diff --git a/.gitignore b/.gitignore
index 72ef86a..2258e90 100644
--- a/.gitignore
+++ b/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 #
 # NOTE! Don't add files that are generated in specific
 # subdirectories here. Add them in the ".gitignore" file
diff --git a/.mailmap b/.mailmap
index 9198a93..db3754a 100644
--- a/.mailmap
+++ b/.mailmap
@@ -210,6 +210,7 @@
 Oleksij Rempel <linux@rempel-privat.de> <fixed-term.Oleksij.Rempel@de.bosch.com>
 Oleksij Rempel <linux@rempel-privat.de> <o.rempel@pengutronix.de>
 Oleksij Rempel <linux@rempel-privat.de> <ore@pengutronix.de>
+Pali Rohár <pali@kernel.org> <pali.rohar@gmail.com>
 Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
 Patrick Mochel <mochel@digitalimplant.org>
 Paul Burton <paulburton@kernel.org> <paul.burton@imgtec.com>
@@ -248,6 +249,7 @@
 Sean Nyekjaer <sean@geanix.com> <sean.nyekjaer@prevas.dk>
 Sebastian Reichel <sre@kernel.org> <sre@debian.org>
 Sebastian Reichel <sre@kernel.org> <sebastian.reichel@collabora.co.uk>
+Sedat Dilek <sedat.dilek@gmail.com> <sedat.dilek@credativ.de>
 Shiraz Hashim <shiraz.linux.kernel@gmail.com> <shiraz.hashim@st.com>
 Shuah Khan <shuah@kernel.org> <shuahkhan@gmail.com>
 Shuah Khan <shuah@kernel.org> <shuah.khan@hp.com>
diff --git a/Documentation/.gitignore b/Documentation/.gitignore
index e74fec8..d6dc7c9 100644
--- a/Documentation/.gitignore
+++ b/Documentation/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 output
 *.pyc
diff --git a/Documentation/ABI/obsolete/sysfs-kernel-fadump_enabled b/Documentation/ABI/obsolete/sysfs-kernel-fadump_enabled
new file mode 100644
index 0000000..e9c2de8
--- /dev/null
+++ b/Documentation/ABI/obsolete/sysfs-kernel-fadump_enabled
@@ -0,0 +1,9 @@
+This ABI is renamed and moved to a new location /sys/kernel/fadump/enabled.
+
+What:		/sys/kernel/fadump_enabled
+Date:		Feb 2012
+Contact:	linuxppc-dev@lists.ozlabs.org
+Description:	read only
+		Primarily used to identify whether the FADump is enabled in
+		the kernel or not.
+User:		Kdump service
diff --git a/Documentation/ABI/obsolete/sysfs-kernel-fadump_registered b/Documentation/ABI/obsolete/sysfs-kernel-fadump_registered
new file mode 100644
index 0000000..0360be3
--- /dev/null
+++ b/Documentation/ABI/obsolete/sysfs-kernel-fadump_registered
@@ -0,0 +1,10 @@
+This ABI is renamed and moved to a new location /sys/kernel/fadump/registered.¬
+
+What:		/sys/kernel/fadump_registered
+Date:		Feb 2012
+Contact:	linuxppc-dev@lists.ozlabs.org
+Description:	read/write
+		Helps to control the dump collect feature from userspace.
+		Setting 1 to this file enables the system to collect the
+		dump and 0 to disable it.
+User:		Kdump service
diff --git a/Documentation/ABI/obsolete/sysfs-kernel-fadump_release_mem b/Documentation/ABI/obsolete/sysfs-kernel-fadump_release_mem
new file mode 100644
index 0000000..6ce0b12
--- /dev/null
+++ b/Documentation/ABI/obsolete/sysfs-kernel-fadump_release_mem
@@ -0,0 +1,10 @@
+This ABI is renamed and moved to a new location /sys/kernel/fadump/release_mem.¬
+
+What:		/sys/kernel/fadump_release_mem
+Date:		Feb 2012
+Contact:	linuxppc-dev@lists.ozlabs.org
+Description:	write only
+		This is a special sysfs file and only available when
+		the system is booted to capture the vmcore using FADump.
+		It is used to release the memory reserved by FADump to
+		save the crash dump.
diff --git a/Documentation/ABI/removed/sysfs-kernel-fadump_release_opalcore b/Documentation/ABI/removed/sysfs-kernel-fadump_release_opalcore
new file mode 100644
index 0000000..a8d46cd
--- /dev/null
+++ b/Documentation/ABI/removed/sysfs-kernel-fadump_release_opalcore
@@ -0,0 +1,9 @@
+This ABI is moved to /sys/firmware/opal/mpipl/release_core.
+
+What:		/sys/kernel/fadump_release_opalcore
+Date:		Sep 2019
+Contact:	linuxppc-dev@lists.ozlabs.org
+Description:	write only
+		The sysfs file is available when the system is booted to
+		collect the dump on OPAL based machine. It used to release
+		the memory used to collect the opalcore.
diff --git a/Documentation/ABI/testing/debugfs-driver-habanalabs b/Documentation/ABI/testing/debugfs-driver-habanalabs
index f0ac14b..a73601c 100644
--- a/Documentation/ABI/testing/debugfs-driver-habanalabs
+++ b/Documentation/ABI/testing/debugfs-driver-habanalabs
@@ -43,6 +43,20 @@
                 If the IOMMU is disabled, it also allows the root user to read
                 or write from the host a device VA of a host mapped memory
 
+What:           /sys/kernel/debug/habanalabs/hl<n>/data64
+Date:           Jan 2020
+KernelVersion:  5.6
+Contact:        oded.gabbay@gmail.com
+Description:    Allows the root user to read or write 64 bit data directly
+                through the device's PCI bar. Writing to this file generates a
+                write transaction while reading from the file generates a read
+                transaction. This custom interface is needed (instead of using
+                the generic Linux user-space PCI mapping) because the DDR bar
+                is very small compared to the DDR memory and only the driver can
+                move the bar before and after the transaction.
+                If the IOMMU is disabled, it also allows the root user to read
+                or write from the host a device VA of a host mapped memory
+
 What:           /sys/kernel/debug/habanalabs/hl<n>/device
 Date:           Jan 2019
 KernelVersion:  5.1
diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-cti b/Documentation/ABI/testing/sysfs-bus-coresight-devices-cti
new file mode 100644
index 0000000..9d11502
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-cti
@@ -0,0 +1,241 @@
+What:		/sys/bus/coresight/devices/<cti-name>/enable
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(RW) Enable/Disable the CTI hardware.
+
+What:		/sys/bus/coresight/devices/<cti-name>/powered
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(R) Indicate if the CTI hardware is powered.
+
+What:		/sys/bus/coresight/devices/<cti-name>/ctmid
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(R) Display the associated CTM ID
+
+What:		/sys/bus/coresight/devices/<cti-name>/nr_trigger_cons
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(R) Number of devices connected to triggers on this CTI
+
+What:		/sys/bus/coresight/devices/<cti-name>/triggers<N>/name
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(R) Name of connected device <N>
+
+What:		/sys/bus/coresight/devices/<cti-name>/triggers<N>/in_signals
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(R) Input trigger signals from connected device <N>
+
+What:		/sys/bus/coresight/devices/<cti-name>/triggers<N>/in_types
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(R) Functional types for the input trigger signals
+		from connected device <N>
+
+What:		/sys/bus/coresight/devices/<cti-name>/triggers<N>/out_signals
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(R) Output trigger signals to connected device <N>
+
+What:		/sys/bus/coresight/devices/<cti-name>/triggers<N>/out_types
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(R) Functional types for the output trigger signals
+		to connected device <N>
+
+What:		/sys/bus/coresight/devices/<cti-name>/regs/inout_sel
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(RW) Select the index for inen and outen registers.
+
+What:		/sys/bus/coresight/devices/<cti-name>/regs/inen
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(RW) Read or write the CTIINEN register selected by inout_sel.
+
+What:		/sys/bus/coresight/devices/<cti-name>/regs/outen
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(RW) Read or write the CTIOUTEN register selected by inout_sel.
+
+What:		/sys/bus/coresight/devices/<cti-name>/regs/gate
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(RW) Read or write CTIGATE register.
+
+What:		/sys/bus/coresight/devices/<cti-name>/regs/asicctl
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(RW) Read or write ASICCTL register.
+
+What:		/sys/bus/coresight/devices/<cti-name>/regs/intack
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(W) Write the INTACK register.
+
+What:		/sys/bus/coresight/devices/<cti-name>/regs/appset
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(RW) Set CTIAPPSET register to activate channel. Read back to
+		determine current value of register.
+
+What:		/sys/bus/coresight/devices/<cti-name>/regs/appclear
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(W) Write APPCLEAR register to deactivate channel.
+
+What:		/sys/bus/coresight/devices/<cti-name>/regs/apppulse
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(W) Write APPPULSE to pulse a channel active for one clock
+		cycle.
+
+What:		/sys/bus/coresight/devices/<cti-name>/regs/chinstatus
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(R) Read current status of channel inputs.
+
+What:		/sys/bus/coresight/devices/<cti-name>/regs/choutstatus
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(R) read current status of channel outputs.
+
+What:		/sys/bus/coresight/devices/<cti-name>/regs/triginstatus
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(R) read current status of input trigger signals
+
+What:		/sys/bus/coresight/devices/<cti-name>/regs/trigoutstatus
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(R) read current status of output trigger signals.
+
+What:		/sys/bus/coresight/devices/<cti-name>/channels/trigin_attach
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(W) Attach a CTI input trigger to a CTM channel.
+
+What:		/sys/bus/coresight/devices/<cti-name>/channels/trigin_detach
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(W) Detach a CTI input trigger from a CTM channel.
+
+What:		/sys/bus/coresight/devices/<cti-name>/channels/trigout_attach
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(W) Attach a CTI output trigger to a CTM channel.
+
+What:		/sys/bus/coresight/devices/<cti-name>/channels/trigout_detach
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(W) Detach a CTI output trigger from a CTM channel.
+
+What:		/sys/bus/coresight/devices/<cti-name>/channels/chan_gate_enable
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(RW) Enable CTIGATE for single channel (W) or list enabled
+		channels through the gate (R).
+
+What:		/sys/bus/coresight/devices/<cti-name>/channels/chan_gate_disable
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(W) Disable CTIGATE for single channel.
+
+What:		/sys/bus/coresight/devices/<cti-name>/channels/chan_set
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(W) Activate a single channel.
+
+What:		/sys/bus/coresight/devices/<cti-name>/channels/chan_clear
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(W) Deactivate a single channel.
+
+What:		/sys/bus/coresight/devices/<cti-name>/channels/chan_pulse
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(W) Pulse a single channel - activate for a single clock cycle.
+
+What:		/sys/bus/coresight/devices/<cti-name>/channels/trigout_filtered
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(R) List of output triggers filtered across all connections.
+
+What:		/sys/bus/coresight/devices/<cti-name>/channels/trig_filter_enable
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(RW) Enable or disable trigger output signal filtering.
+
+What:		/sys/bus/coresight/devices/<cti-name>/channels/chan_inuse
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(R) show channels with at least one attached trigger signal.
+
+What:		/sys/bus/coresight/devices/<cti-name>/channels/chan_free
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(R) show channels with no attached trigger signals.
+
+What:		/sys/bus/coresight/devices/<cti-name>/channels/chan_xtrigs_sel
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(RW) Write channel number to select a channel to view, read to
+		see selected channel number.
+
+What:		/sys/bus/coresight/devices/<cti-name>/channels/chan_xtrigs_in
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(R) Read to see input triggers connected to selected view
+		channel.
+
+What:		/sys/bus/coresight/devices/<cti-name>/channels/chan_xtrigs_out
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(R) Read to see output triggers connected to selected view
+		channel.
+
+What:		/sys/bus/coresight/devices/<cti-name>/channels/chan_xtrigs_reset
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(W) Clear all channel / trigger programming.
diff --git a/Documentation/ABI/testing/sysfs-bus-intel_th-devices-msc b/Documentation/ABI/testing/sysfs-bus-intel_th-devices-msc
index 456cb62..7fd2601 100644
--- a/Documentation/ABI/testing/sysfs-bus-intel_th-devices-msc
+++ b/Documentation/ABI/testing/sysfs-bus-intel_th-devices-msc
@@ -40,3 +40,11 @@
 		triggering a window switch for the buffer. Returns an error in any
 		other operating mode or attempts to write something other than "1".
 
+What:		/sys/bus/intel_th/devices/<intel_th_id>-msc<msc-id>/stop_on_full
+Date:		March 2020
+KernelVersion:	5.7
+Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description:	(RW) Configure whether trace stops when the last available window
+		becomes full (1/y/Y) or wraps around and continues until the next
+		window becomes available again (0/n/N).
+
diff --git a/Documentation/ABI/testing/sysfs-driver-jz4780-efuse b/Documentation/ABI/testing/sysfs-driver-jz4780-efuse
new file mode 100644
index 0000000..bb6f5d6
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-jz4780-efuse
@@ -0,0 +1,16 @@
+What:		/sys/devices/*/<our-device>/nvmem
+Date:		December 2017
+Contact:	PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
+Description:	read-only access to the efuse on the Ingenic JZ4780 SoC
+		The SoC has a one time programmable 8K efuse that is
+		split into segments. The driver supports read only.
+		The segments are
+		0x000   64 bit Random Number
+		0x008  128 bit Ingenic Chip ID
+		0x018  128 bit Customer ID
+		0x028 3520 bit Reserved
+		0x1E0    8 bit Protect Segment
+		0x1E1 2296 bit HDMI Key
+		0x300 2048 bit Security boot key
+Users:		any user space application which wants to read the Chip
+		and Customer ID
diff --git a/Documentation/ABI/testing/sysfs-firmware-opal-sensor-groups b/Documentation/ABI/testing/sysfs-firmware-opal-sensor-groups
new file mode 100644
index 0000000..3a2dfe5
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-firmware-opal-sensor-groups
@@ -0,0 +1,21 @@
+What:		/sys/firmware/opal/sensor_groups
+Date:		August 2017
+Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Description:	Sensor groups directory for POWER9 powernv servers
+
+		Each folder in this directory contains a sensor group
+		which are classified based on type of the sensor
+		like power, temperature, frequency, current, etc. They
+		can also indicate the group of sensors belonging to
+		different owners like CSM, Profiler, Job-Scheduler
+
+What:		/sys/firmware/opal/sensor_groups/<sensor_group_name>/clear
+Date:		August 2017
+Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Description:	Sysfs file to clear the min-max of all the sensors
+		belonging to the group.
+
+		Writing 1 to this file will clear the minimum and
+		maximum values of all the sensors in the group.
+		In POWER9, the min-max of a sensor is the historical minimum
+		and maximum value of the sensor cached by OCC.
diff --git a/Documentation/ABI/testing/sysfs-fs-f2fs b/Documentation/ABI/testing/sysfs-fs-f2fs
index 1a6cd53..bd8a0d1 100644
--- a/Documentation/ABI/testing/sysfs-fs-f2fs
+++ b/Documentation/ABI/testing/sysfs-fs-f2fs
@@ -318,3 +318,8 @@
 Contact:	"Hridya Valsaraju" <hridya@google.com>
 Description:	Average number of valid blocks.
 		Available when CONFIG_F2FS_STAT_FS=y.
+
+What:		/sys/fs/f2fs/<disk>/mounted_time_sec
+Date:		February 2020
+Contact:	"Jaegeuk Kim" <jaegeuk@kernel.org>
+Description:	Show the mounted time in secs of this partition.
diff --git a/Documentation/ABI/testing/sysfs-kernel-fadump b/Documentation/ABI/testing/sysfs-kernel-fadump
new file mode 100644
index 0000000..8f7a64a
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-kernel-fadump
@@ -0,0 +1,40 @@
+What:		/sys/kernel/fadump/*
+Date:		Dec 2019
+Contact:	linuxppc-dev@lists.ozlabs.org
+Description:
+		The /sys/kernel/fadump/* is a collection of FADump sysfs
+		file provide information about the configuration status
+		of Firmware Assisted Dump (FADump).
+
+What:		/sys/kernel/fadump/enabled
+Date:		Dec 2019
+Contact:	linuxppc-dev@lists.ozlabs.org
+Description:	read only
+		Primarily used to identify whether the FADump is enabled in
+		the kernel or not.
+User:		Kdump service
+
+What:		/sys/kernel/fadump/registered
+Date:		Dec 2019
+Contact:	linuxppc-dev@lists.ozlabs.org
+Description:	read/write
+		Helps to control the dump collect feature from userspace.
+		Setting 1 to this file enables the system to collect the
+		dump and 0 to disable it.
+User:		Kdump service
+
+What:		/sys/kernel/fadump/release_mem
+Date:		Dec 2019
+Contact:	linuxppc-dev@lists.ozlabs.org
+Description:	write only
+		This is a special sysfs file and only available when
+		the system is booted to capture the vmcore using FADump.
+		It is used to release the memory reserved by FADump to
+		save the crash dump.
+
+What:		/sys/kernel/fadump/mem_reserved
+Date:		Dec 2019
+Contact:	linuxppc-dev@lists.ozlabs.org
+Description:	read only
+		Provide information about the amount of memory reserved by
+		FADump to save the crash dump in bytes.
diff --git a/Documentation/ABI/testing/sysfs-platform-dell-laptop b/Documentation/ABI/testing/sysfs-platform-dell-laptop
index 8c6a0b8..9b917c7 100644
--- a/Documentation/ABI/testing/sysfs-platform-dell-laptop
+++ b/Documentation/ABI/testing/sysfs-platform-dell-laptop
@@ -2,7 +2,7 @@
 Date:		December 2014
 KernelVersion:	3.19
 Contact:	Gabriele Mazzotta <gabriele.mzt@gmail.com>,
-		Pali Rohár <pali.rohar@gmail.com>
+		Pali Rohár <pali@kernel.org>
 Description:
 		This file allows to control the automatic keyboard
 		illumination mode on some systems that have an ambient
@@ -13,7 +13,7 @@
 Date:		December 2014
 KernelVersion:	3.19
 Contact:	Gabriele Mazzotta <gabriele.mzt@gmail.com>,
-		Pali Rohár <pali.rohar@gmail.com>
+		Pali Rohár <pali@kernel.org>
 Description:
 		This file allows to specifiy the on/off threshold value,
 		as reported by the ambient light sensor.
@@ -22,7 +22,7 @@
 Date:		December 2014
 KernelVersion:	3.19
 Contact:	Gabriele Mazzotta <gabriele.mzt@gmail.com>,
-		Pali Rohár <pali.rohar@gmail.com>
+		Pali Rohár <pali@kernel.org>
 Description:
 		This file allows to control the input triggers that
 		turn on the keyboard backlight illumination that is
@@ -45,7 +45,7 @@
 Date:		December 2014
 KernelVersion:	3.19
 Contact:	Gabriele Mazzotta <gabriele.mzt@gmail.com>,
-		Pali Rohár <pali.rohar@gmail.com>
+		Pali Rohár <pali@kernel.org>
 Description:
 		This file allows to specify the interval after which the
 		keyboard illumination is disabled because of inactivity.
diff --git a/Documentation/PCI/boot-interrupts.rst b/Documentation/PCI/boot-interrupts.rst
new file mode 100644
index 0000000..d078ef3
--- /dev/null
+++ b/Documentation/PCI/boot-interrupts.rst
@@ -0,0 +1,155 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===============
+Boot Interrupts
+===============
+
+:Author: - Sean V Kelley <sean.v.kelley@linux.intel.com>
+
+Overview
+========
+
+On PCI Express, interrupts are represented with either MSI or inbound
+interrupt messages (Assert_INTx/Deassert_INTx). The integrated IO-APIC in a
+given Core IO converts the legacy interrupt messages from PCI Express to
+MSI interrupts.  If the IO-APIC is disabled (via the mask bits in the
+IO-APIC table entries), the messages are routed to the legacy PCH. This
+in-band interrupt mechanism was traditionally necessary for systems that
+did not support the IO-APIC and for boot. Intel in the past has used the
+term "boot interrupts" to describe this mechanism. Further, the PCI Express
+protocol describes this in-band legacy wire-interrupt INTx mechanism for
+I/O devices to signal PCI-style level interrupts. The subsequent paragraphs
+describe problems with the Core IO handling of INTx message routing to the
+PCH and mitigation within BIOS and the OS.
+
+
+Issue
+=====
+
+When in-band legacy INTx messages are forwarded to the PCH, they in turn
+trigger a new interrupt for which the OS likely lacks a handler. When an
+interrupt goes unhandled over time, they are tracked by the Linux kernel as
+Spurious Interrupts. The IRQ will be disabled by the Linux kernel after it
+reaches a specific count with the error "nobody cared". This disabled IRQ
+now prevents valid usage by an existing interrupt which may happen to share
+the IRQ line.
+
+  irq 19: nobody cared (try booting with the "irqpoll" option)
+  CPU: 0 PID: 2988 Comm: irq/34-nipalk Tainted: 4.14.87-rt49-02410-g4a640ec-dirty #1
+  Hardware name: National Instruments NI PXIe-8880/NI PXIe-8880, BIOS 2.1.5f1 01/09/2020
+  Call Trace:
+  <IRQ>
+   ? dump_stack+0x46/0x5e
+   ? __report_bad_irq+0x2e/0xb0
+   ? note_interrupt+0x242/0x290
+   ? nNIKAL100_memoryRead16+0x8/0x10 [nikal]
+   ? handle_irq_event_percpu+0x55/0x70
+   ? handle_irq_event+0x4f/0x80
+   ? handle_fasteoi_irq+0x81/0x180
+   ? handle_irq+0x1c/0x30
+   ? do_IRQ+0x41/0xd0
+   ? common_interrupt+0x84/0x84
+  </IRQ>
+
+  handlers:
+  irq_default_primary_handler threaded usb_hcd_irq
+  Disabling IRQ #19
+
+
+Conditions
+==========
+
+The use of threaded interrupts is the most likely condition to trigger
+this problem today. Threaded interrupts may not be reenabled after the IRQ
+handler wakes. These "one shot" conditions mean that the threaded interrupt
+needs to keep the interrupt line masked until the threaded handler has run.
+Especially when dealing with high data rate interrupts, the thread needs to
+run to completion; otherwise some handlers will end up in stack overflows
+since the interrupt of the issuing device is still active.
+
+Affected Chipsets
+=================
+
+The legacy interrupt forwarding mechanism exists today in a number of
+devices including but not limited to chipsets from AMD/ATI, Broadcom, and
+Intel. Changes made through the mitigations below have been applied to
+drivers/pci/quirks.c
+
+Starting with ICX there are no longer any IO-APICs in the Core IO's
+devices.  IO-APIC is only in the PCH.  Devices connected to the Core IO's
+PCIe Root Ports will use native MSI/MSI-X mechanisms.
+
+Mitigations
+===========
+
+The mitigations take the form of PCI quirks. The preference has been to
+first identify and make use of a means to disable the routing to the PCH.
+In such a case a quirk to disable boot interrupt generation can be
+added.[1]
+
+  Intel® 6300ESB I/O Controller Hub
+  Alternate Base Address Register:
+   BIE: Boot Interrupt Enable
+	  0 = Boot interrupt is enabled.
+	  1 = Boot interrupt is disabled.
+
+  Intel® Sandy Bridge through Sky Lake based Xeon servers:
+  Coherent Interface Protocol Interrupt Control
+   dis_intx_route2pch/dis_intx_route2ich/dis_intx_route2dmi2:
+	  When this bit is set. Local INTx messages received from the
+	  Intel® Quick Data DMA/PCI Express ports are not routed to legacy
+	  PCH - they are either converted into MSI via the integrated IO-APIC
+	  (if the IO-APIC mask bit is clear in the appropriate entries)
+	  or cause no further action (when mask bit is set)
+
+In the absence of a way to directly disable the routing, another approach
+has been to make use of PCI Interrupt pin to INTx routing tables for
+purposes of redirecting the interrupt handler to the rerouted interrupt
+line by default.  Therefore, on chipsets where this INTx routing cannot be
+disabled, the Linux kernel will reroute the valid interrupt to its legacy
+interrupt. This redirection of the handler will prevent the occurrence of
+the spurious interrupt detection which would ordinarily disable the IRQ
+line due to excessive unhandled counts.[2]
+
+The config option X86_REROUTE_FOR_BROKEN_BOOT_IRQS exists to enable (or
+disable) the redirection of the interrupt handler to the PCH interrupt
+line. The option can be overridden by either pci=ioapicreroute or
+pci=noioapicreroute.[3]
+
+
+More Documentation
+==================
+
+There is an overview of the legacy interrupt handling in several datasheets
+(6300ESB and 6700PXH below). While largely the same, it provides insight
+into the evolution of its handling with chipsets.
+
+Example of disabling of the boot interrupt
+------------------------------------------
+
+Intel® 6300ESB I/O Controller Hub (Document # 300641-004US)
+	5.7.3 Boot Interrupt
+	https://www.intel.com/content/dam/doc/datasheet/6300esb-io-controller-hub-datasheet.pdf
+
+Intel® Xeon® Processor E5-1600/2400/2600/4600 v3 Product Families
+Datasheet - Volume 2: Registers (Document # 330784-003)
+	6.6.41 cipintrc Coherent Interface Protocol Interrupt Control
+	https://www.intel.com/content/dam/www/public/us/en/documents/datasheets/xeon-e5-v3-datasheet-vol-2.pdf
+
+Example of handler rerouting
+----------------------------
+
+Intel® 6700PXH 64-bit PCI Hub (Document # 302628)
+	2.15.2 PCI Express Legacy INTx Support and Boot Interrupt
+	https://www.intel.com/content/dam/doc/datasheet/6700pxh-64-bit-pci-hub-datasheet.pdf
+
+
+If you have any legacy PCI interrupt questions that aren't answered, email me.
+
+Cheers,
+    Sean V Kelley
+    sean.v.kelley@linux.intel.com
+
+[1] https://lore.kernel.org/r/12131949181903-git-send-email-sassmann@suse.de/
+[2] https://lore.kernel.org/r/12131949182094-git-send-email-sassmann@suse.de/
+[3] https://lore.kernel.org/r/487C8EA7.6020205@suse.de/
diff --git a/Documentation/PCI/index.rst b/Documentation/PCI/index.rst
index 6768305..8f66fea 100644
--- a/Documentation/PCI/index.rst
+++ b/Documentation/PCI/index.rst
@@ -16,3 +16,4 @@
    pci-error-recovery
    pcieaer-howto
    endpoint/index
+   boot-interrupts
diff --git a/Documentation/PCI/pcieaer-howto.rst b/Documentation/PCI/pcieaer-howto.rst
index 18bdefa..0b36b9eb 100644
--- a/Documentation/PCI/pcieaer-howto.rst
+++ b/Documentation/PCI/pcieaer-howto.rst
@@ -156,12 +156,6 @@
 have different specifications to reset pci express link, so all
 upstream ports should provide their own reset_link functions.
 
-In struct pcie_port_service_driver, a new pointer, reset_link, is
-added.
-::
-
-	pci_ers_result_t (*reset_link) (struct pci_dev *dev);
-
 Section 3.2.2.2 provides more detailed info on when to call
 reset_link.
 
@@ -212,15 +206,10 @@
 a hierarchy in question. Then, performing link reset at upstream is
 necessary. As different kinds of devices might use different approaches
 to reset link, AER port service driver is required to provide the
-function to reset link. Firstly, kernel looks for if the upstream
-component has an aer driver. If it has, kernel uses the reset_link
-callback of the aer driver. If the upstream component has no aer driver
-and the port is downstream port, we will perform a hot reset as the
-default by setting the Secondary Bus Reset bit of the Bridge Control
-register associated with the downstream port. As for upstream ports,
-they should provide their own aer service drivers with reset_link
-function. If error_detected returns PCI_ERS_RESULT_CAN_RECOVER and
-reset_link returns PCI_ERS_RESULT_RECOVERED, the error handling goes
+function to reset link via callback parameter of pcie_do_recovery()
+function. If reset_link is not NULL, recovery function will use it
+to reset the link. If error_detected returns PCI_ERS_RESULT_CAN_RECOVER
+and reset_link returns PCI_ERS_RESULT_RECOVERED, the error handling goes
 to mmio_enabled.
 
 helper functions
@@ -243,9 +232,9 @@
 
 ::
 
-  int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev);`
+  int pci_aer_clear_nonfatal_status(struct pci_dev *dev);`
 
-pci_cleanup_aer_uncorrect_error_status cleanups the uncorrectable
+pci_aer_clear_nonfatal_status clears non-fatal errors in the uncorrectable
 error status register.
 
 Frequent Asked Questions
diff --git a/Documentation/admin-guide/binderfs.rst b/Documentation/admin-guide/binderfs.rst
index c009671..8243af9 100644
--- a/Documentation/admin-guide/binderfs.rst
+++ b/Documentation/admin-guide/binderfs.rst
@@ -33,6 +33,12 @@
   a per-instance limit. If ``max=<count>`` is set then only ``<count>`` number
   of binder devices can be allocated in this binderfs instance.
 
+stats
+  Using ``stats=global`` enables global binder statistics.
+  ``stats=global`` is only available for a binderfs instance mounted in the
+  initial user namespace. An attempt to use the option to mount a binderfs
+  instance in another user namespace will return a permission error.
+
 Allocating binder Devices
 -------------------------
 
diff --git a/Documentation/admin-guide/cgroup-v1/cpusets.rst b/Documentation/admin-guide/cgroup-v1/cpusets.rst
index 86a6ae9..7ade3ab 100644
--- a/Documentation/admin-guide/cgroup-v1/cpusets.rst
+++ b/Documentation/admin-guide/cgroup-v1/cpusets.rst
@@ -223,6 +223,17 @@
 automatically tracks the value of node_states[N_MEMORY]--i.e.,
 nodes with memory--using the cpuset_track_online_nodes() hook.
 
+The cpuset.effective_cpus and cpuset.effective_mems files are
+normally read-only copies of cpuset.cpus and cpuset.mems files
+respectively.  If the cpuset cgroup filesystem is mounted with the
+special "cpuset_v2_mode" option, the behavior of these files will become
+similar to the corresponding files in cpuset v2.  In other words, hotplug
+events will not change cpuset.cpus and cpuset.mems.  Those events will
+only affect cpuset.effective_cpus and cpuset.effective_mems which show
+the actual cpus and memory nodes that are currently used by this cpuset.
+See Documentation/admin-guide/cgroup-v2.rst for more information about
+cpuset v2 behavior.
+
 
 1.4 What are exclusive cpusets ?
 --------------------------------
diff --git a/Documentation/admin-guide/dynamic-debug-howto.rst b/Documentation/admin-guide/dynamic-debug-howto.rst
index 252e5ef..0dc2eb8 100644
--- a/Documentation/admin-guide/dynamic-debug-howto.rst
+++ b/Documentation/admin-guide/dynamic-debug-howto.rst
@@ -54,6 +54,9 @@
 				<debugfs>/dynamic_debug/control
   -bash: echo: write error: Invalid argument
 
+Note, for systems without 'debugfs' enabled, the control file can be
+found in ``/proc/dynamic_debug/control``.
+
 Viewing Dynamic Debug Behaviour
 ===============================
 
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 4d5a4fe..f2a93c8 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -22,11 +22,13 @@
 			default: 0
 
 	acpi_backlight=	[HW,ACPI]
-			acpi_backlight=vendor
-			acpi_backlight=video
-			If set to vendor, prefer vendor specific driver
+			{ vendor | video | native | none }
+			If set to vendor, prefer vendor-specific driver
 			(e.g. thinkpad_acpi, sony_acpi, etc.) instead
 			of the ACPI video.ko driver.
+			If set to video, use the ACPI video.ko driver.
+			If set to native, use the device's native backlight mode.
+			If set to none, disable the ACPI backlight interface.
 
 	acpi_force_32bit_fadt_addr
 			force FADT to use 32 bit addresses rather than the
@@ -683,7 +685,7 @@
 	coredump_filter=
 			[KNL] Change the default value for
 			/proc/<pid>/coredump_filter.
-			See also Documentation/filesystems/proc.txt.
+			See also Documentation/filesystems/proc.rst.
 
 	coresight_cpu_debug.enable
 			[ARM,ARM64]
@@ -960,7 +962,7 @@
 			edid/1680x1050.bin, or edid/1920x1080.bin is given
 			and no file with the same name exists. Details and
 			instructions how to build your own EDID data are
-			available in Documentation/driver-api/edid.rst. An EDID
+			available in Documentation/admin-guide/edid.rst. An EDID
 			data set will only be used for a particular connector,
 			if its name and a colon are prepended to the EDID
 			name. Each connector may use a unique EDID data
@@ -990,10 +992,6 @@
 			Documentation/admin-guide/dynamic-debug-howto.rst
 			for details.
 
-	nompx		[X86] Disables Intel Memory Protection Extensions.
-			See Documentation/x86/intel_mpx.rst for more
-			information about the feature.
-
 	nopku		[X86] Disable Memory Protection Keys CPU feature found
 			in some Intel CPUs.
 
@@ -1473,6 +1471,14 @@
 	hpet_mmap=	[X86, HPET_MMAP] Allow userspace to mmap HPET
 			registers.  Default set by CONFIG_HPET_MMAP_DEFAULT.
 
+	hugetlb_cma=	[HW] The size of a cma area used for allocation
+			of gigantic hugepages.
+			Format: nn[KMGTPE]
+
+			Reserve a cma area of given size and allocate gigantic
+			hugepages using the cma allocator. If enabled, the
+			boot-time allocation of gigantic hugepages is skipped.
+
 	hugepages=	[HW,X86-32,IA-64] HugeTLB pages to allocate at boot.
 	hugepagesz=	[HW,IA-64,PPC,X86-64] The size of the HugeTLB pages.
 			On x86-64 and powerpc, this option can be specified
@@ -2571,13 +2577,22 @@
 			For details see: Documentation/admin-guide/hw-vuln/mds.rst
 
 	mem=nn[KMG]	[KNL,BOOT] Force usage of a specific amount of memory
-			Amount of memory to be used when the kernel is not able
-			to see the whole system memory or for test.
+			Amount of memory to be used in cases as follows:
+
+			1 for test;
+			2 when the kernel is not able to see the whole system memory;
+			3 memory that lies after 'mem=' boundary is excluded from
+			 the hypervisor, then assigned to KVM guests.
+
 			[X86] Work as limiting max address. Use together
 			with memmap= to avoid physical address space collisions.
 			Without memmap= PCI devices could be placed at addresses
 			belonging to unused RAM.
 
+			Note that this only takes effects during boot time since
+			in above case 3, memory may need be hot added after boot
+			if system memory of hypervisor is not sufficient.
+
 	mem=nopentium	[BUGS=X86-32] Disable usage of 4MB pages for kernel
 			memory.
 
@@ -3720,6 +3735,9 @@
 			Override pmtimer IOPort with a hex value.
 			e.g. pmtmr=0x508
 
+	pm_debug_messages	[SUSPEND,KNL]
+			Enable suspend/resume debug messages during boot up.
+
 	pnp.debug=1	[PNP]
 			Enable PNP debug messages (depends on the
 			CONFIG_PNP_DEBUG_MESSAGES option).  Change at run-time
diff --git a/Documentation/admin-guide/mm/transhuge.rst b/Documentation/admin-guide/mm/transhuge.rst
index bd57145..2f31de8 100644
--- a/Documentation/admin-guide/mm/transhuge.rst
+++ b/Documentation/admin-guide/mm/transhuge.rst
@@ -310,6 +310,11 @@
 	is incremented if a page fault fails to allocate
 	a huge page and instead falls back to using small pages.
 
+thp_fault_fallback_charge
+	is incremented if a page fault fails to charge a huge page and
+	instead falls back to using small pages even though the
+	allocation was successful.
+
 thp_collapse_alloc_failed
 	is incremented if khugepaged found a range
 	of pages that should be collapsed into one huge page but failed
@@ -319,6 +324,15 @@
 	is incremented every time a file huge page is successfully
 	allocated.
 
+thp_file_fallback
+	is incremented if a file huge page is attempted to be allocated
+	but fails and instead falls back to using small pages.
+
+thp_file_fallback_charge
+	is incremented if a file huge page cannot be charged and instead
+	falls back to using small pages even though the allocation was
+	successful.
+
 thp_file_mapped
 	is incremented every time a file huge page is mapped into
 	user address space.
diff --git a/Documentation/admin-guide/mm/userfaultfd.rst b/Documentation/admin-guide/mm/userfaultfd.rst
index 5048cf6..c30176e 100644
--- a/Documentation/admin-guide/mm/userfaultfd.rst
+++ b/Documentation/admin-guide/mm/userfaultfd.rst
@@ -108,6 +108,57 @@
 half copied page since it'll keep userfaulting until the copy has
 finished.
 
+Notes:
+
+- If you requested UFFDIO_REGISTER_MODE_MISSING when registering then
+  you must provide some kind of page in your thread after reading from
+  the uffd.  You must provide either UFFDIO_COPY or UFFDIO_ZEROPAGE.
+  The normal behavior of the OS automatically providing a zero page on
+  an annonymous mmaping is not in place.
+
+- None of the page-delivering ioctls default to the range that you
+  registered with.  You must fill in all fields for the appropriate
+  ioctl struct including the range.
+
+- You get the address of the access that triggered the missing page
+  event out of a struct uffd_msg that you read in the thread from the
+  uffd.  You can supply as many pages as you want with UFFDIO_COPY or
+  UFFDIO_ZEROPAGE.  Keep in mind that unless you used DONTWAKE then
+  the first of any of those IOCTLs wakes up the faulting thread.
+
+- Be sure to test for all errors including (pollfd[0].revents &
+  POLLERR).  This can happen, e.g. when ranges supplied were
+  incorrect.
+
+Write Protect Notifications
+---------------------------
+
+This is equivalent to (but faster than) using mprotect and a SIGSEGV
+signal handler.
+
+Firstly you need to register a range with UFFDIO_REGISTER_MODE_WP.
+Instead of using mprotect(2) you use ioctl(uffd, UFFDIO_WRITEPROTECT,
+struct *uffdio_writeprotect) while mode = UFFDIO_WRITEPROTECT_MODE_WP
+in the struct passed in.  The range does not default to and does not
+have to be identical to the range you registered with.  You can write
+protect as many ranges as you like (inside the registered range).
+Then, in the thread reading from uffd the struct will have
+msg.arg.pagefault.flags & UFFD_PAGEFAULT_FLAG_WP set. Now you send
+ioctl(uffd, UFFDIO_WRITEPROTECT, struct *uffdio_writeprotect) again
+while pagefault.mode does not have UFFDIO_WRITEPROTECT_MODE_WP set.
+This wakes up the thread which will continue to run with writes. This
+allows you to do the bookkeeping about the write in the uffd reading
+thread before the ioctl.
+
+If you registered with both UFFDIO_REGISTER_MODE_MISSING and
+UFFDIO_REGISTER_MODE_WP then you need to think about the sequence in
+which you supply a page and undo write protect.  Note that there is a
+difference between writes into a WP area and into a !WP area.  The
+former will have UFFD_PAGEFAULT_FLAG_WP set, the latter
+UFFD_PAGEFAULT_FLAG_WRITE.  The latter did not fail on protection but
+you still need to supply a page when UFFDIO_REGISTER_MODE_MISSING was
+used.
+
 QEMU/KVM
 ========
 
diff --git a/Documentation/admin-guide/pm/suspend-flows.rst b/Documentation/admin-guide/pm/suspend-flows.rst
new file mode 100644
index 0000000..c479d74
--- /dev/null
+++ b/Documentation/admin-guide/pm/suspend-flows.rst
@@ -0,0 +1,270 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: <isonum.txt>
+
+=========================
+System Suspend Code Flows
+=========================
+
+:Copyright: |copy| 2020 Intel Corporation
+
+:Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+
+At least one global system-wide transition needs to be carried out for the
+system to get from the working state into one of the supported
+:doc:`sleep states <sleep-states>`.  Hibernation requires more than one
+transition to occur for this purpose, but the other sleep states, commonly
+referred to as *system-wide suspend* (or simply *system suspend*) states, need
+only one.
+
+For those sleep states, the transition from the working state of the system into
+the target sleep state is referred to as *system suspend* too (in the majority
+of cases, whether this means a transition or a sleep state of the system should
+be clear from the context) and the transition back from the sleep state into the
+working state is referred to as *system resume*.
+
+The kernel code flows associated with the suspend and resume transitions for
+different sleep states of the system are quite similar, but there are some
+significant differences between the :ref:`suspend-to-idle <s2idle>` code flows
+and the code flows related to the :ref:`suspend-to-RAM <s2ram>` and
+:ref:`standby <standby>` sleep states.
+
+The :ref:`suspend-to-RAM <s2ram>` and :ref:`standby <standby>` sleep states
+cannot be implemented without platform support and the difference between them
+boils down to the platform-specific actions carried out by the suspend and
+resume hooks that need to be provided by the platform driver to make them
+available.  Apart from that, the suspend and resume code flows for these sleep
+states are mostly identical, so they both together will be referred to as
+*platform-dependent suspend* states in what follows.
+
+
+.. _s2idle_suspend:
+
+Suspend-to-idle Suspend Code Flow
+=================================
+
+The following steps are taken in order to transition the system from the working
+state to the :ref:`suspend-to-idle <s2idle>` sleep state:
+
+ 1. Invoking system-wide suspend notifiers.
+
+    Kernel subsystems can register callbacks to be invoked when the suspend
+    transition is about to occur and when the resume transition has finished.
+
+    That allows them to prepare for the change of the system state and to clean
+    up after getting back to the working state.
+
+ 2. Freezing tasks.
+
+    Tasks are frozen primarily in order to avoid unchecked hardware accesses
+    from user space through MMIO regions or I/O registers exposed directly to
+    it and to prevent user space from entering the kernel while the next step
+    of the transition is in progress (which might have been problematic for
+    various reasons).
+
+    All user space tasks are intercepted as though they were sent a signal and
+    put into uninterruptible sleep until the end of the subsequent system resume
+    transition.
+
+    The kernel threads that choose to be frozen during system suspend for
+    specific reasons are frozen subsequently, but they are not intercepted.
+    Instead, they are expected to periodically check whether or not they need
+    to be frozen and to put themselves into uninterruptible sleep if so.  [Note,
+    however, that kernel threads can use locking and other concurrency controls
+    available in kernel space to synchronize themselves with system suspend and
+    resume, which can be much more precise than the freezing, so the latter is
+    not a recommended option for kernel threads.]
+
+ 3. Suspending devices and reconfiguring IRQs.
+
+    Devices are suspended in four phases called *prepare*, *suspend*,
+    *late suspend* and *noirq suspend* (see :ref:`driverapi_pm_devices` for more
+    information on what exactly happens in each phase).
+
+    Every device is visited in each phase, but typically it is not physically
+    accessed in more than two of them.
+
+    The runtime PM API is disabled for every device during the *late* suspend
+    phase and high-level ("action") interrupt handlers are prevented from being
+    invoked before the *noirq* suspend phase.
+
+    Interrupts are still handled after that, but they are only acknowledged to
+    interrupt controllers without performing any device-specific actions that
+    would be triggered in the working state of the system (those actions are
+    deferred till the subsequent system resume transition as described
+    `below <s2idle_resume_>`_).
+
+    IRQs associated with system wakeup devices are "armed" so that the resume
+    transition of the system is started when one of them signals an event.
+
+ 4. Freezing the scheduler tick and suspending timekeeping.
+
+    When all devices have been suspended, CPUs enter the idle loop and are put
+    into the deepest available idle state.  While doing that, each of them
+    "freezes" its own scheduler tick so that the timer events associated with
+    the tick do not occur until the CPU is woken up by another interrupt source.
+
+    The last CPU to enter the idle state also stops the timekeeping which
+    (among other things) prevents high resolution timers from triggering going
+    forward until the first CPU that is woken up restarts the timekeeping.
+    That allows the CPUs to stay in the deep idle state relatively long in one
+    go.
+
+    From this point on, the CPUs can only be woken up by non-timer hardware
+    interrupts.  If that happens, they go back to the idle state unless the
+    interrupt that woke up one of them comes from an IRQ that has been armed for
+    system wakeup, in which case the system resume transition is started.
+
+
+.. _s2idle_resume:
+
+Suspend-to-idle Resume Code Flow
+================================
+
+The following steps are taken in order to transition the system from the
+:ref:`suspend-to-idle <s2idle>` sleep state into the working state:
+
+ 1. Resuming timekeeping and unfreezing the scheduler tick.
+
+    When one of the CPUs is woken up (by a non-timer hardware interrupt), it
+    leaves the idle state entered in the last step of the preceding suspend
+    transition, restarts the timekeeping (unless it has been restarted already
+    by another CPU that woke up earlier) and the scheduler tick on that CPU is
+    unfrozen.
+
+    If the interrupt that has woken up the CPU was armed for system wakeup,
+    the system resume transition begins.
+
+ 2. Resuming devices and restoring the working-state configuration of IRQs.
+
+    Devices are resumed in four phases called *noirq resume*, *early resume*,
+    *resume* and *complete* (see :ref:`driverapi_pm_devices` for more
+    information on what exactly happens in each phase).
+
+    Every device is visited in each phase, but typically it is not physically
+    accessed in more than two of them.
+
+    The working-state configuration of IRQs is restored after the *noirq* resume
+    phase and the runtime PM API is re-enabled for every device whose driver
+    supports it during the *early* resume phase.
+
+ 3. Thawing tasks.
+
+    Tasks frozen in step 2 of the preceding `suspend <s2idle_suspend_>`_
+    transition are "thawed", which means that they are woken up from the
+    uninterruptible sleep that they went into at that time and user space tasks
+    are allowed to exit the kernel.
+
+ 4. Invoking system-wide resume notifiers.
+
+    This is analogous to step 1 of the `suspend <s2idle_suspend_>`_ transition
+    and the same set of callbacks is invoked at this point, but a different
+    "notification type" parameter value is passed to them.
+
+
+Platform-dependent Suspend Code Flow
+====================================
+
+The following steps are taken in order to transition the system from the working
+state to platform-dependent suspend state:
+
+ 1. Invoking system-wide suspend notifiers.
+
+    This step is the same as step 1 of the suspend-to-idle suspend transition
+    described `above <s2idle_suspend_>`_.
+
+ 2. Freezing tasks.
+
+    This step is the same as step 2 of the suspend-to-idle suspend transition
+    described `above <s2idle_suspend_>`_.
+
+ 3. Suspending devices and reconfiguring IRQs.
+
+    This step is analogous to step 3 of the suspend-to-idle suspend transition
+    described `above <s2idle_suspend_>`_, but the arming of IRQs for system
+    wakeup generally does not have any effect on the platform.
+
+    There are platforms that can go into a very deep low-power state internally
+    when all CPUs in them are in sufficiently deep idle states and all I/O
+    devices have been put into low-power states.  On those platforms,
+    suspend-to-idle can reduce system power very effectively.
+
+    On the other platforms, however, low-level components (like interrupt
+    controllers) need to be turned off in a platform-specific way (implemented
+    in the hooks provided by the platform driver) to achieve comparable power
+    reduction.
+
+    That usually prevents in-band hardware interrupts from waking up the system,
+    which must be done in a special platform-dependent way.  Then, the
+    configuration of system wakeup sources usually starts when system wakeup
+    devices are suspended and is finalized by the platform suspend hooks later
+    on.
+
+ 4. Disabling non-boot CPUs.
+
+    On some platforms the suspend hooks mentioned above must run in a one-CPU
+    configuration of the system (in particular, the hardware cannot be accessed
+    by any code running in parallel with the platform suspend hooks that may,
+    and often do, trap into the platform firmware in order to finalize the
+    suspend transition).
+
+    For this reason, the CPU offline/online (CPU hotplug) framework is used
+    to take all of the CPUs in the system, except for one (the boot CPU),
+    offline (typically, the CPUs that have been taken offline go into deep idle
+    states).
+
+    This means that all tasks are migrated away from those CPUs and all IRQs are
+    rerouted to the only CPU that remains online.
+
+ 5. Suspending core system components.
+
+    This prepares the core system components for (possibly) losing power going
+    forward and suspends the timekeeping.
+
+ 6. Platform-specific power removal.
+
+    This is expected to remove power from all of the system components except
+    for the memory controller and RAM (in order to preserve the contents of the
+    latter) and some devices designated for system wakeup.
+
+    In many cases control is passed to the platform firmware which is expected
+    to finalize the suspend transition as needed.
+
+
+Platform-dependent Resume Code Flow
+===================================
+
+The following steps are taken in order to transition the system from a
+platform-dependent suspend state into the working state:
+
+ 1. Platform-specific system wakeup.
+
+    The platform is woken up by a signal from one of the designated system
+    wakeup devices (which need not be an in-band hardware interrupt)  and
+    control is passed back to the kernel (the working configuration of the
+    platform may need to be restored by the platform firmware before the
+    kernel gets control again).
+
+ 2. Resuming core system components.
+
+    The suspend-time configuration of the core system components is restored and
+    the timekeeping is resumed.
+
+ 3. Re-enabling non-boot CPUs.
+
+    The CPUs disabled in step 4 of the preceding suspend transition are taken
+    back online and their suspend-time configuration is restored.
+
+ 4. Resuming devices and restoring the working-state configuration of IRQs.
+
+    This step is the same as step 2 of the suspend-to-idle suspend transition
+    described `above <s2idle_resume_>`_.
+
+ 5. Thawing tasks.
+
+    This step is the same as step 3 of the suspend-to-idle suspend transition
+    described `above <s2idle_resume_>`_.
+
+ 6. Invoking system-wide resume notifiers.
+
+    This step is the same as step 4 of the suspend-to-idle suspend transition
+    described `above <s2idle_resume_>`_.
diff --git a/Documentation/admin-guide/pm/system-wide.rst b/Documentation/admin-guide/pm/system-wide.rst
index 2b1f987..1a1924d 100644
--- a/Documentation/admin-guide/pm/system-wide.rst
+++ b/Documentation/admin-guide/pm/system-wide.rst
@@ -8,3 +8,4 @@
    :maxdepth: 2
 
    sleep-states
+   suspend-flows
diff --git a/Documentation/admin-guide/sysctl/kernel.rst b/Documentation/admin-guide/sysctl/kernel.rst
index 335696d..0d427fd 100644
--- a/Documentation/admin-guide/sysctl/kernel.rst
+++ b/Documentation/admin-guide/sysctl/kernel.rst
@@ -390,9 +390,17 @@
 modprobe
 ========
 
-This gives the full path of the modprobe command which the kernel will
-use to load modules. This can be used to debug module loading
-requests::
+The full path to the usermode helper for autoloading kernel modules,
+by default "/sbin/modprobe".  This binary is executed when the kernel
+requests a module.  For example, if userspace passes an unknown
+filesystem type to mount(), then the kernel will automatically request
+the corresponding filesystem module by executing this usermode helper.
+This usermode helper should insert the needed module into the kernel.
+
+This sysctl only affects module autoloading.  It has no effect on the
+ability to explicitly insert modules.
+
+This sysctl can be used to debug module loading requests::
 
     echo '#! /bin/sh' > /tmp/modprobe
     echo 'echo "$@" >> /tmp/modprobe.log' >> /tmp/modprobe
@@ -400,10 +408,15 @@
     chmod a+x /tmp/modprobe
     echo /tmp/modprobe > /proc/sys/kernel/modprobe
 
-This only applies when the *kernel* is requesting that the module be
-loaded; it won't have any effect if the module is being loaded
-explicitly using ``modprobe`` from userspace.
+Alternatively, if this sysctl is set to the empty string, then module
+autoloading is completely disabled.  The kernel will not try to
+execute a usermode helper at all, nor will it call the
+kernel_module_request LSM hook.
 
+If CONFIG_STATIC_USERMODEHELPER=y is set in the kernel configuration,
+then the configured static usermode helper overrides this sysctl,
+except that the empty string is still accepted to completely disable
+module autoloading as described above.
 
 modules_disabled
 ================
@@ -446,7 +459,6 @@
      successful IPC object allocation. If an IPC object allocation syscall
      fails, it is undefined if the value remains unmodified or is reset to -1.
 
-
 nmi_watchdog
 ============
 
diff --git a/Documentation/admin-guide/sysctl/user.rst b/Documentation/admin-guide/sysctl/user.rst
index 650eaa0..c458245 100644
--- a/Documentation/admin-guide/sysctl/user.rst
+++ b/Documentation/admin-guide/sysctl/user.rst
@@ -65,6 +65,12 @@
   The maximum number of pid namespaces that any user in the current
   user namespace may create.
 
+max_time_namespaces
+===================
+
+  The maximum number of time namespaces that any user in the current
+  user namespace may create.
+
 max_user_namespaces
 ===================
 
diff --git a/Documentation/admin-guide/sysrq.rst b/Documentation/admin-guide/sysrq.rst
index 72b2cfb..a46209f 100644
--- a/Documentation/admin-guide/sysrq.rst
+++ b/Documentation/admin-guide/sysrq.rst
@@ -48,9 +48,10 @@
 How do I use the magic SysRq key?
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-On x86   - You press the key combo :kbd:`ALT-SysRq-<command key>`.
+On x86
+	You press the key combo :kbd:`ALT-SysRq-<command key>`.
 
-.. note::
+	.. note::
 	   Some
            keyboards may not have a key labeled 'SysRq'. The 'SysRq' key is
            also known as the 'Print Screen' key. Also some keyboards cannot
@@ -58,14 +59,15 @@
 	   have better luck with press :kbd:`Alt`, press :kbd:`SysRq`,
 	   release :kbd:`SysRq`, press :kbd:`<command key>`, release everything.
 
-On SPARC - You press :kbd:`ALT-STOP-<command key>`, I believe.
+On SPARC
+	You press :kbd:`ALT-STOP-<command key>`, I believe.
 
 On the serial console (PC style standard serial ports only)
         You send a ``BREAK``, then within 5 seconds a command key. Sending
         ``BREAK`` twice is interpreted as a normal BREAK.
 
 On PowerPC
-	Press :kbd:`ALT - Print Screen` (or :kbd:`F13`) - :kbd:`<command key>`,
+	Press :kbd:`ALT - Print Screen` (or :kbd:`F13`) - :kbd:`<command key>`.
         :kbd:`Print Screen` (or :kbd:`F13`) - :kbd:`<command key>` may suffice.
 
 On other
@@ -73,7 +75,7 @@
         let me know so I can add them to this section.
 
 On all
-	write a character to /proc/sysrq-trigger.  e.g.::
+	Write a character to /proc/sysrq-trigger.  e.g.::
 
 		echo t > /proc/sysrq-trigger
 
@@ -282,7 +284,7 @@
 Credits
 ~~~~~~~
 
-Written by Mydraal <vulpyne@vulpyne.net>
-Updated by Adam Sulmicki <adam@cfar.umd.edu>
-Updated by Jeremy M. Dolan <jmd@turbogeek.org> 2001/01/28 10:15:59
-Added to by Crutcher Dunnavant <crutcher+kernel@datastacks.com>
+- Written by Mydraal <vulpyne@vulpyne.net>
+- Updated by Adam Sulmicki <adam@cfar.umd.edu>
+- Updated by Jeremy M. Dolan <jmd@turbogeek.org> 2001/01/28 10:15:59
+- Added to by Crutcher Dunnavant <crutcher+kernel@datastacks.com>
diff --git a/Documentation/core-api/timekeeping.rst b/Documentation/core-api/timekeeping.rst
index c0ffa30..729e248 100644
--- a/Documentation/core-api/timekeeping.rst
+++ b/Documentation/core-api/timekeeping.rst
@@ -154,9 +154,9 @@
 
 	Use ktime_get() or ktime_get_ts64() instead.
 
-.. c:function:: struct timeval do_gettimeofday( void )
-		struct timespec getnstimeofday( void )
-		struct timespec64 getnstimeofday64( void )
+.. c:function:: void do_gettimeofday( struct timeval * )
+		void getnstimeofday( struct timespec * )
+		void getnstimeofday64( struct timespec64 * )
 		void ktime_get_real_ts( struct timespec * )
 
 	ktime_get_real_ts64() is a direct replacement, but consider using
diff --git a/Documentation/devicetree/bindings/.gitignore b/Documentation/devicetree/bindings/.gitignore
index 57afa15..5c6d8ea 100644
--- a/Documentation/devicetree/bindings/.gitignore
+++ b/Documentation/devicetree/bindings/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 *.example.dts
 processed-schema*.yaml
diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml
index e4131fa..5723813 100644
--- a/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml
+++ b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml
@@ -21,6 +21,8 @@
 required:
   - compatible
 
+additionalProperties: false
+
 examples:
   - |
     clkmgr@ffd04000 {
diff --git a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml
index 853d7d2..66213bd 100644
--- a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml
@@ -43,6 +43,8 @@
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     ao-secure@140 {
diff --git a/Documentation/devicetree/bindings/arm/arm,integrator.yaml b/Documentation/devicetree/bindings/arm/arm,integrator.yaml
new file mode 100644
index 0000000..192ded4
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,integrator.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,integrator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Integrator Boards Device Tree Bindings
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |+
+  These were the first ARM platforms officially supported by ARM Ltd.
+  They are ARMv4, ARMv5 and ARMv6-capable using different core tiles,
+  so the system is modular and can host a variety of CPU tiles called
+  "core tiles" and referred to in the device tree as "core modules".
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: ARM Integrator Application Platform, this board has a PCI
+          host and several PCI slots, as well as a number of slots for logical
+          expansion modules, it is referred to as an "ASIC Development
+          Motherboard" and is extended with custom FPGA and is intended for
+          rapid prototyping. See ARM DUI 0098B. This board can physically come
+          pre-packaged in a PC Tower form factor called Integrator/PP1 or a
+          special metal fixture called Integrator/PP2, see ARM DUI 0169A.
+        items:
+          - const: arm,integrator-ap
+      - description: ARM Integrator Compact Platform (HBI-0086), this board has
+          a compact form factor and mainly consists of the bare minimum
+          peripherals to make use of the core module. See ARM DUI 0159B.
+        items:
+          - const: arm,integrator-cp
+      - description: ARM Integrator Standard Development Board (SDB) Platform,
+          this board is a PCI-based board conforming to the Microsoft SDB
+          (HARP) specification. See ARM DUI 0099A.
+        items:
+          - const: arm,integrator-sp
+
+  core-module@10000000:
+    type: object
+    description: the root node in the Integrator platforms must contain
+      a core module child node. They are always at physical address
+      0x10000000 in all the Integrator variants.
+    properties:
+      compatible:
+        items:
+          - const: arm,core-module-integrator
+          - const: syscon
+          - const: simple-mfd
+      reg:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+
+patternProperties:
+  "^syscon@[0-9a-f]+$":
+    description: All Integrator boards must provide a system controller as a
+      node in the root of the device tree.
+    type: object
+    properties:
+      compatible:
+        items:
+          - enum:
+            - arm,integrator-ap-syscon
+            - arm,integrator-cp-syscon
+            - arm,integrator-sp-syscon
+          - const: syscon
+      reg:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+
+
+required:
+  - compatible
+  - core-module@10000000
+
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,realview.yaml b/Documentation/devicetree/bindings/arm/arm,realview.yaml
new file mode 100644
index 0000000..d6e85d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,realview.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,realview.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM RealView Boards Device Tree Bindings
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |+
+  The ARM RealView series of reference designs were built to explore the ARM
+  11, Cortex A-8 and Cortex A-9 CPUs. This included new features compared to
+  the earlier CPUs such as TrustZone and multicore (MPCore).
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: ARM RealView Emulation Baseboard (HBI-0140) was created
+          as a generic platform to test different FPGA designs, and has
+          pluggable CPU modules, see ARM DUI 0303E.
+        items:
+          - const: arm,realview-eb
+      - description: ARM RealView Platform Baseboard for ARM1176JZF-S
+          (HBI-0147) was created as a development board to test ARM TrustZone,
+          CoreSight and Intelligent Energy Management (IEM) see ARM DUI 0425F.
+        items:
+          - const: arm,realview-pb1176
+      - description: ARM RealView Platform Baseboard for ARM 11 MPCore
+          (HBI-0159, HBI-0175 and HBI-0176) was created to showcase
+          multiprocessing with ARM11 using MPCore using symmetric
+          multiprocessing (SMP). See ARM DUI 0351E.
+        items:
+          - const: arm,realview-pb11mp
+      - description: ARM RealView Platform Baseboard for Cortex-A8 (HBI-0178,
+          HBI-0176 and HBI-0175) was the first reference platform for the
+          Cortex CPU family, including a Cortex-A8 test chip.
+        items:
+          - const: arm,realview-pba8
+      - description: ARM RealView Platform Baseboard Explore for Cortex-A9
+          (HBI-0182 and HBI-0183) was the reference platform for the Cortex-A9
+          CPU.
+        items:
+          - const: arm,realview-pbx
+
+  soc:
+    description: All RealView boards must provide a soc node in the root of the
+      device tree, representing the System-on-Chip since these test chips are
+      rather complex.
+    type: object
+    properties:
+      compatible:
+        oneOf:
+          - items:
+            - const: arm,realview-eb-soc
+            - const: simple-bus
+          - items:
+            - const: arm,realview-pb1176-soc
+            - const: simple-bus
+          - items:
+            - const: arm,realview-pb11mp-soc
+            - const: simple-bus
+          - items:
+            - const: arm,realview-pba8-soc
+            - const: simple-bus
+          - items:
+            - const: arm,realview-pbx-soc
+            - const: simple-bus
+
+    patternProperties:
+      "^.*syscon@[0-9a-f]+$":
+        type: object
+        description: All RealView boards must provide a syscon system controller
+          node inside the soc node.
+        properties:
+          compatible:
+            oneOf:
+              - items:
+                - const: arm,realview-eb11mp-revb-syscon
+                - const: arm,realview-eb-syscon
+                - const: syscon
+                - const: simple-mfd
+              - items:
+                - const: arm,realview-eb11mp-revc-syscon
+                - const: arm,realview-eb-syscon
+                - const: syscon
+                - const: simple-mfd
+              - items:
+                - const: arm,realview-eb-syscon
+                - const: syscon
+                - const: simple-mfd
+              - items:
+                - const: arm,realview-pb1176-syscon
+                - const: syscon
+                - const: simple-mfd
+              - items:
+                - const: arm,realview-pb11mp-syscon
+                - const: syscon
+                - const: simple-mfd
+              - items:
+                - const: arm,realview-pba8-syscon
+                - const: syscon
+                - const: simple-mfd
+              - items:
+                - const: arm,realview-pbx-syscon
+                - const: syscon
+                - const: simple-mfd
+
+        required:
+          - compatible
+          - reg
+
+    required:
+      - compatible
+
+required:
+  - compatible
+  - soc
+
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,versatile.yaml b/Documentation/devicetree/bindings/arm/arm,versatile.yaml
new file mode 100644
index 0000000..06efd2a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,versatile.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,versatile.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Versatile Boards Device Tree Bindings
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |+
+  The ARM Versatile boards are two variants of ARM926EJ-S evaluation boards
+  with various pluggable interface boards, in essence the Versatile PB version
+  is a superset of the Versatile AB version.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: The ARM Versatile Application Baseboard (HBI-0118) is an
+          evaluation board specifically for the ARM926EJ-S. It can be connected
+          to an IB1 interface board for a touchscreen-type use case or an IB2
+          for a candybar phone-type use case. See ARM DUI 0225D.
+        items:
+          - const: arm,versatile-ab
+      - description: The ARM Versatile Platform Baseboard (HBI-0117) is an
+          extension of the Versatile Application Baseboard that includes a
+          PCI host controller. Like the sibling board, it is done specifically
+          for ARM926EJ-S. See ARM DUI 0224B.
+        items:
+          - const: arm,versatile-pb
+
+  core-module@10000000:
+    type: object
+    description: the root node in the Versatile platforms must contain
+      a core module child node. They are always at physical address
+      0x10000000 in all the Versatile variants.
+    properties:
+      compatible:
+        items:
+          - const: arm,core-module-versatile
+          - const: syscon
+          - const: simple-mfd
+      reg:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+
+patternProperties:
+  "^syscon@[0-9a-f]+$":
+    type: object
+    description: When fitted with the IB2 Interface Board, the Versatile
+      AB will present an optional system controller node which controls the
+      extra peripherals on the interface board.
+    properties:
+      compatible:
+        contains:
+          const: arm,versatile-ib2-syscon
+    required:
+      - compatible
+      - reg
+
+required:
+  - compatible
+  - core-module@10000000
+
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
new file mode 100644
index 0000000..8c06a73
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
@@ -0,0 +1,223 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,vexpress-juno.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Versatile Express and Juno Boards Device Tree Bindings
+
+maintainers:
+  - Sudeep Holla <sudeep.holla@arm.com>
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |+
+  ARM's Versatile Express platform were built as reference designs for exploring
+  multicore Cortex-A class systems. The Versatile Express family contains both
+  32 bit (Aarch32) and 64 bit (Aarch64) systems.
+
+  The board consist of a motherboard and one or more daughterboards (tiles). The
+  motherboard provides a set of peripherals. Processor and RAM "live" on the
+  tiles.
+
+  The motherboard and each core tile should be described by a separate Device
+  Tree source file, with the tile's description including the motherboard file
+  using an include directive. As the motherboard can be initialized in one of
+  two different configurations ("memory maps"), care must be taken to include
+  the correct one.
+
+  When a new generation of boards were introduced under the name "Juno", these
+  shared to many common characteristics with the Versatile Express that the
+  "arm,vexpress" compatible was retained in the root node, and these are
+  included in this binding schema as well.
+
+  The root node indicates the CPU SoC on the core tile, and this
+  is a daughterboard to the main motherboard. The name used in the compatible
+  string shall match the name given in the core tile's technical reference
+  manual, followed by "arm,vexpress" as an additional compatible value. If
+  further subvariants are released of the core tile, even more fine-granular
+  compatible strings with up to three compatible strings are used.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: CoreTile Express A9x4 (V2P-CA9) has 4 Cortex A9 CPU cores
+          in MPCore configuration in a test chip on the core tile. See ARM
+          DUI 0448I. This was the first Versatile Express platform.
+        items:
+          - const: arm,vexpress,v2p-ca9
+          - const: arm,vexpress
+      - description: CoreTile Express A5x2 (V2P-CA5s) has 2 Cortex A5 CPU cores
+          in a test chip on the core tile. It is intended to evaluate NEON, FPU
+          and Jazelle support in the Cortex A5 family. See ARM DUI 0541C.
+        items:
+          - const: arm,vexpress,v2p-ca5s
+          - const: arm,vexpress
+      - description: Coretile Express A15x2 (V2P-CA15) has 2 Cortex A15 CPU
+          cores in a MPCore configuration in a test chip on the core tile. See
+          ARM DUI 0604F.
+        items:
+          - const: arm,vexpress,v2p-ca15
+          - const: arm,vexpress
+      - description: CoreTile Express A15x4 (V2P-CA15, HBI-0237A) has 4 Cortex
+          A15 CPU cores in a test chip on the core tile. This is the first test
+          chip called "TC1".
+        items:
+          - const: arm,vexpress,v2p-ca15,tc1
+          - const: arm,vexpress,v2p-ca15
+          - const: arm,vexpress
+      - description: Coretile Express A15x2 A7x3 (V2P-CA15_A7) has 2 Cortex A15
+          CPU cores and 3 Cortex A7 cores in a big.LITTLE MPCore configuration
+          in a test chip on the core tile. See ARM DDI 0503I.
+        items:
+          - const: arm,vexpress,v2p-ca15_a7
+          - const: arm,vexpress
+      - description: LogicTile Express 20MG (V2F-1XV7) has 2 Cortex A53 CPU
+          cores in a test chip on the core tile. See ARM DDI 0498D.
+        items:
+          - const: arm,vexpress,v2f-1xv7,ca53x2
+          - const: arm,vexpress,v2f-1xv7
+          - const: arm,vexpress
+      - description: Arm Versatile Express Juno "r0" (the first Juno board,
+          V2M-Juno) was introduced as a vehicle for evaluating big.LITTLE on
+          AArch64 CPU cores. It has 2 Cortex A57 CPU cores and 4 Cortex A53
+          cores in a big.LITTLE configuration. It also features the MALI T624
+          GPU. See ARM document 100113_0000_07_en.
+        items:
+          - const: arm,juno
+          - const: arm,vexpress
+      - description: Arm Versatile Express Juno r1 Development Platform
+          (V2M-Juno r1) was introduced mainly aimed at development of PCIe
+          based systems. Juno r1 also has support for AXI masters placed on
+          the TLX connectors to join the coherency domain. Otherwise it is the
+          same configuration as Juno r0. See ARM document 100122_0100_06_en.
+        items:
+          - const: arm,juno-r1
+          - const: arm,juno
+          - const: arm,vexpress
+      - description: Arm Versatile Express Juno r2 Development Platform
+          (V2M-Juno r2). It has the same feature set as Juno r0 and r1. See
+          ARM document 100114_0200_04_en.
+        items:
+          - const: arm,juno-r2
+          - const: arm,juno
+          - const: arm,vexpress
+      - description: Arm AEMv8a Versatile Express Real-Time System Model
+          (VE RTSM) is a programmers view of the Versatile Express with Arm
+          v8A hardware. See ARM DUI 0575D.
+        items:
+          - const: arm,rtsm_ve,aemv8a
+          - const: arm,vexpress
+      - description: Arm FVP (Fixed Virtual Platform) base model revision C
+          See ARM Document 100964_1190_00_en.
+        items:
+          - const: arm,fvp-base-revc
+          - const: arm,vexpress
+      - description: Arm Foundation model for Aarch64
+        items:
+          - const: arm,foundation-aarch64
+          - const: arm,vexpress
+
+  arm,hbi:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: This indicates the ARM HBI (Hardware Board ID), this is
+      ARM's unique board model ID, visible on the PCB's silkscreen.
+
+  arm,vexpress,site:
+    description: As Versatile Express can be configured in number of physically
+      different setups, the device tree should describe platform topology.
+      For this reason the root node and main motherboard node must define this
+      property, describing the physical location of the children nodes.
+      0 means motherboard site, while 1 and 2 are daughterboard sites, and
+      0xf means "sisterboard" which is the site containing the main CPU tile.
+    allOf:
+      - $ref: '/schemas/types.yaml#/definitions/uint32'
+      - minimum: 0
+        maximum: 15
+
+  arm,vexpress,position:
+    description: When daughterboards are stacked on one site, their position
+      in the stack be be described this attribute.
+    allOf:
+      - $ref: '/schemas/types.yaml#/definitions/uint32'
+      - minimum: 0
+        maximum: 3
+
+  arm,vexpress,dcc:
+    description: When describing tiles consisting of more than one DCC, its
+      number can be specified with this attribute.
+    allOf:
+      - $ref: '/schemas/types.yaml#/definitions/uint32'
+      - minimum: 0
+        maximum: 3
+
+patternProperties:
+  "^bus@[0-9a-f]+$":
+    description: Static Memory Bus (SMB) node, if this exists it describes
+      the connection between the motherboard and any tiles. Sometimes the
+      compatible is placed directly under this node, sometimes it is placed
+      in a subnode named "motherboard". Sometimes the compatible includes
+      "arm,vexpress,v2?-p1" sometimes (on software models) is is just
+      "simple-bus". If the compatible is placed in the "motherboard" node,
+      it is stricter and always has two compatibles.
+    type: object
+    allOf:
+      - $ref: '/schemas/simple-bus.yaml'
+
+    properties:
+      compatible:
+        oneOf:
+          - items:
+            - enum:
+              - arm,vexpress,v2m-p1
+              - arm,vexpress,v2p-p1
+            - const: simple-bus
+          - const: simple-bus
+      motherboard:
+        type: object
+        description: The motherboard description provides a single "motherboard"
+          node using 2 address cells corresponding to the Static Memory Bus
+          used between the motherboard and the tile. The first cell defines the
+          Chip Select (CS) line number, the second cell address offset within
+          the CS. All interrupt lines between the motherboard and the tile
+          are active high and are described using single cell.
+        properties:
+          "#address-cells":
+            const: 2
+          "#size-cells":
+            const: 1
+          compatible:
+            items:
+              - enum:
+                - arm,vexpress,v2m-p1
+                - arm,vexpress,v2p-p1
+              - const: simple-bus
+          arm,v2m-memory-map:
+            description: This describes the memory map type.
+            allOf:
+              - $ref: '/schemas/types.yaml#/definitions/string'
+              - enum:
+                - rs1
+                - rs2
+        required:
+          - compatible
+    required:
+      - compatible
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - arm,vexpress,v2p-ca9
+              - arm,vexpress,v2p-ca5s
+              - arm,vexpress,v2p-ca15
+              - arm,vexpress,v2p-ca15_a7
+              - arm,vexpress,v2f-1xv7,ca53x2
+    then:
+      required:
+        - arm,hbi
+
+...
diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards
deleted file mode 100644
index 96b1dad..0000000
--- a/Documentation/devicetree/bindings/arm/arm-boards
+++ /dev/null
@@ -1,237 +0,0 @@
-ARM Integrator/AP (Application Platform) and Integrator/CP (Compact Platform)
------------------------------------------------------------------------------
-ARM's oldest Linux-supported platform with connectors for different core
-tiles of ARMv4, ARMv5 and ARMv6 type.
-
-Required properties (in root node):
-	compatible = "arm,integrator-ap";  /* Application Platform */
-	compatible = "arm,integrator-cp";  /* Compact Platform */
-
-FPGA type interrupt controllers, see the versatile-fpga-irq binding doc.
-
-Required nodes:
-
-- core-module: the root node to the Integrator platforms must have
-  a core-module with regs and the compatible string
-  "arm,core-module-integrator"
-- external-bus-interface: the root node to the Integrator platforms
-  must have an external bus interface with regs and the
-  compatible-string "arm,external-bus-interface"
-
-  Required properties for the core module:
-  - regs: the location and size of the core module registers, one
-    range of 0x200 bytes.
-
-- syscon: the root node of the Integrator platforms must have a
-  system controller node pointing to the control registers,
-  with the compatible string
-  "arm,integrator-ap-syscon"
-  "arm,integrator-cp-syscon"
-  respectively.
-
-  Required properties for the system controller:
-  - regs: the location and size of the system controller registers,
-    one range of 0x100 bytes.
-
-  Required properties for the AP system controller:
-  - interrupts: the AP syscon node must include the logical module
-    interrupts, stated in order of module instance <module 0>,
-    <module 1>, <module 2> ... for the CP system controller this
-    is not required not of any use.
-
-/dts-v1/;
-/include/ "integrator.dtsi"
-
-/ {
-	model = "ARM Integrator/AP";
-	compatible = "arm,integrator-ap";
-
-	core-module@10000000 {
-		compatible = "arm,core-module-integrator";
-		reg = <0x10000000 0x200>;
-	};
-
-	ebi@12000000 {
-		compatible = "arm,external-bus-interface";
-		reg = <0x12000000 0x100>;
-	};
-
-	syscon {
-		compatible = "arm,integrator-ap-syscon";
-		reg = <0x11000000 0x100>;
-		interrupt-parent = <&pic>;
-		/* These are the logic module IRQs */
-		interrupts = <9>, <10>, <11>, <12>;
-	};
-};
-
-
-ARM Versatile Application and Platform Baseboards
--------------------------------------------------
-ARM's development hardware platform with connectors for customizable
-core tiles.  The hardware configuration of the Versatile boards is
-highly customizable.
-
-Required properties (in root node):
-	compatible = "arm,versatile-ab";  /* Application baseboard */
-	compatible = "arm,versatile-pb";  /* Platform baseboard */
-
-Interrupt controllers:
-- VIC required properties:
-	compatible = "arm,versatile-vic";
-	interrupt-controller;
-	#interrupt-cells = <1>;
-
-- SIC required properties:
-	compatible = "arm,versatile-sic";
-	interrupt-controller;
-	#interrupt-cells = <1>;
-
-Required nodes:
-
-- core-module: the root node to the Versatile platforms must have
-  a core-module with regs and the compatible strings
-  "arm,core-module-versatile", "syscon"
-
-Optional nodes:
-
-- arm,versatile-ib2-syscon : if the Versatile has an IB2 interface
-  board mounted, this has a separate system controller that is
-  defined in this node.
-  Required properties:
-  compatible = "arm,versatile-ib2-syscon", "syscon"
-
-ARM RealView Boards
--------------------
-The RealView boards cover tailored evaluation boards that are used to explore
-the ARM11 and Cortex A-8 and Cortex A-9 processors.
-
-Required properties (in root node):
-	/* RealView Emulation Baseboard */
-	compatible = "arm,realview-eb";
-	 /* RealView Platform Baseboard for ARM1176JZF-S */
-	compatible = "arm,realview-pb1176";
-	/* RealView Platform Baseboard for ARM11 MPCore */
-	compatible = "arm,realview-pb11mp";
-	/* RealView Platform Baseboard for Cortex A-8 */
-	compatible = "arm,realview-pba8";
-	/* RealView Platform Baseboard Explore for Cortex A-9 */
-	compatible = "arm,realview-pbx";
-
-Required nodes:
-
-- soc: some node of the RealView platforms must be the SoC
-  node that contain the SoC-specific devices, with the compatible
-  string set to one of these tuples:
-   "arm,realview-eb-soc", "simple-bus"
-   "arm,realview-pb1176-soc", "simple-bus"
-   "arm,realview-pb11mp-soc", "simple-bus"
-   "arm,realview-pba8-soc", "simple-bus"
-   "arm,realview-pbx-soc", "simple-bus"
-
-- syscon: some subnode of the RealView SoC node must be a
-  system controller node pointing to the control registers,
-  with the compatible string set to one of these:
-   "arm,realview-eb11mp-revb-syscon", "arm,realview-eb-syscon", "syscon"
-   "arm,realview-eb11mp-revc-syscon", "arm,realview-eb-syscon", "syscon"
-   "arm,realview-eb-syscon", "syscon"
-   "arm,realview-pb1176-syscon", "syscon"
-   "arm,realview-pb11mp-syscon", "syscon"
-   "arm,realview-pba8-syscon", "syscon"
-   "arm,realview-pbx-syscon", "syscon"
-
-  Required properties for the system controller:
-  - regs: the location and size of the system controller registers,
-    one range of 0x1000 bytes.
-
-Example:
-
-/dts-v1/;
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "ARM RealView PB1176 with device tree";
-	compatible = "arm,realview-pb1176";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "arm,realview-pb1176-soc", "simple-bus";
-		ranges;
-
-		syscon: syscon@10000000 {
-			compatible = "arm,realview-syscon", "syscon";
-			reg = <0x10000000 0x1000>;
-		};
-
-	};
-};
-
-ARM Versatile Express Boards
------------------------------
-For details on the device tree bindings for ARM Versatile Express boards
-please consult the vexpress.txt file in the same directory as this file.
-
-ARM Juno Boards
-----------------
-The Juno boards are targeting development for AArch64 systems. The first
-iteration, Juno r0, is a vehicle for evaluating big.LITTLE on AArch64,
-with the second iteration, Juno r1, mainly aimed at development of PCIe
-based systems. Juno r1 also has support for AXI masters placed on the TLX
-connectors to join the coherency domain.
-
-Juno boards are described in a similar way to ARM Versatile Express boards,
-with the motherboard part of the hardware being described in a separate file
-to highlight the fact that is part of the support infrastructure for the SoC.
-Juno device tree bindings also share the Versatile Express bindings as
-described under the RS1 memory mapping.
-
-Required properties (in root node):
-	compatible = "arm,juno";	/* For Juno r0 board */
-	compatible = "arm,juno-r1";	/* For Juno r1 board */
-	compatible = "arm,juno-r2";	/* For Juno r2 board */
-
-Required nodes:
-The description for the board must include:
-   - a "psci" node describing the boot method used for the secondary CPUs.
-     A detailed description of the bindings used for "psci" nodes is present
-     in the psci.yaml file.
-   - a "cpus" node describing the available cores and their associated
-     "enable-method"s. For more details see cpus.yaml file.
-
-Example:
-
-/dts-v1/;
-/ {
-	model = "ARM Juno development board (r0)";
-	compatible = "arm,juno", "arm,vexpress";
-	interrupt-parent = <&gic>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	cpus {
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		A57_0: cpu@0 {
-			compatible = "arm,cortex-a57";
-			reg = <0x0 0x0>;
-			device_type = "cpu";
-			enable-method = "psci";
-		};
-
-		.....
-
-		A53_0: cpu@100 {
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x100>;
-			device_type = "cpu";
-			enable-method = "psci";
-		};
-
-		.....
-	};
-
-};
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method.txt
deleted file mode 100644
index e3f9969..0000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Broadcom Kona Family CPU Enable Method
---------------------------------------
-This binding defines the enable method used for starting secondary
-CPUs in the following Broadcom SoCs:
-  BCM11130, BCM11140, BCM11351, BCM28145, BCM28155, BCM21664
-
-The enable method is specified by defining the following required
-properties in the "cpu" device tree node:
-  - enable-method = "brcm,bcm11351-cpu-method";
-  - secondary-boot-reg = <...>;
-
-The secondary-boot-reg property is a u32 value that specifies the
-physical address of the register used to request the ROM holding pen
-code release a secondary CPU.  The value written to the register is
-formed by encoding the target CPU id into the low bits of the
-physical start address it should jump to.
-
-Example:
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-			enable-method = "brcm,bcm11351-cpu-method";
-			secondary-boot-reg = <0x3500417c>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.txt
deleted file mode 100644
index 0ff6560..0000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-Broadcom BCM11351 device tree bindings
--------------------------------------------
-
-Boards with the bcm281xx SoC family (which includes bcm11130, bcm11140,
-bcm11351, bcm28145, bcm28155 SoCs) shall have the following properties:
-
-Required root node property:
-
-compatible = "brcm,bcm11351";
-DEPRECATED: compatible = "bcm,bcm11351";
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml
new file mode 100644
index 0000000..b5ef266
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml
@@ -0,0 +1,21 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm11351.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM11351 device tree bindings
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+        - brcm,bcm28155-ap
+      - const: brcm,bcm11351
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.txt
deleted file mode 100644
index e077425..0000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-Broadcom BCM21664 device tree bindings
---------------------------------------
-
-This document describes the device tree bindings for boards with the BCM21664
-SoC.
-
-Required root node property:
-  - compatible: brcm,bcm21664
-
-Example:
-	/ {
-		model = "BCM21664 SoC";
-		compatible = "brcm,bcm21664";
-		[...]
-	}
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml
new file mode 100644
index 0000000..aafbd6a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml
@@ -0,0 +1,21 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm21664.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM21664 device tree bindings
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+        - brcm,bcm21664-garnet
+      - const: brcm,bcm21664
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550-cpu-method.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550-cpu-method.txt
deleted file mode 100644
index a3af54c..0000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550-cpu-method.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Broadcom Kona Family CPU Enable Method
---------------------------------------
-This binding defines the enable method used for starting secondary
-CPUs in the following Broadcom SoCs:
-  BCM23550
-
-The enable method is specified by defining the following required
-properties in the "cpu" device tree node:
-  - enable-method = "brcm,bcm23550";
-  - secondary-boot-reg = <...>;
-
-The secondary-boot-reg property is a u32 value that specifies the
-physical address of the register used to request the ROM holding pen
-code release a secondary CPU.  The value written to the register is
-formed by encoding the target CPU id into the low bits of the
-physical start address it should jump to.
-
-Example:
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-			enable-method = "brcm,bcm23550";
-			secondary-boot-reg = <0x3500417c>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.txt
deleted file mode 100644
index 080baad..0000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-Broadcom BCM23550 device tree bindings
---------------------------------------
-
-This document describes the device tree bindings for boards with the BCM23550
-SoC.
-
-Required root node property:
-  - compatible: brcm,bcm23550
-
-Example:
-	/ {
-		model = "BCM23550 SoC";
-		compatible = "brcm,bcm23550";
-		[...]
-	}
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml
new file mode 100644
index 0000000..c4b4efd
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml
@@ -0,0 +1,21 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm23550.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM23550 device tree bindings
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+        - brcm,bcm23550-sparrow
+      - const: brcm,bcm23550
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.txt
deleted file mode 100644
index 8608a77..0000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-Broadcom BCM4708 device tree bindings
--------------------------------------------
-
-Boards with the BCM4708 SoC shall have the following properties:
-
-Required root node property:
-
-bcm4708
-compatible = "brcm,bcm4708";
-
-bcm4709
-compatible = "brcm,bcm4709";
-
-bcm53012
-compatible = "brcm,bcm53012";
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml
new file mode 100644
index 0000000..d48313c
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm4708.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM4708 device tree bindings
+
+description:
+  Broadcom BCM4708/47081/4709/47094/53012 Wi-Fi/network SoCs based
+  on the iProc architecture (Northstar).
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+  - Hauke Mehrtens <hauke@hauke-m.de>
+  - Rafal Milecki <zajec5@gmail.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: BCM4708 based boards
+        items:
+          - enum:
+              - asus,rt-ac56u
+              - asus,rt-ac68u
+              - buffalo,wzr-1750dhp
+              - linksys,ea6300-v1
+              - linksys,ea6500-v2
+              - luxul,xap-1510v1
+              - luxul,xwc-1000
+              - netgear,r6250v1
+              - netgear,r6300v2
+              - smartrg,sr400ac
+              - brcm,bcm94708
+          - const: brcm,bcm4708
+
+      - description: BCM47081 based boards
+        items:
+          - enum:
+              - asus,rt-n18u
+              - buffalo,wzr-600dhp2
+              - buffalo,wzr-900dhp
+              - luxul,xap-1410v1
+              - luxul,xwr-1200v1
+              - tplink,archer-c5-v2
+          - const: brcm,bcm47081
+          - const: brcm,bcm4708
+
+      - description: BCM4709 based boards
+        items:
+          - enum:
+              - asus,rt-ac87u
+              - buffalo,wxr-1900dhp
+              - linksys,ea9200
+              - netgear,r7000
+              - netgear,r8000
+              - tplink,archer-c9-v1
+              - brcm,bcm94709
+          - const: brcm,bcm4709
+          - const: brcm,bcm4708
+
+      - description: BCM47094 based boards
+        items:
+          - enum:
+              - dlink,dir-885l
+              - linksys,panamera
+              - luxul,abr-4500-v1
+              - luxul,xap-1610-v1
+              - luxul,xbr-4500-v1
+              - luxul,xwc-2000-v1
+              - luxul,xwr-3100v1
+              - luxul,xwr-3150-v1
+              - netgear,r8500
+              - phicomm,k3
+          - const: brcm,bcm47094
+          - const: brcm,bcm4708
+
+      - description: BCM53012 based boards
+        items:
+          - enum:
+              - brcm,bcm953012er
+              - brcm,bcm953012hr
+              - brcm,bcm953012k
+          - const: brcm,brcm53012
+          - const: brcm,bcm4708
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.txt
deleted file mode 100644
index 4c77169..0000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-Broadcom Cygnus device tree bindings
-------------------------------------
-
-
-Boards with Cygnus SoCs shall have the following properties:
-
-Required root node property:
-
-BCM11300
-compatible = "brcm,bcm11300", "brcm,cygnus";
-
-BCM11320
-compatible = "brcm,bcm11320", "brcm,cygnus";
-
-BCM11350
-compatible = "brcm,bcm11350", "brcm,cygnus";
-
-BCM11360
-compatible = "brcm,bcm11360", "brcm,cygnus";
-
-BCM58300
-compatible = "brcm,bcm58300", "brcm,cygnus";
-
-BCM58302
-compatible = "brcm,bcm58302", "brcm,cygnus";
-
-BCM58303
-compatible = "brcm,bcm58303", "brcm,cygnus";
-
-BCM58305
-compatible = "brcm,bcm58305", "brcm,cygnus";
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml
new file mode 100644
index 0000000..fe111e72
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,cygnus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Cygnus device tree bindings
+
+maintainers:
+   - Ray Jui <rjui@broadcom.com>
+   - Scott Branden <sbranden@broadcom.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+        - brcm,bcm11300
+        - brcm,bcm11320
+        - brcm,bcm11350
+        - brcm,bcm11360
+        - brcm,bcm58300
+        - brcm,bcm58302
+        - brcm,bcm58303
+        - brcm,bcm58305
+      - const: brcm,cygnus
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.txt
deleted file mode 100644
index a124c7f..0000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-Broadcom Hurricane 2 device tree bindings
----------------------------------------
-
-Broadcom Hurricane 2 family of SoCs are used for switching control. These SoCs
-are based on Broadcom's iProc SoC architecture and feature a single core Cortex
-A9 ARM CPUs, DDR2/DDR3 memory, PCIe GEN-2, USB 2.0 and USB 3.0, serial and NAND
-flash and a PCIe attached integrated switching engine.
-
-Boards with Hurricane SoCs shall have the following properties:
-
-Required root node property:
-
-BCM53342
-compatible = "brcm,bcm53342", "brcm,hr2";
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml
new file mode 100644
index 0000000..1158f49
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml
@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,hr2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Hurricane 2 device tree bindings
+
+description:
+  Broadcom Hurricane 2 family of SoCs are used for switching control. These SoCs
+  are based on Broadcom's iProc SoC architecture and feature a single core Cortex
+  A9 ARM CPUs, DDR2/DDR3 memory, PCIe GEN-2, USB 2.0 and USB 3.0, serial and NAND
+  flash and a PCIe attached integrated switching engine.
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+        - ubnt,unifi-switch8
+      - const: brcm,bcm53342
+      - const: brcm,hr2
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.txt
deleted file mode 100644
index 35f056f..0000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.txt
+++ /dev/null
@@ -1,9 +0,0 @@
-Broadcom North Star 2 (NS2) device tree bindings
-------------------------------------------------
-
-Boards with NS2 shall have the following properties:
-
-Required root node property:
-
-NS2 SVK board
-compatible = "brcm,ns2-svk", "brcm,ns2";
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml
new file mode 100644
index 0000000..2451704
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml
@@ -0,0 +1,23 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,ns2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom North Star 2 (NS2) device tree bindings
+
+maintainers:
+  - Ray Jui <rjui@broadcom.com>
+  - Scott Branden <sbranden@broadcom.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+        - brcm,ns2-svk
+        - brcm,ns2-xmc
+      - const: brcm,ns2
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt
deleted file mode 100644
index 677ef9d9..0000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Broadcom Northstar Plus SoC CPU Enable Method
----------------------------------------------
-This binding defines the enable method used for starting secondary
-CPU in the following Broadcom SoCs:
-  BCM58522, BCM58525, BCM58535, BCM58622, BCM58623, BCM58625, BCM88312
-
-The enable method is specified by defining the following required
-properties in the corresponding secondary "cpu" device tree node:
-  - enable-method = "brcm,bcm-nsp-smp";
-  - secondary-boot-reg = <...>;
-
-The secondary-boot-reg property is a u32 value that specifies the
-physical address of the register which should hold the common
-entry point for a secondary CPU. This entry is cpu node specific
-and should be added per cpu. E.g., in case of NSP (BCM58625) which
-is a dual core CPU SoC, this entry should be added to cpu1 node.
-
-
-Example:
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			enable-method = "brcm,bcm-nsp-smp";
-			secondary-boot-reg = <0xffff042c>;
-			reg = <1>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.txt
deleted file mode 100644
index eae53e4..0000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-Broadcom Northstar Plus device tree bindings
---------------------------------------------
-
-Broadcom Northstar Plus family of SoCs are used for switching control
-and management applications as well as residential router/gateway
-applications. The SoC features dual core Cortex A9 ARM CPUs, integrating
-several peripheral interfaces including multiple Gigabit Ethernet PHYs,
-DDR3 memory, PCIE Gen-2, USB 2.0 and USB 3.0, serial and NAND flash,
-SATA and several other IO controllers.
-
-Boards with Northstar Plus SoCs shall have the following properties:
-
-Required root node property:
-
-BCM58522
-compatible = "brcm,bcm58522", "brcm,nsp";
-
-BCM58525
-compatible = "brcm,bcm58525", "brcm,nsp";
-
-BCM58535
-compatible = "brcm,bcm58535", "brcm,nsp";
-
-BCM58622
-compatible = "brcm,bcm58622", "brcm,nsp";
-
-BCM58623
-compatible = "brcm,bcm58623", "brcm,nsp";
-
-BCM58625
-compatible = "brcm,bcm58625", "brcm,nsp";
-
-BCM88312
-compatible = "brcm,bcm88312", "brcm,nsp";
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml
new file mode 100644
index 0000000..fe364ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,nsp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Northstar Plus device tree bindings
+
+description:
+  Broadcom Northstar Plus family of SoCs are used for switching control
+  and management applications as well as residential router/gateway
+  applications. The SoC features dual core Cortex A9 ARM CPUs, integrating
+  several peripheral interfaces including multiple Gigabit Ethernet PHYs,
+  DDR3 memory, PCIE Gen-2, USB 2.0 and USB 3.0, serial and NAND flash,
+  SATA and several other IO controllers.
+
+maintainers:
+  - Ray Jui <rjui@broadcom.com>
+  - Scott Branden <sbranden@broadcom.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+        - brcm,bcm58522
+        - brcm,bcm58525
+        - brcm,bcm58535
+        - brcm,bcm58622
+        - brcm,bcm58623
+        - brcm,bcm58625
+        - brcm,bcm88312
+      - const: brcm,nsp
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.txt
deleted file mode 100644
index 23a0217..0000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-Broadcom Stingray device tree bindings
-------------------------------------------------
-
-Boards with Stingray shall have the following properties:
-
-Required root node property:
-
-Stingray Combo SVK board
-compatible = "brcm,bcm958742k", "brcm,stingray";
-
-Stingray SST100 board
-compatible = "brcm,bcm958742t", "brcm,stingray";
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml
new file mode 100644
index 0000000..4ad2b21
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml
@@ -0,0 +1,24 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,stingray.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Stingray device tree bindings
+
+maintainers:
+  - Ray Jui <rjui@broadcom.com>
+  - Scott Branden <sbranden@broadcom.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+        - brcm,bcm958742k
+        - brcm,bcm958742t
+        - brcm,bcm958802a802x
+      - const: brcm,stingray
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.txt
deleted file mode 100644
index 223ed34..0000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-Broadcom Vulcan device tree bindings
-------------------------------------
-
-Boards with Broadcom Vulcan shall have the following root property:
-
-Broadcom Vulcan Evaluation Board:
-  compatible = "brcm,vulcan-eval", "brcm,vulcan-soc";
-
-Generic Vulcan board:
-  compatible = "brcm,vulcan-soc";
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml
new file mode 100644
index 0000000..c5b6f31
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml
@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,vulcan-soc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Vulcan device tree bindings
+
+maintainers:
+  - Robert Richter <rrichter@marvell.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+        - brcm,vulcan-eval
+        - cavium,thunderx2-cn9900
+      - const: brcm,vulcan-soc
+
+...
diff --git a/Documentation/devicetree/bindings/arm/coresight-cti.yaml b/Documentation/devicetree/bindings/arm/coresight-cti.yaml
new file mode 100644
index 0000000..3db3642
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/coresight-cti.yaml
@@ -0,0 +1,336 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+# Copyright 2019 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/coresight-cti.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Coresight Cross Trigger Interface (CTI) device.
+
+description: |
+  The CoreSight Embedded Cross Trigger (ECT) consists of CTI devices connected
+  to one or more CoreSight components and/or a CPU, with CTIs interconnected in
+  a star topology via the Cross Trigger Matrix (CTM), which is not programmable.
+  The ECT components are not part of the trace generation data path and are thus
+  not part of the CoreSight graph described in the general CoreSight bindings
+  file coresight.txt.
+
+  The CTI component properties define the connections between the individual
+  CTI and the components it is directly connected to, consisting of input and
+  output hardware trigger signals. CTIs can have a maximum number of input and
+  output hardware trigger signals (8 each for v1 CTI, 32 each for v2 CTI). The
+  number is defined at design time, the maximum of each defined in the DEVID
+  register.
+
+  CTIs are interconnected in a star topology via the CTM, using a number of
+  programmable channels, usually 4, but again implementation defined and
+  described in the DEVID register. The star topology is not required to be
+  described in the bindings as the actual connections are software
+  programmable.
+
+  In general the connections between CTI and components via the trigger signals
+  are implementation defined, except when the CTI is connected to an ARM v8
+  architecture core and optional ETM.
+
+  In this case the ARM v8 architecture defines the required signal connections
+  between CTI and the CPU core and ETM if present. In the case of a v8
+  architecturally connected CTI an additional compatible string is used to
+  indicate this feature (arm,coresight-cti-v8-arch).
+
+  When CTI trigger connection information is unavailable then a minimal driver
+  binding can be declared with no explicit trigger signals. This will result
+  the driver detecting the maximum available triggers and channels from the
+  DEVID register and make them all available for use as a single default
+  connection. Any user / client application will require additional information
+  on the connections between the CTI and other components for correct operation.
+  This information might be found by enabling the Integration Test registers in
+  the driver (set CONFIG_CORESIGHT_CTI_INTEGRATION_TEST in Kernel
+  configuration). These registers may be used to explore the trigger connections
+  between CTI and other CoreSight components.
+
+  Certain triggers between CoreSight devices and the CTI have specific types
+  and usages. These can be defined along with the signal indexes with the
+  constants defined in <dt-bindings/arm/coresight-cti-dt.h>
+
+  For example a CTI connected to a core will usually have a DBGREQ signal. This
+  is defined in the binding as type PE_EDBGREQ. These types will appear in an
+  optional array alongside the signal indexes. Omitting types will default all
+  signals to GEN_IO.
+
+  Note that some hardware trigger signals can be connected to non-CoreSight
+  components (e.g. UART etc) depending on hardware implementation.
+
+maintainers:
+  - Mike Leach <mike.leach@linaro.org>
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - arm,coresight-cti
+  required:
+    - compatible
+
+properties:
+  $nodename:
+    pattern: "^cti(@[0-9a-f]+)$"
+  compatible:
+    oneOf:
+      - items:
+        - const: arm,coresight-cti
+        - const: arm,primecell
+      - items:
+        - const: arm,coresight-cti-v8-arch
+        - const: arm,coresight-cti
+        - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  cpu:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Handle to cpu this device is associated with. This must appear in the
+      base cti node if compatible string arm,coresight-cti-v8-arch is used,
+      or may appear in a trig-conns child node when appropriate.
+
+  arm,cti-ctm-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Defines the CTM this CTI is connected to, in large systems with multiple
+      separate CTI/CTM nets. Typically multi-socket systems where the CTM is
+      propagated between sockets.
+
+  arm,cs-dev-assoc:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      defines a phandle reference to an associated CoreSight trace device.
+      When the associated trace device is enabled, then the respective CTI
+      will be enabled. Use in a trig-conns node, or in CTI base node when
+      compatible string arm,coresight-cti-v8-arch used. If the associated
+      device has not been registered then the node name will be stored as
+      the connection name for later resolution. If the associated device is
+      not a CoreSight device or not registered then the node name will remain
+      the connection name and automatic enabling will not occur.
+
+  # size cells and address cells required if trig-conns node present.
+  "#size-cells":
+    const: 0
+
+  "#address-cells":
+    const: 1
+
+patternProperties:
+  '^trig-conns@([0-9]+)$':
+    type: object
+    description:
+      A trigger connections child node which describes the trigger signals
+      between this CTI and another hardware device. This device may be a CPU,
+      CoreSight device, any other hardware device or simple external IO lines.
+      The connection may have both input and output triggers, or only one or the
+      other.
+
+    properties:
+      reg:
+        maxItems: 1
+
+      arm,trig-in-sigs:
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 32
+        description:
+          List of CTI trigger in signal numbers in use by a trig-conns node.
+
+      arm,trig-in-types:
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 32
+        description:
+          List of constants representing the types for the CTI trigger in
+          signals. Types in this array match to the corresponding signal in the
+          arm,trig-in-sigs array. If the -types array is smaller, or omitted
+          completely, then the types will default to GEN_IO.
+
+      arm,trig-out-sigs:
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 32
+        description:
+          List of CTI trigger out signal numbers in use by a trig-conns node.
+
+      arm,trig-out-types:
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 32
+        description:
+          List of constants representing the types for the CTI trigger out
+          signals. Types in this array match to the corresponding signal
+          in the arm,trig-out-sigs array. If the "-types" array is smaller,
+          or omitted completely, then the types will default to GEN_IO.
+
+      arm,trig-filters:
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 32
+        description:
+          List of CTI trigger out signals that will be blocked from becoming
+          active, unless filtering is disabled on the driver.
+
+      arm,trig-conn-name:
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/string
+        description:
+          Defines a connection name that will be displayed, if the cpu or
+          arm,cs-dev-assoc properties are not being used in this connection.
+          Principle use for CTI that are connected to non-CoreSight devices, or
+          external IO.
+
+    anyOf:
+      - required:
+        - arm,trig-in-sigs
+      - required:
+        - arm,trig-out-sigs
+    oneOf:
+      - required:
+        - arm,trig-conn-name
+      - required:
+        - cpu
+      - required:
+        - arm,cs-dev-assoc
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: arm,coresight-cti-v8-arch
+
+then:
+  required:
+    - cpu
+
+examples:
+  # minimum CTI definition. DEVID register used to set number of triggers.
+  - |
+    cti@20020000 {
+      compatible = "arm,coresight-cti", "arm,primecell";
+      reg = <0x20020000 0x1000>;
+
+      clocks = <&soc_smc50mhz>;
+      clock-names = "apb_pclk";
+    };
+  #  v8 architecturally defined CTI - CPU + ETM connections generated by the
+  #  driver according to the v8 architecture specification.
+  - |
+    cti@859000 {
+      compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+                   "arm,primecell";
+      reg = <0x859000 0x1000>;
+
+      clocks = <&soc_smc50mhz>;
+      clock-names = "apb_pclk";
+
+      cpu = <&CPU1>;
+      arm,cs-dev-assoc = <&etm1>;
+    };
+  # Implementation defined CTI - CPU + ETM connections explicitly defined..
+  # Shows use of type constants from dt-bindings/arm/coresight-cti-dt.h
+  # #size-cells and #address-cells are required if trig-conns@ nodes present.
+  - |
+    #include <dt-bindings/arm/coresight-cti-dt.h>
+
+    cti@858000 {
+      compatible = "arm,coresight-cti", "arm,primecell";
+      reg = <0x858000 0x1000>;
+
+      clocks = <&soc_smc50mhz>;
+      clock-names = "apb_pclk";
+
+      arm,cti-ctm-id = <1>;
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      trig-conns@0 {
+            reg = <0>;
+            arm,trig-in-sigs = <4 5 6 7>;
+            arm,trig-in-types = <ETM_EXTOUT
+                                 ETM_EXTOUT
+                                 ETM_EXTOUT
+                                 ETM_EXTOUT>;
+            arm,trig-out-sigs = <4 5 6 7>;
+            arm,trig-out-types = <ETM_EXTIN
+                                  ETM_EXTIN
+                                  ETM_EXTIN
+                                  ETM_EXTIN>;
+            arm,cs-dev-assoc = <&etm0>;
+      };
+
+      trig-conns@1 {
+            reg = <1>;
+            cpu = <&CPU0>;
+            arm,trig-in-sigs = <0 1>;
+            arm,trig-in-types = <PE_DBGTRIGGER
+                                 PE_PMUIRQ>;
+            arm,trig-out-sigs=<0 1 2 >;
+            arm,trig-out-types = <PE_EDBGREQ
+                                  PE_DBGRESTART
+                                  PE_CTIIRQ>;
+
+            arm,trig-filters = <0>;
+      };
+    };
+  # Implementation defined CTI - non CoreSight component connections.
+  - |
+    cti@20110000 {
+      compatible = "arm,coresight-cti", "arm,primecell";
+      reg = <0 0x20110000 0 0x1000>;
+
+      clocks = <&soc_smc50mhz>;
+      clock-names = "apb_pclk";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      trig-conns@0 {
+        reg = <0>;
+        arm,trig-in-sigs=<0>;
+        arm,trig-in-types=<GEN_INTREQ>;
+        arm,trig-out-sigs=<0>;
+        arm,trig-out-types=<GEN_HALTREQ>;
+        arm,trig-conn-name = "sys_profiler";
+      };
+
+      trig-conns@1 {
+        reg = <1>;
+        arm,trig-out-sigs=<2 3>;
+        arm,trig-out-types=<GEN_HALTREQ GEN_RESTARTREQ>;
+        arm,trig-conn-name = "watchdog";
+      };
+
+      trig-conns@2 {
+        reg = <2>;
+        arm,trig-in-sigs=<1 6>;
+        arm,trig-in-types=<GEN_HALTREQ GEN_RESTARTREQ>;
+        arm,trig-conn-name = "g_counter";
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt
index d02c42d..846f6da 100644
--- a/Documentation/devicetree/bindings/arm/coresight.txt
+++ b/Documentation/devicetree/bindings/arm/coresight.txt
@@ -45,6 +45,10 @@
 		- Coresight Address Translation Unit (CATU)
 			"arm,coresight-catu", "arm,primecell";
 
+		- Coresight Cross Trigger Interface (CTI):
+			"arm,coresight-cti", "arm,primecell";
+			See coresight-cti.yaml for full CTI definitions.
+
 	* reg: physical base address and length of the register
 	  set(s) of the component.
 
@@ -72,6 +76,9 @@
 	* reg-names: the only acceptable values are "stm-base" and
 	  "stm-stimulus-base", each corresponding to the areas defined in "reg".
 
+* Required properties for Coresight Cross Trigger Interface (CTI)
+	See coresight-cti.yaml for full CTI definitions.
+
 * Required properties for devices that don't show up on the AMBA bus, such as
   non-configurable replicators and non-configurable funnels:
 
diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
index 0d5b610..a018147 100644
--- a/Documentation/devicetree/bindings/arm/cpus.yaml
+++ b/Documentation/devicetree/bindings/arm/cpus.yaml
@@ -123,11 +123,18 @@
       - arm,cortex-a12
       - arm,cortex-a15
       - arm,cortex-a17
+      - arm,cortex-a32
+      - arm,cortex-a34
+      - arm,cortex-a35
       - arm,cortex-a53
       - arm,cortex-a55
       - arm,cortex-a57
+      - arm,cortex-a65
       - arm,cortex-a72
       - arm,cortex-a73
+      - arm,cortex-a75
+      - arm,cortex-a76
+      - arm,cortex-a77
       - arm,cortex-m0
       - arm,cortex-m0+
       - arm,cortex-m1
@@ -136,6 +143,8 @@
       - arm,cortex-r4
       - arm,cortex-r5
       - arm,cortex-r7
+      - arm,neoverse-e1
+      - arm,neoverse-n1
       - brcm,brahma-b15
       - brcm,brahma-b53
       - brcm,vulcan
@@ -155,6 +164,8 @@
       - nvidia,tegra194-carmel
       - qcom,krait
       - qcom,kryo
+      - qcom,kryo260
+      - qcom,kryo280
       - qcom,kryo385
       - qcom,kryo485
       - qcom,scorpion
@@ -201,6 +212,8 @@
               - rockchip,rk3066-smp
               - socionext,milbeaut-m10v-smp
               - ste,dbx500-smp
+              - ti,am3352
+              - ti,am4372
 
   cpu-release-addr:
     $ref: '/schemas/types.yaml#/definitions/uint64'
@@ -287,6 +300,39 @@
       While optional, it is the preferred way to get access to
       the cpu-core power-domains.
 
+  secondary-boot-reg:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: |
+      Required for systems that have an "enable-method" property value of
+      "brcm,bcm11351-cpu-method", "brcm,bcm23550" or "brcm,bcm-nsp-smp".
+
+      This includes the following SoCs: |
+      BCM11130, BCM11140, BCM11351, BCM28145, BCM28155, BCM21664, BCM23550
+      BCM58522, BCM58525, BCM58535, BCM58622, BCM58623, BCM58625, BCM88312
+
+      The secondary-boot-reg property is a u32 value that specifies the
+      physical address of the register used to request the ROM holding pen
+      code release a secondary CPU. The value written to the register is
+      formed by encoding the target CPU id into the low bits of the
+      physical start address it should jump to.
+
+if:
+  # If the enable-method property contains one of those values
+  properties:
+    enable-method:
+      contains:
+        enum:
+          - brcm,bcm11351-cpu-method
+          - brcm,bcm23550
+          - brcm,bcm-nsp-smp
+  # and if enable-method is present
+  required:
+    - enable-method
+
+then:
+   required:
+     - secondary-boot-reg
+
 required:
   - device_type
   - reg
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
index e07735a8..623fedf 100644
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
@@ -164,7 +164,18 @@
 - compatible: should be:
               "fsl,imx8qxp-sc-key"
               followed by "fsl,imx-sc-key";
-- linux,keycodes: See Documentation/devicetree/bindings/input/keys.txt
+- linux,keycodes: See Documentation/devicetree/bindings/input/input.yaml
+
+Thermal bindings based on SCU Message Protocol
+------------------------------------------------------------
+
+Required properties:
+- compatible:			Should be :
+				  "fsl,imx8qxp-sc-thermal"
+				followed by "fsl,imx-sc-thermal";
+
+- #thermal-sensor-cells:	See Documentation/devicetree/bindings/thermal/thermal.txt
+				for a description.
 
 Example (imx8qxp):
 -------------
@@ -238,6 +249,11 @@
 			compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
 			timeout-sec = <60>;
 		};
+
+		tsens: thermal-sensor {
+			compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal";
+			#thermal-sensor-cells = <1>;
+		};
 	};
 };
 
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 0e17e1f..cd3fbe7 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -119,6 +119,10 @@
               - fsl,imx6q-sabreauto
               - fsl,imx6q-sabrelite
               - fsl,imx6q-sabresd
+              - technexion,imx6q-pico-dwarf   # TechNexion i.MX6Q Pico-Dwarf
+              - technexion,imx6q-pico-hobbit  # TechNexion i.MX6Q Pico-Hobbit
+              - technexion,imx6q-pico-nymph   # TechNexion i.MX6Q Pico-Nymph
+              - technexion,imx6q-pico-pi      # TechNexion i.MX6Q Pico-Pi
               - technologic,imx6q-ts4900
               - technologic,imx6q-ts7970
               - toradex,apalis_imx6q            # Apalis iMX6 Module
@@ -166,6 +170,10 @@
               - emtrion,emcon-mx6-avari   # emCON-MX6S or emCON-MX6DL SoM on Avari Base
               - fsl,imx6dl-sabreauto      # i.MX6 DualLite/Solo SABRE Automotive Board
               - fsl,imx6dl-sabresd        # i.MX6 DualLite SABRE Smart Device Board
+              - technexion,imx6dl-pico-dwarf   # TechNexion i.MX6DL Pico-Dwarf
+              - technexion,imx6dl-pico-hobbit  # TechNexion i.MX6DL Pico-Hobbit
+              - technexion,imx6dl-pico-nymph   # TechNexion i.MX6DL Pico-Nymph
+              - technexion,imx6dl-pico-pi      # TechNexion i.MX6DL Pico-Pi
               - technologic,imx6dl-ts4900
               - technologic,imx6dl-ts7970
               - toradex,colibri_imx6dl          # Colibri iMX6 Module
@@ -225,6 +233,9 @@
               - fsl,imx6ul-14x14-evk      # i.MX6 UltraLite 14x14 EVK Board
               - kontron,imx6ul-n6310-som  # Kontron N6310 SOM
               - kontron,imx6ul-n6311-som  # Kontron N6311 SOM
+              - technexion,imx6ul-pico-dwarf   # TechNexion i.MX6UL Pico-Dwarf
+              - technexion,imx6ul-pico-hobbit  # TechNexion i.MX6UL Pico-Hobbit
+              - technexion,imx6ul-pico-pi      # TechNexion i.MX6UL Pico-Pi
           - const: fsl,imx6ul
 
       - description: Kontron N6310 S Board
@@ -274,6 +285,7 @@
         items:
           - enum:
               - toradex,colibri-imx7s           # Colibri iMX7 Solo Module
+              - toradex,colibri-imx7s-aster     # Colibri iMX7 Solo Module on Aster Carrier Board
               - toradex,colibri-imx7s-eval-v3   # Colibri iMX7 Solo Module on Colibri Evaluation Board V3
               - tq,imx7s-mba7             # i.MX7S TQ MBa7 with TQMa7S SoM
           - const: fsl,imx7s
@@ -284,8 +296,14 @@
               - fsl,imx7d-sdb             # i.MX7 SabreSD Board
               - fsl,imx7d-sdb-reva        # i.MX7 SabreSD Rev-A Board
               - novtech,imx7d-meerkat96   # i.MX7 Meerkat96 Board
+              - technexion,imx7d-pico-dwarf   # TechNexion i.MX7D Pico-Dwarf
+              - technexion,imx7d-pico-hobbit  # TechNexion i.MX7D Pico-Hobbit
+              - technexion,imx7d-pico-nymph   # TechNexion i.MX7D Pico-Nymph
+              - technexion,imx7d-pico-pi      # TechNexion i.MX7D Pico-Pi
               - toradex,colibri-imx7d                   # Colibri iMX7 Dual Module
+              - toradex,colibri-imx7d-aster             # Colibri iMX7 Dual Module on Aster Carrier Board
               - toradex,colibri-imx7d-emmc              # Colibri iMX7 Dual 1GB (eMMC) Module
+              - toradex,colibri-imx7d-emmc-aster        # Colibri iMX7 Dual 1GB (eMMC) Module on Aster Carrier Board
               - toradex,colibri-imx7d-emmc-eval-v3      # Colibri iMX7 Dual 1GB (eMMC) Module on Colibri Evaluation Board V3
               - toradex,colibri-imx7d-eval-v3           # Colibri iMX7 Dual Module on Colibri Evaluation Board V3
               - tq,imx7d-mba7             # i.MX7D TQ MBa7 with TQMa7D SoM
@@ -324,6 +342,12 @@
               - fsl,imx8mn-evk            # i.MX8MN LPDDR4 EVK Board
           - const: fsl,imx8mn
 
+      - description: i.MX8MP based Boards
+        items:
+          - enum:
+              - fsl,imx8mp-evk            # i.MX8MP EVK Board
+          - const: fsl,imx8mp
+
       - description: i.MX8MQ based Boards
         items:
           - enum:
@@ -395,6 +419,51 @@
               - fsl,ls1021a-twr
           - const: fsl,ls1021a
 
+      - description: LS1028A based Boards
+        items:
+          - enum:
+              - fsl,ls1028a-qds
+              - fsl,ls1028a-rdb
+          - const: fsl,ls1028a
+
+      - description: Kontron KBox A-230-LS
+        items:
+          - const: kontron,kbox-a-230-ls
+          - const: kontron,sl28-var4
+          - const: kontron,sl28
+          - const: fsl,ls1028a
+      - description:
+          Kontron SMARC-sAL28 board on the SMARC Eval Carrier 2.0
+        items:
+          - enum:
+              - kontron,sl28-var2-ads2
+              - kontron,sl28-var3-ads2
+              - kontron,sl28-var4-ads2
+          - enum:
+              - kontron,sl28-var2
+              - kontron,sl28-var3
+              - kontron,sl28-var4
+          - const: kontron,sl28
+          - const: fsl,ls1028a
+
+      - description:
+          Kontron SMARC-sAL28 board (on a generic/undefined carrier)
+        items:
+          - enum:
+              - kontron,sl28-var2
+              - kontron,sl28-var3
+              - kontron,sl28-var4
+          - const: kontron,sl28
+          - const: fsl,ls1028a
+
+      - description:
+          Kontron SMARC-sAL28 board (base). This is used in the base device
+          tree which is compatible with the overlays provided by the
+          vendor.
+        items:
+          - const: kontron,sl28
+          - const: fsl,ls1028a
+
       - description: LS1043A based Boards
         items:
           - enum:
diff --git a/Documentation/devicetree/bindings/arm/l2c2x0.yaml b/Documentation/devicetree/bindings/arm/l2c2x0.yaml
index 913a8cd..5d1d50e 100644
--- a/Documentation/devicetree/bindings/arm/l2c2x0.yaml
+++ b/Documentation/devicetree/bindings/arm/l2c2x0.yaml
@@ -29,27 +29,30 @@
 
 properties:
   compatible:
-    enum:
-      - arm,pl310-cache
-      - arm,l220-cache
-      - arm,l210-cache
-        # DEPRECATED by "brcm,bcm11351-a2-pl310-cache"
-      - bcm,bcm11351-a2-pl310-cache
-        # For Broadcom bcm11351 chipset where an
-        # offset needs to be added to the address before passing down to the L2
-        # cache controller
-      - brcm,bcm11351-a2-pl310-cache
-        # Marvell Controller designed to be
-        # compatible with the ARM one, with system cache mode (meaning
-        # maintenance operations on L1 are broadcasted to the L2 and L2
-        # performs the same operation).
-      - marvell,aurora-system-cache
-        # Marvell Controller designed to be
-        # compatible with the ARM one with outer cache mode.
-      - marvell,aurora-outer-cache
-        # Marvell Tauros3 cache controller, compatible
-        # with arm,pl310-cache controller.
-      - marvell,tauros3-cache
+    oneOf:
+      - enum:
+          - arm,pl310-cache
+          - arm,l220-cache
+          - arm,l210-cache
+            # DEPRECATED by "brcm,bcm11351-a2-pl310-cache"
+          - bcm,bcm11351-a2-pl310-cache
+            # For Broadcom bcm11351 chipset where an
+            # offset needs to be added to the address before passing down to the L2
+            # cache controller
+          - brcm,bcm11351-a2-pl310-cache
+            # Marvell Controller designed to be
+            # compatible with the ARM one, with system cache mode (meaning
+            # maintenance operations on L1 are broadcasted to the L2 and L2
+            # performs the same operation).
+          - marvell,aurora-system-cache
+            # Marvell Controller designed to be
+            # compatible with the ARM one with outer cache mode.
+          - marvell,aurora-outer-cache
+      - items:
+           # Marvell Tauros3 cache controller, compatible
+           # with arm,pl310-cache controller.
+          - const: marvell,tauros3-cache
+          - const: arm,pl310-cache
 
   cache-level:
     const: 2
diff --git a/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml b/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml
index 818dfe6..3235ec9 100644
--- a/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml
+++ b/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml
@@ -28,8 +28,11 @@
         items:
           - enum:
               - mrvl,mmp2-brownstone
+              - olpc,xo-1.75
           - const: mrvl,mmp2
       - description: MMP3 based boards
         items:
-          - const: mrvl,mmp3
+          - enum:
+              - dell,wyse-ariel
+          - const: marvell,mmp3
 ...
diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml
index 79902f4..c3a8604 100644
--- a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml
+++ b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml
@@ -43,6 +43,8 @@
   - reg-names
   - interrupts
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git a/Documentation/devicetree/bindings/arm/pmu.yaml b/Documentation/devicetree/bindings/arm/pmu.yaml
index 52ae094..97df36d 100644
--- a/Documentation/devicetree/bindings/arm/pmu.yaml
+++ b/Documentation/devicetree/bindings/arm/pmu.yaml
@@ -20,27 +20,36 @@
     items:
       - enum:
           - apm,potenza-pmu
-          - arm,armv8-pmuv3
-          - arm,cortex-a73-pmu
-          - arm,cortex-a72-pmu
-          - arm,cortex-a57-pmu
-          - arm,cortex-a53-pmu
-          - arm,cortex-a35-pmu
-          - arm,cortex-a17-pmu
-          - arm,cortex-a15-pmu
-          - arm,cortex-a12-pmu
-          - arm,cortex-a9-pmu
-          - arm,cortex-a8-pmu
-          - arm,cortex-a7-pmu
-          - arm,cortex-a5-pmu
-          - arm,arm11mpcore-pmu
-          - arm,arm1176-pmu
+          - arm,armv8-pmuv3 # Only for s/w models
           - arm,arm1136-pmu
+          - arm,arm1176-pmu
+          - arm,arm11mpcore-pmu
+          - arm,cortex-a5-pmu
+          - arm,cortex-a7-pmu
+          - arm,cortex-a8-pmu
+          - arm,cortex-a9-pmu
+          - arm,cortex-a12-pmu
+          - arm,cortex-a15-pmu
+          - arm,cortex-a17-pmu
+          - arm,cortex-a32-pmu
+          - arm,cortex-a34-pmu
+          - arm,cortex-a35-pmu
+          - arm,cortex-a53-pmu
+          - arm,cortex-a55-pmu
+          - arm,cortex-a57-pmu
+          - arm,cortex-a65-pmu
+          - arm,cortex-a72-pmu
+          - arm,cortex-a73-pmu
+          - arm,cortex-a75-pmu
+          - arm,cortex-a76-pmu
+          - arm,cortex-a77-pmu
+          - arm,neoverse-e1-pmu
+          - arm,neoverse-n1-pmu
           - brcm,vulcan-pmu
           - cavium,thunder-pmu
+          - qcom,krait-pmu
           - qcom,scorpion-pmu
           - qcom,scorpion-mp-pmu
-          - qcom,krait-pmu
 
   interrupts:
     # Don't know how many CPUs, so no constraints to specify
diff --git a/Documentation/devicetree/bindings/arm/psci.yaml b/Documentation/devicetree/bindings/arm/psci.yaml
index 5e66934..9247b58 100644
--- a/Documentation/devicetree/bindings/arm/psci.yaml
+++ b/Documentation/devicetree/bindings/arm/psci.yaml
@@ -32,6 +32,9 @@
     http://infocenter.arm.com/help/topic/com.arm.doc.den0022c/DEN0022C_Power_State_Coordination_Interface.pdf
 
 properties:
+  $nodename:
+    const: psci
+
   compatible:
     oneOf:
       - description:
@@ -141,6 +144,8 @@
         - cpu_off
         - cpu_on
 
+additionalProperties: false
+
 examples:
   - |+
 
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 5976c0b..64ddae3 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -28,6 +28,7 @@
         apq8074
         apq8084
         apq8096
+        ipq6018
         ipq8074
         mdm9615
         msm8916
@@ -41,6 +42,7 @@
   The 'board' element must be one of the following strings:
 
         cdp
+        cp01-c1
         dragonboard
         hk01
         idp
@@ -150,4 +152,10 @@
           - enum:
               - qcom,sc7180-idp
           - const: qcom,sc7180
+
+      - items:
+          - enum:
+              - qcom,ipq6018-cp01-c1
+          - const: qcom,ipq6018
+
 ...
diff --git a/Documentation/devicetree/bindings/arm/renesas,prr.yaml b/Documentation/devicetree/bindings/arm/renesas,prr.yaml
index 7f8d17f..dd08764 100644
--- a/Documentation/devicetree/bindings/arm/renesas,prr.yaml
+++ b/Documentation/devicetree/bindings/arm/renesas,prr.yaml
@@ -27,6 +27,8 @@
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     prr: chipid@ff000044 {
diff --git a/Documentation/devicetree/bindings/arm/renesas.yaml b/Documentation/devicetree/bindings/arm/renesas.yaml
index 9436124..611094d 100644
--- a/Documentation/devicetree/bindings/arm/renesas.yaml
+++ b/Documentation/devicetree/bindings/arm/renesas.yaml
@@ -208,6 +208,7 @@
       - description: R-Car M3-W+ (R8A77961)
         items:
           - enum:
+              - renesas,m3ulcb # M3ULCB (R-Car Starter Kit Pro, RTP8J77961ASKB0SK0SA05A (M3 ES3.0))
               - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version, RTP0RC7796SIPB0012SA5A)
           - const: renesas,r8a77961
 
diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index 874b0ea..715586d 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -402,6 +402,11 @@
           - const: phytec,rk3288-phycore-som
           - const: rockchip,rk3288
 
+      - description: Pine64 PinebookPro
+        items:
+          - const: pine64,pinebook-pro
+          - const: rockchip,rk3399
+
       - description: Pine64 Rock64
         items:
           - const: pine64,rock64
@@ -443,7 +448,7 @@
 
       - description: Rockchip Kylin
         items:
-          - const: rockchip,kylin-rk3036
+          - const: rockchip,rk3036-kylin
           - const: rockchip,rk3036
 
       - description: Rockchip PX3 Evaluation board
@@ -468,6 +473,11 @@
           - const: rockchip,r88
           - const: rockchip,rk3368
 
+      - description: Rockchip RK3036 Evaluation board
+        items:
+          - const: rockchip,rk3036-evb
+          - const: rockchip,rk3036
+
       - description: Rockchip RK3228 Evaluation board
         items:
           - const: rockchip,rk3228-evb
diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml
index afcd708..0425d33 100644
--- a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml
+++ b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml
@@ -30,6 +30,8 @@
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     chipid@10000000 {
diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
index 73b56fc..c965189 100644
--- a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
+++ b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
@@ -89,6 +89,8 @@
   - clock-names
   - clocks
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/exynos5250.h>
diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-secure-firmware.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-secure-firmware.yaml
index 51d23b6..3d9abad 100644
--- a/Documentation/devicetree/bindings/arm/samsung/samsung-secure-firmware.yaml
+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-secure-firmware.yaml
@@ -23,6 +23,8 @@
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     firmware@203f000 {
diff --git a/Documentation/devicetree/bindings/arm/socionext/cache-uniphier.txt b/Documentation/devicetree/bindings/arm/socionext/cache-uniphier.txt
deleted file mode 100644
index d27a646..0000000
--- a/Documentation/devicetree/bindings/arm/socionext/cache-uniphier.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-UniPhier outer cache controller
-
-UniPhier SoCs are integrated with a full-custom outer cache controller system.
-All of them have a level 2 cache controller, and some have a level 3 cache
-controller as well.
-
-Required properties:
-- compatible: should be "socionext,uniphier-system-cache"
-- reg: offsets and lengths of the register sets for the device.  It should
-  contain 3 regions: control register, revision register, operation register,
-  in this order.
-- cache-unified: specifies the cache is a unified cache.
-- cache-size: specifies the size in bytes of the cache
-- cache-sets: specifies the number of associativity sets of the cache
-- cache-line-size: specifies the line size in bytes
-- cache-level: specifies the level in the cache hierarchy.  The value should
-  be 2 for L2 cache, 3 for L3 cache, etc.
-
-Optional properties:
-- next-level-cache: phandle to the next level cache if present.  The next level
-  cache should be also compatible with "socionext,uniphier-system-cache".
-
-The L2 cache must exist to use the L3 cache; the cache hierarchy must be
-indicated correctly with "next-level-cache" properties.
-
-Example 1 (system with L2):
-	l2: l2-cache@500c0000 {
-		compatible = "socionext,uniphier-system-cache";
-		reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
-		      <0x506c0000 0x400>;
-		cache-unified;
-		cache-size = <0x80000>;
-		cache-sets = <256>;
-		cache-line-size = <128>;
-		cache-level = <2>;
-	};
-
-Example 2 (system with L2 and L3):
-	l2: l2-cache@500c0000 {
-		compatible = "socionext,uniphier-system-cache";
-		reg = <0x500c0000 0x2000>, <0x503c0100 0x8>,
-		      <0x506c0000 0x400>;
-		cache-unified;
-		cache-size = <0x200000>;
-		cache-sets = <512>;
-		cache-line-size = <128>;
-		cache-level = <2>;
-		next-level-cache = <&l3>;
-	};
-
-	l3: l3-cache@500c8000 {
-		compatible = "socionext,uniphier-system-cache";
-		reg = <0x500c8000 0x2000>, <0x503c8100 0x8>,
-		      <0x506c8000 0x400>;
-		cache-unified;
-		cache-size = <0x400000>;
-		cache-sets = <512>;
-		cache-line-size = <256>;
-		cache-level = <3>;
-	};
diff --git a/Documentation/devicetree/bindings/arm/socionext/socionext,uniphier-system-cache.yaml b/Documentation/devicetree/bindings/arm/socionext/socionext,uniphier-system-cache.yaml
new file mode 100644
index 0000000..2e765bb
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/socionext/socionext,uniphier-system-cache.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/socionext/socionext,uniphier-system-cache.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier outer cache controller
+
+description: |
+  UniPhier ARM 32-bit SoCs are integrated with a full-custom outer cache
+  controller system. All of them have a level 2 cache controller, and some
+  have a level 3 cache controller as well.
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+properties:
+  compatible:
+    const: socionext,uniphier-system-cache
+
+  reg:
+    description: |
+      should contain 3 regions: control register, revision register,
+      operation register, in this order.
+    minItems: 3
+    maxItems: 3
+
+  interrupts:
+    description: |
+      Interrupts can be used to notify the completion of cache operations.
+      The number of interrupts should match to the number of CPU cores.
+      The specified interrupts correspond to CPU0, CPU1, ... in this order.
+      minItems: 1
+      maxItems: 4
+
+  cache-unified: true
+
+  cache-size: true
+
+  cache-sets: true
+
+  cache-line-size: true
+
+  cache-level:
+    minimum: 2
+    maximum: 3
+
+  next-level-cache: true
+
+allOf:
+  - $ref: /schemas/cache-controller.yaml#
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - cache-unified
+  - cache-size
+  - cache-sets
+  - cache-line-size
+  - cache-level
+
+examples:
+  - |
+    // System with L2.
+    cache-controller@500c0000 {
+        compatible = "socionext,uniphier-system-cache";
+        reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>;
+        interrupts = <0 174 4>, <0 175 4>, <0 190 4>, <0 191 4>;
+        cache-unified;
+        cache-size = <0x140000>;
+        cache-sets = <512>;
+        cache-line-size = <128>;
+        cache-level = <2>;
+    };
+  - |
+    // System with L2 and L3.
+    //   L2 should specify the next level cache by 'next-level-cache'.
+    l2: cache-controller@500c0000 {
+        compatible = "socionext,uniphier-system-cache";
+        reg = <0x500c0000 0x2000>, <0x503c0100 0x8>, <0x506c0000 0x400>;
+        interrupts = <0 190 4>, <0 191 4>;
+        cache-unified;
+        cache-size = <0x200000>;
+        cache-sets = <512>;
+        cache-line-size = <128>;
+        cache-level = <2>;
+        next-level-cache = <&l3>;
+    };
+
+    l3: cache-controller@500c8000 {
+        compatible = "socionext,uniphier-system-cache";
+        reg = <0x500c8000 0x2000>, <0x503c8100 0x8>, <0x506c8000 0x400>;
+        interrupts = <0 174 4>, <0 175 4>;
+        cache-unified;
+        cache-size = <0x200000>;
+        cache-sets = <512>;
+        cache-line-size = <256>;
+        cache-level = <3>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/socionext/uniphier.txt b/Documentation/devicetree/bindings/arm/socionext/uniphier.txt
deleted file mode 100644
index b3ed103..0000000
--- a/Documentation/devicetree/bindings/arm/socionext/uniphier.txt
+++ /dev/null
@@ -1,47 +0,0 @@
-Socionext UniPhier SoC family
------------------------------
-
-Required properties in the root node:
-  - compatible: should contain board and SoC compatible strings
-
-SoC and board compatible strings:
-  (sorted chronologically)
-
-  - LD4 SoC:  "socionext,uniphier-ld4"
-      - Reference Board: "socionext,uniphier-ld4-ref"
-
-  - Pro4 SoC: "socionext,uniphier-pro4"
-      - Reference Board: "socionext,uniphier-pro4-ref"
-      - Ace Board:       "socionext,uniphier-pro4-ace"
-      - Sanji Board:     "socionext,uniphier-pro4-sanji"
-
-  - sLD8 SoC: "socionext,uniphier-sld8"
-      - Reference Board: "socionext,uniphier-sld8-ref"
-
-  - PXs2 SoC: "socionext,uniphier-pxs2"
-      - Gentil Board:    "socionext,uniphier-pxs2-gentil"
-      - Vodka Board:     "socionext,uniphier-pxs2-vodka"
-
-  - LD6b SoC: "socionext,uniphier-ld6b"
-      - Reference Board: "socionext,uniphier-ld6b-ref"
-
-  - LD11 SoC: "socionext,uniphier-ld11"
-      - Reference Board: "socionext,uniphier-ld11-ref"
-      - Global Board:    "socionext,uniphier-ld11-global"
-
-  - LD20 SoC: "socionext,uniphier-ld20"
-      - Reference Board: "socionext,uniphier-ld20-ref"
-      - Global Board:    "socionext,uniphier-ld20-global"
-
-  - PXs3 SoC: "socionext,uniphier-pxs3"
-      - Reference Board: "socionext,uniphier-pxs3-ref"
-
-Example:
-
-/dts-v1/;
-
-/ {
-	compatible = "socionext,uniphier-ld20-ref", "socionext,uniphier-ld20";
-
-	...
-};
diff --git a/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml b/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml
new file mode 100644
index 0000000..65ad6d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/socionext/uniphier.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier platform device tree bindings
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+properties:
+  $nodename:
+    const: /
+  compatible:
+    oneOf:
+      - description: LD4 SoC boards
+        items:
+          - enum:
+            - socionext,uniphier-ld4-ref
+          - const: socionext,uniphier-ld4
+      - description: Pro4 SoC boards
+        items:
+          - enum:
+            - socionext,uniphier-pro4-ace
+            - socionext,uniphier-pro4-ref
+            - socionext,uniphier-pro4-sanji
+          - const: socionext,uniphier-pro4
+      - description: sLD8 SoC boards
+        items:
+          - enum:
+            - socionext,uniphier-sld8-ref
+          - const: socionext,uniphier-sld8
+      - description: PXs2 SoC boards
+        items:
+          - enum:
+            - socionext,uniphier-pxs2-gentil
+            - socionext,uniphier-pxs2-vodka
+          - const: socionext,uniphier-pxs2
+      - description: LD6b SoC boards
+        items:
+          - enum:
+            - socionext,uniphier-ld6b-ref
+          - const: socionext,uniphier-ld6b
+      - description: LD11 SoC boards
+        items:
+          - enum:
+            - socionext,uniphier-ld11-global
+            - socionext,uniphier-ld11-ref
+          - const: socionext,uniphier-ld11
+      - description: LD20 SoC boards
+        items:
+          - enum:
+            - socionext,uniphier-ld20-global
+            - socionext,uniphier-ld20-ref
+          - const: socionext,uniphier-ld20
+      - description: PXs3 SoC boards
+        items:
+          - enum:
+            - socionext,uniphier-pxs3-ref
+          - const: socionext,uniphier-pxs3
diff --git a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
index 0dedf94..baff801 100644
--- a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
+++ b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
@@ -29,6 +29,8 @@
   - reg
   - clocks
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/stm32mp1-clks.h>
diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml
index 327ce67..abf2d97 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.yaml
+++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
@@ -394,6 +394,12 @@
           - const: linksprite,pcduino3-nano
           - const: allwinner,sun7i-a20
 
+      - description: Linutronix Testbox v2
+        items:
+          - const: linutronix,testbox-v2
+          - const: lamobo,lamobo-r1
+          - const: allwinner,sun7i-a20
+
       - description: HAOYU Electronics Marsboard A10
         items:
           - const: haoyu,a10-marsboard
@@ -636,6 +642,21 @@
           - const: pine64,pinebook
           - const: allwinner,sun50i-a64
 
+      - description: Pine64 PinePhone Developer Batch (1.0)
+        items:
+          - const: pine64,pinephone-1.0
+          - const: allwinner,sun50i-a64
+
+      - description: Pine64 PinePhone Braveheart (1.1)
+        items:
+          - const: pine64,pinephone-1.1
+          - const: allwinner,sun50i-a64
+
+      - description: Pine64 PineTab
+        items:
+          - const: pine64,pinetab
+          - const: allwinner,sun50i-a64
+
       - description: Pine64 SoPine Baseboard
         items:
           - const: pine64,sopine-baseboard
@@ -647,6 +668,11 @@
           - const: pineriver,mini-xplus
           - const: allwinner,sun4i-a10
 
+      - description: PocketBook Touch Lux 3
+        items:
+          - const: pocketbook,touch-lux-3
+          - const: allwinner,sun5i-a13
+
       - description: Point of View Protab2-IPS9
         items:
           - const: pov,protab2-ips9
diff --git a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml
index 9370e64..e713a6f 100644
--- a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml
+++ b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml
@@ -30,6 +30,7 @@
     enum:
       - allwinner,sun5i-a13-mbus
       - allwinner,sun8i-h3-mbus
+      - allwinner,sun50i-a64-mbus
 
   reg:
     maxItems: 1
@@ -41,6 +42,10 @@
     description:
       See section 2.3.9 of the DeviceTree Specification.
 
+  '#address-cells': true
+
+  '#size-cells': true
+
 required:
   - "#interconnect-cells"
   - compatible
@@ -58,6 +63,8 @@
         compatible = "allwinner,sun5i-a13-mbus";
         reg = <0x01c01000 0x1000>;
         clocks = <&ccu CLK_MBUS>;
+        #address-cells = <1>;
+        #size-cells = <1>;
         dma-ranges = <0x00000000 0x40000000 0x20000000>;
         #interconnect-cells = <1>;
     };
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
deleted file mode 100644
index cb12f33..0000000
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
+++ /dev/null
@@ -1,300 +0,0 @@
-NVIDIA Tegra Power Management Controller (PMC)
-
-== Power Management Controller Node ==
-
-The PMC block interacts with an external Power Management Unit. The PMC
-mostly controls the entry and exit of the system from different sleep
-modes. It provides power-gating controllers for SoC and CPU power-islands.
-
-Required properties:
-- name : Should be pmc
-- compatible : Should contain one of the following:
-	For Tegra20 must contain "nvidia,tegra20-pmc".
-	For Tegra30 must contain "nvidia,tegra30-pmc".
-	For Tegra114 must contain "nvidia,tegra114-pmc"
-	For Tegra124 must contain "nvidia,tegra124-pmc"
-	For Tegra132 must contain "nvidia,tegra124-pmc"
-	For Tegra210 must contain "nvidia,tegra210-pmc"
-- reg : Offset and length of the register set for the device
-- clocks : Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names : Must include the following entries:
-  "pclk" (The Tegra clock of that name),
-  "clk32k_in" (The 32KHz clock input to Tegra).
-
-Optional properties:
-- nvidia,invert-interrupt : If present, inverts the PMU interrupt signal.
-  The PMU is an external Power Management Unit, whose interrupt output
-  signal is fed into the PMC. This signal is optionally inverted, and then
-  fed into the ARM GIC. The PMC is not involved in the detection or
-  handling of this interrupt signal, merely its inversion.
-- nvidia,suspend-mode : The suspend mode that the platform should use.
-  Valid values are 0, 1 and 2:
-  0 (LP0): CPU + Core voltage off and DRAM in self-refresh
-  1 (LP1): CPU voltage off and DRAM in self-refresh
-  2 (LP2): CPU voltage off
-- nvidia,core-power-req-active-high : Boolean, core power request active-high
-- nvidia,sys-clock-req-active-high : Boolean, system clock request active-high
-- nvidia,combined-power-req : Boolean, combined power request for CPU & Core
-- nvidia,cpu-pwr-good-en : Boolean, CPU power good signal (from PMIC to PMC)
-			   is enabled.
-
-Required properties when nvidia,suspend-mode is specified:
-- nvidia,cpu-pwr-good-time : CPU power good time in uS.
-- nvidia,cpu-pwr-off-time : CPU power off time in uS.
-- nvidia,core-pwr-good-time : <Oscillator-stable-time Power-stable-time>
-			      Core power good time in uS.
-- nvidia,core-pwr-off-time : Core power off time in uS.
-
-Required properties when nvidia,suspend-mode=<0>:
-- nvidia,lp0-vec : <start length> Starting address and length of LP0 vector
-  The LP0 vector contains the warm boot code that is executed by AVP when
-  resuming from the LP0 state. The AVP (Audio-Video Processor) is an ARM7
-  processor and always being the first boot processor when chip is power on
-  or resume from deep sleep mode. When the system is resumed from the deep
-  sleep mode, the warm boot code will restore some PLLs, clocks and then
-  bring up CPU0 for resuming the system.
-
-Hardware-triggered thermal reset:
-On Tegra30, Tegra114 and Tegra124, if the 'i2c-thermtrip' subnode exists,
-hardware-triggered thermal reset will be enabled.
-
-Required properties for hardware-triggered thermal reset (inside 'i2c-thermtrip'):
-- nvidia,i2c-controller-id : ID of I2C controller to send poweroff command to. Valid values are
-                             described in section 9.2.148 "APBDEV_PMC_SCRATCH53_0" of the
-                             Tegra K1 Technical Reference Manual.
-- nvidia,bus-addr : Bus address of the PMU on the I2C bus
-- nvidia,reg-addr : I2C register address to write poweroff command to
-- nvidia,reg-data : Poweroff command to write to PMU
-
-Optional properties for hardware-triggered thermal reset (inside 'i2c-thermtrip'):
-- nvidia,pinmux-id : Pinmux used by the hardware when issuing poweroff command.
-                     Defaults to 0. Valid values are described in section 12.5.2
-                     "Pinmux Support" of the Tegra4 Technical Reference Manual.
-
-Optional nodes:
-- powergates : This node contains a hierarchy of power domain nodes, which
-	       should match the powergates on the Tegra SoC. See "Powergate
-	       Nodes" below.
-
-Example:
-
-/ SoC dts including file
-pmc@7000f400 {
-	compatible = "nvidia,tegra20-pmc";
-	reg = <0x7000e400 0x400>;
-	clocks = <&tegra_car 110>, <&clk32k_in>;
-	clock-names = "pclk", "clk32k_in";
-	nvidia,invert-interrupt;
-	nvidia,suspend-mode = <1>;
-	nvidia,cpu-pwr-good-time = <2000>;
-	nvidia,cpu-pwr-off-time = <100>;
-	nvidia,core-pwr-good-time = <3845 3845>;
-	nvidia,core-pwr-off-time = <458>;
-	nvidia,core-power-req-active-high;
-	nvidia,sys-clock-req-active-high;
-	nvidia,lp0-vec = <0xbdffd000 0x2000>;
-};
-
-/ Tegra board dts file
-{
-	...
-	pmc@7000f400 {
-		i2c-thermtrip {
-			nvidia,i2c-controller-id = <4>;
-			nvidia,bus-addr = <0x40>;
-			nvidia,reg-addr = <0x36>;
-			nvidia,reg-data = <0x2>;
-		};
-	};
-	...
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock {
-			compatible = "fixed-clock";
-			reg=<0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-	...
-};
-
-
-== Powergate Nodes ==
-
-Each of the powergate nodes represents a power-domain on the Tegra SoC
-that can be power-gated by the Tegra PMC. The name of the powergate node
-should be one of the below. Note that not every powergate is applicable
-to all Tegra devices and the following list shows which powergates are
-applicable to which devices. Please refer to the Tegra TRM for more
-details on the various powergates.
-
- Name		Description			Devices Applicable
- 3d		3D Graphics			Tegra20/114/124/210
- 3d0		3D Graphics 0			Tegra30
- 3d1		3D Graphics 1			Tegra30
- aud		Audio				Tegra210
- dfd		Debug				Tegra210
- dis		Display A			Tegra114/124/210
- disb		Display B			Tegra114/124/210
- heg		2D Graphics			Tegra30/114/124/210
- iram		Internal RAM			Tegra124/210
- mpe		MPEG Encode			All
- nvdec		NVIDIA Video Decode Engine	Tegra210
- nvjpg		NVIDIA JPEG Engine		Tegra210
- pcie		PCIE				Tegra20/30/124/210
- sata		SATA				Tegra30/124/210
- sor		Display interfaces		Tegra124/210
- ve2		Video Encode Engine 2		Tegra210
- venc		Video Encode Engine		All
- vdec		Video Decode Engine		Tegra20/30/114/124
- vic		Video Imaging Compositor	Tegra124/210
- xusba		USB Partition A			Tegra114/124/210
- xusbb		USB Partition B 		Tegra114/124/210
- xusbc		USB Partition C			Tegra114/124/210
-
-Required properties:
-  - clocks: Must contain an entry for each clock required by the PMC for
-    controlling a power-gate. See ../clocks/clock-bindings.txt for details.
-  - resets: Must contain an entry for each reset required by the PMC for
-    controlling a power-gate. See ../reset/reset.txt for details.
-  - #power-domain-cells: Must be 0.
-
-Example:
-
-	pmc: pmc@7000e400 {
-		compatible = "nvidia,tegra210-pmc";
-		reg = <0x0 0x7000e400 0x0 0x400>;
-		clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>;
-		clock-names = "pclk", "clk32k_in";
-
-		powergates {
-			pd_audio: aud {
-				clocks = <&tegra_car TEGRA210_CLK_APE>,
-					 <&tegra_car TEGRA210_CLK_APB2APE>;
-				resets = <&tegra_car 198>;
-				#power-domain-cells = <0>;
-			};
-		};
-	};
-
-
-== Powergate Clients ==
-
-Hardware blocks belonging to a power domain should contain a "power-domains"
-property that is a phandle pointing to the corresponding powergate node.
-
-Example:
-
-	adma: adma@702e2000 {
-		...
-		power-domains = <&pd_audio>;
-		...
-	};
-
-== Pad Control ==
-
-On Tegra SoCs a pad is a set of pins which are configured as a group.
-The pin grouping is a fixed attribute of the hardware. The PMC can be
-used to set pad power state and signaling voltage. A pad can be either
-in active or power down mode. The support for power state and signaling
-voltage configuration varies depending on the pad in question. 3.3 V and
-1.8 V signaling voltages are supported on pins where software
-controllable signaling voltage switching is available.
-
-The pad configuration state nodes are placed under the pmc node and they
-are referred to by the pinctrl client properties. For more information
-see Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt.
-The pad name should be used as the value of the pins property in pin
-configuration nodes.
-
-The following pads are present on Tegra124 and Tegra132:
-audio		bb		cam		comp
-csia		csb		cse		dsi
-dsib		dsic		dsid		hdmi
-hsic		hv		lvds		mipi-bias
-nand		pex-bias	pex-clk1	pex-clk2
-pex-cntrl	sdmmc1		sdmmc3		sdmmc4
-sys_ddc		uart		usb0		usb1
-usb2		usb_bias
-
-The following pads are present on Tegra210:
-audio		audio-hv	cam		csia
-csib		csic		csid		csie
-csif		dbg		debug-nonao	dmic
-dp		dsi		dsib		dsic
-dsid		emmc		emmc2		gpio
-hdmi		hsic		lvds		mipi-bias
-pex-bias	pex-clk1	pex-clk2	pex-cntrl
-sdmmc1		sdmmc3		spi		spi-hv
-uart		usb0		usb1		usb2
-usb3		usb-bias
-
-Required pin configuration properties:
-  - pins: Must contain name of the pad(s) to be configured.
-
-Optional pin configuration properties:
-  - low-power-enable: Configure the pad into power down mode
-  - low-power-disable: Configure the pad into active mode
-  - power-source: Must contain either TEGRA_IO_PAD_VOLTAGE_1V8
-    or TEGRA_IO_PAD_VOLTAGE_3V3 to select between signaling voltages.
-    The values are defined in
-    include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h.
-
-Note: The power state can be configured on all of the Tegra124 and
-      Tegra132 pads. None of the Tegra124 or Tegra132 pads support
-      signaling voltage switching.
-
-Note: All of the listed Tegra210 pads except pex-cntrl support power
-      state configuration. Signaling voltage switching is supported on
-      following Tegra210 pads: audio, audio-hv, cam, dbg, dmic, gpio,
-      pex-cntrl, sdmmc1, sdmmc3, spi, spi-hv, and uart.
-
-Pad configuration state example:
-	pmc: pmc@7000e400 {
-		compatible = "nvidia,tegra210-pmc";
-		reg = <0x0 0x7000e400 0x0 0x400>;
-		clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>;
-		clock-names = "pclk", "clk32k_in";
-
-		...
-
-		sdmmc1_3v3: sdmmc1-3v3 {
-			pins = "sdmmc1";
-			power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
-		};
-
-		sdmmc1_1v8: sdmmc1-1v8 {
-			pins = "sdmmc1";
-			power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
-		};
-
-		hdmi_off: hdmi-off {
-			pins = "hdmi";
-			low-power-enable;
-		}
-
-		hdmi_on: hdmi-on {
-			pins = "hdmi";
-			low-power-disable;
-		}
-	};
-
-Pinctrl client example:
-	sdmmc1: sdhci@700b0000 {
-		...
-		pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
-		pinctrl-0 = <&sdmmc1_3v3>;
-		pinctrl-1 = <&sdmmc1_1v8>;
-	};
-	...
-	sor@54540000 {
-		...
-		pinctrl-0 = <&hdmi_off>;
-		pinctrl-1 = <&hdmi_on>;
-		pinctrl-names = "hdmi-on", "hdmi-off";
-	};
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml
new file mode 100644
index 0000000..f17bb35
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml
@@ -0,0 +1,354 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/tegra/nvidia,tegra20-pmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra Power Management Controller (PMC)
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jonathan Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra20-pmc
+      - nvidia,tegra20-pmc
+      - nvidia,tegra30-pmc
+      - nvidia,tegra114-pmc
+      - nvidia,tegra124-pmc
+      - nvidia,tegra210-pmc
+
+  reg:
+    maxItems: 1
+    description:
+      Offset and length of the register set for the device.
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: clk32k_in
+    description:
+      Must includes entries pclk and clk32k_in.
+      pclk is the Tegra clock of that name and clk32k_in is 32KHz clock
+      input to Tegra.
+
+  clocks:
+    maxItems: 2
+    description:
+      Must contain an entry for each entry in clock-names.
+      See ../clocks/clocks-bindings.txt for details.
+
+  '#clock-cells':
+    const: 1
+    description:
+      Tegra PMC has clk_out_1, clk_out_2, and clk_out_3.
+      PMC also has blink control which allows 32Khz clock output to
+      Tegra blink pad.
+      Consumer of PMC clock should specify the desired clock by having
+      the clock ID in its "clocks" phandle cell with pmc clock provider.
+      See include/dt-bindings/soc/tegra-pmc.h for the list of Tegra PMC
+      clock IDs.
+
+  '#interrupt-cells':
+    const: 2
+    description:
+      Specifies number of cells needed to encode an interrupt source.
+      The value must be 2.
+
+  interrupt-controller: true
+
+  nvidia,invert-interrupt:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Inverts the PMU interrupt signal.
+      The PMU is an external Power Management Unit, whose interrupt output
+      signal is fed into the PMC. This signal is optionally inverted, and
+      then fed into the ARM GIC. The PMC is not involved in the detection
+      or handling of this interrupt signal, merely its inversion.
+
+  nvidia,core-power-req-active-high:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Core power request active-high.
+
+  nvidia,sys-clock-req-active-high:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: System clock request active-high.
+
+  nvidia,combined-power-req:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: combined power request for CPU and Core.
+
+  nvidia,cpu-pwr-good-en:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      CPU power good signal from external PMIC to PMC is enabled.
+
+  nvidia,suspend-mode:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [0, 1, 2]
+    description:
+      The suspend mode that the platform should use.
+      Mode 0 is for LP0, CPU + Core voltage off and DRAM in self-refresh
+      Mode 1 is for LP1, CPU voltage off and DRAM in self-refresh
+      Mode 2 is for LP2, CPU voltage off
+
+  nvidia,cpu-pwr-good-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: CPU power good time in uSec.
+
+  nvidia,cpu-pwr-off-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: CPU power off time in uSec.
+
+  nvidia,core-pwr-good-time:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      <Oscillator-stable-time Power-stable-time>
+      Core power good time in uSec.
+
+  nvidia,core-pwr-off-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Core power off time in uSec.
+
+  nvidia,lp0-vec:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      <start length> Starting address and length of LP0 vector.
+      The LP0 vector contains the warm boot code that is executed
+      by AVP when resuming from the LP0 state.
+      The AVP (Audio-Video Processor) is an ARM7 processor and
+      always being the first boot processor when chip is power on
+      or resume from deep sleep mode. When the system is resumed
+      from the deep sleep mode, the warm boot code will restore
+      some PLLs, clocks and then brings up CPU0 for resuming the
+      system.
+
+  i2c-thermtrip:
+    type: object
+    description:
+      On Tegra30, Tegra114 and Tegra124 if i2c-thermtrip subnode exists,
+      hardware-triggered thermal reset will be enabled.
+
+    properties:
+      nvidia,i2c-controller-id:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          ID of I2C controller to send poweroff command to PMU.
+          Valid values are described in section 9.2.148
+          "APBDEV_PMC_SCRATCH53_0" of the Tegra K1 Technical Reference
+          Manual.
+
+      nvidia,bus-addr:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: Bus address of the PMU on the I2C bus.
+
+      nvidia,reg-addr:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: PMU I2C register address to issue poweroff command.
+
+      nvidia,reg-data:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: Poweroff command to write to PMU.
+
+      nvidia,pinmux-id:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Pinmux used by the hardware when issuing Poweroff command.
+          Defaults to 0. Valid values are described in section 12.5.2
+          "Pinmux Support" of the Tegra4 Technical Reference Manual.
+
+    required:
+      - nvidia,i2c-controller-id
+      - nvidia,bus-addr
+      - nvidia,reg-addr
+      - nvidia,reg-data
+
+    additionalProperties: false
+
+  powergates:
+    type: object
+    description: |
+      This node contains a hierarchy of power domain nodes, which should
+      match the powergates on the Tegra SoC. Each powergate node
+      represents a power-domain on the Tegra SoC that can be power-gated
+      by the Tegra PMC.
+      Hardware blocks belonging to a power domain should contain
+      "power-domains" property that is a phandle pointing to corresponding
+      powergate node.
+      The name of the powergate node should be one of the below. Note that
+      not every powergate is applicable to all Tegra devices and the following
+      list shows which powergates are applicable to which devices.
+      Please refer to Tegra TRM for mode details on the powergate nodes to
+      use for each power-gate block inside Tegra.
+      Name		Description			            Devices Applicable
+      3d		  3D Graphics			            Tegra20/114/124/210
+      3d0		  3D Graphics 0		            Tegra30
+      3d1		  3D Graphics 1		            Tegra30
+      aud		  Audio				                Tegra210
+      dfd		  Debug				                Tegra210
+      dis		  Display A			              Tegra114/124/210
+      disb		Display B			              Tegra114/124/210
+      heg		  2D Graphics		            	Tegra30/114/124/210
+      iram		Internal RAM		            Tegra124/210
+      mpe		  MPEG Encode			            All
+      nvdec		NVIDIA Video Decode Engine	Tegra210
+      nvjpg		NVIDIA JPEG Engine		      Tegra210
+      pcie		PCIE				                Tegra20/30/124/210
+      sata		SATA				                Tegra30/124/210
+      sor		  Display interfaces       		Tegra124/210
+      ve2		  Video Encode Engine 2		    Tegra210
+      venc		Video Encode Engine		      All
+      vdec		Video Decode Engine		      Tegra20/30/114/124
+      vic		  Video Imaging Compositor	  Tegra124/210
+      xusba		USB Partition A			        Tegra114/124/210
+      xusbb		USB Partition B 		        Tegra114/124/210
+      xusbc		USB Partition C			        Tegra114/124/210
+
+    patternProperties:
+      "^[a-z0-9]+$":
+        type: object
+
+        patternProperties:
+          clocks:
+            minItems: 1
+            maxItems: 8
+            description:
+              Must contain an entry for each clock required by the PMC
+              for controlling a power-gate.
+              See ../clocks/clock-bindings.txt document for more details.
+
+          resets:
+            minItems: 1
+            maxItems: 8
+            description:
+              Must contain an entry for each reset required by the PMC
+              for controlling a power-gate.
+              See ../reset/reset.txt for more details.
+
+          '#power-domain-cells':
+            const: 0
+            description: Must be 0.
+
+        required:
+          - clocks
+          - resets
+          - '#power-domain-cells'
+
+    additionalProperties: false
+
+patternProperties:
+  "^[a-f0-9]+-[a-f0-9]+$":
+    type: object
+    description:
+      This is a Pad configuration node. On Tegra SOCs a pad is a set of
+      pins which are configured as a group. The pin grouping is a fixed
+      attribute of the hardware. The PMC can be used to set pad power state
+      and signaling voltage. A pad can be either in active or power down mode.
+      The support for power state and signaling voltage configuration varies
+      depending on the pad in question. 3.3V and 1.8V signaling voltages
+      are supported on pins where software controllable signaling voltage
+      switching is available.
+
+      The pad configuration state nodes are placed under the pmc node and they
+      are referred to by the pinctrl client properties. For more information
+      see Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt.
+      The pad name should be used as the value of the pins property in pin
+      configuration nodes.
+
+      The following pads are present on Tegra124 and Tegra132
+      audio, bb, cam, comp, csia, csb, cse, dsi, dsib, dsic, dsid, hdmi, hsic,
+      hv, lvds, mipi-bias, nand, pex-bias, pex-clk1, pex-clk2, pex-cntrl,
+      sdmmc1, sdmmc3, sdmmc4, sys_ddc, uart, usb0, usb1, usb2, usb_bias.
+
+      The following pads are present on Tegra210
+      audio, audio-hv, cam, csia, csib, csic, csid, csie, csif, dbg,
+      debug-nonao, dmic, dp, dsi, dsib, dsic, dsid, emmc, emmc2, gpio, hdmi,
+      hsic, lvds, mipi-bias, pex-bias, pex-clk1, pex-clk2, pex-cntrl, sdmmc1,
+      sdmmc3, spi, spi-hv, uart, usb0, usb1, usb2, usb3, usb-bias.
+
+    properties:
+      pins:
+        $ref: /schemas/types.yaml#/definitions/string
+        description: Must contain name of the pad(s) to be configured.
+
+      low-power-enable:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description: Configure the pad into power down mode.
+
+      low-power-disable:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description: Configure the pad into active mode.
+
+      power-source:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Must contain either TEGRA_IO_PAD_VOLTAGE_1V8 or
+          TEGRA_IO_PAD_VOLTAGE_3V3 to select between signaling voltages.
+          The values are defined in
+          include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h.
+          Power state can be configured on all Tegra124 and Tegra132
+          pads. None of the Tegra124 or Tegra132 pads support signaling
+          voltage switching.
+          All of the listed Tegra210 pads except pex-cntrl support power
+          state configuration. Signaling voltage switching is supported
+          on below Tegra210 pads.
+          audio, audio-hv, cam, dbg, dmic, gpio, pex-cntrl, sdmmc1,
+          sdmmc3, spi, spi-hv, and uart.
+
+    required:
+      - pins
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clock-names
+  - clocks
+  - '#clock-cells'
+
+dependencies:
+  "nvidia,suspend-mode": ["nvidia,core-pwr-off-time", "nvidia,cpu-pwr-off-time"]
+  "nvidia,core-pwr-off-time": ["nvidia,core-pwr-good-time"]
+  "nvidia,cpu-pwr-off-time": ["nvidia,cpu-pwr-good-time"]
+
+examples:
+  - |
+
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h>
+    #include <dt-bindings/soc/tegra-pmc.h>
+
+    tegra_pmc: pmc@7000e400 {
+              compatible = "nvidia,tegra210-pmc";
+              reg = <0x0 0x7000e400 0x0 0x400>;
+              clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>;
+              clock-names = "pclk", "clk32k_in";
+              #clock-cells = <1>;
+
+              nvidia,invert-interrupt;
+              nvidia,suspend-mode = <0>;
+              nvidia,cpu-pwr-good-time = <0>;
+              nvidia,cpu-pwr-off-time = <0>;
+              nvidia,core-pwr-good-time = <4587 3876>;
+              nvidia,core-pwr-off-time = <39065>;
+              nvidia,core-power-req-active-high;
+              nvidia,sys-clock-req-active-high;
+
+              powergates {
+                    pd_audio: aud {
+                            clocks = <&tegra_car TEGRA210_CLK_APE>,
+                                     <&tegra_car TEGRA210_CLK_APB2APE>;
+                            resets = <&tegra_car 198>;
+                            #power-domain-cells = <0>;
+                    };
+
+                    pd_xusbss: xusba {
+                            clocks = <&tegra_car TEGRA210_CLK_XUSB_SS>;
+                            resets = <&tegra_car TEGRA210_CLK_XUSB_SS>;
+                            #power-domain-cells = <0>;
+                    };
+              };
+    };
diff --git a/Documentation/devicetree/bindings/arm/vexpress.txt b/Documentation/devicetree/bindings/arm/vexpress.txt
deleted file mode 100644
index 39844cd..0000000
--- a/Documentation/devicetree/bindings/arm/vexpress.txt
+++ /dev/null
@@ -1,229 +0,0 @@
-ARM Versatile Express boards family
------------------------------------
-
-ARM's Versatile Express platform consists of a motherboard and one
-or more daughterboards (tiles). The motherboard provides a set of
-peripherals. Processor and RAM "live" on the tiles.
-
-The motherboard and each core tile should be described by a separate
-Device Tree source file, with the tile's description including
-the motherboard file using a /include/ directive. As the motherboard
-can be initialized in one of two different configurations ("memory
-maps"), care must be taken to include the correct one.
-
-
-Root node
----------
-
-Required properties in the root node:
-- compatible value:
-	compatible = "arm,vexpress,<model>", "arm,vexpress";
-  where <model> is the full tile model name (as used in the tile's
-    Technical Reference Manual), eg.:
-    - for Coretile Express A5x2 (V2P-CA5s):
-	compatible = "arm,vexpress,v2p-ca5s", "arm,vexpress";
-    - for Coretile Express A9x4 (V2P-CA9):
-	compatible = "arm,vexpress,v2p-ca9", "arm,vexpress";
-  If a tile comes in several variants or can be used in more then one
-  configuration, the compatible value should be:
-	compatible = "arm,vexpress,<model>,<variant>", \
-				"arm,vexpress,<model>", "arm,vexpress";
-  eg:
-    - Coretile Express A15x2 (V2P-CA15) with Tech Chip 1:
-	compatible = "arm,vexpress,v2p-ca15,tc1", \
-				"arm,vexpress,v2p-ca15", "arm,vexpress";
-    - LogicTile Express 13MG (V2F-2XV6) running Cortex-A7 (3 cores) SMM:
-	compatible = "arm,vexpress,v2f-2xv6,ca7x3", \
-				"arm,vexpress,v2f-2xv6", "arm,vexpress";
-
-Optional properties in the root node:
-- tile model name (use name from the tile's Technical Reference
-  Manual, eg. "V2P-CA5s")
-	model = "<model>";
-- tile's HBI number (unique ARM's board model ID, visible on the
-  PCB's silkscreen) in hexadecimal transcription:
-	arm,hbi = <0xhbi>
-  eg:
-  - for Coretile Express A5x2 (V2P-CA5s) HBI-0191:
-	arm,hbi = <0x191>;
-  - Coretile Express A9x4 (V2P-CA9) HBI-0225:
-	arm,hbi = <0x225>;
-
-
-CPU nodes
----------
-
-Top-level standard "cpus" node is required. It must contain a node
-with device_type = "cpu" property for every available core, eg.:
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a5";
-			reg = <0>;
-		};
-	};
-
-
-Configuration infrastructure
-----------------------------
-
-The platform has an elaborated configuration system, consisting of
-microcontrollers residing on the mother- and daughterboards known
-as Motherboard/Daughterboard Configuration Controller (MCC and DCC).
-The controllers are responsible for the platform initialization
-(reset generation, flash programming, FPGA bitfiles loading etc.)
-but also control clock generators, voltage regulators, gather
-environmental data like temperature, power consumption etc. Even
-the video output switch (FPGA) is controlled that way.
-
-The controllers are not mapped into normal memory address space
-and must be accessed through bridges - other devices capable
-of generating transactions on the configuration bus.
-
-The nodes describing configuration controllers must define
-the following properties:
-- compatible value:
-	compatible = "arm,vexpress,config-bus";
-- bridge phandle:
-	arm,vexpress,config-bridge = <phandle>;
-and children describing available functions.
-
-
-Platform topology
------------------
-
-As Versatile Express can be configured in number of physically
-different setups, the device tree should describe platform topology.
-Root node and main motherboard node must define the following
-property, describing physical location of the children nodes:
-- site number:
-	arm,vexpress,site = <number>;
-  where 0 means motherboard, 1 or 2 are daugtherboard sites,
-  0xf means "master" site (site containing main CPU tile)
-- when daughterboards are stacked on one site, their position
-  in the stack be be described with:
-	arm,vexpress,position = <number>;
-- when describing tiles consisting more than one DCC, its number
-  can be described with:
-	arm,vexpress,dcc = <number>;
-
-Any of the numbers above defaults to zero if not defined in
-the node or any of its parent.
-
-
-Motherboard
------------
-
-The motherboard description file provides a single "motherboard" node
-using 2 address cells corresponding to the Static Memory Bus used
-between the motherboard and the tile. The first cell defines the Chip
-Select (CS) line number, the second cell address offset within the CS.
-All interrupt lines between the motherboard and the tile are active
-high and are described using single cell.
-
-Optional properties of the "motherboard" node:
-- motherboard's memory map variant:
-	arm,v2m-memory-map = "<name>";
-  where name is one of:
-  - "rs1" - for RS1 map (i.a. peripherals on CS3); this map is also
-            referred to as "ARM Cortex-A Series memory map":
-	arm,v2m-memory-map = "rs1";
-  When this property is missing, the motherboard is using the original
-  memory map (also known as the "Legacy memory map", primarily used
-  with the original CoreTile Express A9x4) with peripherals on CS7.
-
-Motherboard .dtsi files provide a set of labelled peripherals that
-can be used to obtain required phandle in the tile's "aliases" node:
-- UARTs, note that the numbers correspond to the physical connectors
-  on the motherboard's back panel:
-	v2m_serial0, v2m_serial1, v2m_serial2 and v2m_serial3
-- I2C controllers:
-	v2m_i2c_dvi and v2m_i2c_pcie
-- SP804 timers:
-	v2m_timer01 and v2m_timer23
-
-The tile description should define a "smb" node, describing the
-Static Memory Bus between the tile and motherboard. It must define
-the following properties:
-- "simple-bus" compatible value (to ensure creation of the children)
-	compatible = "simple-bus";
-- mapping of the SMB CS/offset addresses into main address space:
-	#address-cells = <2>;
-	#size-cells = <1>;
-	ranges = <...>;
-- interrupts mapping:
-	#interrupt-cells = <1>;
-	interrupt-map-mask = <0 0 63>;
-	interrupt-map = <...>;
-
-
-Example of a VE tile description (simplified)
----------------------------------------------
-
-/dts-v1/;
-
-/ {
-	model = "V2P-CA5s";
-	arm,hbi = <0x225>;
-	arm,vexpress,site = <0xf>;
-	compatible = "arm,vexpress-v2p-ca5s", "arm,vexpress";
-	interrupt-parent = <&gic>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	chosen { };
-
-	aliases {
-		serial0 = &v2m_serial0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a5";
-			reg = <0>;
-		};
-	};
-
-	gic: interrupt-controller@2c001000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0x2c001000 0x1000>,
-		      <0x2c000100 0x100>;
-	};
-
-	dcc {
-		compatible = "arm,vexpress,config-bus";
-		arm,vexpress,config-bridge = <&v2m_sysreg>;
-
-		osc@0 {
-			compatible = "arm,vexpress-osc";
-		};
-	};
-
-	smb {
-		compatible = "simple-bus";
-
-		#address-cells = <2>;
-		#size-cells = <1>;
-		/* CS0 is visible at 0x08000000 */
-		ranges = <0 0 0x08000000 0x04000000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 63>;
-		/* Active high IRQ 0 is connected to GIC's SPI0 */
-		interrupt-map = <0 0 0 &gic 0 0 4>;
-
-		/include/ "vexpress-v2m-rs1.dtsi"
-	};
-};
-
diff --git a/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml b/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml
new file mode 100644
index 0000000..7b69831
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/ata/renesas,rcar-sata.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas R-Car Serial-ATA Interface
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,sata-r8a7779      # R-Car H1
+      - items:
+          - enum:
+              - renesas,sata-r8a7790-es1  # R-Car H2 ES1
+              - renesas,sata-r8a7790      # R-Car H2 other than ES1
+              - renesas,sata-r8a7791      # R-Car M2-W
+              - renesas,sata-r8a7793      # R-Car M2-N
+          - const: renesas,rcar-gen2-sata # generic R-Car Gen2
+      - items:
+          - enum:
+              - renesas,sata-r8a774b1     # RZ/G2N
+              - renesas,sata-r8a7795      # R-Car H3
+              - renesas,sata-r8a77965     # R-Car M3-N
+          - const: renesas,rcar-gen3-sata # generic R-Car Gen3 or RZ/G2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7791-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7791-sysc.h>
+
+    sata@ee300000 {
+            compatible = "renesas,sata-r8a7791", "renesas,rcar-gen2-sata";
+            reg = <0xee300000 0x200000>;
+            interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 815>;
+            power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+            resets = <&cpg 815>;
+    };
diff --git a/Documentation/devicetree/bindings/ata/sata_rcar.txt b/Documentation/devicetree/bindings/ata/sata_rcar.txt
deleted file mode 100644
index a2fbdc9..0000000
--- a/Documentation/devicetree/bindings/ata/sata_rcar.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-* Renesas R-Car SATA
-
-Required properties:
-- compatible		: should contain one or more of the following:
-			  - "renesas,sata-r8a774b1" for RZ/G2N
-			  - "renesas,sata-r8a7779" for R-Car H1
-			  - "renesas,sata-r8a7790-es1" for R-Car H2 ES1
-			  - "renesas,sata-r8a7790" for R-Car H2 other than ES1
-			  - "renesas,sata-r8a7791" for R-Car M2-W
-			  - "renesas,sata-r8a7793" for R-Car M2-N
-			  - "renesas,sata-r8a7795" for R-Car H3
-			  - "renesas,sata-r8a77965" for R-Car M3-N
-			  - "renesas,rcar-gen2-sata" for a generic R-Car Gen2
-			     compatible device
-			  - "renesas,rcar-gen3-sata" for a generic R-Car Gen3 or
-			     RZ/G2 compatible device
-			  - "renesas,rcar-sata" is deprecated
-
-			  When compatible with the generic version nodes
-			  must list the SoC-specific version corresponding
-			  to the platform first followed by the generic
-			  version.
-
-- reg			: address and length of the SATA registers;
-- interrupts		: must consist of one interrupt specifier.
-- clocks		: must contain a reference to the functional clock.
-
-Example:
-
-sata0: sata@ee300000 {
-	compatible = "renesas,sata-r8a7791", "renesas,rcar-gen2-sata";
-	reg = <0 0xee300000 0 0x2000>;
-	interrupt-parent = <&gic>;
-	interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&mstp8_clks R8A7791_CLK_SATA0>;
-};
diff --git a/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml b/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml
new file mode 100644
index 0000000..c4c9119
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/socionext,uniphier-system-bus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier System Bus
+
+description: |
+  The UniPhier System Bus is an external bus that connects on-board devices to
+  the UniPhier SoC. It is a simple (semi-)parallel bus with address, data, and
+  some control signals. It supports up to 8 banks (chip selects).
+
+  Before any access to the bus, the bus controller must be configured; the bus
+  controller registers provide the control for the translation from the offset
+  within each bank to the CPU-viewed address. The needed setup includes the
+  base address, the size of each bank. Optionally, some timing parameters can
+  be optimized for faster bus access.
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+properties:
+  compatible:
+    const: socionext,uniphier-system-bus
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    description: |
+      The first cell is the bank number (chip select).
+      The second cell is the address offset within the bank.
+    const: 2
+
+  "#size-cells":
+    const: 1
+
+  ranges:
+    description: |
+      Provide address translation from the System Bus to the parent bus.
+
+      Note:
+      The address region(s) that can be assigned for the System Bus is
+      implementation defined. Some SoCs can use 0x00000000-0x0fffffff and
+      0x40000000-0x4fffffff, while other SoCs only 0x40000000-0x4fffffff.
+      There might be additional limitations depending on SoCs and the boot mode.
+      The address translation is arbitrary as long as the banks are assigned in
+      the supported address space with the required alignment and they do not
+      overlap one another.
+
+      For example, it is possible to map:
+        bank 0 to 0x42000000-0x43ffffff, bank 5 to 0x46000000-0x46ffffff
+      It is also possible to map:
+        bank 0 to 0x48000000-0x49ffffff, bank 5 to 0x44000000-0x44ffffff
+      There is no reason to stick to a particular translation mapping, but the
+      "ranges" property should provide a "reasonable" default that is known to
+      work. The software should initialize the bus controller according to it.
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+examples:
+  - |
+    // In this example,
+    // - the Ethernet device is connected at the offset 0x01f00000 of CS1 and
+    //   mapped to 0x43f00000 of the parent bus.
+    // - the UART device is connected at the offset 0x00200000 of CS5 and
+    //   mapped to 0x46200000 of the parent bus.
+
+    system-bus@58c00000 {
+        compatible = "socionext,uniphier-system-bus";
+        reg = <0x58c00000 0x400>;
+        #address-cells = <2>;
+        #size-cells = <1>;
+        ranges = <1 0x00000000 0x42000000 0x02000000>,
+                 <5 0x00000000 0x46000000 0x01000000>;
+
+        ethernet@1,01f00000 {
+            compatible = "smsc,lan9115";
+            reg = <1 0x01f00000 0x1000>;
+            interrupts = <0 48 4>;
+            phy-mode = "mii";
+        };
+
+        uart@5,00200000 {
+            compatible = "ns16550a";
+            reg = <5 0x00200000 0x20>;
+            interrupts = <0 49 4>;
+            clock-frequency = <12288000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/bus/ti-sysc.txt b/Documentation/devicetree/bindings/bus/ti-sysc.txt
index 233eb82..c984143 100644
--- a/Documentation/devicetree/bindings/bus/ti-sysc.txt
+++ b/Documentation/devicetree/bindings/bus/ti-sysc.txt
@@ -38,6 +38,7 @@
 		"ti,sysc-dra7-mcasp"
 		"ti,sysc-usb-host-fs"
 		"ti,sysc-dra7-mcan"
+		"ti,sysc-pruss"
 
 - reg		shall have register areas implemented for the interconnect
 		target module in question such as revision, sysc and syss
diff --git a/Documentation/devicetree/bindings/bus/uniphier-system-bus.txt b/Documentation/devicetree/bindings/bus/uniphier-system-bus.txt
deleted file mode 100644
index 68ef80a..0000000
--- a/Documentation/devicetree/bindings/bus/uniphier-system-bus.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-UniPhier System Bus
-
-The UniPhier System Bus is an external bus that connects on-board devices to
-the UniPhier SoC.  It is a simple (semi-)parallel bus with address, data, and
-some control signals.  It supports up to 8 banks (chip selects).
-
-Before any access to the bus, the bus controller must be configured; the bus
-controller registers provide the control for the translation from the offset
-within each bank to the CPU-viewed address.  The needed setup includes the base
-address, the size of each bank.  Optionally, some timing parameters can be
-optimized for faster bus access.
-
-Required properties:
-- compatible: should be "socionext,uniphier-system-bus".
-- reg: offset and length of the register set for the bus controller device.
-- #address-cells: should be 2.  The first cell is the bank number (chip select).
-  The second cell is the address offset within the bank.
-- #size-cells: should be 1.
-- ranges: should provide a proper address translation from the System Bus to
-  the parent bus.
-
-Note:
-The address region(s) that can be assigned for the System Bus is implementation
-defined.  Some SoCs can use 0x00000000-0x0fffffff and 0x40000000-0x4fffffff,
-while other SoCs can only use 0x40000000-0x4fffffff.  There might be additional
-limitations depending on SoCs and the boot mode.  The address translation is
-arbitrary as long as the banks are assigned in the supported address space with
-the required alignment and they do not overlap one another.
-For example, it is possible to map:
-  bank 0 to 0x42000000-0x43ffffff, bank 5 to 0x46000000-0x46ffffff
-It is also possible to map:
-  bank 0 to 0x48000000-0x49ffffff, bank 5 to 0x44000000-0x44ffffff
-There is no reason to stick to a particular translation mapping, but the
-"ranges" property should provide a "reasonable" default that is known to work.
-The software should initialize the bus controller according to it.
-
-Example:
-
-	system-bus {
-		compatible = "socionext,uniphier-system-bus";
-		reg = <0x58c00000 0x400>;
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <1 0x00000000 0x42000000 0x02000000
-			  5 0x00000000 0x46000000 0x01000000>;
-
-		ethernet@1,01f00000 {
-			compatible = "smsc,lan9115";
-			reg = <1 0x01f00000 0x1000>;
-			interrupts = <0 48 4>
-			phy-mode = "mii";
-		};
-
-		uart@5,00200000 {
-			compatible = "ns16550a";
-			reg = <5 0x00200000 0x20>;
-			interrupts = <0 49 4>
-			clock-frequency = <12288000>;
-		};
-	};
-
-In this example,
- - the Ethernet device is connected at the offset 0x01f00000 of CS1 and
-   mapped to 0x43f00000 of the parent bus.
- - the UART device is connected at the offset 0x00200000 of CS5 and
-   mapped to 0x46200000 of the parent bus.
diff --git a/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml b/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml
new file mode 100644
index 0000000..6d7396a
--- /dev/null
+++ b/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/chrome/google,cros-ec-typec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Google Chrome OS EC(Embedded Controller) Type C port driver.
+
+maintainers:
+  - Benson Leung <bleung@chromium.org>
+  - Prashant Malani <pmalani@chromium.org>
+
+description:
+  Chrome OS devices have an Embedded Controller(EC) which has access to
+  Type C port state. This node is intended to allow the host to read and
+  control the Type C ports. The node for this device should be under a
+  cros-ec node like google,cros-ec-spi.
+
+properties:
+  compatible:
+    const: google,cros-ec-typec
+
+  connector:
+    $ref: /schemas/connector/usb-connector.yaml#
+
+required:
+  - compatible
+
+examples:
+  - |+
+    spi0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      cros_ec: ec@0 {
+        compatible = "google,cros-ec-spi";
+        reg = <0>;
+
+        typec {
+          compatible = "google,cros-ec-typec";
+
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          connector@0 {
+            compatible = "usb-c-connector";
+            reg = <0>;
+            power-role = "dual";
+            data-role = "dual";
+            try-power-role = "source";
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml b/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml
new file mode 100644
index 0000000..444aeea
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/arm,syscon-icst.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM System Controller ICST Clocks
+
+maintainers:
+  - Linus Walleij <linusw@kernel.org>
+
+description: |
+  The ICS525 and ICS307 oscillators are produced by Integrated
+  Devices Technology (IDT). ARM integrated these oscillators deeply into their
+  reference designs by adding special control registers that manage such
+  oscillators to their system controllers.
+
+  The various ARM system controllers contain logic to serialize and initialize
+  an ICST clock request after a write to the 32 bit register at an offset
+  into the system controller. Furthermore, to even be able to alter one of
+  these frequencies, the system controller must first be unlocked by
+  writing a special token to another offset in the system controller.
+
+  Some ARM hardware contain special versions of the serial interface that only
+  connects the low 8 bits of the VDW (missing one bit), hard-wires RDW to
+  different values and sometimes also hard-wires the output divider. They
+  therefore have special compatible strings as per this table (the OD value is
+  the value on the pins, not the resulting output divider).
+
+  In the core modules and logic tiles, the ICST is a configurable clock fed
+  from a 24 MHz clock on the motherboard (usually the main crystal) used for
+  generating e.g. video clocks. It is located on the core module and there is
+  only one of these. This clock node must be a subnode of the core module.
+
+  Hardware variant         RDW     OD          VDW
+
+  Integrator/AP            22      1           Bit 8 0, rest variable
+  integratorap-cm
+
+  Integrator/AP            46      3           Bit 8 0, rest variable
+  integratorap-sys
+
+  Integrator/AP            22 or   1           17 or (33 or 25 MHz)
+  integratorap-pci         14      1           14
+
+  Integrator/CP            22      variable    Bit 8 0, rest variable
+  integratorcp-cm-core
+
+  Integrator/CP            22      variable    Bit 8 0, rest variable
+  integratorcp-cm-mem
+
+  The ICST oscillator must be provided inside a system controller node.
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    enum:
+      - arm,syscon-icst525
+      - arm,syscon-icst307
+      - arm,syscon-icst525-integratorap-cm
+      - arm,syscon-icst525-integratorap-sys
+      - arm,syscon-icst525-integratorap-pci
+      - arm,syscon-icst525-integratorcp-cm-core
+      - arm,syscon-icst525-integratorcp-cm-mem
+      - arm,integrator-cm-auxosc
+      - arm,versatile-cm-auxosc
+      - arm,impd-vco1
+      - arm,impd-vco2
+
+  clocks:
+    description: Parent clock for the ICST VCO
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 1
+
+  lock-offset:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: Offset to the unlocking register for the oscillator
+
+  vco-offset:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: Offset to the VCO register for the oscillator
+
+required:
+  - "#clock-cells"
+  - compatible
+  - clocks
+
+examples:
+  - |
+    vco1: clock {
+      compatible = "arm,impd1-vco1";
+      #clock-cells = <0>;
+      lock-offset = <0x08>;
+      vco-offset = <0x00>;
+      clocks = <&sysclk>;
+      clock-output-names = "IM-PD1-VCO1";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/arm-integrator.txt b/Documentation/devicetree/bindings/clock/arm-integrator.txt
deleted file mode 100644
index 11f5f95..0000000
--- a/Documentation/devicetree/bindings/clock/arm-integrator.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-Clock bindings for ARM Integrator and Versatile Core Module clocks
-
-Auxiliary Oscillator Clock
-
-This is a configurable clock fed from a 24 MHz chrystal,
-used for generating e.g. video clocks. It is located on the
-core module and there is only one of these.
-
-This clock node *must* be a subnode of the core module, since
-it obtains the base address for it's address range from its
-parent node.
-
-
-Required properties:
-- compatible: must be "arm,integrator-cm-auxosc" or "arm,versatile-cm-auxosc"
-- #clock-cells: must be <0>
-
-Optional properties:
-- clocks: parent clock(s)
-
-Example:
-
-core-module@10000000 {
-	xtal24mhz: xtal24mhz@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-	};
-	auxosc: cm_aux_osc@25M {
-		#clock-cells = <0>;
-		compatible = "arm,integrator-cm-auxosc";
-		clocks = <&xtal24mhz>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt b/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt
deleted file mode 100644
index 4cd8174..0000000
--- a/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt
+++ /dev/null
@@ -1,70 +0,0 @@
-ARM System Controller ICST clocks
-
-The ICS525 and ICS307 oscillators are produced by Integrated Devices
-Technology (IDT). ARM integrated these oscillators deeply into their
-reference designs by adding special control registers that manage such
-oscillators to their system controllers.
-
-The various ARM system controllers contain logic to serialize and initialize
-an ICST clock request after a write to the 32 bit register at an offset
-into the system controller. Furthermore, to even be able to alter one of
-these frequencies, the system controller must first be unlocked by
-writing a special token to another offset in the system controller.
-
-Some ARM hardware contain special versions of the serial interface that only
-connects the low 8 bits of the VDW (missing one bit), hardwires RDW to
-different values and sometimes also hardwire the output divider. They
-therefore have special compatible strings as per this table (the OD value is
-the value on the pins, not the resulting output divider):
-
-Hardware variant:        RDW     OD          VDW
-
-Integrator/AP            22      1           Bit 8 0, rest variable
-integratorap-cm
-
-Integrator/AP            46      3           Bit 8 0, rest variable
-integratorap-sys
-
-Integrator/AP            22 or   1           17 or (33 or 25 MHz)
-integratorap-pci         14      1           14
-
-Integrator/CP            22      variable    Bit 8 0, rest variable
-integratorcp-cm-core
-
-Integrator/CP            22      variable    Bit 8 0, rest variable
-integratorcp-cm-mem
-
-The ICST oscillator must be provided inside a system controller node.
-
-Required properties:
-- compatible: must be one of
-  "arm,syscon-icst525"
-  "arm,syscon-icst307"
-  "arm,syscon-icst525-integratorap-cm"
-  "arm,syscon-icst525-integratorap-sys"
-  "arm,syscon-icst525-integratorap-pci"
-  "arm,syscon-icst525-integratorcp-cm-core"
-  "arm,syscon-icst525-integratorcp-cm-mem"
-- lock-offset: the offset address into the system controller where the
-  unlocking register is located
-- vco-offset: the offset address into the system controller where the
-  ICST control register is located (even 32 bit address)
-- #clock-cells: must be <0>
-- clocks: parent clock, since the ICST needs a parent clock to derive its
-  frequency from, this attribute is compulsory.
-
-Example:
-
-syscon: syscon@10000000 {
-	compatible = "syscon";
-	reg = <0x10000000 0x1000>;
-
-	oscclk0: osc0@c {
-		compatible = "arm,syscon-icst307";
-		#clock-cells = <0>;
-		lock-offset = <0x20>;
-		vco-offset = <0x0c>;
-		clocks = <&xtal24mhz>;
-	};
-	(...)
-};
diff --git a/Documentation/devicetree/bindings/clock/clock-bindings.txt b/Documentation/devicetree/bindings/clock/clock-bindings.txt
index b646bbc..8a55fdc 100644
--- a/Documentation/devicetree/bindings/clock/clock-bindings.txt
+++ b/Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -94,7 +94,7 @@
     /* external oscillator */
     osc: oscillator {
         compatible = "fixed-clock";
-        #clock-cells = <1>;
+        #clock-cells = <0>;
         clock-frequency  = <32678>;
         clock-output-names = "osc";
     };
diff --git a/Documentation/devicetree/bindings/clock/fsl,plldig.yaml b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
index c835003..a203d5d 100644
--- a/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
+++ b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
@@ -21,6 +21,9 @@
   reg:
     maxItems: 1
 
+  clocks:
+    maxItems: 1
+
   '#clock-cells':
     const: 0
 
@@ -41,6 +44,8 @@
   - clocks
   - '#clock-cells'
 
+additionalProperties: false
+
 examples:
   # Display PIXEL Clock node:
   - |
diff --git a/Documentation/devicetree/bindings/clock/imx8mm-clock.txt b/Documentation/devicetree/bindings/clock/imx8mm-clock.txt
deleted file mode 100644
index 8e4ab9e..0000000
--- a/Documentation/devicetree/bindings/clock/imx8mm-clock.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-* Clock bindings for NXP i.MX8M Mini
-
-Required properties:
-- compatible: Should be "fsl,imx8mm-ccm"
-- reg: Address and length of the register set
-- #clock-cells: Should be <1>
-- clocks: list of clock specifiers, must contain an entry for each required
-          entry in clock-names
-- clock-names: should include the following entries:
-    - "osc_32k"
-    - "osc_24m"
-    - "clk_ext1"
-    - "clk_ext2"
-    - "clk_ext3"
-    - "clk_ext4"
-
-clk: clock-controller@30380000 {
-	compatible = "fsl,imx8mm-ccm";
-	reg = <0x0 0x30380000 0x0 0x10000>;
-	#clock-cells = <1>;
-	clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
-		 <&clk_ext3>, <&clk_ext4>;
-	clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
-		      "clk_ext3", "clk_ext4";
-};
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mm-clock.h
-for the full list of i.MX8M Mini clock IDs.
diff --git a/Documentation/devicetree/bindings/clock/imx8mm-clock.yaml b/Documentation/devicetree/bindings/clock/imx8mm-clock.yaml
new file mode 100644
index 0000000..ec830db
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx8mm-clock.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx8mm-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8M Mini Clock Control Module Binding
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+description: |
+  NXP i.MX8M Mini clock control module is an integrated clock controller, which
+  generates and supplies to all modules.
+
+properties:
+  compatible:
+    const: fsl,imx8mm-ccm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: 32k osc
+      - description: 24m osc
+      - description: ext1 clock input
+      - description: ext2 clock input
+      - description: ext3 clock input
+      - description: ext4 clock input
+
+  clock-names:
+    items:
+      - const: osc_32k
+      - const: osc_24m
+      - const: clk_ext1
+      - const: clk_ext2
+      - const: clk_ext3
+      - const: clk_ext4
+
+  '#clock-cells':
+    const: 1
+    description:
+      The clock consumer should specify the desired clock by having the clock
+      ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mm-clock.h
+      for the full list of i.MX8M Mini clock IDs.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+examples:
+  # Clock Control Module node:
+  - |
+    clk: clock-controller@30380000 {
+        compatible = "fsl,imx8mm-ccm";
+        reg = <0x30380000 0x10000>;
+        #clock-cells = <1>;
+        clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
+                 <&clk_ext3>, <&clk_ext4>;
+        clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
+                      "clk_ext3", "clk_ext4";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml b/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml
index cd0b8a3..bdaa296 100644
--- a/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml
@@ -40,7 +40,7 @@
 
   '#clock-cells':
     const: 1
-    description: |
+    description:
       The clock consumer should specify the desired clock by having the clock
       ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mn-clock.h
       for the full list of i.MX8M Nano clock IDs.
@@ -52,12 +52,14 @@
   - clock-names
   - '#clock-cells'
 
+additionalProperties: false
+
 examples:
   # Clock Control Module node:
   - |
     clk: clock-controller@30380000 {
         compatible = "fsl,imx8mn-ccm";
-        reg = <0x0 0x30380000 0x0 0x10000>;
+        reg = <0x30380000 0x10000>;
         #clock-cells = <1>;
         clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>,
                  <&clk_ext2>, <&clk_ext3>, <&clk_ext4>;
@@ -65,48 +67,4 @@
                       "clk_ext2", "clk_ext3", "clk_ext4";
     };
 
-  # Required external clocks for Clock Control Module node:
-  - |
-    osc_32k: clock-osc-32k {
-        compatible = "fixed-clock";
-        #clock-cells = <0>;
-        clock-frequency = <32768>;
-        clock-output-names = "osc_32k";
-    };
-
-    osc_24m: clock-osc-24m {
-        compatible = "fixed-clock";
-        #clock-cells = <0>;
-        clock-frequency = <24000000>;
-        clock-output-names = "osc_24m";
-    };
-
-    clk_ext1: clock-ext1 {
-        compatible = "fixed-clock";
-        #clock-cells = <0>;
-        clock-frequency = <133000000>;
-        clock-output-names = "clk_ext1";
-    };
-
-    clk_ext2: clock-ext2 {
-        compatible = "fixed-clock";
-        #clock-cells = <0>;
-        clock-frequency = <133000000>;
-        clock-output-names = "clk_ext2";
-    };
-
-    clk_ext3: clock-ext3 {
-        compatible = "fixed-clock";
-        #clock-cells = <0>;
-        clock-frequency = <133000000>;
-        clock-output-names = "clk_ext3";
-    };
-
-    clk_ext4: clock-ext4 {
-        compatible = "fixed-clock";
-        #clock-cells = <0>;
-        clock-frequency= <133000000>;
-        clock-output-names = "clk_ext4";
-    };
-
 ...
diff --git a/Documentation/devicetree/bindings/clock/imx8mp-clock.yaml b/Documentation/devicetree/bindings/clock/imx8mp-clock.yaml
index 89aee63..4351a1d 100644
--- a/Documentation/devicetree/bindings/clock/imx8mp-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx8mp-clock.yaml
@@ -52,6 +52,8 @@
   - clock-names
   - '#clock-cells'
 
+additionalProperties: false
+
 examples:
   # Clock Control Module node:
   - |
diff --git a/Documentation/devicetree/bindings/clock/imx8mq-clock.txt b/Documentation/devicetree/bindings/clock/imx8mq-clock.txt
deleted file mode 100644
index 52de826..0000000
--- a/Documentation/devicetree/bindings/clock/imx8mq-clock.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-* Clock bindings for NXP i.MX8M Quad
-
-Required properties:
-- compatible: Should be "fsl,imx8mq-ccm"
-- reg: Address and length of the register set
-- #clock-cells: Should be <1>
-- clocks: list of clock specifiers, must contain an entry for each required
-          entry in clock-names
-- clock-names: should include the following entries:
-    - "ckil"
-    - "osc_25m"
-    - "osc_27m"
-    - "clk_ext1"
-    - "clk_ext2"
-    - "clk_ext3"
-    - "clk_ext4"
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.  See include/dt-bindings/clock/imx8mq-clock.h
-for the full list of i.MX8M Quad clock IDs.
diff --git a/Documentation/devicetree/bindings/clock/imx8mq-clock.yaml b/Documentation/devicetree/bindings/clock/imx8mq-clock.yaml
new file mode 100644
index 0000000..05d7d14
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx8mq-clock.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx8mq-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8M Quad Clock Control Module Binding
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+description: |
+  NXP i.MX8M Quad clock control module is an integrated clock controller, which
+  generates and supplies to all modules.
+
+properties:
+  compatible:
+    const: fsl,imx8mq-ccm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: 32k osc
+      - description: 25m osc
+      - description: 27m osc
+      - description: ext1 clock input
+      - description: ext2 clock input
+      - description: ext3 clock input
+      - description: ext4 clock input
+
+  clock-names:
+    items:
+      - const: ckil
+      - const: osc_25m
+      - const: osc_27m
+      - const: clk_ext1
+      - const: clk_ext2
+      - const: clk_ext3
+      - const: clk_ext4
+
+  '#clock-cells':
+    const: 1
+    description:
+      The clock consumer should specify the desired clock by having the clock
+      ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mq-clock.h
+      for the full list of i.MX8M Quad clock IDs.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+examples:
+  # Clock Control Module node:
+  - |
+    clk: clock-controller@30380000 {
+        compatible = "fsl,imx8mq-ccm";
+        reg = <0x30380000 0x10000>;
+        #clock-cells = <1>;
+        clocks = <&ckil>, <&osc_25m>, <&osc_27m>,
+                 <&clk_ext1>, <&clk_ext2>,
+                 <&clk_ext3>, <&clk_ext4>;
+        clock-names = "ckil", "osc_25m", "osc_27m",
+                      "clk_ext1", "clk_ext2",
+                      "clk_ext3", "clk_ext4";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/marvell,mmp2-clock.yaml b/Documentation/devicetree/bindings/clock/marvell,mmp2-clock.yaml
new file mode 100644
index 0000000..e2b6ac9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell,mmp2-clock.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/marvell,mmp2-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MMP2 and MMP3 Clock Controller
+
+maintainers:
+  - Lubomir Rintel <lkundrak@v3.sk>
+
+description: |
+  The clock subsystem on MMP2 or MMP3 generates and supplies clock to various
+  controllers within the SoC.
+
+  Each clock is assigned an identifier and client nodes use this identifier
+  to specify the clock which they consume.
+
+  All these identifiers could be found in <dt-bindings/clock/marvell,mmp2.h>.
+
+properties:
+  compatible:
+    enum:
+      - marvell,mmp2-clock # controller compatible with MMP2 SoC
+      - marvell,mmp3-clock # controller compatible with MMP3 SoC
+
+  reg:
+    items:
+      - description: MPMU register region
+      - description: APMU register region
+      - description: APBC register region
+
+  reg-names:
+    items:
+      - const: mpmu
+      - const: apmu
+      - const: apbc
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@d4050000 {
+      compatible = "marvell,mmp2-clock";
+      reg = <0xd4050000 0x1000>,
+            <0xd4282800 0x400>,
+            <0xd4015000 0x1000>;
+      reg-names = "mpmu", "apmu", "apbc";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/marvell,mmp2.txt b/Documentation/devicetree/bindings/clock/marvell,mmp2.txt
deleted file mode 100644
index 23b52dc..0000000
--- a/Documentation/devicetree/bindings/clock/marvell,mmp2.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-* Marvell MMP2 Clock Controller
-
-The MMP2 clock subsystem generates and supplies clock to various
-controllers within the MMP2 SoC.
-
-Required Properties:
-
-- compatible: should be one of the following.
-  - "marvell,mmp2-clock" - controller compatible with MMP2 SoC.
-
-- reg: physical base address of the clock subsystem and length of memory mapped
-  region. There are 3 places in SOC has clock control logic:
-  "mpmu", "apmu", "apbc". So three reg spaces need to be defined.
-
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Each clock is assigned an identifier and client nodes use this identifier
-to specify the clock which they consume.
-
-All these identifiers could be found in <dt-bindings/clock/marvell,mmp2.h>.
diff --git a/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml b/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml
index f0b804a7..0e8b077 100644
--- a/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml
@@ -35,6 +35,8 @@
   - clocks
   - '#clock-cells'
 
+additionalProperties: false
+
 examples:
   # Clock controller node:
   - |
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
index 3647007..eacccc8 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
@@ -68,6 +68,8 @@
   - nvmem-cell-names
   - '#thermal-sensor-cells'
 
+additionalProperties: false
+
 examples:
   - |
     clock-controller@900000 {
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml
index 89c6e07..98572b4 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml
@@ -40,6 +40,8 @@
   - '#clock-cells'
   - '#reset-cells'
 
+additionalProperties: false
+
 examples:
   - |
     clock-controller@1800000 {
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
index 18e4e77..5a5b221 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
@@ -56,6 +56,8 @@
   - '#reset-cells'
   - '#power-domain-cells'
 
+additionalProperties: false
+
 examples:
   - |
     clock-controller@300000 {
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml
index 1d3cae9..a0bb713 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml
@@ -66,6 +66,8 @@
   - '#reset-cells'
   - '#power-domain-cells'
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,rpmcc.h>
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml
index 8cdece3..ce06f3f 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml
@@ -40,6 +40,8 @@
   - '#clock-cells'
   - '#reset-cells'
 
+additionalProperties: false
+
 examples:
   - |
     clock-controller@1800000 {
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
index ee4f968..a345320 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
@@ -58,6 +58,8 @@
   - '#reset-cells'
   - '#power-domain-cells'
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,rpmh.h>
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml
index 888e9a7..36f3b36 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml
@@ -56,6 +56,8 @@
   - '#reset-cells'
   - '#power-domain-cells'
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,rpmh.h>
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml
new file mode 100644
index 0000000..2c40a8a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sm8250.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for SM8250
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <tdas@codeaurora.org>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on SM8250.
+
+  See also:
+  - dt-bindings/clock/qcom,gcc-sm8250.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sm8250
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: sleep_clk
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  protected-clocks:
+    description:
+      Protected clock specifier list as per common clock binding.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sm8250";
+      reg = <0 0x00100000 0 0x1f0000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&sleep_clk>;
+      clock-names = "bi_tcxo", "sleep_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
index d18f8ab..e533bb0 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
@@ -74,6 +74,8 @@
   - '#reset-cells'
   - '#power-domain-cells'
 
+additionalProperties: false
+
 examples:
   # Example for GCC for MSM8960:
   - |
diff --git a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
index 8551849..f684fe6 100644
--- a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
@@ -74,6 +74,8 @@
   - '#reset-cells'
   - '#power-domain-cells'
 
+additionalProperties: false
+
 if:
   properties:
     compatible:
diff --git a/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml
index 7d853c1..d747bb5 100644
--- a/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml
@@ -50,6 +50,8 @@
   - '#reset-cells'
   - '#power-domain-cells'
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-msm8998.h>
diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
index 944719b..90a1349 100644
--- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
+++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
@@ -14,7 +14,9 @@
 			"qcom,rpmcc-apq8060", "qcom,rpmcc"
 			"qcom,rpmcc-msm8916", "qcom,rpmcc"
 			"qcom,rpmcc-msm8974", "qcom,rpmcc"
+			"qcom,rpmcc-msm8976", "qcom,rpmcc"
 			"qcom,rpmcc-apq8064", "qcom,rpmcc"
+			"qcom,rpmcc-ipq806x", "qcom,rpmcc"
 			"qcom,rpmcc-msm8996", "qcom,rpmcc"
 			"qcom,rpmcc-msm8998", "qcom,rpmcc"
 			"qcom,rpmcc-qcs404", "qcom,rpmcc"
diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
index 2cd158f..a46a3a7 100644
--- a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
@@ -20,6 +20,7 @@
       - qcom,sc7180-rpmh-clk
       - qcom,sdm845-rpmh-clk
       - qcom,sm8150-rpmh-clk
+      - qcom,sm8250-rpmh-clk
 
   clocks:
     maxItems: 1
@@ -35,6 +36,8 @@
   - compatible
   - '#clock-cells'
 
+additionalProperties: false
+
 examples:
   # Example for GCC for SDM845: The below node should be defined inside
   # &apps_rsc node.
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml
index 0429062..58cdfd59 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml
@@ -58,6 +58,8 @@
   - '#reset-cells'
   - '#power-domain-cells'
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-sc7180.h>
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml
index 5785192..8635e35 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml
@@ -52,6 +52,8 @@
   - '#reset-cells'
   - '#power-domain-cells'
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-sc7180.h>
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml
new file mode 100644
index 0000000..0dd5d25
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc7180-mss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Modem Clock Controller Binding for SC7180
+
+maintainers:
+  - Taniya Das <tdas@codeaurora.org>
+
+description: |
+  Qualcomm modem clock control module which supports the clocks on SC7180.
+
+  See also:
+  - dt-bindings/clock/qcom,mss-sc7180.h
+
+properties:
+  compatible:
+    const: qcom,sc7180-mss
+
+  clocks:
+    items:
+      - description: gcc_mss_mfab_axi clock from GCC
+      - description: gcc_mss_nav_axi clock from GCC
+      - description: gcc_mss_cfg_ahb clock from GCC
+
+  clock-names:
+    items:
+      - const: gcc_mss_mfab_axis
+      - const: gcc_mss_nav_axi
+      - const: cfg_ahb
+
+  '#clock-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    clock-controller@41a8000 {
+      compatible = "qcom,sc7180-mss";
+      reg = <0 0x041a8000 0 0x8000>;
+      clocks = <&gcc GCC_MSS_MFAB_AXIS_CLK>,
+               <&gcc GCC_MSS_NAV_AXI_CLK>,
+               <&gcc GCC_MSS_CFG_AHB_CLK>;
+      clock-names = "gcc_mss_mfab_axis",
+                    "gcc_mss_nav_axi",
+                    "cfg_ahb";
+      #clock-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml
index 31df901..0071b97 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml
@@ -48,6 +48,8 @@
   - '#reset-cells'
   - '#power-domain-cells'
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,rpmh.h>
diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml
index 89269dd..ad47d74 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml
@@ -67,6 +67,8 @@
   - '#reset-cells'
   - '#power-domain-cells'
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-sdm845.h>
diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml
index bac04f1..7a052ac 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml
@@ -52,6 +52,8 @@
   - '#reset-cells'
   - '#power-domain-cells'
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-sdm845.h>
diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml
index 9d216c0..2a6a81a 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml
@@ -48,6 +48,8 @@
   - '#reset-cells'
   - '#power-domain-cells'
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,rpmh.h>
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
deleted file mode 100644
index f4d153f..0000000
--- a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
+++ /dev/null
@@ -1,100 +0,0 @@
-* Renesas Clock Pulse Generator / Module Standby and Software Reset
-
-On Renesas ARM SoCs (SH/R-Mobile, R-Car, RZ), the CPG (Clock Pulse Generator)
-and MSSR (Module Standby and Software Reset) blocks are intimately connected,
-and share the same register block.
-
-They provide the following functionalities:
-  - The CPG block generates various core clocks,
-  - The MSSR block provides two functions:
-      1. Module Standby, providing a Clock Domain to control the clock supply
-	 to individual SoC devices,
-      2. Reset Control, to perform a software reset of individual SoC devices.
-
-Required Properties:
-  - compatible: Must be one of:
-      - "renesas,r7s9210-cpg-mssr" for the r7s9210 SoC (RZ/A2)
-      - "renesas,r8a7743-cpg-mssr" for the r8a7743 SoC (RZ/G1M)
-      - "renesas,r8a7744-cpg-mssr" for the r8a7744 SoC (RZ/G1N)
-      - "renesas,r8a7745-cpg-mssr" for the r8a7745 SoC (RZ/G1E)
-      - "renesas,r8a77470-cpg-mssr" for the r8a77470 SoC (RZ/G1C)
-      - "renesas,r8a774a1-cpg-mssr" for the r8a774a1 SoC (RZ/G2M)
-      - "renesas,r8a774b1-cpg-mssr" for the r8a774b1 SoC (RZ/G2N)
-      - "renesas,r8a774c0-cpg-mssr" for the r8a774c0 SoC (RZ/G2E)
-      - "renesas,r8a7790-cpg-mssr" for the r8a7790 SoC (R-Car H2)
-      - "renesas,r8a7791-cpg-mssr" for the r8a7791 SoC (R-Car M2-W)
-      - "renesas,r8a7792-cpg-mssr" for the r8a7792 SoC (R-Car V2H)
-      - "renesas,r8a7793-cpg-mssr" for the r8a7793 SoC (R-Car M2-N)
-      - "renesas,r8a7794-cpg-mssr" for the r8a7794 SoC (R-Car E2)
-      - "renesas,r8a7795-cpg-mssr" for the r8a7795 SoC (R-Car H3)
-      - "renesas,r8a7796-cpg-mssr" for the r8a77960 SoC (R-Car M3-W)
-      - "renesas,r8a77961-cpg-mssr" for the r8a77961 SoC (R-Car M3-W+)
-      - "renesas,r8a77965-cpg-mssr" for the r8a77965 SoC (R-Car M3-N)
-      - "renesas,r8a77970-cpg-mssr" for the r8a77970 SoC (R-Car V3M)
-      - "renesas,r8a77980-cpg-mssr" for the r8a77980 SoC (R-Car V3H)
-      - "renesas,r8a77990-cpg-mssr" for the r8a77990 SoC (R-Car E3)
-      - "renesas,r8a77995-cpg-mssr" for the r8a77995 SoC (R-Car D3)
-
-  - reg: Base address and length of the memory resource used by the CPG/MSSR
-    block
-
-  - clocks: References to external parent clocks, one entry for each entry in
-    clock-names
-  - clock-names: List of external parent clock names. Valid names are:
-      - "extal" (r7s9210, r8a7743, r8a7744, r8a7745, r8a77470, r8a774a1,
-		 r8a774b1, r8a774c0, r8a7790, r8a7791, r8a7792, r8a7793,
-		 r8a7794, r8a7795, r8a77960, r8a77961, r8a77965, r8a77970,
-		 r8a77980, r8a77990, r8a77995)
-      - "extalr" (r8a774a1, r8a774b1, r8a7795, r8a77960, r8a77961, r8a77965,
-		  r8a77970, r8a77980)
-      - "usb_extal" (r8a7743, r8a7744, r8a7745, r8a77470, r8a7790, r8a7791,
-		     r8a7793, r8a7794)
-
-  - #clock-cells: Must be 2
-      - For CPG core clocks, the two clock specifier cells must be "CPG_CORE"
-	and a core clock reference, as defined in
-	<dt-bindings/clock/*-cpg-mssr.h>.
-      - For module clocks, the two clock specifier cells must be "CPG_MOD" and
-	a module number, as defined in the datasheet.
-
-  - #power-domain-cells: Must be 0
-      - SoC devices that are part of the CPG/MSSR Clock Domain and can be
-	power-managed through Module Standby should refer to the CPG device
-	node in their "power-domains" property, as documented by the generic PM
-	Domain bindings in
-	Documentation/devicetree/bindings/power/power-domain.yaml.
-
-  - #reset-cells: Must be 1
-      - The single reset specifier cell must be the module number, as defined
-	in the datasheet.
-
-
-Examples
---------
-
-  - CPG device node:
-
-	cpg: clock-controller@e6150000 {
-		compatible = "renesas,r8a7795-cpg-mssr";
-		reg = <0 0xe6150000 0 0x1000>;
-		clocks = <&extal_clk>, <&extalr_clk>;
-		clock-names = "extal", "extalr";
-		#clock-cells = <2>;
-		#power-domain-cells = <0>;
-		#reset-cells = <1>;
-	};
-
-
-  - CPG/MSSR Clock Domain member device node:
-
-	scif2: serial@e6e88000 {
-		compatible = "renesas,scif-r8a7795", "renesas,scif";
-		reg = <0 0xe6e88000 0 64>;
-		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg CPG_MOD 310>;
-		clock-names = "fck";
-		dmas = <&dmac1 0x13>, <&dmac1 0x12>;
-		dma-names = "tx", "rx";
-		power-domains = <&cpg>;
-		resets = <&cpg 310>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml
new file mode 100644
index 0000000..9cd102e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/clock/renesas,cpg-mssr.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas Clock Pulse Generator / Module Standby and Software Reset
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description: |
+  On Renesas ARM SoCs (SH/R-Mobile, R-Car, RZ), the CPG (Clock Pulse Generator)
+  and MSSR (Module Standby and Software Reset) blocks are intimately connected,
+  and share the same register block.
+
+  They provide the following functionalities:
+    - The CPG block generates various core clocks,
+    - The MSSR block provides two functions:
+        1. Module Standby, providing a Clock Domain to control the clock supply
+           to individual SoC devices,
+        2. Reset Control, to perform a software reset of individual SoC devices.
+
+properties:
+  compatible:
+    enum:
+      - renesas,r7s9210-cpg-mssr  # RZ/A2
+      - renesas,r8a7743-cpg-mssr  # RZ/G1M
+      - renesas,r8a7744-cpg-mssr  # RZ/G1N
+      - renesas,r8a7745-cpg-mssr  # RZ/G1E
+      - renesas,r8a77470-cpg-mssr # RZ/G1C
+      - renesas,r8a774a1-cpg-mssr # RZ/G2M
+      - renesas,r8a774b1-cpg-mssr # RZ/G2N
+      - renesas,r8a774c0-cpg-mssr # RZ/G2E
+      - renesas,r8a7790-cpg-mssr  # R-Car H2
+      - renesas,r8a7791-cpg-mssr  # R-Car M2-W
+      - renesas,r8a7792-cpg-mssr  # R-Car V2H
+      - renesas,r8a7793-cpg-mssr  # R-Car M2-N
+      - renesas,r8a7794-cpg-mssr  # R-Car E2
+      - renesas,r8a7795-cpg-mssr  # R-Car H3
+      - renesas,r8a7796-cpg-mssr  # R-Car M3-W
+      - renesas,r8a77961-cpg-mssr # R-Car M3-W+
+      - renesas,r8a77965-cpg-mssr # R-Car M3-N
+      - renesas,r8a77970-cpg-mssr # R-Car V3M
+      - renesas,r8a77980-cpg-mssr # R-Car V3H
+      - renesas,r8a77990-cpg-mssr # R-Car E3
+      - renesas,r8a77995-cpg-mssr # R-Car D3
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - extal     # All
+        - extalr    # Most R-Car Gen3 and RZ/G2
+        - usb_extal # Most R-Car Gen2 and RZ/G1
+
+  '#clock-cells':
+    description: |
+      - For CPG core clocks, the two clock specifier cells must be "CPG_CORE"
+        and a core clock reference, as defined in
+        <dt-bindings/clock/*-cpg-mssr.h>
+      - For module clocks, the two clock specifier cells must be "CPG_MOD" and
+        a module number, as defined in the datasheet.
+    const: 2
+
+  '#power-domain-cells':
+    description:
+      SoC devices that are part of the CPG/MSSR Clock Domain and can be
+      power-managed through Module Standby should refer to the CPG device node
+      in their "power-domains" property, as documented by the generic PM Domain
+      bindings in Documentation/devicetree/bindings/power/power-domain.yaml.
+    const: 0
+
+  '#reset-cells':
+    description:
+      The single reset specifier cell must be the module number, as defined in
+      the datasheet.
+    const: 1
+
+if:
+  not:
+    properties:
+      compatible:
+        items:
+          enum:
+            - renesas,r7s9210-cpg-mssr
+then:
+  required:
+    - '#reset-cells'
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    cpg: clock-controller@e6150000 {
+            compatible = "renesas,r8a7795-cpg-mssr";
+            reg = <0xe6150000 0x1000>;
+            clocks = <&extal_clk>, <&extalr_clk>;
+            clock-names = "extal", "extalr";
+            #clock-cells = <2>;
+            #power-domain-cells = <0>;
+            #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.txt b/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.txt
index 83f6c6a..4bf6f53 100644
--- a/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.txt
+++ b/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.txt
@@ -38,10 +38,17 @@
 - reg: offset and length of the USB 2.0 clock selector register block.
 - clocks: A list of phandles and specifier pairs.
 - clock-names: Name of the clocks.
- - The functional clock must be "ehci_ohci"
+ - The functional clock of USB 2.0 host side must be "ehci_ohci"
+ - The functional clock of HS-USB side must be "hs-usb-if"
  - The USB_EXTAL clock pin must be "usb_extal"
  - The USB_XTAL clock pin must be "usb_xtal"
 - #clock-cells: Must be 0
+- power-domains: A phandle and symbolic PM domain specifier.
+                 See power/renesas,rcar-sysc.yaml.
+- resets: A list of phandles and specifier pairs.
+- reset-names: Name of the resets.
+ - The reset of USB 2.0 host side must be "ehci_ohci"
+ - The reset of HS-USB side must be "hs-usb-if"
 
 Example (R-Car H3):
 
@@ -49,7 +56,11 @@
 		compatible = "renesas,r8a7795-rcar-usb2-clock-sel",
 			     "renesas,rcar-gen3-usb2-clock-sel";
 		reg = <0 0xe6590630 0 0x02>;
-		clocks = <&cpg CPG_MOD 703>, <&usb_extal>, <&usb_xtal>;
-		clock-names = "ehci_ohci", "usb_extal", "usb_xtal";
+		clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>,
+			 <&usb_extal>, <&usb_xtal>;
+		clock-names = "ehci_ohci", "hs-usb-if", "usb_extal", "usb_xtal";
 		#clock-cells = <0>;
+		power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+		resets = <&cpg 703>, <&cpg 704>;
+		reset-names = "ehci_ohci", "hs-usb-if";
 	};
diff --git a/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml
new file mode 100644
index 0000000..c3930ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/socionext,uniphier-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier clock controller
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+properties:
+  compatible:
+    oneOf:
+      - description: System clock
+        enum:
+          - socionext,uniphier-ld4-clock
+          - socionext,uniphier-pro4-clock
+          - socionext,uniphier-sld8-clock
+          - socionext,uniphier-pro5-clock
+          - socionext,uniphier-pxs2-clock
+          - socionext,uniphier-ld6b-clock
+          - socionext,uniphier-ld11-clock
+          - socionext,uniphier-ld20-clock
+          - socionext,uniphier-pxs3-clock
+      - description: Media I/O (MIO) clock, SD clock
+        enum:
+          - socionext,uniphier-ld4-mio-clock
+          - socionext,uniphier-pro4-mio-clock
+          - socionext,uniphier-sld8-mio-clock
+          - socionext,uniphier-pro5-sd-clock
+          - socionext,uniphier-pxs2-sd-clock
+          - socionext,uniphier-ld11-mio-clock
+          - socionext,uniphier-ld20-sd-clock
+          - socionext,uniphier-pxs3-sd-clock
+      - description: Peripheral clock
+        enum:
+          - socionext,uniphier-ld4-peri-clock
+          - socionext,uniphier-pro4-peri-clock
+          - socionext,uniphier-sld8-peri-clock
+          - socionext,uniphier-pro5-peri-clock
+          - socionext,uniphier-pxs2-peri-clock
+          - socionext,uniphier-ld11-peri-clock
+          - socionext,uniphier-ld20-peri-clock
+          - socionext,uniphier-pxs3-peri-clock
+
+  "#clock-cells":
+    const: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - "#clock-cells"
+
+examples:
+  - |
+    sysctrl@61840000 {
+        compatible = "socionext,uniphier-sysctrl", "simple-mfd", "syscon";
+        reg = <0x61840000 0x4000>;
+
+        clock {
+            compatible = "socionext,uniphier-ld11-clock";
+            #clock-cells = <1>;
+        };
+
+        // other nodes ...
+    };
+
+  - |
+    mioctrl@59810000 {
+        compatible = "socionext,uniphier-mioctrl", "simple-mfd", "syscon";
+        reg = <0x59810000 0x800>;
+
+        clock {
+            compatible = "socionext,uniphier-ld11-mio-clock";
+            #clock-cells = <1>;
+        };
+
+        // other nodes ...
+    };
+
+  - |
+    perictrl@59820000 {
+        compatible = "socionext,uniphier-perictrl", "simple-mfd", "syscon";
+        reg = <0x59820000 0x200>;
+
+        clock {
+            compatible = "socionext,uniphier-ld11-peri-clock";
+            #clock-cells = <1>;
+        };
+
+        // other nodes ...
+    };
diff --git a/Documentation/devicetree/bindings/clock/sprd,sc9860-clk.txt b/Documentation/devicetree/bindings/clock/sprd,sc9860-clk.txt
new file mode 100644
index 0000000..aaaf02c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sprd,sc9860-clk.txt
@@ -0,0 +1,63 @@
+Spreadtrum SC9860 Clock Binding
+------------------------
+
+Required properties:
+- compatible: should contain the following compatible strings:
+	- "sprd,sc9860-pmu-gate"
+	- "sprd,sc9860-pll"
+	- "sprd,sc9860-ap-clk"
+	- "sprd,sc9860-aon-prediv"
+	- "sprd,sc9860-apahb-gate"
+	- "sprd,sc9860-aon-gate"
+	- "sprd,sc9860-aonsecure-clk"
+	- "sprd,sc9860-agcp-gate"
+	- "sprd,sc9860-gpu-clk"
+	- "sprd,sc9860-vsp-clk"
+	- "sprd,sc9860-vsp-gate"
+	- "sprd,sc9860-cam-clk"
+	- "sprd,sc9860-cam-gate"
+	- "sprd,sc9860-disp-clk"
+	- "sprd,sc9860-disp-gate"
+	- "sprd,sc9860-apapb-gate"
+
+- #clock-cells: must be 1
+
+- clocks : Should be the input parent clock(s) phandle for the clock, this
+	   property here just simply shows which clock group the clocks'
+	   parents are in, since each clk node would represent many clocks
+	   which are defined in the driver.  The detailed dependency
+	   relationship (i.e. how many parents and which are the parents)
+	   are implemented in driver code.
+
+Optional properties:
+
+- reg:	Contain the registers base address and length. It must be configured
+	only if no 'sprd,syscon' under the node.
+
+- sprd,syscon: phandle to the syscon which is in the same address area with
+	       the clock, and so we can get regmap for the clocks from the
+	       syscon device.
+
+Example:
+
+	pmu_gate: pmu-gate {
+		compatible = "sprd,sc9860-pmu-gate";
+		sprd,syscon = <&pmu_regs>;
+		clocks = <&ext_26m>;
+		#clock-cells = <1>;
+	};
+
+	pll: pll {
+		compatible = "sprd,sc9860-pll";
+		sprd,syscon = <&ana_regs>;
+		clocks = <&pmu_gate 0>;
+		#clock-cells = <1>;
+	};
+
+	ap_clk: clock-controller@20000000 {
+		compatible = "sprd,sc9860-ap-clk";
+		reg = <0 0x20000000 0 0x400>;
+		clocks = <&ext_26m>, <&pll 0>,
+			 <&pmu_gate 0>;
+		#clock-cells = <1>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml
new file mode 100644
index 0000000..bb3a78d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2019 Unisoc Inc.
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/clock/sprd,sc9863a-clk.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: SC9863A Clock Control Unit Device Tree Bindings
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+properties:
+  "#clock-cells":
+    const: 1
+
+  compatible :
+    enum:
+      - sprd,sc9863a-ap-clk
+      - sprd,sc9863a-aon-clk
+      - sprd,sc9863a-apahb-gate
+      - sprd,sc9863a-pmu-gate
+      - sprd,sc9863a-aonapb-gate
+      - sprd,sc9863a-pll
+      - sprd,sc9863a-mpll
+      - sprd,sc9863a-rpll
+      - sprd,sc9863a-dpll
+      - sprd,sc9863a-mm-gate
+      - sprd,sc9863a-apapb-gate
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+    description: |
+      The input parent clock(s) phandle for this clock, only list fixed
+      clocks which are declared in devicetree.
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+    items:
+      - const: ext-26m
+      - const: ext-32k
+      - const: ext-4m
+      - const: rco-100m
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - '#clock-cells'
+
+if:
+  properties:
+    compatible:
+      enum:
+        - sprd,sc9863a-ap-clk
+        - sprd,sc9863a-aon-clk
+then:
+  required:
+    - reg
+
+else:
+  description: |
+    Other SC9863a clock nodes should be the child of a syscon node in
+    which compatible string shoule be:
+            "sprd,sc9863a-glbregs", "syscon", "simple-mfd"
+
+    The 'reg' property for the clock node is also required if there is a sub
+    range of registers for the clocks.
+
+examples:
+  - |
+    ap_clk: clock-controller@21500000 {
+      compatible = "sprd,sc9863a-ap-clk";
+      reg = <0 0x21500000 0 0x1000>;
+      clocks = <&ext_26m>, <&ext_32k>;
+      clock-names = "ext-26m", "ext-32k";
+      #clock-cells = <1>;
+    };
+
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      ap_ahb_regs: syscon@20e00000 {
+        compatible = "sprd,sc9863a-glbregs", "syscon", "simple-mfd";
+        reg = <0 0x20e00000 0 0x4000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0 0x20e00000 0x4000>;
+
+        apahb_gate: apahb-gate@0 {
+          compatible = "sprd,sc9863a-apahb-gate";
+          reg = <0x0 0x1020>;
+          #clock-cells = <1>;
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/sprd.txt b/Documentation/devicetree/bindings/clock/sprd.txt
deleted file mode 100644
index e9d179e..0000000
--- a/Documentation/devicetree/bindings/clock/sprd.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-Spreadtrum Clock Binding
-------------------------
-
-Required properties:
-- compatible: should contain the following compatible strings:
-	- "sprd,sc9860-pmu-gate"
-	- "sprd,sc9860-pll"
-	- "sprd,sc9860-ap-clk"
-	- "sprd,sc9860-aon-prediv"
-	- "sprd,sc9860-apahb-gate"
-	- "sprd,sc9860-aon-gate"
-	- "sprd,sc9860-aonsecure-clk"
-	- "sprd,sc9860-agcp-gate"
-	- "sprd,sc9860-gpu-clk"
-	- "sprd,sc9860-vsp-clk"
-	- "sprd,sc9860-vsp-gate"
-	- "sprd,sc9860-cam-clk"
-	- "sprd,sc9860-cam-gate"
-	- "sprd,sc9860-disp-clk"
-	- "sprd,sc9860-disp-gate"
-	- "sprd,sc9860-apapb-gate"
-
-- #clock-cells: must be 1
-
-- clocks : Should be the input parent clock(s) phandle for the clock, this
-	   property here just simply shows which clock group the clocks'
-	   parents are in, since each clk node would represent many clocks
-	   which are defined in the driver.  The detailed dependency
-	   relationship (i.e. how many parents and which are the parents)
-	   are implemented in driver code.
-
-Optional properties:
-
-- reg:	Contain the registers base address and length. It must be configured
-	only if no 'sprd,syscon' under the node.
-
-- sprd,syscon: phandle to the syscon which is in the same address area with
-	       the clock, and so we can get regmap for the clocks from the
-	       syscon device.
-
-Example:
-
-	pmu_gate: pmu-gate {
-		compatible = "sprd,sc9860-pmu-gate";
-		sprd,syscon = <&pmu_regs>;
-		clocks = <&ext_26m>;
-		#clock-cells = <1>;
-	};
-
-	pll: pll {
-		compatible = "sprd,sc9860-pll";
-		sprd,syscon = <&ana_regs>;
-		clocks = <&pmu_gate 0>;
-		#clock-cells = <1>;
-	};
-
-	ap_clk: clock-controller@20000000 {
-		compatible = "sprd,sc9860-ap-clk";
-		reg = <0 0x20000000 0 0x400>;
-		clocks = <&ext_26m>, <&pll 0>,
-			 <&pmu_gate 0>;
-		#clock-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml b/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml
new file mode 100644
index 0000000..869b18a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti,am654-ehrpwm-tbclk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI EHRPWM Time Base Clock
+
+maintainers:
+  - Vignesh Raghavendra <vigneshr@ti.com>
+
+properties:
+  compatible:
+    items:
+      - const: ti,am654-ehrpwm-tbclk
+      - const: syscon
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+
+examples:
+  - |
+    ehrpwm_tbclk: syscon@4140 {
+        compatible = "ti,am654-ehrpwm-tbclk", "syscon";
+        reg = <0x4140 0x18>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/uniphier-clock.txt b/Documentation/devicetree/bindings/clock/uniphier-clock.txt
deleted file mode 100644
index 7b5f602..0000000
--- a/Documentation/devicetree/bindings/clock/uniphier-clock.txt
+++ /dev/null
@@ -1,132 +0,0 @@
-UniPhier clock controller
-
-
-System clock
-------------
-
-Required properties:
-- compatible: should be one of the following:
-    "socionext,uniphier-ld4-clock"  - for LD4 SoC.
-    "socionext,uniphier-pro4-clock" - for Pro4 SoC.
-    "socionext,uniphier-sld8-clock" - for sLD8 SoC.
-    "socionext,uniphier-pro5-clock" - for Pro5 SoC.
-    "socionext,uniphier-pxs2-clock" - for PXs2/LD6b SoC.
-    "socionext,uniphier-ld11-clock" - for LD11 SoC.
-    "socionext,uniphier-ld20-clock" - for LD20 SoC.
-    "socionext,uniphier-pxs3-clock" - for PXs3 SoC
-- #clock-cells: should be 1.
-
-Example:
-
-	sysctrl@61840000 {
-		compatible = "socionext,uniphier-sysctrl",
-			     "simple-mfd", "syscon";
-		reg = <0x61840000 0x4000>;
-
-		clock {
-			compatible = "socionext,uniphier-ld11-clock";
-			#clock-cells = <1>;
-		};
-
-		other nodes ...
-	};
-
-Provided clocks:
-
- 8: ST DMAC
-12: GIO (Giga bit stream I/O)
-14: USB3 ch0 host
-15: USB3 ch1 host
-16: USB3 ch0 PHY0
-17: USB3 ch0 PHY1
-20: USB3 ch1 PHY0
-21: USB3 ch1 PHY1
-
-
-Media I/O (MIO) clock, SD clock
--------------------------------
-
-Required properties:
-- compatible: should be one of the following:
-    "socionext,uniphier-ld4-mio-clock"  - for LD4 SoC.
-    "socionext,uniphier-pro4-mio-clock" - for Pro4 SoC.
-    "socionext,uniphier-sld8-mio-clock" - for sLD8 SoC.
-    "socionext,uniphier-pro5-sd-clock"  - for Pro5 SoC.
-    "socionext,uniphier-pxs2-sd-clock"  - for PXs2/LD6b SoC.
-    "socionext,uniphier-ld11-mio-clock" - for LD11 SoC.
-    "socionext,uniphier-ld20-sd-clock"  - for LD20 SoC.
-    "socionext,uniphier-pxs3-sd-clock"  - for PXs3 SoC
-- #clock-cells: should be 1.
-
-Example:
-
-	mioctrl@59810000 {
-		compatible = "socionext,uniphier-mioctrl",
-			     "simple-mfd", "syscon";
-		reg = <0x59810000 0x800>;
-
-		clock {
-			compatible = "socionext,uniphier-ld11-mio-clock";
-			#clock-cells = <1>;
-		};
-
-		other nodes ...
-	};
-
-Provided clocks:
-
- 0: SD ch0 host
- 1: eMMC host
- 2: SD ch1 host
- 7: MIO DMAC
- 8: USB2 ch0 host
- 9: USB2 ch1 host
-10: USB2 ch2 host
-12: USB2 ch0 PHY
-13: USB2 ch1 PHY
-14: USB2 ch2 PHY
-
-
-Peripheral clock
-----------------
-
-Required properties:
-- compatible: should be one of the following:
-    "socionext,uniphier-ld4-peri-clock"  - for LD4 SoC.
-    "socionext,uniphier-pro4-peri-clock" - for Pro4 SoC.
-    "socionext,uniphier-sld8-peri-clock" - for sLD8 SoC.
-    "socionext,uniphier-pro5-peri-clock" - for Pro5 SoC.
-    "socionext,uniphier-pxs2-peri-clock" - for PXs2/LD6b SoC.
-    "socionext,uniphier-ld11-peri-clock" - for LD11 SoC.
-    "socionext,uniphier-ld20-peri-clock" - for LD20 SoC.
-    "socionext,uniphier-pxs3-peri-clock" - for PXs3 SoC
-- #clock-cells: should be 1.
-
-Example:
-
-	perictrl@59820000 {
-		compatible = "socionext,uniphier-perictrl",
-			     "simple-mfd", "syscon";
-		reg = <0x59820000 0x200>;
-
-		clock {
-			compatible = "socionext,uniphier-ld11-peri-clock";
-			#clock-cells = <1>;
-		};
-
-		other nodes ...
-	};
-
-Provided clocks:
-
- 0: UART ch0
- 1: UART ch1
- 2: UART ch2
- 3: UART ch3
- 4: I2C ch0
- 5: I2C ch1
- 6: I2C ch2
- 7: I2C ch3
- 8: I2C ch4
- 9: I2C ch5
-10: I2C ch6
diff --git a/Documentation/devicetree/bindings/connector/samsung,usb-connector-11pin.txt b/Documentation/devicetree/bindings/connector/samsung,usb-connector-11pin.txt
index 22256e2..3dd8961 100644
--- a/Documentation/devicetree/bindings/connector/samsung,usb-connector-11pin.txt
+++ b/Documentation/devicetree/bindings/connector/samsung,usb-connector-11pin.txt
@@ -19,7 +19,7 @@
     0: High Speed (HS),
     3: Mobile High-Definition Link (MHL), specific to 11-pin Samsung micro-USB.
 
-[1]: bindings/connector/usb-connector.txt
+[1]: bindings/connector/usb-connector.yaml
 
 Example
 -------
diff --git a/Documentation/devicetree/bindings/connector/usb-connector.txt b/Documentation/devicetree/bindings/connector/usb-connector.txt
deleted file mode 100644
index 88578ac..0000000
--- a/Documentation/devicetree/bindings/connector/usb-connector.txt
+++ /dev/null
@@ -1,135 +0,0 @@
-USB Connector
-=============
-
-A USB connector node represents a physical USB connector. It should be
-a child of a USB interface controller.
-
-Required properties:
-- compatible: describes type of the connector, must be one of:
-    "usb-a-connector",
-    "usb-b-connector",
-    "usb-c-connector".
-
-Optional properties:
-- label: symbolic name for the connector,
-- type: size of the connector, should be specified in case of USB-A, USB-B
-  non-fullsize connectors: "mini", "micro".
-- self-powered: Set this property if the usb device that has its own power
-  source.
-
-Optional properties for usb-b-connector:
-- id-gpios: an input gpio for USB ID pin.
-- vbus-gpios: an input gpio for USB VBUS pin, used to detect presence of
-  VBUS 5V.
-  see gpio/gpio.txt.
-- vbus-supply: a phandle to the regulator for USB VBUS if needed when host
-  mode or dual role mode is supported.
-  Particularly, if use an output GPIO to control a VBUS regulator, should
-  model it as a regulator.
-  see regulator/fixed-regulator.yaml
-- pinctrl-names : a pinctrl state named "default" is optional
-- pinctrl-0 : pin control group
-  see pinctrl/pinctrl-bindings.txt
-
-Optional properties for usb-c-connector:
-- power-role: should be one of "source", "sink" or "dual"(DRP) if typec
-  connector has power support.
-- try-power-role: preferred power role if "dual"(DRP) can support Try.SNK
-  or Try.SRC, should be "sink" for Try.SNK or "source" for Try.SRC.
-- data-role: should be one of "host", "device", "dual"(DRD) if typec
-  connector supports USB data.
-
-Required properties for usb-c-connector with power delivery support:
-- source-pdos: An array of u32 with each entry providing supported power
-  source data object(PDO), the detailed bit definitions of PDO can be found
-  in "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.2
-  Source_Capabilities Message, the order of each entry(PDO) should follow
-  the PD spec chapter 6.4.1. Required for power source and power dual role.
-  User can specify the source PDO array via PDO_FIXED/BATT/VAR/PPS_APDO()
-  defined in dt-bindings/usb/pd.h.
-- sink-pdos: An array of u32 with each entry providing supported power
-  sink data object(PDO), the detailed bit definitions of PDO can be found
-  in "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.3
-  Sink Capabilities Message, the order of each entry(PDO) should follow
-  the PD spec chapter 6.4.1. Required for power sink and power dual role.
-  User can specify the sink PDO array via PDO_FIXED/BATT/VAR/PPS_APDO() defined
-  in dt-bindings/usb/pd.h.
-- op-sink-microwatt: Sink required operating power in microwatt, if source
-  can't offer the power, Capability Mismatch is set. Required for power
-  sink and power dual role.
-
-Required nodes:
-- any data bus to the connector should be modeled using the OF graph bindings
-  specified in bindings/graph.txt, unless the bus is between parent node and
-  the connector. Since single connector can have multiple data buses every bus
-  has assigned OF graph port number as follows:
-    0: High Speed (HS), present in all connectors,
-    1: Super Speed (SS), present in SS capable connectors,
-    2: Sideband use (SBU), present in USB-C.
-
-Examples
---------
-
-1. Micro-USB connector with HS lines routed via controller (MUIC):
-
-muic-max77843@66 {
-	...
-	usb_con: connector {
-		compatible = "usb-b-connector";
-		label = "micro-USB";
-		type = "micro";
-	};
-};
-
-2. USB-C connector attached to CC controller (s2mm005), HS lines routed
-to companion PMIC (max77865), SS lines to USB3 PHY and SBU to DisplayPort.
-DisplayPort video lines are routed to the connector via SS mux in USB3 PHY.
-
-ccic: s2mm005@33 {
-	...
-	usb_con: connector {
-		compatible = "usb-c-connector";
-		label = "USB-C";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				usb_con_hs: endpoint {
-					remote-endpoint = <&max77865_usbc_hs>;
-				};
-			};
-			port@1 {
-				reg = <1>;
-				usb_con_ss: endpoint {
-					remote-endpoint = <&usbdrd_phy_ss>;
-				};
-			};
-			port@2 {
-				reg = <2>;
-				usb_con_sbu: endpoint {
-					remote-endpoint = <&dp_aux>;
-				};
-			};
-		};
-	};
-};
-
-3. USB-C connector attached to a typec port controller(ptn5110), which has
-power delivery support and enables drp.
-
-typec: ptn5110@50 {
-	...
-	usb_con: connector {
-		compatible = "usb-c-connector";
-		label = "USB-C";
-		power-role = "dual";
-		try-power-role = "sink";
-		source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
-		sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)
-			     PDO_VAR(5000, 12000, 2000)>;
-		op-sink-microwatt = <10000000>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml
new file mode 100644
index 0000000..4638d7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml
@@ -0,0 +1,206 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/connector/usb-connector.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: USB Connector
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+description:
+  A USB connector node represents a physical USB connector. It should be a child
+  of a USB interface controller.
+
+properties:
+  compatible:
+    enum:
+      - usb-a-connector
+      - usb-b-connector
+      - usb-c-connector
+
+  label:
+    description: Symbolic name for the connector.
+
+  type:
+    description: Size of the connector, should be specified in case of
+      non-fullsize 'usb-a-connector' or 'usb-b-connector' compatible
+      connectors.
+    allOf:
+      - $ref: /schemas/types.yaml#definitions/string
+    enum:
+      - mini
+      - micro
+
+  self-powered:
+    description: Set this property if the USB device has its own power source.
+    type: boolean
+
+  # The following are optional properties for "usb-b-connector".
+  id-gpios:
+    description: An input gpio for USB ID pin.
+    maxItems: 1
+
+  vbus-gpios:
+    description: An input gpio for USB VBus pin, used to detect presence of
+      VBUS 5V.
+    maxItems: 1
+
+  vbus-supply:
+    description: A phandle to the regulator for USB VBUS if needed when host
+      mode or dual role mode is supported.
+      Particularly, if use an output GPIO to control a VBUS regulator, should
+      model it as a regulator. See bindings/regulator/fixed-regulator.yaml
+
+  # The following are optional properties for "usb-c-connector".
+  power-role:
+    description: Determines the power role that the Type C connector will
+      support. "dual" refers to Dual Role Port (DRP).
+    allOf:
+      - $ref: /schemas/types.yaml#definitions/string
+    enum:
+      - source
+      - sink
+      - dual
+
+  try-power-role:
+    description: Preferred power role.
+    allOf:
+      - $ref: /schemas/types.yaml#definitions/string
+    enum:
+     - source
+     - sink
+     - dual
+
+  data-role:
+    description: Data role if Type C connector supports USB data. "dual" refers
+      Dual Role Device (DRD).
+    allOf:
+      - $ref: /schemas/types.yaml#definitions/string
+    enum:
+      - host
+      - device
+      - dual
+
+  # The following are optional properties for "usb-c-connector" with power
+  # delivery support.
+  source-pdos:
+    description: An array of u32 with each entry providing supported power
+      source data object(PDO), the detailed bit definitions of PDO can be found
+      in "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.2
+      Source_Capabilities Message, the order of each entry(PDO) should follow
+      the PD spec chapter 6.4.1. Required for power source and power dual role.
+      User can specify the source PDO array via PDO_FIXED/BATT/VAR/PPS_APDO()
+      defined in dt-bindings/usb/pd.h.
+    minItems: 1
+    maxItems: 7
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  sink-pdos:
+    description: An array of u32 with each entry providing supported power sink
+      data object(PDO), the detailed bit definitions of PDO can be found in
+      "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.3
+      Sink Capabilities Message, the order of each entry(PDO) should follow the
+      PD spec chapter 6.4.1. Required for power sink and power dual role. User
+      can specify the sink PDO array via PDO_FIXED/BATT/VAR/PPS_APDO() defined
+      in dt-bindings/usb/pd.h.
+    minItems: 1
+    maxItems: 7
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  op-sink-microwatt:
+    description: Sink required operating power in microwatt, if source can't
+      offer the power, Capability Mismatch is set. Required for power sink and
+      power dual role.
+
+  ports:
+    description: OF graph bindings (specified in bindings/graph.txt) that model
+      any data bus to the connector unless the bus is between parent node and
+      the connector. Since a single connector can have multiple data buses every
+      bus has an assigned OF graph port number as described below.
+    type: object
+    properties:
+      port@0:
+        type: object
+        description: High Speed (HS), present in all connectors.
+
+      port@1:
+        type: object
+        description: Super Speed (SS), present in SS capable connectors.
+
+      port@2:
+        type: object
+        description: Sideband Use (SBU), present in USB-C. This describes the
+          alternate mode connection of which SBU is a part.
+
+    required:
+      - port@0
+
+required:
+  - compatible
+
+examples:
+  # Micro-USB connector with HS lines routed via controller (MUIC).
+  - |+
+    muic-max77843 {
+      usb_con1: connector {
+        compatible = "usb-b-connector";
+        label = "micro-USB";
+        type = "micro";
+      };
+    };
+
+  # USB-C connector attached to CC controller (s2mm005), HS lines routed
+  # to companion PMIC (max77865), SS lines to USB3 PHY and SBU to DisplayPort.
+  # DisplayPort video lines are routed to the connector via SS mux in USB3 PHY.
+  - |+
+    ccic: s2mm005 {
+      usb_con2: connector {
+        compatible = "usb-c-connector";
+        label = "USB-C";
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+            usb_con_hs: endpoint {
+              remote-endpoint = <&max77865_usbc_hs>;
+            };
+          };
+          port@1 {
+            reg = <1>;
+            usb_con_ss: endpoint {
+              remote-endpoint = <&usbdrd_phy_ss>;
+            };
+          };
+          port@2 {
+            reg = <2>;
+            usb_con_sbu: endpoint {
+              remote-endpoint = <&dp_aux>;
+            };
+          };
+        };
+      };
+    };
+
+  # USB-C connector attached to a typec port controller(ptn5110), which has
+  # power delivery support and enables drp.
+  - |+
+    #include <dt-bindings/usb/pd.h>
+    typec: ptn5110 {
+      usb_con3: connector {
+        compatible = "usb-c-connector";
+        label = "USB-C";
+        power-role = "dual";
+        try-power-role = "sink";
+        source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
+        sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)
+                     PDO_VAR(5000, 12000, 2000)>;
+        op-sink-microwatt = <10000000>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/crypto/fsl-dcp.txt b/Documentation/devicetree/bindings/crypto/fsl-dcp.txt
index 4e4d387..513499f 100644
--- a/Documentation/devicetree/bindings/crypto/fsl-dcp.txt
+++ b/Documentation/devicetree/bindings/crypto/fsl-dcp.txt
@@ -11,7 +11,7 @@
 
 Example:
 
-dcp@80028000 {
+dcp: crypto@80028000 {
 	compatible = "fsl,imx28-dcp", "fsl,imx23-dcp";
 	reg = <0x80028000 0x2000>;
 	interrupts = <52 53>;
diff --git a/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.txt b/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.txt
index e8a35c7..db690b1 100644
--- a/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.txt
+++ b/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.txt
@@ -8,7 +8,7 @@
 
 Example:
 
-sah@10025000 {
+sah: crypto@10025000 {
 	compatible = "fsl,imx27-sahara";
 	reg = <	0x10025000 0x800>;
 	interrupts = <75>;
diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
index 2fe245c..8f359f4 100644
--- a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
+++ b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
@@ -138,7 +138,7 @@
 
 iMX6UL does only require three clocks
 
-	crypto: caam@2140000 {
+	crypto: crypto@2140000 {
 		compatible = "fsl,sec-v4.0";
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
index d1205a6..a8d202c 100644
--- a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
@@ -71,9 +71,9 @@
     maxItems: 2
 
   reg-names:
-   items:
-     - const: vpu
-     - const: hhi
+    items:
+      - const: vpu
+      - const: hhi
 
   interrupts:
     maxItems: 1
@@ -107,6 +107,8 @@
   - "#address-cells"
   - "#size-cells"
 
+additionalProperties: false
+
 examples:
   - |
     vpu: vpu@d0100000 {
diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7123.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7123.txt
index a6b2b2b..d3c2a49 100644
--- a/Documentation/devicetree/bindings/display/bridge/adi,adv7123.txt
+++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7123.txt
@@ -1,5 +1,5 @@
-Analog Device ADV7123 Video DAC
--------------------------------
+Analog Devices ADV7123 Video DAC
+--------------------------------
 
 The ADV7123 is a digital-to-analog converter that outputs VGA signals from a
 parallel video input.
diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
index e8ddec5..659523f 100644
--- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
+++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
@@ -1,5 +1,5 @@
-Analog Device ADV7511(W)/13/33/35 HDMI Encoders
------------------------------------------
+Analog Devices ADV7511(W)/13/33/35 HDMI Encoders
+------------------------------------------------
 
 The ADV7511, ADV7511W, ADV7513, ADV7533 and ADV7535 are HDMI audio and video
 transmitters compatible with HDMI 1.4 and DVI 1.0. They support color space
diff --git a/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt b/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt
deleted file mode 100644
index 8def11b..0000000
--- a/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Vivante GPU core devices
-========================
-
-Required properties:
-- compatible: Should be "vivante,gc"
-  A more specific compatible is not needed, as the cores contain chip
-  identification registers at fixed locations, which provide all the
-  necessary information to the driver.
-- reg: should be register base and length as documented in the
-  datasheet
-- interrupts: Should contain the cores interrupt line
-- clocks: should contain one clock for entry in clock-names
-  see Documentation/devicetree/bindings/clock/clock-bindings.txt
-- clock-names:
-   - "bus":    AXI/master interface clock
-   - "reg":    AHB/slave interface clock
-               (only required if GPU can gate slave interface independently)
-   - "core":   GPU core clock
-   - "shader": Shader clock (only required if GPU has feature PIPE_3D)
-
-Optional properties:
-- power-domains: a power domain consumer specifier according to
-  Documentation/devicetree/bindings/power/power_domain.txt
-
-example:
-
-gpu_3d: gpu@130000 {
-	compatible = "vivante,gc";
-	reg = <0x00130000 0x4000>;
-	interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&clks IMX6QDL_CLK_GPU3D_AXI>,
-	         <&clks IMX6QDL_CLK_GPU3D_CORE>,
-	         <&clks IMX6QDL_CLK_GPU3D_SHADER>;
-	clock-names = "bus", "core", "shader";
-	power-domains = <&gpc 1>;
-};
diff --git a/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml b/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml
index f638703..0cd74c8 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml
@@ -21,15 +21,6 @@
       - {}
       - const: panel-dpi
 
-  data-mapping:
-    enum:
-      - rgb24
-      - rgb565
-      - bgr666
-    description: |
-      Describes the media format, how the display panel is connected
-      to the display interface.
-
   backlight: true
   enable-gpios: true
   height-mm: true
@@ -52,7 +43,6 @@
         compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
         label = "osddisplay";
         power-supply = <&vcc_supply>;
-        data-mapping = "rgb565";
         backlight = <&backlight>;
 
         port {
diff --git a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
index cac61a9..eb04c23 100644
--- a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
+++ b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
@@ -65,7 +65,7 @@
   ports:
     type: object
     description:
-      Ports as described in Documentation/devictree/bindings/graph.txt
+      Ports as described in Documentation/devicetree/bindings/graph.txt
     properties:
       "#address-cells":
         const: 1
@@ -121,7 +121,7 @@
     #include <dt-bindings/interrupt-controller/irq.h>
     #include <dt-bindings/soc/ti,sci_pm_domain.h>
 
-    dss: dss@04a00000 {
+    dss: dss@4a00000 {
             compatible = "ti,am65x-dss";
             reg =   <0x0 0x04a00000 0x0 0x1000>, /* common */
                     <0x0 0x04a02000 0x0 0x1000>, /* vidl1 */
diff --git a/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml
index ade9b2f5..eb4b1a2 100644
--- a/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml
+++ b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml
@@ -98,7 +98,7 @@
   ports:
     type: object
     description:
-      Ports as described in Documentation/devictree/bindings/graph.txt
+      Ports as described in Documentation/devicetree/bindings/graph.txt
     properties:
       "#address-cells":
         const: 1
@@ -154,7 +154,7 @@
     #include <dt-bindings/interrupt-controller/irq.h>
     #include <dt-bindings/soc/ti,sci_pm_domain.h>
 
-    dss: dss@04a00000 {
+    dss: dss@4a00000 {
             compatible = "ti,j721e-dss";
             reg =   <0x00 0x04a00000 0x00 0x10000>, /* common_m */
                     <0x00 0x04a10000 0x00 0x10000>, /* common_s0*/
diff --git a/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml
index 385bd06..8f87b82 100644
--- a/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml
+++ b/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml
@@ -56,7 +56,7 @@
   port:
     type: object
     description:
-      Port as described in Documentation/devictree/bindings/graph.txt.
+      Port as described in Documentation/devicetree/bindings/graph.txt.
       The DSS DPI output port node
 
   max-memory-bandwidth:
@@ -81,7 +81,7 @@
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interrupt-controller/irq.h>
 
-    dss: dss@02540000 {
+    dss: dss@2540000 {
             compatible = "ti,k2g-dss";
             reg =   <0x02540000 0x400>,
                     <0x02550000 0x1000>,
diff --git a/Documentation/devicetree/bindings/dma/adi,axi-dmac.txt b/Documentation/devicetree/bindings/dma/adi,axi-dmac.txt
index b38ee73..cd17684 100644
--- a/Documentation/devicetree/bindings/dma/adi,axi-dmac.txt
+++ b/Documentation/devicetree/bindings/dma/adi,axi-dmac.txt
@@ -1,4 +1,4 @@
-Analog Device AXI-DMAC DMA controller
+Analog Devices AXI-DMAC DMA controller
 
 Required properties:
  - compatible: Must be "adi,axi-dmac-1.00.a".
diff --git a/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt b/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt
index f1f95f6..e8f6c42 100644
--- a/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt
+++ b/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt
@@ -16,6 +16,7 @@
 	  - "renesas,r8a7794-usb-dmac" (R-Car E2)
 	  - "renesas,r8a7795-usb-dmac" (R-Car H3)
 	  - "renesas,r8a7796-usb-dmac" (R-Car M3-W)
+	  - "renesas,r8a77961-usb-dmac" (R-Car M3-W+)
 	  - "renesas,r8a77965-usb-dmac" (R-Car M3-N)
 	  - "renesas,r8a77990-usb-dmac" (R-Car E3)
 	  - "renesas,r8a77995-usb-dmac" (R-Car D3)
diff --git a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
index 2ca3ddb..e7f2ad7 100644
--- a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
+++ b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
@@ -43,6 +43,8 @@
   - interrupts
   - '#dma-cells'
 
+additionalProperties: false
+
 examples:
   - |
     dma@3000000 {
diff --git a/Documentation/devicetree/bindings/dma/socionext,uniphier-mio-dmac.yaml b/Documentation/devicetree/bindings/dma/socionext,uniphier-mio-dmac.yaml
new file mode 100644
index 0000000..e7bf6dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/socionext,uniphier-mio-dmac.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/socionext,uniphier-mio-dmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier Media IO DMA controller
+
+description: |
+  This works as an external DMA engine for SD/eMMC controllers etc.
+  found in UniPhier LD4, Pro4, sLD8 SoCs.
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  compatible:
+    const: socionext,uniphier-mio-dmac
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: |
+      A list of interrupt specifiers associated with the DMA channels.
+      The number of interrupt lines is SoC-dependent.
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  '#dma-cells':
+    description: The single cell represents the channel index.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - '#dma-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    // In the example below, "interrupts = <0 68 4>, <0 68 4>, ..." is not a
+    // typo. The first two channels share a single interrupt line.
+
+    dmac: dma-controller@5a000000 {
+        compatible = "socionext,uniphier-mio-dmac";
+        reg = <0x5a000000 0x1000>;
+        interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>,
+                     <0 71 4>, <0 72 4>, <0 73 4>, <0 74 4>;
+        clocks = <&mio_clk 7>;
+        resets = <&mio_rst 7>;
+        #dma-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/dma/socionext,uniphier-xdmac.yaml b/Documentation/devicetree/bindings/dma/socionext,uniphier-xdmac.yaml
new file mode 100644
index 0000000..86cfb59
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/socionext,uniphier-xdmac.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/socionext,uniphier-xdmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier external DMA controller
+
+description: |
+  This describes the devicetree bindings for an external DMA engine to perform
+  memory-to-memory or peripheral-to-memory data transfer capable of supporting
+  16 channels, implemented in Socionext UniPhier SoCs.
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  compatible:
+    const: socionext,uniphier-xdmac
+
+  reg:
+    items:
+      - description: XDMAC base register region (offset and length)
+      - description: XDMAC extension register region (offset and length)
+
+  interrupts:
+    maxItems: 1
+
+  "#dma-cells":
+    const: 2
+    description: |
+      DMA request from clients consists of 2 cells:
+        1. Channel index
+        2. Transfer request factor number, If no transfer factor, use 0.
+           The number is SoC-specific, and this should be specified with
+           relation to the device to use the DMA controller.
+
+  dma-channels:
+    minimum: 1
+    maximum: 16
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#dma-cells"
+
+examples:
+  - |
+    xdmac: dma-controller@5fc10000 {
+        compatible = "socionext,uniphier-xdmac";
+        reg = <0x5fc10000 0x1000>, <0x5fc20000 0x800>;
+        interrupts = <0 188 4>;
+        #dma-cells = <2>;
+        dma-channels = <16>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt
index 0e1398f..29fcd37 100644
--- a/Documentation/devicetree/bindings/dma/ti-edma.txt
+++ b/Documentation/devicetree/bindings/dma/ti-edma.txt
@@ -180,7 +180,7 @@
 };
 
 edma1_tptc1: tptc@27b8000 {
-	compatible = "ti, k2g-edma3-tptc", "ti,edma3-tptc";
+	compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
 	reg =	<0x027b8000 0x400>;
 	power-domains = <&k2g_pds 0x4f>;
 };
diff --git a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml
index 34780d7..39ea05e 100644
--- a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml
+++ b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml
@@ -45,7 +45,8 @@
 
 properties:
   "#dma-cells":
-    const: 1
+    minimum: 1
+    maximum: 2
     description: |
       The cell is the PSI-L  thread ID of the remote (to UDMAP) end.
       Valid ranges for thread ID depends on the data movement direction:
@@ -55,6 +56,8 @@
       Please refer to the device documentation for the PSI-L thread map and also
       the PSI-L peripheral chapter for the correct thread ID.
 
+      When #dma-cells is 2, the second parameter is the channel ATYPE.
+
   compatible:
     enum:
       - ti,am654-navss-main-udmap
@@ -131,6 +134,20 @@
   - ti,sci-rm-range-rchan
   - ti,sci-rm-range-rflow
 
+if:
+  properties:
+    "#dma-cells":
+      const: 2
+then:
+  properties:
+    ti,udma-atype:
+      description: ATYPE value which should be used by non slave channels
+      allOf:
+        - $ref: /schemas/types.yaml#/definitions/uint32
+
+  required:
+    - ti,udma-atype
+
 examples:
   - |+
     cbass_main {
diff --git a/Documentation/devicetree/bindings/dma/uniphier-mio-dmac.txt b/Documentation/devicetree/bindings/dma/uniphier-mio-dmac.txt
deleted file mode 100644
index b12388d..0000000
--- a/Documentation/devicetree/bindings/dma/uniphier-mio-dmac.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-UniPhier Media IO DMA controller
-
-This works as an external DMA engine for SD/eMMC controllers etc.
-found in UniPhier LD4, Pro4, sLD8 SoCs.
-
-Required properties:
-- compatible: should be "socionext,uniphier-mio-dmac".
-- reg: offset and length of the register set for the device.
-- interrupts: a list of interrupt specifiers associated with the DMA channels.
-- clocks: a single clock specifier.
-- #dma-cells: should be <1>. The single cell represents the channel index.
-
-Example:
-	dmac: dma-controller@5a000000 {
-		compatible = "socionext,uniphier-mio-dmac";
-		reg = <0x5a000000 0x1000>;
-		interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>,
-			     <0 71 4>, <0 72 4>, <0 73 4>, <0 74 4>;
-		clocks = <&mio_clk 7>;
-		#dma-cells = <1>;
-	};
-
-Note:
-In the example above, "interrupts = <0 68 4>, <0 68 4>, ..." is not a typo.
-The first two channels share a single interrupt line.
diff --git a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
index f04870d..a5dc070 100644
--- a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
+++ b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
@@ -68,6 +68,8 @@
   - mbox-names
   - memory-region
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/firmware/imx/rsrc.h>
diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml
index 0f6d8db..a15787e 100644
--- a/Documentation/devicetree/bindings/eeprom/at24.yaml
+++ b/Documentation/devicetree/bindings/eeprom/at24.yaml
@@ -172,6 +172,8 @@
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     i2c {
diff --git a/Documentation/devicetree/bindings/example-schema.yaml b/Documentation/devicetree/bindings/example-schema.yaml
index 4ddcf70..62811a1 100644
--- a/Documentation/devicetree/bindings/example-schema.yaml
+++ b/Documentation/devicetree/bindings/example-schema.yaml
@@ -7,9 +7,9 @@
 
 # $id is a unique identifier based on the filename. There may or may not be a
 # file present at the URL.
-$id: "http://devicetree.org/schemas/example-schema.yaml#"
+$id: http://devicetree.org/schemas/example-schema.yaml#
 # $schema is the meta-schema this schema should be validated with.
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: An example schema annotated with jsonschema details
 
diff --git a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.txt b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.txt
deleted file mode 100644
index 8e8625c0..0000000
--- a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-ChromeOS EC USB Type-C cable and accessories detection
-
-On ChromeOS systems with USB Type C ports, the ChromeOS Embedded Controller is
-able to detect the state of external accessories such as display adapters
-or USB devices when said accessories are attached or detached.
-
-The node for this device must be under a cros-ec node like google,cros-ec-spi
-or google,cros-ec-i2c.
-
-Required properties:
-- compatible:		Should be "google,extcon-usbc-cros-ec".
-- google,usb-port-id:	Specifies the USB port ID to use.
-
-Example:
-	cros-ec@0 {
-		compatible = "google,cros-ec-i2c";
-
-		...
-
-		extcon {
-			compatible = "google,extcon-usbc-cros-ec";
-			google,usb-port-id = <0>;
-		};
-	}
diff --git a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml
new file mode 100644
index 0000000..9c5849b
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/extcon/extcon-usbc-cros-ec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ChromeOS EC USB Type-C cable and accessories detection
+
+maintainers:
+  - Benson Leung <bleung@chromium.org>
+  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
+
+description: |
+  On ChromeOS systems with USB Type C ports, the ChromeOS Embedded Controller is
+  able to detect the state of external accessories such as display adapters
+  or USB devices when said accessories are attached or detached.
+  The node for this device must be under a cros-ec node like google,cros-ec-spi
+  or google,cros-ec-i2c.
+
+properties:
+  compatible:
+    const: google,extcon-usbc-cros-ec
+
+  google,usb-port-id:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+    description: the port id
+    minimum: 0
+    maximum: 255
+
+required:
+  - compatible
+  - google,usb-port-id
+
+additionalProperties: false
+
+examples:
+  - |
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        cros-ec@0 {
+            compatible = "google,cros-ec-spi";
+            reg = <0>;
+
+            usbc_extcon0: extcon0 {
+                compatible = "google,extcon-usbc-cros-ec";
+                google,usb-port-id = <0>;
+            };
+
+            usbc_extcon1: extcon1 {
+                compatible = "google,extcon-usbc-cros-ec";
+                google,usb-port-id = <1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml b/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml
index 878a207..1bd2870 100644
--- a/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml
+++ b/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml
@@ -34,9 +34,12 @@
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     npe@c8006000 {
          compatible = "intel,ixp4xx-network-processing-engine";
          reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>;
     };
+...
diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.txt b/Documentation/devicetree/bindings/firmware/qcom,scm.txt
index 3f29ea0..354b448 100644
--- a/Documentation/devicetree/bindings/firmware/qcom,scm.txt
+++ b/Documentation/devicetree/bindings/firmware/qcom,scm.txt
@@ -10,6 +10,7 @@
  * "qcom,scm-apq8064"
  * "qcom,scm-apq8084"
  * "qcom,scm-ipq4019"
+ * "qcom,scm-ipq806x"
  * "qcom,scm-msm8660"
  * "qcom,scm-msm8916"
  * "qcom,scm-msm8960"
diff --git a/Documentation/devicetree/bindings/fpga/fpga-region.txt b/Documentation/devicetree/bindings/fpga/fpga-region.txt
index 90c4469..8ab19d1 100644
--- a/Documentation/devicetree/bindings/fpga/fpga-region.txt
+++ b/Documentation/devicetree/bindings/fpga/fpga-region.txt
@@ -263,7 +263,7 @@
 			gpio@10040 {
 				compatible = "altr,pio-1.0";
 				reg = <0x10040 0x20>;
-				altr,gpio-bank-width = <4>;
+				altr,ngpio = <4>;
 				#gpio-cells = <2>;
 				clocks = <2>;
 				gpio-controller;
@@ -468,8 +468,7 @@
 				compatible = "altr,pio-1.0";
 				reg = <0x10040 0x20>;
 				clocks = <0x2>;
-				altr,gpio-bank-width = <0x4>;
-				resetvalue = <0x0>;
+				altr,ngpio = <0x4>;
 				#gpio-cells = <0x2>;
 				gpio-controller;
 			};
diff --git a/Documentation/devicetree/bindings/gnss/gnss.txt b/Documentation/devicetree/bindings/gnss/gnss.txt
index f547bd4..d6dc9c0 100644
--- a/Documentation/devicetree/bindings/gnss/gnss.txt
+++ b/Documentation/devicetree/bindings/gnss/gnss.txt
@@ -8,7 +8,7 @@
 
 Please refer to the following documents for generic properties:
 
-	Documentation/devicetree/bindings/serial/slave-device.txt
+	Documentation/devicetree/bindings/serial/serial.yaml
 	Documentation/devicetree/bindings/spi/spi-bus.txt
 
 Required properties:
diff --git a/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml
index 64e279a..5f1ed20e 100644
--- a/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml
@@ -47,6 +47,8 @@
   - "#gpio-cells"
   - gpio-controller
 
+additionalProperties: false
+
 dependencies:
   interrupt-controller: [ interrupts ]
 
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt b/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt
index 2e097b5..0fc6700 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt
@@ -14,7 +14,7 @@
 
     "marvell,armada-8k-gpio" should be used for the Armada 7K and 8K
     SoCs (either from AP or CP), see
-    Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
+    Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt
     for specific details about the offset property.
 
 - reg: Address and length of the register set for the device. Only one
diff --git a/Documentation/devicetree/bindings/gpio/gpio-uniphier.txt b/Documentation/devicetree/bindings/gpio/gpio-uniphier.txt
deleted file mode 100644
index f281f12..0000000
--- a/Documentation/devicetree/bindings/gpio/gpio-uniphier.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-UniPhier GPIO controller
-
-Required properties:
-- compatible: Should be "socionext,uniphier-gpio".
-- reg: Specifies offset and length of the register set for the device.
-- gpio-controller: Marks the device node as a GPIO controller.
-- #gpio-cells: Should be 2.  The first cell is the pin number and the second
-  cell is used to specify optional parameters.
-- interrupt-controller: Marks the device node as an interrupt controller.
-- #interrupt-cells: Should be 2.  The first cell defines the interrupt number.
-  The second cell bits[3:0] is used to specify trigger type as follows:
-    1 = low-to-high edge triggered
-    2 = high-to-low edge triggered
-    4 = active high level-sensitive
-    8 = active low level-sensitive
-  Valid combinations are 1, 2, 3, 4, 8.
-- ngpios: Specifies the number of GPIO lines.
-- gpio-ranges: Mapping to pin controller pins (as described in gpio.txt)
-- socionext,interrupt-ranges: Specifies an interrupt number mapping between
-  this GPIO controller and its interrupt parent, in the form of arbitrary
-  number of <child-interrupt-base parent-interrupt-base length> triplets.
-
-Optional properties:
-- gpio-ranges-group-names: Used for named gpio ranges (as described in gpio.txt)
-
-Example:
-	gpio: gpio@55000000 {
-		compatible = "socionext,uniphier-gpio";
-		reg = <0x55000000 0x200>;
-		interrupt-parent = <&aidet>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-ranges = <&pinctrl 0 0 0>;
-		gpio-ranges-group-names = "gpio_range";
-		ngpios = <248>;
-		socionext,interrupt-ranges = <0 48 16>, <16 154 5>, <21 217 3>;
-	};
-
-Consumer Example:
-
-	sdhci0_pwrseq {
-		compatible = "mmc-pwrseq-emmc";
-		reset-gpios = <&gpio UNIPHIER_GPIO_PORT(29, 4) GPIO_ACTIVE_LOW>;
-	};
-
-Please note UNIPHIER_GPIO_PORT(29, 4) represents PORT294 in the SoC document.
-Unfortunately, only the one's place is octal in the port numbering.  (That is,
-PORT 8, 9, 18, 19, 28, 29, ... are missing.)  UNIPHIER_GPIO_PORT() is a helper
-macro to calculate 29 * 8 + 4.
diff --git a/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
new file mode 100644
index 0000000..c58ff9a
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/socionext,uniphier-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier GPIO controller
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+properties:
+  $nodename:
+    pattern: "^gpio@[0-9a-f]+$"
+
+  compatible:
+    const: socionext,uniphier-gpio
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    description: |
+      The first cell defines the interrupt number.
+      The second cell bits[3:0] is used to specify trigger type as follows:
+        1 = low-to-high edge triggered
+        2 = high-to-low edge triggered
+        4 = active high level-sensitive
+        8 = active low level-sensitive
+      Valid combinations are 1, 2, 3, 4, 8.
+    const: 2
+
+  ngpios:
+    minimum: 0
+    maximum: 512
+
+  gpio-ranges: true
+
+  gpio-ranges-group-names:
+    $ref: /schemas/types.yaml#/definitions/string-array
+
+  socionext,interrupt-ranges:
+    description: |
+      Specifies an interrupt number mapping between this GPIO controller and
+      its interrupt parent, in the form of arbitrary number of
+      <child-interrupt-base parent-interrupt-base length> triplets.
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+  - interrupt-controller
+  - "#interrupt-cells"
+  - ngpios
+  - gpio-ranges
+  - socionext,interrupt-ranges
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/gpio/uniphier-gpio.h>
+
+    gpio: gpio@55000000 {
+        compatible = "socionext,uniphier-gpio";
+        reg = <0x55000000 0x200>;
+        interrupt-parent = <&aidet>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&pinctrl 0 0 0>;
+        gpio-ranges-group-names = "gpio_range";
+        ngpios = <248>;
+        socionext,interrupt-ranges = <0 48 16>, <16 154 5>, <21 217 3>;
+    };
+
+    // Consumer:
+    // Please note UNIPHIER_GPIO_PORT(29, 4) represents PORT294 in the SoC
+    // document. Unfortunately, only the one's place is octal in the port
+    // numbering. (That is, PORT 8, 9, 18, 19, 28, 29, ... do not exist.)
+    // UNIPHIER_GPIO_PORT() is a helper macro to calculate 29 * 8 + 4.
+    sdhci0_pwrseq {
+        compatible = "mmc-pwrseq-emmc";
+        reset-gpios = <&gpio UNIPHIER_GPIO_PORT(29, 4) GPIO_ACTIVE_LOW>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml b/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml
index d102888..a36aec2 100644
--- a/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml
@@ -49,6 +49,8 @@
   - "#gpio-cells"
   - gpio-controller
 
+additionalProperties: false
+
 examples:
   - |
     logicvc: logicvc@43c00000 {
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
index e8b99ad..0b229a7 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
@@ -43,6 +43,9 @@
 
   operating-points-v2: true
 
+  resets:
+    maxItems: 2
+
 required:
   - compatible
   - reg
@@ -50,6 +53,8 @@
   - interrupt-names
   - clocks
 
+additionalProperties: false
+
 allOf:
   - if:
       properties:
@@ -57,9 +62,6 @@
           contains:
             const: amlogic,meson-g12a-mali
     then:
-      properties:
-        resets:
-          minItems: 2
       required:
         - resets
 
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
index 8d966f3..0407e45 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
@@ -75,6 +75,9 @@
 
   mali-supply: true
 
+  power-domains:
+    maxItems: 1
+
   resets:
     minItems: 1
     maxItems: 2
@@ -91,6 +94,8 @@
   - interrupt-names
   - clocks
 
+additionalProperties: false
+
 allOf:
   - if:
       properties:
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
index afde81b..f5401cc 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
@@ -115,6 +115,8 @@
   - clocks
   - clock-names
 
+additionalProperties: false
+
 allOf:
   - if:
       properties:
diff --git a/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml b/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
index f4dfa6f..665c6e3 100644
--- a/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
+++ b/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
@@ -36,6 +36,8 @@
   - clocks
   - clock-names
 
+additionalProperties: false
+
 examples:
   - |
     rotator@12810000 {
diff --git a/Documentation/devicetree/bindings/gpu/vivante,gc.yaml b/Documentation/devicetree/bindings/gpu/vivante,gc.yaml
new file mode 100644
index 0000000..0bc4b38
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/vivante,gc.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/vivante,gc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Vivante GPU Bindings
+
+description: Vivante GPU core devices
+
+maintainers:
+  -  Lucas Stach <l.stach@pengutronix.de>
+
+properties:
+  compatible:
+    const: vivante,gc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: AXI/master interface clock
+      - description: GPU core clock
+      - description: Shader clock (only required if GPU has feature PIPE_3D)
+      - description: AHB/slave interface clock (only required if GPU can gate slave interface independently)
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    items:
+      enum: [ bus, core, shader, reg ]
+    minItems: 1
+    maxItems: 4
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    gpu@130000 {
+      compatible = "vivante,gc";
+      reg = <0x00130000 0x4000>;
+      interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&clks IMX6QDL_CLK_GPU3D_AXI>,
+               <&clks IMX6QDL_CLK_GPU3D_CORE>,
+               <&clks IMX6QDL_CLK_GPU3D_SHADER>;
+      clock-names = "bus", "core", "shader";
+      power-domains = <&gpc 1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
index 2a98220..154bee8 100644
--- a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
@@ -47,6 +47,8 @@
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
index 57a240d..7db7876 100644
--- a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
@@ -2,7 +2,7 @@
 # Copyright 2019 Analog Devices Inc.
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/bindings/hwmon/adi,axi-fan-control.yaml#
+$id: http://devicetree.org/schemas/hwmon/adi,axi-fan-control.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Analog Devices AXI FAN Control Device Tree Bindings
@@ -47,7 +47,7 @@
 
 examples:
   - |
-    fpga_axi: fpga-axi@0 {
+    fpga_axi: fpga-axi {
             #address-cells = <0x2>;
             #size-cells = <0x1>;
 
diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
index 6a742a5..44a63ff 100644
--- a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
@@ -87,6 +87,8 @@
   - reg
 
 
+additionalProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
index 7698503..46c4415 100644
--- a/Documentation/devicetree/bindings/hwmon/adt7475.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/adt7475.yaml#
+$id: http://devicetree.org/schemas/hwmon/adt7475.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: ADT7475 hwmon sensor
diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml
index 5d42e13..e8feee3 100644
--- a/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml
+++ b/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml
@@ -32,6 +32,8 @@
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     i2c {
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
index 168235a..3f043e9 100644
--- a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
+++ b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
@@ -76,6 +76,8 @@
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     i2c {
diff --git a/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml b/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml
new file mode 100644
index 0000000..edbca24
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/brcm,brcmstb-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom STB BSC IIC Master Controller
+
+maintainers:
+  - Kamal Dasu <kdasu.kdev@gmail.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm2711-hdmi-i2c
+      - brcm,brcmstb-i2c
+      - brcm,brcmper-i2c
+
+  reg:
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: BSC register range
+      - description: Auto-I2C register range
+
+  reg-names:
+    items:
+      - const: bsc
+      - const: auto-i2c
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    maxItems: 1
+
+  clock-frequency:
+    enum:
+      - 46875
+      - 50000
+      - 93750
+      - 97500
+      - 187500
+      - 200000
+      - 375000
+      - 390000
+
+required:
+  - compatible
+  - reg
+  - clock-frequency
+
+unevaluatedProperties: false
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - brcm,bcm2711-hdmi-i2c
+
+then:
+  properties:
+    reg:
+      minItems: 2
+
+  required:
+    - reg-names
+
+else:
+  properties:
+    reg:
+      maxItems: 1
+
+examples:
+  - |
+      bsca: i2c@f0406200 {
+          clock-frequency = <390000>;
+          compatible = "brcm,brcmstb-i2c";
+          interrupt-parent = <&irq0_intc>;
+          reg = <0xf0406200 0x58>;
+          interrupts = <0x18>;
+          interrupt-names = "upg_bsca";
+      };
+
+  - |
+      ddc0: i2c@7ef04500 {
+          compatible = "brcm,bcm2711-hdmi-i2c";
+          reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>;
+          reg-names = "bsc", "auto-i2c";
+          clock-frequency = <390000>;
+      };
+
+...
diff --git a/Documentation/devicetree/bindings/i2c/i2c-at91.txt b/Documentation/devicetree/bindings/i2c/i2c-at91.txt
index d4bad86..96c914e 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-at91.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-at91.txt
@@ -28,8 +28,13 @@
 	"atmel,sama5d4-i2c",
 	"atmel,sama5d2-i2c",
 	"microchip,sam9x60-i2c".
+- scl-gpios: specify the gpio related to SCL pin
+- sda-gpios: specify the gpio related to SDA pin
+- pinctrl: add extra pinctrl to configure i2c pins to gpio function for i2c
+  bus recovery, call it "gpio" state
 - Child nodes conforming to i2c bus binding
 
+
 Examples :
 
 i2c0: i2c@fff84000 {
@@ -64,6 +69,11 @@
 	clocks = <&flx0>;
 	atmel,fifo-size = <16>;
 	i2c-sda-hold-time-ns = <336>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c0>;
+	pinctrl-1 = <&pinctrl_i2c0_gpio>;
+	sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>;
 
 	wm8731: wm8731@1a {
 		compatible = "wm8731";
diff --git a/Documentation/devicetree/bindings/i2c/i2c-brcmstb.txt b/Documentation/devicetree/bindings/i2c/i2c-brcmstb.txt
deleted file mode 100644
index 0380609..0000000
--- a/Documentation/devicetree/bindings/i2c/i2c-brcmstb.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Broadcom stb bsc iic master controller
-
-Required properties:
-
-- compatible: should be "brcm,brcmstb-i2c" or "brcm,brcmper-i2c"
-- clock-frequency: 32-bit decimal value of iic master clock freqency in Hz
-		   valid values are 375000, 390000, 187500, 200000
-		   93750, 97500, 46875 and 50000
-- reg: specifies the base physical address and size of the registers
-
-Optional properties :
-
-- interrupts: specifies the interrupt number, the irq line to be used
-- interrupt-names: Interrupt name string
-
-Example:
-
-bsca: i2c@f0406200 {
-      clock-frequency = <390000>;
-      compatible = "brcm,brcmstb-i2c";
-      interrupt-parent = <&irq0_intc>;
-      reg = <0xf0406200 0x58>;
-      interrupts = <0x18>;
-      interrupt-names = "upg_bsca";
-};
-
diff --git a/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt b/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt
deleted file mode 100644
index 22f2eeb..0000000
--- a/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt
+++ /dev/null
@@ -1,68 +0,0 @@
-* Rockchip RK3xxx I2C controller
-
-This driver interfaces with the native I2C controller present in Rockchip
-RK3xxx SoCs.
-
-Required properties :
-
- - reg : Offset and length of the register set for the device
- - compatible: should be one of the following:
-   - "rockchip,rv1108-i2c": for rv1108
-   - "rockchip,rk3066-i2c": for rk3066
-   - "rockchip,rk3188-i2c": for rk3188
-   - "rockchip,rk3228-i2c": for rk3228
-   - "rockchip,rk3288-i2c": for rk3288
-   - "rockchip,rk3328-i2c", "rockchip,rk3399-i2c": for rk3328
-   - "rockchip,rk3399-i2c": for rk3399
- - interrupts : interrupt number
- - clocks: See ../clock/clock-bindings.txt
-   - For older hardware (rk3066, rk3188, rk3228, rk3288):
-     - There is one clock that's used both to derive the functional clock
-       for the device and as the bus clock.
-   - For newer hardware (rk3399): specified by name
-     - "i2c": This is used to derive the functional clock.
-     - "pclk": This is the bus clock.
-
-Required on RK3066, RK3188 :
-
- - rockchip,grf : the phandle of the syscon node for the general register
-		  file (GRF)
- - on those SoCs an alias with the correct I2C bus ID (bit offset in the GRF)
-   is also required.
-
-Optional properties :
-
- - clock-frequency : SCL frequency to use (in Hz). If omitted, 100kHz is used.
- - i2c-scl-rising-time-ns : Number of nanoseconds the SCL signal takes to rise
-	(t(r) in I2C specification). If not specified this is assumed to be
-	the maximum the specification allows(1000 ns for Standard-mode,
-	300 ns for Fast-mode) which might cause slightly slower communication.
- - i2c-scl-falling-time-ns : Number of nanoseconds the SCL signal takes to fall
-	(t(f) in the I2C specification). If not specified this is assumed to
-	be the maximum the specification allows (300 ns) which might cause
-	slightly slower communication.
- - i2c-sda-falling-time-ns : Number of nanoseconds the SDA signal takes to fall
-	(t(f) in the I2C specification). If not specified we'll use the SCL
-	value since they are the same in nearly all cases.
-
-Example:
-
-aliases {
-	i2c0 = &i2c0;
-}
-
-i2c0: i2c@2002d000 {
-	compatible = "rockchip,rk3188-i2c";
-	reg = <0x2002d000 0x1000>;
-	interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	rockchip,grf = <&grf>;
-
-	clock-names = "i2c";
-	clocks = <&cru PCLK_I2C0>;
-
-	i2c-scl-rising-time-ns = <800>;
-	i2c-scl-falling-time-ns = <100>;
-};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml
new file mode 100644
index 0000000..61eac76
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-rk3x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3xxx I2C controller
+
+description:
+  This driver interfaces with the native I2C controller present in Rockchip
+  RK3xxx SoCs.
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+# Everything else is described in the common file
+properties:
+  compatible:
+    oneOf:
+      - const: rockchip,rv1108-i2c
+      - const: rockchip,rk3066-i2c
+      - const: rockchip,rk3188-i2c
+      - const: rockchip,rk3228-i2c
+      - const: rockchip,rk3288-i2c
+      - const: rockchip,rk3399-i2c
+      - items:
+          - enum:
+            - rockchip,rk3036-i2c
+            - rockchip,rk3368-i2c
+          - const: rockchip,rk3288-i2c
+      - items:
+          - enum:
+            - rockchip,px30-i2c
+            - rockchip,rk3308-i2c
+            - rockchip,rk3328-i2c
+          - const: rockchip,rk3399-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description:
+          For older hardware (rk3066, rk3188, rk3228, rk3288)
+          there is one clock that is used both to derive the functional clock
+          for the device and as the bus clock.
+          For newer hardware (rk3399) this clock is used to derive
+          the functional clock
+      - description:
+          For newer hardware (rk3399) this is the bus clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: i2c
+      - const: pclk
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Required on RK3066, RK3188 the phandle of the syscon node for
+      the general register file (GRF)
+      On those SoCs an alias with the correct I2C bus ID
+      (bit offset in the GRF) is also required.
+
+  clock-frequency:
+    default: 100000
+    description:
+      SCL frequency to use (in Hz). If omitted, 100kHz is used.
+
+  i2c-scl-rising-time-ns:
+    default: 1000
+    description:
+      Number of nanoseconds the SCL signal takes to rise
+      (t(r) in I2C specification). If not specified this is assumed to be
+      the maximum the specification allows(1000 ns for Standard-mode,
+      300 ns for Fast-mode) which might cause slightly slower communication.
+
+  i2c-scl-falling-time-ns:
+    default: 300
+    description:
+      Number of nanoseconds the SCL signal takes to fall
+      (t(f) in the I2C specification). If not specified this is assumed to
+      be the maximum the specification allows (300 ns) which might cause
+      slightly slower communication.
+
+  i2c-sda-falling-time-ns:
+    default: 300
+    description:
+      Number of nanoseconds the SDA signal takes to fall
+      (t(f) in the I2C specification). If not specified we will use the SCL
+      value since they are the same in nearly all cases.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - rockchip,rk3066-i2c
+          - rockchip,rk3188-i2c
+
+then:
+  required:
+    - rockchip,grf
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3188-cru-common.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c0: i2c@2002d000 {
+      compatible = "rockchip,rk3188-i2c";
+      reg = <0x2002d000 0x1000>;
+      interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru PCLK_I2C0>;
+      clock-names = "i2c";
+      rockchip,grf = <&grf>;
+      i2c-scl-falling-time-ns = <100>;
+      i2c-scl-rising-time-ns = <800>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-uniphier-f.txt b/Documentation/devicetree/bindings/i2c/i2c-uniphier-f.txt
deleted file mode 100644
index 27fc6f8..0000000
--- a/Documentation/devicetree/bindings/i2c/i2c-uniphier-f.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-UniPhier I2C controller (FIFO-builtin)
-
-Required properties:
-- compatible: should be "socionext,uniphier-fi2c".
-- #address-cells: should be 1.
-- #size-cells: should be 0.
-- reg: offset and length of the register set for the device.
-- interrupts: a single interrupt specifier.
-- clocks: phandle to the input clock.
-
-Optional properties:
-- clock-frequency: desired I2C bus frequency in Hz.  The maximum supported
-  value is 400000.  Defaults to 100000 if not specified.
-
-Examples:
-
-	i2c0: i2c@58780000 {
-		compatible = "socionext,uniphier-fi2c";
-		reg = <0x58780000 0x80>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <0 41 4>;
-		clocks = <&i2c_clk>;
-		clock-frequency = <100000>;
-	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-uniphier.txt b/Documentation/devicetree/bindings/i2c/i2c-uniphier.txt
deleted file mode 100644
index 26f9d95..0000000
--- a/Documentation/devicetree/bindings/i2c/i2c-uniphier.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-UniPhier I2C controller (FIFO-less)
-
-Required properties:
-- compatible: should be "socionext,uniphier-i2c".
-- #address-cells: should be 1.
-- #size-cells: should be 0.
-- reg: offset and length of the register set for the device.
-- interrupts: a single interrupt specifier.
-- clocks: phandle to the input clock.
-
-Optional properties:
-- clock-frequency: desired I2C bus frequency in Hz.  The maximum supported
-  value is 400000.  Defaults to 100000 if not specified.
-
-Examples:
-
-	i2c0: i2c@58400000 {
-		compatible = "socionext,uniphier-i2c";
-		reg = <0x58400000 0x40>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <0 41 1>;
-		clocks = <&i2c_clk>;
-		clock-frequency = <100000>;
-	};
diff --git a/Documentation/devicetree/bindings/i2c/socionext,uniphier-fi2c.yaml b/Documentation/devicetree/bindings/i2c/socionext,uniphier-fi2c.yaml
new file mode 100644
index 0000000..15abc02
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/socionext,uniphier-fi2c.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/socionext,uniphier-fi2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier I2C controller (FIFO-builtin)
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: socionext,uniphier-fi2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    minimum: 100000
+    maximum: 400000
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - interrupts
+  - clocks
+
+examples:
+  - |
+    i2c0: i2c@58780000 {
+        compatible = "socionext,uniphier-fi2c";
+        reg = <0x58780000 0x80>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        interrupts = <0 41 4>;
+        clocks = <&i2c_clk>;
+        clock-frequency = <100000>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/socionext,uniphier-i2c.yaml b/Documentation/devicetree/bindings/i2c/socionext,uniphier-i2c.yaml
new file mode 100644
index 0000000..ef998de
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/socionext,uniphier-i2c.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/socionext,uniphier-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier I2C controller (FIFO-less)
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: socionext,uniphier-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    minimum: 100000
+    maximum: 400000
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - interrupts
+  - clocks
+
+examples:
+  - |
+    i2c0: i2c@58400000 {
+        compatible = "socionext,uniphier-i2c";
+        reg = <0x58400000 0x40>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        interrupts = <0 41 1>;
+        clocks = <&i2c_clk>;
+        clock-frequency = <100000>;
+    };
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
index c602b6f..d124eba 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
@@ -17,9 +17,13 @@
 
 properties:
   compatible:
-    enum:
-      - adi,adxl345
-      - adi,adxl375
+    oneOf:
+      - items:
+          - const: adi,adxl346
+          - const: adi,adxl345
+      - enum:
+          - adi,adxl345
+          - adi,adxl375
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
index c1c6d6f..8723a33 100644
--- a/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
@@ -36,6 +36,8 @@
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
index 84d25bd..d091303 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
@@ -106,7 +106,6 @@
         spi-cpha;
         clocks = <&ad7192_mclk>;
         clock-names = "mclk";
-        #interrupt-cells = <2>;
         interrupts = <25 0x2>;
         interrupt-parent = <&gpio>;
         dvdd-supply = <&dvdd>;
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
index 9acde6d..a67ba67 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
@@ -67,6 +67,8 @@
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml b/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
index 91ab9c8..77605f1 100644
--- a/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
@@ -53,6 +53,8 @@
   - dout-gpios
   - avdd-supply
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
index 5900999..118809a 100644
--- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
@@ -32,6 +32,8 @@
   - vref-supply
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
index 0ce2904..8ffeceb 100644
--- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
@@ -52,6 +52,8 @@
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
index acf36ee..b162744 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
@@ -69,6 +69,8 @@
   - "#address-cells"
   - "#size-cells"
 
+additionalProperties: false
+
 patternProperties:
   "^filter@[0-9]+$":
     type: object
diff --git a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml
index 19e5393..1fe5615 100644
--- a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml
+++ b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml
@@ -38,6 +38,8 @@
   - compatible
   - vcc-supply
 
+additionalProperties: false
+
 examples:
   - |
     serial {
diff --git a/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml b/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml
index 50a50a0..a93d197 100644
--- a/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml
+++ b/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml
@@ -24,6 +24,8 @@
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     i2c {
diff --git a/Documentation/devicetree/bindings/iio/dac/ad5755.txt b/Documentation/devicetree/bindings/iio/dac/ad5755.txt
index f0bbd7e..502e1e5 100644
--- a/Documentation/devicetree/bindings/iio/dac/ad5755.txt
+++ b/Documentation/devicetree/bindings/iio/dac/ad5755.txt
@@ -1,4 +1,4 @@
-* Analog Device AD5755 IIO Multi-Channel DAC Linux Driver
+* Analog Devices AD5755 IIO Multi-Channel DAC Linux Driver
 
 Required properties:
  - compatible: Has to contain one of the following:
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
index d9c25cf..58d81ca 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
@@ -2,7 +2,7 @@
 # Copyright 2020 Analog Devices Inc.
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/bindings/iio/dac/adi,ad5770r.yaml#
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5770r.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Analog Devices AD5770R DAC device driver
@@ -49,93 +49,86 @@
       asserted during driver probe.
     maxItems: 1
 
-  channel0:
+  channel@0:
     description: Represents an external channel which are
       connected to the DAC. Channel 0 can act both as a current
       source and sink.
     type: object
 
     properties:
-      num:
+      reg:
         description: This represents the channel number.
-        items:
-          const: 0
+        const: 0
 
       adi,range-microamp:
           description: Output range of the channel.
           oneOf:
-            - $ref: /schemas/types.yaml#/definitions/int32-array
             - items:
-                - enum: [0 300000]
-                - enum: [-60000 0]
-                - enum: [-60000 300000]
+                - const: 0
+                - const: 300000
+            - items:
+                - const: -60000
+                - const: 0
+            - items:
+                - const: -60000
+                - const: 300000
 
-  channel1:
+  channel@1:
     description: Represents an external channel which are
       connected to the DAC.
     type: object
 
     properties:
-      num:
+      reg:
         description: This represents the channel number.
-        items:
-          const: 1
+        const: 1
 
       adi,range-microamp:
           description: Output range of the channel.
-          oneOf:
-            - $ref: /schemas/types.yaml#/definitions/uint32-array
-            - items:
-                - enum: [0 140000]
-                - enum: [0 250000]
+          items:
+            - const: 0
+            - enum: [ 140000, 250000 ]
 
-  channel2:
+  channel@2:
     description: Represents an external channel which are
       connected to the DAC.
     type: object
 
     properties:
-      num:
+      reg:
         description: This represents the channel number.
-        items:
-          const: 2
+        const: 2
 
       adi,range-microamp:
           description: Output range of the channel.
-          oneOf:
-            - $ref: /schemas/types.yaml#/definitions/uint32-array
-            - items:
-                - enum: [0 140000]
-                - enum: [0 250000]
+          items:
+            - const: 0
+            - enum: [ 55000, 150000 ]
 
 patternProperties:
   "^channel@([3-5])$":
     type: object
     description: Represents the external channels which are connected to the DAC.
     properties:
-      num:
+      reg:
         description: This represents the channel number.
-        items:
-          minimum: 3
-          maximum: 5
+        minimum: 3
+        maximum: 5
 
       adi,range-microamp:
           description: Output range of the channel.
-          oneOf:
-            - $ref: /schemas/types.yaml#/definitions/uint32-array
-            - items:
-                - enum: [0 45000]
-                - enum: [0 100000]
+          items:
+            - const: 0
+            - enum: [ 45000, 100000 ]
 
 required:
 - reg
-- diff-channels
-- channel0
-- channel1
-- channel2
-- channel3
-- channel4
-- channel5
+- channel@0
+- channel@1
+- channel@2
+- channel@3
+- channel@4
+- channel@5
 
 examples:
   - |
@@ -144,40 +137,42 @@
                 #size-cells = <0>;
 
                 ad5770r@0 {
-                        compatible = "ad5770r";
+                        compatible = "adi,ad5770r";
                         reg = <0>;
                         spi-max-frequency = <1000000>;
                         vref-supply = <&vref>;
                         adi,external-resistor;
                         reset-gpios = <&gpio 22 0>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
 
                         channel@0 {
-                                num = <0>;
-                                adi,range-microamp = <(-60000) 300000>;
+                                reg = <0>;
+                                adi,range-microamp = <0 300000>;
                         };
 
                         channel@1 {
-                                num = <1>;
+                                reg = <1>;
                                 adi,range-microamp = <0 140000>;
                         };
 
                         channel@2 {
-                                num = <2>;
+                                reg = <2>;
                                 adi,range-microamp = <0 55000>;
                         };
 
                         channel@3 {
-                                num = <3>;
+                                reg = <3>;
                                 adi,range-microamp = <0 45000>;
                         };
 
                         channel@4 {
-                                num = <4>;
+                                reg = <4>;
                                 adi,range-microamp = <0 45000>;
                         };
 
                         channel@5 {
-                                num = <5>;
+                                reg = <5>;
                                 adi,range-microamp = <0 45000>;
                         };
                 };
diff --git a/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml b/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml
index a285eab..e51a585 100644
--- a/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml
@@ -34,6 +34,8 @@
   - reg
   - vref-supply
 
+additionalProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/light/adux1020.yaml b/Documentation/devicetree/bindings/iio/light/adux1020.yaml
index 69bd5c0..d7d14f2 100644
--- a/Documentation/devicetree/bindings/iio/light/adux1020.yaml
+++ b/Documentation/devicetree/bindings/iio/light/adux1020.yaml
@@ -28,6 +28,8 @@
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/iio/light/bh1750.yaml b/Documentation/devicetree/bindings/iio/light/bh1750.yaml
index 1cc60d7..1a88b3c 100644
--- a/Documentation/devicetree/bindings/iio/light/bh1750.yaml
+++ b/Documentation/devicetree/bindings/iio/light/bh1750.yaml
@@ -28,6 +28,8 @@
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     i2c {
diff --git a/Documentation/devicetree/bindings/iio/light/isl29018.yaml b/Documentation/devicetree/bindings/iio/light/isl29018.yaml
index cbb00be..0ea278b 100644
--- a/Documentation/devicetree/bindings/iio/light/isl29018.yaml
+++ b/Documentation/devicetree/bindings/iio/light/isl29018.yaml
@@ -38,6 +38,8 @@
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/iio/light/noa1305.yaml b/Documentation/devicetree/bindings/iio/light/noa1305.yaml
index 17e7f14..fe7bfe1 100644
--- a/Documentation/devicetree/bindings/iio/light/noa1305.yaml
+++ b/Documentation/devicetree/bindings/iio/light/noa1305.yaml
@@ -29,6 +29,8 @@
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     i2c {
diff --git a/Documentation/devicetree/bindings/iio/light/stk33xx.yaml b/Documentation/devicetree/bindings/iio/light/stk33xx.yaml
index aae8a6d..f92bf7b 100644
--- a/Documentation/devicetree/bindings/iio/light/stk33xx.yaml
+++ b/Documentation/devicetree/bindings/iio/light/stk33xx.yaml
@@ -30,6 +30,8 @@
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/iio/light/tsl2583.yaml b/Documentation/devicetree/bindings/iio/light/tsl2583.yaml
index e86ef64..7b92ba8 100644
--- a/Documentation/devicetree/bindings/iio/light/tsl2583.yaml
+++ b/Documentation/devicetree/bindings/iio/light/tsl2583.yaml
@@ -32,6 +32,8 @@
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     i2c {
diff --git a/Documentation/devicetree/bindings/iio/light/tsl2772.yaml b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml
index ed2c3d5..e8f7d1a 100644
--- a/Documentation/devicetree/bindings/iio/light/tsl2772.yaml
+++ b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml
@@ -62,6 +62,8 @@
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/iio/light/veml6030.yaml b/Documentation/devicetree/bindings/iio/light/veml6030.yaml
index 0ff9b11..fb19a2d 100644
--- a/Documentation/devicetree/bindings/iio/light/veml6030.yaml
+++ b/Documentation/devicetree/bindings/iio/light/veml6030.yaml
@@ -45,6 +45,8 @@
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
index 9f5ca9c..64c18f1 100644
--- a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
+++ b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
@@ -33,6 +33,8 @@
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
index 519137e..49257f9 100644
--- a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
+++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
@@ -25,6 +25,9 @@
       - bosch,bmp280
       - bosch,bme280
 
+  reg:
+    maxItems: 1
+
   vddd-supply:
     description:
       digital voltage regulator (see regulator/regulator.txt)
@@ -49,6 +52,8 @@
   - vddd-supply
   - vdda-supply
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
index 8afbac2..f86f8b2 100644
--- a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
+++ b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
@@ -74,6 +74,8 @@
   - trig-gpios
   - echo-gpios
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml b/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml
index a079c99..ada55f1 100644
--- a/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml
+++ b/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml
@@ -42,6 +42,8 @@
   - compatible
   - ping-gpios
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
index d4922f9..8fb46de 100644
--- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
@@ -123,12 +123,11 @@
           sign.
         allOf:
           - $ref: /schemas/types.yaml#/definitions/uint64-matrix
+        minItems: 3
+        maxItems: 64
         items:
-          minItems: 3
-          maxItems: 64
-          items:
-            minItems: 2
-            maxItems: 2
+          minItems: 2
+          maxItems: 2
 
   "^diode@":
     type: object
@@ -328,12 +327,11 @@
           78 and 79.
         allOf:
           - $ref: /schemas/types.yaml#/definitions/uint64-matrix
+        minItems: 3
+        maxItems: 64
         items:
-          minItems: 3
-          maxItems: 64
-          items:
-            minItems: 2
-            maxItems: 2
+          minItems: 2
+          maxItems: 2
 
       adi,custom-steinhart:
         description:
@@ -398,6 +396,8 @@
   - reg
   - interrupts
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
@@ -463,16 +463,16 @@
                         adi,sensor-type = <9>; //custom thermocouple
                         adi,single-ended;
                         adi,custom-thermocouple = /bits/ 64
-                                 <(-50220000) 0
-                                  (-30200000) 99100000
-                                  (-5300000) 135400000
-                                  0 273150000
-                                  40200000 361200000
-                                  55300000 522100000
-                                  88300000 720300000
-                                  132200000 811200000
-                                  188700000 922500000
-                                  460400000 1000000000>; //10 pairs
+                                 <(-50220000) 0>,
+                                 <(-30200000) 99100000>,
+                                 <(-5300000) 135400000>,
+                                 <0 273150000>,
+                                 <40200000 361200000>,
+                                 <55300000 522100000>,
+                                 <88300000 720300000>,
+                                 <132200000 811200000>,
+                                 <188700000 922500000>,
+                                 <460400000 1000000000>; //10 pairs
                };
 
         };
diff --git a/Documentation/devicetree/bindings/input/gpio-vibrator.yaml b/Documentation/devicetree/bindings/input/gpio-vibrator.yaml
index b98bf93..2384465 100644
--- a/Documentation/devicetree/bindings/input/gpio-vibrator.yaml
+++ b/Documentation/devicetree/bindings/input/gpio-vibrator.yaml
@@ -26,6 +26,8 @@
   - compatible
   - enable-gpios
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/input/iqs62x-keys.yaml b/Documentation/devicetree/bindings/input/iqs62x-keys.yaml
new file mode 100644
index 0000000..5625c22
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/iqs62x-keys.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/iqs62x-keys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Azoteq IQS620A/621/622/624/625 Keys and Switches
+
+maintainers:
+  - Jeff LaBundy <jeff@labundy.com>
+
+description: |
+  The Azoteq IQS620A, IQS621, IQS622, IQS624 and IQS625 multi-function sensors
+  feature a variety of self-capacitive, mutual-inductive and Hall-effect sens-
+  ing capabilities that can facilitate a variety of contactless key and switch
+  applications.
+
+  These functions are collectively represented by a "keys" child node from the
+  parent MFD driver. See Documentation/devicetree/bindings/mfd/iqs62x.yaml for
+  further details and examples. Sensor hardware configuration (self-capacitive
+  vs. mutual-inductive, etc.) is selected based on the device's firmware.
+
+properties:
+  compatible:
+    enum:
+      - azoteq,iqs620a-keys
+      - azoteq,iqs621-keys
+      - azoteq,iqs622-keys
+      - azoteq,iqs624-keys
+      - azoteq,iqs625-keys
+
+  linux,keycodes:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+      - minItems: 1
+        maxItems: 16
+    description: |
+      Specifies the numeric keycodes associated with each available touch or
+      proximity event according to the following table. An 'x' indicates the
+      event is supported for a given device. Specify 0 for unused events.
+
+      -------------------------------------------------------------------------
+      | #  | Event              | IQS620A | IQS621 | IQS622 | IQS624 | IQS625 |
+      -------------------------------------------------------------------------
+      | 0  | CH0 Touch          |    x    |    x   |    x   |    x   |    x   |
+      |    | Antenna 1 Touch*   |    x    |        |        |        |        |
+      -------------------------------------------------------------------------
+      | 1  | CH0 Proximity      |    x    |    x   |    x   |    x   |    x   |
+      |    | Antenna 1 Prox.*   |    x    |        |        |        |        |
+      -------------------------------------------------------------------------
+      | 2  | CH1 Touch          |    x    |    x   |    x   |    x   |    x   |
+      |    | Ant. 1 Deep Touch* |    x    |        |        |        |        |
+      -------------------------------------------------------------------------
+      | 3  | CH1 Proximity      |    x    |    x   |    x   |    x   |    x   |
+      -------------------------------------------------------------------------
+      | 4  | CH2 Touch          |    x    |        |        |        |        |
+      -------------------------------------------------------------------------
+      | 5  | CH2 Proximity      |    x    |        |        |        |        |
+      |    | Antenna 2 Prox.*   |    x    |        |        |        |        |
+      -------------------------------------------------------------------------
+      | 6  | Metal (+) Touch**  |    x    |    x   |        |        |        |
+      |    | Ant. 2 Deep Touch* |    x    |        |        |        |        |
+      -------------------------------------------------------------------------
+      | 7  | Metal (+) Prox.**  |    x    |    x   |        |        |        |
+      |    | Antenna 2 Touch*   |    x    |        |        |        |        |
+      -------------------------------------------------------------------------
+      | 8  | Metal (-) Touch**  |    x    |    x   |        |        |        |
+      -------------------------------------------------------------------------
+      | 9  | Metal (-) Prox.**  |    x    |    x   |        |        |        |
+      -------------------------------------------------------------------------
+      | 10 | SAR Active***      |    x    |        |    x   |        |        |
+      -------------------------------------------------------------------------
+      | 11 | SAR Quick Rel.***  |    x    |        |    x   |        |        |
+      -------------------------------------------------------------------------
+      | 12 | SAR Movement***    |    x    |        |    x   |        |        |
+      -------------------------------------------------------------------------
+      | 13 | SAR Filter Halt*** |    x    |        |    x   |        |        |
+      -------------------------------------------------------------------------
+      | 14 | Wheel Up           |         |        |        |    x   |        |
+      -------------------------------------------------------------------------
+      | 15 | Wheel Down         |         |        |        |    x   |        |
+      -------------------------------------------------------------------------
+      *   Two-channel SAR. Replaces CH0-2 plus metal touch and proximity events
+          if enabled via firmware.
+      **  "+" and "-" refer to the polarity of a channel's delta (LTA - counts),
+          where "LTA" is defined as the channel's long-term average.
+      *** One-channel SAR. Replaces CH0-2 touch and proximity events if enabled
+          via firmware.
+
+patternProperties:
+  "^hall-switch-(north|south)$":
+    type: object
+    description:
+      Represents north/south-field Hall-effect sensor touch or proximity
+      events. Note that north/south-field orientation is reversed on the
+      IQS620AXzCSR device due to its flip-chip package.
+
+    properties:
+      linux,code:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: Numeric switch code associated with the event.
+
+      azoteq,use-prox:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          If present, specifies that Hall-effect sensor reporting should
+          use the device's wide-range proximity threshold instead of its
+          close-range touch threshold (default).
+
+    required:
+      - linux,code
+
+    additionalProperties: false
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - azoteq,iqs624-keys
+          - azoteq,iqs625-keys
+then:
+  patternProperties:
+    "^hall-switch-(north|south)$": false
+
+required:
+  - compatible
+  - linux,keycodes
+
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/input/max77650-onkey.yaml b/Documentation/devicetree/bindings/input/max77650-onkey.yaml
index 2f2e0b6..3a2ad6e 100644
--- a/Documentation/devicetree/bindings/input/max77650-onkey.yaml
+++ b/Documentation/devicetree/bindings/input/max77650-onkey.yaml
@@ -33,3 +33,6 @@
 
 required:
   - compatible
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt b/Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt
deleted file mode 100644
index eb8e837..0000000
--- a/Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-STMicroelectronics STPMIC1 Onkey
-
-Required properties:
-
-- compatible = "st,stpmic1-onkey";
-- interrupts: interrupt line to use
-- interrupt-names = "onkey-falling", "onkey-rising"
-	onkey-falling: happens when onkey is pressed; IT_PONKEY_F of pmic
-	onkey-rising: happens when onkey is released; IT_PONKEY_R of pmic
-
-Optional properties:
-
-- st,onkey-clear-cc-flag: onkey is able power on after an
-  over-current shutdown event.
-- st,onkey-pu-inactive: onkey pull up is not active
-- power-off-time-sec: Duration in seconds which the key should be kept
-        pressed for device to power off automatically (from 1 to 16 seconds).
-        see See Documentation/devicetree/bindings/input/input.yaml
-
-Example:
-
-onkey {
-	compatible = "st,stpmic1-onkey";
-	interrupt-parent = <&pmic>;
-	interrupts = <IT_PONKEY_F 0>,<IT_PONKEY_R 1>;
-	interrupt-names = "onkey-falling", "onkey-rising";
-	power-off-time-sec = <10>;
-};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
deleted file mode 100644
index 0e57315..0000000
--- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
+++ /dev/null
@@ -1,77 +0,0 @@
-FocalTech EDT-FT5x06 Polytouch driver
-=====================================
-
-There are 5 variants of the chip for various touch panel sizes
-FT5206GE1  2.8" .. 3.8"
-FT5306DE4  4.3" .. 7"
-FT5406EE8  7"   .. 8.9"
-FT5506EEG  7"   .. 8.9"
-FT5726NEI  5.7” .. 11.6"
-
-The software interface is identical for all those chips, so that
-currently there is no need for the driver to distinguish between the
-different chips. Nevertheless distinct compatible strings are used so
-that a distinction can be added if necessary without changing the DT
-bindings.
-
-
-Required properties:
- - compatible:  "edt,edt-ft5206"
-           or:  "edt,edt-ft5306"
-           or:  "edt,edt-ft5406"
-           or:  "edt,edt-ft5506"
-           or:  "evervision,ev-ft5726"
-           or:  "focaltech,ft6236"
-
- - reg:         I2C slave address of the chip (0x38)
- - interrupts:       interrupt specification for the touchdetect
-                     interrupt
-
-Optional properties:
- - reset-gpios: GPIO specification for the RESET input
- - wake-gpios:  GPIO specification for the WAKE input
- - vcc-supply:  Regulator that supplies the touchscreen
-
- - pinctrl-names: should be "default"
- - pinctrl-0:   a phandle pointing to the pin settings for the
-                control gpios
-
- - wakeup-source: If present the device will act as wakeup-source
-
- - threshold:   allows setting the "click"-threshold in the range
-                from 0 to 80.
-
- - gain:        allows setting the sensitivity in the range from 0 to
-                31. Note that lower values indicate higher
-                sensitivity.
-
- - offset:      allows setting the edge compensation in the range from
-                0 to 31.
-
- - offset-x:    Same as offset, but applies only to the horizontal position.
-                Range from 0 to 80, only supported by evervision,ev-ft5726
-                devices.
-
- - offset-y:    Same as offset, but applies only to the vertical position.
-                Range from 0 to 80, only supported by evervision,ev-ft5726
-                devices.
-
- - touchscreen-size-x	   : See touchscreen.txt
- - touchscreen-size-y	   : See touchscreen.txt
- - touchscreen-fuzz-x      : See touchscreen.txt
- - touchscreen-fuzz-y      : See touchscreen.txt
- - touchscreen-inverted-x  : See touchscreen.txt
- - touchscreen-inverted-y  : See touchscreen.txt
- - touchscreen-swapped-x-y : See touchscreen.txt
-
-Example:
-	polytouch: edt-ft5x06@38 {
-		compatible = "edt,edt-ft5406", "edt,edt-ft5x06";
-		reg = <0x38>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&edt_ft5x06_pins>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
-		wake-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;
-	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
new file mode 100644
index 0000000..383d64a
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/edt-ft5x06.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: FocalTech EDT-FT5x06 Polytouch Bindings
+
+description: |
+             There are 5 variants of the chip for various touch panel sizes
+              FT5206GE1  2.8" .. 3.8"
+              FT5306DE4  4.3" .. 7"
+              FT5406EE8  7"   .. 8.9"
+              FT5506EEG  7"   .. 8.9"
+              FT5726NEI  5.7” .. 11.6"
+
+maintainers:
+  - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+allOf:
+  - $ref: touchscreen.yaml#
+  - if:
+     properties:
+       compatible:
+         contains:
+           enum:
+             - evervision,ev-ft5726
+
+    then:
+      properties:
+        offset-x: true
+        offset-y: true
+
+properties:
+  compatible:
+    enum:
+      - edt,edt-ft5206
+      - edt,edt-ft5306
+      - edt,edt-ft5406
+      - edt,edt-ft5506
+      - evervision,ev-ft5726
+      - focaltech,ft6236
+
+  reg:
+    const: 0x38
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  wake-gpios:
+    maxItems: 1
+
+  wakeup-source: true
+
+  vcc-supply:
+    maxItems: 1
+
+  gain:
+    description: Allows setting the sensitivity in the range from 0 to 31.
+                 Note that lower values indicate higher sensitivity.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - minimum: 0
+      - maximum: 31
+
+  offset:
+    description: Allows setting the edge compensation in the range from 0 to 31.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - minimum: 0
+      - maximum: 31
+
+  offset-x:
+    description: Same as offset, but applies only to the horizontal position.
+                 Range from 0 to 80, only supported by evervision,ev-ft5726 devices.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - minimum: 0
+      - maximum: 80
+
+  offset-y:
+    description: Same as offset, but applies only to the vertical position.
+                 Range from 0 to 80, only supported by evervision,ev-ft5726 devices.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - minimum: 0
+      - maximum: 80
+
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-fuzz-x: true
+  touchscreen-fuzz-y: true
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-swapped-x-y: true
+  interrupt-controller: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      edt-ft5x06@38 {
+        compatible = "edt,edt-ft5406";
+        reg = <0x38>;
+        interrupt-parent = <&gpio2>;
+        interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+        reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+        wake-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
index c99ed39..c8ea943 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
@@ -21,6 +21,8 @@
       - goodix,gt911
       - goodix,gt9110
       - goodix,gt912
+      - goodix,gt9147
+      - goodix,gt917s
       - goodix,gt927
       - goodix,gt9271
       - goodix,gt928
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml b/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml
new file mode 100644
index 0000000..5971fc1
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,bcm-voter.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm BCM-Voter Interconnect
+
+maintainers:
+  - Georgi Djakov <georgi.djakov@linaro.org>
+
+description: |
+  The Bus Clock Manager (BCM) is a dedicated hardware accelerator that manages
+  shared system resources by aggregating requests from multiple Resource State
+  Coordinators (RSC). Interconnect providers are able to vote for aggregated
+  thresholds values from consumers by communicating through their respective
+  RSCs.
+
+properties:
+  compatible:
+    enum:
+      - qcom,bcm-voter
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  # Example 1: apps bcm_voter on SDM845 SoC should be defined inside &apps_rsc node
+  # as defined in Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt
+  - |
+
+    apps_bcm_voter: bcm_voter {
+        compatible = "qcom,bcm-voter";
+    };
+
+  # Example 2: disp bcm_voter on SDM845 should be defined inside &disp_rsc node
+  # as defined in Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt
+  - |
+
+    disp_bcm_voter: bcm_voter {
+        compatible = "qcom,bcm-voter";
+    };
+...
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml b/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
new file mode 100644
index 0000000..91f70c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,osm-l3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Operating State Manager (OSM) L3 Interconnect Provider
+
+maintainers:
+  - Sibi Sankar <sibis@codeaurora.org>
+
+description:
+  L3 cache bandwidth requirements on Qualcomm SoCs is serviced by the OSM.
+  The OSM L3 interconnect provider aggregates the L3 bandwidth requests
+  from CPU/GPU and relays it to the OSM.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7180-osm-l3
+      - qcom,sdm845-osm-l3
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: xo clock
+      - description: alternate clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: alternate
+
+  '#interconnect-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#interconnect-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+
+    #define GPLL0               165
+    #define RPMH_CXO_CLK        0
+
+    osm_l3: interconnect@17d41000 {
+      compatible = "qcom,sdm845-osm-l3";
+      reg = <0x17d41000 0x1400>;
+
+      clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+      clock-names = "xo", "alternate";
+
+      #interconnect-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml
new file mode 100644
index 0000000..50f78f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sc7180.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:  Qualcomm SC7180 Network-On-Chip Interconnect
+
+maintainers:
+  - Odelu Kukatla <okukatla@codeaurora.org>
+
+description: |
+   SC7180 interconnect providers support system bandwidth requirements through
+   RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
+   able to communicate with the BCM through the Resource State Coordinator (RSC)
+   associated with each execution environment. Provider nodes must point to at
+   least one RPMh device child node pertaining to their RSC and each provider
+   can map to multiple RPMh resources.
+
+properties:
+  reg:
+    maxItems: 1
+
+  compatible:
+    enum:
+      - qcom,sc7180-aggre1-noc
+      - qcom,sc7180-aggre2-noc
+      - qcom,sc7180-camnoc-virt
+      - qcom,sc7180-compute-noc
+      - qcom,sc7180-config-noc
+      - qcom,sc7180-dc-noc
+      - qcom,sc7180-gem-noc
+      - qcom,sc7180-ipa-virt
+      - qcom,sc7180-mc-virt
+      - qcom,sc7180-mmss-noc
+      - qcom,sc7180-npu-noc
+      - qcom,sc7180-qup-virt
+      - qcom,sc7180-system-noc
+
+  '#interconnect-cells':
+    const: 1
+
+  qcom,bcm-voters:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: |
+      List of phandles to qcom,bcm-voter nodes that are required by
+      this interconnect to send RPMh commands.
+
+  qcom,bcm-voter-names:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description: |
+      Names for each of the qcom,bcm-voters specified.
+
+required:
+  - compatible
+  - reg
+  - '#interconnect-cells'
+  - qcom,bcm-voters
+
+additionalProperties: false
+
+examples:
+  - |
+      #include <dt-bindings/interconnect/qcom,sc7180.h>
+
+      config_noc: interconnect@1500000 {
+            compatible = "qcom,sc7180-config-noc";
+            reg = <0 0x01500000 0 0x28000>;
+            #interconnect-cells = <1>;
+            qcom,bcm-voters = <&apps_bcm_voter>;
+      };
+
+      system_noc: interconnect@1620000 {
+            compatible = "qcom,sc7180-system-noc";
+            reg = <0 0x01620000 0 0x17080>;
+            #interconnect-cells = <1>;
+            qcom,bcm-voters = <&apps_bcm_voter>;
+      };
+
+      mmss_noc: interconnect@1740000 {
+            compatible = "qcom,sc7180-mmss-noc";
+            reg = <0 0x01740000 0 0x1c100>;
+            #interconnect-cells = <1>;
+            qcom,bcm-voters = <&apps_bcm_voter>;
+      };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sdm845.txt b/Documentation/devicetree/bindings/interconnect/qcom,sdm845.txt
deleted file mode 100644
index 5c4f1d9..0000000
--- a/Documentation/devicetree/bindings/interconnect/qcom,sdm845.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Qualcomm SDM845 Network-On-Chip interconnect driver binding
------------------------------------------------------------
-
-SDM845 interconnect providers support system bandwidth requirements through
-RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
-able to communicate with the BCM through the Resource State Coordinator (RSC)
-associated with each execution environment. Provider nodes must reside within
-an RPMh device node pertaining to their RSC and each provider maps to a single
-RPMh resource.
-
-Required properties :
-- compatible : shall contain only one of the following:
-			"qcom,sdm845-rsc-hlos"
-- #interconnect-cells : should contain 1
-
-Examples:
-
-apps_rsc: rsc {
-	rsc_hlos: interconnect {
-		compatible = "qcom,sdm845-rsc-hlos";
-		#interconnect-cells = <1>;
-	};
-};
-
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sdm845.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sdm845.yaml
new file mode 100644
index 0000000..8b087e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,sdm845.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sdm845.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:  Qualcomm SDM845 Network-On-Chip Interconnect
+
+maintainers:
+  - Georgi Djakov <georgi.djakov@linaro.org>
+
+description: |
+   SDM845 interconnect providers support system bandwidth requirements through
+   RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
+   able to communicate with the BCM through the Resource State Coordinator (RSC)
+   associated with each execution environment. Provider nodes must point to at
+   least one RPMh device child node pertaining to their RSC and each provider
+   can map to multiple RPMh resources.
+
+properties:
+  reg:
+    maxItems: 1
+
+  compatible:
+    enum:
+      - qcom,sdm845-aggre1-noc
+      - qcom,sdm845-aggre2-noc
+      - qcom,sdm845-config-noc
+      - qcom,sdm845-dc-noc
+      - qcom,sdm845-gladiator-noc
+      - qcom,sdm845-mem-noc
+      - qcom,sdm845-mmss-noc
+      - qcom,sdm845-system-noc
+
+  '#interconnect-cells':
+    const: 1
+
+  qcom,bcm-voters:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: |
+      List of phandles to qcom,bcm-voter nodes that are required by
+      this interconnect to send RPMh commands.
+
+  qcom,bcm-voter-names:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description: |
+      Names for each of the qcom,bcm-voters specified.
+
+required:
+  - compatible
+  - reg
+  - '#interconnect-cells'
+  - qcom,bcm-voters
+
+additionalProperties: false
+
+examples:
+  - |
+      #include <dt-bindings/interconnect/qcom,sdm845.h>
+
+      mem_noc: interconnect@1380000 {
+             compatible = "qcom,sdm845-mem-noc";
+             reg = <0 0x01380000 0 0x27200>;
+             #interconnect-cells = <1>;
+             qcom,bcm-voters = <&apps_bcm_voter>;
+      };
+
+      mmss_noc: interconnect@1740000 {
+             compatible = "qcom,sdm845-mmss-noc";
+             reg = <0 0x01740000 0 0x1c1000>;
+             #interconnect-cells = <1>;
+             qcom,bcm-voter-names = "apps", "disp";
+             qcom,bcm-voters = <&apps_bcm_voter>, <&disp_bcm_voter>;
+      };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml b/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml
index 507c141..ccc507f 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml
@@ -44,6 +44,8 @@
   - interrupt-controller
   - '#interrupt-cells'
 
+additionalProperties: false
+
 examples:
   - |
     intcon: interrupt-controller@c8003000 {
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
index 9c6b91f..26f1fcf 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
@@ -56,9 +56,8 @@
       cell with zero.
     allOf:
       - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - items:
-          minItems: 4
-          maxItems: 4
+      - minItems: 4
+        maxItems: 4
 
 
 required:
diff --git a/Documentation/devicetree/bindings/interrupt-controller/msi.txt b/Documentation/devicetree/bindings/interrupt-controller/msi.txt
index c60c034..c20b51d 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/msi.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/msi.txt
@@ -98,7 +98,7 @@
 	};
 
 	msi_c: msi-controller@c {
-		reg = <0xb 0xf00>;
+		reg = <0xc 0xf00>;
 		compatible = "vendor-b,another-controller";
 		msi-controller;
 		/* Each device has some unique ID */
diff --git a/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.txt b/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.txt
deleted file mode 100644
index 48e71d3..0000000
--- a/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-UniPhier AIDET
-
-UniPhier AIDET (ARM Interrupt Detector) is an add-on block for ARM GIC (Generic
-Interrupt Controller).  GIC itself can handle only high level and rising edge
-interrupts.  The AIDET provides logic inverter to support low level and falling
-edge interrupts.
-
-Required properties:
-- compatible: Should be one of the following:
-    "socionext,uniphier-ld4-aidet"  - for LD4 SoC
-    "socionext,uniphier-pro4-aidet" - for Pro4 SoC
-    "socionext,uniphier-sld8-aidet" - for sLD8 SoC
-    "socionext,uniphier-pro5-aidet" - for Pro5 SoC
-    "socionext,uniphier-pxs2-aidet" - for PXs2/LD6b SoC
-    "socionext,uniphier-ld11-aidet" - for LD11 SoC
-    "socionext,uniphier-ld20-aidet" - for LD20 SoC
-    "socionext,uniphier-pxs3-aidet" - for PXs3 SoC
-- reg: Specifies offset and length of the register set for the device.
-- interrupt-controller: Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode an interrupt
-  source.  The value should be 2.  The first cell defines the interrupt number
-  (corresponds to the SPI interrupt number of GIC).  The second cell specifies
-  the trigger type as defined in interrupts.txt in this directory.
-
-Example:
-
-	aidet: aidet@5fc20000 {
-		compatible = "socionext,uniphier-pro4-aidet";
-		reg = <0x5fc20000 0x200>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.yaml b/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.yaml
new file mode 100644
index 0000000..f89ebde
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/socionext,uniphier-aidet.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier AIDET
+
+description: |
+  UniPhier AIDET (ARM Interrupt Detector) is an add-on block for ARM GIC
+  (Generic Interrupt Controller). GIC itself can handle only high level and
+  rising edge interrupts. The AIDET provides logic inverter to support low
+  level and falling edge interrupts.
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - socionext,uniphier-ld4-aidet
+      - socionext,uniphier-pro4-aidet
+      - socionext,uniphier-sld8-aidet
+      - socionext,uniphier-pro5-aidet
+      - socionext,uniphier-pxs2-aidet
+      - socionext,uniphier-ld6b-aidet
+      - socionext,uniphier-ld11-aidet
+      - socionext,uniphier-ld20-aidet
+      - socionext,uniphier-pxs3-aidet
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description: |
+      The first cell defines the interrupt number (corresponds to the SPI
+      interrupt number of GIC). The second cell specifies the trigger type as
+      defined in interrupts.txt in this directory.
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@5fc20000 {
+        compatible = "socionext,uniphier-pro4-aidet";
+        reg = <0x5fc20000 0x200>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml
index 7cdd3aa..0e33cd9 100644
--- a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml
+++ b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml
@@ -80,6 +80,8 @@
   - clock-names
   - "#iommu-cells"
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/exynos5250.h>
diff --git a/Documentation/devicetree/bindings/ipmi/aspeed-kcs-bmc.txt b/Documentation/devicetree/bindings/ipmi/aspeed-kcs-bmc.txt
index d98a9bf..193e71c 100644
--- a/Documentation/devicetree/bindings/ipmi/aspeed-kcs-bmc.txt
+++ b/Documentation/devicetree/bindings/ipmi/aspeed-kcs-bmc.txt
@@ -1,9 +1,10 @@
-* Aspeed KCS (Keyboard Controller Style) IPMI interface
+# Aspeed KCS (Keyboard Controller Style) IPMI interface
 
 The Aspeed SOCs (AST2400 and AST2500) are commonly used as BMCs
 (Baseboard Management Controllers) and the KCS interface can be
 used to perform in-band IPMI communication with their host.
 
+## v1
 Required properties:
 - compatible : should be one of
     "aspeed,ast2400-kcs-bmc"
@@ -12,14 +13,21 @@
 - kcs_chan : The LPC channel number in the controller
 - kcs_addr : The host CPU IO map address
 
+## v2
+Required properties:
+- compatible : should be one of
+    "aspeed,ast2400-kcs-bmc-v2"
+    "aspeed,ast2500-kcs-bmc-v2"
+- reg : The address and size of the IDR, ODR and STR registers
+- interrupts : interrupt generated by the controller
+- aspeed,lpc-io-reg : The host CPU LPC IO address for the device
 
 Example:
 
-    kcs3: kcs3@0 {
-        compatible = "aspeed,ast2500-kcs-bmc";
-        reg = <0x0 0x80>;
+    kcs3: kcs@24 {
+        compatible = "aspeed,ast2500-kcs-bmc-v2";
+        reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
+        aspeed,lpc-reg = <0xca2>;
         interrupts = <8>;
-        kcs_chan = <3>;
-        kcs_addr = <0xCA2>;
         status = "okay";
     };
diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml
index c60b994..4c270fd 100644
--- a/Documentation/devicetree/bindings/leds/common.yaml
+++ b/Documentation/devicetree/bindings/leds/common.yaml
@@ -167,13 +167,13 @@
     led-controller {
         compatible = "gpio-leds";
 
-        led0 {
+        led-0 {
             function = LED_FUNCTION_STATUS;
             linux,default-trigger = "heartbeat";
             gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
         };
 
-        led1 {
+        led-1 {
             function = LED_FUNCTION_USB;
             gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
             trigger-sources = <&ohci_port1>, <&ehci_port1>;
diff --git a/Documentation/devicetree/bindings/leds/leds-max77650.yaml b/Documentation/devicetree/bindings/leds/leds-max77650.yaml
index 8c43f1e..c6f96ca 100644
--- a/Documentation/devicetree/bindings/leds/leds-max77650.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-max77650.yaml
@@ -49,3 +49,6 @@
   - compatible
   - "#address-cells"
   - "#size-cells"
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml
index b50f4bc..90edf9d 100644
--- a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml
+++ b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml
@@ -50,3 +50,6 @@
 
 required:
   - compatible
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml b/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml
index 3192805..aa2b3bf 100644
--- a/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml
+++ b/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml
@@ -41,6 +41,8 @@
   - interrupts
   - "#mbox-cells"
 
+additionalProperties: false
+
 examples:
   - |
     mailbox@c883c404 {
diff --git a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
index 335717e..37d77e0 100644
--- a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
+++ b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
@@ -124,6 +124,8 @@
   - amlogic,ao-sysctrl
   - amlogic,canvas
 
+additionalProperties: false
+
 examples:
   - |
     vdec: video-decoder@c8820000 {
diff --git a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml b/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
index 4119757..95ffa8b 100644
--- a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
+++ b/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
@@ -24,6 +24,12 @@
   reg:
     maxItems: 1
 
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    maxItems: 1
+
   interrupts:
     maxItems: 1
 
@@ -47,7 +53,6 @@
             - description: AO-CEC clock
 
         clock-names:
-          maxItems: 1
           items:
             - const: core
 
@@ -66,7 +71,6 @@
             - description: AO-CEC clock generator source
 
         clock-names:
-          maxItems: 1
           items:
             - const: oscin
 
@@ -78,6 +82,8 @@
   - clocks
   - clock-names
 
+additionalProperties: false
+
 examples:
   - |
     cec_AO: cec@100 {
@@ -88,4 +94,3 @@
         clock-names = "core";
         hdmi-phandle = <&hdmi_tx>;
     };
-
diff --git a/Documentation/devicetree/bindings/media/renesas,ceu.yaml b/Documentation/devicetree/bindings/media/renesas,ceu.yaml
index 8e9251a..fcb5f13 100644
--- a/Documentation/devicetree/bindings/media/renesas,ceu.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,ceu.yaml
@@ -59,6 +59,8 @@
   - interrupts
   - port
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git a/Documentation/devicetree/bindings/media/renesas,vin.txt b/Documentation/devicetree/bindings/media/renesas,vin.txt
deleted file mode 100644
index 5eefd62..0000000
--- a/Documentation/devicetree/bindings/media/renesas,vin.txt
+++ /dev/null
@@ -1,217 +0,0 @@
-Renesas R-Car Video Input driver (rcar_vin)
--------------------------------------------
-
-The rcar_vin device provides video input capabilities for the Renesas R-Car
-family of devices.
-
-Each VIN instance has a single parallel input that supports RGB and YUV video,
-with both external synchronization and BT.656 synchronization for the latter.
-Depending on the instance the VIN input is connected to external SoC pins, or
-on Gen3 and RZ/G2 platforms to a CSI-2 receiver.
-
- - compatible: Must be one or more of the following
-   - "renesas,vin-r8a7743" for the R8A7743 device
-   - "renesas,vin-r8a7744" for the R8A7744 device
-   - "renesas,vin-r8a7745" for the R8A7745 device
-   - "renesas,vin-r8a77470" for the R8A77470 device
-   - "renesas,vin-r8a774a1" for the R8A774A1 device
-   - "renesas,vin-r8a774b1" for the R8A774B1 device
-   - "renesas,vin-r8a774c0" for the R8A774C0 device
-   - "renesas,vin-r8a7778" for the R8A7778 device
-   - "renesas,vin-r8a7779" for the R8A7779 device
-   - "renesas,vin-r8a7790" for the R8A7790 device
-   - "renesas,vin-r8a7791" for the R8A7791 device
-   - "renesas,vin-r8a7792" for the R8A7792 device
-   - "renesas,vin-r8a7793" for the R8A7793 device
-   - "renesas,vin-r8a7794" for the R8A7794 device
-   - "renesas,vin-r8a7795" for the R8A7795 device
-   - "renesas,vin-r8a7796" for the R8A7796 device
-   - "renesas,vin-r8a77965" for the R8A77965 device
-   - "renesas,vin-r8a77970" for the R8A77970 device
-   - "renesas,vin-r8a77980" for the R8A77980 device
-   - "renesas,vin-r8a77990" for the R8A77990 device
-   - "renesas,vin-r8a77995" for the R8A77995 device
-   - "renesas,rcar-gen2-vin" for a generic R-Car Gen2 or RZ/G1 compatible
-     device.
-
-   When compatible with the generic version nodes must list the
-   SoC-specific version corresponding to the platform first
-   followed by the generic version.
-
- - reg: the register base and size for the device registers
- - interrupts: the interrupt for the device
- - clocks: Reference to the parent clock
-
-The per-board settings for Gen2 and RZ/G1 platforms:
-
-- port - sub-node describing a single endpoint connected to the VIN
-  from external SoC pins as described in video-interfaces.txt[1].
-  Only the first one will be considered as each vin interface has one
-  input port.
-
-  - Optional properties for endpoint nodes:
-    - hsync-active: see [1] for description. Default is active high.
-    - vsync-active: see [1] for description. Default is active high.
-      If both HSYNC and VSYNC polarities are not specified, embedded
-      synchronization is selected.
-    - field-active-even: see [1] for description. Default is active high.
-    - bus-width: see [1] for description. The selected bus width depends on
-      the SoC type and selected input image format.
-      Valid values are: 8, 10, 12, 16, 24 and 32.
-    - data-shift: see [1] for description. Valid values are 0 and 8.
-    - data-enable-active: polarity of CLKENB signal, see [1] for
-      description. Default is active high.
-
-The per-board settings for Gen3 and RZ/G2 platforms:
-
-Gen3 and RZ/G2 platforms can support both a single connected parallel input
-source from external SoC pins (port@0) and/or multiple parallel input sources
-from local SoC CSI-2 receivers (port@1) depending on SoC.
-
-- renesas,id - ID number of the VIN, VINx in the documentation.
-- ports
-    - port@0 - sub-node describing a single endpoint connected to the VIN
-      from external SoC pins as described in video-interfaces.txt[1].
-      Describing more than one endpoint in port@0 is invalid. Only VIN
-      instances that are connected to external pins should have port@0.
-
-      Endpoint nodes of port@0 support the optional properties listed in
-      the Gen2 per-board settings description.
-
-    - port@1 - sub-nodes describing one or more endpoints connected to
-      the VIN from local SoC CSI-2 receivers. The endpoint numbers must
-      use the following schema.
-
-        - endpoint@0 - sub-node describing the endpoint connected to CSI20
-        - endpoint@1 - sub-node describing the endpoint connected to CSI21
-        - endpoint@2 - sub-node describing the endpoint connected to CSI40
-        - endpoint@3 - sub-node describing the endpoint connected to CSI41
-
-      Endpoint nodes of port@1 do not support any optional endpoint property.
-
-Device node example for Gen2 platforms
---------------------------------------
-
-        aliases {
-                vin0 = &vin0;
-        };
-
-        vin0: vin@e6ef0000 {
-                compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin";
-                clocks = <&mstp8_clks R8A7790_CLK_VIN0>;
-                reg = <0 0xe6ef0000 0 0x1000>;
-                interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>;
-                status = "disabled";
-        };
-
-Board setup example for Gen2 platforms (vin1 composite video input)
--------------------------------------------------------------------
-
-&i2c2   {
-        status = "okay";
-        pinctrl-0 = <&i2c2_pins>;
-        pinctrl-names = "default";
-
-        adv7180@20 {
-                compatible = "adi,adv7180";
-                reg = <0x20>;
-                remote = <&vin1>;
-
-                port {
-                        adv7180: endpoint {
-                                bus-width = <8>;
-                                remote-endpoint = <&vin1ep0>;
-                        };
-                };
-        };
-};
-
-/* composite video input */
-&vin1 {
-        pinctrl-0 = <&vin1_pins>;
-        pinctrl-names = "default";
-
-        status = "okay";
-
-        port {
-                vin1ep0: endpoint {
-                        remote-endpoint = <&adv7180>;
-                        bus-width = <8>;
-                };
-        };
-};
-
-Device node example for Gen3 platforms
---------------------------------------
-
-        vin0: video@e6ef0000 {
-                compatible = "renesas,vin-r8a7795";
-                reg = <0 0xe6ef0000 0 0x1000>;
-                interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
-                clocks = <&cpg CPG_MOD 811>;
-                power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-                resets = <&cpg 811>;
-                renesas,id = <0>;
-
-                ports {
-                        #address-cells = <1>;
-                        #size-cells = <0>;
-
-                        port@1 {
-                                #address-cells = <1>;
-                                #size-cells = <0>;
-
-                                reg = <1>;
-
-                                vin0csi20: endpoint@0 {
-                                        reg = <0>;
-                                        remote-endpoint= <&csi20vin0>;
-                                };
-                                vin0csi21: endpoint@1 {
-                                        reg = <1>;
-                                        remote-endpoint= <&csi21vin0>;
-                                };
-                                vin0csi40: endpoint@2 {
-                                        reg = <2>;
-                                        remote-endpoint= <&csi40vin0>;
-                                };
-                        };
-                };
-        };
-
-        csi20: csi2@fea80000 {
-                compatible = "renesas,r8a7795-csi2";
-                reg = <0 0xfea80000 0 0x10000>;
-                interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-                clocks = <&cpg CPG_MOD 714>;
-                power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-                resets = <&cpg 714>;
-
-                ports {
-                        #address-cells = <1>;
-                        #size-cells = <0>;
-
-                        port@0 {
-                                reg = <0>;
-                                csi20_in: endpoint {
-                                        clock-lanes = <0>;
-                                        data-lanes = <1>;
-                                        remote-endpoint = <&adv7482_txb>;
-                                };
-                        };
-
-                        port@1 {
-                                #address-cells = <1>;
-                                #size-cells = <0>;
-
-                                reg = <1>;
-
-                                csi20vin0: endpoint@0 {
-                                        reg = <0>;
-                                        remote-endpoint = <&vin0csi20>;
-                                };
-                        };
-                };
-        };
-
-[1] video-interfaces.txt common video media interface
diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml
new file mode 100644
index 0000000..1ec947b
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml
@@ -0,0 +1,402 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# Copyright (C) 2020 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/renesas,vin.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Video Input (VIN)
+
+maintainers:
+  - Niklas Söderlund <niklas.soderlund@ragnatech.se>
+
+description:
+  The R-Car Video Input (VIN) device provides video input capabilities for the
+  Renesas R-Car family of devices.
+
+  Each VIN instance has a single parallel input that supports RGB and YUV video,
+  with both external synchronization and BT.656 synchronization for the latter.
+  Depending on the instance the VIN input is connected to external SoC pins, or
+  on Gen3 and RZ/G2 platforms to a CSI-2 receiver.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,vin-r8a7743  # RZ/G1M
+              - renesas,vin-r8a7744  # RZ/G1N
+              - renesas,vin-r8a7745  # RZ/G1E
+              - renesas,vin-r8a77470 # RZ/G1C
+              - renesas,vin-r8a7790  # R-Car H2
+              - renesas,vin-r8a7791  # R-Car M2-W
+              - renesas,vin-r8a7792  # R-Car V2H
+              - renesas,vin-r8a7793  # R-Car M2-N
+              - renesas,vin-r8a7794  # R-Car E2
+          - const: renesas,rcar-gen2-vin # Generic R-Car Gen2 or RZ/G1
+
+      - items:
+          - enum:
+              - renesas,vin-r8a774a1 # RZ/G2M
+              - renesas,vin-r8a774b1 # RZ/G2N
+              - renesas,vin-r8a774c0 # RZ/G2E
+              - renesas,vin-r8a7778  # R-Car M1
+              - renesas,vin-r8a7779  # R-Car H1
+              - renesas,vin-r8a7795  # R-Car H3
+              - renesas,vin-r8a7796  # R-Car M3-W
+              - renesas,vin-r8a77965 # R-Car M3-N
+              - renesas,vin-r8a77970 # R-Car V3M
+              - renesas,vin-r8a77980 # R-Car V3H
+              - renesas,vin-r8a77990 # R-Car E3
+              - renesas,vin-r8a77995 # R-Car D3
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  #The per-board settings for Gen2 and RZ/G1 platforms:
+  port:
+    type: object
+    description:
+      A node containing a parallel input with a single endpoint definitions as
+      documented in
+      Documentation/devicetree/bindings/media/video-interfaces.txt
+
+    properties:
+      endpoint:
+        type: object
+
+        properties:
+          hsync-active:
+            description:
+              If both HSYNC and VSYNC polarities are not specified, embedded
+              synchronization is selected.
+            default: 1
+
+          vsync-active:
+            description:
+              If both HSYNC and VSYNC polarities are not specified, embedded
+              synchronization is selected.
+            default: 1
+
+          field-active-even: true
+
+          bus-width: true
+
+          data-shift: true
+
+          data-enable-active:
+            description: Polarity of CLKENB signal
+            default: 1
+
+          pclk-sample: true
+
+          data-active: true
+
+          remote-endpoint: true
+
+        required:
+          - remote-endpoint
+
+        additionalProperties: false
+
+    additionalProperties: false
+
+  #The per-board settings for Gen3 and RZ/G2 platforms:
+  renesas,id:
+    description: VIN channel number
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - minimum: 0
+      - maximum: 15
+
+  ports:
+    type: object
+    description:
+      A node containing input nodes with endpoint definitions as documented in
+      Documentation/devicetree/bindings/media/video-interfaces.txt
+
+    properties:
+      port@0:
+        type: object
+        description:
+          Input port node, single endpoint describing a parallel input source.
+
+        properties:
+          reg:
+            const: 0
+
+          endpoint:
+            type: object
+
+            properties:
+              hsync-active:
+                description:
+                  If both HSYNC and VSYNC polarities are not specified, embedded
+                  synchronization is selected.
+                default: 1
+
+              vsync-active:
+                description:
+                  If both HSYNC and VSYNC polarities are not specified, embedded
+                  synchronization is selected.
+                default: 1
+
+              field-active-even: true
+
+              bus-width: true
+
+              data-shift: true
+
+              data-enable-active:
+                description: Polarity of CLKENB signal
+                default: 1
+
+              pclk-sample: true
+
+              data-active: true
+
+              remote-endpoint: true
+
+            required:
+              - remote-endpoint
+
+            additionalProperties: false
+
+        required:
+          - endpoint
+
+        additionalProperties: false
+
+      port@1:
+        type: object
+        description:
+          Input port node, multiple endpoints describing all the R-Car CSI-2
+          modules connected the VIN.
+
+        properties:
+          '#address-cells':
+            const: 1
+
+          '#size-cells':
+            const: 0
+
+          reg:
+            const: 1
+
+          endpoint@0:
+            type: object
+            description: Endpoint connected to CSI20.
+
+            properties:
+              reg:
+                const: 0
+
+              remote-endpoint: true
+
+            required:
+              - reg
+              - remote-endpoint
+
+            additionalProperties: false
+
+          endpoint@1:
+            type: object
+            description: Endpoint connected to CSI21.
+
+            properties:
+              reg:
+                const: 1
+
+              remote-endpoint: true
+
+            required:
+              - reg
+              - remote-endpoint
+
+            additionalProperties: false
+
+          endpoint@2:
+            type: object
+            description: Endpoint connected to CSI40.
+
+            properties:
+              reg:
+                const: 2
+
+              remote-endpoint: true
+
+            required:
+              - reg
+              - remote-endpoint
+
+            additionalProperties: false
+
+          endpoint@3:
+            type: object
+            description: Endpoint connected to CSI41.
+
+            properties:
+              reg:
+                const: 3
+
+              remote-endpoint: true
+
+            required:
+              - reg
+              - remote-endpoint
+
+            additionalProperties: false
+
+        anyOf:
+          - required:
+            - endpoint@0
+          - required:
+            - endpoint@1
+          - required:
+            - endpoint@2
+          - required:
+            - endpoint@3
+
+        additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+  - resets
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,vin-r8a7778
+          - renesas,vin-r8a7779
+          - renesas,rcar-gen2-vin
+then:
+  required:
+    - port
+else:
+  required:
+    - renesas,id
+    - ports
+
+additionalProperties: false
+
+examples:
+  # Device node example for Gen2 platform
+  - |
+    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7790-sysc.h>
+
+    vin1: vin@e6ef1000 {
+            compatible = "renesas,vin-r8a7790",
+                         "renesas,rcar-gen2-vin";
+            reg = <0 0xe6ef1000 0 0x1000>;
+            interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 810>;
+            power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+            resets = <&cpg 810>;
+
+            port {
+                    vin1ep0: endpoint {
+                            remote-endpoint = <&adv7180>;
+                            bus-width = <8>;
+                    };
+            };
+    };
+
+  # Device node example for Gen3 platform with only CSI-2
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+
+    vin0: video@e6ef0000 {
+            compatible = "renesas,vin-r8a7795";
+            reg = <0 0xe6ef0000 0 0x1000>;
+            interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 811>;
+            power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+            resets = <&cpg 811>;
+            renesas,id = <0>;
+
+            ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@1 {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            reg = <1>;
+
+                            vin0csi20: endpoint@0 {
+                                    reg = <0>;
+                                    remote-endpoint= <&csi20vin0>;
+                            };
+                            vin0csi40: endpoint@2 {
+                                    reg = <2>;
+                                    remote-endpoint= <&csi40vin0>;
+                            };
+                    };
+            };
+    };
+
+  # Device node example for Gen3 platform with CSI-2 and parallel
+  - |
+    #include <dt-bindings/clock/r8a77970-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a77970-sysc.h>
+
+    vin2: video@e6ef2000 {
+            compatible = "renesas,vin-r8a77970";
+            reg = <0 0xe6ef2000 0 0x1000>;
+            interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 809>;
+            power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+            resets = <&cpg 809>;
+            renesas,id = <2>;
+
+            ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                            reg = <0>;
+
+                            vin2_in: endpoint {
+                                    remote-endpoint = <&adv7612_out>;
+                                    hsync-active = <0>;
+                                    vsync-active = <0>;
+                            };
+                    };
+
+                    port@1 {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            reg = <1>;
+
+                            vin2csi40: endpoint@2 {
+                                    reg = <2>;
+                                    remote-endpoint = <&csi40vin2>;
+                            };
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml
index 12516bd..611bda3 100644
--- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml
@@ -97,30 +97,35 @@
     #include <dt-bindings/clock/tegra186-clock.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-    memory-controller@2c00000 {
-        compatible = "nvidia,tegra186-mc";
-        reg = <0x0 0x02c00000 0x0 0xb0000>;
-        interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
-
+    bus {
         #address-cells = <2>;
         #size-cells = <2>;
 
-        ranges = <0x0 0x02c00000 0x02c00000 0x0 0xb0000>;
+        memory-controller@2c00000 {
+            compatible = "nvidia,tegra186-mc";
+            reg = <0x0 0x02c00000 0x0 0xb0000>;
+            interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
 
-        /*
-         * Memory clients have access to all 40 bits that the memory
-         * controller can address.
-         */
-        dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
+            #address-cells = <2>;
+            #size-cells = <2>;
 
-        external-memory-controller@2c60000 {
-            compatible = "nvidia,tegra186-emc";
-            reg = <0x0 0x02c60000 0x0 0x50000>;
-            interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
-            clocks = <&bpmp TEGRA186_CLK_EMC>;
-            clock-names = "emc";
+            ranges = <0x0 0x02c00000 0x0 0x02c00000 0x0 0xb0000>;
 
-            nvidia,bpmp = <&bpmp>;
+            /*
+             * Memory clients have access to all 40 bits that the memory
+             * controller can address.
+             */
+            dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
+
+            external-memory-controller@2c60000 {
+                compatible = "nvidia,tegra186-emc";
+                reg = <0x0 0x02c60000 0x0 0x50000>;
+                interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&bpmp TEGRA186_CLK_EMC>;
+                clock-names = "emc";
+
+                nvidia,bpmp = <&bpmp>;
+            };
         };
     };
 
diff --git a/Documentation/devicetree/bindings/mfd/iqs62x.yaml b/Documentation/devicetree/bindings/mfd/iqs62x.yaml
new file mode 100644
index 0000000..541b06d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/iqs62x.yaml
@@ -0,0 +1,179 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/iqs62x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Azoteq IQS620A/621/622/624/625 Multi-Function Sensors
+
+maintainers:
+  - Jeff LaBundy <jeff@labundy.com>
+
+description: |
+  The Azoteq IQS620A, IQS621, IQS622, IQS624 and IQS625 multi-function sensors
+  integrate multiple sensing technologies in a single package.
+
+  Link to datasheets: https://www.azoteq.com/
+
+properties:
+  compatible:
+    enum:
+      - azoteq,iqs620a
+      - azoteq,iqs621
+      - azoteq,iqs622
+      - azoteq,iqs624
+      - azoteq,iqs625
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      Specifies the name of the calibration and configuration file selected by
+      the driver. If this property is omitted, the name is chosen based on the
+      device name with ".bin" as the extension (e.g. iqs620a.bin for IQS620A).
+
+  keys:
+    $ref: ../input/iqs62x-keys.yaml
+
+  pwm:
+    $ref: ../pwm/iqs620a-pwm.yaml
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    /*
+     * Dual capacitive buttons with proximity-activated function, unipolar lid
+     * switch and panel-mounted LED.
+     */
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            iqs620a@44 {
+                    compatible = "azoteq,iqs620a";
+                    reg = <0x44>;
+                    interrupt-parent = <&gpio>;
+                    interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+
+                    keys {
+                            compatible = "azoteq,iqs620a-keys";
+
+                            linux,keycodes = <KEY_SELECT>,
+                                             <KEY_MENU>,
+                                             <KEY_OK>,
+                                             <KEY_MENU>;
+
+                            hall-switch-south {
+                                    linux,code = <SW_LID>;
+                                    azoteq,use-prox;
+                            };
+                    };
+
+                    iqs620a_pwm: pwm {
+                            compatible = "azoteq,iqs620a-pwm";
+                            #pwm-cells = <2>;
+                    };
+            };
+    };
+
+    pwmleds {
+            compatible = "pwm-leds";
+
+            panel {
+                    pwms = <&iqs620a_pwm 0 1000000>;
+                    max-brightness = <255>;
+            };
+    };
+
+  - |
+    /* Single inductive button with bipolar dock/tablet-mode switch. */
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            iqs620a@44 {
+                    compatible = "azoteq,iqs620a";
+                    reg = <0x44>;
+                    interrupt-parent = <&gpio>;
+                    interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+
+                    firmware-name = "iqs620a_coil.bin";
+
+                    keys {
+                            compatible = "azoteq,iqs620a-keys";
+
+                            linux,keycodes = <0>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <KEY_MUTE>;
+
+                            hall-switch-north {
+                                    linux,code = <SW_DOCK>;
+                            };
+
+                            hall-switch-south {
+                                    linux,code = <SW_TABLET_MODE>;
+                            };
+                    };
+            };
+    };
+
+  - |
+    /* Dual capacitive buttons with volume knob. */
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            iqs624@44 {
+                    compatible = "azoteq,iqs624";
+                    reg = <0x44>;
+                    interrupt-parent = <&gpio>;
+                    interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+
+                    keys {
+                            compatible = "azoteq,iqs624-keys";
+
+                            linux,keycodes = <BTN_0>,
+                                             <0>,
+                                             <BTN_1>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <KEY_VOLUMEUP>,
+                                             <KEY_VOLUMEDOWN>;
+                    };
+            };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mfd/max77650.yaml b/Documentation/devicetree/bindings/mfd/max77650.yaml
index 4803857..b0a0f0d 100644
--- a/Documentation/devicetree/bindings/mfd/max77650.yaml
+++ b/Documentation/devicetree/bindings/mfd/max77650.yaml
@@ -73,6 +73,8 @@
   - gpio-controller
   - "#gpio-cells"
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/mfd/rn5t618.txt b/Documentation/devicetree/bindings/mfd/rn5t618.txt
index b74e5e9..16778ea 100644
--- a/Documentation/devicetree/bindings/mfd/rn5t618.txt
+++ b/Documentation/devicetree/bindings/mfd/rn5t618.txt
@@ -15,6 +15,8 @@
  - reg: the I2C slave address of the device
 
 Optional properties:
+ - interrupts: interrupt mapping for IRQ
+   See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
  - system-power-controller:
    See Documentation/devicetree/bindings/power/power-controller.txt
 
@@ -32,6 +34,8 @@
 	pmic@32 {
 		compatible = "ricoh,rn5t618";
 		reg = <0x32>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
 		system-power-controller;
 
 		regulators {
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
index 4fbb9e7..3a6a1a2 100644
--- a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
@@ -41,6 +41,9 @@
   "#clock-cells":
     const: 0
 
+  clock-output-names:
+    const: bd71828-32k-out
+
   rohm,charger-sense-resistor-ohms:
     minimum: 10000000
     maximum: 50000000
@@ -74,6 +77,8 @@
   - gpio-controller
   - "#gpio-cells"
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt
deleted file mode 100644
index f22d74c..0000000
--- a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt
+++ /dev/null
@@ -1,90 +0,0 @@
-* ROHM BD71837 and BD71847 Power Management Integrated Circuit bindings
-
-BD71837MWV and BD71847MWV are programmable Power Management ICs for powering
-single-core, dual-core, and quad-core SoCs such as NXP-i.MX 8M. They are
-optimized for low BOM cost and compact solution footprint. BD71837MWV
-integrates 8 Buck regulators and 7 LDOs. BD71847MWV contains 6 Buck regulators
-and 6 LDOs.
-
-Datasheet for BD71837 is available at:
-https://www.rohm.com/datasheet/BD71837MWV/bd71837mwv-e
-Datasheet for BD71847 is available at:
-https://www.rohm.com/datasheet/BD71847AMWV/bd71847amwv-e
-
-Required properties:
- - compatible		: Should be "rohm,bd71837" for bd71837
-				    "rohm,bd71847" for bd71847.
- - reg			: I2C slave address.
- - interrupt-parent	: Phandle to the parent interrupt controller.
- - interrupts		: The interrupt line the device is connected to.
- - clocks		: The parent clock connected to PMIC. If this is missing
-			  32768 KHz clock is assumed.
- - #clock-cells		: Should be 0.
- - regulators:		: List of child nodes that specify the regulators.
-			  Please see ../regulator/rohm,bd71837-regulator.txt
-
-Optional properties:
-- clock-output-names	: Should contain name for output clock.
-- rohm,reset-snvs-powered : Transfer BD718x7 to SNVS state at reset.
-
-The BD718x7 supports two different HW states as reset target states. States
-are called as SNVS and READY. At READY state all the PMIC power outputs go
-down and OTP is reload. At the SNVS state all other logic and external
-devices apart from the SNVS power domain are shut off. Please refer to NXP
-i.MX8 documentation for further information regarding SNVS state. When a
-reset is done via SNVS state the PMIC OTP data is not reload. This causes
-power outputs that have been under SW control to stay down when reset has
-switched power state to SNVS. If reset is done via READY state the power
-outputs will be returned to HW control by OTP loading. Thus the reset
-target state is set to READY by default. If SNVS state is used the boot
-crucial regulators must have the regulator-always-on and regulator-boot-on
-properties set in regulator node.
-
-- rohm,short-press-ms	: Short press duration in milliseconds
-- rohm,long-press-ms	: Long press duration in milliseconds
-
-Configure the "short press" and "long press" timers for the power button.
-Values are rounded to what hardware supports (500ms multiple for short and
-1000ms multiple for long). If these properties are not present the existing
-configuration (from bootloader or OTP) is not touched.
-
-Example:
-
-	/* external oscillator node */
-	osc: oscillator {
-		compatible = "fixed-clock";
-		#clock-cells = <1>;
-		clock-frequency  = <32768>;
-		clock-output-names = "osc";
-	};
-
-	pmic: pmic@4b {
-		compatible = "rohm,bd71837";
-		reg = <0x4b>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <29 GPIO_ACTIVE_LOW>;
-		interrupt-names = "irq";
-		#clock-cells = <0>;
-		clocks = <&osc 0>;
-		clock-output-names = "bd71837-32k-out";
-		rohm,reset-snvs-powered;
-
-		regulators {
-			buck1: BUCK1 {
-				regulator-name = "buck1";
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <1250>;
-			};
-			// [...]
-		};
-	};
-
-	/* Clock consumer node */
-	rtc@0 {
-		compatible = "company,my-rtc";
-		clock-names = "my-clock";
-		clocks = <&pmic>;
-	};
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml
new file mode 100644
index 0000000..65018a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml
@@ -0,0 +1,238 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rohm,bd71837-pmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD71837 Power Management Integrated Circuit bindings
+
+maintainers:
+  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+
+description: |
+  BD71837MWV is programmable Power Management ICs for powering single-core,
+  dual-core, and quad-core SoCs such as NXP-i.MX 8M. It is optimized for low
+  BOM cost and compact solution footprint. BD71837MWV  integrates 8 Buck
+  regulators and 7 LDOs.
+  Datasheet for BD71837 is available at
+  https://www.rohm.com/products/power-management/power-management-ic-for-system/industrial-consumer-applications/nxp-imx/bd71837amwv-product
+
+properties:
+  compatible:
+    const: rohm,bd71837
+
+  reg:
+    description:
+      I2C slave address.
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 0
+
+# The BD718x7 supports two different HW states as reset target states. States
+# are called as SNVS and READY. At READY state all the PMIC power outputs go
+# down and OTP is reload. At the SNVS state all other logic and external
+# devices apart from the SNVS power domain are shut off. Please refer to NXP
+# i.MX8 documentation for further information regarding SNVS state. When a
+# reset is done via SNVS state the PMIC OTP data is not reload. This causes
+# power outputs that have been under SW control to stay down when reset has
+# switched power state to SNVS. If reset is done via READY state the power
+# outputs will be returned to HW control by OTP loading. Thus the reset
+# target state is set to READY by default. If SNVS state is used the boot
+# crucial regulators must have the regulator-always-on and regulator-boot-on
+# properties set in regulator node.
+
+  rohm,reset-snvs-powered:
+    description: |
+      Transfer PMIC to SNVS state at reset
+    type: boolean
+
+# Configure the "short press" and "long press" timers for the power button.
+# Values are rounded to what hardware supports
+# Short-press:
+#   Shortest being 10ms, next 500ms and then multiple of 500ms up to 7,5s
+# Long-press:
+#   Shortest being 10ms, next 1000ms and then multiple of 1000ms up to 15s
+# If these properties are not present the existing configuration (from
+# bootloader or OTP) is not touched.
+
+  rohm,short-press-ms:
+    description:
+      Short press duration in milliseconds
+    enum:
+      - 10
+      - 500
+      - 1000
+      - 1500
+      - 2000
+      - 2500
+      - 3000
+      - 3500
+      - 4000
+      - 4500
+      - 5000
+      - 5500
+      - 6000
+      - 6500
+      - 7000
+
+  rohm,long-press-ms:
+    description:
+      Long press duration in milliseconds
+    enum:
+      - 10
+      - 1000
+      - 2000
+      - 3000
+      - 4000
+      - 5000
+      - 6000
+      - 7000
+      - 8000
+      - 9000
+      - 10000
+      - 11000
+      - 12000
+      - 13000
+      - 14000
+
+  regulators:
+    $ref: ../regulator/rohm,bd71837-regulator.yaml
+    description:
+      List of child nodes that specify the regulators.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - "#clock-cells"
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pmic: pmic@4b {
+            compatible = "rohm,bd71837";
+            reg = <0x4b>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+            #clock-cells = <0>;
+            clocks = <&osc 0>;
+            rohm,reset-snvs-powered;
+            rohm,short-press-ms = <10>;
+            rohm,long-press-ms = <2000>;
+
+            regulators {
+                buck1: BUCK1 {
+                    regulator-name = "buck1";
+                    regulator-min-microvolt = <700000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                    regulator-ramp-delay = <1250>;
+                    rohm,dvs-run-voltage = <900000>;
+                    rohm,dvs-idle-voltage = <850000>;
+                    rohm,dvs-suspend-voltage = <800000>;
+                };
+                buck2: BUCK2 {
+                    regulator-name = "buck2";
+                    regulator-min-microvolt = <700000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                    regulator-ramp-delay = <1250>;
+                    rohm,dvs-run-voltage = <1000000>;
+                    rohm,dvs-idle-voltage = <900000>;
+                };
+                buck3: BUCK3 {
+                    regulator-name = "buck3";
+                    regulator-min-microvolt = <700000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-boot-on;
+                    rohm,dvs-run-voltage = <1000000>;
+                };
+                buck4: BUCK4 {
+                    regulator-name = "buck4";
+                    regulator-min-microvolt = <700000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-boot-on;
+                    rohm,dvs-run-voltage = <1000000>;
+                };
+                buck5: BUCK5 {
+                    regulator-name = "buck5";
+                    regulator-min-microvolt = <700000>;
+                    regulator-max-microvolt = <1350000>;
+                    regulator-boot-on;
+                };
+                buck6: BUCK6 {
+                    regulator-name = "buck6";
+                    regulator-min-microvolt = <3000000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-boot-on;
+                };
+                buck7: BUCK7 {
+                    regulator-name = "buck7";
+                    regulator-min-microvolt = <1605000>;
+                    regulator-max-microvolt = <1995000>;
+                    regulator-boot-on;
+                };
+                buck8: BUCK8 {
+                    regulator-name = "buck8";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1400000>;
+                };
+
+                ldo1: LDO1 {
+                    regulator-name = "ldo1";
+                    regulator-min-microvolt = <3000000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-boot-on;
+                };
+                ldo2: LDO2 {
+                    regulator-name = "ldo2";
+                    regulator-min-microvolt = <900000>;
+                    regulator-max-microvolt = <900000>;
+                    regulator-boot-on;
+                };
+                ldo3: LDO3 {
+                    regulator-name = "ldo3";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+                ldo4: LDO4 {
+                    regulator-name = "ldo4";
+                    regulator-min-microvolt = <900000>;
+                    regulator-max-microvolt = <1800000>;
+                };
+                ldo5: LDO5 {
+                    regulator-name = "ldo5";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+                ldo6: LDO6 {
+                    regulator-name = "ldo6";
+                    regulator-min-microvolt = <900000>;
+                    regulator-max-microvolt = <1800000>;
+                };
+                ldo7_reg: LDO7 {
+                    regulator-name = "ldo7";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml
new file mode 100644
index 0000000..77bcca2
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml
@@ -0,0 +1,224 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rohm,bd71847-pmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD71847 and BD71850 Power Management Integrated Circuit bindings
+
+maintainers:
+  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+
+description: |
+  BD71847AMWV and BD71850MWV are programmable Power Management ICs for powering
+  single-core,  dual-core, and quad-core SoCs such as NXP-i.MX 8M. It is
+  optimized for low BOM cost and compact solution footprint. BD71847MWV and
+  BD71850MWV integrate 6 Buck regulators and 6 LDOs.
+  Datasheets are available at
+  https://www.rohm.com/products/power-management/power-management-ic-for-system/industrial-consumer-applications/nxp-imx/bd71847amwv-product
+  https://www.rohm.com/products/power-management/power-management-ic-for-system/industrial-consumer-applications/nxp-imx/bd71850mwv-product
+
+properties:
+  compatible:
+    enum:
+      - rohm,bd71847
+      - rohm,bd71850
+
+  reg:
+    description:
+      I2C slave address.
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 0
+
+# The BD71847 abd BD71850 support two different HW states as reset target
+# states. States are called as SNVS and READY. At READY state all the PMIC
+# power outputs go down and OTP is reload. At the SNVS state all other logic
+# and external devices apart from the SNVS power domain are shut off. Please
+# refer to NXP i.MX8 documentation for further information regarding SNVS
+# state. When a reset is done via SNVS state the PMIC OTP data is not reload.
+# This causes power outputs that have been under SW control to stay down when
+# reset has switched power state to SNVS. If reset is done via READY state the
+# power outputs will be returned to HW control by OTP loading. Thus the reset
+# target state is set to READY by default. If SNVS state is used the boot
+# crucial regulators must have the regulator-always-on and regulator-boot-on
+# properties set in regulator node.
+
+  rohm,reset-snvs-powered:
+    description:
+      Transfer PMIC to SNVS state at reset.
+    type: boolean
+
+# Configure the "short press" and "long press" timers for the power button.
+# Values are rounded to what hardware supports
+# Short-press:
+#   Shortest being 10ms, next 500ms and then multiple of 500ms up to 7,5s
+# Long-press:
+#   Shortest being 10ms, next 1000ms and then multiple of 1000ms up to 15s
+# If these properties are not present the existing # configuration (from
+# bootloader or OTP) is not touched.
+
+  rohm,short-press-ms:
+    description:
+      Short press duration in milliseconds
+    enum:
+      - 10
+      - 500
+      - 1000
+      - 1500
+      - 2000
+      - 2500
+      - 3000
+      - 3500
+      - 4000
+      - 4500
+      - 5000
+      - 5500
+      - 6000
+      - 6500
+      - 7000
+      - 7500
+
+  rohm,long-press-ms:
+    description:
+      Long press duration in milliseconds
+    enum:
+      - 10
+      - 1000
+      - 2000
+      - 3000
+      - 4000
+      - 5000
+      - 6000
+      - 7000
+      - 8000
+      - 9000
+      - 10000
+      - 11000
+      - 12000
+      - 13000
+      - 14000
+      - 15000
+
+  regulators:
+    $ref: ../regulator/rohm,bd71847-regulator.yaml
+    description:
+      List of child nodes that specify the regulators.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - "#clock-cells"
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pmic: pmic@4b {
+            compatible = "rohm,bd71847";
+            reg = <0x4b>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+            #clock-cells = <0>;
+            clocks = <&osc 0>;
+            rohm,reset-snvs-powered;
+            rohm,short-press-ms = <10>;
+            rohm,long-press-ms = <2000>;
+
+            regulators {
+                buck1: BUCK1 {
+                    regulator-name = "buck1";
+                    regulator-min-microvolt = <700000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                    regulator-ramp-delay = <1250>;
+                    rohm,dvs-run-voltage = <900000>;
+                    rohm,dvs-idle-voltage = <850000>;
+                    rohm,dvs-suspend-voltage = <800000>;
+                };
+                buck2: BUCK2 {
+                    regulator-name = "buck2";
+                    regulator-min-microvolt = <700000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                    regulator-ramp-delay = <1250>;
+                    rohm,dvs-run-voltage = <1000000>;
+                    rohm,dvs-idle-voltage = <900000>;
+                };
+                buck3: BUCK3 {
+                    regulator-name = "buck3";
+                    regulator-min-microvolt = <550000>;
+                    regulator-max-microvolt = <1350000>;
+                    regulator-boot-on;
+                };
+                buck4: BUCK4 {
+                    regulator-name = "buck4";
+                    regulator-min-microvolt = <2600000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-boot-on;
+                };
+                buck5: BUCK5 {
+                    regulator-name = "buck5";
+                    regulator-min-microvolt = <1605000>;
+                    regulator-max-microvolt = <1995000>;
+                    regulator-boot-on;
+                };
+                buck8: BUCK6 {
+                    regulator-name = "buck6";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1400000>;
+                };
+
+                ldo1: LDO1 {
+                    regulator-name = "ldo1";
+                    regulator-min-microvolt = <1600000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-boot-on;
+                };
+                ldo2: LDO2 {
+                    regulator-name = "ldo2";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <900000>;
+                    regulator-boot-on;
+                };
+                ldo3: LDO3 {
+                    regulator-name = "ldo3";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+                ldo4: LDO4 {
+                    regulator-name = "ldo4";
+                    regulator-min-microvolt = <900000>;
+                    regulator-max-microvolt = <1800000>;
+                };
+                ldo5: LDO5 {
+                    regulator-name = "ldo5";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+                ldo6: LDO6 {
+                    regulator-name = "ldo6";
+                    regulator-min-microvolt = <900000>;
+                    regulator-max-microvolt = <1800000>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml
index 1a4cc5f..ddf190c 100644
--- a/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml
+++ b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml
@@ -39,6 +39,8 @@
   "#size-cells":
     const: 0
 
+  wakeup-source: true
+
   pwm:
     type: object
 
@@ -81,6 +83,16 @@
     required:
       - compatible
 
+  timer:
+    type: object
+
+    properties:
+      compatible:
+        const: st,stm32-lptimer-timer
+
+    required:
+      - compatible
+
 required:
   - "#address-cells"
   - "#size-cells"
@@ -115,6 +127,10 @@
       counter {
         compatible = "st,stm32-lptimer-counter";
       };
+
+      timer {
+        compatible = "st,stm32-lptimer-timer";
+      };
     };
 
 ...
diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.txt b/Documentation/devicetree/bindings/mfd/st,stpmic1.txt
deleted file mode 100644
index afd45c0..0000000
--- a/Documentation/devicetree/bindings/mfd/st,stpmic1.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-* STMicroelectronics STPMIC1 Power Management IC
-
-Required properties:
-- compatible:		: "st,stpmic1"
-- reg:			: The I2C slave address for the STPMIC1 chip.
-- interrupts:		: The interrupt line the device is connected to.
-- #interrupt-cells:	: Should be 1.
-- interrupt-controller:	: Marks the device node as an interrupt controller.
-			    Interrupt numbers are defined at
-			    dt-bindings/mfd/st,stpmic1.h.
-
-STPMIC1 consists in a varied group of sub-devices.
-Each sub-device binding is be described in own documentation file.
-
-Device			 Description
-------			------------
-st,stpmic1-onkey	: Power on key, see ../input/st,stpmic1-onkey.txt
-st,stpmic1-regulators	: Regulators, see ../regulator/st,stpmic1-regulator.txt
-st,stpmic1-wdt		: Watchdog, see ../watchdog/st,stpmic1-wdt.txt
-
-Example:
-
-#include <dt-bindings/mfd/st,stpmic1.h>
-
-pmic: pmic@33 {
-	compatible = "st,stpmic1";
-	reg = <0x33>;
-	interrupt-parent = <&gpioa>;
-	interrupts = <0 2>;
-
-	interrupt-controller;
-	#interrupt-cells = <2>;
-
-	onkey {
-		compatible = "st,stpmic1-onkey";
-		interrupts = <IT_PONKEY_F 0>,<IT_PONKEY_R 1>;
-		interrupt-names = "onkey-falling", "onkey-rising";
-		power-off-time-sec = <10>;
-	};
-
-	watchdog {
-		compatible = "st,stpmic1-wdt";
-	};
-
-	regulators {
-		compatible = "st,stpmic1-regulators";
-
-		vdd_core: buck1 {
-			regulator-name = "vdd_core";
-			regulator-boot-on;
-			regulator-min-microvolt = <700000>;
-			regulator-max-microvolt = <1200000>;
-		};
-		vdd: buck3 {
-			regulator-name = "vdd";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-boot-on;
-			regulator-pull-down;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml
new file mode 100644
index 0000000..f88d13d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml
@@ -0,0 +1,339 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/st,stpmic1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectonics STPMIC1 Power Management IC bindings
+
+description: STMicroelectronics STPMIC1 Power Management IC
+
+maintainers:
+  - pascal Paillet <p.paillet@st.com>
+
+properties:
+  compatible:
+    const: st,stpmic1
+
+  reg:
+    const: 0x33
+
+  interrupts:
+    maxItems: 1
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupt-controller: true
+
+  onkey:
+    type: object
+
+    allOf:
+      - $ref: ../input/input.yaml
+
+    properties:
+      compatible:
+        const: st,stpmic1-onkey
+
+      interrupts:
+        items:
+          - description: onkey-falling, happens when onkey is pressed. IT_PONKEY_F of pmic
+          - description: onkey-rising, happens when onkey is released. IT_PONKEY_R of pmic
+
+      interrupt-names:
+        items:
+          - const: onkey-falling
+          - const: onkey-rising
+
+      st,onkey-clear-cc-flag:
+        description: onkey is able power on after an over-current shutdown event.
+        $ref: /schemas/types.yaml#/definitions/flag
+
+      st,onkey-pu-inactive:
+        description: onkey pull up is not active
+        $ref: /schemas/types.yaml#/definitions/flag
+
+      power-off-time-sec:
+        minimum: 1
+        maximum: 16
+
+    required:
+      - compatible
+      - interrupts
+      - interrupt-names
+
+    additionalProperties: false
+
+  watchdog:
+    type: object
+
+    allOf:
+      - $ref: ../watchdog/watchdog.yaml
+
+    properties:
+      compatible:
+        const: st,stpmic1-wdt
+
+      timeout-sec: true
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+  regulators:
+    type: object
+
+    description: |
+      Available Regulators in STPMIC1 device are:
+        - buck1 for Buck BUCK1
+        - buck2 for Buck BUCK2
+        - buck3 for Buck BUCK3
+        - buck4 for Buck BUCK4
+        - ldo1 for LDO LDO1
+        - ldo2 for LDO LDO2
+        - ldo3 for LDO LDO3
+        - ldo4 for LDO LDO4
+        - ldo5 for LDO LDO5
+        - ldo6 for LDO LDO6
+        - vref_ddr for LDO Vref DDR
+        - boost for Buck BOOST
+        - pwr_sw1 for VBUS_OTG switch
+        - pwr_sw2 for SW_OUT switch
+      Switches are fixed voltage regulators with only enable/disable capability.
+
+    properties:
+      compatible:
+        const: st,stpmic1-regulators
+
+      ldo3:
+        type: object
+
+        properties:
+          interrupts:
+            maxItems: 1
+
+          st,mask-reset:
+            description: mask reset for this regulator,
+                         the regulator configuration is maintained during pmic reset.
+            $ref: /schemas/types.yaml#/definitions/flag
+
+          regulator-name: true
+          regulator-boot-on: true
+          regulator-always-on: true
+          regulator-min-microvolt: true
+          regulator-max-microvolt: true
+          regulator-allow-bypass: true
+          regulator-over-current-protection: true
+
+        additionalProperties: false
+
+      ldo4:
+        type: object
+
+        properties:
+          interrupts:
+            maxItems: 1
+
+          st,mask-reset:
+            description: mask reset for this regulator,
+                         the regulator configuration is maintained during pmic reset.
+            $ref: /schemas/types.yaml#/definitions/flag
+
+          regulator-name: true
+          regulator-boot-on: true
+          regulator-always-on: true
+          regulator-over-current-protection: true
+
+        additionalProperties: false
+
+      vref_ddr:
+        type: object
+
+        properties:
+          interrupts:
+            maxItems: 1
+
+          st,mask-reset:
+            description: mask reset for this regulator,
+                         the regulator configuration is maintained during pmic reset.
+            $ref: /schemas/types.yaml#/definitions/flag
+
+          regulator-name: true
+          regulator-boot-on: true
+          regulator-always-on: true
+
+        additionalProperties: false
+
+      boost:
+        type: object
+
+        properties:
+          interrupts:
+            maxItems: 1
+
+          st,mask-reset:
+            description: mask reset for this regulator,
+                         the regulator configuration is maintained during pmic reset.
+            $ref: /schemas/types.yaml#/definitions/flag
+
+          regulator-name: true
+          regulator-boot-on: true
+          regulator-always-on: true
+          regulator-over-current-protection: true
+
+        additionalProperties: false
+
+    patternProperties:
+      "^(buck[1-4]|ldo[1-6]|boost|pwr_sw[1-2])-supply$":
+        description: STPMIC1 voltage regulators supplies
+
+      "^(buck[1-4]|ldo[1-6]|boost|vref_ddr|pwr_sw[1-2])$":
+        allOf:
+          - $ref: ../regulator/regulator.yaml
+
+      "^ldo[1-2,5-6]$":
+        type: object
+
+        properties:
+          interrupts:
+            maxItems: 1
+
+          st,mask-reset:
+            description: mask reset for this regulator,
+                         the regulator configuration is maintained during pmic reset.
+            $ref: /schemas/types.yaml#/definitions/flag
+
+          regulator-name: true
+          regulator-boot-on: true
+          regulator-always-on: true
+          regulator-min-microvolt: true
+          regulator-max-microvolt: true
+          regulator-over-current-protection: true
+          regulator-enable-ramp-delay: true
+
+        additionalProperties: false
+
+      "^buck[1-4]$":
+        type: object
+
+        properties:
+          interrupts:
+            maxItems: 1
+
+          st,mask-reset:
+            description: mask reset for this regulator,
+                         the regulator configuration is maintained during pmic reset.
+            $ref: /schemas/types.yaml#/definitions/flag
+
+          regulator-name: true
+          regulator-boot-on: true
+          regulator-always-on: true
+          regulator-min-microvolt: true
+          regulator-max-microvolt: true
+          regulator-initial-mode: true
+          regulator-pull-down: true
+          regulator-over-current-protection: true
+          regulator-enable-ramp-delay: true
+
+        additionalProperties: false
+
+      "^pwr_sw[1-2]$":
+        type: object
+
+        properties:
+          interrupts:
+            maxItems: 1
+
+          regulator-name: true
+          regulator-boot-on: true
+          regulator-always-on: true
+          regulator-over-current-protection: true
+          regulator-active-discharge: true
+
+        additionalProperties: false
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+  additionalProperties: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#interrupt-cells"
+  - interrupt-controller
+
+examples:
+  - |
+    #include <dt-bindings/mfd/st,stpmic1.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      pmic@33 {
+        compatible = "st,stpmic1";
+        reg = <0x33>;
+        interrupt-parent = <&gpioa>;
+        interrupts = <0 2>;
+
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        onkey {
+          compatible = "st,stpmic1-onkey";
+          interrupts = <IT_PONKEY_F 0>,<IT_PONKEY_R 1>;
+          interrupt-names = "onkey-falling", "onkey-rising";
+          power-off-time-sec = <10>;
+        };
+
+        watchdog {
+          compatible = "st,stpmic1-wdt";
+        };
+
+        regulators {
+          compatible = "st,stpmic1-regulators";
+
+          ldo6-supply = <&v3v3>;
+
+          buck1 {
+            regulator-name = "vdd_core";
+            interrupts = <IT_CURLIM_BUCK1 0>;
+            st,mask-reset;
+            regulator-boot-on;
+            regulator-min-microvolt = <700000>;
+            regulator-max-microvolt = <1200000>;
+          };
+
+          buck3 {
+            regulator-name = "vdd";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-boot-on;
+            regulator-pull-down;
+          };
+
+          buck4 {
+            regulator-name = "v3v3";
+            interrupts = <IT_CURLIM_BUCK4 0>;
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+          };
+
+          ldo6 {
+            regulator-name = "v1v8";
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+            regulator-over-current-protection;
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml b/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml
index 0ea21a6..38ab049 100644
--- a/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml
+++ b/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml
@@ -38,6 +38,8 @@
   - reg
   - interrupts
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml
new file mode 100644
index 0000000..2f45dd0
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/cdns,sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence SD/SDIO/eMMC Host Controller (SD4HC)
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+  - Piotr Sroka <piotrs@cadence.com>
+
+allOf:
+  - $ref: mmc-controller.yaml
+
+properties:
+  compatible:
+    items:
+      - enum:
+         - socionext,uniphier-sd4hc
+      - const: cdns,sd4hc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  # PHY DLL input delays:
+  # They are used to delay the data valid window, and align the window to
+  # sampling clock. The delay starts from 5ns (for delay parameter equal to 0)
+  # and it is increased by 2.5ns in each step.
+
+  cdns,phy-input-delay-sd-highspeed:
+    description: Value of the delay in the input path for SD high-speed timing
+    allOf:
+      - $ref: "/schemas/types.yaml#/definitions/uint32"
+      - minimum: 0
+      - maximum: 0x1f
+
+  cdns,phy-input-delay-legacy:
+    description: Value of the delay in the input path for legacy timing
+    allOf:
+      - $ref: "/schemas/types.yaml#/definitions/uint32"
+      - minimum: 0
+      - maximum: 0x1f
+
+  cdns,phy-input-delay-sd-uhs-sdr12:
+    description: Value of the delay in the input path for SD UHS SDR12 timing
+    allOf:
+      - $ref: "/schemas/types.yaml#/definitions/uint32"
+      - minimum: 0
+      - maximum: 0x1f
+
+  cdns,phy-input-delay-sd-uhs-sdr25:
+    description: Value of the delay in the input path for SD UHS SDR25 timing
+    allOf:
+      - $ref: "/schemas/types.yaml#/definitions/uint32"
+      - minimum: 0
+      - maximum: 0x1f
+
+  cdns,phy-input-delay-sd-uhs-sdr50:
+    description: Value of the delay in the input path for SD UHS SDR50 timing
+    allOf:
+      - $ref: "/schemas/types.yaml#/definitions/uint32"
+      - minimum: 0
+      - maximum: 0x1f
+
+  cdns,phy-input-delay-sd-uhs-ddr50:
+    description: Value of the delay in the input path for SD UHS DDR50 timing
+    allOf:
+      - $ref: "/schemas/types.yaml#/definitions/uint32"
+      - minimum: 0
+      - maximum: 0x1f
+
+  cdns,phy-input-delay-mmc-highspeed:
+    description: Value of the delay in the input path for MMC high-speed timing
+    allOf:
+      - $ref: "/schemas/types.yaml#/definitions/uint32"
+      - minimum: 0
+      - maximum: 0x1f
+
+  cdns,phy-input-delay-mmc-ddr:
+    description: Value of the delay in the input path for eMMC high-speed DDR timing
+    allOf:
+      - $ref: "/schemas/types.yaml#/definitions/uint32"
+      - minimum: 0
+      - maximum: 0x1f
+
+  # PHY DLL clock delays:
+  # Each delay property represents the fraction of the clock period.
+  # The approximate delay value will be
+  # (<delay property value>/128)*sdmclk_clock_period.
+
+  cdns,phy-dll-delay-sdclk:
+    description: |
+      Value of the delay introduced on the sdclk output for all modes except
+      HS200, HS400 and HS400_ES.
+    allOf:
+      - $ref: "/schemas/types.yaml#/definitions/uint32"
+      - minimum: 0
+      - maximum: 0x7f
+
+  cdns,phy-dll-delay-sdclk-hsmmc:
+    description: |
+      Value of the delay introduced on the sdclk output for HS200, HS400 and
+      HS400_ES speed modes.
+    allOf:
+      - $ref: "/schemas/types.yaml#/definitions/uint32"
+      - minimum: 0
+      - maximum: 0x7f
+
+  cdns,phy-dll-delay-strobe:
+    description: |
+      Value of the delay introduced on the dat_strobe input used in
+      HS400 / HS400_ES speed modes.
+    allOf:
+      - $ref: "/schemas/types.yaml#/definitions/uint32"
+      - minimum: 0
+      - maximum: 0x7f
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+examples:
+  - |
+    emmc: mmc@5a000000 {
+        compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc";
+        reg = <0x5a000000 0x400>;
+        interrupts = <0 78 4>;
+        clocks = <&clk 4>;
+        bus-width = <8>;
+        mmc-ddr-1_8v;
+        mmc-hs200-1_8v;
+        mmc-hs400-1_8v;
+        cdns,phy-dll-delay-sdclk = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt b/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt
deleted file mode 100644
index fa423c2..0000000
--- a/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt
+++ /dev/null
@@ -1,80 +0,0 @@
-* Cadence SD/SDIO/eMMC Host Controller
-
-Required properties:
-- compatible: should be one of the following:
-    "cdns,sd4hc"               - default of the IP
-    "socionext,uniphier-sd4hc" - for Socionext UniPhier SoCs
-- reg: offset and length of the register set for the device.
-- interrupts: a single interrupt specifier.
-- clocks: phandle to the input clock.
-
-Optional properties:
-For eMMC configuration, supported speed modes are not indicated by the SDHCI
-Capabilities Register.  Instead, the following properties should be specified
-if supported.  See mmc.txt for details.
-- mmc-ddr-1_8v
-- mmc-ddr-1_2v
-- mmc-hs200-1_8v
-- mmc-hs200-1_2v
-- mmc-hs400-1_8v
-- mmc-hs400-1_2v
-
-Some PHY delays can be configured by following properties.
-PHY DLL input delays:
-They are used to delay the data valid window, and align the window
-to sampling clock. The delay starts from 5ns (for delay parameter equal to 0)
-and it is increased by 2.5ns in each step.
-- cdns,phy-input-delay-sd-highspeed:
-  Value of the delay in the input path for SD high-speed timing
-  Valid range = [0:0x1F].
-- cdns,phy-input-delay-legacy:
-  Value of the delay in the input path for legacy timing
-  Valid range = [0:0x1F].
-- cdns,phy-input-delay-sd-uhs-sdr12:
-  Value of the delay in the input path for SD UHS SDR12 timing
-  Valid range = [0:0x1F].
-- cdns,phy-input-delay-sd-uhs-sdr25:
-  Value of the delay in the input path for SD UHS SDR25 timing
-  Valid range = [0:0x1F].
-- cdns,phy-input-delay-sd-uhs-sdr50:
-  Value of the delay in the input path for SD UHS SDR50 timing
-  Valid range = [0:0x1F].
-- cdns,phy-input-delay-sd-uhs-ddr50:
-  Value of the delay in the input path for SD UHS DDR50 timing
-  Valid range = [0:0x1F].
-- cdns,phy-input-delay-mmc-highspeed:
-  Value of the delay in the input path for MMC high-speed timing
-  Valid range = [0:0x1F].
-- cdns,phy-input-delay-mmc-ddr:
-  Value of the delay in the input path for eMMC high-speed DDR timing
-  Valid range = [0:0x1F].
-
-PHY DLL clock delays:
-Each delay property represents the fraction of the clock period.
-The approximate delay value will be
-(<delay property value>/128)*sdmclk_clock_period.
-- cdns,phy-dll-delay-sdclk:
-  Value of the delay introduced on the sdclk output
-  for all modes except HS200, HS400 and HS400_ES.
-  Valid range = [0:0x7F].
-- cdns,phy-dll-delay-sdclk-hsmmc:
-  Value of the delay introduced on the sdclk output
-  for HS200, HS400 and HS400_ES speed modes.
-  Valid range = [0:0x7F].
-- cdns,phy-dll-delay-strobe:
-  Value of the delay introduced on the dat_strobe input
-  used in HS400 / HS400_ES speed modes.
-  Valid range = [0:0x7F].
-
-Example:
-	emmc: sdhci@5a000000 {
-		compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc";
-		reg = <0x5a000000 0x400>;
-		interrupts = <0 78 4>;
-		clocks = <&clk 4>;
-		bus-width = <8>;
-		mmc-ddr-1_8v;
-		mmc-hs200-1_8v;
-		mmc-hs400-1_8v;
-		cdns,phy-dll-delay-sdclk = <0>;
-	};
diff --git a/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml b/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml
new file mode 100644
index 0000000..cdfac9b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/socionext,uniphier-sd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier SD/SDIO/eMMC controller
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+properties:
+  compatible:
+    description: version 2.91, 3.1, 3.1.1, respectively
+    enum:
+      - socionext,uniphier-sd-v2.91
+      - socionext,uniphier-sd-v3.1
+      - socionext,uniphier-sd-v3.1.1
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  reset-names:
+    description: |
+      There are three reset signals at maximum
+        host:   mandatory for all variants
+        bridge: exist only for version 2.91
+        hw:     optional. exist if eMMC hw reset line is available
+    oneOf:
+      - const: host
+      - items:
+        - const: host
+        - const: bridge
+      - items:
+        - const: host
+        - const: hw
+      - items:
+        - const: host
+        - const: bridge
+        - const: hw
+
+  resets:
+    minItems: 1
+    maxItems: 3
+
+allOf:
+  - $ref: mmc-controller.yaml
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: socionext,uniphier-sd-v2.91
+    then:
+      properties:
+        reset-names:
+          contains:
+            const: bridge
+    else:
+      properties:
+        reset-names:
+          not:
+            contains:
+              const: bridge
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - reset-names
+  - resets
+
+examples:
+  - |
+    sd: mmc@5a400000 {
+        compatible = "socionext,uniphier-sd-v2.91";
+        reg = <0x5a400000 0x200>;
+        interrupts = <0 76 4>;
+        pinctrl-names = "default", "uhs";
+        pinctrl-0 = <&pinctrl_sd>;
+        pinctrl-1 = <&pinctrl_sd_uhs>;
+        clocks = <&mio_clk 0>;
+        reset-names = "host", "bridge";
+        resets = <&mio_rst 0>, <&mio_rst 3>;
+        dma-names = "rx-tx";
+        dmas = <&dmac 4>;
+        bus-width = <4>;
+        cap-sd-highspeed;
+        sd-uhs-sdr12;
+        sd-uhs-sdr25;
+        sd-uhs-sdr50;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/uniphier-sd.txt b/Documentation/devicetree/bindings/mmc/uniphier-sd.txt
deleted file mode 100644
index e1d6587..0000000
--- a/Documentation/devicetree/bindings/mmc/uniphier-sd.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-UniPhier SD/eMMC controller
-
-Required properties:
-- compatible: should be one of the following:
-    "socionext,uniphier-sd-v2.91"  - IP version 2.91
-    "socionext,uniphier-sd-v3.1"   - IP version 3.1
-    "socionext,uniphier-sd-v3.1.1" - IP version 3.1.1
-- reg: offset and length of the register set for the device.
-- interrupts: a single interrupt specifier.
-- clocks: a single clock specifier of the controller clock.
-- reset-names: should contain the following:
-    "host"   - mandatory for all versions
-    "bridge" - should exist only for "socionext,uniphier-sd-v2.91"
-    "hw"     - should exist if eMMC hw reset line is available
-- resets: a list of reset specifiers, corresponding to the reset-names
-
-Optional properties:
-- pinctrl-names: if present, should contain the following:
-    "default" - should exist for all instances
-    "uhs"     - should exist for SD instance with UHS support
-- pinctrl-0: pin control state for the default mode
-- pinctrl-1: pin control state for the UHS mode
-- dma-names: should be "rx-tx" if present.
-  This property can exist only for "socionext,uniphier-sd-v2.91".
-- dmas: a single DMA channel specifier
-  This property can exist only for "socionext,uniphier-sd-v2.91".
-- bus-width: see mmc.txt
-- cap-sd-highspeed: see mmc.txt
-- cap-mmc-highspeed: see mmc.txt
-- sd-uhs-sdr12: see mmc.txt
-- sd-uhs-sdr25: see mmc.txt
-- sd-uhs-sdr50: see mmc.txt
-- cap-mmc-hw-reset: should exist if reset-names contains "hw". see mmc.txt
-- non-removable: see mmc.txt
-
-Example:
-
-	sd: sdhc@5a400000 {
-		compatible = "socionext,uniphier-sd-v2.91";
-		reg = <0x5a400000 0x200>;
-		interrupts = <0 76 4>;
-		pinctrl-names = "default", "uhs";
-		pinctrl-0 = <&pinctrl_sd>;
-		pinctrl-1 = <&pinctrl_sd_uhs>;
-		clocks = <&mio_clk 0>;
-		reset-names = "host", "bridge";
-		resets = <&mio_rst 0>, <&mio_rst 3>;
-		dma-names = "rx-tx";
-		dmas = <&dmac 4>;
-		bus-width = <4>;
-		cap-sd-highspeed;
-		sd-uhs-sdr12;
-		sd-uhs-sdr25;
-		sd-uhs-sdr50;
-	};
diff --git a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
index 82156dc..05651a6 100644
--- a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
+++ b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
@@ -35,11 +35,11 @@
                      (optional) NAND flash cache range (if at non-standard offset)
 - reg-names        : a list of the names corresponding to the previous register
                      ranges. Should contain "nand" and (optionally)
-                     "flash-dma" and/or "nand-cache".
-- interrupts       : The NAND CTLRDY interrupt and (if Flash DMA is available)
-                     FLASH_DMA_DONE
-- interrupt-names  : May be "nand_ctlrdy" or "flash_dma_done", if broken out as
-                     individual interrupts.
+                     "flash-dma" or "flash-edu" and/or "nand-cache".
+- interrupts       : The NAND CTLRDY interrupt, (if Flash DMA is available)
+                     FLASH_DMA_DONE and if EDU is avaialble and used FLASH_EDU_DONE
+- interrupt-names  : May be "nand_ctlrdy" or "flash_dma_done" or "flash_edu_done",
+                     if broken out as individual interrupts.
                      May be "nand", if the SoC has the individual NAND
                      interrupts multiplexed behind another custom piece of
                      hardware
diff --git a/Documentation/devicetree/bindings/mtd/denali,nand.yaml b/Documentation/devicetree/bindings/mtd/denali,nand.yaml
new file mode 100644
index 0000000..46e6b67
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/denali,nand.yaml
@@ -0,0 +1,148 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/denali,nand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Denali NAND controller
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+properties:
+  compatible:
+    enum:
+      - altr,socfpga-denali-nand
+      - socionext,uniphier-denali-nand-v5a
+      - socionext,uniphier-denali-nand-v5b
+
+  reg-names:
+    description: |
+      There are two register regions:
+        nand_data:  host data/command interface
+        denali_reg: register interface
+    items:
+      - const: nand_data
+      - const: denali_reg
+
+  reg:
+    minItems: 2
+    maxItems: 2
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    description: |
+      There are three clocks:
+        nand:   controller core clock
+        nand_x: bus interface clock
+        ecc:    ECC circuit clock
+    items:
+      - const: nand
+      - const: nand_x
+      - const: ecc
+
+  clocks:
+    minItems: 3
+    maxItems: 3
+
+  reset-names:
+    description: |
+      There are two optional resets:
+        nand: controller core reset
+        reg:  register reset
+    oneOf:
+      - items:
+        - const: nand
+        - const: reg
+      - const: nand
+      - const: reg
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+allOf:
+  - $ref: nand-controller.yaml
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: altr,socfpga-denali-nand
+    then:
+      patternProperties:
+        "^nand@[a-f0-9]$":
+          type: object
+          properties:
+            nand-ecc-strength:
+              enum:
+                - 8
+                - 15
+            nand-ecc-step-size:
+              enum:
+                - 512
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: socionext,uniphier-denali-nand-v5a
+    then:
+      patternProperties:
+        "^nand@[a-f0-9]$":
+          type: object
+          properties:
+            nand-ecc-strength:
+              enum:
+                - 8
+                - 16
+                - 24
+            nand-ecc-step-size:
+              enum:
+                - 1024
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: socionext,uniphier-denali-nand-v5b
+    then:
+      patternProperties:
+        "^nand@[a-f0-9]$":
+          type: object
+          properties:
+            nand-ecc-strength:
+              enum:
+                - 8
+                - 16
+            nand-ecc-step-size:
+              enum:
+                - 1024
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+
+examples:
+  - |
+    nand-controller@ff900000 {
+        compatible = "altr,socfpga-denali-nand";
+        reg-names = "nand_data", "denali_reg";
+        reg = <0xff900000 0x20>, <0xffb80000 0x1000>;
+        interrupts = <0 144 4>;
+        clock-names = "nand", "nand_x", "ecc";
+        clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>;
+        reset-names = "nand", "reg";
+        resets = <&nand_rst>, <&nand_reg_rst>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nand@0 {
+                reg = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/denali-nand.txt b/Documentation/devicetree/bindings/mtd/denali-nand.txt
deleted file mode 100644
index 98916a8..0000000
--- a/Documentation/devicetree/bindings/mtd/denali-nand.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-* Denali NAND controller
-
-Required properties:
-  - compatible : should be one of the following:
-      "altr,socfpga-denali-nand"            - for Altera SOCFPGA
-      "socionext,uniphier-denali-nand-v5a"  - for Socionext UniPhier (v5a)
-      "socionext,uniphier-denali-nand-v5b"  - for Socionext UniPhier (v5b)
-  - reg : should contain registers location and length for data and reg.
-  - reg-names: Should contain the reg names "nand_data" and "denali_reg"
-  - #address-cells: should be 1. The cell encodes the chip select connection.
-  - #size-cells : should be 0.
-  - interrupts : The interrupt number.
-  - clocks: should contain phandle of the controller core clock, the bus
-    interface clock, and the ECC circuit clock.
-  - clock-names: should contain "nand", "nand_x", "ecc"
-
-Optional properties:
-  - resets: may contain phandles to the controller core reset, the register
-    reset
-  - reset-names: may contain "nand", "reg"
-
-Sub-nodes:
-  Sub-nodes represent available NAND chips.
-
-  Required properties:
-    - reg: should contain the bank ID of the controller to which each chip
-      select is connected.
-
-  Optional properties:
-    - nand-ecc-step-size: see nand-controller.yaml for details.
-      If present, the value must be
-        512        for "altr,socfpga-denali-nand"
-        1024       for "socionext,uniphier-denali-nand-v5a"
-        1024       for "socionext,uniphier-denali-nand-v5b"
-    - nand-ecc-strength: see nand-controller.yaml for details. Valid values are:
-        8, 15      for "altr,socfpga-denali-nand"
-        8, 16, 24  for "socionext,uniphier-denali-nand-v5a"
-        8, 16      for "socionext,uniphier-denali-nand-v5b"
-    - nand-ecc-maximize: see nand-controller.yaml for details
-
-The chip nodes may optionally contain sub-nodes describing partitions of the
-address space. See partition.txt for more detail.
-
-Examples:
-
-nand: nand@ff900000 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "altr,socfpga-denali-nand";
-	reg = <0xff900000 0x20>, <0xffb80000 0x1000>;
-	reg-names = "nand_data", "denali_reg";
-	clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>;
-	clock-names = "nand", "nand_x", "ecc";
-	resets = <&nand_rst>, <&nand_reg_rst>;
-	reset-names = "nand", "reg";
-	interrupts = <0 144 4>;
-
-	nand@0 {
-		reg = <0>;
-	}
-};
diff --git a/Documentation/devicetree/bindings/mtd/nand-macronix.txt b/Documentation/devicetree/bindings/mtd/nand-macronix.txt
new file mode 100644
index 0000000..ffab28a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/nand-macronix.txt
@@ -0,0 +1,27 @@
+Macronix NANDs Device Tree Bindings
+-----------------------------------
+
+Macronix NANDs support randomizer operation for scrambling user data,
+which can be enabled with a SET_FEATURE. The penalty when using the
+randomizer are subpage accesses prohibited and more time period needed
+for program operation, i.e., tPROG 300us to 340us (randomizer enabled).
+Enabling the randomizer is a one time persistent and non reversible
+operation.
+
+For more high-reliability concern, if subpage write is not available
+with hardware ECC and not enabled at UBI level, then enabling the
+randomizer is recommended by default by adding a new specific property
+in children nodes.
+
+Required NAND chip properties in children mode:
+- randomizer enable: should be "mxic,enable-randomizer-otp"
+
+Example:
+
+	nand: nand-controller@unit-address {
+
+		nand@0 {
+			reg = <0>;
+			mxic,enable-randomizer-otp;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
index dd25867..a7d57ba 100644
--- a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
+++ b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
@@ -20,7 +20,7 @@
 
 Optional properties:
 
- - max-speed: see Documentation/devicetree/bindings/serial/slave-device.txt
+ - max-speed: see Documentation/devicetree/bindings/serial/serial.yaml
  - shutdown-gpios: GPIO specifier, used to enable the BT module
  - device-wakeup-gpios: GPIO specifier, used to wakeup the controller
  - host-wakeup-gpios: GPIO specifier, used to wakeup the host processor.
diff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
new file mode 100644
index 0000000..cccf820
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/bosch,m_can.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch MCAN controller Bindings
+
+description: Bosch MCAN controller for CAN bus
+
+maintainers:
+  -  Sriram Dash <sriram.dash@samsung.com>
+
+properties:
+  compatible:
+    const: bosch,m_can
+
+  reg:
+    items:
+      - description: M_CAN registers map
+      - description: message RAM
+
+  reg-names:
+    items:
+      - const: m_can
+      - const: message_ram
+
+  interrupts:
+    items:
+      - description: interrupt line0
+      - description: interrupt line1
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - const: int0
+      - const: int1
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    items:
+      - description: peripheral clock
+      - description: bus clock
+
+  clock-names:
+    items:
+      - const: hclk
+      - const: cclk
+
+  bosch,mram-cfg:
+    description: |
+                 Message RAM configuration data.
+                 Multiple M_CAN instances can share the same Message RAM
+                 and each element(e.g Rx FIFO or Tx Buffer and etc) number
+                 in Message RAM is also configurable, so this property is
+                 telling driver how the shared or private Message RAM are
+                 used by this M_CAN controller.
+
+                 The format should be as follows:
+                 <offset sidf_elems xidf_elems rxf0_elems rxf1_elems rxb_elems txe_elems txb_elems>
+                 The 'offset' is an address offset of the Message RAM where
+                 the following elements start from. This is usually set to
+                 0x0 if you're using a private Message RAM. The remain cells
+                 are used to specify how many elements are used for each FIFO/Buffer.
+
+                 M_CAN includes the following elements according to user manual:
+                 11-bit Filter	0-128 elements / 0-128 words
+                 29-bit Filter	0-64 elements / 0-128 words
+                 Rx FIFO 0	0-64 elements / 0-1152 words
+                 Rx FIFO 1	0-64 elements / 0-1152 words
+                 Rx Buffers	0-64 elements / 0-1152 words
+                 Tx Event FIFO	0-32 elements / 0-64 words
+                 Tx Buffers	0-32 elements / 0-576 words
+
+                 Please refer to 2.4.1 Message RAM Configuration in Bosch
+                 M_CAN user manual for details.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/int32-array
+      - items:
+         items:
+           - description: The 'offset' is an address offset of the Message RAM
+                          where the following elements start from. This is usually
+                          set to 0x0 if you're using a private Message RAM.
+             default: 0
+           - description: 11-bit Filter 0-128 elements / 0-128 words
+             minimum: 0
+             maximum: 128
+           - description: 29-bit Filter 0-64 elements / 0-128 words
+             minimum: 0
+             maximum: 64
+           - description: Rx FIFO 0 0-64 elements / 0-1152 words
+             minimum: 0
+             maximum: 64
+           - description: Rx FIFO 1 0-64 elements / 0-1152 words
+             minimum: 0
+             maximum: 64
+           - description: Rx Buffers 0-64 elements / 0-1152 words
+             minimum: 0
+             maximum: 64
+           - description: Tx Event FIFO 0-32 elements / 0-64 words
+             minimum: 0
+             maximum: 32
+           - description: Tx Buffers 0-32 elements / 0-576 words
+             minimum: 0
+             maximum: 32
+        maxItems: 1
+
+  can-transceiver:
+    $ref: can-transceiver.yaml#
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - bosch,mram-cfg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6sx-clock.h>
+    can@20e8000 {
+      compatible = "bosch,m_can";
+      reg = <0x020e8000 0x4000>, <0x02298000 0x4000>;
+      reg-names = "m_can", "message_ram";
+      interrupts = <0 114 0x04>, <0 114 0x04>;
+      interrupt-names = "int0", "int1";
+      clocks = <&clks IMX6SX_CLK_CANFD>,
+               <&clks IMX6SX_CLK_CANFD>;
+      clock-names = "hclk", "cclk";
+      bosch,mram-cfg = <0x0 0 0 32 0 0 0 1>;
+
+      can-transceiver {
+        max-bitrate = <5000000>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/net/can/can-transceiver.txt b/Documentation/devicetree/bindings/net/can/can-transceiver.txt
deleted file mode 100644
index 0011f53..0000000
--- a/Documentation/devicetree/bindings/net/can/can-transceiver.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Generic CAN transceiver Device Tree binding
-------------------------------
-
-CAN transceiver typically limits the max speed in standard CAN and CAN FD
-modes. Typically these limitations are static and the transceivers themselves
-provide no way to detect this limitation at runtime. For this situation,
-the "can-transceiver" node can be used.
-
-Required Properties:
- max-bitrate:	a positive non 0 value that determines the max
-		speed that CAN/CAN-FD can run. Any other value
-		will be ignored.
-
-Examples:
-
-Based on Texas Instrument's TCAN1042HGV CAN Transceiver
-
-m_can0 {
-	....
-	can-transceiver {
-		max-bitrate = <5000000>;
-	};
-	...
-};
diff --git a/Documentation/devicetree/bindings/net/can/can-transceiver.yaml b/Documentation/devicetree/bindings/net/can/can-transceiver.yaml
new file mode 100644
index 0000000..6396977
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/can-transceiver.yaml
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/can-transceiver.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CAN transceiver Bindings
+
+description: CAN transceiver generic properties bindings
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+properties:
+  max-bitrate:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: a positive non 0 value that determines the max speed that CAN/CAN-FD can run.
+    minimum: 1
diff --git a/Documentation/devicetree/bindings/net/can/m_can.txt b/Documentation/devicetree/bindings/net/can/m_can.txt
deleted file mode 100644
index ed61438..0000000
--- a/Documentation/devicetree/bindings/net/can/m_can.txt
+++ /dev/null
@@ -1,75 +0,0 @@
-Bosch MCAN controller Device Tree Bindings
--------------------------------------------------
-
-Required properties:
-- compatible		: Should be "bosch,m_can" for M_CAN controllers
-- reg			: physical base address and size of the M_CAN
-			  registers map and Message RAM
-- reg-names		: Should be "m_can" and "message_ram"
-- interrupts		: Should be the interrupt number of M_CAN interrupt
-			  line 0 and line 1, could be same if sharing
-			  the same interrupt.
-- interrupt-names	: Should contain "int0" and "int1"
-- clocks		: Clocks used by controller, should be host clock
-			  and CAN clock.
-- clock-names		: Should contain "hclk" and "cclk"
-- pinctrl-<n>		: Pinctrl states as described in bindings/pinctrl/pinctrl-bindings.txt
-- pinctrl-names 	: Names corresponding to the numbered pinctrl states
-- bosch,mram-cfg	: Message RAM configuration data.
-			  Multiple M_CAN instances can share the same Message
-			  RAM and each element(e.g Rx FIFO or Tx Buffer and etc)
-			  number in Message RAM is also configurable,
-			  so this property is telling driver how the shared or
-			  private Message RAM are used by this M_CAN controller.
-
-			  The format should be as follows:
-			  <offset sidf_elems xidf_elems rxf0_elems rxf1_elems
-			   rxb_elems txe_elems txb_elems>
-			  The 'offset' is an address offset of the Message RAM
-			  where the following elements start from. This is
-			  usually set to 0x0 if you're using a private Message
-			  RAM. The remain cells are used to specify how many
-			  elements are used for each FIFO/Buffer.
-
-			  M_CAN includes the following elements according to user manual:
-			  11-bit Filter	0-128 elements / 0-128 words
-			  29-bit Filter	0-64 elements / 0-128 words
-			  Rx FIFO 0	0-64 elements / 0-1152 words
-			  Rx FIFO 1	0-64 elements / 0-1152 words
-			  Rx Buffers	0-64 elements / 0-1152 words
-			  Tx Event FIFO	0-32 elements / 0-64 words
-			  Tx Buffers	0-32 elements / 0-576 words
-
-			  Please refer to 2.4.1 Message RAM Configuration in
-			  Bosch M_CAN user manual for details.
-
-Optional Subnode:
-- can-transceiver	: Can-transceiver subnode describing maximum speed
-			  that can be used for CAN/CAN-FD modes. See
-			  Documentation/devicetree/bindings/net/can/can-transceiver.txt
-			  for details.
-Example:
-SoC dtsi:
-m_can1: can@20e8000 {
-	compatible = "bosch,m_can";
-	reg = <0x020e8000 0x4000>, <0x02298000 0x4000>;
-	reg-names = "m_can", "message_ram";
-	interrupts = <0 114 0x04>,
-		     <0 114 0x04>;
-	interrupt-names = "int0", "int1";
-	clocks = <&clks IMX6SX_CLK_CANFD>,
-		 <&clks IMX6SX_CLK_CANFD>;
-	clock-names = "hclk", "cclk";
-	bosch,mram-cfg = <0x0 0 0 32 0 0 0 1>;
-};
-
-Board dts:
-&m_can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_m_can1>;
-	status = "enabled";
-
-	can-transceiver {
-		max-bitrate = <5000000>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
index 6bdcc3f..3613c2c 100644
--- a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
+++ b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
@@ -14,7 +14,7 @@
                     the interrupt.
 	- interrupts: interrupt specification for data-ready.
 
-See Documentation/devicetree/bindings/net/can/m_can.txt for additional
+See Documentation/devicetree/bindings/net/can/bosch,m_can.yaml for additional
 required property details.
 
 Optional properties:
diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
index 8927941..5aa141c 100644
--- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
@@ -45,6 +45,9 @@
           bits of a vendor specific ID.
       - items:
           - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
+          - const: ethernet-phy-ieee802.3-c22
+      - items:
+          - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
           - const: ethernet-phy-ieee802.3-c45
 
   reg:
diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt
index 5b88fae0..ff8b0f2 100644
--- a/Documentation/devicetree/bindings/net/fsl-fec.txt
+++ b/Documentation/devicetree/bindings/net/fsl-fec.txt
@@ -22,6 +22,8 @@
 - fsl,err006687-workaround-present: If present indicates that the system has
   the hardware workaround for ERR006687 applied and does not need a software
   workaround.
+- gpr: phandle of SoC general purpose register mode. Required for wake on LAN
+  on some SoCs
  -interrupt-names:  names of the interrupts listed in interrupts property in
   the same order. The defaults if not specified are
   __Number of interrupts__   __Default__
diff --git a/Documentation/devicetree/bindings/net/marvell,mvusb.yaml b/Documentation/devicetree/bindings/net/marvell,mvusb.yaml
index 9458f66..6857376 100644
--- a/Documentation/devicetree/bindings/net/marvell,mvusb.yaml
+++ b/Documentation/devicetree/bindings/net/marvell,mvusb.yaml
@@ -38,28 +38,27 @@
 examples:
   - |
     /* USB host controller */
-    &usb1 {
-            mvusb: mdio@1 {
+    usb {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            mdio@1 {
                     compatible = "usb1286,1fa4";
                     reg = <1>;
                     #address-cells = <1>;
                     #size-cells = <0>;
-            };
-    };
 
-    /* MV88E6390X devboard */
-    &mvusb {
-            switch@0 {
-                    compatible = "marvell,mv88e6190";
-                    status = "ok";
-                    reg = <0x0>;
+                    switch@0 {
+                            compatible = "marvell,mv88e6190";
+                            reg = <0x0>;
 
-                    ports {
-                            /* Port definitions */
-                    };
+                            ports {
+                                    /* Port definitions */
+                            };
 
-                    mdio {
-                            /* PHY definitions */
+                            mdio {
+                                    /* PHY definitions */
+                            };
                     };
             };
     };
diff --git a/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt b/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt
index 112011c..219bcbd 100644
--- a/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt
+++ b/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt
@@ -42,7 +42,7 @@
 
 Please refer to the following documents for generic properties:
 
-	Documentation/devicetree/bindings/serial/slave-device.txt
+	Documentation/devicetree/bindings/serial/serial.yaml
 
 Required properties:
 
diff --git a/Documentation/devicetree/bindings/net/qca,qca7000.txt b/Documentation/devicetree/bindings/net/qca,qca7000.txt
index 21c36e5..8f5ae0b 100644
--- a/Documentation/devicetree/bindings/net/qca,qca7000.txt
+++ b/Documentation/devicetree/bindings/net/qca,qca7000.txt
@@ -68,7 +68,7 @@
 Optional properties:
 - local-mac-address : see ./ethernet.txt
 - current-speed     : current baud rate of QCA7000 which defaults to 115200
-		      if absent, see also ../serial/slave-device.txt
+		      if absent, see also ../serial/serial.yaml
 
 UART Example:
 
diff --git a/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml b/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml
index b9f9008..67df3fe 100644
--- a/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml
+++ b/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml
@@ -48,6 +48,7 @@
 
         switch@10 {
             compatible = "qca,qca8337";
+            reg = <0x10>;
             /* ... */
         };
     };
diff --git a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
index beca646..d220279 100644
--- a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
+++ b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
@@ -29,7 +29,7 @@
 
 Optional properties for compatible string qcom,wcn399x-bt:
 
- - max-speed: see Documentation/devicetree/bindings/serial/slave-device.txt
+ - max-speed: see Documentation/devicetree/bindings/serial/serial.yaml
  - firmware-name: specify the name of nvm firmware to load
  - clocks: clock provided to the controller
 
diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
index ac8c763..976f139 100644
--- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
+++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
@@ -37,6 +37,12 @@
     description:
        The physical base address and size of full the CPSW module IO range
 
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
   ranges: true
 
   clocks:
@@ -111,13 +117,6 @@
             - reg
             - phys
 
-  mdio:
-    type: object
-    allOf:
-      - $ref: "ti,davinci-mdio.yaml#"
-    description:
-      CPSW MDIO bus.
-
   cpts:
     type: object
     description:
@@ -148,6 +147,15 @@
       - clocks
       - clock-names
 
+patternProperties:
+  "^mdio@":
+    type: object
+    allOf:
+      - $ref: "ti,davinci-mdio.yaml#"
+    description:
+      CPSW MDIO bus.
+
+
 required:
   - compatible
   - reg
@@ -159,6 +167,8 @@
   - '#address-cells'
   - '#size-cells'
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
@@ -174,7 +184,6 @@
         #address-cells = <1>;
         #size-cells = <1>;
         syscon = <&scm_conf>;
-        inctrl-names = "default", "sleep";
 
         interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
                      <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/Documentation/devicetree/bindings/net/ti-bluetooth.txt b/Documentation/devicetree/bindings/net/ti-bluetooth.txt
index 6d03ff8..f48c17b 100644
--- a/Documentation/devicetree/bindings/net/ti-bluetooth.txt
+++ b/Documentation/devicetree/bindings/net/ti-bluetooth.txt
@@ -15,8 +15,7 @@
 TI WiLink devices also have a separate WiFi interface as described in
 wireless/ti,wlcore.txt.
 
-This bindings follows the UART slave device binding in
-../serial/slave-device.txt.
+This bindings follows the UART slave device binding in ../serial/serial.yaml.
 
 Required properties:
  - compatible: should be one of the following:
diff --git a/Documentation/devicetree/bindings/nvmem/ingenic,jz4780-efuse.yaml b/Documentation/devicetree/bindings/nvmem/ingenic,jz4780-efuse.yaml
new file mode 100644
index 0000000..1485d3f
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/ingenic,jz4780-efuse.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/ingenic,jz4780-efuse.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic JZ EFUSE driver bindings
+
+maintainers:
+  - PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
+
+allOf:
+  - $ref: "nvmem.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - ingenic,jz4780-efuse
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    # Handle for the ahb for the efuse.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/jz4780-cgu.h>
+
+    efuse@134100d0 {
+        compatible = "ingenic,jz4780-efuse";
+        reg = <0x134100d0 0x2c>;
+
+        clocks = <&cgu JZ4780_CLK_AHB2>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt b/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt
index 84fdc42..b6acbe6 100644
--- a/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt
@@ -18,7 +18,6 @@
 - reg-names: Must be
 	- "elbi"	External local bus interface registers
 	- "cfg"		Meson specific registers
-	- "phy"		Meson PCIE PHY registers for AXG SoC Family
 	- "config"	PCIe configuration space
 - reset-gpios: The GPIO to generate PCIe PERST# assert and deassert signal.
 - clocks: Must contain an entry for each entry in clock-names.
@@ -26,13 +25,13 @@
 	- "pclk"       PCIe GEN 100M PLL clock
 	- "port"       PCIe_x(A or B) RC clock gate
 	- "general"    PCIe Phy clock
-	- "mipi"       PCIe_x(A or B) 100M ref clock gate for AXG SoC Family
 - resets: phandle to the reset lines.
-- reset-names: must contain "phy" "port" and "apb"
-       - "phy"         Share PHY reset for AXG SoC Family
+- reset-names: must contain "port" and "apb"
        - "port"        Port A or B reset
        - "apb"         Share APB reset
-- phys: should contain a phandle to the shared phy for G12A SoC Family
+- phys: should contain a phandle to the PCIE phy
+- phy-names: must contain "pcie"
+
 - device_type:
 	should be "pci". As specified in designware-pcie.txt
 
@@ -43,9 +42,8 @@
 			compatible = "amlogic,axg-pcie", "snps,dw-pcie";
 			reg = <0x0 0xf9800000 0x0 0x400000
 					0x0 0xff646000 0x0 0x2000
-					0x0 0xff644000 0x0 0x2000
 					0x0 0xf9f00000 0x0 0x100000>;
-			reg-names = "elbi", "cfg", "phy", "config";
+			reg-names = "elbi", "cfg", "config";
 			reset-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
 			interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>;
 			#interrupt-cells = <1>;
@@ -58,17 +56,15 @@
 			ranges = <0x82000000 0 0 0x0 0xf9c00000 0 0x00300000>;
 
 			clocks = <&clkc CLKID_USB
-					&clkc CLKID_MIPI_ENABLE
 					&clkc CLKID_PCIE_A
 					&clkc CLKID_PCIE_CML_EN0>;
 			clock-names = "general",
-					"mipi",
 					"pclk",
 					"port";
-			resets = <&reset RESET_PCIE_PHY>,
-				<&reset RESET_PCIE_A>,
+			resets = <&reset RESET_PCIE_A>,
 				<&reset RESET_PCIE_APB>;
-			reset-names = "phy",
-					"port",
+			reset-names = "port",
 					"apb";
+			phys = <&pcie_phy>;
+			phy-names = "pcie";
 	};
diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.txt b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.txt
deleted file mode 100644
index 4a0475e..0000000
--- a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* Cadence PCIe endpoint controller
-
-Required properties:
-- compatible: Should contain "cdns,cdns-pcie-ep" to identify the IP used.
-- reg: Should contain the controller register base address and AXI interface
-  region base address respectively.
-- reg-names: Must be "reg" and "mem" respectively.
-- cdns,max-outbound-regions: Set to maximum number of outbound regions
-
-Optional properties:
-- max-functions: Maximum number of functions that can be configured (default 1).
-- phys: From PHY bindings: List of Generic PHY phandles. One per lane if more
-  than one in the list.  If only one PHY listed it must manage all lanes. 
-- phy-names:  List of names to identify the PHY.
-
-Example:
-
-pcie@fc000000 {
-	compatible = "cdns,cdns-pcie-ep";
-	reg = <0x0 0xfc000000 0x0 0x01000000>,
-	      <0x0 0x80000000 0x0 0x40000000>;
-	reg-names = "reg", "mem";
-	cdns,max-outbound-regions = <16>;
-	max-functions = /bits/ 8 <8>;
-	phys = <&ep_phy0 &ep_phy1>;
-	phy-names = "pcie-lane0","pcie-lane1";
-};
diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml
new file mode 100644
index 0000000..2996f8d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/cdns,cdns-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence PCIe EP Controller
+
+maintainers:
+  - Tom Joseph <tjoseph@cadence.com>
+
+allOf:
+  - $ref: "cdns-pcie.yaml#"
+  - $ref: "pci-ep.yaml#"
+
+properties:
+  compatible:
+    const: cdns,cdns-pcie-ep
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: reg
+      - const: mem
+
+required:
+  - reg
+  - reg-names
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie-ep@fc000000 {
+                compatible = "cdns,cdns-pcie-ep";
+                reg = <0x0 0xfc000000 0x0 0x01000000>,
+                      <0x0 0x80000000 0x0 0x40000000>;
+                reg-names = "reg", "mem";
+                cdns,max-outbound-regions = <16>;
+                max-functions = /bits/ 8 <8>;
+                phys = <&pcie_phy0>;
+                phy-names = "pcie-phy";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
deleted file mode 100644
index 91de69c..0000000
--- a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-* Cadence PCIe host controller
-
-This PCIe controller inherits the base properties defined in
-host-generic-pci.txt.
-
-Required properties:
-- compatible: Should contain "cdns,cdns-pcie-host" to identify the IP used.
-- reg: Should contain the controller register base address, PCIe configuration
-  window base address, and AXI interface region base address respectively.
-- reg-names: Must be "reg", "cfg" and "mem" respectively.
-- #address-cells: Set to <3>
-- #size-cells: Set to <2>
-- device_type: Set to "pci"
-- ranges: Ranges for the PCI memory and I/O regions
-- #interrupt-cells: Set to <1>
-- interrupt-map-mask and interrupt-map: Standard PCI properties to define the
-  mapping of the PCIe interface to interrupt numbers.
-
-Optional properties:
-- cdns,max-outbound-regions: Set to maximum number of outbound regions
-  (default 32)
-- cdns,no-bar-match-nbits: Set into the no BAR match register to configure the
-  number of least significant bits kept during inbound (PCIe -> AXI) address
-  translations (default 32)
-- vendor-id: The PCI vendor ID (16 bits, default is design dependent)
-- device-id: The PCI device ID (16 bits, default is design dependent)
-- phys: From PHY bindings: List of Generic PHY phandles. One per lane if more
-  than one in the list.  If only one PHY listed it must manage all lanes. 
-- phy-names:  List of names to identify the PHY.
-
-Example:
-
-pcie@fb000000 {
-	compatible = "cdns,cdns-pcie-host";
-	device_type = "pci";
-	#address-cells = <3>;
-	#size-cells = <2>;
-	bus-range = <0x0 0xff>;
-	linux,pci-domain = <0>;
-	cdns,max-outbound-regions = <16>;
-	cdns,no-bar-match-nbits = <32>;
-	vendor-id = /bits/ 16 <0x17cd>;
-	device-id = /bits/ 16 <0x0200>;
-
-	reg = <0x0 0xfb000000  0x0 0x01000000>,
-	      <0x0 0x41000000  0x0 0x00001000>,
-	      <0x0 0x40000000  0x0 0x04000000>;
-	reg-names = "reg", "cfg", "mem";
-
-	ranges = <0x02000000 0x0 0x42000000  0x0 0x42000000  0x0 0x1000000>,
-		 <0x01000000 0x0 0x43000000  0x0 0x43000000  0x0 0x0010000>;
-
-	#interrupt-cells = <0x1>;
-
-	interrupt-map = <0x0 0x0 0x0  0x1  &gic  0x0 0x0 0x0 14 0x1
-			 0x0 0x0 0x0  0x2  &gic  0x0 0x0 0x0 15 0x1
-			 0x0 0x0 0x0  0x3  &gic  0x0 0x0 0x0 16 0x1
-			 0x0 0x0 0x0  0x4  &gic  0x0 0x0 0x0 17 0x1>;
-
-	interrupt-map-mask = <0x0 0x0 0x0  0x7>;
-
-	msi-parent = <&its_pci>;
-
-	phys = <&pcie_phy0>;
-	phy-names = "pcie-phy";
-};
diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml
new file mode 100644
index 0000000..cabbe46
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/cdns,cdns-pcie-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence PCIe host controller
+
+maintainers:
+  - Tom Joseph <tjoseph@cadence.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: "cdns-pcie-host.yaml#"
+
+properties:
+  compatible:
+    const: cdns,cdns-pcie-host
+
+  reg:
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: reg
+      - const: cfg
+      - const: mem
+
+  msi-parent: true
+
+required:
+  - reg
+  - reg-names
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@fb000000 {
+            compatible = "cdns,cdns-pcie-host";
+            device_type = "pci";
+            #address-cells = <3>;
+            #size-cells = <2>;
+            bus-range = <0x0 0xff>;
+            linux,pci-domain = <0>;
+            cdns,max-outbound-regions = <16>;
+            cdns,no-bar-match-nbits = <32>;
+            vendor-id = <0x17cd>;
+            device-id = <0x0200>;
+
+            reg = <0x0 0xfb000000  0x0 0x01000000>,
+                  <0x0 0x41000000  0x0 0x00001000>,
+                  <0x0 0x40000000  0x0 0x04000000>;
+            reg-names = "reg", "cfg", "mem";
+
+            ranges = <0x02000000 0x0 0x42000000  0x0 0x42000000  0x0 0x1000000>,
+                     <0x01000000 0x0 0x43000000  0x0 0x43000000  0x0 0x0010000>;
+
+            #interrupt-cells = <0x1>;
+
+            interrupt-map = <0x0 0x0 0x0  0x1  &gic  0x0 0x0 0x0 14 0x1>,
+                 <0x0 0x0 0x0  0x2  &gic  0x0 0x0 0x0 15 0x1>,
+                 <0x0 0x0 0x0  0x3  &gic  0x0 0x0 0x0 16 0x1>,
+                 <0x0 0x0 0x0  0x4  &gic  0x0 0x0 0x0 17 0x1>;
+
+            interrupt-map-mask = <0x0 0x0 0x0  0x7>;
+
+            msi-parent = <&its_pci>;
+
+            phys = <&pcie_phy0>;
+            phy-names = "pcie-phy";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml
new file mode 100644
index 0000000..ab6e43b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/pci/cdns-pcie-host.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Cadence PCIe Host
+
+maintainers:
+  - Tom Joseph <tjoseph@cadence.com>
+
+allOf:
+  - $ref: "/schemas/pci/pci-bus.yaml#"
+  - $ref: "cdns-pcie.yaml#"
+
+properties:
+  cdns,no-bar-match-nbits:
+    description:
+      Set into the no BAR match register to configure the number of least
+      significant bits kept during inbound (PCIe -> AXI) address translations
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 64
+    default: 32
+
+  msi-parent: true
diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie.yaml
new file mode 100644
index 0000000..6887ccc
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/cdns-pcie.yaml
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/pci/cdns-pcie.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Cadence PCIe Core
+
+maintainers:
+  - Tom Joseph <tjoseph@cadence.com>
+
+properties:
+  cdns,max-outbound-regions:
+    description: maximum number of outbound regions
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 32
+    default: 32
+
+  phys:
+    description:
+      One per lane if more than one in the list. If only one PHY listed it must
+      manage all lanes.
+    minItems: 1
+    maxItems: 16
+
+  phy-names:
+    items:
+      - const: pcie-phy
+    # FIXME: names when more than 1
diff --git a/Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt b/Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt
new file mode 100644
index 0000000..b40fb5d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt
@@ -0,0 +1,52 @@
+NXP Layerscape PCIe Gen4 controller
+
+This PCIe controller is based on the Mobiveil PCIe IP and thus inherits all
+the common properties defined in mobiveil-pcie.txt.
+
+Required properties:
+- compatible: should contain the platform identifier such as:
+  "fsl,lx2160a-pcie"
+- reg: base addresses and lengths of the PCIe controller register blocks.
+  "csr_axi_slave": Bridge config registers
+  "config_axi_slave": PCIe controller registers
+- interrupts: A list of interrupt outputs of the controller. Must contain an
+  entry for each entry in the interrupt-names property.
+- interrupt-names: It could include the following entries:
+  "intr": The interrupt that is asserted for controller interrupts
+  "aer": Asserted for aer interrupt when chip support the aer interrupt with
+	 none MSI/MSI-X/INTx mode,but there is interrupt line for aer.
+  "pme": Asserted for pme interrupt when chip support the pme interrupt with
+	 none MSI/MSI-X/INTx mode,but there is interrupt line for pme.
+- dma-coherent: Indicates that the hardware IP block can ensure the coherency
+  of the data transferred from/to the IP block. This can avoid the software
+  cache flush/invalid actions, and improve the performance significantly.
+- msi-parent : See the generic MSI binding described in
+  Documentation/devicetree/bindings/interrupt-controller/msi.txt.
+
+Example:
+
+	pcie@3400000 {
+		compatible = "fsl,lx2160a-pcie";
+		reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
+		       0x80 0x00000000 0x0 0x00001000>; /* configuration space */
+		reg-names = "csr_axi_slave", "config_axi_slave";
+		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+		interrupt-names = "aer", "pme", "intr";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		apio-wins = <8>;
+		ppio-wins = <8>;
+		dma-coherent;
+		bus-range = <0x0 0xff>;
+		msi-parent = <&its>;
+		ranges = <0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				<0000 0 0 2 &gic 0 0 GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				<0000 0 0 3 &gic 0 0 GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				<0000 0 0 4 &gic 0 0 GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+	};
diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt
index b739f92..bd43f3c 100644
--- a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt
@@ -1,11 +1,11 @@
 NVIDIA Tegra PCIe controller (Synopsys DesignWare Core based)
 
-This PCIe host controller is based on the Synopsis Designware PCIe IP
+This PCIe controller is based on the Synopsis Designware PCIe IP
 and thus inherits all the common properties defined in designware-pcie.txt.
+Some of the controller instances are dual mode where in they can work either
+in root port mode or endpoint mode but one at a time.
 
 Required properties:
-- compatible: For Tegra19x, must contain "nvidia,tegra194-pcie".
-- device_type: Must be "pci"
 - power-domains: A phandle to the node that controls power to the respective
   PCIe controller and a specifier name for the PCIe controller. Following are
   the specifiers for the different PCIe controllers
@@ -32,6 +32,32 @@
   entry for each entry in the interrupt-names property.
 - interrupt-names: Must include the following entries:
   "intr": The Tegra interrupt that is asserted for controller interrupts
+- clocks: Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+  - core
+- resets: Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+  - apb
+  - core
+- phys: Must contain a phandle to P2U PHY for each entry in phy-names.
+- phy-names: Must include an entry for each active lane.
+  "p2u-N": where N ranges from 0 to one less than the total number of lanes
+- nvidia,bpmp: Must contain a pair of phandle to BPMP controller node followed
+  by controller-id. Following are the controller ids for each controller.
+    0: C0
+    1: C1
+    2: C2
+    3: C3
+    4: C4
+    5: C5
+- vddio-pex-ctl-supply: Regulator supply for PCIe side band signals
+
+RC mode:
+- compatible: Tegra19x must contain  "nvidia,tegra194-pcie"
+- device_type: Must be "pci" for RC mode
+- interrupt-names: Must include the following entries:
   "msi": The Tegra interrupt that is asserted when an MSI is received
 - bus-range: Range of bus numbers associated with this controller
 - #address-cells: Address representation for root ports (must be 3)
@@ -60,27 +86,15 @@
 - interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties
   Please refer to the standard PCI bus binding document for a more detailed
   explanation.
-- clocks: Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
-  - core
-- resets: Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names: Must include the following entries:
-  - apb
-  - core
-- phys: Must contain a phandle to P2U PHY for each entry in phy-names.
-- phy-names: Must include an entry for each active lane.
-  "p2u-N": where N ranges from 0 to one less than the total number of lanes
-- nvidia,bpmp: Must contain a pair of phandle to BPMP controller node followed
-  by controller-id. Following are the controller ids for each controller.
-    0: C0
-    1: C1
-    2: C2
-    3: C3
-    4: C4
-    5: C5
-- vddio-pex-ctl-supply: Regulator supply for PCIe side band signals
+
+EP mode:
+In Tegra194, Only controllers C0, C4 & C5 support EP mode.
+- compatible: Tegra19x must contain "nvidia,tegra194-pcie-ep"
+- reg-names: Must include the following entries:
+  "addr_space": Used to map remote RC address space
+- reset-gpios: Must contain a phandle to a GPIO controller followed by
+  GPIO that is being used as PERST input signal. Please refer to pci.txt
+  document.
 
 Optional properties:
 - pinctrl-names: A list of pinctrl state names.
@@ -104,6 +118,8 @@
    specified in microseconds
 - nvidia,aspm-l0s-entrance-latency-us: ASPM L0s entrance latency to be
    specified in microseconds
+
+RC mode:
 - vpcie3v3-supply: A phandle to the regulator node that supplies 3.3V to the slot
   if the platform has one such slot. (Ex:- x16 slot owned by C5 controller
   in p2972-0000 platform).
@@ -111,14 +127,21 @@
   if the platform has one such slot. (Ex:- x16 slot owned by C5 controller
   in p2972-0000 platform).
 
+EP mode:
+- nvidia,refclk-select-gpios: Must contain a phandle to a GPIO controller
+  followed by GPIO that is being used to enable REFCLK to controller from host
+
+NOTE:- On Tegra194's P2972-0000 platform, only C5 controller can be enabled to
+operate in the endpoint mode because of the way the platform is designed.
+
 Examples:
 =========
 
-Tegra194:
---------
+Tegra194 RC mode:
+-----------------
 
 	pcie@14180000 {
-		compatible = "nvidia,tegra194-pcie", "snps,dw-pcie";
+		compatible = "nvidia,tegra194-pcie";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>;
 		reg = <0x00 0x14180000 0x0 0x00020000   /* appl registers (128K)      */
 		       0x00 0x38000000 0x0 0x00040000   /* configuration space (256K) */
@@ -169,3 +192,53 @@
 		       <&p2u_hsio_5>;
 		phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";
 	};
+
+Tegra194 EP mode:
+-----------------
+
+	pcie_ep@141a0000 {
+		compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep";
+		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>;
+		reg = <0x00 0x141a0000 0x0 0x00020000   /* appl registers (128K)      */
+		       0x00 0x3a040000 0x0 0x00040000   /* iATU_DMA reg space (256K)  */
+		       0x00 0x3a080000 0x0 0x00040000   /* DBI reg space (256K)       */
+		       0x1c 0x00000000 0x4 0x00000000>; /* Address Space (16G)        */
+		reg-names = "appl", "atu_dma", "dbi", "addr_space";
+
+		num-lanes = <8>;
+		num-ib-windows = <2>;
+		num-ob-windows = <8>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&clkreq_c5_bi_dir_state>;
+
+		clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>;
+		clock-names = "core";
+
+		resets = <&bpmp TEGRA194_RESET_PEX1_CORE_5_APB>,
+			 <&bpmp TEGRA194_RESET_PEX1_CORE_5>;
+		reset-names = "apb", "core";
+
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;	/* controller interrupt */
+		interrupt-names = "intr";
+
+		nvidia,bpmp = <&bpmp 5>;
+
+		nvidia,aspm-cmrt-us = <60>;
+		nvidia,aspm-pwr-on-t-us = <20>;
+		nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+		vddio-pex-ctl-supply = <&vdd_1v8ao>;
+
+		reset-gpios = <&gpio TEGRA194_MAIN_GPIO(GG, 1) GPIO_ACTIVE_LOW>;
+
+		nvidia,refclk-select-gpios = <&gpio_aon TEGRA194_AON_GPIO(AA, 5)
+					      GPIO_ACTIVE_HIGH>;
+
+		phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+		       <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+		       <&p2u_nvhs_6>, <&p2u_nvhs_7>;
+
+		phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+			    "p2u-5", "p2u-6", "p2u-7";
+	};
diff --git a/Documentation/devicetree/bindings/pci/pci-ep.yaml b/Documentation/devicetree/bindings/pci/pci-ep.yaml
new file mode 100644
index 0000000..b3df100
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/pci-ep.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/pci-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PCI Endpoint Controller Schema
+
+description: |
+  Common properties for PCI Endpoint Controller Nodes.
+
+maintainers:
+  - Kishon Vijay Abraham I <kishon@ti.com>
+
+properties:
+  $nodename:
+    pattern: "^pcie-ep@"
+
+  max-functions:
+    description: Maximum number of functions that can be configured
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint8
+    minimum: 1
+    default: 1
+    maximum: 255
+
+  max-link-speed:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 1, 2, 3, 4 ]
+
+  num-lanes:
+    description: maximum number of lanes
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    default: 1
+    maximum: 16
+
+required:
+  - compatible
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml
index e5922b4..c03b831 100644
--- a/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml
@@ -34,6 +34,8 @@
   - resets
   - "#phy-cells"
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/sun50i-h6-ccu.h>
diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml
new file mode 100644
index 0000000..88683db
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/amlogic,meson-axg-mipi-pcie-analog.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic AXG shared MIPI/PCIE analog PHY
+
+maintainers:
+  - Remi Pommarel <repk@triplefau.lt>
+
+properties:
+  compatible:
+    const: amlogic,axg-mipi-pcie-analog-phy
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    mpphy: phy@0 {
+          compatible = "amlogic,axg-mipi-pcie-analog-phy";
+          reg = <0x0 0x0 0x0 0xc>;
+          #phy-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-axg-pcie.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-axg-pcie.yaml
new file mode 100644
index 0000000..086478a
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/amlogic,meson-axg-pcie.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/amlogic,meson-axg-pcie.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic AXG PCIE PHY
+
+maintainers:
+  - Remi Pommarel <repk@triplefau.lt>
+
+properties:
+  compatible:
+    const: amlogic,axg-pcie-phy
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: analog
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - phys
+  - phy-names
+  - resets
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/reset/amlogic,meson-axg-reset.h>
+    #include <dt-bindings/phy/phy.h>
+    pcie_phy: pcie-phy@ff644000 {
+          compatible = "amlogic,axg-pcie-phy";
+          reg = <0x0 0xff644000 0x0 0x1c>;
+          resets = <&reset RESET_PCIE_PHY>;
+          phys = <&mipi_analog_phy PHY_TYPE_PCIE>;
+          phy-names = "analog";
+          #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml
index 346f9c3..453c083 100644
--- a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml
@@ -44,6 +44,8 @@
   - reset-names
   - "#phy-cells"
 
+additionalProperties: false
+
 examples:
   - |
     phy@46000 {
diff --git a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
index 0ccee64..9a346d6 100644
--- a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
@@ -40,6 +40,8 @@
   - reg
   - clocks
 
+additionalProperties: false
+
 examples:
   - |
     sysconf: chiptop@e0200000 {
diff --git a/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml b/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml
index 5ab4361..00609ac 100644
--- a/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml
@@ -31,6 +31,8 @@
   - reset-gpios
   - "#phy-cells"
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/phy/marvell,mmp3-usb-phy.yaml b/Documentation/devicetree/bindings/phy/marvell,mmp3-usb-phy.yaml
new file mode 100644
index 0000000..c97043e
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/marvell,mmp3-usb-phy.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+# Copyright 2019,2020 Lubomir Rintel <lkundrak@v3.sk>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/marvell,mmp3-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MMP3 USB PHY bindings
+
+maintainers:
+  - Lubomir Rintel <lkundrak@v3.sk>
+
+properties:
+  $nodename:
+    pattern: '^usb-phy@[a-f0-9]+$'
+
+  compatible:
+    const: marvell,mmp3-usb-phy
+
+  reg:
+    maxItems: 1
+    description: base address of the device
+
+  '#phy-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    usb-phy@d4207000 {
+      compatible = "marvell,mmp3-usb-phy";
+      reg = <0xd4207000 0x40>;
+      #phy-cells = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt
index 9fb682e..38c5fa2 100644
--- a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt
+++ b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt
@@ -37,6 +37,7 @@
   - Tegra132: "nvidia,tegra132-xusb-padctl", "nvidia,tegra124-xusb-padctl"
   - Tegra210: "nvidia,tegra210-xusb-padctl"
   - Tegra186: "nvidia,tegra186-xusb-padctl"
+  - Tegra194: "nvidia,tegra194-xusb-padctl"
 - reg: Physical base address and length of the controller's registers.
 - resets: Must contain an entry for each entry in reset-names.
 - reset-names: Must include the following entries:
@@ -62,6 +63,10 @@
 - vclamp-usb-supply: Bias rail for USB pad. Must supply 1.8 V.
 - vddio-hsic-supply: HSIC PHY power supply. Must supply 1.2 V.
 
+For Tegra194:
+- avdd-usb-supply: USB I/Os, VBUS, ID, REXT, D+/D- power supply. Must supply
+  3.3 V.
+- vclamp-usb-supply: Bias rail for USB pad. Must supply 1.8 V.
 
 Pad nodes:
 ==========
@@ -154,6 +159,11 @@
 - sata: sata-0
   - functions: "usb3-ss", "sata"
 
+For Tegra194, the list of valid PHY nodes is given below:
+- usb2: usb2-0, usb2-1, usb2-2, usb2-3
+  - functions: "xusb"
+- usb3: usb3-0, usb3-1, usb3-2, usb3-3
+  - functions: "xusb"
 
 Port nodes:
 ===========
@@ -174,6 +184,12 @@
   - "device": for USB device mode
   - "otg": for USB OTG mode
 
+Required properties for OTG/Peripheral capable USB2 ports:
+- usb-role-switch: Boolean property to indicate that the port support OTG or
+  peripheral mode. If present, the port supports switching between USB host
+  and peripheral roles. Connector should be added as subnode.
+  See usb/usb-conn-gpio.txt.
+
 Optional properties:
 - nvidia,internal: A boolean property whose presence determines that a port
   is internal. In the absence of this property the port is considered to be
@@ -221,6 +237,11 @@
   is internal. In the absence of this property the port is considered to be
   external.
 
+- maximum-speed: Only for Tegra194. A string property that specifies maximum
+  supported speed of a usb3 port. Valid values are:
+  - "super-speed-plus": default, the usb3 port supports USB 3.1 Gen 2 speed.
+  - "super-speed": the usb3 port supports USB 3.1 Gen 1 speed only.
+
 For Tegra124 and Tegra132, the XUSB pad controller exposes the following
 ports:
 - 3x USB2: usb2-0, usb2-1, usb2-2
@@ -233,6 +254,9 @@
 - 2x HSIC: hsic-0, hsic-1
 - 4x super-speed USB: usb3-0, usb3-1, usb3-2, usb3-3
 
+For Tegra194, the XUSB pad controller exposes the following ports:
+- 4x USB2: usb2-0, usb2-1, usb2-2, usb2-3
+- 4x super-speed USB: usb3-0, usb3-1, usb3-2, usb3-3
 
 Examples:
 =========
diff --git a/Documentation/devicetree/bindings/phy/phy-mmp3-usb.txt b/Documentation/devicetree/bindings/phy/phy-mmp3-usb.txt
deleted file mode 100644
index 7183b91..0000000
--- a/Documentation/devicetree/bindings/phy/phy-mmp3-usb.txt
+++ /dev/null
@@ -1,13 +0,0 @@
-Marvell MMP3 USB PHY
---------------------
-
-Required properties:
-- compatible: must be "marvell,mmp3-usb-phy"
-- #phy-cells: must be 0
-
-Example:
-	usb-phy: usb-phy@d4207000 {
-		compatible = "marvell,mmp3-usb-phy";
-		reg = <0xd4207000 0x40>;
-		#phy-cells = <0>;
-	};
diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
deleted file mode 100644
index 541f529..0000000
--- a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
+++ /dev/null
@@ -1,81 +0,0 @@
-ROCKCHIP USB2.0 PHY WITH INNO IP BLOCK
-
-Required properties (phy (parent) node):
- - compatible : should be one of the listed compatibles:
-	* "rockchip,px30-usb2phy"
-	* "rockchip,rk3228-usb2phy"
-	* "rockchip,rk3328-usb2phy"
-	* "rockchip,rk3366-usb2phy"
-	* "rockchip,rk3399-usb2phy"
-	* "rockchip,rv1108-usb2phy"
- - reg : the address offset of grf for usb-phy configuration.
- - #clock-cells : should be 0.
- - clock-output-names : specify the 480m output clock name.
-
-Optional properties:
- - clocks : phandle + phy specifier pair, for the input clock of phy.
- - clock-names : input clock name of phy, must be "phyclk".
- - assigned-clocks : phandle of usb 480m clock.
- - assigned-clock-parents : parent of usb 480m clock, select between
-		 usb-phy output 480m and xin24m.
-		 Refer to clk/clock-bindings.txt for generic clock
-		 consumer properties.
- - rockchip,usbgrf : phandle to the syscon managing the "usb general
-		 register files". When set driver will request its
-		 phandle as one companion-grf for some special SoCs
-		 (e.g RV1108).
- - extcon : phandle to the extcon device providing the cable state for
-		 the otg phy.
-
-Required nodes : a sub-node is required for each port the phy provides.
-		 The sub-node name is used to identify host or otg port,
-		 and shall be the following entries:
-	* "otg-port" : the name of otg port.
-	* "host-port" : the name of host port.
-
-Required properties (port (child) node):
- - #phy-cells : must be 0. See ./phy-bindings.txt for details.
- - interrupts : specify an interrupt for each entry in interrupt-names.
- - interrupt-names : a list which should be one of the following cases:
-	Regular case:
-	* "otg-id" : for the otg id interrupt.
-	* "otg-bvalid" : for the otg vbus interrupt.
-	* "linestate" : for the host/otg linestate interrupt.
-	Some SoCs use one interrupt with the above muxed together, so for these
-	* "otg-mux" : otg-port interrupt, which mux otg-id/otg-bvalid/linestate
-		to one.
-
-Optional properties:
- - phy-supply : phandle to a regulator that provides power to VBUS.
-		See ./phy-bindings.txt for details.
-
-Example:
-
-grf: syscon@ff770000 {
-	compatible = "rockchip,rk3366-grf", "syscon", "simple-mfd";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-...
-
-	u2phy: usb2-phy@700 {
-		compatible = "rockchip,rk3366-usb2phy";
-		reg = <0x700 0x2c>;
-		#clock-cells = <0>;
-		clock-output-names = "sclk_otgphy0_480m";
-
-		u2phy_otg: otg-port {
-			#phy-cells = <0>;
-			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "otg-id", "otg-bvalid", "linestate";
-		};
-
-		u2phy_host: host-port {
-			#phy-cells = <0>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "linestate";
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml
new file mode 100644
index 0000000..cb71561
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml
@@ -0,0 +1,155 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/phy-rockchip-inno-usb2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip USB2.0 phy with inno IP block
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,px30-usb2phy
+      - rockchip,rk3228-usb2phy
+      - rockchip,rk3328-usb2phy
+      - rockchip,rk3366-usb2phy
+      - rockchip,rk3399-usb2phy
+      - rockchip,rv1108-usb2phy
+
+  reg:
+    maxItems: 1
+
+  clock-output-names:
+    description:
+      The usb 480m output clock name.
+
+  "#clock-cells":
+    const: 0
+
+  "#phy-cells":
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: phyclk
+
+  assigned-clocks:
+    description:
+      Phandle of the usb 480m clock.
+
+  assigned-clock-parents:
+    description:
+      Parent of the usb 480m clock.
+      Select between usb-phy output 480m and xin24m.
+      Refer to clk/clock-bindings.txt for generic clock consumer properties.
+
+  extcon:
+    description:
+      Phandle to the extcon device providing the cable state for the otg phy.
+
+  rockchip,usbgrf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the 'usb general register files'.
+      When set the driver will request its phandle as one companion-grf
+      for some special SoCs (e.g rv1108).
+
+  host-port:
+    type: object
+    additionalProperties: false
+
+    properties:
+      "#phy-cells":
+        const: 0
+
+      interrupts:
+        description: host linestate interrupt
+
+      interrupt-names:
+        const: linestate
+
+      phy-supply:
+        description:
+          Phandle to a regulator that provides power to VBUS.
+          See ./phy-bindings.txt for details.
+
+    required:
+      - "#phy-cells"
+      - interrupts
+      - interrupt-names
+
+  otg-port:
+    type: object
+    additionalProperties: false
+
+    properties:
+      "#phy-cells":
+        const: 0
+
+      interrupts:
+        minItems: 1
+        maxItems: 3
+
+      interrupt-names:
+        oneOf:
+          - const: linestate
+          - const: otg-mux
+          - items:
+            - const: otg-bvalid
+            - const: otg-id
+            - const: linestate
+
+      phy-supply:
+        description:
+          Phandle to a regulator that provides power to VBUS.
+          See ./phy-bindings.txt for details.
+
+    required:
+      - "#phy-cells"
+      - interrupts
+      - interrupt-names
+
+required:
+  - compatible
+  - reg
+  - clock-output-names
+  - "#clock-cells"
+  - "#phy-cells"
+  - host-port
+  - otg-port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    u2phy0: usb2-phy@e450 {
+      compatible = "rockchip,rk3399-usb2phy";
+      reg = <0xe450 0x10>;
+      clocks = <&cru SCLK_USB2PHY0_REF>;
+      clock-names = "phyclk";
+      clock-output-names = "clk_usbphy0_480m";
+      #clock-cells = <0>;
+      #phy-cells = <0>;
+
+      u2phy0_host: host-port {
+        #phy-cells = <0>;
+        interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>;
+        interrupt-names = "linestate";
+      };
+
+      u2phy0_otg: otg-port {
+        #phy-cells = <0>;
+        interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>,
+                     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>,
+                     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>;
+        interrupt-names = "otg-bvalid", "otg-id", "linestate";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
index 452cee1..3f913d6 100644
--- a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
+++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
@@ -146,7 +146,7 @@
       bindings specified in
       Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt
       Torrent SERDES should follow the bindings specified in
-      Documentation/devicetree/bindings/phy/phy-cadence-dp.txt
+      Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
 
 required:
   - compatible
@@ -159,6 +159,8 @@
   - "#reset-cells"
   - ranges
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/soc/ti,sci_pm_domain.h>
diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
index 135c7df..7651a67 100644
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
@@ -57,6 +57,8 @@
 required:
   - compatible
 
+additionalProperties: false
+
 examples:
   - |
     syscon: scu@1e6e2000 {
diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
index 824f7fd1..36feaf5 100644
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
@@ -70,6 +70,8 @@
   - compatible
   - aspeed,external-nodes
 
+additionalProperties: false
+
 examples:
   - |
     apb {
diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
index ac8d1c3..45af29bc 100644
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
@@ -92,6 +92,8 @@
 required:
   - compatible
 
+additionalProperties: false
+
 examples:
   - |
     syscon: scu@1e6e2000 {
diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
index eb39f50..e8abbda 100644
--- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
@@ -38,7 +38,7 @@
   0xffffffff 0x7fff3ccf  /* pioB */
   0xffffffff 0x007fffff  /* pioC */
 
-For each peripheral/bank we will descibe in a u32 if a pin can be
+For each peripheral/bank we will describe in a u32 if a pin can be
 configured in it by putting 1 to the pin bit (1 << pin)
 
 Let's take the pioA on peripheral B
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt
deleted file mode 100644
index e4e01c0..0000000
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-* Freescale IMX8MM IOMUX Controller
-
-Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
-for common binding part and usage.
-
-Required properties:
-- compatible: "fsl,imx8mm-iomuxc"
-- reg: should contain the base physical address and size of the iomuxc
-  registers.
-
-Required properties in sub-nodes:
-- fsl,pins: each entry consists of 6 integers and represents the mux and config
-  setting for one pin.  The first 5 integers <mux_reg conf_reg input_reg mux_val
-  input_val> are specified using a PIN_FUNC_ID macro, which can be found in
-  <arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h>. The last integer CONFIG is
-  the pad setting value like pull-up on this pin.  Please refer to i.MX8M Mini
-  Reference Manual for detailed CONFIG settings.
-
-Examples:
-
-&uart1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_uart1>;
-};
-
-iomuxc: pinctrl@30330000 {
-        compatible = "fsl,imx8mm-iomuxc";
-        reg = <0x0 0x30330000 0x0 0x10000>;
-
-        pinctrl_uart1: uart1grp {
-                fsl,pins = <
-                        MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX             0x140
-                        MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX             0x140
-                >;
-        };
-};
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml
new file mode 100644
index 0000000..d98a386
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,imx8mm-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale IMX8MM IOMUX Controller
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+description:
+  Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
+  for common binding part and usage.
+
+properties:
+  compatible:
+    const: fsl,imx8mm-iomuxc
+
+  reg:
+    maxItems: 1
+
+# Client device subnode's properties
+patternProperties:
+  'grp$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      fsl,pins:
+        description:
+          each entry consists of 6 integers and represents the mux and config
+          setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
+          mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
+          be found in <arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h>. The last
+          integer CONFIG is the pad setting value like pull-up on this pin. Please
+          refer to i.MX8M Mini Reference Manual for detailed CONFIG settings.
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/uint32-matrix
+          - items:
+              items:
+                - description: |
+                    "mux_reg" indicates the offset of mux register.
+                - description: |
+                    "conf_reg" indicates the offset of pad configuration register.
+                - description: |
+                    "input_reg" indicates the offset of select input register.
+                - description: |
+                    "mux_val" indicates the mux value to be applied.
+                - description: |
+                    "input_val" indicates the select input value to be applied.
+                - description: |
+                    "pad_setting" indicates the pad configuration value to be applied.
+
+    required:
+      - fsl,pins
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Pinmux controller node
+  - |
+    iomuxc: pinctrl@30330000 {
+        compatible = "fsl,imx8mm-iomuxc";
+        reg = <0x30330000 0x10000>;
+
+        pinctrl_uart2: uart2grp {
+            fsl,pins =
+                <0x23C 0x4A4 0x4FC 0x0 0x0	0x140>,
+                <0x240 0x4A8 0x000 0x0 0x0	0x140>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.txt
deleted file mode 100644
index 330716c..0000000
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-* Freescale IMX8MN IOMUX Controller
-
-Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
-for common binding part and usage.
-
-Required properties:
-- compatible: "fsl,imx8mn-iomuxc"
-- reg: should contain the base physical address and size of the iomuxc
-  registers.
-
-Required properties in sub-nodes:
-- fsl,pins: each entry consists of 6 integers and represents the mux and config
-  setting for one pin.  The first 5 integers <mux_reg conf_reg input_reg mux_val
-  input_val> are specified using a PIN_FUNC_ID macro, which can be found in
-  <arch/arm64/boot/dts/freescale/imx8mn-pinfunc.h>. The last integer CONFIG is
-  the pad setting value like pull-up on this pin. Please refer to i.MX8M Nano
-  Reference Manual for detailed CONFIG settings.
-
-Examples:
-
-&uart1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_uart1>;
-};
-
-iomuxc: pinctrl@30330000 {
-        compatible = "fsl,imx8mn-iomuxc";
-        reg = <0x0 0x30330000 0x0 0x10000>;
-
-        pinctrl_uart1: uart1grp {
-                fsl,pins = <
-			MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
-			MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
-			MX8MN_IOMUXC_UART3_RXD_UART1_DCE_CTS_B	0x140
-			MX8MN_IOMUXC_UART3_TXD_UART1_DCE_RTS_B	0x140
-			MX8MN_IOMUXC_SD1_DATA4_GPIO2_IO6	0x19
-                >;
-        };
-};
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml
new file mode 100644
index 0000000..b9aa180
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,imx8mn-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale IMX8MN IOMUX Controller
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+description:
+  Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
+  for common binding part and usage.
+
+properties:
+  compatible:
+    const: fsl,imx8mn-iomuxc
+
+  reg:
+    maxItems: 1
+
+# Client device subnode's properties
+patternProperties:
+  'grp$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      fsl,pins:
+        description:
+          each entry consists of 6 integers and represents the mux and config
+          setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
+          mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
+          be found in <arch/arm64/boot/dts/freescale/imx8mn-pinfunc.h>. The last
+          integer CONFIG is the pad setting value like pull-up on this pin. Please
+          refer to i.MX8M Nano Reference Manual for detailed CONFIG settings.
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/uint32-matrix
+          - items:
+              items:
+                - description: |
+                    "mux_reg" indicates the offset of mux register.
+                - description: |
+                    "conf_reg" indicates the offset of pad configuration register.
+                - description: |
+                    "input_reg" indicates the offset of select input register.
+                - description: |
+                    "mux_val" indicates the mux value to be applied.
+                - description: |
+                    "input_val" indicates the select input value to be applied.
+                - description: |
+                    "pad_setting" indicates the pad configuration value to be applied.
+
+    required:
+      - fsl,pins
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Pinmux controller node
+  - |
+    iomuxc: pinctrl@30330000 {
+        compatible = "fsl,imx8mn-iomuxc";
+        reg = <0x30330000 0x10000>;
+
+        pinctrl_uart2: uart2grp {
+            fsl,pins =
+                <0x23C 0x4A4 0x4FC 0x0 0x0	0x140>,
+                <0x240 0x4A8 0x000 0x0 0x0	0x140>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml
index 2e31e12..6297e78 100644
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml
@@ -30,8 +30,6 @@
 
     properties:
       fsl,pins:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32-array
         description:
           each entry consists of 6 integers and represents the mux and config
           setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
@@ -39,6 +37,22 @@
           be found in <arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h>. The last
           integer CONFIG is the pad setting value like pull-up on this pin. Please
           refer to i.MX8M Plus Reference Manual for detailed CONFIG settings.
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/uint32-matrix
+          - items:
+              items:
+                - description: |
+                    "mux_reg" indicates the offset of mux register.
+                - description: |
+                    "conf_reg" indicates the offset of pad configuration register.
+                - description: |
+                    "input_reg" indicates the offset of select input register.
+                - description: |
+                    "mux_val" indicates the mux value to be applied.
+                - description: |
+                    "input_val" indicates the select input value to be applied.
+                - description: |
+                    "pad_setting" indicates the pad configuration value to be applied.
 
     required:
       - fsl,pins
@@ -59,10 +73,9 @@
         reg = <0x30330000 0x10000>;
 
         pinctrl_uart2: uart2grp {
-            fsl,pins = <
-                0x228 0x488 0x5F0 0x0 0x6	0x49
-                0x228 0x488 0x000 0x0 0x0	0x49
-            >;
+            fsl,pins =
+                <0x228 0x488 0x5F0 0x0 0x6	0x49>,
+                <0x228 0x488 0x000 0x0 0x0	0x49>;
         };
     };
 
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.txt
deleted file mode 100644
index 66de750..0000000
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-* Freescale IMX8MQ IOMUX Controller
-
-Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
-for common binding part and usage.
-
-Required properties:
-- compatible: "fsl,imx8mq-iomuxc"
-- reg: should contain the base physical address and size of the iomuxc
-  registers.
-
-Required properties in sub-nodes:
-- fsl,pins: each entry consists of 6 integers and represents the mux and config
-  setting for one pin.  The first 5 integers <mux_reg conf_reg input_reg mux_val
-  input_val> are specified using a PIN_FUNC_ID macro, which can be found in
-  imx8mq-pinfunc.h under device tree source folder.  The last integer CONFIG is
-  the pad setting value like pull-up on this pin.  Please refer to i.MX8M Quad
-  Reference Manual for detailed CONFIG settings.
-
-Examples:
-
-&uart1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_uart1>;
-};
-
-iomuxc: pinctrl@30330000 {
-        compatible = "fsl,imx8mq-iomuxc";
-        reg = <0x0 0x30330000 0x0 0x10000>;
-
-        pinctrl_uart1: uart1grp {
-                fsl,pins = <
-                        MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX             0x49
-                        MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX             0x49
-                >;
-        };
-};
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.yaml
new file mode 100644
index 0000000..b30c704
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,imx8mq-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale IMX8MQ IOMUX Controller
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+description:
+  Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
+  for common binding part and usage.
+
+properties:
+  compatible:
+    const: fsl,imx8mq-iomuxc
+
+  reg:
+    maxItems: 1
+
+# Client device subnode's properties
+patternProperties:
+  'grp$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      fsl,pins:
+        description:
+          each entry consists of 6 integers and represents the mux and config
+          setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
+          mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
+          be found in <arch/arm64/boot/dts/freescale/imx8mq-pinfunc.h>. The last
+          integer CONFIG is the pad setting value like pull-up on this pin. Please
+          refer to i.MX8M Quad Reference Manual for detailed CONFIG settings.
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/uint32-matrix
+          - items:
+              items:
+                - description: |
+                    "mux_reg" indicates the offset of mux register.
+                - description: |
+                    "conf_reg" indicates the offset of pad configuration register.
+                - description: |
+                    "input_reg" indicates the offset of select input register.
+                - description: |
+                    "mux_val" indicates the mux value to be applied.
+                - description: |
+                    "input_val" indicates the select input value to be applied.
+                - description: |
+                    "pad_setting" indicates the pad configuration value to be applied.
+
+    required:
+      - fsl,pins
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Pinmux controller node
+  - |
+    iomuxc: pinctrl@30330000 {
+        compatible = "fsl,imx8mq-iomuxc";
+        reg = <0x30330000 0x10000>;
+
+        pinctrl_uart1: uart1grp {
+            fsl,pins =
+                <0x234 0x49C 0x4F4 0x0 0x0	0x49>,
+                <0x238 0x4A0 0x4F4 0x0 0x0	0x49>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
new file mode 100644
index 0000000..63d1cfe
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
@@ -0,0 +1,153 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,ipq6018-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. IPQ6018 TLMM block
+
+maintainers:
+  - Sricharan R <sricharan@codeaurora.org>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer block found in the
+  IPQ6018 platform.
+
+properties:
+  compatible:
+    const: qcom,ipq6018-pinctrl
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: Specifies the TLMM summary IRQ
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description:
+      Specifies the PIN numbers and Flags, as defined in defined in
+      include/dt-bindings/interrupt-controller/irq.h
+    const: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+#PIN CONFIGURATION NODES
+patternProperties:
+  '-pinmux$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    allOf:
+      - $ref: "/schemas/pinctrl/pincfg-node.yaml"
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([1-9]|[1-7][0-9]|80)$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd,
+              sdc2_data, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2,
+              qdsd_data3 ]
+        minItems: 1
+        maxItems: 4
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ adsp_ext, alsp_int, atest_bbrx0, atest_bbrx1, atest_char,
+          atest_char0, atest_char1, atest_char2, atest_char3, atest_combodac,
+          atest_gpsadc0, atest_gpsadc1, atest_tsens, atest_wlan0,
+          atest_wlan1, backlight_en, bimc_dte0, bimc_dte1, blsp1_i2c,
+          blsp2_i2c, blsp3_i2c, blsp4_i2c, blsp5_i2c, blsp6_i2c,  blsp1_spi,
+          blsp1_spi_cs1, blsp1_spi_cs2, blsp1_spi_cs3, blsp2_spi,
+          blsp2_spi_cs1, blsp2_spi_cs2, blsp2_spi_cs3, blsp3_spi,
+          blsp3_spi_cs1, blsp3_spi_cs2, blsp3_spi_cs3, blsp4_spi, blsp5_spi,
+          blsp6_spi, blsp1_uart, blsp2_uart, blsp1_uim, blsp2_uim, cam1_rst,
+          cam1_standby, cam_mclk0, cam_mclk1, cci_async, cci_i2c, cci_timer0,
+          cci_timer1, cci_timer2, cdc_pdm0, codec_mad, dbg_out, display_5v,
+          dmic0_clk, dmic0_data, dsi_rst, ebi0_wrcdc, euro_us, ext_lpass,
+          flash_strobe, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a,
+          gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gpio, gsm0_tx0,
+          gsm0_tx1, gsm1_tx0, gsm1_tx1, gyro_accl, kpsns0, kpsns1, kpsns2,
+          ldo_en, ldo_update, mag_int, mdp_vsync, modem_tsync, m_voc,
+          nav_pps, nav_tsync, pa_indicator, pbs0, pbs1, pbs2, pri_mi2s,
+          pri_mi2s_ws, prng_rosc, pwr_crypto_enabled_a, pwr_crypto_enabled_b,
+          pwr_modem_enabled_a,  pwr_modem_enabled_b, pwr_nav_enabled_a,
+          pwr_nav_enabled_b, qdss_ctitrig_in_a0, qdss_ctitrig_in_a1,
+          qdss_ctitrig_in_b0, qdss_ctitrig_in_b1, qdss_ctitrig_out_a0,
+          qdss_ctitrig_out_a1, qdss_ctitrig_out_b0, qdss_ctitrig_out_b1,
+          qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b,
+          qdss_tracedata_a, qdss_tracedata_b, reset_n, sd_card, sd_write,
+          sec_mi2s, smb_int, ssbi_wtr0, ssbi_wtr1, uim1, uim2, uim3,
+          uim_batt, wcss_bt, wcss_fm, wcss_wlan, webcam1_rst ]
+
+      drive-strength:
+        enum: [2, 4, 6, 8, 10, 12, 14, 16]
+        default: 2
+        description:
+          Selects the drive strength for the specified pins, in mA.
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      bias-disable: true
+
+      output-high: true
+
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        tlmm: pinctrl@1000000 {
+              compatible = "qcom,ipq6018-pinctrl";
+              reg = <0x01000000 0x300000>;
+              interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+              interrupt-controller;
+              #interrupt-cells = <2>;
+              gpio-controller;
+              #gpio-cells = <2>;
+              gpio-ranges = <&tlmm 0 80>;
+
+              serial3-pinmux {
+                      pins = "gpio44", "gpio45";
+                      function = "blsp2_uart";
+                      drive-strength = <8>;
+                      bias-pull-down;
+              };
+        };
diff --git a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.txt
deleted file mode 100644
index 8173b12..0000000
--- a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-UniPhier SoCs pin controller
-
-Required properties:
-- compatible: should be one of the following:
-    "socionext,uniphier-ld4-pinctrl"  - for LD4 SoC
-    "socionext,uniphier-pro4-pinctrl" - for Pro4 SoC
-    "socionext,uniphier-sld8-pinctrl" - for sLD8 SoC
-    "socionext,uniphier-pro5-pinctrl" - for Pro5 SoC
-    "socionext,uniphier-pxs2-pinctrl" - for PXs2 SoC
-    "socionext,uniphier-ld6b-pinctrl" - for LD6b SoC
-    "socionext,uniphier-ld11-pinctrl" - for LD11 SoC
-    "socionext,uniphier-ld20-pinctrl" - for LD20 SoC
-    "socionext,uniphier-pxs3-pinctrl" - for PXs3 SoC
-
-Note:
-The UniPhier pinctrl should be a subnode of a "syscon" compatible node.
-
-Example:
-	soc-glue@5f800000 {
-		compatible = "socionext,uniphier-pro4-soc-glue",
-			     "simple-mfd", "syscon";
-		reg = <0x5f800000 0x2000>;
-
-		pinctrl: pinctrl {
-			compatible = "socionext,uniphier-pro4-pinctrl";
-		};
-	};
diff --git a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
new file mode 100644
index 0000000..f8a93d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/socionext,uniphier-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier SoCs pin controller
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+properties:
+  $nodename:
+    pattern: "pinctrl"
+
+  compatible:
+    enum:
+      - socionext,uniphier-ld4-pinctrl
+      - socionext,uniphier-pro4-pinctrl
+      - socionext,uniphier-sld8-pinctrl
+      - socionext,uniphier-pro5-pinctrl
+      - socionext,uniphier-pxs2-pinctrl
+      - socionext,uniphier-ld6b-pinctrl
+      - socionext,uniphier-ld11-pinctrl
+      - socionext,uniphier-ld20-pinctrl
+      - socionext,uniphier-pxs3-pinctrl
+
+required:
+  - compatible
+
+examples:
+  - |
+    // The UniPhier pinctrl should be a subnode of a "syscon" compatible node.
+
+    soc-glue@5f800000 {
+        compatible = "socionext,uniphier-pro4-soc-glue", "simple-mfd", "syscon";
+        reg = <0x5f800000 0x2000>;
+
+        pinctrl: pinctrl {
+            compatible = "socionext,uniphier-pro4-pinctrl";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
index ef4de32..46a0478 100644
--- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
@@ -194,6 +194,8 @@
   - ranges
   - pins-are-numbered
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/pinctrl/stm32-pinfunc.h>
diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
index d3098c9..6c6079f 100644
--- a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
+++ b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
@@ -68,6 +68,8 @@
   - "#power-domain-cells"
   - amlogic,ao-sysctrl
 
+additionalProperties: false
+
 examples:
   - |
     pwrc: power-controller {
diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml
new file mode 100644
index 0000000..bc4e037
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+# Copyright (c) 2019 Amlogic, Inc
+# Author: Jianxin Pan <jianxin.pan@amlogic.com>
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/amlogic,meson-sec-pwrc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic Meson Secure Power Domains
+
+maintainers:
+  - Jianxin Pan <jianxin.pan@amlogic.com>
+
+description: |+
+  Secure Power Domains used in Meson A1/C1 SoCs, and should be the child node
+  of secure-monitor.
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson-a1-pwrc
+
+  "#power-domain-cells":
+    const: 1
+
+required:
+  - compatible
+  - "#power-domain-cells"
+
+examples:
+  - |
+    secure-monitor {
+        compatible = "amlogic,meson-gxbb-sm";
+
+        pwrc: power-controller {
+            compatible = "amlogic,meson-a1-pwrc";
+            #power-domain-cells = <1>;
+        };
+    };
+
diff --git a/Documentation/devicetree/bindings/power/power-domain.yaml b/Documentation/devicetree/bindings/power/power-domain.yaml
index 6047aac..ff5936e 100644
--- a/Documentation/devicetree/bindings/power/power-domain.yaml
+++ b/Documentation/devicetree/bindings/power/power-domain.yaml
@@ -114,18 +114,18 @@
         domain-idle-states = <&DOMAIN_PWR_DN>;
     };
 
-    DOMAIN_RET: state@0 {
-        compatible = "domain-idle-state";
-        reg = <0x0 0x0>;
-        entry-latency-us = <1000>;
-        exit-latency-us = <2000>;
-        min-residency-us = <10000>;
-    };
+    domain-idle-states {
+        DOMAIN_RET: domain-retention {
+            compatible = "domain-idle-state";
+            entry-latency-us = <1000>;
+            exit-latency-us = <2000>;
+            min-residency-us = <10000>;
+        };
 
-    DOMAIN_PWR_DN: state@1 {
-        compatible = "domain-idle-state";
-        reg = <0x1 0x0>;
-        entry-latency-us = <5000>;
-        exit-latency-us = <8000>;
-        min-residency-us = <7000>;
+        DOMAIN_PWR_DN: domain-pwr-dn {
+            compatible = "domain-idle-state";
+            entry-latency-us = <5000>;
+            exit-latency-us = <8000>;
+            min-residency-us = <7000>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/power/renesas,apmu.txt b/Documentation/devicetree/bindings/power/renesas,apmu.txt
deleted file mode 100644
index 5f24586..0000000
--- a/Documentation/devicetree/bindings/power/renesas,apmu.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-DT bindings for the Renesas Advanced Power Management Unit
-
-Renesas R-Car and RZ/G1 SoCs utilize one or more APMU hardware units
-for CPU core power domain control including SMP boot and CPU Hotplug.
-
-Required properties:
-
-- compatible: Should be "renesas,<soctype>-apmu", "renesas,apmu" as fallback.
-	      Examples with soctypes are:
-		- "renesas,r8a7743-apmu" (RZ/G1M)
-		- "renesas,r8a7744-apmu" (RZ/G1N)
-		- "renesas,r8a7745-apmu" (RZ/G1E)
-		- "renesas,r8a77470-apmu" (RZ/G1C)
-		- "renesas,r8a7790-apmu" (R-Car H2)
-		- "renesas,r8a7791-apmu" (R-Car M2-W)
-		- "renesas,r8a7792-apmu" (R-Car V2H)
-		- "renesas,r8a7793-apmu" (R-Car M2-N)
-		- "renesas,r8a7794-apmu" (R-Car E2)
-
-- reg: Base address and length of the I/O registers used by the APMU.
-
-- cpus: This node contains a list of CPU cores, which should match the order
-  of CPU cores used by the WUPCR and PSTR registers in the Advanced Power
-  Management Unit section of the device's datasheet.
-
-
-Example:
-
-This shows the r8a7791 APMU that can control CPU0 and CPU1.
-
-	apmu@e6152000 {
-		compatible = "renesas,r8a7791-apmu", "renesas,apmu";
-		reg = <0 0xe6152000 0 0x188>;
-		cpus = <&cpu0 &cpu1>;
-	};
diff --git a/Documentation/devicetree/bindings/power/renesas,apmu.yaml b/Documentation/devicetree/bindings/power/renesas,apmu.yaml
new file mode 100644
index 0000000..078b2cb
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/renesas,apmu.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/renesas,apmu.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas Advanced Power Management Unit
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+  - Magnus Damm <magnus.damm@gmail.com>
+
+description:
+  Renesas R-Car Gen2 and RZ/G1 SoCs utilize one or more APMU hardware units for
+  CPU core power domain control including SMP boot and CPU Hotplug.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r8a7743-apmu  # RZ/G1M
+          - renesas,r8a7744-apmu  # RZ/G1N
+          - renesas,r8a7745-apmu  # RZ/G1E
+          - renesas,r8a77470-apmu # RZ/G1C
+          - renesas,r8a7790-apmu  # R-Car H2
+          - renesas,r8a7791-apmu  # R-Car M2-W
+          - renesas,r8a7792-apmu  # R-Car V2H
+          - renesas,r8a7793-apmu  # R-Car M2-N
+          - renesas,r8a7794-apmu  # R-Car E2
+      - const: renesas,apmu
+
+  reg:
+    maxItems: 1
+
+  cpus:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: |
+      Array of phandles pointing to CPU cores, which should match the order of
+      CPU cores used by the WUPCR and PSTR registers in the Advanced Power
+      Management Unit section of the device's datasheet.
+
+required:
+  - compatible
+  - reg
+  - cpus
+
+additionalProperties: false
+
+examples:
+  - |
+    apmu@e6152000 {
+            compatible = "renesas,r8a7791-apmu", "renesas,apmu";
+            reg = <0xe6152000 0x188>;
+            cpus = <&cpu0 &cpu1>;
+    };
diff --git a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt
deleted file mode 100644
index acb41fa..0000000
--- a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt
+++ /dev/null
@@ -1,62 +0,0 @@
-DT bindings for the Renesas R-Car (RZ/G) System Controller
-
-== System Controller Node ==
-
-The R-Car (RZ/G) System Controller provides power management for the CPU cores
-and various coprocessors.
-
-Required properties:
-  - compatible: Must contain exactly one of the following:
-      - "renesas,r8a7743-sysc" (RZ/G1M)
-      - "renesas,r8a7744-sysc" (RZ/G1N)
-      - "renesas,r8a7745-sysc" (RZ/G1E)
-      - "renesas,r8a77470-sysc" (RZ/G1C)
-      - "renesas,r8a774a1-sysc" (RZ/G2M)
-      - "renesas,r8a774b1-sysc" (RZ/G2N)
-      - "renesas,r8a774c0-sysc" (RZ/G2E)
-      - "renesas,r8a7779-sysc" (R-Car H1)
-      - "renesas,r8a7790-sysc" (R-Car H2)
-      - "renesas,r8a7791-sysc" (R-Car M2-W)
-      - "renesas,r8a7792-sysc" (R-Car V2H)
-      - "renesas,r8a7793-sysc" (R-Car M2-N)
-      - "renesas,r8a7794-sysc" (R-Car E2)
-      - "renesas,r8a7795-sysc" (R-Car H3)
-      - "renesas,r8a7796-sysc" (R-Car M3-W)
-      - "renesas,r8a77961-sysc" (R-Car M3-W+)
-      - "renesas,r8a77965-sysc" (R-Car M3-N)
-      - "renesas,r8a77970-sysc" (R-Car V3M)
-      - "renesas,r8a77980-sysc" (R-Car V3H)
-      - "renesas,r8a77990-sysc" (R-Car E3)
-      - "renesas,r8a77995-sysc" (R-Car D3)
-  - reg: Address start and address range for the device.
-  - #power-domain-cells: Must be 1.
-
-
-Example:
-
-	sysc: system-controller@e6180000 {
-		compatible = "renesas,r8a7791-sysc";
-		reg = <0 0xe6180000 0 0x0200>;
-		#power-domain-cells = <1>;
-	};
-
-
-== PM Domain Consumers ==
-
-Devices residing in a power area must refer to that power area, as documented
-by the generic PM domain bindings in
-Documentation/devicetree/bindings/power/power_domain.txt.
-
-Required properties:
-  - power-domains: A phandle and symbolic PM domain specifier, as defined in
-		   <dt-bindings/power/r8a77*-sysc.h>.
-
-
-Example:
-
-	L2_CA15: cache-controller@0 {
-		compatible = "cache";
-		power-domains = <&sysc R8A7791_PD_CA15_SCU>;
-		cache-unified;
-		cache-level = <2>;
-	};
diff --git a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml
new file mode 100644
index 0000000..e59331e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/renesas,rcar-sysc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas R-Car and RZ/G System Controller
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+  - Magnus Damm <magnus.damm@gmail.com>
+
+description:
+  The R-Car (RZ/G) System Controller provides power management for the CPU
+  cores and various coprocessors.
+
+properties:
+  compatible:
+    enum:
+      - renesas,r8a7743-sysc  # RZ/G1M
+      - renesas,r8a7744-sysc  # RZ/G1N
+      - renesas,r8a7745-sysc  # RZ/G1E
+      - renesas,r8a77470-sysc # RZ/G1C
+      - renesas,r8a774a1-sysc # RZ/G2M
+      - renesas,r8a774b1-sysc # RZ/G2N
+      - renesas,r8a774c0-sysc # RZ/G2E
+      - renesas,r8a7779-sysc  # R-Car H1
+      - renesas,r8a7790-sysc  # R-Car H2
+      - renesas,r8a7791-sysc  # R-Car M2-W
+      - renesas,r8a7792-sysc  # R-Car V2H
+      - renesas,r8a7793-sysc  # R-Car M2-N
+      - renesas,r8a7794-sysc  # R-Car E2
+      - renesas,r8a7795-sysc  # R-Car H3
+      - renesas,r8a77961-sysc # R-Car M3-W+
+      - renesas,r8a77965-sysc # R-Car M3-N
+      - renesas,r8a7796-sysc  # R-Car M3-W
+      - renesas,r8a77970-sysc # R-Car V3M
+      - renesas,r8a77980-sysc # R-Car V3H
+      - renesas,r8a77990-sysc # R-Car E3
+      - renesas,r8a77995-sysc # R-Car D3
+
+  reg:
+    maxItems: 1
+
+  '#power-domain-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    // System Controller node
+    sysc: system-controller@e6180000 {
+            compatible = "renesas,r8a7791-sysc";
+            reg = <0xe6180000 0x0200>;
+            #power-domain-cells = <1>;
+    };
+
+  - |
+    // Power Domain consumers
+    #include <dt-bindings/power/r8a7791-sysc.h>
+
+    cache-controller-0 {
+            compatible = "cache";
+            power-domains = <&sysc R8A7791_PD_CA15_SCU>;
+            cache-unified;
+            cache-level = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml
index 520e07e..3412fe7 100644
--- a/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml
+++ b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml
@@ -41,6 +41,8 @@
   - regmap
   - offset
 
+additionalProperties: false
+
 allOf:
   - if:
       not:
diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
index d38006b..b80772c 100644
--- a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
+++ b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
@@ -41,6 +41,8 @@
   - regmap
   - offset
 
+additionalProperties: false
+
 allOf:
   - if:
       not:
diff --git a/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml b/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml
index deef010..62eeddb 100644
--- a/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml
+++ b/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml
@@ -32,3 +32,6 @@
 
 required:
   - compatible
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml b/Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml
index 9e21b83..239b49f 100644
--- a/Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml
+++ b/Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml
@@ -55,6 +55,8 @@
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     i2c@1 {
diff --git a/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.txt b/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.txt
deleted file mode 100644
index 472bd46..0000000
--- a/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-* PWM controlled by ChromeOS EC
-
-Google's ChromeOS EC PWM is a simple PWM attached to the Embedded Controller
-(EC) and controlled via a host-command interface.
-
-An EC PWM node should be only found as a sub-node of the EC node (see
-Documentation/devicetree/bindings/mfd/cros-ec.txt).
-
-Required properties:
-- compatible: Must contain "google,cros-ec-pwm"
-- #pwm-cells: Should be 1. The cell specifies the PWM index.
-
-Example:
-	cros-ec@0 {
-		compatible = "google,cros-ec-spi";
-
-		...
-
-		cros_ec_pwm: ec-pwm {
-			compatible = "google,cros-ec-pwm";
-			#pwm-cells = <1>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml b/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml
new file mode 100644
index 0000000..41ece1d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/google,cros-ec-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PWM controlled by ChromeOS EC
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - '"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>'
+
+description: |
+  Google's ChromeOS EC PWM is a simple PWM attached to the Embedded Controller
+  (EC) and controlled via a host-command interface.
+  An EC PWM node should be only found as a sub-node of the EC node (see
+  Documentation/devicetree/bindings/mfd/cros-ec.txt).
+
+properties:
+  compatible:
+    const: google,cros-ec-pwm
+  "#pwm-cells":
+    description: The cell specifies the PWM index.
+    const: 1
+
+required:
+  - compatible
+  - '#pwm-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cros-ec@0 {
+            compatible = "google,cros-ec-spi";
+            reg = <0>;
+
+            cros_ec_pwm: ec-pwm {
+                compatible = "google,cros-ec-pwm";
+                #pwm-cells = <1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pwm/iqs620a-pwm.yaml b/Documentation/devicetree/bindings/pwm/iqs620a-pwm.yaml
new file mode 100644
index 0000000..1d7c27b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/iqs620a-pwm.yaml
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/iqs620a-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Azoteq IQS620A PWM Generator
+
+maintainers:
+  - Jeff LaBundy <jeff@labundy.com>
+
+description: |
+  The Azoteq IQS620A multi-function sensor generates a fixed-frequency PWM
+  output represented by a "pwm" child node from the parent MFD driver. See
+  Documentation/devicetree/bindings/mfd/iqs62x.yaml for further details as
+  well as an example.
+
+properties:
+  compatible:
+    enum:
+      - azoteq,iqs620a-pwm
+
+  "#pwm-cells":
+    const: 2
+
+required:
+  - compatible
+  - "#pwm-cells"
+
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt
index 0a69ead..74c41e3 100644
--- a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt
+++ b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt
@@ -9,6 +9,7 @@
   - "nvidia,tegra132-pwm", "nvidia,tegra20-pwm": for Tegra132
   - "nvidia,tegra210-pwm", "nvidia,tegra20-pwm": for Tegra210
   - "nvidia,tegra186-pwm": for Tegra186
+  - "nvidia,tegra194-pwm": for Tegra194
 - reg: physical base address and length of the controller's registers
 - #pwm-cells: should be 2. See pwm.yaml in this directory for a description of
   the cells format.
diff --git a/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt b/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt
index 95536d83..29adff5 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt
@@ -19,10 +19,15 @@
    - "pwm1-8": the eight per PWM clocks for mt2712
    - "pwm1-6": the six per PWM clocks for mt7622
    - "pwm1-5": the five per PWM clocks for mt7623
+   - "pwm1"  : the PWM1 clock for mt7629
  - pinctrl-names: Must contain a "default" entry.
  - pinctrl-0: One property must exist for each entry in pinctrl-names.
    See pinctrl/pinctrl-bindings.txt for details of the property values.
 
+Optional properties:
+- assigned-clocks: Reference to the PWM clock entries.
+- assigned-clock-parents: The phandle of the parent clock of PWM clock.
+
 Example:
 	pwm0: pwm@11006000 {
 		compatible = "mediatek,mt7623-pwm";
diff --git a/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.yaml b/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.yaml
index 4969a95..4bf62a3 100644
--- a/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.yaml
+++ b/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.yaml
@@ -19,6 +19,10 @@
           - renesas,tpu-r8a7744   # RZ/G1N
           - renesas,tpu-r8a7745   # RZ/G1E
           - renesas,tpu-r8a7790   # R-Car H2
+          - renesas,tpu-r8a7791   # R-Car M2-W
+          - renesas,tpu-r8a7792   # R-Car V2H
+          - renesas,tpu-r8a7793   # R-Car M2-N
+          - renesas,tpu-r8a7794   # R-Car E2
           - renesas,tpu-r8a7795   # R-Car H3
           - renesas,tpu-r8a7796   # R-Car M3-W
           - renesas,tpu-r8a77965  # R-Car M3-N
diff --git a/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml
index 7d72415..ce0a402 100644
--- a/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml
@@ -24,8 +24,11 @@
     const: maxim,max77650-regulator
 
 patternProperties:
-  "^regulator@[0-3]$":
+  "^regulator-(ldo|sbb[0-2])$":
     $ref: "regulator.yaml#"
 
 required:
   - compatible
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.txt b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.txt
deleted file mode 100644
index cbce62c..0000000
--- a/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.txt
+++ /dev/null
@@ -1,162 +0,0 @@
-ROHM BD71837 and BD71847 Power Management Integrated Circuit regulator bindings
-
-Required properties:
- - regulator-name: should be "buck1", ..., "buck8" and "ldo1", ..., "ldo7" for
-                   BD71837. For BD71847 names should be "buck1", ..., "buck6"
-		   and "ldo1", ..., "ldo6"
-
-List of regulators provided by this controller. BD71837 regulators node
-should be sub node of the BD71837 MFD node. See BD71837 MFD bindings at
-Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt
-Regulator nodes should be named to BUCK_<number> and LDO_<number>. The
-definition for each of these nodes is defined using the standard
-binding for regulators at
-Documentation/devicetree/bindings/regulator/regulator.txt.
-Note that if BD71837 starts at RUN state you probably want to use
-regulator-boot-on at least for BUCK6 and BUCK7 so that those are not
-disabled by driver at startup. LDO5 and LDO6 are supplied by those and
-if they are disabled at startup the voltage monitoring for LDO5/LDO6 will
-cause PMIC to reset.
-
-The valid names for BD71837 regulator nodes are:
-BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6, BUCK7, BUCK8
-LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7
-
-The valid names for BD71847 regulator nodes are:
-BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6
-LDO1, LDO2, LDO3, LDO4, LDO5, LDO6
-
-Optional properties:
-- rohm,dvs-run-voltage		: PMIC default "RUN" state voltage in uV.
-				  See below table for bucks which support this.
-- rohm,dvs-idle-voltage		: PMIC default "IDLE" state voltage in uV.
-				  See below table for bucks which support this.
-- rohm,dvs-suspend-voltage	: PMIC default "SUSPEND" state voltage in uV.
-				  See below table for bucks which support this.
-- Any optional property defined in bindings/regulator/regulator.txt
-
-Supported default DVS states:
-
-BD71837:
-buck	| dvs-run-voltage	| dvs-idle-voltage	| dvs-suspend-voltage
------------------------------------------------------------------------------
-1	| supported		| supported		| supported
-----------------------------------------------------------------------------
-2	| supported		| supported		| not supported
-----------------------------------------------------------------------------
-3	| supported		| not supported		| not supported
-----------------------------------------------------------------------------
-4	| supported		| not supported		| not supported
-----------------------------------------------------------------------------
-rest	| not supported		| not supported		| not supported
-
-BD71847:
-buck	| dvs-run-voltage	| dvs-idle-voltage	| dvs-suspend-voltage
------------------------------------------------------------------------------
-1	| supported		| supported		| supported
-----------------------------------------------------------------------------
-2	| supported		| supported		| not supported
-----------------------------------------------------------------------------
-rest	| not supported		| not supported		| not supported
-
-Example:
-regulators {
-	buck1: BUCK1 {
-		regulator-name = "buck1";
-		regulator-min-microvolt = <700000>;
-		regulator-max-microvolt = <1300000>;
-		regulator-boot-on;
-		regulator-always-on;
-		regulator-ramp-delay = <1250>;
-		rohm,dvs-run-voltage = <900000>;
-		rohm,dvs-idle-voltage = <850000>;
-		rohm,dvs-suspend-voltage = <800000>;
-	};
-	buck2: BUCK2 {
-		regulator-name = "buck2";
-		regulator-min-microvolt = <700000>;
-		regulator-max-microvolt = <1300000>;
-		regulator-boot-on;
-		regulator-always-on;
-		regulator-ramp-delay = <1250>;
-		rohm,dvs-run-voltage = <1000000>;
-		rohm,dvs-idle-voltage = <900000>;
-	};
-	buck3: BUCK3 {
-		regulator-name = "buck3";
-		regulator-min-microvolt = <700000>;
-		regulator-max-microvolt = <1300000>;
-		regulator-boot-on;
-		rohm,dvs-run-voltage = <1000000>;
-	};
-	buck4: BUCK4 {
-		regulator-name = "buck4";
-		regulator-min-microvolt = <700000>;
-		regulator-max-microvolt = <1300000>;
-		regulator-boot-on;
-		rohm,dvs-run-voltage = <1000000>;
-	};
-	buck5: BUCK5 {
-		regulator-name = "buck5";
-		regulator-min-microvolt = <700000>;
-		regulator-max-microvolt = <1350000>;
-		regulator-boot-on;
-	};
-	buck6: BUCK6 {
-		regulator-name = "buck6";
-		regulator-min-microvolt = <3000000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-	};
-	buck7: BUCK7 {
-		regulator-name = "buck7";
-		regulator-min-microvolt = <1605000>;
-		regulator-max-microvolt = <1995000>;
-		regulator-boot-on;
-	};
-	buck8: BUCK8 {
-		regulator-name = "buck8";
-		regulator-min-microvolt = <800000>;
-		regulator-max-microvolt = <1400000>;
-	};
-
-	ldo1: LDO1 {
-		regulator-name = "ldo1";
-		regulator-min-microvolt = <3000000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-	};
-	ldo2: LDO2 {
-		regulator-name = "ldo2";
-		regulator-min-microvolt = <900000>;
-		regulator-max-microvolt = <900000>;
-		regulator-boot-on;
-	};
-	ldo3: LDO3 {
-		regulator-name = "ldo3";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-	};
-	ldo4: LDO4 {
-		regulator-name = "ldo4";
-		regulator-min-microvolt = <900000>;
-		regulator-max-microvolt = <1800000>;
-	};
-	ldo5: LDO5 {
-		regulator-name = "ldo5";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-	};
-	ldo6: LDO6 {
-		regulator-name = "ldo6";
-		regulator-min-microvolt = <900000>;
-		regulator-max-microvolt = <1800000>;
-	};
-	ldo7_reg: LDO7 {
-		regulator-name = "ldo7";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml
new file mode 100644
index 0000000..a323b16
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/rohm,bd71837-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD71837 Power Management Integrated Circuit regulators
+
+maintainers:
+  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+
+description: |
+  List of regulators provided by this controller. BD71837 regulators node
+  should be sub node of the BD71837 MFD node. See BD71837 MFD bindings at
+  Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml
+  Regulator nodes should be named to BUCK_<number> and LDO_<number>. The
+  definition for each of these nodes is defined using the standard
+  binding for regulators at
+  Documentation/devicetree/bindings/regulator/regulator.txt.
+  Note that if BD71837 starts at RUN state you probably want to use
+  regulator-boot-on at least for BUCK6 and BUCK7 so that those are not
+  disabled by driver at startup. LDO5 and LDO6 are supplied by those and
+  if they are disabled at startup the voltage monitoring for LDO5/LDO6 will
+  cause PMIC to reset.
+
+#The valid names for BD71837 regulator nodes are:
+#BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6, BUCK7, BUCK8
+#LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7
+
+patternProperties:
+  "^LDO[1-7]$":
+    type: object
+    allOf:
+      - $ref: regulator.yaml#
+    description:
+      Properties for single LDO regulator.
+
+    properties:
+      regulator-name:
+        pattern: "^ldo[1-7]$"
+        description:
+          should be "ldo1", ..., "ldo7"
+
+  "^BUCK[1-8]$":
+    type: object
+    allOf:
+      - $ref: regulator.yaml#
+    description:
+      Properties for single BUCK regulator.
+
+    properties:
+      regulator-name:
+        pattern: "^buck[1-8]$"
+        description:
+          should be "buck1", ..., "buck8"
+
+      rohm,dvs-run-voltage:
+        allOf:
+          - $ref: "/schemas/types.yaml#/definitions/uint32"
+          - minimum: 0
+            maximum: 1300000
+        description:
+          PMIC default "RUN" state voltage in uV. See below table for
+          bucks which support this. 0 means disabled.
+
+      rohm,dvs-idle-voltage:
+        allOf:
+          - $ref: "/schemas/types.yaml#/definitions/uint32"
+          - minimum: 0
+            maximum: 1300000
+        description:
+          PMIC default "IDLE" state voltage in uV. See below table for
+          bucks which support this. 0 means disabled.
+
+      rohm,dvs-suspend-voltage:
+        allOf:
+          - $ref: "/schemas/types.yaml#/definitions/uint32"
+          - minimum: 0
+            maximum: 1300000
+        description:
+          PMIC default "SUSPEND" state voltage in uV. See below table for
+          bucks which support this. 0 means disabled.
+
+        # Supported default DVS states:
+        #
+        # BD71837:
+        # buck | dvs-run-voltage | dvs-idle-voltage | dvs-suspend-voltage
+        # ----------------------------------------------------------------
+        # 1    | supported       | supported        | supported
+        # ----------------------------------------------------------------
+        # 2    | supported       | supported        | not supported
+        # ----------------------------------------------------------------
+        # 3    | supported       | not supported    | not supported
+        # ----------------------------------------------------------------
+        # 4    | supported       | not supported    | not supported
+        # ----------------------------------------------------------------
+        # rest | not supported   | not supported    | not supported
+
+
+    required:
+      - regulator-name
+  additionalProperties: false
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml
new file mode 100644
index 0000000..526fd00
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/rohm,bd71847-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD71847 and BD71850 Power Management Integrated Circuit regulators
+
+maintainers:
+  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+
+description: |
+  List of regulators provided by this controller. BD71847 regulators node
+  should be sub node of the BD71847 MFD node. See BD71847 MFD bindings at
+  Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml
+  Regulator nodes should be named to BUCK_<number> and LDO_<number>. The
+  definition for each of these nodes is defined using the standard
+  binding for regulators at
+  Documentation/devicetree/bindings/regulator/regulator.txt.
+  Note that if BD71847 starts at RUN state you probably want to use
+  regulator-boot-on at least for BUCK5. LDO6 is supplied by it and it must
+  not be disabled by driver at startup. If BUCK5 is disabled at startup the
+  voltage monitoring for LDO5/LDO6 can cause PMIC to reset.
+
+#The valid names for BD71847 regulator nodes are:
+#BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6
+#LDO1, LDO2, LDO3, LDO4, LDO5, LDO6
+
+patternProperties:
+  "^LDO[1-6]$":
+    type: object
+    allOf:
+      - $ref: regulator.yaml#
+    description:
+      Properties for single LDO regulator.
+
+    properties:
+      regulator-name:
+        pattern: "^ldo[1-6]$"
+        description:
+          should be "ldo1", ..., "ldo6"
+
+  "^BUCK[1-6]$":
+    type: object
+    allOf:
+      - $ref: regulator.yaml#
+    description:
+      Properties for single BUCK regulator.
+
+    properties:
+      regulator-name:
+        pattern: "^buck[1-6]$"
+        description:
+          should be "buck1", ..., "buck6"
+
+      rohm,dvs-run-voltage:
+        allOf:
+          - $ref: "/schemas/types.yaml#/definitions/uint32"
+          - minimum: 0
+            maximum: 1300000
+        description:
+          PMIC default "RUN" state voltage in uV. See below table for
+          bucks which support this. 0 means disabled.
+
+      rohm,dvs-idle-voltage:
+        allOf:
+          - $ref: "/schemas/types.yaml#/definitions/uint32"
+          - minimum: 0
+            maximum: 1300000
+        description:
+          PMIC default "IDLE" state voltage in uV. See below table for
+          bucks which support this. 0 means disabled.
+
+      rohm,dvs-suspend-voltage:
+        allOf:
+          - $ref: "/schemas/types.yaml#/definitions/uint32"
+          - minimum: 0
+            maximum: 1300000
+        description:
+          PMIC default "SUSPEND" state voltage in uV. See below table for
+          bucks which support this. 0 means disabled.
+
+        # Supported default DVS states:
+        #
+        # BD71847:
+        # buck | dvs-run-voltage | dvs-idle-voltage | dvs-suspend-voltage
+        # ----------------------------------------------------------------
+        # 1    | supported       | supported        | supported
+        # ----------------------------------------------------------------
+        # 2    | supported       | supported        | not supported
+        # ----------------------------------------------------------------
+        # rest | not supported   | not supported    | not supported
+
+    required:
+      - regulator-name
+  additionalProperties: false
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt b/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt
deleted file mode 100644
index 6189df7..0000000
--- a/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-STMicroelectronics STPMIC1 Voltage regulators
-
-Regulator Nodes are optional depending on needs.
-
-Available Regulators in STPMIC1 device are:
-  - buck1 for Buck BUCK1
-  - buck2 for Buck BUCK2
-  - buck3 for Buck BUCK3
-  - buck4 for Buck BUCK4
-  - ldo1 for LDO LDO1
-  - ldo2 for LDO LDO2
-  - ldo3 for LDO LDO3
-  - ldo4 for LDO LDO4
-  - ldo5 for LDO LDO5
-  - ldo6 for LDO LDO6
-  - vref_ddr for LDO Vref DDR
-  - boost for Buck BOOST
-  - pwr_sw1 for VBUS_OTG switch
-  - pwr_sw2 for SW_OUT switch
-
-Switches are fixed voltage regulators with only enable/disable capability.
-
-Optional properties:
-- st,mask-reset: mask reset for this regulator: the regulator configuration
-  is maintained during pmic reset.
-- regulator-over-current-protection:
-    if set, all regulators are switched off in case of over-current detection
-    on this regulator,
-    if not set, the driver only sends an over-current event.
-- interrupts: index of current limit detection interrupt
-- <regulator>-supply: phandle to the parent supply/regulator node
-	each regulator supply can be described except vref_ddr.
-- regulator-active-discharge: can be used on pwr_sw1 and pwr_sw2.
-
-Example:
-regulators {
-	compatible = "st,stpmic1-regulators";
-
-	ldo6-supply = <&v3v3>;
-
-	vdd_core: buck1 {
-		regulator-name = "vdd_core";
-		interrupts = <IT_CURLIM_BUCK1 0>;
-		st,mask-reset;
-		regulator-pull-down;
-		regulator-min-microvolt = <700000>;
-		regulator-max-microvolt = <1200000>;
-	};
-
-	v3v3: buck4 {
-		regulator-name = "v3v3";
-		interrupts = <IT_CURLIM_BUCK4 0>;
-
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	v1v8: ldo6 {
-		regulator-name = "v1v8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-over-current-protection;
-	};
-};
diff --git a/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml
new file mode 100644
index 0000000..084960a
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml
@@ -0,0 +1,324 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/ti,omap-remoteproc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OMAP4+ Remoteproc Devices
+
+maintainers:
+  - Suman Anna <s-anna@ti.com>
+
+description:
+  The OMAP family of SoCs usually have one or more slave processor sub-systems
+  that are used to offload some of the processor-intensive tasks, or to manage
+  other hardware accelerators, for achieving various system level goals.
+
+  The processor cores in the sub-system are usually behind an IOMMU, and may
+  contain additional sub-modules like Internal RAM and/or ROMs, L1 and/or L2
+  caches, an Interrupt Controller, a Cache Controller etc.
+
+  The OMAP SoCs usually have a DSP processor sub-system and/or an IPU processor
+  sub-system. The DSP processor sub-system can contain any of the TI's C64x,
+  C66x or C67x family of DSP cores as the main execution unit. The IPU processor
+  sub-system usually contains either a Dual-Core Cortex-M3 or Dual-Core
+  Cortex-M4 processors.
+
+  Each remote processor sub-system is represented as a single DT node. Each node
+  has a number of required or optional properties that enable the OS running on
+  the host processor (MPU) to perform the device management of the remote
+  processor and to communicate with the remote processor. The various properties
+  can be classified as constant or variable. The constant properties are
+  dictated by the SoC and does not change from one board to another having the
+  same SoC. Examples of constant properties include 'iommus', 'reg'. The
+  variable properties are dictated by the system integration aspects such as
+  memory on the board, or configuration used within the corresponding firmware
+  image. Examples of variable properties include 'mboxes', 'memory-region',
+  'timers', 'watchdog-timers' etc.
+
+properties:
+  compatible:
+    enum:
+      - ti,omap4-dsp
+      - ti,omap5-dsp
+      - ti,dra7-dsp
+      - ti,omap4-ipu
+      - ti,omap5-ipu
+      - ti,dra7-ipu
+
+  iommus:
+    minItems: 1
+    maxItems: 2
+    description: |
+      phandles to OMAP IOMMU nodes, that need to be programmed
+      for this remote processor to access any external RAM memory or
+      other peripheral device address spaces. This property usually
+      has only a single phandle. Multiple phandles are used only in
+      cases where the sub-system has different ports for different
+      sub-modules within the processor sub-system (eg: DRA7 DSPs),
+      and need the same programming in both the MMUs.
+
+  mboxes:
+    minItems: 1
+    maxItems: 2
+    description: |
+      OMAP Mailbox specifier denoting the sub-mailbox, to be used for
+      communication with the remote processor. The specifier format is
+      as per the bindings,
+      Documentation/devicetree/bindings/mailbox/omap-mailbox.txt
+      This property should match with the sub-mailbox node used in
+      the firmware image.
+
+  clocks:
+    description: |
+      Main functional clock for the remote processor
+
+  resets:
+    description: |
+      Reset handles for the remote processor
+
+  firmware-name:
+    description: |
+      Default name of the firmware to load to the remote processor.
+
+# Optional properties:
+# --------------------
+# Some of these properties are mandatory on some SoCs, and some are optional
+# depending on the configuration of the firmware image to be executed on the
+# remote processor. The conditions are mentioned for each property.
+#
+# The following are the optional properties:
+
+  memory-region:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      phandle to the reserved memory node to be associated
+      with the remoteproc device. The reserved memory node
+      can be a CMA memory node, and should be defined as
+      per the bindings,
+      Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
+
+  reg:
+    description: |
+      Address space for any remoteproc memories present on
+      the SoC. Should contain an entry for each value in
+      'reg-names'. These are mandatory for all DSP and IPU
+      processors that have them (OMAP4/OMAP5 DSPs do not have
+      any RAMs)
+
+  reg-names:
+    description: |
+      Required names for each of the address spaces defined in
+      the 'reg' property. Expects the names from the following
+      list, in the specified order, each representing the corresponding
+      internal RAM memory region.
+    minItems: 1
+    maxItems: 3
+    items:
+      - const: l2ram
+      - const: l1pram
+      - const: l1dram
+
+  ti,bootreg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: |
+      Should be a triple of the phandle to the System Control
+      Configuration region that contains the boot address
+      register, the register offset of the boot address
+      register within the System Control module, and the bit
+      shift within the register. This property is required for
+      all the DSP instances on OMAP4, OMAP5 and DRA7xx SoCs.
+
+  ti,autosuspend-delay-ms:
+    description: |
+      Custom autosuspend delay for the remoteproc in milliseconds.
+      Recommended values is preferable to be in the order of couple
+      of seconds. A negative value can also be used to disable the
+      autosuspend behavior.
+
+  ti,timers:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: |
+      One or more phandles to OMAP DMTimer nodes, that serve
+      as System/Tick timers for the OS running on the remote
+      processors. This will usually be a single timer if the
+      processor sub-system is running in SMP mode, or one per
+      core in the processor sub-system. This can also be used
+      to reserve specific timers to be dedicated to the
+      remote processors.
+
+      This property is mandatory on remote processors requiring
+      external tick wakeup, and to support Power Management
+      features. The timers to be used should match with the
+      timers used in the firmware image.
+
+  ti,watchdog-timers:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: |
+      One or more phandles to OMAP DMTimer nodes, used to
+      serve as Watchdog timers for the processor cores. This
+      will usually be one per executing processor core, even
+      if the processor sub-system is running a SMP OS.
+
+      The timers to be used should match with the watchdog
+      timers used in the firmware image.
+
+if:
+  properties:
+    compatible:
+      enum:
+        - ti,dra7-dsp
+then:
+  properties:
+    reg:
+      minItems: 3
+      maxItems: 3
+  required:
+    - reg
+    - reg-names
+    - ti,bootreg
+
+else:
+  if:
+    properties:
+      compatible:
+        enum:
+          - ti,omap4-ipu
+          - ti,omap5-ipu
+          - ti,dra7-ipu
+  then:
+    properties:
+      reg:
+        minItems: 1
+        maxItems: 1
+      ti,bootreg: false
+    required:
+      - reg
+      - reg-names
+
+  else:
+    properties:
+      reg: false
+    required:
+      - ti,bootreg
+
+required:
+  - compatible
+  - iommus
+  - mboxes
+  - clocks
+  - resets
+  - firmware-name
+
+additionalProperties: false
+
+examples:
+  - |
+
+    //Example 1: OMAP4 DSP
+
+    /* DSP Reserved Memory node */
+    #include <dt-bindings/clock/omap4.h>
+    reserved-memory {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        dsp_memory_region: dsp-memory@98000000 {
+            compatible = "shared-dma-pool";
+            reg = <0x98000000 0x800000>;
+            reusable;
+        };
+    };
+
+    /* DSP node */
+    ocp {
+        dsp: dsp {
+            compatible = "ti,omap4-dsp";
+            ti,bootreg = <&scm_conf 0x304 0>;
+            iommus = <&mmu_dsp>;
+            mboxes = <&mailbox &mbox_dsp>;
+            memory-region = <&dsp_memory_region>;
+            ti,timers = <&timer5>;
+            ti,watchdog-timers = <&timer6>;
+            clocks = <&tesla_clkctrl OMAP4_DSP_CLKCTRL 0>;
+            resets = <&prm_tesla 0>, <&prm_tesla 1>;
+            firmware-name = "omap4-dsp-fw.xe64T";
+        };
+    };
+
+  - |+
+
+    //Example 2: OMAP5 IPU
+
+    /* IPU Reserved Memory node */
+    #include <dt-bindings/clock/omap5.h>
+    reserved-memory {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ipu_memory_region: ipu-memory@95800000 {
+            compatible = "shared-dma-pool";
+            reg = <0 0x95800000 0 0x3800000>;
+            reusable;
+        };
+    };
+
+    /* IPU node */
+    ocp {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        ipu: ipu@55020000 {
+            compatible = "ti,omap5-ipu";
+            reg = <0x55020000 0x10000>;
+            reg-names = "l2ram";
+            iommus = <&mmu_ipu>;
+            mboxes = <&mailbox &mbox_ipu>;
+            memory-region = <&ipu_memory_region>;
+            ti,timers = <&timer3>, <&timer4>;
+            ti,watchdog-timers = <&timer9>, <&timer11>;
+            clocks = <&ipu_clkctrl OMAP5_MMU_IPU_CLKCTRL 0>;
+            resets = <&prm_core 2>;
+            firmware-name = "omap5-ipu-fw.xem4";
+        };
+    };
+
+  - |+
+
+    //Example 3: DRA7xx/AM57xx DSP
+
+    /* DSP1 Reserved Memory node */
+    #include <dt-bindings/clock/dra7.h>
+    reserved-memory {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        dsp1_memory_region: dsp1-memory@99000000 {
+            compatible = "shared-dma-pool";
+            reg = <0x0 0x99000000 0x0 0x4000000>;
+            reusable;
+        };
+    };
+
+    /* DSP1 node */
+    ocp {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        dsp1: dsp@40800000 {
+            compatible = "ti,dra7-dsp";
+            reg = <0x40800000 0x48000>,
+                  <0x40e00000 0x8000>,
+                  <0x40f00000 0x8000>;
+            reg-names = "l2ram", "l1pram", "l1dram";
+            ti,bootreg = <&scm_conf 0x55c 0>;
+            iommus = <&mmu0_dsp1>, <&mmu1_dsp1>;
+            mboxes = <&mailbox5 &mbox_dsp1_ipc3x>;
+            memory-region = <&dsp1_memory_region>;
+            ti,timers = <&timer5>;
+            ti,watchdog-timers = <&timer10>;
+            resets = <&prm_dsp1 0>;
+            clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>;
+            firmware-name = "dra7-dsp1-fw.xe66";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
index b3f57d8..92922d3 100644
--- a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
+++ b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
@@ -29,6 +29,8 @@
   - reg
   - "#reset-cells"
 
+additionalProperties: false
+
 examples:
   - |
     reset-controller@c884404 {
diff --git a/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml b/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml
index 411bd76..512a33bd 100644
--- a/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml
+++ b/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml
@@ -28,6 +28,8 @@
   - reg
   - "#reset-cells"
 
+additionalProperties: false
+
 examples:
   - |
     reset-controller@8b2c800 {
diff --git a/Documentation/devicetree/bindings/reset/renesas,rst.txt b/Documentation/devicetree/bindings/reset/renesas,rst.txt
deleted file mode 100644
index de7f06c..0000000
--- a/Documentation/devicetree/bindings/reset/renesas,rst.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-DT bindings for the Renesas R-Car and RZ/G Reset Controllers
-
-The R-Car and RZ/G Reset Controllers provide reset control, and implement the
-following functions:
-  - Latching of the levels on mode pins when PRESET# is negated,
-  - Mode monitoring register,
-  - Reset control of peripheral devices (on R-Car Gen1),
-  - Watchdog timer (on R-Car Gen1),
-  - Register-based reset control and boot address registers for the various CPU
-    cores (on R-Car Gen2 and Gen3, and on RZ/G).
-
-
-Required properties:
-  - compatible: Should be
-		  - "renesas,<soctype>-reset-wdt" for R-Car Gen1,
-		  - "renesas,<soctype>-rst" for R-Car Gen2 and Gen3, and RZ/G
-		Examples with soctypes are:
-		  - "renesas,r8a7743-rst" (RZ/G1M)
-		  - "renesas,r8a7744-rst" (RZ/G1N)
-		  - "renesas,r8a7745-rst" (RZ/G1E)
-		  - "renesas,r8a77470-rst" (RZ/G1C)
-		  - "renesas,r8a774a1-rst" (RZ/G2M)
-		  - "renesas,r8a774b1-rst" (RZ/G2N)
-		  - "renesas,r8a774c0-rst" (RZ/G2E)
-		  - "renesas,r8a7778-reset-wdt" (R-Car M1A)
-		  - "renesas,r8a7779-reset-wdt" (R-Car H1)
-		  - "renesas,r8a7790-rst" (R-Car H2)
-		  - "renesas,r8a7791-rst" (R-Car M2-W)
-		  - "renesas,r8a7792-rst" (R-Car V2H
-		  - "renesas,r8a7793-rst" (R-Car M2-N)
-		  - "renesas,r8a7794-rst" (R-Car E2)
-		  - "renesas,r8a7795-rst" (R-Car H3)
-		  - "renesas,r8a7796-rst" (R-Car M3-W)
-		  - "renesas,r8a77961-rst" (R-Car M3-W+)
-		  - "renesas,r8a77965-rst" (R-Car M3-N)
-		  - "renesas,r8a77970-rst" (R-Car V3M)
-		  - "renesas,r8a77980-rst" (R-Car V3H)
-		  - "renesas,r8a77990-rst" (R-Car E3)
-		  - "renesas,r8a77995-rst" (R-Car D3)
-  - reg: Address start and address range for the device.
-
-
-Example:
-
-	rst: reset-controller@e6160000 {
-		compatible = "renesas,r8a7795-rst";
-		reg = <0 0xe6160000 0 0x0200>;
-	};
diff --git a/Documentation/devicetree/bindings/reset/renesas,rst.yaml b/Documentation/devicetree/bindings/reset/renesas,rst.yaml
new file mode 100644
index 0000000..b5de1d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/renesas,rst.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/reset/renesas,rst.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas R-Car and RZ/G Reset Controller
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+  - Magnus Damm <magnus.damm@gmail.com>
+
+description: |
+  The R-Car and RZ/G Reset Controllers provide reset control, and implement the
+  following functions:
+    - Latching of the levels on mode pins when PRESET# is negated,
+    - Mode monitoring register,
+    - Reset control of peripheral devices (on R-Car Gen1),
+    - Watchdog timer (on R-Car Gen1),
+    - Register-based reset control and boot address registers for the various
+      CPU cores (on R-Car Gen2 and Gen3, and on RZ/G).
+
+properties:
+  compatible:
+    enum:
+      - renesas,r8a7743-rst       # RZ/G1M
+      - renesas,r8a7744-rst       # RZ/G1N
+      - renesas,r8a7745-rst       # RZ/G1E
+      - renesas,r8a77470-rst      # RZ/G1C
+      - renesas,r8a774a1-rst      # RZ/G2M
+      - renesas,r8a774b1-rst      # RZ/G2N
+      - renesas,r8a774c0-rst      # RZ/G2E
+      - renesas,r8a7778-reset-wdt # R-Car M1A
+      - renesas,r8a7779-reset-wdt # R-Car H1
+      - renesas,r8a7790-rst       # R-Car H2
+      - renesas,r8a7791-rst       # R-Car M2-W
+      - renesas,r8a7792-rst       # R-Car V2H
+      - renesas,r8a7793-rst       # R-Car M2-N
+      - renesas,r8a7794-rst       # R-Car E2
+      - renesas,r8a7795-rst       # R-Car H3
+      - renesas,r8a7796-rst       # R-Car M3-W
+      - renesas,r8a77961-rst      # R-Car M3-W+
+      - renesas,r8a77965-rst      # R-Car M3-N
+      - renesas,r8a77970-rst      # R-Car V3M
+      - renesas,r8a77980-rst      # R-Car V3H
+      - renesas,r8a77990-rst      # R-Car E3
+      - renesas,r8a77995-rst      # R-Car D3
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    rst: reset-controller@e6160000 {
+            compatible = "renesas,r8a7795-rst";
+            reg = <0xe6160000 0x0200>;
+    };
diff --git a/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml b/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml
index a9ff3cb..444be32 100644
--- a/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml
+++ b/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml
@@ -29,6 +29,8 @@
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     rng@c8834000 {
diff --git a/Documentation/devicetree/bindings/rng/brcm,bcm2835.txt b/Documentation/devicetree/bindings/rng/brcm,bcm2835.txt
deleted file mode 100644
index aaac797..0000000
--- a/Documentation/devicetree/bindings/rng/brcm,bcm2835.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-BCM2835/6368 Random number generator
-
-Required properties:
-
-- compatible : should be one of
-	"brcm,bcm2835-rng"
-	"brcm,bcm-nsp-rng"
-	"brcm,bcm5301x-rng" or
-	"brcm,bcm6368-rng"
-- reg : Specifies base physical address and size of the registers.
-
-Optional properties:
-
-- clocks : phandle to clock-controller plus clock-specifier pair
-- clock-names : "ipsec" as a clock name
-
-Optional properties:
-
-- interrupts: specify the interrupt for the RNG block
-
-Example:
-
-rng {
-	compatible = "brcm,bcm2835-rng";
-	reg = <0x7e104000 0x10>;
-	interrupts = <2 29>;
-};
-
-rng@18033000 {
-	compatible = "brcm,bcm-nsp-rng";
-	reg = <0x18033000 0x14>;
-};
-
-random: rng@10004180 {
-	compatible = "brcm,bcm6368-rng";
-	reg = <0x10004180 0x14>;
-
-	clocks = <&periph_clk 18>;
-	clock-names = "ipsec";
-};
diff --git a/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml b/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml
new file mode 100644
index 0000000..c147900
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/brcm,bcm2835.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BCM2835/6368 Random number generator
+
+maintainers:
+  - Stefan Wahren <stefan.wahren@i2se.com>
+  - Florian Fainelli <f.fainelli@gmail.com>
+  - Herbert Xu <herbert@gondor.apana.org.au>
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm2835-rng
+      - brcm,bcm-nsp-rng
+      - brcm,bcm5301x-rng
+      - brcm,bcm6368-rng
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: ipsec
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    rng@7e104000 {
+        compatible = "brcm,bcm2835-rng";
+        reg = <0x7e104000 0x10>;
+        interrupts = <2 29>;
+    };
+
+  - |
+    rng@18033000 {
+        compatible = "brcm,bcm-nsp-rng";
+        reg = <0x18033000 0x14>;
+    };
+
+  - |
+    rng@10004180 {
+        compatible = "brcm,bcm6368-rng";
+        reg = <0x10004180 0x14>;
+
+        clocks = <&periph_clk 18>;
+        clock-names = "ipsec";
+    };
diff --git a/Documentation/devicetree/bindings/rtc/ingenic,jz4740-rtc.txt b/Documentation/devicetree/bindings/rtc/ingenic,jz4740-rtc.txt
deleted file mode 100644
index 41c7ae1..0000000
--- a/Documentation/devicetree/bindings/rtc/ingenic,jz4740-rtc.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-JZ4740 and similar SoCs real-time clock driver
-
-Required properties:
-
-- compatible: One of:
-  - "ingenic,jz4740-rtc" - for use with the JZ4740 SoC
-  - "ingenic,jz4780-rtc" - for use with the JZ4780 SoC
-- reg: Address range of rtc register set
-- interrupts: IRQ number for the alarm interrupt
-- clocks: phandle to the "rtc" clock
-- clock-names: must be "rtc"
-
-Optional properties:
-- system-power-controller: To use this component as the
-  system power controller
-- reset-pin-assert-time-ms: Reset pin low-level assertion
-  time after wakeup (default 60ms; range 0-125ms if RTC clock
-  at 32 kHz)
-- min-wakeup-pin-assert-time-ms: Minimum wakeup pin assertion
-  time (default 100ms; range 0-2s if RTC clock at 32 kHz)
-
-Example:
-
-rtc@10003000 {
-	compatible = "ingenic,jz4740-rtc";
-	reg = <0x10003000 0x40>;
-
-	interrupt-parent = <&intc>;
-	interrupts = <32>;
-
-	clocks = <&rtc_clock>;
-	clock-names = "rtc";
-
-	system-power-controller;
-	reset-pin-assert-time-ms = <60>;
-	min-wakeup-pin-assert-time-ms = <100>;
-};
diff --git a/Documentation/devicetree/bindings/rtc/ingenic,rtc.yaml b/Documentation/devicetree/bindings/rtc/ingenic,rtc.yaml
new file mode 100644
index 0000000..4206bf8
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/ingenic,rtc.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/ingenic,rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs Real-Time Clock DT bindings
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+        - ingenic,jz4740-rtc
+        - ingenic,jz4760-rtc
+      - items:
+        - const: ingenic,jz4725b-rtc
+        - const: ingenic,jz4740-rtc
+      - items:
+        - enum:
+          - ingenic,jz4770-rtc
+          - ingenic,jz4780-rtc
+        - const: ingenic,jz4760-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: rtc
+
+  system-power-controller:
+    description: |
+      Indicates that the RTC is responsible for powering OFF
+      the system.
+    type: boolean
+
+  ingenic,reset-pin-assert-time-ms:
+    minimum: 0
+    maximum: 125
+    default: 60
+    description: |
+      Reset pin low-level assertion time after wakeup
+      (assuming RTC clock at 32 kHz)
+
+  ingenic,min-wakeup-pin-assert-time-ms:
+    minimum: 0
+    maximum: 2000
+    default: 100
+    description: |
+      Minimum wakeup pin assertion time
+      (assuming RTC clock at 32 kHz)
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/jz4740-cgu.h>
+    rtc_dev: rtc@10003000 {
+      compatible = "ingenic,jz4740-rtc";
+      reg = <0x10003000 0x40>;
+
+      interrupt-parent = <&intc>;
+      interrupts = <15>;
+
+      clocks = <&cgu JZ4740_CLK_RTC>;
+      clock-names = "rtc";
+    };
diff --git a/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml b/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml
index dcff573..b95cb01 100644
--- a/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml
@@ -51,6 +51,8 @@
   - clocks
   - clock-names
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/r7s72100-clock.h>
diff --git a/Documentation/devicetree/bindings/rtc/rtc-mt2712.txt b/Documentation/devicetree/bindings/rtc/rtc-mt2712.txt
new file mode 100644
index 0000000..c33d87e
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-mt2712.txt
@@ -0,0 +1,14 @@
+Device-Tree bindings for MediaTek SoC based RTC
+
+Required properties:
+- compatible	    : Should be "mediatek,mt2712-rtc" : for MT2712 SoC
+- reg 		    : Specifies base physical address and size of the registers;
+- interrupts	    : Should contain the interrupt for RTC alarm;
+
+Example:
+
+rtc: rtc@10011000 {
+	compatible = "mediatek,mt2712-rtc";
+	reg = <0 0x10011000 0 0x1000>;
+	interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_LOW>;
+};
diff --git a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml
index 0a54296..48c6caf 100644
--- a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml
@@ -111,6 +111,8 @@
   - clocks
   - interrupts
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/mfd/stm32f4-rcc.h>
diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
index 214fe8b..d4178ab 100644
--- a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
@@ -62,6 +62,8 @@
   - clocks
   - clock-names
 
+additionalProperties: false
+
 examples:
   - |
     serial@84c0 {
diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt
index c8d677f..9582fc2 100644
--- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt
+++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt
@@ -19,7 +19,7 @@
   the transceiver is actually CTS_B, not RTS_B. CTS_B is always output,
   and RTS_B is input, regardless of dte-mode.
 
-Please check Documentation/devicetree/bindings/serial/serial.txt
+Please check Documentation/devicetree/bindings/serial/serial.yaml
 for the complete list of generic properties.
 
 Note: Each uart controller should have an alias correctly numbered
diff --git a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml
new file mode 100644
index 0000000..9110152
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/serial/renesas,hscif.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas High Speed Serial Communication Interface with FIFO (HSCIF)
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+allOf:
+  - $ref: serial.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,hscif-r8a7778      # R-Car M1
+              - renesas,hscif-r8a7779      # R-Car H1
+          - const: renesas,rcar-gen1-hscif # R-Car Gen1
+          - const: renesas,hscif           # generic HSCIF compatible UART
+
+      - items:
+          - enum:
+              - renesas,hscif-r8a7743      # RZ/G1M
+              - renesas,hscif-r8a7744      # RZ/G1N
+              - renesas,hscif-r8a7745      # RZ/G1E
+              - renesas,hscif-r8a77470     # RZ/G1C
+              - renesas,hscif-r8a7790      # R-Car H2
+              - renesas,hscif-r8a7791      # R-Car M2-W
+              - renesas,hscif-r8a7792      # R-Car V2H
+              - renesas,hscif-r8a7793      # R-Car M2-N
+              - renesas,hscif-r8a7794      # R-Car E2
+          - const: renesas,rcar-gen2-hscif # R-Car Gen2 and RZ/G1
+          - const: renesas,hscif           # generic HSCIF compatible UART
+
+      - items:
+          - enum:
+              - renesas,hscif-r8a774a1     # RZ/G2M
+              - renesas,hscif-r8a774b1     # RZ/G2N
+              - renesas,hscif-r8a774c0     # RZ/G2E
+              - renesas,hscif-r8a7795      # R-Car H3
+              - renesas,hscif-r8a7796      # R-Car M3-W
+              - renesas,hscif-r8a77961     # R-Car M3-W+
+              - renesas,hscif-r8a77965     # R-Car M3-N
+              - renesas,hscif-r8a77970     # R-Car V3M
+              - renesas,hscif-r8a77980     # R-Car V3H
+              - renesas,hscif-r8a77990     # R-Car E3
+              - renesas,hscif-r8a77995     # R-Car D3
+          - const: renesas,rcar-gen3-hscif # R-Car Gen3 and RZ/G2
+          - const: renesas,hscif           # generic HSCIF compatible UART
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+    items:
+      enum:
+        - fck # UART functional clock
+        - hsck # optional external clock input
+        - brg_int # optional internal clock source for BRG frequency divider
+        - scif_clk # optional external clock source for BRG frequency divider
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    description:
+      Must contain a list of pairs of references to DMA specifiers, one for
+      transmission, and one for reception.
+
+  dma-names:
+    minItems: 2
+    maxItems: 4
+    items:
+      enum:
+        - tx
+        - rx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,rcar-gen2-hscif
+          - renesas,rcar-gen3-hscif
+then:
+  required:
+    - resets
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+    aliases {
+            serial1 = &hscif1;
+    };
+
+    hscif1: serial@e6550000 {
+            compatible = "renesas,hscif-r8a7795", "renesas,rcar-gen3-hscif",
+                         "renesas,hscif";
+            reg = <0xe6550000 96>;
+            interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 519>, <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+                     <&scif_clk>;
+            clock-names = "fck", "brg_int", "scif_clk";
+            dmas = <&dmac1 0x33>, <&dmac1 0x32>, <&dmac2 0x33>, <&dmac2 0x32>;
+            dma-names = "tx", "rx", "tx", "rx";
+            power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+            resets = <&cpg 519>;
+            uart-has-rtscts;
+    };
diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
deleted file mode 100644
index a5edf4b..0000000
--- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
+++ /dev/null
@@ -1,150 +0,0 @@
-* Renesas SH-Mobile Serial Communication Interface
-
-Required properties:
-
-  - compatible: Must contain one or more of the following:
-
-    - "renesas,scif-r7s72100" for R7S72100 (RZ/A1H) SCIF compatible UART.
-    - "renesas,scif-r7s9210" for R7S9210 (RZ/A2) SCIF compatible UART.
-    - "renesas,scifa-r8a73a4" for R8A73A4 (R-Mobile APE6) SCIFA compatible UART.
-    - "renesas,scifb-r8a73a4" for R8A73A4 (R-Mobile APE6) SCIFB compatible UART.
-    - "renesas,scifa-r8a7740" for R8A7740 (R-Mobile A1) SCIFA compatible UART.
-    - "renesas,scifb-r8a7740" for R8A7740 (R-Mobile A1) SCIFB compatible UART.
-    - "renesas,scif-r8a7743" for R8A7743 (RZ/G1M) SCIF compatible UART.
-    - "renesas,scifa-r8a7743" for R8A7743 (RZ/G1M) SCIFA compatible UART.
-    - "renesas,scifb-r8a7743" for R8A7743 (RZ/G1M) SCIFB compatible UART.
-    - "renesas,hscif-r8a7743" for R8A7743 (RZ/G1M) HSCIF compatible UART.
-    - "renesas,scif-r8a7744" for R8A7744 (RZ/G1N) SCIF compatible UART.
-    - "renesas,scifa-r8a7744" for R8A7744 (RZ/G1N) SCIFA compatible UART.
-    - "renesas,scifb-r8a7744" for R8A7744 (RZ/G1N) SCIFB compatible UART.
-    - "renesas,hscif-r8a7744" for R8A7744 (RZ/G1N) HSCIF compatible UART.
-    - "renesas,scif-r8a7745" for R8A7745 (RZ/G1E) SCIF compatible UART.
-    - "renesas,scifa-r8a7745" for R8A7745 (RZ/G1E) SCIFA compatible UART.
-    - "renesas,scifb-r8a7745" for R8A7745 (RZ/G1E) SCIFB compatible UART.
-    - "renesas,hscif-r8a7745" for R8A7745 (RZ/G1E) HSCIF compatible UART.
-    - "renesas,scif-r8a77470" for R8A77470 (RZ/G1C) SCIF compatible UART.
-    - "renesas,hscif-r8a77470" for R8A77470 (RZ/G1C) HSCIF compatible UART.
-    - "renesas,scif-r8a774a1" for R8A774A1 (RZ/G2M) SCIF compatible UART.
-    - "renesas,hscif-r8a774a1" for R8A774A1 (RZ/G2M) HSCIF compatible UART.
-    - "renesas,scif-r8a774b1" for R8A774B1 (RZ/G2N) SCIF compatible UART.
-    - "renesas,hscif-r8a774b1" for R8A774B1 (RZ/G2N) HSCIF compatible UART.
-    - "renesas,scif-r8a774c0" for R8A774C0 (RZ/G2E) SCIF compatible UART.
-    - "renesas,hscif-r8a774c0" for R8A774C0 (RZ/G2E) HSCIF compatible UART.
-    - "renesas,scif-r8a7778" for R8A7778 (R-Car M1) SCIF compatible UART.
-    - "renesas,hscif-r8a7778" for R8A7778 (R-Car M1) HSCIF compatible UART.
-    - "renesas,scif-r8a7779" for R8A7779 (R-Car H1) SCIF compatible UART.
-    - "renesas,hscif-r8a7779" for R8A7779 (R-Car H1) HSCIF compatible UART.
-    - "renesas,scif-r8a7790" for R8A7790 (R-Car H2) SCIF compatible UART.
-    - "renesas,scifa-r8a7790" for R8A7790 (R-Car H2) SCIFA compatible UART.
-    - "renesas,scifb-r8a7790" for R8A7790 (R-Car H2) SCIFB compatible UART.
-    - "renesas,hscif-r8a7790" for R8A7790 (R-Car H2) HSCIF compatible UART.
-    - "renesas,scif-r8a7791" for R8A7791 (R-Car M2-W) SCIF compatible UART.
-    - "renesas,scifa-r8a7791" for R8A7791 (R-Car M2-W) SCIFA compatible UART.
-    - "renesas,scifb-r8a7791" for R8A7791 (R-Car M2-W) SCIFB compatible UART.
-    - "renesas,hscif-r8a7791" for R8A7791 (R-Car M2-W) HSCIF compatible UART.
-    - "renesas,scif-r8a7792" for R8A7792 (R-Car V2H) SCIF compatible UART.
-    - "renesas,hscif-r8a7792" for R8A7792 (R-Car V2H) HSCIF compatible UART.
-    - "renesas,scif-r8a7793" for R8A7793 (R-Car M2-N) SCIF compatible UART.
-    - "renesas,scifa-r8a7793" for R8A7793 (R-Car M2-N) SCIFA compatible UART.
-    - "renesas,scifb-r8a7793" for R8A7793 (R-Car M2-N) SCIFB compatible UART.
-    - "renesas,hscif-r8a7793" for R8A7793 (R-Car M2-N) HSCIF compatible UART.
-    - "renesas,scif-r8a7794" for R8A7794 (R-Car E2) SCIF compatible UART.
-    - "renesas,scifa-r8a7794" for R8A7794 (R-Car E2) SCIFA compatible UART.
-    - "renesas,scifb-r8a7794" for R8A7794 (R-Car E2) SCIFB compatible UART.
-    - "renesas,hscif-r8a7794" for R8A7794 (R-Car E2) HSCIF compatible UART.
-    - "renesas,scif-r8a7795" for R8A7795 (R-Car H3) SCIF compatible UART.
-    - "renesas,hscif-r8a7795" for R8A7795 (R-Car H3) HSCIF compatible UART.
-    - "renesas,scif-r8a7796" for R8A77960 (R-Car M3-W) SCIF compatible UART.
-    - "renesas,hscif-r8a7796" for R8A77960 (R-Car M3-W) HSCIF compatible UART.
-    - "renesas,scif-r8a77961" for R8A77961 (R-Car M3-W+) SCIF compatible UART.
-    - "renesas,hscif-r8a77961" for R8A77961 (R-Car M3-W+) HSCIF compatible UART.
-    - "renesas,scif-r8a77965" for R8A77965 (R-Car M3-N) SCIF compatible UART.
-    - "renesas,hscif-r8a77965" for R8A77965 (R-Car M3-N) HSCIF compatible UART.
-    - "renesas,scif-r8a77970" for R8A77970 (R-Car V3M) SCIF compatible UART.
-    - "renesas,hscif-r8a77970" for R8A77970 (R-Car V3M) HSCIF compatible UART.
-    - "renesas,scif-r8a77980" for R8A77980 (R-Car V3H) SCIF compatible UART.
-    - "renesas,hscif-r8a77980" for R8A77980 (R-Car V3H) HSCIF compatible UART.
-    - "renesas,scif-r8a77990" for R8A77990 (R-Car E3) SCIF compatible UART.
-    - "renesas,hscif-r8a77990" for R8A77990 (R-Car E3) HSCIF compatible UART.
-    - "renesas,scif-r8a77995" for R8A77995 (R-Car D3) SCIF compatible UART.
-    - "renesas,hscif-r8a77995" for R8A77995 (R-Car D3) HSCIF compatible UART.
-    - "renesas,scifa-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFA compatible UART.
-    - "renesas,scifb-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFB compatible UART.
-    - "renesas,rcar-gen1-scif" for R-Car Gen1 SCIF compatible UART,
-    - "renesas,rcar-gen2-scif" for R-Car Gen2 and RZ/G1 SCIF compatible UART,
-    - "renesas,rcar-gen3-scif" for R-Car Gen3 and RZ/G2 SCIF compatible UART,
-    - "renesas,rcar-gen2-scifa" for R-Car Gen2 and RZ/G1 SCIFA compatible UART,
-    - "renesas,rcar-gen2-scifb" for R-Car Gen2 and RZ/G1 SCIFB compatible UART,
-    - "renesas,rcar-gen1-hscif" for R-Car Gen1 HSCIF compatible UART,
-    - "renesas,rcar-gen2-hscif" for R-Car Gen2 and RZ/G1 HSCIF compatible UART,
-    - "renesas,rcar-gen3-hscif" for R-Car Gen3 and RZ/G2 HSCIF compatible UART,
-    - "renesas,scif" for generic SCIF compatible UART.
-    - "renesas,scifa" for generic SCIFA compatible UART.
-    - "renesas,scifb" for generic SCIFB compatible UART.
-    - "renesas,hscif" for generic HSCIF compatible UART.
-    - "renesas,sci" for generic SCI compatible UART.
-
-    When compatible with the generic version, nodes must list the
-    SoC-specific version corresponding to the platform first, followed by the
-    family-specific and/or generic versions.
-
-  - reg: Base address and length of the I/O registers used by the UART.
-  - interrupts: Must contain one or more interrupt-specifiers for the SCIx.
-                If a single interrupt is expressed, then all events are
-                multiplexed into this single interrupt.
-
-                If multiple interrupts are provided by the hardware, the order
-                in which the interrupts are listed must match order below. Note
-                that some HW interrupt events may be muxed together resulting
-                in duplicate entries.
-                The interrupt order is as follows:
-                  1. Error (ERI)
-                  2. Receive buffer full (RXI)
-                  3. Transmit buffer empty (TXI)
-                  4. Break (BRI)
-                  5. Data Ready (DRI)
-                  6. Transmit End (TEI)
-
-  - clocks: Must contain a phandle and clock-specifier pair for each entry
-    in clock-names.
-  - clock-names: Must contain "fck" for the SCIx UART functional clock.
-    Apart from the divided functional clock, there may be other possible
-    sources for the sampling clock, depending on SCIx variant.
-    On (H)SCI(F) and some SCIFA, an additional clock may be specified:
-      - "hsck" for the optional external clock input (on HSCIF),
-      - "sck" for the optional external clock input (on other variants).
-    On UARTs equipped with a Baud Rate Generator for External Clock (BRG)
-    (some SCIF and HSCIF), additional clocks may be specified:
-      - "brg_int" for the optional internal clock source for the frequency
-	divider (typically the (AXI or SHwy) bus clock),
-      - "scif_clk" for the optional external clock source for the frequency
-	divider (SCIF_CLK).
-
-Note: Each enabled SCIx UART may have an optional "serialN" alias in the
-"aliases" node.
-
-Optional properties:
-  - dmas: Must contain a list of two references to DMA specifiers, one for
-	  transmission, and one for reception.
-  - dma-names: Must contain a list of two DMA names, "tx" and "rx".
-  - {cts,dsr,dcd,rng,rts,dtr}-gpios: Specify GPIOs for modem lines, cfr. the
-    generic serial DT bindings in serial.txt.
-  - uart-has-rtscts: Indicates dedicated lines for RTS/CTS hardware flow
-    control, cfr. the generic serial DT bindings in serial.txt.
-
-Example:
-	aliases {
-		serial0 = &scifa0;
-	};
-
-	scifa0: serial@e6c40000 {
-		compatible = "renesas,scifa-r8a7790",
-			     "renesas,rcar-gen2-scifa", "renesas,scifa";
-		reg = <0 0xe6c40000 0 64>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>;
-		clock-names = "fck";
-		dmas = <&dmac0 0x21>, <&dmac0 0x22>;
-		dma-names = "tx", "rx";
-	};
diff --git a/Documentation/devicetree/bindings/serial/renesas,sci.yaml b/Documentation/devicetree/bindings/serial/renesas,sci.yaml
new file mode 100644
index 0000000..4183b73
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/renesas,sci.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/serial/renesas,sci.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas Serial Communication Interface
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+allOf:
+  - $ref: serial.yaml#
+
+properties:
+  compatible:
+    const: renesas,sci
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Error interrupt
+      - description: Receive buffer full interrupt
+      - description: Transmit buffer empty interrupt
+      - description: Transmit end interrupt
+
+  interrupt-names:
+    items:
+      - const: eri
+      - const: rxi
+      - const: txi
+      - const: tei
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - fck # UART functional clock
+        - sck # optional external clock input
+
+  uart-has-rtscts: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+examples:
+  - |
+    aliases {
+            serial0 = &sci0;
+    };
+
+    sci0: serial@ffff78 {
+            compatible = "renesas,sci";
+            reg = <0xffff78 8>;
+            interrupts = <88 0>, <89 0>, <90 0>, <91 0>;
+            clocks = <&fclk>;
+            clock-names = "fck";
+    };
diff --git a/Documentation/devicetree/bindings/serial/renesas,scif.yaml b/Documentation/devicetree/bindings/serial/renesas,scif.yaml
new file mode 100644
index 0000000..70392b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/renesas,scif.yaml
@@ -0,0 +1,172 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/serial/renesas,scif.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas Serial Communication Interface with FIFO (SCIF)
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+allOf:
+  - $ref: serial.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,scif-r7s72100     # RZ/A1H
+          - const: renesas,scif           # generic SCIF compatible UART
+
+      - items:
+          - enum:
+              - renesas,scif-r7s9210      # RZ/A2
+
+      - items:
+          - enum:
+              - renesas,scif-r8a7778      # R-Car M1
+              - renesas,scif-r8a7779      # R-Car H1
+          - const: renesas,rcar-gen1-scif # R-Car Gen1
+          - const: renesas,scif           # generic SCIF compatible UART
+
+      - items:
+          - enum:
+              - renesas,scif-r8a7743      # RZ/G1M
+              - renesas,scif-r8a7744      # RZ/G1N
+              - renesas,scif-r8a7745      # RZ/G1E
+              - renesas,scif-r8a77470     # RZ/G1C
+              - renesas,scif-r8a7790      # R-Car H2
+              - renesas,scif-r8a7791      # R-Car M2-W
+              - renesas,scif-r8a7792      # R-Car V2H
+              - renesas,scif-r8a7793      # R-Car M2-N
+              - renesas,scif-r8a7794      # R-Car E2
+          - const: renesas,rcar-gen2-scif # R-Car Gen2 and RZ/G1
+          - const: renesas,scif           # generic SCIF compatible UART
+
+      - items:
+          - enum:
+              - renesas,scif-r8a774a1     # RZ/G2M
+              - renesas,scif-r8a774b1     # RZ/G2N
+              - renesas,scif-r8a774c0     # RZ/G2E
+              - renesas,scif-r8a7795      # R-Car H3
+              - renesas,scif-r8a7796      # R-Car M3-W
+              - renesas,scif-r8a77961     # R-Car M3-W+
+              - renesas,scif-r8a77965     # R-Car M3-N
+              - renesas,scif-r8a77970     # R-Car V3M
+              - renesas,scif-r8a77980     # R-Car V3H
+              - renesas,scif-r8a77990     # R-Car E3
+              - renesas,scif-r8a77995     # R-Car D3
+          - const: renesas,rcar-gen3-scif # R-Car Gen3 and RZ/G2
+          - const: renesas,scif           # generic SCIF compatible UART
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    oneOf:
+      - items:
+          - description: A combined interrupt
+      - items:
+          - description: Error interrupt
+          - description: Receive buffer full interrupt
+          - description: Transmit buffer empty interrupt
+          - description: Transmit End interrupt
+      - items:
+          - description: Error interrupt
+          - description: Receive buffer full interrupt
+          - description: Transmit buffer empty interrupt
+          - description: Break interrupt
+          - description: Data Ready interrupt
+          - description: Transmit End interrupt
+
+  interrupt-names:
+    oneOf:
+      - items:
+          - const: eri
+          - const: rxi
+          - const: txi
+          - const: tei
+      - items:
+          - const: eri
+          - const: rxi
+          - const: txi
+          - const: bri
+          - const: dri
+          - const: tei
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+    items:
+      enum:
+        - fck # UART functional clock
+        - sck # optional external clock input
+        - brg_int # optional internal clock source for BRG frequency divider
+        - scif_clk # optional external clock source for BRG frequency divider
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    description:
+      Must contain a list of pairs of references to DMA specifiers, one for
+      transmission, and one for reception.
+
+  dma-names:
+    minItems: 2
+    maxItems: 4
+    items:
+      enum:
+        - tx
+        - rx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,rcar-gen2-scif
+          - renesas,rcar-gen3-scif
+then:
+  required:
+    - resets
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7791-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7791-sysc.h>
+    aliases {
+            serial0 = &scif0;
+    };
+
+    scif0: serial@e6e60000 {
+            compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif",
+                         "renesas,scif";
+            reg = <0xe6e60000 64>;
+            interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 721>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
+                     <&scif_clk>;
+            clock-names = "fck", "brg_int", "scif_clk";
+            dmas = <&dmac0 0x29>, <&dmac0 0x2a>, <&dmac1 0x29>, <&dmac1 0x2a>;
+            dma-names = "tx", "rx", "tx", "rx";
+            power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+            resets = <&cpg 721>;
+    };
diff --git a/Documentation/devicetree/bindings/serial/renesas,scifa.yaml b/Documentation/devicetree/bindings/serial/renesas,scifa.yaml
new file mode 100644
index 0000000..b28bcb2
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/renesas,scifa.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/serial/renesas,scifa.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas Serial Communications Interface with FIFO A (SCIFA)
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+allOf:
+  - $ref: serial.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,scifa-r8a73a4      # R-Mobile APE6
+              - renesas,scifa-r8a7740      # R-Mobile A1
+              - renesas,scifa-sh73a0       # SH-Mobile AG5
+          - const: renesas,scifa           # generic SCIFA compatible UART
+
+      - items:
+          - enum:
+              - renesas,scifa-r8a7743      # R8A7743 RZ/G1M
+              - renesas,scifa-r8a7744      # R8A7744 RZ/G1N
+              - renesas,scifa-r8a7745      # R8A7745 RZ/G1E
+              - renesas,scifa-r8a7790      # R8A7790 R-Car H2
+              - renesas,scifa-r8a7791      # R8A7791 R-Car M2-W
+              - renesas,scifa-r8a7793      # R8A7793 R-Car M2-N
+              - renesas,scifa-r8a7794      # R8A7794 R-Car E2
+          - const: renesas,rcar-gen2-scifa # R-Car Gen2 and RZ/G1
+          - const: renesas,scifa           # generic SCIFA compatible UART
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    enum:
+      - fck # UART functional clock
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    description:
+      Must contain a list of pairs of references to DMA specifiers, one for
+      transmission, and one for reception.
+
+  dma-names:
+    minItems: 2
+    maxItems: 4
+    items:
+      enum:
+        - tx
+        - rx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,rcar-gen2-scifa
+then:
+  required:
+    - resets
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7790-sysc.h>
+    aliases {
+            serial0 = &scifa0;
+    };
+
+    scifa0: serial@e6c40000 {
+            compatible = "renesas,scifa-r8a7790", "renesas,rcar-gen2-scifa",
+                         "renesas,scifa";
+            reg = <0xe6c40000 64>;
+            interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 204>;
+            clock-names = "fck";
+            power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+            resets = <&cpg 204>;
+            dmas = <&dmac0 0x21>, <&dmac0 0x22>, <&dmac1 0x21>, <&dmac1 0x22>;
+            dma-names = "tx", "rx", "tx", "rx";
+    };
diff --git a/Documentation/devicetree/bindings/serial/renesas,scifb.yaml b/Documentation/devicetree/bindings/serial/renesas,scifb.yaml
new file mode 100644
index 0000000..57205cb
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/renesas,scifb.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/serial/renesas,scifb.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas Serial Communications Interface with FIFO B (SCIFB)
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+allOf:
+  - $ref: serial.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,scifb-r8a73a4      # R-Mobile APE6
+              - renesas,scifb-r8a7740      # R-Mobile A1
+              - renesas,scifb-sh73a0       # SH-Mobile AG5
+          - const: renesas,scifb           # generic SCIFB compatible UART
+
+      - items:
+          - enum:
+              - renesas,scifb-r8a7743      # RZ/G1M
+              - renesas,scifb-r8a7744      # RZ/G1N
+              - renesas,scifb-r8a7745      # RZ/G1E
+              - renesas,scifb-r8a7790      # R-Car H2
+              - renesas,scifb-r8a7791      # R-Car M2-W
+              - renesas,scifb-r8a7793      # R-Car M2-N
+              - renesas,scifb-r8a7794      # R-Car E2
+          - const: renesas,rcar-gen2-scifb # R-Car Gen2 and RZ/G1
+          - const: renesas,scifb           # generic SCIFB compatible UART
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    enum:
+      - fck # UART functional clock
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    description:
+      Must contain a list of pairs of references to DMA specifiers, one for
+      transmission, and one for reception.
+
+  dma-names:
+    minItems: 2
+    maxItems: 4
+    items:
+      enum:
+        - tx
+        - rx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,rcar-gen2-scifb
+then:
+  required:
+    - resets
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7740-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    scifb: serial@e6c30000 {
+            compatible = "renesas,scifb-r8a7740", "renesas,scifb";
+            reg = <0xe6c30000 0x100>;
+            interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&mstp2_clks R8A7740_CLK_SCIFB>;
+            clock-names = "fck";
+            power-domains = <&pd_a3sp>;
+    };
diff --git a/Documentation/devicetree/bindings/serial/serial.txt b/Documentation/devicetree/bindings/serial/serial.txt
deleted file mode 100644
index 863c289..0000000
--- a/Documentation/devicetree/bindings/serial/serial.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-Generic Serial DT Bindings
-
-This document lists a set of generic properties for describing UARTs in a
-device tree.  Whether these properties apply to a particular device depends on
-the DT bindings for the actual device.
-
-Optional properties:
-  - cts-gpios: Must contain a GPIO specifier, referring to the GPIO pin to be
-    used as the UART's CTS line.
-  - dcd-gpios: Must contain a GPIO specifier, referring to the GPIO pin to be
-    used as the UART's DCD line.
-  - dsr-gpios: Must contain a GPIO specifier, referring to the GPIO pin to be
-    used as the UART's DSR line.
-  - dtr-gpios: Must contain a GPIO specifier, referring to the GPIO pin to be
-    used as the UART's DTR line.
-  - rng-gpios: Must contain a GPIO specifier, referring to the GPIO pin to be
-    used as the UART's RNG line.
-  - rts-gpios: Must contain a GPIO specifier, referring to the GPIO pin to be
-    used as the UART's RTS line.
-
-  - uart-has-rtscts: The presence of this property indicates that the
-    UART has dedicated lines for RTS/CTS hardware flow control, and that
-    they are available for use (wired and enabled by pinmux configuration).
-    This depends on both the UART hardware and the board wiring.
-    Note that this property is mutually-exclusive with "cts-gpios" and
-    "rts-gpios" above, unless support is provided to switch between modes
-    dynamically.
-
-
-Examples:
-
-	uart1: serial@48022000 {
-		compatible = "ti,am3352-uart", "ti,omap3-uart";
-		ti,hwmods = "uart2";
-		clock-frequency = <48000000>;
-		reg = <0x48022000 0x2000>;
-		interrupts = <73>;
-		dmas = <&edma 28 0>, <&edma 29 0>;
-		dma-names = "tx", "rx";
-		dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
-		dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
-		dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
-		rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
-		cts-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
-		rts-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
-	};
-
-	scifa4: serial@e6c80000 {
-		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
-		reg = <0xe6c80000 0x100>;
-		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks SH73A0_CLK_SCIFA4>;
-		clock-names = "fck";
-		power-domains = <&pd_a3sp>;
-		uart-has-rtscts;
-	};
diff --git a/Documentation/devicetree/bindings/serial/serial.yaml b/Documentation/devicetree/bindings/serial/serial.yaml
new file mode 100644
index 0000000..53204d9
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/serial.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/serial/serial.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Serial Interface Generic DT Bindings
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+  - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+description:
+  This document lists a set of generic properties for describing UARTs in a
+  device tree.  Whether these properties apply to a particular device depends
+  on the DT bindings for the actual device.
+
+  Each enabled UART may have an optional "serialN" alias in the "aliases" node,
+  where N is the port number (non-negative decimal integer) as printed on the
+  label next to the physical port.
+
+properties:
+  $nodename:
+    pattern: "^serial(@.*)?$"
+
+  cts-gpios:
+    maxItems: 1
+    description:
+      Must contain a GPIO specifier, referring to the GPIO pin to be used as
+      the UART's CTS line.
+
+  dcd-gpios:
+    maxItems: 1
+    description:
+      Must contain a GPIO specifier, referring to the GPIO pin to be used as
+      the UART's DCD line.
+
+  dsr-gpios:
+    maxItems: 1
+    description:
+      Must contain a GPIO specifier, referring to the GPIO pin to be used as
+      the UART's DSR line.
+
+  dtr-gpios:
+    maxItems: 1
+    description:
+      Must contain a GPIO specifier, referring to the GPIO pin to be used as
+      the UART's DTR line.
+
+  rng-gpios:
+    maxItems: 1
+    description:
+      Must contain a GPIO specifier, referring to the GPIO pin to be used as
+      the UART's RNG line.
+
+  rts-gpios:
+    maxItems: 1
+    description:
+      Must contain a GPIO specifier, referring to the GPIO pin to be used as
+      the UART's RTS line.
+
+  uart-has-rtscts:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The presence of this property indicates that the UART has dedicated lines
+      for RTS/CTS hardware flow control, and that they are available for use
+      (wired and enabled by pinmux configuration).  This depends on both the
+      UART hardware and the board wiring.
+
+if:
+  required:
+    - uart-has-rtscts
+then:
+  properties:
+    cts-gpios: false
+    rts-gpios: false
+
+patternProperties:
+  ".*":
+    if:
+      type: object
+    then:
+      description:
+        Serial attached devices shall be a child node of the host UART device
+        the slave device is attached to. It is expected that the attached
+        device is the only child node of the UART device. The slave device node
+        name shall reflect the generic type of device for the node.
+
+      properties:
+        compatible:
+          description:
+            Compatible of the device connected to the serial port.
+
+        max-speed:
+          $ref: /schemas/types.yaml#/definitions/uint32
+          description:
+            The maximum baud rate the device operates at.
+            This should only be present if the maximum is less than the slave
+            device can support.  For example, a particular board has some
+            signal quality issue or the host processor can't support higher
+            baud rates.
+
+        current-speed:
+          $ref: /schemas/types.yaml#/definitions/uint32
+          description: |
+            The current baud rate the device operates at.
+            This should only be present in case a driver has no chance to know
+            the baud rate of the slave device.
+            Examples:
+              * device supports auto-baud
+              * the rate is setup by a bootloader and there is no way to reset
+                the device
+              * device baud rate is configured by its firmware but there is no
+                way to request the actual settings
+
+      required:
+        - compatible
+
+examples:
+  - |
+    serial@1234 {
+            compatible = "ns16550a";
+            reg = <0x1234 0x20>;
+            interrupts = <1>;
+
+            bluetooth {
+                    compatible = "brcm,bcm43341-bt";
+                    interrupt-parent = <&gpio>;
+                    interrupts = <10>;
+            };
+    };
diff --git a/Documentation/devicetree/bindings/serial/slave-device.txt b/Documentation/devicetree/bindings/serial/slave-device.txt
deleted file mode 100644
index 40110e0..0000000
--- a/Documentation/devicetree/bindings/serial/slave-device.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-Serial Slave Device DT binding
-
-This documents the binding structure and common properties for serial
-attached devices. Common examples include Bluetooth, WiFi, NFC and GPS
-devices.
-
-Serial attached devices shall be a child node of the host UART device the
-slave device is attached to. It is expected that the attached device is
-the only child node of the UART device. The slave device node name shall
-reflect the generic type of device for the node.
-
-Required Properties:
-
-- compatible 	: A string reflecting the vendor and specific device the node
-		  represents.
-
-Optional Properties:
-
-- max-speed	: The maximum baud rate the device operates at. This should
-		  only be present if the maximum is less than the slave device
-		  can support. For example, a particular board has some signal
-		  quality issue or the host processor can't support higher
-		  baud rates.
-- current-speed	: The current baud rate the device operates at. This should
-		  only be present in case a driver has no chance to know
-		  the baud rate of the slave device.
-		  Examples:
-		    * device supports auto-baud
-		    * the rate is setup by a bootloader and there is no
-		      way to reset the device
-		    * device baud rate is configured by its firmware but
-		      there is no way to request the actual settings
-
-Example:
-
-serial@1234 {
-	compatible = "ns16550a";
-	interrupts = <1>;
-
-	bluetooth {
-		compatible = "brcm,bcm43341-bt";
-		interrupt-parent = <&gpio>;
-		interrupts = <10>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
index b4200254..b962f8d 100644
--- a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
@@ -27,6 +27,7 @@
               - rockchip,rk3066-uart
               - rockchip,rk3188-uart
               - rockchip,rk3288-uart
+              - rockchip,rk3308-uart
               - rockchip,rk3328-uart
               - rockchip,rk3368-uart
               - rockchip,rk3399-uart
diff --git a/Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml b/Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml
new file mode 100644
index 0000000..09a3030
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/socionext,uniphier-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier UART controller
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+properties:
+  compatible:
+    const: socionext,uniphier-uart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+
+  auto-flow-control:
+    description: enable automatic flow control support.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+examples:
+  - |
+    aliases {
+        serial0 = &serial0;
+    };
+
+    serial0: serial@54006800 {
+        compatible = "socionext,uniphier-uart";
+        reg = <0x54006800 0x40>;
+        interrupts = <0 33 4>;
+        clocks = <&uart_clk>;
+    };
diff --git a/Documentation/devicetree/bindings/serial/uniphier-uart.txt b/Documentation/devicetree/bindings/serial/uniphier-uart.txt
deleted file mode 100644
index 7a1bf02..0000000
--- a/Documentation/devicetree/bindings/serial/uniphier-uart.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-UniPhier UART controller
-
-Required properties:
-- compatible: should be "socionext,uniphier-uart".
-- reg: offset and length of the register set for the device.
-- interrupts: a single interrupt specifier.
-- clocks: phandle to the input clock.
-
-Optional properties:
--auto-flow-control: enable automatic flow control support.
-
-Example:
-	aliases {
-		serial0 = &serial0;
-	};
-
-	serial0: serial@54006800 {
-		compatible = "socionext,uniphier-uart";
-		reg = <0x54006800 0x40>;
-		interrupts = <0 33 4>;
-		clocks = <&uart_clk>;
-	};
diff --git a/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml
index f548594..cb008fd 100644
--- a/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml
+++ b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml
@@ -40,6 +40,8 @@
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     canvas: video-lut@48 {
diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml
new file mode 100644
index 0000000..3cbf2d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,aips-bus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX AHB to IP Bridge
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+description: |
+  This particular peripheral is designed as the bridge between
+  AHB bus and peripherals with the lower bandwidth IP Slave (IPS)
+  buses.
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: fsl,aips-bus
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: fsl,aips-bus
+      - const: simple-bus
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    bus@30000000 {
+      compatible = "fsl,aips-bus", "simple-bus";
+      reg = <0x30000000 0x400000>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges;
+    };
+...
diff --git a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
index 7a32404..ecac2bb 100644
--- a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
+++ b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
@@ -20,6 +20,7 @@
 - compatible:
 	"mediatek,mt2701-pwrap" for MT2701/7623 SoCs
 	"mediatek,mt6765-pwrap" for MT6765 SoCs
+	"mediatek,mt6779-pwrap" for MT6779 SoCs
 	"mediatek,mt6797-pwrap" for MT6797 SoCs
 	"mediatek,mt7622-pwrap" for MT7622 SoCs
 	"mediatek,mt8135-pwrap" for MT8135 SoCs
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
index db50126..f8fa71f 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
@@ -45,6 +45,18 @@
 			12 - Ultrasound stream manager.
 			13 - Listen stream manager.
 
+- qcom,protection-domain
+	Usage: optional
+	Value type: <stringlist>
+	Definition: Must list the protection domain service name and path
+		    that the particular apr service has a dependency on.
+	Possible values are :
+			"avs/audio", "msm/adsp/audio_pd".
+			"kernel/elf_loader", "msm/modem/wlan_pd".
+			"tms/servreg", "msm/adsp/audio_pd".
+			"tms/servreg", "msm/modem/wlan_pd".
+			"tms/servreg", "msm/slpi/sensor_pd".
+
 = EXAMPLE
 The following example represents a QDSP based sound card on a MSM8996 device
 which uses apr as communication between Apps and QDSP.
@@ -82,3 +94,41 @@
 			...
 		};
 	};
+
+= EXAMPLE 2
+The following example represents a QDSP based sound card with protection domain
+dependencies specified. Here some of the apr services are dependent on services
+running on protection domain hosted on ADSP/SLPI remote processors while others
+have no such dependency.
+
+	apr {
+		compatible = "qcom,apr-v2";
+		qcom,glink-channels = "apr_audio_svc";
+		qcom,apr-domain = <APR_DOMAIN_ADSP>;
+
+		q6core {
+			compatible = "qcom,q6core";
+			reg = <APR_SVC_ADSP_CORE>;
+		};
+
+		q6afe: q6afe {
+			compatible = "qcom,q6afe";
+			reg = <APR_SVC_AFE>;
+			qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+			...
+		};
+
+		q6asm: q6asm {
+			compatible = "qcom,q6asm";
+			reg = <APR_SVC_ASM>;
+			qcom,protection-domain = "tms/servreg", "msm/slpi/sensor_pd";
+			...
+		};
+
+		q6adm: q6adm {
+			compatible = "qcom,q6adm";
+			reg = <APR_SVC_ADM>;
+			qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+			...
+		};
+	};
diff --git a/Documentation/devicetree/bindings/sound/adi,adau7118.yaml b/Documentation/devicetree/bindings/sound/adi,adau7118.yaml
index 75e0cbe..76ee695 100644
--- a/Documentation/devicetree/bindings/sound/adi,adau7118.yaml
+++ b/Documentation/devicetree/bindings/sound/adi,adau7118.yaml
@@ -59,6 +59,8 @@
   - iovdd-supply
   - dvdd-supply
 
+additionalProperties: false
+
 examples:
   - |
     i2c {
diff --git a/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml b/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml
new file mode 100644
index 0000000..a61bccf
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,aiu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic AIU audio output controller
+
+maintainers:
+  - Jerome Brunet <jbrunet@baylibre.com>
+
+properties:
+  $nodename:
+    pattern: "^audio-controller@.*"
+
+  "#sound-dai-cells":
+    const: 2
+
+  compatible:
+    items:
+      - enum:
+        - amlogic,aiu-gxbb
+        - amlogic,aiu-gxl
+        - amlogic,aiu-meson8
+        - amlogic,aiu-meson8b
+      - const:
+          amlogic,aiu
+
+  clocks:
+    items:
+      - description: AIU peripheral clock
+      - description: I2S peripheral clock
+      - description: I2S output clock
+      - description: I2S master clock
+      - description: I2S mixer clock
+      - description: SPDIF peripheral clock
+      - description: SPDIF output clock
+      - description: SPDIF master clock
+      - description: SPDIF master clock multiplexer
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: i2s_pclk
+      - const: i2s_aoclk
+      - const: i2s_mclk
+      - const: i2s_mixer
+      - const: spdif_pclk
+      - const: spdif_aoclk
+      - const: spdif_mclk
+      - const: spdif_mclk_sel
+
+  interrupts:
+    items:
+      - description: I2S interrupt line
+      - description: SPDIF interrupt line
+
+  interrupt-names:
+    items:
+      - const: i2s
+      - const: spdif
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - reg
+  - resets
+
+examples:
+  - |
+    #include <dt-bindings/clock/gxbb-clkc.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
+
+    aiu: audio-controller@5400 {
+        compatible = "amlogic,aiu-gxl", "amlogic,aiu";
+        #sound-dai-cells = <2>;
+        reg = <0x0 0x5400 0x0 0x2ac>;
+        interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "i2s", "spdif";
+        clocks = <&clkc CLKID_AIU_GLUE>,
+                 <&clkc CLKID_I2S_OUT>,
+                 <&clkc CLKID_AOCLK_GATE>,
+                 <&clkc CLKID_CTS_AMCLK>,
+                 <&clkc CLKID_MIXER_IFACE>,
+                 <&clkc CLKID_IEC958>,
+                 <&clkc CLKID_IEC958_GATE>,
+                 <&clkc CLKID_CTS_MCLK_I958>,
+                 <&clkc CLKID_CTS_I958>;
+        clock-names = "pclk",
+                      "i2s_pclk",
+                      "i2s_aoclk",
+                      "i2s_mclk",
+                      "i2s_mixer",
+                      "spdif_pclk",
+                      "spdif_aoclk",
+                      "spdif_mclk",
+                      "spdif_mclk_sel";
+        resets = <&reset RESET_AIU>;
+    };
+
diff --git a/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml b/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml
new file mode 100644
index 0000000..f778d33
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,g12a-toacodec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic G12a Internal DAC Control Glue
+
+maintainers:
+  - Jerome Brunet <jbrunet@baylibre.com>
+
+properties:
+  $nodename:
+    pattern: "^audio-controller@.*"
+
+  "#sound-dai-cells":
+    const: 1
+
+  compatible:
+    oneOf:
+      - items:
+        - const:
+            amlogic,g12a-toacodec
+      - items:
+        - enum:
+          - amlogic,sm1-toacodec
+        - const:
+            amlogic,g12a-toacodec
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+  - reg
+  - resets
+
+examples:
+  - |
+    #include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h>
+
+    toacodec: audio-controller@740 {
+        compatible = "amlogic,g12a-toacodec";
+        reg = <0x0 0x740 0x0 0x4>;
+        #sound-dai-cells = <1>;
+        resets = <&clkc_audio AUD_RESET_TOACODEC>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
new file mode 100644
index 0000000..fb374c6
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,gx-sound-card.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic GX sound card
+
+maintainers:
+  - Jerome Brunet <jbrunet@baylibre.com>
+
+properties:
+  compatible:
+    items:
+      - const: amlogic,gx-sound-card
+
+  audio-aux-devs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: list of auxiliary devices
+
+  audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    minItems: 2
+    description: |-
+      A list of the connections between audio components. Each entry is a
+      pair of strings, the first being the connection's sink, the second
+      being the connection's source.
+
+  audio-widgets:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    minItems: 2
+    description: |-
+      A list off component DAPM widget. Each entry is a pair of strings,
+      the first being the widget type, the second being the widget name
+
+  model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: User specified audio sound card name
+
+patternProperties:
+  "^dai-link-[0-9]+$":
+    type: object
+    description: |-
+      dai-link child nodes:
+        Container for dai-link level properties and the CODEC sub-nodes.
+        There should be at least one (and probably more) subnode of this type
+
+    properties:
+      dai-format:
+        $ref: /schemas/types.yaml#/definitions/string
+        enum: [ i2s, left-j, dsp_a ]
+
+      mclk-fs:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |-
+          Multiplication factor between the frame rate and master clock
+          rate
+
+      sound-dai:
+        $ref: /schemas/types.yaml#/definitions/phandle
+        description: phandle of the CPU DAI
+
+    patternProperties:
+      "^codec-[0-9]+$":
+        type: object
+        description: |-
+          Codecs:
+          dai-link representing backend links should have at least one subnode.
+          One subnode for each codec of the dai-link. dai-link representing
+          frontend links have no codec, therefore have no subnodes
+
+        properties:
+          sound-dai:
+            $ref: /schemas/types.yaml#/definitions/phandle
+            description: phandle of the codec DAI
+
+        required:
+          - sound-dai
+
+    required:
+      - sound-dai
+
+required:
+  - model
+  - dai-link-0
+
+examples:
+  - |
+    sound {
+        compatible = "amlogic,gx-sound-card";
+        model = "GXL-ACME-S905X-FOO";
+        audio-aux-devs = <&amp>;
+        audio-routing = "I2S ENCODER I2S IN", "I2S FIFO Playback";
+
+        dai-link-0 {
+               sound-dai = <&i2s_fifo>;
+        };
+
+        dai-link-1 {
+                sound-dai = <&i2s_encoder>;
+                dai-format = "i2s";
+                mclk-fs = <256>;
+
+                codec-0 {
+                        sound-dai = <&codec0>;
+                };
+
+                codec-1 {
+                        sound-dai = <&codec1>;
+                };
+        };
+    };
+
diff --git a/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml b/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml
new file mode 100644
index 0000000..b7c38c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,t9015.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic T9015 Internal Audio DAC
+
+maintainers:
+  - Jerome Brunet <jbrunet@baylibre.com>
+
+properties:
+  $nodename:
+    pattern: "^audio-controller@.*"
+
+  "#sound-dai-cells":
+    const: 0
+
+  compatible:
+    items:
+      - const: amlogic,t9015
+
+  clocks:
+    items:
+      - description: Peripheral clock
+
+  clock-names:
+    items:
+      - const: pclk
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+
+examples:
+  - |
+    #include <dt-bindings/clock/g12a-clkc.h>
+    #include <dt-bindings/reset/amlogic,meson-g12a-reset.h>
+
+    acodec: audio-controller@32000 {
+        compatible = "amlogic,t9015";
+        reg = <0x0 0x32000 0x0 0x14>;
+        #sound-dai-cells = <0>;
+        clocks = <&clkc CLKID_AUDIO_CODEC>;
+        clock-names = "pclk";
+        resets = <&reset RESET_AUDIO_CODEC>;
+    };
+
diff --git a/Documentation/devicetree/bindings/sound/brcm,bcm63xx-audio.txt b/Documentation/devicetree/bindings/sound/brcm,bcm63xx-audio.txt
new file mode 100644
index 0000000..007f524
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/brcm,bcm63xx-audio.txt
@@ -0,0 +1,29 @@
+Broadcom DSL/PON BCM63xx Audio I2S controller
+
+Required properties:
+- compatible:     Should be "brcm,bcm63xx-i2s".
+- #address-cells: 32bit valued, 1 cell.
+- #size-cells:    32bit valued, 0 cell.
+- reg:            Should contain audio registers location and length
+- interrupts:     Should contain the interrupt for the controller.
+- clocks:         Must contain an entry for each entry in clock-names.
+                  Please refer to clock-bindings.txt.
+- clock-names:    One of each entry matching the clocks phandles list:
+                  - "i2sclk" (generated clock) Required.
+                  - "i2sosc" (fixed 200MHz clock) Required.
+
+(1) : The generated clock is required only when any of TX and RX
+      works on Master Mode.
+(2) : The fixed 200MHz clock is from internal chip and always on
+
+Example:
+
+		i2s: bcm63xx-i2s {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63xx-i2s";
+			reg = <0xFF802080 0xFF>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&i2sclk>, <&osc>;
+			clock-names = "i2sclk","i2sosc";
+		};
diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml
new file mode 100644
index 0000000..83f44f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/cirrus,cs42l51.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CS42L51 audio codec DT bindings
+
+maintainers:
+  - Olivier Moysan <olivier.moysan@st.com>
+
+properties:
+  compatible:
+      const: cirrus,cs42l51
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: MCLK
+
+  reset-gpios:
+    maxItems: 1
+
+  VL-supply:
+    description: phandle to voltage regulator of digital interface section
+
+  VD-supply:
+    description: phandle to voltage regulator of digital internal section
+
+  VA-supply:
+    description: phandle to voltage regulator of analog internal section
+
+  VAHP-supply:
+    description: phandle to voltage regulator of headphone
+
+required:
+  - compatible
+  - reg
+  - "#sound-dai-cells"
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      cs42l51@4a {
+        compatible = "cirrus,cs42l51";
+        reg = <0x4a>;
+        #sound-dai-cells = <0>;
+        clocks = <&mclk_prov>;
+        clock-names = "MCLK";
+        VL-supply = <&reg_audio>;
+        VD-supply = <&reg_audio>;
+        VA-supply = <&reg_audio>;
+        VAHP-supply = <&reg_audio>;
+        reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/sound/cs42l51.txt b/Documentation/devicetree/bindings/sound/cs42l51.txt
deleted file mode 100644
index acbd68d..0000000
--- a/Documentation/devicetree/bindings/sound/cs42l51.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-CS42L51 audio CODEC
-
-Required properties:
-
-  - compatible : "cirrus,cs42l51"
-
-  - reg : the I2C address of the device for I2C.
-
-Optional properties:
-  - VL-supply, VD-supply, VA-supply, VAHP-supply: power supplies for the device,
-    as covered in Documentation/devicetree/bindings/regulator/regulator.txt.
-
-  - reset-gpios : GPIO specification for the reset pin. If specified, it will be
-    deasserted before starting the communication with the codec.
-
-  - clocks : a list of phandles + clock-specifiers, one for each entry in
-    clock-names
-
-  - clock-names : must contain "MCLK"
-
-Example:
-
-cs42l51: cs42l51@4a {
-	compatible = "cirrus,cs42l51";
-	reg = <0x4a>;
-	clocks = <&mclk_prov>;
-	clock-names = "MCLK";
-	VL-supply = <&reg_audio>;
-	VD-supply = <&reg_audio>;
-	VA-supply = <&reg_audio>;
-	VAHP-supply = <&reg_audio>;
-	reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>;
-};
diff --git a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.txt b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.txt
deleted file mode 100644
index 8ca52dc..0000000
--- a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-Audio codec controlled by ChromeOS EC
-
-Google's ChromeOS EC codec is a digital mic codec provided by the
-Embedded Controller (EC) and is controlled via a host-command interface.
-
-An EC codec node should only be found as a sub-node of the EC node (see
-Documentation/devicetree/bindings/mfd/cros-ec.txt).
-
-Required properties:
-- compatible: Must contain "google,cros-ec-codec"
-- #sound-dai-cells: Should be 1. The cell specifies number of DAIs.
-
-Optional properties:
-- reg: Pysical base address and length of shared memory region from EC.
-       It contains 3 unsigned 32-bit integer.  The first 2 integers
-       combine to become an unsigned 64-bit physical address.  The last
-       one integer is length of the shared memory.
-- memory-region: Shared memory region to EC.  A "shared-dma-pool".  See
-                 ../reserved-memory/reserved-memory.txt for details.
-
-Example:
-
-{
-	...
-
-	reserved_mem: reserved_mem {
-		compatible = "shared-dma-pool";
-		reg = <0 0x52800000 0 0x100000>;
-		no-map;
-	};
-}
-
-cros-ec@0 {
-	compatible = "google,cros-ec-spi";
-
-	...
-
-	cros_ec_codec: ec-codec {
-		compatible = "google,cros-ec-codec";
-		#sound-dai-cells = <1>;
-		reg = <0x0 0x10500000 0x80000>;
-		memory-region = <&reserved_mem>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml
new file mode 100644
index 0000000..c84e656
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/google,cros-ec-codec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Audio codec controlled by ChromeOS EC
+
+maintainers:
+  - Cheng-Yi Chiang <cychiang@chromium.org>
+
+description: |
+  Google's ChromeOS EC codec is a digital mic codec provided by the
+  Embedded Controller (EC) and is controlled via a host-command interface.
+  An EC codec node should only be found as a sub-node of the EC node (see
+  Documentation/devicetree/bindings/mfd/cros-ec.txt).
+
+properties:
+  compatible:
+    const: google,cros-ec-codec
+
+  "#sound-dai-cells":
+    const: 1
+
+  reg:
+    items:
+      - description: |
+          Physical base address and length of shared memory region from EC.
+          It contains 3 unsigned 32-bit integer. The first 2 integers
+          combine to become an unsigned 64-bit physical address.
+          The last one integer is the length of the shared memory.
+
+  memory-region:
+    $ref: '/schemas/types.yaml#/definitions/phandle'
+    description: |
+      Shared memory region to EC.  A "shared-dma-pool".
+      See ../reserved-memory/reserved-memory.txt for details.
+
+required:
+  - compatible
+  - '#sound-dai-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    reserved_mem: reserved-mem@52800000 {
+        compatible = "shared-dma-pool";
+        reg = <0x52800000 0x100000>;
+        no-map;
+    };
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        cros-ec@0 {
+            compatible = "google,cros-ec-spi";
+            #address-cells = <2>;
+            #size-cells = <1>;
+            reg = <0>;
+            cros_ec_codec: ec-codec@10500000 {
+                compatible = "google,cros-ec-codec";
+                #sound-dai-cells = <1>;
+                reg = <0x0 0x10500000 0x80000>;
+                memory-region = <&reserved_mem>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/ingenic,aic.yaml b/Documentation/devicetree/bindings/sound/ingenic,aic.yaml
new file mode 100644
index 0000000..44f49be
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ingenic,aic.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ingenic,aic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs AC97 / I2S Controller (AIC) DT bindings
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  $nodename:
+    pattern: '^audio-controller@'
+
+  compatible:
+    oneOf:
+      - enum:
+        - ingenic,jz4740-i2s
+        - ingenic,jz4760-i2s
+        - ingenic,jz4770-i2s
+        - ingenic,jz4780-i2s
+      - items:
+        - const: ingenic,jz4725b-i2s
+        - const: ingenic,jz4740-i2s
+
+  '#sound-dai-cells':
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: AIC clock
+      - description: I2S clock
+      - description: EXT clock
+      - description: PLL/2 clock
+
+  clock-names:
+    items:
+      - const: aic
+      - const: i2s
+      - const: ext
+      - const: pll half
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for I2S RX
+      - description: DMA controller phandle and request line for I2S TX
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+  - '#sound-dai-cells'
+
+examples:
+  - |
+    #include <dt-bindings/clock/jz4740-cgu.h>
+    aic: audio-controller@10020000 {
+      compatible = "ingenic,jz4740-i2s";
+      reg = <0x10020000 0x38>;
+
+      #sound-dai-cells = <0>;
+
+      interrupt-parent = <&intc>;
+      interrupts = <18>;
+
+      clocks = <&cgu JZ4740_CLK_AIC>,
+               <&cgu JZ4740_CLK_I2S>,
+               <&cgu JZ4740_CLK_EXT>,
+               <&cgu JZ4740_CLK_PLL_HALF>;
+      clock-names = "aic", "i2s", "ext", "pll half";
+
+      dmas = <&dmac 25 0xffffffff>, <&dmac 24 0xffffffff>;
+      dma-names = "rx", "tx";
+    };
diff --git a/Documentation/devicetree/bindings/sound/ingenic,jz4740-i2s.txt b/Documentation/devicetree/bindings/sound/ingenic,jz4740-i2s.txt
deleted file mode 100644
index b623d50..0000000
--- a/Documentation/devicetree/bindings/sound/ingenic,jz4740-i2s.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Ingenic JZ4740 I2S controller
-
-Required properties:
-- compatible : "ingenic,jz4740-i2s" or "ingenic,jz4780-i2s"
-- reg : I2S registers location and length
-- clocks : AIC and I2S PLL clock specifiers.
-- clock-names: "aic" and "i2s"
-- dmas: DMA controller phandle and DMA request line for I2S Tx and Rx channels
-- dma-names: Must be "tx" and "rx"
-
-Example:
-
-i2s: i2s@10020000 {
-	compatible = "ingenic,jz4740-i2s";
-	reg = <0x10020000 0x94>;
-
-	clocks = <&cgu JZ4740_CLK_AIC>, <&cgu JZ4740_CLK_I2SPLL>;
-	clock-names = "aic", "i2s";
-
-	dmas = <&dma 2>, <&dma 3>;
-	dma-names = "tx", "rx";
-
-};
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt
index b795d28..a8f2b0c 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt
@@ -18,6 +18,7 @@
   * Headphone Jack
   * Int Spk
   * Mic Jack
+  * Int Mic
 
 - nvidia,i2s-controller : The phandle of the Tegra I2S1 controller
 - nvidia,audio-codec : The phandle of the WM8903 audio codec
diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
index 38eaf0c..a495d5f 100644
--- a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
@@ -139,6 +139,8 @@
   - "#address-cells"
   - "#size-cells"
 
+additionalProperties: false
+
 examples:
   - |
     codec@1,0{
diff --git a/Documentation/devicetree/bindings/sound/renesas,fsi.yaml b/Documentation/devicetree/bindings/sound/renesas,fsi.yaml
index 140a37f..d1b6555 100644
--- a/Documentation/devicetree/bindings/sound/renesas,fsi.yaml
+++ b/Documentation/devicetree/bindings/sound/renesas,fsi.yaml
@@ -63,6 +63,8 @@
   - reg
   - interrupts
 
+additionalProperties: false
+
 examples:
   - |
     sh_fsi2: sound@ec230000 {
diff --git a/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.txt b/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.txt
index 2469588..1ecd75d 100644
--- a/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.txt
+++ b/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.txt
@@ -10,6 +10,11 @@
 - clock-names: should be "pclk".
 - spk-depop-time-ms: speak depop time msec.
 
+Optional properties:
+
+- mute-gpios: GPIO specifier for external line driver control (typically the
+              dedicated GPIO_MUTE pin)
+
 Example for rk3328 internal codec:
 
 codec: codec@ff410000 {
@@ -18,6 +23,6 @@
 	rockchip,grf = <&grf>;
 	clocks = <&cru PCLK_ACODEC>;
 	clock-names = "pclk";
+	mute-gpios = <&grf_gpio 0 GPIO_ACTIVE_LOW>;
 	spk-depop-time-ms = 100;
-	status = "disabled";
 };
diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt
deleted file mode 100644
index 54aefab..0000000
--- a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-* Rockchip I2S controller
-
-The I2S bus (Inter-IC sound bus) is a serial link for digital
-audio data transfer between devices in the system.
-
-Required properties:
-
-- compatible: should be one of the following:
-   - "rockchip,rk3066-i2s": for rk3066
-   - "rockchip,px30-i2s", "rockchip,rk3066-i2s": for px30
-   - "rockchip,rk3036-i2s", "rockchip,rk3066-i2s": for rk3036
-   - "rockchip,rk3188-i2s", "rockchip,rk3066-i2s": for rk3188
-   - "rockchip,rk3228-i2s", "rockchip,rk3066-i2s": for rk3228
-   - "rockchip,rk3288-i2s", "rockchip,rk3066-i2s": for rk3288
-   - "rockchip,rk3328-i2s", "rockchip,rk3066-i2s": for rk3328
-   - "rockchip,rk3366-i2s", "rockchip,rk3066-i2s": for rk3366
-   - "rockchip,rk3368-i2s", "rockchip,rk3066-i2s": for rk3368
-   - "rockchip,rk3399-i2s", "rockchip,rk3066-i2s": for rk3399
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- interrupts: should contain the I2S interrupt.
-- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
-	Documentation/devicetree/bindings/dma/dma.txt
-- dma-names: should include "tx" and "rx".
-- clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names.
-- clock-names: should contain the following:
-   - "i2s_hclk": clock for I2S BUS
-   - "i2s_clk" : clock for I2S controller
-- rockchip,playback-channels: max playback channels, if not set, 8 channels default.
-- rockchip,capture-channels: max capture channels, if not set, 2 channels default.
-
-Required properties for controller which support multi channels
-playback/capture:
-
-- rockchip,grf: the phandle of the syscon node for GRF register.
-
-Example for rk3288 I2S controller:
-
-i2s@ff890000 {
-	compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s";
-	reg = <0xff890000 0x10000>;
-	interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-	dmas = <&pdma1 0>, <&pdma1 1>;
-	dma-names = "tx", "rx";
-	clock-names = "i2s_hclk", "i2s_clk";
-	clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
-	rockchip,playback-channels = <8>;
-	rockchip,capture-channels = <2>;
-};
diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml b/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml
new file mode 100644
index 0000000..7cd0e27
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/rockchip-i2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip I2S controller
+
+description:
+  The I2S bus (Inter-IC sound bus) is a serial link for digital
+  audio data transfer between devices in the system.
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    oneOf:
+      - const: rockchip,rk3066-i2s
+      - items:
+          - enum:
+            - rockchip,px30-i2s
+            - rockchip,rk3036-i2s
+            - rockchip,rk3188-i2s
+            - rockchip,rk3228-i2s
+            - rockchip,rk3288-i2s
+            - rockchip,rk3328-i2s
+            - rockchip,rk3366-i2s
+            - rockchip,rk3368-i2s
+            - rockchip,rk3399-i2s
+          - const: rockchip,rk3066-i2s
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: clock for I2S controller
+      - description: clock for I2S BUS
+
+  clock-names:
+    items:
+      - const: i2s_clk
+      - const: i2s_hclk
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  rockchip,capture-channels:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+    default: 2
+    description:
+      Max capture channels, if not set, 2 channels default.
+
+  rockchip,playback-channels:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+    default: 8
+    description:
+      Max playback channels, if not set, 8 channels default.
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle of the syscon node for the GRF register.
+      Required property for controllers which support multi channel
+      playback/capture.
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+  - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3288-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2s@ff890000 {
+      compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s";
+      reg = <0xff890000 0x10000>;
+      interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0>;
+      clock-names = "i2s_clk", "i2s_hclk";
+      dmas = <&pdma1 0>, <&pdma1 1>;
+      dma-names = "tx", "rx";
+      rockchip,capture-channels = <2>;
+      rockchip,playback-channels = <8>;
+      #sound-dai-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/rt5682.txt b/Documentation/devicetree/bindings/sound/rt5682.txt
index 30e927a2..ade1ece 100644
--- a/Documentation/devicetree/bindings/sound/rt5682.txt
+++ b/Documentation/devicetree/bindings/sound/rt5682.txt
@@ -32,6 +32,18 @@
   The delay time is realtek,btndet-delay value multiple of 8.192 ms.
   If absent, the default is 16.
 
+- #clock-cells : Should be set to '<1>',  wclk and bclk sources provided.
+- clock-output-names : Name given for DAI clocks output.
+
+- clocks : phandle and clock specifier for codec MCLK.
+- clock-names : Clock name string for 'clocks' attribute, should be "mclk".
+
+- realtek,dmic-clk-rate-hz : Set the clock rate (hz) for the requirement of
+  the particular DMIC.
+
+- realtek,dmic-delay-ms : Set the delay time (ms) for the requirement of
+  the particular DMIC.
+
 Pins on the device (for linking into audio routes) for RT5682:
 
   * DMIC L1
@@ -53,4 +65,10 @@
 	realtek,dmic1-clk-pin = <1>;
 	realtek,jd-src = <1>;
 	realtek,btndet-delay = <16>;
+
+	#clock-cells = <1>;
+	clock-output-names = "rt5682-dai-wclk", "rt5682-dai-bclk";
+
+	clocks = <&osc>;
+	clock-names = "mclk";
 };
diff --git a/Documentation/devicetree/bindings/sound/samsung,odroid.yaml b/Documentation/devicetree/bindings/sound/samsung,odroid.yaml
index c6b2443..8ff2d39 100644
--- a/Documentation/devicetree/bindings/sound/samsung,odroid.yaml
+++ b/Documentation/devicetree/bindings/sound/samsung,odroid.yaml
@@ -69,6 +69,8 @@
   - cpu
   - codec
 
+additionalProperties: false
+
 examples:
   - |
     sound {
diff --git a/Documentation/devicetree/bindings/sound/samsung-i2s.yaml b/Documentation/devicetree/bindings/sound/samsung-i2s.yaml
index 53e3bad..b2ad093 100644
--- a/Documentation/devicetree/bindings/sound/samsung-i2s.yaml
+++ b/Documentation/devicetree/bindings/sound/samsung-i2s.yaml
@@ -115,6 +115,8 @@
   - clocks
   - clock-names
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/exynos-audss-clk.h>
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt b/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt
deleted file mode 100644
index cbf24bc..0000000
--- a/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt
+++ /dev/null
@@ -1,62 +0,0 @@
-STMicroelectronics STM32 SPI/I2S Controller
-
-The SPI/I2S block supports I2S/PCM protocols when configured on I2S mode.
-Only some SPI instances support I2S.
-
-Required properties:
-  - compatible: Must be "st,stm32h7-i2s"
-  - reg: Offset and length of the device's register set.
-  - interrupts: Must contain the interrupt line id.
-  - clocks: Must contain phandle and clock specifier pairs for each entry
-	in clock-names.
-  - clock-names: Must contain "i2sclk", "pclk", "x8k" and "x11k".
-	"i2sclk": clock which feeds the internal clock generator
-	"pclk": clock which feeds the peripheral bus interface
-	"x8k": I2S parent clock for sampling rates multiple of 8kHz.
-	"x11k": I2S parent clock for sampling rates multiple of 11.025kHz.
-  - dmas: DMA specifiers for tx and rx dma.
-    See Documentation/devicetree/bindings/dma/stm32-dma.txt.
-  - dma-names: Identifier for each DMA request line. Must be "tx" and "rx".
-  - pinctrl-names: should contain only value "default"
-  - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
-
-Optional properties:
-  - resets: Reference to a reset controller asserting the reset controller
-
-The device node should contain one 'port' child node with one child 'endpoint'
-node, according to the bindings defined in Documentation/devicetree/bindings/
-graph.txt.
-
-Example:
-sound_card {
-	compatible = "audio-graph-card";
-	dais = <&i2s2_port>;
-};
-
-i2s2: audio-controller@40003800 {
-	compatible = "st,stm32h7-i2s";
-	reg = <0x40003800 0x400>;
-	interrupts = <36>;
-	clocks = <&rcc PCLK1>, <&rcc SPI2_CK>, <&rcc PLL1_Q>, <&rcc PLL2_P>;
-	clock-names = "pclk", "i2sclk",  "x8k", "x11k";
-	dmas = <&dmamux2 2 39 0x400 0x1>,
-           <&dmamux2 3 40 0x400 0x1>;
-	dma-names = "rx", "tx";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2s2>;
-
-	i2s2_port: port@0 {
-		cpu_endpoint: endpoint {
-			remote-endpoint = <&codec_endpoint>;
-			format = "i2s";
-		};
-	};
-};
-
-audio-codec {
-	codec_port: port@0 {
-		codec_endpoint: endpoint {
-			remote-endpoint = <&cpu_endpoint>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml b/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml
new file mode 100644
index 0000000..f324108
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/st,stm32-i2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 SPI/I2S Controller
+
+maintainers:
+  - Olivier Moysan <olivier.moysan@st.com>
+
+description:
+  The SPI/I2S block supports I2S/PCM protocols when configured on I2S mode.
+  Only some SPI instances support I2S.
+
+properties:
+  compatible:
+    enum:
+      - st,stm32h7-i2s
+
+  "#sound-dai-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: clock feeding the peripheral bus interface.
+      - description: clock feeding the internal clock generator.
+      - description: I2S parent clock for sampling rates multiple of 8kHz.
+      - description: I2S parent clock for sampling rates multiple of 11.025kHz.
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: i2sclk
+      - const: x8k
+      - const: x11k
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: audio capture DMA.
+      - description: audio playback DMA.
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#sound-dai-cells"
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    i2s2: audio-controller@4000b000 {
+        compatible = "st,stm32h7-i2s";
+        #sound-dai-cells = <0>;
+        reg = <0x4000b000 0x400>;
+        clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
+        clock-names = "pclk", "i2sclk", "x8k", "x11k";
+        interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+        dmas = <&dmamux1 39 0x400 0x01>,
+               <&dmamux1 40 0x400 0x01>;
+        dma-names = "rx", "tx";
+        pinctrl-names = "default";
+        pinctrl-0 = <&i2s2_pins_a>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt
deleted file mode 100644
index ca91017..0000000
--- a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-STMicroelectronics STM32 S/PDIF receiver (SPDIFRX).
-
-The SPDIFRX peripheral, is designed to receive an S/PDIF flow compliant with
-IEC-60958 and IEC-61937.
-
-Required properties:
-  - compatible: should be "st,stm32h7-spdifrx"
-  - reg: cpu DAI IP base address and size
-  - clocks: must contain an entry for kclk (used as S/PDIF signal reference)
-  - clock-names: must contain "kclk"
-  - interrupts: cpu DAI interrupt line
-  - dmas: DMA specifiers for audio data DMA and iec control flow DMA
-    See STM32 DMA bindings, Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
-  - dma-names: two dmas have to be defined, "rx" and "rx-ctrl"
-
-Optional properties:
-  - resets: Reference to a reset controller asserting the SPDIFRX
-
-The device node should contain one 'port' child node with one child 'endpoint'
-node, according to the bindings defined in Documentation/devicetree/bindings/
-graph.txt.
-
-Example:
-spdifrx: spdifrx@40004000 {
-	compatible = "st,stm32h7-spdifrx";
-	reg = <0x40004000 0x400>;
-	clocks = <&rcc SPDIFRX_CK>;
-	clock-names = "kclk";
-	interrupts = <97>;
-	dmas = <&dmamux1 2 93 0x400 0x0>,
-	       <&dmamux1 3 94 0x400 0x0>;
-	dma-names = "rx", "rx-ctrl";
-	pinctrl-0 = <&spdifrx_pins>;
-	pinctrl-names = "default";
-
-	spdifrx_port: port {
-		cpu_endpoint: endpoint {
-			remote-endpoint = <&codec_endpoint>;
-		};
-	};
-};
-
-spdif_in: spdif-in {
-	compatible = "linux,spdif-dir";
-
-	codec_port: port {
-		codec_endpoint: endpoint {
-			remote-endpoint = <&cpu_endpoint>;
-		};
-	};
-};
-
-soundcard {
-	compatible = "audio-graph-card";
-	dais = <&spdifrx_port>;
-};
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml
new file mode 100644
index 0000000..b7f7dc4
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/st,stm32-spdifrx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 S/PDIF receiver (SPDIFRX)
+
+maintainers:
+  - Olivier Moysan <olivier.moysan@st.com>
+
+description: |
+  The SPDIFRX peripheral, is designed to receive an S/PDIF flow compliant with
+  IEC-60958 and IEC-61937.
+
+properties:
+  compatible:
+    enum:
+      - st,stm32h7-spdifrx
+
+  "#sound-dai-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: kclk
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: audio data capture DMA
+      - description: IEC status bits capture DMA
+
+  dma-names:
+    items:
+      - const: rx
+      - const: rx-ctrl
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#sound-dai-cells"
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    spdifrx: spdifrx@40004000 {
+        compatible = "st,stm32h7-spdifrx";
+        #sound-dai-cells = <0>;
+        reg = <0x40004000 0x400>;
+        clocks = <&rcc SPDIF_K>;
+        clock-names = "kclk";
+        interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+        dmas = <&dmamux1 2 93 0x400 0x0>,
+               <&dmamux1 3 94 0x400 0x0>;
+        dma-names = "rx", "rx-ctrl";
+        pinctrl-0 = <&spdifrx_pins>;
+        pinctrl-names = "default";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/tas2562.txt b/Documentation/devicetree/bindings/sound/tas2562.txt
index 658e1fb..94796b5 100644
--- a/Documentation/devicetree/bindings/sound/tas2562.txt
+++ b/Documentation/devicetree/bindings/sound/tas2562.txt
@@ -8,7 +8,7 @@
 Required properties:
  - #address-cells  - Should be <1>.
  - #size-cells     - Should be <0>.
- - compatible:	   - Should contain "ti,tas2562".
+ - compatible:	   - Should contain "ti,tas2562", "ti,tas2563".
  - reg:		   - The i2c address. Should be 0x4c, 0x4d, 0x4e or 0x4f.
  - ti,imon-slot-no:- TDM TX current sense time slot.
 
diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
new file mode 100644
index 0000000..ab2268c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
+# Copyright (C) 2019 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/tlv320adcx140.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TLV320ADCX140 Quad Channel Analog-to-Digital Converter
+
+maintainers:
+  - Dan Murphy <dmurphy@ti.com>
+
+description: |
+  The TLV320ADCX140 are multichannel (4-ch analog recording or 8-ch digital
+  PDM microphones recording), high-performance audio, analog-to-digital
+  converter (ADC) with analog inputs supporting up to 2V RMS. The TLV320ADCX140
+  family supports line and  microphone Inputs, and offers a programmable
+  microphone bias or supply voltage generation.
+
+  Specifications can be found at:
+    http://www.ti.com/lit/ds/symlink/tlv320adc3140.pdf
+    http://www.ti.com/lit/ds/symlink/tlv320adc5140.pdf
+    http://www.ti.com/lit/ds/symlink/tlv320adc6140.pdf
+
+properties:
+  compatible:
+    oneOf:
+      - const: ti,tlv320adc3140
+      - const: ti,tlv320adc5140
+      - const: ti,tlv320adc6140
+
+  reg:
+    maxItems: 1
+    description: |
+       I2C addresss of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f
+
+  reset-gpios:
+    description: |
+       GPIO used for hardware reset.
+
+  areg-supply:
+      description: |
+       Regulator with AVDD at 3.3V.  If not defined then the internal regulator
+       is enabled.
+
+  ti,mic-bias-source:
+    description: |
+       Indicates the source for MIC Bias.
+       0 - Mic bias is set to VREF
+       1 - Mic bias is set to VREF × 1.096
+       6 - Mic bias is set to AVDD
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [0, 1, 6]
+
+  ti,vref-source:
+    description: |
+       Indicates the source for MIC Bias.
+       0 - Set VREF to 2.75V
+       1 - Set VREF to 2.5V
+       2 - Set VREF to 1.375V
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [0, 1, 2]
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      codec: codec@4c {
+        compatible = "ti,tlv320adc5140";
+        reg = <0x4c>;
+        ti,mic-bias-source = <6>;
+        reset-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml
index 0565dc4..243a6b1 100644
--- a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml
+++ b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml
@@ -18,9 +18,14 @@
   "#size-cells": true
 
   compatible:
-    enum:
-      - allwinner,sun6i-a31-spi
-      - allwinner,sun8i-h3-spi
+    oneOf:
+      - const: allwinner,sun6i-a31-spi
+      - const: allwinner,sun8i-h3-spi
+      - items:
+        - enum:
+          - allwinner,sun8i-r40-spi
+          - allwinner,sun50i-h6-spi
+        - const: allwinner,sun8i-h3-spi
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.txt b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.txt
deleted file mode 100644
index 1d64b61..0000000
--- a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Qualcomm Quad Serial Peripheral Interface (QSPI)
-
-The QSPI controller allows SPI protocol communication in single, dual, or quad
-wire transmission modes for read/write access to slaves such as NOR flash.
-
-Required properties:
-- compatible:	An SoC specific identifier followed by "qcom,qspi-v1", such as
-		"qcom,sdm845-qspi", "qcom,qspi-v1"
-- reg:		Should contain the base register location and length.
-- interrupts:	Interrupt number used by the controller.
-- clocks:	Should contain the core and AHB clock.
-- clock-names:	Should be "core" for core clock and "iface" for AHB clock.
-
-SPI slave nodes must be children of the SPI master node and can contain
-properties described in Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Example:
-
-	qspi: spi@88df000 {
-		compatible = "qcom,sdm845-qspi", "qcom,qspi-v1";
-		reg = <0x88df000 0x600>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-		clock-names = "iface", "core";
-		clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
-			 <&gcc GCC_QSPI_CORE_CLK>;
-
-		flash@0 {
-			compatible = "jedec,spi-nor";
-			reg = <0>;
-			spi-max-frequency = <25000000>;
-			spi-tx-bus-width = <2>;
-			spi-rx-bus-width = <2>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
new file mode 100644
index 0000000..5c16cf5
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/spi/qcom,spi-qcom-qspi.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Quad Serial Peripheral Interface (QSPI)
+
+maintainers:
+ - Mukesh Savaliya <msavaliy@codeaurora.org>
+ - Akash Asthana <akashast@codeaurora.org>
+
+description:
+ The QSPI controller allows SPI protocol communication in single, dual, or quad
+ wire transmission modes for read/write access to slaves such as NOR flash.
+
+allOf:
+  - $ref: /spi/spi-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: qcom,sdm845-qspi
+      - const: qcom,qspi-v1
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: iface
+      - const: core
+
+  clocks:
+    items:
+      - description: AHB clock
+      - description: QSPI core clock
+
+  interconnects:
+    minItems: 1
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: qspi-config
+      - const: qspi-memory
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc: soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        qspi: spi@88df000 {
+            compatible = "qcom,sdm845-qspi", "qcom,qspi-v1";
+            reg = <0 0x88df000 0 0x600>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+            clock-names = "iface", "core";
+            clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+                         <&gcc GCC_QSPI_CORE_CLK>;
+
+            flash@0 {
+                compatible = "jedec,spi-nor";
+                reg = <0>;
+                spi-max-frequency = <25000000>;
+                spi-tx-bus-width = <2>;
+                spi-rx-bus-width = <2>;
+            };
+
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml b/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml
index 222990f..930188b 100644
--- a/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml
+++ b/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml
@@ -43,6 +43,9 @@
   '#size-cells':
     const: 1
 
+  ranges:
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -51,9 +54,12 @@
   - clock-names
   - '#address-cells'
   - '#size-cells'
+  - ranges
+
+additionalProperties: false
 
 patternProperties:
-  "^.+-sram$":
+  "-sram@[0-9a-f]+$":
     type: object
     description: A region of reserved memory.
 
@@ -61,12 +67,8 @@
       reg:
         maxItems: 1
 
-      ranges:
-        maxItems: 1
-
     required:
       - reg
-      - ranges
 
 examples:
   - |
@@ -88,9 +90,9 @@
 
         #address-cells = <1>;
         #size-cells = <1>;
+        ranges = <0 0xfec00000 0x100000>;
 
         gmu-sram@0 {
                 reg = <0x0 0x100000>;
-                ranges = <0 0 0xfec00000 0x100000>;
         };
       };
diff --git a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
index f761681..e43ec50 100644
--- a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
@@ -32,6 +32,8 @@
     description: phandle to the ao-secure syscon
     $ref: '/schemas/types.yaml#/definitions/phandle'
 
+  '#thermal-sensor-cells':
+    const: 0
 
 required:
   - compatible
@@ -40,6 +42,8 @@
   - clocks
   - amlogic,ao-secure
 
+additionalProperties: false
+
 examples:
   - |
         cpu_temp: temperature-sensor@ff634800 {
diff --git a/Documentation/devicetree/bindings/thermal/armada-thermal.txt b/Documentation/devicetree/bindings/thermal/armada-thermal.txt
index f3b4411..b0bee7e 100644
--- a/Documentation/devicetree/bindings/thermal/armada-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/armada-thermal.txt
@@ -12,7 +12,7 @@
 
 Note: these bindings are deprecated for AP806/CP110 and should instead
 follow the rules described in:
-Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
+Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt
 Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt
 
 - reg: Device's register space.
diff --git a/Documentation/devicetree/bindings/thermal/imx8mm-thermal.txt b/Documentation/devicetree/bindings/thermal/imx8mm-thermal.txt
new file mode 100644
index 0000000..3629d3c
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/imx8mm-thermal.txt
@@ -0,0 +1,15 @@
+* Thermal Monitoring Unit (TMU) on Freescale i.MX8MM SoC
+
+Required properties:
+- compatible : Must be "fsl,imx8mm-tmu" or "fsl,imx8mp-tmu".
+- reg : Address range of TMU registers.
+- clocks : TMU's clock source.
+- #thermal-sensor-cells : Should be 0 or 1. See ./thermal.txt for a description.
+
+Example:
+tmu: tmu@30260000 {
+	compatible = "fsl,imx8mm-tmu";
+	reg = <0x30260000 0x10000>;
+	clocks = <&clk IMX8MM_CLK_TMU_ROOT>;
+	#thermal-sensor-cells = <0>;
+};
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index eef13b9..2ddd39d 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -38,28 +38,39 @@
           - enum:
               - qcom,msm8996-tsens
               - qcom,msm8998-tsens
+              - qcom,sc7180-tsens
               - qcom,sdm845-tsens
           - const: qcom,tsens-v2
 
   reg:
-    maxItems: 2
     items:
       - description: TM registers
       - description: SROT registers
 
+  interrupts:
+    minItems: 1
+    items:
+      - description: Combined interrupt if upper or lower threshold crossed
+      - description: Interrupt if critical threshold crossed
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: uplow
+      - const: critical
+
   nvmem-cells:
     minItems: 1
     maxItems: 2
     description:
       Reference to an nvmem node for the calibration data
 
-  nvmem-cells-names:
+  nvmem-cell-names:
     minItems: 1
     maxItems: 2
     items:
-      - enum:
-        - caldata
-        - calsel
+      - const: calib
+      - const: calib_sel
 
   "#qcom,sensors":
     allOf:
@@ -90,22 +101,16 @@
     then:
       properties:
         interrupts:
-          items:
-            - description: Combined interrupt if upper or lower threshold crossed
+          maxItems: 1
         interrupt-names:
-          items:
-            - const: uplow
+          maxItems: 1
 
     else:
       properties:
         interrupts:
-          items:
-            - description: Combined interrupt if upper or lower threshold crossed
-            - description: Interrupt if critical threshold crossed
+          minItems: 2
         interrupt-names:
-          items:
-            - const: uplow
-            - const: critical
+          minItems: 2
 
 required:
   - compatible
@@ -115,6 +120,8 @@
   - interrupt-names
   - "#thermal-sensor-cells"
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -125,7 +132,7 @@
                  <0x4a8000 0x1000>; /* SROT */
 
            nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
-           nvmem-cell-names = "caldata", "calsel";
+           nvmem-cell-names = "calib", "calib_sel";
 
            interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
            interrupt-names = "uplow";
diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt
index 12c740b..2993fa7 100644
--- a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt
@@ -11,6 +11,7 @@
 			    - "renesas,r8a774b1-thermal" (RZ/G2N)
 			    - "renesas,r8a7795-thermal" (R-Car H3)
 			    - "renesas,r8a7796-thermal" (R-Car M3-W)
+			    - "renesas,r8a77961-thermal" (R-Car M3-W+)
 			    - "renesas,r8a77965-thermal" (R-Car M3-N)
 			    - "renesas,r8a77980-thermal" (R-Car V3H)
 - reg			: Address ranges of the thermal registers. Each sensor
diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
deleted file mode 100644
index 196112d..0000000
--- a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
+++ /dev/null
@@ -1,78 +0,0 @@
-* Renesas R-Car Thermal
-
-Required properties:
-- compatible		: "renesas,thermal-<soctype>",
-			   "renesas,rcar-gen2-thermal" (with thermal-zone) or
-			   "renesas,rcar-thermal" (without thermal-zone) as
-                           fallback except R-Car V3M/E3/D3 and RZ/G2E.
-			  Examples with soctypes are:
-			    - "renesas,thermal-r8a73a4" (R-Mobile APE6)
-			    - "renesas,thermal-r8a7743" (RZ/G1M)
-			    - "renesas,thermal-r8a7744" (RZ/G1N)
-			    - "renesas,thermal-r8a774c0" (RZ/G2E)
-			    - "renesas,thermal-r8a7779" (R-Car H1)
-			    - "renesas,thermal-r8a7790" (R-Car H2)
-			    - "renesas,thermal-r8a7791" (R-Car M2-W)
-			    - "renesas,thermal-r8a7792" (R-Car V2H)
-			    - "renesas,thermal-r8a7793" (R-Car M2-N)
-			    - "renesas,thermal-r8a77970" (R-Car V3M)
-			    - "renesas,thermal-r8a77990" (R-Car E3)
-			    - "renesas,thermal-r8a77995" (R-Car D3)
-- reg			: Address range of the thermal registers.
-			  The 1st reg will be recognized as common register
-			  if it has "interrupts".
-
-Option properties:
-
-- interrupts		: If present should contain 3 interrupts for
-                          R-Car V3M/E3/D3 and RZ/G2E or 1 interrupt otherwise.
-
-Example (non interrupt support):
-
-thermal@ffc48000 {
-	compatible = "renesas,thermal-r8a7779", "renesas,rcar-thermal";
-	reg = <0xffc48000 0x38>;
-};
-
-Example (interrupt support):
-
-thermal@e61f0000 {
-	compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal";
-	reg = <0xe61f0000 0x14
-		0xe61f0100 0x38
-		0xe61f0200 0x38
-		0xe61f0300 0x38>;
-	interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-Example (with thermal-zone):
-
-thermal-zones {
-	cpu_thermal: cpu-thermal {
-		polling-delay-passive	= <1000>;
-		polling-delay		= <5000>;
-
-		thermal-sensors = <&thermal>;
-
-		trips {
-			cpu-crit {
-				temperature	= <115000>;
-				hysteresis	= <0>;
-				type		= "critical";
-			};
-		};
-		cooling-maps {
-		};
-	};
-};
-
-thermal: thermal@e61f0000 {
-	compatible =	"renesas,thermal-r8a7790",
-			"renesas,rcar-gen2-thermal",
-			"renesas,rcar-thermal";
-	reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
-	interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&mstp5_clks R8A7790_CLK_THERMAL>;
-	power-domains = <&cpg_clocks>;
-	#thermal-sensor-cells = <0>;
-};
diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml
new file mode 100644
index 0000000..d2f4f1b
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# Copyright (C) 2020 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/rcar-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Thermal
+
+maintainers:
+  - Niklas Söderlund <niklas.soderlund@ragnatech.se>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,thermal-r8a73a4 # R-Mobile APE6
+              - renesas,thermal-r8a7779 # R-Car H1
+          - const: renesas,rcar-thermal # Generic without thermal-zone
+      - items:
+          - enum:
+              - renesas,thermal-r8a7743 # RZ/G1M
+              - renesas,thermal-r8a7744 # RZ/G1N
+          - const: renesas,rcar-gen2-thermal # Generic thermal-zone
+      - items:
+          - enum:
+              - renesas,thermal-r8a7790 # R-Car H2
+              - renesas,thermal-r8a7791 # R-Car M2-W
+              - renesas,thermal-r8a7792 # R-Car V2H
+              - renesas,thermal-r8a7793 # R-Car M2-N
+          - const: renesas,rcar-gen2-thermal # Generic thermal-zone
+          - const: renesas,rcar-thermal # Generic without thermal-zone
+      - items:
+          - enum:
+              - renesas,thermal-r8a774c0 # RZ/G2E
+              - renesas,thermal-r8a77970 # R-Car V3M
+              - renesas,thermal-r8a77990 # R-Car E3
+              - renesas,thermal-r8a77995 # R-Car D3
+  reg:
+    description:
+      Address ranges of the thermal registers. If more then one range is given
+      the first one must be the common registers followed by each sensor
+      according the the datasheet.
+    minItems: 1
+    maxItems: 4
+
+  interrupts:
+    minItems: 1
+    maxItems: 3
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,thermal-r8a73a4 # R-Mobile APE6
+          - renesas,thermal-r8a7779 # R-Car H1
+then:
+  required:
+    - compatible
+    - reg
+else:
+  required:
+    - compatible
+    - reg
+    - interrupts
+    - clocks
+    - power-domains
+    - resets
+
+examples:
+  # Example (non interrupt support)
+  - |
+    thermal@ffc48000 {
+            compatible = "renesas,thermal-r8a7779", "renesas,rcar-thermal";
+            reg = <0xffc48000 0x38>;
+    };
+
+  # Example (interrupt support)
+  - |
+    #include <dt-bindings/clock/r8a73a4-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    thermal@e61f0000 {
+            compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal";
+            reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>,
+                  <0 0xe61f0200 0 0x38>, <0 0xe61f0300 0 0x38>;
+            interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&mstp5_clks R8A73A4_CLK_THERMAL>;
+            power-domains = <&pd_c5>;
+    };
+
+  # Example (with thermal-zone)
+  - |
+    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7790-sysc.h>
+
+    thermal: thermal@e61f0000 {
+      compatible = "renesas,thermal-r8a7790",
+                   "renesas,rcar-gen2-thermal",
+                   "renesas,rcar-thermal";
+            reg = <0 0xe61f0000 0 0x10>, <0 0xe61f0100 0 0x38>;
+            interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 522>;
+            power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+            resets = <&cpg 522>;
+            #thermal-sensor-cells = <0>;
+    };
+
+    thermal-zones {
+            cpu_thermal: cpu-thermal {
+                    polling-delay-passive = <1000>;
+                    polling-delay = <5000>;
+
+                    thermal-sensors = <&thermal>;
+
+                    trips {
+                            cpu-crit {
+                                    temperature = <115000>;
+                                    hysteresis = <0>;
+                                    type = "critical";
+                            };
+                    };
+                    cooling-maps {
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml b/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml
new file mode 100644
index 0000000..058c4cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/sprd-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum thermal sensor controller bindings
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+properties:
+  compatible:
+    const: sprd,ums512-thermal
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: enable
+
+  nvmem-cells:
+    maxItems: 2
+    description:
+      Reference to nvmem nodes for the calibration data.
+
+  nvmem-cell-names:
+    items:
+      - const: thm_sign_cal
+      - const: thm_ratio_cal
+
+  "#thermal-sensor-cells":
+    const: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^([a-z]*-)?sensor(-section)?@[0-9]+$":
+    type: object
+    description:
+      Represent one thermal sensor.
+
+    properties:
+      reg:
+        description: Specify the sensor id.
+        maxItems: 1
+
+      nvmem-cells:
+        maxItems: 1
+        description:
+          Reference to an nvmem node for the calibration data.
+
+      nvmem-cell-names:
+        const: sen_delta_cal
+
+    required:
+      - reg
+      - nvmem-cells
+      - nvmem-cell-names
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - nvmem-cells
+  - nvmem-cell-names
+  - "#thermal-sensor-cells"
+  - "#address-cells"
+  - "#size-cells"
+
+examples:
+  - |
+        ap_thm0: thermal@32200000 {
+                compatible = "sprd,ums512-thermal";
+                reg = <0 0x32200000 0 0x10000>;
+                clock-names = "enable";
+                clocks = <&aonapb_gate 32>;
+                #thermal-sensor-cells = <1>;
+                nvmem-cells = <&thm0_sign>, <&thm0_ratio>;
+                nvmem-cell-names = "thm_sign_cal", "thm_ratio_cal";
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                prometheus-sensor@0 {
+                        reg = <0>;
+                        nvmem-cells = <&thm0_sen0>;
+                        nvmem-cell-names = "sen_delta_cal";
+                };
+
+                ank-sensor@1 {
+                        reg = <1>;
+                        nvmem-cells = <&thm0_sen1>;
+                        nvmem-cell-names = "sen_delta_cal";
+                };
+        };
+...
diff --git a/Documentation/devicetree/bindings/thermal/thermal.txt b/Documentation/devicetree/bindings/thermal/thermal.txt
index ca14ba9..f78bec1 100644
--- a/Documentation/devicetree/bindings/thermal/thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/thermal.txt
@@ -142,11 +142,11 @@
 - trips:		A sub-node which is a container of only trip point nodes
   Type: sub-node	required to describe the thermal zone.
 
+Optional property:
 - cooling-maps:		A sub-node which is a container of only cooling device
   Type: sub-node	map nodes, used to describe the relation between trips
 			and cooling devices.
 
-Optional property:
 - coefficients:		An array of integers (one signed cell) containing
   Type: array		coefficients to compose a linear relation between
   Elem size: one cell	the sensors listed in the thermal-sensors property.
diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml
index 6deead07..fa25567 100644
--- a/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml
+++ b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml
@@ -82,6 +82,8 @@
 required:
   - compatible
 
+additionalProperties: false
+
 oneOf:
   - required:
       - interrupts
diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
index 102f319..582bbef 100644
--- a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
+++ b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
@@ -32,6 +32,8 @@
   '#size-cells':
     const: 1
 
+  ranges: true
+
   clock-frequency:
     description: The frequency of the main counter, in Hz. Should be present
       only where necessary to work around broken firmware which does not configure
@@ -93,6 +95,8 @@
   - '#address-cells'
   - '#size-cells'
 
+additionalProperties: false
+
 examples:
   - |
     timer@f0000000 {
diff --git a/Documentation/devicetree/bindings/timer/arm,global_timer.yaml b/Documentation/devicetree/bindings/timer/arm,global_timer.yaml
index 21c24a8..4956c8f 100644
--- a/Documentation/devicetree/bindings/timer/arm,global_timer.yaml
+++ b/Documentation/devicetree/bindings/timer/arm,global_timer.yaml
@@ -35,6 +35,8 @@
   - reg
   - clocks
 
+additionalProperties: false
+
 examples:
   - |
     timer@2c000600 {
diff --git a/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml b/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml
index 2807225..1a721d8 100644
--- a/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml
+++ b/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml
@@ -32,6 +32,8 @@
   - reg
   - interrupts
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
index 273e359..37bd01a 100644
--- a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
+++ b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
@@ -52,6 +52,8 @@
   - interrupts
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     // In this example, the IP contains two local timers, using separate
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index 330cab2..4165352 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -34,10 +34,6 @@
           - adi,adt7461
             # +/-1C TDM Extended Temp Range I.C
           - adt7461
-            # Three-Axis Digital Accelerometer
-          - adi,adxl345
-            # Three-Axis Digital Accelerometer (backward-compatibility value "adi,adxl345" must be listed too)
-          - adi,adxl346
             # AMS iAQ-Core VOC Sensor
           - ams,iaq-core
             # i2c serial eeprom  (24cxx)
@@ -367,4 +363,6 @@
   - compatible
   - reg
 
+additionalProperties: false
+
 ...
diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml
index 6baf00e..0d6d850 100644
--- a/Documentation/devicetree/bindings/usb/dwc2.yaml
+++ b/Documentation/devicetree/bindings/usb/dwc2.yaml
@@ -32,20 +32,19 @@
       - const: lantiq,arx100-usb
       - const: lantiq,xrx200-usb
       - items:
-          - const: amlogic,meson8-usb
-          - const: snps,dwc2
-      - items:
-          - const: amlogic,meson8b-usb
-          - const: snps,dwc2
-      - const: amlogic,meson-gxbb-usb
-      - items:
-          - const: amlogic,meson-g12a-usb
+          - enum:
+            - amlogic,meson8-usb
+            - amlogic,meson8b-usb
+            - amlogic,meson-gxbb-usb
+            - amlogic,meson-g12a-usb
           - const: snps,dwc2
       - const: amcc,dwc-otg
       - const: snps,dwc2
       - const: st,stm32f4x9-fsotg
       - const: st,stm32f4x9-hsotg
       - const: st,stm32f7-hsotg
+      - const: st,stm32mp15-fsotg
+      - const: st,stm32mp15-hsotg
       - const: samsung,s3c6400-hsotg
 
   reg:
@@ -91,6 +90,10 @@
   vusb_a-supply:
     description: phandle to voltage regulator of analog section.
 
+  vusb33d-supply:
+    description: reference to the VBUS and ID sensing comparators supply, in
+      order to perform OTG operation, used on STM32MP15 SoCs.
+
   dr_mode:
     enum: [host, peripheral, otg]
 
diff --git a/Documentation/devicetree/bindings/usb/exynos-usb.txt b/Documentation/devicetree/bindings/usb/exynos-usb.txt
index 66c394f..6aae154 100644
--- a/Documentation/devicetree/bindings/usb/exynos-usb.txt
+++ b/Documentation/devicetree/bindings/usb/exynos-usb.txt
@@ -78,7 +78,14 @@
  - ranges: allows valid 1:1 translation between child's address space and
 	   parent's address space
  - clocks: Clock IDs array as required by the controller.
- - clock-names: names of clocks correseponding to IDs in the clock property
+ - clock-names: Names of clocks corresponding to IDs in the clock property.
+                Following clock names shall be provided for different
+                compatibles:
+                 - samsung,exynos5250-dwusb3: "usbdrd30",
+                 - samsung,exynos5433-dwusb3: "aclk", "susp_clk", "pipe_pclk",
+                                              "phyclk",
+                 - samsung,exynos7-dwusb3: "usbdrd30", "usbdrd30_susp_clk",
+                                           "usbdrd30_axius_clk"
  - vdd10-supply: 1.0V powr supply
  - vdd33-supply: 3.0V/3.3V power supply
 
diff --git a/Documentation/devicetree/bindings/usb/fcs,fusb302.txt b/Documentation/devicetree/bindings/usb/fcs,fusb302.txt
index ba2e32d..60e4654 100644
--- a/Documentation/devicetree/bindings/usb/fcs,fusb302.txt
+++ b/Documentation/devicetree/bindings/usb/fcs,fusb302.txt
@@ -9,7 +9,7 @@
 - connector : The "usb-c-connector" attached to the FUSB302 IC. The bindings
   of the connector node are specified in:
 
-	Documentation/devicetree/bindings/connector/usb-connector.txt
+	Documentation/devicetree/bindings/connector/usb-connector.yaml
 
 
 Example:
diff --git a/Documentation/devicetree/bindings/usb/generic.txt b/Documentation/devicetree/bindings/usb/generic.txt
index 67c5175..ba472e7 100644
--- a/Documentation/devicetree/bindings/usb/generic.txt
+++ b/Documentation/devicetree/bindings/usb/generic.txt
@@ -34,7 +34,7 @@
  - usb-role-switch: boolean, indicates that the device is capable of assigning
 			the USB data role (USB host or USB device) for a given
 			USB connector, such as Type-C, Type-B(micro).
-			see connector/usb-connector.txt.
+			see connector/usb-connector.yaml.
  - role-switch-default-mode: indicating if usb-role-switch is enabled, the
 			device default operation mode of controller while usb
 			role is USB_ROLE_NONE. Valid arguments are "host" and
diff --git a/Documentation/devicetree/bindings/usb/ingenic,musb.yaml b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml
index 1d68778..c2d2ee4 100644
--- a/Documentation/devicetree/bindings/usb/ingenic,musb.yaml
+++ b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml
@@ -56,7 +56,7 @@
 examples:
   - |
     #include <dt-bindings/clock/jz4740-cgu.h>
-    usb_phy: usb-phy@0 {
+    usb_phy: usb-phy {
       compatible = "usb-nop-xceiv";
       #phy-cells = <0>;
     };
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
index e0ae609..a82ca43 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
@@ -34,7 +34,7 @@
 	dual-role mode.
 	it's considered valid for compatibility reasons, not allowed for
 	new bindings, and put into a usb-connector node.
-	see connector/usb-connector.txt.
+	see connector/usb-connector.yaml.
  - pinctrl-names : a pinctrl state named "default" is optional, and need be
 	defined if auto drd switch is enabled, that means the property dr_mode
 	is set as "otg", and meanwhile the property "mediatek,enable-manual-drd"
diff --git a/Documentation/devicetree/bindings/usb/mediatek,musb.txt b/Documentation/devicetree/bindings/usb/mediatek,musb.txt
index 2b8a87c..5eedb02 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,musb.txt
+++ b/Documentation/devicetree/bindings/usb/mediatek,musb.txt
@@ -23,7 +23,7 @@
                      MTCMOS
 
 Required child nodes:
- usb connector node as defined in bindings/connector/usb-connector.txt
+ usb connector node as defined in bindings/connector/usb-connector.yaml
 Optional properties:
  - id-gpios        : input GPIO for USB ID pin.
  - vbus-gpios      : input GPIO for USB VBUS pin.
diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
new file mode 100644
index 0000000..b84ed8e
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
@@ -0,0 +1,190 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/usb/nvidia,tegra-xudc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Device tree binding for NVIDIA Tegra XUSB device mode controller (XUDC)
+
+description:
+  The Tegra XUDC controller supports both USB 2.0 HighSpeed/FullSpeed and
+  USB 3.0 SuperSpeed protocols.
+
+maintainers:
+  - Nagarjuna Kristam <nkristam@nvidia.com>
+  - JC Kuo <jckuo@nvidia.com>
+  - Thierry Reding <treding@nvidia.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - nvidia,tegra210-xudc # For Tegra210
+          - nvidia,tegra186-xudc # For Tegra186
+
+  reg:
+    minItems: 2
+    maxItems: 3
+    items:
+      - description: XUSB device controller registers
+      - description: XUSB device PCI Config registers
+      - description: XUSB device registers.
+
+  reg-names:
+    minItems: 2
+    maxItems: 3
+    items:
+      - const: base
+      - const: fpci
+      - const: ipfs
+
+  interrupts:
+    maxItems: 1
+    description: Must contain the XUSB device interrupt.
+
+  clocks:
+    minItems: 4
+    maxItems: 5
+    items:
+      - description: Clock to enable core XUSB dev clock.
+      - description: Clock to enable XUSB super speed clock.
+      - description: Clock to enable XUSB super speed dev clock.
+      - description: Clock to enable XUSB high speed dev clock.
+      - description: Clock to enable XUSB full speed dev clock.
+
+  clock-names:
+    minItems: 4
+    maxItems: 5
+    items:
+     - const: dev
+     - const: ss
+     - const: ss_src
+     - const: fs_src
+     - const: hs_src
+
+  power-domains:
+    maxItems: 2
+    items:
+      - description: XUSBB(device) power-domain
+      - description: XUSBA(superspeed) power-domain
+
+  power-domain-names:
+    maxItems: 2
+    items:
+      - const: dev
+      - const: ss
+
+  nvidia,xusb-padctl:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      phandle to the XUSB pad controller that is used to configure the USB pads
+      used by the XUDC controller.
+
+  phys:
+    minItems: 1
+    description:
+      Must contain an entry for each entry in phy-names.
+      See ../phy/phy-bindings.txt for details.
+
+  phy-names:
+    minItems: 1
+    items:
+      - const: usb2-0
+      - const: usb2-1
+      - const: usb2-2
+      - const: usb2-3
+      - const: usb3-0
+      - const: usb3-1
+      - const: usb3-2
+      - const: usb3-3
+
+  avddio-usb-supply:
+    description: PCIe/USB3 analog logic power supply. Must supply 1.05 V.
+
+  hvdd-usb-supply:
+    description: USB controller power supply. Must supply 3.3 V.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+  - power-domain-names
+  - nvidia,xusb-padctl
+  - phys
+  - phy-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra210-xudc
+    then:
+      properties:
+        reg:
+          minItems: 3
+        reg-names:
+          minItems: 3
+        clocks:
+          minItems: 5
+        clock-names:
+          minItems: 5
+      required:
+        - avddio-usb-supply
+        - hvdd-usb-supply
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra186-xudc
+    then:
+      properties:
+        reg:
+          maxItems: 2
+        reg-names:
+          maxItems: 2
+        clocks:
+          maxItems: 4
+        clock-names:
+          maxItems: 4
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/gpio/tegra-gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    usb@700d0000 {
+        compatible = "nvidia,tegra210-xudc";
+        reg = <0x0 0x700d0000 0x0 0x8000>,
+              <0x0 0x700d8000 0x0 0x1000>,
+              <0x0 0x700d9000 0x0 0x1000>;
+        reg-names = "base", "fpci", "ipfs";
+
+        interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+
+        clocks = <&tegra_car TEGRA210_CLK_XUSB_DEV>,
+                 <&tegra_car TEGRA210_CLK_XUSB_SS>,
+                 <&tegra_car TEGRA210_CLK_XUSB_SSP_SRC>,
+                 <&tegra_car TEGRA210_CLK_XUSB_FS_SRC>,
+                 <&tegra_car TEGRA210_CLK_XUSB_HS_SRC>;
+        clock-names = "dev", "ss", "ss_src", "fs_src", "hs_src";
+
+        power-domains = <&pd_xusbdev>, <&pd_xusbss>;
+        power-domain-names = "dev", "ss";
+
+        nvidia,xusb-padctl = <&padctl>;
+
+        phys = <&micro_b>;
+        phy-names = "usb2-0";
+
+        avddio-usb-supply = <&vdd_pex_1v05>;
+        hvdd-usb-supply = <&vdd_3v3_sys>;
+    };
diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
index cb695aa..fbdd017 100644
--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
@@ -52,8 +52,8 @@
 the node is not important. The content of the node is defined in dwc3.txt.
 
 Phy documentation is provided in the following places:
-Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt   - USB3 QMP PHY
-Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt - USB2 QUSB2 PHY
+Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt    - USB3 QMP PHY
+Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml - USB2 QUSB2 PHY
 
 Example device nodes:
 
diff --git a/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt b/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt
index e3fc57e..6f8115d 100644
--- a/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt
+++ b/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt
@@ -9,7 +9,7 @@
 Required sub-node:
 - connector: The "usb-c-connector" attached to the tcpci chip, the bindings
   of connector node are specified in
-  Documentation/devicetree/bindings/connector/usb-connector.txt
+  Documentation/devicetree/bindings/connector/usb-connector.yaml
 
 Example :
 rt1711h@4e {
diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
index c8c4b00..9452049 100644
--- a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
@@ -16,7 +16,7 @@
 the node is not important. The content of the node is defined in dwc3.txt.
 
 Phy documentation is provided in the following places:
-Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt - USB2.0 PHY
+Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml - USB2.0 PHY
 Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt     - Type-C PHY
 
 Example device nodes:
diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt
index 25780e9..2bd21b2 100644
--- a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt
+++ b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt
@@ -9,7 +9,7 @@
  - connector: The "usb-c-connector" attached to the hd3ss3220 chip. The
    bindings of the connector node are specified in:
 
-	Documentation/devicetree/bindings/connector/usb-connector.txt
+	Documentation/devicetree/bindings/connector/usb-connector.yaml
 
 Example:
 hd3ss3220@47 {
diff --git a/Documentation/devicetree/bindings/usb/typec-tcpci.txt b/Documentation/devicetree/bindings/usb/typec-tcpci.txt
index 0dd1469..2082522 100644
--- a/Documentation/devicetree/bindings/usb/typec-tcpci.txt
+++ b/Documentation/devicetree/bindings/usb/typec-tcpci.txt
@@ -13,7 +13,7 @@
 Required sub-node:
 - connector: The "usb-c-connector" attached to the tcpci chip, the bindings
   of connector node are specified in
-  Documentation/devicetree/bindings/connector/usb-connector.txt
+  Documentation/devicetree/bindings/connector/usb-connector.yaml
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/usb/usb-conn-gpio.txt b/Documentation/devicetree/bindings/usb/usb-conn-gpio.txt
index 3d05ae5..ec80641 100644
--- a/Documentation/devicetree/bindings/usb/usb-conn-gpio.txt
+++ b/Documentation/devicetree/bindings/usb/usb-conn-gpio.txt
@@ -8,11 +8,11 @@
 - compatible : should include "gpio-usb-b-connector" and "usb-b-connector".
 - id-gpios, vbus-gpios : input gpios, either one of them must be present,
 	and both can be present as well.
-	see connector/usb-connector.txt
+	see connector/usb-connector.yaml
 
 Optional properties:
 - vbus-supply : can be present if needed when supports dual role mode.
-	see connector/usb-connector.txt
+	see connector/usb-connector.yaml
 
 - Sub-nodes:
 	- port : can be present.
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 49467b5..d389138 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -141,6 +141,8 @@
     description: Shenzhen AZW Technology Co., Ltd.
   "^bananapi,.*":
     description: BIPAI KEJI LIMITED
+  "^beacon,.*":
+    description: Compass Electronics Group, LLC
   "^bhf,.*":
     description: Beckhoff Automation GmbH & Co. KG
   "^bitmain,.*":
@@ -235,6 +237,8 @@
     description: DataImage, Inc.
   "^davicom,.*":
     description: DAVICOM Semiconductor, Inc.
+  "^dell,.*":
+    description: Dell Inc.
   "^delta,.*":
     description: Delta Electronics, Inc.
   "^denx,.*":
@@ -289,6 +293,8 @@
     description: Elan Microelectronic Corp.
   "^elgin,.*":
     description: Elgin S/A.
+  "^elida,.*":
+    description: Shenzhen Elida Technology Co., Ltd.
   "^embest,.*":
     description: Shenzhen Embest Technology Co., Ltd.
   "^emlid,.*":
@@ -301,6 +307,8 @@
     description: emtrion GmbH
   "^endless,.*":
     description: Endless Mobile, Inc.
+  "^ene,.*":
+    description: ENE Technology, Inc.
   "^energymicro,.*":
     description: Silicon Laboratories (formerly Energy Micro AS)
   "^engicam,.*":
@@ -479,6 +487,8 @@
     description: Intersil
   "^issi,.*":
     description: Integrated Silicon Solutions Inc.
+  "^ite,.*":
+    description: ITE Tech, Inc.
   "^itead,.*":
     description: ITEAD Intelligent Systems Co.Ltd
   "^iwave,.*":
@@ -555,6 +565,8 @@
     description: LinkSprite Technologies, Inc.
   "^linksys,.*":
     description: Belkin International, Inc. (Linksys)
+  "^linutronix,.*":
+    description: Linutronix GmbH
   "^linux,.*":
     description: Linux-specific binding
   "^linx,.*":
@@ -641,6 +653,9 @@
     description: Monolithic Power Systems Inc.
   "^mqmaker,.*":
     description: mqmaker Inc.
+  "^mrvl,.*":
+    description: Marvell Technology Group Ltd.
+    deprecated: true
   "^mscc,.*":
     description: Microsemi Corporation
   "^msi,.*":
@@ -741,6 +756,8 @@
     description: OmniVision Technologies
   "^oxsemi,.*":
     description: Oxford Semiconductor, Ltd.
+  "^ozzmaker,.*":
+    description: OzzMaker
   "^panasonic,.*":
     description: Panasonic Corporation
   "^parade,.*":
@@ -775,6 +792,8 @@
     description: Broadcom Corporation (formerly PLX Technology)
   "^pni,.*":
     description: PNI Sensor Corporation
+  "^pocketbook,.*":
+    description: PocketBook International SA
   "^polaroid,.*":
     description: Polaroid Corporation
   "^portwell,.*":
@@ -873,6 +892,8 @@
     description: Small Form Factor Committee
   "^sgd,.*":
     description: Solomon Goldentek Display Corporation
+  "^sgmicro,.*":
+    description: SG Micro Corp
   "^sgx,.*":
     description: SGX Sensortech
   "^sharp,.*":
@@ -996,6 +1017,8 @@
   "^toppoly,.*":
     description: TPO (deprecated, use tpo)
     deprecated: true
+  "^topwise,.*":
+    description: Topwise Communication Co., Ltd.
   "^toradex,.*":
     description: Toradex AG
   "^toshiba,.*":
@@ -1066,6 +1089,8 @@
     description: Vision Optical Technology Co., Ltd.
   "^vxt,.*":
     description: VXT Ltd
+  "^waveshare,.*":
+    description: Waveshare Electronics
   "^wd,.*":
     description: Western Digital Corp.
   "^wetek,.*":
@@ -1092,6 +1117,8 @@
     description: X-Powers
   "^xes,.*":
     description: Extreme Engineering Solutions (X-ES)
+  "^xiaomi,.*":
+    description: Xiaomi Technology Co., Ltd.
   "^xillybus,.*":
     description: Xillybus Ltd.
   "^xinpeng,.*":
diff --git a/Documentation/devicetree/bindings/watchdog/st,stpmic1-wdt.txt b/Documentation/devicetree/bindings/watchdog/st,stpmic1-wdt.txt
deleted file mode 100644
index 7cc1407..0000000
--- a/Documentation/devicetree/bindings/watchdog/st,stpmic1-wdt.txt
+++ /dev/null
@@ -1,11 +0,0 @@
-STMicroelectronics STPMIC1 Watchdog
-
-Required properties:
-
-- compatible : should be "st,stpmic1-wdt"
-
-Example:
-
-watchdog {
-	compatible = "st,stpmic1-wdt";
-};
diff --git a/Documentation/devicetree/bindings/watchdog/ti,rti-wdt.yaml b/Documentation/devicetree/bindings/watchdog/ti,rti-wdt.yaml
new file mode 100644
index 0000000..e83026f
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/ti,rti-wdt.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/ti,rti-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 SoC Watchdog Timer
+
+maintainers:
+  - Tero Kristo <t-kristo@ti.com>
+
+description:
+  The TI K3 SoC watchdog timer is implemented via the RTI (Real Time
+  Interrupt) IP module. This timer adds a support for windowed watchdog
+  mode, which will signal an error if it is pinged outside the watchdog
+  time window, meaning either too early or too late. The error signal
+  generated can be routed to either interrupt a safety controller or
+  to directly reset the SoC.
+
+allOf:
+  - $ref: "watchdog.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - ti,j7-rti-wdt
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  assigned-clocks:
+    maxItems: 1
+
+  assigned-clocks-parents:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - power-domains
+
+examples:
+  - |
+    /*
+     * RTI WDT in main domain on J721e SoC. Assigned clocks are used to
+     * select the source clock for the watchdog, forcing it to tick with
+     * a 32kHz clock in this case.
+     */
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    watchdog0: rti@2200000 {
+        compatible = "ti,rti-wdt";
+        reg = <0x0 0x2200000 0x0 0x100>;
+        clocks = <&k3_clks 252 1>;
+        power-domains = <&k3_pds 252 TI_SCI_PD_EXCLUSIVE>;
+        assigned-clocks = <&k3_clks 252 1>;
+        assigned-clock-parents = <&k3_clks 252 5>;
+    };
diff --git a/Documentation/driver-api/gpio/driver.rst b/Documentation/driver-api/gpio/driver.rst
index 8719225..9809f59 100644
--- a/Documentation/driver-api/gpio/driver.rst
+++ b/Documentation/driver-api/gpio/driver.rst
@@ -416,7 +416,7 @@
 struct gpio_irq_chip inside struct gpio_chip before adding the gpio_chip.
 If you do this, the additional irq_chip will be set up by gpiolib at the
 same time as setting up the rest of the GPIO functionality. The following
-is a typical example of a cascaded interrupt handler using gpio_irq_chip::
+is a typical example of a cascaded interrupt handler using gpio_irq_chip:
 
 .. code-block:: c
 
@@ -453,7 +453,7 @@
   return devm_gpiochip_add_data(dev, &g->gc, g);
 
 The helper support using hierarchical interrupt controllers as well.
-In this case the typical set-up will look like this::
+In this case the typical set-up will look like this:
 
 .. code-block:: c
 
diff --git a/Documentation/driver-api/libata.rst b/Documentation/driver-api/libata.rst
index 207f0d2..e2f87b8 100644
--- a/Documentation/driver-api/libata.rst
+++ b/Documentation/driver-api/libata.rst
@@ -401,7 +401,7 @@
 ==============
 
 This chapter describes how errors are handled under libata. Readers are
-advised to read SCSI EH (Documentation/scsi/scsi_eh.txt) and ATA
+advised to read SCSI EH (Documentation/scsi/scsi_eh.rst) and ATA
 exceptions doc first.
 
 Origins of commands
diff --git a/Documentation/driver-api/soundwire/stream.rst b/Documentation/driver-api/soundwire/stream.rst
index 5351bd2..8bceece 100644
--- a/Documentation/driver-api/soundwire/stream.rst
+++ b/Documentation/driver-api/soundwire/stream.rst
@@ -156,22 +156,27 @@
 	+-----------+     +------------+     +----------+     +----------+
 	| ALLOCATED +---->| CONFIGURED +---->| PREPARED +---->| ENABLED  |
 	|   STATE   |     |    STATE   |     |  STATE   |     |  STATE   |
-	+-----------+     +------------+     +----------+     +----+-----+
-	                                                           ^
-	                                                           |
-	                                                           |
-	                                                           v
-	         +----------+           +------------+        +----+-----+
+	+-----------+     +------------+     +---+--+---+     +----+-----+
+	                                         ^  ^              ^
+				                 |  |              |
+				               __|  |___________   |
+				              |                 |  |
+	                                      v                 |  v
+	         +----------+           +-----+------+        +-+--+-----+
 	         | RELEASED |<----------+ DEPREPARED |<-------+ DISABLED |
 	         |  STATE   |           |   STATE    |        |  STATE   |
 	         +----------+           +------------+        +----------+
 
-NOTE: State transition between prepare and deprepare is supported in Spec
-but not in the software (subsystem)
+NOTE: State transitions between ``SDW_STREAM_ENABLED`` and
+``SDW_STREAM_DISABLED`` are only relevant when then INFO_PAUSE flag is
+supported at the ALSA/ASoC level. Likewise the transition between
+``SDW_DISABLED_STATE`` and ``SDW_PREPARED_STATE`` depends on the
+INFO_RESUME flag.
 
-NOTE2: Stream state transition checks need to be handled by caller
-framework, for example ALSA/ASoC. No checks for stream transition exist in
-SoundWire subsystem.
+NOTE2: The framework implements basic state transition checks, but
+does not e.g. check if a transition from DISABLED to ENABLED is valid
+on a specific platform. Such tests need to be added at the ALSA/ASoC
+level.
 
 Stream State Operations
 -----------------------
@@ -246,6 +251,9 @@
 
 Prepare state of stream. Operations performed before entering in this state:
 
+  (0) Steps 1 and 2 are omitted in the case of a resume operation,
+      where the bus bandwidth is known.
+
   (1) Bus parameters such as bandwidth, frame shape, clock frequency,
       are computed based on current stream as well as already active
       stream(s) on Bus. Re-computation is required to accommodate current
@@ -270,9 +278,11 @@
 After all above operations are successful, stream state is set to
 ``SDW_STREAM_PREPARED``.
 
-Bus implements below API for PREPARE state which needs to be called once per
-stream. From ASoC DPCM framework, this stream state is linked to
-.prepare() operation.
+Bus implements below API for PREPARE state which needs to be called
+once per stream. From ASoC DPCM framework, this stream state is linked
+to .prepare() operation. Since the .trigger() operations may not
+follow the .prepare(), a direct transition from
+``SDW_STREAM_PREPARED`` to ``SDW_STREAM_DEPREPARED`` is allowed.
 
 .. code-block:: c
 
@@ -332,6 +342,14 @@
 per stream. From ASoC DPCM framework, this stream state is linked to
 .trigger() stop operation.
 
+When the INFO_PAUSE flag is supported, a direct transition to
+``SDW_STREAM_ENABLED`` is allowed.
+
+For resume operations where ASoC will use the .prepare() callback, the
+stream can transition from ``SDW_STREAM_DISABLED`` to
+``SDW_STREAM_PREPARED``, with all required settings restored but
+without updating the bandwidth and bit allocation.
+
 .. code-block:: c
 
   int sdw_disable_stream(struct sdw_stream_runtime * stream);
@@ -353,9 +371,18 @@
 After all above operations are successful, stream state is set to
 ``SDW_STREAM_DEPREPARED``.
 
-Bus implements below API for DEPREPARED state which needs to be called once
-per stream. From ASoC DPCM framework, this stream state is linked to
-.trigger() stop operation.
+Bus implements below API for DEPREPARED state which needs to be called
+once per stream. ALSA/ASoC do not have a concept of 'deprepare', and
+the mapping from this stream state to ALSA/ASoC operation may be
+implementation specific.
+
+When the INFO_PAUSE flag is supported, the stream state is linked to
+the .hw_free() operation - the stream is not deprepared on a
+TRIGGER_STOP.
+
+Other implementations may transition to the ``SDW_STREAM_DEPREPARED``
+state on TRIGGER_STOP, should they require a transition through the
+``SDW_STREAM_PREPARED`` state.
 
 .. code-block:: c
 
diff --git a/Documentation/driver-api/thermal/cpu-idle-cooling.rst b/Documentation/driver-api/thermal/cpu-idle-cooling.rst
index 9f0016e..a1c3ede 100644
--- a/Documentation/driver-api/thermal/cpu-idle-cooling.rst
+++ b/Documentation/driver-api/thermal/cpu-idle-cooling.rst
@@ -105,8 +105,8 @@
        idle  <-------------->
                 running
 
-      <----------------------------->
-              duty cycle 33%
+      <--------------------->
+          duty cycle 33%
 
 
      ^
diff --git a/Documentation/driver-api/usb/writing_usb_driver.rst b/Documentation/driver-api/usb/writing_usb_driver.rst
index 4fe1c06..0b3d9ff 100644
--- a/Documentation/driver-api/usb/writing_usb_driver.rst
+++ b/Documentation/driver-api/usb/writing_usb_driver.rst
@@ -314,11 +314,8 @@
 Linux Hotplug Project:
 http://linux-hotplug.sourceforge.net/
 
-Linux USB Working Devices List:
-http://www.qbik.ch/usb/devices/
-
-linux-usb-devel Mailing List Archives:
-http://marc.theaimsgroup.com/?l=linux-usb-devel
+linux-usb Mailing List Archives:
+https://lore.kernel.org/linux-usb/
 
 Programming Guide for Linux USB Device Drivers:
 http://lmu.web.psi.ch/docu/manuals/software_manuals/linux_sl/usb_linux_programming_guide.pdf
diff --git a/Documentation/driver-api/w1.rst b/Documentation/driver-api/w1.rst
index 9963cca..bda3ad6 100644
--- a/Documentation/driver-api/w1.rst
+++ b/Documentation/driver-api/w1.rst
@@ -7,9 +7,6 @@
 W1 API internal to the kernel
 =============================
 
-W1 API internal to the kernel
------------------------------
-
 include/linux/w1.h
 ~~~~~~~~~~~~~~~~~~
 
diff --git a/Documentation/filesystems/9p.rst b/Documentation/filesystems/9p.rst
index f054d1c..671fef3 100644
--- a/Documentation/filesystems/9p.rst
+++ b/Documentation/filesystems/9p.rst
@@ -158,6 +158,16 @@
 		/sys/fs/9p/caches. (applies only to cache=fscache)
   ============= ===============================================================
 
+Behavior
+========
+
+This section aims at describing 9p 'quirks' that can be different
+from a local filesystem behaviors.
+
+ - Setting O_NONBLOCK on a file will make client reads return as early
+   as the server returns some data instead of trying to fill the read
+   buffer with the requested amount of bytes or end of file is reached.
+
 Resources
 =========
 
diff --git a/Documentation/filesystems/ceph.rst b/Documentation/filesystems/ceph.rst
index b46a721..0aa7075 100644
--- a/Documentation/filesystems/ceph.rst
+++ b/Documentation/filesystems/ceph.rst
@@ -107,17 +107,17 @@
 	address its connection to the monitor originates from.
 
   wsize=X
-	Specify the maximum write size in bytes.  Default: 16 MB.
+	Specify the maximum write size in bytes.  Default: 64 MB.
 
   rsize=X
-	Specify the maximum read size in bytes.  Default: 16 MB.
+	Specify the maximum read size in bytes.  Default: 64 MB.
 
   rasize=X
 	Specify the maximum readahead size in bytes.  Default: 8 MB.
 
   mount_timeout=X
 	Specify the timeout value for mount (in seconds), in the case
-	of a non-responsive Ceph file system.  The default is 30
+	of a non-responsive Ceph file system.  The default is 60
 	seconds.
 
   caps_max=X
diff --git a/Documentation/filesystems/f2fs.rst b/Documentation/filesystems/f2fs.rst
index d681203..87d794b 100644
--- a/Documentation/filesystems/f2fs.rst
+++ b/Documentation/filesystems/f2fs.rst
@@ -243,8 +243,8 @@
                        hide up to all remaining free space. The actual space that
                        would be unusable can be viewed at /sys/fs/f2fs/<disk>/unusable
                        This space is reclaimed once checkpoint=enable.
-compress_algorithm=%s  Control compress algorithm, currently f2fs supports "lzo"
-                       and "lz4" algorithm.
+compress_algorithm=%s  Control compress algorithm, currently f2fs supports "lzo",
+                       "lz4" and "zstd" algorithm.
 compress_log_size=%u   Support configuring compress cluster size, the size will
                        be 4KB * (1 << %u), 16KB is minimum size, also it's
                        default size.
diff --git a/Documentation/filesystems/fiemap.txt b/Documentation/filesystems/fiemap.txt
index f6d9c99..ac87e6f 100644
--- a/Documentation/filesystems/fiemap.txt
+++ b/Documentation/filesystems/fiemap.txt
@@ -115,8 +115,10 @@
 FIEMAP_EXTENT_NOT_ALIGNED to appear alone.
 
 * FIEMAP_EXTENT_LAST
-This is the last extent in the file. A mapping attempt past this
-extent will return nothing.
+This is generally the last extent in the file. A mapping attempt past
+this extent may return nothing. Some implementations set this flag to
+indicate this extent is the last one in the range queried by the user
+(via fiemap->fm_length).
 
 * FIEMAP_EXTENT_UNKNOWN
 The location of this extent is currently unknown. This may indicate
diff --git a/Documentation/filesystems/orangefs.rst b/Documentation/filesystems/orangefs.rst
index 7d6d4ca..e413697 100644
--- a/Documentation/filesystems/orangefs.rst
+++ b/Documentation/filesystems/orangefs.rst
@@ -41,16 +41,6 @@
 
 http://www.orangefs.org/documentation/
 
-
-Userspace Filesystem Source
-===========================
-
-http://www.orangefs.org/download
-
-Orangefs versions prior to 2.9.3 would not be compatible with the
-upstream version of the kernel client.
-
-
 Running ORANGEFS On a Single Server
 ===================================
 
@@ -94,6 +84,14 @@
 
     mount -t pvfs2 tcp://localhost:3334/orangefs /pvfsmnt
 
+Userspace Filesystem Source
+===========================
+
+http://www.orangefs.org/download
+
+Orangefs versions prior to 2.9.3 would not be compatible with the
+upstream version of the kernel client.
+
 
 Building ORANGEFS on a Single Server
 ====================================
@@ -107,18 +105,24 @@
 
 ::
 
-    ./configure --prefix=/opt/ofs --with-db-backend=lmdb
+    ./configure --prefix=/opt/ofs --with-db-backend=lmdb --disable-usrint
 
     make
 
     make install
 
-Create an orangefs config file::
+Create an orangefs config file by running pvfs2-genconfig and
+specifying a target config file. Pvfs2-genconfig will prompt you
+through. Generally it works fine to take the defaults, but you
+should use your server's hostname, rather than "localhost" when
+it comes to that question::
 
     /opt/ofs/bin/pvfs2-genconfig /etc/pvfs2.conf
 
 Create an /etc/pvfs2tab file::
 
+Localhost is fine for your pvfs2tab file:
+
     echo tcp://localhost:3334/orangefs /pvfsmnt pvfs2 defaults,noauto 0 0 > \
 	/etc/pvfs2tab
 
@@ -132,7 +136,7 @@
 
 Start the server::
 
-    /opt/osf/sbin/pvfs2-server /etc/pvfs2.conf
+    /opt/ofs/sbin/pvfs2-server /etc/pvfs2.conf
 
 Now the server should be running. Pvfs2-ls is a simple
 test to verify that the server is running::
@@ -142,11 +146,11 @@
 If stuff seems to be working, load the kernel module and
 turn on the client core::
 
-    /opt/ofs/sbin/pvfs2-client -p /opt/osf/sbin/pvfs2-client-core
+    /opt/ofs/sbin/pvfs2-client -p /opt/ofs/sbin/pvfs2-client-core
 
 Mount your filesystem::
 
-    mount -t pvfs2 tcp://localhost:3334/orangefs /pvfsmnt
+    mount -t pvfs2 tcp://`hostname`:3334/orangefs /pvfsmnt
 
 
 Running xfstests
diff --git a/Documentation/filesystems/overlayfs.rst b/Documentation/filesystems/overlayfs.rst
index e443be7..c9d2bf9 100644
--- a/Documentation/filesystems/overlayfs.rst
+++ b/Documentation/filesystems/overlayfs.rst
@@ -40,13 +40,46 @@
 underlying filesystem, the same compliant behavior could be achieved
 with the "xino" feature.  The "xino" feature composes a unique object
 identifier from the real object st_ino and an underlying fsid index.
+
 If all underlying filesystems support NFS file handles and export file
 handles with 32bit inode number encoding (e.g. ext4), overlay filesystem
 will use the high inode number bits for fsid.  Even when the underlying
 filesystem uses 64bit inode numbers, users can still enable the "xino"
 feature with the "-o xino=on" overlay mount option.  That is useful for the
 case of underlying filesystems like xfs and tmpfs, which use 64bit inode
-numbers, but are very unlikely to use the high inode number bit.
+numbers, but are very unlikely to use the high inode number bits.  In case
+the underlying inode number does overflow into the high xino bits, overlay
+filesystem will fall back to the non xino behavior for that inode.
+
+The following table summarizes what can be expected in different overlay
+configurations.
+
+Inode properties
+````````````````
+
++--------------+------------+------------+-----------------+----------------+
+|Configuration | Persistent | Uniform    | st_ino == d_ino | d_ino == i_ino |
+|              | st_ino     | st_dev     |                 | [*]            |
++==============+=====+======+=====+======+========+========+========+=======+
+|              | dir | !dir | dir | !dir |  dir   +  !dir  |  dir   | !dir  |
++--------------+-----+------+-----+------+--------+--------+--------+-------+
+| All layers   |  Y  |  Y   |  Y  |  Y   |  Y     |   Y    |  Y     |  Y    |
+| on same fs   |     |      |     |      |        |        |        |       |
++--------------+-----+------+-----+------+--------+--------+--------+-------+
+| Layers not   |  N  |  Y   |  Y  |  N   |  N     |   Y    |  N     |  Y    |
+| on same fs,  |     |      |     |      |        |        |        |       |
+| xino=off     |     |      |     |      |        |        |        |       |
++--------------+-----+------+-----+------+--------+--------+--------+-------+
+| xino=on/auto |  Y  |  Y   |  Y  |  Y   |  Y     |   Y    |  Y     |  Y    |
+|              |     |      |     |      |        |        |        |       |
++--------------+-----+------+-----+------+--------+--------+--------+-------+
+| xino=on/auto,|  N  |  Y   |  Y  |  N   |  N     |   Y    |  N     |  Y    |
+| ino overflow |     |      |     |      |        |        |        |       |
++--------------+-----+------+-----+------+--------+--------+--------+-------+
+
+[*] nfsd v3 readdirplus verifies d_ino == i_ino. i_ino is exposed via several
+/proc files, such as /proc/locks and /proc/self/fdinfo/<fd> of an inotify
+file descriptor.
 
 
 Upper and Lower
@@ -248,6 +281,50 @@
 rename or unlink will of course be noticed and handled).
 
 
+Permission model
+----------------
+
+Permission checking in the overlay filesystem follows these principles:
+
+ 1) permission check SHOULD return the same result before and after copy up
+
+ 2) task creating the overlay mount MUST NOT gain additional privileges
+
+ 3) non-mounting task MAY gain additional privileges through the overlay,
+ compared to direct access on underlying lower or upper filesystems
+
+This is achieved by performing two permission checks on each access
+
+ a) check if current task is allowed access based on local DAC (owner,
+    group, mode and posix acl), as well as MAC checks
+
+ b) check if mounting task would be allowed real operation on lower or
+    upper layer based on underlying filesystem permissions, again including
+    MAC checks
+
+Check (a) ensures consistency (1) since owner, group, mode and posix acls
+are copied up.  On the other hand it can result in server enforced
+permissions (used by NFS, for example) being ignored (3).
+
+Check (b) ensures that no task gains permissions to underlying layers that
+the mounting task does not have (2).  This also means that it is possible
+to create setups where the consistency rule (1) does not hold; normally,
+however, the mounting task will have sufficient privileges to perform all
+operations.
+
+Another way to demonstrate this model is drawing parallels between
+
+  mount -t overlay overlay -olowerdir=/lower,upperdir=/upper,... /merged
+
+and
+
+  cp -a /lower /upper
+  mount --bind /upper /merged
+
+The resulting access permissions should be the same.  The difference is in
+the time of copy (on-demand vs. up-front).
+
+
 Multiple lower layers
 ---------------------
 
@@ -383,7 +460,8 @@
 value of d_ino returned by readdir(3) will act like on a normal filesystem.
 E.g. the value of st_dev may be different for two objects in the same
 overlay filesystem and the value of st_ino for directory objects may not be
-persistent and could change even while the overlay filesystem is mounted.
+persistent and could change even while the overlay filesystem is mounted, as
+summarized in the `Inode properties`_ table above.
 
 
 Changes to underlying filesystems
diff --git a/Documentation/filesystems/qnx6.rst b/Documentation/filesystems/qnx6.rst
index b713083..fd13433 100644
--- a/Documentation/filesystems/qnx6.rst
+++ b/Documentation/filesystems/qnx6.rst
@@ -185,7 +185,7 @@
 
 The rational behind that is that a write request can work on a new snapshot
 (system area of the inactive - resp. lower serial numbered superblock) while
-at the same time there is still a complete stable filesystem structer in the
+at the same time there is still a complete stable filesystem structure in the
 other half of the system area.
 
 When finished with writing (a sync write is completed, the maximum sync leap
diff --git a/Documentation/firmware-guide/acpi/namespace.rst b/Documentation/firmware-guide/acpi/namespace.rst
index 3eb763d6..6193582 100644
--- a/Documentation/firmware-guide/acpi/namespace.rst
+++ b/Documentation/firmware-guide/acpi/namespace.rst
@@ -56,13 +56,13 @@
                   +- - - -+                  |  +-------------------| |
                   | Entry | - - - - - - - -+ |  | Definition Blocks | |
                   +- - - -+                | |  +-------------------+ |
-                                          | |  +- - - - - - - - - -+ |
-                                          +-|->|       SSDT        | |
+                                           | |  +- - - - - - - - - -+ |
+                                           +-|->|       SSDT        | |
                                              |  +-------------------+ |
                                              |  | Definition Blocks | |
                                              |  +- - - - - - - - - -+ |
                                              +------------------------+
-                                                         |
+                                                          |
                                              OSPM Loading |
                                                          \|/
                                                    +----------------+
diff --git a/Documentation/hwmon/isl68137.rst b/Documentation/hwmon/isl68137.rst
index cc4b614..0e71b22 100644
--- a/Documentation/hwmon/isl68137.rst
+++ b/Documentation/hwmon/isl68137.rst
@@ -16,7 +16,7 @@
 
   * Renesas ISL68220
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl68220'
 
     Addresses scanned: -
 
@@ -26,7 +26,7 @@
 
   * Renesas ISL68221
 
-    Prefix: 'raa_dmpvr2_3rail'
+    Prefix: 'isl68221'
 
     Addresses scanned: -
 
@@ -36,7 +36,7 @@
 
   * Renesas ISL68222
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl68222'
 
     Addresses scanned: -
 
@@ -46,7 +46,7 @@
 
   * Renesas ISL68223
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl68223'
 
     Addresses scanned: -
 
@@ -56,7 +56,7 @@
 
   * Renesas ISL68224
 
-    Prefix: 'raa_dmpvr2_3rail'
+    Prefix: 'isl68224'
 
     Addresses scanned: -
 
@@ -66,7 +66,7 @@
 
   * Renesas ISL68225
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl68225'
 
     Addresses scanned: -
 
@@ -76,7 +76,7 @@
 
   * Renesas ISL68226
 
-    Prefix: 'raa_dmpvr2_3rail'
+    Prefix: 'isl68226'
 
     Addresses scanned: -
 
@@ -86,7 +86,7 @@
 
   * Renesas ISL68227
 
-    Prefix: 'raa_dmpvr2_1rail'
+    Prefix: 'isl68227'
 
     Addresses scanned: -
 
@@ -96,7 +96,7 @@
 
   * Renesas ISL68229
 
-    Prefix: 'raa_dmpvr2_3rail'
+    Prefix: 'isl68229'
 
     Addresses scanned: -
 
@@ -106,7 +106,7 @@
 
   * Renesas ISL68233
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl68233'
 
     Addresses scanned: -
 
@@ -116,7 +116,7 @@
 
   * Renesas ISL68239
 
-    Prefix: 'raa_dmpvr2_3rail'
+    Prefix: 'isl68239'
 
     Addresses scanned: -
 
@@ -126,7 +126,7 @@
 
   * Renesas ISL69222
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69222'
 
     Addresses scanned: -
 
@@ -136,7 +136,7 @@
 
   * Renesas ISL69223
 
-    Prefix: 'raa_dmpvr2_3rail'
+    Prefix: 'isl69223'
 
     Addresses scanned: -
 
@@ -146,7 +146,7 @@
 
   * Renesas ISL69224
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69224'
 
     Addresses scanned: -
 
@@ -156,7 +156,7 @@
 
   * Renesas ISL69225
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69225'
 
     Addresses scanned: -
 
@@ -166,7 +166,7 @@
 
   * Renesas ISL69227
 
-    Prefix: 'raa_dmpvr2_3rail'
+    Prefix: 'isl69227'
 
     Addresses scanned: -
 
@@ -176,7 +176,7 @@
 
   * Renesas ISL69228
 
-    Prefix: 'raa_dmpvr2_3rail'
+    Prefix: 'isl69228'
 
     Addresses scanned: -
 
@@ -186,7 +186,7 @@
 
   * Renesas ISL69234
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69234'
 
     Addresses scanned: -
 
@@ -196,7 +196,7 @@
 
   * Renesas ISL69236
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69236'
 
     Addresses scanned: -
 
@@ -206,7 +206,7 @@
 
   * Renesas ISL69239
 
-    Prefix: 'raa_dmpvr2_3rail'
+    Prefix: 'isl69239'
 
     Addresses scanned: -
 
@@ -216,7 +216,7 @@
 
   * Renesas ISL69242
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69242'
 
     Addresses scanned: -
 
@@ -226,7 +226,7 @@
 
   * Renesas ISL69243
 
-    Prefix: 'raa_dmpvr2_1rail'
+    Prefix: 'isl69243'
 
     Addresses scanned: -
 
@@ -236,7 +236,7 @@
 
   * Renesas ISL69247
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69247'
 
     Addresses scanned: -
 
@@ -246,7 +246,7 @@
 
   * Renesas ISL69248
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69248'
 
     Addresses scanned: -
 
@@ -256,7 +256,7 @@
 
   * Renesas ISL69254
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69254'
 
     Addresses scanned: -
 
@@ -266,7 +266,7 @@
 
   * Renesas ISL69255
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69255'
 
     Addresses scanned: -
 
@@ -276,7 +276,7 @@
 
   * Renesas ISL69256
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69256'
 
     Addresses scanned: -
 
@@ -286,7 +286,7 @@
 
   * Renesas ISL69259
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69259'
 
     Addresses scanned: -
 
@@ -296,7 +296,7 @@
 
   * Renesas ISL69260
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69260'
 
     Addresses scanned: -
 
@@ -306,7 +306,7 @@
 
   * Renesas ISL69268
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69268'
 
     Addresses scanned: -
 
@@ -316,7 +316,7 @@
 
   * Renesas ISL69269
 
-    Prefix: 'raa_dmpvr2_3rail'
+    Prefix: 'isl69269'
 
     Addresses scanned: -
 
@@ -326,7 +326,7 @@
 
   * Renesas ISL69298
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69298'
 
     Addresses scanned: -
 
@@ -336,7 +336,7 @@
 
   * Renesas RAA228000
 
-    Prefix: 'raa_dmpvr2_hv'
+    Prefix: 'raa228000'
 
     Addresses scanned: -
 
@@ -346,7 +346,7 @@
 
   * Renesas RAA228004
 
-    Prefix: 'raa_dmpvr2_hv'
+    Prefix: 'raa228004'
 
     Addresses scanned: -
 
@@ -356,7 +356,7 @@
 
   * Renesas RAA228006
 
-    Prefix: 'raa_dmpvr2_hv'
+    Prefix: 'raa228006'
 
     Addresses scanned: -
 
@@ -366,7 +366,7 @@
 
   * Renesas RAA228228
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'raa228228'
 
     Addresses scanned: -
 
@@ -376,7 +376,7 @@
 
   * Renesas RAA229001
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'raa229001'
 
     Addresses scanned: -
 
@@ -386,7 +386,7 @@
 
   * Renesas RAA229004
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'raa229004'
 
     Addresses scanned: -
 
diff --git a/Documentation/i2c/smbus-protocol.rst b/Documentation/i2c/smbus-protocol.rst
index c122ed2..c2e2963 100644
--- a/Documentation/i2c/smbus-protocol.rst
+++ b/Documentation/i2c/smbus-protocol.rst
@@ -274,7 +274,7 @@
 This is implemented the following way in the Linux kernel:
 
 * I2C bus drivers which support SMBus alert should call
-  i2c_setup_smbus_alert() to setup SMBus alert support.
+  i2c_new_smbus_alert_device() to install SMBus alert support.
 * I2C drivers for devices which can trigger SMBus alerts should implement
   the optional alert() callback.
 
diff --git a/Documentation/index.rst b/Documentation/index.rst
index 9df95ba..9599c0f 100644
--- a/Documentation/index.rst
+++ b/Documentation/index.rst
@@ -131,8 +131,10 @@
    bpf/index
    usb/index
    PCI/index
+   scsi/index
    misc-devices/index
    scheduler/index
+   mhi/index
 
 Architecture-agnostic documentation
 -----------------------------------
diff --git a/Documentation/kbuild/kbuild.rst b/Documentation/kbuild/kbuild.rst
index 510f38d..2d1fc03 100644
--- a/Documentation/kbuild/kbuild.rst
+++ b/Documentation/kbuild/kbuild.rst
@@ -262,3 +262,8 @@
 These two variables allow to override the user@host string displayed during
 boot and in /proc/version. The default value is the output of the commands
 whoami and host, respectively.
+
+LLVM
+----
+If this variable is set to 1, Kbuild will use Clang and LLVM utilities instead
+of GCC and GNU binutils to build the kernel.
diff --git a/Documentation/kbuild/llvm.rst b/Documentation/kbuild/llvm.rst
index d6c79eb..c776b6e 100644
--- a/Documentation/kbuild/llvm.rst
+++ b/Documentation/kbuild/llvm.rst
@@ -47,14 +47,21 @@
 LLVM Utilities
 --------------
 
-LLVM has substitutes for GNU binutils utilities. These can be invoked as
-additional parameters to `make`.
+LLVM has substitutes for GNU binutils utilities. Kbuild supports `LLVM=1`
+to enable them.
 
-	make CC=clang AS=clang LD=ld.lld AR=llvm-ar NM=llvm-nm STRIP=llvm-strip \\
-	  OBJCOPY=llvm-objcopy OBJDUMP=llvm-objdump OBJSIZE=llvm-objsize \\
+	make LLVM=1
+
+They can be enabled individually. The full list of the parameters:
+
+	make CC=clang LD=ld.lld AR=llvm-ar NM=llvm-nm STRIP=llvm-strip \\
+	  OBJCOPY=llvm-objcopy OBJDUMP=llvm-objdump OBJSIZE=llvm-size \\
 	  READELF=llvm-readelf HOSTCC=clang HOSTCXX=clang++ HOSTAR=llvm-ar \\
 	  HOSTLD=ld.lld
 
+Currently, the integrated assembler is disabled by default. You can pass
+`LLVM_IAS=1` to enable it.
+
 Getting Help
 ------------
 
diff --git a/Documentation/mhi/index.rst b/Documentation/mhi/index.rst
new file mode 100644
index 0000000..1d8dec3
--- /dev/null
+++ b/Documentation/mhi/index.rst
@@ -0,0 +1,18 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===
+MHI
+===
+
+.. toctree::
+   :maxdepth: 1
+
+   mhi
+   topology
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/mhi/mhi.rst b/Documentation/mhi/mhi.rst
new file mode 100644
index 0000000..803ff84
--- /dev/null
+++ b/Documentation/mhi/mhi.rst
@@ -0,0 +1,218 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==========================
+MHI (Modem Host Interface)
+==========================
+
+This document provides information about the MHI protocol.
+
+Overview
+========
+
+MHI is a protocol developed by Qualcomm Innovation Center, Inc. It is used
+by the host processors to control and communicate with modem devices over high
+speed peripheral buses or shared memory. Even though MHI can be easily adapted
+to any peripheral buses, it is primarily used with PCIe based devices. MHI
+provides logical channels over the physical buses and allows transporting the
+modem protocols, such as IP data packets, modem control messages, and
+diagnostics over at least one of those logical channels. Also, the MHI
+protocol provides data acknowledgment feature and manages the power state of the
+modems via one or more logical channels.
+
+MHI Internals
+=============
+
+MMIO
+----
+
+MMIO (Memory mapped IO) consists of a set of registers in the device hardware,
+which are mapped to the host memory space by the peripheral buses like PCIe.
+Following are the major components of MMIO register space:
+
+MHI control registers: Access to MHI configurations registers
+
+MHI BHI registers: BHI (Boot Host Interface) registers are used by the host
+for downloading the firmware to the device before MHI initialization.
+
+Channel Doorbell array: Channel Doorbell (DB) registers used by the host to
+notify the device when there is new work to do.
+
+Event Doorbell array: Associated with event context array, the Event Doorbell
+(DB) registers are used by the host to notify the device when new events are
+available.
+
+Debug registers: A set of registers and counters used by the device to expose
+debugging information like performance, functional, and stability to the host.
+
+Data structures
+---------------
+
+All data structures used by MHI are in the host system memory. Using the
+physical interface, the device accesses those data structures. MHI data
+structures and data buffers in the host system memory regions are mapped for
+the device.
+
+Channel context array: All channel configurations are organized in channel
+context data array.
+
+Transfer rings: Used by the host to schedule work items for a channel. The
+transfer rings are organized as a circular queue of Transfer Descriptors (TD).
+
+Event context array: All event configurations are organized in the event context
+data array.
+
+Event rings: Used by the device to send completion and state transition messages
+to the host
+
+Command context array: All command configurations are organized in command
+context data array.
+
+Command rings: Used by the host to send MHI commands to the device. The command
+rings are organized as a circular queue of Command Descriptors (CD).
+
+Channels
+--------
+
+MHI channels are logical, unidirectional data pipes between a host and a device.
+The concept of channels in MHI is similar to endpoints in USB. MHI supports up
+to 256 channels. However, specific device implementations may support less than
+the maximum number of channels allowed.
+
+Two unidirectional channels with their associated transfer rings form a
+bidirectional data pipe, which can be used by the upper-layer protocols to
+transport application data packets (such as IP packets, modem control messages,
+diagnostics messages, and so on). Each channel is associated with a single
+transfer ring.
+
+Transfer rings
+--------------
+
+Transfers between the host and device are organized by channels and defined by
+Transfer Descriptors (TD). TDs are managed through transfer rings, which are
+defined for each channel between the device and host and reside in the host
+memory. TDs consist of one or more ring elements (or transfer blocks)::
+
+        [Read Pointer (RP)] ----------->[Ring Element] } TD
+        [Write Pointer (WP)]-           [Ring Element]
+                             -          [Ring Element]
+                              --------->[Ring Element]
+                                        [Ring Element]
+
+Below is the basic usage of transfer rings:
+
+* Host allocates memory for transfer ring.
+* Host sets the base pointer, read pointer, and write pointer in corresponding
+  channel context.
+* Ring is considered empty when RP == WP.
+* Ring is considered full when WP + 1 == RP.
+* RP indicates the next element to be serviced by the device.
+* When the host has a new buffer to send, it updates the ring element with
+  buffer information, increments the WP to the next element and rings the
+  associated channel DB.
+
+Event rings
+-----------
+
+Events from the device to host are organized in event rings and defined by Event
+Descriptors (ED). Event rings are used by the device to report events such as
+data transfer completion status, command completion status, and state changes
+to the host. Event rings are the array of EDs that resides in the host
+memory. EDs consist of one or more ring elements (or transfer blocks)::
+
+        [Read Pointer (RP)] ----------->[Ring Element] } ED
+        [Write Pointer (WP)]-           [Ring Element]
+                             -          [Ring Element]
+                              --------->[Ring Element]
+                                        [Ring Element]
+
+Below is the basic usage of event rings:
+
+* Host allocates memory for event ring.
+* Host sets the base pointer, read pointer, and write pointer in corresponding
+  channel context.
+* Both host and device has a local copy of RP, WP.
+* Ring is considered empty (no events to service) when WP + 1 == RP.
+* Ring is considered full of events when RP == WP.
+* When there is a new event the device needs to send, the device updates ED
+  pointed by RP, increments the RP to the next element and triggers the
+  interrupt.
+
+Ring Element
+------------
+
+A Ring Element is a data structure used to transfer a single block
+of data between the host and the device. Transfer ring element types contain a
+single buffer pointer, the size of the buffer, and additional control
+information. Other ring element types may only contain control and status
+information. For single buffer operations, a ring descriptor is composed of a
+single element. For large multi-buffer operations (such as scatter and gather),
+elements can be chained to form a longer descriptor.
+
+MHI Operations
+==============
+
+MHI States
+----------
+
+MHI_STATE_RESET
+~~~~~~~~~~~~~~~
+MHI is in reset state after power-up or hardware reset. The host is not allowed
+to access device MMIO register space.
+
+MHI_STATE_READY
+~~~~~~~~~~~~~~~
+MHI is ready for initialization. The host can start MHI initialization by
+programming MMIO registers.
+
+MHI_STATE_M0
+~~~~~~~~~~~~
+MHI is running and operational in the device. The host can start channels by
+issuing channel start command.
+
+MHI_STATE_M1
+~~~~~~~~~~~~
+MHI operation is suspended by the device. This state is entered when the
+device detects inactivity at the physical interface within a preset time.
+
+MHI_STATE_M2
+~~~~~~~~~~~~
+MHI is in low power state. MHI operation is suspended and the device may
+enter lower power mode.
+
+MHI_STATE_M3
+~~~~~~~~~~~~
+MHI operation stopped by the host. This state is entered when the host suspends
+MHI operation.
+
+MHI Initialization
+------------------
+
+After system boots, the device is enumerated over the physical interface.
+In the case of PCIe, the device is enumerated and assigned BAR-0 for
+the device's MMIO register space. To initialize the MHI in a device,
+the host performs the following operations:
+
+* Allocates the MHI context for event, channel and command arrays.
+* Initializes the context array, and prepares interrupts.
+* Waits until the device enters READY state.
+* Programs MHI MMIO registers and sets device into MHI_M0 state.
+* Waits for the device to enter M0 state.
+
+MHI Data Transfer
+-----------------
+
+MHI data transfer is initiated by the host to transfer data to the device.
+Following are the sequence of operations performed by the host to transfer
+data to device:
+
+* Host prepares TD with buffer information.
+* Host increments the WP of the corresponding channel transfer ring.
+* Host rings the channel DB register.
+* Device wakes up to process the TD.
+* Device generates a completion event for the processed TD by updating ED.
+* Device increments the RP of the corresponding event ring.
+* Device triggers IRQ to wake up the host.
+* Host wakes up and checks the event ring for completion event.
+* Host updates the WP of the corresponding event ring to indicate that the
+  data transfer has been completed successfully.
+
diff --git a/Documentation/mhi/topology.rst b/Documentation/mhi/topology.rst
new file mode 100644
index 0000000..dc7799d
--- /dev/null
+++ b/Documentation/mhi/topology.rst
@@ -0,0 +1,60 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+============
+MHI Topology
+============
+
+This document provides information about the MHI topology modeling and
+representation in the kernel.
+
+MHI Controller
+--------------
+
+MHI controller driver manages the interaction with the MHI client devices
+such as the external modems and WiFi chipsets. It is also the MHI bus master
+which is in charge of managing the physical link between the host and device.
+It is however not involved in the actual data transfer as the data transfer
+is taken care by the physical bus such as PCIe. Each controller driver exposes
+channels and events based on the client device type.
+
+Below are the roles of the MHI controller driver:
+
+* Turns on the physical bus and establishes the link to the device
+* Configures IRQs, IOMMU, and IOMEM
+* Allocates struct mhi_controller and registers with the MHI bus framework
+  with channel and event configurations using mhi_register_controller.
+* Initiates power on and shutdown sequence
+* Initiates suspend and resume power management operations of the device.
+
+MHI Device
+----------
+
+MHI device is the logical device which binds to a maximum of two MHI channels
+for bi-directional communication. Once MHI is in powered on state, the MHI
+core will create MHI devices based on the channel configuration exposed
+by the controller. There can be a single MHI device for each channel or for a
+couple of channels.
+
+Each supported device is enumerated in::
+
+        /sys/bus/mhi/devices/
+
+MHI Driver
+----------
+
+MHI driver is the client driver which binds to one or more MHI devices. The MHI
+driver sends and receives the upper-layer protocol packets like IP packets,
+modem control messages, and diagnostics messages over MHI. The MHI core will
+bind the MHI devices to the MHI driver.
+
+Each supported driver is enumerated in::
+
+        /sys/bus/mhi/drivers/
+
+Below are the roles of the MHI driver:
+
+* Registers the driver with the MHI bus framework using mhi_driver_register.
+* Prepares the device for transfer by calling mhi_prepare_for_transfer.
+* Initiates data transfer by calling mhi_queue_transfer.
+* Once the data transfer is finished, calls mhi_unprepare_from_transfer to
+  end data transfer.
diff --git a/Documentation/networking/devlink/devlink-trap.rst b/Documentation/networking/devlink/devlink-trap.rst
index a09971c..fe089ac 100644
--- a/Documentation/networking/devlink/devlink-trap.rst
+++ b/Documentation/networking/devlink/devlink-trap.rst
@@ -257,6 +257,8 @@
   * :doc:`netdevsim`
   * :doc:`mlxsw`
 
+.. _Generic-Packet-Trap-Groups:
+
 Generic Packet Trap Groups
 ==========================
 
diff --git a/Documentation/networking/index.rst b/Documentation/networking/index.rst
index 50133d9..6538ede 100644
--- a/Documentation/networking/index.rst
+++ b/Documentation/networking/index.rst
@@ -22,6 +22,7 @@
    z8530book
    msg_zerocopy
    failover
+   net_dim
    net_failover
    phy
    sfp-phylink
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index ee961d3..6fcfd31 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -812,7 +812,7 @@
 tcp_challenge_ack_limit - INTEGER
 	Limits number of Challenge ACK sent per second, as recommended
 	in RFC 5961 (Improving TCP's Robustness to Blind In-Window Attacks)
-	Default: 100
+	Default: 1000
 
 tcp_rx_skb_cache - BOOLEAN
 	Controls a per TCP socket cache of one skb, that might help
diff --git a/Documentation/networking/net_dim.rst b/Documentation/networking/net_dim.rst
new file mode 100644
index 0000000..3bed9fd
--- /dev/null
+++ b/Documentation/networking/net_dim.rst
@@ -0,0 +1,176 @@
+======================================================
+Net DIM - Generic Network Dynamic Interrupt Moderation
+======================================================
+
+:Author: Tal Gilboa <talgi@mellanox.com>
+
+.. contents:: :depth: 2
+
+Assumptions
+===========
+
+This document assumes the reader has basic knowledge in network drivers
+and in general interrupt moderation.
+
+
+Introduction
+============
+
+Dynamic Interrupt Moderation (DIM) (in networking) refers to changing the
+interrupt moderation configuration of a channel in order to optimize packet
+processing. The mechanism includes an algorithm which decides if and how to
+change moderation parameters for a channel, usually by performing an analysis on
+runtime data sampled from the system. Net DIM is such a mechanism. In each
+iteration of the algorithm, it analyses a given sample of the data, compares it
+to the previous sample and if required, it can decide to change some of the
+interrupt moderation configuration fields. The data sample is composed of data
+bandwidth, the number of packets and the number of events. The time between
+samples is also measured. Net DIM compares the current and the previous data and
+returns an adjusted interrupt moderation configuration object. In some cases,
+the algorithm might decide not to change anything. The configuration fields are
+the minimum duration (microseconds) allowed between events and the maximum
+number of wanted packets per event. The Net DIM algorithm ascribes importance to
+increase bandwidth over reducing interrupt rate.
+
+
+Net DIM Algorithm
+=================
+
+Each iteration of the Net DIM algorithm follows these steps:
+
+#. Calculates new data sample.
+#. Compares it to previous sample.
+#. Makes a decision - suggests interrupt moderation configuration fields.
+#. Applies a schedule work function, which applies suggested configuration.
+
+The first two steps are straightforward, both the new and the previous data are
+supplied by the driver registered to Net DIM. The previous data is the new data
+supplied to the previous iteration. The comparison step checks the difference
+between the new and previous data and decides on the result of the last step.
+A step would result as "better" if bandwidth increases and as "worse" if
+bandwidth reduces. If there is no change in bandwidth, the packet rate is
+compared in a similar fashion - increase == "better" and decrease == "worse".
+In case there is no change in the packet rate as well, the interrupt rate is
+compared. Here the algorithm tries to optimize for lower interrupt rate so an
+increase in the interrupt rate is considered "worse" and a decrease is
+considered "better". Step #2 has an optimization for avoiding false results: it
+only considers a difference between samples as valid if it is greater than a
+certain percentage. Also, since Net DIM does not measure anything by itself, it
+assumes the data provided by the driver is valid.
+
+Step #3 decides on the suggested configuration based on the result from step #2
+and the internal state of the algorithm. The states reflect the "direction" of
+the algorithm: is it going left (reducing moderation), right (increasing
+moderation) or standing still. Another optimization is that if a decision
+to stay still is made multiple times, the interval between iterations of the
+algorithm would increase in order to reduce calculation overhead. Also, after
+"parking" on one of the most left or most right decisions, the algorithm may
+decide to verify this decision by taking a step in the other direction. This is
+done in order to avoid getting stuck in a "deep sleep" scenario. Once a
+decision is made, an interrupt moderation configuration is selected from
+the predefined profiles.
+
+The last step is to notify the registered driver that it should apply the
+suggested configuration. This is done by scheduling a work function, defined by
+the Net DIM API and provided by the registered driver.
+
+As you can see, Net DIM itself does not actively interact with the system. It
+would have trouble making the correct decisions if the wrong data is supplied to
+it and it would be useless if the work function would not apply the suggested
+configuration. This does, however, allow the registered driver some room for
+manoeuvre as it may provide partial data or ignore the algorithm suggestion
+under some conditions.
+
+
+Registering a Network Device to DIM
+===================================
+
+Net DIM API exposes the main function net_dim().
+This function is the entry point to the Net
+DIM algorithm and has to be called every time the driver would like to check if
+it should change interrupt moderation parameters. The driver should provide two
+data structures: :c:type:`struct dim <dim>` and
+:c:type:`struct dim_sample <dim_sample>`. :c:type:`struct dim <dim>`
+describes the state of DIM for a specific object (RX queue, TX queue,
+other queues, etc.). This includes the current selected profile, previous data
+samples, the callback function provided by the driver and more.
+:c:type:`struct dim_sample <dim_sample>` describes a data sample,
+which will be compared to the data sample stored in :c:type:`struct dim <dim>`
+in order to decide on the algorithm's next
+step. The sample should include bytes, packets and interrupts, measured by
+the driver.
+
+In order to use Net DIM from a networking driver, the driver needs to call the
+main net_dim() function. The recommended method is to call net_dim() on each
+interrupt. Since Net DIM has a built-in moderation and it might decide to skip
+iterations under certain conditions, there is no need to moderate the net_dim()
+calls as well. As mentioned above, the driver needs to provide an object of type
+:c:type:`struct dim <dim>` to the net_dim() function call. It is advised for
+each entity using Net DIM to hold a :c:type:`struct dim <dim>` as part of its
+data structure and use it as the main Net DIM API object.
+The :c:type:`struct dim_sample <dim_sample>` should hold the latest
+bytes, packets and interrupts count. No need to perform any calculations, just
+include the raw data.
+
+The net_dim() call itself does not return anything. Instead Net DIM relies on
+the driver to provide a callback function, which is called when the algorithm
+decides to make a change in the interrupt moderation parameters. This callback
+will be scheduled and run in a separate thread in order not to add overhead to
+the data flow. After the work is done, Net DIM algorithm needs to be set to
+the proper state in order to move to the next iteration.
+
+
+Example
+=======
+
+The following code demonstrates how to register a driver to Net DIM. The actual
+usage is not complete but it should make the outline of the usage clear.
+
+.. code-block:: c
+
+  #include <linux/dim.h>
+
+  /* Callback for net DIM to schedule on a decision to change moderation */
+  void my_driver_do_dim_work(struct work_struct *work)
+  {
+	/* Get struct dim from struct work_struct */
+	struct dim *dim = container_of(work, struct dim,
+				       work);
+	/* Do interrupt moderation related stuff */
+	...
+
+	/* Signal net DIM work is done and it should move to next iteration */
+	dim->state = DIM_START_MEASURE;
+  }
+
+  /* My driver's interrupt handler */
+  int my_driver_handle_interrupt(struct my_driver_entity *my_entity, ...)
+  {
+	...
+	/* A struct to hold current measured data */
+	struct dim_sample dim_sample;
+	...
+	/* Initiate data sample struct with current data */
+	dim_update_sample(my_entity->events,
+		          my_entity->packets,
+		          my_entity->bytes,
+		          &dim_sample);
+	/* Call net DIM */
+	net_dim(&my_entity->dim, dim_sample);
+	...
+  }
+
+  /* My entity's initialization function (my_entity was already allocated) */
+  int my_driver_init_my_entity(struct my_driver_entity *my_entity, ...)
+  {
+	...
+	/* Initiate struct work_struct with my driver's callback function */
+	INIT_WORK(&my_entity->dim.work, my_driver_do_dim_work);
+	...
+  }
+
+Dynamic Interrupt Moderation (DIM) library API
+==============================================
+
+.. kernel-doc:: include/linux/dim.h
+    :internal:
diff --git a/Documentation/networking/net_dim.txt b/Documentation/networking/net_dim.txt
deleted file mode 100644
index 9bdb7d5..0000000
--- a/Documentation/networking/net_dim.txt
+++ /dev/null
@@ -1,174 +0,0 @@
-Net DIM - Generic Network Dynamic Interrupt Moderation
-======================================================
-
-Author:
-	Tal Gilboa <talgi@mellanox.com>
-
-
-Contents
-=========
-
-- Assumptions
-- Introduction
-- The Net DIM Algorithm
-- Registering a Network Device to DIM
-- Example
-
-Part 0: Assumptions
-======================
-
-This document assumes the reader has basic knowledge in network drivers
-and in general interrupt moderation.
-
-
-Part I: Introduction
-======================
-
-Dynamic Interrupt Moderation (DIM) (in networking) refers to changing the
-interrupt moderation configuration of a channel in order to optimize packet
-processing. The mechanism includes an algorithm which decides if and how to
-change moderation parameters for a channel, usually by performing an analysis on
-runtime data sampled from the system. Net DIM is such a mechanism. In each
-iteration of the algorithm, it analyses a given sample of the data, compares it
-to the previous sample and if required, it can decide to change some of the
-interrupt moderation configuration fields. The data sample is composed of data
-bandwidth, the number of packets and the number of events. The time between
-samples is also measured. Net DIM compares the current and the previous data and
-returns an adjusted interrupt moderation configuration object. In some cases,
-the algorithm might decide not to change anything. The configuration fields are
-the minimum duration (microseconds) allowed between events and the maximum
-number of wanted packets per event. The Net DIM algorithm ascribes importance to
-increase bandwidth over reducing interrupt rate.
-
-
-Part II: The Net DIM Algorithm
-===============================
-
-Each iteration of the Net DIM algorithm follows these steps:
-1. Calculates new data sample.
-2. Compares it to previous sample.
-3. Makes a decision - suggests interrupt moderation configuration fields.
-4. Applies a schedule work function, which applies suggested configuration.
-
-The first two steps are straightforward, both the new and the previous data are
-supplied by the driver registered to Net DIM. The previous data is the new data
-supplied to the previous iteration. The comparison step checks the difference
-between the new and previous data and decides on the result of the last step.
-A step would result as "better" if bandwidth increases and as "worse" if
-bandwidth reduces. If there is no change in bandwidth, the packet rate is
-compared in a similar fashion - increase == "better" and decrease == "worse".
-In case there is no change in the packet rate as well, the interrupt rate is
-compared. Here the algorithm tries to optimize for lower interrupt rate so an
-increase in the interrupt rate is considered "worse" and a decrease is
-considered "better". Step #2 has an optimization for avoiding false results: it
-only considers a difference between samples as valid if it is greater than a
-certain percentage. Also, since Net DIM does not measure anything by itself, it
-assumes the data provided by the driver is valid.
-
-Step #3 decides on the suggested configuration based on the result from step #2
-and the internal state of the algorithm. The states reflect the "direction" of
-the algorithm: is it going left (reducing moderation), right (increasing
-moderation) or standing still. Another optimization is that if a decision
-to stay still is made multiple times, the interval between iterations of the
-algorithm would increase in order to reduce calculation overhead. Also, after
-"parking" on one of the most left or most right decisions, the algorithm may
-decide to verify this decision by taking a step in the other direction. This is
-done in order to avoid getting stuck in a "deep sleep" scenario. Once a
-decision is made, an interrupt moderation configuration is selected from
-the predefined profiles.
-
-The last step is to notify the registered driver that it should apply the
-suggested configuration. This is done by scheduling a work function, defined by
-the Net DIM API and provided by the registered driver.
-
-As you can see, Net DIM itself does not actively interact with the system. It
-would have trouble making the correct decisions if the wrong data is supplied to
-it and it would be useless if the work function would not apply the suggested
-configuration. This does, however, allow the registered driver some room for
-manoeuvre as it may provide partial data or ignore the algorithm suggestion
-under some conditions.
-
-
-Part III: Registering a Network Device to DIM
-==============================================
-
-Net DIM API exposes the main function net_dim(struct dim *dim,
-struct dim_sample end_sample). This function is the entry point to the Net
-DIM algorithm and has to be called every time the driver would like to check if
-it should change interrupt moderation parameters. The driver should provide two
-data structures: struct dim and struct dim_sample. Struct dim
-describes the state of DIM for a specific object (RX queue, TX queue,
-other queues, etc.). This includes the current selected profile, previous data
-samples, the callback function provided by the driver and more.
-Struct dim_sample describes a data sample, which will be compared to the
-data sample stored in struct dim in order to decide on the algorithm's next
-step. The sample should include bytes, packets and interrupts, measured by
-the driver.
-
-In order to use Net DIM from a networking driver, the driver needs to call the
-main net_dim() function. The recommended method is to call net_dim() on each
-interrupt. Since Net DIM has a built-in moderation and it might decide to skip
-iterations under certain conditions, there is no need to moderate the net_dim()
-calls as well. As mentioned above, the driver needs to provide an object of type
-struct dim to the net_dim() function call. It is advised for each entity
-using Net DIM to hold a struct dim as part of its data structure and use it
-as the main Net DIM API object. The struct dim_sample should hold the latest
-bytes, packets and interrupts count. No need to perform any calculations, just
-include the raw data.
-
-The net_dim() call itself does not return anything. Instead Net DIM relies on
-the driver to provide a callback function, which is called when the algorithm
-decides to make a change in the interrupt moderation parameters. This callback
-will be scheduled and run in a separate thread in order not to add overhead to
-the data flow. After the work is done, Net DIM algorithm needs to be set to
-the proper state in order to move to the next iteration.
-
-
-Part IV: Example
-=================
-
-The following code demonstrates how to register a driver to Net DIM. The actual
-usage is not complete but it should make the outline of the usage clear.
-
-my_driver.c:
-
-#include <linux/dim.h>
-
-/* Callback for net DIM to schedule on a decision to change moderation */
-void my_driver_do_dim_work(struct work_struct *work)
-{
-	/* Get struct dim from struct work_struct */
-	struct dim *dim = container_of(work, struct dim,
-				       work);
-	/* Do interrupt moderation related stuff */
-	...
-
-	/* Signal net DIM work is done and it should move to next iteration */
-	dim->state = DIM_START_MEASURE;
-}
-
-/* My driver's interrupt handler */
-int my_driver_handle_interrupt(struct my_driver_entity *my_entity, ...)
-{
-	...
-	/* A struct to hold current measured data */
-	struct dim_sample dim_sample;
-	...
-	/* Initiate data sample struct with current data */
-	dim_update_sample(my_entity->events,
-		          my_entity->packets,
-		          my_entity->bytes,
-		          &dim_sample);
-	/* Call net DIM */
-	net_dim(&my_entity->dim, dim_sample);
-	...
-}
-
-/* My entity's initialization function (my_entity was already allocated) */
-int my_driver_init_my_entity(struct my_driver_entity *my_entity, ...)
-{
-	...
-	/* Initiate struct work_struct with my driver's callback function */
-	INIT_WORK(&my_entity->dim.work, my_driver_do_dim_work);
-	...
-}
diff --git a/Documentation/openrisc/openrisc_port.rst b/Documentation/openrisc/openrisc_port.rst
index a18747a..4b2c437 100644
--- a/Documentation/openrisc/openrisc_port.rst
+++ b/Documentation/openrisc/openrisc_port.rst
@@ -37,8 +37,8 @@
 
 Build the Linux kernel as usual::
 
-	make ARCH=openrisc defconfig
-	make ARCH=openrisc
+	make ARCH=openrisc CROSS_COMPILE="or1k-linux-" defconfig
+	make ARCH=openrisc CROSS_COMPILE="or1k-linux-"
 
 3) Running on FPGA (optional)
 
diff --git a/Documentation/powerpc/firmware-assisted-dump.rst b/Documentation/powerpc/firmware-assisted-dump.rst
index 0455a78..b3f3ee1 100644
--- a/Documentation/powerpc/firmware-assisted-dump.rst
+++ b/Documentation/powerpc/firmware-assisted-dump.rst
@@ -112,13 +112,13 @@
 
 -- On OPAL based machines (PowerNV), if the kernel is build with
    CONFIG_OPAL_CORE=y, OPAL memory at the time of crash is also
-   exported as /sys/firmware/opal/core file. This procfs file is
+   exported as /sys/firmware/opal/mpipl/core file. This procfs file is
    helpful in debugging OPAL crashes with GDB. The kernel memory
    used for exporting this procfs file can be released by echo'ing
-   '1' to /sys/kernel/fadump_release_opalcore node.
+   '1' to /sys/firmware/opal/mpipl/release_core node.
 
    e.g.
-     # echo 1 > /sys/kernel/fadump_release_opalcore
+     # echo 1 > /sys/firmware/opal/mpipl/release_core
 
 Implementation details:
 -----------------------
@@ -268,6 +268,11 @@
     be handled and vmcore will not be captured. This interface can be
     easily integrated with kdump service start/stop.
 
+ /sys/kernel/fadump/mem_reserved
+
+   This is used to display the memory reserved by FADump for saving the
+   crash dump.
+
  /sys/kernel/fadump_release_mem
     This file is available only when FADump is active during
     second kernel. This is used to release the reserved memory
@@ -283,14 +288,29 @@
     enhanced to use this interface to release the memory reserved for
     dump and continue without 2nd reboot.
 
- /sys/kernel/fadump_release_opalcore
+Note: /sys/kernel/fadump_release_opalcore sysfs has moved to
+      /sys/firmware/opal/mpipl/release_core
+
+ /sys/firmware/opal/mpipl/release_core
 
     This file is available only on OPAL based machines when FADump is
     active during capture kernel. This is used to release the memory
-    used by the kernel to export /sys/firmware/opal/core file. To
+    used by the kernel to export /sys/firmware/opal/mpipl/core file. To
     release this memory, echo '1' to it:
 
-    echo 1  > /sys/kernel/fadump_release_opalcore
+    echo 1  > /sys/firmware/opal/mpipl/release_core
+
+Note: The following FADump sysfs files are deprecated.
+
++----------------------------------+--------------------------------+
+| Deprecated                       | Alternative                    |
++----------------------------------+--------------------------------+
+| /sys/kernel/fadump_enabled       | /sys/kernel/fadump/enabled     |
++----------------------------------+--------------------------------+
+| /sys/kernel/fadump_registered    | /sys/kernel/fadump/registered  |
++----------------------------------+--------------------------------+
+| /sys/kernel/fadump_release_mem   | /sys/kernel/fadump/release_mem |
++----------------------------------+--------------------------------+
 
 Here is the list of files under powerpc debugfs:
 (Assuming debugfs is mounted on /sys/kernel/debug directory.)
diff --git a/Documentation/process/changes.rst b/Documentation/process/changes.rst
index e478635..91c5ff8 100644
--- a/Documentation/process/changes.rst
+++ b/Documentation/process/changes.rst
@@ -31,7 +31,7 @@
 ====================== ===============  ========================================
 GNU C                  4.6              gcc --version
 GNU make               3.81             make --version
-binutils               2.21             ld -v
+binutils               2.23             ld -v
 flex                   2.5.35           flex --version
 bison                  2.0              bison --version
 util-linux             2.10o            fdformat --version
@@ -76,7 +76,7 @@
 Binutils
 --------
 
-Binutils 2.21 or newer is needed to build the kernel.
+Binutils 2.23 or newer is needed to build the kernel.
 
 pkg-config
 ----------
diff --git a/Documentation/process/embargoed-hardware-issues.rst b/Documentation/process/embargoed-hardware-issues.rst
index a19d084..43cdc67 100644
--- a/Documentation/process/embargoed-hardware-issues.rst
+++ b/Documentation/process/embargoed-hardware-issues.rst
@@ -246,7 +246,8 @@
   ============= ========================================================
   ARM           Grant Likely <grant.likely@arm.com>
   AMD		Tom Lendacky <tom.lendacky@amd.com>
-  IBM
+  IBM Z         Christian Borntraeger <borntraeger@de.ibm.com>
+  IBM Power     Anton Blanchard <anton@linux.ibm.com>
   Intel		Tony Luck <tony.luck@intel.com>
   Qualcomm	Trilok Soni <tsoni@codeaurora.org>
 
diff --git a/Documentation/remoteproc.txt b/Documentation/remoteproc.txt
index 03c3d2e..2be1147 100644
--- a/Documentation/remoteproc.txt
+++ b/Documentation/remoteproc.txt
@@ -230,7 +230,7 @@
 Binary Firmware Structure
 =========================
 
-At this point remoteproc only supports ELF32 firmware binaries. However,
+At this point remoteproc supports ELF32 and ELF64 firmware binaries. However,
 it is quite expected that other platforms/devices which we'd want to
 support with this framework will be based on different binary formats.
 
diff --git a/Documentation/scsi/53c700.rst b/Documentation/scsi/53c700.rst
new file mode 100644
index 0000000..53a0e9f
--- /dev/null
+++ b/Documentation/scsi/53c700.rst
@@ -0,0 +1,134 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=======================
+The 53c700 Driver Notes
+=======================
+
+General Description
+===================
+
+This driver supports the 53c700 and 53c700-66 chips.  It also supports
+the 53c710 but only in 53c700 emulation mode.  It is full featured and
+does sync (-66 and 710 only), disconnects and tag command queueing.
+
+Since the 53c700 must be interfaced to a bus, you need to wrapper the
+card detector around this driver.  For an example, see the
+NCR_D700.[ch] or lasi700.[ch] files.
+
+The comments in the 53c700.[ch] files tell you which parts you need to
+fill in to get the driver working.
+
+
+Compile Time Flags
+==================
+
+A compile time flag is::
+
+	CONFIG_53C700_LE_ON_BE
+
+define if the chipset must be supported in little endian mode on a big
+endian architecture (used for the 700 on parisc).
+
+
+Using the Chip Core Driver
+==========================
+
+In order to plumb the 53c700 chip core driver into a working SCSI
+driver, you need to know three things about the way the chip is wired
+into your system (or expansion card).
+
+1. The clock speed of the SCSI core
+2. The interrupt line used
+3. The memory (or io space) location of the 53c700 registers.
+
+Optionally, you may also need to know other things, like how to read
+the SCSI Id from the card bios or whether the chip is wired for
+differential operation.
+
+Usually you can find items 2. and 3. from general spec. documents or
+even by examining the configuration of a working driver under another
+operating system.
+
+The clock speed is usually buried deep in the technical literature.
+It is required because it is used to set up both the synchronous and
+asynchronous dividers for the chip.  As a general rule of thumb,
+manufacturers set the clock speed at the lowest possible setting
+consistent with the best operation of the chip (although some choose
+to drive it off the CPU or bus clock rather than going to the expense
+of an extra clock chip).  The best operation clock speeds are:
+
+=========  =====
+53c700     25MHz
+53c700-66  50MHz
+53c710     40Mhz
+=========  =====
+
+Writing Your Glue Driver
+========================
+
+This will be a standard SCSI driver (I don't know of a good document
+describing this, just copy from some other driver) with at least a
+detect and release entry.
+
+In the detect routine, you need to allocate a struct
+NCR_700_Host_Parameters sized memory area and clear it (so that the
+default values for everything are 0).  Then you must fill in the
+parameters that matter to you (see below), plumb the NCR_700_intr
+routine into the interrupt line and call NCR_700_detect with the host
+template and the new parameters as arguments.  You should also call
+the relevant request_*_region function and place the register base
+address into the 'base' pointer of the host parameters.
+
+In the release routine, you must free the NCR_700_Host_Parameters that
+you allocated, call the corresponding release_*_region and free the
+interrupt.
+
+Handling Interrupts
+-------------------
+
+In general, you should just plumb the card's interrupt line in with
+
+request_irq(irq, NCR_700_intr, <irq flags>, <driver name>, host);
+
+where host is the return from the relevant NCR_700_detect() routine.
+
+You may also write your own interrupt handling routine which calls
+NCR_700_intr() directly.  However, you should only really do this if
+you have a card with more than one chip on it and you can read a
+register to tell which set of chips wants the interrupt.
+
+Settable NCR_700_Host_Parameters
+--------------------------------
+
+The following are a list of the user settable parameters:
+
+clock: (MANDATORY)
+  Set to the clock speed of the chip in MHz.
+
+base: (MANDATORY)
+  Set to the base of the io or mem region for the register set. On 64
+  bit architectures this is only 32 bits wide, so the registers must be
+  mapped into the low 32 bits of memory.
+
+pci_dev: (OPTIONAL)
+  Set to the PCI board device.  Leave NULL for a non-pci board.  This is
+  used for the pci_alloc_consistent() and pci_map_*() functions.
+
+dmode_extra: (OPTIONAL, 53c710 only)
+  Extra flags for the DMODE register.  These are used to control bus
+  output pins on the 710.  The settings should be a combination of
+  DMODE_FC1 and DMODE_FC2.  What these pins actually do is entirely up
+  to the board designer.  Usually it is safe to ignore this setting.
+
+differential: (OPTIONAL)
+  Set to 1 if the chip drives a differential bus.
+
+force_le_on_be: (OPTIONAL, only if CONFIG_53C700_LE_ON_BE is set)
+  Set to 1 if the chip is operating in little endian mode on a big
+  endian architecture.
+
+chip710: (OPTIONAL)
+  Set to 1 if the chip is a 53c710.
+
+burst_disable: (OPTIONAL, 53c710 only)
+  Disable 8 byte bursting for DMA transfers.
diff --git a/Documentation/scsi/53c700.txt b/Documentation/scsi/53c700.txt
deleted file mode 100644
index e31aceb..0000000
--- a/Documentation/scsi/53c700.txt
+++ /dev/null
@@ -1,135 +0,0 @@
-General Description
-===================
-
-This driver supports the 53c700 and 53c700-66 chips.  It also supports
-the 53c710 but only in 53c700 emulation mode.  It is full featured and
-does sync (-66 and 710 only), disconnects and tag command queueing.
-
-Since the 53c700 must be interfaced to a bus, you need to wrapper the
-card detector around this driver.  For an example, see the
-NCR_D700.[ch] or lasi700.[ch] files.
-
-The comments in the 53c700.[ch] files tell you which parts you need to
-fill in to get the driver working.
-
-
-Compile Time Flags
-==================
-
-A compile time flag is:
-
-CONFIG_53C700_LE_ON_BE
-
-define if the chipset must be supported in little endian mode on a big
-endian architecture (used for the 700 on parisc).
-
-
-Using the Chip Core Driver
-==========================
-
-In order to plumb the 53c700 chip core driver into a working SCSI
-driver, you need to know three things about the way the chip is wired
-into your system (or expansion card).
-
-1. The clock speed of the SCSI core
-2. The interrupt line used
-3. The memory (or io space) location of the 53c700 registers.
-
-Optionally, you may also need to know other things, like how to read
-the SCSI Id from the card bios or whether the chip is wired for
-differential operation.
-
-Usually you can find items 2. and 3. from general spec. documents or
-even by examining the configuration of a working driver under another
-operating system.
-
-The clock speed is usually buried deep in the technical literature.
-It is required because it is used to set up both the synchronous and
-asynchronous dividers for the chip.  As a general rule of thumb,
-manufacturers set the clock speed at the lowest possible setting
-consistent with the best operation of the chip (although some choose
-to drive it off the CPU or bus clock rather than going to the expense
-of an extra clock chip).  The best operation clock speeds are:
-
-53c700 - 25MHz
-53c700-66 - 50MHz
-53c710 - 40Mhz
-
-Writing Your Glue Driver
-========================
-
-This will be a standard SCSI driver (I don't know of a good document
-describing this, just copy from some other driver) with at least a
-detect and release entry.
-
-In the detect routine, you need to allocate a struct
-NCR_700_Host_Parameters sized memory area and clear it (so that the
-default values for everything are 0).  Then you must fill in the
-parameters that matter to you (see below), plumb the NCR_700_intr
-routine into the interrupt line and call NCR_700_detect with the host
-template and the new parameters as arguments.  You should also call
-the relevant request_*_region function and place the register base
-address into the `base' pointer of the host parameters.
-
-In the release routine, you must free the NCR_700_Host_Parameters that
-you allocated, call the corresponding release_*_region and free the
-interrupt.
-
-Handling Interrupts
--------------------
-
-In general, you should just plumb the card's interrupt line in with 
-
-request_irq(irq, NCR_700_intr, <irq flags>, <driver name>, host);
-
-where host is the return from the relevant NCR_700_detect() routine.
-
-You may also write your own interrupt handling routine which calls
-NCR_700_intr() directly.  However, you should only really do this if
-you have a card with more than one chip on it and you can read a
-register to tell which set of chips wants the interrupt.
-
-Settable NCR_700_Host_Parameters
---------------------------------
-
-The following are a list of the user settable parameters:
-
-clock: (MANDATORY)
-
-Set to the clock speed of the chip in MHz.
-
-base: (MANDATORY)
-
-set to the base of the io or mem region for the register set. On 64
-bit architectures this is only 32 bits wide, so the registers must be
-mapped into the low 32 bits of memory.
-
-pci_dev: (OPTIONAL)
-
-set to the PCI board device.  Leave NULL for a non-pci board.  This is
-used for the pci_alloc_consistent() and pci_map_*() functions.
-
-dmode_extra: (OPTIONAL, 53c710 only)
-
-extra flags for the DMODE register.  These are used to control bus
-output pins on the 710.  The settings should be a combination of
-DMODE_FC1 and DMODE_FC2.  What these pins actually do is entirely up
-to the board designer.  Usually it is safe to ignore this setting.
-
-differential: (OPTIONAL)
-
-set to 1 if the chip drives a differential bus.
-
-force_le_on_be: (OPTIONAL, only if CONFIG_53C700_LE_ON_BE is set)
-
-set to 1 if the chip is operating in little endian mode on a big
-endian architecture.
-
-chip710: (OPTIONAL)
-
-set to 1 if the chip is a 53c710.
-
-burst_disable: (OPTIONAL, 53c710 only)
-
-disable 8 byte bursting for DMA transfers.
-
diff --git a/Documentation/scsi/BusLogic.rst b/Documentation/scsi/BusLogic.rst
new file mode 100644
index 0000000..b601698
--- /dev/null
+++ b/Documentation/scsi/BusLogic.rst
@@ -0,0 +1,605 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================================================
+BusLogic MultiMaster and FlashPoint SCSI Driver for Linux
+=========================================================
+
+			 Version 2.0.15 for Linux 2.0
+
+			 Version 2.1.15 for Linux 2.1
+
+			      PRODUCTION RELEASE
+
+				17 August 1998
+
+			       Leonard N. Zubkoff
+
+			       Dandelion Digital
+
+			       lnz@dandelion.com
+
+	 Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
+
+
+Introduction
+============
+
+BusLogic, Inc. designed and manufactured a variety of high performance SCSI
+host adapters which share a common programming interface across a diverse
+collection of bus architectures by virtue of their MultiMaster ASIC technology.
+BusLogic was acquired by Mylex Corporation in February 1996, but the products
+supported by this driver originated under the BusLogic name and so that name is
+retained in the source code and documentation.
+
+This driver supports all present BusLogic MultiMaster Host Adapters, and should
+support any future MultiMaster designs with little or no modification.  More
+recently, BusLogic introduced the FlashPoint Host Adapters, which are less
+costly and rely on the host CPU, rather than including an onboard processor.
+Despite not having an onboard CPU, the FlashPoint Host Adapters perform very
+well and have very low command latency.  BusLogic has recently provided me with
+the FlashPoint Driver Developer's Kit, which comprises documentation and freely
+redistributable source code for the FlashPoint SCCB Manager.  The SCCB Manager
+is the library of code that runs on the host CPU and performs functions
+analogous to the firmware on the MultiMaster Host Adapters.  Thanks to their
+having provided the SCCB Manager, this driver now supports the FlashPoint Host
+Adapters as well.
+
+My primary goals in writing this completely new BusLogic driver for Linux are
+to achieve the full performance that BusLogic SCSI Host Adapters and modern
+SCSI peripherals are capable of, and to provide a highly robust driver that can
+be depended upon for high performance mission critical applications.  All of
+the major performance features can be configured from the Linux kernel command
+line or at module initialization time, allowing individual installations to
+tune driver performance and error recovery to their particular needs.
+
+The latest information on Linux support for BusLogic SCSI Host Adapters, as
+well as the most recent release of this driver and the latest firmware for the
+BT-948/958/958D, will always be available from my Linux Home Page at URL
+"http://sourceforge.net/projects/dandelion/".
+
+Bug reports should be sent via electronic mail to "lnz@dandelion.com".  Please
+include with the bug report the complete configuration messages reported by the
+driver and SCSI subsystem at startup, along with any subsequent system messages
+relevant to SCSI operations, and a detailed description of your system's
+hardware configuration.
+
+Mylex has been an excellent company to work with and I highly recommend their
+products to the Linux community.  In November 1995, I was offered the
+opportunity to become a beta test site for their latest MultiMaster product,
+the BT-948 PCI Ultra SCSI Host Adapter, and then again for the BT-958 PCI Wide
+Ultra SCSI Host Adapter in January 1996.  This was mutually beneficial since
+Mylex received a degree and kind of testing that their own testing group cannot
+readily achieve, and the Linux community has available high performance host
+adapters that have been well tested with Linux even before being brought to
+market.  This relationship has also given me the opportunity to interact
+directly with their technical staff, to understand more about the internal
+workings of their products, and in turn to educate them about the needs and
+potential of the Linux community.
+
+More recently, Mylex has reaffirmed the company's interest in supporting the
+Linux community, and I am now working on a Linux driver for the DAC960 PCI RAID
+Controllers.  Mylex's interest and support is greatly appreciated.
+
+Unlike some other vendors, if you contact Mylex Technical Support with a
+problem and are running Linux, they will not tell you that your use of their
+products is unsupported.  Their latest product marketing literature even states
+"Mylex SCSI host adapters are compatible with all major operating systems
+including: ... Linux ...".
+
+Mylex Corporation is located at 34551 Ardenwood Blvd., Fremont, California
+94555, USA and can be reached at 510/796-6100 or on the World Wide Web at
+http://www.mylex.com.  Mylex HBA Technical Support can be reached by electronic
+mail at techsup@mylex.com, by Voice at 510/608-2400, or by FAX at 510/745-7715.
+Contact information for offices in Europe and Japan is available on the Web
+site.
+
+
+Driver Features
+===============
+
+Configuration Reporting and Testing
+-----------------------------------
+
+  During system initialization, the driver reports extensively on the host
+  adapter hardware configuration, including the synchronous transfer parameters
+  requested and negotiated with each target device.  AutoSCSI settings for
+  Synchronous Negotiation, Wide Negotiation, and Disconnect/Reconnect are
+  reported for each target device, as well as the status of Tagged Queuing.
+  If the same setting is in effect for all target devices, then a single word
+  or phrase is used; otherwise, a letter is provided for each target device to
+  indicate the individual status.  The following examples
+  should clarify this reporting format:
+
+    Synchronous Negotiation: Ultra
+
+      Synchronous negotiation is enabled for all target devices and the host
+      adapter will attempt to negotiate for 20.0 mega-transfers/second.
+
+    Synchronous Negotiation: Fast
+
+      Synchronous negotiation is enabled for all target devices and the host
+      adapter will attempt to negotiate for 10.0 mega-transfers/second.
+
+    Synchronous Negotiation: Slow
+
+      Synchronous negotiation is enabled for all target devices and the host
+      adapter will attempt to negotiate for 5.0 mega-transfers/second.
+
+    Synchronous Negotiation: Disabled
+
+      Synchronous negotiation is disabled and all target devices are limited to
+      asynchronous operation.
+
+    Synchronous Negotiation: UFSNUUU#UUUUUUUU
+
+      Synchronous negotiation to Ultra speed is enabled for target devices 0
+      and 4 through 15, to Fast speed for target device 1, to Slow speed for
+      target device 2, and is not permitted to target device 3.  The host
+      adapter's SCSI ID is represented by the "#".
+
+    The status of Wide Negotiation, Disconnect/Reconnect, and Tagged Queuing
+    are reported as "Enabled", Disabled", or a sequence of "Y" and "N" letters.
+
+Performance Features
+--------------------
+
+  BusLogic SCSI Host Adapters directly implement SCSI-2 Tagged Queuing, and so
+  support has been included in the driver to utilize tagged queuing with any
+  target devices that report having the tagged queuing capability.  Tagged
+  queuing allows for multiple outstanding commands to be issued to each target
+  device or logical unit, and can improve I/O performance substantially.  In
+  addition, BusLogic's Strict Round Robin Mode is used to optimize host adapter
+  performance, and scatter/gather I/O can support as many segments as can be
+  effectively utilized by the Linux I/O subsystem.  Control over the use of
+  tagged queuing for each target device as well as individual selection of the
+  tagged queue depth is available through driver options provided on the kernel
+  command line or at module initialization time.  By default, the queue depth
+  is determined automatically based on the host adapter's total queue depth and
+  the number, type, speed, and capabilities of the target devices found.  In
+  addition, tagged queuing is automatically disabled whenever the host adapter
+  firmware version is known not to implement it correctly, or whenever a tagged
+  queue depth of 1 is selected.  Tagged queuing is also disabled for individual
+  target devices if disconnect/reconnect is disabled for that device.
+
+Robustness Features
+-------------------
+
+  The driver implements extensive error recovery procedures.  When the higher
+  level parts of the SCSI subsystem request that a timed out command be reset,
+  a selection is made between a full host adapter hard reset and SCSI bus reset
+  versus sending a bus device reset message to the individual target device
+  based on the recommendation of the SCSI subsystem.  Error recovery strategies
+  are selectable through driver options individually for each target device,
+  and also include sending a bus device reset to the specific target device
+  associated with the command being reset, as well as suppressing error
+  recovery entirely to avoid perturbing an improperly functioning device.  If
+  the bus device reset error recovery strategy is selected and sending a bus
+  device reset does not restore correct operation, the next command that is
+  reset will force a full host adapter hard reset and SCSI bus reset.  SCSI bus
+  resets caused by other devices and detected by the host adapter are also
+  handled by issuing a soft reset to the host adapter and re-initialization.
+  Finally, if tagged queuing is active and more than one command reset occurs
+  in a 10 minute interval, or if a command reset occurs within the first 10
+  minutes of operation, then tagged queuing will be disabled for that target
+  device.  These error recovery options improve overall system robustness by
+  preventing individual errant devices from causing the system as a whole to
+  lock up or crash, and thereby allowing a clean shutdown and restart after the
+  offending component is removed.
+
+PCI Configuration Support
+-------------------------
+
+  On PCI systems running kernels compiled with PCI BIOS support enabled, this
+  driver will interrogate the PCI configuration space and use the I/O port
+  addresses assigned by the system BIOS, rather than the ISA compatible I/O
+  port addresses.  The ISA compatible I/O port address is then disabled by the
+  driver.  On PCI systems it is also recommended that the AutoSCSI utility be
+  used to disable the ISA compatible I/O port entirely as it is not necessary.
+  The ISA compatible I/O port is disabled by default on the BT-948/958/958D.
+
+/proc File System Support
+-------------------------
+
+  Copies of the host adapter configuration information together with updated
+  data transfer and error recovery statistics are available through the
+  /proc/scsi/BusLogic/<N> interface.
+
+Shared Interrupts Support
+-------------------------
+
+  On systems that support shared interrupts, any number of BusLogic Host
+  Adapters may share the same interrupt request channel.
+
+
+Supported Host Adapters
+=======================
+
+The following list comprises the supported BusLogic SCSI Host Adapters as of
+the date of this document.  It is recommended that anyone purchasing a BusLogic
+Host Adapter not in the following table contact the author beforehand to verify
+that it is or will be supported.
+
+FlashPoint Series PCI Host Adapters:
+
+=======================	=============================================
+FlashPoint LT (BT-930)	Ultra SCSI-3
+FlashPoint LT (BT-930R)	Ultra SCSI-3 with RAIDPlus
+FlashPoint LT (BT-920)	Ultra SCSI-3 (BT-930 without BIOS)
+FlashPoint DL (BT-932)	Dual Channel Ultra SCSI-3
+FlashPoint DL (BT-932R)	Dual Channel Ultra SCSI-3 with RAIDPlus
+FlashPoint LW (BT-950)	Wide Ultra SCSI-3
+FlashPoint LW (BT-950R)	Wide Ultra SCSI-3 with RAIDPlus
+FlashPoint DW (BT-952)	Dual Channel Wide Ultra SCSI-3
+FlashPoint DW (BT-952R)	Dual Channel Wide Ultra SCSI-3 with RAIDPlus
+=======================	=============================================
+
+MultiMaster "W" Series Host Adapters:
+
+=======     ===		==============================
+BT-948	    PCI		Ultra SCSI-3
+BT-958	    PCI		Wide Ultra SCSI-3
+BT-958D	    PCI		Wide Differential Ultra SCSI-3
+=======     ===		==============================
+
+MultiMaster "C" Series Host Adapters:
+
+========    ====	==============================
+BT-946C	    PCI		Fast SCSI-2
+BT-956C	    PCI		Wide Fast SCSI-2
+BT-956CD    PCI		Wide Differential Fast SCSI-2
+BT-445C	    VLB		Fast SCSI-2
+BT-747C	    EISA	Fast SCSI-2
+BT-757C	    EISA	Wide Fast SCSI-2
+BT-757CD    EISA	Wide Differential Fast SCSI-2
+BT-545C	    ISA		Fast SCSI-2
+BT-540CF    ISA		Fast SCSI-2
+========    ====	==============================
+
+MultiMaster "S" Series Host Adapters:
+
+=======     ====	==============================
+BT-445S	    VLB		Fast SCSI-2
+BT-747S	    EISA	Fast SCSI-2
+BT-747D	    EISA	Differential Fast SCSI-2
+BT-757S	    EISA	Wide Fast SCSI-2
+BT-757D	    EISA	Wide Differential Fast SCSI-2
+BT-545S	    ISA		Fast SCSI-2
+BT-542D	    ISA		Differential Fast SCSI-2
+BT-742A	    EISA	SCSI-2 (742A revision H)
+BT-542B	    ISA		SCSI-2 (542B revision H)
+=======     ====	==============================
+
+MultiMaster "A" Series Host Adapters:
+
+=======     ====	==============================
+BT-742A	    EISA	SCSI-2 (742A revisions A - G)
+BT-542B	    ISA		SCSI-2 (542B revisions A - G)
+=======     ====	==============================
+
+AMI FastDisk Host Adapters that are true BusLogic MultiMaster clones are also
+supported by this driver.
+
+BusLogic SCSI Host Adapters are available packaged both as bare boards and as
+retail kits.  The BT- model numbers above refer to the bare board packaging.
+The retail kit model numbers are found by replacing BT- with KT- in the above
+list.  The retail kit includes the bare board and manual as well as cabling and
+driver media and documentation that are not provided with bare boards.
+
+
+FlashPoint Installation Notes
+=============================
+
+RAIDPlus Support
+----------------
+
+  FlashPoint Host Adapters now include RAIDPlus, Mylex's bootable software
+  RAID.  RAIDPlus is not supported on Linux, and there are no plans to support
+  it.  The MD driver in Linux 2.0 provides for concatenation (LINEAR) and
+  striping (RAID-0), and support for mirroring (RAID-1), fixed parity (RAID-4),
+  and distributed parity (RAID-5) is available separately.  The built-in Linux
+  RAID support is generally more flexible and is expected to perform better
+  than RAIDPlus, so there is little impetus to include RAIDPlus support in the
+  BusLogic driver.
+
+Enabling UltraSCSI Transfers
+----------------------------
+
+  FlashPoint Host Adapters ship with their configuration set to "Factory
+  Default" settings that are conservative and do not allow for UltraSCSI speed
+  to be negotiated.  This results in fewer problems when these host adapters
+  are installed in systems with cabling or termination that is not sufficient
+  for UltraSCSI operation, or where existing SCSI devices do not properly
+  respond to synchronous transfer negotiation for UltraSCSI speed.  AutoSCSI
+  may be used to load "Optimum Performance" settings which allow UltraSCSI
+  speed to be negotiated with all devices, or UltraSCSI speed can be enabled on
+  an individual basis.  It is recommended that SCAM be manually disabled after
+  the "Optimum Performance" settings are loaded.
+
+
+BT-948/958/958D Installation Notes
+==================================
+
+The BT-948/958/958D PCI Ultra SCSI Host Adapters have some features which may
+require attention in some circumstances when installing Linux.
+
+PCI I/O Port Assignments
+------------------------
+
+  When configured to factory default settings, the BT-948/958/958D will only
+  recognize the PCI I/O port assignments made by the motherboard's PCI BIOS.
+  The BT-948/958/958D will not respond to any of the ISA compatible I/O ports
+  that previous BusLogic SCSI Host Adapters respond to.  This driver supports
+  the PCI I/O port assignments, so this is the preferred configuration.
+  However, if the obsolete BusLogic driver must be used for any reason, such as
+  a Linux distribution that does not yet use this driver in its boot kernel,
+  BusLogic has provided an AutoSCSI configuration option to enable a legacy ISA
+  compatible I/O port.
+
+  To enable this backward compatibility option, invoke the AutoSCSI utility via
+  Ctrl-B at system startup and select "Adapter Configuration", "View/Modify
+  Configuration", and then change the "ISA Compatible Port" setting from
+  "Disable" to "Primary" or "Alternate".  Once this driver has been installed,
+  the "ISA Compatible Port" option should be set back to "Disable" to avoid
+  possible future I/O port conflicts.  The older BT-946C/956C/956CD also have
+  this configuration option, but the factory default setting is "Primary".
+
+PCI Slot Scanning Order
+-----------------------
+
+  In systems with multiple BusLogic PCI Host Adapters, the order in which the
+  PCI slots are scanned may appear reversed with the BT-948/958/958D as
+  compared to the BT-946C/956C/956CD.  For booting from a SCSI disk to work
+  correctly, it is necessary that the host adapter's BIOS and the kernel agree
+  on which disk is the boot device, which requires that they recognize the PCI
+  host adapters in the same order.  The motherboard's PCI BIOS provides a
+  standard way of enumerating the PCI host adapters, which is used by the Linux
+  kernel.  Some PCI BIOS implementations enumerate the PCI slots in order of
+  increasing bus number and device number, while others do so in the opposite
+  direction.
+
+  Unfortunately, Microsoft decided that Windows 95 would always enumerate the
+  PCI slots in order of increasing bus number and device number regardless of
+  the PCI BIOS enumeration, and requires that their scheme be supported by the
+  host adapter's BIOS to receive Windows 95 certification.  Therefore, the
+  factory default settings of the BT-948/958/958D enumerate the host adapters
+  by increasing bus number and device number.  To disable this feature, invoke
+  the AutoSCSI utility via Ctrl-B at system startup and select "Adapter
+  Configuration", "View/Modify Configuration", press Ctrl-F10, and then change
+  the "Use Bus And Device # For PCI Scanning Seq." option to OFF.
+
+  This driver will interrogate the setting of the PCI Scanning Sequence option
+  so as to recognize the host adapters in the same order as they are enumerated
+  by the host adapter's BIOS.
+
+Enabling UltraSCSI Transfers
+----------------------------
+
+  The BT-948/958/958D ship with their configuration set to "Factory Default"
+  settings that are conservative and do not allow for UltraSCSI speed to be
+  negotiated.  This results in fewer problems when these host adapters are
+  installed in systems with cabling or termination that is not sufficient for
+  UltraSCSI operation, or where existing SCSI devices do not properly respond
+  to synchronous transfer negotiation for UltraSCSI speed.  AutoSCSI may be
+  used to load "Optimum Performance" settings which allow UltraSCSI speed to be
+  negotiated with all devices, or UltraSCSI speed can be enabled on an
+  individual basis.  It is recommended that SCAM be manually disabled after the
+  "Optimum Performance" settings are loaded.
+
+
+Driver Options
+==============
+
+BusLogic Driver Options may be specified either via the Linux Kernel Command
+Line or via the Loadable Kernel Module Installation Facility.  Driver Options
+for multiple host adapters may be specified either by separating the option
+strings by a semicolon, or by specifying multiple "BusLogic=" strings on the
+command line.  Individual option specifications for a single host adapter are
+separated by commas.  The Probing and Debugging Options apply to all host
+adapters whereas the remaining options apply individually only to the
+selected host adapter.
+
+The BusLogic Driver Probing Options comprise the following:
+
+IO:<integer>
+
+  The "IO:" option specifies an ISA I/O Address to be probed for a non-PCI
+  MultiMaster Host Adapter.  If neither "IO:" nor "NoProbeISA" options are
+  specified, then the standard list of BusLogic MultiMaster ISA I/O Addresses
+  will be probed (0x330, 0x334, 0x230, 0x234, 0x130, and 0x134).  Multiple
+  "IO:" options may be specified to precisely determine the I/O Addresses to
+  be probed, but the probe order will always follow the standard list.
+
+NoProbe
+
+  The "NoProbe" option disables all probing and therefore no BusLogic Host
+  Adapters will be detected.
+
+NoProbeISA
+
+  The "NoProbeISA" option disables probing of the standard BusLogic ISA I/O
+  Addresses and therefore only PCI MultiMaster and FlashPoint Host Adapters
+  will be detected.
+
+NoProbePCI
+
+  The "NoProbePCI" options disables the interrogation of PCI Configuration
+  Space and therefore only ISA Multimaster Host Adapters will be detected, as
+  well as PCI Multimaster Host Adapters that have their ISA Compatible I/O
+  Port set to "Primary" or "Alternate".
+
+NoSortPCI
+
+  The "NoSortPCI" option forces PCI MultiMaster Host Adapters to be
+  enumerated in the order provided by the PCI BIOS, ignoring any setting of
+  the AutoSCSI "Use Bus And Device # For PCI Scanning Seq." option.
+
+MultiMasterFirst
+
+  The "MultiMasterFirst" option forces MultiMaster Host Adapters to be probed
+  before FlashPoint Host Adapters.  By default, if both FlashPoint and PCI
+  MultiMaster Host Adapters are present, this driver will probe for
+  FlashPoint Host Adapters first unless the BIOS primary disk is controlled
+  by the first PCI MultiMaster Host Adapter, in which case MultiMaster Host
+  Adapters will be probed first.
+
+FlashPointFirst
+
+  The "FlashPointFirst" option forces FlashPoint Host Adapters to be probed
+  before MultiMaster Host Adapters.
+
+The BusLogic Driver Tagged Queuing Options allow for explicitly specifying
+the Queue Depth and whether Tagged Queuing is permitted for each Target
+Device (assuming that the Target Device supports Tagged Queuing).  The Queue
+Depth is the number of SCSI Commands that are allowed to be concurrently
+presented for execution (either to the Host Adapter or Target Device).  Note
+that explicitly enabling Tagged Queuing may lead to problems; the option to
+enable or disable Tagged Queuing is provided primarily to allow disabling
+Tagged Queuing on Target Devices that do not implement it correctly.  The
+following options are available:
+
+QueueDepth:<integer>
+
+  The "QueueDepth:" or QD:" option specifies the Queue Depth to use for all
+  Target Devices that support Tagged Queuing, as well as the maximum Queue
+  Depth for devices that do not support Tagged Queuing.  If no Queue Depth
+  option is provided, the Queue Depth will be determined automatically based
+  on the Host Adapter's Total Queue Depth and the number, type, speed, and
+  capabilities of the detected Target Devices.  For Host Adapters that
+  require ISA Bounce Buffers, the Queue Depth is automatically set by default
+  to BusLogic_TaggedQueueDepthBB or BusLogic_UntaggedQueueDepthBB to avoid
+  excessive preallocation of DMA Bounce Buffer memory.  Target Devices that
+  do not support Tagged Queuing always have their Queue Depth set to
+  BusLogic_UntaggedQueueDepth or BusLogic_UntaggedQueueDepthBB, unless a
+  lower Queue Depth option is provided.  A Queue Depth of 1 automatically
+  disables Tagged Queuing.
+
+QueueDepth:[<integer>,<integer>...]
+
+  The "QueueDepth:[...]" or "QD:[...]" option specifies the Queue Depth
+  individually for each Target Device.  If an <integer> is omitted, the
+  associated Target Device will have its Queue Depth selected automatically.
+
+TaggedQueuing:Default
+
+  The "TaggedQueuing:Default" or "TQ:Default" option permits Tagged Queuing
+  based on the firmware version of the BusLogic Host Adapter and based on
+  whether the Queue Depth allows queuing multiple commands.
+
+TaggedQueuing:Enable
+
+  The "TaggedQueuing:Enable" or "TQ:Enable" option enables Tagged Queuing for
+  all Target Devices on this Host Adapter, overriding any limitation that
+  would otherwise be imposed based on the Host Adapter firmware version.
+
+TaggedQueuing:Disable
+
+  The "TaggedQueuing:Disable" or "TQ:Disable" option disables Tagged Queuing
+  for all Target Devices on this Host Adapter.
+
+TaggedQueuing:<Target-Spec>
+
+  The "TaggedQueuing:<Target-Spec>" or "TQ:<Target-Spec>" option controls
+  Tagged Queuing individually for each Target Device.  <Target-Spec> is a
+  sequence of "Y", "N", and "X" characters.  "Y" enables Tagged Queuing, "N"
+  disables Tagged Queuing, and "X" accepts the default based on the firmware
+  version.  The first character refers to Target Device 0, the second to
+  Target Device 1, and so on; if the sequence of "Y", "N", and "X" characters
+  does not cover all the Target Devices, unspecified characters are assumed
+  to be "X".
+
+The BusLogic Driver Miscellaneous Options comprise the following:
+
+BusSettleTime:<seconds>
+
+  The "BusSettleTime:" or "BST:" option specifies the Bus Settle Time in
+  seconds.  The Bus Settle Time is the amount of time to wait between a Host
+  Adapter Hard Reset which initiates a SCSI Bus Reset and issuing any SCSI
+  Commands.  If unspecified, it defaults to BusLogic_DefaultBusSettleTime.
+
+InhibitTargetInquiry
+
+  The "InhibitTargetInquiry" option inhibits the execution of an Inquire
+  Target Devices or Inquire Installed Devices command on MultiMaster Host
+  Adapters.  This may be necessary with some older Target Devices that do not
+  respond correctly when Logical Units above 0 are addressed.
+
+The BusLogic Driver Debugging Options comprise the following:
+
+TraceProbe
+
+  The "TraceProbe" option enables tracing of Host Adapter Probing.
+
+TraceHardwareReset
+
+  The "TraceHardwareReset" option enables tracing of Host Adapter Hardware
+  Reset.
+
+TraceConfiguration
+
+  The "TraceConfiguration" option enables tracing of Host Adapter
+  Configuration.
+
+TraceErrors
+
+  The "TraceErrors" option enables tracing of SCSI Commands that return an
+  error from the Target Device.  The CDB and Sense Data will be printed for
+  each SCSI Command that fails.
+
+Debug
+
+  The "Debug" option enables all debugging options.
+
+The following examples demonstrate setting the Queue Depth for Target Devices
+1 and 2 on the first host adapter to 7 and 15, the Queue Depth for all Target
+Devices on the second host adapter to 31, and the Bus Settle Time on the
+second host adapter to 30 seconds.
+
+Linux Kernel Command Line::
+
+  linux BusLogic=QueueDepth:[,7,15];QueueDepth:31,BusSettleTime:30
+
+LILO Linux Boot Loader (in /etc/lilo.conf)::
+
+  append = "BusLogic=QueueDepth:[,7,15];QueueDepth:31,BusSettleTime:30"
+
+INSMOD Loadable Kernel Module Installation Facility::
+
+  insmod BusLogic.o \
+      'BusLogic="QueueDepth:[,7,15];QueueDepth:31,BusSettleTime:30"'
+
+
+.. Note::
+
+      Module Utilities 2.1.71 or later is required for correct parsing
+      of driver options containing commas.
+
+
+Driver Installation
+===================
+
+This distribution was prepared for Linux kernel version 2.0.35, but should be
+compatible with 2.0.4 or any later 2.0 series kernel.
+
+To install the new BusLogic SCSI driver, you may use the following commands,
+replacing "/usr/src" with wherever you keep your Linux kernel source tree::
+
+  cd /usr/src
+  tar -xvzf BusLogic-2.0.15.tar.gz
+  mv README.* LICENSE.* BusLogic.[ch] FlashPoint.c linux/drivers/scsi
+  patch -p0 < BusLogic.patch (only for 2.0.33 and below)
+  cd linux
+  make config
+  make zImage
+
+Then install "arch/x86/boot/zImage" as your standard kernel, run lilo if
+appropriate, and reboot.
+
+
+BusLogic Announcements Mailing List
+===================================
+
+The BusLogic Announcements Mailing List provides a forum for informing Linux
+users of new driver releases and other announcements regarding Linux support
+for BusLogic SCSI Host Adapters.  To join the mailing list, send a message to
+"buslogic-announce-request@dandelion.com" with the line "subscribe" in the
+message body.
diff --git a/Documentation/scsi/BusLogic.txt b/Documentation/scsi/BusLogic.txt
deleted file mode 100644
index 48e982c..0000000
--- a/Documentation/scsi/BusLogic.txt
+++ /dev/null
@@ -1,566 +0,0 @@
-	   BusLogic MultiMaster and FlashPoint SCSI Driver for Linux
-
-			 Version 2.0.15 for Linux 2.0
-			 Version 2.1.15 for Linux 2.1
-
-			      PRODUCTION RELEASE
-
-				17 August 1998
-
-			       Leonard N. Zubkoff
-			       Dandelion Digital
-			       lnz@dandelion.com
-
-	 Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
-
-
-				 INTRODUCTION
-
-BusLogic, Inc. designed and manufactured a variety of high performance SCSI
-host adapters which share a common programming interface across a diverse
-collection of bus architectures by virtue of their MultiMaster ASIC technology.
-BusLogic was acquired by Mylex Corporation in February 1996, but the products
-supported by this driver originated under the BusLogic name and so that name is
-retained in the source code and documentation.
-
-This driver supports all present BusLogic MultiMaster Host Adapters, and should
-support any future MultiMaster designs with little or no modification.  More
-recently, BusLogic introduced the FlashPoint Host Adapters, which are less
-costly and rely on the host CPU, rather than including an onboard processor.
-Despite not having an onboard CPU, the FlashPoint Host Adapters perform very
-well and have very low command latency.  BusLogic has recently provided me with
-the FlashPoint Driver Developer's Kit, which comprises documentation and freely
-redistributable source code for the FlashPoint SCCB Manager.  The SCCB Manager
-is the library of code that runs on the host CPU and performs functions
-analogous to the firmware on the MultiMaster Host Adapters.  Thanks to their
-having provided the SCCB Manager, this driver now supports the FlashPoint Host
-Adapters as well.
-
-My primary goals in writing this completely new BusLogic driver for Linux are
-to achieve the full performance that BusLogic SCSI Host Adapters and modern
-SCSI peripherals are capable of, and to provide a highly robust driver that can
-be depended upon for high performance mission critical applications.  All of
-the major performance features can be configured from the Linux kernel command
-line or at module initialization time, allowing individual installations to
-tune driver performance and error recovery to their particular needs.
-
-The latest information on Linux support for BusLogic SCSI Host Adapters, as
-well as the most recent release of this driver and the latest firmware for the
-BT-948/958/958D, will always be available from my Linux Home Page at URL
-"http://sourceforge.net/projects/dandelion/".
-
-Bug reports should be sent via electronic mail to "lnz@dandelion.com".  Please
-include with the bug report the complete configuration messages reported by the
-driver and SCSI subsystem at startup, along with any subsequent system messages
-relevant to SCSI operations, and a detailed description of your system's
-hardware configuration.
-
-Mylex has been an excellent company to work with and I highly recommend their
-products to the Linux community.  In November 1995, I was offered the
-opportunity to become a beta test site for their latest MultiMaster product,
-the BT-948 PCI Ultra SCSI Host Adapter, and then again for the BT-958 PCI Wide
-Ultra SCSI Host Adapter in January 1996.  This was mutually beneficial since
-Mylex received a degree and kind of testing that their own testing group cannot
-readily achieve, and the Linux community has available high performance host
-adapters that have been well tested with Linux even before being brought to
-market.  This relationship has also given me the opportunity to interact
-directly with their technical staff, to understand more about the internal
-workings of their products, and in turn to educate them about the needs and
-potential of the Linux community.
-
-More recently, Mylex has reaffirmed the company's interest in supporting the
-Linux community, and I am now working on a Linux driver for the DAC960 PCI RAID
-Controllers.  Mylex's interest and support is greatly appreciated.
-
-Unlike some other vendors, if you contact Mylex Technical Support with a
-problem and are running Linux, they will not tell you that your use of their
-products is unsupported.  Their latest product marketing literature even states
-"Mylex SCSI host adapters are compatible with all major operating systems
-including: ... Linux ...".
-
-Mylex Corporation is located at 34551 Ardenwood Blvd., Fremont, California
-94555, USA and can be reached at 510/796-6100 or on the World Wide Web at
-http://www.mylex.com.  Mylex HBA Technical Support can be reached by electronic
-mail at techsup@mylex.com, by Voice at 510/608-2400, or by FAX at 510/745-7715.
-Contact information for offices in Europe and Japan is available on the Web
-site.
-
-
-				DRIVER FEATURES
-
-o Configuration Reporting and Testing
-
-  During system initialization, the driver reports extensively on the host
-  adapter hardware configuration, including the synchronous transfer parameters
-  requested and negotiated with each target device.  AutoSCSI settings for
-  Synchronous Negotiation, Wide Negotiation, and Disconnect/Reconnect are
-  reported for each target device, as well as the status of Tagged Queuing.
-  If the same setting is in effect for all target devices, then a single word
-  or phrase is used; otherwise, a letter is provided for each target device to
-  indicate the individual status.  The following examples
-  should clarify this reporting format:
-
-    Synchronous Negotiation: Ultra
-
-      Synchronous negotiation is enabled for all target devices and the host
-      adapter will attempt to negotiate for 20.0 mega-transfers/second.
-
-    Synchronous Negotiation: Fast
-
-      Synchronous negotiation is enabled for all target devices and the host
-      adapter will attempt to negotiate for 10.0 mega-transfers/second.
-
-    Synchronous Negotiation: Slow
-
-      Synchronous negotiation is enabled for all target devices and the host
-      adapter will attempt to negotiate for 5.0 mega-transfers/second.
-
-    Synchronous Negotiation: Disabled
-
-      Synchronous negotiation is disabled and all target devices are limited to
-      asynchronous operation.
-
-    Synchronous Negotiation: UFSNUUU#UUUUUUUU
-
-      Synchronous negotiation to Ultra speed is enabled for target devices 0
-      and 4 through 15, to Fast speed for target device 1, to Slow speed for
-      target device 2, and is not permitted to target device 3.  The host
-      adapter's SCSI ID is represented by the "#".
-
-    The status of Wide Negotiation, Disconnect/Reconnect, and Tagged Queuing
-    are reported as "Enabled", Disabled", or a sequence of "Y" and "N" letters.
-
-o Performance Features
-
-  BusLogic SCSI Host Adapters directly implement SCSI-2 Tagged Queuing, and so
-  support has been included in the driver to utilize tagged queuing with any
-  target devices that report having the tagged queuing capability.  Tagged
-  queuing allows for multiple outstanding commands to be issued to each target
-  device or logical unit, and can improve I/O performance substantially.  In
-  addition, BusLogic's Strict Round Robin Mode is used to optimize host adapter
-  performance, and scatter/gather I/O can support as many segments as can be
-  effectively utilized by the Linux I/O subsystem.  Control over the use of
-  tagged queuing for each target device as well as individual selection of the
-  tagged queue depth is available through driver options provided on the kernel
-  command line or at module initialization time.  By default, the queue depth
-  is determined automatically based on the host adapter's total queue depth and
-  the number, type, speed, and capabilities of the target devices found.  In
-  addition, tagged queuing is automatically disabled whenever the host adapter
-  firmware version is known not to implement it correctly, or whenever a tagged
-  queue depth of 1 is selected.  Tagged queuing is also disabled for individual
-  target devices if disconnect/reconnect is disabled for that device.
-
-o Robustness Features
-
-  The driver implements extensive error recovery procedures.  When the higher
-  level parts of the SCSI subsystem request that a timed out command be reset,
-  a selection is made between a full host adapter hard reset and SCSI bus reset
-  versus sending a bus device reset message to the individual target device
-  based on the recommendation of the SCSI subsystem.  Error recovery strategies
-  are selectable through driver options individually for each target device,
-  and also include sending a bus device reset to the specific target device
-  associated with the command being reset, as well as suppressing error
-  recovery entirely to avoid perturbing an improperly functioning device.  If
-  the bus device reset error recovery strategy is selected and sending a bus
-  device reset does not restore correct operation, the next command that is
-  reset will force a full host adapter hard reset and SCSI bus reset.  SCSI bus
-  resets caused by other devices and detected by the host adapter are also
-  handled by issuing a soft reset to the host adapter and re-initialization.
-  Finally, if tagged queuing is active and more than one command reset occurs
-  in a 10 minute interval, or if a command reset occurs within the first 10
-  minutes of operation, then tagged queuing will be disabled for that target
-  device.  These error recovery options improve overall system robustness by
-  preventing individual errant devices from causing the system as a whole to
-  lock up or crash, and thereby allowing a clean shutdown and restart after the
-  offending component is removed.
-
-o PCI Configuration Support
-
-  On PCI systems running kernels compiled with PCI BIOS support enabled, this
-  driver will interrogate the PCI configuration space and use the I/O port
-  addresses assigned by the system BIOS, rather than the ISA compatible I/O
-  port addresses.  The ISA compatible I/O port address is then disabled by the
-  driver.  On PCI systems it is also recommended that the AutoSCSI utility be
-  used to disable the ISA compatible I/O port entirely as it is not necessary.
-  The ISA compatible I/O port is disabled by default on the BT-948/958/958D.
-
-o /proc File System Support
-
-  Copies of the host adapter configuration information together with updated
-  data transfer and error recovery statistics are available through the
-  /proc/scsi/BusLogic/<N> interface.
-
-o Shared Interrupts Support
-
-  On systems that support shared interrupts, any number of BusLogic Host
-  Adapters may share the same interrupt request channel.
-
-
-			    SUPPORTED HOST ADAPTERS
-
-The following list comprises the supported BusLogic SCSI Host Adapters as of
-the date of this document.  It is recommended that anyone purchasing a BusLogic
-Host Adapter not in the following table contact the author beforehand to verify
-that it is or will be supported.
-
-FlashPoint Series PCI Host Adapters:
-
-FlashPoint LT (BT-930)	Ultra SCSI-3
-FlashPoint LT (BT-930R)	Ultra SCSI-3 with RAIDPlus
-FlashPoint LT (BT-920)	Ultra SCSI-3 (BT-930 without BIOS)
-FlashPoint DL (BT-932)	Dual Channel Ultra SCSI-3
-FlashPoint DL (BT-932R)	Dual Channel Ultra SCSI-3 with RAIDPlus
-FlashPoint LW (BT-950)	Wide Ultra SCSI-3
-FlashPoint LW (BT-950R)	Wide Ultra SCSI-3 with RAIDPlus
-FlashPoint DW (BT-952)	Dual Channel Wide Ultra SCSI-3
-FlashPoint DW (BT-952R)	Dual Channel Wide Ultra SCSI-3 with RAIDPlus
-
-MultiMaster "W" Series Host Adapters:
-
-BT-948	    PCI		Ultra SCSI-3
-BT-958	    PCI		Wide Ultra SCSI-3
-BT-958D	    PCI		Wide Differential Ultra SCSI-3
-
-MultiMaster "C" Series Host Adapters:
-
-BT-946C	    PCI		Fast SCSI-2
-BT-956C	    PCI		Wide Fast SCSI-2
-BT-956CD    PCI		Wide Differential Fast SCSI-2
-BT-445C	    VLB		Fast SCSI-2
-BT-747C	    EISA	Fast SCSI-2
-BT-757C	    EISA	Wide Fast SCSI-2
-BT-757CD    EISA	Wide Differential Fast SCSI-2
-BT-545C	    ISA		Fast SCSI-2
-BT-540CF    ISA		Fast SCSI-2
-
-MultiMaster "S" Series Host Adapters:
-
-BT-445S	    VLB		Fast SCSI-2
-BT-747S	    EISA	Fast SCSI-2
-BT-747D	    EISA	Differential Fast SCSI-2
-BT-757S	    EISA	Wide Fast SCSI-2
-BT-757D	    EISA	Wide Differential Fast SCSI-2
-BT-545S	    ISA		Fast SCSI-2
-BT-542D	    ISA		Differential Fast SCSI-2
-BT-742A	    EISA	SCSI-2 (742A revision H)
-BT-542B	    ISA		SCSI-2 (542B revision H)
-
-MultiMaster "A" Series Host Adapters:
-
-BT-742A	    EISA	SCSI-2 (742A revisions A - G)
-BT-542B	    ISA		SCSI-2 (542B revisions A - G)
-
-AMI FastDisk Host Adapters that are true BusLogic MultiMaster clones are also
-supported by this driver.
-
-BusLogic SCSI Host Adapters are available packaged both as bare boards and as
-retail kits.  The BT- model numbers above refer to the bare board packaging.
-The retail kit model numbers are found by replacing BT- with KT- in the above
-list.  The retail kit includes the bare board and manual as well as cabling and
-driver media and documentation that are not provided with bare boards.
-
-
-			 FLASHPOINT INSTALLATION NOTES
-
-o RAIDPlus Support
-
-  FlashPoint Host Adapters now include RAIDPlus, Mylex's bootable software
-  RAID.  RAIDPlus is not supported on Linux, and there are no plans to support
-  it.  The MD driver in Linux 2.0 provides for concatenation (LINEAR) and
-  striping (RAID-0), and support for mirroring (RAID-1), fixed parity (RAID-4),
-  and distributed parity (RAID-5) is available separately.  The built-in Linux
-  RAID support is generally more flexible and is expected to perform better
-  than RAIDPlus, so there is little impetus to include RAIDPlus support in the
-  BusLogic driver.
-
-o Enabling UltraSCSI Transfers
-
-  FlashPoint Host Adapters ship with their configuration set to "Factory
-  Default" settings that are conservative and do not allow for UltraSCSI speed
-  to be negotiated.  This results in fewer problems when these host adapters
-  are installed in systems with cabling or termination that is not sufficient
-  for UltraSCSI operation, or where existing SCSI devices do not properly
-  respond to synchronous transfer negotiation for UltraSCSI speed.  AutoSCSI
-  may be used to load "Optimum Performance" settings which allow UltraSCSI
-  speed to be negotiated with all devices, or UltraSCSI speed can be enabled on
-  an individual basis.  It is recommended that SCAM be manually disabled after
-  the "Optimum Performance" settings are loaded.
-
-
-		      BT-948/958/958D INSTALLATION NOTES
-
-The BT-948/958/958D PCI Ultra SCSI Host Adapters have some features which may
-require attention in some circumstances when installing Linux.
-
-o PCI I/O Port Assignments
-
-  When configured to factory default settings, the BT-948/958/958D will only
-  recognize the PCI I/O port assignments made by the motherboard's PCI BIOS.
-  The BT-948/958/958D will not respond to any of the ISA compatible I/O ports
-  that previous BusLogic SCSI Host Adapters respond to.  This driver supports
-  the PCI I/O port assignments, so this is the preferred configuration.
-  However, if the obsolete BusLogic driver must be used for any reason, such as
-  a Linux distribution that does not yet use this driver in its boot kernel,
-  BusLogic has provided an AutoSCSI configuration option to enable a legacy ISA
-  compatible I/O port.
-
-  To enable this backward compatibility option, invoke the AutoSCSI utility via
-  Ctrl-B at system startup and select "Adapter Configuration", "View/Modify
-  Configuration", and then change the "ISA Compatible Port" setting from
-  "Disable" to "Primary" or "Alternate".  Once this driver has been installed,
-  the "ISA Compatible Port" option should be set back to "Disable" to avoid
-  possible future I/O port conflicts.  The older BT-946C/956C/956CD also have
-  this configuration option, but the factory default setting is "Primary".
-
-o PCI Slot Scanning Order
-
-  In systems with multiple BusLogic PCI Host Adapters, the order in which the
-  PCI slots are scanned may appear reversed with the BT-948/958/958D as
-  compared to the BT-946C/956C/956CD.  For booting from a SCSI disk to work
-  correctly, it is necessary that the host adapter's BIOS and the kernel agree
-  on which disk is the boot device, which requires that they recognize the PCI
-  host adapters in the same order.  The motherboard's PCI BIOS provides a
-  standard way of enumerating the PCI host adapters, which is used by the Linux
-  kernel.  Some PCI BIOS implementations enumerate the PCI slots in order of
-  increasing bus number and device number, while others do so in the opposite
-  direction.
-
-  Unfortunately, Microsoft decided that Windows 95 would always enumerate the
-  PCI slots in order of increasing bus number and device number regardless of
-  the PCI BIOS enumeration, and requires that their scheme be supported by the
-  host adapter's BIOS to receive Windows 95 certification.  Therefore, the
-  factory default settings of the BT-948/958/958D enumerate the host adapters
-  by increasing bus number and device number.  To disable this feature, invoke
-  the AutoSCSI utility via Ctrl-B at system startup and select "Adapter
-  Configuration", "View/Modify Configuration", press Ctrl-F10, and then change
-  the "Use Bus And Device # For PCI Scanning Seq." option to OFF.
-
-  This driver will interrogate the setting of the PCI Scanning Sequence option
-  so as to recognize the host adapters in the same order as they are enumerated
-  by the host adapter's BIOS.
-
-o Enabling UltraSCSI Transfers
-
-  The BT-948/958/958D ship with their configuration set to "Factory Default"
-  settings that are conservative and do not allow for UltraSCSI speed to be
-  negotiated.  This results in fewer problems when these host adapters are
-  installed in systems with cabling or termination that is not sufficient for
-  UltraSCSI operation, or where existing SCSI devices do not properly respond
-  to synchronous transfer negotiation for UltraSCSI speed.  AutoSCSI may be
-  used to load "Optimum Performance" settings which allow UltraSCSI speed to be
-  negotiated with all devices, or UltraSCSI speed can be enabled on an
-  individual basis.  It is recommended that SCAM be manually disabled after the
-  "Optimum Performance" settings are loaded.
-
-
-				DRIVER OPTIONS
-
-BusLogic Driver Options may be specified either via the Linux Kernel Command
-Line or via the Loadable Kernel Module Installation Facility.  Driver Options
-for multiple host adapters may be specified either by separating the option
-strings by a semicolon, or by specifying multiple "BusLogic=" strings on the
-command line.  Individual option specifications for a single host adapter are
-separated by commas.  The Probing and Debugging Options apply to all host
-adapters whereas the remaining options apply individually only to the
-selected host adapter.
-
-The BusLogic Driver Probing Options comprise the following:
-
-IO:<integer>
-
-  The "IO:" option specifies an ISA I/O Address to be probed for a non-PCI
-  MultiMaster Host Adapter.  If neither "IO:" nor "NoProbeISA" options are
-  specified, then the standard list of BusLogic MultiMaster ISA I/O Addresses
-  will be probed (0x330, 0x334, 0x230, 0x234, 0x130, and 0x134).  Multiple
-  "IO:" options may be specified to precisely determine the I/O Addresses to
-  be probed, but the probe order will always follow the standard list.
-
-NoProbe
-
-  The "NoProbe" option disables all probing and therefore no BusLogic Host
-  Adapters will be detected.
-
-NoProbeISA
-
-  The "NoProbeISA" option disables probing of the standard BusLogic ISA I/O
-  Addresses and therefore only PCI MultiMaster and FlashPoint Host Adapters
-  will be detected.
-
-NoProbePCI
-
-  The "NoProbePCI" options disables the interrogation of PCI Configuration
-  Space and therefore only ISA Multimaster Host Adapters will be detected, as
-  well as PCI Multimaster Host Adapters that have their ISA Compatible I/O
-  Port set to "Primary" or "Alternate".
-
-NoSortPCI
-
-  The "NoSortPCI" option forces PCI MultiMaster Host Adapters to be
-  enumerated in the order provided by the PCI BIOS, ignoring any setting of
-  the AutoSCSI "Use Bus And Device # For PCI Scanning Seq." option.
-
-MultiMasterFirst
-
-  The "MultiMasterFirst" option forces MultiMaster Host Adapters to be probed
-  before FlashPoint Host Adapters.  By default, if both FlashPoint and PCI
-  MultiMaster Host Adapters are present, this driver will probe for
-  FlashPoint Host Adapters first unless the BIOS primary disk is controlled
-  by the first PCI MultiMaster Host Adapter, in which case MultiMaster Host
-  Adapters will be probed first.
-
-FlashPointFirst
-
-  The "FlashPointFirst" option forces FlashPoint Host Adapters to be probed
-  before MultiMaster Host Adapters.
-
-The BusLogic Driver Tagged Queuing Options allow for explicitly specifying
-the Queue Depth and whether Tagged Queuing is permitted for each Target
-Device (assuming that the Target Device supports Tagged Queuing).  The Queue
-Depth is the number of SCSI Commands that are allowed to be concurrently
-presented for execution (either to the Host Adapter or Target Device).  Note
-that explicitly enabling Tagged Queuing may lead to problems; the option to
-enable or disable Tagged Queuing is provided primarily to allow disabling
-Tagged Queuing on Target Devices that do not implement it correctly.  The
-following options are available:
-
-QueueDepth:<integer>
-
-  The "QueueDepth:" or QD:" option specifies the Queue Depth to use for all
-  Target Devices that support Tagged Queuing, as well as the maximum Queue
-  Depth for devices that do not support Tagged Queuing.  If no Queue Depth
-  option is provided, the Queue Depth will be determined automatically based
-  on the Host Adapter's Total Queue Depth and the number, type, speed, and
-  capabilities of the detected Target Devices.  For Host Adapters that
-  require ISA Bounce Buffers, the Queue Depth is automatically set by default
-  to BusLogic_TaggedQueueDepthBB or BusLogic_UntaggedQueueDepthBB to avoid
-  excessive preallocation of DMA Bounce Buffer memory.  Target Devices that
-  do not support Tagged Queuing always have their Queue Depth set to
-  BusLogic_UntaggedQueueDepth or BusLogic_UntaggedQueueDepthBB, unless a
-  lower Queue Depth option is provided.  A Queue Depth of 1 automatically
-  disables Tagged Queuing.
-
-QueueDepth:[<integer>,<integer>...]
-
-  The "QueueDepth:[...]" or "QD:[...]" option specifies the Queue Depth
-  individually for each Target Device.  If an <integer> is omitted, the
-  associated Target Device will have its Queue Depth selected automatically.
-
-TaggedQueuing:Default
-
-  The "TaggedQueuing:Default" or "TQ:Default" option permits Tagged Queuing
-  based on the firmware version of the BusLogic Host Adapter and based on
-  whether the Queue Depth allows queuing multiple commands.
-
-TaggedQueuing:Enable
-
-  The "TaggedQueuing:Enable" or "TQ:Enable" option enables Tagged Queuing for
-  all Target Devices on this Host Adapter, overriding any limitation that
-  would otherwise be imposed based on the Host Adapter firmware version.
-
-TaggedQueuing:Disable
-
-  The "TaggedQueuing:Disable" or "TQ:Disable" option disables Tagged Queuing
-  for all Target Devices on this Host Adapter.
-
-TaggedQueuing:<Target-Spec>
-
-  The "TaggedQueuing:<Target-Spec>" or "TQ:<Target-Spec>" option controls
-  Tagged Queuing individually for each Target Device.  <Target-Spec> is a
-  sequence of "Y", "N", and "X" characters.  "Y" enables Tagged Queuing, "N"
-  disables Tagged Queuing, and "X" accepts the default based on the firmware
-  version.  The first character refers to Target Device 0, the second to
-  Target Device 1, and so on; if the sequence of "Y", "N", and "X" characters
-  does not cover all the Target Devices, unspecified characters are assumed
-  to be "X".
-
-The BusLogic Driver Miscellaneous Options comprise the following:
-
-BusSettleTime:<seconds>
-
-  The "BusSettleTime:" or "BST:" option specifies the Bus Settle Time in
-  seconds.  The Bus Settle Time is the amount of time to wait between a Host
-  Adapter Hard Reset which initiates a SCSI Bus Reset and issuing any SCSI
-  Commands.  If unspecified, it defaults to BusLogic_DefaultBusSettleTime.
-
-InhibitTargetInquiry
-
-  The "InhibitTargetInquiry" option inhibits the execution of an Inquire
-  Target Devices or Inquire Installed Devices command on MultiMaster Host
-  Adapters.  This may be necessary with some older Target Devices that do not
-  respond correctly when Logical Units above 0 are addressed.
-
-The BusLogic Driver Debugging Options comprise the following:
-
-TraceProbe
-
-  The "TraceProbe" option enables tracing of Host Adapter Probing.
-
-TraceHardwareReset
-
-  The "TraceHardwareReset" option enables tracing of Host Adapter Hardware
-  Reset.
-
-TraceConfiguration
-
-  The "TraceConfiguration" option enables tracing of Host Adapter
-  Configuration.
-
-TraceErrors
-
-  The "TraceErrors" option enables tracing of SCSI Commands that return an
-  error from the Target Device.  The CDB and Sense Data will be printed for
-  each SCSI Command that fails.
-
-Debug
-
-  The "Debug" option enables all debugging options.
-
-The following examples demonstrate setting the Queue Depth for Target Devices
-1 and 2 on the first host adapter to 7 and 15, the Queue Depth for all Target
-Devices on the second host adapter to 31, and the Bus Settle Time on the
-second host adapter to 30 seconds.
-
-Linux Kernel Command Line:
-
-  linux BusLogic=QueueDepth:[,7,15];QueueDepth:31,BusSettleTime:30
-
-LILO Linux Boot Loader (in /etc/lilo.conf):
-
-  append = "BusLogic=QueueDepth:[,7,15];QueueDepth:31,BusSettleTime:30"
-
-INSMOD Loadable Kernel Module Installation Facility:
-
-  insmod BusLogic.o \
-      'BusLogic="QueueDepth:[,7,15];QueueDepth:31,BusSettleTime:30"'
-
-NOTE: Module Utilities 2.1.71 or later is required for correct parsing
-      of driver options containing commas.
-
-
-			      DRIVER INSTALLATION
-
-This distribution was prepared for Linux kernel version 2.0.35, but should be
-compatible with 2.0.4 or any later 2.0 series kernel.
-
-To install the new BusLogic SCSI driver, you may use the following commands,
-replacing "/usr/src" with wherever you keep your Linux kernel source tree:
-
-  cd /usr/src
-  tar -xvzf BusLogic-2.0.15.tar.gz
-  mv README.* LICENSE.* BusLogic.[ch] FlashPoint.c linux/drivers/scsi
-  patch -p0 < BusLogic.patch (only for 2.0.33 and below)
-  cd linux
-  make config
-  make zImage
-
-Then install "arch/x86/boot/zImage" as your standard kernel, run lilo if
-appropriate, and reboot.
-
-
-		      BUSLOGIC ANNOUNCEMENTS MAILING LIST
-
-The BusLogic Announcements Mailing List provides a forum for informing Linux
-users of new driver releases and other announcements regarding Linux support
-for BusLogic SCSI Host Adapters.  To join the mailing list, send a message to
-"buslogic-announce-request@dandelion.com" with the line "subscribe" in the
-message body.
diff --git a/Documentation/scsi/FlashPoint.rst b/Documentation/scsi/FlashPoint.rst
new file mode 100644
index 0000000..ef3c07e
--- /dev/null
+++ b/Documentation/scsi/FlashPoint.rst
@@ -0,0 +1,176 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===================================
+The BusLogic FlashPoint SCSI Driver
+===================================
+
+The BusLogic FlashPoint SCSI Host Adapters are now fully supported on Linux.
+The upgrade program described below has been officially terminated effective
+31 March 1997 since it is no longer needed.
+
+::
+
+  	  MYLEX INTRODUCES LINUX OPERATING SYSTEM SUPPORT FOR ITS
+  	      BUSLOGIC FLASHPOINT LINE OF SCSI HOST ADAPTERS
+
+
+  FREMONT, CA, -- October 8, 1996 -- Mylex Corporation has expanded Linux
+  operating system support to its BusLogic brand of FlashPoint Ultra SCSI
+  host adapters.  All of BusLogic's other SCSI host adapters, including the
+  MultiMaster line, currently support the Linux operating system.  Linux
+  drivers and information will be available on October 15th at
+  http://sourceforge.net/projects/dandelion/.
+
+  "Mylex is committed to supporting the Linux community," says Peter Shambora,
+  vice president of marketing for Mylex.  "We have supported Linux driver
+  development and provided technical support for our host adapters for several
+  years, and are pleased to now make our FlashPoint products available to this
+  user base."
+
+The Linux Operating System
+==========================
+
+Linux is a freely-distributed implementation of UNIX for Intel x86, Sun
+SPARC, SGI MIPS, Motorola 68k, Digital Alpha AXP and Motorola PowerPC
+machines.  It supports a wide range of software, including the X Window
+System, Emacs, and TCP/IP networking.  Further information is available at
+http://www.linux.org and http://www.ssc.com/.
+
+FlashPoint Host Adapters
+========================
+
+The FlashPoint family of Ultra SCSI host adapters, designed for workstation
+and file server environments, are available in narrow, wide, dual channel,
+and dual channel wide versions.  These adapters feature SeqEngine
+automation technology, which minimizes SCSI command overhead and reduces
+the number of interrupts generated to the CPU.
+
+About Mylex
+===========
+
+Mylex Corporation (NASDAQ/NM SYMBOL: MYLX), founded in 1983, is a leading
+producer of RAID technology and network management products.  The company
+produces high performance disk array (RAID) controllers, and complementary
+computer products for network servers, mass storage systems, workstations
+and system boards.  Through its wide range of RAID controllers and its
+BusLogic line of Ultra SCSI host adapter products, Mylex provides enabling
+intelligent I/O technologies that increase network management control,
+enhance CPU utilization, optimize I/O performance, and ensure data security
+and availability.  Products are sold globally through a network of OEMs,
+major distributors, VARs, and system integrators.  Mylex Corporation is
+headquartered at 34551 Ardenwood Blvd., Fremont, CA.
+
+Contact:
+========
+
+::
+
+  Peter Shambora
+  Vice President of Marketing
+  Mylex Corp.
+  510/796-6100
+  peters@mylex.com
+
+
+::
+
+			       ANNOUNCEMENT
+	       BusLogic FlashPoint LT/BT-948 Upgrade Program
+			      1 February 1996
+
+			  ADDITIONAL ANNOUNCEMENT
+	       BusLogic FlashPoint LW/BT-958 Upgrade Program
+			       14 June 1996
+
+  Ever since its introduction last October, the BusLogic FlashPoint LT has
+  been problematic for members of the Linux community, in that no Linux
+  drivers have been available for this new Ultra SCSI product.  Despite its
+  officially being positioned as a desktop workstation product, and not being
+  particularly well suited for a high performance multitasking operating
+  system like Linux, the FlashPoint LT has been touted by computer system
+  vendors as the latest thing, and has been sold even on many of their high
+  end systems, to the exclusion of the older MultiMaster products.  This has
+  caused grief for many people who inadvertently purchased a system expecting
+  that all BusLogic SCSI Host Adapters were supported by Linux, only to
+  discover that the FlashPoint was not supported and would not be for quite
+  some time, if ever.
+
+  After this problem was identified, BusLogic contacted its major OEM
+  customers to make sure the BT-946C/956C MultiMaster cards would still be
+  made available, and that Linux users who mistakenly ordered systems with
+  the FlashPoint would be able to upgrade to the BT-946C.  While this helped
+  many purchasers of new systems, it was only a partial solution to the
+  overall problem of FlashPoint support for Linux users.  It did nothing to
+  assist the people who initially purchased a FlashPoint for a supported
+  operating system and then later decided to run Linux, or those who had
+  ended up with a FlashPoint LT, believing it was supported, and were unable
+  to return it.
+
+  In the middle of December, I asked to meet with BusLogic's senior
+  management to discuss the issues related to Linux and free software support
+  for the FlashPoint.  Rumors of varying accuracy had been circulating
+  publicly about BusLogic's attitude toward the Linux community, and I felt
+  it was best that these issues be addressed directly.  I sent an email
+  message after 11pm one evening, and the meeting took place the next
+  afternoon.  Unfortunately, corporate wheels sometimes grind slowly,
+  especially when a company is being acquired, and so it's taken until now
+  before the details were completely determined and a public statement could
+  be made.
+
+  BusLogic is not prepared at this time to release the information necessary
+  for third parties to write drivers for the FlashPoint.  The only existing
+  FlashPoint drivers have been written directly by BusLogic Engineering, and
+  there is no FlashPoint documentation sufficiently detailed to allow outside
+  developers to write a driver without substantial assistance.  While there
+  are people at BusLogic who would rather not release the details of the
+  FlashPoint architecture at all, that debate has not yet been settled either
+  way.  In any event, even if documentation were available today it would
+  take quite a while for a usable driver to be written, especially since I'm
+  not convinced that the effort required would be worthwhile.
+
+  However, BusLogic does remain committed to providing a high performance
+  SCSI solution for the Linux community, and does not want to see anyone left
+  unable to run Linux because they have a Flashpoint LT.  Therefore, BusLogic
+  has put in place a direct upgrade program to allow any Linux user worldwide
+  to trade in their FlashPoint LT for the new BT-948 MultiMaster PCI Ultra
+  SCSI Host Adapter.  The BT-948 is the Ultra SCSI successor to the BT-946C
+  and has all the best features of both the BT-946C and FlashPoint LT,
+  including smart termination and a flash PROM for easy firmware updates, and
+  is of course compatible with the present Linux driver.  The price for this
+  upgrade has been set at US $45 plus shipping and handling, and the upgrade
+  program will be administered through BusLogic Technical Support, which can
+  be reached by electronic mail at techsup@buslogic.com, by Voice at +1 408
+  654-0760, or by FAX at +1 408 492-1542.
+
+  As of 14 June 1996, the original BusLogic FlashPoint LT to BT-948 upgrade
+  program has now been extended to encompass the FlashPoint LW Wide Ultra
+  SCSI Host Adapter.  Any Linux user worldwide may trade in their FlashPoint
+  LW (BT-950) for a BT-958 MultiMaster PCI Ultra SCSI Host Adapter.  The
+  price for this upgrade has been set at US $65 plus shipping and handling.
+
+  I was a beta test site for the BT-948/958, and versions 1.2.1 and 1.3.1 of
+  my BusLogic driver already included latent support for the BT-948/958.
+  Additional cosmetic support for the Ultra SCSI MultiMaster cards was added
+  subsequent releases.  As a result of this cooperative testing process,
+  several firmware bugs were found and corrected.  My heavily loaded Linux
+  test system provided an ideal environment for testing error recovery
+  processes that are much more rarely exercised in production systems, but
+  are crucial to overall system stability.  It was especially convenient
+  being able to work directly with their firmware engineer in demonstrating
+  the problems under control of the firmware debugging environment; things
+  sure have come a long way since the last time I worked on firmware for an
+  embedded system.  I am presently working on some performance testing and
+  expect to have some data to report in the not too distant future.
+
+  BusLogic asked me to send this announcement since a large percentage of the
+  questions regarding support for the FlashPoint have either been sent to me
+  directly via email, or have appeared in the Linux newsgroups in which I
+  participate.  To summarize, BusLogic is offering Linux users an upgrade
+  from the unsupported FlashPoint LT (BT-930) to the supported BT-948 for US
+  $45 plus shipping and handling, or from the unsupported FlashPoint LW
+  (BT-950) to the supported BT-958 for $65 plus shipping and handling.
+  Contact BusLogic Technical Support at techsup@buslogic.com or +1 408
+  654-0760 to take advantage of their offer.
+
+  		Leonard N. Zubkoff
+  		lnz@dandelion.com
diff --git a/Documentation/scsi/FlashPoint.txt b/Documentation/scsi/FlashPoint.txt
deleted file mode 100644
index 5b5f29c..0000000
--- a/Documentation/scsi/FlashPoint.txt
+++ /dev/null
@@ -1,163 +0,0 @@
-The BusLogic FlashPoint SCSI Host Adapters are now fully supported on Linux.
-The upgrade program described below has been officially terminated effective
-31 March 1997 since it is no longer needed.
-
-
-
-	  MYLEX INTRODUCES LINUX OPERATING SYSTEM SUPPORT FOR ITS
-	      BUSLOGIC FLASHPOINT LINE OF SCSI HOST ADAPTERS
-
-
-FREMONT, CA, -- October 8, 1996 -- Mylex Corporation has expanded Linux
-operating system support to its BusLogic brand of FlashPoint Ultra SCSI
-host adapters.  All of BusLogic's other SCSI host adapters, including the
-MultiMaster line, currently support the Linux operating system.  Linux
-drivers and information will be available on October 15th at
-http://sourceforge.net/projects/dandelion/.
-
-"Mylex is committed to supporting the Linux community," says Peter Shambora,
-vice president of marketing for Mylex.  "We have supported Linux driver
-development and provided technical support for our host adapters for several
-years, and are pleased to now make our FlashPoint products available to this
-user base."
-
-The Linux Operating System
-
-Linux is a freely-distributed implementation of UNIX for Intel x86, Sun
-SPARC, SGI MIPS, Motorola 68k, Digital Alpha AXP and Motorola PowerPC
-machines.  It supports a wide range of software, including the X Window
-System, Emacs, and TCP/IP networking.  Further information is available at
-http://www.linux.org and http://www.ssc.com/.
-
-FlashPoint Host Adapters
-
-The FlashPoint family of Ultra SCSI host adapters, designed for workstation
-and file server environments, are available in narrow, wide, dual channel,
-and dual channel wide versions.  These adapters feature SeqEngine
-automation technology, which minimizes SCSI command overhead and reduces
-the number of interrupts generated to the CPU.
-
-About Mylex
-
-Mylex Corporation (NASDAQ/NM SYMBOL: MYLX), founded in 1983, is a leading
-producer of RAID technology and network management products.  The company
-produces high performance disk array (RAID) controllers, and complementary
-computer products for network servers, mass storage systems, workstations
-and system boards.  Through its wide range of RAID controllers and its
-BusLogic line of Ultra SCSI host adapter products, Mylex provides enabling
-intelligent I/O technologies that increase network management control,
-enhance CPU utilization, optimize I/O performance, and ensure data security
-and availability.  Products are sold globally through a network of OEMs,
-major distributors, VARs, and system integrators.  Mylex Corporation is
-headquartered at 34551 Ardenwood Blvd., Fremont, CA.
-
-				   ####
-
-Contact:
-
-Peter Shambora
-Vice President of Marketing
-Mylex Corp.
-510/796-6100
-peters@mylex.com
-
-			       ANNOUNCEMENT
-	       BusLogic FlashPoint LT/BT-948 Upgrade Program
-			      1 February 1996
-
-			  ADDITIONAL ANNOUNCEMENT
-	       BusLogic FlashPoint LW/BT-958 Upgrade Program
-			       14 June 1996
-
-Ever since its introduction last October, the BusLogic FlashPoint LT has
-been problematic for members of the Linux community, in that no Linux
-drivers have been available for this new Ultra SCSI product.  Despite its
-officially being positioned as a desktop workstation product, and not being
-particularly well suited for a high performance multitasking operating
-system like Linux, the FlashPoint LT has been touted by computer system
-vendors as the latest thing, and has been sold even on many of their high
-end systems, to the exclusion of the older MultiMaster products.  This has
-caused grief for many people who inadvertently purchased a system expecting
-that all BusLogic SCSI Host Adapters were supported by Linux, only to
-discover that the FlashPoint was not supported and would not be for quite
-some time, if ever.
-
-After this problem was identified, BusLogic contacted its major OEM
-customers to make sure the BT-946C/956C MultiMaster cards would still be
-made available, and that Linux users who mistakenly ordered systems with
-the FlashPoint would be able to upgrade to the BT-946C.  While this helped
-many purchasers of new systems, it was only a partial solution to the
-overall problem of FlashPoint support for Linux users.  It did nothing to
-assist the people who initially purchased a FlashPoint for a supported
-operating system and then later decided to run Linux, or those who had
-ended up with a FlashPoint LT, believing it was supported, and were unable
-to return it.
-
-In the middle of December, I asked to meet with BusLogic's senior
-management to discuss the issues related to Linux and free software support
-for the FlashPoint.  Rumors of varying accuracy had been circulating
-publicly about BusLogic's attitude toward the Linux community, and I felt
-it was best that these issues be addressed directly.  I sent an email
-message after 11pm one evening, and the meeting took place the next
-afternoon.  Unfortunately, corporate wheels sometimes grind slowly,
-especially when a company is being acquired, and so it's taken until now
-before the details were completely determined and a public statement could
-be made.
-
-BusLogic is not prepared at this time to release the information necessary
-for third parties to write drivers for the FlashPoint.  The only existing
-FlashPoint drivers have been written directly by BusLogic Engineering, and
-there is no FlashPoint documentation sufficiently detailed to allow outside
-developers to write a driver without substantial assistance.  While there
-are people at BusLogic who would rather not release the details of the
-FlashPoint architecture at all, that debate has not yet been settled either
-way.  In any event, even if documentation were available today it would
-take quite a while for a usable driver to be written, especially since I'm
-not convinced that the effort required would be worthwhile.
-
-However, BusLogic does remain committed to providing a high performance
-SCSI solution for the Linux community, and does not want to see anyone left
-unable to run Linux because they have a Flashpoint LT.  Therefore, BusLogic
-has put in place a direct upgrade program to allow any Linux user worldwide
-to trade in their FlashPoint LT for the new BT-948 MultiMaster PCI Ultra
-SCSI Host Adapter.  The BT-948 is the Ultra SCSI successor to the BT-946C
-and has all the best features of both the BT-946C and FlashPoint LT,
-including smart termination and a flash PROM for easy firmware updates, and
-is of course compatible with the present Linux driver.  The price for this
-upgrade has been set at US $45 plus shipping and handling, and the upgrade
-program will be administered through BusLogic Technical Support, which can
-be reached by electronic mail at techsup@buslogic.com, by Voice at +1 408
-654-0760, or by FAX at +1 408 492-1542.
-
-As of 14 June 1996, the original BusLogic FlashPoint LT to BT-948 upgrade
-program has now been extended to encompass the FlashPoint LW Wide Ultra
-SCSI Host Adapter.  Any Linux user worldwide may trade in their FlashPoint
-LW (BT-950) for a BT-958 MultiMaster PCI Ultra SCSI Host Adapter.  The
-price for this upgrade has been set at US $65 plus shipping and handling.
-
-I was a beta test site for the BT-948/958, and versions 1.2.1 and 1.3.1 of
-my BusLogic driver already included latent support for the BT-948/958.
-Additional cosmetic support for the Ultra SCSI MultiMaster cards was added
-subsequent releases.  As a result of this cooperative testing process,
-several firmware bugs were found and corrected.  My heavily loaded Linux
-test system provided an ideal environment for testing error recovery
-processes that are much more rarely exercised in production systems, but
-are crucial to overall system stability.  It was especially convenient
-being able to work directly with their firmware engineer in demonstrating
-the problems under control of the firmware debugging environment; things
-sure have come a long way since the last time I worked on firmware for an
-embedded system.  I am presently working on some performance testing and
-expect to have some data to report in the not too distant future.
-
-BusLogic asked me to send this announcement since a large percentage of the
-questions regarding support for the FlashPoint have either been sent to me
-directly via email, or have appeared in the Linux newsgroups in which I
-participate.  To summarize, BusLogic is offering Linux users an upgrade
-from the unsupported FlashPoint LT (BT-930) to the supported BT-948 for US
-$45 plus shipping and handling, or from the unsupported FlashPoint LW
-(BT-950) to the supported BT-958 for $65 plus shipping and handling.
-Contact BusLogic Technical Support at techsup@buslogic.com or +1 408
-654-0760 to take advantage of their offer.
-
-		Leonard N. Zubkoff
-		lnz@dandelion.com
diff --git a/Documentation/scsi/NinjaSCSI.rst b/Documentation/scsi/NinjaSCSI.rst
new file mode 100644
index 0000000..999a6ed
--- /dev/null
+++ b/Documentation/scsi/NinjaSCSI.rst
@@ -0,0 +1,164 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================================
+WorkBiT NinjaSCSI-3/32Bi driver for Linux
+=========================================
+
+1. Comment
+==========
+
+This is Workbit corp.'s(http://www.workbit.co.jp/) NinjaSCSI-3
+for Linux.
+
+2. My Linux environment
+=======================
+
+:Linux kernel: 2.4.7 / 2.2.19
+:pcmcia-cs:    3.1.27
+:gcc:          gcc-2.95.4
+:PC card:      I-O data PCSC-F (NinjaSCSI-3),
+               I-O data CBSC-II in 16 bit mode (NinjaSCSI-32Bi)
+:SCSI device:  I-O data CDPS-PX24 (CD-ROM drive),
+               Media Intelligent MMO-640GT (Optical disk drive)
+
+3. Install
+==========
+
+(a) Check your PC card is true "NinjaSCSI-3" card.
+
+    If you installed pcmcia-cs already, pcmcia reports your card as UNKNOWN
+    card, and write ["WBT", "NinjaSCSI-3", "R1.0"] or some other string to
+    your console or log file.
+
+    You can also use "cardctl" program (this program is in pcmcia-cs source
+    code) to get more info.
+
+    ::
+
+	# cat /var/log/messages
+	...
+	Jan  2 03:45:06 lindberg cardmgr[78]: unsupported card in socket 1
+	Jan  2 03:45:06 lindberg cardmgr[78]:   product info: "WBT", "NinjaSCSI-3", "R1.0"
+	...
+	# cardctl ident
+	Socket 0:
+	  no product info available
+	Socket 1:
+	  product info: "IO DATA", "CBSC16       ", "1"
+
+
+(b) Get the Linux kernel source, and extract it to /usr/src.
+    Because the NinjaSCSI driver requires some SCSI header files in Linux 
+    kernel source, I recommend rebuilding your kernel; this eliminates 
+    some versioning problems.
+
+    ::
+
+	$ cd /usr/src
+	$ tar -zxvf linux-x.x.x.tar.gz
+	$ cd linux
+	$ make config
+	...
+
+(c) If you use this driver with Kernel 2.2, unpack pcmcia-cs in some directory
+    and make & install. This driver requires the pcmcia-cs header file.
+
+    ::
+
+	$ cd /usr/src
+	$ tar zxvf cs-pcmcia-cs-3.x.x.tar.gz
+	...
+
+(d) Extract this driver's archive somewhere, and edit Makefile, then do make::
+
+	$ tar -zxvf nsp_cs-x.x.tar.gz
+	$ cd nsp_cs-x.x
+	$ emacs Makefile
+	...
+	$ make
+
+(e) Copy nsp_cs.ko to suitable place, like /lib/modules/<Kernel version>/pcmcia/ .
+
+(f) Add these lines to /etc/pcmcia/config .
+
+    If you use pcmcia-cs-3.1.8 or later, we can use "nsp_cs.conf" file.
+    So, you don't need to edit file. Just copy to /etc/pcmcia/ .
+
+    ::
+
+	device "nsp_cs"
+	  class "scsi" module "nsp_cs"
+
+	card "WorkBit NinjaSCSI-3"
+	  version "WBT", "NinjaSCSI-3", "R1.0"
+	  bind "nsp_cs"
+
+	card "WorkBit NinjaSCSI-32Bi (16bit)"
+	  version "WORKBIT", "UltraNinja-16", "1"
+	  bind "nsp_cs"
+
+	# OEM
+	card "WorkBit NinjaSCSI-32Bi (16bit) / IO-DATA"
+	  version "IO DATA", "CBSC16       ", "1"
+	  bind "nsp_cs"
+
+	# OEM
+	card "WorkBit NinjaSCSI-32Bi (16bit) / KME-1"
+	  version "KME    ", "SCSI-CARD-001", "1"
+	  bind "nsp_cs"
+	card "WorkBit NinjaSCSI-32Bi (16bit) / KME-2"
+	  version "KME    ", "SCSI-CARD-002", "1"
+	  bind "nsp_cs"
+	card "WorkBit NinjaSCSI-32Bi (16bit) / KME-3"
+	  version "KME    ", "SCSI-CARD-003", "1"
+	  bind "nsp_cs"
+	card "WorkBit NinjaSCSI-32Bi (16bit) / KME-4"
+	  version "KME    ", "SCSI-CARD-004", "1"
+	  bind "nsp_cs"
+
+(f) Start (or restart) pcmcia-cs::
+
+	# /etc/rc.d/rc.pcmcia start        (BSD style)
+
+    or::
+
+	# /etc/init.d/pcmcia start         (SYSV style)
+
+
+4. History
+==========
+
+See README.nin_cs .
+
+5. Caution
+==========
+
+If you eject card when doing some operation for your SCSI device or suspend
+your computer, you encount some *BAD* error like disk crash.
+
+It works good when I using this driver right way. But I'm not guarantee
+your data. Please backup your data when you use this driver.
+
+6. Known Bugs
+=============
+
+In 2.4 kernel, you can't use 640MB Optical disk. This error comes from
+high level SCSI driver.
+
+7. Testing
+==========
+
+Please send me some reports(bug reports etc..) of this software.
+When you send report, please tell me these or more.
+
+	- card name
+	- kernel version
+	- your SCSI device name(hard drive, CD-ROM, etc...)
+
+8. Copyright
+============
+
+ See GPL.
+
+
+2001/08/08 yokota@netlab.is.tsukuba.ac.jp <YOKOTA Hiroshi>
diff --git a/Documentation/scsi/NinjaSCSI.txt b/Documentation/scsi/NinjaSCSI.txt
deleted file mode 100644
index ac8db8c..0000000
--- a/Documentation/scsi/NinjaSCSI.txt
+++ /dev/null
@@ -1,128 +0,0 @@
-
-         WorkBiT NinjaSCSI-3/32Bi driver for Linux
-
-1. Comment
- This is Workbit corp.'s(http://www.workbit.co.jp/) NinjaSCSI-3
-for Linux.
-
-2. My Linux environment
-Linux kernel: 2.4.7 / 2.2.19
-pcmcia-cs:    3.1.27
-gcc:          gcc-2.95.4
-PC card:      I-O data PCSC-F (NinjaSCSI-3)
-              I-O data CBSC-II in 16 bit mode (NinjaSCSI-32Bi)
-SCSI device:  I-O data CDPS-PX24 (CD-ROM drive)
-              Media Intelligent MMO-640GT (Optical disk drive)
-
-3. Install
-[1] Check your PC card is true "NinjaSCSI-3" card.
-    If you installed pcmcia-cs already, pcmcia reports your card as UNKNOWN
-    card, and write ["WBT", "NinjaSCSI-3", "R1.0"] or some other string to
-    your console or log file.
-    You can also use "cardctl" program (this program is in pcmcia-cs source
-    code) to get more info.
-
-# cat /var/log/messages
-...
-Jan  2 03:45:06 lindberg cardmgr[78]: unsupported card in socket 1
-Jan  2 03:45:06 lindberg cardmgr[78]:   product info: "WBT", "NinjaSCSI-3", "R1.0"
-...
-# cardctl ident
-Socket 0:
-  no product info available
-Socket 1:
-  product info: "IO DATA", "CBSC16       ", "1"
-
-
-[2] Get the Linux kernel source, and extract it to /usr/src.
-    Because the NinjaSCSI driver requires some SCSI header files in Linux 
-    kernel source, I recommend rebuilding your kernel; this eliminates 
-    some versioning problems.
-$ cd /usr/src
-$ tar -zxvf linux-x.x.x.tar.gz
-$ cd linux
-$ make config
-...
-
-[3] If you use this driver with Kernel 2.2, unpack pcmcia-cs in some directory
-    and make & install. This driver requires the pcmcia-cs header file.
-$ cd /usr/src
-$ tar zxvf cs-pcmcia-cs-3.x.x.tar.gz
-...
-
-[4] Extract this driver's archive somewhere, and edit Makefile, then do make.
-$ tar -zxvf nsp_cs-x.x.tar.gz
-$ cd nsp_cs-x.x
-$ emacs Makefile
-...
-$ make
-
-[5] Copy nsp_cs.ko to suitable place, like /lib/modules/<Kernel version>/pcmcia/ .
-
-[6] Add these lines to /etc/pcmcia/config .
-    If you use pcmcia-cs-3.1.8 or later, we can use "nsp_cs.conf" file.
-    So, you don't need to edit file. Just copy to /etc/pcmcia/ .
-
--------------------------------------
-device "nsp_cs"
-  class "scsi" module "nsp_cs"
-
-card "WorkBit NinjaSCSI-3"
-  version "WBT", "NinjaSCSI-3", "R1.0"
-  bind "nsp_cs"
-
-card "WorkBit NinjaSCSI-32Bi (16bit)"
-  version "WORKBIT", "UltraNinja-16", "1"
-  bind "nsp_cs"
-
-# OEM
-card "WorkBit NinjaSCSI-32Bi (16bit) / IO-DATA"
-  version "IO DATA", "CBSC16       ", "1"
-  bind "nsp_cs"
-
-# OEM
-card "WorkBit NinjaSCSI-32Bi (16bit) / KME-1"
-  version "KME    ", "SCSI-CARD-001", "1"
-  bind "nsp_cs"
-card "WorkBit NinjaSCSI-32Bi (16bit) / KME-2"
-  version "KME    ", "SCSI-CARD-002", "1"
-  bind "nsp_cs"
-card "WorkBit NinjaSCSI-32Bi (16bit) / KME-3"
-  version "KME    ", "SCSI-CARD-003", "1"
-  bind "nsp_cs"
-card "WorkBit NinjaSCSI-32Bi (16bit) / KME-4"
-  version "KME    ", "SCSI-CARD-004", "1"
-  bind "nsp_cs"
--------------------------------------
-
-[7] Start (or restart) pcmcia-cs.
-# /etc/rc.d/rc.pcmcia start        (BSD style)
-or
-# /etc/init.d/pcmcia start         (SYSV style)
-
-
-4. History
-See README.nin_cs .
-
-5. Caution
- If you eject card when doing some operation for your SCSI device or suspend
-your computer, you encount some *BAD* error like disk crash.
- It works good when I using this driver right way. But I'm not guarantee
-your data. Please backup your data when you use this driver.
-
-6. Known Bugs
- In 2.4 kernel, you can't use 640MB Optical disk. This error comes from
-high level SCSI driver.
-
-7. Testing
- Please send me some reports(bug reports etc..) of this software.
-When you send report, please tell me these or more.
-	card name
-	kernel version
-	your SCSI device name(hard drive, CD-ROM, etc...)
-
-8. Copyright
- See GPL.
-
-
-2001/08/08 yokota@netlab.is.tsukuba.ac.jp <YOKOTA Hiroshi>
diff --git a/Documentation/scsi/aacraid.rst b/Documentation/scsi/aacraid.rst
new file mode 100644
index 0000000..1904674
--- /dev/null
+++ b/Documentation/scsi/aacraid.rst
@@ -0,0 +1,177 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===================================
+AACRAID Driver for Linux (take two)
+===================================
+
+Introduction
+============
+The aacraid driver adds support for Adaptec (http://www.adaptec.com)
+RAID controllers. This is a major rewrite from the original
+Adaptec supplied driver. It has significantly cleaned up both the code
+and the running binary size (the module is less than half the size of
+the original).
+
+Supported Cards/Chipsets
+========================
+
+	===================	=======	=======================================
+	PCI ID (pci.ids)	OEM	Product
+	===================	=======	=======================================
+	9005:0285:9005:0285	Adaptec	2200S (Vulcan)
+	9005:0285:9005:0286	Adaptec	2120S (Crusader)
+	9005:0285:9005:0287	Adaptec	2200S (Vulcan-2m)
+	9005:0285:9005:0288	Adaptec	3230S (Harrier)
+	9005:0285:9005:0289	Adaptec	3240S (Tornado)
+	9005:0285:9005:028a	Adaptec	2020ZCR (Skyhawk)
+	9005:0285:9005:028b	Adaptec	2025ZCR (Terminator)
+	9005:0286:9005:028c	Adaptec	2230S (Lancer)
+	9005:0286:9005:028c	Adaptec	2230SLP (Lancer)
+	9005:0286:9005:028d	Adaptec	2130S (Lancer)
+	9005:0285:9005:028e	Adaptec	2020SA (Skyhawk)
+	9005:0285:9005:028f	Adaptec	2025SA (Terminator)
+	9005:0285:9005:0290	Adaptec	2410SA (Jaguar)
+	9005:0285:103c:3227	Adaptec	2610SA (Bearcat HP release)
+	9005:0285:9005:0293	Adaptec	21610SA (Corsair-16)
+	9005:0285:9005:0296	Adaptec	2240S (SabreExpress)
+	9005:0285:9005:0292	Adaptec	2810SA (Corsair-8)
+	9005:0285:9005:0297	Adaptec	4005 (AvonPark)
+	9005:0285:9005:0298	Adaptec	4000 (BlackBird)
+	9005:0285:9005:0299	Adaptec	4800SAS (Marauder-X)
+	9005:0285:9005:029a	Adaptec	4805SAS (Marauder-E)
+	9005:0286:9005:029b	Adaptec	2820SA (Intruder)
+	9005:0286:9005:029c	Adaptec	2620SA (Intruder)
+	9005:0286:9005:029d	Adaptec	2420SA (Intruder HP release)
+	9005:0286:9005:02ac	Adaptec	1800 (Typhoon44)
+	9005:0285:9005:02b5	Adaptec	5445 (Voodoo44)
+	9005:0285:15d9:02b5	SMC	AOC-USAS-S4i
+	9005:0285:9005:02b6	Adaptec	5805 (Voodoo80)
+	9005:0285:15d9:02b6	SMC	AOC-USAS-S8i
+	9005:0285:9005:02b7	Adaptec	5085 (Voodoo08)
+	9005:0285:9005:02bb	Adaptec	3405 (Marauder40LP)
+	9005:0285:9005:02bc	Adaptec	3805 (Marauder80LP)
+	9005:0285:9005:02c7	Adaptec	3085 (Marauder08ELP)
+	9005:0285:9005:02bd	Adaptec	31205 (Marauder120)
+	9005:0285:9005:02be	Adaptec	31605 (Marauder160)
+	9005:0285:9005:02c3	Adaptec	51205 (Voodoo120)
+	9005:0285:9005:02c4	Adaptec	51605 (Voodoo160)
+	9005:0285:15d9:02c9	SMC	AOC-USAS-S4iR
+	9005:0285:15d9:02ca	SMC	AOC-USAS-S8iR
+	9005:0285:9005:02ce	Adaptec	51245 (Voodoo124)
+	9005:0285:9005:02cf	Adaptec	51645 (Voodoo164)
+	9005:0285:9005:02d0	Adaptec	52445 (Voodoo244)
+	9005:0285:9005:02d1	Adaptec	5405 (Voodoo40)
+	9005:0285:15d9:02d2	SMC	AOC-USAS-S8i-LP
+	9005:0285:15d9:02d3	SMC	AOC-USAS-S8iR-LP
+	9005:0285:9005:02d4	Adaptec	ASR-2045 (Voodoo04 Lite)
+	9005:0285:9005:02d5	Adaptec	ASR-2405 (Voodoo40 Lite)
+	9005:0285:9005:02d6	Adaptec	ASR-2445 (Voodoo44 Lite)
+	9005:0285:9005:02d7	Adaptec	ASR-2805 (Voodoo80 Lite)
+	9005:0285:9005:02d8	Adaptec	5405Z (Voodoo40 BLBU)
+	9005:0285:9005:02d9	Adaptec	5445Z (Voodoo44 BLBU)
+	9005:0285:9005:02da	Adaptec	5805Z (Voodoo80 BLBU)
+	1011:0046:9005:0364	Adaptec	5400S (Mustang)
+	1011:0046:9005:0365	Adaptec	5400S (Mustang)
+	9005:0287:9005:0800	Adaptec	Themisto (Jupiter)
+	9005:0200:9005:0200	Adaptec	Themisto (Jupiter)
+	9005:0286:9005:0800	Adaptec	Callisto (Jupiter)
+	1011:0046:9005:1364	Dell	PERC 2/QC (Quad Channel, Mustang)
+	1011:0046:9005:1365	Dell	PERC 2/QC (Quad Channel, Mustang)
+	1028:0001:1028:0001	Dell	PERC 2/Si (Iguana)
+	1028:0003:1028:0003	Dell	PERC 3/Si (SlimFast)
+	1028:0002:1028:0002	Dell	PERC 3/Di (Opal)
+	1028:0004:1028:0004	Dell	PERC 3/SiF (Iguana)
+	1028:0004:1028:00d0	Dell	PERC 3/DiF (Iguana)
+	1028:0002:1028:00d1	Dell	PERC 3/DiV (Viper)
+	1028:0002:1028:00d9	Dell	PERC 3/DiL (Lexus)
+	1028:000a:1028:0106	Dell	PERC 3/DiJ (Jaguar)
+	1028:000a:1028:011b	Dell	PERC 3/DiD (Dagger)
+	1028:000a:1028:0121	Dell	PERC 3/DiB (Boxster)
+	9005:0285:1028:0287	Dell	PERC 320/DC (Vulcan)
+	9005:0285:1028:0291	Dell	CERC 2 (DellCorsair)
+	1011:0046:103c:10c2	HP	NetRAID-4M (Mustang)
+	9005:0285:17aa:0286	Legend	S220 (Crusader)
+	9005:0285:17aa:0287	Legend	S230 (Vulcan)
+	9005:0285:9005:0290	IBM	ServeRAID 7t (Jaguar)
+	9005:0285:1014:02F2	IBM	ServeRAID 8i (AvonPark)
+	9005:0286:1014:9540	IBM	ServeRAID 8k/8k-l4 (AuroraLite)
+	9005:0286:1014:9580	IBM	ServeRAID 8k/8k-l8 (Aurora)
+	9005:0285:1014:034d	IBM	ServeRAID 8s (Marauder-E)
+	9005:0286:9005:029e	ICP	ICP9024RO (Lancer)
+	9005:0286:9005:029f	ICP	ICP9014RO (Lancer)
+	9005:0286:9005:02a0	ICP	ICP9047MA (Lancer)
+	9005:0286:9005:02a1	ICP	ICP9087MA (Lancer)
+	9005:0285:9005:02a4	ICP	ICP9085LI (Marauder-X)
+	9005:0285:9005:02a5	ICP	ICP5085BR (Marauder-E)
+	9005:0286:9005:02a6	ICP	ICP9067MA (Intruder-6)
+	9005:0285:9005:02b2	ICP	(Voodoo 8 internal 8 external)
+	9005:0285:9005:02b8	ICP	ICP5445SL (Voodoo44)
+	9005:0285:9005:02b9	ICP	ICP5085SL (Voodoo80)
+	9005:0285:9005:02ba	ICP	ICP5805SL (Voodoo08)
+	9005:0285:9005:02bf	ICP	ICP5045BL (Marauder40LP)
+	9005:0285:9005:02c0	ICP	ICP5085BL (Marauder80LP)
+	9005:0285:9005:02c8	ICP	ICP5805BL (Marauder08ELP)
+	9005:0285:9005:02c1	ICP	ICP5125BR (Marauder120)
+	9005:0285:9005:02c2	ICP	ICP5165BR (Marauder160)
+	9005:0285:9005:02c5	ICP	ICP5125SL (Voodoo120)
+	9005:0285:9005:02c6	ICP	ICP5165SL (Voodoo160)
+	9005:0286:9005:02ab		(Typhoon40)
+	9005:0286:9005:02ad		(Aurora ARK)
+	9005:0286:9005:02ae		(Aurora Lite ARK)
+	9005:0285:9005:02b0		(Sunrise Lake ARK)
+	9005:0285:9005:02b1	Adaptec	(Voodoo 8 internal 8 external)
+	9005:0285:108e:7aac	SUN	STK RAID REM (Voodoo44 Coyote)
+	9005:0285:108e:0286	SUN	STK RAID INT (Cougar)
+	9005:0285:108e:0287	SUN	STK RAID EXT (Prometheus)
+	9005:0285:108e:7aae	SUN	STK RAID EM (Narvi)
+	===================	=======	=======================================
+
+People
+======
+
+Alan Cox <alan@lxorguk.ukuu.org.uk>
+
+Christoph Hellwig <hch@infradead.org>
+
+- updates for new-style PCI probing and SCSI host registration,
+  small cleanups/fixes
+
+Matt Domsch <matt_domsch@dell.com>
+
+- revision ioctl, adapter messages
+
+Deanna Bonds
+
+- non-DASD support, PAE fibs and 64 bit, added new adaptec controllers
+  added new ioctls, changed scsi interface to use new error handler,
+  increased the number of fibs and outstanding commands to a container
+- fixed 64bit and 64G memory model, changed confusing naming convention
+  where fibs that go to the hardware are consistently called hw_fibs and
+  not just fibs like the name of the driver tracking structure
+
+Mark Salyzyn <Mark_Salyzyn@adaptec.com>
+
+- Fixed panic issues and added some new product ids for upcoming hbas.
+- Performance tuning, card failover and bug mitigations.
+
+Achim Leubner <Achim_Leubner@adaptec.com>
+
+- Original Driver
+
+-------------------------
+
+Adaptec Unix OEM Product Group
+
+Mailing List
+============
+
+linux-scsi@vger.kernel.org (Interested parties troll here)
+Also note this is very different to Brian's original driver
+so don't expect him to support it.
+
+Adaptec does support this driver.  Contact Adaptec tech support or
+aacraid@adaptec.com
+
+Original by Brian Boerner February 2001
+
+Rewritten by Alan Cox, November 2001
diff --git a/Documentation/scsi/aacraid.txt b/Documentation/scsi/aacraid.txt
deleted file mode 100644
index 30f643f..0000000
--- a/Documentation/scsi/aacraid.txt
+++ /dev/null
@@ -1,150 +0,0 @@
-AACRAID Driver for Linux (take two)
-
-Introduction
--------------------------
-The aacraid driver adds support for Adaptec (http://www.adaptec.com)
-RAID controllers. This is a major rewrite from the original
-Adaptec supplied driver. It has significantly cleaned up both the code
-and the running binary size (the module is less than half the size of
-the original).
-
-Supported Cards/Chipsets
--------------------------
-	PCI ID (pci.ids)	OEM	Product
-	9005:0285:9005:0285	Adaptec	2200S (Vulcan)
-	9005:0285:9005:0286	Adaptec	2120S (Crusader)
-	9005:0285:9005:0287	Adaptec	2200S (Vulcan-2m)
-	9005:0285:9005:0288	Adaptec	3230S (Harrier)
-	9005:0285:9005:0289	Adaptec	3240S (Tornado)
-	9005:0285:9005:028a	Adaptec	2020ZCR (Skyhawk)
-	9005:0285:9005:028b	Adaptec	2025ZCR (Terminator)
-	9005:0286:9005:028c	Adaptec	2230S (Lancer)
-	9005:0286:9005:028c	Adaptec	2230SLP (Lancer)
-	9005:0286:9005:028d	Adaptec	2130S (Lancer)
-	9005:0285:9005:028e	Adaptec	2020SA (Skyhawk)
-	9005:0285:9005:028f	Adaptec	2025SA (Terminator)
-	9005:0285:9005:0290	Adaptec	2410SA (Jaguar)
-	9005:0285:103c:3227	Adaptec	2610SA (Bearcat HP release)
-	9005:0285:9005:0293	Adaptec	21610SA (Corsair-16)
-	9005:0285:9005:0296	Adaptec	2240S (SabreExpress)
-	9005:0285:9005:0292	Adaptec	2810SA (Corsair-8)
-	9005:0285:9005:0297	Adaptec	4005 (AvonPark)
-	9005:0285:9005:0298	Adaptec	4000 (BlackBird)
-	9005:0285:9005:0299	Adaptec	4800SAS (Marauder-X)
-	9005:0285:9005:029a	Adaptec	4805SAS (Marauder-E)
-	9005:0286:9005:029b	Adaptec	2820SA (Intruder)
-	9005:0286:9005:029c	Adaptec	2620SA (Intruder)
-	9005:0286:9005:029d	Adaptec	2420SA (Intruder HP release)
-	9005:0286:9005:02ac	Adaptec	1800 (Typhoon44)
-	9005:0285:9005:02b5	Adaptec	5445 (Voodoo44)
-	9005:0285:15d9:02b5	SMC	AOC-USAS-S4i
-	9005:0285:9005:02b6	Adaptec	5805 (Voodoo80)
-	9005:0285:15d9:02b6	SMC	AOC-USAS-S8i
-	9005:0285:9005:02b7	Adaptec	5085 (Voodoo08)
-	9005:0285:9005:02bb	Adaptec	3405 (Marauder40LP)
-	9005:0285:9005:02bc	Adaptec	3805 (Marauder80LP)
-	9005:0285:9005:02c7	Adaptec	3085 (Marauder08ELP)
-	9005:0285:9005:02bd	Adaptec	31205 (Marauder120)
-	9005:0285:9005:02be	Adaptec	31605 (Marauder160)
-	9005:0285:9005:02c3	Adaptec	51205 (Voodoo120)
-	9005:0285:9005:02c4	Adaptec	51605 (Voodoo160)
-	9005:0285:15d9:02c9	SMC	AOC-USAS-S4iR
-	9005:0285:15d9:02ca	SMC	AOC-USAS-S8iR
-	9005:0285:9005:02ce	Adaptec	51245 (Voodoo124)
-	9005:0285:9005:02cf	Adaptec	51645 (Voodoo164)
-	9005:0285:9005:02d0	Adaptec	52445 (Voodoo244)
-	9005:0285:9005:02d1	Adaptec	5405 (Voodoo40)
-	9005:0285:15d9:02d2	SMC	AOC-USAS-S8i-LP
-	9005:0285:15d9:02d3	SMC	AOC-USAS-S8iR-LP
-	9005:0285:9005:02d4	Adaptec	ASR-2045 (Voodoo04 Lite)
-	9005:0285:9005:02d5	Adaptec	ASR-2405 (Voodoo40 Lite)
-	9005:0285:9005:02d6	Adaptec	ASR-2445 (Voodoo44 Lite)
-	9005:0285:9005:02d7	Adaptec	ASR-2805 (Voodoo80 Lite)
-	9005:0285:9005:02d8	Adaptec	5405Z (Voodoo40 BLBU)
-	9005:0285:9005:02d9	Adaptec	5445Z (Voodoo44 BLBU)
-	9005:0285:9005:02da	Adaptec	5805Z (Voodoo80 BLBU)
-	1011:0046:9005:0364	Adaptec	5400S (Mustang)
-	1011:0046:9005:0365	Adaptec	5400S (Mustang)
-	9005:0287:9005:0800	Adaptec	Themisto (Jupiter)
-	9005:0200:9005:0200	Adaptec	Themisto (Jupiter)
-	9005:0286:9005:0800	Adaptec	Callisto (Jupiter)
-	1011:0046:9005:1364	Dell	PERC 2/QC (Quad Channel, Mustang)
-	1011:0046:9005:1365	Dell	PERC 2/QC (Quad Channel, Mustang)
-	1028:0001:1028:0001	Dell	PERC 2/Si (Iguana)
-	1028:0003:1028:0003	Dell	PERC 3/Si (SlimFast)
-	1028:0002:1028:0002	Dell	PERC 3/Di (Opal)
-	1028:0004:1028:0004	Dell	PERC 3/SiF (Iguana)
-	1028:0004:1028:00d0	Dell	PERC 3/DiF (Iguana)
-	1028:0002:1028:00d1	Dell	PERC 3/DiV (Viper)
-	1028:0002:1028:00d9	Dell	PERC 3/DiL (Lexus)
-	1028:000a:1028:0106	Dell	PERC 3/DiJ (Jaguar)
-	1028:000a:1028:011b	Dell	PERC 3/DiD (Dagger)
-	1028:000a:1028:0121	Dell	PERC 3/DiB (Boxster)
-	9005:0285:1028:0287	Dell	PERC 320/DC (Vulcan)
-	9005:0285:1028:0291	Dell	CERC 2 (DellCorsair)
-	1011:0046:103c:10c2	HP	NetRAID-4M (Mustang)
-	9005:0285:17aa:0286	Legend	S220 (Crusader)
-	9005:0285:17aa:0287	Legend	S230 (Vulcan)
-	9005:0285:9005:0290	IBM	ServeRAID 7t (Jaguar)
-	9005:0285:1014:02F2	IBM	ServeRAID 8i (AvonPark)
-	9005:0286:1014:9540	IBM	ServeRAID 8k/8k-l4 (AuroraLite)
-	9005:0286:1014:9580	IBM	ServeRAID 8k/8k-l8 (Aurora)
-	9005:0285:1014:034d	IBM	ServeRAID 8s (Marauder-E)
-	9005:0286:9005:029e	ICP	ICP9024RO (Lancer)
-	9005:0286:9005:029f	ICP	ICP9014RO (Lancer)
-	9005:0286:9005:02a0	ICP	ICP9047MA (Lancer)
-	9005:0286:9005:02a1	ICP	ICP9087MA (Lancer)
-	9005:0285:9005:02a4	ICP	ICP9085LI (Marauder-X)
-	9005:0285:9005:02a5	ICP	ICP5085BR (Marauder-E)
-	9005:0286:9005:02a6	ICP	ICP9067MA (Intruder-6)
-	9005:0285:9005:02b2	ICP	(Voodoo 8 internal 8 external)
-	9005:0285:9005:02b8	ICP	ICP5445SL (Voodoo44)
-	9005:0285:9005:02b9	ICP	ICP5085SL (Voodoo80)
-	9005:0285:9005:02ba	ICP	ICP5805SL (Voodoo08)
-	9005:0285:9005:02bf	ICP	ICP5045BL (Marauder40LP)
-	9005:0285:9005:02c0	ICP	ICP5085BL (Marauder80LP)
-	9005:0285:9005:02c8	ICP	ICP5805BL (Marauder08ELP)
-	9005:0285:9005:02c1	ICP	ICP5125BR (Marauder120)
-	9005:0285:9005:02c2	ICP	ICP5165BR (Marauder160)
-	9005:0285:9005:02c5	ICP	ICP5125SL (Voodoo120)
-	9005:0285:9005:02c6	ICP	ICP5165SL (Voodoo160)
-	9005:0286:9005:02ab		(Typhoon40)
-	9005:0286:9005:02ad		(Aurora ARK)
-	9005:0286:9005:02ae		(Aurora Lite ARK)
-	9005:0285:9005:02b0		(Sunrise Lake ARK)
-	9005:0285:9005:02b1	Adaptec	(Voodoo 8 internal 8 external)
-	9005:0285:108e:7aac	SUN	STK RAID REM (Voodoo44 Coyote)
-	9005:0285:108e:0286	SUN	STK RAID INT (Cougar)
-	9005:0285:108e:0287	SUN	STK RAID EXT (Prometheus)
-	9005:0285:108e:7aae	SUN	STK RAID EM (Narvi)
-
-People
--------------------------
-Alan Cox <alan@lxorguk.ukuu.org.uk>
-Christoph Hellwig <hch@infradead.org>	(updates for new-style PCI probing and SCSI host registration,
-					 small cleanups/fixes)
-Matt Domsch <matt_domsch@dell.com>	(revision ioctl, adapter messages)
-Deanna Bonds                            (non-DASD support, PAE fibs and 64 bit, added new adaptec controllers
-					 added new ioctls, changed scsi interface to use new error handler,
-					 increased the number of fibs and outstanding commands to a container)
-
-					(fixed 64bit and 64G memory model, changed confusing naming convention
-					 where fibs that go to the hardware are consistently called hw_fibs and
-					 not just fibs like the name of the driver tracking structure)
-Mark Salyzyn <Mark_Salyzyn@adaptec.com> Fixed panic issues and added some new product ids for upcoming hbas. Performance tuning, card failover and bug mitigations.
-Achim Leubner <Achim_Leubner@adaptec.com>
-
-Original Driver
--------------------------
-Adaptec Unix OEM Product Group
-
-Mailing List
--------------------------
-linux-scsi@vger.kernel.org (Interested parties troll here)
-Also note this is very different to Brian's original driver
-so don't expect him to support it.
-Adaptec does support this driver.  Contact Adaptec tech support or
-aacraid@adaptec.com
-
-Original by Brian Boerner February 2001
-Rewritten by Alan Cox, November 2001
diff --git a/Documentation/scsi/advansys.rst b/Documentation/scsi/advansys.rst
new file mode 100644
index 0000000..e0367e1
--- /dev/null
+++ b/Documentation/scsi/advansys.rst
@@ -0,0 +1,272 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=====================
+AdvanSys Driver Notes
+=====================
+
+AdvanSys (Advanced System Products, Inc.) manufactures the following
+RISC-based, Bus-Mastering, Fast (10 Mhz) and Ultra (20 Mhz) Narrow
+(8-bit transfer) SCSI Host Adapters for the ISA, EISA, VL, and PCI
+buses and RISC-based, Bus-Mastering, Ultra (20 Mhz) Wide (16-bit
+transfer) SCSI Host Adapters for the PCI bus.
+
+The CDB counts below indicate the number of SCSI CDB (Command
+Descriptor Block) requests that can be stored in the RISC chip
+cache and board LRAM. A CDB is a single SCSI command. The driver
+detect routine will display the number of CDBs available for each
+adapter detected. The number of CDBs used by the driver can be
+lowered in the BIOS by changing the 'Host Queue Size' adapter setting.
+
+Laptop Products:
+  - ABP-480 - Bus-Master CardBus (16 CDB)
+
+Connectivity Products:
+   - ABP510/5150 - Bus-Master ISA (240 CDB)
+   - ABP5140 - Bus-Master ISA PnP (16 CDB)
+   - ABP5142 - Bus-Master ISA PnP with floppy (16 CDB)
+   - ABP902/3902 - Bus-Master PCI (16 CDB)
+   - ABP3905 - Bus-Master PCI (16 CDB)
+   - ABP915 - Bus-Master PCI (16 CDB)
+   - ABP920 - Bus-Master PCI (16 CDB)
+   - ABP3922 - Bus-Master PCI (16 CDB)
+   - ABP3925 - Bus-Master PCI (16 CDB)
+   - ABP930 - Bus-Master PCI (16 CDB)
+   - ABP930U - Bus-Master PCI Ultra (16 CDB)
+   - ABP930UA - Bus-Master PCI Ultra (16 CDB)
+   - ABP960 - Bus-Master PCI MAC/PC (16 CDB)
+   - ABP960U - Bus-Master PCI MAC/PC Ultra (16 CDB)
+
+Single Channel Products:
+   - ABP542 - Bus-Master ISA with floppy (240 CDB)
+   - ABP742 - Bus-Master EISA (240 CDB)
+   - ABP842 - Bus-Master VL (240 CDB)
+   - ABP940 - Bus-Master PCI (240 CDB)
+   - ABP940U - Bus-Master PCI Ultra (240 CDB)
+   - ABP940UA/3940UA - Bus-Master PCI Ultra (240 CDB)
+   - ABP970 - Bus-Master PCI MAC/PC (240 CDB)
+   - ABP970U - Bus-Master PCI MAC/PC Ultra (240 CDB)
+   - ABP3960UA - Bus-Master PCI MAC/PC Ultra (240 CDB)
+   - ABP940UW/3940UW - Bus-Master PCI Ultra-Wide (253 CDB)
+   - ABP970UW - Bus-Master PCI MAC/PC Ultra-Wide (253 CDB)
+   - ABP3940U2W - Bus-Master PCI LVD/Ultra2-Wide (253 CDB)
+
+Multi-Channel Products:
+   - ABP752 - Dual Channel Bus-Master EISA (240 CDB Per Channel)
+   - ABP852 - Dual Channel Bus-Master VL (240 CDB Per Channel)
+   - ABP950 - Dual Channel Bus-Master PCI (240 CDB Per Channel)
+   - ABP950UW - Dual Channel Bus-Master PCI Ultra-Wide (253 CDB Per Channel)
+   - ABP980 - Four Channel Bus-Master PCI (240 CDB Per Channel)
+   - ABP980U - Four Channel Bus-Master PCI Ultra (240 CDB Per Channel)
+   - ABP980UA/3980UA - Four Channel Bus-Master PCI Ultra (16 CDB Per Chan.)
+   - ABP3950U2W - Bus-Master PCI LVD/Ultra2-Wide and Ultra-Wide (253 CDB)
+   - ABP3950U3W - Bus-Master PCI Dual LVD2/Ultra3-Wide (253 CDB)
+
+Driver Compile Time Options and Debugging
+=========================================
+
+The following constants can be defined in the source file.
+
+1. ADVANSYS_ASSERT - Enable driver assertions (Def: Enabled)
+
+   Enabling this option adds assertion logic statements to the
+   driver. If an assertion fails a message will be displayed to
+   the console, but the system will continue to operate. Any
+   assertions encountered should be reported to the person
+   responsible for the driver. Assertion statements may proactively
+   detect problems with the driver and facilitate fixing these
+   problems. Enabling assertions will add a small overhead to the
+   execution of the driver.
+
+2. ADVANSYS_DEBUG - Enable driver debugging (Def: Disabled)
+
+   Enabling this option adds tracing functions to the driver and the
+   ability to set a driver tracing level at boot time.  This option is
+   very useful for debugging the driver, but it will add to the size
+   of the driver execution image and add overhead to the execution of
+   the driver.
+
+   The amount of debugging output can be controlled with the global
+   variable 'asc_dbglvl'. The higher the number the more output. By
+   default the debug level is 0.
+
+   If the driver is loaded at boot time and the LILO Driver Option
+   is included in the system, the debug level can be changed by
+   specifying a 5th (ASC_NUM_IOPORT_PROBE + 1) I/O Port. The
+   first three hex digits of the pseudo I/O Port must be set to
+   'deb' and the fourth hex digit specifies the debug level: 0 - F.
+   The following command line will look for an adapter at 0x330
+   and set the debug level to 2::
+
+      linux advansys=0x330,0,0,0,0xdeb2
+
+   If the driver is built as a loadable module this variable can be
+   defined when the driver is loaded. The following insmod command
+   will set the debug level to one::
+
+      insmod advansys.o asc_dbglvl=1
+
+   Debugging Message Levels:
+
+
+      ==== ==================
+      0    Errors Only
+      1    High-Level Tracing
+      2-N  Verbose Tracing
+      ==== ==================
+
+   To enable debug output to console, please make sure that:
+
+   a. System and kernel logging is enabled (syslogd, klogd running).
+   b. Kernel messages are routed to console output. Check
+      /etc/syslog.conf for an entry similar to this::
+
+           kern.*                  /dev/console
+
+   c. klogd is started with the appropriate -c parameter
+      (e.g. klogd -c 8)
+
+   This will cause printk() messages to be be displayed on the
+   current console. Refer to the klogd(8) and syslogd(8) man pages
+   for details.
+
+   Alternatively you can enable printk() to console with this
+   program. However, this is not the 'official' way to do this.
+
+   Debug output is logged in /var/log/messages.
+
+   ::
+
+     main()
+     {
+             syscall(103, 7, 0, 0);
+     }
+
+   Increasing LOG_BUF_LEN in kernel/printk.c to something like
+   40960 allows more debug messages to be buffered in the kernel
+   and written to the console or log file.
+
+3. ADVANSYS_STATS - Enable statistics (Def: Enabled)
+
+   Enabling this option adds statistics collection and display
+   through /proc to the driver. The information is useful for
+   monitoring driver and device performance. It will add to the
+   size of the driver execution image and add minor overhead to
+   the execution of the driver.
+
+   Statistics are maintained on a per adapter basis. Driver entry
+   point call counts and transfer size counts are maintained.
+   Statistics are only available for kernels greater than or equal
+   to v1.3.0 with the CONFIG_PROC_FS (/proc) file system configured.
+
+   AdvanSys SCSI adapter files have the following path name format::
+
+      /proc/scsi/advansys/{0,1,2,3,...}
+
+   This information can be displayed with cat. For example::
+
+      cat /proc/scsi/advansys/0
+
+   When ADVANSYS_STATS is not defined the AdvanSys /proc files only
+   contain adapter and device configuration information.
+
+Driver LILO Option
+==================
+
+If init/main.c is modified as described in the 'Directions for Adding
+the AdvanSys Driver to Linux' section (B.4.) above, the driver will
+recognize the 'advansys' LILO command line and /etc/lilo.conf option.
+This option can be used to either disable I/O port scanning or to limit
+scanning to 1 - 4 I/O ports. Regardless of the option setting EISA and
+PCI boards will still be searched for and detected. This option only
+affects searching for ISA and VL boards.
+
+Examples:
+  1. Eliminate I/O port scanning:
+
+     boot::
+
+	linux advansys=
+
+     or::
+
+	boot: linux advansys=0x0
+
+  2. Limit I/O port scanning to one I/O port:
+
+     boot::
+
+	linux advansys=0x110
+
+  3. Limit I/O port scanning to four I/O ports:
+
+     boot::
+
+	linux advansys=0x110,0x210,0x230,0x330
+
+For a loadable module the same effect can be achieved by setting
+the 'asc_iopflag' variable and 'asc_ioport' array when loading
+the driver, e.g.::
+
+      insmod advansys.o asc_iopflag=1 asc_ioport=0x110,0x330
+
+If ADVANSYS_DEBUG is defined a 5th (ASC_NUM_IOPORT_PROBE + 1)
+I/O Port may be added to specify the driver debug level. Refer to
+the 'Driver Compile Time Options and Debugging' section above for
+more information.
+
+Credits (Chronological Order)
+=============================
+
+Bob Frey <bfrey@turbolinux.com.cn> wrote the AdvanSys SCSI driver
+and maintained it up to 3.3F. He continues to answer questions
+and help maintain the driver.
+
+Nathan Hartwell <mage@cdc3.cdc.net> provided the directions and
+basis for the Linux v1.3.X changes which were included in the
+1.2 release.
+
+Thomas E Zerucha <zerucha@shell.portal.com> pointed out a bug
+in advansys_biosparam() which was fixed in the 1.3 release.
+
+Erik Ratcliffe <erik@caldera.com> has done testing of the
+AdvanSys driver in the Caldera releases.
+
+Rik van Riel <H.H.vanRiel@fys.ruu.nl> provided a patch to
+AscWaitTixISRDone() which he found necessary to make the
+driver work with a SCSI-1 disk.
+
+Mark Moran <mmoran@mmoran.com> has helped test Ultra-Wide
+support in the 3.1A driver.
+
+Doug Gilbert <dgilbert@interlog.com> has made changes and
+suggestions to improve the driver and done a lot of testing.
+
+Ken Mort <ken@mort.net> reported a DEBUG compile bug fixed
+in 3.2K.
+
+Tom Rini <trini@kernel.crashing.org> provided the CONFIG_ISA
+patch and helped with PowerPC wide and narrow board support.
+
+Philip Blundell <philb@gnu.org> provided an
+advansys_interrupts_enabled patch.
+
+Dave Jones <dave@denial.force9.co.uk> reported the compiler
+warnings generated when CONFIG_PROC_FS was not defined in
+the 3.2M driver.
+
+Jerry Quinn <jlquinn@us.ibm.com> fixed PowerPC support (endian
+problems) for wide cards.
+
+Bryan Henderson <bryanh@giraffe-data.com> helped debug narrow
+card error handling.
+
+Manuel Veloso <veloso@pobox.com> worked hard on PowerPC narrow
+board support and fixed a bug in AscGetEEPConfig().
+
+Arnaldo Carvalho de Melo <acme@conectiva.com.br> made
+save_flags/restore_flags changes.
+
+Andy Kellner <AKellner@connectcom.net> continued the Advansys SCSI
+driver development for ConnectCom (Version > 3.3F).
+
+Ken Witherow for extensive testing during the development of version 3.4.
diff --git a/Documentation/scsi/advansys.txt b/Documentation/scsi/advansys.txt
deleted file mode 100644
index 4a3db62..0000000
--- a/Documentation/scsi/advansys.txt
+++ /dev/null
@@ -1,243 +0,0 @@
-AdvanSys (Advanced System Products, Inc.) manufactures the following
-RISC-based, Bus-Mastering, Fast (10 Mhz) and Ultra (20 Mhz) Narrow
-(8-bit transfer) SCSI Host Adapters for the ISA, EISA, VL, and PCI
-buses and RISC-based, Bus-Mastering, Ultra (20 Mhz) Wide (16-bit
-transfer) SCSI Host Adapters for the PCI bus.
-
-The CDB counts below indicate the number of SCSI CDB (Command
-Descriptor Block) requests that can be stored in the RISC chip
-cache and board LRAM. A CDB is a single SCSI command. The driver
-detect routine will display the number of CDBs available for each
-adapter detected. The number of CDBs used by the driver can be
-lowered in the BIOS by changing the 'Host Queue Size' adapter setting.
-
-Laptop Products:
-   ABP-480 - Bus-Master CardBus (16 CDB)
-
-Connectivity Products:
-   ABP510/5150 - Bus-Master ISA (240 CDB)
-   ABP5140 - Bus-Master ISA PnP (16 CDB)
-   ABP5142 - Bus-Master ISA PnP with floppy (16 CDB)
-   ABP902/3902 - Bus-Master PCI (16 CDB)
-   ABP3905 - Bus-Master PCI (16 CDB)
-   ABP915 - Bus-Master PCI (16 CDB)
-   ABP920 - Bus-Master PCI (16 CDB)
-   ABP3922 - Bus-Master PCI (16 CDB)
-   ABP3925 - Bus-Master PCI (16 CDB)
-   ABP930 - Bus-Master PCI (16 CDB)
-   ABP930U - Bus-Master PCI Ultra (16 CDB)
-   ABP930UA - Bus-Master PCI Ultra (16 CDB)
-   ABP960 - Bus-Master PCI MAC/PC (16 CDB)
-   ABP960U - Bus-Master PCI MAC/PC Ultra (16 CDB)
-
-Single Channel Products:
-   ABP542 - Bus-Master ISA with floppy (240 CDB)
-   ABP742 - Bus-Master EISA (240 CDB)
-   ABP842 - Bus-Master VL (240 CDB)
-   ABP940 - Bus-Master PCI (240 CDB)
-   ABP940U - Bus-Master PCI Ultra (240 CDB)
-   ABP940UA/3940UA - Bus-Master PCI Ultra (240 CDB)
-   ABP970 - Bus-Master PCI MAC/PC (240 CDB)
-   ABP970U - Bus-Master PCI MAC/PC Ultra (240 CDB)
-   ABP3960UA - Bus-Master PCI MAC/PC Ultra (240 CDB)
-   ABP940UW/3940UW - Bus-Master PCI Ultra-Wide (253 CDB)
-   ABP970UW - Bus-Master PCI MAC/PC Ultra-Wide (253 CDB)
-   ABP3940U2W - Bus-Master PCI LVD/Ultra2-Wide (253 CDB)
-
-Multi-Channel Products:
-   ABP752 - Dual Channel Bus-Master EISA (240 CDB Per Channel)
-   ABP852 - Dual Channel Bus-Master VL (240 CDB Per Channel)
-   ABP950 - Dual Channel Bus-Master PCI (240 CDB Per Channel)
-   ABP950UW - Dual Channel Bus-Master PCI Ultra-Wide (253 CDB Per Channel)
-   ABP980 - Four Channel Bus-Master PCI (240 CDB Per Channel)
-   ABP980U - Four Channel Bus-Master PCI Ultra (240 CDB Per Channel)
-   ABP980UA/3980UA - Four Channel Bus-Master PCI Ultra (16 CDB Per Chan.)
-   ABP3950U2W - Bus-Master PCI LVD/Ultra2-Wide and Ultra-Wide (253 CDB)
-   ABP3950U3W - Bus-Master PCI Dual LVD2/Ultra3-Wide (253 CDB)
-
-Driver Compile Time Options and Debugging
-
-The following constants can be defined in the source file.
-
-1. ADVANSYS_ASSERT - Enable driver assertions (Def: Enabled)
-
-   Enabling this option adds assertion logic statements to the
-   driver. If an assertion fails a message will be displayed to
-   the console, but the system will continue to operate. Any
-   assertions encountered should be reported to the person
-   responsible for the driver. Assertion statements may proactively
-   detect problems with the driver and facilitate fixing these
-   problems. Enabling assertions will add a small overhead to the
-   execution of the driver.
-
-2. ADVANSYS_DEBUG - Enable driver debugging (Def: Disabled)
-
-   Enabling this option adds tracing functions to the driver and the
-   ability to set a driver tracing level at boot time.  This option is
-   very useful for debugging the driver, but it will add to the size
-   of the driver execution image and add overhead to the execution of
-   the driver.
-
-   The amount of debugging output can be controlled with the global
-   variable 'asc_dbglvl'. The higher the number the more output. By
-   default the debug level is 0.
-
-   If the driver is loaded at boot time and the LILO Driver Option
-   is included in the system, the debug level can be changed by
-   specifying a 5th (ASC_NUM_IOPORT_PROBE + 1) I/O Port. The
-   first three hex digits of the pseudo I/O Port must be set to
-   'deb' and the fourth hex digit specifies the debug level: 0 - F.
-   The following command line will look for an adapter at 0x330
-   and set the debug level to 2.
-
-      linux advansys=0x330,0,0,0,0xdeb2
-
-   If the driver is built as a loadable module this variable can be
-   defined when the driver is loaded. The following insmod command
-   will set the debug level to one.
-
-      insmod advansys.o asc_dbglvl=1
-
-   Debugging Message Levels:
-      0: Errors Only
-      1: High-Level Tracing
-      2-N: Verbose Tracing
-
-   To enable debug output to console, please make sure that:
-
-   a. System and kernel logging is enabled (syslogd, klogd running).
-   b. Kernel messages are routed to console output. Check
-      /etc/syslog.conf for an entry similar to this:
-
-           kern.*                  /dev/console
-
-   c. klogd is started with the appropriate -c parameter
-      (e.g. klogd -c 8)
-
-   This will cause printk() messages to be be displayed on the
-   current console. Refer to the klogd(8) and syslogd(8) man pages
-   for details.
-
-   Alternatively you can enable printk() to console with this
-   program. However, this is not the 'official' way to do this.
-   Debug output is logged in /var/log/messages.
-
-     main()
-     {
-             syscall(103, 7, 0, 0);
-     }
-
-   Increasing LOG_BUF_LEN in kernel/printk.c to something like
-   40960 allows more debug messages to be buffered in the kernel
-   and written to the console or log file.
-
-3. ADVANSYS_STATS - Enable statistics (Def: Enabled)
-
-   Enabling this option adds statistics collection and display
-   through /proc to the driver. The information is useful for
-   monitoring driver and device performance. It will add to the
-   size of the driver execution image and add minor overhead to
-   the execution of the driver.
-
-   Statistics are maintained on a per adapter basis. Driver entry
-   point call counts and transfer size counts are maintained.
-   Statistics are only available for kernels greater than or equal
-   to v1.3.0 with the CONFIG_PROC_FS (/proc) file system configured.
-
-   AdvanSys SCSI adapter files have the following path name format:
-
-      /proc/scsi/advansys/{0,1,2,3,...}
-
-   This information can be displayed with cat. For example:
-
-      cat /proc/scsi/advansys/0
-
-   When ADVANSYS_STATS is not defined the AdvanSys /proc files only
-   contain adapter and device configuration information.
-
-Driver LILO Option
-
-If init/main.c is modified as described in the 'Directions for Adding
-the AdvanSys Driver to Linux' section (B.4.) above, the driver will
-recognize the 'advansys' LILO command line and /etc/lilo.conf option.
-This option can be used to either disable I/O port scanning or to limit
-scanning to 1 - 4 I/O ports. Regardless of the option setting EISA and
-PCI boards will still be searched for and detected. This option only
-affects searching for ISA and VL boards.
-
-Examples:
-  1. Eliminate I/O port scanning:
-       boot: linux advansys=
-         or
-       boot: linux advansys=0x0
-  2. Limit I/O port scanning to one I/O port:
-       boot: linux advansys=0x110
-  3. Limit I/O port scanning to four I/O ports:
-       boot: linux advansys=0x110,0x210,0x230,0x330
-
-For a loadable module the same effect can be achieved by setting
-the 'asc_iopflag' variable and 'asc_ioport' array when loading
-the driver, e.g.
-
-      insmod advansys.o asc_iopflag=1 asc_ioport=0x110,0x330
-
-If ADVANSYS_DEBUG is defined a 5th (ASC_NUM_IOPORT_PROBE + 1)
-I/O Port may be added to specify the driver debug level. Refer to
-the 'Driver Compile Time Options and Debugging' section above for
-more information.
-
-Credits (Chronological Order)
-
-Bob Frey <bfrey@turbolinux.com.cn> wrote the AdvanSys SCSI driver
-and maintained it up to 3.3F. He continues to answer questions
-and help maintain the driver.
-
-Nathan Hartwell <mage@cdc3.cdc.net> provided the directions and
-basis for the Linux v1.3.X changes which were included in the
-1.2 release.
-
-Thomas E Zerucha <zerucha@shell.portal.com> pointed out a bug
-in advansys_biosparam() which was fixed in the 1.3 release.
-
-Erik Ratcliffe <erik@caldera.com> has done testing of the
-AdvanSys driver in the Caldera releases.
-
-Rik van Riel <H.H.vanRiel@fys.ruu.nl> provided a patch to
-AscWaitTixISRDone() which he found necessary to make the
-driver work with a SCSI-1 disk.
-
-Mark Moran <mmoran@mmoran.com> has helped test Ultra-Wide
-support in the 3.1A driver.
-
-Doug Gilbert <dgilbert@interlog.com> has made changes and
-suggestions to improve the driver and done a lot of testing.
-
-Ken Mort <ken@mort.net> reported a DEBUG compile bug fixed
-in 3.2K.
-
-Tom Rini <trini@kernel.crashing.org> provided the CONFIG_ISA
-patch and helped with PowerPC wide and narrow board support.
-
-Philip Blundell <philb@gnu.org> provided an
-advansys_interrupts_enabled patch.
-
-Dave Jones <dave@denial.force9.co.uk> reported the compiler
-warnings generated when CONFIG_PROC_FS was not defined in
-the 3.2M driver.
-
-Jerry Quinn <jlquinn@us.ibm.com> fixed PowerPC support (endian
-problems) for wide cards.
-
-Bryan Henderson <bryanh@giraffe-data.com> helped debug narrow
-card error handling.
-
-Manuel Veloso <veloso@pobox.com> worked hard on PowerPC narrow
-board support and fixed a bug in AscGetEEPConfig().
-
-Arnaldo Carvalho de Melo <acme@conectiva.com.br> made
-save_flags/restore_flags changes.
-
-Andy Kellner <AKellner@connectcom.net> continued the Advansys SCSI
-driver development for ConnectCom (Version > 3.3F).
-
-Ken Witherow for extensive testing during the development of version 3.4.
diff --git a/Documentation/scsi/aha152x.rst b/Documentation/scsi/aha152x.rst
new file mode 100644
index 0000000..7012b5c
--- /dev/null
+++ b/Documentation/scsi/aha152x.rst
@@ -0,0 +1,204 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: <isonum.txt>
+
+=====================================================
+Adaptec AHA-1520/1522 SCSI driver for Linux (aha152x)
+=====================================================
+
+Copyright |copy| 1993-1999 Jürgen Fischer <fischer@norbit.de>
+
+TC1550 patches by Luuk van Dijk (ldz@xs4all.nl)
+
+
+In Revision 2 the driver was modified a lot (especially the
+bottom-half handler complete()).
+
+The driver is much cleaner now, has support for the new
+error handling code in 2.3, produced less cpu load (much
+less polling loops), has slightly higher throughput (at
+least on my ancient test box; a i486/33Mhz/20MB).
+
+
+Configuration Arguments
+=======================
+
+============  ========================================  ======================
+IOPORT        base io address                           (0x340/0x140)
+IRQ           interrupt level                           (9-12; default 11)
+SCSI_ID       scsi id of controller                     (0-7; default 7)
+RECONNECT     allow targets to disconnect from the bus  (0/1; default 1 [on])
+PARITY        enable parity checking                    (0/1; default 1 [on])
+SYNCHRONOUS   enable synchronous transfers              (0/1; default 1 [on])
+DELAY:        bus reset delay                           (default 100)
+EXT_TRANS:    enable extended translation               (0/1: default 0 [off])
+              (see NOTES)
+============  ========================================  ======================
+
+Compile Time Configuration
+==========================
+
+(go into AHA152X in drivers/scsi/Makefile):
+
+- DAUTOCONF
+    use configuration the controller reports (AHA-152x only)
+
+- DSKIP_BIOSTEST
+    Don't test for BIOS signature (AHA-1510 or disabled BIOS)
+
+- DSETUP0="{ IOPORT, IRQ, SCSI_ID, RECONNECT, PARITY, SYNCHRONOUS, DELAY, EXT_TRANS }"
+    override for the first controller
+
+- DSETUP1="{ IOPORT, IRQ, SCSI_ID, RECONNECT, PARITY, SYNCHRONOUS, DELAY, EXT_TRANS }"
+    override for the second controller
+
+- DAHA152X_DEBUG
+    enable debugging output
+
+- DAHA152X_STAT
+    enable some statistics
+
+
+LILO Command Line Options
+=========================
+
+ ::
+
+    aha152x=<IOPORT>[,<IRQ>[,<SCSI-ID>[,<RECONNECT>[,<PARITY>[,<SYNCHRONOUS>[,<DELAY> [,<EXT_TRANS]]]]]]]
+
+ The normal configuration can be overridden by specifying a command line.
+ When you do this, the BIOS test is skipped. Entered values have to be
+ valid (known).  Don't use values that aren't supported under normal
+ operation.  If you think that you need other values: contact me.
+ For two controllers use the aha152x statement twice.
+
+
+Symbols for Module Configuration
+================================
+
+Choose from 2 alternatives:
+
+1. specify everything (old)::
+
+    aha152x=IOPORT,IRQ,SCSI_ID,RECONNECT,PARITY,SYNCHRONOUS,DELAY,EXT_TRANS
+
+  configuration override for first controller
+
+  ::
+
+    aha152x1=IOPORT,IRQ,SCSI_ID,RECONNECT,PARITY,SYNCHRONOUS,DELAY,EXT_TRANS
+
+  configuration override for second controller
+
+2. specify only what you need to (irq or io is required; new)
+
+io=IOPORT0[,IOPORT1]
+  IOPORT for first and second controller
+
+irq=IRQ0[,IRQ1]
+  IRQ for first and second controller
+
+scsiid=SCSIID0[,SCSIID1]
+  SCSIID for first and second controller
+
+reconnect=RECONNECT0[,RECONNECT1]
+  allow targets to disconnect for first and second controller
+
+parity=PAR0[PAR1]
+  use parity for first and second controller
+
+sync=SYNCHRONOUS0[,SYNCHRONOUS1]
+  enable synchronous transfers for first and second controller
+
+delay=DELAY0[,DELAY1]
+  reset DELAY for first and second controller
+
+exttrans=EXTTRANS0[,EXTTRANS1]
+  enable extended translation for first and second controller
+
+
+If you use both alternatives the first will be taken.
+
+
+Notes on EXT_TRANS
+==================
+
+SCSI uses block numbers to address blocks/sectors on a device.
+The BIOS uses a cylinder/head/sector addressing scheme (C/H/S)
+scheme instead.  DOS expects a BIOS or driver that understands this
+C/H/S addressing.
+
+The number of cylinders/heads/sectors is called geometry and is required
+as base for requests in C/H/S addressing.  SCSI only knows about the
+total capacity of disks in blocks (sectors).
+
+Therefore the SCSI BIOS/DOS driver has to calculate a logical/virtual
+geometry just to be able to support that addressing scheme.  The geometry
+returned by the SCSI BIOS is a pure calculation and has nothing to
+do with the real/physical geometry of the disk (which is usually
+irrelevant anyway).
+
+Basically this has no impact at all on Linux, because it also uses block
+instead of C/H/S addressing.  Unfortunately C/H/S addressing is also used
+in the partition table and therefore every operating system has to know
+the right geometry to be able to interpret it.
+
+Moreover there are certain limitations to the C/H/S addressing scheme,
+namely the address space is limited to up to 255 heads, up to 63 sectors
+and a maximum of 1023 cylinders.
+
+The AHA-1522 BIOS calculates the geometry by fixing the number of heads
+to 64, the number of sectors to 32 and by calculating the number of
+cylinders by dividing the capacity reported by the disk by 64*32 (1 MB).
+This is considered to be the default translation.
+
+With respect to the limit of 1023 cylinders using C/H/S you can only
+address the first GB of your disk in the partition table.  Therefore
+BIOSes of some newer controllers based on the AIC-6260/6360 support
+extended translation.  This means that the BIOS uses 255 for heads,
+63 for sectors and then divides the capacity of the disk by 255*63
+(about 8 MB), as soon it sees a disk greater than 1 GB.  That results
+in a maximum of about 8 GB addressable diskspace in the partition table
+(but there are already bigger disks out there today).
+
+To make it even more complicated the translation mode might/might
+not be configurable in certain BIOS setups.
+
+This driver does some more or less failsafe guessing to get the
+geometry right in most cases:
+
+- for disks<1GB: use default translation (C/32/64)
+
+- for disks>1GB:
+
+  - take current geometry from the partition table
+    (using scsicam_bios_param and accept only 'valid' geometries,
+    ie. either (C/32/64) or (C/63/255)).  This can be extended translation
+    even if it's not enabled in the driver.
+
+  - if that fails, take extended translation if enabled by override,
+    kernel or module parameter, otherwise take default translation and
+    ask the user for verification.  This might on not yet partitioned
+    disks.
+
+
+References Used
+===============
+
+ "AIC-6260 SCSI Chip Specification", Adaptec Corporation.
+
+ "SCSI COMPUTER SYSTEM INTERFACE - 2 (SCSI-2)", X3T9.2/86-109 rev. 10h
+
+ "Writing a SCSI device driver for Linux", Rik Faith (faith@cs.unc.edu)
+
+ "Kernel Hacker's Guide", Michael K. Johnson (johnsonm@sunsite.unc.edu)
+
+ "Adaptec 1520/1522 User's Guide", Adaptec Corporation.
+
+ Michael K. Johnson (johnsonm@sunsite.unc.edu)
+
+ Drew Eckhardt (drew@cs.colorado.edu)
+
+ Eric Youngdale (eric@andante.org)
+
+ special thanks to Eric Youngdale for the free(!) supplying the
+ documentation on the chip.
diff --git a/Documentation/scsi/aha152x.txt b/Documentation/scsi/aha152x.txt
deleted file mode 100644
index 9484873..0000000
--- a/Documentation/scsi/aha152x.txt
+++ /dev/null
@@ -1,183 +0,0 @@
-$Id: README.aha152x,v 1.2 1999/12/25 15:32:30 fischer Exp fischer $
-Adaptec AHA-1520/1522 SCSI driver for Linux (aha152x)
-
-Copyright 1993-1999 Jürgen Fischer <fischer@norbit.de>
-TC1550 patches by Luuk van Dijk (ldz@xs4all.nl)
-
-
-In Revision 2 the driver was modified a lot (especially the
-bottom-half handler complete()).
-
-The driver is much cleaner now, has support for the new
-error handling code in 2.3, produced less cpu load (much
-less polling loops), has slightly higher throughput (at
-least on my ancient test box; a i486/33Mhz/20MB).
-
-
-CONFIGURATION ARGUMENTS:
-
-IOPORT        base io address                           (0x340/0x140)
-IRQ           interrupt level                           (9-12; default 11)
-SCSI_ID       scsi id of controller                     (0-7; default 7)
-RECONNECT     allow targets to disconnect from the bus  (0/1; default 1 [on])
-PARITY        enable parity checking                    (0/1; default 1 [on])
-SYNCHRONOUS   enable synchronous transfers              (0/1; default 1 [on])
-DELAY:        bus reset delay                           (default 100)
-EXT_TRANS:    enable extended translation               (0/1: default 0 [off])
-              (see NOTES)
-
-COMPILE TIME CONFIGURATION (go into AHA152X in drivers/scsi/Makefile):
-
--DAUTOCONF
- use configuration the controller reports (AHA-152x only)
-
--DSKIP_BIOSTEST
- Don't test for BIOS signature (AHA-1510 or disabled BIOS)
-
--DSETUP0="{ IOPORT, IRQ, SCSI_ID, RECONNECT, PARITY, SYNCHRONOUS, DELAY, EXT_TRANS }"
- override for the first controller 
-
--DSETUP1="{ IOPORT, IRQ, SCSI_ID, RECONNECT, PARITY, SYNCHRONOUS, DELAY, EXT_TRANS }"
- override for the second controller
-
--DAHA152X_DEBUG
- enable debugging output
-
--DAHA152X_STAT
- enable some statistics
-
-
-LILO COMMAND LINE OPTIONS:
-
-aha152x=<IOPORT>[,<IRQ>[,<SCSI-ID>[,<RECONNECT>[,<PARITY>[,<SYNCHRONOUS>[,<DELAY> [,<EXT_TRANS]]]]]]]
-
- The normal configuration can be overridden by specifying a command line.
- When you do this, the BIOS test is skipped. Entered values have to be
- valid (known).  Don't use values that aren't supported under normal
- operation.  If you think that you need other values: contact me.
- For two controllers use the aha152x statement twice.
-
-
-SYMBOLS FOR MODULE CONFIGURATION:
-
-Choose from 2 alternatives:
-
-1. specify everything (old)
-
-aha152x=IOPORT,IRQ,SCSI_ID,RECONNECT,PARITY,SYNCHRONOUS,DELAY,EXT_TRANS
-  configuration override for first controller
-
-
-aha152x1=IOPORT,IRQ,SCSI_ID,RECONNECT,PARITY,SYNCHRONOUS,DELAY,EXT_TRANS
-  configuration override for second controller
-
-2. specify only what you need to (irq or io is required; new)
-
-io=IOPORT0[,IOPORT1]
-  IOPORT for first and second controller
-
-irq=IRQ0[,IRQ1]
-  IRQ for first and second controller
-
-scsiid=SCSIID0[,SCSIID1]
-  SCSIID for first and second controller
-
-reconnect=RECONNECT0[,RECONNECT1]
-  allow targets to disconnect for first and second controller
-
-parity=PAR0[PAR1]
-  use parity for first and second controller
-
-sync=SYNCHRONOUS0[,SYNCHRONOUS1]
-  enable synchronous transfers for first and second controller
-
-delay=DELAY0[,DELAY1]
-  reset DELAY for first and second controller
-
-exttrans=EXTTRANS0[,EXTTRANS1]
-  enable extended translation for first and second controller
-
-
-If you use both alternatives the first will be taken.
-
-
-NOTES ON EXT_TRANS: 
-
-SCSI uses block numbers to address blocks/sectors on a device.
-The BIOS uses a cylinder/head/sector addressing scheme (C/H/S)
-scheme instead.  DOS expects a BIOS or driver that understands this
-C/H/S addressing.
-
-The number of cylinders/heads/sectors is called geometry and is required
-as base for requests in C/H/S addressing.  SCSI only knows about the
-total capacity of disks in blocks (sectors).
-
-Therefore the SCSI BIOS/DOS driver has to calculate a logical/virtual
-geometry just to be able to support that addressing scheme.  The geometry
-returned by the SCSI BIOS is a pure calculation and has nothing to
-do with the real/physical geometry of the disk (which is usually
-irrelevant anyway).
-
-Basically this has no impact at all on Linux, because it also uses block
-instead of C/H/S addressing.  Unfortunately C/H/S addressing is also used
-in the partition table and therefore every operating system has to know
-the right geometry to be able to interpret it.
-
-Moreover there are certain limitations to the C/H/S addressing scheme,
-namely the address space is limited to up to 255 heads, up to 63 sectors
-and a maximum of 1023 cylinders.
-
-The AHA-1522 BIOS calculates the geometry by fixing the number of heads
-to 64, the number of sectors to 32 and by calculating the number of
-cylinders by dividing the capacity reported by the disk by 64*32 (1 MB).
-This is considered to be the default translation.
-
-With respect to the limit of 1023 cylinders using C/H/S you can only
-address the first GB of your disk in the partition table.  Therefore
-BIOSes of some newer controllers based on the AIC-6260/6360 support
-extended translation.  This means that the BIOS uses 255 for heads,
-63 for sectors and then divides the capacity of the disk by 255*63
-(about 8 MB), as soon it sees a disk greater than 1 GB.  That results
-in a maximum of about 8 GB addressable diskspace in the partition table
-(but there are already bigger disks out there today).
-
-To make it even more complicated the translation mode might/might
-not be configurable in certain BIOS setups.
-
-This driver does some more or less failsafe guessing to get the
-geometry right in most cases:
-
-- for disks<1GB: use default translation (C/32/64)
-
-- for disks>1GB:
-  - take current geometry from the partition table
-    (using scsicam_bios_param and accept only `valid' geometries,
-    ie. either (C/32/64) or (C/63/255)).  This can be extended translation
-    even if it's not enabled in the driver.
-
-  - if that fails, take extended translation if enabled by override,
-    kernel or module parameter, otherwise take default translation and
-    ask the user for verification.  This might on not yet partitioned
-    disks.
-
-
-REFERENCES USED:
-
- "AIC-6260 SCSI Chip Specification", Adaptec Corporation.
-
- "SCSI COMPUTER SYSTEM INTERFACE - 2 (SCSI-2)", X3T9.2/86-109 rev. 10h
-
- "Writing a SCSI device driver for Linux", Rik Faith (faith@cs.unc.edu)
-
- "Kernel Hacker's Guide", Michael K. Johnson (johnsonm@sunsite.unc.edu)
-
- "Adaptec 1520/1522 User's Guide", Adaptec Corporation.
-
- Michael K. Johnson (johnsonm@sunsite.unc.edu)
-
- Drew Eckhardt (drew@cs.colorado.edu)
-
- Eric Youngdale (eric@andante.org) 
-
- special thanks to Eric Youngdale for the free(!) supplying the
- documentation on the chip.
diff --git a/Documentation/scsi/aic79xx.rst b/Documentation/scsi/aic79xx.rst
new file mode 100644
index 0000000..071ff51
--- /dev/null
+++ b/Documentation/scsi/aic79xx.rst
@@ -0,0 +1,593 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: <isonum.txt>
+
+===================================
+Adaptec Ultra320 Family Manager Set
+===================================
+
+README for The Linux Operating System
+
+.. The following information is available in this file:
+
+  1. Supported Hardware
+  2. Version History
+  3. Command Line Options
+  4. Additional Notes
+  5. Contacting Adaptec
+
+
+1. Supported Hardware
+=====================
+
+   The following Adaptec SCSI Host Adapters are supported by this
+   driver set.
+
+   =============              =========================================
+   Ultra320 ASIC              Description
+   =============              =========================================
+   AIC-7901A                  Single Channel 64-bit PCI-X 133MHz to
+                              Ultra320 SCSI ASIC
+   AIC-7901B                  Single Channel 64-bit PCI-X 133MHz to
+                              Ultra320 SCSI ASIC with Retained Training
+   AIC-7902A4                 Dual Channel 64-bit PCI-X 133MHz to
+                              Ultra320 SCSI ASIC
+   AIC-7902B                  Dual Channel 64-bit PCI-X 133MHz to
+                              Ultra320 SCSI ASIC with Retained Training
+   =============              =========================================
+
+   ========================== ===================================== ============
+   Ultra320 Adapters          Description                              ASIC
+   ========================== ===================================== ============
+   Adaptec SCSI Card 39320    Dual Channel 64-bit PCI-X 133MHz to   7902A4/7902B
+                              Ultra320 SCSI Card (one external
+                              68-pin, two internal 68-pin)
+   Adaptec SCSI Card 39320A   Dual Channel 64-bit PCI-X 133MHz to      7902B
+                              Ultra320 SCSI Card (one external
+                              68-pin, two internal 68-pin)
+   Adaptec SCSI Card 39320D   Dual Channel 64-bit PCI-X 133MHz to      7902A4
+                              Ultra320 SCSI Card (two external VHDC
+                              and one internal 68-pin)
+   Adaptec SCSI Card 39320D   Dual Channel 64-bit PCI-X 133MHz to      7902A4
+                              Ultra320 SCSI Card (two external VHDC
+                              and one internal 68-pin) based on the
+                              AIC-7902B ASIC
+   Adaptec SCSI Card 29320    Single Channel 64-bit PCI-X 133MHz to    7901A
+                              Ultra320 SCSI Card (one external
+                              68-pin, two internal 68-pin, one
+                              internal 50-pin)
+   Adaptec SCSI Card 29320A   Single Channel 64-bit PCI-X 133MHz to    7901B
+                              Ultra320 SCSI Card (one external
+                              68-pin, two internal 68-pin, one
+                              internal 50-pin)
+   Adaptec SCSI Card 29320LP  Single Channel 64-bit Low Profile        7901A
+                              PCI-X 133MHz to Ultra320 SCSI Card
+                              (One external VHDC, one internal
+                              68-pin)
+   Adaptec SCSI Card 29320ALP Single Channel 64-bit Low Profile        7901B
+                              PCI-X 133MHz to Ultra320 SCSI Card
+                              (One external VHDC, one internal
+                              68-pin)
+   ========================== ===================================== ============
+
+2. Version History
+==================
+
+
+ * 3.0	  (December 1st, 2005)
+	- Updated driver to use SCSI transport class infrastructure
+	- Upported sequencer and core fixes from adaptec released
+	  version 2.0.15 of the driver.
+
+ * 1.3.11 (July 11, 2003)
+        - Fix several deadlock issues.
+        - Add 29320ALP and 39320B Id's.
+
+ * 1.3.10 (June 3rd, 2003)
+        - Align the SCB_TAG field on a 16byte boundary.  This avoids
+          SCB corruption on some PCI-33 busses.
+        - Correct non-zero luns on Rev B. hardware.
+        - Update for change in 2.5.X SCSI proc FS interface.
+        - When negotiation async via an 8bit WDTR message, send
+          an SDTR with an offset of 0 to be sure the target
+          knows we are async.  This works around a firmware defect
+          in the Quantum Atlas 10K.
+        - Implement controller suspend and resume.
+        - Clear PCI error state during driver attach so that we
+          don't disable memory mapped I/O due to a stray write
+          by some other driver probe that occurred before we
+          claimed the controller.
+
+ * 1.3.9 (May 22nd, 2003)
+        - Fix compiler errors.
+        - Remove S/G splitting for segments that cross a 4GB boundary.
+          This is guaranteed not to happen in Linux.
+        - Add support for scsi_report_device_reset() found in
+          2.5.X kernels.
+        - Add 7901B support.
+        - Simplify handling of the packetized lun Rev A workaround.
+        - Correct and simplify handling of the ignore wide residue
+          message.  The previous code would fail to report a residual
+          if the transaction data length was even and we received
+          an IWR message.
+
+ * 1.3.8 (April 29th, 2003)
+        - Fix types accessed via the command line interface code.
+        - Perform a few firmware optimizations.
+        - Fix "Unexpected PKT busfree" errors.
+        - Use a sequencer interrupt to notify the host of
+          commands with bad status.  We defer the notification
+          until there are no outstanding selections to ensure
+          that the host is interrupted for as short a time as
+          possible.
+        - Remove pre-2.2.X support.
+        - Add support for new 2.5.X interrupt API.
+        - Correct big-endian architecture support.
+
+ * 1.3.7 (April 16th, 2003)
+        - Use del_timer_sync() to ensure that no timeouts
+          are pending during controller shutdown.
+        - For pre-2.5.X kernels, carefully adjust our segment
+          list size to avoid SCSI malloc pool fragmentation.
+        - Cleanup channel display in our /proc output.
+        - Workaround duplicate device entries in the mid-layer
+          device list during add-single-device.
+
+ * 1.3.6 (March 28th, 2003)
+        - Correct a double free in the Domain Validation code.
+        - Correct a reference to free'ed memory during controller
+          shutdown.
+        - Reset the bus on an SE->LVD change.  This is required
+          to reset our transceivers.
+
+ * 1.3.5 (March 24th, 2003)
+        - Fix a few register window mode bugs.
+        - Include read streaming in the PPR flags we display in
+          diagnostics as well as /proc.
+        - Add PCI hot plug support for 2.5.X kernels.
+        - Correct default precompensation value for RevA hardware.
+        - Fix Domain Validation thread shutdown.
+        - Add a firmware workaround to make the LED blink
+          brighter during packetized operations on the H2A4.
+        - Correct /proc display of user read streaming settings.
+        - Simplify driver locking by releasing the io_request_lock
+          upon driver entry from the mid-layer.
+        - Cleanup command line parsing and move much of this code
+          to aiclib.
+
+ * 1.3.4 (February 28th, 2003)
+        - Correct a race condition in our error recovery handler.
+        - Allow Test Unit Ready commands to take a full 5 seconds
+          during Domain Validation.
+
+ * 1.3.2 (February 19th, 2003)
+        - Correct a Rev B. regression due to the GEM318
+          compatibility fix included in 1.3.1.
+
+ * 1.3.1 (February 11th, 2003)
+        - Add support for the 39320A.
+        - Improve recovery for certain PCI-X errors.
+        - Fix handling of LQ/DATA/LQ/DATA for the
+          same write transaction that can occur without
+          interveining training.
+        - Correct compatibility issues with the GEM318
+          enclosure services device.
+        - Correct data corruption issue that occurred under
+          high tag depth write loads.
+        - Adapt to a change in the 2.5.X daemonize() API.
+        - Correct a "Missing case in ahd_handle_scsiint" panic.
+
+ * 1.3.0 (January 21st, 2003)
+        - Full regression testing for all U320 products completed.
+        - Added abort and target/lun reset error recovery handler and
+          interrupt coalescing.
+
+ * 1.2.0 (November 14th, 2002)
+        - Added support for Domain Validation
+        - Add support for the Hewlett-Packard version of the 39320D
+          and AIC-7902 adapters.
+
+        Support for previous adapters has not been fully tested and should
+        only be used at the customer's own risk.
+
+ * 1.1.1 (September 24th, 2002)
+        - Added support for the Linux 2.5.X kernel series
+
+ * 1.1.0 (September 17th, 2002)
+        - Added support for four additional SCSI products:
+          ASC-39320, ASC-29320, ASC-29320LP, AIC-7901.
+
+ * 1.0.0 (May 30th, 2002)
+        - Initial driver release.
+
+ * 2.1. Software/Hardware Features
+        - Support for the SPI-4 "Ultra320" standard:
+          - 320MB/s transfer rates
+          - Packetized SCSI Protocol at 160MB/s and 320MB/s
+          - Quick Arbitration Selection (QAS)
+          - Retained Training Information (Rev B. ASIC only)
+        - Interrupt Coalescing
+        - Initiator Mode (target mode not currently
+          supported)
+        - Support for the PCI-X standard up to 133MHz
+        - Support for the PCI v2.2 standard
+        - Domain Validation
+
+ * 2.2. Operating System Support:
+        - Redhat Linux 7.2, 7.3, 8.0, Advanced Server 2.1
+        - SuSE Linux 7.3, 8.0, 8.1, Enterprise Server 7
+        - only Intel and AMD x86 supported at this time
+        - >4GB memory configurations supported.
+
+     Refer to the User's Guide for more details on this.
+
+3. Command Line Options
+=======================
+
+    .. Warning::
+
+	         ALTERING OR ADDING THESE DRIVER PARAMETERS
+                 INCORRECTLY CAN RENDER YOUR SYSTEM INOPERABLE.
+                 USE THEM WITH CAUTION.
+
+   Put a .conf file in the /etc/modprobe.d/ directory and add/edit a
+   line containing ``options aic79xx aic79xx=[command[,command...]]`` where
+   ``command`` is one or more of the following:
+
+
+verbose
+    :Definition: enable additional informative messages during driver operation.
+    :Possible Values: This option is a flag
+    :Default Value: disabled
+
+debug:[value]
+    :Definition: Enables various levels of debugging information
+                 The bit definitions for the debugging mask can
+                 be found in drivers/scsi/aic7xxx/aic79xx.h under
+                 the "Debug" heading.
+    :Possible Values: 0x0000 = no debugging, 0xffff = full debugging
+    :Default Value: 0x0000
+
+no_reset
+    :Definition: Do not reset the bus during the initial probe
+                 phase
+    :Possible Values: This option is a flag
+    :Default Value: disabled
+
+extended
+    :Definition: Force extended translation on the controller
+    :Possible Values: This option is a flag
+    :Default Value: disabled
+
+periodic_otag
+    :Definition: Send an ordered tag periodically to prevent
+                 tag starvation.  Needed for some older devices
+    :Possible Values: This option is a flag
+    :Default Value: disabled
+
+reverse_scan
+    :Definition: Probe the scsi bus in reverse order, starting with target 15
+    :Possible Values: This option is a flag
+    :Default Value: disabled
+
+global_tag_depth
+    :Definition: Global tag depth for all targets on all busses.
+		 This option sets the default tag depth which
+		 may be selectively overridden vi the tag_info
+		 option.
+
+    :Possible Values: 1 - 253
+    :Default Value: 32
+
+tag_info:{{value[,value...]}[,{value[,value...]}...]}
+    :Definition: Set the per-target tagged queue depth on a
+                 per controller basis.  Both controllers and targets
+                 may be omitted indicating that they should retain
+                 the default tag depth.
+
+    :Possible Values: 1 - 253
+    :Default Value: 32
+
+    Examples:
+
+
+	::
+
+	    tag_info:{{16,32,32,64,8,8,,32,32,32,32,32,32,32,32,32}
+
+	On Controller 0
+
+	    - specifies a tag depth of 16 for target 0
+	    - specifies a tag depth of 64 for target 3
+	    - specifies a tag depth of 8 for targets 4 and 5
+	    - leaves target 6 at the default
+	    - specifies a tag depth of 32 for targets 1,2,7-15
+
+	All other targets retain the default depth.
+
+	::
+
+	    tag_info:{{},{32,,32}}
+
+	On Controller 1
+
+	    - specifies a tag depth of 32 for targets 0 and 2
+
+	All other targets retain the default depth.
+
+
+rd_strm: {rd_strm_bitmask[,rd_strm_bitmask...]}
+    :Definition: Enable read streaming on a per target basis.
+		 The rd_strm_bitmask is a 16 bit hex value in which
+		 each bit represents a target.  Setting the target's
+		 bit to '1' enables read streaming for that
+		 target.  Controllers may be omitted indicating that
+		 they should retain the default read streaming setting.
+
+    Examples:
+
+	    ::
+
+		rd_strm:{0x0041}
+
+	    On Controller 0
+
+		- enables read streaming for targets 0 and 6.
+		- disables read streaming for targets 1-5,7-15.
+
+	    All other targets retain the default read
+	    streaming setting.
+
+	    ::
+
+		rd_strm:{0x0023,,0xFFFF}
+
+	    On Controller 0
+
+		- enables read streaming for targets 1,2, and 5.
+		- disables read streaming for targets 3,4,6-15.
+
+	    On Controller 2
+
+		- enables read streaming for all targets.
+
+	    All other targets retain the default read
+	    streaming setting.
+
+    :Possible Values: 0x0000 - 0xffff
+    :Default Value: 0x0000
+
+dv: {value[,value...]}
+    :Definition: Set Domain Validation Policy on a per-controller basis.
+                 Controllers may be omitted indicating that
+                 they should retain the default read streaming setting.
+
+     :Possible Values:
+
+		      ==== ===============================
+		       < 0 Use setting from serial EEPROM.
+                         0 Disable DV
+		       > 0 Enable DV
+		      ==== ===============================
+
+    :Default Value: DV Serial EEPROM configuration setting.
+
+    Example:
+
+	::
+
+	    dv:{-1,0,,1,1,0}
+
+	- On Controller 0 leave DV at its default setting.
+	- On Controller 1 disable DV.
+	- Skip configuration on Controller 2.
+	- On Controllers 3 and 4 enable DV.
+	- On Controller 5 disable DV.
+
+seltime:[value]
+    :Definition: Specifies the selection timeout value
+    :Possible Values: 0 = 256ms, 1 = 128ms, 2 = 64ms, 3 = 32ms
+    :Default Value: 0
+
+.. Warning:
+
+    The following three options should only be changed at
+    the direction of a technical support representative.
+
+
+precomp: {value[,value...]}
+    :Definition: Set IO Cell precompensation value on a per-controller basis.
+                 Controllers may be omitted indicating that
+                 they should retain the default precompensation setting.
+
+    :Possible Values: 0 - 7
+    :Default Value: Varies based on chip revision
+
+    Examples:
+
+	::
+
+	    precomp:{0x1}
+
+	On Controller 0 set precompensation to 1.
+
+	::
+
+	    precomp:{1,,7}
+
+	- On Controller 0 set precompensation to 1.
+	- On Controller 2 set precompensation to 8.
+
+slewrate: {value[,value...]}
+    :Definition: Set IO Cell slew rate on a per-controller basis.
+                      Controllers may be omitted indicating that
+                      they should retain the default slew rate setting.
+
+    :Possible Values: 0 - 15
+    :Default Value: Varies based on chip revision
+
+    Examples:
+
+	::
+
+	    slewrate:{0x1}
+
+	- On Controller 0 set slew rate to 1.
+
+	::
+
+	    slewrate :{1,,8}
+
+	- On Controller 0 set slew rate to 1.
+	- On Controller 2 set slew rate to 8.
+
+amplitude: {value[,value...]}
+    :Definition: Set IO Cell signal amplitude on a per-controller basis.
+                 Controllers may be omitted indicating that
+                 they should retain the default read streaming setting.
+
+    :Possible Values: 1 - 7
+    :Default Value: Varies based on chip revision
+
+    Examples:
+
+    ::
+
+	amplitude:{0x1}
+
+    On Controller 0 set amplitude to 1.
+
+    ::
+
+	amplitude :{1,,7}
+
+    - On Controller 0 set amplitude to 1.
+    - On Controller 2 set amplitude to 7.
+
+Example::
+
+    options aic79xx aic79xx=verbose,rd_strm:{{0x0041}}
+
+enables verbose output in the driver and turns read streaming on
+for targets 0 and 6 of Controller 0.
+
+4. Additional Notes
+===================
+
+4.1. Known/Unresolved or FYI Issues
+-----------------------------------
+
+        * Under SuSE Linux Enterprise 7, the driver may fail to operate
+          correctly due to a problem with PCI interrupt routing in the
+          Linux kernel.  Please contact SuSE for an updated Linux
+          kernel.
+
+4.2. Third-Party Compatibility Issues
+-------------------------------------
+
+        * Adaptec only supports Ultra320 hard drives running
+          the latest firmware available. Please check with
+          your hard drive manufacturer to ensure you have the
+          latest version.
+
+4.3. Operating System or Technology Limitations
+-----------------------------------------------
+
+        * PCI Hot Plug is untested and may cause the operating system
+          to stop responding.
+        * Luns that are not numbered contiguously starting with 0 might not
+          be automatically probed during system startup.  This is a limitation
+          of the OS.  Please contact your Linux vendor for instructions on
+          manually probing non-contiguous luns.
+        * Using the Driver Update Disk version of this package during OS
+          installation under RedHat might result in two versions of this
+          driver being installed into the system module directory.  This
+          might cause problems with the /sbin/mkinitrd program and/or
+          other RPM packages that try to install system modules.  The best
+          way to correct this once the system is running is to install
+          the latest RPM package version of this driver, available from
+          http://www.adaptec.com.
+
+
+5. Adaptec Customer Support
+===========================
+
+   A Technical Support Identification (TSID) Number is required for
+   Adaptec technical support.
+
+    - The 12-digit TSID can be found on the white barcode-type label
+      included inside the box with your product.  The TSID helps us
+      provide more efficient service by accurately identifying your
+      product and support status.
+
+   Support Options
+    - Search the Adaptec Support Knowledgebase (ASK) at
+      http://ask.adaptec.com for articles, troubleshooting tips, and
+      frequently asked questions about your product.
+    - For support via Email, submit your question to Adaptec's
+      Technical Support Specialists at http://ask.adaptec.com/.
+
+   North America
+    - Visit our Web site at http://www.adaptec.com/.
+    - For information about Adaptec's support options, call
+      408-957-2550, 24 hours a day, 7 days a week.
+    - To speak with a Technical Support Specialist,
+
+      * For hardware products, call 408-934-7274,
+        Monday to Friday, 3:00 am to 5:00 pm, PDT.
+      * For RAID and Fibre Channel products, call 321-207-2000,
+        Monday to Friday, 3:00 am to 5:00 pm, PDT.
+
+      To expedite your service, have your computer with you.
+    - To order Adaptec products, including accessories and cables,
+      call 408-957-7274.  To order cables online go to
+      http://www.adaptec.com/buy-cables/.
+
+   Europe
+    - Visit our Web site at http://www.adaptec.com/en-US/_common/world_index.
+    - To speak with a Technical Support Specialist, call, or email,
+
+      * German:  +49 89 4366 5522, Monday-Friday, 9:00-17:00 CET,
+        http://ask-de.adaptec.com/.
+      * French:  +49 89 4366 5533, Monday-Friday, 9:00-17:00 CET,
+	http://ask-fr.adaptec.com/.
+      * English: +49 89 4366 5544, Monday-Friday, 9:00-17:00 GMT,
+	http://ask.adaptec.com/.
+
+    - You can order Adaptec cables online at
+      http://www.adaptec.com/buy-cables/.
+
+   Japan
+    - Visit our web site at http://www.adaptec.co.jp/.
+    - To speak with a Technical Support Specialist, call
+      +81 3 5308 6120, Monday-Friday, 9:00 a.m. to 12:00 p.m.,
+      1:00 p.m. to 6:00 p.m.
+
+Copyright |copy| 2003 Adaptec Inc. 691 S. Milpitas Blvd., Milpitas CA 95035 USA.
+All rights reserved.
+
+You are permitted to redistribute, use and modify this README file in whole
+or in part in conjunction with redistribution of software governed by the
+General Public License, provided that the following conditions are met:
+
+1. Redistributions of README file must retain the above copyright
+   notice, this list of conditions, and the following disclaimer,
+   without modification.
+2. The name of the author may not be used to endorse or promote products
+   derived from this software without specific prior written permission.
+3. Modifications or new contributions must be attributed in a copyright
+   notice identifying the author ("Contributor") and added below the
+   original copyright notice. The copyright notice is for purposes of
+   identifying contributors and should not be deemed as permission to alter
+   the permissions given by Adaptec.
+
+THIS README FILE IS PROVIDED BY ADAPTEC AND CONTRIBUTORS ``AS IS`` AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ANY
+WARRANTIES OF NON-INFRINGEMENT OR THE IMPLIED WARRANTIES OF MERCHANTABILITY
+AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
+ADAPTEC OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS README
+FILE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
diff --git a/Documentation/scsi/aic79xx.txt b/Documentation/scsi/aic79xx.txt
deleted file mode 100644
index e2d3273..0000000
--- a/Documentation/scsi/aic79xx.txt
+++ /dev/null
@@ -1,497 +0,0 @@
-====================================================================
-=             Adaptec Ultra320 Family Manager Set                  =
-=                                                                  =
-=                            README for                            =
-=                    The Linux Operating System                    =
-====================================================================
-
-The following information is available in this file:
-
-  1. Supported Hardware
-  2. Version History
-  3. Command Line Options
-  4. Additional Notes
-  5. Contacting Adaptec
-
-
-1. Supported Hardware
-
-   The following Adaptec SCSI Host Adapters are supported by this 
-   driver set. 
-
-   Ultra320 ASIC              Description
-   ----------------------------------------------------------------
-   AIC-7901A                  Single Channel 64-bit PCI-X 133MHz to 
-                              Ultra320 SCSI ASIC
-   AIC-7901B                  Single Channel 64-bit PCI-X 133MHz to 
-                              Ultra320 SCSI ASIC with Retained Training
-   AIC-7902A4                 Dual Channel 64-bit PCI-X 133MHz to 
-                              Ultra320 SCSI ASIC
-   AIC-7902B                  Dual Channel 64-bit PCI-X 133MHz to
-                              Ultra320 SCSI ASIC with Retained Training
-
-   Ultra320 Adapters          Description                              ASIC
-   --------------------------------------------------------------------------
-   Adaptec SCSI Card 39320    Dual Channel 64-bit PCI-X 133MHz to   7902A4/7902B
-                              Ultra320 SCSI Card (one external 
-                              68-pin, two internal 68-pin)
-   Adaptec SCSI Card 39320A   Dual Channel 64-bit PCI-X 133MHz to      7902B
-                              Ultra320 SCSI Card (one external 
-                              68-pin, two internal 68-pin)
-   Adaptec SCSI Card 39320D   Dual Channel 64-bit PCI-X 133MHz to      7902A4
-                              Ultra320 SCSI Card (two external VHDC
-                              and one internal 68-pin)
-   Adaptec SCSI Card 39320D   Dual Channel 64-bit PCI-X 133MHz to      7902A4
-                              Ultra320 SCSI Card (two external VHDC
-                              and one internal 68-pin) based on the
-                              AIC-7902B ASIC
-   Adaptec SCSI Card 29320    Single Channel 64-bit PCI-X 133MHz to    7901A
-                              Ultra320 SCSI Card (one external 
-                              68-pin, two internal 68-pin, one
-                              internal 50-pin)
-   Adaptec SCSI Card 29320A   Single Channel 64-bit PCI-X 133MHz to    7901B
-                              Ultra320 SCSI Card (one external 
-                              68-pin, two internal 68-pin, one
-                              internal 50-pin)
-   Adaptec SCSI Card 29320LP  Single Channel 64-bit Low Profile        7901A
-                              PCI-X 133MHz to Ultra320 SCSI Card
-                              (One external VHDC, one internal
-                              68-pin)
-   Adaptec SCSI Card 29320ALP Single Channel 64-bit Low Profile        7901B
-                              PCI-X 133MHz to Ultra320 SCSI Card
-                              (One external VHDC, one internal
-                              68-pin)
-2. Version History
-
-   3.0	  (December 1st, 2005)
-	- Updated driver to use SCSI transport class infrastructure
-	- Upported sequencer and core fixes from adaptec released
-	  version 2.0.15 of the driver.
-
-   1.3.11 (July 11, 2003)
-        - Fix several deadlock issues.
-        - Add 29320ALP and 39320B Id's.
-
-   1.3.10 (June 3rd, 2003)
-        - Align the SCB_TAG field on a 16byte boundary.  This avoids
-          SCB corruption on some PCI-33 busses.
-        - Correct non-zero luns on Rev B. hardware.
-        - Update for change in 2.5.X SCSI proc FS interface.
-        - When negotiation async via an 8bit WDTR message, send
-          an SDTR with an offset of 0 to be sure the target
-          knows we are async.  This works around a firmware defect
-          in the Quantum Atlas 10K.
-        - Implement controller suspend and resume.
-        - Clear PCI error state during driver attach so that we
-          don't disable memory mapped I/O due to a stray write
-          by some other driver probe that occurred before we
-          claimed the controller.
-
-   1.3.9 (May 22nd, 2003)
-        - Fix compiler errors.
-        - Remove S/G splitting for segments that cross a 4GB boundary.
-          This is guaranteed not to happen in Linux.
-        - Add support for scsi_report_device_reset() found in
-          2.5.X kernels.
-        - Add 7901B support.
-        - Simplify handling of the packetized lun Rev A workaround.
-        - Correct and simplify handling of the ignore wide residue
-          message.  The previous code would fail to report a residual
-          if the transaction data length was even and we received
-          an IWR message.
-
-   1.3.8 (April 29th, 2003)
-        - Fix types accessed via the command line interface code.
-        - Perform a few firmware optimizations.
-        - Fix "Unexpected PKT busfree" errors.
-        - Use a sequencer interrupt to notify the host of
-          commands with bad status.  We defer the notification
-          until there are no outstanding selections to ensure
-          that the host is interrupted for as short a time as
-          possible.
-        - Remove pre-2.2.X support.
-        - Add support for new 2.5.X interrupt API.
-        - Correct big-endian architecture support.
-
-   1.3.7 (April 16th, 2003)
-        - Use del_timer_sync() to ensure that no timeouts
-          are pending during controller shutdown.
-        - For pre-2.5.X kernels, carefully adjust our segment
-          list size to avoid SCSI malloc pool fragmentation.
-        - Cleanup channel display in our /proc output.
-        - Workaround duplicate device entries in the mid-layer
-          device list during add-single-device.
-
-   1.3.6 (March 28th, 2003)
-        - Correct a double free in the Domain Validation code.
-        - Correct a reference to free'ed memory during controller
-          shutdown.
-        - Reset the bus on an SE->LVD change.  This is required
-          to reset our transceivers.
-
-   1.3.5 (March 24th, 2003)
-        - Fix a few register window mode bugs.
-        - Include read streaming in the PPR flags we display in
-          diagnostics as well as /proc.
-        - Add PCI hot plug support for 2.5.X kernels.
-        - Correct default precompensation value for RevA hardware.
-        - Fix Domain Validation thread shutdown.
-        - Add a firmware workaround to make the LED blink
-          brighter during packetized operations on the H2A4.
-        - Correct /proc display of user read streaming settings.
-        - Simplify driver locking by releasing the io_request_lock
-          upon driver entry from the mid-layer.
-        - Cleanup command line parsing and move much of this code
-          to aiclib.
-
-   1.3.4 (February 28th, 2003)
-        - Correct a race condition in our error recovery handler.
-        - Allow Test Unit Ready commands to take a full 5 seconds
-          during Domain Validation.
-
-   1.3.2 (February 19th, 2003)
-        - Correct a Rev B. regression due to the GEM318
-          compatibility fix included in 1.3.1.
-          
-   1.3.1 (February 11th, 2003)
-        - Add support for the 39320A.
-        - Improve recovery for certain PCI-X errors.
-        - Fix handling of LQ/DATA/LQ/DATA for the
-          same write transaction that can occur without
-          interveining training.
-        - Correct compatibility issues with the GEM318
-          enclosure services device.
-        - Correct data corruption issue that occurred under
-          high tag depth write loads.
-        - Adapt to a change in the 2.5.X daemonize() API.
-        - Correct a "Missing case in ahd_handle_scsiint" panic.
-
-   1.3.0 (January 21st, 2003)
-        - Full regression testing for all U320 products completed.
-        - Added abort and target/lun reset error recovery handler and
-          interrupt coalescing.
-
-   1.2.0 (November 14th, 2002)
-        - Added support for Domain Validation
-        - Add support for the Hewlett-Packard version of the 39320D
-          and AIC-7902 adapters.
-        Support for previous adapters has not been fully tested and should
-        only be used at the customer's own risk.
-
-   1.1.1 (September 24th, 2002)
-        - Added support for the Linux 2.5.X kernel series
-
-   1.1.0 (September 17th, 2002)
-        - Added support for four additional SCSI products:
-          ASC-39320, ASC-29320, ASC-29320LP, AIC-7901.
-
-   1.0.0 (May 30th, 2002)
-        - Initial driver release.
-
-   2.1. Software/Hardware Features
-        - Support for the SPI-4 "Ultra320" standard:
-          - 320MB/s transfer rates
-          - Packetized SCSI Protocol at 160MB/s and 320MB/s
-          - Quick Arbitration Selection (QAS)
-          - Retained Training Information (Rev B. ASIC only)
-        - Interrupt Coalescing
-        - Initiator Mode (target mode not currently 
-          supported)
-        - Support for the PCI-X standard up to 133MHz
-        - Support for the PCI v2.2 standard
-        - Domain Validation
-
-   2.2. Operating System Support:
-        - Redhat Linux 7.2, 7.3, 8.0, Advanced Server 2.1
-        - SuSE Linux 7.3, 8.0, 8.1, Enterprise Server 7
-        - only Intel and AMD x86 supported at this time
-        - >4GB memory configurations supported.
-
-     Refer to the User's Guide for more details on this.
-
-3. Command Line Options
-
-        WARNING: ALTERING OR ADDING THESE DRIVER PARAMETERS
-                 INCORRECTLY CAN RENDER YOUR SYSTEM INOPERABLE.
-                 USE THEM WITH CAUTION. 
-
-   Put a .conf file in the /etc/modprobe.d/ directory and add/edit a
-   line containing 'options aic79xx aic79xx=[command[,command...]]' where
-   'command' is one or more of the following:
-   -----------------------------------------------------------------
-              Option: verbose
-          Definition: enable additional informative messages during
-                      driver operation.
-     Possible Values: This option is a flag
-       Default Value: disabled
-   -----------------------------------------------------------------
-              Option: debug:[value]
-          Definition: Enables various levels of debugging information
-                      The bit definitions for the debugging mask can
-                      be found in drivers/scsi/aic7xxx/aic79xx.h under
-                      the "Debug" heading.
-     Possible Values: 0x0000 = no debugging, 0xffff = full debugging
-       Default Value: 0x0000
-   -----------------------------------------------------------------
-              Option: no_reset
-          Definition: Do not reset the bus during the initial probe
-                      phase
-     Possible Values: This option is a flag
-       Default Value: disabled
-   -----------------------------------------------------------------
-              Option: extended
-          Definition: Force extended translation on the controller
-     Possible Values: This option is a flag
-       Default Value: disabled
-   -----------------------------------------------------------------
-              Option: periodic_otag
-          Definition: Send an ordered tag periodically to prevent
-                      tag starvation.  Needed for some older devices
-     Possible Values: This option is a flag
-       Default Value: disabled
-   -----------------------------------------------------------------
-              Option: reverse_scan
-          Definition: Probe the scsi bus in reverse order, starting
-                      with target 15
-     Possible Values: This option is a flag
-       Default Value: disabled
-   -----------------------------------------------------------------
-              Option: global_tag_depth
-          Definition: Global tag depth for all targets on all busses.
-                      This option sets the default tag depth which
-                      may be selectively overridden vi the tag_info
-                      option.
-     Possible Values: 1 - 253
-       Default Value: 32
-   -----------------------------------------------------------------
-              Option: tag_info:{{value[,value...]}[,{value[,value...]}...]}
-          Definition: Set the per-target tagged queue depth on a
-                      per controller basis.  Both controllers and targets
-                      may be omitted indicating that they should retain
-                      the default tag depth.
-            Examples: tag_info:{{16,32,32,64,8,8,,32,32,32,32,32,32,32,32,32}
-                        On Controller 0
-                          specifies a tag depth of 16 for target 0
-                          specifies a tag depth of 64 for target 3
-                          specifies a tag depth of 8 for targets 4 and 5
-                          leaves target 6 at the default
-                          specifies a tag depth of 32 for targets 1,2,7-15
-                        All other targets retain the default depth.
-
-                      tag_info:{{},{32,,32}}
-                        On Controller 1
-                          specifies a tag depth of 32 for targets 0 and 2
-                        All other targets retain the default depth.
-                        
-     Possible Values: 1 - 253
-       Default Value: 32
-   -----------------------------------------------------------------
-              Option: rd_strm: {rd_strm_bitmask[,rd_strm_bitmask...]}
-          Definition: Enable read streaming on a per target basis.
-                      The rd_strm_bitmask is a 16 bit hex value in which
-                      each bit represents a target.  Setting the target's
-                      bit to '1' enables read streaming for that
-                      target.  Controllers may be omitted indicating that
-                      they should retain the default read streaming setting.
-             Example: rd_strm:{0x0041}
-                        On Controller 0
-                          enables read streaming for targets 0 and 6.
-                          disables read streaming for targets 1-5,7-15.
-                        All other targets retain the default read
-                        streaming setting.
-             Example: rd_strm:{0x0023,,0xFFFF}
-                        On Controller 0
-                          enables read streaming for targets 1,2, and 5.
-                          disables read streaming for targets 3,4,6-15.
-                        On Controller 2
-                          enables read streaming for all targets.
-                        All other targets retain the default read
-                        streaming setting.
-                      
-     Possible Values: 0x0000 - 0xffff
-       Default Value: 0x0000
-   -----------------------------------------------------------------
-              Option: dv: {value[,value...]}
-          Definition: Set Domain Validation Policy on a per-controller basis.
-                      Controllers may be omitted indicating that
-                      they should retain the default read streaming setting.
-             Example: dv:{-1,0,,1,1,0}
-                        On Controller 0 leave DV at its default setting.
-                        On Controller 1 disable DV.
-                        Skip configuration on Controller 2.
-                        On Controllers 3 and 4 enable DV.
-                        On Controller 5 disable DV.
-
-     Possible Values: < 0 Use setting from serial EEPROM.
-                      0 Disable DV
-                      > 0 Enable DV
-       Default Value: DV Serial EEPROM configuration setting.
-   -----------------------------------------------------------------
-              Option: seltime:[value]
-          Definition: Specifies the selection timeout value
-     Possible Values: 0 = 256ms, 1 = 128ms, 2 = 64ms, 3 = 32ms
-       Default Value: 0
-   -----------------------------------------------------------------
-
-   *** The following three options should only be changed at ***
-   *** the direction of a technical support representative.  ***
-
-   -----------------------------------------------------------------
-              Option: precomp: {value[,value...]}
-          Definition: Set IO Cell precompensation value on a per-controller
-                      basis.
-                      Controllers may be omitted indicating that
-                      they should retain the default precompensation setting.
-             Example: precomp:{0x1}
-                        On Controller 0 set precompensation to 1.
-             Example: precomp:{1,,7}
-                        On Controller 0 set precompensation to 1.
-                        On Controller 2 set precompensation to 8.
-                      
-     Possible Values: 0 - 7
-       Default Value: Varies based on chip revision
-   -----------------------------------------------------------------
-              Option: slewrate: {value[,value...]}
-          Definition: Set IO Cell slew rate on a per-controller basis.
-                      Controllers may be omitted indicating that
-                      they should retain the default slew rate setting.
-             Example: slewrate:{0x1}
-                        On Controller 0 set slew rate to 1.
-             Example: slewrate :{1,,8}
-                        On Controller 0 set slew rate to 1.
-                        On Controller 2 set slew rate to 8.
-                      
-     Possible Values: 0 - 15
-       Default Value: Varies based on chip revision
-   -----------------------------------------------------------------
-              Option: amplitude: {value[,value...]}
-          Definition: Set IO Cell signal amplitude on a per-controller basis.
-                      Controllers may be omitted indicating that
-                      they should retain the default read streaming setting.
-             Example: amplitude:{0x1}
-                        On Controller 0 set amplitude to 1.
-             Example: amplitude :{1,,7}
-                        On Controller 0 set amplitude to 1.
-                        On Controller 2 set amplitude to 7.
-                      
-     Possible Values: 1 - 7
-       Default Value: Varies based on chip revision
-   -----------------------------------------------------------------
-
-   Example: 'options aic79xx aic79xx=verbose,rd_strm:{{0x0041}}'
-        enables verbose output in the driver and turns read streaming on
-        for targets 0 and 6 of Controller 0.
-
-4. Additional Notes
-
-   4.1. Known/Unresolved or FYI Issues
-
-        * Under SuSE Linux Enterprise 7, the driver may fail to operate
-          correctly due to a problem with PCI interrupt routing in the
-          Linux kernel.  Please contact SuSE for an updated Linux
-          kernel.
-
-   4.2. Third-Party Compatibility Issues
-
-        * Adaptec only supports Ultra320 hard drives running
-          the latest firmware available. Please check with
-          your hard drive manufacturer to ensure you have the
-          latest version.
-
-   4.3. Operating System or Technology Limitations
-        
-        * PCI Hot Plug is untested and may cause the operating system 
-          to stop responding.
-        * Luns that are not numbered contiguously starting with 0 might not
-          be automatically probed during system startup.  This is a limitation
-          of the OS.  Please contact your Linux vendor for instructions on
-          manually probing non-contiguous luns.
-        * Using the Driver Update Disk version of this package during OS
-          installation under RedHat might result in two versions of this
-          driver being installed into the system module directory.  This
-          might cause problems with the /sbin/mkinitrd program and/or
-          other RPM packages that try to install system modules.  The best
-          way to correct this once the system is running is to install
-          the latest RPM package version of this driver, available from
-          http://www.adaptec.com.
-
-
-5. Adaptec Customer Support
-
-   A Technical Support Identification (TSID) Number is required for 
-   Adaptec technical support.
-    - The 12-digit TSID can be found on the white barcode-type label
-      included inside the box with your product.  The TSID helps us 
-      provide more efficient service by accurately identifying your 
-      product and support status.
-
-   Support Options
-    - Search the Adaptec Support Knowledgebase (ASK) at
-      http://ask.adaptec.com for articles, troubleshooting tips, and
-      frequently asked questions about your product.
-    - For support via Email, submit your question to Adaptec's 
-      Technical Support Specialists at http://ask.adaptec.com/.
-     
-   North America
-    - Visit our Web site at http://www.adaptec.com/.
-    - For information about Adaptec's support options, call
-      408-957-2550, 24 hours a day, 7 days a week.
-    - To speak with a Technical Support Specialist,
-      * For hardware products, call 408-934-7274,
-        Monday to Friday, 3:00 am to 5:00 pm, PDT.
-      * For RAID and Fibre Channel products, call 321-207-2000,
-        Monday to Friday, 3:00 am to 5:00 pm, PDT.
-      To expedite your service, have your computer with you.
-    - To order Adaptec products, including accessories and cables,
-      call 408-957-7274.  To order cables online go to
-      http://www.adaptec.com/buy-cables/.
-
-   Europe
-    - Visit our Web site at http://www.adaptec.com/en-US/_common/world_index.
-    - To speak with a Technical Support Specialist, call, or email,
-      * German:  +49 89 4366 5522, Monday-Friday, 9:00-17:00 CET,
-        http://ask-de.adaptec.com/.
-      * French:  +49 89 4366 5533, Monday-Friday, 9:00-17:00 CET,
-	http://ask-fr.adaptec.com/.
-      * English: +49 89 4366 5544, Monday-Friday, 9:00-17:00 GMT,
-	http://ask.adaptec.com/.
-    - You can order Adaptec cables online at
-      http://www.adaptec.com/buy-cables/.
-
-   Japan
-    - Visit our web site at http://www.adaptec.co.jp/.
-    - To speak with a Technical Support Specialist, call 
-      +81 3 5308 6120, Monday-Friday, 9:00 a.m. to 12:00 p.m.,
-      1:00 p.m. to 6:00 p.m.
-
--------------------------------------------------------------------
-/*
- * Copyright (c) 2003 Adaptec Inc. 691 S. Milpitas Blvd., Milpitas CA 95035 USA.
- * All rights reserved.
- *
- * You are permitted to redistribute, use and modify this README file in whole
- * or in part in conjunction with redistribution of software governed by the
- * General Public License, provided that the following conditions are met:
- * 1. Redistributions of README file must retain the above copyright
- *    notice, this list of conditions, and the following disclaimer,
- *    without modification.
- * 2. The name of the author may not be used to endorse or promote products
- *    derived from this software without specific prior written permission.
- * 3. Modifications or new contributions must be attributed in a copyright
- *    notice identifying the author ("Contributor") and added below the
- *    original copyright notice. The copyright notice is for purposes of
- *    identifying contributors and should not be deemed as permission to alter
- *    the permissions given by Adaptec.
- *
- * THIS README FILE IS PROVIDED BY ADAPTEC AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ANY
- * WARRANTIES OF NON-INFRINGEMENT OR THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
- * ADAPTEC OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
- * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS README
- * FILE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
diff --git a/Documentation/scsi/aic7xxx.rst b/Documentation/scsi/aic7xxx.rst
new file mode 100644
index 0000000..bad0e55
--- /dev/null
+++ b/Documentation/scsi/aic7xxx.rst
@@ -0,0 +1,458 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: <isonum.txt>
+
+========================================================
+Adaptec Aic7xxx Fast -> Ultra160 Family Manager Set v7.0
+========================================================
+
+README for The Linux Operating System
+
+The following information is available in this file:
+
+  1. Supported Hardware
+  2. Version History
+  3. Command Line Options
+  4. Contacting Adaptec
+
+1. Supported Hardware
+=====================
+
+   The following Adaptec SCSI Chips and Host Adapters are supported by
+   the aic7xxx driver.
+
+   ======== ===== ========= ======== ========= ===== ===============
+   Chip     MIPS  Host Bus  MaxSync  MaxWidth  SCBs  Notes
+   ======== ===== ========= ======== ========= ===== ===============
+   aic7770  10    EISA/VL   10MHz    16Bit      4    1
+   aic7850  10    PCI/32    10MHz    8Bit       3
+   aic7855  10    PCI/32    10MHz    8Bit       3
+   aic7856  10    PCI/32    10MHz    8Bit       3
+   aic7859  10    PCI/32    20MHz    8Bit       3
+   aic7860  10    PCI/32    20MHz    8Bit       3
+   aic7870  10    PCI/32    10MHz    16Bit      16
+   aic7880  10    PCI/32    20MHz    16Bit      16
+   aic7890  20    PCI/32    40MHz    16Bit      16      3 4 5 6 7 8
+   aic7891  20    PCI/64    40MHz    16Bit      16      3 4 5 6 7 8
+   aic7892  20    PCI/64-66 80MHz    16Bit      16      3 4 5 6 7 8
+   aic7895  15    PCI/32    20MHz    16Bit      16    2 3 4 5
+   aic7895C 15    PCI/32    20MHz    16Bit      16    2 3 4 5     8
+   aic7896  20    PCI/32    40MHz    16Bit      16    2 3 4 5 6 7 8
+   aic7897  20    PCI/64    40MHz    16Bit      16    2 3 4 5 6 7 8
+   aic7899  20    PCI/64-66 80MHz    16Bit      16    2 3 4 5 6 7 8
+   ======== ===== ========= ======== ========= ===== ===============
+
+   1.   Multiplexed Twin Channel Device - One controller servicing two
+        busses.
+   2.   Multi-function Twin Channel Device - Two controllers on one chip.
+   3.   Command Channel Secondary DMA Engine - Allows scatter gather list
+        and SCB prefetch.
+   4.   64 Byte SCB Support - Allows disconnected, untagged request table
+        for all possible target/lun combinations.
+   5.   Block Move Instruction Support - Doubles the speed of certain
+        sequencer operations.
+   6.   'Bayonet' style Scatter Gather Engine - Improves S/G prefetch
+        performance.
+   7.   Queuing Registers - Allows queuing of new transactions without
+        pausing the sequencer.
+   8.   Multiple Target IDs - Allows the controller to respond to selection
+        as a target on multiple SCSI IDs.
+
+   ============== ======= =========== =============== =============== =========
+   Controller      Chip   Host-Bus    Int-Connectors  Ext-Connectors  Notes
+   ============== ======= =========== =============== =============== =========
+   AHA-274X[A]    aic7770   EISA         SE-50M         SE-HD50F
+   AHA-274X[A]W   aic7770   EISA         SE-HD68F       SE-HD68F
+                                         SE-50M
+   AHA-274X[A]T   aic7770   EISA       2 X SE-50M       SE-HD50F
+   AHA-2842       aic7770    VL          SE-50M         SE-HD50F
+   AHA-2940AU     aic7860   PCI/32       SE-50M         SE-HD50F
+   AVA-2902I      aic7860   PCI/32       SE-50M
+   AVA-2902E      aic7860   PCI/32       SE-50M
+   AVA-2906       aic7856   PCI/32       SE-50M         SE-DB25F
+   APC-7850       aic7850   PCI/32       SE-50M                       1
+   AVA-2940       aic7860   PCI/32       SE-50M
+   AHA-2920B      aic7860   PCI/32       SE-50M
+   AHA-2930B      aic7860   PCI/32       SE-50M
+   AHA-2920C      aic7856   PCI/32       SE-50M         SE-HD50F
+   AHA-2930C      aic7860   PCI/32       SE-50M
+   AHA-2930C      aic7860   PCI/32       SE-50M
+   AHA-2910C      aic7860   PCI/32       SE-50M
+   AHA-2915C      aic7860   PCI/32       SE-50M
+   AHA-2940AU/CN  aic7860   PCI/32       SE-50M         SE-HD50F
+   AHA-2944W      aic7870   PCI/32     HVD-HD68F        HVD-HD68F
+                                       HVD-50M
+   AHA-3940W      aic7870   PCI/32     2 X SE-HD68F     SE-HD68F        2
+   AHA-2940UW     aic7880   PCI/32       SE-HD68F
+                                         SE-50M         SE-HD68F
+   AHA-2940U      aic7880   PCI/32       SE-50M         SE-HD50F
+   AHA-2940D      aic7880   PCI/32
+   aHA-2940 A/T   aic7880   PCI/32
+   AHA-2940D A/T  aic7880   PCI/32
+   AHA-3940UW     aic7880   PCI/32     2 X SE-HD68F     SE-HD68F          3
+   AHA-3940UWD    aic7880   PCI/32     2 X SE-HD68F   2 X SE-VHD68F       3
+   AHA-3940U      aic7880   PCI/32     2 X SE-50M       SE-HD50F          3
+   AHA-2944UW     aic7880   PCI/32      HVD-HD68F       HVD-HD68F
+                                        HVD-50M
+   AHA-3944UWD    aic7880   PCI/32     2 X HVD-HD68F  2 X HVD-VHD68F      3
+   AHA-4944UW     aic7880   PCI/32
+   AHA-2930UW     aic7880   PCI/32
+   AHA-2940UW Pro aic7880   PCI/32      SE-HD68F        SE-HD68F            4
+                                        SE-50M
+   AHA-2940UW/CN  aic7880   PCI/32
+   AHA-2940UDual  aic7895   PCI/32
+   AHA-2940UWDual aic7895   PCI/32
+   AHA-3940UWD    aic7895   PCI/32
+   AHA-3940AUW    aic7895   PCI/32
+   AHA-3940AUWD   aic7895   PCI/32
+   AHA-3940AU     aic7895   PCI/32
+   AHA-3944AUWD   aic7895   PCI/32     2 X HVD-HD68F  2 X HVD-VHD68F
+   AHA-2940U2B    aic7890   PCI/32      LVD-HD68F       LVD-HD68F
+   AHA-2940U2 OEM aic7891   PCI/64
+   AHA-2940U2W    aic7890   PCI/32      LVD-HD68F       LVD-HD68F
+                                        SE-HD68F
+                                        SE-50M
+   AHA-2950U2B    aic7891   PCI/64      LVD-HD68F       LVD-HD68F
+   AHA-2930U2     aic7890   PCI/32      LVD-HD68F       SE-HD50F
+                                        SE-50M
+   AHA-3950U2B    aic7897   PCI/64
+   AHA-3950U2D    aic7897   PCI/64
+   AHA-29160      aic7892   PCI/64-66
+   AHA-29160 CPQ  aic7892   PCI/64-66
+   AHA-29160N     aic7892   PCI/32      LVD-HD68F       SE-HD50F
+                                        SE-50M
+   AHA-29160LP    aic7892   PCI/64-66
+   AHA-19160      aic7892   PCI/64-66
+   AHA-29150LP    aic7892   PCI/64-66
+   AHA-29130LP    aic7892   PCI/64-66
+   AHA-3960D      aic7899   PCI/64-66  2 X LVD-HD68F  2 X LVD-VHD68F
+                                       LVD-50M
+   AHA-3960D CPQ  aic7899   PCI/64-66  2 X LVD-HD68F  2 X LVD-VHD68F
+                                       LVD-50M
+   AHA-39160      aic7899   PCI/64-66  2 X LVD-HD68F  2 X LVD-VHD68F
+                                       LVD-50M
+   ============== ======= =========== =============== =============== =========
+
+   1. No BIOS support
+   2. DEC21050 PCI-PCI bridge with multiple controller chips on secondary bus
+   3. DEC2115X PCI-PCI bridge with multiple controller chips on secondary bus
+   4. All three SCSI connectors may be used simultaneously without
+      SCSI "stub" effects.
+
+2. Version History
+==================
+
+   * 7.0	  (4th August, 2005)
+	- Updated driver to use SCSI transport class infrastructure
+	- Upported sequencer and core fixes from last adaptec released
+	  version of the driver.
+
+   * 6.2.36 (June 3rd, 2003)
+        - Correct code that disables PCI parity error checking.
+        - Correct and simplify handling of the ignore wide residue
+          message.  The previous code would fail to report a residual
+          if the transaction data length was even and we received
+          an IWR message.
+        - Add support for the 2.5.X EISA framework.
+        - Update for change in 2.5.X SCSI proc FS interface.
+        - Correct Domain Validation command-line option parsing.
+        - When negotiation async via an 8bit WDTR message, send
+          an SDTR with an offset of 0 to be sure the target
+          knows we are async.  This works around a firmware defect
+          in the Quantum Atlas 10K.
+        - Clear PCI error state during driver attach so that we
+          don't disable memory mapped I/O due to a stray write
+          by some other driver probe that occurred before we
+          claimed the controller.
+
+   * 6.2.35 (May 14th, 2003)
+        - Fix a few GCC 3.3 compiler warnings.
+        - Correct operation on EISA Twin Channel controller.
+        - Add support for 2.5.X's scsi_report_device_reset().
+
+   * 6.2.34 (May 5th, 2003)
+        - Fix locking regression introduced in 6.2.29 that
+          could cause a lock order reversal between the io_request_lock
+          and our per-softc lock.  This was only possible on RH9,
+          SuSE, and kernel.org 2.4.X kernels.
+
+   * 6.2.33 (April 30th, 2003)
+        - Dynamically disable PCI parity error reporting after
+          10 errors are reported to the user.  These errors are
+          the result of some other device issuing PCI transactions
+          with bad parity.  Once the user has been informed of the
+          problem, continuing to report the errors just degrades
+          our performance.
+
+   * 6.2.32 (March 28th, 2003)
+        - Dynamically sized S/G lists to avoid SCSI malloc
+          pool fragmentation and SCSI mid-layer deadlock.
+
+   * 6.2.28 (January 20th, 2003)
+        - Domain Validation Fixes
+        - Add ability to disable PCI parity error checking.
+        - Enhanced Memory Mapped I/O probe
+
+   * 6.2.20 (November 7th, 2002)
+        - Added Domain Validation.
+
+3. Command Line Options
+=======================
+
+
+    .. Warning::
+
+                 ALTERING OR ADDING THESE DRIVER PARAMETERS
+                 INCORRECTLY CAN RENDER YOUR SYSTEM INOPERABLE.
+                 USE THEM WITH CAUTION.
+
+   Put a .conf file in the /etc/modprobe.d directory and add/edit a
+   line containing ``options aic7xxx aic7xxx=[command[,command...]]`` where
+   ``command`` is one or more of the following:
+
+verbose
+
+    :Definition: enable additional informative messages during driver operation.
+    :Possible Values: This option is a flag
+    :Default Value: disabled
+
+
+debug:[value]
+
+    :Definition: Enables various levels of debugging information
+    :Possible Values: 0x0000 = no debugging, 0xffff = full debugging
+    :Default Value: 0x0000
+
+no_probe
+
+probe_eisa_vl
+
+    :Definition: Do not probe for EISA/VLB controllers.
+		 This is a toggle.  If the driver is compiled
+		 to not probe EISA/VLB controllers by default,
+		 specifying "no_probe" will enable this probing.
+		 If the driver is compiled to probe EISA/VLB
+		 controllers by default, specifying "no_probe"
+		 will disable this probing.
+
+    :Possible Values: This option is a toggle
+    :Default Value: EISA/VLB probing is disabled by default.
+
+pci_parity
+
+    :Definition: Toggles the detection of PCI parity errors.
+		 On many motherboards with VIA chipsets,
+		 PCI parity is not generated correctly on the
+		 PCI bus.  It is impossible for the hardware to
+		 differentiate between these "spurious" parity
+		 errors and real parity errors.  The symptom of
+		 this problem is a stream of the message::
+
+		    "scsi0:	Data Parity Error Detected during address or write data phase"
+
+		 output by the driver.
+
+    :Possible Values: This option is a toggle
+    :Default Value: PCI Parity Error reporting is disabled
+
+no_reset
+
+    :Definition: Do not reset the bus during the initial probe
+		 phase
+
+    :Possible Values: This option is a flag
+    :Default Value: disabled
+
+extended
+
+    :Definition: Force extended translation on the controller
+    :Possible Values: This option is a flag
+    :Default Value: disabled
+
+periodic_otag
+
+    :Definition: Send an ordered tag periodically to prevent
+		 tag starvation.  Needed for some older devices
+
+    :Possible Values: This option is a flag
+    :Default Value: disabled
+
+reverse_scan
+
+    :Definition: Probe the scsi bus in reverse order, starting
+		with target 15
+
+    :Possible Values: This option is a flag
+    :Default Value: disabled
+
+global_tag_depth:[value]
+
+    :Definition: Global tag depth for all targets on all busses.
+		 This option sets the default tag depth which
+		 may be selectively overridden vi the tag_info
+		 option.
+
+    :Possible Values: 1 - 253
+    :Default Value: 32
+
+tag_info:{{value[,value...]}[,{value[,value...]}...]}
+
+    :Definition: Set the per-target tagged queue depth on a
+		 per controller basis.  Both controllers and targets
+		 may be omitted indicating that they should retain
+		 the default tag depth.
+
+    :Possible Values: 1 - 253
+    :Default Value: 32
+
+    Examples:
+
+	    ::
+
+	        tag_info:{{16,32,32,64,8,8,,32,32,32,32,32,32,32,32,32}
+
+	    On Controller 0:
+
+		- specifies a tag depth of 16 for target 0
+		- specifies a tag depth of 64 for target 3
+		- specifies a tag depth of 8 for targets 4 and 5
+		- leaves target 6 at the default
+		- specifies a tag depth of 32 for targets 1,2,7-15
+		- All other targets retain the default depth.
+
+	    ::
+
+                tag_info:{{},{32,,32}}
+
+	    On Controller 1:
+
+		- specifies a tag depth of 32 for targets 0 and 2
+		- All other targets retain the default depth.
+
+seltime:[value]
+
+    :Definition: Specifies the selection timeout value
+    :Possible Values: 0 = 256ms, 1 = 128ms, 2 = 64ms, 3 = 32ms
+    :Default Value: 0
+
+dv: {value[,value...]}
+
+    :Definition: Set Domain Validation Policy on a per-controller basis.
+		 Controllers may be omitted indicating that
+		 they should retain the default read streaming setting.
+
+    :Possible Values:
+
+		      ==== ===============================
+		       < 0 Use setting from serial EEPROM.
+                         0 Disable DV
+		       > 0 Enable DV
+		      ==== ===============================
+
+
+    :Default Value: SCSI-Select setting on controllers with a SCSI Select
+		    option for DV.  Otherwise, on for controllers supporting
+		    U160 speeds and off for all other controller types.
+
+    Example:
+
+	    ::
+
+		dv:{-1,0,,1,1,0}
+
+	   - On Controller 0 leave DV at its default setting.
+	   - On Controller 1 disable DV.
+	   - Skip configuration on Controller 2.
+	   - On Controllers 3 and 4 enable DV.
+	   - On Controller 5 disable DV.
+
+Example::
+
+    options aic7xxx aic7xxx=verbose,no_probe,tag_info:{{},{,,10}},seltime:1
+
+enables verbose logging, Disable EISA/VLB probing,
+and set tag depth on Controller 1/Target 2 to 10 tags.
+
+4. Adaptec Customer Support
+===========================
+
+   A Technical Support Identification (TSID) Number is required for
+   Adaptec technical support.
+
+    - The 12-digit TSID can be found on the white barcode-type label
+      included inside the box with your product.  The TSID helps us
+      provide more efficient service by accurately identifying your
+      product and support status.
+
+   Support Options
+    - Search the Adaptec Support Knowledgebase (ASK) at
+      http://ask.adaptec.com for articles, troubleshooting tips, and
+      frequently asked questions about your product.
+    - For support via Email, submit your question to Adaptec's
+      Technical Support Specialists at http://ask.adaptec.com/.
+
+   North America
+    - Visit our Web site at http://www.adaptec.com/.
+    - For information about Adaptec's support options, call
+      408-957-2550, 24 hours a day, 7 days a week.
+    - To speak with a Technical Support Specialist,
+
+      * For hardware products, call 408-934-7274,
+        Monday to Friday, 3:00 am to 5:00 pm, PDT.
+      * For RAID and Fibre Channel products, call 321-207-2000,
+        Monday to Friday, 3:00 am to 5:00 pm, PDT.
+
+      To expedite your service, have your computer with you.
+    - To order Adaptec products, including accessories and cables,
+      call 408-957-7274.  To order cables online go to
+      http://www.adaptec.com/buy-cables/.
+
+   Europe
+    - Visit our Web site at http://www.adaptec.com/en-US/_common/world_index.
+    - To speak with a Technical Support Specialist, call, or email,
+
+      * German:  +49 89 4366 5522, Monday-Friday, 9:00-17:00 CET,
+        http://ask-de.adaptec.com/.
+      * French:  +49 89 4366 5533, Monday-Friday, 9:00-17:00 CET,
+	http://ask-fr.adaptec.com/.
+      * English: +49 89 4366 5544, Monday-Friday, 9:00-17:00 GMT,
+	http://ask.adaptec.com/.
+
+    - You can order Adaptec cables online at
+      http://www.adaptec.com/buy-cables/.
+
+   Japan
+    - Visit our web site at http://www.adaptec.co.jp/.
+    - To speak with a Technical Support Specialist, call
+      +81 3 5308 6120, Monday-Friday, 9:00 a.m. to 12:00 p.m.,
+      1:00 p.m. to 6:00 p.m.
+
+Copyright |copy| 2003 Adaptec Inc. 691 S. Milpitas Blvd., Milpitas CA 95035 USA.
+
+All rights reserved.
+
+You are permitted to redistribute, use and modify this README file in whole
+or in part in conjunction with redistribution of software governed by the
+General Public License, provided that the following conditions are met:
+
+1. Redistributions of README file must retain the above copyright
+   notice, this list of conditions, and the following disclaimer,
+   without modification.
+2. The name of the author may not be used to endorse or promote products
+   derived from this software without specific prior written permission.
+3. Modifications or new contributions must be attributed in a copyright
+   notice identifying the author ("Contributor") and added below the
+   original copyright notice. The copyright notice is for purposes of
+   identifying contributors and should not be deemed as permission to alter
+   the permissions given by Adaptec.
+
+THIS README FILE IS PROVIDED BY ADAPTEC AND CONTRIBUTORS ``AS IS`` AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ANY
+WARRANTIES OF NON-INFRINGEMENT OR THE IMPLIED WARRANTIES OF MERCHANTABILITY
+AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
+ADAPTEC OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS README
+FILE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
diff --git a/Documentation/scsi/aic7xxx.txt b/Documentation/scsi/aic7xxx.txt
deleted file mode 100644
index 7c5d022..0000000
--- a/Documentation/scsi/aic7xxx.txt
+++ /dev/null
@@ -1,394 +0,0 @@
-====================================================================
-=    Adaptec Aic7xxx Fast -> Ultra160 Family Manager Set v7.0      =
-=                            README for                            =
-=                     The Linux Operating System                   =
-====================================================================
-
-The following information is available in this file:
-
-  1. Supported Hardware
-  2. Version History
-  3. Command Line Options
-  4. Contacting Adaptec
-
-1. Supported Hardware
-
-   The following Adaptec SCSI Chips and Host Adapters are supported by
-   the aic7xxx driver. 
-
-   Chip    MIPS  Host Bus  MaxSync  MaxWidth  SCBs  Notes
-   ---------------------------------------------------------------
-   aic7770  10    EISA/VL   10MHz    16Bit      4   1
-   aic7850  10    PCI/32    10MHz    8Bit       3
-   aic7855  10    PCI/32    10MHz    8Bit       3
-   aic7856  10    PCI/32    10MHz    8Bit       3
-   aic7859  10    PCI/32    20MHz    8Bit       3
-   aic7860  10    PCI/32    20MHz    8Bit       3
-   aic7870  10    PCI/32    10MHz    16Bit      16
-   aic7880  10    PCI/32    20MHz    16Bit      16
-   aic7890  20    PCI/32    40MHz    16Bit      16      3 4 5 6 7 8
-   aic7891  20    PCI/64    40MHz    16Bit      16      3 4 5 6 7 8
-   aic7892  20   PCI/64-66  80MHz    16Bit      16      3 4 5 6 7 8
-   aic7895  15    PCI/32    20MHz    16Bit      16    2 3 4 5
-   aic7895C 15    PCI/32    20MHz    16Bit      16    2 3 4 5     8
-   aic7896  20    PCI/32    40MHz    16Bit      16    2 3 4 5 6 7 8
-   aic7897  20    PCI/64    40MHz    16Bit      16    2 3 4 5 6 7 8
-   aic7899  20   PCI/64-66  80MHz    16Bit      16    2 3 4 5 6 7 8
-
-   1.   Multiplexed Twin Channel Device - One controller servicing two
-        busses.
-   2.   Multi-function Twin Channel Device - Two controllers on one chip.
-   3.   Command Channel Secondary DMA Engine - Allows scatter gather list
-        and SCB prefetch.
-   4.   64 Byte SCB Support - Allows disconnected, untagged request table
-        for all possible target/lun combinations.
-   5.   Block Move Instruction Support - Doubles the speed of certain
-        sequencer operations.
-   6.   `Bayonet' style Scatter Gather Engine - Improves S/G prefetch
-        performance.
-   7.   Queuing Registers - Allows queuing of new transactions without
-        pausing the sequencer.
-   8.   Multiple Target IDs - Allows the controller to respond to selection
-        as a target on multiple SCSI IDs.
-
-   Controller      Chip   Host-Bus    Int-Connectors  Ext-Connectors  Notes
-   --------------------------------------------------------------------------
-   AHA-274X[A]    aic7770   EISA         SE-50M         SE-HD50F
-   AHA-274X[A]W   aic7770   EISA         SE-HD68F       SE-HD68F
-                                         SE-50M
-   AHA-274X[A]T   aic7770   EISA       2 X SE-50M       SE-HD50F
-   AHA-2842       aic7770    VL          SE-50M         SE-HD50F
-   AHA-2940AU     aic7860   PCI/32       SE-50M         SE-HD50F
-   AVA-2902I      aic7860   PCI/32       SE-50M
-   AVA-2902E      aic7860   PCI/32       SE-50M
-   AVA-2906       aic7856   PCI/32       SE-50M         SE-DB25F
-   APC-7850       aic7850   PCI/32       SE-50M                       1
-   AVA-2940       aic7860   PCI/32       SE-50M
-   AHA-2920B      aic7860   PCI/32       SE-50M
-   AHA-2930B      aic7860   PCI/32       SE-50M
-   AHA-2920C      aic7856   PCI/32       SE-50M         SE-HD50F
-   AHA-2930C      aic7860   PCI/32       SE-50M
-   AHA-2930C      aic7860   PCI/32       SE-50M
-   AHA-2910C      aic7860   PCI/32       SE-50M
-   AHA-2915C      aic7860   PCI/32       SE-50M
-   AHA-2940AU/CN  aic7860   PCI/32       SE-50M         SE-HD50F
-   AHA-2944W      aic7870   PCI/32     HVD-HD68F        HVD-HD68F
-                                        HVD-50M
-   AHA-3940W      aic7870   PCI/32     2 X SE-HD68F     SE-HD68F        2
-   AHA-2940UW     aic7880   PCI/32       SE-HD68F
-                                         SE-50M         SE-HD68F
-   AHA-2940U      aic7880   PCI/32       SE-50M         SE-HD50F
-   AHA-2940D      aic7880   PCI/32
-   aHA-2940 A/T   aic7880   PCI/32
-   AHA-2940D A/T  aic7880   PCI/32
-   AHA-3940UW     aic7880   PCI/32     2 X SE-HD68F     SE-HD68F          3
-   AHA-3940UWD    aic7880   PCI/32     2 X SE-HD68F   2 X SE-VHD68F       3
-   AHA-3940U      aic7880   PCI/32     2 X SE-50M       SE-HD50F          3
-   AHA-2944UW     aic7880   PCI/32      HVD-HD68F       HVD-HD68F
-                                         HVD-50M
-   AHA-3944UWD    aic7880   PCI/32     2 X HVD-HD68F  2 X HVD-VHD68F      3
-   AHA-4944UW     aic7880   PCI/32
-   AHA-2930UW     aic7880   PCI/32
-   AHA-2940UW Pro aic7880   PCI/32      SE-HD68F        SE-HD68F            4
-                                         SE-50M
-   AHA-2940UW/CN  aic7880   PCI/32
-   AHA-2940UDual  aic7895   PCI/32
-   AHA-2940UWDual aic7895   PCI/32
-   AHA-3940UWD    aic7895   PCI/32
-   AHA-3940AUW    aic7895   PCI/32
-   AHA-3940AUWD   aic7895   PCI/32
-   AHA-3940AU     aic7895   PCI/32
-   AHA-3944AUWD   aic7895   PCI/32     2 X HVD-HD68F  2 X HVD-VHD68F
-   AHA-2940U2B    aic7890   PCI/32      LVD-HD68F       LVD-HD68F
-   AHA-2940U2 OEM aic7891   PCI/64
-   AHA-2940U2W    aic7890   PCI/32      LVD-HD68F       LVD-HD68F
-                                        SE-HD68F 
-                                         SE-50M
-   AHA-2950U2B    aic7891   PCI/64      LVD-HD68F       LVD-HD68F
-   AHA-2930U2     aic7890   PCI/32      LVD-HD68F       SE-HD50F
-                                         SE-50M 
-   AHA-3950U2B    aic7897   PCI/64
-   AHA-3950U2D    aic7897   PCI/64
-   AHA-29160      aic7892   PCI/64-66
-   AHA-29160 CPQ  aic7892   PCI/64-66
-   AHA-29160N     aic7892   PCI/32      LVD-HD68F       SE-HD50F
-                                         SE-50M
-   AHA-29160LP    aic7892   PCI/64-66
-   AHA-19160      aic7892   PCI/64-66
-   AHA-29150LP    aic7892   PCI/64-66
-   AHA-29130LP    aic7892   PCI/64-66
-   AHA-3960D      aic7899   PCI/64-66  2 X LVD-HD68F  2 X LVD-VHD68F
-                                         LVD-50M
-   AHA-3960D CPQ  aic7899   PCI/64-66  2 X LVD-HD68F  2 X LVD-VHD68F
-                                         LVD-50M
-   AHA-39160      aic7899   PCI/64-66  2 X LVD-HD68F  2 X LVD-VHD68F
-                                         LVD-50M
-
-   1. No BIOS support
-   2. DEC21050 PCI-PCI bridge with multiple controller chips on secondary bus
-   3. DEC2115X PCI-PCI bridge with multiple controller chips on secondary bus
-   4. All three SCSI connectors may be used simultaneously without
-      SCSI "stub" effects.
-
-2. Version History
-   7.0	  (4th August, 2005)
-	- Updated driver to use SCSI transport class infrastructure
-	- Upported sequencer and core fixes from last adaptec released
-	  version of the driver.
-   6.2.36 (June 3rd, 2003)
-        - Correct code that disables PCI parity error checking.
-        - Correct and simplify handling of the ignore wide residue
-          message.  The previous code would fail to report a residual
-          if the transaction data length was even and we received
-          an IWR message.
-        - Add support for the 2.5.X EISA framework.
-        - Update for change in 2.5.X SCSI proc FS interface.
-        - Correct Domain Validation command-line option parsing.
-        - When negotiation async via an 8bit WDTR message, send
-          an SDTR with an offset of 0 to be sure the target
-          knows we are async.  This works around a firmware defect
-          in the Quantum Atlas 10K.
-        - Clear PCI error state during driver attach so that we
-          don't disable memory mapped I/O due to a stray write
-          by some other driver probe that occurred before we
-          claimed the controller.
-
-   6.2.35 (May 14th, 2003)
-        - Fix a few GCC 3.3 compiler warnings.
-        - Correct operation on EISA Twin Channel controller.
-        - Add support for 2.5.X's scsi_report_device_reset().
-
-   6.2.34 (May 5th, 2003)
-        - Fix locking regression introduced in 6.2.29 that
-          could cause a lock order reversal between the io_request_lock
-          and our per-softc lock.  This was only possible on RH9,
-          SuSE, and kernel.org 2.4.X kernels.
-
-   6.2.33 (April 30th, 2003)
-        - Dynamically disable PCI parity error reporting after
-          10 errors are reported to the user.  These errors are
-          the result of some other device issuing PCI transactions
-          with bad parity.  Once the user has been informed of the
-          problem, continuing to report the errors just degrades
-          our performance.
-
-   6.2.32 (March 28th, 2003)
-        - Dynamically sized S/G lists to avoid SCSI malloc
-          pool fragmentation and SCSI mid-layer deadlock.
-
-   6.2.28 (January 20th, 2003)
-        - Domain Validation Fixes
-        - Add ability to disable PCI parity error checking.
-        - Enhanced Memory Mapped I/O probe
-
-   6.2.20 (November 7th, 2002)
-        - Added Domain Validation.
-
-3. Command Line Options
-
-        WARNING: ALTERING OR ADDING THESE DRIVER PARAMETERS
-                 INCORRECTLY CAN RENDER YOUR SYSTEM INOPERABLE.
-                 USE THEM WITH CAUTION. 
-
-   Put a .conf file in the /etc/modprobe.d directory and add/edit a
-   line containing 'options aic7xxx aic7xxx=[command[,command...]]' where
-   'command' is one or more of the following:
-   -----------------------------------------------------------------
-              Option: verbose
-          Definition: enable additional informative messages during
-                      driver operation.
-     Possible Values: This option is a flag
-       Default Value: disabled
-   -----------------------------------------------------------------
-              Option: debug:[value]
-          Definition: Enables various levels of debugging information
-     Possible Values: 0x0000 = no debugging, 0xffff = full debugging
-       Default Value: 0x0000
-   -----------------------------------------------------------------
-              Option: no_probe
-              Option: probe_eisa_vl
-          Definition: Do not probe for EISA/VLB controllers.
-                      This is a toggle.  If the driver is compiled
-                      to not probe EISA/VLB controllers by default,
-                      specifying "no_probe" will enable this probing.
-                      If the driver is compiled to probe EISA/VLB
-                      controllers by default, specifying "no_probe"
-                      will disable this probing.
-     Possible Values: This option is a toggle
-       Default Value: EISA/VLB probing is disabled by default.
-   -----------------------------------------------------------------
-              Option: pci_parity
-          Definition: Toggles the detection of PCI parity errors.
-                      On many motherboards with VIA chipsets,
-                      PCI parity is not generated correctly on the
-                      PCI bus.  It is impossible for the hardware to
-                      differentiate between these "spurious" parity
-                      errors and real parity errors.  The symptom of
-                      this problem is a stream of the message:
-    "scsi0: Data Parity Error Detected during address or write data phase"
-                      output by the driver.
-     Possible Values: This option is a toggle
-       Default Value: PCI Parity Error reporting is disabled
-   -----------------------------------------------------------------
-              Option: no_reset
-          Definition: Do not reset the bus during the initial probe
-                      phase
-     Possible Values: This option is a flag
-       Default Value: disabled
-   -----------------------------------------------------------------
-              Option: extended
-          Definition: Force extended translation on the controller
-     Possible Values: This option is a flag
-       Default Value: disabled
-   -----------------------------------------------------------------
-              Option: periodic_otag
-          Definition: Send an ordered tag periodically to prevent
-                      tag starvation.  Needed for some older devices
-     Possible Values: This option is a flag
-       Default Value: disabled
-   -----------------------------------------------------------------
-              Option: reverse_scan
-          Definition: Probe the scsi bus in reverse order, starting
-                      with target 15
-     Possible Values: This option is a flag
-       Default Value: disabled
-   -----------------------------------------------------------------
-              Option: global_tag_depth:[value]
-          Definition: Global tag depth for all targets on all busses.
-                      This option sets the default tag depth which
-                      may be selectively overridden vi the tag_info
-                      option.
-     Possible Values: 1 - 253
-       Default Value: 32
-   -----------------------------------------------------------------
-              Option: tag_info:{{value[,value...]}[,{value[,value...]}...]}
-          Definition: Set the per-target tagged queue depth on a
-                      per controller basis.  Both controllers and targets
-                      may be omitted indicating that they should retain
-                      the default tag depth.
-            Examples: tag_info:{{16,32,32,64,8,8,,32,32,32,32,32,32,32,32,32}
-                        On Controller 0
-                          specifies a tag depth of 16 for target 0
-                          specifies a tag depth of 64 for target 3
-                          specifies a tag depth of 8 for targets 4 and 5
-                          leaves target 6 at the default
-                          specifies a tag depth of 32 for targets 1,2,7-15
-                        All other targets retain the default depth.
-
-                      tag_info:{{},{32,,32}}
-                        On Controller 1
-                          specifies a tag depth of 32 for targets 0 and 2
-                        All other targets retain the default depth.
-                        
-     Possible Values: 1 - 253
-       Default Value: 32
-   -----------------------------------------------------------------
-              Option: seltime:[value]
-          Definition: Specifies the selection timeout value
-     Possible Values: 0 = 256ms, 1 = 128ms, 2 = 64ms, 3 = 32ms
-       Default Value: 0
-   -----------------------------------------------------------------
-              Option: dv: {value[,value...]} 
-          Definition: Set Domain Validation Policy on a per-controller basis.
-                      Controllers may be omitted indicating that
-                      they should retain the default read streaming setting.
-             Example: dv:{-1,0,,1,1,0}
-                        On Controller 0 leave DV at its default setting.
-                        On Controller 1 disable DV.
-                        Skip configuration on Controller 2.
-                        On Controllers 3 and 4 enable DV.
-                        On Controller 5 disable DV.
-
-     Possible Values: < 0 Use setting from serial EEPROM.
-                      0 Disable DV
-                      > 0 Enable DV
-
-       Default Value: SCSI-Select setting on controllers with a SCSI Select
-                      option for DV.  Otherwise, on for controllers supporting
-                      U160 speeds and off for all other controller types.
-   -----------------------------------------------------------------
-
-   Example:
-   'options aic7xxx aic7xxx=verbose,no_probe,tag_info:{{},{,,10}},seltime:1'
-        enables verbose logging, Disable EISA/VLB probing,
-        and set tag depth on Controller 1/Target 2 to 10 tags.
-
-4. Adaptec Customer Support
-
-   A Technical Support Identification (TSID) Number is required for 
-   Adaptec technical support.
-    - The 12-digit TSID can be found on the white barcode-type label
-      included inside the box with your product.  The TSID helps us 
-      provide more efficient service by accurately identifying your 
-      product and support status.
-
-   Support Options
-    - Search the Adaptec Support Knowledgebase (ASK) at
-      http://ask.adaptec.com for articles, troubleshooting tips, and
-      frequently asked questions about your product.
-    - For support via Email, submit your question to Adaptec's 
-      Technical Support Specialists at http://ask.adaptec.com/.
-     
-   North America
-    - Visit our Web site at http://www.adaptec.com/.
-    - For information about Adaptec's support options, call
-      408-957-2550, 24 hours a day, 7 days a week.
-    - To speak with a Technical Support Specialist,
-      * For hardware products, call 408-934-7274,
-        Monday to Friday, 3:00 am to 5:00 pm, PDT.
-      * For RAID and Fibre Channel products, call 321-207-2000,
-        Monday to Friday, 3:00 am to 5:00 pm, PDT.
-      To expedite your service, have your computer with you.
-    - To order Adaptec products, including accessories and cables,
-      call 408-957-7274.  To order cables online go to
-      http://www.adaptec.com/buy-cables/.
-
-   Europe
-    - Visit our Web site at http://www.adaptec.com/en-US/_common/world_index.
-    - To speak with a Technical Support Specialist, call, or email,
-      * German:  +49 89 4366 5522, Monday-Friday, 9:00-17:00 CET,
-        http://ask-de.adaptec.com/.
-      * French:  +49 89 4366 5533, Monday-Friday, 9:00-17:00 CET,
-	http://ask-fr.adaptec.com/.
-      * English: +49 89 4366 5544, Monday-Friday, 9:00-17:00 GMT,
-	http://ask.adaptec.com/.
-    - You can order Adaptec cables online at
-      http://www.adaptec.com/buy-cables/.
-
-   Japan
-    - Visit our web site at http://www.adaptec.co.jp/.
-    - To speak with a Technical Support Specialist, call 
-      +81 3 5308 6120, Monday-Friday, 9:00 a.m. to 12:00 p.m.,
-      1:00 p.m. to 6:00 p.m.
-
--------------------------------------------------------------------
-/*
- * Copyright (c) 2003 Adaptec Inc. 691 S. Milpitas Blvd., Milpitas CA 95035 USA.
- * All rights reserved.
- *
- * You are permitted to redistribute, use and modify this README file in whole
- * or in part in conjunction with redistribution of software governed by the
- * General Public License, provided that the following conditions are met:
- * 1. Redistributions of README file must retain the above copyright
- *    notice, this list of conditions, and the following disclaimer,
- *    without modification.
- * 2. The name of the author may not be used to endorse or promote products
- *    derived from this software without specific prior written permission.
- * 3. Modifications or new contributions must be attributed in a copyright
- *    notice identifying the author ("Contributor") and added below the
- *    original copyright notice. The copyright notice is for purposes of
- *    identifying contributors and should not be deemed as permission to alter
- *    the permissions given by Adaptec.
- *
- * THIS README FILE IS PROVIDED BY ADAPTEC AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ANY
- * WARRANTIES OF NON-INFRINGEMENT OR THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
- * ADAPTEC OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
- * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS README
- * FILE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
diff --git a/Documentation/scsi/arcmsr_spec.rst b/Documentation/scsi/arcmsr_spec.rst
new file mode 100644
index 0000000..83dd53b
--- /dev/null
+++ b/Documentation/scsi/arcmsr_spec.rst
@@ -0,0 +1,907 @@
+ARECA FIRMWARE SPEC
+===================
+
+Usage of IOP331 adapter
+=======================
+
+(All In/Out is in IOP331's view)
+
+1. Message 0
+------------
+
+- InitThread message and return code
+
+2. Doorbell is used for RS-232 emulation
+----------------------------------------
+
+inDoorBell
+    bit0
+	data in ready
+	zDRIVER DATA WRITE OK)
+    bit1
+	data out has been read
+	(DRIVER DATA READ OK)
+
+outDooeBell:
+    bit0
+	data out ready
+	(IOP331 DATA WRITE OK)
+    bit1
+	data in has been read
+	(IOP331 DATA READ OK)
+
+3. Index Memory Usage
+---------------------
+
+============   ==========================================
+offset 0xf00   for RS232 out (request buffer)
+offset 0xe00   for RS232 in  (scratch buffer)
+offset 0xa00   for inbound message code message_rwbuffer
+	       (driver send to IOP331)
+offset 0xa00   for outbound message code message_rwbuffer
+	       (IOP331 send to driver)
+============   ==========================================
+
+4. RS-232 emulation
+-------------------
+
+Currently 128 byte buffer is used:
+
+============   =====================
+1st uint32_t   Data length (1--124)
+Byte 4--127    Max 124 bytes of data
+============   =====================
+
+5. PostQ
+--------
+
+All SCSI Command must be sent through postQ:
+
+    (inbound queue port)
+	Request frame must be 32 bytes aligned:
+
+	    #bit27--bit31
+		flag for post ccb
+	    #bit0--bit26
+		real address (bit27--bit31) of post arcmsr_cdb
+
+		=====   ===================
+		bit31   ==  ===============
+			0   256 bytes frame
+			1   512 bytes frame
+			==  ===============
+		bit30   ==  ==============
+			0   normal request
+			1   BIOS request
+			==  ==============
+		bit29   reserved
+		bit28   reserved
+		bit27   reserved
+		=====   ===================
+
+    (outbount queue port)
+	Request reply:
+
+	    #bit27--bit31
+		    flag for reply
+	    #bit0--bit26
+		    real address (bit27--bit31) of reply arcmsr_cdb
+
+		    =====   =======================================================
+		    bit31   must be 0 (for this type of reply)
+		    bit30   reserved for BIOS handshake
+		    bit29   reserved
+		    bit28   ==  ===================================================
+			    0   no error, ignore AdapStatus/DevStatus/SenseData
+			    1   Error, error code in AdapStatus/DevStatus/SenseData
+			    ==  ===================================================
+		    bit27   reserved
+		    =====   =======================================================
+
+6. BIOS request
+---------------
+
+All BIOS request is the same with request from PostQ
+
+Except:
+
+Request frame is sent from configuration space:
+
+	============   ==========================
+	offset: 0x78   Request Frame (bit30 == 1)
+	offset: 0x18   writeonly to generate
+		       IRQ to IOP331
+	============   ==========================
+
+Completion of request::
+
+	(bit30 == 0, bit28==err flag)
+
+7. Definition of SGL entry (structure)
+--------------------------------------
+
+8. Message1 Out - Diag Status Code (????)
+-----------------------------------------
+
+9. Message0 message code
+------------------------
+
+======  =================================================================
+0x00    NOP
+0x01    Get Config
+	->offset 0xa00 :for outbound message code message_rwbuffer
+	(IOP331 send to driver)
+
+	===================== ==========================================
+	Signature             0x87974060(4)
+	Request len           0x00000200(4)
+	numbers of queue      0x00000100(4)
+	SDRAM Size            0x00000100(4)-->256 MB
+	IDE Channels          0x00000008(4)
+	vendor                40 bytes char
+	model                 8 bytes char
+	FirmVer               16 bytes char
+	Device Map            16 bytes char
+	FirmwareVersion       DWORD
+
+			      - Added for checking of
+				new firmware capability
+	===================== ==========================================
+0x02    Set Config
+	->offset 0xa00 :for inbound message code message_rwbuffer
+	(driver send to IOP331)
+
+	========================= ==================
+	Signature                 0x87974063(4)
+	UPPER32 of Request Frame  (4)-->Driver Only
+	========================= ==================
+0x03    Reset (Abort all queued Command)
+0x04    Stop Background Activity
+0x05    Flush Cache
+0x06    Start Background Activity
+	(re-start if background is halted)
+0x07    Check If Host Command Pending
+	(Novell May Need This Function)
+0x08    Set controller time
+	->offset 0xa00   for inbound message code message_rwbuffer
+	(driver to IOP331)
+
+	======   ==================
+	byte 0   0xaa <-- signature
+	byte 1   0x55 <-- signature
+	byte 2   year (04)
+	byte 3   month (1..12)
+	byte 4   date (1..31)
+	byte 5   hour (0..23)
+	byte 6   minute (0..59)
+	byte 7   second (0..59)
+	======   ==================
+======  =================================================================
+
+
+RS-232 Interface for Areca Raid Controller
+==========================================
+
+      The low level command interface is exclusive with VT100 terminal
+
+1. Sequence of command execution
+--------------------------------
+
+	(A) Header
+		3 bytes sequence (0x5E, 0x01, 0x61)
+
+	(B) Command block
+		variable length of data including length,
+		command code, data and checksum byte
+
+	(C) Return data
+		variable length of data
+
+2. Command block
+----------------
+
+	(A) 1st byte
+		command block length (low byte)
+
+	(B) 2nd byte
+		command block length (high byte)
+
+		.. Note:: command block length shouldn't > 2040 bytes,
+			  length excludes these two bytes
+
+	(C) 3rd byte
+		command code
+
+	(D) 4th and following bytes
+		variable length data bytes
+
+	    depends on command code
+
+	(E) last byte
+	    checksum byte (sum of 1st byte until last data byte)
+
+3. Command code and associated data
+-----------------------------------
+
+The following are command code defined in raid controller Command
+code 0x10--0x1? are used for system level management,
+no password checking is needed and should be implemented in separate
+well controlled utility and not for end user access.
+Command code 0x20--0x?? always check the password,
+password must be entered to enable these command::
+
+	enum
+	{
+		GUI_SET_SERIAL=0x10,
+		GUI_SET_VENDOR,
+		GUI_SET_MODEL,
+		GUI_IDENTIFY,
+		GUI_CHECK_PASSWORD,
+		GUI_LOGOUT,
+		GUI_HTTP,
+		GUI_SET_ETHERNET_ADDR,
+		GUI_SET_LOGO,
+		GUI_POLL_EVENT,
+		GUI_GET_EVENT,
+		GUI_GET_HW_MONITOR,
+		//    GUI_QUICK_CREATE=0x20, (function removed)
+		GUI_GET_INFO_R=0x20,
+		GUI_GET_INFO_V,
+		GUI_GET_INFO_P,
+		GUI_GET_INFO_S,
+		GUI_CLEAR_EVENT,
+		GUI_MUTE_BEEPER=0x30,
+		GUI_BEEPER_SETTING,
+		GUI_SET_PASSWORD,
+		GUI_HOST_INTERFACE_MODE,
+		GUI_REBUILD_PRIORITY,
+		GUI_MAX_ATA_MODE,
+		GUI_RESET_CONTROLLER,
+		GUI_COM_PORT_SETTING,
+		GUI_NO_OPERATION,
+		GUI_DHCP_IP,
+		GUI_CREATE_PASS_THROUGH=0x40,
+		GUI_MODIFY_PASS_THROUGH,
+		GUI_DELETE_PASS_THROUGH,
+		GUI_IDENTIFY_DEVICE,
+		GUI_CREATE_RAIDSET=0x50,
+		GUI_DELETE_RAIDSET,
+		GUI_EXPAND_RAIDSET,
+		GUI_ACTIVATE_RAIDSET,
+		GUI_CREATE_HOT_SPARE,
+		GUI_DELETE_HOT_SPARE,
+		GUI_CREATE_VOLUME=0x60,
+		GUI_MODIFY_VOLUME,
+		GUI_DELETE_VOLUME,
+		GUI_START_CHECK_VOLUME,
+		GUI_STOP_CHECK_VOLUME
+	};
+
+Command description
+^^^^^^^^^^^^^^^^^^^
+
+GUI_SET_SERIAL
+	Set the controller serial#
+
+	================  =============================================
+	byte 0,1          length
+	byte 2            command code 0x10
+	byte 3            password length (should be 0x0f)
+	byte 4-0x13       should be "ArEcATecHnoLogY"
+	byte 0x14--0x23   Serial number string (must be 16 bytes)
+	================  =============================================
+
+GUI_SET_VENDOR
+	Set vendor string for the controller
+
+	================  =============================================
+	byte 0,1          length
+	byte 2            command code 0x11
+	byte 3            password length (should be 0x08)
+	byte 4-0x13       should be "ArEcAvAr"
+	byte 0x14--0x3B   vendor string (must be 40 bytes)
+	================  =============================================
+
+GUI_SET_MODEL
+	Set the model name of the controller
+
+	================  =============================================
+	byte 0,1          length
+	byte 2            command code 0x12
+	byte 3            password length (should be 0x08)
+	byte 4-0x13       should be "ArEcAvAr"
+	byte 0x14--0x1B   model string (must be 8 bytes)
+	================  =============================================
+
+GUI_IDENTIFY
+	Identify device
+
+	================  =============================================
+	byte 0,1          length
+	byte 2            command code 0x13
+			    return "Areca RAID Subsystem "
+	================  =============================================
+
+GUI_CHECK_PASSWORD
+	Verify password
+
+	================  =============================================
+	byte 0,1          length
+	byte 2            command code 0x14
+	byte 3            password length
+	byte 4-0x??       user password to be checked
+	================  =============================================
+
+GUI_LOGOUT
+	Logout GUI (force password checking on next command)
+
+	================  =============================================
+	byte 0,1          length
+	byte 2            command code 0x15
+	================  =============================================
+
+GUI_HTTP
+	HTTP interface (reserved for Http proxy service)(0x16)
+
+GUI_SET_ETHERNET_ADDR
+	Set the ethernet MAC address
+
+	================  =============================================
+	byte 0,1          length
+	byte 2            command code 0x17
+	byte 3            password length (should be 0x08)
+	byte 4-0x13       should be "ArEcAvAr"
+	byte 0x14--0x19   Ethernet MAC address (must be 6 bytes)
+	================  =============================================
+
+GUI_SET_LOGO
+	Set logo in HTTP
+
+	================  =============================================
+	byte 0,1          length
+	byte 2            command code 0x18
+	byte 3            Page# (0/1/2/3) (0xff --> clear OEM logo)
+	byte 4/5/6/7      0x55/0xaa/0xa5/0x5a
+	byte 8            TITLE.JPG data (each page must be 2000 bytes)
+
+			  .. Note:: page0 1st 2 byte must be
+				    actual length of the JPG file
+	================  =============================================
+
+GUI_POLL_EVENT
+	Poll If Event Log Changed
+
+	================  =============================================
+	byte 0,1          length
+	byte 2            command code 0x19
+	================  =============================================
+
+GUI_GET_EVENT
+	Read Event
+
+	================  =============================================
+	byte 0,1          length
+	byte 2            command code 0x1a
+	byte 3            Event Page (0:1st page/1/2/3:last page)
+	================  =============================================
+
+GUI_GET_HW_MONITOR
+	Get HW monitor data
+
+	================  =============================================
+	byte 0,1          length
+	byte 2 		  command code 0x1b
+	byte 3 		  # of FANs(example 2)
+	byte 4 		  # of Voltage sensor(example 3)
+	byte 5 		  # of temperature sensor(example 2)
+	byte 6 		  # of power
+	byte 7/8          Fan#0 (RPM)
+	byte 9/10         Fan#1
+	byte 11/12 	  Voltage#0 original value in ``*1000``
+	byte 13/14 	  Voltage#0 value
+	byte 15/16 	  Voltage#1 org
+	byte 17/18 	  Voltage#1
+	byte 19/20 	  Voltage#2 org
+	byte 21/22 	  Voltage#2
+	byte 23 	  Temp#0
+	byte 24 	  Temp#1
+	byte 25 	  Power indicator (bit0   power#0,
+			  bit1   power#1)
+	byte 26 	  UPS indicator
+	================  =============================================
+
+GUI_QUICK_CREATE
+	Quick create raid/volume set
+
+	================  ==============================================
+	byte 0,1       	  length
+	byte 2         	  command code 0x20
+	byte 3/4/5/6   	  raw capacity
+	byte 7 		  raid level
+	byte 8 		  stripe size
+	byte 9 		  spare
+	byte 10/11/12/13  device mask (the devices to create raid/volume)
+	================  ==============================================
+
+    This function is removed, application like
+    to implement quick create function
+
+    need to use GUI_CREATE_RAIDSET and GUI_CREATE_VOLUMESET function.
+
+GUI_GET_INFO_R
+	Get Raid Set Information
+
+	================  =============================================
+	byte 0,1          length
+	byte 2            command code 0x20
+	byte 3            raidset#
+	================  =============================================
+
+	::
+
+	    typedef struct sGUI_RAIDSET
+	    {
+		    BYTE grsRaidSetName[16];
+		    DWORD grsCapacity;
+		    DWORD grsCapacityX;
+		    DWORD grsFailMask;
+		    BYTE grsDevArray[32];
+		    BYTE grsMemberDevices;
+		    BYTE grsNewMemberDevices;
+		    BYTE grsRaidState;
+		    BYTE grsVolumes;
+		    BYTE grsVolumeList[16];
+		    BYTE grsRes1;
+		    BYTE grsRes2;
+		    BYTE grsRes3;
+		    BYTE grsFreeSegments;
+		    DWORD grsRawStripes[8];
+		    DWORD grsRes4;
+		    DWORD grsRes5; //     Total to 128 bytes
+		    DWORD grsRes6; //     Total to 128 bytes
+	    } sGUI_RAIDSET, *pGUI_RAIDSET;
+
+GUI_GET_INFO_V
+	Get Volume Set Information
+
+	================  =============================================
+	byte 0,1          length
+	byte 2            command code 0x21
+	byte 3            volumeset#
+	================  =============================================
+
+	::
+
+	    typedef struct sGUI_VOLUMESET
+	    {
+		    BYTE gvsVolumeName[16]; //     16
+		    DWORD gvsCapacity;
+		    DWORD gvsCapacityX;
+		    DWORD gvsFailMask;
+		    DWORD gvsStripeSize;
+		    DWORD gvsNewFailMask;
+		    DWORD gvsNewStripeSize;
+		    DWORD gvsVolumeStatus;
+		    DWORD gvsProgress; //     32
+		    sSCSI_ATTR gvsScsi;
+		    BYTE gvsMemberDisks;
+		    BYTE gvsRaidLevel; //     8
+		    BYTE gvsNewMemberDisks;
+		    BYTE gvsNewRaidLevel;
+		    BYTE gvsRaidSetNumber;
+		    BYTE gvsRes0; //     4
+		    BYTE gvsRes1[4]; //     64 bytes
+	    } sGUI_VOLUMESET, *pGUI_VOLUMESET;
+
+GUI_GET_INFO_P
+	Get Physical Drive Information
+
+	================  =============================================
+	byte 0,1          length
+	byte 2            command code 0x22
+	byte 3            drive # (from 0 to max-channels - 1)
+	================  =============================================
+
+	::
+
+	    typedef struct sGUI_PHY_DRV
+	    {
+		    BYTE gpdModelName[40];
+		    BYTE gpdSerialNumber[20];
+		    BYTE gpdFirmRev[8];
+		    DWORD gpdCapacity;
+		    DWORD gpdCapacityX; //     Reserved for expansion
+		    BYTE gpdDeviceState;
+		    BYTE gpdPioMode;
+		    BYTE gpdCurrentUdmaMode;
+		    BYTE gpdUdmaMode;
+		    BYTE gpdDriveSelect;
+		    BYTE gpdRaidNumber; //     0xff if not belongs to a raid set
+		    sSCSI_ATTR gpdScsi;
+		    BYTE gpdReserved[40]; //     Total to 128 bytes
+	    } sGUI_PHY_DRV, *pGUI_PHY_DRV;
+
+GUI_GET_INFO_S
+	Get System Information
+
+	================  =============================================
+	byte 0,1          length
+	byte 2            command code 0x23
+	================  =============================================
+
+	::
+
+	    typedef struct sCOM_ATTR
+	    {
+		    BYTE comBaudRate;
+		    BYTE comDataBits;
+		    BYTE comStopBits;
+		    BYTE comParity;
+		    BYTE comFlowControl;
+	    } sCOM_ATTR, *pCOM_ATTR;
+	    typedef struct sSYSTEM_INFO
+	    {
+		    BYTE gsiVendorName[40];
+		    BYTE gsiSerialNumber[16];
+		    BYTE gsiFirmVersion[16];
+		    BYTE gsiBootVersion[16];
+		    BYTE gsiMbVersion[16];
+		    BYTE gsiModelName[8];
+		    BYTE gsiLocalIp[4];
+		    BYTE gsiCurrentIp[4];
+		    DWORD gsiTimeTick;
+		    DWORD gsiCpuSpeed;
+		    DWORD gsiICache;
+		    DWORD gsiDCache;
+		    DWORD gsiScache;
+		    DWORD gsiMemorySize;
+		    DWORD gsiMemorySpeed;
+		    DWORD gsiEvents;
+		    BYTE gsiMacAddress[6];
+		    BYTE gsiDhcp;
+		    BYTE gsiBeeper;
+		    BYTE gsiChannelUsage;
+		    BYTE gsiMaxAtaMode;
+		    BYTE gsiSdramEcc; //     1:if ECC enabled
+		    BYTE gsiRebuildPriority;
+		    sCOM_ATTR gsiComA; //     5 bytes
+		    sCOM_ATTR gsiComB; //     5 bytes
+		    BYTE gsiIdeChannels;
+		    BYTE gsiScsiHostChannels;
+		    BYTE gsiIdeHostChannels;
+		    BYTE gsiMaxVolumeSet;
+		    BYTE gsiMaxRaidSet;
+		    BYTE gsiEtherPort; //     1:if ether net port supported
+		    BYTE gsiRaid6Engine; //     1:Raid6 engine supported
+		    BYTE gsiRes[75];
+	    } sSYSTEM_INFO, *pSYSTEM_INFO;
+
+GUI_CLEAR_EVENT
+	Clear System Event
+
+	================  =============================================
+	byte 0,1          length
+	byte 2            command code 0x24
+	================  =============================================
+
+GUI_MUTE_BEEPER
+	Mute current beeper
+
+	================  =============================================
+	byte 0,1          length
+	byte 2            command code 0x30
+	================  =============================================
+GUI_BEEPER_SETTING
+	Disable beeper
+
+	================  =============================================
+	byte 0,1          length
+	byte 2            command code 0x31
+	byte 3            0->disable, 1->enable
+	================  =============================================
+
+GUI_SET_PASSWORD
+	Change password
+
+	================  =============================================
+	byte 0,1          length
+	byte 2 		  command code 0x32
+	byte 3 		  pass word length ( must <= 15 )
+	byte 4 		  password (must be alpha-numerical)
+	================  =============================================
+
+GUI_HOST_INTERFACE_MODE
+	Set host interface mode
+
+	================  =============================================
+	byte 0,1          length
+	byte 2 		  command code 0x33
+	byte 3 		  0->Independent, 1->cluster
+	================  =============================================
+
+GUI_REBUILD_PRIORITY
+	Set rebuild priority
+
+	================  =============================================
+	byte 0,1          length
+	byte 2 		  command code 0x34
+	byte 3 		  0/1/2/3 (low->high)
+	================  =============================================
+
+GUI_MAX_ATA_MODE
+	Set maximum ATA mode to be used
+
+	================  =============================================
+	byte 0,1          length
+	byte 2 		  command code 0x35
+	byte 3 		  0/1/2/3 (133/100/66/33)
+	================  =============================================
+
+GUI_RESET_CONTROLLER
+	Reset Controller
+
+	================  =============================================
+	byte 0,1          length
+	byte 2            command code 0x36
+			  * Response with VT100 screen (discard it)
+	================  =============================================
+
+GUI_COM_PORT_SETTING
+	COM port setting
+
+	================  =================================================
+	byte 0,1	  length
+	byte 2 		  command code 0x37
+	byte 3 		  0->COMA (term port),
+			  1->COMB (debug port)
+	byte 4 		  0/1/2/3/4/5/6/7
+			  (1200/2400/4800/9600/19200/38400/57600/115200)
+	byte 5 		  data bit
+			  (0:7 bit, 1:8 bit   must be 8 bit)
+	byte 6 		  stop bit (0:1, 1:2 stop bits)
+	byte 7 		  parity (0:none, 1:off, 2:even)
+	byte 8 		  flow control
+			  (0:none, 1:xon/xoff, 2:hardware => must use none)
+	================  =================================================
+
+GUI_NO_OPERATION
+	No operation
+
+	================  =============================================
+	byte 0,1          length
+	byte 2            command code 0x38
+	================  =============================================
+
+GUI_DHCP_IP
+	Set DHCP option and local IP address
+
+	================  =============================================
+	byte 0,1          length
+	byte 2            command code 0x39
+	byte 3            0:dhcp disabled, 1:dhcp enabled
+	byte 4/5/6/7      IP address
+	================  =============================================
+
+GUI_CREATE_PASS_THROUGH
+	Create pass through disk
+
+	================  =============================================
+	byte 0,1          length
+	byte 2 		  command code 0x40
+	byte 3 		  device #
+	byte 4 		  scsi channel (0/1)
+	byte 5 		  scsi id (0-->15)
+	byte 6 		  scsi lun (0-->7)
+	byte 7 		  tagged queue (1   enabled)
+	byte 8 		  cache mode (1   enabled)
+	byte 9 		  max speed (0/1/2/3/4,
+			  async/20/40/80/160 for scsi)
+			  (0/1/2/3/4, 33/66/100/133/150 for ide  )
+	================  =============================================
+
+GUI_MODIFY_PASS_THROUGH
+	Modify pass through disk
+
+	================  =============================================
+	byte 0,1          length
+	byte 2 		  command code 0x41
+	byte 3 		  device #
+	byte 4 		  scsi channel (0/1)
+	byte 5 		  scsi id (0-->15)
+	byte 6 		  scsi lun (0-->7)
+	byte 7 		  tagged queue (1   enabled)
+	byte 8 		  cache mode (1   enabled)
+	byte 9 		  max speed (0/1/2/3/4,
+			  async/20/40/80/160 for scsi)
+			  (0/1/2/3/4, 33/66/100/133/150 for ide  )
+	================  =============================================
+
+GUI_DELETE_PASS_THROUGH
+	Delete pass through disk
+
+	================  =============================================
+	byte 0,1          length
+	byte 2            command code 0x42
+	byte 3            device# to be deleted
+	================  =============================================
+GUI_IDENTIFY_DEVICE
+	Identify Device
+
+	================  =============================================
+	byte 0,1          length
+	byte 2            command code 0x43
+	byte 3            Flash Method
+			  (0:flash selected, 1:flash not selected)
+	byte 4/5/6/7      IDE device mask to be flashed
+			  .. Note:: no response data available
+	================  =============================================
+
+GUI_CREATE_RAIDSET
+	Create Raid Set
+
+	================  =============================================
+	byte 0,1          length
+	byte 2            command code 0x50
+	byte 3/4/5/6      device mask
+	byte 7-22         raidset name (if byte 7 == 0:use default)
+	================  =============================================
+
+GUI_DELETE_RAIDSET
+	Delete Raid Set
+
+	================  =============================================
+	byte 0,1          length
+	byte 2            command code 0x51
+	byte 3            raidset#
+	================  =============================================
+
+GUI_EXPAND_RAIDSET
+	Expand Raid Set
+
+	================  =============================================
+	byte 0,1          length
+	byte 2            command code 0x52
+	byte 3            raidset#
+	byte 4/5/6/7      device mask for expansion
+	byte 8/9/10       (8:0 no change, 1 change, 0xff:terminate,
+			  9:new raid level,
+			  10:new stripe size
+			  0/1/2/3/4/5->4/8/16/32/64/128K )
+	byte 11/12/13     repeat for each volume in the raidset
+	================  =============================================
+
+GUI_ACTIVATE_RAIDSET
+	Activate incomplete raid set
+
+	================  =============================================
+	byte 0,1          length
+	byte 2            command code 0x53
+	byte 3            raidset#
+	================  =============================================
+
+GUI_CREATE_HOT_SPARE
+	Create hot spare disk
+
+	================  =============================================
+	byte 0,1          length
+	byte 2            command code 0x54
+	byte 3/4/5/6      device mask for hot spare creation
+	================  =============================================
+
+GUI_DELETE_HOT_SPARE
+	Delete hot spare disk
+
+	================  =============================================
+	byte 0,1          length
+	byte 2            command code 0x55
+	byte 3/4/5/6      device mask for hot spare deletion
+	================  =============================================
+
+GUI_CREATE_VOLUME
+	Create volume set
+
+	================  =============================================
+	byte 0,1          length
+	byte 2            command code 0x60
+	byte 3            raidset#
+	byte 4-19         volume set name
+			  (if byte4 == 0, use default)
+	byte 20-27        volume capacity (blocks)
+	byte 28 	  raid level
+	byte 29 	  stripe size
+			  (0/1/2/3/4/5->4/8/16/32/64/128K)
+	byte 30 	  channel
+	byte 31 	  ID
+	byte 32 	  LUN
+	byte 33 	  1 enable tag
+	byte 34 	  1 enable cache
+	byte 35 	  speed
+			  (0/1/2/3/4->async/20/40/80/160 for scsi)
+			  (0/1/2/3/4->33/66/100/133/150 for IDE  )
+	byte 36 	  1 to select quick init
+	================  =============================================
+
+GUI_MODIFY_VOLUME
+	Modify volume Set
+
+	================  =============================================
+	byte 0,1          length
+	byte 2            command code 0x61
+	byte 3            volumeset#
+	byte 4-19         new volume set name
+			  (if byte4 == 0, not change)
+	byte 20-27        new volume capacity (reserved)
+	byte 28 	  new raid level
+	byte 29 	  new stripe size
+			  (0/1/2/3/4/5->4/8/16/32/64/128K)
+	byte 30 	  new channel
+	byte 31 	  new ID
+	byte 32 	  new LUN
+	byte 33 	  1 enable tag
+	byte 34 	  1 enable cache
+	byte 35 	  speed
+			  (0/1/2/3/4->async/20/40/80/160 for scsi)
+			  (0/1/2/3/4->33/66/100/133/150 for IDE  )
+	================  =============================================
+
+GUI_DELETE_VOLUME
+	Delete volume set
+
+	================  =============================================
+	byte 0,1          length
+	byte 2            command code 0x62
+	byte 3            volumeset#
+	================  =============================================
+
+GUI_START_CHECK_VOLUME
+	Start volume consistency check
+
+	================  =============================================
+	byte 0,1          length
+	byte 2            command code 0x63
+	byte 3            volumeset#
+	================  =============================================
+
+GUI_STOP_CHECK_VOLUME
+	Stop volume consistency check
+
+	================  =============================================
+	byte 0,1          length
+	byte 2            command code 0x64
+	================  =============================================
+
+4. Returned data
+----------------
+
+(A) Header
+    3 bytes sequence (0x5E, 0x01, 0x61)
+(B) Length
+    2 bytes
+    (low byte 1st, excludes length and checksum byte)
+(C)
+    status or data:
+
+	1) If length == 1 ==> 1 byte status code::
+
+		#define GUI_OK                    0x41
+		#define GUI_RAIDSET_NOT_NORMAL    0x42
+		#define GUI_VOLUMESET_NOT_NORMAL  0x43
+		#define GUI_NO_RAIDSET            0x44
+		#define GUI_NO_VOLUMESET          0x45
+		#define GUI_NO_PHYSICAL_DRIVE     0x46
+		#define GUI_PARAMETER_ERROR       0x47
+		#define GUI_UNSUPPORTED_COMMAND   0x48
+		#define GUI_DISK_CONFIG_CHANGED   0x49
+		#define GUI_INVALID_PASSWORD      0x4a
+		#define GUI_NO_DISK_SPACE         0x4b
+		#define GUI_CHECKSUM_ERROR        0x4c
+		#define GUI_PASSWORD_REQUIRED     0x4d
+
+	2) If length > 1:
+
+		data block returned from controller
+		and the contents depends on the command code
+
+(E) Checksum
+    checksum of length and status or data byte
+
diff --git a/Documentation/scsi/arcmsr_spec.txt b/Documentation/scsi/arcmsr_spec.txt
deleted file mode 100644
index 45d9482..0000000
--- a/Documentation/scsi/arcmsr_spec.txt
+++ /dev/null
@@ -1,574 +0,0 @@
-*******************************************************************************
-**                            ARECA FIRMWARE SPEC
-*******************************************************************************
-**	Usage of IOP331 adapter
-**	(All In/Out is in IOP331's view)
-**	1. Message 0 --> InitThread message and return code
-**	2. Doorbell is used for RS-232 emulation
-**		inDoorBell :    bit0 -- data in ready
-**			(DRIVER DATA WRITE OK)
-**				bit1 -- data out has been read
-**			(DRIVER DATA READ OK)
-**		outDooeBell:    bit0 -- data out ready
-**			(IOP331 DATA WRITE OK)
-**				bit1 -- data in has been read
-**			(IOP331 DATA READ OK)
-**	3. Index Memory Usage
-**	offset 0xf00 : for RS232 out (request buffer)
-**	offset 0xe00 : for RS232 in  (scratch buffer)
-**	offset 0xa00 : for inbound message code message_rwbuffer
-**			(driver send to IOP331)
-**	offset 0xa00 : for outbound message code message_rwbuffer
-**			(IOP331 send to driver)
-**	4. RS-232 emulation
-**		Currently 128 byte buffer is used
-**			1st uint32_t : Data length (1--124)
-**			Byte 4--127  : Max 124 bytes of data
-**	5. PostQ
-**	All SCSI Command must be sent through postQ:
-**	(inbound queue port)	Request frame must be 32 bytes aligned
-**	#bit27--bit31 => flag for post ccb
-**	#bit0--bit26  => real address (bit27--bit31) of post arcmsr_cdb
-**		bit31 :
-**			0 : 256 bytes frame
-**			1 : 512 bytes frame
-**		bit30 :
-**			0 : normal request
-**			1 : BIOS request
-**		bit29 : reserved
-**		bit28 : reserved
-**		bit27 : reserved
-**  ---------------------------------------------------------------------------
-**	(outbount queue port)	Request reply
-**	#bit27--bit31
-**		=> flag for reply
-**	#bit0--bit26
-**		=> real address (bit27--bit31) of reply arcmsr_cdb
-**			bit31 : must be 0 (for this type of reply)
-**			bit30 : reserved for BIOS handshake
-**			bit29 : reserved
-**			bit28 :
-**			0 : no error, ignore AdapStatus/DevStatus/SenseData
-**			1 : Error, error code in AdapStatus/DevStatus/SenseData
-**			bit27 : reserved
-**	6. BIOS request
-**		All BIOS request is the same with request from PostQ
-**		Except :
-**			Request frame is sent from configuration space
-**		offset: 0x78 : Request Frame (bit30 == 1)
-**		offset: 0x18 : writeonly to generate
-**					IRQ to IOP331
-**		Completion of request:
-**			(bit30 == 0, bit28==err flag)
-**	7. Definition of SGL entry (structure)
-**	8. Message1 Out - Diag Status Code (????)
-**	9. Message0 message code :
-**		0x00 : NOP
-**		0x01 : Get Config
-**		->offset 0xa00 :for outbound message code message_rwbuffer
-**		(IOP331 send to driver)
-**		Signature             0x87974060(4)
-**		Request len           0x00000200(4)
-**		numbers of queue      0x00000100(4)
-**		SDRAM Size            0x00000100(4)-->256 MB
-**		IDE Channels          0x00000008(4)
-**		vendor                40 bytes char
-**		model                  8 bytes char
-**		FirmVer               16 bytes char
-**		Device Map            16 bytes char
-**		FirmwareVersion DWORD <== Added for checking of
-**						new firmware capability
-**		0x02 : Set Config
-**		->offset 0xa00 :for inbound message code message_rwbuffer
-**		(driver send to IOP331)
-**		Signature             0x87974063(4)
-**		UPPER32 of Request Frame  (4)-->Driver Only
-**		0x03 : Reset (Abort all queued Command)
-**		0x04 : Stop Background Activity
-**		0x05 : Flush Cache
-**		0x06 : Start Background Activity
-**			(re-start if background is halted)
-**		0x07 : Check If Host Command Pending
-**			(Novell May Need This Function)
-**		0x08 : Set controller time
-**		->offset 0xa00 : for inbound message code message_rwbuffer
-**		(driver to IOP331)
-**		byte 0 : 0xaa <-- signature
-**		byte 1 : 0x55 <-- signature
-**		byte 2 : year (04)
-**		byte 3 : month (1..12)
-**		byte 4 : date (1..31)
-**		byte 5 : hour (0..23)
-**		byte 6 : minute (0..59)
-**		byte 7 : second (0..59)
-*******************************************************************************
-*******************************************************************************
-**      	RS-232 Interface for Areca Raid Controller
-**      The low level command interface is exclusive with VT100 terminal
-**  --------------------------------------------------------------------
-**      1. Sequence of command execution
-**  --------------------------------------------------------------------
-**    	(A) Header : 3 bytes sequence (0x5E, 0x01, 0x61)
-**    	(B) Command block : variable length of data including length,
-**    		command code, data and checksum byte
-**    	(C) Return data : variable length of data
-**  --------------------------------------------------------------------
-**    2. Command block
-**  --------------------------------------------------------------------
-**    	(A) 1st byte : command block length (low byte)
-**    	(B) 2nd byte : command block length (high byte)
-**                note ..command block length shouldn't > 2040 bytes,
-**    		length excludes these two bytes
-**    	(C) 3rd byte : command code
-**    	(D) 4th and following bytes : variable length data bytes
-**    		depends on command code
-**    	(E) last byte : checksum byte (sum of 1st byte until last data byte)
-**  --------------------------------------------------------------------
-**    3. Command code and associated data
-**  --------------------------------------------------------------------
-**    	The following are command code defined in raid controller Command
-**    	code 0x10--0x1? are used for system level management,
-**    	no password checking is needed and should be implemented in separate
-**    	well controlled utility and not for end user access.
-**    	Command code 0x20--0x?? always check the password,
-**    	password must be entered to enable these command.
-**    	enum
-**    	{
-**    		GUI_SET_SERIAL=0x10,
-**    		GUI_SET_VENDOR,
-**    		GUI_SET_MODEL,
-**    		GUI_IDENTIFY,
-**    		GUI_CHECK_PASSWORD,
-**    		GUI_LOGOUT,
-**    		GUI_HTTP,
-**    		GUI_SET_ETHERNET_ADDR,
-**    		GUI_SET_LOGO,
-**    		GUI_POLL_EVENT,
-**    		GUI_GET_EVENT,
-**    		GUI_GET_HW_MONITOR,
-**    		//    GUI_QUICK_CREATE=0x20, (function removed)
-**    		GUI_GET_INFO_R=0x20,
-**    		GUI_GET_INFO_V,
-**    		GUI_GET_INFO_P,
-**    		GUI_GET_INFO_S,
-**    		GUI_CLEAR_EVENT,
-**    		GUI_MUTE_BEEPER=0x30,
-**    		GUI_BEEPER_SETTING,
-**    		GUI_SET_PASSWORD,
-**    		GUI_HOST_INTERFACE_MODE,
-**    		GUI_REBUILD_PRIORITY,
-**    		GUI_MAX_ATA_MODE,
-**    		GUI_RESET_CONTROLLER,
-**    		GUI_COM_PORT_SETTING,
-**    		GUI_NO_OPERATION,
-**    		GUI_DHCP_IP,
-**    		GUI_CREATE_PASS_THROUGH=0x40,
-**    		GUI_MODIFY_PASS_THROUGH,
-**    		GUI_DELETE_PASS_THROUGH,
-**    		GUI_IDENTIFY_DEVICE,
-**    		GUI_CREATE_RAIDSET=0x50,
-**    		GUI_DELETE_RAIDSET,
-**    		GUI_EXPAND_RAIDSET,
-**    		GUI_ACTIVATE_RAIDSET,
-**    		GUI_CREATE_HOT_SPARE,
-**    		GUI_DELETE_HOT_SPARE,
-**    		GUI_CREATE_VOLUME=0x60,
-**    		GUI_MODIFY_VOLUME,
-**    		GUI_DELETE_VOLUME,
-**    		GUI_START_CHECK_VOLUME,
-**    		GUI_STOP_CHECK_VOLUME
-**    	};
-**    Command description :
-**    	GUI_SET_SERIAL : Set the controller serial#
-**    		byte 0,1        : length
-**    		byte 2          : command code 0x10
-**    		byte 3          : password length (should be 0x0f)
-**    		byte 4-0x13     : should be "ArEcATecHnoLogY"
-**    		byte 0x14--0x23 : Serial number string (must be 16 bytes)
-**      GUI_SET_VENDOR : Set vendor string for the controller
-**    		byte 0,1        : length
-**    		byte 2          : command code 0x11
-**    		byte 3          : password length (should be 0x08)
-**    		byte 4-0x13     : should be "ArEcAvAr"
-**    		byte 0x14--0x3B : vendor string (must be 40 bytes)
-**      GUI_SET_MODEL : Set the model name of the controller
-**    		byte 0,1        : length
-**    		byte 2          : command code 0x12
-**    		byte 3          : password length (should be 0x08)
-**    		byte 4-0x13     : should be "ArEcAvAr"
-**    		byte 0x14--0x1B : model string (must be 8 bytes)
-**      GUI_IDENTIFY : Identify device
-**    		byte 0,1        : length
-**    		byte 2          : command code 0x13
-**    		                  return "Areca RAID Subsystem "
-**      GUI_CHECK_PASSWORD : Verify password
-**    		byte 0,1        : length
-**    		byte 2          : command code 0x14
-**    		byte 3          : password length
-**    		byte 4-0x??     : user password to be checked
-**      GUI_LOGOUT : Logout GUI (force password checking on next command)
-**    		byte 0,1        : length
-**    		byte 2          : command code 0x15
-**      GUI_HTTP : HTTP interface (reserved for Http proxy service)(0x16)
-**
-**      GUI_SET_ETHERNET_ADDR : Set the ethernet MAC address
-**    		byte 0,1        : length
-**    		byte 2          : command code 0x17
-**    		byte 3          : password length (should be 0x08)
-**    		byte 4-0x13     : should be "ArEcAvAr"
-**    		byte 0x14--0x19 : Ethernet MAC address (must be 6 bytes)
-**      GUI_SET_LOGO : Set logo in HTTP
-**    		byte 0,1        : length
-**    		byte 2          : command code 0x18
-**    		byte 3          : Page# (0/1/2/3) (0xff --> clear OEM logo)
-**    		byte 4/5/6/7    : 0x55/0xaa/0xa5/0x5a
-**    		byte 8          : TITLE.JPG data (each page must be 2000 bytes)
-**    		                  note page0 1st 2 byte must be
-**    					actual length of the JPG file
-**      GUI_POLL_EVENT : Poll If Event Log Changed
-**    		byte 0,1        : length
-**    		byte 2          : command code 0x19
-**      GUI_GET_EVENT : Read Event
-**    		byte 0,1        : length
-**    		byte 2          : command code 0x1a
-**    		byte 3          : Event Page (0:1st page/1/2/3:last page)
-**      GUI_GET_HW_MONITOR : Get HW monitor data
-**    		byte 0,1        : length
-**    		byte 2 			: command code 0x1b
-**    		byte 3 			: # of FANs(example 2)
-**    		byte 4 			: # of Voltage sensor(example 3)
-**    		byte 5 			: # of temperature sensor(example 2)
-**    		byte 6 			: # of power
-**    		byte 7/8        : Fan#0 (RPM)
-**    		byte 9/10       : Fan#1
-**    		byte 11/12 		: Voltage#0 original value in *1000
-**    		byte 13/14 		: Voltage#0 value
-**    		byte 15/16 		: Voltage#1 org
-**    		byte 17/18 		: Voltage#1
-**    		byte 19/20 		: Voltage#2 org
-**    		byte 21/22 		: Voltage#2
-**    		byte 23 		: Temp#0
-**    		byte 24 		: Temp#1
-**    		byte 25 		: Power indicator (bit0 : power#0,
-**    						 bit1 : power#1)
-**    		byte 26 		: UPS indicator
-**      GUI_QUICK_CREATE : Quick create raid/volume set
-**    	    byte 0,1        : length
-**    	    byte 2          : command code 0x20
-**    	    byte 3/4/5/6    : raw capacity
-**    	    byte 7 			: raid level
-**    	    byte 8 			: stripe size
-**    	    byte 9 			: spare
-**    	    byte 10/11/12/13: device mask (the devices to create raid/volume)
-**    		This function is removed, application like
-**    		to implement quick create function
-**    	need to use GUI_CREATE_RAIDSET and GUI_CREATE_VOLUMESET function.
-**      GUI_GET_INFO_R : Get Raid Set Information
-**    		byte 0,1        : length
-**    		byte 2          : command code 0x20
-**    		byte 3          : raidset#
-**    	typedef struct sGUI_RAIDSET
-**    	{
-**    		BYTE grsRaidSetName[16];
-**    		DWORD grsCapacity;
-**    		DWORD grsCapacityX;
-**    		DWORD grsFailMask;
-**    		BYTE grsDevArray[32];
-**    		BYTE grsMemberDevices;
-**    		BYTE grsNewMemberDevices;
-**    		BYTE grsRaidState;
-**    		BYTE grsVolumes;
-**    		BYTE grsVolumeList[16];
-**    		BYTE grsRes1;
-**    		BYTE grsRes2;
-**    		BYTE grsRes3;
-**    		BYTE grsFreeSegments;
-**    		DWORD grsRawStripes[8];
-**    		DWORD grsRes4;
-**    		DWORD grsRes5; //     Total to 128 bytes
-**    		DWORD grsRes6; //     Total to 128 bytes
-**    	} sGUI_RAIDSET, *pGUI_RAIDSET;
-**      GUI_GET_INFO_V : Get Volume Set Information
-**    		byte 0,1        : length
-**    		byte 2          : command code 0x21
-**    		byte 3          : volumeset#
-**    	typedef struct sGUI_VOLUMESET
-**    	{
-**    		BYTE gvsVolumeName[16]; //     16
-**    		DWORD gvsCapacity;
-**    		DWORD gvsCapacityX;
-**    		DWORD gvsFailMask;
-**    		DWORD gvsStripeSize;
-**    		DWORD gvsNewFailMask;
-**    		DWORD gvsNewStripeSize;
-**    		DWORD gvsVolumeStatus;
-**    		DWORD gvsProgress; //     32
-**    		sSCSI_ATTR gvsScsi;
-**    		BYTE gvsMemberDisks;
-**    		BYTE gvsRaidLevel; //     8
-**    		BYTE gvsNewMemberDisks;
-**    		BYTE gvsNewRaidLevel;
-**    		BYTE gvsRaidSetNumber;
-**    		BYTE gvsRes0; //     4
-**    		BYTE gvsRes1[4]; //     64 bytes
-**    	} sGUI_VOLUMESET, *pGUI_VOLUMESET;
-**      GUI_GET_INFO_P : Get Physical Drive Information
-**    		byte 0,1        : length
-**    		byte 2          : command code 0x22
-**    		byte 3          : drive # (from 0 to max-channels - 1)
-**    	typedef struct sGUI_PHY_DRV
-**    	{
-**    		BYTE gpdModelName[40];
-**    		BYTE gpdSerialNumber[20];
-**    		BYTE gpdFirmRev[8];
-**    		DWORD gpdCapacity;
-**    		DWORD gpdCapacityX; //     Reserved for expansion
-**    		BYTE gpdDeviceState;
-**    		BYTE gpdPioMode;
-**    		BYTE gpdCurrentUdmaMode;
-**    		BYTE gpdUdmaMode;
-**    		BYTE gpdDriveSelect;
-**    		BYTE gpdRaidNumber; //     0xff if not belongs to a raid set
-**    		sSCSI_ATTR gpdScsi;
-**    		BYTE gpdReserved[40]; //     Total to 128 bytes
-**    	} sGUI_PHY_DRV, *pGUI_PHY_DRV;
-**    	GUI_GET_INFO_S : Get System Information
-**      	byte 0,1        : length
-**      	byte 2          : command code 0x23
-**    	typedef struct sCOM_ATTR
-**    	{
-**    		BYTE comBaudRate;
-**    		BYTE comDataBits;
-**    		BYTE comStopBits;
-**    		BYTE comParity;
-**    		BYTE comFlowControl;
-**    	} sCOM_ATTR, *pCOM_ATTR;
-**    	typedef struct sSYSTEM_INFO
-**    	{
-**    		BYTE gsiVendorName[40];
-**    		BYTE gsiSerialNumber[16];
-**    		BYTE gsiFirmVersion[16];
-**    		BYTE gsiBootVersion[16];
-**    		BYTE gsiMbVersion[16];
-**    		BYTE gsiModelName[8];
-**    		BYTE gsiLocalIp[4];
-**    		BYTE gsiCurrentIp[4];
-**    		DWORD gsiTimeTick;
-**    		DWORD gsiCpuSpeed;
-**    		DWORD gsiICache;
-**    		DWORD gsiDCache;
-**    		DWORD gsiScache;
-**    		DWORD gsiMemorySize;
-**    		DWORD gsiMemorySpeed;
-**    		DWORD gsiEvents;
-**    		BYTE gsiMacAddress[6];
-**    		BYTE gsiDhcp;
-**    		BYTE gsiBeeper;
-**    		BYTE gsiChannelUsage;
-**    		BYTE gsiMaxAtaMode;
-**    		BYTE gsiSdramEcc; //     1:if ECC enabled
-**    		BYTE gsiRebuildPriority;
-**    		sCOM_ATTR gsiComA; //     5 bytes
-**    		sCOM_ATTR gsiComB; //     5 bytes
-**    		BYTE gsiIdeChannels;
-**    		BYTE gsiScsiHostChannels;
-**    		BYTE gsiIdeHostChannels;
-**    		BYTE gsiMaxVolumeSet;
-**    		BYTE gsiMaxRaidSet;
-**    		BYTE gsiEtherPort; //     1:if ether net port supported
-**    		BYTE gsiRaid6Engine; //     1:Raid6 engine supported
-**    		BYTE gsiRes[75];
-**    	} sSYSTEM_INFO, *pSYSTEM_INFO;
-**    	GUI_CLEAR_EVENT : Clear System Event
-**    		byte 0,1        : length
-**    		byte 2          : command code 0x24
-**      GUI_MUTE_BEEPER : Mute current beeper
-**    		byte 0,1        : length
-**    		byte 2          : command code 0x30
-**      GUI_BEEPER_SETTING : Disable beeper
-**    		byte 0,1        : length
-**    		byte 2          : command code 0x31
-**    		byte 3          : 0->disable, 1->enable
-**      GUI_SET_PASSWORD : Change password
-**    		byte 0,1        : length
-**    		byte 2 			: command code 0x32
-**    		byte 3 			: pass word length ( must <= 15 )
-**    		byte 4 			: password (must be alpha-numerical)
-**    	GUI_HOST_INTERFACE_MODE : Set host interface mode
-**    		byte 0,1        : length
-**    		byte 2 			: command code 0x33
-**    		byte 3 			: 0->Independent, 1->cluster
-**      GUI_REBUILD_PRIORITY : Set rebuild priority
-**    		byte 0,1        : length
-**    		byte 2 			: command code 0x34
-**    		byte 3 			: 0/1/2/3 (low->high)
-**      GUI_MAX_ATA_MODE : Set maximum ATA mode to be used
-**    		byte 0,1        : length
-**    		byte 2 			: command code 0x35
-**    		byte 3 			: 0/1/2/3 (133/100/66/33)
-**      GUI_RESET_CONTROLLER : Reset Controller
-**    		byte 0,1        : length
-**    		byte 2          : command code 0x36
-**                            *Response with VT100 screen (discard it)
-**      GUI_COM_PORT_SETTING : COM port setting
-**    		byte 0,1        : length
-**    		byte 2 			: command code 0x37
-**    		byte 3 			: 0->COMA (term port),
-**    					  1->COMB (debug port)
-**    		byte 4 			: 0/1/2/3/4/5/6/7
-**    			(1200/2400/4800/9600/19200/38400/57600/115200)
-**    		byte 5 			: data bit
-**    					(0:7 bit, 1:8 bit : must be 8 bit)
-**    		byte 6 			: stop bit (0:1, 1:2 stop bits)
-**    		byte 7 			: parity (0:none, 1:off, 2:even)
-**    		byte 8 			: flow control
-**    			(0:none, 1:xon/xoff, 2:hardware => must use none)
-**      GUI_NO_OPERATION : No operation
-**    		byte 0,1        : length
-**    		byte 2          : command code 0x38
-**      GUI_DHCP_IP : Set DHCP option and local IP address
-**    		byte 0,1        : length
-**    		byte 2          : command code 0x39
-**    		byte 3          : 0:dhcp disabled, 1:dhcp enabled
-**    		byte 4/5/6/7    : IP address
-**      GUI_CREATE_PASS_THROUGH : Create pass through disk
-**    		byte 0,1        : length
-**    		byte 2 			: command code 0x40
-**    		byte 3 			: device #
-**    		byte 4 			: scsi channel (0/1)
-**    		byte 5 			: scsi id (0-->15)
-**    		byte 6 			: scsi lun (0-->7)
-**    		byte 7 			: tagged queue (1 : enabled)
-**    		byte 8 			: cache mode (1 : enabled)
-**    		byte 9 			: max speed (0/1/2/3/4,
-**    			async/20/40/80/160 for scsi)
-**    			(0/1/2/3/4, 33/66/100/133/150 for ide  )
-**      GUI_MODIFY_PASS_THROUGH : Modify pass through disk
-**    		byte 0,1        : length
-**    		byte 2 			: command code 0x41
-**    		byte 3 			: device #
-**    		byte 4 			: scsi channel (0/1)
-**    		byte 5 			: scsi id (0-->15)
-**    		byte 6 			: scsi lun (0-->7)
-**    		byte 7 			: tagged queue (1 : enabled)
-**    		byte 8 			: cache mode (1 : enabled)
-**    		byte 9 			: max speed (0/1/2/3/4,
-**    					async/20/40/80/160 for scsi)
-**    			(0/1/2/3/4, 33/66/100/133/150 for ide  )
-**      GUI_DELETE_PASS_THROUGH : Delete pass through disk
-**    		byte 0,1        : length
-**    		byte 2          : command code 0x42
-**    		byte 3          : device# to be deleted
-**      GUI_IDENTIFY_DEVICE : Identify Device
-**    		byte 0,1        : length
-**    		byte 2          : command code 0x43
-**    		byte 3          : Flash Method
-**    				(0:flash selected, 1:flash not selected)
-**    		byte 4/5/6/7    : IDE device mask to be flashed
-**                           note .... no response data available
-**    	GUI_CREATE_RAIDSET : Create Raid Set
-**    		byte 0,1        : length
-**    		byte 2          : command code 0x50
-**    		byte 3/4/5/6    : device mask
-**    		byte 7-22       : raidset name (if byte 7 == 0:use default)
-**      GUI_DELETE_RAIDSET : Delete Raid Set
-**    		byte 0,1        : length
-**    		byte 2          : command code 0x51
-**    		byte 3          : raidset#
-**    	GUI_EXPAND_RAIDSET : Expand Raid Set
-**    		byte 0,1        : length
-**    		byte 2          : command code 0x52
-**    		byte 3          : raidset#
-**    		byte 4/5/6/7    : device mask for expansion
-**    		byte 8/9/10     : (8:0 no change, 1 change, 0xff:terminate,
-**    				9:new raid level,
-**    				10:new stripe size
-**    				0/1/2/3/4/5->4/8/16/32/64/128K )
-**    		byte 11/12/13   : repeat for each volume in the raidset
-**      GUI_ACTIVATE_RAIDSET : Activate incomplete raid set
-**    		byte 0,1        : length
-**    		byte 2          : command code 0x53
-**    		byte 3          : raidset#
-**      GUI_CREATE_HOT_SPARE : Create hot spare disk
-**    		byte 0,1        : length
-**    		byte 2          : command code 0x54
-**    		byte 3/4/5/6    : device mask for hot spare creation
-**    	GUI_DELETE_HOT_SPARE : Delete hot spare disk
-**    		byte 0,1        : length
-**    		byte 2          : command code 0x55
-**    		byte 3/4/5/6    : device mask for hot spare deletion
-**    	GUI_CREATE_VOLUME : Create volume set
-**    		byte 0,1        : length
-**    		byte 2          : command code 0x60
-**    		byte 3          : raidset#
-**    		byte 4-19       : volume set name
-**    				(if byte4 == 0, use default)
-**    		byte 20-27      : volume capacity (blocks)
-**    		byte 28 		: raid level
-**    		byte 29 		: stripe size
-**    				(0/1/2/3/4/5->4/8/16/32/64/128K)
-**    		byte 30 		: channel
-**    		byte 31 		: ID
-**    		byte 32 		: LUN
-**    		byte 33 		: 1 enable tag
-**    		byte 34 		: 1 enable cache
-**    		byte 35 		: speed
-**    		(0/1/2/3/4->async/20/40/80/160 for scsi)
-**    		(0/1/2/3/4->33/66/100/133/150 for IDE  )
-**    		byte 36 		: 1 to select quick init
-**
-**    	GUI_MODIFY_VOLUME : Modify volume Set
-**    		byte 0,1        : length
-**    		byte 2          : command code 0x61
-**    		byte 3          : volumeset#
-**    		byte 4-19       : new volume set name
-**    		(if byte4 == 0, not change)
-**    		byte 20-27      : new volume capacity (reserved)
-**    		byte 28 		: new raid level
-**    		byte 29 		: new stripe size
-**    		(0/1/2/3/4/5->4/8/16/32/64/128K)
-**    		byte 30 		: new channel
-**    		byte 31 		: new ID
-**    		byte 32 		: new LUN
-**    		byte 33 		: 1 enable tag
-**    		byte 34 		: 1 enable cache
-**    		byte 35 		: speed
-**    		(0/1/2/3/4->async/20/40/80/160 for scsi)
-**    		(0/1/2/3/4->33/66/100/133/150 for IDE  )
-**    	GUI_DELETE_VOLUME : Delete volume set
-**    		byte 0,1        : length
-**    		byte 2          : command code 0x62
-**    		byte 3          : volumeset#
-**    	GUI_START_CHECK_VOLUME : Start volume consistency check
-**    		byte 0,1        : length
-**    		byte 2          : command code 0x63
-**    		byte 3          : volumeset#
-**    	GUI_STOP_CHECK_VOLUME : Stop volume consistency check
-**    		byte 0,1        : length
-**    		byte 2          : command code 0x64
-** ---------------------------------------------------------------------
-**    4. Returned data
-** ---------------------------------------------------------------------
-**    	(A) Header          : 3 bytes sequence (0x5E, 0x01, 0x61)
-**    	(B) Length          : 2 bytes
-**    			(low byte 1st, excludes length and checksum byte)
-**    	(C) status or data  :
-**           <1> If length == 1 ==> 1 byte status code
-**    		#define GUI_OK                    0x41
-**    		#define GUI_RAIDSET_NOT_NORMAL    0x42
-**    		#define GUI_VOLUMESET_NOT_NORMAL  0x43
-**    		#define GUI_NO_RAIDSET            0x44
-**    		#define GUI_NO_VOLUMESET          0x45
-**    		#define GUI_NO_PHYSICAL_DRIVE     0x46
-**    		#define GUI_PARAMETER_ERROR       0x47
-**    		#define GUI_UNSUPPORTED_COMMAND   0x48
-**    		#define GUI_DISK_CONFIG_CHANGED   0x49
-**    		#define GUI_INVALID_PASSWORD      0x4a
-**    		#define GUI_NO_DISK_SPACE         0x4b
-**    		#define GUI_CHECKSUM_ERROR        0x4c
-**    		#define GUI_PASSWORD_REQUIRED     0x4d
-**           <2> If length > 1 ==>
-**    		data block returned from controller
-**    		and the contents depends on the command code
-**    	(E) Checksum        : checksum of length and status or data byte
-**************************************************************************
diff --git a/Documentation/scsi/bfa.rst b/Documentation/scsi/bfa.rst
new file mode 100644
index 0000000..3abc041
--- /dev/null
+++ b/Documentation/scsi/bfa.rst
@@ -0,0 +1,92 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================================
+Linux driver for Brocade FC/FCOE adapters
+=========================================
+
+Supported Hardware
+------------------
+
+bfa 3.0.2.2 driver supports all Brocade FC/FCOE adapters. Below is a list of
+adapter models with corresponding PCIIDs.
+
+	===================	===========================================
+	PCIID			Model
+	===================	===========================================
+	1657:0013:1657:0014	425 4Gbps dual port FC HBA
+	1657:0013:1657:0014	825 8Gbps PCIe dual port FC HBA
+	1657:0013:103c:1742	HP 82B 8Gbps PCIedual port FC HBA
+	1657:0013:103c:1744	HP 42B 4Gbps dual port FC HBA
+	1657:0017:1657:0014	415 4Gbps single port FC HBA
+	1657:0017:1657:0014	815 8Gbps single port FC HBA
+	1657:0017:103c:1741	HP 41B 4Gbps single port FC HBA
+	1657:0017:103c 1743	HP 81B 8Gbps single port FC HBA
+	1657:0021:103c:1779	804 8Gbps FC HBA for HP Bladesystem c-class
+
+	1657:0014:1657:0014	1010 10Gbps single port CNA - FCOE
+	1657:0014:1657:0014	1020 10Gbps dual port CNA - FCOE
+	1657:0014:1657:0014	1007 10Gbps dual port CNA - FCOE
+	1657:0014:1657:0014	1741 10Gbps dual port CNA - FCOE
+
+	1657:0022:1657:0024	1860 16Gbps FC HBA
+	1657:0022:1657:0022	1860 10Gbps CNA - FCOE
+	===================	===========================================
+
+
+Firmware download
+-----------------
+
+The latest Firmware package for 3.0.2.2 bfa driver can be found at:
+
+http://www.brocade.com/services-support/drivers-downloads/adapters/Linux.page
+
+and then click following respective util package link:
+
+	=========	=======================================================
+	Version		Link
+	=========	=======================================================
+	v3.0.0.0	Linux Adapter Firmware package for RHEL 6.2, SLES 11SP2
+	=========	=======================================================
+
+
+Configuration & Management utility download
+-------------------------------------------
+
+The latest driver configuration & management utility for 3.0.2.2 bfa driver can
+be found at:
+
+http://www.brocade.com/services-support/drivers-downloads/adapters/Linux.page
+
+and then click following respective util package link
+
+	=========	=======================================================
+	Version		Link
+	=========	=======================================================
+	v3.0.2.0	Linux Adapter Firmware package for RHEL 6.2, SLES 11SP2
+	=========	=======================================================
+
+
+Documentation
+-------------
+
+The latest Administration's Guide, Installation and Reference Manual,
+Troubleshooting Guide, and Release Notes for the corresponding out-of-box
+driver can be found at:
+
+http://www.brocade.com/services-support/drivers-downloads/adapters/Linux.page
+
+and use the following inbox and out-of-box driver version mapping to find
+the corresponding documentation:
+
+	=============		==================
+	Inbox Version		Out-of-box Version
+	=============		==================
+	v3.0.2.2		v3.0.0.0
+	=============		==================
+
+Support
+-------
+
+For general product and support info, go to the Brocade website at:
+
+http://www.brocade.com/services-support/index.page
diff --git a/Documentation/scsi/bfa.txt b/Documentation/scsi/bfa.txt
deleted file mode 100644
index 3cc4d80..0000000
--- a/Documentation/scsi/bfa.txt
+++ /dev/null
@@ -1,82 +0,0 @@
-Linux driver for Brocade FC/FCOE adapters
-
-
-Supported Hardware
-------------------
-
-bfa 3.0.2.2 driver supports all Brocade FC/FCOE adapters. Below is a list of
-adapter models with corresponding PCIIDs.
-
-	PCIID		  	Model
-
-	1657:0013:1657:0014	425 4Gbps dual port FC HBA
-	1657:0013:1657:0014	825 8Gbps PCIe dual port FC HBA
-	1657:0013:103c:1742	HP 82B 8Gbps PCIedual port FC HBA
-	1657:0013:103c:1744	HP 42B 4Gbps dual port FC HBA
-	1657:0017:1657:0014	415 4Gbps single port FC HBA
-	1657:0017:1657:0014	815 8Gbps single port FC HBA
-	1657:0017:103c:1741	HP 41B 4Gbps single port FC HBA
-	1657:0017:103c 1743	HP 81B 8Gbps single port FC HBA
-	1657:0021:103c:1779	804 8Gbps FC HBA for HP Bladesystem c-class
-
-	1657:0014:1657:0014	1010 10Gbps single port CNA - FCOE
-	1657:0014:1657:0014	1020 10Gbps dual port CNA - FCOE
-	1657:0014:1657:0014	1007 10Gbps dual port CNA - FCOE
-	1657:0014:1657:0014	1741 10Gbps dual port CNA - FCOE
-
-	1657:0022:1657:0024	1860 16Gbps FC HBA
-	1657:0022:1657:0022	1860 10Gbps CNA - FCOE
-
-
-Firmware download
------------------
-
-The latest Firmware package for 3.0.2.2 bfa driver can be found at:
-
-http://www.brocade.com/services-support/drivers-downloads/adapters/Linux.page
-
-and then click following respective util package link:
-
-	Version			Link
-
-	v3.0.0.0	Linux Adapter Firmware package for RHEL 6.2, SLES 11SP2
-
-
-Configuration & Management utility download
--------------------------------------------
-
-The latest driver configuration & management utility for 3.0.2.2 bfa driver can
-be found at:
-
-http://www.brocade.com/services-support/drivers-downloads/adapters/Linux.page
-
-and then click following respective util package link
-
-	Version			Link
-
-	v3.0.2.0	Linux Adapter Firmware package for RHEL 6.2, SLES 11SP2
-
-
-Documentation
--------------
-
-The latest Administration's Guide, Installation and Reference Manual,
-Troubleshooting Guide, and Release Notes for the corresponding out-of-box
-driver can be found at:
-
-http://www.brocade.com/services-support/drivers-downloads/adapters/Linux.page
-
-and use the following inbox and out-of-box driver version mapping to find
-the corresponding documentation:
-
-	Inbox Version		Out-of-box Version
-
-	v3.0.2.2		v3.0.0.0
-
-
-Support
--------
-
-For general product and support info, go to the Brocade website at:
-
-http://www.brocade.com/services-support/index.page
diff --git a/Documentation/scsi/bnx2fc.rst b/Documentation/scsi/bnx2fc.rst
new file mode 100644
index 0000000..2fef2df
--- /dev/null
+++ b/Documentation/scsi/bnx2fc.rst
@@ -0,0 +1,81 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===========================
+Operating FCoE using bnx2fc
+===========================
+Broadcom FCoE offload through bnx2fc is full stateful hardware offload that
+cooperates with all interfaces provided by the Linux ecosystem for FC/FCoE and
+SCSI controllers.  As such, FCoE functionality, once enabled is largely
+transparent. Devices discovered on the SAN will be registered and unregistered
+automatically with the upper storage layers.
+
+Despite the fact that the Broadcom's FCoE offload is fully offloaded, it does
+depend on the state of the network interfaces to operate. As such, the network
+interface (e.g. eth0) associated with the FCoE offload initiator must be 'up'.
+It is recommended that the network interfaces be configured to be brought up
+automatically at boot time.
+
+Furthermore, the Broadcom FCoE offload solution creates VLAN interfaces to
+support the VLANs that have been discovered for FCoE operation (e.g.
+eth0.1001-fcoe).  Do not delete or disable these interfaces or FCoE operation
+will be disrupted.
+
+Driver Usage Model:
+===================
+
+1. Ensure that fcoe-utils package is installed.
+
+2. Configure the interfaces on which bnx2fc driver has to operate on.
+Here are the steps to configure:
+
+	a. cd /etc/fcoe
+	b. copy cfg-ethx to cfg-eth5 if FCoE has to be enabled on eth5.
+	c. Repeat this for all the interfaces where FCoE has to be enabled.
+	d. Edit all the cfg-eth files to set "no" for DCB_REQUIRED** field, and
+	   "yes" for AUTO_VLAN.
+	e. Other configuration parameters should be left as default
+
+3. Ensure that "bnx2fc" is in SUPPORTED_DRIVERS list in /etc/fcoe/config.
+
+4. Start fcoe service. (service fcoe start). If Broadcom devices are present in
+the system, bnx2fc driver would automatically claim the interfaces, starts vlan
+discovery and log into the targets.
+
+5. "Symbolic Name" in 'fcoeadm -i' output would display if bnx2fc has claimed
+the interface.
+
+Eg::
+
+ [root@bh2 ~]# fcoeadm -i
+    Description:      NetXtreme II BCM57712 10 Gigabit Ethernet
+    Revision:         01
+    Manufacturer:     Broadcom Corporation
+    Serial Number:    0010186FD558
+    Driver:           bnx2x 1.70.00-0
+    Number of Ports:  2
+
+        Symbolic Name:     bnx2fc v1.0.5 over eth5.4
+        OS Device Name:    host11
+        Node Name:         0x10000010186FD559
+        Port Name:         0x20000010186FD559
+        FabricName:        0x2001000DECB3B681
+        Speed:             10 Gbit
+        Supported Speed:   10 Gbit
+        MaxFrameSize:      2048
+        FC-ID (Port ID):   0x0F0377
+        State:             Online
+
+6. Verify the vlan discovery is performed by running ifconfig and notice
+   <INTERFACE>.<VLAN>-fcoe interfaces are automatically created.
+
+Refer to fcoeadm manpage for more information on fcoeadm operations to
+create/destroy interfaces or to display lun/target information.
+
+NOTE
+====
+** Broadcom FCoE capable devices implement a DCBX/LLDP client on-chip. Only one
+LLDP client is allowed per interface. For proper operation all host software
+based DCBX/LLDP clients (e.g. lldpad) must be disabled. To disable lldpad on a
+given interface, run the following command::
+
+	lldptool set-lldp -i <interface_name> adminStatus=disabled
diff --git a/Documentation/scsi/bnx2fc.txt b/Documentation/scsi/bnx2fc.txt
deleted file mode 100644
index 8082355..0000000
--- a/Documentation/scsi/bnx2fc.txt
+++ /dev/null
@@ -1,75 +0,0 @@
-Operating FCoE using bnx2fc
-===========================
-Broadcom FCoE offload through bnx2fc is full stateful hardware offload that
-cooperates with all interfaces provided by the Linux ecosystem for FC/FCoE and
-SCSI controllers.  As such, FCoE functionality, once enabled is largely
-transparent. Devices discovered on the SAN will be registered and unregistered
-automatically with the upper storage layers.
-
-Despite the fact that the Broadcom's FCoE offload is fully offloaded, it does
-depend on the state of the network interfaces to operate. As such, the network
-interface (e.g. eth0) associated with the FCoE offload initiator must be 'up'.
-It is recommended that the network interfaces be configured to be brought up
-automatically at boot time.
-
-Furthermore, the Broadcom FCoE offload solution creates VLAN interfaces to
-support the VLANs that have been discovered for FCoE operation (e.g.
-eth0.1001-fcoe).  Do not delete or disable these interfaces or FCoE operation
-will be disrupted.
-
-Driver Usage Model:
-===================
-
-1. Ensure that fcoe-utils package is installed.
-
-2. Configure the interfaces on which bnx2fc driver has to operate on.
-Here are the steps to configure:
-	a. cd /etc/fcoe
-	b. copy cfg-ethx to cfg-eth5 if FCoE has to be enabled on eth5.
-	c. Repeat this for all the interfaces where FCoE has to be enabled.
-	d. Edit all the cfg-eth files to set "no" for DCB_REQUIRED** field, and
-	   "yes" for AUTO_VLAN.
-	e. Other configuration parameters should be left as default
-
-3. Ensure that "bnx2fc" is in SUPPORTED_DRIVERS list in /etc/fcoe/config.
-
-4. Start fcoe service. (service fcoe start). If Broadcom devices are present in
-the system, bnx2fc driver would automatically claim the interfaces, starts vlan
-discovery and log into the targets.
-
-5. "Symbolic Name" in 'fcoeadm -i' output would display if bnx2fc has claimed
-the interface.
-Eg:
-[root@bh2 ~]# fcoeadm -i
-    Description:      NetXtreme II BCM57712 10 Gigabit Ethernet
-    Revision:         01
-    Manufacturer:     Broadcom Corporation
-    Serial Number:    0010186FD558
-    Driver:           bnx2x 1.70.00-0
-    Number of Ports:  2
-
-        Symbolic Name:     bnx2fc v1.0.5 over eth5.4
-        OS Device Name:    host11
-        Node Name:         0x10000010186FD559
-        Port Name:         0x20000010186FD559
-        FabricName:        0x2001000DECB3B681
-        Speed:             10 Gbit
-        Supported Speed:   10 Gbit
-        MaxFrameSize:      2048
-        FC-ID (Port ID):   0x0F0377
-        State:             Online
-
-6. Verify the vlan discovery is performed by running ifconfig and notice
-<INTERFACE>.<VLAN>-fcoe interfaces are automatically created.
-
-Refer to fcoeadm manpage for more information on fcoeadm operations to
-create/destroy interfaces or to display lun/target information.
-
-NOTE:
-====
-** Broadcom FCoE capable devices implement a DCBX/LLDP client on-chip. Only one
-LLDP client is allowed per interface. For proper operation all host software
-based DCBX/LLDP clients (e.g. lldpad) must be disabled. To disable lldpad on a
-given interface, run the following command:
-
-lldptool set-lldp -i <interface_name> adminStatus=disabled
diff --git a/Documentation/scsi/cxgb3i.rst b/Documentation/scsi/cxgb3i.rst
new file mode 100644
index 0000000..e01f18f
--- /dev/null
+++ b/Documentation/scsi/cxgb3i.rst
@@ -0,0 +1,90 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=================================
+Chelsio S3 iSCSI Driver for Linux
+=================================
+
+Introduction
+============
+
+The Chelsio T3 ASIC based Adapters (S310, S320, S302, S304, Mezz cards, etc.
+series of products) support iSCSI acceleration and iSCSI Direct Data Placement
+(DDP) where the hardware handles the expensive byte touching operations, such
+as CRC computation and verification, and direct DMA to the final host memory
+destination:
+
+	- iSCSI PDU digest generation and verification
+
+	  On transmitting, Chelsio S3 h/w computes and inserts the Header and
+	  Data digest into the PDUs.
+	  On receiving, Chelsio S3 h/w computes and verifies the Header and
+	  Data digest of the PDUs.
+
+	- Direct Data Placement (DDP)
+
+	  S3 h/w can directly place the iSCSI Data-In or Data-Out PDU's
+	  payload into pre-posted final destination host-memory buffers based
+	  on the Initiator Task Tag (ITT) in Data-In or Target Task Tag (TTT)
+	  in Data-Out PDUs.
+
+	- PDU Transmit and Recovery
+
+	  On transmitting, S3 h/w accepts the complete PDU (header + data)
+	  from the host driver, computes and inserts the digests, decomposes
+	  the PDU into multiple TCP segments if necessary, and transmit all
+	  the TCP segments onto the wire. It handles TCP retransmission if
+	  needed.
+
+	  On receiving, S3 h/w recovers the iSCSI PDU by reassembling TCP
+	  segments, separating the header and data, calculating and verifying
+	  the digests, then forwarding the header to the host. The payload data,
+	  if possible, will be directly placed into the pre-posted host DDP
+	  buffer. Otherwise, the payload data will be sent to the host too.
+
+The cxgb3i driver interfaces with open-iscsi initiator and provides the iSCSI
+acceleration through Chelsio hardware wherever applicable.
+
+Using the cxgb3i Driver
+=======================
+
+The following steps need to be taken to accelerates the open-iscsi initiator:
+
+1. Load the cxgb3i driver: "modprobe cxgb3i"
+
+   The cxgb3i module registers a new transport class "cxgb3i" with open-iscsi.
+
+   * in the case of recompiling the kernel, the cxgb3i selection is located at::
+
+	Device Drivers
+		SCSI device support --->
+			[*] SCSI low-level drivers  --->
+				<M>   Chelsio S3xx iSCSI support
+
+2. Create an interface file located under /etc/iscsi/ifaces/ for the new
+   transport class "cxgb3i".
+
+   The content of the file should be in the following format::
+
+	iface.transport_name = cxgb3i
+	iface.net_ifacename = <ethX>
+	iface.ipaddress = <iscsi ip address>
+
+   * if iface.ipaddress is specified, <iscsi ip address> needs to be either the
+     same as the ethX's ip address or an address on the same subnet. Make
+     sure the ip address is unique in the network.
+
+3. edit /etc/iscsi/iscsid.conf
+   The default setting for MaxRecvDataSegmentLength (131072) is too big;
+   replace with a value no bigger than 15360 (for example 8192)::
+
+	node.conn[0].iscsi.MaxRecvDataSegmentLength = 8192
+
+   * The login would fail for a normal session if MaxRecvDataSegmentLength is
+     too big.  A error message in the format of
+     "cxgb3i: ERR! MaxRecvSegmentLength <X> too big. Need to be <= <Y>."
+     would be logged to dmesg.
+
+4. To direct open-iscsi traffic to go through cxgb3i's accelerated path,
+   "-I <iface file name>" option needs to be specified with most of the
+   iscsiadm command. <iface file name> is the transport interface file created
+   in step 2.
diff --git a/Documentation/scsi/cxgb3i.txt b/Documentation/scsi/cxgb3i.txt
deleted file mode 100644
index 7ac8032..0000000
--- a/Documentation/scsi/cxgb3i.txt
+++ /dev/null
@@ -1,84 +0,0 @@
-Chelsio S3 iSCSI Driver for Linux
-
-Introduction
-============
-
-The Chelsio T3 ASIC based Adapters (S310, S320, S302, S304, Mezz cards, etc.
-series of products) support iSCSI acceleration and iSCSI Direct Data Placement
-(DDP) where the hardware handles the expensive byte touching operations, such
-as CRC computation and verification, and direct DMA to the final host memory
-destination:
-
-	- iSCSI PDU digest generation and verification
-
-	  On transmitting, Chelsio S3 h/w computes and inserts the Header and
-	  Data digest into the PDUs.
-	  On receiving, Chelsio S3 h/w computes and verifies the Header and
-	  Data digest of the PDUs.
-
-	- Direct Data Placement (DDP)
-
-	  S3 h/w can directly place the iSCSI Data-In or Data-Out PDU's
-	  payload into pre-posted final destination host-memory buffers based
-	  on the Initiator Task Tag (ITT) in Data-In or Target Task Tag (TTT)
-	  in Data-Out PDUs.
-
-	- PDU Transmit and Recovery
-
-	  On transmitting, S3 h/w accepts the complete PDU (header + data)
-	  from the host driver, computes and inserts the digests, decomposes
-	  the PDU into multiple TCP segments if necessary, and transmit all
-	  the TCP segments onto the wire. It handles TCP retransmission if
-	  needed.
-
-	  On receiving, S3 h/w recovers the iSCSI PDU by reassembling TCP
-	  segments, separating the header and data, calculating and verifying
-	  the digests, then forwarding the header to the host. The payload data,
-	  if possible, will be directly placed into the pre-posted host DDP
-	  buffer. Otherwise, the payload data will be sent to the host too.
-
-The cxgb3i driver interfaces with open-iscsi initiator and provides the iSCSI
-acceleration through Chelsio hardware wherever applicable.
-
-Using the cxgb3i Driver
-=======================
-
-The following steps need to be taken to accelerates the open-iscsi initiator:
-
-1. Load the cxgb3i driver: "modprobe cxgb3i"
-
-   The cxgb3i module registers a new transport class "cxgb3i" with open-iscsi.
-
-   * in the case of recompiling the kernel, the cxgb3i selection is located at
-	Device Drivers
-		SCSI device support --->
-			[*] SCSI low-level drivers  --->
-				<M>   Chelsio S3xx iSCSI support
-
-2. Create an interface file located under /etc/iscsi/ifaces/ for the new
-   transport class "cxgb3i".
-
-   The content of the file should be in the following format:
-	iface.transport_name = cxgb3i
-	iface.net_ifacename = <ethX>
-	iface.ipaddress = <iscsi ip address>
-
-   * if iface.ipaddress is specified, <iscsi ip address> needs to be either the
-	same as the ethX's ip address or an address on the same subnet. Make
-	sure the ip address is unique in the network.
-
-3. edit /etc/iscsi/iscsid.conf
-   The default setting for MaxRecvDataSegmentLength (131072) is too big;
-   replace with a value no bigger than 15360 (for example 8192):
-
-	node.conn[0].iscsi.MaxRecvDataSegmentLength = 8192
-
-   * The login would fail for a normal session if MaxRecvDataSegmentLength is
-	too big.  A error message in the format of
-	"cxgb3i: ERR! MaxRecvSegmentLength <X> too big. Need to be <= <Y>."
-	would be logged to dmesg.
-
-4. To direct open-iscsi traffic to go through cxgb3i's accelerated path,
-   "-I <iface file name>" option needs to be specified with most of the
-   iscsiadm command. <iface file name> is the transport interface file created
-   in step 2.
diff --git a/Documentation/scsi/dc395x.rst b/Documentation/scsi/dc395x.rst
new file mode 100644
index 0000000..d779e78
--- /dev/null
+++ b/Documentation/scsi/dc395x.rst
@@ -0,0 +1,117 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+======================================
+README file for the dc395x SCSI driver
+======================================
+
+Status
+------
+The driver has been tested with CD-R and CD-R/W drives. These should
+be safe to use. Testing with hard disks has not been done to any
+great degree and caution should be exercised if you want to attempt
+to use this driver with hard disks.
+
+This is a 2.5 only driver. For a 2.4 driver please see the original
+driver (which this driver started from) at
+http://www.garloff.de/kurt/linux/dc395/
+
+Problems, questions and patches should be submitted to the mailing
+list. Details on the list, including archives, are available at
+http://lists.twibble.org/mailman/listinfo/dc395x/
+
+Parameters
+----------
+The driver uses the settings from the EEPROM set in the SCSI BIOS
+setup. If there is no EEPROM, the driver uses default values.
+Both can be overridden by command line parameters (module or kernel
+parameters).
+
+The following parameters are available:
+
+safe
+   Default: 0, Acceptable values: 0 or 1
+
+   If safe is set to 1 then the adapter will use conservative
+   ("safe") default settings. This sets:
+
+		shortcut for dc395x=7,4,9,15,2,10
+
+adapter_id
+   Default: 7, Acceptable values: 0 to 15
+
+   Sets the host adapter SCSI ID.
+
+max_speed
+   Default: 1, Acceptable value: 0 to 7
+
+   ==  ========
+   0   20   Mhz
+   1   12.2 Mhz
+   2   10   Mhz
+   3   8    Mhz
+   4   6.7  Mhz
+   5   5.8  Hhz
+   6   5    Mhz
+   7   4    Mhz
+   ==  ========
+
+dev_mode
+   Bitmap for device configuration
+
+   DevMode bit definition:
+
+      === ======== ========  =========================================
+      Bit Val(hex) Val(dec)  Meaning
+      === ======== ========  =========================================
+       0    0x01       1     Parity check
+       1    0x02       2     Synchronous Negotiation
+       2    0x04       4     Disconnection
+       3    0x08       8     Send Start command on startup. (Not used)
+       4    0x10      16     Tagged Command Queueing
+       5    0x20      32     Wide Negotiation
+      === ======== ========  =========================================
+
+adapter_mode
+   Bitmap for adapter configuration
+
+   AdaptMode bit definition
+
+    ===== ======== ========  ====================================================
+      Bit Val(hex) Val(dec)  Meaning
+    ===== ======== ========  ====================================================
+       0    0x01       1     Support more than two drives. (Not used)
+       1    0x02       2     Use DOS compatible mapping for HDs greater than 1GB.
+       2    0x04       4     Reset SCSI Bus on startup.
+       3    0x08       8     Active Negation: Improves SCSI Bus noise immunity.
+       4    0x10      16     Immediate return on BIOS seek command. (Not used)
+    (*)5    0x20      32     Check for LUNs >= 1.
+    ===== ======== ========  ====================================================
+
+tags
+   Default: 3, Acceptable values: 0-5
+
+   The number of tags is 1<<x, if x has been specified
+
+reset_delay
+   Default: 1, Acceptable values: 0-180
+
+   The seconds to not accept commands after a SCSI Reset
+
+
+For the built  in driver the parameters should be prefixed with
+dc395x. (eg "dc395x.safe=1")
+
+
+Copyright
+---------
+The driver is free software. It is protected by the GNU General Public
+License (GPL). Please read it, before using this driver. It should be
+included in your kernel sources and with your distribution. It carries the
+filename COPYING. If you don't have it, please ask me to send you one by
+email.
+
+Note: The GNU GPL says also something about warranty and liability.
+Please be aware the following: While we do my best to provide a working and
+reliable driver, there is a chance, that it will kill your valuable data.
+We refuse to take any responsibility for that. The driver is provided as-is
+and YOU USE IT AT YOUR OWN RESPONSIBILITY.
diff --git a/Documentation/scsi/dc395x.txt b/Documentation/scsi/dc395x.txt
deleted file mode 100644
index 88219f9..0000000
--- a/Documentation/scsi/dc395x.txt
+++ /dev/null
@@ -1,102 +0,0 @@
-README file for the dc395x SCSI driver
-==========================================
-
-Status
-------
-The driver has been tested with CD-R and CD-R/W drives. These should
-be safe to use. Testing with hard disks has not been done to any
-great degree and caution should be exercised if you want to attempt
-to use this driver with hard disks.
-
-This is a 2.5 only driver. For a 2.4 driver please see the original
-driver (which this driver started from) at
-http://www.garloff.de/kurt/linux/dc395/
-
-Problems, questions and patches should be submitted to the mailing
-list. Details on the list, including archives, are available at
-http://lists.twibble.org/mailman/listinfo/dc395x/
-
-Parameters
-----------
-The driver uses the settings from the EEPROM set in the SCSI BIOS 
-setup. If there is no EEPROM, the driver uses default values.
-Both can be overridden by command line parameters (module or kernel
-parameters).
-
-The following parameters are available:
-
- - safe
-   Default: 0, Acceptable values: 0 or 1
-
-   If safe is set to 1 then the adapter will use conservative
-   ("safe") default settings. This sets:
-
-		shortcut for dc395x=7,4,9,15,2,10
-
- - adapter_id
-   Default: 7, Acceptable values: 0 to 15
-
-   Sets the host adapter SCSI ID.
-
- - max_speed
-   Default: 1, Acceptable value: 0 to 7
-   0 = 20   Mhz
-   1 = 12.2 Mhz
-   2 = 10   Mhz
-   3 = 8    Mhz
-   4 = 6.7  Mhz
-   5 = 5.8  Hhz
-   6 = 5    Mhz
-   7 = 4    Mhz
-
- - dev_mode
-   Bitmap for device configuration
-
-   DevMode bit definition:
-      Bit Val(hex) Val(dec)  Meaning
-      *0    0x01       1     Parity check
-      *1    0x02       2     Synchronous Negotiation
-      *2    0x04       4     Disconnection
-      *3    0x08       8     Send Start command on startup. (Not used)
-      *4    0x10      16     Tagged Command Queueing
-      *5    0x20      32     Wide Negotiation
-
- - adapter_mode
-   Bitmap for adapter configuration
-
-   AdaptMode bit definition
-      Bit Val(hex) Val(dec)  Meaning
-      *0    0x01       1     Support more than two drives. (Not used)
-      *1    0x02       2     Use DOS compatible mapping for HDs greater than 1GB.
-      *2    0x04       4     Reset SCSI Bus on startup.
-      *3    0x08       8     Active Negation: Improves SCSI Bus noise immunity.
-       4    0x10      16     Immediate return on BIOS seek command. (Not used)
-    (*)5    0x20      32     Check for LUNs >= 1.
-
- - tags
-   Default: 3, Acceptable values: 0-5
-   
-   The number of tags is 1<<x, if x has been specified
-
- - reset_delay
-   Default: 1, Acceptable values: 0-180
-
-   The seconds to not accept commands after a SCSI Reset
-
-
-For the built  in driver the parameters should be prefixed with
-dc395x. (eg "dc395x.safe=1")
-
-
-Copyright
----------
-The driver is free software. It is protected by the GNU General Public
-License (GPL). Please read it, before using this driver. It should be
-included in your kernel sources and with your distribution. It carries the
-filename COPYING. If you don't have it, please ask me to send you one by
-email.
-Note: The GNU GPL says also something about warranty and liability. 
-Please be aware the following: While we do my best to provide a working and
-reliable driver, there is a chance, that it will kill your valuable data. 
-We refuse to take any responsibility for that. The driver is provided as-is
-and YOU USE IT AT YOUR OWN RESPONSIBILITY.
diff --git a/Documentation/scsi/dpti.rst b/Documentation/scsi/dpti.rst
new file mode 100644
index 0000000..0496919
--- /dev/null
+++ b/Documentation/scsi/dpti.rst
@@ -0,0 +1,92 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===================
+Adaptec dpti driver
+===================
+
+Redistribution and use in source form, with or without modification, are
+permitted provided that redistributions of source code must retain the
+above copyright notice, this list of conditions and the following disclaimer.
+
+This software is provided ``as is`` by Adaptec and
+any express or implied warranties, including, but not limited to, the
+implied warranties of merchantability and fitness for a particular purpose,
+are disclaimed. In no event shall Adaptec be
+liable for any direct, indirect, incidental, special, exemplary or
+consequential damages (including, but not limited to, procurement of
+substitute goods or services; loss of use, data, or profits; or business
+interruptions) however caused and on any theory of liability, whether in
+contract, strict liability, or tort (including negligence or otherwise)
+arising in any way out of the use of this driver software, even if advised
+of the possibility of such damage.
+
+This driver supports the Adaptec I2O RAID and DPT SmartRAID V I2O boards.
+
+Credits
+=======
+
+The original linux driver was ported to Linux by Karen White while at
+Dell Computer.  It was ported from Bob Pasteur's (of DPT) original
+non-Linux driver.  Mark Salyzyn and Bob Pasteur consulted on the original
+driver.
+
+2.0 version of the driver by Deanna Bonds and Mark Salyzyn.
+
+History
+=======
+
+The driver was originally ported to linux version 2.0.34
+
+==== ==========================================================================
+V2.0 Rewrite of driver.  Re-architectured based on i2o subsystem.
+     This was the first full GPL version since the last version used
+     i2osig headers which were not GPL.  Developer Testing version.
+V2.1 Internal testing
+V2.2 First released version
+
+V2.3 Changes:
+
+     - Added Raptor Support
+     - Fixed bug causing system to hang under extreme load with
+     - management utilities running (removed GFP_DMA from kmalloc flags)
+
+V2.4 First version ready to be submitted to be embedded in the kernel
+
+     Changes:
+
+     - Implemented suggestions from Alan Cox
+     - Added calculation of resid for sg layer
+     - Better error handling
+     - Added checking underflow conditions
+     - Added DATAPROTECT checking
+     - Changed error return codes
+     - Fixed pointer bug in bus reset routine
+     - Enabled hba reset from ioctls (allows a FW flash to reboot and use
+       the new FW without having to reboot)
+     - Changed proc output
+==== ==========================================================================
+
+TODO
+====
+- Add 64 bit Scatter Gather when compiled on 64 bit architectures
+- Add sparse lun scanning
+- Add code that checks if a device that had been taken offline is
+  now online (at the FW level) when test unit ready or inquiry
+  command from scsi-core
+- Add proc read interface
+- busrescan command
+- rescan command
+- Add code to rescan routine that notifies scsi-core about new devices
+- Add support for C-PCI (hotplug stuff)
+- Add ioctl passthru error recovery
+
+Notes
+=====
+The DPT card optimizes the order of processing commands.  Consequently,
+a command may take up to 6 minutes to complete after it has been sent
+to the board.
+
+The files dpti_ioctl.h dptsig.h osd_defs.h osd_util.h sys_info.h are part of the
+interface files for Adaptec's management routines.  These define the structures used
+in the ioctls.  They are written to be portable.  They are hard to read, but I need
+to use them 'as is' or I can miss changes in the interface.
diff --git a/Documentation/scsi/dpti.txt b/Documentation/scsi/dpti.txt
deleted file mode 100644
index f36dc0e..0000000
--- a/Documentation/scsi/dpti.txt
+++ /dev/null
@@ -1,83 +0,0 @@
- /* TERMS AND CONDITIONS OF USE
- * 
- * Redistribution and use in source form, with or without modification, are
- * permitted provided that redistributions of source code must retain the
- * above copyright notice, this list of conditions and the following disclaimer.
- * 
- * This software is provided `as is' by Adaptec and
- * any express or implied warranties, including, but not limited to, the
- * implied warranties of merchantability and fitness for a particular purpose,
- * are disclaimed. In no event shall Adaptec be
- * liable for any direct, indirect, incidental, special, exemplary or
- * consequential damages (including, but not limited to, procurement of
- * substitute goods or services; loss of use, data, or profits; or business
- * interruptions) however caused and on any theory of liability, whether in
- * contract, strict liability, or tort (including negligence or otherwise)
- * arising in any way out of the use of this driver software, even if advised
- * of the possibility of such damage.
- * 
- ****************************************************************
- * This driver supports the Adaptec I2O RAID and DPT SmartRAID V I2O boards.
- *
- * CREDITS:
- * The original linux driver was ported to Linux by Karen White while at 
- * Dell Computer.  It was ported from Bob Pasteur's (of DPT) original 
- * non-Linux driver.  Mark Salyzyn and Bob Pasteur consulted on the original
- * driver. 
- * 
- * 2.0 version of the driver by Deanna Bonds and Mark Salyzyn.
- *
- * HISTORY:
- * The driver was originally ported to linux version 2.0.34 
- *
- * V2.0 Rewrite of driver.  Re-architectured based on i2o subsystem.
- *   This was the first full GPL version since the last version used
- *   i2osig headers which were not GPL.  Developer Testing version.
- * V2.1 Internal testing
- * V2.2 First released version
- *
- * V2.3 
- *   Changes:
- *      Added Raptor Support
- *      Fixed bug causing system to hang under extreme load with 
- *         management utilities running (removed GFP_DMA from kmalloc flags)
- *
- *
- * V2.4 First version ready to be submitted to be embedded in the kernel
- *   Changes: 
- *      Implemented suggestions from Alan Cox
- *      Added calculation of resid for sg layer
- *      Better error handling
- *         Added checking underflow conditions 
- *         Added DATAPROTECT checking
- *         Changed error return codes
- *         Fixed pointer bug in bus reset routine
- *      Enabled hba reset from ioctls (allows a FW flash to reboot and use the new
- *         FW without having to reboot)
- *      Changed proc output
- *
- * TODO:
- *      Add 64 bit Scatter Gather when compiled on 64 bit architectures
- *      Add sparse lun scanning 
- *      Add code that checks if a device that had been taken offline is
- *         now online (at the FW level) when test unit ready or inquiry 
- *         command from scsi-core
- *      Add proc read interface
- *         busrescan command
- *         rescan command
- *      Add code to rescan routine that notifies scsi-core about new devices
- *      Add support for C-PCI (hotplug stuff)
- *      Add ioctl passthru error recovery
- *
- * NOTES:
- * The DPT card optimizes the order of processing commands.  Consequently,
- * a command may take up to 6 minutes to complete after it has been sent
- * to the board.  
- *
- * The files dpti_ioctl.h dptsig.h osd_defs.h osd_util.h sys_info.h are part of the
- * interface files for Adaptec's management routines.  These define the structures used
- * in the ioctls.  They are written to be portable.  They are hard to read, but I need
- * to use them 'as is' or I can miss changes in the interface.
- *
- */
-
diff --git a/Documentation/scsi/g_NCR5380.rst b/Documentation/scsi/g_NCR5380.rst
new file mode 100644
index 0000000..a282059
--- /dev/null
+++ b/Documentation/scsi/g_NCR5380.rst
@@ -0,0 +1,93 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: <isonum.txt>
+
+==========================================
+README file for the Linux g_NCR5380 driver
+==========================================
+
+Copyright |copy| 1993 Drew Eckhard
+
+NCR53c400 extensions Copyright |copy| 1994,1995,1996 Kevin Lentin
+
+This file documents the NCR53c400 extensions by Kevin Lentin and some
+enhancements to the NCR5380 core.
+
+This driver supports NCR5380 and NCR53c400 and compatible cards in port or
+memory mapped modes.
+
+Use of an interrupt is recommended, if supported by the board, as this will
+allow targets to disconnect and thereby improve SCSI bus utilization.
+
+If the irq parameter is 254 or is omitted entirely, the driver will probe
+for the correct IRQ line automatically. If the irq parameter is 0 or 255
+then no IRQ will be used.
+
+The NCR53c400 does not support DMA but it does have Pseudo-DMA which is
+supported by the driver.
+
+This driver provides some information on what it has detected in
+/proc/scsi/g_NCR5380/x where x is the scsi card number as detected at boot
+time. More info to come in the future.
+
+This driver works as a module.
+When included as a module, parameters can be passed on the insmod/modprobe
+command line:
+
+  ============= ===============================================================
+  irq=xx[,...]	the interrupt(s)
+  base=xx[,...]	the port or base address(es) (for port or memory mapped, resp.)
+  card=xx[,...]	card type(s):
+
+		==  ======================================
+		0   NCR5380,
+		1   NCR53C400,
+		2   NCR53C400A,
+		3   Domex Technology Corp 3181E (DTC3181E)
+		4   Hewlett Packard C2502
+		==  ======================================
+  ============= ===============================================================
+
+These old-style parameters can support only one card:
+
+  ============= =================================================
+  ncr_irq=xx    the interrupt
+  ncr_addr=xx   the port or base address (for port or memory
+                mapped, resp.)
+  ncr_5380=1    to set up for a NCR5380 board
+  ncr_53c400=1  to set up for a NCR53C400 board
+  ncr_53c400a=1 to set up for a NCR53C400A board
+  dtc_3181e=1   to set up for a Domex Technology Corp 3181E board
+  hp_c2502=1    to set up for a Hewlett Packard C2502 board
+  ============= =================================================
+
+E.g. Trantor T130B in its default configuration::
+
+	modprobe g_NCR5380 irq=5 base=0x350 card=1
+
+or alternatively, using the old syntax::
+
+	modprobe g_NCR5380 ncr_irq=5 ncr_addr=0x350 ncr_53c400=1
+
+E.g. a port mapped NCR5380 board, driver to probe for IRQ::
+
+	modprobe g_NCR5380 base=0x350 card=0
+
+or alternatively::
+
+	modprobe g_NCR5380 ncr_addr=0x350 ncr_5380=1
+
+E.g. a memory mapped NCR53C400 board with no IRQ::
+
+	modprobe g_NCR5380 irq=255 base=0xc8000 card=1
+
+or alternatively::
+
+	modprobe g_NCR5380 ncr_irq=255 ncr_addr=0xc8000 ncr_53c400=1
+
+E.g. two cards, DTC3181 (in non-PnP mode) at 0x240 with no IRQ
+and HP C2502 at 0x300 with IRQ 7::
+
+	modprobe g_NCR5380 irq=0,7 base=0x240,0x300 card=3,4
+
+Kevin Lentin
+K.Lentin@cs.monash.edu.au
diff --git a/Documentation/scsi/g_NCR5380.txt b/Documentation/scsi/g_NCR5380.txt
deleted file mode 100644
index 37b1967..0000000
--- a/Documentation/scsi/g_NCR5380.txt
+++ /dev/null
@@ -1,68 +0,0 @@
-README file for the Linux g_NCR5380 driver.
-
-(c) 1993 Drew Eckhard
-NCR53c400 extensions (c) 1994,1995,1996 Kevin Lentin
-
-This file documents the NCR53c400 extensions by Kevin Lentin and some
-enhancements to the NCR5380 core.
-
-This driver supports NCR5380 and NCR53c400 and compatible cards in port or
-memory mapped modes.
-
-Use of an interrupt is recommended, if supported by the board, as this will
-allow targets to disconnect and thereby improve SCSI bus utilization.
-
-If the irq parameter is 254 or is omitted entirely, the driver will probe
-for the correct IRQ line automatically. If the irq parameter is 0 or 255
-then no IRQ will be used.
-
-The NCR53c400 does not support DMA but it does have Pseudo-DMA which is
-supported by the driver.
-
-This driver provides some information on what it has detected in
-/proc/scsi/g_NCR5380/x where x is the scsi card number as detected at boot
-time. More info to come in the future.
-
-This driver works as a module.
-When included as a module, parameters can be passed on the insmod/modprobe
-command line:
-  irq=xx[,...]	the interrupt(s)
-  base=xx[,...]	the port or base address(es) (for port or memory mapped, resp.)
-  card=xx[,...]	card type(s):
-		0 = NCR5380,
-		1 = NCR53C400,
-		2 = NCR53C400A,
-		3 = Domex Technology Corp 3181E (DTC3181E)
-		4 = Hewlett Packard C2502
-
-These old-style parameters can support only one card:
-  ncr_irq=xx   the interrupt
-  ncr_addr=xx  the port or base address (for port or memory
-               mapped, resp.)
-  ncr_5380=1   to set up for a NCR5380 board
-  ncr_53c400=1 to set up for a NCR53C400 board
-  ncr_53c400a=1 to set up for a NCR53C400A board
-  dtc_3181e=1  to set up for a Domex Technology Corp 3181E board
-  hp_c2502=1   to set up for a Hewlett Packard C2502 board
-
-E.g. Trantor T130B in its default configuration:
-modprobe g_NCR5380 irq=5 base=0x350 card=1
-or alternatively, using the old syntax,
-modprobe g_NCR5380 ncr_irq=5 ncr_addr=0x350 ncr_53c400=1
-
-E.g. a port mapped NCR5380 board, driver to probe for IRQ:
-modprobe g_NCR5380 base=0x350 card=0
-or alternatively,
-modprobe g_NCR5380 ncr_addr=0x350 ncr_5380=1
-
-E.g. a memory mapped NCR53C400 board with no IRQ:
-modprobe g_NCR5380 irq=255 base=0xc8000 card=1
-or alternatively,
-modprobe g_NCR5380 ncr_irq=255 ncr_addr=0xc8000 ncr_53c400=1
-
-E.g. two cards, DTC3181 (in non-PnP mode) at 0x240 with no IRQ
-and HP C2502 at 0x300 with IRQ 7:
-modprobe g_NCR5380 irq=0,7 base=0x240,0x300 card=3,4
-
-Kevin Lentin
-K.Lentin@cs.monash.edu.au
diff --git a/Documentation/scsi/hpsa.rst b/Documentation/scsi/hpsa.rst
new file mode 100644
index 0000000..340e10c
--- /dev/null
+++ b/Documentation/scsi/hpsa.rst
@@ -0,0 +1,129 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================================
+HPSA - Hewlett Packard Smart Array driver
+=========================================
+
+This file describes the hpsa SCSI driver for HP Smart Array controllers.
+The hpsa driver is intended to supplant the cciss driver for newer
+Smart Array controllers.  The hpsa driver is a SCSI driver, while the
+cciss driver is a "block" driver.  Actually cciss is both a block
+driver (for logical drives) AND a SCSI driver (for tape drives). This
+"split-brained" design of the cciss driver is a source of excess
+complexity and eliminating that complexity is one of the reasons
+for hpsa to exist.
+
+Supported devices
+=================
+
+- Smart Array P212
+- Smart Array P410
+- Smart Array P410i
+- Smart Array P411
+- Smart Array P812
+- Smart Array P712m
+- Smart Array P711m
+- StorageWorks P1210m
+
+Additionally, older Smart Arrays may work with the hpsa driver if the kernel
+boot parameter "hpsa_allow_any=1" is specified, however these are not tested
+nor supported by HP with this driver.  For older Smart Arrays, the cciss
+driver should still be used.
+
+The "hpsa_simple_mode=1" boot parameter may be used to prevent the driver from
+putting the controller into "performant" mode.  The difference is that with simple
+mode, each command completion requires an interrupt, while with "performant mode"
+(the default, and ordinarily better performing) it is possible to have multiple
+command completions indicated by a single interrupt.
+
+HPSA specific entries in /sys
+=============================
+
+  In addition to the generic SCSI attributes available in /sys, hpsa supports
+  the following attributes:
+
+HPSA specific host attributes
+=============================
+
+  ::
+
+    /sys/class/scsi_host/host*/rescan
+    /sys/class/scsi_host/host*/firmware_revision
+    /sys/class/scsi_host/host*/resettable
+    /sys/class/scsi_host/host*/transport_mode
+
+  the host "rescan" attribute is a write only attribute.  Writing to this
+  attribute will cause the driver to scan for new, changed, or removed devices
+  (e.g. hot-plugged tape drives, or newly configured or deleted logical drives,
+  etc.) and notify the SCSI midlayer of any changes detected.  Normally this is
+  triggered automatically by HP's Array Configuration Utility (either the GUI or
+  command line variety) so for logical drive changes, the user should not
+  normally have to use this.  It may be useful when hot plugging devices like
+  tape drives, or entire storage boxes containing pre-configured logical drives.
+
+  The "firmware_revision" attribute contains the firmware version of the Smart Array.
+  For example::
+
+	root@host:/sys/class/scsi_host/host4# cat firmware_revision
+	7.14
+
+  The transport_mode indicates whether the controller is in "performant"
+  or "simple" mode.  This is controlled by the "hpsa_simple_mode" module
+  parameter.
+
+  The "resettable" read-only attribute indicates whether a particular
+  controller is able to honor the "reset_devices" kernel parameter.  If the
+  device is resettable, this file will contain a "1", otherwise, a "0".  This
+  parameter is used by kdump, for example, to reset the controller at driver
+  load time to eliminate any outstanding commands on the controller and get the
+  controller into a known state so that the kdump initiated i/o will work right
+  and not be disrupted in any way by stale commands or other stale state
+  remaining on the controller from the previous kernel.  This attribute enables
+  kexec tools to warn the user if they attempt to designate a device which is
+  unable to honor the reset_devices kernel parameter as a dump device.
+
+HPSA specific disk attributes
+-----------------------------
+
+  ::
+
+    /sys/class/scsi_disk/c:b:t:l/device/unique_id
+    /sys/class/scsi_disk/c:b:t:l/device/raid_level
+    /sys/class/scsi_disk/c:b:t:l/device/lunid
+
+  (where c:b:t:l are the controller, bus, target and lun of the device)
+
+  For example::
+
+	root@host:/sys/class/scsi_disk/4:0:0:0/device# cat unique_id
+	600508B1001044395355323037570F77
+	root@host:/sys/class/scsi_disk/4:0:0:0/device# cat lunid
+	0x0000004000000000
+	root@host:/sys/class/scsi_disk/4:0:0:0/device# cat raid_level
+	RAID 0
+
+HPSA specific ioctls
+====================
+
+  For compatibility with applications written for the cciss driver, many, but
+  not all of the ioctls supported by the cciss driver are also supported by the
+  hpsa driver.  The data structures used by these are described in
+  include/linux/cciss_ioctl.h
+
+  CCISS_DEREGDISK, CCISS_REGNEWDISK, CCISS_REGNEWD
+	The above three ioctls all do exactly the same thing, which is to cause the driver
+	to rescan for new devices.  This does exactly the same thing as writing to the
+	hpsa specific host "rescan" attribute.
+
+  CCISS_GETPCIINFO
+	Returns PCI domain, bus, device and function and "board ID" (PCI subsystem ID).
+
+  CCISS_GETDRIVVER
+	Returns driver version in three bytes encoded as::
+
+		(major_version << 16) | (minor_version << 8) | (subminor_version)
+
+  CCISS_PASSTHRU, CCISS_BIG_PASSTHRU
+	Allows "BMIC" and "CISS" commands to be passed through to the Smart Array.
+	These are used extensively by the HP Array Configuration Utility, SNMP storage
+	agents, etc.  See cciss_vol_status at http://cciss.sf.net for some examples.
diff --git a/Documentation/scsi/hpsa.txt b/Documentation/scsi/hpsa.txt
deleted file mode 100644
index 891435a..0000000
--- a/Documentation/scsi/hpsa.txt
+++ /dev/null
@@ -1,130 +0,0 @@
-
-HPSA - Hewlett Packard Smart Array driver
------------------------------------------
-
-This file describes the hpsa SCSI driver for HP Smart Array controllers.
-The hpsa driver is intended to supplant the cciss driver for newer
-Smart Array controllers.  The hpsa driver is a SCSI driver, while the
-cciss driver is a "block" driver.  Actually cciss is both a block
-driver (for logical drives) AND a SCSI driver (for tape drives). This
-"split-brained" design of the cciss driver is a source of excess
-complexity and eliminating that complexity is one of the reasons
-for hpsa to exist.
-
-Supported devices:
-------------------
-
-Smart Array P212
-Smart Array P410
-Smart Array P410i
-Smart Array P411
-Smart Array P812
-Smart Array P712m
-Smart Array P711m
-StorageWorks P1210m
-
-Additionally, older Smart Arrays may work with the hpsa driver if the kernel
-boot parameter "hpsa_allow_any=1" is specified, however these are not tested
-nor supported by HP with this driver.  For older Smart Arrays, the cciss
-driver should still be used.
-
-The "hpsa_simple_mode=1" boot parameter may be used to prevent the driver from
-putting the controller into "performant" mode.  The difference is that with simple
-mode, each command completion requires an interrupt, while with "performant mode"
-(the default, and ordinarily better performing) it is possible to have multiple
-command completions indicated by a single interrupt.
-
-HPSA specific entries in /sys
------------------------------
-
-  In addition to the generic SCSI attributes available in /sys, hpsa supports
-  the following attributes:
-
-  HPSA specific host attributes:
-  ------------------------------
-
-  /sys/class/scsi_host/host*/rescan
-  /sys/class/scsi_host/host*/firmware_revision
-  /sys/class/scsi_host/host*/resettable
-  /sys/class/scsi_host/host*/transport_mode
-
-  the host "rescan" attribute is a write only attribute.  Writing to this
-  attribute will cause the driver to scan for new, changed, or removed devices
-  (e.g. hot-plugged tape drives, or newly configured or deleted logical drives,
-  etc.) and notify the SCSI midlayer of any changes detected.  Normally this is
-  triggered automatically by HP's Array Configuration Utility (either the GUI or
-  command line variety) so for logical drive changes, the user should not
-  normally have to use this.  It may be useful when hot plugging devices like
-  tape drives, or entire storage boxes containing pre-configured logical drives.
-
-  The "firmware_revision" attribute contains the firmware version of the Smart Array.
-  For example:
-
-	root@host:/sys/class/scsi_host/host4# cat firmware_revision
-	7.14
-
-  The transport_mode indicates whether the controller is in "performant"
-  or "simple" mode.  This is controlled by the "hpsa_simple_mode" module
-  parameter.
-
-  The "resettable" read-only attribute indicates whether a particular
-  controller is able to honor the "reset_devices" kernel parameter.  If the
-  device is resettable, this file will contain a "1", otherwise, a "0".  This
-  parameter is used by kdump, for example, to reset the controller at driver
-  load time to eliminate any outstanding commands on the controller and get the
-  controller into a known state so that the kdump initiated i/o will work right
-  and not be disrupted in any way by stale commands or other stale state
-  remaining on the controller from the previous kernel.  This attribute enables
-  kexec tools to warn the user if they attempt to designate a device which is
-  unable to honor the reset_devices kernel parameter as a dump device.
-
-  HPSA specific disk attributes:
-  ------------------------------
-
-  /sys/class/scsi_disk/c:b:t:l/device/unique_id
-  /sys/class/scsi_disk/c:b:t:l/device/raid_level
-  /sys/class/scsi_disk/c:b:t:l/device/lunid
-
-  (where c:b:t:l are the controller, bus, target and lun of the device)
-
-  For example:
-
-	root@host:/sys/class/scsi_disk/4:0:0:0/device# cat unique_id
-	600508B1001044395355323037570F77
-	root@host:/sys/class/scsi_disk/4:0:0:0/device# cat lunid
-	0x0000004000000000
-	root@host:/sys/class/scsi_disk/4:0:0:0/device# cat raid_level
-	RAID 0
-
-HPSA specific ioctls:
----------------------
-
-  For compatibility with applications written for the cciss driver, many, but
-  not all of the ioctls supported by the cciss driver are also supported by the
-  hpsa driver.  The data structures used by these are described in
-  include/linux/cciss_ioctl.h
-
-  CCISS_DEREGDISK
-  CCISS_REGNEWDISK
-  CCISS_REGNEWD
-
-  The above three ioctls all do exactly the same thing, which is to cause the driver
-  to rescan for new devices.  This does exactly the same thing as writing to the
-  hpsa specific host "rescan" attribute.
-
-  CCISS_GETPCIINFO
-
-	Returns PCI domain, bus, device and function and "board ID" (PCI subsystem ID).
-
-  CCISS_GETDRIVVER
-
-	Returns driver version in three bytes encoded as:
-		(major_version << 16) | (minor_version << 8) | (subminor_version)
-
-  CCISS_PASSTHRU
-  CCISS_BIG_PASSTHRU
-
-	Allows "BMIC" and "CISS" commands to be passed through to the Smart Array.
-	These are used extensively by the HP Array Configuration Utility, SNMP storage
-	agents, etc.  See cciss_vol_status at http://cciss.sf.net for some examples.
-
diff --git a/Documentation/scsi/hptiop.rst b/Documentation/scsi/hptiop.rst
new file mode 100644
index 0000000..23ae7ae
--- /dev/null
+++ b/Documentation/scsi/hptiop.rst
@@ -0,0 +1,215 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: <isonum.txt>
+
+======================================================
+Highpoint RocketRAID 3xxx/4xxx Adapter Driver (hptiop)
+======================================================
+
+Controller Register Map
+-----------------------
+
+For RR44xx Intel IOP based adapters, the controller IOP is accessed via PCI BAR0 and BAR2
+
+     ============== ==================================
+     BAR0 offset    Register
+     ============== ==================================
+            0x11C5C Link Interface IRQ Set
+            0x11C60 Link Interface IRQ Clear
+     ============== ==================================
+
+     ============== ==================================
+     BAR2 offset    Register
+     ============== ==================================
+            0x10    Inbound Message Register 0
+            0x14    Inbound Message Register 1
+            0x18    Outbound Message Register 0
+            0x1C    Outbound Message Register 1
+            0x20    Inbound Doorbell Register
+            0x24    Inbound Interrupt Status Register
+            0x28    Inbound Interrupt Mask Register
+            0x30    Outbound Interrupt Status Register
+            0x34    Outbound Interrupt Mask Register
+            0x40    Inbound Queue Port
+            0x44    Outbound Queue Port
+     ============== ==================================
+
+For Intel IOP based adapters, the controller IOP is accessed via PCI BAR0:
+
+     ============== ==================================
+     BAR0 offset    Register
+     ============== ==================================
+            0x10    Inbound Message Register 0
+            0x14    Inbound Message Register 1
+            0x18    Outbound Message Register 0
+            0x1C    Outbound Message Register 1
+            0x20    Inbound Doorbell Register
+            0x24    Inbound Interrupt Status Register
+            0x28    Inbound Interrupt Mask Register
+            0x30    Outbound Interrupt Status Register
+            0x34    Outbound Interrupt Mask Register
+            0x40    Inbound Queue Port
+            0x44    Outbound Queue Port
+     ============== ==================================
+
+For Marvell not Frey IOP based adapters, the IOP is accessed via PCI BAR0 and BAR1:
+
+     ============== ==================================
+     BAR0 offset    Register
+     ============== ==================================
+         0x20400    Inbound Doorbell Register
+         0x20404    Inbound Interrupt Mask Register
+         0x20408    Outbound Doorbell Register
+         0x2040C    Outbound Interrupt Mask Register
+     ============== ==================================
+
+     ============== ==================================
+     BAR1 offset    Register
+     ============== ==================================
+             0x0    Inbound Queue Head Pointer
+             0x4    Inbound Queue Tail Pointer
+             0x8    Outbound Queue Head Pointer
+             0xC    Outbound Queue Tail Pointer
+            0x10    Inbound Message Register
+            0x14    Outbound Message Register
+     0x40-0x1040    Inbound Queue
+     0x1040-0x2040  Outbound Queue
+     ============== ==================================
+
+For Marvell Frey IOP based adapters, the IOP is accessed via PCI BAR0 and BAR1:
+
+     ============== ==================================
+     BAR0 offset    Register
+     ============== ==================================
+             0x0    IOP configuration information.
+     ============== ==================================
+
+     ============== ===================================================
+     BAR1 offset    Register
+     ============== ===================================================
+          0x4000    Inbound List Base Address Low
+          0x4004    Inbound List Base Address High
+          0x4018    Inbound List Write Pointer
+          0x402C    Inbound List Configuration and Control
+          0x4050    Outbound List Base Address Low
+          0x4054    Outbound List Base Address High
+          0x4058    Outbound List Copy Pointer Shadow Base Address Low
+          0x405C    Outbound List Copy Pointer Shadow Base Address High
+          0x4088    Outbound List Interrupt Cause
+          0x408C    Outbound List Interrupt Enable
+         0x1020C    PCIe Function 0 Interrupt Enable
+         0x10400    PCIe Function 0 to CPU Message A
+         0x10420    CPU to PCIe Function 0 Message A
+         0x10480    CPU to PCIe Function 0 Doorbell
+         0x10484    CPU to PCIe Function 0 Doorbell Enable
+     ============== ===================================================
+
+
+I/O Request Workflow of Not Marvell Frey
+----------------------------------------
+
+All queued requests are handled via inbound/outbound queue port.
+A request packet can be allocated in either IOP or host memory.
+
+To send a request to the controller:
+
+    - Get a free request packet by reading the inbound queue port or
+      allocate a free request in host DMA coherent memory.
+
+      The value returned from the inbound queue port is an offset
+      relative to the IOP BAR0.
+
+      Requests allocated in host memory must be aligned on 32-bytes boundary.
+
+    - Fill the packet.
+
+    - Post the packet to IOP by writing it to inbound queue. For requests
+      allocated in IOP memory, write the offset to inbound queue port. For
+      requests allocated in host memory, write (0x80000000|(bus_addr>>5))
+      to the inbound queue port.
+
+    - The IOP process the request. When the request is completed, it
+      will be put into outbound queue. An outbound interrupt will be
+      generated.
+
+      For requests allocated in IOP memory, the request offset is posted to
+      outbound queue.
+
+      For requests allocated in host memory, (0x80000000|(bus_addr>>5))
+      is posted to the outbound queue. If IOP_REQUEST_FLAG_OUTPUT_CONTEXT
+      flag is set in the request, the low 32-bit context value will be
+      posted instead.
+
+    - The host read the outbound queue and complete the request.
+
+      For requests allocated in IOP memory, the host driver free the request
+      by writing it to the outbound queue.
+
+Non-queued requests (reset/flush etc) can be sent via inbound message
+register 0. An outbound message with the same value indicates the completion
+of an inbound message.
+
+
+I/O Request Workflow of Marvell Frey
+------------------------------------
+
+All queued requests are handled via inbound/outbound list.
+
+To send a request to the controller:
+
+    - Allocate a free request in host DMA coherent memory.
+
+      Requests allocated in host memory must be aligned on 32-bytes boundary.
+
+    - Fill the request with index of the request in the flag.
+
+      Fill a free inbound list unit with the physical address and the size of
+      the request.
+
+      Set up the inbound list write pointer with the index of previous unit,
+      round to 0 if the index reaches the supported count of requests.
+
+    - Post the inbound list writer pointer to IOP.
+
+    - The IOP process the request. When the request is completed, the flag of
+      the request with or-ed IOPMU_QUEUE_MASK_HOST_BITS will be put into a
+      free outbound list unit and the index of the outbound list unit will be
+      put into the copy pointer shadow register. An outbound interrupt will be
+      generated.
+
+    - The host read the outbound list copy pointer shadow register and compare
+      with previous saved read pointer N. If they are different, the host will
+      read the (N+1)th outbound list unit.
+
+      The host get the index of the request from the (N+1)th outbound list
+      unit and complete the request.
+
+Non-queued requests (reset communication/reset/flush etc) can be sent via PCIe
+Function 0 to CPU Message A register. The CPU to PCIe Function 0 Message register
+with the same value indicates the completion of message.
+
+
+User-level Interface
+---------------------
+
+The driver exposes following sysfs attributes:
+
+     ==================   ===    ========================
+     NAME                 R/W    Description
+     ==================   ===    ========================
+     driver-version        R     driver version string
+     firmware-version      R     firmware version string
+     ==================   ===    ========================
+
+
+-----------------------------------------------------------------------------
+
+Copyright |copy| 2006-2012 HighPoint Technologies, Inc. All Rights Reserved.
+
+  This file is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+
+  linux@highpoint-tech.com
+
+  http://www.highpoint-tech.com
diff --git a/Documentation/scsi/hptiop.txt b/Documentation/scsi/hptiop.txt
deleted file mode 100644
index 12ecfd3..0000000
--- a/Documentation/scsi/hptiop.txt
+++ /dev/null
@@ -1,184 +0,0 @@
-HIGHPOINT ROCKETRAID 3xxx/4xxx ADAPTER DRIVER (hptiop)
-
-Controller Register Map
--------------------------
-
-For RR44xx Intel IOP based adapters, the controller IOP is accessed via PCI BAR0 and BAR2:
-
-     BAR0 offset    Register
-            0x11C5C Link Interface IRQ Set
-            0x11C60 Link Interface IRQ Clear
-
-     BAR2 offset    Register
-            0x10    Inbound Message Register 0
-            0x14    Inbound Message Register 1
-            0x18    Outbound Message Register 0
-            0x1C    Outbound Message Register 1
-            0x20    Inbound Doorbell Register
-            0x24    Inbound Interrupt Status Register
-            0x28    Inbound Interrupt Mask Register
-            0x30    Outbound Interrupt Status Register
-            0x34    Outbound Interrupt Mask Register
-            0x40    Inbound Queue Port
-            0x44    Outbound Queue Port
-
-For Intel IOP based adapters, the controller IOP is accessed via PCI BAR0:
-
-     BAR0 offset    Register
-            0x10    Inbound Message Register 0
-            0x14    Inbound Message Register 1
-            0x18    Outbound Message Register 0
-            0x1C    Outbound Message Register 1
-            0x20    Inbound Doorbell Register
-            0x24    Inbound Interrupt Status Register
-            0x28    Inbound Interrupt Mask Register
-            0x30    Outbound Interrupt Status Register
-            0x34    Outbound Interrupt Mask Register
-            0x40    Inbound Queue Port
-            0x44    Outbound Queue Port
-
-For Marvell not Frey IOP based adapters, the IOP is accessed via PCI BAR0 and BAR1:
-
-     BAR0 offset    Register
-         0x20400    Inbound Doorbell Register
-         0x20404    Inbound Interrupt Mask Register
-         0x20408    Outbound Doorbell Register
-         0x2040C    Outbound Interrupt Mask Register
-
-     BAR1 offset    Register
-             0x0    Inbound Queue Head Pointer
-             0x4    Inbound Queue Tail Pointer
-             0x8    Outbound Queue Head Pointer
-             0xC    Outbound Queue Tail Pointer
-            0x10    Inbound Message Register
-            0x14    Outbound Message Register
-     0x40-0x1040    Inbound Queue
-   0x1040-0x2040    Outbound Queue
-
-For Marvell Frey IOP based adapters, the IOP is accessed via PCI BAR0 and BAR1:
-
-     BAR0 offset    Register
-             0x0    IOP configuration information.
-
-     BAR1 offset    Register
-          0x4000    Inbound List Base Address Low
-          0x4004    Inbound List Base Address High
-          0x4018    Inbound List Write Pointer
-          0x402C    Inbound List Configuration and Control
-          0x4050    Outbound List Base Address Low
-          0x4054    Outbound List Base Address High
-          0x4058    Outbound List Copy Pointer Shadow Base Address Low
-          0x405C    Outbound List Copy Pointer Shadow Base Address High
-          0x4088    Outbound List Interrupt Cause
-          0x408C    Outbound List Interrupt Enable
-         0x1020C    PCIe Function 0 Interrupt Enable
-         0x10400    PCIe Function 0 to CPU Message A
-         0x10420    CPU to PCIe Function 0 Message A
-         0x10480    CPU to PCIe Function 0 Doorbell
-         0x10484    CPU to PCIe Function 0 Doorbell Enable
-
-
-I/O Request Workflow of Not Marvell Frey
-------------------------------------------
-
-All queued requests are handled via inbound/outbound queue port.
-A request packet can be allocated in either IOP or host memory.
-
-To send a request to the controller:
-
-    - Get a free request packet by reading the inbound queue port or
-      allocate a free request in host DMA coherent memory.
-
-      The value returned from the inbound queue port is an offset
-      relative to the IOP BAR0.
-
-      Requests allocated in host memory must be aligned on 32-bytes boundary.
-
-    - Fill the packet.
-
-    - Post the packet to IOP by writing it to inbound queue. For requests
-      allocated in IOP memory, write the offset to inbound queue port. For
-      requests allocated in host memory, write (0x80000000|(bus_addr>>5))
-      to the inbound queue port.
-
-    - The IOP process the request. When the request is completed, it
-      will be put into outbound queue. An outbound interrupt will be
-      generated.
-
-      For requests allocated in IOP memory, the request offset is posted to
-      outbound queue.
-
-      For requests allocated in host memory, (0x80000000|(bus_addr>>5))
-      is posted to the outbound queue. If IOP_REQUEST_FLAG_OUTPUT_CONTEXT
-      flag is set in the request, the low 32-bit context value will be
-      posted instead.
-
-    - The host read the outbound queue and complete the request.
-
-      For requests allocated in IOP memory, the host driver free the request
-      by writing it to the outbound queue.
-
-Non-queued requests (reset/flush etc) can be sent via inbound message
-register 0. An outbound message with the same value indicates the completion
-of an inbound message.
-
-
-I/O Request Workflow of Marvell Frey
---------------------------------------
-
-All queued requests are handled via inbound/outbound list.
-
-To send a request to the controller:
-
-    - Allocate a free request in host DMA coherent memory.
-
-      Requests allocated in host memory must be aligned on 32-bytes boundary.
-
-    - Fill the request with index of the request in the flag.
-
-      Fill a free inbound list unit with the physical address and the size of
-      the request.
-
-      Set up the inbound list write pointer with the index of previous unit,
-      round to 0 if the index reaches the supported count of requests.
-
-    - Post the inbound list writer pointer to IOP.
-
-    - The IOP process the request. When the request is completed, the flag of
-      the request with or-ed IOPMU_QUEUE_MASK_HOST_BITS will be put into a
-      free outbound list unit and the index of the outbound list unit will be
-      put into the copy pointer shadow register. An outbound interrupt will be
-      generated.
-
-    - The host read the outbound list copy pointer shadow register and compare
-      with previous saved read pointer N. If they are different, the host will
-      read the (N+1)th outbound list unit.
-
-      The host get the index of the request from the (N+1)th outbound list
-      unit and complete the request.
-
-Non-queued requests (reset communication/reset/flush etc) can be sent via PCIe
-Function 0 to CPU Message A register. The CPU to PCIe Function 0 Message register
-with the same value indicates the completion of message.
-
-
-User-level Interface
----------------------
-
-The driver exposes following sysfs attributes:
-
-     NAME                 R/W    Description
-     driver-version        R     driver version string
-     firmware-version      R     firmware version string
-
-
------------------------------------------------------------------------------
-Copyright (C) 2006-2012 HighPoint Technologies, Inc. All Rights Reserved.
-
-  This file is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-  GNU General Public License for more details.
-
-  linux@highpoint-tech.com
-  http://www.highpoint-tech.com
diff --git a/Documentation/scsi/index.rst b/Documentation/scsi/index.rst
new file mode 100644
index 0000000..7c5f5f8
--- /dev/null
+++ b/Documentation/scsi/index.rst
@@ -0,0 +1,51 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+====================
+Linux SCSI Subsystem
+====================
+
+.. toctree::
+   :maxdepth: 1
+
+   53c700
+   aacraid
+   advansys
+   aha152x
+   aic79xx
+   aic7xxx
+   arcmsr_spec
+   bfa
+   bnx2fc
+   BusLogic
+   cxgb3i
+   dc395x
+   dpti
+   FlashPoint
+   g_NCR5380
+   hpsa
+   hptiop
+   libsas
+   link_power_management_policy
+   lpfc
+   megaraid
+   ncr53c8xx
+   NinjaSCSI
+   ppa
+   qlogicfas
+   scsi-changer
+   scsi_eh
+   scsi_fc_transport
+   scsi-generic
+   scsi_mid_low_api
+   scsi-parameters
+   scsi
+   sd-parameters
+   smartpqi
+   st
+   sym53c500_cs
+   sym53c8xx_2
+   tcm_qla2xxx
+   ufs
+   wd719x
+
+   scsi_transport_srp/figures
diff --git a/Documentation/scsi/libsas.rst b/Documentation/scsi/libsas.rst
new file mode 100644
index 0000000..7216b5d
--- /dev/null
+++ b/Documentation/scsi/libsas.rst
@@ -0,0 +1,465 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========
+SAS Layer
+=========
+
+The SAS Layer is a management infrastructure which manages
+SAS LLDDs.  It sits between SCSI Core and SAS LLDDs.  The
+layout is as follows: while SCSI Core is concerned with
+SAM/SPC issues, and a SAS LLDD+sequencer is concerned with
+phy/OOB/link management, the SAS layer is concerned with:
+
+      * SAS Phy/Port/HA event management (LLDD generates,
+        SAS Layer processes),
+      * SAS Port management (creation/destruction),
+      * SAS Domain discovery and revalidation,
+      * SAS Domain device management,
+      * SCSI Host registration/unregistration,
+      * Device registration with SCSI Core (SAS) or libata
+        (SATA), and
+      * Expander management and exporting expander control
+        to user space.
+
+A SAS LLDD is a PCI device driver.  It is concerned with
+phy/OOB management, and vendor specific tasks and generates
+events to the SAS layer.
+
+The SAS Layer does most SAS tasks as outlined in the SAS 1.1
+spec.
+
+The sas_ha_struct describes the SAS LLDD to the SAS layer.
+Most of it is used by the SAS Layer but a few fields need to
+be initialized by the LLDDs.
+
+After initializing your hardware, from the probe() function
+you call sas_register_ha(). It will register your LLDD with
+the SCSI subsystem, creating a SCSI host and it will
+register your SAS driver with the sysfs SAS tree it creates.
+It will then return.  Then you enable your phys to actually
+start OOB (at which point your driver will start calling the
+notify_* event callbacks).
+
+Structure descriptions
+======================
+
+``struct sas_phy``
+------------------
+
+Normally this is statically embedded to your driver's
+phy structure::
+
+    struct my_phy {
+	    blah;
+	    struct sas_phy sas_phy;
+	    bleh;
+    };
+
+And then all the phys are an array of my_phy in your HA
+struct (shown below).
+
+Then as you go along and initialize your phys you also
+initialize the sas_phy struct, along with your own
+phy structure.
+
+In general, the phys are managed by the LLDD and the ports
+are managed by the SAS layer.  So the phys are initialized
+and updated by the LLDD and the ports are initialized and
+updated by the SAS layer.
+
+There is a scheme where the LLDD can RW certain fields,
+and the SAS layer can only read such ones, and vice versa.
+The idea is to avoid unnecessary locking.
+
+enabled
+    - must be set (0/1)
+
+id
+    - must be set [0,MAX_PHYS)]
+
+class, proto, type, role, oob_mode, linkrate
+    - must be set
+
+oob_mode
+    - you set this when OOB has finished and then notify
+      the SAS Layer.
+
+sas_addr
+    - this normally points to an array holding the sas
+      address of the phy, possibly somewhere in your my_phy
+      struct.
+
+attached_sas_addr
+    - set this when you (LLDD) receive an
+      IDENTIFY frame or a FIS frame, _before_ notifying the SAS
+      layer.  The idea is that sometimes the LLDD may want to fake
+      or provide a different SAS address on that phy/port and this
+      allows it to do this.  At best you should copy the sas
+      address from the IDENTIFY frame or maybe generate a SAS
+      address for SATA directly attached devices.  The Discover
+      process may later change this.
+
+frame_rcvd
+    - this is where you copy the IDENTIFY/FIS frame
+      when you get it; you lock, copy, set frame_rcvd_size and
+      unlock the lock, and then call the event.  It is a pointer
+      since there's no way to know your hw frame size _exactly_,
+      so you define the actual array in your phy struct and let
+      this pointer point to it.  You copy the frame from your
+      DMAable memory to that area holding the lock.
+
+sas_prim
+    - this is where primitives go when they're
+      received.  See sas.h. Grab the lock, set the primitive,
+      release the lock, notify.
+
+port
+    - this points to the sas_port if the phy belongs
+      to a port -- the LLDD only reads this. It points to the
+      sas_port this phy is part of.  Set by the SAS Layer.
+
+ha
+    - may be set; the SAS layer sets it anyway.
+
+lldd_phy
+    - you should set this to point to your phy so you
+      can find your way around faster when the SAS layer calls one
+      of your callbacks and passes you a phy.  If the sas_phy is
+      embedded you can also use container_of -- whatever you
+      prefer.
+
+
+``struct sas_port``
+-------------------
+
+The LLDD doesn't set any fields of this struct -- it only
+reads them.  They should be self explanatory.
+
+phy_mask is 32 bit, this should be enough for now, as I
+haven't heard of a HA having more than 8 phys.
+
+lldd_port
+    - I haven't found use for that -- maybe other
+      LLDD who wish to have internal port representation can make
+      use of this.
+
+``struct sas_ha_struct``
+------------------------
+
+It normally is statically declared in your own LLDD
+structure describing your adapter::
+
+    struct my_sas_ha {
+	blah;
+	struct sas_ha_struct sas_ha;
+	struct my_phy phys[MAX_PHYS];
+	struct sas_port sas_ports[MAX_PHYS]; /* (1) */
+	bleh;
+    };
+
+    (1) If your LLDD doesn't have its own port representation.
+
+What needs to be initialized (sample function given below).
+
+pcidev
+^^^^^^
+
+sas_addr
+       - since the SAS layer doesn't want to mess with
+	 memory allocation, etc, this points to statically
+	 allocated array somewhere (say in your host adapter
+	 structure) and holds the SAS address of the host
+	 adapter as given by you or the manufacturer, etc.
+
+sas_port
+^^^^^^^^
+
+sas_phy
+      - an array of pointers to structures. (see
+	note above on sas_addr).
+	These must be set.  See more notes below.
+
+num_phys
+       - the number of phys present in the sas_phy array,
+	 and the number of ports present in the sas_port
+	 array.  There can be a maximum num_phys ports (one per
+	 port) so we drop the num_ports, and only use
+	 num_phys.
+
+The event interface::
+
+	/* LLDD calls these to notify the class of an event. */
+	void (*notify_ha_event)(struct sas_ha_struct *, enum ha_event);
+	void (*notify_port_event)(struct sas_phy *, enum port_event);
+	void (*notify_phy_event)(struct sas_phy *, enum phy_event);
+
+When sas_register_ha() returns, those are set and can be
+called by the LLDD to notify the SAS layer of such events
+the SAS layer.
+
+The port notification::
+
+	/* The class calls these to notify the LLDD of an event. */
+	void (*lldd_port_formed)(struct sas_phy *);
+	void (*lldd_port_deformed)(struct sas_phy *);
+
+If the LLDD wants notification when a port has been formed
+or deformed it sets those to a function satisfying the type.
+
+A SAS LLDD should also implement at least one of the Task
+Management Functions (TMFs) described in SAM::
+
+	/* Task Management Functions. Must be called from process context. */
+	int (*lldd_abort_task)(struct sas_task *);
+	int (*lldd_abort_task_set)(struct domain_device *, u8 *lun);
+	int (*lldd_clear_aca)(struct domain_device *, u8 *lun);
+	int (*lldd_clear_task_set)(struct domain_device *, u8 *lun);
+	int (*lldd_I_T_nexus_reset)(struct domain_device *);
+	int (*lldd_lu_reset)(struct domain_device *, u8 *lun);
+	int (*lldd_query_task)(struct sas_task *);
+
+For more information please read SAM from T10.org.
+
+Port and Adapter management::
+
+	/* Port and Adapter management */
+	int (*lldd_clear_nexus_port)(struct sas_port *);
+	int (*lldd_clear_nexus_ha)(struct sas_ha_struct *);
+
+A SAS LLDD should implement at least one of those.
+
+Phy management::
+
+	/* Phy management */
+	int (*lldd_control_phy)(struct sas_phy *, enum phy_func);
+
+lldd_ha
+    - set this to point to your HA struct. You can also
+      use container_of if you embedded it as shown above.
+
+A sample initialization and registration function
+can look like this (called last thing from probe())
+*but* before you enable the phys to do OOB::
+
+    static int register_sas_ha(struct my_sas_ha *my_ha)
+    {
+	    int i;
+	    static struct sas_phy   *sas_phys[MAX_PHYS];
+	    static struct sas_port  *sas_ports[MAX_PHYS];
+
+	    my_ha->sas_ha.sas_addr = &my_ha->sas_addr[0];
+
+	    for (i = 0; i < MAX_PHYS; i++) {
+		    sas_phys[i] = &my_ha->phys[i].sas_phy;
+		    sas_ports[i] = &my_ha->sas_ports[i];
+	    }
+
+	    my_ha->sas_ha.sas_phy  = sas_phys;
+	    my_ha->sas_ha.sas_port = sas_ports;
+	    my_ha->sas_ha.num_phys = MAX_PHYS;
+
+	    my_ha->sas_ha.lldd_port_formed = my_port_formed;
+
+	    my_ha->sas_ha.lldd_dev_found = my_dev_found;
+	    my_ha->sas_ha.lldd_dev_gone = my_dev_gone;
+
+	    my_ha->sas_ha.lldd_execute_task = my_execute_task;
+
+	    my_ha->sas_ha.lldd_abort_task     = my_abort_task;
+	    my_ha->sas_ha.lldd_abort_task_set = my_abort_task_set;
+	    my_ha->sas_ha.lldd_clear_aca      = my_clear_aca;
+	    my_ha->sas_ha.lldd_clear_task_set = my_clear_task_set;
+	    my_ha->sas_ha.lldd_I_T_nexus_reset= NULL; (2)
+	    my_ha->sas_ha.lldd_lu_reset       = my_lu_reset;
+	    my_ha->sas_ha.lldd_query_task     = my_query_task;
+
+	    my_ha->sas_ha.lldd_clear_nexus_port = my_clear_nexus_port;
+	    my_ha->sas_ha.lldd_clear_nexus_ha = my_clear_nexus_ha;
+
+	    my_ha->sas_ha.lldd_control_phy = my_control_phy;
+
+	    return sas_register_ha(&my_ha->sas_ha);
+    }
+
+(2) SAS 1.1 does not define I_T Nexus Reset TMF.
+
+Events
+======
+
+Events are **the only way** a SAS LLDD notifies the SAS layer
+of anything.  There is no other method or way a LLDD to tell
+the SAS layer of anything happening internally or in the SAS
+domain.
+
+Phy events::
+
+	PHYE_LOSS_OF_SIGNAL, (C)
+	PHYE_OOB_DONE,
+	PHYE_OOB_ERROR,      (C)
+	PHYE_SPINUP_HOLD.
+
+Port events, passed on a _phy_::
+
+	PORTE_BYTES_DMAED,      (M)
+	PORTE_BROADCAST_RCVD,   (E)
+	PORTE_LINK_RESET_ERR,   (C)
+	PORTE_TIMER_EVENT,      (C)
+	PORTE_HARD_RESET.
+
+Host Adapter event:
+	HAE_RESET
+
+A SAS LLDD should be able to generate
+
+	- at least one event from group C (choice),
+	- events marked M (mandatory) are mandatory (only one),
+	- events marked E (expander) if it wants the SAS layer
+	  to handle domain revalidation (only one such).
+	- Unmarked events are optional.
+
+Meaning:
+
+HAE_RESET
+    - when your HA got internal error and was reset.
+
+PORTE_BYTES_DMAED
+    - on receiving an IDENTIFY/FIS frame
+
+PORTE_BROADCAST_RCVD
+    - on receiving a primitive
+
+PORTE_LINK_RESET_ERR
+    - timer expired, loss of signal, loss of DWS, etc. [1]_
+
+PORTE_TIMER_EVENT
+    - DWS reset timeout timer expired [1]_
+
+PORTE_HARD_RESET
+    - Hard Reset primitive received.
+
+PHYE_LOSS_OF_SIGNAL
+    - the device is gone [1]_
+
+PHYE_OOB_DONE
+    - OOB went fine and oob_mode is valid
+
+PHYE_OOB_ERROR
+    - Error while doing OOB, the device probably
+      got disconnected. [1]_
+
+PHYE_SPINUP_HOLD
+    - SATA is present, COMWAKE not sent.
+
+.. [1] should set/clear the appropriate fields in the phy,
+       or alternatively call the inlined sas_phy_disconnected()
+       which is just a helper, from their tasklet.
+
+The Execute Command SCSI RPC::
+
+	int (*lldd_execute_task)(struct sas_task *, gfp_t gfp_flags);
+
+Used to queue a task to the SAS LLDD.  @task is the task to be executed.
+@gfp_mask is the gfp_mask defining the context of the caller.
+
+This function should implement the Execute Command SCSI RPC,
+
+That is, when lldd_execute_task() is called, the command
+go out on the transport *immediately*.  There is *no*
+queuing of any sort and at any level in a SAS LLDD.
+
+Returns:
+
+   * -SAS_QUEUE_FULL, -ENOMEM, nothing was queued;
+   * 0, the task(s) were queued.
+
+::
+
+    struct sas_task {
+	    dev -- the device this task is destined to
+	    task_proto -- _one_ of enum sas_proto
+	    scatter -- pointer to scatter gather list array
+	    num_scatter -- number of elements in scatter
+	    total_xfer_len -- total number of bytes expected to be transferred
+	    data_dir -- PCI_DMA_...
+	    task_done -- callback when the task has finished execution
+    };
+
+Discovery
+=========
+
+The sysfs tree has the following purposes:
+
+    a) It shows you the physical layout of the SAS domain at
+       the current time, i.e. how the domain looks in the
+       physical world right now.
+    b) Shows some device parameters _at_discovery_time_.
+
+This is a link to the tree(1) program, very useful in
+viewing the SAS domain:
+ftp://mama.indstate.edu/linux/tree/
+
+I expect user space applications to actually create a
+graphical interface of this.
+
+That is, the sysfs domain tree doesn't show or keep state if
+you e.g., change the meaning of the READY LED MEANING
+setting, but it does show you the current connection status
+of the domain device.
+
+Keeping internal device state changes is responsibility of
+upper layers (Command set drivers) and user space.
+
+When a device or devices are unplugged from the domain, this
+is reflected in the sysfs tree immediately, and the device(s)
+removed from the system.
+
+The structure domain_device describes any device in the SAS
+domain.  It is completely managed by the SAS layer.  A task
+points to a domain device, this is how the SAS LLDD knows
+where to send the task(s) to.  A SAS LLDD only reads the
+contents of the domain_device structure, but it never creates
+or destroys one.
+
+Expander management from User Space
+===================================
+
+In each expander directory in sysfs, there is a file called
+"smp_portal".  It is a binary sysfs attribute file, which
+implements an SMP portal (Note: this is *NOT* an SMP port),
+to which user space applications can send SMP requests and
+receive SMP responses.
+
+Functionality is deceptively simple:
+
+1. Build the SMP frame you want to send. The format and layout
+   is described in the SAS spec.  Leave the CRC field equal 0.
+
+open(2)
+
+2. Open the expander's SMP portal sysfs file in RW mode.
+
+write(2)
+
+3. Write the frame you built in 1.
+
+read(2)
+
+4. Read the amount of data you expect to receive for the frame you built.
+   If you receive different amount of data you expected to receive,
+   then there was some kind of error.
+
+close(2)
+
+All this process is shown in detail in the function do_smp_func()
+and its callers, in the file "expander_conf.c".
+
+The kernel functionality is implemented in the file
+"sas_expander.c".
+
+The program "expander_conf.c" implements this. It takes one
+argument, the sysfs file name of the SMP portal to the
+expander, and gives expander information, including routing
+tables.
+
+The SMP portal gives you complete control of the expander,
+so please be careful.
diff --git a/Documentation/scsi/libsas.txt b/Documentation/scsi/libsas.txt
deleted file mode 100644
index 8cac649..0000000
--- a/Documentation/scsi/libsas.txt
+++ /dev/null
@@ -1,395 +0,0 @@
-SAS Layer
----------
-
-The SAS Layer is a management infrastructure which manages
-SAS LLDDs.  It sits between SCSI Core and SAS LLDDs.  The
-layout is as follows: while SCSI Core is concerned with
-SAM/SPC issues, and a SAS LLDD+sequencer is concerned with
-phy/OOB/link management, the SAS layer is concerned with:
-
-      * SAS Phy/Port/HA event management (LLDD generates,
-        SAS Layer processes),
-      * SAS Port management (creation/destruction),
-      * SAS Domain discovery and revalidation,
-      * SAS Domain device management,
-      * SCSI Host registration/unregistration,
-      * Device registration with SCSI Core (SAS) or libata
-        (SATA), and
-      * Expander management and exporting expander control
-        to user space.
-
-A SAS LLDD is a PCI device driver.  It is concerned with
-phy/OOB management, and vendor specific tasks and generates
-events to the SAS layer.
-
-The SAS Layer does most SAS tasks as outlined in the SAS 1.1
-spec.
-
-The sas_ha_struct describes the SAS LLDD to the SAS layer.
-Most of it is used by the SAS Layer but a few fields need to
-be initialized by the LLDDs.
-
-After initializing your hardware, from the probe() function
-you call sas_register_ha(). It will register your LLDD with
-the SCSI subsystem, creating a SCSI host and it will
-register your SAS driver with the sysfs SAS tree it creates.
-It will then return.  Then you enable your phys to actually
-start OOB (at which point your driver will start calling the
-notify_* event callbacks).
-
-Structure descriptions:
-
-struct sas_phy --------------------
-Normally this is statically embedded to your driver's
-phy structure:
-	struct my_phy {
-	       blah;
-	       struct sas_phy sas_phy;
-	       bleh;
-	};
-And then all the phys are an array of my_phy in your HA
-struct (shown below).
-
-Then as you go along and initialize your phys you also
-initialize the sas_phy struct, along with your own
-phy structure.
-
-In general, the phys are managed by the LLDD and the ports
-are managed by the SAS layer.  So the phys are initialized
-and updated by the LLDD and the ports are initialized and
-updated by the SAS layer.
-
-There is a scheme where the LLDD can RW certain fields,
-and the SAS layer can only read such ones, and vice versa.
-The idea is to avoid unnecessary locking.
-
-enabled -- must be set (0/1)
-id -- must be set [0,MAX_PHYS)
-class, proto, type, role, oob_mode, linkrate -- must be set
-oob_mode --  you set this when OOB has finished and then notify
-the SAS Layer.
-
-sas_addr -- this normally points to an array holding the sas
-address of the phy, possibly somewhere in your my_phy
-struct.
-
-attached_sas_addr -- set this when you (LLDD) receive an
-IDENTIFY frame or a FIS frame, _before_ notifying the SAS
-layer.  The idea is that sometimes the LLDD may want to fake
-or provide a different SAS address on that phy/port and this
-allows it to do this.  At best you should copy the sas
-address from the IDENTIFY frame or maybe generate a SAS
-address for SATA directly attached devices.  The Discover
-process may later change this.
-
-frame_rcvd -- this is where you copy the IDENTIFY/FIS frame
-when you get it; you lock, copy, set frame_rcvd_size and
-unlock the lock, and then call the event.  It is a pointer
-since there's no way to know your hw frame size _exactly_,
-so you define the actual array in your phy struct and let
-this pointer point to it.  You copy the frame from your
-DMAable memory to that area holding the lock.
-
-sas_prim -- this is where primitives go when they're
-received.  See sas.h. Grab the lock, set the primitive,
-release the lock, notify.
-
-port -- this points to the sas_port if the phy belongs
-to a port -- the LLDD only reads this. It points to the
-sas_port this phy is part of.  Set by the SAS Layer.
-
-ha -- may be set; the SAS layer sets it anyway.
-
-lldd_phy -- you should set this to point to your phy so you
-can find your way around faster when the SAS layer calls one
-of your callbacks and passes you a phy.  If the sas_phy is
-embedded you can also use container_of -- whatever you
-prefer.
-
-
-struct sas_port --------------------
-The LLDD doesn't set any fields of this struct -- it only
-reads them.  They should be self explanatory.
-
-phy_mask is 32 bit, this should be enough for now, as I
-haven't heard of a HA having more than 8 phys.
-
-lldd_port -- I haven't found use for that -- maybe other
-LLDD who wish to have internal port representation can make
-use of this.
-
-
-struct sas_ha_struct --------------------
-It normally is statically declared in your own LLDD
-structure describing your adapter:
-struct my_sas_ha {
-       blah;
-       struct sas_ha_struct sas_ha;
-       struct my_phy phys[MAX_PHYS];
-       struct sas_port sas_ports[MAX_PHYS]; /* (1) */
-       bleh;
-};
-
-(1) If your LLDD doesn't have its own port representation.
-
-What needs to be initialized (sample function given below).
-
-pcidev
-sas_addr -- since the SAS layer doesn't want to mess with
-	 memory allocation, etc, this points to statically
-	 allocated array somewhere (say in your host adapter
-	 structure) and holds the SAS address of the host
-	 adapter as given by you or the manufacturer, etc.
-sas_port
-sas_phy -- an array of pointers to structures. (see
-	note above on sas_addr).
-	These must be set.  See more notes below.
-num_phys -- the number of phys present in the sas_phy array,
-	 and the number of ports present in the sas_port
-	 array.  There can be a maximum num_phys ports (one per
-	 port) so we drop the num_ports, and only use
-	 num_phys.
-
-The event interface:
-
-	/* LLDD calls these to notify the class of an event. */
-	void (*notify_ha_event)(struct sas_ha_struct *, enum ha_event);
-	void (*notify_port_event)(struct sas_phy *, enum port_event);
-	void (*notify_phy_event)(struct sas_phy *, enum phy_event);
-
-When sas_register_ha() returns, those are set and can be
-called by the LLDD to notify the SAS layer of such events
-the SAS layer.
-
-The port notification:
-
-	/* The class calls these to notify the LLDD of an event. */
-	void (*lldd_port_formed)(struct sas_phy *);
-	void (*lldd_port_deformed)(struct sas_phy *);
-
-If the LLDD wants notification when a port has been formed
-or deformed it sets those to a function satisfying the type.
-
-A SAS LLDD should also implement at least one of the Task
-Management Functions (TMFs) described in SAM:
-
-	/* Task Management Functions. Must be called from process context. */
-	int (*lldd_abort_task)(struct sas_task *);
-	int (*lldd_abort_task_set)(struct domain_device *, u8 *lun);
-	int (*lldd_clear_aca)(struct domain_device *, u8 *lun);
-	int (*lldd_clear_task_set)(struct domain_device *, u8 *lun);
-	int (*lldd_I_T_nexus_reset)(struct domain_device *);
-	int (*lldd_lu_reset)(struct domain_device *, u8 *lun);
-	int (*lldd_query_task)(struct sas_task *);
-
-For more information please read SAM from T10.org.
-
-Port and Adapter management:
-
-	/* Port and Adapter management */
-	int (*lldd_clear_nexus_port)(struct sas_port *);
-	int (*lldd_clear_nexus_ha)(struct sas_ha_struct *);
-
-A SAS LLDD should implement at least one of those.
-
-Phy management:
-
-	/* Phy management */
-	int (*lldd_control_phy)(struct sas_phy *, enum phy_func);
-
-lldd_ha -- set this to point to your HA struct. You can also
-use container_of if you embedded it as shown above.
-
-A sample initialization and registration function
-can look like this (called last thing from probe())
-*but* before you enable the phys to do OOB:
-
-static int register_sas_ha(struct my_sas_ha *my_ha)
-{
-	int i;
-	static struct sas_phy   *sas_phys[MAX_PHYS];
-	static struct sas_port  *sas_ports[MAX_PHYS];
-
-	my_ha->sas_ha.sas_addr = &my_ha->sas_addr[0];
-
-	for (i = 0; i < MAX_PHYS; i++) {
-		sas_phys[i] = &my_ha->phys[i].sas_phy;
-		sas_ports[i] = &my_ha->sas_ports[i];
-	}
-
-	my_ha->sas_ha.sas_phy  = sas_phys;
-	my_ha->sas_ha.sas_port = sas_ports;
-	my_ha->sas_ha.num_phys = MAX_PHYS;
-
-	my_ha->sas_ha.lldd_port_formed = my_port_formed;
-
-	my_ha->sas_ha.lldd_dev_found = my_dev_found;
-	my_ha->sas_ha.lldd_dev_gone = my_dev_gone;
-
-	my_ha->sas_ha.lldd_execute_task = my_execute_task;
-
-	my_ha->sas_ha.lldd_abort_task     = my_abort_task;
-	my_ha->sas_ha.lldd_abort_task_set = my_abort_task_set;
-	my_ha->sas_ha.lldd_clear_aca      = my_clear_aca;
-	my_ha->sas_ha.lldd_clear_task_set = my_clear_task_set;
-	my_ha->sas_ha.lldd_I_T_nexus_reset= NULL; (2)
-	my_ha->sas_ha.lldd_lu_reset       = my_lu_reset;
-	my_ha->sas_ha.lldd_query_task     = my_query_task;
-
-	my_ha->sas_ha.lldd_clear_nexus_port = my_clear_nexus_port;
-	my_ha->sas_ha.lldd_clear_nexus_ha = my_clear_nexus_ha;
-
-	my_ha->sas_ha.lldd_control_phy = my_control_phy;
-
-	return sas_register_ha(&my_ha->sas_ha);
-}
-
-(2) SAS 1.1 does not define I_T Nexus Reset TMF.
-
-Events
-------
-
-Events are _the only way_ a SAS LLDD notifies the SAS layer
-of anything.  There is no other method or way a LLDD to tell
-the SAS layer of anything happening internally or in the SAS
-domain.
-
-Phy events:
-	PHYE_LOSS_OF_SIGNAL, (C)
-	PHYE_OOB_DONE,
-	PHYE_OOB_ERROR,      (C)
-	PHYE_SPINUP_HOLD.
-
-Port events, passed on a _phy_:
-	PORTE_BYTES_DMAED,      (M)
-	PORTE_BROADCAST_RCVD,   (E)
-	PORTE_LINK_RESET_ERR,   (C)
-	PORTE_TIMER_EVENT,      (C)
-	PORTE_HARD_RESET.
-
-Host Adapter event:
-	HAE_RESET
-
-A SAS LLDD should be able to generate
-	- at least one event from group C (choice),
-	- events marked M (mandatory) are mandatory (only one),
-	- events marked E (expander) if it wants the SAS layer
-	  to handle domain revalidation (only one such).
-	- Unmarked events are optional.
-
-Meaning:
-
-HAE_RESET -- when your HA got internal error and was reset.
-
-PORTE_BYTES_DMAED -- on receiving an IDENTIFY/FIS frame
-PORTE_BROADCAST_RCVD -- on receiving a primitive
-PORTE_LINK_RESET_ERR -- timer expired, loss of signal, loss
-of DWS, etc. (*)
-PORTE_TIMER_EVENT -- DWS reset timeout timer expired (*)
-PORTE_HARD_RESET -- Hard Reset primitive received.
-
-PHYE_LOSS_OF_SIGNAL -- the device is gone (*)
-PHYE_OOB_DONE -- OOB went fine and oob_mode is valid
-PHYE_OOB_ERROR -- Error while doing OOB, the device probably
-got disconnected. (*)
-PHYE_SPINUP_HOLD -- SATA is present, COMWAKE not sent.
-
-(*) should set/clear the appropriate fields in the phy,
-    or alternatively call the inlined sas_phy_disconnected()
-    which is just a helper, from their tasklet.
-
-The Execute Command SCSI RPC:
-
-	int (*lldd_execute_task)(struct sas_task *, gfp_t gfp_flags);
-
-Used to queue a task to the SAS LLDD.  @task is the task to be executed.
-@gfp_mask is the gfp_mask defining the context of the caller.
-
-This function should implement the Execute Command SCSI RPC,
-
-That is, when lldd_execute_task() is called, the command
-go out on the transport *immediately*.  There is *no*
-queuing of any sort and at any level in a SAS LLDD.
-
-Returns: -SAS_QUEUE_FULL, -ENOMEM, nothing was queued;
-	 0, the task(s) were queued.
-
-struct sas_task {
-	dev -- the device this task is destined to
-	task_proto -- _one_ of enum sas_proto
-	scatter -- pointer to scatter gather list array
-	num_scatter -- number of elements in scatter
-	total_xfer_len -- total number of bytes expected to be transferred
-	data_dir -- PCI_DMA_...
-	task_done -- callback when the task has finished execution
-};
-
-DISCOVERY
----------
-
-The sysfs tree has the following purposes:
-    a) It shows you the physical layout of the SAS domain at
-       the current time, i.e. how the domain looks in the
-       physical world right now.
-    b) Shows some device parameters _at_discovery_time_.
-
-This is a link to the tree(1) program, very useful in
-viewing the SAS domain:
-ftp://mama.indstate.edu/linux/tree/
-I expect user space applications to actually create a
-graphical interface of this.
-
-That is, the sysfs domain tree doesn't show or keep state if
-you e.g., change the meaning of the READY LED MEANING
-setting, but it does show you the current connection status
-of the domain device.
-
-Keeping internal device state changes is responsibility of
-upper layers (Command set drivers) and user space.
-
-When a device or devices are unplugged from the domain, this
-is reflected in the sysfs tree immediately, and the device(s)
-removed from the system.
-
-The structure domain_device describes any device in the SAS
-domain.  It is completely managed by the SAS layer.  A task
-points to a domain device, this is how the SAS LLDD knows
-where to send the task(s) to.  A SAS LLDD only reads the
-contents of the domain_device structure, but it never creates
-or destroys one.
-
-Expander management from User Space
------------------------------------
-
-In each expander directory in sysfs, there is a file called
-"smp_portal".  It is a binary sysfs attribute file, which
-implements an SMP portal (Note: this is *NOT* an SMP port),
-to which user space applications can send SMP requests and
-receive SMP responses.
-
-Functionality is deceptively simple:
-
-1. Build the SMP frame you want to send. The format and layout
-   is described in the SAS spec.  Leave the CRC field equal 0.
-open(2)
-2. Open the expander's SMP portal sysfs file in RW mode.
-write(2)
-3. Write the frame you built in 1.
-read(2)
-4. Read the amount of data you expect to receive for the frame you built.
-   If you receive different amount of data you expected to receive,
-   then there was some kind of error.
-close(2)
-All this process is shown in detail in the function do_smp_func()
-and its callers, in the file "expander_conf.c".
-
-The kernel functionality is implemented in the file
-"sas_expander.c".
-
-The program "expander_conf.c" implements this. It takes one
-argument, the sysfs file name of the SMP portal to the
-expander, and gives expander information, including routing
-tables.
-
-The SMP portal gives you complete control of the expander,
-so please be careful.
diff --git a/Documentation/scsi/link_power_management_policy.rst b/Documentation/scsi/link_power_management_policy.rst
new file mode 100644
index 0000000..64288dc
--- /dev/null
+++ b/Documentation/scsi/link_power_management_policy.rst
@@ -0,0 +1,25 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==========================
+Link Power Managent Policy
+==========================
+
+This parameter allows the user to set the link (interface) power management.
+There are 3 possible options:
+
+=====================   =====================================================
+Value			Effect
+=====================   =====================================================
+min_power		Tell the controller to try to make the link use the
+			least possible power when possible.  This may
+			sacrifice some performance due to increased latency
+			when coming out of lower power states.
+
+max_performance		Generally, this means no power management.  Tell
+			the controller to have performance be a priority
+			over power management.
+
+medium_power		Tell the controller to enter a lower power state
+			when possible, but do not enter the lowest power
+			state, thus improving latency over min_power setting.
+=====================   =====================================================
diff --git a/Documentation/scsi/link_power_management_policy.txt b/Documentation/scsi/link_power_management_policy.txt
deleted file mode 100644
index d18993d..0000000
--- a/Documentation/scsi/link_power_management_policy.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-This parameter allows the user to set the link (interface) power management.
-There are 3 possible options:
-
-Value			Effect
-----------------------------------------------------------------------------
-min_power		Tell the controller to try to make the link use the
-			least possible power when possible.  This may
-			sacrifice some performance due to increased latency
-			when coming out of lower power states.
-
-max_performance		Generally, this means no power management.  Tell
-			the controller to have performance be a priority
-			over power management.
-
-medium_power		Tell the controller to enter a lower power state
-			when possible, but do not enter the lowest power
-			state, thus improving latency over min_power setting.
-
-
diff --git a/Documentation/scsi/lpfc.rst b/Documentation/scsi/lpfc.rst
new file mode 100644
index 0000000..6e217e8
--- /dev/null
+++ b/Documentation/scsi/lpfc.rst
@@ -0,0 +1,81 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================
+LPFC Driver Release Notes
+=========================
+
+
+.. important::
+
+  Starting in the 8.0.17 release, the driver began to be targeted strictly
+  toward the upstream kernel. As such, we removed #ifdefs for older kernels
+  (pre 2.6.10). The 8.0.16 release should be used if the driver is to be
+  run on one of the older kernels.
+
+  The proposed modifications to the transport layer for FC remote ports
+  and extended attribute support is now part of the upstream kernel
+  as of 2.6.12. We no longer need to provide patches for this support,
+  nor a *full* version which has old an new kernel support.
+  
+  The driver now requires a 2.6.12 (if pre-release, 2.6.12-rc1) or later
+  kernel.
+  
+  Please heed these dependencies....
+
+
+The following information is provided for additional background on the
+history of the driver as we push for upstream acceptance.
+
+Cable pull and temporary device Loss:
+
+  In older revisions of the lpfc driver, the driver internally queued i/o 
+  received from the midlayer. In the cases where a cable was pulled, link
+  jitter, or a device temporarily loses connectivity (due to its cable
+  being removed, a switch rebooting, or a device reboot), the driver could
+  hide the disappearance of the device from the midlayer. I/O's issued to
+  the LLDD would simply be queued for a short duration, allowing the device
+  to reappear or link come back alive, with no inadvertent side effects
+  to the system. If the driver did not hide these conditions, i/o would be
+  errored by the driver, the mid-layer would exhaust its retries, and the
+  device would be taken offline. Manual intervention would be required to
+  re-enable the device.
+
+  The community supporting kernel.org has driven an effort to remove
+  internal queuing from all LLDDs. The philosophy is that internal
+  queuing is unnecessary as the block layer already performs the 
+  queuing. Removing the queues from the LLDD makes a more predictable
+  and more simple LLDD.
+
+  As a potential new addition to kernel.org, the 8.x driver was asked to
+  have all internal queuing removed. Emulex complied with this request.
+  In explaining the impacts of this change, Emulex has worked with the
+  community in modifying the behavior of the SCSI midlayer so that SCSI
+  devices can be temporarily suspended while transport events (such as
+  those described) can occur.  
+
+  The proposed patch was posted to the linux-scsi mailing list. The patch
+  is contained in the 2.6.10-rc2 (and later) patch kits. As such, this
+  patch is part of the standard 2.6.10 kernel.
+
+  By default, the driver expects the patches for block/unblock interfaces
+  to be present in the kernel. No #define needs to be set to enable support.
+
+
+Kernel Support
+==============
+
+  This source package is targeted for the upstream kernel only. (See notes
+  at the top of this file). It relies on interfaces that are slowing
+  migrating into the kernel.org kernel.
+
+  At this time, the driver requires the 2.6.12 (if pre-release, 2.6.12-rc1)
+  kernel.
+
+  If a driver is needed for older kernels please utilize the 8.0.16
+  driver sources.
+
+
+Patches
+=======
+
+  Thankfully, at this time, patches are not needed.
diff --git a/Documentation/scsi/lpfc.txt b/Documentation/scsi/lpfc.txt
deleted file mode 100644
index 5741ea8..0000000
--- a/Documentation/scsi/lpfc.txt
+++ /dev/null
@@ -1,83 +0,0 @@
-
-LPFC Driver Release Notes:
-
-=============================================================================
-
-
-                               IMPORTANT:
-
-  Starting in the 8.0.17 release, the driver began to be targeted strictly
-  toward the upstream kernel. As such, we removed #ifdefs for older kernels
-  (pre 2.6.10). The 8.0.16 release should be used if the driver is to be
-  run on one of the older kernels.
-
-  The proposed modifications to the transport layer for FC remote ports
-  and extended attribute support is now part of the upstream kernel
-  as of 2.6.12. We no longer need to provide patches for this support,
-  nor a *full* version which has old an new kernel support.
-  
-  The driver now requires a 2.6.12 (if pre-release, 2.6.12-rc1) or later
-  kernel.
-  
-  Please heed these dependencies....
-
-
-   ********************************************************************
-
-
-The following information is provided for additional background on the
-history of the driver as we push for upstream acceptance.
-
-Cable pull and temporary device Loss:
-
-  In older revisions of the lpfc driver, the driver internally queued i/o 
-  received from the midlayer. In the cases where a cable was pulled, link
-  jitter, or a device temporarily loses connectivity (due to its cable
-  being removed, a switch rebooting, or a device reboot), the driver could
-  hide the disappearance of the device from the midlayer. I/O's issued to
-  the LLDD would simply be queued for a short duration, allowing the device
-  to reappear or link come back alive, with no inadvertent side effects
-  to the system. If the driver did not hide these conditions, i/o would be
-  errored by the driver, the mid-layer would exhaust its retries, and the
-  device would be taken offline. Manual intervention would be required to
-  re-enable the device.
-
-  The community supporting kernel.org has driven an effort to remove
-  internal queuing from all LLDDs. The philosophy is that internal
-  queuing is unnecessary as the block layer already performs the 
-  queuing. Removing the queues from the LLDD makes a more predictable
-  and more simple LLDD.
-
-  As a potential new addition to kernel.org, the 8.x driver was asked to
-  have all internal queuing removed. Emulex complied with this request.
-  In explaining the impacts of this change, Emulex has worked with the
-  community in modifying the behavior of the SCSI midlayer so that SCSI
-  devices can be temporarily suspended while transport events (such as
-  those described) can occur.  
-
-  The proposed patch was posted to the linux-scsi mailing list. The patch
-  is contained in the 2.6.10-rc2 (and later) patch kits. As such, this
-  patch is part of the standard 2.6.10 kernel.
-
-  By default, the driver expects the patches for block/unblock interfaces
-  to be present in the kernel. No #define needs to be set to enable support.
-
-
-Kernel Support
-
-  This source package is targeted for the upstream kernel only. (See notes
-  at the top of this file). It relies on interfaces that are slowing
-  migrating into the kernel.org kernel.
-
-  At this time, the driver requires the 2.6.12 (if pre-release, 2.6.12-rc1)
-  kernel.
-
-  If a driver is needed for older kernels please utilize the 8.0.16
-  driver sources.
-
-
-Patches
-
-  Thankfully, at this time, patches are not needed.
-
-
diff --git a/Documentation/scsi/megaraid.rst b/Documentation/scsi/megaraid.rst
new file mode 100644
index 0000000..22b75a8
--- /dev/null
+++ b/Documentation/scsi/megaraid.rst
@@ -0,0 +1,77 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==========================
+Notes on Management Module
+==========================
+
+Overview
+--------
+
+Different classes of controllers from LSI Logic accept and respond to the
+user applications in a similar way. They understand the same firmware control
+commands. Furthermore, the applications also can treat different classes of
+the controllers uniformly. Hence it is logical to have a single module that
+interfaces with the applications on one side and all the low level drivers
+on the other.
+
+The advantages, though obvious, are listed for completeness:
+
+	i.	Avoid duplicate code from the low level drivers.
+	ii.	Unburden the low level drivers from having to export the
+		character node device and related handling.
+	iii.	Implement any policy mechanisms in one place.
+	iv.	Applications have to interface with only module instead of
+		multiple low level drivers.
+
+Currently this module (called Common Management Module) is used only to issue
+ioctl commands. But this module is envisioned to handle all user space level
+interactions. So any 'proc', 'sysfs' implementations will be localized in this
+common module.
+
+Credits
+-------
+
+::
+
+	"Shared code in a third module, a "library module", is an acceptable
+	solution. modprobe automatically loads dependent modules, so users
+	running "modprobe driver1" or "modprobe driver2" would automatically
+	load the shared library module."
+
+- Jeff Garzik (jgarzik@pobox.com), 02.25.2004 LKML
+
+::
+
+	"As Jeff hinted, if your userspace<->driver API is consistent between
+	your new MPT-based RAID controllers and your existing megaraid driver,
+	then perhaps you need a single small helper module (lsiioctl or some
+	better name), loaded by both mptraid and megaraid automatically, which
+	handles registering the /dev/megaraid node dynamically. In this case,
+	both mptraid and megaraid would register with lsiioctl for each
+	adapter discovered, and lsiioctl would essentially be a switch,
+	redirecting userspace tool ioctls to the appropriate driver."
+
+- Matt Domsch, (Matt_Domsch@dell.com), 02.25.2004 LKML
+
+Design
+------
+
+The Common Management Module is implemented in megaraid_mm.[ch] files. This
+module acts as a registry for low level hba drivers. The low level drivers
+(currently only megaraid) register each controller with the common module.
+
+The applications interface with the common module via the character device
+node exported by the module.
+
+The lower level drivers now understand only a new improved ioctl packet called
+uioc_t. The management module converts the older ioctl packets from the older
+applications into uioc_t. After driver handles the uioc_t, the common module
+will convert that back into the old format before returning to applications.
+
+As new applications evolve and replace the old ones, the old packet format
+will be retired.
+
+Common module dedicates one uioc_t packet to each controller registered. This
+can easily be more than one. But since megaraid is the only low level driver
+today, and it can handle only one ioctl, there is no reason to have more. But
+as new controller classes get added, this will be tuned appropriately.
diff --git a/Documentation/scsi/megaraid.txt b/Documentation/scsi/megaraid.txt
deleted file mode 100644
index 3c7cea5..0000000
--- a/Documentation/scsi/megaraid.txt
+++ /dev/null
@@ -1,70 +0,0 @@
-			Notes on Management Module
-			~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Overview:
---------
-
-Different classes of controllers from LSI Logic accept and respond to the
-user applications in a similar way. They understand the same firmware control
-commands. Furthermore, the applications also can treat different classes of
-the controllers uniformly. Hence it is logical to have a single module that
-interfaces with the applications on one side and all the low level drivers
-on the other.
-
-The advantages, though obvious, are listed for completeness:
-
-	i.	Avoid duplicate code from the low level drivers.
-	ii.	Unburden the low level drivers from having to export the
-		character node device and related handling.
-	iii.	Implement any policy mechanisms in one place.
-	iv.	Applications have to interface with only module instead of
-		multiple low level drivers.
-
-Currently this module (called Common Management Module) is used only to issue
-ioctl commands. But this module is envisioned to handle all user space level
-interactions. So any 'proc', 'sysfs' implementations will be localized in this
-common module.
-
-Credits:
--------
-
-"Shared code in a third module, a "library module", is an acceptable
-solution. modprobe automatically loads dependent modules, so users
-running "modprobe driver1" or "modprobe driver2" would automatically
-load the shared library module."
-
-		- Jeff Garzik (jgarzik@pobox.com), 02.25.2004 LKML
-
-"As Jeff hinted, if your userspace<->driver API is consistent between
-your new MPT-based RAID controllers and your existing megaraid driver,
-then perhaps you need a single small helper module (lsiioctl or some
-better name), loaded by both mptraid and megaraid automatically, which
-handles registering the /dev/megaraid node dynamically. In this case,
-both mptraid and megaraid would register with lsiioctl for each
-adapter discovered, and lsiioctl would essentially be a switch,
-redirecting userspace tool ioctls to the appropriate driver."
-
-		- Matt Domsch, (Matt_Domsch@dell.com), 02.25.2004 LKML
-
-Design:
-------
-
-The Common Management Module is implemented in megaraid_mm.[ch] files. This
-module acts as a registry for low level hba drivers. The low level drivers
-(currently only megaraid) register each controller with the common module.
-
-The applications interface with the common module via the character device
-node exported by the module.
-
-The lower level drivers now understand only a new improved ioctl packet called
-uioc_t. The management module converts the older ioctl packets from the older
-applications into uioc_t. After driver handles the uioc_t, the common module
-will convert that back into the old format before returning to applications.
-
-As new applications evolve and replace the old ones, the old packet format 
-will be retired.
-
-Common module dedicates one uioc_t packet to each controller registered. This
-can easily be more than one. But since megaraid is the only low level driver
-today, and it can handle only one ioctl, there is no reason to have more. But
-as new controller classes get added, this will be tuned appropriately.
diff --git a/Documentation/scsi/ncr53c8xx.rst b/Documentation/scsi/ncr53c8xx.rst
new file mode 100644
index 0000000..c41cec9
--- /dev/null
+++ b/Documentation/scsi/ncr53c8xx.rst
@@ -0,0 +1,2169 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=================================================
+The Linux NCR53C8XX/SYM53C8XX drivers README file
+=================================================
+
+Written by Gerard Roudier <groudier@free.fr>
+
+21 Rue Carnot
+
+95170 DEUIL LA BARRE - FRANCE
+
+29 May 1999
+
+.. Contents:
+
+   1.  Introduction
+   2.  Supported chips and SCSI features
+   3.  Advantages of the enhanced 896 driver
+         3.1 Optimized SCSI SCRIPTS
+         3.2 New features of the SYM53C896 (64 bit PCI dual LVD SCSI controller)
+   4.  Memory mapped I/O versus normal I/O
+   5.  Tagged command queueing
+   6.  Parity checking
+   7.  Profiling information
+   8.  Control commands
+         8.1  Set minimum synchronous period
+         8.2  Set wide size
+         8.3  Set maximum number of concurrent tagged commands
+         8.4  Set order type for tagged command
+         8.5  Set debug mode
+         8.6  Clear profile counters
+         8.7  Set flag (no_disc)
+         8.8  Set verbose level
+         8.9  Reset all logical units of a target
+         8.10 Abort all tasks of all logical units of a target
+   9.  Configuration parameters
+   10. Boot setup commands
+         10.1 Syntax
+         10.2 Available arguments
+                10.2.1  Master parity checking
+                10.2.2  Scsi parity checking
+                10.2.3  Scsi disconnections
+                10.2.4  Special features
+                10.2.5  Ultra SCSI support
+                10.2.6  Default number of tagged commands
+                10.2.7  Default synchronous period factor
+                10.2.8  Negotiate synchronous with all devices
+                10.2.9  Verbosity level
+                10.2.10 Debug mode
+                10.2.11 Burst max
+                10.2.12 LED support
+                10.2.13 Max wide
+                10.2.14 Differential mode
+                10.2.15 IRQ mode
+                10.2.16 Reverse probe
+                10.2.17 Fix up PCI configuration space
+                10.2.18 Serial NVRAM
+                10.2.19 Check SCSI BUS
+                10.2.20 Exclude a host from being attached
+                10.2.21 Suggest a default SCSI id for hosts
+                10.2.22 Enable use of IMMEDIATE ARBITRATION
+         10.3 Advised boot setup commands
+         10.4 PCI configuration fix-up boot option
+         10.5 Serial NVRAM support boot option
+         10.6 SCSI BUS checking boot option
+         10.7 IMMEDIATE ARBITRATION boot option
+   11. Some constants and flags of the ncr53c8xx.h header file
+   12. Installation
+   13. Architecture dependent features
+   14. Known problems
+         14.1 Tagged commands with Iomega Jaz device
+         14.2 Device names change when another controller is added
+         14.3 Using only 8 bit devices with a WIDE SCSI controller.
+         14.4 Possible data corruption during a Memory Write and Invalidate
+         14.5 IRQ sharing problems
+   15. SCSI problem troubleshooting
+         15.1 Problem tracking
+         15.2 Understanding hardware error reports
+   16. Synchronous transfer negotiation tables
+         16.1 Synchronous timings for 53C875 and 53C860 Ultra-SCSI controllers
+         16.2 Synchronous timings for fast SCSI-2 53C8XX controllers
+   17. Serial NVRAM support (by Richard Waltham)
+         17.1 Features
+         17.2 Symbios NVRAM layout
+         17.3 Tekram  NVRAM layout
+   18. Support for Big Endian
+         18.1 Big Endian CPU
+         18.2 NCR chip in Big Endian mode of operations
+
+1. Introduction
+===============
+
+The initial Linux ncr53c8xx driver has been a port of the ncr driver from
+FreeBSD that has been achieved in November 1995 by:
+
+	- Gerard Roudier              <groudier@free.fr>
+
+The original driver has been written for 386bsd and FreeBSD by:
+
+        - Wolfgang Stanglmeier        <wolf@cologne.de>
+        - Stefan Esser                <se@mi.Uni-Koeln.de>
+
+It is now available as a bundle of 2 drivers:
+
+- ncr53c8xx generic driver that supports all the SYM53C8XX family including
+  the earliest 810 rev. 1, the latest 896 (2 channel LVD SCSI controller) and
+  the new 895A (1 channel LVD SCSI controller).
+- sym53c8xx enhanced driver (a.k.a. 896 drivers) that drops support of oldest
+  chips in order to gain advantage of new features, as LOAD/STORE instructions
+  available since the 810A and hardware phase mismatch available with the
+  896 and the 895A.
+
+You can find technical information about the NCR 8xx family in the
+PCI-HOWTO written by Michael Will and in the SCSI-HOWTO written by
+Drew Eckhardt.
+
+Information about new chips is available at LSILOGIC web server:
+
+          - http://www.lsilogic.com/
+
+SCSI standard documentations are available at SYMBIOS ftp server:
+
+          - ftp://ftp.symbios.com/
+
+Useful SCSI tools written by Eric Youngdale are available at tsx-11:
+
+          - ftp://tsx-11.mit.edu/pub/linux/ALPHA/scsi/scsiinfo-X.Y.tar.gz
+          - ftp://tsx-11.mit.edu/pub/linux/ALPHA/scsi/scsidev-X.Y.tar.gz
+
+These tools are not ALPHA but quite clean and work quite well.
+It is essential you have the 'scsiinfo' package.
+
+This short documentation describes the features of the generic and enhanced
+drivers, configuration parameters and control commands available through
+the proc SCSI file system read / write operations.
+
+This driver has been tested OK with linux/i386, Linux/Alpha and Linux/PPC.
+
+Latest driver version and patches are available at:
+
+          - ftp://ftp.tux.org/pub/people/gerard-roudier
+
+or
+
+          - ftp://ftp.symbios.com/mirror/ftp.tux.org/pub/tux/roudier/drivers
+
+I am not a native speaker of English and there are probably lots of
+mistakes in this README file. Any help will be welcome.
+
+
+2. Supported chips and SCSI features
+====================================
+
+The following features are supported for all chips:
+
+	- Synchronous negotiation
+	- Disconnection
+	- Tagged command queuing
+	- SCSI parity checking
+	- Master parity checking
+
+"Wide negotiation" is supported for chips that allow it.  The
+following table shows some characteristics of NCR 8xx family chips
+and what drivers support them.
+
++--------+-----------+-----+-----------+------------+------------+------------+
+|        |           |     |           |            |Supported by|Supported by|
+|        |On board   |     |           |            |the generic |the enhanced|
+|Chip    |SDMS BIOS  |Wide |SCSI std.  | Max. sync  |driver      |driver      |
++--------+-----------+-----+-----------+------------+------------+------------+
+|810     |  N        | N   |  FAST10   | 10 MB/s    |    Y       |    N       |
++--------+-----------+-----+-----------+------------+------------+------------+
+|810A    |  N        | N   |  FAST10   | 10 MB/s    |    Y       |    Y       |
++--------+-----------+-----+-----------+------------+------------+------------+
+|815     |  Y        | N   |  FAST10   | 10 MB/s    |    Y       |    N       |
++--------+-----------+-----+-----------+------------+------------+------------+
+|825     |  Y        | Y   |  FAST10   | 20 MB/s    |    Y       |    N       |
++--------+-----------+-----+-----------+------------+------------+------------+
+|825A    |  Y        | Y   |  FAST10   | 20 MB/s    |    Y       |    Y       |
++--------+-----------+-----+-----------+------------+------------+------------+
+|860     |  N        | N   |  FAST20   | 20 MB/s    |    Y       |    Y       |
++--------+-----------+-----+-----------+------------+------------+------------+
+|875     |  Y        | Y   |  FAST20   | 40 MB/s    |    Y       |    Y       |
++--------+-----------+-----+-----------+------------+------------+------------+
+|876     |  Y        | Y   |  FAST20   | 40 MB/s    |    Y       |    Y       |
++--------+-----------+-----+-----------+------------+------------+------------+
+|895     |  Y        | Y   |  FAST40   | 80 MB/s    |    Y       |    Y       |
++--------+-----------+-----+-----------+------------+------------+------------+
+|895A    |  Y        | Y   |  FAST40   | 80 MB/s    |    Y       |    Y       |
++--------+-----------+-----+-----------+------------+------------+------------+
+|896     |  Y        | Y   |  FAST40   | 80 MB/s    |    Y       |    Y       |
++--------+-----------+-----+-----------+------------+------------+------------+
+|897     |  Y        | Y   |  FAST40   | 80 MB/s    |    Y       |    Y       |
++--------+-----------+-----+-----------+------------+------------+------------+
+|1510D   |  Y        | Y   |  FAST40   | 80 MB/s    |    Y       |    Y       |
++--------+-----------+-----+-----------+------------+------------+------------+
+|1010    |  Y        | Y   |  FAST80   |160 MB/s    |    N       |    Y       |
++--------+-----------+-----+-----------+------------+------------+------------+
+|1010_66 |  Y        | Y   |  FAST80   |160 MB/s    |    N       |    Y       |
+|[1]_    |           |     |           |            |            |            |
++--------+-----------+-----+-----------+------------+------------+------------+
+
+.. [1] Chip supports 33MHz and 66MHz PCI buses.
+
+
+Summary of other supported features:
+
+:Module:                allow to load the driver
+:Memory mapped I/O:     increases performance
+:Profiling information: read operations from the proc SCSI file system
+:Control commands:      write operations to the proc SCSI file system
+:Debugging information: written to syslog (expert only)
+:Serial NVRAM:          Symbios and Tekram formats
+
+- Scatter / gather
+- Shared interrupt
+- Boot setup commands
+
+
+3. Advantages of the enhanced 896 driver
+========================================
+
+3.1 Optimized SCSI SCRIPTS
+--------------------------
+
+The 810A, 825A, 875, 895, 896 and 895A support new SCSI SCRIPTS instructions
+named LOAD and STORE that allow to move up to 1 DWORD from/to an IO register
+to/from memory much faster that the MOVE MEMORY instruction that is supported
+by the 53c7xx and 53c8xx family.
+The LOAD/STORE instructions support absolute and DSA relative addressing
+modes.  The SCSI SCRIPTS had been entirely rewritten using LOAD/STORE instead
+of MOVE MEMORY instructions.
+
+3.2 New features of the SYM53C896 (64 bit PCI dual LVD SCSI controller)
+-----------------------------------------------------------------------
+
+The 896 and the 895A allows handling of the phase mismatch context from
+SCRIPTS (avoids the phase mismatch interrupt that stops the SCSI processor
+until the C code has saved the context of the transfer).
+Implementing this without using LOAD/STORE instructions would be painful
+and I didn't even want to try it.
+
+The 896 chip supports 64 bit PCI transactions and addressing, while the
+895A supports 32 bit PCI transactions and 64 bit addressing.
+The SCRIPTS processor of these chips is not true 64 bit, but uses segment
+registers for bit 32-63. Another interesting feature is that LOAD/STORE
+instructions that address the on-chip RAM (8k) remain internal to the chip.
+
+Due to the use of LOAD/STORE SCRIPTS instructions, this driver does not
+support the following chips:
+
+- SYM53C810 revision < 0x10 (16)
+- SYM53C815 all revisions
+- SYM53C825 revision < 0x10 (16)
+
+4. Memory mapped I/O versus normal I/O
+======================================
+
+Memory mapped I/O has less latency than normal I/O.  Since
+linux-1.3.x, memory mapped I/O is used rather than normal I/O.  Memory
+mapped I/O seems to work fine on most hardware configurations, but
+some poorly designed motherboards may break this feature.
+
+The configuration option CONFIG_SCSI_NCR53C8XX_IOMAPPED forces the
+driver to use normal I/O in all cases.
+
+
+5. Tagged command queueing
+==========================
+
+Queuing more than 1 command at a time to a device allows it to perform
+optimizations based on actual head positions and its mechanical
+characteristics. This feature may also reduce average command latency.
+In order to really gain advantage of this feature, devices must have
+a reasonable cache size (No miracle is to be expected for a low-end
+hard disk with 128 KB or less).
+Some known SCSI devices do not properly support tagged command queuing.
+Generally, firmware revisions that fix this kind of problems are available
+at respective vendor web/ftp sites.
+All I can say is that the hard disks I use on my machines behave well with
+this driver with tagged command queuing enabled:
+
+- IBM S12 0662
+- Conner 1080S
+- Quantum Atlas I
+- Quantum Atlas II
+
+If your controller has NVRAM, you can configure this feature per target
+from the user setup tool. The Tekram Setup program allows to tune the
+maximum number of queued commands up to 32. The Symbios Setup only allows
+to enable or disable this feature.
+
+The maximum number of simultaneous tagged commands queued to a device
+is currently set to 8 by default.  This value is suitable for most SCSI
+disks.  With large SCSI disks (>= 2GB, cache >= 512KB, average seek time
+<= 10 ms), using a larger value may give better performances.
+
+The sym53c8xx driver supports up to 255 commands per device, and the
+generic ncr53c8xx driver supports up to 64, but using more than 32 is
+generally not worth-while, unless you are using a very large disk or disk
+array. It is noticeable that most of recent hard disks seem not to accept
+more than 64 simultaneous commands. So, using more than 64 queued commands
+is probably just resource wasting.
+
+If your controller does not have NVRAM or if it is managed by the SDMS
+BIOS/SETUP, you can configure tagged queueing feature and device queue
+depths from the boot command-line. For example::
+
+  ncr53c8xx=tags:4/t2t3q15-t4q7/t1u0q32
+
+will set tagged commands queue depths as follow:
+
+- target 2  all luns  on controller 0 --> 15
+- target 3  all luns  on controller 0 --> 15
+- target 4  all luns  on controller 0 -->  7
+- target 1  lun 0     on controller 1 --> 32
+- all other target/lun                -->  4
+
+In some special conditions, some SCSI disk firmwares may return a
+QUEUE FULL status for a SCSI command. This behaviour is managed by the
+driver using the following heuristic:
+
+- Each time a QUEUE FULL status is returned, tagged queue depth is reduced
+  to the actual number of disconnected commands.
+
+- Every 1000 successfully completed SCSI commands, if allowed by the
+  current limit, the maximum number of queueable commands is incremented.
+
+Since QUEUE FULL status reception and handling is resource wasting, the
+driver notifies by default this problem to user by indicating the actual
+number of commands used and their status, as well as its decision on the
+device queue depth change.
+The heuristic used by the driver in handling QUEUE FULL ensures that the
+impact on performances is not too bad. You can get rid of the messages by
+setting verbose level to zero, as follow:
+
+1st method:
+	    boot your system using 'ncr53c8xx=verb:0' option.
+
+2nd method:
+	    apply "setverbose 0" control command to the proc fs entry
+            corresponding to your controller after boot-up.
+
+6. Parity checking
+==================
+
+The driver supports SCSI parity checking and PCI bus master parity
+checking.  These features must be enabled in order to ensure safe data
+transfers.  However, some flawed devices or mother boards will have
+problems with parity. You can disable either PCI parity or SCSI parity
+checking by entering appropriate options from the boot command line.
+(See 10: Boot setup commands).
+
+7. Profiling information
+========================
+
+Profiling information is available through the proc SCSI file system.
+Since gathering profiling information may impact performances, this
+feature is disabled by default and requires a compilation configuration
+option to be set to Y.
+
+The device associated with a host has the following pathname::
+
+          /proc/scsi/ncr53c8xx/N     (N=0,1,2 ....)
+
+Generally, only 1 board is used on hardware configuration, and that device is::
+
+          /proc/scsi/ncr53c8xx/0
+
+However, if the driver has been made as module, the number of the
+hosts is incremented each time the driver is loaded.
+
+In order to display profiling information, just enter::
+
+         cat /proc/scsi/ncr53c8xx/0
+
+and you will get something like the following text::
+
+    General information:
+    Chip NCR53C810, device id 0x1, revision id 0x2
+    IO port address 0x6000, IRQ number 10
+    Using memory mapped IO at virtual address 0x282c000
+    Synchronous transfer period 25, max commands per lun 4
+    Profiling information:
+    num_trans    = 18014
+    num_kbytes   = 671314
+    num_disc     = 25763
+    num_break    = 1673
+    num_int      = 1685
+    num_fly      = 18038
+    ms_setup     = 4940
+    ms_data      = 369940
+    ms_disc      = 183090
+    ms_post      = 1320
+
+General information is easy to understand. The device ID and the
+revision ID identify the SCSI chip as follows:
+
+======= ============= ===========
+Chip    Device id     Revision Id
+======= ============= ===========
+810       0x1            <  0x10
+810A      0x1            >= 0x10
+815       0x4
+825       0x3            <  0x10
+860       0x6
+825A      0x3            >= 0x10
+875       0xf
+895       0xc
+======= ============= ===========
+
+The profiling information is updated upon completion of SCSI commands.
+A data structure is allocated and zeroed when the host adapter is
+attached. So, if the driver is a module, the profile counters are
+cleared each time the driver is loaded.  The "clearprof" command
+allows you to clear these counters at any time.
+
+The following counters are available:
+
+("num" prefix means "number of",
+"ms" means milli-seconds)
+
+num_trans
+	Number of completed commands
+	Example above: 18014 completed commands
+
+num_kbytes
+	Number of kbytes transferred
+	Example above: 671 MB transferred
+
+num_disc
+	Number of SCSI disconnections
+	Example above: 25763 SCSI disconnections
+
+num_break
+	number of script interruptions (phase mismatch)
+	Example above: 1673 script interruptions
+
+num_int
+	Number of interrupts other than "on the fly"
+	Example above: 1685 interruptions not "on the fly"
+
+num_fly
+	Number of interrupts "on the fly"
+	Example above: 18038 interruptions "on the fly"
+
+ms_setup
+	Elapsed time for SCSI commands setups
+	Example above: 4.94 seconds
+
+ms_data
+	Elapsed time for data transfers
+	Example above: 369.94 seconds spent for data transfer
+
+ms_disc
+	Elapsed time for SCSI disconnections
+	Example above: 183.09 seconds spent disconnected
+
+ms_post
+	Elapsed time for command post processing
+	(time from SCSI status get to command completion call)
+	Example above: 1.32 seconds spent for post processing
+
+Due to the 1/100 second tick of the system clock, "ms_post" time may
+be wrong.
+
+In the example above, we got 18038 interrupts "on the fly" and only
+1673 script breaks generally due to disconnections inside a segment
+of the scatter list.
+
+
+8. Control commands
+===================
+
+Control commands can be sent to the driver with write operations to
+the proc SCSI file system. The generic command syntax is the
+following::
+
+      echo "<verb> <parameters>" >/proc/scsi/ncr53c8xx/0
+      (assumes controller number is 0)
+
+Using "all" for "<target>" parameter with the commands below will
+apply to all targets of the SCSI chain (except the controller).
+
+Available commands:
+
+8.1 Set minimum synchronous period factor
+-----------------------------------------
+
+    setsync <target> <period factor>
+
+    :target:   target number
+    :period:   minimum synchronous period.
+               Maximum speed = 1000/(4*period factor) except for special
+               cases below.
+
+    Specify a period of 255, to force asynchronous transfer mode.
+
+      - 10 means 25 nano-seconds synchronous period
+      - 11 means 30 nano-seconds synchronous period
+      - 12 means 50 nano-seconds synchronous period
+
+8.2 Set wide size
+-----------------
+
+    setwide <target> <size>
+
+    :target:   target number
+    :size:     0=8 bits, 1=16bits
+
+8.3 Set maximum number of concurrent tagged commands
+----------------------------------------------------
+
+    settags <target> <tags>
+
+    :target:   target number
+    :tags:     number of concurrent tagged commands
+               must not be greater than SCSI_NCR_MAX_TAGS (default: 8)
+
+8.4 Set order type for tagged command
+-------------------------------------
+
+    setorder <order>
+
+    :order:    3 possible values:
+
+               simple:
+			use SIMPLE TAG for all operations (read and write)
+
+               ordered:
+			use ORDERED TAG for all operations
+
+               default:
+			use default tag type,
+                        SIMPLE  TAG for read  operations
+                        ORDERED TAG for write operations
+
+
+8.5 Set debug mode
+------------------
+
+    setdebug <list of debug flags>
+
+    Available debug flags:
+
+	======== ========================================================
+        alloc    print info about memory allocations (ccb, lcb)
+        queue    print info about insertions into the command start queue
+        result   print sense data on CHECK CONDITION status
+        scatter  print info about the scatter process
+        scripts  print info about the script binding process
+	tiny     print minimal debugging information
+	timing   print timing information of the NCR chip
+	nego     print information about SCSI negotiations
+	phase    print information on script interruptions
+	======== ========================================================
+
+    Use "setdebug" with no argument to reset debug flags.
+
+
+8.6 Clear profile counters
+--------------------------
+
+    clearprof
+
+    The profile counters are automatically cleared when the amount of
+    data transferred reaches 1000 GB in order to avoid overflow.
+    The "clearprof" command allows you to clear these counters at any time.
+
+
+8.7 Set flag (no_disc)
+----------------------
+
+    setflag <target> <flag>
+
+    target:    target number
+
+    For the moment, only one flag is available:
+
+        no_disc:   not allow target to disconnect.
+
+    Do not specify any flag in order to reset the flag. For example:
+
+    setflag 4
+      will reset no_disc flag for target 4, so will allow it disconnections.
+
+    setflag all
+      will allow disconnection for all devices on the SCSI bus.
+
+
+8.8 Set verbose level
+---------------------
+
+    setverbose #level
+
+    The driver default verbose level is 1. This command allows to change
+    th driver verbose level after boot-up.
+
+8.9 Reset all logical units of a target
+---------------------------------------
+
+    resetdev <target>
+
+    :target:   target number
+
+    The driver will try to send a BUS DEVICE RESET message to the target.
+    (Only supported by the SYM53C8XX driver and provided for test purpose)
+
+8.10 Abort all tasks of all logical units of a target
+-----------------------------------------------------
+
+    cleardev <target>
+
+    :target:   target number
+
+    The driver will try to send a ABORT message to all the logical units
+    of the target.
+
+    (Only supported by the SYM53C8XX driver and provided for test purpose)
+
+
+9. Configuration parameters
+===========================
+
+If the firmware of all your devices is perfect enough, all the
+features supported by the driver can be enabled at start-up.  However,
+if only one has a flaw for some SCSI feature, you can disable the
+support by the driver of this feature at linux start-up and enable
+this feature after boot-up only for devices that support it safely.
+
+CONFIG_SCSI_NCR53C8XX_IOMAPPED       (default answer: n)
+    Answer "y" if you suspect your mother board to not allow memory mapped I/O.
+
+    May slow down performance a little.  This option is required by
+    Linux/PPC and is used no matter what you select here.  Linux/PPC
+    suffers no performance loss with this option since all IO is memory
+    mapped anyway.
+
+CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS    (default answer: 8)
+    Default tagged command queue depth.
+
+CONFIG_SCSI_NCR53C8XX_MAX_TAGS         (default answer: 8)
+    This option allows you to specify the maximum number of tagged commands
+    that can be queued to a device. The maximum supported value is 32.
+
+CONFIG_SCSI_NCR53C8XX_SYNC            (default answer: 5)
+    This option allows you to specify the frequency in MHz the driver
+    will use at boot time for synchronous data transfer negotiations.
+    This frequency can be changed later with the "setsync" control command.
+    0 means "asynchronous data transfers".
+
+CONFIG_SCSI_NCR53C8XX_FORCE_SYNC_NEGO (default answer: n)
+    Force synchronous negotiation for all SCSI-2 devices.
+
+    Some SCSI-2 devices do not report this feature in byte 7 of inquiry
+    response but do support it properly (TAMARACK scanners for example).
+
+CONFIG_SCSI_NCR53C8XX_NO_DISCONNECT   (default and only reasonable answer: n)
+    If you suspect a device of yours does not properly support disconnections,
+    you can answer "y". Then, all SCSI devices will never disconnect the bus
+    even while performing long SCSI operations.
+
+CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT
+    Genuine SYMBIOS boards use GPIO0 in output for controller LED and GPIO3
+    bit as a flag indicating singled-ended/differential interface.
+    If all the boards of your system are genuine SYMBIOS boards or use
+    BIOS and drivers from SYMBIOS, you would want to enable this option.
+
+    This option must NOT be enabled if your system has at least one 53C8XX
+    based scsi board with a vendor-specific BIOS.
+    For example, Tekram DC-390/U, DC-390/W and DC-390/F scsi controllers
+    use a vendor-specific BIOS and are known to not use SYMBIOS compatible
+    GPIO wiring. So, this option must not be enabled if your system has
+    such a board installed.
+
+CONFIG_SCSI_NCR53C8XX_NVRAM_DETECT
+    Enable support for reading the serial NVRAM data on Symbios and
+    some Symbios compatible cards, and Tekram DC390W/U/F cards. Useful for
+    systems with more than one Symbios compatible controller where at least
+    one has a serial NVRAM, or for a system with a mixture of Symbios and
+    Tekram cards. Enables setting the boot order of host adaptors
+    to something other than the default order or "reverse probe" order.
+    Also enables Symbios and Tekram cards to be distinguished so
+    CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT may be set in a system with a
+    mixture of Symbios and Tekram cards so the Symbios cards can make use of
+    the full range of Symbios features, differential, led pin, without
+    causing problems for the Tekram card(s).
+
+10. Boot setup commands
+=======================
+
+10.1 Syntax
+-----------
+
+Setup commands can be passed to the driver either at boot time or as a
+string variable using 'insmod'.
+
+A boot setup command for the ncr53c8xx (sym53c8xx) driver begins with the
+driver name "ncr53c8xx="(sym53c8xx). The kernel syntax parser then expects
+an optional list of integers separated with comma followed by an optional
+list of comma-separated strings. Example of boot setup command under lilo
+prompt::
+
+    lilo: linux root=/dev/hda2 ncr53c8xx=tags:4,sync:10,debug:0x200
+
+- enable tagged commands, up to 4 tagged commands queued.
+- set synchronous negotiation speed to 10 Mega-transfers / second.
+- set DEBUG_NEGO flag.
+
+Since comma seems not to be allowed when defining a string variable using
+'insmod', the driver also accepts <space> as option separator.
+The following command will install driver module with the same options as
+above::
+
+    insmod ncr53c8xx.o ncr53c8xx="tags:4 sync:10 debug:0x200"
+
+For the moment, the integer list of arguments is discarded by the driver.
+It will be used in the future in order to allow a per controller setup.
+
+Each string argument must be specified as "keyword:value". Only lower-case
+characters and digits are allowed.
+
+In a system that contains multiple 53C8xx adapters insmod will install the
+specified driver on each adapter. To exclude a chip use the 'excl' keyword.
+
+The sequence of commands::
+
+    insmod sym53c8xx sym53c8xx=excl:0x1400
+    insmod ncr53c8xx
+
+installs the sym53c8xx driver on all adapters except the one at IO port
+address 0x1400 and then installs the ncr53c8xx driver to the adapter at IO
+port address 0x1400.
+
+
+10.2 Available arguments
+------------------------
+
+10.2.1  Master parity checking
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+	======     ========
+        mpar:y     enabled
+        mpar:n     disabled
+	======     ========
+
+10.2.2  Scsi parity checking
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+	======     ========
+        spar:y     enabled
+        spar:n     disabled
+	======     ========
+
+10.2.3  Scsi disconnections
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+	======     ========
+        disc:y     enabled
+        disc:n     disabled
+	======     ========
+
+10.2.4  Special features
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+   Only apply to 810A, 825A, 860, 875 and 895 controllers.
+   Have no effect with other ones.
+
+	=======    =================================================
+        specf:y    (or 1) enabled
+        specf:n    (or 0) disabled
+        specf:3           enabled except Memory Write And Invalidate
+	=======    =================================================
+
+   The default driver setup is 'specf:3'. As a consequence, option 'specf:y'
+   must be specified in the boot setup command to enable Memory Write And
+   Invalidate.
+
+10.2.5  Ultra SCSI support
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+   Only apply to 860, 875, 895, 895a, 896, 1010 and 1010_66 controllers.
+   Have no effect with other ones.
+
+	=======    ========================
+        ultra:n    All ultra speeds enabled
+        ultra:2    Ultra2 enabled
+        ultra:1    Ultra enabled
+        ultra:0    Ultra speeds disabled
+	=======    ========================
+
+10.2.6  Default number of tagged commands
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+	======================= ===============================
+        tags:0     (or tags:1 ) tagged command queuing disabled
+        tags:#tags (#tags  > 1) tagged command queuing enabled
+	======================= ===============================
+
+  #tags will be truncated to the max queued commands configuration parameter.
+  This option also allows to specify a command queue depth for each device
+  that support tagged command queueing.
+
+  Example::
+
+      ncr53c8xx=tags:10/t2t3q16-t5q24/t1u2q32
+
+  will set devices queue depth as follow:
+
+      - controller #0 target #2 and target #3                  -> 16 commands,
+      - controller #0 target #5                                -> 24 commands,
+      - controller #1 target #1 logical unit #2                -> 32 commands,
+      - all other logical units (all targets, all controllers) -> 10 commands.
+
+10.2.7  Default synchronous period factor
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+============ ========================================================
+sync:255     disabled (asynchronous transfer mode)
+sync:#factor
+	     ============     =======================================
+	     #factor = 10     Ultra-2 SCSI 40 Mega-transfers / second
+	     #factor = 11     Ultra-2 SCSI 33 Mega-transfers / second
+	     #factor < 25     Ultra   SCSI 20 Mega-transfers / second
+	     #factor < 50     Fast    SCSI-2
+	     ============     =======================================
+============ ========================================================
+
+  In all cases, the driver will use the minimum transfer period supported by
+  controllers according to NCR53C8XX chip type.
+
+10.2.8  Negotiate synchronous with all devices
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+        (force sync nego)
+
+        =====      =========
+        fsn:y      enabled
+        fsn:n      disabled
+        =====      =========
+
+10.2.9  Verbosity level
+^^^^^^^^^^^^^^^^^^^^^^^
+
+        ======     =========
+        verb:0     minimal
+        verb:1     normal
+        verb:2     too much
+        ======     =========
+
+10.2.10 Debug mode
+^^^^^^^^^^^^^^^^^^
+
+========   ==================================================================
+debug:0    clear debug flags
+debug:#x   set debug flags
+
+	    #x is an integer value combining the following power-of-2 values:
+
+	    =============  ======
+	    DEBUG_ALLOC       0x1
+	    DEBUG_PHASE       0x2
+	    DEBUG_POLL        0x4
+	    DEBUG_QUEUE       0x8
+	    DEBUG_RESULT     0x10
+	    DEBUG_SCATTER    0x20
+	    DEBUG_SCRIPT     0x40
+	    DEBUG_TINY       0x80
+	    DEBUG_TIMING    0x100
+	    DEBUG_NEGO      0x200
+	    DEBUG_TAGS      0x400
+	    DEBUG_FREEZE    0x800
+	    DEBUG_RESTART  0x1000
+	    =============  ======
+========   ==================================================================
+
+  You can play safely with DEBUG_NEGO. However, some of these flags may
+  generate bunches of syslog messages.
+
+10.2.11 Burst max
+^^^^^^^^^^^^^^^^^
+
+=========  ==================================================================
+burst:0    burst disabled
+burst:255  get burst length from initial IO register settings.
+burst:#x   burst enabled (1<<#x burst transfers max)
+
+	   #x is an integer value which is log base 2 of the burst transfers
+	   max.
+
+	   The NCR53C875 and NCR53C825A support up to 128 burst transfers
+	   (#x = 7).
+
+	   Other chips only support up to 16 (#x = 4).
+
+	   This is a maximum value. The driver set the burst length according
+	   to chip and revision ids. By default the driver uses the maximum
+	   value supported by the chip.
+=========  ==================================================================
+
+10.2.12 LED support
+^^^^^^^^^^^^^^^^^^^
+
+        =====      ===================
+        led:1      enable  LED support
+        led:0      disable LED support
+        =====      ===================
+
+  Donnot enable LED support if your scsi board does not use SDMS BIOS.
+  (See 'Configuration parameters')
+
+10.2.13 Max wide
+^^^^^^^^^^^^^^^^
+
+        ======     ===================
+        wide:1      wide scsi enabled
+        wide:0      wide scsi disabled
+        ======     ===================
+
+  Some scsi boards use a 875 (ultra wide) and only supply narrow connectors.
+  If you have connected a wide device with a 50 pins to 68 pins cable
+  converter, any accepted wide negotiation will break further data transfers.
+  In such a case, using "wide:0" in the bootup command will be helpful.
+
+10.2.14 Differential mode
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+	======	=================================
+        diff:0	never set up diff mode
+        diff:1	set up diff mode if BIOS set it
+        diff:2	always set up diff mode
+        diff:3	set diff mode if GPIO3 is not set
+	======	=================================
+
+10.2.15 IRQ mode
+^^^^^^^^^^^^^^^^
+
+	=========  ========================================================
+        irqm:0     always open drain
+        irqm:1     same as initial settings (assumed BIOS settings)
+        irqm:2     always totem pole
+        irqm:0x10  driver will not use IRQF_SHARED flag when requesting irq
+	=========  ========================================================
+
+    (Bits 0x10 and 0x20 can be combined with hardware irq mode option)
+
+10.2.16 Reverse probe
+^^^^^^^^^^^^^^^^^^^^^
+
+	=========   ========================================================
+        revprob:n   probe chip ids from the PCI configuration in this order:
+                    810, 815, 820, 860, 875, 885, 895, 896
+        revprob:y   probe chip ids in the reverse order.
+	=========   ========================================================
+
+10.2.17 Fix up PCI configuration space
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+        pcifix:<option bits>
+
+    Available option bits:
+
+	===    ===============================================================
+        0x0    No attempt to fix PCI configuration space registers values.
+        0x1    Set PCI cache-line size register if not set.
+        0x2    Set write and invalidate bit in PCI command register.
+        0x4    Increase if necessary PCI latency timer according to burst max.
+	===    ===============================================================
+
+    Use 'pcifix:7' in order to allow the driver to fix up all PCI features.
+
+10.2.18 Serial NVRAM
+^^^^^^^^^^^^^^^^^^^^
+
+	=======     =========================================
+        nvram:n     do not look for serial NVRAM
+        nvram:y     test controllers for onboard serial NVRAM
+	=======     =========================================
+
+        (alternate binary form)
+        mvram=<bits options>
+
+        ====   =================================================================
+        0x01   look for NVRAM  (equivalent to nvram=y)
+        0x02   ignore NVRAM "Synchronous negotiation" parameters for all devices
+        0x04   ignore NVRAM "Wide negotiation"  parameter for all devices
+        0x08   ignore NVRAM "Scan at boot time" parameter for all devices
+        0x80   also attach controllers set to OFF in the NVRAM (sym53c8xx only)
+        ====   =================================================================
+
+10.2.19 Check SCSI BUS
+^^^^^^^^^^^^^^^^^^^^^^
+
+        buschk:<option bits>
+
+    Available option bits:
+
+        ====   ================================================
+        0x0:   No check.
+        0x1:   Check and do not attach the controller on error.
+        0x2:   Check and just warn on error.
+        0x4:   Disable SCSI bus integrity checking.
+        ====   ================================================
+
+10.2.20 Exclude a host from being attached
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+        excl=<io_address>
+
+    Prevent host at a given io address from being attached.
+    For example 'ncr53c8xx=excl:0xb400,excl:0xc000' indicate to the
+    ncr53c8xx driver not to attach hosts at address 0xb400 and 0xc000.
+
+10.2.21 Suggest a default SCSI id for hosts
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+	==========	==========================================
+        hostid:255	no id suggested.
+        hostid:#x	(0 < x < 7) x suggested for hosts SCSI id.
+	==========	==========================================
+
+    If a host SCSI id is available from the NVRAM, the driver will ignore
+    any value suggested as boot option. Otherwise, if a suggested value
+    different from 255 has been supplied, it will use it. Otherwise, it will
+    try to deduce the value previously set in the hardware and use value
+    7 if the hardware value is zero.
+
+10.2.22 Enable use of IMMEDIATE ARBITRATION
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+        (only supported by the sym53c8xx driver. See 10.7 for more details)
+
+=======   =================================================================
+iarb:0    do not use this feature.
+iarb:#x   use this feature according to bit fields as follow:
+
+	  ========= =======================================================
+	  bit 0 (1) enable IARB each time the initiator has been reselected
+		    when it arbitrated for the SCSI BUS.
+	  (#x >> 4) maximum number of successive settings of IARB if the
+		    initiator win arbitration and it has other commands
+		    to send to a device.
+	  ========= =======================================================
+=======   =================================================================
+
+Boot fail safe
+    safe:y	load the following assumed fail safe initial setup
+
+  ========================	======================	==========
+  master parity			disabled		mpar:n
+  scsi parity			enabled			spar:y
+  disconnections		not allowed		disc:n
+  special features		disabled		specf:n
+  ultra scsi			disabled		ultra:n
+  force sync negotiation	disabled		fsn:n
+  reverse probe			disabled		revprob:n
+  PCI fix up                    disabled                pcifix:0
+  serial NVRAM                  enabled                 nvram:y
+  verbosity level		2			verb:2
+  tagged command queuing	disabled		tags:0
+  synchronous negotiation	disabled		sync:255
+  debug flags			none			debug:0
+  burst length			from BIOS settings	burst:255
+  LED support			disabled		led:0
+  wide support			disabled		wide:0
+  settle time			10 seconds		settle:10
+  differential support		from BIOS settings	diff:1
+  irq mode			from BIOS settings	irqm:1
+  SCSI BUS check		do not attach on error	buschk:1
+  immediate arbitration		disabled		iarb:0
+  ========================	======================	==========
+
+10.3 Advised boot setup commands
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+If the driver has been configured with default options, the equivalent
+boot setup is::
+
+   ncr53c8xx=mpar:y,spar:y,disc:y,specf:3,fsn:n,ultra:2,fsn:n,revprob:n,verb:1\
+             tags:0,sync:50,debug:0,burst:7,led:0,wide:1,settle:2,diff:0,irqm:0
+
+For an installation diskette or a safe but not fast system,
+boot setup can be::
+
+    ncr53c8xx=safe:y,mpar:y,disc:y
+    ncr53c8xx=safe:y,disc:y
+    ncr53c8xx=safe:y,mpar:y
+    ncr53c8xx=safe:y
+
+My personal system works flawlessly with the following equivalent setup::
+
+   ncr53c8xx=mpar:y,spar:y,disc:y,specf:1,fsn:n,ultra:2,fsn:n,revprob:n,verb:1\
+             tags:32,sync:12,debug:0,burst:7,led:1,wide:1,settle:2,diff:0,irqm:0
+
+The driver prints its actual setup when verbosity level is 2. You can try
+"ncr53c8xx=verb:2" to get the "static" setup of the driver, or add "verb:2"
+to your boot setup command in order to check the actual setup the driver is
+using.
+
+10.4 PCI configuration fix-up boot option
+-----------------------------------------
+
+pcifix:<option bits>
+
+Available option bits:
+
+    ===      =====================================================
+    0x1      Set PCI cache-line size register if not set.
+    0x2      Set write and invalidate bit in PCI command register.
+    ===      =====================================================
+
+Use 'pcifix:3' in order to allow the driver to fix both PCI features.
+
+These options only apply to new SYMBIOS chips 810A, 825A, 860, 875
+and 895 and are only supported for Pentium and 486 class processors.
+Recent SYMBIOS 53C8XX scsi processors are able to use PCI read multiple
+and PCI write and invalidate commands. These features require the
+cache line size register to be properly set in the PCI configuration
+space of the chips. On the other hand, chips will use PCI write and
+invalidate commands only if the corresponding bit is set to 1 in the
+PCI command register.
+
+Not all PCI bioses set the PCI cache line register and the PCI write and
+invalidate bit in the PCI configuration space of 53C8XX chips.
+Optimized PCI accesses may be broken for some PCI/memory controllers or
+make problems with some PCI boards.
+
+This fix-up worked flawlessly on my previous system.
+(MB Triton HX / 53C875 / 53C810A)
+I use these options at my own risks as you will do if you decide to
+use them too.
+
+
+10.5 Serial NVRAM support boot option
+-------------------------------------
+
+=======     =========================================
+nvram:n     do not look for serial NVRAM
+nvram:y     test controllers for onboard serial NVRAM
+=======     =========================================
+
+This option can also been entered as an hexadecimal value that allows
+to control what information the driver will get from the NVRAM and what
+information it will ignore.
+For details see '17. Serial NVRAM support'.
+
+When this option is enabled, the driver tries to detect all boards using
+a Serial NVRAM. This memory is used to hold user set up parameters.
+
+The parameters the driver is able to get from the NVRAM depend on the
+data format used, as follow:
+
++-------------------------------+------------------+--------------+
+|                               |Tekram format     |Symbios format|
++-------------------------------+------------------+--------------+
+|General and host parameters    |                  |              |
++-------------------------------+------------------+--------------+
+|  * Boot order                 |        N         |       Y      |
++-------------------------------+------------------+--------------+
+|  * Host SCSI ID               |        Y         |       Y      |
++-------------------------------+------------------+--------------+
+|  * SCSI parity checking       |        Y         |       Y      |
++-------------------------------+------------------+--------------+
+|  * Verbose boot messages      |        N         |       Y      |
++-------------------------------+------------------+--------------+
+|SCSI devices parameters                                          |
++-------------------------------+------------------+--------------+
+|  * Synchronous transfer speed |        Y         |       Y      |
++-------------------------------+------------------+--------------+
+|  * Wide 16 / Narrow           |        Y         |       Y      |
++-------------------------------+------------------+--------------+
+|  * Tagged Command Queuing     |        Y         |       Y      |
+|    enabled                    |                  |              |
++-------------------------------+------------------+--------------+
+|  * Disconnections enabled     |        Y         |       Y      |
++-------------------------------+------------------+--------------+
+|  * Scan at boot time          |        N         |       Y      |
++-------------------------------+------------------+--------------+
+
+In order to speed up the system boot, for each device configured without
+the "scan at boot time" option, the driver forces an error on the
+first TEST UNIT READY command received for this device.
+
+Some SDMS BIOS revisions seem to be unable to boot cleanly with very fast
+hard disks. In such a situation you cannot configure the NVRAM with
+optimized parameters value.
+
+The 'nvram' boot option can be entered in hexadecimal form in order
+to ignore some options configured in the NVRAM, as follow:
+
+mvram=<bits options>
+
+      ====   =================================================================
+      0x01   look for NVRAM  (equivalent to nvram=y)
+      0x02   ignore NVRAM "Synchronous negotiation" parameters for all devices
+      0x04   ignore NVRAM "Wide negotiation"  parameter for all devices
+      0x08   ignore NVRAM "Scan at boot time" parameter for all devices
+      0x80   also attach controllers set to OFF in the NVRAM (sym53c8xx only)
+      ====   =================================================================
+
+Option 0x80 is only supported by the sym53c8xx driver and is disabled by
+default. Result is that, by default (option not set), the sym53c8xx driver
+will not attach controllers set to OFF in the NVRAM.
+
+The ncr53c8xx always tries to attach all the controllers. Option 0x80 has
+not been added to the ncr53c8xx driver, since it has been reported to
+confuse users who use this driver since a long time. If you desire a
+controller not to be attached by the ncr53c8xx driver at Linux boot, you
+must use the 'excl' driver boot option.
+
+10.6 SCSI BUS checking boot option.
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+When this option is set to a non-zero value, the driver checks SCSI lines
+logic state, 100 micro-seconds after having asserted the SCSI RESET line.
+The driver just reads SCSI lines and checks all lines read FALSE except RESET.
+Since SCSI devices shall release the BUS at most 800 nano-seconds after SCSI
+RESET has been asserted, any signal to TRUE may indicate a SCSI BUS problem.
+Unfortunately, the following common SCSI BUS problems are not detected:
+
+- Only 1 terminator installed.
+- Misplaced terminators.
+- Bad quality terminators.
+
+On the other hand, either bad cabling, broken devices, not conformant
+devices, ... may cause a SCSI signal to be wrong when te driver reads it.
+
+10.7 IMMEDIATE ARBITRATION boot option
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+This option is only supported by the SYM53C8XX driver (not by the NCR53C8XX).
+
+SYMBIOS 53C8XX chips are able to arbitrate for the SCSI BUS as soon as they
+have detected an expected disconnection (BUS FREE PHASE). For this process
+to be started, bit 1 of SCNTL1 IO register must be set when the chip is
+connected to the SCSI BUS.
+
+When this feature has been enabled for the current connection, the chip has
+every chance to win arbitration if only devices with lower priority are
+competing for the SCSI BUS. By the way, when the chip is using SCSI id 7,
+then it will for sure win the next SCSI BUS arbitration.
+
+Since, there is no way to know what devices are trying to arbitrate for the
+BUS, using this feature can be extremely unfair. So, you are not advised
+to enable it, or at most enable this feature for the case the chip lost
+the previous arbitration (boot option 'iarb:1').
+
+This feature has the following advantages:
+
+a) Allow the initiator with ID 7 to win arbitration when it wants so.
+b) Overlap at least 4 micro-seconds of arbitration time with the execution
+   of SCRIPTS that deal with the end of the current connection and that
+   starts the next job.
+
+Hmmm... But (a) may just prevent other devices from reselecting the initiator,
+and delay data transfers or status/completions, and (b) may just waste
+SCSI BUS bandwidth if the SCRIPTS execution lasts more than 4 micro-seconds.
+
+The use of IARB needs the SCSI_NCR_IARB_SUPPORT option to have been defined
+at compile time and the 'iarb' boot option to have been set to a non zero
+value at boot time. It is not that useful for real work, but can be used
+to stress SCSI devices or for some applications that can gain advantage of
+it. By the way, if you experience badnesses like 'unexpected disconnections',
+'bad reselections', etc... when using IARB on heavy IO load, you should not
+be surprised, because force-feeding anything and blocking its arse at the
+same time cannot work for a long time. :-))
+
+
+11. Some constants and flags of the ncr53c8xx.h header file
+===========================================================
+
+Some of these are defined from the configuration parameters.  To
+change other "defines", you must edit the header file.  Do that only
+if you know what you are doing.
+
+SCSI_NCR_SETUP_SPECIAL_FEATURES	(default: defined)
+	If defined, the driver will enable some special features according
+	to chip and revision id.
+
+        For 810A, 860, 825A, 875 and 895 scsi chips, this option enables
+	support of features that reduce load of PCI bus and memory accesses
+	during  scsi transfer processing: burst op-code fetch, read multiple,
+        read line, prefetch, cache line, write and invalidate,
+        burst 128 (875 only), large dma fifo (875 only), offset 16 (875 only).
+	Can be changed by the following boot setup command::
+
+		ncr53c8xx=specf:n
+
+SCSI_NCR_IOMAPPED		(default: not defined)
+	If defined, normal I/O is forced.
+
+SCSI_NCR_SHARE_IRQ		(default: defined)
+	If defined, request shared IRQ.
+
+SCSI_NCR_MAX_TAGS		(default: 8)
+	Maximum number of simultaneous tagged commands to a device.
+
+	Can be changed by "settags <target> <maxtags>"
+
+SCSI_NCR_SETUP_DEFAULT_SYNC     (default: 50)
+	Transfer period factor the driver will use at boot time for synchronous
+	negotiation. 0 means asynchronous.
+
+	Can be changed by "setsync <target> <period factor>"
+
+SCSI_NCR_SETUP_DEFAULT_TAGS     (default: 8)
+	Default number of simultaneous tagged commands to a device.
+
+	< 1 means tagged command queuing disabled at start-up.
+
+SCSI_NCR_ALWAYS_SIMPLE_TAG	(default: defined)
+	Use SIMPLE TAG for read and write commands.
+
+	Can be changed by "setorder <ordered|simple|default>"
+
+SCSI_NCR_SETUP_DISCONNECTION	(default: defined)
+	If defined, targets are allowed to disconnect.
+
+SCSI_NCR_SETUP_FORCE_SYNC_NEGO	(default: not defined)
+	If defined, synchronous negotiation is tried for all SCSI-2 devices.
+
+	Can be changed by "setsync <target> <period>"
+
+SCSI_NCR_SETUP_MASTER_PARITY	(default: defined)
+	If defined, master parity checking is enabled.
+
+SCSI_NCR_SETUP_SCSI_PARITY	(default: defined)
+	If defined, SCSI parity checking is enabled.
+
+SCSI_NCR_PROFILE_SUPPORT	(default: not defined)
+	If defined, profiling information is gathered.
+
+SCSI_NCR_MAX_SCATTER		(default: 128)
+	Scatter list size of the driver ccb.
+
+SCSI_NCR_MAX_TARGET		(default: 16)
+	Max number of targets per host.
+
+SCSI_NCR_MAX_HOST		(default: 2)
+	Max number of host controllers.
+
+SCSI_NCR_SETTLE_TIME		(default: 2)
+	Number of seconds the driver will wait after reset.
+
+SCSI_NCR_TIMEOUT_ALERT		(default: 3)
+	If a pending command will time out after this amount of seconds,
+	an ordered tag is used for the next command.
+
+	Avoids timeouts for unordered tagged commands.
+
+SCSI_NCR_CAN_QUEUE		(default: 7*SCSI_NCR_MAX_TAGS)
+	Max number of commands that can be queued to a host.
+
+SCSI_NCR_CMD_PER_LUN		(default: SCSI_NCR_MAX_TAGS)
+	Max number of commands queued to a host for a device.
+
+SCSI_NCR_SG_TABLESIZE		(default: SCSI_NCR_MAX_SCATTER-1)
+	Max size of the Linux scatter/gather list.
+
+SCSI_NCR_MAX_LUN	(default: 8)
+	Max number of LUNs per target.
+
+
+12. Installation
+================
+
+This driver is part of the linux kernel distribution.
+Driver files are located in the sub-directory "drivers/scsi" of the
+kernel source tree.
+
+Driver files::
+
+	README.ncr53c8xx	: this file
+	ChangeLog.ncr53c8xx	: change log
+	ncr53c8xx.h		: definitions
+	ncr53c8xx.c		: the driver code
+
+New driver versions are made available separately in order to allow testing
+changes and new features prior to including them into the linux kernel
+distribution. The following URL provides information on latest available
+patches:
+
+      ftp://ftp.tux.org/pub/people/gerard-roudier/README
+
+
+13. Architecture dependent features
+===================================
+
+<Not yet written>
+
+
+14. Known problems
+==================
+
+14.1 Tagged commands with Iomega Jaz device
+-------------------------------------------
+
+I have not tried this device, however it has been reported to me the
+following: This device is capable of Tagged command queuing. However
+while spinning up, it rejects Tagged commands. This behaviour is
+conforms to 6.8.2 of SCSI-2 specifications. The current behaviour of
+the driver in that situation is not satisfying. So do not enable
+Tagged command queuing for devices that are able to spin down.  The
+other problem that may appear is timeouts. The only way to avoid
+timeouts seems to edit linux/drivers/scsi/sd.c and to increase the
+current timeout values.
+
+14.2 Device names change when another controller is added
+---------------------------------------------------------
+
+When you add a new NCR53C8XX chip based controller to a system that already
+has one or more controllers of this family, it may happen that the order
+the driver registers them to the kernel causes problems due to device
+name changes.
+When at least one controller uses NvRAM, SDMS BIOS version 4 allows you to
+define the order the BIOS will scan the scsi boards. The driver attaches
+controllers according to BIOS information if NvRAM detect option is set.
+
+If your controllers do not have NvRAM, you can:
+
+- Ask the driver to probe chip ids in reverse order from the boot command
+  line: ncr53c8xx=revprob:y
+- Make appropriate changes in the fstab.
+- Use the 'scsidev' tool from Eric Youngdale.
+
+14.3 Using only 8 bit devices with a WIDE SCSI controller
+---------------------------------------------------------
+
+When only 8 bit NARROW devices are connected to a 16 bit WIDE SCSI controller,
+you must ensure that lines of the wide part of the SCSI BUS are pulled-up.
+This can be achieved by ENABLING the WIDE TERMINATOR portion of the SCSI
+controller card.
+
+The TYAN 1365 documentation revision 1.2 is not correct about such settings.
+(page 10, figure 3.3).
+
+14.4 Possible data corruption during a Memory Write and Invalidate
+------------------------------------------------------------------
+
+This problem is described in SYMBIOS DEL 397, Part Number 69-039241, ITEM 4.
+
+In some complex situations, 53C875 chips revision <= 3 may start a PCI
+Write and Invalidate Command at a not cache-line-aligned 4 DWORDS boundary.
+This is only possible when Cache Line Size is 8 DWORDS or greater.
+Pentium systems use a 8 DWORDS cache line size and so are concerned by
+this chip bug, unlike i486 systems that use a 4 DWORDS cache line size.
+
+When this situation occurs, the chip may complete the Write and Invalidate
+command after having only filled part of the last cache line involved in
+the transfer, leaving to data corruption the remainder of this cache line.
+
+Not using Write And Invalidate obviously gets rid of this chip bug, and so
+it is now the default setting of the driver.
+However, for people like me who want to enable this feature, I have added
+part of a work-around suggested by SYMBIOS. This work-around resets the
+addressing logic when the DATA IN phase is entered and so prevents the bug
+from being triggered for the first SCSI MOVE of the phase. This work-around
+should be enough according to the following:
+
+The only driver internal data structure that is greater than 8 DWORDS  and
+that is moved by the SCRIPTS processor is the 'CCB header' that contains
+the context of the SCSI transfer. This data structure is aligned on 8 DWORDS
+boundary (Pentium Cache Line Size), and so is immune to this chip bug, at
+least on Pentium systems.
+
+But the conditions of this bug can be met when a SCSI read command is
+performed using a buffer that is 4 DWORDS but not cache-line aligned.
+This cannot happen under Linux when scatter/gather lists are used since
+they only refer to system buffers that are well aligned. So, a work around
+may only be needed under Linux when a scatter/gather list is not used and
+when the SCSI DATA IN phase is reentered after a phase mismatch.
+
+15. SCSI problem troubleshooting
+================================
+
+15.1 Problem tracking
+---------------------
+
+Most SCSI problems are due to a non conformant SCSI bus or to buggy
+devices.  If unfortunately you have SCSI problems, you can check the
+following things:
+
+- SCSI bus cables
+- terminations at both end of the SCSI chain
+- linux syslog messages (some of them may help you)
+
+If you do not find the source of problems, you can configure the
+driver with no features enabled.
+
+- only asynchronous data transfers
+- tagged commands disabled
+- disconnections not allowed
+
+Now, if your SCSI bus is ok, your system have every chance to work
+with this safe configuration but performances will not be optimal.
+
+If it still fails, then you can send your problem description to
+appropriate mailing lists or news-groups.  Send me a copy in order to
+be sure I will receive it.  Obviously, a bug in the driver code is
+possible.
+
+     My email address: Gerard Roudier <groudier@free.fr>
+
+Allowing disconnections is important if you use several devices on
+your SCSI bus but often causes problems with buggy devices.
+Synchronous data transfers increases throughput of fast devices like
+hard disks.  Good SCSI hard disks with a large cache gain advantage of
+tagged commands queuing.
+
+Try to enable one feature at a time with control commands.  For example:
+
+::
+
+    echo "setsync all 25" >/proc/scsi/ncr53c8xx/0
+
+Will enable fast synchronous data transfer negotiation for all targets.
+
+::
+
+    echo "setflag 3" >/proc/scsi/ncr53c8xx/0
+
+Will reset flags (no_disc) for target 3, and so will allow it to disconnect
+the SCSI Bus.
+
+::
+
+    echo "settags 3 8" >/proc/scsi/ncr53c8xx/0
+
+Will enable tagged command queuing for target 3 if that device supports it.
+
+Once you have found the device and the feature that cause problems, just
+disable that feature for that device.
+
+15.2 Understanding hardware error reports
+-----------------------------------------
+
+When the driver detects an unexpected error condition, it may display a
+message of the following pattern::
+
+    sym53c876-0:1: ERROR (0:48) (1-21-65) (f/95) @ (script 7c0:19000000).
+    sym53c876-0: script cmd = 19000000
+    sym53c876-0: regdump: da 10 80 95 47 0f 01 07 75 01 81 21 80 01 09 00.
+
+Some fields in such a message may help you understand the cause of the
+problem, as follows::
+
+    sym53c876-0:1: ERROR (0:48) (1-21-65) (f/95) @ (script 7c0:19000000).
+    ............A.........B.C....D.E..F....G.H.......I.....J...K.......
+
+Field A : target number.
+  SCSI ID of the device the controller was talking with at the moment the
+  error occurs.
+
+Field B : DSTAT io register (DMA STATUS)
+  ========   =============================================================
+  Bit 0x40   MDPE Master Data Parity Error
+             Data parity error detected on the PCI BUS.
+  Bit 0x20   BF   Bus Fault
+             PCI bus fault condition detected
+  Bit 0x01   IID  Illegal Instruction Detected
+             Set by the chip when it detects an Illegal Instruction format
+             on some condition that makes an instruction illegal.
+  Bit 0x80   DFE Dma Fifo Empty
+             Pure status bit that does not indicate an error.
+  ========   =============================================================
+
+  If the reported DSTAT value contains a combination of MDPE (0x40),
+  BF (0x20), then the cause may be likely due to a PCI BUS problem.
+
+Field C : SIST io register (SCSI Interrupt Status)
+  ========   ==================================================================
+  Bit 0x08   SGE  SCSI GROSS ERROR
+             Indicates that the chip detected a severe error condition
+             on the SCSI BUS that prevents the SCSI protocol from functioning
+             properly.
+  Bit 0x04   UDC  Unexpected Disconnection
+             Indicates that the device released the SCSI BUS when the chip
+             was not expecting this to happen. A device may behave so to
+             indicate the SCSI initiator that an error condition not reportable
+             using the SCSI protocol has occurred.
+  Bit 0x02   RST  SCSI BUS Reset
+             Generally SCSI targets do not reset the SCSI BUS, although any
+             device on the BUS can reset it at any time.
+  Bit 0x01   PAR  Parity
+             SCSI parity error detected.
+  ========   ==================================================================
+
+  On a faulty SCSI BUS, any error condition among SGE (0x08), UDC (0x04) and
+  PAR (0x01) may be detected by the chip. If your SCSI system sometimes
+  encounters such error conditions, especially SCSI GROSS ERROR, then a SCSI
+  BUS problem is likely the cause of these errors.
+
+For fields D,E,F,G and H, you may look into the sym53c8xx_defs.h file
+that contains some minimal comments on IO register bits.
+
+Field D : SOCL  Scsi Output Control Latch
+          This register reflects the state of the SCSI control lines the
+          chip want to drive or compare against.
+
+Field E : SBCL  Scsi Bus Control Lines
+          Actual value of control lines on the SCSI BUS.
+
+Field F : SBDL  Scsi Bus Data Lines
+          Actual value of data lines on the SCSI BUS.
+
+Field G : SXFER  SCSI Transfer
+          Contains the setting of the Synchronous Period for output and
+          the current Synchronous offset (offset 0 means asynchronous).
+
+Field H : SCNTL3 Scsi Control Register 3
+          Contains the setting of timing values for both asynchronous and
+          synchronous data transfers.
+
+Understanding Fields I, J, K and dumps requires to have good knowledge of
+SCSI standards, chip cores functionnals and internal driver data structures.
+You are not required to decode and understand them, unless you want to help
+maintain the driver code.
+
+16. Synchronous transfer negotiation tables
+===========================================
+
+Tables below have been created by calling the routine the driver uses
+for synchronisation negotiation timing calculation and chip setting.
+The first table corresponds to Ultra chips 53875 and 53C860 with 80 MHz
+clock and 5 clock divisors.
+The second one has been calculated by setting the scsi clock to 40 Mhz
+and using 4 clock divisors and so applies to all NCR53C8XX chips in fast
+SCSI-2 mode.
+
+Periods are in nano-seconds and speeds are in Mega-transfers per second.
+1 Mega-transfers/second means 1 MB/s with 8 bits SCSI and 2 MB/s with
+Wide16 SCSI.
+
+16.1 Synchronous timings for 53C895, 53C875 and 53C860 SCSI controllers
+
++-----------------------------+--------+-------+--------------+
+|Negotiated                   |NCR settings    |              |
++-------+--------+------------+--------+-------+              |
+|Factor |Period  |Speed       |Period  |Speed  |              |
++-------+--------+------------+--------+-------+--------------+
+|10     | 25     |40.000      | 25     |40.000 | (53C895 only)|
++-------+--------+------------+--------+-------+--------------+
+|11     | 30.2   |33.112      | 31.25  |32.000 | (53C895 only)|
++-------+--------+------------+--------+-------+--------------+
+|12     | 50     |20.000      | 50     |20.000 |              |
++-------+--------+------------+--------+-------+--------------+
+|13     | 52     |19.230      | 62     |16.000 |              |
++-------+--------+------------+--------+-------+--------------+
+|14     | 56     |17.857      | 62     |16.000 |              |
++-------+--------+------------+--------+-------+--------------+
+|15     | 60     |16.666      | 62     |16.000 |              |
++-------+--------+------------+--------+-------+--------------+
+|16     | 64     |15.625      | 75     |13.333 |              |
++-------+--------+------------+--------+-------+--------------+
+|17     | 68     |14.705      | 75     |13.333 |              |
++-------+--------+------------+--------+-------+--------------+
+|18     | 72     |13.888      | 75     |13.333 |              |
++-------+--------+------------+--------+-------+--------------+
+|19     | 76     |13.157      | 87     |11.428 |              |
++-------+--------+------------+--------+-------+--------------+
+|20     | 80     |12.500      | 87     |11.428 |              |
++-------+--------+------------+--------+-------+--------------+
+|21     | 84     |11.904      | 87     |11.428 |              |
++-------+--------+------------+--------+-------+--------------+
+|22     | 88     |11.363      | 93     |10.666 |              |
++-------+--------+------------+--------+-------+--------------+
+|23     | 92     |10.869      | 93     |10.666 |              |
++-------+--------+------------+--------+-------+--------------+
+|24     | 96     |10.416      |100     |10.000 |              |
++-------+--------+------------+--------+-------+--------------+
+|25     |100     |10.000      |100     |10.000 |              |
++-------+--------+------------+--------+-------+--------------+
+|26     |104     | 9.615      |112     | 8.888 |              |
++-------+--------+------------+--------+-------+--------------+
+|27     |108     | 9.259      |112     | 8.888 |              |
++-------+--------+------------+--------+-------+--------------+
+|28     |112     | 8.928      |112     | 8.888 |              |
++-------+--------+------------+--------+-------+--------------+
+|29     |116     | 8.620      |125     | 8.000 |              |
++-------+--------+------------+--------+-------+--------------+
+|30     |120     | 8.333      |125     | 8.000 |              |
++-------+--------+------------+--------+-------+--------------+
+|31     |124     | 8.064      |125     | 8.000 |              |
++-------+--------+------------+--------+-------+--------------+
+|32     |128     | 7.812      |131     | 7.619 |              |
++-------+--------+------------+--------+-------+--------------+
+|33     |132     | 7.575      |150     | 6.666 |              |
++-------+--------+------------+--------+-------+--------------+
+|34     |136     | 7.352      |150     | 6.666 |              |
++-------+--------+------------+--------+-------+--------------+
+|35     |140     | 7.142      |150     | 6.666 |              |
++-------+--------+------------+--------+-------+--------------+
+|36     |144     | 6.944      |150     | 6.666 |              |
++-------+--------+------------+--------+-------+--------------+
+|37     |148     | 6.756      |150     | 6.666 |              |
++-------+--------+------------+--------+-------+--------------+
+|38     |152     | 6.578      |175     | 5.714 |              |
++-------+--------+------------+--------+-------+--------------+
+|39     |156     | 6.410      |175     | 5.714 |              |
++-------+--------+------------+--------+-------+--------------+
+|40     |160     | 6.250      |175     | 5.714 |              |
++-------+--------+------------+--------+-------+--------------+
+|41     |164     | 6.097      |175     | 5.714 |              |
++-------+--------+------------+--------+-------+--------------+
+|42     |168     | 5.952      |175     | 5.714 |              |
++-------+--------+------------+--------+-------+--------------+
+|43     |172     | 5.813      |175     | 5.714 |              |
++-------+--------+------------+--------+-------+--------------+
+|44     |176     | 5.681      |187     | 5.333 |              |
++-------+--------+------------+--------+-------+--------------+
+|45     |180     | 5.555      |187     | 5.333 |              |
++-------+--------+------------+--------+-------+--------------+
+|46     |184     | 5.434      |187     | 5.333 |              |
++-------+--------+------------+--------+-------+--------------+
+|47     |188     | 5.319      |200     | 5.000 |              |
++-------+--------+------------+--------+-------+--------------+
+|48     |192     | 5.208      |200     | 5.000 |              |
++-------+--------+------------+--------+-------+--------------+
+|49     |196     | 5.102      |200     | 5.000 |              |
++-------+--------+------------+--------+-------+--------------+
+
+16.2 Synchronous timings for fast SCSI-2 53C8XX controllers
+
++-----------------------------+----------------+
+|Negotiated                   |NCR settings    |
++-------+--------+------------+--------+-------+
+|Factor |Period  |Speed       |Period  |Speed  |
++-------+--------+------------+--------+-------+
+|25     |100     |10.000      |100     |10.000 |
++-------+--------+------------+--------+-------+
+|26     |104     |9.615       |125     | 8.000 |
++-------+--------+------------+--------+-------+
+|27     |108     |9.259       |125     | 8.000 |
++-------+--------+------------+--------+-------+
+|28     |112     |8.928       |125     | 8.000 |
++-------+--------+------------+--------+-------+
+|29     |116     |8.620       |125     | 8.000 |
++-------+--------+------------+--------+-------+
+|30     |120     |8.333       |125     | 8.000 |
++-------+--------+------------+--------+-------+
+|31     |124     |8.064       |125     | 8.000 |
++-------+--------+------------+--------+-------+
+|32     |128     |7.812       |131     | 7.619 |
++-------+--------+------------+--------+-------+
+|33     |132     |7.575       |150     | 6.666 |
++-------+--------+------------+--------+-------+
+|34     |136     |7.352       |150     | 6.666 |
++-------+--------+------------+--------+-------+
+|35     |140     |7.142       |150     | 6.666 |
++-------+--------+------------+--------+-------+
+|36     |144     |6.944       |150     | 6.666 |
++-------+--------+------------+--------+-------+
+|37     |148     |6.756       |150     | 6.666 |
++-------+--------+------------+--------+-------+
+|38     |152     |6.578       |175     | 5.714 |
++-------+--------+------------+--------+-------+
+|39     |156     |6.410       |175     | 5.714 |
++-------+--------+------------+--------+-------+
+|40     |160     |6.250       |175     | 5.714 |
++-------+--------+------------+--------+-------+
+|41     |164     |6.097       |175     | 5.714 |
++-------+--------+------------+--------+-------+
+|42     |168     |5.952       |175     | 5.714 |
++-------+--------+------------+--------+-------+
+|43     |172     |5.813       |175     | 5.714 |
++-------+--------+------------+--------+-------+
+|44     |176     |5.681       |187     | 5.333 |
++-------+--------+------------+--------+-------+
+|45     |180     |5.555       |187     | 5.333 |
++-------+--------+------------+--------+-------+
+|46     |184     |5.434       |187     | 5.333 |
++-------+--------+------------+--------+-------+
+|47     |188     |5.319       |200     | 5.000 |
++-------+--------+------------+--------+-------+
+|48     |192     |5.208       |200     | 5.000 |
++-------+--------+------------+--------+-------+
+|49     |196     |5.102       |200     | 5.000 |
++-------+--------+------------+--------+-------+
+
+
+17. Serial NVRAM
+================
+
+(added by Richard Waltham: dormouse@farsrobt.demon.co.uk)
+
+17.1 Features
+-------------
+
+Enabling serial NVRAM support enables detection of the serial NVRAM included
+on Symbios and some Symbios compatible host adaptors, and Tekram boards. The
+serial NVRAM is used by Symbios and Tekram to hold set up parameters for the
+host adaptor and its attached drives.
+
+The Symbios NVRAM also holds data on the boot order of host adaptors in a
+system with more than one host adaptor. This enables the order of scanning
+the cards for drives to be changed from the default used during host adaptor
+detection.
+
+This can be done to a limited extent at the moment using "reverse probe" but
+this only changes the order of detection of different types of cards. The
+NVRAM boot order settings can do this as well as change the order the same
+types of cards are scanned in, something "reverse probe" cannot do.
+
+Tekram boards using Symbios chips, DC390W/F/U, which have NVRAM are detected
+and this is used to distinguish between Symbios compatible and Tekram host
+adaptors. This is used to disable the Symbios compatible "diff" setting
+incorrectly set on Tekram boards if the CONFIG_SCSI_53C8XX_SYMBIOS_COMPAT
+configuration parameter is set enabling both Symbios and Tekram boards to be
+used together with the Symbios cards using all their features, including
+"diff" support. ("led pin" support for Symbios compatible cards can remain
+enabled when using Tekram cards. It does nothing useful for Tekram host
+adaptors but does not cause problems either.)
+
+
+17.2 Symbios NVRAM layout
+-------------------------
+
+typical data at NVRAM address 0x100 (53c810a NVRAM)::
+
+    00 00
+    64 01
+    8e 0b
+
+    00 30 00 00 00 00 07 00 00 00 00 00 00 00 07 04 10 04 00 00
+
+    04 00 0f 00 00 10 00 50 00 00 01 00 00 62
+    04 00 03 00 00 10 00 58 00 00 01 00 00 63
+    04 00 01 00 00 10 00 48 00 00 01 00 00 61
+    00 00 00 00 00 00 00 00 00 00 00 00 00 00
+
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+
+    00 00 00 00 00 00 00 00
+    00 00 00 00 00 00 00 00
+    00 00 00 00 00 00 00 00
+    00 00 00 00 00 00 00 00
+    00 00 00 00 00 00 00 00
+    00 00 00 00 00 00 00 00
+    00 00 00 00 00 00 00 00
+    00 00 00 00 00 00 00 00
+
+    00 00 00 00 00 00 00 00
+    00 00 00 00 00 00 00 00
+    00 00 00 00 00 00 00 00
+    00 00 00 00 00 00 00 00
+    00 00 00 00 00 00 00 00
+    00 00 00 00 00 00 00 00
+    00 00 00 00 00 00 00 00
+    00 00 00 00 00 00 00 00
+
+    00 00 00 00 00 00 00 00
+    00 00 00 00 00 00 00 00
+    00 00 00 00 00 00 00 00
+
+    fe fe
+    00 00
+    00 00
+
+NVRAM layout details
+
+=============  ================
+NVRAM Address
+=============  ================
+0x000-0x0ff    not used
+0x100-0x26f    initialised data
+0x270-0x7ff    not used
+=============  ================
+
+general layout::
+
+        header  -   6 bytes,
+        data    - 356 bytes (checksum is byte sum of this data)
+        trailer -   6 bytes
+                  ---
+        total     368 bytes
+
+data area layout::
+
+        controller set up  -  20 bytes
+        boot configuration -  56 bytes (4x14 bytes)
+        device set up      - 128 bytes (16x8 bytes)
+        unused (spare?)    - 152 bytes (19x8 bytes)
+                             ---
+        total                356 bytes
+
+header::
+
+    00 00   - ?? start marker
+    64 01   - byte count (lsb/msb excludes header/trailer)
+    8e 0b   - checksum (lsb/msb excludes header/trailer)
+
+controller set up::
+
+    00 30 00 00 00 00 07 00 00 00 00 00 00 00 07 04 10 04 00 00
+		    |     |           |     |
+		    |     |           |      -- host ID
+		    |     |           |
+		    |     |            --Removable Media Support
+		    |     |               0x00 = none
+		    |     |               0x01 = Bootable Device
+		    |     |               0x02 = All with Media
+		    |     |
+		    |      --flag bits 2
+		    |        0x00000001= scan order hi->low
+		    |            (default 0x00 - scan low->hi)
+			--flag bits 1
+			0x00000001 scam enable
+			0x00000010 parity enable
+			0x00000100 verbose boot msgs
+
+remaining bytes unknown - they do not appear to change in my
+current set up for any of the controllers.
+
+default set up is identical for 53c810a and 53c875 NVRAM
+(Removable Media added Symbios BIOS version 4.09)
+
+boot configuration
+
+boot order set by order of the devices in this table::
+
+    04 00 0f 00 00 10 00 50 00 00 01 00 00 62 -- 1st controller
+    04 00 03 00 00 10 00 58 00 00 01 00 00 63    2nd controller
+    04 00 01 00 00 10 00 48 00 00 01 00 00 61    3rd controller
+    00 00 00 00 00 00 00 00 00 00 00 00 00 00    4th controller
+	|  |  |  |     |        |     |  |
+	|  |  |  |     |        |      ---- PCI io port adr
+	|  |  |  |     |         --0x01 init/scan at boot time
+	|  |  |  |      --PCI device/function number (0xdddddfff)
+	|  |   ----- ?? PCI vendor ID (lsb/msb)
+	    ----PCI device ID (lsb/msb)
+
+    ?? use of this data is a guess but seems reasonable
+
+remaining bytes unknown - they do not appear to change in my
+current set up
+
+default set up is identical for 53c810a and 53c875 NVRAM
+--------------------------------------------------------
+
+device set up (up to 16 devices - includes controller)::
+
+    0f 00 08 08 64 00 0a 00 - id 0
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00 - id 15
+    |     |  |  |     |  |
+    |     |  |  |      ----timeout (lsb/msb)
+    |     |  |   --synch period (0x?? 40 Mtrans/sec- fast 40) (probably 0x28)
+    |     |  |                  (0x30 20 Mtrans/sec- fast 20)
+    |     |  |                  (0x64 10 Mtrans/sec- fast )
+    |     |  |                  (0xc8  5 Mtrans/sec)
+    |     |  |                  (0x00  asynchronous)
+    |     |   -- ?? max sync offset (0x08 in NVRAM on 53c810a)
+    |     |                         (0x10 in NVRAM on 53c875)
+    |      --device bus width (0x08 narrow)
+    |                         (0x10 16 bit wide)
+    --flag bits
+	0x00000001 - disconnect enabled
+	0x00000010 - scan at boot time
+	0x00000100 - scan luns
+	0x00001000 - queue tags enabled
+
+remaining bytes unknown - they do not appear to change in my
+current set up
+
+?? use of this data is a guess but seems reasonable
+(but it could be max bus width)
+
+default set up for 53c810a NVRAM
+default set up for 53c875 NVRAM
+
+				- bus width     - 0x10
+                                - sync offset ? - 0x10
+                                - sync period   - 0x30
+
+?? spare device space (32 bit bus ??)
+
+::
+
+    00 00 00 00 00 00 00 00  (19x8bytes)
+    .
+    .
+    00 00 00 00 00 00 00 00
+
+default set up is identical for 53c810a and 53c875 NVRAM
+--------------------------------------------------------
+
+trailer::
+
+    fe fe   - ? end marker ?
+    00 00
+    00 00
+
+default set up is identical for 53c810a and 53c875 NVRAM
+-----------------------------------------------------------
+
+
+
+17.3 Tekram NVRAM layout
+------------------------
+
+nvram 64x16 (1024 bit)
+
+Drive settings::
+
+    Drive ID 0-15 (addr 0x0yyyy0 = device setup, yyyy = ID)
+		(addr 0x0yyyy1 = 0x0000)
+
+	x x x x  x x x x  x x x x  x x x x
+		| | |      | |  | | | |
+		| | |      | |  | | |  ----- parity check   0 - off
+		| | |      | |  | | |                       1 - on
+		| | |      | |  | | |
+		| | |      | |  | |  ------- sync neg       0 - off
+		| | |      | |  | |                         1 - on
+		| | |      | |  | |
+		| | |      | |  |  --------- disconnect     0 - off
+		| | |      | |  |                           1 - on
+		| | |      | |  |
+		| | |      | |   ----------- start cmd      0 - off
+		| | |      | |                              1 - on
+		| | |      | |
+		| | |      |  -------------- tagged cmds    0 - off
+		| | |      |                                1 - on
+		| | |      |
+		| | |       ---------------- wide neg       0 - off
+		| | |                                       1 - on
+		| | |
+		    --------------------------- sync rate      0 - 10.0 Mtrans/sec
+							    1 -  8.0
+							    2 -  6.6
+							    3 -  5.7
+							    4 -  5.0
+							    5 -  4.0
+							    6 -  3.0
+							    7 -  2.0
+							    7 -  2.0
+							    8 - 20.0
+							    9 - 16.7
+							    a - 13.9
+							    b - 11.9
+
+Global settings
+
+Host flags 0 (addr 0x100000, 32)::
+
+    x x x x  x x x x  x x x x  x x x x
+    | | | |  | | | |           | | | |
+    | | | |  | | | |            ----------- host ID    0x00 - 0x0f
+    | | | |  | | | |
+    | | | |  | | |  ----------------------- support for    0 - off
+    | | | |  | | |                          > 2 drives     1 - on
+    | | | |  | | |
+    | | | |  | |  ------------------------- support drives 0 - off
+    | | | |  | |                            > 1Gbytes      1 - on
+    | | | |  | |
+    | | | |  |  --------------------------- bus reset on   0 - off
+    | | | |  |                                power on     1 - on
+    | | | |  |
+    | | | |   ----------------------------- active neg     0 - off
+    | | | |                                                1 - on
+    | | | |
+    | | |  -------------------------------- imm seek       0 - off
+    | | |                                                  1 - on
+    | | |
+    | |  ---------------------------------- scan luns      0 - off
+    | |                                                    1 - on
+    | |
+     -------------------------------------- removable      0 - disable
+                                            as BIOS dev    1 - boot device
+                                                           2 - all
+
+Host flags 1 (addr 0x100001, 33)::
+
+    x x x x  x x x x  x x x x  x x x x
+               | | |             | | |
+               | | |              --------- boot delay     0 -   3 sec
+               | | |                                       1 -   5
+               | | |                                       2 -  10
+               | | |                                       3 -  20
+               | | |                                       4 -  30
+               | | |                                       5 -  60
+               | | |                                       6 - 120
+               | | |
+                --------------------------- max tag cmds   0 -  2
+                                                           1 -  4
+                                                           2 -  8
+                                                           3 - 16
+                                                           4 - 32
+
+Host flags 2 (addr 0x100010, 34)::
+
+    x x x x  x x x x  x x x x  x x x x
+                                     |
+                                      ----- F2/F6 enable   0 - off ???
+                                                           1 - on  ???
+
+checksum (addr 0x111111)
+
+checksum = 0x1234 - (sum addr 0-63)
+
+----------------------------------------------------------------------------
+
+default nvram data::
+
+    0x0037 0x0000 0x0037 0x0000 0x0037 0x0000 0x0037 0x0000
+    0x0037 0x0000 0x0037 0x0000 0x0037 0x0000 0x0037 0x0000
+    0x0037 0x0000 0x0037 0x0000 0x0037 0x0000 0x0037 0x0000
+    0x0037 0x0000 0x0037 0x0000 0x0037 0x0000 0x0037 0x0000
+
+    0x0f07 0x0400 0x0001 0x0000 0x0000 0x0000 0x0000 0x0000
+    0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
+    0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
+    0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0xfbbc
+
+
+18. Support for Big Endian
+==========================
+
+The PCI local bus has been primarily designed for x86 architecture.
+As a consequence, PCI devices generally expect DWORDS using little endian
+byte ordering.
+
+18.1 Big Endian CPU
+-------------------
+
+In order to support NCR chips on a Big Endian architecture the driver has to
+perform byte reordering each time it is needed. This feature has been
+added to the driver by Cort <cort@cs.nmt.edu> and is available in driver
+version 2.5 and later ones. For the moment Big Endian support has only
+been tested on Linux/PPC (PowerPC).
+
+18.2 NCR chip in Big Endian mode of operations
+----------------------------------------------
+
+It can be read in SYMBIOS documentation that some chips support a special
+Big Endian mode, on paper: 53C815, 53C825A, 53C875, 53C875N, 53C895.
+This mode of operations is not software-selectable, but needs pin named
+BigLit to be pulled-up. Using this mode, most of byte reorderings should
+be avoided when the driver is running on a Big Endian CPU.
+Driver version 2.5 is also, in theory, ready for this feature.
diff --git a/Documentation/scsi/ncr53c8xx.txt b/Documentation/scsi/ncr53c8xx.txt
deleted file mode 100644
index 8586eff..0000000
--- a/Documentation/scsi/ncr53c8xx.txt
+++ /dev/null
@@ -1,1824 +0,0 @@
-The Linux NCR53C8XX/SYM53C8XX drivers README file
-
-Written by Gerard Roudier <groudier@free.fr>
-21 Rue Carnot
-95170 DEUIL LA BARRE - FRANCE
-
-29 May 1999
-===============================================================================
-
-1.  Introduction
-2.  Supported chips and SCSI features
-3.  Advantages of the enhanced 896 driver
-      3.1 Optimized SCSI SCRIPTS
-      3.2 New features of the SYM53C896 (64 bit PCI dual LVD SCSI controller)
-4.  Memory mapped I/O versus normal I/O
-5.  Tagged command queueing
-6.  Parity checking
-7.  Profiling information
-8.  Control commands
-      8.1  Set minimum synchronous period
-      8.2  Set wide size
-      8.3  Set maximum number of concurrent tagged commands
-      8.4  Set order type for tagged command
-      8.5  Set debug mode
-      8.6  Clear profile counters
-      8.7  Set flag (no_disc)
-      8.8  Set verbose level
-      8.9  Reset all logical units of a target
-      8.10 Abort all tasks of all logical units of a target
-9.  Configuration parameters
-10. Boot setup commands
-      10.1 Syntax
-      10.2 Available arguments
-             10.2.1  Master parity checking
-             10.2.2  Scsi parity checking
-             10.2.3  Scsi disconnections
-             10.2.4  Special features
-             10.2.5  Ultra SCSI support
-             10.2.6  Default number of tagged commands
-             10.2.7  Default synchronous period factor
-             10.2.8  Negotiate synchronous with all devices
-             10.2.9  Verbosity level
-             10.2.10 Debug mode
-             10.2.11 Burst max
-             10.2.12 LED support
-             10.2.13 Max wide
-             10.2.14 Differential mode
-             10.2.15 IRQ mode
-             10.2.16 Reverse probe
-             10.2.17 Fix up PCI configuration space
-             10.2.18 Serial NVRAM
-             10.2.19 Check SCSI BUS 
-             10.2.20 Exclude a host from being attached
-             10.2.21 Suggest a default SCSI id for hosts
-             10.2.22 Enable use of IMMEDIATE ARBITRATION
-      10.3 Advised boot setup commands
-      10.4 PCI configuration fix-up boot option
-      10.5 Serial NVRAM support boot option
-      10.6 SCSI BUS checking boot option
-      10.7 IMMEDIATE ARBITRATION boot option
-11. Some constants and flags of the ncr53c8xx.h header file
-12. Installation
-13. Architecture dependent features
-14. Known problems
-      14.1 Tagged commands with Iomega Jaz device
-      14.2 Device names change when another controller is added
-      14.3 Using only 8 bit devices with a WIDE SCSI controller.
-      14.4 Possible data corruption during a Memory Write and Invalidate
-      14.5 IRQ sharing problems
-15. SCSI problem troubleshooting
-      15.1 Problem tracking
-      15.2 Understanding hardware error reports
-16. Synchronous transfer negotiation tables
-      16.1 Synchronous timings for 53C875 and 53C860 Ultra-SCSI controllers
-      16.2 Synchronous timings for fast SCSI-2 53C8XX controllers
-17. Serial NVRAM support (by Richard Waltham)
-      17.1 Features
-      17.2 Symbios NVRAM layout
-      17.3 Tekram  NVRAM layout
-18. Support for Big Endian
-      18.1 Big Endian CPU
-      18.2 NCR chip in Big Endian mode of operations
-
-===============================================================================
-
-1. Introduction
-
-The initial Linux ncr53c8xx driver has been a port of the ncr driver from 
-FreeBSD that has been achieved in November 1995 by:
-          Gerard Roudier              <groudier@free.fr>
-
-The original driver has been written for 386bsd and FreeBSD by:
-          Wolfgang Stanglmeier        <wolf@cologne.de>
-          Stefan Esser                <se@mi.Uni-Koeln.de>
-
-It is now available as a bundle of 2 drivers:
-
-- ncr53c8xx generic driver that supports all the SYM53C8XX family including 
-  the earliest 810 rev. 1, the latest 896 (2 channel LVD SCSI controller) and
-  the new 895A (1 channel LVD SCSI controller).
-- sym53c8xx enhanced driver (a.k.a. 896 drivers) that drops support of oldest 
-  chips in order to gain advantage of new features, as LOAD/STORE instructions 
-  available since the 810A and hardware phase mismatch available with the 
-  896 and the 895A.
-
-You can find technical information about the NCR 8xx family in the
-PCI-HOWTO written by Michael Will and in the SCSI-HOWTO written by
-Drew Eckhardt.
-
-Information about new chips is available at LSILOGIC web server:
-
-          http://www.lsilogic.com/
-
-SCSI standard documentations are available at SYMBIOS ftp server:
-
-          ftp://ftp.symbios.com/
-
-Useful SCSI tools written by Eric Youngdale are available at tsx-11:
-
-          ftp://tsx-11.mit.edu/pub/linux/ALPHA/scsi/scsiinfo-X.Y.tar.gz
-          ftp://tsx-11.mit.edu/pub/linux/ALPHA/scsi/scsidev-X.Y.tar.gz
-
-These tools are not ALPHA but quite clean and work quite well.
-It is essential you have the 'scsiinfo' package.
-
-This short documentation describes the features of the generic and enhanced
-drivers, configuration parameters and control commands available through 
-the proc SCSI file system read / write operations.
-
-This driver has been tested OK with linux/i386, Linux/Alpha and Linux/PPC.
-
-Latest driver version and patches are available at:
-
-          ftp://ftp.tux.org/pub/people/gerard-roudier
-or
-          ftp://ftp.symbios.com/mirror/ftp.tux.org/pub/tux/roudier/drivers
-
-I am not a native speaker of English and there are probably lots of
-mistakes in this README file. Any help will be welcome.
-
-
-2. Supported chips and SCSI features
-
-The following features are supported for all chips:
-
-	Synchronous negotiation
-	Disconnection
-	Tagged command queuing
-	SCSI parity checking
-	Master parity checking
-
-"Wide negotiation" is supported for chips that allow it.  The
-following table shows some characteristics of NCR 8xx family chips 
-and what drivers support them.
-
-                                                  Supported by   Supported by
-       On board                                   the generic    the enhanced 
-Chip   SDMS BIOS   Wide   SCSI std.   Max. sync   driver         driver
-----   ---------   ----   ---------   ----------  ------------   -------------
-810        N         N      FAST10    10 MB/s        Y             N
-810A       N         N      FAST10    10 MB/s        Y             Y
-815        Y         N      FAST10    10 MB/s        Y             N
-825        Y         Y      FAST10    20 MB/s        Y             N
-825A       Y         Y      FAST10    20 MB/s        Y             Y
-860        N         N      FAST20    20 MB/s        Y             Y
-875        Y         Y      FAST20    40 MB/s        Y             Y
-876        Y         Y      FAST20    40 MB/s        Y             Y
-895        Y         Y      FAST40    80 MB/s        Y             Y
-895A       Y         Y      FAST40    80 MB/s        Y             Y
-896        Y         Y      FAST40    80 MB/s        Y             Y
-897        Y         Y      FAST40    80 MB/s        Y             Y
-1510D      Y         Y      FAST40    80 MB/s        Y             Y
-1010       Y         Y      FAST80   160 MB/s        N             Y
-1010_66*   Y         Y      FAST80   160 MB/s        N             Y
-
-* Chip supports 33MHz and 66MHz PCI buses.
-
-
-Summary of other supported features:
-
-Module:                allow to load the driver
-Memory mapped I/O:     increases performance
-Profiling information: read operations from the proc SCSI file system
-Control commands:      write operations to the proc SCSI file system
-Debugging information: written to syslog (expert only)
-Scatter / gather
-Shared interrupt
-Boot setup commands
-Serial NVRAM:          Symbios and Tekram formats
-
-
-3. Advantages of the enhanced 896 driver
-
-3.1 Optimized SCSI SCRIPTS.
-
-The 810A, 825A, 875, 895, 896 and 895A support new SCSI SCRIPTS instructions 
-named LOAD and STORE that allow to move up to 1 DWORD from/to an IO register 
-to/from memory much faster that the MOVE MEMORY instruction that is supported 
-by the 53c7xx and 53c8xx family.
-The LOAD/STORE instructions support absolute and DSA relative addressing 
-modes.  The SCSI SCRIPTS had been entirely rewritten using LOAD/STORE instead 
-of MOVE MEMORY instructions.
-
-3.2 New features of the SYM53C896 (64 bit PCI dual LVD SCSI controller)
-
-The 896 and the 895A allows handling of the phase mismatch context from 
-SCRIPTS (avoids the phase mismatch interrupt that stops the SCSI processor 
-until the C code has saved the context of the transfer).
-Implementing this without using LOAD/STORE instructions would be painful 
-and I didn't even want to try it.
-
-The 896 chip supports 64 bit PCI transactions and addressing, while the 
-895A supports 32 bit PCI transactions and 64 bit addressing.
-The SCRIPTS processor of these chips is not true 64 bit, but uses segment 
-registers for bit 32-63. Another interesting feature is that LOAD/STORE 
-instructions that address the on-chip RAM (8k) remain internal to the chip.
-
-Due to the use of LOAD/STORE SCRIPTS instructions, this driver does not 
-support the following chips:
-- SYM53C810 revision < 0x10 (16)
-- SYM53C815 all revisions
-- SYM53C825 revision < 0x10 (16)
-
-4. Memory mapped I/O versus normal I/O
-
-Memory mapped I/O has less latency than normal I/O.  Since
-linux-1.3.x, memory mapped I/O is used rather than normal I/O.  Memory
-mapped I/O seems to work fine on most hardware configurations, but
-some poorly designed motherboards may break this feature.
-
-The configuration option CONFIG_SCSI_NCR53C8XX_IOMAPPED forces the
-driver to use normal I/O in all cases.
-
-
-5. Tagged command queueing
-
-Queuing more than 1 command at a time to a device allows it to perform 
-optimizations based on actual head positions and its mechanical 
-characteristics. This feature may also reduce average command latency.
-In order to really gain advantage of this feature, devices must have 
-a reasonable cache size (No miracle is to be expected for a low-end 
-hard disk with 128 KB or less).
-Some known SCSI devices do not properly support tagged command queuing.
-Generally, firmware revisions that fix this kind of problems are available 
-at respective vendor web/ftp sites.
-All I can say is that the hard disks I use on my machines behave well with 
-this driver with tagged command queuing enabled:
-
-- IBM S12 0662
-- Conner 1080S
-- Quantum Atlas I
-- Quantum Atlas II
-
-If your controller has NVRAM, you can configure this feature per target 
-from the user setup tool. The Tekram Setup program allows to tune the 
-maximum number of queued commands up to 32. The Symbios Setup only allows 
-to enable or disable this feature.
-
-The maximum number of simultaneous tagged commands queued to a device
-is currently set to 8 by default.  This value is suitable for most SCSI
-disks.  With large SCSI disks (>= 2GB, cache >= 512KB, average seek time
-<= 10 ms), using a larger value may give better performances.
-
-The sym53c8xx driver supports up to 255 commands per device, and the 
-generic ncr53c8xx driver supports up to 64, but using more than 32 is 
-generally not worth-while, unless you are using a very large disk or disk 
-array. It is noticeable that most of recent hard disks seem not to accept 
-more than 64 simultaneous commands. So, using more than 64 queued commands 
-is probably just resource wasting.
-
-If your controller does not have NVRAM or if it is managed by the SDMS 
-BIOS/SETUP, you can configure tagged queueing feature and device queue 
-depths from the boot command-line. For example:
-
-  ncr53c8xx=tags:4/t2t3q15-t4q7/t1u0q32
-
-will set tagged commands queue depths as follow:
-
-- target 2  all luns  on controller 0 --> 15
-- target 3  all luns  on controller 0 --> 15
-- target 4  all luns  on controller 0 -->  7
-- target 1  lun 0     on controller 1 --> 32
-- all other target/lun                -->  4
-
-In some special conditions, some SCSI disk firmwares may return a
-QUEUE FULL status for a SCSI command. This behaviour is managed by the
-driver using the following heuristic:
-
-- Each time a QUEUE FULL status is returned, tagged queue depth is reduced 
-  to the actual number of disconnected commands. 
-
-- Every 1000 successfully completed SCSI commands, if allowed by the
-  current limit, the maximum number of queueable commands is incremented.
-
-Since QUEUE FULL status reception and handling is resource wasting, the 
-driver notifies by default this problem to user by indicating the actual 
-number of commands used and their status, as well as its decision on the 
-device queue depth change.
-The heuristic used by the driver in handling QUEUE FULL ensures that the 
-impact on performances is not too bad. You can get rid of the messages by 
-setting verbose level to zero, as follow:
-
-1st method: boot your system using 'ncr53c8xx=verb:0' option.
-2nd method: apply "setverbose 0" control command to the proc fs entry 
-            corresponding to your controller after boot-up.
-
-6. Parity checking
-
-The driver supports SCSI parity checking and PCI bus master parity
-checking.  These features must be enabled in order to ensure safe data
-transfers.  However, some flawed devices or mother boards will have
-problems with parity. You can disable either PCI parity or SCSI parity 
-checking by entering appropriate options from the boot command line.
-(See 10: Boot setup commands).
-
-7. Profiling information
-
-Profiling information is available through the proc SCSI file system.
-Since gathering profiling information may impact performances, this 
-feature is disabled by default and requires a compilation configuration 
-option to be set to Y.
-
-The device associated with a host has the following pathname:
-
-          /proc/scsi/ncr53c8xx/N     (N=0,1,2 ....)
-
-Generally, only 1 board is used on hardware configuration, and that device is:
-          /proc/scsi/ncr53c8xx/0
-
-However, if the driver has been made as module, the number of the
-hosts is incremented each time the driver is loaded.
-
-In order to display profiling information, just enter:
-
-         cat /proc/scsi/ncr53c8xx/0
-
-and you will get something like the following text:
-
--------------------------------------------------------
-General information:
-  Chip NCR53C810, device id 0x1, revision id 0x2
-  IO port address 0x6000, IRQ number 10
-  Using memory mapped IO at virtual address 0x282c000
-  Synchronous transfer period 25, max commands per lun 4
-Profiling information:
-  num_trans    = 18014
-  num_kbytes   = 671314
-  num_disc     = 25763
-  num_break    = 1673
-  num_int      = 1685
-  num_fly      = 18038
-  ms_setup     = 4940
-  ms_data      = 369940
-  ms_disc      = 183090
-  ms_post      = 1320
--------------------------------------------------------
-
-General information is easy to understand. The device ID and the
-revision ID identify the SCSI chip as follows:
-
-Chip    Device id     Revision Id
-----    ---------     -----------
-810       0x1            <  0x10
-810A      0x1            >= 0x10
-815       0x4
-825       0x3            <  0x10
-860       0x6
-825A      0x3            >= 0x10
-875       0xf
-895       0xc
-
-The profiling information is updated upon completion of SCSI commands.
-A data structure is allocated and zeroed when the host adapter is
-attached. So, if the driver is a module, the profile counters are
-cleared each time the driver is loaded.  The "clearprof" command
-allows you to clear these counters at any time.
-
-The following counters are available:
-
-("num" prefix means "number of",
-"ms" means milli-seconds)
-
-num_trans
-	Number of completed commands
-	Example above: 18014 completed commands
-
-num_kbytes
-	Number of kbytes transferred
-	Example above: 671 MB transferred
-
-num_disc
-	Number of SCSI disconnections
-	Example above: 25763 SCSI disconnections
-
-num_break
-	number of script interruptions (phase mismatch)
-	Example above: 1673 script interruptions
-
-num_int
-	Number of interrupts other than "on the fly"
-	Example above: 1685 interruptions not "on the fly"
-
-num_fly
-	Number of interrupts "on the fly"
-	Example above: 18038 interruptions "on the fly"
-
-ms_setup
-	Elapsed time for SCSI commands setups
-	Example above: 4.94 seconds
-
-ms_data
-	Elapsed time for data transfers
-	Example above: 369.94 seconds spent for data transfer
-
-ms_disc
-	Elapsed time for SCSI disconnections
-	Example above: 183.09 seconds spent disconnected
-
-ms_post
-	Elapsed time for command post processing
-	(time from SCSI status get to command completion call)
-	Example above: 1.32 seconds spent for post processing
-
-Due to the 1/100 second tick of the system clock, "ms_post" time may
-be wrong.
-
-In the example above, we got 18038 interrupts "on the fly" and only
-1673 script breaks generally due to disconnections inside a segment 
-of the scatter list.
-
-
-8. Control commands
-
-Control commands can be sent to the driver with write operations to
-the proc SCSI file system. The generic command syntax is the
-following:
-
-      echo "<verb> <parameters>" >/proc/scsi/ncr53c8xx/0
-      (assumes controller number is 0)
-
-Using "all" for "<target>" parameter with the commands below will
-apply to all targets of the SCSI chain (except the controller).
-
-Available commands:
-
-8.1 Set minimum synchronous period factor
-
-    setsync <target> <period factor>
-
-    target:    target number
-    period:    minimum synchronous period.
-               Maximum speed = 1000/(4*period factor) except for special
-               cases below.
-
-    Specify a period of 255, to force asynchronous transfer mode.
-
-      10 means 25 nano-seconds synchronous period
-      11 means 30 nano-seconds synchronous period
-      12 means 50 nano-seconds synchronous period
-
-8.2 Set wide size
-
-    setwide <target> <size>
-
-    target:    target number
-    size:      0=8 bits, 1=16bits
-
-8.3 Set maximum number of concurrent tagged commands
- 
-    settags <target> <tags>
-
-    target:    target number
-    tags:      number of concurrent tagged commands
-               must not be greater than SCSI_NCR_MAX_TAGS (default: 8)
-
-8.4 Set order type for tagged command
-
-    setorder <order>
-
-    order:     3 possible values:
-               simple: use SIMPLE TAG for all operations (read and write)
-               ordered: use ORDERED TAG for all operations
-               default: use default tag type,
-                        SIMPLE  TAG for read  operations
-                        ORDERED TAG for write operations
-
-
-8.5 Set debug mode
-
-    setdebug <list of debug flags>
-
-    Available debug flags:
-        alloc:   print info about memory allocations (ccb, lcb)
-        queue:   print info about insertions into the command start queue
-        result:  print sense data on CHECK CONDITION status
-        scatter: print info about the scatter process
-        scripts: print info about the script binding process
-	tiny:    print minimal debugging information
-	timing:  print timing information of the NCR chip
-	nego:    print information about SCSI negotiations
-	phase:   print information on script interruptions
-
-    Use "setdebug" with no argument to reset debug flags.
-
-
-8.6 Clear profile counters
-
-    clearprof
-
-    The profile counters are automatically cleared when the amount of
-    data transferred reaches 1000 GB in order to avoid overflow.
-    The "clearprof" command allows you to clear these counters at any time.
-
-
-8.7 Set flag (no_disc)
- 
-    setflag <target> <flag>
-
-    target:    target number
-
-    For the moment, only one flag is available:
-
-        no_disc:   not allow target to disconnect.
-
-    Do not specify any flag in order to reset the flag. For example:
-    - setflag 4
-      will reset no_disc flag for target 4, so will allow it disconnections.
-    - setflag all
-      will allow disconnection for all devices on the SCSI bus.
-
-
-8.8 Set verbose level
-
-    setverbose #level
-
-    The driver default verbose level is 1. This command allows to change 
-    th driver verbose level after boot-up.
-
-8.9 Reset all logical units of a target
-
-    resetdev <target>
-
-    target:    target number
-    The driver will try to send a BUS DEVICE RESET message to the target.
-    (Only supported by the SYM53C8XX driver and provided for test purpose)
-
-8.10 Abort all tasks of all logical units of a target
-
-    cleardev <target>
-
-    target:    target number
-    The driver will try to send a ABORT message to all the logical units 
-    of the target.
-    (Only supported by the SYM53C8XX driver and provided for test purpose)
-
-
-9. Configuration parameters
-
-If the firmware of all your devices is perfect enough, all the
-features supported by the driver can be enabled at start-up.  However,
-if only one has a flaw for some SCSI feature, you can disable the
-support by the driver of this feature at linux start-up and enable
-this feature after boot-up only for devices that support it safely.
-
-CONFIG_SCSI_NCR53C8XX_IOMAPPED       (default answer: n)
-    Answer "y" if you suspect your mother board to not allow memory mapped I/O.
-    May slow down performance a little.  This option is required by
-    Linux/PPC and is used no matter what you select here.  Linux/PPC
-    suffers no performance loss with this option since all IO is memory
-    mapped anyway.
-
-CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS    (default answer: 8)
-    Default tagged command queue depth.
-
-CONFIG_SCSI_NCR53C8XX_MAX_TAGS         (default answer: 8)
-    This option allows you to specify the maximum number of tagged commands 
-    that can be queued to a device. The maximum supported value is 32.
-
-CONFIG_SCSI_NCR53C8XX_SYNC            (default answer: 5)
-    This option allows you to specify the frequency in MHz the driver 
-    will use at boot time for synchronous data transfer negotiations.
-    This frequency can be changed later with the "setsync" control command.
-    0 means "asynchronous data transfers".
-
-CONFIG_SCSI_NCR53C8XX_FORCE_SYNC_NEGO (default answer: n)
-    Force synchronous negotiation for all SCSI-2 devices.
-    Some SCSI-2 devices do not report this feature in byte 7 of inquiry 
-    response but do support it properly (TAMARACK scanners for example).
-
-CONFIG_SCSI_NCR53C8XX_NO_DISCONNECT   (default and only reasonable answer: n)
-    If you suspect a device of yours does not properly support disconnections,
-    you can answer "y". Then, all SCSI devices will never disconnect the bus 
-    even while performing long SCSI operations.
-
-CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT
-    Genuine SYMBIOS boards use GPIO0 in output for controller LED and GPIO3 
-    bit as a flag indicating singled-ended/differential interface.
-    If all the boards of your system are genuine SYMBIOS boards or use
-    BIOS and drivers from SYMBIOS, you would want to enable this option.
-    This option must NOT be enabled if your system has at least one 53C8XX 
-    based scsi board with a vendor-specific BIOS.
-    For example, Tekram DC-390/U, DC-390/W and DC-390/F scsi controllers 
-    use a vendor-specific BIOS and are known to not use SYMBIOS compatible 
-    GPIO wiring. So, this option must not be enabled if your system has 
-    such a board installed.
-
-CONFIG_SCSI_NCR53C8XX_NVRAM_DETECT
-    Enable support for reading the serial NVRAM data on Symbios and
-    some Symbios compatible cards, and Tekram DC390W/U/F cards. Useful for
-    systems with more than one Symbios compatible controller where at least
-    one has a serial NVRAM, or for a system with a mixture of Symbios and
-    Tekram cards. Enables setting the boot order of host adaptors
-    to something other than the default order or "reverse probe" order. 
-    Also enables Symbios and Tekram cards to be distinguished so
-    CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT may be set in a system with a
-    mixture of Symbios and Tekram cards so the Symbios cards can make use of
-    the full range of Symbios features, differential, led pin, without
-    causing problems for the Tekram card(s).
-
-10. Boot setup commands
-
-10.1 Syntax
-
-Setup commands can be passed to the driver either at boot time or as a 
-string variable using 'insmod'.
-
-A boot setup command for the ncr53c8xx (sym53c8xx) driver begins with the 
-driver name "ncr53c8xx="(sym53c8xx). The kernel syntax parser then expects 
-an optional list of integers separated with comma followed by an optional 
-list of comma-separated strings. Example of boot setup command under lilo 
-prompt:
-
-lilo: linux root=/dev/hda2 ncr53c8xx=tags:4,sync:10,debug:0x200
-
-- enable tagged commands, up to 4 tagged commands queued.
-- set synchronous negotiation speed to 10 Mega-transfers / second.
-- set DEBUG_NEGO flag.
-
-Since comma seems not to be allowed when defining a string variable using  
-'insmod', the driver also accepts <space> as option separator. 
-The following command will install driver module with the same options as 
-above.
-
-    insmod ncr53c8xx.o ncr53c8xx="tags:4 sync:10 debug:0x200"
-
-For the moment, the integer list of arguments is discarded by the driver. 
-It will be used in the future in order to allow a per controller setup.
-
-Each string argument must be specified as "keyword:value". Only lower-case 
-characters and digits are allowed.
-
-In a system that contains multiple 53C8xx adapters insmod will install the 
-specified driver on each adapter. To exclude a chip use the 'excl' keyword.
-
-The sequence of commands, 
-
-    insmod sym53c8xx sym53c8xx=excl:0x1400
-    insmod ncr53c8xx
-
-installs the sym53c8xx driver on all adapters except the one at IO port 
-address 0x1400 and then installs the ncr53c8xx driver to the adapter at IO 
-port address 0x1400.
-
-
-10.2 Available arguments
-
-10.2.1  Master parity checking
-        mpar:y     enabled
-        mpar:n     disabled
-
-10.2.2  Scsi parity checking
-        spar:y     enabled
-        spar:n     disabled
-
-10.2.3  Scsi disconnections
-        disc:y     enabled
-        disc:n     disabled
- 
-10.2.4  Special features
-   Only apply to 810A, 825A, 860, 875 and 895 controllers.
-   Have no effect with other ones.
-        specf:y    (or 1) enabled
-        specf:n    (or 0) disabled
-        specf:3           enabled except Memory Write And Invalidate
-   The default driver setup is 'specf:3'. As a consequence, option 'specf:y' 
-   must be specified in the boot setup command to enable Memory Write And 
-   Invalidate.
-
-10.2.5  Ultra SCSI support
-   Only apply to 860, 875, 895, 895a, 896, 1010 and 1010_66 controllers.
-   Have no effect with other ones.
-        ultra:n    All ultra speeds enabled
-        ultra:2    Ultra2 enabled
-        ultra:1    Ultra enabled
-        ultra:0    Ultra speeds disabled
-
-10.2.6  Default number of tagged commands
-        tags:0     (or tags:1 ) tagged command queuing disabled
-        tags:#tags (#tags  > 1) tagged command queuing enabled
-  #tags will be truncated to the max queued commands configuration parameter.
-  This option also allows to specify a command queue depth for each device 
-  that support tagged command queueing.
-  Example:
-      ncr53c8xx=tags:10/t2t3q16-t5q24/t1u2q32
-               will set devices queue depth as follow:
-      - controller #0 target #2 and target #3                  -> 16 commands,
-      - controller #0 target #5                                -> 24 commands,
-      - controller #1 target #1 logical unit #2                -> 32 commands,
-      - all other logical units (all targets, all controllers) -> 10 commands.
-
-10.2.7  Default synchronous period factor
-        sync:255     disabled (asynchronous transfer mode)
-        sync:#factor
-  #factor = 10     Ultra-2 SCSI 40 Mega-transfers / second
-  #factor = 11     Ultra-2 SCSI 33 Mega-transfers / second
-  #factor < 25     Ultra   SCSI 20 Mega-transfers / second
-  #factor < 50     Fast    SCSI-2
-
-  In all cases, the driver will use the minimum transfer period supported by 
-  controllers according to NCR53C8XX chip type.
-
-10.2.8  Negotiate synchronous with all devices
-        (force sync nego)
-        fsn:y      enabled
-        fsn:n      disabled
-
-10.2.9  Verbosity level
-        verb:0     minimal
-        verb:1     normal
-        verb:2     too much
-
-10.2.10 Debug mode
-        debug:0	 clear debug flags
-        debug:#x   set debug flags
-  #x is an integer value combining the following power-of-2 values:
-  DEBUG_ALLOC       0x1
-  DEBUG_PHASE       0x2
-  DEBUG_POLL        0x4
-  DEBUG_QUEUE       0x8
-  DEBUG_RESULT     0x10
-  DEBUG_SCATTER    0x20
-  DEBUG_SCRIPT     0x40
-  DEBUG_TINY       0x80
-  DEBUG_TIMING    0x100
-  DEBUG_NEGO      0x200
-  DEBUG_TAGS      0x400
-  DEBUG_FREEZE    0x800
-  DEBUG_RESTART  0x1000
-
-  You can play safely with DEBUG_NEGO. However, some of these flags may 
-  generate bunches of syslog messages. 
-
-10.2.11 Burst max
-        burst:0    burst disabled
-        burst:255  get burst length from initial IO register settings.
-        burst:#x   burst enabled (1<<#x burst transfers max)
-  #x is an integer value which is log base 2 of the burst transfers max.
-  The NCR53C875 and NCR53C825A support up to 128 burst transfers (#x = 7).
-  Other chips only support up to 16 (#x = 4).
-  This is a maximum value. The driver set the burst length according to chip 
-  and revision ids. By default the driver uses the maximum value supported 
-  by the chip.
-
-10.2.12 LED support
-        led:1      enable  LED support
-        led:0      disable LED support
-  Donnot enable LED support if your scsi board does not use SDMS BIOS.
-  (See 'Configuration parameters')
-
-10.2.13 Max wide
-        wide:1      wide scsi enabled
-        wide:0      wide scsi disabled
-  Some scsi boards use a 875 (ultra wide) and only supply narrow connectors.
-  If you have connected a wide device with a 50 pins to 68 pins cable 
-  converter, any accepted wide negotiation will break further data transfers.
-  In such a case, using "wide:0" in the bootup command will be helpful. 
-
-10.2.14 Differential mode
-        diff:0	never set up diff mode
-        diff:1	set up diff mode if BIOS set it
-        diff:2	always set up diff mode
-        diff:3	set diff mode if GPIO3 is not set
-
-10.2.15 IRQ mode
-        irqm:0     always open drain
-        irqm:1     same as initial settings (assumed BIOS settings)
-        irqm:2     always totem pole
-        irqm:0x10  driver will not use IRQF_SHARED flag when requesting irq
-
-    (Bits 0x10 and 0x20 can be combined with hardware irq mode option)
-
-10.2.16 Reverse probe
-        revprob:n   probe chip ids from the PCI configuration in this order:
-                    810, 815, 820, 860, 875, 885, 895, 896
-        revprob:y   probe chip ids in the reverse order.
-
-10.2.17 Fix up PCI configuration space
-        pcifix:<option bits>
-
-    Available option bits:
-        0x0:   No attempt to fix PCI configuration space registers values.
-        0x1:   Set PCI cache-line size register if not set.
-        0x2:   Set write and invalidate bit in PCI command register.
-        0x4:   Increase if necessary PCI latency timer according to burst max.
-
-    Use 'pcifix:7' in order to allow the driver to fix up all PCI features.
-
-10.2.18 Serial NVRAM
-        nvram:n     do not look for serial NVRAM
-        nvram:y     test controllers for onboard serial NVRAM
-        (alternate binary form)
-        mvram=<bits options>
-        0x01   look for NVRAM  (equivalent to nvram=y)
-        0x02   ignore NVRAM "Synchronous negotiation" parameters for all devices
-        0x04   ignore NVRAM "Wide negotiation"  parameter for all devices
-        0x08   ignore NVRAM "Scan at boot time" parameter for all devices
-        0x80   also attach controllers set to OFF in the NVRAM (sym53c8xx only)
-
-10.2.19 Check SCSI BUS 
-        buschk:<option bits>
-
-    Available option bits:
-        0x0:   No check.
-        0x1:   Check and do not attach the controller on error.  
-        0x2:   Check and just warn on error.
-        0x4:   Disable SCSI bus integrity checking.
-
-10.2.20 Exclude a host from being attached
-        excl=<io_address>
-
-    Prevent host at a given io address from being attached.
-    For example 'ncr53c8xx=excl:0xb400,excl:0xc000' indicate to the 
-    ncr53c8xx driver not to attach hosts at address 0xb400 and 0xc000.
-
-10.2.21 Suggest a default SCSI id for hosts
-        hostid:255	no id suggested.
-        hostid:#x   (0 < x < 7) x suggested for hosts SCSI id.
-
-    If a host SCSI id is available from the NVRAM, the driver will ignore 
-    any value suggested as boot option. Otherwise, if a suggested value 
-    different from 255 has been supplied, it will use it. Otherwise, it will 
-    try to deduce the value previously set in the hardware and use value 
-    7 if the hardware value is zero.
-
-10.2.22 Enable use of IMMEDIATE ARBITRATION
-        (only supported by the sym53c8xx driver. See 10.7 for more details)
-        iarb:0    do not use this feature.
-        iarb:#x   use this feature according to bit fields as follow:
-
-    bit 0 (1) : enable IARB each time the initiator has been reselected 
-                when it arbitrated for the SCSI BUS.
-    (#x >> 4) : maximum number of successive settings of IARB if the initiator 
-                win arbitration and it has other commands to send to a device.
-
-Boot fail safe
-    safe:y	load the following assumed fail safe initial setup
-
-  master parity			disabled		mpar:n
-  scsi parity			enabled			spar:y
-  disconnections		not allowed		disc:n
-  special features		disabled		specf:n
-  ultra scsi			disabled		ultra:n
-  force sync negotiation	disabled		fsn:n
-  reverse probe			disabled		revprob:n
-  PCI fix up                    disabled                pcifix:0
-  serial NVRAM                  enabled                 nvram:y
-  verbosity level		2			verb:2
-  tagged command queuing	disabled		tags:0
-  synchronous negotiation	disabled		sync:255
-  debug flags			none			debug:0
-  burst length			from BIOS settings	burst:255
-  LED support			disabled		led:0
-  wide support			disabled		wide:0
-  settle time			10 seconds		settle:10
-  differential support		from BIOS settings	diff:1
-  irq mode			from BIOS settings	irqm:1
-  SCSI BUS check		do not attach on error	buschk:1
-  immediate arbitration		disabled		iarb:0
-
-10.3 Advised boot setup commands
-
-If the driver has been configured with default options, the equivalent 
-boot setup is:
-
-   ncr53c8xx=mpar:y,spar:y,disc:y,specf:3,fsn:n,ultra:2,fsn:n,revprob:n,verb:1\
-             tags:0,sync:50,debug:0,burst:7,led:0,wide:1,settle:2,diff:0,irqm:0
-
-For an installation diskette or a safe but not fast system,
-boot setup can be:
-
-    ncr53c8xx=safe:y,mpar:y,disc:y
-    ncr53c8xx=safe:y,disc:y
-    ncr53c8xx=safe:y,mpar:y
-    ncr53c8xx=safe:y
-
-My personal system works flawlessly with the following equivalent setup:
-
-   ncr53c8xx=mpar:y,spar:y,disc:y,specf:1,fsn:n,ultra:2,fsn:n,revprob:n,verb:1\
-             tags:32,sync:12,debug:0,burst:7,led:1,wide:1,settle:2,diff:0,irqm:0
-
-The driver prints its actual setup when verbosity level is 2. You can try 
-"ncr53c8xx=verb:2" to get the "static" setup of the driver, or add "verb:2" 
-to your boot setup command in order to check the actual setup the driver is 
-using.
-
-10.4 PCI configuration fix-up boot option
-
-pcifix:<option bits>
-
-Available option bits:
-    0x1:     Set PCI cache-line size register if not set.
-    0x2:     Set write and invalidate bit in PCI command register.
-
-Use 'pcifix:3' in order to allow the driver to fix both PCI features.
-
-These options only apply to new SYMBIOS chips 810A, 825A, 860, 875 
-and 895 and are only supported for Pentium and 486 class processors.
-Recent SYMBIOS 53C8XX scsi processors are able to use PCI read multiple 
-and PCI write and invalidate commands. These features require the 
-cache line size register to be properly set in the PCI configuration 
-space of the chips. On the other hand, chips will use PCI write and 
-invalidate commands only if the corresponding bit is set to 1 in the 
-PCI command register.
-
-Not all PCI bioses set the PCI cache line register and the PCI write and 
-invalidate bit in the PCI configuration space of 53C8XX chips.
-Optimized PCI accesses may be broken for some PCI/memory controllers or 
-make problems with some PCI boards.
-
-This fix-up worked flawlessly on my previous system.
-(MB Triton HX / 53C875 / 53C810A)
-I use these options at my own risks as you will do if you decide to 
-use them too.
-
-
-10.5 Serial NVRAM support boot option
-
-nvram:n     do not look for serial NVRAM
-nvram:y     test controllers for onboard serial NVRAM
-
-This option can also been entered as an hexadecimal value that allows 
-to control what information the driver will get from the NVRAM and what 
-information it will ignore.
-For details see '17. Serial NVRAM support'.
-
-When this option is enabled, the driver tries to detect all boards using 
-a Serial NVRAM. This memory is used to hold user set up parameters.
-
-The parameters the driver is able to get from the NVRAM depend on the 
-data format used, as follow:
-
-                                 Tekram format      Symbios format
-General and host parameters
-    Boot order                         N                   Y
-    Host SCSI ID                       Y                   Y
-    SCSI parity checking               Y                   Y
-    Verbose boot messages              N                   Y
-SCSI devices parameters
-    Synchronous transfer speed         Y                   Y
-    Wide 16 / Narrow                   Y                   Y
-    Tagged Command Queuing enabled     Y                   Y
-    Disconnections enabled             Y                   Y
-    Scan at boot time                  N                   Y
-
-In order to speed up the system boot, for each device configured without 
-the "scan at boot time" option, the driver forces an error on the 
-first TEST UNIT READY command received for this device.
-
-Some SDMS BIOS revisions seem to be unable to boot cleanly with very fast 
-hard disks. In such a situation you cannot configure the NVRAM with 
-optimized parameters value.
-
-The 'nvram' boot option can be entered in hexadecimal form in order 
-to ignore some options configured in the NVRAM, as follow:
-
-mvram=<bits options>
-      0x01   look for NVRAM  (equivalent to nvram=y)
-      0x02   ignore NVRAM "Synchronous negotiation" parameters for all devices
-      0x04   ignore NVRAM "Wide negotiation"  parameter for all devices
-      0x08   ignore NVRAM "Scan at boot time" parameter for all devices
-      0x80   also attach controllers set to OFF in the NVRAM (sym53c8xx only)
-
-Option 0x80 is only supported by the sym53c8xx driver and is disabled by 
-default. Result is that, by default (option not set), the sym53c8xx driver 
-will not attach controllers set to OFF in the NVRAM.
-
-The ncr53c8xx always tries to attach all the controllers. Option 0x80 has 
-not been added to the ncr53c8xx driver, since it has been reported to 
-confuse users who use this driver since a long time. If you desire a 
-controller not to be attached by the ncr53c8xx driver at Linux boot, you 
-must use the 'excl' driver boot option.
-
-10.6 SCSI BUS checking boot option.
-
-When this option is set to a non-zero value, the driver checks SCSI lines 
-logic state, 100 micro-seconds after having asserted the SCSI RESET line.
-The driver just reads SCSI lines and checks all lines read FALSE except RESET.
-Since SCSI devices shall release the BUS at most 800 nano-seconds after SCSI 
-RESET has been asserted, any signal to TRUE may indicate a SCSI BUS problem.
-Unfortunately, the following common SCSI BUS problems are not detected:
-- Only 1 terminator installed.
-- Misplaced terminators.
-- Bad quality terminators.
-On the other hand, either bad cabling, broken devices, not conformant 
-devices, ... may cause a SCSI signal to be wrong when te driver reads it.
-
-10.7 IMMEDIATE ARBITRATION boot option
-
-This option is only supported by the SYM53C8XX driver (not by the NCR53C8XX).
-
-SYMBIOS 53C8XX chips are able to arbitrate for the SCSI BUS as soon as they 
-have detected an expected disconnection (BUS FREE PHASE). For this process 
-to be started, bit 1 of SCNTL1 IO register must be set when the chip is 
-connected to the SCSI BUS.
-
-When this feature has been enabled for the current connection, the chip has 
-every chance to win arbitration if only devices with lower priority are 
-competing for the SCSI BUS. By the way, when the chip is using SCSI id 7, 
-then it will for sure win the next SCSI BUS arbitration.
-
-Since, there is no way to know what devices are trying to arbitrate for the 
-BUS, using this feature can be extremely unfair. So, you are not advised
-to enable it, or at most enable this feature for the case the chip lost 
-the previous arbitration (boot option 'iarb:1').
-
-This feature has the following advantages:
-
-a) Allow the initiator with ID 7 to win arbitration when it wants so.
-b) Overlap at least 4 micro-seconds of arbitration time with the execution 
-   of SCRIPTS that deal with the end of the current connection and that 
-   starts the next job.
-
-Hmmm... But (a) may just prevent other devices from reselecting the initiator, 
-and delay data transfers or status/completions, and (b) may just waste 
-SCSI BUS bandwidth if the SCRIPTS execution lasts more than 4 micro-seconds.
-
-The use of IARB needs the SCSI_NCR_IARB_SUPPORT option to have been defined 
-at compile time and the 'iarb' boot option to have been set to a non zero 
-value at boot time. It is not that useful for real work, but can be used 
-to stress SCSI devices or for some applications that can gain advantage of 
-it. By the way, if you experience badnesses like 'unexpected disconnections', 
-'bad reselections', etc... when using IARB on heavy IO load, you should not 
-be surprised, because force-feeding anything and blocking its arse at the 
-same time cannot work for a long time. :-))
-
-
-11. Some constants and flags of the ncr53c8xx.h header file
-
-Some of these are defined from the configuration parameters.  To
-change other "defines", you must edit the header file.  Do that only
-if you know what you are doing.
-
-SCSI_NCR_SETUP_SPECIAL_FEATURES	(default: defined)
-	If defined, the driver will enable some special features according  
-	to chip and revision id.
-        For 810A, 860, 825A, 875 and 895 scsi chips, this option enables 
-	support of features that reduce load of PCI bus and memory accesses 
-	during  scsi transfer processing: burst op-code fetch, read multiple, 
-        read line, prefetch, cache line, write and invalidate, 
-        burst 128 (875 only), large dma fifo (875 only), offset 16 (875 only).
-	Can be changed by the following boot setup command:
-		ncr53c8xx=specf:n
-
-SCSI_NCR_IOMAPPED		(default: not defined)
-	If defined, normal I/O is forced.
-
-SCSI_NCR_SHARE_IRQ		(default: defined)
-	If defined, request shared IRQ.
-	
-SCSI_NCR_MAX_TAGS		(default: 8)
-	Maximum number of simultaneous tagged commands to a device.
-	Can be changed by "settags <target> <maxtags>"
-
-SCSI_NCR_SETUP_DEFAULT_SYNC     (default: 50)
-	Transfer period factor the driver will use at boot time for synchronous 
-	negotiation. 0 means asynchronous.
-	Can be changed by "setsync <target> <period factor>"
-
-SCSI_NCR_SETUP_DEFAULT_TAGS     (default: 8)
-	Default number of simultaneous tagged commands to a device.
-	< 1 means tagged command queuing disabled at start-up.
-
-SCSI_NCR_ALWAYS_SIMPLE_TAG	(default: defined)
-	Use SIMPLE TAG for read and write commands.
-	Can be changed by "setorder <ordered|simple|default>"
-
-SCSI_NCR_SETUP_DISCONNECTION	(default: defined)
-	If defined, targets are allowed to disconnect.
-
-SCSI_NCR_SETUP_FORCE_SYNC_NEGO	(default: not defined)
-	If defined, synchronous negotiation is tried for all SCSI-2 devices.
-	Can be changed by "setsync <target> <period>"
-
-SCSI_NCR_SETUP_MASTER_PARITY	(default: defined)
-	If defined, master parity checking is enabled.
-
-SCSI_NCR_SETUP_SCSI_PARITY	(default: defined)
-	If defined, SCSI parity checking is enabled.
-
-SCSI_NCR_PROFILE_SUPPORT	(default: not defined)
-	If defined, profiling information is gathered.
-
-SCSI_NCR_MAX_SCATTER		(default: 128)
-	Scatter list size of the driver ccb.
-
-SCSI_NCR_MAX_TARGET		(default: 16)
-	Max number of targets per host.
-
-SCSI_NCR_MAX_HOST		(default: 2)
-	Max number of host controllers.
-
-SCSI_NCR_SETTLE_TIME		(default: 2)
-	Number of seconds the driver will wait after reset.
-
-SCSI_NCR_TIMEOUT_ALERT		(default: 3)
-	If a pending command will time out after this amount of seconds,
-	an ordered tag is used for the next command.
-	Avoids timeouts for unordered tagged commands.
-
-SCSI_NCR_CAN_QUEUE		(default: 7*SCSI_NCR_MAX_TAGS)
-	Max number of commands that can be queued to a host.
-
-SCSI_NCR_CMD_PER_LUN		(default: SCSI_NCR_MAX_TAGS)
-	Max number of commands queued to a host for a device.
-
-SCSI_NCR_SG_TABLESIZE		(default: SCSI_NCR_MAX_SCATTER-1)
-	Max size of the Linux scatter/gather list.
-
-SCSI_NCR_MAX_LUN	(default: 8)
-	Max number of LUNs per target.
-
-
-12. Installation
-
-This driver is part of the linux kernel distribution.
-Driver files are located in the sub-directory "drivers/scsi" of the 
-kernel source tree.
-
-Driver files:
-
-	README.ncr53c8xx	: this file
-	ChangeLog.ncr53c8xx	: change log
-	ncr53c8xx.h		: definitions
-	ncr53c8xx.c		: the driver code
-
-New driver versions are made available separately in order to allow testing 
-changes and new features prior to including them into the linux kernel 
-distribution. The following URL provides information on latest available 
-patches: 
-
-      ftp://ftp.tux.org/pub/people/gerard-roudier/README
-
-
-13. Architecture dependent features.
-
-<Not yet written>
-
-
-14. Known problems
-
-14.1 Tagged commands with Iomega Jaz device
-
-I have not tried this device, however it has been reported to me the
-following: This device is capable of Tagged command queuing. However
-while spinning up, it rejects Tagged commands. This behaviour is
-conforms to 6.8.2 of SCSI-2 specifications. The current behaviour of
-the driver in that situation is not satisfying. So do not enable
-Tagged command queuing for devices that are able to spin down.  The
-other problem that may appear is timeouts. The only way to avoid
-timeouts seems to edit linux/drivers/scsi/sd.c and to increase the
-current timeout values.
-
-14.2 Device names change when another controller is added.
-
-When you add a new NCR53C8XX chip based controller to a system that already 
-has one or more controllers of this family, it may happen that the order 
-the driver registers them to the kernel causes problems due to device 
-name changes.
-When at least one controller uses NvRAM, SDMS BIOS version 4 allows you to 
-define the order the BIOS will scan the scsi boards. The driver attaches 
-controllers according to BIOS information if NvRAM detect option is set.
-
-If your controllers do not have NvRAM, you can:
-
-- Ask the driver to probe chip ids in reverse order from the boot command
-  line: ncr53c8xx=revprob:y
-- Make appropriate changes in the fstab.
-- Use the 'scsidev' tool from Eric Youngdale.
-
-14.3 Using only 8 bit devices with a WIDE SCSI controller.
-
-When only 8 bit NARROW devices are connected to a 16 bit WIDE SCSI controller, 
-you must ensure that lines of the wide part of the SCSI BUS are pulled-up.
-This can be achieved by ENABLING the WIDE TERMINATOR portion of the SCSI 
-controller card.
-The TYAN 1365 documentation revision 1.2 is not correct about such settings.
-(page 10, figure 3.3).
-
-14.4 Possible data corruption during a Memory Write and Invalidate
-
-This problem is described in SYMBIOS DEL 397, Part Number 69-039241, ITEM 4.
-
-In some complex situations, 53C875 chips revision <= 3 may start a PCI 
-Write and Invalidate Command at a not cache-line-aligned 4 DWORDS boundary.
-This is only possible when Cache Line Size is 8 DWORDS or greater.
-Pentium systems use a 8 DWORDS cache line size and so are concerned by 
-this chip bug, unlike i486 systems that use a 4 DWORDS cache line size.
-
-When this situation occurs, the chip may complete the Write and Invalidate 
-command after having only filled part of the last cache line involved in 
-the transfer, leaving to data corruption the remainder of this cache line.
-
-Not using Write And Invalidate obviously gets rid of this chip bug, and so 
-it is now the default setting of the driver.
-However, for people like me who want to enable this feature, I have added 
-part of a work-around suggested by SYMBIOS. This work-around resets the 
-addressing logic when the DATA IN phase is entered and so prevents the bug 
-from being triggered for the first SCSI MOVE of the phase. This work-around 
-should be enough according to the following:
-
-The only driver internal data structure that is greater than 8 DWORDS  and 
-that is moved by the SCRIPTS processor is the 'CCB header' that contains 
-the context of the SCSI transfer. This data structure is aligned on 8 DWORDS 
-boundary (Pentium Cache Line Size), and so is immune to this chip bug, at 
-least on Pentium systems.
-But the conditions of this bug can be met when a SCSI read command is 
-performed using a buffer that is 4 DWORDS but not cache-line aligned.
-This cannot happen under Linux when scatter/gather lists are used since 
-they only refer to system buffers that are well aligned. So, a work around 
-may only be needed under Linux when a scatter/gather list is not used and 
-when the SCSI DATA IN phase is reentered after a phase mismatch.
-
-15. SCSI problem troubleshooting
-
-15.1 Problem tracking
-
-Most SCSI problems are due to a non conformant SCSI bus or to buggy
-devices.  If unfortunately you have SCSI problems, you can check the
-following things:
-
-- SCSI bus cables
-- terminations at both end of the SCSI chain
-- linux syslog messages (some of them may help you)
-
-If you do not find the source of problems, you can configure the
-driver with no features enabled.
-
-- only asynchronous data transfers
-- tagged commands disabled
-- disconnections not allowed
-
-Now, if your SCSI bus is ok, your system have every chance to work
-with this safe configuration but performances will not be optimal.
-
-If it still fails, then you can send your problem description to
-appropriate mailing lists or news-groups.  Send me a copy in order to
-be sure I will receive it.  Obviously, a bug in the driver code is
-possible.
-
-     My email address: Gerard Roudier <groudier@free.fr>
-
-Allowing disconnections is important if you use several devices on
-your SCSI bus but often causes problems with buggy devices.
-Synchronous data transfers increases throughput of fast devices like
-hard disks.  Good SCSI hard disks with a large cache gain advantage of
-tagged commands queuing.
-
-Try to enable one feature at a time with control commands.  For example:
-
-- echo "setsync all 25" >/proc/scsi/ncr53c8xx/0
-  Will enable fast synchronous data transfer negotiation for all targets.
-
-- echo "setflag 3" >/proc/scsi/ncr53c8xx/0
-  Will reset flags (no_disc) for target 3, and so will allow it to disconnect 
-  the SCSI Bus.
-
-- echo "settags 3 8" >/proc/scsi/ncr53c8xx/0
-  Will enable tagged command queuing for target 3 if that device supports it.
-
-Once you have found the device and the feature that cause problems, just 
-disable that feature for that device.
-
-15.2 Understanding hardware error reports
-
-When the driver detects an unexpected error condition, it may display a 
-message of the following pattern.
-
-sym53c876-0:1: ERROR (0:48) (1-21-65) (f/95) @ (script 7c0:19000000).
-sym53c876-0: script cmd = 19000000
-sym53c876-0: regdump: da 10 80 95 47 0f 01 07 75 01 81 21 80 01 09 00.
-
-Some fields in such a message may help you understand the cause of the 
-problem, as follows:
-
-sym53c876-0:1: ERROR (0:48) (1-21-65) (f/95) @ (script 7c0:19000000).
-............A.........B.C....D.E..F....G.H.......I.....J...K.......
-
-Field A : target number.
-  SCSI ID of the device the controller was talking with at the moment the 
-  error occurs.
-
-Field B : DSTAT io register (DMA STATUS)
-  Bit 0x40 : MDPE Master Data Parity Error
-             Data parity error detected on the PCI BUS.
-  Bit 0x20 : BF   Bus Fault
-             PCI bus fault condition detected
-  Bit 0x01 : IID  Illegal Instruction Detected
-             Set by the chip when it detects an Illegal Instruction format 
-             on some condition that makes an instruction illegal.
-  Bit 0x80 : DFE Dma Fifo Empty
-             Pure status bit that does not indicate an error.
-  If the reported DSTAT value contains a combination of MDPE (0x40), 
-  BF (0x20), then the cause may be likely due to a PCI BUS problem.
-
-Field C : SIST io register (SCSI Interrupt Status)
-  Bit 0x08 : SGE  SCSI GROSS ERROR
-             Indicates that the chip detected a severe error condition 
-             on the SCSI BUS that prevents the SCSI protocol from functioning
-             properly.
-  Bit 0x04 : UDC  Unexpected Disconnection
-             Indicates that the device released the SCSI BUS when the chip 
-             was not expecting this to happen. A device may behave so to 
-             indicate the SCSI initiator that an error condition not reportable              using the SCSI protocol has occurred.
-  Bit 0x02 : RST  SCSI BUS Reset
-             Generally SCSI targets do not reset the SCSI BUS, although any 
-             device on the BUS can reset it at any time.
-  Bit 0x01 : PAR  Parity
-             SCSI parity error detected.
-  On a faulty SCSI BUS, any error condition among SGE (0x08), UDC (0x04) and 
-  PAR (0x01) may be detected by the chip. If your SCSI system sometimes 
-  encounters such error conditions, especially SCSI GROSS ERROR, then a SCSI 
-  BUS problem is likely the cause of these errors.
-
-For fields D,E,F,G and H, you may look into the sym53c8xx_defs.h file 
-that contains some minimal comments on IO register bits.
-Field D : SOCL  Scsi Output Control Latch
-          This register reflects the state of the SCSI control lines the 
-          chip want to drive or compare against.
-Field E : SBCL  Scsi Bus Control Lines
-          Actual value of control lines on the SCSI BUS.
-Field F : SBDL  Scsi Bus Data Lines
-          Actual value of data lines on the SCSI BUS.
-Field G : SXFER  SCSI Transfer
-          Contains the setting of the Synchronous Period for output and 
-          the current Synchronous offset (offset 0 means asynchronous).
-Field H : SCNTL3 Scsi Control Register 3
-          Contains the setting of timing values for both asynchronous and 
-          synchronous data transfers. 
-
-Understanding Fields I, J, K and dumps requires to have good knowledge of 
-SCSI standards, chip cores functionnals and internal driver data structures.
-You are not required to decode and understand them, unless you want to help 
-maintain the driver code.
-
-16. Synchronous transfer negotiation tables
-
-Tables below have been created by calling the routine the driver uses
-for synchronisation negotiation timing calculation and chip setting.
-The first table corresponds to Ultra chips 53875 and 53C860 with 80 MHz 
-clock and 5 clock divisors.
-The second one has been calculated by setting the scsi clock to 40 Mhz 
-and using 4 clock divisors and so applies to all NCR53C8XX chips in fast 
-SCSI-2 mode.
-
-Periods are in nano-seconds and speeds are in Mega-transfers per second.
-1 Mega-transfers/second means 1 MB/s with 8 bits SCSI and 2 MB/s with 
-Wide16 SCSI.
-
-16.1 Synchronous timings for 53C895, 53C875 and 53C860 SCSI controllers
-
- ----------------------------------------------
- Negotiated                     NCR settings
- Factor   Period   Speed        Period   Speed
- ------   ------   ------       ------   ------
- 10       25       40.000       25       40.000   (53C895 only)
- 11       30.2     33.112       31.25    32.000   (53C895 only)
- 12       50       20.000       50       20.000
- 13       52       19.230       62       16.000
- 14       56       17.857       62       16.000
- 15       60       16.666       62       16.000
- 16       64       15.625       75       13.333
- 17       68       14.705       75       13.333
- 18       72       13.888       75       13.333
- 19       76       13.157       87       11.428
- 20       80       12.500       87       11.428
- 21       84       11.904       87       11.428
- 22       88       11.363       93       10.666
- 23       92       10.869       93       10.666
- 24       96       10.416      100       10.000
- 25      100       10.000      100       10.000
- 26      104        9.615      112        8.888
- 27      108        9.259      112        8.888
- 28      112        8.928      112        8.888
- 29      116        8.620      125        8.000
- 30      120        8.333      125        8.000
- 31      124        8.064      125        8.000
- 32      128        7.812      131        7.619
- 33      132        7.575      150        6.666
- 34      136        7.352      150        6.666
- 35      140        7.142      150        6.666
- 36      144        6.944      150        6.666
- 37      148        6.756      150        6.666
- 38      152        6.578      175        5.714
- 39      156        6.410      175        5.714
- 40      160        6.250      175        5.714
- 41      164        6.097      175        5.714
- 42      168        5.952      175        5.714
- 43      172        5.813      175        5.714
- 44      176        5.681      187        5.333
- 45      180        5.555      187        5.333
- 46      184        5.434      187        5.333
- 47      188        5.319      200        5.000
- 48      192        5.208      200        5.000
- 49      196        5.102      200        5.000
-
-
-16.2 Synchronous timings for fast SCSI-2 53C8XX controllers
-
- ----------------------------------------------
- Negotiated                     NCR settings
- Factor   Period   Speed        Period   Speed
- ------   ------   ------       ------   ------
- 25      100       10.000      100       10.000
- 26      104        9.615      125        8.000
- 27      108        9.259      125        8.000
- 28      112        8.928      125        8.000
- 29      116        8.620      125        8.000
- 30      120        8.333      125        8.000
- 31      124        8.064      125        8.000
- 32      128        7.812      131        7.619
- 33      132        7.575      150        6.666
- 34      136        7.352      150        6.666
- 35      140        7.142      150        6.666
- 36      144        6.944      150        6.666
- 37      148        6.756      150        6.666
- 38      152        6.578      175        5.714
- 39      156        6.410      175        5.714
- 40      160        6.250      175        5.714
- 41      164        6.097      175        5.714
- 42      168        5.952      175        5.714
- 43      172        5.813      175        5.714
- 44      176        5.681      187        5.333
- 45      180        5.555      187        5.333
- 46      184        5.434      187        5.333
- 47      188        5.319      200        5.000
- 48      192        5.208      200        5.000
- 49      196        5.102      200        5.000
-
-
-17. Serial NVRAM (added by Richard Waltham: dormouse@farsrobt.demon.co.uk)
-
-17.1 Features
-
-Enabling serial NVRAM support enables detection of the serial NVRAM included
-on Symbios and some Symbios compatible host adaptors, and Tekram boards. The 
-serial NVRAM is used by Symbios and Tekram to hold set up parameters for the 
-host adaptor and its attached drives.
-
-The Symbios NVRAM also holds data on the boot order of host adaptors in a
-system with more than one host adaptor. This enables the order of scanning
-the cards for drives to be changed from the default used during host adaptor
-detection.
-
-This can be done to a limited extent at the moment using "reverse probe" but
-this only changes the order of detection of different types of cards. The
-NVRAM boot order settings can do this as well as change the order the same
-types of cards are scanned in, something "reverse probe" cannot do.
-
-Tekram boards using Symbios chips, DC390W/F/U, which have NVRAM are detected
-and this is used to distinguish between Symbios compatible and Tekram host 
-adaptors. This is used to disable the Symbios compatible "diff" setting
-incorrectly set on Tekram boards if the CONFIG_SCSI_53C8XX_SYMBIOS_COMPAT 
-configuration parameter is set enabling both Symbios and Tekram boards to be 
-used together with the Symbios cards using all their features, including
-"diff" support. ("led pin" support for Symbios compatible cards can remain
-enabled when using Tekram cards. It does nothing useful for Tekram host
-adaptors but does not cause problems either.)
-
-
-17.2 Symbios NVRAM layout
-
-typical data at NVRAM address 0x100 (53c810a NVRAM)
------------------------------------------------------------
-00 00
-64 01
-8e 0b
-
-00 30 00 00 00 00 07 00 00 00 00 00 00 00 07 04 10 04 00 00 
-
-04 00 0f 00 00 10 00 50 00 00 01 00 00 62 
-04 00 03 00 00 10 00 58 00 00 01 00 00 63 
-04 00 01 00 00 10 00 48 00 00 01 00 00 61 
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 
-
-0f 00 08 08 64 00 0a 00
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-
-00 00 00 00 00 00 00 00 
-00 00 00 00 00 00 00 00 
-00 00 00 00 00 00 00 00 
-00 00 00 00 00 00 00 00 
-00 00 00 00 00 00 00 00 
-00 00 00 00 00 00 00 00 
-00 00 00 00 00 00 00 00 
-00 00 00 00 00 00 00 00 
-
-00 00 00 00 00 00 00 00 
-00 00 00 00 00 00 00 00 
-00 00 00 00 00 00 00 00 
-00 00 00 00 00 00 00 00 
-00 00 00 00 00 00 00 00 
-00 00 00 00 00 00 00 00 
-00 00 00 00 00 00 00 00 
-00 00 00 00 00 00 00 00 
-
-00 00 00 00 00 00 00 00 
-00 00 00 00 00 00 00 00 
-00 00 00 00 00 00 00 00 
-
-fe fe
-00 00
-00 00
------------------------------------------------------------
-NVRAM layout details
-
-NVRAM Address 0x000-0x0ff not used
-              0x100-0x26f initialised data
-              0x270-0x7ff not used
-
-general layout
-
-        header  -   6 bytes,
-        data    - 356 bytes (checksum is byte sum of this data)
-        trailer -   6 bytes
-                  ---
-        total     368 bytes
-
-data area layout
-
-        controller set up  -  20 bytes
-        boot configuration -  56 bytes (4x14 bytes)
-        device set up      - 128 bytes (16x8 bytes)
-        unused (spare?)    - 152 bytes (19x8 bytes)
-                             ---
-        total                356 bytes
-
------------------------------------------------------------
-header
-
-00 00   - ?? start marker
-64 01   - byte count (lsb/msb excludes header/trailer)
-8e 0b   - checksum (lsb/msb excludes header/trailer)
------------------------------------------------------------
-controller set up
-
-00 30 00 00 00 00 07 00 00 00 00 00 00 00 07 04 10 04 00 00
-                   |     |           |     |
-                   |     |           |      -- host ID
-                   |     |           |
-                   |     |            --Removable Media Support
-                   |     |               0x00 = none
-                   |     |               0x01 = Bootable Device
-                   |     |               0x02 = All with Media
-                   |     |
-                   |      --flag bits 2
-                   |        0x00000001= scan order hi->low
-                   |            (default 0x00 - scan low->hi)
-                    --flag bits 1
-                       0x00000001 scam enable
-                       0x00000010 parity enable
-                       0x00000100 verbose boot msgs
-
-remaining bytes unknown - they do not appear to change in my
-current set up for any of the controllers.
-
-default set up is identical for 53c810a and 53c875 NVRAM
-(Removable Media added Symbios BIOS version 4.09)
------------------------------------------------------------
-boot configuration
-
-boot order set by order of the devices in this table
-
-04 00 0f 00 00 10 00 50 00 00 01 00 00 62 -- 1st controller
-04 00 03 00 00 10 00 58 00 00 01 00 00 63    2nd controller
-04 00 01 00 00 10 00 48 00 00 01 00 00 61    3rd controller
-00 00 00 00 00 00 00 00 00 00 00 00 00 00    4th controller
-       |  |  |  |     |        |     |  |
-       |  |  |  |     |        |      ---- PCI io port adr
-       |  |  |  |     |         --0x01 init/scan at boot time
-       |  |  |  |      --PCI device/function number (0xdddddfff)
-       |  |   ----- ?? PCI vendor ID (lsb/msb)
-        ----PCI device ID (lsb/msb)
-
-?? use of this data is a guess but seems reasonable
-
-remaining bytes unknown - they do not appear to change in my
-current set up
-
-default set up is identical for 53c810a and 53c875 NVRAM
------------------------------------------------------------
-device set up (up to 16 devices - includes controller)
-
-0f 00 08 08 64 00 0a 00 - id 0
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 - id 15
- |     |  |  |     |  |
- |     |  |  |      ----timeout (lsb/msb)
- |     |  |   --synch period (0x?? 40 Mtrans/sec- fast 40) (probably 0x28)
- |     |  |                  (0x30 20 Mtrans/sec- fast 20)
- |     |  |                  (0x64 10 Mtrans/sec- fast )
- |     |  |                  (0xc8  5 Mtrans/sec)
- |     |  |                  (0x00  asynchronous)
- |     |   -- ?? max sync offset (0x08 in NVRAM on 53c810a) 
- |     |                         (0x10 in NVRAM on 53c875)
- |      --device bus width (0x08 narrow)
- |                         (0x10 16 bit wide)
-  --flag bits
-    0x00000001 - disconnect enabled
-    0x00000010 - scan at boot time
-    0x00000100 - scan luns
-    0x00001000 - queue tags enabled
-
-remaining bytes unknown - they do not appear to change in my
-current set up
-
-?? use of this data is a guess but seems reasonable 
-(but it could be max bus width)
-
-default set up for 53c810a NVRAM
-default set up for 53c875 NVRAM - bus width     - 0x10
-                                - sync offset ? - 0x10
-                                - sync period   - 0x30
------------------------------------------------------------
-?? spare device space (32 bit bus ??)
-
-00 00 00 00 00 00 00 00  (19x8bytes)
-.
-.
-00 00 00 00 00 00 00 00
-
-default set up is identical for 53c810a and 53c875 NVRAM
------------------------------------------------------------
-trailer
-
-fe fe   - ? end marker ?
-00 00
-00 00
-
-default set up is identical for 53c810a and 53c875 NVRAM
------------------------------------------------------------
-
-
-
-17.3 Tekram NVRAM layout
-
-nvram 64x16 (1024 bit)
-
-Drive settings
-
-Drive ID 0-15 (addr 0x0yyyy0 = device setup, yyyy = ID)
-              (addr 0x0yyyy1 = 0x0000)
-
-    x x x x  x x x x  x x x x  x x x x
-               | | |      | |  | | | |
-               | | |      | |  | | |  ----- parity check   0 - off
-               | | |      | |  | | |                       1 - on
-               | | |      | |  | | |
-               | | |      | |  | |  ------- sync neg       0 - off
-               | | |      | |  | |                         1 - on
-               | | |      | |  | |
-               | | |      | |  |  --------- disconnect     0 - off
-               | | |      | |  |                           1 - on
-               | | |      | |  |
-               | | |      | |   ----------- start cmd      0 - off
-               | | |      | |                              1 - on
-               | | |      | |
-               | | |      |  -------------- tagged cmds    0 - off
-               | | |      |                                1 - on
-               | | |      | 
-               | | |       ---------------- wide neg       0 - off
-               | | |                                       1 - on
-               | | |
-                --------------------------- sync rate      0 - 10.0 Mtrans/sec
-                                                           1 -  8.0
-                                                           2 -  6.6
-                                                           3 -  5.7
-                                                           4 -  5.0
-                                                           5 -  4.0
-                                                           6 -  3.0
-                                                           7 -  2.0
-                                                           7 -  2.0
-                                                           8 - 20.0
-                                                           9 - 16.7
-                                                           a - 13.9
-                                                           b - 11.9
-
-Global settings
-
-Host flags 0 (addr 0x100000, 32) 
-
-    x x x x  x x x x  x x x x  x x x x
-    | | | |  | | | |           | | | |
-    | | | |  | | | |            ----------- host ID    0x00 - 0x0f
-    | | | |  | | | |
-    | | | |  | | |  ----------------------- support for    0 - off
-    | | | |  | | |                          > 2 drives     1 - on
-    | | | |  | | | 
-    | | | |  | |  ------------------------- support drives 0 - off
-    | | | |  | |                            > 1Gbytes      1 - on
-    | | | |  | |
-    | | | |  |  --------------------------- bus reset on   0 - off
-    | | | |  |                                power on     1 - on
-    | | | |  |
-    | | | |   ----------------------------- active neg     0 - off
-    | | | |                                                1 - on
-    | | | |
-    | | |  -------------------------------- imm seek       0 - off
-    | | |                                                  1 - on
-    | | |
-    | |  ---------------------------------- scan luns      0 - off
-    | |                                                    1 - on
-    | |
-     -------------------------------------- removable      0 - disable
-                                            as BIOS dev    1 - boot device
-                                                           2 - all
-
-Host flags 1 (addr 0x100001, 33)
-
-    x x x x  x x x x  x x x x  x x x x
-               | | |             | | | 
-               | | |              --------- boot delay     0 -   3 sec
-               | | |                                       1 -   5
-               | | |                                       2 -  10
-               | | |                                       3 -  20
-               | | |                                       4 -  30
-               | | |                                       5 -  60
-               | | |                                       6 - 120
-               | | |
-                --------------------------- max tag cmds   0 -  2
-                                                           1 -  4
-                                                           2 -  8
-                                                           3 - 16
-                                                           4 - 32
-
-Host flags 2 (addr 0x100010, 34)
-
-    x x x x  x x x x  x x x x  x x x x
-                                     |
-                                      ----- F2/F6 enable   0 - off ???
-                                                           1 - on  ???
-
-checksum (addr 0x111111)
-
-checksum = 0x1234 - (sum addr 0-63)
-
-----------------------------------------------------------------------------
-
-default nvram data:
-
-0x0037 0x0000 0x0037 0x0000 0x0037 0x0000 0x0037 0x0000
-0x0037 0x0000 0x0037 0x0000 0x0037 0x0000 0x0037 0x0000
-0x0037 0x0000 0x0037 0x0000 0x0037 0x0000 0x0037 0x0000
-0x0037 0x0000 0x0037 0x0000 0x0037 0x0000 0x0037 0x0000 
-
-0x0f07 0x0400 0x0001 0x0000 0x0000 0x0000 0x0000 0x0000
-0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
-0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
-0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0xfbbc
-
-
-18. Support for Big Endian
-
-The PCI local bus has been primarily designed for x86 architecture.
-As a consequence, PCI devices generally expect DWORDS using little endian 
-byte ordering.
-
-18.1 Big Endian CPU
-
-In order to support NCR chips on a Big Endian architecture the driver has to 
-perform byte reordering each time it is needed. This feature has been 
-added to the driver by Cort <cort@cs.nmt.edu> and is available in driver 
-version 2.5 and later ones. For the moment Big Endian support has only 
-been tested on Linux/PPC (PowerPC).
-
-18.2 NCR chip in Big Endian mode of operations
-
-It can be read in SYMBIOS documentation that some chips support a special 
-Big Endian mode, on paper: 53C815, 53C825A, 53C875, 53C875N, 53C895.
-This mode of operations is not software-selectable, but needs pin named 
-BigLit to be pulled-up. Using this mode, most of byte reorderings should 
-be avoided when the driver is running on a Big Endian CPU.
-Driver version 2.5 is also, in theory, ready for this feature.
-
-===============================================================================
-End of NCR53C8XX driver README file
diff --git a/Documentation/scsi/ppa.rst b/Documentation/scsi/ppa.rst
new file mode 100644
index 0000000..5fe3859
--- /dev/null
+++ b/Documentation/scsi/ppa.rst
@@ -0,0 +1,18 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+======================================
+Terse where to get ZIP Drive help info
+======================================
+
+General Iomega ZIP drive page for Linux:
+http://web.archive.org/web/%2E/http://www.torque.net/~campbell/
+
+Driver archive for old drivers:
+http://web.archive.org/web/%2E/http://www.torque.net/~campbell/ppa
+
+Linux Parport page (parallel port)
+http://web.archive.org/web/%2E/http://www.torque.net/parport/
+
+Email list for Linux Parport
+linux-parport@torque.net
+
diff --git a/Documentation/scsi/ppa.txt b/Documentation/scsi/ppa.txt
deleted file mode 100644
index 05ff47d..0000000
--- a/Documentation/scsi/ppa.txt
+++ /dev/null
@@ -1,14 +0,0 @@
--------- Terse where to get ZIP Drive help info --------
-
-General Iomega ZIP drive page for Linux:
-http://web.archive.org/web/*/http://www.torque.net/~campbell/
-
-Driver archive for old drivers:
-http://web.archive.org/web/*/http://www.torque.net/~campbell/ppa
-
-Linux Parport page (parallel port)
-http://web.archive.org/web/*/http://www.torque.net/parport/
-
-Email list for Linux Parport
-linux-parport@torque.net
-
diff --git a/Documentation/scsi/qlogicfas.rst b/Documentation/scsi/qlogicfas.rst
new file mode 100644
index 0000000..b17f1b3
--- /dev/null
+++ b/Documentation/scsi/qlogicfas.rst
@@ -0,0 +1,87 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=================================
+Qlogic FASXXX Family Driver Notes
+=================================
+
+This driver supports the Qlogic FASXXX family of chips.  This driver
+only works with the ISA, VLB, and PCMCIA versions of the Qlogic
+FastSCSI!  cards as well as any other card based on the FASXX chip
+(including the Control Concepts SCSI/IDE/SIO/PIO/FDC cards).
+
+This driver does NOT support the PCI version.  Support for these PCI
+Qlogic boards:
+
+	* IQ-PCI
+	* IQ-PCI-10
+	* IQ-PCI-D
+
+is provided by the qla1280 driver.
+
+Nor does it support the PCI-Basic, which is supported by the
+'am53c974' driver.
+
+PCMCIA Support
+==============
+
+This currently only works if the card is enabled first from DOS.  This
+means you will have to load your socket and card services, and
+QL41DOS.SYS and QL40ENBL.SYS.  These are a minimum, but loading the
+rest of the modules won't interfere with the operation.  The next
+thing to do is load the kernel without resetting the hardware, which
+can be a simple ctrl-alt-delete with a boot floppy, or by using
+loadlin with the kernel image accessible from DOS.  If you are using
+the Linux PCMCIA driver, you will have to adjust it or otherwise stop
+it from configuring the card.
+
+I am working with the PCMCIA group to make it more flexible, but that
+may take a while.
+
+All Cards
+=========
+
+The top of the qlogic.c file has a number of defines that controls
+configuration.  As shipped, it provides a balance between speed and
+function.  If there are any problems, try setting SLOW_CABLE to 1, and
+then try changing USE_IRQ and TURBO_PDMA to zero.  If you are familiar
+with SCSI, there are other settings which can tune the bus.
+
+It may be a good idea to enable RESET_AT_START, especially if the
+devices may not have been just powered up, or if you are restarting
+after a crash, since they may be busy trying to complete the last
+command or something.  It comes up faster if this is set to zero, and
+if you have reliable hardware and connections it may be more useful to
+not reset things.
+
+Some Troubleshooting Tips
+=========================
+
+Make sure it works properly under DOS.  You should also do an initial FDISK
+on a new drive if you want partitions.
+
+Don't enable all the speedups first.  If anything is wrong, they will make
+any problem worse.
+
+Important
+=========
+
+The best way to test if your cables, termination, etc. are good is to
+copy a very big file (e.g. a doublespace container file, or a very
+large executable or archive).  It should be at least 5 megabytes, but
+you can do multiple tests on smaller files.  Then do a COMP to verify
+that the file copied properly.  (Turn off all caching when doing these
+tests, otherwise you will test your RAM and not the files).  Then do
+10 COMPs, comparing the same file on the SCSI hard drive, i.e. "COMP
+realbig.doc realbig.doc".  Then do it after the computer gets warm.
+
+I noticed my system which seems to work 100% would fail this test if
+the computer was left on for a few hours.  It was worse with longer
+cables, and more devices on the SCSI bus.  What seems to happen is
+that it gets a false ACK causing an extra byte to be inserted into the
+stream (and this is not detected).  This can be caused by bad
+termination (the ACK can be reflected), or by noise when the chips
+work less well because of the heat, or when cables get too long for
+the speed.
+
+Remember, if it doesn't work under DOS, it probably won't work under
+Linux.
diff --git a/Documentation/scsi/qlogicfas.txt b/Documentation/scsi/qlogicfas.txt
deleted file mode 100644
index c211d82..0000000
--- a/Documentation/scsi/qlogicfas.txt
+++ /dev/null
@@ -1,78 +0,0 @@
-
-This driver supports the Qlogic FASXXX family of chips.  This driver
-only works with the ISA, VLB, and PCMCIA versions of the Qlogic
-FastSCSI!  cards as well as any other card based on the FASXX chip
-(including the Control Concepts SCSI/IDE/SIO/PIO/FDC cards).
-
-This driver does NOT support the PCI version.  Support for these PCI
-Qlogic boards:
-
-	* IQ-PCI
-	* IQ-PCI-10
-	* IQ-PCI-D
-
-is provided by the qla1280 driver.
-
-Nor does it support the PCI-Basic, which is supported by the
-'am53c974' driver.
-
-PCMCIA SUPPORT
-
-This currently only works if the card is enabled first from DOS.  This
-means you will have to load your socket and card services, and
-QL41DOS.SYS and QL40ENBL.SYS.  These are a minimum, but loading the
-rest of the modules won't interfere with the operation.  The next
-thing to do is load the kernel without resetting the hardware, which
-can be a simple ctrl-alt-delete with a boot floppy, or by using
-loadlin with the kernel image accessible from DOS.  If you are using
-the Linux PCMCIA driver, you will have to adjust it or otherwise stop
-it from configuring the card.
-
-I am working with the PCMCIA group to make it more flexible, but that
-may take a while.
-
-ALL CARDS
-
-The top of the qlogic.c file has a number of defines that controls
-configuration.  As shipped, it provides a balance between speed and
-function.  If there are any problems, try setting SLOW_CABLE to 1, and
-then try changing USE_IRQ and TURBO_PDMA to zero.  If you are familiar
-with SCSI, there are other settings which can tune the bus.
-
-It may be a good idea to enable RESET_AT_START, especially if the
-devices may not have been just powered up, or if you are restarting
-after a crash, since they may be busy trying to complete the last
-command or something.  It comes up faster if this is set to zero, and
-if you have reliable hardware and connections it may be more useful to
-not reset things.
-
-SOME TROUBLESHOOTING TIPS
-
-Make sure it works properly under DOS.  You should also do an initial FDISK
-on a new drive if you want partitions.
-
-Don't enable all the speedups first.  If anything is wrong, they will make
-any problem worse.
-
-IMPORTANT
-
-The best way to test if your cables, termination, etc. are good is to
-copy a very big file (e.g. a doublespace container file, or a very
-large executable or archive).  It should be at least 5 megabytes, but
-you can do multiple tests on smaller files.  Then do a COMP to verify
-that the file copied properly.  (Turn off all caching when doing these
-tests, otherwise you will test your RAM and not the files).  Then do
-10 COMPs, comparing the same file on the SCSI hard drive, i.e. "COMP
-realbig.doc realbig.doc".  Then do it after the computer gets warm.
-
-I noticed my system which seems to work 100% would fail this test if
-the computer was left on for a few hours.  It was worse with longer
-cables, and more devices on the SCSI bus.  What seems to happen is
-that it gets a false ACK causing an extra byte to be inserted into the
-stream (and this is not detected).  This can be caused by bad
-termination (the ACK can be reflected), or by noise when the chips
-work less well because of the heat, or when cables get too long for
-the speed.
-
-Remember, if it doesn't work under DOS, it probably won't work under
-Linux.
diff --git a/Documentation/scsi/scsi-changer.rst b/Documentation/scsi/scsi-changer.rst
new file mode 100644
index 0000000..ab60e7e
--- /dev/null
+++ b/Documentation/scsi/scsi-changer.rst
@@ -0,0 +1,184 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+========================================
+README for the SCSI media changer driver
+========================================
+
+This is a driver for SCSI Medium Changer devices, which are listed
+with "Type: Medium Changer" in /proc/scsi/scsi.
+
+This is for *real* Jukeboxes.  It is *not* supported to work with
+common small CD-ROM changers, neither one-lun-per-slot SCSI changers
+nor IDE drives.
+
+Userland tools available from here:
+	http://linux.bytesex.org/misc/changer.html
+
+
+General Information
+-------------------
+
+First some words about how changers work: A changer has 2 (possibly
+more) SCSI ID's. One for the changer device which controls the robot,
+and one for the device which actually reads and writes the data. The
+later may be anything, a MOD, a CD-ROM, a tape or whatever. For the
+changer device this is a "don't care", he *only* shuffles around the
+media, nothing else.
+
+
+The SCSI changer model is complex, compared to - for example - IDE-CD
+changers. But it allows to handle nearly all possible cases. It knows
+4 different types of changer elements:
+
+  ===============   ==================================================
+  media transport   this one shuffles around the media, i.e. the
+                    transport arm.  Also known as "picker".
+  storage           a slot which can hold a media.
+  import/export     the same as above, but is accessible from outside,
+                    i.e. there the operator (you !) can use this to
+                    fill in and remove media from the changer.
+		    Sometimes named "mailslot".
+  data transfer     this is the device which reads/writes, i.e. the
+		    CD-ROM / Tape / whatever drive.
+  ===============   ==================================================
+
+None of these is limited to one: A huge Jukebox could have slots for
+123 CD-ROM's, 5 CD-ROM readers (and therefore 6 SCSI ID's: the changer
+and each CD-ROM) and 2 transport arms. No problem to handle.
+
+
+How it is implemented
+---------------------
+
+I implemented the driver as character device driver with a NetBSD-like
+ioctl interface. Just grabbed NetBSD's header file and one of the
+other linux SCSI device drivers as starting point. The interface
+should be source code compatible with NetBSD. So if there is any
+software (anybody knows ???) which supports a BSDish changer driver,
+it should work with this driver too.
+
+Over time a few more ioctls where added, volume tag support for example
+wasn't covered by the NetBSD ioctl API.
+
+
+Current State
+-------------
+
+Support for more than one transport arm is not implemented yet (and
+nobody asked for it so far...).
+
+I test and use the driver myself with a 35 slot cdrom jukebox from
+Grundig.  I got some reports telling it works ok with tape autoloaders
+(Exabyte, HP and DEC).  Some People use this driver with amanda.  It
+works fine with small (11 slots) and a huge (4 MOs, 88 slots)
+magneto-optical Jukebox.  Probably with lots of other changers too, most
+(but not all :-) people mail me only if it does *not* work...
+
+I don't have any device lists, neither black-list nor white-list.  Thus
+it is quite useless to ask me whenever a specific device is supported or
+not.  In theory every changer device which supports the SCSI-2 media
+changer command set should work out-of-the-box with this driver.  If it
+doesn't, it is a bug.  Either within the driver or within the firmware
+of the changer device.
+
+
+Using it
+--------
+
+This is a character device with major number is 86, so use
+"mknod /dev/sch0 c 86 0" to create the special file for the driver.
+
+If the module finds the changer, it prints some messages about the
+device [ try "dmesg" if you don't see anything ] and should show up in
+/proc/devices. If not....  some changers use ID ? / LUN 0 for the
+device and ID ? / LUN 1 for the robot mechanism. But Linux does *not*
+look for LUNs other than 0 as default, because there are too many
+broken devices. So you can try:
+
+  1) echo "scsi add-single-device 0 0 ID 1" > /proc/scsi/scsi
+     (replace ID with the SCSI-ID of the device)
+  2) boot the kernel with "max_scsi_luns=1" on the command line
+     (append="max_scsi_luns=1" in lilo.conf should do the trick)
+
+
+Trouble?
+--------
+
+If you insmod the driver with "insmod debug=1", it will be verbose and
+prints a lot of stuff to the syslog.  Compiling the kernel with
+CONFIG_SCSI_CONSTANTS=y improves the quality of the error messages a lot
+because the kernel will translate the error codes into human-readable
+strings then.
+
+You can display these messages with the dmesg command (or check the
+logfiles).  If you email me some question because of a problem with the
+driver, please include these messages.
+
+
+Insmod options
+--------------
+
+debug=0/1
+	Enable debug messages (see above, default: 0).
+
+verbose=0/1
+	Be verbose (default: 1).
+
+init=0/1
+	Send INITIALIZE ELEMENT STATUS command to the changer
+	at insmod time (default: 1).
+
+timeout_init=<seconds>
+	timeout for the INITIALIZE ELEMENT STATUS command
+	(default: 3600).
+
+timeout_move=<seconds>
+	timeout for all other commands (default: 120).
+
+dt_id=<id1>,<id2>,... / dt_lun=<lun1>,<lun2>,...
+	These two allow to specify the SCSI ID and LUN for the data
+	transfer elements.  You likely don't need this as the jukebox
+	should provide this information.  But some devices don't ...
+
+vendor_firsts=, vendor_counts=, vendor_labels=
+	These insmod options can be used to tell the driver that there
+	are some vendor-specific element types.  Grundig for example
+	does this.  Some jukeboxes have a printer to label fresh burned
+	CDs, which is addressed as element 0xc000 (type 5).  To tell the
+	driver about this vendor-specific element, use this::
+
+		$ insmod ch			\
+			vendor_firsts=0xc000	\
+			vendor_counts=1		\
+			vendor_labels=printer
+
+	All three insmod options accept up to four comma-separated
+	values, this way you can configure the element types 5-8.
+	You likely need the SCSI specs for the device in question to
+	find the correct values as they are not covered by the SCSI-2
+	standard.
+
+
+Credits
+-------
+
+I wrote this driver using the famous mailing-patches-around-the-world
+method.  With (more or less) help from:
+
+	- Daniel Moehwald <moehwald@hdg.de>
+	- Dane Jasper <dane@sonic.net>
+	- R. Scott Bailey <sbailey@dsddi.eds.com>
+	- Jonathan Corbet <corbet@lwn.net>
+
+Special thanks go to
+
+	- Martin Kuehne <martin.kuehne@bnbt.de>
+
+for a old, second-hand (but full functional) cdrom jukebox which I use
+to develop/test driver and tools now.
+
+Have fun,
+
+   Gerd
+
+Gerd Knorr <kraxel@bytesex.org>
diff --git a/Documentation/scsi/scsi-changer.txt b/Documentation/scsi/scsi-changer.txt
deleted file mode 100644
index ade046e..0000000
--- a/Documentation/scsi/scsi-changer.txt
+++ /dev/null
@@ -1,180 +0,0 @@
-
-README for the SCSI media changer driver
-========================================
-
-This is a driver for SCSI Medium Changer devices, which are listed
-with "Type: Medium Changer" in /proc/scsi/scsi.
-
-This is for *real* Jukeboxes.  It is *not* supported to work with
-common small CD-ROM changers, neither one-lun-per-slot SCSI changers
-nor IDE drives.
-
-Userland tools available from here:
-	http://linux.bytesex.org/misc/changer.html
-
-
-General Information
--------------------
-
-First some words about how changers work: A changer has 2 (possibly
-more) SCSI ID's. One for the changer device which controls the robot,
-and one for the device which actually reads and writes the data. The
-later may be anything, a MOD, a CD-ROM, a tape or whatever. For the
-changer device this is a "don't care", he *only* shuffles around the
-media, nothing else.
-
-
-The SCSI changer model is complex, compared to - for example - IDE-CD
-changers. But it allows to handle nearly all possible cases. It knows
-4 different types of changer elements:
-
-  media transport - this one shuffles around the media, i.e. the
-                    transport arm.  Also known as "picker".
-  storage         - a slot which can hold a media.
-  import/export   - the same as above, but is accessible from outside,
-                    i.e. there the operator (you !) can use this to
-                    fill in and remove media from the changer.
-		    Sometimes named "mailslot".
-  data transfer   - this is the device which reads/writes, i.e. the
-		    CD-ROM / Tape / whatever drive.
-
-None of these is limited to one: A huge Jukebox could have slots for
-123 CD-ROM's, 5 CD-ROM readers (and therefore 6 SCSI ID's: the changer
-and each CD-ROM) and 2 transport arms. No problem to handle.
-
-
-How it is implemented
----------------------
-
-I implemented the driver as character device driver with a NetBSD-like
-ioctl interface. Just grabbed NetBSD's header file and one of the
-other linux SCSI device drivers as starting point. The interface
-should be source code compatible with NetBSD. So if there is any
-software (anybody knows ???) which supports a BSDish changer driver,
-it should work with this driver too.
-
-Over time a few more ioctls where added, volume tag support for example
-wasn't covered by the NetBSD ioctl API.
-
-
-Current State
--------------
-
-Support for more than one transport arm is not implemented yet (and
-nobody asked for it so far...).
-
-I test and use the driver myself with a 35 slot cdrom jukebox from
-Grundig.  I got some reports telling it works ok with tape autoloaders
-(Exabyte, HP and DEC).  Some People use this driver with amanda.  It
-works fine with small (11 slots) and a huge (4 MOs, 88 slots)
-magneto-optical Jukebox.  Probably with lots of other changers too, most
-(but not all :-) people mail me only if it does *not* work...
-
-I don't have any device lists, neither black-list nor white-list.  Thus
-it is quite useless to ask me whenever a specific device is supported or
-not.  In theory every changer device which supports the SCSI-2 media
-changer command set should work out-of-the-box with this driver.  If it
-doesn't, it is a bug.  Either within the driver or within the firmware
-of the changer device.
-
-
-Using it
---------
-
-This is a character device with major number is 86, so use
-"mknod /dev/sch0 c 86 0" to create the special file for the driver.
-
-If the module finds the changer, it prints some messages about the
-device [ try "dmesg" if you don't see anything ] and should show up in
-/proc/devices. If not....  some changers use ID ? / LUN 0 for the
-device and ID ? / LUN 1 for the robot mechanism. But Linux does *not*
-look for LUNs other than 0 as default, because there are too many
-broken devices. So you can try:
-
-  1) echo "scsi add-single-device 0 0 ID 1" > /proc/scsi/scsi
-     (replace ID with the SCSI-ID of the device)
-  2) boot the kernel with "max_scsi_luns=1" on the command line
-     (append="max_scsi_luns=1" in lilo.conf should do the trick)
-
-
-Trouble?
---------
-
-If you insmod the driver with "insmod debug=1", it will be verbose and
-prints a lot of stuff to the syslog.  Compiling the kernel with
-CONFIG_SCSI_CONSTANTS=y improves the quality of the error messages a lot
-because the kernel will translate the error codes into human-readable
-strings then.
-
-You can display these messages with the dmesg command (or check the
-logfiles).  If you email me some question because of a problem with the
-driver, please include these messages.
-
-
-Insmod options
---------------
-
-debug=0/1
-	Enable debug messages (see above, default: 0).
-
-verbose=0/1
-	Be verbose (default: 1).
-
-init=0/1
-	Send INITIALIZE ELEMENT STATUS command to the changer
-	at insmod time (default: 1).
-
-timeout_init=<seconds>
-	timeout for the INITIALIZE ELEMENT STATUS command
-	(default: 3600).
-
-timeout_move=<seconds>
-	timeout for all other commands (default: 120).
-
-dt_id=<id1>,<id2>,...
-dt_lun=<lun1>,<lun2>,...
-	These two allow to specify the SCSI ID and LUN for the data
-	transfer elements.  You likely don't need this as the jukebox
-	should provide this information.  But some devices don't ...
-
-vendor_firsts=
-vendor_counts=
-vendor_labels=
-	These insmod options can be used to tell the driver that there
-	are some vendor-specific element types.  Grundig for example
-	does this.  Some jukeboxes have a printer to label fresh burned
-	CDs, which is addressed as element 0xc000 (type 5).  To tell the
-	driver about this vendor-specific element, use this:
-		$ insmod ch			\
-			vendor_firsts=0xc000	\
-			vendor_counts=1		\
-			vendor_labels=printer
-	All three insmod options accept up to four comma-separated
-	values, this way you can configure the element types 5-8.
-	You likely need the SCSI specs for the device in question to
-	find the correct values as they are not covered by the SCSI-2
-	standard.
-
-
-Credits
--------
-
-I wrote this driver using the famous mailing-patches-around-the-world
-method.  With (more or less) help from:
-
-	Daniel Moehwald <moehwald@hdg.de>
-	Dane Jasper <dane@sonic.net>
-	R. Scott Bailey <sbailey@dsddi.eds.com>
-	Jonathan Corbet <corbet@lwn.net>
-
-Special thanks go to
-	Martin Kuehne <martin.kuehne@bnbt.de>
-for a old, second-hand (but full functional) cdrom jukebox which I use
-to develop/test driver and tools now.
-
-Have fun,
-
-   Gerd
-
--- 
-Gerd Knorr <kraxel@bytesex.org>
diff --git a/Documentation/scsi/scsi-generic.rst b/Documentation/scsi/scsi-generic.rst
new file mode 100644
index 0000000..258505e
--- /dev/null
+++ b/Documentation/scsi/scsi-generic.rst
@@ -0,0 +1,118 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=======================================
+Notes on Linux SCSI Generic (sg) driver
+=======================================
+
+                                                        20020126
+
+Introduction
+============
+The SCSI Generic driver (sg) is one of the four "high level" SCSI device
+drivers along with sd, st and sr (disk, tape and CDROM respectively). Sg
+is more generalized (but lower level) than its siblings and tends to be
+used on SCSI devices that don't fit into the already serviced categories.
+Thus sg is used for scanners, CD writers and reading audio CDs digitally
+amongst other things.
+
+Rather than document the driver's interface here, version information
+is provided plus pointers (i.e. URLs) where to find documentation
+and examples.
+
+
+Major versions of the sg driver
+===============================
+There are three major versions of sg found in the linux kernel (lk):
+      - sg version 1 (original) from 1992 to early 1999 (lk 2.2.5) .
+	It is based in the sg_header interface structure.
+      - sg version 2 from lk 2.2.6 in the 2.2 series. It is based on
+	an extended version of the sg_header interface structure.
+      - sg version 3 found in the lk 2.4 series (and the lk 2.5 series).
+	It adds the sg_io_hdr interface structure.
+
+
+Sg driver documentation
+=======================
+The most recent documentation of the sg driver is kept at the Linux
+Documentation Project's (LDP) site:
+
+- http://www.tldp.org/HOWTO/SCSI-Generic-HOWTO
+
+This describes the sg version 3 driver found in the lk 2.4 series.
+
+The LDP renders documents in single and multiple page HTML, postscript
+and pdf. This document can also be found at:
+
+- http://sg.danny.cz/sg/p/sg_v3_ho.html
+
+Documentation for the version 2 sg driver found in the lk 2.2 series can
+be found at http://sg.danny.cz/sg/. A larger version
+is at: http://sg.danny.cz/sg/p/scsi-generic_long.txt.
+
+The original documentation for the sg driver (prior to lk 2.2.6) can be
+found at http://www.torque.net/sg/p/original/SCSI-Programming-HOWTO.txt
+and in the LDP archives.
+
+A changelog with brief notes can be found in the
+/usr/src/linux/include/scsi/sg.h file. Note that the glibc maintainers copy
+and edit this file (removing its changelog for example) before placing it
+in /usr/include/scsi/sg.h . Driver debugging information and other notes
+can be found at the top of the /usr/src/linux/drivers/scsi/sg.c file.
+
+A more general description of the Linux SCSI subsystem of which sg is a
+part can be found at http://www.tldp.org/HOWTO/SCSI-2.4-HOWTO .
+
+
+Example code and utilities
+==========================
+There are two packages of sg utilities:
+
+    =========   ==========================================================
+    sg3_utils   for the sg version 3 driver found in lk 2.4
+    sg_utils    for the sg version 2 (and original) driver found in lk 2.2
+                and earlier
+    =========   ==========================================================
+
+Both packages will work in the lk 2.4 series however sg3_utils offers more
+capabilities. They can be found at: http://sg.danny.cz/sg/sg3_utils.html and
+freecode.com
+
+Another approach is to look at the applications that use the sg driver.
+These include cdrecord, cdparanoia, SANE and cdrdao.
+
+
+Mapping of Linux kernel versions to sg driver versions
+======================================================
+Here is a list of linux kernels in the 2.4 series that had new version
+of the sg driver:
+
+     - lk 2.4.0 : sg version 3.1.17
+     - lk 2.4.7 : sg version 3.1.19
+     - lk 2.4.10 : sg version 3.1.20 [#]_
+     - lk 2.4.17 : sg version 3.1.22
+
+.. [#] There were 3 changes to sg version 3.1.20 by third parties in the
+       next six linux kernel versions.
+
+For reference here is a list of linux kernels in the 2.2 series that had
+new version of the sg driver:
+
+     - lk 2.2.0 : original sg version [with no version number]
+     - lk 2.2.6 : sg version 2.1.31
+     - lk 2.2.8 : sg version 2.1.32
+     - lk 2.2.10 : sg version 2.1.34 [SG_GET_VERSION_NUM ioctl first appeared]
+     - lk 2.2.14 : sg version 2.1.36
+     - lk 2.2.16 : sg version 2.1.38
+     - lk 2.2.17 : sg version 2.1.39
+     - lk 2.2.20 : sg version 2.1.40
+
+The lk 2.5 development series has recently commenced and it currently
+contains sg version 3.5.23 which is functionally equivalent to sg
+version 3.1.22 found in lk 2.4.17.
+
+
+Douglas Gilbert
+
+26th January 2002
+
+dgilbert@interlog.com
diff --git a/Documentation/scsi/scsi-generic.txt b/Documentation/scsi/scsi-generic.txt
deleted file mode 100644
index 51be20a..0000000
--- a/Documentation/scsi/scsi-generic.txt
+++ /dev/null
@@ -1,101 +0,0 @@
-            Notes on Linux SCSI Generic (sg) driver
-            ---------------------------------------
-                                                        20020126
-Introduction
-============
-The SCSI Generic driver (sg) is one of the four "high level" SCSI device
-drivers along with sd, st and sr (disk, tape and CDROM respectively). Sg
-is more generalized (but lower level) than its siblings and tends to be
-used on SCSI devices that don't fit into the already serviced categories.
-Thus sg is used for scanners, CD writers and reading audio CDs digitally
-amongst other things.
-
-Rather than document the driver's interface here, version information
-is provided plus pointers (i.e. URLs) where to find documentation
-and examples.
-
-
-Major versions of the sg driver
-===============================
-There are three major versions of sg found in the linux kernel (lk):
-      - sg version 1 (original) from 1992 to early 1999 (lk 2.2.5) . 
-	It is based in the sg_header interface structure.
-      - sg version 2 from lk 2.2.6 in the 2.2 series. It is based on
-	an extended version of the sg_header interface structure.
-      - sg version 3 found in the lk 2.4 series (and the lk 2.5 series).
-	It adds the sg_io_hdr interface structure.
-
-
-Sg driver documentation
-=======================
-The most recent documentation of the sg driver is kept at the Linux
-Documentation Project's (LDP) site: 
-http://www.tldp.org/HOWTO/SCSI-Generic-HOWTO
-This describes the sg version 3 driver found in the lk 2.4 series.
-The LDP renders documents in single and multiple page HTML, postscript
-and pdf. This document can also be found at:
-http://sg.danny.cz/sg/p/sg_v3_ho.html
-
-Documentation for the version 2 sg driver found in the lk 2.2 series can
-be found at http://sg.danny.cz/sg/. A larger version
-is at: http://sg.danny.cz/sg/p/scsi-generic_long.txt.
-
-The original documentation for the sg driver (prior to lk 2.2.6) can be
-found at http://www.torque.net/sg/p/original/SCSI-Programming-HOWTO.txt
-and in the LDP archives.
-
-A changelog with brief notes can be found in the
-/usr/src/linux/include/scsi/sg.h file. Note that the glibc maintainers copy 
-and edit this file (removing its changelog for example) before placing it 
-in /usr/include/scsi/sg.h . Driver debugging information and other notes 
-can be found at the top of the /usr/src/linux/drivers/scsi/sg.c file.
-
-A more general description of the Linux SCSI subsystem of which sg is a 
-part can be found at http://www.tldp.org/HOWTO/SCSI-2.4-HOWTO .
-
-
-Example code and utilities
-==========================
-There are two packages of sg utilities:
-  - sg3_utils   for the sg version 3 driver found in lk 2.4
-  - sg_utils    for the sg version 2 (and original) driver found in lk 2.2
-                and earlier
-Both packages will work in the lk 2.4 series however sg3_utils offers more
-capabilities. They can be found at: http://sg.danny.cz/sg/sg3_utils.html and 
-freecode.com
-
-Another approach is to look at the applications that use the sg driver.
-These include cdrecord, cdparanoia, SANE and cdrdao.
-
-
-Mapping of Linux kernel versions to sg driver versions
-======================================================
-Here is a list of linux kernels in the 2.4 series that had new version
-of the sg driver:
-      lk 2.4.0 : sg version 3.1.17
-      lk 2.4.7 : sg version 3.1.19 
-      lk 2.4.10 : sg version 3.1.20  **
-      lk 2.4.17 : sg version 3.1.22 
-
-** There were 3 changes to sg version 3.1.20 by third parties in the
-   next six linux kernel versions.
-
-For reference here is a list of linux kernels in the 2.2 series that had 
-new version of the sg driver:
-      lk 2.2.0 : original sg version [with no version number]
-      lk 2.2.6 : sg version 2.1.31
-      lk 2.2.8 : sg version 2.1.32
-      lk 2.2.10 : sg version 2.1.34 [SG_GET_VERSION_NUM ioctl first appeared]
-      lk 2.2.14 : sg version 2.1.36
-      lk 2.2.16 : sg version 2.1.38
-      lk 2.2.17 : sg version 2.1.39
-      lk 2.2.20 : sg version 2.1.40
-
-The lk 2.5 development series has recently commenced and it currently
-contains sg version 3.5.23 which is functionally equivalent to sg
-version 3.1.22 found in lk 2.4.17 .
-
-
-Douglas Gilbert
-26th January 2002
-dgilbert@interlog.com
diff --git a/Documentation/scsi/scsi-parameters.rst b/Documentation/scsi/scsi-parameters.rst
new file mode 100644
index 0000000..9aba897
--- /dev/null
+++ b/Documentation/scsi/scsi-parameters.rst
@@ -0,0 +1,111 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+======================
+SCSI Kernel Parameters
+======================
+
+See Documentation/admin-guide/kernel-parameters.rst for general information on
+specifying module parameters.
+
+This document may not be entirely up to date and comprehensive. The command
+``modinfo -p ${modulename}`` shows a current list of all parameters of a loadable
+module. Loadable modules, after being loaded into the running kernel, also
+reveal their parameters in /sys/module/${modulename}/parameters/. Some of these
+parameters may be changed at runtime by the command
+``echo -n ${value} > /sys/module/${modulename}/parameters/${parm}``.
+
+::
+
+	advansys=	[HW,SCSI]
+			See header of drivers/scsi/advansys.c.
+
+	aha152x=	[HW,SCSI]
+			See Documentation/scsi/aha152x.rst.
+
+	aha1542=	[HW,SCSI]
+			Format: <portbase>[,<buson>,<busoff>[,<dmaspeed>]]
+
+	aic7xxx=	[HW,SCSI]
+			See Documentation/scsi/aic7xxx.rst.
+
+	aic79xx=	[HW,SCSI]
+			See Documentation/scsi/aic79xx.rst.
+
+	atascsi=	[HW,SCSI]
+			See drivers/scsi/atari_scsi.c.
+
+	BusLogic=	[HW,SCSI]
+			See drivers/scsi/BusLogic.c, comment before function
+			BusLogic_ParseDriverOptions().
+
+	gdth=		[HW,SCSI]
+			See header of drivers/scsi/gdth.c.
+
+	gvp11=		[HW,SCSI]
+
+	ips=		[HW,SCSI] Adaptec / IBM ServeRAID controller
+			See header of drivers/scsi/ips.c.
+
+	mac5380=	[HW,SCSI]
+			See drivers/scsi/mac_scsi.c.
+
+	scsi_mod.max_luns=
+			[SCSI] Maximum number of LUNs to probe.
+			Should be between 1 and 2^32-1.
+
+	scsi_mod.max_report_luns=
+			[SCSI] Maximum number of LUNs received.
+			Should be between 1 and 16384.
+
+	NCR_D700=	[HW,SCSI]
+			See header of drivers/scsi/NCR_D700.c.
+
+	ncr5380=	[HW,SCSI]
+			See Documentation/scsi/g_NCR5380.rst.
+
+	ncr53c400=	[HW,SCSI]
+			See Documentation/scsi/g_NCR5380.rst.
+
+	ncr53c400a=	[HW,SCSI]
+			See Documentation/scsi/g_NCR5380.rst.
+
+	ncr53c8xx=	[HW,SCSI]
+
+	osst=		[HW,SCSI] SCSI Tape Driver
+			Format: <buffer_size>,<write_threshold>
+			See also Documentation/scsi/st.rst.
+
+	scsi_debug_*=	[SCSI]
+			See drivers/scsi/scsi_debug.c.
+
+	scsi_mod.default_dev_flags=
+			[SCSI] SCSI default device flags
+			Format: <integer>
+
+	scsi_mod.dev_flags=
+			[SCSI] Black/white list entry for vendor and model
+			Format: <vendor>:<model>:<flags>
+			(flags are integer value)
+
+	scsi_mod.scsi_logging_level=
+			[SCSI] a bit mask of logging levels
+			See drivers/scsi/scsi_logging.h for bits.  Also
+			settable via sysctl at dev.scsi.logging_level
+			(/proc/sys/dev/scsi/logging_level).
+			There is also a nice 'scsi_logging_level' script in the
+			S390-tools package, available for download at
+			http://www-128.ibm.com/developerworks/linux/linux390/s390-tools-1.5.4.html
+
+	scsi_mod.scan=	[SCSI] sync (default) scans SCSI busses as they are
+			discovered.  async scans them in kernel threads,
+			allowing boot to proceed.  none ignores them, expecting
+			user space to do the scan.
+
+	sim710=		[SCSI,HW]
+			See header of drivers/scsi/sim710.c.
+
+	st=		[HW,SCSI] SCSI tape parameters (buffers, etc.)
+			See Documentation/scsi/st.rst.
+
+	wd33c93=	[HW,SCSI]
+			See header of drivers/scsi/wd33c93.c.
diff --git a/Documentation/scsi/scsi-parameters.txt b/Documentation/scsi/scsi-parameters.txt
deleted file mode 100644
index 25a4b4c..0000000
--- a/Documentation/scsi/scsi-parameters.txt
+++ /dev/null
@@ -1,107 +0,0 @@
-                          SCSI Kernel Parameters
-                          ~~~~~~~~~~~~~~~~~~~~~~
-
-See Documentation/admin-guide/kernel-parameters.rst for general information on
-specifying module parameters.
-
-This document may not be entirely up to date and comprehensive. The command
-"modinfo -p ${modulename}" shows a current list of all parameters of a loadable
-module. Loadable modules, after being loaded into the running kernel, also
-reveal their parameters in /sys/module/${modulename}/parameters/. Some of these
-parameters may be changed at runtime by the command
-"echo -n ${value} > /sys/module/${modulename}/parameters/${parm}".
-
-
-	advansys=	[HW,SCSI]
-			See header of drivers/scsi/advansys.c.
-
-	aha152x=	[HW,SCSI]
-			See Documentation/scsi/aha152x.txt.
-
-	aha1542=	[HW,SCSI]
-			Format: <portbase>[,<buson>,<busoff>[,<dmaspeed>]]
-
-	aic7xxx=	[HW,SCSI]
-			See Documentation/scsi/aic7xxx.txt.
-
-	aic79xx=	[HW,SCSI]
-			See Documentation/scsi/aic79xx.txt.
-
-	atascsi=	[HW,SCSI]
-			See drivers/scsi/atari_scsi.c.
-
-	BusLogic=	[HW,SCSI]
-			See drivers/scsi/BusLogic.c, comment before function
-			BusLogic_ParseDriverOptions().
-
-	gdth=		[HW,SCSI]
-			See header of drivers/scsi/gdth.c.
-
-	gvp11=		[HW,SCSI]
-
-	ips=		[HW,SCSI] Adaptec / IBM ServeRAID controller
-			See header of drivers/scsi/ips.c.
-
-	mac5380=	[HW,SCSI]
-			See drivers/scsi/mac_scsi.c.
-
-	scsi_mod.max_luns=
-			[SCSI] Maximum number of LUNs to probe.
-			Should be between 1 and 2^32-1.
-
-	scsi_mod.max_report_luns=
-			[SCSI] Maximum number of LUNs received.
-			Should be between 1 and 16384.
-
-	NCR_D700=	[HW,SCSI]
-			See header of drivers/scsi/NCR_D700.c.
-
-	ncr5380=	[HW,SCSI]
-			See Documentation/scsi/g_NCR5380.txt.
-
-	ncr53c400=	[HW,SCSI]
-			See Documentation/scsi/g_NCR5380.txt.
-
-	ncr53c400a=	[HW,SCSI]
-			See Documentation/scsi/g_NCR5380.txt.
-
-	ncr53c8xx=	[HW,SCSI]
-
-	osst=		[HW,SCSI] SCSI Tape Driver
-			Format: <buffer_size>,<write_threshold>
-			See also Documentation/scsi/st.txt.
-
-	scsi_debug_*=	[SCSI]
-			See drivers/scsi/scsi_debug.c.
-
-	scsi_mod.default_dev_flags=
-			[SCSI] SCSI default device flags
-			Format: <integer>
-
-	scsi_mod.dev_flags=
-			[SCSI] Black/white list entry for vendor and model
-			Format: <vendor>:<model>:<flags>
-			(flags are integer value)
-
-	scsi_mod.scsi_logging_level=
-			[SCSI] a bit mask of logging levels
-			See drivers/scsi/scsi_logging.h for bits.  Also
-			settable via sysctl at dev.scsi.logging_level
-			(/proc/sys/dev/scsi/logging_level).
-			There is also a nice 'scsi_logging_level' script in the
-			S390-tools package, available for download at
-			http://www-128.ibm.com/developerworks/linux/linux390/s390-tools-1.5.4.html
-
-	scsi_mod.scan=	[SCSI] sync (default) scans SCSI busses as they are
-			discovered.  async scans them in kernel threads,
-			allowing boot to proceed.  none ignores them, expecting
-			user space to do the scan.
-
-	sim710=		[SCSI,HW]
-			See header of drivers/scsi/sim710.c.
-
-	st=		[HW,SCSI] SCSI tape parameters (buffers, etc.)
-			See Documentation/scsi/st.txt.
-
-	wd33c93=	[HW,SCSI]
-			See header of drivers/scsi/wd33c93.c.
diff --git a/Documentation/scsi/scsi.rst b/Documentation/scsi/scsi.rst
new file mode 100644
index 0000000..276918e
--- /dev/null
+++ b/Documentation/scsi/scsi.rst
@@ -0,0 +1,47 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+============================
+SCSI subsystem documentation
+============================
+
+The Linux Documentation Project (LDP) maintains a document describing
+the SCSI subsystem in the Linux kernel (lk) 2.4 series. See:
+http://www.tldp.org/HOWTO/SCSI-2.4-HOWTO . The LDP has single
+and multiple page HTML renderings as well as postscript and pdf.
+It can also be found at:
+http://web.archive.org/web/%2E/http://www.torque.net/scsi/SCSI-2.4-HOWTO
+
+Notes on using modules in the SCSI subsystem
+============================================
+The scsi support in the linux kernel can be modularized in a number of
+different ways depending upon the needs of the end user.  To understand
+your options, we should first define a few terms.
+
+The scsi-core (also known as the "mid level") contains the core of scsi
+support.  Without it you can do nothing with any of the other scsi drivers.
+The scsi core support can be a module (scsi_mod.o), or it can be built into
+the kernel. If the core is a module, it must be the first scsi module
+loaded, and if you unload the modules, it will have to be the last one
+unloaded.  In practice the modprobe and rmmod commands (and "autoclean")
+will enforce the correct ordering of loading and unloading modules in
+the SCSI subsystem.
+
+The individual upper and lower level drivers can be loaded in any order
+once the scsi core is present in the kernel (either compiled in or loaded
+as a module).  The disk driver (sd_mod.o), cdrom driver (sr_mod.o),
+tape driver [1]_ (st.o) and scsi generics driver (sg.o) represent the upper
+level drivers to support the various assorted devices which can be
+controlled.  You can for example load the tape driver to use the tape drive,
+and then unload it once you have no further need for the driver (and release
+the associated memory).
+
+The lower level drivers are the ones that support the individual cards that
+are supported for the hardware platform that you are running under. Those
+individual cards are often called Host Bus Adapters (HBAs). For example the
+aic7xxx.o driver is used to control all recent SCSI controller cards from
+Adaptec. Almost all lower level drivers can be built either as modules or
+built into the kernel.
+
+.. [1] There is a variant of the st driver for controlling OnStream tape
+       devices. Its module name is osst.o .
+
diff --git a/Documentation/scsi/scsi.txt b/Documentation/scsi/scsi.txt
deleted file mode 100644
index 3d99d38..0000000
--- a/Documentation/scsi/scsi.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-SCSI subsystem documentation
-============================
-The Linux Documentation Project (LDP) maintains a document describing
-the SCSI subsystem in the Linux kernel (lk) 2.4 series. See:
-http://www.tldp.org/HOWTO/SCSI-2.4-HOWTO . The LDP has single
-and multiple page HTML renderings as well as postscript and pdf.
-It can also be found at:
-http://web.archive.org/web/*/http://www.torque.net/scsi/SCSI-2.4-HOWTO
-
-Notes on using modules in the SCSI subsystem
-============================================
-The scsi support in the linux kernel can be modularized in a number of 
-different ways depending upon the needs of the end user.  To understand
-your options, we should first define a few terms.
-
-The scsi-core (also known as the "mid level") contains the core of scsi 
-support.  Without it you can do nothing with any of the other scsi drivers.
-The scsi core support can be a module (scsi_mod.o), or it can be built into
-the kernel. If the core is a module, it must be the first scsi module 
-loaded, and if you unload the modules, it will have to be the last one 
-unloaded.  In practice the modprobe and rmmod commands (and "autoclean")
-will enforce the correct ordering of loading and unloading modules in
-the SCSI subsystem.
-
-The individual upper and lower level drivers can be loaded in any order 
-once the scsi core is present in the kernel (either compiled in or loaded
-as a module).  The disk driver (sd_mod.o), cdrom driver (sr_mod.o),
-tape driver ** (st.o) and scsi generics driver (sg.o) represent the upper 
-level drivers to support the various assorted devices which can be 
-controlled.  You can for example load the tape driver to use the tape drive, 
-and then unload it once you have no further need for the driver (and release
-the associated memory).
-
-The lower level drivers are the ones that support the individual cards that
-are supported for the hardware platform that you are running under. Those
-individual cards are often called Host Bus Adapters (HBAs). For example the
-aic7xxx.o driver is used to control all recent SCSI controller cards from 
-Adaptec. Almost all lower level drivers can be built either as modules or 
-built into the kernel.
-
-
-** There is a variant of the st driver for controlling OnStream tape
-   devices. Its module name is osst.o .
-
diff --git a/Documentation/scsi/scsi_eh.rst b/Documentation/scsi/scsi_eh.rst
new file mode 100644
index 0000000..7d78c24
--- /dev/null
+++ b/Documentation/scsi/scsi_eh.rst
@@ -0,0 +1,512 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=======
+SCSI EH
+=======
+
+This document describes SCSI midlayer error handling infrastructure.
+Please refer to Documentation/scsi/scsi_mid_low_api.rst for more
+information regarding SCSI midlayer.
+
+.. TABLE OF CONTENTS
+
+   [1] How SCSI commands travel through the midlayer and to EH
+       [1-1] struct scsi_cmnd
+       [1-2] How do scmd's get completed?
+   	[1-2-1] Completing a scmd w/ scsi_done
+   	[1-2-2] Completing a scmd w/ timeout
+       [1-3] How EH takes over
+   [2] How SCSI EH works
+       [2-1] EH through fine-grained callbacks
+   	[2-1-1] Overview
+   	[2-1-2] Flow of scmds through EH
+   	[2-1-3] Flow of control
+       [2-2] EH through transportt->eh_strategy_handler()
+   	[2-2-1] Pre transportt->eh_strategy_handler() SCSI midlayer conditions
+   	[2-2-2] Post transportt->eh_strategy_handler() SCSI midlayer conditions
+   	[2-2-3] Things to consider
+
+
+1. How SCSI commands travel through the midlayer and to EH
+==========================================================
+
+1.1 struct scsi_cmnd
+--------------------
+
+Each SCSI command is represented with struct scsi_cmnd (== scmd).  A
+scmd has two list_head's to link itself into lists.  The two are
+scmd->list and scmd->eh_entry.  The former is used for free list or
+per-device allocated scmd list and not of much interest to this EH
+discussion.  The latter is used for completion and EH lists and unless
+otherwise stated scmds are always linked using scmd->eh_entry in this
+discussion.
+
+
+1.2 How do scmd's get completed?
+--------------------------------
+
+Once LLDD gets hold of a scmd, either the LLDD will complete the
+command by calling scsi_done callback passed from midlayer when
+invoking hostt->queuecommand() or the block layer will time it out.
+
+
+1.2.1 Completing a scmd w/ scsi_done
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+For all non-EH commands, scsi_done() is the completion callback.  It
+just calls blk_complete_request() to delete the block layer timer and
+raise SCSI_SOFTIRQ
+
+SCSI_SOFTIRQ handler scsi_softirq calls scsi_decide_disposition() to
+determine what to do with the command.  scsi_decide_disposition()
+looks at the scmd->result value and sense data to determine what to do
+with the command.
+
+ - SUCCESS
+
+	scsi_finish_command() is invoked for the command.  The
+	function does some maintenance chores and then calls
+	scsi_io_completion() to finish the I/O.
+	scsi_io_completion() then notifies the block layer on
+	the completed request by calling blk_end_request and
+	friends or figures out what to do with the remainder
+	of the data in case of an error.
+
+ - NEEDS_RETRY
+
+ - ADD_TO_MLQUEUE
+
+	scmd is requeued to blk queue.
+
+ - otherwise
+
+	scsi_eh_scmd_add(scmd) is invoked for the command.  See
+	[1-3] for details of this function.
+
+
+1.2.2 Completing a scmd w/ timeout
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The timeout handler is scsi_times_out().  When a timeout occurs, this
+function
+
+ 1. invokes optional hostt->eh_timed_out() callback.  Return value can
+    be one of
+
+    - BLK_EH_RESET_TIMER
+	This indicates that more time is required to finish the
+	command.  Timer is restarted.  This action is counted as a
+	retry and only allowed scmd->allowed + 1(!) times.  Once the
+	limit is reached, action for BLK_EH_DONE is taken instead.
+
+    - BLK_EH_DONE
+        eh_timed_out() callback did not handle the command.
+	Step #2 is taken.
+
+ 2. scsi_abort_command() is invoked to schedule an asynchrous abort.
+    Asynchronous abort are not invoked for commands which the
+    SCSI_EH_ABORT_SCHEDULED flag is set (this indicates that the command
+    already had been aborted once, and this is a retry which failed),
+    or when the EH deadline is expired. In these case Step #3 is taken.
+
+ 3. scsi_eh_scmd_add(scmd, SCSI_EH_CANCEL_CMD) is invoked for the
+    command.  See [1-4] for more information.
+
+1.3 Asynchronous command aborts
+-------------------------------
+
+ After a timeout occurs a command abort is scheduled from
+ scsi_abort_command(). If the abort is successful the command
+ will either be retried (if the number of retries is not exhausted)
+ or terminated with DID_TIME_OUT.
+
+ Otherwise scsi_eh_scmd_add() is invoked for the command.
+ See [1-4] for more information.
+
+1.4 How EH takes over
+---------------------
+
+scmds enter EH via scsi_eh_scmd_add(), which does the following.
+
+ 1. Links scmd->eh_entry to shost->eh_cmd_q
+
+ 2. Sets SHOST_RECOVERY bit in shost->shost_state
+
+ 3. Increments shost->host_failed
+
+ 4. Wakes up SCSI EH thread if shost->host_busy == shost->host_failed
+
+As can be seen above, once any scmd is added to shost->eh_cmd_q,
+SHOST_RECOVERY shost_state bit is turned on.  This prevents any new
+scmd to be issued from blk queue to the host; eventually, all scmds on
+the host either complete normally, fail and get added to eh_cmd_q, or
+time out and get added to shost->eh_cmd_q.
+
+If all scmds either complete or fail, the number of in-flight scmds
+becomes equal to the number of failed scmds - i.e. shost->host_busy ==
+shost->host_failed.  This wakes up SCSI EH thread.  So, once woken up,
+SCSI EH thread can expect that all in-flight commands have failed and
+are linked on shost->eh_cmd_q.
+
+Note that this does not mean lower layers are quiescent.  If a LLDD
+completed a scmd with error status, the LLDD and lower layers are
+assumed to forget about the scmd at that point.  However, if a scmd
+has timed out, unless hostt->eh_timed_out() made lower layers forget
+about the scmd, which currently no LLDD does, the command is still
+active as long as lower layers are concerned and completion could
+occur at any time.  Of course, all such completions are ignored as the
+timer has already expired.
+
+We'll talk about how SCSI EH takes actions to abort - make LLDD
+forget about - timed out scmds later.
+
+
+2. How SCSI EH works
+====================
+
+LLDD's can implement SCSI EH actions in one of the following two
+ways.
+
+ - Fine-grained EH callbacks
+	LLDD can implement fine-grained EH callbacks and let SCSI
+	midlayer drive error handling and call appropriate callbacks.
+	This will be discussed further in [2-1].
+
+ - eh_strategy_handler() callback
+	This is one big callback which should perform whole error
+	handling.  As such, it should do all chores the SCSI midlayer
+	performs during recovery.  This will be discussed in [2-2].
+
+Once recovery is complete, SCSI EH resumes normal operation by
+calling scsi_restart_operations(), which
+
+ 1. Checks if door locking is needed and locks door.
+
+ 2. Clears SHOST_RECOVERY shost_state bit
+
+ 3. Wakes up waiters on shost->host_wait.  This occurs if someone
+    calls scsi_block_when_processing_errors() on the host.
+    (*QUESTION* why is it needed?  All operations will be blocked
+    anyway after it reaches blk queue.)
+
+ 4. Kicks queues in all devices on the host in the asses
+
+
+2.1 EH through fine-grained callbacks
+-------------------------------------
+
+2.1.1 Overview
+^^^^^^^^^^^^^^
+
+If eh_strategy_handler() is not present, SCSI midlayer takes charge
+of driving error handling.  EH's goals are two - make LLDD, host and
+device forget about timed out scmds and make them ready for new
+commands.  A scmd is said to be recovered if the scmd is forgotten by
+lower layers and lower layers are ready to process or fail the scmd
+again.
+
+To achieve these goals, EH performs recovery actions with increasing
+severity.  Some actions are performed by issuing SCSI commands and
+others are performed by invoking one of the following fine-grained
+hostt EH callbacks.  Callbacks may be omitted and omitted ones are
+considered to fail always.
+
+::
+
+    int (* eh_abort_handler)(struct scsi_cmnd *);
+    int (* eh_device_reset_handler)(struct scsi_cmnd *);
+    int (* eh_bus_reset_handler)(struct scsi_cmnd *);
+    int (* eh_host_reset_handler)(struct scsi_cmnd *);
+
+Higher-severity actions are taken only when lower-severity actions
+cannot recover some of failed scmds.  Also, note that failure of the
+highest-severity action means EH failure and results in offlining of
+all unrecovered devices.
+
+During recovery, the following rules are followed
+
+ - Recovery actions are performed on failed scmds on the to do list,
+   eh_work_q.  If a recovery action succeeds for a scmd, recovered
+   scmds are removed from eh_work_q.
+
+   Note that single recovery action on a scmd can recover multiple
+   scmds.  e.g. resetting a device recovers all failed scmds on the
+   device.
+
+ - Higher severity actions are taken iff eh_work_q is not empty after
+   lower severity actions are complete.
+
+ - EH reuses failed scmds to issue commands for recovery.  For
+   timed-out scmds, SCSI EH ensures that LLDD forgets about a scmd
+   before reusing it for EH commands.
+
+When a scmd is recovered, the scmd is moved from eh_work_q to EH
+local eh_done_q using scsi_eh_finish_cmd().  After all scmds are
+recovered (eh_work_q is empty), scsi_eh_flush_done_q() is invoked to
+either retry or error-finish (notify upper layer of failure) recovered
+scmds.
+
+scmds are retried iff its sdev is still online (not offlined during
+EH), REQ_FAILFAST is not set and ++scmd->retries is less than
+scmd->allowed.
+
+
+2.1.2 Flow of scmds through EH
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+ 1. Error completion / time out
+
+    :ACTION: scsi_eh_scmd_add() is invoked for scmd
+
+	- add scmd to shost->eh_cmd_q
+	- set SHOST_RECOVERY
+	- shost->host_failed++
+
+    :LOCKING: shost->host_lock
+
+ 2. EH starts
+
+    :ACTION: move all scmds to EH's local eh_work_q.  shost->eh_cmd_q
+	     is cleared.
+
+    :LOCKING: shost->host_lock (not strictly necessary, just for
+             consistency)
+
+ 3. scmd recovered
+
+    :ACTION: scsi_eh_finish_cmd() is invoked to EH-finish scmd
+
+	- scsi_setup_cmd_retry()
+	- move from local eh_work_q to local eh_done_q
+
+    :LOCKING: none
+
+    :CONCURRENCY: at most one thread per separate eh_work_q to
+		  keep queue manipulation lockless
+
+ 4. EH completes
+
+    :ACTION: scsi_eh_flush_done_q() retries scmds or notifies upper
+	     layer of failure. May be called concurrently but must have
+	     a no more than one thread per separate eh_work_q to
+	     manipulate the queue locklessly
+
+	     - scmd is removed from eh_done_q and scmd->eh_entry is cleared
+	     - if retry is necessary, scmd is requeued using
+	       scsi_queue_insert()
+	     - otherwise, scsi_finish_command() is invoked for scmd
+	     - zero shost->host_failed
+
+    :LOCKING: queue or finish function performs appropriate locking
+
+
+2.1.3 Flow of control
+^^^^^^^^^^^^^^^^^^^^^^
+
+ EH through fine-grained callbacks start from scsi_unjam_host().
+
+``scsi_unjam_host``
+
+    1. Lock shost->host_lock, splice_init shost->eh_cmd_q into local
+       eh_work_q and unlock host_lock.  Note that shost->eh_cmd_q is
+       cleared by this action.
+
+    2. Invoke scsi_eh_get_sense.
+
+    ``scsi_eh_get_sense``
+
+	This action is taken for each error-completed
+	(!SCSI_EH_CANCEL_CMD) commands without valid sense data.  Most
+	SCSI transports/LLDDs automatically acquire sense data on
+	command failures (autosense).  Autosense is recommended for
+	performance reasons and as sense information could get out of
+	sync between occurrence of CHECK CONDITION and this action.
+
+	Note that if autosense is not supported, scmd->sense_buffer
+	contains invalid sense data when error-completing the scmd
+	with scsi_done().  scsi_decide_disposition() always returns
+	FAILED in such cases thus invoking SCSI EH.  When the scmd
+	reaches here, sense data is acquired and
+	scsi_decide_disposition() is called again.
+
+	1. Invoke scsi_request_sense() which issues REQUEST_SENSE
+           command.  If fails, no action.  Note that taking no action
+           causes higher-severity recovery to be taken for the scmd.
+
+	2. Invoke scsi_decide_disposition() on the scmd
+
+	   - SUCCESS
+		scmd->retries is set to scmd->allowed preventing
+		scsi_eh_flush_done_q() from retrying the scmd and
+		scsi_eh_finish_cmd() is invoked.
+
+	   - NEEDS_RETRY
+		scsi_eh_finish_cmd() invoked
+
+	   - otherwise
+		No action.
+
+    3. If !list_empty(&eh_work_q), invoke scsi_eh_abort_cmds().
+
+    ``scsi_eh_abort_cmds``
+
+	This action is taken for each timed out command when
+	no_async_abort is enabled in the host template.
+	hostt->eh_abort_handler() is invoked for each scmd.  The
+	handler returns SUCCESS if it has succeeded to make LLDD and
+	all related hardware forget about the scmd.
+
+	If a timedout scmd is successfully aborted and the sdev is
+	either offline or ready, scsi_eh_finish_cmd() is invoked for
+	the scmd.  Otherwise, the scmd is left in eh_work_q for
+	higher-severity actions.
+
+	Note that both offline and ready status mean that the sdev is
+	ready to process new scmds, where processing also implies
+	immediate failing; thus, if a sdev is in one of the two
+	states, no further recovery action is needed.
+
+	Device readiness is tested using scsi_eh_tur() which issues
+	TEST_UNIT_READY command.  Note that the scmd must have been
+	aborted successfully before reusing it for TEST_UNIT_READY.
+
+    4. If !list_empty(&eh_work_q), invoke scsi_eh_ready_devs()
+
+    ``scsi_eh_ready_devs``
+
+	This function takes four increasingly more severe measures to
+	make failed sdevs ready for new commands.
+
+	1. Invoke scsi_eh_stu()
+
+	``scsi_eh_stu``
+
+	    For each sdev which has failed scmds with valid sense data
+	    of which scsi_check_sense()'s verdict is FAILED,
+	    START_STOP_UNIT command is issued w/ start=1.  Note that
+	    as we explicitly choose error-completed scmds, it is known
+	    that lower layers have forgotten about the scmd and we can
+	    reuse it for STU.
+
+	    If STU succeeds and the sdev is either offline or ready,
+	    all failed scmds on the sdev are EH-finished with
+	    scsi_eh_finish_cmd().
+
+	    *NOTE* If hostt->eh_abort_handler() isn't implemented or
+	    failed, we may still have timed out scmds at this point
+	    and STU doesn't make lower layers forget about those
+	    scmds.  Yet, this function EH-finish all scmds on the sdev
+	    if STU succeeds leaving lower layers in an inconsistent
+	    state.  It seems that STU action should be taken only when
+	    a sdev has no timed out scmd.
+
+	2. If !list_empty(&eh_work_q), invoke scsi_eh_bus_device_reset().
+
+	``scsi_eh_bus_device_reset``
+
+	    This action is very similar to scsi_eh_stu() except that,
+	    instead of issuing STU, hostt->eh_device_reset_handler()
+	    is used.  Also, as we're not issuing SCSI commands and
+	    resetting clears all scmds on the sdev, there is no need
+	    to choose error-completed scmds.
+
+	3. If !list_empty(&eh_work_q), invoke scsi_eh_bus_reset()
+
+	``scsi_eh_bus_reset``
+
+	    hostt->eh_bus_reset_handler() is invoked for each channel
+	    with failed scmds.  If bus reset succeeds, all failed
+	    scmds on all ready or offline sdevs on the channel are
+	    EH-finished.
+
+	4. If !list_empty(&eh_work_q), invoke scsi_eh_host_reset()
+
+	``scsi_eh_host_reset``
+
+	    This is the last resort.  hostt->eh_host_reset_handler()
+	    is invoked.  If host reset succeeds, all failed scmds on
+	    all ready or offline sdevs on the host are EH-finished.
+
+	5. If !list_empty(&eh_work_q), invoke scsi_eh_offline_sdevs()
+
+	``scsi_eh_offline_sdevs``
+
+	    Take all sdevs which still have unrecovered scmds offline
+	    and EH-finish the scmds.
+
+    5. Invoke scsi_eh_flush_done_q().
+
+	``scsi_eh_flush_done_q``
+
+	    At this point all scmds are recovered (or given up) and
+	    put on eh_done_q by scsi_eh_finish_cmd().  This function
+	    flushes eh_done_q by either retrying or notifying upper
+	    layer of failure of the scmds.
+
+
+2.2 EH through transportt->eh_strategy_handler()
+------------------------------------------------
+
+transportt->eh_strategy_handler() is invoked in the place of
+scsi_unjam_host() and it is responsible for whole recovery process.
+On completion, the handler should have made lower layers forget about
+all failed scmds and either ready for new commands or offline.  Also,
+it should perform SCSI EH maintenance chores to maintain integrity of
+SCSI midlayer.  IOW, of the steps described in [2-1-2], all steps
+except for #1 must be implemented by eh_strategy_handler().
+
+
+2.2.1 Pre transportt->eh_strategy_handler() SCSI midlayer conditions
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+ The following conditions are true on entry to the handler.
+
+ - Each failed scmd's eh_flags field is set appropriately.
+
+ - Each failed scmd is linked on scmd->eh_cmd_q by scmd->eh_entry.
+
+ - SHOST_RECOVERY is set.
+
+ - shost->host_failed == shost->host_busy
+
+
+2.2.2 Post transportt->eh_strategy_handler() SCSI midlayer conditions
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+ The following conditions must be true on exit from the handler.
+
+ - shost->host_failed is zero.
+
+ - Each scmd is in such a state that scsi_setup_cmd_retry() on the
+   scmd doesn't make any difference.
+
+ - shost->eh_cmd_q is cleared.
+
+ - Each scmd->eh_entry is cleared.
+
+ - Either scsi_queue_insert() or scsi_finish_command() is called on
+   each scmd.  Note that the handler is free to use scmd->retries and
+   ->allowed to limit the number of retries.
+
+
+2.2.3 Things to consider
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+ - Know that timed out scmds are still active on lower layers.  Make
+   lower layers forget about them before doing anything else with
+   those scmds.
+
+ - For consistency, when accessing/modifying shost data structure,
+   grab shost->host_lock.
+
+ - On completion, each failed sdev must have forgotten about all
+   active scmds.
+
+ - On completion, each failed sdev must be ready for new commands or
+   offline.
+
+
+Tejun Heo
+htejun@gmail.com
+
+11th September 2005
diff --git a/Documentation/scsi/scsi_eh.txt b/Documentation/scsi/scsi_eh.txt
deleted file mode 100644
index 1b74369..0000000
--- a/Documentation/scsi/scsi_eh.txt
+++ /dev/null
@@ -1,475 +0,0 @@
-
-SCSI EH
-======================================
-
- This document describes SCSI midlayer error handling infrastructure.
-Please refer to Documentation/scsi/scsi_mid_low_api.txt for more
-information regarding SCSI midlayer.
-
-TABLE OF CONTENTS
-
-[1] How SCSI commands travel through the midlayer and to EH
-    [1-1] struct scsi_cmnd
-    [1-2] How do scmd's get completed?
-	[1-2-1] Completing a scmd w/ scsi_done
-	[1-2-2] Completing a scmd w/ timeout
-    [1-3] How EH takes over
-[2] How SCSI EH works
-    [2-1] EH through fine-grained callbacks
-	[2-1-1] Overview
-	[2-1-2] Flow of scmds through EH
-	[2-1-3] Flow of control
-    [2-2] EH through transportt->eh_strategy_handler()
-	[2-2-1] Pre transportt->eh_strategy_handler() SCSI midlayer conditions
-	[2-2-2] Post transportt->eh_strategy_handler() SCSI midlayer conditions
-	[2-2-3] Things to consider
-
-
-[1] How SCSI commands travel through the midlayer and to EH
-
-[1-1] struct scsi_cmnd
-
- Each SCSI command is represented with struct scsi_cmnd (== scmd).  A
-scmd has two list_head's to link itself into lists.  The two are
-scmd->list and scmd->eh_entry.  The former is used for free list or
-per-device allocated scmd list and not of much interest to this EH
-discussion.  The latter is used for completion and EH lists and unless
-otherwise stated scmds are always linked using scmd->eh_entry in this
-discussion.
-
-
-[1-2] How do scmd's get completed?
-
- Once LLDD gets hold of a scmd, either the LLDD will complete the
-command by calling scsi_done callback passed from midlayer when
-invoking hostt->queuecommand() or the block layer will time it out.
-
-
-[1-2-1] Completing a scmd w/ scsi_done
-
- For all non-EH commands, scsi_done() is the completion callback.  It
-just calls blk_complete_request() to delete the block layer timer and
-raise SCSI_SOFTIRQ
-
- SCSI_SOFTIRQ handler scsi_softirq calls scsi_decide_disposition() to
-determine what to do with the command.  scsi_decide_disposition()
-looks at the scmd->result value and sense data to determine what to do
-with the command.
-
- - SUCCESS
-	scsi_finish_command() is invoked for the command.  The
-	function does some maintenance chores and then calls
-	scsi_io_completion() to finish the I/O.
-	scsi_io_completion() then notifies the block layer on
-	the completed request by calling blk_end_request and
-	friends or figures out what to do with the remainder
-	of the data in case of an error.
-
- - NEEDS_RETRY
- - ADD_TO_MLQUEUE
-	scmd is requeued to blk queue.
-
- - otherwise
-	scsi_eh_scmd_add(scmd) is invoked for the command.  See
-	[1-3] for details of this function.
-
-
-[1-2-2] Completing a scmd w/ timeout
-
- The timeout handler is scsi_times_out().  When a timeout occurs, this
-function
-
- 1. invokes optional hostt->eh_timed_out() callback.  Return value can
-    be one of
-
-    - BLK_EH_RESET_TIMER
-	This indicates that more time is required to finish the
-	command.  Timer is restarted.  This action is counted as a
-	retry and only allowed scmd->allowed + 1(!) times.  Once the
-	limit is reached, action for BLK_EH_DONE is taken instead.
-
-    - BLK_EH_DONE
-        eh_timed_out() callback did not handle the command.
-	Step #2 is taken.
-
- 2. scsi_abort_command() is invoked to schedule an asynchrous abort.
-    Asynchronous abort are not invoked for commands which the
-    SCSI_EH_ABORT_SCHEDULED flag is set (this indicates that the command
-    already had been aborted once, and this is a retry which failed),
-    or when the EH deadline is expired. In these case Step #3 is taken.
-
- 3. scsi_eh_scmd_add(scmd, SCSI_EH_CANCEL_CMD) is invoked for the
-    command.  See [1-4] for more information.
-
-[1-3] Asynchronous command aborts
-
- After a timeout occurs a command abort is scheduled from
- scsi_abort_command(). If the abort is successful the command
- will either be retried (if the number of retries is not exhausted)
- or terminated with DID_TIME_OUT.
- Otherwise scsi_eh_scmd_add() is invoked for the command.
- See [1-4] for more information.
-
-[1-4] How EH takes over
-
- scmds enter EH via scsi_eh_scmd_add(), which does the following.
-
- 1. Links scmd->eh_entry to shost->eh_cmd_q
-
- 2. Sets SHOST_RECOVERY bit in shost->shost_state
-
- 3. Increments shost->host_failed
-
- 4. Wakes up SCSI EH thread if shost->host_busy == shost->host_failed
-
- As can be seen above, once any scmd is added to shost->eh_cmd_q,
-SHOST_RECOVERY shost_state bit is turned on.  This prevents any new
-scmd to be issued from blk queue to the host; eventually, all scmds on
-the host either complete normally, fail and get added to eh_cmd_q, or
-time out and get added to shost->eh_cmd_q.
-
- If all scmds either complete or fail, the number of in-flight scmds
-becomes equal to the number of failed scmds - i.e. shost->host_busy ==
-shost->host_failed.  This wakes up SCSI EH thread.  So, once woken up,
-SCSI EH thread can expect that all in-flight commands have failed and
-are linked on shost->eh_cmd_q.
-
- Note that this does not mean lower layers are quiescent.  If a LLDD
-completed a scmd with error status, the LLDD and lower layers are
-assumed to forget about the scmd at that point.  However, if a scmd
-has timed out, unless hostt->eh_timed_out() made lower layers forget
-about the scmd, which currently no LLDD does, the command is still
-active as long as lower layers are concerned and completion could
-occur at any time.  Of course, all such completions are ignored as the
-timer has already expired.
-
- We'll talk about how SCSI EH takes actions to abort - make LLDD
-forget about - timed out scmds later.
-
-
-[2] How SCSI EH works
-
- LLDD's can implement SCSI EH actions in one of the following two
-ways.
-
- - Fine-grained EH callbacks
-	LLDD can implement fine-grained EH callbacks and let SCSI
-	midlayer drive error handling and call appropriate callbacks.
-	This will be discussed further in [2-1].
-
- - eh_strategy_handler() callback
-	This is one big callback which should perform whole error
-	handling.  As such, it should do all chores the SCSI midlayer
-	performs during recovery.  This will be discussed in [2-2].
-
- Once recovery is complete, SCSI EH resumes normal operation by
-calling scsi_restart_operations(), which
-
- 1. Checks if door locking is needed and locks door.
-
- 2. Clears SHOST_RECOVERY shost_state bit
-
- 3. Wakes up waiters on shost->host_wait.  This occurs if someone
-    calls scsi_block_when_processing_errors() on the host.
-    (*QUESTION* why is it needed?  All operations will be blocked
-    anyway after it reaches blk queue.)
-
- 4. Kicks queues in all devices on the host in the asses
-
-
-[2-1] EH through fine-grained callbacks
-
-[2-1-1] Overview
-
- If eh_strategy_handler() is not present, SCSI midlayer takes charge
-of driving error handling.  EH's goals are two - make LLDD, host and
-device forget about timed out scmds and make them ready for new
-commands.  A scmd is said to be recovered if the scmd is forgotten by
-lower layers and lower layers are ready to process or fail the scmd
-again.
-
- To achieve these goals, EH performs recovery actions with increasing
-severity.  Some actions are performed by issuing SCSI commands and
-others are performed by invoking one of the following fine-grained
-hostt EH callbacks.  Callbacks may be omitted and omitted ones are
-considered to fail always.
-
-int (* eh_abort_handler)(struct scsi_cmnd *);
-int (* eh_device_reset_handler)(struct scsi_cmnd *);
-int (* eh_bus_reset_handler)(struct scsi_cmnd *);
-int (* eh_host_reset_handler)(struct scsi_cmnd *);
-
- Higher-severity actions are taken only when lower-severity actions
-cannot recover some of failed scmds.  Also, note that failure of the
-highest-severity action means EH failure and results in offlining of
-all unrecovered devices.
-
- During recovery, the following rules are followed
-
- - Recovery actions are performed on failed scmds on the to do list,
-   eh_work_q.  If a recovery action succeeds for a scmd, recovered
-   scmds are removed from eh_work_q.
-
-   Note that single recovery action on a scmd can recover multiple
-   scmds.  e.g. resetting a device recovers all failed scmds on the
-   device.
-
- - Higher severity actions are taken iff eh_work_q is not empty after
-   lower severity actions are complete.
-
- - EH reuses failed scmds to issue commands for recovery.  For
-   timed-out scmds, SCSI EH ensures that LLDD forgets about a scmd
-   before reusing it for EH commands.
-
- When a scmd is recovered, the scmd is moved from eh_work_q to EH
-local eh_done_q using scsi_eh_finish_cmd().  After all scmds are
-recovered (eh_work_q is empty), scsi_eh_flush_done_q() is invoked to
-either retry or error-finish (notify upper layer of failure) recovered
-scmds.
-
- scmds are retried iff its sdev is still online (not offlined during
-EH), REQ_FAILFAST is not set and ++scmd->retries is less than
-scmd->allowed.
-
-
-[2-1-2] Flow of scmds through EH
-
- 1. Error completion / time out
-    ACTION: scsi_eh_scmd_add() is invoked for scmd
-	- add scmd to shost->eh_cmd_q
-	- set SHOST_RECOVERY
-	- shost->host_failed++
-    LOCKING: shost->host_lock
-
- 2. EH starts
-    ACTION: move all scmds to EH's local eh_work_q.  shost->eh_cmd_q
-	    is cleared.
-    LOCKING: shost->host_lock (not strictly necessary, just for
-             consistency)
-
- 3. scmd recovered
-    ACTION: scsi_eh_finish_cmd() is invoked to EH-finish scmd
-	- scsi_setup_cmd_retry()
-	- move from local eh_work_q to local eh_done_q
-    LOCKING: none
-    CONCURRENCY: at most one thread per separate eh_work_q to
-		 keep queue manipulation lockless
-
- 4. EH completes
-    ACTION: scsi_eh_flush_done_q() retries scmds or notifies upper
-	    layer of failure. May be called concurrently but must have
-	    a no more than one thread per separate eh_work_q to
-	    manipulate the queue locklessly
-	- scmd is removed from eh_done_q and scmd->eh_entry is cleared
-	- if retry is necessary, scmd is requeued using
-          scsi_queue_insert()
-	- otherwise, scsi_finish_command() is invoked for scmd
-	- zero shost->host_failed
-    LOCKING: queue or finish function performs appropriate locking
-
-
-[2-1-3] Flow of control
-
- EH through fine-grained callbacks start from scsi_unjam_host().
-
-<<scsi_unjam_host>>
-
-    1. Lock shost->host_lock, splice_init shost->eh_cmd_q into local
-       eh_work_q and unlock host_lock.  Note that shost->eh_cmd_q is
-       cleared by this action.
-
-    2. Invoke scsi_eh_get_sense.
-
-    <<scsi_eh_get_sense>>
-
-	This action is taken for each error-completed
-	(!SCSI_EH_CANCEL_CMD) commands without valid sense data.  Most
-	SCSI transports/LLDDs automatically acquire sense data on
-	command failures (autosense).  Autosense is recommended for
-	performance reasons and as sense information could get out of
-	sync between occurrence of CHECK CONDITION and this action.
-
-	Note that if autosense is not supported, scmd->sense_buffer
-	contains invalid sense data when error-completing the scmd
-	with scsi_done().  scsi_decide_disposition() always returns
-	FAILED in such cases thus invoking SCSI EH.  When the scmd
-	reaches here, sense data is acquired and
-	scsi_decide_disposition() is called again.
-
-	1. Invoke scsi_request_sense() which issues REQUEST_SENSE
-           command.  If fails, no action.  Note that taking no action
-           causes higher-severity recovery to be taken for the scmd.
-
-	2. Invoke scsi_decide_disposition() on the scmd
-
-	   - SUCCESS
-		scmd->retries is set to scmd->allowed preventing
-		scsi_eh_flush_done_q() from retrying the scmd and
-		scsi_eh_finish_cmd() is invoked.
-
-	   - NEEDS_RETRY
-		scsi_eh_finish_cmd() invoked
-
-	   - otherwise
-		No action.
-
-    3. If !list_empty(&eh_work_q), invoke scsi_eh_abort_cmds().
-
-    <<scsi_eh_abort_cmds>>
-
-	This action is taken for each timed out command when
-	no_async_abort is enabled in the host template.
-	hostt->eh_abort_handler() is invoked for each scmd.  The
-	handler returns SUCCESS if it has succeeded to make LLDD and
-	all related hardware forget about the scmd.
-
-	If a timedout scmd is successfully aborted and the sdev is
-	either offline or ready, scsi_eh_finish_cmd() is invoked for
-	the scmd.  Otherwise, the scmd is left in eh_work_q for
-	higher-severity actions.
-
-	Note that both offline and ready status mean that the sdev is
-	ready to process new scmds, where processing also implies
-	immediate failing; thus, if a sdev is in one of the two
-	states, no further recovery action is needed.
-
-	Device readiness is tested using scsi_eh_tur() which issues
-	TEST_UNIT_READY command.  Note that the scmd must have been
-	aborted successfully before reusing it for TEST_UNIT_READY.
-
-    4. If !list_empty(&eh_work_q), invoke scsi_eh_ready_devs()
-
-    <<scsi_eh_ready_devs>>
-
-	This function takes four increasingly more severe measures to
-	make failed sdevs ready for new commands.
-
-	1. Invoke scsi_eh_stu()
-
-	<<scsi_eh_stu>>
-
-	    For each sdev which has failed scmds with valid sense data
-	    of which scsi_check_sense()'s verdict is FAILED,
-	    START_STOP_UNIT command is issued w/ start=1.  Note that
-	    as we explicitly choose error-completed scmds, it is known
-	    that lower layers have forgotten about the scmd and we can
-	    reuse it for STU.
-
-	    If STU succeeds and the sdev is either offline or ready,
-	    all failed scmds on the sdev are EH-finished with
-	    scsi_eh_finish_cmd().
-
-	    *NOTE* If hostt->eh_abort_handler() isn't implemented or
-	    failed, we may still have timed out scmds at this point
-	    and STU doesn't make lower layers forget about those
-	    scmds.  Yet, this function EH-finish all scmds on the sdev
-	    if STU succeeds leaving lower layers in an inconsistent
-	    state.  It seems that STU action should be taken only when
-	    a sdev has no timed out scmd.
-
-	2. If !list_empty(&eh_work_q), invoke scsi_eh_bus_device_reset().
-
-	<<scsi_eh_bus_device_reset>>
-
-	    This action is very similar to scsi_eh_stu() except that,
-	    instead of issuing STU, hostt->eh_device_reset_handler()
-	    is used.  Also, as we're not issuing SCSI commands and
-	    resetting clears all scmds on the sdev, there is no need
-	    to choose error-completed scmds.
-
-	3. If !list_empty(&eh_work_q), invoke scsi_eh_bus_reset()
-
-	<<scsi_eh_bus_reset>>
-
-	    hostt->eh_bus_reset_handler() is invoked for each channel
-	    with failed scmds.  If bus reset succeeds, all failed
-	    scmds on all ready or offline sdevs on the channel are
-	    EH-finished.
-
-	4. If !list_empty(&eh_work_q), invoke scsi_eh_host_reset()
-
-	<<scsi_eh_host_reset>>
-
-	    This is the last resort.  hostt->eh_host_reset_handler()
-	    is invoked.  If host reset succeeds, all failed scmds on
-	    all ready or offline sdevs on the host are EH-finished.
-
-	5. If !list_empty(&eh_work_q), invoke scsi_eh_offline_sdevs()
-
-	<<scsi_eh_offline_sdevs>>
-
-	    Take all sdevs which still have unrecovered scmds offline
-	    and EH-finish the scmds.
-
-    5. Invoke scsi_eh_flush_done_q().
-
-	<<scsi_eh_flush_done_q>>
-
-	    At this point all scmds are recovered (or given up) and
-	    put on eh_done_q by scsi_eh_finish_cmd().  This function
-	    flushes eh_done_q by either retrying or notifying upper
-	    layer of failure of the scmds.
-
-
-[2-2] EH through transportt->eh_strategy_handler()
-
- transportt->eh_strategy_handler() is invoked in the place of
-scsi_unjam_host() and it is responsible for whole recovery process.
-On completion, the handler should have made lower layers forget about
-all failed scmds and either ready for new commands or offline.  Also,
-it should perform SCSI EH maintenance chores to maintain integrity of
-SCSI midlayer.  IOW, of the steps described in [2-1-2], all steps
-except for #1 must be implemented by eh_strategy_handler().
-
-
-[2-2-1] Pre transportt->eh_strategy_handler() SCSI midlayer conditions
-
- The following conditions are true on entry to the handler.
-
- - Each failed scmd's eh_flags field is set appropriately.
-
- - Each failed scmd is linked on scmd->eh_cmd_q by scmd->eh_entry.
-
- - SHOST_RECOVERY is set.
-
- - shost->host_failed == shost->host_busy
-
-
-[2-2-2] Post transportt->eh_strategy_handler() SCSI midlayer conditions
-
- The following conditions must be true on exit from the handler.
-
- - shost->host_failed is zero.
-
- - Each scmd is in such a state that scsi_setup_cmd_retry() on the
-   scmd doesn't make any difference.
-
- - shost->eh_cmd_q is cleared.
-
- - Each scmd->eh_entry is cleared.
-
- - Either scsi_queue_insert() or scsi_finish_command() is called on
-   each scmd.  Note that the handler is free to use scmd->retries and
-   ->allowed to limit the number of retries.
-
-
-[2-2-3] Things to consider
-
- - Know that timed out scmds are still active on lower layers.  Make
-   lower layers forget about them before doing anything else with
-   those scmds.
-
- - For consistency, when accessing/modifying shost data structure,
-   grab shost->host_lock.
-
- - On completion, each failed sdev must have forgotten about all
-   active scmds.
-
- - On completion, each failed sdev must be ready for new commands or
-   offline.
-
-
---
-Tejun Heo
-htejun@gmail.com
-11th September 2005
diff --git a/Documentation/scsi/scsi_fc_transport.rst b/Documentation/scsi/scsi_fc_transport.rst
new file mode 100644
index 0000000..176c186
--- /dev/null
+++ b/Documentation/scsi/scsi_fc_transport.rst
@@ -0,0 +1,560 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+================
+SCSI FC Tansport
+================
+
+Date:  11/18/2008
+
+Kernel Revisions for features::
+
+  rports : <<TBS>>
+  vports : 2.6.22
+  bsg support : 2.6.30 (?TBD?)
+
+
+Introduction
+============
+This file documents the features and components of the SCSI FC Transport.
+It also provides documents the API between the transport and FC LLDDs.
+
+The FC transport can be found at::
+
+  drivers/scsi/scsi_transport_fc.c
+  include/scsi/scsi_transport_fc.h
+  include/scsi/scsi_netlink_fc.h
+  include/scsi/scsi_bsg_fc.h
+
+This file is found at Documentation/scsi/scsi_fc_transport.rst
+
+
+FC Remote Ports (rports)
+========================
+<< To Be Supplied >>
+
+
+FC Virtual Ports (vports)
+=========================
+
+Overview
+--------
+
+  New FC standards have defined mechanisms which allows for a single physical
+  port to appear on as multiple communication ports. Using the N_Port Id
+  Virtualization (NPIV) mechanism, a point-to-point connection to a Fabric
+  can be assigned more than 1 N_Port_ID.  Each N_Port_ID appears as a
+  separate port to other endpoints on the fabric, even though it shares one
+  physical link to the switch for communication. Each N_Port_ID can have a
+  unique view of the fabric based on fabric zoning and array lun-masking
+  (just like a normal non-NPIV adapter).  Using the Virtual Fabric (VF)
+  mechanism, adding a fabric header to each frame allows the port to
+  interact with the Fabric Port to join multiple fabrics. The port will
+  obtain an N_Port_ID on each fabric it joins. Each fabric will have its
+  own unique view of endpoints and configuration parameters.  NPIV may be
+  used together with VF so that the port can obtain multiple N_Port_IDs
+  on each virtual fabric.
+
+  The FC transport is now recognizing a new object - a vport.  A vport is
+  an entity that has a world-wide unique World Wide Port Name (wwpn) and
+  World Wide Node Name (wwnn). The transport also allows for the FC4's to
+  be specified for the vport, with FCP_Initiator being the primary role
+  expected. Once instantiated by one of the above methods, it will have a
+  distinct N_Port_ID and view of fabric endpoints and storage entities.
+  The fc_host associated with the physical adapter will export the ability
+  to create vports. The transport will create the vport object within the
+  Linux device tree, and instruct the fc_host's driver to instantiate the
+  virtual port. Typically, the driver will create a new scsi_host instance
+  on the vport, resulting in a unique <H,C,T,L> namespace for the vport.
+  Thus, whether a FC port is based on a physical port or on a virtual port,
+  each will appear as a unique scsi_host with its own target and lun space.
+
+  .. Note::
+    At this time, the transport is written to create only NPIV-based
+    vports. However, consideration was given to VF-based vports and it
+    should be a minor change to add support if needed.  The remaining
+    discussion will concentrate on NPIV.
+
+  .. Note::
+    World Wide Name assignment (and uniqueness guarantees) are left
+    up to an administrative entity controlling the vport. For example,
+    if vports are to be associated with virtual machines, a XEN mgmt
+    utility would be responsible for creating wwpn/wwnn's for the vport,
+    using its own naming authority and OUI. (Note: it already does this
+    for virtual MAC addresses).
+
+
+Device Trees and Vport Objects:
+-------------------------------
+
+  Today, the device tree typically contains the scsi_host object,
+  with rports and scsi target objects underneath it. Currently the FC
+  transport creates the vport object and places it under the scsi_host
+  object corresponding to the physical adapter.  The LLDD will allocate
+  a new scsi_host for the vport and link its object under the vport.
+  The remainder of the tree under the vports scsi_host is the same
+  as the non-NPIV case. The transport is written currently to easily
+  allow the parent of the vport to be something other than the scsi_host.
+  This could be used in the future to link the object onto a vm-specific
+  device tree. If the vport's parent is not the physical port's scsi_host,
+  a symbolic link to the vport object will be placed in the physical
+  port's scsi_host.
+
+  Here's what to expect in the device tree :
+
+   The typical Physical Port's Scsi_Host::
+
+     /sys/devices/.../host17/
+
+   and it has the typical descendant tree::
+
+     /sys/devices/.../host17/rport-17:0-0/target17:0:0/17:0:0:0:
+
+   and then the vport is created on the Physical Port::
+
+     /sys/devices/.../host17/vport-17:0-0
+
+   and the vport's Scsi_Host is then created::
+
+     /sys/devices/.../host17/vport-17:0-0/host18
+
+   and then the rest of the tree progresses, such as::
+
+     /sys/devices/.../host17/vport-17:0-0/host18/rport-18:0-0/target18:0:0/18:0:0:0:
+
+  Here's what to expect in the sysfs tree::
+
+   scsi_hosts:
+     /sys/class/scsi_host/host17                physical port's scsi_host
+     /sys/class/scsi_host/host18                vport's scsi_host
+   fc_hosts:
+     /sys/class/fc_host/host17                  physical port's fc_host
+     /sys/class/fc_host/host18                  vport's fc_host
+   fc_vports:
+     /sys/class/fc_vports/vport-17:0-0          the vport's fc_vport
+   fc_rports:
+     /sys/class/fc_remote_ports/rport-17:0-0    rport on the physical port
+     /sys/class/fc_remote_ports/rport-18:0-0    rport on the vport
+
+
+Vport Attributes
+----------------
+
+  The new fc_vport class object has the following attributes
+
+     node_name:                                                 Read_Only
+       The WWNN of the vport
+
+     port_name:                                                 Read_Only
+       The WWPN of the vport
+
+     roles:                                                     Read_Only
+       Indicates the FC4 roles enabled on the vport.
+
+     symbolic_name:                                             Read_Write
+       A string, appended to the driver's symbolic port name string, which
+       is registered with the switch to identify the vport. For example,
+       a hypervisor could set this string to "Xen Domain 2 VM 5 Vport 2",
+       and this set of identifiers can be seen on switch management screens
+       to identify the port.
+
+     vport_delete:                                              Write_Only
+       When written with a "1", will tear down the vport.
+
+     vport_disable:                                             Write_Only
+       When written with a "1", will transition the vport to a disabled.
+       state.  The vport will still be instantiated with the Linux kernel,
+       but it will not be active on the FC link.
+       When written with a "0", will enable the vport.
+
+     vport_last_state:                                          Read_Only
+       Indicates the previous state of the vport.  See the section below on
+       "Vport States".
+
+     vport_state:                                               Read_Only
+       Indicates the state of the vport.  See the section below on
+       "Vport States".
+
+     vport_type:                                                Read_Only
+       Reflects the FC mechanism used to create the virtual port.
+       Only NPIV is supported currently.
+
+
+  For the fc_host class object, the following attributes are added for vports:
+
+     max_npiv_vports:                                           Read_Only
+       Indicates the maximum number of NPIV-based vports that the
+       driver/adapter can support on the fc_host.
+
+     npiv_vports_inuse:                                         Read_Only
+       Indicates how many NPIV-based vports have been instantiated on the
+       fc_host.
+
+     vport_create:                                              Write_Only
+       A "simple" create interface to instantiate a vport on an fc_host.
+       A "<WWPN>:<WWNN>" string is written to the attribute. The transport
+       then instantiates the vport object and calls the LLDD to create the
+       vport with the role of FCP_Initiator.  Each WWN is specified as 16
+       hex characters and may *not* contain any prefixes (e.g. 0x, x, etc).
+
+     vport_delete:                                              Write_Only
+        A "simple" delete interface to teardown a vport. A "<WWPN>:<WWNN>"
+        string is written to the attribute. The transport will locate the
+        vport on the fc_host with the same WWNs and tear it down.  Each WWN
+        is specified as 16 hex characters and may *not* contain any prefixes
+        (e.g. 0x, x, etc).
+
+
+Vport States
+------------
+
+  Vport instantiation consists of two parts:
+
+    - Creation with the kernel and LLDD. This means all transport and
+      driver data structures are built up, and device objects created.
+      This is equivalent to a driver "attach" on an adapter, which is
+      independent of the adapter's link state.
+    - Instantiation of the vport on the FC link via ELS traffic, etc.
+      This is equivalent to a "link up" and successful link initialization.
+
+  Further information can be found in the interfaces section below for
+  Vport Creation.
+
+  Once a vport has been instantiated with the kernel/LLDD, a vport state
+  can be reported via the sysfs attribute. The following states exist:
+
+    FC_VPORT_UNKNOWN            - Unknown
+      An temporary state, typically set only while the vport is being
+      instantiated with the kernel and LLDD.
+
+    FC_VPORT_ACTIVE             - Active
+      The vport has been successfully been created on the FC link.
+      It is fully functional.
+
+    FC_VPORT_DISABLED           - Disabled
+      The vport instantiated, but "disabled". The vport is not instantiated
+      on the FC link. This is equivalent to a physical port with the
+      link "down".
+
+    FC_VPORT_LINKDOWN           - Linkdown
+      The vport is not operational as the physical link is not operational.
+
+    FC_VPORT_INITIALIZING       - Initializing
+      The vport is in the process of instantiating on the FC link.
+      The LLDD will set this state just prior to starting the ELS traffic
+      to create the vport. This state will persist until the vport is
+      successfully created (state becomes FC_VPORT_ACTIVE) or it fails
+      (state is one of the values below).  As this state is transitory,
+      it will not be preserved in the "vport_last_state".
+
+    FC_VPORT_NO_FABRIC_SUPP     - No Fabric Support
+      The vport is not operational. One of the following conditions were
+      encountered:
+
+       - The FC topology is not Point-to-Point
+       - The FC port is not connected to an F_Port
+       - The F_Port has indicated that NPIV is not supported.
+
+    FC_VPORT_NO_FABRIC_RSCS     - No Fabric Resources
+      The vport is not operational. The Fabric failed FDISC with a status
+      indicating that it does not have sufficient resources to complete
+      the operation.
+
+    FC_VPORT_FABRIC_LOGOUT      - Fabric Logout
+      The vport is not operational. The Fabric has LOGO'd the N_Port_ID
+      associated with the vport.
+
+    FC_VPORT_FABRIC_REJ_WWN     - Fabric Rejected WWN
+      The vport is not operational. The Fabric failed FDISC with a status
+      indicating that the WWN's are not valid.
+
+    FC_VPORT_FAILED             - VPort Failed
+      The vport is not operational. This is a catchall for all other
+      error conditions.
+
+
+  The following state table indicates the different state transitions:
+
+   +------------------+--------------------------------+---------------------+
+   | State            | Event                          | New State           |
+   +==================+================================+=====================+
+   | n/a              | Initialization                 | Unknown             |
+   +------------------+--------------------------------+---------------------+
+   | Unknown:         | Link Down                      | Linkdown            |
+   |                  +--------------------------------+---------------------+
+   |                  | Link Up & Loop                 | No Fabric Support   |
+   |                  +--------------------------------+---------------------+
+   |                  | Link Up & no Fabric            | No Fabric Support   |
+   |                  +--------------------------------+---------------------+
+   |                  | Link Up & FLOGI response       | No Fabric Support   |
+   |                  | indicates no NPIV support      |                     |
+   |                  +--------------------------------+---------------------+
+   |                  | Link Up & FDISC being sent     | Initializing        |
+   |                  +--------------------------------+---------------------+
+   |                  | Disable request                | Disable             |
+   +------------------+--------------------------------+---------------------+
+   | Linkdown:        | Link Up                        | Unknown             |
+   +------------------+--------------------------------+---------------------+
+   | Initializing:    | FDISC ACC                      | Active              |
+   |                  +--------------------------------+---------------------+
+   |                  | FDISC LS_RJT w/ no resources   | No Fabric Resources |
+   |                  +--------------------------------+---------------------+
+   |                  | FDISC LS_RJT w/ invalid        | Fabric Rejected WWN |
+   |		      | pname or invalid nport_id      |                     |
+   |                  +--------------------------------+---------------------+
+   |                  | FDISC LS_RJT failed for        | Vport Failed        |
+   |                  | other reasons                  |                     |
+   |                  +--------------------------------+---------------------+
+   |                  | Link Down                      | Linkdown            |
+   |                  +--------------------------------+---------------------+
+   |                  | Disable request                | Disable             |
+   +------------------+--------------------------------+---------------------+
+   | Disable:         | Enable request                 | Unknown             |
+   +------------------+--------------------------------+---------------------+
+   | Active:          | LOGO received from fabric      | Fabric Logout       |
+   |                  +--------------------------------+---------------------+
+   |                  | Link Down                      | Linkdown            |
+   |                  +--------------------------------+---------------------+
+   |                  | Disable request                | Disable             |
+   +------------------+--------------------------------+---------------------+
+   | Fabric Logout:   | Link still up                  | Unknown             |
+   +------------------+--------------------------------+---------------------+
+
+The following 4 error states all have the same transitions::
+
+    No Fabric Support:
+    No Fabric Resources:
+    Fabric Rejected WWN:
+    Vport Failed:
+                        Disable request                 Disable
+                        Link goes down                  Linkdown
+
+
+Transport <-> LLDD Interfaces
+-----------------------------
+
+Vport support by LLDD:
+
+  The LLDD indicates support for vports by supplying a vport_create()
+  function in the transport template.  The presence of this function will
+  cause the creation of the new attributes on the fc_host.  As part of
+  the physical port completing its initialization relative to the
+  transport, it should set the max_npiv_vports attribute to indicate the
+  maximum number of vports the driver and/or adapter supports.
+
+
+Vport Creation:
+
+  The LLDD vport_create() syntax is::
+
+      int vport_create(struct fc_vport *vport, bool disable)
+
+  where:
+
+      =======   ===========================================================
+      vport     Is the newly allocated vport object
+      disable   If "true", the vport is to be created in a disabled stated.
+                If "false", the vport is to be enabled upon creation.
+      =======   ===========================================================
+
+  When a request is made to create a new vport (via sgio/netlink, or the
+  vport_create fc_host attribute), the transport will validate that the LLDD
+  can support another vport (e.g. max_npiv_vports > npiv_vports_inuse).
+  If not, the create request will be failed.  If space remains, the transport
+  will increment the vport count, create the vport object, and then call the
+  LLDD's vport_create() function with the newly allocated vport object.
+
+  As mentioned above, vport creation is divided into two parts:
+
+    - Creation with the kernel and LLDD. This means all transport and
+      driver data structures are built up, and device objects created.
+      This is equivalent to a driver "attach" on an adapter, which is
+      independent of the adapter's link state.
+    - Instantiation of the vport on the FC link via ELS traffic, etc.
+      This is equivalent to a "link up" and successful link initialization.
+
+  The LLDD's vport_create() function will not synchronously wait for both
+  parts to be fully completed before returning. It must validate that the
+  infrastructure exists to support NPIV, and complete the first part of
+  vport creation (data structure build up) before returning.  We do not
+  hinge vport_create() on the link-side operation mainly because:
+
+    - The link may be down. It is not a failure if it is. It simply
+      means the vport is in an inoperable state until the link comes up.
+      This is consistent with the link bouncing post vport creation.
+    - The vport may be created in a disabled state.
+    - This is consistent with a model where:  the vport equates to a
+      FC adapter. The vport_create is synonymous with driver attachment
+      to the adapter, which is independent of link state.
+
+  .. Note::
+
+      special error codes have been defined to delineate infrastructure
+      failure cases for quicker resolution.
+
+  The expected behavior for the LLDD's vport_create() function is:
+
+    - Validate Infrastructure:
+
+        - If the driver or adapter cannot support another vport, whether
+            due to improper firmware, (a lie about) max_npiv, or a lack of
+            some other resource - return VPCERR_UNSUPPORTED.
+        - If the driver validates the WWN's against those already active on
+            the adapter and detects an overlap - return VPCERR_BAD_WWN.
+        - If the driver detects the topology is loop, non-fabric, or the
+            FLOGI did not support NPIV - return VPCERR_NO_FABRIC_SUPP.
+
+    - Allocate data structures. If errors are encountered, such as out
+        of memory conditions, return the respective negative Exxx error code.
+    - If the role is FCP Initiator, the LLDD is to :
+
+        - Call scsi_host_alloc() to allocate a scsi_host for the vport.
+        - Call scsi_add_host(new_shost, &vport->dev) to start the scsi_host
+          and bind it as a child of the vport device.
+        - Initializes the fc_host attribute values.
+
+    - Kick of further vport state transitions based on the disable flag and
+        link state - and return success (zero).
+
+  LLDD Implementers Notes:
+
+  - It is suggested that there be a different fc_function_templates for
+    the physical port and the virtual port.  The physical port's template
+    would have the vport_create, vport_delete, and vport_disable functions,
+    while the vports would not.
+  - It is suggested that there be different scsi_host_templates
+    for the physical port and virtual port. Likely, there are driver
+    attributes, embedded into the scsi_host_template, that are applicable
+    for the physical port only (link speed, topology setting, etc). This
+    ensures that the attributes are applicable to the respective scsi_host.
+
+
+Vport Disable/Enable:
+
+  The LLDD vport_disable() syntax is::
+
+      int vport_disable(struct fc_vport *vport, bool disable)
+
+  where:
+
+      =======   =======================================
+      vport     Is vport to be enabled or disabled
+      disable   If "true", the vport is to be disabled.
+                If "false", the vport is to be enabled.
+      =======   =======================================
+
+  When a request is made to change the disabled state on a vport, the
+  transport will validate the request against the existing vport state.
+  If the request is to disable and the vport is already disabled, the
+  request will fail. Similarly, if the request is to enable, and the
+  vport is not in a disabled state, the request will fail.  If the request
+  is valid for the vport state, the transport will call the LLDD to
+  change the vport's state.
+
+  Within the LLDD, if a vport is disabled, it remains instantiated with
+  the kernel and LLDD, but it is not active or visible on the FC link in
+  any way. (see Vport Creation and the 2 part instantiation discussion).
+  The vport will remain in this state until it is deleted or re-enabled.
+  When enabling a vport, the LLDD reinstantiates the vport on the FC
+  link - essentially restarting the LLDD statemachine (see Vport States
+  above).
+
+
+Vport Deletion:
+
+  The LLDD vport_delete() syntax is::
+
+      int vport_delete(struct fc_vport *vport)
+
+  where:
+
+      vport:    Is vport to delete
+
+  When a request is made to delete a vport (via sgio/netlink, or via the
+  fc_host or fc_vport vport_delete attributes), the transport will call
+  the LLDD to terminate the vport on the FC link, and teardown all other
+  datastructures and references.  If the LLDD completes successfully,
+  the transport will teardown the vport objects and complete the vport
+  removal.  If the LLDD delete request fails, the vport object will remain,
+  but will be in an indeterminate state.
+
+  Within the LLDD, the normal code paths for a scsi_host teardown should
+  be followed. E.g. If the vport has a FCP Initiator role, the LLDD
+  will call fc_remove_host() for the vports scsi_host, followed by
+  scsi_remove_host() and scsi_host_put() for the vports scsi_host.
+
+
+Other:
+  fc_host port_type attribute:
+    There is a new fc_host port_type value - FC_PORTTYPE_NPIV. This value
+    must be set on all vport-based fc_hosts.  Normally, on a physical port,
+    the port_type attribute would be set to NPORT, NLPORT, etc based on the
+    topology type and existence of the fabric. As this is not applicable to
+    a vport, it makes more sense to report the FC mechanism used to create
+    the vport.
+
+  Driver unload:
+    FC drivers are required to call fc_remove_host() prior to calling
+    scsi_remove_host().  This allows the fc_host to tear down all remote
+    ports prior the scsi_host being torn down.  The fc_remove_host() call
+    was updated to remove all vports for the fc_host as well.
+
+
+Transport supplied functions
+----------------------------
+
+The following functions are supplied by the FC-transport for use by LLDs.
+
+   ==================   =========================
+   fc_vport_create      create a vport
+   fc_vport_terminate   detach and remove a vport
+   ==================   =========================
+
+Details::
+
+    /**
+    * fc_vport_create - Admin App or LLDD requests creation of a vport
+    * @shost:     scsi host the virtual port is connected to.
+    * @ids:       The world wide names, FC4 port roles, etc for
+    *              the virtual port.
+    *
+    * Notes:
+    *     This routine assumes no locks are held on entry.
+    */
+    struct fc_vport *
+    fc_vport_create(struct Scsi_Host *shost, struct fc_vport_identifiers *ids)
+
+    /**
+    * fc_vport_terminate - Admin App or LLDD requests termination of a vport
+    * @vport:      fc_vport to be terminated
+    *
+    * Calls the LLDD vport_delete() function, then deallocates and removes
+    * the vport from the shost and object tree.
+    *
+    * Notes:
+    *      This routine assumes no locks are held on entry.
+    */
+    int
+    fc_vport_terminate(struct fc_vport *vport)
+
+
+FC BSG support (CT & ELS passthru, and more)
+============================================
+
+<< To Be Supplied >>
+
+
+
+
+
+Credits
+=======
+The following people have contributed to this document:
+
+
+
+
+
+
+James Smart
+james.smart@emulex.com
+
diff --git a/Documentation/scsi/scsi_fc_transport.txt b/Documentation/scsi/scsi_fc_transport.txt
deleted file mode 100644
index f79282f..0000000
--- a/Documentation/scsi/scsi_fc_transport.txt
+++ /dev/null
@@ -1,496 +0,0 @@
-                             SCSI FC Tansport
-                 =============================================
-
-Date:  11/18/2008
-Kernel Revisions for features:
-  rports : <<TBS>>
-  vports : 2.6.22
-  bsg support : 2.6.30 (?TBD?)
-
-
-Introduction
-============
-This file documents the features and components of the SCSI FC Transport.
-It also provides documents the API between the transport and FC LLDDs.
-The FC transport can be found at:
-  drivers/scsi/scsi_transport_fc.c
-  include/scsi/scsi_transport_fc.h
-  include/scsi/scsi_netlink_fc.h
-  include/scsi/scsi_bsg_fc.h
-
-This file is found at Documentation/scsi/scsi_fc_transport.txt
-
-
-FC Remote Ports (rports)
-========================================================================
-<< To Be Supplied >>
-
-
-FC Virtual Ports (vports)
-========================================================================
-
-Overview:
--------------------------------
-
-  New FC standards have defined mechanisms which allows for a single physical
-  port to appear on as multiple communication ports. Using the N_Port Id
-  Virtualization (NPIV) mechanism, a point-to-point connection to a Fabric
-  can be assigned more than 1 N_Port_ID.  Each N_Port_ID appears as a
-  separate port to other endpoints on the fabric, even though it shares one
-  physical link to the switch for communication. Each N_Port_ID can have a
-  unique view of the fabric based on fabric zoning and array lun-masking
-  (just like a normal non-NPIV adapter).  Using the Virtual Fabric (VF)
-  mechanism, adding a fabric header to each frame allows the port to
-  interact with the Fabric Port to join multiple fabrics. The port will
-  obtain an N_Port_ID on each fabric it joins. Each fabric will have its
-  own unique view of endpoints and configuration parameters.  NPIV may be
-  used together with VF so that the port can obtain multiple N_Port_IDs
-  on each virtual fabric.
-
-  The FC transport is now recognizing a new object - a vport.  A vport is
-  an entity that has a world-wide unique World Wide Port Name (wwpn) and
-  World Wide Node Name (wwnn). The transport also allows for the FC4's to
-  be specified for the vport, with FCP_Initiator being the primary role
-  expected. Once instantiated by one of the above methods, it will have a
-  distinct N_Port_ID and view of fabric endpoints and storage entities.
-  The fc_host associated with the physical adapter will export the ability
-  to create vports. The transport will create the vport object within the
-  Linux device tree, and instruct the fc_host's driver to instantiate the
-  virtual port. Typically, the driver will create a new scsi_host instance
-  on the vport, resulting in a unique <H,C,T,L> namespace for the vport.
-  Thus, whether a FC port is based on a physical port or on a virtual port,
-  each will appear as a unique scsi_host with its own target and lun space.
-
-  Note: At this time, the transport is written to create only NPIV-based
-    vports. However, consideration was given to VF-based vports and it
-    should be a minor change to add support if needed.  The remaining
-    discussion will concentrate on NPIV.
-
-  Note: World Wide Name assignment (and uniqueness guarantees) are left
-    up to an administrative entity controlling the vport. For example,
-    if vports are to be associated with virtual machines, a XEN mgmt
-    utility would be responsible for creating wwpn/wwnn's for the vport,
-    using its own naming authority and OUI. (Note: it already does this
-    for virtual MAC addresses).
-
-
-Device Trees and Vport Objects:
--------------------------------
-
-  Today, the device tree typically contains the scsi_host object,
-  with rports and scsi target objects underneath it. Currently the FC
-  transport creates the vport object and places it under the scsi_host
-  object corresponding to the physical adapter.  The LLDD will allocate
-  a new scsi_host for the vport and link its object under the vport.
-  The remainder of the tree under the vports scsi_host is the same
-  as the non-NPIV case. The transport is written currently to easily
-  allow the parent of the vport to be something other than the scsi_host.
-  This could be used in the future to link the object onto a vm-specific
-  device tree. If the vport's parent is not the physical port's scsi_host,
-  a symbolic link to the vport object will be placed in the physical
-  port's scsi_host.
-
-  Here's what to expect in the device tree :
-   The typical Physical Port's Scsi_Host:
-     /sys/devices/.../host17/
-   and it has the typical descendant tree:
-     /sys/devices/.../host17/rport-17:0-0/target17:0:0/17:0:0:0:
-   and then the vport is created on the Physical Port:
-     /sys/devices/.../host17/vport-17:0-0
-   and the vport's Scsi_Host is then created:
-     /sys/devices/.../host17/vport-17:0-0/host18
-   and then the rest of the tree progresses, such as:
-     /sys/devices/.../host17/vport-17:0-0/host18/rport-18:0-0/target18:0:0/18:0:0:0:
-
-  Here's what to expect in the sysfs tree :
-   scsi_hosts:
-     /sys/class/scsi_host/host17                physical port's scsi_host
-     /sys/class/scsi_host/host18                vport's scsi_host
-   fc_hosts:
-     /sys/class/fc_host/host17                  physical port's fc_host
-     /sys/class/fc_host/host18                  vport's fc_host
-   fc_vports:
-     /sys/class/fc_vports/vport-17:0-0          the vport's fc_vport
-   fc_rports:
-     /sys/class/fc_remote_ports/rport-17:0-0    rport on the physical port
-     /sys/class/fc_remote_ports/rport-18:0-0    rport on the vport
-
-
-Vport Attributes:
--------------------------------
-
-  The new fc_vport class object has the following attributes
-
-     node_name:                                                 Read_Only
-       The WWNN of the vport
-
-     port_name:                                                 Read_Only
-       The WWPN of the vport
-
-     roles:                                                     Read_Only
-       Indicates the FC4 roles enabled on the vport.
-
-     symbolic_name:                                             Read_Write
-       A string, appended to the driver's symbolic port name string, which
-       is registered with the switch to identify the vport. For example,
-       a hypervisor could set this string to "Xen Domain 2 VM 5 Vport 2",
-       and this set of identifiers can be seen on switch management screens
-       to identify the port.
-
-     vport_delete:                                              Write_Only
-       When written with a "1", will tear down the vport.
-
-     vport_disable:                                             Write_Only
-       When written with a "1", will transition the vport to a disabled.
-       state.  The vport will still be instantiated with the Linux kernel,
-       but it will not be active on the FC link.
-       When written with a "0", will enable the vport.
-
-     vport_last_state:                                          Read_Only
-       Indicates the previous state of the vport.  See the section below on
-       "Vport States".
-
-     vport_state:                                               Read_Only
-       Indicates the state of the vport.  See the section below on
-       "Vport States".
-
-     vport_type:                                                Read_Only
-       Reflects the FC mechanism used to create the virtual port.
-       Only NPIV is supported currently.
-
-
-  For the fc_host class object, the following attributes are added for vports:
-
-     max_npiv_vports:                                           Read_Only
-       Indicates the maximum number of NPIV-based vports that the
-       driver/adapter can support on the fc_host.
-
-     npiv_vports_inuse:                                         Read_Only
-       Indicates how many NPIV-based vports have been instantiated on the
-       fc_host.
-
-     vport_create:                                              Write_Only
-       A "simple" create interface to instantiate a vport on an fc_host.
-       A "<WWPN>:<WWNN>" string is written to the attribute. The transport
-       then instantiates the vport object and calls the LLDD to create the
-       vport with the role of FCP_Initiator.  Each WWN is specified as 16
-       hex characters and may *not* contain any prefixes (e.g. 0x, x, etc).
-
-     vport_delete:                                              Write_Only
-        A "simple" delete interface to teardown a vport. A "<WWPN>:<WWNN>"
-        string is written to the attribute. The transport will locate the
-        vport on the fc_host with the same WWNs and tear it down.  Each WWN
-        is specified as 16 hex characters and may *not* contain any prefixes
-        (e.g. 0x, x, etc).
-
-
-Vport States:
--------------------------------
-
-  Vport instantiation consists of two parts:
-    - Creation with the kernel and LLDD. This means all transport and
-      driver data structures are built up, and device objects created.
-      This is equivalent to a driver "attach" on an adapter, which is
-      independent of the adapter's link state.
-    - Instantiation of the vport on the FC link via ELS traffic, etc.
-      This is equivalent to a "link up" and successful link initialization.
-  Further information can be found in the interfaces section below for
-  Vport Creation.
-
-  Once a vport has been instantiated with the kernel/LLDD, a vport state
-  can be reported via the sysfs attribute. The following states exist:
-
-    FC_VPORT_UNKNOWN            - Unknown
-      An temporary state, typically set only while the vport is being
-      instantiated with the kernel and LLDD.
-
-    FC_VPORT_ACTIVE             - Active
-      The vport has been successfully been created on the FC link.
-      It is fully functional.
-
-    FC_VPORT_DISABLED           - Disabled
-      The vport instantiated, but "disabled". The vport is not instantiated
-      on the FC link. This is equivalent to a physical port with the
-      link "down".
-
-    FC_VPORT_LINKDOWN           - Linkdown
-      The vport is not operational as the physical link is not operational.
-
-    FC_VPORT_INITIALIZING       - Initializing
-      The vport is in the process of instantiating on the FC link.
-      The LLDD will set this state just prior to starting the ELS traffic
-      to create the vport. This state will persist until the vport is
-      successfully created (state becomes FC_VPORT_ACTIVE) or it fails
-      (state is one of the values below).  As this state is transitory,
-      it will not be preserved in the "vport_last_state".
-
-    FC_VPORT_NO_FABRIC_SUPP     - No Fabric Support
-      The vport is not operational. One of the following conditions were
-      encountered:
-       - The FC topology is not Point-to-Point
-       - The FC port is not connected to an F_Port
-       - The F_Port has indicated that NPIV is not supported.
-
-    FC_VPORT_NO_FABRIC_RSCS     - No Fabric Resources
-      The vport is not operational. The Fabric failed FDISC with a status
-      indicating that it does not have sufficient resources to complete
-      the operation.
-
-    FC_VPORT_FABRIC_LOGOUT      - Fabric Logout
-      The vport is not operational. The Fabric has LOGO'd the N_Port_ID
-      associated with the vport.
-
-    FC_VPORT_FABRIC_REJ_WWN     - Fabric Rejected WWN
-      The vport is not operational. The Fabric failed FDISC with a status
-      indicating that the WWN's are not valid.
-
-    FC_VPORT_FAILED             - VPort Failed
-      The vport is not operational. This is a catchall for all other
-      error conditions.
-
-
-  The following state table indicates the different state transitions:
-
-    State              Event                            New State
-    --------------------------------------------------------------------
-     n/a                Initialization                  Unknown
-    Unknown:            Link Down                       Linkdown
-                        Link Up & Loop                  No Fabric Support
-                        Link Up & no Fabric             No Fabric Support
-                        Link Up & FLOGI response        No Fabric Support
-                          indicates no NPIV support
-                        Link Up & FDISC being sent      Initializing
-                        Disable request                 Disable
-    Linkdown:           Link Up                         Unknown
-    Initializing:       FDISC ACC                       Active
-                        FDISC LS_RJT w/ no resources    No Fabric Resources
-                        FDISC LS_RJT w/ invalid         Fabric Rejected WWN
-                          pname or invalid nport_id
-                        FDISC LS_RJT failed for         Vport Failed
-                          other reasons
-                        Link Down                       Linkdown
-                        Disable request                 Disable
-    Disable:            Enable request                  Unknown
-    Active:             LOGO received from fabric       Fabric Logout
-                        Link Down                       Linkdown
-                        Disable request                 Disable
-    Fabric Logout:      Link still up                   Unknown
-
-         The following 4 error states all have the same transitions:
-    No Fabric Support:
-    No Fabric Resources:
-    Fabric Rejected WWN:
-    Vport Failed:
-                        Disable request                 Disable
-                        Link goes down                  Linkdown
-
-
-Transport <-> LLDD Interfaces :
--------------------------------
-
-Vport support by LLDD:
-
-  The LLDD indicates support for vports by supplying a vport_create()
-  function in the transport template.  The presence of this function will
-  cause the creation of the new attributes on the fc_host.  As part of
-  the physical port completing its initialization relative to the
-  transport, it should set the max_npiv_vports attribute to indicate the
-  maximum number of vports the driver and/or adapter supports.
-
-
-Vport Creation:
-
-  The LLDD vport_create() syntax is:
-
-      int vport_create(struct fc_vport *vport, bool disable)
-
-    where:
-      vport:    Is the newly allocated vport object
-      disable:  If "true", the vport is to be created in a disabled stated.
-                If "false", the vport is to be enabled upon creation.
-
-  When a request is made to create a new vport (via sgio/netlink, or the
-  vport_create fc_host attribute), the transport will validate that the LLDD
-  can support another vport (e.g. max_npiv_vports > npiv_vports_inuse).
-  If not, the create request will be failed.  If space remains, the transport
-  will increment the vport count, create the vport object, and then call the
-  LLDD's vport_create() function with the newly allocated vport object.
-
-  As mentioned above, vport creation is divided into two parts:
-    - Creation with the kernel and LLDD. This means all transport and
-      driver data structures are built up, and device objects created.
-      This is equivalent to a driver "attach" on an adapter, which is
-      independent of the adapter's link state.
-    - Instantiation of the vport on the FC link via ELS traffic, etc.
-      This is equivalent to a "link up" and successful link initialization.
-
-  The LLDD's vport_create() function will not synchronously wait for both
-  parts to be fully completed before returning. It must validate that the
-  infrastructure exists to support NPIV, and complete the first part of
-  vport creation (data structure build up) before returning.  We do not
-  hinge vport_create() on the link-side operation mainly because:
-    - The link may be down. It is not a failure if it is. It simply
-      means the vport is in an inoperable state until the link comes up.
-      This is consistent with the link bouncing post vport creation.
-    - The vport may be created in a disabled state.
-    - This is consistent with a model where:  the vport equates to a
-      FC adapter. The vport_create is synonymous with driver attachment
-      to the adapter, which is independent of link state.
-
-    Note: special error codes have been defined to delineate infrastructure
-      failure cases for quicker resolution.
-
-  The expected behavior for the LLDD's vport_create() function is:
-    - Validate Infrastructure:
-        - If the driver or adapter cannot support another vport, whether
-            due to improper firmware, (a lie about) max_npiv, or a lack of
-            some other resource - return VPCERR_UNSUPPORTED.
-        - If the driver validates the WWN's against those already active on
-            the adapter and detects an overlap - return VPCERR_BAD_WWN.
-        - If the driver detects the topology is loop, non-fabric, or the
-            FLOGI did not support NPIV - return VPCERR_NO_FABRIC_SUPP.
-    - Allocate data structures. If errors are encountered, such as out
-        of memory conditions, return the respective negative Exxx error code.
-    - If the role is FCP Initiator, the LLDD is to :
-        - Call scsi_host_alloc() to allocate a scsi_host for the vport.
-        - Call scsi_add_host(new_shost, &vport->dev) to start the scsi_host
-          and bind it as a child of the vport device.
-        - Initializes the fc_host attribute values.
-    - Kick of further vport state transitions based on the disable flag and
-        link state - and return success (zero).
-
-  LLDD Implementers Notes:
-  - It is suggested that there be a different fc_function_templates for
-    the physical port and the virtual port.  The physical port's template
-    would have the vport_create, vport_delete, and vport_disable functions,
-    while the vports would not.
-  - It is suggested that there be different scsi_host_templates
-    for the physical port and virtual port. Likely, there are driver
-    attributes, embedded into the scsi_host_template, that are applicable
-    for the physical port only (link speed, topology setting, etc). This
-    ensures that the attributes are applicable to the respective scsi_host.
-
-
-Vport Disable/Enable:
-
-  The LLDD vport_disable() syntax is:
-
-      int vport_disable(struct fc_vport *vport, bool disable)
-
-    where:
-      vport:    Is vport to be enabled or disabled
-      disable:  If "true", the vport is to be disabled.
-                If "false", the vport is to be enabled.
-
-  When a request is made to change the disabled state on a vport, the
-  transport will validate the request against the existing vport state.
-  If the request is to disable and the vport is already disabled, the
-  request will fail. Similarly, if the request is to enable, and the
-  vport is not in a disabled state, the request will fail.  If the request
-  is valid for the vport state, the transport will call the LLDD to
-  change the vport's state.
-
-  Within the LLDD, if a vport is disabled, it remains instantiated with
-  the kernel and LLDD, but it is not active or visible on the FC link in
-  any way. (see Vport Creation and the 2 part instantiation discussion).
-  The vport will remain in this state until it is deleted or re-enabled.
-  When enabling a vport, the LLDD reinstantiates the vport on the FC
-  link - essentially restarting the LLDD statemachine (see Vport States
-  above).
-
-
-Vport Deletion:
-
-  The LLDD vport_delete() syntax is:
-
-      int vport_delete(struct fc_vport *vport)
-
-    where:
-      vport:    Is vport to delete
-
-  When a request is made to delete a vport (via sgio/netlink, or via the
-  fc_host or fc_vport vport_delete attributes), the transport will call
-  the LLDD to terminate the vport on the FC link, and teardown all other
-  datastructures and references.  If the LLDD completes successfully,
-  the transport will teardown the vport objects and complete the vport
-  removal.  If the LLDD delete request fails, the vport object will remain,
-  but will be in an indeterminate state.
-
-  Within the LLDD, the normal code paths for a scsi_host teardown should
-  be followed. E.g. If the vport has a FCP Initiator role, the LLDD
-  will call fc_remove_host() for the vports scsi_host, followed by
-  scsi_remove_host() and scsi_host_put() for the vports scsi_host.
-
-
-Other:
-  fc_host port_type attribute:
-    There is a new fc_host port_type value - FC_PORTTYPE_NPIV. This value
-    must be set on all vport-based fc_hosts.  Normally, on a physical port,
-    the port_type attribute would be set to NPORT, NLPORT, etc based on the
-    topology type and existence of the fabric. As this is not applicable to
-    a vport, it makes more sense to report the FC mechanism used to create
-    the vport.
-
-  Driver unload:
-    FC drivers are required to call fc_remove_host() prior to calling
-    scsi_remove_host().  This allows the fc_host to tear down all remote
-    ports prior the scsi_host being torn down.  The fc_remove_host() call
-    was updated to remove all vports for the fc_host as well.
-
-
-Transport supplied functions
-----------------------------
-
-The following functions are supplied by the FC-transport for use by LLDs.
-
-   fc_vport_create - create a vport
-   fc_vport_terminate - detach and remove a vport
-
-Details:
-
-/**
- * fc_vport_create - Admin App or LLDD requests creation of a vport
- * @shost:     scsi host the virtual port is connected to.
- * @ids:       The world wide names, FC4 port roles, etc for
- *              the virtual port.
- *
- * Notes:
- *     This routine assumes no locks are held on entry.
- */
-struct fc_vport *
-fc_vport_create(struct Scsi_Host *shost, struct fc_vport_identifiers *ids)
-
-/**
- * fc_vport_terminate - Admin App or LLDD requests termination of a vport
- * @vport:      fc_vport to be terminated
- *
- * Calls the LLDD vport_delete() function, then deallocates and removes
- * the vport from the shost and object tree.
- *
- * Notes:
- *      This routine assumes no locks are held on entry.
- */
-int
-fc_vport_terminate(struct fc_vport *vport)
-
-
-FC BSG support (CT & ELS passthru, and more)
-========================================================================
-<< To Be Supplied >>
-
-
-
-
-
-Credits
-=======
-The following people have contributed to this document:
-
-
-
-
-
-
-James Smart
-james.smart@emulex.com
-
diff --git a/Documentation/scsi/scsi_mid_low_api.rst b/Documentation/scsi/scsi_mid_low_api.rst
new file mode 100644
index 0000000..5358bc1
--- /dev/null
+++ b/Documentation/scsi/scsi_mid_low_api.rst
@@ -0,0 +1,1313 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=============================================
+SCSI mid_level - lower_level driver interface
+=============================================
+
+Introduction
+============
+This document outlines the interface between the Linux SCSI mid level and
+SCSI lower level drivers. Lower level drivers (LLDs) are variously called
+host bus adapter (HBA) drivers and host drivers (HD). A "host" in this
+context is a bridge between a computer IO bus (e.g. PCI or ISA) and a
+single SCSI initiator port on a SCSI transport. An "initiator" port
+(SCSI terminology, see SAM-3 at http://www.t10.org) sends SCSI commands
+to "target" SCSI ports (e.g. disks). There can be many LLDs in a running
+system, but only one per hardware type. Most LLDs can control one or more
+SCSI HBAs. Some HBAs contain multiple hosts.
+
+In some cases the SCSI transport is an external bus that already has
+its own subsystem in Linux (e.g. USB and ieee1394). In such cases the
+SCSI subsystem LLD is a software bridge to the other driver subsystem.
+Examples are the usb-storage driver (found in the drivers/usb/storage
+directory) and the ieee1394/sbp2 driver (found in the drivers/ieee1394
+directory).
+
+For example, the aic7xxx LLD controls Adaptec SCSI parallel interface
+(SPI) controllers based on that company's 7xxx chip series. The aic7xxx
+LLD can be built into the kernel or loaded as a module. There can only be
+one aic7xxx LLD running in a Linux system but it may be controlling many
+HBAs. These HBAs might be either on PCI daughter-boards or built into
+the motherboard (or both). Some aic7xxx based HBAs are dual controllers
+and thus represent two hosts. Like most modern HBAs, each aic7xxx host
+has its own PCI device address. [The one-to-one correspondence between
+a SCSI host and a PCI device is common but not required (e.g. with
+ISA adapters).]
+
+The SCSI mid level isolates an LLD from other layers such as the SCSI
+upper layer drivers and the block layer.
+
+This version of the document roughly matches linux kernel version 2.6.8 .
+
+Documentation
+=============
+There is a SCSI documentation directory within the kernel source tree,
+typically Documentation/scsi . Most documents are in plain
+(i.e. ASCII) text. This file is named scsi_mid_low_api.txt and can be
+found in that directory. A more recent copy of this document may be found
+at http://web.archive.org/web/20070107183357rn_1/sg.torque.net/scsi/.
+Many LLDs are documented there (e.g. aic7xxx.txt). The SCSI mid-level is
+briefly described in scsi.txt which contains a url to a document
+describing the SCSI subsystem in the lk 2.4 series. Two upper level
+drivers have documents in that directory: st.txt (SCSI tape driver) and
+scsi-generic.txt (for the sg driver).
+
+Some documentation (or urls) for LLDs may be found in the C source code
+or in the same directory as the C source code. For example to find a url
+about the USB mass storage driver see the
+/usr/src/linux/drivers/usb/storage directory.
+
+Driver structure
+================
+Traditionally an LLD for the SCSI subsystem has been at least two files in
+the drivers/scsi directory. For example, a driver called "xyz" has a header
+file "xyz.h" and a source file "xyz.c". [Actually there is no good reason
+why this couldn't all be in one file; the header file is superfluous.] Some
+drivers that have been ported to several operating systems have more than
+two files. For example the aic7xxx driver has separate files for generic
+and OS-specific code (e.g. FreeBSD and Linux). Such drivers tend to have
+their own directory under the drivers/scsi directory.
+
+When a new LLD is being added to Linux, the following files (found in the
+drivers/scsi directory) will need some attention: Makefile and Kconfig .
+It is probably best to study how existing LLDs are organized.
+
+As the 2.5 series development kernels evolve into the 2.6 series
+production series, changes are being introduced into this interface. An
+example of this is driver initialization code where there are now 2 models
+available. The older one, similar to what was found in the lk 2.4 series,
+is based on hosts that are detected at HBA driver load time. This will be
+referred to the "passive" initialization model. The newer model allows HBAs
+to be hot plugged (and unplugged) during the lifetime of the LLD and will
+be referred to as the "hotplug" initialization model. The newer model is
+preferred as it can handle both traditional SCSI equipment that is
+permanently connected as well as modern "SCSI" devices (e.g. USB or
+IEEE 1394 connected digital cameras) that are hotplugged. Both
+initialization models are discussed in the following sections.
+
+An LLD interfaces to the SCSI subsystem several ways:
+
+  a) directly invoking functions supplied by the mid level
+  b) passing a set of function pointers to a registration function
+     supplied by the mid level. The mid level will then invoke these
+     functions at some point in the future. The LLD will supply
+     implementations of these functions.
+  c) direct access to instances of well known data structures maintained
+     by the mid level
+
+Those functions in group a) are listed in a section entitled "Mid level
+supplied functions" below.
+
+Those functions in group b) are listed in a section entitled "Interface
+functions" below. Their function pointers are placed in the members of
+"struct scsi_host_template", an instance of which is passed to
+scsi_host_alloc() [#]_.  Those interface functions that the LLD does not
+wish to supply should have NULL placed in the corresponding member of
+struct scsi_host_template.  Defining an instance of struct
+scsi_host_template at file scope will cause NULL to be  placed in function
+pointer members not explicitly initialized.
+
+Those usages in group c) should be handled with care, especially in a
+"hotplug" environment. LLDs should be aware of the lifetime of instances
+that are shared with the mid level and other layers.
+
+All functions defined within an LLD and all data defined at file scope
+should be static. For example the slave_alloc() function in an LLD
+called "xxx" could be defined as
+``static int xxx_slave_alloc(struct scsi_device * sdev) { /* code */ }``
+
+.. [#] the scsi_host_alloc() function is a replacement for the rather vaguely
+       named scsi_register() function in most situations.
+
+
+Hotplug initialization model
+============================
+In this model an LLD controls when SCSI hosts are introduced and removed
+from the SCSI subsystem. Hosts can be introduced as early as driver
+initialization and removed as late as driver shutdown. Typically a driver
+will respond to a sysfs probe() callback that indicates an HBA has been
+detected. After confirming that the new device is one that the LLD wants
+to control, the LLD will initialize the HBA and then register a new host
+with the SCSI mid level.
+
+During LLD initialization the driver should register itself with the
+appropriate IO bus on which it expects to find HBA(s) (e.g. the PCI bus).
+This can probably be done via sysfs. Any driver parameters (especially
+those that are writable after the driver is loaded) could also be
+registered with sysfs at this point. The SCSI mid level first becomes
+aware of an LLD when that LLD registers its first HBA.
+
+At some later time, the LLD becomes aware of an HBA and what follows
+is a typical sequence of calls between the LLD and the mid level.
+This example shows the mid level scanning the newly introduced HBA for 3
+scsi devices of which only the first 2 respond::
+
+	HBA PROBE: assume 2 SCSI devices found in scan
+    LLD                   mid level                    LLD
+    ===-------------------=========--------------------===------
+    scsi_host_alloc()  -->
+    scsi_add_host()  ---->
+    scsi_scan_host()  -------+
+			    |
+			slave_alloc()
+			slave_configure() -->  scsi_change_queue_depth()
+			    |
+			slave_alloc()
+			slave_configure()
+			    |
+			slave_alloc()   ***
+			slave_destroy() ***
+
+
+    *** For scsi devices that the mid level tries to scan but do not
+	respond, a slave_alloc(), slave_destroy() pair is called.
+
+If the LLD wants to adjust the default queue settings, it can invoke
+scsi_change_queue_depth() in its slave_configure() routine.
+
+When an HBA is being removed it could be as part of an orderly shutdown
+associated with the LLD module being unloaded (e.g. with the "rmmod"
+command) or in response to a "hot unplug" indicated by sysfs()'s
+remove() callback being invoked. In either case, the sequence is the
+same::
+
+	    HBA REMOVE: assume 2 SCSI devices attached
+    LLD                      mid level                 LLD
+    ===----------------------=========-----------------===------
+    scsi_remove_host() ---------+
+				|
+			slave_destroy()
+			slave_destroy()
+    scsi_host_put()
+
+It may be useful for a LLD to keep track of struct Scsi_Host instances
+(a pointer is returned by scsi_host_alloc()). Such instances are "owned"
+by the mid-level.  struct Scsi_Host instances are freed from
+scsi_host_put() when the reference count hits zero.
+
+Hot unplugging an HBA that controls a disk which is processing SCSI
+commands on a mounted file system is an interesting situation. Reference
+counting logic is being introduced into the mid level to cope with many
+of the issues involved. See the section on reference counting below.
+
+
+The hotplug concept may be extended to SCSI devices. Currently, when an
+HBA is added, the scsi_scan_host() function causes a scan for SCSI devices
+attached to the HBA's SCSI transport. On newer SCSI transports the HBA
+may become aware of a new SCSI device _after_ the scan has completed.
+An LLD can use this sequence to make the mid level aware of a SCSI device::
+
+		    SCSI DEVICE hotplug
+    LLD                   mid level                    LLD
+    ===-------------------=========--------------------===------
+    scsi_add_device()  ------+
+			    |
+			slave_alloc()
+			slave_configure()   [--> scsi_change_queue_depth()]
+
+In a similar fashion, an LLD may become aware that a SCSI device has been
+removed (unplugged) or the connection to it has been interrupted. Some
+existing SCSI transports (e.g. SPI) may not become aware that a SCSI
+device has been removed until a subsequent SCSI command fails which will
+probably cause that device to be set offline by the mid level. An LLD that
+detects the removal of a SCSI device can instigate its removal from
+upper layers with this sequence::
+
+		    SCSI DEVICE hot unplug
+    LLD                      mid level                 LLD
+    ===----------------------=========-----------------===------
+    scsi_remove_device() -------+
+				|
+			slave_destroy()
+
+It may be useful for an LLD to keep track of struct scsi_device instances
+(a pointer is passed as the parameter to slave_alloc() and
+slave_configure() callbacks). Such instances are "owned" by the mid-level.
+struct scsi_device instances are freed after slave_destroy().
+
+
+Reference Counting
+==================
+The Scsi_Host structure has had reference counting infrastructure added.
+This effectively spreads the ownership of struct Scsi_Host instances
+across the various SCSI layers which use them. Previously such instances
+were exclusively owned by the mid level. LLDs would not usually need to
+directly manipulate these reference counts but there may be some cases
+where they do.
+
+There are 3 reference counting functions of interest associated with
+struct Scsi_Host:
+
+  - scsi_host_alloc():
+	returns a pointer to new instance of struct
+        Scsi_Host which has its reference count ^^ set to 1
+
+  - scsi_host_get():
+	adds 1 to the reference count of the given instance
+
+  - scsi_host_put():
+	decrements 1 from the reference count of the given
+        instance. If the reference count reaches 0 then the given instance
+        is freed
+
+The scsi_device structure has had reference counting infrastructure added.
+This effectively spreads the ownership of struct scsi_device instances
+across the various SCSI layers which use them. Previously such instances
+were exclusively owned by the mid level. See the access functions declared
+towards the end of include/scsi/scsi_device.h . If an LLD wants to keep
+a copy of a pointer to a scsi_device instance it should use scsi_device_get()
+to bump its reference count. When it is finished with the pointer it can
+use scsi_device_put() to decrement its reference count (and potentially
+delete it).
+
+.. Note::
+
+   struct Scsi_Host actually has 2 reference counts which are manipulated
+   in parallel by these functions.
+
+
+Conventions
+===========
+First, Linus Torvalds's thoughts on C coding style can be found in the
+Documentation/process/coding-style.rst file.
+
+Next, there is a movement to "outlaw" typedefs introducing synonyms for
+struct tags. Both can be still found in the SCSI subsystem, but
+the typedefs have been moved to a single file, scsi_typedefs.h to
+make their future removal easier, for example:
+"typedef struct scsi_cmnd Scsi_Cmnd;"
+
+Also, most C99 enhancements are encouraged to the extent they are supported
+by the relevant gcc compilers. So C99 style structure and array
+initializers are encouraged where appropriate. Don't go too far,
+VLAs are not properly supported yet.  An exception to this is the use of
+``//`` style comments; ``/*...*/`` comments are still preferred in Linux.
+
+Well written, tested and documented code, need not be re-formatted to
+comply with the above conventions. For example, the aic7xxx driver
+comes to Linux from FreeBSD and Adaptec's own labs. No doubt FreeBSD
+and Adaptec have their own coding conventions.
+
+
+Mid level supplied functions
+============================
+These functions are supplied by the SCSI mid level for use by LLDs.
+The names (i.e. entry points) of these functions are exported
+so an LLD that is a module can access them. The kernel will
+arrange for the SCSI mid level to be loaded and initialized before any LLD
+is initialized. The functions below are listed alphabetically and their
+names all start with ``scsi_``.
+
+Summary:
+
+  - scsi_add_device - creates new scsi device (lu) instance
+  - scsi_add_host - perform sysfs registration and set up transport class
+  - scsi_change_queue_depth - change the queue depth on a SCSI device
+  - scsi_bios_ptable - return copy of block device's partition table
+  - scsi_block_requests - prevent further commands being queued to given host
+  - scsi_host_alloc - return a new scsi_host instance whose refcount==1
+  - scsi_host_get - increments Scsi_Host instance's refcount
+  - scsi_host_put - decrements Scsi_Host instance's refcount (free if 0)
+  - scsi_register - create and register a scsi host adapter instance.
+  - scsi_remove_device - detach and remove a SCSI device
+  - scsi_remove_host - detach and remove all SCSI devices owned by host
+  - scsi_report_bus_reset - report scsi _bus_ reset observed
+  - scsi_scan_host - scan SCSI bus
+  - scsi_track_queue_full - track successive QUEUE_FULL events
+  - scsi_unblock_requests - allow further commands to be queued to given host
+  - scsi_unregister - [calls scsi_host_put()]
+
+
+Details::
+
+    /**
+    * scsi_add_device - creates new scsi device (lu) instance
+    * @shost:   pointer to scsi host instance
+    * @channel: channel number (rarely other than 0)
+    * @id:      target id number
+    * @lun:     logical unit number
+    *
+    *      Returns pointer to new struct scsi_device instance or
+    *      ERR_PTR(-ENODEV) (or some other bent pointer) if something is
+    *      wrong (e.g. no lu responds at given address)
+    *
+    *      Might block: yes
+    *
+    *      Notes: This call is usually performed internally during a scsi
+    *      bus scan when an HBA is added (i.e. scsi_scan_host()). So it
+    *      should only be called if the HBA becomes aware of a new scsi
+    *      device (lu) after scsi_scan_host() has completed. If successful
+    *      this call can lead to slave_alloc() and slave_configure() callbacks
+    *      into the LLD.
+    *
+    *      Defined in: drivers/scsi/scsi_scan.c
+    **/
+    struct scsi_device * scsi_add_device(struct Scsi_Host *shost,
+					unsigned int channel,
+					unsigned int id, unsigned int lun)
+
+
+    /**
+    * scsi_add_host - perform sysfs registration and set up transport class
+    * @shost:   pointer to scsi host instance
+    * @dev:     pointer to struct device of type scsi class
+    *
+    *      Returns 0 on success, negative errno of failure (e.g. -ENOMEM)
+    *
+    *      Might block: no
+    *
+    *      Notes: Only required in "hotplug initialization model" after a
+    *      successful call to scsi_host_alloc().  This function does not
+    *	scan the bus; this can be done by calling scsi_scan_host() or
+    *	in some other transport-specific way.  The LLD must set up
+    *	the transport template before calling this function and may only
+    *	access the transport class data after this function has been called.
+    *
+    *      Defined in: drivers/scsi/hosts.c
+    **/
+    int scsi_add_host(struct Scsi_Host *shost, struct device * dev)
+
+
+    /**
+    * scsi_change_queue_depth - allow LLD to change queue depth on a SCSI device
+    * @sdev:       pointer to SCSI device to change queue depth on
+    * @tags        Number of tags allowed if tagged queuing enabled,
+    *              or number of commands the LLD can queue up
+    *              in non-tagged mode (as per cmd_per_lun).
+    *
+    *      Returns nothing
+    *
+    *      Might block: no
+    *
+    *      Notes: Can be invoked any time on a SCSI device controlled by this
+    *      LLD. [Specifically during and after slave_configure() and prior to
+    *      slave_destroy().] Can safely be invoked from interrupt code.
+    *
+    *      Defined in: drivers/scsi/scsi.c [see source code for more notes]
+    *
+    **/
+    int scsi_change_queue_depth(struct scsi_device *sdev, int tags)
+
+
+    /**
+    * scsi_bios_ptable - return copy of block device's partition table
+    * @dev:        pointer to block device
+    *
+    *      Returns pointer to partition table, or NULL for failure
+    *
+    *      Might block: yes
+    *
+    *      Notes: Caller owns memory returned (free with kfree() )
+    *
+    *      Defined in: drivers/scsi/scsicam.c
+    **/
+    unsigned char *scsi_bios_ptable(struct block_device *dev)
+
+
+    /**
+    * scsi_block_requests - prevent further commands being queued to given host
+    *
+    * @shost: pointer to host to block commands on
+    *
+    *      Returns nothing
+    *
+    *      Might block: no
+    *
+    *      Notes: There is no timer nor any other means by which the requests
+    *      get unblocked other than the LLD calling scsi_unblock_requests().
+    *
+    *      Defined in: drivers/scsi/scsi_lib.c
+    **/
+    void scsi_block_requests(struct Scsi_Host * shost)
+
+
+    /**
+    * scsi_host_alloc - create a scsi host adapter instance and perform basic
+    *                   initialization.
+    * @sht:        pointer to scsi host template
+    * @privsize:   extra bytes to allocate in hostdata array (which is the
+    *              last member of the returned Scsi_Host instance)
+    *
+    *      Returns pointer to new Scsi_Host instance or NULL on failure
+    *
+    *      Might block: yes
+    *
+    *      Notes: When this call returns to the LLD, the SCSI bus scan on
+    *      this host has _not_ yet been done.
+    *      The hostdata array (by default zero length) is a per host scratch
+    *      area for the LLD's exclusive use.
+    *      Both associated refcounting objects have their refcount set to 1.
+    *      Full registration (in sysfs) and a bus scan are performed later when
+    *      scsi_add_host() and scsi_scan_host() are called.
+    *
+    *      Defined in: drivers/scsi/hosts.c .
+    **/
+    struct Scsi_Host * scsi_host_alloc(struct scsi_host_template * sht,
+				    int privsize)
+
+
+    /**
+    * scsi_host_get - increment Scsi_Host instance refcount
+    * @shost:   pointer to struct Scsi_Host instance
+    *
+    *      Returns nothing
+    *
+    *      Might block: currently may block but may be changed to not block
+    *
+    *      Notes: Actually increments the counts in two sub-objects
+    *
+    *      Defined in: drivers/scsi/hosts.c
+    **/
+    void scsi_host_get(struct Scsi_Host *shost)
+
+
+    /**
+    * scsi_host_put - decrement Scsi_Host instance refcount, free if 0
+    * @shost:   pointer to struct Scsi_Host instance
+    *
+    *      Returns nothing
+    *
+    *      Might block: currently may block but may be changed to not block
+    *
+    *      Notes: Actually decrements the counts in two sub-objects. If the
+    *      latter refcount reaches 0, the Scsi_Host instance is freed.
+    *      The LLD need not worry exactly when the Scsi_Host instance is
+    *      freed, it just shouldn't access the instance after it has balanced
+    *      out its refcount usage.
+    *
+    *      Defined in: drivers/scsi/hosts.c
+    **/
+    void scsi_host_put(struct Scsi_Host *shost)
+
+
+    /**
+    * scsi_register - create and register a scsi host adapter instance.
+    * @sht:        pointer to scsi host template
+    * @privsize:   extra bytes to allocate in hostdata array (which is the
+    *              last member of the returned Scsi_Host instance)
+    *
+    *      Returns pointer to new Scsi_Host instance or NULL on failure
+    *
+    *      Might block: yes
+    *
+    *      Notes: When this call returns to the LLD, the SCSI bus scan on
+    *      this host has _not_ yet been done.
+    *      The hostdata array (by default zero length) is a per host scratch
+    *      area for the LLD.
+    *
+    *      Defined in: drivers/scsi/hosts.c .
+    **/
+    struct Scsi_Host * scsi_register(struct scsi_host_template * sht,
+				    int privsize)
+
+
+    /**
+    * scsi_remove_device - detach and remove a SCSI device
+    * @sdev:      a pointer to a scsi device instance
+    *
+    *      Returns value: 0 on success, -EINVAL if device not attached
+    *
+    *      Might block: yes
+    *
+    *      Notes: If an LLD becomes aware that a scsi device (lu) has
+    *      been removed but its host is still present then it can request
+    *      the removal of that scsi device. If successful this call will
+    *      lead to the slave_destroy() callback being invoked. sdev is an
+    *      invalid pointer after this call.
+    *
+    *      Defined in: drivers/scsi/scsi_sysfs.c .
+    **/
+    int scsi_remove_device(struct scsi_device *sdev)
+
+
+    /**
+    * scsi_remove_host - detach and remove all SCSI devices owned by host
+    * @shost:      a pointer to a scsi host instance
+    *
+    *      Returns value: 0 on success, 1 on failure (e.g. LLD busy ??)
+    *
+    *      Might block: yes
+    *
+    *      Notes: Should only be invoked if the "hotplug initialization
+    *      model" is being used. It should be called _prior_ to
+    *      scsi_unregister().
+    *
+    *      Defined in: drivers/scsi/hosts.c .
+    **/
+    int scsi_remove_host(struct Scsi_Host *shost)
+
+
+    /**
+    * scsi_report_bus_reset - report scsi _bus_ reset observed
+    * @shost: a pointer to a scsi host involved
+    * @channel: channel (within) host on which scsi bus reset occurred
+    *
+    *      Returns nothing
+    *
+    *      Might block: no
+    *
+    *      Notes: This only needs to be called if the reset is one which
+    *      originates from an unknown location.  Resets originated by the
+    *      mid level itself don't need to call this, but there should be
+    *      no harm.  The main purpose of this is to make sure that a
+    *      CHECK_CONDITION is properly treated.
+    *
+    *      Defined in: drivers/scsi/scsi_error.c .
+    **/
+    void scsi_report_bus_reset(struct Scsi_Host * shost, int channel)
+
+
+    /**
+    * scsi_scan_host - scan SCSI bus
+    * @shost: a pointer to a scsi host instance
+    *
+    *	Might block: yes
+    *
+    *	Notes: Should be called after scsi_add_host()
+    *
+    *	Defined in: drivers/scsi/scsi_scan.c
+    **/
+    void scsi_scan_host(struct Scsi_Host *shost)
+
+
+    /**
+    * scsi_track_queue_full - track successive QUEUE_FULL events on given
+    *                      device to determine if and when there is a need
+    *                      to adjust the queue depth on the device.
+    * @sdev:  pointer to SCSI device instance
+    * @depth: Current number of outstanding SCSI commands on this device,
+    *         not counting the one returned as QUEUE_FULL.
+    *
+    *      Returns 0  - no change needed
+    *              >0 - adjust queue depth to this new depth
+    *              -1 - drop back to untagged operation using host->cmd_per_lun
+    *                   as the untagged command depth
+    *
+    *      Might block: no
+    *
+    *      Notes: LLDs may call this at any time and we will do "The Right
+    *              Thing"; interrupt context safe.
+    *
+    *      Defined in: drivers/scsi/scsi.c .
+    **/
+    int scsi_track_queue_full(struct scsi_device *sdev, int depth)
+
+
+    /**
+    * scsi_unblock_requests - allow further commands to be queued to given host
+    *
+    * @shost: pointer to host to unblock commands on
+    *
+    *      Returns nothing
+    *
+    *      Might block: no
+    *
+    *      Defined in: drivers/scsi/scsi_lib.c .
+    **/
+    void scsi_unblock_requests(struct Scsi_Host * shost)
+
+
+    /**
+    * scsi_unregister - unregister and free memory used by host instance
+    * @shp:        pointer to scsi host instance to unregister.
+    *
+    *      Returns nothing
+    *
+    *      Might block: no
+    *
+    *      Notes: Should not be invoked if the "hotplug initialization
+    *      model" is being used. Called internally by exit_this_scsi_driver()
+    *      in the "passive initialization model". Hence a LLD has no need to
+    *      call this function directly.
+    *
+    *      Defined in: drivers/scsi/hosts.c .
+    **/
+    void scsi_unregister(struct Scsi_Host * shp)
+
+
+
+
+Interface Functions
+===================
+Interface functions are supplied (defined) by LLDs and their function
+pointers are placed in an instance of struct scsi_host_template which
+is passed to scsi_host_alloc() [or scsi_register() / init_this_scsi_driver()].
+Some are mandatory. Interface functions should be declared static. The
+accepted convention is that driver "xyz" will declare its slave_configure()
+function as::
+
+    static int xyz_slave_configure(struct scsi_device * sdev);
+
+and so forth for all interface functions listed below.
+
+A pointer to this function should be placed in the 'slave_configure' member
+of a "struct scsi_host_template" instance. A pointer to such an instance
+should be passed to the mid level's scsi_host_alloc() [or scsi_register() /
+init_this_scsi_driver()].
+
+The interface functions are also described in the include/scsi/scsi_host.h
+file immediately above their definition point in "struct scsi_host_template".
+In some cases more detail is given in scsi_host.h than below.
+
+The interface functions are listed below in alphabetical order.
+
+Summary:
+
+  - bios_param - fetch head, sector, cylinder info for a disk
+  - eh_timed_out - notify the host that a command timer expired
+  - eh_abort_handler - abort given command
+  - eh_bus_reset_handler - issue SCSI bus reset
+  - eh_device_reset_handler - issue SCSI device reset
+  - eh_host_reset_handler - reset host (host bus adapter)
+  - info - supply information about given host
+  - ioctl - driver can respond to ioctls
+  - proc_info - supports /proc/scsi/{driver_name}/{host_no}
+  - queuecommand - queue scsi command, invoke 'done' on completion
+  - slave_alloc - prior to any commands being sent to a new device
+  - slave_configure - driver fine tuning for given device after attach
+  - slave_destroy - given device is about to be shut down
+
+
+Details::
+
+    /**
+    *      bios_param - fetch head, sector, cylinder info for a disk
+    *      @sdev: pointer to scsi device context (defined in
+    *             include/scsi/scsi_device.h)
+    *      @bdev: pointer to block device context (defined in fs.h)
+    *      @capacity:  device size (in 512 byte sectors)
+    *      @params: three element array to place output:
+    *              params[0] number of heads (max 255)
+    *              params[1] number of sectors (max 63)
+    *              params[2] number of cylinders
+    *
+    *      Return value is ignored
+    *
+    *      Locks: none
+    *
+    *      Calling context: process (sd)
+    *
+    *      Notes: an arbitrary geometry (based on READ CAPACITY) is used
+    *      if this function is not provided. The params array is
+    *      pre-initialized with made up values just in case this function
+    *      doesn't output anything.
+    *
+    *      Optionally defined in: LLD
+    **/
+	int bios_param(struct scsi_device * sdev, struct block_device *bdev,
+		    sector_t capacity, int params[3])
+
+
+    /**
+    *      eh_timed_out - The timer for the command has just fired
+    *      @scp: identifies command timing out
+    *
+    *      Returns:
+    *
+    *      EH_HANDLED:             I fixed the error, please complete the command
+    *      EH_RESET_TIMER:         I need more time, reset the timer and
+    *                              begin counting again
+    *      EH_NOT_HANDLED          Begin normal error recovery
+    *
+    *
+    *      Locks: None held
+    *
+    *      Calling context: interrupt
+    *
+    *      Notes: This is to give the LLD an opportunity to do local recovery.
+    *      This recovery is limited to determining if the outstanding command
+    *      will ever complete.  You may not abort and restart the command from
+    *      this callback.
+    *
+    *      Optionally defined in: LLD
+    **/
+	int eh_timed_out(struct scsi_cmnd * scp)
+
+
+    /**
+    *      eh_abort_handler - abort command associated with scp
+    *      @scp: identifies command to be aborted
+    *
+    *      Returns SUCCESS if command aborted else FAILED
+    *
+    *      Locks: None held
+    *
+    *      Calling context: kernel thread
+    *
+    *      Notes: If 'no_async_abort' is defined this callback
+    *  	will be invoked from scsi_eh thread. No other commands
+    *	will then be queued on current host during eh.
+    *	Otherwise it will be called whenever scsi_times_out()
+    *      is called due to a command timeout.
+    *
+    *      Optionally defined in: LLD
+    **/
+	int eh_abort_handler(struct scsi_cmnd * scp)
+
+
+    /**
+    *      eh_bus_reset_handler - issue SCSI bus reset
+    *      @scp: SCSI bus that contains this device should be reset
+    *
+    *      Returns SUCCESS if command aborted else FAILED
+    *
+    *      Locks: None held
+    *
+    *      Calling context: kernel thread
+    *
+    *      Notes: Invoked from scsi_eh thread. No other commands will be
+    *      queued on current host during eh.
+    *
+    *      Optionally defined in: LLD
+    **/
+	int eh_bus_reset_handler(struct scsi_cmnd * scp)
+
+
+    /**
+    *      eh_device_reset_handler - issue SCSI device reset
+    *      @scp: identifies SCSI device to be reset
+    *
+    *      Returns SUCCESS if command aborted else FAILED
+    *
+    *      Locks: None held
+    *
+    *      Calling context: kernel thread
+    *
+    *      Notes: Invoked from scsi_eh thread. No other commands will be
+    *      queued on current host during eh.
+    *
+    *      Optionally defined in: LLD
+    **/
+	int eh_device_reset_handler(struct scsi_cmnd * scp)
+
+
+    /**
+    *      eh_host_reset_handler - reset host (host bus adapter)
+    *      @scp: SCSI host that contains this device should be reset
+    *
+    *      Returns SUCCESS if command aborted else FAILED
+    *
+    *      Locks: None held
+    *
+    *      Calling context: kernel thread
+    *
+    *      Notes: Invoked from scsi_eh thread. No other commands will be
+    *      queued on current host during eh.
+    *      With the default eh_strategy in place, if none of the _abort_,
+    *      _device_reset_, _bus_reset_ or this eh handler function are
+    *      defined (or they all return FAILED) then the device in question
+    *      will be set offline whenever eh is invoked.
+    *
+    *      Optionally defined in: LLD
+    **/
+	int eh_host_reset_handler(struct scsi_cmnd * scp)
+
+
+    /**
+    *      info - supply information about given host: driver name plus data
+    *             to distinguish given host
+    *      @shp: host to supply information about
+    *
+    *      Return ASCII null terminated string. [This driver is assumed to
+    *      manage the memory pointed to and maintain it, typically for the
+    *      lifetime of this host.]
+    *
+    *      Locks: none
+    *
+    *      Calling context: process
+    *
+    *      Notes: Often supplies PCI or ISA information such as IO addresses
+    *      and interrupt numbers. If not supplied struct Scsi_Host::name used
+    *      instead. It is assumed the returned information fits on one line
+    *      (i.e. does not included embedded newlines).
+    *      The SCSI_IOCTL_PROBE_HOST ioctl yields the string returned by this
+    *      function (or struct Scsi_Host::name if this function is not
+    *      available).
+    *      In a similar manner, init_this_scsi_driver() outputs to the console
+    *      each host's "info" (or name) for the driver it is registering.
+    *      Also if proc_info() is not supplied, the output of this function
+    *      is used instead.
+    *
+    *      Optionally defined in: LLD
+    **/
+	const char * info(struct Scsi_Host * shp)
+
+
+    /**
+    *      ioctl - driver can respond to ioctls
+    *      @sdp: device that ioctl was issued for
+    *      @cmd: ioctl number
+    *      @arg: pointer to read or write data from. Since it points to
+    *            user space, should use appropriate kernel functions
+    *            (e.g. copy_from_user() ). In the Unix style this argument
+    *            can also be viewed as an unsigned long.
+    *
+    *      Returns negative "errno" value when there is a problem. 0 or a
+    *      positive value indicates success and is returned to the user space.
+    *
+    *      Locks: none
+    *
+    *      Calling context: process
+    *
+    *      Notes: The SCSI subsystem uses a "trickle down" ioctl model.
+    *      The user issues an ioctl() against an upper level driver
+    *      (e.g. /dev/sdc) and if the upper level driver doesn't recognize
+    *      the 'cmd' then it is passed to the SCSI mid level. If the SCSI
+    *      mid level does not recognize it, then the LLD that controls
+    *      the device receives the ioctl. According to recent Unix standards
+    *      unsupported ioctl() 'cmd' numbers should return -ENOTTY.
+    *
+    *      Optionally defined in: LLD
+    **/
+	int ioctl(struct scsi_device *sdp, int cmd, void *arg)
+
+
+    /**
+    *      proc_info - supports /proc/scsi/{driver_name}/{host_no}
+    *      @buffer: anchor point to output to (0==writeto1_read0) or fetch from
+    *               (1==writeto1_read0).
+    *      @start: where "interesting" data is written to. Ignored when
+    *              1==writeto1_read0.
+    *      @offset: offset within buffer 0==writeto1_read0 is actually
+    *               interested in. Ignored when 1==writeto1_read0 .
+    *      @length: maximum (or actual) extent of buffer
+    *      @host_no: host number of interest (struct Scsi_Host::host_no)
+    *      @writeto1_read0: 1 -> data coming from user space towards driver
+    *                            (e.g. "echo some_string > /proc/scsi/xyz/2")
+    *                       0 -> user what data from this driver
+    *                            (e.g. "cat /proc/scsi/xyz/2")
+    *
+    *      Returns length when 1==writeto1_read0. Otherwise number of chars
+    *      output to buffer past offset.
+    *
+    *      Locks: none held
+    *
+    *      Calling context: process
+    *
+    *      Notes: Driven from scsi_proc.c which interfaces to proc_fs. proc_fs
+    *      support can now be configured out of the scsi subsystem.
+    *
+    *      Optionally defined in: LLD
+    **/
+	int proc_info(char * buffer, char ** start, off_t offset,
+		    int length, int host_no, int writeto1_read0)
+
+
+    /**
+    *      queuecommand - queue scsi command, invoke scp->scsi_done on completion
+    *      @shost: pointer to the scsi host object
+    *      @scp: pointer to scsi command object
+    *
+    *      Returns 0 on success.
+    *
+    *      If there's a failure, return either:
+    *
+    *      SCSI_MLQUEUE_DEVICE_BUSY if the device queue is full, or
+    *      SCSI_MLQUEUE_HOST_BUSY if the entire host queue is full
+    *
+    *      On both of these returns, the mid-layer will requeue the I/O
+    *
+    *      - if the return is SCSI_MLQUEUE_DEVICE_BUSY, only that particular
+    *      device will be paused, and it will be unpaused when a command to
+    *      the device returns (or after a brief delay if there are no more
+    *      outstanding commands to it).  Commands to other devices continue
+    *      to be processed normally.
+    *
+    *      - if the return is SCSI_MLQUEUE_HOST_BUSY, all I/O to the host
+    *      is paused and will be unpaused when any command returns from
+    *      the host (or after a brief delay if there are no outstanding
+    *      commands to the host).
+    *
+    *      For compatibility with earlier versions of queuecommand, any
+    *      other return value is treated the same as
+    *      SCSI_MLQUEUE_HOST_BUSY.
+    *
+    *      Other types of errors that are detected immediately may be
+    *      flagged by setting scp->result to an appropriate value,
+    *      invoking the scp->scsi_done callback, and then returning 0
+    *      from this function. If the command is not performed
+    *      immediately (and the LLD is starting (or will start) the given
+    *      command) then this function should place 0 in scp->result and
+    *      return 0.
+    *
+    *      Command ownership.  If the driver returns zero, it owns the
+    *      command and must take responsibility for ensuring the
+    *      scp->scsi_done callback is executed.  Note: the driver may
+    *      call scp->scsi_done before returning zero, but after it has
+    *      called scp->scsi_done, it may not return any value other than
+    *      zero.  If the driver makes a non-zero return, it must not
+    *      execute the command's scsi_done callback at any time.
+    *
+    *      Locks: up to and including 2.6.36, struct Scsi_Host::host_lock
+    *             held on entry (with "irqsave") and is expected to be
+    *             held on return. From 2.6.37 onwards, queuecommand is
+    *             called without any locks held.
+    *
+    *      Calling context: in interrupt (soft irq) or process context
+    *
+    *      Notes: This function should be relatively fast. Normally it
+    *      will not wait for IO to complete. Hence the scp->scsi_done
+    *      callback is invoked (often directly from an interrupt service
+    *      routine) some time after this function has returned. In some
+    *      cases (e.g. pseudo adapter drivers that manufacture the
+    *      response to a SCSI INQUIRY) the scp->scsi_done callback may be
+    *      invoked before this function returns.  If the scp->scsi_done
+    *      callback is not invoked within a certain period the SCSI mid
+    *      level will commence error processing.  If a status of CHECK
+    *      CONDITION is placed in "result" when the scp->scsi_done
+    *      callback is invoked, then the LLD driver should perform
+    *      autosense and fill in the struct scsi_cmnd::sense_buffer
+    *      array. The scsi_cmnd::sense_buffer array is zeroed prior to
+    *      the mid level queuing a command to an LLD.
+    *
+    *      Defined in: LLD
+    **/
+	int queuecommand(struct Scsi_Host *shost, struct scsi_cmnd * scp)
+
+
+    /**
+    *      slave_alloc -   prior to any commands being sent to a new device
+    *                      (i.e. just prior to scan) this call is made
+    *      @sdp: pointer to new device (about to be scanned)
+    *
+    *      Returns 0 if ok. Any other return is assumed to be an error and
+    *      the device is ignored.
+    *
+    *      Locks: none
+    *
+    *      Calling context: process
+    *
+    *      Notes: Allows the driver to allocate any resources for a device
+    *      prior to its initial scan. The corresponding scsi device may not
+    *      exist but the mid level is just about to scan for it (i.e. send
+    *      and INQUIRY command plus ...). If a device is found then
+    *      slave_configure() will be called while if a device is not found
+    *      slave_destroy() is called.
+    *      For more details see the include/scsi/scsi_host.h file.
+    *
+    *      Optionally defined in: LLD
+    **/
+	int slave_alloc(struct scsi_device *sdp)
+
+
+    /**
+    *      slave_configure - driver fine tuning for given device just after it
+    *                     has been first scanned (i.e. it responded to an
+    *                     INQUIRY)
+    *      @sdp: device that has just been attached
+    *
+    *      Returns 0 if ok. Any other return is assumed to be an error and
+    *      the device is taken offline. [offline devices will _not_ have
+    *      slave_destroy() called on them so clean up resources.]
+    *
+    *      Locks: none
+    *
+    *      Calling context: process
+    *
+    *      Notes: Allows the driver to inspect the response to the initial
+    *      INQUIRY done by the scanning code and take appropriate action.
+    *      For more details see the include/scsi/scsi_host.h file.
+    *
+    *      Optionally defined in: LLD
+    **/
+	int slave_configure(struct scsi_device *sdp)
+
+
+    /**
+    *      slave_destroy - given device is about to be shut down. All
+    *                      activity has ceased on this device.
+    *      @sdp: device that is about to be shut down
+    *
+    *      Returns nothing
+    *
+    *      Locks: none
+    *
+    *      Calling context: process
+    *
+    *      Notes: Mid level structures for given device are still in place
+    *      but are about to be torn down. Any per device resources allocated
+    *      by this driver for given device should be freed now. No further
+    *      commands will be sent for this sdp instance. [However the device
+    *      could be re-attached in the future in which case a new instance
+    *      of struct scsi_device would be supplied by future slave_alloc()
+    *      and slave_configure() calls.]
+    *
+    *      Optionally defined in: LLD
+    **/
+	void slave_destroy(struct scsi_device *sdp)
+
+
+
+Data Structures
+===============
+struct scsi_host_template
+-------------------------
+There is one "struct scsi_host_template" instance per LLD [#]_. It is
+typically initialized as a file scope static in a driver's header file. That
+way members that are not explicitly initialized will be set to 0 or NULL.
+Member of interest:
+
+    name
+		 - name of driver (may contain spaces, please limit to
+                   less than 80 characters)
+
+    proc_name
+		 - name used in "/proc/scsi/<proc_name>/<host_no>" and
+                   by sysfs in one of its "drivers" directories. Hence
+                   "proc_name" should only contain characters acceptable
+                   to a Unix file name.
+
+   ``(*queuecommand)()``
+		 - primary callback that the mid level uses to inject
+                   SCSI commands into an LLD.
+
+The structure is defined and commented in include/scsi/scsi_host.h
+
+.. [#] In extreme situations a single driver may have several instances
+       if it controls several different classes of hardware (e.g. an LLD
+       that handles both ISA and PCI cards and has a separate instance of
+       struct scsi_host_template for each class).
+
+struct Scsi_Host
+----------------
+There is one struct Scsi_Host instance per host (HBA) that an LLD
+controls. The struct Scsi_Host structure has many members in common
+with "struct scsi_host_template". When a new struct Scsi_Host instance
+is created (in scsi_host_alloc() in hosts.c) those common members are
+initialized from the driver's struct scsi_host_template instance. Members
+of interest:
+
+    host_no
+		 - system wide unique number that is used for identifying
+                   this host. Issued in ascending order from 0.
+    can_queue
+		 - must be greater than 0; do not send more than can_queue
+                   commands to the adapter.
+    this_id
+		 - scsi id of host (scsi initiator) or -1 if not known
+    sg_tablesize
+		 - maximum scatter gather elements allowed by host.
+                   Set this to SG_ALL or less to avoid chained SG lists.
+                   Must be at least 1.
+    max_sectors
+		 - maximum number of sectors (usually 512 bytes) allowed
+                   in a single SCSI command. The default value of 0 leads
+                   to a setting of SCSI_DEFAULT_MAX_SECTORS (defined in
+                   scsi_host.h) which is currently set to 1024. So for a
+                   disk the maximum transfer size is 512 KB when max_sectors
+                   is not defined. Note that this size may not be sufficient
+                   for disk firmware uploads.
+    cmd_per_lun
+		 - maximum number of commands that can be queued on devices
+                   controlled by the host. Overridden by LLD calls to
+                   scsi_change_queue_depth().
+    unchecked_isa_dma
+		 - 1=>only use bottom 16 MB of ram (ISA DMA addressing
+                   restriction), 0=>can use full 32 bit (or better) DMA
+                   address space
+    no_async_abort
+		 - 1=>Asynchronous aborts are not supported
+		 - 0=>Timed-out commands will be aborted asynchronously
+    hostt
+		 - pointer to driver's struct scsi_host_template from which
+                   this struct Scsi_Host instance was spawned
+    hostt->proc_name
+		 - name of LLD. This is the driver name that sysfs uses
+    transportt
+		 - pointer to driver's struct scsi_transport_template instance
+                   (if any). FC and SPI transports currently supported.
+    sh_list
+		 - a double linked list of pointers to all struct Scsi_Host
+                   instances (currently ordered by ascending host_no)
+    my_devices
+		 - a double linked list of pointers to struct scsi_device
+                   instances that belong to this host.
+    hostdata[0]
+		 - area reserved for LLD at end of struct Scsi_Host. Size
+                   is set by the second argument (named 'xtr_bytes') to
+                   scsi_host_alloc() or scsi_register().
+    vendor_id
+		 - a unique value that identifies the vendor supplying
+                   the LLD for the Scsi_Host.  Used most often in validating
+                   vendor-specific message requests.  Value consists of an
+                   identifier type and a vendor-specific value.
+                   See scsi_netlink.h for a description of valid formats.
+
+The scsi_host structure is defined in include/scsi/scsi_host.h
+
+struct scsi_device
+------------------
+Generally, there is one instance of this structure for each SCSI logical unit
+on a host. Scsi devices connected to a host are uniquely identified by a
+channel number, target id and logical unit number (lun).
+The structure is defined in include/scsi/scsi_device.h
+
+struct scsi_cmnd
+----------------
+Instances of this structure convey SCSI commands to the LLD and responses
+back to the mid level. The SCSI mid level will ensure that no more SCSI
+commands become queued against the LLD than are indicated by
+scsi_change_queue_depth() (or struct Scsi_Host::cmd_per_lun). There will
+be at least one instance of struct scsi_cmnd available for each SCSI device.
+Members of interest:
+
+    cmnd
+		 - array containing SCSI command
+    cmnd_len
+		 - length (in bytes) of SCSI command
+    sc_data_direction
+		 - direction of data transfer in data phase. See
+                   "enum dma_data_direction" in include/linux/dma-mapping.h
+    request_bufflen
+		 - number of data bytes to transfer (0 if no data phase)
+    use_sg
+		 - ==0 -> no scatter gather list, hence transfer data
+                          to/from request_buffer
+                 - >0 ->  scatter gather list (actually an array) in
+                          request_buffer with use_sg elements
+    request_buffer
+		   - either contains data buffer or scatter gather list
+                     depending on the setting of use_sg. Scatter gather
+                     elements are defined by 'struct scatterlist' found
+                     in include/linux/scatterlist.h .
+    done
+		 - function pointer that should be invoked by LLD when the
+                   SCSI command is completed (successfully or otherwise).
+                   Should only be called by an LLD if the LLD has accepted
+                   the command (i.e. queuecommand() returned or will return
+                   0). The LLD may invoke 'done'  prior to queuecommand()
+                   finishing.
+    result
+		 - should be set by LLD prior to calling 'done'. A value
+                   of 0 implies a successfully completed command (and all
+                   data (if any) has been transferred to or from the SCSI
+                   target device). 'result' is a 32 bit unsigned integer that
+                   can be viewed as 4 related bytes. The SCSI status value is
+                   in the LSB. See include/scsi/scsi.h status_byte(),
+                   msg_byte(), host_byte() and driver_byte() macros and
+                   related constants.
+    sense_buffer
+		 - an array (maximum size: SCSI_SENSE_BUFFERSIZE bytes) that
+                   should be written when the SCSI status (LSB of 'result')
+                   is set to CHECK_CONDITION (2). When CHECK_CONDITION is
+                   set, if the top nibble of sense_buffer[0] has the value 7
+                   then the mid level will assume the sense_buffer array
+                   contains a valid SCSI sense buffer; otherwise the mid
+                   level will issue a REQUEST_SENSE SCSI command to
+                   retrieve the sense buffer. The latter strategy is error
+                   prone in the presence of command queuing so the LLD should
+                   always "auto-sense".
+    device
+		 - pointer to scsi_device object that this command is
+                   associated with.
+    resid
+		 - an LLD should set this signed integer to the requested
+                   transfer length (i.e. 'request_bufflen') less the number
+                   of bytes that are actually transferred. 'resid' is
+                   preset to 0 so an LLD can ignore it if it cannot detect
+                   underruns (overruns should be rare). If possible an LLD
+                   should set 'resid' prior to invoking 'done'. The most
+                   interesting case is data transfers from a SCSI target
+                   device (e.g. READs) that underrun.
+    underflow
+		 - LLD should place (DID_ERROR << 16) in 'result' if
+                   actual number of bytes transferred is less than this
+                   figure. Not many LLDs implement this check and some that
+                   do just output an error message to the log rather than
+                   report a DID_ERROR. Better for an LLD to implement
+                   'resid'.
+
+It is recommended that a LLD set 'resid' on data transfers from a SCSI
+target device (e.g. READs). It is especially important that 'resid' is set
+when such data transfers have sense keys of MEDIUM ERROR and HARDWARE ERROR
+(and possibly RECOVERED ERROR). In these cases if a LLD is in doubt how much
+data has been received then the safest approach is to indicate no bytes have
+been received. For example: to indicate that no valid data has been received
+a LLD might use these helpers::
+
+    scsi_set_resid(SCpnt, scsi_bufflen(SCpnt));
+
+where 'SCpnt' is a pointer to a scsi_cmnd object. To indicate only three 512
+bytes blocks has been received 'resid' could be set like this::
+
+    scsi_set_resid(SCpnt, scsi_bufflen(SCpnt) - (3 * 512));
+
+The scsi_cmnd structure is defined in include/scsi/scsi_cmnd.h
+
+
+Locks
+=====
+Each struct Scsi_Host instance has a spin_lock called struct
+Scsi_Host::default_lock which is initialized in scsi_host_alloc() [found in
+hosts.c]. Within the same function the struct Scsi_Host::host_lock pointer
+is initialized to point at default_lock.  Thereafter lock and unlock
+operations performed by the mid level use the struct Scsi_Host::host_lock
+pointer.  Previously drivers could override the host_lock pointer but
+this is not allowed anymore.
+
+
+Autosense
+=========
+Autosense (or auto-sense) is defined in the SAM-2 document as "the
+automatic return of sense data to the application client coincident
+with the completion of a SCSI command" when a status of CHECK CONDITION
+occurs. LLDs should perform autosense. This should be done when the LLD
+detects a CHECK CONDITION status by either:
+
+    a) instructing the SCSI protocol (e.g. SCSI Parallel Interface (SPI))
+       to perform an extra data in phase on such responses
+    b) or, the LLD issuing a REQUEST SENSE command itself
+
+Either way, when a status of CHECK CONDITION is detected, the mid level
+decides whether the LLD has performed autosense by checking struct
+scsi_cmnd::sense_buffer[0] . If this byte has an upper nibble of 7 (or 0xf)
+then autosense is assumed to have taken place. If it has another value (and
+this byte is initialized to 0 before each command) then the mid level will
+issue a REQUEST SENSE command.
+
+In the presence of queued commands the "nexus" that maintains sense
+buffer data from the command that failed until a following REQUEST SENSE
+may get out of synchronization. This is why it is best for the LLD
+to perform autosense.
+
+
+Changes since lk 2.4 series
+===========================
+io_request_lock has been replaced by several finer grained locks. The lock
+relevant to LLDs is struct Scsi_Host::host_lock and there is
+one per SCSI host.
+
+The older error handling mechanism has been removed. This means the
+LLD interface functions abort() and reset() have been removed.
+The struct scsi_host_template::use_new_eh_code flag has been removed.
+
+In the 2.4 series the SCSI subsystem configuration descriptions were
+aggregated with the configuration descriptions from all other Linux
+subsystems in the Documentation/Configure.help file. In the 2.6 series,
+the SCSI subsystem now has its own (much smaller) drivers/scsi/Kconfig
+file that contains both configuration and help information.
+
+struct SHT has been renamed to struct scsi_host_template.
+
+Addition of the "hotplug initialization model" and many extra functions
+to support it.
+
+
+Credits
+=======
+The following people have contributed to this document:
+
+	- Mike Anderson <andmike at us dot ibm dot com>
+	- James Bottomley <James dot Bottomley at hansenpartnership dot com>
+	- Patrick Mansfield <patmans at us dot ibm dot com>
+	- Christoph Hellwig <hch at infradead dot org>
+	- Doug Ledford <dledford at redhat dot com>
+	- Andries Brouwer <Andries dot Brouwer at cwi dot nl>
+	- Randy Dunlap <rdunlap at xenotime dot net>
+	- Alan Stern <stern at rowland dot harvard dot edu>
+
+
+Douglas Gilbert
+dgilbert at interlog dot com
+
+21st September 2004
diff --git a/Documentation/scsi/scsi_mid_low_api.txt b/Documentation/scsi/scsi_mid_low_api.txt
deleted file mode 100644
index 537f047..0000000
--- a/Documentation/scsi/scsi_mid_low_api.txt
+++ /dev/null
@@ -1,1259 +0,0 @@
-                          Linux Kernel 2.6 series
-                 SCSI mid_level - lower_level driver interface
-                 =============================================
-
-Introduction
-============
-This document outlines the interface between the Linux SCSI mid level and
-SCSI lower level drivers. Lower level drivers (LLDs) are variously called 
-host bus adapter (HBA) drivers and host drivers (HD). A "host" in this
-context is a bridge between a computer IO bus (e.g. PCI or ISA) and a
-single SCSI initiator port on a SCSI transport. An "initiator" port
-(SCSI terminology, see SAM-3 at http://www.t10.org) sends SCSI commands
-to "target" SCSI ports (e.g. disks). There can be many LLDs in a running
-system, but only one per hardware type. Most LLDs can control one or more
-SCSI HBAs. Some HBAs contain multiple hosts.
-
-In some cases the SCSI transport is an external bus that already has
-its own subsystem in Linux (e.g. USB and ieee1394). In such cases the
-SCSI subsystem LLD is a software bridge to the other driver subsystem.
-Examples are the usb-storage driver (found in the drivers/usb/storage
-directory) and the ieee1394/sbp2 driver (found in the drivers/ieee1394
-directory).
-
-For example, the aic7xxx LLD controls Adaptec SCSI parallel interface
-(SPI) controllers based on that company's 7xxx chip series. The aic7xxx
-LLD can be built into the kernel or loaded as a module. There can only be
-one aic7xxx LLD running in a Linux system but it may be controlling many 
-HBAs. These HBAs might be either on PCI daughter-boards or built into 
-the motherboard (or both). Some aic7xxx based HBAs are dual controllers
-and thus represent two hosts. Like most modern HBAs, each aic7xxx host
-has its own PCI device address. [The one-to-one correspondence between
-a SCSI host and a PCI device is common but not required (e.g. with
-ISA adapters).]
-
-The SCSI mid level isolates an LLD from other layers such as the SCSI
-upper layer drivers and the block layer.
-
-This version of the document roughly matches linux kernel version 2.6.8 .
-
-Documentation
-=============
-There is a SCSI documentation directory within the kernel source tree, 
-typically Documentation/scsi . Most documents are in plain
-(i.e. ASCII) text. This file is named scsi_mid_low_api.txt and can be 
-found in that directory. A more recent copy of this document may be found
-at http://web.archive.org/web/20070107183357rn_1/sg.torque.net/scsi/. 
-Many LLDs are documented there (e.g. aic7xxx.txt). The SCSI mid-level is
-briefly described in scsi.txt which contains a url to a document 
-describing the SCSI subsystem in the lk 2.4 series. Two upper level 
-drivers have documents in that directory: st.txt (SCSI tape driver) and 
-scsi-generic.txt (for the sg driver).
-
-Some documentation (or urls) for LLDs may be found in the C source code
-or in the same directory as the C source code. For example to find a url
-about the USB mass storage driver see the 
-/usr/src/linux/drivers/usb/storage directory.
-
-Driver structure
-================
-Traditionally an LLD for the SCSI subsystem has been at least two files in
-the drivers/scsi directory. For example, a driver called "xyz" has a header
-file "xyz.h" and a source file "xyz.c". [Actually there is no good reason
-why this couldn't all be in one file; the header file is superfluous.] Some
-drivers that have been ported to several operating systems have more than
-two files. For example the aic7xxx driver has separate files for generic 
-and OS-specific code (e.g. FreeBSD and Linux). Such drivers tend to have
-their own directory under the drivers/scsi directory.
-
-When a new LLD is being added to Linux, the following files (found in the
-drivers/scsi directory) will need some attention: Makefile and Kconfig .
-It is probably best to study how existing LLDs are organized.
-
-As the 2.5 series development kernels evolve into the 2.6 series
-production series, changes are being introduced into this interface. An
-example of this is driver initialization code where there are now 2 models
-available. The older one, similar to what was found in the lk 2.4 series,
-is based on hosts that are detected at HBA driver load time. This will be
-referred to the "passive" initialization model. The newer model allows HBAs
-to be hot plugged (and unplugged) during the lifetime of the LLD and will
-be referred to as the "hotplug" initialization model. The newer model is
-preferred as it can handle both traditional SCSI equipment that is
-permanently connected as well as modern "SCSI" devices (e.g. USB or
-IEEE 1394 connected digital cameras) that are hotplugged. Both 
-initialization models are discussed in the following sections.
-
-An LLD interfaces to the SCSI subsystem several ways:
-  a) directly invoking functions supplied by the mid level
-  b) passing a set of function pointers to a registration function
-     supplied by the mid level. The mid level will then invoke these
-     functions at some point in the future. The LLD will supply
-     implementations of these functions.
-  c) direct access to instances of well known data structures maintained
-     by the mid level
-
-Those functions in group a) are listed in a section entitled "Mid level
-supplied functions" below.
-
-Those functions in group b) are listed in a section entitled "Interface
-functions" below. Their function pointers are placed in the members of
-"struct scsi_host_template", an instance of which is passed to
-scsi_host_alloc() ** .  Those interface functions that the LLD does not 
-wish to supply should have NULL placed in the corresponding member of 
-struct scsi_host_template.  Defining an instance of struct 
-scsi_host_template at file scope will cause NULL to be  placed in function
- pointer members not explicitly initialized.
-
-Those usages in group c) should be handled with care, especially in a
-"hotplug" environment. LLDs should be aware of the lifetime of instances
-that are shared with the mid level and other layers.
-
-All functions defined within an LLD and all data defined at file scope
-should be static. For example the slave_alloc() function in an LLD
-called "xxx" could be defined as 
-"static int xxx_slave_alloc(struct scsi_device * sdev) { /* code */ }"
-
-** the scsi_host_alloc() function is a replacement for the rather vaguely
-named scsi_register() function in most situations.
-
-
-Hotplug initialization model
-============================
-In this model an LLD controls when SCSI hosts are introduced and removed
-from the SCSI subsystem. Hosts can be introduced as early as driver
-initialization and removed as late as driver shutdown. Typically a driver
-will respond to a sysfs probe() callback that indicates an HBA has been
-detected. After confirming that the new device is one that the LLD wants
-to control, the LLD will initialize the HBA and then register a new host
-with the SCSI mid level.
-
-During LLD initialization the driver should register itself with the
-appropriate IO bus on which it expects to find HBA(s) (e.g. the PCI bus).
-This can probably be done via sysfs. Any driver parameters (especially
-those that are writable after the driver is loaded) could also be
-registered with sysfs at this point. The SCSI mid level first becomes
-aware of an LLD when that LLD registers its first HBA.
-
-At some later time, the LLD becomes aware of an HBA and what follows
-is a typical sequence of calls between the LLD and the mid level.
-This example shows the mid level scanning the newly introduced HBA for 3 
-scsi devices of which only the first 2 respond:
-
-     HBA PROBE: assume 2 SCSI devices found in scan
-LLD                   mid level                    LLD
-===-------------------=========--------------------===------
-scsi_host_alloc()  -->
-scsi_add_host()  ---->
-scsi_scan_host()  -------+
-                         |
-                    slave_alloc()
-                    slave_configure() -->  scsi_change_queue_depth()
-                         |
-                    slave_alloc()
-                    slave_configure()
-                         |
-                    slave_alloc()   ***
-                    slave_destroy() ***
-------------------------------------------------------------
-
-If the LLD wants to adjust the default queue settings, it can invoke
-scsi_change_queue_depth() in its slave_configure() routine.
-
-*** For scsi devices that the mid level tries to scan but do not
-    respond, a slave_alloc(), slave_destroy() pair is called.
-
-When an HBA is being removed it could be as part of an orderly shutdown
-associated with the LLD module being unloaded (e.g. with the "rmmod"
-command) or in response to a "hot unplug" indicated by sysfs()'s
-remove() callback being invoked. In either case, the sequence is the
-same:
-
-        HBA REMOVE: assume 2 SCSI devices attached
-LLD                      mid level                 LLD
-===----------------------=========-----------------===------
-scsi_remove_host() ---------+
-                            |
-                     slave_destroy()
-                     slave_destroy()
-scsi_host_put()
-------------------------------------------------------------
-                     
-It may be useful for a LLD to keep track of struct Scsi_Host instances
-(a pointer is returned by scsi_host_alloc()). Such instances are "owned"
-by the mid-level.  struct Scsi_Host instances are freed from
-scsi_host_put() when the reference count hits zero.
-
-Hot unplugging an HBA that controls a disk which is processing SCSI
-commands on a mounted file system is an interesting situation. Reference
-counting logic is being introduced into the mid level to cope with many
-of the issues involved. See the section on reference counting below.
-
-
-The hotplug concept may be extended to SCSI devices. Currently, when an
-HBA is added, the scsi_scan_host() function causes a scan for SCSI devices
-attached to the HBA's SCSI transport. On newer SCSI transports the HBA
-may become aware of a new SCSI device _after_ the scan has completed.
-An LLD can use this sequence to make the mid level aware of a SCSI device:
-
-                 SCSI DEVICE hotplug
-LLD                   mid level                    LLD
-===-------------------=========--------------------===------
-scsi_add_device()  ------+
-                         |
-                    slave_alloc()
-                    slave_configure()   [--> scsi_change_queue_depth()]
-------------------------------------------------------------
-
-In a similar fashion, an LLD may become aware that a SCSI device has been
-removed (unplugged) or the connection to it has been interrupted. Some
-existing SCSI transports (e.g. SPI) may not become aware that a SCSI
-device has been removed until a subsequent SCSI command fails which will
-probably cause that device to be set offline by the mid level. An LLD that
-detects the removal of a SCSI device can instigate its removal from
-upper layers with this sequence:
-
-                  SCSI DEVICE hot unplug
-LLD                      mid level                 LLD
-===----------------------=========-----------------===------
-scsi_remove_device() -------+
-                            |
-                     slave_destroy()
-------------------------------------------------------------
-
-It may be useful for an LLD to keep track of struct scsi_device instances
-(a pointer is passed as the parameter to slave_alloc() and
-slave_configure() callbacks). Such instances are "owned" by the mid-level.
-struct scsi_device instances are freed after slave_destroy().
-
-
-Reference Counting
-==================
-The Scsi_Host structure has had reference counting infrastructure added.
-This effectively spreads the ownership of struct Scsi_Host instances
-across the various SCSI layers which use them. Previously such instances
-were exclusively owned by the mid level. LLDs would not usually need to
-directly manipulate these reference counts but there may be some cases
-where they do.
-
-There are 3 reference counting functions of interest associated with
-struct Scsi_Host:
-  - scsi_host_alloc(): returns a pointer to new instance of struct 
-        Scsi_Host which has its reference count ^^ set to 1
-  - scsi_host_get(): adds 1 to the reference count of the given instance
-  - scsi_host_put(): decrements 1 from the reference count of the given
-        instance. If the reference count reaches 0 then the given instance
-        is freed
-
-The scsi_device structure has had reference counting infrastructure added.
-This effectively spreads the ownership of struct scsi_device instances
-across the various SCSI layers which use them. Previously such instances
-were exclusively owned by the mid level. See the access functions declared
-towards the end of include/scsi/scsi_device.h . If an LLD wants to keep
-a copy of a pointer to a scsi_device instance it should use scsi_device_get()
-to bump its reference count. When it is finished with the pointer it can
-use scsi_device_put() to decrement its reference count (and potentially
-delete it).
-
-^^ struct Scsi_Host actually has 2 reference counts which are manipulated
-in parallel by these functions.
-
-
-Conventions
-===========
-First, Linus Torvalds's thoughts on C coding style can be found in the
-Documentation/process/coding-style.rst file.
-
-Next, there is a movement to "outlaw" typedefs introducing synonyms for 
-struct tags. Both can be still found in the SCSI subsystem, but
-the typedefs have been moved to a single file, scsi_typedefs.h to
-make their future removal easier, for example: 
-"typedef struct scsi_cmnd Scsi_Cmnd;"
-
-Also, most C99 enhancements are encouraged to the extent they are supported
-by the relevant gcc compilers. So C99 style structure and array
-initializers are encouraged where appropriate. Don't go too far,
-VLAs are not properly supported yet.  An exception to this is the use of
-"//" style comments; /*...*/ comments are still preferred in Linux.
-
-Well written, tested and documented code, need not be re-formatted to
-comply with the above conventions. For example, the aic7xxx driver
-comes to Linux from FreeBSD and Adaptec's own labs. No doubt FreeBSD
-and Adaptec have their own coding conventions.
-
-
-Mid level supplied functions
-============================
-These functions are supplied by the SCSI mid level for use by LLDs.
-The names (i.e. entry points) of these functions are exported 
-so an LLD that is a module can access them. The kernel will
-arrange for the SCSI mid level to be loaded and initialized before any LLD
-is initialized. The functions below are listed alphabetically and their
-names all start with "scsi_".
-
-Summary:
-   scsi_add_device - creates new scsi device (lu) instance
-   scsi_add_host - perform sysfs registration and set up transport class
-   scsi_change_queue_depth - change the queue depth on a SCSI device
-   scsi_bios_ptable - return copy of block device's partition table
-   scsi_block_requests - prevent further commands being queued to given host
-   scsi_host_alloc - return a new scsi_host instance whose refcount==1
-   scsi_host_get - increments Scsi_Host instance's refcount
-   scsi_host_put - decrements Scsi_Host instance's refcount (free if 0)
-   scsi_register - create and register a scsi host adapter instance.
-   scsi_remove_device - detach and remove a SCSI device
-   scsi_remove_host - detach and remove all SCSI devices owned by host
-   scsi_report_bus_reset - report scsi _bus_ reset observed
-   scsi_scan_host - scan SCSI bus
-   scsi_track_queue_full - track successive QUEUE_FULL events 
-   scsi_unblock_requests - allow further commands to be queued to given host
-   scsi_unregister - [calls scsi_host_put()]
-
-
-Details:
-
-/**
- * scsi_add_device - creates new scsi device (lu) instance
- * @shost:   pointer to scsi host instance
- * @channel: channel number (rarely other than 0)
- * @id:      target id number
- * @lun:     logical unit number
- *
- *      Returns pointer to new struct scsi_device instance or 
- *      ERR_PTR(-ENODEV) (or some other bent pointer) if something is
- *      wrong (e.g. no lu responds at given address)
- *
- *      Might block: yes
- *
- *      Notes: This call is usually performed internally during a scsi
- *      bus scan when an HBA is added (i.e. scsi_scan_host()). So it
- *      should only be called if the HBA becomes aware of a new scsi
- *      device (lu) after scsi_scan_host() has completed. If successful
- *      this call can lead to slave_alloc() and slave_configure() callbacks
- *      into the LLD.
- *
- *      Defined in: drivers/scsi/scsi_scan.c
- **/
-struct scsi_device * scsi_add_device(struct Scsi_Host *shost, 
-                                     unsigned int channel,
-                                     unsigned int id, unsigned int lun)
-
-
-/**
- * scsi_add_host - perform sysfs registration and set up transport class
- * @shost:   pointer to scsi host instance
- * @dev:     pointer to struct device of type scsi class
- *
- *      Returns 0 on success, negative errno of failure (e.g. -ENOMEM)
- *
- *      Might block: no
- *
- *      Notes: Only required in "hotplug initialization model" after a
- *      successful call to scsi_host_alloc().  This function does not
- *	scan the bus; this can be done by calling scsi_scan_host() or
- *	in some other transport-specific way.  The LLD must set up
- *	the transport template before calling this function and may only
- *	access the transport class data after this function has been called.
- *
- *      Defined in: drivers/scsi/hosts.c
- **/
-int scsi_add_host(struct Scsi_Host *shost, struct device * dev)
-
-
-/**
- * scsi_change_queue_depth - allow LLD to change queue depth on a SCSI device
- * @sdev:       pointer to SCSI device to change queue depth on
- * @tags        Number of tags allowed if tagged queuing enabled,
- *              or number of commands the LLD can queue up
- *              in non-tagged mode (as per cmd_per_lun).
- *
- *      Returns nothing
- *
- *      Might block: no
- *
- *      Notes: Can be invoked any time on a SCSI device controlled by this
- *      LLD. [Specifically during and after slave_configure() and prior to
- *      slave_destroy().] Can safely be invoked from interrupt code.
- *
- *      Defined in: drivers/scsi/scsi.c [see source code for more notes]
- *
- **/
-int scsi_change_queue_depth(struct scsi_device *sdev, int tags)
-
-
-/**
- * scsi_bios_ptable - return copy of block device's partition table
- * @dev:        pointer to block device
- *
- *      Returns pointer to partition table, or NULL for failure
- *
- *      Might block: yes
- *
- *      Notes: Caller owns memory returned (free with kfree() )
- *
- *      Defined in: drivers/scsi/scsicam.c
- **/
-unsigned char *scsi_bios_ptable(struct block_device *dev)
-
-
-/**
- * scsi_block_requests - prevent further commands being queued to given host
- *
- * @shost: pointer to host to block commands on
- *
- *      Returns nothing
- *
- *      Might block: no
- *
- *      Notes: There is no timer nor any other means by which the requests
- *      get unblocked other than the LLD calling scsi_unblock_requests().
- *
- *      Defined in: drivers/scsi/scsi_lib.c
-**/
-void scsi_block_requests(struct Scsi_Host * shost)
-
-
-/**
- * scsi_host_alloc - create a scsi host adapter instance and perform basic
- *                   initialization.
- * @sht:        pointer to scsi host template
- * @privsize:   extra bytes to allocate in hostdata array (which is the
- *              last member of the returned Scsi_Host instance)
- *
- *      Returns pointer to new Scsi_Host instance or NULL on failure
- *
- *      Might block: yes
- *
- *      Notes: When this call returns to the LLD, the SCSI bus scan on
- *      this host has _not_ yet been done.
- *      The hostdata array (by default zero length) is a per host scratch 
- *      area for the LLD's exclusive use.
- *      Both associated refcounting objects have their refcount set to 1.
- *      Full registration (in sysfs) and a bus scan are performed later when
- *      scsi_add_host() and scsi_scan_host() are called.
- *
- *      Defined in: drivers/scsi/hosts.c .
- **/
-struct Scsi_Host * scsi_host_alloc(struct scsi_host_template * sht,
-                                   int privsize)
-
-
-/**
- * scsi_host_get - increment Scsi_Host instance refcount
- * @shost:   pointer to struct Scsi_Host instance
- *
- *      Returns nothing
- *
- *      Might block: currently may block but may be changed to not block
- *
- *      Notes: Actually increments the counts in two sub-objects
- *
- *      Defined in: drivers/scsi/hosts.c
- **/
-void scsi_host_get(struct Scsi_Host *shost)
-
-
-/**
- * scsi_host_put - decrement Scsi_Host instance refcount, free if 0
- * @shost:   pointer to struct Scsi_Host instance
- *
- *      Returns nothing
- *
- *      Might block: currently may block but may be changed to not block
- *
- *      Notes: Actually decrements the counts in two sub-objects. If the
- *      latter refcount reaches 0, the Scsi_Host instance is freed.
- *      The LLD need not worry exactly when the Scsi_Host instance is
- *      freed, it just shouldn't access the instance after it has balanced
- *      out its refcount usage.
- *
- *      Defined in: drivers/scsi/hosts.c
- **/
-void scsi_host_put(struct Scsi_Host *shost)
-
-
-/**
- * scsi_register - create and register a scsi host adapter instance.
- * @sht:        pointer to scsi host template
- * @privsize:   extra bytes to allocate in hostdata array (which is the
- *              last member of the returned Scsi_Host instance)
- *
- *      Returns pointer to new Scsi_Host instance or NULL on failure
- *
- *      Might block: yes
- *
- *      Notes: When this call returns to the LLD, the SCSI bus scan on
- *      this host has _not_ yet been done.
- *      The hostdata array (by default zero length) is a per host scratch 
- *      area for the LLD.
- *
- *      Defined in: drivers/scsi/hosts.c .
- **/
-struct Scsi_Host * scsi_register(struct scsi_host_template * sht,
-                                 int privsize)
-
-
-/**
- * scsi_remove_device - detach and remove a SCSI device
- * @sdev:      a pointer to a scsi device instance
- *
- *      Returns value: 0 on success, -EINVAL if device not attached
- *
- *      Might block: yes
- *
- *      Notes: If an LLD becomes aware that a scsi device (lu) has
- *      been removed but its host is still present then it can request
- *      the removal of that scsi device. If successful this call will
- *      lead to the slave_destroy() callback being invoked. sdev is an 
- *      invalid pointer after this call.
- *
- *      Defined in: drivers/scsi/scsi_sysfs.c .
- **/
-int scsi_remove_device(struct scsi_device *sdev)
-
-
-/**
- * scsi_remove_host - detach and remove all SCSI devices owned by host
- * @shost:      a pointer to a scsi host instance
- *
- *      Returns value: 0 on success, 1 on failure (e.g. LLD busy ??)
- *
- *      Might block: yes
- *
- *      Notes: Should only be invoked if the "hotplug initialization
- *      model" is being used. It should be called _prior_ to  
- *      scsi_unregister().
- *
- *      Defined in: drivers/scsi/hosts.c .
- **/
-int scsi_remove_host(struct Scsi_Host *shost)
-
-
-/**
- * scsi_report_bus_reset - report scsi _bus_ reset observed
- * @shost: a pointer to a scsi host involved
- * @channel: channel (within) host on which scsi bus reset occurred
- *
- *      Returns nothing
- *
- *      Might block: no
- *
- *      Notes: This only needs to be called if the reset is one which
- *      originates from an unknown location.  Resets originated by the 
- *      mid level itself don't need to call this, but there should be 
- *      no harm.  The main purpose of this is to make sure that a
- *      CHECK_CONDITION is properly treated.
- *
- *      Defined in: drivers/scsi/scsi_error.c .
- **/
-void scsi_report_bus_reset(struct Scsi_Host * shost, int channel)
-
-
-/**
- * scsi_scan_host - scan SCSI bus
- * @shost: a pointer to a scsi host instance
- *
- *	Might block: yes
- *
- *	Notes: Should be called after scsi_add_host()
- *
- *	Defined in: drivers/scsi/scsi_scan.c
- **/
-void scsi_scan_host(struct Scsi_Host *shost)
-
-
-/**
- * scsi_track_queue_full - track successive QUEUE_FULL events on given
- *                      device to determine if and when there is a need
- *                      to adjust the queue depth on the device.
- * @sdev:  pointer to SCSI device instance
- * @depth: Current number of outstanding SCSI commands on this device,
- *         not counting the one returned as QUEUE_FULL.
- *
- *      Returns 0  - no change needed
- *              >0 - adjust queue depth to this new depth
- *              -1 - drop back to untagged operation using host->cmd_per_lun
- *                   as the untagged command depth
- *
- *      Might block: no
- *
- *      Notes: LLDs may call this at any time and we will do "The Right
- *              Thing"; interrupt context safe. 
- *
- *      Defined in: drivers/scsi/scsi.c .
- **/
-int scsi_track_queue_full(struct scsi_device *sdev, int depth)
-
-
-/**
- * scsi_unblock_requests - allow further commands to be queued to given host
- *
- * @shost: pointer to host to unblock commands on
- *
- *      Returns nothing
- *
- *      Might block: no
- *
- *      Defined in: drivers/scsi/scsi_lib.c .
-**/
-void scsi_unblock_requests(struct Scsi_Host * shost)
-
-
-/**
- * scsi_unregister - unregister and free memory used by host instance
- * @shp:        pointer to scsi host instance to unregister.
- *
- *      Returns nothing
- *
- *      Might block: no
- *
- *      Notes: Should not be invoked if the "hotplug initialization
- *      model" is being used. Called internally by exit_this_scsi_driver()
- *      in the "passive initialization model". Hence a LLD has no need to
- *      call this function directly.
- *
- *      Defined in: drivers/scsi/hosts.c .
- **/
-void scsi_unregister(struct Scsi_Host * shp)
-
-
-
-
-Interface Functions
-===================
-Interface functions are supplied (defined) by LLDs and their function
-pointers are placed in an instance of struct scsi_host_template which
-is passed to scsi_host_alloc() [or scsi_register() / init_this_scsi_driver()].
-Some are mandatory. Interface functions should be declared static. The
-accepted convention is that driver "xyz" will declare its slave_configure() 
-function as:
-    static int xyz_slave_configure(struct scsi_device * sdev);
-and so forth for all interface functions listed below.
-
-A pointer to this function should be placed in the 'slave_configure' member
-of a "struct scsi_host_template" instance. A pointer to such an instance
-should be passed to the mid level's scsi_host_alloc() [or scsi_register() /
-init_this_scsi_driver()].
-
-The interface functions are also described in the include/scsi/scsi_host.h
-file immediately above their definition point in "struct scsi_host_template".
-In some cases more detail is given in scsi_host.h than below.
-
-The interface functions are listed below in alphabetical order.
-
-Summary:
-   bios_param - fetch head, sector, cylinder info for a disk
-   eh_timed_out - notify the host that a command timer expired
-   eh_abort_handler - abort given command
-   eh_bus_reset_handler - issue SCSI bus reset
-   eh_device_reset_handler - issue SCSI device reset
-   eh_host_reset_handler - reset host (host bus adapter)
-   info - supply information about given host
-   ioctl - driver can respond to ioctls
-   proc_info - supports /proc/scsi/{driver_name}/{host_no}
-   queuecommand - queue scsi command, invoke 'done' on completion
-   slave_alloc - prior to any commands being sent to a new device 
-   slave_configure - driver fine tuning for given device after attach
-   slave_destroy - given device is about to be shut down
-
-
-Details:
-
-/**
- *      bios_param - fetch head, sector, cylinder info for a disk
- *      @sdev: pointer to scsi device context (defined in 
- *             include/scsi/scsi_device.h)
- *      @bdev: pointer to block device context (defined in fs.h)
- *      @capacity:  device size (in 512 byte sectors)
- *      @params: three element array to place output:
- *              params[0] number of heads (max 255)
- *              params[1] number of sectors (max 63)
- *              params[2] number of cylinders 
- *
- *      Return value is ignored
- *
- *      Locks: none
- *
- *      Calling context: process (sd)
- *
- *      Notes: an arbitrary geometry (based on READ CAPACITY) is used
- *      if this function is not provided. The params array is
- *      pre-initialized with made up values just in case this function 
- *      doesn't output anything.
- *
- *      Optionally defined in: LLD
- **/
-    int bios_param(struct scsi_device * sdev, struct block_device *bdev,
-                   sector_t capacity, int params[3])
-
-
-/**
- *      eh_timed_out - The timer for the command has just fired
- *      @scp: identifies command timing out
- *
- *      Returns:
- *
- *      EH_HANDLED:             I fixed the error, please complete the command
- *      EH_RESET_TIMER:         I need more time, reset the timer and
- *                              begin counting again
- *      EH_NOT_HANDLED          Begin normal error recovery
- *
- *
- *      Locks: None held
- *
- *      Calling context: interrupt
- *
- *      Notes: This is to give the LLD an opportunity to do local recovery.
- *      This recovery is limited to determining if the outstanding command
- *      will ever complete.  You may not abort and restart the command from
- *      this callback.
- *
- *      Optionally defined in: LLD
- **/
-     int eh_timed_out(struct scsi_cmnd * scp)
-
-
-/**
- *      eh_abort_handler - abort command associated with scp
- *      @scp: identifies command to be aborted
- *
- *      Returns SUCCESS if command aborted else FAILED
- *
- *      Locks: None held
- *
- *      Calling context: kernel thread
- *
- *      Notes: If 'no_async_abort' is defined this callback
- *  	will be invoked from scsi_eh thread. No other commands
- *	will then be queued on current host during eh.
- *	Otherwise it will be called whenever scsi_times_out()
- *      is called due to a command timeout.
- *
- *      Optionally defined in: LLD
- **/
-     int eh_abort_handler(struct scsi_cmnd * scp)
-
-
-/**
- *      eh_bus_reset_handler - issue SCSI bus reset
- *      @scp: SCSI bus that contains this device should be reset
- *
- *      Returns SUCCESS if command aborted else FAILED
- *
- *      Locks: None held
- *
- *      Calling context: kernel thread
- *
- *      Notes: Invoked from scsi_eh thread. No other commands will be
- *      queued on current host during eh.
- *
- *      Optionally defined in: LLD
- **/
-     int eh_bus_reset_handler(struct scsi_cmnd * scp)
-
-
-/**
- *      eh_device_reset_handler - issue SCSI device reset
- *      @scp: identifies SCSI device to be reset
- *
- *      Returns SUCCESS if command aborted else FAILED
- *
- *      Locks: None held
- *
- *      Calling context: kernel thread
- *
- *      Notes: Invoked from scsi_eh thread. No other commands will be
- *      queued on current host during eh.
- *
- *      Optionally defined in: LLD
- **/
-     int eh_device_reset_handler(struct scsi_cmnd * scp)
-
-
-/**
- *      eh_host_reset_handler - reset host (host bus adapter)
- *      @scp: SCSI host that contains this device should be reset
- *
- *      Returns SUCCESS if command aborted else FAILED
- *
- *      Locks: None held
- *
- *      Calling context: kernel thread
- *
- *      Notes: Invoked from scsi_eh thread. No other commands will be
- *      queued on current host during eh. 
- *      With the default eh_strategy in place, if none of the _abort_, 
- *      _device_reset_, _bus_reset_ or this eh handler function are 
- *      defined (or they all return FAILED) then the device in question 
- *      will be set offline whenever eh is invoked.
- *
- *      Optionally defined in: LLD
- **/
-     int eh_host_reset_handler(struct scsi_cmnd * scp)
-
-
-/**
- *      info - supply information about given host: driver name plus data
- *             to distinguish given host
- *      @shp: host to supply information about
- *
- *      Return ASCII null terminated string. [This driver is assumed to
- *      manage the memory pointed to and maintain it, typically for the
- *      lifetime of this host.]
- *
- *      Locks: none
- *
- *      Calling context: process
- *
- *      Notes: Often supplies PCI or ISA information such as IO addresses
- *      and interrupt numbers. If not supplied struct Scsi_Host::name used
- *      instead. It is assumed the returned information fits on one line 
- *      (i.e. does not included embedded newlines).
- *      The SCSI_IOCTL_PROBE_HOST ioctl yields the string returned by this
- *      function (or struct Scsi_Host::name if this function is not
- *      available).
- *      In a similar manner, init_this_scsi_driver() outputs to the console
- *      each host's "info" (or name) for the driver it is registering.
- *      Also if proc_info() is not supplied, the output of this function
- *      is used instead.
- *
- *      Optionally defined in: LLD
- **/
-    const char * info(struct Scsi_Host * shp)
-
-
-/**
- *      ioctl - driver can respond to ioctls
- *      @sdp: device that ioctl was issued for
- *      @cmd: ioctl number
- *      @arg: pointer to read or write data from. Since it points to
- *            user space, should use appropriate kernel functions
- *            (e.g. copy_from_user() ). In the Unix style this argument
- *            can also be viewed as an unsigned long.
- *
- *      Returns negative "errno" value when there is a problem. 0 or a
- *      positive value indicates success and is returned to the user space.
- *
- *      Locks: none
- *
- *      Calling context: process
- *
- *      Notes: The SCSI subsystem uses a "trickle down" ioctl model.
- *      The user issues an ioctl() against an upper level driver
- *      (e.g. /dev/sdc) and if the upper level driver doesn't recognize
- *      the 'cmd' then it is passed to the SCSI mid level. If the SCSI
- *      mid level does not recognize it, then the LLD that controls
- *      the device receives the ioctl. According to recent Unix standards
- *      unsupported ioctl() 'cmd' numbers should return -ENOTTY.
- *
- *      Optionally defined in: LLD
- **/
-    int ioctl(struct scsi_device *sdp, int cmd, void *arg)
-
-
-/**
- *      proc_info - supports /proc/scsi/{driver_name}/{host_no}
- *      @buffer: anchor point to output to (0==writeto1_read0) or fetch from
- *               (1==writeto1_read0).
- *      @start: where "interesting" data is written to. Ignored when
- *              1==writeto1_read0.
- *      @offset: offset within buffer 0==writeto1_read0 is actually
- *               interested in. Ignored when 1==writeto1_read0 .
- *      @length: maximum (or actual) extent of buffer
- *      @host_no: host number of interest (struct Scsi_Host::host_no)
- *      @writeto1_read0: 1 -> data coming from user space towards driver
- *                            (e.g. "echo some_string > /proc/scsi/xyz/2")
- *                       0 -> user what data from this driver
- *                            (e.g. "cat /proc/scsi/xyz/2")
- *
- *      Returns length when 1==writeto1_read0. Otherwise number of chars
- *      output to buffer past offset.
- *
- *      Locks: none held
- *
- *      Calling context: process
- *
- *      Notes: Driven from scsi_proc.c which interfaces to proc_fs. proc_fs
- *      support can now be configured out of the scsi subsystem.
- *
- *      Optionally defined in: LLD
- **/
-    int proc_info(char * buffer, char ** start, off_t offset, 
-                  int length, int host_no, int writeto1_read0)
-
-
-/**
- *      queuecommand - queue scsi command, invoke scp->scsi_done on completion
- *      @shost: pointer to the scsi host object
- *      @scp: pointer to scsi command object
- *
- *      Returns 0 on success.
- *
- *      If there's a failure, return either:
- *
- *      SCSI_MLQUEUE_DEVICE_BUSY if the device queue is full, or
- *      SCSI_MLQUEUE_HOST_BUSY if the entire host queue is full
- *
- *      On both of these returns, the mid-layer will requeue the I/O
- *
- *      - if the return is SCSI_MLQUEUE_DEVICE_BUSY, only that particular
- *      device will be paused, and it will be unpaused when a command to
- *      the device returns (or after a brief delay if there are no more
- *      outstanding commands to it).  Commands to other devices continue
- *      to be processed normally.
- *
- *      - if the return is SCSI_MLQUEUE_HOST_BUSY, all I/O to the host
- *      is paused and will be unpaused when any command returns from
- *      the host (or after a brief delay if there are no outstanding
- *      commands to the host).
- *
- *      For compatibility with earlier versions of queuecommand, any
- *      other return value is treated the same as
- *      SCSI_MLQUEUE_HOST_BUSY.
- *
- *      Other types of errors that are detected immediately may be
- *      flagged by setting scp->result to an appropriate value,
- *      invoking the scp->scsi_done callback, and then returning 0
- *      from this function. If the command is not performed
- *      immediately (and the LLD is starting (or will start) the given
- *      command) then this function should place 0 in scp->result and
- *      return 0.
- *
- *      Command ownership.  If the driver returns zero, it owns the
- *      command and must take responsibility for ensuring the
- *      scp->scsi_done callback is executed.  Note: the driver may
- *      call scp->scsi_done before returning zero, but after it has
- *      called scp->scsi_done, it may not return any value other than
- *      zero.  If the driver makes a non-zero return, it must not
- *      execute the command's scsi_done callback at any time.
- *
- *      Locks: up to and including 2.6.36, struct Scsi_Host::host_lock
- *             held on entry (with "irqsave") and is expected to be
- *             held on return. From 2.6.37 onwards, queuecommand is
- *             called without any locks held.
- *
- *      Calling context: in interrupt (soft irq) or process context
- *
- *      Notes: This function should be relatively fast. Normally it
- *      will not wait for IO to complete. Hence the scp->scsi_done
- *      callback is invoked (often directly from an interrupt service
- *      routine) some time after this function has returned. In some
- *      cases (e.g. pseudo adapter drivers that manufacture the
- *      response to a SCSI INQUIRY) the scp->scsi_done callback may be
- *      invoked before this function returns.  If the scp->scsi_done
- *      callback is not invoked within a certain period the SCSI mid
- *      level will commence error processing.  If a status of CHECK
- *      CONDITION is placed in "result" when the scp->scsi_done
- *      callback is invoked, then the LLD driver should perform
- *      autosense and fill in the struct scsi_cmnd::sense_buffer
- *      array. The scsi_cmnd::sense_buffer array is zeroed prior to
- *      the mid level queuing a command to an LLD.
- *
- *      Defined in: LLD
- **/
-    int queuecommand(struct Scsi_Host *shost, struct scsi_cmnd * scp)
-
-
-/**
- *      slave_alloc -   prior to any commands being sent to a new device 
- *                      (i.e. just prior to scan) this call is made
- *      @sdp: pointer to new device (about to be scanned)
- *
- *      Returns 0 if ok. Any other return is assumed to be an error and
- *      the device is ignored.
- *
- *      Locks: none
- *
- *      Calling context: process
- *
- *      Notes: Allows the driver to allocate any resources for a device
- *      prior to its initial scan. The corresponding scsi device may not
- *      exist but the mid level is just about to scan for it (i.e. send
- *      and INQUIRY command plus ...). If a device is found then
- *      slave_configure() will be called while if a device is not found
- *      slave_destroy() is called.
- *      For more details see the include/scsi/scsi_host.h file.
- *
- *      Optionally defined in: LLD
- **/
-    int slave_alloc(struct scsi_device *sdp)
-
-
-/**
- *      slave_configure - driver fine tuning for given device just after it
- *                     has been first scanned (i.e. it responded to an
- *                     INQUIRY)
- *      @sdp: device that has just been attached
- *
- *      Returns 0 if ok. Any other return is assumed to be an error and
- *      the device is taken offline. [offline devices will _not_ have
- *      slave_destroy() called on them so clean up resources.]
- *
- *      Locks: none
- *
- *      Calling context: process
- *
- *      Notes: Allows the driver to inspect the response to the initial
- *      INQUIRY done by the scanning code and take appropriate action.
- *      For more details see the include/scsi/scsi_host.h file.
- *
- *      Optionally defined in: LLD
- **/
-    int slave_configure(struct scsi_device *sdp)
-
-
-/**
- *      slave_destroy - given device is about to be shut down. All
- *                      activity has ceased on this device.
- *      @sdp: device that is about to be shut down
- *
- *      Returns nothing
- *
- *      Locks: none
- *
- *      Calling context: process
- *
- *      Notes: Mid level structures for given device are still in place
- *      but are about to be torn down. Any per device resources allocated
- *      by this driver for given device should be freed now. No further
- *      commands will be sent for this sdp instance. [However the device
- *      could be re-attached in the future in which case a new instance
- *      of struct scsi_device would be supplied by future slave_alloc()
- *      and slave_configure() calls.]
- *
- *      Optionally defined in: LLD
- **/
-    void slave_destroy(struct scsi_device *sdp)
-
-
-
-Data Structures
-===============
-struct scsi_host_template
--------------------------
-There is one "struct scsi_host_template" instance per LLD ***. It is
-typically initialized as a file scope static in a driver's header file. That
-way members that are not explicitly initialized will be set to 0 or NULL.
-Member of interest:
-    name         - name of driver (may contain spaces, please limit to
-                   less than 80 characters)
-    proc_name    - name used in "/proc/scsi/<proc_name>/<host_no>" and
-                   by sysfs in one of its "drivers" directories. Hence
-                   "proc_name" should only contain characters acceptable
-                   to a Unix file name.
-   (*queuecommand)() - primary callback that the mid level uses to inject
-                   SCSI commands into an LLD.
-The structure is defined and commented in include/scsi/scsi_host.h
-
-*** In extreme situations a single driver may have several instances
-    if it controls several different classes of hardware (e.g. an LLD
-    that handles both ISA and PCI cards and has a separate instance of
-    struct scsi_host_template for each class).
-
-struct Scsi_Host
-----------------
-There is one struct Scsi_Host instance per host (HBA) that an LLD
-controls. The struct Scsi_Host structure has many members in common
-with "struct scsi_host_template". When a new struct Scsi_Host instance
-is created (in scsi_host_alloc() in hosts.c) those common members are
-initialized from the driver's struct scsi_host_template instance. Members
-of interest:
-    host_no      - system wide unique number that is used for identifying
-                   this host. Issued in ascending order from 0.
-    can_queue    - must be greater than 0; do not send more than can_queue
-                   commands to the adapter.
-    this_id      - scsi id of host (scsi initiator) or -1 if not known
-    sg_tablesize - maximum scatter gather elements allowed by host.
-                   Set this to SG_ALL or less to avoid chained SG lists.
-                   Must be at least 1.
-    max_sectors  - maximum number of sectors (usually 512 bytes) allowed
-                   in a single SCSI command. The default value of 0 leads
-                   to a setting of SCSI_DEFAULT_MAX_SECTORS (defined in
-                   scsi_host.h) which is currently set to 1024. So for a
-                   disk the maximum transfer size is 512 KB when max_sectors
-                   is not defined. Note that this size may not be sufficient
-                   for disk firmware uploads.
-    cmd_per_lun  - maximum number of commands that can be queued on devices
-                   controlled by the host. Overridden by LLD calls to
-                   scsi_change_queue_depth().
-    unchecked_isa_dma - 1=>only use bottom 16 MB of ram (ISA DMA addressing
-                   restriction), 0=>can use full 32 bit (or better) DMA
-                   address space
-    no_async_abort - 1=>Asynchronous aborts are not supported
-                     0=>Timed-out commands will be aborted asynchronously
-    hostt        - pointer to driver's struct scsi_host_template from which
-                   this struct Scsi_Host instance was spawned
-    hostt->proc_name  - name of LLD. This is the driver name that sysfs uses
-    transportt   - pointer to driver's struct scsi_transport_template instance
-                   (if any). FC and SPI transports currently supported.
-    sh_list      - a double linked list of pointers to all struct Scsi_Host
-                   instances (currently ordered by ascending host_no)
-    my_devices   - a double linked list of pointers to struct scsi_device 
-                   instances that belong to this host.
-    hostdata[0]  - area reserved for LLD at end of struct Scsi_Host. Size
-                   is set by the second argument (named 'xtr_bytes') to
-                   scsi_host_alloc() or scsi_register().
-    vendor_id    - a unique value that identifies the vendor supplying
-                   the LLD for the Scsi_Host.  Used most often in validating
-                   vendor-specific message requests.  Value consists of an
-                   identifier type and a vendor-specific value.
-                   See scsi_netlink.h for a description of valid formats.
-
-The scsi_host structure is defined in include/scsi/scsi_host.h
-
-struct scsi_device
-------------------
-Generally, there is one instance of this structure for each SCSI logical unit
-on a host. Scsi devices connected to a host are uniquely identified by a
-channel number, target id and logical unit number (lun).
-The structure is defined in include/scsi/scsi_device.h
-
-struct scsi_cmnd
-----------------
-Instances of this structure convey SCSI commands to the LLD and responses
-back to the mid level. The SCSI mid level will ensure that no more SCSI
-commands become queued against the LLD than are indicated by
-scsi_change_queue_depth() (or struct Scsi_Host::cmd_per_lun). There will
-be at least one instance of struct scsi_cmnd available for each SCSI device.
-Members of interest:
-    cmnd         - array containing SCSI command
-    cmnd_len     - length (in bytes) of SCSI command
-    sc_data_direction - direction of data transfer in data phase. See
-                "enum dma_data_direction" in include/linux/dma-mapping.h
-    request_bufflen - number of data bytes to transfer (0 if no data phase)
-    use_sg       - ==0 -> no scatter gather list, hence transfer data
-                          to/from request_buffer
-                 - >0 ->  scatter gather list (actually an array) in
-                          request_buffer with use_sg elements
-    request_buffer - either contains data buffer or scatter gather list
-                     depending on the setting of use_sg. Scatter gather
-                     elements are defined by 'struct scatterlist' found
-                     in include/linux/scatterlist.h .
-    done         - function pointer that should be invoked by LLD when the
-                   SCSI command is completed (successfully or otherwise).
-                   Should only be called by an LLD if the LLD has accepted
-                   the command (i.e. queuecommand() returned or will return
-                   0). The LLD may invoke 'done'  prior to queuecommand()
-                   finishing.
-    result       - should be set by LLD prior to calling 'done'. A value
-                   of 0 implies a successfully completed command (and all
-                   data (if any) has been transferred to or from the SCSI
-                   target device). 'result' is a 32 bit unsigned integer that
-                   can be viewed as 4 related bytes. The SCSI status value is
-                   in the LSB. See include/scsi/scsi.h status_byte(),
-                   msg_byte(), host_byte() and driver_byte() macros and
-                   related constants.
-    sense_buffer - an array (maximum size: SCSI_SENSE_BUFFERSIZE bytes) that
-                   should be written when the SCSI status (LSB of 'result')
-                   is set to CHECK_CONDITION (2). When CHECK_CONDITION is
-                   set, if the top nibble of sense_buffer[0] has the value 7
-                   then the mid level will assume the sense_buffer array
-                   contains a valid SCSI sense buffer; otherwise the mid
-                   level will issue a REQUEST_SENSE SCSI command to
-                   retrieve the sense buffer. The latter strategy is error
-                   prone in the presence of command queuing so the LLD should
-                   always "auto-sense".
-    device       - pointer to scsi_device object that this command is
-                   associated with.
-    resid        - an LLD should set this signed integer to the requested
-                   transfer length (i.e. 'request_bufflen') less the number
-                   of bytes that are actually transferred. 'resid' is
-                   preset to 0 so an LLD can ignore it if it cannot detect
-                   underruns (overruns should be rare). If possible an LLD
-                   should set 'resid' prior to invoking 'done'. The most
-                   interesting case is data transfers from a SCSI target
-                   device (e.g. READs) that underrun.
-    underflow    - LLD should place (DID_ERROR << 16) in 'result' if
-                   actual number of bytes transferred is less than this
-                   figure. Not many LLDs implement this check and some that
-                   do just output an error message to the log rather than
-                   report a DID_ERROR. Better for an LLD to implement
-                   'resid'.
-
-It is recommended that a LLD set 'resid' on data transfers from a SCSI
-target device (e.g. READs). It is especially important that 'resid' is set
-when such data transfers have sense keys of MEDIUM ERROR and HARDWARE ERROR
-(and possibly RECOVERED ERROR). In these cases if a LLD is in doubt how much
-data has been received then the safest approach is to indicate no bytes have
-been received. For example: to indicate that no valid data has been received
-a LLD might use these helpers:
-    scsi_set_resid(SCpnt, scsi_bufflen(SCpnt));
-where 'SCpnt' is a pointer to a scsi_cmnd object. To indicate only three 512
-bytes blocks has been received 'resid' could be set like this:
-    scsi_set_resid(SCpnt, scsi_bufflen(SCpnt) - (3 * 512));
-
-The scsi_cmnd structure is defined in include/scsi/scsi_cmnd.h
-
-
-Locks
-=====
-Each struct Scsi_Host instance has a spin_lock called struct 
-Scsi_Host::default_lock which is initialized in scsi_host_alloc() [found in 
-hosts.c]. Within the same function the struct Scsi_Host::host_lock pointer
-is initialized to point at default_lock.  Thereafter lock and unlock
-operations performed by the mid level use the struct Scsi_Host::host_lock
-pointer.  Previously drivers could override the host_lock pointer but
-this is not allowed anymore.
-
-
-Autosense
-=========
-Autosense (or auto-sense) is defined in the SAM-2 document as "the
-automatic return of sense data to the application client coincident
-with the completion of a SCSI command" when a status of CHECK CONDITION
-occurs. LLDs should perform autosense. This should be done when the LLD
-detects a CHECK CONDITION status by either: 
-    a) instructing the SCSI protocol (e.g. SCSI Parallel Interface (SPI))
-       to perform an extra data in phase on such responses
-    b) or, the LLD issuing a REQUEST SENSE command itself
-
-Either way, when a status of CHECK CONDITION is detected, the mid level
-decides whether the LLD has performed autosense by checking struct 
-scsi_cmnd::sense_buffer[0] . If this byte has an upper nibble of 7 (or 0xf)
-then autosense is assumed to have taken place. If it has another value (and
-this byte is initialized to 0 before each command) then the mid level will
-issue a REQUEST SENSE command.
-
-In the presence of queued commands the "nexus" that maintains sense
-buffer data from the command that failed until a following REQUEST SENSE
-may get out of synchronization. This is why it is best for the LLD
-to perform autosense.
-
-
-Changes since lk 2.4 series
-===========================
-io_request_lock has been replaced by several finer grained locks. The lock 
-relevant to LLDs is struct Scsi_Host::host_lock and there is
-one per SCSI host.
-
-The older error handling mechanism has been removed. This means the
-LLD interface functions abort() and reset() have been removed.
-The struct scsi_host_template::use_new_eh_code flag has been removed.
-
-In the 2.4 series the SCSI subsystem configuration descriptions were 
-aggregated with the configuration descriptions from all other Linux 
-subsystems in the Documentation/Configure.help file. In the 2.6 series, 
-the SCSI subsystem now has its own (much smaller) drivers/scsi/Kconfig
-file that contains both configuration and help information.
-
-struct SHT has been renamed to struct scsi_host_template.
-
-Addition of the "hotplug initialization model" and many extra functions
-to support it.
-
-
-Credits
-=======
-The following people have contributed to this document:
-        Mike Anderson <andmike at us dot ibm dot com>
-        James Bottomley <James dot Bottomley at hansenpartnership dot com>
-        Patrick Mansfield <patmans at us dot ibm dot com> 
-        Christoph Hellwig <hch at infradead dot org>
-        Doug Ledford <dledford at redhat dot com>
-        Andries Brouwer <Andries dot Brouwer at cwi dot nl>
-        Randy Dunlap <rdunlap at xenotime dot net>
-        Alan Stern <stern at rowland dot harvard dot edu>
-
-
-Douglas Gilbert
-dgilbert at interlog dot com
-21st September 2004
diff --git a/Documentation/scsi/scsi_transport_srp/Makefile b/Documentation/scsi/scsi_transport_srp/Makefile
deleted file mode 100644
index 5f6b567..0000000
--- a/Documentation/scsi/scsi_transport_srp/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-all: rport_state_diagram.svg rport_state_diagram.png
-
-rport_state_diagram.svg: rport_state_diagram.dot
-	dot -Tsvg -o $@ $<
-
-rport_state_diagram.png: rport_state_diagram.dot
-	dot -Tpng -o $@ $<
diff --git a/Documentation/scsi/scsi_transport_srp/figures.rst b/Documentation/scsi/scsi_transport_srp/figures.rst
new file mode 100644
index 0000000..6c8f8dd
--- /dev/null
+++ b/Documentation/scsi/scsi_transport_srp/figures.rst
@@ -0,0 +1,6 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+SCSI RDMA (SRP) transport class diagram
+=======================================
+
+.. kernel-figure:: rport_state_diagram.dot
diff --git a/Documentation/scsi/sd-parameters.rst b/Documentation/scsi/sd-parameters.rst
new file mode 100644
index 0000000..87d5540
--- /dev/null
+++ b/Documentation/scsi/sd-parameters.rst
@@ -0,0 +1,27 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+======================================
+Linux SCSI Disk Driver (sd) Parameters
+======================================
+
+cache_type (RW)
+---------------
+Enable/disable drive write & read cache.
+
+===========================   === ===   ===========   ==========
+ cache_type string            WCE RCD   Write cache   Read cache
+===========================   === ===   ===========   ==========
+ write through                0   0     off           on
+ none                         0   1     off           off
+ write back                   1   0     on            on
+ write back, no read (daft)   1   1     on            off
+===========================   === ===   ===========   ==========
+
+To set cache type to "write back" and save this setting to the drive::
+
+  # echo "write back" > cache_type
+
+To modify the caching mode without making the change persistent, prepend
+"temporary " to the cache type string. E.g.::
+
+  # echo "temporary write back" > cache_type
diff --git a/Documentation/scsi/sd-parameters.txt b/Documentation/scsi/sd-parameters.txt
deleted file mode 100644
index 8e5af00..0000000
--- a/Documentation/scsi/sd-parameters.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Linux SCSI Disk Driver (sd) Parameters
-======================================
-
-cache_type (RW)
----------------
-Enable/disable drive write & read cache.
-
- cache_type string          | WCE RCD | Write cache | Read cache
-----------------------------+---------+-------------+------------
- write through              | 0   0   | off         | on
- none                       | 0   1   | off         | off
- write back                 | 1   0   | on          | on
- write back, no read (daft) | 1   1   | on          | off
-
-To set cache type to "write back" and save this setting to the drive:
-
-  # echo "write back" > cache_type
-
-To modify the caching mode without making the change persistent, prepend
-"temporary " to the cache type string. E.g.:
-
-  # echo "temporary write back" > cache_type
diff --git a/Documentation/scsi/smartpqi.rst b/Documentation/scsi/smartpqi.rst
new file mode 100644
index 0000000..a7de273
--- /dev/null
+++ b/Documentation/scsi/smartpqi.rst
@@ -0,0 +1,78 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=====================================
+SMARTPQI - Microsemi Smart PQI Driver
+=====================================
+
+This file describes the smartpqi SCSI driver for Microsemi
+(http://www.microsemi.com) PQI controllers. The smartpqi driver
+is the next generation SCSI driver for Microsemi Corp. The smartpqi
+driver is the first SCSI driver to implement the PQI queuing model.
+
+The smartpqi driver will replace the aacraid driver for Adaptec Series 9
+controllers. Customers running an older kernel (Pre-4.9) using an Adaptec
+Series 9 controller will have to configure the smartpqi driver or their
+volumes will not be added to the OS.
+
+For Microsemi smartpqi controller support, enable the smartpqi driver
+when configuring the kernel.
+
+For more information on the PQI Queuing Interface, please see:
+
+- http://www.t10.org/drafts.htm
+- http://www.t10.org/members/w_pqi2.htm
+
+Supported devices
+=================
+<Controller names to be added as they become publicly available.>
+
+smartpqi specific entries in /sys
+=================================
+
+smartpqi host attributes
+------------------------
+  - /sys/class/scsi_host/host*/rescan
+  - /sys/class/scsi_host/host*/driver_version
+
+  The host rescan attribute is a write only attribute. Writing to this
+  attribute will trigger the driver to scan for new, changed, or removed
+  devices and notify the SCSI mid-layer of any changes detected.
+
+  The version attribute is read-only and will return the driver version
+  and the controller firmware version.
+  For example::
+
+              driver: 0.9.13-370
+              firmware: 0.01-522
+
+smartpqi sas device attributes
+------------------------------
+  HBA devices are added to the SAS transport layer. These attributes are
+  automatically added by the SAS transport layer.
+
+  /sys/class/sas_device/end_device-X:X/sas_address
+  /sys/class/sas_device/end_device-X:X/enclosure_identifier
+  /sys/class/sas_device/end_device-X:X/scsi_target_id
+
+smartpqi specific ioctls
+========================
+
+  For compatibility with applications written for the cciss protocol.
+
+  CCISS_DEREGDISK, CCISS_REGNEWDISK, CCISS_REGNEWD
+	The above three ioctls all do exactly the same thing, which is to cause the driver
+	to rescan for new devices.  This does exactly the same thing as writing to the
+	smartpqi specific host "rescan" attribute.
+
+  CCISS_GETPCIINFO
+	Returns PCI domain, bus, device and function and "board ID" (PCI subsystem ID).
+
+  CCISS_GETDRIVVER
+	Returns driver version in three bytes encoded as::
+
+	  (DRIVER_MAJOR << 28) | (DRIVER_MINOR << 24) | (DRIVER_RELEASE << 16) | DRIVER_REVISION;
+
+  CCISS_PASSTHRU
+	Allows "BMIC" and "CISS" commands to be passed through to the Smart Storage Array.
+	These are used extensively by the SSA Array Configuration Utility, SNMP storage
+	agents, etc.
diff --git a/Documentation/scsi/smartpqi.txt b/Documentation/scsi/smartpqi.txt
deleted file mode 100644
index df129f55..0000000
--- a/Documentation/scsi/smartpqi.txt
+++ /dev/null
@@ -1,80 +0,0 @@
-
-SMARTPQI - Microsemi Smart PQI Driver
------------------------------------------
-
-This file describes the smartpqi SCSI driver for Microsemi
-(http://www.microsemi.com) PQI controllers. The smartpqi driver
-is the next generation SCSI driver for Microsemi Corp. The smartpqi
-driver is the first SCSI driver to implement the PQI queuing model.
-
-The smartpqi driver will replace the aacraid driver for Adaptec Series 9
-controllers. Customers running an older kernel (Pre-4.9) using an Adaptec
-Series 9 controller will have to configure the smartpqi driver or their
-volumes will not be added to the OS.
-
-For Microsemi smartpqi controller support, enable the smartpqi driver
-when configuring the kernel.
-
-For more information on the PQI Queuing Interface, please see:
-http://www.t10.org/drafts.htm
-http://www.t10.org/members/w_pqi2.htm
-
-Supported devices:
-------------------
-<Controller names to be added as they become publicly available.>
-
-smartpqi specific entries in /sys
------------------------------
-
-  smartpqi host attributes:
-  -------------------------
-  /sys/class/scsi_host/host*/rescan
-  /sys/class/scsi_host/host*/driver_version
-
-  The host rescan attribute is a write only attribute. Writing to this
-  attribute will trigger the driver to scan for new, changed, or removed
-  devices and notify the SCSI mid-layer of any changes detected.
-
-  The version attribute is read-only and will return the driver version
-  and the controller firmware version.
-  For example:
-              driver: 0.9.13-370
-              firmware: 0.01-522
-
-  smartpqi sas device attributes
-  ------------------------------
-  HBA devices are added to the SAS transport layer. These attributes are
-  automatically added by the SAS transport layer.
-
-  /sys/class/sas_device/end_device-X:X/sas_address
-  /sys/class/sas_device/end_device-X:X/enclosure_identifier
-  /sys/class/sas_device/end_device-X:X/scsi_target_id
-
-smartpqi specific ioctls:
--------------------------
-
-  For compatibility with applications written for the cciss protocol.
-
-  CCISS_DEREGDISK
-  CCISS_REGNEWDISK
-  CCISS_REGNEWD
-
-  The above three ioctls all do exactly the same thing, which is to cause the driver
-  to rescan for new devices.  This does exactly the same thing as writing to the
-  smartpqi specific host "rescan" attribute.
-
-  CCISS_GETPCIINFO
-
-	Returns PCI domain, bus, device and function and "board ID" (PCI subsystem ID).
-
-  CCISS_GETDRIVVER
-
-	Returns driver version in three bytes encoded as:
-	(DRIVER_MAJOR << 28) | (DRIVER_MINOR << 24) | (DRIVER_RELEASE << 16) | DRIVER_REVISION;
-
-  CCISS_PASSTHRU
-
-	Allows "BMIC" and "CISS" commands to be passed through to the Smart Storage Array.
-	These are used extensively by the SSA Array Configuration Utility, SNMP storage
-	agents, etc.
-
diff --git a/Documentation/scsi/st.rst b/Documentation/scsi/st.rst
new file mode 100644
index 0000000..d3b28c2
--- /dev/null
+++ b/Documentation/scsi/st.rst
@@ -0,0 +1,673 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+====================
+The SCSI Tape Driver
+====================
+
+This file contains brief information about the SCSI tape driver.
+The driver is currently maintained by Kai Mäkisara (email
+Kai.Makisara@kolumbus.fi)
+
+Last modified: Tue Feb  9 21:54:16 2016 by kai.makisara
+
+
+Basics
+======
+
+The driver is generic, i.e., it does not contain any code tailored
+to any specific tape drive. The tape parameters can be specified with
+one of the following three methods:
+
+1. Each user can specify the tape parameters he/she wants to use
+directly with ioctls. This is administratively a very simple and
+flexible method and applicable to single-user workstations. However,
+in a multiuser environment the next user finds the tape parameters in
+state the previous user left them.
+
+2. The system manager (root) can define default values for some tape
+parameters, like block size and density using the MTSETDRVBUFFER ioctl.
+These parameters can be programmed to come into effect either when a
+new tape is loaded into the drive or if writing begins at the
+beginning of the tape. The second method is applicable if the tape
+drive performs auto-detection of the tape format well (like some
+QIC-drives). The result is that any tape can be read, writing can be
+continued using existing format, and the default format is used if
+the tape is rewritten from the beginning (or a new tape is written
+for the first time). The first method is applicable if the drive
+does not perform auto-detection well enough and there is a single
+"sensible" mode for the device. An example is a DAT drive that is
+used only in variable block mode (I don't know if this is sensible
+or not :-).
+
+The user can override the parameters defined by the system
+manager. The changes persist until the defaults again come into
+effect.
+
+3. By default, up to four modes can be defined and selected using the minor
+number (bits 5 and 6). The number of modes can be changed by changing
+ST_NBR_MODE_BITS in st.h. Mode 0 corresponds to the defaults discussed
+above. Additional modes are dormant until they are defined by the
+system manager (root). When specification of a new mode is started,
+the configuration of mode 0 is used to provide a starting point for
+definition of the new mode.
+
+Using the modes allows the system manager to give the users choices
+over some of the buffering parameters not directly accessible to the
+users (buffered and asynchronous writes). The modes also allow choices
+between formats in multi-tape operations (the explicitly overridden
+parameters are reset when a new tape is loaded).
+
+If more than one mode is used, all modes should contain definitions
+for the same set of parameters.
+
+Many Unices contain internal tables that associate different modes to
+supported devices. The Linux SCSI tape driver does not contain such
+tables (and will not do that in future). Instead of that, a utility
+program can be made that fetches the inquiry data sent by the device,
+scans its database, and sets up the modes using the ioctls. Another
+alternative is to make a small script that uses mt to set the defaults
+tailored to the system.
+
+The driver supports fixed and variable block size (within buffer
+limits). Both the auto-rewind (minor equals device number) and
+non-rewind devices (minor is 128 + device number) are implemented.
+
+In variable block mode, the byte count in write() determines the size
+of the physical block on tape. When reading, the drive reads the next
+tape block and returns to the user the data if the read() byte count
+is at least the block size. Otherwise, error ENOMEM is returned.
+
+In fixed block mode, the data transfer between the drive and the
+driver is in multiples of the block size. The write() byte count must
+be a multiple of the block size. This is not required when reading but
+may be advisable for portability.
+
+Support is provided for changing the tape partition and partitioning
+of the tape with one or two partitions. By default support for
+partitioned tape is disabled for each driver and it can be enabled
+with the ioctl MTSETDRVBUFFER.
+
+By default the driver writes one filemark when the device is closed after
+writing and the last operation has been a write. Two filemarks can be
+optionally written. In both cases end of data is signified by
+returning zero bytes for two consecutive reads.
+
+Writing filemarks without the immediate bit set in the SCSI command block acts
+as a synchronization point, i.e., all remaining data form the drive buffers is
+written to tape before the command returns. This makes sure that write errors
+are caught at that point, but this takes time. In some applications, several
+consecutive files must be written fast. The MTWEOFI operation can be used to
+write the filemarks without flushing the drive buffer. Writing filemark at
+close() is always flushing the drive buffers. However, if the previous
+operation is MTWEOFI, close() does not write a filemark. This can be used if
+the program wants to close/open the tape device between files and wants to
+skip waiting.
+
+If rewind, offline, bsf, or seek is done and previous tape operation was
+write, a filemark is written before moving tape.
+
+The compile options are defined in the file linux/drivers/scsi/st_options.h.
+
+4. If the open option O_NONBLOCK is used, open succeeds even if the
+drive is not ready. If O_NONBLOCK is not used, the driver waits for
+the drive to become ready. If this does not happen in ST_BLOCK_SECONDS
+seconds, open fails with the errno value EIO. With O_NONBLOCK the
+device can be opened for writing even if there is a write protected
+tape in the drive (commands trying to write something return error if
+attempted).
+
+
+Minor Numbers
+=============
+
+The tape driver currently supports up to 2^17 drives if 4 modes for
+each drive are used.
+
+The minor numbers consist of the following bit fields::
+
+    dev_upper non-rew mode dev-lower
+    20 -  8     7    6 5  4      0
+
+The non-rewind bit is always bit 7 (the uppermost bit in the lowermost
+byte). The bits defining the mode are below the non-rewind bit. The
+remaining bits define the tape device number. This numbering is
+backward compatible with the numbering used when the minor number was
+only 8 bits wide.
+
+
+Sysfs Support
+=============
+
+The driver creates the directory /sys/class/scsi_tape and populates it with
+directories corresponding to the existing tape devices. There are autorewind
+and non-rewind entries for each mode. The names are stxy and nstxy, where x
+is the tape number and y a character corresponding to the mode (none, l, m,
+a). For example, the directories for the first tape device are (assuming four
+modes): st0  nst0  st0l  nst0l  st0m  nst0m  st0a  nst0a.
+
+Each directory contains the entries: default_blksize  default_compression
+default_density  defined  dev  device  driver. The file 'defined' contains 1
+if the mode is defined and zero if not defined. The files 'default_*' contain
+the defaults set by the user. The value -1 means the default is not set. The
+file 'dev' contains the device numbers corresponding to this device. The links
+'device' and 'driver' point to the SCSI device and driver entries.
+
+Each directory also contains the entry 'options' which shows the currently
+enabled driver and mode options. The value in the file is a bit mask where the
+bit definitions are the same as those used with MTSETDRVBUFFER in setting the
+options.
+
+A link named 'tape' is made from the SCSI device directory to the class
+directory corresponding to the mode 0 auto-rewind device (e.g., st0).
+
+
+Sysfs and Statistics for Tape Devices
+=====================================
+
+The st driver maintains statistics for tape drives inside the sysfs filesystem.
+The following method can be used to locate the statistics that are
+available (assuming that sysfs is mounted at /sys):
+
+1. Use opendir(3) on the directory /sys/class/scsi_tape
+2. Use readdir(3) to read the directory contents
+3. Use regcomp(3)/regexec(3) to match directory entries to the extended
+   regular expression "^st[0-9]+$"
+4. Access the statistics from the /sys/class/scsi_tape/<match>/stats
+   directory (where <match> is a directory entry from /sys/class/scsi_tape
+   that matched the extended regular expression)
+
+The reason for using this approach is that all the character devices
+pointing to the same tape drive use the same statistics. That means
+that st0 would have the same statistics as nst0.
+
+The directory contains the following statistics files:
+
+1.  in_flight
+      - The number of I/Os currently outstanding to this device.
+2.  io_ns
+      - The amount of time spent waiting (in nanoseconds) for all I/O
+        to complete (including read and write). This includes tape movement
+        commands such as seeking between file or set marks and implicit tape
+        movement such as when rewind on close tape devices are used.
+3.  other_cnt
+      - The number of I/Os issued to the tape drive other than read or
+        write commands. The time taken to complete these commands uses the
+        following calculation io_ms-read_ms-write_ms.
+4.  read_byte_cnt
+      - The number of bytes read from the tape drive.
+5.  read_cnt
+      - The number of read requests issued to the tape drive.
+6.  read_ns
+      - The amount of time (in nanoseconds) spent waiting for read
+        requests to complete.
+7.  write_byte_cnt
+      - The number of bytes written to the tape drive.
+8.  write_cnt
+      - The number of write requests issued to the tape drive.
+9.  write_ns
+      - The amount of time (in nanoseconds) spent waiting for write
+        requests to complete.
+10. resid_cnt
+      - The number of times during a read or write we found
+	the residual amount to be non-zero. This should mean that a program
+	is issuing a read larger thean the block size on tape. For write
+	not all data made it to tape.
+
+.. Note::
+
+   The in_flight value is incremented when an I/O starts the I/O
+   itself is not added to the statistics until it completes.
+
+The total of read_cnt, write_cnt, and other_cnt may not total to the same
+value as iodone_cnt at the device level. The tape statistics only count
+I/O issued via the st module.
+
+When read the statistics may not be temporally consistent while I/O is in
+progress. The individual values are read and written to atomically however
+when reading them back via sysfs they may be in the process of being
+updated when starting an I/O or when it is completed.
+
+The value shown in in_flight is incremented before any statstics are
+updated and decremented when an I/O completes after updating statistics.
+The value of in_flight is 0 when there are no I/Os outstanding that are
+issued by the st driver. Tape statistics do not take into account any
+I/O performed via the sg device.
+
+BSD and Sys V Semantics
+=======================
+
+The user can choose between these two behaviours of the tape driver by
+defining the value of the symbol ST_SYSV. The semantics differ when a
+file being read is closed. The BSD semantics leaves the tape where it
+currently is whereas the SYS V semantics moves the tape past the next
+filemark unless the filemark has just been crossed.
+
+The default is BSD semantics.
+
+
+Buffering
+=========
+
+The driver tries to do transfers directly to/from user space. If this
+is not possible, a driver buffer allocated at run-time is used. If
+direct i/o is not possible for the whole transfer, the driver buffer
+is used (i.e., bounce buffers for individual pages are not
+used). Direct i/o can be impossible because of several reasons, e.g.:
+
+- one or more pages are at addresses not reachable by the HBA
+- the number of pages in the transfer exceeds the number of
+  scatter/gather segments permitted by the HBA
+- one or more pages can't be locked into memory (should not happen in
+  any reasonable situation)
+
+The size of the driver buffers is always at least one tape block. In fixed
+block mode, the minimum buffer size is defined (in 1024 byte units) by
+ST_FIXED_BUFFER_BLOCKS. With small block size this allows buffering of
+several blocks and using one SCSI read or write to transfer all of the
+blocks. Buffering of data across write calls in fixed block mode is
+allowed if ST_BUFFER_WRITES is non-zero and direct i/o is not used.
+Buffer allocation uses chunks of memory having sizes 2^n * (page
+size). Because of this the actual buffer size may be larger than the
+minimum allowable buffer size.
+
+NOTE that if direct i/o is used, the small writes are not buffered. This may
+cause a surprise when moving from 2.4. There small writes (e.g., tar without
+-b option) may have had good throughput but this is not true any more with
+2.6. Direct i/o can be turned off to solve this problem but a better solution
+is to use bigger write() byte counts (e.g., tar -b 64).
+
+Asynchronous writing. Writing the buffer contents to the tape is
+started and the write call returns immediately. The status is checked
+at the next tape operation. Asynchronous writes are not done with
+direct i/o and not in fixed block mode.
+
+Buffered writes and asynchronous writes may in some rare cases cause
+problems in multivolume operations if there is not enough space on the
+tape after the early-warning mark to flush the driver buffer.
+
+Read ahead for fixed block mode (ST_READ_AHEAD). Filling the buffer is
+attempted even if the user does not want to get all of the data at
+this read command. Should be disabled for those drives that don't like
+a filemark to truncate a read request or that don't like backspacing.
+
+Scatter/gather buffers (buffers that consist of chunks non-contiguous
+in the physical memory) are used if contiguous buffers can't be
+allocated. To support all SCSI adapters (including those not
+supporting scatter/gather), buffer allocation is using the following
+three kinds of chunks:
+
+1. The initial segment that is used for all SCSI adapters including
+   those not supporting scatter/gather. The size of this buffer will be
+   (PAGE_SIZE << ST_FIRST_ORDER) bytes if the system can give a chunk of
+   this size (and it is not larger than the buffer size specified by
+   ST_BUFFER_BLOCKS). If this size is not available, the driver halves
+   the size and tries again until the size of one page. The default
+   settings in st_options.h make the driver to try to allocate all of the
+   buffer as one chunk.
+2. The scatter/gather segments to fill the specified buffer size are
+   allocated so that as many segments as possible are used but the number
+   of segments does not exceed ST_FIRST_SG.
+3. The remaining segments between ST_MAX_SG (or the module parameter
+   max_sg_segs) and the number of segments used in phases 1 and 2
+   are used to extend the buffer at run-time if this is necessary. The
+   number of scatter/gather segments allowed for the SCSI adapter is not
+   exceeded if it is smaller than the maximum number of scatter/gather
+   segments specified. If the maximum number allowed for the SCSI adapter
+   is smaller than the number of segments used in phases 1 and 2,
+   extending the buffer will always fail.
+
+
+EOM Behaviour When Writing
+==========================
+
+When the end of medium early warning is encountered, the current write
+is finished and the number of bytes is returned. The next write
+returns -1 and errno is set to ENOSPC. To enable writing a trailer,
+the next write is allowed to proceed and, if successful, the number of
+bytes is returned. After this, -1 and the number of bytes are
+alternately returned until the physical end of medium (or some other
+error) is encountered.
+
+Module Parameters
+=================
+
+The buffer size, write threshold, and the maximum number of allocated buffers
+are configurable when the driver is loaded as a module. The keywords are:
+
+========================== ===========================================
+buffer_kbs=xxx             the buffer size for fixed block mode is set
+			   to xxx kilobytes
+write_threshold_kbs=xxx    the write threshold in kilobytes set to xxx
+max_sg_segs=xxx		   the maximum number of scatter/gather
+			   segments
+try_direct_io=x		   try direct transfer between user buffer and
+			   tape drive if this is non-zero
+========================== ===========================================
+
+Note that if the buffer size is changed but the write threshold is not
+set, the write threshold is set to the new buffer size - 2 kB.
+
+
+Boot Time Configuration
+=======================
+
+If the driver is compiled into the kernel, the same parameters can be
+also set using, e.g., the LILO command line. The preferred syntax is
+to use the same keyword used when loading as module but prepended
+with 'st.'. For instance, to set the maximum number of scatter/gather
+segments, the parameter 'st.max_sg_segs=xx' should be used (xx is the
+number of scatter/gather segments).
+
+For compatibility, the old syntax from early 2.5 and 2.4 kernel
+versions is supported. The same keywords can be used as when loading
+the driver as module. If several parameters are set, the keyword-value
+pairs are separated with a comma (no spaces allowed). A colon can be
+used instead of the equal mark. The definition is prepended by the
+string st=. Here is an example::
+
+	st=buffer_kbs:64,write_threshold_kbs:60
+
+The following syntax used by the old kernel versions is also supported::
+
+           st=aa[,bb[,dd]]
+
+where:
+
+  - aa is the buffer size for fixed block mode in 1024 byte units
+  - bb is the write threshold in 1024 byte units
+  - dd is the maximum number of scatter/gather segments
+
+
+IOCTLs
+======
+
+The tape is positioned and the drive parameters are set with ioctls
+defined in mtio.h The tape control program 'mt' uses these ioctls. Try
+to find an mt that supports all of the Linux SCSI tape ioctls and
+opens the device for writing if the tape contents will be modified
+(look for a package mt-st* from the Linux ftp sites; the GNU mt does
+not open for writing for, e.g., erase).
+
+The supported ioctls are:
+
+The following use the structure mtop:
+
+MTFSF
+	Space forward over count filemarks. Tape positioned after filemark.
+MTFSFM
+	As above but tape positioned before filemark.
+MTBSF
+	Space backward over count filemarks. Tape positioned before
+        filemark.
+MTBSFM
+	As above but ape positioned after filemark.
+MTFSR
+	Space forward over count records.
+MTBSR
+	Space backward over count records.
+MTFSS
+	Space forward over count setmarks.
+MTBSS
+	Space backward over count setmarks.
+MTWEOF
+	Write count filemarks.
+MTWEOFI
+	Write count filemarks with immediate bit set (i.e., does not
+	wait until data is on tape)
+MTWSM
+	Write count setmarks.
+MTREW
+	Rewind tape.
+MTOFFL
+	Set device off line (often rewind plus eject).
+MTNOP
+	Do nothing except flush the buffers.
+MTRETEN
+	Re-tension tape.
+MTEOM
+	Space to end of recorded data.
+MTERASE
+	Erase tape. If the argument is zero, the short erase command
+	is used. The long erase command is used with all other values
+	of the argument.
+MTSEEK
+	Seek to tape block count. Uses Tandberg-compatible seek (QFA)
+        for SCSI-1 drives and SCSI-2 seek for SCSI-2 drives. The file and
+	block numbers in the status are not valid after a seek.
+MTSETBLK
+	Set the drive block size. Setting to zero sets the drive into
+        variable block mode (if applicable).
+MTSETDENSITY
+	Sets the drive density code to arg. See drive
+        documentation for available codes.
+MTLOCK and MTUNLOCK
+	Explicitly lock/unlock the tape drive door.
+MTLOAD and MTUNLOAD
+	Explicitly load and unload the tape. If the
+	command argument x is between MT_ST_HPLOADER_OFFSET + 1 and
+	MT_ST_HPLOADER_OFFSET + 6, the number x is used sent to the
+	drive with the command and it selects the tape slot to use of
+	HP C1553A changer.
+MTCOMPRESSION
+	Sets compressing or uncompressing drive mode using the
+	SCSI mode page 15. Note that some drives other methods for
+	control of compression. Some drives (like the Exabytes) use
+	density codes for compression control. Some drives use another
+	mode page but this page has not been implemented in the
+	driver. Some drives without compression capability will accept
+	any compression mode without error.
+MTSETPART
+	Moves the tape to the partition given by the argument at the
+	next tape operation. The block at which the tape is positioned
+	is the block where the tape was previously positioned in the
+	new active partition unless the next tape operation is
+	MTSEEK. In this case the tape is moved directly to the block
+	specified by MTSEEK. MTSETPART is inactive unless
+	MT_ST_CAN_PARTITIONS set.
+MTMKPART
+	Formats the tape with one partition (argument zero) or two
+	partitions (argument non-zero). If the argument is positive,
+	it specifies the size of partition 1 in megabytes. For DDS
+	drives and several early drives this is the physically first
+	partition of the tape. If the argument is negative, its absolute
+	value specifies the size of partition 0 in megabytes. This is
+	the physically first partition of many later drives, like the
+	LTO drives from LTO-5 upwards. The drive has to support partitions
+	with size specified by the initiator. Inactive unless
+	MT_ST_CAN_PARTITIONS set.
+MTSETDRVBUFFER
+	Is used for several purposes. The command is obtained from count
+        with mask MT_SET_OPTIONS, the low order bits are used as argument.
+	This command is only allowed for the superuser (root). The
+	subcommands are:
+
+	* 0
+           The drive buffer option is set to the argument. Zero means
+           no buffering.
+        * MT_ST_BOOLEANS
+           Sets the buffering options. The bits are the new states
+           (enabled/disabled) the following options (in the
+	   parenthesis is specified whether the option is global or
+	   can be specified differently for each mode):
+
+	     MT_ST_BUFFER_WRITES
+		write buffering (mode)
+	     MT_ST_ASYNC_WRITES
+		asynchronous writes (mode)
+             MT_ST_READ_AHEAD
+		read ahead (mode)
+             MT_ST_TWO_FM
+		writing of two filemarks (global)
+	     MT_ST_FAST_EOM
+		using the SCSI spacing to EOD (global)
+	     MT_ST_AUTO_LOCK
+		automatic locking of the drive door (global)
+             MT_ST_DEF_WRITES
+		the defaults are meant only for writes (mode)
+	     MT_ST_CAN_BSR
+		backspacing over more than one records can
+		be used for repositioning the tape (global)
+	     MT_ST_NO_BLKLIMS
+		the driver does not ask the block limits
+		from the drive (block size can be changed only to
+		variable) (global)
+	     MT_ST_CAN_PARTITIONS
+		enables support for partitioned
+		tapes (global)
+	     MT_ST_SCSI2LOGICAL
+		the logical block number is used in
+		the MTSEEK and MTIOCPOS for SCSI-2 drives instead of
+		the device dependent address. It is recommended to set
+		this flag unless there are tapes using the device
+		dependent (from the old times) (global)
+	     MT_ST_SYSV
+		sets the SYSV semantics (mode)
+	     MT_ST_NOWAIT
+		enables immediate mode (i.e., don't wait for
+	        the command to finish) for some commands (e.g., rewind)
+	     MT_ST_NOWAIT_EOF
+		enables immediate filemark mode (i.e. when
+	        writing a filemark, don't wait for it to complete). Please
+		see the BASICS note about MTWEOFI with respect to the
+		possible dangers of writing immediate filemarks.
+	     MT_ST_SILI
+		enables setting the SILI bit in SCSI commands when
+		reading in variable block mode to enhance performance when
+		reading blocks shorter than the byte count; set this only
+		if you are sure that the drive supports SILI and the HBA
+		correctly returns transfer residuals
+	     MT_ST_DEBUGGING
+		debugging (global; debugging must be
+		compiled into the driver)
+
+	* MT_ST_SETBOOLEANS, MT_ST_CLEARBOOLEANS
+	   Sets or clears the option bits.
+        * MT_ST_WRITE_THRESHOLD
+           Sets the write threshold for this device to kilobytes
+           specified by the lowest bits.
+	* MT_ST_DEF_BLKSIZE
+	   Defines the default block size set automatically. Value
+	   0xffffff means that the default is not used any more.
+	* MT_ST_DEF_DENSITY, MT_ST_DEF_DRVBUFFER
+	   Used to set or clear the density (8 bits), and drive buffer
+	   state (3 bits). If the value is MT_ST_CLEAR_DEFAULT
+	   (0xfffff) the default will not be used any more. Otherwise
+	   the lowermost bits of the value contain the new value of
+	   the parameter.
+	* MT_ST_DEF_COMPRESSION
+	   The compression default will not be used if the value of
+	   the lowermost byte is 0xff. Otherwise the lowermost bit
+	   contains the new default. If the bits 8-15 are set to a
+	   non-zero number, and this number is not 0xff, the number is
+	   used as the compression algorithm. The value
+	   MT_ST_CLEAR_DEFAULT can be used to clear the compression
+	   default.
+	* MT_ST_SET_TIMEOUT
+	   Set the normal timeout in seconds for this device. The
+	   default is 900 seconds (15 minutes). The timeout should be
+	   long enough for the retries done by the device while
+	   reading/writing.
+	* MT_ST_SET_LONG_TIMEOUT
+	   Set the long timeout that is used for operations that are
+	   known to take a long time. The default is 14000 seconds
+	   (3.9 hours). For erase this value is further multiplied by
+	   eight.
+	* MT_ST_SET_CLN
+	   Set the cleaning request interpretation parameters using
+	   the lowest 24 bits of the argument. The driver can set the
+	   generic status bit GMT_CLN if a cleaning request bit pattern
+	   is found from the extended sense data. Many drives set one or
+	   more bits in the extended sense data when the drive needs
+	   cleaning. The bits are device-dependent. The driver is
+	   given the number of the sense data byte (the lowest eight
+	   bits of the argument; must be >= 18 (values 1 - 17
+	   reserved) and <= the maximum requested sense data sixe),
+	   a mask to select the relevant bits (the bits 9-16), and the
+	   bit pattern (bits 17-23). If the bit pattern is zero, one
+	   or more bits under the mask indicate cleaning request. If
+	   the pattern is non-zero, the pattern must match the masked
+	   sense data byte.
+
+	   (The cleaning bit is set if the additional sense code and
+	   qualifier 00h 17h are seen regardless of the setting of
+	   MT_ST_SET_CLN.)
+
+The following ioctl uses the structure mtpos:
+
+MTIOCPOS
+	Reads the current position from the drive. Uses
+        Tandberg-compatible QFA for SCSI-1 drives and the SCSI-2
+        command for the SCSI-2 drives.
+
+The following ioctl uses the structure mtget to return the status:
+
+MTIOCGET
+	Returns some status information.
+        The file number and block number within file are returned. The
+        block is -1 when it can't be determined (e.g., after MTBSF).
+        The drive type is either MTISSCSI1 or MTISSCSI2.
+        The number of recovered errors since the previous status call
+        is stored in the lower word of the field mt_erreg.
+        The current block size and the density code are stored in the field
+        mt_dsreg (shifts for the subfields are MT_ST_BLKSIZE_SHIFT and
+        MT_ST_DENSITY_SHIFT).
+	The GMT_xxx status bits reflect the drive status. GMT_DR_OPEN
+	is set if there is no tape in the drive. GMT_EOD means either
+	end of recorded data or end of tape. GMT_EOT means end of tape.
+
+
+Miscellaneous Compile Options
+=============================
+
+The recovered write errors are considered fatal if ST_RECOVERED_WRITE_FATAL
+is defined.
+
+The maximum number of tape devices is determined by the define
+ST_MAX_TAPES. If more tapes are detected at driver initialization, the
+maximum is adjusted accordingly.
+
+Immediate return from tape positioning SCSI commands can be enabled by
+defining ST_NOWAIT. If this is defined, the user should take care that
+the next tape operation is not started before the previous one has
+finished. The drives and SCSI adapters should handle this condition
+gracefully, but some drive/adapter combinations are known to hang the
+SCSI bus in this case.
+
+The MTEOM command is by default implemented as spacing over 32767
+filemarks. With this method the file number in the status is
+correct. The user can request using direct spacing to EOD by setting
+ST_FAST_EOM 1 (or using the MT_ST_OPTIONS ioctl). In this case the file
+number will be invalid.
+
+When using read ahead or buffered writes the position within the file
+may not be correct after the file is closed (correct position may
+require backspacing over more than one record). The correct position
+within file can be obtained if ST_IN_FILE_POS is defined at compile
+time or the MT_ST_CAN_BSR bit is set for the drive with an ioctl.
+(The driver always backs over a filemark crossed by read ahead if the
+user does not request data that far.)
+
+
+Debugging Hints
+===============
+
+Debugging code is now compiled in by default but debugging is turned off
+with the kernel module parameter debug_flag defaulting to 0.  Debugging
+can still be switched on and off with an ioctl.  To enable debug at
+module load time add debug_flag=1 to the module load options, the
+debugging output is not voluminous. Debugging can also be enabled
+and disabled by writing a '0' (disable) or '1' (enable) to the sysfs
+file /sys/bus/scsi/drivers/st/debug_flag.
+
+If the tape seems to hang, I would be very interested to hear where
+the driver is waiting. With the command 'ps -l' you can see the state
+of the process using the tape. If the state is D, the process is
+waiting for something. The field WCHAN tells where the driver is
+waiting. If you have the current System.map in the correct place (in
+/boot for the procps I use) or have updated /etc/psdatabase (for kmem
+ps), ps writes the function name in the WCHAN field. If not, you have
+to look up the function from System.map.
+
+Note also that the timeouts are very long compared to most other
+drivers. This means that the Linux driver may appear hung although the
+real reason is that the tape firmware has got confused.
diff --git a/Documentation/scsi/st.txt b/Documentation/scsi/st.txt
deleted file mode 100644
index ec0acf6..0000000
--- a/Documentation/scsi/st.txt
+++ /dev/null
@@ -1,592 +0,0 @@
-This file contains brief information about the SCSI tape driver.
-The driver is currently maintained by Kai Mäkisara (email
-Kai.Makisara@kolumbus.fi)
-
-Last modified: Tue Feb  9 21:54:16 2016 by kai.makisara
-
-
-BASICS
-
-The driver is generic, i.e., it does not contain any code tailored
-to any specific tape drive. The tape parameters can be specified with
-one of the following three methods:
-
-1. Each user can specify the tape parameters he/she wants to use
-directly with ioctls. This is administratively a very simple and
-flexible method and applicable to single-user workstations. However,
-in a multiuser environment the next user finds the tape parameters in
-state the previous user left them.
-
-2. The system manager (root) can define default values for some tape
-parameters, like block size and density using the MTSETDRVBUFFER ioctl.
-These parameters can be programmed to come into effect either when a
-new tape is loaded into the drive or if writing begins at the
-beginning of the tape. The second method is applicable if the tape
-drive performs auto-detection of the tape format well (like some
-QIC-drives). The result is that any tape can be read, writing can be
-continued using existing format, and the default format is used if
-the tape is rewritten from the beginning (or a new tape is written
-for the first time). The first method is applicable if the drive
-does not perform auto-detection well enough and there is a single
-"sensible" mode for the device. An example is a DAT drive that is
-used only in variable block mode (I don't know if this is sensible
-or not :-).
-
-The user can override the parameters defined by the system
-manager. The changes persist until the defaults again come into
-effect.
-
-3. By default, up to four modes can be defined and selected using the minor
-number (bits 5 and 6). The number of modes can be changed by changing
-ST_NBR_MODE_BITS in st.h. Mode 0 corresponds to the defaults discussed
-above. Additional modes are dormant until they are defined by the
-system manager (root). When specification of a new mode is started,
-the configuration of mode 0 is used to provide a starting point for
-definition of the new mode.
-
-Using the modes allows the system manager to give the users choices
-over some of the buffering parameters not directly accessible to the
-users (buffered and asynchronous writes). The modes also allow choices
-between formats in multi-tape operations (the explicitly overridden
-parameters are reset when a new tape is loaded).
-
-If more than one mode is used, all modes should contain definitions
-for the same set of parameters.
-
-Many Unices contain internal tables that associate different modes to
-supported devices. The Linux SCSI tape driver does not contain such
-tables (and will not do that in future). Instead of that, a utility
-program can be made that fetches the inquiry data sent by the device,
-scans its database, and sets up the modes using the ioctls. Another
-alternative is to make a small script that uses mt to set the defaults
-tailored to the system.
-
-The driver supports fixed and variable block size (within buffer
-limits). Both the auto-rewind (minor equals device number) and
-non-rewind devices (minor is 128 + device number) are implemented.
-
-In variable block mode, the byte count in write() determines the size
-of the physical block on tape. When reading, the drive reads the next
-tape block and returns to the user the data if the read() byte count
-is at least the block size. Otherwise, error ENOMEM is returned.
-
-In fixed block mode, the data transfer between the drive and the
-driver is in multiples of the block size. The write() byte count must
-be a multiple of the block size. This is not required when reading but
-may be advisable for portability.
-
-Support is provided for changing the tape partition and partitioning
-of the tape with one or two partitions. By default support for
-partitioned tape is disabled for each driver and it can be enabled
-with the ioctl MTSETDRVBUFFER.
-
-By default the driver writes one filemark when the device is closed after
-writing and the last operation has been a write. Two filemarks can be
-optionally written. In both cases end of data is signified by
-returning zero bytes for two consecutive reads.
-
-Writing filemarks without the immediate bit set in the SCSI command block acts
-as a synchronization point, i.e., all remaining data form the drive buffers is
-written to tape before the command returns. This makes sure that write errors
-are caught at that point, but this takes time. In some applications, several
-consecutive files must be written fast. The MTWEOFI operation can be used to
-write the filemarks without flushing the drive buffer. Writing filemark at
-close() is always flushing the drive buffers. However, if the previous
-operation is MTWEOFI, close() does not write a filemark. This can be used if
-the program wants to close/open the tape device between files and wants to
-skip waiting.
-
-If rewind, offline, bsf, or seek is done and previous tape operation was
-write, a filemark is written before moving tape.
-
-The compile options are defined in the file linux/drivers/scsi/st_options.h.
-
-4. If the open option O_NONBLOCK is used, open succeeds even if the
-drive is not ready. If O_NONBLOCK is not used, the driver waits for
-the drive to become ready. If this does not happen in ST_BLOCK_SECONDS
-seconds, open fails with the errno value EIO. With O_NONBLOCK the
-device can be opened for writing even if there is a write protected
-tape in the drive (commands trying to write something return error if
-attempted).
-
-
-MINOR NUMBERS
-
-The tape driver currently supports up to 2^17 drives if 4 modes for
-each drive are used.
-
-The minor numbers consist of the following bit fields:
-
-dev_upper non-rew mode dev-lower
-  20 -  8     7    6 5  4      0
-The non-rewind bit is always bit 7 (the uppermost bit in the lowermost
-byte). The bits defining the mode are below the non-rewind bit. The
-remaining bits define the tape device number. This numbering is
-backward compatible with the numbering used when the minor number was
-only 8 bits wide.
-
-
-SYSFS SUPPORT
-
-The driver creates the directory /sys/class/scsi_tape and populates it with
-directories corresponding to the existing tape devices. There are autorewind
-and non-rewind entries for each mode. The names are stxy and nstxy, where x
-is the tape number and y a character corresponding to the mode (none, l, m,
-a). For example, the directories for the first tape device are (assuming four
-modes): st0  nst0  st0l  nst0l  st0m  nst0m  st0a  nst0a.
-
-Each directory contains the entries: default_blksize  default_compression
-default_density  defined  dev  device  driver. The file 'defined' contains 1
-if the mode is defined and zero if not defined. The files 'default_*' contain
-the defaults set by the user. The value -1 means the default is not set. The
-file 'dev' contains the device numbers corresponding to this device. The links
-'device' and 'driver' point to the SCSI device and driver entries.
-
-Each directory also contains the entry 'options' which shows the currently
-enabled driver and mode options. The value in the file is a bit mask where the
-bit definitions are the same as those used with MTSETDRVBUFFER in setting the
-options.
-
-A link named 'tape' is made from the SCSI device directory to the class
-directory corresponding to the mode 0 auto-rewind device (e.g., st0). 
-
-
-SYSFS AND STATISTICS FOR TAPE DEVICES
-
-The st driver maintains statistics for tape drives inside the sysfs filesystem.
-The following method can be used to locate the statistics that are
-available (assuming that sysfs is mounted at /sys):
-
-1. Use opendir(3) on the directory /sys/class/scsi_tape
-2. Use readdir(3) to read the directory contents
-3. Use regcomp(3)/regexec(3) to match directory entries to the extended
-        regular expression "^st[0-9]+$"
-4. Access the statistics from the /sys/class/scsi_tape/<match>/stats
-        directory (where <match> is a directory entry from /sys/class/scsi_tape
-        that matched the extended regular expression)
-
-The reason for using this approach is that all the character devices
-pointing to the same tape drive use the same statistics. That means
-that st0 would have the same statistics as nst0.
-
-The directory contains the following statistics files:
-
-1.  in_flight - The number of I/Os currently outstanding to this device.
-2.  io_ns - The amount of time spent waiting (in nanoseconds) for all I/O
-        to complete (including read and write). This includes tape movement
-        commands such as seeking between file or set marks and implicit tape
-        movement such as when rewind on close tape devices are used.
-3.  other_cnt - The number of I/Os issued to the tape drive other than read or
-        write commands. The time taken to complete these commands uses the
-        following calculation io_ms-read_ms-write_ms.
-4.  read_byte_cnt - The number of bytes read from the tape drive.
-5.  read_cnt - The number of read requests issued to the tape drive.
-6.  read_ns - The amount of time (in nanoseconds) spent waiting for read
-        requests to complete.
-7.  write_byte_cnt - The number of bytes written to the tape drive.
-8.  write_cnt - The number of write requests issued to the tape drive.
-9.  write_ns - The amount of time (in nanoseconds) spent waiting for write
-        requests to complete.
-10. resid_cnt - The number of times during a read or write we found
-	the residual amount to be non-zero. This should mean that a program
-	is issuing a read larger thean the block size on tape. For write
-	not all data made it to tape.
-
-Note: The in_flight value is incremented when an I/O starts the I/O
-itself is not added to the statistics until it completes.
-
-The total of read_cnt, write_cnt, and other_cnt may not total to the same
-value as iodone_cnt at the device level. The tape statistics only count
-I/O issued via the st module.
-
-When read the statistics may not be temporally consistent while I/O is in
-progress. The individual values are read and written to atomically however
-when reading them back via sysfs they may be in the process of being
-updated when starting an I/O or when it is completed.
-
-The value shown in in_flight is incremented before any statstics are
-updated and decremented when an I/O completes after updating statistics.
-The value of in_flight is 0 when there are no I/Os outstanding that are
-issued by the st driver. Tape statistics do not take into account any
-I/O performed via the sg device.
-
-BSD AND SYS V SEMANTICS
-
-The user can choose between these two behaviours of the tape driver by
-defining the value of the symbol ST_SYSV. The semantics differ when a
-file being read is closed. The BSD semantics leaves the tape where it
-currently is whereas the SYS V semantics moves the tape past the next
-filemark unless the filemark has just been crossed.
-
-The default is BSD semantics.
-
-
-BUFFERING
-
-The driver tries to do transfers directly to/from user space. If this
-is not possible, a driver buffer allocated at run-time is used. If
-direct i/o is not possible for the whole transfer, the driver buffer
-is used (i.e., bounce buffers for individual pages are not
-used). Direct i/o can be impossible because of several reasons, e.g.:
-- one or more pages are at addresses not reachable by the HBA
-- the number of pages in the transfer exceeds the number of
-  scatter/gather segments permitted by the HBA
-- one or more pages can't be locked into memory (should not happen in
-  any reasonable situation)
-
-The size of the driver buffers is always at least one tape block. In fixed
-block mode, the minimum buffer size is defined (in 1024 byte units) by
-ST_FIXED_BUFFER_BLOCKS. With small block size this allows buffering of
-several blocks and using one SCSI read or write to transfer all of the
-blocks. Buffering of data across write calls in fixed block mode is
-allowed if ST_BUFFER_WRITES is non-zero and direct i/o is not used.
-Buffer allocation uses chunks of memory having sizes 2^n * (page
-size). Because of this the actual buffer size may be larger than the
-minimum allowable buffer size.
-
-NOTE that if direct i/o is used, the small writes are not buffered. This may
-cause a surprise when moving from 2.4. There small writes (e.g., tar without
--b option) may have had good throughput but this is not true any more with
-2.6. Direct i/o can be turned off to solve this problem but a better solution
-is to use bigger write() byte counts (e.g., tar -b 64).
-
-Asynchronous writing. Writing the buffer contents to the tape is
-started and the write call returns immediately. The status is checked
-at the next tape operation. Asynchronous writes are not done with
-direct i/o and not in fixed block mode.
-
-Buffered writes and asynchronous writes may in some rare cases cause
-problems in multivolume operations if there is not enough space on the
-tape after the early-warning mark to flush the driver buffer.
-
-Read ahead for fixed block mode (ST_READ_AHEAD). Filling the buffer is
-attempted even if the user does not want to get all of the data at
-this read command. Should be disabled for those drives that don't like
-a filemark to truncate a read request or that don't like backspacing.
-
-Scatter/gather buffers (buffers that consist of chunks non-contiguous
-in the physical memory) are used if contiguous buffers can't be
-allocated. To support all SCSI adapters (including those not
-supporting scatter/gather), buffer allocation is using the following
-three kinds of chunks:
-1. The initial segment that is used for all SCSI adapters including
-those not supporting scatter/gather. The size of this buffer will be
-(PAGE_SIZE << ST_FIRST_ORDER) bytes if the system can give a chunk of
-this size (and it is not larger than the buffer size specified by
-ST_BUFFER_BLOCKS). If this size is not available, the driver halves
-the size and tries again until the size of one page. The default
-settings in st_options.h make the driver to try to allocate all of the
-buffer as one chunk.
-2. The scatter/gather segments to fill the specified buffer size are
-allocated so that as many segments as possible are used but the number
-of segments does not exceed ST_FIRST_SG.
-3. The remaining segments between ST_MAX_SG (or the module parameter
-max_sg_segs) and the number of segments used in phases 1 and 2
-are used to extend the buffer at run-time if this is necessary. The
-number of scatter/gather segments allowed for the SCSI adapter is not
-exceeded if it is smaller than the maximum number of scatter/gather
-segments specified. If the maximum number allowed for the SCSI adapter
-is smaller than the number of segments used in phases 1 and 2,
-extending the buffer will always fail.
-
-
-EOM BEHAVIOUR WHEN WRITING
-
-When the end of medium early warning is encountered, the current write
-is finished and the number of bytes is returned. The next write
-returns -1 and errno is set to ENOSPC. To enable writing a trailer,
-the next write is allowed to proceed and, if successful, the number of
-bytes is returned. After this, -1 and the number of bytes are
-alternately returned until the physical end of medium (or some other
-error) is encountered.
-
-
-MODULE PARAMETERS
-
-The buffer size, write threshold, and the maximum number of allocated buffers
-are configurable when the driver is loaded as a module. The keywords are:
-
-buffer_kbs=xxx             the buffer size for fixed block mode is set
-			   to xxx kilobytes
-write_threshold_kbs=xxx    the write threshold in kilobytes set to xxx
-max_sg_segs=xxx		   the maximum number of scatter/gather
-			   segments
-try_direct_io=x		   try direct transfer between user buffer and
-			   tape drive if this is non-zero
-
-Note that if the buffer size is changed but the write threshold is not
-set, the write threshold is set to the new buffer size - 2 kB.
-
-
-BOOT TIME CONFIGURATION
-
-If the driver is compiled into the kernel, the same parameters can be
-also set using, e.g., the LILO command line. The preferred syntax is
-to use the same keyword used when loading as module but prepended
-with 'st.'. For instance, to set the maximum number of scatter/gather
-segments, the parameter 'st.max_sg_segs=xx' should be used (xx is the
-number of scatter/gather segments).
-
-For compatibility, the old syntax from early 2.5 and 2.4 kernel
-versions is supported. The same keywords can be used as when loading
-the driver as module. If several parameters are set, the keyword-value
-pairs are separated with a comma (no spaces allowed). A colon can be
-used instead of the equal mark. The definition is prepended by the
-string st=. Here is an example:
-
-	st=buffer_kbs:64,write_threshold_kbs:60
-
-The following syntax used by the old kernel versions is also supported:
-
-           st=aa[,bb[,dd]]
-
-where
-  aa is the buffer size for fixed block mode in 1024 byte units
-  bb is the write threshold in 1024 byte units
-  dd is the maximum number of scatter/gather segments
-
-
-IOCTLS
-
-The tape is positioned and the drive parameters are set with ioctls
-defined in mtio.h The tape control program 'mt' uses these ioctls. Try
-to find an mt that supports all of the Linux SCSI tape ioctls and
-opens the device for writing if the tape contents will be modified
-(look for a package mt-st* from the Linux ftp sites; the GNU mt does
-not open for writing for, e.g., erase).
-
-The supported ioctls are:
-
-The following use the structure mtop:
-
-MTFSF   Space forward over count filemarks. Tape positioned after filemark.
-MTFSFM  As above but tape positioned before filemark.
-MTBSF	Space backward over count filemarks. Tape positioned before
-        filemark.
-MTBSFM  As above but ape positioned after filemark.
-MTFSR   Space forward over count records.
-MTBSR   Space backward over count records.
-MTFSS   Space forward over count setmarks.
-MTBSS   Space backward over count setmarks.
-MTWEOF  Write count filemarks.
-MTWEOFI	Write count filemarks with immediate bit set (i.e., does not
-	wait until data is on tape)
-MTWSM   Write count setmarks.
-MTREW   Rewind tape.
-MTOFFL  Set device off line (often rewind plus eject).
-MTNOP   Do nothing except flush the buffers.
-MTRETEN Re-tension tape.
-MTEOM   Space to end of recorded data.
-MTERASE Erase tape. If the argument is zero, the short erase command
-	is used. The long erase command is used with all other values
-	of the argument.
-MTSEEK	Seek to tape block count. Uses Tandberg-compatible seek (QFA)
-        for SCSI-1 drives and SCSI-2 seek for SCSI-2 drives. The file and
-	block numbers in the status are not valid after a seek.
-MTSETBLK Set the drive block size. Setting to zero sets the drive into
-        variable block mode (if applicable).
-MTSETDENSITY Sets the drive density code to arg. See drive
-        documentation for available codes.
-MTLOCK and MTUNLOCK Explicitly lock/unlock the tape drive door.
-MTLOAD and MTUNLOAD Explicitly load and unload the tape. If the
-	command argument x is between MT_ST_HPLOADER_OFFSET + 1 and
-	MT_ST_HPLOADER_OFFSET + 6, the number x is used sent to the
-	drive with the command and it selects the tape slot to use of
-	HP C1553A changer.
-MTCOMPRESSION Sets compressing or uncompressing drive mode using the
-	SCSI mode page 15. Note that some drives other methods for
-	control of compression. Some drives (like the Exabytes) use
-	density codes for compression control. Some drives use another
-	mode page but this page has not been implemented in the
-	driver. Some drives without compression capability will accept
-	any compression mode without error.
-MTSETPART Moves the tape to the partition given by the argument at the
-	next tape operation. The block at which the tape is positioned
-	is the block where the tape was previously positioned in the
-	new active partition unless the next tape operation is
-	MTSEEK. In this case the tape is moved directly to the block
-	specified by MTSEEK. MTSETPART is inactive unless
-	MT_ST_CAN_PARTITIONS set.
-MTMKPART Formats the tape with one partition (argument zero) or two
-	partitions (argument non-zero). If the argument is positive,
-	it specifies the size of partition 1 in megabytes. For DDS
-	drives and several early drives this is the physically first
-	partition of the tape. If the argument is negative, its absolute
-	value specifies the size of partition 0 in megabytes. This is
-	the physically first partition of many later drives, like the
-	LTO drives from LTO-5 upwards. The drive has to support partitions
-	with size specified by the initiator. Inactive unless
-	MT_ST_CAN_PARTITIONS set.
-MTSETDRVBUFFER
-	Is used for several purposes. The command is obtained from count
-        with mask MT_SET_OPTIONS, the low order bits are used as argument.
-	This command is only allowed for the superuser (root). The
-	subcommands are:
-	0
-           The drive buffer option is set to the argument. Zero means
-           no buffering.
-        MT_ST_BOOLEANS
-           Sets the buffering options. The bits are the new states
-           (enabled/disabled) the following options (in the
-	   parenthesis is specified whether the option is global or
-	   can be specified differently for each mode):
-	     MT_ST_BUFFER_WRITES write buffering (mode)
-	     MT_ST_ASYNC_WRITES asynchronous writes (mode)
-             MT_ST_READ_AHEAD  read ahead (mode)
-             MT_ST_TWO_FM writing of two filemarks (global)
-	     MT_ST_FAST_EOM using the SCSI spacing to EOD (global)
-	     MT_ST_AUTO_LOCK automatic locking of the drive door (global)
-             MT_ST_DEF_WRITES the defaults are meant only for writes (mode)
-	     MT_ST_CAN_BSR backspacing over more than one records can
-		be used for repositioning the tape (global)
-	     MT_ST_NO_BLKLIMS the driver does not ask the block limits
-		from the drive (block size can be changed only to
-		variable) (global)
-	     MT_ST_CAN_PARTITIONS enables support for partitioned
-		tapes (global)
-	     MT_ST_SCSI2LOGICAL the logical block number is used in
-		the MTSEEK and MTIOCPOS for SCSI-2 drives instead of
-		the device dependent address. It is recommended to set
-		this flag unless there are tapes using the device
-		dependent (from the old times) (global)
-	     MT_ST_SYSV sets the SYSV semantics (mode)
-	     MT_ST_NOWAIT enables immediate mode (i.e., don't wait for
-	        the command to finish) for some commands (e.g., rewind)
-	     MT_ST_NOWAIT_EOF enables immediate filemark mode (i.e. when
-	        writing a filemark, don't wait for it to complete). Please
-		see the BASICS note about MTWEOFI with respect to the
-		possible dangers of writing immediate filemarks.
-	     MT_ST_SILI enables setting the SILI bit in SCSI commands when
-		reading in variable block mode to enhance performance when
-		reading blocks shorter than the byte count; set this only
-		if you are sure that the drive supports SILI and the HBA
-		correctly returns transfer residuals
-	     MT_ST_DEBUGGING debugging (global; debugging must be
-		compiled into the driver)
-	MT_ST_SETBOOLEANS
-	MT_ST_CLEARBOOLEANS
-	   Sets or clears the option bits.
-        MT_ST_WRITE_THRESHOLD
-           Sets the write threshold for this device to kilobytes
-           specified by the lowest bits.
-	MT_ST_DEF_BLKSIZE
-	   Defines the default block size set automatically. Value
-	   0xffffff means that the default is not used any more.
-	MT_ST_DEF_DENSITY
-	MT_ST_DEF_DRVBUFFER
-	   Used to set or clear the density (8 bits), and drive buffer
-	   state (3 bits). If the value is MT_ST_CLEAR_DEFAULT
-	   (0xfffff) the default will not be used any more. Otherwise
-	   the lowermost bits of the value contain the new value of
-	   the parameter.
-	MT_ST_DEF_COMPRESSION
-	   The compression default will not be used if the value of
-	   the lowermost byte is 0xff. Otherwise the lowermost bit
-	   contains the new default. If the bits 8-15 are set to a
-	   non-zero number, and this number is not 0xff, the number is
-	   used as the compression algorithm. The value
-	   MT_ST_CLEAR_DEFAULT can be used to clear the compression
-	   default.
-	MT_ST_SET_TIMEOUT
-	   Set the normal timeout in seconds for this device. The
-	   default is 900 seconds (15 minutes). The timeout should be
-	   long enough for the retries done by the device while
-	   reading/writing.
-	MT_ST_SET_LONG_TIMEOUT
-	   Set the long timeout that is used for operations that are
-	   known to take a long time. The default is 14000 seconds
-	   (3.9 hours). For erase this value is further multiplied by
-	   eight.
-	MT_ST_SET_CLN
-	   Set the cleaning request interpretation parameters using
-	   the lowest 24 bits of the argument. The driver can set the
-	   generic status bit GMT_CLN if a cleaning request bit pattern
-	   is found from the extended sense data. Many drives set one or
-	   more bits in the extended sense data when the drive needs
-	   cleaning. The bits are device-dependent. The driver is
-	   given the number of the sense data byte (the lowest eight
-	   bits of the argument; must be >= 18 (values 1 - 17
-	   reserved) and <= the maximum requested sense data sixe), 
-	   a mask to select the relevant bits (the bits 9-16), and the
-	   bit pattern (bits 17-23). If the bit pattern is zero, one
-	   or more bits under the mask indicate cleaning request. If
-	   the pattern is non-zero, the pattern must match the masked
-	   sense data byte.
-
-	   (The cleaning bit is set if the additional sense code and
-	   qualifier 00h 17h are seen regardless of the setting of
-	   MT_ST_SET_CLN.)
-
-The following ioctl uses the structure mtpos:
-MTIOCPOS Reads the current position from the drive. Uses
-        Tandberg-compatible QFA for SCSI-1 drives and the SCSI-2
-        command for the SCSI-2 drives.
-
-The following ioctl uses the structure mtget to return the status:
-MTIOCGET Returns some status information.
-        The file number and block number within file are returned. The
-        block is -1 when it can't be determined (e.g., after MTBSF).
-        The drive type is either MTISSCSI1 or MTISSCSI2.
-        The number of recovered errors since the previous status call
-        is stored in the lower word of the field mt_erreg.
-        The current block size and the density code are stored in the field
-        mt_dsreg (shifts for the subfields are MT_ST_BLKSIZE_SHIFT and
-        MT_ST_DENSITY_SHIFT).
-	The GMT_xxx status bits reflect the drive status. GMT_DR_OPEN
-	is set if there is no tape in the drive. GMT_EOD means either
-	end of recorded data or end of tape. GMT_EOT means end of tape.
-
-
-MISCELLANEOUS COMPILE OPTIONS
-
-The recovered write errors are considered fatal if ST_RECOVERED_WRITE_FATAL
-is defined.
-
-The maximum number of tape devices is determined by the define
-ST_MAX_TAPES. If more tapes are detected at driver initialization, the
-maximum is adjusted accordingly.
-
-Immediate return from tape positioning SCSI commands can be enabled by
-defining ST_NOWAIT. If this is defined, the user should take care that
-the next tape operation is not started before the previous one has
-finished. The drives and SCSI adapters should handle this condition
-gracefully, but some drive/adapter combinations are known to hang the
-SCSI bus in this case.
-
-The MTEOM command is by default implemented as spacing over 32767
-filemarks. With this method the file number in the status is
-correct. The user can request using direct spacing to EOD by setting
-ST_FAST_EOM 1 (or using the MT_ST_OPTIONS ioctl). In this case the file
-number will be invalid.
-
-When using read ahead or buffered writes the position within the file
-may not be correct after the file is closed (correct position may
-require backspacing over more than one record). The correct position
-within file can be obtained if ST_IN_FILE_POS is defined at compile
-time or the MT_ST_CAN_BSR bit is set for the drive with an ioctl.
-(The driver always backs over a filemark crossed by read ahead if the
-user does not request data that far.)
-
-
-DEBUGGING HINTS
-
-Debugging code is now compiled in by default but debugging is turned off
-with the kernel module parameter debug_flag defaulting to 0.  Debugging
-can still be switched on and off with an ioctl.  To enable debug at
-module load time add debug_flag=1 to the module load options, the
-debugging output is not voluminous. Debugging can also be enabled
-and disabled by writing a '0' (disable) or '1' (enable) to the sysfs
-file /sys/bus/scsi/drivers/st/debug_flag.
-
-If the tape seems to hang, I would be very interested to hear where
-the driver is waiting. With the command 'ps -l' you can see the state
-of the process using the tape. If the state is D, the process is
-waiting for something. The field WCHAN tells where the driver is
-waiting. If you have the current System.map in the correct place (in
-/boot for the procps I use) or have updated /etc/psdatabase (for kmem
-ps), ps writes the function name in the WCHAN field. If not, you have
-to look up the function from System.map.
-
-Note also that the timeouts are very long compared to most other
-drivers. This means that the Linux driver may appear hung although the
-real reason is that the tape firmware has got confused.
diff --git a/Documentation/scsi/sym53c500_cs.rst b/Documentation/scsi/sym53c500_cs.rst
new file mode 100644
index 0000000..5546486
--- /dev/null
+++ b/Documentation/scsi/sym53c500_cs.rst
@@ -0,0 +1,29 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=======================
+The sym53c500_cs Driver
+=======================
+
+The sym53c500_cs driver originated as an add-on to David Hinds' pcmcia-cs
+package, and was written by Tom Corner (tcorner@via.at).  A rewrite was
+long overdue, and the current version addresses the following concerns:
+
+	(1) extensive kernel changes between 2.4 and 2.6.
+	(2) deprecated PCMCIA support outside the kernel.
+
+All the USE_BIOS code has been ripped out.  It was never used, and could
+not have worked anyway.  The USE_DMA code is likewise gone.  Many thanks
+to YOKOTA Hiroshi (nsp_cs driver) and David Hinds (qlogic_cs driver) for
+the code fragments I shamelessly adapted for this work.  Thanks also to
+Christoph Hellwig for his patient tutelage while I stumbled about.
+
+The Symbios Logic 53c500 chip was used in the "newer" (circa 1997) version
+of the New Media Bus Toaster PCMCIA SCSI controller.  Presumably there are
+other products using this chip, but I've never laid eyes (much less hands)
+on one.
+
+Through the years, there have been a number of downloads of the pcmcia-cs
+version of this driver, and I guess it worked for those users.  It worked
+for Tom Corner, and it works for me.  Your mileage will probably vary.
+
+Bob Tracy (rct@frus.com)
diff --git a/Documentation/scsi/sym53c500_cs.txt b/Documentation/scsi/sym53c500_cs.txt
deleted file mode 100644
index 75febcf..0000000
--- a/Documentation/scsi/sym53c500_cs.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-The sym53c500_cs driver originated as an add-on to David Hinds' pcmcia-cs
-package, and was written by Tom Corner (tcorner@via.at).  A rewrite was
-long overdue, and the current version addresses the following concerns:
-
-	(1) extensive kernel changes between 2.4 and 2.6.
-	(2) deprecated PCMCIA support outside the kernel.
-
-All the USE_BIOS code has been ripped out.  It was never used, and could
-not have worked anyway.  The USE_DMA code is likewise gone.  Many thanks
-to YOKOTA Hiroshi (nsp_cs driver) and David Hinds (qlogic_cs driver) for
-the code fragments I shamelessly adapted for this work.  Thanks also to
-Christoph Hellwig for his patient tutelage while I stumbled about.
-
-The Symbios Logic 53c500 chip was used in the "newer" (circa 1997) version
-of the New Media Bus Toaster PCMCIA SCSI controller.  Presumably there are
-other products using this chip, but I've never laid eyes (much less hands)
-on one.
-
-Through the years, there have been a number of downloads of the pcmcia-cs
-version of this driver, and I guess it worked for those users.  It worked
-for Tom Corner, and it works for me.  Your mileage will probably vary.
-
---Bob Tracy (rct@frus.com)
diff --git a/Documentation/scsi/sym53c8xx_2.rst b/Documentation/scsi/sym53c8xx_2.rst
new file mode 100644
index 0000000..8de44a7
--- /dev/null
+++ b/Documentation/scsi/sym53c8xx_2.rst
@@ -0,0 +1,1209 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================================
+The Linux SYM-2 driver documentation file
+=========================================
+
+Written by Gerard Roudier <groudier@free.fr>
+
+21 Rue Carnot
+
+95170 DEUIL LA BARRE - FRANCE
+
+Updated by Matthew Wilcox <matthew@wil.cx>
+
+2004-10-09
+
+.. Contents
+
+   1.  Introduction
+   2.  Supported chips and SCSI features
+   3.  Advantages of this driver for newer chips.
+         3.1 Optimized SCSI SCRIPTS
+         3.2 New features appeared with the SYM53C896
+   4.  Memory mapped I/O versus normal I/O
+   5.  Tagged command queueing
+   6.  Parity checking
+   7.  Profiling information
+   8.  Control commands
+         8.1  Set minimum synchronous period
+         8.2  Set wide size
+         8.3  Set maximum number of concurrent tagged commands
+         8.4  Set debug mode
+         8.5  Set flag (no_disc)
+         8.6  Set verbose level
+         8.7  Reset all logical units of a target
+         8.8  Abort all tasks of all logical units of a target
+   9.  Configuration parameters
+   10. Boot setup commands
+         10.1 Syntax
+         10.2 Available arguments
+                10.2.1  Default number of tagged commands
+                10.2.2  Burst max
+                10.2.3  LED support
+                10.2.4  Differential mode
+                10.2.5  IRQ mode
+                10.2.6  Check SCSI BUS
+                10.2.7  Suggest a default SCSI id for hosts
+                10.2.8  Verbosity level
+                10.2.9  Debug mode
+                10.2.10 Settle delay
+                10.2.11 Serial NVRAM
+                10.2.12 Exclude a host from being attached
+         10.3 Converting from old options
+         10.4 SCSI BUS checking boot option
+   11. SCSI problem troubleshooting
+         15.1 Problem tracking
+         15.2 Understanding hardware error reports
+   12. Serial NVRAM support (by Richard Waltham)
+         17.1 Features
+         17.2 Symbios NVRAM layout
+         17.3 Tekram  NVRAM layout
+
+
+1. Introduction
+===============
+
+This driver supports the whole SYM53C8XX family of PCI-SCSI controllers.
+It also support the subset of LSI53C10XX PCI-SCSI controllers that are based
+on the SYM53C8XX SCRIPTS language.
+
+It replaces the sym53c8xx+ncr53c8xx driver bundle and shares its core code
+with the FreeBSD SYM-2 driver. The 'glue' that allows this driver to work
+under Linux is contained in 2 files named sym_glue.h and sym_glue.c.
+Other drivers files are intended not to depend on the Operating System
+on which the driver is used.
+
+The history of this driver can be summarized as follows:
+
+1993: ncr driver written for 386bsd and FreeBSD by:
+
+          - Wolfgang Stanglmeier        <wolf@cologne.de>
+          - Stefan Esser                <se@mi.Uni-Koeln.de>
+
+1996: port of the ncr driver to Linux-1.2.13 and rename it ncr53c8xx.
+
+          - Gerard Roudier
+
+1998: new sym53c8xx driver for Linux based on LOAD/STORE instruction and that
+      adds full support for the 896 but drops support for early NCR devices.
+
+          - Gerard Roudier
+
+1999: port of the sym53c8xx driver to FreeBSD and support for the LSI53C1010
+      33 MHz and 66MHz Ultra-3 controllers. The new driver is named 'sym'.
+
+          - Gerard Roudier
+
+2000: Add support for early NCR devices to FreeBSD 'sym' driver.
+      Break the driver into several sources and separate the OS glue
+      code from the core code that can be shared among different O/Ses.
+      Write a glue code for Linux.
+
+          - Gerard Roudier
+
+2004: Remove FreeBSD compatibility code.  Remove support for versions of
+      Linux before 2.6.  Start using Linux facilities.
+
+This README file addresses the Linux version of the driver. Under FreeBSD,
+the driver documentation is the sym.8 man page.
+
+Information about new chips is available at LSILOGIC web server:
+
+          http://www.lsilogic.com/
+
+SCSI standard documentations are available at T10 site:
+
+          http://www.t10.org/
+
+Useful SCSI tools written by Eric Youngdale are part of most Linux
+distributions:
+
+   ============ ==========================
+   scsiinfo     command line tool
+   scsi-config  TCL/Tk tool using scsiinfo
+   ============ ==========================
+
+2. Supported chips and SCSI features
+====================================
+
+The following features are supported for all chips:
+
+	- Synchronous negotiation
+	- Disconnection
+	- Tagged command queuing
+	- SCSI parity checking
+	- PCI Master parity checking
+
+Other features depends on chip capabilities.
+
+The driver notably uses optimized SCRIPTS for devices that support
+LOAD/STORE and handles PHASE MISMATCH from SCRIPTS for devices that
+support the corresponding feature.
+
+The following table shows some characteristics of the chip family.
+
++--------+-----------+-----+-----------+------------+------------+---------+
+|        |           |     |           |            |Load/store  |Hardware |
+|        |On board   |     |           |            |scripts     |phase    |
+|Chip    |SDMS BIOS  |Wide |SCSI std.  | Max. sync  |            |mismatch |
++--------+-----------+-----+-----------+------------+------------+---------+
+|810     |     N     |  N  | FAST10    | 10 MB/s    |      N     |    N    |
++--------+-----------+-----+-----------+------------+------------+---------+
+|810A    |     N     |  N  | FAST10    | 10 MB/s    |      Y     |    N    |
++--------+-----------+-----+-----------+------------+------------+---------+
+|815     |     Y     |  N  | FAST10    | 10 MB/s    |      N     |    N    |
++--------+-----------+-----+-----------+------------+------------+---------+
+|825     |     Y     |  Y  | FAST10    | 20 MB/s    |      N     |    N    |
++--------+-----------+-----+-----------+------------+------------+---------+
+|825A    |     Y     |  Y  | FAST10    | 20 MB/s    |      Y     |    N    |
++--------+-----------+-----+-----------+------------+------------+---------+
+|860     |     N     |  N  | FAST20    | 20 MB/s    |      Y     |    N    |
++--------+-----------+-----+-----------+------------+------------+---------+
+|875     |     Y     |  Y  | FAST20    | 40 MB/s    |      Y     |    N    |
++--------+-----------+-----+-----------+------------+------------+---------+
+|875A    |     Y     |  Y  | FAST20    | 40 MB/s    |      Y     |    Y    |
++--------+-----------+-----+-----------+------------+------------+---------+
+|876     |     Y     |  Y  | FAST20    | 40 MB/s    |      Y     |    N    |
++--------+-----------+-----+-----------+------------+------------+---------+
+|895     |     Y     |  Y  | FAST40    | 80 MB/s    |      Y     |    N    |
++--------+-----------+-----+-----------+------------+------------+---------+
+|895A    |     Y     |  Y  | FAST40    | 80 MB/s    |      Y     |    Y    |
++--------+-----------+-----+-----------+------------+------------+---------+
+|896     |     Y     |  Y  | FAST40    | 80 MB/s    |      Y     |    Y    |
++--------+-----------+-----+-----------+------------+------------+---------+
+|897     |     Y     |  Y  | FAST40    | 80 MB/s    |      Y     |    Y    |
++--------+-----------+-----+-----------+------------+------------+---------+
+|1510D   |     Y     |  Y  | FAST40    | 80 MB/s    |      Y     |    Y    |
++--------+-----------+-----+-----------+------------+------------+---------+
+|1010    |     Y     |  Y  | FAST80    |160 MB/s    |      Y     |    Y    |
++--------+-----------+-----+-----------+------------+------------+---------+
+|1010_66 |     Y     |  Y  | FAST80    |160 MB/s    |      Y     |    Y    |
+|[1]_    |           |     |           |            |            |         |
++--------+-----------+-----+-----------+------------+------------+---------+
+
+.. [1] Chip supports 33MHz and 66MHz PCI bus clock.
+
+
+Summary of other supported features:
+
+:Module:                allow to load the driver
+:Memory mapped I/O:     increases performance
+:Control commands:      write operations to the proc SCSI file system
+:Debugging information: written to syslog (expert only)
+:Serial NVRAM:          Symbios and Tekram formats
+
+- Scatter / gather
+- Shared interrupt
+- Boot setup commands
+
+
+3. Advantages of this driver for newer chips.
+=============================================
+
+3.1 Optimized SCSI SCRIPTS
+--------------------------
+
+All chips except the 810, 815 and 825, support new SCSI SCRIPTS instructions
+named LOAD and STORE that allow to move up to 1 DWORD from/to an IO register
+to/from memory much faster that the MOVE MEMORY instruction that is supported
+by the 53c7xx and 53c8xx family.
+
+The LOAD/STORE instructions support absolute and DSA relative addressing
+modes. The SCSI SCRIPTS had been entirely rewritten using LOAD/STORE instead
+of MOVE MEMORY instructions.
+
+Due to the lack of LOAD/STORE SCRIPTS instructions by earlier chips, this
+driver also incorporates a different SCRIPTS set based on MEMORY MOVE, in
+order to provide support for the entire SYM53C8XX chips family.
+
+3.2 New features appeared with the SYM53C896
+--------------------------------------------
+
+Newer chips (see above) allows handling of the phase mismatch context from
+SCRIPTS (avoids the phase mismatch interrupt that stops the SCSI processor
+until the C code has saved the context of the transfer).
+
+The 896 and 1010 chips support 64 bit PCI transactions and addressing,
+while the 895A supports 32 bit PCI transactions and 64 bit addressing.
+The SCRIPTS processor of these chips is not true 64 bit, but uses segment
+registers for bit 32-63. Another interesting feature is that LOAD/STORE
+instructions that address the on-chip RAM (8k) remain internal to the chip.
+
+4. Memory mapped I/O versus normal I/O
+======================================
+
+Memory mapped I/O has less latency than normal I/O and is the recommended
+way for doing IO with PCI devices. Memory mapped I/O seems to work fine on
+most hardware configurations, but some poorly designed chipsets may break
+this feature. A configuration option is provided for normal I/O to be
+used but the driver defaults to MMIO.
+
+5. Tagged command queueing
+==========================
+
+Queuing more than 1 command at a time to a device allows it to perform
+optimizations based on actual head positions and its mechanical
+characteristics. This feature may also reduce average command latency.
+In order to really gain advantage of this feature, devices must have
+a reasonable cache size (No miracle is to be expected for a low-end
+hard disk with 128 KB or less).
+
+Some known old SCSI devices do not properly support tagged command queuing.
+Generally, firmware revisions that fix this kind of problems are available
+at respective vendor web/ftp sites.
+
+All I can say is that I never have had problem with tagged queuing using
+this driver and its predecessors. Hard disks that behaved correctly for
+me using tagged commands are the following:
+
+- IBM S12 0662
+- Conner 1080S
+- Quantum Atlas I
+- Quantum Atlas II
+- Seagate Cheetah I
+- Quantum Viking II
+- IBM DRVS
+- Quantum Atlas IV
+- Seagate Cheetah II
+
+If your controller has NVRAM, you can configure this feature per target
+from the user setup tool. The Tekram Setup program allows to tune the
+maximum number of queued commands up to 32. The Symbios Setup only allows
+to enable or disable this feature.
+
+The maximum number of simultaneous tagged commands queued to a device
+is currently set to 16 by default.  This value is suitable for most SCSI
+disks.  With large SCSI disks (>= 2GB, cache >= 512KB, average seek time
+<= 10 ms), using a larger value may give better performances.
+
+This driver supports up to 255 commands per device, and but using more than
+64 is generally not worth-while, unless you are using a very large disk or
+disk arrays. It is noticeable that most of recent hard disks seem not to
+accept more than 64 simultaneous commands. So, using more than 64 queued
+commands is probably just resource wasting.
+
+If your controller does not have NVRAM or if it is managed by the SDMS
+BIOS/SETUP, you can configure tagged queueing feature and device queue
+depths from the boot command-line. For example::
+
+  sym53c8xx=tags:4/t2t3q15-t4q7/t1u0q32
+
+will set tagged commands queue depths as follow:
+
+- target 2  all luns  on controller 0 --> 15
+- target 3  all luns  on controller 0 --> 15
+- target 4  all luns  on controller 0 -->  7
+- target 1  lun 0     on controller 1 --> 32
+- all other target/lun                -->  4
+
+In some special conditions, some SCSI disk firmwares may return a
+QUEUE FULL status for a SCSI command. This behaviour is managed by the
+driver using the following heuristic:
+
+- Each time a QUEUE FULL status is returned, tagged queue depth is reduced
+  to the actual number of disconnected commands.
+
+- Every 200 successfully completed SCSI commands, if allowed by the
+  current limit, the maximum number of queueable commands is incremented.
+
+Since QUEUE FULL status reception and handling is resource wasting, the
+driver notifies by default this problem to user by indicating the actual
+number of commands used and their status, as well as its decision on the
+device queue depth change.
+The heuristic used by the driver in handling QUEUE FULL ensures that the
+impact on performances is not too bad. You can get rid of the messages by
+setting verbose level to zero, as follow:
+
+1st method:
+	    boot your system using 'sym53c8xx=verb:0' option.
+2nd method:
+	    apply "setverbose 0" control command to the proc fs entry
+            corresponding to your controller after boot-up.
+
+6. Parity checking
+==================
+
+The driver supports SCSI parity checking and PCI bus master parity
+checking.  These features must be enabled in order to ensure safe
+data transfers.  Some flawed devices or mother boards may have problems
+with parity.  The options to defeat parity checking have been removed
+from the driver.
+
+7. Profiling information
+========================
+
+This driver does not provide profiling information as did its predecessors.
+This feature was not this useful and added complexity to the code.
+As the driver code got more complex, I have decided to remove everything
+that didn't seem actually useful.
+
+8. Control commands
+===================
+
+Control commands can be sent to the driver with write operations to
+the proc SCSI file system. The generic command syntax is the
+following::
+
+      echo "<verb> <parameters>" >/proc/scsi/sym53c8xx/0
+      (assumes controller number is 0)
+
+Using "all" for "<target>" parameter with the commands below will
+apply to all targets of the SCSI chain (except the controller).
+
+Available commands:
+
+8.1 Set minimum synchronous period factor
+-----------------------------------------
+
+    setsync <target> <period factor>
+
+    :target:   target number
+    :period:   minimum synchronous period.
+               Maximum speed = 1000/(4*period factor) except for special
+               cases below.
+
+    Specify a period of 0, to force asynchronous transfer mode.
+
+     -  9 means 12.5 nano-seconds synchronous period
+     - 10 means 25 nano-seconds synchronous period
+     - 11 means 30 nano-seconds synchronous period
+     - 12 means 50 nano-seconds synchronous period
+
+8.2 Set wide size
+-----------------
+
+    setwide <target> <size>
+
+    :target:   target number
+    :size:     0=8 bits, 1=16bits
+
+8.3 Set maximum number of concurrent tagged commands
+----------------------------------------------------
+
+    settags <target> <tags>
+
+    :target:   target number
+    :tags:     number of concurrent tagged commands
+               must not be greater than configured (default: 16)
+
+8.4 Set debug mode
+------------------
+
+    setdebug <list of debug flags>
+
+    Available debug flags:
+
+	======== ========================================================
+        alloc    print info about memory allocations (ccb, lcb)
+        queue    print info about insertions into the command start queue
+        result   print sense data on CHECK CONDITION status
+        scatter  print info about the scatter process
+        scripts  print info about the script binding process
+	tiny     print minimal debugging information
+	timing   print timing information of the NCR chip
+	nego     print information about SCSI negotiations
+	phase    print information on script interruptions
+	======== ========================================================
+
+    Use "setdebug" with no argument to reset debug flags.
+
+
+8.5 Set flag (no_disc)
+----------------------
+
+    setflag <target> <flag>
+
+    :target:    target number
+
+    For the moment, only one flag is available:
+
+        no_disc:   not allow target to disconnect.
+
+    Do not specify any flag in order to reset the flag. For example:
+
+    setflag 4
+      will reset no_disc flag for target 4, so will allow it disconnections.
+    setflag all
+      will allow disconnection for all devices on the SCSI bus.
+
+
+8.6 Set verbose level
+---------------------
+
+    setverbose #level
+
+    The driver default verbose level is 1. This command allows to change
+    th driver verbose level after boot-up.
+
+8.7 Reset all logical units of a target
+---------------------------------------
+
+    resetdev <target>
+
+    :target:    target number
+
+    The driver will try to send a BUS DEVICE RESET message to the target.
+
+8.8 Abort all tasks of all logical units of a target
+----------------------------------------------------
+
+    cleardev <target>
+
+    :target:    target number
+
+    The driver will try to send a ABORT message to all the logical units
+    of the target.
+
+
+9. Configuration parameters
+===========================
+
+Under kernel configuration tools (make menuconfig, for example), it is
+possible to change some default driver configuration parameters.
+If the firmware of all your devices is perfect enough, all the
+features supported by the driver can be enabled at start-up. However,
+if only one has a flaw for some SCSI feature, you can disable the
+support by the driver of this feature at linux start-up and enable
+this feature after boot-up only for devices that support it safely.
+
+Configuration parameters:
+
+Use normal IO                         (default answer: n)
+    Answer "y" if you suspect your mother board to not allow memory mapped I/O.
+    May slow down performance a little.
+
+Default tagged command queue depth    (default answer: 16)
+    Entering 0 defaults to tagged commands not being used.
+    This parameter can be specified from the boot command line.
+
+Maximum number of queued commands     (default answer: 32)
+    This option allows you to specify the maximum number of tagged commands
+    that can be queued to a device. The maximum supported value is 255.
+
+Synchronous transfers frequency       (default answer: 80)
+    This option allows you to specify the frequency in MHz the driver
+    will use at boot time for synchronous data transfer negotiations.
+    0 means "asynchronous data transfers".
+
+10. Boot setup commands
+=======================
+
+10.1 Syntax
+-----------
+
+Setup commands can be passed to the driver either at boot time or as
+parameters to modprobe, as described in Documentation/admin-guide/kernel-parameters.rst
+
+Example of boot setup command under lilo prompt::
+
+    lilo: linux root=/dev/sda2 sym53c8xx.cmd_per_lun=4 sym53c8xx.sync=10 sym53c8xx.debug=0x200
+
+- enable tagged commands, up to 4 tagged commands queued.
+- set synchronous negotiation speed to 10 Mega-transfers / second.
+- set DEBUG_NEGO flag.
+
+The following command will install the driver module with the same
+options as above::
+
+    modprobe sym53c8xx cmd_per_lun=4 sync=10 debug=0x200
+
+10.2 Available arguments
+------------------------
+
+10.2.1  Default number of tagged commands
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+        - cmd_per_lun=0 (or cmd_per_lun=1) tagged command queuing disabled
+        - cmd_per_lun=#tags (#tags > 1) tagged command queuing enabled
+
+  #tags will be truncated to the max queued commands configuration parameter.
+
+10.2.2 Burst max
+^^^^^^^^^^^^^^^^
+
+	========== ======================================================
+        burst=0    burst disabled
+        burst=255  get burst length from initial IO register settings.
+        burst=#x   burst enabled (1<<#x burst transfers max)
+
+		   #x is an integer value which is log base 2 of the burst
+		   transfers max.
+	========== ======================================================
+
+  By default the driver uses the maximum value supported by the chip.
+
+10.2.3 LED support
+^^^^^^^^^^^^^^^^^^
+
+	=====      ===================
+        led=1      enable  LED support
+        led=0      disable LED support
+	=====      ===================
+
+  Do not enable LED support if your scsi board does not use SDMS BIOS.
+  (See 'Configuration parameters')
+
+10.2.4 Differential mode
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+	======	=================================
+	diff=0	never set up diff mode
+        diff=1	set up diff mode if BIOS set it
+        diff=2	always set up diff mode
+        diff=3	set diff mode if GPIO3 is not set
+	======	=================================
+
+10.2.5 IRQ mode
+^^^^^^^^^^^^^^^
+
+	======     ================================================
+        irqm=0     always open drain
+        irqm=1     same as initial settings (assumed BIOS settings)
+        irqm=2     always totem pole
+	======     ================================================
+
+10.2.6 Check SCSI BUS
+^^^^^^^^^^^^^^^^^^^^^
+
+        buschk=<option bits>
+
+    Available option bits:
+
+	===    ================================================
+        0x0    No check.
+        0x1    Check and do not attach the controller on error.
+        0x2    Check and just warn on error.
+	===    ================================================
+
+10.2.7 Suggest a default SCSI id for hosts
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+	==========	==========================================
+        hostid=255	no id suggested.
+        hostid=#x	(0 < x < 7) x suggested for hosts SCSI id.
+	==========	==========================================
+
+    If a host SCSI id is available from the NVRAM, the driver will ignore
+    any value suggested as boot option. Otherwise, if a suggested value
+    different from 255 has been supplied, it will use it. Otherwise, it will
+    try to deduce the value previously set in the hardware and use value
+    7 if the hardware value is zero.
+
+10.2.8  Verbosity level
+^^^^^^^^^^^^^^^^^^^^^^^
+
+	======     ========
+        verb=0     minimal
+        verb=1     normal
+        verb=2     too much
+	======     ========
+
+10.2.9 Debug mode
+^^^^^^^^^^^^^^^^^
+
+	=========   ====================================
+        debug=0	    clear debug flags
+        debug=#x    set debug flags
+
+		    #x is an integer value combining the
+		    following power-of-2 values:
+
+		    =============  ======
+		    DEBUG_ALLOC       0x1
+		    DEBUG_PHASE       0x2
+		    DEBUG_POLL        0x4
+		    DEBUG_QUEUE       0x8
+		    DEBUG_RESULT     0x10
+		    DEBUG_SCATTER    0x20
+		    DEBUG_SCRIPT     0x40
+		    DEBUG_TINY       0x80
+		    DEBUG_TIMING    0x100
+		    DEBUG_NEGO      0x200
+		    DEBUG_TAGS      0x400
+		    DEBUG_FREEZE    0x800
+		    DEBUG_RESTART  0x1000
+		    =============  ======
+	=========   ====================================
+
+  You can play safely with DEBUG_NEGO. However, some of these flags may
+  generate bunches of syslog messages.
+
+10.2.10 Settle delay
+^^^^^^^^^^^^^^^^^^^^
+
+	========	===================
+        settle=n	delay for n seconds
+	========	===================
+
+  After a bus reset, the driver will delay for n seconds before talking
+  to any device on the bus.  The default is 3 seconds and safe mode will
+  default it to 10.
+
+10.2.11 Serial NVRAM
+^^^^^^^^^^^^^^^^^^^^
+
+	.. Note:: option not currently implemented.
+
+	=======     =========================================
+        nvram=n     do not look for serial NVRAM
+        nvram=y     test controllers for onboard serial NVRAM
+	=======     =========================================
+
+        (alternate binary form)
+
+        nvram=<bits options>
+
+        ====   =================================================================
+        0x01   look for NVRAM  (equivalent to nvram=y)
+        0x02   ignore NVRAM "Synchronous negotiation" parameters for all devices
+        0x04   ignore NVRAM "Wide negotiation"  parameter for all devices
+        0x08   ignore NVRAM "Scan at boot time" parameter for all devices
+        0x80   also attach controllers set to OFF in the NVRAM (sym53c8xx only)
+        ====   =================================================================
+
+10.2.12 Exclude a host from being attached
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+        excl=<io_address>,...
+
+    Prevent host at a given io address from being attached.
+    For example 'excl=0xb400,0xc000' indicate to the
+    driver not to attach hosts at address 0xb400 and 0xc000.
+
+10.3 Converting from old style options
+--------------------------------------
+
+Previously, the sym2 driver accepted arguments of the form::
+
+	sym53c8xx=tags:4,sync:10,debug:0x200
+
+As a result of the new module parameters, this is no longer available.
+Most of the options have remained the same, but tags has become
+cmd_per_lun to reflect its different purposes.  The sample above would
+be specified as::
+
+	modprobe sym53c8xx cmd_per_lun=4 sync=10 debug=0x200
+
+or on the kernel boot line as::
+
+	sym53c8xx.cmd_per_lun=4 sym53c8xx.sync=10 sym53c8xx.debug=0x200
+
+10.4 SCSI BUS checking boot option
+----------------------------------
+
+When this option is set to a non-zero value, the driver checks SCSI lines
+logic state, 100 micro-seconds after having asserted the SCSI RESET line.
+The driver just reads SCSI lines and checks all lines read FALSE except RESET.
+Since SCSI devices shall release the BUS at most 800 nano-seconds after SCSI
+RESET has been asserted, any signal to TRUE may indicate a SCSI BUS problem.
+Unfortunately, the following common SCSI BUS problems are not detected:
+
+- Only 1 terminator installed.
+- Misplaced terminators.
+- Bad quality terminators.
+
+On the other hand, either bad cabling, broken devices, not conformant
+devices, ... may cause a SCSI signal to be wrong when te driver reads it.
+
+15. SCSI problem troubleshooting
+================================
+
+15.1 Problem tracking
+---------------------
+
+Most SCSI problems are due to a non conformant SCSI bus or too buggy
+devices.  If unfortunately you have SCSI problems, you can check the
+following things:
+
+- SCSI bus cables
+- terminations at both end of the SCSI chain
+- linux syslog messages (some of them may help you)
+
+If you do not find the source of problems, you can configure the
+driver or devices in the NVRAM with minimal features.
+
+- only asynchronous data transfers
+- tagged commands disabled
+- disconnections not allowed
+
+Now, if your SCSI bus is ok, your system has every chance to work
+with this safe configuration but performances will not be optimal.
+
+If it still fails, then you can send your problem description to
+appropriate mailing lists or news-groups.  Send me a copy in order to
+be sure I will receive it.  Obviously, a bug in the driver code is
+possible.
+
+  My current email address: Gerard Roudier <groudier@free.fr>
+
+Allowing disconnections is important if you use several devices on
+your SCSI bus but often causes problems with buggy devices.
+Synchronous data transfers increases throughput of fast devices like
+hard disks.  Good SCSI hard disks with a large cache gain advantage of
+tagged commands queuing.
+
+15.2 Understanding hardware error reports
+-----------------------------------------
+
+When the driver detects an unexpected error condition, it may display a
+message of the following pattern::
+
+    sym0:1: ERROR (0:48) (1-21-65) (f/95/0) @ (script 7c0:19000000).
+    sym0: script cmd = 19000000
+    sym0: regdump: da 10 80 95 47 0f 01 07 75 01 81 21 80 01 09 00.
+
+Some fields in such a message may help you understand the cause of the
+problem, as follows::
+
+    sym0:1: ERROR (0:48) (1-21-65) (f/95/0) @ (script 7c0:19000000).
+    .....A.........B.C....D.E..F....G.H..I.......J.....K...L.......
+
+Field A : target number.
+  SCSI ID of the device the controller was talking with at the moment the
+  error occurs.
+
+Field B : DSTAT io register (DMA STATUS)
+  ========   =============================================================
+  Bit 0x40   MDPE Master Data Parity Error
+             Data parity error detected on the PCI BUS.
+  Bit 0x20   BF   Bus Fault
+             PCI bus fault condition detected
+  Bit 0x01   IID  Illegal Instruction Detected
+             Set by the chip when it detects an Illegal Instruction format
+             on some condition that makes an instruction illegal.
+  Bit 0x80   DFE Dma Fifo Empty
+             Pure status bit that does not indicate an error.
+  ========   =============================================================
+
+  If the reported DSTAT value contains a combination of MDPE (0x40),
+  BF (0x20), then the cause may be likely due to a PCI BUS problem.
+
+Field C : SIST io register (SCSI Interrupt Status)
+  ========   ==================================================================
+  Bit 0x08   SGE  SCSI GROSS ERROR
+             Indicates that the chip detected a severe error condition
+             on the SCSI BUS that prevents the SCSI protocol from functioning
+             properly.
+  Bit 0x04   UDC  Unexpected Disconnection
+             Indicates that the device released the SCSI BUS when the chip
+             was not expecting this to happen. A device may behave so to
+             indicate the SCSI initiator that an error condition not reportable              using the SCSI protocol has occurred.
+  Bit 0x02   RST  SCSI BUS Reset
+             Generally SCSI targets do not reset the SCSI BUS, although any
+             device on the BUS can reset it at any time.
+  Bit 0x01   PAR  Parity
+             SCSI parity error detected.
+  ========   ==================================================================
+
+  On a faulty SCSI BUS, any error condition among SGE (0x08), UDC (0x04) and
+  PAR (0x01) may be detected by the chip. If your SCSI system sometimes
+  encounters such error conditions, especially SCSI GROSS ERROR, then a SCSI
+  BUS problem is likely the cause of these errors.
+
+For fields D,E,F,G and H, you may look into the sym53c8xx_defs.h file
+that contains some minimal comments on IO register bits.
+
+Field D : SOCL  Scsi Output Control Latch
+          This register reflects the state of the SCSI control lines the
+          chip want to drive or compare against.
+Field E : SBCL  Scsi Bus Control Lines
+          Actual value of control lines on the SCSI BUS.
+Field F : SBDL  Scsi Bus Data Lines
+          Actual value of data lines on the SCSI BUS.
+Field G : SXFER  SCSI Transfer
+          Contains the setting of the Synchronous Period for output and
+          the current Synchronous offset (offset 0 means asynchronous).
+Field H : SCNTL3 Scsi Control Register 3
+          Contains the setting of timing values for both asynchronous and
+          synchronous data transfers.
+Field I : SCNTL4 Scsi Control Register 4
+          Only meaningful for 53C1010 Ultra3 controllers.
+
+Understanding Fields J, K, L and dumps requires to have good knowledge of
+SCSI standards, chip cores functionnals and internal driver data structures.
+You are not required to decode and understand them, unless you want to help
+maintain the driver code.
+
+17. Serial NVRAM (added by Richard Waltham: dormouse@farsrobt.demon.co.uk)
+==========================================================================
+
+17.1 Features
+-------------
+
+Enabling serial NVRAM support enables detection of the serial NVRAM included
+on Symbios and some Symbios compatible host adaptors, and Tekram boards. The
+serial NVRAM is used by Symbios and Tekram to hold set up parameters for the
+host adaptor and its attached drives.
+
+The Symbios NVRAM also holds data on the boot order of host adaptors in a
+system with more than one host adaptor.  This information is no longer used
+as it's fundamentally incompatible with the hotplug PCI model.
+
+Tekram boards using Symbios chips, DC390W/F/U, which have NVRAM are detected
+and this is used to distinguish between Symbios compatible and Tekram host
+adaptors. This is used to disable the Symbios compatible "diff" setting
+incorrectly set on Tekram boards if the CONFIG_SCSI_53C8XX_SYMBIOS_COMPAT
+configuration parameter is set enabling both Symbios and Tekram boards to be
+used together with the Symbios cards using all their features, including
+"diff" support. ("led pin" support for Symbios compatible cards can remain
+enabled when using Tekram cards. It does nothing useful for Tekram host
+adaptors but does not cause problems either.)
+
+The parameters the driver is able to get from the NVRAM depend on the
+data format used, as follow:
+
++-------------------------------+------------------+--------------+
+|                               |Tekram format     |Symbios format|
++-------------------------------+------------------+--------------+
+|General and host parameters    |                  |              |
++-------------------------------+------------------+--------------+
+|  * Boot order                 |        N         |       Y      |
++-------------------------------+------------------+--------------+
+|  * Host SCSI ID               |        Y         |       Y      |
++-------------------------------+------------------+--------------+
+|  * SCSI parity checking       |        Y         |       Y      |
++-------------------------------+------------------+--------------+
+|  * Verbose boot messages      |        N         |       Y      |
++-------------------------------+------------------+--------------+
+|SCSI devices parameters                                          |
++-------------------------------+------------------+--------------+
+|  * Synchronous transfer speed |        Y         |       Y      |
++-------------------------------+------------------+--------------+
+|  * Wide 16 / Narrow           |        Y         |       Y      |
++-------------------------------+------------------+--------------+
+|  * Tagged Command Queuing     |        Y         |       Y      |
+|    enabled                    |                  |              |
++-------------------------------+------------------+--------------+
+|  * Disconnections enabled     |        Y         |       Y      |
++-------------------------------+------------------+--------------+
+|  * Scan at boot time          |        N         |       Y      |
++-------------------------------+------------------+--------------+
+
+
+In order to speed up the system boot, for each device configured without
+the "scan at boot time" option, the driver forces an error on the
+first TEST UNIT READY command received for this device.
+
+
+17.2 Symbios NVRAM layout
+-------------------------
+
+typical data at NVRAM address 0x100 (53c810a NVRAM)::
+
+    00 00
+    64 01
+    8e 0b
+
+    00 30 00 00 00 00 07 00 00 00 00 00 00 00 07 04 10 04 00 00
+
+    04 00 0f 00 00 10 00 50 00 00 01 00 00 62
+    04 00 03 00 00 10 00 58 00 00 01 00 00 63
+    04 00 01 00 00 10 00 48 00 00 01 00 00 61
+    00 00 00 00 00 00 00 00 00 00 00 00 00 00
+
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+
+    00 00 00 00 00 00 00 00
+    00 00 00 00 00 00 00 00
+    00 00 00 00 00 00 00 00
+    00 00 00 00 00 00 00 00
+    00 00 00 00 00 00 00 00
+    00 00 00 00 00 00 00 00
+    00 00 00 00 00 00 00 00
+    00 00 00 00 00 00 00 00
+
+    00 00 00 00 00 00 00 00
+    00 00 00 00 00 00 00 00
+    00 00 00 00 00 00 00 00
+    00 00 00 00 00 00 00 00
+    00 00 00 00 00 00 00 00
+    00 00 00 00 00 00 00 00
+    00 00 00 00 00 00 00 00
+    00 00 00 00 00 00 00 00
+
+    00 00 00 00 00 00 00 00
+    00 00 00 00 00 00 00 00
+    00 00 00 00 00 00 00 00
+
+    fe fe
+    00 00
+    00 00
+
+NVRAM layout details
+
+============= =================
+NVRAM Address
+============= =================
+0x000-0x0ff   not used
+0x100-0x26f   initialised data
+0x270-0x7ff   not used
+============= =================
+
+general layout::
+
+        header  -   6 bytes,
+        data    - 356 bytes (checksum is byte sum of this data)
+        trailer -   6 bytes
+                  ---
+        total     368 bytes
+
+data area layout::
+
+        controller set up  -  20 bytes
+        boot configuration -  56 bytes (4x14 bytes)
+        device set up      - 128 bytes (16x8 bytes)
+        unused (spare?)    - 152 bytes (19x8 bytes)
+                             ---
+        total                356 bytes
+
+header::
+
+    00 00   - ?? start marker
+    64 01   - byte count (lsb/msb excludes header/trailer)
+    8e 0b   - checksum (lsb/msb excludes header/trailer)
+
+controller set up::
+
+    00 30 00 00 00 00 07 00 00 00 00 00 00 00 07 04 10 04 00 00
+		    |     |           |     |
+		    |     |           |      -- host ID
+		    |     |           |
+		    |     |            --Removable Media Support
+		    |     |               0x00 = none
+		    |     |               0x01 = Bootable Device
+		    |     |               0x02 = All with Media
+		    |     |
+		    |      --flag bits 2
+		    |        0x00000001= scan order hi->low
+		    |            (default 0x00 - scan low->hi)
+			--flag bits 1
+			0x00000001 scam enable
+			0x00000010 parity enable
+			0x00000100 verbose boot msgs
+
+remaining bytes unknown - they do not appear to change in my
+current set up for any of the controllers.
+
+default set up is identical for 53c810a and 53c875 NVRAM
+(Removable Media added Symbios BIOS version 4.09)
+
+boot configuration
+
+boot order set by order of the devices in this table::
+
+    04 00 0f 00 00 10 00 50 00 00 01 00 00 62 -- 1st controller
+    04 00 03 00 00 10 00 58 00 00 01 00 00 63    2nd controller
+    04 00 01 00 00 10 00 48 00 00 01 00 00 61    3rd controller
+    00 00 00 00 00 00 00 00 00 00 00 00 00 00    4th controller
+	|  |  |  |     |        |     |  |
+	|  |  |  |     |        |      ---- PCI io port adr
+	|  |  |  |     |         --0x01 init/scan at boot time
+	|  |  |  |      --PCI device/function number (0xdddddfff)
+	|  |   ----- ?? PCI vendor ID (lsb/msb)
+	    ----PCI device ID (lsb/msb)
+
+?? use of this data is a guess but seems reasonable
+
+remaining bytes unknown - they do not appear to change in my
+current set up
+
+default set up is identical for 53c810a and 53c875 NVRAM
+
+device set up (up to 16 devices - includes controller)::
+
+    0f 00 08 08 64 00 0a 00 - id 0
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00
+    0f 00 08 08 64 00 0a 00 - id 15
+    |     |  |  |     |  |
+    |     |  |  |      ----timeout (lsb/msb)
+    |     |  |   --synch period (0x?? 40 Mtrans/sec- fast 40) (probably 0x28)
+    |     |  |                  (0x30 20 Mtrans/sec- fast 20)
+    |     |  |                  (0x64 10 Mtrans/sec- fast )
+    |     |  |                  (0xc8  5 Mtrans/sec)
+    |     |  |                  (0x00  asynchronous)
+    |     |   -- ?? max sync offset (0x08 in NVRAM on 53c810a)
+    |     |                         (0x10 in NVRAM on 53c875)
+    |      --device bus width (0x08 narrow)
+    |                         (0x10 16 bit wide)
+    --flag bits
+	0x00000001 - disconnect enabled
+	0x00000010 - scan at boot time
+	0x00000100 - scan luns
+	0x00001000 - queue tags enabled
+
+remaining bytes unknown - they do not appear to change in my
+current set up
+
+?? use of this data is a guess but seems reasonable
+(but it could be max bus width)
+
+default set up for 53c810a NVRAM
+default set up for 53c875 NVRAM
+
+				- bus width     - 0x10
+                                - sync offset ? - 0x10
+                                - sync period   - 0x30
+
+?? spare device space (32 bit bus ??)::
+
+    00 00 00 00 00 00 00 00  (19x8bytes)
+    .
+    .
+    00 00 00 00 00 00 00 00
+
+default set up is identical for 53c810a and 53c875 NVRAM
+
+trailer::
+
+    fe fe   - ? end marker ?
+    00 00
+    00 00
+
+default set up is identical for 53c810a and 53c875 NVRAM
+
+17.3 Tekram NVRAM layout
+------------------------
+
+nvram 64x16 (1024 bit)
+
+Drive settings::
+
+    Drive ID 0-15 (addr 0x0yyyy0 = device setup, yyyy = ID)
+		(addr 0x0yyyy1 = 0x0000)
+
+	x x x x  x x x x  x x x x  x x x x
+		| | |      | |  | | | |
+		| | |      | |  | | |  ----- parity check   0 - off
+		| | |      | |  | | |                       1 - on
+		| | |      | |  | | |
+		| | |      | |  | |  ------- sync neg       0 - off
+		| | |      | |  | |                         1 - on
+		| | |      | |  | |
+		| | |      | |  |  --------- disconnect     0 - off
+		| | |      | |  |                           1 - on
+		| | |      | |  |
+		| | |      | |   ----------- start cmd      0 - off
+		| | |      | |                              1 - on
+		| | |      | |
+		| | |      |  -------------- tagged cmds    0 - off
+		| | |      |                                1 - on
+		| | |      |
+		| | |       ---------------- wide neg       0 - off
+		| | |                                       1 - on
+		| | |
+		    --------------------------- sync rate      0 - 10.0 Mtrans/sec
+							    1 -  8.0
+							    2 -  6.6
+							    3 -  5.7
+							    4 -  5.0
+							    5 -  4.0
+							    6 -  3.0
+							    7 -  2.0
+							    7 -  2.0
+							    8 - 20.0
+							    9 - 16.7
+							    a - 13.9
+							    b - 11.9
+
+Global settings
+
+Host flags 0 (addr 0x100000, 32)::
+
+    x x x x  x x x x  x x x x  x x x x
+    | | | |  | | | |           | | | |
+    | | | |  | | | |            ----------- host ID    0x00 - 0x0f
+    | | | |  | | | |
+    | | | |  | | |  ----------------------- support for    0 - off
+    | | | |  | | |                          > 2 drives     1 - on
+    | | | |  | | |
+    | | | |  | |  ------------------------- support drives 0 - off
+    | | | |  | |                            > 1Gbytes      1 - on
+    | | | |  | |
+    | | | |  |  --------------------------- bus reset on   0 - off
+    | | | |  |                                power on     1 - on
+    | | | |  |
+    | | | |   ----------------------------- active neg     0 - off
+    | | | |                                                1 - on
+    | | | |
+    | | |  -------------------------------- imm seek       0 - off
+    | | |                                                  1 - on
+    | | |
+    | |  ---------------------------------- scan luns      0 - off
+    | |                                                    1 - on
+    | |
+     -------------------------------------- removable      0 - disable
+                                            as BIOS dev    1 - boot device
+                                                           2 - all
+
+Host flags 1 (addr 0x100001, 33)::
+
+    x x x x  x x x x  x x x x  x x x x
+               | | |             | | |
+               | | |              --------- boot delay     0 -   3 sec
+               | | |                                       1 -   5
+               | | |                                       2 -  10
+               | | |                                       3 -  20
+               | | |                                       4 -  30
+               | | |                                       5 -  60
+               | | |                                       6 - 120
+               | | |
+                --------------------------- max tag cmds   0 -  2
+                                                           1 -  4
+                                                           2 -  8
+                                                           3 - 16
+                                                           4 - 32
+
+Host flags 2 (addr 0x100010, 34)::
+
+    x x x x  x x x x  x x x x  x x x x
+                                     |
+                                      ----- F2/F6 enable   0 - off ???
+                                                           1 - on  ???
+
+checksum (addr 0x111111)
+
+checksum = 0x1234 - (sum addr 0-63)
+
+----------------------------------------------------------------------------
+
+default nvram data::
+
+    0x0037 0x0000 0x0037 0x0000 0x0037 0x0000 0x0037 0x0000
+    0x0037 0x0000 0x0037 0x0000 0x0037 0x0000 0x0037 0x0000
+    0x0037 0x0000 0x0037 0x0000 0x0037 0x0000 0x0037 0x0000
+    0x0037 0x0000 0x0037 0x0000 0x0037 0x0000 0x0037 0x0000
+
+    0x0f07 0x0400 0x0001 0x0000 0x0000 0x0000 0x0000 0x0000
+    0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
+    0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
+    0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0xfbbc
diff --git a/Documentation/scsi/sym53c8xx_2.txt b/Documentation/scsi/sym53c8xx_2.txt
deleted file mode 100644
index d281865..0000000
--- a/Documentation/scsi/sym53c8xx_2.txt
+++ /dev/null
@@ -1,1048 +0,0 @@
-The Linux SYM-2 driver documentation file
-
-Written by Gerard Roudier <groudier@free.fr>
-21 Rue Carnot
-95170 DEUIL LA BARRE - FRANCE
-
-Updated by Matthew Wilcox <matthew@wil.cx>
-
-2004-10-09
-===============================================================================
-
-1.  Introduction
-2.  Supported chips and SCSI features
-3.  Advantages of this driver for newer chips.
-      3.1 Optimized SCSI SCRIPTS
-      3.2 New features appeared with the SYM53C896
-4.  Memory mapped I/O versus normal I/O
-5.  Tagged command queueing
-6.  Parity checking
-7.  Profiling information
-8.  Control commands
-      8.1  Set minimum synchronous period
-      8.2  Set wide size
-      8.3  Set maximum number of concurrent tagged commands
-      8.4  Set debug mode
-      8.5  Set flag (no_disc)
-      8.6  Set verbose level
-      8.7  Reset all logical units of a target
-      8.8  Abort all tasks of all logical units of a target
-9.  Configuration parameters
-10. Boot setup commands
-      10.1 Syntax
-      10.2 Available arguments
-             10.2.1  Default number of tagged commands
-             10.2.2  Burst max
-             10.2.3  LED support
-             10.2.4  Differential mode
-             10.2.5  IRQ mode
-             10.2.6  Check SCSI BUS 
-             10.2.7  Suggest a default SCSI id for hosts
-             10.2.8  Verbosity level
-             10.2.9  Debug mode
-             10.2.10 Settle delay
-             10.2.11 Serial NVRAM
-             10.2.12 Exclude a host from being attached
-      10.3 Converting from old options
-      10.4 SCSI BUS checking boot option
-11. SCSI problem troubleshooting
-      15.1 Problem tracking
-      15.2 Understanding hardware error reports
-12. Serial NVRAM support (by Richard Waltham)
-      17.1 Features
-      17.2 Symbios NVRAM layout
-      17.3 Tekram  NVRAM layout
-
-===============================================================================
-
-1. Introduction
-
-This driver supports the whole SYM53C8XX family of PCI-SCSI controllers.
-It also support the subset of LSI53C10XX PCI-SCSI controllers that are based 
-on the SYM53C8XX SCRIPTS language.
-
-It replaces the sym53c8xx+ncr53c8xx driver bundle and shares its core code 
-with the FreeBSD SYM-2 driver. The `glue' that allows this driver to work 
-under Linux is contained in 2 files named sym_glue.h and sym_glue.c.
-Other drivers files are intended not to depend on the Operating System 
-on which the driver is used.
-
-The history of this driver can be summarized as follows:
-
-1993: ncr driver written for 386bsd and FreeBSD by:
-          Wolfgang Stanglmeier        <wolf@cologne.de>
-          Stefan Esser                <se@mi.Uni-Koeln.de>
-
-1996: port of the ncr driver to Linux-1.2.13 and rename it ncr53c8xx.
-          Gerard Roudier
-
-1998: new sym53c8xx driver for Linux based on LOAD/STORE instruction and that 
-      adds full support for the 896 but drops support for early NCR devices.
-          Gerard Roudier
-
-1999: port of the sym53c8xx driver to FreeBSD and support for the LSI53C1010 
-      33 MHz and 66MHz Ultra-3 controllers. The new driver is named `sym'.
-          Gerard Roudier
-
-2000: Add support for early NCR devices to FreeBSD `sym' driver.
-      Break the driver into several sources and separate the OS glue 
-      code from the core code that can be shared among different O/Ses.
-      Write a glue code for Linux.
-          Gerard Roudier
-
-2004: Remove FreeBSD compatibility code.  Remove support for versions of
-      Linux before 2.6.  Start using Linux facilities.
-
-This README file addresses the Linux version of the driver. Under FreeBSD, 
-the driver documentation is the sym.8 man page.
-
-Information about new chips is available at LSILOGIC web server:
-
-          http://www.lsilogic.com/
-
-SCSI standard documentations are available at T10 site:
-
-          http://www.t10.org/
-
-Useful SCSI tools written by Eric Youngdale are part of most Linux 
-distributions:
-   scsiinfo:    command line tool
-   scsi-config: TCL/Tk tool using scsiinfo
-
-2. Supported chips and SCSI features
-
-The following features are supported for all chips:
-
-	Synchronous negotiation
-	Disconnection
-	Tagged command queuing
-	SCSI parity checking
-	PCI Master parity checking
-
-Other features depends on chip capabilities.
-The driver notably uses optimized SCRIPTS for devices that support 
-LOAD/STORE and handles PHASE MISMATCH from SCRIPTS for devices that 
-support the corresponding feature.
-
-The following table shows some characteristics of the chip family.
-
-       On board                                   LOAD/STORE   HARDWARE
-Chip   SDMS BIOS   Wide   SCSI std.   Max. sync   SCRIPTS      PHASE MISMATCH
-----   ---------   ----   ---------   ----------  ----------   --------------
-810        N         N      FAST10    10 MB/s        N             N
-810A       N         N      FAST10    10 MB/s        Y             N
-815        Y         N      FAST10    10 MB/s        N             N
-825        Y         Y      FAST10    20 MB/s        N             N
-825A       Y         Y      FAST10    20 MB/s        Y             N
-860        N         N      FAST20    20 MB/s        Y             N
-875        Y         Y      FAST20    40 MB/s        Y             N
-875A       Y         Y      FAST20    40 MB/s        Y             Y
-876        Y         Y      FAST20    40 MB/s        Y             N
-895        Y         Y      FAST40    80 MB/s        Y             N
-895A       Y         Y      FAST40    80 MB/s        Y             Y
-896        Y         Y      FAST40    80 MB/s        Y             Y
-897        Y         Y      FAST40    80 MB/s        Y             Y
-1510D      Y         Y      FAST40    80 MB/s        Y             Y
-1010       Y         Y      FAST80   160 MB/s        Y             Y
-1010_66*   Y         Y      FAST80   160 MB/s        Y             Y
-
-* Chip supports 33MHz and 66MHz PCI bus clock.
-
-
-Summary of other supported features:
-
-Module:                allow to load the driver
-Memory mapped I/O:     increases performance
-Control commands:      write operations to the proc SCSI file system
-Debugging information: written to syslog (expert only)
-Scatter / gather
-Shared interrupt
-Boot setup commands
-Serial NVRAM:          Symbios and Tekram formats
-
-
-3. Advantages of this driver for newer chips.
-
-3.1 Optimized SCSI SCRIPTS.
-
-All chips except the 810, 815 and 825, support new SCSI SCRIPTS instructions 
-named LOAD and STORE that allow to move up to 1 DWORD from/to an IO register 
-to/from memory much faster that the MOVE MEMORY instruction that is supported 
-by the 53c7xx and 53c8xx family.
-
-The LOAD/STORE instructions support absolute and DSA relative addressing 
-modes. The SCSI SCRIPTS had been entirely rewritten using LOAD/STORE instead 
-of MOVE MEMORY instructions.
-
-Due to the lack of LOAD/STORE SCRIPTS instructions by earlier chips, this 
-driver also incorporates a different SCRIPTS set based on MEMORY MOVE, in 
-order to provide support for the entire SYM53C8XX chips family.
-
-3.2 New features appeared with the SYM53C896
-
-Newer chips (see above) allows handling of the phase mismatch context from 
-SCRIPTS (avoids the phase mismatch interrupt that stops the SCSI processor 
-until the C code has saved the context of the transfer).
-
-The 896 and 1010 chips support 64 bit PCI transactions and addressing, 
-while the 895A supports 32 bit PCI transactions and 64 bit addressing.
-The SCRIPTS processor of these chips is not true 64 bit, but uses segment 
-registers for bit 32-63. Another interesting feature is that LOAD/STORE 
-instructions that address the on-chip RAM (8k) remain internal to the chip.
-
-4. Memory mapped I/O versus normal I/O
-
-Memory mapped I/O has less latency than normal I/O and is the recommended 
-way for doing IO with PCI devices. Memory mapped I/O seems to work fine on 
-most hardware configurations, but some poorly designed chipsets may break 
-this feature. A configuration option is provided for normal I/O to be 
-used but the driver defaults to MMIO.
-
-5. Tagged command queueing
-
-Queuing more than 1 command at a time to a device allows it to perform 
-optimizations based on actual head positions and its mechanical 
-characteristics. This feature may also reduce average command latency.
-In order to really gain advantage of this feature, devices must have 
-a reasonable cache size (No miracle is to be expected for a low-end 
-hard disk with 128 KB or less).
-Some known old SCSI devices do not properly support tagged command queuing.
-Generally, firmware revisions that fix this kind of problems are available 
-at respective vendor web/ftp sites.
-All I can say is that I never have had problem with tagged queuing using 
-this driver and its predecessors. Hard disks that behaved correctly for 
-me using tagged commands are the following:
-
-- IBM S12 0662
-- Conner 1080S
-- Quantum Atlas I
-- Quantum Atlas II
-- Seagate Cheetah I
-- Quantum Viking II
-- IBM DRVS
-- Quantum Atlas IV
-- Seagate Cheetah II
-
-If your controller has NVRAM, you can configure this feature per target 
-from the user setup tool. The Tekram Setup program allows to tune the 
-maximum number of queued commands up to 32. The Symbios Setup only allows 
-to enable or disable this feature.
-
-The maximum number of simultaneous tagged commands queued to a device
-is currently set to 16 by default.  This value is suitable for most SCSI
-disks.  With large SCSI disks (>= 2GB, cache >= 512KB, average seek time
-<= 10 ms), using a larger value may give better performances.
-
-This driver supports up to 255 commands per device, and but using more than 
-64 is generally not worth-while, unless you are using a very large disk or 
-disk arrays. It is noticeable that most of recent hard disks seem not to 
-accept more than 64 simultaneous commands. So, using more than 64 queued 
-commands is probably just resource wasting.
-
-If your controller does not have NVRAM or if it is managed by the SDMS 
-BIOS/SETUP, you can configure tagged queueing feature and device queue 
-depths from the boot command-line. For example:
-
-  sym53c8xx=tags:4/t2t3q15-t4q7/t1u0q32
-
-will set tagged commands queue depths as follow:
-
-- target 2  all luns  on controller 0 --> 15
-- target 3  all luns  on controller 0 --> 15
-- target 4  all luns  on controller 0 -->  7
-- target 1  lun 0     on controller 1 --> 32
-- all other target/lun                -->  4
-
-In some special conditions, some SCSI disk firmwares may return a
-QUEUE FULL status for a SCSI command. This behaviour is managed by the
-driver using the following heuristic:
-
-- Each time a QUEUE FULL status is returned, tagged queue depth is reduced 
-  to the actual number of disconnected commands. 
-
-- Every 200 successfully completed SCSI commands, if allowed by the
-  current limit, the maximum number of queueable commands is incremented.
-
-Since QUEUE FULL status reception and handling is resource wasting, the 
-driver notifies by default this problem to user by indicating the actual 
-number of commands used and their status, as well as its decision on the 
-device queue depth change.
-The heuristic used by the driver in handling QUEUE FULL ensures that the 
-impact on performances is not too bad. You can get rid of the messages by 
-setting verbose level to zero, as follow:
-
-1st method: boot your system using 'sym53c8xx=verb:0' option.
-2nd method: apply "setverbose 0" control command to the proc fs entry 
-            corresponding to your controller after boot-up.
-
-6. Parity checking
-
-The driver supports SCSI parity checking and PCI bus master parity
-checking.  These features must be enabled in order to ensure safe
-data transfers.  Some flawed devices or mother boards may have problems
-with parity.  The options to defeat parity checking have been removed
-from the driver.
-
-7. Profiling information
-
-This driver does not provide profiling information as did its predecessors.
-This feature was not this useful and added complexity to the code. 
-As the driver code got more complex, I have decided to remove everything 
-that didn't seem actually useful.
-
-8. Control commands
-
-Control commands can be sent to the driver with write operations to
-the proc SCSI file system. The generic command syntax is the
-following:
-
-      echo "<verb> <parameters>" >/proc/scsi/sym53c8xx/0
-      (assumes controller number is 0)
-
-Using "all" for "<target>" parameter with the commands below will
-apply to all targets of the SCSI chain (except the controller).
-
-Available commands:
-
-8.1 Set minimum synchronous period factor
-
-    setsync <target> <period factor>
-
-    target:    target number
-    period:    minimum synchronous period.
-               Maximum speed = 1000/(4*period factor) except for special
-               cases below.
-
-    Specify a period of 0, to force asynchronous transfer mode.
-
-       9 means 12.5 nano-seconds synchronous period
-      10 means 25 nano-seconds synchronous period
-      11 means 30 nano-seconds synchronous period
-      12 means 50 nano-seconds synchronous period
-
-8.2 Set wide size
-
-    setwide <target> <size>
-
-    target:    target number
-    size:      0=8 bits, 1=16bits
-
-8.3 Set maximum number of concurrent tagged commands
- 
-    settags <target> <tags>
-
-    target:    target number
-    tags:      number of concurrent tagged commands
-               must not be greater than configured (default: 16)
-
-8.4 Set debug mode
-
-    setdebug <list of debug flags>
-
-    Available debug flags:
-        alloc:   print info about memory allocations (ccb, lcb)
-        queue:   print info about insertions into the command start queue
-        result:  print sense data on CHECK CONDITION status
-        scatter: print info about the scatter process
-        scripts: print info about the script binding process
-	tiny:    print minimal debugging information
-	timing:  print timing information of the NCR chip
-	nego:    print information about SCSI negotiations
-	phase:   print information on script interruptions
-
-    Use "setdebug" with no argument to reset debug flags.
-
-
-8.5 Set flag (no_disc)
- 
-    setflag <target> <flag>
-
-    target:    target number
-
-    For the moment, only one flag is available:
-
-        no_disc:   not allow target to disconnect.
-
-    Do not specify any flag in order to reset the flag. For example:
-    - setflag 4
-      will reset no_disc flag for target 4, so will allow it disconnections.
-    - setflag all
-      will allow disconnection for all devices on the SCSI bus.
-
-
-8.6 Set verbose level
-
-    setverbose #level
-
-    The driver default verbose level is 1. This command allows to change 
-    th driver verbose level after boot-up.
-
-8.7 Reset all logical units of a target
-
-    resetdev <target>
-
-    target:    target number
-    The driver will try to send a BUS DEVICE RESET message to the target.
-
-8.8 Abort all tasks of all logical units of a target
-
-    cleardev <target>
-
-    target:    target number
-    The driver will try to send a ABORT message to all the logical units 
-    of the target.
-
-
-9. Configuration parameters
-
-Under kernel configuration tools (make menuconfig, for example), it is 
-possible to change some default driver configuration parameters.
-If the firmware of all your devices is perfect enough, all the
-features supported by the driver can be enabled at start-up. However,
-if only one has a flaw for some SCSI feature, you can disable the
-support by the driver of this feature at linux start-up and enable
-this feature after boot-up only for devices that support it safely.
-
-Configuration parameters:
-
-Use normal IO                         (default answer: n)
-    Answer "y" if you suspect your mother board to not allow memory mapped I/O.
-    May slow down performance a little.
-
-Default tagged command queue depth    (default answer: 16)
-    Entering 0 defaults to tagged commands not being used.
-    This parameter can be specified from the boot command line.
-
-Maximum number of queued commands     (default answer: 32)
-    This option allows you to specify the maximum number of tagged commands 
-    that can be queued to a device. The maximum supported value is 255.
-
-Synchronous transfers frequency       (default answer: 80)
-    This option allows you to specify the frequency in MHz the driver 
-    will use at boot time for synchronous data transfer negotiations.
-    0 means "asynchronous data transfers".
-
-10. Boot setup commands
-
-10.1 Syntax
-
-Setup commands can be passed to the driver either at boot time or as
-parameters to modprobe, as described in Documentation/admin-guide/kernel-parameters.rst
-
-Example of boot setup command under lilo prompt:
-
-lilo: linux root=/dev/sda2 sym53c8xx.cmd_per_lun=4 sym53c8xx.sync=10 sym53c8xx.debug=0x200
-
-- enable tagged commands, up to 4 tagged commands queued.
-- set synchronous negotiation speed to 10 Mega-transfers / second.
-- set DEBUG_NEGO flag.
-
-The following command will install the driver module with the same
-options as above.
-
-    modprobe sym53c8xx cmd_per_lun=4 sync=10 debug=0x200
-
-10.2 Available arguments
-
-10.2.1  Default number of tagged commands
-        cmd_per_lun=0 (or cmd_per_lun=1) tagged command queuing disabled
-        cmd_per_lun=#tags (#tags > 1) tagged command queuing enabled
-  #tags will be truncated to the max queued commands configuration parameter.
-
-10.2.2 Burst max
-        burst=0    burst disabled
-        burst=255  get burst length from initial IO register settings.
-        burst=#x   burst enabled (1<<#x burst transfers max)
-  #x is an integer value which is log base 2 of the burst transfers max.
-  By default the driver uses the maximum value supported by the chip.
-
-10.2.3 LED support
-        led=1      enable  LED support
-        led=0      disable LED support
-  Do not enable LED support if your scsi board does not use SDMS BIOS.
-  (See 'Configuration parameters')
-
-10.2.4 Differential mode
-        diff=0	never set up diff mode
-        diff=1	set up diff mode if BIOS set it
-        diff=2	always set up diff mode
-        diff=3	set diff mode if GPIO3 is not set
-
-10.2.5 IRQ mode
-        irqm=0     always open drain
-        irqm=1     same as initial settings (assumed BIOS settings)
-        irqm=2     always totem pole
-
-10.2.6 Check SCSI BUS 
-        buschk=<option bits>
-
-    Available option bits:
-        0x0:   No check.
-        0x1:   Check and do not attach the controller on error.  
-        0x2:   Check and just warn on error.
-
-10.2.7 Suggest a default SCSI id for hosts
-        hostid=255	no id suggested.
-        hostid=#x   (0 < x < 7) x suggested for hosts SCSI id.
-
-    If a host SCSI id is available from the NVRAM, the driver will ignore 
-    any value suggested as boot option. Otherwise, if a suggested value 
-    different from 255 has been supplied, it will use it. Otherwise, it will 
-    try to deduce the value previously set in the hardware and use value 
-    7 if the hardware value is zero.
-
-10.2.8  Verbosity level
-        verb=0     minimal
-        verb=1     normal
-        verb=2     too much
-
-10.2.9 Debug mode
-        debug=0	 clear debug flags
-        debug=#x   set debug flags
-  #x is an integer value combining the following power-of-2 values:
-  DEBUG_ALLOC       0x1
-  DEBUG_PHASE       0x2
-  DEBUG_POLL        0x4
-  DEBUG_QUEUE       0x8
-  DEBUG_RESULT     0x10
-  DEBUG_SCATTER    0x20
-  DEBUG_SCRIPT     0x40
-  DEBUG_TINY       0x80
-  DEBUG_TIMING    0x100
-  DEBUG_NEGO      0x200
-  DEBUG_TAGS      0x400
-  DEBUG_FREEZE    0x800
-  DEBUG_RESTART  0x1000
-
-  You can play safely with DEBUG_NEGO. However, some of these flags may 
-  generate bunches of syslog messages. 
-
-10.2.10 Settle delay
-        settle=n	delay for n seconds
-
-  After a bus reset, the driver will delay for n seconds before talking
-  to any device on the bus.  The default is 3 seconds and safe mode will
-  default it to 10.
-
-10.2.11 Serial NVRAM
-	NB: option not currently implemented.
-        nvram=n     do not look for serial NVRAM
-        nvram=y     test controllers for onboard serial NVRAM
-        (alternate binary form)
-        nvram=<bits options>
-        0x01   look for NVRAM  (equivalent to nvram=y)
-        0x02   ignore NVRAM "Synchronous negotiation" parameters for all devices
-        0x04   ignore NVRAM "Wide negotiation"  parameter for all devices
-        0x08   ignore NVRAM "Scan at boot time" parameter for all devices
-        0x80   also attach controllers set to OFF in the NVRAM (sym53c8xx only)
-
-10.2.12 Exclude a host from being attached
-        excl=<io_address>,...
-
-    Prevent host at a given io address from being attached.
-    For example 'excl=0xb400,0xc000' indicate to the 
-    driver not to attach hosts at address 0xb400 and 0xc000.
-
-10.3 Converting from old style options
-
-Previously, the sym2 driver accepted arguments of the form
-	sym53c8xx=tags:4,sync:10,debug:0x200
-
-As a result of the new module parameters, this is no longer available.
-Most of the options have remained the same, but tags has become
-cmd_per_lun to reflect its different purposes.  The sample above would
-be specified as:
-	modprobe sym53c8xx cmd_per_lun=4 sync=10 debug=0x200
-
-or on the kernel boot line as:
-	sym53c8xx.cmd_per_lun=4 sym53c8xx.sync=10 sym53c8xx.debug=0x200
-
-10.4 SCSI BUS checking boot option.
-
-When this option is set to a non-zero value, the driver checks SCSI lines 
-logic state, 100 micro-seconds after having asserted the SCSI RESET line.
-The driver just reads SCSI lines and checks all lines read FALSE except RESET.
-Since SCSI devices shall release the BUS at most 800 nano-seconds after SCSI 
-RESET has been asserted, any signal to TRUE may indicate a SCSI BUS problem.
-Unfortunately, the following common SCSI BUS problems are not detected:
-- Only 1 terminator installed.
-- Misplaced terminators.
-- Bad quality terminators.
-On the other hand, either bad cabling, broken devices, not conformant 
-devices, ... may cause a SCSI signal to be wrong when te driver reads it.
-
-15. SCSI problem troubleshooting
-
-15.1 Problem tracking
-
-Most SCSI problems are due to a non conformant SCSI bus or too buggy
-devices.  If unfortunately you have SCSI problems, you can check the
-following things:
-
-- SCSI bus cables
-- terminations at both end of the SCSI chain
-- linux syslog messages (some of them may help you)
-
-If you do not find the source of problems, you can configure the
-driver or devices in the NVRAM with minimal features.
-
-- only asynchronous data transfers
-- tagged commands disabled
-- disconnections not allowed
-
-Now, if your SCSI bus is ok, your system has every chance to work
-with this safe configuration but performances will not be optimal.
-
-If it still fails, then you can send your problem description to
-appropriate mailing lists or news-groups.  Send me a copy in order to
-be sure I will receive it.  Obviously, a bug in the driver code is
-possible.
-
-  My current email address: Gerard Roudier <groudier@free.fr>
-
-Allowing disconnections is important if you use several devices on
-your SCSI bus but often causes problems with buggy devices.
-Synchronous data transfers increases throughput of fast devices like
-hard disks.  Good SCSI hard disks with a large cache gain advantage of
-tagged commands queuing.
-
-15.2 Understanding hardware error reports
-
-When the driver detects an unexpected error condition, it may display a 
-message of the following pattern.
-
-sym0:1: ERROR (0:48) (1-21-65) (f/95/0) @ (script 7c0:19000000).
-sym0: script cmd = 19000000
-sym0: regdump: da 10 80 95 47 0f 01 07 75 01 81 21 80 01 09 00.
-
-Some fields in such a message may help you understand the cause of the 
-problem, as follows:
-
-sym0:1: ERROR (0:48) (1-21-65) (f/95/0) @ (script 7c0:19000000).
-.....A.........B.C....D.E..F....G.H..I.......J.....K...L.......
-
-Field A : target number.
-  SCSI ID of the device the controller was talking with at the moment the 
-  error occurs.
-
-Field B : DSTAT io register (DMA STATUS)
-  Bit 0x40 : MDPE Master Data Parity Error
-             Data parity error detected on the PCI BUS.
-  Bit 0x20 : BF   Bus Fault
-             PCI bus fault condition detected
-  Bit 0x01 : IID  Illegal Instruction Detected
-             Set by the chip when it detects an Illegal Instruction format 
-             on some condition that makes an instruction illegal.
-  Bit 0x80 : DFE Dma Fifo Empty
-             Pure status bit that does not indicate an error.
-  If the reported DSTAT value contains a combination of MDPE (0x40), 
-  BF (0x20), then the cause may be likely due to a PCI BUS problem.
-
-Field C : SIST io register (SCSI Interrupt Status)
-  Bit 0x08 : SGE  SCSI GROSS ERROR
-             Indicates that the chip detected a severe error condition 
-             on the SCSI BUS that prevents the SCSI protocol from functioning
-             properly.
-  Bit 0x04 : UDC  Unexpected Disconnection
-             Indicates that the device released the SCSI BUS when the chip 
-             was not expecting this to happen. A device may behave so to 
-             indicate the SCSI initiator that an error condition not reportable              using the SCSI protocol has occurred.
-  Bit 0x02 : RST  SCSI BUS Reset
-             Generally SCSI targets do not reset the SCSI BUS, although any 
-             device on the BUS can reset it at any time.
-  Bit 0x01 : PAR  Parity
-             SCSI parity error detected.
-  On a faulty SCSI BUS, any error condition among SGE (0x08), UDC (0x04) and 
-  PAR (0x01) may be detected by the chip. If your SCSI system sometimes 
-  encounters such error conditions, especially SCSI GROSS ERROR, then a SCSI 
-  BUS problem is likely the cause of these errors.
-
-For fields D,E,F,G and H, you may look into the sym53c8xx_defs.h file 
-that contains some minimal comments on IO register bits.
-Field D : SOCL  Scsi Output Control Latch
-          This register reflects the state of the SCSI control lines the 
-          chip want to drive or compare against.
-Field E : SBCL  Scsi Bus Control Lines
-          Actual value of control lines on the SCSI BUS.
-Field F : SBDL  Scsi Bus Data Lines
-          Actual value of data lines on the SCSI BUS.
-Field G : SXFER  SCSI Transfer
-          Contains the setting of the Synchronous Period for output and 
-          the current Synchronous offset (offset 0 means asynchronous).
-Field H : SCNTL3 Scsi Control Register 3
-          Contains the setting of timing values for both asynchronous and 
-          synchronous data transfers. 
-Field I : SCNTL4 Scsi Control Register 4
-          Only meaningful for 53C1010 Ultra3 controllers.
-
-Understanding Fields J, K, L and dumps requires to have good knowledge of 
-SCSI standards, chip cores functionnals and internal driver data structures.
-You are not required to decode and understand them, unless you want to help 
-maintain the driver code.
-
-17. Serial NVRAM (added by Richard Waltham: dormouse@farsrobt.demon.co.uk)
-
-17.1 Features
-
-Enabling serial NVRAM support enables detection of the serial NVRAM included
-on Symbios and some Symbios compatible host adaptors, and Tekram boards. The 
-serial NVRAM is used by Symbios and Tekram to hold set up parameters for the 
-host adaptor and its attached drives.
-
-The Symbios NVRAM also holds data on the boot order of host adaptors in a
-system with more than one host adaptor.  This information is no longer used
-as it's fundamentally incompatible with the hotplug PCI model.
-
-Tekram boards using Symbios chips, DC390W/F/U, which have NVRAM are detected
-and this is used to distinguish between Symbios compatible and Tekram host 
-adaptors. This is used to disable the Symbios compatible "diff" setting
-incorrectly set on Tekram boards if the CONFIG_SCSI_53C8XX_SYMBIOS_COMPAT 
-configuration parameter is set enabling both Symbios and Tekram boards to be 
-used together with the Symbios cards using all their features, including
-"diff" support. ("led pin" support for Symbios compatible cards can remain
-enabled when using Tekram cards. It does nothing useful for Tekram host
-adaptors but does not cause problems either.)
-
-The parameters the driver is able to get from the NVRAM depend on the 
-data format used, as follow:
-
-                                 Tekram format      Symbios format
-General and host parameters
-    Boot order                         N                   Y
-    Host SCSI ID                       Y                   Y
-    SCSI parity checking               Y                   Y
-    Verbose boot messages              N                   Y
-SCSI devices parameters
-    Synchronous transfer speed         Y                   Y
-    Wide 16 / Narrow                   Y                   Y
-    Tagged Command Queuing enabled     Y                   Y
-    Disconnections enabled             Y                   Y
-    Scan at boot time                  N                   Y
-
-In order to speed up the system boot, for each device configured without 
-the "scan at boot time" option, the driver forces an error on the 
-first TEST UNIT READY command received for this device.
-
-
-17.2 Symbios NVRAM layout
-
-typical data at NVRAM address 0x100 (53c810a NVRAM)
------------------------------------------------------------
-00 00
-64 01
-8e 0b
-
-00 30 00 00 00 00 07 00 00 00 00 00 00 00 07 04 10 04 00 00 
-
-04 00 0f 00 00 10 00 50 00 00 01 00 00 62 
-04 00 03 00 00 10 00 58 00 00 01 00 00 63 
-04 00 01 00 00 10 00 48 00 00 01 00 00 61 
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 
-
-0f 00 08 08 64 00 0a 00
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-
-00 00 00 00 00 00 00 00 
-00 00 00 00 00 00 00 00 
-00 00 00 00 00 00 00 00 
-00 00 00 00 00 00 00 00 
-00 00 00 00 00 00 00 00 
-00 00 00 00 00 00 00 00 
-00 00 00 00 00 00 00 00 
-00 00 00 00 00 00 00 00 
-
-00 00 00 00 00 00 00 00 
-00 00 00 00 00 00 00 00 
-00 00 00 00 00 00 00 00 
-00 00 00 00 00 00 00 00 
-00 00 00 00 00 00 00 00 
-00 00 00 00 00 00 00 00 
-00 00 00 00 00 00 00 00 
-00 00 00 00 00 00 00 00 
-
-00 00 00 00 00 00 00 00 
-00 00 00 00 00 00 00 00 
-00 00 00 00 00 00 00 00 
-
-fe fe
-00 00
-00 00
------------------------------------------------------------
-NVRAM layout details
-
-NVRAM Address 0x000-0x0ff not used
-              0x100-0x26f initialised data
-              0x270-0x7ff not used
-
-general layout
-
-        header  -   6 bytes,
-        data    - 356 bytes (checksum is byte sum of this data)
-        trailer -   6 bytes
-                  ---
-        total     368 bytes
-
-data area layout
-
-        controller set up  -  20 bytes
-        boot configuration -  56 bytes (4x14 bytes)
-        device set up      - 128 bytes (16x8 bytes)
-        unused (spare?)    - 152 bytes (19x8 bytes)
-                             ---
-        total                356 bytes
-
------------------------------------------------------------
-header
-
-00 00   - ?? start marker
-64 01   - byte count (lsb/msb excludes header/trailer)
-8e 0b   - checksum (lsb/msb excludes header/trailer)
------------------------------------------------------------
-controller set up
-
-00 30 00 00 00 00 07 00 00 00 00 00 00 00 07 04 10 04 00 00
-                   |     |           |     |
-                   |     |           |      -- host ID
-                   |     |           |
-                   |     |            --Removable Media Support
-                   |     |               0x00 = none
-                   |     |               0x01 = Bootable Device
-                   |     |               0x02 = All with Media
-                   |     |
-                   |      --flag bits 2
-                   |        0x00000001= scan order hi->low
-                   |            (default 0x00 - scan low->hi)
-                    --flag bits 1
-                       0x00000001 scam enable
-                       0x00000010 parity enable
-                       0x00000100 verbose boot msgs
-
-remaining bytes unknown - they do not appear to change in my
-current set up for any of the controllers.
-
-default set up is identical for 53c810a and 53c875 NVRAM
-(Removable Media added Symbios BIOS version 4.09)
------------------------------------------------------------
-boot configuration
-
-boot order set by order of the devices in this table
-
-04 00 0f 00 00 10 00 50 00 00 01 00 00 62 -- 1st controller
-04 00 03 00 00 10 00 58 00 00 01 00 00 63    2nd controller
-04 00 01 00 00 10 00 48 00 00 01 00 00 61    3rd controller
-00 00 00 00 00 00 00 00 00 00 00 00 00 00    4th controller
-       |  |  |  |     |        |     |  |
-       |  |  |  |     |        |      ---- PCI io port adr
-       |  |  |  |     |         --0x01 init/scan at boot time
-       |  |  |  |      --PCI device/function number (0xdddddfff)
-       |  |   ----- ?? PCI vendor ID (lsb/msb)
-        ----PCI device ID (lsb/msb)
-
-?? use of this data is a guess but seems reasonable
-
-remaining bytes unknown - they do not appear to change in my
-current set up
-
-default set up is identical for 53c810a and 53c875 NVRAM
------------------------------------------------------------
-device set up (up to 16 devices - includes controller)
-
-0f 00 08 08 64 00 0a 00 - id 0
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 
-0f 00 08 08 64 00 0a 00 - id 15
- |     |  |  |     |  |
- |     |  |  |      ----timeout (lsb/msb)
- |     |  |   --synch period (0x?? 40 Mtrans/sec- fast 40) (probably 0x28)
- |     |  |                  (0x30 20 Mtrans/sec- fast 20)
- |     |  |                  (0x64 10 Mtrans/sec- fast )
- |     |  |                  (0xc8  5 Mtrans/sec)
- |     |  |                  (0x00  asynchronous)
- |     |   -- ?? max sync offset (0x08 in NVRAM on 53c810a) 
- |     |                         (0x10 in NVRAM on 53c875)
- |      --device bus width (0x08 narrow)
- |                         (0x10 16 bit wide)
-  --flag bits
-    0x00000001 - disconnect enabled
-    0x00000010 - scan at boot time
-    0x00000100 - scan luns
-    0x00001000 - queue tags enabled
-
-remaining bytes unknown - they do not appear to change in my
-current set up
-
-?? use of this data is a guess but seems reasonable 
-(but it could be max bus width)
-
-default set up for 53c810a NVRAM
-default set up for 53c875 NVRAM - bus width     - 0x10
-                                - sync offset ? - 0x10
-                                - sync period   - 0x30
------------------------------------------------------------
-?? spare device space (32 bit bus ??)
-
-00 00 00 00 00 00 00 00  (19x8bytes)
-.
-.
-00 00 00 00 00 00 00 00
-
-default set up is identical for 53c810a and 53c875 NVRAM
------------------------------------------------------------
-trailer
-
-fe fe   - ? end marker ?
-00 00
-00 00
-
-default set up is identical for 53c810a and 53c875 NVRAM
------------------------------------------------------------
-
-
-
-17.3 Tekram NVRAM layout
-
-nvram 64x16 (1024 bit)
-
-Drive settings
-
-Drive ID 0-15 (addr 0x0yyyy0 = device setup, yyyy = ID)
-              (addr 0x0yyyy1 = 0x0000)
-
-    x x x x  x x x x  x x x x  x x x x
-               | | |      | |  | | | |
-               | | |      | |  | | |  ----- parity check   0 - off
-               | | |      | |  | | |                       1 - on
-               | | |      | |  | | |
-               | | |      | |  | |  ------- sync neg       0 - off
-               | | |      | |  | |                         1 - on
-               | | |      | |  | |
-               | | |      | |  |  --------- disconnect     0 - off
-               | | |      | |  |                           1 - on
-               | | |      | |  |
-               | | |      | |   ----------- start cmd      0 - off
-               | | |      | |                              1 - on
-               | | |      | |
-               | | |      |  -------------- tagged cmds    0 - off
-               | | |      |                                1 - on
-               | | |      | 
-               | | |       ---------------- wide neg       0 - off
-               | | |                                       1 - on
-               | | |
-                --------------------------- sync rate      0 - 10.0 Mtrans/sec
-                                                           1 -  8.0
-                                                           2 -  6.6
-                                                           3 -  5.7
-                                                           4 -  5.0
-                                                           5 -  4.0
-                                                           6 -  3.0
-                                                           7 -  2.0
-                                                           7 -  2.0
-                                                           8 - 20.0
-                                                           9 - 16.7
-                                                           a - 13.9
-                                                           b - 11.9
-
-Global settings
-
-Host flags 0 (addr 0x100000, 32) 
-
-    x x x x  x x x x  x x x x  x x x x
-    | | | |  | | | |           | | | |
-    | | | |  | | | |            ----------- host ID    0x00 - 0x0f
-    | | | |  | | | |
-    | | | |  | | |  ----------------------- support for    0 - off
-    | | | |  | | |                          > 2 drives     1 - on
-    | | | |  | | | 
-    | | | |  | |  ------------------------- support drives 0 - off
-    | | | |  | |                            > 1Gbytes      1 - on
-    | | | |  | |
-    | | | |  |  --------------------------- bus reset on   0 - off
-    | | | |  |                                power on     1 - on
-    | | | |  |
-    | | | |   ----------------------------- active neg     0 - off
-    | | | |                                                1 - on
-    | | | |
-    | | |  -------------------------------- imm seek       0 - off
-    | | |                                                  1 - on
-    | | |
-    | |  ---------------------------------- scan luns      0 - off
-    | |                                                    1 - on
-    | |
-     -------------------------------------- removable      0 - disable
-                                            as BIOS dev    1 - boot device
-                                                           2 - all
-
-Host flags 1 (addr 0x100001, 33)
-
-    x x x x  x x x x  x x x x  x x x x
-               | | |             | | | 
-               | | |              --------- boot delay     0 -   3 sec
-               | | |                                       1 -   5
-               | | |                                       2 -  10
-               | | |                                       3 -  20
-               | | |                                       4 -  30
-               | | |                                       5 -  60
-               | | |                                       6 - 120
-               | | |
-                --------------------------- max tag cmds   0 -  2
-                                                           1 -  4
-                                                           2 -  8
-                                                           3 - 16
-                                                           4 - 32
-
-Host flags 2 (addr 0x100010, 34)
-
-    x x x x  x x x x  x x x x  x x x x
-                                     |
-                                      ----- F2/F6 enable   0 - off ???
-                                                           1 - on  ???
-
-checksum (addr 0x111111)
-
-checksum = 0x1234 - (sum addr 0-63)
-
-----------------------------------------------------------------------------
-
-default nvram data:
-
-0x0037 0x0000 0x0037 0x0000 0x0037 0x0000 0x0037 0x0000
-0x0037 0x0000 0x0037 0x0000 0x0037 0x0000 0x0037 0x0000
-0x0037 0x0000 0x0037 0x0000 0x0037 0x0000 0x0037 0x0000
-0x0037 0x0000 0x0037 0x0000 0x0037 0x0000 0x0037 0x0000 
-
-0x0f07 0x0400 0x0001 0x0000 0x0000 0x0000 0x0000 0x0000
-0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
-0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
-0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0xfbbc
-
-
-===============================================================================
-End of Linux SYM-2 driver documentation file
diff --git a/Documentation/scsi/tcm_qla2xxx.rst b/Documentation/scsi/tcm_qla2xxx.rst
new file mode 100644
index 0000000..91bc1fc
--- /dev/null
+++ b/Documentation/scsi/tcm_qla2xxx.rst
@@ -0,0 +1,36 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+========================
+tcm_qla2xxx Driver Notes
+========================
+
+tcm_qla2xxx jam_host attribute
+------------------------------
+There is now a new module endpoint atribute called jam_host
+attribute::
+
+	jam_host: boolean=0/1
+
+This attribute and accompanying code is only included if the
+Kconfig parameter TCM_QLA2XXX_DEBUG is set to Y
+
+By default this jammer code and functionality is disabled
+
+Use this attribute to control the discarding of SCSI commands to a
+selected host.
+
+This may be useful for testing error handling and simulating slow drain
+and other fabric issues.
+
+Setting a boolean of 1 for the jam_host attribute for a particular host
+will discard the commands for that host.
+
+Reset back to 0 to stop the jamming.
+
+Enable host 4 to be jammed::
+
+  echo 1 > /sys/kernel/config/target/qla2xxx/21:00:00:24:ff:27:8f:ae/tpgt_1/attrib/jam_host
+
+Disable jamming on host 4::
+
+  echo 0 > /sys/kernel/config/target/qla2xxx/21:00:00:24:ff:27:8f:ae/tpgt_1/attrib/jam_host
diff --git a/Documentation/scsi/tcm_qla2xxx.txt b/Documentation/scsi/tcm_qla2xxx.txt
deleted file mode 100644
index c3a670a..0000000
--- a/Documentation/scsi/tcm_qla2xxx.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-tcm_qla2xxx jam_host attribute
-------------------------------
-There is now a new module endpoint atribute called jam_host
-attribute: jam_host: boolean=0/1
-This attribute and accompanying code is only included if the
-Kconfig parameter TCM_QLA2XXX_DEBUG is set to Y
-By default this jammer code and functionality is disabled
-
-Use this attribute to control the discarding of SCSI commands to a
-selected host.
-This may be useful for testing error handling and simulating slow drain
-and other fabric issues.
-
-Setting a boolean of 1 for the jam_host attribute for a particular host
- will discard the commands for that host.
-Reset back to 0 to stop the jamming.
-
-Enable host 4 to be jammed
-echo 1 > /sys/kernel/config/target/qla2xxx/21:00:00:24:ff:27:8f:ae/tpgt_1/attrib/jam_host
-
-Disable jamming on host 4
-echo 0 > /sys/kernel/config/target/qla2xxx/21:00:00:24:ff:27:8f:ae/tpgt_1/attrib/jam_host
diff --git a/Documentation/scsi/ufs.rst b/Documentation/scsi/ufs.rst
new file mode 100644
index 0000000..a920c0a
--- /dev/null
+++ b/Documentation/scsi/ufs.rst
@@ -0,0 +1,195 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=======================
+Universal Flash Storage
+=======================
+
+
+.. Contents
+
+   1. Overview
+   2. UFS Architecture Overview
+     2.1 Application Layer
+     2.2 UFS Transport Protocol(UTP) layer
+     2.3 UFS Interconnect(UIC) Layer
+   3. UFSHCD Overview
+     3.1 UFS controller initialization
+     3.2 UTP Transfer requests
+     3.3 UFS error handling
+     3.4 SCSI Error handling
+
+
+1. Overview
+===========
+
+Universal Flash Storage(UFS) is a storage specification for flash devices.
+It is aimed to provide a universal storage interface for both
+embedded and removable flash memory based storage in mobile
+devices such as smart phones and tablet computers. The specification
+is defined by JEDEC Solid State Technology Association. UFS is based
+on MIPI M-PHY physical layer standard. UFS uses MIPI M-PHY as the
+physical layer and MIPI Unipro as the link layer.
+
+The main goals of UFS is to provide:
+
+ * Optimized performance:
+
+   For UFS version 1.0 and 1.1 the target performance is as follows:
+
+   - Support for Gear1 is mandatory (rate A: 1248Mbps, rate B: 1457.6Mbps)
+   - Support for Gear2 is optional (rate A: 2496Mbps, rate B: 2915.2Mbps)
+
+   Future version of the standard,
+
+   - Gear3 (rate A: 4992Mbps, rate B: 5830.4Mbps)
+
+ * Low power consumption
+ * High random IOPs and low latency
+
+
+2. UFS Architecture Overview
+============================
+
+UFS has a layered communication architecture which is based on SCSI
+SAM-5 architectural model.
+
+UFS communication architecture consists of following layers,
+
+2.1 Application Layer
+---------------------
+
+  The Application layer is composed of UFS command set layer(UCS),
+  Task Manager and Device manager. The UFS interface is designed to be
+  protocol agnostic, however SCSI has been selected as a baseline
+  protocol for versions 1.0 and 1.1 of UFS protocol  layer.
+
+  UFS supports subset of SCSI commands defined by SPC-4 and SBC-3.
+
+  * UCS:
+     It handles SCSI commands supported by UFS specification.
+  * Task manager:
+     It handles task management functions defined by the
+     UFS which are meant for command queue control.
+  * Device manager:
+     It handles device level operations and device
+     configuration operations. Device level operations mainly involve
+     device power management operations and commands to Interconnect
+     layers. Device level configurations involve handling of query
+     requests which are used to modify and retrieve configuration
+     information of the device.
+
+2.2 UFS Transport Protocol(UTP) layer
+-------------------------------------
+
+  UTP layer provides services for
+  the higher layers through Service Access Points. UTP defines 3
+  service access points for higher layers.
+
+  * UDM_SAP: Device manager service access point is exposed to device
+    manager for device level operations. These device level operations
+    are done through query requests.
+  * UTP_CMD_SAP: Command service access point is exposed to UFS command
+    set layer(UCS) to transport commands.
+  * UTP_TM_SAP: Task management service access point is exposed to task
+    manager to transport task management functions.
+
+  UTP transports messages through UFS protocol information unit(UPIU).
+
+2.3 UFS Interconnect(UIC) Layer
+-------------------------------
+
+  UIC is the lowest layer of UFS layered architecture. It handles
+  connection between UFS host and UFS device. UIC consists of
+  MIPI UniPro and MIPI M-PHY. UIC provides 2 service access points
+  to upper layer,
+
+  * UIC_SAP: To transport UPIU between UFS host and UFS device.
+  * UIO_SAP: To issue commands to Unipro layers.
+
+
+3. UFSHCD Overview
+==================
+
+The UFS host controller driver is based on Linux SCSI Framework.
+UFSHCD is a low level device driver which acts as an interface between
+SCSI Midlayer and PCIe based UFS host controllers.
+
+The current UFSHCD implementation supports following functionality,
+
+3.1 UFS controller initialization
+---------------------------------
+
+  The initialization module brings UFS host controller to active state
+  and prepares the controller to transfer commands/response between
+  UFSHCD and UFS device.
+
+3.2 UTP Transfer requests
+-------------------------
+
+  Transfer request handling module of UFSHCD receives SCSI commands
+  from SCSI Midlayer, forms UPIUs and issues the UPIUs to UFS Host
+  controller. Also, the module decodes, responses received from UFS
+  host controller in the form of UPIUs and intimates the SCSI Midlayer
+  of the status of the command.
+
+3.3 UFS error handling
+----------------------
+
+  Error handling module handles Host controller fatal errors,
+  Device fatal errors and UIC interconnect layer related errors.
+
+3.4 SCSI Error handling
+-----------------------
+
+  This is done through UFSHCD SCSI error handling routines registered
+  with SCSI Midlayer. Examples of some of the error handling commands
+  issues by SCSI Midlayer are Abort task, Lun reset and host reset.
+  UFSHCD Routines to perform these tasks are registered with
+  SCSI Midlayer through .eh_abort_handler, .eh_device_reset_handler and
+  .eh_host_reset_handler.
+
+In this version of UFSHCD Query requests and power management
+functionality are not implemented.
+
+4. BSG Support
+==============
+
+This transport driver supports exchanging UFS protocol information units
+(UPIUs) with a UFS device. Typically, user space will allocate
+struct ufs_bsg_request and struct ufs_bsg_reply (see ufs_bsg.h) as
+request_upiu and reply_upiu respectively.  Filling those UPIUs should
+be done in accordance with JEDEC spec UFS2.1 paragraph 10.7.
+*Caveat emptor*: The driver makes no further input validations and sends the
+UPIU to the device as it is.  Open the bsg device in /dev/ufs-bsg and
+send SG_IO with the applicable sg_io_v4::
+
+	io_hdr_v4.guard = 'Q';
+	io_hdr_v4.protocol = BSG_PROTOCOL_SCSI;
+	io_hdr_v4.subprotocol = BSG_SUB_PROTOCOL_SCSI_TRANSPORT;
+	io_hdr_v4.response = (__u64)reply_upiu;
+	io_hdr_v4.max_response_len = reply_len;
+	io_hdr_v4.request_len = request_len;
+	io_hdr_v4.request = (__u64)request_upiu;
+	if (dir == SG_DXFER_TO_DEV) {
+		io_hdr_v4.dout_xfer_len = (uint32_t)byte_cnt;
+		io_hdr_v4.dout_xferp = (uintptr_t)(__u64)buff;
+	} else {
+		io_hdr_v4.din_xfer_len = (uint32_t)byte_cnt;
+		io_hdr_v4.din_xferp = (uintptr_t)(__u64)buff;
+	}
+
+If you wish to read or write a descriptor, use the appropriate xferp of
+sg_io_v4.
+
+The userspace tool that interacts with the ufs-bsg endpoint and uses its
+upiu-based protocol is available at:
+
+	https://github.com/westerndigitalcorporation/ufs-tool
+
+For more detailed information about the tool and its supported
+features, please see the tool's README.
+
+UFS Specifications can be found at:
+
+- UFS - http://www.jedec.org/sites/default/files/docs/JESD220.pdf
+- UFSHCI - http://www.jedec.org/sites/default/files/docs/JESD223.pdf
diff --git a/Documentation/scsi/ufs.txt b/Documentation/scsi/ufs.txt
deleted file mode 100644
index 81842ec..0000000
--- a/Documentation/scsi/ufs.txt
+++ /dev/null
@@ -1,171 +0,0 @@
-                       Universal Flash Storage
-                       =======================
-
-
-Contents
---------
-
-1. Overview
-2. UFS Architecture Overview
-  2.1 Application Layer
-  2.2 UFS Transport Protocol(UTP) layer
-  2.3 UFS Interconnect(UIC) Layer
-3. UFSHCD Overview
-  3.1 UFS controller initialization
-  3.2 UTP Transfer requests
-  3.3 UFS error handling
-  3.4 SCSI Error handling
-
-
-1. Overview
------------
-
-Universal Flash Storage(UFS) is a storage specification for flash devices.
-It is aimed to provide a universal storage interface for both
-embedded and removable flash memory based storage in mobile
-devices such as smart phones and tablet computers. The specification
-is defined by JEDEC Solid State Technology Association. UFS is based
-on MIPI M-PHY physical layer standard. UFS uses MIPI M-PHY as the
-physical layer and MIPI Unipro as the link layer.
-
-The main goals of UFS is to provide,
- * Optimized performance:
-   For UFS version 1.0 and 1.1 the target performance is as follows,
-   Support for Gear1 is mandatory (rate A: 1248Mbps, rate B: 1457.6Mbps)
-   Support for Gear2 is optional (rate A: 2496Mbps, rate B: 2915.2Mbps)
-   Future version of the standard,
-   Gear3 (rate A: 4992Mbps, rate B: 5830.4Mbps)
- * Low power consumption
- * High random IOPs and low latency
-
-
-2. UFS Architecture Overview
-----------------------------
-
-UFS has a layered communication architecture which is based on SCSI
-SAM-5 architectural model.
-
-UFS communication architecture consists of following layers,
-
-2.1 Application Layer
-
-  The Application layer is composed of UFS command set layer(UCS),
-  Task Manager and Device manager. The UFS interface is designed to be
-  protocol agnostic, however SCSI has been selected as a baseline
-  protocol for versions 1.0 and 1.1 of UFS protocol  layer.
-  UFS supports subset of SCSI commands defined by SPC-4 and SBC-3.
-  * UCS: It handles SCSI commands supported by UFS specification.
-  * Task manager: It handles task management functions defined by the
-     UFS which are meant for command queue control.
-  * Device manager: It handles device level operations and device
-     configuration operations. Device level operations mainly involve
-     device power management operations and commands to Interconnect
-     layers. Device level configurations involve handling of query
-     requests which are used to modify and retrieve configuration
-     information of the device.
-
-2.2 UFS Transport Protocol(UTP) layer
-
-  UTP layer provides services for
-  the higher layers through Service Access Points. UTP defines 3
-  service access points for higher layers.
-  * UDM_SAP: Device manager service access point is exposed to device
-    manager for device level operations. These device level operations
-    are done through query requests.
-  * UTP_CMD_SAP: Command service access point is exposed to UFS command
-    set layer(UCS) to transport commands.
-  * UTP_TM_SAP: Task management service access point is exposed to task
-    manager to transport task management functions.
-  UTP transports messages through UFS protocol information unit(UPIU).
-
-2.3 UFS Interconnect(UIC) Layer
-
-  UIC is the lowest layer of UFS layered architecture. It handles
-  connection between UFS host and UFS device. UIC consists of
-  MIPI UniPro and MIPI M-PHY. UIC provides 2 service access points
-  to upper layer,
-  * UIC_SAP: To transport UPIU between UFS host and UFS device.
-  * UIO_SAP: To issue commands to Unipro layers.
-
-
-3. UFSHCD Overview
-------------------
-
-The UFS host controller driver is based on Linux SCSI Framework.
-UFSHCD is a low level device driver which acts as an interface between
-SCSI Midlayer and PCIe based UFS host controllers.
-
-The current UFSHCD implementation supports following functionality,
-
-3.1 UFS controller initialization
-
-  The initialization module brings UFS host controller to active state
-  and prepares the controller to transfer commands/response between
-  UFSHCD and UFS device.
-
-3.2 UTP Transfer requests
-
-  Transfer request handling module of UFSHCD receives SCSI commands
-  from SCSI Midlayer, forms UPIUs and issues the UPIUs to UFS Host
-  controller. Also, the module decodes, responses received from UFS
-  host controller in the form of UPIUs and intimates the SCSI Midlayer
-  of the status of the command.
-
-3.3 UFS error handling
-
-  Error handling module handles Host controller fatal errors,
-  Device fatal errors and UIC interconnect layer related errors.
-
-3.4 SCSI Error handling
-
-  This is done through UFSHCD SCSI error handling routines registered
-  with SCSI Midlayer. Examples of some of the error handling commands
-  issues by SCSI Midlayer are Abort task, Lun reset and host reset.
-  UFSHCD Routines to perform these tasks are registered with
-  SCSI Midlayer through .eh_abort_handler, .eh_device_reset_handler and
-  .eh_host_reset_handler.
-
-In this version of UFSHCD Query requests and power management
-functionality are not implemented.
-
-4. BSG Support
-------------------
-
-This transport driver supports exchanging UFS protocol information units
-(UPIUs) with a UFS device. Typically, user space will allocate
-struct ufs_bsg_request and struct ufs_bsg_reply (see ufs_bsg.h) as
-request_upiu and reply_upiu respectively.  Filling those UPIUs should
-be done in accordance with JEDEC spec UFS2.1 paragraph 10.7.
-*Caveat emptor*: The driver makes no further input validations and sends the
-UPIU to the device as it is.  Open the bsg device in /dev/ufs-bsg and
-send SG_IO with the applicable sg_io_v4:
-
-	io_hdr_v4.guard = 'Q';
-	io_hdr_v4.protocol = BSG_PROTOCOL_SCSI;
-	io_hdr_v4.subprotocol = BSG_SUB_PROTOCOL_SCSI_TRANSPORT;
-	io_hdr_v4.response = (__u64)reply_upiu;
-	io_hdr_v4.max_response_len = reply_len;
-	io_hdr_v4.request_len = request_len;
-	io_hdr_v4.request = (__u64)request_upiu;
-	if (dir == SG_DXFER_TO_DEV) {
-		io_hdr_v4.dout_xfer_len = (uint32_t)byte_cnt;
-		io_hdr_v4.dout_xferp = (uintptr_t)(__u64)buff;
-	} else {
-		io_hdr_v4.din_xfer_len = (uint32_t)byte_cnt;
-		io_hdr_v4.din_xferp = (uintptr_t)(__u64)buff;
-	}
-
-If you wish to read or write a descriptor, use the appropriate xferp of
-sg_io_v4.
-
-The userspace tool that interacts with the ufs-bsg endpoint and uses its
-upiu-based protocol is available at:
-
-	https://github.com/westerndigitalcorporation/ufs-tool
-
-For more detailed information about the tool and its supported
-features, please see the tool's README.
-
-UFS Specifications can be found at,
-UFS - http://www.jedec.org/sites/default/files/docs/JESD220.pdf
-UFSHCI - http://www.jedec.org/sites/default/files/docs/JESD223.pdf
diff --git a/Documentation/scsi/wd719x.rst b/Documentation/scsi/wd719x.rst
new file mode 100644
index 0000000..a35015d
--- /dev/null
+++ b/Documentation/scsi/wd719x.rst
@@ -0,0 +1,24 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===============================================================
+Driver for Western Digital WD7193, WD7197 and WD7296 SCSI cards
+===============================================================
+
+The card requires firmware that can be cut out of the Windows NT driver that
+can be downloaded from WD at:
+http://support.wdc.com/product/download.asp?groupid=801&sid=27&lang=en
+
+There is no license anywhere in the file or on the page - so the firmware
+probably cannot be added to linux-firmware.
+
+This script downloads and extracts the firmware, creating wd719x-risc.bin and
+d719x-wcs.bin files. Put them in /lib/firmware/::
+
+	#!/bin/sh
+	wget http://support.wdc.com/download/archive/pciscsi.exe
+	lha xi pciscsi.exe pci-scsi.exe
+	lha xi pci-scsi.exe nt/wd7296a.sys
+	rm pci-scsi.exe
+	dd if=wd7296a.sys of=wd719x-risc.bin bs=1 skip=5760 count=14336
+	dd if=wd7296a.sys of=wd719x-wcs.bin bs=1 skip=20096 count=514
+	rm wd7296a.sys
diff --git a/Documentation/scsi/wd719x.txt b/Documentation/scsi/wd719x.txt
deleted file mode 100644
index 0816b02..0000000
--- a/Documentation/scsi/wd719x.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Driver for Western Digital WD7193, WD7197 and WD7296 SCSI cards
----------------------------------------------------------------
-
-The card requires firmware that can be cut out of the Windows NT driver that
-can be downloaded from WD at:
-http://support.wdc.com/product/download.asp?groupid=801&sid=27&lang=en
-
-There is no license anywhere in the file or on the page - so the firmware
-probably cannot be added to linux-firmware.
-
-This script downloads and extracts the firmware, creating wd719x-risc.bin and
-d719x-wcs.bin files. Put them in /lib/firmware/.
-
-#!/bin/sh
-wget http://support.wdc.com/download/archive/pciscsi.exe
-lha xi pciscsi.exe pci-scsi.exe
-lha xi pci-scsi.exe nt/wd7296a.sys
-rm pci-scsi.exe
-dd if=wd7296a.sys of=wd719x-risc.bin bs=1 skip=5760 count=14336
-dd if=wd7296a.sys of=wd719x-wcs.bin bs=1 skip=20096 count=514
-rm wd7296a.sys
diff --git a/Documentation/sound/alsa-configuration.rst b/Documentation/sound/alsa-configuration.rst
index 392875a..72f97d4 100644
--- a/Documentation/sound/alsa-configuration.rst
+++ b/Documentation/sound/alsa-configuration.rst
@@ -2234,6 +2234,19 @@
     buffers.  If mmap is used on such architectures, turn off this
     option, so that the DMA-coherent buffers are allocated and used
     instead.
+delayed_register
+    The option is needed for devices that have multiple streams
+    defined in multiple USB interfaces.  The driver may invoke
+    registrations multiple times (once per interface) and this may
+    lead to the insufficient device enumeration.
+    This option receives an array of strings, and you can pass
+    ID:INTERFACE like ``0123abcd:4`` for performing the delayed
+    registration to the given device.  In this example, when a USB
+    device 0123:abcd is probed, the driver waits the registration
+    until the USB interface 4 gets probed.
+    The driver prints a message like "Found post-registration device
+    assignment: 1234abcd:04" for such a device, so that user can
+    notice the need.
 
 This module supports multiple devices, autoprobe and hotplugging.
 
diff --git a/Documentation/sound/hd-audio/index.rst b/Documentation/sound/hd-audio/index.rst
index f8a72ff..6e12de9 100644
--- a/Documentation/sound/hd-audio/index.rst
+++ b/Documentation/sound/hd-audio/index.rst
@@ -8,3 +8,4 @@
    models
    controls
    dp-mst
+   realtek-pc-beep
diff --git a/Documentation/sound/hd-audio/models.rst b/Documentation/sound/hd-audio/models.rst
index 11298f0..0ea967d 100644
--- a/Documentation/sound/hd-audio/models.rst
+++ b/Documentation/sound/hd-audio/models.rst
@@ -216,8 +216,6 @@
     ALC298 fixups on Dell AIO machines
 alc275-dell-xps
     ALC275 fixups on Dell XPS models
-alc256-dell-xps13
-    ALC256 fixups on Dell XPS13
 lenovo-spk-noise
     Workaround for speaker noise on Lenovo machines
 lenovo-hotkey
diff --git a/Documentation/sound/hd-audio/realtek-pc-beep.rst b/Documentation/sound/hd-audio/realtek-pc-beep.rst
new file mode 100644
index 0000000..be47c6f
--- /dev/null
+++ b/Documentation/sound/hd-audio/realtek-pc-beep.rst
@@ -0,0 +1,129 @@
+===============================
+Realtek PC Beep Hidden Register
+===============================
+
+This file documents the "PC Beep Hidden Register", which is present in certain
+Realtek HDA codecs and controls a muxer and pair of passthrough mixers that can
+route audio between pins but aren't themselves exposed as HDA widgets. As far
+as I can tell, these hidden routes are designed to allow flexible PC Beep output
+for codecs that don't have mixer widgets in their output paths. Why it's easier
+to hide a mixer behind an undocumented vendor register than to just expose it
+as a widget, I have no idea.
+
+Register Description
+====================
+
+The register is accessed via processing coefficient 0x36 on NID 20h. Bits not
+identified below have no discernible effect on my machine, a Dell XPS 13 9350::
+
+  MSB                           LSB
+  +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+  | |h|S|L|         | B |R|       | Known bits
+  +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
+  |0|0|1|1|  0x7  |0|0x0|1|  0x7  | Reset value
+  +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+
+1Ah input select (B): 2 bits
+  When zero, expose the PC Beep line (from the internal beep generator, when
+  enabled with the Set Beep Generation verb on NID 01h, or else from the
+  external PCBEEP pin) on the 1Ah pin node. When nonzero, expose the headphone
+  jack (or possibly Line In on some machines) input instead. If PC Beep is
+  selected, the 1Ah boost control has no effect.
+
+Amplify 1Ah loopback, left (L): 1 bit
+  Amplify the left channel of 1Ah before mixing it into outputs as specified
+  by h and S bits. Does not affect the level of 1Ah exposed to other widgets.
+
+Amplify 1Ah loopback, right (R): 1 bit
+  Amplify the right channel of 1Ah before mixing it into outputs as specified
+  by h and S bits. Does not affect the level of 1Ah exposed to other widgets.
+
+Loopback 1Ah to 21h [active low] (h): 1 bit
+  When zero, mix 1Ah (possibly with amplification, depending on L and R bits)
+  into 21h (headphone jack on my machine). Mixed signal respects the mute
+  setting on 21h.
+
+Loopback 1Ah to 14h (S): 1 bit
+  When one, mix 1Ah (possibly with amplification, depending on L and R bits)
+  into 14h (internal speaker on my machine). Mixed signal **ignores** the mute
+  setting on 14h and is present whenever 14h is configured as an output.
+
+Path diagrams
+=============
+
+1Ah input selection (DIV is the PC Beep divider set on NID 01h)::
+
+  <Beep generator>   <PCBEEP pin>    <Headphone jack>
+          |                |                |
+          +--DIV--+--!DIV--+       {1Ah boost control}
+                  |                         |
+                  +--(b == 0)--+--(b != 0)--+
+                               |
+               >1Ah (Beep/Headphone Mic/Line In)<
+
+Loopback of 1Ah to 21h/14h::
+
+               <1Ah (Beep/Headphone Mic/Line In)>
+                               |
+                        {amplify if L/R}
+                               |
+                  +-----!h-----+-----S-----+
+                  |                        |
+          {21h mute control}               |
+                  |                        |
+          >21h (Headphone)<     >14h (Internal Speaker)<
+
+Background
+==========
+
+All Realtek HDA codecs have a vendor-defined widget with node ID 20h which
+provides access to a bank of registers that control various codec functions.
+Registers are read and written via the standard HDA processing coefficient
+verbs (Set/Get Coefficient Index, Set/Get Processing Coefficient). The node is
+named "Realtek Vendor Registers" in public datasheets' verb listings and,
+apart from that, is entirely undocumented.
+
+This particular register, exposed at coefficient 0x36 and named in commits from
+Realtek, is of note: unlike most registers, which seem to control detailed
+amplifier parameters not in scope of the HDA specification, it controls audio
+routing which could just as easily have been defined using standard HDA mixer
+and selector widgets.
+
+Specifically, it selects between two sources for the input pin widget with Node
+ID (NID) 1Ah: the widget's signal can come either from an audio jack (on my
+laptop, a Dell XPS 13 9350, it's the headphone jack, but comments in Realtek
+commits indicate that it might be a Line In on some machines) or from the PC
+Beep line (which is itself multiplexed between the codec's internal beep
+generator and external PCBEEP pin, depending on if the beep generator is
+enabled via verbs on NID 01h). Additionally, it can mix (with optional
+amplification) that signal onto the 21h and/or 14h output pins.
+
+The register's reset value is 0x3717, corresponding to PC Beep on 1Ah that is
+then amplified and mixed into both the headphones and the speakers. Not only
+does this violate the HDA specification, which says that "[a vendor defined
+beep input pin] connection may be maintained *only* while the Link reset
+(**RST#**) is asserted", it means that we cannot ignore the register if we care
+about the input that 1Ah would otherwise expose or if the PCBEEP trace is
+poorly shielded and picks up chassis noise (both of which are the case on my
+machine).
+
+Unfortunately, there are lots of ways to get this register configuration wrong.
+Linux, it seems, has gone through most of them. For one, the register resets
+after S3 suspend: judging by existing code, this isn't the case for all vendor
+registers, and it's led to some fixes that improve behavior on cold boot but
+don't last after suspend. Other fixes have successfully switched the 1Ah input
+away from PC Beep but have failed to disable both loopback paths. On my
+machine, this means that the headphone input is amplified and looped back to
+the headphone output, which uses the exact same pins! As you might expect, this
+causes terrible headphone noise, the character of which is controlled by the
+1Ah boost control. (If you've seen instructions online to fix XPS 13 headphone
+noise by changing "Headphone Mic Boost" in ALSA, now you know why.)
+
+The information here has been obtained through black-box reverse engineering of
+the ALC256 codec's behavior and is not guaranteed to be correct. It likely
+also applies for the ALC255, ALC257, ALC235, and ALC236, since those codecs
+seem to be close relatives of the ALC256. (They all share one initialization
+function.) Additionally, other codecs like the ALC225 and ALC285 also have this
+register, judging by existing fixups in ``patch_realtek.c``, but specific
+data (e.g. node IDs, bit positions, pin mappings) for those codecs may differ
+from what I've described here.
diff --git a/Documentation/sound/soc/codec-to-codec.rst b/Documentation/sound/soc/codec-to-codec.rst
index 810109d..4eaa9a0 100644
--- a/Documentation/sound/soc/codec-to-codec.rst
+++ b/Documentation/sound/soc/codec-to-codec.rst
@@ -104,5 +104,10 @@
 dai names ending with "Playback" and "Capture" respectively as dapm core
 will link and power those dais based on the name.
 
-Note that in current device tree there is no way to mark a dai_link
-as codec to codec. However, it may change in future.
+A dai_link in a "simple-audio-card" will automatically be detected as
+codec to codec when all DAIs on the link belong to codec components.
+The dai_link will be initialized with the subset of stream parameters
+(channels, format, sample rate) supported by all DAIs on the link. Since
+there is no way to provide these parameters in the device tree, this is
+mostly useful for communication with simple fixed-function codecs, such
+as a Bluetooth controller or cellular modem.
diff --git a/Documentation/trace/coresight/coresight-ect.rst b/Documentation/trace/coresight/coresight-ect.rst
new file mode 100644
index 0000000..ecc1e57
--- /dev/null
+++ b/Documentation/trace/coresight/coresight-ect.rst
@@ -0,0 +1,222 @@
+.. SPDX-License-Identifier: GPL-2.0
+=============================================
+CoreSight Embedded Cross Trigger (CTI & CTM).
+=============================================
+
+    :Author:   Mike Leach <mike.leach@linaro.org>
+    :Date:     November 2019
+
+Hardware Description
+--------------------
+
+The CoreSight Cross Trigger Interface (CTI) is a hardware device that takes
+individual input and output hardware signals known as triggers to and from
+devices and interconnects them via the Cross Trigger Matrix (CTM) to other
+devices via numbered channels, in order to propagate events between devices.
+
+e.g.::
+
+ 0000000  in_trigs  :::::::
+ 0 C   0----------->:     :             +======>(other CTI channel IO)
+ 0  P  0<-----------:     :             v
+ 0   U 0  out_trigs :     : Channels  *****      :::::::
+ 0000000            : CTI :<=========>*CTM*<====>: CTI :---+
+ #######  in_trigs  :     : (id 0-3)  *****      :::::::   v
+ # ETM #----------->:     :                         ^   #######
+ #     #<-----------:     :                         +---# ETR #
+ ####### out_trigs  :::::::                             #######
+
+The CTI driver enables the programming of the CTI to attach triggers to
+channels. When an input trigger becomes active, the attached channel will
+become active. Any output trigger attached to that channel will also
+become active. The active channel is propagated to other CTIs via the CTM,
+activating connected output triggers there, unless filtered by the CTI
+channel gate.
+
+It is also possible to activate a channel using system software directly
+programming registers in the CTI.
+
+The CTIs are registered by the system to be associated with CPUs and/or other
+CoreSight devices on the trace data path. When these devices are enabled the
+attached CTIs will also be enabled. By default/on power up the CTIs have
+no programmed trigger/channel attachments, so will not affect the system
+until explicitly programmed.
+
+The hardware trigger connections between CTIs and devices is implementation
+defined, unless the CPU/ETM combination is a v8 architecture, in which case
+the connections have an architecturally defined standard layout.
+
+The hardware trigger signals can also be connected to non-CoreSight devices
+(e.g. UART), or be propagated off chip as hardware IO lines.
+
+All the CTI devices are associated with a CTM. On many systems there will be a
+single effective CTM (one CTM, or multiple CTMs all interconnected), but it is
+possible that systems can have nets of CTIs+CTM that are not interconnected by
+a CTM to each other. On these systems a CTM index is declared to associate
+CTI devices that are interconnected via a given CTM.
+
+Sysfs files and directories
+---------------------------
+
+The CTI devices appear on the existing CoreSight bus alongside the other
+CoreSight devices::
+
+    >$ ls /sys/bus/coresight/devices
+     cti_cpu0  cti_cpu2  cti_sys0  etm0  etm2  funnel0  replicator0  tmc_etr0
+     cti_cpu1  cti_cpu3  cti_sys1  etm1  etm3  funnel1  tmc_etf0     tpiu0
+
+The ``cti_cpu<N>`` named CTIs are associated with a CPU, and any ETM used by
+that core. The ``cti_sys<N>`` CTIs are general system infrastructure CTIs that
+can be associated with other CoreSight devices, or other system hardware
+capable of generating or using trigger signals.::
+
+  >$ ls /sys/bus/coresight/devices/etm0/cti_cpu0
+  channels  ctmid  enable  nr_trigger_cons mgmt  power powered  regs
+  subsystem triggers0 triggers1  uevent
+
+*Key file items are:-*
+   * ``enable``: enables/disables the CTI. Read to determine current state.
+     If this shows as enabled (1), but ``powered`` shows unpowered (0), then
+     the enable indicates a request to enabled when the device is powered.
+   * ``ctmid`` : associated CTM - only relevant if system has multiple CTI+CTM
+     clusters that are not interconnected.
+   * ``nr_trigger_cons`` : total connections - triggers<N> directories.
+   * ``powered`` : Read to determine if the CTI is currently powered.
+
+*Sub-directories:-*
+   * ``triggers<N>``: contains list of triggers for an individual connection.
+   * ``channels``: Contains the channel API - CTI main programming interface.
+   * ``regs``: Gives access to the raw programmable CTI regs.
+   * ``mgmt``: the standard CoreSight management registers.
+
+
+triggers<N> directories
+~~~~~~~~~~~~~~~~~~~~~~~
+
+Individual trigger connection information. This describes trigger signals for
+CoreSight and non-CoreSight connections.
+
+Each triggers directory has a set of parameters describing the triggers for
+the connection.
+
+   * ``name`` : name of connection
+   * ``in_signals`` : input trigger signal indexes used in this connection.
+   * ``in_types`` : functional types for in signals.
+   * ``out_signals`` : output trigger signals for this connection.
+   * ``out_types`` : functional types for out signals.
+
+e.g::
+
+    >$ ls ./cti_cpu0/triggers0/
+    in_signals  in_types  name  out_signals  out_types
+    >$ cat ./cti_cpu0/triggers0/name
+    cpu0
+    >$ cat ./cti_cpu0/triggers0/out_signals
+    0-2
+    >$ cat ./cti_cpu0/triggers0/out_types
+    pe_edbgreq pe_dbgrestart pe_ctiirq
+    >$ cat ./cti_cpu0/triggers0/in_signals
+    0-1
+    >$ cat ./cti_cpu0/triggers0/in_types
+    pe_dbgtrigger pe_pmuirq
+
+If a connection has zero signals in either the 'in' or 'out' triggers then
+those parameters will be omitted.
+
+Channels API Directory
+~~~~~~~~~~~~~~~~~~~~~~
+
+This provides an easy way to attach triggers to channels, without needing
+the multiple register operations that are required if manipulating the
+'regs' sub-directory elements directly.
+
+A number of files provide this API::
+
+   >$ ls ./cti_sys0/channels/
+   chan_clear         chan_inuse      chan_xtrigs_out     trigin_attach
+   chan_free          chan_pulse      chan_xtrigs_reset   trigin_detach
+   chan_gate_disable  chan_set        chan_xtrigs_sel     trigout_attach
+   chan_gate_enable   chan_xtrigs_in  trig_filter_enable  trigout_detach
+   trigout_filtered
+
+Most access to these elements take the form::
+
+  echo <chan> [<trigger>] > /<device_path>/<operation>
+
+where the optional <trigger> is only needed for trigXX_attach | detach
+operations.
+
+e.g.::
+
+   >$ echo 0 1 > ./cti_sys0/channels/trigout_attach
+   >$ echo 0 > ./cti_sys0/channels/chan_set
+
+Attaches trigout(1) to channel(0), then activates channel(0) generating a
+set state on cti_sys0.trigout(1)
+
+
+*API operations*
+
+   * ``trigin_attach, trigout_attach``: Attach a channel to a trigger signal.
+   * ``trigin_detach, trigout_detach``: Detach a channel from a trigger signal.
+   * ``chan_set``: Set the channel - the set state will be propagated around
+     the CTM to other connected devices.
+   * ``chan_clear``: Clear the channel.
+   * ``chan_pulse``: Set the channel for a single CoreSight clock cycle.
+   * ``chan_gate_enable``: Write operation sets the CTI gate to propagate
+     (enable) the channel to other devices. This operation takes a channel
+     number. CTI gate is enabled for all channels by default at power up. Read
+     to list the currently enabled channels on the gate.
+   * ``chan_gate_disable``: Write channel number to disable gate for that
+     channel.
+   * ``chan_inuse``: Show the current channels attached to any signal
+   * ``chan_free``: Show channels with no attached signals.
+   * ``chan_xtrigs_sel``: write a channel number to select a channel to view,
+     read to show the selected channel number.
+   * ``chan_xtrigs_in``: Read to show the input triggers attached to
+     the selected view channel.
+   * ``chan_xtrigs_out``:Read to show the output triggers attached to
+     the selected view channel.
+   * ``trig_filter_enable``: Defaults to enabled, disable to allow potentially
+     dangerous output signals to be set.
+   * ``trigout_filtered``: Trigger out signals that are prevented from being
+     set if filtering ``trig_filter_enable`` is enabled. One use is to prevent
+     accidental ``EDBGREQ`` signals stopping a core.
+   * ``chan_xtrigs_reset``: Write 1 to clear all channel / trigger programming.
+     Resets device hardware to default state.
+
+
+The example below attaches input trigger index 1 to channel 2, and output
+trigger index 6 to the same channel. It then examines the state of the
+channel / trigger connections using the appropriate sysfs attributes.
+
+The settings mean that if either input trigger 1, or channel 2 go active then
+trigger out 6 will go active. We then enable the CTI, and use the software
+channel control to activate channel 2. We see the active channel on the
+``choutstatus`` register and the active signal on the ``trigoutstatus``
+register. Finally clearing the channel removes this.
+
+e.g.::
+
+   .../cti_sys0/channels# echo 2 1 > trigin_attach
+   .../cti_sys0/channels# echo 2 6 > trigout_attach
+   .../cti_sys0/channels# cat chan_free
+   0-1,3
+   .../cti_sys0/channels# cat chan_inuse
+   2
+   .../cti_sys0/channels# echo 2 > chan_xtrigs_sel
+   .../cti_sys0/channels# cat chan_xtrigs_trigin
+   1
+   .../cti_sys0/channels# cat chan_xtrigs_trigout
+   6
+   .../cti_sys0/# echo 1 > enable
+   .../cti_sys0/channels# echo 2 > chan_set
+   .../cti_sys0/channels# cat ../regs/choutstatus
+   0x4
+   .../cti_sys0/channels# cat ../regs/trigoutstatus
+   0x40
+   .../cti_sys0/channels# echo 2 > chan_clear
+   .../cti_sys0/channels# cat ../regs/trigoutstatus
+   0x0
+   .../cti_sys0/channels# cat ../regs/choutstatus
+   0x0
diff --git a/Documentation/trace/coresight/coresight.rst b/Documentation/trace/coresight/coresight.rst
index a566719..108600e 100644
--- a/Documentation/trace/coresight/coresight.rst
+++ b/Documentation/trace/coresight/coresight.rst
@@ -491,8 +491,21 @@
 
 Details on how to use the generic STM API can be found here:- :doc:`../stm` [#second]_.
 
+The CTI & CTM Modules
+---------------------
+
+The CTI (Cross Trigger Interface) provides a set of trigger signals between
+individual CTIs and components, and can propagate these between all CTIs via
+channels on the CTM (Cross Trigger Matrix).
+
+A separate documentation file is provided to explain the use of these devices.
+(:doc:`coresight-ect`) [#fourth]_.
+
+
 .. [#first] Documentation/ABI/testing/sysfs-bus-coresight-devices-stm
 
 .. [#second] Documentation/trace/stm.rst
 
 .. [#third] https://github.com/Linaro/perf-opencsd
+
+.. [#fourth] Documentation/trace/coresight/coresight-ect.rst
diff --git a/Documentation/trace/ftrace.rst b/Documentation/trace/ftrace.rst
index ff658e2..3b5614b 100644
--- a/Documentation/trace/ftrace.rst
+++ b/Documentation/trace/ftrace.rst
@@ -125,10 +125,13 @@
   trace:
 
 	This file holds the output of the trace in a human
-	readable format (described below). Note, tracing is temporarily
-	disabled when the file is open for reading. Once all readers
-	are closed, tracing is re-enabled. Opening this file for
+	readable format (described below). Opening this file for
 	writing with the O_TRUNC flag clears the ring buffer content.
+        Note, this file is not a consumer. If tracing is off
+        (no tracer running, or tracing_on is zero), it will produce
+        the same output each time it is read. When tracing is on,
+        it may produce inconsistent results as it tries to read
+        the entire buffer without consuming it.
 
   trace_pipe:
 
@@ -142,9 +145,7 @@
 	will not be read again with a sequential read. The
 	"trace" file is static, and if the tracer is not
 	adding more data, it will display the same
-	information every time it is read. Unlike the
-	"trace" file, opening this file for reading will not
-	temporarily disable tracing.
+	information every time it is read.
 
   trace_options:
 
@@ -262,6 +263,20 @@
 	traced by the function tracer as well. This option will also
 	cause PIDs of tasks that exit to be removed from the file.
 
+  set_ftrace_notrace_pid:
+
+        Have the function tracer ignore threads whose PID are listed in
+        this file.
+
+        If the "function-fork" option is set, then when a task whose
+	PID is listed in this file forks, the child's PID will
+	automatically be added to this file, and the child will not be
+	traced by the function tracer as well. This option will also
+	cause PIDs of tasks that exit to be removed from the file.
+
+        If a PID is in both this file and "set_ftrace_pid", then this
+        file takes precedence, and the thread will not be traced.
+
   set_event_pid:
 
 	Have the events only trace a task with a PID listed in this file.
@@ -273,6 +288,19 @@
 	cause the PIDs of tasks to be removed from this file when the task
 	exits.
 
+  set_event_notrace_pid:
+
+	Have the events not trace a task with a PID listed in this file.
+	Note, sched_switch and sched_wakeup will trace threads not listed
+	in this file, even if a thread's PID is in the file if the
+        sched_switch or sched_wakeup events also trace a thread that should
+        be traced.
+
+	To have the PIDs of children of tasks with their PID in this file
+	added on fork, enable the "event-fork" option. That option will also
+	cause the PIDs of tasks to be removed from this file when the task
+	exits.
+
   set_graph_function:
 
 	Functions listed in this file will cause the function graph
@@ -1125,6 +1153,12 @@
 	the trace displays additional information about the
 	latency, as described in "Latency trace format".
 
+  pause-on-trace
+	When set, opening the trace file for read, will pause
+	writing to the ring buffer (as if tracing_on was set to zero).
+	This simulates the original behavior of the trace file.
+	When the file is closed, tracing will be enabled again.
+
   record-cmd
 	When any event or tracer is enabled, a hook is enabled
 	in the sched_switch trace point to fill comm cache
@@ -1176,6 +1210,8 @@
 	tasks fork. Also, when tasks with PIDs in set_event_pid exit,
 	their PIDs will be removed from the file.
 
+        This affects PIDs listed in set_event_notrace_pid as well.
+
   function-trace
 	The latency tracers will enable function tracing
 	if this option is enabled (default it is). When
@@ -1190,6 +1226,8 @@
 	set_ftrace_pid exit, their PIDs will be removed from the
 	file.
 
+        This affects PIDs in set_ftrace_notrace_pid as well.
+
   display-graph
 	When set, the latency tracers (irqsoff, wakeup, etc) will
 	use function graph tracing instead of function tracing.
@@ -2126,6 +2164,8 @@
   # cat trace
   # tracer: hwlat
   #
+  # entries-in-buffer/entries-written: 13/13   #P:8
+  #
   #                              _-----=> irqs-off
   #                             / _----=> need-resched
   #                            | / _---=> hardirq/softirq
@@ -2133,12 +2173,18 @@
   #                            ||| /     delay
   #           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
   #              | |       |   ||||       |         |
-             <...>-3638  [001] d... 19452.055471: #1     inner/outer(us):   12/14    ts:1499801089.066141940
-             <...>-3638  [003] d... 19454.071354: #2     inner/outer(us):   11/9     ts:1499801091.082164365
-             <...>-3638  [002] dn.. 19461.126852: #3     inner/outer(us):   12/9     ts:1499801098.138150062
-             <...>-3638  [001] d... 19488.340960: #4     inner/outer(us):    8/12    ts:1499801125.354139633
-             <...>-3638  [003] d... 19494.388553: #5     inner/outer(us):    8/12    ts:1499801131.402150961
-             <...>-3638  [003] d... 19501.283419: #6     inner/outer(us):    0/12    ts:1499801138.297435289 nmi-total:4 nmi-count:1
+             <...>-1729  [001] d...   678.473449: #1     inner/outer(us):   11/12    ts:1581527483.343962693 count:6
+             <...>-1729  [004] d...   689.556542: #2     inner/outer(us):   16/9     ts:1581527494.889008092 count:1
+             <...>-1729  [005] d...   714.756290: #3     inner/outer(us):   16/16    ts:1581527519.678961629 count:5
+             <...>-1729  [001] d...   718.788247: #4     inner/outer(us):    9/17    ts:1581527523.889012713 count:1
+             <...>-1729  [002] d...   719.796341: #5     inner/outer(us):   13/9     ts:1581527524.912872606 count:1
+             <...>-1729  [006] d...   844.787091: #6     inner/outer(us):    9/12    ts:1581527649.889048502 count:2
+             <...>-1729  [003] d...   849.827033: #7     inner/outer(us):   18/9     ts:1581527654.889013793 count:1
+             <...>-1729  [007] d...   853.859002: #8     inner/outer(us):    9/12    ts:1581527658.889065736 count:1
+             <...>-1729  [001] d...   855.874978: #9     inner/outer(us):    9/11    ts:1581527660.861991877 count:1
+             <...>-1729  [001] d...   863.938932: #10    inner/outer(us):    9/11    ts:1581527668.970010500 count:1 nmi-total:7 nmi-count:1
+             <...>-1729  [007] d...   878.050780: #11    inner/outer(us):    9/12    ts:1581527683.385002600 count:1 nmi-total:5 nmi-count:1
+             <...>-1729  [007] d...   886.114702: #12    inner/outer(us):    9/12    ts:1581527691.385001600 count:1
 
 
 The above output is somewhat the same in the header. All events will have
@@ -2148,7 +2194,7 @@
 	This is the count of events recorded that were greater than the
 	tracing_threshold (See below).
 
- inner/outer(us):   12/14
+ inner/outer(us):   11/11
 
       This shows two numbers as "inner latency" and "outer latency". The test
       runs in a loop checking a timestamp twice. The latency detected within
@@ -2156,11 +2202,15 @@
       after the previous timestamp and the next timestamp in the loop is
       the "outer latency".
 
- ts:1499801089.066141940
+ ts:1581527483.343962693
 
-      The absolute timestamp that the event happened.
+      The absolute timestamp that the first latency was recorded in the window.
 
- nmi-total:4 nmi-count:1
+ count:6
+
+      The number of times a latency was detected during the window.
+
+ nmi-total:7 nmi-count:1
 
       On architectures that support it, if an NMI comes in during the
       test, the time spent in NMI is reported in "nmi-total" (in
diff --git a/Documentation/vm/.gitignore b/Documentation/vm/.gitignore
index 09b164a..bc74f56 100644
--- a/Documentation/vm/.gitignore
+++ b/Documentation/vm/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 page-types
 slabinfo
diff --git a/Documentation/vm/free_page_reporting.rst b/Documentation/vm/free_page_reporting.rst
new file mode 100644
index 0000000..8c05e62
--- /dev/null
+++ b/Documentation/vm/free_page_reporting.rst
@@ -0,0 +1,40 @@
+.. _free_page_reporting:
+
+=====================
+Free Page Reporting
+=====================
+
+Free page reporting is an API by which a device can register to receive
+lists of pages that are currently unused by the system. This is useful in
+the case of virtualization where a guest is then able to use this data to
+notify the hypervisor that it is no longer using certain pages in memory.
+
+For the driver, typically a balloon driver, to use of this functionality
+it will allocate and initialize a page_reporting_dev_info structure. The
+field within the structure it will populate is the "report" function
+pointer used to process the scatterlist. It must also guarantee that it can
+handle at least PAGE_REPORTING_CAPACITY worth of scatterlist entries per
+call to the function. A call to page_reporting_register will register the
+page reporting interface with the reporting framework assuming no other
+page reporting devices are already registered.
+
+Once registered the page reporting API will begin reporting batches of
+pages to the driver. The API will start reporting pages 2 seconds after
+the interface is registered and will continue to do so 2 seconds after any
+page of a sufficiently high order is freed.
+
+Pages reported will be stored in the scatterlist passed to the reporting
+function with the final entry having the end bit set in entry nent - 1.
+While pages are being processed by the report function they will not be
+accessible to the allocator. Once the report function has been completed
+the pages will be returned to the free area from which they were obtained.
+
+Prior to removing a driver that is making use of free page reporting it
+is necessary to call page_reporting_unregister to have the
+page_reporting_dev_info structure that is currently in use by free page
+reporting removed. Doing this will prevent further reports from being
+issued via the interface. If another driver or the same driver is
+registered it is possible for it to resume where the previous driver had
+left off in terms of reporting free pages.
+
+Alexander Duyck, Dec 04, 2019
diff --git a/Documentation/vm/zswap.rst b/Documentation/vm/zswap.rst
index 61f6185..f8c6a79 100644
--- a/Documentation/vm/zswap.rst
+++ b/Documentation/vm/zswap.rst
@@ -35,9 +35,11 @@
 device when the compressed pool reaches its size limit.  This requirement had
 been identified in prior community discussions.
 
-Zswap is disabled by default but can be enabled at boot time by setting
-the ``enabled`` attribute to 1 at boot time. ie: ``zswap.enabled=1``.  Zswap
-can also be enabled and disabled at runtime using the sysfs interface.
+Whether Zswap is enabled at the boot time depends on whether
+the ``CONFIG_ZSWAP_DEFAULT_ON`` Kconfig option is enabled or not.
+This setting can then be overridden by providing the kernel command line
+``zswap.enabled=`` option, for example ``zswap.enabled=0``.
+Zswap can also be enabled and disabled at runtime using the sysfs interface.
 An example command to enable zswap at runtime, assuming sysfs is mounted
 at ``/sys``, is::
 
@@ -64,9 +66,10 @@
 returned by the allocation routine and that handle must be mapped before being
 accessed.  The compressed memory pool grows on demand and shrinks as compressed
 pages are freed.  The pool is not preallocated.  By default, a zpool
-of type zbud is created, but it can be selected at boot time by
-setting the ``zpool`` attribute, e.g. ``zswap.zpool=zbud``. It can
-also be changed at runtime using the sysfs ``zpool`` attribute, e.g.::
+of type selected in ``CONFIG_ZSWAP_ZPOOL_DEFAULT`` Kconfig option is created,
+but it can be overridden at boot time by setting the ``zpool`` attribute,
+e.g. ``zswap.zpool=zbud``. It can also be changed at runtime using the sysfs
+``zpool`` attribute, e.g.::
 
 	echo zbud > /sys/module/zswap/parameters/zpool
 
@@ -97,8 +100,9 @@
 * max_pool_percent - The maximum percentage of memory that the compressed
   pool can occupy.
 
-The default compressor is lzo, but it can be selected at boot time by
-setting the ``compressor`` attribute, e.g. ``zswap.compressor=lzo``.
+The default compressor is selected in ``CONFIG_ZSWAP_COMPRESSOR_DEFAULT``
+Kconfig option, but it can be overridden at boot time by setting the
+``compressor`` attribute, e.g. ``zswap.compressor=lzo``.
 It can also be changed at runtime using the sysfs "compressor"
 attribute, e.g.::
 
diff --git a/Documentation/x86/boot.rst b/Documentation/x86/boot.rst
index fa7ddc0..5325c71 100644
--- a/Documentation/x86/boot.rst
+++ b/Documentation/x86/boot.rst
@@ -1399,8 +1399,8 @@
 must be __BOOT_DS; interrupt must be disabled; %rsi must hold the base
 address of the struct boot_params.
 
-EFI Handover Protocol
-=====================
+EFI Handover Protocol (deprecated)
+==================================
 
 This protocol allows boot loaders to defer initialisation to the EFI
 boot stub. The boot loader is required to load the kernel/initrd(s)
@@ -1408,6 +1408,12 @@
 which is hdr->handover_offset bytes from the beginning of
 startup_{32,64}.
 
+The boot loader MUST respect the kernel's PE/COFF metadata when it comes
+to section alignment, the memory footprint of the executable image beyond
+the size of the file itself, and any other aspect of the PE/COFF header
+that may affect correct operation of the image as a PE/COFF binary in the
+execution context provided by the EFI firmware.
+
 The function prototype for the handover entry point looks like this::
 
     efi_main(void *handle, efi_system_table_t *table, struct boot_params *bp)
@@ -1419,9 +1425,18 @@
 
 The boot loader *must* fill out the following fields in bp::
 
-  - hdr.code32_start
   - hdr.cmd_line_ptr
   - hdr.ramdisk_image (if applicable)
   - hdr.ramdisk_size  (if applicable)
 
 All other fields should be zero.
+
+NOTE: The EFI Handover Protocol is deprecated in favour of the ordinary PE/COFF
+      entry point, combined with the LINUX_EFI_INITRD_MEDIA_GUID based initrd
+      loading protocol (refer to [0] for an example of the bootloader side of
+      this), which removes the need for any knowledge on the part of the EFI
+      bootloader regarding the internal representation of boot_params or any
+      requirements/limitations regarding the placement of the command line
+      and ramdisk in memory, or the placement of the kernel image itself.
+
+[0] https://github.com/u-boot/u-boot/commit/ec80b4735a593961fe701cc3a5d717d4739b0fd0
diff --git a/MAINTAINERS b/MAINTAINERS
index 6849e8d..de7eb50 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -77,21 +77,13 @@
 
 8.	Happy hacking.
 
-Descriptions of section entries
--------------------------------
+Descriptions of section entries and preferred order
+---------------------------------------------------
 
 	M: *Mail* patches to: FullName <address@domain>
 	R: Designated *Reviewer*: FullName <address@domain>
 	   These reviewers should be CCed on patches.
 	L: *Mailing list* that is relevant to this area
-	W: *Web-page* with status/info
-	B: URI for where to file *bugs*. A web-page with detailed bug
-	   filing info, a direct bug tracker link, or a mailto: URI.
-	C: URI for *chat* protocol, server and channel where developers
-	   usually hang out, for example irc://server/channel.
-	Q: *Patchwork* web based patch tracking system site
-	T: *SCM* tree type and location.
-	   Type is one of: git, hg, quilt, stgit, topgit
 	S: *Status*, one of the following:
 	   Supported:	Someone is actually paid to look after this.
 	   Maintained:	Someone actually looks after it.
@@ -102,30 +94,39 @@
 	   Obsolete:	Old code. Something tagged obsolete generally means
 			it has been replaced by a better system and you
 			should be using that.
+	W: *Web-page* with status/info
+	Q: *Patchwork* web based patch tracking system site
+	B: URI for where to file *bugs*. A web-page with detailed bug
+	   filing info, a direct bug tracker link, or a mailto: URI.
+	C: URI for *chat* protocol, server and channel where developers
+	   usually hang out, for example irc://server/channel.
 	P: Subsystem Profile document for more details submitting
 	   patches to the given subsystem. This is either an in-tree file,
 	   or a URI. See Documentation/maintainer/maintainer-entry-profile.rst
 	   for details.
+	T: *SCM* tree type and location.
+	   Type is one of: git, hg, quilt, stgit, topgit
 	F: *Files* and directories wildcard patterns.
 	   A trailing slash includes all files and subdirectory files.
 	   F:	drivers/net/	all files in and below drivers/net
 	   F:	drivers/net/*	all files in drivers/net, but not below
 	   F:	*/net/*		all files in "any top level directory"/net
 	   One pattern per line.  Multiple F: lines acceptable.
-	N: Files and directories *Regex* patterns.
-	   N:	[^a-z]tegra	all files whose path contains the word tegra
-	   One pattern per line.  Multiple N: lines acceptable.
-	   scripts/get_maintainer.pl has different behavior for files that
-	   match F: pattern and matches of N: patterns.  By default,
-	   get_maintainer will not look at git log history when an F: pattern
-	   match occurs.  When an N: match occurs, git log history is used
-	   to also notify the people that have git commit signatures.
 	X: *Excluded* files and directories that are NOT maintained, same
 	   rules as F:. Files exclusions are tested before file matches.
 	   Can be useful for excluding a specific subdirectory, for instance:
 	   F:	net/
 	   X:	net/ipv6/
 	   matches all files in and below net excluding net/ipv6/
+	N: Files and directories *Regex* patterns.
+	   N:	[^a-z]tegra	all files whose path contains tegra
+	                        (not including files like integrator)
+	   One pattern per line.  Multiple N: lines acceptable.
+	   scripts/get_maintainer.pl has different behavior for files that
+	   match F: pattern and matches of N: patterns.  By default,
+	   get_maintainer will not look at git log history when an F: pattern
+	   match occurs.  When an N: match occurs, git log history is used
+	   to also notify the people that have git commit signatures.
 	K: *Content regex* (perl extended) pattern match in a patch or file.
 	   For instance:
 	   K: of_get_profile
@@ -158,8 +159,8 @@
 3WARE SAS/SATA-RAID SCSI DRIVERS (3W-XXXX, 3W-9XXX, 3W-SAS)
 M:	Adam Radford <aradford@gmail.com>
 L:	linux-scsi@vger.kernel.org
-W:	http://www.lsi.com
 S:	Supported
+W:	http://www.lsi.com
 F:	drivers/scsi/3w-*
 
 53C700 AND 53C700-66 SCSI DRIVER
@@ -174,9 +175,9 @@
 L:	linux-bluetooth@vger.kernel.org
 L:	linux-wpan@vger.kernel.org
 S:	Maintained
-F:	net/6lowpan/
-F:	include/net/6lowpan.h
 F:	Documentation/networking/6lowpan.rst
+F:	include/net/6lowpan.h
+F:	net/6lowpan/
 
 6PACK NETWORK DRIVER FOR AX.25
 M:	Andreas Koensgen <ajk@comnets.uni-bremen.de>
@@ -184,6 +185,23 @@
 S:	Maintained
 F:	drivers/net/hamradio/6pack.c
 
+802.11 (including CFG80211/NL80211)
+M:	Johannes Berg <johannes@sipsolutions.net>
+L:	linux-wireless@vger.kernel.org
+S:	Maintained
+W:	http://wireless.kernel.org/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
+F:	Documentation/driver-api/80211/cfg80211.rst
+F:	Documentation/networking/regulatory.txt
+F:	include/linux/ieee80211.h
+F:	include/net/cfg80211.h
+F:	include/net/ieee80211_radiotap.h
+F:	include/net/iw_handler.h
+F:	include/net/wext.h
+F:	include/uapi/linux/nl80211.h
+F:	net/wireless/
+
 8169 10/100/1000 GIGABIT ETHERNET DRIVER
 M:	Realtek linux nic maintainers <nic_swsd@realtek.com>
 M:	Heiner Kallweit <hkallweit1@gmail.com>
@@ -209,34 +227,34 @@
 M:	Latchesar Ionkov <lucho@ionkov.net>
 M:	Dominique Martinet <asmadeus@codewreck.org>
 L:	v9fs-developer@lists.sourceforge.net
+S:	Maintained
 W:	http://swik.net/v9fs
 Q:	http://patchwork.kernel.org/project/v9fs-devel/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs.git
 T:	git git://github.com/martinetd/linux.git
-S:	Maintained
 F:	Documentation/filesystems/9p.rst
 F:	fs/9p/
-F:	net/9p/
 F:	include/net/9p/
-F:	include/uapi/linux/virtio_9p.h
 F:	include/trace/events/9p.h
+F:	include/uapi/linux/virtio_9p.h
+F:	net/9p/
 
 A8293 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
-S:	Maintained
 F:	drivers/media/dvb-frontends/a8293*
 
 AACRAID SCSI RAID DRIVER
 M:	Adaptec OEM Raid Solutions <aacraid@microsemi.com>
 L:	linux-scsi@vger.kernel.org
-W:	http://www.adaptec.com/
 S:	Supported
-F:	Documentation/scsi/aacraid.txt
+W:	http://www.adaptec.com/
+F:	Documentation/scsi/aacraid.rst
 F:	drivers/scsi/aacraid/
 
 ABI/API
@@ -319,9 +337,9 @@
 L:	linux-acpi@vger.kernel.org
 S:	Supported
 W:	https://01.org/linux-acpi
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
 Q:	https://patchwork.kernel.org/project/linux-acpi/list/
 B:	https://bugzilla.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
 F:	Documentation/ABI/testing/configfs-acpi
 F:	Documentation/ABI/testing/sysfs-bus-acpi
 F:	Documentation/firmware-guide/acpi/
@@ -352,10 +370,10 @@
 S:	Supported
 W:	https://acpica.org/
 W:	https://github.com/acpica/acpica/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
 Q:	https://patchwork.kernel.org/project/linux-acpi/list/
 B:	https://bugzilla.kernel.org
 B:	https://bugs.acpica.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
 F:	drivers/acpi/acpica/
 F:	include/acpi/
 F:	tools/power/acpi/
@@ -390,9 +408,9 @@
 R:	Mika Westerberg <mika.westerberg@linux.intel.com>
 L:	linux-acpi@vger.kernel.org
 S:	Supported
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
 Q:	https://patchwork.kernel.org/project/linux-acpi/list/
 B:	https://bugzilla.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
 F:	drivers/acpi/pmic/
 
 ACPI THERMAL DRIVER
@@ -418,44 +436,44 @@
 F:	include/uapi/linux/wmi.h
 
 AD1889 ALSA SOUND DRIVER
-W:	https://parisc.wiki.kernel.org/index.php/AD1889
 L:	linux-parisc@vger.kernel.org
 S:	Maintained
+W:	https://parisc.wiki.kernel.org/index.php/AD1889
 F:	sound/pci/ad1889.*
 
 AD525X ANALOG DEVICES DIGITAL POTENTIOMETERS DRIVER
 M:	Michael Hennerich <michael.hennerich@analog.com>
+S:	Supported
 W:	http://wiki.analog.com/AD5254
 W:	http://ez.analog.com/community/linux-device-drivers
-S:	Supported
 F:	drivers/misc/ad525x_dpot.c
 
 AD5398 CURRENT REGULATOR DRIVER (AD5398/AD5821)
 M:	Michael Hennerich <michael.hennerich@analog.com>
+S:	Supported
 W:	http://wiki.analog.com/AD5398
 W:	http://ez.analog.com/community/linux-device-drivers
-S:	Supported
 F:	drivers/regulator/ad5398.c
 
 AD714X CAPACITANCE TOUCH SENSOR DRIVER (AD7142/3/7/8/7A)
 M:	Michael Hennerich <michael.hennerich@analog.com>
+S:	Supported
 W:	http://wiki.analog.com/AD7142
 W:	http://ez.analog.com/community/linux-device-drivers
-S:	Supported
 F:	drivers/input/misc/ad714x.c
 
 AD7877 TOUCHSCREEN DRIVER
 M:	Michael Hennerich <michael.hennerich@analog.com>
+S:	Supported
 W:	http://wiki.analog.com/AD7877
 W:	http://ez.analog.com/community/linux-device-drivers
-S:	Supported
 F:	drivers/input/touchscreen/ad7877.c
 
 AD7879 TOUCHSCREEN DRIVER (AD7879/AD7889)
 M:	Michael Hennerich <michael.hennerich@analog.com>
+S:	Supported
 W:	http://wiki.analog.com/AD7879
 W:	http://ez.analog.com/community/linux-device-drivers
-S:	Supported
 F:	drivers/input/touchscreen/ad7879.c
 
 ADDRESS SPACE LAYOUT RANDOMIZATION (ASLR)
@@ -464,12 +482,12 @@
 
 ADF7242 IEEE 802.15.4 RADIO DRIVER
 M:	Michael Hennerich <michael.hennerich@analog.com>
-W:	https://wiki.analog.com/ADF7242
-W:	http://ez.analog.com/community/linux-device-drivers
 L:	linux-wpan@vger.kernel.org
 S:	Supported
-F:	drivers/net/ieee802154/adf7242.c
+W:	https://wiki.analog.com/ADF7242
+W:	http://ez.analog.com/community/linux-device-drivers
 F:	Documentation/devicetree/bindings/net/ieee802154/adf7242.txt
+F:	drivers/net/ieee802154/adf7242.c
 
 ADM1025 HARDWARE MONITOR DRIVER
 M:	Jean Delvare <jdelvare@suse.com>
@@ -486,8 +504,8 @@
 
 ADM8211 WIRELESS DRIVER
 L:	linux-wireless@vger.kernel.org
-W:	http://wireless.kernel.org/
 S:	Orphan
+W:	http://wireless.kernel.org/
 F:	drivers/net/wireless/admtek/adm8211.*
 
 ADP1653 FLASH CONTROLLER DRIVER
@@ -499,28 +517,28 @@
 
 ADP5520 BACKLIGHT DRIVER WITH IO EXPANDER (ADP5520/ADP5501)
 M:	Michael Hennerich <michael.hennerich@analog.com>
+S:	Supported
 W:	http://wiki.analog.com/ADP5520
 W:	http://ez.analog.com/community/linux-device-drivers
-S:	Supported
-F:	drivers/mfd/adp5520.c
-F:	drivers/video/backlight/adp5520_bl.c
-F:	drivers/leds/leds-adp5520.c
 F:	drivers/gpio/gpio-adp5520.c
 F:	drivers/input/keyboard/adp5520-keys.c
+F:	drivers/leds/leds-adp5520.c
+F:	drivers/mfd/adp5520.c
+F:	drivers/video/backlight/adp5520_bl.c
 
 ADP5588 QWERTY KEYPAD AND IO EXPANDER DRIVER (ADP5588/ADP5587)
 M:	Michael Hennerich <michael.hennerich@analog.com>
+S:	Supported
 W:	http://wiki.analog.com/ADP5588
 W:	http://ez.analog.com/community/linux-device-drivers
-S:	Supported
-F:	drivers/input/keyboard/adp5588-keys.c
 F:	drivers/gpio/gpio-adp5588.c
+F:	drivers/input/keyboard/adp5588-keys.c
 
 ADP8860 BACKLIGHT DRIVER (ADP8860/ADP8861/ADP8863)
 M:	Michael Hennerich <michael.hennerich@analog.com>
+S:	Supported
 W:	http://wiki.analog.com/ADP8860
 W:	http://ez.analog.com/community/linux-device-drivers
-S:	Supported
 F:	drivers/video/backlight/adp8860_bl.c
 
 ADT746X FAN DRIVER
@@ -540,44 +558,44 @@
 M:	Hannes Reinecke <hare@suse.com>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
-F:	Documentation/scsi/advansys.txt
+F:	Documentation/scsi/advansys.rst
 F:	drivers/scsi/advansys.c
 
 ADXL34X THREE-AXIS DIGITAL ACCELEROMETER DRIVER (ADXL345/ADXL346)
 M:	Michael Hennerich <michael.hennerich@analog.com>
+S:	Supported
 W:	http://wiki.analog.com/ADXL345
 W:	http://ez.analog.com/community/linux-device-drivers
-S:	Supported
-F:	drivers/input/misc/adxl34x.c
 F:	Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
+F:	drivers/input/misc/adxl34x.c
 
 ADXL372 THREE-AXIS DIGITAL ACCELEROMETER DRIVER
 M:	Stefan Popa <stefan.popa@analog.com>
-W:	http://ez.analog.com/community/linux-device-drivers
 S:	Supported
-F:	drivers/iio/accel/adxl372.c
-F:	drivers/iio/accel/adxl372_spi.c
-F:	drivers/iio/accel/adxl372_i2c.c
+W:	http://ez.analog.com/community/linux-device-drivers
 F:	Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
+F:	drivers/iio/accel/adxl372.c
+F:	drivers/iio/accel/adxl372_i2c.c
+F:	drivers/iio/accel/adxl372_spi.c
 
 AF9013 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
-S:	Maintained
 F:	drivers/media/dvb-frontends/af9013*
 
 AF9033 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
-S:	Maintained
 F:	drivers/media/dvb-frontends/af9033*
 
 AFFS FILE SYSTEM
@@ -591,15 +609,15 @@
 M:	David Howells <dhowells@redhat.com>
 L:	linux-afs@lists.infradead.org
 S:	Supported
+W:	https://www.infradead.org/~dhowells/kafs/
+F:	Documentation/filesystems/afs.rst
 F:	fs/afs/
 F:	include/trace/events/afs.h
-F:	Documentation/filesystems/afs.rst
-W:	https://www.infradead.org/~dhowells/kafs/
 
 AGPGART DRIVER
 M:	David Airlie <airlied@linux.ie>
-T:	git git://anongit.freedesktop.org/drm/drm
 S:	Maintained
+T:	git git://anongit.freedesktop.org/drm/drm
 F:	drivers/char/agp/
 F:	include/linux/agp*
 F:	include/uapi/linux/agp*
@@ -620,9 +638,9 @@
 AIMSLAB FM RADIO RECEIVER DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
-W:	https://linuxtv.org
 S:	Maintained
+W:	https://linuxtv.org
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/radio/radio-aimslab*
 
 AIO
@@ -635,11 +653,11 @@
 AIRSPY MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
-S:	Maintained
 F:	drivers/media/usb/airspy/
 
 ALACRITECH GIGABIT ETHERNET DRIVER
@@ -647,18 +665,11 @@
 S:	Maintained
 F:	drivers/net/ethernet/alacritech/*
 
-FORCEDETH GIGABIT ETHERNET DRIVER
-M:	Rain River <rain.1986.08.12@gmail.com>
-M:	Zhu Yanjun <zyjzyj2000@gmail.com>
-L:	netdev@vger.kernel.org
-S:	Maintained
-F:	drivers/net/ethernet/nvidia/*
-
 ALCATEL SPEEDTOUCH USB DRIVER
 M:	Duncan Sands <duncan.sands@free.fr>
 L:	linux-usb@vger.kernel.org
-W:	http://www.linux-usb.org/SpeedTouch/
 S:	Maintained
+W:	http://www.linux-usb.org/SpeedTouch/
 F:	drivers/usb/atm/speedtch.c
 F:	drivers/usb/atm/usbatm.c
 
@@ -676,11 +687,11 @@
 
 ALL SENSORS DLH SERIES PRESSURE SENSORS DRIVER
 M:	Tomislav Denis <tomislav.denis@avl.com>
-W:	http://www.allsensors.com/
-S:	Maintained
 L:	linux-iio@vger.kernel.org
-F:	drivers/iio/pressure/dlhl60d.c
+S:	Maintained
+W:	http://www.allsensors.com/
 F:	Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
+F:	drivers/iio/pressure/dlhl60d.c
 
 ALLEGRO DVT VIDEO IP CORE DRIVER
 M:	Michael Tretter <m.tretter@pengutronix.de>
@@ -689,6 +700,14 @@
 S:	Maintained
 F:	drivers/staging/media/allegro-dvt/
 
+ALLWINNER A10 CSI DRIVER
+M:	Maxime Ripard <mripard@kernel.org>
+L:	linux-media@vger.kernel.org
+S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
+F:	Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
+F:	drivers/media/platform/sunxi/sun4i-csi/
+
 ALLWINNER CPUFREQ DRIVER
 M:	Yangtao Li <tiny.windzz@gmail.com>
 L:	linux-pm@vger.kernel.org
@@ -721,12 +740,12 @@
 M:	Richard Henderson <rth@twiddle.net>
 M:	Ivan Kokshaysky <ink@jurassic.park.msu.ru>
 M:	Matt Turner <mattst88@gmail.com>
-S:	Odd Fixes
 L:	linux-alpha@vger.kernel.org
+S:	Odd Fixes
 F:	arch/alpha/
 
 ALPS PS/2 TOUCHPAD DRIVER
-R:	Pali Rohár <pali.rohar@gmail.com>
+R:	Pali Rohár <pali@kernel.org>
 F:	drivers/input/mouse/alps.*
 
 ALTERA I2C CONTROLLER DRIVER
@@ -737,7 +756,6 @@
 
 ALTERA MAILBOX DRIVER
 M:	Ley Foon Tan <ley.foon.tan@intel.com>
-L:	nios2-dev@lists.rocketboards.org (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/mailbox/mailbox-altera.c
 
@@ -759,25 +777,29 @@
 F:	drivers/gpio/gpio-altera-a10sr.c
 F:	drivers/mfd/altera-a10sr.c
 F:	drivers/reset/reset-a10sr.c
-F:	include/linux/mfd/altera-a10sr.h
 F:	include/dt-bindings/reset/altr,rst-mgr-a10sr.h
+F:	include/linux/mfd/altera-a10sr.h
 
 ALTERA TRIPLE SPEED ETHERNET DRIVER
 M:	Thor Thayer <thor.thayer@linux.intel.com>
 L:	netdev@vger.kernel.org
-L:	nios2-dev@lists.rocketboards.org (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/net/ethernet/altera/
 
 ALTERA UART/JTAG UART SERIAL DRIVERS
 M:	Tobias Klauser <tklauser@distanz.ch>
 L:	linux-serial@vger.kernel.org
-L:	nios2-dev@lists.rocketboards.org (moderated for non-subscribers)
 S:	Maintained
-F:	drivers/tty/serial/altera_uart.c
 F:	drivers/tty/serial/altera_jtaguart.c
-F:	include/linux/altera_uart.h
+F:	drivers/tty/serial/altera_uart.c
 F:	include/linux/altera_jtaguart.h
+F:	include/linux/altera_uart.h
+
+AMAZON ANNAPURNA LABS FIC DRIVER
+M:	Talel Shenhar <talel@amazon.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt
+F:	drivers/irqchip/irq-al-fic.c
 
 AMAZON ANNAPURNA LABS THERMAL MMIO DRIVER
 M:	Talel Shenhar <talel@amazon.com>
@@ -800,8 +822,8 @@
 M:	Gal Pressman <galpress@amazon.com>
 R:	Yossi Leybovich <sleybo@amazon.com>
 L:	linux-rdma@vger.kernel.org
-Q:	https://patchwork.kernel.org/project/linux-rdma/list/
 S:	Supported
+Q:	https://patchwork.kernel.org/project/linux-rdma/list/
 F:	drivers/infiniband/hw/efa/
 F:	include/uapi/rdma/efa-abi.h
 
@@ -816,8 +838,8 @@
 M:	Harry Wentland <harry.wentland@amd.com>
 M:	Leo Li <sunpeng.li@amd.com>
 L:	amd-gfx@lists.freedesktop.org
-T:	git git://people.freedesktop.org/~agd5f/linux
 S:	Supported
+T:	git git://people.freedesktop.org/~agd5f/linux
 F:	drivers/gpu/drm/amd/display/
 
 AMD FAM15H PROCESSOR POWER MONITORING DRIVER
@@ -842,32 +864,32 @@
 AMD GEODE PROCESSOR/CHIPSET SUPPORT
 M:	Andres Salomon <dilinger@queued.net>
 L:	linux-geode@lists.infradead.org (moderated for non-subscribers)
-W:	http://www.amd.com/us-en/ConnectivitySolutions/TechnicalResources/0,,50_2334_2452_11363,00.html
 S:	Supported
+W:	http://www.amd.com/us-en/ConnectivitySolutions/TechnicalResources/0,,50_2334_2452_11363,00.html
+F:	arch/x86/include/asm/geode.h
 F:	drivers/char/hw_random/geode-rng.c
 F:	drivers/crypto/geode*
 F:	drivers/video/fbdev/geode/
-F:	arch/x86/include/asm/geode.h
 
 AMD IOMMU (AMD-VI)
 M:	Joerg Roedel <joro@8bytes.org>
 L:	iommu@lists.linux-foundation.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
 F:	drivers/iommu/amd_iommu*.[ch]
 F:	include/linux/amd-iommu.h
 
 AMD KFD
 M:	Felix Kuehling <Felix.Kuehling@amd.com>
 L:	amd-gfx@lists.freedesktop.org
-T:	git git://people.freedesktop.org/~agd5f/linux
 S:	Supported
+T:	git git://people.freedesktop.org/~agd5f/linux
 F:	drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd*.[ch]
 F:	drivers/gpu/drm/amd/amdkfd/
 F:	drivers/gpu/drm/amd/include/cik_structs.h
 F:	drivers/gpu/drm/amd/include/kgd_kfd_interface.h
-F:	drivers/gpu/drm/amd/include/vi_structs.h
 F:	drivers/gpu/drm/amd/include/v9_structs.h
+F:	drivers/gpu/drm/amd/include/vi_structs.h
 F:	include/uapi/linux/kfd_ioctl.h
 
 AMD MP2 I2C DRIVER
@@ -882,8 +904,8 @@
 M:	Evan Quan <evan.quan@amd.com>
 L:	amd-gfx@lists.freedesktop.org
 S:	Supported
-F:	drivers/gpu/drm/amd/powerplay/
 T:	git git://people.freedesktop.org/~agd5f/linux
+F:	drivers/gpu/drm/amd/powerplay/
 
 AMD SEATTLE DEVICE TREE SUPPORT
 M:	Brijesh Singh <brijeshkumar.singh@amd.com>
@@ -896,82 +918,82 @@
 M:	Tom Lendacky <thomas.lendacky@amd.com>
 L:	netdev@vger.kernel.org
 S:	Supported
-F:	drivers/net/ethernet/amd/xgbe/
 F:	arch/arm64/boot/dts/amd/amd-seattle-xgbe*.dtsi
+F:	drivers/net/ethernet/amd/xgbe/
 
 ANALOG DEVICES INC AD5686 DRIVER
 M:	Stefan Popa <stefan.popa@analog.com>
 L:	linux-pm@vger.kernel.org
-W:	http://ez.analog.com/community/linux-device-drivers
 S:	Supported
+W:	http://ez.analog.com/community/linux-device-drivers
 F:	drivers/iio/dac/ad5686*
 F:	drivers/iio/dac/ad5696*
 
 ANALOG DEVICES INC AD5758 DRIVER
 M:	Stefan Popa <stefan.popa@analog.com>
 L:	linux-iio@vger.kernel.org
-W:	http://ez.analog.com/community/linux-device-drivers
 S:	Supported
-F:	drivers/iio/dac/ad5758.c
+W:	http://ez.analog.com/community/linux-device-drivers
 F:	Documentation/devicetree/bindings/iio/dac/ad5758.txt
+F:	drivers/iio/dac/ad5758.c
 
 ANALOG DEVICES INC AD7091R5 DRIVER
 M:	Beniamin Bia <beniamin.bia@analog.com>
 L:	linux-iio@vger.kernel.org
-W:	http://ez.analog.com/community/linux-device-drivers
 S:	Supported
-F:	drivers/iio/adc/ad7091r5.c
+W:	http://ez.analog.com/community/linux-device-drivers
 F:	Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml
+F:	drivers/iio/adc/ad7091r5.c
 
 ANALOG DEVICES INC AD7124 DRIVER
 M:	Stefan Popa <stefan.popa@analog.com>
 L:	linux-iio@vger.kernel.org
-W:	http://ez.analog.com/community/linux-device-drivers
 S:	Supported
-F:	drivers/iio/adc/ad7124.c
+W:	http://ez.analog.com/community/linux-device-drivers
 F:	Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
+F:	drivers/iio/adc/ad7124.c
 
 ANALOG DEVICES INC AD7192 DRIVER
 M:	Alexandru Tachici <alexandru.tachici@analog.com>
 L:	linux-iio@vger.kernel.org
-W:	http://ez.analog.com/community/linux-device-drivers
 S:	Supported
-F:	drivers/iio/adc/ad7192.c
+W:	http://ez.analog.com/community/linux-device-drivers
 F:	Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
+F:	drivers/iio/adc/ad7192.c
 
 ANALOG DEVICES INC AD7292 DRIVER
 M:	Marcelo Schmitt <marcelo.schmitt1@gmail.com>
 L:	linux-iio@vger.kernel.org
-W:	http://ez.analog.com/community/linux-device-drivers
 S:	Supported
-F:	drivers/iio/adc/ad7292.c
+W:	http://ez.analog.com/community/linux-device-drivers
 F:	Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
+F:	drivers/iio/adc/ad7292.c
 
 ANALOG DEVICES INC AD7606 DRIVER
 M:	Stefan Popa <stefan.popa@analog.com>
 M:	Beniamin Bia <beniamin.bia@analog.com>
 L:	linux-iio@vger.kernel.org
-W:	http://ez.analog.com/community/linux-device-drivers
 S:	Supported
-F:	drivers/iio/adc/ad7606.c
+W:	http://ez.analog.com/community/linux-device-drivers
 F:	Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
+F:	drivers/iio/adc/ad7606.c
 
 ANALOG DEVICES INC AD7768-1 DRIVER
 M:	Stefan Popa <stefan.popa@analog.com>
 L:	linux-iio@vger.kernel.org
-W:	http://ez.analog.com/community/linux-device-drivers
 S:	Supported
-F:	drivers/iio/adc/ad7768-1.c
+W:	http://ez.analog.com/community/linux-device-drivers
 F:	Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.txt
+F:	drivers/iio/adc/ad7768-1.c
 
 ANALOG DEVICES INC AD7780 DRIVER
 M:	Michael Hennerich <Michael.Hennerich@analog.com>
 M:	Renato Lui Geh <renatogeh@gmail.com>
 L:	linux-iio@vger.kernel.org
-W:	http://ez.analog.com/community/linux-device-drivers
 S:	Supported
-F:	drivers/iio/adc/ad7780.c
+W:	http://ez.analog.com/community/linux-device-drivers
 F:	Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
+F:	drivers/iio/adc/ad7780.c
 
 ANALOG DEVICES INC AD9389B DRIVER
 M:	Hans Verkuil <hverkuil-cisco@xs4all.nl>
@@ -982,53 +1004,53 @@
 ANALOG DEVICES INC ADGS1408 DRIVER
 M:	Mircea Caprioru <mircea.caprioru@analog.com>
 S:	Supported
-F:	drivers/mux/adgs1408.c
 F:	Documentation/devicetree/bindings/mux/adi,adgs1408.txt
+F:	drivers/mux/adgs1408.c
 
 ANALOG DEVICES INC ADIN DRIVER
 M:	Alexandru Ardelean <alexaundru.ardelean@analog.com>
 L:	netdev@vger.kernel.org
-W:	http://ez.analog.com/community/linux-device-drivers
 S:	Supported
-F:	drivers/net/phy/adin.c
+W:	http://ez.analog.com/community/linux-device-drivers
 F:	Documentation/devicetree/bindings/net/adi,adin.yaml
+F:	drivers/net/phy/adin.c
 
 ANALOG DEVICES INC ADIS DRIVER LIBRARY
 M:	Alexandru Ardelean <alexandru.ardelean@analog.com>
-S:	Supported
 L:	linux-iio@vger.kernel.org
-F:	include/linux/iio/imu/adis.h
+S:	Supported
 F:	drivers/iio/imu/adis.c
+F:	include/linux/iio/imu/adis.h
 
 ANALOG DEVICES INC ADIS16460 DRIVER
 M:	Dragos Bogdan <dragos.bogdan@analog.com>
-S:	Supported
 L:	linux-iio@vger.kernel.org
+S:	Supported
 W:	http://ez.analog.com/community/linux-device-drivers
-F:	drivers/iio/imu/adis16460.c
 F:	Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
+F:	drivers/iio/imu/adis16460.c
 
 ANALOG DEVICES INC ADM1177 DRIVER
 M:	Beniamin Bia <beniamin.bia@analog.com>
 M:	Michael Hennerich <Michael.Hennerich@analog.com>
 L:	linux-hwmon@vger.kernel.org
-W:	http://ez.analog.com/community/linux-device-drivers
 S:	Supported
-F:	drivers/hwmon/adm1177.c
+W:	http://ez.analog.com/community/linux-device-drivers
 F:	Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
+F:	drivers/hwmon/adm1177.c
 
 ANALOG DEVICES INC ADP5061 DRIVER
 M:	Stefan Popa <stefan.popa@analog.com>
 L:	linux-pm@vger.kernel.org
-W:	http://ez.analog.com/community/linux-device-drivers
 S:	Supported
+W:	http://ez.analog.com/community/linux-device-drivers
 F:	drivers/power/supply/adp5061.c
 
 ANALOG DEVICES INC ADV7180 DRIVER
 M:	Lars-Peter Clausen <lars@metafoo.de>
 L:	linux-media@vger.kernel.org
-W:	http://ez.analog.com/community/linux-device-drivers
 S:	Supported
+W:	http://ez.analog.com/community/linux-device-drivers
 F:	drivers/media/i2c/adv7180.c
 
 ANALOG DEVICES INC ADV748X DRIVER
@@ -1059,36 +1081,22 @@
 M:	Lars-Peter Clausen <lars@metafoo.de>
 M:	Nuno Sá <nuno.sa@analog.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
+S:	Supported
 W:	http://wiki.analog.com/
 W:	http://ez.analog.com/community/linux-device-drivers
-S:	Supported
-F:	sound/soc/codecs/adau*
-F:	sound/soc/codecs/adav*
 F:	sound/soc/codecs/ad1*
 F:	sound/soc/codecs/ad7*
-F:	sound/soc/codecs/ssm*
+F:	sound/soc/codecs/adau*
+F:	sound/soc/codecs/adav*
 F:	sound/soc/codecs/sigmadsp.*
+F:	sound/soc/codecs/ssm*
 
 ANALOG DEVICES INC DMA DRIVERS
 M:	Lars-Peter Clausen <lars@metafoo.de>
-W:	http://ez.analog.com/community/linux-device-drivers
 S:	Supported
+W:	http://ez.analog.com/community/linux-device-drivers
 F:	drivers/dma/dma-axi-dmac.c
 
-ANALOG DEVICES INC IIO DRIVERS
-M:	Lars-Peter Clausen <lars@metafoo.de>
-M:	Michael Hennerich <Michael.Hennerich@analog.com>
-M:	Stefan Popa <stefan.popa@analog.com>
-W:	http://wiki.analog.com/
-W:	http://ez.analog.com/community/linux-device-drivers
-S:	Supported
-F:	Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523
-F:	Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4350
-F:	drivers/iio/*/ad*
-F:	drivers/iio/adc/ltc249*
-X:	drivers/iio/*/adjd*
-F:	drivers/staging/iio/*/ad*
-
 ANALOG DEVICES INC HMC425A DRIVER
 M:	Beniamin Bia <beniamin.bia@analog.com>
 M:	Michael Hennerich <michael.hennerich@analog.com>
@@ -1098,6 +1106,20 @@
 F:	Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
 F:	drivers/iio/amplifiers/hmc425a.c
 
+ANALOG DEVICES INC IIO DRIVERS
+M:	Lars-Peter Clausen <lars@metafoo.de>
+M:	Michael Hennerich <Michael.Hennerich@analog.com>
+M:	Stefan Popa <stefan.popa@analog.com>
+S:	Supported
+W:	http://wiki.analog.com/
+W:	http://ez.analog.com/community/linux-device-drivers
+F:	Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523
+F:	Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4350
+F:	drivers/iio/*/ad*
+F:	drivers/iio/adc/ltc249*
+F:	drivers/staging/iio/*/ad*
+X:	drivers/iio/*/adjd*
+
 ANALOGBITS PLL LIBRARIES
 M:	Paul Walmsley <paul.walmsley@sifive.com>
 S:	Supported
@@ -1108,13 +1130,13 @@
 M:	Nick Hu <nickhu@andestech.com>
 M:	Greentime Hu <green.hu@gmail.com>
 M:	Vincent Chen <deanbo422@gmail.com>
-T:	git https://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux.git
 S:	Supported
-F:	arch/nds32/
+T:	git https://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux.git
 F:	Documentation/devicetree/bindings/interrupt-controller/andestech,ativic32.txt
 F:	Documentation/devicetree/bindings/nds32/
-K:	nds32
+F:	arch/nds32/
 N:	nds32
+K:	nds32
 
 ANDROID CONFIG FRAGMENTS
 M:	Rob Herring <robh@kernel.org>
@@ -1128,9 +1150,9 @@
 M:	Martijn Coenen <maco@android.com>
 M:	Joel Fernandes <joel@joelfernandes.org>
 M:	Christian Brauner <christian@brauner.io>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git
 L:	devel@driverdev.osuosl.org
 S:	Supported
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git
 F:	drivers/android/
 F:	drivers/staging/android/
 
@@ -1174,18 +1196,18 @@
 S:	Odd fixes
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/apm.git
 F:	arch/x86/kernel/apm_32.c
+F:	drivers/char/apm-emulation.c
 F:	include/linux/apm_bios.h
 F:	include/uapi/linux/apm_bios.h
-F:	drivers/char/apm-emulation.c
 
 APPARMOR SECURITY MODULE
 M:	John Johansen <john.johansen@canonical.com>
 L:	apparmor@lists.ubuntu.com (subscribers-only, general discussion)
+S:	Supported
 W:	wiki.apparmor.net
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor
-S:	Supported
-F:	security/apparmor/
 F:	Documentation/admin-guide/LSM/apparmor.rst
+F:	security/apparmor/
 
 APPLE BCM5974 MULTITOUCH DRIVER
 M:	Henrik Rydberg <rydberg@bitmath.org>
@@ -1203,9 +1225,9 @@
 L:	netdev@vger.kernel.org
 S:	Odd fixes
 F:	drivers/net/appletalk/
-F:	net/appletalk/
 F:	include/linux/atalk.h
 F:	include/uapi/linux/atalk.h
+F:	net/appletalk/
 
 APPLIED MICRO (APM) X-GENE DEVICE TREE SUPPORT
 M:	Khuong Dinh <khuong@os.amperecomputing.com>
@@ -1215,8 +1237,8 @@
 APPLIED MICRO (APM) X-GENE SOC EDAC
 M:	Khuong Dinh <khuong@os.amperecomputing.com>
 S:	Supported
-F:	drivers/edac/xgene_edac.c
 F:	Documentation/devicetree/bindings/edac/apm-xgene-edac.txt
+F:	drivers/edac/xgene_edac.c
 
 APPLIED MICRO (APM) X-GENE SOC ETHERNET (V2) DRIVER
 M:	Iyappan Subramanian <iyappan@os.amperecomputing.com>
@@ -1229,17 +1251,17 @@
 M:	Keyur Chudgar <keyur@os.amperecomputing.com>
 M:	Quan Nguyen <quan@os.amperecomputing.com>
 S:	Supported
-F:	drivers/net/ethernet/apm/xgene/
-F:	drivers/net/phy/mdio-xgene.c
 F:	Documentation/devicetree/bindings/net/apm-xgene-enet.txt
 F:	Documentation/devicetree/bindings/net/apm-xgene-mdio.txt
+F:	drivers/net/ethernet/apm/xgene/
+F:	drivers/net/phy/mdio-xgene.c
 
 APPLIED MICRO (APM) X-GENE SOC PMU
 M:	Khuong Dinh <khuong@os.amperecomputing.com>
 S:	Supported
-F:	drivers/perf/xgene_pmu.c
 F:	Documentation/admin-guide/perf/xgene-pmu.rst
 F:	Documentation/devicetree/bindings/perf/apm-xgene-pmu.txt
+F:	drivers/perf/xgene_pmu.c
 
 APTINA CAMERA SENSOR PLL
 M:	Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
@@ -1253,8 +1275,8 @@
 S:	Supported
 W:	https://www.marvell.com/
 Q:	http://patchwork.ozlabs.org/project/netdev/list/
-F:	drivers/net/ethernet/aquantia/atlantic/
 F:	Documentation/networking/device_drivers/aquantia/atlantic.txt
+F:	drivers/net/ethernet/aquantia/atlantic/
 
 AQUANTIA ETHERNET DRIVER PTP SUBSYSTEM
 M:	Egor Pomozov <epomozov@marvell.com>
@@ -1272,8 +1294,8 @@
 ARC PGU DRM DRIVER
 M:	Alexey Brodkin <abrodkin@synopsys.com>
 S:	Supported
-F:	drivers/gpu/drm/arc/
 F:	Documentation/devicetree/bindings/display/snps,arcpgu.txt
+F:	drivers/gpu/drm/arc/
 
 ARCNET NETWORK LAYER
 M:	Michael Grzeschik <m.grzeschik@pengutronix.de>
@@ -1291,23 +1313,32 @@
 F:	arch/arm64/include/asm/arch_timer.h
 F:	drivers/clocksource/arm_arch_timer.c
 
+ARM HDLCD DRM DRIVER
+M:	Liviu Dudau <liviu.dudau@arm.com>
+S:	Supported
+F:	Documentation/devicetree/bindings/display/arm,hdlcd.txt
+F:	drivers/gpu/drm/arm/hdlcd_*
+
 ARM INTEGRATOR, VERSATILE AND REALVIEW SUPPORT
 M:	Linus Walleij <linus.walleij@linaro.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-F:	Documentation/devicetree/bindings/arm/arm-boards
+F:	Documentation/devicetree/bindings/arm/arm,integrator.yaml
+F:	Documentation/devicetree/bindings/arm/arm,realview.yaml
+F:	Documentation/devicetree/bindings/arm/arm,versatile.yaml
+F:	Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
 F:	Documentation/devicetree/bindings/auxdisplay/arm-charlcd.txt
-F:	Documentation/devicetree/bindings/clock/arm-integrator.txt
+F:	Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml
 F:	Documentation/devicetree/bindings/i2c/i2c-versatile.txt
 F:	Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt
 F:	Documentation/devicetree/bindings/mtd/arm-versatile.txt
+F:	arch/arm/boot/dts/arm-realview-*
+F:	arch/arm/boot/dts/integrator*
+F:	arch/arm/boot/dts/versatile*
 F:	arch/arm/mach-integrator/
 F:	arch/arm/mach-realview/
 F:	arch/arm/mach-versatile/
 F:	arch/arm/plat-versatile/
-F:	arch/arm/boot/dts/arm-realview-*
-F:	arch/arm/boot/dts/integrator*
-F:	arch/arm/boot/dts/versatile*
 F:	drivers/clk/versatile/
 F:	drivers/i2c/busses/i2c-versatile.c
 F:	drivers/irqchip/irq-versatile-fpga.c
@@ -1315,12 +1346,6 @@
 F:	drivers/power/reset/arm-versatile-reboot.c
 F:	drivers/soc/versatile/
 
-ARM HDLCD DRM DRIVER
-M:	Liviu Dudau <liviu.dudau@arm.com>
-S:	Supported
-F:	drivers/gpu/drm/arm/hdlcd_*
-F:	Documentation/devicetree/bindings/display/arm,hdlcd.txt
-
 ARM KOMEDA DRM-KMS DRIVER
 M:	James (Qian) Wang <james.qian.wang@arm.com>
 M:	Liviu Dudau <liviu.dudau@arm.com>
@@ -1328,20 +1353,10 @@
 L:	Mali DP Maintainers <malidp@foss.arm.com>
 S:	Supported
 T:	git git://anongit.freedesktop.org/drm/drm-misc
-F:	drivers/gpu/drm/arm/display/include/
-F:	drivers/gpu/drm/arm/display/komeda/
 F:	Documentation/devicetree/bindings/display/arm,komeda.txt
 F:	Documentation/gpu/komeda-kms.rst
-
-ARM MALI-DP DRM DRIVER
-M:	Liviu Dudau <liviu.dudau@arm.com>
-M:	Brian Starkey <brian.starkey@arm.com>
-L:	Mali DP Maintainers <malidp@foss.arm.com>
-S:	Supported
-T:	git git://anongit.freedesktop.org/drm/drm-misc
-F:	drivers/gpu/drm/arm/
-F:	Documentation/devicetree/bindings/display/arm,malidp.txt
-F:	Documentation/gpu/afbc.rst
+F:	drivers/gpu/drm/arm/display/include/
+F:	drivers/gpu/drm/arm/display/komeda/
 
 ARM MALI PANFROST DRM DRIVER
 M:	Rob Herring <robh@kernel.org>
@@ -1354,32 +1369,42 @@
 F:	drivers/gpu/drm/panfrost/
 F:	include/uapi/drm/panfrost_drm.h
 
+ARM MALI-DP DRM DRIVER
+M:	Liviu Dudau <liviu.dudau@arm.com>
+M:	Brian Starkey <brian.starkey@arm.com>
+L:	Mali DP Maintainers <malidp@foss.arm.com>
+S:	Supported
+T:	git git://anongit.freedesktop.org/drm/drm-misc
+F:	Documentation/devicetree/bindings/display/arm,malidp.txt
+F:	Documentation/gpu/afbc.rst
+F:	drivers/gpu/drm/arm/
+
 ARM MFM AND FLOPPY DRIVERS
 M:	Ian Molton <spyro@f2s.com>
 S:	Maintained
-F:	arch/arm/mach-rpc/floppydma.S
 F:	arch/arm/include/asm/floppy.h
+F:	arch/arm/mach-rpc/floppydma.S
 
 ARM PMU PROFILING AND DEBUGGING
 M:	Will Deacon <will@kernel.org>
 M:	Mark Rutland <mark.rutland@arm.com>
-S:	Maintained
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-F:	arch/arm*/kernel/perf_*
-F:	arch/arm/oprofile/common.c
-F:	arch/arm*/kernel/hw_breakpoint.c
-F:	arch/arm*/include/asm/hw_breakpoint.h
-F:	arch/arm*/include/asm/perf_event.h
-F:	drivers/perf/*
-F:	include/linux/perf/arm_pmu.h
+S:	Maintained
 F:	Documentation/devicetree/bindings/arm/pmu.yaml
 F:	Documentation/devicetree/bindings/perf/
+F:	arch/arm*/include/asm/hw_breakpoint.h
+F:	arch/arm*/include/asm/perf_event.h
+F:	arch/arm*/kernel/hw_breakpoint.c
+F:	arch/arm*/kernel/perf_*
+F:	arch/arm/oprofile/common.c
+F:	drivers/perf/*
+F:	include/linux/perf/arm_pmu.h
 
 ARM PORT
 M:	Russell King <linux@armlinux.org.uk>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W:	http://www.armlinux.org.uk/
 S:	Odd Fixes
+W:	http://www.armlinux.org.uk/
 T:	git git://git.armlinux.org.uk/~rmk/linux-arm.git
 F:	arch/arm/
 X:	arch/arm/boot/dts/
@@ -1432,36 +1457,38 @@
 F:	Documentation/devicetree/bindings/interrupt-controller/arm,vic.txt
 F:	drivers/irqchip/irq-vic.c
 
-AMAZON ANNAPURNA LABS FIC DRIVER
-M:	Talel Shenhar <talel@amazon.com>
-S:	Maintained
-F:	Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt
-F:	drivers/irqchip/irq-al-fic.c
-
 ARM SMMU DRIVERS
 M:	Will Deacon <will@kernel.org>
 R:	Robin Murphy <robin.murphy@arm.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
+F:	Documentation/devicetree/bindings/iommu/arm,smmu*
 F:	drivers/iommu/arm-smmu*
-F:	drivers/iommu/io-pgtable-arm.c
 F:	drivers/iommu/io-pgtable-arm-v7s.c
+F:	drivers/iommu/io-pgtable-arm.c
 
 ARM SUB-ARCHITECTURES
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git
 F:	arch/arm/mach-*/
 F:	arch/arm/plat-*/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git
 
 ARM/ACTIONS SEMI ARCHITECTURE
 M:	Andreas Färber <afaerber@suse.de>
 M:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-N:	owl
-F:	arch/arm/mach-actions/
+F:	Documentation/devicetree/bindings/arm/actions.yaml
+F:	Documentation/devicetree/bindings/clock/actions,owl-cmu.txt
+F:	Documentation/devicetree/bindings/dma/owl-dma.txt
+F:	Documentation/devicetree/bindings/i2c/i2c-owl.txt
+F:	Documentation/devicetree/bindings/mmc/owl-mmc.yaml
+F:	Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.txt
+F:	Documentation/devicetree/bindings/power/actions,owl-sps.txt
+F:	Documentation/devicetree/bindings/timer/actions,owl-timer.txt
 F:	arch/arm/boot/dts/owl-*
+F:	arch/arm/mach-actions/
 F:	arch/arm64/boot/dts/actions/
 F:	drivers/clk/actions/
 F:	drivers/clocksource/timer-owl*
@@ -1472,14 +1499,7 @@
 F:	drivers/soc/actions/
 F:	include/dt-bindings/power/owl-*
 F:	include/linux/soc/actions/
-F:	Documentation/devicetree/bindings/arm/actions.yaml
-F:	Documentation/devicetree/bindings/clock/actions,owl-cmu.txt
-F:	Documentation/devicetree/bindings/dma/owl-dma.txt
-F:	Documentation/devicetree/bindings/i2c/i2c-owl.txt
-F:	Documentation/devicetree/bindings/mmc/owl-mmc.yaml
-F:	Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.txt
-F:	Documentation/devicetree/bindings/power/actions,owl-sps.txt
-F:	Documentation/devicetree/bindings/timer/actions,owl-timer.txt
+N:	owl
 
 ARM/ADS SPHERE MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>
@@ -1506,85 +1526,77 @@
 M:	Chen-Yu Tsai <wens@csie.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-N:	sun[x456789]i
-N:	sun50i
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git
 F:	arch/arm/mach-sunxi/
 F:	arch/arm64/boot/dts/allwinner/
 F:	drivers/clk/sunxi-ng/
 F:	drivers/pinctrl/sunxi/
 F:	drivers/soc/sunxi/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git
-
-Allwinner A10 CSI driver
-M:	Maxime Ripard <mripard@kernel.org>
-L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
-F:	drivers/media/platform/sunxi/sun4i-csi/
-F:	Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
-S:	Maintained
+N:	sun[x456789]i
+N:	sun50i
 
 ARM/Amlogic Meson SoC CLOCK FRAMEWORK
 M:	Neil Armstrong <narmstrong@baylibre.com>
 M:	Jerome Brunet <jbrunet@baylibre.com>
 L:	linux-amlogic@lists.infradead.org
 S:	Maintained
-F:	drivers/clk/meson/
-F:	include/dt-bindings/clock/meson*
-F:	include/dt-bindings/clock/gxbb*
 F:	Documentation/devicetree/bindings/clock/amlogic*
-
-ARM/Amlogic Meson SoC support
-M:	Kevin Hilman <khilman@baylibre.com>
-L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-L:	linux-amlogic@lists.infradead.org
-W:	http://linux-meson.com/
-S:	Maintained
-F:	arch/arm/mach-meson/
-F:	arch/arm/boot/dts/meson*
-F:	arch/arm64/boot/dts/amlogic/
-F:	drivers/pinctrl/meson/
-F:	drivers/mmc/host/meson*
-F:	drivers/soc/amlogic/
-F:	drivers/rtc/rtc-meson*
-N:	meson
+F:	drivers/clk/meson/
+F:	include/dt-bindings/clock/gxbb*
+F:	include/dt-bindings/clock/meson*
 
 ARM/Amlogic Meson SoC Crypto Drivers
 M:	Corentin Labbe <clabbe@baylibre.com>
 L:	linux-crypto@vger.kernel.org
 L:	linux-amlogic@lists.infradead.org
 S:	Maintained
-F:	drivers/crypto/amlogic/
 F:	Documentation/devicetree/bindings/crypto/amlogic*
+F:	drivers/crypto/amlogic/
 
 ARM/Amlogic Meson SoC Sound Drivers
 M:	Jerome Brunet <jbrunet@baylibre.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 S:	Maintained
-F:	sound/soc/meson/
 F:	Documentation/devicetree/bindings/sound/amlogic*
+F:	sound/soc/meson/
+
+ARM/Amlogic Meson SoC support
+M:	Kevin Hilman <khilman@baylibre.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L:	linux-amlogic@lists.infradead.org
+S:	Maintained
+W:	http://linux-meson.com/
+F:	arch/arm/boot/dts/meson*
+F:	arch/arm/mach-meson/
+F:	arch/arm64/boot/dts/amlogic/
+F:	drivers/mmc/host/meson*
+F:	drivers/pinctrl/meson/
+F:	drivers/rtc/rtc-meson*
+F:	drivers/soc/amlogic/
+N:	meson
 
 ARM/Annapurna Labs ALPINE ARCHITECTURE
 M:	Tsahee Zidenberg <tsahee@annapurnalabs.com>
 M:	Antoine Tenart <antoine.tenart@bootlin.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-F:	arch/arm/mach-alpine/
 F:	arch/arm/boot/dts/alpine*
+F:	arch/arm/mach-alpine/
 F:	arch/arm64/boot/dts/al/
 F:	drivers/*/*alpine*
 
 ARM/ARTPEC MACHINE SUPPORT
 M:	Jesper Nilsson <jesper.nilsson@axis.com>
 M:	Lars Persson <lars.persson@axis.com>
-S:	Maintained
 L:	linux-arm-kernel@axis.com
-F:	arch/arm/mach-artpec
+S:	Maintained
+F:	Documentation/devicetree/bindings/pinctrl/axis,artpec6-pinctrl.txt
 F:	arch/arm/boot/dts/artpec6*
+F:	arch/arm/mach-artpec
 F:	drivers/clk/axis
 F:	drivers/crypto/axis
 F:	drivers/mmc/host/usdhi6rol0.c
 F:	drivers/pinctrl/pinctrl-artpec*
-F:	Documentation/devicetree/bindings/pinctrl/axis,artpec6-pinctrl.txt
 
 ARM/ASPEED I2C DRIVER
 M:	Brendan Higgins <brendanhiggins@google.com>
@@ -1593,41 +1605,41 @@
 L:	linux-i2c@vger.kernel.org
 L:	openbmc@lists.ozlabs.org (moderated for non-subscribers)
 S:	Maintained
-F:	drivers/irqchip/irq-aspeed-i2c-ic.c
-F:	drivers/i2c/busses/i2c-aspeed.c
-F:	Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-i2c-ic.txt
 F:	Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
+F:	Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-i2c-ic.txt
+F:	drivers/i2c/busses/i2c-aspeed.c
+F:	drivers/irqchip/irq-aspeed-i2c-ic.c
 
 ARM/ASPEED MACHINE SUPPORT
 M:	Joel Stanley <joel@jms.id.au>
 R:	Andrew Jeffery <andrew@aj.id.au>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-aspeed@lists.ozlabs.org (moderated for non-subscribers)
-Q:	https://patchwork.ozlabs.org/project/linux-aspeed/list/
 S:	Supported
+Q:	https://patchwork.ozlabs.org/project/linux-aspeed/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed.git
-F:	arch/arm/mach-aspeed/
 F:	arch/arm/boot/dts/aspeed-*
+F:	arch/arm/mach-aspeed/
 N:	aspeed
 
 ARM/BITMAIN ARCHITECTURE
 M:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-F:	arch/arm64/boot/dts/bitmain/
-F:	drivers/clk/clk-bm1880.c
-F:	drivers/pinctrl/pinctrl-bm1880.c
 F:	Documentation/devicetree/bindings/arm/bitmain.yaml
 F:	Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml
 F:	Documentation/devicetree/bindings/pinctrl/bitmain,bm1880-pinctrl.txt
+F:	arch/arm64/boot/dts/bitmain/
+F:	drivers/clk/clk-bm1880.c
+F:	drivers/pinctrl/pinctrl-bm1880.c
 
 ARM/CALXEDA HIGHBANK ARCHITECTURE
-M:	Rob Herring <robh@kernel.org>
+M:	Andre Przywara <andre.przywara@arm.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-F:	arch/arm/mach-highbank/
-F:	arch/arm/boot/dts/highbank.dts
 F:	arch/arm/boot/dts/ecx-*.dts*
+F:	arch/arm/boot/dts/highbank.dts
+F:	arch/arm/mach-highbank/
 
 ARM/CAVIUM NETWORKS CNS3XXX MACHINE SUPPORT
 M:	Krzysztof Halasa <khalasa@piap.pl>
@@ -1693,19 +1705,22 @@
 ARM/CORESIGHT FRAMEWORK AND DRIVERS
 M:	Mathieu Poirier <mathieu.poirier@linaro.org>
 R:	Suzuki K Poulose <suzuki.poulose@arm.com>
+R:	Mike Leach <mike.leach@linaro.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-F:	drivers/hwtracing/coresight/*
-F:	Documentation/trace/coresight/*
-F:	Documentation/devicetree/bindings/arm/coresight.txt
-F:	Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt
 F:	Documentation/ABI/testing/sysfs-bus-coresight-devices-*
-F:	tools/perf/arch/arm/util/pmu.c
+F:	Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt
+F:	Documentation/devicetree/bindings/arm/coresight-cti.yaml
+F:	Documentation/devicetree/bindings/arm/coresight.txt
+F:	Documentation/trace/coresight/*
+F:	drivers/hwtracing/coresight/*
+F:	include/dt-bindings/arm/coresight-cti-dt.h
 F:	tools/perf/arch/arm/util/auxtrace.c
 F:	tools/perf/arch/arm/util/cs-etm.c
 F:	tools/perf/arch/arm/util/cs-etm.h
-F:	tools/perf/util/cs-etm.*
+F:	tools/perf/arch/arm/util/pmu.c
 F:	tools/perf/util/cs-etm-decoder/*
+F:	tools/perf/util/cs-etm.*
 
 ARM/CORGI MACHINE SUPPORT
 M:	Richard Purdie <rpurdie@rpsys.net>
@@ -1715,11 +1730,11 @@
 M:	Hans Ulli Kroll <ulli.kroll@googlemail.com>
 M:	Linus Walleij <linus.walleij@linaro.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-T:	git git://github.com/ulli-kroll/linux.git
 S:	Maintained
+T:	git git://github.com/ulli-kroll/linux.git
 F:	Documentation/devicetree/bindings/arm/gemini.txt
-F:	Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt
 F:	Documentation/devicetree/bindings/net/cortina,gemini-ethernet.txt
+F:	Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt
 F:	Documentation/devicetree/bindings/rtc/faraday,ftrtc010.txt
 F:	arch/arm/mach-gemini/
 F:	drivers/net/ethernet/cortina/
@@ -1729,36 +1744,36 @@
 ARM/CSR SIRFPRIMA2 MACHINE SUPPORT
 M:	Barry Song <baohua@kernel.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux.git
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux.git
 F:	arch/arm/boot/dts/prima2*
 F:	arch/arm/mach-prima2/
 F:	drivers/clk/sirf/
-F:	drivers/clocksource/timer-prima2.c
 F:	drivers/clocksource/timer-atlas7.c
-N:	[^a-z]sirf
+F:	drivers/clocksource/timer-prima2.c
 X:	drivers/gnss
+N:	[^a-z]sirf
 
 ARM/CZ.NIC TURRIS MOX SUPPORT
 M:	Marek Behun <marek.behun@nic.cz>
-W:	http://mox.turris.cz
 S:	Maintained
+W:	http://mox.turris.cz
 F:	Documentation/ABI/testing/debugfs-moxtet
 F:	Documentation/ABI/testing/sysfs-bus-moxtet-devices
 F:	Documentation/ABI/testing/sysfs-firmware-turris-mox-rwtm
 F:	Documentation/devicetree/bindings/bus/moxtet.txt
 F:	Documentation/devicetree/bindings/firmware/cznic,turris-mox-rwtm.txt
 F:	Documentation/devicetree/bindings/gpio/gpio-moxtet.txt
-F:	include/linux/moxtet.h
 F:	drivers/bus/moxtet.c
 F:	drivers/firmware/turris-mox-rwtm.c
 F:	drivers/gpio/gpio-moxtet.c
+F:	include/linux/moxtet.h
 
 ARM/EBSA110 MACHINE SUPPORT
 M:	Russell King <linux@armlinux.org.uk>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W:	http://www.armlinux.org.uk/
 S:	Maintained
+W:	http://www.armlinux.org.uk/
 F:	arch/arm/mach-ebsa110/
 F:	drivers/net/ethernet/amd/am79c961a.*
 
@@ -1785,8 +1800,8 @@
 ARM/FOOTBRIDGE ARCHITECTURE
 M:	Russell King <linux@armlinux.org.uk>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W:	http://www.armlinux.org.uk/
 S:	Maintained
+W:	http://www.armlinux.org.uk/
 F:	arch/arm/include/asm/hardware/dec21285.h
 F:	arch/arm/mach-footbridge/
 
@@ -1799,20 +1814,9 @@
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git
+X:	drivers/media/i2c/
 N:	imx
 N:	mxs
-X:	drivers/media/i2c/
-
-ARM/FREESCALE VYBRID ARM ARCHITECTURE
-M:	Shawn Guo <shawnguo@kernel.org>
-M:	Sascha Hauer <s.hauer@pengutronix.de>
-R:	Pengutronix Kernel Team <kernel@pengutronix.de>
-R:	Stefan Agner <stefan@agner.ch>
-L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Maintained
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git
-F:	arch/arm/mach-imx/*vf610*
-F:	arch/arm/boot/dts/vf*
 
 ARM/FREESCALE LAYERSCAPE ARM ARCHITECTURE
 M:	Shawn Guo <shawnguo@kernel.org>
@@ -1824,6 +1828,17 @@
 F:	arch/arm64/boot/dts/freescale/fsl-*
 F:	arch/arm64/boot/dts/freescale/qoriq-*
 
+ARM/FREESCALE VYBRID ARM ARCHITECTURE
+M:	Shawn Guo <shawnguo@kernel.org>
+M:	Sascha Hauer <s.hauer@pengutronix.de>
+R:	Pengutronix Kernel Team <kernel@pengutronix.de>
+R:	Stefan Agner <stefan@agner.ch>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git
+F:	arch/arm/boot/dts/vf*
+F:	arch/arm/mach-imx/*vf610*
+
 ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1846,22 +1861,22 @@
 ARM/HISILICON SOC SUPPORT
 M:	Wei Xu <xuwei5@hisilicon.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W:	http://www.hisilicon.com
 S:	Supported
+W:	http://www.hisilicon.com
 T:	git git://github.com/hisilicon/linux-hisi.git
-F:	arch/arm/mach-hisi/
 F:	arch/arm/boot/dts/hi3*
 F:	arch/arm/boot/dts/hip*
 F:	arch/arm/boot/dts/hisi*
+F:	arch/arm/mach-hisi/
 F:	arch/arm64/boot/dts/hisilicon/
 
 ARM/HP JORNADA 7XX MACHINE SUPPORT
 M:	Kristoffer Ericson <kristoffer.ericson@gmail.com>
-W:	www.jlime.com
 S:	Maintained
+W:	www.jlime.com
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kristoffer/linux-hpc.git
-F:	arch/arm/mach-sa1100/jornada720.c
 F:	arch/arm/mach-sa1100/include/mach/jornada720.h
+F:	arch/arm/mach-sa1100/jornada720.c
 
 ARM/IGEP MACHINE SUPPORT
 M:	Enric Balletbo i Serra <eballetbo@gmail.com>
@@ -1945,7 +1960,7 @@
 F:	arch/arm/boot/dts/lpc43*
 F:	drivers/i2c/busses/i2c-lpc2k.c
 F:	drivers/memory/pl172.c
-F:	drivers/mtd/spi-nor/nxp-spifi.c
+F:	drivers/mtd/spi-nor/controllers/nxp-spifi.c
 F:	drivers/rtc/rtc-lpc24xx.c
 N:	lpc18xx
 
@@ -1953,8 +1968,8 @@
 M:	Vladimir Zapolskiy <vz@mleia.com>
 M:	Sylvain Lemieux <slemieux.tyco@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-T:	git git://github.com/vzapolskiy/linux-lpc32xx.git
 S:	Maintained
+T:	git git://github.com/vzapolskiy/linux-lpc32xx.git
 F:	Documentation/devicetree/bindings/i2c/i2c-pnx.txt
 F:	arch/arm/boot/dts/lpc32*
 F:	arch/arm/mach-lpc32xx/
@@ -1975,14 +1990,14 @@
 M:	Gregory Clement <gregory.clement@bootlin.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
+T:	git git://git.infradead.org/linux-mvebu.git
 F:	Documentation/devicetree/bindings/soc/dove/
+F:	arch/arm/boot/dts/dove*
+F:	arch/arm/boot/dts/orion5x*
 F:	arch/arm/mach-dove/
 F:	arch/arm/mach-mv78xx0/
 F:	arch/arm/mach-orion5x/
 F:	arch/arm/plat-orion/
-F:	arch/arm/boot/dts/dove*
-F:	arch/arm/boot/dts/orion5x*
-T:	git git://git.infradead.org/linux-mvebu.git
 
 ARM/Marvell Kirkwood and Armada 370, 375, 38x, 39x, XP, 3700, 7K/8K, CN9130 SOC support
 M:	Jason Cooper <jason@lakedaemon.net>
@@ -1991,6 +2006,7 @@
 M:	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
+T:	git git://git.infradead.org/linux-mvebu.git
 F:	arch/arm/boot/dts/armada*
 F:	arch/arm/boot/dts/kirkwood*
 F:	arch/arm/configs/mvebu_*_defconfig
@@ -2004,7 +2020,6 @@
 F:	drivers/irqchip/irq-mvebu-*
 F:	drivers/pinctrl/mvebu/
 F:	drivers/rtc/rtc-armada38x.c
-T:	git git://git.infradead.org/linux-mvebu.git
 
 ARM/Mediatek RTC DRIVER
 M:	Eddie Huang <eddie.huang@mediatek.com>
@@ -2012,7 +2027,9 @@
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-mediatek@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
+F:	Documentation/devicetree/bindings/rtc/rtc-mt2712.txt
 F:	Documentation/devicetree/bindings/rtc/rtc-mt7622.txt
+F:	drivers/rtc/rtc-mt2712.c
 F:	drivers/rtc/rtc-mt6397.c
 F:	drivers/rtc/rtc-mt7622.c
 
@@ -2020,9 +2037,9 @@
 M:	Matthias Brugger <matthias.bgg@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-mediatek@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
 W:	https://mtk.bcnfs.org/
 C:	irc://chat.freenode.net/linux-mediatek
-S:	Maintained
 F:	arch/arm/boot/dts/mt6*
 F:	arch/arm/boot/dts/mt7*
 F:	arch/arm/boot/dts/mt8*
@@ -2038,36 +2055,36 @@
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-mediatek@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-F:	drivers/phy/mediatek/
 F:	Documentation/devicetree/bindings/phy/phy-mtk-*
+F:	drivers/phy/mediatek/
 
 ARM/Microchip (AT91) SoC support
 M:	Nicolas Ferre <nicolas.ferre@microchip.com>
 M:	Alexandre Belloni <alexandre.belloni@bootlin.com>
 M:	Ludovic Desroches <ludovic.desroches@microchip.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Supported
 W:	http://www.linux4sam.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux.git
-S:	Supported
-N:	at91
-N:	atmel
-F:	arch/arm/mach-at91/
-F:	include/soc/at91/
 F:	arch/arm/boot/dts/at91*.dts
 F:	arch/arm/boot/dts/at91*.dtsi
 F:	arch/arm/boot/dts/sama*.dts
 F:	arch/arm/boot/dts/sama*.dtsi
 F:	arch/arm/include/debug/at91.S
+F:	arch/arm/mach-at91/
 F:	drivers/memory/atmel*
 F:	drivers/watchdog/sama5d4_wdt.c
+F:	include/soc/at91/
 X:	drivers/input/touchscreen/atmel_mxt_ts.c
 X:	drivers/net/wireless/atmel/
+N:	at91
+N:	atmel
 
 ARM/MIOA701 MACHINE SUPPORT
 M:	Robert Jarzmik <robert.jarzmik@free.fr>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-F:	arch/arm/mach-pxa/mioa701.c
 S:	Maintained
+F:	arch/arm/mach-pxa/mioa701.c
 
 ARM/NEC MOBILEPRO 900/c MACHINE SUPPORT
 M:	Michael Petchkovsky <mkpetch@internode.on.net>
@@ -2077,13 +2094,16 @@
 M:	Linus Walleij <linus.walleij@linaro.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik.git
+F:	Documentation/devicetree/bindings/arm/ste-*
+F:	Documentation/devicetree/bindings/arm/ux500.yaml
+F:	Documentation/devicetree/bindings/arm/ux500/
 F:	Documentation/devicetree/bindings/i2c/i2c-nomadik.txt
 F:	Documentation/devicetree/bindings/i2c/i2c-stu300.txt
+F:	arch/arm/boot/dts/ste-*
 F:	arch/arm/mach-nomadik/
 F:	arch/arm/mach-u300/
 F:	arch/arm/mach-ux500/
-F:	drivers/soc/ux500/
-F:	arch/arm/boot/dts/ste-*
 F:	drivers/clk/clk-nomadik.c
 F:	drivers/clk/clk-u300.c
 F:	drivers/clocksource/clksrc-dbx500-prcmu.c
@@ -2097,8 +2117,8 @@
 F:	drivers/mfd/ab3100*
 F:	drivers/mfd/ab8500*
 F:	drivers/mfd/abx500*
-F:	drivers/mfd/dbx500*
 F:	drivers/mfd/db8500*
+F:	drivers/mfd/dbx500*
 F:	drivers/pinctrl/nomadik/
 F:	drivers/pinctrl/pinctrl-coh901*
 F:	drivers/pinctrl/pinctrl-u300.c
@@ -2106,11 +2126,8 @@
 F:	drivers/rtc/rtc-ab8500.c
 F:	drivers/rtc/rtc-coh901331.c
 F:	drivers/rtc/rtc-pl031.c
+F:	drivers/soc/ux500/
 F:	drivers/watchdog/coh901327_wdt.c
-F:	Documentation/devicetree/bindings/arm/ste-*
-F:	Documentation/devicetree/bindings/arm/ux500/
-F:	Documentation/devicetree/bindings/arm/ux500.yaml
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik.git
 
 ARM/NUVOTON NPCM ARCHITECTURE
 M:	Avi Fishman <avifishman70@gmail.com>
@@ -2121,25 +2138,25 @@
 R:	Benjamin Fair <benjaminfair@google.com>
 L:	openbmc@lists.ozlabs.org (moderated for non-subscribers)
 S:	Supported
-F:	arch/arm/mach-npcm/
-F:	arch/arm/boot/dts/nuvoton-npcm*
-F:	include/dt-bindings/clock/nuvoton,npcm7xx-clock.h
-F:	drivers/*/*npcm*
-F:	Documentation/devicetree/bindings/*/*npcm*
 F:	Documentation/devicetree/bindings/*/*/*npcm*
+F:	Documentation/devicetree/bindings/*/*npcm*
+F:	arch/arm/boot/dts/nuvoton-npcm*
+F:	arch/arm/mach-npcm/
+F:	drivers/*/*npcm*
+F:	include/dt-bindings/clock/nuvoton,npcm7xx-clock.h
 
 ARM/OPENMOKO NEO FREERUNNER (GTA02) MACHINE SUPPORT
 L:	openmoko-kernel@lists.openmoko.org (subscribers-only)
-W:	http://wiki.openmoko.org/wiki/Neo_FreeRunner
 S:	Orphan
-F:	arch/arm/mach-s3c24xx/mach-gta02.c
+W:	http://wiki.openmoko.org/wiki/Neo_FreeRunner
 F:	arch/arm/mach-s3c24xx/gta02.h
+F:	arch/arm/mach-s3c24xx/mach-gta02.c
 
 ARM/Orion SoC/Technologic Systems TS-78xx platform support
 M:	Alexander Clouter <alex@digriz.org.uk>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W:	http://www.digriz.org.uk/ts78xx/kernel
 S:	Maintained
+W:	http://www.digriz.org.uk/ts78xx/kernel
 F:	arch/arm/mach-orion5x/ts78xx-*
 
 ARM/OXNAS platform support
@@ -2147,71 +2164,72 @@
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-oxnas@groups.io (moderated for non-subscribers)
 S:	Maintained
-F:	arch/arm/mach-oxnas/
 F:	arch/arm/boot/dts/ox8*.dts*
+F:	arch/arm/mach-oxnas/
 N:	oxnas
 
 ARM/PALM TREO SUPPORT
 M:	Tomas Cech <sleep_walker@suse.com>
 L:	linux-arm-kernel@lists.infradead.org
-W:	http://hackndev.com
 S:	Maintained
+W:	http://hackndev.com
 F:	arch/arm/mach-pxa/palmtreo.*
 
 ARM/PALMTX,PALMT5,PALMLD,PALMTE2,PALMTC SUPPORT
 M:	Marek Vasut <marek.vasut@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org
-W:	http://hackndev.com
 S:	Maintained
-F:	arch/arm/mach-pxa/include/mach/palmtx.h
-F:	arch/arm/mach-pxa/palmtx.c
-F:	arch/arm/mach-pxa/palmt5.*
+W:	http://hackndev.com
 F:	arch/arm/mach-pxa/include/mach/palmld.h
-F:	arch/arm/mach-pxa/palmld.c
-F:	arch/arm/mach-pxa/palmte2.*
 F:	arch/arm/mach-pxa/include/mach/palmtc.h
+F:	arch/arm/mach-pxa/include/mach/palmtx.h
+F:	arch/arm/mach-pxa/palmld.c
+F:	arch/arm/mach-pxa/palmt5.*
 F:	arch/arm/mach-pxa/palmtc.c
+F:	arch/arm/mach-pxa/palmte2.*
+F:	arch/arm/mach-pxa/palmtx.c
 
 ARM/PALMZ72 SUPPORT
 M:	Sergey Lapin <slapin@ossfans.org>
 L:	linux-arm-kernel@lists.infradead.org
-W:	http://hackndev.com
 S:	Maintained
+W:	http://hackndev.com
 F:	arch/arm/mach-pxa/palmz72.*
 
 ARM/PLEB SUPPORT
 M:	Peter Chubb <pleb@gelato.unsw.edu.au>
-W:	http://www.disy.cse.unsw.edu.au/Hardware/PLEB
 S:	Maintained
+W:	http://www.disy.cse.unsw.edu.au/Hardware/PLEB
 
 ARM/PT DIGITAL BOARD PORT
 M:	Stefan Eletzhofer <stefan.eletzhofer@eletztrick.de>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W:	http://www.armlinux.org.uk/
 S:	Maintained
+W:	http://www.armlinux.org.uk/
 
 ARM/QUALCOMM SUPPORT
 M:	Andy Gross <agross@kernel.org>
 M:	Bjorn Andersson <bjorn.andersson@linaro.org>
 L:	linux-arm-msm@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/soc/qcom/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git
 F:	Documentation/devicetree/bindings/*/qcom*
+F:	Documentation/devicetree/bindings/soc/qcom/
 F:	arch/arm/boot/dts/qcom-*.dts
 F:	arch/arm/boot/dts/qcom-*.dtsi
 F:	arch/arm/mach-qcom/
 F:	arch/arm64/boot/dts/qcom/
-F:	drivers/*/qcom/
-F:	drivers/*/qcom*
-F:	drivers/*/*/qcom/
 F:	drivers/*/*/qcom*
+F:	drivers/*/*/qcom/
 F:	drivers/*/pm8???-*
+F:	drivers/*/qcom*
+F:	drivers/*/qcom/
 F:	drivers/bluetooth/btqcomsmd.c
 F:	drivers/clocksource/timer-qcom.c
 F:	drivers/extcon/extcon-qcom*
-F:	drivers/iommu/msm*
-F:	drivers/i2c/busses/i2c-qup.c
 F:	drivers/i2c/busses/i2c-qcom-geni.c
+F:	drivers/i2c/busses/i2c-qup.c
+F:	drivers/iommu/msm*
 F:	drivers/mfd/ssbi.c
 F:	drivers/mmc/host/mmci_qcom*
 F:	drivers/mmc/host/sdhci-msm.c
@@ -2220,14 +2238,13 @@
 F:	drivers/power/*/msm*
 F:	drivers/reset/reset-qcom-*
 F:	drivers/scsi/ufs/ufs-qcom.*
-F:	drivers/spi/spi-qup.c
 F:	drivers/spi/spi-geni-qcom.c
 F:	drivers/spi/spi-qcom-qspi.c
+F:	drivers/spi/spi-qup.c
 F:	drivers/tty/serial/msm_serial.c
 F:	drivers/usb/dwc3/dwc3-qcom.c
 F:	include/dt-bindings/*/qcom*
 F:	include/linux/*/qcom*
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git
 
 ARM/RADISYS ENP2611 MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>
@@ -2239,42 +2256,42 @@
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-unisoc@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-F:	arch/arm/boot/dts/rda8810pl-*
-F:	drivers/clocksource/timer-rda.c
-F:	drivers/gpio/gpio-rda.c
-F:	drivers/irqchip/irq-rda-intc.c
-F:	drivers/tty/serial/rda-uart.c
 F:	Documentation/devicetree/bindings/arm/rda.yaml
 F:	Documentation/devicetree/bindings/gpio/gpio-rda.yaml
 F:	Documentation/devicetree/bindings/interrupt-controller/rda,8810pl-intc.txt
 F:	Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt
 F:	Documentation/devicetree/bindings/timer/rda,8810pl-timer.txt
+F:	arch/arm/boot/dts/rda8810pl-*
+F:	drivers/clocksource/timer-rda.c
+F:	drivers/gpio/gpio-rda.c
+F:	drivers/irqchip/irq-rda-intc.c
+F:	drivers/tty/serial/rda-uart.c
 
 ARM/REALTEK ARCHITECTURE
 M:	Andreas Färber <afaerber@suse.de>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-realtek-soc@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-F:	arch/arm64/boot/dts/realtek/
 F:	Documentation/devicetree/bindings/arm/realtek.yaml
+F:	arch/arm64/boot/dts/realtek/
 
 ARM/RENESAS ARM64 ARCHITECTURE
 M:	Geert Uytterhoeven <geert+renesas@glider.be>
 M:	Magnus Damm <magnus.damm@gmail.com>
 L:	linux-renesas-soc@vger.kernel.org
+S:	Supported
 Q:	http://patchwork.kernel.org/project/linux-renesas-soc/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel.git next
-S:	Supported
-F:	arch/arm64/boot/dts/renesas/
 F:	Documentation/devicetree/bindings/arm/renesas.yaml
+F:	arch/arm64/boot/dts/renesas/
 F:	drivers/soc/renesas/
 F:	include/linux/soc/renesas/
 
 ARM/RISCPC ARCHITECTURE
 M:	Russell King <linux@armlinux.org.uk>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W:	http://www.armlinux.org.uk/
 S:	Maintained
+W:	http://www.armlinux.org.uk/
 F:	arch/arm/include/asm/hardware/entry-macro-iomd.S
 F:	arch/arm/include/asm/hardware/ioc.h
 F:	arch/arm/include/asm/hardware/iomd.h
@@ -2289,18 +2306,18 @@
 M:	Heiko Stuebner <heiko@sntech.de>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-rockchip@lists.infradead.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git
 S:	Maintained
-F:	Documentation/devicetree/bindings/i2c/i2c-rk3x.txt
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git
+F:	Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml
 F:	Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
 F:	Documentation/devicetree/bindings/spi/spi-rockchip.yaml
 F:	arch/arm/boot/dts/rk3*
 F:	arch/arm/boot/dts/rv1108*
 F:	arch/arm/mach-rockchip/
+F:	drivers/*/*/*rockchip*
+F:	drivers/*/*rockchip*
 F:	drivers/clk/rockchip/
 F:	drivers/i2c/busses/i2c-rk3x.c
-F:	drivers/*/*rockchip*
-F:	drivers/*/*/*rockchip*
 F:	sound/soc/rockchip/
 N:	rockchip
 
@@ -2309,28 +2326,28 @@
 M:	Krzysztof Kozlowski <krzk@kernel.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
-Q:	https://patchwork.kernel.org/project/linux-samsung-soc/list/
 S:	Maintained
+Q:	https://patchwork.kernel.org/project/linux-samsung-soc/list/
+F:	Documentation/arm/samsung/
+F:	Documentation/devicetree/bindings/arm/samsung/
+F:	Documentation/devicetree/bindings/power/pd-samsung.yaml
+F:	arch/arm/boot/dts/exynos*
 F:	arch/arm/boot/dts/s3c*
 F:	arch/arm/boot/dts/s5p*
-F:	arch/arm/boot/dts/exynos*
-F:	arch/arm64/boot/dts/exynos/
-F:	arch/arm/plat-samsung/
+F:	arch/arm/mach-exynos*/
 F:	arch/arm/mach-s3c24*/
 F:	arch/arm/mach-s3c64xx/
 F:	arch/arm/mach-s5p*/
-F:	arch/arm/mach-exynos*/
-F:	drivers/*/*s3c24*
+F:	arch/arm/plat-samsung/
+F:	arch/arm64/boot/dts/exynos/
 F:	drivers/*/*/*s3c24*
+F:	drivers/*/*s3c24*
 F:	drivers/*/*s3c64xx*
 F:	drivers/*/*s5pv210*
 F:	drivers/memory/samsung/
 F:	drivers/soc/samsung/
 F:	drivers/tty/serial/samsung*
 F:	include/linux/soc/samsung/
-F:	Documentation/arm/samsung/
-F:	Documentation/devicetree/bindings/arm/samsung/
-F:	Documentation/devicetree/bindings/power/pd-samsung.yaml
 N:	exynos
 
 ARM/SAMSUNG MOBILE MACHINE SUPPORT
@@ -2353,8 +2370,8 @@
 L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
 L:	linux-media@vger.kernel.org
 S:	Maintained
-F:	drivers/media/platform/s5p-cec/
 F:	Documentation/devicetree/bindings/media/s5p-cec.txt
+F:	drivers/media/platform/s5p-cec/
 
 ARM/SAMSUNG S5P SERIES JPEG CODEC SUPPORT
 M:	Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
@@ -2379,9 +2396,10 @@
 M:	Geert Uytterhoeven <geert+renesas@glider.be>
 M:	Magnus Damm <magnus.damm@gmail.com>
 L:	linux-renesas-soc@vger.kernel.org
+S:	Supported
 Q:	http://patchwork.kernel.org/project/linux-renesas-soc/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel.git next
-S:	Supported
+F:	Documentation/devicetree/bindings/arm/renesas.yaml
 F:	arch/arm/boot/dts/emev2*
 F:	arch/arm/boot/dts/gr-peach*
 F:	arch/arm/boot/dts/iwg20d-q7*
@@ -2392,20 +2410,19 @@
 F:	arch/arm/configs/shmobile_defconfig
 F:	arch/arm/include/debug/renesas-scif.S
 F:	arch/arm/mach-shmobile/
-F:	Documentation/devicetree/bindings/arm/renesas.yaml
 F:	drivers/soc/renesas/
 F:	include/linux/soc/renesas/
 
 ARM/SOCFPGA ARCHITECTURE
 M:	Dinh Nguyen <dinguyen@kernel.org>
 S:	Maintained
-F:	arch/arm/mach-socfpga/
-F:	arch/arm/boot/dts/socfpga*
-F:	arch/arm/configs/socfpga_defconfig
-F:	arch/arm64/boot/dts/altera/
-F:	arch/arm64/boot/dts/intel/
 W:	http://www.rocketboards.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git
+F:	arch/arm/boot/dts/socfpga*
+F:	arch/arm/configs/socfpga_defconfig
+F:	arch/arm/mach-socfpga/
+F:	arch/arm64/boot/dts/altera/
+F:	arch/arm64/boot/dts/intel/
 
 ARM/SOCFPGA CLOCK FRAMEWORK SUPPORT
 M:	Dinh Nguyen <dinguyen@kernel.org>
@@ -2430,19 +2447,20 @@
 ARM/STI ARCHITECTURE
 M:	Patrice Chotard <patrice.chotard@st.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W:	http://www.stlinux.com
 S:	Maintained
+W:	http://www.stlinux.com
 F:	Documentation/devicetree/bindings/i2c/i2c-st.txt
-F:	arch/arm/mach-sti/
 F:	arch/arm/boot/dts/sti*
+F:	arch/arm/mach-sti/
+F:	drivers/ata/ahci_st.c
 F:	drivers/char/hw_random/st-rng.c
 F:	drivers/clocksource/arm_global_timer.c
 F:	drivers/clocksource/clksrc_st_lpc.c
 F:	drivers/cpufreq/sti-cpufreq.c
 F:	drivers/dma/st_fdma*
 F:	drivers/i2c/busses/i2c-st.c
-F:	drivers/media/rc/st_rc.c
 F:	drivers/media/platform/sti/c8sectpfe/
+F:	drivers/media/rc/st_rc.c
 F:	drivers/mmc/host/sdhci-st.c
 F:	drivers/phy/st/phy-miphy28lp.c
 F:	drivers/phy/st/phy-stih407-usb.c
@@ -2456,7 +2474,6 @@
 F:	drivers/usb/host/ehci-st.c
 F:	drivers/usb/host/ohci-st.c
 F:	drivers/watchdog/st_lpc_wdt.c
-F:	drivers/ata/ahci_st.c
 F:	include/linux/remoteproc/st_slim_rproc.h
 
 ARM/STM32 ARCHITECTURE
@@ -2466,19 +2483,19 @@
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32.git stm32-next
-N:	stm32
-N:	stm
 F:	arch/arm/boot/dts/stm32*
 F:	arch/arm/mach-stm32/
 F:	drivers/clocksource/armv7m_systick.c
+N:	stm32
+N:	stm
 
 ARM/Synaptics SoC support
 M:	Jisheng Zhang <Jisheng.Zhang@synaptics.com>
 M:	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-F:	arch/arm/mach-berlin/
 F:	arch/arm/boot/dts/berlin*
+F:	arch/arm/mach-berlin/
 F:	arch/arm64/boot/dts/synaptics/
 
 ARM/TANGO ARCHITECTURE
@@ -2498,8 +2515,8 @@
 L:	linux-tegra@vger.kernel.org
 L:	linux-media@vger.kernel.org
 S:	Maintained
-F:	drivers/media/platform/tegra-cec/
 F:	Documentation/devicetree/bindings/media/tegra-cec.txt
+F:	drivers/media/platform/tegra-cec/
 
 ARM/TETON BGA MACHINE SUPPORT
 M:	"Mark F. Brown" <mark.brown314@gmail.com>
@@ -2512,23 +2529,13 @@
 S:	Maintained
 F:	drivers/memory/*emif*
 
-ARM/TEXAS INSTRUMENTS K3 ARCHITECTURE
-M:	Tero Kristo <t-kristo@ti.com>
-M:	Nishanth Menon <nm@ti.com>
-L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Supported
-F:	Documentation/devicetree/bindings/arm/ti/k3.txt
-F:	arch/arm64/boot/dts/ti/Makefile
-F:	arch/arm64/boot/dts/ti/k3-*
-F:	include/dt-bindings/pinctrl/k3.h
-
 ARM/TEXAS INSTRUMENT KEYSTONE ARCHITECTURE
 M:	Santosh Shilimkar <ssantosh@kernel.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-F:	arch/arm/mach-keystone/
-F:	arch/arm/boot/dts/keystone-*
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone.git
+F:	arch/arm/boot/dts/keystone-*
+F:	arch/arm/mach-keystone/
 
 ARM/TEXAS INSTRUMENT KEYSTONE CLOCK FRAMEWORK
 M:	Santosh Shilimkar <ssantosh@kernel.org>
@@ -2549,6 +2556,16 @@
 S:	Maintained
 F:	drivers/power/reset/keystone-reset.c
 
+ARM/TEXAS INSTRUMENTS K3 ARCHITECTURE
+M:	Tero Kristo <t-kristo@ti.com>
+M:	Nishanth Menon <nm@ti.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Supported
+F:	Documentation/devicetree/bindings/arm/ti/k3.txt
+F:	arch/arm64/boot/dts/ti/Makefile
+F:	arch/arm64/boot/dts/ti/k3-*
+F:	include/dt-bindings/pinctrl/k3.h
+
 ARM/THECUS N2100 MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -2562,11 +2579,11 @@
 ARM/UNIPHIER ARCHITECTURE
 M:	Masahiro Yamada <yamada.masahiro@socionext.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier.git
 S:	Maintained
-F:	Documentation/devicetree/bindings/arm/socionext/uniphier.txt
-F:	Documentation/devicetree/bindings/gpio/gpio-uniphier.txt
-F:	Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.txt
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier.git
+F:	Documentation/devicetree/bindings/arm/socionext/uniphier.yaml
+F:	Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
+F:	Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
 F:	arch/arm/boot/dts/uniphier*
 F:	arch/arm/include/asm/hardware/cache-uniphier.h
 F:	arch/arm/mach-uniphier/
@@ -2584,24 +2601,17 @@
 F:	drivers/tty/serial/8250/8250_uniphier.c
 N:	uniphier
 
-Ux500 CLOCK DRIVERS
-M:	Ulf Hansson <ulf.hansson@linaro.org>
-L:	linux-clk@vger.kernel.org
-L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Maintained
-F:	drivers/clk/ux500/
-
 ARM/VERSATILE EXPRESS PLATFORM
 M:	Liviu Dudau <liviu.dudau@arm.com>
 M:	Sudeep Holla <sudeep.holla@arm.com>
 M:	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-F:	arch/arm/boot/dts/vexpress*
-F:	arch/arm64/boot/dts/arm/
-F:	arch/arm/mach-vexpress/
-F:	*/*/vexpress*
 F:	*/*/*/vexpress*
+F:	*/*/vexpress*
+F:	arch/arm/boot/dts/vexpress*
+F:	arch/arm/mach-vexpress/
+F:	arch/arm64/boot/dts/arm/
 F:	drivers/clk/versatile/clk-vexpress-osc.c
 F:	drivers/clocksource/timer-versatile.c
 N:	mps2
@@ -2609,16 +2619,16 @@
 ARM/VFP SUPPORT
 M:	Russell King <linux@armlinux.org.uk>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W:	http://www.armlinux.org.uk/
 S:	Maintained
+W:	http://www.armlinux.org.uk/
 F:	arch/arm/vfp/
 
 ARM/VOIPAC PXA270 SUPPORT
 M:	Marek Vasut <marek.vasut@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-F:	arch/arm/mach-pxa/vpac270.c
 F:	arch/arm/mach-pxa/include/mach/vpac270.h
+F:	arch/arm/mach-pxa/vpac270.c
 
 ARM/VT8500 ARM ARCHITECTURE
 M:	Tony Prisk <linux@prisktech.co.nz>
@@ -2642,26 +2652,14 @@
 M:	Marek Vasut <marek.vasut@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-F:	arch/arm/mach-pxa/z2.c
 F:	arch/arm/mach-pxa/include/mach/z2.h
+F:	arch/arm/mach-pxa/z2.c
 
 ARM/ZTE ARCHITECTURE
 M:	Jun Nie <jun.nie@linaro.org>
 M:	Shawn Guo <shawnguo@kernel.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-F:	arch/arm/boot/dts/zx2967*
-F:	arch/arm/mach-zx/
-F:	arch/arm64/boot/dts/zte/
-F:	drivers/clk/zte/
-F:	drivers/dma/zx_dma.c
-F:	drivers/gpio/gpio-zx.c
-F:	drivers/i2c/busses/i2c-zx2967.c
-F:	drivers/mmc/host/dw_mmc-zx.*
-F:	drivers/pinctrl/zte/
-F:	drivers/soc/zte/
-F:	drivers/thermal/zx2967_thermal.c
-F:	drivers/watchdog/zx2967_wdt.c
 F:	Documentation/devicetree/bindings/arm/zte.yaml
 F:	Documentation/devicetree/bindings/clock/zx2967*.txt
 F:	Documentation/devicetree/bindings/dma/zxdma.txt
@@ -2674,6 +2672,18 @@
 F:	Documentation/devicetree/bindings/sound/zte,*.txt
 F:	Documentation/devicetree/bindings/thermal/zx2967-thermal.txt
 F:	Documentation/devicetree/bindings/watchdog/zte,zx2967-wdt.txt
+F:	arch/arm/boot/dts/zx2967*
+F:	arch/arm/mach-zx/
+F:	arch/arm64/boot/dts/zte/
+F:	drivers/clk/zte/
+F:	drivers/dma/zx_dma.c
+F:	drivers/gpio/gpio-zx.c
+F:	drivers/i2c/busses/i2c-zx2967.c
+F:	drivers/mmc/host/dw_mmc-zx.*
+F:	drivers/pinctrl/zte/
+F:	drivers/soc/zte/
+F:	drivers/thermal/zx2967_thermal.c
+F:	drivers/watchdog/zx2967_wdt.c
 F:	include/dt-bindings/clock/zx2967*.h
 F:	include/dt-bindings/soc/zte,*.h
 F:	sound/soc/codecs/zx_aud96p22.c
@@ -2682,32 +2692,32 @@
 ARM/ZYNQ ARCHITECTURE
 M:	Michal Simek <michal.simek@xilinx.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Supported
 W:	http://wiki.xilinx.com
 T:	git https://github.com/Xilinx/linux-xlnx.git
-S:	Supported
-F:	arch/arm/mach-zynq/
-F:	drivers/cpuidle/cpuidle-zynq.c
-F:	drivers/block/xsysace.c
-N:	zynq
-N:	xilinx
 F:	Documentation/devicetree/bindings/i2c/i2c-cadence.txt
 F:	Documentation/devicetree/bindings/i2c/i2c-xiic.txt
+F:	arch/arm/mach-zynq/
+F:	drivers/block/xsysace.c
 F:	drivers/clocksource/timer-cadence-ttc.c
-F:	drivers/i2c/busses/i2c-cadence.c
-F:	drivers/mmc/host/sdhci-of-arasan.c
+F:	drivers/cpuidle/cpuidle-zynq.c
 F:	drivers/edac/synopsys_edac.c
+F:	drivers/i2c/busses/i2c-cadence.c
 F:	drivers/i2c/busses/i2c-xiic.c
+F:	drivers/mmc/host/sdhci-of-arasan.c
+N:	zynq
+N:	xilinx
 
 ARM64 PORT (AARCH64 ARCHITECTURE)
 M:	Catalin Marinas <catalin.marinas@arm.com>
 M:	Will Deacon <will@kernel.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux.git
 S:	Maintained
-F:	arch/arm64/
-X:	arch/arm64/boot/dts/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux.git
 F:	Documentation/arm64/
+F:	arch/arm64/
 F:	tools/testing/selftests/arm64/
+X:	arch/arm64/boot/dts/
 
 AS3645A LED FLASH CONTROLLER DRIVER
 M:	Sakari Ailus <sakari.ailus@iki.fi>
@@ -2718,16 +2728,16 @@
 ASAHI KASEI AK7375 LENS VOICE COIL DRIVER
 M:	Tianshu Qiu <tian.shu.qiu@intel.com>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
-F:	drivers/media/i2c/ak7375.c
+T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/devicetree/bindings/media/i2c/ak7375.txt
+F:	drivers/media/i2c/ak7375.c
 
 ASAHI KASEI AK8974 DRIVER
 M:	Linus Walleij <linus.walleij@linaro.org>
 L:	linux-iio@vger.kernel.org
-W:	http://www.akm.com/
 S:	Supported
+W:	http://www.akm.com/
 F:	drivers/iio/magnetometer/ak8974.c
 
 ASC7621 HARDWARE MONITOR DRIVER
@@ -2743,8 +2753,8 @@
 L:	openbmc@lists.ozlabs.org (moderated for non-subscribers)
 L:	linux-gpio@vger.kernel.org
 S:	Maintained
-F:	drivers/pinctrl/aspeed/
 F:	Documentation/devicetree/bindings/pinctrl/aspeed,*
+F:	drivers/pinctrl/aspeed/
 
 ASPEED SCU INTERRUPT CONTROLLER DRIVER
 M:	Eddie James <eajames@linux.ibm.com>
@@ -2759,8 +2769,8 @@
 L:	linux-media@vger.kernel.org
 L:	openbmc@lists.ozlabs.org (moderated for non-subscribers)
 S:	Maintained
-F:	drivers/media/platform/aspeed-video.c
 F:	Documentation/devicetree/bindings/media/aspeed-video.txt
+F:	drivers/media/platform/aspeed-video.c
 
 ASUS NOTEBOOKS AND EEEPC ACPI/WMI EXTRAS DRIVERS
 M:	Corentin Chary <corentin.chary@gmail.com>
@@ -2782,33 +2792,33 @@
 L:	keyrings@vger.kernel.org
 S:	Maintained
 F:	Documentation/crypto/asymmetric-keys.txt
-F:	include/linux/verification.h
-F:	include/crypto/public_key.h
-F:	include/crypto/pkcs7.h
 F:	crypto/asymmetric_keys/
+F:	include/crypto/pkcs7.h
+F:	include/crypto/public_key.h
+F:	include/linux/verification.h
 
 ASYNCHRONOUS TRANSFERS/TRANSFORMS (IOAT) API
 R:	Dan Williams <dan.j.williams@intel.com>
-W:	http://sourceforge.net/projects/xscaleiop
 S:	Odd fixes
+W:	http://sourceforge.net/projects/xscaleiop
 F:	Documentation/crypto/async-tx-api.txt
 F:	crypto/async_tx/
 F:	drivers/dma/
-F:	include/linux/dmaengine.h
 F:	include/linux/async_tx.h
+F:	include/linux/dmaengine.h
 
 AT24 EEPROM DRIVER
 M:	Bartosz Golaszewski <bgolaszewski@baylibre.com>
 L:	linux-i2c@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux.git
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux.git
 F:	Documentation/devicetree/bindings/eeprom/at24.yaml
 F:	drivers/misc/eeprom/at24.c
 
 ATA OVER ETHERNET (AOE) DRIVER
 M:	"Justin Sanders" <justin@coraid.com>
-W:	http://www.openaoe.org/
 S:	Supported
+W:	http://www.openaoe.org/
 F:	Documentation/admin-guide/aoe/
 F:	drivers/block/aoe/
 
@@ -2822,11 +2832,11 @@
 
 ATHEROS 71XX/9XXX USB PHY DRIVER
 M:	Alban Bedel <albeu@free.fr>
+S:	Maintained
 W:	https://github.com/AlbanBedel/linux
 T:	git git://github.com/AlbanBedel/linux
-S:	Maintained
-F:	drivers/phy/qualcomm/phy-ath79-usb.c
 F:	Documentation/devicetree/bindings/phy/phy-ath79-usb.txt
+F:	drivers/phy/qualcomm/phy-ath79-usb.c
 
 ATHEROS ATH GENERIC UTILITIES
 M:	Kalle Valo <kvalo@codeaurora.org>
@@ -2839,16 +2849,16 @@
 M:	Nick Kossifidis <mickflemm@gmail.com>
 M:	Luis Chamberlain <mcgrof@kernel.org>
 L:	linux-wireless@vger.kernel.org
-W:	http://wireless.kernel.org/en/users/Drivers/ath5k
 S:	Maintained
+W:	http://wireless.kernel.org/en/users/Drivers/ath5k
 F:	drivers/net/wireless/ath/ath5k/
 
 ATHEROS ATH6KL WIRELESS DRIVER
 M:	Kalle Valo <kvalo@codeaurora.org>
 L:	linux-wireless@vger.kernel.org
+S:	Supported
 W:	http://wireless.kernel.org/en/users/Drivers/ath6kl
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
-S:	Supported
 F:	drivers/net/wireless/ath/ath6kl/
 
 ATI_REMOTE2 DRIVER
@@ -2866,17 +2876,17 @@
 M:	Jay Cliburn <jcliburn@gmail.com>
 M:	Chris Snook <chris.snook@gmail.com>
 L:	netdev@vger.kernel.org
+S:	Maintained
 W:	http://sourceforge.net/projects/atl1
 W:	http://atl1.sourceforge.net
-S:	Maintained
 F:	drivers/net/ethernet/atheros/
 
 ATM
 M:	Chas Williams <3chas3@gmail.com>
 L:	linux-atm-general@lists.sourceforge.net (moderated for non-subscribers)
 L:	netdev@vger.kernel.org
-W:	http://linux-atm.sourceforge.net
 S:	Maintained
+W:	http://linux-atm.sourceforge.net
 F:	drivers/atm/
 F:	include/linux/atm*
 F:	include/uapi/linux/atm*
@@ -2888,17 +2898,17 @@
 
 ATMEL MAXTOUCH DRIVER
 M:	Nick Dyer <nick@shmanahar.org>
-T:	git git://github.com/ndyer/linux.git
 S:	Maintained
+T:	git git://github.com/ndyer/linux.git
 F:	Documentation/devicetree/bindings/input/atmel,maxtouch.txt
 F:	drivers/input/touchscreen/atmel_mxt_ts.c
 
 ATMEL WIRELESS DRIVER
 M:	Simon Kelley <simon@thekelleys.org.uk>
 L:	linux-wireless@vger.kernel.org
+S:	Maintained
 W:	http://www.thekelleys.org.uk/atmel
 W:	http://atmelwlandriver.sourceforge.net/
-S:	Maintained
 F:	drivers/net/wireless/atmel/atmel*
 
 ATOMIC INFRASTRUCTURE
@@ -2914,25 +2924,25 @@
 ATTO EXPRESSSAS SAS/SATA RAID SCSI DRIVER
 M:	Bradley Grove <linuxdrivers@attotech.com>
 L:	linux-scsi@vger.kernel.org
-W:	http://www.attotech.com
 S:	Supported
+W:	http://www.attotech.com
 F:	drivers/scsi/esas2r
 
 ATUSB IEEE 802.15.4 RADIO DRIVER
 M:	Stefan Schmidt <stefan@datenfreihafen.org>
 L:	linux-wpan@vger.kernel.org
 S:	Maintained
+F:	drivers/net/ieee802154/at86rf230.h
 F:	drivers/net/ieee802154/atusb.c
 F:	drivers/net/ieee802154/atusb.h
-F:	drivers/net/ieee802154/at86rf230.h
 
 AUDIT SUBSYSTEM
 M:	Paul Moore <paul@paul-moore.com>
 M:	Eric Paris <eparis@redhat.com>
 L:	linux-audit@redhat.com (moderated for non-subscribers)
+S:	Supported
 W:	https://github.com/linux-audit
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit.git
-S:	Supported
 F:	include/linux/audit.h
 F:	include/uapi/linux/audit.h
 F:	kernel/audit*
@@ -2953,10 +2963,10 @@
 AX.25 NETWORK LAYER
 M:	Ralf Baechle <ralf@linux-mips.org>
 L:	linux-hams@vger.kernel.org
-W:	http://www.linux-ax25.org/
 S:	Maintained
-F:	include/uapi/linux/ax25.h
+W:	http://www.linux-ax25.org/
 F:	include/net/ax25.h
+F:	include/uapi/linux/ax25.h
 F:	net/ax25/
 
 AXENTIA ARM DEVICES
@@ -2977,11 +2987,11 @@
 
 AXI-FAN-CONTROL HARDWARE MONITOR DRIVER
 M:	Nuno Sá <nuno.sa@analog.com>
-W:	http://ez.analog.com/community/linux-device-drivers
 L:	linux-hwmon@vger.kernel.org
 S:	Supported
-F:	drivers/hwmon/axi-fan-control.c
+W:	http://ez.analog.com/community/linux-device-drivers
 F:	Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
+F:	drivers/hwmon/axi-fan-control.c
 
 AXXIA I2C CONTROLLER
 M:	Krzysztof Adamski <krzysztof.adamski@nokia.com>
@@ -2993,32 +3003,32 @@
 AZ6007 DVB DRIVER
 M:	Mauro Carvalho Chehab <mchehab@kernel.org>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
-S:	Maintained
 F:	drivers/media/usb/dvb-usb-v2/az6007.c
 
 AZTECH FM RADIO RECEIVER DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
-W:	https://linuxtv.org
 S:	Maintained
+W:	https://linuxtv.org
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/radio/radio-aztech*
 
 B43 WIRELESS DRIVER
 L:	linux-wireless@vger.kernel.org
 L:	b43-dev@lists.infradead.org
-W:	http://wireless.kernel.org/en/users/Drivers/b43
 S:	Odd Fixes
+W:	http://wireless.kernel.org/en/users/Drivers/b43
 F:	drivers/net/wireless/broadcom/b43/
 
 B43LEGACY WIRELESS DRIVER
 M:	Larry Finger <Larry.Finger@lwfinger.net>
 L:	linux-wireless@vger.kernel.org
 L:	b43-dev@lists.infradead.org
-W:	http://wireless.kernel.org/en/users/Drivers/b43
 S:	Maintained
+W:	http://wireless.kernel.org/en/users/Drivers/b43
 F:	drivers/net/wireless/broadcom/b43legacy/
 
 BACKLIGHT CLASS/SUBSYSTEM
@@ -3026,14 +3036,14 @@
 M:	Daniel Thompson <daniel.thompson@linaro.org>
 M:	Jingoo Han <jingoohan1@gmail.com>
 L:	dri-devel@lists.freedesktop.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight.git
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight.git
+F:	Documentation/ABI/stable/sysfs-class-backlight
+F:	Documentation/ABI/testing/sysfs-class-backlight
+F:	Documentation/devicetree/bindings/leds/backlight
 F:	drivers/video/backlight/
 F:	include/linux/backlight.h
 F:	include/linux/pwm_backlight.h
-F:	Documentation/devicetree/bindings/leds/backlight
-F:	Documentation/ABI/stable/sysfs-class-backlight
-F:	Documentation/ABI/testing/sysfs-class-backlight
 
 BATMAN ADVANCED
 M:	Marek Lindner <mareklindner@neomailbox.ch>
@@ -3041,12 +3051,12 @@
 M:	Antonio Quartulli <a@unstable.cc>
 M:	Sven Eckelmann <sven@narfation.org>
 L:	b.a.t.m.a.n@lists.open-mesh.org (moderated for non-subscribers)
+S:	Maintained
 W:	https://www.open-mesh.org/
+Q:	https://patchwork.open-mesh.org/project/batman/list/
 B:	https://www.open-mesh.org/projects/batman-adv/issues
 C:	irc://chat.freenode.net/batman
-Q:	https://patchwork.open-mesh.org/project/batman/list/
 T:	git https://git.open-mesh.org/linux-merge.git
-S:	Maintained
 F:	Documentation/ABI/obsolete/sysfs-class-net-batman-adv
 F:	Documentation/ABI/obsolete/sysfs-class-net-mesh
 F:	Documentation/networking/batman-adv.rst
@@ -3057,25 +3067,25 @@
 BAYCOM/HDLCDRV DRIVERS FOR AX.25
 M:	Thomas Sailer <t.sailer@alumni.ethz.ch>
 L:	linux-hams@vger.kernel.org
-W:	http://www.baycom.org/~tom/ham/ham.html
 S:	Maintained
+W:	http://www.baycom.org/~tom/ham/ham.html
 F:	drivers/net/hamradio/baycom*
 
 BCACHE (BLOCK LAYER CACHE)
 M:	Coly Li <colyli@suse.de>
 M:	Kent Overstreet <kent.overstreet@gmail.com>
 L:	linux-bcache@vger.kernel.org
+S:	Maintained
 W:	http://bcache.evilpiepirate.org
 C:	irc://irc.oftc.net/bcache
-S:	Maintained
 F:	drivers/md/bcache/
 
 BDISP ST MEDIA DRIVER
 M:	Fabien Dessenne <fabien.dessenne@st.com>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
-W:	https://linuxtv.org
 S:	Supported
+W:	https://linuxtv.org
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/platform/sti/bdisp
 
 BECKHOFF CX5020 ETHERCAT MASTER DRIVER
@@ -3097,8 +3107,8 @@
 M:	Jens Axboe <axboe@kernel.dk>
 L:	linux-block@vger.kernel.org
 S:	Maintained
-F:	block/bfq-*
 F:	Documentation/block/bfq-iosched.rst
+F:	block/bfq-*
 
 BFS FILE SYSTEM
 M:	"Tigran A. Aivazian" <aivazian.tigran@gmail.com>
@@ -3115,8 +3125,8 @@
 BLOCK LAYER
 M:	Jens Axboe <axboe@kernel.dk>
 L:	linux-block@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git
 F:	block/
 F:	drivers/block/
 F:	kernel/trace/blktrace.c
@@ -3132,30 +3142,30 @@
 M:	Marcel Holtmann <marcel@holtmann.org>
 M:	Johan Hedberg <johan.hedberg@gmail.com>
 L:	linux-bluetooth@vger.kernel.org
+S:	Maintained
 W:	http://www.bluez.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git
-S:	Maintained
 F:	drivers/bluetooth/
 
 BLUETOOTH SUBSYSTEM
 M:	Marcel Holtmann <marcel@holtmann.org>
 M:	Johan Hedberg <johan.hedberg@gmail.com>
 L:	linux-bluetooth@vger.kernel.org
+S:	Maintained
 W:	http://www.bluez.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git
-S:	Maintained
-F:	net/bluetooth/
 F:	include/net/bluetooth/
+F:	net/bluetooth/
 
 BONDING DRIVER
 M:	Jay Vosburgh <j.vosburgh@gmail.com>
 M:	Veaceslav Falico <vfalico@gmail.com>
 M:	Andy Gospodarek <andy@greyhouse.net>
 L:	netdev@vger.kernel.org
-W:	http://sourceforge.net/projects/bonding/
 S:	Supported
+W:	http://sourceforge.net/projects/bonding/
 F:	drivers/net/bonding/
 F:	include/uapi/linux/if_bonding.h
 
@@ -3163,8 +3173,8 @@
 M:	Dan Robertson <dan@dlrobertson.com>
 L:	linux-iio@vger.kernel.org
 S:	Maintained
-F:	drivers/iio/accel/bma400*
 F:	Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
+F:	drivers/iio/accel/bma400*
 
 BPF (Safe dynamic programs and tools)
 M:	Alexei Starovoitov <ast@kernel.org>
@@ -3177,13 +3187,13 @@
 R:	KP Singh <kpsingh@chromium.org>
 L:	netdev@vger.kernel.org
 L:	bpf@vger.kernel.org
+S:	Supported
+Q:	https://patchwork.ozlabs.org/project/netdev/list/?delegate=77147
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next.git
-Q:	https://patchwork.ozlabs.org/project/netdev/list/?delegate=77147
-S:	Supported
-F:	arch/*/net/*
-F:	Documentation/networking/filter.txt
 F:	Documentation/bpf/
+F:	Documentation/networking/filter.txt
+F:	arch/*/net/*
 F:	include/linux/bpf*
 F:	include/linux/filter.h
 F:	include/trace/events/xdp.h
@@ -3200,8 +3210,8 @@
 F:	tools/bpf/
 F:	tools/lib/bpf/
 F:	tools/testing/selftests/bpf/
-K:	bpf
 N:	bpf
+K:	bpf
 
 BPF JIT for ARM
 M:	Shubham Bansal <illusionist.neo@gmail.com>
@@ -3305,31 +3315,31 @@
 F:	drivers/net/dsa/b53/*
 F:	include/linux/platform_data/b53.h
 
-BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITECTURE
-M:	Florian Fainelli <f.fainelli@gmail.com>
-M:	Ray Jui <rjui@broadcom.com>
-M:	Scott Branden <sbranden@broadcom.com>
-M:	bcm-kernel-feedback-list@broadcom.com
-T:	git git://github.com/broadcom/mach-bcm
-S:	Maintained
-N:	bcm281*
-N:	bcm113*
-N:	bcm216*
-N:	kona
-F:	arch/arm/mach-bcm/
-
 BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE
 M:	Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
 L:	bcm-kernel-feedback-list@broadcom.com
 L:	linux-rpi-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-T:	git git://github.com/anholt/linux
 S:	Maintained
-N:	bcm2711
-N:	bcm2835
-F:	drivers/staging/vc04_services
+T:	git git://github.com/anholt/linux
 F:	Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
 F:	drivers/pci/controller/pcie-brcmstb.c
+F:	drivers/staging/vc04_services
+N:	bcm2711
+N:	bcm2835
+
+BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITECTURE
+M:	Florian Fainelli <f.fainelli@gmail.com>
+M:	Ray Jui <rjui@broadcom.com>
+M:	Scott Branden <sbranden@broadcom.com>
+M:	bcm-kernel-feedback-list@broadcom.com
+S:	Maintained
+T:	git git://github.com/broadcom/mach-bcm
+F:	arch/arm/mach-bcm/
+N:	bcm281*
+N:	bcm113*
+N:	bcm216*
+N:	kona
 
 BROADCOM BCM47XX MIPS ARCHITECTURE
 M:	Hauke Mehrtens <hauke@hauke-m.de>
@@ -3346,25 +3356,25 @@
 M:	bcm-kernel-feedback-list@broadcom.com
 L:	linux-arm-kernel@lists.infradead.org
 S:	Maintained
-F:	arch/arm/mach-bcm/bcm_5301x.c
-F:	arch/arm/boot/dts/bcm5301x*.dtsi
 F:	arch/arm/boot/dts/bcm470*
+F:	arch/arm/boot/dts/bcm5301x*.dtsi
 F:	arch/arm/boot/dts/bcm953012*
+F:	arch/arm/mach-bcm/bcm_5301x.c
 
 BROADCOM BCM53573 ARM ARCHITECTURE
 M:	Rafał Miłecki <rafal@milecki.pl>
 L:	bcm-kernel-feedback-list@broadcom.com
 L:	linux-arm-kernel@lists.infradead.org
 S:	Maintained
-F:	arch/arm/boot/dts/bcm53573*
 F:	arch/arm/boot/dts/bcm47189*
+F:	arch/arm/boot/dts/bcm53573*
 
 BROADCOM BCM63XX ARM ARCHITECTURE
 M:	Florian Fainelli <f.fainelli@gmail.com>
 M:	bcm-kernel-feedback-list@broadcom.com
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-T:	git git://github.com/broadcom/stblinux.git
 S:	Maintained
+T:	git git://github.com/broadcom/stblinux.git
 N:	bcm63xx
 
 BROADCOM BCM63XX/BCM33XX UDC DRIVER
@@ -3377,16 +3387,16 @@
 M:	Florian Fainelli <f.fainelli@gmail.com>
 M:	bcm-kernel-feedback-list@broadcom.com
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-T:	git git://github.com/broadcom/stblinux.git
 S:	Maintained
-F:	arch/arm/mach-bcm/*brcmstb*
-F:	arch/arm/boot/dts/bcm7*.dts*
-F:	drivers/bus/brcmstb_gisb.c
-F:	arch/arm/mm/cache-b15-rac.c
-F:	arch/arm/include/asm/hardware/cache-b15-rac.h
-N:	brcmstb
+T:	git git://github.com/broadcom/stblinux.git
 F:	Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
+F:	arch/arm/boot/dts/bcm7*.dts*
+F:	arch/arm/include/asm/hardware/cache-b15-rac.h
+F:	arch/arm/mach-bcm/*brcmstb*
+F:	arch/arm/mm/cache-b15-rac.c
+F:	drivers/bus/brcmstb_gisb.c
 F:	drivers/pci/controller/pcie-brcmstb.c
+N:	brcmstb
 
 BROADCOM BMIPS CPUFREQ DRIVER
 M:	Markus Mayer <mmayer@broadcom.com>
@@ -3399,12 +3409,12 @@
 M:	Florian Fainelli <f.fainelli@gmail.com>
 L:	bcm-kernel-feedback-list@broadcom.com
 L:	linux-mips@vger.kernel.org
-T:	git git://github.com/broadcom/stblinux.git
 S:	Maintained
+T:	git git://github.com/broadcom/stblinux.git
 F:	arch/mips/bmips/*
+F:	arch/mips/boot/dts/brcm/bcm*.dts*
 F:	arch/mips/include/asm/mach-bmips/*
 F:	arch/mips/kernel/*bmips*
-F:	arch/mips/boot/dts/brcm/bcm*.dts*
 F:	drivers/irqchip/irq-bcm63*
 F:	drivers/irqchip/irq-bcm7*
 F:	drivers/irqchip/irq-brcmstb*
@@ -3469,8 +3479,8 @@
 L:	linux-i2c@vger.kernel.org
 L:	bcm-kernel-feedback-list@broadcom.com
 S:	Supported
+F:	Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml
 F:	drivers/i2c/busses/i2c-brcmstb.c
-F:	Documentation/devicetree/bindings/i2c/i2c-brcmstb.txt
 
 BROADCOM BRCMSTB USB2 and USB3 PHY DRIVER
 M:	Al Cooper <alcooperx@gmail.com>
@@ -3492,8 +3502,14 @@
 M:	Scott Branden <sbranden@broadcom.com>
 M:	bcm-kernel-feedback-list@broadcom.com
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-T:	git git://github.com/broadcom/cygnus-linux.git
 S:	Maintained
+T:	git git://github.com/broadcom/cygnus-linux.git
+F:	arch/arm64/boot/dts/broadcom/northstar2/*
+F:	arch/arm64/boot/dts/broadcom/stingray/*
+F:	drivers/clk/bcm/clk-ns*
+F:	drivers/clk/bcm/clk-sr*
+F:	drivers/pinctrl/bcm/pinctrl-ns*
+F:	include/dt-bindings/clock/bcm-sr*
 N:	iproc
 N:	cygnus
 N:	bcm[-_]nsp
@@ -3509,12 +3525,6 @@
 N:	bcm88312
 N:	hr2
 N:	stingray
-F:	arch/arm64/boot/dts/broadcom/northstar2/*
-F:	arch/arm64/boot/dts/broadcom/stingray/*
-F:	drivers/clk/bcm/clk-ns*
-F:	drivers/clk/bcm/clk-sr*
-F:	drivers/pinctrl/bcm/pinctrl-ns*
-F:	include/dt-bindings/clock/bcm-sr*
 
 BROADCOM KONA GPIO DRIVER
 M:	Ray Jui <rjui@broadcom.com>
@@ -3529,8 +3539,8 @@
 M:	Somnath Kotur <somnath.kotur@broadcom.com>
 M:	Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
 L:	linux-rdma@vger.kernel.org
-W:	http://www.broadcom.com
 S:	Supported
+W:	http://www.broadcom.com
 F:	drivers/infiniband/hw/bnxt_re/
 F:	include/uapi/rdma/bnxt_re-abi.h
 
@@ -3547,6 +3557,15 @@
 F:	drivers/bcma/
 F:	include/linux/bcma/
 
+BROADCOM SPI DRIVER
+M:	Kamal Dasu <kdasu.kdev@gmail.com>
+M:	bcm-kernel-feedback-list@broadcom.com
+S:	Maintained
+F:	Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt
+F:	drivers/spi/spi-bcm-qspi.*
+F:	drivers/spi/spi-brcmstb-qspi.c
+F:	drivers/spi/spi-iproc-qspi.c
+
 BROADCOM STB AVS CPUFREQ DRIVER
 M:	Markus Mayer <mmayer@broadcom.com>
 M:	bcm-kernel-feedback-list@broadcom.com
@@ -3563,14 +3582,6 @@
 F:	Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt
 F:	drivers/thermal/broadcom/brcmstb*
 
-BROADCOM STB NAND FLASH DRIVER
-M:	Brian Norris <computersforpeace@gmail.com>
-M:	Kamal Dasu <kdasu.kdev@gmail.com>
-L:	linux-mtd@lists.infradead.org
-L:	bcm-kernel-feedback-list@broadcom.com
-S:	Maintained
-F:	drivers/mtd/nand/raw/brcmnand/
-
 BROADCOM STB DPFE DRIVER
 M:	Markus Mayer <mmayer@broadcom.com>
 M:	bcm-kernel-feedback-list@broadcom.com
@@ -3579,14 +3590,13 @@
 F:	Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.txt
 F:	drivers/memory/brcmstb_dpfe.c
 
-BROADCOM SPI DRIVER
+BROADCOM STB NAND FLASH DRIVER
+M:	Brian Norris <computersforpeace@gmail.com>
 M:	Kamal Dasu <kdasu.kdev@gmail.com>
-M:	bcm-kernel-feedback-list@broadcom.com
+L:	linux-mtd@lists.infradead.org
+L:	bcm-kernel-feedback-list@broadcom.com
 S:	Maintained
-F:	Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt
-F:	drivers/spi/spi-bcm-qspi.*
-F:	drivers/spi/spi-brcmstb-qspi.c
-F:	drivers/spi/spi-iproc-qspi.c
+F:	drivers/mtd/nand/raw/brcmnand/
 
 BROADCOM SYSTEMPORT ETHERNET DRIVER
 M:	Florian Fainelli <f.fainelli@gmail.com>
@@ -3629,8 +3639,8 @@
 BT87X AUDIO DRIVER
 M:	Clemens Ladisch <clemens@ladisch.de>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
 F:	Documentation/sound/cards/bt87x.rst
 F:	sound/pci/bt87x.c
 
@@ -3645,10 +3655,10 @@
 M:	Josef Bacik <josef@toxicpanda.com>
 M:	David Sterba <dsterba@suse.com>
 L:	linux-btrfs@vger.kernel.org
+S:	Maintained
 W:	http://btrfs.wiki.kernel.org/
 Q:	http://patchwork.kernel.org/project/linux-btrfs/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs.git
-S:	Maintained
 F:	Documentation/filesystems/btrfs.rst
 F:	fs/btrfs/
 F:	include/linux/btrfs*
@@ -3657,9 +3667,9 @@
 BTTV VIDEO4LINUX DRIVER
 M:	Mauro Carvalho Chehab <mchehab@kernel.org>
 L:	linux-media@vger.kernel.org
+S:	Odd fixes
 W:	https://linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
-S:	Odd fixes
 F:	Documentation/media/v4l-drivers/bttv*
 F:	drivers/media/pci/bt8xx/bttv*
 
@@ -3667,10 +3677,10 @@
 M:	Chanwoo Choi <cw00.choi@samsung.com>
 L:	linux-pm@vger.kernel.org
 L:	linux-samsung-soc@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux.git
 S:	Maintained
-F:	drivers/devfreq/exynos-bus.c
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux.git
 F:	Documentation/devicetree/bindings/devfreq/exynos-bus.txt
+F:	drivers/devfreq/exynos-bus.c
 
 BUSLOGIC SCSI DRIVER
 M:	Khalid Aziz <khalid@gonehiking.org>
@@ -3682,40 +3692,40 @@
 C-MEDIA CMI8788 DRIVER
 M:	Clemens Ladisch <clemens@ladisch.de>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
 F:	sound/pci/oxygen/
 
 C-SKY ARCHITECTURE
 M:	Guo Ren <guoren@kernel.org>
 L:	linux-csky@vger.kernel.org
-T:	git https://github.com/c-sky/csky-linux.git
 S:	Supported
-F:	arch/csky/
+T:	git https://github.com/c-sky/csky-linux.git
 F:	Documentation/devicetree/bindings/csky/
-F:	drivers/irqchip/irq-csky-*
 F:	Documentation/devicetree/bindings/interrupt-controller/csky,*
+F:	Documentation/devicetree/bindings/timer/csky,*
+F:	arch/csky/
 F:	drivers/clocksource/timer-gx6605s.c
 F:	drivers/clocksource/timer-mp-csky.c
-F:	Documentation/devicetree/bindings/timer/csky,*
-K:	csky
+F:	drivers/irqchip/irq-csky-*
 N:	csky
+K:	csky
 
 C6X ARCHITECTURE
 M:	Mark Salter <msalter@redhat.com>
 M:	Aurelien Jacquiot <jacquiot.aurelien@gmail.com>
 L:	linux-c6x-dev@linux-c6x.org
-W:	http://www.linux-c6x.org/wiki/index.php/Main_Page
 S:	Maintained
+W:	http://www.linux-c6x.org/wiki/index.php/Main_Page
 F:	arch/c6x/
 
 CA8210 IEEE-802.15.4 RADIO DRIVER
 M:	Harry Morris <h.morris@cascoda.com>
 L:	linux-wpan@vger.kernel.org
-W:	https://github.com/Cascoda/ca8210-linux.git
 S:	Maintained
-F:	drivers/net/ieee802154/ca8210.c
+W:	https://github.com/Cascoda/ca8210-linux.git
 F:	Documentation/devicetree/bindings/net/ieee802154/ca8210.txt
+F:	drivers/net/ieee802154/ca8210.c
 
 CACHEFILES: FS-CACHE BACKEND FOR CACHING ON MOUNTED FILESYSTEMS
 M:	David Howells <dhowells@redhat.com>
@@ -3735,22 +3745,22 @@
 M:	Piotr Sroka <piotrs@cadence.com>
 L:	linux-mtd@lists.infradead.org
 S:	Maintained
-F:	drivers/mtd/nand/raw/cadence-nand-controller.c
 F:	Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt
+F:	drivers/mtd/nand/raw/cadence-nand-controller.c
 
 CADET FM/AM RADIO RECEIVER DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
-W:	https://linuxtv.org
 S:	Maintained
+W:	https://linuxtv.org
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/radio/radio-cadet*
 
 CAFE CMOS INTEGRATED CAMERA CONTROLLER DRIVER
 M:	Jonathan Corbet <corbet@lwn.net>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/media/v4l-drivers/cafe_ccic*
 F:	drivers/media/platform/marvell-ccic/
 
@@ -3759,8 +3769,8 @@
 S:	Orphan
 F:	Documentation/networking/caif/
 F:	drivers/net/caif/
-F:	include/uapi/linux/caif/
 F:	include/net/caif/
+F:	include/uapi/linux/caif/
 F:	net/caif/
 
 CAKE QDISC
@@ -3773,16 +3783,16 @@
 M:	Wolfgang Grandegger <wg@grandegger.com>
 M:	Marc Kleine-Budde <mkl@pengutronix.de>
 L:	linux-can@vger.kernel.org
+S:	Maintained
 W:	https://github.com/linux-can
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git
-S:	Maintained
 F:	Documentation/devicetree/bindings/net/can/
 F:	drivers/net/can/
 F:	include/linux/can/dev.h
 F:	include/linux/can/led.h
-F:	include/linux/can/rx-offload.h
 F:	include/linux/can/platform/
+F:	include/linux/can/rx-offload.h
 F:	include/uapi/linux/can/error.h
 F:	include/uapi/linux/can/netlink.h
 F:	include/uapi/linux/can/vxcan.h
@@ -3791,19 +3801,19 @@
 M:	Oliver Hartkopp <socketcan@hartkopp.net>
 M:	Marc Kleine-Budde <mkl@pengutronix.de>
 L:	linux-can@vger.kernel.org
+S:	Maintained
 W:	https://github.com/linux-can
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git
-S:	Maintained
 F:	Documentation/networking/can.rst
-F:	net/can/
 F:	include/linux/can/core.h
 F:	include/linux/can/skb.h
 F:	include/net/netns/can.h
 F:	include/uapi/linux/can.h
 F:	include/uapi/linux/can/bcm.h
-F:	include/uapi/linux/can/raw.h
 F:	include/uapi/linux/can/gw.h
+F:	include/uapi/linux/can/raw.h
+F:	net/can/
 
 CAN-J1939 NETWORK LAYER
 M:	Robin van der Gracht <robin@protonic.nl>
@@ -3812,8 +3822,8 @@
 L:	linux-can@vger.kernel.org
 S:	Maintained
 F:	Documentation/networking/j1939.rst
-F:	net/can/j1939/
 F:	include/uapi/linux/can/j1939.h
+F:	net/can/j1939/
 
 CAPABILITIES
 M:	Serge Hallyn <serge@hallyn.com>
@@ -3821,8 +3831,8 @@
 S:	Supported
 F:	include/linux/capability.h
 F:	include/uapi/linux/capability.h
-F:	security/commoncap.c
 F:	kernel/capability.c
+F:	security/commoncap.c
 
 CAPELLA MICROSYSTEMS LIGHT SENSOR DRIVER
 M:	Kevin Tsai <ktsai@capellamicro.com>
@@ -3832,14 +3842,14 @@
 CARL9170 LINUX COMMUNITY WIRELESS DRIVER
 M:	Christian Lamparter <chunkeey@googlemail.com>
 L:	linux-wireless@vger.kernel.org
-W:	http://wireless.kernel.org/en/users/Drivers/carl9170
 S:	Maintained
+W:	http://wireless.kernel.org/en/users/Drivers/carl9170
 F:	drivers/net/wireless/ath/carl9170/
 
 CAVIUM I2C DRIVER
 M:	Robert Richter <rrichter@marvell.com>
-W:	http://www.marvell.com
 S:	Supported
+W:	http://www.marvell.com
 F:	drivers/i2c/busses/i2c-octeon*
 F:	drivers/i2c/busses/i2c-thunderx*
 
@@ -3848,76 +3858,76 @@
 M:	Satanand Burla <sburla@marvell.com>
 M:	Felix Manlunas <fmanlunas@marvell.com>
 L:	netdev@vger.kernel.org
-W:	http://www.marvell.com
 S:	Supported
+W:	http://www.marvell.com
 F:	drivers/net/ethernet/cavium/liquidio/
 
 CAVIUM MMC DRIVER
 M:	Robert Richter <rrichter@marvell.com>
-W:	http://www.marvell.com
 S:	Supported
+W:	http://www.marvell.com
 F:	drivers/mmc/host/cavium*
 
 CAVIUM OCTEON-TX CRYPTO DRIVER
 M:	George Cherian <gcherian@marvell.com>
 L:	linux-crypto@vger.kernel.org
-W:	http://www.marvell.com
 S:	Supported
+W:	http://www.marvell.com
 F:	drivers/crypto/cavium/cpt/
 
 CAVIUM THUNDERX2 ARM64 SOC
 M:	Robert Richter <rrichter@marvell.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-F:	arch/arm64/boot/dts/cavium/thunder2-99xx*
 F:	Documentation/devicetree/bindings/arm/cavium-thunder2.txt
+F:	arch/arm64/boot/dts/cavium/thunder2-99xx*
 
 CC2520 IEEE-802.15.4 RADIO DRIVER
 M:	Varka Bhadram <varkabhadram@gmail.com>
 L:	linux-wpan@vger.kernel.org
 S:	Maintained
+F:	Documentation/devicetree/bindings/net/ieee802154/cc2520.txt
 F:	drivers/net/ieee802154/cc2520.c
 F:	include/linux/spi/cc2520.h
-F:	Documentation/devicetree/bindings/net/ieee802154/cc2520.txt
 
 CCREE ARM TRUSTZONE CRYPTOCELL REE DRIVER
 M:	Gilad Ben-Yossef <gilad@benyossef.com>
 L:	linux-crypto@vger.kernel.org
 S:	Supported
-F:	drivers/crypto/ccree/
 W:	https://developer.arm.com/products/system-ip/trustzone-cryptocell/cryptocell-700-family
+F:	drivers/crypto/ccree/
 
 CEC FRAMEWORK
 M:	Hans Verkuil <hverkuil-cisco@xs4all.nl>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
-W:	http://linuxtv.org
 S:	Supported
+W:	http://linuxtv.org
+T:	git git://linuxtv.org/media_tree.git
+F:	Documentation/ABI/testing/debugfs-cec-error-inj
+F:	Documentation/devicetree/bindings/media/cec.txt
 F:	Documentation/media/kapi/cec-core.rst
 F:	Documentation/media/uapi/cec
 F:	drivers/media/cec/
 F:	drivers/media/rc/keymaps/rc-cec.c
-F:	include/media/cec.h
 F:	include/media/cec-notifier.h
-F:	include/uapi/linux/cec.h
+F:	include/media/cec.h
 F:	include/uapi/linux/cec-funcs.h
-F:	Documentation/devicetree/bindings/media/cec.txt
-F:	Documentation/ABI/testing/debugfs-cec-error-inj
+F:	include/uapi/linux/cec.h
 
 CEC GPIO DRIVER
 M:	Hans Verkuil <hverkuil-cisco@xs4all.nl>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
-W:	http://linuxtv.org
 S:	Supported
-F:	drivers/media/platform/cec-gpio/
+W:	http://linuxtv.org
+T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/devicetree/bindings/media/cec-gpio.txt
+F:	drivers/media/platform/cec-gpio/
 
 CELL BROADBAND ENGINE ARCHITECTURE
 M:	Arnd Bergmann <arnd@arndb.de>
 L:	linuxppc-dev@lists.ozlabs.org
-W:	http://www.ibm.com/developerworks/power/cell/
 S:	Supported
+W:	http://www.ibm.com/developerworks/power/cell/
 F:	arch/powerpc/include/asm/cell*.h
 F:	arch/powerpc/include/asm/spu*.h
 F:	arch/powerpc/include/uapi/asm/spu*.h
@@ -3929,23 +3939,23 @@
 M:	Jeff Layton <jlayton@kernel.org>
 M:	Sage Weil <sage@redhat.com>
 L:	ceph-devel@vger.kernel.org
+S:	Supported
 W:	http://ceph.com/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client.git
 T:	git git://github.com/ceph/ceph-client.git
-S:	Supported
-F:	net/ceph/
 F:	include/linux/ceph/
 F:	include/linux/crush/
+F:	net/ceph/
 
 CEPH DISTRIBUTED FILE SYSTEM CLIENT (CEPH)
 M:	Jeff Layton <jlayton@kernel.org>
 M:	Sage Weil <sage@redhat.com>
 M:	Ilya Dryomov <idryomov@gmail.com>
 L:	ceph-devel@vger.kernel.org
+S:	Supported
 W:	http://ceph.com/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client.git
 T:	git git://github.com/ceph/ceph-client.git
-S:	Supported
 F:	Documentation/filesystems/ceph.rst
 F:	fs/ceph/
 
@@ -3956,8 +3966,8 @@
 S:	Maintained
 F:	Documentation/admin-guide/module-signing.rst
 F:	certs/
-F:	scripts/sign-file.c
 F:	scripts/extract-cert.c
+F:	scripts/sign-file.c
 
 CFAG12864B LCD DRIVER
 M:	Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>
@@ -3971,28 +3981,11 @@
 F:	drivers/auxdisplay/cfag12864bfb.c
 F:	include/linux/cfag12864b.h
 
-802.11 (including CFG80211/NL80211)
-M:	Johannes Berg <johannes@sipsolutions.net>
-L:	linux-wireless@vger.kernel.org
-W:	http://wireless.kernel.org/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
-S:	Maintained
-F:	net/wireless/
-F:	include/uapi/linux/nl80211.h
-F:	include/linux/ieee80211.h
-F:	include/net/wext.h
-F:	include/net/cfg80211.h
-F:	include/net/iw_handler.h
-F:	include/net/ieee80211_radiotap.h
-F:	Documentation/driver-api/80211/cfg80211.rst
-F:	Documentation/networking/regulatory.txt
-
 CHAR and MISC DRIVERS
 M:	Arnd Bergmann <arnd@arndb.de>
 M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
 S:	Supported
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
 F:	drivers/char/
 F:	drivers/misc/
 F:	include/linux/miscdevice.h
@@ -4012,9 +4005,9 @@
 
 CHIPIDEA USB HIGH SPEED DUAL ROLE CONTROLLER
 M:	Peter Chen <Peter.Chen@nxp.com>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb.git
 L:	linux-usb@vger.kernel.org
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb.git
 F:	drivers/usb/chipidea/
 
 CHIPONE ICN8318 I2C TOUCHSCREEN DRIVER
@@ -4037,26 +4030,26 @@
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux.git
 F:	drivers/platform/chrome/
 
+CHROMEOS EC CODEC DRIVER
+M:	Cheng-Yi Chiang <cychiang@chromium.org>
+R:	Enric Balletbo i Serra <enric.balletbo@collabora.com>
+R:	Guenter Roeck <groeck@chromium.org>
+S:	Maintained
+F:	Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml
+F:	sound/soc/codecs/cros_ec_codec.*
+
 CHROMEOS EC SUBDRIVERS
 M:	Benson Leung <bleung@chromium.org>
 M:	Enric Balletbo i Serra <enric.balletbo@collabora.com>
 R:	Guenter Roeck <groeck@chromium.org>
 S:	Maintained
+F:	drivers/power/supply/cros_usbpd-charger.c
 N:	cros_ec
 N:	cros-ec
-F:	drivers/power/supply/cros_usbpd-charger.c
-
-CHROMEOS EC CODEC DRIVER
-M:	Cheng-Yi Chiang <cychiang@chromium.org>
-S:	Maintained
-R:	Enric Balletbo i Serra <enric.balletbo@collabora.com>
-R:	Guenter Roeck <groeck@chromium.org>
-F:	Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml
-F:	sound/soc/codecs/cros_ec_codec.*
 
 CIRRUS LOGIC AUDIO CODEC DRIVERS
-M:	Brian Austin <brian.austin@cirrus.com>
-M:	Paul Handrigan <Paul.Handrigan@cirrus.com>
+M:	James Schulman <james.schulman@cirrus.com>
+M:	David Rhodes <david.rhodes@cirrus.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 S:	Maintained
 F:	sound/soc/codecs/cs*
@@ -4072,22 +4065,45 @@
 M:	Richard Fitzgerald <rf@opensource.cirrus.com>
 L:	patches@opensource.cirrus.com
 S:	Supported
+F:	Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt
+F:	Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.txt
+F:	Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt
+F:	Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.txt
+F:	Documentation/devicetree/bindings/regulator/cirrus,lochnagar.txt
+F:	Documentation/devicetree/bindings/sound/cirrus,lochnagar.txt
+F:	Documentation/hwmon/lochnagar.rst
 F:	drivers/clk/clk-lochnagar.c
 F:	drivers/hwmon/lochnagar-hwmon.c
 F:	drivers/mfd/lochnagar-i2c.c
 F:	drivers/pinctrl/cirrus/pinctrl-lochnagar.c
 F:	drivers/regulator/lochnagar-regulator.c
-F:	sound/soc/codecs/lochnagar-sc.c
 F:	include/dt-bindings/clk/lochnagar.h
 F:	include/dt-bindings/pinctrl/lochnagar.h
 F:	include/linux/mfd/lochnagar*
-F:	Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt
-F:	Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt
-F:	Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.txt
-F:	Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.txt
-F:	Documentation/devicetree/bindings/regulator/cirrus,lochnagar.txt
-F:	Documentation/devicetree/bindings/sound/cirrus,lochnagar.txt
-F:	Documentation/hwmon/lochnagar.rst
+F:	sound/soc/codecs/lochnagar-sc.c
+
+CIRRUS LOGIC MADERA CODEC DRIVERS
+M:	Charles Keepax <ckeepax@opensource.cirrus.com>
+M:	Richard Fitzgerald <rf@opensource.cirrus.com>
+L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
+L:	patches@opensource.cirrus.com
+S:	Supported
+W:	https://github.com/CirrusLogic/linux-drivers/wiki
+T:	git https://github.com/CirrusLogic/linux-drivers.git
+F:	Documentation/devicetree/bindings/mfd/madera.txt
+F:	Documentation/devicetree/bindings/pinctrl/cirrus,madera-pinctrl.txt
+F:	Documentation/devicetree/bindings/sound/madera.txt
+F:	drivers/gpio/gpio-madera*
+F:	drivers/irqchip/irq-madera*
+F:	drivers/mfd/cs47l*
+F:	drivers/mfd/madera*
+F:	drivers/pinctrl/cirrus/*
+F:	include/dt-bindings/sound/madera*
+F:	include/linux/irqchip/irq-madera*
+F:	include/linux/mfd/madera/*
+F:	include/sound/madera*
+F:	sound/soc/codecs/cs47l*
+F:	sound/soc/codecs/madera*
 
 CISCO FCOE HBA DRIVER
 M:	Satish Kharat <satishkh@cisco.com>
@@ -4117,29 +4133,6 @@
 S:	Supported
 F:	drivers/infiniband/hw/usnic/
 
-CIRRUS LOGIC MADERA CODEC DRIVERS
-M:	Charles Keepax <ckeepax@opensource.cirrus.com>
-M:	Richard Fitzgerald <rf@opensource.cirrus.com>
-L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
-L:	patches@opensource.cirrus.com
-T:	git https://github.com/CirrusLogic/linux-drivers.git
-W:	https://github.com/CirrusLogic/linux-drivers/wiki
-S:	Supported
-F:	Documentation/devicetree/bindings/mfd/madera.txt
-F:	Documentation/devicetree/bindings/pinctrl/cirrus,madera-pinctrl.txt
-F:	Documentation/devicetree/bindings/sound/madera.txt
-F:	include/dt-bindings/sound/madera*
-F:	include/linux/irqchip/irq-madera*
-F:	include/linux/mfd/madera/*
-F:	include/sound/madera*
-F:	drivers/gpio/gpio-madera*
-F:	drivers/irqchip/irq-madera*
-F:	drivers/mfd/madera*
-F:	drivers/mfd/cs47l*
-F:	drivers/pinctrl/cirrus/*
-F:	sound/soc/codecs/cs47l*
-F:	sound/soc/codecs/madera*
-
 CLANG-FORMAT FILE
 M:	Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
 S:	Maintained
@@ -4147,19 +4140,19 @@
 
 CLANG/LLVM BUILD SUPPORT
 L:	clang-built-linux@googlegroups.com
+S:	Supported
 W:	https://clangbuiltlinux.github.io/
 B:	https://github.com/ClangBuiltLinux/linux/issues
 C:	irc://chat.freenode.net/clangbuiltlinux
-S:	Supported
-K:	\b(?i:clang|llvm)\b
 F:	Documentation/kbuild/llvm.rst
+K:	\b(?i:clang|llvm)\b
 
 CLEANCACHE API
 M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
-F:	mm/cleancache.c
 F:	include/linux/cleancache.h
+F:	mm/cleancache.c
 
 CLK API
 M:	Russell King <linux@armlinux.org.uk>
@@ -4171,10 +4164,10 @@
 M:	Daniel Lezcano <daniel.lezcano@linaro.org>
 M:	Thomas Gleixner <tglx@linutronix.de>
 L:	linux-kernel@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core
 S:	Supported
-F:	drivers/clocksource/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core
 F:	Documentation/devicetree/bindings/timer/
+F:	drivers/clocksource/
 
 CMPC ACPI DRIVER
 M:	Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
@@ -4186,9 +4179,9 @@
 COBALT MEDIA DRIVER
 M:	Hans Verkuil <hverkuil-cisco@xs4all.nl>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
-W:	https://linuxtv.org
 S:	Supported
+W:	https://linuxtv.org
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/pci/cobalt/
 
 COCCINELLE/Semantic Patches (SmPL)
@@ -4197,19 +4190,19 @@
 M:	Nicolas Palix <nicolas.palix@imag.fr>
 M:	Michal Marek <michal.lkml@markovi.net>
 L:	cocci@systeme.lip6.fr (moderated for non-subscribers)
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild.git misc
-W:	http://coccinelle.lip6.fr/
 S:	Supported
+W:	http://coccinelle.lip6.fr/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild.git misc
 F:	Documentation/dev-tools/coccinelle.rst
-F:	scripts/coccinelle/
 F:	scripts/coccicheck
+F:	scripts/coccinelle/
 
 CODA FILE SYSTEM
 M:	Jan Harkes <jaharkes@cs.cmu.edu>
 M:	coda@cs.cmu.edu
 L:	codalist@coda.cs.cmu.edu
-W:	http://www.coda.cs.cmu.edu/
 S:	Maintained
+W:	http://www.coda.cs.cmu.edu/
 F:	Documentation/filesystems/coda.txt
 F:	fs/coda/
 F:	include/linux/coda*.h
@@ -4225,30 +4218,30 @@
 CODE OF CONDUCT
 M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 S:	Supported
-F:	Documentation/process/code-of-conduct.rst
 F:	Documentation/process/code-of-conduct-interpretation.rst
+F:	Documentation/process/code-of-conduct.rst
 
 COMMON CLK FRAMEWORK
 M:	Michael Turquette <mturquette@baylibre.com>
 M:	Stephen Boyd <sboyd@kernel.org>
 L:	linux-clk@vger.kernel.org
+S:	Maintained
 Q:	http://patchwork.kernel.org/project/linux-clk/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git
-S:	Maintained
 F:	Documentation/devicetree/bindings/clock/
 F:	drivers/clk/
-X:	drivers/clk/clkdev.c
 F:	include/linux/clk-pr*
 F:	include/linux/clk/
 F:	include/linux/of_clk.h
+X:	drivers/clk/clkdev.c
 
 COMMON INTERNET FILE SYSTEM (CIFS)
 M:	Steve French <sfrench@samba.org>
 L:	linux-cifs@vger.kernel.org
 L:	samba-technical@lists.samba.org (moderated for non-subscribers)
+S:	Supported
 W:	http://linux-cifs.samba.org/
 T:	git git://git.samba.org/sfrench/cifs-2.6.git
-S:	Supported
 F:	Documentation/admin-guide/cifs/
 F:	fs/cifs/
 
@@ -4283,15 +4276,15 @@
 
 CONEXANT ACCESSRUNNER USB DRIVER
 L:	accessrunner-general@lists.sourceforge.net
-W:	http://accessrunner.sourceforge.net/
 S:	Orphan
+W:	http://accessrunner.sourceforge.net/
 F:	drivers/usb/atm/cxacru.c
 
 CONFIGFS
 M:	Joel Becker <jlbec@evilplan.org>
 M:	Christoph Hellwig <hch@lst.de>
-T:	git git://git.infradead.org/users/hch/configfs.git
 S:	Supported
+T:	git git://git.infradead.org/users/hch/configfs.git
 F:	fs/configfs/
 F:	include/linux/configfs.h
 
@@ -4306,20 +4299,33 @@
 M:	Li Zefan <lizefan@huawei.com>
 M:	Johannes Weiner <hannes@cmpxchg.org>
 L:	cgroups@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup.git
 S:	Maintained
-F:	Documentation/admin-guide/cgroup-v2.rst
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup.git
 F:	Documentation/admin-guide/cgroup-v1/
+F:	Documentation/admin-guide/cgroup-v2.rst
 F:	include/linux/cgroup*
 F:	kernel/cgroup/
 
+CONTROL GROUP - BLOCK IO CONTROLLER (BLKIO)
+M:	Tejun Heo <tj@kernel.org>
+M:	Jens Axboe <axboe@kernel.dk>
+L:	cgroups@vger.kernel.org
+L:	linux-block@vger.kernel.org
+T:	git git://git.kernel.dk/linux-block
+F:	Documentation/admin-guide/cgroup-v1/blkio-controller.rst
+F:	block/bfq-cgroup.c
+F:	block/blk-cgroup.c
+F:	block/blk-iolatency.c
+F:	block/blk-throttle.c
+F:	include/linux/blk-cgroup.h
+
 CONTROL GROUP - CPUSET
 M:	Li Zefan <lizefan@huawei.com>
 L:	cgroups@vger.kernel.org
+S:	Maintained
 W:	http://www.bullopensource.org/cpuset/
 W:	http://oss.sgi.com/projects/cpusets/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup.git
-S:	Maintained
 F:	Documentation/admin-guide/cgroup-v1/cpusets.rst
 F:	include/linux/cpuset.h
 F:	kernel/cgroup/cpuset.c
@@ -4334,19 +4340,6 @@
 F:	mm/memcontrol.c
 F:	mm/swap_cgroup.c
 
-CONTROL GROUP - BLOCK IO CONTROLLER (BLKIO)
-M:	Tejun Heo <tj@kernel.org>
-M:	Jens Axboe <axboe@kernel.dk>
-L:	cgroups@vger.kernel.org
-L:	linux-block@vger.kernel.org
-T:	git git://git.kernel.dk/linux-block
-F:	Documentation/admin-guide/cgroup-v1/blkio-controller.rst
-F:	block/blk-cgroup.c
-F:	include/linux/blk-cgroup.h
-F:	block/blk-throttle.c
-F:	block/blk-iolatency.c
-F:	block/bfq-cgroup.c
-
 CORETEMP HARDWARE MONITORING DRIVER
 M:	Fenghua Yu <fenghua.yu@intel.com>
 L:	linux-hwmon@vger.kernel.org
@@ -4356,8 +4349,8 @@
 
 COSA/SRP SYNC SERIAL DRIVER
 M:	Jan "Yenya" Kasprzak <kas@fi.muni.cz>
-W:	http://www.fi.muni.cz/~kas/cosa/
 S:	Maintained
+W:	http://www.fi.muni.cz/~kas/cosa/
 F:	drivers/net/wan/cosa*
 
 COUNTER SUBSYSTEM
@@ -4376,31 +4369,43 @@
 S:	Maintained
 F:	drivers/net/ethernet/ti/cpmac.c
 
+CPU FREQUENCY DRIVERS - VEXPRESS SPC ARM BIG LITTLE
+M:	Viresh Kumar <viresh.kumar@linaro.org>
+M:	Sudeep Holla <sudeep.holla@arm.com>
+L:	linux-pm@vger.kernel.org
+S:	Maintained
+W:	http://www.arm.com/products/processors/technologies/biglittleprocessing.php
+F:	drivers/cpufreq/vexpress-spc-cpufreq.c
+
 CPU FREQUENCY SCALING FRAMEWORK
 M:	"Rafael J. Wysocki" <rjw@rjwysocki.net>
 M:	Viresh Kumar <viresh.kumar@linaro.org>
 L:	linux-pm@vger.kernel.org
 S:	Maintained
+B:	https://bugzilla.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm.git (For ARM Updates)
-B:	https://bugzilla.kernel.org
 F:	Documentation/admin-guide/pm/cpufreq.rst
 F:	Documentation/admin-guide/pm/intel_pstate.rst
 F:	Documentation/cpu-freq/
 F:	Documentation/devicetree/bindings/cpufreq/
 F:	drivers/cpufreq/
-F:	kernel/sched/cpufreq*.c
 F:	include/linux/cpufreq.h
 F:	include/linux/sched/cpufreq.h
+F:	kernel/sched/cpufreq*.c
 F:	tools/testing/selftests/cpufreq/
 
-CPU FREQUENCY DRIVERS - VEXPRESS SPC ARM BIG LITTLE
-M:	Viresh Kumar <viresh.kumar@linaro.org>
-M:	Sudeep Holla <sudeep.holla@arm.com>
+CPU IDLE TIME MANAGEMENT FRAMEWORK
+M:	"Rafael J. Wysocki" <rjw@rjwysocki.net>
+M:	Daniel Lezcano <daniel.lezcano@linaro.org>
 L:	linux-pm@vger.kernel.org
-W:	http://www.arm.com/products/processors/technologies/biglittleprocessing.php
 S:	Maintained
-F:	drivers/cpufreq/vexpress-spc-cpufreq.c
+B:	https://bugzilla.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git
+F:	Documentation/admin-guide/pm/cpuidle.rst
+F:	Documentation/driver-api/pm/cpuidle.rst
+F:	drivers/cpuidle/*
+F:	include/linux/cpuidle.h
 
 CPU POWER MONITORING SUBSYSTEM
 M:	Thomas Renninger <trenn@suse.com>
@@ -4421,8 +4426,8 @@
 M:	Daniel Lezcano <daniel.lezcano@linaro.org>
 L:	linux-pm@vger.kernel.org
 L:	linux-arm-kernel@lists.infradead.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git
 F:	drivers/cpuidle/cpuidle-big_little.c
 
 CPUIDLE DRIVER - ARM EXYNOS
@@ -4432,8 +4437,8 @@
 L:	linux-pm@vger.kernel.org
 L:	linux-samsung-soc@vger.kernel.org
 S:	Supported
-F:	drivers/cpuidle/cpuidle-exynos.c
 F:	arch/arm/mach-exynos/pm.c
+F:	drivers/cpuidle/cpuidle-exynos.c
 
 CPUIDLE DRIVER - ARM PSCI
 M:	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
@@ -4443,18 +4448,6 @@
 S:	Supported
 F:	drivers/cpuidle/cpuidle-psci.c
 
-CPU IDLE TIME MANAGEMENT FRAMEWORK
-M:	"Rafael J. Wysocki" <rjw@rjwysocki.net>
-M:	Daniel Lezcano <daniel.lezcano@linaro.org>
-L:	linux-pm@vger.kernel.org
-S:	Maintained
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git
-B:	https://bugzilla.kernel.org
-F:	Documentation/admin-guide/pm/cpuidle.rst
-F:	Documentation/driver-api/pm/cpuidle.rst
-F:	drivers/cpuidle/*
-F:	include/linux/cpuidle.h
-
 CRAMFS FILESYSTEM
 M:	Nicolas Pitre <nico@fluxnic.net>
 S:	Maintained
@@ -4471,9 +4464,9 @@
 M:	Herbert Xu <herbert@gondor.apana.org.au>
 M:	"David S. Miller" <davem@davemloft.net>
 L:	linux-crypto@vger.kernel.org
+S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6.git
-S:	Maintained
 F:	Documentation/crypto/
 F:	Documentation/devicetree/bindings/crypto/
 F:	arch/*/crypto/
@@ -4493,9 +4486,9 @@
 CS3308 MEDIA DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
-W:	http://linuxtv.org
 S:	Odd Fixes
+W:	http://linuxtv.org
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/i2c/cs3308.c
 
 CS5535 Audio ALSA driver
@@ -4506,10 +4499,10 @@
 CSI DRIVERS FOR ALLWINNER V3s
 M:	Yong Deng <yong.deng@magewell.com>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
-F:	drivers/media/platform/sunxi/sun6i-csi/
+T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml
+F:	drivers/media/platform/sunxi/sun6i-csi/
 
 CW1200 WLAN driver
 M:	Solomon Peachy <pizza@shaftnet.org>
@@ -4519,18 +4512,18 @@
 CX18 VIDEO4LINUX DRIVER
 M:	Andy Walls <awalls@md.metrocast.net>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
-W:	https://linuxtv.org
 S:	Maintained
+W:	https://linuxtv.org
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/pci/cx18/
 F:	include/uapi/linux/ivtv*
 
 CX2341X MPEG ENCODER HELPER MODULE
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
-W:	https://linuxtv.org
 S:	Maintained
+W:	https://linuxtv.org
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/common/cx2341x*
 F:	include/media/drv-intf/cx2341x.h
 
@@ -4538,42 +4531,42 @@
 M:	Jemma Denson <jdenson@gmail.com>
 M:	Patrick Boettcher <patrick.boettcher@posteo.de>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
-S:	Maintained
 F:	drivers/media/dvb-frontends/cx24120*
 
 CX88 VIDEO4LINUX DRIVER
 M:	Mauro Carvalho Chehab <mchehab@kernel.org>
 L:	linux-media@vger.kernel.org
+S:	Odd fixes
 W:	https://linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
-S:	Odd fixes
 F:	Documentation/media/v4l-drivers/cx88*
 F:	drivers/media/pci/cx88/
 
 CXD2820R MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
-S:	Maintained
 F:	drivers/media/dvb-frontends/cxd2820r*
 
 CXGB3 ETHERNET DRIVER (CXGB3)
 M:	Vishal Kulkarni <vishal@chelsio.com>
 L:	netdev@vger.kernel.org
-W:	http://www.chelsio.com
 S:	Supported
+W:	http://www.chelsio.com
 F:	drivers/net/ethernet/chelsio/cxgb3/
 
 CXGB3 ISCSI DRIVER (CXGB3I)
 M:	Karen Xie <kxie@chelsio.com>
 L:	linux-scsi@vger.kernel.org
-W:	http://www.chelsio.com
 S:	Supported
+W:	http://www.chelsio.com
 F:	drivers/scsi/cxgbi/cxgb3i
 
 CXGB4 CRYPTO DRIVER (chcr)
@@ -4581,37 +4574,37 @@
 M:	Vinay Kumar Yadav <vinay.yadav@chelsio.com>
 M:	Rohit Maheshwari <rohitm@chelsio.com>
 L:	linux-crypto@vger.kernel.org
-W:	http://www.chelsio.com
 S:	Supported
+W:	http://www.chelsio.com
 F:	drivers/crypto/chelsio
 
 CXGB4 ETHERNET DRIVER (CXGB4)
 M:	Vishal Kulkarni <vishal@chelsio.com>
 L:	netdev@vger.kernel.org
-W:	http://www.chelsio.com
 S:	Supported
+W:	http://www.chelsio.com
 F:	drivers/net/ethernet/chelsio/cxgb4/
 
 CXGB4 ISCSI DRIVER (CXGB4I)
 M:	Karen Xie <kxie@chelsio.com>
 L:	linux-scsi@vger.kernel.org
-W:	http://www.chelsio.com
 S:	Supported
+W:	http://www.chelsio.com
 F:	drivers/scsi/cxgbi/cxgb4i
 
 CXGB4 IWARP RNIC DRIVER (IW_CXGB4)
 M:	Potnuri Bharat Teja <bharat@chelsio.com>
 L:	linux-rdma@vger.kernel.org
-W:	http://www.openfabrics.org
 S:	Supported
+W:	http://www.openfabrics.org
 F:	drivers/infiniband/hw/cxgb4/
 F:	include/uapi/rdma/cxgb4-abi.h
 
 CXGB4VF ETHERNET DRIVER (CXGB4VF)
 M:	Vishal Kulkarni <vishal@gmail.com>
 L:	netdev@vger.kernel.org
-W:	http://www.chelsio.com
 S:	Supported
+W:	http://www.chelsio.com
 F:	drivers/net/ethernet/chelsio/cxgb4vf/
 
 CXL (IBM Coherent Accelerator Processor Interface CAPI) DRIVER
@@ -4619,12 +4612,12 @@
 M:	Andrew Donnellan <ajd@linux.ibm.com>
 L:	linuxppc-dev@lists.ozlabs.org
 S:	Supported
+F:	Documentation/ABI/testing/sysfs-class-cxl
+F:	Documentation/powerpc/cxl.rst
 F:	arch/powerpc/platforms/powernv/pci-cxl.c
 F:	drivers/misc/cxl/
 F:	include/misc/cxl*
 F:	include/uapi/misc/cxl.h
-F:	Documentation/powerpc/cxl.rst
-F:	Documentation/ABI/testing/sysfs-class-cxl
 
 CXLFLASH (IBM Coherent Accelerator Processor Interface CAPI Flash) SCSI DRIVER
 M:	Manoj N. Kumar <manoj@linux.ibm.com>
@@ -4632,37 +4625,37 @@
 M:	Uma Krishnan <ukrishn@linux.ibm.com>
 L:	linux-scsi@vger.kernel.org
 S:	Supported
+F:	Documentation/powerpc/cxlflash.rst
 F:	drivers/scsi/cxlflash/
 F:	include/uapi/scsi/cxlflash_ioctl.h
-F:	Documentation/powerpc/cxlflash.rst
 
 CYBERPRO FB DRIVER
 M:	Russell King <linux@armlinux.org.uk>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W:	http://www.armlinux.org.uk/
 S:	Maintained
+W:	http://www.armlinux.org.uk/
 F:	drivers/video/fbdev/cyber2000fb.*
 
 CYCLADES ASYNC MUX DRIVER
-W:	http://www.cyclades.com/
 S:	Orphan
+W:	http://www.cyclades.com/
 F:	drivers/tty/cyclades.c
 F:	include/linux/cyclades.h
 F:	include/uapi/linux/cyclades.h
 
 CYCLADES PC300 DRIVER
-W:	http://www.cyclades.com/
 S:	Orphan
+W:	http://www.cyclades.com/
 F:	drivers/net/wan/pc300*
 
 CYPRESS_FIRMWARE MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
-S:	Maintained
 F:	drivers/media/common/cypress_firmware*
 
 CYTTSP TOUCHSCREEN DRIVER
@@ -4686,10 +4679,10 @@
 
 DAMA SLAVE for AX.25
 M:	Joerg Reuter <jreuter@yaina.de>
-W:	http://yaina.de/jreuter/
-W:	http://www.qsl.net/dl1bke/
 L:	linux-hams@vger.kernel.org
 S:	Maintained
+W:	http://yaina.de/jreuter/
+W:	http://www.qsl.net/dl1bke/
 F:	net/ax25/af_ax25.c
 F:	net/ax25/ax25_dev.c
 F:	net/ax25/ax25_ds_*
@@ -4715,34 +4708,34 @@
 M:	Ali Akcaagac <aliakc@web.de>
 M:	Jamie Lenehan <lenehan@twibble.org>
 L:	dc395x@twibble.org
+S:	Maintained
 W:	http://twibble.org/dist/dc395x/
 W:	http://lists.twibble.org/mailman/listinfo/dc395x/
-S:	Maintained
-F:	Documentation/scsi/dc395x.txt
+F:	Documentation/scsi/dc395x.rst
 F:	drivers/scsi/dc395x.*
 
 DCCP PROTOCOL
 M:	Gerrit Renker <gerrit@erg.abdn.ac.uk>
 L:	dccp@vger.kernel.org
-W:	http://www.linuxfoundation.org/collaborate/workgroups/networking/dccp
 S:	Maintained
+W:	http://www.linuxfoundation.org/collaborate/workgroups/networking/dccp
 F:	include/linux/dccp.h
-F:	include/uapi/linux/dccp.h
 F:	include/linux/tfrc.h
+F:	include/uapi/linux/dccp.h
 F:	net/dccp/
 
 DECnet NETWORK LAYER
-W:	http://linux-decnet.sourceforge.net
 L:	linux-decnet-user@lists.sourceforge.net
 S:	Orphan
+W:	http://linux-decnet.sourceforge.net
 F:	Documentation/networking/decnet.txt
 F:	net/decnet/
 
 DECSTATION PLATFORM SUPPORT
 M:	"Maciej W. Rozycki" <macro@linux-mips.org>
 L:	linux-mips@vger.kernel.org
-W:	http://www.linux-mips.org/wiki/DECstation
 S:	Maintained
+W:	http://www.linux-mips.org/wiki/DECstation
 F:	arch/mips/dec/
 F:	arch/mips/include/asm/dec/
 F:	arch/mips/include/asm/mach-dec/
@@ -4752,38 +4745,38 @@
 S:	Maintained
 F:	drivers/net/fddi/defxx.*
 
-DEINTERLACE DRIVERS FOR ALLWINNER H3
-M:	Jernej Skrabec <jernej.skrabec@siol.net>
-L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
-S:	Maintained
-F:	drivers/media/platform/sunxi/sun8i-di/
-F:	Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml
-
 DEFZA FDDI NETWORK DRIVER
 M:	"Maciej W. Rozycki" <macro@linux-mips.org>
 S:	Maintained
 F:	drivers/net/fddi/defza.*
 
+DEINTERLACE DRIVERS FOR ALLWINNER H3
+M:	Jernej Skrabec <jernej.skrabec@siol.net>
+L:	linux-media@vger.kernel.org
+S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
+F:	Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml
+F:	drivers/media/platform/sunxi/sun8i-di/
+
 DELL LAPTOP DRIVER
 M:	Matthew Garrett <mjg59@srcf.ucam.org>
-M:	Pali Rohár <pali.rohar@gmail.com>
+M:	Pali Rohár <pali@kernel.org>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
 F:	drivers/platform/x86/dell-laptop.c
 
 DELL LAPTOP FREEFALL DRIVER
-M:	Pali Rohár <pali.rohar@gmail.com>
+M:	Pali Rohár <pali@kernel.org>
 S:	Maintained
 F:	drivers/platform/x86/dell-smo8800.c
 
 DELL LAPTOP RBTN DRIVER
-M:	Pali Rohár <pali.rohar@gmail.com>
+M:	Pali Rohár <pali@kernel.org>
 S:	Maintained
 F:	drivers/platform/x86/dell-rbtn.*
 
 DELL LAPTOP SMM DRIVER
-M:	Pali Rohár <pali.rohar@gmail.com>
+M:	Pali Rohár <pali@kernel.org>
 S:	Maintained
 F:	drivers/hwmon/dell-smm-hwmon.c
 F:	include/uapi/linux/i8k.h
@@ -4795,7 +4788,7 @@
 F:	drivers/platform/x86/dell_rbu.c
 
 DELL SMBIOS DRIVER
-M:	Pali Rohár <pali.rohar@gmail.com>
+M:	Pali Rohár <pali@kernel.org>
 M:	Mario Limonciello <mario.limonciello@dell.com>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
@@ -4828,16 +4821,16 @@
 
 DELL WMI NOTIFICATIONS DRIVER
 M:	Matthew Garrett <mjg59@srcf.ucam.org>
-M:	Pali Rohár <pali.rohar@gmail.com>
+M:	Pali Rohár <pali@kernel.org>
 S:	Maintained
 F:	drivers/platform/x86/dell-wmi.c
 
 DELTA ST MEDIA DRIVER
 M:	Hugues Fruchet <hugues.fruchet@st.com>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
-W:	https://linuxtv.org
 S:	Supported
+W:	https://linuxtv.org
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/platform/sti/delta
 
 DENALI NAND DRIVER
@@ -4856,15 +4849,15 @@
 DESIGNWARE USB2 DRD IP DRIVER
 M:	Minas Harutyunyan <hminas@synopsys.com>
 L:	linux-usb@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
 F:	drivers/usb/dwc2/
 
 DESIGNWARE USB3 DRD IP DRIVER
 M:	Felipe Balbi <balbi@kernel.org>
 L:	linux-usb@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
 F:	drivers/usb/dwc3/
 
 DEVANTECH SRF ULTRASONIC RANGER IIO DRIVER
@@ -4881,47 +4874,55 @@
 F:	drivers/base/devcoredump.c
 F:	include/linux/devcoredump.h
 
+DEVICE DIRECT ACCESS (DAX)
+M:	Dan Williams <dan.j.williams@intel.com>
+M:	Vishal Verma <vishal.l.verma@intel.com>
+M:	Dave Jiang <dave.jiang@intel.com>
+L:	linux-nvdimm@lists.01.org
+S:	Supported
+F:	drivers/dax/
+
 DEVICE FREQUENCY (DEVFREQ)
 M:	MyungJoo Ham <myungjoo.ham@samsung.com>
 M:	Kyungmin Park <kyungmin.park@samsung.com>
 M:	Chanwoo Choi <cw00.choi@samsung.com>
 L:	linux-pm@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux.git
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux.git
+F:	Documentation/devicetree/bindings/devfreq/
 F:	drivers/devfreq/
 F:	include/linux/devfreq.h
-F:	Documentation/devicetree/bindings/devfreq/
 F:	include/trace/events/devfreq.h
 
 DEVICE FREQUENCY EVENT (DEVFREQ-EVENT)
 M:	Chanwoo Choi <cw00.choi@samsung.com>
 L:	linux-pm@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux.git
 S:	Supported
-F:	drivers/devfreq/event/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux.git
+F:	Documentation/devicetree/bindings/devfreq/event/
 F:	drivers/devfreq/devfreq-event.c
+F:	drivers/devfreq/event/
 F:	include/dt-bindings/pmu/exynos_ppmu.h
 F:	include/linux/devfreq-event.h
-F:	Documentation/devicetree/bindings/devfreq/event/
 
 DEVICE NUMBER REGISTRY
 M:	Torben Mathiasen <device@lanana.org>
-W:	http://lanana.org/docs/device-list/index.html
 S:	Maintained
+W:	http://lanana.org/docs/device-list/index.html
 
 DEVICE-MAPPER  (LVM)
 M:	Alasdair Kergon <agk@redhat.com>
 M:	Mike Snitzer <snitzer@redhat.com>
 M:	dm-devel@redhat.com
 L:	dm-devel@redhat.com
+S:	Maintained
 W:	http://sources.redhat.com/dm
 Q:	http://patchwork.kernel.org/project/dm-devel/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm.git
 T:	quilt http://people.redhat.com/agk/patches/linux/editing/
-S:	Maintained
 F:	Documentation/admin-guide/device-mapper/
-F:	drivers/md/Makefile
 F:	drivers/md/Kconfig
+F:	drivers/md/Makefile
 F:	drivers/md/dm*
 F:	drivers/md/persistent-data/
 F:	include/linux/device-mapper.h
@@ -4932,23 +4933,23 @@
 M:	Jiri Pirko <jiri@mellanox.com>
 L:	netdev@vger.kernel.org
 S:	Supported
-F:	net/core/devlink.c
+F:	Documentation/networking/devlink
 F:	include/net/devlink.h
 F:	include/uapi/linux/devlink.h
-F:	Documentation/networking/devlink
+F:	net/core/devlink.c
 
 DIALOG SEMICONDUCTOR DRIVERS
 M:	Support Opensource <support.opensource@diasemi.com>
-W:	http://www.dialog-semiconductor.com/products
 S:	Supported
-F:	Documentation/hwmon/da90??.rst
-F:	Documentation/devicetree/bindings/mfd/da90*.txt
+W:	http://www.dialog-semiconductor.com/products
 F:	Documentation/devicetree/bindings/input/da90??-onkey.txt
-F:	Documentation/devicetree/bindings/thermal/da90??-thermal.txt
+F:	Documentation/devicetree/bindings/mfd/da90*.txt
 F:	Documentation/devicetree/bindings/regulator/da92*.txt
 F:	Documentation/devicetree/bindings/regulator/slg51000.txt
-F:	Documentation/devicetree/bindings/watchdog/da90??-wdt.txt
 F:	Documentation/devicetree/bindings/sound/da[79]*.txt
+F:	Documentation/devicetree/bindings/thermal/da90??-thermal.txt
+F:	Documentation/devicetree/bindings/watchdog/da90??-wdt.txt
+F:	Documentation/hwmon/da90??.rst
 F:	drivers/gpio/gpio-da90??.c
 F:	drivers/hwmon/da90??-hwmon.c
 F:	drivers/iio/adc/da91??-*.c
@@ -4958,13 +4959,14 @@
 F:	drivers/mfd/da903x.c
 F:	drivers/mfd/da90??-*.c
 F:	drivers/mfd/da91??-*.c
+F:	drivers/pinctrl/pinctrl-da90??.c
 F:	drivers/power/supply/da9052-battery.c
 F:	drivers/power/supply/da91??-*.c
 F:	drivers/regulator/da903x.c
 F:	drivers/regulator/da9???-regulator.[ch]
 F:	drivers/regulator/slg51000-regulator.[ch]
-F:	drivers/thermal/da90??-thermal.c
 F:	drivers/rtc/rtc-da90??.c
+F:	drivers/thermal/da90??-thermal.c
 F:	drivers/video/backlight/da90??_bl.c
 F:	drivers/watchdog/da90??_wdt.c
 F:	include/linux/mfd/da903x.h
@@ -4989,25 +4991,6 @@
 S:	Maintained
 F:	drivers/i2c/busses/i2c-diolan-u2c.c
 
-FILESYSTEM DIRECT ACCESS (DAX)
-M:	Dan Williams <dan.j.williams@intel.com>
-R:	Matthew Wilcox <willy@infradead.org>
-R:	Jan Kara <jack@suse.cz>
-L:	linux-fsdevel@vger.kernel.org
-L:	linux-nvdimm@lists.01.org
-S:	Supported
-F:	fs/dax.c
-F:	include/linux/dax.h
-F:	include/trace/events/fs_dax.h
-
-DEVICE DIRECT ACCESS (DAX)
-M:	Dan Williams <dan.j.williams@intel.com>
-M:	Vishal Verma <vishal.l.verma@intel.com>
-M:	Dave Jiang <dave.jiang@intel.com>
-L:	linux-nvdimm@lists.01.org
-S:	Supported
-F:	drivers/dax/
-
 DIRECTORY NOTIFICATION (DNOTIFY)
 M:	Jan Kara <jack@suse.cz>
 R:	Amir Goldstein <amir73il@gmail.com>
@@ -5019,10 +5002,10 @@
 
 DISK GEOMETRY AND PARTITION HANDLING
 M:	Andries Brouwer <aeb@cwi.nl>
+S:	Maintained
 W:	http://www.win.tue.nl/~aeb/linux/Large-Disk.html
 W:	http://www.win.tue.nl/~aeb/linux/zip/zip-1.html
 W:	http://www.win.tue.nl/~aeb/partitions/partition_types-1.html
-S:	Maintained
 
 DISKQUOTA
 M:	Jan Kara <jack@suse.com>
@@ -5037,32 +5020,58 @@
 L:	linux-fbdev@vger.kernel.org
 S:	Maintained
 W:	http://plugable.com/category/projects/udlfb/
+F:	Documentation/fb/udlfb.rst
 F:	drivers/video/fbdev/udlfb.c
 F:	include/video/udlfb.h
-F:	Documentation/fb/udlfb.rst
 
 DISTRIBUTED LOCK MANAGER (DLM)
 M:	Christine Caulfield <ccaulfie@redhat.com>
 M:	David Teigland <teigland@redhat.com>
 L:	cluster-devel@redhat.com
+S:	Supported
 W:	http://sources.redhat.com/cluster/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm.git
-S:	Supported
 F:	fs/dlm/
 
 DMA BUFFER SHARING FRAMEWORK
 M:	Sumit Semwal <sumit.semwal@linaro.org>
-S:	Maintained
 L:	linux-media@vger.kernel.org
 L:	dri-devel@lists.freedesktop.org
 L:	linaro-mm-sig@lists.linaro.org (moderated for non-subscribers)
+S:	Maintained
+T:	git git://anongit.freedesktop.org/drm/drm-misc
+F:	Documentation/driver-api/dma-buf.rst
 F:	drivers/dma-buf/
+F:	include/linux/*fence.h
 F:	include/linux/dma-buf*
 F:	include/linux/dma-resv.h
-F:	include/linux/*fence.h
-F:	Documentation/driver-api/dma-buf.rst
 K:	dma_(buf|fence|resv)
-T:	git git://anongit.freedesktop.org/drm/drm-misc
+
+DMA GENERIC OFFLOAD ENGINE SUBSYSTEM
+M:	Vinod Koul <vkoul@kernel.org>
+L:	dmaengine@vger.kernel.org
+S:	Maintained
+Q:	https://patchwork.kernel.org/project/linux-dmaengine/list/
+T:	git git://git.infradead.org/users/vkoul/slave-dma.git
+F:	Documentation/devicetree/bindings/dma/
+F:	Documentation/driver-api/dmaengine/
+F:	drivers/dma/
+F:	include/linux/dmaengine.h
+F:	include/linux/of_dma.h
+
+DMA MAPPING HELPERS
+M:	Christoph Hellwig <hch@lst.de>
+M:	Marek Szyprowski <m.szyprowski@samsung.com>
+R:	Robin Murphy <robin.murphy@arm.com>
+L:	iommu@lists.linux-foundation.org
+S:	Supported
+W:	http://git.infradead.org/users/hch/dma-mapping.git
+T:	git git://git.infradead.org/users/hch/dma-mapping.git
+F:	include/asm-generic/dma-mapping.h
+F:	include/linux/dma-direct.h
+F:	include/linux/dma-mapping.h
+F:	include/linux/dma-noncoherent.h
+F:	kernel/dma/
 
 DMA-BUF HEAPS FRAMEWORK
 M:	Sumit Semwal <sumit.semwal@linaro.org>
@@ -5072,49 +5081,23 @@
 R:	Laura Abbott <labbott@redhat.com>
 R:	Brian Starkey <Brian.Starkey@arm.com>
 R:	John Stultz <john.stultz@linaro.org>
-S:	Maintained
 L:	linux-media@vger.kernel.org
 L:	dri-devel@lists.freedesktop.org
 L:	linaro-mm-sig@lists.linaro.org (moderated for non-subscribers)
-F:	include/uapi/linux/dma-heap.h
-F:	include/linux/dma-heap.h
+S:	Maintained
+T:	git git://anongit.freedesktop.org/drm/drm-misc
 F:	drivers/dma-buf/dma-heap.c
 F:	drivers/dma-buf/heaps/*
-T:	git git://anongit.freedesktop.org/drm/drm-misc
-
-DMA GENERIC OFFLOAD ENGINE SUBSYSTEM
-M:	Vinod Koul <vkoul@kernel.org>
-L:	dmaengine@vger.kernel.org
-Q:	https://patchwork.kernel.org/project/linux-dmaengine/list/
-S:	Maintained
-F:	drivers/dma/
-F:	include/linux/dmaengine.h
-F:	include/linux/of_dma.h
-F:	Documentation/devicetree/bindings/dma/
-F:	Documentation/driver-api/dmaengine/
-T:	git git://git.infradead.org/users/vkoul/slave-dma.git
-
-DMA MAPPING HELPERS
-M:	Christoph Hellwig <hch@lst.de>
-M:	Marek Szyprowski <m.szyprowski@samsung.com>
-R:	Robin Murphy <robin.murphy@arm.com>
-L:	iommu@lists.linux-foundation.org
-T:	git git://git.infradead.org/users/hch/dma-mapping.git
-W:	http://git.infradead.org/users/hch/dma-mapping.git
-S:	Supported
-F:	kernel/dma/
-F:	include/asm-generic/dma-mapping.h
-F:	include/linux/dma-direct.h
-F:	include/linux/dma-mapping.h
-F:	include/linux/dma-noncoherent.h
+F:	include/linux/dma-heap.h
+F:	include/uapi/linux/dma-heap.h
 
 DMC FREQUENCY DRIVER FOR SAMSUNG EXYNOS5422
 M:	Lukasz Luba <lukasz.luba@arm.com>
 L:	linux-pm@vger.kernel.org
 L:	linux-samsung-soc@vger.kernel.org
 S:	Maintained
-F:	drivers/memory/samsung/exynos5422-dmc.c
 F:	Documentation/devicetree/bindings/memory-controllers/exynos5422-dmc.txt
+F:	drivers/memory/samsung/exynos5422-dmc.c
 
 DME1737 HARDWARE MONITOR DRIVER
 M:	Juerg Haefliger <juergh@gmail.com>
@@ -5136,18 +5119,26 @@
 M:	Jonathan Corbet <corbet@lwn.net>
 L:	linux-doc@vger.kernel.org
 S:	Maintained
+T:	git git://git.lwn.net/linux.git docs-next
 F:	Documentation/
 F:	scripts/documentation-file-ref-check
 F:	scripts/kernel-doc
 F:	scripts/sphinx-pre-install
 X:	Documentation/ABI/
-X:	Documentation/firmware-guide/acpi/
 X:	Documentation/devicetree/
+X:	Documentation/firmware-guide/acpi/
 X:	Documentation/i2c/
 X:	Documentation/media/
 X:	Documentation/power/
 X:	Documentation/spi/
-T:	git git://git.lwn.net/linux.git docs-next
+
+DOCUMENTATION SCRIPTS
+M:	Mauro Carvalho Chehab <mchehab@kernel.org>
+L:	linux-doc@vger.kernel.org
+S:	Maintained
+F:	Documentation/sphinx/parse-headers.pl
+F:	scripts/documentation-file-ref-check
+F:	scripts/sphinx-pre-install
 
 DOCUMENTATION/ITALIAN
 M:	Federico Vaga <federico.vaga@vaga.pv.it>
@@ -5155,29 +5146,21 @@
 S:	Maintained
 F:	Documentation/translations/it_IT
 
-DOCUMENTATION SCRIPTS
-M:	Mauro Carvalho Chehab <mchehab@kernel.org>
-L:	linux-doc@vger.kernel.org
-S:	Maintained
-F:	scripts/documentation-file-ref-check
-F:	scripts/sphinx-pre-install
-F:	Documentation/sphinx/parse-headers.pl
-
 DONGWOON DW9714 LENS VOICE COIL DRIVER
 M:	Sakari Ailus <sakari.ailus@linux.intel.com>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
-F:	drivers/media/i2c/dw9714.c
+T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.txt
+F:	drivers/media/i2c/dw9714.c
 
 DONGWOON DW9807 LENS VOICE COIL DRIVER
 M:	Sakari Ailus <sakari.ailus@linux.intel.com>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
-F:	drivers/media/i2c/dw9807-vcm.c
+T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.txt
+F:	drivers/media/i2c/dw9807-vcm.c
 
 DOUBLETALK DRIVER
 M:	"James R. Van Zandt" <jrv@vanzandt.mv.com>
@@ -5196,15 +5179,15 @@
 M:	Ioana Radulescu <ruxandra.radulescu@nxp.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/ethernet/freescale/dpaa2/dpaa2-eth*
-F:	drivers/net/ethernet/freescale/dpaa2/dpaa2-mac*
-F:	drivers/net/ethernet/freescale/dpaa2/dpni*
-F:	drivers/net/ethernet/freescale/dpaa2/dpmac*
-F:	drivers/net/ethernet/freescale/dpaa2/dpkg.h
-F:	drivers/net/ethernet/freescale/dpaa2/Makefile
-F:	drivers/net/ethernet/freescale/dpaa2/Kconfig
 F:	Documentation/networking/device_drivers/freescale/dpaa2/ethernet-driver.rst
 F:	Documentation/networking/device_drivers/freescale/dpaa2/mac-phy-support.rst
+F:	drivers/net/ethernet/freescale/dpaa2/Kconfig
+F:	drivers/net/ethernet/freescale/dpaa2/Makefile
+F:	drivers/net/ethernet/freescale/dpaa2/dpaa2-eth*
+F:	drivers/net/ethernet/freescale/dpaa2/dpaa2-mac*
+F:	drivers/net/ethernet/freescale/dpaa2/dpkg.h
+F:	drivers/net/ethernet/freescale/dpaa2/dpmac*
+F:	drivers/net/ethernet/freescale/dpaa2/dpni*
 
 DPAA2 ETHERNET SWITCH DRIVER
 M:	Ioana Radulescu <ruxandra.radulescu@nxp.com>
@@ -5216,8 +5199,8 @@
 DPT_I2O SCSI RAID DRIVER
 M:	Adaptec OEM Raid Solutions <aacraid@microsemi.com>
 L:	linux-scsi@vger.kernel.org
-W:	http://www.adaptec.com/
 S:	Maintained
+W:	http://www.adaptec.com/
 F:	drivers/scsi/dpt*
 F:	drivers/scsi/dpt/
 
@@ -5225,19 +5208,19 @@
 M:	Philipp Reisner <philipp.reisner@linbit.com>
 M:	Lars Ellenberg <lars.ellenberg@linbit.com>
 L:	drbd-dev@lists.linbit.com
+S:	Supported
 W:	http://www.drbd.org
 T:	git git://git.linbit.com/linux-drbd.git
 T:	git git://git.linbit.com/drbd-8.4.git
-S:	Supported
+F:	Documentation/admin-guide/blockdev/
 F:	drivers/block/drbd/
 F:	lib/lru_cache.c
-F:	Documentation/admin-guide/blockdev/
 
 DRIVER CORE, KOBJECTS, DEBUGFS AND SYSFS
 M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 R:	"Rafael J. Wysocki" <rafael@kernel.org>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core.git
 S:	Supported
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core.git
 F:	Documentation/core-api/kobject.rst
 F:	drivers/base/
 F:	fs/debugfs/
@@ -5249,94 +5232,103 @@
 DRIVERS FOR ADAPTIVE VOLTAGE SCALING (AVS)
 M:	Kevin Hilman <khilman@kernel.org>
 M:	Nishanth Menon <nm@ti.com>
+L:	linux-pm@vger.kernel.org
 S:	Maintained
 F:	drivers/power/avs/
 F:	include/linux/power/smartreflex.h
-L:	linux-pm@vger.kernel.org
+
+DRM DRIVER FOR ALLWINNER DE2 AND DE3 ENGINE
+M:	Maxime Ripard <mripard@kernel.org>
+M:	Chen-Yu Tsai <wens@csie.org>
+R:	Jernej Skrabec <jernej.skrabec@siol.net>
+L:	dri-devel@lists.freedesktop.org
+S:	Supported
+T:	git git://anongit.freedesktop.org/drm/drm-misc
+F:	drivers/gpu/drm/sun4i/sun8i*
 
 DRM DRIVER FOR ARM PL111 CLCD
 M:	Eric Anholt <eric@anholt.net>
-T:	git git://anongit.freedesktop.org/drm/drm-misc
 S:	Supported
+T:	git git://anongit.freedesktop.org/drm/drm-misc
 F:	drivers/gpu/drm/pl111/
 
 DRM DRIVER FOR ARM VERSATILE TFT PANELS
 M:	Linus Walleij <linus.walleij@linaro.org>
-T:	git git://anongit.freedesktop.org/drm/drm-misc
 S:	Maintained
-F:	drivers/gpu/drm/panel/panel-arm-versatile.c
+T:	git git://anongit.freedesktop.org/drm/drm-misc
 F:	Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.txt
+F:	drivers/gpu/drm/panel/panel-arm-versatile.c
+
+DRM DRIVER FOR ASPEED BMC GFX
+M:	Joel Stanley <joel@jms.id.au>
+L:	linux-aspeed@lists.ozlabs.org
+S:	Supported
+T:	git git://anongit.freedesktop.org/drm/drm-misc
+F:	Documentation/devicetree/bindings/gpu/aspeed-gfx.txt
+F:	drivers/gpu/drm/aspeed/
 
 DRM DRIVER FOR AST SERVER GRAPHICS CHIPS
 M:	Dave Airlie <airlied@redhat.com>
 S:	Odd Fixes
 F:	drivers/gpu/drm/ast/
 
-DRM DRIVER FOR ASPEED BMC GFX
-M:	Joel Stanley <joel@jms.id.au>
-L:	linux-aspeed@lists.ozlabs.org
-T:	git git://anongit.freedesktop.org/drm/drm-misc
-S:	Supported
-F:	drivers/gpu/drm/aspeed/
-F:	Documentation/devicetree/bindings/gpu/aspeed-gfx.txt
-
 DRM DRIVER FOR BOCHS VIRTUAL GPU
 M:	Gerd Hoffmann <kraxel@redhat.com>
 L:	virtualization@lists.linux-foundation.org
-T:	git git://anongit.freedesktop.org/drm/drm-misc
 S:	Maintained
+T:	git git://anongit.freedesktop.org/drm/drm-misc
 F:	drivers/gpu/drm/bochs/
 
 DRM DRIVER FOR BOE HIMAX8279D PANELS
 M:	Jerry Han <hanxu5@huaqin.corp-partner.google.com>
 S:	Maintained
-F:	drivers/gpu/drm/panel/panel-boe-himax8279d.c
 F:	Documentation/devicetree/bindings/display/panel/boe,himax8279d.txt
+F:	drivers/gpu/drm/panel/panel-boe-himax8279d.c
 
 DRM DRIVER FOR FARADAY TVE200 TV ENCODER
 M:	Linus Walleij <linus.walleij@linaro.org>
-T:	git git://anongit.freedesktop.org/drm/drm-misc
 S:	Maintained
+T:	git git://anongit.freedesktop.org/drm/drm-misc
 F:	drivers/gpu/drm/tve200/
 
 DRM DRIVER FOR FEIXIN K101 IM2BA02 MIPI-DSI LCD PANELS
 M:	Icenowy Zheng <icenowy@aosc.io>
 S:	Maintained
-F:	drivers/gpu/drm/panel/panel-feixin-k101-im2ba02.c
 F:	Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml
+F:	drivers/gpu/drm/panel/panel-feixin-k101-im2ba02.c
 
 DRM DRIVER FOR FEIYANG FY07024DI26A30-D MIPI-DSI LCD PANELS
 M:	Jagan Teki <jagan@amarulasolutions.com>
 S:	Maintained
-F:	drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c
 F:	Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.txt
+F:	drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c
 
 DRM DRIVER FOR GRAIN MEDIA GM12U320 PROJECTORS
 M:	Hans de Goede <hdegoede@redhat.com>
-T:	git git://anongit.freedesktop.org/drm/drm-misc
 S:	Maintained
+T:	git git://anongit.freedesktop.org/drm/drm-misc
 F:	drivers/gpu/drm/tiny/gm12u320.c
 
-DRM DRIVER FOR ILITEK ILI9225 PANELS
-M:	David Lechner <david@lechnology.com>
-T:	git git://anongit.freedesktop.org/drm/drm-misc
-S:	Maintained
-F:	drivers/gpu/drm/tiny/ili9225.c
-F:	Documentation/devicetree/bindings/display/ilitek,ili9225.txt
-
-DRM DRIVER FOR ILITEK ILI9486 PANELS
-M:	Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>
-T:	git git://anongit.freedesktop.org/drm/drm-misc
-S:	Maintained
-F:	drivers/gpu/drm/tiny/ili9486.c
-F:	Documentation/devicetree/bindings/display/ilitek,ili9486.yaml
-
 DRM DRIVER FOR HX8357D PANELS
 M:	Eric Anholt <eric@anholt.net>
-T:	git git://anongit.freedesktop.org/drm/drm-misc
 S:	Maintained
-F:	drivers/gpu/drm/tiny/hx8357d.c
+T:	git git://anongit.freedesktop.org/drm/drm-misc
 F:	Documentation/devicetree/bindings/display/himax,hx8357d.txt
+F:	drivers/gpu/drm/tiny/hx8357d.c
+
+DRM DRIVER FOR ILITEK ILI9225 PANELS
+M:	David Lechner <david@lechnology.com>
+S:	Maintained
+T:	git git://anongit.freedesktop.org/drm/drm-misc
+F:	Documentation/devicetree/bindings/display/ilitek,ili9225.txt
+F:	drivers/gpu/drm/tiny/ili9225.c
+
+DRM DRIVER FOR ILITEK ILI9486 PANELS
+M:	Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>
+S:	Maintained
+T:	git git://anongit.freedesktop.org/drm/drm-misc
+F:	Documentation/devicetree/bindings/display/ilitek,ili9486.yaml
+F:	drivers/gpu/drm/tiny/ili9486.c
 
 DRM DRIVER FOR INTEL I810 VIDEO CARDS
 S:	Orphan / Obsolete
@@ -5355,10 +5347,10 @@
 
 DRM DRIVER FOR MI0283QT
 M:	Noralf Trønnes <noralf@tronnes.org>
-T:	git git://anongit.freedesktop.org/drm/drm-misc
 S:	Maintained
-F:	drivers/gpu/drm/tiny/mi0283qt.c
+T:	git git://anongit.freedesktop.org/drm/drm-misc
 F:	Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt
+F:	drivers/gpu/drm/tiny/mi0283qt.c
 
 DRM DRIVER FOR MSM ADRENO GPU
 M:	Rob Clark <robdclark@gmail.com>
@@ -5366,48 +5358,48 @@
 L:	linux-arm-msm@vger.kernel.org
 L:	dri-devel@lists.freedesktop.org
 L:	freedreno@lists.freedesktop.org
-T:	git https://gitlab.freedesktop.org/drm/msm.git
 S:	Maintained
+T:	git https://gitlab.freedesktop.org/drm/msm.git
+F:	Documentation/devicetree/bindings/display/msm/
 F:	drivers/gpu/drm/msm/
 F:	include/uapi/drm/msm_drm.h
-F:	Documentation/devicetree/bindings/display/msm/
 
 DRM DRIVER FOR NOVATEK NT35510 PANELS
 M:	Linus Walleij <linus.walleij@linaro.org>
-T:	git git://anongit.freedesktop.org/drm/drm-misc
 S:	Maintained
-F:	drivers/gpu/drm/panel/panel-novatek-nt35510.c
+T:	git git://anongit.freedesktop.org/drm/drm-misc
 F:	Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml
+F:	drivers/gpu/drm/panel/panel-novatek-nt35510.c
 
 DRM DRIVER FOR NVIDIA GEFORCE/QUADRO GPUS
 M:	Ben Skeggs <bskeggs@redhat.com>
 L:	dri-devel@lists.freedesktop.org
 L:	nouveau@lists.freedesktop.org
-T:	git git://github.com/skeggsb/linux
 S:	Supported
+T:	git git://github.com/skeggsb/linux
 F:	drivers/gpu/drm/nouveau/
 F:	include/uapi/drm/nouveau_drm.h
 
 DRM DRIVER FOR OLIMEX LCD-OLINUXINO PANELS
 M:	Stefan Mavrodiev <stefan@olimex.com>
 S:	Maintained
-F:	drivers/gpu/drm/panel/panel-olimex-lcd-olinuxino.c
 F:	Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.txt
+F:	drivers/gpu/drm/panel/panel-olimex-lcd-olinuxino.c
 
 DRM DRIVER FOR PERVASIVE DISPLAYS REPAPER PANELS
 M:	Noralf Trønnes <noralf@tronnes.org>
-T:	git git://anongit.freedesktop.org/drm/drm-misc
 S:	Maintained
-F:	drivers/gpu/drm/tiny/repaper.c
+T:	git git://anongit.freedesktop.org/drm/drm-misc
 F:	Documentation/devicetree/bindings/display/repaper.txt
+F:	drivers/gpu/drm/tiny/repaper.c
 
 DRM DRIVER FOR QEMU'S CIRRUS DEVICE
 M:	Dave Airlie <airlied@redhat.com>
 M:	Gerd Hoffmann <kraxel@redhat.com>
 L:	virtualization@lists.linux-foundation.org
-T:	git git://anongit.freedesktop.org/drm/drm-misc
 S:	Obsolete
 W:	https://www.kraxel.org/blog/2014/10/qemu-using-cirrus-considered-harmful/
+T:	git git://anongit.freedesktop.org/drm/drm-misc
 F:	drivers/gpu/drm/cirrus/
 
 DRM DRIVER FOR QXL VIRTUAL GPU
@@ -5415,28 +5407,28 @@
 M:	Gerd Hoffmann <kraxel@redhat.com>
 L:	virtualization@lists.linux-foundation.org
 L:	spice-devel@lists.freedesktop.org
-T:	git git://anongit.freedesktop.org/drm/drm-misc
 S:	Maintained
+T:	git git://anongit.freedesktop.org/drm/drm-misc
 F:	drivers/gpu/drm/qxl/
 F:	include/uapi/drm/qxl_drm.h
 
-DRM DRIVER FOR RAYDIUM RM67191 PANELS
-M:	Robert Chiras <robert.chiras@nxp.com>
-S:	Maintained
-F:	drivers/gpu/drm/panel/panel-raydium-rm67191.c
-F:	Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt
-
 DRM DRIVER FOR RAGE 128 VIDEO CARDS
 S:	Orphan / Obsolete
 F:	drivers/gpu/drm/r128/
 F:	include/uapi/drm/r128_drm.h
 
+DRM DRIVER FOR RAYDIUM RM67191 PANELS
+M:	Robert Chiras <robert.chiras@nxp.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt
+F:	drivers/gpu/drm/panel/panel-raydium-rm67191.c
+
 DRM DRIVER FOR ROCKTECH JH057N00900 PANELS
 M:	Guido Günther <agx@sigxcpu.org>
 R:	Purism Kernel Team <kernel@puri.sm>
 S:	Maintained
-F:	drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c
 F:	Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt
+F:	drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c
 
 DRM DRIVER FOR SAVAGE VIDEO CARDS
 S:	Orphan / Obsolete
@@ -5448,38 +5440,38 @@
 F:	drivers/gpu/drm/sis/
 F:	include/uapi/drm/sis_drm.h
 
+DRM DRIVER FOR SITRONIX ST7586 PANELS
+M:	David Lechner <david@lechnology.com>
+S:	Maintained
+T:	git git://anongit.freedesktop.org/drm/drm-misc
+F:	Documentation/devicetree/bindings/display/sitronix,st7586.txt
+F:	drivers/gpu/drm/tiny/st7586.c
+
 DRM DRIVER FOR SITRONIX ST7701 PANELS
 M:	Jagan Teki <jagan@amarulasolutions.com>
 S:	Maintained
-F:	drivers/gpu/drm/panel/panel-sitronix-st7701.c
 F:	Documentation/devicetree/bindings/display/panel/sitronix,st7701.txt
-
-DRM DRIVER FOR SITRONIX ST7586 PANELS
-M:	David Lechner <david@lechnology.com>
-T:	git git://anongit.freedesktop.org/drm/drm-misc
-S:	Maintained
-F:	drivers/gpu/drm/tiny/st7586.c
-F:	Documentation/devicetree/bindings/display/sitronix,st7586.txt
+F:	drivers/gpu/drm/panel/panel-sitronix-st7701.c
 
 DRM DRIVER FOR SITRONIX ST7735R PANELS
 M:	David Lechner <david@lechnology.com>
-T:	git git://anongit.freedesktop.org/drm/drm-misc
 S:	Maintained
-F:	drivers/gpu/drm/tiny/st7735r.c
+T:	git git://anongit.freedesktop.org/drm/drm-misc
 F:	Documentation/devicetree/bindings/display/sitronix,st7735r.yaml
+F:	drivers/gpu/drm/tiny/st7735r.c
 
 DRM DRIVER FOR SONY ACX424AKP PANELS
 M:	Linus Walleij <linus.walleij@linaro.org>
-T:	git git://anongit.freedesktop.org/drm/drm-misc
 S:	Maintained
+T:	git git://anongit.freedesktop.org/drm/drm-misc
 F:	drivers/gpu/drm/panel/panel-sony-acx424akp.c
 
 DRM DRIVER FOR ST-ERICSSON MCDE
 M:	Linus Walleij <linus.walleij@linaro.org>
-T:	git git://anongit.freedesktop.org/drm/drm-misc
 S:	Maintained
-F:	drivers/gpu/drm/mcde/
+T:	git git://anongit.freedesktop.org/drm/drm-misc
 F:	Documentation/devicetree/bindings/display/ste,mcde.txt
+F:	drivers/gpu/drm/mcde/
 
 DRM DRIVER FOR TDFX VIDEO CARDS
 S:	Orphan / Obsolete
@@ -5487,42 +5479,42 @@
 
 DRM DRIVER FOR TPO TPG110 PANELS
 M:	Linus Walleij <linus.walleij@linaro.org>
-T:	git git://anongit.freedesktop.org/drm/drm-misc
 S:	Maintained
-F:	drivers/gpu/drm/panel/panel-tpo-tpg110.c
+T:	git git://anongit.freedesktop.org/drm/drm-misc
 F:	Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml
+F:	drivers/gpu/drm/panel/panel-tpo-tpg110.c
 
 DRM DRIVER FOR USB DISPLAYLINK VIDEO ADAPTERS
 M:	Dave Airlie <airlied@redhat.com>
 R:	Sean Paul <sean@poorly.run>
 L:	dri-devel@lists.freedesktop.org
 S:	Odd Fixes
+T:	git git://anongit.freedesktop.org/drm/drm-misc
 F:	drivers/gpu/drm/udl/
-T:	git git://anongit.freedesktop.org/drm/drm-misc
-
-DRM DRIVER FOR VIRTUALBOX VIRTUAL GPU
-M:	Hans de Goede <hdegoede@redhat.com>
-L:	dri-devel@lists.freedesktop.org
-S:	Maintained
-F:	drivers/gpu/drm/vboxvideo/
-T:	git git://anongit.freedesktop.org/drm/drm-misc
 
 DRM DRIVER FOR VIRTUAL KERNEL MODESETTING (VKMS)
 M:	Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
 R:	Haneen Mohammed <hamohammed.sa@gmail.com>
 R:	Daniel Vetter <daniel@ffwll.ch>
-T:	git git://anongit.freedesktop.org/drm/drm-misc
-S:	Maintained
 L:	dri-devel@lists.freedesktop.org
-F:	drivers/gpu/drm/vkms/
+S:	Maintained
+T:	git git://anongit.freedesktop.org/drm/drm-misc
 F:	Documentation/gpu/vkms.rst
+F:	drivers/gpu/drm/vkms/
+
+DRM DRIVER FOR VIRTUALBOX VIRTUAL GPU
+M:	Hans de Goede <hdegoede@redhat.com>
+L:	dri-devel@lists.freedesktop.org
+S:	Maintained
+T:	git git://anongit.freedesktop.org/drm/drm-misc
+F:	drivers/gpu/drm/vboxvideo/
 
 DRM DRIVER FOR VMWARE VIRTUAL GPU
 M:	"VMware Graphics" <linux-graphics-maintainer@vmware.com>
 M:	Thomas Hellstrom <thellstrom@vmware.com>
 L:	dri-devel@lists.freedesktop.org
-T:	git git://people.freedesktop.org/~thomash/linux
 S:	Supported
+T:	git git://people.freedesktop.org/~thomash/linux
 F:	drivers/gpu/drm/vmwgfx/
 F:	include/uapi/drm/vmwgfx_drm.h
 
@@ -5530,71 +5522,62 @@
 M:	David Airlie <airlied@linux.ie>
 M:	Daniel Vetter <daniel@ffwll.ch>
 L:	dri-devel@lists.freedesktop.org
-T:	git git://anongit.freedesktop.org/drm/drm
+S:	Maintained
 B:	https://bugs.freedesktop.org/
 C:	irc://chat.freenode.net/dri-devel
-S:	Maintained
-F:	drivers/gpu/drm/
-F:	drivers/gpu/vga/
+T:	git git://anongit.freedesktop.org/drm/drm
 F:	Documentation/devicetree/bindings/display/
 F:	Documentation/devicetree/bindings/gpu/
 F:	Documentation/gpu/
+F:	drivers/gpu/drm/
+F:	drivers/gpu/vga/
 F:	include/drm/
-F:	include/uapi/drm/
 F:	include/linux/vga*
+F:	include/uapi/drm/
 
 DRM DRIVERS AND MISC GPU PATCHES
 M:	Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
 M:	Maxime Ripard <mripard@kernel.org>
 M:	Thomas Zimmermann <tzimmermann@suse.de>
-W:	https://01.org/linuxgraphics/gfx-docs/maintainer-tools/drm-misc.html
 S:	Maintained
+W:	https://01.org/linuxgraphics/gfx-docs/maintainer-tools/drm-misc.html
 T:	git git://anongit.freedesktop.org/drm/drm-misc
 F:	Documentation/gpu/
-F:	drivers/gpu/vga/
 F:	drivers/gpu/drm/*
+F:	drivers/gpu/vga/
 F:	include/drm/drm*
-F:	include/uapi/drm/drm*
 F:	include/linux/vga*
+F:	include/uapi/drm/drm*
 
 DRM DRIVERS FOR ALLWINNER A10
 M:	Maxime Ripard <mripard@kernel.org>
 M:	Chen-Yu Tsai <wens@csie.org>
 L:	dri-devel@lists.freedesktop.org
 S:	Supported
+T:	git git://anongit.freedesktop.org/drm/drm-misc
+F:	Documentation/devicetree/bindings/display/allwinner*
 F:	drivers/gpu/drm/sun4i/
-F:	Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
-T:	git git://anongit.freedesktop.org/drm/drm-misc
-
-DRM DRIVER FOR ALLWINNER DE2 AND DE3 ENGINE
-M:	Maxime Ripard <mripard@kernel.org>
-M:	Chen-Yu Tsai <wens@csie.org>
-R:	Jernej Skrabec <jernej.skrabec@siol.net>
-L:	dri-devel@lists.freedesktop.org
-S:	Supported
-F:	drivers/gpu/drm/sun4i/sun8i*
-T:	git git://anongit.freedesktop.org/drm/drm-misc
 
 DRM DRIVERS FOR AMLOGIC SOCS
 M:	Neil Armstrong <narmstrong@baylibre.com>
 L:	dri-devel@lists.freedesktop.org
 L:	linux-amlogic@lists.infradead.org
-W:	http://linux-meson.com/
 S:	Supported
-F:	drivers/gpu/drm/meson/
-F:	Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
-F:	Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
-F:	Documentation/gpu/meson.rst
+W:	http://linux-meson.com/
 T:	git git://anongit.freedesktop.org/drm/drm-misc
+F:	Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
+F:	Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
+F:	Documentation/gpu/meson.rst
+F:	drivers/gpu/drm/meson/
 
 DRM DRIVERS FOR ATMEL HLCDC
 M:	Sam Ravnborg <sam@ravnborg.org>
 M:	Boris Brezillon <bbrezillon@kernel.org>
 L:	dri-devel@lists.freedesktop.org
 S:	Supported
-F:	drivers/gpu/drm/atmel-hlcdc/
-F:	Documentation/devicetree/bindings/display/atmel/
 T:	git git://anongit.freedesktop.org/drm/drm-misc
+F:	Documentation/devicetree/bindings/display/atmel/
+F:	drivers/gpu/drm/atmel-hlcdc/
 
 DRM DRIVERS FOR BRIDGE CHIPS
 M:	Andrzej Hajda <a.hajda@samsung.com>
@@ -5612,35 +5595,35 @@
 M:	Seung-Woo Kim <sw0312.kim@samsung.com>
 M:	Kyungmin Park <kyungmin.park@samsung.com>
 L:	dri-devel@lists.freedesktop.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos.git
 S:	Supported
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos.git
+F:	Documentation/devicetree/bindings/display/exynos/
 F:	drivers/gpu/drm/exynos/
 F:	include/uapi/drm/exynos_drm.h
-F:	Documentation/devicetree/bindings/display/exynos/
 
 DRM DRIVERS FOR FREESCALE DCU
 M:	Stefan Agner <stefan@agner.ch>
 M:	Alison Wang <alison.wang@nxp.com>
 L:	dri-devel@lists.freedesktop.org
 S:	Supported
-F:	drivers/gpu/drm/fsl-dcu/
+T:	git git://anongit.freedesktop.org/drm/drm-misc
 F:	Documentation/devicetree/bindings/display/fsl,dcu.txt
 F:	Documentation/devicetree/bindings/display/fsl,tcon.txt
-T:	git git://anongit.freedesktop.org/drm/drm-misc
+F:	drivers/gpu/drm/fsl-dcu/
 
 DRM DRIVERS FOR FREESCALE IMX
 M:	Philipp Zabel <p.zabel@pengutronix.de>
 L:	dri-devel@lists.freedesktop.org
 S:	Maintained
+F:	Documentation/devicetree/bindings/display/imx/
 F:	drivers/gpu/drm/imx/
 F:	drivers/gpu/ipu-v3/
-F:	Documentation/devicetree/bindings/display/imx/
 
 DRM DRIVERS FOR GMA500 (Poulsbo, Moorestown and derivative chipsets)
 M:	Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
 L:	dri-devel@lists.freedesktop.org
-T:	git git://github.com/patjak/drm-gma500
 S:	Maintained
+T:	git git://github.com/patjak/drm-gma500
 F:	drivers/gpu/drm/gma500/
 
 DRM DRIVERS FOR HISILICON
@@ -5650,71 +5633,71 @@
 R:	Xinwei Kong <kong.kongxinwei@hisilicon.com>
 R:	Chen Feng <puck.chen@hisilicon.com>
 L:	dri-devel@lists.freedesktop.org
-T:	git git://anongit.freedesktop.org/drm/drm-misc
 S:	Maintained
-F:	drivers/gpu/drm/hisilicon/
+T:	git git://anongit.freedesktop.org/drm/drm-misc
 F:	Documentation/devicetree/bindings/display/hisilicon/
+F:	drivers/gpu/drm/hisilicon/
 
 DRM DRIVERS FOR LIMA
 M:	Qiang Yu <yuq825@gmail.com>
 L:	dri-devel@lists.freedesktop.org
 L:	lima@lists.freedesktop.org (moderated for non-subscribers)
 S:	Maintained
+T:	git git://anongit.freedesktop.org/drm/drm-misc
 F:	drivers/gpu/drm/lima/
 F:	include/uapi/drm/lima_drm.h
-T:	git git://anongit.freedesktop.org/drm/drm-misc
 
 DRM DRIVERS FOR MEDIATEK
 M:	Chun-Kuang Hu <chunkuang.hu@kernel.org>
 M:	Philipp Zabel <p.zabel@pengutronix.de>
 L:	dri-devel@lists.freedesktop.org
 S:	Supported
-F:	drivers/gpu/drm/mediatek/
 F:	Documentation/devicetree/bindings/display/mediatek/
+F:	drivers/gpu/drm/mediatek/
 
 DRM DRIVERS FOR NVIDIA TEGRA
 M:	Thierry Reding <thierry.reding@gmail.com>
 L:	dri-devel@lists.freedesktop.org
 L:	linux-tegra@vger.kernel.org
-T:	git git://anongit.freedesktop.org/tegra/linux.git
 S:	Supported
+T:	git git://anongit.freedesktop.org/tegra/linux.git
+F:	Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
 F:	drivers/gpu/drm/tegra/
 F:	drivers/gpu/host1x/
 F:	include/linux/host1x.h
 F:	include/uapi/drm/tegra_drm.h
-F:	Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
 
 DRM DRIVERS FOR RENESAS
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 M:	Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
 L:	dri-devel@lists.freedesktop.org
 L:	linux-renesas-soc@vger.kernel.org
-T:	git git://linuxtv.org/pinchartl/media drm/du/next
 S:	Supported
-F:	drivers/gpu/drm/rcar-du/
-F:	drivers/gpu/drm/shmobile/
-F:	include/linux/platform_data/shmob_drm.h
+T:	git git://linuxtv.org/pinchartl/media drm/du/next
 F:	Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt
 F:	Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
 F:	Documentation/devicetree/bindings/display/renesas,du.txt
+F:	drivers/gpu/drm/rcar-du/
+F:	drivers/gpu/drm/shmobile/
+F:	include/linux/platform_data/shmob_drm.h
 
 DRM DRIVERS FOR ROCKCHIP
 M:	Sandy Huang <hjc@rock-chips.com>
 M:	Heiko Stübner <heiko@sntech.de>
 L:	dri-devel@lists.freedesktop.org
 S:	Maintained
-F:	drivers/gpu/drm/rockchip/
-F:	Documentation/devicetree/bindings/display/rockchip/
 T:	git git://anongit.freedesktop.org/drm/drm-misc
+F:	Documentation/devicetree/bindings/display/rockchip/
+F:	drivers/gpu/drm/rockchip/
 
 DRM DRIVERS FOR STI
 M:	Benjamin Gaignard <benjamin.gaignard@linaro.org>
 M:	Vincent Abriou <vincent.abriou@st.com>
 L:	dri-devel@lists.freedesktop.org
-T:	git git://anongit.freedesktop.org/drm/drm-misc
 S:	Maintained
-F:	drivers/gpu/drm/sti
+T:	git git://anongit.freedesktop.org/drm/drm-misc
 F:	Documentation/devicetree/bindings/display/st,stih4xx.txt
+F:	drivers/gpu/drm/sti
 
 DRM DRIVERS FOR STM
 M:	Yannick Fertre <yannick.fertre@st.com>
@@ -5722,53 +5705,53 @@
 M:	Benjamin Gaignard <benjamin.gaignard@linaro.org>
 M:	Vincent Abriou <vincent.abriou@st.com>
 L:	dri-devel@lists.freedesktop.org
+S:	Maintained
 T:	git git://anongit.freedesktop.org/drm/drm-misc
-S:	Maintained
-F:	drivers/gpu/drm/stm
 F:	Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
-
-DRM DRIVERS FOR TI LCDC
-M:	Jyri Sarha <jsarha@ti.com>
-R:	Tomi Valkeinen <tomi.valkeinen@ti.com>
-L:	dri-devel@lists.freedesktop.org
-S:	Maintained
-F:	drivers/gpu/drm/tilcdc/
-F:	Documentation/devicetree/bindings/display/tilcdc/
-
-DRM DRIVERS FOR TI OMAP
-M:	Tomi Valkeinen <tomi.valkeinen@ti.com>
-L:	dri-devel@lists.freedesktop.org
-S:	Maintained
-F:	drivers/gpu/drm/omapdrm/
-F:	Documentation/devicetree/bindings/display/ti/
+F:	drivers/gpu/drm/stm
 
 DRM DRIVERS FOR TI KEYSTONE
 M:	Jyri Sarha <jsarha@ti.com>
 M:	Tomi Valkeinen <tomi.valkeinen@ti.com>
 L:	dri-devel@lists.freedesktop.org
 S:	Maintained
-F:	drivers/gpu/drm/tidss/
-F:	Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml
+T:	git git://anongit.freedesktop.org/drm/drm-misc
 F:	Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
 F:	Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml
-T:	git git://anongit.freedesktop.org/drm/drm-misc
+F:	Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml
+F:	drivers/gpu/drm/tidss/
+
+DRM DRIVERS FOR TI LCDC
+M:	Jyri Sarha <jsarha@ti.com>
+R:	Tomi Valkeinen <tomi.valkeinen@ti.com>
+L:	dri-devel@lists.freedesktop.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/display/tilcdc/
+F:	drivers/gpu/drm/tilcdc/
+
+DRM DRIVERS FOR TI OMAP
+M:	Tomi Valkeinen <tomi.valkeinen@ti.com>
+L:	dri-devel@lists.freedesktop.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/display/ti/
+F:	drivers/gpu/drm/omapdrm/
 
 DRM DRIVERS FOR V3D
 M:	Eric Anholt <eric@anholt.net>
 S:	Supported
+T:	git git://anongit.freedesktop.org/drm/drm-misc
+F:	Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt
 F:	drivers/gpu/drm/v3d/
 F:	include/uapi/drm/v3d_drm.h
-F:	Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt
-T:	git git://anongit.freedesktop.org/drm/drm-misc
 
 DRM DRIVERS FOR VC4
 M:	Eric Anholt <eric@anholt.net>
-T:	git git://github.com/anholt/linux
 S:	Supported
+T:	git git://github.com/anholt/linux
+T:	git git://anongit.freedesktop.org/drm/drm-misc
+F:	Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt
 F:	drivers/gpu/drm/vc4/
 F:	include/uapi/drm/vc4_drm.h
-F:	Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt
-T:	git git://anongit.freedesktop.org/drm/drm-misc
 
 DRM DRIVERS FOR VIVANTE GPU IP
 M:	Lucas Stach <l.stach@pengutronix.de>
@@ -5777,183 +5760,184 @@
 L:	etnaviv@lists.freedesktop.org (moderated for non-subscribers)
 L:	dri-devel@lists.freedesktop.org
 S:	Maintained
+F:	Documentation/devicetree/bindings/gpu/vivante,gc.yaml
 F:	drivers/gpu/drm/etnaviv/
 F:	include/uapi/drm/etnaviv_drm.h
-F:	Documentation/devicetree/bindings/display/etnaviv/
+
+DRM DRIVERS FOR XEN
+M:	Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
+L:	dri-devel@lists.freedesktop.org
+L:	xen-devel@lists.xenproject.org (moderated for non-subscribers)
+S:	Supported
+T:	git git://anongit.freedesktop.org/drm/drm-misc
+F:	Documentation/gpu/xen-front.rst
+F:	drivers/gpu/drm/xen/
 
 DRM DRIVERS FOR ZTE ZX
 M:	Shawn Guo <shawnguo@kernel.org>
 L:	dri-devel@lists.freedesktop.org
 S:	Maintained
-F:	drivers/gpu/drm/zte/
-F:	Documentation/devicetree/bindings/display/zte,vou.txt
 T:	git git://anongit.freedesktop.org/drm/drm-misc
+F:	Documentation/devicetree/bindings/display/zte,vou.txt
+F:	drivers/gpu/drm/zte/
 
 DRM PANEL DRIVERS
 M:	Thierry Reding <thierry.reding@gmail.com>
 R:	Sam Ravnborg <sam@ravnborg.org>
 L:	dri-devel@lists.freedesktop.org
-T:	git git://anongit.freedesktop.org/drm/drm-misc
 S:	Maintained
+T:	git git://anongit.freedesktop.org/drm/drm-misc
+F:	Documentation/devicetree/bindings/display/panel/
 F:	drivers/gpu/drm/drm_panel.c
 F:	drivers/gpu/drm/panel/
 F:	include/drm/drm_panel.h
-F:	Documentation/devicetree/bindings/display/panel/
-
-DRM DRIVERS FOR XEN
-M:	Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
-T:	git git://anongit.freedesktop.org/drm/drm-misc
-L:	dri-devel@lists.freedesktop.org
-L:	xen-devel@lists.xenproject.org (moderated for non-subscribers)
-S:	Supported
-F:	drivers/gpu/drm/xen/
-F:	Documentation/gpu/xen-front.rst
 
 DRM TTM SUBSYSTEM
 M:	Christian Koenig <christian.koenig@amd.com>
 M:	Huang Rui <ray.huang@amd.com>
-T:	git git://people.freedesktop.org/~agd5f/linux
-S:	Maintained
 L:	dri-devel@lists.freedesktop.org
-F:	include/drm/ttm/
+S:	Maintained
+T:	git git://people.freedesktop.org/~agd5f/linux
 F:	drivers/gpu/drm/ttm/
+F:	include/drm/ttm/
 
 DSBR100 USB FM RADIO DRIVER
 M:	Alexey Klimov <klimov.linux@gmail.com>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/radio/dsbr100.c
 
 DT3155 MEDIA DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
-W:	https://linuxtv.org
 S:	Odd Fixes
+W:	https://linuxtv.org
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/pci/dt3155/
 
 DVB_USB_AF9015 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
-S:	Maintained
 F:	drivers/media/usb/dvb-usb-v2/af9015*
 
 DVB_USB_AF9035 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
-S:	Maintained
 F:	drivers/media/usb/dvb-usb-v2/af9035*
 
 DVB_USB_ANYSEE MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
-S:	Maintained
 F:	drivers/media/usb/dvb-usb-v2/anysee*
 
 DVB_USB_AU6610 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
-S:	Maintained
 F:	drivers/media/usb/dvb-usb-v2/au6610*
 
 DVB_USB_CE6230 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
-S:	Maintained
 F:	drivers/media/usb/dvb-usb-v2/ce6230*
 
 DVB_USB_CXUSB MEDIA DRIVER
 M:	Michael Krufky <mkrufky@linuxtv.org>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 W:	http://github.com/mkrufky
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/media_tree.git
-S:	Maintained
 F:	drivers/media/usb/dvb-usb/cxusb*
 
 DVB_USB_EC168 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
-S:	Maintained
 F:	drivers/media/usb/dvb-usb-v2/ec168*
 
 DVB_USB_GL861 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
-S:	Maintained
 F:	drivers/media/usb/dvb-usb-v2/gl861*
 
 DVB_USB_MXL111SF MEDIA DRIVER
 M:	Michael Krufky <mkrufky@linuxtv.org>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 W:	http://github.com/mkrufky
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/mkrufky/mxl111sf.git
-S:	Maintained
 F:	drivers/media/usb/dvb-usb-v2/mxl111sf*
 
 DVB_USB_RTL28XXU MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
-S:	Maintained
 F:	drivers/media/usb/dvb-usb-v2/rtl28xxu*
 
 DVB_USB_V2 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
-S:	Maintained
 F:	drivers/media/usb/dvb-usb-v2/dvb_usb*
 F:	drivers/media/usb/dvb-usb-v2/usb_urb.c
 
 DYNAMIC DEBUG
 M:	Jason Baron <jbaron@akamai.com>
 S:	Maintained
-F:	lib/dynamic_debug.c
 F:	include/linux/dynamic_debug.h
+F:	lib/dynamic_debug.c
 
 DYNAMIC INTERRUPT MODERATION
 M:	Tal Gilboa <talgi@mellanox.com>
 S:	Maintained
 F:	include/linux/dim.h
 F:	lib/dim/
+F:	Documentation/networking/net_dim.rst
 
 DZ DECSTATION DZ11 SERIAL DRIVER
 M:	"Maciej W. Rozycki" <macro@linux-mips.org>
@@ -5963,19 +5947,19 @@
 E3X0 POWER BUTTON DRIVER
 M:	Moritz Fischer <moritz.fischer@ettus.com>
 L:	usrp-users@lists.ettus.com
-W:	http://www.ettus.com
 S:	Supported
-F:	drivers/input/misc/e3x0-button.c
+W:	http://www.ettus.com
 F:	Documentation/devicetree/bindings/input/e3x0-button.txt
+F:	drivers/input/misc/e3x0-button.c
 
 E4000 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
-S:	Maintained
 F:	drivers/media/tuners/e4000*
 
 EARTH_PT1 MEDIA DRIVER
@@ -5993,20 +5977,20 @@
 EC100 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
-S:	Maintained
 F:	drivers/media/dvb-frontends/ec100*
 
 ECRYPT FILE SYSTEM
 M:	Tyler Hicks <code@tyhicks.com>
 L:	ecryptfs@vger.kernel.org
+S:	Odd Fixes
 W:	http://ecryptfs.org
 W:	https://launchpad.net/ecryptfs
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs.git
-S:	Odd Fixes
 F:	Documentation/filesystems/ecryptfs.rst
 F:	fs/ecryptfs/
 
@@ -6025,8 +6009,8 @@
 EDAC-AST2500
 M:	Stefan Schaeckeler <sschaeck@cisco.com>
 S:	Supported
-F:	drivers/edac/aspeed_edac.c
 F:	Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt
+F:	drivers/edac/aspeed_edac.c
 
 EDAC-BLUEFIELD
 M:	Shravan Kumar Ramani <sramani@mellanox.com>
@@ -6060,8 +6044,8 @@
 R:	James Morse <james.morse@arm.com>
 R:	Robert Richter <rrichter@marvell.com>
 L:	linux-edac@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras.git edac-for-next
 S:	Supported
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras.git edac-for-next
 F:	Documentation/admin-guide/ras.rst
 F:	Documentation/driver-api/edac.rst
 F:	drivers/edac/
@@ -6166,6 +6150,14 @@
 S:	Maintained
 F:	drivers/edac/pnd2_edac.[ch]
 
+EDAC-QCOM
+M:	Channagoud Kadabi <ckadabi@codeaurora.org>
+M:	Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org>
+L:	linux-arm-msm@vger.kernel.org
+L:	linux-edac@vger.kernel.org
+S:	Maintained
+F:	drivers/edac/qcom_edac.c
+
 EDAC-R82600
 M:	Tim Small <tim@buttersideup.com>
 L:	linux-edac@vger.kernel.org
@@ -6198,25 +6190,17 @@
 S:	Maintained
 F:	drivers/edac/ti_edac.c
 
-EDAC-QCOM
-M:	Channagoud Kadabi <ckadabi@codeaurora.org>
-M:	Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org>
-L:	linux-arm-msm@vger.kernel.org
-L:	linux-edac@vger.kernel.org
-S:	Maintained
-F:	drivers/edac/qcom_edac.c
-
 EDIROL UA-101/UA-1000 DRIVER
 M:	Clemens Ladisch <clemens@ladisch.de>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
 F:	sound/usb/misc/ua101.c
 
 EFI TEST DRIVER
-L:	linux-efi@vger.kernel.org
 M:	Ivan Hu <ivan.hu@canonical.com>
 M:	Ard Biesheuvel <ardb@kernel.org>
+L:	linux-efi@vger.kernel.org
 S:	Maintained
 F:	drivers/firmware/efi/test/
 
@@ -6224,20 +6208,20 @@
 M:	Matthew Garrett <matthew.garrett@nebula.com>
 M:	Jeremy Kerr <jk@ozlabs.org>
 M:	Ard Biesheuvel <ardb@kernel.org>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi.git
 L:	linux-efi@vger.kernel.org
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi.git
 F:	fs/efivarfs/
 
 EFIFB FRAMEBUFFER DRIVER
-L:	linux-fbdev@vger.kernel.org
 M:	Peter Jones <pjones@redhat.com>
+L:	linux-fbdev@vger.kernel.org
 S:	Maintained
 F:	drivers/video/fbdev/efifb.c
 
 EFS FILESYSTEM
-W:	http://aeschi.ch.eu.org/efs/
 S:	Orphan
+W:	http://aeschi.ch.eu.org/efs/
 F:	fs/efs/
 
 EHEA (IBM pSeries eHEA 10Gb ethernet adapter) DRIVER
@@ -6249,11 +6233,11 @@
 EM28XX VIDEO4LINUX DRIVER
 M:	Mauro Carvalho Chehab <mchehab@kernel.org>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
-S:	Maintained
-F:	drivers/media/usb/em28xx/
 F:	Documentation/media/v4l-drivers/em28xx*
+F:	drivers/media/usb/em28xx/
 
 EMBEDDED LINUX
 M:	Paul Gortmaker <paul.gortmaker@windriver.com>
@@ -6262,30 +6246,38 @@
 L:	linux-embedded@vger.kernel.org
 S:	Maintained
 
-Emulex 10Gbps iSCSI - OneConnect DRIVER
+EMMC CMDQ HOST CONTROLLER INTERFACE (CQHCI) DRIVER
+M:	Adrian Hunter <adrian.hunter@intel.com>
+M:	Ritesh Harjani <riteshh@codeaurora.org>
+M:	Asutosh Das <asutoshd@codeaurora.org>
+L:	linux-mmc@vger.kernel.org
+S:	Maintained
+F:	drivers/mmc/host/cqhci*
+
+EMULEX 10Gbps iSCSI - OneConnect DRIVER
 M:	Subbu Seetharaman <subbu.seetharaman@broadcom.com>
 M:	Ketan Mukadam <ketan.mukadam@broadcom.com>
 M:	Jitendra Bhivare <jitendra.bhivare@broadcom.com>
 L:	linux-scsi@vger.kernel.org
-W:	http://www.broadcom.com
 S:	Supported
+W:	http://www.broadcom.com
 F:	drivers/scsi/be2iscsi/
 
-Emulex 10Gbps NIC BE2, BE3-R, Lancer, Skyhawk-R DRIVER (be2net)
+EMULEX 10Gbps NIC BE2, BE3-R, Lancer, Skyhawk-R DRIVER (be2net)
 M:	Ajit Khaparde <ajit.khaparde@broadcom.com>
 M:	Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
 M:	Somnath Kotur <somnath.kotur@broadcom.com>
 L:	netdev@vger.kernel.org
-W:	http://www.emulex.com
 S:	Supported
+W:	http://www.emulex.com
 F:	drivers/net/ethernet/emulex/benet/
 
 EMULEX ONECONNECT ROCE DRIVER
 M:	Selvin Xavier <selvin.xavier@broadcom.com>
 M:	Devesh Sharma <devesh.sharma@broadcom.com>
 L:	linux-rdma@vger.kernel.org
-W:	http://www.broadcom.com
 S:	Odd Fixes
+W:	http://www.broadcom.com
 F:	drivers/infiniband/hw/ocrdma/
 F:	include/uapi/rdma/ocrdma-abi.h
 
@@ -6293,8 +6285,8 @@
 M:	James Smart <james.smart@broadcom.com>
 M:	Dick Kennedy <dick.kennedy@broadcom.com>
 L:	linux-scsi@vger.kernel.org
-W:	http://www.broadcom.com
 S:	Supported
+W:	http://www.broadcom.com
 F:	drivers/scsi/lpfc/
 
 ENE CB710 FLASH CARD READER DRIVER
@@ -6335,8 +6327,8 @@
 ERRSEQ ERROR TRACKING INFRASTRUCTURE
 M:	Jeff Layton <jlayton@kernel.org>
 S:	Maintained
-F:	lib/errseq.c
 F:	include/linux/errseq.h
+F:	lib/errseq.c
 
 ET131X NETWORK DRIVER
 M:	Mark Einon <mark.einon@gmail.com>
@@ -6348,8 +6340,8 @@
 M:	Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
 L:	bridge@lists.linux-foundation.org (moderated for non-subscribers)
 L:	netdev@vger.kernel.org
-W:	http://www.linuxfoundation.org/en/Net:Bridge
 S:	Maintained
+W:	http://www.linuxfoundation.org/en/Net:Bridge
 F:	include/linux/netfilter_bridge/
 F:	net/bridge/
 
@@ -6379,6 +6371,13 @@
 F:	include/uapi/linux/mdio.h
 F:	include/uapi/linux/mii.h
 
+EXFAT FILE SYSTEM
+M:	Namjae Jeon <namjae.jeon@samsung.com>
+M:	Sungjong Seo <sj1557.seo@samsung.com>
+L:	linux-fsdevel@vger.kernel.org
+S:	Maintained
+F:	fs/exfat/
+
 EXT2 FILE SYSTEM
 M:	Jan Kara <jack@suse.com>
 L:	linux-ext4@vger.kernel.org
@@ -6391,10 +6390,10 @@
 M:	"Theodore Ts'o" <tytso@mit.edu>
 M:	Andreas Dilger <adilger.kernel@dilger.ca>
 L:	linux-ext4@vger.kernel.org
+S:	Maintained
 W:	http://ext4.wiki.kernel.org
 Q:	http://patchwork.ozlabs.org/project/linux-ext4/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4.git
-S:	Maintained
 F:	Documentation/filesystems/ext4/
 F:	fs/ext4/
 
@@ -6407,28 +6406,37 @@
 EXTENSIBLE FIRMWARE INTERFACE (EFI)
 M:	Ard Biesheuvel <ardb@kernel.org>
 L:	linux-efi@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi.git
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi.git
 F:	Documentation/admin-guide/efi-stub.rst
-F:	arch/*/kernel/efi.c
 F:	arch/*/include/asm/efi.h
+F:	arch/*/kernel/efi.c
+F:	arch/arm/boot/compressed/efi-header.S
+F:	arch/arm64/kernel/efi-entry.S
 F:	arch/x86/platform/efi/
 F:	drivers/firmware/efi/
 F:	include/linux/efi*.h
-F:	arch/arm/boot/compressed/efi-header.S
-F:	arch/arm64/kernel/efi-entry.S
 
 EXTERNAL CONNECTOR SUBSYSTEM (EXTCON)
 M:	MyungJoo Ham <myungjoo.ham@samsung.com>
 M:	Chanwoo Choi <cw00.choi@samsung.com>
 L:	linux-kernel@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon.git
 S:	Maintained
-F:	drivers/extcon/
-F:	include/linux/extcon/
-F:	include/linux/extcon.h
-F:	Documentation/firmware-guide/acpi/extcon-intel-int3496.rst
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon.git
 F:	Documentation/devicetree/bindings/extcon/
+F:	Documentation/firmware-guide/acpi/extcon-intel-int3496.rst
+F:	drivers/extcon/
+F:	include/linux/extcon.h
+F:	include/linux/extcon/
+
+EXTRA BOOT CONFIG
+M:	Masami Hiramatsu <mhiramat@kernel.org>
+S:	Maintained
+F:	Documentation/admin-guide/bootconfig.rst
+F:	fs/proc/bootconfig.c
+F:	include/linux/bootconfig.h
+F:	lib/bootconfig.c
+F:	tools/bootconfig/*
 
 EXYNOS DP DRIVER
 M:	Jingoo Han <jingoohan1@gmail.com>
@@ -6446,18 +6454,18 @@
 M:	Vineet Gupta <vgupta@synopsys.com>
 M:	Ofer Levi <oferle@mellanox.com>
 S:	Supported
-F:	arch/arc/plat-eznps
 F:	arch/arc/boot/dts/eznps.dts
+F:	arch/arc/plat-eznps
 
 F2FS FILE SYSTEM
 M:	Jaegeuk Kim <jaegeuk@kernel.org>
 M:	Chao Yu <yuchao0@huawei.com>
 L:	linux-f2fs-devel@lists.sourceforge.net
+S:	Maintained
 W:	https://f2fs.wiki.kernel.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs.git
-S:	Maintained
-F:	Documentation/filesystems/f2fs.rst
 F:	Documentation/ABI/testing/sysfs-fs-f2fs
+F:	Documentation/filesystems/f2fs.rst
 F:	fs/f2fs/
 F:	include/linux/f2fs_fs.h
 F:	include/trace/events/f2fs.h
@@ -6478,9 +6486,9 @@
 M:	Sridhar Samudrala <sridhar.samudrala@intel.com>
 L:	netdev@vger.kernel.org
 S:	Supported
-F:	net/core/failover.c
-F:	include/net/failover.h
 F:	Documentation/networking/failover.rst
+F:	include/net/failover.h
+F:	net/core/failover.c
 
 FANOTIFY
 M:	Jan Kara <jack@suse.cz>
@@ -6493,8 +6501,8 @@
 
 FARSYNC SYNCHRONOUS DRIVER
 M:	Kevin Curtis <kevin.curtis@farsite.co.uk>
-W:	http://www.farsite.co.uk/
 S:	Supported
+W:	http://www.farsite.co.uk/
 F:	drivers/net/wan/farsync.*
 
 FAULT INJECTION SUPPORT
@@ -6504,35 +6512,35 @@
 F:	lib/fault-inject.c
 
 FBTFT Framebuffer drivers
-S:	Orphan
 L:	dri-devel@lists.freedesktop.org
 L:	linux-fbdev@vger.kernel.org
+S:	Orphan
 F:	drivers/staging/fbtft/
 
 FC0011 TUNER DRIVER
 M:	Michael Buesch <m@bues.ch>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-F:	drivers/media/tuners/fc0011.h
 F:	drivers/media/tuners/fc0011.c
+F:	drivers/media/tuners/fc0011.h
 
 FC2580 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
-S:	Maintained
 F:	drivers/media/tuners/fc2580*
 
 FCOE SUBSYSTEM (libfc, libfcoe, fcoe)
 M:	Hannes Reinecke <hare@suse.de>
 L:	linux-scsi@vger.kernel.org
-W:	www.Open-FCoE.org
 S:	Supported
-F:	drivers/scsi/libfc/
+W:	www.Open-FCoE.org
 F:	drivers/scsi/fcoe/
+F:	drivers/scsi/libfc/
 F:	include/scsi/fc/
 F:	include/scsi/libfc.h
 F:	include/scsi/libfcoe.h
@@ -6543,10 +6551,21 @@
 M:	"J. Bruce Fields" <bfields@fieldses.org>
 L:	linux-fsdevel@vger.kernel.org
 S:	Maintained
-F:	include/linux/fcntl.h
-F:	include/uapi/linux/fcntl.h
 F:	fs/fcntl.c
 F:	fs/locks.c
+F:	include/linux/fcntl.h
+F:	include/uapi/linux/fcntl.h
+
+FILESYSTEM DIRECT ACCESS (DAX)
+M:	Dan Williams <dan.j.williams@intel.com>
+R:	Matthew Wilcox <willy@infradead.org>
+R:	Jan Kara <jack@suse.cz>
+L:	linux-fsdevel@vger.kernel.org
+L:	linux-nvdimm@lists.01.org
+S:	Supported
+F:	fs/dax.c
+F:	include/linux/dax.h
+F:	include/trace/events/fs_dax.h
 
 FILESYSTEMS (VFS and infrastructure)
 M:	Alexander Viro <viro@zeniv.linux.org.uk>
@@ -6569,17 +6588,17 @@
 M:	Clemens Ladisch <clemens@ladisch.de>
 M:	Takashi Sakamoto <o-takashi@sakamocchi.jp>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
 S:	Maintained
-F:	sound/firewire/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
 F:	include/uapi/sound/firewire.h
+F:	sound/firewire/
 
 FIREWIRE MEDIA DRIVERS (firedtv)
 M:	Stefan Richter <stefanr@s5r6.in-berlin.de>
 L:	linux-media@vger.kernel.org
 L:	linux1394-devel@lists.sourceforge.net
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git
 F:	drivers/media/firewire/
 
 FIREWIRE SBP-2 TARGET
@@ -6587,16 +6606,16 @@
 L:	linux-scsi@vger.kernel.org
 L:	target-devel@vger.kernel.org
 L:	linux1394-devel@lists.sourceforge.net
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/nab/lio-core-2.6.git master
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/nab/lio-core-2.6.git master
 F:	drivers/target/sbp/
 
 FIREWIRE SUBSYSTEM
 M:	Stefan Richter <stefanr@s5r6.in-berlin.de>
 L:	linux1394-devel@lists.sourceforge.net
+S:	Maintained
 W:	http://ieee1394.wiki.kernel.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394.git
-S:	Maintained
 F:	drivers/firewire/
 F:	include/linux/firewire.h
 F:	include/uapi/linux/firewire*.h
@@ -6626,35 +6645,48 @@
 
 FLOPPY DRIVER
 M:	Denis Efremov <efremov@linux.com>
-S:	Odd Fixes
 L:	linux-block@vger.kernel.org
+S:	Odd Fixes
 F:	drivers/block/floppy.c
 
-FPGA MANAGER FRAMEWORK
-M:	Moritz Fischer <mdf@kernel.org>
-L:	linux-fpga@vger.kernel.org
+FLYSKY FSIA6B RC RECEIVER
+M:	Markus Koch <markus@notsyncing.net>
+L:	linux-input@vger.kernel.org
 S:	Maintained
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga.git
-Q:	http://patchwork.kernel.org/project/linux-fpga/list/
-F:	Documentation/fpga/
-F:	Documentation/driver-api/fpga/
-F:	Documentation/devicetree/bindings/fpga/
-F:	drivers/fpga/
-F:	include/linux/fpga/
-W:	http://www.rocketboards.org
+F:	drivers/input/joystick/fsia6b.c
+
+FORCEDETH GIGABIT ETHERNET DRIVER
+M:	Rain River <rain.1986.08.12@gmail.com>
+M:	Zhu Yanjun <zyjzyj2000@gmail.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	drivers/net/ethernet/nvidia/*
 
 FPGA DFL DRIVERS
 M:	Wu Hao <hao.wu@intel.com>
 L:	linux-fpga@vger.kernel.org
 S:	Maintained
 F:	Documentation/fpga/dfl.rst
-F:	include/uapi/linux/fpga-dfl.h
 F:	drivers/fpga/dfl*
+F:	include/uapi/linux/fpga-dfl.h
+
+FPGA MANAGER FRAMEWORK
+M:	Moritz Fischer <mdf@kernel.org>
+L:	linux-fpga@vger.kernel.org
+S:	Maintained
+W:	http://www.rocketboards.org
+Q:	http://patchwork.kernel.org/project/linux-fpga/list/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga.git
+F:	Documentation/devicetree/bindings/fpga/
+F:	Documentation/driver-api/fpga/
+F:	Documentation/fpga/
+F:	drivers/fpga/
+F:	include/linux/fpga/
 
 FPU EMULATOR
 M:	Bill Metzenthen <billm@melbpc.org.au>
-W:	http://floatingpoint.sourceforge.net/emulator/index.html
 S:	Maintained
+W:	http://floatingpoint.sourceforge.net/emulator/index.html
 F:	arch/x86/math-emu/
 
 FRAME RELAY DLCI/FRAD (Sangoma drivers too)
@@ -6667,23 +6699,23 @@
 M:	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
 L:	dri-devel@lists.freedesktop.org
 L:	linux-fbdev@vger.kernel.org
-T:	git git://anongit.freedesktop.org/drm/drm-misc
-Q:	http://patchwork.kernel.org/project/linux-fbdev/list/
 S:	Maintained
+Q:	http://patchwork.kernel.org/project/linux-fbdev/list/
+T:	git git://anongit.freedesktop.org/drm/drm-misc
 F:	Documentation/fb/
 F:	drivers/video/
-F:	include/video/
 F:	include/linux/fb.h
-F:	include/uapi/video/
 F:	include/uapi/linux/fb.h
+F:	include/uapi/video/
+F:	include/video/
 
 FREESCALE CAAM (Cryptographic Acceleration and Assurance Module) DRIVER
 M:	Horia Geantă <horia.geanta@nxp.com>
 M:	Aymen Sghaier <aymen.sghaier@nxp.com>
 L:	linux-crypto@vger.kernel.org
 S:	Maintained
-F:	drivers/crypto/caam/
 F:	Documentation/devicetree/bindings/crypto/fsl-sec4.txt
+F:	drivers/crypto/caam/
 
 FREESCALE DIU FRAMEBUFFER DRIVER
 M:	Timur Tabi <timur@kernel.org>
@@ -6708,8 +6740,8 @@
 M:	Claudiu Manoil <claudiu.manoil@nxp.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/ethernet/freescale/gianfar*
 F:	Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
+F:	drivers/net/ethernet/freescale/gianfar*
 
 FREESCALE GPMI NAND DRIVER
 M:	Han Xu <han.xu@nxp.com>
@@ -6724,38 +6756,14 @@
 S:	Maintained
 F:	drivers/i2c/busses/i2c-cpm.c
 
-FREESCALE IMX DDR PMU DRIVER
-M:	Frank Li <Frank.li@nxp.com>
-L:	linux-arm-kernel@lists.infradead.org
-S:	Maintained
-F:	drivers/perf/fsl_imx8_ddr_perf.c
-F:	Documentation/admin-guide/perf/imx-ddr.rst
-F:	Documentation/devicetree/bindings/perf/fsl-imx-ddr.txt
-
-FREESCALE IMX I2C DRIVER
-M:	Oleksij Rempel <o.rempel@pengutronix.de>
-R:	Pengutronix Kernel Team <kernel@pengutronix.de>
-L:	linux-i2c@vger.kernel.org
-S:	Maintained
-F:	drivers/i2c/busses/i2c-imx.c
-F:	Documentation/devicetree/bindings/i2c/i2c-imx.txt
-
-FREESCALE IMX LPI2C DRIVER
-M:	Dong Aisheng <aisheng.dong@nxp.com>
-L:	linux-i2c@vger.kernel.org
-L:	linux-imx@nxp.com
-S:	Maintained
-F:	drivers/i2c/busses/i2c-imx-lpi2c.c
-F:	Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt
-
 FREESCALE IMX / MXC FEC DRIVER
 M:	Fugang Duan <fugang.duan@nxp.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
+F:	Documentation/devicetree/bindings/net/fsl-fec.txt
+F:	drivers/net/ethernet/freescale/fec.h
 F:	drivers/net/ethernet/freescale/fec_main.c
 F:	drivers/net/ethernet/freescale/fec_ptp.c
-F:	drivers/net/ethernet/freescale/fec.h
-F:	Documentation/devicetree/bindings/net/fsl-fec.txt
 
 FREESCALE IMX / MXC FRAMEBUFFER DRIVER
 M:	Sascha Hauer <s.hauer@pengutronix.de>
@@ -6763,8 +6771,32 @@
 L:	linux-fbdev@vger.kernel.org
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-F:	include/linux/platform_data/video-imxfb.h
 F:	drivers/video/fbdev/imxfb.c
+F:	include/linux/platform_data/video-imxfb.h
+
+FREESCALE IMX DDR PMU DRIVER
+M:	Frank Li <Frank.li@nxp.com>
+L:	linux-arm-kernel@lists.infradead.org
+S:	Maintained
+F:	Documentation/admin-guide/perf/imx-ddr.rst
+F:	Documentation/devicetree/bindings/perf/fsl-imx-ddr.txt
+F:	drivers/perf/fsl_imx8_ddr_perf.c
+
+FREESCALE IMX I2C DRIVER
+M:	Oleksij Rempel <o.rempel@pengutronix.de>
+R:	Pengutronix Kernel Team <kernel@pengutronix.de>
+L:	linux-i2c@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/i2c/i2c-imx.txt
+F:	drivers/i2c/busses/i2c-imx.c
+
+FREESCALE IMX LPI2C DRIVER
+M:	Dong Aisheng <aisheng.dong@nxp.com>
+L:	linux-i2c@vger.kernel.org
+L:	linux-imx@nxp.com
+S:	Maintained
+F:	Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt
+F:	drivers/i2c/busses/i2c-imx-lpi2c.c
 
 FREESCALE QORIQ DPAA ETHERNET DRIVER
 M:	Madalin Bucur <madalin.bucur@nxp.com>
@@ -6776,20 +6808,20 @@
 M:	Madalin Bucur <madalin.bucur@nxp.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/ethernet/freescale/fman
 F:	Documentation/devicetree/bindings/net/fsl-fman.txt
+F:	drivers/net/ethernet/freescale/fman
 
 FREESCALE QORIQ PTP CLOCK DRIVER
 M:	Yangbo Lu <yangbo.lu@nxp.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
+F:	Documentation/devicetree/bindings/ptp/ptp-qoriq.txt
 F:	drivers/net/ethernet/freescale/dpaa2/dpaa2-ptp*
 F:	drivers/net/ethernet/freescale/dpaa2/dprtc*
 F:	drivers/net/ethernet/freescale/enetc/enetc_ptp.c
 F:	drivers/ptp/ptp_qoriq.c
 F:	drivers/ptp/ptp_qoriq_debugfs.c
 F:	include/linux/fsl/ptp_qoriq.h
-F:	Documentation/devicetree/bindings/ptp/ptp-qoriq.txt
 
 FREESCALE QUAD SPI DRIVER
 M:	Han Xu <han.xu@nxp.com>
@@ -6864,8 +6896,8 @@
 
 FREEVXFS FILESYSTEM
 M:	Christoph Hellwig <hch@infradead.org>
-W:	ftp://ftp.openlinux.org/pub/people/hch/vxfs
 S:	Maintained
+W:	ftp://ftp.openlinux.org/pub/people/hch/vxfs
 F:	fs/freevxfs/
 
 FREEZER
@@ -6881,8 +6913,8 @@
 M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
-F:	mm/frontswap.c
 F:	include/linux/frontswap.h
+F:	mm/frontswap.c
 
 FS-CACHE: LOCAL CACHING FOR NETWORK FILESYSTEMS
 M:	David Howells <dhowells@redhat.com>
@@ -6897,13 +6929,13 @@
 M:	Jaegeuk Kim <jaegeuk@kernel.org>
 M:	Eric Biggers <ebiggers@kernel.org>
 L:	linux-fscrypt@vger.kernel.org
+S:	Supported
 Q:	https://patchwork.kernel.org/project/linux-fscrypt/list/
 T:	git git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt.git
-S:	Supported
+F:	Documentation/filesystems/fscrypt.rst
 F:	fs/crypto/
 F:	include/linux/fscrypt*.h
 F:	include/uapi/linux/fscrypt.h
-F:	Documentation/filesystems/fscrypt.rst
 
 FSI SUBSYSTEM
 M:	Jeremy Kerr <jk@ozlabs.org>
@@ -6911,9 +6943,9 @@
 R:	Alistar Popple <alistair@popple.id.au>
 R:	Eddie James <eajames@linux.ibm.com>
 L:	linux-fsi@lists.ozlabs.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/joel/fsi.git
-Q:	http://patchwork.ozlabs.org/project/linux-fsi/list/
 S:	Supported
+Q:	http://patchwork.ozlabs.org/project/linux-fsi/list/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/joel/fsi.git
 F:	drivers/fsi/
 F:	include/linux/fsi*.h
 F:	include/trace/events/fsi*.h
@@ -6923,22 +6955,22 @@
 L:	linux-i2c@vger.kernel.org
 L:	openbmc@lists.ozlabs.org (moderated for non-subscribers)
 S:	Maintained
-F:	drivers/i2c/busses/i2c-fsi.c
 F:	Documentation/devicetree/bindings/i2c/i2c-fsi.txt
+F:	drivers/i2c/busses/i2c-fsi.c
 
 FSI-ATTACHED SPI DRIVER
 M:	Eddie James <eajames@linux.ibm.com>
 L:	linux-spi@vger.kernel.org
 S:	Maintained
-F:	drivers/spi/spi-fsi.c
 F:	Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml
+F:	drivers/spi/spi-fsi.c
 
 FSNOTIFY: FILESYSTEM NOTIFICATION INFRASTRUCTURE
 M:	Jan Kara <jack@suse.cz>
 R:	Amir Goldstein <amir73il@gmail.com>
 L:	linux-fsdevel@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs.git fsnotify
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs.git fsnotify
 F:	fs/notify/
 F:	include/linux/fsnotify*.h
 
@@ -6946,13 +6978,13 @@
 M:	Eric Biggers <ebiggers@kernel.org>
 M:	Theodore Y. Ts'o <tytso@mit.edu>
 L:	linux-fscrypt@vger.kernel.org
+S:	Supported
 Q:	https://patchwork.kernel.org/project/linux-fscrypt/list/
 T:	git git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt.git fsverity
-S:	Supported
+F:	Documentation/filesystems/fsverity.rst
 F:	fs/verity/
 F:	include/linux/fsverity.h
 F:	include/uapi/linux/fsverity.h
-F:	Documentation/filesystems/fsverity.rst
 
 FUJITSU LAPTOP EXTRAS
 M:	Jonathan Woithe <jwoithe@just42.net>
@@ -6977,12 +7009,12 @@
 FUSE: FILESYSTEM IN USERSPACE
 M:	Miklos Szeredi <miklos@szeredi.hu>
 L:	linux-fsdevel@vger.kernel.org
+S:	Maintained
 W:	http://fuse.sourceforge.net/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse.git
-S:	Maintained
+F:	Documentation/filesystems/fuse.rst
 F:	fs/fuse/
 F:	include/uapi/linux/fuse.h
-F:	Documentation/filesystems/fuse.rst
 
 FUTEX SUBSYSTEM
 M:	Thomas Gleixner <tglx@linutronix.de>
@@ -6990,25 +7022,15 @@
 R:	Peter Zijlstra <peterz@infradead.org>
 R:	Darren Hart <dvhart@infradead.org>
 L:	linux-kernel@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git locking/core
 S:	Maintained
-F:	kernel/futex.c
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git locking/core
+F:	Documentation/*futex*
 F:	include/asm-generic/futex.h
 F:	include/linux/futex.h
 F:	include/uapi/linux/futex.h
-F:	tools/testing/selftests/futex/
+F:	kernel/futex.c
 F:	tools/perf/bench/futex*
-F:	Documentation/*futex*
-
-GCC PLUGINS
-M:	Kees Cook <keescook@chromium.org>
-R:	Emese Revfy <re.emese@gmail.com>
-L:	kernel-hardening@lists.openwall.com
-S:	Maintained
-F:	scripts/gcc-plugins/
-F:	scripts/gcc-plugin.sh
-F:	scripts/Makefile.gcc-plugins
-F:	Documentation/kbuild/gcc-plugins.rst
+F:	tools/testing/selftests/futex/
 
 GASKET DRIVER FRAMEWORK
 M:	Rob Springer <rspringer@google.com>
@@ -7017,11 +7039,21 @@
 S:	Maintained
 F:	drivers/staging/gasket/
 
+GCC PLUGINS
+M:	Kees Cook <keescook@chromium.org>
+R:	Emese Revfy <re.emese@gmail.com>
+L:	kernel-hardening@lists.openwall.com
+S:	Maintained
+F:	Documentation/kbuild/gcc-plugins.rst
+F:	scripts/Makefile.gcc-plugins
+F:	scripts/gcc-plugin.sh
+F:	scripts/gcc-plugins/
+
 GCOV BASED KERNEL PROFILING
 M:	Peter Oberparleiter <oberpar@linux.ibm.com>
 S:	Maintained
-F:	kernel/gcov/
 F:	Documentation/dev-tools/gcov.rst
+F:	kernel/gcov/
 
 GDB KERNEL DEBUGGING HELPER SCRIPTS
 M:	Jan Kiszka <jan.kiszka@siemens.com>
@@ -7032,16 +7064,16 @@
 GDT SCSI DISK ARRAY CONTROLLER DRIVER
 M:	Achim Leubner <achim_leubner@adaptec.com>
 L:	linux-scsi@vger.kernel.org
-W:	http://www.icp-vortex.com/
 S:	Supported
+W:	http://www.icp-vortex.com/
 F:	drivers/scsi/gdt*
 
 GEMTEK FM RADIO RECEIVER DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
-W:	https://linuxtv.org
 S:	Maintained
+W:	https://linuxtv.org
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/radio/radio-gemtek*
 
 GENERIC ARCHITECTURE TOPOLOGY
@@ -7061,14 +7093,14 @@
 M:	Peter Korsgaard <peter.korsgaard@barco.com>
 L:	linux-i2c@vger.kernel.org
 S:	Supported
+F:	Documentation/i2c/muxes/i2c-mux-gpio.rst
 F:	drivers/i2c/muxes/i2c-mux-gpio.c
 F:	include/linux/platform_data/i2c-mux-gpio.h
-F:	Documentation/i2c/muxes/i2c-mux-gpio.rst
 
 GENERIC HDLC (WAN) DRIVERS
 M:	Krzysztof Halasa <khc@pm.waw.pl>
-W:	http://www.kernel.org/pub/linux/utils/net/hdlc/
 S:	Maintained
+W:	http://www.kernel.org/pub/linux/utils/net/hdlc/
 F:	drivers/net/wan/c101.c
 F:	drivers/net/wan/hd6457*
 F:	drivers/net/wan/hdlc*
@@ -7080,19 +7112,19 @@
 GENERIC INCLUDE/ASM HEADER FILES
 M:	Arnd Bergmann <arnd@arndb.de>
 L:	linux-arch@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic.git
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic.git
 F:	include/asm-generic/
 F:	include/uapi/asm-generic/
 
 GENERIC PHY FRAMEWORK
 M:	Kishon Vijay Abraham I <kishon@ti.com>
 L:	linux-kernel@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy.git
 S:	Supported
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy.git
+F:	Documentation/devicetree/bindings/phy/
 F:	drivers/phy/
 F:	include/linux/phy/
-F:	Documentation/devicetree/bindings/phy/
 
 GENERIC PINCTRL I2C DEMULTIPLEXER DRIVER
 M:	Wolfram Sang <wsa+renesas@sang-engineering.com>
@@ -7105,9 +7137,9 @@
 M:	Ulf Hansson <ulf.hansson@linaro.org>
 L:	linux-pm@vger.kernel.org
 S:	Supported
+F:	Documentation/devicetree/bindings/power/power?domain*
 F:	drivers/base/power/domain*.c
 F:	include/linux/pm_domain.h
-F:	Documentation/devicetree/bindings/power/power?domain*
 
 GENERIC RESISTIVE TOUCHSCREEN ADC DRIVER
 M:	Eugen Hristev <eugen.hristev@microchip.com>
@@ -7126,12 +7158,12 @@
 M:	Thomas Gleixner <tglx@linutronix.de>
 M:	Vincenzo Frascino <vincenzo.frascino@arm.com>
 L:	linux-kernel@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/vdso
 S:	Maintained
-F:	lib/vdso/
-F:	kernel/time/vsyscall.c
-F:	include/vdso/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/vdso
 F:	include/asm-generic/vdso/vsyscall.h
+F:	include/vdso/
+F:	kernel/time/vsyscall.c
+F:	lib/vdso/
 
 GENWQE (IBM Generic Workqueue Card)
 M:	Frank Haverkamp <haver@linux.ibm.com>
@@ -7147,17 +7179,17 @@
 M:	Bob Peterson <rpeterso@redhat.com>
 M:	Andreas Gruenbacher <agruenba@redhat.com>
 L:	cluster-devel@redhat.com
+S:	Supported
 W:	http://sources.redhat.com/cluster/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2.git
-S:	Supported
 F:	Documentation/filesystems/gfs2*.txt
 F:	fs/gfs2/
 F:	include/uapi/linux/gfs2_ondisk.h
 
 GNSS SUBSYSTEM
 M:	Johan Hovold <johan@kernel.org>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/johan/gnss.git
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/johan/gnss.git
 F:	Documentation/ABI/testing/sysfs-class-gnss
 F:	Documentation/devicetree/bindings/gnss/
 F:	drivers/gnss/
@@ -7226,8 +7258,8 @@
 F:	Documentation/driver-api/gpio/
 F:	drivers/gpio/
 F:	include/asm-generic/gpio.h
-F:	include/linux/gpio/
 F:	include/linux/gpio.h
+F:	include/linux/gpio/
 F:	include/linux/of_gpio.h
 F:	include/uapi/linux/gpio.h
 F:	tools/gpio/
@@ -7236,9 +7268,9 @@
 M:	Dmitry Kozlov <xeb@mail.ru>
 L:	netdev@vger.kernel.org
 S:	Maintained
+F:	include/net/gre.h
 F:	net/ipv4/gre_demux.c
 F:	net/ipv4/gre_offload.c
-F:	include/net/gre.h
 
 GRETH 10/100/1G Ethernet MAC device driver
 M:	Andreas Larsson <andreas@gaisler.com>
@@ -7288,17 +7320,17 @@
 GREYBUS PLATFORM DRIVERS
 M:	Vaibhav Hiremath <hvaibhav.linux@gmail.com>
 S:	Maintained
-F:	drivers/staging/greybus/arche-platform.c
 F:	drivers/staging/greybus/arche-apb-ctrl.c
+F:	drivers/staging/greybus/arche-platform.c
 F:	drivers/staging/greybus/arche_platform.h
 
 GREYBUS SDIO/GPIO/SPI PROTOCOLS DRIVERS
 M:	Rui Miguel Silva <rmfrfs@gmail.com>
 S:	Maintained
-F:	drivers/staging/greybus/sdio.c
-F:	drivers/staging/greybus/light.c
 F:	drivers/staging/greybus/gpio.c
+F:	drivers/staging/greybus/light.c
 F:	drivers/staging/greybus/power_supply.c
+F:	drivers/staging/greybus/sdio.c
 F:	drivers/staging/greybus/spi.c
 F:	drivers/staging/greybus/spilib.c
 
@@ -7306,81 +7338,81 @@
 M:	Johan Hovold <johan@kernel.org>
 M:	Alex Elder <elder@kernel.org>
 M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+L:	greybus-dev@lists.linaro.org (moderated for non-subscribers)
 S:	Maintained
-F:	drivers/staging/greybus/
 F:	drivers/greybus/
+F:	drivers/staging/greybus/
 F:	include/linux/greybus.h
 F:	include/linux/greybus/
-L:	greybus-dev@lists.linaro.org (moderated for non-subscribers)
 
 GREYBUS UART PROTOCOLS DRIVERS
 M:	David Lin <dtwlin@gmail.com>
 S:	Maintained
-F:	drivers/staging/greybus/uart.c
 F:	drivers/staging/greybus/log.c
+F:	drivers/staging/greybus/uart.c
 
 GS1662 VIDEO SERIALIZER
 M:	Charles-Antoine Couret <charles-antoine.couret@nexvision.fr>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/spi/gs1662.c
 
 GSPCA FINEPIX SUBDRIVER
 M:	Frank Zago <frank@zago.net>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/usb/gspca/finepix.c
 
 GSPCA GL860 SUBDRIVER
 M:	Olivier Lorin <o.lorin@laposte.net>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/usb/gspca/gl860/
 
 GSPCA M5602 SUBDRIVER
 M:	Erik Andren <erik.andren@gmail.com>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/usb/gspca/m5602/
 
 GSPCA PAC207 SONIXB SUBDRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Odd Fixes
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/usb/gspca/pac207.c
 
 GSPCA SN9C20X SUBDRIVER
 M:	Brian Johnson <brijohn@gmail.com>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/usb/gspca/sn9c20x.c
 
 GSPCA T613 SUBDRIVER
 M:	Leandro Costantino <lcostantino@gmail.com>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/usb/gspca/t613.c
 
 GSPCA USB WEBCAM DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Odd Fixes
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/usb/gspca/
 
 GTP (GPRS Tunneling Protocol)
 M:	Pablo Neira Ayuso <pablo@netfilter.org>
 M:	Harald Welte <laforge@gnumonks.org>
 L:	osmocom-net-gprs@lists.osmocom.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/pablo/gtp.git
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/pablo/gtp.git
 F:	drivers/net/gtp.c
 
 GUID PARTITION TABLE (GPT)
@@ -7392,33 +7424,43 @@
 H8/300 ARCHITECTURE
 M:	Yoshinori Sato <ysato@users.sourceforge.jp>
 L:	uclinux-h8-devel@lists.sourceforge.jp (moderated for non-subscribers)
+S:	Maintained
 W:	http://uclinux-h8.sourceforge.jp
 T:	git git://git.sourceforge.jp/gitroot/uclinux-h8/linux.git
-S:	Maintained
 F:	arch/h8300/
-F:	drivers/clocksource/h8300_*.c
 F:	drivers/clk/h8300/
+F:	drivers/clocksource/h8300_*.c
 F:	drivers/irqchip/irq-renesas-h8*.c
 
 HABANALABS PCI DRIVER
 M:	Oded Gabbay <oded.gabbay@gmail.com>
-T:	git https://github.com/HabanaAI/linux.git
 S:	Supported
+T:	git https://github.com/HabanaAI/linux.git
+F:	Documentation/ABI/testing/debugfs-driver-habanalabs
+F:	Documentation/ABI/testing/sysfs-driver-habanalabs
 F:	drivers/misc/habanalabs/
 F:	include/uapi/misc/habanalabs.h
-F:	Documentation/ABI/testing/sysfs-driver-habanalabs
-F:	Documentation/ABI/testing/debugfs-driver-habanalabs
 
 HACKRF MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
-S:	Maintained
 F:	drivers/media/usb/hackrf/
 
+HANTRO VPU CODEC DRIVER
+M:	Ezequiel Garcia <ezequiel@collabora.com>
+M:	Philipp Zabel <p.zabel@pengutronix.de>
+L:	linux-media@vger.kernel.org
+L:	linux-rockchip@lists.infradead.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml
+F:	Documentation/devicetree/bindings/media/rockchip-vpu.txt
+F:	drivers/staging/media/hantro/
+
 HARD DRIVE ACTIVE PROTECTION SYSTEM (HDAPS) DRIVER
 M:	Frank Seidel <frank@f-seidel.de>
 L:	platform-driver-x86@vger.kernel.org
@@ -7430,9 +7472,9 @@
 M:	Jean Delvare <jdelvare@suse.com>
 M:	Guenter Roeck <linux@roeck-us.net>
 L:	linux-hwmon@vger.kernel.org
+S:	Maintained
 W:	http://hwmon.wiki.kernel.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git
-S:	Maintained
 F:	Documentation/devicetree/bindings/hwmon/
 F:	Documentation/hwmon/
 F:	drivers/hwmon/
@@ -7444,16 +7486,11 @@
 M:	Herbert Xu <herbert@gondor.apana.org.au>
 L:	linux-crypto@vger.kernel.org
 S:	Odd fixes
-F:	Documentation/devicetree/bindings/rng/
 F:	Documentation/admin-guide/hw_random.rst
+F:	Documentation/devicetree/bindings/rng/
 F:	drivers/char/hw_random/
 F:	include/linux/hw_random.h
 
-HARDWARE TRACING FACILITIES
-M:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
-S:	Maintained
-F:	drivers/hwtracing/
-
 HARDWARE SPINLOCK CORE
 M:	Ohad Ben-Cohen <ohad@wizery.com>
 M:	Bjorn Andersson <bjorn.andersson@linaro.org>
@@ -7466,6 +7503,11 @@
 F:	drivers/hwspinlock/
 F:	include/linux/hwspinlock.h
 
+HARDWARE TRACING FACILITIES
+M:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+S:	Maintained
+F:	drivers/hwtracing/
+
 HARMONY SOUND DRIVER
 L:	linux-parisc@vger.kernel.org
 S:	Maintained
@@ -7474,9 +7516,9 @@
 HDPVR USB VIDEO ENCODER DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
-W:	https://linuxtv.org
 S:	Odd Fixes
+W:	https://linuxtv.org
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/usb/hdpvr/
 
 HEWLETT PACKARD ENTERPRISE ILO NMI WATCHDOG DRIVER
@@ -7490,7 +7532,7 @@
 L:	esc.storagedev@microsemi.com
 L:	linux-scsi@vger.kernel.org
 S:	Supported
-F:	Documentation/scsi/hpsa.txt
+F:	Documentation/scsi/hpsa.rst
 F:	drivers/scsi/hpsa*.[ch]
 F:	include/linux/cciss*.h
 F:	include/uapi/linux/cciss*.h
@@ -7517,30 +7559,30 @@
 HGA FRAMEBUFFER DRIVER
 M:	Ferenc Bakonyi <fero@drama.obuda.kando.hu>
 L:	linux-nvidia@lists.surfsouth.com
-W:	http://drama.obuda.kando.hu/~fero/cgi-bin/hgafb.shtml
 S:	Maintained
+W:	http://drama.obuda.kando.hu/~fero/cgi-bin/hgafb.shtml
 F:	drivers/video/fbdev/hgafb.c
 
 HIBERNATION (aka Software Suspend, aka swsusp)
 M:	"Rafael J. Wysocki" <rjw@rjwysocki.net>
 M:	Pavel Machek <pavel@ucw.cz>
 L:	linux-pm@vger.kernel.org
-B:	https://bugzilla.kernel.org
 S:	Supported
+B:	https://bugzilla.kernel.org
+F:	arch/*/include/asm/suspend*.h
 F:	arch/x86/power/
 F:	drivers/base/power/
-F:	kernel/power/
-F:	include/linux/suspend.h
 F:	include/linux/freezer.h
 F:	include/linux/pm.h
-F:	arch/*/include/asm/suspend*.h
+F:	include/linux/suspend.h
+F:	kernel/power/
 
 HID CORE LAYER
 M:	Jiri Kosina <jikos@kernel.org>
 M:	Benjamin Tissoires <benjamin.tissoires@redhat.com>
 L:	linux-input@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid.git
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid.git
 F:	drivers/hid/
 F:	include/linux/hid*
 F:	include/uapi/linux/hid*
@@ -7560,14 +7602,14 @@
 HIGH-RESOLUTION TIMERS, CLOCKEVENTS
 M:	Thomas Gleixner <tglx@linutronix.de>
 L:	linux-kernel@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core
 F:	Documentation/timers/
-F:	kernel/time/hrtimer.c
-F:	kernel/time/clockevents.c
-F:	kernel/time/timer_*.c
 F:	include/linux/clockchips.h
 F:	include/linux/hrtimer.h
+F:	kernel/time/clockevents.c
+F:	kernel/time/hrtimer.c
+F:	kernel/time/timer_*.c
 
 HIGH-SPEED SCC DRIVER FOR AX.25
 L:	linux-hams@vger.kernel.org
@@ -7577,19 +7619,19 @@
 
 HIGHPOINT ROCKETRAID 3xxx RAID DRIVER
 M:	HighPoint Linux Team <linux@highpoint-tech.com>
-W:	http://www.highpoint-tech.com
 S:	Supported
-F:	Documentation/scsi/hptiop.txt
+W:	http://www.highpoint-tech.com
+F:	Documentation/scsi/hptiop.rst
 F:	drivers/scsi/hptiop.c
 
 HIPPI
 M:	Jes Sorensen <jes@trained-monkey.org>
 L:	linux-hippi@sunsite.dk
 S:	Maintained
+F:	drivers/net/hippi/
 F:	include/linux/hippidevice.h
 F:	include/uapi/linux/if_hippi.h
 F:	net/802/hippi.c
-F:	drivers/net/hippi/
 
 HISILICON DMA DRIVER
 M:	Zhou Wang <wangzhou1@hisilicon.com>
@@ -7597,60 +7639,55 @@
 S:	Maintained
 F:	drivers/dma/hisi_dma.c
 
-HISILICON SECURITY ENGINE V2 DRIVER (SEC2)
-M:	Zaibo Xu <xuzaibo@huawei.com>
-L:	linux-crypto@vger.kernel.org
-S:	Maintained
-F:	drivers/crypto/hisilicon/sec2/sec_crypto.c
-F:	drivers/crypto/hisilicon/sec2/sec_main.c
-F:	drivers/crypto/hisilicon/sec2/sec_crypto.h
-F:	drivers/crypto/hisilicon/sec2/sec.h
-F:	Documentation/ABI/testing/debugfs-hisi-sec
-
 HISILICON HIGH PERFORMANCE RSA ENGINE DRIVER (HPRE)
 M:	Zaibo Xu <xuzaibo@huawei.com>
 L:	linux-crypto@vger.kernel.org
 S:	Maintained
+F:	Documentation/ABI/testing/debugfs-hisi-hpre
+F:	drivers/crypto/hisilicon/hpre/hpre.h
 F:	drivers/crypto/hisilicon/hpre/hpre_crypto.c
 F:	drivers/crypto/hisilicon/hpre/hpre_main.c
-F:	drivers/crypto/hisilicon/hpre/hpre.h
-F:	Documentation/ABI/testing/debugfs-hisi-hpre
+
+HISILICON LPC BUS DRIVER
+M:	john.garry@huawei.com
+S:	Maintained
+W:	http://www.hisilicon.com
+F:	Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt
+F:	drivers/bus/hisi_lpc.c
 
 HISILICON NETWORK SUBSYSTEM 3 DRIVER (HNS3)
 M:	Yisen Zhuang <yisen.zhuang@huawei.com>
 M:	Salil Mehta <salil.mehta@huawei.com>
 L:	netdev@vger.kernel.org
-W:	http://www.hisilicon.com
 S:	Maintained
+W:	http://www.hisilicon.com
 F:	drivers/net/ethernet/hisilicon/hns3/
 
-HISILICON TRUE RANDOM NUMBER GENERATOR V2 SUPPORT
-M:	Zaibo Xu <xuzaibo@huawei.com>
-S:	Maintained
-F:	drivers/char/hw_random/hisi-trng-v2.c
-
-HISILICON LPC BUS DRIVER
-M:	john.garry@huawei.com
-W:	http://www.hisilicon.com
-S:	Maintained
-F:	drivers/bus/hisi_lpc.c
-F:	Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt
-
 HISILICON NETWORK SUBSYSTEM DRIVER
 M:	Yisen Zhuang <yisen.zhuang@huawei.com>
 M:	Salil Mehta <salil.mehta@huawei.com>
 L:	netdev@vger.kernel.org
-W:	http://www.hisilicon.com
 S:	Maintained
-F:	drivers/net/ethernet/hisilicon/
+W:	http://www.hisilicon.com
 F:	Documentation/devicetree/bindings/net/hisilicon*.txt
+F:	drivers/net/ethernet/hisilicon/
 
 HISILICON PMU DRIVER
 M:	Shaokun Zhang <zhangshaokun@hisilicon.com>
-W:	http://www.hisilicon.com
 S:	Supported
-F:	drivers/perf/hisilicon
+W:	http://www.hisilicon.com
 F:	Documentation/admin-guide/perf/hisi-pmu.rst
+F:	drivers/perf/hisilicon
+
+HISILICON QM AND ZIP Controller DRIVER
+M:	Zhou Wang <wangzhou1@hisilicon.com>
+L:	linux-crypto@vger.kernel.org
+S:	Maintained
+F:	Documentation/ABI/testing/debugfs-hisi-zip
+F:	drivers/crypto/hisilicon/qm.c
+F:	drivers/crypto/hisilicon/qm.h
+F:	drivers/crypto/hisilicon/sgl.c
+F:	drivers/crypto/hisilicon/zip/
 
 HISILICON ROCE DRIVER
 M:	Lijun Ou <oulijun@huawei.com>
@@ -7658,45 +7695,50 @@
 M:	Weihang Li <liweihang@huawei.com>
 L:	linux-rdma@vger.kernel.org
 S:	Maintained
-F:	drivers/infiniband/hw/hns/
 F:	Documentation/devicetree/bindings/infiniband/hisilicon-hns-roce.txt
+F:	drivers/infiniband/hw/hns/
 
 HISILICON SAS Controller
 M:	John Garry <john.garry@huawei.com>
-W:	http://www.hisilicon.com
 S:	Supported
-F:	drivers/scsi/hisi_sas/
+W:	http://www.hisilicon.com
 F:	Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
+F:	drivers/scsi/hisi_sas/
+
+HISILICON SECURITY ENGINE V2 DRIVER (SEC2)
+M:	Zaibo Xu <xuzaibo@huawei.com>
+L:	linux-crypto@vger.kernel.org
+S:	Maintained
+F:	Documentation/ABI/testing/debugfs-hisi-sec
+F:	drivers/crypto/hisilicon/sec2/sec.h
+F:	drivers/crypto/hisilicon/sec2/sec_crypto.c
+F:	drivers/crypto/hisilicon/sec2/sec_crypto.h
+F:	drivers/crypto/hisilicon/sec2/sec_main.c
+
+HISILICON TRUE RANDOM NUMBER GENERATOR V2 SUPPORT
+M:	Zaibo Xu <xuzaibo@huawei.com>
+S:	Maintained
+F:	drivers/char/hw_random/hisi-trng-v2.c
 
 HISILICON V3XX SPI NOR FLASH Controller Driver
 M:	John Garry <john.garry@huawei.com>
+S:	Maintained
 W:	http://www.hisilicon.com
-S:	Maintained
 F:	drivers/spi/spi-hisi-sfc-v3xx.c
 
-HISILICON QM AND ZIP Controller DRIVER
-M:	Zhou Wang <wangzhou1@hisilicon.com>
-L:	linux-crypto@vger.kernel.org
-S:	Maintained
-F:	drivers/crypto/hisilicon/qm.c
-F:	drivers/crypto/hisilicon/qm.h
-F:	drivers/crypto/hisilicon/sgl.c
-F:	drivers/crypto/hisilicon/zip/
-F:	Documentation/ABI/testing/debugfs-hisi-zip
-
 HMM - Heterogeneous Memory Management
 M:	Jérôme Glisse <jglisse@redhat.com>
 L:	linux-mm@kvack.org
 S:	Maintained
-F:	mm/hmm*
-F:	include/linux/hmm*
 F:	Documentation/vm/hmm.rst
+F:	include/linux/hmm*
+F:	mm/hmm*
 
 HOST AP DRIVER
 M:	Jouni Malinen <j@w1.fi>
 L:	linux-wireless@vger.kernel.org
-W:	http://w1.fi/hostap-driver.html
 S:	Obsolete
+W:	http://w1.fi/hostap-driver.html
 F:	drivers/net/wireless/intersil/hostap/
 
 HP COMPAQ TC1100 TABLET WMI EXTRAS DRIVER
@@ -7719,19 +7761,19 @@
 
 HPET:	x86
 S:	Orphan
-F:	arch/x86/kernel/hpet.c
 F:	arch/x86/include/asm/hpet.h
+F:	arch/x86/kernel/hpet.c
 
 HPFS FILESYSTEM
 M:	Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
-W:	http://artax.karlin.mff.cuni.cz/~mikulas/vyplody/hpfs/index-e.cgi
 S:	Maintained
+W:	http://artax.karlin.mff.cuni.cz/~mikulas/vyplody/hpfs/index-e.cgi
 F:	fs/hpfs/
 
 HSI SUBSYSTEM
 M:	Sebastian Reichel <sre@kernel.org>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi.git
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi.git
 F:	Documentation/ABI/testing/sysfs-bus-hsi
 F:	Documentation/driver-api/hsi.rst
 F:	drivers/hsi/
@@ -7751,8 +7793,8 @@
 HT16K33 LED CONTROLLER DRIVER
 M:	Robin van der Gracht <robin@protonic.nl>
 S:	Maintained
-F:	drivers/auxdisplay/ht16k33.c
 F:	Documentation/devicetree/bindings/display/ht16k33.txt
+F:	drivers/auxdisplay/ht16k33.c
 
 HTCPEN TOUCHSCREEN DRIVER
 M:	Pau Oliva Fora <pof@eslack.org>
@@ -7763,10 +7805,10 @@
 HTS221 TEMPERATURE-HUMIDITY IIO DRIVER
 M:	Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
 L:	linux-iio@vger.kernel.org
-W:	http://www.st.com/
 S:	Maintained
-F:	drivers/iio/humidity/hts221*
+W:	http://www.st.com/
 F:	Documentation/devicetree/bindings/iio/humidity/hts221.txt
+F:	drivers/iio/humidity/hts221*
 
 HUAWEI ETHERNET DRIVER
 M:	Aviad Krawczyk <aviad.krawczyk@huawei.com>
@@ -7779,27 +7821,27 @@
 M:	Mike Kravetz <mike.kravetz@oracle.com>
 L:	linux-mm@kvack.org
 S:	Maintained
-F:	fs/hugetlbfs/
-F:	mm/hugetlb.c
-F:	include/linux/hugetlb.h
+F:	Documentation/ABI/testing/sysfs-kernel-mm-hugepages
 F:	Documentation/admin-guide/mm/hugetlbpage.rst
 F:	Documentation/vm/hugetlbfs_reserv.rst
-F:	Documentation/ABI/testing/sysfs-kernel-mm-hugepages
+F:	fs/hugetlbfs/
+F:	include/linux/hugetlb.h
+F:	mm/hugetlb.c
 
 HVA ST MEDIA DRIVER
 M:	Jean-Christophe Trotin <jean-christophe.trotin@st.com>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
-W:	https://linuxtv.org
 S:	Supported
+W:	https://linuxtv.org
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/platform/sti/hva
 
 HWPOISON MEMORY FAILURE HANDLING
 M:	Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
 L:	linux-mm@kvack.org
 S:	Maintained
-F:	mm/memory-failure.c
 F:	mm/hwpoison-inject.c
+F:	mm/memory-failure.c
 
 HYGON PROCESSOR SUPPORT
 M:	Pu Wen <puwen@hygon.cn>
@@ -7810,8 +7852,8 @@
 HYNIX HI556 SENSOR DRIVER
 M:	Shawn Tu <shawnx.tu@intel.com>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/i2c/hi556.c
 
 Hyper-V CORE AND DRIVERS
@@ -7819,42 +7861,46 @@
 M:	Haiyang Zhang <haiyangz@microsoft.com>
 M:	Stephen Hemminger <sthemmin@microsoft.com>
 M:	Wei Liu <wei.liu@kernel.org>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux.git
 L:	linux-hyperv@vger.kernel.org
 S:	Supported
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux.git
+F:	Documentation/ABI/stable/sysfs-bus-vmbus
+F:	Documentation/ABI/testing/debugfs-hyperv
 F:	Documentation/networking/device_drivers/microsoft/netvsc.txt
+F:	arch/x86/hyperv
+F:	arch/x86/include/asm/hyperv-tlfs.h
 F:	arch/x86/include/asm/mshyperv.h
 F:	arch/x86/include/asm/trace/hyperv.h
-F:	arch/x86/include/asm/hyperv-tlfs.h
 F:	arch/x86/kernel/cpu/mshyperv.c
-F:	arch/x86/hyperv
 F:	drivers/clocksource/hyperv_timer.c
 F:	drivers/hid/hid-hyperv.c
 F:	drivers/hv/
 F:	drivers/input/serio/hyperv-keyboard.c
-F:	drivers/pci/controller/pci-hyperv.c
-F:	drivers/pci/controller/pci-hyperv-intf.c
+F:	drivers/iommu/hyperv-iommu.c
 F:	drivers/net/hyperv/
+F:	drivers/pci/controller/pci-hyperv-intf.c
+F:	drivers/pci/controller/pci-hyperv.c
 F:	drivers/scsi/storvsc_drv.c
 F:	drivers/uio/uio_hv_generic.c
 F:	drivers/video/fbdev/hyperv_fb.c
-F:	drivers/iommu/hyperv-iommu.c
-F:	net/vmw_vsock/hyperv_transport.c
+F:	include/asm-generic/mshyperv.h
 F:	include/clocksource/hyperv_timer.h
 F:	include/linux/hyperv.h
 F:	include/uapi/linux/hyperv.h
-F:	include/asm-generic/mshyperv.h
+F:	net/vmw_vsock/hyperv_transport.c
 F:	tools/hv/
-F:	Documentation/ABI/stable/sysfs-bus-vmbus
-F:	Documentation/ABI/testing/debugfs-hyperv
 
 HYPERBUS SUPPORT
 M:	Vignesh Raghavendra <vigneshr@ti.com>
+L:	linux-mtd@lists.infradead.org
 S:	Supported
-F:	drivers/mtd/hyperbus/
-F:	include/linux/mtd/hyperbus.h
+Q:	http://patchwork.ozlabs.org/project/linux-mtd/list/
+C:	irc://irc.oftc.net/mtd
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git cfi/next
 F:	Documentation/devicetree/bindings/mtd/cypress,hyperflash.txt
 F:	Documentation/devicetree/bindings/mtd/ti,am654-hbmc.txt
+F:	drivers/mtd/hyperbus/
+F:	include/linux/mtd/hyperbus.h
 
 HYPERVISOR VIRTUAL CONSOLE DRIVER
 L:	linuxppc-dev@lists.ozlabs.org
@@ -7879,11 +7925,11 @@
 M:	Peter Rosin <peda@axentia.se>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
-F:	Documentation/i2c/i2c-topology.rst
-F:	Documentation/i2c/muxes/
-F:	Documentation/devicetree/bindings/i2c/i2c-mux*
 F:	Documentation/devicetree/bindings/i2c/i2c-arb*
 F:	Documentation/devicetree/bindings/i2c/i2c-gate*
+F:	Documentation/devicetree/bindings/i2c/i2c-mux*
+F:	Documentation/i2c/i2c-topology.rst
+F:	Documentation/i2c/muxes/
 F:	drivers/i2c/i2c-mux.c
 F:	drivers/i2c/muxes/
 F:	include/linux/i2c-mux.h
@@ -7905,25 +7951,25 @@
 I2C SUBSYSTEM
 M:	Wolfram Sang <wsa@the-dreams.de>
 L:	linux-i2c@vger.kernel.org
+S:	Maintained
 W:	https://i2c.wiki.kernel.org/
 Q:	https://patchwork.ozlabs.org/project/linux-i2c/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git
-S:	Maintained
 F:	Documentation/devicetree/bindings/i2c/i2c.txt
 F:	Documentation/i2c/
 F:	drivers/i2c/*
-F:	include/linux/i2c.h
 F:	include/linux/i2c-dev.h
 F:	include/linux/i2c-smbus.h
-F:	include/uapi/linux/i2c.h
+F:	include/linux/i2c.h
 F:	include/uapi/linux/i2c-*.h
+F:	include/uapi/linux/i2c.h
 
 I2C SUBSYSTEM HOST DRIVERS
 L:	linux-i2c@vger.kernel.org
+S:	Odd Fixes
 W:	https://i2c.wiki.kernel.org/
 Q:	https://patchwork.ozlabs.org/project/linux-i2c/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git
-S:	Odd Fixes
 F:	Documentation/devicetree/bindings/i2c/
 F:	drivers/i2c/algos/
 F:	drivers/i2c/busses/
@@ -7938,8 +7984,8 @@
 I2C-TINY-USB DRIVER
 M:	Till Harbaum <till@harbaum.org>
 L:	linux-i2c@vger.kernel.org
-W:	http://www.harbaum.org/till/i2c_tiny_usb
 S:	Maintained
+W:	http://www.harbaum.org/till/i2c_tiny_usb
 F:	drivers/i2c/busses/i2c-tiny-usb.c
 
 I2C/SMBUS CONTROLLER DRIVERS FOR PC
@@ -7962,13 +8008,13 @@
 F:	drivers/i2c/busses/i2c-ali1535.c
 F:	drivers/i2c/busses/i2c-ali1563.c
 F:	drivers/i2c/busses/i2c-ali15x3.c
-F:	drivers/i2c/busses/i2c-amd756.c
 F:	drivers/i2c/busses/i2c-amd756-s4882.c
+F:	drivers/i2c/busses/i2c-amd756.c
 F:	drivers/i2c/busses/i2c-amd8111.c
 F:	drivers/i2c/busses/i2c-i801.c
 F:	drivers/i2c/busses/i2c-isch.c
-F:	drivers/i2c/busses/i2c-nforce2.c
 F:	drivers/i2c/busses/i2c-nforce2-s4985.c
+F:	drivers/i2c/busses/i2c-nforce2.c
 F:	drivers/i2c/busses/i2c-piix4.c
 F:	drivers/i2c/busses/i2c-sis5595.c
 F:	drivers/i2c/busses/i2c-sis630.c
@@ -7986,8 +8032,8 @@
 M:	Seth Heasley <seth.heasley@intel.com>
 M:	Neil Horman <nhorman@tuxdriver.com>
 L:	linux-i2c@vger.kernel.org
-F:	drivers/i2c/busses/i2c-ismt.c
 F:	Documentation/i2c/busses/i2c-ismt.rst
+F:	drivers/i2c/busses/i2c-ismt.c
 
 I2C/SMBUS STUB DRIVER
 M:	Jean Delvare <jdelvare@suse.com>
@@ -7995,17 +8041,11 @@
 S:	Maintained
 F:	drivers/i2c/i2c-stub.c
 
-I3C SUBSYSTEM
-M:	Boris Brezillon <bbrezillon@kernel.org>
-L:	linux-i3c@lists.infradead.org (moderated for non-subscribers)
-C:	irc://chat.freenode.net/linux-i3c
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux.git
+I3C DRIVER FOR CADENCE I3C MASTER IP
+M:	Przemysław Gaj <pgaj@cadence.com>
 S:	Maintained
-F:	Documentation/ABI/testing/sysfs-bus-i3c
-F:	Documentation/devicetree/bindings/i3c/
-F:	Documentation/driver-api/i3c
-F:	drivers/i3c/
-F:	include/linux/i3c/
+F:	Documentation/devicetree/bindings/i3c/cdns,i3c-master.txt
+F:	drivers/i3c/master/i3c-master-cdns.c
 
 I3C DRIVER FOR SYNOPSYS DESIGNWARE
 M:	Vitor Soares <vitor.soares@synopsys.com>
@@ -8013,29 +8053,35 @@
 F:	Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
 F:	drivers/i3c/master/dw*
 
-I3C DRIVER FOR CADENCE I3C MASTER IP
-M:	Przemysław Gaj <pgaj@cadence.com>
+I3C SUBSYSTEM
+M:	Boris Brezillon <bbrezillon@kernel.org>
+L:	linux-i3c@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-F:	Documentation/devicetree/bindings/i3c/cdns,i3c-master.txt
-F:	drivers/i3c/master/i3c-master-cdns.c
+C:	irc://chat.freenode.net/linux-i3c
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux.git
+F:	Documentation/ABI/testing/sysfs-bus-i3c
+F:	Documentation/devicetree/bindings/i3c/
+F:	Documentation/driver-api/i3c
+F:	drivers/i3c/
+F:	include/linux/i3c/
 
 IA64 (Itanium) PLATFORM
 M:	Tony Luck <tony.luck@intel.com>
 M:	Fenghua Yu <fenghua.yu@intel.com>
 L:	linux-ia64@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux.git
 S:	Maintained
-F:	arch/ia64/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux.git
 F:	Documentation/ia64/
+F:	arch/ia64/
 
 IBM Power 842 compression accelerator
 M:	Haren Myneni <haren@us.ibm.com>
 S:	Supported
-F:	drivers/crypto/nx/Makefile
+F:	crypto/842.c
 F:	drivers/crypto/nx/Kconfig
+F:	drivers/crypto/nx/Makefile
 F:	drivers/crypto/nx/nx-842*
 F:	include/linux/sw842.h
-F:	crypto/842.c
 F:	lib/842/
 
 IBM Power in-Nest Crypto Acceleration
@@ -8044,19 +8090,33 @@
 M:	Paulo Flabiano Smorigo <pfsmorigo@gmail.com>
 L:	linux-crypto@vger.kernel.org
 S:	Supported
-F:	drivers/crypto/nx/Makefile
 F:	drivers/crypto/nx/Kconfig
+F:	drivers/crypto/nx/Makefile
 F:	drivers/crypto/nx/nx-aes*
 F:	drivers/crypto/nx/nx-sha*
 F:	drivers/crypto/nx/nx.*
 F:	drivers/crypto/nx/nx_csbcpb.h
 F:	drivers/crypto/nx/nx_debugfs.c
 
+IBM Power IO DLPAR Driver for RPA-compliant PPC64 platform
+M:	Tyrel Datwyler <tyreld@linux.ibm.com>
+L:	linux-pci@vger.kernel.org
+L:	linuxppc-dev@lists.ozlabs.org
+S:	Supported
+F:	drivers/pci/hotplug/rpadlpar*
+
 IBM Power Linux RAID adapter
 M:	Brian King <brking@us.ibm.com>
 S:	Supported
 F:	drivers/scsi/ipr.*
 
+IBM Power PCI Hotplug Driver for RPA-compliant PPC64 platform
+M:	Tyrel Datwyler <tyreld@linux.ibm.com>
+L:	linux-pci@vger.kernel.org
+L:	linuxppc-dev@lists.ozlabs.org
+S:	Supported
+F:	drivers/pci/hotplug/rpaphp*
+
 IBM Power SRIOV Virtual NIC Device Driver
 M:	Thomas Falcon <tlfalcon@linux.ibm.com>
 M:	John Allen <jallen@linux.ibm.com>
@@ -8068,9 +8128,9 @@
 M:	Sukadev Bhattiprolu <sukadev@linux.ibm.com>
 L:	linuxppc-dev@lists.ozlabs.org
 S:	Supported
-F:	arch/powerpc/platforms/powernv/vas*
-F:	arch/powerpc/platforms/powernv/copy-paste.h
 F:	arch/powerpc/include/asm/vas.h
+F:	arch/powerpc/platforms/powernv/copy-paste.h
+F:	arch/powerpc/platforms/powernv/vas*
 
 IBM Power Virtual Ethernet Device Driver
 M:	Thomas Falcon <tlfalcon@linux.ibm.com>
@@ -8109,26 +8169,12 @@
 M:	Paulo Flabiano Smorigo <pfsmorigo@gmail.com>
 L:	linux-crypto@vger.kernel.org
 S:	Supported
-F:	drivers/crypto/vmx/Makefile
 F:	drivers/crypto/vmx/Kconfig
-F:	drivers/crypto/vmx/vmx.c
+F:	drivers/crypto/vmx/Makefile
 F:	drivers/crypto/vmx/aes*
 F:	drivers/crypto/vmx/ghash*
 F:	drivers/crypto/vmx/ppc-xlate.pl
-
-IBM Power PCI Hotplug Driver for RPA-compliant PPC64 platform
-M:	Tyrel Datwyler <tyreld@linux.ibm.com>
-L:	linux-pci@vger.kernel.org
-L:	linuxppc-dev@lists.ozlabs.org
-S:	Supported
-F:	drivers/pci/hotplug/rpaphp*
-
-IBM Power IO DLPAR Driver for RPA-compliant PPC64 platform
-M:	Tyrel Datwyler <tyreld@linux.ibm.com>
-L:	linux-pci@vger.kernel.org
-L:	linuxppc-dev@lists.ozlabs.org
-S:	Supported
-F:	drivers/pci/hotplug/rpadlpar*
+F:	drivers/crypto/vmx/vmx.c
 
 IBM ServeRAID RAID DRIVER
 S:	Orphan
@@ -8149,9 +8195,9 @@
 IDE SUBSYSTEM
 M:	"David S. Miller" <davem@davemloft.net>
 L:	linux-ide@vger.kernel.org
+S:	Maintained
 Q:	http://patchwork.ozlabs.org/project/linux-ide/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide.git
-S:	Maintained
 F:	Documentation/ide/
 F:	drivers/ide/
 F:	include/linux/ide.h
@@ -8186,28 +8232,28 @@
 M:	Alexander Aring <alex.aring@gmail.com>
 M:	Stefan Schmidt <stefan@datenfreihafen.org>
 L:	linux-wpan@vger.kernel.org
+S:	Maintained
 W:	http://wpan.cakelab.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan-next.git
-S:	Maintained
-F:	net/ieee802154/
-F:	net/mac802154/
+F:	Documentation/networking/ieee802154.rst
 F:	drivers/net/ieee802154/
-F:	include/linux/nl802154.h
 F:	include/linux/ieee802154.h
-F:	include/net/nl802154.h
-F:	include/net/mac802154.h
+F:	include/linux/nl802154.h
 F:	include/net/af_ieee802154.h
 F:	include/net/cfg802154.h
 F:	include/net/ieee802154_netdev.h
-F:	Documentation/networking/ieee802154.rst
+F:	include/net/mac802154.h
+F:	include/net/nl802154.h
+F:	net/ieee802154/
+F:	net/mac802154/
 
 IFE PROTOCOL
 M:	Yotam Gigi <yotam.gi@gmail.com>
 M:	Jamal Hadi Salim <jhs@mojatatu.com>
-F:	net/ife
 F:	include/net/ife.h
 F:	include/uapi/linux/ife.h
+F:	net/ife
 
 IGORPLUG-USB IR RECEIVER
 M:	Sean Young <sean@mess.org>
@@ -8250,8 +8296,8 @@
 R:	Lars-Peter Clausen <lars@metafoo.de>
 R:	Peter Meerwald-Stadler <pmeerw@pmeerw.net>
 L:	linux-iio@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git
 F:	Documentation/ABI/testing/configfs-iio*
 F:	Documentation/ABI/testing/sysfs-bus-iio*
 F:	Documentation/devicetree/bindings/iio/
@@ -8289,8 +8335,8 @@
 M:	Sean Young <sean@mess.org>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-F:	drivers/media/rc/imon_raw.c
 F:	drivers/media/rc/imon.c
+F:	drivers/media/rc/imon_raw.c
 
 IMS TWINTURBO FRAMEBUFFER DRIVER
 L:	linux-fbdev@vger.kernel.org
@@ -8301,8 +8347,8 @@
 M:	Guenter Roeck <linux@roeck-us.net>
 L:	linux-hwmon@vger.kernel.org
 S:	Maintained
-F:	Documentation/hwmon/ina209.rst
 F:	Documentation/devicetree/bindings/hwmon/ina2xx.txt
+F:	Documentation/hwmon/ina209.rst
 F:	drivers/hwmon/ina209.c
 
 INA2XX HARDWARE MONITOR DRIVER
@@ -8318,32 +8364,32 @@
 M:	Jens Taprogge <jens.taprogge@taprogge.org>
 M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 L:	industrypack-devel@lists.sourceforge.net
-W:	http://industrypack.sourceforge.net
 S:	Maintained
+W:	http://industrypack.sourceforge.net
 F:	drivers/ipack/
 
 INFINEON DPS310 Driver
 M:	Eddie James <eajames@linux.ibm.com>
 L:	linux-iio@vger.kernel.org
-F:	drivers/iio/pressure/dps310.c
 S:	Maintained
+F:	drivers/iio/pressure/dps310.c
 
 INFINIBAND SUBSYSTEM
 M:	Doug Ledford <dledford@redhat.com>
 M:	Jason Gunthorpe <jgg@mellanox.com>
 L:	linux-rdma@vger.kernel.org
+S:	Supported
 W:	https://github.com/linux-rdma/rdma-core
 Q:	http://patchwork.kernel.org/project/linux-rdma/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git
-S:	Supported
 F:	Documentation/devicetree/bindings/infiniband/
 F:	Documentation/infiniband/
 F:	drivers/infiniband/
-F:	include/uapi/linux/if_infiniband.h
-F:	include/uapi/rdma/
 F:	include/rdma/
 F:	include/trace/events/ib_mad.h
 F:	include/trace/events/ib_umad.h
+F:	include/uapi/linux/if_infiniband.h
+F:	include/uapi/rdma/
 F:	samples/bpf/ibumad_kern.c
 F:	samples/bpf/ibumad_user.c
 
@@ -8382,8 +8428,8 @@
 F:	drivers/watchdog/jz4740_wdt.c
 F:	include/dt-bindings/iio/adc/ingenic,adc.h
 F:	include/linux/mfd/ingenic-tcu.h
-F:	sound/soc/jz4740/
 F:	sound/soc/codecs/jz47*
+F:	sound/soc/jz4740/
 
 INOTIFY
 M:	Jan Kara <jack@suse.cz>
@@ -8398,17 +8444,17 @@
 INPUT (KEYBOARD, MOUSE, JOYSTICK, TOUCHSCREEN) DRIVERS
 M:	Dmitry Torokhov <dmitry.torokhov@gmail.com>
 L:	linux-input@vger.kernel.org
+S:	Maintained
 Q:	http://patchwork.kernel.org/project/linux-input/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git
-S:	Maintained
-F:	drivers/input/
-F:	include/linux/input.h
-F:	include/uapi/linux/input.h
-F:	include/uapi/linux/input-event-codes.h
-F:	include/linux/input/
 F:	Documentation/devicetree/bindings/input/
 F:	Documentation/devicetree/bindings/serio/
 F:	Documentation/input/
+F:	drivers/input/
+F:	include/linux/input.h
+F:	include/linux/input/
+F:	include/uapi/linux/input-event-codes.h
+F:	include/uapi/linux/input.h
 
 INPUT MULTITOUCH (MT) PROTOCOL
 M:	Henrik Rydberg <rydberg@bitmath.org>
@@ -8420,16 +8466,16 @@
 
 INSIDE SECURE CRYPTO DRIVER
 M:	Antoine Tenart <antoine.tenart@bootlin.com>
-F:	drivers/crypto/inside-secure/
-S:	Maintained
 L:	linux-crypto@vger.kernel.org
+S:	Maintained
+F:	drivers/crypto/inside-secure/
 
 INTEGRITY MEASUREMENT ARCHITECTURE (IMA)
 M:	Mimi Zohar <zohar@linux.ibm.com>
 M:	Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
 L:	linux-integrity@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity.git
 S:	Supported
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity.git
 F:	security/integrity/ima/
 
 INTEL 810/815 FRAMEBUFFER DRIVER
@@ -8457,8 +8503,8 @@
 M:	Intel SCU Linux support <intel-linux-scu@intel.com>
 M:	Artur Paszkiewicz <artur.paszkiewicz@intel.com>
 L:	linux-scsi@vger.kernel.org
-T:	git git://git.code.sf.net/p/intel-sas/isci
 S:	Supported
+T:	git git://git.code.sf.net/p/intel-sas/isci
 F:	drivers/scsi/isci/
 
 INTEL CPU family model numbers
@@ -8473,38 +8519,38 @@
 M:	Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
 M:	Rodrigo Vivi <rodrigo.vivi@intel.com>
 L:	intel-gfx@lists.freedesktop.org
+S:	Supported
 W:	https://01.org/linuxgraphics/
+Q:	http://patchwork.freedesktop.org/project/intel-gfx/
 B:	https://gitlab.freedesktop.org/drm/intel/-/wikis/How-to-file-i915-bugs
 C:	irc://chat.freenode.net/intel-gfx
-Q:	http://patchwork.freedesktop.org/project/intel-gfx/
 T:	git git://anongit.freedesktop.org/drm-intel
-S:	Supported
+F:	Documentation/gpu/i915.rst
 F:	drivers/gpu/drm/i915/
 F:	include/drm/i915*
 F:	include/uapi/drm/i915_drm.h
-F:	Documentation/gpu/i915.rst
 
 INTEL ETHERNET DRIVERS
 M:	Jeff Kirsher <jeffrey.t.kirsher@intel.com>
 L:	intel-wired-lan@lists.osuosl.org (moderated for non-subscribers)
+S:	Supported
 W:	http://www.intel.com/support/feedback.htm
 W:	http://e1000.sourceforge.net/
 Q:	http://patchwork.ozlabs.org/project/intel-wired-lan/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue.git
-S:	Supported
 F:	Documentation/networking/device_drivers/intel/e100.rst
 F:	Documentation/networking/device_drivers/intel/e1000.rst
 F:	Documentation/networking/device_drivers/intel/e1000e.rst
 F:	Documentation/networking/device_drivers/intel/fm10k.rst
+F:	Documentation/networking/device_drivers/intel/i40e.rst
+F:	Documentation/networking/device_drivers/intel/iavf.rst
+F:	Documentation/networking/device_drivers/intel/ice.rst
 F:	Documentation/networking/device_drivers/intel/igb.rst
 F:	Documentation/networking/device_drivers/intel/igbvf.rst
 F:	Documentation/networking/device_drivers/intel/ixgb.rst
 F:	Documentation/networking/device_drivers/intel/ixgbe.rst
 F:	Documentation/networking/device_drivers/intel/ixgbevf.rst
-F:	Documentation/networking/device_drivers/intel/i40e.rst
-F:	Documentation/networking/device_drivers/intel/iavf.rst
-F:	Documentation/networking/device_drivers/intel/ice.rst
 F:	drivers/net/ethernet/intel/
 F:	drivers/net/ethernet/intel/*/
 F:	include/linux/avf/virtchnl.h
@@ -8534,9 +8580,9 @@
 M:	Zhi Wang <zhi.a.wang@intel.com>
 L:	intel-gvt-dev@lists.freedesktop.org
 L:	intel-gfx@lists.freedesktop.org
+S:	Supported
 W:	https://01.org/igvt-g
 T:	git https://github.com/intel/gvt-linux.git
-S:	Supported
 F:	drivers/gpu/drm/i915/gvt/
 
 INTEL HID EVENT DRIVER
@@ -8549,8 +8595,8 @@
 M:	Dave Jiang <dave.jiang@intel.com>
 R:	Dan Williams <dan.j.williams@intel.com>
 L:	dmaengine@vger.kernel.org
-Q:	https://patchwork.kernel.org/project/linux-dmaengine/list/
 S:	Supported
+Q:	https://patchwork.kernel.org/project/linux-dmaengine/list/
 F:	drivers/dma/ioat*
 
 INTEL IADX DRIVER
@@ -8564,9 +8610,9 @@
 M:	Jacob Pan <jacob.jun.pan@linux.intel.com>
 M:	Len Brown <lenb@kernel.org>
 L:	linux-pm@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux.git
-B:	https://bugzilla.kernel.org
 S:	Supported
+B:	https://bugzilla.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux.git
 F:	drivers/idle/intel_idle.c
 
 INTEL INTEGRATED SENSOR HUB DRIVER
@@ -8580,8 +8626,8 @@
 M:	David Woodhouse <dwmw2@infradead.org>
 M:	Lu Baolu <baolu.lu@linux.intel.com>
 L:	iommu@lists.linux-foundation.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
 S:	Supported
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
 F:	drivers/iommu/dmar.c
 F:	drivers/iommu/intel*.[ch]
 F:	include/linux/intel-iommu.h
@@ -8599,27 +8645,27 @@
 R:	Tian Shu Qiu <tian.shu.qiu@intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-F:	drivers/media/pci/intel/ipu3/
 F:	Documentation/media/uapi/v4l/pixfmt-srggb10-ipu3.rst
+F:	drivers/media/pci/intel/ipu3/
 
 INTEL IPU3 CSI-2 IMGU DRIVER
 M:	Sakari Ailus <sakari.ailus@linux.intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-F:	drivers/staging/media/ipu3/
 F:	Documentation/media/uapi/v4l/pixfmt-meta-intel-ipu3.rst
 F:	Documentation/media/v4l-drivers/ipu3.rst
 F:	Documentation/media/v4l-drivers/ipu3_rcb.svg
+F:	drivers/staging/media/ipu3/
 
 INTEL IXP4XX QMGR, NPE, ETHERNET and HSS SUPPORT
 M:	Krzysztof Halasa <khalasa@piap.pl>
 S:	Maintained
-F:	include/linux/soc/ixp4xx/qmgr.h
-F:	include/linux/soc/ixp4xx/npe.h
-F:	drivers/soc/ixp4xx/ixp4xx-qmgr.c
-F:	drivers/soc/ixp4xx/ixp4xx-npe.c
 F:	drivers/net/ethernet/xscale/ixp4xx_eth.c
 F:	drivers/net/wan/ixp4xx_hss.c
+F:	drivers/soc/ixp4xx/ixp4xx-npe.c
+F:	drivers/soc/ixp4xx/ixp4xx-qmgr.c
+F:	include/linux/soc/ixp4xx/npe.h
+F:	include/linux/soc/ixp4xx/qmgr.h
 
 INTEL IXP4XX RANDOM NUMBER GENERATOR SUPPORT
 M:	Deepak Saxena <dsaxena@plexity.net>
@@ -8630,11 +8676,11 @@
 M:	Tomas Winkler <tomas.winkler@intel.com>
 L:	linux-kernel@vger.kernel.org
 S:	Supported
-F:	include/uapi/linux/mei.h
-F:	include/linux/mei_cl_bus.h
+F:	Documentation/driver-api/mei/*
 F:	drivers/misc/mei/*
 F:	drivers/watchdog/mei_wdt.c
-F:	Documentation/driver-api/mei/*
+F:	include/linux/mei_cl_bus.h
+F:	include/uapi/linux/mei.h
 F:	samples/mei/*
 
 INTEL MENLOW THERMAL DRIVER
@@ -8726,12 +8772,12 @@
 M:	Richard Gong <richard.gong@linux.intel.com>
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
+F:	Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu
+F:	Documentation/devicetree/bindings/firmware/intel,stratix10-svc.txt
 F:	drivers/firmware/stratix10-rsu.c
 F:	drivers/firmware/stratix10-svc.c
 F:	include/linux/firmware/intel/stratix10-smc.h
 F:	include/linux/firmware/intel/stratix10-svc-client.h
-F:	Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu
-F:	Documentation/devicetree/bindings/firmware/intel,stratix10-svc.txt
 
 INTEL TELEMETRY DRIVER
 M:	Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
@@ -8765,9 +8811,9 @@
 M:	Luca Coelho <luciano.coelho@intel.com>
 M:	Intel Linux Wireless <linuxwifi@intel.com>
 L:	linux-wireless@vger.kernel.org
+S:	Supported
 W:	https://wireless.wiki.kernel.org/en/users/drivers/iwlwifi
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi.git
-S:	Supported
 F:	drivers/net/wireless/intel/iwlwifi/
 
 INTEL WIRELESS WIMAX CONNECTION 2400
@@ -8795,19 +8841,19 @@
 INTEL(R) TRUSTED EXECUTION TECHNOLOGY (TXT)
 M:	Ning Sun <ning.sun@intel.com>
 L:	tboot-devel@lists.sourceforge.net
+S:	Supported
 W:	http://tboot.sourceforge.net
 T:	hg http://tboot.hg.sourceforge.net:8000/hgroot/tboot/tboot
-S:	Supported
 F:	Documentation/x86/intel_txt.rst
-F:	include/linux/tboot.h
 F:	arch/x86/kernel/tboot.c
+F:	include/linux/tboot.h
 
 INTERCONNECT API
 M:	Georgi Djakov <georgi.djakov@linaro.org>
 L:	linux-pm@vger.kernel.org
 S:	Maintained
-F:	Documentation/driver-api/interconnect.rst
 F:	Documentation/devicetree/bindings/interconnect/
+F:	Documentation/driver-api/interconnect.rst
 F:	drivers/interconnect/
 F:	include/dt-bindings/interconnect/
 F:	include/linux/interconnect-provider.h
@@ -8817,8 +8863,8 @@
 M:	Linus Walleij <linus.walleij@linaro.org>
 L:	linux-iio@vger.kernel.org
 S:	Maintained
-F:	drivers/iio/gyro/mpu3050*
 F:	Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.txt
+F:	drivers/iio/gyro/mpu3050*
 
 IOC3 ETHERNET DRIVER
 M:	Ralf Baechle <ralf@linux-mips.org>
@@ -8833,40 +8879,40 @@
 M:	linux-fsdevel@vger.kernel.org
 L:	linux-xfs@vger.kernel.org
 L:	linux-fsdevel@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/fs/xfs/xfs-linux.git
 S:	Supported
+T:	git git://git.kernel.org/pub/scm/fs/xfs/xfs-linux.git
 F:	fs/iomap/
 F:	include/linux/iomap.h
 
 IOMMU DRIVERS
 M:	Joerg Roedel <joro@8bytes.org>
 L:	iommu@lists.linux-foundation.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
 F:	Documentation/devicetree/bindings/iommu/
 F:	drivers/iommu/
 F:	include/linux/iommu.h
-F:	include/linux/of_iommu.h
 F:	include/linux/iova.h
+F:	include/linux/of_iommu.h
 
 IO_URING
 M:	Jens Axboe <axboe@kernel.dk>
 L:	io-uring@vger.kernel.org
+S:	Maintained
 T:	git git://git.kernel.dk/linux-block
 T:	git git://git.kernel.dk/liburing
-S:	Maintained
-F:	fs/io_uring.c
 F:	fs/io-wq.c
 F:	fs/io-wq.h
+F:	fs/io_uring.c
 F:	include/uapi/linux/io_uring.h
 
 IPMI SUBSYSTEM
 M:	Corey Minyard <minyard@acm.org>
 L:	openipmi-developer@lists.sourceforge.net (moderated for non-subscribers)
-W:	http://openipmi.sourceforge.net/
 S:	Supported
-F:	Documentation/devicetree/bindings/ipmi/
+W:	http://openipmi.sourceforge.net/
 F:	Documentation/IPMI.txt
+F:	Documentation/devicetree/bindings/ipmi/
 F:	drivers/char/ipmi/
 F:	include/linux/ipmi*
 F:	include/uapi/linux/ipmi*
@@ -8874,8 +8920,8 @@
 IPS SCSI RAID DRIVER
 M:	Adaptec OEM Raid Solutions <aacraid@microsemi.com>
 L:	linux-scsi@vger.kernel.org
-W:	http://www.adaptec.com/
 S:	Maintained
+W:	http://www.adaptec.com/
 F:	drivers/scsi/ips*
 
 IPVS
@@ -8939,9 +8985,9 @@
 ISA RADIO MODULE
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
-W:	https://linuxtv.org
 S:	Maintained
+W:	https://linuxtv.org
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/radio/radio-isa*
 
 ISAPNP
@@ -8956,8 +9002,8 @@
 M:	Chris Leech <cleech@redhat.com>
 L:	open-iscsi@googlegroups.com
 L:	linux-scsi@vger.kernel.org
-W:	www.open-iscsi.com
 S:	Maintained
+W:	www.open-iscsi.com
 F:	drivers/scsi/*iscsi*
 F:	include/scsi/*iscsi*
 
@@ -8979,35 +9025,35 @@
 
 ISCSI EXTENSIONS FOR RDMA (ISER) TARGET
 M:	Sagi Grimberg <sagi@grimberg.me>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending.git master
 L:	linux-rdma@vger.kernel.org
 L:	target-devel@vger.kernel.org
 S:	Supported
 W:	http://www.linux-iscsi.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending.git master
 F:	drivers/infiniband/ulp/isert
 
-ISDN/mISDN SUBSYSTEM
-M:	Karsten Keil <isdn@linux-pingi.de>
-L:	isdn4linux@listserv.isdn4linux.de (subscribers-only)
-L:	netdev@vger.kernel.org
-W:	http://www.isdn4linux.de
-S:	Maintained
-F:	drivers/isdn/mISDN/
-F:	drivers/isdn/hardware/
-F:	drivers/isdn/Kconfig
-F:	drivers/isdn/Makefile
-
 ISDN/CMTP OVER BLUETOOTH
 M:	Karsten Keil <isdn@linux-pingi.de>
 L:	isdn4linux@listserv.isdn4linux.de (subscribers-only)
 L:	netdev@vger.kernel.org
-W:	http://www.isdn4linux.de
 S:	Odd Fixes
+W:	http://www.isdn4linux.de
 F:	Documentation/isdn/
 F:	drivers/isdn/capi/
-F:	net/bluetooth/cmtp/
 F:	include/linux/isdn/
 F:	include/uapi/linux/isdn/
+F:	net/bluetooth/cmtp/
+
+ISDN/mISDN SUBSYSTEM
+M:	Karsten Keil <isdn@linux-pingi.de>
+L:	isdn4linux@listserv.isdn4linux.de (subscribers-only)
+L:	netdev@vger.kernel.org
+S:	Maintained
+W:	http://www.isdn4linux.de
+F:	drivers/isdn/Kconfig
+F:	drivers/isdn/Makefile
+F:	drivers/isdn/hardware/
+F:	drivers/isdn/mISDN/
 
 IT87 HARDWARE MONITORING DRIVER
 M:	Jean Delvare <jdelvare@suse.com>
@@ -9019,19 +9065,19 @@
 IT913X MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
-S:	Maintained
 F:	drivers/media/tuners/it913x*
 
 IVTV VIDEO4LINUX DRIVER
 M:	Andy Walls <awalls@md.metrocast.net>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
-W:	https://linuxtv.org
 S:	Maintained
+W:	https://linuxtv.org
+T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/media/v4l-drivers/ivtv*
 F:	drivers/media/pci/ivtv/
 F:	include/uapi/linux/ivtv*
@@ -9039,31 +9085,31 @@
 IX2505V MEDIA DRIVER
 M:	Malcolm Priestley <tvboxspy@gmail.com>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
-S:	Maintained
 F:	drivers/media/dvb-frontends/ix2505v*
 
 JAILHOUSE HYPERVISOR INTERFACE
 M:	Jan Kiszka <jan.kiszka@siemens.com>
 L:	jailhouse-dev@googlegroups.com
 S:	Maintained
-F:	arch/x86/kernel/jailhouse.c
 F:	arch/x86/include/asm/jailhouse_para.h
+F:	arch/x86/kernel/jailhouse.c
 
 JC42.4 TEMPERATURE SENSOR DRIVER
 M:	Guenter Roeck <linux@roeck-us.net>
 L:	linux-hwmon@vger.kernel.org
 S:	Maintained
-F:	drivers/hwmon/jc42.c
 F:	Documentation/hwmon/jc42.rst
+F:	drivers/hwmon/jc42.c
 
 JFS FILESYSTEM
 M:	Dave Kleikamp <shaggy@kernel.org>
 L:	jfs-discussion@lists.sourceforge.net
+S:	Maintained
 W:	http://jfs.sourceforge.net/
 T:	git git://github.com/kleikamp/linux-shaggy.git
-S:	Maintained
 F:	Documentation/admin-guide/jfs.rst
 F:	fs/jfs/
 
@@ -9077,9 +9123,9 @@
 M:	David Woodhouse <dwmw2@infradead.org>
 M:	Richard Weinberger <richard@nod.at>
 L:	linux-mtd@lists.infradead.org
+S:	Odd Fixes
 W:	http://www.linux-mtd.infradead.org/doc/jffs2.html
 T:	git git://git.infradead.org/ubifs-2.6.git
-S:	Odd Fixes
 F:	fs/jffs2/
 F:	include/uapi/linux/jffs2.h
 
@@ -9122,9 +9168,9 @@
 R:	Dmitry Vyukov <dvyukov@google.com>
 L:	kasan-dev@googlegroups.com
 S:	Maintained
+F:	Documentation/dev-tools/kasan.rst
 F:	arch/*/include/asm/kasan.h
 F:	arch/*/mm/kasan_init*
-F:	Documentation/dev-tools/kasan.rst
 F:	include/linux/kasan*.h
 F:	lib/test_kasan.c
 F:	mm/kasan/
@@ -9132,28 +9178,28 @@
 
 KCONFIG
 M:	Masahiro Yamada <masahiroy@kernel.org>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild.git kconfig
 L:	linux-kbuild@vger.kernel.org
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild.git kconfig
 F:	Documentation/kbuild/kconfig*
-F:	scripts/kconfig/
 F:	scripts/Kconfig.include
+F:	scripts/kconfig/
 
 KDUMP
 M:	Dave Young <dyoung@redhat.com>
 M:	Baoquan He <bhe@redhat.com>
 R:	Vivek Goyal <vgoyal@redhat.com>
 L:	kexec@lists.infradead.org
-W:	http://lse.sourceforge.net/kdump/
 S:	Maintained
+W:	http://lse.sourceforge.net/kdump/
 F:	Documentation/admin-guide/kdump/
 
 KEENE FM RADIO TRANSMITTER DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
-W:	https://linuxtv.org
 S:	Maintained
+W:	https://linuxtv.org
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/radio/radio-keene*
 
 KERNEL AUTOMOUNTER
@@ -9165,56 +9211,56 @@
 KERNEL BUILD + files below scripts/ (unless maintained elsewhere)
 M:	Masahiro Yamada <masahiroy@kernel.org>
 M:	Michal Marek <michal.lkml@markovi.net>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild.git
 L:	linux-kbuild@vger.kernel.org
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild.git
 F:	Documentation/kbuild/
 F:	Makefile
+F:	scripts/*vmlinux*
 F:	scripts/Kbuild*
 F:	scripts/Makefile*
 F:	scripts/basic/
 F:	scripts/mk*
-F:	scripts/*vmlinux*
 F:	scripts/mod/
 F:	scripts/package/
 
 KERNEL JANITORS
 L:	kernel-janitors@vger.kernel.org
-W:	http://kernelnewbies.org/KernelJanitors
 S:	Odd Fixes
+W:	http://kernelnewbies.org/KernelJanitors
 
 KERNEL NFSD, SUNRPC, AND LOCKD SERVERS
 M:	"J. Bruce Fields" <bfields@fieldses.org>
 M:	Chuck Lever <chuck.lever@oracle.com>
 L:	linux-nfs@vger.kernel.org
+S:	Supported
 W:	http://nfs.sourceforge.net/
 T:	git git://linux-nfs.org/~bfields/linux.git
-S:	Supported
-F:	fs/nfsd/
-F:	include/uapi/linux/nfsd/
 F:	fs/lockd/
 F:	fs/nfs_common/
-F:	net/sunrpc/
+F:	fs/nfsd/
 F:	include/linux/lockd/
 F:	include/linux/sunrpc/
+F:	include/uapi/linux/nfsd/
 F:	include/uapi/linux/sunrpc/
+F:	net/sunrpc/
 
 KERNEL SELFTEST FRAMEWORK
 M:	Shuah Khan <shuah@kernel.org>
 M:	Shuah Khan <skhan@linuxfoundation.org>
 L:	linux-kselftest@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git
-Q:	https://patchwork.kernel.org/project/linux-kselftest/list/
 S:	Maintained
-F:	tools/testing/selftests/
+Q:	https://patchwork.kernel.org/project/linux-kselftest/list/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git
 F:	Documentation/dev-tools/kselftest*
+F:	tools/testing/selftests/
 
 KERNEL UNIT TESTING FRAMEWORK (KUnit)
 M:	Brendan Higgins <brendanhiggins@google.com>
 L:	linux-kselftest@vger.kernel.org
 L:	kunit-dev@googlegroups.com
-W:	https://google.github.io/kunit-docs/third_party/kernel/docs/
 S:	Maintained
+W:	https://google.github.io/kunit-docs/third_party/kernel/docs/
 F:	Documentation/dev-tools/kunit/
 F:	include/kunit/
 F:	lib/kunit/
@@ -9224,25 +9270,25 @@
 M:	Luis Chamberlain <mcgrof@kernel.org>
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
-F:	kernel/umh.c
 F:	include/linux/umh.h
+F:	kernel/umh.c
 
 KERNEL VIRTUAL MACHINE (KVM)
 M:	Paolo Bonzini <pbonzini@redhat.com>
 L:	kvm@vger.kernel.org
+S:	Supported
 W:	http://www.linux-kvm.org
 T:	git git://git.kernel.org/pub/scm/virt/kvm/kvm.git
-S:	Supported
 F:	Documentation/virt/kvm/
+F:	include/asm-generic/kvm*
+F:	include/kvm/iodev.h
+F:	include/linux/kvm*
 F:	include/trace/events/kvm.h
 F:	include/uapi/asm-generic/kvm*
 F:	include/uapi/linux/kvm*
-F:	include/asm-generic/kvm*
-F:	include/linux/kvm*
-F:	include/kvm/iodev.h
-F:	virt/kvm/*
 F:	tools/kvm/
 F:	tools/testing/selftests/kvm/
+F:	virt/kvm/*
 
 KERNEL VIRTUAL MACHINE FOR ARM64 (KVM/arm64)
 M:	Marc Zyngier <maz@kernel.org>
@@ -9251,50 +9297,51 @@
 R:	Suzuki K Poulose <suzuki.poulose@arm.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	kvmarm@lists.cs.columbia.edu
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm.git
 S:	Maintained
-F:	arch/arm64/include/uapi/asm/kvm*
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm.git
 F:	arch/arm64/include/asm/kvm*
+F:	arch/arm64/include/uapi/asm/kvm*
 F:	arch/arm64/kvm/
-F:	virt/kvm/arm/
 F:	include/kvm/arm_*
+F:	virt/kvm/arm/
 
 KERNEL VIRTUAL MACHINE FOR MIPS (KVM/mips)
 L:	linux-mips@vger.kernel.org
 L:	kvm@vger.kernel.org
 S:	Orphan
-F:	arch/mips/include/uapi/asm/kvm*
 F:	arch/mips/include/asm/kvm*
+F:	arch/mips/include/uapi/asm/kvm*
 F:	arch/mips/kvm/
 
 KERNEL VIRTUAL MACHINE FOR POWERPC (KVM/powerpc)
 M:	Paul Mackerras <paulus@ozlabs.org>
 L:	kvm-ppc@vger.kernel.org
+S:	Supported
 W:	http://www.linux-kvm.org/
 T:	git git://github.com/agraf/linux-2.6.git
-S:	Supported
-F:	arch/powerpc/include/uapi/asm/kvm*
 F:	arch/powerpc/include/asm/kvm*
-F:	arch/powerpc/kvm/
+F:	arch/powerpc/include/uapi/asm/kvm*
 F:	arch/powerpc/kernel/kvm*
+F:	arch/powerpc/kvm/
 
 KERNEL VIRTUAL MACHINE for s390 (KVM/s390)
 M:	Christian Borntraeger <borntraeger@de.ibm.com>
 M:	Janosch Frank <frankja@linux.ibm.com>
 R:	David Hildenbrand <david@redhat.com>
 R:	Cornelia Huck <cohuck@redhat.com>
+R:	Claudio Imbrenda <imbrenda@linux.ibm.com>
 L:	kvm@vger.kernel.org
+S:	Supported
 W:	http://www.ibm.com/developerworks/linux/linux390/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux.git
-S:	Supported
 F:	Documentation/virt/kvm/s390*
-F:	arch/s390/include/uapi/asm/kvm*
 F:	arch/s390/include/asm/gmap.h
 F:	arch/s390/include/asm/kvm*
+F:	arch/s390/include/uapi/asm/kvm*
 F:	arch/s390/kvm/
 F:	arch/s390/mm/gmap.c
-F:	tools/testing/selftests/kvm/s390x/
 F:	tools/testing/selftests/kvm/*/s390x/
+F:	tools/testing/selftests/kvm/s390x/
 
 KERNEL VIRTUAL MACHINE FOR X86 (KVM/x86)
 M:	Paolo Bonzini <pbonzini@redhat.com>
@@ -9304,34 +9351,34 @@
 R:	Jim Mattson <jmattson@google.com>
 R:	Joerg Roedel <joro@8bytes.org>
 L:	kvm@vger.kernel.org
+S:	Supported
 W:	http://www.linux-kvm.org
 T:	git git://git.kernel.org/pub/scm/virt/kvm/kvm.git
-S:	Supported
-F:	arch/x86/kvm/
-F:	arch/x86/kvm/*/
-F:	arch/x86/include/uapi/asm/kvm*
-F:	arch/x86/include/uapi/asm/vmx.h
-F:	arch/x86/include/uapi/asm/svm.h
 F:	arch/x86/include/asm/kvm*
 F:	arch/x86/include/asm/pvclock-abi.h
 F:	arch/x86/include/asm/svm.h
 F:	arch/x86/include/asm/vmx*.h
+F:	arch/x86/include/uapi/asm/kvm*
+F:	arch/x86/include/uapi/asm/svm.h
+F:	arch/x86/include/uapi/asm/vmx.h
 F:	arch/x86/kernel/kvm.c
 F:	arch/x86/kernel/kvmclock.c
+F:	arch/x86/kvm/
+F:	arch/x86/kvm/*/
 
 KERNFS
 M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 M:	Tejun Heo <tj@kernel.org>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core.git
 S:	Supported
-F:	include/linux/kernfs.h
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core.git
 F:	fs/kernfs/
+F:	include/linux/kernfs.h
 
 KEXEC
 M:	Eric Biederman <ebiederm@xmission.com>
-W:	http://kernel.org/pub/linux/utils/kernel/kexec/
 L:	kexec@lists.infradead.org
 S:	Maintained
+W:	http://kernel.org/pub/linux/utils/kernel/kexec/
 F:	include/linux/kexec.h
 F:	include/uapi/linux/kexec.h
 F:	kernel/kexec*
@@ -9363,21 +9410,21 @@
 L:	keyrings@vger.kernel.org
 S:	Maintained
 F:	Documentation/security/keys/core.rst
-F:	include/linux/key.h
+F:	include/keys/
 F:	include/linux/key-type.h
+F:	include/linux/key.h
 F:	include/linux/keyctl.h
 F:	include/uapi/linux/keyctl.h
-F:	include/keys/
 F:	security/keys/
 
 KGDB / KDB /debug_core
 M:	Jason Wessel <jason.wessel@windriver.com>
 M:	Daniel Thompson <daniel.thompson@linaro.org>
 R:	Douglas Anderson <dianders@chromium.org>
-W:	http://kgdb.wiki.kernel.org/
 L:	kgdb-bugreport@lists.sourceforge.net
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb.git
 S:	Maintained
+W:	http://kgdb.wiki.kernel.org/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb.git
 F:	Documentation/dev-tools/kgdb.rst
 F:	drivers/misc/kgdbts.c
 F:	drivers/tty/serial/kgdboc.c
@@ -9390,15 +9437,15 @@
 S:	Maintained
 F:	Documentation/dev-tools/kmemleak.rst
 F:	include/linux/kmemleak.h
-F:	mm/kmemleak.c
 F:	mm/kmemleak-test.c
+F:	mm/kmemleak.c
 
 KMOD KERNEL MODULE LOADER - USERMODE HELPER
 M:	Luis Chamberlain <mcgrof@kernel.org>
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
-F:	kernel/kmod.c
 F:	include/linux/kmod.h
+F:	kernel/kmod.c
 F:	lib/test_kmod.c
 F:	tools/testing/selftests/kmod/
 
@@ -9409,8 +9456,8 @@
 M:	Masami Hiramatsu <mhiramat@kernel.org>
 S:	Maintained
 F:	Documentation/kprobes.txt
-F:	include/linux/kprobes.h
 F:	include/asm-generic/kprobes.h
+F:	include/linux/kprobes.h
 F:	kernel/kprobes.c
 
 KS0108 LCD CONTROLLER DRIVER
@@ -9424,8 +9471,8 @@
 M:	David Ahern <dsahern@kernel.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	net/l3mdev
 F:	include/net/l3mdev.h
+F:	net/l3mdev
 
 L7 BPF FRAMEWORK
 M:	John Fastabend <john.fastabend@gmail.com>
@@ -9445,10 +9492,10 @@
 M:	Hauke Mehrtens <hauke@hauke-m.de>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	net/dsa/tag_gswip.c
-F:	drivers/net/ethernet/lantiq_xrx200.c
-F:	drivers/net/dsa/lantiq_pce.h
 F:	drivers/net/dsa/lantiq_gswip.c
+F:	drivers/net/dsa/lantiq_pce.h
+F:	drivers/net/ethernet/lantiq_xrx200.c
+F:	net/dsa/tag_gswip.c
 
 LANTIQ MIPS ARCHITECTURE
 M:	John Crispin <john@phrozen.org>
@@ -9468,7 +9515,7 @@
 M:	"James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
-F:	Documentation/scsi/53c700.txt
+F:	Documentation/scsi/53c700.rst
 F:	drivers/scsi/53c700*
 
 LEAKING_ADDRESSES
@@ -9484,9 +9531,9 @@
 M:	Pavel Machek <pavel@ucw.cz>
 R:	Dan Murphy <dmurphy@ti.com>
 L:	linux-leds@vger.kernel.org
+S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds.git
-S:	Maintained
 F:	Documentation/devicetree/bindings/leds/
 F:	drivers/leds/
 F:	include/linux/leds.h
@@ -9500,15 +9547,15 @@
 LEGO MINDSTORMS EV3
 R:	David Lechner <david@lechnology.com>
 S:	Maintained
-F:	arch/arm/boot/dts/da850-lego-ev3.dts
 F:	Documentation/devicetree/bindings/power/supply/lego_ev3_battery.txt
+F:	arch/arm/boot/dts/da850-lego-ev3.dts
 F:	drivers/power/supply/lego_ev3_battery.c
 
 LEGO USB Tower driver
 M:	Juergen Stuber <starblue@users.sourceforge.net>
 L:	legousb-devel@lists.sourceforge.net
-W:	http://legousb.sourceforge.net/
 S:	Maintained
+W:	http://legousb.sourceforge.net/
 F:	drivers/usb/misc/legousbtower.c
 
 LG LAPTOP EXTRAS
@@ -9522,45 +9569,45 @@
 LG2160 MEDIA DRIVER
 M:	Michael Krufky <mkrufky@linuxtv.org>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 W:	http://github.com/mkrufky
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/mkrufky/tuners.git
-S:	Maintained
 F:	drivers/media/dvb-frontends/lg2160.*
 
 LGDT3305 MEDIA DRIVER
 M:	Michael Krufky <mkrufky@linuxtv.org>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 W:	http://github.com/mkrufky
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/mkrufky/tuners.git
-S:	Maintained
 F:	drivers/media/dvb-frontends/lgdt3305.*
 
 LIBATA PATA ARASAN COMPACT FLASH CONTROLLER
 M:	Viresh Kumar <vireshk@kernel.org>
 L:	linux-ide@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git
 S:	Maintained
-F:	include/linux/pata_arasan_cf_data.h
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git
 F:	drivers/ata/pata_arasan_cf.c
+F:	include/linux/pata_arasan_cf_data.h
 
 LIBATA PATA DRIVERS
 M:	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
 M:	Jens Axboe <axboe@kernel.dk>
 L:	linux-ide@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git
 S:	Maintained
-F:	drivers/ata/pata_*.c
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git
 F:	drivers/ata/ata_generic.c
+F:	drivers/ata/pata_*.c
 
 LIBATA PATA FARADAY FTIDE010 AND GEMINI SATA BRIDGE DRIVERS
 M:	Linus Walleij <linus.walleij@linaro.org>
 L:	linux-ide@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git
 F:	drivers/ata/pata_ftide010.c
 F:	drivers/ata/sata_gemini.c
 F:	drivers/ata/sata_gemini.h
@@ -9569,8 +9616,8 @@
 M:	Hans de Goede <hdegoede@redhat.com>
 M:	Jens Axboe <axboe@kernel.dk>
 L:	linux-ide@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git
 F:	drivers/ata/ahci_platform.c
 F:	drivers/ata/libahci_platform.c
 F:	include/linux/ahci_platform.h
@@ -9578,19 +9625,19 @@
 LIBATA SATA PROMISE TX2/TX4 CONTROLLER DRIVER
 M:	Mikael Pettersson <mikpelinux@gmail.com>
 L:	linux-ide@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git
 F:	drivers/ata/sata_promise.*
 
 LIBATA SUBSYSTEM (Serial and Parallel ATA drivers)
 M:	Jens Axboe <axboe@kernel.dk>
 L:	linux-ide@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git
+F:	Documentation/devicetree/bindings/ata/
 F:	drivers/ata/
 F:	include/linux/ata.h
 F:	include/linux/libata.h
-F:	Documentation/devicetree/bindings/ata/
 
 LIBLOCKDEP
 M:	Sasha Levin <alexander.levin@microsoft.com>
@@ -9602,9 +9649,9 @@
 M:	Vishal Verma <vishal.l.verma@intel.com>
 M:	Dave Jiang <dave.jiang@intel.com>
 L:	linux-nvdimm@lists.01.org
-P:	Documentation/nvdimm/maintainer-entry-profile.rst
-Q:	https://patchwork.kernel.org/project/linux-nvdimm/list/
 S:	Supported
+Q:	https://patchwork.kernel.org/project/linux-nvdimm/list/
+P:	Documentation/nvdimm/maintainer-entry-profile.rst
 F:	drivers/nvdimm/blk.c
 F:	drivers/nvdimm/region_devs.c
 
@@ -9613,9 +9660,9 @@
 M:	Dan Williams <dan.j.williams@intel.com>
 M:	Dave Jiang <dave.jiang@intel.com>
 L:	linux-nvdimm@lists.01.org
-P:	Documentation/nvdimm/maintainer-entry-profile.rst
-Q:	https://patchwork.kernel.org/project/linux-nvdimm/list/
 S:	Supported
+Q:	https://patchwork.kernel.org/project/linux-nvdimm/list/
+P:	Documentation/nvdimm/maintainer-entry-profile.rst
 F:	drivers/nvdimm/btt*
 
 LIBNVDIMM PMEM: PERSISTENT MEMORY DRIVER
@@ -9623,18 +9670,18 @@
 M:	Vishal Verma <vishal.l.verma@intel.com>
 M:	Dave Jiang <dave.jiang@intel.com>
 L:	linux-nvdimm@lists.01.org
-P:	Documentation/nvdimm/maintainer-entry-profile.rst
-Q:	https://patchwork.kernel.org/project/linux-nvdimm/list/
 S:	Supported
+Q:	https://patchwork.kernel.org/project/linux-nvdimm/list/
+P:	Documentation/nvdimm/maintainer-entry-profile.rst
 F:	drivers/nvdimm/pmem*
 
 LIBNVDIMM: DEVICETREE BINDINGS
 M:	Oliver O'Halloran <oohall@gmail.com>
 L:	linux-nvdimm@lists.01.org
-Q:	https://patchwork.kernel.org/project/linux-nvdimm/list/
 S:	Supported
-F:	drivers/nvdimm/of_pmem.c
+Q:	https://patchwork.kernel.org/project/linux-nvdimm/list/
 F:	Documentation/devicetree/bindings/pmem/pmem-region.txt
+F:	drivers/nvdimm/of_pmem.c
 
 LIBNVDIMM: NON-VOLATILE MEMORY DEVICE SUBSYSTEM
 M:	Dan Williams <dan.j.williams@intel.com>
@@ -9642,15 +9689,16 @@
 M:	Dave Jiang <dave.jiang@intel.com>
 M:	Ira Weiny <ira.weiny@intel.com>
 L:	linux-nvdimm@lists.01.org
-P:	Documentation/nvdimm/maintainer-entry-profile.rst
-Q:	https://patchwork.kernel.org/project/linux-nvdimm/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm.git
 S:	Supported
-F:	drivers/nvdimm/*
+Q:	https://patchwork.kernel.org/project/linux-nvdimm/list/
+P:	Documentation/nvdimm/maintainer-entry-profile.rst
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm.git
 F:	drivers/acpi/nfit/*
-F:	include/linux/nd.h
+F:	drivers/nvdimm/*
 F:	include/linux/libnvdimm.h
+F:	include/linux/nd.h
 F:	include/uapi/linux/ndctl.h
+F:	tools/testing/nvdimm/
 
 LICENSES and SPDX stuff
 M:	Thomas Gleixner <tglx@linutronix.de>
@@ -9666,36 +9714,37 @@
 
 LIGHTNVM PLATFORM SUPPORT
 M:	Matias Bjorling <mb@lightnvm.io>
-W:	http://github/OpenChannelSSD
 L:	linux-block@vger.kernel.org
 S:	Maintained
+W:	http://github/OpenChannelSSD
 F:	drivers/lightnvm/
 F:	include/linux/lightnvm.h
 F:	include/uapi/linux/lightnvm.h
 
 LINUX FOR POWER MACINTOSH
 M:	Benjamin Herrenschmidt <benh@kernel.crashing.org>
-W:	http://www.penguinppc.org/
 L:	linuxppc-dev@lists.ozlabs.org
-S:	Maintained
+S:	Odd Fixes
 F:	arch/powerpc/platforms/powermac/
 F:	drivers/macintosh/
 
 LINUX FOR POWERPC (32-BIT AND 64-BIT)
-M:	Benjamin Herrenschmidt <benh@kernel.crashing.org>
-M:	Paul Mackerras <paulus@samba.org>
 M:	Michael Ellerman <mpe@ellerman.id.au>
-W:	https://github.com/linuxppc/linux/wiki
+R:	Benjamin Herrenschmidt <benh@kernel.crashing.org>
+R:	Paul Mackerras <paulus@samba.org>
 L:	linuxppc-dev@lists.ozlabs.org
+S:	Supported
+W:	https://github.com/linuxppc/wiki/wiki
 Q:	http://patchwork.ozlabs.org/project/linuxppc-dev/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux.git
-S:	Supported
 F:	Documentation/ABI/stable/sysfs-firmware-opal-*
+F:	Documentation/devicetree/bindings/i2c/i2c-opal.txt
 F:	Documentation/devicetree/bindings/powerpc/
 F:	Documentation/devicetree/bindings/rtc/rtc-opal.txt
-F:	Documentation/devicetree/bindings/i2c/i2c-opal.txt
 F:	Documentation/powerpc/
 F:	arch/powerpc/
+F:	drivers/*/*/*pasemi*
+F:	drivers/*/*pasemi*
 F:	drivers/char/tpm/tpm_ibmvtpm*
 F:	drivers/crypto/nx/
 F:	drivers/crypto/vmx/
@@ -9718,51 +9767,31 @@
 LINUX FOR POWERPC EMBEDDED MPC5XXX
 M:	Anatolij Gustschin <agust@denx.de>
 L:	linuxppc-dev@lists.ozlabs.org
-T:	git git://git.denx.de/linux-denx-agust.git
-S:	Maintained
+S:	Odd Fixes
 F:	arch/powerpc/platforms/512x/
 F:	arch/powerpc/platforms/52xx/
 
 LINUX FOR POWERPC EMBEDDED PPC4XX
-M:	Alistair Popple <alistair@popple.id.au>
-M:	Matt Porter <mporter@kernel.crashing.org>
-W:	http://www.penguinppc.org/
 L:	linuxppc-dev@lists.ozlabs.org
-S:	Maintained
+S:	Orphan
 F:	arch/powerpc/platforms/40x/
 F:	arch/powerpc/platforms/44x/
 
 LINUX FOR POWERPC EMBEDDED PPC83XX AND PPC85XX
 M:	Scott Wood <oss@buserror.net>
-M:	Kumar Gala <galak@kernel.crashing.org>
-W:	http://www.penguinppc.org/
 L:	linuxppc-dev@lists.ozlabs.org
+S:	Odd fixes
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/scottwood/linux.git
-S:	Maintained
+F:	Documentation/devicetree/bindings/powerpc/fsl/
 F:	arch/powerpc/platforms/83xx/
 F:	arch/powerpc/platforms/85xx/
-F:	Documentation/devicetree/bindings/powerpc/fsl/
 
 LINUX FOR POWERPC EMBEDDED PPC8XX
-M:	Vitaly Bordug <vitb@kernel.crashing.org>
-W:	http://www.penguinppc.org/
+M:	Christophe Leroy <christophe.leroy@c-s.fr>
 L:	linuxppc-dev@lists.ozlabs.org
 S:	Maintained
 F:	arch/powerpc/platforms/8xx/
 
-LINUX FOR POWERPC EMBEDDED XILINX VIRTEX
-L:	linuxppc-dev@lists.ozlabs.org
-S:	Orphan
-F:	arch/powerpc/*/*virtex*
-F:	arch/powerpc/*/*/*virtex*
-
-LINUX FOR POWERPC PA SEMI PWRFICIENT
-L:	linuxppc-dev@lists.ozlabs.org
-S:	Orphan
-F:	arch/powerpc/platforms/pasemi/
-F:	drivers/*/*pasemi*
-F:	drivers/*/*/*pasemi*
-
 LINUX KERNEL DUMP TEST MODULE (LKDTM)
 M:	Kees Cook <keescook@chromium.org>
 S:	Maintained
@@ -9786,12 +9815,12 @@
 L:	linux-arch@vger.kernel.org
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git dev
-F:	tools/memory-model/
 F:	Documentation/atomic_bitops.txt
 F:	Documentation/atomic_t.txt
 F:	Documentation/core-api/atomic_ops.rst
 F:	Documentation/core-api/refcount-vs-atomic.rst
 F:	Documentation/memory-barriers.txt
+F:	tools/memory-model/
 
 LIS3LV02D ACCELEROMETER DRIVER
 M:	Eric Piel <eric.piel@tremplin-utc.net>
@@ -9813,24 +9842,24 @@
 M:	Miroslav Benes <mbenes@suse.cz>
 M:	Petr Mladek <pmladek@suse.com>
 R:	Joe Lawrence <joe.lawrence@redhat.com>
+L:	live-patching@vger.kernel.org
 S:	Maintained
-F:	kernel/livepatch/
-F:	include/linux/livepatch.h
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching.git
+F:	Documentation/ABI/testing/sysfs-kernel-livepatch
+F:	Documentation/livepatch/
 F:	arch/x86/include/asm/livepatch.h
 F:	arch/x86/kernel/livepatch.c
-F:	Documentation/livepatch/
-F:	Documentation/ABI/testing/sysfs-kernel-livepatch
+F:	include/linux/livepatch.h
+F:	kernel/livepatch/
 F:	samples/livepatch/
 F:	tools/testing/selftests/livepatch/
-L:	live-patching@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching.git
 
 LLC (802.2)
 L:	netdev@vger.kernel.org
 S:	Odd fixes
 F:	include/linux/llc.h
-F:	include/uapi/linux/llc.h
 F:	include/net/llc*
+F:	include/uapi/linux/llc.h
 F:	net/llc/
 
 LM73 HARDWARE MONITOR DRIVER
@@ -9857,8 +9886,8 @@
 M:	Jean Delvare <jdelvare@suse.com>
 L:	linux-hwmon@vger.kernel.org
 S:	Maintained
-F:	Documentation/hwmon/lm90.rst
 F:	Documentation/devicetree/bindings/hwmon/lm90.txt
+F:	Documentation/hwmon/lm90.rst
 F:	drivers/hwmon/lm90.c
 F:	include/dt-bindings/thermal/lm90.h
 
@@ -9872,50 +9901,50 @@
 LME2510 MEDIA DRIVER
 M:	Malcolm Priestley <tvboxspy@gmail.com>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
-S:	Maintained
 F:	drivers/media/usb/dvb-usb-v2/lmedm04*
 
 LOADPIN SECURITY MODULE
 M:	Kees Cook <keescook@chromium.org>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git lsm/loadpin
 S:	Supported
-F:	security/loadpin/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git lsm/loadpin
 F:	Documentation/admin-guide/LSM/LoadPin.rst
+F:	security/loadpin/
 
 LOCKING PRIMITIVES
 M:	Peter Zijlstra <peterz@infradead.org>
 M:	Ingo Molnar <mingo@redhat.com>
 M:	Will Deacon <will@kernel.org>
 L:	linux-kernel@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git locking/core
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git locking/core
 F:	Documentation/locking/
-F:	include/linux/lockdep.h
-F:	include/linux/spinlock*.h
 F:	arch/*/include/asm/spinlock*.h
-F:	include/linux/rwlock*.h
+F:	include/linux/lockdep.h
 F:	include/linux/mutex*.h
+F:	include/linux/rwlock*.h
 F:	include/linux/rwsem*.h
 F:	include/linux/seqlock.h
-F:	lib/locking*.[ch]
+F:	include/linux/spinlock*.h
 F:	kernel/locking/
+F:	lib/locking*.[ch]
 X:	kernel/locking/locktorture.c
 
 LOGICAL DISK MANAGER SUPPORT (LDM, Windows 2000/XP/Vista Dynamic Disks)
 M:	"Richard Russon (FlatCap)" <ldm@flatcap.org>
 L:	linux-ntfs-dev@lists.sourceforge.net
-W:	http://www.linux-ntfs.org/content/view/19/37/
 S:	Maintained
+W:	http://www.linux-ntfs.org/content/view/19/37/
 F:	Documentation/admin-guide/ldm.rst
 F:	block/partitions/ldm.*
 
 LOGITECH HID GAMING KEYBOARDS
 M:	Hans de Goede <hdegoede@redhat.com>
 L:	linux-input@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid.git
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid.git
 F:	drivers/hid/hid-lg-g15.c
 
 LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI)
@@ -9924,8 +9953,8 @@
 M:	Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
 L:	MPT-FusionLinux.pdl@broadcom.com
 L:	linux-scsi@vger.kernel.org
-W:	http://www.avagotech.com/support/
 S:	Supported
+W:	http://www.avagotech.com/support/
 F:	drivers/message/fusion/
 F:	drivers/scsi/mpt3sas/
 
@@ -9942,13 +9971,24 @@
 F:	Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml
 F:	drivers/iio/dac/ltc1660.c
 
+LTC2947 HARDWARE MONITOR DRIVER
+M:	Nuno Sá <nuno.sa@analog.com>
+L:	linux-hwmon@vger.kernel.org
+S:	Supported
+W:	http://ez.analog.com/community/linux-device-drivers
+F:	Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
+F:	drivers/hwmon/ltc2947-core.c
+F:	drivers/hwmon/ltc2947-i2c.c
+F:	drivers/hwmon/ltc2947-spi.c
+F:	drivers/hwmon/ltc2947.h
+
 LTC2983 IIO TEMPERATURE DRIVER
 M:	Nuno Sá <nuno.sa@analog.com>
-W:	http://ez.analog.com/community/linux-device-drivers
 L:	linux-iio@vger.kernel.org
 S:	Supported
-F:	drivers/iio/temperature/ltc2983.c
+W:	http://ez.analog.com/community/linux-device-drivers
 F:	Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
+F:	drivers/iio/temperature/ltc2983.c
 
 LTC4261 HARDWARE MONITOR DRIVER
 M:	Guenter Roeck <linux@roeck-us.net>
@@ -9957,24 +9997,13 @@
 F:	Documentation/hwmon/ltc4261.rst
 F:	drivers/hwmon/ltc4261.c
 
-LTC2947 HARDWARE MONITOR DRIVER
-M:	Nuno Sá <nuno.sa@analog.com>
-W:	http://ez.analog.com/community/linux-device-drivers
-L:	linux-hwmon@vger.kernel.org
-S:	Supported
-F:	drivers/hwmon/ltc2947-core.c
-F:	drivers/hwmon/ltc2947-spi.c
-F:	drivers/hwmon/ltc2947-i2c.c
-F:	drivers/hwmon/ltc2947.h
-F:	Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
-
 LTC4306 I2C MULTIPLEXER DRIVER
 M:	Michael Hennerich <michael.hennerich@analog.com>
-W:	http://ez.analog.com/community/linux-device-drivers
 L:	linux-i2c@vger.kernel.org
 S:	Supported
-F:	drivers/i2c/muxes/i2c-mux-ltc4306.c
+W:	http://ez.analog.com/community/linux-device-drivers
 F:	Documentation/devicetree/bindings/i2c/i2c-mux-ltc4306.txt
+F:	drivers/i2c/muxes/i2c-mux-ltc4306.c
 
 LTP (Linux Test Project)
 M:	Mike Frysinger <vapier@gentoo.org>
@@ -9984,69 +10013,69 @@
 M:	Stanislav Kholmanskikh <stanislav.kholmanskikh@oracle.com>
 M:	Alexey Kodanev <alexey.kodanev@oracle.com>
 L:	ltp@lists.linux.it (subscribers-only)
+S:	Maintained
 W:	http://linux-test-project.github.io/
 T:	git git://github.com/linux-test-project/ltp.git
-S:	Maintained
 
 M68K ARCHITECTURE
 M:	Geert Uytterhoeven <geert@linux-m68k.org>
 L:	linux-m68k@lists.linux-m68k.org
+S:	Maintained
 W:	http://www.linux-m68k.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k.git
-S:	Maintained
 F:	arch/m68k/
 F:	drivers/zorro/
 
 M68K ON APPLE MACINTOSH
 M:	Joshua Thompson <funaho@jurai.org>
-W:	http://www.mac.linux-m68k.org/
 L:	linux-m68k@lists.linux-m68k.org
 S:	Maintained
+W:	http://www.mac.linux-m68k.org/
 F:	arch/m68k/mac/
 
 M68K ON HP9000/300
 M:	Philip Blundell <philb@gnu.org>
-W:	http://www.tazenda.demon.co.uk/phil/linux-hp
 S:	Maintained
+W:	http://www.tazenda.demon.co.uk/phil/linux-hp
 F:	arch/m68k/hp300/
 
 M88DS3103 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
-S:	Maintained
 F:	drivers/media/dvb-frontends/m88ds3103*
 
 M88RS2000 MEDIA DRIVER
 M:	Malcolm Priestley <tvboxspy@gmail.com>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
-S:	Maintained
 F:	drivers/media/dvb-frontends/m88rs2000*
 
 MA901 MASTERKIT USB FM RADIO DRIVER
 M:	Alexey Klimov <klimov.linux@gmail.com>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/radio/radio-ma901.c
 
 MAC80211
 M:	Johannes Berg <johannes@sipsolutions.net>
 L:	linux-wireless@vger.kernel.org
+S:	Maintained
 W:	http://wireless.kernel.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
-S:	Maintained
 F:	Documentation/networking/mac80211-injection.txt
+F:	Documentation/networking/mac80211_hwsim/mac80211_hwsim.rst
+F:	drivers/net/wireless/mac80211_hwsim.[ch]
 F:	include/net/mac80211.h
 F:	net/mac80211/
-F:	drivers/net/wireless/mac80211_hwsim.[ch]
-F:	Documentation/networking/mac80211_hwsim/mac80211_hwsim.rst
 
 MAILBOX API
 M:	Jassi Brar <jassisinghbrar@gmail.com>
@@ -10058,9 +10087,9 @@
 
 MAN-PAGES: MANUAL PAGES FOR LINUX -- Sections 2, 3, 4, 5, and 7
 M:	Michael Kerrisk <mtk.manpages@gmail.com>
-W:	http://www.kernel.org/doc/man-pages
 L:	linux-man@vger.kernel.org
 S:	Maintained
+W:	http://www.kernel.org/doc/man-pages
 
 MARDUK (CREATOR CI40) DEVICE TREE SUPPORT
 M:	Rahul Bedarkar <rahulbedarkar89@gmail.com>
@@ -10073,35 +10102,35 @@
 M:	Vivien Didelot <vivien.didelot@gmail.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/dsa/mv88e6xxx/
-F:	include/linux/platform_data/mv88e6xxx.h
 F:	Documentation/devicetree/bindings/net/dsa/marvell.txt
 F:	Documentation/networking/devlink/mv88e6xxx.rst
+F:	drivers/net/dsa/mv88e6xxx/
+F:	include/linux/platform_data/mv88e6xxx.h
+
+MARVELL ARMADA 3700 PHY DRIVERS
+M:	Miquel Raynal <miquel.raynal@bootlin.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt
+F:	Documentation/devicetree/bindings/phy/phy-mvebu-utmi.txt
+F:	drivers/phy/marvell/phy-mvebu-a3700-comphy.c
+F:	drivers/phy/marvell/phy-mvebu-a3700-utmi.c
 
 MARVELL ARMADA DRM SUPPORT
 M:	Russell King <linux@armlinux.org.uk>
 S:	Maintained
 T:	git git://git.armlinux.org.uk/~rmk/linux-arm.git drm-armada-devel
 T:	git git://git.armlinux.org.uk/~rmk/linux-arm.git drm-armada-fixes
+F:	Documentation/devicetree/bindings/display/armada/
 F:	drivers/gpu/drm/armada/
 F:	include/uapi/drm/armada_drm.h
-F:	Documentation/devicetree/bindings/display/armada/
-
-MARVELL ARMADA 3700 PHY DRIVERS
-M:	Miquel Raynal <miquel.raynal@bootlin.com>
-S:	Maintained
-F:	drivers/phy/marvell/phy-mvebu-a3700-comphy.c
-F:	drivers/phy/marvell/phy-mvebu-a3700-utmi.c
-F:	Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt
-F:	Documentation/devicetree/bindings/phy/phy-mvebu-utmi.txt
 
 MARVELL CRYPTO DRIVER
 M:	Boris Brezillon <bbrezillon@kernel.org>
 M:	Arnaud Ebalard <arno@natisbad.org>
 M:	Srujana Challa <schalla@marvell.com>
-F:	drivers/crypto/marvell/
-S:	Maintained
 L:	linux-crypto@vger.kernel.org
+S:	Maintained
+F:	drivers/crypto/marvell/
 
 MARVELL GIGABIT ETHERNET DRIVERS (skge/sky2)
 M:	Mirko Lindner <mlindner@marvell.com>
@@ -10163,8 +10192,27 @@
 M:	Miquel Raynal <miquel.raynal@bootlin.com>
 L:	linux-mtd@lists.infradead.org
 S:	Maintained
-F:	drivers/mtd/nand/raw/marvell_nand.c
 F:	Documentation/devicetree/bindings/mtd/marvell-nand.txt
+F:	drivers/mtd/nand/raw/marvell_nand.c
+
+MARVELL OCTEONTX2 PHYSICAL FUNCTION DRIVER
+M:	Sunil Goutham <sgoutham@marvell.com>
+M:	Geetha sowjanya <gakula@marvell.com>
+M:	Subbaraya Sundeep <sbhatta@marvell.com>
+M:	hariprasad <hkelam@marvell.com>
+L:	netdev@vger.kernel.org
+S:	Supported
+F:	drivers/net/ethernet/marvell/octeontx2/nic/
+
+MARVELL OCTEONTX2 RVU ADMIN FUNCTION DRIVER
+M:	Sunil Goutham <sgoutham@marvell.com>
+M:	Linu Cherian <lcherian@marvell.com>
+M:	Geetha sowjanya <gakula@marvell.com>
+M:	Jerin Jacob <jerinj@marvell.com>
+L:	netdev@vger.kernel.org
+S:	Supported
+F:	Documentation/networking/device_drivers/marvell/octeontx2.rst
+F:	drivers/net/ethernet/marvell/octeontx2/af/
 
 MARVELL SOC MMC/SD/SDIO CONTROLLER DRIVER
 M:	Nicolas Pitre <nico@fluxnic.net>
@@ -10175,34 +10223,15 @@
 M:	Tobias Waldekranz <tobias@waldekranz.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/phy/mdio-mvusb.c
 F:	Documentation/devicetree/bindings/net/marvell,mvusb.yaml
+F:	drivers/net/phy/mdio-mvusb.c
 
 MARVELL XENON MMC/SD/SDIO HOST CONTROLLER DRIVER
 M:	Hu Ziji <huziji@marvell.com>
 L:	linux-mmc@vger.kernel.org
 S:	Supported
-F:	drivers/mmc/host/sdhci-xenon*
 F:	Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt
-
-MARVELL OCTEONTX2 RVU ADMIN FUNCTION DRIVER
-M:	Sunil Goutham <sgoutham@marvell.com>
-M:	Linu Cherian <lcherian@marvell.com>
-M:	Geetha sowjanya <gakula@marvell.com>
-M:	Jerin Jacob <jerinj@marvell.com>
-L:	netdev@vger.kernel.org
-S:	Supported
-F:	drivers/net/ethernet/marvell/octeontx2/af/
-F:	Documentation/networking/device_drivers/marvell/octeontx2.rst
-
-MARVELL OCTEONTX2 PHYSICAL FUNCTION DRIVER
-M:	Sunil Goutham <sgoutham@marvell.com>
-M:	Geetha sowjanya <gakula@marvell.com>
-M:	Subbaraya Sundeep <sbhatta@marvell.com>
-M:	hariprasad <hkelam@marvell.com>
-L:	netdev@vger.kernel.org
-S:	Supported
-F:	drivers/net/ethernet/marvell/octeontx2/nic/
+F:	drivers/mmc/host/sdhci-xenon*
 
 MATROX FRAMEBUFFER DRIVER
 L:	linux-fbdev@vger.kernel.org
@@ -10220,8 +10249,8 @@
 MAX2175 SDR TUNER DRIVER
 M:	Ramesh Shanmugasundaram <rashanmu@gmail.com>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/devicetree/bindings/media/i2c/max2175.txt
 F:	Documentation/media/v4l-drivers/max2175.rst
 F:	drivers/media/i2c/max2175*
@@ -10237,8 +10266,8 @@
 M:	Guenter Roeck <linux@roeck-us.net>
 L:	linux-hwmon@vger.kernel.org
 S:	Maintained
-F:	Documentation/hwmon/max6697.rst
 F:	Documentation/devicetree/bindings/hwmon/max6697.txt
+F:	Documentation/hwmon/max6697.rst
 F:	drivers/hwmon/max6697.c
 F:	include/linux/platform_data/max6697.h
 
@@ -10262,20 +10291,20 @@
 S:	Maintained
 F:	Documentation/devicetree/bindings/*/*max77650.yaml
 F:	Documentation/devicetree/bindings/*/max77650*.yaml
-F:	include/linux/mfd/max77650.h
-F:	drivers/mfd/max77650.c
-F:	drivers/regulator/max77650-regulator.c
-F:	drivers/power/supply/max77650-charger.c
+F:	drivers/gpio/gpio-max77650.c
 F:	drivers/input/misc/max77650-onkey.c
 F:	drivers/leds/leds-max77650.c
-F:	drivers/gpio/gpio-max77650.c
+F:	drivers/mfd/max77650.c
+F:	drivers/power/supply/max77650-charger.c
+F:	drivers/regulator/max77650-regulator.c
+F:	include/linux/mfd/max77650.h
 
 MAXIM MAX77802 PMIC REGULATOR DEVICE DRIVER
 M:	Javier Martinez Canillas <javier@dowhile0.org>
 L:	linux-kernel@vger.kernel.org
 S:	Supported
-F:	drivers/regulator/max77802-regulator.c
 F:	Documentation/devicetree/bindings/*/*max77802.txt
+F:	drivers/regulator/max77802-regulator.c
 F:	include/dt-bindings/*/*max77802.h
 
 MAXIM MUIC CHARGER DRIVERS FOR EXYNOS BASED BOARDS
@@ -10292,17 +10321,17 @@
 M:	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
 L:	linux-kernel@vger.kernel.org
 S:	Supported
+F:	Documentation/devicetree/bindings/*/max77686.txt
+F:	Documentation/devicetree/bindings/clock/maxim,max77686.txt
+F:	Documentation/devicetree/bindings/mfd/max14577.txt
+F:	Documentation/devicetree/bindings/mfd/max77693.txt
 F:	drivers/*/max14577*.c
 F:	drivers/*/max77686*.c
 F:	drivers/*/max77693*.c
+F:	drivers/clk/clk-max77686.c
 F:	drivers/extcon/extcon-max14577.c
 F:	drivers/extcon/extcon-max77693.c
 F:	drivers/rtc/rtc-max77686.c
-F:	drivers/clk/clk-max77686.c
-F:	Documentation/devicetree/bindings/mfd/max14577.txt
-F:	Documentation/devicetree/bindings/*/max77686.txt
-F:	Documentation/devicetree/bindings/mfd/max77693.txt
-F:	Documentation/devicetree/bindings/clock/maxim,max77686.txt
 F:	include/linux/mfd/max14577*.h
 F:	include/linux/mfd/max77686*.h
 F:	include/linux/mfd/max77693*.h
@@ -10310,9 +10339,9 @@
 MAXIRADIO FM RADIO RECEIVER DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
-W:	https://linuxtv.org
 S:	Maintained
+W:	https://linuxtv.org
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/radio/radio-maxiradio*
 
 MCAN MMIO DEVICE DRIVER
@@ -10320,7 +10349,7 @@
 M:	Sriram Dash <sriram.dash@samsung.com>
 L:	linux-can@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/net/can/m_can.txt
+F:	Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
 F:	drivers/net/can/m_can/m_can.c
 F:	drivers/net/can/m_can/m_can.h
 F:	drivers/net/can/m_can/m_can_platform.c
@@ -10343,11 +10372,11 @@
 MCR20A IEEE-802.15.4 RADIO DRIVER
 M:	Xue Liu <liuxuenetmail@gmail.com>
 L:	linux-wpan@vger.kernel.org
-W:	https://github.com/xueliu/mcr20a-linux
 S:	Maintained
+W:	https://github.com/xueliu/mcr20a-linux
+F:	Documentation/devicetree/bindings/net/ieee802154/mcr20a.txt
 F:	drivers/net/ieee802154/mcr20a.c
 F:	drivers/net/ieee802154/mcr20a.h
-F:	Documentation/devicetree/bindings/net/ieee802154/mcr20a.txt
 
 MEASUREMENT COMPUTING CIO-DAC IIO DRIVER
 M:	William Breathitt Gray <vilhelm.gray@gmail.com>
@@ -10359,81 +10388,81 @@
 M:	Sakari Ailus <sakari.ailus@linux.intel.com>
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	linux-media@vger.kernel.org
+S:	Supported
 W:	https://www.linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
-S:	Supported
 F:	drivers/media/mc/
 F:	include/media/media-*.h
 F:	include/uapi/linux/media.h
 
+MEDIA DRIVER FOR FREESCALE IMX PXP
+M:	Philipp Zabel <p.zabel@pengutronix.de>
+L:	linux-media@vger.kernel.org
+S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
+F:	drivers/media/platform/imx-pxp.[ch]
+
 MEDIA DRIVERS FOR ASCOT2E
 M:	Sergey Kozlov <serjk@netup.ru>
 M:	Abylay Ospan <aospan@netup.ru>
 L:	linux-media@vger.kernel.org
+S:	Supported
 W:	https://linuxtv.org
 W:	http://netup.tv/
 T:	git git://linuxtv.org/media_tree.git
-S:	Supported
 F:	drivers/media/dvb-frontends/ascot2e*
 
 MEDIA DRIVERS FOR CXD2099AR CI CONTROLLERS
 M:	Jasmin Jessich <jasmin@anw.at>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
-S:	Maintained
 F:	drivers/media/dvb-frontends/cxd2099*
 
 MEDIA DRIVERS FOR CXD2841ER
 M:	Sergey Kozlov <serjk@netup.ru>
 M:	Abylay Ospan <aospan@netup.ru>
 L:	linux-media@vger.kernel.org
+S:	Supported
 W:	https://linuxtv.org
 W:	http://netup.tv/
 T:	git git://linuxtv.org/media_tree.git
-S:	Supported
 F:	drivers/media/dvb-frontends/cxd2841er*
 
 MEDIA DRIVERS FOR CXD2880
 M:	Yasunari Takiguchi <Yasunari.Takiguchi@sony.com>
 L:	linux-media@vger.kernel.org
+S:	Supported
 W:	http://linuxtv.org/
 T:	git git://linuxtv.org/media_tree.git
-S:	Supported
 F:	drivers/media/dvb-frontends/cxd2880/*
 F:	drivers/media/spi/cxd2880*
 
 MEDIA DRIVERS FOR DIGITAL DEVICES PCIE DEVICES
 L:	linux-media@vger.kernel.org
+S:	Orphan
 W:	https://linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
-S:	Orphan
 F:	drivers/media/pci/ddbridge/*
 
 MEDIA DRIVERS FOR FREESCALE IMX
 M:	Steve Longerbeam <slongerbeam@gmail.com>
 M:	Philipp Zabel <p.zabel@pengutronix.de>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/devicetree/bindings/media/imx.txt
 F:	Documentation/media/v4l-drivers/imx.rst
 F:	drivers/staging/media/imx/
 F:	include/linux/imx-media.h
 F:	include/media/imx.h
 
-MEDIA DRIVER FOR FREESCALE IMX PXP
-M:	Philipp Zabel <p.zabel@pengutronix.de>
-L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
-S:	Maintained
-F:	drivers/media/platform/imx-pxp.[ch]
-
 MEDIA DRIVERS FOR FREESCALE IMX7
 M:	Rui Miguel Silva <rmfrfs@gmail.com>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/devicetree/bindings/media/imx7-csi.txt
 F:	Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt
 F:	Documentation/media/v4l-drivers/imx7.rst
@@ -10443,55 +10472,64 @@
 MEDIA DRIVERS FOR HELENE
 M:	Abylay Ospan <aospan@netup.ru>
 L:	linux-media@vger.kernel.org
+S:	Supported
 W:	https://linuxtv.org
 W:	http://netup.tv/
 T:	git git://linuxtv.org/media_tree.git
-S:	Supported
 F:	drivers/media/dvb-frontends/helene*
 
 MEDIA DRIVERS FOR HORUS3A
 M:	Sergey Kozlov <serjk@netup.ru>
 M:	Abylay Ospan <aospan@netup.ru>
 L:	linux-media@vger.kernel.org
+S:	Supported
 W:	https://linuxtv.org
 W:	http://netup.tv/
 T:	git git://linuxtv.org/media_tree.git
-S:	Supported
 F:	drivers/media/dvb-frontends/horus3a*
 
 MEDIA DRIVERS FOR LNBH25
 M:	Sergey Kozlov <serjk@netup.ru>
 M:	Abylay Ospan <aospan@netup.ru>
 L:	linux-media@vger.kernel.org
+S:	Supported
 W:	https://linuxtv.org
 W:	http://netup.tv/
 T:	git git://linuxtv.org/media_tree.git
-S:	Supported
 F:	drivers/media/dvb-frontends/lnbh25*
 
 MEDIA DRIVERS FOR MXL5XX TUNER DEMODULATORS
 L:	linux-media@vger.kernel.org
+S:	Orphan
 W:	https://linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
-S:	Orphan
 F:	drivers/media/dvb-frontends/mxl5xx*
 
 MEDIA DRIVERS FOR NETUP PCI UNIVERSAL DVB devices
 M:	Sergey Kozlov <serjk@netup.ru>
 M:	Abylay Ospan <aospan@netup.ru>
 L:	linux-media@vger.kernel.org
+S:	Supported
 W:	https://linuxtv.org
 W:	http://netup.tv/
 T:	git git://linuxtv.org/media_tree.git
-S:	Supported
 F:	drivers/media/pci/netup_unidvb/*
 
+MEDIA DRIVERS FOR NVIDIA TEGRA - VDE
+M:	Dmitry Osipenko <digetx@gmail.com>
+L:	linux-media@vger.kernel.org
+L:	linux-tegra@vger.kernel.org
+S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
+F:	Documentation/devicetree/bindings/media/nvidia,tegra-vde.txt
+F:	drivers/staging/media/tegra-vde/
+
 MEDIA DRIVERS FOR RENESAS - CEU
 M:	Jacopo Mondi <jacopo@jmondi.org>
 L:	linux-media@vger.kernel.org
 L:	linux-renesas-soc@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Supported
+T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/devicetree/bindings/media/renesas,ceu.yaml
 F:	drivers/media/platform/renesas-ceu.c
 F:	include/media/drv-intf/renesas-ceu.h
@@ -10500,8 +10538,8 @@
 M:	Ramesh Shanmugasundaram <rashanmu@gmail.com>
 L:	linux-media@vger.kernel.org
 L:	linux-renesas-soc@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Supported
+T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/devicetree/bindings/media/renesas,drif.txt
 F:	drivers/media/platform/rcar_drif.c
 
@@ -10509,8 +10547,8 @@
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 L:	linux-renesas-soc@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Supported
+T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/devicetree/bindings/media/renesas,fcp.txt
 F:	drivers/media/platform/rcar-fcp.c
 F:	include/media/rcar-fcp.h
@@ -10519,8 +10557,8 @@
 M:	Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 L:	linux-renesas-soc@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Supported
+T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/devicetree/bindings/media/renesas,fdp1.txt
 F:	drivers/media/platform/rcar_fdp1.c
 
@@ -10528,10 +10566,10 @@
 M:	Niklas Söderlund <niklas.soderlund@ragnatech.se>
 L:	linux-media@vger.kernel.org
 L:	linux-renesas-soc@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Supported
+T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/devicetree/bindings/media/renesas,csi2.yaml
-F:	Documentation/devicetree/bindings/media/renesas,vin.txt
+F:	Documentation/devicetree/bindings/media/renesas,vin.yaml
 F:	drivers/media/platform/rcar-vin/
 
 MEDIA DRIVERS FOR RENESAS - VSP1
@@ -10539,49 +10577,40 @@
 M:	Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 L:	linux-renesas-soc@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Supported
+T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/devicetree/bindings/media/renesas,vsp1.txt
 F:	drivers/media/platform/vsp1/
 
 MEDIA DRIVERS FOR ST STV0910 DEMODULATOR ICs
 L:	linux-media@vger.kernel.org
+S:	Orphan
 W:	https://linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
-S:	Orphan
 F:	drivers/media/dvb-frontends/stv0910*
 
 MEDIA DRIVERS FOR ST STV6111 TUNER ICs
 L:	linux-media@vger.kernel.org
+S:	Orphan
 W:	https://linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
-S:	Orphan
 F:	drivers/media/dvb-frontends/stv6111*
 
 MEDIA DRIVERS FOR STM32 - DCMI
 M:	Hugues Fruchet <hugues.fruchet@st.com>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Supported
+T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
 F:	drivers/media/platform/stm32/stm32-dcmi.c
 
-MEDIA DRIVERS FOR NVIDIA TEGRA - VDE
-M:	Dmitry Osipenko <digetx@gmail.com>
-L:	linux-media@vger.kernel.org
-L:	linux-tegra@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
-S:	Maintained
-F:	Documentation/devicetree/bindings/media/nvidia,tegra-vde.txt
-F:	drivers/staging/media/tegra-vde/
-
 MEDIA INPUT INFRASTRUCTURE (V4L/DVB)
 M:	Mauro Carvalho Chehab <mchehab@kernel.org>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 Q:	http://patchwork.kernel.org/project/linux-media/list/
 T:	git git://linuxtv.org/media_tree.git
-S:	Maintained
 F:	Documentation/devicetree/bindings/media/
 F:	Documentation/media/
 F:	drivers/media/
@@ -10589,12 +10618,12 @@
 F:	include/linux/platform_data/media/
 F:	include/media/
 F:	include/uapi/linux/dvb/
-F:	include/uapi/linux/videodev2.h
-F:	include/uapi/linux/media.h
-F:	include/uapi/linux/v4l2-*
-F:	include/uapi/linux/meye.h
 F:	include/uapi/linux/ivtv*
+F:	include/uapi/linux/media.h
+F:	include/uapi/linux/meye.h
 F:	include/uapi/linux/uvcvideo.h
+F:	include/uapi/linux/v4l2-*
+F:	include/uapi/linux/videodev2.h
 
 MEDIATEK BLUETOOTH DRIVER
 M:	Sean Wang <sean.wang@mediatek.com>
@@ -10604,6 +10633,13 @@
 F:	Documentation/devicetree/bindings/net/mediatek-bluetooth.txt
 F:	drivers/bluetooth/btmtkuart.c
 
+MEDIATEK BOARD LEVEL SHUTDOWN DRIVERS
+M:	Sean Wang <sean.wang@mediatek.com>
+L:	linux-pm@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt
+F:	drivers/power/reset/mt6323-poweroff.c
+
 MEDIATEK CIR DRIVER
 M:	Sean Wang <sean.wang@mediatek.com>
 S:	Maintained
@@ -10618,12 +10654,6 @@
 F:	Documentation/devicetree/bindings/dma/mtk-*
 F:	drivers/dma/mediatek/
 
-MEDIATEK PMIC LED DRIVER
-M:	Sean Wang <sean.wang@mediatek.com>
-S:	Maintained
-F:	drivers/leds/leds-mt6323.c
-F:	Documentation/devicetree/bindings/leds/leds-mt6323.txt
-
 MEDIATEK ETHERNET DRIVER
 M:	Felix Fietkau <nbd@openwrt.org>
 M:	John Crispin <john@phrozen.org>
@@ -10633,50 +10663,36 @@
 S:	Maintained
 F:	drivers/net/ethernet/mediatek/
 
-MEDIATEK SWITCH DRIVER
-M:	Sean Wang <sean.wang@mediatek.com>
-L:	netdev@vger.kernel.org
-S:	Maintained
-F:	drivers/net/dsa/mt7530.*
-F:	net/dsa/tag_mtk.c
-
-MEDIATEK BOARD LEVEL SHUTDOWN DRIVERS
-M:	Sean Wang <sean.wang@mediatek.com>
-L:	linux-pm@vger.kernel.org
-S:	Maintained
-F:	Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt
-F:	drivers/power/reset/mt6323-poweroff.c
-
 MEDIATEK JPEG DRIVER
 M:	Rick Chang <rick.chang@mediatek.com>
 M:	Bin Liu <bin.liu@mediatek.com>
 S:	Supported
-F:	drivers/media/platform/mtk-jpeg/
 F:	Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt
+F:	drivers/media/platform/mtk-jpeg/
 
 MEDIATEK MDP DRIVER
 M:	Minghsiu Tsai <minghsiu.tsai@mediatek.com>
 M:	Houlong Wei <houlong.wei@mediatek.com>
 M:	Andrew-CT Chen <andrew-ct.chen@mediatek.com>
 S:	Supported
+F:	Documentation/devicetree/bindings/media/mediatek-mdp.txt
 F:	drivers/media/platform/mtk-mdp/
 F:	drivers/media/platform/mtk-vpu/
-F:	Documentation/devicetree/bindings/media/mediatek-mdp.txt
 
 MEDIATEK MEDIA DRIVER
 M:	Tiffany Lin <tiffany.lin@mediatek.com>
 M:	Andrew-CT Chen <andrew-ct.chen@mediatek.com>
 S:	Supported
-F:	drivers/media/platform/mtk-vcodec/
-F:	drivers/media/platform/mtk-vpu/
 F:	Documentation/devicetree/bindings/media/mediatek-vcodec.txt
 F:	Documentation/devicetree/bindings/media/mediatek-vpu.txt
+F:	drivers/media/platform/mtk-vcodec/
+F:	drivers/media/platform/mtk-vpu/
 
 MEDIATEK MMC/SD/SDIO DRIVER
 M:	Chaotian Jing <chaotian.jing@mediatek.com>
 S:	Maintained
-F:	drivers/mmc/host/mtk-sd.c
 F:	Documentation/devicetree/bindings/mmc/mtk-sd.txt
+F:	drivers/mmc/host/mtk-sd.c
 
 MEDIATEK MT76 WIRELESS LAN DRIVER
 M:	Felix Fietkau <nbd@nbd.name>
@@ -10697,21 +10713,34 @@
 M:	Stefan Roese <sr@denx.de>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
-F:	drivers/i2c/busses/i2c-mt7621.c
 F:	Documentation/devicetree/bindings/i2c/i2c-mt7621.txt
+F:	drivers/i2c/busses/i2c-mt7621.c
 
 MEDIATEK NAND CONTROLLER DRIVER
 M:	Xiaolei Li <xiaolei.li@mediatek.com>
 L:	linux-mtd@lists.infradead.org
 S:	Maintained
-F:	drivers/mtd/nand/raw/mtk_*
 F:	Documentation/devicetree/bindings/mtd/mtk-nand.txt
+F:	drivers/mtd/nand/raw/mtk_*
+
+MEDIATEK PMIC LED DRIVER
+M:	Sean Wang <sean.wang@mediatek.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/leds/leds-mt6323.txt
+F:	drivers/leds/leds-mt6323.c
 
 MEDIATEK RANDOM NUMBER GENERATOR SUPPORT
 M:	Sean Wang <sean.wang@mediatek.com>
 S:	Maintained
 F:	drivers/char/hw_random/mtk-rng.c
 
+MEDIATEK SWITCH DRIVER
+M:	Sean Wang <sean.wang@mediatek.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	drivers/net/dsa/mt7530.*
+F:	net/dsa/tag_mtk.c
+
 MEDIATEK USB3 DRD IP DRIVER
 M:	Chunfeng Yun <chunfeng.yun@mediatek.com>
 L:	linux-usb@vger.kernel.org (moderated for non-subscribers)
@@ -10725,8 +10754,8 @@
 M:	Martin Donnelly <martin.donnelly@ge.com>
 M:	Martyn Welch <martyn.welch@collabora.co.uk>
 S:	Maintained
-F:	drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c
 F:	Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
+F:	drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c
 
 MEGARAID SCSI/SAS DRIVERS
 M:	Kashyap Desai <kashyap.desai@broadcom.com>
@@ -10734,32 +10763,32 @@
 M:	Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
 L:	megaraidlinux.pdl@broadcom.com
 L:	linux-scsi@vger.kernel.org
-W:	http://www.avagotech.com/support/
 S:	Maintained
-F:	Documentation/scsi/megaraid.txt
+W:	http://www.avagotech.com/support/
+F:	Documentation/scsi/megaraid.rst
 F:	drivers/scsi/megaraid.*
 F:	drivers/scsi/megaraid/
 
 MELEXIS MLX90614 DRIVER
 M:	Crt Mori <cmo@melexis.com>
 L:	linux-iio@vger.kernel.org
-W:	http://www.melexis.com
 S:	Supported
+W:	http://www.melexis.com
 F:	drivers/iio/temperature/mlx90614.c
 
 MELEXIS MLX90632 DRIVER
 M:	Crt Mori <cmo@melexis.com>
 L:	linux-iio@vger.kernel.org
-W:	http://www.melexis.com
 S:	Supported
+W:	http://www.melexis.com
 F:	drivers/iio/temperature/mlx90632.c
 
 MELFAS MIP4 TOUCHSCREEN DRIVER
 M:	Sangwon Jee <jeesw@melfas.com>
-W:	http://www.melfas.com
 S:	Supported
-F:	drivers/input/touchscreen/melfas_mip4.c
+W:	http://www.melfas.com
 F:	Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt
+F:	drivers/input/touchscreen/melfas_mip4.c
 
 MELLANOX ETHERNET DRIVER (mlx4_en)
 M:	Tariq Toukan <tariqt@mellanox.com>
@@ -10783,8 +10812,8 @@
 S:	Supported
 W:	http://www.mellanox.com
 Q:	http://patchwork.ozlabs.org/project/netdev/list/
-F:	drivers/net/ethernet/mellanox/mlx5/core/en_accel/*
 F:	drivers/net/ethernet/mellanox/mlx5/core/accel/*
+F:	drivers/net/ethernet/mellanox/mlx5/core/en_accel/*
 F:	drivers/net/ethernet/mellanox/mlx5/core/fpga/*
 F:	include/linux/mlx5/mlx5_ifc_fpga.h
 
@@ -10820,18 +10849,18 @@
 M:	Tariq Toukan <tariqt@mellanox.com>
 L:	netdev@vger.kernel.org
 L:	linux-rdma@vger.kernel.org
+S:	Supported
 W:	http://www.mellanox.com
 Q:	http://patchwork.ozlabs.org/project/netdev/list/
-S:	Supported
 F:	drivers/net/ethernet/mellanox/mlx4/
 F:	include/linux/mlx4/
 
 MELLANOX MLX4 IB driver
 M:	Yishai Hadas <yishaih@mellanox.com>
 L:	linux-rdma@vger.kernel.org
+S:	Supported
 W:	http://www.mellanox.com
 Q:	http://patchwork.kernel.org/project/linux-rdma/list/
-S:	Supported
 F:	drivers/infiniband/hw/mlx4/
 F:	include/linux/mlx4/
 F:	include/uapi/rdma/mlx4-abi.h
@@ -10841,19 +10870,19 @@
 M:	Leon Romanovsky <leonro@mellanox.com>
 L:	netdev@vger.kernel.org
 L:	linux-rdma@vger.kernel.org
+S:	Supported
 W:	http://www.mellanox.com
 Q:	http://patchwork.ozlabs.org/project/netdev/list/
-S:	Supported
+F:	Documentation/networking/device_drivers/mellanox/
 F:	drivers/net/ethernet/mellanox/mlx5/core/
 F:	include/linux/mlx5/
-F:	Documentation/networking/device_drivers/mellanox/
 
 MELLANOX MLX5 IB driver
 M:	Leon Romanovsky <leonro@mellanox.com>
 L:	linux-rdma@vger.kernel.org
+S:	Supported
 W:	http://www.mellanox.com
 Q:	http://patchwork.kernel.org/project/linux-rdma/list/
-S:	Supported
 F:	drivers/infiniband/hw/mlx5/
 F:	include/linux/mlx5/
 F:	include/uapi/rdma/mlx5-abi.h
@@ -10863,17 +10892,17 @@
 M:	Michael Shych <michaelsh@mellanox.com>
 L:	linux-i2c@vger.kernel.org
 S:	Supported
+F:	Documentation/i2c/busses/i2c-mlxcpld.rst
 F:	drivers/i2c/busses/i2c-mlxcpld.c
 F:	drivers/i2c/muxes/i2c-mux-mlxcpld.c
-F:	Documentation/i2c/busses/i2c-mlxcpld.rst
 
 MELLANOX MLXCPLD LED DRIVER
 M:	Vadim Pasternak <vadimp@mellanox.com>
 L:	linux-leds@vger.kernel.org
 S:	Supported
+F:	Documentation/leds/leds-mlxcpld.rst
 F:	drivers/leds/leds-mlxcpld.c
 F:	drivers/leds/leds-mlxreg.c
-F:	Documentation/leds/leds-mlxcpld.rst
 
 MELLANOX PLATFORM DRIVER
 M:	Vadim Pasternak <vadimp@mellanox.com>
@@ -10886,30 +10915,30 @@
 M:	"Paul E. McKenney" <paulmck@kernel.org>
 L:	linux-kernel@vger.kernel.org
 S:	Supported
-F:	kernel/sched/membarrier.c
-F:	include/uapi/linux/membarrier.h
 F:	arch/powerpc/include/asm/membarrier.h
+F:	include/uapi/linux/membarrier.h
+F:	kernel/sched/membarrier.c
 
 MEMBLOCK
 M:	Mike Rapoport <rppt@linux.ibm.com>
 L:	linux-mm@kvack.org
 S:	Maintained
+F:	Documentation/core-api/boot-time-mm.rst
 F:	include/linux/memblock.h
 F:	mm/memblock.c
-F:	Documentation/core-api/boot-time-mm.rst
 
 MEMORY MANAGEMENT
 M:	Andrew Morton <akpm@linux-foundation.org>
 L:	linux-mm@kvack.org
+S:	Maintained
 W:	http://www.linux-mm.org
 T:	quilt https://ozlabs.org/~akpm/mmotm/
 T:	quilt https://ozlabs.org/~akpm/mmots/
 T:	git git://github.com/hnaz/linux-mm.git
-S:	Maintained
-F:	include/linux/mm.h
 F:	include/linux/gfp.h
-F:	include/linux/mmzone.h
 F:	include/linux/memory_hotplug.h
+F:	include/linux/mm.h
+F:	include/linux/mmzone.h
 F:	include/linux/vmalloc.h
 F:	mm/
 
@@ -10918,12 +10947,12 @@
 M:	Richard Weinberger <richard@nod.at>
 M:	Vignesh Raghavendra <vigneshr@ti.com>
 L:	linux-mtd@lists.infradead.org
+S:	Maintained
 W:	http://www.linux-mtd.infradead.org/
 Q:	http://patchwork.ozlabs.org/project/linux-mtd/list/
 C:	irc://irc.oftc.net/mtd
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git mtd/fixes
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git mtd/next
-S:	Maintained
 F:	Documentation/devicetree/bindings/mtd/
 F:	drivers/mtd/
 F:	include/linux/mtd/
@@ -10938,18 +10967,18 @@
 MEN CHAMELEON BUS (mcb)
 M:	Johannes Thumshirn <morbidrsa@gmail.com>
 S:	Maintained
+F:	Documentation/driver-api/men-chameleon-bus.rst
 F:	drivers/mcb/
 F:	include/linux/mcb.h
-F:	Documentation/driver-api/men-chameleon-bus.rst
 
 MEN F21BMC (Board Management Controller)
 M:	Andreas Werner <andreas.werner@men.de>
 S:	Supported
+F:	Documentation/hwmon/menf21bmc.rst
+F:	drivers/hwmon/menf21bmc_hwmon.c
+F:	drivers/leds/leds-menf21bmc.c
 F:	drivers/mfd/menf21bmc.c
 F:	drivers/watchdog/menf21bmc_wdt.c
-F:	drivers/leds/leds-menf21bmc.c
-F:	drivers/hwmon/menf21bmc_hwmon.c
-F:	Documentation/hwmon/menf21bmc.rst
 
 MEN Z069 WATCHDOG DRIVER
 M:	Johannes Thumshirn <jth@kernel.org>
@@ -10961,46 +10990,71 @@
 M:	Neil Armstrong <narmstrong@baylibre.com>
 L:	linux-media@vger.kernel.org
 L:	linux-amlogic@lists.infradead.org
-W:	http://linux-meson.com/
 S:	Supported
-F:	drivers/media/platform/meson/ao-cec.c
-F:	drivers/media/platform/meson/ao-cec-g12a.c
-F:	Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
+W:	http://linux-meson.com/
 T:	git git://linuxtv.org/media_tree.git
+F:	Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
+F:	drivers/media/platform/meson/ao-cec-g12a.c
+F:	drivers/media/platform/meson/ao-cec.c
 
 MESON NAND CONTROLLER DRIVER FOR AMLOGIC SOCS
 M:	Liang Yang <liang.yang@amlogic.com>
 L:	linux-mtd@lists.infradead.org
 S:	Maintained
-F:	drivers/mtd/nand/raw/meson_*
 F:	Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
+F:	drivers/mtd/nand/raw/meson_*
 
 MESON VIDEO DECODER DRIVER FOR AMLOGIC SOCS
 M:	Maxime Jourdan <mjourdan@baylibre.com>
 L:	linux-media@vger.kernel.org
 L:	linux-amlogic@lists.infradead.org
 S:	Supported
-F:	drivers/staging/media/meson/vdec/
 T:	git git://linuxtv.org/media_tree.git
+F:	drivers/staging/media/meson/vdec/
 
 METHODE UDPU SUPPORT
 M:	Vladimir Vid <vladimir.vid@sartura.hr>
 S:	Maintained
 F:	arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
 
+MHI BUS
+M:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+M:	Hemant Kumar <hemantk@codeaurora.org>
+L:	linux-arm-msm@vger.kernel.org
+S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi.git
+F:	Documentation/mhi/
+F:	drivers/bus/mhi/
+F:	include/linux/mhi.h
+
 MICROBLAZE ARCHITECTURE
 M:	Michal Simek <monstr@monstr.eu>
+S:	Supported
 W:	http://www.monstr.eu/fdt/
 T:	git git://git.monstr.eu/linux-2.6-microblaze.git
-S:	Supported
 F:	arch/microblaze/
 
 MICROCHIP AT91 SERIAL DRIVER
 M:	Richard Genoud <richard.genoud@gmail.com>
 S:	Maintained
+F:	Documentation/devicetree/bindings/mfd/atmel-usart.txt
 F:	drivers/tty/serial/atmel_serial.c
 F:	drivers/tty/serial/atmel_serial.h
+
+MICROCHIP AT91 USART MFD DRIVER
+M:	Radu Pirea <radu_nicolae.pirea@upb.ro>
+L:	linux-kernel@vger.kernel.org
+S:	Supported
 F:	Documentation/devicetree/bindings/mfd/atmel-usart.txt
+F:	drivers/mfd/at91-usart.c
+F:	include/dt-bindings/mfd/at91-usart.h
+
+MICROCHIP AT91 USART SPI DRIVER
+M:	Radu Pirea <radu_nicolae.pirea@upb.ro>
+L:	linux-spi@vger.kernel.org
+S:	Supported
+F:	Documentation/devicetree/bindings/mfd/atmel-usart.txt
+F:	drivers/spi/spi-at91-usart.c
 
 MICROCHIP AUDIO ASOC DRIVERS
 M:	Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
@@ -11013,11 +11067,11 @@
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	dmaengine@vger.kernel.org
 S:	Supported
+F:	Documentation/devicetree/bindings/dma/atmel-dma.txt
 F:	drivers/dma/at_hdmac.c
 F:	drivers/dma/at_hdmac_regs.h
-F:	include/linux/platform_data/dma-atmel.h
-F:	Documentation/devicetree/bindings/dma/atmel-dma.txt
 F:	include/dt-bindings/dma/at91.h
+F:	include/linux/platform_data/dma-atmel.h
 
 MICROCHIP ECC DRIVER
 M:	Tudor Ambarus <tudor.ambarus@microchip.com>
@@ -11029,18 +11083,18 @@
 M:	Ludovic Desroches <ludovic.desroches@microchip.com>
 L:	linux-i2c@vger.kernel.org
 S:	Supported
-F:	drivers/i2c/busses/i2c-at91.h
 F:	drivers/i2c/busses/i2c-at91-*.c
+F:	drivers/i2c/busses/i2c-at91.h
 
 MICROCHIP ISC DRIVER
 M:	Eugen Hristev <eugen.hristev@microchip.com>
 L:	linux-media@vger.kernel.org
 S:	Supported
-F:	drivers/media/platform/atmel/atmel-sama5d2-isc.c
-F:	drivers/media/platform/atmel/atmel-isc.h
+F:	Documentation/devicetree/bindings/media/atmel-isc.txt
 F:	drivers/media/platform/atmel/atmel-isc-base.c
 F:	drivers/media/platform/atmel/atmel-isc-regs.h
-F:	Documentation/devicetree/bindings/media/atmel-isc.txt
+F:	drivers/media/platform/atmel/atmel-isc.h
+F:	drivers/media/platform/atmel/atmel-sama5d2-isc.c
 F:	include/linux/atmel-isc-media.h
 
 MICROCHIP ISI DRIVER
@@ -11050,30 +11104,15 @@
 F:	drivers/media/platform/atmel/atmel-isi.c
 F:	drivers/media/platform/atmel/atmel-isi.h
 
-MICROCHIP AT91 USART MFD DRIVER
-M:	Radu Pirea <radu_nicolae.pirea@upb.ro>
-L:	linux-kernel@vger.kernel.org
-S:	Supported
-F:	drivers/mfd/at91-usart.c
-F:	include/dt-bindings/mfd/at91-usart.h
-F:	Documentation/devicetree/bindings/mfd/atmel-usart.txt
-
-MICROCHIP AT91 USART SPI DRIVER
-M:	Radu Pirea <radu_nicolae.pirea@upb.ro>
-L:	linux-spi@vger.kernel.org
-S:	Supported
-F:	drivers/spi/spi-at91-usart.c
-F:	Documentation/devicetree/bindings/mfd/atmel-usart.txt
-
 MICROCHIP KSZ SERIES ETHERNET SWITCH DRIVER
 M:	Woojung Huh <woojung.huh@microchip.com>
 M:	Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	net/dsa/tag_ksz.c
+F:	Documentation/devicetree/bindings/net/dsa/ksz.txt
 F:	drivers/net/dsa/microchip/*
 F:	include/linux/platform_data/microchip-ksz.h
-F:	Documentation/devicetree/bindings/net/dsa/ksz.txt
+F:	net/dsa/tag_ksz.c
 
 MICROCHIP LAN743X ETHERNET DRIVER
 M:	Bryan Whitehead <bryan.whitehead@microchip.com>
@@ -11089,11 +11128,6 @@
 F:	drivers/video/fbdev/atmel_lcdfb.c
 F:	include/video/atmel_lcdc.h
 
-MICROCHIP MMC/SD/SDIO MCI DRIVER
-M:	Ludovic Desroches <ludovic.desroches@microchip.com>
-S:	Maintained
-F:	drivers/mmc/host/atmel-mci.c
-
 MICROCHIP MCP16502 PMIC DRIVER
 M:	Andrei Stefanescu <andrei.stefanescu@microchip.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -11106,31 +11140,36 @@
 M:	Kent Gustavsson <kent@minoris.se>
 L:	linux-iio@vger.kernel.org
 S:	Supported
-F:	drivers/iio/adc/mcp3911.c
 F:	Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
+F:	drivers/iio/adc/mcp3911.c
+
+MICROCHIP MMC/SD/SDIO MCI DRIVER
+M:	Ludovic Desroches <ludovic.desroches@microchip.com>
+S:	Maintained
+F:	drivers/mmc/host/atmel-mci.c
 
 MICROCHIP NAND DRIVER
 M:	Tudor Ambarus <tudor.ambarus@microchip.com>
 L:	linux-mtd@lists.infradead.org
 S:	Supported
-F:	drivers/mtd/nand/raw/atmel/*
 F:	Documentation/devicetree/bindings/mtd/atmel-nand.txt
+F:	drivers/mtd/nand/raw/atmel/*
 
 MICROCHIP PWM DRIVER
 M:	Claudiu Beznea <claudiu.beznea@microchip.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-pwm@vger.kernel.org
 S:	Supported
-F:	drivers/pwm/pwm-atmel.c
 F:	Documentation/devicetree/bindings/pwm/atmel-pwm.txt
+F:	drivers/pwm/pwm-atmel.c
 
 MICROCHIP SAMA5D2-COMPATIBLE ADC DRIVER
 M:	Ludovic Desroches <ludovic.desroches@microchip.com>
 M:	Eugen Hristev <eugen.hristev@microchip.com>
 L:	linux-iio@vger.kernel.org
 S:	Supported
-F:	drivers/iio/adc/at91-sama5d2_adc.c
 F:	Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt
+F:	drivers/iio/adc/at91-sama5d2_adc.c
 F:	include/dt-bindings/iio/adc/at91-sama5d2_adc.h
 
 MICROCHIP SAMA5D2-COMPATIBLE SHUTDOWN CONTROLLER
@@ -11150,19 +11189,19 @@
 F:	drivers/misc/atmel-ssc.c
 F:	include/linux/atmel-ssc.h
 
+MICROCHIP USB251XB DRIVER
+M:	Richard Leitner <richard.leitner@skidata.com>
+L:	linux-usb@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/usb/usb251xb.txt
+F:	drivers/usb/misc/usb251xb.c
+
 MICROCHIP USBA UDC DRIVER
 M:	Cristian Birsan <cristian.birsan@microchip.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Supported
 F:	drivers/usb/gadget/udc/atmel_usba_udc.*
 
-MICROCHIP USB251XB DRIVER
-M:	Richard Leitner <richard.leitner@skidata.com>
-L:	linux-usb@vger.kernel.org
-S:	Maintained
-F:	drivers/usb/misc/usb251xb.c
-F:	Documentation/devicetree/bindings/usb/usb251xb.txt
-
 MICROCHIP XDMA DRIVER
 M:	Ludovic Desroches <ludovic.desroches@microchip.com>
 L:	linux-arm-kernel@lists.infradead.org
@@ -11170,28 +11209,6 @@
 S:	Supported
 F:	drivers/dma/at_xdmac.c
 
-MICROSEMI MIPS SOCS
-M:	Alexandre Belloni <alexandre.belloni@bootlin.com>
-M:	Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>
-L:	linux-mips@vger.kernel.org
-S:	Supported
-F:	arch/mips/generic/board-ocelot.c
-F:	arch/mips/configs/generic/board-ocelot.config
-F:	arch/mips/boot/dts/mscc/
-F:	Documentation/devicetree/bindings/mips/mscc.txt
-
-MICROSEMI SMART ARRAY SMARTPQI DRIVER (smartpqi)
-M:	Don Brace <don.brace@microsemi.com>
-L:	esc.storagedev@microsemi.com
-L:	linux-scsi@vger.kernel.org
-S:	Supported
-F:	drivers/scsi/smartpqi/smartpqi*.[ch]
-F:	drivers/scsi/smartpqi/Kconfig
-F:	drivers/scsi/smartpqi/Makefile
-F:	include/linux/cciss*.h
-F:	include/uapi/linux/cciss*.h
-F:	Documentation/scsi/smartpqi.txt
-
 MICROSEMI ETHERNET SWITCH DRIVER
 M:	Alexandre Belloni <alexandre.belloni@bootlin.com>
 M:	Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>
@@ -11200,6 +11217,28 @@
 F:	drivers/net/ethernet/mscc/
 F:	include/soc/mscc/ocelot*
 
+MICROSEMI MIPS SOCS
+M:	Alexandre Belloni <alexandre.belloni@bootlin.com>
+M:	Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>
+L:	linux-mips@vger.kernel.org
+S:	Supported
+F:	Documentation/devicetree/bindings/mips/mscc.txt
+F:	arch/mips/boot/dts/mscc/
+F:	arch/mips/configs/generic/board-ocelot.config
+F:	arch/mips/generic/board-ocelot.c
+
+MICROSEMI SMART ARRAY SMARTPQI DRIVER (smartpqi)
+M:	Don Brace <don.brace@microsemi.com>
+L:	esc.storagedev@microsemi.com
+L:	linux-scsi@vger.kernel.org
+S:	Supported
+F:	Documentation/scsi/smartpqi.rst
+F:	drivers/scsi/smartpqi/Kconfig
+F:	drivers/scsi/smartpqi/Makefile
+F:	drivers/scsi/smartpqi/smartpqi*.[ch]
+F:	include/linux/cciss*.h
+F:	include/uapi/linux/cciss*.h
+
 MICROSOFT SURFACE PRO 3 BUTTON DRIVER
 M:	Chen Yu <yu.c.chen@intel.com>
 L:	platform-driver-x86@vger.kernel.org
@@ -11214,10 +11253,10 @@
 MIPS
 M:	Thomas Bogendoerfer <tsbogend@alpha.franken.de>
 L:	linux-mips@vger.kernel.org
-W:	http://www.linux-mips.org/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux.git
-Q:	https://patchwork.kernel.org/project/linux-mips/list/
 S:	Maintained
+W:	http://www.linux-mips.org/
+Q:	https://patchwork.kernel.org/project/linux-mips/list/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux.git
 F:	Documentation/devicetree/bindings/mips/
 F:	Documentation/mips/
 F:	arch/mips/
@@ -11241,56 +11280,56 @@
 F:	arch/mips/generic/
 F:	arch/mips/tools/generic-board-config.sh
 
+MIPS RINT INSTRUCTION EMULATION
+M:	Aleksandar Markovic <aleksandar.markovic@mips.com>
+L:	linux-mips@vger.kernel.org
+S:	Supported
+F:	arch/mips/math-emu/dp_rint.c
+F:	arch/mips/math-emu/sp_rint.c
+
 MIPS/LOONGSON1 ARCHITECTURE
 M:	Keguang Zhang <keguang.zhang@gmail.com>
 L:	linux-mips@vger.kernel.org
 S:	Maintained
-F:	arch/mips/loongson32/
 F:	arch/mips/include/asm/mach-loongson32/
-F:	drivers/*/*loongson1*
+F:	arch/mips/loongson32/
 F:	drivers/*/*/*loongson1*
+F:	drivers/*/*loongson1*
 
 MIPS/LOONGSON2EF ARCHITECTURE
 M:	Jiaxun Yang <jiaxun.yang@flygoat.com>
 L:	linux-mips@vger.kernel.org
 S:	Maintained
-F:	arch/mips/loongson2ef/
 F:	arch/mips/include/asm/mach-loongson2ef/
-F:	drivers/*/*loongson2*
+F:	arch/mips/loongson2ef/
 F:	drivers/*/*/*loongson2*
+F:	drivers/*/*loongson2*
 
 MIPS/LOONGSON64 ARCHITECTURE
 M:	Huacai Chen <chenhc@lemote.com>
 M:	Jiaxun Yang <jiaxun.yang@flygoat.com>
 L:	linux-mips@vger.kernel.org
 S:	Maintained
-F:	arch/mips/loongson64/
 F:	arch/mips/include/asm/mach-loongson64/
-F:	drivers/platform/mips/cpu_hwmon.c
-F:	drivers/irqchip/irq-loongson*
-F:	drivers/*/*loongson3*
+F:	arch/mips/loongson64/
 F:	drivers/*/*/*loongson3*
-
-MIPS RINT INSTRUCTION EMULATION
-M:	Aleksandar Markovic <aleksandar.markovic@mips.com>
-L:	linux-mips@vger.kernel.org
-S:	Supported
-F:	arch/mips/math-emu/sp_rint.c
-F:	arch/mips/math-emu/dp_rint.c
+F:	drivers/*/*loongson3*
+F:	drivers/irqchip/irq-loongson*
+F:	drivers/platform/mips/cpu_hwmon.c
 
 MIROSOUND PCM20 FM RADIO RECEIVER DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
-W:	https://linuxtv.org
 S:	Odd Fixes
+W:	https://linuxtv.org
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/radio/radio-miropcm20*
 
 MMP SUPPORT
 R:	Lubomir Rintel <lkundrak@v3.sk>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lkundrak/linux-mmp.git
 S:	Odd Fixes
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lkundrak/linux-mmp.git
 F:	arch/arm/boot/dts/mmp*
 F:	arch/arm/mach-mmp/
 F:	linux/soc/mmp/
@@ -11318,31 +11357,39 @@
 MN88472 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
-S:	Maintained
 F:	drivers/media/dvb-frontends/mn88472*
 
 MN88473 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
-S:	Maintained
 F:	drivers/media/dvb-frontends/mn88473*
 
 MODULE SUPPORT
 M:	Jessica Yu <jeyu@kernel.org>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux.git modules-next
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux.git modules-next
 F:	include/linux/module.h
 F:	kernel/module.c
 
+MONOLITHIC POWER SYSTEM PMIC DRIVER
+M:	Saravanan Sekar <sravanhome@gmail.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/regulator/mps,mp*.yaml
+F:	drivers/regulator/mp5416.c
+F:	drivers/regulator/mpq7920.c
+F:	drivers/regulator/mpq7920.h
+
 MOTION EYE VAIO PICTUREBOOK CAMERA DRIVER
-W:	http://popies.net/meye/
 S:	Orphan
+W:	http://popies.net/meye/
 F:	Documentation/media/v4l-drivers/meye*
 F:	drivers/media/pci/meye/
 F:	include/uapi/linux/meye.h
@@ -11353,27 +11400,19 @@
 F:	Documentation/driver-api/serial/moxa-smartio.rst
 F:	drivers/tty/mxser.*
 
-MONOLITHIC POWER SYSTEM PMIC DRIVER
-M:	Saravanan Sekar <sravanhome@gmail.com>
-S:	Maintained
-F:	Documentation/devicetree/bindings/regulator/mps,mp*.yaml
-F:	drivers/regulator/mp5416.c
-F:	drivers/regulator/mpq7920.c
-F:	drivers/regulator/mpq7920.h
-
 MR800 AVERMEDIA USB FM RADIO DRIVER
 M:	Alexey Klimov <klimov.linux@gmail.com>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/radio/radio-mr800.c
 
 MRF24J40 IEEE 802.15.4 RADIO DRIVER
 M:	Alan Ott <alan@signal11.us>
 L:	linux-wpan@vger.kernel.org
 S:	Maintained
-F:	drivers/net/ieee802154/mrf24j40.c
 F:	Documentation/devicetree/bindings/net/ieee802154/mrf24j40.txt
+F:	drivers/net/ieee802154/mrf24j40.c
 
 MSI LAPTOP SUPPORT
 M:	"Lee, Chun-Yi" <jlee@suse.com>
@@ -11389,21 +11428,21 @@
 MSI001 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
-S:	Maintained
 F:	drivers/media/tuners/msi001*
 
 MSI2500 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
-S:	Maintained
 F:	drivers/media/usb/msi2500/
 
 MSYSTEMS DISKONCHIP G3 MTD DRIVER
@@ -11415,40 +11454,40 @@
 MT9M032 APTINA SENSOR DRIVER
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/i2c/mt9m032.c
 F:	include/media/i2c/mt9m032.h
 
 MT9P031 APTINA CAMERA SENSOR
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/i2c/mt9p031.c
 F:	include/media/i2c/mt9p031.h
 
 MT9T001 APTINA CAMERA SENSOR
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/i2c/mt9t001.c
 F:	include/media/i2c/mt9t001.h
 
 MT9T112 APTINA CAMERA SENSOR
 M:	Jacopo Mondi <jacopo@jmondi.org>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Odd Fixes
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/i2c/mt9t112.c
 F:	include/media/i2c/mt9t112.h
 
 MT9V032 APTINA CAMERA SENSOR
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/devicetree/bindings/media/i2c/mt9v032.txt
 F:	drivers/media/i2c/mt9v032.c
 F:	include/media/i2c/mt9v032.h
@@ -11456,19 +11495,19 @@
 MT9V111 APTINA CAMERA SENSOR
 M:	Jacopo Mondi <jacopo@jmondi.org>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.txt
 F:	drivers/media/i2c/mt9v111.c
 
 MULTIFUNCTION DEVICES (MFD)
 M:	Lee Jones <lee.jones@linaro.org>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git
 S:	Supported
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git
 F:	Documentation/devicetree/bindings/mfd/
 F:	drivers/mfd/
-F:	include/linux/mfd/
 F:	include/dt-bindings/mfd/
+F:	include/linux/mfd/
 
 MULTIMEDIA CARD (MMC) ETC. OVER SPI
 S:	Orphan
@@ -11478,8 +11517,8 @@
 MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND SDIO SUBSYSTEM
 M:	Ulf Hansson <ulf.hansson@linaro.org>
 L:	linux-mmc@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc.git
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc.git
 F:	Documentation/devicetree/bindings/mmc/
 F:	drivers/mmc/
 F:	include/linux/mmc/
@@ -11490,9 +11529,9 @@
 S:	Maintained
 F:	Documentation/ABI/testing/sysfs-class-mux*
 F:	Documentation/devicetree/bindings/mux/
+F:	drivers/mux/
 F:	include/dt-bindings/mux/
 F:	include/linux/mux/
-F:	drivers/mux/
 
 MULTITECH MULTIPORT CARD (ISICOM)
 S:	Orphan
@@ -11514,11 +11553,11 @@
 MXL5007T MEDIA DRIVER
 M:	Michael Krufky <mkrufky@linuxtv.org>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 W:	http://github.com/mkrufky
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/mkrufky/tuners.git
-S:	Maintained
 F:	drivers/media/tuners/mxl5007t.*
 
 MXSFB DRM DRIVER
@@ -11526,9 +11565,9 @@
 M:	Stefan Agner <stefan@agner.ch>
 L:	dri-devel@lists.freedesktop.org
 S:	Supported
-F:	drivers/gpu/drm/mxsfb/
-F:	Documentation/devicetree/bindings/display/mxsfb.txt
 T:	git git://anongit.freedesktop.org/drm/drm-misc
+F:	Documentation/devicetree/bindings/display/mxsfb.txt
+F:	drivers/gpu/drm/mxsfb/
 
 MYLEX DAC960 PCI RAID Controller
 M:	Hannes Reinecke <hare@kernel.org>
@@ -11540,25 +11579,26 @@
 MYRICOM MYRI-10G 10GbE DRIVER (MYRI10GE)
 M:	Chris Lee <christopher.lee@cspi.com>
 L:	netdev@vger.kernel.org
-W:	https://www.cspi.com/ethernet-products/support/downloads/
 S:	Supported
+W:	https://www.cspi.com/ethernet-products/support/downloads/
 F:	drivers/net/ethernet/myricom/myri10ge/
 
 NAND FLASH SUBSYSTEM
 M:	Miquel Raynal <miquel.raynal@bootlin.com>
 R:	Richard Weinberger <richard@nod.at>
 L:	linux-mtd@lists.infradead.org
+S:	Maintained
 W:	http://www.linux-mtd.infradead.org/
 Q:	http://patchwork.ozlabs.org/project/linux-mtd/list/
+C:	irc://irc.oftc.net/mtd
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next
-S:	Maintained
 F:	drivers/mtd/nand/
 F:	include/linux/mtd/*nand*.h
 
 NATIVE INSTRUMENTS USB SOUND INTERFACE DRIVER
 M:	Daniel Mack <zonque@gmail.com>
-S:	Maintained
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
+S:	Maintained
 W:	http://www.native-instruments.com
 F:	sound/usb/caiaq/
 
@@ -11571,7 +11611,7 @@
 M:	Michael Schmitz <schmitzmic@gmail.com>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
-F:	Documentation/scsi/g_NCR5380.txt
+F:	Documentation/scsi/g_NCR5380.rst
 F:	drivers/scsi/NCR5380.*
 F:	drivers/scsi/arm/cumana_1.c
 F:	drivers/scsi/arm/oak.c
@@ -11594,13 +11634,10 @@
 F:	Documentation/hwmon/nct6775.rst
 F:	drivers/hwmon/nct6775.c
 
-NET_FAILOVER MODULE
-M:	Sridhar Samudrala <sridhar.samudrala@intel.com>
-L:	netdev@vger.kernel.org
-S:	Supported
-F:	drivers/net/net_failover.c
-F:	include/net/net_failover.h
-F:	Documentation/networking/net_failover.rst
+NETDEVSIM
+M:	Jakub Kicinski <kuba@kernel.org>
+S:	Maintained
+F:	drivers/net/netdevsim/*
 
 NETEM NETWORK EMULATOR
 M:	Stephen Hemminger <stephen@networkplumber.org>
@@ -11622,13 +11659,13 @@
 M:	Florian Westphal <fw@strlen.de>
 L:	netfilter-devel@vger.kernel.org
 L:	coreteam@netfilter.org
+S:	Maintained
 W:	http://www.netfilter.org/
 W:	http://www.iptables.org/
 W:	http://www.nftables.org/
 Q:	http://patchwork.ozlabs.org/project/netfilter-devel/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next.git
-S:	Maintained
 F:	include/linux/netfilter*
 F:	include/linux/netfilter/
 F:	include/net/netfilter/
@@ -11636,14 +11673,14 @@
 F:	include/uapi/linux/netfilter/
 F:	net/*/netfilter.c
 F:	net/*/netfilter/
-F:	net/netfilter/
 F:	net/bridge/br_netfilter*.c
+F:	net/netfilter/
 
 NETROM NETWORK LAYER
 M:	Ralf Baechle <ralf@linux-mips.org>
 L:	linux-hams@vger.kernel.org
-W:	http://www.linux-ax25.org/
 S:	Maintained
+W:	http://www.linux-ax25.org/
 F:	include/net/netrom.h
 F:	include/uapi/linux/netrom.h
 F:	net/netrom/
@@ -11656,9 +11693,9 @@
 
 NETWORK BLOCK DEVICE (NBD)
 M:	Josef Bacik <josef@toxicpanda.com>
-S:	Maintained
 L:	linux-block@vger.kernel.org
 L:	nbd@other.debian.org
+S:	Maintained
 F:	Documentation/admin-guide/blockdev/nbd.rst
 F:	drivers/block/nbd.c
 F:	include/trace/events/nbd.h
@@ -11669,37 +11706,37 @@
 L:	netdev@vger.kernel.org
 S:	Maintained
 W:	https://fedorahosted.org/dropwatch/
-F:	net/core/drop_monitor.c
-F:	include/uapi/linux/net_dropmon.h
 F:	include/net/drop_monitor.h
+F:	include/uapi/linux/net_dropmon.h
+F:	net/core/drop_monitor.c
 
 NETWORKING DRIVERS
 M:	"David S. Miller" <davem@davemloft.net>
 L:	netdev@vger.kernel.org
+S:	Odd Fixes
 W:	http://www.linuxfoundation.org/en/Net
 Q:	http://patchwork.ozlabs.org/project/netdev/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git
-S:	Odd Fixes
 F:	Documentation/devicetree/bindings/net/
 F:	drivers/net/
-F:	include/linux/if_*
-F:	include/linux/netdevice.h
 F:	include/linux/etherdevice.h
 F:	include/linux/fcdevice.h
 F:	include/linux/fddidevice.h
 F:	include/linux/hippidevice.h
+F:	include/linux/if_*
 F:	include/linux/inetdevice.h
+F:	include/linux/netdevice.h
 F:	include/uapi/linux/if_*
 F:	include/uapi/linux/netdevice.h
 
 NETWORKING DRIVERS (WIRELESS)
 M:	Kalle Valo <kvalo@codeaurora.org>
 L:	linux-wireless@vger.kernel.org
+S:	Maintained
 Q:	http://patchwork.kernel.org/project/linux-wireless/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next.git
-S:	Maintained
 F:	Documentation/devicetree/bindings/net/wireless/
 F:	drivers/net/wireless/
 
@@ -11709,97 +11746,97 @@
 M:	Florian Fainelli <f.fainelli@gmail.com>
 S:	Maintained
 F:	Documentation/devicetree/bindings/net/dsa/
-F:	net/dsa/
-F:	include/net/dsa.h
+F:	drivers/net/dsa/
 F:	include/linux/dsa/
 F:	include/linux/platform_data/dsa.h
-F:	drivers/net/dsa/
+F:	include/net/dsa.h
+F:	net/dsa/
 
 NETWORKING [GENERAL]
 M:	"David S. Miller" <davem@davemloft.net>
 M:	Jakub Kicinski <kuba@kernel.org>
 L:	netdev@vger.kernel.org
+S:	Maintained
 W:	http://www.linuxfoundation.org/en/Net
 Q:	http://patchwork.ozlabs.org/project/netdev/list/
+B:	mailto:netdev@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git
-B:	mailto:netdev@vger.kernel.org
-S:	Maintained
-F:	net/
-F:	include/net/
+F:	Documentation/networking/
 F:	include/linux/in.h
 F:	include/linux/net.h
 F:	include/linux/netdevice.h
+F:	include/net/
 F:	include/uapi/linux/in.h
 F:	include/uapi/linux/net.h
-F:	include/uapi/linux/netdevice.h
 F:	include/uapi/linux/net_namespace.h
-F:	tools/testing/selftests/net/
+F:	include/uapi/linux/netdevice.h
 F:	lib/net_utils.c
 F:	lib/random32.c
-F:	Documentation/networking/
+F:	net/
+F:	tools/testing/selftests/net/
 
 NETWORKING [IPSEC]
 M:	Steffen Klassert <steffen.klassert@secunet.com>
 M:	Herbert Xu <herbert@gondor.apana.org.au>
 M:	"David S. Miller" <davem@davemloft.net>
 L:	netdev@vger.kernel.org
+S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next.git
-S:	Maintained
-F:	net/xfrm/
-F:	net/key/
-F:	net/ipv4/xfrm*
-F:	net/ipv4/esp4*
-F:	net/ipv4/ah4.c
-F:	net/ipv4/ipcomp.c
-F:	net/ipv4/ip_vti.c
-F:	net/ipv6/xfrm*
-F:	net/ipv6/esp6*
-F:	net/ipv6/ah6.c
-F:	net/ipv6/ipcomp6.c
-F:	net/ipv6/ip6_vti.c
-F:	include/uapi/linux/xfrm.h
 F:	include/net/xfrm.h
+F:	include/uapi/linux/xfrm.h
+F:	net/ipv4/ah4.c
+F:	net/ipv4/esp4*
+F:	net/ipv4/ip_vti.c
+F:	net/ipv4/ipcomp.c
+F:	net/ipv4/xfrm*
+F:	net/ipv6/ah6.c
+F:	net/ipv6/esp6*
+F:	net/ipv6/ip6_vti.c
+F:	net/ipv6/ipcomp6.c
+F:	net/ipv6/xfrm*
+F:	net/key/
+F:	net/xfrm/
 
 NETWORKING [IPv4/IPv6]
 M:	"David S. Miller" <davem@davemloft.net>
 M:	Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
 M:	Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
 L:	netdev@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git
+F:	arch/x86/net/*
+F:	include/net/ip*
 F:	net/ipv4/
 F:	net/ipv6/
-F:	include/net/ip*
-F:	arch/x86/net/*
 
 NETWORKING [LABELED] (NetLabel, Labeled IPsec, SECMARK)
 M:	Paul Moore <paul@paul-moore.com>
-W:	https://github.com/netlabel
 L:	netdev@vger.kernel.org
 L:	linux-security-module@vger.kernel.org
 S:	Maintained
+W:	https://github.com/netlabel
 F:	Documentation/netlabel/
 F:	include/net/calipso.h
 F:	include/net/cipso_ipv4.h
 F:	include/net/netlabel.h
-F:	include/uapi/linux/netfilter/xt_SECMARK.h
 F:	include/uapi/linux/netfilter/xt_CONNSECMARK.h
-F:	net/netlabel/
+F:	include/uapi/linux/netfilter/xt_SECMARK.h
 F:	net/ipv4/cipso_ipv4.c
 F:	net/ipv6/calipso.c
 F:	net/netfilter/xt_CONNSECMARK.c
 F:	net/netfilter/xt_SECMARK.c
+F:	net/netlabel/
 
 NETWORKING [MPTCP]
 M:	Mat Martineau <mathew.j.martineau@linux.intel.com>
 M:	Matthieu Baerts <matthieu.baerts@tessares.net>
 L:	netdev@vger.kernel.org
 L:	mptcp@lists.01.org
+S:	Maintained
 W:	https://github.com/multipath-tcp/mptcp_net-next/wiki
 B:	https://github.com/multipath-tcp/mptcp_net-next/issues
-S:	Maintained
 F:	include/net/mptcp.h
 F:	include/uapi/linux/mptcp.h
 F:	net/mptcp/
@@ -11809,14 +11846,14 @@
 M:	Eric Dumazet <edumazet@google.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	net/ipv4/tcp*.c
-F:	net/ipv4/syncookies.c
-F:	net/ipv6/tcp*.c
-F:	net/ipv6/syncookies.c
-F:	include/uapi/linux/tcp.h
-F:	include/net/tcp.h
 F:	include/linux/tcp.h
+F:	include/net/tcp.h
 F:	include/trace/events/tcp.h
+F:	include/uapi/linux/tcp.h
+F:	net/ipv4/syncookies.c
+F:	net/ipv4/tcp*.c
+F:	net/ipv6/syncookies.c
+F:	net/ipv6/tcp*.c
 
 NETWORKING [TLS]
 M:	Boris Pismenny <borisp@mellanox.com>
@@ -11826,19 +11863,14 @@
 M:	Jakub Kicinski <kuba@kernel.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	net/tls/*
-F:	include/uapi/linux/tls.h
 F:	include/net/tls.h
+F:	include/uapi/linux/tls.h
+F:	net/tls/*
 
 NETWORKING [WIRELESS]
 L:	linux-wireless@vger.kernel.org
 Q:	http://patchwork.kernel.org/project/linux-wireless/list/
 
-NETDEVSIM
-M:	Jakub Kicinski <kuba@kernel.org>
-S:	Maintained
-F:	drivers/net/netdevsim/*
-
 NETXEN (1/10) GbE SUPPORT
 M:	Manish Chopra <manishc@marvell.com>
 M:	Rahul Verma <rahulv@marvell.com>
@@ -11847,49 +11879,57 @@
 S:	Supported
 F:	drivers/net/ethernet/qlogic/netxen/
 
+NET_FAILOVER MODULE
+M:	Sridhar Samudrala <sridhar.samudrala@intel.com>
+L:	netdev@vger.kernel.org
+S:	Supported
+F:	Documentation/networking/net_failover.rst
+F:	drivers/net/net_failover.c
+F:	include/net/net_failover.h
+
 NEXTHOP
 M:	David Ahern <dsahern@kernel.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
+F:	include/net/netns/nexthop.h
 F:	include/net/nexthop.h
 F:	include/uapi/linux/nexthop.h
-F:	include/net/netns/nexthop.h
 F:	net/ipv4/nexthop.c
 
 NFC SUBSYSTEM
 L:	netdev@vger.kernel.org
 S:	Orphan
-F:	net/nfc/
-F:	include/net/nfc/
-F:	include/uapi/linux/nfc.h
+F:	Documentation/devicetree/bindings/net/nfc/
 F:	drivers/nfc/
 F:	include/linux/platform_data/nfcmrvl.h
-F:	Documentation/devicetree/bindings/net/nfc/
+F:	include/net/nfc/
+F:	include/uapi/linux/nfc.h
+F:	net/nfc/
 
 NFS, SUNRPC, AND LOCKD CLIENTS
 M:	Trond Myklebust <trond.myklebust@hammerspace.com>
 M:	Anna Schumaker <anna.schumaker@netapp.com>
 L:	linux-nfs@vger.kernel.org
+S:	Maintained
 W:	http://client.linux-nfs.org
 T:	git git://git.linux-nfs.org/projects/trondmy/linux-nfs.git
-S:	Maintained
 F:	fs/lockd/
 F:	fs/nfs/
 F:	fs/nfs_common/
-F:	net/sunrpc/
 F:	include/linux/lockd/
 F:	include/linux/nfs*
 F:	include/linux/sunrpc/
 F:	include/uapi/linux/nfs*
 F:	include/uapi/linux/sunrpc/
+F:	net/sunrpc/
 
 NILFS2 FILESYSTEM
 M:	Ryusuke Konishi <konishi.ryusuke@gmail.com>
 L:	linux-nilfs@vger.kernel.org
+S:	Supported
 W:	https://nilfs.sourceforge.io/
 W:	https://nilfs.osdn.jp/
 T:	git git://github.com/konis/nilfs2.git
-S:	Supported
 F:	Documentation/filesystems/nilfs2.rst
 F:	fs/nilfs2/
 F:	include/trace/events/nilfs2.h
@@ -11898,24 +11938,23 @@
 
 NINJA SCSI-3 / NINJA SCSI-32Bi (16bit/CardBus) PCMCIA SCSI HOST ADAPTER DRIVER
 M:	YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>
-W:	http://www.netlab.is.tsukuba.ac.jp/~yokota/izumi/ninja/
 S:	Maintained
-F:	Documentation/scsi/NinjaSCSI.txt
+W:	http://www.netlab.is.tsukuba.ac.jp/~yokota/izumi/ninja/
+F:	Documentation/scsi/NinjaSCSI.rst
 F:	drivers/scsi/pcmcia/nsp_*
 
 NINJA SCSI-32Bi/UDE PCI/CARDBUS SCSI HOST ADAPTER DRIVER
 M:	GOTO Masanori <gotom@debian.or.jp>
 M:	YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>
-W:	http://www.netlab.is.tsukuba.ac.jp/~yokota/izumi/ninja/
 S:	Maintained
-F:	Documentation/scsi/NinjaSCSI.txt
+W:	http://www.netlab.is.tsukuba.ac.jp/~yokota/izumi/ninja/
+F:	Documentation/scsi/NinjaSCSI.rst
 F:	drivers/scsi/nsp32*
 
 NIOS2 ARCHITECTURE
 M:	Ley Foon Tan <ley.foon.tan@intel.com>
-L:	nios2-dev@lists.rocketboards.org (moderated for non-subscribers)
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2.git
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2.git
 F:	arch/nios2/
 
 NOHZ, DYNTICKS SUPPORT
@@ -11923,29 +11962,29 @@
 M:	Thomas Gleixner <tglx@linutronix.de>
 M:	Ingo Molnar <mingo@kernel.org>
 L:	linux-kernel@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/nohz
 S:	Maintained
-F:	kernel/time/tick*.*
-F:	include/linux/tick.h
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/nohz
 F:	include/linux/sched/nohz.h
+F:	include/linux/tick.h
+F:	kernel/time/tick*.*
 
 NOKIA N900 CAMERA SUPPORT (ET8EK8 SENSOR, AD5820 FOCUS)
 M:	Pavel Machek <pavel@ucw.cz>
 M:	Sakari Ailus <sakari.ailus@iki.fi>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-F:	drivers/media/i2c/et8ek8
 F:	drivers/media/i2c/ad5820.c
+F:	drivers/media/i2c/et8ek8
 
 NOKIA N900 POWER SUPPLY DRIVERS
-R:	Pali Rohár <pali.rohar@gmail.com>
-F:	include/linux/power/bq2415x_charger.h
-F:	include/linux/power/bq27xxx_battery.h
+R:	Pali Rohár <pali@kernel.org>
 F:	drivers/power/supply/bq2415x_charger.c
 F:	drivers/power/supply/bq27xxx_battery.c
 F:	drivers/power/supply/bq27xxx_battery_i2c.c
 F:	drivers/power/supply/isp1704_charger.c
 F:	drivers/power/supply/rx51_battery.c
+F:	include/linux/power/bq2415x_charger.h
+F:	include/linux/power/bq27xxx_battery.h
 
 NOLIBC HEADER FILE
 M:	Willy Tarreau <w@1wt.eu>
@@ -11956,8 +11995,8 @@
 NSDEPS
 M:	Matthias Maennich <maennich@google.com>
 S:	Maintained
-F:	scripts/nsdeps
 F:	Documentation/core-api/symbol-namespaces.rst
+F:	scripts/nsdeps
 
 NTB AMD DRIVER
 M:	Sanjay R Mehta <sanju.mehta@amd.com>
@@ -11974,8 +12013,8 @@
 S:	Supported
 W:	https://github.com/jonmason/ntb/wiki
 T:	git git://github.com/jonmason/ntb.git
-F:	drivers/ntb/
 F:	drivers/net/ntb_netdev.c
+F:	drivers/ntb/
 F:	include/linux/ntb.h
 F:	include/linux/ntb_transport.h
 F:	tools/testing/selftests/ntb/
@@ -11997,9 +12036,9 @@
 NTFS FILESYSTEM
 M:	Anton Altaparmakov <anton@tuxera.com>
 L:	linux-ntfs-dev@lists.sourceforge.net
+S:	Supported
 W:	http://www.tuxera.com/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs.git
-S:	Supported
 F:	Documentation/filesystems/ntfs.rst
 F:	fs/ntfs/
 
@@ -12016,8 +12055,8 @@
 M:	Antonino Daplas <adaplas@gmail.com>
 L:	linux-fbdev@vger.kernel.org
 S:	Maintained
-F:	drivers/video/fbdev/riva/
 F:	drivers/video/fbdev/nvidia/
+F:	drivers/video/fbdev/riva/
 
 NVM EXPRESS DRIVER
 M:	Keith Busch <kbusch@kernel.org>
@@ -12025,9 +12064,9 @@
 M:	Christoph Hellwig <hch@lst.de>
 M:	Sagi Grimberg <sagi@grimberg.me>
 L:	linux-nvme@lists.infradead.org
-T:	git://git.infradead.org/nvme.git
-W:	http://git.infradead.org/nvme.git
 S:	Supported
+W:	http://git.infradead.org/nvme.git
+T:	git://git.infradead.org/nvme.git
 F:	drivers/nvme/host/
 F:	include/linux/nvme.h
 F:	include/uapi/linux/nvme_ioctl.h
@@ -12036,38 +12075,46 @@
 M:	James Smart <james.smart@broadcom.com>
 L:	linux-nvme@lists.infradead.org
 S:	Supported
-F:	include/linux/nvme-fc.h
-F:	include/linux/nvme-fc-driver.h
 F:	drivers/nvme/host/fc.c
 F:	drivers/nvme/target/fc.c
 F:	drivers/nvme/target/fcloop.c
+F:	include/linux/nvme-fc-driver.h
+F:	include/linux/nvme-fc.h
 
 NVM EXPRESS TARGET DRIVER
 M:	Christoph Hellwig <hch@lst.de>
 M:	Sagi Grimberg <sagi@grimberg.me>
 M:	Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
 L:	linux-nvme@lists.infradead.org
-T:	git://git.infradead.org/nvme.git
-W:	http://git.infradead.org/nvme.git
 S:	Supported
+W:	http://git.infradead.org/nvme.git
+T:	git://git.infradead.org/nvme.git
 F:	drivers/nvme/target/
 
 NVMEM FRAMEWORK
 M:	Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
 S:	Maintained
-F:	drivers/nvmem/
-F:	Documentation/devicetree/bindings/nvmem/
 F:	Documentation/ABI/stable/sysfs-bus-nvmem
+F:	Documentation/devicetree/bindings/nvmem/
+F:	drivers/nvmem/
 F:	include/linux/nvmem-consumer.h
 F:	include/linux/nvmem-provider.h
 
+NXP FSPI DRIVER
+M:	Ashish Kumar <ashish.kumar@nxp.com>
+R:	Yogesh Gaur <yogeshgaur.83@gmail.com>
+L:	linux-spi@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt
+F:	drivers/spi/spi-nxp-fspi.c
+
 NXP FXAS21002C DRIVER
 M:	Rui Miguel Silva <rmfrfs@gmail.com>
 L:	linux-iio@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt
-F:	drivers/iio/gyro/fxas21002c_core.c
 F:	drivers/iio/gyro/fxas21002c.h
+F:	drivers/iio/gyro/fxas21002c_core.c
 F:	drivers/iio/gyro/fxas21002c_i2c.c
 F:	drivers/iio/gyro/fxas21002c_spi.c
 
@@ -12112,17 +12159,9 @@
 M:	Jiri Pirko <jiri@mellanox.com>
 L:	netdev@vger.kernel.org
 S:	Supported
+F:	include/linux/objagg.h
 F:	lib/objagg.c
 F:	lib/test_objagg.c
-F:	include/linux/objagg.h
-
-NXP FSPI DRIVER
-R:	Yogesh Gaur <yogeshgaur.83@gmail.com>
-M:	Ashish Kumar <ashish.kumar@nxp.com>
-L:	linux-spi@vger.kernel.org
-S:	Maintained
-F:	drivers/spi/spi-nxp-fspi.c
-F:	Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt
 
 OBJTOOL
 M:	Josh Poimboeuf <jpoimboe@redhat.com>
@@ -12135,12 +12174,12 @@
 M:	Andrew Donnellan <ajd@linux.ibm.com>
 L:	linuxppc-dev@lists.ozlabs.org
 S:	Supported
-F:	arch/powerpc/platforms/powernv/ocxl.c
+F:	Documentation/userspace-api/accelerators/ocxl.rst
 F:	arch/powerpc/include/asm/pnv-ocxl.h
+F:	arch/powerpc/platforms/powernv/ocxl.c
 F:	drivers/misc/ocxl/
 F:	include/misc/ocxl*
 F:	include/uapi/misc/ocxl.h
-F:	Documentation/userspace-api/accelerators/ocxl.rst
 
 OMAP AUDIO SUPPORT
 M:	Peter Ujfalusi <peter.ujfalusi@ti.com>
@@ -12148,9 +12187,9 @@
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 L:	linux-omap@vger.kernel.org
 S:	Maintained
+F:	sound/soc/ti/n810.c
 F:	sound/soc/ti/omap*
 F:	sound/soc/ti/rx51.c
-F:	sound/soc/ti/n810.c
 F:	sound/soc/ti/sdma-pcm.*
 
 OMAP CLOCK FRAMEWORK SUPPORT
@@ -12165,11 +12204,11 @@
 L:	linux-omap@vger.kernel.org
 L:	devicetree@vger.kernel.org
 S:	Maintained
-F:	arch/arm/boot/dts/*omap*
 F:	arch/arm/boot/dts/*am3*
 F:	arch/arm/boot/dts/*am4*
 F:	arch/arm/boot/dts/*am5*
 F:	arch/arm/boot/dts/*dra7*
+F:	arch/arm/boot/dts/*omap*
 F:	arch/arm/boot/dts/logicpd-som-lv*
 F:	arch/arm/boot/dts/logicpd-torpedo*
 
@@ -12177,8 +12216,8 @@
 L:	linux-omap@vger.kernel.org
 L:	linux-fbdev@vger.kernel.org
 S:	Orphan
-F:	drivers/video/fbdev/omap2/
 F:	Documentation/arm/omap/dss.rst
+F:	drivers/video/fbdev/omap2/
 
 OMAP FRAMEBUFFER SUPPORT
 L:	linux-fbdev@vger.kernel.org
@@ -12191,8 +12230,8 @@
 M:	Tony Lindgren <tony@atomide.com>
 L:	linux-omap@vger.kernel.org
 S:	Maintained
-F:	drivers/memory/omap-gpmc.c
 F:	arch/arm/mach-omap2/*gpmc*
+F:	drivers/memory/omap-gpmc.c
 
 OMAP GPIO DRIVER
 M:	Grygorii Strashko <grygorii.strashko@ti.com>
@@ -12279,8 +12318,8 @@
 L:	linux-usb@vger.kernel.org
 L:	linux-omap@vger.kernel.org
 S:	Orphan
-F:	drivers/usb/*/*omap*
 F:	arch/arm/*omap*/usb*
+F:	drivers/usb/*/*omap*
 
 OMAP/NEWFLOW NANOBONE MACHINE SUPPORT
 M:	Mark Jackson <mpfj@newflow.co.uk>
@@ -12292,27 +12331,27 @@
 M:	Aaro Koskinen <aaro.koskinen@iki.fi>
 M:	Tony Lindgren <tony@atomide.com>
 L:	linux-omap@vger.kernel.org
+S:	Maintained
 Q:	http://patchwork.kernel.org/project/linux-omap/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git
-S:	Maintained
+F:	arch/arm/configs/omap1_defconfig
 F:	arch/arm/mach-omap1/
 F:	arch/arm/plat-omap/
-F:	arch/arm/configs/omap1_defconfig
 F:	drivers/i2c/busses/i2c-omap.c
-F:	include/linux/platform_data/i2c-omap.h
 F:	include/linux/platform_data/ams-delta-fiq.h
+F:	include/linux/platform_data/i2c-omap.h
 
 OMAP2+ SUPPORT
 M:	Tony Lindgren <tony@atomide.com>
 L:	linux-omap@vger.kernel.org
+S:	Maintained
 W:	http://www.muru.com/linux/omap/
 W:	http://linux.omap.com/
 Q:	http://patchwork.kernel.org/project/linux-omap/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git
-S:	Maintained
+F:	arch/arm/configs/omap2plus_defconfig
 F:	arch/arm/mach-omap2/
 F:	arch/arm/plat-omap/
-F:	arch/arm/configs/omap2plus_defconfig
 F:	drivers/bus/ti-sysc.c
 F:	drivers/i2c/busses/i2c-omap.c
 F:	drivers/irqchip/irq-omap-intc.c
@@ -12336,12 +12375,6 @@
 F:	include/linux/platform_data/i2c-omap.h
 F:	include/linux/platform_data/ti-sysc.h
 
-ONION OMEGA2+ BOARD
-M:	Harvey Hunt <harveyhuntnexus@gmail.com>
-L:	linux-mips@vger.kernel.org
-S:	Maintained
-F:	arch/mips/boot/dts/ralink/omega2p.dts
-
 OMFS FILESYSTEM
 M:	Bob Copeland <me@bobcopeland.com>
 L:	linux-karma-devel@lists.sourceforge.net
@@ -12364,85 +12397,92 @@
 OMNIVISION OV13858 SENSOR DRIVER
 M:	Sakari Ailus <sakari.ailus@linux.intel.com>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/i2c/ov13858.c
 
 OMNIVISION OV2680 SENSOR DRIVER
 M:	Rui Miguel Silva <rmfrfs@gmail.com>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
-F:	drivers/media/i2c/ov2680.c
+T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/devicetree/bindings/media/i2c/ov2680.txt
+F:	drivers/media/i2c/ov2680.c
 
 OMNIVISION OV2685 SENSOR DRIVER
 M:	Shunqian Zheng <zhengsq@rock-chips.com>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/i2c/ov2685.c
 
 OMNIVISION OV5640 SENSOR DRIVER
 M:	Steve Longerbeam <slongerbeam@gmail.com>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/i2c/ov5640.c
 
 OMNIVISION OV5647 SENSOR DRIVER
 M:	Luis Oliveira <lolivei@synopsys.com>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/i2c/ov5647.c
 
 OMNIVISION OV5670 SENSOR DRIVER
 M:	Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>
 M:	Hyungwoo Yang <hyungwoo.yang@intel.com>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/i2c/ov5670.c
 
 OMNIVISION OV5675 SENSOR DRIVER
 M:	Shawn Tu <shawnx.tu@intel.com>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/i2c/ov5675.c
 
 OMNIVISION OV5695 SENSOR DRIVER
 M:	Shunqian Zheng <zhengsq@rock-chips.com>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/i2c/ov5695.c
 
 OMNIVISION OV7670 SENSOR DRIVER
 M:	Jonathan Corbet <corbet@lwn.net>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
-F:	drivers/media/i2c/ov7670.c
+T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/devicetree/bindings/media/i2c/ov7670.txt
+F:	drivers/media/i2c/ov7670.c
 
 OMNIVISION OV772x SENSOR DRIVER
 M:	Jacopo Mondi <jacopo@jmondi.org>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Odd fixes
+T:	git git://linuxtv.org/media_tree.git
+F:	Documentation/devicetree/bindings/media/i2c/ov772x.txt
 F:	drivers/media/i2c/ov772x.c
 F:	include/media/i2c/ov772x.h
-F:	Documentation/devicetree/bindings/media/i2c/ov772x.txt
 
 OMNIVISION OV7740 SENSOR DRIVER
 M:	Wenyou Yang <wenyou.yang@microchip.com>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
-F:	drivers/media/i2c/ov7740.c
+T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/devicetree/bindings/media/i2c/ov7740.txt
+F:	drivers/media/i2c/ov7740.c
+
+OMNIVISION OV8856 SENSOR DRIVER
+M:	Ben Kao <ben.kao@intel.com>
+L:	linux-media@vger.kernel.org
+S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
+F:	drivers/media/i2c/ov8856.c
 
 OMNIVISION OV9640 SENSOR DRIVER
 M:	Petr Cvek <petrcvekcz@gmail.com>
@@ -12450,22 +12490,15 @@
 S:	Maintained
 F:	drivers/media/i2c/ov9640.*
 
-OMNIVISION OV8856 SENSOR DRIVER
-M:	Ben Kao <ben.kao@intel.com>
-L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
-S:	Maintained
-F:	drivers/media/i2c/ov8856.c
-
 OMNIVISION OV9650 SENSOR DRIVER
 M:	Sakari Ailus <sakari.ailus@linux.intel.com>
 R:	Akinobu Mita <akinobu.mita@gmail.com>
 R:	Sylwester Nawrocki <s.nawrocki@samsung.com>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
-F:	drivers/media/i2c/ov9650.c
+T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/devicetree/bindings/media/i2c/ov9650.txt
+F:	drivers/media/i2c/ov9650.c
 
 ONENAND FLASH DRIVER
 M:	Kyungmin Park <kyungmin.park@samsung.com>
@@ -12474,6 +12507,12 @@
 F:	drivers/mtd/nand/onenand/
 F:	include/linux/mtd/onenand*.h
 
+ONION OMEGA2+ BOARD
+M:	Harvey Hunt <harveyhuntnexus@gmail.com>
+L:	linux-mips@vger.kernel.org
+S:	Maintained
+F:	arch/mips/boot/dts/ralink/omega2p.dts
+
 OP-TEE DRIVER
 M:	Jens Wiklander <jens.wiklander@linaro.org>
 L:	tee-dev@lists.linaro.org
@@ -12508,21 +12547,20 @@
 M:	Rob Herring <robh+dt@kernel.org>
 M:	Frank Rowand <frowand.list@gmail.com>
 L:	devicetree@vger.kernel.org
+S:	Maintained
 W:	http://www.devicetree.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git
-S:	Maintained
+F:	Documentation/ABI/testing/sysfs-firmware-ofw
 F:	drivers/of/
 F:	include/linux/of*.h
 F:	scripts/dtc/
-F:	Documentation/ABI/testing/sysfs-firmware-ofw
 
 OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS
 M:	Rob Herring <robh+dt@kernel.org>
-M:	Mark Rutland <mark.rutland@arm.com>
 L:	devicetree@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git
-Q:	http://patchwork.ozlabs.org/project/devicetree-bindings/list/
 S:	Maintained
+Q:	http://patchwork.ozlabs.org/project/devicetree-bindings/list/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git
 F:	Documentation/devicetree/
 F:	arch/*/boot/dts/
 F:	include/dt-bindings/
@@ -12541,10 +12579,10 @@
 M:	Jonas Bonn <jonas@southpole.se>
 M:	Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
 M:	Stafford Horne <shorne@gmail.com>
-T:	git git://github.com/openrisc/linux.git
 L:	openrisc@lists.librecores.org
-W:	http://openrisc.io
 S:	Maintained
+W:	http://openrisc.io
+T:	git git://github.com/openrisc/linux.git
 F:	Documentation/devicetree/bindings/openrisc/
 F:	Documentation/openrisc/
 F:	arch/openrisc/
@@ -12555,10 +12593,10 @@
 M:	Pravin B Shelar <pshelar@ovn.org>
 L:	netdev@vger.kernel.org
 L:	dev@openvswitch.org
-W:	http://openvswitch.org
 S:	Maintained
-F:	net/openvswitch/
+W:	http://openvswitch.org
 F:	include/uapi/linux/openvswitch.h
+F:	net/openvswitch/
 
 OPERATING PERFORMANCE POINTS (OPP)
 M:	Viresh Kumar <vireshk@kernel.org>
@@ -12567,16 +12605,16 @@
 L:	linux-pm@vger.kernel.org
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm.git
+F:	Documentation/devicetree/bindings/opp/
+F:	Documentation/power/opp.rst
 F:	drivers/opp/
 F:	include/linux/pm_opp.h
-F:	Documentation/power/opp.rst
-F:	Documentation/devicetree/bindings/opp/
 
 OPL4 DRIVER
 M:	Clemens Ladisch <clemens@ladisch.de>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
 F:	sound/drivers/opl4/
 
 OPROFILE
@@ -12593,86 +12631,76 @@
 M:	Joel Becker <jlbec@evilplan.org>
 M:	Joseph Qi <joseph.qi@linux.alibaba.com>
 L:	ocfs2-devel@oss.oracle.com (moderated for non-subscribers)
-W:	http://ocfs2.wiki.kernel.org
 S:	Supported
-F:	Documentation/filesystems/ocfs2.rst
+W:	http://ocfs2.wiki.kernel.org
 F:	Documentation/filesystems/dlmfs.rst
+F:	Documentation/filesystems/ocfs2.rst
 F:	fs/ocfs2/
 
 ORANGEFS FILESYSTEM
 M:	Mike Marshall <hubcap@omnibond.com>
 R:	Martin Brandenburg <martin@omnibond.com>
 L:	devel@lists.orangefs.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux.git
 S:	Supported
-F:	fs/orangefs/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux.git
 F:	Documentation/filesystems/orangefs.rst
+F:	fs/orangefs/
 
 ORINOCO DRIVER
 L:	linux-wireless@vger.kernel.org
+S:	Orphan
 W:	http://wireless.kernel.org/en/users/Drivers/orinoco
 W:	http://www.nongnu.org/orinoco/
-S:	Orphan
 F:	drivers/net/wireless/intersil/orinoco/
 
 OV2659 OMNIVISION SENSOR DRIVER
 M:	"Lad, Prabhakar" <prabhakar.csengg@gmail.com>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/mhadli/v4l-dvb-davinci_devices.git
-S:	Maintained
 F:	drivers/media/i2c/ov2659.c
 F:	include/media/i2c/ov2659.h
 
 OVERLAY FILESYSTEM
 M:	Miklos Szeredi <miklos@szeredi.hu>
 L:	linux-unionfs@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs.git
 S:	Supported
-F:	fs/overlayfs/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs.git
 F:	Documentation/filesystems/overlayfs.rst
+F:	fs/overlayfs/
 
 P54 WIRELESS DRIVER
 M:	Christian Lamparter <chunkeey@googlemail.com>
 L:	linux-wireless@vger.kernel.org
-W:	http://wireless.kernel.org/en/users/Drivers/p54
 S:	Maintained
+W:	http://wireless.kernel.org/en/users/Drivers/p54
 F:	drivers/net/wireless/intersil/p54/
 
-PA SEMI ETHERNET DRIVER
-L:	netdev@vger.kernel.org
-S:	Orphan
-F:	drivers/net/ethernet/pasemi/*
-
-PA SEMI SMBUS DRIVER
-L:	linux-i2c@vger.kernel.org
-S:	Orphan
-F:	drivers/i2c/busses/i2c-pasemi.c
-
 PACKING
 M:	Vladimir Oltean <olteanv@gmail.com>
 L:	netdev@vger.kernel.org
 S:	Supported
-F:	lib/packing.c
-F:	include/linux/packing.h
 F:	Documentation/core-api/packing.rst
+F:	include/linux/packing.h
+F:	lib/packing.c
 
 PADATA PARALLEL EXECUTION MECHANISM
 M:	Steffen Klassert <steffen.klassert@secunet.com>
 L:	linux-crypto@vger.kernel.org
 S:	Maintained
-F:	kernel/padata.c
-F:	include/linux/padata.h
 F:	Documentation/core-api/padata.rst
+F:	include/linux/padata.h
+F:	kernel/padata.c
 
 PAGE POOL
 M:	Jesper Dangaard Brouer <hawk@kernel.org>
 M:	Ilias Apalodimas <ilias.apalodimas@linaro.org>
 L:	netdev@vger.kernel.org
 S:	Supported
-F:	net/core/page_pool.c
 F:	include/net/page_pool.h
+F:	net/core/page_pool.c
 
 PANASONIC LAPTOP ACPI EXTRAS DRIVER
 M:	Harald Welte <laforge@gnumonks.org>
@@ -12699,11 +12727,11 @@
 M:	Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
 L:	linux-parport@lists.infradead.org (subscribers-only)
 S:	Maintained
+F:	Documentation/driver-api/parport*.rst
+F:	drivers/char/ppdev.c
 F:	drivers/parport/
 F:	include/linux/parport*.h
-F:	drivers/char/ppdev.c
 F:	include/uapi/linux/ppdev.h
-F:	Documentation/driver-api/parport*.rst
 
 PARAVIRT_OPS INTERFACE
 M:	Juergen Gross <jgross@suse.com>
@@ -12712,8 +12740,8 @@
 L:	virtualization@lists.linux-foundation.org
 S:	Supported
 F:	Documentation/virt/paravirt_ops.rst
-F:	arch/*/kernel/paravirt*
 F:	arch/*/include/asm/paravirt*.h
+F:	arch/*/kernel/paravirt*
 F:	include/linux/hypervisor.h
 
 PARIDE DRIVERS FOR PARALLEL PORT IDE DEVICES
@@ -12727,22 +12755,22 @@
 M:	"James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
 M:	Helge Deller <deller@gmx.de>
 L:	linux-parisc@vger.kernel.org
+S:	Maintained
 W:	http://www.parisc-linux.org/
 Q:	http://patchwork.kernel.org/project/linux-parisc/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux.git
-S:	Maintained
-F:	arch/parisc/
 F:	Documentation/parisc/
-F:	drivers/parisc/
+F:	arch/parisc/
 F:	drivers/char/agp/parisc-agp.c
 F:	drivers/input/misc/hp_sdc_rtc.c
 F:	drivers/input/serio/gscps2.c
 F:	drivers/input/serio/hp_sdc*
+F:	drivers/parisc/
 F:	drivers/parport/parport_gsc.*
 F:	drivers/tty/serial/8250/8250_gsc.c
-F:	drivers/video/fbdev/sti*
 F:	drivers/video/console/sti*
+F:	drivers/video/fbdev/sti*
 F:	drivers/video/logo/logo_parisc*
 F:	include/linux/hp_sdc.h
 
@@ -12750,9 +12778,9 @@
 M:	Jiri Pirko <jiri@mellanox.com>
 L:	netdev@vger.kernel.org
 S:	Supported
+F:	include/linux/parman.h
 F:	lib/parman.c
 F:	lib/test_parman.c
-F:	include/linux/parman.h
 
 PC ENGINES APU BOARD DRIVER
 M:	Enrico Weigelt, metux IT consult <info@metux.net>
@@ -12839,7 +12867,7 @@
 M:	Tom Joseph <tjoseph@cadence.com>
 L:	linux-pci@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/pci/cdns,*.txt
+F:	Documentation/devicetree/bindings/pci/cdns,*
 F:	drivers/pci/controller/cadence/
 
 PCI DRIVER FOR FREESCALE LAYERSCAPE
@@ -12881,12 +12909,12 @@
 M:	Logan Gunthorpe <logang@deltatee.com>
 L:	linux-pci@vger.kernel.org
 S:	Maintained
-F:	Documentation/driver-api/switchtec.rst
 F:	Documentation/ABI/testing/sysfs-class-switchtec
-F:	drivers/pci/switch/switchtec*
-F:	include/uapi/linux/switchtec_ioctl.h
-F:	include/linux/switchtec.h
+F:	Documentation/driver-api/switchtec.rst
 F:	drivers/ntb/hw/mscc/
+F:	drivers/pci/switch/switchtec*
+F:	include/linux/switchtec.h
+F:	include/uapi/linux/switchtec_ioctl.h
 
 PCI DRIVER FOR MOBIVEIL PCIE IP
 M:	Karthikeyan Mitran <m.karthikeyan@mobiveil.co.in>
@@ -12894,7 +12922,7 @@
 L:	linux-pci@vger.kernel.org
 S:	Supported
 F:	Documentation/devicetree/bindings/pci/mobiveil-pcie.txt
-F:	drivers/pci/controller/pcie-mobiveil.c
+F:	drivers/pci/controller/mobiveil/pcie-mobiveil*
 
 PCI DRIVER FOR MVEBU (Marvell Armada 370 and Armada XP SOC support)
 M:	Thomas Petazzoni <thomas.petazzoni@bootlin.com>
@@ -12912,6 +12940,14 @@
 F:	Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
 F:	drivers/pci/controller/pci-tegra.c
 
+PCI DRIVER FOR NXP LAYERSCAPE GEN4 CONTROLLER
+M:	Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
+L:	linux-pci@vger.kernel.org
+L:	linux-arm-kernel@lists.infradead.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt
+F:	drivers/pci/controller/mobibeil/pcie-layerscape-gen4.c
+
 PCI DRIVER FOR RENESAS R-CAR
 M:	Marek Vasut <marek.vasut+renesas@gmail.com>
 M:	Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
@@ -12951,14 +12987,21 @@
 S:	Maintained
 F:	drivers/pci/controller/dwc/pci-keystone.c
 
+PCI DRIVER FOR V3 SEMICONDUCTOR V360EPC
+M:	Linus Walleij <linus.walleij@linaro.org>
+L:	linux-pci@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt
+F:	drivers/pci/controller/pci-v3-semi.c
+
 PCI ENDPOINT SUBSYSTEM
 M:	Kishon Vijay Abraham I <kishon@ti.com>
 M:	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
 L:	linux-pci@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kishon/pci-endpoint.git
 S:	Supported
-F:	drivers/pci/endpoint/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kishon/pci-endpoint.git
 F:	drivers/misc/pci_endpoint_test.c
+F:	drivers/pci/endpoint/
 F:	tools/pci/
 
 PCI ENHANCED ERROR HANDLING (EEH) FOR POWERPC
@@ -12968,13 +13011,13 @@
 L:	linuxppc-dev@lists.ozlabs.org
 S:	Supported
 F:	Documentation/PCI/pci-error-recovery.rst
+F:	Documentation/powerpc/eeh-pci-error-recovery.rst
+F:	arch/powerpc/include/*/eeh*.h
+F:	arch/powerpc/kernel/eeh*.c
+F:	arch/powerpc/platforms/*/eeh*.c
 F:	drivers/pci/pcie/aer.c
 F:	drivers/pci/pcie/dpc.c
 F:	drivers/pci/pcie/err.c
-F:	Documentation/powerpc/eeh-pci-error-recovery.rst
-F:	arch/powerpc/kernel/eeh*.c
-F:	arch/powerpc/platforms/*/eeh*.c
-F:	arch/powerpc/include/*/eeh*.h
 
 PCI ERROR RECOVERY
 M:	Linas Vepstas <linasvepstas@gmail.com>
@@ -12998,34 +13041,34 @@
 F:	Documentation/devicetree/bindings/pci/xgene-pci-msi.txt
 F:	drivers/pci/controller/pci-xgene-msi.c
 
-PCI SUBSYSTEM
-M:	Bjorn Helgaas <bhelgaas@google.com>
-L:	linux-pci@vger.kernel.org
-Q:	http://patchwork.ozlabs.org/project/linux-pci/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git
-S:	Supported
-F:	Documentation/devicetree/bindings/pci/
-F:	Documentation/PCI/
-F:	drivers/acpi/pci*
-F:	drivers/pci/
-F:	include/asm-generic/pci*
-F:	include/linux/pci*
-F:	include/linux/of_pci.h
-F:	include/uapi/linux/pci*
-F:	lib/pci*
-F:	arch/x86/pci/
-F:	arch/x86/kernel/quirks.c
-F:	arch/x86/kernel/early-quirks.c
-
 PCI NATIVE HOST BRIDGE AND ENDPOINT DRIVERS
 M:	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
 R:	Andrew Murray <amurray@thegoodpenguin.co.uk>
 L:	linux-pci@vger.kernel.org
+S:	Supported
 Q:	http://patchwork.ozlabs.org/project/linux-pci/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lpieralisi/pci.git/
-S:	Supported
 F:	drivers/pci/controller/
 
+PCI SUBSYSTEM
+M:	Bjorn Helgaas <bhelgaas@google.com>
+L:	linux-pci@vger.kernel.org
+S:	Supported
+Q:	http://patchwork.ozlabs.org/project/linux-pci/list/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git
+F:	Documentation/PCI/
+F:	Documentation/devicetree/bindings/pci/
+F:	arch/x86/kernel/early-quirks.c
+F:	arch/x86/kernel/quirks.c
+F:	arch/x86/pci/
+F:	drivers/acpi/pci*
+F:	drivers/pci/
+F:	include/asm-generic/pci*
+F:	include/linux/of_pci.h
+F:	include/linux/pci*
+F:	include/uapi/linux/pci*
+F:	lib/pci*
+
 PCIE DRIVER FOR AMAZON ANNAPURNA LABS
 M:	Jonathan Chocron <jonnyc@amazon.com>
 L:	linux-pci@vger.kernel.org
@@ -13100,13 +13143,6 @@
 F:	Documentation/devicetree/bindings/pci/rockchip-pcie*
 F:	drivers/pci/controller/pcie-rockchip*
 
-PCI DRIVER FOR V3 SEMICONDUCTOR V360EPC
-M:	Linus Walleij <linus.walleij@linaro.org>
-L:	linux-pci@vger.kernel.org
-S:	Maintained
-F:	Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt
-F:	drivers/pci/controller/pci-v3-semi.c
-
 PCIE DRIVER FOR SOCIONEXT UNIPHIER
 M:	Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
 L:	linux-pci@vger.kernel.org
@@ -13122,12 +13158,12 @@
 
 PCMCIA SUBSYSTEM
 M:	Dominik Brodowski <linux@dominikbrodowski.net>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia.git
 S:	Odd Fixes
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia.git
 F:	Documentation/pcmcia/
-F:	tools/pcmcia/
 F:	drivers/pcmcia/
 F:	include/pcmcia/
+F:	tools/pcmcia/
 
 PCNET32 NETWORK DRIVER
 M:	Don Fry <pcnet32@frontier.com>
@@ -13160,11 +13196,11 @@
 M:	Dennis Zhou <dennis@kernel.org>
 M:	Tejun Heo <tj@kernel.org>
 M:	Christoph Lameter <cl@linux.com>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu.git
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu.git
+F:	arch/*/include/asm/percpu.h
 F:	include/linux/percpu*.h
 F:	mm/percpu*.c
-F:	arch/*/include/asm/percpu.h
 
 PER-TASK DELAY ACCOUNTING
 M:	Balbir Singh <bsingharora@gmail.com>
@@ -13181,18 +13217,18 @@
 R:	Jiri Olsa <jolsa@redhat.com>
 R:	Namhyung Kim <namhyung@kernel.org>
 L:	linux-kernel@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git perf/core
 S:	Supported
-F:	kernel/events/*
-F:	include/linux/perf_event.h
-F:	include/uapi/linux/perf_event.h
-F:	arch/*/kernel/perf_event*.c
-F:	arch/*/kernel/*/perf_event*.c
-F:	arch/*/kernel/*/*/perf_event*.c
-F:	arch/*/include/asm/perf_event.h
-F:	arch/*/kernel/perf_callchain.c
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git perf/core
 F:	arch/*/events/*
 F:	arch/*/events/*/*
+F:	arch/*/include/asm/perf_event.h
+F:	arch/*/kernel/*/*/perf_event*.c
+F:	arch/*/kernel/*/perf_event*.c
+F:	arch/*/kernel/perf_callchain.c
+F:	arch/*/kernel/perf_event*.c
+F:	include/linux/perf_event.h
+F:	include/uapi/linux/perf_event.h
+F:	kernel/events/*
 F:	tools/perf/
 
 PERFORMANCE EVENTS SUBSYSTEM ARM64 PMU EVENTS
@@ -13216,12 +13252,6 @@
 F:	Documentation/input/devices/pxrc.rst
 F:	drivers/input/joystick/pxrc.c
 
-FLYSKY FSIA6B RC RECEIVER
-M:	Markus Koch <markus@notsyncing.net>
-L:	linux-input@vger.kernel.org
-S:	Maintained
-F:	drivers/input/joystick/fsia6b.c
-
 PHONET PROTOCOL
 M:	Remi Denis-Courmont <courmisch@gmail.com>
 S:	Supported
@@ -13246,8 +13276,8 @@
 PICOXCELL SUPPORT
 M:	Jamie Iles <jamie@jamieiles.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-T:	git git://github.com/jamieiles/linux-2.6-ji.git
 S:	Supported
+T:	git git://github.com/jamieiles/linux-2.6-ji.git
 F:	arch/arm/boot/dts/picoxcell*
 F:	arch/arm/mach-picoxcell/
 F:	drivers/crypto/picoxcell*
@@ -13258,8 +13288,9 @@
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux.git
 F:	samples/pidfd/
-F:	tools/testing/selftests/pidfd/
 F:	tools/testing/selftests/clone3/
+F:	tools/testing/selftests/pid_namespace/
+F:	tools/testing/selftests/pidfd/
 K:	(?i)pidfd
 K:	(?i)clone3
 K:	\b(clone_args|kernel_clone_args)\b
@@ -13267,21 +13298,13 @@
 PIN CONTROL SUBSYSTEM
 M:	Linus Walleij <linus.walleij@linaro.org>
 L:	linux-gpio@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git
 F:	Documentation/devicetree/bindings/pinctrl/
 F:	Documentation/driver-api/pinctl.rst
 F:	drivers/pinctrl/
 F:	include/linux/pinctrl/
 
-PIN CONTROLLER - MICROCHIP AT91
-M:	Ludovic Desroches <ludovic.desroches@microchip.com>
-L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-L:	linux-gpio@vger.kernel.org
-S:	Supported
-F:	drivers/pinctrl/pinctrl-at91*
-F:	drivers/gpio/gpio-sama5d2-piobu.c
-
 PIN CONTROLLER - FREESCALE
 M:	Dong Aisheng <aisheng.dong@nxp.com>
 M:	Fabio Estevam <festevam@gmail.com>
@@ -13290,14 +13313,14 @@
 R:	Pengutronix Kernel Team <kernel@pengutronix.de>
 L:	linux-gpio@vger.kernel.org
 S:	Maintained
-F:	drivers/pinctrl/freescale/
 F:	Documentation/devicetree/bindings/pinctrl/fsl,*
+F:	drivers/pinctrl/freescale/
 
 PIN CONTROLLER - INTEL
 M:	Mika Westerberg <mika.westerberg@linux.intel.com>
 M:	Andy Shevchenko <andy@kernel.org>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel.git
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel.git
 F:	drivers/pinctrl/intel/
 
 PIN CONTROLLER - MEDIATEK
@@ -13308,18 +13331,26 @@
 F:	Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt
 F:	drivers/pinctrl/mediatek/
 
+PIN CONTROLLER - MICROCHIP AT91
+M:	Ludovic Desroches <ludovic.desroches@microchip.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L:	linux-gpio@vger.kernel.org
+S:	Supported
+F:	drivers/gpio/gpio-sama5d2-piobu.c
+F:	drivers/pinctrl/pinctrl-at91*
+
 PIN CONTROLLER - QUALCOMM
 M:	Bjorn Andersson <bjorn.andersson@linaro.org>
-S:	Maintained
 L:	linux-arm-msm@vger.kernel.org
+S:	Maintained
 F:	Documentation/devicetree/bindings/pinctrl/qcom,*.txt
 F:	drivers/pinctrl/qcom/
 
 PIN CONTROLLER - RENESAS
 M:	Geert Uytterhoeven <geert+renesas@glider.be>
 L:	linux-renesas-soc@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git sh-pfc
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git sh-pfc
 F:	drivers/pinctrl/pinctrl-rz*
 F:	drivers/pinctrl/sh-pfc/
 
@@ -13329,12 +13360,12 @@
 M:	Sylwester Nawrocki <s.nawrocki@samsung.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
+S:	Maintained
 Q:	https://patchwork.kernel.org/project/linux-samsung-soc/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung.git
-S:	Maintained
+F:	Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
 F:	drivers/pinctrl/samsung/
 F:	include/dt-bindings/pinctrl/samsung.h
-F:	Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
 
 PIN CONTROLLER - SINGLE
 M:	Tony Lindgren <tony@atomide.com>
@@ -13347,57 +13378,66 @@
 PIN CONTROLLER - ST SPEAR
 M:	Viresh Kumar <vireshk@kernel.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W:	http://www.st.com/spear
 S:	Maintained
+W:	http://www.st.com/spear
 F:	drivers/pinctrl/spear/
 
 PISTACHIO SOC SUPPORT
 M:	James Hartley <james.hartley@sondrel.com>
 L:	linux-mips@vger.kernel.org
 S:	Odd Fixes
-F:	arch/mips/pistachio/
-F:	arch/mips/include/asm/mach-pistachio/
 F:	arch/mips/boot/dts/img/pistachio*
 F:	arch/mips/configs/pistachio*_defconfig
+F:	arch/mips/include/asm/mach-pistachio/
+F:	arch/mips/pistachio/
 
 PKTCDVD DRIVER
-S:	Orphan
 M:	linux-block@vger.kernel.org
+S:	Orphan
 F:	drivers/block/pktcdvd.c
 F:	include/linux/pktcdvd.h
 F:	include/uapi/linux/pktcdvd.h
 
 PKUNITY SOC DRIVERS
 M:	Guan Xuetao <gxt@pku.edu.cn>
-W:	http://mprc.pku.edu.cn/~guanxuetao/linux
 S:	Maintained
+W:	http://mprc.pku.edu.cn/~guanxuetao/linux
 T:	git git://github.com/gxt/linux.git
-F:	drivers/input/serio/i8042-unicore32io.h
 F:	drivers/i2c/busses/i2c-puv3.c
-F:	drivers/video/fbdev/fb-puv3.c
+F:	drivers/input/serio/i8042-unicore32io.h
 F:	drivers/rtc/rtc-puv3.c
+F:	drivers/video/fbdev/fb-puv3.c
 
 PLANTOWER PMS7003 AIR POLLUTION SENSOR DRIVER
 M:	Tomasz Duszynski <tduszyns@gmail.com>
 S:	Maintained
-F:	drivers/iio/chemical/pms7003.c
 F:	Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml
+F:	drivers/iio/chemical/pms7003.c
 
 PLX DMA DRIVER
 M:	Logan Gunthorpe <logang@deltatee.com>
 S:	Maintained
 F:	drivers/dma/plx_dma.c
 
+PM-GRAPH UTILITY
+M:	"Todd E Brandt" <todd.e.brandt@linux.intel.com>
+L:	linux-pm@vger.kernel.org
+S:	Supported
+W:	https://01.org/pm-graph
+B:	https://bugzilla.kernel.org/buglist.cgi?component=pm-graph&product=Tools
+T:	git git://github.com/intel/pm-graph
+F:	tools/power/pm-graph
+
 PMBUS HARDWARE MONITORING DRIVERS
 M:	Guenter Roeck <linux@roeck-us.net>
 L:	linux-hwmon@vger.kernel.org
+S:	Maintained
 W:	http://hwmon.wiki.kernel.org/
 W:	http://www.roeck-us.net/linux/drivers/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git
-S:	Maintained
 F:	Documentation/devicetree/bindings/hwmon/ibm,cffps1.txt
-F:	Documentation/devicetree/bindings/hwmon/max31785.txt
 F:	Documentation/devicetree/bindings/hwmon/ltc2978.txt
+F:	Documentation/devicetree/bindings/hwmon/max31785.txt
 F:	Documentation/hwmon/adm1275.rst
 F:	Documentation/hwmon/ibm-cffps.rst
 F:	Documentation/hwmon/ir35221.rst
@@ -13409,8 +13449,8 @@
 F:	Documentation/hwmon/max31785.rst
 F:	Documentation/hwmon/max34440.rst
 F:	Documentation/hwmon/max8688.rst
-F:	Documentation/hwmon/pmbus.rst
 F:	Documentation/hwmon/pmbus-core.rst
+F:	Documentation/hwmon/pmbus.rst
 F:	Documentation/hwmon/tps40422.rst
 F:	Documentation/hwmon/ucd9000.rst
 F:	Documentation/hwmon/ucd9200.rst
@@ -13420,8 +13460,8 @@
 
 PMC SIERRA MaxRAID DRIVER
 L:	linux-scsi@vger.kernel.org
-W:	http://www.pmc-sierra.com/
 S:	Orphan
+W:	http://www.pmc-sierra.com/
 F:	drivers/scsi/pmcraid.*
 
 PMC SIERRA PM8001 DRIVER
@@ -13430,52 +13470,43 @@
 S:	Supported
 F:	drivers/scsi/pm8001/
 
-PM-GRAPH UTILITY
-M:	"Todd E Brandt" <todd.e.brandt@linux.intel.com>
-L:	linux-pm@vger.kernel.org
-W:	https://01.org/pm-graph
-B:	https://bugzilla.kernel.org/buglist.cgi?component=pm-graph&product=Tools
-T:	git git://github.com/intel/pm-graph
-S:	Supported
-F:	tools/power/pm-graph
-
 PNI RM3100 IIO DRIVER
 M:	Song Qiang <songqiang1304521@gmail.com>
 L:	linux-iio@vger.kernel.org
 S:	Maintained
-F:	drivers/iio/magnetometer/rm3100*
 F:	Documentation/devicetree/bindings/iio/magnetometer/pni,rm3100.txt
+F:	drivers/iio/magnetometer/rm3100*
 
 PNP SUPPORT
 M:	"Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
 L:	linux-acpi@vger.kernel.org
 S:	Maintained
-F:	include/linux/pnp.h
 F:	drivers/pnp/
+F:	include/linux/pnp.h
 
 POSIX CLOCKS and TIMERS
 M:	Thomas Gleixner <tglx@linutronix.de>
 L:	linux-kernel@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core
 F:	fs/timerfd.c
-F:	include/linux/timer*
 F:	include/linux/time_namespace.h
-F:	kernel/time/namespace.c
+F:	include/linux/timer*
 F:	kernel/time/*timer*
+F:	kernel/time/namespace.c
 
 POWER MANAGEMENT CORE
 M:	"Rafael J. Wysocki" <rjw@rjwysocki.net>
 L:	linux-pm@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
-B:	https://bugzilla.kernel.org
 S:	Supported
+B:	https://bugzilla.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
 F:	drivers/base/power/
+F:	drivers/powercap/
+F:	include/linux/intel_rapl.h
 F:	include/linux/pm.h
 F:	include/linux/pm_*
 F:	include/linux/powercap.h
-F:	include/linux/intel_rapl.h
-F:	drivers/powercap/
 F:	kernel/configs/nopm.config
 
 POWER STATE COORDINATION INTERFACE (PSCI)
@@ -13490,12 +13521,12 @@
 POWER SUPPLY CLASS/SUBSYSTEM and DRIVERS
 M:	Sebastian Reichel <sre@kernel.org>
 L:	linux-pm@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply.git
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply.git
 F:	Documentation/ABI/testing/sysfs-class-power
 F:	Documentation/devicetree/bindings/power/supply/
-F:	include/linux/power_supply.h
 F:	drivers/power/supply/
+F:	include/linux/power_supply.h
 
 POWERNV OPERATOR PANEL LCD DISPLAY DRIVER
 M:	Suraj Jitindar Singh <sjitindarsingh@gmail.com>
@@ -13506,8 +13537,8 @@
 PPP OVER ATM (RFC 2364)
 M:	Mitchell Blank Jr <mitch@sfgoth.com>
 S:	Maintained
-F:	net/atm/pppoatm.c
 F:	include/uapi/linux/atmppp.h
+F:	net/atm/pppoatm.c
 
 PPP OVER ETHERNET
 M:	Michal Ostrowski <mostrows@earthlink.net>
@@ -13518,9 +13549,9 @@
 PPP OVER L2TP
 M:	James Chapman <jchapman@katalix.com>
 S:	Maintained
-F:	net/l2tp/l2tp_ppp.c
 F:	include/linux/if_pppol2tp.h
 F:	include/uapi/linux/if_pppol2tp.h
+F:	net/l2tp/l2tp_ppp.c
 
 PPP PROTOCOL DRIVERS AND COMPRESSORS
 M:	Paul Mackerras <paulus@samba.org>
@@ -13530,12 +13561,12 @@
 
 PPS SUPPORT
 M:	Rodolfo Giometti <giometti@enneenne.com>
-W:	http://wiki.enneenne.com/index.php/LinuxPPS_support
 L:	linuxpps@ml.enneenne.com (subscribers-only)
 S:	Maintained
-F:	Documentation/driver-api/pps.rst
-F:	Documentation/devicetree/bindings/pps/pps-gpio.txt
+W:	http://wiki.enneenne.com/index.php/LinuxPPS_support
 F:	Documentation/ABI/testing/sysfs-pps
+F:	Documentation/devicetree/bindings/pps/pps-gpio.txt
+F:	Documentation/driver-api/pps.rst
 F:	drivers/pps/
 F:	include/linux/pps*.h
 F:	include/uapi/linux/pps.h
@@ -13544,22 +13575,28 @@
 M:	Dmitry Kozlov <xeb@mail.ru>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/ppp/pptp.c
 W:	http://sourceforge.net/projects/accel-pptp
+F:	drivers/net/ppp/pptp.c
+
+PRESSURE STALL INFORMATION (PSI)
+M:	Johannes Weiner <hannes@cmpxchg.org>
+S:	Maintained
+F:	include/linux/psi*
+F:	kernel/sched/psi.c
 
 PRINTK
 M:	Petr Mladek <pmladek@suse.com>
 M:	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
 R:	Steven Rostedt <rostedt@goodmis.org>
 S:	Maintained
-F:	kernel/printk/
 F:	include/linux/printk.h
+F:	kernel/printk/
 
 PRISM54 WIRELESS DRIVER
 M:	Luis Chamberlain <mcgrof@kernel.org>
 L:	linux-wireless@vger.kernel.org
-W:	http://wireless.kernel.org/en/users/Drivers/p54
 S:	Obsolete
+W:	http://wireless.kernel.org/en/users/Drivers/p54
 F:	drivers/net/wireless/intersil/prism54/
 
 PROC FILESYSTEM
@@ -13567,10 +13604,10 @@
 L:	linux-kernel@vger.kernel.org
 L:	linux-fsdevel@vger.kernel.org
 S:	Maintained
+F:	Documentation/filesystems/proc.rst
 F:	fs/proc/
 F:	include/linux/proc_fs.h
 F:	tools/testing/selftests/proc/
-F:	Documentation/filesystems/proc.rst
 
 PROC SYSCTL
 M:	Luis Chamberlain <mcgrof@kernel.org>
@@ -13581,8 +13618,8 @@
 S:	Maintained
 F:	fs/proc/proc_sysctl.c
 F:	include/linux/sysctl.h
-F:	kernel/sysctl.c
 F:	kernel/sysctl-test.c
+F:	kernel/sysctl.c
 F:	tools/testing/selftests/sysctl/
 
 PS3 NETWORK SUPPORT
@@ -13616,15 +13653,9 @@
 PSAMPLE PACKET SAMPLING SUPPORT
 M:	Yotam Gigi <yotam.gi@gmail.com>
 S:	Maintained
-F:	net/psample
 F:	include/net/psample.h
 F:	include/uapi/linux/psample.h
-
-PRESSURE STALL INFORMATION (PSI)
-M:	Johannes Weiner <hannes@cmpxchg.org>
-S:	Maintained
-F:	kernel/sched/psi.c
-F:	include/linux/psi*
+F:	net/psample
 
 PSTORE FILESYSTEM
 M:	Kees Cook <keescook@chromium.org>
@@ -13633,12 +13664,12 @@
 M:	Tony Luck <tony.luck@intel.com>
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git for-next/pstore
-F:	fs/pstore/
-F:	include/linux/pstore*
-F:	drivers/firmware/efi/efi-pstore.c
-F:	drivers/acpi/apei/erst.c
 F:	Documentation/admin-guide/ramoops.rst
 F:	Documentation/devicetree/bindings/reserved-memory/ramoops.txt
+F:	drivers/acpi/apei/erst.c
+F:	drivers/firmware/efi/efi-pstore.c
+F:	fs/pstore/
+F:	include/linux/pstore*
 K:	\b(pstore|ramoops)
 
 PTP HARDWARE CLOCK SUPPORT
@@ -13655,6 +13686,9 @@
 PTRACE SUPPORT
 M:	Oleg Nesterov <oleg@redhat.com>
 S:	Maintained
+F:	arch/*/*/ptrace*.c
+F:	arch/*/include/asm/ptrace*.h
+F:	arch/*/ptrace*.c
 F:	include/asm-generic/syscall.h
 F:	include/linux/ptrace.h
 F:	include/linux/regset.h
@@ -13662,33 +13696,30 @@
 F:	include/uapi/linux/ptrace.h
 F:	include/uapi/linux/ptrace.h
 F:	kernel/ptrace.c
-F:	arch/*/ptrace*.c
-F:	arch/*/*/ptrace*.c
-F:	arch/*/include/asm/ptrace*.h
 
 PULSE8-CEC DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
-F:	drivers/media/usb/pulse8-cec/*
+T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/media/cec-drivers/pulse8-cec.rst
+F:	drivers/media/usb/pulse8-cec/*
 
 PVRUSB2 VIDEO4LINUX DRIVER
 M:	Mike Isely <isely@pobox.com>
 L:	pvrusb2@isely.net	(subscribers-only)
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	http://www.isely.net/pvrusb2/
 T:	git git://linuxtv.org/media_tree.git
-S:	Maintained
 F:	Documentation/media/v4l-drivers/pvrusb2*
 F:	drivers/media/usb/pvrusb2/
 
 PWC WEBCAM DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Odd Fixes
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/usb/pwc/*
 F:	include/trace/events/pwc.h
 
@@ -13712,16 +13743,16 @@
 R:	Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
 L:	linux-pwm@vger.kernel.org
 S:	Maintained
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm.git
 Q:	https://patchwork.ozlabs.org/project/linux-pwm/list/
-F:	Documentation/driver-api/pwm.rst
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm.git
+F:	Documentation/devicetree/bindings/gpio/gpio-mvebu.txt
 F:	Documentation/devicetree/bindings/pwm/
-F:	include/linux/pwm.h
+F:	Documentation/driver-api/pwm.rst
+F:	drivers/gpio/gpio-mvebu.c
 F:	drivers/pwm/
 F:	drivers/video/backlight/pwm_bl.c
+F:	include/linux/pwm.h
 F:	include/linux/pwm_backlight.h
-F:	drivers/gpio/gpio-mvebu.c
-F:	Documentation/devicetree/bindings/gpio/gpio-mvebu.txt
 K:	pwm_(config|apply_state|ops)
 
 PXA GPIO DRIVER
@@ -13743,9 +13774,9 @@
 M:	Haojian Zhuang <haojian.zhuang@gmail.com>
 M:	Robert Jarzmik <robert.jarzmik@free.fr>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
 T:	git git://github.com/hzhuang1/linux.git
 T:	git git://github.com/rjarzmik/linux.git
-S:	Maintained
 F:	arch/arm/boot/dts/pxa*
 F:	arch/arm/mach-pxa/
 F:	drivers/dma/pxa*
@@ -13809,8 +13840,8 @@
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/qlogic/qed/
-F:	include/linux/qed/
 F:	drivers/net/ethernet/qlogic/qede/
+F:	include/linux/qed/
 
 QLOGIC QL4xxx RDMA DRIVER
 M:	Michal Kalderon <mkalderon@marvell.com>
@@ -13827,7 +13858,8 @@
 F:	drivers/scsi/qla1280.[ch]
 
 QLOGIC QLA2XXX FC-SCSI DRIVER
-M:	hmadhani@marvell.com
+M:	Nilesh Javali <njavali@marvell.com>
+M:	GR-QLogic-Storage-Upstream@marvell.com
 L:	linux-scsi@vger.kernel.org
 S:	Supported
 F:	Documentation/scsi/LICENSE.qla2xxx
@@ -13876,8 +13908,8 @@
 
 QNX4 FILESYSTEM
 M:	Anders Larsen <al@alarsen.net>
-W:	http://www.alarsen.net/linux/qnx4fs/
 S:	Maintained
+W:	http://www.alarsen.net/linux/qnx4fs/
 F:	fs/qnx4/
 F:	include/uapi/linux/qnx4_fs.h
 F:	include/uapi/linux/qnxtypes.h
@@ -13887,40 +13919,40 @@
 M:	Laurentiu Tudor <laurentiu.tudor@nxp.com>
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
-F:	drivers/bus/fsl-mc/
 F:	Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt
 F:	Documentation/networking/device_drivers/freescale/dpaa2/overview.rst
+F:	drivers/bus/fsl-mc/
 
 QT1010 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
-S:	Maintained
 F:	drivers/media/tuners/qt1010*
 
 QUALCOMM ATHEROS ATH10K WIRELESS DRIVER
 M:	Kalle Valo <kvalo@codeaurora.org>
 L:	ath10k@lists.infradead.org
+S:	Supported
 W:	http://wireless.kernel.org/en/users/Drivers/ath10k
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
-S:	Supported
 F:	drivers/net/wireless/ath/ath10k/
 
 QUALCOMM ATHEROS ATH11K WIRELESS DRIVER
 M:	Kalle Valo <kvalo@codeaurora.org>
 L:	ath11k@lists.infradead.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
 S:	Supported
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
 F:	drivers/net/wireless/ath/ath11k/
 
 QUALCOMM ATHEROS ATH9K WIRELESS DRIVER
 M:	QCA ath9k Development <ath9k-devel@qca.qualcomm.com>
 L:	linux-wireless@vger.kernel.org
-W:	http://wireless.kernel.org/en/users/Drivers/ath9k
 S:	Supported
+W:	http://wireless.kernel.org/en/users/Drivers/ath9k
 F:	drivers/net/wireless/ath/ath9k/
 
 QUALCOMM CAMERA SUBSYSTEM DRIVER
@@ -13931,13 +13963,6 @@
 F:	Documentation/media/v4l-drivers/qcom_camss.rst
 F:	drivers/media/platform/qcom/camss/
 
-QUALCOMM CPUFREQ DRIVER MSM8996/APQ8096
-M:	Ilia Lin <ilia.lin@kernel.org>
-L:	linux-pm@vger.kernel.org
-S:	Maintained
-F:	Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt
-F:	drivers/cpufreq/qcom-cpufreq-nvmem.c
-
 QUALCOMM CORE POWER REDUCTION (CPR) AVS DRIVER
 M:	Niklas Cassel <nks@flawful.org>
 L:	linux-pm@vger.kernel.org
@@ -13946,6 +13971,13 @@
 F:	Documentation/devicetree/bindings/power/avs/qcom,cpr.txt
 F:	drivers/power/avs/qcom-cpr.c
 
+QUALCOMM CPUFREQ DRIVER MSM8996/APQ8096
+M:	Ilia Lin <ilia.lin@kernel.org>
+L:	linux-pm@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt
+F:	drivers/cpufreq/qcom-cpufreq-nvmem.c
+
 QUALCOMM EMAC GIGABIT ETHERNET DRIVER
 M:	Timur Tabi <timur@kernel.org>
 L:	netdev@vger.kernel.org
@@ -13956,8 +13988,8 @@
 M:	Vinod Koul <vkoul@kernel.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
 F:	Documentation/devicetree/bindings/net/qcom,ethqos.txt
+F:	drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
 
 QUALCOMM GENERIC INTERFACE I2C DRIVER
 M:	Alok Chauhan <alokc@codeaurora.org>
@@ -13992,8 +14024,8 @@
 M:	Sean Tranchetti <stranche@codeaurora.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/ethernet/qualcomm/rmnet/
 F:	Documentation/networking/device_drivers/qualcomm/rmnet.txt
+F:	drivers/net/ethernet/qualcomm/rmnet/
 F:	include/linux/if_rmnet.h
 
 QUALCOMM TSENS THERMAL DRIVER
@@ -14001,24 +14033,24 @@
 L:	linux-pm@vger.kernel.org
 L:	linux-arm-msm@vger.kernel.org
 S:	Maintained
-F:	drivers/thermal/qcom/
 F:	Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+F:	drivers/thermal/qcom/
 
 QUALCOMM VENUS VIDEO ACCELERATOR DRIVER
 M:	Stanimir Varbanov <stanimir.varbanov@linaro.org>
 L:	linux-media@vger.kernel.org
 L:	linux-arm-msm@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
-F:	drivers/media/platform/qcom/venus/
+T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/devicetree/bindings/media/*venus*
+F:	drivers/media/platform/qcom/venus/
 
 QUALCOMM WCN36XX WIRELESS DRIVER
 M:	Kalle Valo <kvalo@codeaurora.org>
 L:	wcn36xx@lists.infradead.org
+S:	Supported
 W:	http://wireless.kernel.org/en/users/Drivers/wcn36xx
 T:	git git://github.com/KrasnikovEugene/wcn36xx.git
-S:	Supported
 F:	drivers/net/wireless/ath/wcn36xx/
 
 QUANTENNA QTNFMAC WIRELESS DRIVER
@@ -14034,12 +14066,12 @@
 M:	Christian König <christian.koenig@amd.com>
 M:	David (ChunMing) Zhou <David1.Zhou@amd.com>
 L:	amd-gfx@lists.freedesktop.org
-T:	git git://people.freedesktop.org/~agd5f/linux
 S:	Supported
-F:	drivers/gpu/drm/radeon/
-F:	include/uapi/drm/radeon_drm.h
+T:	git git://people.freedesktop.org/~agd5f/linux
 F:	drivers/gpu/drm/amd/
+F:	drivers/gpu/drm/radeon/
 F:	include/uapi/drm/amdgpu_drm.h
+F:	include/uapi/drm/radeon_drm.h
 
 RADEON FRAMEBUFFER DISPLAY DRIVER
 M:	Benjamin Herrenschmidt <benh@kernel.crashing.org>
@@ -14051,15 +14083,15 @@
 RADIOSHARK RADIO DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/radio/radio-shark.c
 
 RADIOSHARK2 RADIO DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/radio/radio-shark2.c
 F:	drivers/media/radio/radio-tea5777.c
 
@@ -14068,10 +14100,10 @@
 M:	Sage Weil <sage@redhat.com>
 R:	Dongsheng Yang <dongsheng.yang@easystack.cn>
 L:	ceph-devel@vger.kernel.org
+S:	Supported
 W:	http://ceph.com/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client.git
 T:	git git://github.com/ceph/ceph-client.git
-S:	Supported
 F:	Documentation/ABI/testing/sysfs-bus-rbd
 F:	drivers/block/rbd.c
 F:	drivers/block/rbd_types.h
@@ -14085,8 +14117,8 @@
 RAINSHADOW-CEC DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/usb/rainshadow-cec/*
 
 RALINK MIPS ARCHITECTURE
@@ -14112,8 +14144,8 @@
 M:	Miodrag Dinic <miodrag.dinic@mips.com>
 L:	linux-mips@vger.kernel.org
 S:	Supported
-F:	arch/mips/generic/board-ranchu.c
 F:	arch/mips/configs/generic/board-ranchu.config
+F:	arch/mips/generic/board-ranchu.c
 
 RANDOM NUMBER DRIVER
 M:	"Theodore Ts'o" <tytso@mit.edu>
@@ -14131,16 +14163,21 @@
 M:	Borislav Petkov <bp@alien8.de>
 L:	linux-edac@vger.kernel.org
 S:	Maintained
+F:	Documentation/admin-guide/ras.rst
 F:	drivers/ras/
 F:	include/linux/ras.h
 F:	include/ras/ras_event.h
-F:	Documentation/admin-guide/ras.rst
 
 RAYLINK/WEBGEAR 802.11 WIRELESS LAN DRIVER
 L:	linux-wireless@vger.kernel.org
 S:	Orphan
 F:	drivers/net/wireless/ray*
 
+RCMM REMOTE CONTROLS DECODER
+M:	Patrick Lerda <patrick9876@free.fr>
+S:	Maintained
+F:	drivers/media/rc/ir-rcmm-decoder.c
+
 RCUTORTURE TEST FRAMEWORK
 M:	"Paul E. McKenney" <paulmck@kernel.org>
 M:	Josh Triplett <josh@joshtriplett.org>
@@ -14174,19 +14211,19 @@
 L:	netdev@vger.kernel.org
 L:	linux-rdma@vger.kernel.org
 L:	rds-devel@oss.oracle.com (moderated for non-subscribers)
-W:	https://oss.oracle.com/projects/rds/
 S:	Supported
-F:	net/rds/
+W:	https://oss.oracle.com/projects/rds/
 F:	Documentation/networking/rds.txt
+F:	net/rds/
 
 RDT - RESOURCE ALLOCATION
 M:	Fenghua Yu <fenghua.yu@intel.com>
 M:	Reinette Chatre <reinette.chatre@intel.com>
 L:	linux-kernel@vger.kernel.org
 S:	Supported
-F:	arch/x86/kernel/cpu/resctrl/
-F:	arch/x86/include/asm/resctrl_sched.h
 F:	Documentation/x86/resctrl*
+F:	arch/x86/include/asm/resctrl_sched.h
+F:	arch/x86/kernel/cpu/resctrl/
 F:	tools/testing/selftests/resctrl/
 
 READ-COPY UPDATE (RCU)
@@ -14197,37 +14234,37 @@
 R:	Lai Jiangshan <jiangshanlai@gmail.com>
 R:	Joel Fernandes <joel@joelfernandes.org>
 L:	rcu@vger.kernel.org
-W:	http://www.rdrop.com/users/paulmck/RCU/
 S:	Supported
+W:	http://www.rdrop.com/users/paulmck/RCU/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git dev
 F:	Documentation/RCU/
-X:	Documentation/RCU/torture.txt
 F:	include/linux/rcu*
-X:	include/linux/srcu*.h
 F:	kernel/rcu/
+X:	Documentation/RCU/torture.txt
+X:	include/linux/srcu*.h
 X:	kernel/rcu/srcu*.c
 
 REAL TIME CLOCK (RTC) SUBSYSTEM
 M:	Alessandro Zummo <a.zummo@towertech.it>
 M:	Alexandre Belloni <alexandre.belloni@bootlin.com>
 L:	linux-rtc@vger.kernel.org
+S:	Maintained
 Q:	http://patchwork.ozlabs.org/project/rtc-linux/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux.git
-S:	Maintained
-F:	Documentation/devicetree/bindings/rtc/
 F:	Documentation/admin-guide/rtc.rst
+F:	Documentation/devicetree/bindings/rtc/
 F:	drivers/rtc/
-F:	include/linux/rtc.h
-F:	include/uapi/linux/rtc.h
-F:	include/linux/rtc/
 F:	include/linux/platform_data/rtc-*
+F:	include/linux/rtc.h
+F:	include/linux/rtc/
+F:	include/uapi/linux/rtc.h
 F:	tools/testing/selftests/rtc/
 
 REALTEK AUDIO CODECS
 M:	Oder Chiou <oder_chiou@realtek.com>
 S:	Maintained
-F:	sound/soc/codecs/rt*
 F:	include/sound/rt*.h
+F:	sound/soc/codecs/rt*
 
 REALTEK RTL83xx SMI DSA ROUTER CHIPS
 M:	Linus Walleij <linus.walleij@linaro.org>
@@ -14236,6 +14273,20 @@
 F:	drivers/net/dsa/realtek-smi*
 F:	drivers/net/dsa/rtl83*
 
+REALTEK WIRELESS DRIVER (rtlwifi family)
+M:	Ping-Ke Shih <pkshih@realtek.com>
+L:	linux-wireless@vger.kernel.org
+S:	Maintained
+W:	http://wireless.kernel.org/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
+F:	drivers/net/wireless/realtek/rtlwifi/
+
+REALTEK WIRELESS DRIVER (rtw88)
+M:	Yan-Hsuan Chuang <yhchuang@realtek.com>
+L:	linux-wireless@vger.kernel.org
+S:	Maintained
+F:	drivers/net/wireless/realtek/rtw88/
+
 REDPINE WIRELESS DRIVER
 M:	Amitkumar Karwar <amitkarwar@gmail.com>
 M:	Siva Rebbagondla <siva8118@gmail.com>
@@ -14246,8 +14297,8 @@
 REGISTER MAP ABSTRACTION
 M:	Mark Brown <broonie@kernel.org>
 L:	linux-kernel@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap.git
 S:	Supported
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap.git
 F:	Documentation/devicetree/bindings/regmap/
 F:	drivers/base/regmap/
 F:	include/linux/regmap.h
@@ -14261,10 +14312,10 @@
 M:	Ohad Ben-Cohen <ohad@wizery.com>
 M:	Bjorn Andersson <bjorn.andersson@linaro.org>
 L:	linux-remoteproc@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc.git rproc-next
 S:	Maintained
-F:	Documentation/devicetree/bindings/remoteproc/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc.git rproc-next
 F:	Documentation/ABI/testing/sysfs-class-remoteproc
+F:	Documentation/devicetree/bindings/remoteproc/
 F:	Documentation/remoteproc.txt
 F:	drivers/remoteproc/
 F:	include/linux/remoteproc.h
@@ -14274,11 +14325,11 @@
 M:	Ohad Ben-Cohen <ohad@wizery.com>
 M:	Bjorn Andersson <bjorn.andersson@linaro.org>
 L:	linux-remoteproc@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc.git rpmsg-next
 S:	Maintained
-F:	drivers/rpmsg/
-F:	Documentation/rpmsg.txt
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc.git rpmsg-next
 F:	Documentation/ABI/testing/sysfs-bus-rpmsg
+F:	Documentation/rpmsg.txt
+F:	drivers/rpmsg/
 F:	include/linux/rpmsg.h
 F:	include/linux/rpmsg/
 F:	include/uapi/linux/rpmsg.h
@@ -14287,8 +14338,8 @@
 RENESAS CLOCK DRIVERS
 M:	Geert Uytterhoeven <geert+renesas@glider.be>
 L:	linux-renesas-soc@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git clk-renesas
 S:	Supported
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git clk-renesas
 F:	drivers/clk/renesas/
 
 RENESAS EMEV2 I2C DRIVER
@@ -14335,14 +14386,14 @@
 
 RESET CONTROLLER FRAMEWORK
 M:	Philipp Zabel <p.zabel@pengutronix.de>
-T:	git git://git.pengutronix.de/git/pza/linux
 S:	Maintained
-F:	drivers/reset/
+T:	git git://git.pengutronix.de/git/pza/linux
 F:	Documentation/devicetree/bindings/reset/
+F:	drivers/reset/
 F:	include/dt-bindings/reset/
+F:	include/linux/reset-controller.h
 F:	include/linux/reset.h
 F:	include/linux/reset/
-F:	include/linux/reset-controller.h
 K:	\b(?:devm_|of_)?reset_control(?:ler_[a-z]+|_[a-z_]+)?\b
 
 RESTARTABLE SEQUENCES SUPPORT
@@ -14352,33 +14403,33 @@
 M:	Boqun Feng <boqun.feng@gmail.com>
 L:	linux-kernel@vger.kernel.org
 S:	Supported
-F:	kernel/rseq.c
-F:	include/uapi/linux/rseq.h
 F:	include/trace/events/rseq.h
+F:	include/uapi/linux/rseq.h
+F:	kernel/rseq.c
 F:	tools/testing/selftests/rseq/
 
 RFKILL
 M:	Johannes Berg <johannes@sipsolutions.net>
 L:	linux-wireless@vger.kernel.org
+S:	Maintained
 W:	http://wireless.kernel.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
-S:	Maintained
-F:	Documentation/driver-api/rfkill.rst
 F:	Documentation/ABI/stable/sysfs-class-rfkill
-F:	net/rfkill/
+F:	Documentation/driver-api/rfkill.rst
 F:	include/linux/rfkill.h
 F:	include/uapi/linux/rfkill.h
+F:	net/rfkill/
 
 RHASHTABLE
 M:	Thomas Graf <tgraf@suug.ch>
 M:	Herbert Xu <herbert@gondor.apana.org.au>
 L:	netdev@vger.kernel.org
 S:	Maintained
+F:	include/linux/rhashtable-types.h
+F:	include/linux/rhashtable.h
 F:	lib/rhashtable.c
 F:	lib/test_rhashtable.c
-F:	include/linux/rhashtable.h
-F:	include/linux/rhashtable-types.h
 
 RICOH R5C592 MEMORYSTICK DRIVER
 M:	Maxim Levitsky <maximlevitsky@gmail.com>
@@ -14396,20 +14447,20 @@
 M:	Palmer Dabbelt <palmer@dabbelt.com>
 M:	Albert Ou <aou@eecs.berkeley.edu>
 L:	linux-riscv@lists.infradead.org
+S:	Supported
 P:	Documentation/riscv/patch-acceptance.rst
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux.git
-S:	Supported
 F:	arch/riscv/
-K:	riscv
 N:	riscv
+K:	riscv
 
 ROCCAT DRIVERS
 M:	Stefan Achatz <erazor_de@users.sourceforge.net>
-W:	http://sourceforge.net/projects/roccat/
 S:	Maintained
+W:	http://sourceforge.net/projects/roccat/
+F:	Documentation/ABI/*/sysfs-driver-hid-roccat*
 F:	drivers/hid/hid-roccat*
 F:	include/linux/hid-roccat*
-F:	Documentation/ABI/*/sysfs-driver-hid-roccat*
 
 ROCKCHIP ISP V1 DRIVER
 M:	Helen Koike <helen.koike@collabora.com>
@@ -14422,18 +14473,8 @@
 M:	Ezequiel Garcia <ezequiel@collabora.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-F:	drivers/media/platform/rockchip/rga/
 F:	Documentation/devicetree/bindings/media/rockchip-rga.txt
-
-HANTRO VPU CODEC DRIVER
-M:	Ezequiel Garcia <ezequiel@collabora.com>
-M:	Philipp Zabel <p.zabel@pengutronix.de>
-L:	linux-media@vger.kernel.org
-L:	linux-rockchip@lists.infradead.org
-S:	Maintained
-F:	drivers/staging/media/hantro/
-F:	Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml
-F:	Documentation/devicetree/bindings/media/rockchip-vpu.txt
+F:	drivers/media/platform/rockchip/rga/
 
 ROCKER DRIVER
 M:	Jiri Pirko <jiri@resnulli.us>
@@ -14442,8 +14483,8 @@
 F:	drivers/net/ethernet/rocker/
 
 ROCKETPORT DRIVER
-W:	http://www.comtrol.com
 S:	Maintained
+W:	http://www.comtrol.com
 F:	Documentation/driver-api/serial/rocket.rst
 F:	drivers/tty/rocket*
 
@@ -14456,25 +14497,25 @@
 ROHM BH1750 AMBIENT LIGHT SENSOR DRIVER
 M:	Tomasz Duszynski <tduszyns@gmail.com>
 S:	Maintained
-F:	drivers/iio/light/bh1750.c
 F:	Documentation/devicetree/bindings/iio/light/bh1750.yaml
+F:	drivers/iio/light/bh1750.c
 
 ROHM MULTIFUNCTION BD9571MWV-M PMIC DEVICE DRIVERS
 M:	Marek Vasut <marek.vasut+renesas@gmail.com>
 L:	linux-kernel@vger.kernel.org
 L:	linux-renesas-soc@vger.kernel.org
 S:	Supported
+F:	Documentation/devicetree/bindings/mfd/bd9571mwv.txt
+F:	drivers/gpio/gpio-bd9571mwv.c
 F:	drivers/mfd/bd9571mwv.c
 F:	drivers/regulator/bd9571mwv-regulator.c
-F:	drivers/gpio/gpio-bd9571mwv.c
 F:	include/linux/mfd/bd9571mwv.h
-F:	Documentation/devicetree/bindings/mfd/bd9571mwv.txt
 
 ROSE NETWORK LAYER
 M:	Ralf Baechle <ralf@linux-mips.org>
 L:	linux-hams@vger.kernel.org
-W:	http://www.linux-ax25.org/
 S:	Maintained
+W:	http://www.linux-ax25.org/
 F:	include/net/rose.h
 F:	include/uapi/linux/rose.h
 F:	net/rose/
@@ -14482,46 +14523,46 @@
 ROTATION DRIVER FOR ALLWINNER A83T
 M:	Jernej Skrabec <jernej.skrabec@siol.net>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
-F:	drivers/media/platform/sunxi/sun8i-rotate/
+T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml
+F:	drivers/media/platform/sunxi/sun8i-rotate/
 
 RTL2830 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
-S:	Maintained
 F:	drivers/media/dvb-frontends/rtl2830*
 
 RTL2832 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
-S:	Maintained
 F:	drivers/media/dvb-frontends/rtl2832*
 
 RTL2832_SDR MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
-S:	Maintained
 F:	drivers/media/dvb-frontends/rtl2832_sdr*
 
 RTL8180 WIRELESS DRIVER
 L:	linux-wireless@vger.kernel.org
+S:	Orphan
 W:	http://wireless.kernel.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
-S:	Orphan
 F:	drivers/net/wireless/realtek/rtl818x/rtl8180/
 
 RTL8187 WIRELESS DRIVER
@@ -14529,43 +14570,29 @@
 M:	Hin-Tak Leung <htl10@users.sourceforge.net>
 M:	Larry Finger <Larry.Finger@lwfinger.net>
 L:	linux-wireless@vger.kernel.org
+S:	Maintained
 W:	http://wireless.kernel.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
-S:	Maintained
 F:	drivers/net/wireless/realtek/rtl818x/rtl8187/
 
-REALTEK WIRELESS DRIVER (rtlwifi family)
-M:	Ping-Ke Shih <pkshih@realtek.com>
-L:	linux-wireless@vger.kernel.org
-W:	http://wireless.kernel.org/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
-S:	Maintained
-F:	drivers/net/wireless/realtek/rtlwifi/
-
-REALTEK WIRELESS DRIVER (rtw88)
-M:	Yan-Hsuan Chuang <yhchuang@realtek.com>
-L:	linux-wireless@vger.kernel.org
-S:	Maintained
-F:	drivers/net/wireless/realtek/rtw88/
-
 RTL8XXXU WIRELESS DRIVER (rtl8xxxu)
 M:	Jes Sorensen <Jes.Sorensen@gmail.com>
 L:	linux-wireless@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jes/linux.git rtl8xxxu-devel
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jes/linux.git rtl8xxxu-devel
 F:	drivers/net/wireless/realtek/rtl8xxxu/
 
 RXRPC SOCKETS (AF_RXRPC)
 M:	David Howells <dhowells@redhat.com>
 L:	linux-afs@lists.infradead.org
 S:	Supported
-F:	net/rxrpc/
+W:	https://www.infradead.org/~dhowells/kafs/
+F:	Documentation/networking/rxrpc.txt
 F:	include/keys/rxrpc-type.h
 F:	include/net/af_rxrpc.h
 F:	include/trace/events/rxrpc.h
 F:	include/uapi/linux/rxrpc.h
-F:	Documentation/networking/rxrpc.txt
-W:	https://www.infradead.org/~dhowells/kafs/
+F:	net/rxrpc/
 
 S3 SAVAGE FRAMEBUFFER DRIVER
 M:	Antonino Daplas <adaplas@gmail.com>
@@ -14578,44 +14605,44 @@
 M:	Vasily Gorbik <gor@linux.ibm.com>
 M:	Christian Borntraeger <borntraeger@de.ibm.com>
 L:	linux-s390@vger.kernel.org
+S:	Supported
 W:	http://www.ibm.com/developerworks/linux/linux390/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux.git
-S:	Supported
+F:	Documentation/driver-api/s390-drivers.rst
+F:	Documentation/s390/
 F:	arch/s390/
 F:	drivers/s390/
-F:	Documentation/s390/
-F:	Documentation/driver-api/s390-drivers.rst
 
 S390 COMMON I/O LAYER
-M:	Sebastian Ott <sebott@linux.ibm.com>
+M:	Vineeth Vijayan <vneethv@linux.ibm.com>
 M:	Peter Oberparleiter <oberpar@linux.ibm.com>
 L:	linux-s390@vger.kernel.org
-W:	http://www.ibm.com/developerworks/linux/linux390/
 S:	Supported
+W:	http://www.ibm.com/developerworks/linux/linux390/
 F:	drivers/s390/cio/
 
 S390 DASD DRIVER
 M:	Stefan Haberland <sth@linux.ibm.com>
 M:	Jan Hoeppner <hoeppner@linux.ibm.com>
 L:	linux-s390@vger.kernel.org
-W:	http://www.ibm.com/developerworks/linux/linux390/
 S:	Supported
-F:	drivers/s390/block/dasd*
+W:	http://www.ibm.com/developerworks/linux/linux390/
 F:	block/partitions/ibm.c
+F:	drivers/s390/block/dasd*
 
 S390 IOMMU (PCI)
 M:	Gerald Schaefer <gerald.schaefer@de.ibm.com>
 L:	linux-s390@vger.kernel.org
-W:	http://www.ibm.com/developerworks/linux/linux390/
 S:	Supported
+W:	http://www.ibm.com/developerworks/linux/linux390/
 F:	drivers/iommu/s390-iommu.c
 
 S390 IUCV NETWORK LAYER
 M:	Julian Wiedmann <jwi@linux.ibm.com>
 M:	Ursula Braun <ubraun@linux.ibm.com>
 L:	linux-s390@vger.kernel.org
-W:	http://www.ibm.com/developerworks/linux/linux390/
 S:	Supported
+W:	http://www.ibm.com/developerworks/linux/linux390/
 F:	drivers/s390/net/*iucv*
 F:	include/net/iucv/
 F:	net/iucv/
@@ -14624,19 +14651,31 @@
 M:	Julian Wiedmann <jwi@linux.ibm.com>
 M:	Ursula Braun <ubraun@linux.ibm.com>
 L:	linux-s390@vger.kernel.org
-W:	http://www.ibm.com/developerworks/linux/linux390/
 S:	Supported
+W:	http://www.ibm.com/developerworks/linux/linux390/
 F:	drivers/s390/net/
 
 S390 PCI SUBSYSTEM
-M:	Sebastian Ott <sebott@linux.ibm.com>
+M:	Niklas Schnelle <schnelle@linux.ibm.com>
 M:	Gerald Schaefer <gerald.schaefer@de.ibm.com>
 L:	linux-s390@vger.kernel.org
-W:	http://www.ibm.com/developerworks/linux/linux390/
 S:	Supported
+W:	http://www.ibm.com/developerworks/linux/linux390/
 F:	arch/s390/pci/
 F:	drivers/pci/hotplug/s390_pci_hpc.c
 
+S390 VFIO AP DRIVER
+M:	Tony Krowiak <akrowiak@linux.ibm.com>
+M:	Pierre Morel <pmorel@linux.ibm.com>
+M:	Halil Pasic <pasic@linux.ibm.com>
+L:	linux-s390@vger.kernel.org
+S:	Supported
+W:	http://www.ibm.com/developerworks/linux/linux390/
+F:	Documentation/s390/vfio-ap.rst
+F:	drivers/s390/crypto/vfio_ap_drv.c
+F:	drivers/s390/crypto/vfio_ap_ops.c
+F:	drivers/s390/crypto/vfio_ap_private.h
+
 S390 VFIO-CCW DRIVER
 M:	Cornelia Huck <cohuck@redhat.com>
 M:	Eric Farman <farman@linux.ibm.com>
@@ -14644,35 +14683,23 @@
 L:	linux-s390@vger.kernel.org
 L:	kvm@vger.kernel.org
 S:	Supported
-F:	drivers/s390/cio/vfio_ccw*
 F:	Documentation/s390/vfio-ccw.rst
+F:	drivers/s390/cio/vfio_ccw*
 F:	include/uapi/linux/vfio_ccw.h
 
 S390 ZCRYPT DRIVER
 M:	Harald Freudenberger <freude@linux.ibm.com>
 L:	linux-s390@vger.kernel.org
-W:	http://www.ibm.com/developerworks/linux/linux390/
 S:	Supported
+W:	http://www.ibm.com/developerworks/linux/linux390/
 F:	drivers/s390/crypto/
 
-S390 VFIO AP DRIVER
-M:	Tony Krowiak <akrowiak@linux.ibm.com>
-M:	Pierre Morel <pmorel@linux.ibm.com>
-M:	Halil Pasic <pasic@linux.ibm.com>
-L:	linux-s390@vger.kernel.org
-W:	http://www.ibm.com/developerworks/linux/linux390/
-S:	Supported
-F:	drivers/s390/crypto/vfio_ap_drv.c
-F:	drivers/s390/crypto/vfio_ap_private.h
-F:	drivers/s390/crypto/vfio_ap_ops.c
-F:	Documentation/s390/vfio-ap.rst
-
 S390 ZFCP DRIVER
 M:	Steffen Maier <maier@linux.ibm.com>
 M:	Benjamin Block <bblock@linux.ibm.com>
 L:	linux-s390@vger.kernel.org
-W:	http://www.ibm.com/developerworks/linux/linux390/
 S:	Supported
+W:	http://www.ibm.com/developerworks/linux/linux390/
 F:	drivers/s390/scsi/zfcp_*
 
 S3C24XX SD/MMC Driver
@@ -14684,25 +14711,25 @@
 SAA6588 RDS RECEIVER DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
-W:	https://linuxtv.org
 S:	Odd Fixes
+W:	https://linuxtv.org
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/i2c/saa6588*
 
 SAA7134 VIDEO4LINUX DRIVER
 M:	Mauro Carvalho Chehab <mchehab@kernel.org>
 L:	linux-media@vger.kernel.org
+S:	Odd fixes
 W:	https://linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
-S:	Odd fixes
 F:	Documentation/media/v4l-drivers/saa7134*
 F:	drivers/media/pci/saa7134/
 
 SAA7146 VIDEO4LINUX-2 DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/common/saa7146/
 F:	drivers/media/pci/saa7146/
 F:	include/media/drv-intf/saa7146*
@@ -14710,8 +14737,8 @@
 SAFESETID SECURITY MODULE
 M:	Micah Morton <mortonm@chromium.org>
 S:	Supported
-F:	security/safesetid/
 F:	Documentation/admin-guide/LSM/SafeSetID.rst
+F:	security/safesetid/
 
 SAMSUNG AUDIO (ASoC) DRIVERS
 M:	Krzysztof Kozlowski <krzk@kernel.org>
@@ -14719,23 +14746,23 @@
 M:	Sylwester Nawrocki <s.nawrocki@samsung.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 S:	Supported
-F:	sound/soc/samsung/
 F:	Documentation/devicetree/bindings/sound/samsung*
+F:	sound/soc/samsung/
 
 SAMSUNG EXYNOS PSEUDO RANDOM NUMBER GENERATOR (RNG) DRIVER
 M:	Krzysztof Kozlowski <krzk@kernel.org>
 L:	linux-crypto@vger.kernel.org
 L:	linux-samsung-soc@vger.kernel.org
 S:	Maintained
-F:	drivers/crypto/exynos-rng.c
 F:	Documentation/devicetree/bindings/rng/samsung,exynos4-rng.yaml
+F:	drivers/crypto/exynos-rng.c
 
 SAMSUNG EXYNOS TRUE RANDOM NUMBER GENERATOR (TRNG) DRIVER
 M:	Łukasz Stelmach <l.stelmach@samsung.com>
 L:	linux-samsung-soc@vger.kernel.org
 S:	Maintained
-F:	drivers/char/hw_random/exynos-trng.c
 F:	Documentation/devicetree/bindings/rng/samsung,exynos5250-trng.txt
+F:	drivers/char/hw_random/exynos-trng.c
 
 SAMSUNG FRAMEBUFFER DRIVER
 M:	Jingoo Han <jingoohan1@gmail.com>
@@ -14756,16 +14783,16 @@
 L:	linux-kernel@vger.kernel.org
 L:	linux-samsung-soc@vger.kernel.org
 S:	Supported
-F:	drivers/mfd/sec*.c
-F:	drivers/regulator/s2m*.c
-F:	drivers/regulator/s5m*.c
-F:	drivers/clk/clk-s2mps11.c
-F:	drivers/rtc/rtc-s5m.c
-F:	include/linux/mfd/samsung/
+F:	Documentation/devicetree/bindings/clock/samsung,s2mps11.txt
 F:	Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
 F:	Documentation/devicetree/bindings/regulator/samsung,s2m*.txt
 F:	Documentation/devicetree/bindings/regulator/samsung,s5m*.txt
-F:	Documentation/devicetree/bindings/clock/samsung,s2mps11.txt
+F:	drivers/clk/clk-s2mps11.c
+F:	drivers/mfd/sec*.c
+F:	drivers/regulator/s2m*.c
+F:	drivers/regulator/s5m*.c
+F:	drivers/rtc/rtc-s5m.c
+F:	include/linux/mfd/samsung/
 
 SAMSUNG S3C24XX/S3C64XX SOC SERIES CAMIF DRIVER
 M:	Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
@@ -14811,22 +14838,22 @@
 M:	Kyungmin Park <kyungmin.park@samsung.com>
 M:	Sylwester Nawrocki <s.nawrocki@samsung.com>
 L:	linux-media@vger.kernel.org
-Q:	https://patchwork.linuxtv.org/project/linux-media/list/
 S:	Supported
+Q:	https://patchwork.linuxtv.org/project/linux-media/list/
 F:	drivers/media/platform/exynos4-is/
 
 SAMSUNG SOC CLOCK DRIVERS
 M:	Sylwester Nawrocki <s.nawrocki@samsung.com>
 M:	Tomasz Figa <tomasz.figa@gmail.com>
 M:	Chanwoo Choi <cw00.choi@samsung.com>
-S:	Supported
 L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
+S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk.git
-F:	drivers/clk/samsung/
-F:	include/dt-bindings/clock/exynos*.h
 F:	Documentation/devicetree/bindings/clock/exynos*.txt
 F:	Documentation/devicetree/bindings/clock/samsung,s3c*
 F:	Documentation/devicetree/bindings/clock/samsung,s5p*
+F:	drivers/clk/samsung/
+F:	include/dt-bindings/clock/exynos*.h
 
 SAMSUNG SPI DRIVERS
 M:	Kukjin Kim <kgene@kernel.org>
@@ -14841,8 +14868,8 @@
 
 SAMSUNG SXGBE DRIVERS
 M:	Byungho An <bh74.an@samsung.com>
-S:	Supported
 L:	netdev@vger.kernel.org
+S:	Supported
 F:	drivers/net/ethernet/samsung/sxgbe/
 
 SAMSUNG THERMAL DRIVER
@@ -14882,13 +14909,13 @@
 R:	Ben Segall <bsegall@google.com> (CONFIG_CFS_BANDWIDTH)
 R:	Mel Gorman <mgorman@suse.de> (CONFIG_NUMA_BALANCING)
 L:	linux-kernel@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git sched/core
 S:	Maintained
-F:	kernel/sched/
-F:	include/linux/sched.h
-F:	include/uapi/linux/sched.h
-F:	include/linux/wait.h
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git sched/core
 F:	include/linux/preempt.h
+F:	include/linux/sched.h
+F:	include/linux/wait.h
+F:	include/uapi/linux/sched.h
+F:	kernel/sched/
 
 SCR24X CHIP CARD INTERFACE DRIVER
 M:	Lubomir Rintel <lkundrak@v3.sk>
@@ -14898,8 +14925,8 @@
 SCSI CDROM DRIVER
 M:	Jens Axboe <axboe@kernel.dk>
 L:	linux-scsi@vger.kernel.org
-W:	http://www.kernel.dk
 S:	Maintained
+W:	http://www.kernel.dk
 F:	drivers/scsi/sr*
 
 SCSI RDMA PROTOCOL (SRP) INITIATOR
@@ -14921,20 +14948,20 @@
 SCSI SG DRIVER
 M:	Doug Gilbert <dgilbert@interlog.com>
 L:	linux-scsi@vger.kernel.org
-W:	http://sg.danny.cz/sg
 S:	Maintained
-F:	Documentation/scsi/scsi-generic.txt
+W:	http://sg.danny.cz/sg
+F:	Documentation/scsi/scsi-generic.rst
 F:	drivers/scsi/sg.c
 F:	include/scsi/sg.h
 
 SCSI SUBSYSTEM
 M:	"James E.J. Bottomley" <jejb@linux.ibm.com>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git
 M:	"Martin K. Petersen" <martin.petersen@oracle.com>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi.git
-Q:	https://patchwork.kernel.org/project/linux-scsi/list/
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
+Q:	https://patchwork.kernel.org/project/linux-scsi/list/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi.git
 F:	Documentation/devicetree/bindings/scsi/
 F:	drivers/scsi/
 F:	include/scsi/
@@ -14943,7 +14970,7 @@
 M:	Kai Mäkisara <Kai.Makisara@kolumbus.fi>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
-F:	Documentation/scsi/st.txt
+F:	Documentation/scsi/st.rst
 F:	drivers/scsi/st.*
 F:	drivers/scsi/st_*.h
 
@@ -14951,25 +14978,25 @@
 M:	"Martin K. Petersen" <martin.petersen@oracle.com>
 L:	linux-scsi@vger.kernel.org
 L:	target-devel@vger.kernel.org
-W:	http://www.linux-iscsi.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi.git
-Q:	https://patchwork.kernel.org/project/target-devel/list/
 S:	Supported
+W:	http://www.linux-iscsi.org
+Q:	https://patchwork.kernel.org/project/target-devel/list/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi.git
+F:	Documentation/target/
 F:	drivers/target/
 F:	include/target/
-F:	Documentation/target/
 
 SCTP PROTOCOL
 M:	Vlad Yasevich <vyasevich@gmail.com>
 M:	Neil Horman <nhorman@tuxdriver.com>
 M:	Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
 L:	linux-sctp@vger.kernel.org
-W:	http://lksctp.sourceforge.net
 S:	Maintained
+W:	http://lksctp.sourceforge.net
 F:	Documentation/networking/sctp.txt
 F:	include/linux/sctp.h
-F:	include/uapi/linux/sctp.h
 F:	include/net/sctp/
+F:	include/uapi/linux/sctp.h
 F:	net/sctp/
 
 SCx200 CPU SUPPORT
@@ -14977,9 +15004,9 @@
 S:	Odd Fixes
 F:	Documentation/i2c/busses/scx200_acb.rst
 F:	arch/x86/platform/scx200/
-F:	drivers/watchdog/scx200_wdt.c
 F:	drivers/i2c/busses/scx200*
 F:	drivers/mtd/maps/scx200_docflash.c
+F:	drivers/watchdog/scx200_wdt.c
 F:	include/linux/scx200.h
 
 SCx200 GPIO DRIVER
@@ -15009,14 +15036,14 @@
 M:	Kees Cook <keescook@chromium.org>
 R:	Andy Lutomirski <luto@amacapital.net>
 R:	Will Drewry <wad@chromium.org>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git seccomp
 S:	Supported
-F:	kernel/seccomp.c
-F:	include/uapi/linux/seccomp.h
-F:	include/linux/seccomp.h
-F:	tools/testing/selftests/seccomp/*
-F:	tools/testing/selftests/kselftest_harness.h
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git seccomp
 F:	Documentation/userspace-api/seccomp_filter.rst
+F:	include/linux/seccomp.h
+F:	include/uapi/linux/seccomp.h
+F:	kernel/seccomp.c
+F:	tools/testing/selftests/kselftest_harness.h
+F:	tools/testing/selftests/seccomp/*
 K:	\bsecure_computing
 K:	\bTIF_SECCOMP\b
 
@@ -15034,21 +15061,6 @@
 F:	drivers/mmc/host/sdhci*
 F:	include/linux/mmc/sdhci*
 
-EMMC CMDQ HOST CONTROLLER INTERFACE (CQHCI) DRIVER
-M:	Adrian Hunter <adrian.hunter@intel.com>
-M:	Ritesh Harjani <riteshh@codeaurora.org>
-M:	Asutosh Das <asutoshd@codeaurora.org>
-L:	linux-mmc@vger.kernel.org
-S:	Maintained
-F:	drivers/mmc/host/cqhci*
-
-SYNOPSYS SDHCI COMPLIANT DWC MSHC DRIVER
-M:	Prabu Thangamuthu <prabu.t@synopsys.com>
-M:	Manjunath M B <manjumb@synopsys.com>
-L:	linux-mmc@vger.kernel.org
-S:	Maintained
-F:	drivers/mmc/host/sdhci-pci-dwc-mshc.c
-
 SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) MICROCHIP DRIVER
 M:	Ludovic Desroches <ludovic.desroches@microchip.com>
 L:	linux-mmc@vger.kernel.org
@@ -15079,8 +15091,8 @@
 M:	Revanth Rajashekar <revanth.rajashekar@intel.com>
 L:	linux-block@vger.kernel.org
 S:	Supported
-F:	block/sed*
 F:	block/opal_proto.h
+F:	block/sed*
 F:	include/linux/sed*
 F:	include/uapi/linux/sed*
 
@@ -15092,9 +15104,9 @@
 M:	James Morris <jmorris@namei.org>
 M:	"Serge E. Hallyn" <serge@hallyn.com>
 L:	linux-security-module@vger.kernel.org (suggested Cc:)
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security.git
-W:	http://kernsec.org/
 S:	Supported
+W:	http://kernsec.org/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security.git
 F:	security/
 X:	security/selinux/
 
@@ -15103,16 +15115,16 @@
 M:	Stephen Smalley <stephen.smalley.work@gmail.com>
 M:	Eric Paris <eparis@parisplace.org>
 L:	selinux@vger.kernel.org
+S:	Supported
 W:	https://selinuxproject.org
 W:	https://github.com/SELinuxProject
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux.git
-S:	Supported
-F:	include/uapi/linux/selinux_netlink.h
-F:	security/selinux/
-F:	scripts/selinux/
-F:	Documentation/admin-guide/LSM/SELinux.rst
-F:	Documentation/ABI/obsolete/sysfs-selinux-disable
 F:	Documentation/ABI/obsolete/sysfs-selinux-checkreqprot
+F:	Documentation/ABI/obsolete/sysfs-selinux-disable
+F:	Documentation/admin-guide/LSM/SELinux.rst
+F:	include/uapi/linux/selinux_netlink.h
+F:	scripts/selinux/
+F:	security/selinux/
 
 SENSABLE PHANTOM
 M:	Jiri Slaby <jirislaby@gmail.com>
@@ -15123,14 +15135,14 @@
 SENSIRION SPS30 AIR POLLUTION SENSOR DRIVER
 M:	Tomasz Duszynski <tduszyns@gmail.com>
 S:	Maintained
-F:	drivers/iio/chemical/sps30.c
 F:	Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml
+F:	drivers/iio/chemical/sps30.c
 
 SERIAL DEVICE BUS
 M:	Rob Herring <robh@kernel.org>
 L:	linux-serial@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/serial/slave-device.txt
+F:	Documentation/devicetree/bindings/serial/serial.yaml
 F:	drivers/tty/serdev/
 F:	include/linux/serdev.h
 
@@ -15147,6 +15159,14 @@
 S:	Maintained
 F:	drivers/media/rc/serial_ir.c
 
+SERIAL LOW-POWER INTER-CHIP MEDIA BUS (SLIMbus)
+M:	Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
+S:	Maintained
+F:	Documentation/devicetree/bindings/slimbus/
+F:	drivers/slimbus/
+F:	include/linux/slimbus.h
+
 SFC NETWORK DRIVER
 M:	Solarflare linux maintainers <linux-net-drivers@solarflare.com>
 M:	Edward Cree <ecree@solarflare.com>
@@ -15180,23 +15200,23 @@
 M:	Ursula Braun <ubraun@linux.ibm.com>
 M:	Karsten Graul <kgraul@linux.ibm.com>
 L:	linux-s390@vger.kernel.org
-W:	http://www.ibm.com/developerworks/linux/linux390/
 S:	Supported
+W:	http://www.ibm.com/developerworks/linux/linux390/
 F:	net/smc/
 
 SHARP GP2AP002A00F/GP2AP002S00F SENSOR DRIVER
 M:	Linus Walleij <linus.walleij@linaro.org>
 L:	linux-iio@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git
 S:	Maintained
-F:	drivers/iio/light/gp2ap002.c
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git
 F:	Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml
+F:	drivers/iio/light/gp2ap002.c
 
 SHARP RJ54N1CB0C SENSOR DRIVER
 M:	Jacopo Mondi <jacopo@jmondi.org>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Odd fixes
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/i2c/rj54n1cb0c.c
 F:	include/media/i2c/rj54n1cb0c.h
 
@@ -15214,107 +15234,107 @@
 SI2157 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
-S:	Maintained
 F:	drivers/media/tuners/si2157*
 
 SI2165 MEDIA DRIVER
 M:	Matthias Schwarzott <zzam@gentoo.org>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
-S:	Maintained
 F:	drivers/media/dvb-frontends/si2165*
 
 SI2168 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
-S:	Maintained
 F:	drivers/media/dvb-frontends/si2168*
 
 SI470X FM RADIO RECEIVER I2C DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
-W:	https://linuxtv.org
 S:	Odd Fixes
+W:	https://linuxtv.org
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/radio/si470x/radio-si470x-i2c.c
 
 SI470X FM RADIO RECEIVER USB DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
-W:	https://linuxtv.org
 S:	Maintained
+W:	https://linuxtv.org
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/radio/si470x/radio-si470x-common.c
-F:	drivers/media/radio/si470x/radio-si470x.h
 F:	drivers/media/radio/si470x/radio-si470x-usb.c
+F:	drivers/media/radio/si470x/radio-si470x.h
 
 SI4713 FM RADIO TRANSMITTER I2C DRIVER
 M:	Eduardo Valentin <edubezval@gmail.com>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
-W:	https://linuxtv.org
 S:	Odd Fixes
+W:	https://linuxtv.org
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/radio/si4713/si4713.?
 
 SI4713 FM RADIO TRANSMITTER PLATFORM DRIVER
 M:	Eduardo Valentin <edubezval@gmail.com>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
-W:	https://linuxtv.org
 S:	Odd Fixes
+W:	https://linuxtv.org
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/radio/si4713/radio-platform-si4713.c
 
 SI4713 FM RADIO TRANSMITTER USB DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
-W:	https://linuxtv.org
 S:	Maintained
+W:	https://linuxtv.org
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/radio/si4713/radio-usb-si4713.c
 
 SIANO DVB DRIVER
 M:	Mauro Carvalho Chehab <mchehab@kernel.org>
 L:	linux-media@vger.kernel.org
+S:	Odd fixes
 W:	https://linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
-S:	Odd fixes
 F:	drivers/media/common/siano/
-F:	drivers/media/usb/siano/
-F:	drivers/media/usb/siano/
 F:	drivers/media/mmc/siano/
-
-SIFIVE PDMA DRIVER
-M:	Green Wan <green.wan@sifive.com>
-S:	Maintained
-F:	drivers/dma/sf-pdma/
-F:	Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
+F:	drivers/media/usb/siano/
+F:	drivers/media/usb/siano/
 
 SIFIVE DRIVERS
 M:	Palmer Dabbelt <palmer@dabbelt.com>
 M:	Paul Walmsley <paul.walmsley@sifive.com>
 L:	linux-riscv@lists.infradead.org
-T:	git git://github.com/sifive/riscv-linux.git
 S:	Supported
-K:	[^@]sifive
+T:	git git://github.com/sifive/riscv-linux.git
 N:	sifive
+K:	[^@]sifive
 
 SIFIVE FU540 SYSTEM-ON-CHIP
 M:	Paul Walmsley <paul.walmsley@sifive.com>
 M:	Palmer Dabbelt <palmer@dabbelt.com>
 L:	linux-riscv@lists.infradead.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/pjw/sifive.git
 S:	Supported
-K:	fu540
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/pjw/sifive.git
 N:	fu540
+K:	fu540
+
+SIFIVE PDMA DRIVER
+M:	Green Wan <green.wan@sifive.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
+F:	drivers/dma/sf-pdma/
 
 SILEAD TOUCHSCREEN DRIVER
 M:	Hans de Goede <hdegoede@redhat.com>
@@ -15335,12 +15355,12 @@
 M:	Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
 L:	linux-fbdev@vger.kernel.org
 S:	Maintained
-F:	drivers/video/fbdev/sm712*
 F:	Documentation/fb/sm712fb.rst
+F:	drivers/video/fbdev/sm712*
 
 SIMPLE FIRMWARE INTERFACE (SFI)
-W:	http://simplefirmware.org/
 S:	Obsolete
+W:	http://simplefirmware.org/
 F:	arch/x86/platform/sfi/
 F:	drivers/sfi/
 F:	include/linux/sfi*.h
@@ -15356,34 +15376,34 @@
 SIMTEC EB110ATX (Chalice CATS)
 M:	Vincent Sanders <vince@simtec.co.uk>
 M:	Simtec Linux Team <linux@simtec.co.uk>
-W:	http://www.simtec.co.uk/products/EB110ATX/
 S:	Supported
+W:	http://www.simtec.co.uk/products/EB110ATX/
 
 SIMTEC EB2410ITX (BAST)
 M:	Vincent Sanders <vince@simtec.co.uk>
 M:	Simtec Linux Team <linux@simtec.co.uk>
-W:	http://www.simtec.co.uk/products/EB2410ITX/
 S:	Supported
-F:	arch/arm/mach-s3c24xx/mach-bast.c
+W:	http://www.simtec.co.uk/products/EB2410ITX/
 F:	arch/arm/mach-s3c24xx/bast-ide.c
 F:	arch/arm/mach-s3c24xx/bast-irq.c
-
-SIPHASH PRF ROUTINES
-M:	Jason A. Donenfeld <Jason@zx2c4.com>
-S:	Maintained
-F:	lib/siphash.c
-F:	lib/test_siphash.c
-F:	include/linux/siphash.h
+F:	arch/arm/mach-s3c24xx/mach-bast.c
 
 SIOX
 M:	Thorsten Scherer <t.scherer@eckelmann.de>
 M:	Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
 R:	Pengutronix Kernel Team <kernel@pengutronix.de>
 S:	Supported
-F:	drivers/siox/*
 F:	drivers/gpio/gpio-siox.c
+F:	drivers/siox/*
 F:	include/trace/events/siox.h
 
+SIPHASH PRF ROUTINES
+M:	Jason A. Donenfeld <Jason@zx2c4.com>
+S:	Maintained
+F:	include/linux/siphash.h
+F:	lib/siphash.c
+F:	lib/test_siphash.c
+
 SIS 190 ETHERNET DRIVER
 M:	Francois Romieu <romieu@fr.zoreil.com>
 L:	netdev@vger.kernel.org
@@ -15392,23 +15412,23 @@
 
 SIS 900/7016 FAST ETHERNET DRIVER
 M:	Daniele Venzano <venza@brownhat.org>
-W:	http://www.brownhat.org/sis900.html
 L:	netdev@vger.kernel.org
 S:	Maintained
+W:	http://www.brownhat.org/sis900.html
 F:	drivers/net/ethernet/sis/sis900.*
 
 SIS FRAMEBUFFER DRIVER
 M:	Thomas Winischhofer <thomas@winischhofer.net>
-W:	http://www.winischhofer.net/linuxsisvga.shtml
 S:	Maintained
+W:	http://www.winischhofer.net/linuxsisvga.shtml
 F:	Documentation/fb/sisfb.rst
 F:	drivers/video/fbdev/sis/
 F:	include/video/sisfb.h
 
 SIS USB2VGA DRIVER
 M:	Thomas Winischhofer <thomas@winischhofer.net>
-W:	http://www.winischhofer.at/linuxsisusbvga.shtml
 S:	Maintained
+W:	http://www.winischhofer.at/linuxsisusbvga.shtml
 F:	drivers/usb/misc/sisusbvga/
 
 SLAB ALLOCATOR
@@ -15429,26 +15449,18 @@
 R:	Steven Rostedt <rostedt@goodmis.org>
 R:	Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
 L:	rcu@vger.kernel.org
-W:	http://www.rdrop.com/users/paulmck/RCU/
 S:	Supported
+W:	http://www.rdrop.com/users/paulmck/RCU/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git dev
 F:	include/linux/srcu*.h
 F:	kernel/rcu/srcu*.c
 
-SERIAL LOW-POWER INTER-CHIP MEDIA BUS (SLIMbus)
-M:	Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
-S:	Maintained
-F:	drivers/slimbus/
-F:	Documentation/devicetree/bindings/slimbus/
-F:	include/linux/slimbus.h
-
 SMACK SECURITY MODULE
 M:	Casey Schaufler <casey@schaufler-ca.com>
 L:	linux-security-module@vger.kernel.org
+S:	Maintained
 W:	http://schaufler-ca.com
 T:	git git://github.com/cschaufler/smack-next
-S:	Maintained
 F:	Documentation/admin-guide/LSM/Smack.rst
 F:	security/smack/
 
@@ -15461,11 +15473,11 @@
 M:	Sakari Ailus <sakari.ailus@linux.intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-F:	drivers/media/i2c/smiapp/
+F:	Documentation/devicetree/bindings/media/i2c/nokia,smia.txt
 F:	drivers/media/i2c/smiapp-pll.c
 F:	drivers/media/i2c/smiapp-pll.h
+F:	drivers/media/i2c/smiapp/
 F:	include/uapi/linux/smiapp.h
-F:	Documentation/devicetree/bindings/media/i2c/nokia,smia.txt
 
 SMM665 HARDWARE MONITOR DRIVER
 M:	Guenter Roeck <linux@roeck-us.net>
@@ -15505,8 +15517,8 @@
 M:	Steve Glendinning <steve.glendinning@shawell.net>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	include/linux/smsc911x.h
 F:	drivers/net/ethernet/smsc/smsc911x.*
+F:	include/linux/smsc911x.h
 
 SMSC9420 PCI ETHERNET DRIVER
 M:	Steve Glendinning <steve.glendinning@shawell.net>
@@ -15516,17 +15528,40 @@
 
 SOC-CAMERA V4L2 SUBSYSTEM
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Orphan
-F:	include/media/soc_camera.h
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/staging/media/soc_camera/
+F:	include/media/soc_camera.h
+
+SOCIONEXT (SNI) AVE NETWORK DRIVER
+M:	Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/net/socionext,uniphier-ave4.txt
+F:	drivers/net/ethernet/socionext/sni_ave.c
+
+SOCIONEXT (SNI) NETSEC NETWORK DRIVER
+M:	Jassi Brar <jaswinder.singh@linaro.org>
+M:	Ilias Apalodimas <ilias.apalodimas@linaro.org>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/net/socionext-netsec.txt
+F:	drivers/net/ethernet/socionext/netsec.c
+
+SOCIONEXT (SNI) Synquacer SPI DRIVER
+M:	Masahisa Kojima <masahisa.kojima@linaro.org>
+M:	Jassi Brar <jaswinder.singh@linaro.org>
+L:	linux-spi@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/spi/spi-synquacer.txt
+F:	drivers/spi/spi-synquacer.c
 
 SOCIONEXT SYNQUACER I2C DRIVER
 M:	Ard Biesheuvel <ardb@kernel.org>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
-F:	drivers/i2c/busses/i2c-synquacer.c
 F:	Documentation/devicetree/bindings/i2c/i2c-synquacer.txt
+F:	drivers/i2c/busses/i2c-synquacer.c
 
 SOCIONEXT UNIPHIER SOUND DRIVER
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
@@ -15574,38 +15609,15 @@
 SOFTWARE RAID (Multiple Disks) SUPPORT
 M:	Song Liu <song@kernel.org>
 L:	linux-raid@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/song/md.git
 S:	Supported
-F:	drivers/md/Makefile
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/song/md.git
 F:	drivers/md/Kconfig
+F:	drivers/md/Makefile
 F:	drivers/md/md*
 F:	drivers/md/raid*
 F:	include/linux/raid/
 F:	include/uapi/linux/raid/
 
-SOCIONEXT (SNI) AVE NETWORK DRIVER
-M:	Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
-L:	netdev@vger.kernel.org
-S:	Maintained
-F:	drivers/net/ethernet/socionext/sni_ave.c
-F:	Documentation/devicetree/bindings/net/socionext,uniphier-ave4.txt
-
-SOCIONEXT (SNI) NETSEC NETWORK DRIVER
-M:	Jassi Brar <jaswinder.singh@linaro.org>
-M:	Ilias Apalodimas <ilias.apalodimas@linaro.org>
-L:	netdev@vger.kernel.org
-S:	Maintained
-F:	drivers/net/ethernet/socionext/netsec.c
-F:	Documentation/devicetree/bindings/net/socionext-netsec.txt
-
-SOCIONEXT (SNI) Synquacer SPI DRIVER
-M:	Masahisa Kojima <masahisa.kojima@linaro.org>
-M:	Jassi Brar <jaswinder.singh@linaro.org>
-L:	linux-spi@vger.kernel.org
-S:	Maintained
-F:	drivers/spi/spi-synquacer.c
-F:	Documentation/devicetree/bindings/spi/spi-synquacer.txt
-
 SOLIDRUN CLEARFOG SUPPORT
 M:	Russell King <linux@armlinux.org.uk>
 S:	Maintained
@@ -15635,54 +15647,54 @@
 SONY IMX214 SENSOR DRIVER
 M:	Ricardo Ribalda <ricardo.ribalda@gmail.com>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
-F:	drivers/media/i2c/imx214.c
+T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/devicetree/bindings/media/i2c/sony,imx214.txt
+F:	drivers/media/i2c/imx214.c
 
 SONY IMX219 SENSOR DRIVER
 M:	Dave Stevenson <dave.stevenson@raspberrypi.com>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
-F:	drivers/media/i2c/imx219.c
+T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/devicetree/bindings/media/i2c/imx219.yaml
+F:	drivers/media/i2c/imx219.c
 
 SONY IMX258 SENSOR DRIVER
 M:	Sakari Ailus <sakari.ailus@linux.intel.com>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/i2c/imx258.c
 
 SONY IMX274 SENSOR DRIVER
 M:	Leon Luo <leonl@leopardimaging.com>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
-F:	drivers/media/i2c/imx274.c
+T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/devicetree/bindings/media/i2c/imx274.txt
+F:	drivers/media/i2c/imx274.c
 
 SONY IMX290 SENSOR DRIVER
 M:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
-F:	drivers/media/i2c/imx290.c
+T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/devicetree/bindings/media/i2c/imx290.txt
+F:	drivers/media/i2c/imx290.c
 
 SONY IMX319 SENSOR DRIVER
 M:	Bingbu Cao <bingbu.cao@intel.com>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/i2c/imx319.c
 
 SONY IMX355 SENSOR DRIVER
 M:	Tianshu Qiu <tian.shu.qiu@intel.com>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/i2c/imx355.c
 
 SONY MEMORYSTICK SUBSYSTEM
@@ -15690,8 +15702,8 @@
 M:	Alex Dubov <oakad@yahoo.com>
 M:	Ulf Hansson <ulf.hansson@linaro.org>
 L:	linux-mmc@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc.git
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc.git
 F:	drivers/memstick/
 F:	include/linux/memstick.h
 
@@ -15709,10 +15721,10 @@
 M:	Jaroslav Kysela <perex@perex.cz>
 M:	Takashi Iwai <tiwai@suse.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
-W:	http://www.alsa-project.org/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
-Q:	http://patchwork.kernel.org/project/alsa-devel/list/
 S:	Maintained
+W:	http://www.alsa-project.org/
+Q:	http://patchwork.kernel.org/project/alsa-devel/list/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
 F:	Documentation/sound/
 F:	include/sound/
 F:	include/uapi/sound/
@@ -15721,8 +15733,8 @@
 SOUND - COMPRESSED AUDIO
 M:	Vinod Koul <vkoul@kernel.org>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
 S:	Supported
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
 F:	Documentation/sound/designs/compress-offload.rst
 F:	include/sound/compress_driver.h
 F:	include/uapi/sound/compress_*
@@ -15739,15 +15751,26 @@
 SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC)
 M:	Liam Girdwood <lgirdwood@gmail.com>
 M:	Mark Brown <broonie@kernel.org>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
-W:	http://alsa-project.org/main/index.php/ASoC
 S:	Supported
+W:	http://alsa-project.org/main/index.php/ASoC
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
 F:	Documentation/devicetree/bindings/sound/
 F:	Documentation/sound/soc/
-F:	sound/soc/
 F:	include/dt-bindings/sound/
 F:	include/sound/soc*
+F:	sound/soc/
+
+SOUND - SOUND OPEN FIRMWARE (SOF) DRIVERS
+M:	Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
+M:	Liam Girdwood <lgirdwood@gmail.com>
+M:	Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
+M:	Kai Vehmanen <kai.vehmanen@linux.intel.com>
+M:	Daniel Baluta <daniel.baluta@nxp.com>
+L:	sound-open-firmware@alsa-project.org (moderated for non-subscribers)
+S:	Supported
+W:	https://github.com/thesofproject/linux/
+F:	sound/soc/sof/
 
 SOUNDWIRE SUBSYSTEM
 M:	Vinod Koul <vkoul@kernel.org>
@@ -15762,28 +15785,27 @@
 SP2 MEDIA DRIVER
 M:	Olli Salonen <olli.salonen@iki.fi>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
-S:	Maintained
 F:	drivers/media/dvb-frontends/sp2*
 
 SPARC + UltraSPARC (sparc/sparc64)
 M:	"David S. Miller" <davem@davemloft.net>
 L:	sparclinux@vger.kernel.org
+S:	Maintained
 Q:	http://patchwork.ozlabs.org/project/sparclinux/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next.git
-S:	Maintained
 F:	arch/sparc/
 F:	drivers/sbus/
 
 SPARC SERIAL DRIVERS
 M:	"David S. Miller" <davem@davemloft.net>
 L:	sparclinux@vger.kernel.org
+S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next.git
-S:	Maintained
-F:	include/linux/sunserialcore.h
 F:	drivers/tty/serial/suncore.c
 F:	drivers/tty/serial/sunhv.c
 F:	drivers/tty/serial/sunsab.c
@@ -15792,47 +15814,49 @@
 F:	drivers/tty/serial/sunzilog.c
 F:	drivers/tty/serial/sunzilog.h
 F:	drivers/tty/vcc.c
+F:	include/linux/sunserialcore.h
 
 SPARSE CHECKER
 M:	"Luc Van Oostenryck" <luc.vanoostenryck@gmail.com>
 L:	linux-sparse@vger.kernel.org
+S:	Maintained
 W:	https://sparse.wiki.kernel.org/
 T:	git git://git.kernel.org/pub/scm/devel/sparse/sparse.git
-S:	Maintained
 F:	include/linux/compiler.h
 
 SPEAR CLOCK FRAMEWORK SUPPORT
 M:	Viresh Kumar <vireshk@kernel.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W:	http://www.st.com/spear
 S:	Maintained
+W:	http://www.st.com/spear
 F:	drivers/clk/spear/
 
 SPEAR PLATFORM SUPPORT
 M:	Viresh Kumar <vireshk@kernel.org>
 M:	Shiraz Hashim <shiraz.linux.kernel@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W:	http://www.st.com/spear
 S:	Maintained
+W:	http://www.st.com/spear
 F:	arch/arm/boot/dts/spear*
 F:	arch/arm/mach-spear/
 
 SPI NOR SUBSYSTEM
 M:	Tudor Ambarus <tudor.ambarus@microchip.com>
 L:	linux-mtd@lists.infradead.org
+S:	Maintained
 W:	http://www.linux-mtd.infradead.org/
 Q:	http://patchwork.ozlabs.org/project/linux-mtd/list/
+C:	irc://irc.oftc.net/mtd
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git spi-nor/next
-S:	Maintained
 F:	drivers/mtd/spi-nor/
 F:	include/linux/mtd/spi-nor.h
 
 SPI SUBSYSTEM
 M:	Mark Brown <broonie@kernel.org>
 L:	linux-spi@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git
-Q:	http://patchwork.kernel.org/project/spi-devel-general/list/
 S:	Maintained
+Q:	http://patchwork.kernel.org/project/spi-devel-general/list/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git
 F:	Documentation/devicetree/bindings/spi/
 F:	Documentation/spi/
 F:	drivers/spi/
@@ -15859,17 +15883,17 @@
 SPU FILE SYSTEM
 M:	Jeremy Kerr <jk@ozlabs.org>
 L:	linuxppc-dev@lists.ozlabs.org
-W:	http://www.ibm.com/developerworks/power/cell/
 S:	Supported
+W:	http://www.ibm.com/developerworks/power/cell/
 F:	Documentation/filesystems/spufs.txt
 F:	arch/powerpc/platforms/cell/spufs/
 
 SQUASHFS FILE SYSTEM
 M:	Phillip Lougher <phillip@squashfs.org.uk>
 L:	squashfs-devel@lists.sourceforge.net (subscribers-only)
+S:	Maintained
 W:	http://squashfs.org.uk
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-next.git
-S:	Maintained
 F:	Documentation/filesystems/squashfs.rst
 F:	fs/squashfs/
 
@@ -15881,18 +15905,18 @@
 ST LSM6DSx IMU IIO DRIVER
 M:	Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
 L:	linux-iio@vger.kernel.org
-W:	http://www.st.com/
 S:	Maintained
-F:	drivers/iio/imu/st_lsm6dsx/
+W:	http://www.st.com/
 F:	Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
+F:	drivers/iio/imu/st_lsm6dsx/
 
 ST MIPID02 CSI-2 TO PARALLEL BRIDGE DRIVER
 M:	Mickael Guene <mickael.guene@st.com>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
-F:	drivers/media/i2c/st-mipid02.c
+T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/devicetree/bindings/media/i2c/st,st-mipid02.txt
+F:	drivers/media/i2c/st-mipid02.c
 
 ST STM32 I2C/SMBUS DRIVER
 M:	Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
@@ -15904,8 +15928,8 @@
 M:	Song Qiang <songqiang1304521@gmail.com>
 L:	linux-iio@vger.kernel.org
 S:	Maintained
-F:	drivers/iio/proximity/vl53l0x-i2c.c
 F:	Documentation/devicetree/bindings/iio/proximity/vl53l0x.txt
+F:	drivers/iio/proximity/vl53l0x-i2c.c
 
 STABLE BRANCH
 M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
@@ -15949,20 +15973,28 @@
 M:	Jens Frederich <jfrederich@gmail.com>
 M:	Daniel Drake <dsd@laptop.org>
 M:	Jon Nettleton <jon.nettleton@gmail.com>
-W:	http://wiki.laptop.org/go/DCON
 S:	Maintained
+W:	http://wiki.laptop.org/go/DCON
 F:	drivers/staging/olpc_dcon/
 
+STAGING - REALTEK RTL8188EU DRIVERS
+M:	Larry Finger <Larry.Finger@lwfinger.net>
+S:	Odd Fixes
+F:	drivers/staging/rtl8188eu/
+
 STAGING - REALTEK RTL8712U DRIVERS
 M:	Larry Finger <Larry.Finger@lwfinger.net>
 M:	Florian Schilhabel <florian.c.schilhabel@googlemail.com>.
 S:	Odd Fixes
 F:	drivers/staging/rtl8712/
 
-STAGING - REALTEK RTL8188EU DRIVERS
-M:	Larry Finger <Larry.Finger@lwfinger.net>
-S:	Odd Fixes
-F:	drivers/staging/rtl8188eu/
+STAGING - SEPS525 LCD CONTROLLER DRIVERS
+M:	Michael Hennerich <michael.hennerich@analog.com>
+M:	Beniamin Bia <beniamin.bia@analog.com>
+L:	linux-fbdev@vger.kernel.org
+S:	Supported
+F:	Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
+F:	drivers/staging/fbtft/fb_seps525.c
 
 STAGING - SILICON MOTION SM750 FRAME BUFFER DRIVER
 M:	Sudip Mukherjee <sudipm.mukherjee@gmail.com>
@@ -15978,8 +16010,8 @@
 M:	Kirk Reiser <kirk@reisers.ca>
 M:	Samuel Thibault <samuel.thibault@ens-lyon.org>
 L:	speakup@linux-speakup.org
-W:	http://www.linux-speakup.org/
 S:	Odd Fixes
+W:	http://www.linux-speakup.org/
 F:	drivers/staging/speakup/
 
 STAGING - VIA VT665X DRIVERS
@@ -15994,19 +16026,11 @@
 S:	Supported
 F:	drivers/staging/wilc1000/
 
-STAGING - SEPS525 LCD CONTROLLER DRIVERS
-M:	Michael Hennerich <michael.hennerich@analog.com>
-M:	Beniamin Bia <beniamin.bia@analog.com>
-L:	linux-fbdev@vger.kernel.org
-S:	Supported
-F:	drivers/staging/fbtft/fb_seps525.c
-F:	Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
-
 STAGING SUBSYSTEM
 M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git
 L:	devel@driverdev.osuosl.org
 S:	Supported
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git
 F:	drivers/staging/
 
 STARFIRE/DURALAN NETWORK DRIVER
@@ -16030,14 +16054,14 @@
 STI CEC DRIVER
 M:	Benjamin Gaignard <benjamin.gaignard@linaro.org>
 S:	Maintained
-F:	drivers/media/platform/sti/cec/
 F:	Documentation/devicetree/bindings/media/stih-cec.txt
+F:	drivers/media/platform/sti/cec/
 
 STK1160 USB VIDEO CAPTURE DRIVER
 M:	Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/usb/stk1160/
 
 STM32 AUDIO (ASoC) DRIVERS
@@ -16051,39 +16075,29 @@
 STM32 TIMER/LPTIMER DRIVERS
 M:	Fabrice Gasnier <fabrice.gasnier@st.com>
 S:	Maintained
+F:	Documentation/ABI/testing/*timer-stm32
+F:	Documentation/devicetree/bindings/*/*stm32-*timer*
 F:	drivers/*/stm32-*timer*
 F:	drivers/pwm/pwm-stm32*
 F:	include/linux/*/stm32-*tim*
-F:	Documentation/ABI/testing/*timer-stm32
-F:	Documentation/devicetree/bindings/*/*stm32-*timer*
-F:	Documentation/devicetree/bindings/pwm/pwm-stm32*
 
 STMMAC ETHERNET DRIVER
 M:	Giuseppe Cavallaro <peppe.cavallaro@st.com>
 M:	Alexandre Torgue <alexandre.torgue@st.com>
 M:	Jose Abreu <joabreu@synopsys.com>
 L:	netdev@vger.kernel.org
-W:	http://www.stlinux.com
 S:	Supported
+W:	http://www.stlinux.com
 F:	Documentation/networking/device_drivers/stmicro/
 F:	drivers/net/ethernet/stmicro/stmmac/
 
-EXTRA BOOT CONFIG
-M:	Masami Hiramatsu <mhiramat@kernel.org>
-S:	Maintained
-F:	lib/bootconfig.c
-F:	fs/proc/bootconfig.c
-F:	include/linux/bootconfig.h
-F:	tools/bootconfig/*
-F:	Documentation/admin-guide/bootconfig.rst
-
 SUN3/3X
 M:	Sam Creasey <sammy@sammy.net>
-W:	http://sammy.net/sun3/
 S:	Maintained
+W:	http://sammy.net/sun3/
+F:	arch/m68k/include/asm/sun3*
 F:	arch/m68k/kernel/*sun3*
 F:	arch/m68k/sun3*/
-F:	arch/m68k/include/asm/sun3*
 F:	drivers/net/ethernet/i825xx/sun3*
 
 SUN4I LOW RES ADC ATTACHED TABLET KEYS DRIVER
@@ -16103,8 +16117,8 @@
 M:	Yoshinori Sato <ysato@users.sourceforge.jp>
 M:	Rich Felker <dalias@libc.org>
 L:	linux-sh@vger.kernel.org
-Q:	http://patchwork.kernel.org/project/linux-sh/list/
 S:	Maintained
+Q:	http://patchwork.kernel.org/project/linux-sh/list/
 F:	Documentation/sh/
 F:	arch/sh/
 F:	drivers/sh/
@@ -16114,15 +16128,15 @@
 M:	Len Brown <len.brown@intel.com>
 M:	Pavel Machek <pavel@ucw.cz>
 L:	linux-pm@vger.kernel.org
-B:	https://bugzilla.kernel.org
 S:	Supported
+B:	https://bugzilla.kernel.org
 F:	Documentation/power/
 F:	arch/x86/kernel/acpi/
 F:	drivers/base/power/
-F:	kernel/power/
-F:	include/linux/suspend.h
 F:	include/linux/freezer.h
 F:	include/linux/pm.h
+F:	include/linux/suspend.h
+F:	kernel/power/
 
 SVGA HANDLING
 M:	Martin Mares <mj@ucw.cz>
@@ -16134,75 +16148,75 @@
 SWIOTLB SUBSYSTEM
 M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
 L:	iommu@lists.linux-foundation.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb.git
 S:	Supported
-F:	kernel/dma/swiotlb.c
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb.git
 F:	arch/*/kernel/pci-swiotlb.c
 F:	include/linux/swiotlb.h
+F:	kernel/dma/swiotlb.c
 
 SWITCHDEV
 M:	Jiri Pirko <jiri@resnulli.us>
 M:	Ivan Vecera <ivecera@redhat.com>
 L:	netdev@vger.kernel.org
 S:	Supported
-F:	net/switchdev/
 F:	include/net/switchdev.h
+F:	net/switchdev/
 
 SY8106A REGULATOR DRIVER
 M:	Icenowy Zheng <icenowy@aosc.io>
 S:	Maintained
-F:	drivers/regulator/sy8106a-regulator.c
 F:	Documentation/devicetree/bindings/regulator/sy8106a-regulator.txt
+F:	drivers/regulator/sy8106a-regulator.c
 
 SYNC FILE FRAMEWORK
 M:	Sumit Semwal <sumit.semwal@linaro.org>
 R:	Gustavo Padovan <gustavo@padovan.org>
-S:	Maintained
 L:	linux-media@vger.kernel.org
 L:	dri-devel@lists.freedesktop.org
-F:	drivers/dma-buf/sync_*
+S:	Maintained
+T:	git git://anongit.freedesktop.org/drm/drm-misc
+F:	Documentation/driver-api/sync_file.rst
 F:	drivers/dma-buf/dma-fence*
 F:	drivers/dma-buf/sw_sync.c
+F:	drivers/dma-buf/sync_*
 F:	include/linux/sync_file.h
 F:	include/uapi/linux/sync_file.h
-F:	Documentation/driver-api/sync_file.rst
-T:	git git://anongit.freedesktop.org/drm/drm-misc
 
 SYNOPSYS ARC ARCHITECTURE
 M:	Vineet Gupta <vgupta@synopsys.com>
 L:	linux-snps-arc@lists.infradead.org
 S:	Supported
-F:	arch/arc/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc.git
 F:	Documentation/devicetree/bindings/arc/*
 F:	Documentation/devicetree/bindings/interrupt-controller/snps,arc*
+F:	arch/arc/
 F:	drivers/clocksource/arc_timer.c
 F:	drivers/tty/serial/arc_uart.c
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc.git
 
 SYNOPSYS ARC HSDK SDP pll clock driver
 M:	Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
 S:	Supported
-F:	drivers/clk/clk-hsdk-pll.c
 F:	Documentation/devicetree/bindings/clock/snps,hsdk-pll-clock.txt
+F:	drivers/clk/clk-hsdk-pll.c
 
 SYNOPSYS ARC SDP clock driver
 M:	Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
 S:	Supported
-F:	drivers/clk/axs10x/*
 F:	Documentation/devicetree/bindings/clock/snps,pll-clock.txt
+F:	drivers/clk/axs10x/*
 
 SYNOPSYS ARC SDP platform support
 M:	Alexey Brodkin <abrodkin@synopsys.com>
 S:	Supported
-F:	arch/arc/plat-axs10x
-F:	arch/arc/boot/dts/ax*
 F:	Documentation/devicetree/bindings/arc/axs10*
+F:	arch/arc/boot/dts/ax*
+F:	arch/arc/plat-axs10x
 
 SYNOPSYS AXS10x RESET CONTROLLER DRIVER
 M:	Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
 S:	Supported
-F:	drivers/reset/reset-axs10x.c
 F:	Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt
+F:	drivers/reset/reset-axs10x.c
 
 SYNOPSYS CREG GPIO DRIVER
 M:	Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
@@ -16227,8 +16241,8 @@
 SYNOPSYS DESIGNWARE AXI DMAC DRIVER
 M:	Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
 S:	Maintained
-F:	drivers/dma/dw-axi-dmac/
 F:	Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.txt
+F:	drivers/dma/dw-axi-dmac/
 
 SYNOPSYS DESIGNWARE DMAC DRIVER
 M:	Viresh Kumar <vireshk@kernel.org>
@@ -16271,15 +16285,22 @@
 SYNOPSYS HSDK RESET CONTROLLER DRIVER
 M:	Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
 S:	Supported
+F:	Documentation/devicetree/bindings/reset/snps,hsdk-reset.txt
 F:	drivers/reset/reset-hsdk.c
 F:	include/dt-bindings/reset/snps,hsdk-reset.h
-F:	Documentation/devicetree/bindings/reset/snps,hsdk-reset.txt
+
+SYNOPSYS SDHCI COMPLIANT DWC MSHC DRIVER
+M:	Prabu Thangamuthu <prabu.t@synopsys.com>
+M:	Manjunath M B <manjumb@synopsys.com>
+L:	linux-mmc@vger.kernel.org
+S:	Maintained
+F:	drivers/mmc/host/sdhci-pci-dwc-mshc.c
 
 SYSTEM CONFIGURATION (SYSCON)
 M:	Lee Jones <lee.jones@linaro.org>
 M:	Arnd Bergmann <arnd@arndb.de>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git
 S:	Supported
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git
 F:	drivers/mfd/syscon.c
 
 SYSTEM CONTROL & POWER/MANAGEMENT INTERFACE (SCPI/SCMI) Message Protocol drivers
@@ -16289,8 +16310,8 @@
 F:	Documentation/devicetree/bindings/arm/arm,sc[mp]i.txt
 F:	drivers/clk/clk-sc[mp]i.c
 F:	drivers/cpufreq/sc[mp]i-cpufreq.c
-F:	drivers/firmware/arm_scpi.c
 F:	drivers/firmware/arm_scmi/
+F:	drivers/firmware/arm_scpi.c
 F:	drivers/reset/reset-scmi.c
 F:	include/linux/sc[mp]i_protocol.h
 F:	include/trace/events/scmi.h
@@ -16298,8 +16319,8 @@
 SYSTEM RESET/SHUTDOWN DRIVERS
 M:	Sebastian Reichel <sre@kernel.org>
 L:	linux-pm@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply.git
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply.git
 F:	Documentation/devicetree/bindings/power/reset/
 F:	drivers/power/reset/
 
@@ -16357,125 +16378,125 @@
 TCP LOW PRIORITY MODULE
 M:	"Wong Hoi Sing, Edison" <hswong3i@gmail.com>
 M:	"Hung Hing Lun, Mike" <hlhung3i@gmail.com>
-W:	http://tcp-lp-mod.sourceforge.net/
 S:	Maintained
+W:	http://tcp-lp-mod.sourceforge.net/
 F:	net/ipv4/tcp_lp.c
 
 TDA10071 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
-S:	Maintained
 F:	drivers/media/dvb-frontends/tda10071*
 
 TDA18212 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
-S:	Maintained
 F:	drivers/media/tuners/tda18212*
 
 TDA18218 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
-S:	Maintained
 F:	drivers/media/tuners/tda18218*
 
 TDA18250 MEDIA DRIVER
 M:	Olli Salonen <olli.salonen@iki.fi>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/media_tree.git
-S:	Maintained
 F:	drivers/media/tuners/tda18250*
 
 TDA18271 MEDIA DRIVER
 M:	Michael Krufky <mkrufky@linuxtv.org>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 W:	http://github.com/mkrufky
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/mkrufky/tuners.git
-S:	Maintained
 F:	drivers/media/tuners/tda18271*
 
 TDA1997x MEDIA DRIVER
 M:	Tim Harvey <tharvey@gateworks.com>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
-S:	Maintained
 F:	drivers/media/i2c/tda1997x.*
 
 TDA827x MEDIA DRIVER
 M:	Michael Krufky <mkrufky@linuxtv.org>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 W:	http://github.com/mkrufky
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/mkrufky/tuners.git
-S:	Maintained
 F:	drivers/media/tuners/tda8290.*
 
 TDA8290 MEDIA DRIVER
 M:	Michael Krufky <mkrufky@linuxtv.org>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 W:	http://github.com/mkrufky
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/mkrufky/tuners.git
-S:	Maintained
 F:	drivers/media/tuners/tda8290.*
 
 TDA9840 MEDIA DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
-W:	https://linuxtv.org
 S:	Maintained
+W:	https://linuxtv.org
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/i2c/tda9840*
 
 TEA5761 TUNER DRIVER
 M:	Mauro Carvalho Chehab <mchehab@kernel.org>
 L:	linux-media@vger.kernel.org
+S:	Odd fixes
 W:	https://linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
-S:	Odd fixes
 F:	drivers/media/tuners/tea5761.*
 
 TEA5767 TUNER DRIVER
 M:	Mauro Carvalho Chehab <mchehab@kernel.org>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
-S:	Maintained
 F:	drivers/media/tuners/tea5767.*
 
 TEA6415C MEDIA DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
-W:	https://linuxtv.org
 S:	Maintained
+W:	https://linuxtv.org
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/i2c/tea6415c*
 
 TEA6420 MEDIA DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
-W:	https://linuxtv.org
 S:	Maintained
+W:	https://linuxtv.org
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/i2c/tea6420*
 
 TEAM DRIVER
@@ -16507,18 +16528,18 @@
 M:	Jens Wiklander <jens.wiklander@linaro.org>
 L:	tee-dev@lists.linaro.org
 S:	Maintained
+F:	Documentation/tee.txt
+F:	drivers/tee/
 F:	include/linux/tee_drv.h
 F:	include/uapi/linux/tee.h
-F:	drivers/tee/
-F:	Documentation/tee.txt
 
 TEGRA ARCHITECTURE SUPPORT
 M:	Thierry Reding <thierry.reding@gmail.com>
 M:	Jonathan Hunter <jonathanh@nvidia.com>
 L:	linux-tegra@vger.kernel.org
+S:	Supported
 Q:	http://patchwork.ozlabs.org/project/linux-tegra/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git
-S:	Supported
 N:	[^a-z]tegra
 
 TEGRA CLOCK DRIVER
@@ -16583,62 +16604,69 @@
 S:	Supported
 F:	drivers/net/ethernet/tehuti/*
 
-Telecom Clock Driver for MCPL0010
+TELECOM CLOCK DRIVER FOR MCPL0010
 M:	Mark Gross <mark.gross@intel.com>
 S:	Supported
 F:	drivers/char/tlclk.c
 
+TEMPO SEMICONDUCTOR DRIVERS
+M:	Steven Eckhoff <steven.eckhoff.opensource@gmail.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/sound/tscs*.txt
+F:	sound/soc/codecs/tscs*.c
+F:	sound/soc/codecs/tscs*.h
+
 TENSILICA XTENSA PORT (xtensa)
 M:	Chris Zankel <chris@zankel.net>
 M:	Max Filippov <jcmvbkbc@gmail.com>
 L:	linux-xtensa@linux-xtensa.org
-T:	git git://github.com/czankel/xtensa-linux.git
 S:	Maintained
+T:	git git://github.com/czankel/xtensa-linux.git
 F:	arch/xtensa/
 F:	drivers/irqchip/irq-xtensa-*
 
-Texas Instruments' System Control Interface (TISCI) Protocol Driver
+TEXAS INSTRUMENTS ASoC DRIVERS
+M:	Peter Ujfalusi <peter.ujfalusi@ti.com>
+L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
+S:	Maintained
+F:	sound/soc/ti/
+
+TEXAS INSTRUMENTS' DAC7612 DAC DRIVER
+M:	Ricardo Ribalda <ricardo@ribalda.com>
+L:	linux-iio@vger.kernel.org
+S:	Supported
+F:	Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
+F:	drivers/iio/dac/ti-dac7612.c
+
+TEXAS INSTRUMENTS' SYSTEM CONTROL INTERFACE (TISCI) PROTOCOL DRIVER
 M:	Nishanth Menon <nm@ti.com>
 M:	Tero Kristo <t-kristo@ti.com>
 M:	Santosh Shilimkar <ssantosh@kernel.org>
 L:	linux-arm-kernel@lists.infradead.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
-F:	drivers/firmware/ti_sci*
-F:	include/linux/soc/ti/ti_sci_protocol.h
+F:	Documentation/devicetree/bindings/clock/ti,sci-clk.txt
+F:	Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.txt
+F:	Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt
+F:	Documentation/devicetree/bindings/reset/ti,sci-reset.txt
 F:	Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
+F:	drivers/clk/keystone/sci-clk.c
+F:	drivers/firmware/ti_sci*
+F:	drivers/irqchip/irq-ti-sci-inta.c
+F:	drivers/irqchip/irq-ti-sci-intr.c
+F:	drivers/reset/reset-ti-sci.c
+F:	drivers/soc/ti/ti_sci_inta_msi.c
 F:	drivers/soc/ti/ti_sci_pm_domains.c
 F:	include/dt-bindings/soc/ti,sci_pm_domain.h
-F:	Documentation/devicetree/bindings/reset/ti,sci-reset.txt
-F:	Documentation/devicetree/bindings/clock/ti,sci-clk.txt
-F:	drivers/clk/keystone/sci-clk.c
-F:	drivers/reset/reset-ti-sci.c
-F:	Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt
-F:	Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.txt
-F:	drivers/irqchip/irq-ti-sci-intr.c
-F:	drivers/irqchip/irq-ti-sci-inta.c
 F:	include/linux/soc/ti/ti_sci_inta_msi.h
-F:	drivers/soc/ti/ti_sci_inta_msi.c
-
-Texas Instruments ASoC drivers
-M:	Peter Ujfalusi <peter.ujfalusi@ti.com>
-L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
-S:	Maintained
-F:	sound/soc/ti/
-
-Texas Instruments' DAC7612 DAC Driver
-M:	Ricardo Ribalda <ricardo@ribalda.com>
-L:	linux-iio@vger.kernel.org
-S:	Supported
-F:	drivers/iio/dac/ti-dac7612.c
-F:	Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
+F:	include/linux/soc/ti/ti_sci_protocol.h
 
 THANKO'S RAREMONO AM/FM/SW RADIO RECEIVER USB DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
-W:	https://linuxtv.org
 S:	Maintained
+W:	https://linuxtv.org
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/radio/radio-raremono.c
 
 THERMAL
@@ -16646,14 +16674,23 @@
 M:	Daniel Lezcano <daniel.lezcano@linaro.org>
 R:	Amit Kucheria <amit.kucheria@verdurent.com>
 L:	linux-pm@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git
-Q:	https://patchwork.kernel.org/project/linux-pm/list/
 S:	Supported
+Q:	https://patchwork.kernel.org/project/linux-pm/list/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git
+F:	Documentation/devicetree/bindings/thermal/
 F:	drivers/thermal/
+F:	include/linux/cpu_cooling.h
 F:	include/linux/thermal.h
 F:	include/uapi/linux/thermal.h
-F:	include/linux/cpu_cooling.h
-F:	Documentation/devicetree/bindings/thermal/
+
+THERMAL DRIVER FOR AMLOGIC SOCS
+M:	Guillaume La Roque <glaroque@baylibre.com>
+L:	linux-pm@vger.kernel.org
+L:	linux-amlogic@lists.infradead.org
+S:	Supported
+W:	http://linux-meson.com/
+F:	Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
+F:	drivers/thermal/amlogic_thermal.c
 
 THERMAL/CPU_COOLING
 M:	Amit Daniel Kachhap <amit.kachhap@gmail.com>
@@ -16668,15 +16705,6 @@
 F:	drivers/thermal/cpuidle_cooling.c
 F:	include/linux/cpu_cooling.h
 
-THERMAL DRIVER FOR AMLOGIC SOCS
-M:	Guillaume La Roque <glaroque@baylibre.com>
-L:	linux-pm@vger.kernel.org
-L:	linux-amlogic@lists.infradead.org
-W:	http://linux-meson.com/
-S:	Supported
-F:	drivers/thermal/amlogic_thermal.c
-F:	Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
-
 THINKPAD ACPI EXTRAS DRIVER
 M:	Henrique de Moraes Holschuh <ibm-acpi@hmh.eng.br>
 L:	ibm-acpi-devel@lists.sourceforge.net
@@ -16715,10 +16743,10 @@
 TI AM437X VPFE DRIVER
 M:	"Lad, Prabhakar" <prabhakar.csengg@gmail.com>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/mhadli/v4l-dvb-davinci_devices.git
-S:	Maintained
 F:	drivers/media/platform/am437x/
 
 TI BANDGAP AND THERMAL DRIVER
@@ -16731,9 +16759,9 @@
 
 TI BQ27XXX POWER SUPPLY DRIVER
 R:	Andrew F. Davis <afd@ti.com>
-F:	include/linux/power/bq27xxx_battery.h
 F:	drivers/power/supply/bq27xxx_battery.c
 F:	drivers/power/supply/bq27xxx_battery_i2c.c
+F:	include/linux/power/bq27xxx_battery.h
 
 TI CDCE706 CLOCK DRIVER
 M:	Max Filippov <jcmvbkbc@gmail.com>
@@ -16751,12 +16779,12 @@
 M:	Sekhar Nori <nsekhar@ti.com>
 R:	Bartosz Golaszewski <bgolaszewski@baylibre.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci.git
 S:	Supported
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci.git
 F:	Documentation/devicetree/bindings/i2c/i2c-davinci.txt
+F:	arch/arm/boot/dts/da850*
 F:	arch/arm/mach-davinci/
 F:	drivers/i2c/busses/i2c-davinci.c
-F:	arch/arm/boot/dts/da850*
 
 TI DAVINCI SERIES CLOCK DRIVER
 M:	David Lechner <david@lechnology.com>
@@ -16775,10 +16803,10 @@
 TI DAVINCI SERIES MEDIA DRIVER
 M:	"Lad, Prabhakar" <prabhakar.csengg@gmail.com>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/mhadli/v4l-dvb-davinci_devices.git
-S:	Maintained
 F:	drivers/media/platform/davinci/
 F:	include/media/davinci/
 
@@ -16810,16 +16838,16 @@
 L:	linux-kernel@vger.kernel.org
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-F:	drivers/soc/ti/*
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone.git
+F:	drivers/soc/ti/*
 
 TI LM49xxx FAMILY ASoC CODEC DRIVERS
 M:	M R Swami Reddy <mr.swami.reddy@ti.com>
 M:	Vishwas A Deshpande <vishwas.a.deshpande@ti.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 S:	Maintained
-F:	sound/soc/codecs/lm49453*
 F:	sound/soc/codecs/isabelle*
+F:	sound/soc/codecs/lm49453*
 
 TI LP855x BACKLIGHT DRIVER
 M:	Milo Kim <milo.kim@ti.com>
@@ -16876,8 +16904,8 @@
 L:	linux-wireless@vger.kernel.org
 L:	linux-nfc@lists.01.org (moderated for non-subscribers)
 S:	Supported
-F:	drivers/nfc/trf7970a.c
 F:	Documentation/devicetree/bindings/net/nfc/trf7970a.txt
+F:	drivers/nfc/trf7970a.c
 
 TI TWL4030 SERIES SOC CODEC DRIVER
 M:	Peter Ujfalusi <peter.ujfalusi@ti.com>
@@ -16897,10 +16925,10 @@
 
 TI WILINK WIRELESS DRIVERS
 L:	linux-wireless@vger.kernel.org
+S:	Orphan
 W:	http://wireless.kernel.org/en/users/Drivers/wl12xx
 W:	http://wireless.kernel.org/en/users/Drivers/wl1251
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx.git
-S:	Orphan
 F:	drivers/net/wireless/ti/
 F:	include/linux/wl12xx.h
 
@@ -16909,17 +16937,17 @@
 M:	Thomas Gleixner <tglx@linutronix.de>
 R:	Stephen Boyd <sboyd@kernel.org>
 L:	linux-kernel@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core
 S:	Supported
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core
 F:	include/linux/clocksource.h
 F:	include/linux/time.h
 F:	include/linux/timex.h
 F:	include/uapi/linux/time.h
 F:	include/uapi/linux/timex.h
-F:	kernel/time/clocksource.c
-F:	kernel/time/time*.c
 F:	kernel/time/alarmtimer.c
+F:	kernel/time/clocksource.c
 F:	kernel/time/ntp.c
+F:	kernel/time/time*.c
 F:	tools/testing/selftests/timers/
 
 TIPC NETWORK LAYER
@@ -16927,34 +16955,34 @@
 M:	Ying Xue <ying.xue@windriver.com>
 L:	netdev@vger.kernel.org (core kernel code)
 L:	tipc-discussion@lists.sourceforge.net (user apps, general discussion)
-W:	http://tipc.sourceforge.net/
 S:	Maintained
+W:	http://tipc.sourceforge.net/
 F:	include/uapi/linux/tipc*.h
 F:	net/tipc/
 
 TLAN NETWORK DRIVER
 M:	Samuel Chessman <chessman@tux.org>
 L:	tlan-devel@lists.sourceforge.net (subscribers-only)
-W:	http://sourceforge.net/projects/tlan/
 S:	Maintained
+W:	http://sourceforge.net/projects/tlan/
 F:	Documentation/networking/device_drivers/ti/tlan.txt
 F:	drivers/net/ethernet/ti/tlan.*
 
 TM6000 VIDEO4LINUX DRIVER
 M:	Mauro Carvalho Chehab <mchehab@kernel.org>
 L:	linux-media@vger.kernel.org
+S:	Odd fixes
 W:	https://linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
-S:	Odd fixes
-F:	drivers/media/usb/tm6000/
 F:	Documentation/media/v4l-drivers/tm6000*
+F:	drivers/media/usb/tm6000/
 
 TMIO/SDHI MMC DRIVER
 M:	Wolfram Sang <wsa+renesas@sang-engineering.com>
 L:	linux-mmc@vger.kernel.org
 S:	Supported
-F:	drivers/mmc/host/tmio_mmc*
 F:	drivers/mmc/host/renesas_sdhi*
+F:	drivers/mmc/host/tmio_mmc*
 F:	include/linux/mfd/tmio.h
 
 TMP401 HARDWARE MONITOR DRIVER
@@ -16985,8 +17013,8 @@
 L:	tomoyo-users-en@lists.osdn.me (subscribers-only, for users in English)
 L:	tomoyo-dev@lists.osdn.me (subscribers-only, for developers in Japanese)
 L:	tomoyo-users@lists.osdn.me (subscribers-only, for users in Japanese)
-W:	https://tomoyo.osdn.jp/
 S:	Maintained
+W:	https://tomoyo.osdn.jp/
 F:	security/tomoyo/
 
 TOPSTAR LAPTOP EXTRAS DRIVER
@@ -17003,10 +17031,10 @@
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git dev
 F:	Documentation/RCU/torture.txt
-F:	kernel/torture.c
-F:	kernel/rcu/rcutorture.c
-F:	kernel/rcu/rcuperf.c
 F:	kernel/locking/locktorture.c
+F:	kernel/rcu/rcuperf.c
+F:	kernel/rcu/rcutorture.c
+F:	kernel/torture.c
 
 TOSHIBA ACPI EXTRAS DRIVER
 M:	Azael Avalos <coproscefalo@gmail.com>
@@ -17028,8 +17056,8 @@
 
 TOSHIBA SMM DRIVER
 M:	Jonathan Buzzard <jonathan@buzzard.org.uk>
-W:	http://www.buzzard.org.uk/toshiba/
 S:	Maintained
+W:	http://www.buzzard.org.uk/toshiba/
 F:	drivers/char/toshiba.c
 F:	include/linux/toshiba.h
 F:	include/uapi/linux/toshiba.h
@@ -17052,17 +17080,17 @@
 M:	Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
 R:	Jason Gunthorpe <jgg@ziepe.ca>
 L:	linux-integrity@vger.kernel.org
-Q:	https://patchwork.kernel.org/project/linux-integrity/list/
-W:	https://kernsec.org/wiki/index.php/Linux_Kernel_Integrity
-T:	git git://git.infradead.org/users/jjs/linux-tpmdd.git
 S:	Maintained
+W:	https://kernsec.org/wiki/index.php/Linux_Kernel_Integrity
+Q:	https://patchwork.kernel.org/project/linux-integrity/list/
+T:	git git://git.infradead.org/users/jjs/linux-tpmdd.git
 F:	drivers/char/tpm/
 
 TRACING
 M:	Steven Rostedt <rostedt@goodmis.org>
 M:	Ingo Molnar <mingo@redhat.com>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git perf/core
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git perf/core
 F:	Documentation/trace/ftrace.rst
 F:	arch/*/*/*/ftrace.h
 F:	arch/*/kernel/ftrace.c
@@ -17077,28 +17105,21 @@
 M:	Ingo Molnar <mingo@kernel.org>
 R:	Karol Herbst <karolherbst@gmail.com>
 R:	Pekka Paalanen <ppaalanen@gmail.com>
-S:	Maintained
 L:	linux-kernel@vger.kernel.org
 L:	nouveau@lists.freedesktop.org
-F:	kernel/trace/trace_mmiotrace.c
-F:	include/linux/mmiotrace.h
+S:	Maintained
 F:	arch/x86/mm/kmmio.c
 F:	arch/x86/mm/mmio-mod.c
 F:	arch/x86/mm/testmmiotrace.c
+F:	include/linux/mmiotrace.h
+F:	kernel/trace/trace_mmiotrace.c
 
 TRIVIAL PATCHES
 M:	Jiri Kosina <trivial@kernel.org>
+S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial.git
-S:	Maintained
 K:	^Subject:.*(?i)trivial
 
-TEMPO SEMICONDUCTOR DRIVERS
-M:	Steven Eckhoff <steven.eckhoff.opensource@gmail.com>
-S:	Maintained
-F:	sound/soc/codecs/tscs*.c
-F:	sound/soc/codecs/tscs*.h
-F:	Documentation/devicetree/bindings/sound/tscs*.txt
-
 TTY LAYER
 M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 M:	Jiri Slaby <jslaby@suse.com>
@@ -17107,21 +17128,21 @@
 F:	Documentation/driver-api/serial/
 F:	drivers/tty/
 F:	drivers/tty/serial/serial_core.c
-F:	include/linux/serial_core.h
 F:	include/linux/serial.h
+F:	include/linux/serial_core.h
 F:	include/linux/tty.h
-F:	include/uapi/linux/serial_core.h
 F:	include/uapi/linux/serial.h
+F:	include/uapi/linux/serial_core.h
 F:	include/uapi/linux/tty.h
 
 TUA9001 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
-S:	Maintained
 F:	drivers/media/tuners/tua9001*
 
 TULIP NETWORK DRIVERS
@@ -17132,8 +17153,8 @@
 
 TUN/TAP driver
 M:	Maxim Krasnyansky <maxk@qti.qualcomm.com>
-W:	http://vtun.sourceforge.net/tun
 S:	Maintained
+W:	http://vtun.sourceforge.net/tun
 F:	Documentation/networking/tuntap.txt
 F:	arch/um/os-Linux/drivers/
 
@@ -17141,18 +17162,18 @@
 M:	"Maciej W. Rozycki" <macro@linux-mips.org>
 M:	Ralf Baechle <ralf@linux-mips.org>
 L:	linux-mips@vger.kernel.org
-Q:	http://patchwork.linux-mips.org/project/linux-mips/list/
 S:	Maintained
+Q:	http://patchwork.linux-mips.org/project/linux-mips/list/
 F:	drivers/tc/
 F:	include/linux/tc.h
 
 TURBOSTAT UTILITY
 M:	"Len Brown" <lenb@kernel.org>
 L:	linux-pm@vger.kernel.org
-B:	https://bugzilla.kernel.org
-Q:	https://patchwork.kernel.org/project/linux-pm/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux.git turbostat
 S:	Supported
+Q:	https://patchwork.kernel.org/project/linux-pm/list/
+B:	https://bugzilla.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux.git turbostat
 F:	tools/power/x86/turbostat/
 
 TW5864 VIDEO4LINUX DRIVER
@@ -17167,17 +17188,17 @@
 TW68 VIDEO4LINUX DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
-W:	https://linuxtv.org
 S:	Odd Fixes
+W:	https://linuxtv.org
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/pci/tw68/
 
 TW686X VIDEO4LINUX DRIVER
 M:	Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
-W:	http://linuxtv.org
 S:	Maintained
+W:	http://linuxtv.org
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/pci/tw686x/
 
 UACCE ACCELERATOR FRAMEWORK
@@ -17195,24 +17216,24 @@
 UBI FILE SYSTEM (UBIFS)
 M:	Richard Weinberger <richard@nod.at>
 L:	linux-mtd@lists.infradead.org
+S:	Supported
+W:	http://www.linux-mtd.infradead.org/doc/ubifs.html
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs.git next
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs.git fixes
-W:	http://www.linux-mtd.infradead.org/doc/ubifs.html
-S:	Supported
 F:	Documentation/filesystems/ubifs.rst
 F:	fs/ubifs/
 
 UCLINUX (M68KNOMMU AND COLDFIRE)
 M:	Greg Ungerer <gerg@linux-m68k.org>
-W:	http://www.linux-m68k.org/
-W:	http://www.uclinux.org/
 L:	linux-m68k@lists.linux-m68k.org
 L:	uclinux-dev@uclinux.org  (subscribers-only)
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu.git
 S:	Maintained
-F:	arch/m68k/coldfire/
-F:	arch/m68k/68*/
+W:	http://www.linux-m68k.org/
+W:	http://www.uclinux.org/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu.git
 F:	arch/m68k/*/*_no.*
+F:	arch/m68k/68*/
+F:	arch/m68k/coldfire/
 F:	arch/m68k/include/asm/*_no.*
 
 UDF FILESYSTEM
@@ -17255,21 +17276,21 @@
 
 UNICORE32 ARCHITECTURE
 M:	Guan Xuetao <gxt@pku.edu.cn>
-W:	http://mprc.pku.edu.cn/~guanxuetao/linux
 S:	Maintained
+W:	http://mprc.pku.edu.cn/~guanxuetao/linux
 T:	git git://github.com/gxt/linux.git
 F:	arch/unicore32/
 
 UNIFDEF
 M:	Tony Finch <dot@dotat.at>
-W:	http://dotat.at/prog/unifdef
 S:	Maintained
+W:	http://dotat.at/prog/unifdef
 F:	scripts/unifdef.c
 
 UNIFORM CDROM DRIVER
 M:	Jens Axboe <axboe@kernel.dk>
-W:	http://www.kernel.dk
 S:	Maintained
+W:	http://www.kernel.dk
 F:	Documentation/cdrom/
 F:	drivers/cdrom/cdrom.c
 F:	include/linux/cdrom.h
@@ -17279,16 +17300,16 @@
 M:	David Kershner <david.kershner@unisys.com>
 L:	sparmaintainer@unisys.com (Unisys internal)
 S:	Supported
-F:	include/linux/visorbus.h
-F:	drivers/visorbus/
 F:	drivers/staging/unisys/
+F:	drivers/visorbus/
+F:	include/linux/visorbus.h
 
 UNIVERSAL FLASH STORAGE HOST CONTROLLER DRIVER
 R:	Alim Akhtar <alim.akhtar@samsung.com>
 R:	Avri Altman <avri.altman@wdc.com>
 L:	linux-scsi@vger.kernel.org
 S:	Supported
-F:	Documentation/scsi/ufs.txt
+F:	Documentation/scsi/ufs.rst
 F:	drivers/scsi/ufs/
 
 UNIVERSAL FLASH STORAGE HOST CONTROLLER DRIVER DWC HOOKS
@@ -17306,11 +17327,11 @@
 
 UNSORTED BLOCK IMAGES (UBI)
 M:	Richard Weinberger <richard@nod.at>
-W:	http://www.linux-mtd.infradead.org/
 L:	linux-mtd@lists.infradead.org
+S:	Supported
+W:	http://www.linux-mtd.infradead.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs.git next
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs.git fixes
-S:	Supported
 F:	drivers/mtd/ubi/
 F:	include/linux/mtd/ubi.h
 F:	include/uapi/mtd/ubi-user.h
@@ -17318,8 +17339,8 @@
 USB "USBNET" DRIVER FRAMEWORK
 M:	Oliver Neukum <oneukum@suse.com>
 L:	netdev@vger.kernel.org
-W:	http://www.linux-usb.org/usbnet
 S:	Maintained
+W:	http://www.linux-usb.org/usbnet
 F:	drivers/net/usb/usbnet.c
 F:	include/linux/usb/usbnet.h
 
@@ -17371,8 +17392,8 @@
 USB DAVICOM DM9601 DRIVER
 M:	Peter Korsgaard <jacmet@sunsite.dk>
 L:	netdev@vger.kernel.org
-W:	http://www.linux-usb.org/usbnet
 S:	Maintained
+W:	http://www.linux-usb.org/usbnet
 F:	drivers/net/usb/dm9601.c
 
 USB EHCI DRIVER
@@ -17385,9 +17406,9 @@
 USB GADGET/PERIPHERAL SUBSYSTEM
 M:	Felipe Balbi <balbi@kernel.org>
 L:	linux-usb@vger.kernel.org
+S:	Maintained
 W:	http://www.linux-usb.org/gadget
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
-S:	Maintained
 F:	drivers/usb/gadget/
 F:	include/linux/usb/gadget*
 
@@ -17395,8 +17416,8 @@
 M:	Jiri Kosina <jikos@kernel.org>
 M:	Benjamin Tissoires <benjamin.tissoires@redhat.com>
 L:	linux-usb@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid.git
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid.git
 F:	Documentation/hid/hiddev.rst
 F:	drivers/hid/usbhid/
 
@@ -17440,8 +17461,8 @@
 USB MIDI DRIVER
 M:	Clemens Ladisch <clemens@ladisch.de>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
 F:	sound/usb/midi.*
 
 USB NETWORKING DRIVERS
@@ -17458,9 +17479,9 @@
 
 USB OTG FSM (Finite State Machine)
 M:	Peter Chen <Peter.Chen@nxp.com>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb.git
 L:	linux-usb@vger.kernel.org
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb.git
 F:	drivers/usb/common/usb-otg-fsm.c
 
 USB OVER IP DRIVER
@@ -17471,23 +17492,23 @@
 S:	Maintained
 F:	Documentation/usb/usbip_protocol.rst
 F:	drivers/usb/usbip/
-F:	tools/usb/usbip/
 F:	tools/testing/selftests/drivers/usb/usbip/
+F:	tools/usb/usbip/
 
 USB PEGASUS DRIVER
 M:	Petko Manolov <petkan@nucleusys.com>
 L:	linux-usb@vger.kernel.org
 L:	netdev@vger.kernel.org
-T:	git git://github.com/petkan/pegasus.git
-W:	https://github.com/petkan/pegasus
 S:	Maintained
+W:	https://github.com/petkan/pegasus
+T:	git git://github.com/petkan/pegasus.git
 F:	drivers/net/usb/pegasus.*
 
 USB PHY LAYER
 M:	Felipe Balbi <balbi@kernel.org>
 L:	linux-usb@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
 F:	drivers/usb/phy/
 
 USB PRINTER DRIVER (usblp)
@@ -17507,16 +17528,16 @@
 M:	Petko Manolov <petkan@nucleusys.com>
 L:	linux-usb@vger.kernel.org
 L:	netdev@vger.kernel.org
-T:	git git://github.com/petkan/rtl8150.git
-W:	https://github.com/petkan/rtl8150
 S:	Maintained
+W:	https://github.com/petkan/rtl8150
+T:	git git://github.com/petkan/rtl8150.git
 F:	drivers/net/usb/rtl8150.c
 
 USB SERIAL SUBSYSTEM
 M:	Johan Hovold <johan@kernel.org>
 L:	linux-usb@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial.git
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial.git
 F:	Documentation/usb/usb-serial.rst
 F:	drivers/usb/serial/
 F:	include/linux/usb/serial.h
@@ -17537,9 +17558,9 @@
 USB SUBSYSTEM
 M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 L:	linux-usb@vger.kernel.org
+S:	Supported
 W:	http://www.linux-usb.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
-S:	Supported
 F:	Documentation/devicetree/bindings/usb/
 F:	Documentation/usb/
 F:	drivers/usb/
@@ -17586,18 +17607,18 @@
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	linux-uvc-devel@lists.sourceforge.net (subscribers-only)
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
-W:	http://www.ideasonboard.org/uvc/
 S:	Maintained
+W:	http://www.ideasonboard.org/uvc/
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/usb/uvc/
 F:	include/uapi/linux/uvcvideo.h
 
 USB VISION DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
-W:	https://linuxtv.org
 S:	Odd Fixes
+W:	https://linuxtv.org
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/staging/media/usbvision/
 
 USB WEBCAM GADGET
@@ -17618,22 +17639,22 @@
 M:	Mathias Nyman <mathias.nyman@intel.com>
 L:	linux-usb@vger.kernel.org
 S:	Supported
-F:	drivers/usb/host/xhci*
 F:	drivers/usb/host/pci-quirks*
+F:	drivers/usb/host/xhci*
 
 USB ZD1201 DRIVER
 L:	linux-wireless@vger.kernel.org
-W:	http://linux-lc100020.sourceforge.net
 S:	Orphan
+W:	http://linux-lc100020.sourceforge.net
 F:	drivers/net/wireless/zydas/zd1201.*
 
 USB ZR364XX DRIVER
 M:	Antoine Jacquet <royale@zerezo.com>
 L:	linux-usb@vger.kernel.org
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
-W:	http://royale.zerezo.com/zr364xx/
 S:	Maintained
+W:	http://royale.zerezo.com/zr364xx/
+T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/media/v4l-drivers/zr364xx*
 F:	drivers/media/usb/zr364xx/
 
@@ -17642,10 +17663,10 @@
 M:	Richard Weinberger <richard@nod.at>
 M:	Anton Ivanov <anton.ivanov@cambridgegreys.com>
 L:	linux-um@lists.infradead.org
+S:	Maintained
 W:	http://user-mode-linux.sourceforge.net
 Q:	https://patchwork.ozlabs.org/project/linux-um/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml.git
-S:	Maintained
 F:	Documentation/virt/uml/
 F:	arch/um/
 F:	arch/x86/um/
@@ -17654,16 +17675,16 @@
 USERSPACE COPYIN/COPYOUT (UIOVEC)
 M:	Alexander Viro <viro@zeniv.linux.org.uk>
 S:	Maintained
-F:	lib/iov_iter.c
 F:	include/linux/uio.h
+F:	lib/iov_iter.c
 
 USERSPACE DMA BUFFER DRIVER
 M:	Gerd Hoffmann <kraxel@redhat.com>
-S:	Maintained
 L:	dri-devel@lists.freedesktop.org
+S:	Maintained
+T:	git git://anongit.freedesktop.org/drm/drm-misc
 F:	drivers/dma-buf/udmabuf.c
 F:	include/uapi/linux/udmabuf.h
-T:	git git://anongit.freedesktop.org/drm/drm-misc
 
 USERSPACE I/O (UIO)
 M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
@@ -17676,29 +17697,36 @@
 UTIL-LINUX PACKAGE
 M:	Karel Zak <kzak@redhat.com>
 L:	util-linux@vger.kernel.org
+S:	Maintained
 W:	http://en.wikipedia.org/wiki/Util-linux
 T:	git git://git.kernel.org/pub/scm/utils/util-linux/util-linux.git
-S:	Maintained
 
 UUID HELPERS
 M:	Christoph Hellwig <hch@lst.de>
 R:	Andy Shevchenko <andriy.shevchenko@linux.intel.com>
 L:	linux-kernel@vger.kernel.org
+S:	Maintained
 T:	git git://git.infradead.org/users/hch/uuid.git
-F:	lib/uuid.c
-F:	lib/test_uuid.c
 F:	include/linux/uuid.h
 F:	include/uapi/linux/uuid.h
-S:	Maintained
+F:	lib/test_uuid.c
+F:	lib/uuid.c
 
 UVESAFB DRIVER
 M:	Michal Januszewski <spock@gentoo.org>
 L:	linux-fbdev@vger.kernel.org
-W:	https://github.com/mjanusz/v86d
 S:	Maintained
+W:	https://github.com/mjanusz/v86d
 F:	Documentation/fb/uvesafb.rst
 F:	drivers/video/fbdev/uvesafb.*
 
+Ux500 CLOCK DRIVERS
+M:	Ulf Hansson <ulf.hansson@linaro.org>
+L:	linux-clk@vger.kernel.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	drivers/clk/ux500/
+
 VF610 NAND DRIVER
 M:	Stefan Agner <stefan@agner.ch>
 L:	linux-mtd@lists.infradead.org
@@ -17715,8 +17743,8 @@
 M:	Alex Williamson <alex.williamson@redhat.com>
 R:	Cornelia Huck <cohuck@redhat.com>
 L:	kvm@vger.kernel.org
-T:	git git://github.com/awilliam/linux-vfio.git
 S:	Maintained
+T:	git git://github.com/awilliam/linux-vfio.git
 F:	Documentation/driver-api/vfio.rst
 F:	drivers/vfio/
 F:	include/linux/vfio.h
@@ -17740,10 +17768,10 @@
 VGA_SWITCHEROO
 R:	Lukas Wunner <lukas@wunner.de>
 S:	Maintained
+T:	git git://anongit.freedesktop.org/drm/drm-misc
 F:	Documentation/gpu/vga-switcheroo.rst
 F:	drivers/gpu/vga/vga_switcheroo.c
 F:	include/linux/vga_switcheroo.h
-T:	git git://anongit.freedesktop.org/drm/drm-misc
 
 VIA RHINE NETWORK DRIVER
 S:	Orphan
@@ -17759,10 +17787,10 @@
 M:	Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
 L:	linux-fbdev@vger.kernel.org
 S:	Maintained
+F:	drivers/video/fbdev/via/
 F:	include/linux/via-core.h
 F:	include/linux/via-gpio.h
 F:	include/linux/via_i2c.h
-F:	drivers/video/fbdev/via/
 
 VIA VELOCITY NETWORK DRIVER
 M:	Francois Romieu <romieu@fr.zoreil.com>
@@ -17773,23 +17801,23 @@
 VICODEC VIRTUAL CODEC DRIVER
 M:	Hans Verkuil <hverkuil-cisco@xs4all.nl>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
+S:	Maintained
 W:	https://linuxtv.org
-S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/platform/vicodec/*
 
-VIDEO MULTIPLEXER DRIVER
-M:	Philipp Zabel <p.zabel@pengutronix.de>
-L:	linux-media@vger.kernel.org
-S:	Maintained
-F:	drivers/media/platform/video-mux.c
-
 VIDEO I2C POLLING DRIVER
 M:	Matt Ranostay <matt.ranostay@konsulko.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 F:	drivers/media/i2c/video-i2c.c
 
+VIDEO MULTIPLEXER DRIVER
+M:	Philipp Zabel <p.zabel@pengutronix.de>
+L:	linux-media@vger.kernel.org
+S:	Maintained
+F:	drivers/media/platform/video-mux.c
+
 VIDEOBUF2 FRAMEWORK
 M:	Pawel Osciak <pawel@osciak.com>
 M:	Marek Szyprowski <m.szyprowski@samsung.com>
@@ -17804,9 +17832,9 @@
 M:	Helen Koike <helen.koike@collabora.com>
 R:	Shuah Khan <skhan@linuxfoundation.org>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
-W:	https://linuxtv.org
 S:	Maintained
+W:	https://linuxtv.org
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/platform/vimc/*
 
 VIRT LIB
@@ -17823,19 +17851,32 @@
 L:	virtualization@lists.linux-foundation.org
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	include/linux/virtio_vsock.h
-F:	include/uapi/linux/virtio_vsock.h
-F:	include/uapi/linux/vsockmon.h
-F:	include/uapi/linux/vm_sockets_diag.h
-F:	net/vmw_vsock/diag.c
-F:	net/vmw_vsock/af_vsock_tap.c
-F:	net/vmw_vsock/virtio_transport_common.c
-F:	net/vmw_vsock/virtio_transport.c
-F:	net/vmw_vsock/vsock_loopback.c
 F:	drivers/net/vsockmon.c
 F:	drivers/vhost/vsock.c
+F:	include/linux/virtio_vsock.h
+F:	include/uapi/linux/virtio_vsock.h
+F:	include/uapi/linux/vm_sockets_diag.h
+F:	include/uapi/linux/vsockmon.h
+F:	net/vmw_vsock/af_vsock_tap.c
+F:	net/vmw_vsock/diag.c
+F:	net/vmw_vsock/virtio_transport.c
+F:	net/vmw_vsock/virtio_transport_common.c
+F:	net/vmw_vsock/vsock_loopback.c
 F:	tools/testing/vsock/
 
+VIRTIO BLOCK AND SCSI DRIVERS
+M:	"Michael S. Tsirkin" <mst@redhat.com>
+M:	Jason Wang <jasowang@redhat.com>
+R:	Paolo Bonzini <pbonzini@redhat.com>
+R:	Stefan Hajnoczi <stefanha@redhat.com>
+L:	virtualization@lists.linux-foundation.org
+S:	Maintained
+F:	drivers/block/virtio_blk.c
+F:	drivers/scsi/virtio_scsi.c
+F:	drivers/vhost/scsi.c
+F:	include/uapi/linux/virtio_blk.h
+F:	include/uapi/linux/virtio_scsi.h
+
 VIRTIO CONSOLE DRIVER
 M:	Amit Shah <amit@kernel.org>
 L:	virtualization@lists.linux-foundation.org
@@ -17850,27 +17891,16 @@
 L:	virtualization@lists.linux-foundation.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/virtio/
-F:	drivers/virtio/
-F:	tools/virtio/
-F:	drivers/net/virtio_net.c
 F:	drivers/block/virtio_blk.c
+F:	drivers/crypto/virtio/
+F:	drivers/net/virtio_net.c
+F:	drivers/vdpa/
+F:	drivers/virtio/
+F:	include/linux/vdpa.h
 F:	include/linux/virtio*.h
 F:	include/uapi/linux/virtio_*.h
-F:	drivers/crypto/virtio/
 F:	mm/balloon_compaction.c
-
-VIRTIO BLOCK AND SCSI DRIVERS
-M:	"Michael S. Tsirkin" <mst@redhat.com>
-M:	Jason Wang <jasowang@redhat.com>
-R:	Paolo Bonzini <pbonzini@redhat.com>
-R:	Stefan Hajnoczi <stefanha@redhat.com>
-L:	virtualization@lists.linux-foundation.org
-S:	Maintained
-F:	drivers/block/virtio_blk.c
-F:	drivers/scsi/virtio_scsi.c
-F:	include/uapi/linux/virtio_blk.h
-F:	include/uapi/linux/virtio_scsi.h
-F:	drivers/vhost/scsi.c
+F:	tools/virtio/
 
 VIRTIO CRYPTO DRIVER
 M:	Gonglei <arei.gonglei@huawei.com>
@@ -17887,8 +17917,8 @@
 L:	virtualization@lists.linux-foundation.org
 L:	kvm@vger.kernel.org
 S:	Supported
-F:	drivers/s390/virtio/
 F:	arch/s390/include/uapi/asm/virtio-ccw.h
+F:	drivers/s390/virtio/
 
 VIRTIO FILE SYSTEM
 M:	Vivek Goyal <vgoyal@redhat.com>
@@ -17896,19 +17926,19 @@
 M:	Miklos Szeredi <miklos@szeredi.hu>
 L:	virtualization@lists.linux-foundation.org
 L:	linux-fsdevel@vger.kernel.org
-W:	https://virtio-fs.gitlab.io/
 S:	Supported
+W:	https://virtio-fs.gitlab.io/
+F:	Documentation/filesystems/virtiofs.rst
 F:	fs/fuse/virtio_fs.c
 F:	include/uapi/linux/virtio_fs.h
-F:	Documentation/filesystems/virtiofs.rst
 
 VIRTIO GPU DRIVER
 M:	David Airlie <airlied@linux.ie>
 M:	Gerd Hoffmann <kraxel@redhat.com>
 L:	dri-devel@lists.freedesktop.org
 L:	virtualization@lists.linux-foundation.org
-T:	git git://anongit.freedesktop.org/drm/drm-misc
 S:	Maintained
+T:	git git://anongit.freedesktop.org/drm/drm-misc
 F:	drivers/gpu/drm/virtio/
 F:	include/uapi/linux/virtio_gpu.h
 
@@ -17918,9 +17948,10 @@
 L:	kvm@vger.kernel.org
 L:	virtualization@lists.linux-foundation.org
 L:	netdev@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost.git
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost.git
 F:	drivers/vhost/
+F:	include/linux/vhost_iotlb.h
 F:	include/uapi/linux/vhost.h
 
 VIRTIO INPUT DRIVER
@@ -17941,9 +17972,9 @@
 M:	Arnd Bergmann <arnd@arndb.de>
 M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 S:	Maintained
+F:	drivers/virt/vboxguest/
 F:	include/linux/vbox_utils.h
 F:	include/uapi/linux/vbox*.h
-F:	drivers/virt/vboxguest/
 
 VIRTUAL BOX SHARED FOLDER VFS DRIVER
 M:	Hans de Goede <hdegoede@redhat.com>
@@ -17968,9 +17999,9 @@
 VIVID VIRTUAL VIDEO DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
-W:	https://linuxtv.org
 S:	Maintained
+W:	https://linuxtv.org
+T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/platform/vivid/*
 
 VLYNQ BUS
@@ -18004,15 +18035,8 @@
 M:	"VMware, Inc." <pv-drivers@vmware.com>
 L:	virtualization@lists.linux-foundation.org
 S:	Supported
-F:	arch/x86/kernel/cpu/vmware.c
 F:	arch/x86/include/asm/vmware.h
-
-VMWARE VIRTUAL PTP CLOCK DRIVER
-M:	Vivek Thampi <vithampi@vmware.com>
-M:	"VMware, Inc." <pv-drivers@vmware.com>
-L:	netdev@vger.kernel.org
-S:	Supported
-F:	drivers/ptp/ptp_vmw.c
+F:	arch/x86/kernel/cpu/vmware.c
 
 VMWARE PVRDMA DRIVER
 M:	Adit Ranadive <aditr@vmware.com>
@@ -18029,6 +18053,13 @@
 F:	drivers/scsi/vmw_pvscsi.c
 F:	drivers/scsi/vmw_pvscsi.h
 
+VMWARE VIRTUAL PTP CLOCK DRIVER
+M:	Vivek Thampi <vithampi@vmware.com>
+M:	"VMware, Inc." <pv-drivers@vmware.com>
+L:	netdev@vger.kernel.org
+S:	Supported
+F:	drivers/ptp/ptp_vmw.c
+
 VMWARE VMMOUSE SUBDRIVER
 M:	"VMware Graphics" <linux-graphics-maintainer@vmware.com>
 M:	"VMware, Inc." <pv-drivers@vmware.com>
@@ -18054,9 +18085,9 @@
 M:	Liam Girdwood <lgirdwood@gmail.com>
 M:	Mark Brown <broonie@kernel.org>
 L:	linux-kernel@vger.kernel.org
+S:	Supported
 W:	http://www.slimlogic.co.uk/?p=48
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
-S:	Supported
 F:	Documentation/devicetree/bindings/regulator/
 F:	Documentation/power/regulator/
 F:	drivers/regulator/
@@ -18069,8 +18100,8 @@
 M:	Shrijeet Mukherjee <shrijeet@gmail.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/vrf.c
 F:	Documentation/networking/vrf.txt
+F:	drivers/net/vrf.c
 
 VSPRINTF
 M:	Petr Mladek <pmladek@suse.com>
@@ -18078,11 +18109,11 @@
 M:	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
 R:	Andy Shevchenko <andriy.shevchenko@linux.intel.com>
 R:	Rasmus Villemoes <linux@rasmusvillemoes.dk>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk.git
 S:	Maintained
-F:	lib/vsprintf.c
-F:	lib/test_printf.c
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk.git
 F:	Documentation/core-api/printk-formats.rst
+F:	lib/test_printf.c
+F:	lib/vsprintf.c
 
 VT1211 HARDWARE MONITOR DRIVER
 M:	Juerg Haefliger <juergh@gmail.com>
@@ -18146,9 +18177,9 @@
 M:	Wim Van Sebroeck <wim@linux-watchdog.org>
 M:	Guenter Roeck <linux@roeck-us.net>
 L:	linux-watchdog@vger.kernel.org
+S:	Maintained
 W:	http://www.linux-watchdog.org/
 T:	git git://www.linux-watchdog.org/linux-watchdog.git
-S:	Maintained
 F:	Documentation/devicetree/bindings/watchdog/
 F:	Documentation/watchdog/
 F:	drivers/watchdog/
@@ -18198,11 +18229,6 @@
 S:	Maintained
 F:	drivers/media/rc/winbond-cir.c
 
-RCMM REMOTE CONTROLS DECODER
-M:	Patrick Lerda <patrick9876@free.fr>
-S:	Maintained
-F:	drivers/media/rc/ir-rcmm-decoder.c
-
 WINSYSTEMS EBC-C384 WATCHDOG DRIVER
 M:	William Breathitt Gray <vilhelm.gray@gmail.com>
 L:	linux-watchdog@vger.kernel.org
@@ -18217,11 +18243,11 @@
 
 WIREGUARD SECURE NETWORK TUNNEL
 M:	Jason A. Donenfeld <Jason@zx2c4.com>
+L:	wireguard@lists.zx2c4.com
+L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/wireguard/
 F:	tools/testing/selftests/wireguard/
-L:	wireguard@lists.zx2c4.com
-L:	netdev@vger.kernel.org
 
 WISTRON LAPTOP BUTTON DRIVER
 M:	Miloslav Trmac <mitr@volny.cz>
@@ -18235,32 +18261,32 @@
 
 WOLFSON MICROELECTRONICS DRIVERS
 L:	patches@opensource.cirrus.com
-T:	git https://github.com/CirrusLogic/linux-drivers.git
-W:	https://github.com/CirrusLogic/linux-drivers/wiki
 S:	Supported
-F:	Documentation/hwmon/wm83??.rst
+W:	https://github.com/CirrusLogic/linux-drivers/wiki
+T:	git https://github.com/CirrusLogic/linux-drivers.git
 F:	Documentation/devicetree/bindings/extcon/extcon-arizona.txt
-F:	Documentation/devicetree/bindings/regulator/arizona-regulator.txt
 F:	Documentation/devicetree/bindings/mfd/arizona.txt
 F:	Documentation/devicetree/bindings/mfd/wm831x.txt
+F:	Documentation/devicetree/bindings/regulator/arizona-regulator.txt
 F:	Documentation/devicetree/bindings/sound/wlf,arizona.txt
+F:	Documentation/hwmon/wm83??.rst
 F:	arch/arm/mach-s3c64xx/mach-crag6410*
 F:	drivers/clk/clk-wm83*.c
 F:	drivers/extcon/extcon-arizona.c
-F:	drivers/leds/leds-wm83*.c
 F:	drivers/gpio/gpio-*wm*.c
 F:	drivers/gpio/gpio-arizona.c
 F:	drivers/hwmon/wm83??-hwmon.c
 F:	drivers/input/misc/wm831x-on.c
 F:	drivers/input/touchscreen/wm831x-ts.c
 F:	drivers/input/touchscreen/wm97*.c
+F:	drivers/leds/leds-wm83*.c
 F:	drivers/mfd/arizona*
-F:	drivers/mfd/wm*.c
 F:	drivers/mfd/cs47l24*
+F:	drivers/mfd/wm*.c
 F:	drivers/power/supply/wm83*.c
-F:	drivers/rtc/rtc-wm83*.c
-F:	drivers/regulator/wm8*.c
 F:	drivers/regulator/arizona*
+F:	drivers/regulator/wm8*.c
+F:	drivers/rtc/rtc-wm83*.c
 F:	drivers/video/backlight/wm83*_bl.c
 F:	drivers/watchdog/wm83*_wdt.c
 F:	include/linux/mfd/arizona/
@@ -18271,17 +18297,17 @@
 F:	include/linux/wm97xx.h
 F:	include/sound/wm????.h
 F:	sound/soc/codecs/arizona.?
-F:	sound/soc/codecs/wm*
 F:	sound/soc/codecs/cs47l24*
+F:	sound/soc/codecs/wm*
 
 WORKQUEUE
 M:	Tejun Heo <tj@kernel.org>
 R:	Lai Jiangshan <jiangshanlai@gmail.com>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq.git
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq.git
+F:	Documentation/core-api/workqueue.rst
 F:	include/linux/workqueue.h
 F:	kernel/workqueue.c
-F:	Documentation/core-api/workqueue.rst
 
 X-POWERS AXP288 PMIC DRIVERS
 M:	Hans de Goede <hdegoede@redhat.com>
@@ -18307,11 +18333,11 @@
 M:	Thomas Gleixner <tglx@linutronix.de>
 M:	Ingo Molnar <mingo@redhat.com>
 M:	Borislav Petkov <bp@alien8.de>
-R:	"H. Peter Anvin" <hpa@zytor.com>
 M:	x86@kernel.org
+R:	"H. Peter Anvin" <hpa@zytor.com>
 L:	linux-kernel@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/core
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/core
 F:	Documentation/devicetree/bindings/x86/
 F:	Documentation/x86/
 F:	arch/x86/
@@ -18319,8 +18345,8 @@
 X86 ENTRY CODE
 M:	Andy Lutomirski <luto@kernel.org>
 L:	linux-kernel@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/asm
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/asm
 F:	arch/x86/entry/
 
 X86 MCE INFRASTRUCTURE
@@ -18340,8 +18366,8 @@
 M:	Andy Lutomirski <luto@kernel.org>
 M:	Peter Zijlstra <peterz@infradead.org>
 L:	linux-kernel@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/mm
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/mm
 F:	arch/x86/mm/
 
 X86 PLATFORM DRIVERS
@@ -18358,15 +18384,15 @@
 R:	Andy Shevchenko <andy@infradead.org>
 L:	platform-driver-x86@vger.kernel.org
 L:	x86@kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/core
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/core
 F:	arch/x86/platform
 
 X86 VDSO
 M:	Andy Lutomirski <luto@kernel.org>
 L:	linux-kernel@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/vdso
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/vdso
 F:	arch/x86/entry/vdso/
 
 XARRAY
@@ -18374,24 +18400,24 @@
 L:	linux-fsdevel@vger.kernel.org
 S:	Supported
 F:	Documentation/core-api/xarray.rst
-F:	lib/idr.c
-F:	lib/xarray.c
 F:	include/linux/idr.h
 F:	include/linux/xarray.h
+F:	lib/idr.c
+F:	lib/xarray.c
 F:	tools/testing/radix-tree
 
 XBOX DVD IR REMOTE
 M:	Benjamin Valentin <benpicco@googlemail.com>
 S:	Maintained
-F:	drivers/media/rc/xbox_remote.c
 F:	drivers/media/rc/keymaps/rc-xbox-dvd.c
+F:	drivers/media/rc/xbox_remote.c
 
 XC2028/3028 TUNER DRIVER
 M:	Mauro Carvalho Chehab <mchehab@kernel.org>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
-S:	Maintained
 F:	drivers/media/tuners/tuner-xc2028.*
 
 XDP (eXpress Data Path)
@@ -18404,13 +18430,13 @@
 L:	netdev@vger.kernel.org
 L:	bpf@vger.kernel.org
 S:	Supported
-F:	net/core/xdp.c
 F:	include/net/xdp.h
-F:	kernel/bpf/devmap.c
-F:	kernel/bpf/cpumap.c
 F:	include/trace/events/xdp.h
-K:	xdp
+F:	kernel/bpf/cpumap.c
+F:	kernel/bpf/devmap.c
+F:	net/core/xdp.c
 N:	xdp
+K:	xdp
 
 XDP SOCKETS (AF_XDP)
 M:	Björn Töpel <bjorn.topel@intel.com>
@@ -18427,40 +18453,40 @@
 M:	Roger Pau Monné <roger.pau@citrix.com>
 L:	xen-devel@lists.xenproject.org (moderated for non-subscribers)
 S:	Supported
-F:	drivers/block/xen-blkback/*
 F:	drivers/block/xen*
+F:	drivers/block/xen-blkback/*
 
 XEN HYPERVISOR ARM
 M:	Stefano Stabellini <sstabellini@kernel.org>
 L:	xen-devel@lists.xenproject.org (moderated for non-subscribers)
 S:	Maintained
-F:	arch/arm/xen/
 F:	arch/arm/include/asm/xen/
+F:	arch/arm/xen/
 
 XEN HYPERVISOR ARM64
 M:	Stefano Stabellini <sstabellini@kernel.org>
 L:	xen-devel@lists.xenproject.org (moderated for non-subscribers)
 S:	Maintained
-F:	arch/arm64/xen/
 F:	arch/arm64/include/asm/xen/
+F:	arch/arm64/xen/
 
 XEN HYPERVISOR INTERFACE
 M:	Boris Ostrovsky <boris.ostrovsky@oracle.com>
 M:	Juergen Gross <jgross@suse.com>
 R:	Stefano Stabellini <sstabellini@kernel.org>
 L:	xen-devel@lists.xenproject.org (moderated for non-subscribers)
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip.git
 S:	Supported
-F:	arch/x86/xen/
-F:	arch/x86/platform/pvh/
-F:	drivers/*/xen-*front.c
-F:	drivers/xen/
-F:	arch/x86/include/asm/xen/
-F:	arch/x86/include/asm/pvclock-abi.h
-F:	include/xen/
-F:	include/uapi/xen/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip.git
 F:	Documentation/ABI/stable/sysfs-hypervisor-xen
 F:	Documentation/ABI/testing/sysfs-hypervisor-xen
+F:	arch/x86/include/asm/pvclock-abi.h
+F:	arch/x86/include/asm/xen/
+F:	arch/x86/platform/pvh/
+F:	arch/x86/xen/
+F:	drivers/*/xen-*front.c
+F:	drivers/xen/
+F:	include/uapi/xen/
+F:	include/xen/
 
 XEN NETWORK BACKEND DRIVER
 M:	Wei Liu <wei.liu@kernel.org>
@@ -18486,6 +18512,13 @@
 F:	drivers/xen/xen-scsiback.c
 F:	include/xen/interface/io/vscsiif.h
 
+XEN SOUND FRONTEND DRIVER
+M:	Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
+L:	xen-devel@lists.xenproject.org (moderated for non-subscribers)
+L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
+S:	Supported
+F:	sound/xen/*
+
 XEN SWIOTLB SUBSYSTEM
 M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
 L:	xen-devel@lists.xenproject.org (moderated for non-subscribers)
@@ -18494,22 +18527,15 @@
 F:	arch/x86/xen/*swiotlb*
 F:	drivers/xen/*swiotlb*
 
-XEN SOUND FRONTEND DRIVER
-M:	Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
-L:	xen-devel@lists.xenproject.org (moderated for non-subscribers)
-L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
-S:	Supported
-F:	sound/xen/*
-
 XFS FILESYSTEM
 M:	Darrick J. Wong <darrick.wong@oracle.com>
 M:	linux-xfs@vger.kernel.org
 L:	linux-xfs@vger.kernel.org
+S:	Supported
 W:	http://xfs.org/
 T:	git git://git.kernel.org/pub/scm/fs/xfs/xfs-linux.git
-S:	Supported
-F:	Documentation/admin-guide/xfs.rst
 F:	Documentation/ABI/testing/sysfs-fs-xfs
+F:	Documentation/admin-guide/xfs.rst
 F:	Documentation/filesystems/xfs-delayed-logging-design.txt
 F:	Documentation/filesystems/xfs-self-describing-metadata.txt
 F:	fs/xfs/
@@ -18529,6 +18555,17 @@
 F:	Documentation/devicetree/bindings/net/can/xilinx_can.txt
 F:	drivers/net/can/xilinx_can.c
 
+XILINX SD-FEC IP CORES
+M:	Derek Kiernan <derek.kiernan@xilinx.com>
+M:	Dragan Cvetic <dragan.cvetic@xilinx.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/misc/xlnx,sd-fec.txt
+F:	Documentation/misc-devices/xilinx_sdfec.rst
+F:	drivers/misc/Kconfig
+F:	drivers/misc/Makefile
+F:	drivers/misc/xilinx_sdfec.c
+F:	include/uapi/misc/xilinx_sdfec.h
+
 XILINX UARTLITE SERIAL DRIVER
 M:	Peter Korsgaard <jacmet@sunsite.dk>
 L:	linux-serial@vger.kernel.org
@@ -18539,23 +18576,12 @@
 M:	Hyun Kwon <hyun.kwon@xilinx.com>
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	linux-media@vger.kernel.org
-T:	git git://linuxtv.org/media_tree.git
 S:	Supported
+T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/devicetree/bindings/media/xilinx/
 F:	drivers/media/platform/xilinx/
 F:	include/uapi/linux/xilinx-v4l2-controls.h
 
-XILINX SD-FEC IP CORES
-M:	Derek Kiernan <derek.kiernan@xilinx.com>
-M:	Dragan Cvetic <dragan.cvetic@xilinx.com>
-S:	Maintained
-F:	Documentation/devicetree/bindings/misc/xlnx,sd-fec.txt
-F:	Documentation/misc-devices/xilinx_sdfec.rst
-F:	drivers/misc/xilinx_sdfec.c
-F:	drivers/misc/Kconfig
-F:	drivers/misc/Makefile
-F:	include/uapi/misc/xilinx_sdfec.h
-
 XILLYBUS DRIVER
 M:	Eli Billauer <eli.billauer@gmail.com>
 L:	linux-kernel@vger.kernel.org
@@ -18565,8 +18591,8 @@
 XLP9XX I2C DRIVER
 M:	George Cherian <gcherian@marvell.com>
 L:	linux-i2c@vger.kernel.org
-W:	http://www.marvell.com
 S:	Supported
+W:	http://www.marvell.com
 F:	Documentation/devicetree/bindings/i2c/i2c-xlp9xx.txt
 F:	drivers/i2c/busses/i2c-xlp9xx.c
 
@@ -18594,10 +18620,10 @@
 
 YAMA SECURITY MODULE
 M:	Kees Cook <keescook@chromium.org>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git yama/tip
 S:	Supported
-F:	security/yama/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git yama/tip
 F:	Documentation/admin-guide/LSM/Yama.rst
+F:	security/yama/
 
 YEALINK PHONE DRIVER
 M:	Henk Vergonet <Henk.Vergonet@gmail.com>
@@ -18608,10 +18634,10 @@
 
 Z8530 DRIVER FOR AX.25
 M:	Joerg Reuter <jreuter@yaina.de>
-W:	http://yaina.de/jreuter/
-W:	http://www.qsl.net/dl1bke/
 L:	linux-hams@vger.kernel.org
 S:	Maintained
+W:	http://yaina.de/jreuter/
+W:	http://www.qsl.net/dl1bke/
 F:	Documentation/networking/z8530drv.txt
 F:	drivers/net/hamradio/*scc.c
 F:	drivers/net/hamradio/z8530.h
@@ -18621,34 +18647,34 @@
 M:	Dan Streetman <ddstreet@ieee.org>
 L:	linux-mm@kvack.org
 S:	Maintained
-F:	mm/zbud.c
 F:	include/linux/zbud.h
+F:	mm/zbud.c
 
 ZD1211RW WIRELESS DRIVER
 M:	Daniel Drake <dsd@gentoo.org>
 M:	Ulrich Kunitz <kune@deine-taler.de>
-W:	http://zd1211.ath.cx/wiki/DriverRewrite
 L:	linux-wireless@vger.kernel.org
 L:	zd1211-devs@lists.sourceforge.net (subscribers-only)
 S:	Maintained
+W:	http://zd1211.ath.cx/wiki/DriverRewrite
 F:	drivers/net/wireless/zydas/zd1211rw/
 
 ZD1301 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org/
 W:	http://palosaari.fi/linux/
 Q:	https://patchwork.linuxtv.org/project/linux-media/list/
-S:	Maintained
 F:	drivers/media/usb/dvb-usb-v2/zd1301*
 
 ZD1301_DEMOD MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
+S:	Maintained
 W:	https://linuxtv.org/
 W:	http://palosaari.fi/linux/
 Q:	https://patchwork.linuxtv.org/project/linux-media/list/
-S:	Maintained
 F:	drivers/media/dvb-frontends/zd1301_demod*
 
 ZHAOXIN PROCESSOR SUPPORT
@@ -18662,17 +18688,17 @@
 M:	Naohiro Aota <naohiro.aota@wdc.com>
 R:	Johannes Thumshirn <jth@kernel.org>
 L:	linux-fsdevel@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs.git
 S:	Maintained
-F:	fs/zonefs/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs.git
 F:	Documentation/filesystems/zonefs.rst
+F:	fs/zonefs/
 
 ZPOOL COMPRESSED PAGE STORAGE API
 M:	Dan Streetman <ddstreet@ieee.org>
 L:	linux-mm@kvack.org
 S:	Maintained
-F:	mm/zpool.c
 F:	include/linux/zpool.h
+F:	mm/zpool.c
 
 ZRAM COMPRESSED RAM BLOCK DEVICE DRVIER
 M:	Minchan Kim <minchan@kernel.org>
@@ -18680,8 +18706,8 @@
 R:	Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
-F:	drivers/block/zram/
 F:	Documentation/admin-guide/blockdev/zram.rst
+F:	drivers/block/zram/
 
 ZS DECSTATION Z85C30 SERIAL DRIVER
 M:	"Maciej W. Rozycki" <macro@linux-mips.org>
@@ -18694,9 +18720,9 @@
 R:	Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
 L:	linux-mm@kvack.org
 S:	Maintained
-F:	mm/zsmalloc.c
-F:	include/linux/zsmalloc.h
 F:	Documentation/vm/zsmalloc.rst
+F:	include/linux/zsmalloc.h
+F:	mm/zsmalloc.c
 
 ZSWAP COMPRESSED SWAP CACHING
 M:	Seth Jennings <sjenning@redhat.com>
@@ -18709,8 +18735,8 @@
 THE REST
 M:	Linus Torvalds <torvalds@linux-foundation.org>
 L:	linux-kernel@vger.kernel.org
+S:	Buried alive in reporters
 Q:	http://patchwork.kernel.org/project/LKML/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
-S:	Buried alive in reporters
 F:	*
 F:	*/
diff --git a/Makefile b/Makefile
index c913429..49b2709 100644
--- a/Makefile
+++ b/Makefile
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 5
-PATCHLEVEL = 6
+PATCHLEVEL = 7
 SUBLEVEL = 0
-EXTRAVERSION =
+EXTRAVERSION = -rc2
 NAME = Kleptomaniac Octopus
 
 # *DOCUMENTATION*
@@ -399,8 +399,13 @@
 HOST_LFS_LDFLAGS := $(shell getconf LFS_LDFLAGS 2>/dev/null)
 HOST_LFS_LIBS := $(shell getconf LFS_LIBS 2>/dev/null)
 
-HOSTCC       = gcc
-HOSTCXX      = g++
+ifneq ($(LLVM),)
+HOSTCC	= clang
+HOSTCXX	= clang++
+else
+HOSTCC	= gcc
+HOSTCXX	= g++
+endif
 KBUILD_HOSTCFLAGS   := -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 \
 		-fomit-frame-pointer -std=gnu89 $(HOST_LFS_CFLAGS) \
 		$(HOSTCFLAGS)
@@ -409,16 +414,28 @@
 KBUILD_HOSTLDLIBS   := $(HOST_LFS_LIBS) $(HOSTLDLIBS)
 
 # Make variables (CC, etc...)
-LD		= $(CROSS_COMPILE)ld
-CC		= $(CROSS_COMPILE)gcc
 CPP		= $(CC) -E
+ifneq ($(LLVM),)
+CC		= clang
+LD		= ld.lld
+AR		= llvm-ar
+NM		= llvm-nm
+OBJCOPY		= llvm-objcopy
+OBJDUMP		= llvm-objdump
+READELF		= llvm-readelf
+OBJSIZE		= llvm-size
+STRIP		= llvm-strip
+else
+CC		= $(CROSS_COMPILE)gcc
+LD		= $(CROSS_COMPILE)ld
 AR		= $(CROSS_COMPILE)ar
 NM		= $(CROSS_COMPILE)nm
-STRIP		= $(CROSS_COMPILE)strip
 OBJCOPY		= $(CROSS_COMPILE)objcopy
 OBJDUMP		= $(CROSS_COMPILE)objdump
-OBJSIZE		= $(CROSS_COMPILE)size
 READELF		= $(CROSS_COMPILE)readelf
+OBJSIZE		= $(CROSS_COMPILE)size
+STRIP		= $(CROSS_COMPILE)strip
+endif
 PAHOLE		= pahole
 LEX		= flex
 YACC		= bison
@@ -538,7 +555,7 @@
 ifneq ($(GCC_TOOLCHAIN),)
 CLANG_FLAGS	+= --gcc-toolchain=$(GCC_TOOLCHAIN)
 endif
-ifeq ($(if $(AS),$(shell $(AS) --version 2>&1 | head -n 1 | grep clang)),)
+ifneq ($(LLVM_IAS),1)
 CLANG_FLAGS	+= -no-integrated-as
 endif
 CLANG_FLAGS	+= -Werror=unknown-warning-option
@@ -747,8 +764,6 @@
 KBUILD_CPPFLAGS += -Qunused-arguments
 KBUILD_CFLAGS += -Wno-format-invalid-specifier
 KBUILD_CFLAGS += -Wno-gnu
-# Quiet clang warning: comparison of unsigned expression < 0 is always false
-KBUILD_CFLAGS += -Wno-tautological-compare
 # CLANG uses a _MergedGlobals as optimization, but this breaks modpost, as the
 # source of a reference will be _MergedGlobals and not on of the whitelisted names.
 # See modpost pattern 2
@@ -1036,8 +1051,13 @@
 core-y		:= $(patsubst %/, %/built-in.a, $(core-y))
 drivers-y	:= $(patsubst %/, %/built-in.a, $(drivers-y))
 net-y		:= $(patsubst %/, %/built-in.a, $(net-y))
+libs-y2		:= $(patsubst %/, %/built-in.a, $(filter %/, $(libs-y)))
+ifdef CONFIG_MODULES
+libs-y1		:= $(filter-out %/, $(libs-y))
+libs-y2		+= $(patsubst %/, %/lib.a, $(filter %/, $(libs-y)))
+else
 libs-y1		:= $(patsubst %/, %/lib.a, $(libs-y))
-libs-y2		:= $(patsubst %/, %/built-in.a, $(filter-out %.a, $(libs-y)))
+endif
 virt-y		:= $(patsubst %/, %/built-in.a, $(virt-y))
 
 # Externally visible symbols (used by link-vmlinux.sh)
diff --git a/arch/.gitignore b/arch/.gitignore
index 7414689..4191da4 100644
--- a/arch/.gitignore
+++ b/arch/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 i386
 x86_64
diff --git a/arch/Kconfig b/arch/Kconfig
index 516f2b0..786a85d 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -248,11 +248,18 @@
 	bool
 
 #
-# Select if arch has an uncached kernel segment and provides the
-# uncached_kernel_address / cached_kernel_address symbols to use it
+# Select if the architecture provides the arch_dma_set_uncached symbol to
+# either provide an uncached segement alias for a DMA allocation, or
+# to remap the page tables in place.
 #
-config ARCH_HAS_UNCACHED_SEGMENT
-	select ARCH_HAS_DMA_PREP_COHERENT
+config ARCH_HAS_DMA_SET_UNCACHED
+	bool
+
+#
+# Select if the architectures provides the arch_dma_clear_uncached symbol
+# to undo an in-place page table remap for uncached access.
+#
+config ARCH_HAS_DMA_CLEAR_UNCACHED
 	bool
 
 # Select if arch init_task must go in the __init_task_data section
diff --git a/arch/alpha/configs/defconfig b/arch/alpha/configs/defconfig
index f4ec420..6293675 100644
--- a/arch/alpha/configs/defconfig
+++ b/arch/alpha/configs/defconfig
@@ -36,7 +36,6 @@
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_SCSI_AIC7XXX=m
 CONFIG_AIC7XXX_CMDS_PER_DEVICE=253
 # CONFIG_AIC7XXX_DEBUG_ENABLE is not set
@@ -53,7 +52,8 @@
 CONFIG_YELLOWFIN=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_RTC=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_CMOS=y
 CONFIG_EXT2_FS=y
 CONFIG_REISERFS_FS=m
 CONFIG_ISO9660_FS=y
diff --git a/arch/alpha/include/asm/mmzone.h b/arch/alpha/include/asm/mmzone.h
index 7ee144f..9b521c8 100644
--- a/arch/alpha/include/asm/mmzone.h
+++ b/arch/alpha/include/asm/mmzone.h
@@ -8,8 +8,6 @@
 
 #include <asm/smp.h>
 
-struct bootmem_data_t; /* stupid forward decl. */
-
 /*
  * Following are macros that are specific to this numa platform.
  */
diff --git a/arch/alpha/include/asm/page.h b/arch/alpha/include/asm/page.h
index f3fb284..e241bd8 100644
--- a/arch/alpha/include/asm/page.h
+++ b/arch/alpha/include/asm/page.h
@@ -90,9 +90,6 @@ typedef struct page *pgtable_t;
 #define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
 #endif /* CONFIG_DISCONTIGMEM */
 
-#define VM_DATA_DEFAULT_FLAGS		(VM_READ | VM_WRITE | VM_EXEC | \
-					 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
 #include <asm-generic/memory_model.h>
 #include <asm-generic/getorder.h>
 
diff --git a/arch/alpha/include/asm/pgtable.h b/arch/alpha/include/asm/pgtable.h
index 299791c..0267aa8 100644
--- a/arch/alpha/include/asm/pgtable.h
+++ b/arch/alpha/include/asm/pgtable.h
@@ -268,7 +268,6 @@ extern inline void pud_clear(pud_t * pudp)	{ pud_val(*pudp) = 0; }
 extern inline int pte_write(pte_t pte)		{ return !(pte_val(pte) & _PAGE_FOW); }
 extern inline int pte_dirty(pte_t pte)		{ return pte_val(pte) & _PAGE_DIRTY; }
 extern inline int pte_young(pte_t pte)		{ return pte_val(pte) & _PAGE_ACCESSED; }
-extern inline int pte_special(pte_t pte)	{ return 0; }
 
 extern inline pte_t pte_wrprotect(pte_t pte)	{ pte_val(pte) |= _PAGE_FOW; return pte; }
 extern inline pte_t pte_mkclean(pte_t pte)	{ pte_val(pte) &= ~(__DIRTY_BITS); return pte; }
@@ -276,7 +275,6 @@ extern inline pte_t pte_mkold(pte_t pte)	{ pte_val(pte) &= ~(__ACCESS_BITS); ret
 extern inline pte_t pte_mkwrite(pte_t pte)	{ pte_val(pte) &= ~_PAGE_FOW; return pte; }
 extern inline pte_t pte_mkdirty(pte_t pte)	{ pte_val(pte) |= __DIRTY_BITS; return pte; }
 extern inline pte_t pte_mkyoung(pte_t pte)	{ pte_val(pte) |= __ACCESS_BITS; return pte; }
-extern inline pte_t pte_mkspecial(pte_t pte)	{ return pte; }
 
 #define PAGE_DIR_OFFSET(tsk,address) pgd_offset((tsk),(address))
 
diff --git a/arch/alpha/kernel/.gitignore b/arch/alpha/kernel/.gitignore
index c5f676c..bbb90f9 100644
--- a/arch/alpha/kernel/.gitignore
+++ b/arch/alpha/kernel/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 vmlinux.lds
diff --git a/arch/alpha/kernel/sys_nautilus.c b/arch/alpha/kernel/sys_nautilus.c
index cd9a112..32850e4 100644
--- a/arch/alpha/kernel/sys_nautilus.c
+++ b/arch/alpha/kernel/sys_nautilus.c
@@ -187,10 +187,6 @@ nautilus_machine_check(unsigned long vector, unsigned long la_ptr)
 
 extern void pcibios_claim_one_bus(struct pci_bus *);
 
-static struct resource irongate_io = {
-	.name	= "Irongate PCI IO",
-	.flags	= IORESOURCE_IO,
-};
 static struct resource irongate_mem = {
 	.name	= "Irongate PCI MEM",
 	.flags	= IORESOURCE_MEM,
@@ -208,17 +204,19 @@ nautilus_init_pci(void)
 	struct pci_controller *hose = hose_head;
 	struct pci_host_bridge *bridge;
 	struct pci_bus *bus;
-	struct pci_dev *irongate;
 	unsigned long bus_align, bus_size, pci_mem;
 	unsigned long memtop = max_low_pfn << PAGE_SHIFT;
-	int ret;
 
 	bridge = pci_alloc_host_bridge(0);
 	if (!bridge)
 		return;
 
+	/* Use default IO. */
 	pci_add_resource(&bridge->windows, &ioport_resource);
-	pci_add_resource(&bridge->windows, &iomem_resource);
+	/* Irongate PCI memory aperture, calculate requred size before
+	   setting it up. */
+	pci_add_resource(&bridge->windows, &irongate_mem);
+
 	pci_add_resource(&bridge->windows, &busn_resource);
 	bridge->dev.parent = NULL;
 	bridge->sysdata = hose;
@@ -226,59 +224,49 @@ nautilus_init_pci(void)
 	bridge->ops = alpha_mv.pci_ops;
 	bridge->swizzle_irq = alpha_mv.pci_swizzle;
 	bridge->map_irq = alpha_mv.pci_map_irq;
+	bridge->size_windows = 1;
 
 	/* Scan our single hose.  */
-	ret = pci_scan_root_bus_bridge(bridge);
-	if (ret) {
+	if (pci_scan_root_bus_bridge(bridge)) {
 		pci_free_host_bridge(bridge);
 		return;
 	}
-
 	bus = hose->bus = bridge->bus;
 	pcibios_claim_one_bus(bus);
 
-	irongate = pci_get_domain_bus_and_slot(pci_domain_nr(bus), 0, 0);
-	bus->self = irongate;
-	bus->resource[0] = &irongate_io;
-	bus->resource[1] = &irongate_mem;
-
 	pci_bus_size_bridges(bus);
 
-	/* IO port range. */
-	bus->resource[0]->start = 0;
-	bus->resource[0]->end = 0xffff;
-
-	/* Set up PCI memory range - limit is hardwired to 0xffffffff,
-	   base must be at aligned to 16Mb. */
-	bus_align = bus->resource[1]->start;
-	bus_size = bus->resource[1]->end + 1 - bus_align;
+	/* Now we've got the size and alignment of PCI memory resources
+	   stored in irongate_mem. Set up the PCI memory range: limit is
+	   hardwired to 0xffffffff, base must be aligned to 16Mb. */
+	bus_align = irongate_mem.start;
+	bus_size = irongate_mem.end + 1 - bus_align;
 	if (bus_align < 0x1000000UL)
 		bus_align = 0x1000000UL;
 
 	pci_mem = (0x100000000UL - bus_size) & -bus_align;
+	irongate_mem.start = pci_mem;
+	irongate_mem.end = 0xffffffffUL;
 
-	bus->resource[1]->start = pci_mem;
-	bus->resource[1]->end = 0xffffffffUL;
-	if (request_resource(&iomem_resource, bus->resource[1]) < 0)
+	/* Register our newly calculated PCI memory window in the resource
+	   tree. */
+	if (request_resource(&iomem_resource, &irongate_mem) < 0)
 		printk(KERN_ERR "Failed to request MEM on hose 0\n");
 
+	printk(KERN_INFO "Irongate pci_mem %pR\n", &irongate_mem);
+
 	if (pci_mem < memtop)
 		memtop = pci_mem;
 	if (memtop > alpha_mv.min_mem_address) {
 		free_reserved_area(__va(alpha_mv.min_mem_address),
 				   __va(memtop), -1, NULL);
-		printk("nautilus_init_pci: %ldk freed\n",
+		printk(KERN_INFO "nautilus_init_pci: %ldk freed\n",
 			(memtop - alpha_mv.min_mem_address) >> 10);
 	}
-
 	if ((IRONGATE0->dev_vendor >> 16) > 0x7006)	/* Albacore? */
 		IRONGATE0->pci_mem = pci_mem;
 
 	pci_bus_assign_resources(bus);
-
-	/* pci_common_swizzle() relies on bus->self being NULL
-	   for the root bus, so just clear it. */
-	bus->self = NULL;
 	pci_bus_add_devices(bus);
 }
 
diff --git a/arch/alpha/kernel/syscalls/syscallhdr.sh b/arch/alpha/kernel/syscalls/syscallhdr.sh
index e5b99bd..1780e86 100644
--- a/arch/alpha/kernel/syscalls/syscallhdr.sh
+++ b/arch/alpha/kernel/syscalls/syscallhdr.sh
@@ -32,5 +32,5 @@
 	printf "#define __NR_syscalls\t%s\n" "${nxt}"
 	printf "#endif\n"
 	printf "\n"
-	printf "#endif /* %s */" "${fileguard}"
+	printf "#endif /* %s */\n" "${fileguard}"
 ) > "$out"
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index 7124ab8..ff30624 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -401,13 +401,61 @@
 	default y
 
 config ARC_HAS_ACCL_REGS
-	bool "Reg Pair ACCL:ACCH (FPU and/or MPY > 6)"
+	bool "Reg Pair ACCL:ACCH (FPU and/or MPY > 6 and/or DSP)"
 	default y
 	help
 	  Depending on the configuration, CPU can contain accumulator reg-pair
 	  (also referred to as r58:r59). These can also be used by gcc as GPR so
 	  kernel needs to save/restore per process
 
+config ARC_DSP_HANDLED
+	def_bool n
+
+config ARC_DSP_SAVE_RESTORE_REGS
+	def_bool n
+
+choice
+	prompt "DSP support"
+	default ARC_DSP_NONE
+	help
+	  Depending on the configuration, CPU can contain DSP registers
+	  (ACC0_GLO, ACC0_GHI, DSP_BFLY0, DSP_CTRL, DSP_FFT_CTRL).
+	  Bellow is options describing how to handle these registers in
+	  interrupt entry / exit and in context switch.
+
+config ARC_DSP_NONE
+	bool "No DSP extension presence in HW"
+	help
+	  No DSP extension presence in HW
+
+config ARC_DSP_KERNEL
+	bool "DSP extension in HW, no support for userspace"
+	select ARC_HAS_ACCL_REGS
+	select ARC_DSP_HANDLED
+	help
+	  DSP extension presence in HW, no support for DSP-enabled userspace
+	  applications. We don't save / restore DSP registers and only do
+	  some minimal preparations so userspace won't be able to break kernel
+
+config ARC_DSP_USERSPACE
+	bool "Support DSP for userspace apps"
+	select ARC_HAS_ACCL_REGS
+	select ARC_DSP_HANDLED
+	select ARC_DSP_SAVE_RESTORE_REGS
+	help
+	  DSP extension presence in HW, support save / restore DSP registers to
+	  run DSP-enabled userspace applications
+
+config ARC_DSP_AGU_USERSPACE
+	bool "Support DSP with AGU for userspace apps"
+	select ARC_HAS_ACCL_REGS
+	select ARC_DSP_HANDLED
+	select ARC_DSP_SAVE_RESTORE_REGS
+	help
+	  DSP and AGU extensions presence in HW, support save / restore DSP
+	  and AGU registers to run DSP-enabled userspace applications
+endchoice
+
 config ARC_IRQ_NO_AUTOSAVE
 	bool "Disable hardware autosave regfile on interrupts"
 	default n
diff --git a/arch/arc/boot/.gitignore b/arch/arc/boot/.gitignore
index c4c5fd5..675db14 100644
--- a/arch/arc/boot/.gitignore
+++ b/arch/arc/boot/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 uImage
diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi b/arch/arc/boot/dts/axs10x_mb.dtsi
index 1d109b0..99d3e71 100644
--- a/arch/arc/boot/dts/axs10x_mb.dtsi
+++ b/arch/arc/boot/dts/axs10x_mb.dtsi
@@ -305,7 +305,6 @@ gpio1_bankc: gpio-controller@2 {
 		pgu@17000 {
 			compatible = "snps,arcpgu";
 			reg = <0x17000 0x400>;
-			encoder-slave = <&adv7511>;
 			clocks = <&pguclk>;
 			clock-names = "pxlclk";
 			memory-region = <&frame_buffer>;
diff --git a/arch/arc/include/asm/arcregs.h b/arch/arc/include/asm/arcregs.h
index f7e4324..2162023 100644
--- a/arch/arc/include/asm/arcregs.h
+++ b/arch/arc/include/asm/arcregs.h
@@ -118,6 +118,32 @@
 #define ARC_AUX_DPFP_2H         0x304
 #define ARC_AUX_DPFP_STAT       0x305
 
+/*
+ * DSP-related registers
+ * Registers names must correspond to dsp_callee_regs structure fields names
+ * for automatic offset calculation in DSP_AUX_SAVE_RESTORE macros.
+ */
+#define ARC_AUX_DSP_BUILD	0x7A
+#define ARC_AUX_ACC0_LO		0x580
+#define ARC_AUX_ACC0_GLO	0x581
+#define ARC_AUX_ACC0_HI		0x582
+#define ARC_AUX_ACC0_GHI	0x583
+#define ARC_AUX_DSP_BFLY0	0x598
+#define ARC_AUX_DSP_CTRL	0x59F
+#define ARC_AUX_DSP_FFT_CTRL	0x59E
+
+#define ARC_AUX_AGU_BUILD	0xCC
+#define ARC_AUX_AGU_AP0		0x5C0
+#define ARC_AUX_AGU_AP1		0x5C1
+#define ARC_AUX_AGU_AP2		0x5C2
+#define ARC_AUX_AGU_AP3		0x5C3
+#define ARC_AUX_AGU_OS0		0x5D0
+#define ARC_AUX_AGU_OS1		0x5D1
+#define ARC_AUX_AGU_MOD0	0x5E0
+#define ARC_AUX_AGU_MOD1	0x5E1
+#define ARC_AUX_AGU_MOD2	0x5E2
+#define ARC_AUX_AGU_MOD3	0x5E3
+
 #ifndef __ASSEMBLY__
 
 #include <soc/arc/aux.h>
diff --git a/arch/arc/include/asm/asserts.h b/arch/arc/include/asm/asserts.h
new file mode 100644
index 0000000..108f33b
--- /dev/null
+++ b/arch/arc/include/asm/asserts.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2020 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Author: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
+ */
+#ifndef __ASM_ARC_ASSERTS_H
+#define __ASM_ARC_ASSERTS_H
+
+/* Helpers to sanitize config options. */
+
+void chk_opt_strict(char *opt_name, bool hw_exists, bool opt_ena);
+void chk_opt_weak(char *opt_name, bool hw_exists, bool opt_ena);
+
+/*
+ * Check required config option:
+ *  - panic in case of OPT enabled but corresponding HW absent.
+ *  - warn in case of OPT disabled but corresponding HW exists.
+*/
+#define CHK_OPT_STRICT(opt_name, hw_exists)				\
+({									\
+	chk_opt_strict(#opt_name, hw_exists, IS_ENABLED(opt_name));	\
+})
+
+/*
+ * Check optional config option:
+ *  - panic in case of OPT enabled but corresponding HW absent.
+*/
+#define CHK_OPT_WEAK(opt_name, hw_exists)				\
+({									\
+	chk_opt_weak(#opt_name, hw_exists, IS_ENABLED(opt_name));	\
+})
+
+#endif /* __ASM_ARC_ASSERTS_H */
diff --git a/arch/arc/include/asm/dsp-impl.h b/arch/arc/include/asm/dsp-impl.h
new file mode 100644
index 0000000..e1aa212
--- /dev/null
+++ b/arch/arc/include/asm/dsp-impl.h
@@ -0,0 +1,150 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2020 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Author: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
+ */
+#ifndef __ASM_ARC_DSP_IMPL_H
+#define __ASM_ARC_DSP_IMPL_H
+
+#include <asm/dsp.h>
+
+#define DSP_CTRL_DISABLED_ALL		0
+
+#ifdef __ASSEMBLY__
+
+/* clobbers r5 register */
+.macro DSP_EARLY_INIT
+	lr	r5, [ARC_AUX_DSP_BUILD]
+	bmsk	r5, r5, 7
+	breq    r5, 0, 1f
+	mov	r5, DSP_CTRL_DISABLED_ALL
+	sr	r5, [ARC_AUX_DSP_CTRL]
+1:
+.endm
+
+/* clobbers r10, r11 registers pair */
+.macro DSP_SAVE_REGFILE_IRQ
+#if defined(CONFIG_ARC_DSP_KERNEL)
+	/*
+	 * Drop any changes to DSP_CTRL made by userspace so userspace won't be
+	 * able to break kernel - reset it to DSP_CTRL_DISABLED_ALL value
+	 */
+	mov	r10, DSP_CTRL_DISABLED_ALL
+	sr	r10, [ARC_AUX_DSP_CTRL]
+
+#elif defined(CONFIG_ARC_DSP_SAVE_RESTORE_REGS)
+	/*
+	 * Save DSP_CTRL register and reset it to value suitable for kernel
+	 * (DSP_CTRL_DISABLED_ALL)
+	 */
+	mov	r10, DSP_CTRL_DISABLED_ALL
+	aex	r10, [ARC_AUX_DSP_CTRL]
+	st	r10, [sp, PT_DSP_CTRL]
+
+#endif
+.endm
+
+/* clobbers r10, r11 registers pair */
+.macro DSP_RESTORE_REGFILE_IRQ
+#if defined(CONFIG_ARC_DSP_SAVE_RESTORE_REGS)
+	ld	r10, [sp, PT_DSP_CTRL]
+	sr	r10, [ARC_AUX_DSP_CTRL]
+
+#endif
+.endm
+
+#else /* __ASEMBLY__ */
+
+#include <linux/sched.h>
+#include <asm/asserts.h>
+#include <asm/switch_to.h>
+
+#ifdef CONFIG_ARC_DSP_SAVE_RESTORE_REGS
+
+/*
+ * As we save new and restore old AUX register value in the same place we
+ * can optimize a bit and use AEX instruction (swap contents of an auxiliary
+ * register with a core register) instead of LR + SR pair.
+ */
+#define AUX_SAVE_RESTORE(_saveto, _readfrom, _offt, _aux)		\
+do {									\
+	long unsigned int _scratch;					\
+									\
+	__asm__ __volatile__(						\
+		"ld	%0, [%2, %4]			\n"		\
+		"aex	%0, [%3]			\n"		\
+		"st	%0, [%1, %4]			\n"		\
+		:							\
+		  "=&r" (_scratch)	/* must be early clobber */	\
+		:							\
+		   "r" (_saveto),					\
+		   "r" (_readfrom),					\
+		   "Ir" (_aux),						\
+		   "Ir" (_offt)						\
+		:							\
+		  "memory"						\
+	);								\
+} while (0)
+
+#define DSP_AUX_SAVE_RESTORE(_saveto, _readfrom, _aux)			\
+	AUX_SAVE_RESTORE(_saveto, _readfrom,				\
+		offsetof(struct dsp_callee_regs, _aux),			\
+		ARC_AUX_##_aux)
+
+static inline void dsp_save_restore(struct task_struct *prev,
+					struct task_struct *next)
+{
+	long unsigned int *saveto = &prev->thread.dsp.ACC0_GLO;
+	long unsigned int *readfrom = &next->thread.dsp.ACC0_GLO;
+
+	DSP_AUX_SAVE_RESTORE(saveto, readfrom, ACC0_GLO);
+	DSP_AUX_SAVE_RESTORE(saveto, readfrom, ACC0_GHI);
+
+	DSP_AUX_SAVE_RESTORE(saveto, readfrom, DSP_BFLY0);
+	DSP_AUX_SAVE_RESTORE(saveto, readfrom, DSP_FFT_CTRL);
+
+#ifdef CONFIG_ARC_DSP_AGU_USERSPACE
+	DSP_AUX_SAVE_RESTORE(saveto, readfrom, AGU_AP0);
+	DSP_AUX_SAVE_RESTORE(saveto, readfrom, AGU_AP1);
+	DSP_AUX_SAVE_RESTORE(saveto, readfrom, AGU_AP2);
+	DSP_AUX_SAVE_RESTORE(saveto, readfrom, AGU_AP3);
+
+	DSP_AUX_SAVE_RESTORE(saveto, readfrom, AGU_OS0);
+	DSP_AUX_SAVE_RESTORE(saveto, readfrom, AGU_OS1);
+
+	DSP_AUX_SAVE_RESTORE(saveto, readfrom, AGU_MOD0);
+	DSP_AUX_SAVE_RESTORE(saveto, readfrom, AGU_MOD1);
+	DSP_AUX_SAVE_RESTORE(saveto, readfrom, AGU_MOD2);
+	DSP_AUX_SAVE_RESTORE(saveto, readfrom, AGU_MOD3);
+#endif /* CONFIG_ARC_DSP_AGU_USERSPACE */
+}
+
+#else /* !CONFIG_ARC_DSP_SAVE_RESTORE_REGS */
+#define dsp_save_restore(p, n)
+#endif /* CONFIG_ARC_DSP_SAVE_RESTORE_REGS */
+
+static inline bool dsp_exist(void)
+{
+	struct bcr_generic bcr;
+
+	READ_BCR(ARC_AUX_DSP_BUILD, bcr);
+	return !!bcr.ver;
+}
+
+static inline bool agu_exist(void)
+{
+	struct bcr_generic bcr;
+
+	READ_BCR(ARC_AUX_AGU_BUILD, bcr);
+	return !!bcr.ver;
+}
+
+static inline void dsp_config_check(void)
+{
+	CHK_OPT_STRICT(CONFIG_ARC_DSP_HANDLED, dsp_exist());
+	CHK_OPT_WEAK(CONFIG_ARC_DSP_AGU_USERSPACE, agu_exist());
+}
+
+#endif /* __ASEMBLY__ */
+#endif /* __ASM_ARC_DSP_IMPL_H */
diff --git a/arch/arc/include/asm/dsp.h b/arch/arc/include/asm/dsp.h
new file mode 100644
index 0000000..202c78e
--- /dev/null
+++ b/arch/arc/include/asm/dsp.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2020 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Author: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
+ */
+#ifndef __ASM_ARC_DSP_H
+#define __ASM_ARC_DSP_H
+
+#ifndef __ASSEMBLY__
+
+/*
+ * DSP-related saved registers - need to be saved only when you are
+ * scheduled out.
+ * structure fields name must correspond to aux register defenitions for
+ * automatic offset calculation in DSP_AUX_SAVE_RESTORE macros
+ */
+struct dsp_callee_regs {
+	unsigned long ACC0_GLO, ACC0_GHI, DSP_BFLY0, DSP_FFT_CTRL;
+#ifdef CONFIG_ARC_DSP_AGU_USERSPACE
+	unsigned long AGU_AP0, AGU_AP1, AGU_AP2, AGU_AP3;
+	unsigned long AGU_OS0, AGU_OS1;
+	unsigned long AGU_MOD0, AGU_MOD1, AGU_MOD2, AGU_MOD3;
+#endif
+};
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __ASM_ARC_DSP_H */
diff --git a/arch/arc/include/asm/entry-arcv2.h b/arch/arc/include/asm/entry-arcv2.h
index 0b8b63d..ae0aa53 100644
--- a/arch/arc/include/asm/entry-arcv2.h
+++ b/arch/arc/include/asm/entry-arcv2.h
@@ -4,6 +4,7 @@
 #define __ASM_ARC_ENTRY_ARCV2_H
 
 #include <asm/asm-offsets.h>
+#include <asm/dsp-impl.h>
 #include <asm/irqflags-arcv2.h>
 #include <asm/thread_info.h>	/* For THREAD_SIZE */
 
@@ -165,6 +166,8 @@
 	ST2	r58, r59, PT_r58
 #endif
 
+	/* clobbers r10, r11 registers pair */
+	DSP_SAVE_REGFILE_IRQ
 .endm
 
 /*------------------------------------------------------------------------*/
@@ -189,6 +192,9 @@
 	ld	r25, [sp, PT_user_r25]
 #endif
 
+	/* clobbers r10, r11 registers pair */
+	DSP_RESTORE_REGFILE_IRQ
+
 #ifdef CONFIG_ARC_HAS_ACCL_REGS
 	LD2	r58, r59, PT_r58
 #endif
diff --git a/arch/arc/include/asm/page.h b/arch/arc/include/asm/page.h
index 0a32e8c..b0dfed0 100644
--- a/arch/arc/include/asm/page.h
+++ b/arch/arc/include/asm/page.h
@@ -102,7 +102,7 @@ typedef pte_t * pgtable_t;
 #define virt_addr_valid(kaddr)  pfn_valid(virt_to_pfn(kaddr))
 
 /* Default Permissions for stack/heaps pages (Non Executable) */
-#define VM_DATA_DEFAULT_FLAGS   (VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+#define VM_DATA_DEFAULT_FLAGS	VM_DATA_FLAGS_NON_EXEC
 
 #define WANT_PAGE_VIRTUAL   1
 
diff --git a/arch/arc/include/asm/processor.h b/arch/arc/include/asm/processor.h
index ec532d1..0fcea5b 100644
--- a/arch/arc/include/asm/processor.h
+++ b/arch/arc/include/asm/processor.h
@@ -14,6 +14,7 @@
 #ifndef __ASSEMBLY__
 
 #include <asm/ptrace.h>
+#include <asm/dsp.h>
 #include <asm/fpu.h>
 
 #ifdef CONFIG_ARC_PLAT_EZNPS
@@ -31,6 +32,9 @@ struct thread_struct {
 	unsigned long ksp;	/* kernel mode stack pointer */
 	unsigned long callee_reg;	/* pointer to callee regs */
 	unsigned long fault_address;	/* dbls as brkpt holder as well */
+#ifdef CONFIG_ARC_DSP_SAVE_RESTORE_REGS
+	struct dsp_callee_regs dsp;
+#endif
 #ifdef CONFIG_ARC_FPU_SAVE_RESTORE
 	struct arc_fpu fpu;
 #endif
diff --git a/arch/arc/include/asm/ptrace.h b/arch/arc/include/asm/ptrace.h
index ba9854e..2fdb87a 100644
--- a/arch/arc/include/asm/ptrace.h
+++ b/arch/arc/include/asm/ptrace.h
@@ -91,6 +91,9 @@ struct pt_regs {
 #ifdef CONFIG_ARC_HAS_ACCL_REGS
 	unsigned long r58, r59;	/* ACCL/ACCH used by FPU / DSP MPY */
 #endif
+#ifdef CONFIG_ARC_DSP_SAVE_RESTORE_REGS
+	unsigned long DSP_CTRL;
+#endif
 
 	/*------- Below list auto saved by h/w -----------*/
 	unsigned long r0, r1, r2, r3, r4, r5, r6, r7, r8, r9, r10, r11;
diff --git a/arch/arc/include/asm/switch_to.h b/arch/arc/include/asm/switch_to.h
index aadf65b..4a3d679 100644
--- a/arch/arc/include/asm/switch_to.h
+++ b/arch/arc/include/asm/switch_to.h
@@ -9,6 +9,7 @@
 #ifndef __ASSEMBLY__
 
 #include <linux/sched.h>
+#include <asm/dsp-impl.h>
 #include <asm/fpu.h>
 
 #ifdef CONFIG_ARC_PLAT_EZNPS
@@ -24,6 +25,7 @@ struct task_struct *__switch_to(struct task_struct *p, struct task_struct *n);
 #define switch_to(prev, next, last)	\
 do {					\
 	ARC_EZNPS_DP_PREV(prev, next);	\
+	dsp_save_restore(prev, next);	\
 	fpu_save_restore(prev, next);	\
 	last = __switch_to(prev, next);\
 	mb();				\
diff --git a/arch/arc/kernel/.gitignore b/arch/arc/kernel/.gitignore
index c5f676c..bbb90f9 100644
--- a/arch/arc/kernel/.gitignore
+++ b/arch/arc/kernel/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 vmlinux.lds
diff --git a/arch/arc/kernel/asm-offsets.c b/arch/arc/kernel/asm-offsets.c
index c783bcd..0e88403 100644
--- a/arch/arc/kernel/asm-offsets.c
+++ b/arch/arc/kernel/asm-offsets.c
@@ -12,6 +12,7 @@
 #include <asm/hardirq.h>
 #include <asm/page.h>
 
+
 int main(void)
 {
 	DEFINE(TASK_THREAD, offsetof(struct task_struct, thread));
@@ -75,6 +76,9 @@ int main(void)
 	OFFSET(PT_r58, pt_regs, r58);
 	OFFSET(PT_r59, pt_regs, r59);
 #endif
+#ifdef CONFIG_ARC_DSP_SAVE_RESTORE_REGS
+	OFFSET(PT_DSP_CTRL, pt_regs, DSP_CTRL);
+#endif
 
 	return 0;
 }
diff --git a/arch/arc/kernel/head.S b/arch/arc/kernel/head.S
index 6f41265..6eb23f1 100644
--- a/arch/arc/kernel/head.S
+++ b/arch/arc/kernel/head.S
@@ -14,6 +14,7 @@
 #include <asm/entry.h>
 #include <asm/arcregs.h>
 #include <asm/cache.h>
+#include <asm/dsp-impl.h>
 #include <asm/irqflags.h>
 
 .macro CPU_EARLY_SETUP
@@ -59,6 +60,9 @@
 #endif
 	kflag	r5
 #endif
+	; Config DSP_CTRL properly, so kernel may use integer multiply,
+	; multiply-accumulate, and divide operations
+	DSP_EARLY_INIT
 .endm
 
 	.section .init.text, "ax",@progbits
diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c
index aa41af6..b2b1cb6 100644
--- a/arch/arc/kernel/setup.c
+++ b/arch/arc/kernel/setup.c
@@ -19,6 +19,7 @@
 #include <uapi/linux/mount.h>
 #include <asm/sections.h>
 #include <asm/arcregs.h>
+#include <asm/asserts.h>
 #include <asm/tlb.h>
 #include <asm/setup.h>
 #include <asm/page.h>
@@ -26,6 +27,7 @@
 #include <asm/unwind.h>
 #include <asm/mach_desc.h>
 #include <asm/smp.h>
+#include <asm/dsp-impl.h>
 
 #define FIX_PTR(x)  __asm__ __volatile__(";" : "+r"(x))
 
@@ -389,11 +391,24 @@ static char *arc_extn_mumbojumbo(int cpu_id, char *buf, int len)
 	return buf;
 }
 
+void chk_opt_strict(char *opt_name, bool hw_exists, bool opt_ena)
+{
+	if (hw_exists && !opt_ena)
+		pr_warn(" ! Enable %s for working apps\n", opt_name);
+	else if (!hw_exists && opt_ena)
+		panic("Disable %s, hardware NOT present\n", opt_name);
+}
+
+void chk_opt_weak(char *opt_name, bool hw_exists, bool opt_ena)
+{
+	if (!hw_exists && opt_ena)
+		panic("Disable %s, hardware NOT present\n", opt_name);
+}
+
 static void arc_chk_core_config(void)
 {
 	struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
-	int saved = 0, present = 0;
-	char *opt_nm = NULL;
+	int present = 0;
 
 	if (!cpu->extn.timer0)
 		panic("Timer0 is not present!\n");
@@ -425,23 +440,16 @@ static void arc_chk_core_config(void)
 	 */
 
 	if (is_isa_arcompact()) {
-		opt_nm = "CONFIG_ARC_FPU_SAVE_RESTORE";
-		saved = IS_ENABLED(CONFIG_ARC_FPU_SAVE_RESTORE);
-
 		/* only DPDP checked since SP has no arch visible regs */
 		present = cpu->extn.fpu_dp;
+		CHK_OPT_STRICT(CONFIG_ARC_FPU_SAVE_RESTORE, present);
 	} else {
-		opt_nm = "CONFIG_ARC_HAS_ACCL_REGS";
-		saved = IS_ENABLED(CONFIG_ARC_HAS_ACCL_REGS);
-
 		/* Accumulator Low:High pair (r58:59) present if DSP MPY or FPU */
 		present = cpu->extn_mpy.dsp | cpu->extn.fpu_sp | cpu->extn.fpu_dp;
-	}
+		CHK_OPT_STRICT(CONFIG_ARC_HAS_ACCL_REGS, present);
 
-	if (present && !saved)
-		pr_warn("Enable %s for working apps\n", opt_nm);
-	else if (!present && saved)
-		panic("Disable %s, hardware NOT present\n", opt_nm);
+		dsp_config_check();
+	}
 }
 
 /*
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index b70d7de..f46e18a 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1201,23 +1201,49 @@
 
 	config STM32F4_DEBUG_UART
 		bool "Use STM32F4 UART for low-level debug"
-		depends on ARCH_STM32
+		depends on MACH_STM32F429 || MACH_STM32F469
 		select DEBUG_STM32_UART
 		help
 		  Say Y here if you want kernel low-level debugging support
 		  on STM32F4 based platforms, which default UART is wired on
-		  USART1.
+		  USART1, but another UART instance can be selected by modifying
+		  CONFIG_DEBUG_UART_PHYS.
 
 		  If unsure, say N.
 
 	config STM32F7_DEBUG_UART
 		bool "Use STM32F7 UART for low-level debug"
-		depends on ARCH_STM32
+		depends on MACH_STM32F746 || MACH_STM32F769
 		select DEBUG_STM32_UART
 		help
 		  Say Y here if you want kernel low-level debugging support
 		  on STM32F7 based platforms, which default UART is wired on
-		  USART1.
+		  USART1, but another UART instance can be selected by modifying
+		  CONFIG_DEBUG_UART_PHYS.
+
+		  If unsure, say N.
+
+	config STM32H7_DEBUG_UART
+		bool "Use STM32H7 UART for low-level debug"
+		depends on MACH_STM32H743
+		select DEBUG_STM32_UART
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on STM32H7 based platforms, which default UART is wired on
+		  USART1, but another UART instance can be selected by modifying
+		  CONFIG_DEBUG_UART_PHYS.
+
+		  If unsure, say N.
+
+	config STM32MP1_DEBUG_UART
+		bool "Use STM32MP1 UART for low-level debug"
+		depends on MACH_STM32MP157
+		select DEBUG_STM32_UART
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on STM32MP1 based platforms, wich default UART is wired on
+		  UART4, but another UART instance can be selected by modifying
+		  CONFIG_DEBUG_UART_PHYS and CONFIG_DEBUG_UART_VIRT.
 
 		  If unsure, say N.
 
@@ -1619,6 +1645,9 @@
 	default 0x3e000000 if DEBUG_BCM_KONA_UART
 	default 0x3f201000 if DEBUG_BCM2836
 	default 0x4000e400 if DEBUG_LL_UART_EFM32
+	default 0x40010000 if STM32MP1_DEBUG_UART
+	default 0x40011000 if STM32F4_DEBUG_UART || STM32F7_DEBUG_UART || \
+				STM32H7_DEBUG_UART
 	default 0x40028000 if DEBUG_AT91_SAMV7_USART1
 	default 0x40081000 if DEBUG_LPC18XX_UART0
 	default 0x40090000 if DEBUG_LPC32XX
@@ -1713,7 +1742,7 @@
 		DEBUG_S3C64XX_UART || \
 		DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
 		DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \
-		DEBUG_AT91_UART
+		DEBUG_AT91_UART || DEBUG_STM32_UART
 
 config DEBUG_UART_VIRT
 	hex "Virtual base address of debug UART"
@@ -1779,6 +1808,7 @@
 	default 0xfcfe8600 if DEBUG_BCM63XX_UART
 	default 0xfd000000 if DEBUG_SPEAR3XX || DEBUG_SPEAR13XX
 	default 0xfd883000 if DEBUG_ALPINE_UART0
+	default 0xfe010000 if STM32MP1_DEBUG_UART
 	default 0xfe017000 if DEBUG_MMP_UART2
 	default 0xfe018000 if DEBUG_MMP_UART3
 	default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART
@@ -1823,7 +1853,7 @@
 		DEBUG_S3C64XX_UART || \
 		DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
 		DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \
-		DEBUG_AT91_UART
+		DEBUG_AT91_UART || DEBUG_STM32_UART
 
 config DEBUG_UART_8250_SHIFT
 	int "Register offset shift for the 8250 debug UART"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index e1d13d7..7d5cd0f 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -152,6 +152,7 @@
 ifeq ($(CONFIG_ARCH_SA1100),y)
 textofs-$(CONFIG_SA1111) := 0x00208000
 endif
+textofs-$(CONFIG_ARCH_IPQ40XX) := 0x00208000
 textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000
 textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
 textofs-$(CONFIG_ARCH_MESON) := 0x00208000
diff --git a/arch/arm/boot/.gitignore b/arch/arm/boot/.gitignore
index ce1c5ff..8c75932 100644
--- a/arch/arm/boot/.gitignore
+++ b/arch/arm/boot/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 Image
 zImage
 xipImage
diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore
index 86b2f5d..db05c6e 100644
--- a/arch/arm/boot/compressed/.gitignore
+++ b/arch/arm/boot/compressed/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 ashldi3.S
 bswapsdi2.S
 font.c
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 04f7721..e8e1c86 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -151,6 +151,25 @@
 .L_\@:
 		.endm
 
+		/*
+		 * The kernel build system appends the size of the
+		 * decompressed kernel at the end of the compressed data
+		 * in little-endian form.
+		 */
+		.macro	get_inflated_image_size, res:req, tmp1:req, tmp2:req
+		adr	\res, .Linflated_image_size_offset
+		ldr	\tmp1, [\res]
+		add	\tmp1, \tmp1, \res	@ address of inflated image size
+
+		ldrb	\res, [\tmp1]		@ get_unaligned_le32
+		ldrb	\tmp2, [\tmp1, #1]
+		orr	\res, \res, \tmp2, lsl #8
+		ldrb	\tmp2, [\tmp1, #2]
+		ldrb	\tmp1, [\tmp1, #3]
+		orr	\res, \res, \tmp2, lsl #16
+		orr	\res, \res, \tmp1, lsl #24
+		.endm
+
 		.section ".start", "ax"
 /*
  * sort out different calling conventions
@@ -268,15 +287,15 @@
 		 */
 		mov	r0, pc
 		cmp	r0, r4
-		ldrcc	r0, LC0+32
+		ldrcc	r0, LC0+28
 		addcc	r0, r0, pc
 		cmpcc	r4, r0
 		orrcc	r4, r4, #1		@ remember we skipped cache_on
 		blcs	cache_on
 
 restart:	adr	r0, LC0
-		ldmia	r0, {r1, r2, r3, r6, r10, r11, r12}
-		ldr	sp, [r0, #28]
+		ldmia	r0, {r1, r2, r3, r6, r11, r12}
+		ldr	sp, [r0, #24]
 
 		/*
 		 * We might be running at a different address.  We need
@@ -284,20 +303,8 @@
 		 */
 		sub	r0, r0, r1		@ calculate the delta offset
 		add	r6, r6, r0		@ _edata
-		add	r10, r10, r0		@ inflated kernel size location
 
-		/*
-		 * The kernel build system appends the size of the
-		 * decompressed kernel at the end of the compressed data
-		 * in little-endian form.
-		 */
-		ldrb	r9, [r10, #0]
-		ldrb	lr, [r10, #1]
-		orr	r9, r9, lr, lsl #8
-		ldrb	lr, [r10, #2]
-		ldrb	r10, [r10, #3]
-		orr	r9, r9, lr, lsl #16
-		orr	r9, r9, r10, lsl #24
+		get_inflated_image_size	r9, r10, lr
 
 #ifndef CONFIG_ZBOOT_ROM
 		/* malloc space is above the relocated stack (64k max) */
@@ -521,11 +528,8 @@
 		/* Preserve offset to relocated code. */
 		sub	r6, r9, r6
 
-#ifndef CONFIG_ZBOOT_ROM
-		/* cache_clean_flush may use the stack, so relocate it */
-		add	sp, sp, r6
-#endif
-
+		mov	r0, r9			@ start of relocated zImage
+		add	r1, sp, r6		@ end of relocated zImage
 		bl	cache_clean_flush
 
 		badr	r0, restart
@@ -622,6 +626,11 @@
 		add	r2, sp, #0x10000	@ 64k max
 		mov	r3, r7
 		bl	decompress_kernel
+
+		get_inflated_image_size	r1, r2, r3
+
+		mov	r0, r4			@ start of inflated image
+		add	r1, r1, r0		@ end of inflated image
 		bl	cache_clean_flush
 		bl	cache_off
 
@@ -652,13 +661,15 @@
 		.word	__bss_start		@ r2
 		.word	_end			@ r3
 		.word	_edata			@ r6
-		.word	input_data_end - 4	@ r10 (inflated size location)
 		.word	_got_start		@ r11
 		.word	_got_end		@ ip
 		.word	.L_user_stack_end	@ sp
 		.word	_end - restart + 16384 + 1024*1024
 		.size	LC0, . - LC0
 
+.Linflated_image_size_offset:
+		.long	(input_data_end - 4) - .
+
 #ifdef CONFIG_ARCH_RPC
 		.globl	params
 params:		ldr	r0, =0x10000100		@ params_phys for RPC
@@ -668,6 +679,24 @@
 #endif
 
 /*
+ * dcache_line_size - get the minimum D-cache line size from the CTR register
+ * on ARMv7.
+ */
+		.macro	dcache_line_size, reg, tmp
+#ifdef CONFIG_CPU_V7M
+		movw	\tmp, #:lower16:BASEADDR_V7M_SCB + V7M_SCB_CTR
+		movt	\tmp, #:upper16:BASEADDR_V7M_SCB + V7M_SCB_CTR
+		ldr	\tmp, [\tmp]
+#else
+		mrc	p15, 0, \tmp, c0, c0, 1		@ read ctr
+#endif
+		lsr	\tmp, \tmp, #16
+		and	\tmp, \tmp, #0xf		@ cache line size encoding
+		mov	\reg, #4			@ bytes per word
+		mov	\reg, \reg, lsl \tmp		@ actual cache line size
+		.endm
+
+/*
  * Turn on the cache.  We need to setup some page tables so that we
  * can have both the I and D caches on.
  *
@@ -1159,8 +1188,6 @@
 		bic	r0, r0, #0x000c
 #endif
 		mcr	p15, 0, r0, c1, c0	@ turn MMU and cache off
-		mov	r12, lr
-		bl	__armv7_mmu_cache_flush
 		mov	r0, #0
 #ifdef CONFIG_MMU
 		mcr	p15, 0, r0, c8, c7, 0	@ invalidate whole TLB
@@ -1168,11 +1195,14 @@
 		mcr	p15, 0, r0, c7, c5, 6	@ invalidate BTC
 		mcr	p15, 0, r0, c7, c10, 4	@ DSB
 		mcr	p15, 0, r0, c7, c5, 4	@ ISB
-		mov	pc, r12
+		mov	pc, lr
 
 /*
  * Clean and flush the cache to maintain consistency.
  *
+ * On entry,
+ *  r0 = start address
+ *  r1 = end address (exclusive)
  * On exit,
  *  r1, r2, r3, r9, r10, r11, r12 corrupted
  * This routine must preserve:
@@ -1181,6 +1211,7 @@
 		.align	5
 cache_clean_flush:
 		mov	r3, #16
+		mov	r11, r1
 		b	call_cache_fn
 
 __armv4_mpu_cache_flush:
@@ -1231,51 +1262,16 @@
 		mcr	p15, 0, r10, c7, c14, 0	@ clean+invalidate D
 		b	iflush
 hierarchical:
-		mcr	p15, 0, r10, c7, c10, 5	@ DMB
-		stmfd	sp!, {r0-r7, r9-r11}
-		mrc	p15, 1, r0, c0, c0, 1	@ read clidr
-		ands	r3, r0, #0x7000000	@ extract loc from clidr
-		mov	r3, r3, lsr #23		@ left align loc bit field
-		beq	finished		@ if loc is 0, then no need to clean
-		mov	r10, #0			@ start clean at cache level 0
-loop1:
-		add	r2, r10, r10, lsr #1	@ work out 3x current cache level
-		mov	r1, r0, lsr r2		@ extract cache type bits from clidr
-		and	r1, r1, #7		@ mask of the bits for current cache only
-		cmp	r1, #2			@ see what cache we have at this level
-		blt	skip			@ skip if no cache, or just i-cache
-		mcr	p15, 2, r10, c0, c0, 0	@ select current cache level in cssr
-		mcr	p15, 0, r10, c7, c5, 4	@ isb to sych the new cssr&csidr
-		mrc	p15, 1, r1, c0, c0, 0	@ read the new csidr
-		and	r2, r1, #7		@ extract the length of the cache lines
-		add	r2, r2, #4		@ add 4 (line length offset)
-		ldr	r4, =0x3ff
-		ands	r4, r4, r1, lsr #3	@ find maximum number on the way size
-		clz	r5, r4			@ find bit position of way size increment
-		ldr	r7, =0x7fff
-		ands	r7, r7, r1, lsr #13	@ extract max number of the index size
-loop2:
-		mov	r9, r4			@ create working copy of max way size
-loop3:
- ARM(		orr	r11, r10, r9, lsl r5	) @ factor way and cache number into r11
- ARM(		orr	r11, r11, r7, lsl r2	) @ factor index number into r11
- THUMB(		lsl	r6, r9, r5		)
- THUMB(		orr	r11, r10, r6		) @ factor way and cache number into r11
- THUMB(		lsl	r6, r7, r2		)
- THUMB(		orr	r11, r11, r6		) @ factor index number into r11
-		mcr	p15, 0, r11, c7, c14, 2	@ clean & invalidate by set/way
-		subs	r9, r9, #1		@ decrement the way
-		bge	loop3
-		subs	r7, r7, #1		@ decrement the index
-		bge	loop2
-skip:
-		add	r10, r10, #2		@ increment cache number
-		cmp	r3, r10
-		bgt	loop1
-finished:
-		ldmfd	sp!, {r0-r7, r9-r11}
-		mov	r10, #0			@ switch back to cache level 0
-		mcr	p15, 2, r10, c0, c0, 0	@ select current cache level in cssr
+		dcache_line_size r1, r2		@ r1 := dcache min line size
+		sub	r2, r1, #1		@ r2 := line size mask
+		bic	r0, r0, r2		@ round down start to line size
+		sub	r11, r11, #1		@ end address is exclusive
+		bic	r11, r11, r2		@ round down end to line size
+0:		cmp	r0, r11			@ finished?
+		bgt	iflush
+		mcr	p15, 0, r0, c7, c14, 1	@ Dcache clean/invalidate by VA
+		add	r0, r0, r1
+		b	0b
 iflush:
 		mcr	p15, 0, r10, c7, c10, 4	@ DSB
 		mcr	p15, 0, r10, c7, c5, 0	@ invalidate I+BTB
@@ -1454,7 +1450,8 @@
 		@ running beyond the PoU, and so calling cache_off below from
 		@ inside the PE/COFF loader allocated region is unsafe unless
 		@ we explicitly clean it to the PoC.
-		adr	r0, call_cache_fn		@ region of code we will
+ ARM(		adrl	r0, call_cache_fn	)
+ THUMB(		adr	r0, call_cache_fn	)	@ region of code we will
 		adr	r1, 0f				@ run with MMU off
 		bl	cache_clean_flush
 		bl	cache_off
diff --git a/arch/arm/boot/compressed/vmlinux.lds.S b/arch/arm/boot/compressed/vmlinux.lds.S
index fc7ed03..b247f39 100644
--- a/arch/arm/boot/compressed/vmlinux.lds.S
+++ b/arch/arm/boot/compressed/vmlinux.lds.S
@@ -36,7 +36,6 @@
     *(.start)
     *(.text)
     *(.text.*)
-    *(.fixup)
     *(.gnu.warning)
     *(.glue_7t)
     *(.glue_7)
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d6546d2..e8dd992 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -446,6 +446,10 @@
 	imx6dl-nitrogen6x.dtb \
 	imx6dl-phytec-mira-rdk-nand.dtb \
 	imx6dl-phytec-pbab01.dtb \
+	imx6dl-pico-dwarf.dtb \
+	imx6dl-pico-hobbit.dtb \
+	imx6dl-pico-nymph.dtb \
+	imx6dl-pico-pi.dtb \
 	imx6dl-rex-basic.dtb \
 	imx6dl-riotboard.dtb \
 	imx6dl-sabreauto.dtb \
@@ -529,6 +533,10 @@
 	imx6q-phytec-mira-rdk-emmc.dtb \
 	imx6q-phytec-mira-rdk-nand.dtb \
 	imx6q-phytec-pbab01.dtb \
+	imx6q-pico-dwarf.dtb \
+	imx6q-pico-hobbit.dtb \
+	imx6q-pico-nymph.dtb \
+	imx6q-pico-pi.dtb \
 	imx6q-pistachio.dtb \
 	imx6q-rex-pro.dtb \
 	imx6q-sabreauto.dtb \
@@ -594,6 +602,7 @@
 	imx6ul-kontron-n6310-s-43.dtb \
 	imx6ul-liteboard.dtb \
 	imx6ul-opos6uldev.dtb \
+	imx6ul-pico-dwarf.dtb \
 	imx6ul-pico-hobbit.dtb \
 	imx6ul-pico-pi.dtb \
 	imx6ul-phytec-segin-ff-rdk-nand.dtb \
@@ -610,12 +619,16 @@
 	imx6ulz-14x14-evk.dtb
 dtb-$(CONFIG_SOC_IMX7D) += \
 	imx7d-cl-som-imx7.dtb \
+	imx7d-colibri-aster.dtb \
+	imx7d-colibri-emmc-aster.dtb \
 	imx7d-colibri-emmc-eval-v3.dtb \
 	imx7d-colibri-eval-v3.dtb \
 	imx7d-mba7.dtb \
 	imx7d-meerkat96.dtb \
 	imx7d-nitrogen7.dtb \
+	imx7d-pico-dwarf.dtb \
 	imx7d-pico-hobbit.dtb \
+	imx7d-pico-nymph.dtb \
 	imx7d-pico-pi.dtb \
 	imx7d-sbc-imx7.dtb \
 	imx7d-sdb.dtb \
@@ -623,6 +636,7 @@
 	imx7d-sdb-sht11.dtb \
 	imx7d-zii-rmu2.dtb \
 	imx7d-zii-rpu2.dtb \
+	imx7s-colibri-aster.dtb \
 	imx7s-colibri-eval-v3.dtb \
 	imx7s-mba7.dtb \
 	imx7s-warp.dtb
@@ -1016,6 +1030,7 @@
 	stm32h743i-disco.dtb \
 	stm32mp157a-avenger96.dtb \
 	stm32mp157a-dk1.dtb \
+	stm32mp157c-dhcom-pdk2.dtb \
 	stm32mp157c-dk2.dtb \
 	stm32mp157c-ed1.dtb \
 	stm32mp157c-ev1.dtb
@@ -1056,6 +1071,7 @@
 	sun5i-a13-licheepi-one.dtb \
 	sun5i-a13-olinuxino.dtb \
 	sun5i-a13-olinuxino-micro.dtb \
+	sun5i-a13-pocketbook-touch-lux-3.dtb \
 	sun5i-a13-q8-tablet.dtb \
 	sun5i-a13-utoo-p66.dtb \
 	sun5i-gr8-chip-pro.dtb \
@@ -1086,6 +1102,7 @@
 	sun7i-a20-i12-tvbox.dtb \
 	sun7i-a20-icnova-swac.dtb \
 	sun7i-a20-lamobo-r1.dtb \
+	sun7i-a20-linutronix-testbox-v2.dtb \
 	sun7i-a20-m3.dtb \
 	sun7i-a20-mk808c.dtb \
 	sun7i-a20-olimex-som-evb.dtb \
@@ -1202,7 +1219,8 @@
 	ste-hrefv60plus-stuib.dtb \
 	ste-hrefv60plus-tvk.dtb \
 	ste-href520-tvk.dtb \
-	ste-ux500-samsung-golden.dtb
+	ste-ux500-samsung-golden.dtb \
+	ste-ux500-samsung-skomer.dtb
 dtb-$(CONFIG_ARCH_UNIPHIER) += \
 	uniphier-ld4-ref.dtb \
 	uniphier-ld6b-ref.dtb \
diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi
index 4e2986f..5ed7f3c 100644
--- a/arch/arm/boot/dts/am33xx-l4.dtsi
+++ b/arch/arm/boot/dts/am33xx-l4.dtsi
@@ -759,12 +759,27 @@ target-module@200000 {			/* 0x4a200000, ap 7 02.0 */
 			ranges = <0x0 0x200000 0x80000>;
 		};
 
-		target-module@300000 {			/* 0x4a300000, ap 9 04.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
+		pruss_tm: target-module@300000 {	/* 0x4a300000, ap 9 04.0 */
+			compatible = "ti,sysc-pruss", "ti,sysc";
+			reg = <0x326000 0x4>,
+			      <0x326004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT |
+					 SYSC_PRUSS_SUB_MWAIT)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&pruss_ocp_clkctrl AM3_PRUSS_OCP_PRUSS_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_per 1>;
+			reset-names = "rstctrl";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x300000 0x80000>;
+			status = "disabled";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 41dcfb3..a35f5052 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -47,6 +47,7 @@ cpus {
 		#size-cells = <0>;
 		cpu@0 {
 			compatible = "arm,cortex-a8";
+			enable-method = "ti,am3352";
 			device_type = "cpu";
 			reg = <0>;
 
@@ -56,6 +57,17 @@ cpu@0 {
 			clock-names = "cpu";
 
 			clock-latency = <300000>; /* From omap-cpufreq driver */
+			cpu-idle-states = <&mpu_gate>;
+		};
+
+		idle-states {
+			mpu_gate: mpu_gate {
+				compatible = "arm,idle-state";
+				entry-latency-us = <40>;
+				exit-latency-us = <90>;
+				min-residency-us = <300>;
+				ti,idle-wkup-m3;
+			};
 		};
 	};
 
@@ -193,45 +205,100 @@ intc: interrupt-controller@48200000 {
 			reg = <0x48200000 0x1000>;
 		};
 
-		edma: edma@49000000 {
-			compatible = "ti,edma3-tpcc";
-			ti,hwmods = "tpcc";
-			reg =	<0x49000000 0x10000>;
-			reg-names = "edma3_cc";
-			interrupts = <12 13 14>;
-			interrupt-names = "edma3_ccint", "edma3_mperr",
-					  "edma3_ccerrint";
-			dma-requests = <64>;
-			#dma-cells = <2>;
+		target-module@49000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49000000 0x4>;
+			reg-names = "rev";
+			clocks = <&l3_clkctrl AM3_L3_TPCC_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49000000 0x10000>;
 
-			ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
-				   <&edma_tptc2 0>;
+			edma: dma@0 {
+				compatible = "ti,edma3-tpcc";
+				reg = <0 0x10000>;
+				reg-names = "edma3_cc";
+				interrupts = <12 13 14>;
+				interrupt-names = "edma3_ccint", "edma3_mperr",
+						  "edma3_ccerrint";
+				dma-requests = <64>;
+				#dma-cells = <2>;
 
-			ti,edma-memcpy-channels = <20 21>;
+				ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
+					   <&edma_tptc2 0>;
+
+				ti,edma-memcpy-channels = <20 21>;
+			};
 		};
 
-		edma_tptc0: tptc@49800000 {
-			compatible = "ti,edma3-tptc";
-			ti,hwmods = "tptc0";
-			reg =	<0x49800000 0x100000>;
-			interrupts = <112>;
-			interrupt-names = "edma3_tcerrint";
+		target-module@49800000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49800000 0x4>,
+			      <0x49800010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&l3_clkctrl AM3_L3_TPTC0_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49800000 0x100000>;
+
+			edma_tptc0: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <112>;
+				interrupt-names = "edma3_tcerrint";
+			};
 		};
 
-		edma_tptc1: tptc@49900000 {
-			compatible = "ti,edma3-tptc";
-			ti,hwmods = "tptc1";
-			reg =	<0x49900000 0x100000>;
-			interrupts = <113>;
-			interrupt-names = "edma3_tcerrint";
+		target-module@49900000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49900000 0x4>,
+			      <0x49900010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&l3_clkctrl AM3_L3_TPTC1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49900000 0x100000>;
+
+			edma_tptc1: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <113>;
+				interrupt-names = "edma3_tcerrint";
+			};
 		};
 
-		edma_tptc2: tptc@49a00000 {
-			compatible = "ti,edma3-tptc";
-			ti,hwmods = "tptc2";
-			reg =	<0x49a00000 0x100000>;
-			interrupts = <114>;
-			interrupt-names = "edma3_tcerrint";
+		target-module@49a00000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49a00000 0x4>,
+			      <0x49a00010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&l3_clkctrl AM3_L3_TPTC2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49a00000 0x100000>;
+
+			edma_tptc2: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <114>;
+				interrupt-names = "edma3_tcerrint";
+			};
 		};
 
 		target-module@47810000 {
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index faa14dc..dba87bf 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -45,6 +45,7 @@ cpus {
 		#size-cells = <0>;
 		cpu: cpu@0 {
 			compatible = "arm,cortex-a9";
+			enable-method = "ti,am4372";
 			device_type = "cpu";
 			reg = <0>;
 
@@ -54,6 +55,17 @@ cpu: cpu@0 {
 			operating-points-v2 = <&cpu0_opp_table>;
 
 			clock-latency = <300000>; /* From omap-cpufreq driver */
+			cpu-idle-states = <&mpu_gate>;
+		};
+
+		idle-states {
+			mpu_gate: mpu_gate {
+				compatible = "arm,idle-state";
+				entry-latency-us = <40>;
+				exit-latency-us = <100>;
+				min-residency-us = <300>;
+				local-timer-stop;
+			};
 		};
 	};
 
@@ -185,47 +197,102 @@ emif: emif@4c000000 {
 				&pm_sram_data>;
 		};
 
-		edma: edma@49000000 {
-			compatible = "ti,edma3-tpcc";
-			ti,hwmods = "tpcc";
-			reg =	<0x49000000 0x10000>;
-			reg-names = "edma3_cc";
-			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "edma3_ccint", "edma3_mperr",
-					  "edma3_ccerrint";
-			dma-requests = <64>;
-			#dma-cells = <2>;
+		target-module@49000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49000000 0x4>;
+			reg-names = "rev";
+			clocks = <&l3_clkctrl AM4_L3_TPCC_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49000000 0x10000>;
 
-			ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
-				   <&edma_tptc2 0>;
+			edma: dma@0 {
+				compatible = "ti,edma3-tpcc";
+				reg = <0 0x10000>;
+				reg-names = "edma3_cc";
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "edma3_ccint", "edma3_mperr",
+						  "edma3_ccerrint";
+				dma-requests = <64>;
+				#dma-cells = <2>;
 
-			ti,edma-memcpy-channels = <58 59>;
+				ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
+					   <&edma_tptc2 0>;
+
+				ti,edma-memcpy-channels = <58 59>;
+			};
 		};
 
-		edma_tptc0: tptc@49800000 {
-			compatible = "ti,edma3-tptc";
-			ti,hwmods = "tptc0";
-			reg =	<0x49800000 0x100000>;
-			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "edma3_tcerrint";
+		target-module@49800000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49800000 0x4>,
+			      <0x49800010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&l3_clkctrl AM4_L3_TPTC0_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49800000 0x100000>;
+
+			edma_tptc0: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "edma3_tcerrint";
+			};
 		};
 
-		edma_tptc1: tptc@49900000 {
-			compatible = "ti,edma3-tptc";
-			ti,hwmods = "tptc1";
-			reg =	<0x49900000 0x100000>;
-			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "edma3_tcerrint";
+		target-module@49900000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49900000 0x4>,
+			      <0x49900010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&l3_clkctrl AM4_L3_TPTC1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49900000 0x100000>;
+
+			edma_tptc1: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "edma3_tcerrint";
+			};
 		};
 
-		edma_tptc2: tptc@49a00000 {
-			compatible = "ti,edma3-tptc";
-			ti,hwmods = "tptc2";
-			reg =	<0x49a00000 0x100000>;
-			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "edma3_tcerrint";
+		target-module@49a00000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49a00000 0x4>,
+			      <0x49a00010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&l3_clkctrl AM4_L3_TPTC2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49a00000 0x100000>;
+
+			edma_tptc2: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "edma3_tcerrint";
+			};
 		};
 
 		target-module@47810000 {
@@ -344,6 +411,28 @@ des: des@0 {
 			};
 		};
 
+		pruss_tm: target-module@54400000 {
+			compatible = "ti,sysc-pruss", "ti,sysc";
+			reg = <0x54426000 0x4>,
+			      <0x54426004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT |
+					 SYSC_PRUSS_SUB_MWAIT)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&pruss_ocp_clkctrl AM4_PRUSS_OCP_PRUSS_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_per 1>;
+			reset-names = "rstctrl";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x54400000 0x80000>;
+		};
+
 		gpmc: gpmc@50000000 {
 			compatible = "ti,am3352-gpmc";
 			ti,hwmods = "gpmc";
@@ -394,38 +483,6 @@ qspi: spi@0 {
 			};
 		};
 
-		dss: dss@4832a000 {
-			compatible = "ti,omap3-dss";
-			reg = <0x4832a000 0x200>;
-			status = "disabled";
-			ti,hwmods = "dss_core";
-			clocks = <&disp_clk>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			dispc: dispc@4832a400 {
-				compatible = "ti,omap3-dispc";
-				reg = <0x4832a400 0x400>;
-				interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
-				ti,hwmods = "dss_dispc";
-				clocks = <&disp_clk>;
-				clock-names = "fck";
-
-				max-memory-bandwidth = <230000000>;
-			};
-
-			rfbi: rfbi@4832a800 {
-				compatible = "ti,omap3-rfbi";
-				reg = <0x4832a800 0x100>;
-				ti,hwmods = "dss_rfbi";
-				clocks = <&disp_clk>;
-				clock-names = "fck";
-				status = "disabled";
-			};
-		};
-
 		ocmcram: sram@40300000 {
 			compatible = "mmio-sram";
 			reg = <0x40300000 0x40000>; /* 256k */
diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi
index e18e17d..49c6a87 100644
--- a/arch/arm/boot/dts/am437x-l4.dtsi
+++ b/arch/arm/boot/dts/am437x-l4.dtsi
@@ -2117,7 +2117,6 @@ vpfe1: vpfe@0 {
 
 		target-module@2a000 {			/* 0x4832a000, ap 88 3c.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "dss_core";
 			reg = <0x2a000 0x4>,
 			      <0x2a010 0x4>,
 			      <0x2a014 0x4>;
@@ -2135,6 +2134,82 @@ target-module@2a000 {			/* 0x4832a000, ap 88 3c.0 */
 				 <0x00000800 0x0002a800 0x00000400>,
 				 <0x00000c00 0x0002ac00 0x00000400>,
 				 <0x00001000 0x0002b000 0x00001000>;
+
+			dss: dss@0 {
+				compatible = "ti,omap3-dss";
+				reg = <0 0x200>;
+				status = "disabled";
+				clocks = <&disp_clk>;
+				clock-names = "fck";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x00000000 0x00000000 0x00000400>,
+					 <0x00000400 0x00000400 0x00000400>,
+					 <0x00000800 0x00000800 0x00000400>,
+					 <0x00000c00 0x00000c00 0x00000400>,
+					 <0x00001000 0x00001000 0x00001000>;
+
+				target-module@400 {
+					compatible = "ti,sysc-omap2", "ti,sysc";
+					reg = <0x400 0x4>,
+					      <0x410 0x4>,
+					      <0x414 0x4>;
+					reg-names = "rev", "sysc", "syss";
+					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-midle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+							 SYSC_OMAP2_ENAWAKEUP |
+							 SYSC_OMAP2_SOFTRESET |
+							 SYSC_OMAP2_AUTOIDLE)>;
+					ti,syss-mask = <1>;
+					clocks = <&dss_clkctrl AM4_DSS_DSS_CORE_CLKCTRL 0>;
+					clock-names = "fck";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x400 0x400>;
+
+					dispc: dispc@0 {
+						compatible = "ti,omap3-dispc";
+						reg = <0 0x400>;
+						interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+						clocks = <&disp_clk>;
+						clock-names = "fck";
+
+						max-memory-bandwidth = <230000000>;
+					};
+				};
+
+				target-module@800 {
+					compatible = "ti,sysc-omap2", "ti,sysc";
+					reg = <0x800 0x4>,
+					      <0x810 0x4>,
+					      <0x814 0x4>;
+					reg-names = "rev", "sysc", "syss";
+					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+							 SYSC_OMAP2_AUTOIDLE)>;
+					ti,syss-mask = <1>;
+					clocks = <&dss_clkctrl AM4_DSS_DSS_CORE_CLKCTRL 0>;
+					clock-names = "fck";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x800 0x400>;
+
+					rfbi: rfbi@0 {
+						compatible = "ti,omap3-rfbi";
+						reg = <0 0x100>;
+						clocks = <&dss_clkctrl AM4_DSS_DSS_CORE_CLKCTRL 0>;
+						clock-names = "fck";
+						status = "disabled";
+					};
+				};
+			};
 		};
 
 		target-module@3d000 {			/* 0x4833d000, ap 102 6e.0 */
diff --git a/arch/arm/boot/dts/am57-pruss.dtsi b/arch/arm/boot/dts/am57-pruss.dtsi
new file mode 100644
index 0000000..b1c583d
--- /dev/null
+++ b/arch/arm/boot/dts/am57-pruss.dtsi
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Common PRUSS data for TI AM57xx platforms
+ */
+
+&ocp {
+	pruss1_tm: target-module@4b226000 {
+		compatible = "ti,sysc-pruss", "ti,sysc";
+		reg = <0x4b226000 0x4>,
+		      <0x4b226004 0x4>;
+		reg-names = "rev", "sysc";
+		ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT |
+				 SYSC_PRUSS_SUB_MWAIT)>;
+		ti,sysc-midle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>,
+				<SYSC_IDLE_SMART>;
+		ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>,
+				<SYSC_IDLE_SMART>;
+		/* Domains (P, C): coreaon_pwrdm, l4per2_clkdm */
+		clocks = <&l4per2_clkctrl DRA7_L4PER2_PRUSS1_CLKCTRL 0>;
+		clock-names = "fck";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x4b200000 0x80000>;
+	};
+
+	pruss2_tm: target-module@4b2a6000 {
+		compatible = "ti,sysc-pruss", "ti,sysc";
+		reg = <0x4b2a6000 0x4>,
+		      <0x4b2a6004 0x4>;
+		reg-names = "rev", "sysc";
+		ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT |
+				 SYSC_PRUSS_SUB_MWAIT)>;
+		ti,sysc-midle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>,
+				<SYSC_IDLE_SMART>;
+		ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>,
+				<SYSC_IDLE_SMART>;
+		/* Domains (P, C): coreaon_pwrdm, l4per2_clkdm */
+		clocks = <&l4per2_clkctrl DRA7_L4PER2_PRUSS2_CLKCTRL 0>;
+		clock-names = "fck";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x4b280000 0x80000>;
+	};
+};
diff --git a/arch/arm/boot/dts/am5718.dtsi b/arch/arm/boot/dts/am5718.dtsi
index d51007c..a80c2e3 100644
--- a/arch/arm/boot/dts/am5718.dtsi
+++ b/arch/arm/boot/dts/am5718.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include "dra72x.dtsi"
+#include "am57-pruss.dtsi"
 
 / {
 	compatible = "ti,am5718", "ti,dra7";
diff --git a/arch/arm/boot/dts/am5728.dtsi b/arch/arm/boot/dts/am5728.dtsi
index 82e5427..9a3810f 100644
--- a/arch/arm/boot/dts/am5728.dtsi
+++ b/arch/arm/boot/dts/am5728.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include "dra74x.dtsi"
+#include "am57-pruss.dtsi"
 
 / {
 	compatible = "ti,am5728", "ti,dra7";
diff --git a/arch/arm/boot/dts/am5748.dtsi b/arch/arm/boot/dts/am5748.dtsi
index 5e129759..2b65317 100644
--- a/arch/arm/boot/dts/am5748.dtsi
+++ b/arch/arm/boot/dts/am5748.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include "dra76x.dtsi"
+#include "am57-pruss.dtsi"
 
 / {
 	compatible = "ti,am5748", "ti,dra762", "ti,dra7";
diff --git a/arch/arm/boot/dts/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm-realview-pbx.dtsi
index 09f3f54..f61bd59 100644
--- a/arch/arm/boot/dts/arm-realview-pbx.dtsi
+++ b/arch/arm/boot/dts/arm-realview-pbx.dtsi
@@ -210,7 +210,7 @@ vga_con_in: endpoint {
 		};
 	};
 
-	soc: soc@0 {
+	soc: soc {
 		compatible = "arm,realview-pbx-soc", "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi b/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi
index df0f0cc..bea920b 100644
--- a/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi
+++ b/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi
@@ -17,7 +17,7 @@ backlight: backlight {
 	};
 
 	panel: panel {
-		compatible = "winstar,wf70gtiagdng0", "innolux,at070tn92", "simple-panel";
+		compatible = "winstar,wf70gtiagdng0", "innolux,at070tn92";
 		backlight = <&backlight>;
 		power-supply = <&vcc_lcd_reg>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts
index 9f30132..b484745 100644
--- a/arch/arm/boot/dts/at91-sam9x60ek.dts
+++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
@@ -645,3 +645,8 @@ &pioD 15 GPIO_ACTIVE_HIGH
 &usb2 {
 	status = "okay";
 };
+
+&watchdog {
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
index 0b9fa29..6b84612 100644
--- a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
@@ -186,6 +186,11 @@ pinctrl_usb_default: usb_default {
 		pinmux = <PIN_PA10__GPIO>;
 		bias-disable;
 	};
+
+	pinctrl_usba_vbus: usba_vbus {
+		pinmux = <PIN_PA16__GPIO>;
+		bias-disable;
+	};
 };
 
 &pwm0 {
@@ -248,6 +253,13 @@ &uart3 {
 	status = "okay";
 };
 
+&usb0 {
+	atmel,vbus-gpio = <&pioA PIN_PA16 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	status = "okay";
+};
+
 &usb1 {
 	num-ports = <3>;
 	atmel,vbus-gpio = <0
diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
index ba7f3e6..1c24ac8 100644
--- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
@@ -180,8 +180,11 @@ uart2: serial@f8024000 {
 
 			i2c0: i2c@f8028000 {
 				dmas = <0>, <0>;
-				pinctrl-names = "default";
+				pinctrl-names = "default", "gpio";
 				pinctrl-0 = <&pinctrl_i2c0_default>;
+				pinctrl-1 = <&pinctrl_i2c0_gpio>;
+				sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PD22 GPIO_ACTIVE_HIGH>;
 				status = "okay";
 			};
 
@@ -198,8 +201,11 @@ i2c2: i2c@600 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
-					pinctrl-names = "default";
+					pinctrl-names = "default", "gpio";
 					pinctrl-0 = <&pinctrl_flx0_default>;
+					pinctrl-1 = <&pinctrl_flx0_gpio>;
+					sda-gpios = <&pioA PIN_PB28 GPIO_ACTIVE_HIGH>;
+					scl-gpios = <&pioA PIN_PB29 GPIO_ACTIVE_HIGH>;
 					atmel,fifo-size = <16>;
 					status = "okay";
 				};
@@ -226,8 +232,11 @@ spi1: spi@fc000000 {
 
 			i2c1: i2c@fc028000 {
 				dmas = <0>, <0>;
-				pinctrl-names = "default";
+				pinctrl-names = "default", "gpio";
 				pinctrl-0 = <&pinctrl_i2c1_default>;
+				pinctrl-1 = <&pinctrl_i2c1_gpio>;
+				sda-gpios = <&pioA PIN_PC6 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PC7 GPIO_ACTIVE_HIGH>;
 				status = "okay";
 
 				at24@50 {
@@ -244,18 +253,36 @@ pinctrl_flx0_default: flx0_default {
 					bias-disable;
 				};
 
+				pinctrl_flx0_gpio: flx0_gpio {
+					pinmux = <PIN_PB28__GPIO>,
+						 <PIN_PB29__GPIO>;
+					bias-disable;
+				};
+
 				pinctrl_i2c0_default: i2c0_default {
 					pinmux = <PIN_PD21__TWD0>,
 						 <PIN_PD22__TWCK0>;
 					bias-disable;
 				};
 
+				pinctrl_i2c0_gpio: i2c0_gpio {
+					pinmux = <PIN_PD21__GPIO>,
+						 <PIN_PD22__GPIO>;
+					bias-disable;
+				};
+
 				pinctrl_i2c1_default: i2c1_default {
 					pinmux = <PIN_PC6__TWD1>,
 						 <PIN_PC7__TWCK1>;
 					bias-disable;
 				};
 
+				pinctrl_i2c1_gpio: i2c1_gpio {
+					pinmux = <PIN_PC6__GPIO>,
+						 <PIN_PC7__GPIO>;
+					bias-disable;
+				};
+
 				pinctrl_key_gpio_default: key_gpio_default {
 					pinmux = <PIN_PA10__GPIO>;
 					bias-pull-up;
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index 9d0a7fb..055ee53 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -129,8 +129,11 @@ uart1: serial@f8020000 {
 
 			i2c0: i2c@f8028000 {
 				dmas = <0>, <0>;
-				pinctrl-names = "default";
+				pinctrl-names = "default", "gpio";
 				pinctrl-0 = <&pinctrl_i2c0_default>;
+				pinctrl-1 = <&pinctrl_i2c0_gpio>;
+				sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PD22 GPIO_ACTIVE_HIGH>;
 				i2c-sda-hold-time-ns = <350>;
 				status = "okay";
 
@@ -331,8 +334,11 @@ i2c2: i2c@600 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
-					pinctrl-names = "default";
+					pinctrl-names = "default", "gpio";
 					pinctrl-0 = <&pinctrl_flx4_default>;
+					pinctrl-1 = <&pinctrl_flx4_gpio>;
+					sda-gpios = <&pioA PIN_PD12 GPIO_ACTIVE_HIGH>;
+					scl-gpios = <&pioA PIN_PD13 GPIO_ACTIVE_HIGH>;
 					atmel,fifo-size = <16>;
 					i2c-analog-filter;
 					i2c-digital-filter;
@@ -343,11 +349,14 @@ i2c2: i2c@600 {
 
 			i2c1: i2c@fc028000 {
 				dmas = <0>, <0>;
-				pinctrl-names = "default";
+				pinctrl-names = "default", "gpio";
 				pinctrl-0 = <&pinctrl_i2c1_default>;
 				i2c-analog-filter;
 				i2c-digital-filter;
 				i2c-digital-filter-width-ns = <35>;
+				pinctrl-1 = <&pinctrl_i2c1_gpio>;
+				sda-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PD5 GPIO_ACTIVE_HIGH>;
 				status = "okay";
 
 				at24@54 {
@@ -441,18 +450,36 @@ pinctrl_flx4_default: flx4_default {
 					bias-disable;
 				};
 
+				pinctrl_flx4_gpio: flx4_gpio {
+					pinmux = <PIN_PD12__GPIO>,
+						 <PIN_PD13__GPIO>;
+					bias-disable;
+				};
+
 				pinctrl_i2c0_default: i2c0_default {
 					pinmux = <PIN_PD21__TWD0>,
 						 <PIN_PD22__TWCK0>;
 					bias-disable;
 				};
 
+				pinctrl_i2c0_gpio: i2c0_gpio {
+					pinmux = <PIN_PD21__GPIO>,
+						 <PIN_PD22__GPIO>;
+					bias-disable;
+				};
+
 				pinctrl_i2c1_default: i2c1_default {
 					pinmux = <PIN_PD4__TWD1>,
 						 <PIN_PD5__TWCK1>;
 					bias-disable;
 				};
 
+				pinctrl_i2c1_gpio: i2c1_gpio {
+					pinmux = <PIN_PD4__GPIO>,
+						 <PIN_PD5__GPIO>;
+					bias-disable;
+				};
+
 				pinctrl_i2s0_default: i2s0_default {
 					pinmux = <PIN_PC1__I2SC0_CK>,
 						 <PIN_PC2__I2SC0_MCK>,
diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts
index af49694..4d7cee5 100644
--- a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts
+++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts
@@ -136,7 +136,7 @@ user3 {
 
 	panel: panel {
 		/* Actually Ampire 800480R2 */
-		compatible = "foxlink,fl500wvr00-a0t", "simple-panel";
+		compatible = "foxlink,fl500wvr00-a0t";
 		backlight = <&backlight>;
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
index ea5cef0..d36e162 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -238,7 +238,7 @@ enter {
 	};
 
 	panel: panel {
-		compatible = "qiaodian,qd43003c0-40", "simple-panel";
+		compatible = "qiaodian,qd43003c0-40";
 		backlight = <&backlight>;
 		power-supply = <&panel_reg>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/at91sam9x5dm.dtsi b/arch/arm/boot/dts/at91sam9x5dm.dtsi
index 7f00c1f..a927803 100644
--- a/arch/arm/boot/dts/at91sam9x5dm.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5dm.dtsi
@@ -27,7 +27,7 @@ bl_reg: backlight_regulator {
 	};
 
 	panel: panel {
-		compatible = "foxlink,fl500wvr00-a0t", "simple-panel";
+		compatible = "foxlink,fl500wvr00-a0t";
 		backlight = <&backlight>;
 		power-supply = <&panel_reg>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
index efea891..e26ea90 100644
--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
@@ -20,6 +20,7 @@ memory@0 {
 	};
 
 	aliases {
+		emmc2bus = &emmc2bus;
 		ethernet0 = &genet;
 		pcie0 = &pcie0;
 	};
@@ -74,6 +75,79 @@ expgpio: gpio {
 	};
 };
 
+&gpio {
+	/*
+	 * Parts taken from rpi_SCH_4b_4p0_reduced.pdf and
+	 * the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD1",
+			  "RXD1",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "RGMII_MDIO",
+			  "RGMIO_MDC",
+			  /* Used by BT module */
+			  "CTS0",
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
+			  /* Shared with SPI flash */
+			  "PWM0_MISO",
+			  "PWM1_MOSI",
+			  "STATUS_LED_G_CLK",
+			  "SPIFLASH_CE_N",
+			  "SDA0",
+			  "SCL0",
+			  "RGMII_RXCLK",
+			  "RGMII_RXCTL",
+			  "RGMII_RXD0",
+			  "RGMII_RXD1",
+			  "RGMII_RXD2",
+			  "RGMII_RXD3",
+			  "RGMII_TXCLK",
+			  "RGMII_TXCTL",
+			  "RGMII_TXD0",
+			  "RGMII_TXD1",
+			  "RGMII_TXD2",
+			  "RGMII_TXD3";
+};
+
 &pwm1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>;
diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index d1e684d..a91cf68 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -241,17 +241,32 @@ pwm1: pwm@7e20c800 {
 			status = "disabled";
 		};
 
+		hvs@7e400000 {
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	/*
+	 * emmc2 has different DMA constraints based on SoC revisions. It was
+	 * moved into its own bus, so as for RPi4's firmware to update them.
+	 * The firmware will find whether the emmc2bus alias is defined, and if
+	 * so, it'll edit the dma-ranges property below accordingly.
+	 */
+	emmc2bus: emmc2bus {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		ranges = <0x0 0x7e000000  0x0 0xfe000000  0x01800000>;
+		dma-ranges = <0x0 0xc0000000  0x0 0x00000000  0x40000000>;
+
 		emmc2: emmc2@7e340000 {
 			compatible = "brcm,bcm2711-emmc2";
-			reg = <0x7e340000 0x100>;
+			reg = <0x0 0x7e340000 0x100>;
 			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clocks BCM2711_CLOCK_EMMC2>;
 			status = "disabled";
 		};
-
-		hvs@7e400000 {
-			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-		};
 	};
 
 	arm-pmu {
diff --git a/arch/arm/boot/dts/dm814x-clocks.dtsi b/arch/arm/boot/dts/dm814x-clocks.dtsi
index e5e4d0a..f7939f4 100644
--- a/arch/arm/boot/dts/dm814x-clocks.dtsi
+++ b/arch/arm/boot/dts/dm814x-clocks.dtsi
@@ -362,4 +362,18 @@ alwon_clkctrl: clk@0 {
 			#clock-cells = <2>;
 		};
 	};
+
+	alwon_ethernet_cm: alwon_ethernet_cm@15d4 {
+		compatible = "ti,omap4-cm";
+		reg = <0x15d4 0x4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x15d4 0x4>;
+
+		alwon_ethernet_clkctrl: clk@0 {
+			compatible = "ti,clkctrl";
+			reg = <0 0x4>;
+			#clock-cells = <2>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi
index 95de9f2..44ed5a7 100644
--- a/arch/arm/boot/dts/dm814x.dtsi
+++ b/arch/arm/boot/dts/dm814x.dtsi
@@ -4,6 +4,8 @@
  * kind, whether express or implied.
  */
 
+#include <dt-bindings/bus/ti-sysc.h>
+#include <dt-bindings/clock/dm814.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/dm814x.h>
 
@@ -519,53 +521,123 @@ mmc3: mmc@47810000 {
 			reg = <0x47810000 0x1000>;
 		};
 
-		edma: edma@49000000 {
-			compatible = "ti,edma3-tpcc";
-			ti,hwmods = "tpcc";
-			reg =	<0x49000000 0x10000>;
-			reg-names = "edma3_cc";
-			interrupts = <12 13 14>;
-			interrupt-names = "edma3_ccint", "edma3_mperr",
-					  "edma3_ccerrint";
-			dma-requests = <64>;
-			#dma-cells = <2>;
+		target-module@49000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49000000 0x4>;
+			reg-names = "rev";
+			clocks = <&alwon_clkctrl DM814_TPCC_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49000000 0x10000>;
 
-			ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
-				   <&edma_tptc2 3>, <&edma_tptc3 0>;
+			edma: dma@0 {
+				compatible = "ti,edma3-tpcc";
+				reg = <0 0x10000>;
+				reg-names = "edma3_cc";
+				interrupts = <12 13 14>;
+				interrupt-names = "edma3_ccint", "edma3_mperr",
+						  "edma3_ccerrint";
+				dma-requests = <64>;
+				#dma-cells = <2>;
 
-			ti,edma-memcpy-channels = <20 21>;
+				ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
+					   <&edma_tptc2 3>, <&edma_tptc3 0>;
+
+				ti,edma-memcpy-channels = <20 21>;
+			};
 		};
 
-		edma_tptc0: tptc@49800000 {
-			compatible = "ti,edma3-tptc";
-			ti,hwmods = "tptc0";
-			reg =	<0x49800000 0x100000>;
-			interrupts = <112>;
-			interrupt-names = "edma3_tcerrint";
+		target-module@49800000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49800000 0x4>,
+			      <0x49800010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&alwon_clkctrl DM814_TPTC0_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49800000 0x100000>;
+
+			edma_tptc0: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <112>;
+				interrupt-names = "edma3_tcerrint";
+			};
 		};
 
-		edma_tptc1: tptc@49900000 {
-			compatible = "ti,edma3-tptc";
-			ti,hwmods = "tptc1";
-			reg =	<0x49900000 0x100000>;
-			interrupts = <113>;
-			interrupt-names = "edma3_tcerrint";
+		target-module@49900000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49900000 0x4>,
+			      <0x49900010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&alwon_clkctrl DM814_TPTC1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49900000 0x100000>;
+
+			edma_tptc1: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <113>;
+				interrupt-names = "edma3_tcerrint";
+			};
 		};
 
-		edma_tptc2: tptc@49a00000 {
-			compatible = "ti,edma3-tptc";
-			ti,hwmods = "tptc2";
-			reg =	<0x49a00000 0x100000>;
-			interrupts = <114>;
-			interrupt-names = "edma3_tcerrint";
+		target-module@49a00000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49a00000 0x4>,
+			      <0x49a00010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&alwon_clkctrl DM814_TPTC2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49a00000 0x100000>;
+
+			edma_tptc2: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <114>;
+				interrupt-names = "edma3_tcerrint";
+			};
 		};
 
-		edma_tptc3: tptc@49b00000 {
-			compatible = "ti,edma3-tptc";
-			ti,hwmods = "tptc3";
-			reg =	<0x49b00000 0x100000>;
-			interrupts = <115>;
-			interrupt-names = "edma3_tcerrint";
+		target-module@49b00000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49b00000 0x4>,
+			      <0x49b00010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&alwon_clkctrl DM814_TPTC3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49b00000 0x100000>;
+
+			edma_tptc3: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <115>;
+				interrupt-names = "edma3_tcerrint";
+			};
 		};
 
 		/* See TRM "Table 1-318. L4HS Instance Summary" */
@@ -574,57 +646,73 @@ l4hs: l4hs@4a000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x4a000000 0x1b4040>;
-		};
 
-		/* REVISIT: Move to live under l4hs once driver is fixed */
-		mac: ethernet@4a100000 {
-			compatible = "ti,cpsw";
-			ti,hwmods = "cpgmac0";
-			clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
-			clock-names = "fck", "cpts";
-			cpdma_channels = <8>;
-			ale_entries = <1024>;
-			bd_ram_size = <0x2000>;
-			mac_control = <0x20>;
-			slaves = <2>;
-			active_slave = <0>;
-			cpts_clock_mult = <0x80000000>;
-			cpts_clock_shift = <29>;
-			reg = <0x4a100000 0x800
-			       0x4a100900 0x100>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			interrupt-parent = <&intc>;
-			/*
-			 * c0_rx_thresh_pend
-			 * c0_rx_pend
-			 * c0_tx_pend
-			 * c0_misc_pend
-			 */
-			interrupts = <40 41 42 43>;
-			ranges;
-			syscon = <&scm_conf>;
-
-			davinci_mdio: mdio@4a100800 {
-				compatible = "ti,davinci_mdio";
+			target-module@100000 {
+				compatible = "ti,sysc-omap4-simple", "ti,sysc";
+				reg = <0x100900 0x4>,
+				      <0x100908 0x4>,
+				      <0x100904 0x4>;
+				reg-names = "rev", "sysc", "syss";
+				ti,sysc-mask = <0>;
+				ti,sysc-midle = <SYSC_IDLE_FORCE>,
+						<SYSC_IDLE_NO>;
+				ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+						<SYSC_IDLE_NO>;
+				ti,syss-mask = <1>;
+				clocks = <&alwon_ethernet_clkctrl DM814_ETHERNET_CPGMAC0_CLKCTRL 0>;
+				clock-names = "fck";
 				#address-cells = <1>;
-				#size-cells = <0>;
-				ti,hwmods = "davinci_mdio";
-				bus_freq = <1000000>;
-				reg = <0x4a100800 0x100>;
-			};
+				#size-cells = <1>;
+				ranges = <0 0x100000 0x8000>;
 
-			cpsw_emac0: slave@4a100200 {
-				/* Filled in by U-Boot */
-				mac-address = [ 00 00 00 00 00 00 ];
-				phys = <&phy_gmii_sel 1>;
+				mac: ethernet@0 {
+					compatible = "ti,cpsw";
+					clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
+					clock-names = "fck", "cpts";
+					cpdma_channels = <8>;
+					ale_entries = <1024>;
+					bd_ram_size = <0x2000>;
+					mac_control = <0x20>;
+					slaves = <2>;
+					active_slave = <0>;
+					cpts_clock_mult = <0x80000000>;
+					cpts_clock_shift = <29>;
+					reg = <0 0x800>,
+					      <0x900 0x100>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					/*
+					* c0_rx_thresh_pend
+					* c0_rx_pend
+					* c0_tx_pend
+					* c0_misc_pend
+					*/
+					interrupts = <40 41 42 43>;
+					ranges = <0 0 0x8000>;
+					syscon = <&scm_conf>;
 
-			};
+					davinci_mdio: mdio@800 {
+						compatible = "ti,cpsw-mdio", "ti,davinci_mdio";
+						clocks = <&alwon_ethernet_clkctrl DM814_ETHERNET_CPGMAC0_CLKCTRL 0>;
+						clock-names = "fck";
+						#address-cells = <1>;
+						#size-cells = <0>;
+						bus_freq = <1000000>;
+						reg = <0x800 0x100>;
+					};
 
-			cpsw_emac1: slave@4a100300 {
-				/* Filled in by U-Boot */
-				mac-address = [ 00 00 00 00 00 00 ];
-				phys = <&phy_gmii_sel 2>;
+					cpsw_emac0: slave@200 {
+						/* Filled in by U-Boot */
+						mac-address = [ 00 00 00 00 00 00 ];
+						phys = <&phy_gmii_sel 1>;
+					};
+
+					cpsw_emac1: slave@300 {
+						/* Filled in by U-Boot */
+						mac-address = [ 00 00 00 00 00 00 ];
+						phys = <&phy_gmii_sel 2>;
+					};
+				};
 			};
 		};
 
diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi
index 1edc2b4..2a4934b 100644
--- a/arch/arm/boot/dts/dm816x.dtsi
+++ b/arch/arm/boot/dts/dm816x.dtsi
@@ -4,6 +4,8 @@
  * kind, whether express or implied.
  */
 
+#include <dt-bindings/bus/ti-sysc.h>
+#include <dt-bindings/clock/dm816.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/omap.h>
 
@@ -138,13 +140,123 @@ scrm_clockdomains: clockdomains {
 			};
 		};
 
-		edma: edma@49000000 {
-			compatible = "ti,edma3";
-			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2", "tptc3";
-			reg =   <0x49000000 0x10000>,
-			        <0x44e10f90 0x40>;
-			interrupts = <12 13 14>;
-			#dma-cells = <1>;
+		target-module@49000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49000000 0x4>;
+			reg-names = "rev";
+			clocks = <&alwon_clkctrl DM816_TPCC_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49000000 0x10000>;
+
+			edma: dma@0 {
+				compatible = "ti,edma3-tpcc";
+				reg = <0 0x10000>;
+				reg-names = "edma3_cc";
+				interrupts = <12 13 14>;
+				interrupt-names = "edma3_ccint", "edma3_mperr",
+						  "edma3_ccerrint";
+				dma-requests = <64>;
+				#dma-cells = <2>;
+
+				ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
+					   <&edma_tptc2 3>, <&edma_tptc3 0>;
+
+				ti,edma-memcpy-channels = <20 21>;
+			};
+		};
+
+		target-module@49800000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49800000 0x4>,
+			      <0x49800010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&alwon_clkctrl DM816_TPTC0_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49800000 0x100000>;
+
+			edma_tptc0: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <112>;
+				interrupt-names = "edma3_tcerrint";
+			};
+		};
+
+		target-module@49900000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49900000 0x4>,
+			      <0x49900010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&alwon_clkctrl DM816_TPTC1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49900000 0x100000>;
+
+			edma_tptc1: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <113>;
+				interrupt-names = "edma3_tcerrint";
+			};
+		};
+
+		target-module@49a00000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49a00000 0x4>,
+			      <0x49a00010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&alwon_clkctrl DM816_TPTC2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49a00000 0x100000>;
+
+			edma_tptc2: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <114>;
+				interrupt-names = "edma3_tcerrint";
+			};
+		};
+
+		target-module@49b00000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49b00000 0x4>,
+			      <0x49b00010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&alwon_clkctrl DM816_TPTC3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49b00000 0x100000>;
+
+			edma_tptc3: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <115>;
+				interrupt-names = "edma3_tcerrint";
+			};
 		};
 
 		elm: elm@48080000 {
@@ -185,7 +297,7 @@ gpmc: gpmc@50000000 {
 			#address-cells = <2>;
 			#size-cells = <1>;
 			interrupts = <100>;
-			dmas = <&edma 52>;
+			dmas = <&edma 52 0>;
 			dma-names = "rxtx";
 			gpmc,num-cs = <6>;
 			gpmc,num-waitpins = <2>;
@@ -202,7 +314,7 @@ i2c1: i2c@48028000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <70>;
-			dmas = <&edma 58 &edma 59>;
+			dmas = <&edma 58 0 &edma 59 0>;
 			dma-names = "tx", "rx";
 		};
 
@@ -213,7 +325,7 @@ i2c2: i2c@4802a000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <71>;
-			dmas = <&edma 60 &edma 61>;
+			dmas = <&edma 60 0 &edma 61 0>;
 			dma-names = "tx", "rx";
 		};
 
@@ -311,10 +423,10 @@ mcspi1: spi@48030000 {
 			interrupts = <65>;
 			ti,spi-num-cs = <4>;
 			ti,hwmods = "mcspi1";
-			dmas = <&edma 16 &edma 17
-				&edma 18 &edma 19
-				&edma 20 &edma 21
-				&edma 22 &edma 23>;
+			dmas = <&edma 16 0 &edma 17 0
+				&edma 18 0 &edma 19 0
+				&edma 20 0 &edma 21 0
+				&edma 22 0 &edma 23 0>;
 			dma-names = "tx0", "rx0", "tx1", "rx1",
 				    "tx2", "rx2", "tx3", "rx3";
 		};
@@ -324,7 +436,7 @@ mmc1: mmc@48060000 {
 			reg = <0x48060000 0x11000>;
 			ti,hwmods = "mmc1";
 			interrupts = <64>;
-			dmas = <&edma 24 &edma 25>;
+			dmas = <&edma 24 0 &edma 25 0>;
 			dma-names = "tx", "rx";
 		};
 
@@ -392,7 +504,7 @@ uart1: uart@48020000 {
 			reg = <0x48020000 0x2000>;
 			clock-frequency = <48000000>;
 			interrupts = <72>;
-			dmas = <&edma 26 &edma 27>;
+			dmas = <&edma 26 0 &edma 27 0>;
 			dma-names = "tx", "rx";
 		};
 
@@ -402,7 +514,7 @@ uart2: uart@48022000 {
 			reg = <0x48022000 0x2000>;
 			clock-frequency = <48000000>;
 			interrupts = <73>;
-			dmas = <&edma 28 &edma 29>;
+			dmas = <&edma 28 0 &edma 29 0>;
 			dma-names = "tx", "rx";
 		};
 
@@ -412,7 +524,7 @@ uart3: uart@48024000 {
 			reg = <0x48024000 0x2000>;
 			clock-frequency = <48000000>;
 			interrupts = <74>;
-			dmas = <&edma 30 &edma 31>;
+			dmas = <&edma 30 0 &edma 31 0>;
 			dma-names = "tx", "rx";
 		};
 
diff --git a/arch/arm/boot/dts/dra62x.dtsi b/arch/arm/boot/dts/dra62x.dtsi
index d3cbb4e..cc4878a 100644
--- a/arch/arm/boot/dts/dra62x.dtsi
+++ b/arch/arm/boot/dts/dra62x.dtsi
@@ -12,12 +12,12 @@ / {
 
 /* Compared to dm814x, dra62x has different offsets for Ethernet */
 &mac {
-	reg = <0x4a100000 0x800
-		0x4a101200 0x100>;
+	reg = <0 0x800>,
+	      <0x1200 0x100>;
 };
 
 &davinci_mdio {
-	reg = <0x4a101000 0x100>;
+	reg = <0x1000 0x100>;
 };
 
 #include "dra62x-clocks.dtsi"
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 5f5ee16..4740989 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -143,7 +143,7 @@ mpu {
 	 * the moment, just use a fake OCP bus entry to represent the whole bus
 	 * hierarchy.
 	 */
-	ocp {
+	ocp: ocp {
 		compatible = "ti,dra7-l3-noc", "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -334,43 +334,73 @@ dra7_iodelay_core: padconf@4844a000 {
 			#pinctrl-cells = <2>;
 		};
 
-		edma: edma@43300000 {
-			compatible = "ti,edma3-tpcc";
-			ti,hwmods = "tpcc";
-			reg = <0x43300000 0x100000>;
-			reg-names = "edma3_cc";
-			interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "edma3_ccint", "edma3_mperr",
-					  "edma3_ccerrint";
-			dma-requests = <64>;
-			#dma-cells = <2>;
+		target-module@43300000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x43300000 0x4>;
+			reg-names = "rev";
+			clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPCC_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x43300000 0x100000>;
 
-			ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 0>;
+			edma: dma@0 {
+				compatible = "ti,edma3-tpcc";
+				reg = <0 0x100000>;
+				reg-names = "edma3_cc";
+				interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "edma3_ccint", "edma3_mperr",
+						  "edma3_ccerrint";
+				dma-requests = <64>;
+				#dma-cells = <2>;
 
-			/*
-			 * memcpy is disabled, can be enabled with:
-			 * ti,edma-memcpy-channels = <20 21>;
-			 * for example. Note that these channels need to be
-			 * masked in the xbar as well.
-			 */
+				ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 0>;
+
+				/*
+				* memcpy is disabled, can be enabled with:
+				* ti,edma-memcpy-channels = <20 21>;
+				* for example. Note that these channels need to be
+				* masked in the xbar as well.
+				*/
+			};
 		};
 
-		edma_tptc0: tptc@43400000 {
-			compatible = "ti,edma3-tptc";
-			ti,hwmods = "tptc0";
-			reg =	<0x43400000 0x100000>;
-			interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "edma3_tcerrint";
+		target-module@43400000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x43400000 0x4>;
+			reg-names = "rev";
+			clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPTC0_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x43400000 0x100000>;
+
+			edma_tptc0: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "edma3_tcerrint";
+			};
 		};
 
-		edma_tptc1: tptc@43500000 {
-			compatible = "ti,edma3-tptc";
-			ti,hwmods = "tptc1";
-			reg =	<0x43500000 0x100000>;
-			interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "edma3_tcerrint";
+		target-module@43500000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x43500000 0x4>;
+			reg-names = "rev";
+			clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPTC1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x43500000 0x100000>;
+
+			edma_tptc1: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "edma3_tcerrint";
+			};
 		};
 
 		dmm@4e000000 {
@@ -708,44 +738,99 @@ crossbar_mpu: crossbar@4a002a48 {
 			ti,irqs-safe-map = <0>;
 		};
 
-		dss: dss@58000000 {
-			compatible = "ti,dra7-dss";
-			/* 'reg' defined in dra72x.dtsi and dra74x.dtsi */
-			/* 'clocks' defined in dra72x.dtsi and dra74x.dtsi */
-			status = "disabled";
-			ti,hwmods = "dss_core";
-			/* CTRL_CORE_DSS_PLL_CONTROL */
-			syscon-pll-ctrl = <&scm_conf 0x538>;
+		target-module@58000000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x58000000 4>,
+			      <0x58000014 4>;
+			reg-names = "rev", "syss";
+			ti,syss-mask = <1>;
+			clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 0>,
+				 <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 9>,
+				 <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 10>,
+				 <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 11>;
+			clock-names = "fck", "hdmi_clk", "sys_clk", "tv_clk";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges;
+			ranges = <0 0x58000000 0x800000>;
 
-			dispc@58001000 {
-				compatible = "ti,dra7-dispc";
-				reg = <0x58001000 0x1000>;
-				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-				ti,hwmods = "dss_dispc";
-				clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>;
-				clock-names = "fck";
-				/* CTRL_CORE_SMA_SW_1 */
-				syscon-pol = <&scm_conf 0x534>;
-			};
-
-			hdmi: encoder@58060000 {
-				compatible = "ti,dra7-hdmi";
-				reg = <0x58040000 0x200>,
-				      <0x58040200 0x80>,
-				      <0x58040300 0x80>,
-				      <0x58060000 0x19000>;
-				reg-names = "wp", "pll", "phy", "core";
-				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			dss: dss@0 {
+				compatible = "ti,dra7-dss";
+				/* 'reg' defined in dra72x.dtsi and dra74x.dtsi */
+				/* 'clocks' defined in dra72x.dtsi and dra74x.dtsi */
 				status = "disabled";
-				ti,hwmods = "dss_hdmi";
-				clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>,
-					 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 10>;
-				clock-names = "fck", "sys_clk";
-				dmas = <&sdma_xbar 76>;
-				dma-names = "audio_tx";
+				/* CTRL_CORE_DSS_PLL_CONTROL */
+				syscon-pll-ctrl = <&scm_conf 0x538>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x800000>;
+
+				target-module@1000 {
+					compatible = "ti,sysc-omap2", "ti,sysc";
+					reg = <0x1000 0x4>,
+					      <0x1010 0x4>,
+					      <0x1014 0x4>;
+					reg-names = "rev", "sysc", "syss";
+					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-midle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+							 SYSC_OMAP2_ENAWAKEUP |
+							 SYSC_OMAP2_SOFTRESET |
+							 SYSC_OMAP2_AUTOIDLE)>;
+					ti,syss-mask = <1>;
+					clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 8>;
+					clock-names = "fck";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x1000 0x1000>;
+
+					dispc@0 {
+						compatible = "ti,dra7-dispc";
+						reg = <0 0x1000>;
+						interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+						clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>;
+						clock-names = "fck";
+						/* CTRL_CORE_SMA_SW_1 */
+						syscon-pol = <&scm_conf 0x534>;
+					};
+				};
+
+				target-module@40000 {
+					compatible = "ti,sysc-omap4", "ti,sysc";
+					reg = <0x40000 0x4>,
+					      <0x40010 0x4>;
+					reg-names = "rev", "sysc";
+					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>,
+							<SYSC_IDLE_SMART_WKUP>;
+					ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET)>;
+					clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 9>,
+						 <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 8>;
+					clock-names = "fck", "dss_clk";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x40000 0x40000>;
+
+					hdmi: encoder@0 {
+						compatible = "ti,dra7-hdmi";
+						reg = <0 0x200>,
+						      <0x200 0x80>,
+						      <0x300 0x80>,
+						      <0x20000 0x19000>;
+						reg-names = "wp", "pll", "phy", "core";
+						interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+						status = "disabled";
+						clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>,
+							 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 10>;
+						clock-names = "fck", "sys_clk";
+						dmas = <&sdma_xbar 76>;
+						dma-names = "audio_tx";
+					};
+				};
 			};
 		};
 
diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi
index 82b57a3..da33448 100644
--- a/arch/arm/boot/dts/dra72x.dtsi
+++ b/arch/arm/boot/dts/dra72x.dtsi
@@ -60,9 +60,9 @@ csi2_1: port@1 {
 };
 
 &dss {
-	reg = <0x58000000 0x80>,
-	      <0x58004054 0x4>,
-	      <0x58004300 0x20>;
+	reg = <0 0x80>,
+	      <0x4054 0x4>,
+	      <0x4300 0x20>;
 	reg-names = "dss", "pll1_clkctrl", "pll1";
 
 	clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>,
diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi
index c5abc43..7b1c612 100644
--- a/arch/arm/boot/dts/dra74x.dtsi
+++ b/arch/arm/boot/dts/dra74x.dtsi
@@ -132,11 +132,11 @@ &cpu0_opp_table {
 };
 
 &dss {
-	reg = <0x58000000 0x80>,
-	      <0x58004054 0x4>,
-	      <0x58004300 0x20>,
-	      <0x58009054 0x4>,
-	      <0x58009300 0x20>;
+	reg = <0 0x80>,
+	      <0x4054 0x4>,
+	      <0x4300 0x20>,
+	      <0x9054 0x4>,
+	      <0x9300 0x20>;
 	reg-names = "dss", "pll1_clkctrl", "pll1",
 		    "pll2_clkctrl", "pll2";
 
diff --git a/arch/arm/boot/dts/ecx-2000.dts b/arch/arm/boot/dts/ecx-2000.dts
index 5651ae6..f6eb715 100644
--- a/arch/arm/boot/dts/ecx-2000.dts
+++ b/arch/arm/boot/dts/ecx-2000.dts
@@ -13,7 +13,6 @@ / {
 	compatible = "calxeda,ecx-2000";
 	#address-cells = <2>;
 	#size-cells = <2>;
-	clock-ranges;
 
 	cpus {
 		#address-cells = <1>;
@@ -83,8 +82,7 @@ memory-controller@fff00000 {
 		intc: interrupt-controller@fff11000 {
 			compatible = "arm,cortex-a15-gic";
 			#interrupt-cells = <3>;
-			#size-cells = <0>;
-			#address-cells = <1>;
+			#address-cells = <0>;
 			interrupt-controller;
 			interrupts = <1 9 0xf04>;
 			reg = <0xfff11000 0x1000>,
@@ -95,7 +93,7 @@ intc: interrupt-controller@fff11000 {
 
 		pmu {
 			compatible = "arm,cortex-a9-pmu";
-			interrupts = <0 76 4  0 75 4  0 74 4  0 73 4>;
+			interrupts = <0 76 4>, <0 75 4>, <0 74 4>, <0 73 4>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/ecx-common.dtsi b/arch/arm/boot/dts/ecx-common.dtsi
index 66ee1d3..57a028a 100644
--- a/arch/arm/boot/dts/ecx-common.dtsi
+++ b/arch/arm/boot/dts/ecx-common.dtsi
@@ -27,10 +27,11 @@ sata@ffe08000 {
 			reg = <0xffe08000 0x10000>;
 			interrupts = <0 83 4>;
 			dma-coherent;
-			calxeda,port-phys = <&combophy5 0 &combophy0 0
-					     &combophy0 1 &combophy0 2
-					     &combophy0 3>;
-			calxeda,sgpio-gpio =<&gpioh 5 1 &gpioh 6 1 &gpioh 7 1>;
+			calxeda,port-phys = < &combophy5 0>, <&combophy0 0>,
+					     <&combophy0 1>, <&combophy0 2>,
+					     <&combophy0 3>;
+			calxeda,sgpio-gpio =<&gpioh 5 1>, <&gpioh 6 1>,
+					    <&gpioh 7 1>;
 			calxeda,led-order = <4 0 1 2 3>;
 		};
 
@@ -114,8 +115,8 @@ serial@fff36000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xfff36000 0x1000>;
 			interrupts = <0 20 4>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
+			clocks = <&pclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
 		};
 
 		smic@fff3a000 {
@@ -202,14 +203,14 @@ dma@fff3d000 {
 		ethernet@fff50000 {
 			compatible = "calxeda,hb-xgmac";
 			reg = <0xfff50000 0x1000>;
-			interrupts = <0 77 4  0 78 4  0 79 4>;
+			interrupts = <0 77 4>, <0 78 4>, <0 79 4>;
 			dma-coherent;
 		};
 
 		ethernet@fff51000 {
 			compatible = "calxeda,hb-xgmac";
 			reg = <0xfff51000 0x1000>;
-			interrupts = <0 80 4  0 81 4  0 82 4>;
+			interrupts = <0 80 4>, <0 81 4>, <0 82 4>;
 			dma-coherent;
 		};
 
diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
index dee35e3..b27a820 100644
--- a/arch/arm/boot/dts/exynos3250-artik5.dtsi
+++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
@@ -23,7 +23,7 @@ chosen {
 
 	memory@40000000 {
 		device_type = "memory";
-		reg = <0x40000000 0x1ff00000>;
+		reg = <0x40000000 0x1f800000>;
 	};
 
 	firmware@205f000 {
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index a1bdf78..9dda6bd 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -115,7 +115,7 @@ spi-lcd {
 		gpio-sck = <&gpy3 1 GPIO_ACTIVE_HIGH>;
 		gpio-mosi = <&gpy3 3 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <1>;
-		cs-gpios = <&gpy4 3 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpy4 3 GPIO_ACTIVE_LOW>;
 
 		lcd@0 {
 			compatible = "samsung,ld9040";
@@ -124,8 +124,6 @@ lcd@0 {
 			vci-supply = <&ldo17_reg>;
 			reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
 			spi-max-frequency = <1200000>;
-			spi-cpol;
-			spi-cpha;
 			power-on-delay = <10>;
 			reset-delay = <10>;
 			panel-width-mm = <90>;
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index 9c39e82..73d6a71 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -165,6 +165,15 @@ &cpu0 {
 	cpu0-supply = <&buck2_reg>;
 };
 
+&cpu0_opp_table {
+	opp-1000000000 {
+		opp-suspend;
+	};
+	opp-800000000 {
+		/delete-property/opp-suspend;
+	};
+};
+
 &pinctrl_1 {
 	gpio_power_key: power_key {
 		samsung,pins = "gpx1-3";
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index f8ebc62..6904091 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -93,22 +93,23 @@ main_dc_reg: regulator@0 {
 			compatible = "regulator-fixed";
 			reg = <0>;
 			regulator-name = "MAIN_DC";
+			regulator-always-on;
 		};
 
 		mmc_reg: regulator@1 {
 			compatible = "regulator-fixed";
 			reg = <1>;
-			regulator-name = "VDD_33ON_2.8V";
+			regulator-name = "VDD_MMC";
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
-			gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
+			regulator-always-on;
 		};
 
 		reg_hdmi_en: regulator@2 {
 			compatible = "regulator-fixed";
 			reg = <2>;
 			regulator-name = "hdmi-en";
+			regulator-always-on;
 		};
 
 		vcc_1v2_reg: regulator@3 {
@@ -117,6 +118,7 @@ vcc_1v2_reg: regulator@3 {
 			regulator-name = "VCC_1V2";
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
+			regulator-always-on;
 		};
 
 		vcc_1v8_reg: regulator@4 {
@@ -125,6 +127,7 @@ vcc_1v8_reg: regulator@4 {
 			regulator-name = "VCC_1V8";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
 		};
 
 		vcc_3v3_reg: regulator@5 {
@@ -133,6 +136,7 @@ vcc_3v3_reg: regulator@5 {
 			regulator-name = "VCC_3V3";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index ee28d30..e9a09dd 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -584,6 +584,7 @@ ldo27_reg: LDO27 {
 				regulator-name = "PVDD_G3DS_1V0";
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
 
 				regulator-state-mem {
 					regulator-on-in-suspend;
@@ -697,6 +698,7 @@ buck4_reg: BUCK4 {
 				regulator-name = "PVDD_G3D_1V0";
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
 
 				regulator-state-mem {
 					regulator-off-in-suspend;
diff --git a/arch/arm/boot/dts/exynos5422-cpus.dtsi b/arch/arm/boot/dts/exynos5422-cpus.dtsi
index 1b8605c..4b641b9 100644
--- a/arch/arm/boot/dts/exynos5422-cpus.dtsi
+++ b/arch/arm/boot/dts/exynos5422-cpus.dtsi
@@ -31,6 +31,7 @@ cpu0: cpu@100 {
 			operating-points-v2 = <&cluster_a7_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
 			capacity-dmips-mhz = <539>;
+			dynamic-power-coefficient = <90>;
 		};
 
 		cpu1: cpu@101 {
@@ -43,6 +44,7 @@ cpu1: cpu@101 {
 			operating-points-v2 = <&cluster_a7_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
 			capacity-dmips-mhz = <539>;
+			dynamic-power-coefficient = <90>;
 		};
 
 		cpu2: cpu@102 {
@@ -55,6 +57,7 @@ cpu2: cpu@102 {
 			operating-points-v2 = <&cluster_a7_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
 			capacity-dmips-mhz = <539>;
+			dynamic-power-coefficient = <90>;
 		};
 
 		cpu3: cpu@103 {
@@ -67,6 +70,7 @@ cpu3: cpu@103 {
 			operating-points-v2 = <&cluster_a7_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
 			capacity-dmips-mhz = <539>;
+			dynamic-power-coefficient = <90>;
 		};
 
 		cpu4: cpu@0 {
@@ -79,6 +83,7 @@ cpu4: cpu@0 {
 			operating-points-v2 = <&cluster_a15_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
 			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <310>;
 		};
 
 		cpu5: cpu@1 {
@@ -91,6 +96,7 @@ cpu5: cpu@1 {
 			operating-points-v2 = <&cluster_a15_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
 			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <310>;
 		};
 
 		cpu6: cpu@2 {
@@ -103,6 +109,7 @@ cpu6: cpu@2 {
 			operating-points-v2 = <&cluster_a15_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
 			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <310>;
 		};
 
 		cpu7: cpu@3 {
@@ -115,6 +122,7 @@ cpu7: cpu@3 {
 			operating-points-v2 = <&cluster_a15_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
 			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <310>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
index 5cf1aed..ab27ff8 100644
--- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -901,6 +901,7 @@ buck4_reg: BUCK4 {
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <1400000>;
 				regulator-boot-on;
+				regulator-always-on;
 
 				regulator-state-mem {
 					regulator-off-in-suspend;
diff --git a/arch/arm/boot/dts/exynos5422-odroidhc1.dts b/arch/arm/boot/dts/exynos5422-odroidhc1.dts
index f163206..8126592 100644
--- a/arch/arm/boot/dts/exynos5422-odroidhc1.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidhc1.dts
@@ -215,6 +215,36 @@ map1 {
 				};
 			};
 		};
+		gpu_thermal: gpu-thermal {
+			thermal-sensors = <&tmu_gpu 0>;
+			trips {
+				gpu_alert0: gpu-alert-0 {
+					temperature = <70000>;
+					hysteresis = <10000>;
+					type = "active";
+				};
+				gpu_alert1: gpu-alert-1 {
+					temperature = <85000>;
+					hysteresis = <10000>;
+					type = "active";
+				};
+				gpu_crit0: gpu-crit-0 {
+					temperature = <120000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert0>;
+					cooling-device = <&gpu 0 2>;
+				};
+				map1 {
+					trip = <&gpu_alert1>;
+					cooling-device = <&gpu 3 6>;
+				};
+			};
+		};
 	};
 
 };
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index 1865a70..5da2d81 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -357,6 +357,65 @@ cpu3_cooling_map4: map4 {
 				};
 			};
 		};
+		gpu_thermal: gpu-thermal {
+			thermal-sensors = <&tmu_gpu 0>;
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+			trips {
+				gpu_alert0: gpu-alert-0 {
+					temperature = <50000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+				gpu_alert1: gpu-alert-1 {
+					temperature = <60000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+				gpu_alert2: gpu-alert-2 {
+					temperature = <70000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+				gpu_crit0: gpu-crit-0 {
+					temperature = <120000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+				gpu_alert3: gpu-alert-3 {
+					temperature = <70000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+				gpu_alert4: gpu-alert-4 {
+					temperature = <85000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert0>;
+					cooling-device = <&fan0 0 1>;
+				};
+				map1 {
+					trip = <&gpu_alert1>;
+					cooling-device = <&fan0 1 2>;
+				};
+				map2 {
+					trip = <&gpu_alert2>;
+					cooling-device = <&fan0 2 3>;
+				};
+				map3 {
+					trip = <&gpu_alert3>;
+					cooling-device = <&gpu 0 2>;
+				};
+				map4 {
+					trip = <&gpu_alert4>;
+					cooling-device = <&gpu 3 6>;
+				};
+			};
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
index e2030ba..cc39289 100644
--- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
@@ -119,13 +119,11 @@ led-orange-hd {
 
 	/*
 	 * This is a Sunon Maglev GM0502PFV2-8 cooling fan @10000 RPM.
-	 * Since the platform has no temperature sensor, this is controlled
-	 * from userspace by using the hard disks S.M.A.R.T. temperature
 	 * sensor. It is turned on when the temperature exceeds 46 degrees
 	 * and turned off when the temperatures goes below 41 degrees
 	 * (celsius).
 	 */
-	gpio-fan {
+	fan0: gpio-fan {
 		compatible = "gpio-fan";
 		/* Collides with IDE */
 		gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
@@ -133,6 +131,40 @@ gpio-fan {
 		#cooling-cells = <2>;
 	};
 
+	thermal-zones {
+		chassis-thermal {
+			/* Poll every 20 seconds */
+			polling-delay = <20000>;
+			/* Poll every 2nd second when cooling */
+			polling-delay-passive = <2000>;
+			/*  Use the thermal sensor in the hard drive */
+			thermal-sensors = <&drive0>;
+
+			/* Tripping points from the fan.script in the rootfs */
+			trips {
+				alert: chassis-alert {
+					/* At 43 degrees turn on the fan */
+					temperature = <43000>;
+					hysteresis = <3000>;
+					type = "active";
+				};
+				crit: chassis-crit {
+					/* Just shut down at 60 degrees */
+					temperature = <60000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&alert>;
+					cooling-device = <&fan0 1 1>;
+				};
+			};
+		};
+	};
+
 	/*
 	 * The touchpad input is connected to a GPIO bit-banged
 	 * I2C bus.
@@ -443,8 +475,18 @@ ethernet-port@1 {
 			};
 		};
 
-		ata@63000000 {
+		ide@63000000 {
 			status = "okay";
+
+			/*
+			 * This drive may have a temperature sensor with a
+			 * thermal zone we can use for thermal control of the
+			 * chassis temperature using the fan.
+			 */
+			drive0: ide-port@0 {
+				reg = <0>;
+				#thermal-sensor-cells = <0>;
+			};
 		};
 
 		display-controller@6a000000 {
diff --git a/arch/arm/boot/dts/gemini-dlink-dns-313.dts b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
index 360642a..c6f3d90 100644
--- a/arch/arm/boot/dts/gemini-dlink-dns-313.dts
+++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
@@ -297,7 +297,7 @@ ethernet-port@1 {
 			};
 		};
 
-		ata@63000000 {
+		ide@63000000 {
 			status = "okay";
 		};
 	};
diff --git a/arch/arm/boot/dts/gemini-nas4220b.dts b/arch/arm/boot/dts/gemini-nas4220b.dts
index 521714f..43c45f7 100644
--- a/arch/arm/boot/dts/gemini-nas4220b.dts
+++ b/arch/arm/boot/dts/gemini-nas4220b.dts
@@ -170,11 +170,11 @@ ethernet-port@1 {
 			};
 		};
 
-		ata@63000000 {
+		ide@63000000 {
 			status = "okay";
 		};
 
-		ata@63400000 {
+		ide@63400000 {
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/gemini-sl93512r.dts b/arch/arm/boot/dts/gemini-sl93512r.dts
index a98af03..a0916d3 100644
--- a/arch/arm/boot/dts/gemini-sl93512r.dts
+++ b/arch/arm/boot/dts/gemini-sl93512r.dts
@@ -293,11 +293,11 @@ fixed-link {
 			};
 		};
 
-		ata@63000000 {
+		ide@63000000 {
 			status = "okay";
 		};
 
-		ata@63400000 {
+		ide@63400000 {
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/gemini-sq201.dts b/arch/arm/boot/dts/gemini-sq201.dts
index 239dfac..0c6e6d3 100644
--- a/arch/arm/boot/dts/gemini-sq201.dts
+++ b/arch/arm/boot/dts/gemini-sq201.dts
@@ -289,7 +289,7 @@ fixed-link {
 			};
 		};
 
-		ata@63000000 {
+		ide@63000000 {
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini.dtsi
index 8cf67b1..065ed10 100644
--- a/arch/arm/boot/dts/gemini.dtsi
+++ b/arch/arm/boot/dts/gemini.dtsi
@@ -356,7 +356,7 @@ gmac1: ethernet-port@1 {
 			};
 		};
 
-		ata@63000000 {
+		ide@63000000 {
 			compatible = "cortina,gemini-pata", "faraday,ftide010";
 			reg = <0x63000000 0x1000>;
 			interrupts = <4 IRQ_TYPE_EDGE_RISING>;
@@ -365,9 +365,11 @@ ata@63000000 {
 			clock-names = "PCLK";
 			sata = <&sata>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
-		ata@63400000 {
+		ide@63400000 {
 			compatible = "cortina,gemini-pata", "faraday,ftide010";
 			reg = <0x63400000 0x1000>;
 			interrupts = <5 IRQ_TYPE_EDGE_RISING>;
@@ -376,6 +378,8 @@ ata@63400000 {
 			clock-names = "PCLK";
 			sata = <&sata>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		dma-controller@67000000 {
diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts
index f4e4dca..b6b0225 100644
--- a/arch/arm/boot/dts/highbank.dts
+++ b/arch/arm/boot/dts/highbank.dts
@@ -13,7 +13,6 @@ / {
 	compatible = "calxeda,highbank";
 	#address-cells = <1>;
 	#size-cells = <1>;
-	clock-ranges;
 
 	cpus {
 		#address-cells = <1>;
@@ -96,7 +95,7 @@ cpu@903 {
 		};
 	};
 
-	memory {
+	memory@0 {
 		name = "memory";
 		device_type = "memory";
 		reg = <0x00000000 0xff900000>;
@@ -128,14 +127,12 @@ watchdog@fff10620 {
 		intc: interrupt-controller@fff11000 {
 			compatible = "arm,cortex-a9-gic";
 			#interrupt-cells = <3>;
-			#size-cells = <0>;
-			#address-cells = <1>;
 			interrupt-controller;
 			reg = <0xfff11000 0x1000>,
 			      <0xfff10100 0x100>;
 		};
 
-		L2: l2-cache {
+		L2: cache-controller {
 			compatible = "arm,pl310-cache";
 			reg = <0xfff12000 0x1000>;
 			interrupts = <0 70 4>;
@@ -145,14 +142,14 @@ L2: l2-cache {
 
 		pmu {
 			compatible = "arm,cortex-a9-pmu";
-			interrupts = <0 76 4  0 75 4  0 74 4  0 73 4>;
+			interrupts = <0 76 4>, <0 75 4>, <0 74 4>, <0 73 4>;
 		};
 
 
 		sregs@fff3c200 {
 			compatible = "calxeda,hb-sregs-l2-ecc";
 			reg = <0xfff3c200 0x100>;
-			interrupts = <0 71 4  0 72 4>;
+			interrupts = <0 71 4>, <0 72 4>;
 		};
 
 	};
diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts
index 4c9aafe..0729e72 100644
--- a/arch/arm/boot/dts/imx23-olinuxino.dts
+++ b/arch/arm/boot/dts/imx23-olinuxino.dts
@@ -23,7 +23,7 @@ apbh@80000000 {
 			ssp0: spi@80010000 {
 				compatible = "fsl,imx23-mmc";
 				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
+				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>;
 				bus-width = <4>;
 				broken-cd;
 				status = "okay";
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index 8257630..c5edff3 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -267,6 +267,14 @@ MX23_PAD_SSP1_SCK__SSP1_SCK
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
+				mmc0_sck_cfg: mmc0-sck-cfg@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_SSP1_SCK__SSP1_SCK
+					>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
 				mmc1_4bit_pins_a: mmc1-4bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
@@ -422,7 +430,7 @@ dma_apbx: dma-apbx@80024000 {
 				clocks = <&clks 16>;
 			};
 
-			dcp@80028000 {
+			dcp: crypto@80028000 {
 				compatible = "fsl,imx23-dcp";
 				reg = <0x80028000 0x2000>;
 				interrupts = <53 54>;
diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h
index f4516cc..111bfdc 100644
--- a/arch/arm/boot/dts/imx25-pinfunc.h
+++ b/arch/arm/boot/dts/imx25-pinfunc.h
@@ -82,6 +82,7 @@
 #define MX25_PAD_EB0__EB0			0x040 0x258 0x000 0x00 0x000
 #define MX25_PAD_EB0__AUD4_TXD			0x040 0x258 0x464 0x04 0x000
 #define MX25_PAD_EB0__GPIO_2_12			0x040 0x258 0x000 0x05 0x000
+#define MX25_PAD_EB0__CSPI3_SS0			0x040 0x258 0x4bc 0x06 0x000
 
 #define MX25_PAD_EB1__EB1			0x044 0x25c 0x000 0x00 0x000
 #define MX25_PAD_EB1__AUD4_RXD			0x044 0x25c 0x460 0x04 0x000
@@ -102,11 +103,13 @@
 #define MX25_PAD_CS4__NF_CE1			0x054 0x264 0x000 0x01 0x000
 #define MX25_PAD_CS4__UART5_CTS			0x054 0x264 0x000 0x03 0x000
 #define MX25_PAD_CS4__GPIO_3_20			0x054 0x264 0x000 0x05 0x000
+#define MX25_PAD_CS4__CSPI3_MOSI		0x054 0x264 0x4b8 0x06 0x000
 
 #define MX25_PAD_CS5__CS5			0x058 0x268 0x000 0x00 0x000
 #define MX25_PAD_CS5__NF_CE2			0x058 0x268 0x000 0x01 0x000
 #define MX25_PAD_CS5__UART5_RTS			0x058 0x268 0x574 0x03 0x000
 #define MX25_PAD_CS5__GPIO_3_21			0x058 0x268 0x000 0x05 0x000
+#define MX25_PAD_CS5__CSPI3_MISO		0x058 0x268 0x4b4 0x06 0x000
 
 #define MX25_PAD_NF_CE0__NF_CE0			0x05c 0x26c 0x000 0x00 0x000
 #define MX25_PAD_NF_CE0__GPIO_3_22		0x05c 0x26c 0x000 0x05 0x000
@@ -114,6 +117,7 @@
 #define MX25_PAD_ECB__ECB			0x060 0x270 0x000 0x00 0x000
 #define MX25_PAD_ECB__UART5_TXD			0x060 0x270 0x000 0x03 0x000
 #define MX25_PAD_ECB__GPIO_3_23			0x060 0x270 0x000 0x05 0x000
+#define MX25_PAD_ECB__CSPI3_SCLK		0x060 0x270 0x4ac 0x06 0x000
 
 #define MX25_PAD_LBA__LBA			0x064 0x274 0x000 0x00 0x000
 #define MX25_PAD_LBA__UART5_RXD			0x064 0x274 0x578 0x03 0x000
@@ -251,10 +255,12 @@
 
 #define MX25_PAD_LD12__LD12			0x0f8 0x2f0 0x000 0x00 0x000
 #define MX25_PAD_LD12__CSPI2_MOSI		0x0f8 0x2f0 0x4a0 0x02 0x000
+#define MX25_PAD_LD12__KPP_ROW6			0x0f8 0x2f0 0x544 0x04 0x000
 #define MX25_PAD_LD12__FEC_RDATA3		0x0f8 0x2f0 0x510 0x05 0x001
 
 #define MX25_PAD_LD13__LD13			0x0fc 0x2f4 0x000 0x00 0x000
 #define MX25_PAD_LD13__CSPI2_MISO		0x0fc 0x2f4 0x49c 0x02 0x000
+#define MX25_PAD_LD13__KPP_ROW7			0x0fc 0x2f4 0x548 0x04 0x000
 #define MX25_PAD_LD13__FEC_TDATA2		0x0fc 0x2f4 0x000 0x05 0x000
 
 #define MX25_PAD_LD14__LD14			0x100 0x2f8 0x000 0x00 0x000
@@ -512,9 +518,11 @@
 
 #define MX25_PAD_FEC_TX_EN__FEC_TX_EN		0x1d8 0x3d0 0x000 0x00 0x000
 #define MX25_PAD_FEC_TX_EN__GPIO_3_9		0x1d8 0x3d0 0x000 0x05 0x000
+#define MX25_PAD_FEC_TX_EN__KPP_ROW4		0x1d8 0x3d0 0x53c 0x06 0x000
 
 #define MX25_PAD_FEC_RDATA0__FEC_RDATA0		0x1dc 0x3d4 0x000 0x00 0x000
 #define MX25_PAD_FEC_RDATA0__GPIO_3_10		0x1dc 0x3d4 0x000 0x05 0x000
+#define MX25_PAD_FEC_RDATA0__KPP_ROW5 		0x1dc 0x3d4 0x540 0x06 0x000
 
 #define MX25_PAD_FEC_RDATA1__FEC_RDATA1		0x1e0 0x3d8 0x000 0x00 0x000
 /*
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index 40b95a2..1123e683 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -75,7 +75,7 @@ soc {
 		interrupt-parent = <&asic>;
 		ranges;
 
-		aips@43f00000 { /* AIPS1 */
+		bus@43f00000 { /* AIPS1 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -332,7 +332,7 @@ fec: ethernet@50038000 {
 			};
 		};
 
-		aips@53f00000 { /* AIPS2 */
+		bus@53f00000 { /* AIPS2 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index f3464cf..002cd22 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -525,7 +525,7 @@ usbmisc: usbmisc@10024600 {
 				reg = <0x10024600 0x200>;
 			};
 
-			sahara2: sahara@10025000 {
+			sahara2: crypto@10025000 {
 				compatible = "fsl,imx27-sahara";
 				reg = <0x10025000 0x1000>;
 				interrupts = <59>;
diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts
index 3a184d1..c5acc19 100644
--- a/arch/arm/boot/dts/imx28-apx4devkit.dts
+++ b/arch/arm/boot/dts/imx28-apx4devkit.dts
@@ -183,10 +183,20 @@ auart2: serial@8006e000 {
 				pinctrl-0 = <&auart2_2pins_a>;
 				status = "okay";
 			};
+
+			usbphy1: usbphy@8007e000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&usb1_pins_a>;
+				status = "okay";
+			};
 		};
 	};
 
 	ahb@80080000 {
+		usb1: usb@80090000 {
+		      status = "okay";
+		};
+
 		mac0: ethernet@800f0000 {
 			phy-mode = "rmii";
 			pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index e14d8ef..a1cbbeb 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -998,7 +998,7 @@ dma_apbx: dma-apbx@80024000 {
 				clocks = <&clks 26>;
 			};
 
-			dcp: dcp@80028000 {
+			dcp: crypto@80028000 {
 				compatible = "fsl,imx28-dcp", "fsl,imx23-dcp";
 				reg = <0x80028000 0x2000>;
 				interrupts = <52 53 54>;
diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi
index 6b62f07..18270ec 100644
--- a/arch/arm/boot/dts/imx31.dtsi
+++ b/arch/arm/boot/dts/imx31.dtsi
@@ -63,7 +63,7 @@ iram: sram@1fffc000 {
 			ranges = <0 0x1fffc000 0x4000>;
 		};
 
-		aips@43f00000 { /* AIPS1 */
+		bus@43f00000 { /* AIPS1 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -225,7 +225,7 @@ iim: iim@5001c000 {
 			};
 		};
 
-		aips@53f00000 { /* AIPS2 */
+		bus@53f00000 { /* AIPS2 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi
index 9cbdc1a..2ebf2c1 100644
--- a/arch/arm/boot/dts/imx35.dtsi
+++ b/arch/arm/boot/dts/imx35.dtsi
@@ -66,7 +66,7 @@ L2: l2-cache@30000000 {
 			cache-level = <2>;
 		};
 
-		aips1: aips@43f00000 {
+		aips1: bus@43f00000 {
 			compatible = "fsl,aips", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -199,7 +199,7 @@ fec: fec@50038000 {
 			};
 		};
 
-		aips2: aips@53f00000 {
+		aips2: bus@53f00000 {
 			compatible = "fsl,aips", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi
index 0bfe7c9..d325658 100644
--- a/arch/arm/boot/dts/imx50.dtsi
+++ b/arch/arm/boot/dts/imx50.dtsi
@@ -101,7 +101,7 @@ soc {
 		interrupt-parent = <&tzic>;
 		ranges;
 
-		aips@50000000 { /* AIPS1 */
+		bus@50000000 { /* AIPS1 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -389,7 +389,7 @@ uart4: serial@53ff0000 {
 			};
 		};
 
-		aips@60000000 {	/* AIPS2 */
+		bus@60000000 {	/* AIPS2 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts
index 3596060..e559ab0 100644
--- a/arch/arm/boot/dts/imx51-zii-rdu1.dts
+++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts
@@ -217,8 +217,8 @@ sound {
 		simple-audio-card,widgets =
 			"Headphone", "Headphone Jack";
 		simple-audio-card,routing =
-			"Headphone Jack", "HPLEFT",
-			"Headphone Jack", "HPRIGHT";
+			"Headphone Jack", "TPA6130A2 HPLEFT",
+			"Headphone Jack", "TPA6130A2 HPRIGHT";
 		simple-audio-card,aux-devs = <&hpa1>;
 
 		sound_cpu: simple-audio-card,cpu {
@@ -470,6 +470,7 @@ hpa1: amp@60 {
 		compatible = "ti,tpa6130a2";
 		reg = <0x60>;
 		Vdd-supply = <&reg_3p3v>;
+		sound-name-prefix = "TPA6130A2";
 	};
 
 	ds1341: rtc@68 {
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index dea86b9..92fbb90 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -104,6 +104,11 @@ usbphy0: usbphy0 {
 		#phy-cells = <0>;
 	};
 
+	capture-subsystem {
+		compatible = "fsl,imx-capture-subsystem";
+		ports = <&ipu_csi0>, <&ipu_csi1>;
+	};
+
 	display-subsystem {
 		compatible = "fsl,imx-display-subsystem";
 		ports = <&ipu_di0>, <&ipu_di1>;
@@ -143,6 +148,14 @@ ipu: ipu@40000000 {
 			clock-names = "bus", "di0", "di1";
 			resets = <&src 2>;
 
+			ipu_csi0: port@0 {
+				reg = <0>;
+			};
+
+			ipu_csi1: port@1 {
+				reg = <1>;
+			};
+
 			ipu_di0: port@2 {
 				reg = <2>;
 
@@ -158,7 +171,7 @@ ipu_di1_disp2: endpoint {
 			};
 		};
 
-		aips@70000000 { /* AIPS1 */
+		bus@70000000 { /* AIPS1 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -440,7 +453,7 @@ clks: ccm@73fd4000{
 			};
 		};
 
-		aips@80000000 {	/* AIPS2 */
+		bus@80000000 {	/* AIPS2 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index ed341cf..8536f59 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -222,7 +222,7 @@ gpu: gpu@30000000 {
 			clock-names = "core_clk", "mem_iface_clk";
 		};
 
-		aips@50000000 { /* AIPS1 */
+		bus@50000000 { /* AIPS1 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -654,7 +654,7 @@ uart4: serial@53ff0000 {
 			};
 		};
 
-		aips@60000000 {	/* AIPS2 */
+		bus@60000000 {	/* AIPS2 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
index 84fcc20..65359ae 100644
--- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
@@ -1,44 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
- * Copyright 2014-2016 Toradex AG
+ * Copyright 2014-2020 Toradex
  * Copyright 2012 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/imx6dl-pico-dwarf.dts b/arch/arm/boot/dts/imx6dl-pico-dwarf.dts
new file mode 100644
index 0000000..659a8e8
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-pico-dwarf.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-pico-pi.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX6 DualLite/Solo Board and Dwarf baseboard";
+	compatible = "technexion,imx6dl-pico", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-pico-hobbit.dts b/arch/arm/boot/dts/imx6dl-pico-hobbit.dts
new file mode 100644
index 0000000..d7403c5
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-pico-hobbit.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-pico-hobbit.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX6 DualLite/Solo Board and Hobbit baseboard";
+	compatible = "technexion,imx6dl-pico", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-pico-nymph.dts b/arch/arm/boot/dts/imx6dl-pico-nymph.dts
new file mode 100644
index 0000000..b282dbf
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-pico-nymph.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-pico-pi.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX6 DualLite/Solo Board and Nymph baseboard";
+	compatible = "technexion,imx6dl-pico", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-pico-pi.dts b/arch/arm/boot/dts/imx6dl-pico-pi.dts
new file mode 100644
index 0000000..b7b1c07
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-pico-pi.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-pico-pi.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX6 DualLite/Solo Board and PI baseboard";
+	compatible = "technexion,imx6dl-pico", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
index 829654e..065d3ab 100644
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -89,11 +89,25 @@ &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+	phy-handle = <&rgmii_phy>;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Atheros AR8035 PHY */
+		rgmii_phy: ethernet-phy@4 {
+			reg = <4>;
+			interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <1000>;
+		};
+	};
 };
 
 &gpio1 {
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
index 80ed5f1..2b9423d 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -562,6 +562,7 @@ &usbh1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usbh1>;
 	vbus-supply = <&reg_usb_h1_vbus>;
+	over-current-active-low;
 	status = "disabled";
 };
 
@@ -569,6 +570,7 @@ &usbotg {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usbotg>;
 	vbus-supply = <&reg_usb_otg_vbus>;
+	over-current-active-low;
 	srp-disable;
 	hnp-disable;
 	adp-disable;
diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
index 008312e..77b65a4 100644
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -44,6 +44,8 @@ cpu0: cpu@0 {
 			arm-supply = <&reg_arm>;
 			pu-supply = <&reg_pu>;
 			soc-supply = <&reg_soc>;
+			nvmem-cells = <&cpu_speed_grade>;
+			nvmem-cell-names = "speed_grade";
 		};
 
 		cpu@1 {
@@ -85,8 +87,8 @@ ocram: sram@900000 {
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 
-		aips1: aips-bus@2000000 {
-			iomuxc: iomuxc@20e0000 {
+		aips1: bus@2000000 {
+			iomuxc: pinctrl@20e0000 {
 				compatible = "fsl,imx6dl-iomuxc";
 			};
 
@@ -101,7 +103,7 @@ epdc: epdc@20f4000 {
 			};
 		};
 
-		aips2: aips-bus@2100000 {
+		aips2: bus@2100000 {
 			i2c4: i2c@21f8000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
diff --git a/arch/arm/boot/dts/imx6q-apalis-eval.dts b/arch/arm/boot/dts/imx6q-apalis-eval.dts
index 4665e15..fab83ab 100644
--- a/arch/arm/boot/dts/imx6q-apalis-eval.dts
+++ b/arch/arm/boot/dts/imx6q-apalis-eval.dts
@@ -1,44 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
- * Copyright 2014-2017 Toradex AG
+ * Copyright 2014-2020 Toradex
  * Copyright 2012 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
index a3fa04a..1614b1a 100644
--- a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
+++ b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
@@ -1,44 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
- * Copyright 2014-2017 Toradex AG
+ * Copyright 2014-2020 Toradex
  * Copyright 2012 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
index 5ba49d0..fa9f98d 100644
--- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts
+++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
@@ -1,44 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
- * Copyright 2014-2017 Toradex AG
+ * Copyright 2014-2020 Toradex
  * Copyright 2012 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/imx6q-marsboard.dts b/arch/arm/boot/dts/imx6q-marsboard.dts
index 84b30bd..05ee28388 100644
--- a/arch/arm/boot/dts/imx6q-marsboard.dts
+++ b/arch/arm/boot/dts/imx6q-marsboard.dts
@@ -111,8 +111,22 @@ &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+	phy-handle = <&rgmii_phy>;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Atheros AR8035 PHY */
+		rgmii_phy: ethernet-phy@4 {
+			reg = <4>;
+			interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <1000>;
+		};
+	};
 };
 
 &hdmi {
diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts
index 61347a5..69f170f 100644
--- a/arch/arm/boot/dts/imx6q-novena.dts
+++ b/arch/arm/boot/dts/imx6q-novena.dts
@@ -107,7 +107,7 @@ heartbeat {
 	};
 
 	panel: panel {
-		compatible = "innolux,n133hse-ea1", "simple-panel";
+		compatible = "innolux,n133hse-ea1";
 		backlight = <&backlight>;
 	};
 
diff --git a/arch/arm/boot/dts/imx6q-pico-dwarf.dts b/arch/arm/boot/dts/imx6q-pico-dwarf.dts
new file mode 100644
index 0000000..618d274
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-pico-dwarf.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-pico-pi.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX6 Quad Board and Dwarf baseboard";
+	compatible = "technexion,imx6q-pico", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-pico-hobbit.dts b/arch/arm/boot/dts/imx6q-pico-hobbit.dts
new file mode 100644
index 0000000..7a66650
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-pico-hobbit.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-pico-hobbit.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX6 Quad Board and Hobbit baseboard";
+	compatible = "technexion,imx6q-pico", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-pico-nymph.dts b/arch/arm/boot/dts/imx6q-pico-nymph.dts
new file mode 100644
index 0000000..fe5a7be
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-pico-nymph.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-pico-pi.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX6 Quad Board and Nymph baseboard";
+	compatible = "technexion,imx6q-pico", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-pico-pi.dts b/arch/arm/boot/dts/imx6q-pico-pi.dts
new file mode 100644
index 0000000..9413f0a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-pico-pi.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-pico-pi.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX6 Quad Board and PI baseboard";
+	compatible = "technexion,imx6q-pico", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 9d3be1c..78a4d64 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -49,6 +49,8 @@ cpu0: cpu@0 {
 			arm-supply = <&reg_arm>;
 			pu-supply = <&reg_pu>;
 			soc-supply = <&reg_soc>;
+			nvmem-cells = <&cpu_speed_grade>;
+			nvmem-cell-names = "speed_grade";
 		};
 
 		cpu1: cpu@1 {
@@ -164,7 +166,7 @@ ocram: sram@900000 {
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 
-		aips-bus@2000000 { /* AIPS1 */
+		bus@2000000 { /* AIPS1 */
 			spba-bus@2000000 {
 				ecspi5: spi@2018000 {
 					#address-cells = <1>;
@@ -181,7 +183,7 @@ ecspi5: spi@2018000 {
 				};
 			};
 
-			iomuxc: iomuxc@20e0000 {
+			iomuxc: pinctrl@20e0000 {
 				compatible = "fsl,imx6q-iomuxc";
 			};
 		};
diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
index 347a5ed..e34be8f 100644
--- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -1,44 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
- * Copyright 2014-2017 Toradex AG
+ * Copyright 2014-2020 Toradex
  * Copyright 2012 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/gpio/gpio.h>
diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
index d03dff2..6e3c6b4 100644
--- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
@@ -1,44 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
- * Copyright 2014-2016 Toradex AG
+ * Copyright 2014-2020 Toradex
  * Copyright 2012 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/gpio/gpio.h>
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index 1a9a9d9..60563ff 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -313,6 +313,11 @@ touchscreen: egalax_ts@4 {
 		interrupts = <12 2>;
 		wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
 	};
+
+	accel@1e {
+		compatible = "nxp,fxos8700";
+		reg = <0x1e>;
+	};
 };
 
 &ldb {
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index 54b2bea..8942bec 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -304,6 +304,11 @@ touchscreen: egalax_ts@4 {
 		interrupts = <11 2>;
 		wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
 	};
+
+	accel@1e {
+		compatible = "nxp,fxos8700";
+		reg = <0x1e>;
+	};
 };
 
 &ldb {
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index 1b6c133..c40583d 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -361,6 +361,11 @@ touchscreen: egalax_ts@4 {
 		interrupts = <12 2>;
 		wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
 	};
+
+	accel@1e {
+		compatible = "nxp,fxos8700";
+		reg = <0x1e>;
+	};
 };
 
 &ldb {
diff --git a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
index a106689..ee85031 100644
--- a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
@@ -173,6 +173,25 @@ &i2c2 {
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
+	magn@1c {
+		compatible = "st,lsm9ds1-magn";
+		reg = <0x1c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mag>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <2 IRQ_TYPE_EDGE_RISING>;
+	};
+
+	imu@6a {
+		compatible = "st,lsm9ds1-imu";
+		reg = <0x6a>;
+		st,drdy-int-pin = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_imu>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
 	ltc3676: pmic@3c {
 		compatible = "lltc,ltc3676";
 		reg = <0x3c>;
@@ -426,6 +445,12 @@ MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
 		>;
 	};
 
+	pinctrl_imu: imugrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
+		>;
+	};
+
 	pinctrl_ipu1_csi0: ipu1csi0grp {
 		fsl,pins = <
 			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12    0x1b0b0
@@ -449,6 +474,12 @@ MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
 		>;
 	};
 
+	pinctrl_mag: maggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+		>;
+	};
+
 	pinctrl_pcie: pciegrp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
index be1af74..30fe47f 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
@@ -220,6 +220,14 @@ &uart2 {
 	status = "okay";
 };
 
+/* cc1352 */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
 /* Sterling-LWB Bluetooth */
 &uart4 {
 	pinctrl-names = "default";
@@ -411,6 +419,23 @@ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
 		>;
 	};
 
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART3_RTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D31__UART3_CTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x4001b0b1 /* DIO20 */
+			MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05	0x4001b0b1 /* DIO14 */
+			MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06	0x4001b0b1 /* DIO15 */
+			MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08	0x1b0b1 /* TMS */
+			MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09	0x1b0b1 /* TCK */
+			MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10	0x1b0b1 /* TDO */
+			MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11	0x1b0b1 /* TDI */
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x4001b0b1 /* RST# */
+		>;
+	};
+
 	pinctrl_uart4: uart4grp {
 		fsl,pins = <
 			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x1b0b1
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
index 77d8713..41ebe45 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
@@ -88,7 +88,7 @@ eeprom@50 {
 		reg = <0x50>;
 	};
 
-	pmic@58 {
+	pmic: pmic@58 {
 		compatible = "dlg,da9062";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_pmic>;
@@ -96,6 +96,8 @@ pmic@58 {
 		interrupt-parent = <&gpio1>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		gpio-controller;
+		#gpio-cells = <2>;
 
 		da9062_rtc: rtc {
 			compatible = "dlg,da9062-rtc";
@@ -107,6 +109,7 @@ da9062_onkey: onkey {
 
 		watchdog {
 			compatible = "dlg,da9062-watchdog";
+			dlg,use-sw-pm;
 		};
 
 		regulators {
diff --git a/arch/arm/boot/dts/imx6qdl-pico-dwarf.dtsi b/arch/arm/boot/dts/imx6qdl-pico-dwarf.dtsi
new file mode 100644
index 0000000..3a968782
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-pico-dwarf.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2017 NXP
+
+#include "imx6qdl-pico.dtsi"
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led {
+			label = "gpio-led";
+			gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+};
+
+&i2c1 {
+	mpl3115@60 {
+		compatible = "fsl,mpl3115";
+		reg = <0x60>;
+	};
+};
+
+&i2c2 {
+	io-expander@25 {
+		compatible = "nxp,pca9554";
+		reg = <0x25>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+	};
+
+};
+
+&iomuxc {
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-pico-hobbit.dtsi b/arch/arm/boot/dts/imx6qdl-pico-hobbit.dtsi
new file mode 100644
index 0000000..144c472
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-pico-hobbit.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2017 NXP
+
+#include "imx6qdl-pico.dtsi"
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led {
+			label = "gpio-led";
+			gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+};
+
+&i2c2 {
+	status = "okay";
+
+	adc081c: adc@50 {
+		compatible = "ti,adc081c";
+		reg = <0x50>;
+		vref-supply = <&reg_3p3v>;
+	};
+};
+
+&iomuxc {
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-pico-nymph.dtsi b/arch/arm/boot/dts/imx6qdl-pico-nymph.dtsi
new file mode 100644
index 0000000..3d56a42
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-pico-nymph.dtsi
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+
+#include "imx6qdl-pico.dtsi"
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led {
+			label = "gpio-led";
+			gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+};
+
+&i2c1 {
+	adc@52 {
+		compatible = "ti,adc081c";
+		reg = <0x52>;
+		vref-supply = <&reg_2p5v>;
+	};
+};
+
+&i2c2 {
+	io-expander@25 {
+		compatible = "nxp,pca9554";
+		reg = <0x25>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+	};
+};
+
+&i2c3 {
+	rtc@68 {
+		compatible = "dallas,ds1337";
+		reg = <0x68>;
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-pico-pi.dtsi b/arch/arm/boot/dts/imx6qdl-pico-pi.dtsi
new file mode 100644
index 0000000..b823dce
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-pico-pi.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2017 NXP
+
+#include "imx6qdl-pico.dtsi"
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led {
+			label = "gpio-led";
+			gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+};
+
+&hdmi {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-pico.dtsi b/arch/arm/boot/dts/imx6qdl-pico.dtsi
new file mode 100644
index 0000000..39dfd90
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-pico.dtsi
@@ -0,0 +1,617 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_1p5v: regulator-1p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P5V";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+	};
+
+	reg_2p8v: regulator-2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg_vbus>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	};
+
+	codec_osc: clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx6-pico-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 50000 0>;
+		brightness-levels = <0 36 72 108 144 180 216 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	reg_lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_lcd>;
+		regulator-name = "lcd-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	lcd_display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel {
+		compatible = "vxt,vl050-8048nt-c01";
+		backlight = <&backlight>;
+		power-supply = <&reg_lcd_3v3>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	sgtl5000: audio-codec@a {
+		#sound-dai-cells = <0>;
+		reg = <0x0a>;
+		compatible = "fsl,sgtl5000";
+		clocks = <&codec_osc>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_1p8v>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio5 27 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+		wakeup-source;
+	};
+
+	camera@3c {
+		compatible = "ovti,ov5645";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5645>;
+		reg = <0x3c>;
+		clocks = <&clks IMX6QDL_CLK_CKO2>;
+		clock-names = "xclk";
+		clock-frequency = <24000000>;
+		vdddo-supply = <&reg_1p8v>;
+		vdda-supply = <&reg_2p8v>;
+		vddd-supply = <&reg_1p5v>;
+		enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+
+		port {
+			ov5645_to_mipi_csi2: endpoint {
+				remote-endpoint = <&mipi_csi2_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&mipi_csi {
+	status = "okay";
+
+	port@0 {
+		reg = <0>;
+
+		mipi_csi2_in: endpoint {
+			remote-endpoint = <&ov5645_to_mipi_csi2>;
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie_reset>;
+	reset-gpio = <&gpio5 21 GPIO_ACTIVE_LOW>;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {  /* Bluetooth module */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	cd-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usdhc2 {  /* Wifi/BT  */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19	0x4001b0b5 /* PICO_P24 */
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x4001b0b5 /* PICO_P26 */
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x4001b0b5 /* PICO_P28 */
+			MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26	0x4001b0b5 /* PICO_P30 */
+			MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27	0x4001b0b5 /* PICO_P32 */
+			MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00	0x4001b0b5 /* PICO_P34 */
+			MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30	0x4001b0b5 /* PICO_P42 */
+			MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31	0x4001b0b5 /* PICO_P44 */
+			MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01	0x4001b0b5 /* PICO_P48 */
+		>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x000f0b0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO		0x1b0b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI		0x1b0b1
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK		0x1b0b1
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x000f0b0
+			MX6QDL_PAD_EIM_LBA__GPIO2_IO27		0x000f0b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1f0b1
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1: ipu1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
+			MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04		0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
+		>;
+	};
+
+	pinctrl_ov5645: ov5645grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06		0x0b0b0
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0b0b0
+			MX6QDL_PAD_GPIO_3__CCM_CLKO2		0x000b0
+		>;
+	};
+
+	pinctrl_pcie_reset: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x130b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT2__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_reg_lcd: reglcdgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11		0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+		>;
+	};
+
+	pinctrl_usbotg_vbus: usbotgvbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x17071
+			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x17071
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x17071
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x17071
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x17071
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x17071
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0xb0b1
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-sr-som-ti.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som-ti.dtsi
index 44a97ba93..352ac58 100644
--- a/arch/arm/boot/dts/imx6qdl-sr-som-ti.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sr-som-ti.dtsi
@@ -153,6 +153,7 @@ &usdhc1 {
 	bus-width = <4>;
 	keep-power-in-suspend;
 	mmc-pwrseq = <&pwrseq_ti_wifi>;
+	cap-power-off-card;
 	non-removable;
 	vmmc-supply = <&vcc_3v3>;
 	/* vqmmc-supply = <&nvcc_sd1>; - MMC layer doesn't like it! */
diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
index 0075637..20350e8 100644
--- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
@@ -216,6 +216,13 @@ edp_refclk: edp-refclk {
 	};
 };
 
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+	                  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
+	                         <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
+};
+
 &cpu0 {
 	fsl,soc-operating-points = <
 		/* ARM kHz  SOC-PU uV */
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index e6b4b85..98da446 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -294,7 +294,7 @@ pcie: pcie@1ffc000 {
 			status = "disabled";
 		};
 
-		aips-bus@2000000 { /* AIPS1 */
+		bus@2000000 { /* AIPS1 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -574,7 +574,7 @@ can2: flexcan@2094000 {
 				status = "disabled";
 			};
 
-			gpt: gpt@2098000 {
+			gpt: timer@2098000 {
 				compatible = "fsl,imx6q-gpt", "fsl,imx31-gpt";
 				reg = <0x02098000 0x4000>;
 				interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
@@ -661,7 +661,7 @@ gpio7: gpio@20b4000 {
 				#interrupt-cells = <2>;
 			};
 
-			kpp: kpp@20b8000 {
+			kpp: keypad@20b8000 {
 				compatible = "fsl,imx6q-kpp", "fsl,imx21-kpp";
 				reg = <0x020b8000 0x4000>;
 				interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
@@ -669,14 +669,14 @@ kpp: kpp@20b8000 {
 				status = "disabled";
 			};
 
-			wdog1: wdog@20bc000 {
+			wdog1: watchdog@20bc000 {
 				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
 				reg = <0x020bc000 0x4000>;
 				interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6QDL_CLK_IPG>;
 			};
 
-			wdog2: wdog@20c0000 {
+			wdog2: watchdog@20c0000 {
 				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
 				reg = <0x020c0000 0x4000>;
 				interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
@@ -684,7 +684,7 @@ wdog2: wdog@20c0000 {
 				status = "disabled";
 			};
 
-			clks: ccm@20c4000 {
+			clks: clock-controller@20c4000 {
 				compatible = "fsl,imx6q-ccm";
 				reg = <0x020c4000 0x4000>;
 				interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
@@ -908,7 +908,7 @@ mux: mux-controller {
 				};
 			};
 
-			iomuxc: iomuxc@20e0000 {
+			iomuxc: pinctrl@20e0000 {
 				compatible = "fsl,imx6dl-iomuxc", "fsl,imx6q-iomuxc";
 				reg = <0x20e0000 0x4000>;
 			};
@@ -935,14 +935,14 @@ sdma: sdma@20ec000 {
 			};
 		};
 
-		aips-bus@2100000 { /* AIPS2 */
+		bus@2100000 { /* AIPS2 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0x02100000 0x100000>;
 			ranges;
 
-			crypto: caam@2100000 {
+			crypto: crypto@2100000 {
 				compatible = "fsl,sec-v4.0";
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -954,13 +954,13 @@ crypto: caam@2100000 {
 					 <&clks IMX6QDL_CLK_EIM_SLOW>;
 				clock-names = "mem", "aclk", "ipg", "emi_slow";
 
-				sec_jr0: jr0@1000 {
+				sec_jr0: jr@1000 {
 					compatible = "fsl,sec-v4.0-job-ring";
 					reg = <0x1000 0x1000>;
 					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 				};
 
-				sec_jr1: jr1@2000 {
+				sec_jr1: jr@2000 {
 					compatible = "fsl,sec-v4.0-job-ring";
 					reg = <0x2000 0x1000>;
 					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
@@ -1039,13 +1039,13 @@ fec: ethernet@2188000 {
 				compatible = "fsl,imx6q-fec";
 				reg = <0x02188000 0x4000>;
 				interrupt-names = "int0", "pps";
-				interrupts-extended =
-					<&intc 0 118 IRQ_TYPE_LEVEL_HIGH>,
-					<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 119 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6QDL_CLK_ENET>,
 					 <&clks IMX6QDL_CLK_ENET>,
 					 <&clks IMX6QDL_CLK_ENET_REF>;
 				clock-names = "ipg", "ahb", "ptp";
+				gpr = <&gpr>;
 				status = "disabled";
 			};
 
@@ -1161,10 +1161,16 @@ weim: weim@21b8000 {
 				status = "disabled";
 			};
 
-			ocotp: ocotp@21bc000 {
+			ocotp: ocotp-ctrl@21bc000 {
 				compatible = "fsl,imx6q-ocotp", "syscon";
 				reg = <0x021bc000 0x4000>;
 				clocks = <&clks IMX6QDL_CLK_IIM>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				cpu_speed_grade: speed-grade@10 {
+					reg = <0x10 4>;
+				};
 			};
 
 			tzasc@21d0000 { /* TZASC1 */
diff --git a/arch/arm/boot/dts/imx6qp.dtsi b/arch/arm/boot/dts/imx6qp.dtsi
index 5f51f8e..b310f13 100644
--- a/arch/arm/boot/dts/imx6qp.dtsi
+++ b/arch/arm/boot/dts/imx6qp.dtsi
@@ -18,7 +18,7 @@ ocram3: sram@960000 {
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 
-		aips-bus@2100000 {
+		bus@2100000 {
 			pre1: pre@21c8000 {
 				compatible = "fsl,imx6qp-pre";
 				reg = <0x021c8000 0x1000>;
@@ -77,7 +77,6 @@ prg2: prg@21cd000 {
 };
 
 &fec {
-	/delete-property/interrupts-extended;
 	interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>,
 		     <0 119 IRQ_TYPE_LEVEL_HIGH>;
 };
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index 59c54e6..8230b45 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -74,6 +74,8 @@ cpu@0 {
 			arm-supply = <&reg_arm>;
 			pu-supply = <&reg_pu>;
 			soc-supply = <&reg_soc>;
+			nvmem-cells = <&cpu_speed_grade>;
+			nvmem-cell-names = "speed_grade";
 		};
 	};
 
@@ -143,7 +145,7 @@ L2: l2-cache@a02000 {
 			arm,data-latency = <4 2 3>;
 		};
 
-		aips1: aips-bus@2000000 {
+		aips1: bus@2000000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -380,7 +382,7 @@ pwm4: pwm@208c000 {
 				clock-names = "ipg", "per";
 			};
 
-			gpt: gpt@2098000 {
+			gpt: timer@2098000 {
 				compatible = "fsl,imx6sl-gpt";
 				reg = <0x02098000 0x4000>;
 				interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
@@ -491,7 +493,7 @@ gpio5: gpio@20ac000 {
 					      <&iomuxc 21 161 1>;
 			};
 
-			kpp: kpp@20b8000 {
+			kpp: keypad@20b8000 {
 				compatible = "fsl,imx6sl-kpp", "fsl,imx21-kpp";
 				reg = <0x020b8000 0x4000>;
 				interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
@@ -499,14 +501,14 @@ kpp: kpp@20b8000 {
 				status = "disabled";
 			};
 
-			wdog1: wdog@20bc000 {
+			wdog1: watchdog@20bc000 {
 				compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt";
 				reg = <0x020bc000 0x4000>;
 				interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SL_CLK_IPG>;
 			};
 
-			wdog2: wdog@20c0000 {
+			wdog2: watchdog@20c0000 {
 				compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt";
 				reg = <0x020c0000 0x4000>;
 				interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
@@ -514,7 +516,7 @@ wdog2: wdog@20c0000 {
 				status = "disabled";
 			};
 
-			clks: ccm@20c4000 {
+			clks: clock-controller@20c4000 {
 				compatible = "fsl,imx6sl-ccm";
 				reg = <0x020c4000 0x4000>;
 				interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
@@ -728,7 +730,7 @@ gpr: iomuxc-gpr@20e0000 {
 				reg = <0x020e0000 0x38>;
 			};
 
-			iomuxc: iomuxc@20e0000 {
+			iomuxc: pinctrl@20e0000 {
 				compatible = "fsl,imx6sl-iomuxc";
 				reg = <0x020e0000 0x4000>;
 			};
@@ -777,7 +779,7 @@ lcdif: lcdif@20f8000 {
 				power-domains = <&pd_disp>;
 			};
 
-			dcp: dcp@20fc000 {
+			dcp: crypto@20fc000 {
 				compatible = "fsl,imx6sl-dcp", "fsl,imx28-dcp";
 				reg = <0x020fc000 0x4000>;
 				interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>,
@@ -786,7 +788,7 @@ dcp: dcp@20fc000 {
 			};
 		};
 
-		aips2: aips-bus@2100000 {
+		aips2: bus@2100000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -949,10 +951,16 @@ weim: weim@21b8000 {
 				status = "disabled";
 			};
 
-			ocotp: ocotp@21bc000 {
+			ocotp: ocotp-ctrl@21bc000 {
 				compatible = "fsl,imx6sl-ocotp", "syscon";
 				reg = <0x021bc000 0x4000>;
 				clocks = <&clks IMX6SL_CLK_OCOTP>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				cpu_speed_grade: speed-grade@10 {
+					reg = <0x10 4>;
+				};
 			};
 
 			audmux: audmux@21d8000 {
diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi
index a1bc5bb3..edd3abb 100644
--- a/arch/arm/boot/dts/imx6sll.dtsi
+++ b/arch/arm/boot/dts/imx6sll.dtsi
@@ -72,6 +72,8 @@ cpu0: cpu@0 {
 				 <&clks IMX6SLL_CLK_PLL1_SYS>;
 			clock-names = "arm", "pll2_pfd2_396m", "step",
 				      "pll1_sw", "pll1_sys";
+			nvmem-cells = <&cpu_speed_grade>;
+			nvmem-cell-names = "speed_grade";
 		};
 	};
 
@@ -144,7 +146,7 @@ L2: l2-cache@a02000 {
 			arm,data-latency = <4 2 3>;
 		};
 
-		aips1: aips-bus@2000000 {
+		aips1: bus@2000000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -652,7 +654,7 @@ lcdif: lcd-controller@20f8000 {
 				status = "disabled";
 			};
 
-			dcp: dcp@20fc000 {
+			dcp: crypto@20fc000 {
 				compatible = "fsl,imx28-dcp";
 				reg = <0x020fc000 0x4000>;
 				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
@@ -663,7 +665,7 @@ dcp: dcp@20fc000 {
 			};
 		};
 
-		aips2: aips-bus@2100000 {
+		aips2: bus@2100000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -791,6 +793,10 @@ ocotp: ocotp-ctrl@21bc000 {
 				reg = <0x021bc000 0x4000>;
 				clocks = <&clks IMX6SLL_CLK_OCOTP>;
 
+				cpu_speed_grade: speed-grade@10 {
+					reg = <0x10 4>;
+				};
+
 				tempmon_calib: calib@38 {
 					reg = <0x38 4>;
 				};
diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
index 832b5c5..d84ea69 100644
--- a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
+++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
@@ -484,31 +484,31 @@ MX6SX_PAD_QSPI1A_SS0_B__GPIO4_IO_22	0xb0b0
 
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
-			MX6SX_PAD_GPIO1_IO04__UART1_TX		0x1b0b1
-			MX6SX_PAD_GPIO1_IO05__UART1_RX		0x1b0b1
+			MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX		0x1b0b1
+			MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX		0x1b0b1
 		>;
 	};
 
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
-			MX6SX_PAD_GPIO1_IO06__UART2_TX		0x1b0b1
-			MX6SX_PAD_GPIO1_IO07__UART2_RX		0x1b0b1
+			MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX		0x1b0b1
+			MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX		0x1b0b1
 		>;
 	};
 
 	pinctrl_uart3: uart3grp {
 		fsl,pins = <
-			MX6SX_PAD_QSPI1B_SS0_B__UART3_TX	0x1b0b1
-			MX6SX_PAD_QSPI1B_SCLK__UART3_RX		0x1b0b1
+			MX6SX_PAD_QSPI1B_SS0_B__UART3_DCE_TX		0x1b0b1
+			MX6SX_PAD_QSPI1B_SCLK__UART3_DCE_RX		0x1b0b1
 		>;
 	};
 
 	pinctrl_uart5: uart5grp {
 		fsl,pins = <
-			MX6SX_PAD_KEY_COL3__UART5_TX		0x1b0b1
-			MX6SX_PAD_KEY_ROW3__UART5_RX		0x1b0b1
-			MX6SX_PAD_SD3_DATA6__UART3_RTS_B	0x1b0b1
-			MX6SX_PAD_SD3_DATA7__UART3_CTS_B	0x1b0b1
+			MX6SX_PAD_KEY_COL3__UART5_DCE_TX		0x1b0b1
+			MX6SX_PAD_KEY_ROW3__UART5_DCE_RX		0x1b0b1
+			MX6SX_PAD_SD3_DATA6__UART3_DCE_RTS		0x1b0b1
+			MX6SX_PAD_SD3_DATA7__UART3_DCE_CTS		0x1b0b1
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx6sx-pinfunc.h b/arch/arm/boot/dts/imx6sx-pinfunc.h
index aa194a2..0b02c7e 100644
--- a/arch/arm/boot/dts/imx6sx-pinfunc.h
+++ b/arch/arm/boot/dts/imx6sx-pinfunc.h
@@ -42,8 +42,8 @@
 #define MX6SX_PAD_GPIO1_IO03__GPIO1_IO_3                          0x0020 0x0368 0x0000 0x5 0x0
 #define MX6SX_PAD_GPIO1_IO03__CCM_PLL3_BYP                        0x0020 0x0368 0x0000 0x6 0x0
 #define MX6SX_PAD_GPIO1_IO03__PHY_TCK                             0x0020 0x0368 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO04__UART1_RX                            0x0024 0x036C 0x0830 0x0 0x0
-#define MX6SX_PAD_GPIO1_IO04__UART1_TX                            0x0024 0x036C 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX                        0x0024 0x036C 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO04__UART1_DTE_RX                        0x0024 0x036C 0x0830 0x0 0x0
 #define MX6SX_PAD_GPIO1_IO04__USDHC2_RESET_B                      0x0024 0x036C 0x0000 0x1 0x0
 #define MX6SX_PAD_GPIO1_IO04__ENET1_MDC                           0x0024 0x036C 0x0000 0x2 0x0
 #define MX6SX_PAD_GPIO1_IO04__OSC32K_32K_OUT                      0x0024 0x036C 0x0000 0x3 0x0
@@ -51,8 +51,8 @@
 #define MX6SX_PAD_GPIO1_IO04__GPIO1_IO_4                          0x0024 0x036C 0x0000 0x5 0x0
 #define MX6SX_PAD_GPIO1_IO04__CCM_PLL2_BYP                        0x0024 0x036C 0x0000 0x6 0x0
 #define MX6SX_PAD_GPIO1_IO04__PHY_TMS                             0x0024 0x036C 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO05__UART1_RX                            0x0028 0x0370 0x0830 0x0 0x1
-#define MX6SX_PAD_GPIO1_IO05__UART1_TX                            0x0028 0x0370 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX                        0x0028 0x0370 0x0830 0x0 0x1
+#define MX6SX_PAD_GPIO1_IO05__UART1_DTE_TX                        0x0028 0x0370 0x0000 0x0 0x0
 #define MX6SX_PAD_GPIO1_IO05__USDHC2_VSELECT                      0x0028 0x0370 0x0000 0x1 0x0
 #define MX6SX_PAD_GPIO1_IO05__ENET1_MDIO                          0x0028 0x0370 0x0764 0x2 0x0
 #define MX6SX_PAD_GPIO1_IO05__ASRC_ASRC_EXT_CLK                   0x0028 0x0370 0x0000 0x3 0x0
@@ -60,21 +60,23 @@
 #define MX6SX_PAD_GPIO1_IO05__GPIO1_IO_5                          0x0028 0x0370 0x0000 0x5 0x0
 #define MX6SX_PAD_GPIO1_IO05__SRC_TESTER_ACK                      0x0028 0x0370 0x0000 0x6 0x0
 #define MX6SX_PAD_GPIO1_IO05__PHY_TDO                             0x0028 0x0370 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO06__UART2_RX                            0x002C 0x0374 0x0838 0x0 0x0
-#define MX6SX_PAD_GPIO1_IO06__UART2_TX                            0x002C 0x0374 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX                        0x002C 0x0374 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO06__UART2_DTE_RX                        0x002C 0x0374 0x0838 0x0 0x0
 #define MX6SX_PAD_GPIO1_IO06__USDHC2_CD_B                         0x002C 0x0374 0x086C 0x1 0x1
 #define MX6SX_PAD_GPIO1_IO06__ENET2_MDC                           0x002C 0x0374 0x0000 0x2 0x0
 #define MX6SX_PAD_GPIO1_IO06__CSI1_MCLK                           0x002C 0x0374 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO06__UART1_RTS_B                         0x002C 0x0374 0x082C 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO06__UART1_DCE_RTS                       0x002C 0x0374 0x082C 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO06__UART1_DTE_CTS                       0x002C 0x0374 0x0000 0x4 0x0
 #define MX6SX_PAD_GPIO1_IO06__GPIO1_IO_6                          0x002C 0x0374 0x0000 0x5 0x0
 #define MX6SX_PAD_GPIO1_IO06__SRC_ANY_PU_RESET                    0x002C 0x0374 0x0000 0x6 0x0
 #define MX6SX_PAD_GPIO1_IO06__OCOTP_CTRL_WRAPPER_FUSE_LATCHED     0x002C 0x0374 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO07__UART2_RX                            0x0030 0x0378 0x0838 0x0 0x1
-#define MX6SX_PAD_GPIO1_IO07__UART2_TX                            0x0030 0x0378 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX                        0x0030 0x0378 0x0838 0x0 0x1
+#define MX6SX_PAD_GPIO1_IO07__UART2_DTE_TX                        0x0030 0x0378 0x0000 0x0 0x0
 #define MX6SX_PAD_GPIO1_IO07__USDHC2_WP                           0x0030 0x0378 0x0870 0x1 0x1
 #define MX6SX_PAD_GPIO1_IO07__ENET2_MDIO                          0x0030 0x0378 0x0770 0x2 0x0
 #define MX6SX_PAD_GPIO1_IO07__AUDMUX_MCLK                         0x0030 0x0378 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO07__UART1_CTS_B                         0x0030 0x0378 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO07__UART1_DCE_CTS                       0x0030 0x0378 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO07__UART1_DTE_RTS                       0x0030 0x0378 0x082C 0x4 0x1
 #define MX6SX_PAD_GPIO1_IO07__GPIO1_IO_7                          0x0030 0x0378 0x0000 0x5 0x0
 #define MX6SX_PAD_GPIO1_IO07__SRC_EARLY_RESET                     0x0030 0x0378 0x0000 0x6 0x0
 #define MX6SX_PAD_GPIO1_IO07__DCIC2_OUT                           0x0030 0x0378 0x0000 0x7 0x0
@@ -83,7 +85,8 @@
 #define MX6SX_PAD_GPIO1_IO08__WDOG1_WDOG_B                        0x0034 0x037C 0x0000 0x1 0x0
 #define MX6SX_PAD_GPIO1_IO08__SDMA_EXT_EVENT_0                    0x0034 0x037C 0x081C 0x2 0x0
 #define MX6SX_PAD_GPIO1_IO08__CCM_PMIC_RDY                        0x0034 0x037C 0x069C 0x3 0x1
-#define MX6SX_PAD_GPIO1_IO08__UART2_RTS_B                         0x0034 0x037C 0x0834 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO08__UART2_DCE_RTS                       0x0034 0x037C 0x0834 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO08__UART2_DTE_CTS                       0x0034 0x037C 0x0000 0x4 0x0
 #define MX6SX_PAD_GPIO1_IO08__GPIO1_IO_8                          0x0034 0x037C 0x0000 0x5 0x0
 #define MX6SX_PAD_GPIO1_IO08__SRC_SYSTEM_RESET                    0x0034 0x037C 0x0000 0x6 0x0
 #define MX6SX_PAD_GPIO1_IO08__DCIC1_OUT                           0x0034 0x037C 0x0000 0x7 0x0
@@ -92,7 +95,8 @@
 #define MX6SX_PAD_GPIO1_IO09__WDOG2_WDOG_B                        0x0038 0x0380 0x0000 0x1 0x0
 #define MX6SX_PAD_GPIO1_IO09__SDMA_EXT_EVENT_1                    0x0038 0x0380 0x0820 0x2 0x0
 #define MX6SX_PAD_GPIO1_IO09__CCM_OUT0                            0x0038 0x0380 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO09__UART2_CTS_B                         0x0038 0x0380 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO09__UART2_DCE_CTS                       0x0038 0x0380 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO09__UART2_DTE_RTS                       0x0038 0x0380 0x0834 0x4 0x1
 #define MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9                          0x0038 0x0380 0x0000 0x5 0x0
 #define MX6SX_PAD_GPIO1_IO09__SRC_INT_BOOT                        0x0038 0x0380 0x0000 0x6 0x0
 #define MX6SX_PAD_GPIO1_IO09__OBSERVE_MUX_OUT_4                   0x0038 0x0380 0x0000 0x7 0x0
@@ -177,8 +181,8 @@
 #define MX6SX_PAD_CSI_DATA04__ESAI_TX1                            0x005C 0x03A4 0x0794 0x1 0x1
 #define MX6SX_PAD_CSI_DATA04__SPDIF_OUT                           0x005C 0x03A4 0x0000 0x2 0x0
 #define MX6SX_PAD_CSI_DATA04__KPP_COL_6                           0x005C 0x03A4 0x07CC 0x3 0x0
-#define MX6SX_PAD_CSI_DATA04__UART6_RX                            0x005C 0x03A4 0x0858 0x4 0x0
-#define MX6SX_PAD_CSI_DATA04__UART6_TX                            0x005C 0x03A4 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA04__UART6_DCE_RX                        0x005C 0x03A4 0x0858 0x4 0x0
+#define MX6SX_PAD_CSI_DATA04__UART6_DTE_TX                        0x005C 0x03A4 0x0000 0x4 0x0
 #define MX6SX_PAD_CSI_DATA04__GPIO1_IO_18                         0x005C 0x03A4 0x0000 0x5 0x0
 #define MX6SX_PAD_CSI_DATA04__WEIM_DATA_19                        0x005C 0x03A4 0x0000 0x6 0x0
 #define MX6SX_PAD_CSI_DATA04__PWM5_OUT                            0x005C 0x03A4 0x0000 0x7 0x0
@@ -188,8 +192,8 @@
 #define MX6SX_PAD_CSI_DATA05__ESAI_TX4_RX1                        0x0060 0x03A8 0x07A0 0x1 0x1
 #define MX6SX_PAD_CSI_DATA05__SPDIF_IN                            0x0060 0x03A8 0x0824 0x2 0x1
 #define MX6SX_PAD_CSI_DATA05__KPP_ROW_6                           0x0060 0x03A8 0x07D8 0x3 0x0
-#define MX6SX_PAD_CSI_DATA05__UART6_RX                            0x0060 0x03A8 0x0858 0x4 0x1
-#define MX6SX_PAD_CSI_DATA05__UART6_TX                            0x0060 0x03A8 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA05__UART6_DCE_TX                        0x0060 0x03A8 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA05__UART6_DTE_RX                        0x0060 0x03A8 0x0858 0x4 0x1
 #define MX6SX_PAD_CSI_DATA05__GPIO1_IO_19                         0x0060 0x03A8 0x0000 0x5 0x0
 #define MX6SX_PAD_CSI_DATA05__WEIM_DATA_18                        0x0060 0x03A8 0x0000 0x6 0x0
 #define MX6SX_PAD_CSI_DATA05__PWM6_OUT                            0x0060 0x03A8 0x0000 0x7 0x0
@@ -199,7 +203,8 @@
 #define MX6SX_PAD_CSI_DATA06__ESAI_TX2_RX3                        0x0064 0x03AC 0x0798 0x1 0x1
 #define MX6SX_PAD_CSI_DATA06__I2C4_SCL                            0x0064 0x03AC 0x07C0 0x2 0x2
 #define MX6SX_PAD_CSI_DATA06__KPP_COL_7                           0x0064 0x03AC 0x07D0 0x3 0x0
-#define MX6SX_PAD_CSI_DATA06__UART6_RTS_B                         0x0064 0x03AC 0x0854 0x4 0x0
+#define MX6SX_PAD_CSI_DATA06__UART6_DCE_RTS                       0x0064 0x03AC 0x0854 0x4 0x0
+#define MX6SX_PAD_CSI_DATA06__UART6_DTE_CTS                       0x0064 0x03AC 0x0000 0x4 0x0
 #define MX6SX_PAD_CSI_DATA06__GPIO1_IO_20                         0x0064 0x03AC 0x0000 0x5 0x0
 #define MX6SX_PAD_CSI_DATA06__WEIM_DATA_17                        0x0064 0x03AC 0x0000 0x6 0x0
 #define MX6SX_PAD_CSI_DATA06__DCIC2_OUT                           0x0064 0x03AC 0x0000 0x7 0x0
@@ -209,7 +214,8 @@
 #define MX6SX_PAD_CSI_DATA07__ESAI_TX3_RX2                        0x0068 0x03B0 0x079C 0x1 0x1
 #define MX6SX_PAD_CSI_DATA07__I2C4_SDA                            0x0068 0x03B0 0x07C4 0x2 0x2
 #define MX6SX_PAD_CSI_DATA07__KPP_ROW_7                           0x0068 0x03B0 0x07DC 0x3 0x0
-#define MX6SX_PAD_CSI_DATA07__UART6_CTS_B                         0x0068 0x03B0 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA07__UART6_DCE_CTS                       0x0068 0x03B0 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA07__UART6_DTE_RTS                       0x0068 0x03B0 0x0854 0x4 0x1
 #define MX6SX_PAD_CSI_DATA07__GPIO1_IO_21                         0x0068 0x03B0 0x0000 0x5 0x0
 #define MX6SX_PAD_CSI_DATA07__WEIM_DATA_16                        0x0068 0x03B0 0x0000 0x6 0x0
 #define MX6SX_PAD_CSI_DATA07__DCIC1_OUT                           0x0068 0x03B0 0x0000 0x7 0x0
@@ -218,7 +224,8 @@
 #define MX6SX_PAD_CSI_HSYNC__CSI1_HSYNC                           0x006C 0x03B4 0x0700 0x0 0x0
 #define MX6SX_PAD_CSI_HSYNC__ESAI_TX0                             0x006C 0x03B4 0x0790 0x1 0x1
 #define MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD                      0x006C 0x03B4 0x0678 0x2 0x1
-#define MX6SX_PAD_CSI_HSYNC__UART4_RTS_B                          0x006C 0x03B4 0x0844 0x3 0x2
+#define MX6SX_PAD_CSI_HSYNC__UART4_DCE_RTS                        0x006C 0x03B4 0x0844 0x3 0x2
+#define MX6SX_PAD_CSI_HSYNC__UART4_DTE_CTS                        0x006C 0x03B4 0x0000 0x3 0x0
 #define MX6SX_PAD_CSI_HSYNC__MQS_LEFT                             0x006C 0x03B4 0x0000 0x4 0x0
 #define MX6SX_PAD_CSI_HSYNC__GPIO1_IO_22                          0x006C 0x03B4 0x0000 0x5 0x0
 #define MX6SX_PAD_CSI_HSYNC__WEIM_DATA_25                         0x006C 0x03B4 0x0000 0x6 0x0
@@ -228,8 +235,8 @@
 #define MX6SX_PAD_CSI_MCLK__CSI1_MCLK                             0x0070 0x03B8 0x0000 0x0 0x0
 #define MX6SX_PAD_CSI_MCLK__ESAI_TX_HF_CLK                        0x0070 0x03B8 0x0784 0x1 0x1
 #define MX6SX_PAD_CSI_MCLK__OSC32K_32K_OUT                        0x0070 0x03B8 0x0000 0x2 0x0
-#define MX6SX_PAD_CSI_MCLK__UART4_RX                              0x0070 0x03B8 0x0848 0x3 0x2
-#define MX6SX_PAD_CSI_MCLK__UART4_TX                              0x0070 0x03B8 0x0000 0x3 0x0
+#define MX6SX_PAD_CSI_MCLK__UART4_DCE_RX                          0x0070 0x03B8 0x0848 0x3 0x2
+#define MX6SX_PAD_CSI_MCLK__UART4_DTE_TX                          0x0070 0x03B8 0x0000 0x3 0x0
 #define MX6SX_PAD_CSI_MCLK__ANATOP_32K_OUT                        0x0070 0x03B8 0x0000 0x4 0x0
 #define MX6SX_PAD_CSI_MCLK__GPIO1_IO_23                           0x0070 0x03B8 0x0000 0x5 0x0
 #define MX6SX_PAD_CSI_MCLK__WEIM_DATA_26                          0x0070 0x03B8 0x0000 0x6 0x0
@@ -239,8 +246,8 @@
 #define MX6SX_PAD_CSI_PIXCLK__CSI1_PIXCLK                         0x0074 0x03BC 0x0704 0x0 0x0
 #define MX6SX_PAD_CSI_PIXCLK__ESAI_RX_HF_CLK                      0x0074 0x03BC 0x0780 0x1 0x1
 #define MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK                         0x0074 0x03BC 0x0000 0x2 0x0
-#define MX6SX_PAD_CSI_PIXCLK__UART4_RX                            0x0074 0x03BC 0x0848 0x3 0x3
-#define MX6SX_PAD_CSI_PIXCLK__UART4_TX                            0x0074 0x03BC 0x0000 0x3 0x0
+#define MX6SX_PAD_CSI_PIXCLK__UART4_DCE_TX                        0x0074 0x03BC 0x0000 0x3 0x0
+#define MX6SX_PAD_CSI_PIXCLK__UART4_DTE_RX                        0x0074 0x03BC 0x0848 0x3 0x3
 #define MX6SX_PAD_CSI_PIXCLK__ANATOP_24M_OUT                      0x0074 0x03BC 0x0000 0x4 0x0
 #define MX6SX_PAD_CSI_PIXCLK__GPIO1_IO_24                         0x0074 0x03BC 0x0000 0x5 0x0
 #define MX6SX_PAD_CSI_PIXCLK__WEIM_DATA_27                        0x0074 0x03BC 0x0000 0x6 0x0
@@ -250,7 +257,8 @@
 #define MX6SX_PAD_CSI_VSYNC__CSI1_VSYNC                           0x0078 0x03C0 0x0708 0x0 0x0
 #define MX6SX_PAD_CSI_VSYNC__ESAI_TX5_RX0                         0x0078 0x03C0 0x07A4 0x1 0x1
 #define MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD                      0x0078 0x03C0 0x0674 0x2 0x1
-#define MX6SX_PAD_CSI_VSYNC__UART4_CTS_B                          0x0078 0x03C0 0x0000 0x3 0x0
+#define MX6SX_PAD_CSI_VSYNC__UART4_DCE_CTS                        0x0078 0x03C0 0x0000 0x3 0x0
+#define MX6SX_PAD_CSI_VSYNC__UART4_DTE_RTS                        0x0078 0x03C0 0x0844 0x3 0x3
 #define MX6SX_PAD_CSI_VSYNC__MQS_RIGHT                            0x0078 0x03C0 0x0000 0x4 0x0
 #define MX6SX_PAD_CSI_VSYNC__GPIO1_IO_25                          0x0078 0x03C0 0x0000 0x5 0x0
 #define MX6SX_PAD_CSI_VSYNC__WEIM_DATA_24                         0x0078 0x03C0 0x0000 0x6 0x0
@@ -330,8 +338,8 @@
 #define MX6SX_PAD_ENET2_COL__ENET2_COL                            0x0094 0x03DC 0x0000 0x0 0x0
 #define MX6SX_PAD_ENET2_COL__ENET1_MDC                            0x0094 0x03DC 0x0000 0x1 0x0
 #define MX6SX_PAD_ENET2_COL__AUDMUX_AUD4_RXC                      0x0094 0x03DC 0x064C 0x2 0x1
-#define MX6SX_PAD_ENET2_COL__UART1_RX                             0x0094 0x03DC 0x0830 0x3 0x2
-#define MX6SX_PAD_ENET2_COL__UART1_TX                             0x0094 0x03DC 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET2_COL__UART1_DCE_RX                         0x0094 0x03DC 0x0830 0x3 0x2
+#define MX6SX_PAD_ENET2_COL__UART1_DTE_TX                         0x0094 0x03DC 0x0000 0x3 0x0
 #define MX6SX_PAD_ENET2_COL__SPDIF_IN                             0x0094 0x03DC 0x0824 0x4 0x3
 #define MX6SX_PAD_ENET2_COL__GPIO2_IO_6                           0x0094 0x03DC 0x0000 0x5 0x0
 #define MX6SX_PAD_ENET2_COL__ANATOP_OTG1_ID                       0x0094 0x03DC 0x0624 0x6 0x1
@@ -341,8 +349,8 @@
 #define MX6SX_PAD_ENET2_CRS__ENET2_CRS                            0x0098 0x03E0 0x0000 0x0 0x0
 #define MX6SX_PAD_ENET2_CRS__ENET1_MDIO                           0x0098 0x03E0 0x0764 0x1 0x2
 #define MX6SX_PAD_ENET2_CRS__AUDMUX_AUD4_RXFS                     0x0098 0x03E0 0x0650 0x2 0x1
-#define MX6SX_PAD_ENET2_CRS__UART1_RX                             0x0098 0x03E0 0x0830 0x3 0x3
-#define MX6SX_PAD_ENET2_CRS__UART1_TX                             0x0098 0x03E0 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET2_CRS__UART1_DCE_TX                         0x0098 0x03E0 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET2_CRS__UART1_DTE_RX                         0x0098 0x03E0 0x0830 0x3 0x3
 #define MX6SX_PAD_ENET2_CRS__MLB_SIG                              0x0098 0x03E0 0x07F0 0x4 0x1
 #define MX6SX_PAD_ENET2_CRS__GPIO2_IO_7                           0x0098 0x03E0 0x0000 0x5 0x0
 #define MX6SX_PAD_ENET2_CRS__ANATOP_OTG2_ID                       0x0098 0x03E0 0x0628 0x6 0x1
@@ -352,7 +360,8 @@
 #define MX6SX_PAD_ENET2_RX_CLK__ENET2_RX_CLK                      0x009C 0x03E4 0x0774 0x0 0x0
 #define MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M                 0x009C 0x03E4 0x0000 0x1 0x0
 #define MX6SX_PAD_ENET2_RX_CLK__I2C3_SCL                          0x009C 0x03E4 0x07B8 0x2 0x1
-#define MX6SX_PAD_ENET2_RX_CLK__UART1_RTS_B                       0x009C 0x03E4 0x082C 0x3 0x2
+#define MX6SX_PAD_ENET2_RX_CLK__UART1_DCE_RTS                     0x009C 0x03E4 0x082C 0x3 0x2
+#define MX6SX_PAD_ENET2_RX_CLK__UART1_DTE_CTS                     0x009C 0x03E4 0x0000 0x3 0x0
 #define MX6SX_PAD_ENET2_RX_CLK__MLB_DATA                          0x009C 0x03E4 0x07EC 0x4 0x1
 #define MX6SX_PAD_ENET2_RX_CLK__GPIO2_IO_8                        0x009C 0x03E4 0x0000 0x5 0x0
 #define MX6SX_PAD_ENET2_RX_CLK__USB_OTG2_OC                       0x009C 0x03E4 0x085C 0x6 0x1
@@ -362,7 +371,8 @@
 #define MX6SX_PAD_ENET2_TX_CLK__ENET2_TX_CLK                      0x00A0 0x03E8 0x0000 0x0 0x0
 #define MX6SX_PAD_ENET2_TX_CLK__ENET2_REF_CLK2                    0x00A0 0x03E8 0x076C 0x1 0x1
 #define MX6SX_PAD_ENET2_TX_CLK__I2C3_SDA                          0x00A0 0x03E8 0x07BC 0x2 0x1
-#define MX6SX_PAD_ENET2_TX_CLK__UART1_CTS_B                       0x00A0 0x03E8 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET2_TX_CLK__UART1_DCE_CTS                     0x00A0 0x03E8 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET2_TX_CLK__UART1_DTE_RTS                     0x00A0 0x03E8 0x082C 0x3 0x3
 #define MX6SX_PAD_ENET2_TX_CLK__MLB_CLK                           0x00A0 0x03E8 0x07E8 0x4 0x1
 #define MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9                        0x00A0 0x03E8 0x0000 0x5 0x0
 #define MX6SX_PAD_ENET2_TX_CLK__USB_OTG2_PWR                      0x00A0 0x03E8 0x0000 0x6 0x0
@@ -371,7 +381,8 @@
 #define MX6SX_PAD_ENET2_TX_CLK__PCIE_CTRL_DEBUG_24                0x00A0 0x03E8 0x0000 0x9 0x0
 #define MX6SX_PAD_KEY_COL0__KPP_COL_0                             0x00A4 0x03EC 0x0000 0x0 0x0
 #define MX6SX_PAD_KEY_COL0__USDHC3_CD_B                           0x00A4 0x03EC 0x0000 0x1 0x0
-#define MX6SX_PAD_KEY_COL0__UART6_RTS_B                           0x00A4 0x03EC 0x0854 0x2 0x2
+#define MX6SX_PAD_KEY_COL0__UART6_DCE_RTS                         0x00A4 0x03EC 0x0854 0x2 0x2
+#define MX6SX_PAD_KEY_COL0__UART6_DTE_CTS                         0x00A4 0x03EC 0x0000 0x2 0x0
 #define MX6SX_PAD_KEY_COL0__ECSPI1_SCLK                           0x00A4 0x03EC 0x0710 0x3 0x0
 #define MX6SX_PAD_KEY_COL0__AUDMUX_AUD5_TXC                       0x00A4 0x03EC 0x066C 0x4 0x0
 #define MX6SX_PAD_KEY_COL0__GPIO2_IO_10                           0x00A4 0x03EC 0x0000 0x5 0x0
@@ -380,8 +391,8 @@
 #define MX6SX_PAD_KEY_COL0__VADC_DATA_0                           0x00A4 0x03EC 0x0000 0x8 0x0
 #define MX6SX_PAD_KEY_COL1__KPP_COL_1                             0x00A8 0x03F0 0x0000 0x0 0x0
 #define MX6SX_PAD_KEY_COL1__USDHC3_RESET_B                        0x00A8 0x03F0 0x0000 0x1 0x0
-#define MX6SX_PAD_KEY_COL1__UART6_RX                              0x00A8 0x03F0 0x0858 0x2 0x2
-#define MX6SX_PAD_KEY_COL1__UART6_TX                              0x00A8 0x03F0 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_COL1__UART6_DCE_TX                          0x00A8 0x03F0 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_COL1__UART6_DTE_RX                          0x00A8 0x03F0 0x0858 0x2 0x2
 #define MX6SX_PAD_KEY_COL1__ECSPI1_MISO                           0x00A8 0x03F0 0x0714 0x3 0x0
 #define MX6SX_PAD_KEY_COL1__AUDMUX_AUD5_TXFS                      0x00A8 0x03F0 0x0670 0x4 0x0
 #define MX6SX_PAD_KEY_COL1__GPIO2_IO_11                           0x00A8 0x03F0 0x0000 0x5 0x0
@@ -389,7 +400,8 @@
 #define MX6SX_PAD_KEY_COL1__SAI2_TX_SYNC                          0x00A8 0x03F0 0x0818 0x7 0x0
 #define MX6SX_PAD_KEY_COL2__KPP_COL_2                             0x00AC 0x03F4 0x0000 0x0 0x0
 #define MX6SX_PAD_KEY_COL2__USDHC4_CD_B                           0x00AC 0x03F4 0x0874 0x1 0x1
-#define MX6SX_PAD_KEY_COL2__UART5_RTS_B                           0x00AC 0x03F4 0x084C 0x2 0x2
+#define MX6SX_PAD_KEY_COL2__UART5_DCE_RTS                         0x00AC 0x03F4 0x084C 0x2 0x2
+#define MX6SX_PAD_KEY_COL2__UART5_DTE_CTS                         0x00AC 0x03F4 0x0000 0x2 0x0
 #define MX6SX_PAD_KEY_COL2__CAN1_TX                               0x00AC 0x03F4 0x0000 0x3 0x0
 #define MX6SX_PAD_KEY_COL2__CANFD_TX1                             0x00AC 0x03F4 0x0000 0x4 0x0
 #define MX6SX_PAD_KEY_COL2__GPIO2_IO_12                           0x00AC 0x03F4 0x0000 0x5 0x0
@@ -397,8 +409,8 @@
 #define MX6SX_PAD_KEY_COL2__ECSPI1_RDY                            0x00AC 0x03F4 0x0000 0x7 0x0
 #define MX6SX_PAD_KEY_COL3__KPP_COL_3                             0x00B0 0x03F8 0x0000 0x0 0x0
 #define MX6SX_PAD_KEY_COL3__USDHC4_LCTL                           0x00B0 0x03F8 0x0000 0x1 0x0
-#define MX6SX_PAD_KEY_COL3__UART5_RX                              0x00B0 0x03F8 0x0850 0x2 0x2
-#define MX6SX_PAD_KEY_COL3__UART5_TX                              0x00B0 0x03F8 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_COL3__UART5_DCE_TX                          0x00B0 0x03F8 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_COL3__UART5_DTE_RX                          0x00B0 0x03F8 0x0850 0x2 0x2
 #define MX6SX_PAD_KEY_COL3__CAN2_TX                               0x00B0 0x03F8 0x0000 0x3 0x0
 #define MX6SX_PAD_KEY_COL3__CANFD_TX2                             0x00B0 0x03F8 0x0000 0x4 0x0
 #define MX6SX_PAD_KEY_COL3__GPIO2_IO_13                           0x00B0 0x03F8 0x0000 0x5 0x0
@@ -414,7 +426,8 @@
 #define MX6SX_PAD_KEY_COL4__SAI2_RX_BCLK                          0x00B4 0x03FC 0x0808 0x7 0x0
 #define MX6SX_PAD_KEY_ROW0__KPP_ROW_0                             0x00B8 0x0400 0x0000 0x0 0x0
 #define MX6SX_PAD_KEY_ROW0__USDHC3_WP                             0x00B8 0x0400 0x0000 0x1 0x0
-#define MX6SX_PAD_KEY_ROW0__UART6_CTS_B                           0x00B8 0x0400 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_ROW0__UART6_DCE_CTS                         0x00B8 0x0400 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_ROW0__UART6_DTE_RTS                         0x00B8 0x0400 0x0854 0x2 0x3
 #define MX6SX_PAD_KEY_ROW0__ECSPI1_MOSI                           0x00B8 0x0400 0x0718 0x3 0x0
 #define MX6SX_PAD_KEY_ROW0__AUDMUX_AUD5_TXD                       0x00B8 0x0400 0x0660 0x4 0x0
 #define MX6SX_PAD_KEY_ROW0__GPIO2_IO_15                           0x00B8 0x0400 0x0000 0x5 0x0
@@ -423,8 +436,8 @@
 #define MX6SX_PAD_KEY_ROW0__GPU_IDLE                              0x00B8 0x0400 0x0000 0x8 0x0
 #define MX6SX_PAD_KEY_ROW1__KPP_ROW_1                             0x00BC 0x0404 0x0000 0x0 0x0
 #define MX6SX_PAD_KEY_ROW1__USDHC4_VSELECT                        0x00BC 0x0404 0x0000 0x1 0x0
-#define MX6SX_PAD_KEY_ROW1__UART6_RX                              0x00BC 0x0404 0x0858 0x2 0x3
-#define MX6SX_PAD_KEY_ROW1__UART6_TX                              0x00BC 0x0404 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_ROW1__UART6_DCE_RX                          0x00BC 0x0404 0x0858 0x2 0x3
+#define MX6SX_PAD_KEY_ROW1__UART6_DTE_TX                          0x00BC 0x0404 0x0000 0x2 0x0
 #define MX6SX_PAD_KEY_ROW1__ECSPI1_SS0                            0x00BC 0x0404 0x071C 0x3 0x0
 #define MX6SX_PAD_KEY_ROW1__AUDMUX_AUD5_RXD                       0x00BC 0x0404 0x065C 0x4 0x0
 #define MX6SX_PAD_KEY_ROW1__GPIO2_IO_16                           0x00BC 0x0404 0x0000 0x5 0x0
@@ -433,7 +446,8 @@
 #define MX6SX_PAD_KEY_ROW1__M4_NMI                                0x00BC 0x0404 0x0000 0x8 0x0
 #define MX6SX_PAD_KEY_ROW2__KPP_ROW_2                             0x00C0 0x0408 0x0000 0x0 0x0
 #define MX6SX_PAD_KEY_ROW2__USDHC4_WP                             0x00C0 0x0408 0x0878 0x1 0x1
-#define MX6SX_PAD_KEY_ROW2__UART5_CTS_B                           0x00C0 0x0408 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_ROW2__UART5_DCE_CTS                         0x00C0 0x0408 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_ROW2__UART5_DTE_RTS                         0x00C0 0x0408 0x084C 0x2 0x3
 #define MX6SX_PAD_KEY_ROW2__CAN1_RX                               0x00C0 0x0408 0x068C 0x3 0x1
 #define MX6SX_PAD_KEY_ROW2__CANFD_RX1                             0x00C0 0x0408 0x0694 0x4 0x1
 #define MX6SX_PAD_KEY_ROW2__GPIO2_IO_17                           0x00C0 0x0408 0x0000 0x5 0x0
@@ -441,8 +455,8 @@
 #define MX6SX_PAD_KEY_ROW2__ECSPI1_SS3                            0x00C0 0x0408 0x0000 0x7 0x0
 #define MX6SX_PAD_KEY_ROW3__KPP_ROW_3                             0x00C4 0x040C 0x0000 0x0 0x0
 #define MX6SX_PAD_KEY_ROW3__USDHC3_LCTL                           0x00C4 0x040C 0x0000 0x1 0x0
-#define MX6SX_PAD_KEY_ROW3__UART5_RX                              0x00C4 0x040C 0x0850 0x2 0x3
-#define MX6SX_PAD_KEY_ROW3__UART5_TX                              0x00C4 0x040C 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_ROW3__UART5_DCE_RX                          0x00C4 0x040C 0x0850 0x2 0x3
+#define MX6SX_PAD_KEY_ROW3__UART5_DTE_TX                          0x00C4 0x040C 0x0000 0x2 0x0
 #define MX6SX_PAD_KEY_ROW3__CAN2_RX                               0x00C4 0x040C 0x0690 0x3 0x1
 #define MX6SX_PAD_KEY_ROW3__CANFD_RX2                             0x00C4 0x040C 0x0698 0x4 0x1
 #define MX6SX_PAD_KEY_ROW3__GPIO2_IO_18                           0x00C4 0x040C 0x0000 0x5 0x0
@@ -815,7 +829,8 @@
 #define MX6SX_PAD_NAND_DATA04__RAWNAND_DATA04                     0x0160 0x04A8 0x0000 0x0 0x0
 #define MX6SX_PAD_NAND_DATA04__USDHC2_DATA4                       0x0160 0x04A8 0x0000 0x1 0x0
 #define MX6SX_PAD_NAND_DATA04__QSPI2_B_SS1_B                      0x0160 0x04A8 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_DATA04__UART3_RTS_B                        0x0160 0x04A8 0x083C 0x3 0x0
+#define MX6SX_PAD_NAND_DATA04__UART3_DCE_RTS                      0x0160 0x04A8 0x083C 0x3 0x0
+#define MX6SX_PAD_NAND_DATA04__UART3_DTE_CTS                      0x0160 0x04A8 0x0000 0x3 0x0
 #define MX6SX_PAD_NAND_DATA04__AUDMUX_AUD4_RXFS                   0x0160 0x04A8 0x0650 0x4 0x0
 #define MX6SX_PAD_NAND_DATA04__GPIO4_IO_8                         0x0160 0x04A8 0x0000 0x5 0x0
 #define MX6SX_PAD_NAND_DATA04__WEIM_AD_4                          0x0160 0x04A8 0x0000 0x6 0x0
@@ -825,7 +840,8 @@
 #define MX6SX_PAD_NAND_DATA05__RAWNAND_DATA05                     0x0164 0x04AC 0x0000 0x0 0x0
 #define MX6SX_PAD_NAND_DATA05__USDHC2_DATA5                       0x0164 0x04AC 0x0000 0x1 0x0
 #define MX6SX_PAD_NAND_DATA05__QSPI2_B_DQS                        0x0164 0x04AC 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_DATA05__UART3_CTS_B                        0x0164 0x04AC 0x0000 0x3 0x0
+#define MX6SX_PAD_NAND_DATA05__UART3_DCE_CTS                      0x0164 0x04AC 0x0000 0x3 0x0
+#define MX6SX_PAD_NAND_DATA05__UART3_DTE_RTS                      0x0164 0x04AC 0x083C 0x3 0x1
 #define MX6SX_PAD_NAND_DATA05__AUDMUX_AUD4_RXC                    0x0164 0x04AC 0x064C 0x4 0x0
 #define MX6SX_PAD_NAND_DATA05__GPIO4_IO_9                         0x0164 0x04AC 0x0000 0x5 0x0
 #define MX6SX_PAD_NAND_DATA05__WEIM_AD_5                          0x0164 0x04AC 0x0000 0x6 0x0
@@ -835,8 +851,8 @@
 #define MX6SX_PAD_NAND_DATA06__RAWNAND_DATA06                     0x0168 0x04B0 0x0000 0x0 0x0
 #define MX6SX_PAD_NAND_DATA06__USDHC2_DATA6                       0x0168 0x04B0 0x0000 0x1 0x0
 #define MX6SX_PAD_NAND_DATA06__QSPI2_A_SS1_B                      0x0168 0x04B0 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_DATA06__UART3_RX                           0x0168 0x04B0 0x0840 0x3 0x0
-#define MX6SX_PAD_NAND_DATA06__UART3_TX                           0x0168 0x04B0 0x0000 0x3 0x0
+#define MX6SX_PAD_NAND_DATA06__UART3_DCE_RX                       0x0168 0x04B0 0x0840 0x3 0x0
+#define MX6SX_PAD_NAND_DATA06__UART3_DTE_TX                       0x0168 0x04B0 0x0000 0x3 0x0
 #define MX6SX_PAD_NAND_DATA06__PWM3_OUT                           0x0168 0x04B0 0x0000 0x4 0x0
 #define MX6SX_PAD_NAND_DATA06__GPIO4_IO_10                        0x0168 0x04B0 0x0000 0x5 0x0
 #define MX6SX_PAD_NAND_DATA06__WEIM_AD_6                          0x0168 0x04B0 0x0000 0x6 0x0
@@ -846,8 +862,8 @@
 #define MX6SX_PAD_NAND_DATA07__RAWNAND_DATA07                     0x016C 0x04B4 0x0000 0x0 0x0
 #define MX6SX_PAD_NAND_DATA07__USDHC2_DATA7                       0x016C 0x04B4 0x0000 0x1 0x0
 #define MX6SX_PAD_NAND_DATA07__QSPI2_A_DQS                        0x016C 0x04B4 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_DATA07__UART3_RX                           0x016C 0x04B4 0x0840 0x3 0x1
-#define MX6SX_PAD_NAND_DATA07__UART3_TX                           0x016C 0x04B4 0x0000 0x3 0x0
+#define MX6SX_PAD_NAND_DATA07__UART3_DCE_TX                       0x016C 0x04B4 0x0000 0x3 0x0
+#define MX6SX_PAD_NAND_DATA07__UART3_DTE_RX                       0x016C 0x04B4 0x0840 0x3 0x1
 #define MX6SX_PAD_NAND_DATA07__PWM4_OUT                           0x016C 0x04B4 0x0000 0x4 0x0
 #define MX6SX_PAD_NAND_DATA07__GPIO4_IO_11                        0x016C 0x04B4 0x0000 0x5 0x0
 #define MX6SX_PAD_NAND_DATA07__WEIM_AD_7                          0x016C 0x04B4 0x0000 0x6 0x0
@@ -967,7 +983,8 @@
 #define MX6SX_PAD_QSPI1A_SS1_B__SIM_M_HADDR_12                    0x019C 0x04E4 0x0000 0x7 0x0
 #define MX6SX_PAD_QSPI1A_SS1_B__SDMA_DEBUG_PC_3                   0x019C 0x04E4 0x0000 0x9 0x0
 #define MX6SX_PAD_QSPI1B_DATA0__QSPI1_B_DATA_0                    0x01A0 0x04E8 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1B_DATA0__UART3_CTS_B                       0x01A0 0x04E8 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1B_DATA0__UART3_DCE_CTS                     0x01A0 0x04E8 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1B_DATA0__UART3_DTE_RTS                     0x01A0 0x04E8 0x083C 0x1 0x4
 #define MX6SX_PAD_QSPI1B_DATA0__ECSPI3_MOSI                       0x01A0 0x04E8 0x0738 0x2 0x1
 #define MX6SX_PAD_QSPI1B_DATA0__ESAI_RX_FS                        0x01A0 0x04E8 0x0778 0x3 0x2
 #define MX6SX_PAD_QSPI1B_DATA0__CSI1_DATA_22                      0x01A0 0x04E8 0x06F4 0x4 0x1
@@ -975,7 +992,8 @@
 #define MX6SX_PAD_QSPI1B_DATA0__WEIM_DATA_14                      0x01A0 0x04E8 0x0000 0x6 0x0
 #define MX6SX_PAD_QSPI1B_DATA0__SIM_M_HADDR_9                     0x01A0 0x04E8 0x0000 0x7 0x0
 #define MX6SX_PAD_QSPI1B_DATA1__QSPI1_B_DATA_1                    0x01A4 0x04EC 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1B_DATA1__UART3_RTS_B                       0x01A4 0x04EC 0x083C 0x1 0x5
+#define MX6SX_PAD_QSPI1B_DATA1__UART3_DCE_RTS                     0x01A4 0x04EC 0x083C 0x1 0x5
+#define MX6SX_PAD_QSPI1B_DATA1__UART3_DTE_CTS                     0x01A4 0x04EC 0x0000 0x1 0x0
 #define MX6SX_PAD_QSPI1B_DATA1__ECSPI3_MISO                       0x01A4 0x04EC 0x0734 0x2 0x1
 #define MX6SX_PAD_QSPI1B_DATA1__ESAI_RX_CLK                       0x01A4 0x04EC 0x0788 0x3 0x2
 #define MX6SX_PAD_QSPI1B_DATA1__CSI1_DATA_21                      0x01A4 0x04EC 0x06F0 0x4 0x1
@@ -1007,8 +1025,8 @@
 #define MX6SX_PAD_QSPI1B_DQS__WEIM_DATA_15                        0x01B0 0x04F8 0x0000 0x6 0x0
 #define MX6SX_PAD_QSPI1B_DQS__SIM_M_HADDR_15                      0x01B0 0x04F8 0x0000 0x7 0x0
 #define MX6SX_PAD_QSPI1B_SCLK__QSPI1_B_SCLK                       0x01B4 0x04FC 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1B_SCLK__UART3_RX                           0x01B4 0x04FC 0x0840 0x1 0x4
-#define MX6SX_PAD_QSPI1B_SCLK__UART3_TX                           0x01B4 0x04FC 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_SCLK__UART3_DCE_RX                       0x01B4 0x04FC 0x0840 0x1 0x4
+#define MX6SX_PAD_QSPI1B_SCLK__UART3_DTE_TX                       0x01B4 0x04FC 0x0000 0x0 0x0
 #define MX6SX_PAD_QSPI1B_SCLK__ECSPI3_SCLK                        0x01B4 0x04FC 0x0730 0x2 0x1
 #define MX6SX_PAD_QSPI1B_SCLK__ESAI_RX_HF_CLK                     0x01B4 0x04FC 0x0780 0x3 0x2
 #define MX6SX_PAD_QSPI1B_SCLK__CSI1_DATA_16                       0x01B4 0x04FC 0x06DC 0x4 0x1
@@ -1016,8 +1034,8 @@
 #define MX6SX_PAD_QSPI1B_SCLK__WEIM_DATA_8                        0x01B4 0x04FC 0x0000 0x6 0x0
 #define MX6SX_PAD_QSPI1B_SCLK__SIM_M_HADDR_11                     0x01B4 0x04FC 0x0000 0x7 0x0
 #define MX6SX_PAD_QSPI1B_SS0_B__QSPI1_B_SS0_B                     0x01B8 0x0500 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1B_SS0_B__UART3_RX                          0x01B8 0x0500 0x0840 0x1 0x5
-#define MX6SX_PAD_QSPI1B_SS0_B__UART3_TX                          0x01B8 0x0500 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1B_SS0_B__UART3_DCE_TX                      0x01B8 0x0500 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1B_SS0_B__UART3_DTE_RX                      0x01B8 0x0500 0x0840 0x1 0x5
 #define MX6SX_PAD_QSPI1B_SS0_B__ECSPI3_SS0                        0x01B8 0x0500 0x073C 0x2 0x1
 #define MX6SX_PAD_QSPI1B_SS0_B__ESAI_TX_HF_CLK                    0x01B8 0x0500 0x0784 0x3 0x3
 #define MX6SX_PAD_QSPI1B_SS0_B__CSI1_DATA_17                      0x01B8 0x0500 0x06E0 0x4 0x1
@@ -1224,8 +1242,8 @@
 #define MX6SX_PAD_SD1_DATA0__AUDMUX_AUD5_RXD                      0x0228 0x0570 0x065C 0x1 0x1
 #define MX6SX_PAD_SD1_DATA0__CAAM_WRAPPER_RNG_OSC_OBS             0x0228 0x0570 0x0000 0x2 0x0
 #define MX6SX_PAD_SD1_DATA0__GPT_CAPTURE1                         0x0228 0x0570 0x0000 0x3 0x0
-#define MX6SX_PAD_SD1_DATA0__UART2_RX                             0x0228 0x0570 0x0838 0x4 0x2
-#define MX6SX_PAD_SD1_DATA0__UART2_TX                             0x0228 0x0570 0x0000 0x4 0x0
+#define MX6SX_PAD_SD1_DATA0__UART2_DCE_RX                         0x0228 0x0570 0x0838 0x4 0x2
+#define MX6SX_PAD_SD1_DATA0__UART2_DTE_TX                         0x0228 0x0570 0x0000 0x4 0x0
 #define MX6SX_PAD_SD1_DATA0__GPIO6_IO_2                           0x0228 0x0570 0x0000 0x5 0x0
 #define MX6SX_PAD_SD1_DATA0__ENET1_1588_EVENT1_IN                 0x0228 0x0570 0x0000 0x6 0x0
 #define MX6SX_PAD_SD1_DATA0__CCM_OUT2                             0x0228 0x0570 0x0000 0x7 0x0
@@ -1235,8 +1253,8 @@
 #define MX6SX_PAD_SD1_DATA1__AUDMUX_AUD5_TXC                      0x022C 0x0574 0x066C 0x1 0x1
 #define MX6SX_PAD_SD1_DATA1__PWM4_OUT                             0x022C 0x0574 0x0000 0x2 0x0
 #define MX6SX_PAD_SD1_DATA1__GPT_CAPTURE2                         0x022C 0x0574 0x0000 0x3 0x0
-#define MX6SX_PAD_SD1_DATA1__UART2_RX                             0x022C 0x0574 0x0838 0x4 0x3
-#define MX6SX_PAD_SD1_DATA1__UART2_TX                             0x022C 0x0574 0x0000 0x4 0x0
+#define MX6SX_PAD_SD1_DATA1__UART2_DCE_TX                         0x022C 0x0574 0x0000 0x4 0x0
+#define MX6SX_PAD_SD1_DATA1__UART2_DTE_RX                         0x022C 0x0574 0x0838 0x4 0x3
 #define MX6SX_PAD_SD1_DATA1__GPIO6_IO_3                           0x022C 0x0574 0x0000 0x5 0x0
 #define MX6SX_PAD_SD1_DATA1__ENET1_1588_EVENT1_OUT                0x022C 0x0574 0x0000 0x6 0x0
 #define MX6SX_PAD_SD1_DATA1__CCM_CLKO2                            0x022C 0x0574 0x0000 0x7 0x0
@@ -1246,7 +1264,8 @@
 #define MX6SX_PAD_SD1_DATA2__AUDMUX_AUD5_TXFS                     0x0230 0x0578 0x0670 0x1 0x1
 #define MX6SX_PAD_SD1_DATA2__PWM3_OUT                             0x0230 0x0578 0x0000 0x2 0x0
 #define MX6SX_PAD_SD1_DATA2__GPT_COMPARE2                         0x0230 0x0578 0x0000 0x3 0x0
-#define MX6SX_PAD_SD1_DATA2__UART2_CTS_B                          0x0230 0x0578 0x0000 0x4 0x0
+#define MX6SX_PAD_SD1_DATA2__UART2_DCE_CTS                        0x0230 0x0578 0x0000 0x4 0x0
+#define MX6SX_PAD_SD1_DATA2__UART2_DTE_RTS                        0x0230 0x0578 0x0834 0x4 0x2
 #define MX6SX_PAD_SD1_DATA2__GPIO6_IO_4                           0x0230 0x0578 0x0000 0x5 0x0
 #define MX6SX_PAD_SD1_DATA2__ECSPI4_RDY                           0x0230 0x0578 0x0000 0x6 0x0
 #define MX6SX_PAD_SD1_DATA2__CCM_OUT0                             0x0230 0x0578 0x0000 0x7 0x0
@@ -1255,7 +1274,8 @@
 #define MX6SX_PAD_SD1_DATA3__AUDMUX_AUD5_TXD                      0x0234 0x057C 0x0660 0x1 0x1
 #define MX6SX_PAD_SD1_DATA3__AUDMUX_AUD5_RXD                      0x0234 0x057C 0x065C 0x2 0x2
 #define MX6SX_PAD_SD1_DATA3__GPT_COMPARE3                         0x0234 0x057C 0x0000 0x3 0x0
-#define MX6SX_PAD_SD1_DATA3__UART2_RTS_B                          0x0234 0x057C 0x0834 0x4 0x3
+#define MX6SX_PAD_SD1_DATA3__UART2_DCE_RTS                        0x0234 0x057C 0x0834 0x4 0x3
+#define MX6SX_PAD_SD1_DATA3__UART2_DTE_CTS                        0x0234 0x057C 0x0000 0x4 0x0
 #define MX6SX_PAD_SD1_DATA3__GPIO6_IO_5                           0x0234 0x057C 0x0000 0x5 0x0
 #define MX6SX_PAD_SD1_DATA3__ECSPI4_SS1                           0x0234 0x057C 0x0000 0x6 0x0
 #define MX6SX_PAD_SD1_DATA3__CCM_PMIC_RDY                         0x0234 0x057C 0x069C 0x7 0x2
@@ -1287,8 +1307,8 @@
 #define MX6SX_PAD_SD2_DATA0__I2C4_SDA                             0x0240 0x0588 0x07C4 0x4 0x3
 #define MX6SX_PAD_SD2_DATA0__GPIO6_IO_8                           0x0240 0x0588 0x0000 0x5 0x0
 #define MX6SX_PAD_SD2_DATA0__ECSPI4_SS3                           0x0240 0x0588 0x0000 0x6 0x0
-#define MX6SX_PAD_SD2_DATA0__UART4_RX                             0x0240 0x0588 0x0848 0x7 0x4
-#define MX6SX_PAD_SD2_DATA0__UART4_TX                             0x0240 0x0588 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_DATA0__UART4_DCE_RX                         0x0240 0x0588 0x0848 0x7 0x4
+#define MX6SX_PAD_SD2_DATA0__UART4_DTE_TX                         0x0240 0x0588 0x0000 0x7 0x0
 #define MX6SX_PAD_SD2_DATA0__VADC_CLAMP_CURRENT_0                 0x0240 0x0588 0x0000 0x8 0x0
 #define MX6SX_PAD_SD2_DATA0__MMDC_DEBUG_50                        0x0240 0x0588 0x0000 0x9 0x0
 #define MX6SX_PAD_SD2_DATA1__USDHC2_DATA1                         0x0244 0x058C 0x0000 0x0 0x0
@@ -1298,8 +1318,8 @@
 #define MX6SX_PAD_SD2_DATA1__I2C4_SCL                             0x0244 0x058C 0x07C0 0x4 0x3
 #define MX6SX_PAD_SD2_DATA1__GPIO6_IO_9                           0x0244 0x058C 0x0000 0x5 0x0
 #define MX6SX_PAD_SD2_DATA1__ECSPI4_SS2                           0x0244 0x058C 0x0000 0x6 0x0
-#define MX6SX_PAD_SD2_DATA1__UART4_RX                             0x0244 0x058C 0x0848 0x7 0x5
-#define MX6SX_PAD_SD2_DATA1__UART4_TX                             0x0244 0x058C 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_DATA1__UART4_DCE_TX                         0x0244 0x058C 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_DATA1__UART4_DTE_RX                         0x0244 0x058C 0x0848 0x7 0x5
 #define MX6SX_PAD_SD2_DATA1__VADC_CLAMP_CURRENT_1                 0x0244 0x058C 0x0000 0x8 0x0
 #define MX6SX_PAD_SD2_DATA1__MMDC_DEBUG_49                        0x0244 0x058C 0x0000 0x9 0x0
 #define MX6SX_PAD_SD2_DATA2__USDHC2_DATA2                         0x0248 0x0590 0x0000 0x0 0x0
@@ -1309,8 +1329,8 @@
 #define MX6SX_PAD_SD2_DATA2__SDMA_EXT_EVENT_0                     0x0248 0x0590 0x081C 0x4 0x2
 #define MX6SX_PAD_SD2_DATA2__GPIO6_IO_10                          0x0248 0x0590 0x0000 0x5 0x0
 #define MX6SX_PAD_SD2_DATA2__SPDIF_OUT                            0x0248 0x0590 0x0000 0x6 0x0
-#define MX6SX_PAD_SD2_DATA2__UART6_RX                             0x0248 0x0590 0x0858 0x7 0x4
-#define MX6SX_PAD_SD2_DATA2__UART6_TX                             0x0248 0x0590 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_DATA2__UART6_DCE_RX                         0x0248 0x0590 0x0858 0x7 0x4
+#define MX6SX_PAD_SD2_DATA2__UART6_DTE_TX                         0x0248 0x0590 0x0000 0x7 0x0
 #define MX6SX_PAD_SD2_DATA2__VADC_CLAMP_CURRENT_2                 0x0248 0x0590 0x0000 0x8 0x0
 #define MX6SX_PAD_SD2_DATA2__MMDC_DEBUG_32                        0x0248 0x0590 0x0000 0x9 0x0
 #define MX6SX_PAD_SD2_DATA3__USDHC2_DATA3                         0x024C 0x0594 0x0000 0x0 0x0
@@ -1320,12 +1340,13 @@
 #define MX6SX_PAD_SD2_DATA3__MLB_DATA                             0x024C 0x0594 0x07EC 0x4 0x2
 #define MX6SX_PAD_SD2_DATA3__GPIO6_IO_11                          0x024C 0x0594 0x0000 0x5 0x0
 #define MX6SX_PAD_SD2_DATA3__SPDIF_IN                             0x024C 0x0594 0x0824 0x6 0x4
-#define MX6SX_PAD_SD2_DATA3__UART6_RX                             0x024C 0x0594 0x0858 0x7 0x5
-#define MX6SX_PAD_SD2_DATA3__UART6_TX                             0x024C 0x0594 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_DATA3__UART6_DCE_TX                         0x024C 0x0594 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_DATA3__UART6_DTE_RX                         0x024C 0x0594 0x0858 0x7 0x5
 #define MX6SX_PAD_SD2_DATA3__VADC_CLAMP_CURRENT_3                 0x024C 0x0594 0x0000 0x8 0x0
 #define MX6SX_PAD_SD2_DATA3__MMDC_DEBUG_31                        0x024C 0x0594 0x0000 0x9 0x0
 #define MX6SX_PAD_SD3_CLK__USDHC3_CLK                             0x0250 0x0598 0x0000 0x0 0x0
-#define MX6SX_PAD_SD3_CLK__UART4_CTS_B                            0x0250 0x0598 0x0000 0x1 0x0
+#define MX6SX_PAD_SD3_CLK__UART4_DCE_CTS                          0x0250 0x0598 0x0000 0x1 0x0
+#define MX6SX_PAD_SD3_CLK__UART4_DTE_RTS                          0x0250 0x0598 0x0844 0x1 0x0
 #define MX6SX_PAD_SD3_CLK__ECSPI4_SCLK                            0x0250 0x0598 0x0740 0x2 0x0
 #define MX6SX_PAD_SD3_CLK__AUDMUX_AUD6_RXFS                       0x0250 0x0598 0x0680 0x3 0x0
 #define MX6SX_PAD_SD3_CLK__LCDIF2_VSYNC                           0x0250 0x0598 0x0000 0x4 0x0
@@ -1334,8 +1355,8 @@
 #define MX6SX_PAD_SD3_CLK__TPSMP_HDATA_29                         0x0250 0x0598 0x0000 0x7 0x0
 #define MX6SX_PAD_SD3_CLK__SDMA_DEBUG_EVENT_CHANNEL_5             0x0250 0x0598 0x0000 0x9 0x0
 #define MX6SX_PAD_SD3_CMD__USDHC3_CMD                             0x0254 0x059C 0x0000 0x0 0x0
-#define MX6SX_PAD_SD3_CMD__UART4_RX                               0x0254 0x059C 0x0848 0x1 0x0
-#define MX6SX_PAD_SD3_CMD__UART4_TX                               0x0254 0x059C 0x0000 0x1 0x0
+#define MX6SX_PAD_SD3_CMD__UART4_DCE_TX                           0x0254 0x059C 0x0000 0x1 0x0
+#define MX6SX_PAD_SD3_CMD__UART4_DTE_RX                           0x0254 0x059C 0x0848 0x1 0x0
 #define MX6SX_PAD_SD3_CMD__ECSPI4_MOSI                            0x0254 0x059C 0x0748 0x2 0x0
 #define MX6SX_PAD_SD3_CMD__AUDMUX_AUD6_RXC                        0x0254 0x059C 0x067C 0x3 0x0
 #define MX6SX_PAD_SD3_CMD__LCDIF2_HSYNC                           0x0254 0x059C 0x07E4 0x4 0x1
@@ -1364,7 +1385,8 @@
 #define MX6SX_PAD_SD3_DATA1__GPU_DEBUG_1                          0x025C 0x05A4 0x0000 0x8 0x0
 #define MX6SX_PAD_SD3_DATA1__SDMA_DEBUG_EVT_CHN_LINES_1           0x025C 0x05A4 0x0000 0x9 0x0
 #define MX6SX_PAD_SD3_DATA2__USDHC3_DATA2                         0x0260 0x05A8 0x0000 0x0 0x0
-#define MX6SX_PAD_SD3_DATA2__UART4_RTS_B                          0x0260 0x05A8 0x0844 0x1 0x1
+#define MX6SX_PAD_SD3_DATA2__UART4_DCE_RTS                        0x0260 0x05A8 0x0844 0x1 0x1
+#define MX6SX_PAD_SD3_DATA2__UART4_DTE_CTS                        0x0260 0x05A8 0x0000 0x1 0x0
 #define MX6SX_PAD_SD3_DATA2__ECSPI4_SS0                           0x0260 0x05A8 0x074C 0x2 0x0
 #define MX6SX_PAD_SD3_DATA2__AUDMUX_AUD6_TXFS                     0x0260 0x05A8 0x0688 0x3 0x0
 #define MX6SX_PAD_SD3_DATA2__LCDIF2_CLK                           0x0260 0x05A8 0x0000 0x4 0x0
@@ -1374,8 +1396,8 @@
 #define MX6SX_PAD_SD3_DATA2__GPU_DEBUG_2                          0x0260 0x05A8 0x0000 0x8 0x0
 #define MX6SX_PAD_SD3_DATA2__SDMA_DEBUG_EVENT_CHANNEL_2           0x0260 0x05A8 0x0000 0x9 0x0
 #define MX6SX_PAD_SD3_DATA3__USDHC3_DATA3                         0x0264 0x05AC 0x0000 0x0 0x0
-#define MX6SX_PAD_SD3_DATA3__UART4_RX                             0x0264 0x05AC 0x0848 0x1 0x1
-#define MX6SX_PAD_SD3_DATA3__UART4_TX                             0x0264 0x05AC 0x0000 0x1 0x0
+#define MX6SX_PAD_SD3_DATA3__UART4_DCE_RX                         0x0264 0x05AC 0x0848 0x1 0x1
+#define MX6SX_PAD_SD3_DATA3__UART4_DTE_TX                         0x0264 0x05AC 0x0000 0x1 0x0
 #define MX6SX_PAD_SD3_DATA3__ECSPI4_MISO                          0x0264 0x05AC 0x0744 0x2 0x0
 #define MX6SX_PAD_SD3_DATA3__AUDMUX_AUD6_TXD                      0x0264 0x05AC 0x0678 0x3 0x0
 #define MX6SX_PAD_SD3_DATA3__LCDIF2_ENABLE                        0x0264 0x05AC 0x0000 0x4 0x0
@@ -1387,8 +1409,8 @@
 #define MX6SX_PAD_SD3_DATA4__USDHC3_DATA4                         0x0268 0x05B0 0x0000 0x0 0x0
 #define MX6SX_PAD_SD3_DATA4__CAN2_RX                              0x0268 0x05B0 0x0690 0x1 0x0
 #define MX6SX_PAD_SD3_DATA4__CANFD_RX2                            0x0268 0x05B0 0x0698 0x2 0x0
-#define MX6SX_PAD_SD3_DATA4__UART3_RX                             0x0268 0x05B0 0x0840 0x3 0x2
-#define MX6SX_PAD_SD3_DATA4__UART3_TX                             0x0268 0x05B0 0x0000 0x3 0x0
+#define MX6SX_PAD_SD3_DATA4__UART3_DCE_RX                         0x0268 0x05B0 0x0840 0x3 0x2
+#define MX6SX_PAD_SD3_DATA4__UART3_DTE_TX                         0x0268 0x05B0 0x0000 0x3 0x0
 #define MX6SX_PAD_SD3_DATA4__LCDIF2_DATA_3                        0x0268 0x05B0 0x0000 0x4 0x0
 #define MX6SX_PAD_SD3_DATA4__GPIO7_IO_6                           0x0268 0x05B0 0x0000 0x5 0x0
 #define MX6SX_PAD_SD3_DATA4__ENET2_1588_EVENT0_IN                 0x0268 0x05B0 0x0000 0x6 0x0
@@ -1398,8 +1420,8 @@
 #define MX6SX_PAD_SD3_DATA5__USDHC3_DATA5                         0x026C 0x05B4 0x0000 0x0 0x0
 #define MX6SX_PAD_SD3_DATA5__CAN1_TX                              0x026C 0x05B4 0x0000 0x1 0x0
 #define MX6SX_PAD_SD3_DATA5__CANFD_TX1                            0x026C 0x05B4 0x0000 0x2 0x0
-#define MX6SX_PAD_SD3_DATA5__UART3_RX                             0x026C 0x05B4 0x0840 0x3 0x3
-#define MX6SX_PAD_SD3_DATA5__UART3_TX                             0x026C 0x05B4 0x0000 0x3 0x0
+#define MX6SX_PAD_SD3_DATA5__UART3_DCE_TX                         0x026C 0x05B4 0x0000 0x3 0x0
+#define MX6SX_PAD_SD3_DATA5__UART3_DTE_RX                         0x026C 0x05B4 0x0840 0x3 0x3
 #define MX6SX_PAD_SD3_DATA5__LCDIF2_DATA_2                        0x026C 0x05B4 0x0000 0x4 0x0
 #define MX6SX_PAD_SD3_DATA5__GPIO7_IO_7                           0x026C 0x05B4 0x0000 0x5 0x0
 #define MX6SX_PAD_SD3_DATA5__ENET2_1588_EVENT0_OUT                0x026C 0x05B4 0x0000 0x6 0x0
@@ -1409,7 +1431,8 @@
 #define MX6SX_PAD_SD3_DATA6__USDHC3_DATA6                         0x0270 0x05B8 0x0000 0x0 0x0
 #define MX6SX_PAD_SD3_DATA6__CAN2_TX                              0x0270 0x05B8 0x0000 0x1 0x0
 #define MX6SX_PAD_SD3_DATA6__CANFD_TX2                            0x0270 0x05B8 0x0000 0x2 0x0
-#define MX6SX_PAD_SD3_DATA6__UART3_RTS_B                          0x0270 0x05B8 0x083C 0x3 0x2
+#define MX6SX_PAD_SD3_DATA6__UART3_DCE_RTS                        0x0270 0x05B8 0x083C 0x3 0x2
+#define MX6SX_PAD_SD3_DATA6__UART3_DTE_CTS                        0x0270 0x05B8 0x0000 0x3 0x0
 #define MX6SX_PAD_SD3_DATA6__LCDIF2_DATA_4                        0x0270 0x05B8 0x0000 0x4 0x0
 #define MX6SX_PAD_SD3_DATA6__GPIO7_IO_8                           0x0270 0x05B8 0x0000 0x5 0x0
 #define MX6SX_PAD_SD3_DATA6__ENET1_1588_EVENT0_OUT                0x0270 0x05B8 0x0000 0x6 0x0
@@ -1419,7 +1442,8 @@
 #define MX6SX_PAD_SD3_DATA7__USDHC3_DATA7                         0x0274 0x05BC 0x0000 0x0 0x0
 #define MX6SX_PAD_SD3_DATA7__CAN1_RX                              0x0274 0x05BC 0x068C 0x1 0x0
 #define MX6SX_PAD_SD3_DATA7__CANFD_RX1                            0x0274 0x05BC 0x0694 0x2 0x0
-#define MX6SX_PAD_SD3_DATA7__UART3_CTS_B                          0x0274 0x05BC 0x0000 0x3 0x0
+#define MX6SX_PAD_SD3_DATA7__UART3_DCE_CTS                        0x0274 0x05BC 0x0000 0x3 0x0
+#define MX6SX_PAD_SD3_DATA7__UART3_DTE_RTS                        0x0274 0x05BC 0x083C 0x3 0x3
 #define MX6SX_PAD_SD3_DATA7__LCDIF2_DATA_5                        0x0274 0x05BC 0x0000 0x4 0x0
 #define MX6SX_PAD_SD3_DATA7__GPIO7_IO_9                           0x0274 0x05BC 0x0000 0x5 0x0
 #define MX6SX_PAD_SD3_DATA7__ENET1_1588_EVENT0_IN                 0x0274 0x05BC 0x0000 0x6 0x0
@@ -1488,8 +1512,8 @@
 #define MX6SX_PAD_SD4_DATA3__SDMA_DEBUG_MATCHED_DMBUS             0x028C 0x05D4 0x0000 0x9 0x0
 #define MX6SX_PAD_SD4_DATA4__USDHC4_DATA4                         0x0290 0x05D8 0x0000 0x0 0x0
 #define MX6SX_PAD_SD4_DATA4__RAWNAND_DATA09                       0x0290 0x05D8 0x0000 0x1 0x0
-#define MX6SX_PAD_SD4_DATA4__UART5_RX                             0x0290 0x05D8 0x0850 0x2 0x0
-#define MX6SX_PAD_SD4_DATA4__UART5_TX                             0x0290 0x05D8 0x0000 0x2 0x0
+#define MX6SX_PAD_SD4_DATA4__UART5_DCE_RX                         0x0290 0x05D8 0x0850 0x2 0x0
+#define MX6SX_PAD_SD4_DATA4__UART5_DTE_TX                         0x0290 0x05D8 0x0000 0x2 0x0
 #define MX6SX_PAD_SD4_DATA4__ECSPI3_SCLK                          0x0290 0x05D8 0x0730 0x3 0x0
 #define MX6SX_PAD_SD4_DATA4__LCDIF2_DATA_8                        0x0290 0x05D8 0x0000 0x4 0x0
 #define MX6SX_PAD_SD4_DATA4__GPIO6_IO_18                          0x0290 0x05D8 0x0000 0x5 0x0
@@ -1499,8 +1523,8 @@
 #define MX6SX_PAD_SD4_DATA4__SDMA_DEBUG_RTBUFFER_WRITE            0x0290 0x05D8 0x0000 0x9 0x0
 #define MX6SX_PAD_SD4_DATA5__USDHC4_DATA5                         0x0294 0x05DC 0x0000 0x0 0x0
 #define MX6SX_PAD_SD4_DATA5__RAWNAND_CE2_B                        0x0294 0x05DC 0x0000 0x1 0x0
-#define MX6SX_PAD_SD4_DATA5__UART5_RX                             0x0294 0x05DC 0x0850 0x2 0x1
-#define MX6SX_PAD_SD4_DATA5__UART5_TX                             0x0294 0x05DC 0x0000 0x2 0x0
+#define MX6SX_PAD_SD4_DATA5__UART5_DCE_TX                         0x0294 0x05DC 0x0000 0x2 0x0
+#define MX6SX_PAD_SD4_DATA5__UART5_DTE_RX                         0x0294 0x05DC 0x0850 0x2 0x1
 #define MX6SX_PAD_SD4_DATA5__ECSPI3_MOSI                          0x0294 0x05DC 0x0738 0x3 0x0
 #define MX6SX_PAD_SD4_DATA5__LCDIF2_DATA_7                        0x0294 0x05DC 0x0000 0x4 0x0
 #define MX6SX_PAD_SD4_DATA5__GPIO6_IO_19                          0x0294 0x05DC 0x0000 0x5 0x0
@@ -1510,7 +1534,8 @@
 #define MX6SX_PAD_SD4_DATA5__SDMA_DEBUG_EVENT_CHANNEL_0           0x0294 0x05DC 0x0000 0x9 0x0
 #define MX6SX_PAD_SD4_DATA6__USDHC4_DATA6                         0x0298 0x05E0 0x0000 0x0 0x0
 #define MX6SX_PAD_SD4_DATA6__RAWNAND_CE3_B                        0x0298 0x05E0 0x0000 0x1 0x0
-#define MX6SX_PAD_SD4_DATA6__UART5_RTS_B                          0x0298 0x05E0 0x084C 0x2 0x0
+#define MX6SX_PAD_SD4_DATA6__UART5_DCE_RTS                        0x0298 0x05E0 0x084C 0x2 0x0
+#define MX6SX_PAD_SD4_DATA6__UART5_DTE_CTS                        0x0298 0x05E0 0x0000 0x2 0x0
 #define MX6SX_PAD_SD4_DATA6__ECSPI3_MISO                          0x0298 0x05E0 0x0734 0x3 0x0
 #define MX6SX_PAD_SD4_DATA6__LCDIF2_DATA_6                        0x0298 0x05E0 0x0000 0x4 0x0
 #define MX6SX_PAD_SD4_DATA6__GPIO6_IO_20                          0x0298 0x05E0 0x0000 0x5 0x0
@@ -1520,7 +1545,8 @@
 #define MX6SX_PAD_SD4_DATA6__SDMA_DEBUG_EVENT_CHANNEL_1           0x0298 0x05E0 0x0000 0x9 0x0
 #define MX6SX_PAD_SD4_DATA7__USDHC4_DATA7                         0x029C 0x05E4 0x0000 0x0 0x0
 #define MX6SX_PAD_SD4_DATA7__RAWNAND_DATA08                       0x029C 0x05E4 0x0000 0x1 0x0
-#define MX6SX_PAD_SD4_DATA7__UART5_CTS_B                          0x029C 0x05E4 0x0000 0x2 0x0
+#define MX6SX_PAD_SD4_DATA7__UART5_DCE_CTS                        0x029C 0x05E4 0x0000 0x2 0x0
+#define MX6SX_PAD_SD4_DATA7__UART5_DTE_RTS                        0x029C 0x05E4 0x084C 0x2 0x1
 #define MX6SX_PAD_SD4_DATA7__ECSPI3_SS0                           0x029C 0x05E4 0x073C 0x3 0x0
 #define MX6SX_PAD_SD4_DATA7__LCDIF2_DATA_15                       0x029C 0x05E4 0x0000 0x4 0x0
 #define MX6SX_PAD_SD4_DATA7__GPIO6_IO_21                          0x029C 0x05E4 0x0000 0x5 0x0
@@ -1551,4 +1577,92 @@
 #define MX6SX_PAD_USB_H_STROBE__WDOG3_WDOG_RST_B_DEB              0x02A8 0x05F0 0x0000 0x4 0x0
 #define MX6SX_PAD_USB_H_STROBE__GPIO7_IO_11                       0x02A8 0x05F0 0x0000 0x5 0x0
 
+/* these are not supposed to be used any more and remove them after some time */
+#define MX6SX_PAD_GPIO1_IO04__UART1_RX		MX6SX_PAD_GPIO1_IO04__UART1_DTE_RX
+#define MX6SX_PAD_GPIO1_IO04__UART1_TX		MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX
+#define MX6SX_PAD_GPIO1_IO05__UART1_RX		MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX
+#define MX6SX_PAD_GPIO1_IO05__UART1_TX		MX6SX_PAD_GPIO1_IO05__UART1_DTE_TX
+#define MX6SX_PAD_GPIO1_IO06__UART2_RX		MX6SX_PAD_GPIO1_IO06__UART2_DTE_RX
+#define MX6SX_PAD_GPIO1_IO06__UART2_TX		MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX
+#define MX6SX_PAD_GPIO1_IO06__UART1_RTS_B	MX6SX_PAD_GPIO1_IO06__UART1_DCE_RTS
+#define MX6SX_PAD_GPIO1_IO07__UART2_RX		MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX
+#define MX6SX_PAD_GPIO1_IO07__UART2_TX		MX6SX_PAD_GPIO1_IO07__UART2_DTE_TX
+#define MX6SX_PAD_GPIO1_IO07__UART1_CTS_B	MX6SX_PAD_GPIO1_IO07__UART1_DCE_CTS
+#define MX6SX_PAD_GPIO1_IO08__UART2_RTS_B	MX6SX_PAD_GPIO1_IO08__UART2_DCE_RTS
+#define MX6SX_PAD_GPIO1_IO09__UART2_CTS_B	MX6SX_PAD_GPIO1_IO09__UART2_DCE_CTS
+#define MX6SX_PAD_CSI_DATA04__UART6_RX		MX6SX_PAD_CSI_DATA04__UART6_DCE_RX
+#define MX6SX_PAD_CSI_DATA04__UART6_TX		MX6SX_PAD_CSI_DATA04__UART6_DTE_TX
+#define MX6SX_PAD_CSI_DATA05__UART6_RX		MX6SX_PAD_CSI_DATA05__UART6_DTE_RX
+#define MX6SX_PAD_CSI_DATA05__UART6_TX		MX6SX_PAD_CSI_DATA05__UART6_DCE_TX
+#define MX6SX_PAD_CSI_DATA06__UART6_RTS_B	MX6SX_PAD_CSI_DATA06__UART6_DCE_RTS
+#define MX6SX_PAD_CSI_DATA07__UART6_CTS_B	MX6SX_PAD_CSI_DATA07__UART6_DCE_CTS
+#define MX6SX_PAD_CSI_HSYNC__UART4_RTS_B	MX6SX_PAD_CSI_HSYNC__UART4_DCE_RTS
+#define MX6SX_PAD_CSI_MCLK__UART4_RX		MX6SX_PAD_CSI_MCLK__UART4_DCE_RX
+#define MX6SX_PAD_CSI_MCLK__UART4_TX		MX6SX_PAD_CSI_MCLK__UART4_DTE_TX
+#define MX6SX_PAD_CSI_PIXCLK__UART4_RX		MX6SX_PAD_CSI_PIXCLK__UART4_DTE_RX
+#define MX6SX_PAD_CSI_PIXCLK__UART4_TX		MX6SX_PAD_CSI_PIXCLK__UART4_DCE_TX
+#define MX6SX_PAD_CSI_VSYNC__UART4_CTS_B	MX6SX_PAD_CSI_VSYNC__UART4_DCE_CTS
+#define MX6SX_PAD_ENET2_COL__UART1_RX		MX6SX_PAD_ENET2_COL__UART1_DCE_RX
+#define MX6SX_PAD_ENET2_COL__UART1_TX		MX6SX_PAD_ENET2_COL__UART1_DTE_TX
+#define MX6SX_PAD_ENET2_CRS__UART1_RX		MX6SX_PAD_ENET2_CRS__UART1_DTE_RX
+#define MX6SX_PAD_ENET2_CRS__UART1_TX		MX6SX_PAD_ENET2_CRS__UART1_DCE_TX
+#define MX6SX_PAD_ENET2_RX_CLK__UART1_RTS_B	MX6SX_PAD_ENET2_RX_CLK__UART1_DCE_RTS
+#define MX6SX_PAD_ENET2_TX_CLK__UART1_CTS_B	MX6SX_PAD_ENET2_TX_CLK__UART1_DCE_CTS
+#define MX6SX_PAD_KEY_COL0__UART6_RTS_B		MX6SX_PAD_KEY_COL0__UART6_DCE_RTS
+#define MX6SX_PAD_KEY_COL1__UART6_RX		MX6SX_PAD_KEY_COL1__UART6_DTE_RX
+#define MX6SX_PAD_KEY_COL1__UART6_TX		MX6SX_PAD_KEY_COL1__UART6_DCE_TX
+#define MX6SX_PAD_KEY_COL2__UART5_RTS_B		MX6SX_PAD_KEY_COL2__UART5_DCE_RTS
+#define MX6SX_PAD_KEY_COL3__UART5_RX		MX6SX_PAD_KEY_COL3__UART5_DTE_RX
+#define MX6SX_PAD_KEY_COL3__UART5_TX		MX6SX_PAD_KEY_COL3__UART5_DCE_TX
+#define MX6SX_PAD_KEY_ROW0__UART6_CTS_B		MX6SX_PAD_KEY_ROW0__UART6_DCE_CTS
+#define MX6SX_PAD_KEY_ROW1__UART6_RX		MX6SX_PAD_KEY_ROW1__UART6_DCE_RX
+#define MX6SX_PAD_KEY_ROW1__UART6_TX		MX6SX_PAD_KEY_ROW1__UART6_DTE_TX
+#define MX6SX_PAD_KEY_ROW2__UART5_CTS_B		MX6SX_PAD_KEY_ROW2__UART5_DCE_CTS
+#define MX6SX_PAD_KEY_ROW3__UART5_RX		MX6SX_PAD_KEY_ROW3__UART5_DCE_RX
+#define MX6SX_PAD_KEY_ROW3__UART5_TX		MX6SX_PAD_KEY_ROW3__UART5_DTE_TX
+#define MX6SX_PAD_NAND_DATA04__UART3_RTS_B	MX6SX_PAD_NAND_DATA04__UART3_DCE_RTS
+#define MX6SX_PAD_NAND_DATA05__UART3_CTS_B	MX6SX_PAD_NAND_DATA05__UART3_DCE_CTS
+#define MX6SX_PAD_NAND_DATA06__UART3_RX		MX6SX_PAD_NAND_DATA06__UART3_DCE_RX
+#define MX6SX_PAD_NAND_DATA06__UART3_TX		MX6SX_PAD_NAND_DATA06__UART3_DTE_TX
+#define MX6SX_PAD_NAND_DATA07__UART3_RX		MX6SX_PAD_NAND_DATA07__UART3_DTE_RX
+#define MX6SX_PAD_NAND_DATA07__UART3_TX		MX6SX_PAD_NAND_DATA07__UART3_DCE_TX
+#define MX6SX_PAD_QSPI1B_DATA0__UART3_CTS_B	MX6SX_PAD_QSPI1B_DATA0__UART3_DCE_CTS
+#define MX6SX_PAD_QSPI1B_DATA1__UART3_RTS_B	MX6SX_PAD_QSPI1B_DATA1__UART3_DCE_RTS
+#define MX6SX_PAD_QSPI1B_SCLK__UART3_RX		MX6SX_PAD_QSPI1B_SCLK__UART3_DCE_RX
+#define MX6SX_PAD_QSPI1B_SCLK__UART3_TX		MX6SX_PAD_QSPI1B_SCLK__UART3_DTE_TX
+#define MX6SX_PAD_QSPI1B_SS0_B__UART3_RX	MX6SX_PAD_QSPI1B_SS0_B__UART3_DTE_RX
+#define MX6SX_PAD_QSPI1B_SS0_B__UART3_TX	MX6SX_PAD_QSPI1B_SS0_B__UART3_DCE_TX
+#define MX6SX_PAD_SD1_DATA0__UART2_RX		MX6SX_PAD_SD1_DATA0__UART2_DCE_RX
+#define MX6SX_PAD_SD1_DATA0__UART2_TX		MX6SX_PAD_SD1_DATA0__UART2_DTE_TX
+#define MX6SX_PAD_SD1_DATA1__UART2_RX		MX6SX_PAD_SD1_DATA1__UART2_DTE_RX
+#define MX6SX_PAD_SD1_DATA1__UART2_TX		MX6SX_PAD_SD1_DATA1__UART2_DCE_TX
+#define MX6SX_PAD_SD1_DATA2__UART2_CTS_B	MX6SX_PAD_SD1_DATA2__UART2_DCE_CTS
+#define MX6SX_PAD_SD1_DATA3__UART2_RTS_B	MX6SX_PAD_SD1_DATA3__UART2_DCE_RTS
+#define MX6SX_PAD_SD2_DATA0__UART4_RX		MX6SX_PAD_SD2_DATA0__UART4_DCE_RX
+#define MX6SX_PAD_SD2_DATA0__UART4_TX		MX6SX_PAD_SD2_DATA0__UART4_DTE_TX
+#define MX6SX_PAD_SD2_DATA1__UART4_RX		MX6SX_PAD_SD2_DATA1__UART4_DTE_RX
+#define MX6SX_PAD_SD2_DATA1__UART4_TX		MX6SX_PAD_SD2_DATA1__UART4_DCE_TX
+#define MX6SX_PAD_SD2_DATA2__UART6_RX		MX6SX_PAD_SD2_DATA2__UART6_DCE_RX
+#define MX6SX_PAD_SD2_DATA2__UART6_TX		MX6SX_PAD_SD2_DATA2__UART6_DTE_TX
+#define MX6SX_PAD_SD2_DATA3__UART6_RX		MX6SX_PAD_SD2_DATA3__UART6_DTE_RX
+#define MX6SX_PAD_SD2_DATA3__UART6_TX		MX6SX_PAD_SD2_DATA3__UART6_DCE_TX
+#define MX6SX_PAD_SD3_CLK__UART4_CTS_B		MX6SX_PAD_SD3_CLK__UART4_DCE_CTS
+#define MX6SX_PAD_SD3_CMD__UART4_RX		MX6SX_PAD_SD3_CMD__UART4_DTE_RX
+#define MX6SX_PAD_SD3_CMD__UART4_TX		MX6SX_PAD_SD3_CMD__UART4_DCE_TX
+#define MX6SX_PAD_SD3_DATA2__UART4_RTS_B	MX6SX_PAD_SD3_DATA2__UART4_DCE_RTS
+#define MX6SX_PAD_SD3_DATA3__UART4_RX		MX6SX_PAD_SD3_DATA3__UART4_DCE_RX
+#define MX6SX_PAD_SD3_DATA3__UART4_TX		MX6SX_PAD_SD3_DATA3__UART4_DTE_TX
+#define MX6SX_PAD_SD3_DATA4__UART3_RX		MX6SX_PAD_SD3_DATA4__UART3_DCE_RX
+#define MX6SX_PAD_SD3_DATA4__UART3_TX		MX6SX_PAD_SD3_DATA4__UART3_DTE_TX
+#define MX6SX_PAD_SD3_DATA5__UART3_RX		MX6SX_PAD_SD3_DATA5__UART3_DTE_RX
+#define MX6SX_PAD_SD3_DATA5__UART3_TX		MX6SX_PAD_SD3_DATA5__UART3_DCE_TX
+#define MX6SX_PAD_SD3_DATA6__UART3_RTS_B	MX6SX_PAD_SD3_DATA6__UART3_DCE_RTS
+#define MX6SX_PAD_SD3_DATA7__UART3_CTS_B	MX6SX_PAD_SD3_DATA7__UART3_DCE_CTS
+#define MX6SX_PAD_SD4_DATA4__UART5_RX		MX6SX_PAD_SD4_DATA4__UART5_DCE_RX
+#define MX6SX_PAD_SD4_DATA4__UART5_TX		MX6SX_PAD_SD4_DATA4__UART5_DTE_TX
+#define MX6SX_PAD_SD4_DATA5__UART5_RX		MX6SX_PAD_SD4_DATA5__UART5_DTE_RX
+#define MX6SX_PAD_SD4_DATA5__UART5_TX		MX6SX_PAD_SD4_DATA5__UART5_DCE_TX
+#define MX6SX_PAD_SD4_DATA6__UART5_RTS_B	MX6SX_PAD_SD4_DATA6__UART5_DCE_RTS
+#define MX6SX_PAD_SD4_DATA7__UART5_CTS_B	MX6SX_PAD_SD4_DATA7__UART5_DCE_CTS
+
 #endif /* __DTS_IMX6SX_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts
index 315044c..8259244 100644
--- a/arch/arm/boot/dts/imx6sx-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts
@@ -229,8 +229,8 @@ MX6SX_PAD_CSI_PIXCLK__GPIO1_IO_24 0x17059
 
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
-			MX6SX_PAD_GPIO1_IO04__UART1_TX		0x1b0b1
-			MX6SX_PAD_GPIO1_IO05__UART1_RX		0x1b0b1
+			MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX		0x1b0b1
+			MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX		0x1b0b1
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi
index f6972de..3e5fb72 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dtsi
+++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi
@@ -564,17 +564,17 @@ MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK	0x130b0
 
 		pinctrl_uart1: uart1grp {
 			fsl,pins = <
-				MX6SX_PAD_GPIO1_IO04__UART1_TX		0x1b0b1
-				MX6SX_PAD_GPIO1_IO05__UART1_RX		0x1b0b1
+				MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX	0x1b0b1
+				MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX	0x1b0b1
 			>;
 		};
 
 		pinctrl_uart5: uart5grp {
 			fsl,pins = <
-				MX6SX_PAD_KEY_ROW3__UART5_RX		0x1b0b1
-				MX6SX_PAD_KEY_COL3__UART5_TX		0x1b0b1
-				MX6SX_PAD_KEY_ROW2__UART5_CTS_B		0x1b0b1
-				MX6SX_PAD_KEY_COL2__UART5_RTS_B		0x1b0b1
+				MX6SX_PAD_KEY_ROW3__UART5_DCE_RX	0x1b0b1
+				MX6SX_PAD_KEY_COL3__UART5_DCE_TX	0x1b0b1
+				MX6SX_PAD_KEY_ROW2__UART5_DCE_CTS	0x1b0b1
+				MX6SX_PAD_KEY_COL2__UART5_DCE_RTS	0x1b0b1
 			>;
 		};
 
diff --git a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts
index 28563f2..6b728b0 100644
--- a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts
+++ b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts
@@ -352,6 +352,12 @@ MX6SX_PAD_NAND_CLE__I2C3_SCL		0x4001b8b1
 		>;
 	};
 
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6SX_PAD_NAND_DATA02__GPIO4_IO_6	0x10b0
+		>;
+	};
+
 	pinctrl_pwm1: pwm1grp-1 {
 		fsl,pins = <
 			/* blue LED */
@@ -384,15 +390,15 @@ MX6SX_PAD_KEY_ROW1__GPIO2_IO_16		0x70e0
 
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
-			MX6SX_PAD_GPIO1_IO04__UART1_TX		0x1b0b1
-			MX6SX_PAD_GPIO1_IO05__UART1_RX		0x1b0b1
+			MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX	0x1b0b1
+			MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX	0x1b0b1
 		>;
 	};
 
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
-			MX6SX_PAD_GPIO1_IO06__UART2_TX		0x1b0b1
-			MX6SX_PAD_GPIO1_IO07__UART2_RX		0x1b0b1
+			MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX	0x1b0b1
+			MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX	0x1b0b1
 		>;
 	};
 
@@ -490,6 +496,14 @@ MX6SX_PAD_SD4_DATA7__USDHC4_DATA7	0x170f9
 	};
 };
 
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+	reset-gpio-active-high;
+	status = "okay";
+};
+
 &pwm1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
index 25d4aa9..ee64565 100644
--- a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
+++ b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
@@ -235,28 +235,28 @@ pinctrl_i2c4: i2c4grp {
 
 	pinctrl_uart1: uart1grp {
 		fsl,pins =
-			<MX6SX_PAD_GPIO1_IO04__UART1_TX		0x1b0b1>,
-			<MX6SX_PAD_GPIO1_IO05__UART1_RX		0x1b0b1>;
+			<MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX	0x1b0b1>,
+			<MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX	0x1b0b1>;
 	};
 
 	pinctrl_uart2: uart2grp {
 		fsl,pins =
-			<MX6SX_PAD_GPIO1_IO06__UART2_TX		0x1b0b1>,
-			<MX6SX_PAD_GPIO1_IO07__UART2_RX		0x1b0b1>;
+			<MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX	0x1b0b1>,
+			<MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX	0x1b0b1>;
 	};
 
 	pinctrl_uart3: uart3grp {
 		fsl,pins =
-			<MX6SX_PAD_SD3_DATA4__UART3_RX          0x13059>,
-			<MX6SX_PAD_SD3_DATA5__UART3_TX          0x13059>,
-			<MX6SX_PAD_SD3_DATA6__UART3_RTS_B       0x13059>,
-			<MX6SX_PAD_SD3_DATA7__UART3_CTS_B       0x13059>;
+			<MX6SX_PAD_SD3_DATA4__UART3_DCE_RX	0x13059>,
+			<MX6SX_PAD_SD3_DATA5__UART3_DCE_TX	0x13059>,
+			<MX6SX_PAD_SD3_DATA6__UART3_DCE_RTS	0x13059>,
+			<MX6SX_PAD_SD3_DATA7__UART3_DCE_CTS	0x13059>;
 	};
 
 	pinctrl_uart5: uart5grp {
 		fsl,pins =
-			<MX6SX_PAD_SD4_DATA4__UART5_RX		0x1b0b1>,
-			<MX6SX_PAD_SD4_DATA5__UART5_TX		0x1b0b1>;
+			<MX6SX_PAD_SD4_DATA4__UART5_DCE_RX	0x1b0b1>,
+			<MX6SX_PAD_SD4_DATA5__UART5_DCE_TX	0x1b0b1>;
 	};
 
 	pinctrl_uart6: uart6grp {
@@ -265,10 +265,10 @@ pinctrl_uart6: uart6grp {
 			<MX6SX_PAD_CSI_DATA01__UART6_DSR_B	0x1b0b1>,
 			<MX6SX_PAD_CSI_DATA02__UART6_DTR_B	0x1b0b1>,
 			<MX6SX_PAD_CSI_DATA03__UART6_DCD_B	0x1b0b1>,
-			<MX6SX_PAD_CSI_DATA04__UART6_RX		0x1b0b1>,
-			<MX6SX_PAD_CSI_DATA05__UART6_TX		0x1b0b1>,
-			<MX6SX_PAD_CSI_DATA06__UART6_RTS_B	0x1b0b1>,
-			<MX6SX_PAD_CSI_DATA07__UART6_CTS_B	0x1b0b1>;
+			<MX6SX_PAD_CSI_DATA04__UART6_DCE_RX	0x1b0b1>,
+			<MX6SX_PAD_CSI_DATA05__UART6_DCE_TX	0x1b0b1>,
+			<MX6SX_PAD_CSI_DATA06__UART6_DCE_RTS	0x1b0b1>,
+			<MX6SX_PAD_CSI_DATA07__UART6_DCE_CTS	0x1b0b1>;
 	};
 
 	pinctrl_otg1_reg: otg1grp {
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 59bad60..d6f8317 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -87,6 +87,8 @@ cpu0: cpu@0 {
 				      "pll1_sw", "pll1_sys";
 			arm-supply = <&reg_arm>;
 			soc-supply = <&reg_soc>;
+			nvmem-cells = <&cpu_speed_grade>;
+			nvmem-cell-names = "speed_grade";
 		};
 	};
 
@@ -235,7 +237,7 @@ gpmi: gpmi-nand@1806000{
 			status = "disabled";
 		};
 
-		aips1: aips-bus@2000000 {
+		aips1: bus@2000000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -466,7 +468,7 @@ flexcan2: can@2094000 {
 				status = "disabled";
 			};
 
-			gpt: gpt@2098000 {
+			gpt: timer@2098000 {
 				compatible = "fsl,imx6sx-gpt", "fsl,imx6dl-gpt";
 				reg = <0x02098000 0x4000>;
 				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
@@ -559,7 +561,7 @@ gpio7: gpio@20b4000 {
 				gpio-ranges = <&iomuxc 0 148 10>, <&iomuxc 10 169 2>;
 			};
 
-			kpp: kpp@20b8000 {
+			kpp: keypad@20b8000 {
 				compatible = "fsl,imx6sx-kpp", "fsl,imx21-kpp";
 				reg = <0x020b8000 0x4000>;
 				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
@@ -567,14 +569,14 @@ kpp: kpp@20b8000 {
 				status = "disabled";
 			};
 
-			wdog1: wdog@20bc000 {
+			wdog1: watchdog@20bc000 {
 				compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
 				reg = <0x020bc000 0x4000>;
 				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SX_CLK_IPG>;
 			};
 
-			wdog2: wdog@20c0000 {
+			wdog2: watchdog@20c0000 {
 				compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
 				reg = <0x020c0000 0x4000>;
 				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
@@ -582,7 +584,7 @@ wdog2: wdog@20c0000 {
 				status = "disabled";
 			};
 
-			clks: ccm@20c4000 {
+			clks: clock-controller@20c4000 {
 				compatible = "fsl,imx6sx-ccm";
 				reg = <0x020c4000 0x4000>;
 				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
@@ -806,7 +808,7 @@ pd_pci: power-domain@3 {
 				};
 			};
 
-			iomuxc: iomuxc@20e0000 {
+			iomuxc: pinctrl@20e0000 {
 				compatible = "fsl,imx6sx-iomuxc";
 				reg = <0x020e0000 0x4000>;
 			};
@@ -830,14 +832,14 @@ sdma: sdma@20ec000 {
 			};
 		};
 
-		aips2: aips-bus@2100000 {
+		aips2: bus@2100000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0x02100000 0x100000>;
 			ranges;
 
-			crypto: caam@2100000 {
+			crypto: crypto@2100000 {
 				compatible = "fsl,sec-v4.0";
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -850,13 +852,13 @@ crypto: caam@2100000 {
 					 <&clks IMX6SX_CLK_EIM_SLOW>;
 				clock-names = "mem", "aclk", "ipg", "emi_slow";
 
-				sec_jr0: jr0@1000 {
+				sec_jr0: jr@1000 {
 					compatible = "fsl,sec-v4.0-job-ring";
 					reg = <0x1000 0x1000>;
 					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 				};
 
-				sec_jr1: jr1@2000 {
+				sec_jr1: jr@2000 {
 					compatible = "fsl,sec-v4.0-job-ring";
 					reg = <0x2000 0x1000>;
 					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
@@ -1051,13 +1053,17 @@ weim: weim@21b8000 {
 				status = "disabled";
 			};
 
-			ocotp: ocotp@21bc000 {
+			ocotp: ocotp-ctrl@21bc000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "fsl,imx6sx-ocotp", "syscon";
 				reg = <0x021bc000 0x4000>;
 				clocks = <&clks IMX6SX_CLK_OCOTP>;
 
+				cpu_speed_grade: speed-grade@10 {
+					reg = <0x10 4>;
+				};
+
 				tempmon_calib: calib@38 {
 					reg = <0x38 4>;
 				};
@@ -1188,7 +1194,7 @@ i2c4: i2c@21f8000 {
 			};
 		};
 
-		aips3: aips-bus@2200000 {
+		aips3: bus@2200000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -1289,7 +1295,7 @@ adc2: adc@2284000 {
 				status = "disabled";
 			};
 
-			wdog3: wdog@2288000 {
+			wdog3: watchdog@2288000 {
 				compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
 				reg = <0x02288000 0x4000>;
 				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
index 3749fdd..5d3805b 100644
--- a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
+++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
@@ -25,7 +25,7 @@ lcd_backlight: backlight {
 	};
 
 	panel {
-		compatible = "auo,g101evn010", "simple-panel";
+		compatible = "auo,g101evn010";
 		power-supply = <&ldo4_ext>;
 		backlight = <&lcd_backlight>;
 
diff --git a/arch/arm/boot/dts/imx6ul-pico-dwarf.dts b/arch/arm/boot/dts/imx6ul-pico-dwarf.dts
new file mode 100644
index 0000000..162dc25
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-pico-dwarf.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2015 Technexion Ltd.
+//
+// Author: Wig Cheng  <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+/dts-v1/;
+
+#include "imx6ul-pico.dtsi"
+/ {
+	model = "TechNexion PICO-IMX6UL and DWARF baseboard";
+	compatible = "technexion,imx6ul-pico-dwarf", "fsl,imx6ul";
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx6ul-sgtl5000";
+		audio-cpu = <&sai1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+	};
+
+	sys_mclk: clock-sys-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+};
+
+&i2c2 {
+	clock_frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	sgtl5000: audio-codec@a {
+		reg = <0x0a>;
+		compatible = "fsl,sgtl5000";
+		clocks = <&sys_mclk>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	pressure-sensor@60 {
+		compatible = "fsl,mpl3115";
+		reg = <0x60>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-pico.dtsi b/arch/arm/boot/dts/imx6ul-pico.dtsi
index de9f8318..df1da98 100644
--- a/arch/arm/boot/dts/imx6ul-pico.dtsi
+++ b/arch/arm/boot/dts/imx6ul-pico.dtsi
@@ -20,7 +20,7 @@ chosen {
 		stdout-path = &uart6;
 	};
 
-	backlight {
+	backlight: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&pwm3 0 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -72,6 +72,17 @@ reg_brcm: regulator-brcm {
 		regulator-max-microvolt = <3300000>;
 		startup-delay-us = <200000>;
 	};
+
+	panel {
+		compatible = "vxt,vl050-8048nt-c01";
+		backlight = <&backlight>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
 };
 
 &can1 {
@@ -154,31 +165,11 @@ vref_reg: vrefddr {
 &lcdif {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>;
-	display = <&display0>;
 	status = "okay";
 
-	display0: display0 {
-		bits-per-pixel = <32>;
-		bus-width = <24>;
-
-		display-timings {
-			native-mode = <&timing0>;
-
-			timing0: timing0 {
-				clock-frequency = <33200000>;
-				hactive = <800>;
-				vactive = <480>;
-				hfront-porch = <210>;
-				hback-porch = <46>;
-				hsync-len = <1>;
-				vback-porch = <22>;
-				vfront-porch = <23>;
-				vsync-len = <1>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
+	port {
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index d9fdca1..2ccf67c 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -204,7 +204,7 @@ gpmi: gpmi-nand@1806000 {
 			status = "disabled";
 		};
 
-		aips1: aips-bus@2000000 {
+		aips1: bus@2000000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -430,7 +430,7 @@ can2: flexcan@2094000 {
 				status = "disabled";
 			};
 
-			gpt1: gpt@2098000 {
+			gpt1: timer@2098000 {
 				compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
 				reg = <0x02098000 0x4000>;
 				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
@@ -523,7 +523,7 @@ fec2: ethernet@20b4000 {
 				status = "disabled";
 			};
 
-			kpp: kpp@20b8000 {
+			kpp: keypad@20b8000 {
 				compatible = "fsl,imx6ul-kpp", "fsl,imx6q-kpp", "fsl,imx21-kpp";
 				reg = <0x020b8000 0x4000>;
 				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
@@ -531,14 +531,14 @@ kpp: kpp@20b8000 {
 				status = "disabled";
 			};
 
-			wdog1: wdog@20bc000 {
+			wdog1: watchdog@20bc000 {
 				compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
 				reg = <0x020bc000 0x4000>;
 				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6UL_CLK_WDOG1>;
 			};
 
-			wdog2: wdog@20c0000 {
+			wdog2: watchdog@20c0000 {
 				compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
 				reg = <0x020c0000 0x4000>;
 				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
@@ -546,7 +546,7 @@ wdog2: wdog@20c0000 {
 				status = "disabled";
 			};
 
-			clks: ccm@20c4000 {
+			clks: clock-controller@20c4000 {
 				compatible = "fsl,imx6ul-ccm";
 				reg = <0x020c4000 0x4000>;
 				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
@@ -693,7 +693,7 @@ gpc: gpc@20dc000 {
 				interrupt-parent = <&intc>;
 			};
 
-			iomuxc: iomuxc@20e0000 {
+			iomuxc: pinctrl@20e0000 {
 				compatible = "fsl,imx6ul-iomuxc";
 				reg = <0x020e0000 0x4000>;
 			};
@@ -704,7 +704,7 @@ gpr: iomuxc-gpr@20e4000 {
 				reg = <0x020e4000 0x4000>;
 			};
 
-			gpt2: gpt@20e8000 {
+			gpt2: timer@20e8000 {
 				compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
 				reg = <0x020e8000 0x4000>;
 				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
@@ -771,14 +771,14 @@ pwm8: pwm@20fc000 {
 			};
 		};
 
-		aips2: aips-bus@2100000 {
+		aips2: bus@2100000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0x02100000 0x100000>;
 			ranges;
 
-			crypto: caam@2140000 {
+			crypto: crypto@2140000 {
 				compatible = "fsl,imx6ul-caam", "fsl,sec-v4.0";
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -789,19 +789,19 @@ crypto: caam@2140000 {
 					 <&clks IMX6UL_CLK_CAAM_MEM>;
 				clock-names = "ipg", "aclk", "mem";
 
-				sec_jr0: jr0@1000 {
+				sec_jr0: jr@1000 {
 					compatible = "fsl,sec-v4.0-job-ring";
 					reg = <0x1000 0x1000>;
 					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 				};
 
-				sec_jr1: jr1@2000 {
+				sec_jr1: jr@2000 {
 					compatible = "fsl,sec-v4.0-job-ring";
 					reg = <0x2000 0x1000>;
 					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 				};
 
-				sec_jr2: jr2@3000 {
+				sec_jr2: jr@3000 {
 					compatible = "fsl,sec-v4.0-job-ring";
 					reg = <0x3000 0x1000>;
 					interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
@@ -1007,7 +1007,7 @@ qspi: spi@21e0000 {
 				status = "disabled";
 			};
 
-			wdog3: wdog@21e4000 {
+			wdog3: watchdog@21e4000 {
 				compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
 				reg = <0x021e4000 0x4000>;
 				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi
index b7e67d12..fcde7f7 100644
--- a/arch/arm/boot/dts/imx6ull.dtsi
+++ b/arch/arm/boot/dts/imx6ull.dtsi
@@ -51,7 +51,7 @@ &usdhc2 {
 
 / {
 	soc {
-		aips3: aips-bus@2200000 {
+		aips3: bus@2200000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm/boot/dts/imx7-colibri-aster.dtsi b/arch/arm/boot/dts/imx7-colibri-aster.dtsi
new file mode 100644
index 0000000..9fa701b
--- /dev/null
+++ b/arch/arm/boot/dts/imx7-colibri-aster.dtsi
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2017-2020 Toradex AG
+ *
+ */
+
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiokeys>;
+
+		power {
+			label = "Wake-Up";
+			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	panel: panel {
+		compatible = "edt,et057090dhu";
+		backlight = <&bl>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lcdif_out>;
+			};
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh_reg>;
+		regulator-name = "VCC_USB[1-4]";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 7 GPIO_ACTIVE_LOW>;
+		vin-supply = <&reg_5v0>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+};
+
+/*
+ * ADC2 is not available on the Aster board and
+ * conflicts with AD7879 resistive touchscreen.
+ */
+&adc2 {
+	status = "disabled";
+};
+
+&bl {
+	brightness-levels = <0 4 8 16 32 64 128 255>;
+	default-brightness-level = <6>;
+	power-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	/* Microchip/Atmel maxtouch controller */
+	touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiotouch>;
+		reg = <0x4a>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;	/* SODIMM 107 */
+		reset-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;	/* SODIMM 106 */
+	};
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc: m41t0m6@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl_gpiotouch: touchgpios {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA15__GPIO2_IO15        0x74
+			MX7D_PAD_EPDC_BDR0__GPIO2_IO28          0x14
+		>;
+	};
+};
+
+&lcdif {
+	status = "okay";
+
+	port {
+		lcdif_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbotg1 {
+	status = "okay";
+};
+
+&usdhc1 {
+	keep-power-in-suspend;
+	no-1-8-v;
+	wakeup-source;
+	vmmc-supply = <&reg_3v3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
index 6aa123c..9760137 100644
--- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
@@ -1,46 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
- * Copyright 2016 Toradex AG
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright 2016-2020 Toradex
  */
 
 / {
+	aliases {
+		rtc0 = &rtc;
+		rtc1 = &snvs_rtc;
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index 04717cf..e18e89d 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
- * Copyright 2016 Toradex AG
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright 2016-2020 Toradex
  */
 
 / {
@@ -130,6 +93,184 @@ &flexcan2 {
 	status = "disabled";
 };
 
+&gpio1 {
+	gpio-line-names = "SODIMM_43",
+			  "SODIMM_45",
+			  "SODIMM_135",
+			  "SODIMM_22",
+			  "",
+			  "",
+			  "SODIMM_37",
+			  "SODIMM_29",
+			  "SODIMM_59",
+			  "SODIMM_28",
+			  "SODIMM_30",
+			  "SODIMM_67",
+			  "",
+			  "",
+			  "SODIMM_188",
+			  "SODIMM_178";
+};
+
+&gpio2 {
+	gpio-line-names = "SODIMM_111",
+			  "SODIMM_113",
+			  "SODIMM_115",
+			  "SODIMM_117",
+			  "SODIMM_119",
+			  "SODIMM_121",
+			  "SODIMM_123",
+			  "SODIMM_125",
+			  "SODIMM_91",
+			  "SODIMM_89",
+			  "SODIMM_105",
+			  "SODIMM_152",
+			  "SODIMM_150",
+			  "SODIMM_95",
+			  "SODIMM_126",
+			  "SODIMM_107",
+			  "SODIMM_114",
+			  "SODIMM_116",
+			  "SODIMM_118",
+			  "SODIMM_120",
+			  "SODIMM_122",
+			  "SODIMM_124",
+			  "SODIMM_127",
+			  "SODIMM_130",
+			  "SODIMM_132",
+			  "SODIMM_134",
+			  "SODIMM_133",
+			  "SODIMM_104",
+			  "SODIMM_106",
+			  "SODIMM_110",
+			  "SODIMM_112",
+			  "SODIMM_128";
+};
+
+&gpio3 {
+	gpio-line-names = "SODIMM_56",
+			  "SODIMM_44",
+			  "SODIMM_68",
+			  "SODIMM_82",
+			  "SODIMM_93",
+			  "SODIMM_76",
+			  "SODIMM_70",
+			  "SODIMM_60",
+			  "SODIMM_58",
+			  "SODIMM_78",
+			  "SODIMM_72",
+			  "SODIMM_80",
+			  "SODIMM_46",
+			  "SODIMM_62",
+			  "SODIMM_48",
+			  "SODIMM_74",
+			  "SODIMM_50",
+			  "SODIMM_52",
+			  "SODIMM_54",
+			  "SODIMM_66",
+			  "SODIMM_64",
+			  "SODIMM_57",
+			  "SODIMM_61",
+			  "SODIMM_136",
+			  "SODIMM_138",
+			  "SODIMM_140",
+			  "SODIMM_142",
+			  "SODIMM_144",
+			  "SODIMM_146";
+};
+
+&gpio4 {
+	gpio-line-names = "SODIMM_35",
+			  "SODIMM_33",
+			  "SODIMM_38",
+			  "SODIMM_36",
+			  "SODIMM_21",
+			  "SODIMM_19",
+			  "SODIMM_131",
+			  "SODIMM_129",
+			  "SODIMM_90",
+			  "SODIMM_92",
+			  "SODIMM_88",
+			  "SODIMM_86",
+			  "SODIMM_81",
+			  "SODIMM_94",
+			  "SODIMM_96",
+			  "SODIMM_75",
+			  "SODIMM_101",
+			  "SODIMM_103",
+			  "SODIMM_79",
+			  "SODIMM_97",
+			  "SODIMM_67",
+			  "SODIMM_59",
+			  "SODIMM_85",
+			  "SODIMM_65";
+};
+
+&gpio5 {
+	gpio-line-names = "SODIMM_69",
+			  "SODIMM_71",
+			  "SODIMM_73",
+			  "SODIMM_47",
+			  "SODIMM_190",
+			  "SODIMM_192",
+			  "SODIMM_49",
+			  "SODIMM_51",
+			  "SODIMM_53",
+			  "",
+			  "",
+			  "SODIMM_98",
+			  "SODIMM_184",
+			  "SODIMM_186",
+			  "SODIMM_23",
+			  "SODIMM_31",
+			  "SODIMM_100",
+			  "SODIMM_102";
+};
+
+&gpio6 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_169",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_77",
+			  "SODIMM_24",
+			  "",
+			  "SODIMM_25",
+			  "SODIMM_27",
+			  "SODIMM_32",
+			  "SODIMM_34";
+};
+
+&gpio7 {
+	gpio-line-names = "",
+			  "",
+			  "SODIMM_63",
+			  "SODIMM_55",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_196",
+			  "SODIMM_194",
+			  "",
+			  "SODIMM_99",
+			  "",
+			  "",
+			  "SODIMM_137";
+};
+
 &gpmi {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpmi_nand>;
@@ -345,7 +486,7 @@ &usdhc3 {
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 &pinctrl_gpio4
-		     &pinctrl_gpio7>;
+		     &pinctrl_gpio7 &pinctrl_usbc_det>;
 
 	pinctrl_gpio1: gpio1-grp {
 		fsl,pins = <
@@ -356,7 +497,6 @@ MX7D_PAD_LCD_RESET__GPIO3_IO4		0x14 /* SODIMM 93 */
 			MX7D_PAD_EPDC_DATA13__GPIO2_IO13	0x14 /* SODIMM 95 */
 			MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11	0x14 /* SODIMM 99 */
 			MX7D_PAD_EPDC_DATA10__GPIO2_IO10	0x74 /* SODIMM 105 */
-			MX7D_PAD_EPDC_DATA15__GPIO2_IO15	0x74 /* SODIMM 107 */
 			MX7D_PAD_EPDC_DATA00__GPIO2_IO0		0x14 /* SODIMM 111 */
 			MX7D_PAD_EPDC_DATA01__GPIO2_IO1		0x14 /* SODIMM 113 */
 			MX7D_PAD_EPDC_DATA02__GPIO2_IO2		0x14 /* SODIMM 115 */
@@ -373,7 +513,6 @@ MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17	0x14 /* SODIMM 24 */
 			MX7D_PAD_SD2_DATA2__GPIO5_IO16		0x14 /* SODIMM 100 */
 			MX7D_PAD_SD2_DATA3__GPIO5_IO17		0x14 /* SODIMM 102 */
 			MX7D_PAD_EPDC_GDSP__GPIO2_IO27		0x14 /* SODIMM 104 */
-			MX7D_PAD_EPDC_BDR0__GPIO2_IO28		0x74 /* SODIMM 106 */
 			MX7D_PAD_EPDC_BDR1__GPIO2_IO29		0x14 /* SODIMM 110 */
 			MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30	0x14 /* SODIMM 112 */
 			MX7D_PAD_EPDC_SDCLK__GPIO2_IO16		0x14 /* SODIMM 114 */
@@ -450,7 +589,6 @@ MX7D_PAD_SD1_RESET_B__GPIO5_IO2		0X14 /* SODIMM 73 */
 
 	pinctrl_enet1: enet1grp {
 		fsl,pins = <
-			MX7D_PAD_ENET1_CRS__GPIO7_IO14			0x14
 			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x73
 			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x73
 			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x73
@@ -648,6 +786,12 @@ MX7D_PAD_UART3_RX_DATA__UART3_DTE_TX 0x79
 		>;
 	};
 
+	pinctrl_usbc_det: gpio-usbc-det {
+		fsl,pins = <
+			MX7D_PAD_ENET1_CRS__GPIO7_IO14	0x14
+		>;
+	};
+
 	pinctrl_usbh_reg: gpio-usbh-vbus {
 		fsl,pins = <
 			MX7D_PAD_UART3_CTS_B__GPIO4_IO7	0x14 /* SODIMM 129 USBH PEN */
diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
index 7646284..89267cd 100644
--- a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
+++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
@@ -85,12 +85,12 @@ &i2c2 {
 
 	pmic: pmic@8 {
 		compatible = "fsl,pfuze3000";
-		reg = <0x08>;
+		reg = <0x8>;
 
 		regulators {
 			sw1a_reg: sw1a {
 				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1475000>;
+				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
 				regulator-always-on;
 				regulator-ramp-delay = <6250>;
diff --git a/arch/arm/boot/dts/imx7d-colibri-aster.dts b/arch/arm/boot/dts/imx7d-colibri-aster.dts
new file mode 100644
index 0000000..f3f0537
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-colibri-aster.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2017-2020 Toradex AG
+ *
+ */
+
+/dts-v1/;
+#include "imx7d-colibri.dtsi"
+#include "imx7-colibri-aster.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7D on Aster Carrier Board";
+	compatible = "toradex,colibri-imx7d-aster", "toradex,colibri-imx7d",
+		     "fsl,imx7d";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usbh_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc-aster.dts b/arch/arm/boot/dts/imx7d-colibri-emmc-aster.dts
new file mode 100644
index 0000000..2048027
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-colibri-emmc-aster.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2017-2020 Toradex AG
+ *
+ */
+
+/dts-v1/;
+#include "imx7d-colibri-emmc.dtsi"
+#include "imx7-colibri-aster.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7D 1GB (eMMC) on Aster Carrier Board";
+	compatible = "toradex,colibri-imx7d-emmc-aster",
+		     "toradex,colibri-imx7d-emmc", "fsl,imx7d";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usbh_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi b/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi
index 898f4b8..af39e53 100644
--- a/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi
+++ b/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi
@@ -13,6 +13,32 @@ memory@80000000 {
 	};
 };
 
+&gpio6 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_169",
+			  "SODIMM_157",
+			  "",
+			  "SODIMM_163",
+			  "SODIMM_77",
+			  "SODIMM_24",
+			  "",
+			  "SODIMM_25",
+			  "SODIMM_27",
+			  "SODIMM_32",
+			  "SODIMM_34";
+};
+
 &usbotg2 {
 	dr_mode = "host";
 };
diff --git a/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts b/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts
index 136e11a..87b132bcd 100644
--- a/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
- * Copyright 2016 Toradex AG
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright 2016-2020 Toradex
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/imx7d-colibri.dtsi b/arch/arm/boot/dts/imx7d-colibri.dtsi
index e2e327f..c59d72e 100644
--- a/arch/arm/boot/dts/imx7d-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7d-colibri.dtsi
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
- * Copyright 2016 Toradex AG
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright 2016-2020 Toradex
  */
 
 #include "imx7d.dtsi"
diff --git a/arch/arm/boot/dts/imx7d-pico-dwarf.dts b/arch/arm/boot/dts/imx7d-pico-dwarf.dts
new file mode 100644
index 0000000..5162fe2
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-pico-dwarf.dts
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2015 Technexion Ltd.
+//
+// Author: Wig Cheng  <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+/dts-v1/;
+
+#include "imx7d-pico.dtsi"
+/ {
+	model = "TechNexion PICO-IMX7D and DWARF baseboard";
+	compatible = "technexion,imx7d-pico-dwarf", "fsl,imx7d";
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx7d-sgtl5000";
+		audio-cpu = <&sai1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+	};
+
+	sys_mclk: clock-sys-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+};
+
+&i2c1 {
+	clock_frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	sgtl5000: audio-codec@a {
+		reg = <0x0a>;
+		compatible = "fsl,sgtl5000";
+		clocks = <&sys_mclk>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	pressure-sensor@60 {
+		compatible = "fsl,mpl3115";
+		reg = <0x60>;
+	};
+};
+
+&i2c4 {
+	clock_frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pca9554: io-expander@25 {
+		compatible = "nxp,pca9554";
+		gpio-controller;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+		reg = <0x25>;
+	};
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreen>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&pca9554 4 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
+};
+
+&iomuxc {
+	pinctrl_touchscreen: touchscreengrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA13__GPIO2_IO13	0x14
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx7d-pico-nymph.dts b/arch/arm/boot/dts/imx7d-pico-nymph.dts
new file mode 100644
index 0000000..104a852
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-pico-nymph.dts
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2015 Technexion Ltd.
+//
+// Author: Wig Cheng  <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+/dts-v1/;
+
+#include "imx7d-pico.dtsi"
+/ {
+	model = "TechNexion PICO-IMX7 and NYMPH baseboard";
+	compatible = "technexion,imx7d-pico-nymph", "fsl,imx7d";
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led {
+			label = "gpio-led";
+			gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx7d-sgtl5000";
+		audio-cpu = <&sai1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+	};
+
+	sys_mclk: clock-sys-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+};
+
+&i2c1 {
+	clock_frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	sgtl5000: audio-codec@a {
+		reg = <0x0a>;
+		compatible = "fsl,sgtl5000";
+		clocks = <&sys_mclk>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	adc@52 {
+		compatible = "ti,adc081c";
+		reg = <0x52>;
+		vref-supply = <&reg_2p5v>;
+	};
+};
+
+&i2c2 {
+	clock_frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	rtc@68 {
+		compatible = "dallas,ds1337";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA13__GPIO2_IO13	0x14
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx7s-colibri-aster.dts b/arch/arm/boot/dts/imx7s-colibri-aster.dts
new file mode 100644
index 0000000..fca4e0a
--- /dev/null
+++ b/arch/arm/boot/dts/imx7s-colibri-aster.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2017-2020 Toradex AG
+ *
+ */
+
+/dts-v1/;
+#include "imx7s-colibri.dtsi"
+#include "imx7-colibri-aster.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7S on Aster Carrier Board";
+	compatible = "toradex,colibri-imx7s-aster", "toradex,colibri-imx7s",
+		     "fsl,imx7s";
+};
diff --git a/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts b/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts
index bd2a49c..aa70d3f 100644
--- a/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
- * Copyright 2016 Toradex AG
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright 2016-2020 Toradex
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/imx7s-colibri.dtsi b/arch/arm/boot/dts/imx7s-colibri.dtsi
index 6d16e32..94de220 100644
--- a/arch/arm/boot/dts/imx7s-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7s-colibri.dtsi
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
- * Copyright 2016 Toradex AG
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright 2016-2020 Toradex
  */
 
 #include "imx7s.dtsi"
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index 568d7a9..76e3ffb 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -315,7 +315,7 @@ intc: interrupt-controller@31001000 {
 			      <0x31006000 0x2000>;
 		};
 
-		aips1: aips-bus@30000000 {
+		aips1: bus@30000000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -406,14 +406,14 @@ gpio7: gpio@30260000 {
 				gpio-ranges = <&iomuxc 0 139 16>;
 			};
 
-			wdog1: wdog@30280000 {
+			wdog1: watchdog@30280000 {
 				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
 				reg = <0x30280000 0x10000>;
 				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX7D_WDOG1_ROOT_CLK>;
 			};
 
-			wdog2: wdog@30290000 {
+			wdog2: watchdog@30290000 {
 				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
 				reg = <0x30290000 0x10000>;
 				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
@@ -421,7 +421,7 @@ wdog2: wdog@30290000 {
 				status = "disabled";
 			};
 
-			wdog3: wdog@302a0000 {
+			wdog3: watchdog@302a0000 {
 				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
 				reg = <0x302a0000 0x10000>;
 				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
@@ -429,7 +429,7 @@ wdog3: wdog@302a0000 {
 				status = "disabled";
 			};
 
-			wdog4: wdog@302b0000 {
+			wdog4: watchdog@302b0000 {
 				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
 				reg = <0x302b0000 0x10000>;
 				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
@@ -443,7 +443,7 @@ iomuxc_lpsr: iomuxc-lpsr@302c0000 {
 				fsl,input-sel = <&iomuxc>;
 			};
 
-			gpt1: gpt@302d0000 {
+			gpt1: timer@302d0000 {
 				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
 				reg = <0x302d0000 0x10000>;
 				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
@@ -452,7 +452,7 @@ gpt1: gpt@302d0000 {
 				clock-names = "ipg", "per";
 			};
 
-			gpt2: gpt@302e0000 {
+			gpt2: timer@302e0000 {
 				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
 				reg = <0x302e0000 0x10000>;
 				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
@@ -462,7 +462,7 @@ gpt2: gpt@302e0000 {
 				status = "disabled";
 			};
 
-			gpt3: gpt@302f0000 {
+			gpt3: timer@302f0000 {
 				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
 				reg = <0x302f0000 0x10000>;
 				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
@@ -472,7 +472,7 @@ gpt3: gpt@302f0000 {
 				status = "disabled";
 			};
 
-			gpt4: gpt@30300000 {
+			gpt4: timer@30300000 {
 				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
 				reg = <0x30300000 0x10000>;
 				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
@@ -482,7 +482,7 @@ gpt4: gpt@30300000 {
 				status = "disabled";
 			};
 
-			kpp: kpp@30320000 {
+			kpp: keypad@30320000 {
 				compatible = "fsl,imx7d-kpp", "fsl,imx21-kpp";
 				reg = <0x30320000 0x10000>;
 				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
@@ -490,7 +490,7 @@ kpp: kpp@30320000 {
 				status = "disabled";
 			};
 
-			iomuxc: iomuxc@30330000 {
+			iomuxc: pinctrl@30330000 {
 				compatible = "fsl,imx7d-iomuxc";
 				reg = <0x30330000 0x10000>;
 			};
@@ -606,13 +606,15 @@ snvs_pwrkey: snvs-powerkey {
 					compatible = "fsl,sec-v4.0-pwrkey";
 					regmap = <&snvs>;
 					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX7D_SNVS_CLK>;
+					clock-names = "snvs-pwrkey";
 					linux,keycode = <KEY_POWER>;
 					wakeup-source;
 					status = "disabled";
 				};
 			};
 
-			clks: ccm@30380000 {
+			clks: clock-controller@30380000 {
 				compatible = "fsl,imx7d-ccm";
 				reg = <0x30380000 0x10000>;
 				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
@@ -663,7 +665,7 @@ pgc_hsic_phy: power-domain@2 {
 			};
 		};
 
-		aips2: aips-bus@30400000 {
+		aips2: bus@30400000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -803,7 +805,7 @@ mipi_vc0_to_csi_mux: endpoint {
 			};
 		};
 
-		aips3: aips-bus@30800000 {
+		aips3: bus@30800000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -932,7 +934,7 @@ sai3: sai@308c0000 {
 				};
 			};
 
-			crypto: caam@30900000 {
+			crypto: crypto@30900000 {
 				compatible = "fsl,sec-v4.0";
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -943,19 +945,19 @@ crypto: caam@30900000 {
 					 <&clks IMX7D_AHB_CHANNEL_ROOT_CLK>;
 				clock-names = "ipg", "aclk";
 
-				sec_jr0: jr0@1000 {
+				sec_jr0: jr@1000 {
 					compatible = "fsl,sec-v4.0-job-ring";
 					reg = <0x1000 0x1000>;
 					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 				};
 
-				sec_jr1: jr1@2000 {
+				sec_jr1: jr@2000 {
 					compatible = "fsl,sec-v4.0-job-ring";
 					reg = <0x2000 0x1000>;
 					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 				};
 
-				sec_jr2: jr1@3000 {
+				sec_jr2: jr@3000 {
 					compatible = "fsl,sec-v4.0-job-ring";
 					reg = <0x3000 0x1000>;
 					interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/imx7ulp-evk.dts b/arch/arm/boot/dts/imx7ulp-evk.dts
index a863a2b..eff51e1 100644
--- a/arch/arm/boot/dts/imx7ulp-evk.dts
+++ b/arch/arm/boot/dts/imx7ulp-evk.dts
@@ -72,7 +72,7 @@ &usbotg1 {
 	srp-disable;
 	hnp-disable;
 	adp-disable;
-	over-current-active-low;
+	disable-over-current;
 	status = "okay";
 };
 
@@ -110,7 +110,6 @@ IMX7ULP_PAD_PTC0__PTC0		0x20000
 	pinctrl_usbotg1_id: otg1idgrp {
 		fsl,pins = <
 			IMX7ULP_PAD_PTC13__USB0_ID	0x10003
-			IMX7ULP_PAD_PTC16__USB1_OC2	0x10003
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi
index ab91c98..f7c4878 100644
--- a/arch/arm/boot/dts/imx7ulp.dtsi
+++ b/arch/arm/boot/dts/imx7ulp.dtsi
@@ -132,13 +132,13 @@ crypto: crypto@40240000 {
 				 <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>;
 			clock-names = "aclk", "ipg";
 
-			sec_jr0: jr0@1000 {
+			sec_jr0: jr@1000 {
 				compatible = "fsl,sec-v4.0-job-ring";
 				reg = <0x1000 0x1000>;
 				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			sec_jr1: jr1@2000 {
+			sec_jr1: jr@2000 {
 				compatible = "fsl,sec-v4.0-job-ring";
 				reg = <0x2000 0x1000>;
 				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts
index 94d2ff9..198d661 100644
--- a/arch/arm/boot/dts/integratorap.dts
+++ b/arch/arm/boot/dts/integratorap.dts
@@ -9,7 +9,6 @@
 / {
 	model = "ARM Integrator/AP";
 	compatible = "arm,integrator-ap";
-	dma-ranges = <0x80000000 0x0 0x80000000>;
 
 	cpus {
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index 51e1305..2093b38 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -148,7 +148,7 @@ syscfg_pctl_a: syscfg@10005000 {
 		reg = <0 0x10005000 0 0x1000>;
 	};
 
-	scpsys: scpsys@10006000 {
+	scpsys: power-controller@10006000 {
 		compatible = "mediatek,mt2701-scpsys", "syscon";
 		#power-domain-cells = <1>;
 		reg = <0 0x10006000 0 0x1000>;
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index a79f0b6..f76b4a3 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -268,7 +268,7 @@ syscfg_pctl_a: syscfg@10005000 {
 		reg = <0 0x10005000 0 0x1000>;
 	};
 
-	scpsys: scpsys@10006000 {
+	scpsys: power-controller@10006000 {
 		compatible = "mediatek,mt7623-scpsys",
 			     "mediatek,mt2701-scpsys",
 			     "syscon";
diff --git a/arch/arm/boot/dts/mt7629.dtsi b/arch/arm/boot/dts/mt7629.dtsi
index 867b881..5cbb3d24 100644
--- a/arch/arm/boot/dts/mt7629.dtsi
+++ b/arch/arm/boot/dts/mt7629.dtsi
@@ -90,7 +90,7 @@ pericfg: syscon@10002000 {
 			#clock-cells = <1>;
 		};
 
-		scpsys: scpsys@10006000 {
+		scpsys: power-controller@10006000 {
 			compatible = "mediatek,mt7629-scpsys",
 				     "mediatek,mt7622-scpsys";
 			#power-domain-cells = <1>;
@@ -241,6 +241,20 @@ uart2: serial@11004000 {
 			status = "disabled";
 		};
 
+		pwm: pwm@11006000 {
+			compatible = "mediatek,mt7629-pwm";
+			reg = <0x11006000 0x1000>;
+			#pwm-cells = <2>;
+			clocks = <&topckgen CLK_TOP_PWM_SEL>,
+				 <&pericfg CLK_PERI_PWM_PD>,
+				 <&pericfg CLK_PERI_PWM1_PD>;
+			clock-names = "top", "main", "pwm1";
+			assigned-clocks = <&topckgen CLK_TOP_PWM_SEL>;
+			assigned-clock-parents =
+					<&topckgen CLK_TOP_UNIVPLL2_D4>;
+			status = "disabled";
+		};
+
 		i2c: i2c@11007000 {
 			compatible = "mediatek,mt7629-i2c",
 				     "mediatek,mt2712-i2c";
diff --git a/arch/arm/boot/dts/omap4-l4.dtsi b/arch/arm/boot/dts/omap4-l4.dtsi
index 459fd70..ef59e4e 100644
--- a/arch/arm/boot/dts/omap4-l4.dtsi
+++ b/arch/arm/boot/dts/omap4-l4.dtsi
@@ -1529,6 +1529,7 @@ timer9: timer@0 {
 			};
 		};
 
+		/* Unused DSS L4 access, see L3 instead */
 		target-module@40000 {			/* 0x48040000, ap 13 0a.0 */
 			compatible = "ti,sysc";
 			status = "disabled";
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 9a87440..763bdea 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -108,7 +108,6 @@ mpu {
 
 		dsp {
 			compatible = "ti,omap3-c64";
-			ti,hwmods = "dsp";
 		};
 
 		iva {
@@ -415,87 +414,213 @@ target-module@56000000 {
 			 */
 		};
 
-		dss: dss@58000000 {
-			compatible = "ti,omap4-dss";
-			reg = <0x58000000 0x80>;
-			status = "disabled";
-			ti,hwmods = "dss_core";
-			clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>;
-			clock-names = "fck";
+		/*
+		 * DSS is only using l3 mapping without l4 as noted in the TRM
+		 * "10.1.3 DSS Register Manual" for omap4460.
+		 */
+		target-module@58000000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x58000000 4>,
+			      <0x58000014 4>;
+			reg-names = "rev", "syss";
+			ti,syss-mask = <1>;
+			clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 0>,
+				 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 9>,
+				 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>,
+				 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 11>;
+			clock-names = "fck", "hdmi_clk", "sys_clk", "tv_clk";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges;
+			ranges = <0 0x58000000 0x1000000>;
 
-			dispc@58001000 {
-				compatible = "ti,omap4-dispc";
-				reg = <0x58001000 0x1000>;
-				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-				ti,hwmods = "dss_dispc";
+			dss: dss@0 {
+				compatible = "ti,omap4-dss";
+				reg = <0 0x80>;
+				status = "disabled";
 				clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>;
 				clock-names = "fck";
-			};
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x1000000>;
 
-			rfbi: encoder@58002000  {
-				compatible = "ti,omap4-rfbi";
-				reg = <0x58002000 0x1000>;
-				status = "disabled";
-				ti,hwmods = "dss_rfbi";
-				clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, <&l3_div_ck>;
-				clock-names = "fck", "ick";
-			};
+				target-module@1000 {
+					compatible = "ti,sysc-omap2", "ti,sysc";
+					reg = <0x1000 0x4>,
+					      <0x1010 0x4>,
+					      <0x1014 0x4>;
+					reg-names = "rev", "sysc", "syss";
+					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-midle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+							 SYSC_OMAP2_ENAWAKEUP |
+							 SYSC_OMAP2_SOFTRESET |
+							 SYSC_OMAP2_AUTOIDLE)>;
+					ti,syss-mask = <1>;
+					clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>,
+						 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
+					clock-names = "fck", "sys_clk";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x1000 0x1000>;
 
-			venc: encoder@58003000 {
-				compatible = "ti,omap4-venc";
-				reg = <0x58003000 0x1000>;
-				status = "disabled";
-				ti,hwmods = "dss_venc";
-				clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 11>;
-				clock-names = "fck";
-			};
+					dispc@0 {
+						compatible = "ti,omap4-dispc";
+						reg = <0 0x1000>;
+						interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+						clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>;
+						clock-names = "fck";
+					};
+				};
 
-			dsi1: encoder@58004000 {
-				compatible = "ti,omap4-dsi";
-				reg = <0x58004000 0x200>,
-				      <0x58004200 0x40>,
-				      <0x58004300 0x20>;
-				reg-names = "proto", "phy", "pll";
-				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-				ti,hwmods = "dss_dsi1";
-				clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>,
-					 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
-				clock-names = "fck", "sys_clk";
-			};
+				target-module@2000 {
+					compatible = "ti,sysc-omap2", "ti,sysc";
+					reg = <0x2000 0x4>,
+					      <0x2010 0x4>,
+					      <0x2014 0x4>;
+					reg-names = "rev", "sysc", "syss";
+					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+							 SYSC_OMAP2_AUTOIDLE)>;
+					ti,syss-mask = <1>;
+					clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>,
+						 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
+					clock-names = "fck", "sys_clk";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x2000 0x1000>;
 
-			dsi2: encoder@58005000 {
-				compatible = "ti,omap4-dsi";
-				reg = <0x58005000 0x200>,
-				      <0x58005200 0x40>,
-				      <0x58005300 0x20>;
-				reg-names = "proto", "phy", "pll";
-				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-				ti,hwmods = "dss_dsi2";
-				clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>,
-					 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
-				clock-names = "fck", "sys_clk";
-			};
+					rfbi: encoder@0  {
+						reg = <0 0x1000>;
+						status = "disabled";
+						clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, <&l3_div_ck>;
+						clock-names = "fck", "ick";
+					};
+				};
 
-			hdmi: encoder@58006000 {
-				compatible = "ti,omap4-hdmi";
-				reg = <0x58006000 0x200>,
-				      <0x58006200 0x100>,
-				      <0x58006300 0x100>,
-				      <0x58006400 0x1000>;
-				reg-names = "wp", "pll", "phy", "core";
-				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-				ti,hwmods = "dss_hdmi";
-				clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 9>,
-					 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
-				clock-names = "fck", "sys_clk";
-				dmas = <&sdma 76>;
-				dma-names = "audio_tx";
+				target-module@3000 {
+					compatible = "ti,sysc-omap2", "ti,sysc";
+					reg = <0x3000 0x4>;
+					reg-names = "rev";
+					clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
+					clock-names = "sys_clk";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x3000 0x1000>;
+
+					venc: encoder@0 {
+						compatible = "ti,omap4-venc";
+						reg = <0 0x1000>;
+						status = "disabled";
+						clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 11>;
+						clock-names = "fck";
+					};
+				};
+
+				target-module@4000 {
+					compatible = "ti,sysc-omap2", "ti,sysc";
+					reg = <0x4000 0x4>,
+					      <0x4010 0x4>,
+					      <0x4014 0x4>;
+					reg-names = "rev", "sysc", "syss";
+					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+							 SYSC_OMAP2_ENAWAKEUP |
+							 SYSC_OMAP2_SOFTRESET |
+							 SYSC_OMAP2_AUTOIDLE)>;
+					ti,syss-mask = <1>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x4000 0x1000>;
+
+					dsi1: encoder@0 {
+						compatible = "ti,omap4-dsi";
+						reg = <0 0x200>,
+						      <0x200 0x40>,
+						      <0x300 0x20>;
+						reg-names = "proto", "phy", "pll";
+						interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+						status = "disabled";
+						clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>,
+							 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
+						clock-names = "fck", "sys_clk";
+					};
+				};
+
+				target-module@5000 {
+					compatible = "ti,sysc-omap2", "ti,sysc";
+					reg = <0x5000 0x4>,
+					      <0x5010 0x4>,
+					      <0x5014 0x4>;
+					reg-names = "rev", "sysc", "syss";
+					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+							 SYSC_OMAP2_ENAWAKEUP |
+							 SYSC_OMAP2_SOFTRESET |
+							 SYSC_OMAP2_AUTOIDLE)>;
+					ti,syss-mask = <1>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x5000 0x1000>;
+
+					dsi2: encoder@0 {
+						compatible = "ti,omap4-dsi";
+						reg = <0 0x200>,
+						      <0x200 0x40>,
+						      <0x300 0x20>;
+						reg-names = "proto", "phy", "pll";
+						interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+						status = "disabled";
+						clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>,
+						         <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
+						clock-names = "fck", "sys_clk";
+					};
+				};
+
+				target-module@6000 {
+					compatible = "ti,sysc-omap4", "ti,sysc";
+					reg = <0x6000 0x4>,
+					      <0x6010 0x4>;
+					reg-names = "rev", "sysc";
+					/*
+					 * Has SYSC_IDLE_SMART and SYSC_IDLE_SMART_WKUP
+					 * but HDMI audio will fail with them.
+					 */
+					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>;
+					ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET)>;
+					clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 9>,
+						 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>;
+					clock-names = "fck", "dss_clk";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x6000 0x2000>;
+
+					hdmi: encoder@0 {
+					compatible = "ti,omap4-hdmi";
+						reg = <0 0x200>,
+						      <0x200 0x100>,
+						      <0x300 0x100>,
+						      <0x400 0x1000>;
+						reg-names = "wp", "pll", "phy", "core";
+						interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+						status = "disabled";
+						clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 9>,
+						         <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
+						clock-names = "fck", "sys_clk";
+						dmas = <&sdma 76>;
+						dma-names = "audio_tx";
+					};
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/omap5-l4-abe.dtsi b/arch/arm/boot/dts/omap5-l4-abe.dtsi
index 4ec7909d..bafd6ad 100644
--- a/arch/arm/boot/dts/omap5-l4-abe.dtsi
+++ b/arch/arm/boot/dts/omap5-l4-abe.dtsi
@@ -426,8 +426,20 @@ target-module@c0000 {			/* 0x401c0000, ap 30 1e.0 */
 		};
 
 		target-module@f1000 {			/* 0x401f1000, ap 32 20.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xf1000 0x4>,
+			      <0xf1010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+			clocks = <&abe_clkctrl OMAP5_AESS_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0xf1000 0x1000>,
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index a7562d3..2ac7f02 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -293,78 +293,185 @@ target-module@56000000 {
 			 */
 		};
 
-		dss: dss@58000000 {
-			compatible = "ti,omap5-dss";
-			reg = <0x58000000 0x80>;
-			status = "disabled";
-			ti,hwmods = "dss_core";
-			clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
-			clock-names = "fck";
+		target-module@58000000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x58000000 4>,
+			      <0x58000014 4>;
+			reg-names = "rev", "syss";
+			ti,syss-mask = <1>;
+			clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 0>,
+				 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 9>,
+				 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>,
+				 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 11>;
+			clock-names = "fck", "hdmi_clk", "sys_clk", "tv_clk";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges;
+			ranges = <0 0x58000000 0x1000000>;
 
-			dispc@58001000 {
-				compatible = "ti,omap5-dispc";
-				reg = <0x58001000 0x1000>;
-				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-				ti,hwmods = "dss_dispc";
+			dss: dss@0 {
+				compatible = "ti,omap5-dss";
+				reg = <0 0x80>;
+				status = "disabled";
 				clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
 				clock-names = "fck";
-			};
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x1000000>;
 
-			rfbi: encoder@58002000  {
-				compatible = "ti,omap5-rfbi";
-				reg = <0x58002000 0x100>;
-				status = "disabled";
-				ti,hwmods = "dss_rfbi";
-				clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>, <&l3_iclk_div>;
-				clock-names = "fck", "ick";
-			};
+				target-module@1000 {
+					compatible = "ti,sysc-omap2", "ti,sysc";
+					reg = <0x1000 0x4>,
+					      <0x1010 0x4>,
+					      <0x1014 0x4>;
+					reg-names = "rev", "sysc", "syss";
+					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-midle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+							 SYSC_OMAP2_ENAWAKEUP |
+							 SYSC_OMAP2_SOFTRESET |
+							 SYSC_OMAP2_AUTOIDLE)>;
+					ti,syss-mask = <1>;
+					clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
+					clock-names = "fck";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x1000 0x1000>;
 
-			dsi1: encoder@58004000 {
-				compatible = "ti,omap5-dsi";
-				reg = <0x58004000 0x200>,
-				      <0x58004200 0x40>,
-				      <0x58004300 0x40>;
-				reg-names = "proto", "phy", "pll";
-				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-				ti,hwmods = "dss_dsi1";
-				clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>,
-					 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>;
-				clock-names = "fck", "sys_clk";
-			};
+					dispc@0 {
+						compatible = "ti,omap5-dispc";
+						reg = <0 0x1000>;
+						interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+						clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
+						clock-names = "fck";
+					};
+				};
 
-			dsi2: encoder@58005000 {
-				compatible = "ti,omap5-dsi";
-				reg = <0x58009000 0x200>,
-				      <0x58009200 0x40>,
-				      <0x58009300 0x40>;
-				reg-names = "proto", "phy", "pll";
-				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-				ti,hwmods = "dss_dsi2";
-				clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>,
-					 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>;
-				clock-names = "fck", "sys_clk";
-			};
+				target-module@2000 {
+					compatible = "ti,sysc-omap2", "ti,sysc";
+					reg = <0x2000 0x4>,
+					      <0x2010 0x4>,
+					      <0x2014 0x4>;
+					reg-names = "rev", "sysc", "syss";
+					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+							 SYSC_OMAP2_AUTOIDLE)>;
+					ti,syss-mask = <1>;
+					clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
+					clock-names = "fck";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x2000 0x1000>;
 
-			hdmi: encoder@58060000 {
-				compatible = "ti,omap5-hdmi";
-				reg = <0x58040000 0x200>,
-				      <0x58040200 0x80>,
-				      <0x58040300 0x80>,
-				      <0x58060000 0x19000>;
-				reg-names = "wp", "pll", "phy", "core";
-				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-				ti,hwmods = "dss_hdmi";
-				clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 9>,
-					 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>;
-				clock-names = "fck", "sys_clk";
-				dmas = <&sdma 76>;
-				dma-names = "audio_tx";
+					rfbi: encoder@0  {
+						compatible = "ti,omap5-rfbi";
+						reg = <0 0x100>;
+						status = "disabled";
+						clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>, <&l3_iclk_div>;
+						clock-names = "fck", "ick";
+					};
+				};
+
+				target-module@5000 {
+					compatible = "ti,sysc-omap2", "ti,sysc";
+					reg = <0x5000 0x4>,
+					      <0x5010 0x4>,
+					      <0x5014 0x4>;
+					reg-names = "rev", "sysc", "syss";
+					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+							 SYSC_OMAP2_ENAWAKEUP |
+							 SYSC_OMAP2_SOFTRESET |
+							 SYSC_OMAP2_AUTOIDLE)>;
+					ti,syss-mask = <1>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x5000 0x1000>;
+
+					dsi1: encoder@0 {
+						compatible = "ti,omap5-dsi";
+						reg = <0 0x200>,
+						      <0x200 0x40>,
+						      <0x300 0x40>;
+						reg-names = "proto", "phy", "pll";
+						interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+						status = "disabled";
+						clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
+						clock-names = "fck";
+					};
+				};
+
+				target-module@9000 {
+					compatible = "ti,sysc-omap2", "ti,sysc";
+					reg = <0x9000 0x4>,
+					      <0x9010 0x4>,
+					      <0x9014 0x4>;
+					reg-names = "rev", "sysc", "syss";
+					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+							 SYSC_OMAP2_ENAWAKEUP |
+							 SYSC_OMAP2_SOFTRESET |
+							 SYSC_OMAP2_AUTOIDLE)>;
+					ti,syss-mask = <1>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x9000 0x1000>;
+
+					dsi2: encoder@0 {
+						compatible = "ti,omap5-dsi";
+						reg = <0 0x200>,
+						      <0x200 0x40>,
+						      <0x300 0x40>;
+						reg-names = "proto", "phy", "pll";
+						interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+						status = "disabled";
+						clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
+						clock-names = "fck";
+					};
+				};
+
+				target-module@40000 {
+					compatible = "ti,sysc-omap4", "ti,sysc";
+					reg = <0x40000 0x4>,
+					      <0x40010 0x4>;
+					reg-names = "rev", "sysc";
+					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>,
+							<SYSC_IDLE_SMART_WKUP>;
+					ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET)>;
+					clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 9>,
+						 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
+					clock-names = "fck", "dss_clk";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x40000 0x40000>;
+
+					hdmi: encoder@0 {
+						compatible = "ti,omap5-hdmi";
+						reg = <0 0x200>,
+						      <0x200 0x80>,
+						      <0x300 0x80>,
+						      <0x20000 0x19000>;
+						reg-names = "wp", "pll", "phy", "core";
+						interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+						status = "disabled";
+						clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 9>,
+							 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>;
+						clock-names = "fck", "sys_clk";
+						dmas = <&sdma 76>;
+						dma-names = "audio_tx";
+					};
+				};
 			};
 		};
 
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 8b79b41..2687c4e 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -350,6 +350,7 @@ tlmm_pinmux: pinctrl@800000 {
 			reg = <0x800000 0x4000>;
 
 			gpio-controller;
+			gpio-ranges = <&tlmm_pinmux 0 0 90>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
index fa1852e..bf6a035 100644
--- a/arch/arm/boot/dts/qcom-apq8084.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
@@ -403,6 +403,7 @@ tlmm: pinctrl@fd510000 {
 			compatible = "qcom,apq8084-pinctrl";
 			reg = <0xfd510000 0x4000>;
 			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 147>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index 71bb25a..bfa9ce4 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -201,6 +201,7 @@ tlmm: pinctrl@1000000 {
 			compatible = "qcom,ipq4019-pinctrl";
 			reg = <0x01000000 0x300000>;
 			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 100>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 16c0da9..4021f66 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -119,6 +119,7 @@ qcom_pinmux: pinmux@800000 {
 			reg = <0x800000 0x4000>;
 
 			gpio-controller;
+			gpio-ranges = <&qcom_pinmux 0 0 69>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi
index 356e953..347b4f7 100644
--- a/arch/arm/boot/dts/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi
@@ -128,6 +128,7 @@ timer@200a000 {
 		msmgpio: pinctrl@800000 {
 			compatible = "qcom,mdm9615-pinctrl";
 			gpio-controller;
+			gpio-ranges = <&msmgpio 0 0 88>;
 			#gpio-cells = <2>;
 			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
index ec5cbc4..480fc08 100644
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -115,6 +115,7 @@ tlmm: pinctrl@800000 {
 			reg = <0x800000 0x4000>;
 
 			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 173>;
 			#gpio-cells = <2>;
 			interrupts = <0 16 0x4>;
 			interrupt-controller;
diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
index f2aeaccdc..172ea3c 100644
--- a/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -107,6 +107,7 @@ timer@200a000 {
 		msmgpio: pinctrl@800000 {
 			compatible = "qcom,msm8960-pinctrl";
 			gpio-controller;
+			gpio-ranges = <&msmgpio 0 0 152>;
 			#gpio-cells = <2>;
 			interrupts = <0 16 0x4>;
 			interrupt-controller;
diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
index 3487daf..32b474b 100644
--- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -12,6 +12,7 @@ / {
 
 	aliases {
 		serial0 = &blsp1_uart1;
+		serial1 = &blsp2_uart10;
 	};
 
 	chosen {
@@ -355,6 +356,57 @@ te {
 				bias-disable;
 			};
 		};
+
+		bt_pin: bt {
+			hostwake {
+				pins = "gpio42";
+				function = "gpio";
+			};
+
+			devwake {
+				pins = "gpio62";
+				function = "gpio";
+			};
+
+			shutdown {
+				pins = "gpio41";
+				function = "gpio";
+			};
+		};
+
+		blsp2_uart10_pin_a: blsp2-uart10-pin-active {
+			tx {
+				pins = "gpio53";
+				function = "blsp_uart10";
+
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			rx {
+				pins = "gpio54";
+				function = "blsp_uart10";
+
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cts {
+				pins = "gpio55";
+				function = "blsp_uart10";
+
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			rts {
+				pins = "gpio56";
+				function = "blsp_uart10";
+
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
 	};
 
 	sdhci@f9824900 {
@@ -418,6 +470,25 @@ volume-down {
 		};
 	};
 
+	serial@f9960000 {
+		status = "ok";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&blsp2_uart10_pin_a>;
+
+		bluetooth {
+			compatible = "brcm,bcm43438-bt";
+			max-speed = <3000000>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&bt_pin>;
+
+			host-wakeup-gpios = <&msmgpio 42 GPIO_ACTIVE_HIGH>;
+			device-wakeup-gpios = <&msmgpio 62 GPIO_ACTIVE_HIGH>;
+			shutdown-gpios = <&msmgpio 41 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
 	i2c@f9967000 {
 		status = "ok";
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
index 450b832..611bae9 100644
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
@@ -260,6 +260,31 @@ l24 {
 };
 
 &soc {
+	usb@f9a55000 {
+		status = "ok";
+
+		phys = <&usb_hs1_phy>;
+		phy-select = <&tcsr 0xb000 0>;
+		extcon = <&smbb>, <&usb_id>;
+		vbus-supply = <&chg_otg>;
+
+		hnp-disable;
+		srp-disable;
+		adp-disable;
+
+		ulpi {
+			phy@a {
+				status = "ok";
+
+				v1p8-supply = <&pm8941_l6>;
+				v3p3-supply = <&pm8941_l24>;
+
+				extcon = <&smbb>;
+				qcom,init-seq = /bits/ 8 <0x1 0x64>;
+			};
+		};
+	};
+
 	sdhci@f9824900 {
 		status = "ok";
 
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 4b161b8..2ea2308 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -715,6 +715,15 @@ blsp1_uart2: serial@f991e000 {
 			status = "disabled";
 		};
 
+		blsp2_uart10: serial@f9960000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf9960000 0x1000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_UART4_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
 		sdhci@f9824900 {
 			compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
 			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
@@ -925,6 +934,7 @@ msmgpio: pinctrl@fd510000 {
 			compatible = "qcom,msm8974-pinctrl";
 			reg = <0xfd510000 0x4000>;
 			gpio-controller;
+			gpio-ranges = <&msmgpio 0 0 146>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/r7s72100-gr-peach.dts b/arch/arm/boot/dts/r7s72100-gr-peach.dts
index fe1a4aa..2562cc9 100644
--- a/arch/arm/boot/dts/r7s72100-gr-peach.dts
+++ b/arch/arm/boot/dts/r7s72100-gr-peach.dts
@@ -41,6 +41,9 @@ flash@18000000 {
 		bank-width = <4>;
 		device-width = <1>;
 
+		clocks = <&mstp9_clks R7S72100_CLK_SPIBSC0>;
+		power-domains = <&cpg_clocks>;
+
 		#address-cells = <1>;
 		#size-cells = <1>;
 
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index 75b2796..0a567d8 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -467,11 +467,12 @@ mstp9_clks: mstp9_clks@fcfe0438 {
 			#clock-cells = <1>;
 			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0xfcfe0438 4>;
-			clocks = <&p0_clk>, <&p0_clk>, <&p0_clk>, <&p0_clk>;
+			clocks = <&p0_clk>, <&p0_clk>, <&p0_clk>, <&p0_clk>, <&b_clk>, <&b_clk>;
 			clock-indices = <
 				R7S72100_CLK_I2C0 R7S72100_CLK_I2C1 R7S72100_CLK_I2C2 R7S72100_CLK_I2C3
+				R7S72100_CLK_SPIBSC0 R7S72100_CLK_SPIBSC1
 			>;
-			clock-output-names = "i2c0", "i2c1", "i2c2", "i2c3";
+			clock-output-names = "i2c0", "i2c1", "i2c2", "i2c3", "spibsc0", "spibsc1";
 		};
 
 		mstp10_clks: mstp10_clks@fcfe043c {
diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
index a5351dd..b088e8e 100644
--- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts
+++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
@@ -157,11 +157,8 @@ vdd_dvfs: regulator@1b {
 
 &cpu0 {
 	cpu0-supply = <&vdd_dvfs>;
-	operating-points = <
-		/* kHz  uV */
-		1950000 1115000
-		1462500  995000
-	>;
+	operating-points = <1950000 1115000>,	/* kHz  uV */
+			   <1462500  995000>;
 	voltage-tolerance = <1>; /* 1% */
 };
 
diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index 1cd19a5..e8b340b 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -1669,9 +1669,10 @@ du: display@feb00000 {
 			reg = <0 0xfeb00000 0 0x40000>;
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 724>,
-				 <&cpg CPG_MOD 723>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
 			clock-names = "du.0", "du.1";
+			resets = <&cpg 724>;
+			reset-names = "du.0";
 			status = "disabled";
 
 			ports {
diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi
index 1c82dd0..def840b 100644
--- a/arch/arm/boot/dts/r8a7744.dtsi
+++ b/arch/arm/boot/dts/r8a7744.dtsi
@@ -1655,9 +1655,10 @@ du: display@feb00000 {
 			reg = <0 0xfeb00000 0 0x40000>;
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 724>,
-				 <&cpg CPG_MOD 723>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
 			clock-names = "du.0", "du.1";
+			resets = <&cpg 724>;
+			reset-names = "du.0";
 			status = "disabled";
 
 			ports {
diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts
index 2aeebfc..92aa26b 100644
--- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts
+++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts
@@ -108,6 +108,12 @@ adv7511_out: endpoint {
 	};
 };
 
+&lcd_panel {
+	status = "disabled";
+
+	/delete-node/ port;
+};
+
 &pfc {
 	can1_pins: can1 {
 		groups = "can1_data_b";
diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
index 58d369a..b15b1b0 100644
--- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
+++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
@@ -30,6 +30,7 @@
 
 /dts-v1/;
 #include "r8a7745-iwg22m.dtsi"
+#include <dt-bindings/pwm/pwm.h>
 
 / {
 	model = "iWave Systems RainboW-G22D-SODIMM board based on RZ/G1E";
@@ -78,6 +79,49 @@ vccq_sdhi0: regulator-vccq-sdhi0 {
 		gpios-states = <1>;
 		states = <3300000 1>, <1800000 0>;
 	};
+
+	vccq_panel: regulator-vccq-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "Panel VccQ";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		enable-active-high;
+	};
+
+	backlight_lcd: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&tpu 3 5000000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+	};
+
+	lcd_panel: lcd {
+		compatible = "edt,etm043080dh6gp";
+		power-supply = <&vccq_panel>;
+		backlight = <&backlight_lcd>;
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&du_out_rgb0>;
+			};
+		};
+	};
+};
+
+&du {
+	pinctrl-0 = <&du0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&lcd_in>;
+			};
+		};
+	};
 };
 
 &avb {
@@ -127,6 +171,39 @@ &i2c5 {
 	status = "okay";
 	clock-frequency = <400000>;
 
+	stmpe811@44 {
+		compatible = "st,stmpe811";
+		reg = <0x44>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+
+		/* 3.25 MHz ADC clock speed */
+		st,adc-freq = <1>;
+		/* ADC converstion time: 80 clocks */
+		st,sample-time = <4>;
+		/* 12-bit ADC */
+		st,mod-12b = <1>;
+		/* internal ADC reference */
+		st,ref-sel = <0>;
+
+		stmpe_touchscreen {
+			compatible = "st,stmpe-ts";
+			/* 8 sample average control */
+			st,ave-ctrl = <3>;
+			/* 7 length fractional part in z */
+			st,fraction-z = <7>;
+			/*
+			 * 50 mA typical 80 mA max touchscreen drivers
+			 * current limit value
+			 */
+			st,i-drive = <1>;
+			/* 1 ms panel driver settling time */
+			st,settling = <3>;
+			/* 5 ms touch detect interrupt delay */
+			st,touch-det-delay = <5>;
+		};
+	};
+
 	sgtl5000: codec@a {
 		compatible = "fsl,sgtl5000";
 		#sound-dai-cells = <0>;
@@ -149,11 +226,21 @@ avb_pins: avb {
 		function = "avb";
 	};
 
+	backlight_pins: backlight {
+		groups = "tpu_to3_c";
+		function = "tpu";
+	};
+
 	can0_pins: can0 {
 		groups = "can0_data";
 		function = "can0";
 	};
 
+	du0_pins: du0 {
+		groups = "du0_rgb666", "du0_sync", "du0_disp", "du0_clk0_out";
+		function = "du0";
+	};
+
 	hscif1_pins: hscif1 {
 		groups = "hscif1_data", "hscif1_ctrl";
 		function = "hscif1";
@@ -229,6 +316,12 @@ &ssi4 {
 	shared-pin;
 };
 
+&tpu {
+	pinctrl-0 = <&backlight_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
 &usbphy {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
index 3f88a7e..7ab58d8 100644
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -1506,11 +1506,12 @@ vsp@fe930000 {
 		du: display@feb00000 {
 			compatible = "renesas,du-r8a7745";
 			reg = <0 0xfeb00000 0 0x40000>;
-			reg-names = "du";
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
 			clock-names = "du.0", "du.1";
+			resets = <&cpg 724>;
+			reset-names = "du.0";
 			status = "disabled";
 
 			ports {
diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi
index 6efcef1..f551531 100644
--- a/arch/arm/boot/dts/r8a77470.dtsi
+++ b/arch/arm/boot/dts/r8a77470.dtsi
@@ -942,9 +942,10 @@ du: display@feb00000 {
 			reg = <0 0xfeb00000 0 0x40000>;
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 724>,
-				 <&cpg CPG_MOD 723>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
 			clock-names = "du.0", "du.1";
+			resets = <&cpg 724>;
+			reset-names = "du.0";
 			status = "disabled";
 
 			ports {
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 097fd93..69745de 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -674,6 +674,7 @@ phy1: ethernet-phy@1 {
 		interrupt-parent = <&irqc0>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 		micrel,led-mode = <1>;
+		reset-gpios = <&gpio5 31 GPIO_ACTIVE_LOW>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/r8a7790-stout.dts b/arch/arm/boot/dts/r8a7790-stout.dts
index a315ba7..4138efb 100644
--- a/arch/arm/boot/dts/r8a7790-stout.dts
+++ b/arch/arm/boot/dts/r8a7790-stout.dts
@@ -203,6 +203,7 @@ phy1: ethernet-phy@1 {
 		interrupt-parent = <&irqc0>;
 		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 		micrel,led-mode = <1>;
+		reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 334ba19..e5ef9fd 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -1719,6 +1719,8 @@ du: display@feb00000 {
 			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
 				 <&cpg CPG_MOD 722>;
 			clock-names = "du.0", "du.1", "du.2";
+			resets = <&cpg 724>;
+			reset-names = "du.0";
 			status = "disabled";
 
 			ports {
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 2b096d5..687167b 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -633,6 +633,7 @@ phy1: ethernet-phy@1 {
 		interrupt-parent = <&irqc0>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 		micrel,led-mode = <1>;
+		reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts
index f9ece7a..a8e0335 100644
--- a/arch/arm/boot/dts/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/r8a7791-porter.dts
@@ -307,6 +307,7 @@ phy1: ethernet-phy@1 {
 		interrupt-parent = <&irqc0>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 		micrel,led-mode = <1>;
+		reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 59a55e8..6e5bd86 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -1681,9 +1681,10 @@ du: display@feb00000 {
 			reg = <0 0xfeb00000 0 0x40000>;
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 724>,
-				 <&cpg CPG_MOD 723>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
 			clock-names = "du.0", "du.1";
+			resets = <&cpg 724>;
+			reset-names = "du.0";
 			status = "disabled";
 
 			ports {
diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi
index 39af16ca..4627eef 100644
--- a/arch/arm/boot/dts/r8a7792.dtsi
+++ b/arch/arm/boot/dts/r8a7792.dtsi
@@ -852,9 +852,10 @@ du: display@feb00000 {
 			reg = <0 0xfeb00000 0 0x40000>;
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 724>,
-				 <&cpg CPG_MOD 723>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
 			clock-names = "du.0", "du.1";
+			resets = <&cpg 724>;
+			reset-names = "du.0";
 			status = "disabled";
 
 			ports {
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index 22ca7cd..cfe06a7 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -591,6 +591,7 @@ phy1: ethernet-phy@1 {
 		interrupt-parent = <&irqc0>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 		micrel,led-mode = <1>;
+		reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index eef035c..dadbda1 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -1341,9 +1341,10 @@ du: display@feb00000 {
 			reg = <0 0xfeb00000 0 0x40000>;
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 724>,
-				 <&cpg CPG_MOD 723>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
 			clock-names = "du.0", "du.1";
+			resets = <&cpg 724>;
+			reset-names = "du.0";
 			status = "disabled";
 
 			ports {
diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
index f79fce7..935935c 100644
--- a/arch/arm/boot/dts/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/r8a7794-alt.dts
@@ -343,6 +343,7 @@ phy1: ethernet-phy@1 {
 		interrupt-parent = <&irqc0>;
 		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
 		micrel,led-mode = <1>;
+		reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts
index 2c16ad8..9aaa96e 100644
--- a/arch/arm/boot/dts/r8a7794-silk.dts
+++ b/arch/arm/boot/dts/r8a7794-silk.dts
@@ -394,6 +394,7 @@ phy1: ethernet-phy@1 {
 		interrupt-parent = <&irqc0>;
 		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
 		micrel,led-mode = <1>;
+		reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 05ef79c..2c9e7a1 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -1356,6 +1356,8 @@ du: display@feb00000 {
 				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
 			clock-names = "du.0", "du.1";
+			resets = <&cpg 724>;
+			reset-names = "du.0";
 			status = "disabled";
 
 			ports {
diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts
index fb3cf00..2ff9f15 100644
--- a/arch/arm/boot/dts/rk3036-kylin.dts
+++ b/arch/arm/boot/dts/rk3036-kylin.dts
@@ -319,7 +319,7 @@ &sdio {
 	bus-width = <4>;
 	cap-sd-highspeed;
 	cap-sdio-irq;
-	default-sample-phase = <90>;
+	rockchip,default-sample-phase = <90>;
 	keep-power-in-suspend;
 	mmc-pwrseq = <&sdio_pwrseq>;
 	non-removable;
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index cf36e25..781ac75 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -54,7 +54,7 @@ cpu1: cpu@f01 {
 		};
 	};
 
-	amba {
+	amba: bus {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -101,7 +101,7 @@ xin24m: oscillator {
 		#clock-cells = <0>;
 	};
 
-	bus_intmem@10080000 {
+	bus_intmem: sram@10080000 {
 		compatible = "mmio-sram";
 		reg = <0x10080000 0x2000>;
 		#address-cells = <1>;
@@ -263,7 +263,7 @@ emmc: mmc@1021c000 {
 		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
 			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
 		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
-		default-sample-phase = <158>;
+		rockchip,default-sample-phase = <158>;
 		disable-wp;
 		dmas = <&pdma 12>;
 		dma-names = "rx-tx";
@@ -281,8 +281,6 @@ i2s: i2s@10220000 {
 		compatible = "rockchip,rk3036-i2s", "rockchip,rk3066-i2s";
 		reg = <0x10220000 0x4000>;
 		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 		clock-names = "i2s_clk", "i2s_hclk";
 		clocks = <&cru SCLK_I2S>, <&cru HCLK_I2S>;
 		dmas = <&pdma 0>, <&pdma 1>;
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index 3d1b02f..b599394 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -156,14 +156,12 @@ i2s0: i2s@10118000 {
 		compatible = "rockchip,rk3066-i2s";
 		reg = <0x10118000 0x2000>;
 		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s0_bus>;
+		clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0>;
+		clock-names = "i2s_clk", "i2s_hclk";
 		dmas = <&dmac1_s 4>, <&dmac1_s 5>;
 		dma-names = "tx", "rx";
-		clock-names = "i2s_hclk", "i2s_clk";
-		clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
 		rockchip,playback-channels = <8>;
 		rockchip,capture-channels = <2>;
 		#sound-dai-cells = <0>;
@@ -174,14 +172,12 @@ i2s1: i2s@1011a000 {
 		compatible = "rockchip,rk3066-i2s";
 		reg = <0x1011a000 0x2000>;
 		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s1_bus>;
+		clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S1>;
+		clock-names = "i2s_clk", "i2s_hclk";
 		dmas = <&dmac1_s 6>, <&dmac1_s 7>;
 		dma-names = "tx", "rx";
-		clock-names = "i2s_hclk", "i2s_clk";
-		clocks = <&cru HCLK_I2S1>, <&cru SCLK_I2S1>;
 		rockchip,playback-channels = <2>;
 		rockchip,capture-channels = <2>;
 		#sound-dai-cells = <0>;
@@ -192,14 +188,12 @@ i2s2: i2s@1011c000 {
 		compatible = "rockchip,rk3066-i2s";
 		reg = <0x1011c000 0x2000>;
 		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s2_bus>;
+		clocks = <&cru SCLK_I2S2>, <&cru HCLK_I2S2>;
+		clock-names = "i2s_clk", "i2s_hclk";
 		dmas = <&dmac1_s 9>, <&dmac1_s 10>;
 		dma-names = "tx", "rx";
-		clock-names = "i2s_hclk", "i2s_clk";
-		clocks = <&cru HCLK_I2S2>, <&cru SCLK_I2S2>;
 		rockchip,playback-channels = <2>;
 		rockchip,capture-channels = <2>;
 		#sound-dai-cells = <0>;
diff --git a/arch/arm/boot/dts/rk3188-bqedison2qc.dts b/arch/arm/boot/dts/rk3188-bqedison2qc.dts
index ad1afd4..66a0ff1 100644
--- a/arch/arm/boot/dts/rk3188-bqedison2qc.dts
+++ b/arch/arm/boot/dts/rk3188-bqedison2qc.dts
@@ -58,20 +58,25 @@ gpio-poweroff {
 
 	lvds-encoder {
 		compatible = "ti,sn75lvds83", "lvds-encoder";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		port@0 {
-			reg = <0>;
-			lvds_in_vop0: endpoint {
-				remote-endpoint = <&vop0_out_lvds>;
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_in_vop0: endpoint {
+					remote-endpoint = <&vop0_out_lvds>;
+				};
 			};
-		};
 
-		port@1 {
-			reg = <1>;
-			lvds_out_panel: endpoint {
-				remote-endpoint = <&panel_in_lvds>;
+			port@1 {
+				reg = <1>;
+
+				lvds_out_panel: endpoint {
+					remote-endpoint = <&panel_in_lvds>;
+				};
 			};
 		};
 	};
@@ -465,7 +470,7 @@ &mmc1 {
 	non-removable;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_bus4>;
-	vmmcq-supply = <&vccio_wl>;
+	vqmmc-supply = <&vccio_wl>;
 	#address-cells = <1>;
 	#size-cells = <0>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index 10ede65..2298a8d 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -166,14 +166,12 @@ i2s0: i2s@1011a000 {
 		compatible = "rockchip,rk3188-i2s", "rockchip,rk3066-i2s";
 		reg = <0x1011a000 0x2000>;
 		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s0_bus>;
+		clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0>;
+		clock-names = "i2s_clk", "i2s_hclk";
 		dmas = <&dmac1_s 6>, <&dmac1_s 7>;
 		dma-names = "tx", "rx";
-		clock-names = "i2s_hclk", "i2s_clk";
-		clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
 		rockchip,playback-channels = <2>;
 		rockchip,capture-channels = <2>;
 		#sound-dai-cells = <0>;
@@ -184,8 +182,8 @@ spdif: sound@1011e000 {
 		compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif";
 		reg = <0x1011e000 0x2000>;
 		#sound-dai-cells = <0>;
-		clock-names = "hclk", "mclk";
-		clocks = <&cru HCLK_SPDIF>, <&cru SCLK_SPDIF>;
+		clocks = <&cru SCLK_SPDIF>, <&cru HCLK_SPDIF>;
+		clock-names = "mclk", "hclk";
 		dmas = <&dmac1_s 8>;
 		dma-names = "tx";
 		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index 4e90efd..06172eb 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -95,7 +95,7 @@ opp-1200000000 {
 		};
 	};
 
-	amba {
+	amba: bus {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -152,8 +152,6 @@ i2s1: i2s1@100b0000 {
 		compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s";
 		reg = <0x100b0000 0x4000>;
 		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 		clock-names = "i2s_clk", "i2s_hclk";
 		clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S1_8CH>;
 		dmas = <&pdma 14>, <&pdma 15>;
@@ -167,8 +165,6 @@ i2s0: i2s0@100c0000 {
 		compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s";
 		reg = <0x100c0000 0x4000>;
 		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 		clock-names = "i2s_clk", "i2s_hclk";
 		clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0_8CH>;
 		dmas = <&pdma 11>, <&pdma 12>;
@@ -193,8 +189,6 @@ i2s2: i2s2@100e0000 {
 		compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s";
 		reg = <0x100e0000 0x4000>;
 		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 		clock-names = "i2s_clk", "i2s_hclk";
 		clocks = <&cru SCLK_I2S2>, <&cru HCLK_I2S2_2CH>;
 		dmas = <&pdma 0>, <&pdma 1>;
@@ -698,7 +692,7 @@ emmc: mmc@30020000 {
 			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
 		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		bus-width = <8>;
-		default-sample-phase = <158>;
+		rockchip,default-sample-phase = <158>;
 		fifo-depth = <0x100>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
@@ -718,7 +712,6 @@ usb_otg: usb@30040000 {
 		g-np-tx-fifo-size = <16>;
 		g-rx-fifo-size = <280>;
 		g-tx-fifo-size = <256 128 128 64 32 16>;
-		g-use-dma;
 		phys = <&u2phy0_otg>;
 		phy-names = "usb2-phy";
 		status = "disabled";
@@ -729,7 +722,6 @@ usb_host0_ehci: usb@30080000 {
 		reg = <0x30080000 0x20000>;
 		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_HOST0>, <&u2phy0>;
-		clock-names = "usbhost", "utmi";
 		phys = <&u2phy0_host>;
 		phy-names = "usb";
 		status = "disabled";
@@ -740,7 +732,6 @@ usb_host0_ohci: usb@300a0000 {
 		reg = <0x300a0000 0x20000>;
 		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_HOST0>, <&u2phy0>;
-		clock-names = "usbhost", "utmi";
 		phys = <&u2phy0_host>;
 		phy-names = "usb";
 		status = "disabled";
@@ -751,7 +742,6 @@ usb_host1_ehci: usb@300c0000 {
 		reg = <0x300c0000 0x20000>;
 		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_HOST1>, <&u2phy1>;
-		clock-names = "usbhost", "utmi";
 		phys = <&u2phy1_otg>;
 		phy-names = "usb";
 		status = "disabled";
@@ -762,7 +752,6 @@ usb_host1_ohci: usb@300e0000 {
 		reg = <0x300e0000 0x20000>;
 		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_HOST1>, <&u2phy1>;
-		clock-names = "usbhost", "utmi";
 		phys = <&u2phy1_otg>;
 		phy-names = "usb";
 		status = "disabled";
@@ -775,7 +764,6 @@ usb_host2_ehci: usb@30100000 {
 		clocks = <&cru HCLK_HOST2>, <&u2phy1>;
 		phys = <&u2phy1_host>;
 		phy-names = "usb";
-		clock-names = "usbhost", "utmi";
 		status = "disabled";
 	};
 
@@ -784,7 +772,6 @@ usb_host2_ohci: usb@30120000 {
 		reg = <0x30120000 0x20000>;
 		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_HOST2>, <&u2phy1>;
-		clock-names = "usbhost", "utmi";
 		phys = <&u2phy1_host>;
 		phy-names = "usb";
 		status = "disabled";
diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts
index 8008076..be695b8 100644
--- a/arch/arm/boot/dts/rk3288-evb-act8846.dts
+++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts
@@ -4,6 +4,7 @@
 #include "rk3288-evb.dtsi"
 
 / {
+	model = "Rockchip RK3288 EVB ACT8846";
 	compatible = "rockchip,rk3288-evb-act8846", "rockchip,rk3288";
 
 	vcc_lcd: vcc-lcd {
diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts
index 1678820..42384ea 100644
--- a/arch/arm/boot/dts/rk3288-evb-rk808.dts
+++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts
@@ -4,6 +4,7 @@
 #include "rk3288-evb.dtsi"
 
 / {
+	model = "Rockchip RK3288 EVB RK808";
 	compatible = "rockchip,rk3288-evb-rk808", "rockchip,rk3288";
 };
 
diff --git a/arch/arm/boot/dts/rk3288-firefly-reload.dts b/arch/arm/boot/dts/rk3288-firefly-reload.dts
index 1574383..8c38bda 100644
--- a/arch/arm/boot/dts/rk3288-firefly-reload.dts
+++ b/arch/arm/boot/dts/rk3288-firefly-reload.dts
@@ -234,6 +234,7 @@ &i2s {
 };
 
 &saradc {
+	vref-supply = <&vcc_18>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts
index a6ffc38..a258c7a 100644
--- a/arch/arm/boot/dts/rk3288-r89.dts
+++ b/arch/arm/boot/dts/rk3288-r89.dts
@@ -9,6 +9,7 @@
 #include "rk3288.dtsi"
 
 / {
+	model = "Netxeon R89";
 	compatible = "netxeon,r89", "rockchip,rk3288";
 
 	memory@0 {
diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
index 312582c..acfaa12 100644
--- a/arch/arm/boot/dts/rk3288-tinker.dtsi
+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
@@ -276,6 +276,7 @@ regulator-state-mem {
 			};
 
 			vccio_sd: LDO_REG5 {
+				regulator-always-on;
 				regulator-boot-on;
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/rk3288-vyasa.dts b/arch/arm/boot/dts/rk3288-vyasa.dts
index ba06e9f..385dd59 100644
--- a/arch/arm/boot/dts/rk3288-vyasa.dts
+++ b/arch/arm/boot/dts/rk3288-vyasa.dts
@@ -78,6 +78,18 @@ vsus_5v: vsus-5v {
 		vin-supply = <&vcc_io>;
 	};
 
+	vcc50_hdmi: vcc50-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc50_hdmi";
+		enable-active-high;
+		gpio = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>; /* HDMI_EN */
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc50_hdmi_en>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vsus_5v>;
+	};
+
 	vusb1_5v: vusb1-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "vusb1_5v";
@@ -150,7 +162,7 @@ &gpu {
 };
 
 &hdmi {
-	ddc-i2c-bus = <&i2c2>;
+	ddc-i2c-bus = <&i2c5>;
 	status = "okay";
 };
 
@@ -286,15 +298,15 @@ regulator-state-mem {
 				};
 			};
 
-			vcc10_lcd: LDO_REG6 {
-				regulator-name = "vcc10_lcd";
+			vdd10_lcd: LDO_REG6 {
+				regulator-name = "vdd10_lcd";
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
+					regulator-suspend-microvolt = <1000000>;
 				};
 			};
 
@@ -347,7 +359,7 @@ regulator-state-mem {
 	};
 };
 
-&i2c2 {
+&i2c5 {
 	status = "okay";
 };
 
@@ -446,6 +458,12 @@ phy_rst: phy-rst {
 		};
 	};
 
+	hdmi {
+		vcc50_hdmi_en: vcc50-hdmi-en {
+			rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	pmic {
 		pmic_int: pmic-int {
 			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 9beb662..0cd8877 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -155,7 +155,7 @@ opp-1608000000 {
 		};
 	};
 
-	amba {
+	amba: bus {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -420,6 +420,8 @@ uart0: serial@ff180000 {
 		reg-io-width = <4>;
 		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
 		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac_peri 1>, <&dmac_peri 2>;
+		dma-names = "tx", "rx";
 		pinctrl-names = "default";
 		pinctrl-0 = <&uart0_xfer>;
 		status = "disabled";
@@ -433,6 +435,8 @@ uart1: serial@ff190000 {
 		reg-io-width = <4>;
 		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
 		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac_peri 3>, <&dmac_peri 4>;
+		dma-names = "tx", "rx";
 		pinctrl-names = "default";
 		pinctrl-0 = <&uart1_xfer>;
 		status = "disabled";
@@ -459,6 +463,8 @@ uart3: serial@ff1b0000 {
 		reg-io-width = <4>;
 		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
 		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac_peri 7>, <&dmac_peri 8>;
+		dma-names = "tx", "rx";
 		pinctrl-names = "default";
 		pinctrl-0 = <&uart3_xfer>;
 		status = "disabled";
@@ -472,6 +478,8 @@ uart4: serial@ff1c0000 {
 		reg-io-width = <4>;
 		clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
 		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac_peri 9>, <&dmac_peri 10>;
+		dma-names = "tx", "rx";
 		pinctrl-names = "default";
 		pinctrl-0 = <&uart4_xfer>;
 		status = "disabled";
@@ -601,7 +609,6 @@ usb_host0_ehci: usb@ff500000 {
 		reg = <0x0 0xff500000 0x0 0x100>;
 		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_USBHOST0>;
-		clock-names = "usbhost";
 		phys = <&usbphy1>;
 		phy-names = "usb";
 		status = "disabled";
@@ -644,7 +651,6 @@ usb_hsic: usb@ff5c0000 {
 		reg = <0x0 0xff5c0000 0x0 0x100>;
 		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_HSIC>;
-		clock-names = "usbhost";
 		status = "disabled";
 	};
 
@@ -718,7 +724,7 @@ pwm3: pwm@ff680030 {
 		status = "disabled";
 	};
 
-	bus_intmem@ff700000 {
+	bus_intmem: sram@ff700000 {
 		compatible = "mmio-sram";
 		reg = <0x0 0xff700000 0x0 0x18000>;
 		#address-cells = <1>;
@@ -730,7 +736,7 @@ smp-sram@0 {
 		};
 	};
 
-	sram@ff720000 {
+	pmu_sram: sram@ff720000 {
 		compatible = "rockchip,rk3288-pmu-sram", "mmio-sram";
 		reg = <0x0 0xff720000 0x0 0x1000>;
 	};
@@ -946,8 +952,8 @@ spdif: sound@ff88b0000 {
 		compatible = "rockchip,rk3288-spdif", "rockchip,rk3066-spdif";
 		reg = <0x0 0xff8b0000 0x0 0x10000>;
 		#sound-dai-cells = <0>;
-		clock-names = "hclk", "mclk";
-		clocks = <&cru HCLK_SPDIF8CH>, <&cru SCLK_SPDIF8CH>;
+		clocks = <&cru SCLK_SPDIF8CH>, <&cru HCLK_SPDIF8CH>;
+		clock-names = "mclk", "hclk";
 		dmas = <&dmac_bus_s 3>;
 		dma-names = "tx";
 		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
@@ -962,12 +968,10 @@ i2s: i2s@ff890000 {
 		reg = <0x0 0xff890000 0x0 0x10000>;
 		#sound-dai-cells = <0>;
 		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
+		clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0>;
+		clock-names = "i2s_clk", "i2s_hclk";
 		dmas = <&dmac_bus_s 0>, <&dmac_bus_s 1>;
 		dma-names = "tx", "rx";
-		clock-names = "i2s_hclk", "i2s_clk";
-		clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s0_bus>;
 		rockchip,playback-channels = <8>;
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index 241f43e..f9fcb7e9 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -32,7 +32,7 @@ aliases {
 		spi1 = &spi1;
 	};
 
-	amba {
+	amba: bus {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -91,7 +91,7 @@ gpu: gpu@10090000 {
 		status = "disabled";
 	};
 
-	L2: l2-cache-controller@10138000 {
+	L2: cache-controller@10138000 {
 		compatible = "arm,pl310-cache";
 		reg = <0x10138000 0x1000>;
 		cache-unified;
diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi
index 1fd06e7..f9cfe2c 100644
--- a/arch/arm/boot/dts/rv1108.dtsi
+++ b/arch/arm/boot/dts/rv1108.dtsi
@@ -85,7 +85,7 @@ xin24m: oscillator {
 		#clock-cells = <0>;
 	};
 
-	amba {
+	amba: bus {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -102,7 +102,7 @@ pdma: pdma@102a0000 {
 		};
 	};
 
-	bus_intmem@10080000 {
+	bus_intmem: sram@10080000 {
 		compatible = "mmio-sram";
 		reg = <0x10080000 0x2000>;
 		#address-cells = <1>;
@@ -120,7 +120,6 @@ uart2: serial@10210000 {
 		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
 		clock-names = "baudclk", "apb_pclk";
 		dmas = <&pdma 6>, <&pdma 7>;
-		#dma-cells = <2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&uart2m0_xfer>;
 		status = "disabled";
@@ -136,7 +135,6 @@ uart1: serial@10220000 {
 		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
 		clock-names = "baudclk", "apb_pclk";
 		dmas = <&pdma 4>, <&pdma 5>;
-		#dma-cells = <2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&uart1_xfer>;
 		status = "disabled";
@@ -152,7 +150,6 @@ uart0: serial@10230000 {
 		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
 		clock-names = "baudclk", "apb_pclk";
 		dmas = <&pdma 2>, <&pdma 3>;
-		#dma-cells = <2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
 		status = "disabled";
@@ -208,7 +205,6 @@ spi: spi@10270000 {
 		clock-names = "spiclk", "apb_pclk";
 		dmas = <&pdma 8>, <&pdma 9>;
 		dma-names = "tx", "rx";
-		#dma-cells = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		status = "disabled";
@@ -370,7 +366,6 @@ adc: adc@1038c000 {
 		reg = <0x1038c000 0x100>;
 		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 		#io-channel-cells = <1>;
-		clock-frequency = <1000000>;
 		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
 		clock-names = "saradc", "apb_pclk";
 		status = "disabled";
@@ -499,7 +494,6 @@ usb_host_ehci: usb@30140000 {
 		reg = <0x30140000 0x20000>;
 		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_HOST0>, <&u2phy>;
-		clock-names = "usbhost", "utmi";
 		phys = <&u2phy_host>;
 		phy-names = "usb";
 		status = "disabled";
@@ -510,7 +504,6 @@ usb_host_ohci: usb@30160000 {
 		reg = <0x30160000 0x20000>;
 		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_HOST0>, <&u2phy>;
-		clock-names = "usbhost", "utmi";
 		phys = <&u2phy_host>;
 		phy-names = "usb";
 		status = "disabled";
@@ -527,7 +520,6 @@ usb_otg: usb@30180000 {
 		g-np-tx-fifo-size = <16>;
 		g-rx-fifo-size = <280>;
 		g-tx-fifo-size = <256 128 128 64 32 16>;
-		g-use-dma;
 		phys = <&u2phy_otg>;
 		phy-names = "usb2-phy";
 		status = "disabled";
diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi
index 326b393..6763423 100644
--- a/arch/arm/boot/dts/sam9x60.dtsi
+++ b/arch/arm/boot/dts/sam9x60.dtsi
@@ -686,6 +686,14 @@ rtc: rtc@fffffea8 {
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				clocks = <&clk32k 0>;
 			};
+
+			watchdog: watchdog@ffffff80 {
+				compatible = "microchip,sam9x60-wdt";
+				reg = <0xffffff80 0x24>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k 0>;
+				status = "disabled";
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 2012b74..ab550d6 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -695,7 +695,7 @@ clk32k: sckc@f8048050 {
 			};
 
 			rtc: rtc@f80480b0 {
-				compatible = "atmel,at91rm9200-rtc";
+				compatible = "atmel,sama5d2-rtc";
 				reg = <0xf80480b0 0x30>;
 				interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>;
 				clocks = <&clk32k>;
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 203d40b..f11b018 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -159,8 +159,11 @@ i2c0: i2c@f0014000 {
 				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(7)>,
 				       <&dma0 2 AT91_DMA_CFG_PER_ID(8)>;
 				dma-names = "tx", "rx";
-				pinctrl-names = "default";
+				pinctrl-names = "default", "gpio";
 				pinctrl-0 = <&pinctrl_i2c0>;
+				pinctrl-1 = <&pinctrl_i2c0_gpio>;
+				sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				clocks = <&twi0_clk>;
@@ -174,8 +177,11 @@ i2c1: i2c@f0018000 {
 				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(9)>,
 				       <&dma0 2 AT91_DMA_CFG_PER_ID(10)>;
 				dma-names = "tx", "rx";
-				pinctrl-names = "default";
+				pinctrl-names = "default", "gpio";
 				pinctrl-0 = <&pinctrl_i2c1>;
+				pinctrl-1 = <&pinctrl_i2c1_gpio>;
+				sda-gpios = <&pioC 26 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioC 27 GPIO_ACTIVE_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				clocks = <&twi1_clk>;
@@ -357,8 +363,11 @@ i2c2: i2c@f801c000 {
 				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(11)>,
 				       <&dma1 2 AT91_DMA_CFG_PER_ID(12)>;
 				dma-names = "tx", "rx";
-				pinctrl-names = "default";
+				pinctrl-names = "default", "gpio";
 				pinctrl-0 = <&pinctrl_i2c2>;
+				pinctrl-1 = <&pinctrl_i2c2_gpio>;
+				sda-gpios = <&pioA 18 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA 19 GPIO_ACTIVE_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				clocks = <&twi2_clk>;
@@ -639,6 +648,12 @@ pinctrl_i2c0: i2c0-0 {
 							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA30 periph A TWD0 pin, conflicts with URXD1, ISI_VSYNC */
 							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA31 periph A TWCK0 pin, conflicts with UTXD1, ISI_HSYNC */
 					};
+
+					pinctrl_i2c0_gpio: i2c0-gpio {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
 				};
 
 				i2c1 {
@@ -647,6 +662,12 @@ pinctrl_i2c1: i2c1-0 {
 							<AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC26 periph B TWD1 pin, conflicts with SPI1_NPCS1, ISI_D11 */
 							 AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC27 periph B TWCK1 pin, conflicts with SPI1_NPCS2, ISI_D10 */
 					};
+
+					pinctrl_i2c1_gpio: i2c1-gpio {
+						atmel,pins =
+							<AT91_PIOC 26 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOC 27 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
 				};
 
 				i2c2 {
@@ -655,6 +676,12 @@ pinctrl_i2c2: i2c2-0 {
 							<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE	/* TWD2 pin, conflicts with LCDDAT18, ISI_D2 */
 							 AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* TWCK2 pin, conflicts with LCDDAT19, ISI_D3 */
 					};
+
+					pinctrl_i2c2_gpio: i2c2-gpio {
+						atmel,pins =
+							<AT91_PIOA 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOA 19 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
 				};
 
 				isi {
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index 6ab27a7..c9c0316 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -458,8 +458,11 @@ i2c0: i2c@f8014000 {
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
 					| AT91_XDMAC_DT_PERID(3))>;
 				dma-names = "tx", "rx";
-				pinctrl-names = "default";
+				pinctrl-names = "default", "gpio";
 				pinctrl-0 = <&pinctrl_i2c0>;
+				pinctrl-1 = <&pinctrl_i2c0_gpio>;
+				sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
@@ -477,8 +480,11 @@ i2c1: i2c@f8018000 {
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
 					| AT91_XDMAC_DT_PERID(5))>;
 				dma-names = "tx", "rx";
-				pinctrl-names = "default";
+				pinctrl-names = "default", "gpio";
 				pinctrl-0 = <&pinctrl_i2c1>;
+				pinctrl-1 = <&pinctrl_i2c1_gpio>;
+				sda-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioE 30 GPIO_ACTIVE_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
@@ -519,8 +525,11 @@ i2c2: i2c@f8024000 {
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
 					| AT91_XDMAC_DT_PERID(7))>;
 				dma-names = "tx", "rx";
-				pinctrl-names = "default";
+				pinctrl-names = "default", "gpio";
 				pinctrl-0 = <&pinctrl_i2c2>;
+				pinctrl-1 = <&pinctrl_i2c2_gpio>;
+				sda-gpios = <&pioB 29 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioB 30 GPIO_ACTIVE_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 34>;
@@ -884,7 +893,7 @@ clk32k: sckc@fc068650 {
 			};
 
 			rtc@fc0686b0 {
-				compatible = "atmel,at91rm9200-rtc";
+				compatible = "atmel,sama5d4-rtc";
 				reg = <0xfc0686b0 0x30>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				clocks = <&clk32k>;
@@ -1122,6 +1131,12 @@ pinctrl_i2c0: i2c0-0 {
 							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE
 							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 					};
+
+					pinctrl_i2c0_gpio: i2c0-gpio {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
 				};
 
 				i2c1 {
@@ -1130,6 +1145,12 @@ pinctrl_i2c1: i2c1-0 {
 							<AT91_PIOE 29 AT91_PERIPH_C AT91_PINCTRL_NONE	/* TWD1, conflicts with UART0 RX and DIBP */
 							 AT91_PIOE 30 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* TWCK1, conflicts with UART0 TX and DIBN */
 					};
+
+					pinctrl_i2c1_gpio: i2c1-gpio {
+						atmel,pins =
+							<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOE 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
 				};
 
 				i2c2 {
@@ -1138,6 +1159,12 @@ pinctrl_i2c2: i2c2-0 {
 							<AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* TWD2, conflicts with RD0 and PWML1 */
 							 AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* TWCK2, conflicts with RF0 */
 					};
+
+					pinctrl_i2c2_gpio: i2c2-gpio {
+						atmel,pins =
+							<AT91_PIOB 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOB 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
 				};
 
 				isi {
diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts
index 1916f31..5a8d92a 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts
@@ -25,12 +25,9 @@ aliases {
 	cpus {
 		cpu@0 {
 			cpu0-supply = <&vdd_dvfs>;
-			operating-points = <
-				/* kHz  uV */
-				1196000 1315000
-				 598000 1175000
-				 398667 1065000
-			>;
+			operating-points = <1196000 1315000>,	/* kHz  uV */
+					   < 598000 1175000>,
+					   < 398667 1065000>;
 			voltage-tolerance = <1>; /* 1% */
 		};
 	};
diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi
index 2a86e72..3b8571b 100644
--- a/arch/arm/boot/dts/socfpga_arria10.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10.dtsi
@@ -431,8 +431,8 @@ gmac0: ethernet@ff800000 {
 			snps,perfect-filter-entries = <128>;
 			tx-fifo-depth = <4096>;
 			rx-fifo-depth = <16384>;
-			clocks = <&l4_mp_clk>;
-			clock-names = "stmmaceth";
+			clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>;
+			clock-names = "stmmaceth", "ptp_ref";
 			resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>;
 			reset-names = "stmmaceth", "stmmaceth-ocp";
 			snps,axi-config = <&socfpga_axi_setup>;
@@ -451,8 +451,8 @@ gmac1: ethernet@ff802000 {
 			snps,perfect-filter-entries = <128>;
 			tx-fifo-depth = <4096>;
 			rx-fifo-depth = <16384>;
-			clocks = <&l4_mp_clk>;
-			clock-names = "stmmaceth";
+			clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>;
+			clock-names = "stmmaceth", "ptp_ref";
 			resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>;
 			reset-names = "stmmaceth", "stmmaceth-ocp";
 			snps,axi-config = <&socfpga_axi_setup>;
@@ -471,8 +471,8 @@ gmac2: ethernet@ff804000 {
 			snps,perfect-filter-entries = <128>;
 			tx-fifo-depth = <4096>;
 			rx-fifo-depth = <16384>;
-			clocks = <&l4_mp_clk>;
-			clock-names = "stmmaceth";
+			clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>;
+			clock-names = "stmmaceth", "ptp_ref";
 			resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>;
 			reset-names = "stmmaceth", "stmmaceth-ocp";
 			snps,axi-config = <&socfpga_axi_setup>;
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts
index 9bd9e04..9aa897b 100644
--- a/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts
+++ b/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts
@@ -16,11 +16,11 @@ nand@0 {
 
 		partition@0 {
 			label = "Boot and fpga data";
-			reg = <0x0 0x1C00000>;
+			reg = <0x0 0x02000000>;
 		};
 		partition@1c00000 {
 			label = "Root Filesystem - JFFS2";
-			reg = <0x1C00000 0x6400000>;
+			reg = <0x02000000 0x06000000>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/ste-ab8500.dtsi b/arch/arm/boot/dts/ste-ab8500.dtsi
index 14d4d86..3cd6ee6 100644
--- a/arch/arm/boot/dts/ste-ab8500.dtsi
+++ b/arch/arm/boot/dts/ste-ab8500.dtsi
@@ -314,13 +314,13 @@ sound {
 		mcde@a0350000 {
 			vana-supply = <&ab8500_ldo_ana_reg>;
 
-			dsi@a0351000 {
+			dsi-controller@a0351000 {
 				vana-supply = <&ab8500_ldo_ana_reg>;
 			};
-			dsi@a0352000 {
+			dsi-controller@a0352000 {
 				vana-supply = <&ab8500_ldo_ana_reg>;
 			};
-			dsi@a0353000 {
+			dsi-controller@a0353000 {
 				vana-supply = <&ab8500_ldo_ana_reg>;
 			};
 		};
diff --git a/arch/arm/boot/dts/ste-ab8505.dtsi b/arch/arm/boot/dts/ste-ab8505.dtsi
index c72aa25..67bc69e 100644
--- a/arch/arm/boot/dts/ste-ab8505.dtsi
+++ b/arch/arm/boot/dts/ste-ab8505.dtsi
@@ -261,13 +261,13 @@ sound {
 		mcde@a0350000 {
 			vana-supply = <&ab8500_ldo_ana_reg>;
 
-			dsi@a0351000 {
+			dsi-controller@a0351000 {
 				vana-supply = <&ab8500_ldo_ana_reg>;
 			};
-			dsi@a0352000 {
+			dsi-controller@a0352000 {
 				vana-supply = <&ab8500_ldo_ana_reg>;
 			};
-			dsi@a0353000 {
+			dsi-controller@a0353000 {
 				vana-supply = <&ab8500_ldo_ana_reg>;
 			};
 		};
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 6671f74..3e10da3 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -1097,7 +1097,7 @@ mcde@a0350000 {
 			ranges;
 			status = "disabled";
 
-			dsi0: dsi@a0351000 {
+			dsi0: dsi-controller@a0351000 {
 				compatible = "ste,mcde-dsi";
 				reg = <0xa0351000 0x1000>;
 				clocks = <&prcmu_clk PRCMU_DSI0CLK>, <&prcmu_clk PRCMU_DSI0ESCCLK>;
@@ -1105,7 +1105,7 @@ dsi0: dsi@a0351000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 			};
-			dsi1: dsi@a0352000 {
+			dsi1: dsi-controller@a0352000 {
 				compatible = "ste,mcde-dsi";
 				reg = <0xa0352000 0x1000>;
 				clocks = <&prcmu_clk PRCMU_DSI1CLK>, <&prcmu_clk PRCMU_DSI1ESCCLK>;
@@ -1113,7 +1113,7 @@ dsi1: dsi@a0352000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 			};
-			dsi2: dsi@a0353000 {
+			dsi2: dsi-controller@a0353000 {
 				compatible = "ste,mcde-dsi";
 				reg = <0xa0353000 0x1000>;
 				/* This DSI port only has the Low Power / Energy Save clock */
diff --git a/arch/arm/boot/dts/ste-href-stuib.dtsi b/arch/arm/boot/dts/ste-href-stuib.dtsi
index e32d0c36..b8fd8f1 100644
--- a/arch/arm/boot/dts/ste-href-stuib.dtsi
+++ b/arch/arm/boot/dts/ste-href-stuib.dtsi
@@ -199,7 +199,7 @@ stuib_cfg2 {
 		mcde@a0350000 {
 			status = "okay";
 
-			dsi@a0351000 {
+			dsi-controller@a0351000 {
 				panel {
 					compatible = "samsung,s6d16d0";
 					reg = <0>;
diff --git a/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi
index e024520..de82b9d 100644
--- a/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi
+++ b/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi
@@ -66,7 +66,7 @@ lis331dl@1c {
 		mcde@a0350000 {
 			status = "okay";
 
-			dsi@a0351000 {
+			dsi-controller@a0351000 {
 				panel {
 					compatible = "samsung,s6d16d0";
 					reg = <0>;
diff --git a/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi
index cb3677f..9f285c7 100644
--- a/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi
+++ b/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi
@@ -45,7 +45,7 @@ lis3dh@18 {
 		mcde@a0350000 {
 			status = "okay";
 
-			dsi@a0351000 {
+			dsi-controller@a0351000 {
 				panel {
 					compatible = "sony,acx424akp";
 					reg = <0>;
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
new file mode 100644
index 0000000..292ed52
--- /dev/null
+++ b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
@@ -0,0 +1,581 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Devicetree for the Samsung XCover 2 GT-S7710 also known as Skomer.
+ */
+
+/dts-v1/;
+#include "ste-db8500.dtsi"
+#include "ste-ab8505.dtsi"
+#include "ste-dbx5x0-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Samsung XCover 2 (GT-S7710)";
+	compatible = "samsung,skomer", "st-ericsson,u8500";
+
+	chosen {
+		stdout-path = &serial2;
+	};
+
+	/* TI TXS0206 level translator for 2.9 V */
+	sd_level_translator: regulator-gpio {
+		compatible = "regulator-fixed";
+
+		/* GPIO87 EN */
+		gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		regulator-name = "sd-level-translator";
+		regulator-min-microvolt = <2900000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-type = "voltage";
+
+		startup-delay-us = <200>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd_level_translator_default>;
+	};
+
+	/* External LDO MIC5366-3.3YMT for eMMC */
+	ldo_3v3_reg: regulator-gpio-ldo-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "en-3v3-fixed-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <5000>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&emmc_ldo_en_default_mode>;
+	};
+
+	wlan_en: regulator-gpio-wlan-en {
+		compatible = "regulator-fixed";
+		regulator-name = "wl-reg-on";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		startup-delay-us = <200000>;
+		/* GPIO215 WLAN_EN */
+		gpio = <&gpio6 23 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_en_default_mode>;
+	};
+
+	vibrator {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vibrator_default>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default_mode>;
+
+		button-home {
+			linux,code = <KEY_HOME>;
+			label = "HOME";
+			/* GPIO91 */
+			gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
+		};
+		button-volup {
+			linux,code = <KEY_VOLUMEUP>;
+			label = "VOL+";
+			/* GPIO67 */
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+		};
+		button-voldown {
+			linux,code = <KEY_VOLUMEDOWN>;
+			label = "VOL-";
+			/* GPIO92 */
+			gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+		};
+		button-menu {
+			linux,code = <KEY_MENU>;
+			label = "MENU";
+			/* GPIO204 */
+			gpios = <&gpio6 12 GPIO_ACTIVE_LOW>;
+		};
+		button-back {
+			linux,code = <KEY_BACK>;
+			label = "BACK";
+			/* GPIO205 */
+			gpios = <&gpio6 13 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	/*
+	 * FIXME: this is not quite GPIO backlight. This is a
+	 * KTD253 one-wire GPIO-controlled backlight. It can
+	 * work as a GPIO backlight.
+	 */
+	gpio_bl: backlight {
+		compatible = "gpio-backlight";
+		/* GPIO 69 */
+		gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_backlight_default_mode>;
+	};
+
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio4 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio4 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_gpio_0_default>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		/* TODO: this should be used by the NCP6914 Camera power management unit */
+	};
+
+	i2c-gpio-1 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio4 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio4 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_gpio_1_default>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		/* TODO: this should be used by the ALPS HSCDTD008A compass sensor */
+	};
+
+	soc {
+		// External Micro SD slot
+		sdi0_per1@80126000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <100000000>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			/* All direction control is used */
+			st,sig-dir-cmd;
+			st,sig-dir-dat0;
+			st,sig-dir-dat2;
+			st,sig-dir-dat31;
+			st,sig-pin-fbclk;
+			full-pwr-cycle;
+			vmmc-supply = <&ab8500_ldo_aux3_reg>;
+			vqmmc-supply = <&sd_level_translator>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc0_a_1_default>;
+			pinctrl-1 = <&mc0_a_1_sleep>;
+			status = "okay";
+		};
+
+		// WLAN SDIO channel
+		sdi1_per2@80118000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <4>;
+			non-removable;
+			cap-sd-highspeed;
+			vmmc-supply = <&wlan_en>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc1_a_2_default>;
+			pinctrl-1 = <&mc1_a_2_sleep>;
+			status = "okay";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			wifi@1 {
+				compatible = "brcm,bcm4329-fmac";
+				reg = <1>;
+				/* GPIO216 WL_HOST_WAKE */
+				interrupt-parent = <&gpio6>;
+				interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+				interrupt-names = "host-wake";
+				pinctrl-names = "default";
+				pinctrl-0 = <&wlan_default_mode>;
+			};
+		};
+
+		// eMMC
+		sdi2_per3@80005000 {
+			arm,primecell-periphid = <0x10480180>;
+		        max-frequency = <100000000>;
+			bus-width = <8>;
+			non-removable;
+			cap-mmc-highspeed;
+			mmc-ddr-1_8v;
+			vmmc-supply = <&ldo_3v3_reg>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc2_a_1_default>;
+			pinctrl-1 = <&mc2_a_1_sleep>;
+
+			status = "okay";
+		};
+
+		/* GBF (Bluetooth) UART */
+		uart@80120000 {
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u0_a_1_default>;
+			pinctrl-1 = <&u0_a_1_sleep>;
+			status = "okay";
+
+			/* FIXME: not quite working yet, probably needs regulators */
+			bluetooth {
+				compatible = "brcm,bcm4330-bt";
+				shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
+				device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+				host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&bluetooth_default_mode>;
+			};
+		};
+
+		/* GPF UART */
+		uart@80121000 {
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u1rxtx_a_1_default &u1ctsrts_a_1_default>;
+			pinctrl-1 = <&u1rxtx_a_1_sleep &u1ctsrts_a_1_sleep>;
+		};
+
+		/* Debugging console UART connected to AB8505 USB */
+		uart@80007000 {
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u2rxtx_c_1_default>;
+			pinctrl-1 = <&u2rxtx_c_1_sleep>;
+		};
+
+		prcmu@80157000 {
+			ab8505 {
+				ab8500_usb {
+					pinctrl-names = "default", "sleep";
+					pinctrl-0 = <&usb_a_1_default>;
+					pinctrl-1 = <&usb_a_1_sleep>;
+				};
+
+				ab8505-regulators {
+					ab8500_ldo_aux1 {
+						/* Used for VDD for sensors */
+						regulator-name = "AUX1";
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux2 {
+						/* Supplies the Cypress TMA140 touchscreen only with 3.3V */
+						regulator-name = "AUX2";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux3 {
+						/* Used for voltage for external MMC/SD card */
+						regulator-name = "AUX3";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux4 {
+						regulator-name = "AUX4";
+						/* Hammer to 3.0V for the display */
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3000000>;
+					};
+
+					ab8500_ldo_aux5 {
+						regulator-name = "AUX5";
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <2790000>;
+						regulator-always-on;
+					};
+
+					ab8500_ldo_aux6 {
+						regulator-name = "AUX6";
+						/* Hammer to 1.8V for the display */
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					ab8500_ldo_aux8 {
+						/* Mostly VIO for sensors */
+						regulator-name = "AUX8";
+					};
+				};
+			};
+		};
+
+		/* I2C0 */
+		i2c@80004000 {
+			status = "okay";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c0_a_1_default>;
+			pinctrl-1 = <&i2c0_a_1_sleep>;
+
+			proximity@44 {
+				compatible = "sharp,gp2ap002s00f";
+				clock-frequency = <400000>;
+				reg = <0x44>;
+
+				interrupt-parent = <&gpio4>;
+				interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vio-supply = <&ab8500_ldo_aux8_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&gp2ap002_skomer_default>;
+				sharp,proximity-far-hysteresis = /bits/ 8 <0x2f>;
+				sharp,proximity-close-hysteresis = /bits/ 8 <0x0f>;
+			};
+		};
+
+
+		/* I2C2 */
+		i2c@80128000 {
+			status = "okay";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c2_b_2_default>;
+			pinctrl-1 = <&i2c2_b_2_sleep>;
+
+			accel@18 {
+				compatible = "bosch,bma254";
+				clock-frequency = <400000>;
+				reg = <0x18>;
+
+				/* GPIO224 used as "smart alert" interrupt */
+				interrupt-parent = <&gpio7>;
+				interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+
+				mount-matrix = "0", "1", "0",
+					       "-1", "0", "0",
+					       "0", "0", "1";
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&ab8500_ldo_aux8_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&bma254_skomer_default>;
+			};
+		};
+
+		/* I2C3 */
+		i2c@80110000 {
+			status = "okay";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c3_c_2_default>;
+			pinctrl-1 = <&i2c3_c_2_sleep>;
+
+			/* TODO: this should be used by the Cypress TMA140 touchscreen */
+		};
+
+		mcde@a0350000 {
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&dsi_default_mode>;
+
+			dsi-controller@a0351000 {
+				panel {
+					/* NT35510-based Hydis HVA40WV1 */
+					compatible = "hydis,hva40wv1", "novatek,nt35510";
+					reg = <0>;
+					/* v_lcd_3v0 2.3-4.8V */
+					vdd-supply = <&ab8500_ldo_aux4_reg>;
+					/* v_lcd_1v8 1.65-3.3V */
+					vddi-supply = <&ab8500_ldo_aux6_reg>;
+					/* GPIO 139 */
+					reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&display_default_mode>;
+					backlight = <&gpio_bl>;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl {
+	/*
+	 * This extends the MC0 default config to include DAT32DIR
+	 * which is used by this machine. If we don't do this the
+	 * SD card does not work.
+	 */
+	sdi0 {
+		mc0_a_1_default {
+			default_mux {
+				function = "mc0";
+				/* This machine uses the DAT31 pin */
+				groups = "mc0_a_1", "mc0dat31dir_a_1";
+			};
+			default_cfg5 {
+				pins = "GPIO21_AB3"; /* DAT31DIR */
+				ste,config = <&out_hi>;
+			};
+		};
+	};
+
+	mcde {
+		dsi_default_mode: dsi_default {
+			default_mux1 {
+				/* Mux in VSI0 used for DSI TE */
+				function = "lcd";
+				groups = "lcdvsi0_a_1"; /* VSI0 for LCD */
+			};
+			default_cfg1 {
+				pins = "GPIO68_E1"; /* VSI0 */
+				ste,config = <&in_nopull>;
+			};
+		};
+	};
+
+	/* Two GPIO lines used by the display */
+	display {
+		display_default_mode: display_default {
+			skomer_cfg1 {
+				/*
+				 * OLED DETECT or check_pba, this appears to be high
+				 * on "PBA" which I guess is "prototype board A".
+				 */
+				pins = "GPIO93_B7";
+				ste,config = <&gpio_in_nopull>;
+			};
+			skomer_cfg2 {
+				pins = "GPIO139_C9";
+				/*
+				 * MIPI_DSI0_RESET_N resets the display, leave high
+				 * (de-asserted) so we only assert reset explicitly
+				 * from the display driver.
+				 */
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	backlight {
+		gpio_backlight_default_mode: backlight_default {
+			skomer_cfg1 {
+				pins = "GPIO69_E2"; /* LCD_BL_CTRL */
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	/* GPIO that enables the 2.9V SD card level translator */
+	sd-level-translator {
+		sd_level_translator_default: sd_level_translator_default {
+			/* level shifter on GPIO87 */
+			skomer_cfg1 {
+				pins = "GPIO87_B3";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	/* GPIO that enables the LDO regulator for the eMMC */
+	emmc-ldo {
+		emmc_ldo_en_default_mode: emmc_ldo_default {
+			/* LDO enable on GPIO223 */
+			skomer_cfg1 {
+				pins = "GPIO223_AH9";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	/* GPIO keys */
+	gpio-keys {
+		gpio_keys_default_mode: gpio_keys_default {
+			skomer_cfg1 {
+				pins = "GPIO67_G2", /* VOL UP */
+				       "GPIO91_B6", /* HOME */
+				       "GPIO92_D6", /* VOL DOWN */
+				       "GPIO204_AF23", /* MENU */
+				       "GPIO205_AG23"; /* BACK */
+					ste,config = <&gpio_in_pu>;
+			};
+		};
+	};
+	/* Interrupt line for BMA254 */
+	bma254 {
+		bma254_skomer_default: bma254_skomer {
+			skomer_cfg1 {
+				pins = "GPIO224_AG9";
+				ste,config = <&gpio_in_pd>;
+			};
+		};
+	};
+	/* Interrupt line for light/proximity sensor GP2AP002 */
+	gp2ap002 {
+		gp2ap002_skomer_default: gp2ap002_skomer {
+			skomer_cfg1 {
+				pins = "GPIO146_D13";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	/* GPIO-based I2C bus for NCP6914 */
+	i2c-gpio-0 {
+		i2c_gpio_0_default: i2c_gpio_0 {
+			skomer_cfg1 {
+				pins = "GPIO143_D12", "GPIO144_B13";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	/* GPIO-based I2C bus for ALPS HSCD compass */
+	i2c-gpio-1 {
+		i2c_gpio_1_default: i2c_gpio_1 {
+			skomer_cfg1 {
+				pins = "GPIO151_B17", "GPIO152_D16";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	wlan {
+		wlan_default_mode: wlan_default {
+			skomer_cfg1 {
+				pins = "GPIO216_AG12";
+				ste,config = <&gpio_in_pd>;
+			};
+		};
+		wlan_en_default_mode: wlan_en_default {
+			skomer_cfg2 {
+				pins = "GPIO215_AH13";
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	bluetooth {
+		bluetooth_default_mode: bluetooth_default {
+			skomer_cfg1 {
+				pins = "GPIO199_AH23", "GPIO222_AJ9";
+				ste,config = <&gpio_out_lo>;
+			};
+			skomer_cfg2 {
+				pins = "GPIO97_D9";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	vibrator {
+		vibrator_default: vibrator_default {
+			skomer_cfg1 {
+				pins = "GPIO195_AG28";	/* MOT_EN */
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+};
+
+&ab8505_gpio {
+	/* Hog a few default settings */
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio_default>;
+
+	gpio {
+		gpio_default: gpio_default {
+			skomer_mux {
+				/* Change unused pins to GPIO mode */
+				function = "gpio";
+				groups = "gpio3_a_1",	/* default: SysClkReq4 */
+					 "gpio14_a_1";	/* default: PWMOut1 */
+			};
+			skomer_cfg1 {
+				pins = "GPIO11_B17", "GPIO13_D17", "GPIO50_L4";
+				bias-disable;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stm32746g-eval.dts b/arch/arm/boot/dts/stm32746g-eval.dts
index fcc804e..4ea3f98 100644
--- a/arch/arm/boot/dts/stm32746g-eval.dts
+++ b/arch/arm/boot/dts/stm32746g-eval.dts
@@ -165,7 +165,7 @@ stmfx: stmfx@42 {
 		interrupts = <8 IRQ_TYPE_EDGE_RISING>;
 		interrupt-parent = <&gpioi>;
 
-		stmfx_pinctrl: stmfx-pin-controller {
+		stmfx_pinctrl: pinctrl {
 			compatible = "st,stmfx-0300-pinctrl";
 			gpio-controller;
 			#gpio-cells = <2>;
diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
index 0237d4d..73c07f0 100644
--- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
@@ -162,6 +162,40 @@ pins1 {
 		};
 	};
 
+	ethernet0_rmii_pins_a: rmii-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH1_RMII_TXD0 */
+				 <STM32_PINMUX('G', 14, AF11)>, /* ETH1_RMII_TXD1 */
+				 <STM32_PINMUX('B', 11, AF11)>, /* ETH1_RMII_TX_EN */
+				 <STM32_PINMUX('A', 1, AF0)>,   /* ETH1_RMII_REF_CLK */
+				 <STM32_PINMUX('A', 2, AF11)>,  /* ETH1_MDIO */
+				 <STM32_PINMUX('C', 1, AF11)>;  /* ETH1_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 4, AF11)>,  /* ETH1_RMII_RXD0 */
+				 <STM32_PINMUX('C', 5, AF11)>,  /* ETH1_RMII_RXD1 */
+				 <STM32_PINMUX('A', 7, AF11)>;  /* ETH1_RMII_CRS_DV */
+			bias-disable;
+		};
+	};
+
+	ethernet0_rmii_pins_sleep_a: rmii-sleep-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 13, ANALOG)>, /* ETH1_RMII_TXD0 */
+				 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH1_RMII_TXD1 */
+				 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */
+				 <STM32_PINMUX('A', 2, ANALOG)>,  /* ETH1_MDIO */
+				 <STM32_PINMUX('C', 1, ANALOG)>,  /* ETH1_MDC */
+				 <STM32_PINMUX('C', 4, ANALOG)>,  /* ETH1_RMII_RXD0 */
+				 <STM32_PINMUX('C', 5, ANALOG)>,  /* ETH1_RMII_RXD1 */
+				 <STM32_PINMUX('A', 1, ANALOG)>,  /* ETH1_RMII_REF_CLK */
+				 <STM32_PINMUX('A', 7, ANALOG)>;  /* ETH1_RMII_CRS_DV */
+		};
+	};
+
 	fmc_pins_a: fmc-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */
@@ -685,6 +719,26 @@ pins {
 		};
 	};
 
+
+	sai2a_pins_b: sai2a-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('I', 6, AF10)>,	/* SAI2_SD_A */
+				 <STM32_PINMUX('I', 7, AF10)>,	/* SAI2_FS_A */
+				 <STM32_PINMUX('D', 13, AF10)>;	/* SAI2_SCK_A */
+			slew-rate = <0>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	sai2a_sleep_pins_b: sai2a-sleep-3 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 6, ANALOG)>,  /* SAI2_SD_A */
+				 <STM32_PINMUX('I', 7, ANALOG)>,  /* SAI2_FS_A */
+				 <STM32_PINMUX('D', 13, ANALOG)>; /* SAI2_SCK_A */
+		};
+	};
+
 	sai2b_pins_a: sai2b-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('E', 12, AF10)>, /* SAI2_SCK_B */
@@ -1000,6 +1054,19 @@ pins {
 		};
 	};
 
+	usart3_pins_a: usart3-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 10, AF7)>; /* USART3_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
+			bias-disable;
+		};
+	};
+
 	uart4_pins_a: uart4-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
@@ -1040,6 +1107,32 @@ pins2 {
 			bias-disable;
 		};
 	};
+
+	uart8_pins_a: uart8-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 0, AF8)>; /* UART8_RX */
+			bias-disable;
+		};
+	};
+
+	usbotg_hs_pins_a: usbotg-hs-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 10, ANALOG)>; /* OTG_ID */
+		};
+	};
+
+	usbotg_fs_dp_dm_pins_a: usbotg-fs-dp-dm-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* OTG_FS_DM */
+				 <STM32_PINMUX('A', 12, ANALOG)>; /* OTG_FS_DP */
+		};
+	};
 };
 
 &pinctrl_z {
diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
index fb41d07..3ea05ba 100644
--- a/arch/arm/boot/dts/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/stm32mp151.dtsi
@@ -17,6 +17,7 @@ cpus {
 
 		cpu0: cpu@0 {
 			compatible = "arm,cortex-a7";
+			clock-frequency = <650000000>;
 			device_type = "cpu";
 			reg = <0>;
 		};
@@ -483,6 +484,7 @@ i2c1: i2c@40012000 {
 			resets = <&rcc I2C1_R>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			wakeup-source;
 			status = "disabled";
 		};
 
@@ -496,6 +498,7 @@ i2c2: i2c@40013000 {
 			resets = <&rcc I2C2_R>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			wakeup-source;
 			status = "disabled";
 		};
 
@@ -509,6 +512,7 @@ i2c3: i2c@40014000 {
 			resets = <&rcc I2C3_R>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			wakeup-source;
 			status = "disabled";
 		};
 
@@ -522,6 +526,7 @@ i2c5: i2c@40015000 {
 			resets = <&rcc I2C5_R>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			wakeup-source;
 			status = "disabled";
 		};
 
@@ -959,6 +964,7 @@ dma1: dma-controller@48000000 {
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rcc DMA1>;
+			resets = <&rcc DMA1_R>;
 			#dma-cells = <4>;
 			st,mem2mem;
 			dma-requests = <8>;
@@ -976,6 +982,7 @@ dma2: dma-controller@48001000 {
 				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rcc DMA2>;
+			resets = <&rcc DMA2_R>;
 			#dma-cells = <4>;
 			st,mem2mem;
 			dma-requests = <8>;
@@ -989,6 +996,7 @@ dmamux1: dma-router@48002000 {
 			dma-masters = <&dma1 &dma2>;
 			dma-channels = <16>;
 			clocks = <&rcc DMAMUX>;
+			resets = <&rcc DMAMUX_R>;
 		};
 
 		adc: adc@48003000 {
@@ -1044,7 +1052,7 @@ sdmmc3: sdmmc@48004000 {
 		};
 
 		usbotg_hs: usb-otg@49000000 {
-			compatible = "snps,dwc2";
+			compatible = "st,stm32mp15-hsotg", "snps,dwc2";
 			reg = <0x49000000 0x10000>;
 			clocks = <&rcc USBO_K>;
 			clock-names = "otg";
@@ -1055,6 +1063,7 @@ usbotg_hs: usb-otg@49000000 {
 			g-np-tx-fifo-size = <32>;
 			g-tx-fifo-size = <128 128 64 64 64 64 32 32>;
 			dr_mode = "otg";
+			usb33d-supply = <&usb33>;
 			status = "disabled";
 		};
 
@@ -1280,6 +1289,7 @@ mdma1: dma-controller@58000000 {
 			reg = <0x58000000 0x1000>;
 			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rcc MDMA>;
+			resets = <&rcc MDMA_R>;
 			#dma-cells = <5>;
 			dma-channels = <32>;
 			dma-requests = <48>;
@@ -1369,10 +1379,12 @@ ethernet0: ethernet@5800a000 {
 			clock-names = "stmmaceth",
 				      "mac-clk-tx",
 				      "mac-clk-rx",
+				      "eth-ck",
 				      "ethstp";
 			clocks = <&rcc ETHMAC>,
 				 <&rcc ETHTX>,
 				 <&rcc ETHRX>,
+				 <&rcc ETHCK_K>,
 				 <&rcc ETHSTP>;
 			st,syscon = <&syscfg 0x4>;
 			snps,mixed-burst;
@@ -1473,6 +1485,7 @@ i2c4: i2c@5c002000 {
 			resets = <&rcc I2C4_R>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			wakeup-source;
 			status = "disabled";
 		};
 
@@ -1508,6 +1521,7 @@ i2c6: i2c@5c009000 {
 			resets = <&rcc I2C6_R>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			wakeup-source;
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/stm32mp153.dtsi b/arch/arm/boot/dts/stm32mp153.dtsi
index 2d759fc..6d9ab08 100644
--- a/arch/arm/boot/dts/stm32mp153.dtsi
+++ b/arch/arm/boot/dts/stm32mp153.dtsi
@@ -10,6 +10,7 @@ / {
 	cpus {
 		cpu1: cpu@1 {
 			compatible = "arm,cortex-a7";
+			clock-frequency = <650000000>;
 			device_type = "cpu";
 			reg = <1>;
 		};
diff --git a/arch/arm/boot/dts/stm32mp157a-avenger96.dts b/arch/arm/boot/dts/stm32mp157a-avenger96.dts
index cbfa407..425175f 100644
--- a/arch/arm/boot/dts/stm32mp157a-avenger96.dts
+++ b/arch/arm/boot/dts/stm32mp157a-avenger96.dts
@@ -135,10 +135,6 @@ pmic: stpmic@33 {
 		#interrupt-cells = <2>;
 		status = "okay";
 
-		st,main-control-register = <0x04>;
-		st,vin-control-register = <0xc0>;
-		st,usb-control-register = <0x30>;
-
 		regulators {
 			compatible = "st,stpmic1-regulators";
 
@@ -173,7 +169,6 @@ vdd: buck3 {
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
-				st,mask_reset;
 				regulator-initial-mode = <0>;
 				regulator-over-current-protection;
 			};
@@ -213,8 +208,6 @@ vtt_ddr: ldo3 {
 
 			vdd_usb: ldo4 {
 				regulator-name = "vdd_usb";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
 				interrupts = <IT_CURLIM_LDO4 0>;
 				interrupt-parent = <&pmic>;
 			};
@@ -240,7 +233,6 @@ v1v8: ldo6 {
 			vref_ddr: vref_ddr {
 				regulator-name = "vref_ddr";
 				regulator-always-on;
-				regulator-over-current-protection;
 			};
 
 			bst_out: boost {
@@ -300,7 +292,8 @@ &sdmmc1 {
 	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
 	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
 	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
-	broken-cd;
+	cd-gpios = <&gpioi 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	disable-wp;
 	st,sig-dir;
 	st,neg-edge;
 	st,use-ckin;
diff --git a/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts b/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts
new file mode 100644
index 0000000..af99e13
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts
@@ -0,0 +1,265 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2019 Marek Vasut <marex@denx.de>
+ */
+
+#include "stm32mp157c-dhcom-som.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "STMicroelectronics STM32MP157C DHCOM Premium Developer Kit (2)";
+	compatible = "dh,stm32mp157c-dhcom-pdk2", "st,stm32mp157";
+
+	aliases {
+		serial0 = &uart4;
+		serial1 = &usart3;
+		serial2 = &uart8;
+		ethernet0 = &ethernet0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clk_ext_audio_codec: clock-codec {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	display_bl: display-bl {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>;
+		default-brightness-level = <8>;
+		enable-gpios = <&gpioi 0 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	ethernet_vio: vioregulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vio";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpiog 3 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	panel {
+		compatible = "edt,etm0700g0edh6";
+		backlight = <&display_bl>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "audio-graph-card";
+		routing =
+			"MIC_IN", "Capture",
+			"Capture", "Mic Bias",
+			"Playback", "HP_OUT";
+		dais = <&sai2a_port &sai2b_port>;
+		status = "okay";
+	};
+};
+
+&cec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cec_pins_a>;
+	status = "okay";
+};
+
+&ethernet0 {
+	status = "okay";
+	pinctrl-0 = <&ethernet0_rmii_pins_a>;
+	pinctrl-1 = <&ethernet0_rmii_pins_sleep_a>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rmii";
+	max-speed = <100>;
+	phy-handle = <&phy0>;
+	st,eth-ref-clk-sel;
+	phy-reset-gpios = <&gpioh 15 GPIO_ACTIVE_LOW>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+};
+
+&i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clk_ext_audio_codec>;
+		VDDA-supply = <&v3v3>;
+		VDDIO-supply = <&vdd>;
+
+		sgtl5000_port: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			sgtl5000_tx_endpoint: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&sai2a_endpoint>;
+				frame-master;
+				bitclock-master;
+			};
+
+			sgtl5000_rx_endpoint: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&sai2b_endpoint>;
+				frame-master;
+				bitclock-master;
+			};
+		};
+
+	};
+
+	polytouch@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&gpiog>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
+		linux,wakeup;
+	};
+};
+
+&ltdc {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&ltdc_pins_b>;
+	pinctrl-1 = <&ltdc_pins_sleep_b>;
+	status = "okay";
+
+	port {
+		lcd_display_out: endpoint {
+			remote-endpoint = <&lcd_panel_in>;
+		};
+	};
+};
+
+&m_can1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&m_can1_pins_a>;
+	pinctrl-1 = <&m_can1_sleep_pins_a>;
+	status = "okay";
+};
+
+&sai2 {
+	clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
+	clock-names = "pclk", "x8k", "x11k";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sai2a_pins_b &sai2b_pins_b>;
+	pinctrl-1 = <&sai2a_sleep_pins_b &sai2b_sleep_pins_b>;
+	status = "okay";
+
+	sai2a: audio-controller@4400b004 {
+		#clock-cells = <0>;
+		dma-names = "tx";
+		clocks = <&rcc SAI2_K>;
+		clock-names = "sai_ck";
+		status = "okay";
+
+		sai2a_port: port {
+			sai2a_endpoint: endpoint {
+				remote-endpoint = <&sgtl5000_tx_endpoint>;
+				format = "i2s";
+				mclk-fs = <512>;
+				dai-tdm-slot-num = <2>;
+				dai-tdm-slot-width = <16>;
+			};
+		};
+	};
+
+	sai2b: audio-controller@4400b024 {
+		dma-names = "rx";
+		st,sync = <&sai2a 2>;
+		clocks = <&rcc SAI2_K>, <&sai2a>;
+		clock-names = "sai_ck", "MCLK";
+		status = "okay";
+
+		sai2b_port: port {
+			sai2b_endpoint: endpoint {
+				remote-endpoint = <&sgtl5000_rx_endpoint>;
+				format = "i2s";
+				mclk-fs = <512>;
+				dai-tdm-slot-num = <2>;
+				dai-tdm-slot-width = <16>;
+			};
+		};
+	};
+};
+
+&timers2 {
+	/* spare dmas for other usage (un-delete to enable pwm capture) */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+	pwm2: pwm {
+		pinctrl-0 = <&pwm2_pins_a>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+	timer@1 {
+		status = "okay";
+	};
+};
+
+&usart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usart3_pins_a>;
+	status = "okay";
+};
+
+&uart8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart8_pins_a>;
+	status = "okay";
+};
+
+&usbh_ehci {
+	phys = <&usbphyc_port0>;
+	status = "okay";
+};
+
+&usbotg_hs {
+	dr_mode = "peripheral";
+	phys = <&usbphyc_port1 0>;
+	phy-names = "usb2-phy";
+	status = "okay";
+};
+
+&usbphyc {
+	status = "okay";
+};
+
+&usbphyc_port0 {
+	phy-supply = <&vdd_usb>;
+	vdda1v1-supply = <&reg11>;
+	vdda1v8-supply = <&reg18>;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&vdd_usb>;
+	vdda1v1-supply = <&reg11>;
+	vdda1v8-supply = <&reg18>;
+};
diff --git a/arch/arm/boot/dts/stm32mp157c-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp157c-dhcom-som.dtsi
new file mode 100644
index 0000000..f81dc31
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-dhcom-som.dtsi
@@ -0,0 +1,368 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) 2019 Marek Vasut <marex@denx.de>
+ */
+/dts-v1/;
+
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxaa-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/st,stpmic1.h>
+
+/ {
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xC0000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mcuram2: mcuram2@10000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10000000 0x40000>;
+			no-map;
+		};
+
+		vdev0vring0: vdev0vring0@10040000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10040000 0x1000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@10041000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10041000 0x1000>;
+			no-map;
+		};
+
+		vdev0buffer: vdev0buffer@10042000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10042000 0x4000>;
+			no-map;
+		};
+
+		mcuram: mcuram@30000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x30000000 0x40000>;
+			no-map;
+		};
+
+		retram: retram@38000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x38000000 0x10000>;
+			no-map;
+		};
+	};
+};
+
+&adc {
+	vdd-supply = <&vdd>;
+	vdda-supply = <&vdda>;
+	vref-supply = <&vdda>;
+	status = "okay";
+
+	adc1: adc@0 {
+		st,min-sample-time-nsecs = <5000>;
+		st,adc-channels = <0>;
+		status = "okay";
+	};
+
+	adc2: adc@100 {
+		st,adc-channels = <1>;
+		st,min-sample-time-nsecs = <5000>;
+		status = "okay";
+	};
+};
+
+&dac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>;
+	vref-supply = <&vdda>;
+	status = "okay";
+
+	dac1: dac@1 {
+		status = "okay";
+	};
+	dac2: dac@2 {
+		status = "okay";
+	};
+};
+
+&dts {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	rtc@32 {
+		compatible = "microcrystal,rv8803";
+		reg = <0x32>;
+	};
+
+	pmic: stpmic@33 {
+		compatible = "st,stpmic1";
+		reg = <0x33>;
+		interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		status = "okay";
+
+		regulators {
+			compatible = "st,stpmic1-regulators";
+			ldo1-supply = <&v3v3>;
+			ldo2-supply = <&v3v3>;
+			ldo3-supply = <&vdd_ddr>;
+			ldo5-supply = <&v3v3>;
+			ldo6-supply = <&v3v3>;
+			pwr_sw1-supply = <&bst_out>;
+			pwr_sw2-supply = <&bst_out>;
+
+			vddcore: buck1 {
+				regulator-name = "vddcore";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd_ddr: buck2 {
+				regulator-name = "vdd_ddr";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd: buck3 {
+				regulator-name = "vdd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				st,mask-reset;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			v3v3: buck4 {
+				regulator-name = "v3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+				regulator-initial-mode = <0>;
+			};
+
+			vdda: ldo1 {
+				regulator-name = "vdda";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				interrupts = <IT_CURLIM_LDO1 0>;
+			};
+
+			v2v8: ldo2 {
+				regulator-name = "v2v8";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				interrupts = <IT_CURLIM_LDO2 0>;
+			};
+
+			vtt_ddr: ldo3 {
+				regulator-name = "vtt_ddr";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <750000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			vdd_usb: ldo4 {
+				regulator-name = "vdd_usb";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				interrupts = <IT_CURLIM_LDO4 0>;
+			};
+
+			vdd_sd: ldo5 {
+				regulator-name = "vdd_sd";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				interrupts = <IT_CURLIM_LDO5 0>;
+				regulator-boot-on;
+			};
+
+			v1v8: ldo6 {
+				regulator-name = "v1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				interrupts = <IT_CURLIM_LDO6 0>;
+			};
+
+			vref_ddr: vref_ddr {
+				regulator-name = "vref_ddr";
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			bst_out: boost {
+				regulator-name = "bst_out";
+				interrupts = <IT_OCP_BOOST 0>;
+			};
+
+			vbus_otg: pwr_sw1 {
+				regulator-name = "vbus_otg";
+				interrupts = <IT_OCP_OTG 0>;
+			};
+
+			vbus_sw: pwr_sw2 {
+				regulator-name = "vbus_sw";
+				interrupts = <IT_OCP_SWOUT 0>;
+				regulator-active-discharge;
+			};
+		};
+
+		onkey {
+			compatible = "st,stpmic1-onkey";
+			interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
+			interrupt-names = "onkey-falling", "onkey-rising";
+			power-off-time-sec = <10>;
+			status = "okay";
+		};
+
+		watchdog {
+			compatible = "st,stpmic1-wdt";
+			status = "disabled";
+		};
+	};
+
+	touchscreen@49 {
+		compatible = "ti,tsc2004";
+		reg = <0x49>;
+		vio-supply = <&v3v3>;
+		interrupts-extended = <&gpioh 3 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&ipcc {
+	status = "okay";
+};
+
+&iwdg2 {
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+&m4_rproc {
+	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
+			<&vdev0vring1>, <&vdev0buffer>;
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
+	mbox-names = "vq0", "vq1", "shutdown";
+	interrupt-parent = <&exti>;
+	interrupts = <68 1>;
+	status = "okay";
+};
+
+&pwr_regulators {
+	vdd-supply = <&vdd>;
+	vdd_3v3_usbfs-supply = <&vdd_usb>;
+};
+
+&qspi {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a &qspi_bk2_sleep_pins_a>;
+	reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash0: mx66l51235l@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <108000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&rng1 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>;
+	broken-cd;
+	st,sig-dir;
+	st,neg-edge;
+	st,use-ckin;
+	bus-width = <4>;
+	vmmc-supply = <&vdd_sd>;
+	status = "okay";
+};
+
+&sdmmc2 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	st,neg-edge;
+	bus-width = <8>;
+	vmmc-supply = <&v3v3>;
+	vqmmc-supply = <&v3v3>;
+	mmc-ddr-3_3v;
+	status = "okay";
+};
+
+&sdmmc3 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc3_b4_pins_a>;
+	pinctrl-1 = <&sdmmc3_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>;
+	broken-cd;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&v3v3>;
+	vqmmc-supply = <&v3v3>;
+	mmc-ddr-3_3v;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts
index 1fc4325..9d2592d 100644
--- a/arch/arm/boot/dts/stm32mp157c-ed1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts
@@ -130,10 +130,12 @@ &gpu {
 };
 
 &i2c4 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&i2c4_pins_a>;
+	pinctrl-1 = <&i2c4_pins_sleep_a>;
 	i2c-scl-rising-time-ns = <185>;
 	i2c-scl-falling-time-ns = <20>;
+	clock-frequency = <400000>;
 	status = "okay";
 	/* spare dmas for other usage */
 	/delete-property/dmas;
@@ -218,8 +220,6 @@ vtt_ddr: ldo3 {
 
 			vdd_usb: ldo4 {
 				regulator-name = "vdd_usb";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
 				interrupts = <IT_CURLIM_LDO4 0>;
 			};
 
@@ -241,7 +241,6 @@ v1v8: ldo6 {
 			vref_ddr: vref_ddr {
 				regulator-name = "vref_ddr";
 				regulator-always-on;
-				regulator-over-current-protection;
 			};
 
 			bst_out: boost {
@@ -313,7 +312,8 @@ &sdmmc1 {
 	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
 	pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>;
 	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>;
-	broken-cd;
+	cd-gpios = <&gpiog 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	disable-wp;
 	st,sig-dir;
 	st,neg-edge;
 	st,use-ckin;
@@ -334,7 +334,7 @@ &sdmmc2 {
 	st,neg-edge;
 	bus-width = <8>;
 	vmmc-supply = <&v3v3>;
-	vqmmc-supply = <&v3v3>;
+	vqmmc-supply = <&vdd>;
 	mmc-ddr-3_3v;
 	status = "okay";
 };
@@ -355,6 +355,10 @@ &uart4 {
 	status = "okay";
 };
 
+&usbotg_hs {
+	vbus-supply = <&vbus_otg>;
+};
+
 &usbphyc_port0 {
 	phy-supply = <&vdd_usb>;
 	vdda1v1-supply = <&reg11>;
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index 228e35e..8a4c7ff 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -174,8 +174,9 @@ nand@0 {
 };
 
 &i2c2 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&i2c2_pins_a>;
+	pinctrl-1 = <&i2c2_pins_sleep_a>;
 	i2c-scl-rising-time-ns = <185>;
 	i2c-scl-falling-time-ns = <20>;
 	status = "okay";
@@ -210,7 +211,7 @@ stmfx: stmfx@42 {
 		interrupt-parent = <&gpioi>;
 		vdd-supply = <&v3v3>;
 
-		stmfx_pinctrl: stmfx-pin-controller {
+		stmfx_pinctrl: pinctrl {
 			compatible = "st,stmfx-0300-pinctrl";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -218,7 +219,7 @@ stmfx_pinctrl: stmfx-pin-controller {
 			#interrupt-cells = <2>;
 			gpio-ranges = <&stmfx_pinctrl 0 0 24>;
 
-			joystick_pins: joystick {
+			joystick_pins: joystick-pins {
 				pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4";
 				bias-pull-down;
 			};
@@ -227,8 +228,9 @@ joystick_pins: joystick {
 };
 
 &i2c5 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&i2c5_pins_a>;
+	pinctrl-1 = <&i2c5_pins_sleep_a>;
 	i2c-scl-rising-time-ns = <185>;
 	i2c-scl-falling-time-ns = <20>;
 	status = "okay";
@@ -353,7 +355,8 @@ &usbh_ehci {
 };
 
 &usbotg_hs {
-	dr_mode = "peripheral";
+	pinctrl-0 = <&usbotg_hs_pins_a>;
+	pinctrl-names = "default";
 	phys = <&usbphyc_port1 0>;
 	phy-names = "usb2-phy";
 	status = "okay";
diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
index f6672e8..d946e0a 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
@@ -216,10 +216,12 @@ cs42l51_rx_endpoint: endpoint@1 {
 };
 
 &i2c4 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&i2c4_pins_a>;
+	pinctrl-1 = <&i2c4_pins_sleep_a>;
 	i2c-scl-rising-time-ns = <185>;
 	i2c-scl-falling-time-ns = <20>;
+	clock-frequency = <400000>;
 	status = "okay";
 	/* spare dmas for other usage */
 	/delete-property/dmas;
@@ -304,8 +306,6 @@ vtt_ddr: ldo3 {
 
 			vdd_usb: ldo4 {
 				regulator-name = "vdd_usb";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
 				interrupts = <IT_CURLIM_LDO4 0>;
 			};
 
@@ -328,7 +328,6 @@ v1v2_hdmi: ldo6 {
 			vref_ddr: vref_ddr {
 				regulator-name = "vref_ddr";
 				regulator-always-on;
-				regulator-over-current-protection;
 			};
 
 			 bst_out: boost {
@@ -479,7 +478,8 @@ &sdmmc1 {
 	pinctrl-0 = <&sdmmc1_b4_pins_a>;
 	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
 	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
-	broken-cd;
+	cd-gpios = <&gpiob 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	disable-wp;
 	st,neg-edge;
 	bus-width = <4>;
 	vmmc-supply = <&v3v3>;
diff --git a/arch/arm/boot/dts/sun5i-a13-pocketbook-touch-lux-3.dts b/arch/arm/boot/dts/sun5i-a13-pocketbook-touch-lux-3.dts
new file mode 100644
index 0000000..e9ef97c
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-a13-pocketbook-touch-lux-3.dts
@@ -0,0 +1,257 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright 2019 Ondrej Jirman <megous@megous.com>
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "PocketBook Touch Lux 3";
+	compatible = "pocketbook,touch-lux-3", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		enable-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power {
+			gpios = <&pio 4 8 GPIO_ACTIVE_LOW>; /* PE8 */
+			default-state = "on";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		label = "GPIO Keys";
+
+		key-right {
+			label = "Right";
+			linux,code = <KEY_RIGHT>;
+			gpios = <&pio 6 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PG9 */
+		};
+
+		key-left {
+			label = "Left";
+			linux,code = <KEY_LEFT>;
+			gpios = <&pio 6 10 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PG10 */
+		};
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-1v8-nor-ctp";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&pio 2 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_1v8_nor: regulator-nor {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-nor";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&pio 2 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_1v8>;
+		regulator-always-on;
+	};
+
+	reg_1v8_ctp: regulator-ctp {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-ctp";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&pio 2 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_1v8>;
+	};
+
+	reg_3v3_mmc0: regulator-mmc0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-mmc0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 4 4 GPIO_ACTIVE_LOW>; /* PE4 */
+		vin-supply = <&reg_vcc3v3>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	status = "okay";
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* Touchpanel is connected here. */
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-200 {
+		label = "Home";
+		linux,code = <KEY_HOME>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-400 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_3v3_mmc0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_4bit_pc_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+	/* We need this otherwise the LDO3 would overload */
+	regulator-soft-start;
+	regulator-ramp-delay = <1600>;
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pe_pins>, <&spi2_cs0_pe_pin>;
+	status = "okay";
+
+	epd_flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "macronix,mx25u4033", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <4000000>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_ldo3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi
index 0b526e6e..e6b0367 100644
--- a/arch/arm/boot/dts/sun5i.dtsi
+++ b/arch/arm/boot/dts/sun5i.dtsi
@@ -186,6 +186,8 @@ mbus: dram-controller@1c01000 {
 			compatible = "allwinner,sun5i-a13-mbus";
 			reg = <0x01c01000 0x1000>;
 			clocks = <&ccu CLK_MBUS>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			dma-ranges = <0x00000000 0x40000000 0x20000000>;
 			#interconnect-cells = <1>;
 		};
@@ -771,9 +773,6 @@ be0: display-backend@1e60000 {
 			interconnect-names = "dma-mem";
 			status = "disabled";
 
-			assigned-clocks = <&ccu CLK_DE_BE>;
-			assigned-clock-rates = <300000000>;
-
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index 7762fbd..f3425a6 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -1139,9 +1139,6 @@ be1: display-backend@1e40000 {
 				      "ram";
 			resets = <&ccu RST_AHB1_BE1>;
 
-			assigned-clocks = <&ccu CLK_BE1>;
-			assigned-clock-rates = <300000000>;
-
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1185,9 +1182,6 @@ drc1: drc@1e50000 {
 				      "ram";
 			resets = <&ccu RST_AHB1_DRC1>;
 
-			assigned-clocks = <&ccu CLK_IEP_DRC1>;
-			assigned-clock-rates = <300000000>;
-
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1231,9 +1225,6 @@ be0: display-backend@1e60000 {
 				      "ram";
 			resets = <&ccu RST_AHB1_BE0>;
 
-			assigned-clocks = <&ccu CLK_BE0>;
-			assigned-clock-rates = <300000000>;
-
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1274,9 +1265,6 @@ drc0: drc@1e70000 {
 				      "ram";
 			resets = <&ccu RST_AHB1_DRC0>;
 
-			assigned-clocks = <&ccu CLK_IEP_DRC0>;
-			assigned-clock-rates = <300000000>;
-
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
diff --git a/arch/arm/boot/dts/sun7i-a20-linutronix-testbox-v2.dts b/arch/arm/boot/dts/sun7i-a20-linutronix-testbox-v2.dts
new file mode 100644
index 0000000..da5a2ee
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-linutronix-testbox-v2.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2020 Linutronix GmbH
+ * Author: Benedikt Spranger <b.spranger@linutronix.de>
+ */
+
+/dts-v1/;
+#include "sun7i-a20-lamobo-r1.dts"
+
+/ {
+	model = "Lamobo R1";
+	compatible = "linutronix,testbox-v2", "lamobo,lamobo-r1", "allwinner,sun7i-a20";
+
+	leds {
+		led-opto1 {
+			label = "lamobo_r1:opto:powerswitch";
+			gpios = <&pio 7 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-opto2 {
+			label = "lamobo_r1:opto:relay";
+			gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		status = "okay";
+	};
+
+	atecc508a@60 {
+		compatible = "atmel,atecc508a";
+		reg = <0x60>;
+	};
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can_ph_pins>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 92b5be9..ffe1d10 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -47,6 +47,7 @@
 #include <dt-bindings/dma/sun4i-a10.h>
 #include <dt-bindings/clock/sun7i-a20-ccu.h>
 #include <dt-bindings/reset/sun4i-a10-ccu.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -404,11 +405,12 @@ mdio: mdio@1c0b080 {
 		};
 
 		tcon0: lcd-controller@1c0c000 {
-			compatible = "allwinner,sun7i-a20-tcon";
+			compatible = "allwinner,sun7i-a20-tcon0",
+				     "allwinner,sun7i-a20-tcon";
 			reg = <0x01c0c000 0x1000>;
 			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&ccu RST_TCON0>;
-			reset-names = "lcd";
+			resets = <&ccu RST_TCON0>, <&ccu RST_LVDS>;
+			reset-names = "lcd", "lvds";
 			clocks = <&ccu CLK_AHB_LCD0>,
 				 <&ccu CLK_TCON0_CH0>,
 				 <&ccu CLK_TCON0_CH1>;
@@ -454,7 +456,8 @@ tcon0_out_hdmi: endpoint@1 {
 		};
 
 		tcon1: lcd-controller@1c0d000 {
-			compatible = "allwinner,sun7i-a20-tcon";
+			compatible = "allwinner,sun7i-a20-tcon1",
+				     "allwinner,sun7i-a20-tcon";
 			reg = <0x01c0d000 0x1000>;
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 			resets = <&ccu RST_TCON1>;
@@ -932,6 +935,20 @@ ir1_tx_pin: ir1-tx-pin {
 			};
 
 			/omit-if-no-ref/
+			lcd_lvds0_pins: lcd-lvds0-pins {
+				pins = "PD0", "PD1", "PD2", "PD3", "PD4",
+				       "PD5", "PD6", "PD7", "PD8", "PD9";
+				function = "lvds0";
+			};
+
+			/omit-if-no-ref/
+			lcd_lvds1_pins: lcd-lvds1-pins {
+				pins = "PD10", "PD11", "PD12", "PD13", "PD14",
+				       "PD15", "PD16", "PD17", "PD18", "PD19";
+				function = "lvds1";
+			};
+
+			/omit-if-no-ref/
 			mmc0_pins: mmc0-pins {
 				pins = "PF0", "PF1", "PF2",
 				       "PF3", "PF4", "PF5";
diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
index 48487f6..c1362d0 100644
--- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
@@ -684,9 +684,6 @@ drc0: drc@1e70000 {
 			clock-names = "ahb", "mod", "ram";
 			resets = <&ccu RST_BUS_DRC>;
 
-			assigned-clocks = <&ccu CLK_DRC>;
-			assigned-clock-rates = <300000000>;
-
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
index a2c37ad..cfd3858 100644
--- a/arch/arm/boot/dts/sun8i-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a33.dtsi
@@ -372,8 +372,6 @@ &be0 {
 		      "ram", "sat";
 	resets = <&ccu RST_BUS_DE_BE>, <&ccu RST_BUS_SAT>;
 	reset-names = "be", "sat";
-	assigned-clocks = <&ccu CLK_DE_BE>;
-	assigned-clock-rates = <300000000>;
 };
 
 &ccu {
diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
index e8b3669..bfc9bb2 100644
--- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
@@ -493,7 +493,6 @@ gnss {
 };
 
 &usb_otg {
-	dr_mode = "otg";
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index e7b9bef..655404d 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -72,7 +72,7 @@ cpu0: cpu@0 {
 			#cooling-cells = <2>;
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			clocks = <&ccu CLK_C0CPUX>;
@@ -83,7 +83,7 @@ cpu@1 {
 			#cooling-cells = <2>;
 		};
 
-		cpu@2 {
+		cpu2: cpu@2 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			clocks = <&ccu CLK_C0CPUX>;
@@ -94,7 +94,7 @@ cpu@2 {
 			#cooling-cells = <2>;
 		};
 
-		cpu@3 {
+		cpu3: cpu@3 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			clocks = <&ccu CLK_C0CPUX>;
@@ -116,7 +116,7 @@ cpu100: cpu@100 {
 			#cooling-cells = <2>;
 		};
 
-		cpu@101 {
+		cpu101: cpu@101 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			clocks = <&ccu CLK_C1CPUX>;
@@ -127,7 +127,7 @@ cpu@101 {
 			#cooling-cells = <2>;
 		};
 
-		cpu@102 {
+		cpu102: cpu@102 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			clocks = <&ccu CLK_C1CPUX>;
@@ -138,7 +138,7 @@ cpu@102 {
 			#cooling-cells = <2>;
 		};
 
-		cpu@103 {
+		cpu103: cpu@103 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			clocks = <&ccu CLK_C1CPUX>;
@@ -314,7 +314,7 @@ soc {
 
 		display_clocks: clock@1000000 {
 			compatible = "allwinner,sun8i-a83t-de2-clk";
-			reg = <0x01000000 0x100000>;
+			reg = <0x01000000 0x10000>;
 			clocks = <&ccu CLK_BUS_DE>,
 				 <&ccu CLK_PLL_DE>;
 			clock-names = "bus",
@@ -324,6 +324,17 @@ display_clocks: clock@1000000 {
 			#reset-cells = <1>;
 		};
 
+		rotate: rotate@1020000 {
+			compatible = "allwinner,sun8i-a83t-de2-rotate";
+			reg = <0x1020000 0x10000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&display_clocks CLK_BUS_ROT>,
+				 <&display_clocks CLK_ROT>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&display_clocks RST_ROT>;
+		};
+
 		mixer0: mixer@1100000 {
 			compatible = "allwinner,sun8i-a83t-de2-mixer-0";
 			reg = <0x01100000 0x100000>;
@@ -1188,12 +1199,60 @@ cpu0_thermal: cpu0-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&ths 0>;
+
+			trips {
+				cpu0_hot: cpu-hot {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_very_hot: cpu-very-hot {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				cpu-hot-limit {
+					trip = <&cpu0_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		cpu1_thermal: cpu1-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&ths 1>;
+
+			trips {
+				cpu1_hot: cpu-hot {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_very_hot: cpu-very-hot {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				cpu-hot-limit {
+					trip = <&cpu1_hot>;
+					cooling-device = <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		gpu_thermal: gpu-thermal {
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index 20217e2..e83aa686 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -41,6 +41,7 @@
  */
 
 #include "sunxi-h3-h5.dtsi"
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	cpu0_opp_table: opp_table0 {
@@ -227,6 +228,30 @@ cpu_thermal: cpu-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&ths 0>;
+
+			trips {
+				cpu_hot_trip: cpu-hot {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_very_hot_trip: cpu-very-hot {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				cpu-hot-limit {
+					trip = <&cpu_hot_trip>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index a9d5d6d..b782041 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -47,6 +47,7 @@
 #include <dt-bindings/clock/sun8i-tcon-top.h>
 #include <dt-bindings/reset/sun8i-r40-ccu.h>
 #include <dt-bindings/reset/sun8i-de2.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	#address-cells = <1>;
@@ -110,6 +111,22 @@ de: display-engine {
 		status = "disabled";
 	};
 
+	thermal-zones {
+		cpu_thermal: cpu0-thermal {
+			/* milliseconds */
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 0>;
+		};
+
+		gpu_thermal: gpu-thermal {
+			/* milliseconds */
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 1>;
+		};
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -119,7 +136,7 @@ soc {
 		display_clocks: clock@1000000 {
 			compatible = "allwinner,sun8i-r40-de2-clk",
 				     "allwinner,sun8i-h3-de2-clk";
-			reg = <0x01000000 0x100000>;
+			reg = <0x01000000 0x10000>;
 			clocks = <&ccu CLK_BUS_DE>,
 				 <&ccu CLK_DE>;
 			clock-names = "bus",
@@ -562,6 +579,17 @@ wdt: watchdog@1c20c90 {
 			clocks = <&osc24M>;
 		};
 
+		ths: thermal-sensor@1c24c00 {
+			compatible = "allwinner,sun8i-r40-ths";
+			reg = <0x01c24c00 0x100>;
+			clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
+			clock-names = "bus", "mod";
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_THS>;
+			/* TODO: add nvmem-cells for calibration */
+			#thermal-sensor-cells = <1>;
+		};
+
 		uart0: serial@1c28000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;
@@ -738,6 +766,8 @@ mbus: dram-controller@1c62000 {
 			compatible = "allwinner,sun8i-r40-mbus";
 			reg = <0x01c62000 0x1000>;
 			clocks = <&ccu 155>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			dma-ranges = <0x00000000 0x40000000 0x80000000>;
 			#interconnect-cells = <1>;
 		};
diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi
index 81ea508..e531286 100644
--- a/arch/arm/boot/dts/sun8i-v3s.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3s.dtsi
@@ -105,7 +105,7 @@ soc {
 
 		display_clocks: clock@1000000 {
 			compatible = "allwinner,sun8i-v3s-de2-clk";
-			reg = <0x01000000 0x100000>;
+			reg = <0x01000000 0x10000>;
 			clocks = <&ccu CLK_BUS_DE>,
 				 <&ccu CLK_DE>;
 			clock-names = "bus",
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 5e9c306..01a5df9 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -114,7 +114,7 @@ soc {
 
 		display_clocks: clock@1000000 {
 			/* compatible is in per SoC .dtsi file */
-			reg = <0x01000000 0x100000>;
+			reg = <0x01000000 0x10000>;
 			clocks = <&ccu CLK_BUS_DE>,
 				 <&ccu CLK_DE>;
 			clock-names = "bus",
@@ -560,6 +560,8 @@ mbus: dram-controller@1c62000 {
 			compatible = "allwinner,sun8i-h3-mbus";
 			reg = <0x01c62000 0x1000>;
 			clocks = <&ccu CLK_MBUS>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			dma-ranges = <0x00000000 0x40000000 0xc0000000>;
 			#interconnect-cells = <1>;
 		};
@@ -892,6 +894,21 @@ r_i2c_pins: r-i2c-pins {
 				pins = "PL0", "PL1";
 				function = "s_i2c";
 			};
+
+			r_pwm_pin: r-pwm-pin {
+				pins = "PL10";
+				function = "s_pwm";
+			};
+		};
+
+		r_pwm: pwm@1f03800 {
+			compatible = "allwinner,sun8i-h3-pwm";
+			reg = <0x01f03800 0x8>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_pwm_pin>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index 97a5c35..d3e032e 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -1296,7 +1296,13 @@ sound {
 
 		clocks = <&tegra_car TEGRA114_CLK_PLL_A>,
 			 <&tegra_car TEGRA114_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA114_CLK_EXTERN1>;
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
 		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA114_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA114_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA114_CLK_EXTERN1>;
 	};
 };
diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi
index 0d7a632..450a1f1 100644
--- a/arch/arm/boot/dts/tegra114.dtsi
+++ b/arch/arm/boot/dts/tegra114.dtsi
@@ -4,6 +4,7 @@
 #include <dt-bindings/memory/tegra114-mc.h>
 #include <dt-bindings/pinctrl/pinctrl-tegra.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/tegra-pmc.h>
 
 / {
 	compatible = "nvidia,tegra114";
@@ -514,11 +515,12 @@ kbc@7000e200 {
 		status = "disabled";
 	};
 
-	pmc@7000e400 {
+	tegra_pmc: pmc@7000e400 {
 		compatible = "nvidia,tegra114-pmc";
 		reg = <0x7000e400 0x400>;
 		clocks = <&tegra_car TEGRA114_CLK_PCLK>, <&clk32k_in>;
 		clock-names = "pclk", "clk32k_in";
+		#clock-cells = <1>;
 	};
 
 	fuse@7000f800 {
diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
index 0462ed2..de499f7 100644
--- a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
@@ -2009,8 +2009,14 @@ sound {
 		nvidia,audio-codec = <&sgtl5000>;
 		clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
 			 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA124_CLK_EXTERN1>;
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
 		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA124_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA124_CLK_EXTERN1>;
 	};
 
 	thermal-zones {
diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi
index d1e8593..d70a86d 100644
--- a/arch/arm/boot/dts/tegra124-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis.dtsi
@@ -2001,8 +2001,14 @@ sound {
 		nvidia,audio-codec = <&sgtl5000>;
 		clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
 			 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA124_CLK_EXTERN1>;
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
 		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA124_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA124_CLK_EXTERN1>;
 	};
 
 	thermal-zones {
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index d5fd642..1b567e2 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -1782,12 +1782,6 @@ sata-0 {
 		};
 
 		ports {
-			/* Micro A/B */
-			usb2-0 {
-				status = "okay";
-				mode = "otg";
-			};
-
 			/* Mini PCIe */
 			usb2-1 {
 				status = "okay";
@@ -2058,8 +2052,14 @@ sound {
 
 		clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
 			 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA124_CLK_EXTERN1>;
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
 		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA124_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA124_CLK_EXTERN1>;
 	};
 
 	thermal-zones {
diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi
index 3b10f47..9b1af50 100644
--- a/arch/arm/boot/dts/tegra124-nyan.dtsi
+++ b/arch/arm/boot/dts/tegra124-nyan.dtsi
@@ -788,9 +788,15 @@ sound {
 
 		clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
 			 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA124_CLK_EXTERN1>;
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
 		clock-names = "pll_a", "pll_a_out0", "mclk";
 
+		assigned-clocks = <&tegra_car TEGRA124_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA124_CLK_EXTERN1>;
+
 		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>;
 		nvidia,mic-det-gpios =
 				<&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts
index 7309393..8c2ee6e 100644
--- a/arch/arm/boot/dts/tegra124-venice2.dts
+++ b/arch/arm/boot/dts/tegra124-venice2.dts
@@ -1266,8 +1266,14 @@ sound {
 
 		clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
 			 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA124_CLK_EXTERN1>;
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
 		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA124_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA124_CLK_EXTERN1>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index 7f330b1..94cac13 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -6,6 +6,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/reset/tegra124-car.h>
 #include <dt-bindings/thermal/tegra124-soctherm.h>
+#include <dt-bindings/soc/tegra-pmc.h>
 
 / {
 	compatible = "nvidia,tegra124";
@@ -595,11 +596,12 @@ rtc@7000e000 {
 		clocks = <&tegra_car TEGRA124_CLK_RTC>;
 	};
 
-	pmc@7000e400 {
+	tegra_pmc: pmc@7000e400 {
 		compatible = "nvidia,tegra124-pmc";
 		reg = <0x0 0x7000e400 0x0 0x400>;
 		clocks = <&tegra_car TEGRA124_CLK_PCLK>, <&clk32k_in>;
 		clock-names = "pclk", "clk32k_in";
+		#clock-cells = <1>;
 	};
 
 	fuse@7000f800 {
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 9c58e7f..c3b8ad5 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -4,6 +4,7 @@
 #include <dt-bindings/memory/tegra20-mc.h>
 #include <dt-bindings/pinctrl/pinctrl-tegra.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/tegra-pmc.h>
 
 / {
 	compatible = "nvidia,tegra20";
@@ -608,11 +609,12 @@ kbc@7000e200 {
 		status = "disabled";
 	};
 
-	pmc@7000e400 {
+	tegra_pmc: pmc@7000e400 {
 		compatible = "nvidia,tegra20-pmc";
 		reg = <0x7000e400 0x400>;
 		clocks = <&tegra_car TEGRA20_CLK_PCLK>, <&clk32k_in>;
 		clock-names = "pclk", "clk32k_in";
+		#clock-cells = <1>;
 	};
 
 	mc: memory-controller@7000f000 {
diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
index 8b7a827..387b174 100644
--- a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
@@ -1189,7 +1189,13 @@ sound {
 		nvidia,audio-codec = <&sgtl5000>;
 		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
 			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA30_CLK_EXTERN1>;
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
 		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA30_CLK_EXTERN1>;
 	};
 };
diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi
index c18f6f6..6648506 100644
--- a/arch/arm/boot/dts/tegra30-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
@@ -1171,7 +1171,13 @@ sound {
 		nvidia,audio-codec = <&sgtl5000>;
 		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
 			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA30_CLK_EXTERN1>;
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
 		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA30_CLK_EXTERN1>;
 	};
 };
diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts
index a3b0f35..45ef600 100644
--- a/arch/arm/boot/dts/tegra30-beaver.dts
+++ b/arch/arm/boot/dts/tegra30-beaver.dts
@@ -2111,7 +2111,13 @@ sound {
 
 		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
 			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA30_CLK_EXTERN1>;
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
 		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA30_CLK_EXTERN1>;
 	};
 };
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index 7ce61ed..4b4f49a 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -619,8 +619,14 @@ sound {
 
 		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
 			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA30_CLK_EXTERN1>;
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
 		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA30_CLK_EXTERN1>;
 	};
 
 	gpio-keys {
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index 1f9198b..adba554 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -1030,8 +1030,14 @@ sound {
 		nvidia,audio-codec = <&sgtl5000>;
 		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
 			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA30_CLK_EXTERN1>;
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
 		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA30_CLK_EXTERN1>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index 55ae050..d2d05f1 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -4,6 +4,7 @@
 #include <dt-bindings/memory/tegra30-mc.h>
 #include <dt-bindings/pinctrl/pinctrl-tegra.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/tegra-pmc.h>
 
 / {
 	compatible = "nvidia,tegra30";
@@ -714,11 +715,12 @@ kbc@7000e200 {
 		status = "disabled";
 	};
 
-	pmc@7000e400 {
+	tegra_pmc: pmc@7000e400 {
 		compatible = "nvidia,tegra30-pmc";
 		reg = <0x7000e400 0x400>;
 		clocks = <&tegra_car TEGRA30_CLK_PCLK>, <&clk32k_in>;
 		clock-names = "pclk", "clk32k_in";
+		#clock-cells = <1>;
 	};
 
 	mc: memory-controller@7000f000 {
diff --git a/arch/arm/boot/dts/uniphier-ld4.dtsi b/arch/arm/boot/dts/uniphier-ld4.dtsi
index 64ec46c..06e7400 100644
--- a/arch/arm/boot/dts/uniphier-ld4.dtsi
+++ b/arch/arm/boot/dts/uniphier-ld4.dtsi
@@ -51,7 +51,7 @@ soc {
 		ranges;
 		interrupt-parent = <&intc>;
 
-		l2: l2-cache@500c0000 {
+		l2: cache-controller@500c0000 {
 			compatible = "socionext,uniphier-system-cache";
 			reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
 			      <0x506c0000 0x400>;
@@ -245,7 +245,7 @@ dmac: dma-controller@5a000000 {
 			#dma-cells = <1>;
 		};
 
-		sd: sdhc@5a400000 {
+		sd: mmc@5a400000 {
 			compatible = "socionext,uniphier-sd-v2.91";
 			status = "disabled";
 			reg = <0x5a400000 0x200>;
@@ -265,7 +265,7 @@ sd: sdhc@5a400000 {
 			sd-uhs-sdr50;
 		};
 
-		emmc: sdhc@5a500000 {
+		emmc: mmc@5a500000 {
 			compatible = "socionext,uniphier-sd-v2.91";
 			status = "disabled";
 			reg = <0x5a500000 0x200>;
@@ -375,7 +375,7 @@ intc: interrupt-controller@60001000 {
 			interrupt-controller;
 		};
 
-		aidet: aidet@61830000 {
+		aidet: interrupt-controller@61830000 {
 			compatible = "socionext,uniphier-ld4-aidet";
 			reg = <0x61830000 0x200>;
 			interrupt-controller;
@@ -398,7 +398,7 @@ sys_rst: reset {
 			};
 		};
 
-		nand: nand@68000000 {
+		nand: nand-controller@68000000 {
 			compatible = "socionext,uniphier-denali-nand-v5a";
 			status = "disabled";
 			reg-names = "nand_data", "denali_reg";
diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi
index 2ec04d7..1c866f0 100644
--- a/arch/arm/boot/dts/uniphier-pro4.dtsi
+++ b/arch/arm/boot/dts/uniphier-pro4.dtsi
@@ -59,7 +59,7 @@ soc {
 		ranges;
 		interrupt-parent = <&intc>;
 
-		l2: l2-cache@500c0000 {
+		l2: cache-controller@500c0000 {
 			compatible = "socionext,uniphier-system-cache";
 			reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
 			      <0x506c0000 0x400>;
@@ -279,7 +279,7 @@ dmac: dma-controller@5a000000 {
 			#dma-cells = <1>;
 		};
 
-		sd: sdhc@5a400000 {
+		sd: mmc@5a400000 {
 			compatible = "socionext,uniphier-sd-v2.91";
 			status = "disabled";
 			reg = <0x5a400000 0x200>;
@@ -299,7 +299,7 @@ sd: sdhc@5a400000 {
 			sd-uhs-sdr50;
 		};
 
-		emmc: sdhc@5a500000 {
+		emmc: mmc@5a500000 {
 			compatible = "socionext,uniphier-sd-v2.91";
 			status = "disabled";
 			reg = <0x5a500000 0x200>;
@@ -317,7 +317,7 @@ emmc: sdhc@5a500000 {
 			non-removable;
 		};
 
-		sd1: sdhc@5a600000 {
+		sd1: mmc@5a600000 {
 			compatible = "socionext,uniphier-sd-v2.91";
 			status = "disabled";
 			reg = <0x5a600000 0x200>;
@@ -426,7 +426,7 @@ efuse@200 {
 			};
 		};
 
-		aidet: aidet@5fc20000 {
+		aidet: interrupt-controller@5fc20000 {
 			compatible = "socionext,uniphier-pro4-aidet";
 			reg = <0x5fc20000 0x200>;
 			interrupt-controller;
@@ -588,7 +588,7 @@ usb1_rst: reset@40 {
 			};
 		};
 
-		nand: nand@68000000 {
+		nand: nand-controller@68000000 {
 			compatible = "socionext,uniphier-denali-nand-v5a";
 			status = "disabled";
 			reg-names = "nand_data", "denali_reg";
diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi
index ea3961f..8f1ae09 100644
--- a/arch/arm/boot/dts/uniphier-pro5.dtsi
+++ b/arch/arm/boot/dts/uniphier-pro5.dtsi
@@ -131,7 +131,7 @@ soc {
 		ranges;
 		interrupt-parent = <&intc>;
 
-		l2: l2-cache@500c0000 {
+		l2: cache-controller@500c0000 {
 			compatible = "socionext,uniphier-system-cache";
 			reg = <0x500c0000 0x2000>, <0x503c0100 0x8>,
 			      <0x506c0000 0x400>;
@@ -144,7 +144,7 @@ l2: l2-cache@500c0000 {
 			next-level-cache = <&l3>;
 		};
 
-		l3: l3-cache@500c8000 {
+		l3: cache-controller@500c8000 {
 			compatible = "socionext,uniphier-system-cache";
 			reg = <0x500c8000 0x2000>, <0x503c8100 0x8>,
 			      <0x506c8000 0x400>;
@@ -174,8 +174,8 @@ spi1: spi@54006100 {
 			interrupts = <0 216 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_spi1>;
-			clocks = <&peri_clk 11>;
-			resets = <&peri_rst 11>;
+			clocks = <&peri_clk 11>;	/* common with spi0 */
+			resets = <&peri_rst 12>;
 		};
 
 		serial0: serial@54006800 {
@@ -408,7 +408,7 @@ efuse@400 {
 			};
 		};
 
-		aidet: aidet@5fc20000 {
+		aidet: interrupt-controller@5fc20000 {
 			compatible = "socionext,uniphier-pro5-aidet";
 			reg = <0x5fc20000 0x200>;
 			interrupt-controller;
@@ -453,7 +453,155 @@ sys_rst: reset {
 			};
 		};
 
-		nand: nand@68000000 {
+		usb0: usb@65a00000 {
+			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+			status = "disabled";
+			reg = <0x65a00000 0xcd00>;
+			interrupt-names = "host";
+			interrupts = <0 134 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>;
+			clock-names = "ref", "bus_early", "suspend";
+			clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
+			resets = <&usb0_rst 15>;
+			phys = <&usb0_hsphy0>, <&usb0_ssphy0>;
+			dr_mode = "host";
+		};
+
+		usb-glue@65b00000 {
+			compatible = "socionext,uniphier-pro5-dwc3-glue",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65b00000 0x400>;
+
+			usb0_rst: reset@0 {
+				compatible = "socionext,uniphier-pro5-usb3-reset";
+				reg = <0x0 0x4>;
+				#reset-cells = <1>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 14>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 14>;
+			};
+
+			usb0_vbus0: regulator@100 {
+				compatible = "socionext,uniphier-pro5-usb3-regulator";
+				reg = <0x100 0x10>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 14>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 14>;
+			};
+
+			usb0_hsphy0: hs-phy@280 {
+				compatible = "socionext,uniphier-pro5-usb3-hsphy";
+				reg = <0x280 0x10>;
+				#phy-cells = <0>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 14>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 14>;
+				vbus-supply = <&usb0_vbus0>;
+			};
+
+			usb0_ssphy0: ss-phy@380 {
+				compatible = "socionext,uniphier-pro5-usb3-ssphy";
+				reg = <0x380 0x10>;
+				#phy-cells = <0>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 14>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 14>;
+				vbus-supply = <&usb0_vbus0>;
+			};
+		};
+
+		usb1: usb@65c00000 {
+			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+			status = "disabled";
+			reg = <0x65c00000 0xcd00>;
+			interrupt-names = "host";
+			interrupts = <0 137 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb2>;
+			clock-names = "ref", "bus_early", "suspend";
+			clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
+			resets = <&usb1_rst 15>;
+			phys = <&usb1_hsphy0>, <&usb1_hsphy1>, <&usb1_ssphy0>;
+			dr_mode = "host";
+		};
+
+		usb-glue@65d00000 {
+			compatible = "socionext,uniphier-pro5-dwc3-glue",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65d00000 0x400>;
+
+			usb1_rst: reset@0 {
+				compatible = "socionext,uniphier-pro5-usb3-reset";
+				reg = <0x0 0x4>;
+				#reset-cells = <1>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 15>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 15>;
+			};
+
+			usb1_vbus0: regulator@100 {
+				compatible = "socionext,uniphier-pro5-usb3-regulator";
+				reg = <0x100 0x10>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 15>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 15>;
+			};
+
+			usb1_vbus1: regulator@110 {
+				compatible = "socionext,uniphier-pro5-usb3-regulator";
+				reg = <0x110 0x10>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 15>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 15>;
+			};
+
+			usb1_hsphy0: hs-phy@280 {
+				compatible = "socionext,uniphier-pro5-usb3-hsphy";
+				reg = <0x280 0x10>;
+				#phy-cells = <0>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 15>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 15>;
+				vbus-supply = <&usb1_vbus0>;
+			};
+
+			usb1_hsphy1: hs-phy@290 {
+				compatible = "socionext,uniphier-pro5-usb3-hsphy";
+				reg = <0x290 0x10>;
+				#phy-cells = <0>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 15>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 15>;
+				vbus-supply = <&usb1_vbus1>;
+			};
+
+			usb1_ssphy0: ss-phy@380 {
+				compatible = "socionext,uniphier-pro5-usb3-ssphy";
+				reg = <0x380 0x10>;
+				#phy-cells = <0>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 15>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 15>;
+				vbus-supply = <&usb1_vbus0>;
+			};
+		};
+
+		nand: nand-controller@68000000 {
 			compatible = "socionext,uniphier-denali-nand-v5b";
 			status = "disabled";
 			reg-names = "nand_data", "denali_reg";
@@ -469,7 +617,7 @@ nand: nand@68000000 {
 			resets = <&sys_rst 2>, <&sys_rst 2>;
 		};
 
-		emmc: sdhc@68400000 {
+		emmc: mmc@68400000 {
 			compatible = "socionext,uniphier-sd-v3.1";
 			status = "disabled";
 			reg = <0x68400000 0x800>;
@@ -485,7 +633,7 @@ emmc: sdhc@68400000 {
 			non-removable;
 		};
 
-		sd: sdhc@68800000 {
+		sd: mmc@68800000 {
 			compatible = "socionext,uniphier-sd-v3.1";
 			status = "disabled";
 			reg = <0x68800000 0x800>;
diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi
index 13b0d4a7..2f2a249 100644
--- a/arch/arm/boot/dts/uniphier-pxs2.dtsi
+++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi
@@ -157,7 +157,7 @@ soc {
 		ranges;
 		interrupt-parent = <&intc>;
 
-		l2: l2-cache@500c0000 {
+		l2: cache-controller@500c0000 {
 			compatible = "socionext,uniphier-system-cache";
 			reg = <0x500c0000 0x2000>, <0x503c0100 0x8>,
 			      <0x506c0000 0x400>;
@@ -187,8 +187,8 @@ spi1: spi@54006100 {
 			interrupts = <0 216 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_spi1>;
-			clocks = <&peri_clk 11>;
-			resets = <&peri_rst 11>;
+			clocks = <&peri_clk 12>;
+			resets = <&peri_rst 12>;
 		};
 
 		serial0: serial@54006800 {
@@ -446,7 +446,7 @@ peri_rst: reset {
 			};
 		};
 
-		emmc: sdhc@5a000000 {
+		emmc: mmc@5a000000 {
 			compatible = "socionext,uniphier-sd-v3.1.1";
 			status = "disabled";
 			reg = <0x5a000000 0x800>;
@@ -462,7 +462,7 @@ emmc: sdhc@5a000000 {
 			non-removable;
 		};
 
-		sd: sdhc@5a400000 {
+		sd: mmc@5a400000 {
 			compatible = "socionext,uniphier-sd-v3.1.1";
 			status = "disabled";
 			reg = <0x5a400000 0x800>;
@@ -508,7 +508,7 @@ efuse@200 {
 			};
 		};
 
-		aidet: aidet@5fc20000 {
+		aidet: interrupt-controller@5fc20000 {
 			compatible = "socionext,uniphier-pxs2-aidet";
 			reg = <0x5fc20000 0x200>;
 			interrupt-controller;
@@ -761,7 +761,7 @@ usb1_ssphy0: ss-phy@300 {
 			};
 		};
 
-		nand: nand@68000000 {
+		nand: nand-controller@68000000 {
 			compatible = "socionext,uniphier-denali-nand-v5b";
 			status = "disabled";
 			reg-names = "nand_data", "denali_reg";
diff --git a/arch/arm/boot/dts/uniphier-ref-daughter.dtsi b/arch/arm/boot/dts/uniphier-ref-daughter.dtsi
index 04e60c29..a118976 100644
--- a/arch/arm/boot/dts/uniphier-ref-daughter.dtsi
+++ b/arch/arm/boot/dts/uniphier-ref-daughter.dtsi
@@ -7,7 +7,7 @@
 
 &i2c0 {
 	eeprom@50 {
-		compatible = "microchip,24lc128";
+		compatible = "microchip,24lc128", "atmel,24c128";
 		reg = <0x50>;
 		pagesize = <64>;
 	};
diff --git a/arch/arm/boot/dts/uniphier-sld8.dtsi b/arch/arm/boot/dts/uniphier-sld8.dtsi
index 4fc6676..0999216 100644
--- a/arch/arm/boot/dts/uniphier-sld8.dtsi
+++ b/arch/arm/boot/dts/uniphier-sld8.dtsi
@@ -51,7 +51,7 @@ soc {
 		ranges;
 		interrupt-parent = <&intc>;
 
-		l2: l2-cache@500c0000 {
+		l2: cache-controller@500c0000 {
 			compatible = "socionext,uniphier-system-cache";
 			reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
 			      <0x506c0000 0x400>;
@@ -249,7 +249,7 @@ dmac: dma-controller@5a000000 {
 			#dma-cells = <1>;
 		};
 
-		sd: sdhc@5a400000 {
+		sd: mmc@5a400000 {
 			compatible = "socionext,uniphier-sd-v2.91";
 			status = "disabled";
 			reg = <0x5a400000 0x200>;
@@ -269,7 +269,7 @@ sd: sdhc@5a400000 {
 			sd-uhs-sdr50;
 		};
 
-		emmc: sdhc@5a500000 {
+		emmc: mmc@5a500000 {
 			compatible = "socionext,uniphier-sd-v2.91";
 			status = "disabled";
 			reg = <0x5a500000 0x200>;
@@ -379,7 +379,7 @@ intc: interrupt-controller@60001000 {
 			interrupt-controller;
 		};
 
-		aidet: aidet@61830000 {
+		aidet: interrupt-controller@61830000 {
 			compatible = "socionext,uniphier-sld8-aidet";
 			reg = <0x61830000 0x200>;
 			interrupt-controller;
@@ -402,7 +402,7 @@ sys_rst: reset {
 			};
 		};
 
-		nand: nand@68000000 {
+		nand: nand-controller@68000000 {
 			compatible = "socionext,uniphier-denali-nand-v5a";
 			status = "disabled";
 			reg-names = "nand_data", "denali_reg";
diff --git a/arch/arm/boot/dts/versatile-ab-ib2.dts b/arch/arm/boot/dts/versatile-ab-ib2.dts
index 5890cb9..c577ff4 100644
--- a/arch/arm/boot/dts/versatile-ab-ib2.dts
+++ b/arch/arm/boot/dts/versatile-ab-ib2.dts
@@ -10,7 +10,7 @@ / {
 	model = "ARM Versatile AB + IB2 board";
 
 	/* Special IB2 control register */
-	ib2_syscon@27000000 {
+	syscon@27000000 {
 		compatible = "arm,versatile-ib2-syscon", "syscon", "simple-mfd";
 		reg = <0x27000000 0x4>;
 
diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
index dfae90a..5c18348 100644
--- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
@@ -19,7 +19,7 @@
  */
 
 / {
-	smb@8000000 {
+	bus@8000000 {
 		motherboard {
 			model = "V2M-P1";
 			arm,hbi = <0x190>;
diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi
index 2e29d77..5e48b64 100644
--- a/arch/arm/boot/dts/vexpress-v2m.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m.dtsi
@@ -19,7 +19,7 @@
  */
 
 / {
-	smb@4000000 {
+	bus@4000000 {
 		motherboard {
 			model = "V2M-P1";
 			arm,hbi = <0x190>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
index 0dc4277..f82fa34 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
@@ -236,7 +236,7 @@ energy {
 		};
 	};
 
-	smb@8000000 {
+	bus@8000000 {
 		compatible = "simple-bus";
 
 		#address-cells = <2>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
index 1de0a65..3ac95a1 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@@ -608,7 +608,7 @@ etm2_out_port: endpoint {
 		};
 	};
 
-	smb: smb@8000000 {
+	smb: bus@8000000 {
 		compatible = "simple-bus";
 
 		#address-cells = <2>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
index d5b47d5..7aa64ae 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
@@ -206,7 +206,7 @@ temp-dcc {
 		};
 	};
 
-	smb: smb@8000000 {
+	smb: bus@8000000 {
 		compatible = "simple-bus";
 
 		#address-cells = <2>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
index d796efa..623246f 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
@@ -295,7 +295,7 @@ power-vd10-s3 {
 		};
 	};
 
-	smb: smb@4000000 {
+	smb: bus@4000000 {
 		compatible = "simple-bus";
 
 		#address-cells = <2>;
diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
index e2da122..c12a1b8 100644
--- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
- * Copyright 2014 Toradex AG
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright 2014-2020 Toradex
  */
 
 / {
diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi
index fba37b8..cc1e069 100644
--- a/arch/arm/boot/dts/vf-colibri.dtsi
+++ b/arch/arm/boot/dts/vf-colibri.dtsi
@@ -1,42 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
- * Copyright 2014 Toradex AG
+ * Copyright 2014-2020 Toradex
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 / {
diff --git a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts
index 0769989..088964f 100644
--- a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
- * Copyright 2014 Toradex AG
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright 2014-2020 Toradex
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/vf500-colibri.dtsi b/arch/arm/boot/dts/vf500-colibri.dtsi
index 92255f8..8af7ed5 100644
--- a/arch/arm/boot/dts/vf500-colibri.dtsi
+++ b/arch/arm/boot/dts/vf500-colibri.dtsi
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
- * Copyright 2014 Toradex AG
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright 2014-2020 Toradex
  */
 
 #include "vf500.dtsi"
diff --git a/arch/arm/boot/dts/vf500.dtsi b/arch/arm/boot/dts/vf500.dtsi
index b0ec475..0c0dd44 100644
--- a/arch/arm/boot/dts/vf500.dtsi
+++ b/arch/arm/boot/dts/vf500.dtsi
@@ -23,7 +23,7 @@ a5_cpu: cpu@0 {
 	};
 
 	soc {
-		aips-bus@40000000 {
+		bus@40000000 {
 
 			intc: interrupt-controller@40003000 {
 				compatible = "arm,cortex-a9-gic";
@@ -43,7 +43,7 @@ global_timer: timer@40002200 {
 			};
 		};
 
-		aips-bus@40080000 {
+		bus@40080000 {
 			pmu@40089000 {
 				compatible = "arm,cortex-a5-pmu";
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts
index ef9b4d6..fb661e8 100644
--- a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
- * Copyright 2014 Toradex AG
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright 2014-2020 Toradex
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/vf610-colibri.dtsi b/arch/arm/boot/dts/vf610-colibri.dtsi
index 05c9a39..607cec2 100644
--- a/arch/arm/boot/dts/vf610-colibri.dtsi
+++ b/arch/arm/boot/dts/vf610-colibri.dtsi
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
- * Copyright 2014 Toradex AG
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright 2014-2020 Toradex
  */
 
 #include "vf610.dtsi"
diff --git a/arch/arm/boot/dts/vf610-zii-cfu1.dts b/arch/arm/boot/dts/vf610-zii-cfu1.dts
index 2873224..ce1920c 100644
--- a/arch/arm/boot/dts/vf610-zii-cfu1.dts
+++ b/arch/arm/boot/dts/vf610-zii-cfu1.dts
@@ -71,6 +71,14 @@ sff: sfp {
 		los-gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>;
 		tx-disable-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 	};
+
+	supply-voltage-monitor {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 8>, /* 28VDC_IN */
+			      <&adc0 9>, /* +3.3V    */
+			      <&adc1 8>, /* VCC_1V5  */
+			      <&adc1 9>; /* VCC_1V2  */
+	};
 };
 
 &adc0 {
diff --git a/arch/arm/boot/dts/vf610-zii-dev.dtsi b/arch/arm/boot/dts/vf610-zii-dev.dtsi
index a1b4ccee..95d0060 100644
--- a/arch/arm/boot/dts/vf610-zii-dev.dtsi
+++ b/arch/arm/boot/dts/vf610-zii-dev.dtsi
@@ -84,6 +84,14 @@ usb0_vbus: regulator-usb0-vbus {
 		regulator-boot-on;
 		gpio = <&gpio0 6 0>;
 	};
+
+	supply-voltage-monitor {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 8>, /* VCC_1V5 */
+			      <&adc0 9>, /* VCC_1V8 */
+			      <&adc1 8>, /* VCC_1V0 */
+			      <&adc1 9>; /* VCC_1V2 */
+	};
 };
 
 &adc0 {
diff --git a/arch/arm/boot/dts/vf610-zii-spb4.dts b/arch/arm/boot/dts/vf610-zii-spb4.dts
index 77e1484..55b4201 100644
--- a/arch/arm/boot/dts/vf610-zii-spb4.dts
+++ b/arch/arm/boot/dts/vf610-zii-spb4.dts
@@ -42,6 +42,14 @@ reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu {
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
+
+	supply-voltage-monitor {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 8>, /* 28V_SW   */
+			      <&adc0 9>, /* +3.3V    */
+			      <&adc1 8>, /* VCC_1V5  */
+			      <&adc1 9>; /* VCC_1V2  */
+	};
 };
 
 &adc0 {
diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
index 847c585..a6c22a7 100644
--- a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
+++ b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
@@ -46,6 +46,14 @@ reg_vcc_3v3_mcu: regulator {
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
+
+	supply-voltage-monitor {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 8>, /* 12V_MAIN */
+			      <&adc0 9>, /* +3.3V    */
+			      <&adc1 8>, /* VCC_1V5  */
+			      <&adc1 9>; /* VCC_1V2  */
+	};
 };
 
 &adc0 {
diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
index 453fce8..3d05c89 100644
--- a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
+++ b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
@@ -46,6 +46,14 @@ reg_vcc_3v3_mcu: regulator {
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
+
+	supply-voltage-monitor {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 8>, /* 12V_MAIN */
+			      <&adc0 9>, /* +3.3V    */
+			      <&adc1 8>, /* VCC_1V5  */
+			      <&adc1 9>; /* VCC_1V2  */
+	};
 };
 
 &adc0 {
diff --git a/arch/arm/boot/dts/vf610m4-colibri.dts b/arch/arm/boot/dts/vf610m4-colibri.dts
index d4bc0e3..2c2db47 100644
--- a/arch/arm/boot/dts/vf610m4-colibri.dts
+++ b/arch/arm/boot/dts/vf610m4-colibri.dts
@@ -1,45 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
  * Device tree for Colibri VF61 Cortex-M4 support
  *
  * Copyright (C) 2015 Stefan Agner
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
index 028e0ec..2d547e7 100644
--- a/arch/arm/boot/dts/vfxxx.dtsi
+++ b/arch/arm/boot/dts/vfxxx.dtsi
@@ -59,7 +59,7 @@ soc {
 		interrupt-parent = <&mscm_ir>;
 		ranges;
 
-		aips0: aips-bus@40000000 {
+		aips0: bus@40000000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -471,7 +471,7 @@ src: src@4006e000 {
 			};
 		};
 
-		aips1: aips-bus@40080000 {
+		aips1: bus@40080000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index f66bb98..4a0ba2a 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -118,6 +118,7 @@
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_AT91SAM9X_WATCHDOG=y
+CONFIG_SAMA5D4_WATCHDOG=y
 CONFIG_MFD_ATMEL_FLEXCOM=y
 CONFIG_MFD_ATMEL_HLCDC=y
 CONFIG_REGULATOR=y
diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
index 0afcae9..8e7a3ed 100644
--- a/arch/arm/configs/bcm2835_defconfig
+++ b/arch/arm/configs/bcm2835_defconfig
@@ -72,6 +72,7 @@
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SCAN_ASYNC=y
 CONFIG_NETDEVICES=y
+CONFIG_BCMGENET=y
 CONFIG_USB_LAN78XX=y
 CONFIG_USB_USBNET=y
 CONFIG_USB_NET_SMSC95XX=y
@@ -96,9 +97,13 @@
 CONFIG_GPIO_SYSFS=y
 CONFIG_SENSORS_RASPBERRYPI_HWMON=m
 CONFIG_THERMAL=y
+CONFIG_BCM2711_THERMAL=y
 CONFIG_BCM2835_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_BCM2835_WDT=y
+CONFIG_MFD_SYSCON=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_GPIO=y
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_DRM=y
diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
index c8e0c14..3c3a00f 100644
--- a/arch/arm/configs/exynos_defconfig
+++ b/arch/arm/configs/exynos_defconfig
@@ -8,6 +8,7 @@
 CONFIG_ARCH_EXYNOS=y
 CONFIG_CPU_ICACHE_MISMATCH_WORKAROUND=y
 CONFIG_SMP=y
+CONFIG_SCHED_MC=y
 CONFIG_BIG_LITTLE=y
 CONFIG_NR_CPUS=8
 CONFIG_HIGHMEM=y
@@ -17,6 +18,7 @@
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M"
+CONFIG_ENERGY_MODEL=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
@@ -92,7 +94,7 @@
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=y
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_SIZE=32768
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_SG=y
@@ -111,11 +113,13 @@
 CONFIG_USB_USBNET=y
 CONFIG_USB_NET_SMSC75XX=y
 CONFIG_USB_NET_SMSC95XX=y
+CONFIG_BRCMFMAC=m
 CONFIG_MWIFIEX=m
 CONFIG_MWIFIEX_SDIO=m
 CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_GPIO=y
 CONFIG_KEYBOARD_SAMSUNG=y
+CONFIG_KEYBOARD_TM2_TOUCHKEY=y
 CONFIG_KEYBOARD_CROS_EC=y
 # CONFIG_MOUSE_PS2 is not set
 CONFIG_MOUSE_CYAPA=y
@@ -204,6 +208,9 @@
 CONFIG_VIDEO_VIVID=m
 CONFIG_CEC_PLATFORM_DRIVERS=y
 CONFIG_VIDEO_SAMSUNG_S5P_CEC=m
+# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
+CONFIG_VIDEO_S5K6A3=m
+CONFIG_VIDEO_S5C73M3=m
 CONFIG_DRM=y
 CONFIG_DRM_EXYNOS=y
 CONFIG_DRM_EXYNOS_FIMD=y
@@ -276,6 +283,7 @@
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_CLASS_FLASH=y
+CONFIG_LEDS_AAT1290=y
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_PWM=y
 CONFIG_LEDS_MAX77693=y
@@ -320,6 +328,7 @@
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_CRAMFS=y
+CONFIG_SQUASHFS=y
 CONFIG_ROMFS_FS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V4=y
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 8f216a5..5a20d12 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -179,6 +179,9 @@
 CONFIG_MOUSE_PS2_ELANTECH=y
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
+CONFIG_TOUCHSCREEN_AD7879=y
+CONFIG_TOUCHSCREEN_AD7879_I2C=y
+CONFIG_TOUCHSCREEN_ATMEL_MXT=y
 CONFIG_TOUCHSCREEN_DA9052=y
 CONFIG_TOUCHSCREEN_EGALAX=y
 CONFIG_TOUCHSCREEN_GOODIX=y
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 0b02086..f8e4535 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -113,6 +113,7 @@
 CONFIG_ARM_CPUIDLE=y
 CONFIG_ARM_ZYNQ_CPUIDLE=y
 CONFIG_ARM_EXYNOS_CPUIDLE=y
+CONFIG_ARM_TEGRA_CPUIDLE=y
 CONFIG_KERNEL_MODE_NEON=y
 CONFIG_RASPBERRYPI_FIRMWARE=y
 CONFIG_TRUSTED_FOUNDATIONS=y
@@ -640,6 +641,7 @@
 CONFIG_VIDEO_SAMSUNG_S5P_CEC=m
 CONFIG_VIDEO_ADV7180=m
 CONFIG_VIDEO_ML86V7667=m
+CONFIG_IMX_IPUV3_CORE=m
 CONFIG_DRM=y
 # CONFIG_DRM_I2C_CH7006 is not set
 # CONFIG_DRM_I2C_SIL164 is not set
@@ -655,6 +657,11 @@
 CONFIG_ROCKCHIP_DW_HDMI=y
 CONFIG_ROCKCHIP_DW_MIPI_DSI=y
 CONFIG_ROCKCHIP_INNO_HDMI=y
+CONFIG_DRM_IMX=m
+CONFIG_DRM_IMX_PARALLEL_DISPLAY=m
+CONFIG_DRM_IMX_TVE=m
+CONFIG_DRM_IMX_LDB=m
+CONFIG_DRM_IMX_HDMI=m
 CONFIG_DRM_ATMEL_HLCDC=m
 CONFIG_DRM_RCAR_DU=m
 CONFIG_DRM_RCAR_LVDS=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 54f1a21..3cc3ca5 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -56,6 +56,8 @@
 # CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set
 CONFIG_ARM_TI_CPUFREQ=y
 CONFIG_CPU_IDLE=y
+CONFIG_ARM_CPUIDLE=y
+CONFIG_DT_IDLE_STATES=y
 CONFIG_KERNEL_MODE_NEON=y
 CONFIG_PM_DEBUG=y
 CONFIG_ARM_CRYPTO=y
@@ -78,6 +80,8 @@
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_BINFMT_MISC=y
 CONFIG_CMA=y
+CONFIG_ZSMALLOC=m
+CONFIG_PGTABLE_MAPPING=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -130,6 +134,7 @@
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_OMAP_OCP2SCP=y
+CONFIG_SIMPLE_PM_BUS=y
 CONFIG_CONNECTOR=m
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
@@ -139,7 +144,6 @@
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_M25P80=m
 CONFIG_MTD_ONENAND=y
 CONFIG_MTD_ONENAND_VERIFY_WRITE=y
 CONFIG_MTD_ONENAND_OMAP2=y
@@ -149,6 +153,8 @@
 CONFIG_MTD_NAND_OMAP_BCH=y
 CONFIG_MTD_SPI_NOR=m
 CONFIG_MTD_UBI=y
+CONFIG_ZRAM=m
+CONFIG_ZRAM_WRITEBACK=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=16384
@@ -186,10 +192,10 @@
 CONFIG_TI_CPTS=y
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
-CONFIG_AT803X_PHY=y
 CONFIG_DP83848_PHY=y
 CONFIG_DP83867_PHY=y
 CONFIG_MICREL_PHY=y
+CONFIG_AT803X_PHY=y
 CONFIG_SMSC_PHY=y
 CONFIG_PPP=m
 CONFIG_PPP_BSDCOMP=m
@@ -278,6 +284,7 @@
 CONFIG_GPIO_TWL4030=y
 CONFIG_W1=m
 CONFIG_HDQ_MASTER_OMAP=m
+CONFIG_W1_SLAVE_DS250X=m
 CONFIG_POWER_AVS=y
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_GPIO=y
@@ -353,16 +360,16 @@
 CONFIG_DRM_OMAP_PANEL_DSI_CM=m
 CONFIG_DRM_TILCDC=m
 CONFIG_DRM_PANEL_SIMPLE=m
-CONFIG_DRM_DISPLAY_CONNECTOR=m
-CONFIG_DRM_SIMPLE_BRIDGE=m
-CONFIG_DRM_TI_TFP410=m
-CONFIG_DRM_TI_TPD12S015=m
 CONFIG_DRM_PANEL_LG_LB035Q02=m
 CONFIG_DRM_PANEL_NEC_NL8048HL11=m
 CONFIG_DRM_PANEL_SHARP_LS037V7DW01=m
 CONFIG_DRM_PANEL_SONY_ACX565AKM=m
 CONFIG_DRM_PANEL_TPO_TD028TTEC1=m
 CONFIG_DRM_PANEL_TPO_TD043MTEA1=m
+CONFIG_DRM_DISPLAY_CONNECTOR=m
+CONFIG_DRM_SIMPLE_BRIDGE=m
+CONFIG_DRM_TI_TFP410=m
+CONFIG_DRM_TI_TPD12S015=m
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_MODE_HELPERS=y
@@ -482,6 +489,8 @@
 CONFIG_RTC_DRV_OMAP=m
 CONFIG_RTC_DRV_CPCAP=m
 CONFIG_DMADEVICES=y
+CONFIG_CLK_TWL6040=m
+CONFIG_COMMON_CLK_PALMAS=m
 CONFIG_OMAP_IOMMU=y
 CONFIG_REMOTEPROC=y
 CONFIG_OMAP_REMOTEPROC=m
@@ -498,7 +507,9 @@
 CONFIG_IIO_SW_TRIGGER=m
 CONFIG_IIO_ST_ACCEL_3AXIS=m
 CONFIG_CPCAP_ADC=m
+CONFIG_INA2XX_ADC=m
 CONFIG_TI_AM335X_ADC=m
+CONFIG_SENSORS_ISL29028=m
 CONFIG_BMP280=m
 CONFIG_PWM=y
 CONFIG_PWM_OMAP_DMTIMER=m
@@ -514,6 +525,7 @@
 CONFIG_TWL4030_USB=m
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS_SECURITY=y
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA=y
 CONFIG_QFMT_V2=y
@@ -552,10 +564,10 @@
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
 CONFIG_PRINTK_TIME=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_INFO_SPLIT=y
 CONFIG_DEBUG_INFO_DWARF4=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 CONFIG_SCHEDSTATS=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig
index cdc75ef..c882167 100644
--- a/arch/arm/configs/qcom_defconfig
+++ b/arch/arm/configs/qcom_defconfig
@@ -50,6 +50,11 @@
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_IPV6 is not set
+CONFIG_QRTR=m
+CONFIG_QRTR_SMD=m
+CONFIG_BT=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_BCM=y
 CONFIG_CFG80211=m
 CONFIG_MAC80211=m
 CONFIG_RFKILL=y
@@ -111,6 +116,7 @@
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_MSM=y
 CONFIG_SERIAL_MSM_CONSOLE=y
+CONFIG_SERIAL_DEV_BUS=y
 CONFIG_HW_RANDOM=y
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
diff --git a/arch/arm/configs/rpc_defconfig b/arch/arm/configs/rpc_defconfig
index 3b82b64..c090643 100644
--- a/arch/arm/configs/rpc_defconfig
+++ b/arch/arm/configs/rpc_defconfig
@@ -32,7 +32,6 @@
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
 CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 73ed73a..1530091 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -202,7 +202,6 @@
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
 CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_CHR_DEV_SCH=m
 CONFIG_SCSI_CONSTANTS=y
diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig
index a27592d..aa94369 100644
--- a/arch/arm/configs/tegra_defconfig
+++ b/arch/arm/configs/tegra_defconfig
@@ -25,6 +25,7 @@
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPUFREQ_DT=y
 CONFIG_CPU_IDLE=y
+CONFIG_ARM_TEGRA_CPUIDLE=y
 CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_TRUSTED_FOUNDATIONS=y
diff --git a/arch/arm/crypto/.gitignore b/arch/arm/crypto/.gitignore
index a3c7ad5..8d7f4bc 100644
--- a/arch/arm/crypto/.gitignore
+++ b/arch/arm/crypto/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 aesbs-core.S
 sha256-core.S
 sha512-core.S
diff --git a/arch/arm/include/asm/dma-iommu.h b/arch/arm/include/asm/dma-iommu.h
index 772f48e..86405cc 100644
--- a/arch/arm/include/asm/dma-iommu.h
+++ b/arch/arm/include/asm/dma-iommu.h
@@ -33,7 +33,5 @@ int arm_iommu_attach_device(struct device *dev,
 					struct dma_iommu_mapping *mapping);
 void arm_iommu_detach_device(struct device *dev);
 
-int arm_dma_supported(struct device *dev, u64 mask);
-
 #endif /* __KERNEL__ */
 #endif
diff --git a/arch/arm/include/asm/nwflash.h b/arch/arm/include/asm/nwflash.h
index 0ec6f07..66b7e68 100644
--- a/arch/arm/include/asm/nwflash.h
+++ b/arch/arm/include/asm/nwflash.h
@@ -2,7 +2,6 @@
 #ifndef _FLASH_H
 #define _FLASH_H
 
-#define FLASH_MINOR		 160	/* MAJOR is 10 - miscdevice */
 #define CMD_WRITE_DISABLE	 0
 #define CMD_WRITE_ENABLE	 0x28
 #define CMD_WRITE_BASE64K_ENABLE 0x47
diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h
index c2b75cb..11b058a 100644
--- a/arch/arm/include/asm/page.h
+++ b/arch/arm/include/asm/page.h
@@ -161,9 +161,7 @@ extern int pfn_valid(unsigned long);
 
 #endif /* !__ASSEMBLY__ */
 
-#define VM_DATA_DEFAULT_FLAGS \
-	(((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0) | \
-	 VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+#define VM_DATA_DEFAULT_FLAGS	VM_DATA_FLAGS_TSK_EXEC
 
 #include <asm-generic/getorder.h>
 
diff --git a/arch/arm/include/asm/pgtable-2level.h b/arch/arm/include/asm/pgtable-2level.h
index 0d3ea35..9e084a4 100644
--- a/arch/arm/include/asm/pgtable-2level.h
+++ b/arch/arm/include/asm/pgtable-2level.h
@@ -211,8 +211,6 @@ static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr)
 #define pmd_addr_end(addr,end) (end)
 
 #define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext)
-#define pte_special(pte)	(0)
-static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
 
 /*
  * We don't have huge page support for short descriptors, for the moment
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 0483cf4..befc8fc 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -243,19 +243,8 @@ static inline void __sync_icache_dcache(pte_t pteval)
 extern void __sync_icache_dcache(pte_t pteval);
 #endif
 
-static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
-			      pte_t *ptep, pte_t pteval)
-{
-	unsigned long ext = 0;
-
-	if (addr < TASK_SIZE && pte_valid_user(pteval)) {
-		if (!pte_special(pteval))
-			__sync_icache_dcache(pteval);
-		ext |= PTE_EXT_NG;
-	}
-
-	set_pte_ext(ptep, pteval, ext);
-}
+void set_pte_at(struct mm_struct *mm, unsigned long addr,
+		      pte_t *ptep, pte_t pteval);
 
 static inline pte_t clear_pte_bit(pte_t pte, pgprot_t prot)
 {
diff --git a/arch/arm/include/debug/stm32.S b/arch/arm/include/debug/stm32.S
index 1abb32f..f3c4a37 100644
--- a/arch/arm/include/debug/stm32.S
+++ b/arch/arm/include/debug/stm32.S
@@ -4,14 +4,13 @@
  * Author:   Gerald Baeza <gerald.baeza@st.com> for STMicroelectronics.
  */
 
-#define STM32_UART_BASE			0x40011000	/* USART1 */
-
 #ifdef CONFIG_STM32F4_DEBUG_UART
 #define STM32_USART_SR_OFF		0x00
 #define STM32_USART_TDR_OFF		0x04
 #endif
 
-#ifdef CONFIG_STM32F7_DEBUG_UART
+#if defined(CONFIG_STM32F7_DEBUG_UART) || defined(CONFIG_STM32H7_DEBUG_UART) || \
+	defined(CONFIG_STM32MP1_DEBUG_UART)
 #define STM32_USART_SR_OFF		0x1C
 #define STM32_USART_TDR_OFF		0x28
 #endif
@@ -20,8 +19,8 @@
 #define STM32_USART_TXE			(1 << 7)	/* Tx data reg empty */
 
 .macro	addruart, rp, rv, tmp
-	ldr	\rp,      =STM32_UART_BASE	@ physical base
-	ldr	\rv,      =STM32_UART_BASE      @ virt base /* NoMMU */
+	ldr	\rp, =CONFIG_DEBUG_UART_PHYS @ physical base
+	ldr	\rv, =CONFIG_DEBUG_UART_VIRT @ virt base
 .endm
 
 .macro  senduart,rd,rx
diff --git a/arch/arm/kernel/.gitignore b/arch/arm/kernel/.gitignore
index c5f676c..bbb90f9 100644
--- a/arch/arm/kernel/.gitignore
+++ b/arch/arm/kernel/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 vmlinux.lds
diff --git a/arch/arm/kernel/relocate_kernel.S b/arch/arm/kernel/relocate_kernel.S
index 7eaa2ae..72a0878 100644
--- a/arch/arm/kernel/relocate_kernel.S
+++ b/arch/arm/kernel/relocate_kernel.S
@@ -25,26 +25,26 @@
 	ldr	r3, [r0],#4
 
 	/* Is it a destination page. Put destination address to r4 */
-	tst	r3,#1,0
+	tst	r3,#1
 	beq	1f
 	bic	r4,r3,#1
 	b	0b
 1:
 	/* Is it an indirection page */
-	tst	r3,#2,0
+	tst	r3,#2
 	beq	1f
 	bic	r0,r3,#2
 	b	0b
 1:
 
 	/* are we done ? */
-	tst	r3,#4,0
+	tst	r3,#4
 	beq	1f
 	b	2f
 
 1:
 	/* is it source ? */
-	tst	r3,#8,0
+	tst	r3,#8
 	beq	0b
 	bic r3,r3,#8
 	mov r6,#1024
diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c
index 4574e6a..11a964f 100644
--- a/arch/arm/kernel/unwind.c
+++ b/arch/arm/kernel/unwind.c
@@ -444,7 +444,7 @@ int unwind_frame(struct stackframe *frame)
 		ctrl.vrs[PC] = ctrl.vrs[LR];
 
 	/* check for infinite loop */
-	if (frame->pc == ctrl.vrs[PC])
+	if (frame->pc == ctrl.vrs[PC] && frame->sp == ctrl.vrs[SP])
 		return -URC_FAILURE;
 
 	frame->fp = ctrl.vrs[FP];
diff --git a/arch/arm/mach-at91/.gitignore b/arch/arm/mach-at91/.gitignore
index 2ecd6f5..f6d4738 100644
--- a/arch/arm/mach-at91/.gitignore
+++ b/arch/arm/mach-at91/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 pm_data-offsets.h
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 7979420..ccd7e80 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -153,7 +153,6 @@
 
 config COMMON_CLK_AT91
 	bool
-	select COMMON_CLK
 	select MFD_SYSCON
 
 config HAVE_AT91_SMD
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 374b9d1..074bde6 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -736,13 +736,36 @@ static void __init at91_pm_modes_init(void)
 
 struct pmc_info {
 	unsigned long uhp_udp_mask;
+	unsigned long mckr;
+	unsigned long version;
 };
 
 static const struct pmc_info pmc_infos[] __initconst = {
-	{ .uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP },
-	{ .uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP },
-	{ .uhp_udp_mask = AT91SAM926x_PMC_UHP },
-	{ .uhp_udp_mask = 0 },
+	{
+		.uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP,
+		.mckr = 0x30,
+		.version = AT91_PMC_V1,
+	},
+
+	{
+		.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP,
+		.mckr = 0x30,
+		.version = AT91_PMC_V1,
+	},
+	{
+		.uhp_udp_mask = AT91SAM926x_PMC_UHP,
+		.mckr = 0x30,
+		.version = AT91_PMC_V1,
+	},
+	{	.uhp_udp_mask = 0,
+		.mckr = 0x30,
+		.version = AT91_PMC_V1,
+	},
+	{
+		.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP,
+		.mckr = 0x28,
+		.version = AT91_PMC_V2,
+	},
 };
 
 static const struct of_device_id atmel_pmc_ids[] __initconst = {
@@ -757,7 +780,7 @@ static const struct of_device_id atmel_pmc_ids[] __initconst = {
 	{ .compatible = "atmel,sama5d3-pmc", .data = &pmc_infos[1] },
 	{ .compatible = "atmel,sama5d4-pmc", .data = &pmc_infos[1] },
 	{ .compatible = "atmel,sama5d2-pmc", .data = &pmc_infos[1] },
-	{ .compatible = "microchip,sam9x60-pmc", .data = &pmc_infos[1] },
+	{ .compatible = "microchip,sam9x60-pmc", .data = &pmc_infos[4] },
 	{ /* sentinel */ },
 };
 
@@ -779,6 +802,8 @@ static void __init at91_pm_init(void (*pm_idle)(void))
 
 	pmc = of_id->data;
 	soc_pm.data.uhp_udp_mask = pmc->uhp_udp_mask;
+	soc_pm.data.pmc_mckr_offset = pmc->mckr;
+	soc_pm.data.pmc_version = pmc->version;
 
 	if (pm_idle)
 		arm_pm_idle = pm_idle;
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index 9fa4f48..218e8d1 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -33,6 +33,8 @@ struct at91_pm_data {
 	void __iomem *sfrbu;
 	unsigned int standby_mode;
 	unsigned int suspend_mode;
+	unsigned int pmc_mckr_offset;
+	unsigned int pmc_version;
 };
 #endif
 
diff --git a/arch/arm/mach-at91/pm_data-offsets.c b/arch/arm/mach-at91/pm_data-offsets.c
index f2d893c..82089ff 100644
--- a/arch/arm/mach-at91/pm_data-offsets.c
+++ b/arch/arm/mach-at91/pm_data-offsets.c
@@ -12,6 +12,10 @@ int main(void)
 	DEFINE(PM_DATA_MODE,		offsetof(struct at91_pm_data, mode));
 	DEFINE(PM_DATA_SHDWC,		offsetof(struct at91_pm_data, shdwc));
 	DEFINE(PM_DATA_SFRBU,		offsetof(struct at91_pm_data, sfrbu));
+	DEFINE(PM_DATA_PMC_MCKR_OFFSET,	offsetof(struct at91_pm_data,
+						 pmc_mckr_offset));
+	DEFINE(PM_DATA_PMC_VERSION,	offsetof(struct at91_pm_data,
+						 pmc_version));
 
 	return 0;
 }
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
index ed57c87..be9764e 100644
--- a/arch/arm/mach-at91/pm_suspend.S
+++ b/arch/arm/mach-at91/pm_suspend.S
@@ -18,6 +18,7 @@
 pmc	.req	r0
 tmp1	.req	r4
 tmp2	.req	r5
+tmp3	.req	r6
 
 /*
  * Wait until master clock is ready (after switching master clock source)
@@ -93,13 +94,17 @@
 	str	tmp1, .memtype
 	ldr	tmp1, [r0, #PM_DATA_MODE]
 	str	tmp1, .pm_mode
+	ldr	tmp1, [r0, #PM_DATA_PMC_MCKR_OFFSET]
+	str	tmp1, .mckr_offset
+	ldr	tmp1, [r0, #PM_DATA_PMC_VERSION]
+	str	tmp1, .pmc_version
 	/* Both ldrne below are here to preload their address in the TLB */
 	ldr	tmp1, [r0, #PM_DATA_SHDWC]
 	str	tmp1, .shdwc
 	cmp	tmp1, #0
 	ldrne	tmp2, [tmp1, #0]
 	ldr	tmp1, [r0, #PM_DATA_SFRBU]
-	str	tmp1, .sfr
+	str	tmp1, .sfrbu
 	cmp	tmp1, #0
 	ldrne	tmp2, [tmp1, #0x10]
 
@@ -138,14 +143,15 @@
 ENTRY(at91_backup_mode)
 	/* Switch the master clock source to slow clock. */
 	ldr	pmc, .pmc_base
-	ldr	tmp1, [pmc, #AT91_PMC_MCKR]
+	ldr	tmp2, .mckr_offset
+	ldr	tmp1, [pmc, tmp2]
 	bic	tmp1, tmp1, #AT91_PMC_CSS
-	str	tmp1, [pmc, #AT91_PMC_MCKR]
+	str	tmp1, [pmc, tmp2]
 
 	wait_mckrdy
 
 	/*BUMEN*/
-	ldr	r0, .sfr
+	ldr	r0, .sfrbu
 	mov	tmp1, #0x1
 	str	tmp1, [r0, #0x10]
 
@@ -218,6 +224,7 @@
  */
 .macro at91_pm_ulp1_mode
 	ldr	pmc, .pmc_base
+	ldr	tmp2, .mckr_offset
 
 	/* Save RC oscillator state and check if it is enabled. */
 	ldr	tmp1, [pmc, #AT91_PMC_SR]
@@ -254,10 +261,10 @@
 	str	tmp1, [pmc, #AT91_CKGR_MOR]
 
 	/* Switch the master clock source to main clock */
-	ldr	tmp1, [pmc, #AT91_PMC_MCKR]
+	ldr	tmp1, [pmc, tmp2]
 	bic	tmp1, tmp1, #AT91_PMC_CSS
 	orr	tmp1, tmp1, #AT91_PMC_CSS_MAIN
-	str	tmp1, [pmc, #AT91_PMC_MCKR]
+	str	tmp1, [pmc, tmp2]
 
 	wait_mckrdy
 
@@ -268,6 +275,10 @@
 	orr	tmp1, tmp1, #AT91_PMC_KEY
 	str	tmp1, [pmc, #AT91_CKGR_MOR]
 
+	/* Quirk for SAM9X60's PMC */
+	nop
+	nop
+
 	wait_mckrdy
 
 	/* Enable the crystal oscillator */
@@ -280,9 +291,9 @@
 	wait_moscrdy
 
 	/* Switch the master clock source to slow clock */
-	ldr	tmp1, [pmc, #AT91_PMC_MCKR]
+	ldr	tmp1, [pmc, tmp2]
 	bic	tmp1, tmp1, #AT91_PMC_CSS
-	str	tmp1, [pmc, #AT91_PMC_MCKR]
+	str	tmp1, [pmc, tmp2]
 
 	wait_mckrdy
 
@@ -296,10 +307,10 @@
 	wait_moscsels
 
 	/* Switch the master clock source to main clock */
-	ldr	tmp1, [pmc, #AT91_PMC_MCKR]
+	ldr	tmp1, [pmc, tmp2]
 	bic	tmp1, tmp1, #AT91_PMC_CSS
 	orr	tmp1, tmp1, #AT91_PMC_CSS_MAIN
-	str	tmp1, [pmc, #AT91_PMC_MCKR]
+	str	tmp1, [pmc, tmp2]
 
 	wait_mckrdy
 
@@ -323,21 +334,160 @@
 3:
 .endm
 
+.macro at91_plla_disable
+	/* Save PLLA setting and disable it */
+	ldr	tmp1, .pmc_version
+	cmp	tmp1, #AT91_PMC_V1
+	beq	1f
+
+#ifdef CONFIG_SOC_SAM9X60
+	/* Save PLLA settings. */
+	ldr	tmp2, [pmc, #AT91_PMC_PLL_UPDT]
+	bic	tmp2, tmp2, #AT91_PMC_PLL_UPDT_ID
+	str	tmp2, [pmc, #AT91_PMC_PLL_UPDT]
+
+	/* save div. */
+	mov	tmp1, #0
+	ldr	tmp2, [pmc, #AT91_PMC_PLL_CTRL0]
+	bic	tmp2, tmp2, #0xffffff00
+	orr	tmp1, tmp1, tmp2
+
+	/* save mul. */
+	ldr	tmp2, [pmc, #AT91_PMC_PLL_CTRL1]
+	bic	tmp2, tmp2, #0xffffff
+	orr	tmp1, tmp1, tmp2
+	str	tmp1, .saved_pllar
+
+	/* step 2. */
+	ldr	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+	bic	tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE
+	bic	tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID
+	str	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+
+	/* step 3. */
+	ldr	tmp1, [pmc, #AT91_PMC_PLL_CTRL0]
+	bic	tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENPLLCK
+	orr	tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENPLL
+	str	tmp1, [pmc, #AT91_PMC_PLL_CTRL0]
+
+	/* step 4. */
+	ldr	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+	orr	tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE
+	bic	tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID
+	str	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+
+	/* step 5. */
+	ldr	tmp1, [pmc, #AT91_PMC_PLL_CTRL0]
+	bic	tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENPLL
+	str	tmp1, [pmc, #AT91_PMC_PLL_CTRL0]
+
+	/* step 7. */
+	ldr	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+	orr	tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE
+	bic	tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID
+	str	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+
+	b	2f
+#endif
+
+1:	/* Save PLLA setting and disable it */
+	ldr	tmp1, [pmc, #AT91_CKGR_PLLAR]
+	str	tmp1, .saved_pllar
+
+	/* Disable PLLA. */
+	mov	tmp1, #AT91_PMC_PLLCOUNT
+	orr	tmp1, tmp1, #(1 << 29)		/* bit 29 always set */
+	str	tmp1, [pmc, #AT91_CKGR_PLLAR]
+2:
+.endm
+
+.macro at91_plla_enable
+	ldr	tmp2, .saved_pllar
+	ldr	tmp3, .pmc_version
+	cmp	tmp3, #AT91_PMC_V1
+	beq	4f
+
+#ifdef CONFIG_SOC_SAM9X60
+	/* step 1. */
+	ldr	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+	bic	tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID
+	bic	tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE
+	str	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+
+	/* step 2. */
+	ldr	tmp1, =#AT91_PMC_PLL_ACR_DEFAULT_PLLA
+	str	tmp1, [pmc, #AT91_PMC_PLL_ACR]
+
+	/* step 3. */
+	ldr	tmp1, [pmc, #AT91_PMC_PLL_CTRL1]
+	mov	tmp3, tmp2
+	bic	tmp3, tmp3, #0xffffff
+	orr	tmp1, tmp1, tmp3
+	str	tmp1, [pmc, #AT91_PMC_PLL_CTRL1]
+
+	/* step 8. */
+	ldr	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+	bic	tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID
+	orr	tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE
+	str	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+
+	/* step 9. */
+	ldr	tmp1, [pmc, #AT91_PMC_PLL_CTRL0]
+	orr	tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENLOCK
+	orr	tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENPLL
+	orr	tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENPLLCK
+	bic	tmp1, tmp1, #0xff
+	mov	tmp3, tmp2
+	bic	tmp3, tmp3, #0xffffff00
+	orr	tmp1, tmp1, tmp3
+	str	tmp1, [pmc, #AT91_PMC_PLL_CTRL0]
+
+	/* step 10. */
+	ldr	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+	orr	tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE
+	bic	tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID
+	str	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+
+	/* step 11. */
+3:	ldr	tmp1, [pmc, #AT91_PMC_PLL_ISR0]
+	tst	tmp1, #0x1
+	beq	3b
+	b	2f
+#endif
+
+	/* Restore PLLA setting */
+4:	str	tmp2, [pmc, #AT91_CKGR_PLLAR]
+
+	/* Enable PLLA. */
+	tst	tmp2, #(AT91_PMC_MUL &  0xff0000)
+	bne	1f
+	tst	tmp2, #(AT91_PMC_MUL & ~0xff0000)
+	beq	2f
+
+1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
+	tst	tmp1, #AT91_PMC_LOCKA
+	beq	1b
+2:
+.endm
+
 ENTRY(at91_ulp_mode)
 	ldr	pmc, .pmc_base
+	ldr	tmp2, .mckr_offset
 
 	/* Save Master clock setting */
-	ldr	tmp1, [pmc, #AT91_PMC_MCKR]
+	ldr	tmp1, [pmc, tmp2]
 	str	tmp1, .saved_mckr
 
 	/*
 	 * Set the Master clock source to slow clock
 	 */
 	bic	tmp1, tmp1, #AT91_PMC_CSS
-	str	tmp1, [pmc, #AT91_PMC_MCKR]
+	str	tmp1, [pmc, tmp2]
 
 	wait_mckrdy
 
+	at91_plla_disable
+
 	ldr	r0, .pm_mode
 	cmp	r0, #AT91_PM_ULP1
 	beq	ulp1_mode
@@ -352,11 +502,14 @@
 ulp_exit:
 	ldr	pmc, .pmc_base
 
+	at91_plla_enable
+
 	/*
 	 * Restore master clock setting
 	 */
-	ldr	tmp1, .saved_mckr
-	str	tmp1, [pmc, #AT91_PMC_MCKR]
+	ldr	tmp1, .mckr_offset
+	ldr	tmp2, .saved_mckr
+	str	tmp2, [pmc, tmp1]
 
 	wait_mckrdy
 
@@ -496,14 +649,20 @@
 	.word 0
 .shdwc:
 	.word 0
-.sfr:
+.sfrbu:
 	.word 0
 .memtype:
 	.word 0
 .pm_mode:
 	.word 0
+.mckr_offset:
+	.word 0
+.pmc_version:
+	.word 0
 .saved_mckr:
 	.word 0
+.saved_pllar:
+	.word 0
 .saved_sam9_lpr:
 	.word 0
 .saved_sam9_lpr1:
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index fcfe2a0..6aa938b 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -20,7 +20,6 @@
 	select GPIOLIB
 	select ARM_AMBA
 	select PINCTRL
-	select PCI_DOMAINS_GENERIC if PCI
 	help
 	  This enables support for systems based on Broadcom IPROC architected SoCs.
 	  The IPROC complex contains one or more ARM CPUs along with common
@@ -54,7 +53,6 @@
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_775420
 	select ARM_ERRATA_764369 if SMP
-	select HAVE_SMP
 	select THERMAL
 	select THERMAL_OF
 	help
@@ -73,7 +71,6 @@
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_775420
 	select ARM_ERRATA_764369 if SMP
-	select HAVE_SMP
 
 	help
 	  Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores.
@@ -109,7 +106,6 @@
 	bool "Broadcom BCM281XX SoC family"
 	depends on ARCH_MULTI_V7
 	select ARCH_BCM_MOBILE
-	select HAVE_SMP
 	help
 	  Enable support for the BCM281XX family, which includes
 	  BCM11130, BCM11140, BCM11351, BCM28145 and BCM28155
@@ -119,7 +115,6 @@
 	bool "Broadcom BCM21664 SoC family"
 	depends on ARCH_MULTI_V7
 	select ARCH_BCM_MOBILE
-	select HAVE_SMP
 	help
 	  Enable support for the BCM21664 family, which includes
 	  BCM21663 and BCM21664 variants.
@@ -128,7 +123,6 @@
 	bool "Broadcom BCM23550 SoC"
 	depends on ARCH_MULTI_V7
 	select ARCH_BCM_MOBILE
-	select HAVE_SMP
 	help
 	  Enable support for the BCM23550.
 
@@ -165,7 +159,6 @@
 	select ZONE_DMA if ARCH_MULTI_V7
 	select ARM_TIMER_SP804
 	select HAVE_ARM_ARCH_TIMER if ARCH_MULTI_V7
-	select TIMER_OF
 	select BCM2835_TIMER
 	select PINCTRL
 	select PINCTRL_BCM2835
@@ -201,7 +194,6 @@
 	select HAVE_ARM_ARCH_TIMER
 	select HAVE_ARM_TWD if SMP
 	select HAVE_ARM_SCU if SMP
-	select HAVE_SMP
 	help
 	  This enables support for systems based on Broadcom DSL SoCs.
 	  It currently supports the 'BCM63XX' ARM-based family, which includes
diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c
index 1d61a77..e4f4b20 100644
--- a/arch/arm/mach-cns3xxx/core.c
+++ b/arch/arm/mach-cns3xxx/core.c
@@ -189,12 +189,6 @@ static irqreturn_t cns3xxx_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction cns3xxx_timer_irq = {
-	.name		= "timer",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= cns3xxx_timer_interrupt,
-};
-
 /*
  * Set up the clock source and clock events devices
  */
@@ -245,7 +239,9 @@ static void __init __cns3xxx_timer_init(unsigned int timer_irq)
 	writel(val, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
 
 	/* Make irqs happen for the system timer */
-	setup_irq(timer_irq, &cns3xxx_timer_irq);
+	if (request_irq(timer_irq, cns3xxx_timer_interrupt,
+			IRQF_TIMER | IRQF_IRQPOLL, "timer", NULL))
+		pr_err("Failed to request irq %d (timer)\n", timer_irq);
 
 	cns3xxx_clockevents_init(timer_irq);
 }
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index 01b830a..dbe970e 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -48,7 +48,7 @@
 /*****************************************************************************
  * I/O Address Mapping
  ****************************************************************************/
-static struct map_desc dove_io_desc[] __initdata = {
+static struct map_desc __maybe_unused dove_io_desc[] __initdata = {
 	{
 		.virtual	= (unsigned long) DOVE_SB_REGS_VIRT_BASE,
 		.pfn		= __phys_to_pfn(DOVE_SB_REGS_PHYS_BASE),
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index da2ff4f..575b2e2 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -201,17 +201,13 @@ ebsa110_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction ebsa110_timer_irq = {
-	.name		= "EBSA110 Timer Tick",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= ebsa110_timer_interrupt,
-};
-
 /*
  * Set up timer interrupt.
  */
 void __init ebsa110_timer_init(void)
 {
+	int irq = IRQ_EBSA110_TIMER0;
+
 	arch_gettimeoffset = ebsa110_gettimeoffset;
 
 	/*
@@ -221,7 +217,9 @@ void __init ebsa110_timer_init(void)
 	__raw_writeb(COUNT & 0xff, PIT_T1);
 	__raw_writeb(COUNT >> 8, PIT_T1);
 
-	setup_irq(IRQ_EBSA110_TIMER0, &ebsa110_timer_irq);
+	if (request_irq(irq, ebsa110_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
+			"EBSA110 Timer Tick", NULL))
+		pr_err("Failed to request irq %d (EBSA110 Timer Tick)\n", irq);
 }
 
 static struct plat_serial8250_port serial_platform_data[] = {
diff --git a/arch/arm/mach-ep93xx/timer-ep93xx.c b/arch/arm/mach-ep93xx/timer-ep93xx.c
index de99883..dd4b164 100644
--- a/arch/arm/mach-ep93xx/timer-ep93xx.c
+++ b/arch/arm/mach-ep93xx/timer-ep93xx.c
@@ -117,15 +117,11 @@ static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction ep93xx_timer_irq = {
-	.name		= "ep93xx timer",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= ep93xx_timer_interrupt,
-	.dev_id		= &ep93xx_clockevent,
-};
-
 void __init ep93xx_timer_init(void)
 {
+	int irq = IRQ_EP93XX_TIMER3;
+	unsigned long flags = IRQF_TIMER | IRQF_IRQPOLL;
+
 	/* Enable and register clocksource and sched_clock on timer 4 */
 	writel(EP93XX_TIMER4_VALUE_HIGH_ENABLE,
 	       EP93XX_TIMER4_VALUE_HIGH);
@@ -136,7 +132,9 @@ void __init ep93xx_timer_init(void)
 			     EP93XX_TIMER4_RATE);
 
 	/* Set up clockevent on timer 3 */
-	setup_irq(IRQ_EP93XX_TIMER3, &ep93xx_timer_irq);
+	if (request_irq(irq, ep93xx_timer_interrupt, flags, "ep93xx timer",
+			&ep93xx_clockevent))
+		pr_err("Failed to request irq %d (ep93xx timer)\n", irq);
 	clockevents_config_and_register(&ep93xx_clockevent,
 					EP93XX_TIMER123_RATE,
 					1,
diff --git a/arch/arm/mach-footbridge/dc21285-timer.c b/arch/arm/mach-footbridge/dc21285-timer.c
index f76212d..2908c9e 100644
--- a/arch/arm/mach-footbridge/dc21285-timer.c
+++ b/arch/arm/mach-footbridge/dc21285-timer.c
@@ -101,13 +101,6 @@ static irqreturn_t timer1_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction footbridge_timer_irq = {
-	.name		= "dc21285_timer1",
-	.handler	= timer1_interrupt,
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.dev_id		= &ckevt_dc21285,
-};
-
 /*
  * Set up timer interrupt.
  */
@@ -118,7 +111,9 @@ void __init footbridge_timer_init(void)
 
 	clocksource_register_hz(&cksrc_dc21285, rate);
 
-	setup_irq(ce->irq, &footbridge_timer_irq);
+	if (request_irq(ce->irq, timer1_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
+			"dc21285_timer1", &ckevt_dc21285))
+		pr_err("Failed to request irq %d (dc21285_timer1)", ce->irq);
 
 	ce->cpumask = cpumask_of(smp_processor_id());
 	clockevents_config_and_register(ce, rate, 0x4, 0xffffff);
diff --git a/arch/arm/mach-footbridge/isa-irq.c b/arch/arm/mach-footbridge/isa-irq.c
index 88a5539..842ddb4 100644
--- a/arch/arm/mach-footbridge/isa-irq.c
+++ b/arch/arm/mach-footbridge/isa-irq.c
@@ -96,11 +96,6 @@ static void isa_irq_handler(struct irq_desc *desc)
 	generic_handle_irq(isa_irq);
 }
 
-static struct irqaction irq_cascade = {
-	.handler = no_action,
-	.name = "cascade",
-};
-
 static struct resource pic1_resource = {
 	.name	= "pic1",
 	.start	= 0x20,
@@ -160,7 +155,10 @@ void __init isa_init_irq(unsigned int host_irq)
 
 		request_resource(&ioport_resource, &pic1_resource);
 		request_resource(&ioport_resource, &pic2_resource);
-		setup_irq(IRQ_ISA_CASCADE, &irq_cascade);
+
+		irq = IRQ_ISA_CASCADE;
+		if (request_irq(irq, no_action, 0, "cascade", NULL))
+			pr_err("Failed to request irq %u (cascade)\n", irq);
 
 		irq_set_chained_handler(host_irq, isa_irq_handler);
 
diff --git a/arch/arm/mach-footbridge/isa-timer.c b/arch/arm/mach-footbridge/isa-timer.c
index 82f4559..723e3ea 100644
--- a/arch/arm/mach-footbridge/isa-timer.c
+++ b/arch/arm/mach-footbridge/isa-timer.c
@@ -25,17 +25,12 @@ static irqreturn_t pit_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction pit_timer_irq = {
-	.name		= "pit",
-	.handler	= pit_timer_interrupt,
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.dev_id		= &i8253_clockevent,
-};
-
 void __init isa_timer_init(void)
 {
 	clocksource_i8253_init();
 
-	setup_irq(i8253_clockevent.irq, &pit_timer_irq);
+	if (request_irq(i8253_clockevent.irq, pit_timer_interrupt,
+			IRQF_TIMER | IRQF_IRQPOLL, "pit", &i8253_clockevent))
+		pr_err("Failed to request irq %d(pit)\n", i8253_clockevent.irq);
 	clockevent_i8253_init(false);
 }
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 95584ee..e7d7b90 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -471,8 +471,6 @@
 config SOC_IMX6
 	bool
 	select ARM_CPU_SUSPEND if (PM || CPU_IDLE)
-	select ARM_ERRATA_754322
-	select ARM_ERRATA_775420
 	select ARM_GIC
 	select HAVE_IMX_ANATOP
 	select HAVE_IMX_GPC
@@ -484,6 +482,8 @@
 config SOC_IMX6Q
 	bool "i.MX6 Quad/DualLite support"
 	select ARM_ERRATA_764369 if SMP
+	select ARM_ERRATA_754322
+	select ARM_ERRATA_775420
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD
 	select PINCTRL_IMX6Q
@@ -494,6 +494,8 @@
 
 config SOC_IMX6SL
 	bool "i.MX6 SoloLite support"
+	select ARM_ERRATA_754322
+	select ARM_ERRATA_775420
 	select PINCTRL_IMX6SL
 	select SOC_IMX6
 
@@ -502,6 +504,8 @@
 
 config SOC_IMX6SLL
 	bool "i.MX6 SoloLiteLite support"
+	select ARM_ERRATA_754322
+	select ARM_ERRATA_775420
 	select PINCTRL_IMX6SLL
 	select SOC_IMX6
 
@@ -510,6 +514,8 @@
 
 config SOC_IMX6SX
 	bool "i.MX6 SoloX support"
+	select ARM_ERRATA_754322
+	select ARM_ERRATA_775420
 	select PINCTRL_IMX6SX
 	select SOC_IMX6
 
diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c
index 8fb68c0..d841bed 100644
--- a/arch/arm/mach-imx/anatop.c
+++ b/arch/arm/mach-imx/anatop.c
@@ -89,12 +89,11 @@ void imx_anatop_post_resume(void)
 
 	if (cpu_is_imx6sl())
 		imx_anatop_disconnect_high_snvs(false);
-
 }
 
 void __init imx_init_revision_from_anatop(void)
 {
-	struct device_node *np;
+	struct device_node *np, *src_np;
 	void __iomem *anatop_base;
 	unsigned int revision;
 	u32 digprog;
@@ -135,9 +134,10 @@ void __init imx_init_revision_from_anatop(void)
 			void __iomem *src_base;
 			u32 sbmr2;
 
-			np = of_find_compatible_node(NULL, NULL,
+			src_np = of_find_compatible_node(NULL, NULL,
 						     "fsl,imx6ul-src");
 			src_base = of_iomap(np, 0);
+			of_node_put(src_np);
 			WARN_ON(!src_base);
 			sbmr2 = readl_relaxed(src_base + SRC_SBMR2);
 			iounmap(src_base);
@@ -149,6 +149,7 @@ void __init imx_init_revision_from_anatop(void)
 			}
 		}
 	}
+	of_node_put(np);
 
 	mxc_set_cpu_type(digprog >> 16 & 0xff);
 	imx_set_soc_revision(revision);
diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c
index b5b557f..ebc4339 100644
--- a/arch/arm/mach-imx/gpc.c
+++ b/arch/arm/mach-imx/gpc.c
@@ -10,7 +10,7 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
-#include <linux/irqchip/arm-gic.h>
+
 #include "common.h"
 #include "hardware.h"
 
@@ -111,7 +111,6 @@ void imx_gpc_mask_all(void)
 		gpc_saved_imrs[i] = readl_relaxed(reg_imr1 + i * 4);
 		writel_relaxed(~0, reg_imr1 + i * 4);
 	}
-
 }
 
 void imx_gpc_restore_all(void)
@@ -282,4 +281,5 @@ void __init imx_gpc_check_dt(void)
 		/* map GPC, so that at least CPUidle and WARs keep working */
 		gpc_base = of_iomap(np, 0);
 	}
+	of_node_put(np);
 }
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index edd26e0..284bce1 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -5,29 +5,16 @@
  */
 
 #include <linux/clk.h>
-#include <linux/clkdev.h>
-#include <linux/cpu.h>
-#include <linux/delay.h>
-#include <linux/export.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irq.h>
 #include <linux/irqchip.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
 #include <linux/of_platform.h>
-#include <linux/pm_opp.h>
 #include <linux/pci.h>
 #include <linux/phy.h>
-#include <linux/reboot.h>
 #include <linux/regmap.h>
 #include <linux/micrel_phy.h>
 #include <linux/mfd/syscon.h>
 #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/system_misc.h>
 
 #include "common.h"
 #include "cpuidle.h"
diff --git a/arch/arm/mach-imx/mach-imx6sl.c b/arch/arm/mach-imx/mach-imx6sl.c
index e00818a..e27a688 100644
--- a/arch/arm/mach-imx/mach-imx6sl.c
+++ b/arch/arm/mach-imx/mach-imx6sl.c
@@ -4,7 +4,6 @@
  */
 
 #include <linux/irqchip.h>
-#include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/mfd/syscon.h>
 #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
diff --git a/arch/arm/mach-imx/mach-imx6ul.c b/arch/arm/mach-imx/mach-imx6ul.c
index 311f5e4..3b0e16c 100644
--- a/arch/arm/mach-imx/mach-imx6ul.c
+++ b/arch/arm/mach-imx/mach-imx6ul.c
@@ -25,7 +25,6 @@ static void __init imx6ul_enet_clk_init(void)
 				   IMX6UL_GPR1_ENET_CLK_OUTPUT);
 	else
 		pr_err("failed to find fsl,imx6ul-iomux-gpr regmap\n");
-
 }
 
 static int ksz8081_phy_fixup(struct phy_device *dev)
diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c
index 2aa2692..cf4e933 100644
--- a/arch/arm/mach-imx/platsmp.c
+++ b/arch/arm/mach-imx/platsmp.c
@@ -109,6 +109,7 @@ static void __init ls1021a_smp_prepare_cpus(unsigned int max_cpus)
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,ls1021a-dcfg");
 	dcfg_base = of_iomap(np, 0);
+	of_node_put(np);
 	BUG_ON(!dcfg_base);
 
 	paddr = __pa_symbol(secondary_startup);
diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c
index 1c0ecad..dd34dff 100644
--- a/arch/arm/mach-imx/pm-imx6.c
+++ b/arch/arm/mach-imx/pm-imx6.c
@@ -655,6 +655,8 @@ void __init imx6_pm_ccm_init(const char *ccm_compat)
 
 	if (of_property_read_bool(np, "fsl,pmic-stby-poweroff"))
 		imx6_pm_stby_poweroff_probe();
+
+	of_node_put(np);
 }
 
 void __init imx6q_pm_init(void)
diff --git a/arch/arm/mach-imx/pm-imx7ulp.c b/arch/arm/mach-imx/pm-imx7ulp.c
index 7b2f738..2e756d8 100644
--- a/arch/arm/mach-imx/pm-imx7ulp.c
+++ b/arch/arm/mach-imx/pm-imx7ulp.c
@@ -62,6 +62,7 @@ void __init imx7ulp_pm_init(void)
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx7ulp-smc1");
 	smc1_base = of_iomap(np, 0);
+	of_node_put(np);
 	WARN_ON(!smc1_base);
 
 	imx7ulp_set_lpm(ULP_PM_RUN);
diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c
index 0beea6d..f52f371 100644
--- a/arch/arm/mach-imx/src.c
+++ b/arch/arm/mach-imx/src.c
@@ -43,9 +43,6 @@ static int imx_src_reset_module(struct reset_controller_dev *rcdev,
 	int bit;
 	u32 val;
 
-	if (!src_base)
-		return -ENODEV;
-
 	if (sw_reset_idx >= ARRAY_SIZE(sw_reset_bits))
 		return -EINVAL;
 
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index 1ecbea5..6f875de 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -410,13 +410,10 @@ static int __ref impd1_probe(struct lm_device *dev)
 			 * 5 = Key lower right
 			 */
 			/* We need the two MMCI GPIO entries */
-			lookup->table[0].chip_label = chipname;
-			lookup->table[0].chip_hwnum = 3;
-			lookup->table[0].con_id = "wp";
-			lookup->table[1].chip_label = chipname;
-			lookup->table[1].chip_hwnum = 4;
-			lookup->table[1].con_id = "cd";
-			lookup->table[1].flags = GPIO_ACTIVE_LOW;
+			lookup->table[0] = (struct gpiod_lookup)
+				GPIO_LOOKUP(chipname, 3, "wp", 0);
+			lookup->table[1] = (struct gpiod_lookup)
+				GPIO_LOOKUP(chipname, 4, "cd", GPIO_ACTIVE_LOW);
 			gpiod_add_lookup_table(lookup);
 		}
 
diff --git a/arch/arm/mach-iop32x/time.c b/arch/arm/mach-iop32x/time.c
index 18a4df5..ae533b6 100644
--- a/arch/arm/mach-iop32x/time.c
+++ b/arch/arm/mach-iop32x/time.c
@@ -137,13 +137,6 @@ iop_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction iop_timer_irq = {
-	.name		= "IOP Timer Tick",
-	.handler	= iop_timer_interrupt,
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.dev_id		= &iop_clockevent,
-};
-
 static unsigned long iop_tick_rate;
 unsigned long get_iop_tick_rate(void)
 {
@@ -154,6 +147,7 @@ EXPORT_SYMBOL(get_iop_tick_rate);
 void __init iop_init_time(unsigned long tick_rate)
 {
 	u32 timer_ctl;
+	int irq = IRQ_IOP32X_TIMER0;
 
 	sched_clock_register(iop_read_sched_clock, 32, tick_rate);
 
@@ -168,7 +162,9 @@ void __init iop_init_time(unsigned long tick_rate)
 	 */
 	write_tmr0(timer_ctl & ~IOP_TMR_EN);
 	write_tisr(1);
-	setup_irq(IRQ_IOP32X_TIMER0, &iop_timer_irq);
+	if (request_irq(irq, iop_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
+			"IOP Timer Tick", &iop_clockevent))
+		pr_err("Failed to request irq() %d (IOP Timer Tick)\n", irq);
 	iop_clockevent.cpumask = cpumask_of(0);
 	clockevents_config_and_register(&iop_clockevent, tick_rate,
 					0xf, 0xfffffffe);
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index c65cfc1..049a65f 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -175,13 +175,6 @@ static void __init timer_config(void)
 	__raw_writel(0x2, mmp_timer_base + TMR_CER);
 }
 
-static struct irqaction timer_irq = {
-	.name		= "timer",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= timer_interrupt,
-	.dev_id		= &ckevt,
-};
-
 void __init mmp_timer_init(int irq, unsigned long rate)
 {
 	timer_config();
@@ -190,7 +183,9 @@ void __init mmp_timer_init(int irq, unsigned long rate)
 
 	ckevt.cpumask = cpumask_of(0);
 
-	setup_irq(irq, &timer_irq);
+	if (request_irq(irq, timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
+			"timer", &ckevt))
+		pr_err("Failed to request irq %d (timer)\n", irq);
 
 	clocksource_register_hz(&cksrc, rate);
 	clockevents_config_and_register(&ckevt, rate, MIN_DELTA, MAX_DELTA);
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index a2aa7a1..8d32894 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -17,6 +17,8 @@
 #include <linux/input.h>
 #include <linux/interrupt.h>
 #include <linux/leds.h>
+#include <linux/mtd/nand-gpio.h>
+#include <linux/mtd/partitions.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 #include <linux/regulator/fixed.h>
@@ -294,9 +296,42 @@ struct modem_private_data {
 
 static struct modem_private_data modem_priv;
 
+/*
+ * Define partitions for flash device
+ */
+
+static struct mtd_partition partition_info[] = {
+	{ .name		= "Kernel",
+	  .offset	= 0,
+	  .size		= 3 * SZ_1M + SZ_512K },
+	{ .name		= "u-boot",
+	  .offset	= 3 * SZ_1M + SZ_512K,
+	  .size		= SZ_256K },
+	{ .name		= "u-boot params",
+	  .offset	= 3 * SZ_1M + SZ_512K + SZ_256K,
+	  .size		= SZ_256K },
+	{ .name		= "Amstrad LDR",
+	  .offset	= 4 * SZ_1M,
+	  .size		= SZ_256K },
+	{ .name		= "File system",
+	  .offset	= 4 * SZ_1M + 1 * SZ_256K,
+	  .size		= 27 * SZ_1M },
+	{ .name		= "PBL reserved",
+	  .offset	= 32 * SZ_1M - 3 * SZ_256K,
+	  .size		=  3 * SZ_256K },
+};
+
+static struct gpio_nand_platdata nand_platdata = {
+	.parts		= partition_info,
+	.num_parts	= ARRAY_SIZE(partition_info),
+};
+
 static struct platform_device ams_delta_nand_device = {
 	.name	= "ams-delta-nand",
 	.id	= -1,
+	.dev	= {
+		.platform_data = &nand_platdata,
+	},
 };
 
 #define OMAP_GPIO_LABEL		"gpio-0-15"
@@ -306,10 +341,14 @@ static struct gpiod_lookup_table ams_delta_nand_gpio_table = {
 	.table = {
 		GPIO_LOOKUP(OMAP_GPIO_LABEL, AMS_DELTA_GPIO_PIN_NAND_RB, "rdy",
 			    0),
-		GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_NCE, "nce", 0),
-		GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_NRE, "nre", 0),
-		GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_NWP, "nwp", 0),
-		GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_NWE, "nwe", 0),
+		GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_NCE, "nce",
+			    GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_NRE, "nre",
+			    GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_NWP, "nwp",
+			    GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_NWE, "nwe",
+			    GPIO_ACTIVE_LOW),
 		GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_ALE, "ale", 0),
 		GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_CLE, "cle", 0),
 		GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 0, "data", 0, 0),
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index d068958..2c1e2b3 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -596,11 +596,6 @@ static irqreturn_t omap_wakeup_interrupt(int irq, void *dev)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction omap_wakeup_irq = {
-	.name		= "peripheral wakeup",
-	.handler	= omap_wakeup_interrupt
-};
-
 
 
 static const struct platform_suspend_ops omap_pm_ops = {
@@ -613,6 +608,7 @@ static const struct platform_suspend_ops omap_pm_ops = {
 static int __init omap_pm_init(void)
 {
 	int error = 0;
+	int irq;
 
 	if (!cpu_class_is_omap1())
 		return -ENODEV;
@@ -656,9 +652,12 @@ static int __init omap_pm_init(void)
 	arm_pm_idle = omap1_pm_idle;
 
 	if (cpu_is_omap7xx())
-		setup_irq(INT_7XX_WAKE_UP_REQ, &omap_wakeup_irq);
+		irq = INT_7XX_WAKE_UP_REQ;
 	else if (cpu_is_omap16xx())
-		setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq);
+		irq = INT_1610_WAKE_UP_REQ;
+	if (request_irq(irq, omap_wakeup_interrupt, 0, "peripheral wakeup",
+			NULL))
+		pr_err("Failed to request irq %d (peripheral wakeup)\n", irq);
 
 	/* Program new power ramp-up time
 	 * (0 for most boards since we don't lower voltage when in deep sleep)
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index 524977a..de590a8 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -155,15 +155,11 @@ static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction omap_mpu_timer1_irq = {
-	.name		= "mpu_timer1",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= omap_mpu_timer1_interrupt,
-};
-
 static __init void omap_init_mpu_timer(unsigned long rate)
 {
-	setup_irq(INT_TIMER1, &omap_mpu_timer1_irq);
+	if (request_irq(INT_TIMER1, omap_mpu_timer1_interrupt,
+			IRQF_TIMER | IRQF_IRQPOLL, "mpu_timer1", NULL))
+		pr_err("Failed to request irq %d (mpu_timer1)\n", INT_TIMER1);
 	omap_mpu_timer_start(0, (rate / HZ) - 1, 1);
 
 	clockevent_mpu_timer1.cpumask = cpumask_of(0);
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index 0ae6c52..780fdf0 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -148,15 +148,11 @@ static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction omap_32k_timer_irq = {
-	.name		= "32KHz timer",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= omap_32k_timer_interrupt,
-};
-
 static __init void omap_init_32k_timer(void)
 {
-	setup_irq(INT_OS_TIMER, &omap_32k_timer_irq);
+	if (request_irq(INT_OS_TIMER, omap_32k_timer_interrupt,
+			IRQF_TIMER | IRQF_IRQPOLL, "32KHz timer", NULL))
+		pr_err("Failed to request irq %d(32KHz timer)\n", INT_OS_TIMER);
 
 	clockevent_32k_timer.cpumask = cpumask_of(0);
 	clockevents_config_and_register(&clockevent_32k_timer,
diff --git a/arch/arm/mach-omap2/.gitignore b/arch/arm/mach-omap2/.gitignore
index 79a8d6e..dc7be75 100644
--- a/arch/arm/mach-omap2/.gitignore
+++ b/arch/arm/mach-omap2/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 pm-asm-offsets.h
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index 532a3e4..090a8aa 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -109,6 +109,7 @@ static int omap3_enter_idle(struct cpuidle_device *dev,
 			    int index)
 {
 	struct omap3_idle_statedata *cx = &omap3_idle_data[index];
+	int error;
 
 	if (omap_irq_pending() || need_resched())
 		goto return_sleep_time;
@@ -125,8 +126,11 @@ static int omap3_enter_idle(struct cpuidle_device *dev,
 	 * Call idle CPU PM enter notifier chain so that
 	 * VFP context is saved.
 	 */
-	if (cx->mpu_state == PWRDM_POWER_OFF)
-		cpu_pm_enter();
+	if (cx->mpu_state == PWRDM_POWER_OFF) {
+		error = cpu_pm_enter();
+		if (error)
+			goto out_clkdm_set;
+	}
 
 	/* Execute ARM wfi */
 	omap_sram_idle();
@@ -139,6 +143,7 @@ static int omap3_enter_idle(struct cpuidle_device *dev,
 	    pwrdm_read_prev_pwrst(mpu_pd) == PWRDM_POWER_OFF)
 		cpu_pm_exit();
 
+out_clkdm_set:
 	/* Re-allow idle for C1 */
 	if (cx->flags & OMAP_CPUIDLE_CX_NO_CLKDM_IDLE)
 		clkdm_allow_idle(mpu_pd->pwrdm_clkdms[0]);
diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
index fe75d4f..6f5f897 100644
--- a/arch/arm/mach-omap2/cpuidle44xx.c
+++ b/arch/arm/mach-omap2/cpuidle44xx.c
@@ -122,6 +122,7 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 {
 	struct idle_statedata *cx = state_ptr + index;
 	u32 mpuss_can_lose_context = 0;
+	int error;
 
 	/*
 	 * CPU0 has to wait and stay ON until CPU1 is OFF state.
@@ -159,7 +160,9 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 	 * Call idle CPU PM enter notifier chain so that
 	 * VFP and per CPU interrupt context is saved.
 	 */
-	cpu_pm_enter();
+	error = cpu_pm_enter();
+	if (error)
+		goto cpu_pm_out;
 
 	if (dev->cpu == 0) {
 		pwrdm_set_logic_retst(mpu_pd, cx->mpu_logic_state);
@@ -169,13 +172,17 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 		 * Call idle CPU cluster PM enter notifier chain
 		 * to save GIC and wakeupgen context.
 		 */
-		if (mpuss_can_lose_context)
-			cpu_cluster_pm_enter();
+		if (mpuss_can_lose_context) {
+			error = cpu_cluster_pm_enter();
+			if (error)
+				goto cpu_cluster_pm_out;
+		}
 	}
 
 	omap4_enter_lowpower(dev->cpu, cx->cpu_state);
 	cpu_done[dev->cpu] = true;
 
+cpu_cluster_pm_out:
 	/* Wakeup CPU1 only if it is not offlined */
 	if (dev->cpu == 0 && cpumask_test_cpu(1, cpu_online_mask)) {
 
@@ -198,18 +205,19 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 	}
 
 	/*
-	 * Call idle CPU PM exit notifier chain to restore
-	 * VFP and per CPU IRQ context.
-	 */
-	cpu_pm_exit();
-
-	/*
 	 * Call idle CPU cluster PM exit notifier chain
 	 * to restore GIC and wakeupgen context.
 	 */
 	if (dev->cpu == 0 && mpuss_can_lose_context)
 		cpu_cluster_pm_exit();
 
+	/*
+	 * Call idle CPU PM exit notifier chain to restore
+	 * VFP and per CPU IRQ context.
+	 */
+	cpu_pm_exit();
+
+cpu_pm_out:
 	tick_broadcast_exit();
 
 fail:
diff --git a/arch/arm/mach-omap2/omap-secure.c b/arch/arm/mach-omap2/omap-secure.c
index d00e3c7..f70d561 100644
--- a/arch/arm/mach-omap2/omap-secure.c
+++ b/arch/arm/mach-omap2/omap-secure.c
@@ -5,7 +5,7 @@
  * Copyright (C) 2011 Texas Instruments, Inc.
  *	Santosh Shilimkar <santosh.shilimkar@ti.com>
  * Copyright (C) 2012 Ivaylo Dimitrov <freemangordon@abv.bg>
- * Copyright (C) 2013 Pali Rohár <pali.rohar@gmail.com>
+ * Copyright (C) 2013 Pali Rohár <pali@kernel.org>
  */
 
 #include <linux/arm-smccc.h>
diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h
index ba8c486..4aaa957 100644
--- a/arch/arm/mach-omap2/omap-secure.h
+++ b/arch/arm/mach-omap2/omap-secure.h
@@ -5,7 +5,7 @@
  * Copyright (C) 2011 Texas Instruments, Inc.
  *	Santosh Shilimkar <santosh.shilimkar@ti.com>
  * Copyright (C) 2012 Ivaylo Dimitrov <freemangordon@abv.bg>
- * Copyright (C) 2013 Pali Rohár <pali.rohar@gmail.com>
+ * Copyright (C) 2013 Pali Rohár <pali@kernel.org>
  */
 #ifndef OMAP_ARCH_OMAP_SECURE_H
 #define OMAP_ARCH_OMAP_SECURE_H
diff --git a/arch/arm/mach-omap2/omap-smc.S b/arch/arm/mach-omap2/omap-smc.S
index d483284..7376f52 100644
--- a/arch/arm/mach-omap2/omap-smc.S
+++ b/arch/arm/mach-omap2/omap-smc.S
@@ -6,7 +6,7 @@
  * Written by Santosh Shilimkar <santosh.shilimkar@ti.com>
  *
  * Copyright (C) 2012 Ivaylo Dimitrov <freemangordon@abv.bg>
- * Copyright (C) 2013 Pali Rohár <pali.rohar@gmail.com>
+ * Copyright (C) 2013 Pali Rohár <pali@kernel.org>
  */
 
 #include <linux/linkage.h>
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 17d337e..82706af 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -3148,15 +3148,14 @@ static int omap_hwmod_check_sysc(struct device *dev,
 /**
  * omap_hwmod_init_regbits - init sysconfig specific register bits
  * @dev: struct device
+ * @oh: module
  * @data: module data
  * @sysc_fields: new sysc configuration
  */
-static int omap_hwmod_init_regbits(struct device *dev,
+static int omap_hwmod_init_regbits(struct device *dev, struct omap_hwmod *oh,
 				   const struct ti_sysc_module_data *data,
 				   struct sysc_regbits **sysc_fields)
 {
-	*sysc_fields = NULL;
-
 	switch (data->cap->type) {
 	case TI_SYSC_OMAP2:
 	case TI_SYSC_OMAP2_TIMER:
@@ -3191,6 +3190,12 @@ static int omap_hwmod_init_regbits(struct device *dev,
 		*sysc_fields = &omap_hwmod_sysc_type_usb_host_fs;
 		break;
 	default:
+		*sysc_fields = NULL;
+		if (!oh->class->sysc->sysc_fields)
+			return 0;
+
+		dev_err(dev, "sysc_fields not found\n");
+
 		return -EINVAL;
 	}
 
@@ -3356,9 +3361,9 @@ static int omap_hwmod_check_module(struct device *dev,
 	if (!oh->class->sysc)
 		return -ENODEV;
 
-	if (sysc_fields != oh->class->sysc->sysc_fields)
-		dev_warn(dev, "sysc_fields %p != %p\n", sysc_fields,
-			 oh->class->sysc->sysc_fields);
+	if (oh->class->sysc->sysc_fields &&
+	    sysc_fields != oh->class->sysc->sysc_fields)
+		dev_warn(dev, "sysc_fields mismatch\n");
 
 	if (rev_offs != oh->class->sysc->rev_offs)
 		dev_warn(dev, "rev_offs %08x != %08x\n", rev_offs,
@@ -3574,7 +3579,7 @@ int omap_hwmod_init_module(struct device *dev,
 
 	cookie->data = oh;
 
-	error = omap_hwmod_init_regbits(dev, data, &sysc_fields);
+	error = omap_hwmod_init_regbits(dev, oh, data, &sysc_fields);
 	if (error)
 		return error;
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h
index 5ef76fe..fa2ff41 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h
@@ -24,16 +24,11 @@ extern struct omap_hwmod_ocp_if am33xx_l3_s__l4_wkup;
 extern struct omap_hwmod_ocp_if am33xx_l3_main__l3_instr;
 extern struct omap_hwmod_ocp_if am33xx_mpu__prcm;
 extern struct omap_hwmod_ocp_if am33xx_l3_s__l3_main;
-extern struct omap_hwmod_ocp_if am33xx_pruss__l3_main;
 extern struct omap_hwmod_ocp_if am33xx_gfx__l3_main;
 extern struct omap_hwmod_ocp_if am33xx_l3_main__gfx;
 extern struct omap_hwmod_ocp_if am33xx_l4_wkup__rtc;
 extern struct omap_hwmod_ocp_if am33xx_l3_s__gpmc;
 extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer2;
-extern struct omap_hwmod_ocp_if am33xx_l3_main__tpcc;
-extern struct omap_hwmod_ocp_if am33xx_l3_main__tptc0;
-extern struct omap_hwmod_ocp_if am33xx_l3_main__tptc1;
-extern struct omap_hwmod_ocp_if am33xx_l3_main__tptc2;
 extern struct omap_hwmod_ocp_if am33xx_l3_main__ocmc;
 
 extern struct omap_hwmod am33xx_l3_main_hwmod;
@@ -42,7 +37,6 @@ extern struct omap_hwmod am33xx_l3_instr_hwmod;
 extern struct omap_hwmod am33xx_l4_ls_hwmod;
 extern struct omap_hwmod am33xx_l4_wkup_hwmod;
 extern struct omap_hwmod am33xx_mpu_hwmod;
-extern struct omap_hwmod am33xx_pruss_hwmod;
 extern struct omap_hwmod am33xx_gfx_hwmod;
 extern struct omap_hwmod am33xx_prcm_hwmod;
 extern struct omap_hwmod am33xx_ocmcram_hwmod;
@@ -52,10 +46,6 @@ extern struct omap_hwmod am33xx_gpmc_hwmod;
 extern struct omap_hwmod am33xx_rtc_hwmod;
 extern struct omap_hwmod am33xx_timer1_hwmod;
 extern struct omap_hwmod am33xx_timer2_hwmod;
-extern struct omap_hwmod am33xx_tpcc_hwmod;
-extern struct omap_hwmod am33xx_tptc0_hwmod;
-extern struct omap_hwmod am33xx_tptc1_hwmod;
-extern struct omap_hwmod am33xx_tptc2_hwmod;
 
 extern struct omap_hwmod_class am33xx_emif_hwmod_class;
 extern struct omap_hwmod_class am33xx_l4_hwmod_class;
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
index ac7d5bb..0ebbfbb 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
@@ -74,14 +74,6 @@ struct omap_hwmod_ocp_if am33xx_l3_s__l3_main = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* pru-icss -> l3 main */
-struct omap_hwmod_ocp_if am33xx_pruss__l3_main = {
-	.master		= &am33xx_pruss_hwmod,
-	.slave		= &am33xx_l3_main_hwmod,
-	.clk		= "l3_gclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* gfx -> l3 main */
 struct omap_hwmod_ocp_if am33xx_gfx__l3_main = {
 	.master		= &am33xx_gfx_hwmod,
@@ -122,38 +114,6 @@ struct omap_hwmod_ocp_if am33xx_l4_ls__timer2 = {
 	.user		= OCP_USER_MPU,
 };
 
-/* l3 main -> tpcc */
-struct omap_hwmod_ocp_if am33xx_l3_main__tpcc = {
-	.master		= &am33xx_l3_main_hwmod,
-	.slave		= &am33xx_tpcc_hwmod,
-	.clk		= "l3_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l3 main -> tpcc0 */
-struct omap_hwmod_ocp_if am33xx_l3_main__tptc0 = {
-	.master		= &am33xx_l3_main_hwmod,
-	.slave		= &am33xx_tptc0_hwmod,
-	.clk		= "l3_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l3 main -> tpcc1 */
-struct omap_hwmod_ocp_if am33xx_l3_main__tptc1 = {
-	.master		= &am33xx_l3_main_hwmod,
-	.slave		= &am33xx_tptc1_hwmod,
-	.clk		= "l3_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l3 main -> tpcc2 */
-struct omap_hwmod_ocp_if am33xx_l3_main__tptc2 = {
-	.master		= &am33xx_l3_main_hwmod,
-	.slave		= &am33xx_tptc2_hwmod,
-	.clk		= "l3_gclk",
-	.user		= OCP_USER_MPU,
-};
-
 /* l3 main -> ocmc */
 struct omap_hwmod_ocp_if am33xx_l3_main__ocmc = {
 	.master		= &am33xx_l3_main_hwmod,
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
index 78ec1bc..dca5a3a 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
@@ -133,34 +133,6 @@ struct omap_hwmod_class am33xx_wkup_m3_hwmod_class = {
 	.name		= "wkup_m3",
 };
 
-/*
- * 'pru-icss' class
- * Programmable Real-Time Unit and Industrial Communication Subsystem
- */
-static struct omap_hwmod_class am33xx_pruss_hwmod_class = {
-	.name	= "pruss",
-};
-
-static struct omap_hwmod_rst_info am33xx_pruss_resets[] = {
-	{ .name = "pruss", .rst_shift = 1 },
-};
-
-/* pru-icss */
-/* Pseudo hwmod for reset control purpose only */
-struct omap_hwmod am33xx_pruss_hwmod = {
-	.name		= "pruss",
-	.class		= &am33xx_pruss_hwmod_class,
-	.clkdm_name	= "pruss_ocp_clkdm",
-	.main_clk	= "pruss_ocp_gclk",
-	.prcm		= {
-		.omap4	= {
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-	.rst_lines	= am33xx_pruss_resets,
-	.rst_lines_cnt	= ARRAY_SIZE(am33xx_pruss_resets),
-};
-
 /* gfx */
 /* Pseudo hwmod for reset control purpose only */
 static struct omap_hwmod_class am33xx_gfx_hwmod_class = {
@@ -393,80 +365,6 @@ struct omap_hwmod am33xx_timer2_hwmod = {
 	},
 };
 
-/* tpcc */
-static struct omap_hwmod_class am33xx_tpcc_hwmod_class = {
-	.name		= "tpcc",
-};
-
-struct omap_hwmod am33xx_tpcc_hwmod = {
-	.name		= "tpcc",
-	.class		= &am33xx_tpcc_hwmod_class,
-	.clkdm_name	= "l3_clkdm",
-	.main_clk	= "l3_gclk",
-	.prcm		= {
-		.omap4	= {
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod_class_sysconfig am33xx_tptc_sysc = {
-	.rev_offs	= 0x0,
-	.sysc_offs	= 0x10,
-	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
-			  SYSC_HAS_MIDLEMODE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_SMART | MSTANDBY_FORCE),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-/* 'tptc' class */
-static struct omap_hwmod_class am33xx_tptc_hwmod_class = {
-	.name		= "tptc",
-	.sysc		= &am33xx_tptc_sysc,
-};
-
-/* tptc0 */
-struct omap_hwmod am33xx_tptc0_hwmod = {
-	.name		= "tptc0",
-	.class		= &am33xx_tptc_hwmod_class,
-	.clkdm_name	= "l3_clkdm",
-	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
-	.main_clk	= "l3_gclk",
-	.prcm		= {
-		.omap4	= {
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* tptc1 */
-struct omap_hwmod am33xx_tptc1_hwmod = {
-	.name		= "tptc1",
-	.class		= &am33xx_tptc_hwmod_class,
-	.clkdm_name	= "l3_clkdm",
-	.flags		= (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY),
-	.main_clk	= "l3_gclk",
-	.prcm		= {
-		.omap4	= {
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* tptc2 */
-struct omap_hwmod am33xx_tptc2_hwmod = {
-	.name		= "tptc2",
-	.class		= &am33xx_tptc_hwmod_class,
-	.clkdm_name	= "l3_clkdm",
-	.flags		= (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY),
-	.main_clk	= "l3_gclk",
-	.prcm		= {
-		.omap4	= {
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
 static void omap_hwmod_am33xx_clkctrl(void)
 {
 	CLKCTRL(am33xx_timer2_hwmod, AM33XX_CM_PER_TIMER2_CLKCTRL_OFFSET);
@@ -481,12 +379,7 @@ static void omap_hwmod_am33xx_clkctrl(void)
 	CLKCTRL(am33xx_l4_ls_hwmod, AM33XX_CM_PER_L4LS_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_l4_wkup_hwmod, AM33XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_l3_main_hwmod, AM33XX_CM_PER_L3_CLKCTRL_OFFSET);
-	CLKCTRL(am33xx_tpcc_hwmod, AM33XX_CM_PER_TPCC_CLKCTRL_OFFSET);
-	CLKCTRL(am33xx_tptc0_hwmod, AM33XX_CM_PER_TPTC0_CLKCTRL_OFFSET);
-	CLKCTRL(am33xx_tptc1_hwmod, AM33XX_CM_PER_TPTC1_CLKCTRL_OFFSET);
-	CLKCTRL(am33xx_tptc2_hwmod, AM33XX_CM_PER_TPTC2_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_gfx_hwmod, AM33XX_CM_GFX_GFX_CLKCTRL_OFFSET);
-	CLKCTRL(am33xx_pruss_hwmod, AM33XX_CM_PER_PRUSS_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_mpu_hwmod , AM33XX_CM_MPU_MPU_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_l3_instr_hwmod , AM33XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_ocmcram_hwmod , AM33XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET);
@@ -494,7 +387,6 @@ static void omap_hwmod_am33xx_clkctrl(void)
 
 static void omap_hwmod_am33xx_rst(void)
 {
-	RSTCTRL(am33xx_pruss_hwmod, AM33XX_RM_PER_RSTCTRL_OFFSET);
 	RSTCTRL(am33xx_gfx_hwmod, AM33XX_RM_GFX_RSTCTRL_OFFSET);
 	RSTST(am33xx_gfx_hwmod, AM33XX_RM_GFX_RSTST_OFFSET);
 }
@@ -518,12 +410,7 @@ static void omap_hwmod_am43xx_clkctrl(void)
 	CLKCTRL(am33xx_l4_ls_hwmod, AM43XX_CM_PER_L4LS_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_l4_wkup_hwmod, AM43XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_l3_main_hwmod, AM43XX_CM_PER_L3_CLKCTRL_OFFSET);
-	CLKCTRL(am33xx_tpcc_hwmod, AM43XX_CM_PER_TPCC_CLKCTRL_OFFSET);
-	CLKCTRL(am33xx_tptc0_hwmod, AM43XX_CM_PER_TPTC0_CLKCTRL_OFFSET);
-	CLKCTRL(am33xx_tptc1_hwmod, AM43XX_CM_PER_TPTC1_CLKCTRL_OFFSET);
-	CLKCTRL(am33xx_tptc2_hwmod, AM43XX_CM_PER_TPTC2_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_gfx_hwmod, AM43XX_CM_GFX_GFX_CLKCTRL_OFFSET);
-	CLKCTRL(am33xx_pruss_hwmod, AM43XX_CM_PER_PRUSS_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_mpu_hwmod , AM43XX_CM_MPU_MPU_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_l3_instr_hwmod , AM43XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_ocmcram_hwmod , AM43XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET);
@@ -531,9 +418,7 @@ static void omap_hwmod_am43xx_clkctrl(void)
 
 static void omap_hwmod_am43xx_rst(void)
 {
-	RSTCTRL(am33xx_pruss_hwmod, AM43XX_RM_PER_RSTCTRL_OFFSET);
 	RSTCTRL(am33xx_gfx_hwmod, AM43XX_RM_GFX_RSTCTRL_OFFSET);
-	RSTST(am33xx_pruss_hwmod, AM43XX_RM_PER_RSTST_OFFSET);
 	RSTST(am33xx_gfx_hwmod, AM43XX_RM_GFX_RSTST_OFFSET);
 }
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
index f1ea8c6..c64b735 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -233,14 +233,6 @@ static struct omap_hwmod_ocp_if am33xx_l4_wkup__wkup_m3 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l4 hs -> pru-icss */
-static struct omap_hwmod_ocp_if am33xx_l4_hs__pruss = {
-	.master		= &am33xx_l4_hs_hwmod,
-	.slave		= &am33xx_pruss_hwmod,
-	.clk		= "dpll_core_m4_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l3_main -> debugss */
 static struct omap_hwmod_ocp_if am33xx_l3_main__debugss = {
 	.master		= &am33xx_l3_main_hwmod,
@@ -292,7 +284,6 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = {
 	&am33xx_l3_main__l3_instr,
 	&am33xx_l3_main__gfx,
 	&am33xx_l3_s__l3_main,
-	&am33xx_pruss__l3_main,
 	&am33xx_wkup_m3__l4_wkup,
 	&am33xx_gfx__l3_main,
 	&am33xx_l3_main__debugss,
@@ -302,13 +293,8 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = {
 	&am33xx_l4_wkup__smartreflex1,
 	&am33xx_l4_wkup__timer1,
 	&am33xx_l4_wkup__rtc,
-	&am33xx_l4_hs__pruss,
 	&am33xx_l4_ls__timer2,
-	&am33xx_l3_main__tpcc,
 	&am33xx_l3_s__gpmc,
-	&am33xx_l3_main__tptc0,
-	&am33xx_l3_main__tptc1,
-	&am33xx_l3_main__tptc2,
 	&am33xx_l3_main__ocmc,
 	NULL,
 };
diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
index d0867db..d2203f4 100644
--- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
@@ -156,75 +156,6 @@ static struct omap_hwmod am43xx_usb_otg_ss1_hwmod = {
 	},
 };
 
-/* dss */
-
-static struct omap_hwmod am43xx_dss_core_hwmod = {
-	.name		= "dss_core",
-	.class		= &omap2_dss_hwmod_class,
-	.clkdm_name	= "dss_clkdm",
-	.main_clk	= "disp_clk",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = AM43XX_CM_PER_DSS_CLKCTRL_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* dispc */
-
-static struct omap_dss_dispc_dev_attr am43xx_dss_dispc_dev_attr = {
-	.manager_count		= 1,
-	.has_framedonetv_irq	= 0
-};
-
-static struct omap_hwmod_class_sysconfig am43xx_dispc_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_SOFTRESET |
-			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_MIDLEMODE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class am43xx_dispc_hwmod_class = {
-	.name	= "dispc",
-	.sysc	= &am43xx_dispc_sysc,
-};
-
-static struct omap_hwmod am43xx_dss_dispc_hwmod = {
-	.name		= "dss_dispc",
-	.class		= &am43xx_dispc_hwmod_class,
-	.clkdm_name	= "dss_clkdm",
-	.main_clk	= "disp_clk",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = AM43XX_CM_PER_DSS_CLKCTRL_OFFSET,
-		},
-	},
-	.dev_attr	= &am43xx_dss_dispc_dev_attr,
-	.parent_hwmod	= &am43xx_dss_core_hwmod,
-};
-
-/* rfbi */
-
-static struct omap_hwmod am43xx_dss_rfbi_hwmod = {
-	.name		= "dss_rfbi",
-	.class		= &omap2_rfbi_hwmod_class,
-	.clkdm_name	= "dss_clkdm",
-	.main_clk	= "disp_clk",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = AM43XX_CM_PER_DSS_CLKCTRL_OFFSET,
-		},
-	},
-	.parent_hwmod	= &am43xx_dss_core_hwmod,
-};
-
-
 /* Interfaces */
 static struct omap_hwmod_ocp_if am43xx_l3_main__emif = {
 	.master		= &am33xx_l3_main_hwmod,
@@ -254,13 +185,6 @@ static struct omap_hwmod_ocp_if am43xx_l4_wkup__wkup_m3 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_ocp_if am43xx_l3_main__pruss = {
-	.master		= &am33xx_l3_main_hwmod,
-	.slave		= &am33xx_pruss_hwmod,
-	.clk		= "dpll_core_m4_ck",
-	.user		= OCP_USER_MPU,
-};
-
 static struct omap_hwmod_ocp_if am43xx_l4_wkup__smartreflex0 = {
 	.master		= &am33xx_l4_wkup_hwmod,
 	.slave		= &am33xx_smartreflex0_hwmod,
@@ -310,37 +234,8 @@ static struct omap_hwmod_ocp_if am43xx_l3_s__usbotgss1 = {
 	.user           = OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_ocp_if am43xx_dss__l3_main = {
-	.master		= &am43xx_dss_core_hwmod,
-	.slave		= &am33xx_l3_main_hwmod,
-	.clk		= "l3_gclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_ocp_if am43xx_l4_ls__dss = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am43xx_dss_core_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_dispc = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am43xx_dss_dispc_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_rfbi = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am43xx_dss_rfbi_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
 	&am33xx_l4_wkup__synctimer,
-	&am43xx_l3_main__pruss,
 	&am33xx_mpu__l3_main,
 	&am33xx_mpu__prcm,
 	&am33xx_l3_s__l4_ls,
@@ -351,7 +246,6 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
 	&am33xx_l3_main__gfx,
 	&am33xx_l3_s__l3_main,
 	&am43xx_l3_main__emif,
-	&am33xx_pruss__l3_main,
 	&am43xx_wkup_m3__l4_wkup,
 	&am33xx_gfx__l3_main,
 	&am43xx_l4_wkup__wkup_m3,
@@ -360,18 +254,10 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
 	&am43xx_l4_wkup__smartreflex1,
 	&am43xx_l4_wkup__timer1,
 	&am33xx_l4_ls__timer2,
-	&am33xx_l3_main__tpcc,
 	&am33xx_l3_s__gpmc,
-	&am33xx_l3_main__tptc0,
-	&am33xx_l3_main__tptc1,
-	&am33xx_l3_main__tptc2,
 	&am33xx_l3_main__ocmc,
 	&am43xx_l3_s__usbotgss0,
 	&am43xx_l3_s__usbotgss1,
-	&am43xx_dss__l3_main,
-	&am43xx_l4_ls__dss,
-	&am43xx_l4_ls__dss_dispc,
-	&am43xx_l4_ls__dss_rfbi,
 	NULL,
 };
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index b7c51ea..33f6596 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -356,306 +356,6 @@ static struct omap_hwmod omap44xx_debugss_hwmod = {
 };
 
 /*
- * 'dsp' class
- * dsp sub-system
- */
-
-static struct omap_hwmod_class omap44xx_dsp_hwmod_class = {
-	.name	= "dsp",
-};
-
-/* dsp */
-static struct omap_hwmod_rst_info omap44xx_dsp_resets[] = {
-	{ .name = "dsp", .rst_shift = 0 },
-};
-
-static struct omap_hwmod omap44xx_dsp_hwmod = {
-	.name		= "dsp",
-	.class		= &omap44xx_dsp_hwmod_class,
-	.clkdm_name	= "tesla_clkdm",
-	.rst_lines	= omap44xx_dsp_resets,
-	.rst_lines_cnt	= ARRAY_SIZE(omap44xx_dsp_resets),
-	.main_clk	= "dpll_iva_m4x2_ck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_TESLA_TESLA_CLKCTRL_OFFSET,
-			.rstctrl_offs = OMAP4_RM_TESLA_RSTCTRL_OFFSET,
-			.context_offs = OMAP4_RM_TESLA_TESLA_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-};
-
-/*
- * 'dss' class
- * display sub-system
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_dss_sysc = {
-	.rev_offs	= 0x0000,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= SYSS_HAS_RESET_STATUS,
-};
-
-static struct omap_hwmod_class omap44xx_dss_hwmod_class = {
-	.name	= "dss",
-	.sysc	= &omap44xx_dss_sysc,
-	.reset	= omap_dss_reset,
-};
-
-/* dss */
-static struct omap_hwmod_opt_clk dss_opt_clks[] = {
-	{ .role = "sys_clk", .clk = "dss_sys_clk" },
-	{ .role = "tv_clk", .clk = "dss_tv_clk" },
-	{ .role = "hdmi_clk", .clk = "dss_48mhz_clk" },
-};
-
-static struct omap_hwmod omap44xx_dss_hwmod = {
-	.name		= "dss_core",
-	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.class		= &omap44xx_dss_hwmod_class,
-	.clkdm_name	= "l3_dss_clkdm",
-	.main_clk	= "dss_dss_clk",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.opt_clks	= dss_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(dss_opt_clks),
-};
-
-/*
- * 'dispc' class
- * display controller
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_dispc_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
-			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_MIDLEMODE |
-			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
-			   SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap44xx_dispc_hwmod_class = {
-	.name	= "dispc",
-	.sysc	= &omap44xx_dispc_sysc,
-};
-
-/* dss_dispc */
-static struct omap_dss_dispc_dev_attr omap44xx_dss_dispc_dev_attr = {
-	.manager_count		= 3,
-	.has_framedonetv_irq	= 1
-};
-
-static struct omap_hwmod omap44xx_dss_dispc_hwmod = {
-	.name		= "dss_dispc",
-	.class		= &omap44xx_dispc_hwmod_class,
-	.clkdm_name	= "l3_dss_clkdm",
-	.main_clk	= "dss_dss_clk",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET,
-		},
-	},
-	.dev_attr	= &omap44xx_dss_dispc_dev_attr,
-	.parent_hwmod	= &omap44xx_dss_hwmod,
-};
-
-/*
- * 'dsi' class
- * display serial interface controller
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_dsi_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
-			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap44xx_dsi_hwmod_class = {
-	.name	= "dsi",
-	.sysc	= &omap44xx_dsi_sysc,
-};
-
-/* dss_dsi1 */
-static struct omap_hwmod_opt_clk dss_dsi1_opt_clks[] = {
-	{ .role = "sys_clk", .clk = "dss_sys_clk" },
-};
-
-static struct omap_hwmod omap44xx_dss_dsi1_hwmod = {
-	.name		= "dss_dsi1",
-	.class		= &omap44xx_dsi_hwmod_class,
-	.clkdm_name	= "l3_dss_clkdm",
-	.main_clk	= "dss_dss_clk",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET,
-		},
-	},
-	.opt_clks	= dss_dsi1_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(dss_dsi1_opt_clks),
-	.parent_hwmod	= &omap44xx_dss_hwmod,
-};
-
-/* dss_dsi2 */
-static struct omap_hwmod_opt_clk dss_dsi2_opt_clks[] = {
-	{ .role = "sys_clk", .clk = "dss_sys_clk" },
-};
-
-static struct omap_hwmod omap44xx_dss_dsi2_hwmod = {
-	.name		= "dss_dsi2",
-	.class		= &omap44xx_dsi_hwmod_class,
-	.clkdm_name	= "l3_dss_clkdm",
-	.main_clk	= "dss_dss_clk",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET,
-		},
-	},
-	.opt_clks	= dss_dsi2_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(dss_dsi2_opt_clks),
-	.parent_hwmod	= &omap44xx_dss_hwmod,
-};
-
-/*
- * 'hdmi' class
- * hdmi controller
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_hdmi_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.sysc_flags	= (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class omap44xx_hdmi_hwmod_class = {
-	.name	= "hdmi",
-	.sysc	= &omap44xx_hdmi_sysc,
-};
-
-/* dss_hdmi */
-static struct omap_hwmod_opt_clk dss_hdmi_opt_clks[] = {
-	{ .role = "sys_clk", .clk = "dss_sys_clk" },
-	{ .role = "hdmi_clk", .clk = "dss_48mhz_clk" },
-};
-
-static struct omap_hwmod omap44xx_dss_hdmi_hwmod = {
-	.name		= "dss_hdmi",
-	.class		= &omap44xx_hdmi_hwmod_class,
-	.clkdm_name	= "l3_dss_clkdm",
-	/*
-	 * HDMI audio requires to use no-idle mode. Hence,
-	 * set idle mode by software.
-	 */
-	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_OPT_CLKS_NEEDED,
-	.main_clk	= "dss_48mhz_clk",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET,
-		},
-	},
-	.opt_clks	= dss_hdmi_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(dss_hdmi_opt_clks),
-	.parent_hwmod	= &omap44xx_dss_hwmod,
-};
-
-/*
- * 'rfbi' class
- * remote frame buffer interface
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_rfbi_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap44xx_rfbi_hwmod_class = {
-	.name	= "rfbi",
-	.sysc	= &omap44xx_rfbi_sysc,
-};
-
-/* dss_rfbi */
-static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
-	{ .role = "ick", .clk = "l3_div_ck" },
-};
-
-static struct omap_hwmod omap44xx_dss_rfbi_hwmod = {
-	.name		= "dss_rfbi",
-	.class		= &omap44xx_rfbi_hwmod_class,
-	.clkdm_name	= "l3_dss_clkdm",
-	.main_clk	= "dss_dss_clk",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET,
-		},
-	},
-	.opt_clks	= dss_rfbi_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(dss_rfbi_opt_clks),
-	.parent_hwmod	= &omap44xx_dss_hwmod,
-};
-
-/*
- * 'venc' class
- * video encoder
- */
-
-static struct omap_hwmod_class omap44xx_venc_hwmod_class = {
-	.name	= "venc",
-};
-
-/* dss_venc */
-static struct omap_hwmod_opt_clk dss_venc_opt_clks[] = {
-	{ .role = "tv_clk", .clk = "dss_tv_clk" },
-};
-
-static struct omap_hwmod omap44xx_dss_venc_hwmod = {
-	.name		= "dss_venc",
-	.class		= &omap44xx_venc_hwmod_class,
-	.clkdm_name	= "l3_dss_clkdm",
-	.main_clk	= "dss_tv_clk",
-	.flags		= HWMOD_OPT_CLKS_NEEDED,
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET,
-		},
-	},
-	.parent_hwmod	= &omap44xx_dss_hwmod,
-	.opt_clks	= dss_venc_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(dss_venc_opt_clks),
-};
-
-
-
-/*
  * 'emif' class
  * external memory interface no1
  */
@@ -737,39 +437,6 @@ static struct omap_hwmod omap44xx_gpmc_hwmod = {
 	},
 };
 
-
-/*
- * 'ipu' class
- * imaging processor unit
- */
-
-static struct omap_hwmod_class omap44xx_ipu_hwmod_class = {
-	.name	= "ipu",
-};
-
-/* ipu */
-static struct omap_hwmod_rst_info omap44xx_ipu_resets[] = {
-	{ .name = "cpu0", .rst_shift = 0 },
-	{ .name = "cpu1", .rst_shift = 1 },
-};
-
-static struct omap_hwmod omap44xx_ipu_hwmod = {
-	.name		= "ipu",
-	.class		= &omap44xx_ipu_hwmod_class,
-	.clkdm_name	= "ducati_clkdm",
-	.rst_lines	= omap44xx_ipu_resets,
-	.rst_lines_cnt	= ARRAY_SIZE(omap44xx_ipu_resets),
-	.main_clk	= "ducati_clk_mux_ck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_DUCATI_DUCATI_CLKCTRL_OFFSET,
-			.rstctrl_offs = OMAP4_RM_DUCATI_RSTCTRL_OFFSET,
-			.context_offs = OMAP4_RM_DUCATI_DUCATI_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-};
-
 /*
  * 'iss' class
  * external images sensor pixel data processor
@@ -1236,22 +903,6 @@ static struct omap_hwmod_ocp_if omap44xx_ocp_wp_noc__l3_instr = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* dsp -> l3_main_1 */
-static struct omap_hwmod_ocp_if omap44xx_dsp__l3_main_1 = {
-	.master		= &omap44xx_dsp_hwmod,
-	.slave		= &omap44xx_l3_main_1_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dss -> l3_main_1 */
-static struct omap_hwmod_ocp_if omap44xx_dss__l3_main_1 = {
-	.master		= &omap44xx_dss_hwmod,
-	.slave		= &omap44xx_l3_main_1_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l3_main_2 -> l3_main_1 */
 static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l3_main_1 = {
 	.master		= &omap44xx_l3_main_2_hwmod,
@@ -1284,14 +935,6 @@ static struct omap_hwmod_ocp_if omap44xx_debugss__l3_main_2 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* ipu -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_ipu__l3_main_2 = {
-	.master		= &omap44xx_ipu_hwmod,
-	.slave		= &omap44xx_l3_main_2_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* iss -> l3_main_2 */
 static struct omap_hwmod_ocp_if omap44xx_iss__l3_main_2 = {
 	.master		= &omap44xx_iss_hwmod,
@@ -1364,14 +1007,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_3 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* dsp -> l4_abe */
-static struct omap_hwmod_ocp_if omap44xx_dsp__l4_abe = {
-	.master		= &omap44xx_dsp_hwmod,
-	.slave		= &omap44xx_l4_abe_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l3_main_1 -> l4_abe */
 static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l4_abe = {
 	.master		= &omap44xx_l3_main_1_hwmod,
@@ -1476,142 +1111,6 @@ static struct omap_hwmod_ocp_if omap44xx_l3_instr__debugss = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* dsp -> iva */
-static struct omap_hwmod_ocp_if omap44xx_dsp__iva = {
-	.master		= &omap44xx_dsp_hwmod,
-	.slave		= &omap44xx_iva_hwmod,
-	.clk		= "dpll_iva_m5x2_ck",
-	.user		= OCP_USER_DSP,
-};
-
-/* dsp -> sl2if */
-static struct omap_hwmod_ocp_if __maybe_unused omap44xx_dsp__sl2if = {
-	.master		= &omap44xx_dsp_hwmod,
-	.slave		= &omap44xx_sl2if_hwmod,
-	.clk		= "dpll_iva_m5x2_ck",
-	.user		= OCP_USER_DSP,
-};
-
-/* l4_cfg -> dsp */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__dsp = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_dsp_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_2 -> dss */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss = {
-	.master		= &omap44xx_l3_main_2_hwmod,
-	.slave		= &omap44xx_dss_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_SDMA,
-};
-
-/* l4_per -> dss */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__dss = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_dss_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU,
-};
-
-/* l3_main_2 -> dss_dispc */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dispc = {
-	.master		= &omap44xx_l3_main_2_hwmod,
-	.slave		= &omap44xx_dss_dispc_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_SDMA,
-};
-
-/* l4_per -> dss_dispc */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dispc = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_dss_dispc_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU,
-};
-
-/* l3_main_2 -> dss_dsi1 */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dsi1 = {
-	.master		= &omap44xx_l3_main_2_hwmod,
-	.slave		= &omap44xx_dss_dsi1_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_SDMA,
-};
-
-/* l4_per -> dss_dsi1 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dsi1 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_dss_dsi1_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU,
-};
-
-/* l3_main_2 -> dss_dsi2 */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dsi2 = {
-	.master		= &omap44xx_l3_main_2_hwmod,
-	.slave		= &omap44xx_dss_dsi2_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_SDMA,
-};
-
-/* l4_per -> dss_dsi2 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dsi2 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_dss_dsi2_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU,
-};
-
-/* l3_main_2 -> dss_hdmi */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_hdmi = {
-	.master		= &omap44xx_l3_main_2_hwmod,
-	.slave		= &omap44xx_dss_hdmi_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_SDMA,
-};
-
-/* l4_per -> dss_hdmi */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_hdmi = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_dss_hdmi_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU,
-};
-
-/* l3_main_2 -> dss_rfbi */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_rfbi = {
-	.master		= &omap44xx_l3_main_2_hwmod,
-	.slave		= &omap44xx_dss_rfbi_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_SDMA,
-};
-
-/* l4_per -> dss_rfbi */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_rfbi = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_dss_rfbi_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU,
-};
-
-/* l3_main_2 -> dss_venc */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_venc = {
-	.master		= &omap44xx_l3_main_2_hwmod,
-	.slave		= &omap44xx_dss_venc_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_SDMA,
-};
-
-/* l4_per -> dss_venc */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_venc = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_dss_venc_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU,
-};
-
 /* l3_main_2 -> gpmc */
 static struct omap_hwmod_ocp_if omap44xx_l3_main_2__gpmc = {
 	.master		= &omap44xx_l3_main_2_hwmod,
@@ -1620,14 +1119,6 @@ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__gpmc = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l3_main_2 -> ipu */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__ipu = {
-	.master		= &omap44xx_l3_main_2_hwmod,
-	.slave		= &omap44xx_ipu_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l3_main_2 -> iss */
 static struct omap_hwmod_ocp_if omap44xx_l3_main_2__iss = {
 	.master		= &omap44xx_l3_main_2_hwmod,
@@ -1762,13 +1253,10 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
 	&omap44xx_iva__l3_instr,
 	&omap44xx_l3_main_3__l3_instr,
 	&omap44xx_ocp_wp_noc__l3_instr,
-	&omap44xx_dsp__l3_main_1,
-	&omap44xx_dss__l3_main_1,
 	&omap44xx_l3_main_2__l3_main_1,
 	&omap44xx_l4_cfg__l3_main_1,
 	&omap44xx_mpu__l3_main_1,
 	&omap44xx_debugss__l3_main_2,
-	&omap44xx_ipu__l3_main_2,
 	&omap44xx_iss__l3_main_2,
 	&omap44xx_iva__l3_main_2,
 	&omap44xx_l3_main_1__l3_main_2,
@@ -1778,7 +1266,6 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
 	&omap44xx_l3_main_1__l3_main_3,
 	&omap44xx_l3_main_2__l3_main_3,
 	&omap44xx_l4_cfg__l3_main_3,
-	&omap44xx_dsp__l4_abe,
 	&omap44xx_l3_main_1__l4_abe,
 	&omap44xx_mpu__l4_abe,
 	&omap44xx_l3_main_1__l4_cfg,
@@ -1792,25 +1279,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
 	&omap44xx_l4_wkup__ctrl_module_wkup,
 	&omap44xx_l4_wkup__ctrl_module_pad_wkup,
 	&omap44xx_l3_instr__debugss,
-	&omap44xx_dsp__iva,
-	/* &omap44xx_dsp__sl2if, */
-	&omap44xx_l4_cfg__dsp,
-	&omap44xx_l3_main_2__dss,
-	&omap44xx_l4_per__dss,
-	&omap44xx_l3_main_2__dss_dispc,
-	&omap44xx_l4_per__dss_dispc,
-	&omap44xx_l3_main_2__dss_dsi1,
-	&omap44xx_l4_per__dss_dsi1,
-	&omap44xx_l3_main_2__dss_dsi2,
-	&omap44xx_l4_per__dss_dsi2,
-	&omap44xx_l3_main_2__dss_hdmi,
-	&omap44xx_l4_per__dss_hdmi,
-	&omap44xx_l3_main_2__dss_rfbi,
-	&omap44xx_l4_per__dss_rfbi,
-	&omap44xx_l3_main_2__dss_venc,
-	&omap44xx_l4_per__dss_venc,
 	&omap44xx_l3_main_2__gpmc,
-	&omap44xx_l3_main_2__ipu,
 	&omap44xx_l3_main_2__iss,
 	/* &omap44xx_iva__sl2if, */
 	&omap44xx_l3_main_2__iva,
diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
index ad398f6..08f34f4 100644
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
@@ -227,240 +227,6 @@ static struct omap_hwmod omap54xx_counter_32k_hwmod = {
 };
 
 /*
- * 'dss' class
- * display sub-system
- */
-static struct omap_hwmod_class_sysconfig omap54xx_dss_sysc = {
-	.rev_offs	= 0x0000,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= SYSS_HAS_RESET_STATUS,
-};
-
-static struct omap_hwmod_class omap54xx_dss_hwmod_class = {
-	.name	= "dss",
-	.sysc	= &omap54xx_dss_sysc,
-	.reset	= omap_dss_reset,
-};
-
-/* dss */
-static struct omap_hwmod_opt_clk dss_opt_clks[] = {
-	{ .role = "32khz_clk", .clk = "dss_32khz_clk" },
-	{ .role = "sys_clk", .clk = "dss_sys_clk" },
-	{ .role = "hdmi_clk", .clk = "dss_48mhz_clk" },
-};
-
-static struct omap_hwmod omap54xx_dss_hwmod = {
-	.name		= "dss_core",
-	.class		= &omap54xx_dss_hwmod_class,
-	.clkdm_name	= "dss_clkdm",
-	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.main_clk	= "dss_dss_clk",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_DSS_DSS_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.opt_clks	= dss_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(dss_opt_clks),
-};
-
-/*
- * 'dispc' class
- * display controller
- */
-
-static struct omap_hwmod_class_sysconfig omap54xx_dispc_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
-			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_MIDLEMODE |
-			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
-			   SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap54xx_dispc_hwmod_class = {
-	.name	= "dispc",
-	.sysc	= &omap54xx_dispc_sysc,
-};
-
-/* dss_dispc */
-static struct omap_hwmod_opt_clk dss_dispc_opt_clks[] = {
-	{ .role = "sys_clk", .clk = "dss_sys_clk" },
-};
-
-/* dss_dispc dev_attr */
-static struct omap_dss_dispc_dev_attr dss_dispc_dev_attr = {
-	.has_framedonetv_irq	= 1,
-	.manager_count		= 4,
-};
-
-static struct omap_hwmod omap54xx_dss_dispc_hwmod = {
-	.name		= "dss_dispc",
-	.class		= &omap54xx_dispc_hwmod_class,
-	.clkdm_name	= "dss_clkdm",
-	.main_clk	= "dss_dss_clk",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET,
-			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
-		},
-	},
-	.opt_clks	= dss_dispc_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(dss_dispc_opt_clks),
-	.dev_attr	= &dss_dispc_dev_attr,
-	.parent_hwmod	= &omap54xx_dss_hwmod,
-};
-
-/*
- * 'dsi1' class
- * display serial interface controller
- */
-
-static struct omap_hwmod_class_sysconfig omap54xx_dsi1_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
-			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap54xx_dsi1_hwmod_class = {
-	.name	= "dsi1",
-	.sysc	= &omap54xx_dsi1_sysc,
-};
-
-/* dss_dsi1_a */
-static struct omap_hwmod_opt_clk dss_dsi1_a_opt_clks[] = {
-	{ .role = "sys_clk", .clk = "dss_sys_clk" },
-};
-
-static struct omap_hwmod omap54xx_dss_dsi1_a_hwmod = {
-	.name		= "dss_dsi1",
-	.class		= &omap54xx_dsi1_hwmod_class,
-	.clkdm_name	= "dss_clkdm",
-	.main_clk	= "dss_dss_clk",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET,
-			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
-		},
-	},
-	.opt_clks	= dss_dsi1_a_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(dss_dsi1_a_opt_clks),
-	.parent_hwmod	= &omap54xx_dss_hwmod,
-};
-
-/* dss_dsi1_c */
-static struct omap_hwmod_opt_clk dss_dsi1_c_opt_clks[] = {
-	{ .role = "sys_clk", .clk = "dss_sys_clk" },
-};
-
-static struct omap_hwmod omap54xx_dss_dsi1_c_hwmod = {
-	.name		= "dss_dsi2",
-	.class		= &omap54xx_dsi1_hwmod_class,
-	.clkdm_name	= "dss_clkdm",
-	.main_clk	= "dss_dss_clk",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET,
-			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
-		},
-	},
-	.opt_clks	= dss_dsi1_c_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(dss_dsi1_c_opt_clks),
-	.parent_hwmod	= &omap54xx_dss_hwmod,
-};
-
-/*
- * 'hdmi' class
- * hdmi controller
- */
-
-static struct omap_hwmod_class_sysconfig omap54xx_hdmi_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.sysc_flags	= (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class omap54xx_hdmi_hwmod_class = {
-	.name	= "hdmi",
-	.sysc	= &omap54xx_hdmi_sysc,
-};
-
-static struct omap_hwmod_opt_clk dss_hdmi_opt_clks[] = {
-	{ .role = "sys_clk", .clk = "dss_sys_clk" },
-};
-
-static struct omap_hwmod omap54xx_dss_hdmi_hwmod = {
-	.name		= "dss_hdmi",
-	.class		= &omap54xx_hdmi_hwmod_class,
-	.clkdm_name	= "dss_clkdm",
-	.main_clk	= "dss_48mhz_clk",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET,
-			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
-		},
-	},
-	.opt_clks	= dss_hdmi_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(dss_hdmi_opt_clks),
-	.parent_hwmod	= &omap54xx_dss_hwmod,
-};
-
-/*
- * 'rfbi' class
- * remote frame buffer interface
- */
-
-static struct omap_hwmod_class_sysconfig omap54xx_rfbi_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap54xx_rfbi_hwmod_class = {
-	.name	= "rfbi",
-	.sysc	= &omap54xx_rfbi_sysc,
-};
-
-/* dss_rfbi */
-static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
-	{ .role = "ick", .clk = "l3_iclk_div" },
-};
-
-static struct omap_hwmod omap54xx_dss_rfbi_hwmod = {
-	.name		= "dss_rfbi",
-	.class		= &omap54xx_rfbi_hwmod_class,
-	.clkdm_name	= "dss_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET,
-			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
-		},
-	},
-	.opt_clks	= dss_rfbi_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(dss_rfbi_opt_clks),
-	.parent_hwmod	= &omap54xx_dss_hwmod,
-};
-
-/*
  * 'emif' class
  * external memory interface no1 (wrapper)
  */
@@ -908,54 +674,6 @@ static struct omap_hwmod_ocp_if omap54xx_l4_wkup__counter_32k = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l3_main_2 -> dss */
-static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss = {
-	.master		= &omap54xx_l3_main_2_hwmod,
-	.slave		= &omap54xx_dss_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_2 -> dss_dispc */
-static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_dispc = {
-	.master		= &omap54xx_l3_main_2_hwmod,
-	.slave		= &omap54xx_dss_dispc_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_2 -> dss_dsi1_a */
-static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_dsi1_a = {
-	.master		= &omap54xx_l3_main_2_hwmod,
-	.slave		= &omap54xx_dss_dsi1_a_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_2 -> dss_dsi1_c */
-static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_dsi1_c = {
-	.master		= &omap54xx_l3_main_2_hwmod,
-	.slave		= &omap54xx_dss_dsi1_c_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_2 -> dss_hdmi */
-static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_hdmi = {
-	.master		= &omap54xx_l3_main_2_hwmod,
-	.slave		= &omap54xx_dss_hdmi_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_2 -> dss_rfbi */
-static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_rfbi = {
-	.master		= &omap54xx_l3_main_2_hwmod,
-	.slave		= &omap54xx_dss_rfbi_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* mpu -> emif1 */
 static struct omap_hwmod_ocp_if omap54xx_mpu__emif1 = {
 	.master		= &omap54xx_mpu_hwmod,
@@ -1030,12 +748,6 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = {
 	&omap54xx_l3_main_1__l4_wkup,
 	&omap54xx_mpu__mpu_private,
 	&omap54xx_l4_wkup__counter_32k,
-	&omap54xx_l3_main_2__dss,
-	&omap54xx_l3_main_2__dss_dispc,
-	&omap54xx_l3_main_2__dss_dsi1_a,
-	&omap54xx_l3_main_2__dss_dsi1_c,
-	&omap54xx_l3_main_2__dss_hdmi,
-	&omap54xx_l3_main_2__dss_rfbi,
 	&omap54xx_mpu__emif1,
 	&omap54xx_mpu__emif2,
 	&omap54xx_l4_cfg__mpu,
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index acef373..e95668b 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -277,203 +277,6 @@ static struct omap_hwmod dra7xx_ctrl_module_wkup_hwmod = {
 };
 
 /*
- * 'tpcc' class
- *
- */
-static struct omap_hwmod_class dra7xx_tpcc_hwmod_class = {
-	.name		= "tpcc",
-};
-
-static struct omap_hwmod dra7xx_tpcc_hwmod = {
-	.name		= "tpcc",
-	.class		= &dra7xx_tpcc_hwmod_class,
-	.clkdm_name	= "l3main1_clkdm",
-	.main_clk	= "l3_iclk_div",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs = DRA7XX_CM_L3MAIN1_TPCC_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L3MAIN1_TPCC_CONTEXT_OFFSET,
-		},
-	},
-};
-
-/*
- * 'tptc' class
- *
- */
-static struct omap_hwmod_class dra7xx_tptc_hwmod_class = {
-	.name		= "tptc",
-};
-
-/* tptc0 */
-static struct omap_hwmod dra7xx_tptc0_hwmod = {
-	.name		= "tptc0",
-	.class		= &dra7xx_tptc_hwmod_class,
-	.clkdm_name	= "l3main1_clkdm",
-	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
-	.main_clk	= "l3_iclk_div",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs = DRA7XX_CM_L3MAIN1_TPTC1_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L3MAIN1_TPTC1_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-};
-
-/* tptc1 */
-static struct omap_hwmod dra7xx_tptc1_hwmod = {
-	.name		= "tptc1",
-	.class		= &dra7xx_tptc_hwmod_class,
-	.clkdm_name	= "l3main1_clkdm",
-	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
-	.main_clk	= "l3_iclk_div",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs = DRA7XX_CM_L3MAIN1_TPTC2_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L3MAIN1_TPTC2_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-};
-
-/*
- * 'dss' class
- *
- */
-
-static struct omap_hwmod_class_sysconfig dra7xx_dss_sysc = {
-	.rev_offs	= 0x0000,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= SYSS_HAS_RESET_STATUS,
-};
-
-static struct omap_hwmod_class dra7xx_dss_hwmod_class = {
-	.name	= "dss",
-	.sysc	= &dra7xx_dss_sysc,
-	.reset	= omap_dss_reset,
-};
-
-/* dss */
-static struct omap_hwmod_opt_clk dss_opt_clks[] = {
-	{ .role = "dss_clk", .clk = "dss_dss_clk" },
-	{ .role = "hdmi_phy_clk", .clk = "dss_48mhz_clk" },
-	{ .role = "32khz_clk", .clk = "dss_32khz_clk" },
-	{ .role = "video2_clk", .clk = "dss_video2_clk" },
-	{ .role = "video1_clk", .clk = "dss_video1_clk" },
-	{ .role = "hdmi_clk", .clk = "dss_hdmi_clk" },
-	{ .role = "hdcp_clk", .clk = "dss_deshdcp_clk" },
-};
-
-static struct omap_hwmod dra7xx_dss_hwmod = {
-	.name		= "dss_core",
-	.class		= &dra7xx_dss_hwmod_class,
-	.clkdm_name	= "dss_clkdm",
-	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.main_clk	= "dss_dss_clk",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_DSS_DSS_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_DSS_DSS_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.opt_clks	= dss_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(dss_opt_clks),
-};
-
-/*
- * 'dispc' class
- * display controller
- */
-
-static struct omap_hwmod_class_sysconfig dra7xx_dispc_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
-			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_MIDLEMODE |
-			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
-			   SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class dra7xx_dispc_hwmod_class = {
-	.name	= "dispc",
-	.sysc	= &dra7xx_dispc_sysc,
-};
-
-/* dss_dispc */
-/* dss_dispc dev_attr */
-static struct omap_dss_dispc_dev_attr dss_dispc_dev_attr = {
-	.has_framedonetv_irq	= 1,
-	.manager_count		= 4,
-};
-
-static struct omap_hwmod dra7xx_dss_dispc_hwmod = {
-	.name		= "dss_dispc",
-	.class		= &dra7xx_dispc_hwmod_class,
-	.clkdm_name	= "dss_clkdm",
-	.main_clk	= "dss_dss_clk",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_DSS_DSS_CLKCTRL_OFFSET,
-			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
-		},
-	},
-	.dev_attr	= &dss_dispc_dev_attr,
-	.parent_hwmod	= &dra7xx_dss_hwmod,
-};
-
-/*
- * 'hdmi' class
- * hdmi controller
- */
-
-static struct omap_hwmod_class_sysconfig dra7xx_hdmi_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.sysc_flags	= (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class dra7xx_hdmi_hwmod_class = {
-	.name	= "hdmi",
-	.sysc	= &dra7xx_hdmi_sysc,
-};
-
-/* dss_hdmi */
-
-static struct omap_hwmod_opt_clk dss_hdmi_opt_clks[] = {
-	{ .role = "sys_clk", .clk = "dss_hdmi_clk" },
-};
-
-static struct omap_hwmod dra7xx_dss_hdmi_hwmod = {
-	.name		= "dss_hdmi",
-	.class		= &dra7xx_hdmi_hwmod_class,
-	.clkdm_name	= "dss_clkdm",
-	.main_clk	= "dss_48mhz_clk",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_DSS_DSS_CLKCTRL_OFFSET,
-			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
-		},
-	},
-	.opt_clks	= dss_hdmi_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(dss_hdmi_opt_clks),
-	.parent_hwmod	= &dra7xx_dss_hwmod,
-};
-
-
-
-
-
-/*
  * 'gpmc' class
  *
  */
@@ -1077,54 +880,6 @@ static struct omap_hwmod_ocp_if dra7xx_l4_wkup__ctrl_module_wkup = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l3_main_1 -> tpcc */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__tpcc = {
-	.master		= &dra7xx_l3_main_1_hwmod,
-	.slave		= &dra7xx_tpcc_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU,
-};
-
-/* l3_main_1 -> tptc0 */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__tptc0 = {
-	.master		= &dra7xx_l3_main_1_hwmod,
-	.slave		= &dra7xx_tptc0_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU,
-};
-
-/* l3_main_1 -> tptc1 */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__tptc1 = {
-	.master		= &dra7xx_l3_main_1_hwmod,
-	.slave		= &dra7xx_tptc1_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU,
-};
-
-/* l3_main_1 -> dss */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__dss = {
-	.master		= &dra7xx_l3_main_1_hwmod,
-	.slave		= &dra7xx_dss_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> dispc */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__dispc = {
-	.master		= &dra7xx_l3_main_1_hwmod,
-	.slave		= &dra7xx_dss_dispc_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> dispc */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__hdmi = {
-	.master		= &dra7xx_l3_main_1_hwmod,
-	.slave		= &dra7xx_dss_hdmi_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l3_main_1 -> gpmc */
 static struct omap_hwmod_ocp_if dra7xx_l3_main_1__gpmc = {
 	.master		= &dra7xx_l3_main_1_hwmod,
@@ -1309,12 +1064,6 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
 	&dra7xx_l3_main_1__bb2d,
 	&dra7xx_l4_wkup__counter_32k,
 	&dra7xx_l4_wkup__ctrl_module_wkup,
-	&dra7xx_l3_main_1__tpcc,
-	&dra7xx_l3_main_1__tptc0,
-	&dra7xx_l3_main_1__tptc1,
-	&dra7xx_l3_main_1__dss,
-	&dra7xx_l3_main_1__dispc,
-	&dra7xx_l3_main_1__hdmi,
 	&dra7xx_l3_main_1__gpmc,
 	&dra7xx_l4_cfg__mpu,
 	&dra7xx_l3_main_1__pciess1,
diff --git a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
index 83230d9..6a9f1ad 100644
--- a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
@@ -129,13 +129,6 @@ static struct omap_hwmod dm81xx_alwon_l3_med_hwmod = {
 	.flags		= HWMOD_NO_IDLEST,
 };
 
-static struct omap_hwmod dm81xx_alwon_l3_fast_hwmod = {
-	.name		= "l3_fast",
-	.clkdm_name	= "alwon_l3_fast_clkdm",
-	.class		= &l3_hwmod_class,
-	.flags		= HWMOD_NO_IDLEST,
-};
-
 /*
  * L4 standard peripherals, see TRM table 1-12 for devices using this.
  * See TRM table 1-73 for devices using the 125MHz SYSCLK6 clock.
@@ -867,62 +860,6 @@ static struct omap_hwmod_ocp_if dm816x_l4_ls__timer7 = {
 	.user		= OCP_USER_MPU,
 };
 
-/* CPSW on dm814x */
-static struct omap_hwmod_class_sysconfig dm814x_cpgmac_sysc = {
-	.rev_offs	= 0x0,
-	.sysc_offs	= 0x8,
-	.syss_offs	= 0x4,
-	.sysc_flags	= SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
-			  SYSS_HAS_RESET_STATUS,
-	.idlemodes	= SIDLE_FORCE | SIDLE_NO | MSTANDBY_FORCE |
-			  MSTANDBY_NO,
-	.sysc_fields	= &omap_hwmod_sysc_type3,
-};
-
-static struct omap_hwmod_class dm814x_cpgmac0_hwmod_class = {
-	.name		= "cpgmac0",
-	.sysc		= &dm814x_cpgmac_sysc,
-};
-
-static struct omap_hwmod dm814x_cpgmac0_hwmod = {
-	.name		= "cpgmac0",
-	.class		= &dm814x_cpgmac0_hwmod_class,
-	.clkdm_name	= "alwon_ethernet_clkdm",
-	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
-	.main_clk	= "cpsw_125mhz_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs = DM81XX_CM_ALWON_ETHERNET_0_CLKCTRL,
-			.modulemode = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod_class dm814x_mdio_hwmod_class = {
-	.name		= "davinci_mdio",
-};
-
-static struct omap_hwmod dm814x_mdio_hwmod = {
-	.name		= "davinci_mdio",
-	.class		= &dm814x_mdio_hwmod_class,
-	.clkdm_name	= "alwon_ethernet_clkdm",
-	.main_clk	= "cpsw_125mhz_gclk",
-};
-
-static struct omap_hwmod_ocp_if dm814x_l4_hs__cpgmac0 = {
-	.master		= &dm81xx_l4_hs_hwmod,
-	.slave		= &dm814x_cpgmac0_hwmod,
-	.clk		= "cpsw_125mhz_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if dm814x_cpgmac0__mdio = {
-	.master		= &dm814x_cpgmac0_hwmod,
-	.slave		= &dm814x_mdio_hwmod,
-	.user		= OCP_USER_MPU,
-	.flags		= HWMOD_NO_IDLEST,
-};
-
 /* EMAC Ethernet */
 static struct omap_hwmod_class_sysconfig dm816x_emac_sysc = {
 	.rev_offs	= 0x0,
@@ -1321,154 +1258,6 @@ static struct omap_hwmod_ocp_if dm81xx_l4_ls__spinbox = {
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod_class dm81xx_tpcc_hwmod_class = {
-	.name		= "tpcc",
-};
-
-static struct omap_hwmod dm81xx_tpcc_hwmod = {
-	.name		= "tpcc",
-	.class		= &dm81xx_tpcc_hwmod_class,
-	.clkdm_name	= "alwon_l3s_clkdm",
-	.main_clk	= "sysclk4_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= DM81XX_CM_ALWON_TPCC_CLKCTRL,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod_ocp_if dm81xx_alwon_l3_fast__tpcc = {
-	.master		= &dm81xx_alwon_l3_fast_hwmod,
-	.slave		= &dm81xx_tpcc_hwmod,
-	.clk		= "sysclk4_ck",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_class dm81xx_tptc0_hwmod_class = {
-	.name		= "tptc0",
-};
-
-static struct omap_hwmod dm81xx_tptc0_hwmod = {
-	.name		= "tptc0",
-	.class		= &dm81xx_tptc0_hwmod_class,
-	.clkdm_name	= "alwon_l3s_clkdm",
-	.main_clk	= "sysclk4_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= DM81XX_CM_ALWON_TPTC0_CLKCTRL,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod_ocp_if dm81xx_alwon_l3_fast__tptc0 = {
-	.master		= &dm81xx_alwon_l3_fast_hwmod,
-	.slave		= &dm81xx_tptc0_hwmod,
-	.clk		= "sysclk4_ck",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if dm81xx_tptc0__alwon_l3_fast = {
-	.master		= &dm81xx_tptc0_hwmod,
-	.slave		= &dm81xx_alwon_l3_fast_hwmod,
-	.clk		= "sysclk4_ck",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_class dm81xx_tptc1_hwmod_class = {
-	.name		= "tptc1",
-};
-
-static struct omap_hwmod dm81xx_tptc1_hwmod = {
-	.name		= "tptc1",
-	.class		= &dm81xx_tptc1_hwmod_class,
-	.clkdm_name	= "alwon_l3s_clkdm",
-	.main_clk	= "sysclk4_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= DM81XX_CM_ALWON_TPTC1_CLKCTRL,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod_ocp_if dm81xx_alwon_l3_fast__tptc1 = {
-	.master		= &dm81xx_alwon_l3_fast_hwmod,
-	.slave		= &dm81xx_tptc1_hwmod,
-	.clk		= "sysclk4_ck",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if dm81xx_tptc1__alwon_l3_fast = {
-	.master		= &dm81xx_tptc1_hwmod,
-	.slave		= &dm81xx_alwon_l3_fast_hwmod,
-	.clk		= "sysclk4_ck",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_class dm81xx_tptc2_hwmod_class = {
-	.name		= "tptc2",
-};
-
-static struct omap_hwmod dm81xx_tptc2_hwmod = {
-	.name		= "tptc2",
-	.class		= &dm81xx_tptc2_hwmod_class,
-	.clkdm_name	= "alwon_l3s_clkdm",
-	.main_clk	= "sysclk4_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= DM81XX_CM_ALWON_TPTC2_CLKCTRL,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod_ocp_if dm81xx_alwon_l3_fast__tptc2 = {
-	.master		= &dm81xx_alwon_l3_fast_hwmod,
-	.slave		= &dm81xx_tptc2_hwmod,
-	.clk		= "sysclk4_ck",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if dm81xx_tptc2__alwon_l3_fast = {
-	.master		= &dm81xx_tptc2_hwmod,
-	.slave		= &dm81xx_alwon_l3_fast_hwmod,
-	.clk		= "sysclk4_ck",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_class dm81xx_tptc3_hwmod_class = {
-	.name		= "tptc3",
-};
-
-static struct omap_hwmod dm81xx_tptc3_hwmod = {
-	.name		= "tptc3",
-	.class		= &dm81xx_tptc3_hwmod_class,
-	.clkdm_name	= "alwon_l3s_clkdm",
-	.main_clk	= "sysclk4_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= DM81XX_CM_ALWON_TPTC3_CLKCTRL,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod_ocp_if dm81xx_alwon_l3_fast__tptc3 = {
-	.master		= &dm81xx_alwon_l3_fast_hwmod,
-	.slave		= &dm81xx_tptc3_hwmod,
-	.clk		= "sysclk4_ck",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if dm81xx_tptc3__alwon_l3_fast = {
-	.master		= &dm81xx_tptc3_hwmod,
-	.slave		= &dm81xx_alwon_l3_fast_hwmod,
-	.clk		= "sysclk4_ck",
-	.user		= OCP_USER_MPU,
-};
-
 /*
  * REVISIT: Test and enable the following once clocks work:
  * dm81xx_l4_ls__mailbox
@@ -1499,19 +1288,8 @@ static struct omap_hwmod_ocp_if *dm814x_hwmod_ocp_ifs[] __initdata = {
 	&dm814x_l4_ls__mmc1,
 	&dm814x_l4_ls__mmc2,
 	&ti81xx_l4_ls__rtc,
-	&dm81xx_alwon_l3_fast__tpcc,
-	&dm81xx_alwon_l3_fast__tptc0,
-	&dm81xx_alwon_l3_fast__tptc1,
-	&dm81xx_alwon_l3_fast__tptc2,
-	&dm81xx_alwon_l3_fast__tptc3,
-	&dm81xx_tptc0__alwon_l3_fast,
-	&dm81xx_tptc1__alwon_l3_fast,
-	&dm81xx_tptc2__alwon_l3_fast,
-	&dm81xx_tptc3__alwon_l3_fast,
 	&dm814x_l4_ls__timer1,
 	&dm814x_l4_ls__timer2,
-	&dm814x_l4_hs__cpgmac0,
-	&dm814x_cpgmac0__mdio,
 	&dm81xx_alwon_l3_slow__gpmc,
 	&dm814x_default_l3_slow__usbss,
 	&dm814x_alwon_l3_med__mmc3,
@@ -1554,15 +1332,6 @@ static struct omap_hwmod_ocp_if *dm816x_hwmod_ocp_ifs[] __initdata = {
 	&dm81xx_emac0__mdio,
 	&dm816x_l4_hs__emac1,
 	&dm81xx_l4_hs__sata,
-	&dm81xx_alwon_l3_fast__tpcc,
-	&dm81xx_alwon_l3_fast__tptc0,
-	&dm81xx_alwon_l3_fast__tptc1,
-	&dm81xx_alwon_l3_fast__tptc2,
-	&dm81xx_alwon_l3_fast__tptc3,
-	&dm81xx_tptc0__alwon_l3_fast,
-	&dm81xx_tptc1__alwon_l3_fast,
-	&dm81xx_tptc2__alwon_l3_fast,
-	&dm81xx_tptc3__alwon_l3_fast,
 	&dm81xx_alwon_l3_slow__gpmc,
 	&dm816x_default_l3_slow__usbss,
 	NULL,
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index dbb7c2a..2a4fe3e 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -397,10 +397,16 @@ static int ti_sysc_shutdown_module(struct device *dev,
 	return omap_hwmod_shutdown(cookie->data);
 }
 
+static bool ti_sysc_soc_type_gp(void)
+{
+	return omap_type() == OMAP2_DEVICE_TYPE_GP;
+}
+
 static struct of_dev_auxdata omap_auxdata_lookup[];
 
 static struct ti_sysc_platform_data ti_sysc_pdata = {
 	.auxdata = omap_auxdata_lookup,
+	.soc_type_gp = ti_sysc_soc_type_gp,
 	.init_clockdomain = ti_sysc_clkdm_init,
 	.clkdm_deny_idle = ti_sysc_clkdm_deny_idle,
 	.clkdm_allow_idle = ti_sysc_clkdm_allow_idle,
diff --git a/arch/arm/mach-omap2/pm33xx-core.c b/arch/arm/mach-omap2/pm33xx-core.c
index 7461b03..5455fc9 100644
--- a/arch/arm/mach-omap2/pm33xx-core.c
+++ b/arch/arm/mach-omap2/pm33xx-core.c
@@ -6,11 +6,14 @@
  *	Dave Gerlach
  */
 
+#include <linux/cpuidle.h>
+#include <linux/platform_data/pm33xx.h>
+#include <asm/cpuidle.h>
 #include <asm/smp_scu.h>
 #include <asm/suspend.h>
 #include <linux/errno.h>
-#include <linux/platform_data/pm33xx.h>
 #include <linux/clk.h>
+#include <linux/cpu.h>
 #include <linux/platform_data/gpio-omap.h>
 #include <linux/pinctrl/pinmux.h>
 #include <linux/wkup_m3_ipc.h>
@@ -35,6 +38,14 @@ static struct clockdomain *gfx_l4ls_clkdm;
 static void __iomem *scu_base;
 static struct omap_hwmod *rtc_oh;
 
+static int (*idle_fn)(u32 wfi_flags);
+
+struct amx3_idle_state {
+	int wfi_flags;
+};
+
+static struct amx3_idle_state *idle_states;
+
 static int am43xx_map_scu(void)
 {
 	scu_base = ioremap(scu_a9_get_base(), SZ_256);
@@ -68,7 +79,7 @@ static int am43xx_check_off_mode_enable(void)
 	return 0;
 }
 
-static int amx3_common_init(void)
+static int amx3_common_init(int (*idle)(u32 wfi_flags))
 {
 	gfx_pwrdm = pwrdm_lookup("gfx_pwrdm");
 	per_pwrdm = pwrdm_lookup("per_pwrdm");
@@ -88,10 +99,12 @@ static int amx3_common_init(void)
 	else
 		omap_set_pwrdm_state(cefuse_pwrdm, PWRDM_POWER_OFF);
 
+	idle_fn = idle;
+
 	return 0;
 }
 
-static int am33xx_suspend_init(void)
+static int am33xx_suspend_init(int (*idle)(u32 wfi_flags))
 {
 	int ret;
 
@@ -102,12 +115,12 @@ static int am33xx_suspend_init(void)
 		return -ENODEV;
 	}
 
-	ret = amx3_common_init();
+	ret = amx3_common_init(idle);
 
 	return ret;
 }
 
-static int am43xx_suspend_init(void)
+static int am43xx_suspend_init(int (*idle)(u32 wfi_flags))
 {
 	int ret = 0;
 
@@ -117,11 +130,17 @@ static int am43xx_suspend_init(void)
 		return ret;
 	}
 
-	ret = amx3_common_init();
+	ret = amx3_common_init(idle);
 
 	return ret;
 }
 
+static int amx3_suspend_deinit(void)
+{
+	idle_fn = NULL;
+	return 0;
+}
+
 static void amx3_pre_suspend_common(void)
 {
 	omap_set_pwrdm_state(gfx_pwrdm, PWRDM_POWER_OFF);
@@ -201,6 +220,43 @@ static int am43xx_suspend(unsigned int state, int (*fn)(unsigned long),
 	return ret;
 }
 
+static int am33xx_cpu_suspend(int (*fn)(unsigned long), unsigned long args)
+{
+	int ret = 0;
+
+	if (omap_irq_pending() || need_resched())
+		return ret;
+
+	ret = cpu_suspend(args, fn);
+
+	return ret;
+}
+
+static int am43xx_cpu_suspend(int (*fn)(unsigned long), unsigned long args)
+{
+	int ret = 0;
+
+	if (!scu_base)
+		return 0;
+
+	scu_power_mode(scu_base, SCU_PM_DORMANT);
+	ret = cpu_suspend(args, fn);
+	scu_power_mode(scu_base, SCU_PM_NORMAL);
+
+	return ret;
+}
+
+static void amx3_begin_suspend(void)
+{
+	cpu_idle_poll_ctrl(true);
+}
+
+static void amx3_finish_suspend(void)
+{
+	cpu_idle_poll_ctrl(false);
+}
+
+
 static struct am33xx_pm_sram_addr *amx3_get_sram_addrs(void)
 {
 	if (soc_is_am33xx())
@@ -253,7 +309,11 @@ static void am43xx_prepare_rtc_resume(void)
 
 static struct am33xx_pm_platform_data am33xx_ops = {
 	.init = am33xx_suspend_init,
+	.deinit = amx3_suspend_deinit,
 	.soc_suspend = am33xx_suspend,
+	.cpu_suspend = am33xx_cpu_suspend,
+	.begin_suspend = amx3_begin_suspend,
+	.finish_suspend = amx3_finish_suspend,
 	.get_sram_addrs = amx3_get_sram_addrs,
 	.save_context = am33xx_save_context,
 	.restore_context = am33xx_restore_context,
@@ -265,7 +325,11 @@ static struct am33xx_pm_platform_data am33xx_ops = {
 
 static struct am33xx_pm_platform_data am43xx_ops = {
 	.init = am43xx_suspend_init,
+	.deinit = amx3_suspend_deinit,
 	.soc_suspend = am43xx_suspend,
+	.cpu_suspend = am43xx_cpu_suspend,
+	.begin_suspend = amx3_begin_suspend,
+	.finish_suspend = amx3_finish_suspend,
 	.get_sram_addrs = amx3_get_sram_addrs,
 	.save_context = am43xx_save_context,
 	.restore_context = am43xx_restore_context,
@@ -301,3 +365,64 @@ int __init amx3_common_pm_init(void)
 
 	return 0;
 }
+
+static int __init amx3_idle_init(struct device_node *cpu_node, int cpu)
+{
+	struct device_node *state_node;
+	struct amx3_idle_state states[CPUIDLE_STATE_MAX];
+	int i;
+	int state_count = 1;
+
+	for (i = 0; ; i++) {
+		state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i);
+		if (!state_node)
+			break;
+
+		if (!of_device_is_available(state_node))
+			continue;
+
+		if (i == CPUIDLE_STATE_MAX) {
+			pr_warn("%s: cpuidle states reached max possible\n",
+				__func__);
+			break;
+		}
+
+		states[state_count].wfi_flags = 0;
+
+		if (of_property_read_bool(state_node, "ti,idle-wkup-m3"))
+			states[state_count].wfi_flags |= WFI_FLAG_WAKE_M3 |
+							 WFI_FLAG_FLUSH_CACHE;
+
+		state_count++;
+	}
+
+	idle_states = kcalloc(state_count, sizeof(*idle_states), GFP_KERNEL);
+	if (!idle_states)
+		return -ENOMEM;
+
+	for (i = 1; i < state_count; i++)
+		idle_states[i].wfi_flags = states[i].wfi_flags;
+
+	return 0;
+}
+
+static int amx3_idle_enter(unsigned long index)
+{
+	struct amx3_idle_state *idle_state = &idle_states[index];
+
+	if (!idle_state)
+		return -EINVAL;
+
+	if (idle_fn)
+		idle_fn(idle_state->wfi_flags);
+
+	return 0;
+}
+
+static struct cpuidle_ops amx3_cpuidle_ops __initdata = {
+	.init = amx3_idle_init,
+	.suspend = amx3_idle_enter,
+};
+
+CPUIDLE_METHOD_OF_DECLARE(pm33xx_idle, "ti,am3352", &amx3_cpuidle_ops);
+CPUIDLE_METHOD_OF_DECLARE(pm43xx_idle, "ti,am4372", &amx3_cpuidle_ops);
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index e66e994..6df395f 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -191,6 +191,7 @@ void omap_sram_idle(void)
 	int per_next_state = PWRDM_POWER_ON;
 	int core_next_state = PWRDM_POWER_ON;
 	u32 sdrc_pwr = 0;
+	int error;
 
 	mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
 	switch (mpu_next_state) {
@@ -219,8 +220,11 @@ void omap_sram_idle(void)
 	pwrdm_pre_transition(NULL);
 
 	/* PER */
-	if (per_next_state == PWRDM_POWER_OFF)
-		cpu_cluster_pm_enter();
+	if (per_next_state == PWRDM_POWER_OFF) {
+		error = cpu_cluster_pm_enter();
+		if (error)
+			return;
+	}
 
 	/* CORE */
 	if (core_next_state < PWRDM_POWER_ON) {
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 0d0a731..8b09cda 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -91,12 +91,6 @@ static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction omap2_gp_timer_irq = {
-	.name		= "gp_timer",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= omap2_gp_timer_interrupt,
-};
-
 static int omap2_gp_timer_set_next_event(unsigned long cycles,
 					 struct clock_event_device *evt)
 {
@@ -382,8 +376,9 @@ static void __init omap2_gp_clockevent_init(int gptimer_id,
 				     &clockevent_gpt.name, OMAP_TIMER_POSTED);
 	BUG_ON(res);
 
-	omap2_gp_timer_irq.dev_id = &clkev;
-	setup_irq(clkev.irq, &omap2_gp_timer_irq);
+	if (request_irq(clkev.irq, omap2_gp_timer_interrupt,
+			IRQF_TIMER | IRQF_IRQPOLL, "gp_timer", &clkev))
+		pr_err("Failed to request irq %d (gp_timer)\n", clkev.irq);
 
 	__omap_dm_timer_int_enable(&clkev, OMAP_TIMER_INT_OVERFLOW);
 
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index cf9cb3d..e94a619 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -3,7 +3,6 @@
 	bool "Marvell Orion"
 	depends on MMU && ARCH_MULTI_V5
 	select CPU_FEROCEON
-	select GENERIC_CLOCKEVENTS
 	select GPIOLIB
 	select MVEBU_MBUS
 	select FORCE_PCI
@@ -18,7 +17,6 @@
 
 config ARCH_ORION5X_DT
 	bool "Marvell Orion5x Flattened Device Tree"
-	select USE_OF
 	select ORION_CLK
 	select ORION_IRQCHIP
 	select ORION_TIMER
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index fda9b75..a39764f 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -398,7 +398,6 @@ static int ts78xx_fpga_load_devices(void)
 
 static int ts78xx_fpga_unload_devices(void)
 {
-	int ret = 0;
 
 	if (ts78xx_fpga.supports.ts_rtc.present == 1)
 		ts78xx_ts_rtc_unload();
@@ -407,7 +406,7 @@ static int ts78xx_fpga_unload_devices(void)
 	if (ts78xx_fpga.supports.ts_rng.present == 1)
 		ts78xx_ts_rng_unload();
 
-	return ret;
+	return 0;
 }
 
 static int ts78xx_fpga_load(void)
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 425855f..2e35354 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -312,7 +312,6 @@ static struct pwm_lookup cm_x300_pwm_lookup[] = {
 static struct platform_pwm_backlight_data cm_x300_backlight_data = {
 	.max_brightness	= 100,
 	.dft_brightness	= 100,
-	.enable_gpio	= -1,
 };
 
 static struct platform_device cm_x300_backlight_device = {
diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c
index dbad2f1..e5879e8 100644
--- a/arch/arm/mach-pxa/colibri-pxa270-income.c
+++ b/arch/arm/mach-pxa/colibri-pxa270-income.c
@@ -202,7 +202,6 @@ static struct pwm_lookup income_pwm_lookup[] = {
 static struct platform_pwm_backlight_data income_backlight_data = {
 	.max_brightness	= 0x3ff,
 	.dft_brightness	= 0x1ff,
-	.enable_gpio	= -1,
 };
 
 static struct platform_device income_backlight = {
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index f2d7328..593c7f7 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -563,13 +563,20 @@ static void corgi_bl_kick_battery(void)
 	}
 }
 
+static struct gpiod_lookup_table corgi_lcdcon_gpio_table = {
+	.dev_id = "spi1.1",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa", CORGI_GPIO_BACKLIGHT_CONT,
+			    "BL_CONT", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static struct corgi_lcd_platform_data corgi_lcdcon_info = {
 	.init_mode		= CORGI_LCD_MODE_VGA,
 	.max_intensity		= 0x2f,
 	.default_intensity	= 0x1f,
 	.limit_mask		= 0x0b,
-	.gpio_backlight_cont	= CORGI_GPIO_BACKLIGHT_CONT,
-	.gpio_backlight_on	= -1,
 	.kick_battery		= corgi_bl_kick_battery,
 };
 
@@ -609,6 +616,7 @@ static struct spi_board_info corgi_spi_devices[] = {
 static void __init corgi_init_spi(void)
 {
 	pxa2xx_set_spi_info(1, &corgi_spi_info);
+	gpiod_add_lookup_table(&corgi_lcdcon_gpio_table);
 	spi_register_board_info(ARRAY_AND_SIZE(corgi_spi_devices));
 }
 #else
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index ec10851..eb85950 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -55,7 +55,6 @@ static struct pwm_lookup ezx_pwm_lookup[] __maybe_unused = {
 static struct platform_pwm_backlight_data ezx_backlight_data = {
 	.max_brightness	= 1023,
 	.dft_brightness	= 1023,
-	.enable_gpio	= -1,
 };
 
 static struct platform_device ezx_backlight_device = {
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 238a751..1d4c5db 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -556,7 +556,6 @@ static struct platform_device hx4700_lcd = {
 static struct platform_pwm_backlight_data backlight_data = {
 	.max_brightness = 200,
 	.dft_brightness = 100,
-	.enable_gpio    = -1,
 };
 
 static struct platform_device backlight = {
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index 20e00e9..6fc40bc 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -277,7 +277,6 @@ static struct pwm_lookup lpd270_pwm_lookup[] = {
 static struct platform_pwm_backlight_data lpd270_backlight_data = {
 	.max_brightness	= 1,
 	.dft_brightness	= 1,
-	.enable_gpio	= -1,
 };
 
 static struct platform_device lpd270_backlight_device = {
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 5d0591f..cd9fa46 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -401,7 +401,6 @@ static void magician_backlight_exit(struct device *dev)
 static struct platform_pwm_backlight_data backlight_data = {
 	.max_brightness	= 272,
 	.dft_brightness	= 100,
-	.enable_gpio	= -1,
 	.init		= magician_backlight_init,
 	.notify		= magician_backlight_notify,
 	.exit		= magician_backlight_exit,
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 1b78829..d1010ec 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -256,7 +256,6 @@ static struct pwm_lookup mainstone_pwm_lookup[] = {
 static struct platform_pwm_backlight_data mainstone_backlight_data = {
 	.max_brightness	= 1023,
 	.dft_brightness	= 1023,
-	.enable_gpio	= -1,
 };
 
 static struct platform_device mainstone_backlight_device = {
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 0b8bae9..d3af803 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -176,7 +176,6 @@ static struct pwm_lookup mioa701_pwm_lookup[] = {
 static struct platform_pwm_backlight_data mioa701_backlight_data = {
 	.max_brightness	= 100,
 	.dft_brightness	= 50,
-	.enable_gpio	= -1,
 };
 
 /*
diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c
index b600b63..0d246a1 100644
--- a/arch/arm/mach-pxa/palm27x.c
+++ b/arch/arm/mach-pxa/palm27x.c
@@ -318,7 +318,6 @@ static void palm27x_backlight_exit(struct device *dev)
 static struct platform_pwm_backlight_data palm27x_backlight_data = {
 	.max_brightness	= 0xfe,
 	.dft_brightness	= 0x7e,
-	.enable_gpio	= -1,
 	.init		= palm27x_backlight_init,
 	.notify		= palm27x_backlight_notify,
 	.exit		= palm27x_backlight_exit,
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index fda9dea..455cb8c 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -174,6 +174,15 @@ static inline void palmtc_keys_init(void) {}
  * Backlight
  ******************************************************************************/
 #if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+
+static struct gpiod_lookup_table palmtc_pwm_bl_gpio_table = {
+	.dev_id = "pwm-backlight.0",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTC_BL_POWER,
+			    "enable", GPIO_ACTIVE_HIGH),
+	},
+};
+
 static struct pwm_lookup palmtc_pwm_lookup[] = {
 	PWM_LOOKUP("pxa25x-pwm.1", 0, "pwm-backlight.0", NULL, PALMTC_PERIOD_NS,
 		   PWM_POLARITY_NORMAL),
@@ -182,7 +191,6 @@ static struct pwm_lookup palmtc_pwm_lookup[] = {
 static struct platform_pwm_backlight_data palmtc_backlight_data = {
 	.max_brightness	= PALMTC_MAX_INTENSITY,
 	.dft_brightness	= PALMTC_MAX_INTENSITY,
-	.enable_gpio	= GPIO_NR_PALMTC_BL_POWER,
 };
 
 static struct platform_device palmtc_backlight = {
@@ -195,6 +203,7 @@ static struct platform_device palmtc_backlight = {
 
 static void __init palmtc_pwm_init(void)
 {
+	gpiod_add_lookup_table(&palmtc_pwm_bl_gpio_table);
 	pwm_add_table(palmtc_pwm_lookup, ARRAY_SIZE(palmtc_pwm_lookup));
 	platform_device_register(&palmtc_backlight);
 }
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index 7171014..e3bcf58 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -175,7 +175,6 @@ static void palmte2_backlight_exit(struct device *dev)
 static struct platform_pwm_backlight_data palmte2_backlight_data = {
 	.max_brightness	= PALMTE2_MAX_INTENSITY,
 	.dft_brightness	= PALMTE2_MAX_INTENSITY,
-	.enable_gpio	= -1,
 	.init		= palmte2_backlight_init,
 	.notify		= palmte2_backlight_notify,
 	.exit		= palmte2_backlight_exit,
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index cb1c567..bf613f8 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -154,7 +154,6 @@ static struct pwm_lookup pcm990_pwm_lookup[] = {
 static struct platform_pwm_backlight_data pcm990_backlight_data = {
 	.max_brightness	= 1023,
 	.dft_brightness	= 1023,
-	.enable_gpio	= -1,
 };
 
 static struct platform_device pcm990_backlight_device = {
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index a4fdc39..371008e 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -525,13 +525,33 @@ static void spitz_bl_kick_battery(void)
 	}
 }
 
+static struct gpiod_lookup_table spitz_lcdcon_gpio_table = {
+	.dev_id = "spi2.1",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_BACKLIGHT_CONT,
+			    "BL_CONT", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_BACKLIGHT_ON,
+			    "BL_ON", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table akita_lcdcon_gpio_table = {
+	.dev_id = "spi2.1",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa", AKITA_GPIO_BACKLIGHT_CONT,
+			    "BL_CONT", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("gpio-pxa", AKITA_GPIO_BACKLIGHT_ON,
+			    "BL_ON", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static struct corgi_lcd_platform_data spitz_lcdcon_info = {
 	.init_mode		= CORGI_LCD_MODE_VGA,
 	.max_intensity		= 0x2f,
 	.default_intensity	= 0x1f,
 	.limit_mask		= 0x0b,
-	.gpio_backlight_cont	= SPITZ_GPIO_BACKLIGHT_CONT,
-	.gpio_backlight_on	= SPITZ_GPIO_BACKLIGHT_ON,
 	.kick_battery		= spitz_bl_kick_battery,
 };
 
@@ -574,12 +594,10 @@ static struct pxa2xx_spi_controller spitz_spi_info = {
 
 static void __init spitz_spi_init(void)
 {
-	struct corgi_lcd_platform_data *lcd_data = &spitz_lcdcon_info;
-
-	if (machine_is_akita()) {
-		lcd_data->gpio_backlight_cont = AKITA_GPIO_BACKLIGHT_CONT;
-		lcd_data->gpio_backlight_on = AKITA_GPIO_BACKLIGHT_ON;
-	}
+	if (machine_is_akita())
+		gpiod_add_lookup_table(&akita_lcdcon_gpio_table);
+	else
+		gpiod_add_lookup_table(&spitz_lcdcon_gpio_table);
 
 	pxa2xx_set_spi_info(2, &spitz_spi_info);
 	spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices));
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index 93466fa..a15eb3b 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -178,13 +178,11 @@ static struct platform_pwm_backlight_data tavorevb_backlight_data[] = {
 		/* primary backlight */
 		.max_brightness	= 100,
 		.dft_brightness	= 100,
-		.enable_gpio	= -1,
 	},
 	[1] = {
 		/* secondary backlight */
 		.max_brightness	= 100,
 		.dft_brightness	= 100,
-		.enable_gpio	= -1,
 	},
 };
 
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index c06031d..3aa34e9 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -404,7 +404,6 @@ static void viper_backlight_exit(struct device *dev)
 static struct platform_pwm_backlight_data viper_backlight_data = {
 	.max_brightness	= 100,
 	.dft_brightness	= 100,
-	.enable_gpio	= -1,
 	.init		= viper_backlight_init,
 	.notify		= viper_backlight_notify,
 	.exit		= viper_backlight_exit,
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index 900cefc..21fd76b 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -210,13 +210,11 @@ static struct platform_pwm_backlight_data z2_backlight_data[] = {
 		/* Keypad Backlight */
 		.max_brightness	= 1023,
 		.dft_brightness	= 0,
-		.enable_gpio	= -1,
 	},
 	[1] = {
 		/* LCD Backlight */
 		.max_brightness	= 1023,
 		.dft_brightness	= 512,
-		.enable_gpio	= -1,
 	},
 };
 
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index bf2ab5b..79f0025 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -117,7 +117,6 @@ static struct pwm_lookup zylonite_pwm_lookup[] = {
 static struct platform_pwm_backlight_data zylonite_backlight_data = {
 	.max_brightness	= 100,
 	.dft_brightness	= 100,
-	.enable_gpio	= -1,
 };
 
 static struct platform_device zylonite_backlight_device = {
diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig
index ecbf3c4..1772ecc 100644
--- a/arch/arm/mach-qcom/Kconfig
+++ b/arch/arm/mach-qcom/Kconfig
@@ -12,6 +12,11 @@
 
 if ARCH_QCOM
 
+config ARCH_IPQ40XX
+	bool "Enable support for IPQ40XX"
+	select CLKSRC_QCOM
+	select HAVE_ARM_ARCH_TIMER
+
 config ARCH_MSM8X60
 	bool "Enable support for MSM8X60"
 	select CLKSRC_QCOM
diff --git a/arch/arm/mach-rpc/time.c b/arch/arm/mach-rpc/time.c
index 1d75015..da85cac 100644
--- a/arch/arm/mach-rpc/time.c
+++ b/arch/arm/mach-rpc/time.c
@@ -85,11 +85,6 @@ ioc_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction ioc_timer_irq = {
-	.name		= "timer",
-	.handler	= ioc_timer_interrupt
-};
-
 /*
  * Set up timer interrupt.
  */
@@ -97,5 +92,6 @@ void __init ioc_timer_init(void)
 {
 	WARN_ON(clocksource_register_hz(&ioctime_clocksource, RPC_CLOCK_FREQ));
 	ioctime_init();
-	setup_irq(IRQ_TIMER0, &ioc_timer_irq);
+	if (request_irq(IRQ_TIMER0, ioc_timer_interrupt, 0, "timer", NULL))
+		pr_err("Failed to request irq %d (timer)\n", IRQ_TIMER0);
 }
diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c
index 74d6b68..e1c372e 100644
--- a/arch/arm/mach-s3c24xx/mach-h1940.c
+++ b/arch/arm/mach-s3c24xx/mach-h1940.c
@@ -516,7 +516,6 @@ static void h1940_backlight_exit(struct device *dev)
 static struct platform_pwm_backlight_data backlight_data = {
 	.max_brightness = 100,
 	.dft_brightness = 50,
-	.enable_gpio    = -1,
 	.init           = h1940_backlight_init,
 	.notify		= h1940_backlight_notify,
 	.exit           = h1940_backlight_exit,
diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
index 03d8f27..fde98b1 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -534,7 +534,6 @@ static int rx1950_backlight_notify(struct device *dev, int brightness)
 static struct platform_pwm_backlight_data rx1950_backlight_data = {
 	.max_brightness = 24,
 	.dft_brightness = 4,
-	.enable_gpio = -1,
 	.init = rx1950_backlight_init,
 	.notify = rx1950_backlight_notify,
 	.exit = rx1950_backlight_exit,
diff --git a/arch/arm/mach-s3c64xx/dev-backlight.c b/arch/arm/mach-s3c64xx/dev-backlight.c
index 799cfdf..09e6da30 100644
--- a/arch/arm/mach-s3c64xx/dev-backlight.c
+++ b/arch/arm/mach-s3c64xx/dev-backlight.c
@@ -65,7 +65,6 @@ static struct samsung_bl_drvdata samsung_dfl_bl_data __initdata = {
 	.plat_data = {
 		.max_brightness = 255,
 		.dft_brightness = 255,
-		.enable_gpio    = -1,
 		.init           = samsung_bl_init,
 		.exit           = samsung_bl_exit,
 	},
@@ -111,8 +110,6 @@ void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
 		samsung_bl_data->dft_brightness = bl_data->dft_brightness;
 	if (bl_data->lth_brightness)
 		samsung_bl_data->lth_brightness = bl_data->lth_brightness;
-	if (bl_data->enable_gpio >= 0)
-		samsung_bl_data->enable_gpio = bl_data->enable_gpio;
 	if (bl_data->init)
 		samsung_bl_data->init = bl_data->init;
 	if (bl_data->notify)
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 8ec6a4f..da96542 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -114,7 +114,6 @@ static struct pwm_lookup crag6410_pwm_lookup[] = {
 static struct platform_pwm_backlight_data crag6410_backlight_data = {
 	.max_brightness	= 1000,
 	.dft_brightness	= 600,
-	.enable_gpio	= -1,
 };
 
 static struct platform_device crag6410_backlight_device = {
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index bfe9881..e708021 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -115,7 +115,6 @@ static void hmt_bl_exit(struct device *dev)
 static struct platform_pwm_backlight_data hmt_backlight_data = {
 	.max_brightness	= 100 * 256,
 	.dft_brightness	= 40 * 256,
-	.enable_gpio	= -1,
 	.init		= hmt_bl_init,
 	.notify		= hmt_bl_notify,
 	.exit		= hmt_bl_exit,
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index 829d5db..5025db6 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -150,7 +150,6 @@ static int smartq_bl_init(struct device *dev)
 static struct platform_pwm_backlight_data smartq_backlight_data = {
 	.max_brightness	= 1000,
 	.dft_brightness	= 600,
-	.enable_gpio	= -1,
 	.init		= smartq_bl_init,
 };
 
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index 908e5aa..56f406c 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -623,7 +623,7 @@ static struct pwm_lookup smdk6410_pwm_lookup[] = {
 };
 
 static struct platform_pwm_backlight_data smdk6410_bl_data = {
-	.enable_gpio = -1,
+	/* Intentionally blank */
 };
 
 static struct dwc2_hsotg_plat smdk6410_hsotg_pdata;
diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index b13ec90..86406e3 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -72,7 +72,6 @@ static const char *const r8a7779_compat_dt[] __initconst = {
 DT_MACHINE_START(R8A7779_DT, "Generic R8A7779 (Flattened Device Tree)")
 	.smp		= smp_ops(r8a7779_smp_ops),
 	.map_io		= r8a7779_map_io,
-	.init_early	= shmobile_init_delay,
 	.init_irq	= r8a7779_init_irq_dt,
 	.init_late	= shmobile_init_late,
 	.dt_compat	= r8a7779_compat_dt,
diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c
index 2fd3aa6..1ee5cd2 100644
--- a/arch/arm/mach-shmobile/setup-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c
@@ -7,7 +7,6 @@
  * Copyright (C) 2014  Ulrich Hecht
  */
 
-#include <linux/clk-provider.h>
 #include <linux/clocksource.h>
 #include <linux/device.h>
 #include <linux/dma-contiguous.h>
@@ -15,6 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/memblock.h>
 #include <linux/of.h>
+#include <linux/of_clk.h>
 #include <linux/of_fdt.h>
 #include <linux/of_platform.h>
 #include <linux/psci.h>
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index cc08aa7..eb4a62f 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -56,7 +56,6 @@ static const char *const sh73a0_boards_compat_dt[] __initconst = {
 DT_MACHINE_START(SH73A0_DT, "Generic SH73A0 (Flattened Device Tree)")
 	.smp		= smp_ops(sh73a0_smp_ops),
 	.map_io		= sh73a0_map_io,
-	.init_early	= shmobile_init_delay,
 	.init_machine	= sh73a0_generic_init,
 	.init_late	= shmobile_init_late,
 	.dt_compat	= sh73a0_boards_compat_dt,
diff --git a/arch/arm/mach-spear/time.c b/arch/arm/mach-spear/time.c
index 289e036..d1fdb60 100644
--- a/arch/arm/mach-spear/time.c
+++ b/arch/arm/mach-spear/time.c
@@ -181,12 +181,6 @@ static irqreturn_t spear_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction spear_timer_irq = {
-	.name = "timer",
-	.flags = IRQF_TIMER,
-	.handler = spear_timer_interrupt
-};
-
 static void __init spear_clockevent_init(int irq)
 {
 	u32 tick_rate;
@@ -201,7 +195,8 @@ static void __init spear_clockevent_init(int irq)
 
 	clockevents_config_and_register(&clkevt, tick_rate, 3, 0xfff0);
 
-	setup_irq(irq, &spear_timer_irq);
+	if (request_irq(irq, spear_timer_interrupt, IRQF_TIMER, "timer", NULL))
+		pr_err("Failed to request irq %d (timer)\n", irq);
 }
 
 static const struct of_device_id timer_of_match[] __initconst = {
diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
index 933b693..06da274 100644
--- a/arch/arm/mach-sunxi/sunxi.c
+++ b/arch/arm/mach-sunxi/sunxi.c
@@ -10,9 +10,9 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <linux/clk-provider.h>
 #include <linux/clocksource.h>
 #include <linux/init.h>
+#include <linux/of_clk.h>
 #include <linux/platform_device.h>
 #include <linux/reset/sunxi.h>
 
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index 6c1dff2..07572b5 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -8,29 +8,14 @@
 obj-y					+= reset-handler.o
 obj-y					+= sleep.o
 obj-y					+= tegra.o
-obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
-obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= sleep-tegra20.o
+obj-y					+= sleep-tegra20.o
+obj-y					+= sleep-tegra30.o
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= pm-tegra20.o
-ifeq ($(CONFIG_CPU_IDLE),y)
-obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= cpuidle-tegra20.o
-endif
-obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= sleep-tegra30.o
 obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= pm-tegra30.o
-ifeq ($(CONFIG_CPU_IDLE),y)
-obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= cpuidle-tegra30.o
-endif
 obj-$(CONFIG_SMP)			+= platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)               += hotplug.o
 
-obj-$(CONFIG_ARCH_TEGRA_114_SOC)	+= sleep-tegra30.o
 obj-$(CONFIG_ARCH_TEGRA_114_SOC)	+= pm-tegra30.o
-ifeq ($(CONFIG_CPU_IDLE),y)
-obj-$(CONFIG_ARCH_TEGRA_114_SOC)	+= cpuidle-tegra114.o
-endif
-obj-$(CONFIG_ARCH_TEGRA_124_SOC)	+= sleep-tegra30.o
 obj-$(CONFIG_ARCH_TEGRA_124_SOC)	+= pm-tegra30.o
-ifeq ($(CONFIG_CPU_IDLE),y)
-obj-$(CONFIG_ARCH_TEGRA_124_SOC)	+= cpuidle-tegra114.o
-endif
 
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= board-paz00.o
diff --git a/arch/arm/mach-tegra/cpuidle-tegra114.c b/arch/arm/mach-tegra/cpuidle-tegra114.c
deleted file mode 100644
index 5118f77..0000000
--- a/arch/arm/mach-tegra/cpuidle-tegra114.c
+++ /dev/null
@@ -1,89 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2013, NVIDIA Corporation. All rights reserved.
- */
-
-#include <asm/firmware.h>
-#include <linux/tick.h>
-#include <linux/cpuidle.h>
-#include <linux/cpu_pm.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include <linux/firmware/trusted_foundations.h>
-
-#include <asm/cpuidle.h>
-#include <asm/smp_plat.h>
-#include <asm/suspend.h>
-#include <asm/psci.h>
-
-#include "cpuidle.h"
-#include "pm.h"
-#include "sleep.h"
-
-#ifdef CONFIG_PM_SLEEP
-#define TEGRA114_MAX_STATES 2
-#else
-#define TEGRA114_MAX_STATES 1
-#endif
-
-#ifdef CONFIG_PM_SLEEP
-static int tegra114_idle_power_down(struct cpuidle_device *dev,
-				    struct cpuidle_driver *drv,
-				    int index)
-{
-	local_fiq_disable();
-
-	tegra_set_cpu_in_lp2();
-	cpu_pm_enter();
-
-	call_firmware_op(prepare_idle, TF_PM_MODE_LP2_NOFLUSH_L2);
-
-	/* Do suspend by ourselves if the firmware does not implement it */
-	if (call_firmware_op(do_idle, 0) == -ENOSYS)
-		cpu_suspend(0, tegra30_sleep_cpu_secondary_finish);
-
-	cpu_pm_exit();
-	tegra_clear_cpu_in_lp2();
-
-	local_fiq_enable();
-
-	return index;
-}
-
-static void tegra114_idle_enter_s2idle(struct cpuidle_device *dev,
-				       struct cpuidle_driver *drv,
-				       int index)
-{
-       tegra114_idle_power_down(dev, drv, index);
-}
-#endif
-
-static struct cpuidle_driver tegra_idle_driver = {
-	.name = "tegra_idle",
-	.owner = THIS_MODULE,
-	.state_count = TEGRA114_MAX_STATES,
-	.states = {
-		[0] = ARM_CPUIDLE_WFI_STATE_PWR(600),
-#ifdef CONFIG_PM_SLEEP
-		[1] = {
-			.enter			= tegra114_idle_power_down,
-			.enter_s2idle		= tegra114_idle_enter_s2idle,
-			.exit_latency		= 500,
-			.target_residency	= 1000,
-			.flags			= CPUIDLE_FLAG_TIMER_STOP,
-			.power_usage		= 0,
-			.name			= "powered-down",
-			.desc			= "CPU power gated",
-		},
-#endif
-	},
-};
-
-int __init tegra114_cpuidle_init(void)
-{
-	if (!psci_smp_available())
-		return cpuidle_register(&tegra_idle_driver, NULL);
-
-	return 0;
-}
diff --git a/arch/arm/mach-tegra/cpuidle-tegra20.c b/arch/arm/mach-tegra/cpuidle-tegra20.c
deleted file mode 100644
index 69f3fa2..0000000
--- a/arch/arm/mach-tegra/cpuidle-tegra20.c
+++ /dev/null
@@ -1,212 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * CPU idle driver for Tegra CPUs
- *
- * Copyright (c) 2010-2012, NVIDIA Corporation.
- * Copyright (c) 2011 Google, Inc.
- * Author: Colin Cross <ccross@android.com>
- *         Gary King <gking@nvidia.com>
- *
- * Rework for 3.3 by Peter De Schrijver <pdeschrijver@nvidia.com>
- */
-
-#include <linux/clk/tegra.h>
-#include <linux/tick.h>
-#include <linux/cpuidle.h>
-#include <linux/cpu_pm.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include <soc/tegra/flowctrl.h>
-
-#include <asm/cpuidle.h>
-#include <asm/smp_plat.h>
-#include <asm/suspend.h>
-
-#include "cpuidle.h"
-#include "iomap.h"
-#include "irq.h"
-#include "pm.h"
-#include "reset.h"
-#include "sleep.h"
-
-#ifdef CONFIG_PM_SLEEP
-static bool abort_flag;
-static atomic_t abort_barrier;
-static int tegra20_idle_lp2_coupled(struct cpuidle_device *dev,
-				    struct cpuidle_driver *drv,
-				    int index);
-#define TEGRA20_MAX_STATES 2
-#else
-#define TEGRA20_MAX_STATES 1
-#endif
-
-static struct cpuidle_driver tegra_idle_driver = {
-	.name = "tegra_idle",
-	.owner = THIS_MODULE,
-	.states = {
-		ARM_CPUIDLE_WFI_STATE_PWR(600),
-#ifdef CONFIG_PM_SLEEP
-		{
-			.enter            = tegra20_idle_lp2_coupled,
-			.exit_latency     = 5000,
-			.target_residency = 10000,
-			.power_usage      = 0,
-			.flags            = CPUIDLE_FLAG_COUPLED |
-			                    CPUIDLE_FLAG_TIMER_STOP,
-			.name             = "powered-down",
-			.desc             = "CPU power gated",
-		},
-#endif
-	},
-	.state_count = TEGRA20_MAX_STATES,
-	.safe_state_index = 0,
-};
-
-#ifdef CONFIG_PM_SLEEP
-#ifdef CONFIG_SMP
-static int tegra20_reset_sleeping_cpu_1(void)
-{
-	int ret = 0;
-
-	tegra_pen_lock();
-
-	if (readb(tegra20_cpu1_resettable_status) == CPU_RESETTABLE)
-		tegra20_cpu_shutdown(1);
-	else
-		ret = -EINVAL;
-
-	tegra_pen_unlock();
-
-	return ret;
-}
-
-static void tegra20_wake_cpu1_from_reset(void)
-{
-	tegra_pen_lock();
-
-	tegra20_cpu_clear_resettable();
-
-	/* enable cpu clock on cpu */
-	tegra_enable_cpu_clock(1);
-
-	/* take the CPU out of reset */
-	tegra_cpu_out_of_reset(1);
-
-	/* unhalt the cpu */
-	flowctrl_write_cpu_halt(1, 0);
-
-	tegra_pen_unlock();
-}
-
-static int tegra20_reset_cpu_1(void)
-{
-	if (!cpu_online(1) || !tegra20_reset_sleeping_cpu_1())
-		return 0;
-
-	tegra20_wake_cpu1_from_reset();
-	return -EBUSY;
-}
-#else
-static inline void tegra20_wake_cpu1_from_reset(void)
-{
-}
-
-static inline int tegra20_reset_cpu_1(void)
-{
-	return 0;
-}
-#endif
-
-static bool tegra20_cpu_cluster_power_down(struct cpuidle_device *dev,
-					   struct cpuidle_driver *drv,
-					   int index)
-{
-	while (tegra20_cpu_is_resettable_soon())
-		cpu_relax();
-
-	if (tegra20_reset_cpu_1() || !tegra_cpu_rail_off_ready())
-		return false;
-
-	tegra_idle_lp2_last();
-
-	if (cpu_online(1))
-		tegra20_wake_cpu1_from_reset();
-
-	return true;
-}
-
-#ifdef CONFIG_SMP
-static bool tegra20_idle_enter_lp2_cpu_1(struct cpuidle_device *dev,
-					 struct cpuidle_driver *drv,
-					 int index)
-{
-	cpu_suspend(0, tegra20_sleep_cpu_secondary_finish);
-
-	tegra20_cpu_clear_resettable();
-
-	return true;
-}
-#else
-static inline bool tegra20_idle_enter_lp2_cpu_1(struct cpuidle_device *dev,
-						struct cpuidle_driver *drv,
-						int index)
-{
-	return true;
-}
-#endif
-
-static int tegra20_idle_lp2_coupled(struct cpuidle_device *dev,
-				    struct cpuidle_driver *drv,
-				    int index)
-{
-	bool entered_lp2 = false;
-
-	if (tegra_pending_sgi())
-		WRITE_ONCE(abort_flag, true);
-
-	cpuidle_coupled_parallel_barrier(dev, &abort_barrier);
-
-	if (abort_flag) {
-		cpuidle_coupled_parallel_barrier(dev, &abort_barrier);
-		abort_flag = false;	/* clean flag for next coming */
-		return -EINTR;
-	}
-
-	local_fiq_disable();
-
-	tegra_set_cpu_in_lp2();
-	cpu_pm_enter();
-
-	if (dev->cpu == 0)
-		entered_lp2 = tegra20_cpu_cluster_power_down(dev, drv, index);
-	else
-		entered_lp2 = tegra20_idle_enter_lp2_cpu_1(dev, drv, index);
-
-	cpu_pm_exit();
-	tegra_clear_cpu_in_lp2();
-
-	local_fiq_enable();
-
-	smp_rmb();
-
-	return entered_lp2 ? index : 0;
-}
-#endif
-
-/*
- * Tegra20 HW appears to have a bug such that PCIe device interrupts, whether
- * they are legacy IRQs or MSI, are lost when LP2 is enabled. To work around
- * this, simply disable LP2 if the PCI driver and DT node are both enabled.
- */
-void tegra20_cpuidle_pcie_irqs_in_use(void)
-{
-	pr_info_once(
-		"Disabling cpuidle LP2 state, since PCIe IRQs are in use\n");
-	cpuidle_driver_state_disabled(&tegra_idle_driver, 1, true);
-}
-
-int __init tegra20_cpuidle_init(void)
-{
-	return cpuidle_register(&tegra_idle_driver, cpu_possible_mask);
-}
diff --git a/arch/arm/mach-tegra/cpuidle-tegra30.c b/arch/arm/mach-tegra/cpuidle-tegra30.c
deleted file mode 100644
index c612852..0000000
--- a/arch/arm/mach-tegra/cpuidle-tegra30.c
+++ /dev/null
@@ -1,132 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * CPU idle driver for Tegra CPUs
- *
- * Copyright (c) 2010-2012, NVIDIA Corporation.
- * Copyright (c) 2011 Google, Inc.
- * Author: Colin Cross <ccross@android.com>
- *         Gary King <gking@nvidia.com>
- *
- * Rework for 3.3 by Peter De Schrijver <pdeschrijver@nvidia.com>
- */
-
-#include <linux/clk/tegra.h>
-#include <linux/tick.h>
-#include <linux/cpuidle.h>
-#include <linux/cpu_pm.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include <asm/cpuidle.h>
-#include <asm/smp_plat.h>
-#include <asm/suspend.h>
-
-#include "cpuidle.h"
-#include "pm.h"
-#include "sleep.h"
-
-#ifdef CONFIG_PM_SLEEP
-static int tegra30_idle_lp2(struct cpuidle_device *dev,
-			    struct cpuidle_driver *drv,
-			    int index);
-#endif
-
-static struct cpuidle_driver tegra_idle_driver = {
-	.name = "tegra_idle",
-	.owner = THIS_MODULE,
-#ifdef CONFIG_PM_SLEEP
-	.state_count = 2,
-#else
-	.state_count = 1,
-#endif
-	.states = {
-		[0] = ARM_CPUIDLE_WFI_STATE_PWR(600),
-#ifdef CONFIG_PM_SLEEP
-		[1] = {
-			.enter			= tegra30_idle_lp2,
-			.exit_latency		= 2000,
-			.target_residency	= 2200,
-			.power_usage		= 0,
-			.flags			= CPUIDLE_FLAG_TIMER_STOP,
-			.name			= "powered-down",
-			.desc			= "CPU power gated",
-		},
-#endif
-	},
-};
-
-#ifdef CONFIG_PM_SLEEP
-static bool tegra30_cpu_cluster_power_down(struct cpuidle_device *dev,
-					   struct cpuidle_driver *drv,
-					   int index)
-{
-	/* All CPUs entering LP2 is not working.
-	 * Don't let CPU0 enter LP2 when any secondary CPU is online.
-	 */
-	if (num_online_cpus() > 1 || !tegra_cpu_rail_off_ready()) {
-		cpu_do_idle();
-		return false;
-	}
-
-	tegra_idle_lp2_last();
-
-	return true;
-}
-
-#ifdef CONFIG_SMP
-static bool tegra30_cpu_core_power_down(struct cpuidle_device *dev,
-					struct cpuidle_driver *drv,
-					int index)
-{
-	smp_wmb();
-
-	cpu_suspend(0, tegra30_sleep_cpu_secondary_finish);
-
-	return true;
-}
-#else
-static inline bool tegra30_cpu_core_power_down(struct cpuidle_device *dev,
-					       struct cpuidle_driver *drv,
-					       int index)
-{
-	return true;
-}
-#endif
-
-static int tegra30_idle_lp2(struct cpuidle_device *dev,
-			    struct cpuidle_driver *drv,
-			    int index)
-{
-	bool entered_lp2 = false;
-	bool last_cpu;
-
-	local_fiq_disable();
-
-	last_cpu = tegra_set_cpu_in_lp2();
-	cpu_pm_enter();
-
-	if (dev->cpu == 0) {
-		if (last_cpu)
-			entered_lp2 = tegra30_cpu_cluster_power_down(dev, drv,
-								     index);
-		else
-			cpu_do_idle();
-	} else {
-		entered_lp2 = tegra30_cpu_core_power_down(dev, drv, index);
-	}
-
-	cpu_pm_exit();
-	tegra_clear_cpu_in_lp2();
-
-	local_fiq_enable();
-
-	smp_rmb();
-
-	return (entered_lp2) ? index : 0;
-}
-#endif
-
-int __init tegra30_cpuidle_init(void)
-{
-	return cpuidle_register(&tegra_idle_driver, NULL);
-}
diff --git a/arch/arm/mach-tegra/cpuidle.c b/arch/arm/mach-tegra/cpuidle.c
deleted file mode 100644
index d565c44..0000000
--- a/arch/arm/mach-tegra/cpuidle.c
+++ /dev/null
@@ -1,50 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-tegra/cpuidle.c
- *
- * CPU idle driver for Tegra CPUs
- *
- * Copyright (c) 2010-2012, NVIDIA Corporation.
- * Copyright (c) 2011 Google, Inc.
- * Author: Colin Cross <ccross@android.com>
- *         Gary King <gking@nvidia.com>
- *
- * Rework for 3.3 by Peter De Schrijver <pdeschrijver@nvidia.com>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include <soc/tegra/fuse.h>
-
-#include "cpuidle.h"
-
-void __init tegra_cpuidle_init(void)
-{
-	switch (tegra_get_chip_id()) {
-	case TEGRA20:
-		if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC))
-			tegra20_cpuidle_init();
-		break;
-	case TEGRA30:
-		if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC))
-			tegra30_cpuidle_init();
-		break;
-	case TEGRA114:
-	case TEGRA124:
-		if (IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) ||
-		    IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC))
-			tegra114_cpuidle_init();
-		break;
-	}
-}
-
-void tegra_cpuidle_pcie_irqs_in_use(void)
-{
-	switch (tegra_get_chip_id()) {
-	case TEGRA20:
-		if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC))
-			tegra20_cpuidle_pcie_irqs_in_use();
-		break;
-	}
-}
diff --git a/arch/arm/mach-tegra/cpuidle.h b/arch/arm/mach-tegra/cpuidle.h
deleted file mode 100644
index 4e1f459..0000000
--- a/arch/arm/mach-tegra/cpuidle.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (c) 2012, NVIDIA Corporation. All rights reserved.
- */
-
-#ifndef __MACH_TEGRA_CPUIDLE_H
-#define __MACH_TEGRA_CPUIDLE_H
-
-#ifdef CONFIG_CPU_IDLE
-int tegra20_cpuidle_init(void);
-void tegra20_cpuidle_pcie_irqs_in_use(void);
-int tegra30_cpuidle_init(void);
-int tegra114_cpuidle_init(void);
-void tegra_cpuidle_init(void);
-void tegra_cpuidle_pcie_irqs_in_use(void);
-#else
-static inline void tegra_cpuidle_init(void) {}
-static inline void tegra_cpuidle_pcie_irqs_in_use(void) {}
-#endif
-
-#endif
diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c
index ace7a39..4e1ee70 100644
--- a/arch/arm/mach-tegra/irq.c
+++ b/arch/arm/mach-tegra/irq.c
@@ -18,9 +18,10 @@
 #include <linux/of.h>
 #include <linux/syscore_ops.h>
 
+#include <soc/tegra/irq.h>
+
 #include "board.h"
 #include "iomap.h"
-#include "irq.h"
 
 #define SGI_MASK 0xFFFF
 
diff --git a/arch/arm/mach-tegra/irq.h b/arch/arm/mach-tegra/irq.h
deleted file mode 100644
index 7a94cf1..0000000
--- a/arch/arm/mach-tegra/irq.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (c) 2012, NVIDIA Corporation. All rights reserved.
- */
-
-#ifndef __TEGRA_IRQ_H
-#define __TEGRA_IRQ_H
-
-bool tegra_pending_sgi(void);
-
-#endif
diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c
index 3cab81b..d1e1a61 100644
--- a/arch/arm/mach-tegra/pm.c
+++ b/arch/arm/mach-tegra/pm.c
@@ -110,7 +110,7 @@ static void suspend_cpu_complex(void)
 	flowctrl_cpu_suspend_enter(cpu);
 }
 
-void tegra_clear_cpu_in_lp2(void)
+void tegra_pm_clear_cpu_in_lp2(void)
 {
 	int phy_cpu_id = cpu_logical_map(smp_processor_id());
 	u32 *cpu_in_lp2 = tegra_cpu_lp2_mask;
@@ -123,11 +123,9 @@ void tegra_clear_cpu_in_lp2(void)
 	spin_unlock(&tegra_lp2_lock);
 }
 
-bool tegra_set_cpu_in_lp2(void)
+void tegra_pm_set_cpu_in_lp2(void)
 {
 	int phy_cpu_id = cpu_logical_map(smp_processor_id());
-	bool last_cpu = false;
-	cpumask_t *cpu_lp2_mask = tegra_cpu_lp2_mask;
 	u32 *cpu_in_lp2 = tegra_cpu_lp2_mask;
 
 	spin_lock(&tegra_lp2_lock);
@@ -135,22 +133,15 @@ bool tegra_set_cpu_in_lp2(void)
 	BUG_ON((*cpu_in_lp2 & BIT(phy_cpu_id)));
 	*cpu_in_lp2 |= BIT(phy_cpu_id);
 
-	if ((phy_cpu_id == 0) && cpumask_equal(cpu_lp2_mask, cpu_online_mask))
-		last_cpu = true;
-	else if (tegra_get_chip_id() == TEGRA20 && phy_cpu_id == 1)
-		tegra20_cpu_set_resettable_soon();
-
 	spin_unlock(&tegra_lp2_lock);
-	return last_cpu;
-}
-
-int tegra_cpu_do_idle(void)
-{
-	return cpu_do_idle();
 }
 
 static int tegra_sleep_cpu(unsigned long v2p)
 {
+	if (tegra_cpu_car_ops->rail_off_ready &&
+	    WARN_ON(!tegra_cpu_rail_off_ready()))
+		return -EBUSY;
+
 	/*
 	 * L2 cache disabling using kernel API only allowed when all
 	 * secondary CPU's are offline. Cache have to be disabled with
@@ -159,9 +150,10 @@ static int tegra_sleep_cpu(unsigned long v2p)
 	 * if any of secondary CPU's is online and this is the LP2-idle
 	 * code-path only for Tegra20/30.
 	 */
-	if (trusted_foundations_registered())
-		outer_disable();
-
+#ifdef CONFIG_OUTER_CACHE
+	if (trusted_foundations_registered() && outer_cache.disable)
+		outer_cache.disable();
+#endif
 	/*
 	 * Note that besides of setting up CPU reset vector this firmware
 	 * call may also do the following, depending on the FW version:
@@ -202,14 +194,16 @@ static void tegra_pm_set(enum tegra_suspend_mode mode)
 	tegra_pmc_enter_suspend_mode(mode);
 }
 
-void tegra_idle_lp2_last(void)
+int tegra_pm_enter_lp2(void)
 {
+	int err;
+
 	tegra_pm_set(TEGRA_SUSPEND_LP2);
 
 	cpu_cluster_pm_enter();
 	suspend_cpu_complex();
 
-	cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, &tegra_sleep_cpu);
+	err = cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, &tegra_sleep_cpu);
 
 	/*
 	 * Resume L2 cache if it wasn't re-enabled early during resume,
@@ -221,6 +215,8 @@ void tegra_idle_lp2_last(void)
 
 	restore_cpu_complex();
 	cpu_cluster_pm_exit();
+
+	return err;
 }
 
 enum tegra_suspend_mode tegra_pm_validate_suspend_mode(
@@ -365,7 +361,7 @@ static int tegra_suspend_enter(suspend_state_t state)
 		tegra_suspend_enter_lp1();
 		break;
 	case TEGRA_SUSPEND_LP2:
-		tegra_set_cpu_in_lp2();
+		tegra_pm_set_cpu_in_lp2();
 		break;
 	default:
 		break;
@@ -386,7 +382,7 @@ static int tegra_suspend_enter(suspend_state_t state)
 		tegra_suspend_exit_lp1();
 		break;
 	case TEGRA_SUSPEND_LP2:
-		tegra_clear_cpu_in_lp2();
+		tegra_pm_clear_cpu_in_lp2();
 		break;
 	default:
 		break;
@@ -436,4 +432,18 @@ void __init tegra_init_suspend(void)
 
 	suspend_set_ops(&tegra_suspend_ops);
 }
+
+int tegra_pm_park_secondary_cpu(unsigned long cpu)
+{
+	if (cpu > 0) {
+		tegra_disable_clean_inv_dcache(TEGRA_FLUSH_CACHE_LOUIS);
+
+		if (tegra_get_chip_id() == TEGRA20)
+			tegra20_hotplug_shutdown();
+		else
+			tegra30_hotplug_shutdown();
+	}
+
+	return -EINVAL;
+}
 #endif
diff --git a/arch/arm/mach-tegra/pm.h b/arch/arm/mach-tegra/pm.h
index 569151b..81525f5 100644
--- a/arch/arm/mach-tegra/pm.h
+++ b/arch/arm/mach-tegra/pm.h
@@ -23,10 +23,6 @@ void tegra20_sleep_core_init(void);
 void tegra30_lp1_iram_hook(void);
 void tegra30_sleep_core_init(void);
 
-void tegra_clear_cpu_in_lp2(void);
-bool tegra_set_cpu_in_lp2(void);
-int tegra_cpu_do_idle(void);
-void tegra_idle_lp2_last(void);
 extern void (*tegra_tear_down_cpu)(void);
 
 #ifdef CONFIG_PM_SLEEP
diff --git a/arch/arm/mach-tegra/reset-handler.S b/arch/arm/mach-tegra/reset-handler.S
index e3f3481..53123ae 100644
--- a/arch/arm/mach-tegra/reset-handler.S
+++ b/arch/arm/mach-tegra/reset-handler.S
@@ -183,17 +183,6 @@
 	bleq	__die				@ CPU not present (to OS)
 #endif
 
-#ifdef CONFIG_ARCH_TEGRA_2x_SOC
-	/* Are we on Tegra20? */
-	cmp	r6, #TEGRA20
-	bne	1f
-	/* If not CPU0, don't let CPU0 reset CPU1 now that CPU1 is coming up. */
-	mov	r0, #CPU_NOT_RESETTABLE
-	cmp	r10, #0
-	strbne	r0, [r12, #RESET_DATA(RESETTABLE_STATUS)]
-1:
-#endif
-
 	/* Waking up from LP1? */
 	ldr	r8, [r12, #RESET_DATA(MASK_LP1)]
 	tst	r8, r11				@ if in_lp1
diff --git a/arch/arm/mach-tegra/reset.h b/arch/arm/mach-tegra/reset.h
index a4cfc08..5126559 100644
--- a/arch/arm/mach-tegra/reset.h
+++ b/arch/arm/mach-tegra/reset.h
@@ -16,9 +16,8 @@
 #define TEGRA_RESET_STARTUP_SECONDARY	3
 #define TEGRA_RESET_STARTUP_LP2		4
 #define TEGRA_RESET_STARTUP_LP1		5
-#define TEGRA_RESET_RESETTABLE_STATUS	6
-#define TEGRA_RESET_TF_PRESENT		7
-#define TEGRA_RESET_DATA_SIZE		8
+#define TEGRA_RESET_TF_PRESENT		6
+#define TEGRA_RESET_DATA_SIZE		7
 
 #define RESET_DATA(x)	((TEGRA_RESET_##x)*4)
 
@@ -42,10 +41,6 @@ void __tegra_cpu_reset_handler_end(void);
 	(IO_ADDRESS(TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET + \
 	((u32)&__tegra_cpu_reset_handler_data[TEGRA_RESET_MASK_LP2] - \
 	 (u32)__tegra_cpu_reset_handler_start)))
-#define tegra20_cpu1_resettable_status \
-	(IO_ADDRESS(TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET + \
-	((u32)&__tegra_cpu_reset_handler_data[TEGRA_RESET_RESETTABLE_STATUS] - \
-	 (u32)__tegra_cpu_reset_handler_start)))
 #endif
 
 #define tegra_cpu_reset_handler_offset \
diff --git a/arch/arm/mach-tegra/sleep-tegra20.S b/arch/arm/mach-tegra/sleep-tegra20.S
index 9a89f30d..0e00ba8 100644
--- a/arch/arm/mach-tegra/sleep-tegra20.S
+++ b/arch/arm/mach-tegra/sleep-tegra20.S
@@ -43,9 +43,6 @@
 #define APB_MISC_XM2CFGCPADCTRL2	0x8e4
 #define APB_MISC_XM2CFGDPADCTRL2	0x8e8
 
-#define __tegra20_cpu1_resettable_status_offset \
-	(__tegra_cpu_reset_handler_data_offset + RESET_DATA(RESETTABLE_STATUS))
-
 .macro pll_enable, rd, r_car_base, pll_base
 	ldr	\rd, [\r_car_base, #\pll_base]
 	tst	\rd, #(1 << 30)
@@ -90,10 +87,6 @@
 ENTRY(tegra20_cpu_shutdown)
 	cmp	r0, #0
 	reteq	lr			@ must not be called for CPU 0
-	mov32	r1, TEGRA_IRAM_RESET_BASE_VIRT
-	ldr	r2, =__tegra20_cpu1_resettable_status_offset
-	mov	r12, #CPU_RESETTABLE
-	strb	r12, [r1, r2]
 
 	cpu_to_halt_reg r1, r0
 	ldr	r3, =TEGRA_FLOW_CTRL_VIRT
@@ -117,107 +110,6 @@
 
 #ifdef CONFIG_PM_SLEEP
 /*
- * tegra_pen_lock
- *
- * spinlock implementation with no atomic test-and-set and no coherence
- * using Peterson's algorithm on strongly-ordered registers
- * used to synchronize a cpu waking up from wfi with entering lp2 on idle
- *
- * The reference link of Peterson's algorithm:
- * http://en.wikipedia.org/wiki/Peterson's_algorithm
- *
- * SCRATCH37 = r1 = !turn (inverted from Peterson's algorithm)
- * on cpu 0:
- * r2 = flag[0] (in SCRATCH38)
- * r3 = flag[1] (in SCRATCH39)
- * on cpu1:
- * r2 = flag[1] (in SCRATCH39)
- * r3 = flag[0] (in SCRATCH38)
- *
- * must be called with MMU on
- * corrupts r0-r3, r12
- */
-ENTRY(tegra_pen_lock)
-	mov32	r3, TEGRA_PMC_VIRT
-	cpu_id	r0
-	add	r1, r3, #PMC_SCRATCH37
-	cmp	r0, #0
-	addeq	r2, r3, #PMC_SCRATCH38
-	addeq	r3, r3, #PMC_SCRATCH39
-	addne	r2, r3, #PMC_SCRATCH39
-	addne	r3, r3, #PMC_SCRATCH38
-
-	mov	r12, #1
-	str	r12, [r2]		@ flag[cpu] = 1
-	dsb
-	str	r12, [r1]		@ !turn = cpu
-1:	dsb
-	ldr	r12, [r3]
-	cmp	r12, #1			@ flag[!cpu] == 1?
-	ldreq	r12, [r1]
-	cmpeq	r12, r0			@ !turn == cpu?
-	beq	1b			@ while !turn == cpu && flag[!cpu] == 1
-
-	ret	lr			@ locked
-ENDPROC(tegra_pen_lock)
-
-ENTRY(tegra_pen_unlock)
-	dsb
-	mov32	r3, TEGRA_PMC_VIRT
-	cpu_id	r0
-	cmp	r0, #0
-	addeq	r2, r3, #PMC_SCRATCH38
-	addne	r2, r3, #PMC_SCRATCH39
-	mov	r12, #0
-	str	r12, [r2]
-	ret     lr
-ENDPROC(tegra_pen_unlock)
-
-/*
- * tegra20_cpu_clear_resettable(void)
- *
- * Called to clear the "resettable soon" flag in IRAM variable when
- * it is expected that the secondary CPU will be idle soon.
- */
-ENTRY(tegra20_cpu_clear_resettable)
-	mov32	r1, TEGRA_IRAM_RESET_BASE_VIRT
-	ldr	r2, =__tegra20_cpu1_resettable_status_offset
-	mov	r12, #CPU_NOT_RESETTABLE
-	strb	r12, [r1, r2]
-	ret	lr
-ENDPROC(tegra20_cpu_clear_resettable)
-
-/*
- * tegra20_cpu_set_resettable_soon(void)
- *
- * Called to set the "resettable soon" flag in IRAM variable when
- * it is expected that the secondary CPU will be idle soon.
- */
-ENTRY(tegra20_cpu_set_resettable_soon)
-	mov32	r1, TEGRA_IRAM_RESET_BASE_VIRT
-	ldr	r2, =__tegra20_cpu1_resettable_status_offset
-	mov	r12, #CPU_RESETTABLE_SOON
-	strb	r12, [r1, r2]
-	ret	lr
-ENDPROC(tegra20_cpu_set_resettable_soon)
-
-/*
- * tegra20_cpu_is_resettable_soon(void)
- *
- * Returns true if the "resettable soon" flag in IRAM variable has been
- * set because it is expected that the secondary CPU will be idle soon.
- */
-ENTRY(tegra20_cpu_is_resettable_soon)
-	mov32	r1, TEGRA_IRAM_RESET_BASE_VIRT
-	ldr	r2, =__tegra20_cpu1_resettable_status_offset
-	ldrb	r12, [r1, r2]
-	cmp	r12, #CPU_RESETTABLE_SOON
-	moveq	r0, #1
-	movne	r0, #0
-	ret	lr
-ENDPROC(tegra20_cpu_is_resettable_soon)
-
-/*
  * tegra20_sleep_core_finish(unsigned long v2p)
  *
  * Enters suspend in LP0 or LP1 by turning off the mmu and jumping to
@@ -243,68 +135,6 @@
 ENDPROC(tegra20_sleep_core_finish)
 
 /*
- * tegra20_sleep_cpu_secondary_finish(unsigned long v2p)
- *
- * Enters WFI on secondary CPU by exiting coherency.
- */
-ENTRY(tegra20_sleep_cpu_secondary_finish)
-	stmfd	sp!, {r4-r11, lr}
-
-	mrc	p15, 0, r11, c1, c0, 1  @ save actlr before exiting coherency
-
-	/* Flush and disable the L1 data cache */
-	mov	r0, #TEGRA_FLUSH_CACHE_LOUIS
-	bl	tegra_disable_clean_inv_dcache
-
-	mov32	r0, TEGRA_IRAM_RESET_BASE_VIRT
-	ldr	r4, =__tegra20_cpu1_resettable_status_offset
-	mov	r3, #CPU_RESETTABLE
-	strb	r3, [r0, r4]
-
-	bl	tegra_cpu_do_idle
-
-	/*
-	 * cpu may be reset while in wfi, which will return through
-	 * tegra_resume to cpu_resume
-	 * or interrupt may wake wfi, which will return here
-	 * cpu state is unchanged - MMU is on, cache is on, coherency
-	 * is off, and the data cache is off
-	 *
-	 * r11 contains the original actlr
-	 */
-
-	bl	tegra_pen_lock
-
-	mov32	r0, TEGRA_IRAM_RESET_BASE_VIRT
-	ldr	r4, =__tegra20_cpu1_resettable_status_offset
-	mov	r3, #CPU_NOT_RESETTABLE
-	strb	r3, [r0, r4]
-
-	bl	tegra_pen_unlock
-
-	/* Re-enable the data cache */
-	mrc	p15, 0, r10, c1, c0, 0
-	orr	r10, r10, #CR_C
-	mcr	p15, 0, r10, c1, c0, 0
-	isb
-
-	mcr	p15, 0, r11, c1, c0, 1	@ reenable coherency
-
-	/* Invalidate the TLBs & BTAC */
-	mov	r1, #0
-	mcr	p15, 0, r1, c8, c3, 0	@ invalidate shared TLBs
-	mcr	p15, 0, r1, c7, c1, 6	@ invalidate shared BTAC
-	dsb
-	isb
-
-	/* the cpu was running with coherency disabled,
-	 * caches may be out of date */
-	bl	v7_flush_kern_cache_louis
-
-	ldmfd	sp!, {r4 - r11, pc}
-ENDPROC(tegra20_sleep_cpu_secondary_finish)
-
-/*
  * tegra20_tear_down_cpu
  *
  * Switches the CPU cluster to PLL-P and enters sleep.
diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S
index 02cc6ff9..e7bcf7d 100644
--- a/arch/arm/mach-tegra/sleep-tegra30.S
+++ b/arch/arm/mach-tegra/sleep-tegra30.S
@@ -265,11 +265,11 @@
 ENDPROC(tegra30_sleep_core_finish)
 
 /*
- * tegra30_sleep_cpu_secondary_finish(unsigned long v2p)
+ * tegra30_pm_secondary_cpu_suspend(unsigned long unused_arg)
  *
  * Enters LP2 on secondary CPU by exiting coherency and powergating the CPU.
  */
-ENTRY(tegra30_sleep_cpu_secondary_finish)
+ENTRY(tegra30_pm_secondary_cpu_suspend)
 	mov	r7, lr
 
 	/* Flush and disable the L1 data cache */
@@ -281,7 +281,7 @@
 	bl	tegra30_cpu_shutdown
 	mov	r0, #1                          @ never return here
 	ret	r7
-ENDPROC(tegra30_sleep_cpu_secondary_finish)
+ENDPROC(tegra30_pm_secondary_cpu_suspend)
 
 /*
  * tegra30_tear_down_cpu
diff --git a/arch/arm/mach-tegra/sleep.h b/arch/arm/mach-tegra/sleep.h
index 78ef32a90..4718a3c 100644
--- a/arch/arm/mach-tegra/sleep.h
+++ b/arch/arm/mach-tegra/sleep.h
@@ -114,29 +114,14 @@
 .endm
 
 #else
-void tegra_pen_lock(void);
-void tegra_pen_unlock(void);
 void tegra_resume(void);
 int tegra_sleep_cpu_finish(unsigned long);
 void tegra_disable_clean_inv_dcache(u32 flag);
 
-#ifdef CONFIG_HOTPLUG_CPU
 void tegra20_hotplug_shutdown(void);
 void tegra30_hotplug_shutdown(void);
-#endif
 
-void tegra20_cpu_shutdown(int cpu);
-int tegra20_cpu_is_resettable_soon(void);
-void tegra20_cpu_clear_resettable(void);
-#ifdef CONFIG_ARCH_TEGRA_2x_SOC
-void tegra20_cpu_set_resettable_soon(void);
-#else
-static inline void tegra20_cpu_set_resettable_soon(void) {}
-#endif
-
-int tegra20_sleep_cpu_secondary_finish(unsigned long);
 void tegra20_tear_down_cpu(void);
-int tegra30_sleep_cpu_secondary_finish(unsigned long);
 void tegra30_tear_down_cpu(void);
 
 #endif
diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c
index e512e60..f1ce285 100644
--- a/arch/arm/mach-tegra/tegra.c
+++ b/arch/arm/mach-tegra/tegra.c
@@ -36,13 +36,12 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach-types.h>
+#include <asm/psci.h>
 #include <asm/setup.h>
 
 #include "board.h"
 #include "common.h"
-#include "cpuidle.h"
 #include "iomap.h"
-#include "irq.h"
 #include "pm.h"
 #include "reset.h"
 #include "sleep.h"
@@ -86,7 +85,6 @@ static void __init tegra_dt_init(void)
 static void __init tegra_dt_init_late(void)
 {
 	tegra_init_suspend();
-	tegra_cpuidle_init();
 
 	if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) &&
 	    of_machine_is_compatible("compal,paz00"))
@@ -95,6 +93,9 @@ static void __init tegra_dt_init_late(void)
 	if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) &&
 	    of_machine_is_compatible("nvidia,tegra20"))
 		platform_device_register_simple("tegra20-cpufreq", -1, NULL, 0);
+
+	if (IS_ENABLED(CONFIG_ARM_TEGRA_CPUIDLE) && !psci_smp_available())
+		platform_device_register_simple("tegra-cpuidle", -1, NULL, 0);
 }
 
 static const char * const tegra_dt_board_compat[] = {
diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index 3a4248f..a9dd2f7 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -12,10 +12,10 @@
 #include <linux/cpumask.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
-#include <linux/clk-provider.h>
 #include <linux/clk/zynq.h>
 #include <linux/clocksource.h>
 #include <linux/of_address.h>
+#include <linux/of_clk.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/of.h>
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 9414d72f..8a89491 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -179,6 +179,23 @@ static void arm_dma_sync_single_for_device(struct device *dev,
 	__dma_page_cpu_to_dev(page, offset, size, dir);
 }
 
+/*
+ * Return whether the given device DMA address mask can be supported
+ * properly.  For example, if your device can only drive the low 24-bits
+ * during bus mastering, then you would pass 0x00ffffff as the mask
+ * to this function.
+ */
+static int arm_dma_supported(struct device *dev, u64 mask)
+{
+	unsigned long max_dma_pfn = min(max_pfn - 1, arm_dma_pfn_limit);
+
+	/*
+	 * Translate the device's DMA mask to a PFN limit.  This
+	 * PFN number includes the page which we can DMA to.
+	 */
+	return dma_to_pfn(dev, mask) >= max_dma_pfn;
+}
+
 const struct dma_map_ops arm_dma_ops = {
 	.alloc			= arm_dma_alloc,
 	.free			= arm_dma_free,
@@ -219,49 +236,6 @@ const struct dma_map_ops arm_coherent_dma_ops = {
 };
 EXPORT_SYMBOL(arm_coherent_dma_ops);
 
-static int __dma_supported(struct device *dev, u64 mask, bool warn)
-{
-	unsigned long max_dma_pfn = min(max_pfn - 1, arm_dma_pfn_limit);
-
-	/*
-	 * Translate the device's DMA mask to a PFN limit.  This
-	 * PFN number includes the page which we can DMA to.
-	 */
-	if (dma_to_pfn(dev, mask) < max_dma_pfn) {
-		if (warn)
-			dev_warn(dev, "Coherent DMA mask %#llx (pfn %#lx-%#lx) covers a smaller range of system memory than the DMA zone pfn 0x0-%#lx\n",
-				 mask,
-				 dma_to_pfn(dev, 0), dma_to_pfn(dev, mask) + 1,
-				 max_dma_pfn + 1);
-		return 0;
-	}
-
-	return 1;
-}
-
-static u64 get_coherent_dma_mask(struct device *dev)
-{
-	u64 mask = (u64)DMA_BIT_MASK(32);
-
-	if (dev) {
-		mask = dev->coherent_dma_mask;
-
-		/*
-		 * Sanity check the DMA mask - it must be non-zero, and
-		 * must be able to be satisfied by a DMA allocation.
-		 */
-		if (mask == 0) {
-			dev_warn(dev, "coherent DMA mask is unset\n");
-			return 0;
-		}
-
-		if (!__dma_supported(dev, mask, true))
-			return 0;
-	}
-
-	return mask;
-}
-
 static void __dma_clear_buffer(struct page *page, size_t size, int coherent_flag)
 {
 	/*
@@ -688,7 +662,7 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
 			 gfp_t gfp, pgprot_t prot, bool is_coherent,
 			 unsigned long attrs, const void *caller)
 {
-	u64 mask = get_coherent_dma_mask(dev);
+	u64 mask = min_not_zero(dev->coherent_dma_mask, dev->bus_dma_limit);
 	struct page *page = NULL;
 	void *addr;
 	bool allowblock, cma;
@@ -712,9 +686,6 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
 	}
 #endif
 
-	if (!mask)
-		return NULL;
-
 	buf = kzalloc(sizeof(*buf),
 		      gfp & ~(__GFP_DMA | __GFP_DMA32 | __GFP_HIGHMEM));
 	if (!buf)
@@ -1087,17 +1058,6 @@ void arm_dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
 					    dir);
 }
 
-/*
- * Return whether the given device DMA address mask can be supported
- * properly.  For example, if your device can only drive the low 24-bits
- * during bus mastering, then you would pass 0x00ffffff as the mask
- * to this function.
- */
-int arm_dma_supported(struct device *dev, u64 mask)
-{
-	return __dma_supported(dev, mask, false);
-}
-
 static const struct dma_map_ops *arm_get_dma_map_ops(bool coherent)
 {
 	/*
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index b598e69..2dd5c41 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -189,7 +189,7 @@ void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
  */
 static inline bool access_error(unsigned int fsr, struct vm_area_struct *vma)
 {
-	unsigned int mask = VM_READ | VM_WRITE | VM_EXEC;
+	unsigned int mask = VM_ACCESS_FLAGS;
 
 	if ((fsr & FSR_WRITE) && !(fsr & FSR_CM))
 		mask = VM_WRITE;
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 69a337d..ec8d0008 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -1646,3 +1646,17 @@ void __init early_mm_init(const struct machine_desc *mdesc)
 	build_mem_type_table();
 	early_paging_init(mdesc);
 }
+
+void set_pte_at(struct mm_struct *mm, unsigned long addr,
+			      pte_t *ptep, pte_t pteval)
+{
+	unsigned long ext = 0;
+
+	if (addr < TASK_SIZE && pte_valid_user(pteval)) {
+		if (!pte_special(pteval))
+			__sync_icache_dcache(pteval);
+		ext |= PTE_EXT_NG;
+	}
+
+	set_pte_ext(ptep, pteval, ext);
+}
diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c
index cc29869..bf85d6d 100644
--- a/arch/arm/net/bpf_jit_32.c
+++ b/arch/arm/net/bpf_jit_32.c
@@ -929,7 +929,11 @@ static inline void emit_a32_rsh_i64(const s8 dst[],
 	rd = arm_bpf_get_reg64(dst, tmp, ctx);
 
 	/* Do LSR operation */
-	if (val < 32) {
+	if (val == 0) {
+		/* An immediate value of 0 encodes a shift amount of 32
+		 * for LSR. To shift by 0, don't do anything.
+		 */
+	} else if (val < 32) {
 		emit(ARM_MOV_SI(tmp2[1], rd[1], SRTYPE_LSR, val), ctx);
 		emit(ARM_ORR_SI(rd[1], tmp2[1], rd[0], SRTYPE_ASL, 32 - val), ctx);
 		emit(ARM_MOV_SI(rd[0], rd[0], SRTYPE_LSR, val), ctx);
@@ -955,7 +959,11 @@ static inline void emit_a32_arsh_i64(const s8 dst[],
 	rd = arm_bpf_get_reg64(dst, tmp, ctx);
 
 	/* Do ARSH operation */
-	if (val < 32) {
+	if (val == 0) {
+		/* An immediate value of 0 encodes a shift amount of 32
+		 * for ASR. To shift by 0, don't do anything.
+		 */
+	} else if (val < 32) {
 		emit(ARM_MOV_SI(tmp2[1], rd[1], SRTYPE_LSR, val), ctx);
 		emit(ARM_ORR_SI(rd[1], tmp2[1], rd[0], SRTYPE_ASL, 32 - val), ctx);
 		emit(ARM_MOV_SI(rd[0], rd[0], SRTYPE_ASR, val), ctx);
@@ -992,21 +1000,35 @@ static inline void emit_a32_mul_r64(const s8 dst[], const s8 src[],
 	arm_bpf_put_reg32(dst_hi, rd[0], ctx);
 }
 
+static bool is_ldst_imm(s16 off, const u8 size)
+{
+	s16 off_max = 0;
+
+	switch (size) {
+	case BPF_B:
+	case BPF_W:
+		off_max = 0xfff;
+		break;
+	case BPF_H:
+		off_max = 0xff;
+		break;
+	case BPF_DW:
+		/* Need to make sure off+4 does not overflow. */
+		off_max = 0xfff - 4;
+		break;
+	}
+	return -off_max <= off && off <= off_max;
+}
+
 /* *(size *)(dst + off) = src */
 static inline void emit_str_r(const s8 dst, const s8 src[],
-			      s32 off, struct jit_ctx *ctx, const u8 sz){
+			      s16 off, struct jit_ctx *ctx, const u8 sz){
 	const s8 *tmp = bpf2a32[TMP_REG_1];
-	s32 off_max;
 	s8 rd;
 
 	rd = arm_bpf_get_reg32(dst, tmp[1], ctx);
 
-	if (sz == BPF_H)
-		off_max = 0xff;
-	else
-		off_max = 0xfff;
-
-	if (off < 0 || off > off_max) {
+	if (!is_ldst_imm(off, sz)) {
 		emit_a32_mov_i(tmp[0], off, ctx);
 		emit(ARM_ADD_R(tmp[0], tmp[0], rd), ctx);
 		rd = tmp[0];
@@ -1035,18 +1057,12 @@ static inline void emit_str_r(const s8 dst, const s8 src[],
 
 /* dst = *(size*)(src + off) */
 static inline void emit_ldx_r(const s8 dst[], const s8 src,
-			      s32 off, struct jit_ctx *ctx, const u8 sz){
+			      s16 off, struct jit_ctx *ctx, const u8 sz){
 	const s8 *tmp = bpf2a32[TMP_REG_1];
 	const s8 *rd = is_stacked(dst_lo) ? tmp : dst;
 	s8 rm = src;
-	s32 off_max;
 
-	if (sz == BPF_H)
-		off_max = 0xff;
-	else
-		off_max = 0xfff;
-
-	if (off < 0 || off > off_max) {
+	if (!is_ldst_imm(off, sz)) {
 		emit_a32_mov_i(tmp[0], off, ctx);
 		emit(ARM_ADD_R(tmp[0], tmp[0], src), ctx);
 		rm = tmp[0];
diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c
index ffb93db..509d482 100644
--- a/arch/arm/plat-orion/time.c
+++ b/arch/arm/plat-orion/time.c
@@ -177,12 +177,6 @@ static irqreturn_t orion_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction orion_timer_irq = {
-	.name		= "orion_tick",
-	.flags		= IRQF_TIMER,
-	.handler	= orion_timer_interrupt
-};
-
 void __init
 orion_time_set_base(void __iomem *_timer_base)
 {
@@ -236,7 +230,9 @@ orion_time_init(void __iomem *_bridge_base, u32 _bridge_timer1_clr_mask,
 	/*
 	 * Setup clockevent timer (interrupt-driven).
 	 */
-	setup_irq(irq, &orion_timer_irq);
+	if (request_irq(irq, orion_timer_interrupt, IRQF_TIMER, "orion_tick",
+			NULL))
+		pr_err("Failed to request irq %u (orion_tick)\n", irq);
 	orion_clkevt.cpumask = cpumask_of(0);
 	clockevents_config_and_register(&orion_clkevt, tclk, 1, 0xfffffffe);
 }
diff --git a/arch/arm/vdso/.gitignore b/arch/arm/vdso/.gitignore
index 6b47f6e..dfa06f5 100644
--- a/arch/arm/vdso/.gitignore
+++ b/arch/arm/vdso/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 vdso.lds
 vdso.so.raw
 vdsomunge
diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c
index dd6804a..fd4e1ce1 100644
--- a/arch/arm/xen/enlighten.c
+++ b/arch/arm/xen/enlighten.c
@@ -36,7 +36,7 @@
 
 #include <linux/mm.h>
 
-struct start_info _xen_start_info;
+static struct start_info _xen_start_info;
 struct start_info *xen_start_info = &_xen_start_info;
 EXPORT_SYMBOL(xen_start_info);
 
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 6e41c4b..40fb05d 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -1502,7 +1502,10 @@
 	default y
 	depends on !KVM || ARM64_VHE
 	depends on (CC_HAS_SIGN_RETURN_ADDRESS || CC_HAS_BRANCH_PROT_PAC_RET) && AS_HAS_PAC
-	depends on CC_IS_GCC || (CC_IS_CLANG && AS_HAS_CFI_NEGATE_RA_STATE)
+	# GCC 9.1 and later inserts a .note.gnu.property section note for PAC
+	# which is only understood by binutils starting with version 2.33.1.
+	depends on !CC_IS_GCC || GCC_VERSION < 90100 || LD_VERSION >= 233010000
+	depends on !CC_IS_CLANG || AS_HAS_CFI_NEGATE_RA_STATE
 	depends on (!FUNCTION_GRAPH_TRACER || DYNAMIC_FTRACE_WITH_REGS)
 	help
 	  Pointer authentication (part of the ARMv8.3 Extensions) provides
diff --git a/arch/arm64/Kconfig.debug b/arch/arm64/Kconfig.debug
index 1c906d9..a1efa24 100644
--- a/arch/arm64/Kconfig.debug
+++ b/arch/arm64/Kconfig.debug
@@ -52,19 +52,6 @@
 
 	  If in doubt, say "Y".
 
-config DEBUG_ALIGN_RODATA
-	depends on STRICT_KERNEL_RWX
-	bool "Align linker sections up to SECTION_SIZE"
-	help
-	  If this option is enabled, sections that may potentially be marked as
-	  read only or non-executable will be aligned up to the section size of
-	  the kernel. This prevents sections from being split into pages and
-	  avoids a potential TLB penalty. The downside is an increase in
-	  alignment and potentially wasted space. Turn on this option if
-	  performance is more important than memory pressure.
-
-	  If in doubt, say N.
-
 config DEBUG_EFI
 	depends on EFI && DEBUG_INFO
 	bool "UEFI debugging"
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 76778b2..55d70cf 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -39,7 +39,6 @@
 	select ARM_AMBA
 	select ARM_GIC
 	select ARM_TIMER_SP804
-	select HAVE_ARM_ARCH_TIMER
 	help
 	  This enables support for the Broadcom BCM2837 and BCM2711 SoC.
 	  These SoCs are used in the Raspberry Pi 3 and 4 devices.
@@ -301,7 +300,6 @@
 
 config ARCH_ZYNQMP
 	bool "Xilinx ZynqMP Family"
-	select ZYNQMP_FIRMWARE
 	help
 	  This enables support for Xilinx ZynqMP Family
 
diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
index f15f92b..85e4149 100644
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@@ -65,6 +65,10 @@
 					include/generated/asm-offsets.h))
 endif
 
+# Ensure that if the compiler supports branch protection we default it
+# off, this will be overridden if we are using branch protection.
+branch-prot-flags-y += $(call cc-option,-mbranch-protection=none)
+
 ifeq ($(CONFIG_ARM64_PTR_AUTH),y)
 branch-prot-flags-$(CONFIG_CC_HAS_SIGN_RETURN_ADDRESS) := -msign-return-address=all
 branch-prot-flags-$(CONFIG_CC_HAS_BRANCH_PROT_PAC_RET) := -mbranch-protection=pac-ret+leaf
@@ -73,9 +77,10 @@
 # we pass it only to the assembler. This option is utilized only in case of non
 # integrated assemblers.
 branch-prot-flags-$(CONFIG_AS_HAS_PAC) += -Wa,-march=armv8.3-a
-KBUILD_CFLAGS += $(branch-prot-flags-y)
 endif
 
+KBUILD_CFLAGS += $(branch-prot-flags-y)
+
 ifeq ($(CONFIG_CPU_BIG_ENDIAN), y)
 KBUILD_CPPFLAGS	+= -mbig-endian
 CHECKFLAGS	+= -D__AARCH64EB__
diff --git a/arch/arm64/boot/.gitignore b/arch/arm64/boot/.gitignore
index 8dab0bb..9a7a9009 100644
--- a/arch/arm64/boot/.gitignore
+++ b/arch/arm64/boot/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 Image
 Image.gz
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index cf4f786..e4d3cd0 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -9,6 +9,9 @@
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-lts.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinebook.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinephone-1.0.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinephone-1.1.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinetab.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
index 6dfafa1..5fa9ca0 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
@@ -158,6 +158,17 @@ &r_pio {
 	 */
 };
 
+&pio {
+	vcc-pa-supply = <&reg_dcdc1>;
+	vcc-pb-supply = <&reg_dcdc1>;
+	vcc-pc-supply = <&reg_dcdc1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_aldo1>;
+	vcc-pf-supply = <&reg_dcdc1>;
+	vcc-pg-supply = <&reg_dldo4>;
+	vcc-ph-supply = <&reg_dcdc1>;
+};
+
 &r_rsb {
 	status = "okay";
 
@@ -170,6 +181,12 @@ axp803: pmic@3a3 {
 	};
 };
 
+/* VCC-PL is powered by aldo2 but we cannot add it as the RSB */
+/* interface used to talk to the PMIC in on the PL pins */
+/* &r_pio { */
+/*	vcc-pl-supply = <&reg_aldo2>; */
+/* }; */
+
 #include "axp803.dtsi"
 
 &ac_power_supply {
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
index 3d894b2..64b1c54 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
@@ -21,32 +21,17 @@ aliases {
 		ethernet0 = &rtl8723cs;
 	};
 
-	vdd_bl: regulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "bl-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
-		enable-active-high;
-	};
-
 	backlight: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&pwm 0 50000 0>;
 		brightness-levels = <0 5 10 15 20 30 40 55 70 85 100>;
 		default-brightness-level = <2>;
 		enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
-		power-supply = <&vdd_bl>;
+		power-supply = <&reg_vbklt>;
 	};
 
 	chosen {
 		stdout-path = "serial0:115200n8";
-
-		framebuffer-lcd {
-			panel-supply = <&reg_dc1sw>;
-			dvdd25-supply = <&reg_dldo2>;
-			dvdd12-supply = <&reg_fldo1>;
-		};
 	};
 
 	gpio_keys {
@@ -63,11 +48,34 @@ lid_switch {
 		};
 	};
 
-	reg_vcc3v3: vcc3v3 {
+	panel_edp: panel-edp {
+		compatible = "neweast,wjfh116008a";
+		backlight = <&backlight>;
+		power-supply = <&reg_dc1sw>;
+
+		port {
+			panel_edp_in: endpoint {
+				remote-endpoint = <&anx6345_out_edp>;
+			};
+		};
+	};
+
+	reg_vbklt: vbklt {
 		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
+		regulator-name = "vbklt";
+		regulator-min-microvolt = <18000000>;
+		regulator-max-microvolt = <18000000>;
+		gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+		enable-active-high;
+	};
+
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&axp_gpio 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 	};
 
 	wifi_pwrseq: wifi_pwrseq {
@@ -77,12 +85,7 @@ wifi_pwrseq: wifi_pwrseq {
 
 	speaker_amp: audio-amplifier {
 		compatible = "simple-audio-amplifier";
-		/*
-		 * TODO This is actually a fixed regulator controlled by
-		 * the GPIO line on the PMIC. This should be corrected
-		 * once GPIO support is added for this PMIC.
-		 */
-		VCC-supply = <&reg_ldo_io0>;
+		VCC-supply = <&reg_vcc5v0>;
 		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
 		sound-name-prefix = "Speaker Amp";
 	};
@@ -118,6 +121,10 @@ &dai {
 	status = "okay";
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	phys = <&usbphy 0>;
 	phy-names = "usb";
@@ -128,11 +135,15 @@ &ehci1 {
 	status = "okay";
 };
 
+&mixer0 {
+	status = "okay";
+};
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_dcdc1>;
-	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
 	disable-wp;
 	bus-width = <4>;
 	status = "okay";
@@ -175,10 +186,61 @@ &ohci1 {
 	status = "okay";
 };
 
+&pio {
+	vcc-pc-supply = <&reg_eldo1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_aldo1>;
+	vcc-pg-supply = <&reg_eldo1>;
+};
+
 &pwm {
 	status = "okay";
 };
 
+&r_i2c {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_i2c_pl89_pins>;
+	status = "okay";
+
+	anx6345: anx6345@38 {
+		compatible = "analogix,anx6345";
+		reg = <0x38>;
+		reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
+		dvdd25-supply = <&reg_dldo2>;
+		dvdd12-supply = <&reg_fldo1>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			anx6345_in: port@0 {
+				reg = <0>;
+				anx6345_in_tcon0: endpoint {
+					remote-endpoint = <&tcon0_out_anx6345>;
+				};
+			};
+
+			anx6345_out: port@1 {
+				reg = <1>;
+				anx6345_out_edp: endpoint {
+					remote-endpoint = <&panel_edp_in>;
+				};
+			};
+		};
+	};
+};
+
+&r_pio {
+	/*
+	 * FIXME: We can't add that supply for now since it would
+	 * create a circular dependency between pinctrl, the regulator
+	 * and the RSB Bus.
+	 *
+	 * vcc-pl-supply = <&reg_aldo2>;
+	 */
+};
+
 &r_rsb {
 	status = "okay";
 
@@ -190,14 +252,6 @@ axp803: pmic@3a3 {
 	};
 };
 
-/* The ANX6345 eDP-bridge is on r_i2c */
-&r_i2c {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&r_i2c_pl89_pins>;
-	status = "okay";
-};
-
 #include "axp803.dtsi"
 
 &ac_power_supply {
@@ -209,9 +263,7 @@ &battery_power_supply {
 };
 
 &reg_aldo1 {
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <2800000>;
-	regulator-name = "vcc-csi";
+	regulator-name = "vcc-pe";
 };
 
 &reg_aldo2 {
@@ -274,12 +326,6 @@ &reg_dldo2 {
 	regulator-name = "vcc-edp";
 };
 
-&reg_dldo3 {
-	regulator-min-microvolt = <3300000>;
-	regulator-max-microvolt = <3300000>;
-	regulator-name = "avdd-csi";
-};
-
 &reg_dldo4 {
 	regulator-min-microvolt = <3300000>;
 	regulator-max-microvolt = <3300000>;
@@ -293,12 +339,6 @@ &reg_eldo1 {
 	regulator-name = "cpvdd";
 };
 
-&reg_eldo3 {
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-	regulator-name = "vdd-1v8-csi";
-};
-
 &reg_fldo1 {
 	regulator-min-microvolt = <1200000>;
 	regulator-max-microvolt = <1200000>;
@@ -312,17 +352,16 @@ &reg_fldo2 {
 	regulator-name = "vdd-cpus";
 };
 
-&reg_ldo_io0 {
-	regulator-min-microvolt = <3300000>;
-	regulator-max-microvolt = <3300000>;
-	regulator-name = "vcc-usb";
-	status = "okay";
-};
-
 &reg_rtc_ldo {
 	regulator-name = "vcc-rtc";
 };
 
+&simplefb_lcd {
+	panel-supply = <&reg_dc1sw>;
+	dvdd25-supply = <&reg_dldo2>;
+	dvdd12-supply = <&reg_fldo1>;
+};
+
 &simplefb_hdmi {
 	vcc-hdmi-supply = <&reg_dldo1>;
 };
@@ -350,6 +389,19 @@ &sound {
 			"MIC2", "Internal Microphone Right";
 };
 
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_rgb666_pins>;
+
+	status = "okay";
+};
+
+&tcon0_out {
+	tcon0_out_anx6345: endpoint {
+		remote-endpoint = <&anx6345_in_tcon0>;
+	};
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pb_pins>;
@@ -361,7 +413,7 @@ &usb_otg {
 };
 
 &usbphy {
-	usb0_vbus-supply = <&reg_ldo_io0>;
-	usb1_vbus-supply = <&reg_ldo_io0>;
+	usb0_vbus-supply = <&reg_vcc5v0>;
+	usb1_vbus-supply = <&reg_vcc5v0>;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts
new file mode 100644
index 0000000..0c42272
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Ondrej Jirman <megous@megous.com>
+
+/dts-v1/;
+
+#include "sun50i-a64-pinephone.dtsi"
+
+/ {
+	model = "Pine64 PinePhone Developer Batch (1.0)";
+	compatible = "pine64,pinephone-1.0", "allwinner,sun50i-a64";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
new file mode 100644
index 0000000..06a775c
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Ondrej Jirman <megous@megous.com>
+
+/dts-v1/;
+
+#include "sun50i-a64-pinephone.dtsi"
+
+/ {
+	model = "Pine64 PinePhone Braveheart (1.1)";
+	compatible = "pine64,pinephone-1.1", "allwinner,sun50i-a64";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
new file mode 100644
index 0000000..cefda14
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
@@ -0,0 +1,379 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.xyz>
+// Copyright (C) 2020 Martijn Braam <martijn@brixit.nl>
+// Copyright (C) 2020 Ondrej Jirman <megous@megous.com>
+
+#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		blue {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */
+		};
+
+		green {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 3 18 GPIO_ACTIVE_HIGH>; /* PD18 */
+		};
+
+		red {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&pio 3 19 GPIO_ACTIVE_HIGH>; /* PD19 */
+		};
+	};
+
+	speaker_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&pio 2 7 GPIO_ACTIVE_HIGH>; /* PC7 */
+		sound-name-prefix = "Speaker Amp";
+	};
+
+	vibrator {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */
+		vcc-supply = <&reg_dcdc1>;
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&codec_analog {
+	cpvdd-supply = <&reg_eldo1>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&dai {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* Magnetometer */
+	lis3mdl@1e {
+		compatible = "st,lis3mdl-magn";
+		reg = <0x1e>;
+		vdd-supply = <&reg_dldo1>;
+		vddio-supply = <&reg_dldo1>;
+	};
+
+	/* Accelerometer/gyroscope */
+	mpu6050@68 {
+		compatible = "invensense,mpu6050";
+		reg = <0x68>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 5 IRQ_TYPE_EDGE_RISING>; /* PH5 */
+		vdd-supply = <&reg_dldo1>;
+		vddio-supply = <&reg_dldo1>;
+	};
+};
+
+/* Connected to pogo pins (external spring based pinheader for user addons) */
+&i2c2 {
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button-200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_dcdc1>;
+	vcc-pc-supply = <&reg_dcdc1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_aldo1>;
+	vcc-pf-supply = <&reg_dcdc1>;
+	vcc-pg-supply = <&reg_dldo4>;
+	vcc-ph-supply = <&reg_dcdc1>;
+};
+
+&r_pio {
+	/*
+	 * FIXME: We can't add that supply for now since it would
+	 * create a circular dependency between pinctrl, the regulator
+	 * and the RSB Bus.
+	 *
+	 * vcc-pl-supply = <&reg_aldo2>;
+	 */
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp803.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dovdd-csi";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-dsi-sensor";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-mipi-io";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "avdd-csi";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+&reg_eldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-lpddr";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dvdd-1v8-csi";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_ldo_io0 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-lcd-ctp-stk";
+	status = "okay";
+};
+
+&reg_ldo_io1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-1v8-typec";
+	status = "okay";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&sound {
+	status = "okay";
+	simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
+	simple-audio-card,widgets = "Microphone", "Headset Microphone",
+				    "Microphone", "Internal Microphone",
+				    "Headphone", "Headphone Jack",
+				    "Speaker", "Internal Earpiece",
+				    "Speaker", "Internal Speaker";
+	simple-audio-card,routing =
+			"Headphone Jack", "HP",
+			"Internal Earpiece", "EARPIECE",
+			"Internal Speaker", "Speaker Amp OUTL",
+			"Internal Speaker", "Speaker Amp OUTR",
+			"Speaker Amp INL", "LINEOUT",
+			"Speaker Amp INR", "LINEOUT",
+			"Left DAC", "AIF1 Slot 0 Left",
+			"Right DAC", "AIF1 Slot 0 Right",
+			"AIF1 Slot 0 Left ADC", "Left ADC",
+			"AIF1 Slot 0 Right ADC", "Right ADC",
+			"Internal Microphone", "MBIAS",
+			"MIC1", "Internal Microphone",
+			"Headset Microphone", "HBIAS",
+			"MIC2", "Headset Microphone";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+/* Connected to the modem (hardware flow control can't be used) */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts
new file mode 100644
index 0000000..316e8a4
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts
@@ -0,0 +1,460 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ */
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "PineTab";
+	compatible = "pine64,pinetab", "allwinner,sun50i-a64";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &rtl8723cs;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 16 18 20 22 24 26 29 32 35 38 42 46 51 56 62 68 75 83 91 100>;
+		default-brightness-level = <15>;
+		enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
+		power-supply = <&vdd_bl>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	i2c-csi {
+		compatible = "i2c-gpio";
+		sda-gpios = <&pio 4 13 GPIO_ACTIVE_HIGH>; /* PE13 */
+		scl-gpios = <&pio 4 12 GPIO_ACTIVE_HIGH>; /* PE12 */
+		i2c-gpio,delay-us = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Rear camera */
+		ov5640: camera@3c {
+			compatible = "ovti,ov5640";
+			reg = <0x3c>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&csi_mclk_pin>;
+			clocks = <&ccu CLK_CSI_MCLK>;
+			clock-names = "xclk";
+
+			AVDD-supply = <&reg_dldo3>;
+			DOVDD-supply = <&reg_aldo1>;
+			DVDD-supply = <&reg_eldo3>;
+			reset-gpios = <&pio 4 14 GPIO_ACTIVE_LOW>; /* PE14 */
+			powerdown-gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>; /* PE15 */
+
+			port {
+				ov5640_ep: endpoint {
+					remote-endpoint = <&csi_ep>;
+					bus-width = <8>;
+					hsync-active = <1>; /* Active high */
+					vsync-active = <0>; /* Active low */
+					data-active = <1>;  /* Active high */
+					pclk-sample = <1>;  /* Rising */
+				};
+			};
+		};
+	};
+
+	speaker_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+		sound-name-prefix = "Speaker Amp";
+	};
+
+	vdd_bl: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "bl-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+		enable-active-high;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&codec_analog {
+	hpvcc-supply = <&reg_eldo1>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&csi {
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi_ep: endpoint {
+			remote-endpoint = <&ov5640_ep>;
+			bus-width = <8>;
+			hsync-active = <1>; /* Active high */
+			vsync-active = <0>; /* Active low */
+			data-active = <1>;  /* Active high */
+			pclk-sample = <1>;  /* Rising */
+		};
+	};
+};
+
+&dai {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&dphy {
+	status = "okay";
+};
+
+&dsi {
+	vcc-dsi-supply = <&reg_dldo1>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "feixin,k101-im2ba02";
+		reg = <0>;
+		avdd-supply = <&reg_dc1sw>;
+		dvdd-supply = <&reg_dc1sw>;
+		cvdd-supply = <&reg_ldo_io1>;
+		reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
+		backlight = <&backlight>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	touchscreen@5d {
+		compatible = "goodix,gt9271";
+		reg = <0x5d>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 4 IRQ_TYPE_LEVEL_HIGH>; /* PH4 */
+		irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+		reset-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
+		AVDD28-supply = <&reg_ldo_io1>;
+	};
+};
+
+&i2c0_pins {
+	bias-pull-up;
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* TODO: add Bochs BMA223 accelerometer here */
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button-200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
+&mixer1 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dldo4>;
+	vqmmc-supply = <&reg_eldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8723cs: wifi@1 {
+		reg = <1>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pwm {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp803.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "dovdd-csi";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-hdmi-dsi-sensor";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "avdd-csi";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_eldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "cpvdd";
+};
+
+&reg_eldo2 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcca-1v8";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dvdd-1v8-csi";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_ldo_io0 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-usb";
+	status = "okay";
+};
+
+&reg_ldo_io1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-enable-ramp-delay = <3500000>;
+	regulator-name = "vcc-touchscreen";
+	status = "okay";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&sound {
+	status = "okay";
+	simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
+	simple-audio-card,widgets = "Microphone", "Internal Microphone Left",
+				    "Microphone", "Internal Microphone Right",
+				    "Headphone", "Headphone Jack",
+				    "Speaker", "Internal Speaker";
+	simple-audio-card,routing =
+			"Left DAC", "AIF1 Slot 0 Left",
+			"Right DAC", "AIF1 Slot 0 Right",
+			"Speaker Amp INL", "LINEOUT",
+			"Speaker Amp INR", "LINEOUT",
+			"Internal Speaker", "Speaker Amp OUTL",
+			"Internal Speaker", "Speaker Amp OUTR",
+			"Headphone Jack", "HP",
+			"AIF1 Slot 0 Left ADC", "Left ADC",
+			"AIF1 Slot 0 Right ADC", "Right ADC",
+			"Internal Microphone Left", "MBIAS",
+			"MIC1", "Internal Microphone Left",
+			"Internal Microphone Right", "HBIAS",
+			"MIC2", "Internal Microphone Right";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_ldo_io0>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 862b47d..31143fe 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -264,7 +264,7 @@ bus@1000000 {
 
 			display_clocks: clock@0 {
 				compatible = "allwinner,sun50i-a64-de2-clk";
-				reg = <0x0 0x100000>;
+				reg = <0x0 0x10000>;
 				clocks = <&ccu CLK_BUS_DE>,
 					 <&ccu CLK_DE>;
 				clock-names = "bus",
@@ -274,6 +274,18 @@ display_clocks: clock@0 {
 				#reset-cells = <1>;
 			};
 
+			rotate: rotate@20000 {
+				compatible = "allwinner,sun50i-a64-de2-rotate",
+					     "allwinner,sun8i-a83t-de2-rotate";
+				reg = <0x20000 0x10000>;
+				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&display_clocks CLK_BUS_ROT>,
+					 <&display_clocks CLK_ROT>;
+				clock-names = "bus",
+					      "mod";
+				resets = <&display_clocks RST_ROT>;
+			};
+
 			mixer0: mixer@100000 {
 				compatible = "allwinner,sun50i-a64-de2-mixer-0";
 				reg = <0x100000 0x100000>;
@@ -671,6 +683,11 @@ i2c1_pins: i2c1-pins {
 				function = "i2c1";
 			};
 
+			i2c2_pins: i2c2-pins {
+				pins = "PE14", "PE15";
+				function = "i2c2";
+			};
+
 			/omit-if-no-ref/
 			lcd_rgb666_pins: lcd-rgb666-pins {
 				pins = "PD0", "PD1", "PD2", "PD3", "PD4",
@@ -958,12 +975,13 @@ i2c2: i2c@1c2b400 {
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_I2C2>;
 			resets = <&ccu RST_BUS_I2C2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
 
-
 		spi0: spi@1c68000 {
 			compatible = "allwinner,sun8i-h3-spi";
 			reg = <0x01c68000 0x1000>;
@@ -1061,6 +1079,14 @@ pwm: pwm@1c21400 {
 			status = "disabled";
 		};
 
+		mbus: dram-controller@1c62000 {
+			compatible = "allwinner,sun50i-a64-mbus";
+			reg = <0x01c62000 0x1000>;
+			clocks = <&ccu 112>;
+			dma-ranges = <0x00000000 0x40000000 0xc0000000>;
+			#interconnect-cells = <1>;
+		};
+
 		csi: csi@1cb0000 {
 			compatible = "allwinner,sun50i-a64-csi";
 			reg = <0x01cb0000 0x1000>;
@@ -1106,6 +1132,20 @@ dphy: d-phy@1ca1000 {
 			#phy-cells = <0>;
 		};
 
+		deinterlace: deinterlace@1e00000 {
+			compatible = "allwinner,sun50i-a64-deinterlace",
+				     "allwinner,sun8i-h3-deinterlace";
+			reg = <0x01e00000 0x20000>;
+			clocks = <&ccu CLK_BUS_DEINTERLACE>,
+				 <&ccu CLK_DEINTERLACE>,
+				 <&ccu CLK_DRAM_DEINTERLACE>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_DEINTERLACE>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			interconnects = <&mbus 9>;
+			interconnect-names = "dma-mem";
+		};
+
 		hdmi: hdmi@1ee0000 {
 			compatible = "allwinner,sun50i-a64-dw-hdmi",
 				     "allwinner,sun8i-a83t-dw-hdmi";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
index 70b5f099..7d7aad1 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
@@ -61,6 +61,7 @@ sw4 {
 			label = "sw4";
 			linux,code = <BTN_0>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 	};
 
@@ -93,6 +94,10 @@ &codec {
 	status = "okay";
 };
 
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
 &de {
 	status = "okay";
 };
@@ -168,6 +173,22 @@ &ohci3 {
 	status = "okay";
 };
 
+&r_i2c {
+	status = "okay";
+
+	reg_vdd_cpux: regulator@65 {
+		compatible = "silergy,sy8106a";
+		reg = <0x65>;
+		regulator-name = "vdd-cpux";
+		silergy,fixed-microvolt = <1100000>;
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-ramp-delay = <200>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
 &spi0  {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
index 9893aa6..4462a68 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
@@ -38,8 +38,7 @@ cpu3: cpu@3 {
 	};
 
 	pmu {
-		compatible = "arm,cortex-a53-pmu",
-			     "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
index df6d872..8f09d20 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
@@ -32,6 +32,13 @@ hdmi_con_in: endpoint {
 		};
 	};
 
+	ext_osc32k: ext_osc32k_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "ext_osc32k";
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -275,6 +282,10 @@ &r_pio {
 	vcc-pm-supply = <&reg_aldo1>;
 };
 
+&rtc {
+	clocks = <&ext_osc32k>;
+};
+
 &spdif {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
index c311eee..47f5796 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
@@ -32,6 +32,13 @@ hdmi_con_in: endpoint {
 		};
 	};
 
+	ext_osc32k: ext_osc32k_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "ext_osc32k";
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -144,6 +151,15 @@ brcm: sdio-wifi@1 {
 	};
 };
 
+&mmc2 {
+	vmmc-supply = <&reg_cldo1>;
+	vqmmc-supply = <&reg_bldo2>;
+	cap-mmc-hw-reset;
+	non-removable;
+	bus-width = <8>;
+	status = "okay";
+};
+
 &ohci0 {
 	status = "okay";
 };
@@ -276,6 +292,10 @@ &r_ir {
 	status = "okay";
 };
 
+&rtc {
+	clocks = <&ext_osc32k>;
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_ph_pins>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
index 83aab73..fceb298 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
@@ -7,4 +7,37 @@
 / {
 	model = "OrangePi One Plus";
 	compatible = "xunlong,orangepi-one-plus", "allwinner,sun50i-h6";
+
+	aliases {
+		ethernet0 = &emac;
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
+		vin-supply = <&reg_aldo2>;
+	};
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ext_rgmii_pins>;
+	phy-mode = "rgmii";
+	phy-handle = <&ext_rgmii_phy>;
+	phy-supply = <&reg_gmac_3v3>;
+	allwinner,rx-delay-ps = <200>;
+	allwinner,tx-delay-ps = <200>;
+	status = "okay";
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
index 37f4c57..9287976 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
@@ -20,6 +20,25 @@ chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+		ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	ext_osc32k: ext_osc32k_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "ext_osc32k";
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -45,6 +64,10 @@ reg_vcc5v: vcc5v {
 	};
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -58,6 +81,16 @@ &gpu {
 	status = "okay";
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_cldo1>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
@@ -197,6 +230,10 @@ &r_ir {
 	status = "okay";
 };
 
+&rtc {
+	clocks = <&ext_osc32k>;
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_ph_pins>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
index d1c2aa5..b0642d8 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
@@ -14,12 +14,20 @@ / {
 	aliases {
 		ethernet0 = &emac;
 		serial0 = &uart0;
+		spi0 = &spi0;
 	};
 
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
+	ext_osc32k: ext_osc32k_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "ext_osc32k";
+	};
+
 	hdmi_connector: connector {
 		compatible = "hdmi-connector";
 		type = "a";
@@ -278,6 +286,28 @@ &r_pio {
 	vcc-pm-supply = <&reg_aldo1>;
 };
 
+&rtc {
+	clocks = <&ext_osc32k>;
+};
+
+/*
+ * The CS pin is shared with the MMC2 CMD pin, so we cannot have the SPI
+ * flash and eMMC at the same time, as one of them would fail probing.
+ * Disable SPI0 in here, to prefer the more useful eMMC. U-Boot can
+ * fix this up in no eMMC is connected.
+ */
+&spi0 {
+	pinctrl-0 = <&spi0_pins>, <&spi0_cs_pin>;
+	pinctrl-names = "default";
+	status = "disabled";
+
+	flash@0 {
+		compatible = "winbond,w25q128", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <4000000>;
+	};
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_ph_pins>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index 3329283..b9ab7d8 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -62,16 +62,8 @@ osc24M: osc24M_clk {
 		clock-output-names = "osc24M";
 	};
 
-	ext_osc32k: ext_osc32k_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-		clock-output-names = "ext_osc32k";
-	};
-
 	pmu {
-		compatible = "arm,cortex-a53-pmu",
-			     "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
@@ -338,6 +330,31 @@ mmc2_pins: mmc2-pins {
 				bias-pull-up;
 			};
 
+			/omit-if-no-ref/
+			spi0_pins: spi0-pins {
+				pins = "PC0", "PC2", "PC3";
+				function = "spi0";
+			};
+
+			/* pin shared with MMC2-CMD (eMMC) */
+			/omit-if-no-ref/
+			spi0_cs_pin: spi0-cs-pin {
+				pins = "PC5";
+				function = "spi0";
+			};
+
+			/omit-if-no-ref/
+			spi1_pins: spi1-pins {
+				pins = "PH4", "PH5", "PH6";
+				function = "spi1";
+			};
+
+			/omit-if-no-ref/
+			spi1_cs_pin: spi1-cs-pin {
+				pins = "PH3";
+				function = "spi1";
+			};
+
 			spdif_tx_pin: spdif-tx-pin {
 				pins = "PH7";
 				function = "spdif";
@@ -504,6 +521,36 @@ i2c2: i2c@5002800 {
 			#size-cells = <0>;
 		};
 
+		spi0: spi@5010000 {
+			compatible = "allwinner,sun50i-h6-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x05010000 0x1000>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 22>, <&dma 22>;
+			dma-names = "rx", "tx";
+			resets = <&ccu RST_BUS_SPI0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@5011000 {
+			compatible = "allwinner,sun50i-h6-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x05011000 0x1000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 23>, <&dma 23>;
+			dma-names = "rx", "tx";
+			resets = <&ccu RST_BUS_SPI1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		emac: ethernet@5020000 {
 			compatible = "allwinner,sun50i-h6-emac",
 				     "allwinner,sun50i-a64-emac";
@@ -800,7 +847,6 @@ rtc: rtc@7000000 {
 			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
 			clock-output-names = "osc32k", "osc32k-out", "iosc";
-			clocks = <&ext_osc32k>;
 			#clock-cells = <1>;
 		};
 
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
index fb11ef0..f6c4a15 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
@@ -178,12 +178,12 @@ partitions {
 
 			qspi_boot: partition@0 {
 				label = "Boot and fpga data";
-				reg = <0x0 0x034B0000>;
+				reg = <0x0 0x03FE0000>;
 			};
 
-			qspi_rootfs: partition@4000000 {
+			qspi_rootfs: partition@3FE0000 {
 				label = "Root Filesystem - JFFS2";
-				reg = <0x034B0000 0x0EB50000>;
+				reg = <0x03FE0000 0x0C020000>;
 			};
 		};
 	};
diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
index 4dec518..755b4ad 100644
--- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
@@ -60,6 +60,12 @@ linux,cma {
 
 	sm: secure-monitor {
 		compatible = "amlogic,meson-gxbb-sm";
+
+		pwrc: power-controller {
+			compatible = "amlogic,meson-a1-pwrc";
+			#power-domain-cells = <1>;
+			status = "okay";
+		};
 	};
 
 	soc {
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
index 4cd2d59..cb1360a 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
@@ -313,15 +313,15 @@ dai-link-6 {
 			dai-tdm-slot-rx-mask-1 = <1 1>;
 			mclk-fs = <256>;
 
-			codec@0 {
+			codec-0 {
 				sound-dai = <&lineout>;
 			};
 
-			codec@1 {
+			codec-1 {
 				sound-dai = <&speaker_amp1>;
 			};
 
-			codec@2 {
+			codec-2 {
 				sound-dai = <&linein>;
 			};
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index abe04f4..0882ea2 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -295,17 +295,9 @@ mux {
 						};
 					};
 
-					emmc_pins: emmc {
+					emmc_ctrl_pins: emmc-ctrl {
 						mux-0 {
-							groups = "emmc_nand_d0",
-								 "emmc_nand_d1",
-								 "emmc_nand_d2",
-								 "emmc_nand_d3",
-								 "emmc_nand_d4",
-								 "emmc_nand_d5",
-								 "emmc_nand_d6",
-								 "emmc_nand_d7",
-								 "emmc_cmd";
+							groups = "emmc_cmd";
 							function = "emmc";
 							bias-pull-up;
 							drive-strength-microamp = <4000>;
@@ -319,6 +311,34 @@ mux-1 {
 						};
 					};
 
+					emmc_data_4b_pins: emmc-data-4b {
+						mux-0 {
+							groups = "emmc_nand_d0",
+								 "emmc_nand_d1",
+								 "emmc_nand_d2",
+								 "emmc_nand_d3";
+							function = "emmc";
+							bias-pull-up;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					emmc_data_8b_pins: emmc-data-8b {
+						mux-0 {
+							groups = "emmc_nand_d0",
+								 "emmc_nand_d1",
+								 "emmc_nand_d2",
+								 "emmc_nand_d3",
+								 "emmc_nand_d4",
+								 "emmc_nand_d5",
+								 "emmc_nand_d6",
+								 "emmc_nand_d7";
+							function = "emmc";
+							bias-pull-up;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
 					emmc_ds_pins: emmc-ds {
 						mux {
 							groups = "emmc_nand_ds";
@@ -573,6 +593,17 @@ mux {
 						};
 					};
 
+					nor_pins: nor {
+						mux {
+							groups = "nor_d",
+							       "nor_q",
+							       "nor_c",
+							       "nor_cs";
+							function = "nor";
+							bias-disable;
+						};
+					};
+
 					pdm_din0_a_pins: pdm-din0-a {
 						mux {
 							groups = "pdm_din0_a";
@@ -957,6 +988,57 @@ mux {
 						};
 					};
 
+					spicc0_x_pins: spicc0-x {
+						mux {
+							groups = "spi0_mosi_x",
+							       "spi0_miso_x",
+							       "spi0_clk_x";
+							function = "spi0";
+							drive-strength-microamp = <4000>;
+							bias-disable;
+						};
+					};
+
+					spicc0_ss0_x_pins: spicc0-ss0-x {
+						mux {
+							groups = "spi0_ss0_x";
+							function = "spi0";
+							drive-strength-microamp = <4000>;
+							bias-disable;
+						};
+					};
+
+					spicc0_c_pins: spicc0-c {
+						mux {
+							groups = "spi0_mosi_c",
+							       "spi0_miso_c",
+							       "spi0_ss0_c",
+							       "spi0_clk_c";
+							function = "spi0";
+							drive-strength-microamp = <4000>;
+							bias-disable;
+						};
+					};
+
+					spicc1_pins: spicc1 {
+						mux {
+							groups = "spi1_mosi",
+							       "spi1_miso",
+							       "spi1_clk";
+							function = "spi1";
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					spicc1_ss0_pins: spicc1-ss0 {
+						mux {
+							groups = "spi1_ss0";
+							function = "spi1";
+							drive-strength-microamp = <4000>;
+							bias-disable;
+						};
+					};
+
 					tdm_a_din0_pins: tdm-a-din0 {
 						mux {
 							groups = "tdm_a_din0";
@@ -2051,6 +2133,39 @@ gpio_intc: interrupt-controller@f080 {
 				amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
 			};
 
+			spicc0: spi@13000 {
+				compatible = "amlogic,meson-g12a-spicc";
+				reg = <0x0 0x13000 0x0 0x44>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc CLKID_SPICC0>,
+					 <&clkc CLKID_SPICC0_SCLK>;
+				clock-names = "core", "pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spicc1: spi@15000 {
+				compatible = "amlogic,meson-g12a-spicc";
+				reg = <0x0 0x15000 0x0 0x44>;
+				interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc CLKID_SPICC1>,
+					 <&clkc CLKID_SPICC1_SCLK>;
+				clock-names = "core", "pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spifc: spi@14000 {
+				compatible = "amlogic,meson-gxbb-spifc";
+				status = "disabled";
+				reg = <0x0 0x14000 0x0 0x80>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc CLKID_CLK81>;
+			};
+
 			pwm_ef: pwm@19000 {
 				compatible = "amlogic,meson-g12a-ee-pwm";
 				reg = <0x0 0x19000 0x0 0x20>;
@@ -2220,6 +2335,7 @@ dwc3: usb@ff500000 {
 				dr_mode = "host";
 				snps,dis_u2_susphy_quirk;
 				snps,quirk-frame-length-adjustment;
+				snps,parkmode-disable-ss-quirk;
 			};
 		};
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
index 03054c4..783e5a3 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
@@ -1,3 +1,4 @@
+
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2019 BayLibre, SAS
@@ -56,6 +57,7 @@ pdm: audio-controller@40000 {
 			 <&clkc_audio AUD_CLKID_PDM_DCLK>,
 			 <&clkc_audio AUD_CLKID_PDM_SYSCLK>;
 		clock-names = "pclk", "dclk", "sysclk";
+		resets = <&clkc_audio AUD_RESET_PDM>;
 		status = "disabled";
 	};
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
index 2ac9e3a..b00d046 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
@@ -269,7 +269,7 @@ dai-link-7 {
 			dai-tdm-slot-tx-mask-3 = <1 1>;
 			mclk-fs = <256>;
 
-			codec@0 {
+			codec {
 				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
 			};
 		};
@@ -472,7 +472,7 @@ &sd_emmc_b {
 /* eMMC */
 &sd_emmc_c {
 	status = "okay";
-	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
 	pinctrl-1 = <&emmc_clk_gate_pins>;
 	pinctrl-names = "default", "clk-gate";
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
index 2a324f0..a26bfe7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
@@ -271,7 +271,7 @@ &sd_emmc_b {
 /* eMMC */
 &sd_emmc_c {
 	status = "okay";
-	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
 	pinctrl-1 = <&emmc_clk_gate_pins>;
 	pinctrl-names = "default", "clk-gate";
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
index 4f2596d..1b07c8c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
@@ -443,7 +443,7 @@ &sd_emmc_b {
 /* eMMC */
 &sd_emmc_c {
 	status = "okay";
-	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
 	pinctrl-1 = <&emmc_clk_gate_pins>;
 	pinctrl-names = "default", "clk-gate";
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
index 5548634..c33e85f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
@@ -8,6 +8,8 @@
 #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
 
 / {
+	model = "Khadas VIM3";
+
 	vddcpu_a: regulator-vddcpu-a {
 		/*
 		 * MP8756GD Regulator.
@@ -48,7 +50,7 @@ vddcpu_b: regulator-vddcpu-b {
 
 	sound {
 		compatible = "amlogic,axg-sound-card";
-		model = "G12A-KHADAS-VIM3";
+		model = "G12B-KHADAS-VIM3";
 		audio-aux-devs = <&tdmout_b>;
 		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
 				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
index 0e54c1d..169ea28 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
@@ -208,7 +208,7 @@ hdmi_connector_in: endpoint {
 
 	sound {
 		compatible = "amlogic,axg-sound-card";
-		model = "G12A-ODROIDN2";
+		model = "G12B-ODROID-N2";
 		audio-aux-devs = <&tdmout_b>;
 		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
 				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
@@ -435,7 +435,7 @@ &sd_emmc_b {
 /* eMMC */
 &sd_emmc_c {
 	status = "okay";
-	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
 	pinctrl-1 = <&emmc_clk_gate_pins>;
 	pinctrl-names = "default", "clk-gate";
 
@@ -451,6 +451,27 @@ &sd_emmc_c {
 	vqmmc-supply = <&flash_1v8>;
 };
 
+/*
+ * EMMC_D4, EMMC_D5, EMMC_D6 and EMMC_D7 pins are shared between SPI NOR pins
+ * and eMMC Data 4 to 7 pins.
+ * Replace emmc_data_8b_pins to emmc_data_4b_pins from sd_emmc_c pinctrl-0,
+ * and change bus-width to 4 then spifc can be enabled.
+ * The SW1 slide should also be set to the correct position.
+ */
+&spifc {
+	status = "disabled";
+	pinctrl-0 = <&nor_pins>;
+	pinctrl-names = "default";
+
+	mx25u64: spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "mxicy,mx25u6435f", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+	};
+};
+
 &tdmif_b {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
index ccd0bce..325e448 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
@@ -485,7 +485,7 @@ &sd_emmc_b {
 /* eMMC */
 &sd_emmc_c {
 	status = "okay";
-	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
 	pinctrl-1 = <&emmc_clk_gate_pins>;
 	pinctrl-names = "default", "clk-gate";
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 40db06e..03f79fe 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -12,6 +12,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -83,6 +84,7 @@ cpu0: cpu@0 {
 			enable-method = "psci";
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
@@ -92,6 +94,7 @@ cpu1: cpu@1 {
 			enable-method = "psci";
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@2 {
@@ -101,6 +104,7 @@ cpu2: cpu@2 {
 			enable-method = "psci";
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@3 {
@@ -110,6 +114,7 @@ cpu3: cpu@3 {
 			enable-method = "psci";
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
+			#cooling-cells = <2>;
 		};
 
 		l2: l2-cache0 {
@@ -117,6 +122,53 @@ l2: l2-cache0 {
 		};
 	};
 
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>; /* milliseconds */
+			polling-delay = <1000>; /* milliseconds */
+
+			thermal-sensors = <&scpi_sensors 0>;
+
+			trips {
+				cpu_passive: cpu-passive {
+					temperature = <80000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+
+				cpu_hot: cpu-hot {
+					temperature = <90000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "hot";
+				};
+
+				cpu_critical: cpu-critical {
+					temperature = <110000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+
+			cpu_cooling_maps: cooling-maps {
+				map0 {
+					trip = <&cpu_passive>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&cpu_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
 	arm-pmu {
 		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 6ded279..b46ef98 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -248,6 +248,7 @@ &ir {
 	status = "okay";
 	pinctrl-0 = <&remote_input_ao_pins>;
 	pinctrl-names = "default";
+	linux,rc-map-name = "rc-odroid";
 };
 
 &gpio_ao {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index 5eab3df..45cb836 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -245,6 +245,9 @@ &uart_A {
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
 		shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
index 43eb7d1..6ac678f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
@@ -15,7 +15,6 @@
 / {
 	aliases {
 		serial0 = &uart_AO;
-		serial1 = &uart_A;
 		ethernet0 = &ethmac;
 	};
 
@@ -180,6 +179,14 @@ &uart_A {
 	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
 	pinctrl-names = "default";
 	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
 };
 
 &uart_AO {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
index d5dc128..27eeab7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
@@ -8,7 +8,6 @@
 /dts-v1/;
 
 #include <dt-bindings/input/input.h>
-#include <dt-bindings/thermal/thermal.h>
 
 #include "meson-gxm.dtsi"
 
@@ -100,49 +99,6 @@ sdio_pwrseq: sdio-pwrseq {
 		clock-names = "ext_clock";
 	};
 
-	thermal-zones {
-		cpu-thermal {
-			polling-delay-passive = <250>; /* milliseconds */
-			polling-delay = <1000>; /* milliseconds */
-
-			thermal-sensors = <&scpi_sensors 0>;
-
-			trips {
-				cpu_alert0: cpu-alert0 {
-					temperature = <70000>; /* millicelsius */
-					hysteresis = <2000>; /* millicelsius */
-					type = "active";
-				};
-
-				cpu_alert1: cpu-alert1 {
-					temperature = <80000>; /* millicelsius */
-					hysteresis = <2000>; /* millicelsius */
-					type = "passive";
-				};
-			};
-
-			cooling-maps {
-				map0 {
-					trip = <&cpu_alert0>;
-					cooling-device = <&gpio_fan THERMAL_NO_LIMIT 1>;
-				};
-
-				map1 {
-					trip = <&cpu_alert1>;
-					cooling-device = <&gpio_fan 2 THERMAL_NO_LIMIT>,
-							 <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
-		};
-	};
-
 	hdmi_5v: regulator-hdmi-5v {
 		compatible = "regulator-fixed";
 
@@ -198,36 +154,23 @@ &cec_AO {
 	hdmi-phandle = <&hdmi_tx>;
 };
 
-&cpu0 {
-	#cooling-cells = <2>;
-};
 
-&cpu1 {
-	#cooling-cells = <2>;
-};
+&cpu_cooling_maps {
+	map0 {
+		cooling-device = <&gpio_fan THERMAL_NO_LIMIT 1>;
+	};
 
-&cpu2 {
-	#cooling-cells = <2>;
-};
-
-&cpu3 {
-	#cooling-cells = <2>;
-};
-
-&cpu4 {
-	#cooling-cells = <2>;
-};
-
-&cpu5 {
-	#cooling-cells = <2>;
-};
-
-&cpu6 {
-	#cooling-cells = <2>;
-};
-
-&cpu7 {
-	#cooling-cells = <2>;
+	map1 {
+		cooling-device = <&gpio_fan 2 THERMAL_NO_LIMIT>,
+				 <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+	};
 };
 
 &ethmac {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
index 5ff64a0..b6f89f1 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
@@ -49,6 +49,7 @@ cpu4: cpu@100 {
 			enable-method = "psci";
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 1>;
+			#cooling-cells = <2>;
 		};
 
 		cpu5: cpu@101 {
@@ -58,6 +59,7 @@ cpu5: cpu@101 {
 			enable-method = "psci";
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 1>;
+			#cooling-cells = <2>;
 		};
 
 		cpu6: cpu@102 {
@@ -67,6 +69,7 @@ cpu6: cpu@102 {
 			enable-method = "psci";
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 1>;
+			#cooling-cells = <2>;
 		};
 
 		cpu7: cpu@103 {
@@ -76,6 +79,7 @@ cpu7: cpu@103 {
 			enable-method = "psci";
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 1>;
+			#cooling-cells = <2>;
 		};
 	};
 };
@@ -124,6 +128,30 @@ &clkc_AO {
 	compatible = "amlogic,meson-gxm-aoclkc", "amlogic,meson-gx-aoclkc";
 };
 
+&cpu_cooling_maps {
+	map0 {
+		cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+	};
+
+	map1 {
+		cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+	};
+};
+
 &saradc {
 	compatible = "amlogic,meson-gxm-saradc", "amlogic,meson-saradc";
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
index 90815fa..094ecf2 100644
--- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
@@ -9,8 +9,6 @@
 #include <dt-bindings/gpio/meson-g12a-gpio.h>
 
 / {
-	model = "Khadas VIM3";
-
 	aliases {
 		serial0 = &uart_AO;
 		ethernet0 = &ethmac;
@@ -312,7 +310,7 @@ &sd_emmc_b {
 /* eMMC */
 &sd_emmc_c {
 	status = "okay";
-	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
 	pinctrl-1 = <&emmc_clk_gate_pins>;
 	pinctrl-names = "default", "clk-gate";
 
@@ -328,6 +326,26 @@ &sd_emmc_c {
 	vqmmc-supply = <&emmc_1v8>;
 };
 
+/*
+ * EMMC_D4, EMMC_D5, EMMC_D6 and EMMC_D7 pins are shared between SPI NOR CS
+ * and eMMC Data 4 to 7 pins.
+ * Replace emmc_data_8b_pins to emmc_data_4b_pins from sd_emmc_c pinctrl-0,
+ * and change bus-width to 4 then spifc can be enabled.
+ */
+&spifc {
+	status = "disabled";
+	pinctrl-0 = <&nor_pins>;
+	pinctrl-names = "default";
+
+	w25q32: spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q128fw", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+	};
+};
+
 &uart_A {
 	status = "okay";
 	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
index cb1b48f..dfb2438 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
@@ -518,7 +518,7 @@ &sd_emmc_b {
 /* eMMC */
 &sd_emmc_c {
 	status = "okay";
-	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
 	pinctrl-1 = <&emmc_clk_gate_pins>;
 	pinctrl-names = "default", "clk-gate";
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
index d847a3f..d4ec735 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
@@ -448,6 +448,7 @@ pdm: audio-controller@61000 {
 			 <&clkc_audio AUD_CLKID_PDM_DCLK>,
 			 <&clkc_audio AUD_CLKID_PDM_SYSCLK>;
 		clock-names = "pclk", "dclk", "sysclk";
+		resets = <&clkc_audio AUD_RESET_PDM>;
 		status = "disabled";
 	};
 };
diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dtsi b/arch/arm64/boot/dts/arm/foundation-v8.dtsi
index 3f78373..12f039f 100644
--- a/arch/arm64/boot/dts/arm/foundation-v8.dtsi
+++ b/arch/arm64/boot/dts/arm/foundation-v8.dtsi
@@ -92,7 +92,7 @@ watchdog@2a440000 {
 		timeout-sec = <30>;
 	};
 
-	smb@8000000 {
+	bus@8000000 {
 		compatible = "arm,vexpress,v2m-p1", "simple-bus";
 		arm,v2m-memory-map = "rs1";
 		#address-cells = <2>; /* SMB chipselect number and offset */
diff --git a/arch/arm64/boot/dts/arm/fvp-base-revc.dts b/arch/arm64/boot/dts/arm/fvp-base-revc.dts
index 335fff7..66381d8 100644
--- a/arch/arm64/boot/dts/arm/fvp-base-revc.dts
+++ b/arch/arm64/boot/dts/arm/fvp-base-revc.dts
@@ -206,7 +206,7 @@ panel-timing {
 	       };
 	};
 
-	smb@8000000 {
+	bus@8000000 {
 		compatible = "simple-bus";
 
 		#address-cells = <2>;
diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index 1f3c80a..f588928 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -800,7 +800,7 @@ memory@80000000 {
 		      <0x00000008 0x80000000 0x1 0x80000000>;
 	};
 
-	smb@8000000 {
+	bus@8000000 {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
index 9f60dac..e3983de 100644
--- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
@@ -8,7 +8,7 @@
  */
 
 / {
-	smb@8000000 {
+	bus@8000000 {
 		mb_clk24mhz: clk24mhz {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
index 6e685d8..c5d15cb 100644
--- a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
+++ b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
@@ -132,7 +132,7 @@ panel_in: endpoint {
 		};
 	};
 
-	smb@8000000 {
+	bus@8000000 {
 		compatible = "simple-bus";
 
 		#address-cells = <2>;
diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi
index 57b0b9d..60703b5 100644
--- a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi
+++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi
@@ -5,7 +5,7 @@
  * "rs2" extension for the v2m motherboard
  */
 / {
-	smb@8000000 {
+	bus@8000000 {
 		motherboard {
 			arm,v2m-memory-map = "rs2";
 
diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
index 03a7bf0..e333c8d 100644
--- a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
+++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
@@ -8,7 +8,7 @@
  * VEMotherBoard.lisa
  */
 / {
-	smb@8000000 {
+	bus@8000000 {
 		motherboard {
 			arm,v2m-memory-map = "rs1";
 			compatible = "arm,vexpress,v2m-p1", "simple-bus";
diff --git a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
index 22383c2..d859914 100644
--- a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
+++ b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
@@ -144,7 +144,7 @@ temp-fpga {
 		};
 	};
 
-	smb: smb@8000000 {
+	smb: bus@8000000 {
 		compatible = "simple-bus";
 
 		#address-cells = <2>;
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index bac293e..a39f0a1 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -4,6 +4,11 @@
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-oxalis.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-kbox-a-230-ls.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var2.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var3-ads2.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var4.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
@@ -26,6 +31,7 @@
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
new file mode 100644
index 0000000..4b4cc6a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree File for the Kontron KBox A-230-LS.
+ *
+ * This consists of a Kontron SMARC-sAL28 (Dual PHY) and a special
+ * carrier (s1914).
+ *
+ * Copyright (C) 2019 Michael Walle <michael@walle.cc>
+ *
+ */
+
+/dts-v1/;
+#include "fsl-ls1028a-kontron-sl28-var4.dts"
+
+/ {
+	model = "Kontron KBox A-230-LS";
+	compatible = "kontron,kbox-a-230-ls", "kontron,sl28-var4",
+		     "kontron,sl28", "fsl,ls1028a";
+};
+
+&enetc_mdio_pf3 {
+	/* BCM54140 QSGMII quad PHY */
+	qsgmii_phy0: ethernet-phy@7 {
+		reg = <7>;
+	};
+
+	qsgmii_phy1: ethernet-phy@8 {
+		reg = <8>;
+	};
+
+	qsgmii_phy2: ethernet-phy@9 {
+		reg = <9>;
+	};
+
+	qsgmii_phy3: ethernet-phy@10 {
+		reg = <10>;
+	};
+};
+
+&enetc_port2 {
+	status = "okay";
+};
+
+&i2c3 {
+	eeprom@57 {
+		compatible = "atmel,24c32";
+		reg = <0x57>;
+		pagesize = <32>;
+	};
+};
+
+&mscc_felix {
+	status = "okay";
+};
+
+&mscc_felix_port0 {
+	label = "swp0";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy0>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port1 {
+	label = "swp1";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy1>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port2 {
+	label = "swp2";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy2>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port3 {
+	label = "swp3";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy3>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port4 {
+	ethernet = <&enetc_port2>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
new file mode 100644
index 0000000..901b5b1
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for the Kontron SMARC-sAL28 board.
+ *
+ * This is for the network variant 2 which has two ethernet ports. These
+ * ports are connected to the internal switch.
+ *
+ * Copyright (C) 2020 Michael Walle <michael@walle.cc>
+ *
+ */
+
+/dts-v1/;
+#include "fsl-ls1028a-kontron-sl28.dts"
+
+/ {
+	model = "Kontron SMARC-sAL28 (TSN-on-module)";
+	compatible = "kontron,sl28-var2", "kontron,sl28", "fsl,ls1028a";
+};
+
+&enetc_mdio_pf3 {
+	phy0: ethernet-phy@5 {
+		reg = <0x5>;
+		eee-broken-1000t;
+		eee-broken-100tx;
+	};
+
+	phy1: ethernet-phy@4 {
+		reg = <0x4>;
+		eee-broken-1000t;
+		eee-broken-100tx;
+	};
+};
+
+&enetc_port0 {
+	status = "disabled";
+	/*
+	 * In the base device tree the PHY was registered in the mdio
+	 * subnode as it is PHY for this port. On this module this PHY
+	 * is connected to a switch port instead and registered above.
+	 * Therefore, delete the mdio subnode as well as the phy-handle
+	 * property here.
+	 */
+	/delete-property/ phy-handle;
+	/delete-node/ mdio;
+};
+
+&enetc_port2 {
+	status = "okay";
+};
+
+&mscc_felix {
+	status = "okay";
+};
+
+&mscc_felix_port0 {
+	label = "gbe0";
+	phy-handle = <&phy0>;
+	phy-mode = "sgmii";
+	status = "okay";
+};
+
+&mscc_felix_port1 {
+	label = "gbe1";
+	phy-handle = <&phy1>;
+	phy-mode = "sgmii";
+	status = "okay";
+};
+
+&mscc_felix_port4 {
+	ethernet = <&enetc_port2>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
new file mode 100644
index 0000000..0973a6a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for the Kontron SMARC-sAL28 board on a SMARC Eval 2.0
+ * carrier (ADS2).
+ *
+ * Copyright (C) 2019 Michael Walle <michael@walle.cc>
+ *
+ */
+
+/dts-v1/;
+#include "fsl-ls1028a-kontron-sl28.dts"
+
+/ {
+	model = "Kontron SMARC-sAL28 (Single PHY) on SMARC Eval 2.0 carrier";
+	compatible = "kontron,sl28-var3-ads2", "kontron,sl28-var3",
+		     "kontron,sl28", "fsl,ls1028a";
+
+	sound {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "simple-audio-card";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Line", "Line Out Jack",
+			"Microphone", "Microphone Jack",
+			"Line", "Line In Jack";
+		simple-audio-card,routing =
+			"Line Out Jack", "LINEOUTR",
+			"Line Out Jack", "LINEOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"IN1L", "Line In Jack",
+			"IN1R", "Line In Jack",
+			"Microphone Jack", "MICBIAS",
+			"IN2L", "Microphone Jack",
+			"IN2R", "Microphone Jack";
+		simple-audio-card,mclk-fs = <256>;
+
+		simple-audio-card,dai-link@0 {
+			reg = <0>;
+			bitclock-master = <&dailink0_master>;
+			frame-master = <&dailink0_master>;
+			format = "i2s";
+
+			cpu {
+				sound-dai = <&sai6>;
+			};
+
+			dailink0_master: codec {
+				sound-dai = <&wm8904>;
+			};
+		};
+
+		simple-audio-card,dai-link@1 {
+			reg = <1>;
+			bitclock-master = <&dailink1_master>;
+			frame-master = <&dailink1_master>;
+			format = "i2s";
+
+			cpu {
+				sound-dai = <&sai5>;
+			};
+
+			dailink1_master: codec {
+				sound-dai = <&wm8904>;
+			};
+		};
+	};
+};
+
+&dspi2 {
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		m25p,fast-read;
+		spi-max-frequency = <100000000>;
+		reg = <0>;
+	};
+};
+
+&i2c3 {
+	eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <32>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	wm8904: audio-codec@1a {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+		clocks = <&mclk>;
+		clock-names = "mclk";
+		assigned-clocks = <&mclk>;
+		assigned-clock-rates = <1250000>;
+	};
+};
+
+&sai5 {
+	status = "okay";
+};
+
+&sai6 {
+	status = "okay";
+};
+
+&soc {
+	mclk: clock-mclk@f130080 {
+		compatible = "fsl,vf610-sai-clock";
+		reg = <0x0 0xf130080 0x0 0x80>;
+		clocks = <&clockgen 4 1>;
+		#clock-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
new file mode 100644
index 0000000..df212ed
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for the Kontron SMARC-sAL28 board.
+ *
+ * This is for the network variant 4 which has two ethernet ports. It
+ * extends the base and provides one more port connected via RGMII.
+ *
+ * Copyright (C) 2019 Michael Walle <michael@walle.cc>
+ *
+ */
+
+/dts-v1/;
+#include "fsl-ls1028a-kontron-sl28.dts"
+#include <dt-bindings/net/qca-ar803x.h>
+
+/ {
+	model = "Kontron SMARC-sAL28 (Dual PHY)";
+	compatible = "kontron,sl28-var4", "kontron,sl28", "fsl,ls1028a";
+};
+
+&enetc_port1 {
+	phy-handle = <&phy1>;
+	phy-connection-type = "rgmii-id";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy1: ethernet-phy@4 {
+			reg = <0x4>;
+			eee-broken-1000t;
+			eee-broken-100tx;
+
+			qca,clk-out-frequency = <125000000>;
+			qca,clk-out-strength = <AR803X_STRENGTH_FULL>;
+
+			vddio-supply = <&vddh>;
+
+			vddio: vddio-regulator {
+				regulator-name = "VDDIO";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vddh: vddh-regulator {
+				regulator-name = "VDDH";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
new file mode 100644
index 0000000..1648a04
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
@@ -0,0 +1,187 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for the Kontron SMARC-sAL28 board.
+ *
+ * Copyright (C) 2019 Michael Walle <michael@walle.cc>
+ *
+ */
+
+/dts-v1/;
+#include "fsl-ls1028a.dtsi"
+
+/ {
+	model = "Kontron SMARC-sAL28";
+	compatible = "kontron,sl28", "fsl,ls1028a";
+
+	aliases {
+		crypto = &crypto;
+		serial0 = &duart0;
+		serial1 = &duart1;
+		spi0 = &fspi;
+		spi1 = &dspi2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&dspi2 {
+	status = "okay";
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+&enetc_port0 {
+	phy-handle = <&phy0>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@5 {
+			reg = <0x5>;
+			eee-broken-1000t;
+			eee-broken-100tx;
+		};
+	};
+};
+
+&esdhc {
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
+	status = "okay";
+};
+
+&esdhc1 {
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&fspi {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		m25p,fast-read;
+		spi-max-frequency = <133000000>;
+		reg = <0>;
+		/* The following setting enables 1-1-2 (CMD-ADDR-DATA) mode */
+		spi-rx-bus-width = <2>; /* 2 SPI Rx lines */
+		spi-tx-bus-width = <1>; /* 1 SPI Tx line */
+
+		partition@0 {
+			reg = <0x000000 0x010000>;
+			label = "rcw";
+			read-only;
+		};
+
+		partition@10000 {
+			reg = <0x010000 0x0f0000>;
+			label = "failsafe bootloader";
+			read-only;
+		};
+
+		partition@100000 {
+			reg = <0x100000 0x040000>;
+			label = "failsafe DP firmware";
+			read-only;
+		};
+
+		partition@140000 {
+			reg = <0x140000 0x0a0000>;
+			label = "failsafe trusted firmware";
+			read-only;
+		};
+
+		partition@1e0000 {
+			reg = <0x1e0000 0x020000>;
+			label = "reserved";
+			read-only;
+		};
+
+		partition@200000 {
+			reg = <0x200000 0x010000>;
+			label = "configuration store";
+		};
+
+		partition@210000 {
+			reg = <0x210000 0x0f0000>;
+			label = "bootloader";
+		};
+
+		partition@300000 {
+			reg = <0x300000 0x040000>;
+			label = "DP firmware";
+		};
+
+		partition@340000 {
+			reg = <0x340000 0x0a0000>;
+			label = "trusted firmware";
+		};
+
+		partition@3e0000 {
+			reg = <0x3e0000 0x020000>;
+			label = "bootloader environment";
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "TDO", "TCK",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"", "", "", "", "", "", "TMS", "TDI",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rtc@32 {
+		compatible = "microcrystal,rv8803";
+		reg = <0x32>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index ca409d9..dd69c5b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -225,6 +225,7 @@ mux: mux-controller {
 &enetc_port1 {
 	phy-handle = <&qds_phy1>;
 	phy-connection-type = "rgmii-id";
+	status = "okay";
 };
 
 &sai1 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index afb5565..c2dc123 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -177,9 +177,29 @@ &duart1 {
 	status = "okay";
 };
 
+&enetc_mdio_pf3 {
+	/* VSC8514 QSGMII quad PHY */
+	qsgmii_phy0: ethernet-phy@10 {
+		reg = <0x10>;
+	};
+
+	qsgmii_phy1: ethernet-phy@11 {
+		reg = <0x11>;
+	};
+
+	qsgmii_phy2: ethernet-phy@12 {
+		reg = <0x12>;
+	};
+
+	qsgmii_phy3: ethernet-phy@13 {
+		reg = <0x13>;
+	};
+};
+
 &enetc_port0 {
 	phy-handle = <&sgmii_phy0>;
 	phy-connection-type = "sgmii";
+	status = "okay";
 
 	mdio {
 		#address-cells = <1>;
@@ -190,8 +210,49 @@ sgmii_phy0: ethernet-phy@2 {
 	};
 };
 
-&enetc_port1 {
-	status = "disabled";
+&enetc_port2 {
+	status = "okay";
+};
+
+&mscc_felix {
+	status = "okay";
+};
+
+&mscc_felix_port0 {
+	label = "swp0";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy0>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port1 {
+	label = "swp1";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy1>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port2 {
+	label = "swp2";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy2>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port3 {
+	label = "swp3";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy3>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port4 {
+	ethernet = <&enetc_port2>;
+	status = "okay";
 };
 
 &sai4 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index c28a25b..2a7f70b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -290,6 +290,45 @@ fspi: spi@20c0000 {
 			status = "disabled";
 		};
 
+		dspi0: spi@2100000 {
+			compatible = "fsl,ls1028a-dspi", "fsl,ls1021a-v1.0-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2100000 0x0 0x10000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "dspi";
+			clocks = <&clockgen 4 1>;
+			spi-num-chipselects = <4>;
+			little-endian;
+			status = "disabled";
+		};
+
+		dspi1: spi@2110000 {
+			compatible = "fsl,ls1028a-dspi", "fsl,ls1021a-v1.0-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2110000 0x0 0x10000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "dspi";
+			clocks = <&clockgen 4 1>;
+			spi-num-chipselects = <4>;
+			little-endian;
+			status = "disabled";
+		};
+
+		dspi2: spi@2120000 {
+			compatible = "fsl,ls1028a-dspi", "fsl,ls1021a-v1.0-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2120000 0x0 0x10000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "dspi";
+			clocks = <&clockgen 4 1>;
+			spi-num-chipselects = <3>;
+			little-endian;
+			status = "disabled";
+		};
+
 		esdhc: mmc@2140000 {
 			compatible = "fsl,ls1028a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x2140000 0x0 0x10000>;
@@ -484,6 +523,60 @@ sata: sata@3200000 {
 			status = "disabled";
 		};
 
+		pcie@3400000 {
+			compatible = "fsl,ls1028a-pcie";
+			reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
+			       0x80 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+			interrupt-names = "pme", "aer";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			num-viewport = <8>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x80 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 0 GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 0 GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
+		pcie@3500000 {
+			compatible = "fsl,ls1028a-pcie";
+			reg = <0x00 0x03500000 0x0 0x00100000   /* controller registers */
+			       0x88 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pme", "aer";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			num-viewport = <8>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x88 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 0 GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 0 GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
 		smmu: iommu@5000000 {
 			compatible = "arm,mmu-500";
 			reg = <0 0x5000000 0 0x800000>;
@@ -756,7 +849,6 @@ pcie@1f0000000 { /* Integrated Endpoint Root Complex */
 			reg = <0x01 0xf0000000 0x0 0x100000>;
 			#address-cells = <3>;
 			#size-cells = <2>;
-			#interrupt-cells = <1>;
 			msi-parent = <&its>;
 			device_type = "pci";
 			bus-range = <0x0 0x0>;
@@ -774,27 +866,115 @@ pcie@1f0000000 { /* Integrated Endpoint Root Complex */
 				  /* PF1: VF0-1 BAR0 - non-prefetchable memory */
 				  0x82000000 0x0 0x00000000  0x1 0xf8210000  0x0 0x020000
 				  /* PF1: VF0-1 BAR2 - prefetchable memory */
-				  0xc2000000 0x0 0x00000000  0x1 0xf8230000  0x0 0x020000>;
+				  0xc2000000 0x0 0x00000000  0x1 0xf8230000  0x0 0x020000
+				  /* BAR4 (PF5) - non-prefetchable memory */
+				  0x82000000 0x0 0x00000000  0x1 0xfc000000  0x0 0x400000>;
 
 			enetc_port0: ethernet@0,0 {
 				compatible = "fsl,enetc";
 				reg = <0x000000 0 0 0 0>;
+				status = "disabled";
 			};
+
 			enetc_port1: ethernet@0,1 {
 				compatible = "fsl,enetc";
 				reg = <0x000100 0 0 0 0>;
+				status = "disabled";
 			};
+
+			enetc_port2: ethernet@0,2 {
+				compatible = "fsl,enetc";
+				reg = <0x000200 0 0 0 0>;
+				phy-mode = "internal";
+				status = "disabled";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
 			enetc_mdio_pf3: mdio@0,3 {
 				compatible = "fsl,enetc-mdio";
 				reg = <0x000300 0 0 0 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 			};
+
 			ethernet@0,4 {
 				compatible = "fsl,enetc-ptp";
 				reg = <0x000400 0 0 0 0>;
 				clocks = <&clockgen 4 0>;
 				little-endian;
+				fsl,extts-fifo;
+			};
+
+			mscc_felix: ethernet-switch@0,5 {
+				reg = <0x000500 0 0 0 0>;
+				/* IEP INT_B */
+				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					/* External ports */
+					mscc_felix_port0: port@0 {
+						reg = <0>;
+						status = "disabled";
+					};
+
+					mscc_felix_port1: port@1 {
+						reg = <1>;
+						status = "disabled";
+					};
+
+					mscc_felix_port2: port@2 {
+						reg = <2>;
+						status = "disabled";
+					};
+
+					mscc_felix_port3: port@3 {
+						reg = <3>;
+						status = "disabled";
+					};
+
+					/* Internal ports */
+					mscc_felix_port4: port@4 {
+						reg = <4>;
+						phy-mode = "internal";
+						status = "disabled";
+
+						fixed-link {
+							speed = <2500>;
+							full-duplex;
+						};
+					};
+
+					mscc_felix_port5: port@5 {
+						reg = <5>;
+						phy-mode = "internal";
+						status = "disabled";
+
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+						};
+					};
+				};
+			};
+
+			enetc_port3: ethernet@0,6 {
+				compatible = "fsl,enetc";
+				reg = <0x000600 0 0 0 0>;
+				phy-mode = "internal";
+				status = "disabled";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
 			};
 		};
 	};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
index 4d77b34..5633e59 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -83,6 +83,7 @@ &duart1 {
 };
 
 &esdhc {
+	mmc-hs200-1_8v;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 5945662..36a7995 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -393,6 +393,7 @@ esdhc: esdhc@2140000 {
 			reg = <0x0 0x2140000 0x0 0x10000>;
 			interrupts = <0 28 0x4>; /* Level high type */
 			clock-frequency = <0>;
+			clocks = <&clockgen 2 1>;
 			voltage-ranges = <1800 1800 3300 3300>;
 			sdhci,auto-cmd12;
 			little-endian;
@@ -493,6 +494,7 @@ pcie@3400000 {
 					<0000 0 0 2 &gic 0 0 0 110 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 3 &gic 0 0 0 111 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 4 &gic 0 0 0 112 IRQ_TYPE_LEVEL_HIGH>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
 			status = "disabled";
 		};
 
@@ -518,6 +520,7 @@ pcie@3500000 {
 					<0000 0 0 2 &gic 0 0 0 115 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 3 &gic 0 0 0 116 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 4 &gic 0 0 0 117 IRQ_TYPE_LEVEL_HIGH>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
 			status = "disabled";
 		};
 
@@ -543,6 +546,7 @@ pcie@3600000 {
 					<0000 0 0 2 &gic 0 0 0 120 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 3 &gic 0 0 0 121 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 4 &gic 0 0 0 122 IRQ_TYPE_LEVEL_HIGH>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
 			status = "disabled";
 		};
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index f96d06d..3944ef1 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -648,6 +648,7 @@ pcie1: pcie@3400000 {
 					<0000 0 0 2 &gic 0 0 0 110 4>,
 					<0000 0 0 3 &gic 0 0 0 111 4>,
 					<0000 0 0 4 &gic 0 0 0 112 4>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
 			status = "disabled";
 		};
 
@@ -669,6 +670,7 @@ pcie2: pcie@3500000 {
 					<0000 0 0 2 &gic 0 0 0 115 4>,
 					<0000 0 0 3 &gic 0 0 0 116 4>,
 					<0000 0 0 4 &gic 0 0 0 117 4>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
 			status = "disabled";
 		};
 
@@ -690,6 +692,7 @@ pcie3: pcie@3600000 {
 					<0000 0 0 2 &gic 0 0 0 120 4>,
 					<0000 0 0 3 &gic 0 0 0 121 4>,
 					<0000 0 0 4 &gic 0 0 0 122 4>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
 			status = "disabled";
 		};
 
@@ -711,6 +714,7 @@ pcie4: pcie@3700000 {
 					<0000 0 0 2 &gic 0 0 0 125 4>,
 					<0000 0 0 3 &gic 0 0 0 126 4>,
 					<0000 0 0 4 &gic 0 0 0 127 4>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
 			status = "disabled";
 		};
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
index 071e216..d87d164 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
@@ -59,6 +59,32 @@ i2c-switch@77 {
 		#size-cells = <0>;
 		reg = <0x77>;
 
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c512";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,spd";
+				reg = <0x51>;
+			};
+
+			eeprom@53 {
+				compatible = "atmel,spd";
+				reg = <0x53>;
+			};
+
+			eeprom@57 {
+				compatible = "atmel,24c02";
+				reg = <0x57>;
+			};
+		};
+
 		i2c@1 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -73,6 +99,17 @@ fan-temperature-ctrlr@18 {
 			};
 		};
 
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			regulator@5c {
+				compatible = "lltc,ltc3882";
+				reg = <0x5c>;
+			};
+		};
+
 		i2c@3 {
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
index 1a5acf6..3b88e1e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
@@ -43,6 +43,21 @@ &esdhc1 {
 	status = "okay";
 };
 
+&fspi {
+	status = "okay";
+
+	mt35xu512aba0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+		spi-rx-bus-width = <8>;
+		spi-tx-bus-width = <8>;
+	};
+};
+
 &i2c0 {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
index 51615de..22d0308 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
@@ -84,7 +84,7 @@ &fspi {
 	mt35xu512aba0: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "spansion,m25p80";
+		compatible = "jedec,spi-nor";
 		m25p,fast-read;
 		spi-max-frequency = <50000000>;
 		reg = <0>;
@@ -95,7 +95,7 @@ mt35xu512aba0: flash@0 {
 	mt35xu512aba1: flash@1 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "spansion,m25p80";
+		compatible = "jedec,spi-nor";
 		m25p,fast-read;
 		spi-max-frequency = <50000000>;
 		reg = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index e5ee559..ae1b113 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -834,6 +834,174 @@ sata3: sata@3230000 {
 			status = "disabled";
 		};
 
+		pcie@3400000 {
+			compatible = "fsl,lx2160a-pcie";
+			reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
+			       0x80 0x00000000 0x0 0x00001000>; /* configuration space */
+			reg-names = "csr_axi_slave", "config_axi_slave";
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+			interrupt-names = "aer", "pme", "intr";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			apio-wins = <8>;
+			ppio-wins = <8>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 0 GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 0 GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
+		pcie@3500000 {
+			compatible = "fsl,lx2160a-pcie";
+			reg = <0x00 0x03500000 0x0 0x00100000   /* controller registers */
+			       0x88 0x00000000 0x0 0x00001000>; /* configuration space */
+			reg-names = "csr_axi_slave", "config_axi_slave";
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+			interrupt-names = "aer", "pme", "intr";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			apio-wins = <8>;
+			ppio-wins = <8>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 0 GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 0 GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
+		pcie@3600000 {
+			compatible = "fsl,lx2160a-pcie";
+			reg = <0x00 0x03600000 0x0 0x00100000   /* controller registers */
+			       0x90 0x00000000 0x0 0x00001000>; /* configuration space */
+			reg-names = "csr_axi_slave", "config_axi_slave";
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+			interrupt-names = "aer", "pme", "intr";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			apio-wins = <256>;
+			ppio-wins = <24>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x82000000 0x0 0x40000000 0x90 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 0 GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 0 GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
+		pcie@3700000 {
+			compatible = "fsl,lx2160a-pcie";
+			reg = <0x00 0x03700000 0x0 0x00100000   /* controller registers */
+			       0x98 0x00000000 0x0 0x00001000>; /* configuration space */
+			reg-names = "csr_axi_slave", "config_axi_slave";
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+			interrupt-names = "aer", "pme", "intr";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			apio-wins = <8>;
+			ppio-wins = <8>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x82000000 0x0 0x40000000 0x98 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 0 GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 0 GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
+		pcie@3800000 {
+			compatible = "fsl,lx2160a-pcie";
+			reg = <0x00 0x03800000 0x0 0x00100000   /* controller registers */
+			       0xa0 0x00000000 0x0 0x00001000>; /* configuration space */
+			reg-names = "csr_axi_slave", "config_axi_slave";
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+			interrupt-names = "aer", "pme", "intr";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			apio-wins = <256>;
+			ppio-wins = <24>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x82000000 0x0 0x40000000 0xa0 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 0 GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 0 GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
+		pcie@3900000 {
+			compatible = "fsl,lx2160a-pcie";
+			reg = <0x00 0x03900000 0x0 0x00100000   /* controller registers */
+			       0xa8 0x00000000 0x0 0x00001000>; /* configuration space */
+			reg-names = "csr_axi_slave", "config_axi_slave";
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+			interrupt-names = "aer", "pme", "intr";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			apio-wins = <8>;
+			ppio-wins = <8>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x82000000 0x0 0x40000000 0xa8 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 0 GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 0 GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
 		smmu: iommu@5000000 {
 			compatible = "arm,mmu-500";
 			reg = <0 0x5000000 0 0x800000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
index 9e54747..951e14a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
@@ -107,6 +107,8 @@ &fec1 {
 	pinctrl-0 = <&pinctrl_fec1>;
 	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy0>;
+	phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <10>;
 	fsl,magic-packet;
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 1e5e115..cc7152e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -68,6 +68,7 @@ A53_0: cpu@0 {
 			nvmem-cells = <&cpu_speed_grade>;
 			nvmem-cell-names = "speed_grade";
 			cpu-idle-states = <&cpu_pd_wait>;
+			#cooling-cells = <2>;
 		};
 
 		A53_1: cpu@1 {
@@ -80,6 +81,7 @@ A53_1: cpu@1 {
 			next-level-cache = <&A53_L2>;
 			operating-points-v2 = <&a53_opp_table>;
 			cpu-idle-states = <&cpu_pd_wait>;
+			#cooling-cells = <2>;
 		};
 
 		A53_2: cpu@2 {
@@ -92,6 +94,7 @@ A53_2: cpu@2 {
 			next-level-cache = <&A53_L2>;
 			operating-points-v2 = <&a53_opp_table>;
 			cpu-idle-states = <&cpu_pd_wait>;
+			#cooling-cells = <2>;
 		};
 
 		A53_3: cpu@3 {
@@ -104,6 +107,7 @@ A53_3: cpu@3 {
 			next-level-cache = <&A53_L2>;
 			operating-points-v2 = <&a53_opp_table>;
 			cpu-idle-states = <&cpu_pd_wait>;
+			#cooling-cells = <2>;
 		};
 
 		A53_L2: l2-cache0 {
@@ -204,6 +208,38 @@ timer {
 		arm,no-tick-in-suspend;
 	};
 
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tmu>;
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit0: trip1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+						<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
 	usbphynop1: usbphynop1 {
 		compatible = "usb-nop-xceiv";
 		clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
@@ -227,7 +263,8 @@ soc@0 {
 		ranges = <0x0 0x0 0x0 0x3e000000>;
 
 		aips1: bus@30000000 {
-			compatible = "simple-bus";
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x301f0000 0x10000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x30000000 0x30000000 0x400000>;
@@ -363,6 +400,13 @@ gpio5: gpio@30240000 {
 				gpio-ranges = <&iomuxc 0 119 30>;
 			};
 
+			tmu: tmu@30260000 {
+				compatible = "fsl,imx8mm-tmu";
+				reg = <0x30260000 0x10000>;
+				clocks = <&clk IMX8MM_CLK_TMU_ROOT>;
+				#thermal-sensor-cells = <0>;
+			};
+
 			wdog1: watchdog@30280000 {
 				compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
 				reg = <0x30280000 0x10000>;
@@ -455,6 +499,8 @@ snvs_pwrkey: snvs-powerkey {
 					compatible = "fsl,sec-v4.0-pwrkey";
 					regmap = <&snvs>;
 					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MM_CLK_SNVS_ROOT>;
+					clock-names = "snvs-pwrkey";
 					linux,keycode = <KEY_POWER>;
 					wakeup-source;
 					status = "disabled";
@@ -496,7 +542,8 @@ src: reset-controller@30390000 {
 		};
 
 		aips2: bus@30400000 {
-			compatible = "simple-bus";
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x305f0000 0x10000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x30400000 0x30400000 0x400000>;
@@ -555,10 +602,12 @@ system_counter: timer@306a0000 {
 		};
 
 		aips3: bus@30800000 {
-			compatible = "simple-bus";
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x309f0000 0x10000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <0x30800000 0x30800000 0x400000>;
+			ranges = <0x30800000 0x30800000 0x400000>,
+				 <0x8000000 0x8000000 0x10000000>;
 
 			ecspi1: spi@30820000 {
 				compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
@@ -760,6 +809,19 @@ usdhc3: mmc@30b60000 {
 				status = "disabled";
 			};
 
+			flexspi: spi@30bb0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "nxp,imx8mm-fspi";
+				reg = <0x30bb0000 0x10000>, <0x8000000 0x10000000>;
+				reg-names = "fspi_base", "fspi_mmap";
+				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_QSPI_ROOT>,
+					 <&clk IMX8MM_CLK_QSPI_ROOT>;
+				clock-names = "fspi", "fspi_en";
+				status = "disabled";
+			};
+
 			sdma1: dma-controller@30bd0000 {
 				compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
 				reg = <0x30bd0000 0x10000>;
@@ -800,7 +862,8 @@ fec1: ethernet@30be0000 {
 		};
 
 		aips4: bus@32c00000 {
-			compatible = "simple-bus";
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x32df0000 0x10000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x32c00000 0x32c00000 0x400000>;
@@ -896,7 +959,6 @@ ddrc: memory-controller@3d400000 {
 		ddr-pmu@3d800000 {
 			compatible = "fsl,imx8mm-ddr-pmu", "fsl,imx8m-ddr-pmu";
 			reg = <0x3d800000 0x400000>;
-			interrupt-parent = <&gic>;
 			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
index 0d2ec4a..85fc0aa 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
@@ -102,6 +102,20 @@ typec1_con: connector {
 	};
 };
 
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	pca6416: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
@@ -202,6 +216,13 @@ MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
 		>;
 	};
 
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
+		>;
+	};
+
 	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc {
 		fsl,pins = <
 			MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index a44b543..fa78f01 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -7,6 +7,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
 
 #include "imx8mn-pinfunc.h"
 
@@ -67,6 +68,7 @@ A53_0: cpu@0 {
 			nvmem-cells = <&cpu_speed_grade>;
 			nvmem-cell-names = "speed_grade";
 			cpu-idle-states = <&cpu_pd_wait>;
+			#cooling-cells = <2>;
 		};
 
 		A53_1: cpu@1 {
@@ -79,6 +81,7 @@ A53_1: cpu@1 {
 			next-level-cache = <&A53_L2>;
 			operating-points-v2 = <&a53_opp_table>;
 			cpu-idle-states = <&cpu_pd_wait>;
+			#cooling-cells = <2>;
 		};
 
 		A53_2: cpu@2 {
@@ -91,6 +94,7 @@ A53_2: cpu@2 {
 			next-level-cache = <&A53_L2>;
 			operating-points-v2 = <&a53_opp_table>;
 			cpu-idle-states = <&cpu_pd_wait>;
+			#cooling-cells = <2>;
 		};
 
 		A53_3: cpu@3 {
@@ -103,6 +107,7 @@ A53_3: cpu@3 {
 			next-level-cache = <&A53_L2>;
 			operating-points-v2 = <&a53_opp_table>;
 			cpu-idle-states = <&cpu_pd_wait>;
+			#cooling-cells = <2>;
 		};
 
 		A53_L2: l2-cache0 {
@@ -116,7 +121,7 @@ a53_opp_table: opp-table {
 
 		opp-1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <850000>;
+			opp-microvolt = <950000>;
 			opp-supported-hw = <0xb00>, <0x7>;
 			clock-latency-ns = <150000>;
 			opp-suspend;
@@ -186,6 +191,38 @@ psci {
 		method = "smc";
 	};
 
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tmu>;
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit0: trip1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+						<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
@@ -203,8 +240,8 @@ soc@0 {
 		ranges = <0x0 0x0 0x0 0x3e000000>;
 
 		aips1: bus@30000000 {
-			compatible = "simple-bus";
-			reg = <0x30000000 0x400000>;
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x301f0000 0x10000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -274,6 +311,13 @@ gpio5: gpio@30240000 {
 				gpio-ranges = <&iomuxc 0 119 30>;
 			};
 
+			tmu: tmu@30260000 {
+				compatible = "fsl,imx8mn-tmu", "fsl,imx8mm-tmu";
+				reg = <0x30260000 0x10000>;
+				clocks = <&clk IMX8MN_CLK_TMU_ROOT>;
+				#thermal-sensor-cells = <0>;
+			};
+
 			wdog1: watchdog@30280000 {
 				compatible = "fsl,imx8mn-wdt", "fsl,imx21-wdt";
 				reg = <0x30280000 0x10000>;
@@ -358,6 +402,7 @@ snvs_rtc: snvs-rtc-lp {
 					offset = <0x34>;
 					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
 						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_SNVS_ROOT>;
 					clock-names = "snvs-rtc";
 				};
 
@@ -365,6 +410,8 @@ snvs_pwrkey: snvs-powerkey {
 					compatible = "fsl,sec-v4.0-pwrkey";
 					regmap = <&snvs>;
 					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_SNVS_ROOT>;
+					clock-names = "snvs-pwrkey";
 					linux,keycode = <KEY_POWER>;
 					wakeup-source;
 					status = "disabled";
@@ -379,6 +426,16 @@ clk: clock-controller@30380000 {
 					 <&clk_ext3>, <&clk_ext4>;
 				clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
 					      "clk_ext3", "clk_ext4";
+				assigned-clocks = <&clk IMX8MN_CLK_NOC>,
+						<&clk IMX8MN_CLK_AUDIO_AHB>,
+						<&clk IMX8MN_CLK_IPG_AUDIO_ROOT>,
+						<&clk IMX8MN_SYS_PLL3>;
+				assigned-clock-parents = <&clk IMX8MN_SYS_PLL3_OUT>,
+							 <&clk IMX8MN_SYS_PLL1_800M>;
+				assigned-clock-rates = <0>,
+							<400000000>,
+							<400000000>,
+							<600000000>;
 			};
 
 			src: reset-controller@30390000 {
@@ -390,8 +447,8 @@ src: reset-controller@30390000 {
 		};
 
 		aips2: bus@30400000 {
-			compatible = "simple-bus";
-			reg = <0x30400000 0x400000>;
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x305f0000 0x10000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -450,8 +507,8 @@ system_counter: timer@306a0000 {
 		};
 
 		aips3: bus@30800000 {
-			compatible = "simple-bus";
-			reg = <0x30800000 0x400000>;
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x309f0000 0x10000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -543,19 +600,19 @@ crypto: crypto@30900000 {
 					 <&clk IMX8MN_CLK_IPG_ROOT>;
 				clock-names = "aclk", "ipg";
 
-				sec_jr0: jr0@1000 {
+				sec_jr0: jr@1000 {
 					 compatible = "fsl,sec-v4.0-job-ring";
 					 reg = <0x1000 0x1000>;
 					 interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 				};
 
-				sec_jr1: jr1@2000 {
+				sec_jr1: jr@2000 {
 					 compatible = "fsl,sec-v4.0-job-ring";
 					 reg = <0x2000 0x1000>;
 					 interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 				};
 
-				sec_jr2: jr2@3000 {
+				sec_jr2: jr@3000 {
 					 compatible = "fsl,sec-v4.0-job-ring";
 					 reg = <0x3000 0x1000>;
 					 interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
@@ -696,8 +753,8 @@ fec1: ethernet@30be0000 {
 		};
 
 		aips4: bus@32c00000 {
-			compatible = "simple-bus";
-			reg = <0x32c00000 0x400000>;
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x32df0000 0x10000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
new file mode 100644
index 0000000..3da1fff
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -0,0 +1,270 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8mp.dtsi"
+
+/ {
+	model = "NXP i.MX8MPlus EVK board";
+	compatible = "fsl,imx8mp-evk", "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		status {
+			label = "yellow:status";
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0xc0000000>,
+		      <0x1 0x00000000 0 0xc0000000>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			eee-broken-1000t;
+			reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	pca6416: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart2 {
+	/* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x3
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x3
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x91
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x91
+			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2		0x91
+			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3		0x91
+			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x91
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x91
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x1f
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x1f
+			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2		0x1f
+			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3		0x1f
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x1f
+			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC		0x1f
+			MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02		0x19
+		>;
+	};
+
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16	0x19
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c3
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x41
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x49
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX	0x49
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp-200mhz {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2grp-gpio {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12	0x1c4
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h b/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h
new file mode 100644
index 0000000..da78f89
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h
@@ -0,0 +1,931 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 NXP
+ */
+
+#ifndef __DTS_IMX8MP_PINFUNC_H
+#define __DTS_IMX8MP_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00                          0x014 0x274 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO00__CCMSRCGPCMIX_ENET_PHY_REF_CLK_ROOT  0x014 0x274 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO00__MEDIAMIX_ISP_FL_TRIG_0              0x014 0x274 0x5D4 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO00__ANAMIX_REF_CLK_32K                  0x014 0x274 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO00__CCMSRCGPCMIX_EXT_CLK1               0x014 0x274 0x000 0x6 0x0
+#define MX8MP_IOMUXC_GPIO1_IO00__SJC_FAIL                            0x014 0x274 0x000 0x7 0x0
+#define MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01                          0x018 0x278 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO01__PWM1_OUT                            0x018 0x278 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO01__MEDIAMIX_ISP_SHUTTER_TRIG_0         0x018 0x278 0x5DC 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO01__ANAMIX_REF_CLK_24M                  0x018 0x278 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO01__CCMSRCGPCMIX_EXT_CLK2               0x018 0x278 0x000 0x6 0x0
+#define MX8MP_IOMUXC_GPIO1_IO01__SJC_ACTIVE                          0x018 0x278 0x000 0x7 0x0
+#define MX8MP_IOMUXC_GPIO1_IO02__GPIO1_IO02                          0x01C 0x27C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B                        0x01C 0x27C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO02__MEDIAMIX_ISP_FLASH_TRIG_0           0x01C 0x27C 0x000 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_ANY                      0x01C 0x27C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO02__SJC_DE_B                            0x01C 0x27C 0x000 0x7 0x0
+#define MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03                          0x020 0x280 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO03__USDHC1_VSELECT                      0x020 0x280 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO03__MEDIAMIX_ISP_PRELIGHT_TRIG_0        0x020 0x280 0x000 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO03__SDMA1_EXT_EVENT00                   0x020 0x280 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO03__ANAMIX_XTAL_OK                      0x020 0x280 0x000 0x6 0x0
+#define MX8MP_IOMUXC_GPIO1_IO03__SJC_DONE                            0x020 0x280 0x000 0x7 0x0
+#define MX8MP_IOMUXC_GPIO1_IO04__GPIO1_IO04                          0x024 0x284 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT                      0x024 0x284 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO04__MEDIAMIX_ISP_SHUTTER_OPEN_0         0x024 0x284 0x000 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO04__SDMA1_EXT_EVENT01                   0x024 0x284 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO04__ANAMIX_XTAL_OK_LV                   0x024 0x284 0x000 0x6 0x0
+#define MX8MP_IOMUXC_GPIO1_IO04__USDHC1_TEST_TRIG                    0x024 0x284 0x000 0x7 0x0
+#define MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05                          0x028 0x288 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO05__M7_NMI                              0x028 0x288 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO05__MEDIAMIX_ISP_FL_TRIG_1              0x028 0x288 0x5D8 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO05__CCMSRCGPCMIX_PMIC_READY             0x028 0x288 0x554 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO05__CCMSRCGPCMIX_INT_BOOT               0x028 0x288 0x000 0x6 0x0
+#define MX8MP_IOMUXC_GPIO1_IO05__USDHC2_TEST_TRIG                    0x028 0x288 0x000 0x7 0x0
+#define MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06                          0x02C 0x28C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO06__ENET_QOS_MDC                        0x02C 0x28C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO06__MEDIAMIX_ISP_SHUTTER_TRIG_1         0x02C 0x28C 0x5E0 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO06__USDHC1_CD_B                         0x02C 0x28C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO06__CCMSRCGPCMIX_EXT_CLK3               0x02C 0x28C 0x000 0x6 0x0
+#define MX8MP_IOMUXC_GPIO1_IO06__ECSPI1_TEST_TRIG                    0x02C 0x28C 0x000 0x7 0x0
+#define MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07                          0x030 0x290 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO07__ENET_QOS_MDIO                       0x030 0x290 0x590 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO07__MEDIAMIX_ISP_FLASH_TRIG_1           0x030 0x290 0x000 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO07__USDHC1_WP                           0x030 0x290 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO07__CCMSRCGPCMIX_EXT_CLK4               0x030 0x290 0x000 0x6 0x0
+#define MX8MP_IOMUXC_GPIO1_IO07__ECSPI2_TEST_TRIG                    0x030 0x290 0x000 0x7 0x0
+#define MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08                          0x034 0x294 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO08__ENET_QOS_1588_EVENT0_IN             0x034 0x294 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO08__PWM1_OUT                            0x034 0x294 0x000 0x2 0x0
+#define MX8MP_IOMUXC_GPIO1_IO08__MEDIAMIX_ISP_PRELIGHT_TRIG_1        0x034 0x294 0x000 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO08__ENET_QOS_1588_EVENT0_AUX_IN         0x034 0x294 0x000 0x4 0x0
+#define MX8MP_IOMUXC_GPIO1_IO08__USDHC2_RESET_B                      0x034 0x294 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO08__CCMSRCGPCMIX_WAIT                   0x034 0x294 0x000 0x6 0x0
+#define MX8MP_IOMUXC_GPIO1_IO08__FLEXSPI_TEST_TRIG                   0x034 0x294 0x000 0x7 0x0
+#define MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09                          0x038 0x298 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO09__ENET_QOS_1588_EVENT0_OUT            0x038 0x298 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO09__PWM2_OUT                            0x038 0x298 0x000 0x2 0x0
+#define MX8MP_IOMUXC_GPIO1_IO09__MEDIAMIX_ISP_SHUTTER_OPEN_1         0x038 0x298 0x000 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO09__USDHC3_RESET_B                      0x038 0x298 0x000 0x4 0x0
+#define MX8MP_IOMUXC_GPIO1_IO09__AUDIOMIX_EXT_EVENT00                0x038 0x298 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO09__CCMSRCGPCMIX_STOP                   0x038 0x298 0x000 0x6 0x0
+#define MX8MP_IOMUXC_GPIO1_IO09__RAWNAND_TEST_TRIG                   0x038 0x298 0x000 0x7 0x0
+#define MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10                          0x03C 0x29C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO10__HSIOMIX_usb1_OTG_ID                 0x03C 0x29C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO10__PWM3_OUT                            0x03C 0x29C 0x000 0x2 0x0
+#define MX8MP_IOMUXC_GPIO1_IO10__OCOTP_FUSE_LATCHED                  0x03C 0x29C 0x000 0x7 0x0
+#define MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11                          0x040 0x2A0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO11__HSIOMIX_usb2_OTG_ID                 0x040 0x2A0 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO11__PWM2_OUT                            0x040 0x2A0 0x000 0x2 0x0
+#define MX8MP_IOMUXC_GPIO1_IO11__USDHC3_VSELECT                      0x040 0x2A0 0x000 0x4 0x0
+#define MX8MP_IOMUXC_GPIO1_IO11__CCMSRCGPCMIX_PMIC_READY             0x040 0x2A0 0x554 0x5 0x1
+#define MX8MP_IOMUXC_GPIO1_IO11__CCMSRCGPCMIX_OUT0                   0x040 0x2A0 0x000 0x6 0x0
+#define MX8MP_IOMUXC_GPIO1_IO11__CAAM_RNG_OSC_OBS                    0x040 0x2A0 0x000 0x7 0x0
+#define MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12                          0x044 0x2A4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO12__HSIOMIX_usb1_OTG_PWR                0x044 0x2A4 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO12__AUDIOMIX_EXT_EVENT01                0x044 0x2A4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO12__CCMSRCGPCMIX_OUT1                   0x044 0x2A4 0x000 0x6 0x0
+#define MX8MP_IOMUXC_GPIO1_IO12__CSU_CSU_ALARM_AUT00                 0x044 0x2A4 0x000 0x7 0x0
+#define MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13                          0x048 0x2A8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO13__HSIOMIX_usb1_OTG_OC                 0x048 0x2A8 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO13__PWM2_OUT                            0x048 0x2A8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO13__CCMSRCGPCMIX_OUT2                   0x048 0x2A8 0x000 0x6 0x0
+#define MX8MP_IOMUXC_GPIO1_IO13__CSU_CSU_ALARM_AUT01                 0x048 0x2A8 0x000 0x7 0x0
+#define MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14                          0x04C 0x2AC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO14__HSIOMIX_usb2_OTG_PWR                0x04C 0x2AC 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO14__USDHC3_CD_B                         0x04C 0x2AC 0x608 0x4 0x0
+#define MX8MP_IOMUXC_GPIO1_IO14__PWM3_OUT                            0x04C 0x2AC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO14__CCMSRCGPCMIX_CLKO1                  0x04C 0x2AC 0x000 0x6 0x0
+#define MX8MP_IOMUXC_GPIO1_IO14__CSU_CSU_ALARM_AUT02                 0x04C 0x2AC 0x000 0x7 0x0
+#define MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15                          0x050 0x2B0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO15__HSIOMIX_usb2_OTG_OC                 0x050 0x2B0 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO15__USDHC3_WP                           0x050 0x2B0 0x634 0x4 0x0
+#define MX8MP_IOMUXC_GPIO1_IO15__PWM4_OUT                            0x050 0x2B0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO15__CCMSRCGPCMIX_CLKO2                  0x050 0x2B0 0x000 0x6 0x0
+#define MX8MP_IOMUXC_GPIO1_IO15__CSU_CSU_INT_DEB                     0x050 0x2B0 0x000 0x7 0x0
+#define MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC                          0x054 0x2B4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_MDC__AUDIOMIX_SAI6_TX_DATA00               0x054 0x2B4 0x000 0x2 0x0
+#define MX8MP_IOMUXC_ENET_MDC__GPIO1_IO16                            0x054 0x2B4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_MDC__USDHC3_STROBE                         0x054 0x2B4 0x630 0x6 0x0
+#define MX8MP_IOMUXC_ENET_MDC__SIM_M_HADDR15                         0x054 0x2B4 0x000 0x7 0x0
+#define MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO                        0x058 0x2B8 0x590 0x0 0x1
+#define MX8MP_IOMUXC_ENET_MDIO__AUDIOMIX_SAI6_TX_SYNC                0x058 0x2B8 0x528 0x2 0x0
+#define MX8MP_IOMUXC_ENET_MDIO__GPIO1_IO17                           0x058 0x2B8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_MDIO__USDHC3_DATA5                         0x058 0x2B8 0x624 0x6 0x0
+#define MX8MP_IOMUXC_ENET_MDIO__SIM_M_HADDR16                        0x058 0x2B8 0x000 0x7 0x0
+#define MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3                    0x05C 0x2BC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_TD3__AUDIOMIX_SAI6_TX_BCLK                 0x05C 0x2BC 0x524 0x2 0x0
+#define MX8MP_IOMUXC_ENET_TD3__GPIO1_IO18                            0x05C 0x2BC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_TD3__USDHC3_DATA6                          0x05C 0x2BC 0x628 0x6 0x0
+#define MX8MP_IOMUXC_ENET_TD3__SIM_M_HADDR17                         0x05C 0x2BC 0x000 0x7 0x0
+#define MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2                    0x060 0x2C0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_TD2__CCM_ENET_QOS_CLOCK_GENERATE_REF_CLK   0x060 0x2C0 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ENET_TD2__AUDIOMIX_SAI6_RX_DATA00               0x060 0x2C0 0x51C 0x2 0x0
+#define MX8MP_IOMUXC_ENET_TD2__GPIO1_IO19                            0x060 0x2C0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_TD2__USDHC3_DATA7                          0x060 0x2C0 0x62C 0x6 0x0
+#define MX8MP_IOMUXC_ENET_TD2__SIM_M_HADDR18                         0x060 0x2C0 0x000 0x7 0x0
+#define MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1                    0x064 0x2C4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_TD1__AUDIOMIX_SAI6_RX_SYNC                 0x064 0x2C4 0x520 0x2 0x0
+#define MX8MP_IOMUXC_ENET_TD1__GPIO1_IO20                            0x064 0x2C4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_TD1__USDHC3_CD_B                           0x064 0x2C4 0x608 0x6 0x1
+#define MX8MP_IOMUXC_ENET_TD1__SIM_M_HADDR19                         0x064 0x2C4 0x000 0x7 0x0
+#define MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0                    0x068 0x2C8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_TD0__AUDIOMIX_SAI6_RX_BCLK                 0x068 0x2C8 0x518 0x2 0x0
+#define MX8MP_IOMUXC_ENET_TD0__GPIO1_IO21                            0x068 0x2C8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_TD0__USDHC3_WP                             0x068 0x2C8 0x634 0x6 0x1
+#define MX8MP_IOMUXC_ENET_TD0__SIM_M_HADDR20                         0x068 0x2C8 0x000 0x7 0x0
+#define MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL              0x06C 0x2CC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_TX_CTL__AUDIOMIX_SAI6_MCLK                 0x06C 0x2CC 0x514 0x2 0x0
+#define MX8MP_IOMUXC_ENET_TX_CTL__AUDIOMIX_SPDIF_OUT                 0x06C 0x2CC 0x000 0x3 0x0
+#define MX8MP_IOMUXC_ENET_TX_CTL__GPIO1_IO22                         0x06C 0x2CC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_TX_CTL__USDHC3_DATA0                       0x06C 0x2CC 0x610 0x6 0x0
+#define MX8MP_IOMUXC_ENET_TX_CTL__SIM_M_HADDR21                      0x06C 0x2CC 0x000 0x7 0x0
+#define MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK    0x070 0x2D0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_TXC__ENET_QOS_TX_ER                        0x070 0x2D0 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ENET_TXC__AUDIOMIX_SAI7_TX_DATA00               0x070 0x2D0 0x000 0x2 0x0
+#define MX8MP_IOMUXC_ENET_TXC__GPIO1_IO23                            0x070 0x2D0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_TXC__USDHC3_DATA1                          0x070 0x2D0 0x614 0x6 0x0
+#define MX8MP_IOMUXC_ENET_TXC__SIM_M_HADDR22                         0x070 0x2D0 0x000 0x7 0x0
+#define MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL              0x074 0x2D4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_RX_CTL__AUDIOMIX_SAI7_TX_SYNC              0x074 0x2D4 0x540 0x2 0x0
+#define MX8MP_IOMUXC_ENET_RX_CTL__AUDIOMIX_BIT_STREAM03              0x074 0x2D4 0x4CC 0x3 0x0
+#define MX8MP_IOMUXC_ENET_RX_CTL__GPIO1_IO24                         0x074 0x2D4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_RX_CTL__USDHC3_DATA2                       0x074 0x2D4 0x618 0x6 0x0
+#define MX8MP_IOMUXC_ENET_RX_CTL__SIM_M_HADDR23                      0x074 0x2D4 0x000 0x7 0x0
+#define MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK    0x078 0x2D8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_RXC__ENET_QOS_RX_ER                        0x078 0x2D8 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ENET_RXC__AUDIOMIX_SAI7_TX_BCLK                 0x078 0x2D8 0x53C 0x2 0x0
+#define MX8MP_IOMUXC_ENET_RXC__AUDIOMIX_BIT_STREAM02                 0x078 0x2D8 0x4C8 0x3 0x0
+#define MX8MP_IOMUXC_ENET_RXC__GPIO1_IO25                            0x078 0x2D8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_RXC__USDHC3_DATA3                          0x078 0x2D8 0x61C 0x6 0x0
+#define MX8MP_IOMUXC_ENET_RXC__SIM_M_HADDR24                         0x078 0x2D8 0x000 0x7 0x0
+#define MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0                    0x07C 0x2DC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_RD0__AUDIOMIX_SAI7_RX_DATA00               0x07C 0x2DC 0x534 0x2 0x0
+#define MX8MP_IOMUXC_ENET_RD0__AUDIOMIX_BIT_STREAM01                 0x07C 0x2DC 0x4C4 0x3 0x0
+#define MX8MP_IOMUXC_ENET_RD0__GPIO1_IO26                            0x07C 0x2DC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_RD0__USDHC3_DATA4                          0x07C 0x2DC 0x620 0x6 0x0
+#define MX8MP_IOMUXC_ENET_RD0__SIM_M_HADDR25                         0x07C 0x2DC 0x000 0x7 0x0
+#define MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1                    0x080 0x2E0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_RD1__AUDIOMIX_SAI7_RX_SYNC                 0x080 0x2E0 0x538 0x2 0x0
+#define MX8MP_IOMUXC_ENET_RD1__AUDIOMIX_BIT_STREAM00                 0x080 0x2E0 0x4C0 0x3 0x0
+#define MX8MP_IOMUXC_ENET_RD1__GPIO1_IO27                            0x080 0x2E0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_RD1__USDHC3_RESET_B                        0x080 0x2E0 0x000 0x6 0x0
+#define MX8MP_IOMUXC_ENET_RD1__SIM_M_HADDR26                         0x080 0x2E0 0x000 0x7 0x0
+#define MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2                    0x084 0x2E4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_RD2__AUDIOMIX_SAI7_RX_BCLK                 0x084 0x2E4 0x530 0x2 0x0
+#define MX8MP_IOMUXC_ENET_RD2__AUDIOMIX_CLK                          0x084 0x2E4 0x000 0x3 0x0
+#define MX8MP_IOMUXC_ENET_RD2__GPIO1_IO28                            0x084 0x2E4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_RD2__USDHC3_CLK                            0x084 0x2E4 0x604 0x6 0x0
+#define MX8MP_IOMUXC_ENET_RD2__SIM_M_HADDR27                         0x084 0x2E4 0x000 0x7 0x0
+#define MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3                    0x088 0x2E8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_RD3__AUDIOMIX_SAI7_MCLK                    0x088 0x2E8 0x52C 0x2 0x0
+#define MX8MP_IOMUXC_ENET_RD3__AUDIOMIX_SPDIF_IN                     0x088 0x2E8 0x544 0x3 0x0
+#define MX8MP_IOMUXC_ENET_RD3__GPIO1_IO29                            0x088 0x2E8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_RD3__USDHC3_CMD                            0x088 0x2E8 0x60C 0x6 0x0
+#define MX8MP_IOMUXC_ENET_RD3__SIM_M_HADDR28                         0x088 0x2E8 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK                             0x08C 0x2EC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_CLK__ENET1_MDC                              0x08C 0x2EC 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SD1_CLK__I2C5_SCL                               0x08C 0x2EC 0x5C4 0x3 0x0
+#define MX8MP_IOMUXC_SD1_CLK__UART1_DCE_TX                           0x08C 0x2EC 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_CLK__UART1_DTE_RX                           0x08C 0x2EC 0x5E8 0x4 0x0
+#define MX8MP_IOMUXC_SD1_CLK__GPIO2_IO00                             0x08C 0x2EC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_CLK__SIM_M_HADDR29                          0x08C 0x2EC 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD                             0x090 0x2F0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_CMD__ENET1_MDIO                             0x090 0x2F0 0x57C 0x1 0x0
+#define MX8MP_IOMUXC_SD1_CMD__I2C5_SDA                               0x090 0x2F0 0x5C8 0x3 0x0
+#define MX8MP_IOMUXC_SD1_CMD__UART1_DCE_RX                           0x090 0x2F0 0x5E8 0x4 0x1
+#define MX8MP_IOMUXC_SD1_CMD__UART1_DTE_TX                           0x090 0x2F0 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_CMD__GPIO2_IO01                             0x090 0x2F0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_CMD__SIM_M_HADDR30                          0x090 0x2F0 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0                         0x094 0x2F4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_DATA0__ENET1_RGMII_TD1                      0x094 0x2F4 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SD1_DATA0__I2C6_SCL                             0x094 0x2F4 0x5CC 0x3 0x0
+#define MX8MP_IOMUXC_SD1_DATA0__UART1_DCE_RTS                        0x094 0x2F4 0x5E4 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA0__UART1_DTE_CTS                        0x094 0x2F4 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA0__GPIO2_IO02                           0x094 0x2F4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_DATA0__SIM_M_HADDR31                        0x094 0x2F4 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1                         0x098 0x2F8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_DATA1__ENET1_RGMII_TD0                      0x098 0x2F8 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SD1_DATA1__I2C6_SDA                             0x098 0x2F8 0x5D0 0x3 0x0
+#define MX8MP_IOMUXC_SD1_DATA1__UART1_DCE_CTS                        0x098 0x2F8 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA1__UART1_DTE_RTS                        0x098 0x2F8 0x5E4 0x4 0x1
+#define MX8MP_IOMUXC_SD1_DATA1__GPIO2_IO03                           0x098 0x2F8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_DATA1__SIM_M_HBURST00                       0x098 0x2F8 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2                         0x09C 0x2FC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_DATA2__ENET1_RGMII_RD0                      0x09C 0x2FC 0x580 0x1 0x0
+#define MX8MP_IOMUXC_SD1_DATA2__I2C4_SCL                             0x09C 0x2FC 0x5BC 0x3 0x0
+#define MX8MP_IOMUXC_SD1_DATA2__UART2_DCE_TX                         0x09C 0x2FC 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA2__UART2_DTE_RX                         0x09C 0x2FC 0x5F0 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA2__GPIO2_IO04                           0x09C 0x2FC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_DATA2__SIM_M_HBURST01                       0x09C 0x2FC 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3                         0x0A0 0x300 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_DATA3__ENET1_RGMII_RD1                      0x0A0 0x300 0x584 0x1 0x0
+#define MX8MP_IOMUXC_SD1_DATA3__I2C4_SDA                             0x0A0 0x300 0x5C0 0x3 0x0
+#define MX8MP_IOMUXC_SD1_DATA3__UART2_DCE_RX                         0x0A0 0x300 0x5F0 0x4 0x1
+#define MX8MP_IOMUXC_SD1_DATA3__UART2_DTE_TX                         0x0A0 0x300 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA3__GPIO2_IO05                           0x0A0 0x300 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_DATA3__SIM_M_HBURST02                       0x0A0 0x300 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SD1_DATA4__USDHC1_DATA4                         0x0A4 0x304 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_DATA4__ENET1_RGMII_TX_CTL                   0x0A4 0x304 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SD1_DATA4__I2C1_SCL                             0x0A4 0x304 0x5A4 0x3 0x0
+#define MX8MP_IOMUXC_SD1_DATA4__UART2_DCE_RTS                        0x0A4 0x304 0x5EC 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA4__UART2_DTE_CTS                        0x0A4 0x304 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06                           0x0A4 0x304 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_DATA4__SIM_M_HRESP                          0x0A4 0x304 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SD1_DATA5__USDHC1_DATA5                         0x0A8 0x308 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_DATA5__ENET1_TX_ER                          0x0A8 0x308 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SD1_DATA5__I2C1_SDA                             0x0A8 0x308 0x5A8 0x3 0x0
+#define MX8MP_IOMUXC_SD1_DATA5__UART2_DCE_CTS                        0x0A8 0x308 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA5__UART2_DTE_RTS                        0x0A8 0x308 0x5EC 0x4 0x1
+#define MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07                           0x0A8 0x308 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_DATA5__TPSMP_HDATA05                        0x0A8 0x308 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SD1_DATA6__USDHC1_DATA6                         0x0AC 0x30C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_DATA6__ENET1_RGMII_RX_CTL                   0x0AC 0x30C 0x588 0x1 0x0
+#define MX8MP_IOMUXC_SD1_DATA6__I2C2_SCL                             0x0AC 0x30C 0x5AC 0x3 0x0
+#define MX8MP_IOMUXC_SD1_DATA6__UART3_DCE_TX                         0x0AC 0x30C 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA6__UART3_DTE_RX                         0x0AC 0x30C 0x5F8 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA6__GPIO2_IO08                           0x0AC 0x30C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_DATA6__TPSMP_HDATA06                        0x0AC 0x30C 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SD1_DATA7__USDHC1_DATA7                         0x0B0 0x310 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_DATA7__ENET1_RX_ER                          0x0B0 0x310 0x58C 0x1 0x0
+#define MX8MP_IOMUXC_SD1_DATA7__I2C2_SDA                             0x0B0 0x310 0x5B0 0x3 0x0
+#define MX8MP_IOMUXC_SD1_DATA7__UART3_DCE_RX                         0x0B0 0x310 0x5F8 0x4 0x1
+#define MX8MP_IOMUXC_SD1_DATA7__UART3_DTE_TX                         0x0B0 0x310 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09                           0x0B0 0x310 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_DATA7__TPSMP_HDATA07                        0x0B0 0x310 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SD1_RESET_B__USDHC1_RESET_B                     0x0B4 0x314 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_RESET_B__ENET1_TX_CLK                       0x0B4 0x314 0x578 0x1 0x0
+#define MX8MP_IOMUXC_SD1_RESET_B__I2C3_SCL                           0x0B4 0x314 0x5B4 0x3 0x0
+#define MX8MP_IOMUXC_SD1_RESET_B__UART3_DCE_RTS                      0x0B4 0x314 0x5F4 0x4 0x0
+#define MX8MP_IOMUXC_SD1_RESET_B__UART3_DTE_CTS                      0x0B4 0x314 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10                         0x0B4 0x314 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_RESET_B__ECSPI3_TEST_TRIG                   0x0B4 0x314 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SD1_STROBE__USDHC1_STROBE                       0x0B8 0x318 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_STROBE__I2C3_SDA                            0x0B8 0x318 0x5B8 0x3 0x0
+#define MX8MP_IOMUXC_SD1_STROBE__UART3_DCE_CTS                       0x0B8 0x318 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_STROBE__UART3_DTE_RTS                       0x0B8 0x318 0x5F4 0x4 0x1
+#define MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11                          0x0B8 0x318 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_STROBE__USDHC3_TEST_TRIG                    0x0B8 0x318 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B                           0x0BC 0x31C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12                            0x0BC 0x31C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_CD_B__CCMSRCGPCMIX_TESTER_ACK               0x0BC 0x31C 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK                             0x0C0 0x320 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD2_CLK__ECSPI2_SCLK                            0x0C0 0x320 0x568 0x2 0x0
+#define MX8MP_IOMUXC_SD2_CLK__UART4_DCE_RX                           0x0C0 0x320 0x600 0x3 0x0
+#define MX8MP_IOMUXC_SD2_CLK__UART4_DTE_TX                           0x0C0 0x320 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SD2_CLK__GPIO2_IO13                             0x0C0 0x320 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_CLK__CCMSRCGPCMIX_OBSERVE0                  0x0C0 0x320 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SD2_CLK__OBSERVE_MUX_OUT00                      0x0C0 0x320 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD                             0x0C4 0x324 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD2_CMD__ECSPI2_MOSI                            0x0C4 0x324 0x570 0x2 0x0
+#define MX8MP_IOMUXC_SD2_CMD__UART4_DCE_TX                           0x0C4 0x324 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SD2_CMD__UART4_DTE_RX                           0x0C4 0x324 0x600 0x3 0x1
+#define MX8MP_IOMUXC_SD2_CMD__AUDIOMIX_CLK                           0x0C4 0x324 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD2_CMD__GPIO2_IO14                             0x0C4 0x324 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_CMD__CCMSRCGPCMIX_OBSERVE1                  0x0C4 0x324 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SD2_CMD__OBSERVE_MUX_OUT01                      0x0C4 0x324 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0                         0x0C8 0x328 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD2_DATA0__I2C4_SDA                             0x0C8 0x328 0x5C0 0x2 0x1
+#define MX8MP_IOMUXC_SD2_DATA0__UART2_DCE_RX                         0x0C8 0x328 0x5F0 0x3 0x2
+#define MX8MP_IOMUXC_SD2_DATA0__UART2_DTE_TX                         0x0C8 0x328 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SD2_DATA0__AUDIOMIX_BIT_STREAM00                0x0C8 0x328 0x4C0 0x4 0x1
+#define MX8MP_IOMUXC_SD2_DATA0__GPIO2_IO15                           0x0C8 0x328 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_DATA0__CCMSRCGPCMIX_OBSERVE2                0x0C8 0x328 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SD2_DATA0__OBSERVE_MUX_OUT02                    0x0C8 0x328 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1                         0x0CC 0x32C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD2_DATA1__I2C4_SCL                             0x0CC 0x32C 0x5BC 0x2 0x1
+#define MX8MP_IOMUXC_SD2_DATA1__UART2_DCE_TX                         0x0CC 0x32C 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SD2_DATA1__UART2_DTE_RX                         0x0CC 0x32C 0x5F0 0x3 0x3
+#define MX8MP_IOMUXC_SD2_DATA1__AUDIOMIX_BIT_STREAM01                0x0CC 0x32C 0x4C4 0x4 0x1
+#define MX8MP_IOMUXC_SD2_DATA1__GPIO2_IO16                           0x0CC 0x32C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_DATA1__CCMSRCGPCMIX_WAIT                    0x0CC 0x32C 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SD2_DATA1__OBSERVE_MUX_OUT03                    0x0CC 0x32C 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2                         0x0D0 0x330 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD2_DATA2__ECSPI2_SS0                           0x0D0 0x330 0x574 0x2 0x0
+#define MX8MP_IOMUXC_SD2_DATA2__AUDIOMIX_SPDIF_OUT                   0x0D0 0x330 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SD2_DATA2__AUDIOMIX_BIT_STREAM02                0x0D0 0x330 0x4C8 0x4 0x1
+#define MX8MP_IOMUXC_SD2_DATA2__GPIO2_IO17                           0x0D0 0x330 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_DATA2__CCMSRCGPCMIX_STOP                    0x0D0 0x330 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SD2_DATA2__OBSERVE_MUX_OUT04                    0x0D0 0x330 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3                         0x0D4 0x334 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD2_DATA3__ECSPI2_MISO                          0x0D4 0x334 0x56C 0x2 0x0
+#define MX8MP_IOMUXC_SD2_DATA3__AUDIOMIX_SPDIF_IN                    0x0D4 0x334 0x544 0x3 0x1
+#define MX8MP_IOMUXC_SD2_DATA3__AUDIOMIX_BIT_STREAM03                0x0D4 0x334 0x4CC 0x4 0x1
+#define MX8MP_IOMUXC_SD2_DATA3__GPIO2_IO18                           0x0D4 0x334 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_DATA3__CCMSRCGPCMIX_EARLY_RESET             0x0D4 0x334 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SD2_RESET_B__USDHC2_RESET_B                     0x0D8 0x338 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19                         0x0D8 0x338 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_RESET_B__CCMSRCGPCMIX_SYSTEM_RESET          0x0D8 0x338 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SD2_WP__USDHC2_WP                               0x0DC 0x33C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD2_WP__GPIO2_IO20                              0x0DC 0x33C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_WP__CORESIGHT_EVENTI                        0x0DC 0x33C 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SD2_WP__SIM_M_HMASTLOCK                         0x0DC 0x33C 0x000 0x7 0x0
+#define MX8MP_IOMUXC_NAND_ALE__RAWNAND_ALE                           0x0E0 0x340 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK                        0x0E0 0x340 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_ALE__AUDIOMIX_SAI3_TX_BCLK                 0x0E0 0x340 0x4E8 0x2 0x0
+#define MX8MP_IOMUXC_NAND_ALE__MEDIAMIX_ISP_FL_TRIG_0                0x0E0 0x340 0x5D4 0x3 0x1
+#define MX8MP_IOMUXC_NAND_ALE__UART3_DCE_RX                          0x0E0 0x340 0x5F8 0x4 0x2
+#define MX8MP_IOMUXC_NAND_ALE__UART3_DTE_TX                          0x0E0 0x340 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00                            0x0E0 0x340 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_ALE__CORESIGHT_TRACE_CLK                   0x0E0 0x340 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_ALE__SIM_M_HPROT00                         0x0E0 0x340 0x000 0x7 0x0
+#define MX8MP_IOMUXC_NAND_CE0_B__RAWNAND_CE0_B                       0x0E4 0x344 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B                     0x0E4 0x344 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_CE0_B__AUDIOMIX_SAI3_TX_DATA00             0x0E4 0x344 0x000 0x2 0x0
+#define MX8MP_IOMUXC_NAND_CE0_B__MEDIAMIX_ISP_SHUTTER_TRIG_0         0x0E4 0x344 0x5DC 0x3 0x1
+#define MX8MP_IOMUXC_NAND_CE0_B__UART3_DCE_TX                        0x0E4 0x344 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_CE0_B__UART3_DTE_RX                        0x0E4 0x344 0x5F8 0x4 0x3
+#define MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01                          0x0E4 0x344 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_CE0_B__CORESIGHT_TRACE_CTL                 0x0E4 0x344 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_CE0_B__SIM_M_HPROT01                       0x0E4 0x344 0x000 0x7 0x0
+#define MX8MP_IOMUXC_NAND_CE1_B__RAWNAND_CE1_B                       0x0E8 0x348 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_CE1_B__FLEXSPI_A_SS1_B                     0x0E8 0x348 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE                       0x0E8 0x348 0x630 0x2 0x1
+#define MX8MP_IOMUXC_NAND_CE1_B__I2C4_SCL                            0x0E8 0x348 0x5BC 0x4 0x2
+#define MX8MP_IOMUXC_NAND_CE1_B__GPIO3_IO02                          0x0E8 0x348 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_CE1_B__CORESIGHT_TRACE00                   0x0E8 0x348 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_CE1_B__SIM_M_HPROT02                       0x0E8 0x348 0x000 0x7 0x0
+#define MX8MP_IOMUXC_NAND_CE2_B__RAWNAND_CE2_B                       0x0EC 0x34C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_CE2_B__FLEXSPI_B_SS0_B                     0x0EC 0x34C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5                        0x0EC 0x34C 0x624 0x2 0x1
+#define MX8MP_IOMUXC_NAND_CE2_B__I2C4_SDA                            0x0EC 0x34C 0x5C0 0x4 0x2
+#define MX8MP_IOMUXC_NAND_CE2_B__GPIO3_IO03                          0x0EC 0x34C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_CE2_B__CORESIGHT_TRACE01                   0x0EC 0x34C 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_CE2_B__SIM_M_HPROT03                       0x0EC 0x34C 0x000 0x7 0x0
+#define MX8MP_IOMUXC_NAND_CE3_B__RAWNAND_CE3_B                       0x0F0 0x350 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_CE3_B__FLEXSPI_B_SS1_B                     0x0F0 0x350 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6                        0x0F0 0x350 0x628 0x2 0x1
+#define MX8MP_IOMUXC_NAND_CE3_B__I2C3_SDA                            0x0F0 0x350 0x5B8 0x4 0x1
+#define MX8MP_IOMUXC_NAND_CE3_B__GPIO3_IO04                          0x0F0 0x350 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_CE3_B__CORESIGHT_TRACE02                   0x0F0 0x350 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_CE3_B__SIM_M_HADDR00                       0x0F0 0x350 0x000 0x7 0x0
+#define MX8MP_IOMUXC_NAND_CLE__RAWNAND_CLE                           0x0F4 0x354 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_CLE__FLEXSPI_B_SCLK                        0x0F4 0x354 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7                          0x0F4 0x354 0x62C 0x2 0x1
+#define MX8MP_IOMUXC_NAND_CLE__UART4_DCE_RX                          0x0F4 0x354 0x600 0x4 0x2
+#define MX8MP_IOMUXC_NAND_CLE__UART4_DTE_TX                          0x0F4 0x354 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_CLE__GPIO3_IO05                            0x0F4 0x354 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_CLE__CORESIGHT_TRACE03                     0x0F4 0x354 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_CLE__SIM_M_HADDR01                         0x0F4 0x354 0x000 0x7 0x0
+#define MX8MP_IOMUXC_NAND_DATA00__RAWNAND_DATA00                     0x0F8 0x358 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00                   0x0F8 0x358 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_DATA00__AUDIOMIX_SAI3_RX_DATA00            0x0F8 0x358 0x4E4 0x2 0x0
+#define MX8MP_IOMUXC_NAND_DATA00__MEDIAMIX_ISP_FLASH_TRIG_0          0x0F8 0x358 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DATA00__UART4_DCE_RX                       0x0F8 0x358 0x600 0x4 0x3
+#define MX8MP_IOMUXC_NAND_DATA00__UART4_DTE_TX                       0x0F8 0x358 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06                         0x0F8 0x358 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_DATA00__CORESIGHT_TRACE04                  0x0F8 0x358 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_DATA00__SIM_M_HADDR02                      0x0F8 0x358 0x000 0x7 0x0
+#define MX8MP_IOMUXC_NAND_DATA01__RAWNAND_DATA01                     0x0FC 0x35C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01                   0x0FC 0x35C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_DATA01__AUDIOMIX_SAI3_TX_SYNC              0x0FC 0x35C 0x4EC 0x2 0x0
+#define MX8MP_IOMUXC_NAND_DATA01__MEDIAMIX_ISP_PRELIGHT_TRIG_0       0x0FC 0x35C 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DATA01__UART4_DCE_TX                       0x0FC 0x35C 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_DATA01__UART4_DTE_RX                       0x0FC 0x35C 0x600 0x4 0x4
+#define MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07                         0x0FC 0x35C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_DATA01__CORESIGHT_TRACE05                  0x0FC 0x35C 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_DATA01__SIM_M_HADDR03                      0x0FC 0x35C 0x000 0x7 0x0
+#define MX8MP_IOMUXC_NAND_DATA02__RAWNAND_DATA02                     0x100 0x360 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02                   0x100 0x360 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_DATA02__USDHC3_CD_B                        0x100 0x360 0x608 0x2 0x2
+#define MX8MP_IOMUXC_NAND_DATA02__UART4_DCE_CTS                      0x100 0x360 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DATA02__UART4_DTE_RTS                      0x100 0x360 0x5FC 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DATA02__I2C4_SDA                           0x100 0x360 0x5C0 0x4 0x3
+#define MX8MP_IOMUXC_NAND_DATA02__GPIO3_IO08                         0x100 0x360 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_DATA02__CORESIGHT_TRACE06                  0x100 0x360 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_DATA02__SIM_M_HADDR04                      0x100 0x360 0x000 0x7 0x0
+#define MX8MP_IOMUXC_NAND_DATA03__RAWNAND_DATA03                     0x104 0x364 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03                   0x104 0x364 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_DATA03__USDHC3_WP                          0x104 0x364 0x634 0x2 0x2
+#define MX8MP_IOMUXC_NAND_DATA03__UART4_DCE_RTS                      0x104 0x364 0x5FC 0x3 0x1
+#define MX8MP_IOMUXC_NAND_DATA03__UART4_DTE_CTS                      0x104 0x364 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DATA03__MEDIAMIX_ISP_FL_TRIG_1             0x104 0x364 0x5D8 0x4 0x1
+#define MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09                         0x104 0x364 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_DATA03__CORESIGHT_TRACE07                  0x104 0x364 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_DATA03__SIM_M_HADDR05                      0x104 0x364 0x000 0x7 0x0
+#define MX8MP_IOMUXC_NAND_DATA04__RAWNAND_DATA04                     0x108 0x368 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA04__FLEXSPI_B_DATA00                   0x108 0x368 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0                       0x108 0x368 0x610 0x2 0x1
+#define MX8MP_IOMUXC_NAND_DATA04__FLEXSPI_A_DATA04                   0x108 0x368 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DATA04__MEDIAMIX_ISP_SHUTTER_TRIG_1        0x108 0x368 0x5E0 0x4 0x1
+#define MX8MP_IOMUXC_NAND_DATA04__GPIO3_IO10                         0x108 0x368 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_DATA04__CORESIGHT_TRACE08                  0x108 0x368 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_DATA04__SIM_M_HADDR06                      0x108 0x368 0x000 0x7 0x0
+#define MX8MP_IOMUXC_NAND_DATA05__RAWNAND_DATA05                     0x10C 0x36C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA05__FLEXSPI_B_DATA01                   0x10C 0x36C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1                       0x10C 0x36C 0x614 0x2 0x1
+#define MX8MP_IOMUXC_NAND_DATA05__FLEXSPI_A_DATA05                   0x10C 0x36C 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DATA05__MEDIAMIX_ISP_FLASH_TRIG_1          0x10C 0x36C 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_DATA05__GPIO3_IO11                         0x10C 0x36C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_DATA05__CORESIGHT_TRACE09                  0x10C 0x36C 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_DATA05__SIM_M_HADDR07                      0x10C 0x36C 0x000 0x7 0x0
+#define MX8MP_IOMUXC_NAND_DATA06__RAWNAND_DATA06                     0x110 0x370 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA06__FLEXSPI_B_DATA02                   0x110 0x370 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2                       0x110 0x370 0x618 0x2 0x1
+#define MX8MP_IOMUXC_NAND_DATA06__FLEXSPI_A_DATA06                   0x110 0x370 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DATA06__MEDIAMIX_ISP_PRELIGHT_TRIG_1       0x110 0x370 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_DATA06__GPIO3_IO12                         0x110 0x370 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_DATA06__CORESIGHT_TRACE10                  0x110 0x370 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_DATA06__SIM_M_HADDR08                      0x110 0x370 0x000 0x7 0x0
+#define MX8MP_IOMUXC_NAND_DATA07__RAWNAND_DATA07                     0x114 0x374 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA07__FLEXSPI_B_DATA03                   0x114 0x374 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3                       0x114 0x374 0x61C 0x2 0x1
+#define MX8MP_IOMUXC_NAND_DATA07__FLEXSPI_A_DATA07                   0x114 0x374 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DATA07__MEDIAMIX_ISP_SHUTTER_OPEN_1        0x114 0x374 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_DATA07__GPIO3_IO13                         0x114 0x374 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_DATA07__CORESIGHT_TRACE11                  0x114 0x374 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_DATA07__SIM_M_HADDR09                      0x114 0x374 0x000 0x7 0x0
+#define MX8MP_IOMUXC_NAND_DQS__RAWNAND_DQS                           0x118 0x378 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DQS__FLEXSPI_A_DQS                         0x118 0x378 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_DQS__AUDIOMIX_SAI3_MCLK                    0x118 0x378 0x4E0 0x2 0x0
+#define MX8MP_IOMUXC_NAND_DQS__MEDIAMIX_ISP_SHUTTER_OPEN_0           0x118 0x378 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DQS__I2C3_SCL                              0x118 0x378 0x5B4 0x4 0x1
+#define MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14                            0x118 0x378 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_DQS__CORESIGHT_TRACE12                     0x118 0x378 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_DQS__SIM_M_HADDR10                         0x118 0x378 0x000 0x7 0x0
+#define MX8MP_IOMUXC_NAND_RE_B__RAWNAND_RE_B                         0x11C 0x37C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_RE_B__FLEXSPI_B_DQS                        0x11C 0x37C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4                         0x11C 0x37C 0x620 0x2 0x1
+#define MX8MP_IOMUXC_NAND_RE_B__UART4_DCE_TX                         0x11C 0x37C 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_RE_B__UART4_DTE_RX                         0x11C 0x37C 0x600 0x4 0x5
+#define MX8MP_IOMUXC_NAND_RE_B__GPIO3_IO15                           0x11C 0x37C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_RE_B__CORESIGHT_TRACE13                    0x11C 0x37C 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_RE_B__SIM_M_HADDR11                        0x11C 0x37C 0x000 0x7 0x0
+#define MX8MP_IOMUXC_NAND_READY_B__RAWNAND_READY_B                   0x120 0x380 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B                    0x120 0x380 0x000 0x2 0x0
+#define MX8MP_IOMUXC_NAND_READY_B__I2C3_SCL                          0x120 0x380 0x5B4 0x4 0x2
+#define MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16                        0x120 0x380 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_READY_B__CORESIGHT_TRACE14                 0x120 0x380 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_READY_B__SIM_M_HADDR12                     0x120 0x380 0x000 0x7 0x0
+#define MX8MP_IOMUXC_NAND_WE_B__RAWNAND_WE_B                         0x124 0x384 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK                           0x124 0x384 0x604 0x2 0x1
+#define MX8MP_IOMUXC_NAND_WE_B__I2C3_SDA                             0x124 0x384 0x5B8 0x4 0x2
+#define MX8MP_IOMUXC_NAND_WE_B__GPIO3_IO17                           0x124 0x384 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_WE_B__CORESIGHT_TRACE15                    0x124 0x384 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_WE_B__SIM_M_HADDR13                        0x124 0x384 0x000 0x7 0x0
+#define MX8MP_IOMUXC_NAND_WP_B__RAWNAND_WP_B                         0x128 0x388 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD                           0x128 0x388 0x60C 0x2 0x1
+#define MX8MP_IOMUXC_NAND_WP_B__I2C4_SCL                             0x128 0x388 0x5BC 0x4 0x3
+#define MX8MP_IOMUXC_NAND_WP_B__GPIO3_IO18                           0x128 0x388 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_WP_B__CORESIGHT_EVENTO                     0x128 0x388 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_WP_B__SIM_M_HADDR14                        0x128 0x388 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SAI5_RXFS__AUDIOMIX_SAI5_RX_SYNC                0x12C 0x38C 0x508 0x0 0x0
+#define MX8MP_IOMUXC_SAI5_RXFS__AUDIOMIX_SAI1_TX_DATA00              0x12C 0x38C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI5_RXFS__PWM4_OUT                             0x12C 0x38C 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI5_RXFS__I2C6_SCL                             0x12C 0x38C 0x5CC 0x3 0x1
+#define MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19                           0x12C 0x38C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI5_RXC__AUDIOMIX_SAI5_RX_BCLK                 0x130 0x390 0x4F4 0x0 0x0
+#define MX8MP_IOMUXC_SAI5_RXC__AUDIOMIX_SAI1_TX_DATA01               0x130 0x390 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI5_RXC__PWM3_OUT                              0x130 0x390 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI5_RXC__I2C6_SDA                              0x130 0x390 0x5D0 0x3 0x1
+#define MX8MP_IOMUXC_SAI5_RXC__AUDIOMIX_CLK                          0x130 0x390 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20                            0x130 0x390 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_SAI5_RX_DATA00              0x134 0x394 0x4F8 0x0 0x0
+#define MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_SAI1_TX_DATA02              0x134 0x394 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT                             0x134 0x394 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI5_RXD0__I2C5_SCL                             0x134 0x394 0x5C4 0x3 0x1
+#define MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_BIT_STREAM00                0x134 0x394 0x4C0 0x4 0x2
+#define MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21                           0x134 0x394 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI5_RX_DATA01              0x138 0x398 0x4FC 0x0 0x0
+#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI1_TX_DATA03              0x138 0x398 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI1_TX_SYNC                0x138 0x398 0x4D8 0x2 0x0
+#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI5_TX_SYNC                0x138 0x398 0x510 0x3 0x0
+#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_BIT_STREAM01                0x138 0x398 0x4C4 0x4 0x2
+#define MX8MP_IOMUXC_SAI5_RXD1__GPIO3_IO22                           0x138 0x398 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX                              0x138 0x398 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI5_RX_DATA02              0x13C 0x39C 0x500 0x0 0x0
+#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI1_TX_DATA04              0x13C 0x39C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI1_TX_SYNC                0x13C 0x39C 0x4D8 0x2 0x1
+#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI5_TX_BCLK                0x13C 0x39C 0x50C 0x3 0x0
+#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_BIT_STREAM02                0x13C 0x39C 0x4C8 0x4 0x2
+#define MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23                           0x13C 0x39C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX                              0x13C 0x39C 0x54C 0x6 0x0
+#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI5_RX_DATA03              0x140 0x3A0 0x504 0x0 0x0
+#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI1_TX_DATA05              0x140 0x3A0 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI1_TX_SYNC                0x140 0x3A0 0x4D8 0x2 0x2
+#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI5_TX_DATA00              0x140 0x3A0 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_BIT_STREAM03                0x140 0x3A0 0x4CC 0x4 0x2
+#define MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24                           0x140 0x3A0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX                              0x140 0x3A0 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SAI5_MCLK__AUDIOMIX_SAI5_MCLK                   0x144 0x3A4 0x4F0 0x0 0x0
+#define MX8MP_IOMUXC_SAI5_MCLK__AUDIOMIX_SAI1_TX_BCLK                0x144 0x3A4 0x4D4 0x1 0x0
+#define MX8MP_IOMUXC_SAI5_MCLK__PWM1_OUT                             0x144 0x3A4 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI5_MCLK__I2C5_SDA                             0x144 0x3A4 0x5C8 0x3 0x1
+#define MX8MP_IOMUXC_SAI5_MCLK__GPIO3_IO25                           0x144 0x3A4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX                              0x144 0x3A4 0x550 0x6 0x0
+#define MX8MP_IOMUXC_SAI1_RXFS__AUDIOMIX_SAI1_RX_SYNC                0x148 0x3A8 0x4D0 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXFS__AUDIOMIX_SAI5_RX_SYNC                0x148 0x3A8 0x508 0x1 0x1
+#define MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN                 0x148 0x3A8 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00                           0x148 0x3A8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_RXC__AUDIOMIX_SAI1_RX_BCLK                 0x14C 0x3AC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXC__AUDIOMIX_SAI5_RX_BCLK                 0x14C 0x3AC 0x4F4 0x1 0x1
+#define MX8MP_IOMUXC_SAI1_RXC__AUDIOMIX_CLK                          0x14C 0x3AC 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT                 0x14C 0x3AC 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01                            0x14C 0x3AC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI1_RX_DATA00              0x150 0x3B0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI5_RX_DATA00              0x150 0x3B0 0x4F8 0x1 0x1
+#define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI1_TX_DATA01              0x150 0x3B0 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_BIT_STREAM00                0x150 0x3B0 0x4C0 0x3 0x3
+#define MX8MP_IOMUXC_SAI1_RXD0__ENET1_1588_EVENT1_IN                 0x150 0x3B0 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02                           0x150 0x3B0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_RXD1__AUDIOMIX_SAI1_RX_DATA01              0x154 0x3B4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXD1__AUDIOMIX_SAI5_RX_DATA01              0x154 0x3B4 0x4FC 0x1 0x1
+#define MX8MP_IOMUXC_SAI1_RXD1__AUDIOMIX_BIT_STREAM01                0x154 0x3B4 0x4C4 0x3 0x3
+#define MX8MP_IOMUXC_SAI1_RXD1__ENET1_1588_EVENT1_OUT                0x154 0x3B4 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03                           0x154 0x3B4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_RXD2__AUDIOMIX_SAI1_RX_DATA02              0x158 0x3B8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXD2__AUDIOMIX_SAI5_RX_DATA02              0x158 0x3B8 0x500 0x1 0x1
+#define MX8MP_IOMUXC_SAI1_RXD2__AUDIOMIX_BIT_STREAM02                0x158 0x3B8 0x4C8 0x3 0x3
+#define MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC                            0x158 0x3B8 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_RXD2__GPIO4_IO04                           0x158 0x3B8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_RXD3__AUDIOMIX_SAI1_RX_DATA03              0x15C 0x3BC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXD3__AUDIOMIX_SAI5_RX_DATA03              0x15C 0x3BC 0x504 0x1 0x1
+#define MX8MP_IOMUXC_SAI1_RXD3__AUDIOMIX_BIT_STREAM03                0x15C 0x3BC 0x4CC 0x3 0x3
+#define MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO                           0x15C 0x3BC 0x57C 0x4 0x1
+#define MX8MP_IOMUXC_SAI1_RXD3__GPIO4_IO05                           0x15C 0x3BC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_RXD4__AUDIOMIX_SAI1_RX_DATA04              0x160 0x3C0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXD4__AUDIOMIX_SAI6_TX_BCLK                0x160 0x3C0 0x524 0x1 0x1
+#define MX8MP_IOMUXC_SAI1_RXD4__AUDIOMIX_SAI6_RX_BCLK                0x160 0x3C0 0x518 0x2 0x1
+#define MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0                      0x160 0x3C0 0x580 0x4 0x1
+#define MX8MP_IOMUXC_SAI1_RXD4__GPIO4_IO06                           0x160 0x3C0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_RXD5__AUDIOMIX_SAI1_RX_DATA05              0x164 0x3C4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXD5__AUDIOMIX_SAI6_TX_DATA00              0x164 0x3C4 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI1_RXD5__AUDIOMIX_SAI6_RX_DATA00              0x164 0x3C4 0x51C 0x2 0x1
+#define MX8MP_IOMUXC_SAI1_RXD5__AUDIOMIX_SAI1_RX_SYNC                0x164 0x3C4 0x4D0 0x3 0x1
+#define MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1                      0x164 0x3C4 0x584 0x4 0x1
+#define MX8MP_IOMUXC_SAI1_RXD5__GPIO4_IO07                           0x164 0x3C4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_RXD6__AUDIOMIX_SAI1_RX_DATA06              0x168 0x3C8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXD6__AUDIOMIX_SAI6_TX_SYNC                0x168 0x3C8 0x528 0x1 0x1
+#define MX8MP_IOMUXC_SAI1_RXD6__AUDIOMIX_SAI6_RX_SYNC                0x168 0x3C8 0x520 0x2 0x1
+#define MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2                      0x168 0x3C8 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_RXD6__GPIO4_IO08                           0x168 0x3C8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_RXD7__AUDIOMIX_SAI1_RX_DATA07              0x16C 0x3CC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXD7__AUDIOMIX_SAI6_MCLK                   0x16C 0x3CC 0x514 0x1 0x1
+#define MX8MP_IOMUXC_SAI1_RXD7__AUDIOMIX_SAI1_TX_SYNC                0x16C 0x3CC 0x4D8 0x2 0x3
+#define MX8MP_IOMUXC_SAI1_RXD7__AUDIOMIX_SAI1_TX_DATA04              0x16C 0x3CC 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3                      0x16C 0x3CC 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_RXD7__GPIO4_IO09                           0x16C 0x3CC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXFS__AUDIOMIX_SAI1_TX_SYNC                0x170 0x3D0 0x4D8 0x0 0x4
+#define MX8MP_IOMUXC_SAI1_TXFS__AUDIOMIX_SAI5_TX_SYNC                0x170 0x3D0 0x510 0x1 0x1
+#define MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL                   0x170 0x3D0 0x588 0x4 0x1
+#define MX8MP_IOMUXC_SAI1_TXFS__GPIO4_IO10                           0x170 0x3D0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXC__AUDIOMIX_SAI1_TX_BCLK                 0x174 0x3D4 0x4D4 0x0 0x1
+#define MX8MP_IOMUXC_SAI1_TXC__AUDIOMIX_SAI5_TX_BCLK                 0x174 0x3D4 0x50C 0x1 0x1
+#define MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC                       0x174 0x3D4 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_TXC__GPIO4_IO11                            0x174 0x3D4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXD0__AUDIOMIX_SAI1_TX_DATA00              0x178 0x3D8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_TXD0__AUDIOMIX_SAI5_TX_DATA00              0x178 0x3D8 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0                      0x178 0x3D8 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_TXD0__GPIO4_IO12                           0x178 0x3D8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXD1__AUDIOMIX_SAI1_TX_DATA01              0x17C 0x3DC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_TXD1__AUDIOMIX_SAI5_TX_DATA01              0x17C 0x3DC 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1                      0x17C 0x3DC 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_TXD1__GPIO4_IO13                           0x17C 0x3DC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXD2__AUDIOMIX_SAI1_TX_DATA02              0x180 0x3E0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_TXD2__AUDIOMIX_SAI5_TX_DATA02              0x180 0x3E0 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2                      0x180 0x3E0 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_TXD2__GPIO4_IO14                           0x180 0x3E0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXD3__AUDIOMIX_SAI1_TX_DATA03              0x184 0x3E4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_TXD3__AUDIOMIX_SAI5_TX_DATA03              0x184 0x3E4 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3                      0x184 0x3E4 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_TXD3__GPIO4_IO15                           0x184 0x3E4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXD4__AUDIOMIX_SAI1_TX_DATA04              0x188 0x3E8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_TXD4__AUDIOMIX_SAI6_RX_BCLK                0x188 0x3E8 0x518 0x1 0x2
+#define MX8MP_IOMUXC_SAI1_TXD4__AUDIOMIX_SAI6_TX_BCLK                0x188 0x3E8 0x524 0x2 0x2
+#define MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL                   0x188 0x3E8 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_TXD4__GPIO4_IO16                           0x188 0x3E8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXD5__AUDIOMIX_SAI1_TX_DATA05              0x18C 0x3EC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_TXD5__AUDIOMIX_SAI6_RX_DATA00              0x18C 0x3EC 0x51C 0x1 0x2
+#define MX8MP_IOMUXC_SAI1_TXD5__AUDIOMIX_SAI6_TX_DATA00              0x18C 0x3EC 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC                      0x18C 0x3EC 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_TXD5__GPIO4_IO17                           0x18C 0x3EC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXD6__AUDIOMIX_SAI1_TX_DATA06              0x190 0x3F0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_TXD6__AUDIOMIX_SAI6_RX_SYNC                0x190 0x3F0 0x520 0x1 0x2
+#define MX8MP_IOMUXC_SAI1_TXD6__AUDIOMIX_SAI6_TX_SYNC                0x190 0x3F0 0x528 0x2 0x2
+#define MX8MP_IOMUXC_SAI1_TXD6__ENET1_RX_ER                          0x190 0x3F0 0x58C 0x4 0x1
+#define MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18                           0x190 0x3F0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXD7__AUDIOMIX_SAI1_TX_DATA07              0x194 0x3F4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_TXD7__AUDIOMIX_SAI6_MCLK                   0x194 0x3F4 0x514 0x1 0x2
+#define MX8MP_IOMUXC_SAI1_TXD7__AUDIOMIX_CLK                         0x194 0x3F4 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI1_TXD7__ENET1_TX_ER                          0x194 0x3F4 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19                           0x194 0x3F4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_MCLK__AUDIOMIX_SAI1_MCLK                   0x198 0x3F8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_MCLK__AUDIOMIX_SAI5_MCLK                   0x198 0x3F8 0x4F0 0x1 0x1
+#define MX8MP_IOMUXC_SAI1_MCLK__AUDIOMIX_SAI1_TX_BCLK                0x198 0x3F8 0x4D4 0x2 0x2
+#define MX8MP_IOMUXC_SAI1_MCLK__ENET1_TX_CLK                         0x198 0x3F8 0x578 0x4 0x1
+#define MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20                           0x198 0x3F8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI2_RXFS__AUDIOMIX_SAI2_RX_SYNC                0x19C 0x3FC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI2_RXFS__AUDIOMIX_SAI5_TX_SYNC                0x19C 0x3FC 0x510 0x1 0x2
+#define MX8MP_IOMUXC_SAI2_RXFS__AUDIOMIX_SAI5_TX_DATA01              0x19C 0x3FC 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI2_RXFS__AUDIOMIX_SAI2_RX_DATA01              0x19C 0x3FC 0x4DC 0x3 0x0
+#define MX8MP_IOMUXC_SAI2_RXFS__UART1_DCE_TX                         0x19C 0x3FC 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI2_RXFS__UART1_DTE_RX                         0x19C 0x3FC 0x5E8 0x4 0x2
+#define MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21                           0x19C 0x3FC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI2_RXFS__AUDIOMIX_BIT_STREAM02                0x19C 0x3FC 0x4C8 0x6 0x4
+#define MX8MP_IOMUXC_SAI2_RXFS__SIM_M_HSIZE00                        0x19C 0x3FC 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SAI2_RXC__AUDIOMIX_SAI2_RX_BCLK                 0x1A0 0x400 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI2_RXC__AUDIOMIX_SAI5_TX_BCLK                 0x1A0 0x400 0x50C 0x1 0x2
+#define MX8MP_IOMUXC_SAI2_RXC__CAN1_TX                               0x1A0 0x400 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI2_RXC__UART1_DCE_RX                          0x1A0 0x400 0x5E8 0x4 0x3
+#define MX8MP_IOMUXC_SAI2_RXC__UART1_DTE_TX                          0x1A0 0x400 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22                            0x1A0 0x400 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI2_RXC__AUDIOMIX_BIT_STREAM01                 0x1A0 0x400 0x4C4 0x6 0x4
+#define MX8MP_IOMUXC_SAI2_RXC__SIM_M_HSIZE01                         0x1A0 0x400 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI2_RX_DATA00              0x1A4 0x404 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI5_TX_DATA00              0x1A4 0x404 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI2_RXD0__ENET_QOS_1588_EVENT2_OUT             0x1A4 0x404 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI2_TX_DATA01              0x1A4 0x404 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS                        0x1A4 0x404 0x5E4 0x4 0x2
+#define MX8MP_IOMUXC_SAI2_RXD0__UART1_DTE_CTS                        0x1A4 0x404 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI2_RXD0__GPIO4_IO23                           0x1A4 0x404 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_BIT_STREAM03                0x1A4 0x404 0x4CC 0x6 0x4
+#define MX8MP_IOMUXC_SAI2_RXD0__SIM_M_HSIZE02                        0x1A4 0x404 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC                0x1A8 0x408 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI5_TX_DATA01              0x1A8 0x408 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI2_TXFS__ENET_QOS_1588_EVENT3_OUT             0x1A8 0x408 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_DATA01              0x1A8 0x408 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI2_TXFS__UART1_DCE_CTS                        0x1A8 0x408 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI2_TXFS__UART1_DTE_RTS                        0x1A8 0x408 0x5E4 0x4 0x3
+#define MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24                           0x1A8 0x408 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_BIT_STREAM02                0x1A8 0x408 0x4C8 0x6 0x5
+#define MX8MP_IOMUXC_SAI2_TXFS__SIM_M_HWRITE                         0x1A8 0x408 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK                 0x1AC 0x40C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI5_TX_DATA02               0x1AC 0x40C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI2_TXC__CAN1_RX                               0x1AC 0x40C 0x54C 0x3 0x1
+#define MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25                            0x1AC 0x40C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_BIT_STREAM01                 0x1AC 0x40C 0x4C4 0x6 0x5
+#define MX8MP_IOMUXC_SAI2_TXC__SIM_M_HREADYOUT                       0x1AC 0x40C 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00              0x1B0 0x410 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI5_TX_DATA03              0x1B0 0x410 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI2_TXD0__ENET_QOS_1588_EVENT2_IN              0x1B0 0x410 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI2_TXD0__CAN2_TX                              0x1B0 0x410 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI2_TXD0__ENET_QOS_1588_EVENT2_AUX_IN          0x1B0 0x410 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI2_TXD0__GPIO4_IO26                           0x1B0 0x410 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI2_TXD0__CCMSRCGPCMIX_BOOT_MODE04             0x1B0 0x410 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SAI2_TXD0__TPSMP_CLK                            0x1B0 0x410 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI2_MCLK                   0x1B4 0x414 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI5_MCLK                   0x1B4 0x414 0x4F0 0x1 0x2
+#define MX8MP_IOMUXC_SAI2_MCLK__ENET_QOS_1588_EVENT3_IN              0x1B4 0x414 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI2_MCLK__CAN2_RX                              0x1B4 0x414 0x550 0x3 0x1
+#define MX8MP_IOMUXC_SAI2_MCLK__ENET_QOS_1588_EVENT3_AUX_IN          0x1B4 0x414 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27                           0x1B4 0x414 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI3_MCLK                   0x1B4 0x414 0x4E0 0x6 0x1
+#define MX8MP_IOMUXC_SAI2_MCLK__TPSMP_HDATA_DIR                      0x1B4 0x414 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SAI3_RX_SYNC                0x1B8 0x418 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SAI2_RX_DATA01              0x1B8 0x418 0x4DC 0x1 0x1
+#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SAI5_RX_SYNC                0x1B8 0x418 0x508 0x2 0x2
+#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SAI3_RX_DATA01              0x1B8 0x418 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SPDIF_IN                    0x1B8 0x418 0x544 0x4 0x2
+#define MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28                           0x1B8 0x418 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_BIT_STREAM00                0x1B8 0x418 0x4C0 0x6 0x4
+#define MX8MP_IOMUXC_SAI3_RXFS__TPSMP_HTRANS00                       0x1B8 0x418 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_SAI3_RX_BCLK                 0x1BC 0x41C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_SAI2_RX_DATA02               0x1BC 0x41C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_SAI5_RX_BCLK                 0x1BC 0x41C 0x4F4 0x2 0x2
+#define MX8MP_IOMUXC_SAI3_RXC__GPT1_CLK                              0x1BC 0x41C 0x59C 0x3 0x0
+#define MX8MP_IOMUXC_SAI3_RXC__UART2_DCE_CTS                         0x1BC 0x41C 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI3_RXC__UART2_DTE_RTS                         0x1BC 0x41C 0x5EC 0x4 0x2
+#define MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29                            0x1BC 0x41C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_CLK                          0x1BC 0x41C 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SAI3_RXC__TPSMP_HTRANS01                        0x1BC 0x41C 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00               0x1C0 0x420 0x4E4 0x0 0x1
+#define MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI2_RX_DATA03               0x1C0 0x420 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI5_RX_DATA00               0x1C0 0x420 0x4F8 0x2 0x2
+#define MX8MP_IOMUXC_SAI3_RXD__UART2_DCE_RTS                         0x1C0 0x420 0x5EC 0x4 0x3
+#define MX8MP_IOMUXC_SAI3_RXD__UART2_DTE_CTS                         0x1C0 0x420 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI3_RXD__GPIO4_IO30                            0x1C0 0x420 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_BIT_STREAM01                 0x1C0 0x420 0x4C4 0x6 0x6
+#define MX8MP_IOMUXC_SAI3_RXD__TPSMP_HDATA00                         0x1C0 0x420 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC                0x1C4 0x424 0x4EC 0x0 0x1
+#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI2_TX_DATA01              0x1C4 0x424 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI5_RX_DATA01              0x1C4 0x424 0x4FC 0x2 0x2
+#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_DATA01              0x1C4 0x424 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI3_TXFS__UART2_DCE_RX                         0x1C4 0x424 0x5F0 0x4 0x4
+#define MX8MP_IOMUXC_SAI3_TXFS__UART2_DTE_TX                         0x1C4 0x424 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31                           0x1C4 0x424 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_BIT_STREAM03                0x1C4 0x424 0x4CC 0x6 0x5
+#define MX8MP_IOMUXC_SAI3_TXFS__TPSMP_HDATA01                        0x1C4 0x424 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK                 0x1C8 0x428 0x4E8 0x0 0x1
+#define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI2_TX_DATA02               0x1C8 0x428 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI5_RX_DATA02               0x1C8 0x428 0x500 0x2 0x2
+#define MX8MP_IOMUXC_SAI3_TXC__GPT1_CAPTURE1                         0x1C8 0x428 0x594 0x3 0x0
+#define MX8MP_IOMUXC_SAI3_TXC__UART2_DCE_TX                          0x1C8 0x428 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI3_TXC__UART2_DTE_RX                          0x1C8 0x428 0x5F0 0x4 0x5
+#define MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00                            0x1C8 0x428 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_BIT_STREAM02                 0x1C8 0x428 0x4C8 0x6 0x6
+#define MX8MP_IOMUXC_SAI3_TXC__TPSMP_HDATA02                         0x1C8 0x428 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00               0x1CC 0x42C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI2_TX_DATA03               0x1CC 0x42C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI5_RX_DATA03               0x1CC 0x42C 0x504 0x2 0x2
+#define MX8MP_IOMUXC_SAI3_TXD__GPT1_CAPTURE2                         0x1CC 0x42C 0x598 0x3 0x0
+#define MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SPDIF_EXT_CLK                0x1CC 0x42C 0x548 0x4 0x0
+#define MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01                            0x1CC 0x42C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI3_TXD__CCMSRCGPCMIX_BOOT_MODE05              0x1CC 0x42C 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SAI3_TXD__TPSMP_HDATA03                         0x1CC 0x42C 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK                   0x1D0 0x430 0x4E0 0x0 0x2
+#define MX8MP_IOMUXC_SAI3_MCLK__PWM4_OUT                             0x1D0 0x430 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI5_MCLK                   0x1D0 0x430 0x4F0 0x2 0x3
+#define MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SPDIF_OUT                   0x1D0 0x430 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02                           0x1D0 0x430 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SPDIF_IN                    0x1D0 0x430 0x544 0x6 0x3
+#define MX8MP_IOMUXC_SAI3_MCLK__TPSMP_HDATA04                        0x1D0 0x430 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SPDIF_TX__AUDIOMIX_SPDIF_OUT                    0x1D4 0x434 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SPDIF_TX__PWM3_OUT                              0x1D4 0x434 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL                              0x1D4 0x434 0x5C4 0x2 0x2
+#define MX8MP_IOMUXC_SPDIF_TX__GPT1_COMPARE1                         0x1D4 0x434 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SPDIF_TX__CAN1_TX                               0x1D4 0x434 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SPDIF_TX__GPIO5_IO03                            0x1D4 0x434 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SPDIF_RX__AUDIOMIX_SPDIF_IN                     0x1D8 0x438 0x544 0x0 0x4
+#define MX8MP_IOMUXC_SPDIF_RX__PWM2_OUT                              0x1D8 0x438 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA                              0x1D8 0x438 0x5C8 0x2 0x2
+#define MX8MP_IOMUXC_SPDIF_RX__GPT1_COMPARE2                         0x1D8 0x438 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SPDIF_RX__CAN1_RX                               0x1D8 0x438 0x54C 0x4 0x2
+#define MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04                            0x1D8 0x438 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SPDIF_EXT_CLK__GPT1_COMPARE3                    0x1DC 0x43C 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05                       0x1DC 0x43C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SPDIF_EXT_CLK__AUDIOMIX_SPDIF_EXT_CLK           0x1DC 0x43C 0x548 0x0 0x1
+#define MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT                         0x1DC 0x43C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK                        0x1E0 0x440 0x558 0x0 0x0
+#define MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX                       0x1E0 0x440 0x5F8 0x1 0x4
+#define MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DTE_TX                       0x1E0 0x440 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ECSPI1_SCLK__I2C1_SCL                           0x1E0 0x440 0x5A4 0x2 0x1
+#define MX8MP_IOMUXC_ECSPI1_SCLK__AUDIOMIX_SAI7_RX_SYNC              0x1E0 0x440 0x538 0x3 0x1
+#define MX8MP_IOMUXC_ECSPI1_SCLK__GPIO5_IO06                         0x1E0 0x440 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ECSPI1_SCLK__TPSMP_HDATA08                      0x1E0 0x440 0x000 0x7 0x0
+#define MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI                        0x1E4 0x444 0x560 0x0 0x0
+#define MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX                       0x1E4 0x444 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DTE_RX                       0x1E4 0x444 0x5F8 0x1 0x5
+#define MX8MP_IOMUXC_ECSPI1_MOSI__I2C1_SDA                           0x1E4 0x444 0x5A8 0x2 0x1
+#define MX8MP_IOMUXC_ECSPI1_MOSI__AUDIOMIX_SAI7_RX_BCLK              0x1E4 0x444 0x530 0x3 0x1
+#define MX8MP_IOMUXC_ECSPI1_MOSI__GPIO5_IO07                         0x1E4 0x444 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ECSPI1_MOSI__TPSMP_HDATA09                      0x1E4 0x444 0x000 0x7 0x0
+#define MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO                        0x1E8 0x448 0x55C 0x0 0x0
+#define MX8MP_IOMUXC_ECSPI1_MISO__UART3_DCE_CTS                      0x1E8 0x448 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ECSPI1_MISO__UART3_DTE_RTS                      0x1E8 0x448 0x5F4 0x1 0x2
+#define MX8MP_IOMUXC_ECSPI1_MISO__I2C2_SCL                           0x1E8 0x448 0x5AC 0x2 0x1
+#define MX8MP_IOMUXC_ECSPI1_MISO__AUDIOMIX_SAI7_RX_DATA00            0x1E8 0x448 0x534 0x3 0x1
+#define MX8MP_IOMUXC_ECSPI1_MISO__GPIO5_IO08                         0x1E8 0x448 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ECSPI1_MISO__TPSMP_HDATA10                      0x1E8 0x448 0x000 0x7 0x0
+#define MX8MP_IOMUXC_ECSPI1_SS0__ECSPI1_SS0                          0x1EC 0x44C 0x564 0x0 0x0
+#define MX8MP_IOMUXC_ECSPI1_SS0__UART3_DCE_RTS                       0x1EC 0x44C 0x5F4 0x1 0x3
+#define MX8MP_IOMUXC_ECSPI1_SS0__UART3_DTE_CTS                       0x1EC 0x44C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ECSPI1_SS0__I2C2_SDA                            0x1EC 0x44C 0x5B0 0x2 0x1
+#define MX8MP_IOMUXC_ECSPI1_SS0__AUDIOMIX_SAI7_TX_SYNC               0x1EC 0x44C 0x540 0x3 0x1
+#define MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09                          0x1EC 0x44C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ECSPI1_SS0__TPSMP_HDATA11                       0x1EC 0x44C 0x000 0x7 0x0
+#define MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK                        0x1F0 0x450 0x568 0x0 0x1
+#define MX8MP_IOMUXC_ECSPI2_SCLK__UART4_DCE_RX                       0x1F0 0x450 0x600 0x1 0x6
+#define MX8MP_IOMUXC_ECSPI2_SCLK__UART4_DTE_TX                       0x1F0 0x450 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ECSPI2_SCLK__I2C3_SCL                           0x1F0 0x450 0x5B4 0x2 0x3
+#define MX8MP_IOMUXC_ECSPI2_SCLK__AUDIOMIX_SAI7_TX_BCLK              0x1F0 0x450 0x53C 0x3 0x1
+#define MX8MP_IOMUXC_ECSPI2_SCLK__GPIO5_IO10                         0x1F0 0x450 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ECSPI2_SCLK__TPSMP_HDATA12                      0x1F0 0x450 0x000 0x7 0x0
+#define MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI                        0x1F4 0x454 0x570 0x0 0x1
+#define MX8MP_IOMUXC_ECSPI2_MOSI__UART4_DCE_TX                       0x1F4 0x454 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ECSPI2_MOSI__UART4_DTE_RX                       0x1F4 0x454 0x600 0x1 0x7
+#define MX8MP_IOMUXC_ECSPI2_MOSI__I2C3_SDA                           0x1F4 0x454 0x5B8 0x2 0x3
+#define MX8MP_IOMUXC_ECSPI2_MOSI__AUDIOMIX_SAI7_TX_DATA00            0x1F4 0x454 0x000 0x3 0x0
+#define MX8MP_IOMUXC_ECSPI2_MOSI__GPIO5_IO11                         0x1F4 0x454 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ECSPI2_MOSI__TPSMP_HDATA13                      0x1F4 0x454 0x000 0x7 0x0
+#define MX8MP_IOMUXC_ECSPI2_MISO__GPIO5_IO12                         0x1F8 0x458 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ECSPI2_MISO__TPSMP_HDATA14                      0x1F8 0x458 0x000 0x7 0x0
+#define MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO                        0x1F8 0x458 0x56C 0x0 0x1
+#define MX8MP_IOMUXC_ECSPI2_MISO__UART4_DCE_CTS                      0x1F8 0x458 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ECSPI2_MISO__UART4_DTE_RTS                      0x1F8 0x458 0x5FC 0x1 0x2
+#define MX8MP_IOMUXC_ECSPI2_MISO__I2C4_SCL                           0x1F8 0x458 0x5BC 0x2 0x4
+#define MX8MP_IOMUXC_ECSPI2_MISO__AUDIOMIX_SAI7_MCLK                 0x1F8 0x458 0x52C 0x3 0x1
+#define MX8MP_IOMUXC_ECSPI2_MISO__CCMSRCGPCMIX_CLKO1                 0x1F8 0x458 0x000 0x4 0x0
+#define MX8MP_IOMUXC_ECSPI2_SS0__ECSPI2_SS0                          0x1FC 0x45C 0x574 0x0 0x1
+#define MX8MP_IOMUXC_ECSPI2_SS0__UART4_DCE_RTS                       0x1FC 0x45C 0x5FC 0x1 0x3
+#define MX8MP_IOMUXC_ECSPI2_SS0__UART4_DTE_CTS                       0x1FC 0x45C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ECSPI2_SS0__I2C4_SDA                            0x1FC 0x45C 0x5C0 0x2 0x4
+#define MX8MP_IOMUXC_ECSPI2_SS0__CCMSRCGPCMIX_CLKO2                  0x1FC 0x45C 0x000 0x4 0x0
+#define MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13                          0x1FC 0x45C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ECSPI2_SS0__TPSMP_HDATA15                       0x1FC 0x45C 0x000 0x7 0x0
+#define MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL                              0x200 0x460 0x5A4 0x0 0x2
+#define MX8MP_IOMUXC_I2C1_SCL__ENET_QOS_MDC                          0x200 0x460 0x000 0x1 0x0
+#define MX8MP_IOMUXC_I2C1_SCL__ECSPI1_SCLK                           0x200 0x460 0x558 0x3 0x1
+#define MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14                            0x200 0x460 0x000 0x5 0x0
+#define MX8MP_IOMUXC_I2C1_SCL__TPSMP_HDATA16                         0x200 0x460 0x000 0x7 0x0
+#define MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA                              0x204 0x464 0x5A8 0x0 0x2
+#define MX8MP_IOMUXC_I2C1_SDA__ENET_QOS_MDIO                         0x204 0x464 0x590 0x1 0x2
+#define MX8MP_IOMUXC_I2C1_SDA__ECSPI1_MOSI                           0x204 0x464 0x560 0x3 0x1
+#define MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15                            0x204 0x464 0x000 0x5 0x0
+#define MX8MP_IOMUXC_I2C1_SDA__TPSMP_HDATA17                         0x204 0x464 0x000 0x7 0x0
+#define MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL                              0x208 0x468 0x5AC 0x0 0x2
+#define MX8MP_IOMUXC_I2C2_SCL__ENET_QOS_1588_EVENT1_IN               0x208 0x468 0x000 0x1 0x0
+#define MX8MP_IOMUXC_I2C2_SCL__USDHC3_CD_B                           0x208 0x468 0x608 0x2 0x3
+#define MX8MP_IOMUXC_I2C2_SCL__ECSPI1_MISO                           0x208 0x468 0x55C 0x3 0x1
+#define MX8MP_IOMUXC_I2C2_SCL__ENET_QOS_1588_EVENT1_AUX_IN           0x208 0x468 0x000 0x4 0x0
+#define MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16                            0x208 0x468 0x000 0x5 0x0
+#define MX8MP_IOMUXC_I2C2_SCL__TPSMP_HDATA18                         0x208 0x468 0x000 0x7 0x0
+#define MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA                              0x20C 0x46C 0x5B0 0x0 0x2
+#define MX8MP_IOMUXC_I2C2_SDA__ENET_QOS_1588_EVENT1_OUT              0x20C 0x46C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_I2C2_SDA__USDHC3_WP                             0x20C 0x46C 0x634 0x2 0x3
+#define MX8MP_IOMUXC_I2C2_SDA__ECSPI1_SS0                            0x20C 0x46C 0x564 0x3 0x1
+#define MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17                            0x20C 0x46C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_I2C2_SDA__TPSMP_HDATA19                         0x20C 0x46C 0x000 0x7 0x0
+#define MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL                              0x210 0x470 0x5B4 0x0 0x4
+#define MX8MP_IOMUXC_I2C3_SCL__PWM4_OUT                              0x210 0x470 0x000 0x1 0x0
+#define MX8MP_IOMUXC_I2C3_SCL__GPT2_CLK                              0x210 0x470 0x000 0x2 0x0
+#define MX8MP_IOMUXC_I2C3_SCL__ECSPI2_SCLK                           0x210 0x470 0x568 0x3 0x2
+#define MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18                            0x210 0x470 0x000 0x5 0x0
+#define MX8MP_IOMUXC_I2C3_SCL__TPSMP_HDATA20                         0x210 0x470 0x000 0x7 0x0
+#define MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA                              0x214 0x474 0x5B8 0x0 0x4
+#define MX8MP_IOMUXC_I2C3_SDA__PWM3_OUT                              0x214 0x474 0x000 0x1 0x0
+#define MX8MP_IOMUXC_I2C3_SDA__GPT3_CLK                              0x214 0x474 0x000 0x2 0x0
+#define MX8MP_IOMUXC_I2C3_SDA__ECSPI2_MOSI                           0x214 0x474 0x570 0x3 0x2
+#define MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19                            0x214 0x474 0x000 0x5 0x0
+#define MX8MP_IOMUXC_I2C3_SDA__TPSMP_HDATA21                         0x214 0x474 0x000 0x7 0x0
+#define MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL                              0x218 0x478 0x5BC 0x0 0x5
+#define MX8MP_IOMUXC_I2C4_SCL__PWM2_OUT                              0x218 0x478 0x000 0x1 0x0
+#define MX8MP_IOMUXC_I2C4_SCL__HSIOMIX_PCIE_CLKREQ_B                 0x218 0x478 0x5A0 0x2 0x0
+#define MX8MP_IOMUXC_I2C4_SCL__ECSPI2_MISO                           0x218 0x478 0x56C 0x3 0x2
+#define MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20                            0x218 0x478 0x000 0x5 0x0
+#define MX8MP_IOMUXC_I2C4_SCL__TPSMP_HDATA22                         0x218 0x478 0x000 0x7 0x0
+#define MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA                              0x21C 0x47C 0x5C0 0x0 0x5
+#define MX8MP_IOMUXC_I2C4_SDA__PWM1_OUT                              0x21C 0x47C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_I2C4_SDA__ECSPI2_SS0                            0x21C 0x47C 0x574 0x3 0x2
+#define MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21                            0x21C 0x47C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_I2C4_SDA__TPSMP_HDATA23                         0x21C 0x47C 0x000 0x7 0x0
+#define MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX                         0x220 0x480 0x5E8 0x0 0x4
+#define MX8MP_IOMUXC_UART1_RXD__UART1_DTE_TX                         0x220 0x480 0x000 0x0 0x0
+#define MX8MP_IOMUXC_UART1_RXD__ECSPI3_SCLK                          0x220 0x480 0x000 0x1 0x0
+#define MX8MP_IOMUXC_UART1_RXD__GPIO5_IO22                           0x220 0x480 0x000 0x5 0x0
+#define MX8MP_IOMUXC_UART1_RXD__TPSMP_HDATA24                        0x220 0x480 0x000 0x7 0x0
+#define MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX                         0x224 0x484 0x000 0x0 0x0
+#define MX8MP_IOMUXC_UART1_TXD__UART1_DTE_RX                         0x224 0x484 0x5E8 0x0 0x5
+#define MX8MP_IOMUXC_UART1_TXD__ECSPI3_MOSI                          0x224 0x484 0x000 0x1 0x0
+#define MX8MP_IOMUXC_UART1_TXD__GPIO5_IO23                           0x224 0x484 0x000 0x5 0x0
+#define MX8MP_IOMUXC_UART1_TXD__TPSMP_HDATA25                        0x224 0x484 0x000 0x7 0x0
+#define MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX                         0x228 0x488 0x5F0 0x0 0x6
+#define MX8MP_IOMUXC_UART2_RXD__UART2_DTE_TX                         0x228 0x488 0x000 0x0 0x0
+#define MX8MP_IOMUXC_UART2_RXD__ECSPI3_MISO                          0x228 0x488 0x000 0x1 0x0
+#define MX8MP_IOMUXC_UART2_RXD__GPT1_COMPARE3                        0x228 0x488 0x000 0x3 0x0
+#define MX8MP_IOMUXC_UART2_RXD__GPIO5_IO24                           0x228 0x488 0x000 0x5 0x0
+#define MX8MP_IOMUXC_UART2_RXD__TPSMP_HDATA26                        0x228 0x488 0x000 0x7 0x0
+#define MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX                         0x22C 0x48C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_UART2_TXD__UART2_DTE_RX                         0x22C 0x48C 0x5F0 0x0 0x7
+#define MX8MP_IOMUXC_UART2_TXD__ECSPI3_SS0                           0x22C 0x48C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_UART2_TXD__GPT1_COMPARE2                        0x22C 0x48C 0x000 0x3 0x0
+#define MX8MP_IOMUXC_UART2_TXD__GPIO5_IO25                           0x22C 0x48C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_UART2_TXD__TPSMP_HDATA27                        0x22C 0x48C 0x000 0x7 0x0
+#define MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX                         0x230 0x490 0x5F8 0x0 0x6
+#define MX8MP_IOMUXC_UART3_RXD__UART3_DTE_TX                         0x230 0x490 0x000 0x0 0x0
+#define MX8MP_IOMUXC_UART3_RXD__UART1_DCE_CTS                        0x230 0x490 0x000 0x1 0x0
+#define MX8MP_IOMUXC_UART3_RXD__UART1_DTE_RTS                        0x230 0x490 0x5E4 0x1 0x4
+#define MX8MP_IOMUXC_UART3_RXD__USDHC3_RESET_B                       0x230 0x490 0x000 0x2 0x0
+#define MX8MP_IOMUXC_UART3_RXD__GPT1_CAPTURE2                        0x230 0x490 0x598 0x3 0x1
+#define MX8MP_IOMUXC_UART3_RXD__CAN2_TX                              0x230 0x490 0x000 0x4 0x0
+#define MX8MP_IOMUXC_UART3_RXD__GPIO5_IO26                           0x230 0x490 0x000 0x5 0x0
+#define MX8MP_IOMUXC_UART3_RXD__TPSMP_HDATA28                        0x230 0x490 0x000 0x7 0x0
+#define MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX                         0x234 0x494 0x000 0x0 0x0
+#define MX8MP_IOMUXC_UART3_TXD__UART3_DTE_RX                         0x234 0x494 0x5F8 0x0 0x7
+#define MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS                        0x234 0x494 0x5E4 0x1 0x5
+#define MX8MP_IOMUXC_UART3_TXD__UART1_DTE_CTS                        0x234 0x494 0x000 0x1 0x0
+#define MX8MP_IOMUXC_UART3_TXD__USDHC3_VSELECT                       0x234 0x494 0x000 0x2 0x0
+#define MX8MP_IOMUXC_UART3_TXD__GPT1_CLK                             0x234 0x494 0x59C 0x3 0x1
+#define MX8MP_IOMUXC_UART3_TXD__CAN2_RX                              0x234 0x494 0x550 0x4 0x2
+#define MX8MP_IOMUXC_UART3_TXD__GPIO5_IO27                           0x234 0x494 0x000 0x5 0x0
+#define MX8MP_IOMUXC_UART3_TXD__TPSMP_HDATA29                        0x234 0x494 0x000 0x7 0x0
+#define MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX                         0x238 0x498 0x600 0x0 0x8
+#define MX8MP_IOMUXC_UART4_RXD__UART4_DTE_TX                         0x238 0x498 0x000 0x0 0x0
+#define MX8MP_IOMUXC_UART4_RXD__UART2_DCE_CTS                        0x238 0x498 0x000 0x1 0x0
+#define MX8MP_IOMUXC_UART4_RXD__UART2_DTE_RTS                        0x238 0x498 0x5EC 0x1 0x4
+#define MX8MP_IOMUXC_UART4_RXD__HSIOMIX_PCIE_CLKREQ_B                0x238 0x498 0x5A0 0x2 0x1
+#define MX8MP_IOMUXC_UART4_RXD__GPT1_COMPARE1                        0x238 0x498 0x000 0x3 0x0
+#define MX8MP_IOMUXC_UART4_RXD__I2C6_SCL                             0x238 0x498 0x5CC 0x4 0x2
+#define MX8MP_IOMUXC_UART4_RXD__GPIO5_IO28                           0x238 0x498 0x000 0x5 0x0
+#define MX8MP_IOMUXC_UART4_RXD__TPSMP_HDATA30                        0x238 0x498 0x000 0x7 0x0
+#define MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX                         0x23C 0x49C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_UART4_TXD__UART4_DTE_RX                         0x23C 0x49C 0x600 0x0 0x9
+#define MX8MP_IOMUXC_UART4_TXD__UART2_DCE_RTS                        0x23C 0x49C 0x5EC 0x1 0x5
+#define MX8MP_IOMUXC_UART4_TXD__UART2_DTE_CTS                        0x23C 0x49C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_UART4_TXD__GPT1_CAPTURE1                        0x23C 0x49C 0x594 0x3 0x1
+#define MX8MP_IOMUXC_UART4_TXD__I2C6_SDA                             0x23C 0x49C 0x5D0 0x4 0x2
+#define MX8MP_IOMUXC_UART4_TXD__GPIO5_IO29                           0x23C 0x49C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_UART4_TXD__TPSMP_HDATA31                        0x23C 0x49C 0x000 0x7 0x0
+#define MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_EARC_SCL                  0x240 0x4A0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_HDMI_DDC_SCL__I2C5_SCL                          0x240 0x4A0 0x5C4 0x3 0x3
+#define MX8MP_IOMUXC_HDMI_DDC_SCL__CAN1_TX                           0x240 0x4A0 0x000 0x4 0x0
+#define MX8MP_IOMUXC_HDMI_DDC_SCL__GPIO3_IO26                        0x240 0x4A0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_HDMI_DDC_SCL__AUDIOMIX_test_out00               0x240 0x4A0 0x000 0x6 0x0
+#define MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_EARC_SDA                  0x244 0x4A4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_HDMI_DDC_SDA__I2C5_SDA                          0x244 0x4A4 0x5C8 0x3 0x3
+#define MX8MP_IOMUXC_HDMI_DDC_SDA__CAN1_RX                           0x244 0x4A4 0x54C 0x4 0x3
+#define MX8MP_IOMUXC_HDMI_DDC_SDA__GPIO3_IO27                        0x244 0x4A4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_HDMI_DDC_SDA__AUDIOMIX_test_out01               0x244 0x4A4 0x000 0x6 0x0
+#define MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_EARC_CEC                      0x248 0x4A8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_HDMI_CEC__I2C6_SCL                              0x248 0x4A8 0x5CC 0x3 0x3
+#define MX8MP_IOMUXC_HDMI_CEC__CAN2_TX                               0x248 0x4A8 0x000 0x4 0x0
+#define MX8MP_IOMUXC_HDMI_CEC__GPIO3_IO28                            0x248 0x4A8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_EARC_DC_HPD                   0x24C 0x4AC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_HDMI_HPD__AUDIOMIX_EARC_HDMI_HPD_O              0x24C 0x4AC 0x000 0x1 0x0
+#define MX8MP_IOMUXC_HDMI_HPD__I2C6_SDA                              0x24C 0x4AC 0x5D0 0x3 0x3
+#define MX8MP_IOMUXC_HDMI_HPD__CAN2_RX                               0x24C 0x4AC 0x550 0x4 0x3
+#define MX8MP_IOMUXC_HDMI_HPD__GPIO3_IO29                            0x24C 0x4AC 0x000 0x5 0x0
+
+#endif /* __DTS_IMX8MP_PINFUNC_H */
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
new file mode 100644
index 0000000..9b1616e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -0,0 +1,654 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <dt-bindings/clock/imx8mp-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "imx8mp-pinfunc.h"
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		A53_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			clock-latency = <61036>;
+			clocks = <&clk IMX8MP_CLK_ARM>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+		};
+
+		A53_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			clock-latency = <61036>;
+			clocks = <&clk IMX8MP_CLK_ARM>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+		};
+
+		A53_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			clock-latency = <61036>;
+			clocks = <&clk IMX8MP_CLK_ARM>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+		};
+
+		A53_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			clock-latency = <61036>;
+			clocks = <&clk IMX8MP_CLK_ARM>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+		};
+
+		A53_L2: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	osc_32k: clock-osc-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "osc_32k";
+	};
+
+	osc_24m: clock-osc-24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc_24m";
+	};
+
+	clk_ext1: clock-ext1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext1";
+	};
+
+	clk_ext2: clock-ext2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext2";
+	};
+
+	clk_ext3: clock-ext3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext3";
+	};
+
+	clk_ext4: clock-ext4 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency= <133000000>;
+		clock-output-names = "clk_ext4";
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <8000000>;
+		arm,no-tick-in-suspend;
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x3e000000>;
+
+		aips1: bus@30000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x301f0000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gpio1: gpio@30200000 {
+				compatible = "fsl,imx8mp-gpio", "fsl,imx35-gpio";
+				reg = <0x30200000 0x10000>;
+				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPIO1_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 5 30>;
+			};
+
+			gpio2: gpio@30210000 {
+				compatible = "fsl,imx8mp-gpio", "fsl,imx35-gpio";
+				reg = <0x30210000 0x10000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPIO2_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 35 21>;
+			};
+
+			gpio3: gpio@30220000 {
+				compatible = "fsl,imx8mp-gpio", "fsl,imx35-gpio";
+				reg = <0x30220000 0x10000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPIO3_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 56 26>, <&iomuxc 0 144 4>;
+			};
+
+			gpio4: gpio@30230000 {
+				compatible = "fsl,imx8mp-gpio", "fsl,imx35-gpio";
+				reg = <0x30230000 0x10000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPIO4_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 82 32>;
+			};
+
+			gpio5: gpio@30240000 {
+				compatible = "fsl,imx8mp-gpio", "fsl,imx35-gpio";
+				reg = <0x30240000 0x10000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPIO5_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 114 30>;
+			};
+
+			wdog1: watchdog@30280000 {
+				compatible = "fsl,imx8mp-wdt", "fsl,imx21-wdt";
+				reg = <0x30280000 0x10000>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_WDOG1_ROOT>;
+				status = "disabled";
+			};
+
+			iomuxc: pinctrl@30330000 {
+				compatible = "fsl,imx8mp-iomuxc";
+				reg = <0x30330000 0x10000>;
+			};
+
+			gpr: iomuxc-gpr@30340000 {
+				compatible = "fsl,imx8mp-iomuxc-gpr", "syscon";
+				reg = <0x30340000 0x10000>;
+			};
+
+			ocotp: ocotp-ctrl@30350000 {
+				compatible = "fsl,imx8mp-ocotp", "syscon";
+				reg = <0x30350000 0x10000>;
+				clocks = <&clk IMX8MP_CLK_OCOTP_ROOT>;
+				/* For nvmem subnodes */
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				cpu_speed_grade: speed-grade@10 {
+					reg = <0x10 4>;
+				};
+			};
+
+			anatop: anatop@30360000 {
+				compatible = "fsl,imx8mp-anatop", "fsl,imx8mm-anatop",
+					     "syscon";
+				reg = <0x30360000 0x10000>;
+			};
+
+			snvs: snvs@30370000 {
+				compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd";
+				reg = <0x30370000 0x10000>;
+
+				snvs_rtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap =<&snvs>;
+					offset = <0x34>;
+					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MP_CLK_SNVS_ROOT>;
+					clock-names = "snvs-rtc";
+				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MP_CLK_SNVS_ROOT>;
+					clock-names = "snvs-pwrkey";
+					linux,keycode = <KEY_POWER>;
+					wakeup-source;
+					status = "disabled";
+				};
+			};
+
+			clk: clock-controller@30380000 {
+				compatible = "fsl,imx8mp-ccm";
+				reg = <0x30380000 0x10000>;
+				#clock-cells = <1>;
+				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
+					 <&clk_ext3>, <&clk_ext4>;
+				clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
+					      "clk_ext3", "clk_ext4";
+				assigned-clocks = <&clk IMX8MP_CLK_NOC>,
+						  <&clk IMX8MP_CLK_NOC_IO>,
+						  <&clk IMX8MP_CLK_GIC>,
+						  <&clk IMX8MP_CLK_AUDIO_AHB>,
+						  <&clk IMX8MP_CLK_AUDIO_AXI_SRC>,
+						  <&clk IMX8MP_CLK_IPG_AUDIO_ROOT>,
+						  <&clk IMX8MP_AUDIO_PLL1>,
+						  <&clk IMX8MP_AUDIO_PLL2>;
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>,
+							 <&clk IMX8MP_SYS_PLL1_800M>,
+							 <&clk IMX8MP_SYS_PLL2_500M>,
+							 <&clk IMX8MP_SYS_PLL1_800M>,
+							 <&clk IMX8MP_SYS_PLL1_800M>;
+				assigned-clock-rates = <1000000000>,
+						       <800000000>,
+						       <500000000>,
+						       <400000000>,
+						       <800000000>,
+						       <400000000>,
+						       <393216000>,
+						       <361267200>;
+			};
+
+			src: reset-controller@30390000 {
+				compatible = "fsl,imx8mp-src", "syscon";
+				reg = <0x30390000 0x10000>;
+				#reset-cells = <1>;
+			};
+		};
+
+		aips2: bus@30400000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x305f0000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pwm1: pwm@30660000 {
+				compatible = "fsl,imx8mp-pwm", "fsl,imx27-pwm";
+				reg = <0x30660000 0x10000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_PWM1_ROOT>,
+					 <&clk IMX8MP_CLK_PWM1_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm2: pwm@30670000 {
+				compatible = "fsl,imx8mp-pwm", "fsl,imx27-pwm";
+				reg = <0x30670000 0x10000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_PWM2_ROOT>,
+					 <&clk IMX8MP_CLK_PWM2_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm3: pwm@30680000 {
+				compatible = "fsl,imx8mp-pwm", "fsl,imx27-pwm";
+				reg = <0x30680000 0x10000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_PWM3_ROOT>,
+					 <&clk IMX8MP_CLK_PWM3_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm4: pwm@30690000 {
+				compatible = "fsl,imx8mp-pwm", "fsl,imx27-pwm";
+				reg = <0x30690000 0x10000>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_PWM4_ROOT>,
+					 <&clk IMX8MP_CLK_PWM4_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			system_counter: timer@306a0000 {
+				compatible = "nxp,sysctr-timer";
+				reg = <0x306a0000 0x20000>;
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&osc_24m>;
+				clock-names = "per";
+			};
+		};
+
+		aips3: bus@30800000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x309f0000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			ecspi1: spi@30820000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx8mp-ecspi", "fsl,imx51-ecspi";
+				reg = <0x30820000 0x10000>;
+				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_ECSPI1_ROOT>,
+					 <&clk IMX8MP_CLK_ECSPI1_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			ecspi2: spi@30830000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx8mp-ecspi", "fsl,imx51-ecspi";
+				reg = <0x30830000 0x10000>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_ECSPI2_ROOT>,
+					 <&clk IMX8MP_CLK_ECSPI2_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			ecspi3: spi@30840000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx8mp-ecspi", "fsl,imx51-ecspi";
+				reg = <0x30840000 0x10000>;
+				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_ECSPI3_ROOT>,
+					 <&clk IMX8MP_CLK_ECSPI3_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart1: serial@30860000 {
+				compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
+				reg = <0x30860000 0x10000>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_UART1_ROOT>,
+					 <&clk IMX8MP_CLK_UART1_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart3: serial@30880000 {
+				compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
+				reg = <0x30880000 0x10000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_UART3_ROOT>,
+					 <&clk IMX8MP_CLK_UART3_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart2: serial@30890000 {
+				compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
+				reg = <0x30890000 0x10000>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_UART2_ROOT>,
+					 <&clk IMX8MP_CLK_UART2_ROOT>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			crypto: crypto@30900000 {
+				compatible = "fsl,sec-v4.0";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x30900000 0x40000>;
+				ranges = <0 0x30900000 0x40000>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_AHB>,
+					 <&clk IMX8MP_CLK_IPG_ROOT>;
+				clock-names = "aclk", "ipg";
+
+				sec_jr0: jr@1000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x1000 0x1000>;
+					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr1: jr@2000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x2000 0x1000>;
+					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr2: jr@3000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x3000 0x1000>;
+					interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+
+			i2c1: i2c@30a20000 {
+				compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30a20000 0x10000>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_I2C1_ROOT>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@30a30000 {
+				compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30a30000 0x10000>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_I2C2_ROOT>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@30a40000 {
+				compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30a40000 0x10000>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_I2C3_ROOT>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@30a50000 {
+				compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30a50000 0x10000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_I2C4_ROOT>;
+				status = "disabled";
+			};
+
+			uart4: serial@30a60000 {
+				compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
+				reg = <0x30a60000 0x10000>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_UART4_ROOT>,
+					 <&clk IMX8MP_CLK_UART4_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			i2c5: i2c@30ad0000 {
+				compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30ad0000 0x10000>;
+				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_I2C5_ROOT>;
+				status = "disabled";
+			};
+
+			i2c6: i2c@30ae0000 {
+				compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30ae0000 0x10000>;
+				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_I2C6_ROOT>;
+				status = "disabled";
+			};
+
+			usdhc1: mmc@30b40000 {
+				compatible = "fsl,imx8mp-usdhc", "fsl,imx7d-usdhc";
+				reg = <0x30b40000 0x10000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_DUMMY>,
+					 <&clk IMX8MP_CLK_NAND_USDHC_BUS>,
+					 <&clk IMX8MP_CLK_USDHC1_ROOT>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step= <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@30b50000 {
+				compatible = "fsl,imx8mp-usdhc", "fsl,imx7d-usdhc";
+				reg = <0x30b50000 0x10000>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_DUMMY>,
+					 <&clk IMX8MP_CLK_NAND_USDHC_BUS>,
+					 <&clk IMX8MP_CLK_USDHC2_ROOT>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step= <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc3: mmc@30b60000 {
+				compatible = "fsl,imx8mp-usdhc", "fsl,imx7d-usdhc";
+				reg = <0x30b60000 0x10000>;
+				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_DUMMY>,
+					 <&clk IMX8MP_CLK_NAND_USDHC_BUS>,
+					 <&clk IMX8MP_CLK_USDHC3_ROOT>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step= <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			sdma1: dma-controller@30bd0000 {
+				compatible = "fsl,imx8mp-sdma", "fsl,imx8mq-sdma";
+				reg = <0x30bd0000 0x10000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_SDMA1_ROOT>,
+					 <&clk IMX8MP_CLK_SDMA1_ROOT>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			fec: ethernet@30be0000 {
+				compatible = "fsl,imx8mp-fec", "fsl,imx8mq-fec";
+				reg = <0x30be0000 0x10000>;
+				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_ENET1_ROOT>,
+					 <&clk IMX8MP_CLK_SIM_ENET_ROOT>,
+					 <&clk IMX8MP_CLK_ENET_TIMER>,
+					 <&clk IMX8MP_CLK_ENET_REF>,
+					 <&clk IMX8MP_CLK_ENET_PHY_REF>;
+				clock-names = "ipg", "ahb", "ptp",
+					      "enet_clk_ref", "enet_out";
+				assigned-clocks = <&clk IMX8MP_CLK_ENET_AXI>,
+						  <&clk IMX8MP_CLK_ENET_TIMER>,
+						  <&clk IMX8MP_CLK_ENET_REF>,
+						  <&clk IMX8MP_CLK_ENET_TIMER>;
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>,
+							 <&clk IMX8MP_SYS_PLL2_100M>,
+							 <&clk IMX8MP_SYS_PLL2_125M>;
+				assigned-clock-rates = <0>, <0>, <125000000>, <100000000>;
+				fsl,num-tx-queues = <3>;
+				fsl,num-rx-queues = <3>;
+				status = "disabled";
+			};
+		};
+
+		gic: interrupt-controller@38800000 {
+			compatible = "arm,gic-v3";
+			reg = <0x38800000 0x10000>,
+			      <0x38880000 0xc0000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index 94066d4..c9241ab 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -137,6 +137,8 @@ &fec1 {
 	pinctrl-0 = <&pinctrl_fec1>;
 	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy0>;
+	phy-reset-gpios = <&gpio1 9  GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <10>;
 	fsl,magic-packet;
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 764a4cb..10eca941 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -55,6 +55,15 @@ hp-det {
 			wakeup-source;
 			linux,code = <KEY_HP>;
 		};
+
+		wwan-wake {
+			label = "WWAN_WAKE";
+			gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <8 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+			linux,code = <KEY_PHONE>;
+		};
 	};
 
 	leds {
@@ -148,6 +157,55 @@ reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
 		regulator-always-on;
 	};
 
+	wwan_codec: sound-wwan-codec {
+		compatible = "option,gtm601";
+		#sound-dai-cells = <0>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker Ext",
+			"Line", "Line In Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"Microphone Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"Speaker Ext", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+			clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
+			frame-master;
+			bitclock-master;
+		};
+	};
+
+	sound-wwan {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SIMCom SIM7100";
+		simple-audio-card,format = "dsp_a";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai6>;
+		};
+
+		telephony_link_master: simple-audio-card,codec {
+			sound-dai = <&wwan_codec>;
+			frame-master;
+			bitclock-master;
+		};
+	};
+
 	vibrator {
 		compatible = "gpio-vibrator";
 		pinctrl-names = "default";
@@ -169,6 +227,22 @@ wifi_pwr_en: regulator-wifi-en {
 	};
 };
 
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2_reg>;
+};
+
 &clk {
 	assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL2>;
 	assigned-clock-rates = <786432000>, <722534400>;
@@ -354,10 +428,10 @@ connector {
 				PDO_FIXED_USB_COMM |
 				PDO_FIXED_DUAL_ROLE |
 				PDO_FIXED_DATA_SWAP )>;
-			sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM |
+			sink-pdos = <PDO_FIXED(5000, 3500, PDO_FIXED_USB_COMM |
 				PDO_FIXED_DUAL_ROLE |
 				PDO_FIXED_DATA_SWAP )
-			     PDO_VAR(5000, 3000, 3000)>;
+			     PDO_VAR(5000, 5000, 3500)>;
 			op-sink-microwatt = <10000000>;
 
 			ports {
@@ -426,6 +500,19 @@ magnetometer@1e	{
 		vddio-supply = <&reg_3v3_p>;
 	};
 
+	sgtl5000: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
+		assigned-clocks = <&clk IMX8MQ_CLK_SAI2>;
+		assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+		assigned-clock-rates = <24576000>;
+		#sound-dai-cells = <0>;
+		reg = <0x0a>;
+		VDDD-supply = <&reg_1v8_p>;
+		VDDIO-supply = <&reg_3v3_p>;
+		VDDA-supply = <&reg_3v3_p>;
+	};
+
 	touchscreen@5d {
 		compatible = "goodix,gt5688";
 		reg = <0x5d>;
@@ -441,11 +528,20 @@ touchscreen@5d {
 		VDDIO-supply = <&reg_1v8_p>;
 	};
 
+	proximity-sensor@60 {
+		compatible = "vishay,vcnl4040";
+		reg = <0x60>;
+		pinctrl-0 = <&pinctrl_prox>;
+	};
+
 	accel-gyro@6a {
 		compatible = "st,lsm9ds1-imu";
 		reg = <0x6a>;
 		vdd-supply = <&reg_3v3_p>;
 		vddio-supply = <&reg_3v3_p>;
+		mount-matrix =  "1",  "0",  "0",
+				"0",  "1",  "0",
+				"0",  "0", "-1";
 	};
 };
 
@@ -508,6 +604,7 @@ pinctrl_gpio_keys: gpiokeygrp {
 			MX8MQ_IOMUXC_SAI2_RXFS_GPIO4_IO21	0x16
 			MX8MQ_IOMUXC_SAI2_RXC_GPIO4_IO22	0x16
 			MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20	0x180  /* HP_DET */
+			MX8MQ_IOMUXC_NAND_DATA02_GPIO3_IO8	0x80   /* nWoWWAN */
 		>;
 	};
 
@@ -543,6 +640,12 @@ MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x80  /* PMIC intr */
 		>;
 	};
 
+	pinctrl_prox: proxgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x80  /* prox intr */
+		>;
+	};
+
 	pinctrl_pwr_en: pwrengrp {
 		fsl,pins = <
 			MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8	0x06
@@ -555,6 +658,25 @@ MX8MQ_IOMUXC_SAI3_RXC_GPIO4_IO29	0x80  /* RTC intr */
 		>;
 	};
 
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC	0xd6
+			MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK	0xd6
+			MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0	0xd6
+			MX8MQ_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0	0xd6
+			MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK	0xd6
+		>;
+	};
+
+	pinctrl_sai6: sai6grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI1_RXD5_SAI6_RX_DATA0	0xd6
+			MX8MQ_IOMUXC_SAI1_RXD6_SAI6_RX_SYNC	0xd6
+			MX8MQ_IOMUXC_SAI1_TXD4_SAI6_RX_BCLK     0xd6
+			MX8MQ_IOMUXC_SAI1_TXD5_SAI6_TX_DATA0	0xd6
+		>;
+	};
+
 	pinctrl_typec: typecgrp {
 		fsl,pins = <
 			MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12		0x16
@@ -730,6 +852,25 @@ &snvs_pwrkey {
 	status = "okay";
 };
 
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clk IMX8MQ_CLK_SAI2>;
+	assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
+&sai6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai6>;
+	assigned-clocks = <&clk IMX8MQ_CLK_SAI6>;
+	assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	fsl,sai-synchronous-rx;
+	status = "okay";
+};
+
 &uart1 { /* console */
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
@@ -750,6 +891,7 @@ &uart4 { /* BT */
 };
 
 &usb3_phy0 {
+	vbus-supply = <&reg_5v_p>;
 	status = "okay";
 };
 
@@ -808,7 +950,7 @@ &usdhc2 {
 	bus-width = <4>;
 	vmmc-supply = <&reg_usdhc2_vmmc>;
 	power-supply = <&wifi_pwr_en>;
-	non-removable;
+	broken-cd;
 	disable-wp;
 	cap-sdio-irq;
 	keep-power-in-suspend;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts b/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
index 3f2a489..77ab568 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
@@ -35,6 +35,16 @@ reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
 		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+	fan: gpio-fan {
+		compatible = "gpio-fan";
+		gpio-fan,speed-map = <0 0 8600 1>;
+		gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+		#cooling-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_fan>;
+		status = "okay";
+	};
 };
 
 &A53_0 {
@@ -53,6 +63,53 @@ &A53_3 {
 	cpu-supply = <&buck2>;
 };
 
+&cpu_thermal {
+	trips {
+		cpu_alert0: trip0 {
+			temperature = <75000>;
+			hysteresis = <2000>;
+			type = "passive";
+		};
+
+		cpu_alert1: trip1 {
+			temperature = <80000>;
+			hysteresis = <2000>;
+			type = "passive";
+		};
+
+		cpu_crit0: trip3 {
+			temperature = <90000>;
+			hysteresis = <2000>;
+			type = "critical";
+		};
+
+		fan_toggle0: trip4 {
+			temperature = <65000>;
+			hysteresis = <10000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map0 {
+			trip = <&cpu_alert0>;
+			cooling-device =
+			<&A53_0 0 1>; /* Exclude highest OPP */
+		};
+
+		map1 {
+			trip = <&cpu_alert1>;
+			cooling-device =
+			<&A53_0 0 2>; /* Exclude two highest OPPs */
+		};
+
+		map4 {
+			trip = <&fan_toggle0>;
+			cooling-device = <&fan 0 1>;
+		};
+	};
+};
+
 &i2c1 {
 	clock-frequency = <400000>;
 	pinctrl-names = "default";
@@ -201,6 +258,27 @@ ldo7: LDO7 {
 	};
 };
 
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <10>;
+	phy-reset-post-delay = <50>;
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+	};
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
@@ -254,6 +332,32 @@ &wdog1 {
 };
 
 &iomuxc {
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO		0x23
+			MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
+		>;
+	};
+
+	pinctrl_gpio_fan: gpiofangrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5			0x16
+		>;
+	};
+
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
 			MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL			0x4000007f
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 6a1e839..75b3842 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -198,7 +198,7 @@ psci {
 	};
 
 	thermal-zones {
-		cpu-thermal {
+		cpu_thermal: cpu-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <2000>;
 			thermal-sensors = <&tmu 0>;
@@ -290,7 +290,8 @@ soc@0 {
 		dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>;
 
 		bus@30000000 { /* AIPS1 */
-			compatible = "simple-bus";
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x301f0000 0x10000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x30000000 0x30000000 0x400000>;
@@ -521,7 +522,7 @@ lcdif: lcd-controller@30320000 {
 				status = "disabled";
 			};
 
-			iomuxc: iomuxc@30330000 {
+			iomuxc: pinctrl@30330000 {
 				compatible = "fsl,imx8mq-iomuxc";
 				reg = <0x30330000 0x10000>;
 			};
@@ -574,6 +575,8 @@ snvs_pwrkey: snvs-powerkey {
 					compatible = "fsl,sec-v4.0-pwrkey";
 					regmap = <&snvs>;
 					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MQ_CLK_SNVS_ROOT>;
+					clock-names = "snvs-pwrkey";
 					linux,keycode = <KEY_POWER>;
 					wakeup-source;
 					status = "disabled";
@@ -692,7 +695,8 @@ pgc_pcie2: power-domain@a {
 		};
 
 		bus@30400000 { /* AIPS2 */
-			compatible = "simple-bus";
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x305f0000 0x10000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x30400000 0x30400000 0x400000>;
@@ -751,7 +755,8 @@ system_counter: timer@306a0000 {
 		};
 
 		bus@30800000 { /* AIPS3 */
-			compatible = "simple-bus";
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x309f0000 0x10000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x30800000 0x30800000 0x400000>,
@@ -1023,7 +1028,8 @@ fec1: ethernet@30be0000 {
 		};
 
 		bus@32c00000 { /* AIPS4 */
-			compatible = "simple-bus";
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x32df0000 0x10000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x32c00000 0x32c00000 0x400000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index fb5f752..e8ffb75 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -11,6 +11,7 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/pinctrl/pads-imx8qxp.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -189,6 +190,11 @@ watchdog {
 			compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
 			timeout-sec = <60>;
 		};
+
+		tsens: thermal-sensor {
+			compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal";
+			#thermal-sensor-cells = <1>;
+		};
 	};
 
 	timer {
@@ -586,4 +592,37 @@ lsio_lpcg: clock-controller@5d400000 {
 			#clock-cells = <1>;
 		};
 	};
+
+	thermal_zones: thermal-zones {
+		cpu-thermal0 {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tsens IMX_SC_R_SYSTEM>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <107000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit0: trip1 {
+					temperature = <127000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+						<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A35_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A35_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/freescale/s32v234.dtsi b/arch/arm64/boot/dts/freescale/s32v234.dtsi
index e746b9c..ba0b530 100644
--- a/arch/arm64/boot/dts/freescale/s32v234.dtsi
+++ b/arch/arm64/boot/dts/freescale/s32v234.dtsi
@@ -104,7 +104,7 @@ soc {
 		interrupt-parent = <&gic>;
 		ranges;
 
-		aips0: aips-bus@40000000 {
+		aips0: bus@40000000 {
 			compatible = "simple-bus";
 			#address-cells = <2>;
 			#size-cells = <2>;
@@ -120,7 +120,7 @@ uart0: serial@40053000 {
 			};
 		};
 
-		aips1: aips-bus@40080000 {
+		aips1: bus@40080000 {
 			compatible = "simple-bus";
 			#address-cells = <2>;
 			#size-cells = <2>;
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
index e794a12..51d9483 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
@@ -121,12 +121,12 @@ partitions {
 
 			qspi_boot: partition@0 {
 				label = "Boot and fpga data";
-				reg = <0x0 0x034B0000>;
+				reg = <0x0 0x03FE0000>;
 			};
 
-			qspi_rootfs: partition@34B0000 {
+			qspi_rootfs: partition@3FE0000 {
 				label = "Root Filesystem - JFFS2";
-				reg = <0x034B0000 0x0EB50000>;
+				reg = <0x03FE0000 0x0C020000>;
 			};
 		};
 	};
diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
index f1b5127..3e5f2e7 100644
--- a/arch/arm64/boot/dts/marvell/Makefile
+++ b/arch/arm64/boot/dts/marvell/Makefile
@@ -2,6 +2,9 @@
 # Mvebu SoC Family
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-emmc.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-v7.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-v7-emmc.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-turris-mox.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-uDPU.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts
index bd9ed9d..ec72a11 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts
@@ -11,6 +11,8 @@
  * Schematic available at http://espressobin.net/wp-content/uploads/2017/08/ESPRESSObin_V5_Schematics.pdf
  */
 
+/dts-v1/;
+
 #include "armada-3720-espressobin.dtsi"
 
 / {
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
index 6e876a6..03733fd 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
@@ -11,6 +11,8 @@
  * Schematic available at http://wiki.espressobin.net/tiki-download_file.php?fileId=200
  */
 
+/dts-v1/;
+
 #include "armada-3720-espressobin.dtsi"
 
 / {
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
index 0f8405d..8570c5f 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
@@ -11,6 +11,8 @@
  * Schematic available at http://wiki.espressobin.net/tiki-download_file.php?fileId=200
  */
 
+/dts-v1/;
+
 #include "armada-3720-espressobin.dtsi"
 
 / {
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
index 53b8ac5..42e992f 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
@@ -7,12 +7,16 @@
  *
  */
 
-/dts-v1/;
-
 #include <dt-bindings/gpio/gpio.h>
 #include "armada-372x.dtsi"
 
 / {
+	aliases {
+		ethernet0 = &eth0;
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
index a211a04..b90d78a 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
@@ -367,6 +367,7 @@ ge_phy: ethernet-phy@0 {
 		pinctrl-0 = <&cp0_copper_eth_phy_reset>;
 		reset-gpios = <&cp0_gpio2 11 GPIO_ACTIVE_LOW>;
 		reset-assert-us = <10000>;
+		reset-deassert-us = <10000>;
 	};
 
 	switch0: switch0@4 {
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
index 572e261..cbcb210 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
@@ -71,6 +71,7 @@ sfp_eth0: sfp-eth0 {
 		tx-fault-gpio  = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cp1_sfpp0_pins>;
+		maximum-power-milliwatt = <2000>;
 	};
 
 	sfp_eth1: sfp-eth1 {
@@ -83,6 +84,7 @@ sfp_eth1: sfp-eth1 {
 		tx-fault-gpio = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cp1_sfpp1_pins &cp0_sfpp1_pins>;
+		maximum-power-milliwatt = <2000>;
 	};
 
 	sfp_eth3: sfp-eth3 {
@@ -95,6 +97,7 @@ sfp_eth3: sfp-eth3 {
 		tx-fault-gpio = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cp0_sfp_1g_pins &cp1_sfp_1g_pins>;
+		maximum-power-milliwatt = <2000>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
index 0984955..fcab517 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
@@ -53,4 +53,9 @@ l2: l2-cache {
 			cache-sets = <512>;
 		};
 	};
+
+	thermal-zones {
+		/delete-node/ ap-thermal-cpu2;
+		/delete-node/ ap-thermal-cpu3;
+	};
 };
diff --git a/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi
index 840466e..68782f1 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi
@@ -17,7 +17,7 @@ cpus {
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a72", "arm,armv8";
+			compatible = "arm,cortex-a72";
 			reg = <0x000>;
 			enable-method = "psci";
 			#cooling-cells = <2>;
@@ -32,7 +32,7 @@ cpu0: cpu@0 {
 		};
 		cpu1: cpu@1 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a72", "arm,armv8";
+			compatible = "arm,cortex-a72";
 			reg = <0x001>;
 			enable-method = "psci";
 			#cooling-cells = <2>;
@@ -47,7 +47,7 @@ cpu1: cpu@1 {
 		};
 		cpu2: cpu@100 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a72", "arm,armv8";
+			compatible = "arm,cortex-a72";
 			reg = <0x100>;
 			enable-method = "psci";
 			#cooling-cells = <2>;
@@ -62,7 +62,7 @@ cpu2: cpu@100 {
 		};
 		cpu3: cpu@101 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a72", "arm,armv8";
+			compatible = "arm,cortex-a72";
 			reg = <0x101>;
 			enable-method = "psci";
 			#cooling-cells = <2>;
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 458bbc4..2f8967c 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -8,3 +8,4 @@
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
index 43307ba..2cd8b33 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
@@ -278,7 +278,7 @@ pio: pinctrl@10005000 {
 		interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
-	scpsys: scpsys@10006000 {
+	scpsys: power-controller@10006000 {
 		compatible = "mediatek,mt2712-scpsys", "syscon";
 		#power-domain-cells = <1>;
 		reg = <0 0x10006000 0 0x1000>;
@@ -303,6 +303,12 @@ uart5: serial@1000f000 {
 		status = "disabled";
 	};
 
+	rtc: rtc@10011000 {
+		compatible = "mediatek,mt2712-rtc";
+		reg = <0 0x10011000 0 0x1000>;
+		interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_LOW>;
+	};
+
 	spis1: spi@10013000 {
 		compatible = "mediatek,mt2712-spi-slave";
 		reg = <0 0x10013000 0 0x100>;
diff --git a/arch/arm64/boot/dts/mediatek/mt6797.dtsi b/arch/arm64/boot/dts/mediatek/mt6797.dtsi
index 2b2a69c..136ef95 100644
--- a/arch/arm64/boot/dts/mediatek/mt6797.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6797.dtsi
@@ -157,7 +157,7 @@ pins1 {
 		};
 	};
 
-	scpsys: scpsys@10006000 {
+	scpsys: power-controller@10006000 {
 		compatible = "mediatek,mt6797-scpsys";
 		#power-domain-cells = <1>;
 		reg = <0 0x10006000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index dac51e9..339dc9f 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -230,7 +230,7 @@ pericfg: pericfg@10002000 {
 		#reset-cells = <1>;
 	};
 
-	scpsys: scpsys@10006000 {
+	scpsys: power-controller@10006000 {
 		compatible = "mediatek,mt7622-scpsys",
 			     "syscon";
 		#power-domain-cells = <1>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 8b4e806..ccb8e88 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -331,6 +331,7 @@ timer {
 			      (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 10
 			      (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,no-tick-in-suspend;
 	};
 
 	soc {
@@ -436,7 +437,7 @@ pins1 {
 			};
 		};
 
-		scpsys: scpsys@10006000 {
+		scpsys: power-controller@10006000 {
 			compatible = "mediatek,mt8173-scpsys";
 			#power-domain-cells = <1>;
 			reg = <0 0x10006000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 124f9d3..97863ad 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -74,6 +74,9 @@ cpu0: cpu@0 {
 			reg = <0x000>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <741>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			dynamic-power-coefficient = <84>;
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
@@ -82,6 +85,9 @@ cpu1: cpu@1 {
 			reg = <0x001>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <741>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			dynamic-power-coefficient = <84>;
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@2 {
@@ -90,6 +96,9 @@ cpu2: cpu@2 {
 			reg = <0x002>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <741>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			dynamic-power-coefficient = <84>;
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@3 {
@@ -98,6 +107,9 @@ cpu3: cpu@3 {
 			reg = <0x003>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <741>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			dynamic-power-coefficient = <84>;
+			#cooling-cells = <2>;
 		};
 
 		cpu4: cpu@100 {
@@ -106,6 +118,9 @@ cpu4: cpu@100 {
 			reg = <0x100>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			dynamic-power-coefficient = <211>;
+			#cooling-cells = <2>;
 		};
 
 		cpu5: cpu@101 {
@@ -114,6 +129,9 @@ cpu5: cpu@101 {
 			reg = <0x101>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			dynamic-power-coefficient = <211>;
+			#cooling-cells = <2>;
 		};
 
 		cpu6: cpu@102 {
@@ -122,6 +140,9 @@ cpu6: cpu@102 {
 			reg = <0x102>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			dynamic-power-coefficient = <211>;
+			#cooling-cells = <2>;
 		};
 
 		cpu7: cpu@103 {
@@ -130,6 +151,31 @@ cpu7: cpu@103 {
 			reg = <0x103>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			dynamic-power-coefficient = <211>;
+			#cooling-cells = <2>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP: cpu-sleep {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x00010001>;
+				entry-latency-us = <200>;
+				exit-latency-us = <200>;
+				min-residency-us = <800>;
+			};
+
+			CLUSTER_SLEEP: cluster-sleep {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x01010001>;
+				entry-latency-us = <250>;
+				exit-latency-us = <400>;
+				min-residency-us = <1300>;
+			};
 		};
 	};
 
@@ -255,6 +301,13 @@ pio: pinctrl@10005000 {
 			#interrupt-cells = <2>;
 		};
 
+		watchdog: watchdog@10007000 {
+			compatible = "mediatek,mt8183-wdt",
+				     "mediatek,mt6589-wdt";
+			reg = <0 0x10007000 0 0x100>;
+			#reset-cells = <1>;
+		};
+
 		apmixedsys: syscon@1000c000 {
 			compatible = "mediatek,mt8183-apmixedsys", "syscon";
 			reg = <0 0x1000c000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8516-pinfunc.h b/arch/arm64/boot/dts/mediatek/mt8516-pinfunc.h
new file mode 100644
index 0000000..73339bb
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8516-pinfunc.h
@@ -0,0 +1,663 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2019 MediaTek Inc.
+ */
+#ifndef __DTS_MT8516_PINFUNC_H
+#define __DTS_MT8516_PINFUNC_H
+
+#include <dt-bindings/pinctrl/mt65xx.h>
+
+#define MT8516_PIN_0_EINT0__FUNC_GPIO0 (MTK_PIN_NO(0) | 0)
+#define MT8516_PIN_0_EINT0__FUNC_PWM_B (MTK_PIN_NO(0) | 1)
+#define MT8516_PIN_0_EINT0__FUNC_I2S2_BCK (MTK_PIN_NO(0) | 3)
+#define MT8516_PIN_0_EINT0__FUNC_EXT_TXD0 (MTK_PIN_NO(0) | 4)
+#define MT8516_PIN_0_EINT0__FUNC_SQICS (MTK_PIN_NO(0) | 6)
+#define MT8516_PIN_0_EINT0__FUNC_DBG_MON_A_6 (MTK_PIN_NO(0) | 7)
+
+#define MT8516_PIN_1_EINT1__FUNC_GPIO1 (MTK_PIN_NO(1) | 0)
+#define MT8516_PIN_1_EINT1__FUNC_PWM_C (MTK_PIN_NO(1) | 1)
+#define MT8516_PIN_1_EINT1__FUNC_I2S2_DI (MTK_PIN_NO(1) | 3)
+#define MT8516_PIN_1_EINT1__FUNC_EXT_TXD1 (MTK_PIN_NO(1) | 4)
+#define MT8516_PIN_1_EINT1__FUNC_CONN_MCU_TDO (MTK_PIN_NO(1) | 5)
+#define MT8516_PIN_1_EINT1__FUNC_SQISO (MTK_PIN_NO(1) | 6)
+#define MT8516_PIN_1_EINT1__FUNC_DBG_MON_A_7 (MTK_PIN_NO(1) | 7)
+
+#define MT8516_PIN_2_EINT2__FUNC_GPIO2 (MTK_PIN_NO(2) | 0)
+#define MT8516_PIN_2_EINT2__FUNC_CLKM0 (MTK_PIN_NO(2) | 1)
+#define MT8516_PIN_2_EINT2__FUNC_I2S2_LRCK (MTK_PIN_NO(2) | 3)
+#define MT8516_PIN_2_EINT2__FUNC_EXT_TXD2 (MTK_PIN_NO(2) | 4)
+#define MT8516_PIN_2_EINT2__FUNC_CONN_MCU_DBGACK_N (MTK_PIN_NO(2) | 5)
+#define MT8516_PIN_2_EINT2__FUNC_SQISI (MTK_PIN_NO(2) | 6)
+#define MT8516_PIN_2_EINT2__FUNC_DBG_MON_A_8 (MTK_PIN_NO(2) | 7)
+
+#define MT8516_PIN_3_EINT3__FUNC_GPIO3 (MTK_PIN_NO(3) | 0)
+#define MT8516_PIN_3_EINT3__FUNC_CLKM1 (MTK_PIN_NO(3) | 1)
+#define MT8516_PIN_3_EINT3__FUNC_SPI_MI (MTK_PIN_NO(3) | 3)
+#define MT8516_PIN_3_EINT3__FUNC_EXT_TXD3 (MTK_PIN_NO(3) | 4)
+#define MT8516_PIN_3_EINT3__FUNC_CONN_MCU_DBGI_N (MTK_PIN_NO(3) | 5)
+#define MT8516_PIN_3_EINT3__FUNC_SQIWP (MTK_PIN_NO(3) | 6)
+#define MT8516_PIN_3_EINT3__FUNC_DBG_MON_A_9 (MTK_PIN_NO(3) | 7)
+
+#define MT8516_PIN_4_EINT4__FUNC_GPIO4 (MTK_PIN_NO(4) | 0)
+#define MT8516_PIN_4_EINT4__FUNC_CLKM2 (MTK_PIN_NO(4) | 1)
+#define MT8516_PIN_4_EINT4__FUNC_SPI_MO (MTK_PIN_NO(4) | 3)
+#define MT8516_PIN_4_EINT4__FUNC_EXT_TXC (MTK_PIN_NO(4) | 4)
+#define MT8516_PIN_4_EINT4__FUNC_CONN_MCU_TCK (MTK_PIN_NO(4) | 5)
+#define MT8516_PIN_4_EINT4__FUNC_CONN_MCU_AICE_JCKC (MTK_PIN_NO(4) | 6)
+#define MT8516_PIN_4_EINT4__FUNC_DBG_MON_A_10 (MTK_PIN_NO(4) | 7)
+
+#define MT8516_PIN_5_EINT5__FUNC_GPIO5 (MTK_PIN_NO(5) | 0)
+#define MT8516_PIN_5_EINT5__FUNC_UCTS2 (MTK_PIN_NO(5) | 1)
+#define MT8516_PIN_5_EINT5__FUNC_SPI_CSB (MTK_PIN_NO(5) | 3)
+#define MT8516_PIN_5_EINT5__FUNC_EXT_RXER (MTK_PIN_NO(5) | 4)
+#define MT8516_PIN_5_EINT5__FUNC_CONN_MCU_TDI (MTK_PIN_NO(5) | 5)
+#define MT8516_PIN_5_EINT5__FUNC_CONN_TEST_CK (MTK_PIN_NO(5) | 6)
+#define MT8516_PIN_5_EINT5__FUNC_DBG_MON_A_11 (MTK_PIN_NO(5) | 7)
+
+#define MT8516_PIN_6_EINT6__FUNC_GPIO6 (MTK_PIN_NO(6) | 0)
+#define MT8516_PIN_6_EINT6__FUNC_URTS2 (MTK_PIN_NO(6) | 1)
+#define MT8516_PIN_6_EINT6__FUNC_SPI_CLK (MTK_PIN_NO(6) | 3)
+#define MT8516_PIN_6_EINT6__FUNC_EXT_RXC (MTK_PIN_NO(6) | 4)
+#define MT8516_PIN_6_EINT6__FUNC_CONN_MCU_TRST_B (MTK_PIN_NO(6) | 5)
+#define MT8516_PIN_6_EINT6__FUNC_DBG_MON_A_12 (MTK_PIN_NO(6) | 7)
+
+#define MT8516_PIN_7_EINT7__FUNC_GPIO7 (MTK_PIN_NO(7) | 0)
+#define MT8516_PIN_7_EINT7__FUNC_SQIRST (MTK_PIN_NO(7) | 1)
+#define MT8516_PIN_7_EINT7__FUNC_SDA1_0 (MTK_PIN_NO(7) | 3)
+#define MT8516_PIN_7_EINT7__FUNC_EXT_RXDV (MTK_PIN_NO(7) | 4)
+#define MT8516_PIN_7_EINT7__FUNC_CONN_MCU_TMS (MTK_PIN_NO(7) | 5)
+#define MT8516_PIN_7_EINT7__FUNC_CONN_MCU_AICE_JMSC (MTK_PIN_NO(7) | 6)
+#define MT8516_PIN_7_EINT7__FUNC_DBG_MON_A_13 (MTK_PIN_NO(7) | 7)
+
+#define MT8516_PIN_8_EINT8__FUNC_GPIO8 (MTK_PIN_NO(8) | 0)
+#define MT8516_PIN_8_EINT8__FUNC_SQICK (MTK_PIN_NO(8) | 1)
+#define MT8516_PIN_8_EINT8__FUNC_CLKM3 (MTK_PIN_NO(8) | 2)
+#define MT8516_PIN_8_EINT8__FUNC_SCL1_0 (MTK_PIN_NO(8) | 3)
+#define MT8516_PIN_8_EINT8__FUNC_EXT_RXD0 (MTK_PIN_NO(8) | 4)
+#define MT8516_PIN_8_EINT8__FUNC_ANT_SEL0 (MTK_PIN_NO(8) | 5)
+#define MT8516_PIN_8_EINT8__FUNC_DBG_MON_A_14 (MTK_PIN_NO(8) | 7)
+
+#define MT8516_PIN_9_EINT9__FUNC_GPIO9 (MTK_PIN_NO(9) | 0)
+#define MT8516_PIN_9_EINT9__FUNC_CLKM4 (MTK_PIN_NO(9) | 1)
+#define MT8516_PIN_9_EINT9__FUNC_SDA2_0 (MTK_PIN_NO(9) | 2)
+#define MT8516_PIN_9_EINT9__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(9) | 3)
+#define MT8516_PIN_9_EINT9__FUNC_EXT_RXD1 (MTK_PIN_NO(9) | 4)
+#define MT8516_PIN_9_EINT9__FUNC_ANT_SEL1 (MTK_PIN_NO(9) | 5)
+#define MT8516_PIN_9_EINT9__FUNC_DBG_MON_A_15 (MTK_PIN_NO(9) | 7)
+
+#define MT8516_PIN_10_EINT10__FUNC_GPIO10 (MTK_PIN_NO(10) | 0)
+#define MT8516_PIN_10_EINT10__FUNC_CLKM5 (MTK_PIN_NO(10) | 1)
+#define MT8516_PIN_10_EINT10__FUNC_SCL2_0 (MTK_PIN_NO(10) | 2)
+#define MT8516_PIN_10_EINT10__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(10) | 3)
+#define MT8516_PIN_10_EINT10__FUNC_EXT_RXD2 (MTK_PIN_NO(10) | 4)
+#define MT8516_PIN_10_EINT10__FUNC_ANT_SEL2 (MTK_PIN_NO(10) | 5)
+#define MT8516_PIN_10_EINT10__FUNC_DBG_MON_A_16 (MTK_PIN_NO(10) | 7)
+
+#define MT8516_PIN_11_EINT11__FUNC_GPIO11 (MTK_PIN_NO(11) | 0)
+#define MT8516_PIN_11_EINT11__FUNC_CLKM4 (MTK_PIN_NO(11) | 1)
+#define MT8516_PIN_11_EINT11__FUNC_PWM_C (MTK_PIN_NO(11) | 2)
+#define MT8516_PIN_11_EINT11__FUNC_CONN_TEST_CK (MTK_PIN_NO(11) | 3)
+#define MT8516_PIN_11_EINT11__FUNC_ANT_SEL3 (MTK_PIN_NO(11) | 4)
+#define MT8516_PIN_11_EINT11__FUNC_EXT_RXD3 (MTK_PIN_NO(11) | 6)
+#define MT8516_PIN_11_EINT11__FUNC_DBG_MON_A_17 (MTK_PIN_NO(11) | 7)
+
+#define MT8516_PIN_12_EINT12__FUNC_GPIO12 (MTK_PIN_NO(12) | 0)
+#define MT8516_PIN_12_EINT12__FUNC_CLKM5 (MTK_PIN_NO(12) | 1)
+#define MT8516_PIN_12_EINT12__FUNC_PWM_A (MTK_PIN_NO(12) | 2)
+#define MT8516_PIN_12_EINT12__FUNC_SPDIF_OUT (MTK_PIN_NO(12) | 3)
+#define MT8516_PIN_12_EINT12__FUNC_ANT_SEL4 (MTK_PIN_NO(12) | 4)
+#define MT8516_PIN_12_EINT12__FUNC_EXT_TXEN (MTK_PIN_NO(12) | 6)
+#define MT8516_PIN_12_EINT12__FUNC_DBG_MON_A_18 (MTK_PIN_NO(12) | 7)
+
+#define MT8516_PIN_13_EINT13__FUNC_GPIO13 (MTK_PIN_NO(13) | 0)
+#define MT8516_PIN_13_EINT13__FUNC_TSF_IN (MTK_PIN_NO(13) | 3)
+#define MT8516_PIN_13_EINT13__FUNC_ANT_SEL5 (MTK_PIN_NO(13) | 4)
+#define MT8516_PIN_13_EINT13__FUNC_SPDIF_IN (MTK_PIN_NO(13) | 6)
+#define MT8516_PIN_13_EINT13__FUNC_DBG_MON_A_19 (MTK_PIN_NO(13) | 7)
+
+#define MT8516_PIN_14_EINT14__FUNC_GPIO14 (MTK_PIN_NO(14) | 0)
+#define MT8516_PIN_14_EINT14__FUNC_I2S_8CH_DO1 (MTK_PIN_NO(14) | 2)
+#define MT8516_PIN_14_EINT14__FUNC_TDM_RX_MCK (MTK_PIN_NO(14) | 3)
+#define MT8516_PIN_14_EINT14__FUNC_ANT_SEL1 (MTK_PIN_NO(14) | 4)
+#define MT8516_PIN_14_EINT14__FUNC_CONN_MCU_DBGACK_N (MTK_PIN_NO(14) | 5)
+#define MT8516_PIN_14_EINT14__FUNC_NCLE (MTK_PIN_NO(14) | 6)
+#define MT8516_PIN_14_EINT14__FUNC_DBG_MON_B_8 (MTK_PIN_NO(14) | 7)
+
+#define MT8516_PIN_15_EINT15__FUNC_GPIO15 (MTK_PIN_NO(15) | 0)
+#define MT8516_PIN_15_EINT15__FUNC_I2S_8CH_LRCK (MTK_PIN_NO(15) | 2)
+#define MT8516_PIN_15_EINT15__FUNC_TDM_RX_BCK (MTK_PIN_NO(15) | 3)
+#define MT8516_PIN_15_EINT15__FUNC_ANT_SEL2 (MTK_PIN_NO(15) | 4)
+#define MT8516_PIN_15_EINT15__FUNC_CONN_MCU_DBGI_N (MTK_PIN_NO(15) | 5)
+#define MT8516_PIN_15_EINT15__FUNC_NCEB1 (MTK_PIN_NO(15) | 6)
+#define MT8516_PIN_15_EINT15__FUNC_DBG_MON_B_9 (MTK_PIN_NO(15) | 7)
+
+#define MT8516_PIN_16_EINT16__FUNC_GPIO16 (MTK_PIN_NO(16) | 0)
+#define MT8516_PIN_16_EINT16__FUNC_I2S_8CH_BCK (MTK_PIN_NO(16) | 2)
+#define MT8516_PIN_16_EINT16__FUNC_TDM_RX_LRCK (MTK_PIN_NO(16) | 3)
+#define MT8516_PIN_16_EINT16__FUNC_ANT_SEL3 (MTK_PIN_NO(16) | 4)
+#define MT8516_PIN_16_EINT16__FUNC_CONN_MCU_TRST_B (MTK_PIN_NO(16) | 5)
+#define MT8516_PIN_16_EINT16__FUNC_NCEB0 (MTK_PIN_NO(16) | 6)
+#define MT8516_PIN_16_EINT16__FUNC_DBG_MON_B_10 (MTK_PIN_NO(16) | 7)
+
+#define MT8516_PIN_17_EINT17__FUNC_GPIO17 (MTK_PIN_NO(17) | 0)
+#define MT8516_PIN_17_EINT17__FUNC_I2S_8CH_MCK (MTK_PIN_NO(17) | 2)
+#define MT8516_PIN_17_EINT17__FUNC_TDM_RX_DI (MTK_PIN_NO(17) | 3)
+#define MT8516_PIN_17_EINT17__FUNC_IDDIG (MTK_PIN_NO(17) | 4)
+#define MT8516_PIN_17_EINT17__FUNC_ANT_SEL4 (MTK_PIN_NO(17) | 5)
+#define MT8516_PIN_17_EINT17__FUNC_NREB (MTK_PIN_NO(17) | 6)
+#define MT8516_PIN_17_EINT17__FUNC_DBG_MON_B_11 (MTK_PIN_NO(17) | 7)
+
+#define MT8516_PIN_18_EINT18__FUNC_GPIO18 (MTK_PIN_NO(18) | 0)
+#define MT8516_PIN_18_EINT18__FUNC_USB_DRVVBUS (MTK_PIN_NO(18) | 2)
+#define MT8516_PIN_18_EINT18__FUNC_I2S3_LRCK (MTK_PIN_NO(18) | 3)
+#define MT8516_PIN_18_EINT18__FUNC_CLKM1 (MTK_PIN_NO(18) | 4)
+#define MT8516_PIN_18_EINT18__FUNC_ANT_SEL3 (MTK_PIN_NO(18) | 5)
+#define MT8516_PIN_18_EINT18__FUNC_I2S2_BCK (MTK_PIN_NO(18) | 6)
+#define MT8516_PIN_18_EINT18__FUNC_DBG_MON_A_20 (MTK_PIN_NO(18) | 7)
+
+#define MT8516_PIN_19_EINT19__FUNC_GPIO19 (MTK_PIN_NO(19) | 0)
+#define MT8516_PIN_19_EINT19__FUNC_UCTS1 (MTK_PIN_NO(19) | 1)
+#define MT8516_PIN_19_EINT19__FUNC_IDDIG (MTK_PIN_NO(19) | 2)
+#define MT8516_PIN_19_EINT19__FUNC_I2S3_BCK (MTK_PIN_NO(19) | 3)
+#define MT8516_PIN_19_EINT19__FUNC_CLKM2 (MTK_PIN_NO(19) | 4)
+#define MT8516_PIN_19_EINT19__FUNC_ANT_SEL4 (MTK_PIN_NO(19) | 5)
+#define MT8516_PIN_19_EINT19__FUNC_I2S2_DI (MTK_PIN_NO(19) | 6)
+#define MT8516_PIN_19_EINT19__FUNC_DBG_MON_A_21 (MTK_PIN_NO(19) | 7)
+
+#define MT8516_PIN_20_EINT20__FUNC_GPIO20 (MTK_PIN_NO(20) | 0)
+#define MT8516_PIN_20_EINT20__FUNC_URTS1 (MTK_PIN_NO(20) | 1)
+#define MT8516_PIN_20_EINT20__FUNC_I2S3_DO (MTK_PIN_NO(20) | 3)
+#define MT8516_PIN_20_EINT20__FUNC_CLKM3 (MTK_PIN_NO(20) | 4)
+#define MT8516_PIN_20_EINT20__FUNC_ANT_SEL5 (MTK_PIN_NO(20) | 5)
+#define MT8516_PIN_20_EINT20__FUNC_I2S2_LRCK (MTK_PIN_NO(20) | 6)
+#define MT8516_PIN_20_EINT20__FUNC_DBG_MON_A_22 (MTK_PIN_NO(20) | 7)
+
+#define MT8516_PIN_21_EINT21__FUNC_GPIO21 (MTK_PIN_NO(21) | 0)
+#define MT8516_PIN_21_EINT21__FUNC_NRNB (MTK_PIN_NO(21) | 1)
+#define MT8516_PIN_21_EINT21__FUNC_ANT_SEL0 (MTK_PIN_NO(21) | 2)
+#define MT8516_PIN_21_EINT21__FUNC_I2S_8CH_DO4 (MTK_PIN_NO(21) | 3)
+#define MT8516_PIN_21_EINT21__FUNC_DBG_MON_B_31 (MTK_PIN_NO(21) | 7)
+
+#define MT8516_PIN_22_EINT22__FUNC_GPIO22 (MTK_PIN_NO(22) | 0)
+#define MT8516_PIN_22_EINT22__FUNC_I2S_8CH_DO2 (MTK_PIN_NO(22) | 2)
+#define MT8516_PIN_22_EINT22__FUNC_TSF_IN (MTK_PIN_NO(22) | 3)
+#define MT8516_PIN_22_EINT22__FUNC_USB_DRVVBUS (MTK_PIN_NO(22) | 4)
+#define MT8516_PIN_22_EINT22__FUNC_SPDIF_OUT (MTK_PIN_NO(22) | 5)
+#define MT8516_PIN_22_EINT22__FUNC_NRE_C (MTK_PIN_NO(22) | 6)
+#define MT8516_PIN_22_EINT22__FUNC_DBG_MON_B_12 (MTK_PIN_NO(22) | 7)
+
+#define MT8516_PIN_23_EINT23__FUNC_GPIO23 (MTK_PIN_NO(23) | 0)
+#define MT8516_PIN_23_EINT23__FUNC_I2S_8CH_DO3 (MTK_PIN_NO(23) | 2)
+#define MT8516_PIN_23_EINT23__FUNC_CLKM0 (MTK_PIN_NO(23) | 3)
+#define MT8516_PIN_23_EINT23__FUNC_IR (MTK_PIN_NO(23) | 4)
+#define MT8516_PIN_23_EINT23__FUNC_SPDIF_IN (MTK_PIN_NO(23) | 5)
+#define MT8516_PIN_23_EINT23__FUNC_NDQS_C (MTK_PIN_NO(23) | 6)
+#define MT8516_PIN_23_EINT23__FUNC_DBG_MON_B_13 (MTK_PIN_NO(23) | 7)
+
+#define MT8516_PIN_24_EINT24__FUNC_GPIO24 (MTK_PIN_NO(24) | 0)
+#define MT8516_PIN_24_EINT24__FUNC_ANT_SEL1 (MTK_PIN_NO(24) | 3)
+#define MT8516_PIN_24_EINT24__FUNC_UCTS2 (MTK_PIN_NO(24) | 4)
+#define MT8516_PIN_24_EINT24__FUNC_PWM_A (MTK_PIN_NO(24) | 5)
+#define MT8516_PIN_24_EINT24__FUNC_I2S0_MCK (MTK_PIN_NO(24) | 6)
+#define MT8516_PIN_24_EINT24__FUNC_DBG_MON_A_0 (MTK_PIN_NO(24) | 7)
+
+#define MT8516_PIN_25_EINT25__FUNC_GPIO25 (MTK_PIN_NO(25) | 0)
+#define MT8516_PIN_25_EINT25__FUNC_ANT_SEL0 (MTK_PIN_NO(25) | 3)
+#define MT8516_PIN_25_EINT25__FUNC_URTS2 (MTK_PIN_NO(25) | 4)
+#define MT8516_PIN_25_EINT25__FUNC_PWM_B (MTK_PIN_NO(25) | 5)
+#define MT8516_PIN_25_EINT25__FUNC_I2S_8CH_MCK (MTK_PIN_NO(25) | 6)
+#define MT8516_PIN_25_EINT25__FUNC_DBG_MON_A_1 (MTK_PIN_NO(25) | 7)
+
+#define MT8516_PIN_26_PWRAP_SPI0_MI__FUNC_GPIO26 (MTK_PIN_NO(26) | 0)
+#define MT8516_PIN_26_PWRAP_SPI0_MI__FUNC_PWRAP_SPI0_MO (MTK_PIN_NO(26) | 1)
+#define MT8516_PIN_26_PWRAP_SPI0_MI__FUNC_PWRAP_SPI0_MI (MTK_PIN_NO(26) | 2)
+
+#define MT8516_PIN_27_PWRAP_SPI0_MO__FUNC_GPIO27 (MTK_PIN_NO(27) | 0)
+#define MT8516_PIN_27_PWRAP_SPI0_MO__FUNC_PWRAP_SPI0_MI (MTK_PIN_NO(27) | 1)
+#define MT8516_PIN_27_PWRAP_SPI0_MO__FUNC_PWRAP_SPI0_MO (MTK_PIN_NO(27) | 2)
+
+#define MT8516_PIN_28_PWRAP_INT__FUNC_GPIO28 (MTK_PIN_NO(28) | 0)
+#define MT8516_PIN_28_PWRAP_INT__FUNC_I2S0_MCK (MTK_PIN_NO(28) | 1)
+#define MT8516_PIN_28_PWRAP_INT__FUNC_I2S_8CH_MCK (MTK_PIN_NO(28) | 4)
+#define MT8516_PIN_28_PWRAP_INT__FUNC_I2S2_MCK (MTK_PIN_NO(28) | 5)
+#define MT8516_PIN_28_PWRAP_INT__FUNC_I2S3_MCK (MTK_PIN_NO(28) | 6)
+
+#define MT8516_PIN_29_PWRAP_SPI0_CK__FUNC_GPIO29 (MTK_PIN_NO(29) | 0)
+#define MT8516_PIN_29_PWRAP_SPI0_CK__FUNC_PWRAP_SPI0_CK (MTK_PIN_NO(29) | 1)
+
+#define MT8516_PIN_30_PWRAP_SPI0_CSN__FUNC_GPIO30 (MTK_PIN_NO(30) | 0)
+#define MT8516_PIN_30_PWRAP_SPI0_CSN__FUNC_PWRAP_SPI0_CSN (MTK_PIN_NO(30) | 1)
+
+#define MT8516_PIN_31_RTC32K_CK__FUNC_GPIO31 (MTK_PIN_NO(31) | 0)
+#define MT8516_PIN_31_RTC32K_CK__FUNC_RTC32K_CK (MTK_PIN_NO(31) | 1)
+
+#define MT8516_PIN_32_WATCHDOG__FUNC_GPIO32 (MTK_PIN_NO(32) | 0)
+#define MT8516_PIN_32_WATCHDOG__FUNC_WATCHDOG (MTK_PIN_NO(32) | 1)
+
+#define MT8516_PIN_33_SRCLKENA__FUNC_GPIO33 (MTK_PIN_NO(33) | 0)
+#define MT8516_PIN_33_SRCLKENA__FUNC_SRCLKENA0 (MTK_PIN_NO(33) | 1)
+
+#define MT8516_PIN_34_URXD2__FUNC_GPIO34 (MTK_PIN_NO(34) | 0)
+#define MT8516_PIN_34_URXD2__FUNC_URXD2 (MTK_PIN_NO(34) | 1)
+#define MT8516_PIN_34_URXD2__FUNC_UTXD2 (MTK_PIN_NO(34) | 3)
+#define MT8516_PIN_34_URXD2__FUNC_DBG_SCL (MTK_PIN_NO(34) | 4)
+#define MT8516_PIN_34_URXD2__FUNC_I2S2_MCK (MTK_PIN_NO(34) | 6)
+#define MT8516_PIN_34_URXD2__FUNC_DBG_MON_B_0 (MTK_PIN_NO(34) | 7)
+
+#define MT8516_PIN_35_UTXD2__FUNC_GPIO35 (MTK_PIN_NO(35) | 0)
+#define MT8516_PIN_35_UTXD2__FUNC_UTXD2 (MTK_PIN_NO(35) | 1)
+#define MT8516_PIN_35_UTXD2__FUNC_URXD2 (MTK_PIN_NO(35) | 3)
+#define MT8516_PIN_35_UTXD2__FUNC_DBG_SDA (MTK_PIN_NO(35) | 4)
+#define MT8516_PIN_35_UTXD2__FUNC_I2S3_MCK (MTK_PIN_NO(35) | 6)
+#define MT8516_PIN_35_UTXD2__FUNC_DBG_MON_B_1 (MTK_PIN_NO(35) | 7)
+
+#define MT8516_PIN_36_MRG_CLK__FUNC_GPIO36 (MTK_PIN_NO(36) | 0)
+#define MT8516_PIN_36_MRG_CLK__FUNC_MRG_CLK (MTK_PIN_NO(36) | 1)
+#define MT8516_PIN_36_MRG_CLK__FUNC_I2S0_BCK (MTK_PIN_NO(36) | 3)
+#define MT8516_PIN_36_MRG_CLK__FUNC_I2S3_BCK (MTK_PIN_NO(36) | 4)
+#define MT8516_PIN_36_MRG_CLK__FUNC_PCM0_CLK (MTK_PIN_NO(36) | 5)
+#define MT8516_PIN_36_MRG_CLK__FUNC_IR (MTK_PIN_NO(36) | 6)
+#define MT8516_PIN_36_MRG_CLK__FUNC_DBG_MON_A_2 (MTK_PIN_NO(36) | 7)
+
+#define MT8516_PIN_37_MRG_SYNC__FUNC_GPIO37 (MTK_PIN_NO(37) | 0)
+#define MT8516_PIN_37_MRG_SYNC__FUNC_MRG_SYNC (MTK_PIN_NO(37) | 1)
+#define MT8516_PIN_37_MRG_SYNC__FUNC_I2S0_LRCK (MTK_PIN_NO(37) | 3)
+#define MT8516_PIN_37_MRG_SYNC__FUNC_I2S3_LRCK (MTK_PIN_NO(37) | 4)
+#define MT8516_PIN_37_MRG_SYNC__FUNC_PCM0_SYNC (MTK_PIN_NO(37) | 5)
+#define MT8516_PIN_37_MRG_SYNC__FUNC_EXT_COL (MTK_PIN_NO(37) | 6)
+#define MT8516_PIN_37_MRG_SYNC__FUNC_DBG_MON_A_3 (MTK_PIN_NO(37) | 7)
+
+#define MT8516_PIN_38_MRG_DI__FUNC_GPIO38 (MTK_PIN_NO(38) | 0)
+#define MT8516_PIN_38_MRG_DI__FUNC_MRG_DI (MTK_PIN_NO(38) | 1)
+#define MT8516_PIN_38_MRG_DI__FUNC_I2S0_DI (MTK_PIN_NO(38) | 3)
+#define MT8516_PIN_38_MRG_DI__FUNC_I2S3_DO (MTK_PIN_NO(38) | 4)
+#define MT8516_PIN_38_MRG_DI__FUNC_PCM0_DI (MTK_PIN_NO(38) | 5)
+#define MT8516_PIN_38_MRG_DI__FUNC_EXT_MDIO (MTK_PIN_NO(38) | 6)
+#define MT8516_PIN_38_MRG_DI__FUNC_DBG_MON_A_4 (MTK_PIN_NO(38) | 7)
+
+#define MT8516_PIN_39_MRG_DO__FUNC_GPIO39 (MTK_PIN_NO(39) | 0)
+#define MT8516_PIN_39_MRG_DO__FUNC_MRG_DO (MTK_PIN_NO(39) | 1)
+#define MT8516_PIN_39_MRG_DO__FUNC_I2S0_MCK (MTK_PIN_NO(39) | 3)
+#define MT8516_PIN_39_MRG_DO__FUNC_I2S3_MCK (MTK_PIN_NO(39) | 4)
+#define MT8516_PIN_39_MRG_DO__FUNC_PCM0_DO (MTK_PIN_NO(39) | 5)
+#define MT8516_PIN_39_MRG_DO__FUNC_EXT_MDC (MTK_PIN_NO(39) | 6)
+#define MT8516_PIN_39_MRG_DO__FUNC_DBG_MON_A_5 (MTK_PIN_NO(39) | 7)
+
+#define MT8516_PIN_40_KPROW0__FUNC_GPIO40 (MTK_PIN_NO(40) | 0)
+#define MT8516_PIN_40_KPROW0__FUNC_KPROW0 (MTK_PIN_NO(40) | 1)
+#define MT8516_PIN_40_KPROW0__FUNC_DBG_MON_B_4 (MTK_PIN_NO(40) | 7)
+
+#define MT8516_PIN_41_KPROW1__FUNC_GPIO41 (MTK_PIN_NO(41) | 0)
+#define MT8516_PIN_41_KPROW1__FUNC_KPROW1 (MTK_PIN_NO(41) | 1)
+#define MT8516_PIN_41_KPROW1__FUNC_IDDIG (MTK_PIN_NO(41) | 2)
+#define MT8516_PIN_41_KPROW1__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(41) | 3)
+#define MT8516_PIN_41_KPROW1__FUNC_DBG_MON_B_5 (MTK_PIN_NO(41) | 7)
+
+#define MT8516_PIN_42_KPCOL0__FUNC_GPIO42 (MTK_PIN_NO(42) | 0)
+#define MT8516_PIN_42_KPCOL0__FUNC_KPCOL0 (MTK_PIN_NO(42) | 1)
+#define MT8516_PIN_42_KPCOL0__FUNC_DBG_MON_B_6 (MTK_PIN_NO(42) | 7)
+
+#define MT8516_PIN_43_KPCOL1__FUNC_GPIO43 (MTK_PIN_NO(43) | 0)
+#define MT8516_PIN_43_KPCOL1__FUNC_KPCOL1 (MTK_PIN_NO(43) | 1)
+#define MT8516_PIN_43_KPCOL1__FUNC_USB_DRVVBUS (MTK_PIN_NO(43) | 2)
+#define MT8516_PIN_43_KPCOL1__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(43) | 3)
+#define MT8516_PIN_43_KPCOL1__FUNC_TSF_IN (MTK_PIN_NO(43) | 4)
+#define MT8516_PIN_43_KPCOL1__FUNC_DBG_MON_B_7 (MTK_PIN_NO(43) | 7)
+
+#define MT8516_PIN_44_JTMS__FUNC_GPIO44 (MTK_PIN_NO(44) | 0)
+#define MT8516_PIN_44_JTMS__FUNC_JTMS (MTK_PIN_NO(44) | 1)
+#define MT8516_PIN_44_JTMS__FUNC_CONN_MCU_TMS (MTK_PIN_NO(44) | 2)
+#define MT8516_PIN_44_JTMS__FUNC_CONN_MCU_AICE_JMSC (MTK_PIN_NO(44) | 3)
+#define MT8516_PIN_44_JTMS__FUNC_DFD_TMS_XI (MTK_PIN_NO(44) | 5)
+#define MT8516_PIN_44_JTMS__FUNC_UDI_TMS_XI (MTK_PIN_NO(44) | 6)
+
+#define MT8516_PIN_45_JTCK__FUNC_GPIO45 (MTK_PIN_NO(45) | 0)
+#define MT8516_PIN_45_JTCK__FUNC_JTCK (MTK_PIN_NO(45) | 1)
+#define MT8516_PIN_45_JTCK__FUNC_CONN_MCU_TCK (MTK_PIN_NO(45) | 2)
+#define MT8516_PIN_45_JTCK__FUNC_CONN_MCU_AICE_JCKC (MTK_PIN_NO(45) | 3)
+
+#define MT8516_PIN_46_JTDI__FUNC_GPIO46 (MTK_PIN_NO(46) | 0)
+#define MT8516_PIN_46_JTDI__FUNC_JTDI (MTK_PIN_NO(46) | 1)
+#define MT8516_PIN_46_JTDI__FUNC_CONN_MCU_TDI (MTK_PIN_NO(46) | 2)
+
+#define MT8516_PIN_47_JTDO__FUNC_GPIO47 (MTK_PIN_NO(47) | 0)
+#define MT8516_PIN_47_JTDO__FUNC_JTDO (MTK_PIN_NO(47) | 1)
+#define MT8516_PIN_47_JTDO__FUNC_CONN_MCU_TDO (MTK_PIN_NO(47) | 2)
+
+#define MT8516_PIN_48_SPI_CS__FUNC_GPIO48 (MTK_PIN_NO(48) | 0)
+#define MT8516_PIN_48_SPI_CS__FUNC_SPI_CSB (MTK_PIN_NO(48) | 1)
+#define MT8516_PIN_48_SPI_CS__FUNC_I2S0_DI (MTK_PIN_NO(48) | 3)
+#define MT8516_PIN_48_SPI_CS__FUNC_I2S2_BCK (MTK_PIN_NO(48) | 4)
+#define MT8516_PIN_48_SPI_CS__FUNC_DBG_MON_A_23 (MTK_PIN_NO(48) | 7)
+
+#define MT8516_PIN_49_SPI_CK__FUNC_GPIO49 (MTK_PIN_NO(49) | 0)
+#define MT8516_PIN_49_SPI_CK__FUNC_SPI_CLK (MTK_PIN_NO(49) | 1)
+#define MT8516_PIN_49_SPI_CK__FUNC_I2S0_LRCK (MTK_PIN_NO(49) | 3)
+#define MT8516_PIN_49_SPI_CK__FUNC_I2S2_DI (MTK_PIN_NO(49) | 4)
+#define MT8516_PIN_49_SPI_CK__FUNC_DBG_MON_A_24 (MTK_PIN_NO(49) | 7)
+
+#define MT8516_PIN_50_SPI_MI__FUNC_GPIO50 (MTK_PIN_NO(50) | 0)
+#define MT8516_PIN_50_SPI_MI__FUNC_SPI_MI (MTK_PIN_NO(50) | 1)
+#define MT8516_PIN_50_SPI_MI__FUNC_SPI_MO (MTK_PIN_NO(50) | 2)
+#define MT8516_PIN_50_SPI_MI__FUNC_I2S0_BCK (MTK_PIN_NO(50) | 3)
+#define MT8516_PIN_50_SPI_MI__FUNC_I2S2_LRCK (MTK_PIN_NO(50) | 4)
+#define MT8516_PIN_50_SPI_MI__FUNC_DBG_MON_A_25 (MTK_PIN_NO(50) | 7)
+
+#define MT8516_PIN_51_SPI_MO__FUNC_GPIO51 (MTK_PIN_NO(51) | 0)
+#define MT8516_PIN_51_SPI_MO__FUNC_SPI_MO (MTK_PIN_NO(51) | 1)
+#define MT8516_PIN_51_SPI_MO__FUNC_SPI_MI (MTK_PIN_NO(51) | 2)
+#define MT8516_PIN_51_SPI_MO__FUNC_I2S0_MCK (MTK_PIN_NO(51) | 3)
+#define MT8516_PIN_51_SPI_MO__FUNC_I2S2_MCK (MTK_PIN_NO(51) | 4)
+#define MT8516_PIN_51_SPI_MO__FUNC_DBG_MON_A_26 (MTK_PIN_NO(51) | 7)
+
+#define MT8516_PIN_52_SDA1__FUNC_GPIO52 (MTK_PIN_NO(52) | 0)
+#define MT8516_PIN_52_SDA1__FUNC_SDA1_0 (MTK_PIN_NO(52) | 1)
+
+#define MT8516_PIN_53_SCL1__FUNC_GPIO53 (MTK_PIN_NO(53) | 0)
+#define MT8516_PIN_53_SCL1__FUNC_SCL1_0 (MTK_PIN_NO(53) | 1)
+
+#define MT8516_PIN_54_GPIO54__FUNC_GPIO54 (MTK_PIN_NO(54) | 0)
+#define MT8516_PIN_54_GPIO54__FUNC_PWM_B (MTK_PIN_NO(54) | 2)
+#define MT8516_PIN_54_GPIO54__FUNC_DBG_MON_B_2 (MTK_PIN_NO(54) | 7)
+
+#define MT8516_PIN_55_I2S_DATA_IN__FUNC_GPIO55 (MTK_PIN_NO(55) | 0)
+#define MT8516_PIN_55_I2S_DATA_IN__FUNC_I2S0_DI (MTK_PIN_NO(55) | 1)
+#define MT8516_PIN_55_I2S_DATA_IN__FUNC_UCTS0 (MTK_PIN_NO(55) | 2)
+#define MT8516_PIN_55_I2S_DATA_IN__FUNC_I2S3_DO (MTK_PIN_NO(55) | 3)
+#define MT8516_PIN_55_I2S_DATA_IN__FUNC_I2S_8CH_DO1 (MTK_PIN_NO(55) | 4)
+#define MT8516_PIN_55_I2S_DATA_IN__FUNC_PWM_A (MTK_PIN_NO(55) | 5)
+#define MT8516_PIN_55_I2S_DATA_IN__FUNC_I2S2_BCK (MTK_PIN_NO(55) | 6)
+#define MT8516_PIN_55_I2S_DATA_IN__FUNC_DBG_MON_A_28 (MTK_PIN_NO(55) | 7)
+
+#define MT8516_PIN_56_I2S_LRCK__FUNC_GPIO56 (MTK_PIN_NO(56) | 0)
+#define MT8516_PIN_56_I2S_LRCK__FUNC_I2S0_LRCK (MTK_PIN_NO(56) | 1)
+#define MT8516_PIN_56_I2S_LRCK__FUNC_I2S3_LRCK (MTK_PIN_NO(56) | 3)
+#define MT8516_PIN_56_I2S_LRCK__FUNC_I2S_8CH_LRCK (MTK_PIN_NO(56) | 4)
+#define MT8516_PIN_56_I2S_LRCK__FUNC_PWM_B (MTK_PIN_NO(56) | 5)
+#define MT8516_PIN_56_I2S_LRCK__FUNC_I2S2_DI (MTK_PIN_NO(56) | 6)
+#define MT8516_PIN_56_I2S_LRCK__FUNC_DBG_MON_A_29 (MTK_PIN_NO(56) | 7)
+
+#define MT8516_PIN_57_I2S_BCK__FUNC_GPIO57 (MTK_PIN_NO(57) | 0)
+#define MT8516_PIN_57_I2S_BCK__FUNC_I2S0_BCK (MTK_PIN_NO(57) | 1)
+#define MT8516_PIN_57_I2S_BCK__FUNC_URTS0 (MTK_PIN_NO(57) | 2)
+#define MT8516_PIN_57_I2S_BCK__FUNC_I2S3_BCK (MTK_PIN_NO(57) | 3)
+#define MT8516_PIN_57_I2S_BCK__FUNC_I2S_8CH_BCK (MTK_PIN_NO(57) | 4)
+#define MT8516_PIN_57_I2S_BCK__FUNC_PWM_C (MTK_PIN_NO(57) | 5)
+#define MT8516_PIN_57_I2S_BCK__FUNC_I2S2_LRCK (MTK_PIN_NO(57) | 6)
+#define MT8516_PIN_57_I2S_BCK__FUNC_DBG_MON_A_30 (MTK_PIN_NO(57) | 7)
+
+#define MT8516_PIN_58_SDA0__FUNC_GPIO58 (MTK_PIN_NO(58) | 0)
+#define MT8516_PIN_58_SDA0__FUNC_SDA0_0 (MTK_PIN_NO(58) | 1)
+
+#define MT8516_PIN_59_SCL0__FUNC_GPIO59 (MTK_PIN_NO(59) | 0)
+#define MT8516_PIN_59_SCL0__FUNC_SCL0_0 (MTK_PIN_NO(59) | 1)
+
+#define MT8516_PIN_60_SDA2__FUNC_GPIO60 (MTK_PIN_NO(60) | 0)
+#define MT8516_PIN_60_SDA2__FUNC_SDA2_0 (MTK_PIN_NO(60) | 1)
+#define MT8516_PIN_60_SDA2__FUNC_PWM_B (MTK_PIN_NO(60) | 2)
+
+#define MT8516_PIN_61_SCL2__FUNC_GPIO61 (MTK_PIN_NO(61) | 0)
+#define MT8516_PIN_61_SCL2__FUNC_SCL2_0 (MTK_PIN_NO(61) | 1)
+#define MT8516_PIN_61_SCL2__FUNC_PWM_C (MTK_PIN_NO(61) | 2)
+
+#define MT8516_PIN_62_URXD0__FUNC_GPIO62 (MTK_PIN_NO(62) | 0)
+#define MT8516_PIN_62_URXD0__FUNC_URXD0 (MTK_PIN_NO(62) | 1)
+#define MT8516_PIN_62_URXD0__FUNC_UTXD0 (MTK_PIN_NO(62) | 2)
+
+#define MT8516_PIN_63_UTXD0__FUNC_GPIO63 (MTK_PIN_NO(63) | 0)
+#define MT8516_PIN_63_UTXD0__FUNC_UTXD0 (MTK_PIN_NO(63) | 1)
+#define MT8516_PIN_63_UTXD0__FUNC_URXD0 (MTK_PIN_NO(63) | 2)
+
+#define MT8516_PIN_64_URXD1__FUNC_GPIO64 (MTK_PIN_NO(64) | 0)
+#define MT8516_PIN_64_URXD1__FUNC_URXD1 (MTK_PIN_NO(64) | 1)
+#define MT8516_PIN_64_URXD1__FUNC_UTXD1 (MTK_PIN_NO(64) | 2)
+#define MT8516_PIN_64_URXD1__FUNC_DBG_MON_A_27 (MTK_PIN_NO(64) | 7)
+
+#define MT8516_PIN_65_UTXD1__FUNC_GPIO65 (MTK_PIN_NO(65) | 0)
+#define MT8516_PIN_65_UTXD1__FUNC_UTXD1 (MTK_PIN_NO(65) | 1)
+#define MT8516_PIN_65_UTXD1__FUNC_URXD1 (MTK_PIN_NO(65) | 2)
+#define MT8516_PIN_65_UTXD1__FUNC_DBG_MON_A_31 (MTK_PIN_NO(65) | 7)
+
+#define MT8516_PIN_68_MSDC2_CMD__FUNC_GPIO68 (MTK_PIN_NO(68) | 0)
+#define MT8516_PIN_68_MSDC2_CMD__FUNC_MSDC2_CMD (MTK_PIN_NO(68) | 1)
+#define MT8516_PIN_68_MSDC2_CMD__FUNC_I2S_8CH_DO4 (MTK_PIN_NO(68) | 2)
+#define MT8516_PIN_68_MSDC2_CMD__FUNC_SDA1_0 (MTK_PIN_NO(68) | 3)
+#define MT8516_PIN_68_MSDC2_CMD__FUNC_USB_SDA (MTK_PIN_NO(68) | 5)
+#define MT8516_PIN_68_MSDC2_CMD__FUNC_I2S3_BCK (MTK_PIN_NO(68) | 6)
+#define MT8516_PIN_68_MSDC2_CMD__FUNC_DBG_MON_B_15 (MTK_PIN_NO(68) | 7)
+
+#define MT8516_PIN_69_MSDC2_CLK__FUNC_GPIO69 (MTK_PIN_NO(69) | 0)
+#define MT8516_PIN_69_MSDC2_CLK__FUNC_MSDC2_CLK (MTK_PIN_NO(69) | 1)
+#define MT8516_PIN_69_MSDC2_CLK__FUNC_I2S_8CH_DO3 (MTK_PIN_NO(69) | 2)
+#define MT8516_PIN_69_MSDC2_CLK__FUNC_SCL1_0 (MTK_PIN_NO(69) | 3)
+#define MT8516_PIN_69_MSDC2_CLK__FUNC_USB_SCL (MTK_PIN_NO(69) | 5)
+#define MT8516_PIN_69_MSDC2_CLK__FUNC_I2S3_LRCK (MTK_PIN_NO(69) | 6)
+#define MT8516_PIN_69_MSDC2_CLK__FUNC_DBG_MON_B_16 (MTK_PIN_NO(69) | 7)
+
+#define MT8516_PIN_70_MSDC2_DAT0__FUNC_GPIO70 (MTK_PIN_NO(70) | 0)
+#define MT8516_PIN_70_MSDC2_DAT0__FUNC_MSDC2_DAT0 (MTK_PIN_NO(70) | 1)
+#define MT8516_PIN_70_MSDC2_DAT0__FUNC_I2S_8CH_DO2 (MTK_PIN_NO(70) | 2)
+#define MT8516_PIN_70_MSDC2_DAT0__FUNC_UTXD0 (MTK_PIN_NO(70) | 5)
+#define MT8516_PIN_70_MSDC2_DAT0__FUNC_I2S3_DO (MTK_PIN_NO(70) | 6)
+#define MT8516_PIN_70_MSDC2_DAT0__FUNC_DBG_MON_B_17 (MTK_PIN_NO(70) | 7)
+
+#define MT8516_PIN_71_MSDC2_DAT1__FUNC_GPIO71 (MTK_PIN_NO(71) | 0)
+#define MT8516_PIN_71_MSDC2_DAT1__FUNC_MSDC2_DAT1 (MTK_PIN_NO(71) | 1)
+#define MT8516_PIN_71_MSDC2_DAT1__FUNC_I2S_8CH_DO1 (MTK_PIN_NO(71) | 2)
+#define MT8516_PIN_71_MSDC2_DAT1__FUNC_PWM_A (MTK_PIN_NO(71) | 3)
+#define MT8516_PIN_71_MSDC2_DAT1__FUNC_I2S3_MCK (MTK_PIN_NO(71) | 4)
+#define MT8516_PIN_71_MSDC2_DAT1__FUNC_URXD0 (MTK_PIN_NO(71) | 5)
+#define MT8516_PIN_71_MSDC2_DAT1__FUNC_PWM_B (MTK_PIN_NO(71) | 6)
+#define MT8516_PIN_71_MSDC2_DAT1__FUNC_DBG_MON_B_18 (MTK_PIN_NO(71) | 7)
+
+#define MT8516_PIN_72_MSDC2_DAT2__FUNC_GPIO72 (MTK_PIN_NO(72) | 0)
+#define MT8516_PIN_72_MSDC2_DAT2__FUNC_MSDC2_DAT2 (MTK_PIN_NO(72) | 1)
+#define MT8516_PIN_72_MSDC2_DAT2__FUNC_I2S_8CH_LRCK (MTK_PIN_NO(72) | 2)
+#define MT8516_PIN_72_MSDC2_DAT2__FUNC_SDA2_0 (MTK_PIN_NO(72) | 3)
+#define MT8516_PIN_72_MSDC2_DAT2__FUNC_UTXD1 (MTK_PIN_NO(72) | 5)
+#define MT8516_PIN_72_MSDC2_DAT2__FUNC_PWM_C (MTK_PIN_NO(72) | 6)
+#define MT8516_PIN_72_MSDC2_DAT2__FUNC_DBG_MON_B_19 (MTK_PIN_NO(72) | 7)
+
+#define MT8516_PIN_73_MSDC2_DAT3__FUNC_GPIO73 (MTK_PIN_NO(73) | 0)
+#define MT8516_PIN_73_MSDC2_DAT3__FUNC_MSDC2_DAT3 (MTK_PIN_NO(73) | 1)
+#define MT8516_PIN_73_MSDC2_DAT3__FUNC_I2S_8CH_BCK (MTK_PIN_NO(73) | 2)
+#define MT8516_PIN_73_MSDC2_DAT3__FUNC_SCL2_0 (MTK_PIN_NO(73) | 3)
+#define MT8516_PIN_73_MSDC2_DAT3__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(73) | 4)
+#define MT8516_PIN_73_MSDC2_DAT3__FUNC_URXD1 (MTK_PIN_NO(73) | 5)
+#define MT8516_PIN_73_MSDC2_DAT3__FUNC_PWM_A (MTK_PIN_NO(73) | 6)
+#define MT8516_PIN_73_MSDC2_DAT3__FUNC_DBG_MON_B_20 (MTK_PIN_NO(73) | 7)
+
+#define MT8516_PIN_74_TDN3__FUNC_GPI74 (MTK_PIN_NO(74) | 0)
+#define MT8516_PIN_74_TDN3__FUNC_TDN3 (MTK_PIN_NO(74) | 1)
+
+#define MT8516_PIN_75_TDP3__FUNC_GPI75 (MTK_PIN_NO(75) | 0)
+#define MT8516_PIN_75_TDP3__FUNC_TDP3 (MTK_PIN_NO(75) | 1)
+
+#define MT8516_PIN_76_TDN2__FUNC_GPI76 (MTK_PIN_NO(76) | 0)
+#define MT8516_PIN_76_TDN2__FUNC_TDN2 (MTK_PIN_NO(76) | 1)
+
+#define MT8516_PIN_77_TDP2__FUNC_GPI77 (MTK_PIN_NO(77) | 0)
+#define MT8516_PIN_77_TDP2__FUNC_TDP2 (MTK_PIN_NO(77) | 1)
+
+#define MT8516_PIN_78_TCN__FUNC_GPI78 (MTK_PIN_NO(78) | 0)
+#define MT8516_PIN_78_TCN__FUNC_TCN (MTK_PIN_NO(78) | 1)
+
+#define MT8516_PIN_79_TCP__FUNC_GPI79 (MTK_PIN_NO(79) | 0)
+#define MT8516_PIN_79_TCP__FUNC_TCP (MTK_PIN_NO(79) | 1)
+
+#define MT8516_PIN_80_TDN1__FUNC_GPI80 (MTK_PIN_NO(80) | 0)
+#define MT8516_PIN_80_TDN1__FUNC_TDN1 (MTK_PIN_NO(80) | 1)
+
+#define MT8516_PIN_81_TDP1__FUNC_GPI81 (MTK_PIN_NO(81) | 0)
+#define MT8516_PIN_81_TDP1__FUNC_TDP1 (MTK_PIN_NO(81) | 1)
+
+#define MT8516_PIN_82_TDN0__FUNC_GPI82 (MTK_PIN_NO(82) | 0)
+#define MT8516_PIN_82_TDN0__FUNC_TDN0 (MTK_PIN_NO(82) | 1)
+
+#define MT8516_PIN_83_TDP0__FUNC_GPI83 (MTK_PIN_NO(83) | 0)
+#define MT8516_PIN_83_TDP0__FUNC_TDP0 (MTK_PIN_NO(83) | 1)
+
+#define MT8516_PIN_84_RDN0__FUNC_GPI84 (MTK_PIN_NO(84) | 0)
+#define MT8516_PIN_84_RDN0__FUNC_RDN0 (MTK_PIN_NO(84) | 1)
+
+#define MT8516_PIN_85_RDP0__FUNC_GPI85 (MTK_PIN_NO(85) | 0)
+#define MT8516_PIN_85_RDP0__FUNC_RDP0 (MTK_PIN_NO(85) | 1)
+
+#define MT8516_PIN_86_RDN1__FUNC_GPI86 (MTK_PIN_NO(86) | 0)
+#define MT8516_PIN_86_RDN1__FUNC_RDN1 (MTK_PIN_NO(86) | 1)
+
+#define MT8516_PIN_87_RDP1__FUNC_GPI87 (MTK_PIN_NO(87) | 0)
+#define MT8516_PIN_87_RDP1__FUNC_RDP1 (MTK_PIN_NO(87) | 1)
+
+#define MT8516_PIN_88_RCN__FUNC_GPI88 (MTK_PIN_NO(88) | 0)
+#define MT8516_PIN_88_RCN__FUNC_RCN (MTK_PIN_NO(88) | 1)
+
+#define MT8516_PIN_89_RCP__FUNC_GPI89 (MTK_PIN_NO(89) | 0)
+#define MT8516_PIN_89_RCP__FUNC_RCP (MTK_PIN_NO(89) | 1)
+
+#define MT8516_PIN_90_RDN2__FUNC_GPI90 (MTK_PIN_NO(90) | 0)
+#define MT8516_PIN_90_RDN2__FUNC_RDN2 (MTK_PIN_NO(90) | 1)
+#define MT8516_PIN_90_RDN2__FUNC_CMDAT8 (MTK_PIN_NO(90) | 2)
+
+#define MT8516_PIN_91_RDP2__FUNC_GPI91 (MTK_PIN_NO(91) | 0)
+#define MT8516_PIN_91_RDP2__FUNC_RDP2 (MTK_PIN_NO(91) | 1)
+#define MT8516_PIN_91_RDP2__FUNC_CMDAT9 (MTK_PIN_NO(91) | 2)
+
+#define MT8516_PIN_92_RDN3__FUNC_GPI92 (MTK_PIN_NO(92) | 0)
+#define MT8516_PIN_92_RDN3__FUNC_RDN3 (MTK_PIN_NO(92) | 1)
+#define MT8516_PIN_92_RDN3__FUNC_CMDAT4 (MTK_PIN_NO(92) | 2)
+
+#define MT8516_PIN_93_RDP3__FUNC_GPI93 (MTK_PIN_NO(93) | 0)
+#define MT8516_PIN_93_RDP3__FUNC_RDP3 (MTK_PIN_NO(93) | 1)
+#define MT8516_PIN_93_RDP3__FUNC_CMDAT5 (MTK_PIN_NO(93) | 2)
+
+#define MT8516_PIN_94_RCN_A__FUNC_GPI94 (MTK_PIN_NO(94) | 0)
+#define MT8516_PIN_94_RCN_A__FUNC_RCN_A (MTK_PIN_NO(94) | 1)
+#define MT8516_PIN_94_RCN_A__FUNC_CMDAT6 (MTK_PIN_NO(94) | 2)
+
+#define MT8516_PIN_95_RCP_A__FUNC_GPI95 (MTK_PIN_NO(95) | 0)
+#define MT8516_PIN_95_RCP_A__FUNC_RCP_A (MTK_PIN_NO(95) | 1)
+#define MT8516_PIN_95_RCP_A__FUNC_CMDAT7 (MTK_PIN_NO(95) | 2)
+
+#define MT8516_PIN_96_RDN1_A__FUNC_GPI96 (MTK_PIN_NO(96) | 0)
+#define MT8516_PIN_96_RDN1_A__FUNC_RDN1_A (MTK_PIN_NO(96) | 1)
+#define MT8516_PIN_96_RDN1_A__FUNC_CMDAT2 (MTK_PIN_NO(96) | 2)
+#define MT8516_PIN_96_RDN1_A__FUNC_CMCSD2 (MTK_PIN_NO(96) | 3)
+
+#define MT8516_PIN_97_RDP1_A__FUNC_GPI97 (MTK_PIN_NO(97) | 0)
+#define MT8516_PIN_97_RDP1_A__FUNC_RDP1_A (MTK_PIN_NO(97) | 1)
+#define MT8516_PIN_97_RDP1_A__FUNC_CMDAT3 (MTK_PIN_NO(97) | 2)
+#define MT8516_PIN_97_RDP1_A__FUNC_CMCSD3 (MTK_PIN_NO(97) | 3)
+
+#define MT8516_PIN_98_RDN0_A__FUNC_GPI98 (MTK_PIN_NO(98) | 0)
+#define MT8516_PIN_98_RDN0_A__FUNC_RDN0_A (MTK_PIN_NO(98) | 1)
+#define MT8516_PIN_98_RDN0_A__FUNC_CMHSYNC (MTK_PIN_NO(98) | 2)
+
+#define MT8516_PIN_99_RDP0_A__FUNC_GPI99 (MTK_PIN_NO(99) | 0)
+#define MT8516_PIN_99_RDP0_A__FUNC_RDP0_A (MTK_PIN_NO(99) | 1)
+#define MT8516_PIN_99_RDP0_A__FUNC_CMVSYNC (MTK_PIN_NO(99) | 2)
+
+#define MT8516_PIN_100_CMDAT0__FUNC_GPIO100 (MTK_PIN_NO(100) | 0)
+#define MT8516_PIN_100_CMDAT0__FUNC_CMDAT0 (MTK_PIN_NO(100) | 1)
+#define MT8516_PIN_100_CMDAT0__FUNC_CMCSD0 (MTK_PIN_NO(100) | 2)
+#define MT8516_PIN_100_CMDAT0__FUNC_ANT_SEL2 (MTK_PIN_NO(100) | 3)
+#define MT8516_PIN_100_CMDAT0__FUNC_TDM_RX_MCK (MTK_PIN_NO(100) | 5)
+#define MT8516_PIN_100_CMDAT0__FUNC_DBG_MON_B_21 (MTK_PIN_NO(100) | 7)
+
+#define MT8516_PIN_101_CMDAT1__FUNC_GPIO101 (MTK_PIN_NO(101) | 0)
+#define MT8516_PIN_101_CMDAT1__FUNC_CMDAT1 (MTK_PIN_NO(101) | 1)
+#define MT8516_PIN_101_CMDAT1__FUNC_CMCSD1 (MTK_PIN_NO(101) | 2)
+#define MT8516_PIN_101_CMDAT1__FUNC_ANT_SEL3 (MTK_PIN_NO(101) | 3)
+#define MT8516_PIN_101_CMDAT1__FUNC_CMFLASH (MTK_PIN_NO(101) | 4)
+#define MT8516_PIN_101_CMDAT1__FUNC_TDM_RX_BCK (MTK_PIN_NO(101) | 5)
+#define MT8516_PIN_101_CMDAT1__FUNC_DBG_MON_B_22 (MTK_PIN_NO(101) | 7)
+
+#define MT8516_PIN_102_CMMCLK__FUNC_GPIO102 (MTK_PIN_NO(102) | 0)
+#define MT8516_PIN_102_CMMCLK__FUNC_CMMCLK (MTK_PIN_NO(102) | 1)
+#define MT8516_PIN_102_CMMCLK__FUNC_ANT_SEL4 (MTK_PIN_NO(102) | 3)
+#define MT8516_PIN_102_CMMCLK__FUNC_TDM_RX_LRCK (MTK_PIN_NO(102) | 5)
+#define MT8516_PIN_102_CMMCLK__FUNC_DBG_MON_B_23 (MTK_PIN_NO(102) | 7)
+
+#define MT8516_PIN_103_CMPCLK__FUNC_GPIO103 (MTK_PIN_NO(103) | 0)
+#define MT8516_PIN_103_CMPCLK__FUNC_CMPCLK (MTK_PIN_NO(103) | 1)
+#define MT8516_PIN_103_CMPCLK__FUNC_CMCSK (MTK_PIN_NO(103) | 2)
+#define MT8516_PIN_103_CMPCLK__FUNC_ANT_SEL5 (MTK_PIN_NO(103) | 3)
+#define MT8516_PIN_103_CMPCLK__FUNC_TDM_RX_DI (MTK_PIN_NO(103) | 5)
+#define MT8516_PIN_103_CMPCLK__FUNC_DBG_MON_B_24 (MTK_PIN_NO(103) | 7)
+
+#define MT8516_PIN_104_MSDC1_CMD__FUNC_GPIO104 (MTK_PIN_NO(104) | 0)
+#define MT8516_PIN_104_MSDC1_CMD__FUNC_MSDC1_CMD (MTK_PIN_NO(104) | 1)
+#define MT8516_PIN_104_MSDC1_CMD__FUNC_SQICS (MTK_PIN_NO(104) | 4)
+#define MT8516_PIN_104_MSDC1_CMD__FUNC_DBG_MON_B_25 (MTK_PIN_NO(104) | 7)
+
+#define MT8516_PIN_105_MSDC1_CLK__FUNC_GPIO105 (MTK_PIN_NO(105) | 0)
+#define MT8516_PIN_105_MSDC1_CLK__FUNC_MSDC1_CLK (MTK_PIN_NO(105) | 1)
+#define MT8516_PIN_105_MSDC1_CLK__FUNC_SQISO (MTK_PIN_NO(105) | 4)
+#define MT8516_PIN_105_MSDC1_CLK__FUNC_DBG_MON_B_26 (MTK_PIN_NO(105) | 7)
+
+#define MT8516_PIN_106_MSDC1_DAT0__FUNC_GPIO106 (MTK_PIN_NO(106) | 0)
+#define MT8516_PIN_106_MSDC1_DAT0__FUNC_MSDC1_DAT0 (MTK_PIN_NO(106) | 1)
+#define MT8516_PIN_106_MSDC1_DAT0__FUNC_SQISI (MTK_PIN_NO(106) | 4)
+#define MT8516_PIN_106_MSDC1_DAT0__FUNC_DBG_MON_B_27 (MTK_PIN_NO(106) | 7)
+
+#define MT8516_PIN_107_MSDC1_DAT1__FUNC_GPIO107 (MTK_PIN_NO(107) | 0)
+#define MT8516_PIN_107_MSDC1_DAT1__FUNC_MSDC1_DAT1 (MTK_PIN_NO(107) | 1)
+#define MT8516_PIN_107_MSDC1_DAT1__FUNC_SQIWP (MTK_PIN_NO(107) | 4)
+#define MT8516_PIN_107_MSDC1_DAT1__FUNC_DBG_MON_B_28 (MTK_PIN_NO(107) | 7)
+
+#define MT8516_PIN_108_MSDC1_DAT2__FUNC_GPIO108 (MTK_PIN_NO(108) | 0)
+#define MT8516_PIN_108_MSDC1_DAT2__FUNC_MSDC1_DAT2 (MTK_PIN_NO(108) | 1)
+#define MT8516_PIN_108_MSDC1_DAT2__FUNC_SQIRST (MTK_PIN_NO(108) | 4)
+#define MT8516_PIN_108_MSDC1_DAT2__FUNC_DBG_MON_B_29 (MTK_PIN_NO(108) | 7)
+
+#define MT8516_PIN_109_MSDC1_DAT3__FUNC_GPIO109 (MTK_PIN_NO(109) | 0)
+#define MT8516_PIN_109_MSDC1_DAT3__FUNC_MSDC1_DAT3 (MTK_PIN_NO(109) | 1)
+#define MT8516_PIN_109_MSDC1_DAT3__FUNC_SQICK (MTK_PIN_NO(109) | 4)
+#define MT8516_PIN_109_MSDC1_DAT3__FUNC_DBG_MON_B_30 (MTK_PIN_NO(109) | 7)
+
+#define MT8516_PIN_110_MSDC0_DAT7__FUNC_GPIO110 (MTK_PIN_NO(110) | 0)
+#define MT8516_PIN_110_MSDC0_DAT7__FUNC_MSDC0_DAT7 (MTK_PIN_NO(110) | 1)
+#define MT8516_PIN_110_MSDC0_DAT7__FUNC_NLD7 (MTK_PIN_NO(110) | 4)
+
+#define MT8516_PIN_111_MSDC0_DAT6__FUNC_GPIO111 (MTK_PIN_NO(111) | 0)
+#define MT8516_PIN_111_MSDC0_DAT6__FUNC_MSDC0_DAT6 (MTK_PIN_NO(111) | 1)
+#define MT8516_PIN_111_MSDC0_DAT6__FUNC_NLD6 (MTK_PIN_NO(111) | 4)
+
+#define MT8516_PIN_112_MSDC0_DAT5__FUNC_GPIO112 (MTK_PIN_NO(112) | 0)
+#define MT8516_PIN_112_MSDC0_DAT5__FUNC_MSDC0_DAT5 (MTK_PIN_NO(112) | 1)
+#define MT8516_PIN_112_MSDC0_DAT5__FUNC_NLD4 (MTK_PIN_NO(112) | 4)
+
+#define MT8516_PIN_113_MSDC0_DAT4__FUNC_GPIO113 (MTK_PIN_NO(113) | 0)
+#define MT8516_PIN_113_MSDC0_DAT4__FUNC_MSDC0_DAT4 (MTK_PIN_NO(113) | 1)
+#define MT8516_PIN_113_MSDC0_DAT4__FUNC_NLD3 (MTK_PIN_NO(113) | 4)
+
+#define MT8516_PIN_114_MSDC0_RSTB__FUNC_GPIO114 (MTK_PIN_NO(114) | 0)
+#define MT8516_PIN_114_MSDC0_RSTB__FUNC_MSDC0_RSTB (MTK_PIN_NO(114) | 1)
+#define MT8516_PIN_114_MSDC0_RSTB__FUNC_NLD0 (MTK_PIN_NO(114) | 4)
+
+#define MT8516_PIN_115_MSDC0_CMD__FUNC_GPIO115 (MTK_PIN_NO(115) | 0)
+#define MT8516_PIN_115_MSDC0_CMD__FUNC_MSDC0_CMD (MTK_PIN_NO(115) | 1)
+#define MT8516_PIN_115_MSDC0_CMD__FUNC_NALE (MTK_PIN_NO(115) | 4)
+
+#define MT8516_PIN_116_MSDC0_CLK__FUNC_GPIO116 (MTK_PIN_NO(116) | 0)
+#define MT8516_PIN_116_MSDC0_CLK__FUNC_MSDC0_CLK (MTK_PIN_NO(116) | 1)
+#define MT8516_PIN_116_MSDC0_CLK__FUNC_NWEB (MTK_PIN_NO(116) | 4)
+
+#define MT8516_PIN_117_MSDC0_DAT3__FUNC_GPIO117 (MTK_PIN_NO(117) | 0)
+#define MT8516_PIN_117_MSDC0_DAT3__FUNC_MSDC0_DAT3 (MTK_PIN_NO(117) | 1)
+#define MT8516_PIN_117_MSDC0_DAT3__FUNC_NLD1 (MTK_PIN_NO(117) | 4)
+
+#define MT8516_PIN_118_MSDC0_DAT2__FUNC_GPIO118 (MTK_PIN_NO(118) | 0)
+#define MT8516_PIN_118_MSDC0_DAT2__FUNC_MSDC0_DAT2 (MTK_PIN_NO(118) | 1)
+#define MT8516_PIN_118_MSDC0_DAT2__FUNC_NLD5 (MTK_PIN_NO(118) | 4)
+
+#define MT8516_PIN_119_MSDC0_DAT1__FUNC_GPIO119 (MTK_PIN_NO(119) | 0)
+#define MT8516_PIN_119_MSDC0_DAT1__FUNC_MSDC0_DAT1 (MTK_PIN_NO(119) | 1)
+#define MT8516_PIN_119_MSDC0_DAT1__FUNC_NLD8 (MTK_PIN_NO(119) | 4)
+
+#define MT8516_PIN_120_MSDC0_DAT0__FUNC_GPIO120 (MTK_PIN_NO(120) | 0)
+#define MT8516_PIN_120_MSDC0_DAT0__FUNC_MSDC0_DAT0 (MTK_PIN_NO(120) | 1)
+#define MT8516_PIN_120_MSDC0_DAT0__FUNC_WATCHDOG (MTK_PIN_NO(120) | 4)
+#define MT8516_PIN_120_MSDC0_DAT0__FUNC_NLD2 (MTK_PIN_NO(120) | 5)
+
+#endif				/* __DTS_MT8516_PINFUNC_H */
diff --git a/arch/arm64/boot/dts/mediatek/mt8516-pumpkin.dts b/arch/arm64/boot/dts/mediatek/mt8516-pumpkin.dts
new file mode 100644
index 0000000..cce642c
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8516-pumpkin.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 BayLibre, SAS.
+ * Author: Fabien Parent <fparent@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "mt8516.dtsi"
+#include "pumpkin-common.dtsi"
+
+/ {
+	model = "Pumpkin MT8516";
+	compatible = "mediatek,mt8516";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8516.dtsi b/arch/arm64/boot/dts/mediatek/mt8516.dtsi
new file mode 100644
index 0000000..2f8adf0
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8516.dtsi
@@ -0,0 +1,457 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 MediaTek Inc.
+ * Copyright (c) 2019 BayLibre, SAS.
+ * Author: Fabien Parent <fparent@baylibre.com>
+ */
+
+#include <dt-bindings/clock/mt8516-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/phy/phy.h>
+
+#include "mt8516-pinfunc.h"
+
+/ {
+	compatible = "mediatek,mt8516";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+		opp-598000000 {
+			opp-hz = /bits/ 64 <598000000>;
+			opp-microvolt = <1150000>;
+		};
+		opp-747500000 {
+			opp-hz = /bits/ 64 <747500000>;
+			opp-microvolt = <1150000>;
+		};
+		opp-1040000000 {
+			opp-hz = /bits/ 64 <1040000000>;
+			opp-microvolt = <1200000>;
+		};
+		opp-1196000000 {
+			opp-hz = /bits/ 64 <1196000000>;
+			opp-microvolt = <1250000>;
+		};
+		opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1300000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0>;
+			enable-method = "psci";
+			cpu-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_0>,
+				<&CPU_SLEEP_0_0 &CPU_SLEEP_0_0 &CPU_SLEEP_0_0>;
+			clocks = <&infracfg CLK_IFR_MUX1_SEL>,
+				 <&topckgen CLK_TOP_MAINPLL_D2>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x1>;
+			enable-method = "psci";
+			cpu-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_0>,
+				<&CPU_SLEEP_0_0 &CPU_SLEEP_0_0 &CPU_SLEEP_0_0>;
+			clocks = <&infracfg CLK_IFR_MUX1_SEL>,
+				 <&topckgen CLK_TOP_MAINPLL_D2>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x2>;
+			enable-method = "psci";
+			cpu-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_0>,
+				<&CPU_SLEEP_0_0 &CPU_SLEEP_0_0 &CPU_SLEEP_0_0>;
+			clocks = <&infracfg CLK_IFR_MUX1_SEL>,
+				 <&topckgen CLK_TOP_MAINPLL_D2>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x3>;
+			enable-method = "psci";
+			cpu-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_0>,
+				<&CPU_SLEEP_0_0 &CPU_SLEEP_0_0 &CPU_SLEEP_0_0>;
+			clocks = <&infracfg CLK_IFR_MUX1_SEL>,
+				 <&topckgen CLK_TOP_MAINPLL_D2>;
+			clock-names = "cpu", "intermediate", "armpll";
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				entry-latency-us = <600>;
+				exit-latency-us = <600>;
+				min-residency-us = <1200>;
+				arm,psci-suspend-param = <0x0010000>;
+			};
+
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "arm,idle-state";
+				entry-latency-us = <800>;
+				exit-latency-us = <1000>;
+				min-residency-us = <2000>;
+				arm,psci-suspend-param = <0x2010000>;
+			};
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	clk26m: clk26m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	clk32k: clk32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32000>;
+		clock-output-names = "clk32k";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 128 KiB reserved for ARM Trusted Firmware (BL31) */
+		bl31_secmon_reserved: secmon@43000000 {
+			no-map;
+			reg = <0 0x43000000 0 0x20000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13
+			     (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			     (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			     (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			     (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		topckgen: topckgen@10000000 {
+			compatible = "mediatek,mt8516-topckgen", "syscon";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg: infracfg@10001000 {
+			compatible = "mediatek,mt8516-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		apmixedsys: apmixedsys@10018000 {
+			compatible = "mediatek,mt8516-apmixedsys", "syscon";
+			reg = <0 0x10018000 0 0x710>;
+			#clock-cells = <1>;
+		};
+
+		toprgu: toprgu@10007000 {
+			compatible = "mediatek,mt8516-wdt",
+				     "mediatek,mt6589-wdt";
+			reg = <0 0x10007000 0 0x1000>;
+			interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_FALLING>;
+			#reset-cells = <1>;
+		};
+
+		timer: timer@10008000 {
+			compatible = "mediatek,mt8516-timer",
+				     "mediatek,mt6577-timer";
+			reg = <0 0x10008000 0 0x1000>;
+			interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_CLK26M_D2>,
+				 <&topckgen CLK_TOP_APXGPT>;
+			clock-names = "clk13m", "bus";
+		};
+
+		syscfg_pctl: syscfg-pctl@10005000 {
+			compatible = "syscon";
+			reg = <0 0x10005000 0 0x1000>;
+		};
+
+		pio: pinctrl@1000b000 {
+			compatible = "mediatek,mt8516-pinctrl";
+			reg = <0 0x1000b000 0 0x1000>;
+			mediatek,pctl-regmap = <&syscfg_pctl>;
+			pins-are-numbered;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pwrap: pwrap@1000f000 {
+			compatible = "mediatek,mt8516-pwrap";
+			reg = <0 0x1000f000 0 0x1000>;
+			reg-names = "pwrap";
+			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_PMICWRAP_26M>,
+				 <&topckgen CLK_TOP_PMICWRAP_AP>;
+			clock-names = "spi", "wrap";
+		};
+
+		sysirq: interrupt-controller@10200620 {
+			compatible = "mediatek,mt8516-sysirq",
+				     "mediatek,mt6577-sysirq";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0 0x10200620 0 0x20>;
+		};
+
+		gic: interrupt-controller@10310000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x10310000 0 0x1000>,
+			      <0 0x10320000 0 0x1000>,
+			      <0 0x10340000 0 0x2000>,
+			      <0 0x10360000 0 0x2000>;
+			interrupts = <GIC_PPI 9
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		uart0: serial@11005000 {
+			compatible = "mediatek,mt8516-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11005000 0 0x1000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_UART0_SEL>,
+				 <&topckgen CLK_TOP_UART0>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart1: serial@11006000 {
+			compatible = "mediatek,mt8516-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11006000 0 0x1000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_UART1_SEL>,
+				 <&topckgen CLK_TOP_UART1>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart2: serial@11007000 {
+			compatible = "mediatek,mt8516-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11007000 0 0x1000>;
+			interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_UART2_SEL>,
+				 <&topckgen CLK_TOP_UART2>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		i2c0: i2c@11009000 {
+			compatible = "mediatek,mt8516-i2c",
+				     "mediatek,mt2712-i2c";
+			reg = <0 0x11009000 0 0x90>,
+			      <0 0x11000180 0 0x80>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_AHB_INFRA_D2>,
+				 <&infracfg CLK_IFR_I2C0_SEL>,
+				 <&topckgen CLK_TOP_I2C0>,
+				 <&topckgen CLK_TOP_APDMA>;
+			clock-names = "main-source",
+				      "main-sel",
+				      "main",
+				      "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@1100a000 {
+			compatible = "mediatek,mt8516-i2c",
+				     "mediatek,mt2712-i2c";
+			reg = <0 0x1100a000 0 0x90>,
+			      <0 0x11000200 0 0x80>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_AHB_INFRA_D2>,
+				 <&infracfg CLK_IFR_I2C1_SEL>,
+				 <&topckgen CLK_TOP_I2C1>,
+				 <&topckgen CLK_TOP_APDMA>;
+			clock-names = "main-source",
+				      "main-sel",
+				      "main",
+				      "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@1100b000 {
+			compatible = "mediatek,mt8516-i2c",
+				     "mediatek,mt2712-i2c";
+			reg = <0 0x1100b000 0 0x90>,
+			      <0 0x11000280 0 0x80>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_AHB_INFRA_D2>,
+				 <&infracfg CLK_IFR_I2C2_SEL>,
+				 <&topckgen CLK_TOP_I2C2>,
+				 <&topckgen CLK_TOP_APDMA>;
+			clock-names = "main-source",
+				      "main-sel",
+				      "main",
+				      "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi: spi@1100c000 {
+			compatible = "mediatek,mt8516-spi",
+				     "mediatek,mt2712-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x1100c000 0 0x1000>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D12>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&topckgen CLK_TOP_SPI>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		mmc0: mmc@11120000 {
+			compatible = "mediatek,mt8516-mmc";
+			reg = <0 0x11120000 0 0x1000>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_MSDC0>,
+				 <&topckgen CLK_TOP_AHB_INFRA_SEL>,
+				 <&topckgen CLK_TOP_MSDC0_INFRA>;
+			clock-names = "source", "hclk", "source_cg";
+			status = "disabled";
+		};
+
+		mmc1: mmc@11130000 {
+			compatible = "mediatek,mt8516-mmc";
+			reg = <0 0x11130000 0 0x1000>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_MSDC1>,
+				 <&topckgen CLK_TOP_AHB_INFRA_SEL>,
+				 <&topckgen CLK_TOP_MSDC1_INFRA>;
+			clock-names = "source", "hclk", "source_cg";
+			status = "disabled";
+		};
+
+		mmc2: mmc@11170000 {
+			compatible = "mediatek,mt8516-mmc";
+			reg = <0 0x11170000 0 0x1000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_MSDC2>,
+				 <&topckgen CLK_TOP_RG_MSDC2>,
+				 <&topckgen CLK_TOP_MSDC2_INFRA>;
+			clock-names = "source", "hclk", "source_cg";
+			status = "disabled";
+		};
+
+		rng: rng@1020c000 {
+			compatible = "mediatek,mt8516-rng",
+				     "mediatek,mt7623-rng";
+			reg = <0 0x1020c000 0 0x100>;
+			clocks = <&topckgen CLK_TOP_TRNG>;
+			clock-names = "rng";
+		};
+
+		pwm: pwm@11008000 {
+			compatible = "mediatek,mt8516-pwm";
+			reg = <0 0x11008000 0 0x1000>;
+			#pwm-cells = <2>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_PWM>,
+				 <&topckgen CLK_TOP_PWM_B>,
+				 <&topckgen CLK_TOP_PWM1_FB>,
+				 <&topckgen CLK_TOP_PWM2_FB>,
+				 <&topckgen CLK_TOP_PWM3_FB>,
+				 <&topckgen CLK_TOP_PWM4_FB>,
+				 <&topckgen CLK_TOP_PWM5_FB>;
+			clock-names = "top", "main", "pwm1", "pwm2", "pwm3",
+				      "pwm4", "pwm5";
+		};
+
+		usb0: usb@11100000 {
+			compatible = "mediatek,mtk-musb";
+			reg = <0 0x11100000 0 0x1000>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-names = "mc";
+			phys = <&usb0_port PHY_TYPE_USB2>;
+			clocks = <&topckgen CLK_TOP_USB>,
+				 <&topckgen CLK_TOP_USBIF>,
+				 <&topckgen CLK_TOP_USB_1P>;
+			clock-names = "main","mcu","univpll";
+			status = "disabled";
+		};
+
+		usb0_phy: usb@11110000 {
+			compatible = "mediatek,generic-tphy-v1";
+			reg = <0 0x11110000 0 0x800>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			usb0_port: usb-phy@11110800 {
+				reg = <0 0x11110800 0 0x100>;
+				clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
new file mode 100644
index 0000000..a31093d
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
@@ -0,0 +1,221 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 BayLibre, SAS.
+ * Author: Fabien Parent <fparent@baylibre.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	firmware {
+		optee: optee@4fd00000 {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		input-name = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default>;
+
+		volume-up {
+			gpios = <&pio 42 GPIO_ACTIVE_LOW>;
+			label = "volume_up";
+			linux,code = <115>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		volume-down {
+			gpios = <&pio 43 GPIO_ACTIVE_LOW>;
+			label = "volume_down";
+			linux,code = <114>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+	};
+};
+
+&i2c0 {
+	clock-div = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	tca6416: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		rst-gpio = <&pio 65 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tca6416_pins>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		eint20_mux_sel0 {
+			gpio-hog;
+			gpios = <0 0>;
+			input;
+			line-name = "eint20_mux_sel0";
+		};
+
+		expcon_mux_sel1 {
+			gpio-hog;
+			gpios = <1 0>;
+			input;
+			line-name = "expcon_mux_sel1";
+		};
+
+		mrg_di_mux_sel2 {
+			gpio-hog;
+			gpios = <2 0>;
+			input;
+			line-name = "mrg_di_mux_sel2";
+		};
+
+		sd_sdio_mux_sel3 {
+			gpio-hog;
+			gpios = <3 0>;
+			input;
+			line-name = "sd_sdio_mux_sel3";
+		};
+
+		sd_sdio_mux_ctrl7 {
+			gpio-hog;
+			gpios = <7 0>;
+			output-low;
+			line-name = "sd_sdio_mux_ctrl7";
+		};
+
+		hw_id0 {
+			gpio-hog;
+			gpios = <8 0>;
+			input;
+			line-name = "hw_id0";
+		};
+
+		hw_id1 {
+			gpio-hog;
+			gpios = <9 0>;
+			input;
+			line-name = "hw_id1";
+		};
+
+		hw_id2 {
+			gpio-hog;
+			gpios = <10 0>;
+			input;
+			line-name = "hw_id2";
+		};
+
+		fg_int_n {
+			gpio-hog;
+			gpios = <11 0>;
+			input;
+			line-name = "fg_int_n";
+		};
+
+		usba_pwr_en {
+			gpio-hog;
+			gpios = <12 0>;
+			output-high;
+			line-name = "usba_pwr_en";
+		};
+
+		wifi_3v3_pg {
+			gpio-hog;
+			gpios = <13 0>;
+			input;
+			line-name = "wifi_3v3_pg";
+		};
+
+		cam_rst {
+			gpio-hog;
+			gpios = <14 0>;
+			output-low;
+			line-name = "cam_rst";
+		};
+
+		cam_pwdn {
+			gpio-hog;
+			gpios = <15 0>;
+			output-low;
+			line-name = "cam_pwdn";
+		};
+	};
+};
+
+&i2c2 {
+	clock-div = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "peripheral";
+
+	usb_con: connector {
+		compatible = "usb-c-connector";
+		label = "USB-C";
+	};
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&pio {
+	gpio_keys_default: gpiodefault {
+		pins_cmd_dat {
+			pinmux = <MT8516_PIN_42_KPCOL0__FUNC_GPIO42>,
+				 <MT8516_PIN_43_KPCOL1__FUNC_GPIO43>;
+			bias-pull-up;
+			input-enable;
+		};
+	};
+
+	i2c0_pins_a: i2c0@0 {
+		pins1 {
+			pinmux = <MT8516_PIN_58_SDA0__FUNC_SDA0_0>,
+				 <MT8516_PIN_59_SCL0__FUNC_SCL0_0>;
+			bias-disable;
+		};
+	};
+
+	i2c2_pins_a: i2c2@0 {
+		pins1 {
+			pinmux = <MT8516_PIN_60_SDA2__FUNC_SDA2_0>,
+				 <MT8516_PIN_61_SCL2__FUNC_SCL2_0>;
+			bias-disable;
+		};
+	};
+
+	tca6416_pins: pinmux_tca6416_pins {
+		gpio_mux_rst_n_pin {
+			pinmux = <MT8516_PIN_65_UTXD1__FUNC_GPIO65>;
+			output-high;
+		};
+
+		gpio_mux_int_n_pin {
+			pinmux = <MT8516_PIN_64_URXD1__FUNC_GPIO64>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
index 6238e6e..11a1bb4 100644
--- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
@@ -6,6 +6,7 @@
 #include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/thermal/tegra124-soctherm.h>
+#include <dt-bindings/soc/tegra-pmc.h>
 
 / {
 	compatible = "nvidia,tegra132", "nvidia,tegra124";
@@ -577,11 +578,12 @@ rtc@7000e000 {
 		clock-names = "rtc";
 	};
 
-	pmc@7000e400 {
+	tegra_pmc: pmc@7000e400 {
 		compatible = "nvidia,tegra124-pmc";
 		reg = <0x0 0x7000e400 0x0 0x400>;
 		clocks = <&tegra_car TEGRA124_CLK_PCLK>, <&clk32k_in>;
 		clock-names = "pclk", "clk32k_in";
+		#clock-cells = <1>;
 	};
 
 	fuse@7000f800 {
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
index f1de4ff..1af7f9f 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
@@ -131,7 +131,7 @@ usb2 {
 				status = "okay";
 
 				lanes {
-					usb2-0 {
+					micro_b: usb2-0 {
 						nvidia,function = "xusb";
 						status = "okay";
 					};
@@ -174,8 +174,20 @@ ports {
 			usb2-0 {
 				status = "okay";
 				mode = "otg";
-
 				vbus-supply = <&vdd_usb0>;
+
+				usb-role-switch;
+				connector {
+					compatible = "usb-b-connector",
+						     "gpio-usb-b-connector";
+					label = "micro-USB";
+					type = "micro";
+					vbus-gpio = <&gpio
+						     TEGRA186_MAIN_GPIO(X, 7)
+						     GPIO_ACTIVE_LOW>;
+					id-gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+				};
+
 			};
 
 			usb2-1 {
@@ -201,12 +213,20 @@ usb@3530000 {
 		phy-names = "usb2-0", "usb2-1", "usb3-0";
 	};
 
+	usb@3550000 {
+		status = "okay";
+
+		phys = <&micro_b>;
+		phy-names = "usb2-0";
+	};
+
 	i2c@c250000 {
 		/* carrier board ID EEPROM */
 		eeprom@57 {
 			compatible = "atmel,24c02";
 			reg = <0x57>;
 
+			vcc-supply = <&vdd_1v8>;
 			address-bits = <8>;
 			page-size = <8>;
 			size = <256>;
@@ -258,7 +278,7 @@ sor@15540000 {
 			status = "okay";
 
 			avdd-io-hdmi-dp-supply = <&vdd_hdmi_1v05>;
-			vdd-hdmi-dp-pll = <&vdd_1v8_ap>;
+			vdd-hdmi-dp-pll-supply = <&vdd_1v8_ap>;
 
 			nvidia,dpaux = <&dpaux>;
 		};
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
index 947744d..da96de0 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
@@ -171,6 +171,7 @@ eeprom@50 {
 			compatible = "atmel,24c02";
 			reg = <0x50>;
 
+			vcc-supply = <&vdd_1v8>;
 			address-bits = <8>;
 			page-size = <8>;
 			size = <256>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index c905527..58100fb 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -572,6 +572,25 @@ usb@3530000 {
 		nvidia,xusb-padctl = <&padctl>;
 	};
 
+	usb@3550000 {
+		compatible = "nvidia,tegra186-xudc";
+		reg = <0x0 0x03550000 0x0 0x8000>,
+		      <0x0 0x03558000 0x0 0x1000>;
+		reg-names = "base", "fpci";
+		interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bpmp TEGRA186_CLK_XUSB_CORE_DEV>,
+			 <&bpmp TEGRA186_CLK_XUSB_SS>,
+			 <&bpmp TEGRA186_CLK_XUSB_CORE_SS>,
+			 <&bpmp TEGRA186_CLK_XUSB_FS>;
+		clock-names = "dev", "ss", "ss_src", "fs_src";
+		iommus = <&smmu TEGRA186_SID_XUSB_DEV>;
+		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_XUSBB>,
+				<&bpmp TEGRA186_POWER_DOMAIN_XUSBA>;
+		power-domain-names = "dev", "ss";
+		nvidia,xusb-padctl = <&padctl>;
+		status = "disabled";
+	};
+
 	fuse@3820000 {
 		compatible = "nvidia,tegra186-efuse";
 		reg = <0x0 0x03820000 0x0 0x10000>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
index bdd33ff..623f7d7 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
@@ -71,6 +71,29 @@ sdhci@3460000 {
 			vmmc-supply = <&vdd_emmc_3v3>;
 		};
 
+		padctl@3520000 {
+			avdd-usb-supply = <&vdd_usb_3v3>;
+			vclamp-usb-supply = <&vdd_1v8ao>;
+
+			ports {
+				usb2-1 {
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+
+				usb2-3 {
+					vbus-supply = <&vdd_5v_sata>;
+				};
+
+				usb3-0 {
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+
+				usb3-3 {
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+			};
+		};
+
 		rtc@c2a0000 {
 			status = "okay";
 		};
@@ -234,7 +257,7 @@ vdd_emmc_3v3: ldo3 {
 						regulator-max-microvolt = <3300000>;
 					};
 
-					ldo5 {
+					vdd_usb_3v3: ldo5 {
 						regulator-name = "VDD_USB_3V3";
 						regulator-min-microvolt = <3300000>;
 						regulator-max-microvolt = <3300000>;
@@ -317,5 +340,16 @@ vdd_12v_pcie: regulator@3 {
 			gpio = <&gpio TEGRA194_MAIN_GPIO(A, 1) GPIO_ACTIVE_HIGH>;
 			regulator-boot-on;
 		};
+
+		vdd_5v_sata: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+
+			regulator-name = "VDD_5V_SATA";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA194_MAIN_GPIO(Z, 1) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
index 985e7d8..e15d1ea 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
@@ -37,6 +37,69 @@ hda@3510000 {
 			status = "okay";
 		};
 
+		padctl@3520000 {
+			status = "okay";
+
+			pads {
+				usb2 {
+					lanes {
+						usb2-1 {
+							status = "okay";
+						};
+
+						usb2-3 {
+							status = "okay";
+						};
+					};
+				};
+
+				usb3 {
+					lanes {
+						usb3-0 {
+							status = "okay";
+						};
+
+						usb3-3 {
+							status = "okay";
+						};
+					};
+				};
+			};
+
+			ports {
+				usb2-1 {
+					mode = "host";
+					status = "okay";
+				};
+
+				usb2-3 {
+					mode = "host";
+					status = "okay";
+				};
+
+				usb3-0 {
+					nvidia,usb2-companion = <1>;
+					status = "okay";
+				};
+
+				usb3-3 {
+					nvidia,usb2-companion = <3>;
+					maximum-speed = "super-speed";
+					status = "okay";
+				};
+			};
+		};
+
+		usb@3610000 {
+			status = "okay";
+
+			phys =	<&{/cbb@0/padctl@3520000/pads/usb2/lanes/usb2-1}>,
+				<&{/cbb@0/padctl@3520000/pads/usb2/lanes/usb2-3}>,
+				<&{/cbb@0/padctl@3520000/pads/usb3/lanes/usb3-0}>,
+				<&{/cbb@0/padctl@3520000/pads/usb3/lanes/usb3-3}>;
+			phy-names = "usb2-1", "usb2-3", "usb3-0", "usb3-3";
+		};
+
 		pwm@c340000 {
 			status = "okay";
 		};
@@ -136,6 +199,24 @@ pcie@141a0000 {
 			    "p2u-5", "p2u-6", "p2u-7";
 	};
 
+	pcie_ep@141a0000 {
+		status = "disabled";
+
+		vddio-pex-ctl-supply = <&vdd_1v8ao>;
+
+		reset-gpios = <&gpio TEGRA194_MAIN_GPIO(GG, 1) GPIO_ACTIVE_LOW>;
+
+		nvidia,refclk-select-gpios = <&gpio_aon TEGRA194_AON_GPIO(AA, 5)
+					      GPIO_ACTIVE_HIGH>;
+
+		phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+		       <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+		       <&p2u_nvhs_6>, <&p2u_nvhs_7>;
+
+		phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+			    "p2u-5", "p2u-6", "p2u-7";
+	};
+
 	fan: fan {
 		compatible = "pwm-fan";
 		pwms = <&pwm4 0 45334>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index ccac43b..f4ede86 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -537,6 +537,145 @@ hda@3510000 {
 			status = "disabled";
 		};
 
+		xusb_padctl: padctl@3520000 {
+			compatible = "nvidia,tegra194-xusb-padctl";
+			reg = <0x03520000 0x1000>,
+			      <0x03540000 0x1000>;
+			reg-names = "padctl", "ao";
+
+			resets = <&bpmp TEGRA194_RESET_XUSB_PADCTL>;
+			reset-names = "padctl";
+
+			status = "disabled";
+
+			pads {
+				usb2 {
+					clocks = <&bpmp TEGRA194_CLK_USB2_TRK>;
+					clock-names = "trk";
+
+					lanes {
+						usb2-0 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+
+						usb2-1 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+
+						usb2-2 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+
+						usb2-3 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+					};
+				};
+
+				usb3 {
+					lanes {
+						usb3-0 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+
+						usb3-1 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+
+						usb3-2 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+
+						usb3-3 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+					};
+				};
+			};
+
+			ports {
+				usb2-0 {
+					status = "disabled";
+				};
+
+				usb2-1 {
+					status = "disabled";
+				};
+
+				usb2-2 {
+					status = "disabled";
+				};
+
+				usb2-3 {
+					status = "disabled";
+				};
+
+				usb3-0 {
+					status = "disabled";
+				};
+
+				usb3-1 {
+					status = "disabled";
+				};
+
+				usb3-2 {
+					status = "disabled";
+				};
+
+				usb3-3 {
+					status = "disabled";
+				};
+			};
+		};
+
+		usb@3610000 {
+			compatible = "nvidia,tegra194-xusb";
+			reg = <0x03610000 0x40000>,
+			      <0x03600000 0x10000>;
+			reg-names = "hcd", "fpci";
+
+			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&bpmp TEGRA194_CLK_XUSB_CORE_HOST>,
+				 <&bpmp TEGRA194_CLK_XUSB_FALCON>,
+				 <&bpmp TEGRA194_CLK_XUSB_CORE_SS>,
+				 <&bpmp TEGRA194_CLK_XUSB_SS>,
+				 <&bpmp TEGRA194_CLK_CLK_M>,
+				 <&bpmp TEGRA194_CLK_XUSB_FS>,
+				 <&bpmp TEGRA194_CLK_UTMIPLL>,
+				 <&bpmp TEGRA194_CLK_CLK_M>,
+				 <&bpmp TEGRA194_CLK_PLLE>;
+			clock-names = "xusb_host", "xusb_falcon_src",
+				      "xusb_ss", "xusb_ss_src", "xusb_hs_src",
+				      "xusb_fs_src", "pll_u_480m", "clk_m",
+				      "pll_e";
+
+			power-domains = <&bpmp TEGRA194_POWER_DOMAIN_XUSBC>,
+					<&bpmp TEGRA194_POWER_DOMAIN_XUSBA>;
+			power-domain-names = "xusb_host", "xusb_ss";
+
+			nvidia,xusb-padctl = <&xusb_padctl>;
+			status = "disabled";
+		};
+
 		fuse@3820000 {
 			compatible = "nvidia,tegra194-efuse";
 			reg = <0x03820000 0x10000>;
@@ -1208,7 +1347,7 @@ sor3: sor@15bc0000 {
 	};
 
 	pcie@14100000 {
-		compatible = "nvidia,tegra194-pcie", "snps,dw-pcie";
+		compatible = "nvidia,tegra194-pcie";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>;
 		reg = <0x00 0x14100000 0x0 0x00020000   /* appl registers (128K)      */
 		       0x00 0x30000000 0x0 0x00040000   /* configuration space (256K) */
@@ -1253,7 +1392,7 @@ pcie@14100000 {
 	};
 
 	pcie@14120000 {
-		compatible = "nvidia,tegra194-pcie", "snps,dw-pcie";
+		compatible = "nvidia,tegra194-pcie";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>;
 		reg = <0x00 0x14120000 0x0 0x00020000   /* appl registers (128K)      */
 		       0x00 0x32000000 0x0 0x00040000   /* configuration space (256K) */
@@ -1298,7 +1437,7 @@ pcie@14120000 {
 	};
 
 	pcie@14140000 {
-		compatible = "nvidia,tegra194-pcie", "snps,dw-pcie";
+		compatible = "nvidia,tegra194-pcie";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>;
 		reg = <0x00 0x14140000 0x0 0x00020000   /* appl registers (128K)      */
 		       0x00 0x34000000 0x0 0x00040000   /* configuration space (256K) */
@@ -1343,7 +1482,7 @@ pcie@14140000 {
 	};
 
 	pcie@14160000 {
-		compatible = "nvidia,tegra194-pcie", "snps,dw-pcie";
+		compatible = "nvidia,tegra194-pcie";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX4A>;
 		reg = <0x00 0x14160000 0x0 0x00020000   /* appl registers (128K)      */
 		       0x00 0x36000000 0x0 0x00040000   /* configuration space (256K) */
@@ -1388,7 +1527,7 @@ pcie@14160000 {
 	};
 
 	pcie@14180000 {
-		compatible = "nvidia,tegra194-pcie", "snps,dw-pcie";
+		compatible = "nvidia,tegra194-pcie";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>;
 		reg = <0x00 0x14180000 0x0 0x00020000   /* appl registers (128K)      */
 		       0x00 0x38000000 0x0 0x00040000   /* configuration space (256K) */
@@ -1433,7 +1572,7 @@ pcie@14180000 {
 	};
 
 	pcie@141a0000 {
-		compatible = "nvidia,tegra194-pcie", "snps,dw-pcie";
+		compatible = "nvidia,tegra194-pcie";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>;
 		reg = <0x00 0x141a0000 0x0 0x00020000   /* appl registers (128K)      */
 		       0x00 0x3a000000 0x0 0x00040000   /* configuration space (256K) */
@@ -1481,6 +1620,105 @@ pcie@141a0000 {
 			  0x82000000 0x0  0x40000000 0x1f 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */
 	};
 
+	pcie_ep@14160000 {
+		compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep";
+		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX4A>;
+		reg = <0x00 0x14160000 0x0 0x00020000   /* appl registers (128K)      */
+		       0x00 0x36040000 0x0 0x00040000   /* iATU_DMA reg space (256K)  */
+		       0x00 0x36080000 0x0 0x00040000   /* DBI reg space (256K)       */
+		       0x14 0x00000000 0x4 0x00000000>; /* Address Space (16G)        */
+		reg-names = "appl", "atu_dma", "dbi", "addr_space";
+
+		status = "disabled";
+
+		num-lanes = <4>;
+		num-ib-windows = <2>;
+		num-ob-windows = <8>;
+
+		clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_4>;
+		clock-names = "core";
+
+		resets = <&bpmp TEGRA194_RESET_PEX0_CORE_4_APB>,
+			 <&bpmp TEGRA194_RESET_PEX0_CORE_4>;
+		reset-names = "apb", "core";
+
+		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;	/* controller interrupt */
+		interrupt-names = "intr";
+
+		nvidia,bpmp = <&bpmp 4>;
+
+		nvidia,aspm-cmrt-us = <60>;
+		nvidia,aspm-pwr-on-t-us = <20>;
+		nvidia,aspm-l0s-entrance-latency-us = <3>;
+	};
+
+	pcie_ep@14180000 {
+		compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep";
+		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>;
+		reg = <0x00 0x14180000 0x0 0x00020000   /* appl registers (128K)      */
+		       0x00 0x38040000 0x0 0x00040000   /* iATU_DMA reg space (256K)  */
+		       0x00 0x38080000 0x0 0x00040000   /* DBI reg space (256K)       */
+		       0x18 0x00000000 0x4 0x00000000>; /* Address Space (16G)        */
+		reg-names = "appl", "atu_dma", "dbi", "addr_space";
+
+		status = "disabled";
+
+		num-lanes = <8>;
+		num-ib-windows = <2>;
+		num-ob-windows = <8>;
+
+		clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_0>;
+		clock-names = "core";
+
+		resets = <&bpmp TEGRA194_RESET_PEX0_CORE_0_APB>,
+			 <&bpmp TEGRA194_RESET_PEX0_CORE_0>;
+		reset-names = "apb", "core";
+
+		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;	/* controller interrupt */
+		interrupt-names = "intr";
+
+		nvidia,bpmp = <&bpmp 0>;
+
+		nvidia,aspm-cmrt-us = <60>;
+		nvidia,aspm-pwr-on-t-us = <20>;
+		nvidia,aspm-l0s-entrance-latency-us = <3>;
+	};
+
+	pcie_ep@141a0000 {
+		compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep";
+		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>;
+		reg = <0x00 0x141a0000 0x0 0x00020000   /* appl registers (128K)      */
+		       0x00 0x3a040000 0x0 0x00040000   /* iATU_DMA reg space (256K)  */
+		       0x00 0x3a080000 0x0 0x00040000   /* DBI reg space (256K)       */
+		       0x1c 0x00000000 0x4 0x00000000>; /* Address Space (16G)        */
+		reg-names = "appl", "atu_dma", "dbi", "addr_space";
+
+		status = "disabled";
+
+		num-lanes = <8>;
+		num-ib-windows = <2>;
+		num-ob-windows = <8>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&clkreq_c5_bi_dir_state>;
+
+		clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>;
+		clock-names = "core";
+
+		resets = <&bpmp TEGRA194_RESET_PEX1_CORE_5_APB>,
+			 <&bpmp TEGRA194_RESET_PEX1_CORE_5>;
+		reset-names = "apb", "core";
+
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;	/* controller interrupt */
+		interrupt-names = "intr";
+
+		nvidia,bpmp = <&bpmp 5>;
+
+		nvidia,aspm-cmrt-us = <60>;
+		nvidia,aspm-pwr-on-t-us = <20>;
+		nvidia,aspm-l0s-entrance-latency-us = <3>;
+	};
+
 	sysram@40000000 {
 		compatible = "nvidia,tegra194-sysram", "mmio-sram";
 		reg = <0x0 0x40000000 0x0 0x50000>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
index cb58f79..f87d243 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
@@ -265,11 +265,14 @@ avdd_1v05: ldo8 {
 	};
 
 	i2c@7000c500 {
+		status = "okay";
+
 		/* module ID EEPROM */
 		eeprom@50 {
 			compatible = "atmel,24c02";
 			reg = <0x50>;
 
+			vcc-supply = <&vdd_1v8>;
 			address-bits = <8>;
 			page-size = <8>;
 			size = <256>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
index a3cafe3..ea0e1ef 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
@@ -56,6 +56,7 @@ i2c@7000c400 {
 		backlight: backlight@2c {
 			compatible = "ti,lp8557";
 			reg = <0x2c>;
+			power-supply = <&vdd_3v3_sys>;
 
 			dev-ctrl = /bits/ 8 <0x80>;
 			init-brt = /bits/ 8 <0xff>;
@@ -85,6 +86,7 @@ eeprom@57 {
 			compatible = "atmel,24c02";
 			reg = <0x57>;
 
+			vcc-supply = <&vdd_1v8>;
 			address-bits = <8>;
 			page-size = <8>;
 			size = <256>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
index b009507..313a4c2 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
@@ -5,6 +5,10 @@ / {
 	model = "NVIDIA Tegra210 P2597 I/O board";
 	compatible = "nvidia,p2597", "nvidia,tegra210";
 
+	aliases {
+		ethernet = "/usb@70090000/ethernet@1";
+	};
+
 	host1x@50000000 {
 		dpaux@54040000 {
 			status = "okay";
@@ -1336,7 +1340,6 @@ usb@70090000 {
 		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-5}>;
 		phy-names = "usb2-0", "usb2-1", "usb2-2", "usb2-3", "usb3-0",
 			    "usb3-1";
-
 		dvddio-pex-supply = <&vdd_pex_1v05>;
 		hvddio-pex-supply = <&vdd_1v8>;
 		avdd-usb-supply = <&vdd_3v3_sys>;
@@ -1347,6 +1350,13 @@ usb@70090000 {
 		hvdd-usb-ss-pll-e-supply = <&vdd_1v8>;
 
 		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethernet@1 {
+			reg = <1>;
+		};
 	};
 
 	padctl@7009f000 {
@@ -1362,7 +1372,7 @@ usb2 {
 				status = "okay";
 
 				lanes {
-					usb2-0 {
+					micro_b: usb2-0 {
 						nvidia,function = "xusb";
 						status = "okay";
 					};
@@ -1440,7 +1450,19 @@ sata-0 {
 		ports {
 			usb2-0 {
 				status = "okay";
+				vbus-supply = <&vdd_usb_vbus_otg>;
 				mode = "otg";
+
+				usb-role-switch;
+				connector {
+					compatible = "usb-b-connector",
+						     "gpio-usb-b-connector";
+					label = "micro-USB";
+					type = "micro";
+					vbus-gpio = <&gpio TEGRA_GPIO(Z, 0)
+						     GPIO_ACTIVE_LOW>;
+					id-gpio = <&pmic 0 0>;
+				};
 			};
 
 			usb2-1 {
@@ -1483,6 +1505,14 @@ sdhci@700b0000 {
 		vmmc-supply = <&vdd_3v3_sd>;
 	};
 
+	usb@700d0000 {
+		status = "okay";
+		phys = <&micro_b>;
+		phy-names = "usb2-0";
+		avddio-usb-supply = <&vdd_3v3_sys>;
+		hvdd-usb-supply = <&vdd_1v8>;
+	};
+
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -1606,6 +1636,17 @@ vdd_usb_vbus: regulator@9 {
 			vin-supply = <&vdd_5v0_sys>;
 		};
 
+		vdd_usb_vbus_otg: regulator@11 {
+			compatible = "regulator-fixed";
+			reg = <9>;
+			regulator-name = "USB_VBUS_EN0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_5v0_sys>;
+		};
+
 		vdd_hdmi: regulator@10 {
 			compatible = "regulator-fixed";
 			reg = <10>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
index 9101d3a..21ed175 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
@@ -114,6 +114,7 @@ eeprom@50 {
 			compatible = "atmel,24c02";
 			reg = <0x50>;
 
+			vcc-supply = <&vdd_1v8>;
 			address-bits = <8>;
 			page-size = <8>;
 			size = <256>;
@@ -124,6 +125,7 @@ eeprom@57 {
 			compatible = "atmel,24c02";
 			reg = <0x57>;
 
+			vcc-supply = <&vdd_1v8>;
 			address-bits = <8>;
 			page-size = <8>;
 			size = <256>;
@@ -443,7 +445,7 @@ usb2 {
 				status = "okay";
 
 				lanes {
-					usb2-0 {
+					micro_b: usb2-0 {
 						nvidia,function = "xusb";
 						status = "okay";
 					};
@@ -505,7 +507,17 @@ pcie-6 {
 		ports {
 			usb2-0 {
 				status = "okay";
-				mode = "otg";
+				mode = "peripheral";
+
+				usb-role-switch;
+				connector {
+					compatible = "usb-b-connector",
+						     "gpio-usb-b-connector";
+					label = "micro-USB";
+					type = "micro";
+					vbus-gpio = <&gpio TEGRA_GPIO(CC, 4)
+						     GPIO_ACTIVE_LOW>;
+				};
 			};
 
 			usb2-1 {
@@ -536,6 +548,14 @@ sdhci@700b0000 {
 		vmmc-supply = <&vdd_3v3_sd>;
 	};
 
+	usb@700d0000 {
+		status = "okay";
+		phys = <&micro_b>;
+		phy-names = "usb2-0";
+		avddio-usb-supply = <&vdd_3v3_sys>;
+		hvdd-usb-supply = <&vdd_1v8>;
+	};
+
 	sdhci@700b0400 {
 		status = "okay";
 		bus-width = <4>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
index 72c7a04..2faab63 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
@@ -1592,7 +1592,7 @@ nau8825@1a {
 			reg = <0x1a>;
 			interrupt-parent = <&gpio>;
 			interrupts = <TEGRA_GPIO(E, 6) IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&tegra_car TEGRA210_CLK_CLK_OUT_2>;
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_OUT_2>;
 			clock-names = "mclk";
 
 			nuvoton,jkdet-enable;
diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
index 48c6325..64c46ce 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
@@ -7,6 +7,7 @@
 #include <dt-bindings/reset/tegra210-car.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/thermal/tegra124-soctherm.h>
+#include <dt-bindings/soc/tegra-pmc.h>
 
 / {
 	compatible = "nvidia,tegra210";
@@ -770,16 +771,17 @@ rtc@7000e000 {
 		compatible = "nvidia,tegra210-rtc", "nvidia,tegra20-rtc";
 		reg = <0x0 0x7000e000 0x0 0x100>;
 		interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-parent = <&pmc>;
+		interrupt-parent = <&tegra_pmc>;
 		clocks = <&tegra_car TEGRA210_CLK_RTC>;
 		clock-names = "rtc";
 	};
 
-	pmc: pmc@7000e400 {
+	tegra_pmc: pmc@7000e400 {
 		compatible = "nvidia,tegra210-pmc";
 		reg = <0x0 0x7000e400 0x0 0x400>;
 		clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>;
 		clock-names = "pclk", "clk32k_in";
+		#clock-cells = <1>;
 		#interrupt-cells = <2>;
 		interrupt-controller;
 
@@ -1207,6 +1209,25 @@ sdhci@700b0600 {
 		status = "disabled";
 	};
 
+	usb@700d0000 {
+		compatible = "nvidia,tegra210-xudc";
+		reg = <0x0 0x700d0000 0x0 0x8000>,
+		      <0x0 0x700d8000 0x0 0x1000>,
+		      <0x0 0x700d9000 0x0 0x1000>;
+		reg-names = "base", "fpci", "ipfs";
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_XUSB_DEV>,
+			 <&tegra_car TEGRA210_CLK_XUSB_SS>,
+			 <&tegra_car TEGRA210_CLK_XUSB_SSP_SRC>,
+			 <&tegra_car TEGRA210_CLK_XUSB_FS_SRC>,
+			 <&tegra_car TEGRA210_CLK_XUSB_HS_SRC>;
+		clock-names = "dev", "ss", "ss_src", "fs_src", "hs_src";
+		power-domains = <&pd_xusbdev>, <&pd_xusbss>;
+		power-domain-names = "dev", "ss";
+		nvidia,xusb-padctl = <&padctl>;
+		status = "disabled";
+	};
+
 	mipi: mipi@700e3000 {
 		compatible = "nvidia,tegra210-mipi";
 		reg = <0x0 0x700e3000 0x0 0x100>;
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 973c0f0..cc103f7 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -2,6 +2,7 @@
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-db820c.dtb
 dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq6018-cp01-c1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk01.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-longcheer-l8150.dtb
@@ -22,5 +23,6 @@
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm850-lenovo-yoga-c630.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-1000.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 037e26b..06aab44 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -562,7 +562,6 @@ &wcd_codec {
 
 &smd_rpm_regulators {
 	vdd_l1_l2_l3-supply = <&pm8916_s3>;
-	vdd_l5-supply = <&pm8916_s3>;
 	vdd_l4_l5_l6-supply = <&pm8916_s4>;
 	vdd_l7-supply = <&pm8916_s4>;
 
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index fff6115..af87350 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -999,13 +999,7 @@ &ufsphy {
 
 	vdda-phy-supply = <&vreg_l28a_0p925>;
 	vdda-pll-supply = <&vreg_l12a_1p8>;
-
-	vdda-phy-max-microamp = <18380>;
-	vdda-pll-max-microamp = <9440>;
-
 	vddp-ref-clk-supply = <&vreg_l25a_1p2>;
-	vddp-ref-clk-max-microamp = <100>;
-	vddp-ref-clk-always-on;
 };
 
 &ufshc {
diff --git a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
new file mode 100644
index 0000000..b31117a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * IPQ6018 CP01 board device tree source
+ *
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ipq6018.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ6018/AP-CP01-C1";
+	compatible = "qcom,ipq6018-cp01", "qcom,ipq6018";
+
+	aliases {
+		serial0 = &blsp1_uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		bootargs-append = " swiotlb=1";
+	};
+};
+
+&blsp1_uart3 {
+	pinctrl-0 = <&serial_3_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+};
+
+&i2c_1 {
+	pinctrl-0 = <&i2c_1_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+};
+
+&spi_0 {
+	cs-select = <0>;
+	status = "ok";
+
+	m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		compatible = "n25q128a11";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&tlmm {
+	i2c_1_pins: i2c-1-pins {
+		pins = "gpio42", "gpio43";
+		function = "blsp2_i2c";
+		drive-strength = <8>;
+	};
+
+	spi_0_pins: spi-0-pins {
+		pins = "gpio38", "gpio39", "gpio40", "gpio41";
+		function = "blsp0_spi";
+		drive-strength = <8>;
+		bias-pull-down;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
new file mode 100644
index 0000000..1aa8d85
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -0,0 +1,443 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * IPQ6018 SoC device tree source
+ *
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-ipq6018.h>
+#include <dt-bindings/reset/qcom,gcc-ipq6018.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&intc>;
+
+	clocks {
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+
+		xo: xo {
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x2>;
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x3>;
+			next-level-cache = <&L2_0>;
+		};
+
+		L2_0: l2-cache {
+			compatible = "cache";
+			cache-level = <0x2>;
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm";
+		};
+	};
+
+	tcsr_mutex: hwlock {
+		compatible = "qcom,tcsr-mutex";
+		syscon = <&tcsr_mutex_regs 0 0x80>;
+		#hwlock-cells = <1>;
+	};
+
+	pmuv8: pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) |
+					 IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci: psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		tz: tz@48500000 {
+			reg = <0x0 0x48500000 0x0 0x00200000>;
+			no-map;
+		};
+
+		smem_region: memory@4aa00000 {
+			reg = <0x0 0x4aa00000 0x0 0x00100000>;
+			no-map;
+		};
+
+		q6_region: memory@4ab00000 {
+			reg = <0x0 0x4ab00000 0x0 0x02800000>;
+			no-map;
+		};
+	};
+
+	smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_region>;
+		hwlocks = <&tcsr_mutex 0>;
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+		dma-ranges;
+		compatible = "simple-bus";
+
+		prng: qrng@e1000 {
+			compatible = "qcom,prng-ee";
+			reg = <0xe3000 0x1000>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		cryptobam: dma@704000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x00704000 0x20000>;
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_CRYPTO_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <1>;
+			qcom,controlled-remotely = <1>;
+			qcom,config-pipe-trust-reg = <0>;
+		};
+
+		crypto: crypto@73a000 {
+			compatible = "qcom,crypto-v5.1";
+			reg = <0x0073a000 0x6000>;
+			clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
+				<&gcc GCC_CRYPTO_AXI_CLK>,
+				<&gcc GCC_CRYPTO_CLK>;
+			clock-names = "iface", "bus", "core";
+			dmas = <&cryptobam 2>, <&cryptobam 3>;
+			dma-names = "rx", "tx";
+		};
+
+		tlmm: pinctrl@1000000 {
+			compatible = "qcom,ipq6018-pinctrl";
+			reg = <0x01000000 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&tlmm 0 80>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			serial_3_pins: serial3-pinmux {
+				pins = "gpio44", "gpio45";
+				function = "blsp2_uart";
+				drive-strength = <8>;
+				bias-pull-down;
+			};
+		};
+
+		gcc: gcc@1800000 {
+			compatible = "qcom,gcc-ipq6018";
+			reg = <0x01800000 0x80000>;
+			clocks = <&xo>, <&sleep_clk>;
+			clock-names = "xo", "sleep_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		tcsr_mutex_regs: syscon@1905000 {
+			compatible = "syscon";
+			reg = <0x01905000 0x8000>;
+		};
+
+		tcsr_q6: syscon@1945000 {
+			compatible = "syscon";
+			reg = <0x01945000 0xe000>;
+		};
+
+		blsp_dma: dma@7884000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07884000 0x2b000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		blsp1_uart3: serial@78b1000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b1000 0x200>;
+			interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
+				<&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		spi_0: spi@78b5000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x078b5000 0x600>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			spi-max-frequency = <50000000>;
+			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+				<&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 12>, <&blsp_dma 13>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		spi_1: spi@78b6000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x078b6000 0x600>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			spi-max-frequency = <50000000>;
+			clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
+				<&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 14>, <&blsp_dma 15>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		i2c_0: i2c@78b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x078b6000 0x600>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+				<&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			clock-frequency  = <400000>;
+			dmas = <&blsp_dma 15>, <&blsp_dma 14>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2c_1: i2c@78b7000 { /* BLSP1 QUP2 */
+			compatible = "qcom,i2c-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x078b7000 0x600>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+				<&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			clock-frequency  = <400000>;
+			dmas = <&blsp_dma 17>, <&blsp_dma 16>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <0x3>;
+			reg =   <0x0b000000 0x1000>,  /*GICD*/
+				<0x0b002000 0x1000>,  /*GICC*/
+				<0x0b001000 0x1000>,  /*GICH*/
+				<0x0b004000 0x1000>;  /*GICV*/
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		watchdog@b017000 {
+			compatible = "qcom,kpss-wdt";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
+			reg = <0x0b017000 0x40>;
+			clocks = <&sleep_clk>;
+			timeout-sec = <10>;
+		};
+
+		apcs_glb: mailbox@b111000 {
+			compatible = "qcom,ipq8074-apcs-apps-global";
+			reg = <0x0b111000 0xc>;
+
+			#mbox-cells = <1>;
+		};
+
+		timer {
+			compatible = "arm,armv8-timer";
+			interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		};
+
+		timer@b120000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0b120000 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@b120000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b121000 0x1000>,
+				      <0x0b122000 0x1000>;
+			};
+
+			frame@b123000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xb123000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b124000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b124000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b125000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b125000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b126000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b126000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b127000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b127000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b128000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b128000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		q6v5_wcss: remoteproc@cd00000 {
+			compatible = "qcom,ipq8074-wcss-pil";
+			reg = <0x0cd00000 0x4040>,
+				<0x004ab000 0x20>;
+			reg-names = "qdsp6",
+				    "rmb";
+			interrupts-extended = <&intc GIC_SPI 325 IRQ_TYPE_EDGE_RISING>,
+					      <&wcss_smp2p_in 0 0>,
+					      <&wcss_smp2p_in 1 0>,
+					      <&wcss_smp2p_in 2 0>,
+					      <&wcss_smp2p_in 3 0>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			resets = <&gcc GCC_WCSSAON_RESET>,
+				 <&gcc GCC_WCSS_BCR>,
+				 <&gcc GCC_WCSS_Q6_BCR>;
+
+			reset-names = "wcss_aon_reset",
+				      "wcss_reset",
+				      "wcss_q6_reset";
+
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "prng";
+
+			qcom,halt-regs = <&tcsr_q6 0xa000 0xd000 0x0>;
+
+			qcom,smem-states = <&wcss_smp2p_out 0>,
+					   <&wcss_smp2p_out 1>;
+			qcom,smem-state-names = "shutdown",
+						"stop";
+
+			memory-region = <&q6_region>;
+
+			glink-edge {
+				interrupts = <GIC_SPI 321 IRQ_TYPE_EDGE_RISING>;
+				qcom,remote-pid = <1>;
+				mboxes = <&apcs_glb 8>;
+
+				qrtr_requests {
+					qcom,glink-channels = "IPCRTR";
+				};
+			};
+		};
+
+	};
+
+	wcss: wcss-smp2p {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_SPI 322 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs_glb 9>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		wcss_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		wcss_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 67ee5f5..2b31823 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -21,6 +21,7 @@ tlmm: pinctrl@1000000 {
 			reg = <0x1000000 0x300000>;
 			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 70>;
 			#gpio-cells = <0x2>;
 			interrupt-controller;
 			#interrupt-cells = <0x2>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
index bd1eb3e..43c5e0f 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
@@ -15,6 +15,14 @@ chosen {
 		stdout-path = "serial0";
 	};
 
+	reserved-memory {
+		/* Additional memory used by Samsung firmware modifications */
+		tz-apps@85500000 {
+			reg = <0x0 0x85500000 0x0 0xb00000>;
+			no-map;
+		};
+	};
+
 	soc {
 		sdhci@7824000 {
 			status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 9f31064..a88a15f 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -423,6 +423,7 @@ msmgpio: pinctrl@1000000 {
 			reg = <0x1000000 0x300000>;
 			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
+			gpio-ranges = <&msmgpio 0 0 122>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -860,7 +861,7 @@ tsens_calsel: calsel@ec {
 		};
 
 		tsens: thermal-sensor@4a9000 {
-			compatible = "qcom,msm8916-tsens";
+			compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
 			reg = <0x4a9000 0x1000>, /* TM */
 			      <0x4a8000 0x1000>; /* SROT */
 			nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
@@ -1129,6 +1130,20 @@ smd-edge {
 				qcom,remote-pid = <1>;
 
 				label = "hexagon";
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,smd-channels = "fastrpcsmd-apps-dsp";
+					label = "adsp";
+
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					cb@1{
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+					};
+				};
 			};
 		};
 
@@ -1415,6 +1430,7 @@ etm@85c000 {
 
 			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
+			arm,coresight-loses-context-with-cpu;
 
 			cpu = <&CPU0>;
 
@@ -1433,6 +1449,7 @@ etm@85d000 {
 
 			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
+			arm,coresight-loses-context-with-cpu;
 
 			cpu = <&CPU1>;
 
@@ -1451,6 +1468,7 @@ etm@85e000 {
 
 			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
+			arm,coresight-loses-context-with-cpu;
 
 			cpu = <&CPU2>;
 
@@ -1469,6 +1487,7 @@ etm@85f000 {
 
 			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
+			arm,coresight-loses-context-with-cpu;
 
 			cpu = <&CPU3>;
 
diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi
index 8be60c0..2021795 100644
--- a/arch/arm64/boot/dts/qcom/msm8992.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi
@@ -171,6 +171,7 @@ msmgpio: pinctrl@fd510000 {
 			reg = <0xfd510000 0x4000>;
 			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
+			gpio-ranges = <&msmgpio 0 0 146>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi
index 3932757..b1c2d7d 100644
--- a/arch/arm64/boot/dts/qcom/msm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi
@@ -133,6 +133,7 @@ msmgpio: pinctrl@fd510000 {
 			reg = <0xfd510000 0x4000>;
 			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
+			gpio-ranges = <&msmgpio 0 0 146>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 7ae082e..14827ad 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -443,10 +443,13 @@ gcc: clock-controller@300000 {
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
 			reg = <0x00300000 0x90000>;
+
+			clocks = <&rpmcc RPM_SMD_LN_BB_CLK>;
+			clock-names = "cxo2";
 		};
 
 		tsens0: thermal-sensor@4a9000 {
-			compatible = "qcom,msm8996-tsens";
+			compatible = "qcom,msm8996-tsens", "qcom,tsens-v2";
 			reg = <0x004a9000 0x1000>, /* TM */
 			      <0x004a8000 0x1000>; /* SROT */
 			#qcom,sensors = <13>;
@@ -457,7 +460,7 @@ tsens0: thermal-sensor@4a9000 {
 		};
 
 		tsens1: thermal-sensor@4ad000 {
-			compatible = "qcom,msm8996-tsens";
+			compatible = "qcom,msm8996-tsens", "qcom,tsens-v2";
 			reg = <0x004ad000 0x1000>, /* TM */
 			      <0x004ac000 0x1000>; /* SROT */
 			#qcom,sensors = <8>;
@@ -695,6 +698,7 @@ msmgpio: pinctrl@1010000 {
 			reg = <0x01010000 0x300000>;
 			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
+			gpio-ranges = <&msmgpio 0 0 150>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -882,7 +886,7 @@ ufshc: ufshc@624000 {
 			reg = <0x00624000 0x2500>;
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
 
-			phys = <&ufsphy>;
+			phys = <&ufsphy_lane>;
 			phy-names = "ufsphy";
 
 			power-domains = <&gcc UFS_GDSC>;
@@ -934,16 +938,25 @@ ufs_variant {
 		};
 
 		ufsphy: phy@627000 {
-			compatible = "qcom,msm8996-ufs-phy-qmp-14nm";
-			reg = <0x00627000 0xda8>;
-			reg-names = "phy_mem";
-			#phy-cells = <0>;
+			compatible = "qcom,msm8996-qmp-ufs-phy";
+			reg = <0x00627000 0x1c4>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
 
-			clock-names = "ref_clk_src", "ref_clk";
-			clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
-				 <&gcc GCC_UFS_CLKREF_CLK>;
+			clocks = <&gcc GCC_UFS_CLKREF_CLK>;
+			clock-names = "ref";
+
 			resets = <&ufshc 0>;
+			reset-names = "ufsphy";
 			status = "disabled";
+
+			ufsphy_lane: lanes@627400 {
+				reg = <0x627400 0x12c>,
+				      <0x627600 0x200>,
+				      <0x627c00 0x1b4>;
+				#phy-cells = <0>;
+			};
 		};
 
 		camss: camss@a00000 {
diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
index 0e0b9bc..8a14b2b 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
@@ -95,11 +95,15 @@ &funnel3 {
 };
 
 &funnel4 {
-	status = "okay";
+	// FIXME: Figure out why clock late_initcall crashes the board with
+	// this enabled.
+	// status = "okay";
 };
 
 &funnel5 {
-	status = "okay";
+	// FIXME: Figure out why clock late_initcall crashes the board with
+	// this enabled.
+	// status = "okay";
 };
 
 &pm8005_lsid1 {
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 91f7f2d..c07fee6 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -130,7 +130,7 @@ cpus {
 
 		CPU0: cpu@0 {
 			device_type = "cpu";
-			compatible = "arm,armv8";
+			compatible = "qcom,kryo280";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
 			cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
@@ -149,7 +149,7 @@ L1_D_0: l1-dcache {
 
 		CPU1: cpu@1 {
 			device_type = "cpu";
-			compatible = "arm,armv8";
+			compatible = "qcom,kryo280";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
 			cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
@@ -164,7 +164,7 @@ L1_D_1: l1-dcache {
 
 		CPU2: cpu@2 {
 			device_type = "cpu";
-			compatible = "arm,armv8";
+			compatible = "qcom,kryo280";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
 			cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
@@ -179,7 +179,7 @@ L1_D_2: l1-dcache {
 
 		CPU3: cpu@3 {
 			device_type = "cpu";
-			compatible = "arm,armv8";
+			compatible = "qcom,kryo280";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
 			cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
@@ -194,7 +194,7 @@ L1_D_3: l1-dcache {
 
 		CPU4: cpu@100 {
 			device_type = "cpu";
-			compatible = "arm,armv8";
+			compatible = "qcom,kryo280";
 			reg = <0x0 0x100>;
 			enable-method = "psci";
 			cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
@@ -213,7 +213,7 @@ L1_D_100: l1-dcache {
 
 		CPU5: cpu@101 {
 			device_type = "cpu";
-			compatible = "arm,armv8";
+			compatible = "qcom,kryo280";
 			reg = <0x0 0x101>;
 			enable-method = "psci";
 			cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
@@ -228,7 +228,7 @@ L1_D_101: l1-dcache {
 
 		CPU6: cpu@102 {
 			device_type = "cpu";
-			compatible = "arm,armv8";
+			compatible = "qcom,kryo280";
 			reg = <0x0 0x102>;
 			enable-method = "psci";
 			cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
@@ -243,7 +243,7 @@ L1_D_102: l1-dcache {
 
 		CPU7: cpu@103 {
 			device_type = "cpu";
-			compatible = "arm,armv8";
+			compatible = "qcom,kryo280";
 			reg = <0x0 0x103>;
 			enable-method = "psci";
 			cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
diff --git a/arch/arm64/boot/dts/qcom/pm6150.dtsi b/arch/arm64/boot/dts/qcom/pm6150.dtsi
index 2353463..57af0b4 100644
--- a/arch/arm64/boot/dts/qcom/pm6150.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi
@@ -20,7 +20,7 @@ pm6150_pon: pon@800 {
 			mode-bootloader = <0x2>;
 			mode-recovery = <0x1>;
 
-			pwrkey {
+			pm6150_pwrkey: pwrkey {
 				compatible = "qcom,pm8941-pwrkey";
 				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
 				debounce = <15625>;
diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi
index dc2ce23..67283d6 100644
--- a/arch/arm64/boot/dts/qcom/pm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi
@@ -45,7 +45,7 @@ pm8998_pon: pon@800 {
 			mode-bootloader = <0x2>;
 			mode-recovery = <0x1>;
 
-			pwrkey {
+			pm8998_pwrkey: pwrkey {
 				compatible = "qcom,pm8941-pwrkey";
 				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
 				debounce = <15625>;
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
index 522d3ef..afe69e8 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -200,6 +200,7 @@ vreg_l13_3p3: l13 {
 &sdcc1 {
 	status = "ok";
 
+	supports-cqe;
 	mmc-ddr-1_8v;
 	mmc-hs400-1_8v;
 	bus-width = <8>;
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index 4ee1e3d..f149a53 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -685,9 +685,9 @@ pcie_phy: phy@7786000 {
 		};
 
 		sdcc1: sdcc@7804000 {
-			compatible = "qcom,sdhci-msm-v5";
+			compatible = "qcom,qcs404-sdhci", "qcom,sdhci-msm-v5";
 			reg = <0x07804000 0x1000>, <0x7805000 0x1000>;
-			reg-names = "hc_mem", "cmdq_mem";
+			reg-names = "hc", "cqhci";
 
 			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index 388f50a..043c9b9 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -7,6 +7,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "sc7180.dtsi"
 #include "pm6150.dtsi"
@@ -17,6 +18,7 @@ / {
 	compatible = "qcom,sc7180-idp", "qcom,sc7180";
 
 	aliases {
+		bluetooth0 = &bluetooth;
 		hsuart0 = &uart3;
 		serial0 = &uart8;
 	};
@@ -101,9 +103,9 @@ vreg_l11a_1p8: ldo11 {
 		};
 
 		vreg_l12a_1p8: ldo12 {
-			regulator-min-microvolt = <1696000>;
-			regulator-max-microvolt = <1952000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l13a_1p8: ldo13 {
@@ -143,9 +145,9 @@ vreg_l18a_2p8: ldo18 {
 		};
 
 		vreg_l19a_2p9: ldo19 {
-			regulator-min-microvolt = <2696000>;
-			regulator-max-microvolt = <3304000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 	};
 
@@ -189,9 +191,9 @@ vreg_l5c_1p8: ldo5 {
 		};
 
 		vreg_l6c_2p9: ldo6 {
-			regulator-min-microvolt = <2696000>;
-			regulator-max-microvolt = <3304000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l7c_3p0: ldo7 {
@@ -207,9 +209,9 @@ vreg_l8c_1p8: ldo8 {
 		};
 
 		vreg_l9c_2p9: ldo9 {
-			regulator-min-microvolt = <2952000>;
-			regulator-max-microvolt = <3304000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l10c_3p3: ldo10 {
@@ -254,8 +256,40 @@ &qupv3_id_1 {
 	status = "okay";
 };
 
+&sdhc_1 {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc1_on>;
+	pinctrl-1 = <&sdc1_off>;
+	vmmc-supply = <&vreg_l19a_2p9>;
+	vqmmc-supply = <&vreg_l12a_1p8>;
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&sdc2_on>;
+	pinctrl-1 = <&sdc2_off>;
+	vmmc-supply  = <&vreg_l9c_2p9>;
+	vqmmc-supply = <&vreg_l6c_2p9>;
+
+	cd-gpios = <&tlmm 69 GPIO_ACTIVE_LOW>;
+};
+
 &uart3 {
 	status = "okay";
+
+	bluetooth: wcn3990-bt {
+		compatible = "qcom,wcn3990-bt";
+		vddio-supply = <&vreg_l10a_1p8>;
+		vddxo-supply = <&vreg_l1c_1p8>;
+		vddrf-supply = <&vreg_l2c_1p3>;
+		vddch0-supply = <&vreg_l10c_3p3>;
+		max-speed = <3200000>;
+		clocks = <&rpmhcc RPMH_RF_CLK2>;
+	};
 };
 
 &uart8 {
@@ -287,6 +321,12 @@ &usb_1_qmpphy {
 	vdda-pll-supply = <&vreg_l4a_0p8>;
 };
 
+&venus {
+	video-firmware {
+		iommus = <&apps_smmu 0x0c42 0x0>;
+	};
+};
+
 /* PINCTRL - additions to nodes defined in sc7180.dtsi */
 
 &qspi_clk {
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 8011c5f..998f101 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -5,8 +5,11 @@
  * Copyright (c) 2019, The Linux Foundation. All rights reserved.
  */
 
+#include <dt-bindings/clock/qcom,dispcc-sc7180.h>
 #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+#include <dt-bindings/clock/qcom,gpucc-sc7180.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,videocc-sc7180.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/phy/phy-qcom-qusb2.h>
 #include <dt-bindings/power/qcom-aoss-qmp.h>
@@ -75,6 +78,11 @@ smem_mem: memory@80900000 {
 			reg = <0x0 0x80900000 0x0 0x200000>;
 			no-map;
 		};
+
+		venus_mem: memory@8f600000 {
+			reg = <0 0x8f600000 0 0x500000>;
+			no-map;
+		};
 	};
 
 	cpus {
@@ -86,6 +94,8 @@ CPU0: cpu@0 {
 			compatible = "arm,armv8";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
 			next-level-cache = <&L2_0>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
@@ -103,6 +113,8 @@ CPU1: cpu@100 {
 			compatible = "arm,armv8";
 			reg = <0x0 0x100>;
 			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
 			next-level-cache = <&L2_100>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
@@ -117,6 +129,8 @@ CPU2: cpu@200 {
 			compatible = "arm,armv8";
 			reg = <0x0 0x200>;
 			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
 			next-level-cache = <&L2_200>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
@@ -131,6 +145,8 @@ CPU3: cpu@300 {
 			compatible = "arm,armv8";
 			reg = <0x0 0x300>;
 			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
 			next-level-cache = <&L2_300>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
@@ -145,6 +161,8 @@ CPU4: cpu@400 {
 			compatible = "arm,armv8";
 			reg = <0x0 0x400>;
 			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
 			next-level-cache = <&L2_400>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
@@ -159,6 +177,8 @@ CPU5: cpu@500 {
 			compatible = "arm,armv8";
 			reg = <0x0 0x500>;
 			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
 			next-level-cache = <&L2_500>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
@@ -173,6 +193,8 @@ CPU6: cpu@600 {
 			compatible = "arm,armv8";
 			reg = <0x0 0x600>;
 			enable-method = "psci";
+			capacity-dmips-mhz = <1740>;
+			dynamic-power-coefficient = <405>;
 			next-level-cache = <&L2_600>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
@@ -187,6 +209,8 @@ CPU7: cpu@700 {
 			compatible = "arm,armv8";
 			reg = <0x0 0x700>;
 			enable-method = "psci";
+			capacity-dmips-mhz = <1740>;
+			dynamic-power-coefficient = <405>;
 			next-level-cache = <&L2_700>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
@@ -195,6 +219,42 @@ L2_700: l2-cache {
 				next-level-cache = <&L3_0>;
 			};
 		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+
+				core4 {
+					cpu = <&CPU4>;
+				};
+
+				core5 {
+					cpu = <&CPU5>;
+				};
+
+				core6 {
+					cpu = <&CPU6>;
+				};
+
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
 	};
 
 	memory@80000000 {
@@ -299,7 +359,7 @@ psci {
 		method = "smc";
 	};
 
-	soc: soc {
+	soc: soc@0 {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges = <0 0 0 0 0x10 0>;
@@ -310,8 +370,9 @@ gcc: clock-controller@100000 {
 			compatible = "qcom,gcc-sc7180";
 			reg = <0 0x00100000 0 0x1f0000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK_A>;
-			clock-names = "bi_tcxo", "bi_tcxo_ao";
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>;
+			clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
@@ -329,6 +390,33 @@ qusb2p_hstx_trim: hstx-trim-primary@25b {
 			};
 		};
 
+		sdhc_1: sdhci@7c4000 {
+			compatible = "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x7c4000 0 0x1000>,
+				<0 0x07c5000 0 0x1000>;
+			reg-names = "hc", "cqhci";
+
+			iommus = <&apps_smmu 0x60 0x0>;
+			interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
+					<&gcc GCC_SDCC1_AHB_CLK>;
+			clock-names = "core", "iface";
+
+			bus-width = <8>;
+			non-removable;
+			supports-cqe;
+
+			mmc-ddr-1_8v;
+			mmc-hs200-1_8v;
+			mmc-hs400-1_8v;
+			mmc-hs400-enhanced-strobe;
+
+			status = "disabled";
+		};
+
 		qupv3_id_0: geniqup@8c0000 {
 			compatible = "qcom,geni-se-qup";
 			reg = <0 0x008c0000 0 0x6000>;
@@ -338,6 +426,7 @@ qupv3_id_0: geniqup@8c0000 {
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
+			iommus = <&apps_smmu 0x43 0x0>;
 			status = "disabled";
 
 			i2c0: i2c@880000 {
@@ -546,6 +635,7 @@ qupv3_id_1: geniqup@ac0000 {
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
+			iommus = <&apps_smmu 0x4c3 0x0>;
 			status = "disabled";
 
 			i2c6: i2c@a80000 {
@@ -745,6 +835,69 @@ uart11: serial@a94000 {
 			};
 		};
 
+		config_noc: interconnect@1500000 {
+			compatible = "qcom,sc7180-config-noc";
+			reg = <0 0x01500000 0 0x28000>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system_noc: interconnect@1620000 {
+			compatible = "qcom,sc7180-system-noc";
+			reg = <0 0x01620000 0 0x17080>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mc_virt: interconnect@1638000 {
+			compatible = "qcom,sc7180-mc-virt";
+			reg = <0 0x01638000 0 0x1000>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		qup_virt: interconnect@1650000 {
+			compatible = "qcom,sc7180-qup-virt";
+			reg = <0 0x01650000 0 0x1000>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,sc7180-aggre1-noc";
+			reg = <0 0x016e0000 0 0x15080>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre2_noc: interconnect@1705000 {
+			compatible = "qcom,sc7180-aggre2-noc";
+			reg = <0 0x01705000 0 0x9000>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		compute_noc: interconnect@170e000 {
+			compatible = "qcom,sc7180-compute-noc";
+			reg = <0 0x0170e000 0 0x6000>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mmss_noc: interconnect@1740000 {
+			compatible = "qcom,sc7180-mmss-noc";
+			reg = <0 0x01740000 0 0x1c100>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		ipa_virt: interconnect@1e00000 {
+			compatible = "qcom,sc7180-ipa-virt";
+			reg = <0 0x01e00000 0 0x1000>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
 		tcsr_mutex_regs: syscon@1f40000 {
 			compatible = "syscon";
 			reg = <0 0x01f40000 0 0x40000>;
@@ -1037,6 +1190,140 @@ pinmux {
 					function = "qup15";
 				};
 			};
+
+			sdc1_on: sdc1-on {
+				pinconf-clk {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				pinconf-cmd {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				pinconf-data {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				pinconf-rclk {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc1_off: sdc1-off {
+				pinconf-clk {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				pinconf-cmd {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				pinconf-data {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				pinconf-rclk {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc2_on: sdc2-on {
+				pinconf-clk {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				pinconf-cmd {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				pinconf-data {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				pinconf-sd-cd {
+					pins = "gpio69";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+			};
+
+			sdc2_off: sdc2-off {
+				pinconf-clk {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				pinconf-cmd {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				pinconf-data {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				pinconf-sd-cd {
+					pins = "gpio69";
+					bias-disable;
+					drive-strength = <2>;
+				};
+			};
+		};
+
+		sdhc_2: sdhci@8804000 {
+			compatible = "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x08804000 0 0x1000>;
+
+			iommus = <&apps_smmu 0x80 0>;
+			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_APPS_CLK>,
+					<&gcc GCC_SDCC2_AHB_CLK>;
+			clock-names = "core", "iface";
+
+			bus-width = <4>;
+
+			status = "disabled";
+		};
+
+		gpucc: clock-controller@5090000 {
+			compatible = "qcom,sc7180-gpucc";
+			reg = <0 0x05090000 0 0x9000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			clock-names = "bi_tcxo",
+				      "gcc_gpu_gpll0_clk_src",
+				      "gcc_gpu_gpll0_div_clk_src";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
 		};
 
 		qspi: spi@88dc000 {
@@ -1081,8 +1368,8 @@ usb_1_qmpphy: phy-wrapper@88e9000 {
 				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
 			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
 
-			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
-				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
+			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
 			reset-names = "phy", "common";
 
 			usb_1_ssphy: phy@88e9200 {
@@ -1100,6 +1387,13 @@ usb_1_ssphy: phy@88e9200 {
 			};
 		};
 
+		dc_noc: interconnect@9160000 {
+			compatible = "qcom,sc7180-dc-noc";
+			reg = <0 0x09160000 0 0x03200>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
 		system-cache-controller@9200000 {
 			compatible = "qcom,sc7180-llcc";
 			reg = <0 0x09200000 0 0x200000>, <0 0x09600000 0 0x50000>;
@@ -1107,6 +1401,20 @@ system-cache-controller@9200000 {
 			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		gem_noc: interconnect@9680000 {
+			compatible = "qcom,sc7180-gem-noc";
+			reg = <0 0x09680000 0 0x3e200>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		npu_noc: interconnect@9990000 {
+			compatible = "qcom,sc7180-npu-noc";
+			reg = <0 0x09990000 0 0x1600>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
 		usb_1: usb@a6f8800 {
 			compatible = "qcom,sc7180-dwc3", "qcom,dwc3";
 			reg = <0 0x0a6f8800 0 0x400>;
@@ -1151,6 +1459,201 @@ usb_1_dwc3: dwc3@a600000 {
 			};
 		};
 
+		venus: video-codec@aa00000 {
+			compatible = "qcom,sc7180-venus";
+			reg = <0 0x0aa00000 0 0xff000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&videocc VENUS_GDSC>,
+					<&videocc VCODEC0_GDSC>;
+			power-domain-names = "venus", "vcodec0";
+			clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
+				 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
+				 <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
+				 <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
+				 <&videocc VIDEO_CC_VCODEC0_AXI_CLK>;
+			clock-names = "core", "iface", "bus",
+				      "vcodec0_core", "vcodec0_bus";
+			iommus = <&apps_smmu 0x0c00 0x60>;
+			memory-region = <&venus_mem>;
+
+			video-decoder {
+				compatible = "venus-decoder";
+			};
+
+			video-encoder {
+				compatible = "venus-encoder";
+			};
+		};
+
+		videocc: clock-controller@ab00000 {
+			compatible = "qcom,sc7180-videocc";
+			reg = <0 0x0ab00000 0 0x10000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "bi_tcxo";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		camnoc_virt: interconnect@ac00000 {
+			compatible = "qcom,sc7180-camnoc-virt";
+			reg = <0 0x0ac00000 0 0x1000>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mdss: mdss@ae00000 {
+			compatible = "qcom,sc7180-mdss";
+			reg = <0 0x0ae00000 0 0x1000>;
+			reg-names = "mdss";
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface", "bus", "ahb", "core";
+
+			assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>;
+			assigned-clock-rates = <300000000>;
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			iommus = <&apps_smmu 0x800 0x2>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdp: mdp@ae01000 {
+				compatible = "qcom,sc7180-dpu";
+				reg = <0 0x0ae01000 0 0x8f000>,
+				      <0 0x0aeb0000 0 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_ROT_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "iface", "rot", "lut", "core",
+					      "vsync";
+				assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
+						  <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <300000000>,
+						       <19200000>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&dsi0_in>;
+						};
+					};
+				};
+			};
+
+			dsi0: dsi@ae94000 {
+				compatible = "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae94000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				phys = <&dsi_phy>;
+				phy-names = "dsi";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			dsi_phy: dsi-phy@ae94400 {
+				compatible = "qcom,dsi-phy-10nm";
+				reg = <0 0x0ae94400 0 0x200>,
+				      <0 0x0ae94600 0 0x280>,
+				      <0 0x0ae94a00 0 0x1e0>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sc7180-dispcc";
+			reg = <0 0x0af00000 0 0x200000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+				 <&dsi_phy 0>,
+				 <&dsi_phy 1>,
+				 <0>,
+				 <0>;
+			clock-names = "bi_tcxo",
+				      "gcc_disp_gpll0_clk_src",
+				      "dsi0_phy_pll_out_byteclk",
+				      "dsi0_phy_pll_out_dsiclk",
+				      "dp_phy_pll_link_clk",
+				      "dp_phy_pll_vco_div_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,sc7180-pdc", "qcom,pdc";
 			reg = <0 0x0b220000 0 0x30000>;
@@ -1478,6 +1981,20 @@ rpmhpd_opp_turbo_l1: opp11 {
 					};
 				};
 			};
+
+			apps_bcm_voter: bcm_voter {
+				compatible = "qcom,bcm-voter";
+			};
+		};
+
+		osm_l3: interconnect@18321000 {
+			compatible = "qcom,sc7180-osm-l3";
+			reg = <0 0x18321000 0 0x1400>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#interconnect-cells = <1>;
 		};
 
 		cpufreq_hw: cpufreq@18323000 {
@@ -1953,6 +2470,12 @@ aoss0_alert0: trip-point0 {
 					hysteresis = <2000>;
 					type = "hot";
 				};
+
+				aoss0_crit: aoss0_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
 			};
 		};
 
@@ -2008,6 +2531,12 @@ gpuss0_alert0: trip-point0 {
 					hysteresis = <2000>;
 					type = "hot";
 				};
+
+				gpuss0_crit: gpuss0_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
 			};
 		};
 
@@ -2023,6 +2552,12 @@ gpuss1_alert0: trip-point0 {
 					hysteresis = <2000>;
 					type = "hot";
 				};
+
+				gpuss1_crit: gpuss1_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
 			};
 		};
 
@@ -2038,6 +2573,12 @@ aoss1_alert0: trip-point0 {
 					hysteresis = <2000>;
 					type = "hot";
 				};
+
+				aoss1_crit: aoss1_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
 			};
 		};
 
@@ -2053,6 +2594,12 @@ cwlan_alert0: trip-point0 {
 					hysteresis = <2000>;
 					type = "hot";
 				};
+
+				cwlan_crit: cwlan_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
 			};
 		};
 
@@ -2068,6 +2615,12 @@ audio_alert0: trip-point0 {
 					hysteresis = <2000>;
 					type = "hot";
 				};
+
+				audio_crit: audio_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
 			};
 		};
 
@@ -2083,6 +2636,12 @@ ddr_alert0: trip-point0 {
 					hysteresis = <2000>;
 					type = "hot";
 				};
+
+				ddr_crit: ddr_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
 			};
 		};
 
@@ -2098,6 +2657,12 @@ q6_hvx_alert0: trip-point0 {
 					hysteresis = <2000>;
 					type = "hot";
 				};
+
+				q6_hvx_crit: q6_hvx_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
 			};
 		};
 
@@ -2113,6 +2678,12 @@ camera_alert0: trip-point0 {
 					hysteresis = <2000>;
 					type = "hot";
 				};
+
+				camera_crit: camera_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
 			};
 		};
 
@@ -2128,6 +2699,12 @@ mdm_alert0: trip-point0 {
 					hysteresis = <2000>;
 					type = "hot";
 				};
+
+				mdm_crit: mdm_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
 			};
 		};
 
@@ -2143,6 +2720,12 @@ mdm_dsp_alert0: trip-point0 {
 					hysteresis = <2000>;
 					type = "hot";
 				};
+
+				mdm_dsp_crit: mdm_dsp_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
 			};
 		};
 
@@ -2158,6 +2741,12 @@ npu_alert0: trip-point0 {
 					hysteresis = <2000>;
 					type = "hot";
 				};
+
+				npu_crit: npu_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
 			};
 		};
 
@@ -2173,6 +2762,12 @@ video_alert0: trip-point0 {
 					hysteresis = <2000>;
 					type = "hot";
 				};
+
+				video_crit: video_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
 			};
 		};
 	};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
index 7b53b3c..9070be4 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
@@ -614,6 +614,11 @@ touchscreen@10 {
 	};
 };
 
+&ipa {
+	status = "okay";
+	modem-init;
+};
+
 &lpasscc {
 	status = "okay";
 };
@@ -626,6 +631,10 @@ &mdss_mdp {
 	status = "okay";
 };
 
+&pm8998_pwrkey {
+	status = "disabled";
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
@@ -1292,3 +1301,9 @@ config {
 		};
 	};
 };
+
+&venus {
+	video-firmware {
+		iommus = <&apps_smmu 0x10b2 0x0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index eb77aaa..a2e0592 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -8,6 +8,8 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
 #include "sdm845.dtsi"
 #include "pm8998.dtsi"
 #include "pmi8998.dtsi"
@@ -359,11 +361,56 @@ zap-shader {
 	};
 };
 
+&i2c11 {
+	/* On Low speed expansion */
+	label = "LS-I2C1";
+	status = "okay";
+};
+
+&i2c14 {
+	/* On Low speed expansion */
+	label = "LS-I2C0";
+	status = "okay";
+};
+
 &mss_pil {
 	status = "okay";
 	firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn";
 };
 
+&pcie0 {
+	status = "okay";
+	perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>;
+	enable-gpio = <&tlmm 134 GPIO_ACTIVE_HIGH>;
+
+	vddpe-3v3-supply = <&pcie0_3p3v_dual>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_default_state>;
+};
+
+&pcie0_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l26a_1p2>;
+};
+
+&pcie1 {
+	status = "okay";
+	perst-gpio = <&tlmm 102 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_default_state>;
+};
+
+&pcie1_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l26a_1p2>;
+};
+
 &pm8998_gpio {
 	vol_up_pin_a: vol-up-active {
 		pins = "gpio6";
@@ -384,6 +431,37 @@ resin {
 	};
 };
 
+/* QUAT I2S Uses 4 I2S SD Lines for audio on LT9611 HDMI Bridge */
+&q6afedai {
+	qi2s@22 {
+		reg = <22>;
+		qcom,sd-lines = <0 1 2 3>;
+	};
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+		direction = <2>;
+	};
+
+	dai@1 {
+		reg = <1>;
+		direction = <2>;
+	};
+
+	dai@2 {
+		reg = <2>;
+		direction = <1>;
+	};
+
+	dai@3 {
+		reg = <3>;
+		direction = <2>;
+		is-compress-dai;
+	};
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
@@ -405,7 +483,121 @@ &sdhc_2 {
 	cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
 };
 
+&sound {
+	compatible = "qcom,db845c-sndcard";
+	pinctrl-0 = <&quat_mi2s_active
+			 &quat_mi2s_sd0_active
+			 &quat_mi2s_sd1_active
+			 &quat_mi2s_sd2_active
+			 &quat_mi2s_sd3_active>;
+	pinctrl-names = "default";
+	model = "DB845c";
+	audio-routing =
+		"RX_BIAS", "MCLK",
+		"AMIC1", "MIC BIAS1",
+		"AMIC2", "MIC BIAS2",
+		"DMIC0", "MIC BIAS1",
+		"DMIC1", "MIC BIAS1",
+		"DMIC2", "MIC BIAS3",
+		"DMIC3", "MIC BIAS3",
+		"SpkrLeft IN", "SPK1 OUT",
+		"SpkrRight IN", "SPK2 OUT",
+		"MM_DL1",  "MultiMedia1 Playback",
+		"MM_DL2",  "MultiMedia2 Playback",
+		"MM_DL4",  "MultiMedia4 Playback",
+		"MultiMedia3 Capture", "MM_UL3";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	mm2-dai-link {
+		link-name = "MultiMedia2";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	mm3-dai-link {
+		link-name = "MultiMedia3";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	mm4-dai-link {
+		link-name = "MultiMedia4";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA4>;
+		};
+	};
+
+	slim-dai-link {
+		link-name = "SLIM Playback";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai =  <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>;
+		};
+	};
+
+	slimcap-dai-link {
+		link-name = "SLIM Capture";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9340 1>;
+		};
+	};
+};
+
+&spi2 {
+	/* On Low speed expansion */
+	label = "LS-SPI0";
+	status = "okay";
+};
+
 &tlmm {
+	pcie0_default_state: pcie0-default {
+		clkreq {
+			pins = "gpio36";
+			function = "pci_e0";
+			bias-pull-up;
+		};
+
+		reset-n {
+			pins = "gpio35";
+			function = "gpio";
+
+			drive-strength = <2>;
+			output-low;
+			bias-pull-down;
+		};
+
+		wake-n {
+			pins = "gpio37";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
 	pcie0_pwren_state: pcie0-pwren {
 		pins = "gpio90";
 		function = "gpio";
@@ -414,6 +606,39 @@ pcie0_pwren_state: pcie0-pwren {
 		bias-disable;
 	};
 
+	pcie1_default_state: pcie1-default {
+		perst-n {
+			pins = "gpio102";
+			function = "gpio";
+
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		clkreq {
+			pins = "gpio103";
+			function = "pci_e1";
+			bias-pull-up;
+		};
+
+		wake-n {
+			pins = "gpio11";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		reset-n {
+			pins = "gpio75";
+			function = "gpio";
+
+			drive-strength = <16>;
+			bias-pull-up;
+			output-high;
+		};
+	};
+
 	sdc2_default_state: sdc2-default {
 		clk {
 			pins = "sdc2_clk";
@@ -444,6 +669,20 @@ sdc2_card_det_n: sd-card-det-n {
 		function = "gpio";
 		bias-pull-up;
 	};
+
+	wcd_intr_default: wcd_intr_default {
+		pins = <54>;
+		function = "gpio";
+
+		input-enable;
+		bias-pull-down;
+		drive-strength = <2>;
+	};
+};
+
+&uart3 {
+	label = "LS-UART0";
+	status = "disabled";
 };
 
 &uart6 {
@@ -461,6 +700,7 @@ bluetooth {
 };
 
 &uart9 {
+	label = "LS-UART1";
 	status = "okay";
 };
 
@@ -534,6 +774,39 @@ &ufs_mem_phy {
 	vdda-pll-supply = <&vreg_l26a_1p2>;
 };
 
+&wcd9340{
+	pinctrl-0 = <&wcd_intr_default>;
+	pinctrl-names = "default";
+	clock-names = "extclk";
+	clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
+	reset-gpios = <&tlmm 64 0>;
+	vdd-buck-supply = <&vreg_s4a_1p8>;
+	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+	vdd-tx-supply = <&vreg_s4a_1p8>;
+	vdd-rx-supply = <&vreg_s4a_1p8>;
+	vdd-io-supply = <&vreg_s4a_1p8>;
+
+	swm: swm@c85 {
+		left_spkr: wsa8810-left{
+			compatible = "sdw10217201000";
+			reg = <0 1>;
+			powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>;
+			#thermal-sensor-cells = <0>;
+			sound-name-prefix = "SpkrLeft";
+			#sound-dai-cells = <0>;
+		};
+
+		right_spkr: wsa8810-right{
+			compatible = "sdw10217201000";
+			powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>;
+			reg = <0 2>;
+			#thermal-sensor-cells = <0>;
+			sound-name-prefix = "SpkrRight";
+			#sound-dai-cells = <0>;
+		};
+	};
+};
+
 &wifi {
 	status = "okay";
 
@@ -546,6 +819,16 @@ &wifi {
 };
 
 /* PINCTRL - additions to nodes defined in sdm845.dtsi */
+&qup_spi2_default {
+	drive-strength = <16>;
+};
+
+&qup_uart3_default{
+	pinmux {
+		pins = "gpio41", "gpio42", "gpio43", "gpio44";
+		function = "qup3";
+	};
+};
 
 &qup_uart6_default {
 	pinmux {
diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
index 09ad37b..023e8b0 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@@ -50,6 +50,7 @@ vreg_s4a_1p8: pm8998-smps4 {
 
 &adsp_pas {
 	status = "okay";
+	firmware-name = "qcom/sdm845/adsp.mdt";
 };
 
 &apps_rsc {
@@ -350,6 +351,81 @@ vreg_s3c_0p6: smps3 {
 
 &cdsp_pas {
 	status = "okay";
+	firmware-name = "qcom/sdm845/cdsp.mdt";
+};
+
+&dsi0 {
+	status = "okay";
+	vdda-supply = <&vdda_mipi_dsi0_1p2>;
+
+	qcom,dual-dsi-mode;
+	qcom,master-dsi;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&truly_in_0>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+
+	panel@0 {
+		compatible = "truly,nt35597-2K-display";
+		reg = <0>;
+		vdda-supply = <&vreg_l14a_1p88>;
+
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+		mode-gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				truly_in_0: endpoint {
+					remote-endpoint = <&dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				truly_in_1: endpoint {
+					remote-endpoint = <&dsi1_out>;
+				};
+			};
+		};
+	};
+};
+
+&dsi0_phy {
+	status = "okay";
+	vdds-supply = <&vdda_mipi_dsi0_pll>;
+};
+
+&dsi1 {
+	status = "okay";
+	vdda-supply = <&vdda_mipi_dsi1_1p2>;
+
+	qcom,dual-dsi-mode;
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&truly_in_1>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&dsi1_phy {
+	status = "okay";
+	vdds-supply = <&vdda_mipi_dsi1_pll>;
 };
 
 &gcc {
@@ -372,6 +448,19 @@ &i2c10 {
 	clock-frequency = <400000>;
 };
 
+&mdss {
+	status = "okay";
+};
+
+&mdss_mdp {
+	status = "okay";
+};
+
+&mss_pil {
+	status = "okay";
+	firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn";
+};
+
 &qupv3_id_1 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index d42302b..8f926b5 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -17,6 +17,7 @@
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/reset/qcom,sdm845-aoss.h>
 #include <dt-bindings/reset/qcom,sdm845-pdc.h>
+#include <dt-bindings/soc/qcom,apr.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/clock/qcom,gcc-sdm845.h>
 #include <dt-bindings/thermal/thermal.h>
@@ -491,6 +492,57 @@ glink-edge {
 			label = "lpass";
 			qcom,remote-pid = <2>;
 			mboxes = <&apss_shared 8>;
+
+			apr {
+				compatible = "qcom,apr-v2";
+				qcom,glink-channels = "apr_audio_svc";
+				qcom,apr-domain = <APR_DOMAIN_ADSP>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				qcom,intents = <512 20>;
+
+				apr-service@3 {
+					reg = <APR_SVC_ADSP_CORE>;
+					compatible = "qcom,q6core";
+					qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+				};
+
+				q6afe: apr-service@4 {
+					compatible = "qcom,q6afe";
+					reg = <APR_SVC_AFE>;
+					qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+					q6afedai: dais {
+						compatible = "qcom,q6afe-dais";
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#sound-dai-cells = <1>;
+					};
+				};
+
+				q6asm: apr-service@7 {
+					compatible = "qcom,q6asm";
+					reg = <APR_SVC_ASM>;
+					qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+					q6asmdai: dais {
+						compatible = "qcom,q6asm-dais";
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#sound-dai-cells = <1>;
+						iommus = <&apps_smmu 0x1821 0x0>;
+					};
+				};
+
+				q6adm: apr-service@8 {
+					compatible = "qcom,q6adm";
+					reg = <APR_SVC_ADM>;
+					qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+					q6routing: routing {
+						compatible = "qcom,q6adm-routing";
+						#sound-dai-cells = <0>;
+					};
+				};
+			};
+
 			fastrpc {
 				compatible = "qcom,fastrpc";
 				qcom,glink-channels = "fastrpcglink-apps-dsp";
@@ -675,6 +727,17 @@ modem_smp2p_in: slave-kernel {
 			interrupt-controller;
 			#interrupt-cells = <2>;
 		};
+
+		ipa_smp2p_out: ipa-ap-to-modem {
+			qcom,entry-name = "ipa";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		ipa_smp2p_in: ipa-modem-to-ap {
+			qcom,entry-name = "ipa";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
 	};
 
 	smp2p-slpi {
@@ -1364,6 +1427,267 @@ system-cache-controller@1100000 {
 			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		pcie0: pci@1c00000 {
+			compatible = "qcom,pcie-sdm845", "snps,dw-pcie";
+			reg = <0 0x01c00000 0 0x2000>,
+			      <0 0x60000000 0 0xf1d>,
+			      <0 0x60000f20 0 0xa8>,
+			      <0 0x60100000 0 0x100000>;
+			reg-names = "parf", "dbi", "elbi", "config";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0xd00000>;
+
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+				 <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+			clock-names = "pipe",
+				      "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "tbu";
+
+			iommus = <&apps_smmu 0x1c10 0xf>;
+			iommu-map = <0x0   &apps_smmu 0x1c10 0x1>,
+				    <0x100 &apps_smmu 0x1c11 0x1>,
+				    <0x200 &apps_smmu 0x1c12 0x1>,
+				    <0x300 &apps_smmu 0x1c13 0x1>,
+				    <0x400 &apps_smmu 0x1c14 0x1>,
+				    <0x500 &apps_smmu 0x1c15 0x1>,
+				    <0x600 &apps_smmu 0x1c16 0x1>,
+				    <0x700 &apps_smmu 0x1c17 0x1>,
+				    <0x800 &apps_smmu 0x1c18 0x1>,
+				    <0x900 &apps_smmu 0x1c19 0x1>,
+				    <0xa00 &apps_smmu 0x1c1a 0x1>,
+				    <0xb00 &apps_smmu 0x1c1b 0x1>,
+				    <0xc00 &apps_smmu 0x1c1c 0x1>,
+				    <0xd00 &apps_smmu 0x1c1d 0x1>,
+				    <0xe00 &apps_smmu 0x1c1e 0x1>,
+				    <0xf00 &apps_smmu 0x1c1f 0x1>;
+
+			resets = <&gcc GCC_PCIE_0_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_0_GDSC>;
+
+			phys = <&pcie0_lane>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+		};
+
+		pcie0_phy: phy@1c06000 {
+			compatible = "qcom,sdm845-qmp-pcie-phy";
+			reg = <0 0x01c06000 0 0x18c>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_CLKREF_CLK>,
+				 <&gcc GCC_PCIE_PHY_REFGEN_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "refgen";
+
+			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE_PHY_REFGEN_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			status = "disabled";
+
+			pcie0_lane: lanes@1c06200 {
+				reg = <0 0x01c06200 0 0x128>,
+				      <0 0x01c06400 0 0x1fc>,
+				      <0 0x01c06800 0 0x218>,
+				      <0 0x01c06600 0 0x70>;
+				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
+				clock-names = "pipe0";
+
+				#phy-cells = <0>;
+				clock-output-names = "pcie_0_pipe_clk";
+			};
+		};
+
+		pcie1: pci@1c08000 {
+			compatible = "qcom,pcie-sdm845", "snps,dw-pcie";
+			reg = <0 0x01c08000 0 0x2000>,
+			      <0 0x40000000 0 0xf1d>,
+			      <0 0x40000f20 0 0xa8>,
+			      <0 0x40100000 0 0x100000>;
+			reg-names = "parf", "dbi", "elbi", "config";
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
+
+			interrupts = <GIC_SPI 307 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
+				 <&gcc GCC_PCIE_1_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_CLKREF_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+			clock-names = "pipe",
+				      "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ref",
+				      "tbu";
+
+			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			iommus = <&apps_smmu 0x1c00 0xf>;
+			iommu-map = <0x0   &apps_smmu 0x1c00 0x1>,
+				    <0x100 &apps_smmu 0x1c01 0x1>,
+				    <0x200 &apps_smmu 0x1c02 0x1>,
+				    <0x300 &apps_smmu 0x1c03 0x1>,
+				    <0x400 &apps_smmu 0x1c04 0x1>,
+				    <0x500 &apps_smmu 0x1c05 0x1>,
+				    <0x600 &apps_smmu 0x1c06 0x1>,
+				    <0x700 &apps_smmu 0x1c07 0x1>,
+				    <0x800 &apps_smmu 0x1c08 0x1>,
+				    <0x900 &apps_smmu 0x1c09 0x1>,
+				    <0xa00 &apps_smmu 0x1c0a 0x1>,
+				    <0xb00 &apps_smmu 0x1c0b 0x1>,
+				    <0xc00 &apps_smmu 0x1c0c 0x1>,
+				    <0xd00 &apps_smmu 0x1c0d 0x1>,
+				    <0xe00 &apps_smmu 0x1c0e 0x1>,
+				    <0xf00 &apps_smmu 0x1c0f 0x1>;
+
+			resets = <&gcc GCC_PCIE_1_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_1_GDSC>;
+
+			phys = <&pcie1_lane>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+		};
+
+		pcie1_phy: phy@1c0a000 {
+			compatible = "qcom,sdm845-qhp-pcie-phy";
+			reg = <0 0x01c0a000 0 0x800>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_1_CLKREF_CLK>,
+				 <&gcc GCC_PCIE_PHY_REFGEN_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "refgen";
+
+			resets = <&gcc GCC_PCIE_1_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE_PHY_REFGEN_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			status = "disabled";
+
+			pcie1_lane: lanes@1c06200 {
+				reg = <0 0x01c0a800 0 0x800>,
+				      <0 0x01c0a800 0 0x800>,
+				      <0 0x01c0b800 0 0x400>;
+				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
+				clock-names = "pipe0";
+
+				#phy-cells = <0>;
+				clock-output-names = "pcie_1_pipe_clk";
+			};
+		};
+
+		mem_noc: interconnect@1380000 {
+			compatible = "qcom,sdm845-mem-noc";
+			reg = <0 0x01380000 0 0x27200>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		dc_noc: interconnect@14e0000 {
+			compatible = "qcom,sdm845-dc-noc";
+			reg = <0 0x014e0000 0 0x400>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		config_noc: interconnect@1500000 {
+			compatible = "qcom,sdm845-config-noc";
+			reg = <0 0x01500000 0 0x5080>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system_noc: interconnect@1620000 {
+			compatible = "qcom,sdm845-system-noc";
+			reg = <0 0x01620000 0 0x18080>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,sdm845-aggre1-noc";
+			reg = <0 0x016e0000 0 0x15080>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre2_noc: interconnect@1700000 {
+			compatible = "qcom,sdm845-aggre2-noc";
+			reg = <0 0x01700000 0 0x1f300>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mmss_noc: interconnect@1740000 {
+			compatible = "qcom,sdm845-mmss-noc";
+			reg = <0 0x01740000 0 0x1c100>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
 		ufs_mem_hc: ufshc@1d84000 {
 			compatible = "qcom,sdm845-ufshc", "qcom,ufshc",
 				     "jedec,ufs-2.0";
@@ -1435,6 +1759,44 @@ ufs_mem_phy_lanes: lanes@1d87400 {
 			};
 		};
 
+		ipa: ipa@1e40000 {
+			compatible = "qcom,sdm845-ipa";
+			reg = <0 0x1e40000 0 0x7000>,
+			      <0 0x1e47000 0 0x2000>,
+			      <0 0x1e04000 0 0x2c000>;
+			reg-names = "ipa-reg",
+				    "ipa-shared",
+				    "gsi";
+
+			interrupts-extended = <&intc 0 311 IRQ_TYPE_EDGE_RISING>,
+					      <&intc 0 432 IRQ_TYPE_LEVEL_HIGH>,
+					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ipa",
+					  "gsi",
+					  "ipa-clock-query",
+					  "ipa-setup-ready";
+
+			clocks = <&rpmhcc RPMH_IPA_CLK>;
+			clock-names = "core";
+
+			interconnects = <&aggre2_noc MASTER_IPA &mem_noc SLAVE_EBI1>,
+				        <&aggre2_noc MASTER_IPA &system_noc SLAVE_IMEM>,
+					<&gladiator_noc MASTER_APPSS_PROC &config_noc SLAVE_IPA_CFG>;
+			interconnect-names = "memory",
+					     "imem",
+					     "config";
+
+			qcom,smem-states = <&ipa_smp2p_out 0>,
+					   <&ipa_smp2p_out 1>;
+			qcom,smem-state-names = "ipa-clock-enabled-valid",
+						"ipa-clock-enabled";
+
+			modem-remoteproc = <&mss_pil>;
+
+			status = "disabled";
+		};
+
 		tcsr_mutex_regs: syscon@1f40000 {
 			compatible = "syscon";
 			reg = <0 0x01f40000 0 0x40000>;
@@ -1837,6 +2199,142 @@ pinmux {
 					function = "qup15";
 				};
 			};
+
+			quat_mi2s_sleep: quat_mi2s_sleep {
+				mux {
+					pins = "gpio58", "gpio59";
+					function = "gpio";
+				};
+
+				config {
+					pins = "gpio58", "gpio59";
+					drive-strength = <2>;
+					bias-pull-down;
+					input-enable;
+				};
+			};
+
+			quat_mi2s_active: quat_mi2s_active {
+				mux {
+					pins = "gpio58", "gpio59";
+					function = "qua_mi2s";
+				};
+
+				config {
+					pins = "gpio58", "gpio59";
+					drive-strength = <8>;
+					bias-disable;
+					output-high;
+				};
+			};
+
+			quat_mi2s_sd0_sleep: quat_mi2s_sd0_sleep {
+				mux {
+					pins = "gpio60";
+					function = "gpio";
+				};
+
+				config {
+					pins = "gpio60";
+					drive-strength = <2>;
+					bias-pull-down;
+					input-enable;
+				};
+			};
+
+			quat_mi2s_sd0_active: quat_mi2s_sd0_active {
+				mux {
+					pins = "gpio60";
+					function = "qua_mi2s";
+				};
+
+				config {
+					pins = "gpio60";
+					drive-strength = <8>;
+					bias-disable;
+				};
+			};
+
+			quat_mi2s_sd1_sleep: quat_mi2s_sd1_sleep {
+				mux {
+					pins = "gpio61";
+					function = "gpio";
+				};
+
+				config {
+					pins = "gpio61";
+					drive-strength = <2>;
+					bias-pull-down;
+					input-enable;
+				};
+			};
+
+			quat_mi2s_sd1_active: quat_mi2s_sd1_active {
+				mux {
+					pins = "gpio61";
+					function = "qua_mi2s";
+				};
+
+				config {
+					pins = "gpio61";
+					drive-strength = <8>;
+					bias-disable;
+				};
+			};
+
+			quat_mi2s_sd2_sleep: quat_mi2s_sd2_sleep {
+				mux {
+					pins = "gpio62";
+					function = "gpio";
+				};
+
+				config {
+					pins = "gpio62";
+					drive-strength = <2>;
+					bias-pull-down;
+					input-enable;
+				};
+			};
+
+			quat_mi2s_sd2_active: quat_mi2s_sd2_active {
+				mux {
+					pins = "gpio62";
+					function = "qua_mi2s";
+				};
+
+				config {
+					pins = "gpio62";
+					drive-strength = <8>;
+					bias-disable;
+				};
+			};
+
+			quat_mi2s_sd3_sleep: quat_mi2s_sd3_sleep {
+				mux {
+					pins = "gpio63";
+					function = "gpio";
+				};
+
+				config {
+					pins = "gpio63";
+					drive-strength = <2>;
+					bias-pull-down;
+					input-enable;
+				};
+			};
+
+			quat_mi2s_sd3_active: quat_mi2s_sd3_active {
+				mux {
+					pins = "gpio63";
+					function = "qua_mi2s";
+				};
+
+				config {
+					pins = "gpio63";
+					drive-strength = <8>;
+					bias-disable;
+				};
+			};
 		};
 
 		mss_pil: remoteproc@4080000 {
@@ -1903,8 +2401,12 @@ gpucc: clock-controller@5090000 {
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
-			clocks = <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "xo";
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			clock-names = "bi_tcxo",
+				      "gcc_gpu_gpll0_clk_src",
+				      "gcc_gpu_gpll0_div_clk_src";
 		};
 
 		stm@6002000 {
@@ -2386,6 +2888,87 @@ qspi: spi@88df000 {
 			status = "disabled";
 		};
 
+		slim: slim@171c0000 {
+			compatible = "qcom,slim-ngd-v2.1.0";
+			reg = <0 0x171c0000 0 0x2c000>;
+			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+
+			qcom,apps-ch-pipes = <0x780000>;
+			qcom,ea-pc = <0x270>;
+			status = "okay";
+			dmas =	<&slimbam 3>, <&slimbam 4>,
+				<&slimbam 5>, <&slimbam 6>;
+			dma-names = "rx", "tx", "tx2", "rx2";
+
+			iommus = <&apps_smmu 0x1806 0x0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ngd@1 {
+				reg = <1>;
+				#address-cells = <2>;
+				#size-cells = <0>;
+
+				wcd9340_ifd: ifd@0{
+					compatible = "slim217,250";
+					reg  = <0 0>;
+				};
+
+				wcd9340: codec@1{
+					compatible = "slim217,250";
+					reg  = <1 0>;
+					slim-ifc-dev  = <&wcd9340_ifd>;
+
+					#sound-dai-cells = <1>;
+
+					interrupts-extended = <&tlmm 54 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-controller;
+					#interrupt-cells = <1>;
+
+					#clock-cells = <0>;
+					clock-frequency = <9600000>;
+					clock-output-names = "mclk";
+					qcom,micbias1-millivolt = <1800>;
+					qcom,micbias2-millivolt = <1800>;
+					qcom,micbias3-millivolt = <1800>;
+					qcom,micbias4-millivolt = <1800>;
+
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					wcdgpio: gpio-controller@42 {
+						compatible = "qcom,wcd9340-gpio";
+						gpio-controller;
+						#gpio-cells = <2>;
+						reg = <0x42 0x2>;
+					};
+
+					swm: swm@c85 {
+						compatible = "qcom,soundwire-v1.3.0";
+						reg = <0xc85 0x40>;
+						interrupts-extended = <&wcd9340 20>;
+
+						qcom,dout-ports	= <6>;
+						qcom,din-ports	= <2>;
+						qcom,ports-sinterval-low =/bits/ 8  <0x07 0x1F 0x3F 0x7 0x1F 0x3F 0x0F 0x0F>;
+						qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0C 0x6 0x12 0x0D 0x07 0x0A >;
+						qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x1F 0x00 0x00 0x1F 0x00 0x00>;
+
+						#sound-dai-cells = <1>;
+						clocks = <&wcd9340>;
+						clock-names = "iface";
+						#address-cells = <2>;
+						#size-cells = <0>;
+
+
+					};
+				};
+			};
+		};
+
+		sound: sound {
+		};
+
 		usb_1_hsphy: phy@88e2000 {
 			compatible = "qcom,sdm845-qusb2-phy";
 			reg = <0 0x088e2000 0 0x400>;
@@ -2570,39 +3153,42 @@ usb_2_dwc3: dwc3@a800000 {
 			};
 		};
 
-		video-codec@aa00000 {
-			compatible = "qcom,sdm845-venus";
+		venus: video-codec@aa00000 {
+			compatible = "qcom,sdm845-venus-v2";
 			reg = <0 0x0aa00000 0 0xff000>;
 			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
-			power-domains = <&videocc VENUS_GDSC>;
+			power-domains = <&videocc VENUS_GDSC>,
+					<&videocc VCODEC0_GDSC>,
+					<&videocc VCODEC1_GDSC>;
+			power-domain-names = "venus", "vcodec0", "vcodec1";
 			clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
 				 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
-				 <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>;
-			clock-names = "core", "iface", "bus";
+				 <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
+				 <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
+				 <&videocc VIDEO_CC_VCODEC0_AXI_CLK>,
+				 <&videocc VIDEO_CC_VCODEC1_CORE_CLK>,
+				 <&videocc VIDEO_CC_VCODEC1_AXI_CLK>;
+			clock-names = "core", "iface", "bus",
+				      "vcodec0_core", "vcodec0_bus",
+				      "vcodec1_core", "vcodec1_bus";
 			iommus = <&apps_smmu 0x10a0 0x8>,
 				 <&apps_smmu 0x10b0 0x0>;
 			memory-region = <&venus_mem>;
 
 			video-core0 {
 				compatible = "venus-decoder";
-				clocks = <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
-					 <&videocc VIDEO_CC_VCODEC0_AXI_CLK>;
-				clock-names = "core", "bus";
-				power-domains = <&videocc VCODEC0_GDSC>;
 			};
 
 			video-core1 {
 				compatible = "venus-encoder";
-				clocks = <&videocc VIDEO_CC_VCODEC1_CORE_CLK>,
-					 <&videocc VIDEO_CC_VCODEC1_AXI_CLK>;
-				clock-names = "core", "bus";
-				power-domains = <&videocc VCODEC1_GDSC>;
 			};
 		};
 
 		videocc: clock-controller@ab00000 {
 			compatible = "qcom,sdm845-videocc";
 			reg = <0 0x0ab00000 0 0x10000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "bi_tcxo";
 			#clock-cells = <1>;
 			#power-domain-cells = <1>;
 			#reset-cells = <1>;
@@ -2933,6 +3519,24 @@ opp-200000000 {
 		dispcc: clock-controller@af00000 {
 			compatible = "qcom,sdm845-dispcc";
 			reg = <0 0x0af00000 0 0x10000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
+				 <&dsi0_phy 0>,
+				 <&dsi0_phy 1>,
+				 <&dsi1_phy 0>,
+				 <&dsi1_phy 1>,
+				 <0>,
+				 <0>;
+			clock-names = "bi_tcxo",
+				      "gcc_disp_gpll0_clk_src",
+				      "gcc_disp_gpll0_div_clk_src",
+				      "dsi0_phy_pll_out_byteclk",
+				      "dsi0_phy_pll_out_dsiclk",
+				      "dsi1_phy_pll_out_byteclk",
+				      "dsi1_phy_pll_out_dsiclk",
+				      "dp_link_clk_divsel_ten",
+				      "dp_vco_divided_clk_src_mux";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
@@ -3098,6 +3702,13 @@ lpasscc: clock-controller@17014000 {
 			status = "disabled";
 		};
 
+		gladiator_noc: interconnect@17900000 {
+			compatible = "qcom,sdm845-gladiator-noc";
+			reg = <0 0x17900000 0 0xd080>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
 		watchdog@17980000 {
 			compatible = "qcom,apss-wdt-sdm845", "qcom,kpss-wdt";
 			reg = <0 0x17980000 0 0x1000>;
@@ -3127,6 +3738,10 @@ apps_rsc: rsc@179c0000 {
 					  <WAKE_TCS    3>,
 					  <CONTROL_TCS 1>;
 
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
 			rpmhcc: clock-controller {
 				compatible = "qcom,sdm845-rpmh-clk";
 				#clock-cells = <1>;
@@ -3183,11 +3798,6 @@ rpmhpd_opp_turbo_l1: opp10 {
 					};
 				};
 			};
-
-			rsc_hlos: interconnect {
-				compatible = "qcom,sdm845-rsc-hlos";
-				#interconnect-cells = <1>;
-			};
 		};
 
 		intc: interrupt-controller@17a00000 {
@@ -3210,6 +3820,18 @@ msi-controller@17a40000 {
 			};
 		};
 
+		slimbam: dma@17184000 {
+			compatible = "qcom,bam-v1.7.0";
+			qcom,controlled-remotely;
+			reg = <0 0x17184000 0 0x2a000>;
+			num-channels  = <31>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <1>;
+			qcom,num-ees = <2>;
+			iommus = <&apps_smmu 0x1806 0x0>;
+		};
+
 		timer@17c90000 {
 			#address-cells = <2>;
 			#size-cells = <2>;
@@ -3268,6 +3890,16 @@ frame@17d10000 {
 			};
 		};
 
+		osm_l3: interconnect@17d41000 {
+			compatible = "qcom,sdm845-osm-l3";
+			reg = <0 0x17d41000 0 0x1400>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#interconnect-cells = <1>;
+		};
+
 		cpufreq_hw: cpufreq@17d43000 {
 			compatible = "qcom,cpufreq-hw";
 			reg = <0 0x17d43000 0 0x1400>, <0 0x17d45800 0 0x1400>;
diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index b255be3..3b617a7 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -7,7 +7,10 @@
 
 /dts-v1/;
 
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
 #include "sdm845.dtsi"
 #include "pm8998.dtsi"
 
@@ -353,6 +356,75 @@ &qupv3_id_1 {
 	status = "okay";
 };
 
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+		direction = <2>;
+	};
+
+	dai@1 {
+		reg = <1>;
+		direction = <1>;
+	};
+};
+
+&sound {
+	compatible = "qcom,db845c-sndcard";
+	model = "Lenovo-YOGA-C630-13Q50";
+
+	audio-routing =
+		"RX_BIAS", "MCLK",
+		"AMIC2", "MIC BIAS2",
+		"SpkrLeft IN", "SPK1 OUT",
+		"SpkrRight IN", "SPK2 OUT",
+		"MM_DL1",  "MultiMedia1 Playback",
+		"MultiMedia2 Capture", "MM_UL2";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	mm2-dai-link {
+		link-name = "MultiMedia2";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	slim-dai-link {
+		link-name = "SLIM Playback";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai =  <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>;
+		};
+	};
+
+	slimcap-dai-link {
+		link-name = "SLIM Capture";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9340 1>;
+		};
+	};
+};
+
 &tlmm {
 	gpio-reserved-ranges = <0 4>, <81 4>;
 
@@ -382,6 +454,15 @@ i2c12_hid_active: i2c12-hid-active {
 		bias-pull-up;
 		drive-strength = <2>;
 	};
+
+	wcd_intr_default: wcd_intr_default {
+		pins = <54>;
+		function = "gpio";
+
+		input-enable;
+		bias-pull-down;
+		drive-strength = <2>;
+	};
 };
 
 &uart6 {
@@ -465,3 +546,36 @@ &usb_2_qmpphy {
 	vdda-phy-supply = <&vdda_usb2_ss_1p2>;
 	vdda-pll-supply = <&vdda_usb2_ss_core>;
 };
+
+&wcd9340{
+	pinctrl-0 = <&wcd_intr_default>;
+	pinctrl-names = "default";
+	clock-names = "extclk";
+	clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
+	reset-gpios = <&tlmm 64 0>;
+	vdd-buck-supply = <&vreg_s4a_1p8>;
+	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+	vdd-tx-supply = <&vreg_s4a_1p8>;
+	vdd-rx-supply = <&vreg_s4a_1p8>;
+	vdd-io-supply = <&vreg_s4a_1p8>;
+
+	swm: swm@c85 {
+		left_spkr: wsa8810-left{
+			compatible = "sdw10217211000";
+			reg = <0 3>;
+			powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>;
+			#thermal-sensor-cells = <0>;
+			sound-name-prefix = "SpkrLeft";
+			#sound-dai-cells = <0>;
+		};
+
+		right_spkr: wsa8810-right{
+			compatible = "sdw10217211000";
+			powerdown-gpios = <&wcdgpio 3 GPIO_ACTIVE_HIGH>;
+			reg = <0 4>;
+			#thermal-sensor-cells = <0>;
+			sound-name-prefix = "SpkrRight";
+			#sound-dai-cells = <0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
new file mode 100644
index 0000000..224d0f1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "sm8250.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SM8250 MTP";
+	compatible = "qcom,sm8250-mtp";
+
+	aliases {
+		serial0 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
new file mode 100644
index 0000000..891d83b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -0,0 +1,444 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <38400000>;
+			clock-output-names = "xo_board";
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+				L3_0: l3-cache {
+				      compatible = "cache";
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_100>;
+			L2_100: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			next-level-cache = <&L2_200>;
+			L2_200: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			next-level-cache = <&L2_300>;
+			L2_300: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x400>;
+			enable-method = "psci";
+			next-level-cache = <&L2_400>;
+			L2_400: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x500>;
+			enable-method = "psci";
+			next-level-cache = <&L2_500>;
+			L2_500: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x600>;
+			enable-method = "psci";
+			next-level-cache = <&L2_600>;
+			L2_600: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x700>;
+			enable-method = "psci";
+			next-level-cache = <&L2_700>;
+			L2_700: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm";
+			#reset-cells = <1>;
+		};
+	};
+
+	tcsr_mutex: hwlock {
+		compatible = "qcom,tcsr-mutex";
+		syscon = <&tcsr_mutex_regs 0 0x1000>;
+		#hwlock-cells = <1>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: memory@80000000 {
+			reg = <0x0 0x80000000 0x0 0x600000>;
+			no-map;
+		};
+
+		xbl_aop_mem: memory@80700000 {
+			reg = <0x0 0x80700000 0x0 0x160000>;
+			no-map;
+		};
+
+		cmd_db: memory@80860000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x80860000 0x0 0x20000>;
+			no-map;
+		};
+
+		smem_mem: memory@80900000 {
+			reg = <0x0 0x80900000 0x0 0x200000>;
+			no-map;
+		};
+
+		removed_mem: memory@80b00000 {
+			reg = <0x0 0x80b00000 0x0 0x5300000>;
+			no-map;
+		};
+
+		camera_mem: memory@86200000 {
+			reg = <0x0 0x86200000 0x0 0x500000>;
+			no-map;
+		};
+
+		wlan_mem: memory@86700000 {
+			reg = <0x0 0x86700000 0x0 0x100000>;
+			no-map;
+		};
+
+		ipa_fw_mem: memory@86800000 {
+			reg = <0x0 0x86800000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: memory@86810000 {
+			reg = <0x0 0x86810000 0x0 0xa000>;
+			no-map;
+		};
+
+		gpu_mem: memory@8681a000 {
+			reg = <0x0 0x8681a000 0x0 0x2000>;
+			no-map;
+		};
+
+		npu_mem: memory@86900000 {
+			reg = <0x0 0x86900000 0x0 0x500000>;
+			no-map;
+		};
+
+		video_mem: memory@86e00000 {
+			reg = <0x0 0x86e00000 0x0 0x500000>;
+			no-map;
+		};
+
+		cvp_mem: memory@87300000 {
+			reg = <0x0 0x87300000 0x0 0x500000>;
+			no-map;
+		};
+
+		cdsp_mem: memory@87800000 {
+			reg = <0x0 0x87800000 0x0 0x1400000>;
+			no-map;
+		};
+
+		slpi_mem: memory@88c00000 {
+			reg = <0x0 0x88c00000 0x0 0x1500000>;
+			no-map;
+		};
+
+		adsp_mem: memory@8a100000 {
+			reg = <0x0 0x8a100000 0x0 0x1d00000>;
+			no-map;
+		};
+
+		spss_mem: memory@8be00000 {
+			reg = <0x0 0x8be00000 0x0 0x100000>;
+			no-map;
+		};
+
+		cdsp_secure_heap: memory@8bf00000 {
+			reg = <0x0 0x8bf00000 0x0 0x4600000>;
+			no-map;
+		};
+	};
+
+	smem: qcom,smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_mem>;
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	soc: soc@0 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sm8250";
+			reg = <0x0 0x00100000 0x0 0x1f0000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clock-names = "bi_tcxo", "sleep_clk";
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
+		};
+
+		qupv3_id_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x00ac0000 0x0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc 133>, <&gcc 134>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			uart2: serial@a90000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0x0 0x00a90000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc 113>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x0 0x17a00000 0x0 0x10000>,     /* GICD */
+			      <0x0 0x17a60000 0x0 0x100000>;    /* GICR * 8 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sm8250-pdc";
+			reg = <0x0b220000 0x30000>, <0x17c000f0 0x60>;
+			qcom,pdc-ranges = <0 480 94>, <94 609 31>,
+					  <125 63 1>, <126 716 12>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		spmi: qcom,spmi@c440000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0 0x0c440000 0x0 0x0001100>,
+			      <0x0 0x0c600000 0x0 0x2000000>,
+			      <0x0 0x0e600000 0x0 0x0100000>,
+			      <0x0 0x0e700000 0x0 0x00a0000>,
+			      <0x0 0x0c40a000 0x0 0x0026000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		apps_rsc: rsc@18200000 {
+			label = "apps_rsc";
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x18200000 0x0 0x10000>,
+				<0x0 0x18210000 0x0 0x10000>,
+				<0x0 0x18220000 0x0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS  2>, <SLEEP_TCS   3>,
+					  <WAKE_TCS    3>, <CONTROL_TCS 1>;
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sm8250-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board>;
+			};
+		};
+
+		tcsr_mutex_regs: syscon@1f40000 {
+			compatible = "syscon";
+			reg = <0x0 0x01f40000 0x0 0x40000>;
+		};
+
+		timer@17c20000 {
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0 0x17c20000 0x0 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@17c21000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17c21000 0x0 0x1000>,
+				      <0x0 0x17c22000 0x0 0x1000>;
+			};
+
+			frame@17c23000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17c23000 0x0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c25000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17c25000 0x0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c27000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17c27000 0x0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c29000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17c29000 0x0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c2b000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17c2b000 0x0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c2d000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17c2d000 0x0 0x1000>;
+				status = "disabled";
+			};
+		};
+
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 12
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 2153842..a7ec7a7 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -1,14 +1,11 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m.dtb
 dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex.dtb
+dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex-idk-1110wr.dtb
 dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n.dtb
 dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-ex.dtb
 dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-cat874.dtb r8a774c0-ek874.dtb \
 			       r8a774c0-ek874-idk-2121wr.dtb
-dtb-$(CONFIG_ARCH_R8A7795) += r8a77950-salvator-x.dtb
-dtb-$(CONFIG_ARCH_R8A7795) += r8a77950-ulcb.dtb r8a77950-ulcb-kf.dtb
-dtb-$(CONFIG_ARCH_R8A7795) += r8a77951-salvator-x.dtb r8a77951-salvator-xs.dtb
-dtb-$(CONFIG_ARCH_R8A7795) += r8a77951-ulcb.dtb r8a77951-ulcb-kf.dtb
 dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-salvator-x.dtb
 dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-ulcb.dtb r8a77950-ulcb-kf.dtb
 dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-salvator-x.dtb r8a77951-salvator-xs.dtb
@@ -16,6 +13,7 @@
 dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-salvator-x.dtb r8a77960-salvator-xs.dtb
 dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-ulcb.dtb r8a77960-ulcb-kf.dtb
 dtb-$(CONFIG_ARCH_R8A77961) += r8a77961-salvator-xs.dtb
+dtb-$(CONFIG_ARCH_R8A77961) += r8a77961-ulcb.dtb
 dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-x.dtb r8a77965-salvator-xs.dtb
 dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-ulcb.dtb r8a77965-ulcb-kf.dtb
 dtb-$(CONFIG_ARCH_R8A77970) += r8a77970-eagle.dtb r8a77970-v3msk.dtb
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts
new file mode 100644
index 0000000..2ab5edd
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2M sub board connected to an
+ * Advantech IDK-1110WR 10.1" LVDS panel
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include "r8a774a1-hihope-rzg2m-ex.dts"
+#include "rzg2-advantech-idk-1110wr-panel.dtsi"
+
+/ {
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm0 0 50000>;
+
+		brightness-levels = <0 2 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+};
+
+&gpio1 {
+	/*
+	 * When GP1_20 is LOW LVDS0 is connected to the LVDS connector
+	 * When GP1_20 is HIGH LVDS0 is connected to the LT8918L
+	 */
+	lvds-connector-en-gpio {
+		gpio-hog;
+		gpios = <20 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "lvds-connector-en-gpio";
+	};
+};
+
+&lvds0 {
+	status = "okay";
+};
+
+&pfc {
+	pwm0_pins: pwm0 {
+		groups = "pwm0";
+		function = "pwm0";
+	};
+};
+
+&pwm0 {
+	pinctrl-0 = <&pwm0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
index 8f950da..7902343 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
@@ -2634,13 +2634,14 @@ du: display@feb00000 {
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 724>,
-				 <&cpg CPG_MOD 723>,
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
 				 <&cpg CPG_MOD 722>;
 			clock-names = "du.0", "du.1", "du.2";
+			resets = <&cpg 724>, <&cpg 722>;
+			reset-names = "du.0", "du.2";
 			status = "disabled";
 
-			vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>;
+			renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>;
 
 			ports {
 				#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
index c40ea30..3137f73 100644
--- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
@@ -2480,13 +2480,14 @@ du: display@feb00000 {
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 724>,
-				 <&cpg CPG_MOD 723>,
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
 				 <&cpg CPG_MOD 721>;
 			clock-names = "du.0", "du.1", "du.3";
+			resets = <&cpg 724>, <&cpg 722>;
+			reset-names = "du.0", "du.3";
 			status = "disabled";
 
-			vsps = <&vspd0 0>, <&vspd1 0>, <&vspd0 1>;
+			renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd0 1>;
 
 			ports {
 				#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index a53cd5f..22785cb 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -1810,10 +1810,12 @@ du: display@feb00000 {
 			reg = <0 0xfeb00000 0 0x40000>;
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 724>,
-				 <&cpg CPG_MOD 723>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
 			clock-names = "du.0", "du.1";
-			vsps = <&vspd0 0>, <&vspd1 0>;
+			resets = <&cpg 724>;
+			reset-names = "du.0";
+			renesas,vsps = <&vspd0 0>, <&vspd1 0>;
+
 			status = "disabled";
 
 			ports {
diff --git a/arch/arm64/boot/dts/renesas/r8a77950.dtsi b/arch/arm64/boot/dts/renesas/r8a77950.dtsi
index 1521649..3975eec 100644
--- a/arch/arm64/boot/dts/renesas/r8a77950.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77950.dtsi
@@ -30,7 +30,7 @@ &audma1 {
 };
 
 &du {
-	vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd3 0>;
+	renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd3 0>;
 };
 
 &fcpvb1 {
diff --git a/arch/arm64/boot/dts/renesas/r8a77951.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
index a8729eb7..5222954 100644
--- a/arch/arm64/boot/dts/renesas/r8a77951.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
@@ -3177,14 +3177,15 @@ du: display@feb00000 {
 				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 724>,
-				 <&cpg CPG_MOD 723>,
-				 <&cpg CPG_MOD 722>,
-				 <&cpg CPG_MOD 721>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
+				 <&cpg CPG_MOD 722>, <&cpg CPG_MOD 721>;
 			clock-names = "du.0", "du.1", "du.2", "du.3";
+			resets = <&cpg 724>, <&cpg 722>;
+			reset-names = "du.0", "du.2";
 
 			renesas,cmms = <&cmm0>, <&cmm1>, <&cmm2>, <&cmm3>;
-			vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd0 1>;
+			renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>,
+				       <&vspd0 1>;
 
 			status = "disabled";
 
diff --git a/arch/arm64/boot/dts/renesas/r8a77960.dtsi b/arch/arm64/boot/dts/renesas/r8a77960.dtsi
index 60f156c..3128236 100644
--- a/arch/arm64/boot/dts/renesas/r8a77960.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77960.dtsi
@@ -862,6 +862,15 @@ usb3_phy0: usb-phy@e65ee000 {
 			status = "disabled";
 		};
 
+		arm_cc630p: crypto@e6601000 {
+			compatible = "arm,cryptocell-630p-ree";
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xe6601000 0 0x1000>;
+			clocks = <&cpg CPG_MOD 229>;
+			resets = <&cpg 229>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+		};
+
 		dmac0: dma-controller@e6700000 {
 			compatible = "renesas,dmac-r8a7796",
 				     "renesas,rcar-dmac";
@@ -2818,13 +2827,14 @@ du: display@feb00000 {
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 724>,
-				 <&cpg CPG_MOD 723>,
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
 				 <&cpg CPG_MOD 722>;
 			clock-names = "du.0", "du.1", "du.2";
+			resets = <&cpg 724>, <&cpg 722>;
+			reset-names = "du.0", "du.2";
 
 			renesas,cmms = <&cmm0>, <&cmm1>, <&cmm2>;
-			vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>;
+			renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>;
 
 			status = "disabled";
 
diff --git a/arch/arm64/boot/dts/renesas/r8a77961-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77961-salvator-xs.dts
index 4abd78a..2ffc7e3 100644
--- a/arch/arm64/boot/dts/renesas/r8a77961-salvator-xs.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77961-salvator-xs.dts
@@ -19,7 +19,7 @@ memory@48000000 {
 		reg = <0x0 0x48000000 0x0 0x78000000>;
 	};
 
-	memory@400000000 {
+	memory@480000000 {
 		device_type = "memory";
 		reg = <0x4 0x80000000 0x0 0x80000000>;
 	};
diff --git a/arch/arm64/boot/dts/renesas/r8a77961-ulcb.dts b/arch/arm64/boot/dts/renesas/r8a77961-ulcb.dts
new file mode 100644
index 0000000..7c6e60f
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77961-ulcb.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the M3ULCB (R-Car Starter Kit Pro) board with R-Car
+ * M3-W+
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a77961.dtsi"
+#include "ulcb.dtsi"
+
+/ {
+	model = "Renesas M3ULCB board based on r8a77961";
+	compatible = "renesas,m3ulcb", "renesas,r8a77961";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@480000000 {
+		device_type = "memory";
+		reg = <0x4 0x80000000 0x0 0x80000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x1 0x00000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
index be3824b..0d96f2d 100644
--- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
@@ -474,6 +474,20 @@ sysc: system-controller@e6180000 {
 			#power-domain-cells = <1>;
 		};
 
+		tsc: thermal@e6198000 {
+			compatible = "renesas,r8a77961-thermal";
+			reg = <0 0xe6198000 0 0x100>,
+			      <0 0xe61a0000 0 0x100>,
+			      <0 0xe61a8000 0 0x100>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <1>;
+		};
+
 		intc_ex: interrupt-controller@e61c0000 {
 			#interrupt-cells = <2>;
 			interrupt-controller;
@@ -629,6 +643,15 @@ usb3_phy0: usb-phy@e65ee000 {
 			/* placeholder */
 		};
 
+		arm_cc630p: crypto@e6601000 {
+			compatible = "arm,cryptocell-630p-ree";
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xe6601000 0 0x1000>;
+			clocks = <&cpg CPG_MOD 229>;
+			resets = <&cpg 229>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+		};
+
 		dmac0: dma-controller@e6700000 {
 			compatible = "renesas,dmac-r8a77961",
 				     "renesas,rcar-dmac";
@@ -861,6 +884,7 @@ rcar_sound,src {
 			rcar_sound,ssi {
 				ssi0: ssi-0 { };
 				ssi1: ssi-1 { };
+				ssi2: ssi-2 { };
 			};
 		};
 
@@ -1064,6 +1088,71 @@ prr: chipid@fff00044 {
 		};
 	};
 
+	thermal-zones {
+		sensor_thermal1: sensor-thermal1 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 0>;
+			sustainable-power = <3874>;
+
+			trips {
+				sensor1_crit: sensor1-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor_thermal2: sensor-thermal2 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 1>;
+			sustainable-power = <3874>;
+
+			trips {
+				sensor2_crit: sensor2-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor_thermal3: sensor-thermal3 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 2>;
+			sustainable-power = <3874>;
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&a57_0 2 4>;
+					contribution = <1024>;
+				};
+				map1 {
+					trip = <&target>;
+					cooling-device = <&a53_0 0 2>;
+					contribution = <1024>;
+				};
+			};
+			trips {
+				target: trip-point1 {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				sensor3_crit: sensor3-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
index c17d90b..d82dd4e 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -111,6 +111,7 @@ a57_0: cpu@0 {
 			power-domains = <&sysc R8A77965_PD_CA57_CPU0>;
 			next-level-cache = <&L2_CA57>;
 			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
 			#cooling-cells = <2>;
 			dynamic-power-coefficient = <854>;
 			clocks = <&cpg CPG_CORE R8A77965_CLK_Z>;
@@ -124,6 +125,7 @@ a57_1: cpu@1 {
 			power-domains = <&sysc R8A77965_PD_CA57_CPU1>;
 			next-level-cache = <&L2_CA57>;
 			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
 			clocks = <&cpg CPG_CORE R8A77965_CLK_Z>;
 			operating-points-v2 = <&cluster0_opp>;
 		};
@@ -134,6 +136,19 @@ L2_CA57: cache-controller-0 {
 			cache-unified;
 			cache-level = <2>;
 		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <400>;
+				exit-latency-us = <500>;
+				min-residency-us = <4000>;
+			};
+		};
 	};
 
 	extal_clk: extal {
@@ -717,6 +732,15 @@ usb3_phy0: usb-phy@e65ee000 {
 			status = "disabled";
 		};
 
+		arm_cc630p: crypto@e6601000 {
+			compatible = "arm,cryptocell-630p-ree";
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xe6601000 0 0x1000>;
+			clocks = <&cpg CPG_MOD 229>;
+			resets = <&cpg 229>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+		};
+
 		dmac0: dma-controller@e6700000 {
 			compatible = "renesas,dmac-r8a77965",
 				     "renesas,rcar-dmac";
@@ -2494,13 +2518,14 @@ du: display@feb00000 {
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 724>,
-				 <&cpg CPG_MOD 723>,
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
 				 <&cpg CPG_MOD 721>;
 			clock-names = "du.0", "du.1", "du.3";
+			resets = <&cpg 724>, <&cpg 722>;
+			reset-names = "du.0", "du.3";
 
 			renesas,cmms = <&cmm0>, <&cmm1>, <&cmm3>;
-			vsps = <&vspd0 0>, <&vspd1 0>, <&vspd0 1>;
+			renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd0 1>;
 
 			status = "disabled";
 
diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
index 664a73a..a009c0e 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
@@ -1121,7 +1121,9 @@ du: display@feb00000 {
 			clock-names = "du.0";
 			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
 			resets = <&cpg 724>;
-			vsps = <&vspd0 0>;
+			reset-names = "du.0";
+			renesas,vsps = <&vspd0 0>;
+
 			status = "disabled";
 
 			ports {
diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
index b340fb4..e01b050 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -1484,15 +1484,16 @@ csi41vin7: endpoint@3 {
 		};
 
 		du: display@feb00000 {
-			compatible = "renesas,du-r8a77980",
-				     "renesas,du-r8a77970";
+			compatible = "renesas,du-r8a77980";
 			reg = <0 0xfeb00000 0 0x80000>;
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 724>;
 			clock-names = "du.0";
 			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
 			resets = <&cpg 724>;
-			vsps = <&vspd0 0>;
+			reset-names = "du.0";
+			renesas,vsps = <&vspd0 0>;
+
 			status = "disabled";
 
 			ports {
diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index 32d91f2..1543f18 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -88,6 +88,7 @@ a53_0: cpu@0 {
 			power-domains = <&sysc R8A77990_PD_CA53_CPU0>;
 			next-level-cache = <&L2_CA53>;
 			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
 			dynamic-power-coefficient = <277>;
 			clocks =<&cpg CPG_CORE R8A77990_CLK_Z2>;
 			operating-points-v2 = <&cluster1_opp>;
@@ -100,6 +101,7 @@ a53_1: cpu@1 {
 			power-domains = <&sysc R8A77990_PD_CA53_CPU1>;
 			next-level-cache = <&L2_CA53>;
 			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
 			clocks =<&cpg CPG_CORE R8A77990_CLK_Z2>;
 			operating-points-v2 = <&cluster1_opp>;
 		};
@@ -110,6 +112,19 @@ L2_CA53: cache-controller-0 {
 			cache-unified;
 			cache-level = <2>;
 		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <700>;
+				exit-latency-us = <700>;
+				min-residency-us = <5000>;
+			};
+		};
 	};
 
 	extal_clk: extal {
@@ -667,6 +682,15 @@ usb_dmac1: dma-controller@e65b0000 {
 			dma-channels = <2>;
 		};
 
+		arm_cc630p: crypto@e6601000 {
+			compatible = "arm,cryptocell-630p-ree";
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xe6601000 0 0x1000>;
+			clocks = <&cpg CPG_MOD 229>;
+			resets = <&cpg 229>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+		};
+
 		dmac0: dma-controller@e6700000 {
 			compatible = "renesas,dmac-r8a77990",
 				     "renesas,rcar-dmac";
@@ -1784,14 +1808,13 @@ du: display@feb00000 {
 			reg = <0 0xfeb00000 0 0x40000>;
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 724>,
-				 <&cpg CPG_MOD 723>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
 			clock-names = "du.0", "du.1";
 			resets = <&cpg 724>;
 			reset-names = "du.0";
 
 			renesas,cmms = <&cmm0>, <&cmm1>;
-			vsps = <&vspd0 0>, <&vspd1 0>;
+			renesas,vsps = <&vspd0 0>, <&vspd1 0>;
 
 			status = "disabled";
 
diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
index 9503007..e8d2290 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
@@ -389,6 +389,15 @@ usb_dmac1: dma-controller@e65b0000 {
 			dma-channels = <2>;
 		};
 
+		arm_cc630p: crypto@e6601000 {
+			compatible = "arm,cryptocell-630p-ree";
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xe6601000 0 0x1000>;
+			clocks = <&cpg CPG_MOD 229>;
+			resets = <&cpg 229>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+		};
+
 		canfd: can@e66c0000 {
 			compatible = "renesas,r8a77995-canfd",
 				     "renesas,rcar-gen3-canfd";
@@ -1017,14 +1026,13 @@ du: display@feb00000 {
 			reg = <0 0xfeb00000 0 0x40000>;
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 724>,
-				 <&cpg CPG_MOD 723>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
 			clock-names = "du.0", "du.1";
 			resets = <&cpg 724>;
 			reset-names = "du.0";
 
 			renesas,cmms = <&cmm0>, <&cmm1>;
-			vsps = <&vspd0 0>, <&vspd1 0>;
+			renesas,vsps = <&vspd0 0>, <&vspd1 0>;
 
 			status = "disabled";
 
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 60d9437..ae76213 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -28,6 +28,7 @@
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-orangepi.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-pinebook-pro.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezzanine.dtb
diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi
index 75908c5..f809dd6 100644
--- a/arch/arm64/boot/dts/rockchip/px30.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30.dtsi
@@ -413,27 +413,30 @@ io_domains: io-domains {
 
 		lvds: lvds {
 			compatible = "rockchip,px30-lvds";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			phys = <&dsi_dphy>;
 			phy-names = "dphy";
 			rockchip,grf = <&grf>;
 			rockchip,output = "lvds";
 			status = "disabled";
 
-			port@0 {
-				reg = <0>;
+			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				lvds_vopb_in: endpoint@0 {
+				port@0 {
 					reg = <0>;
-					remote-endpoint = <&vopb_out_lvds>;
-				};
+					#address-cells = <1>;
+					#size-cells = <0>;
 
-				lvds_vopl_in: endpoint@1 {
-					reg = <1>;
-					remote-endpoint = <&vopl_out_lvds>;
+					lvds_vopb_in: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vopb_out_lvds>;
+					};
+
+					lvds_vopl_in: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vopl_out_lvds>;
+					};
 				};
 			};
 		};
@@ -700,7 +703,7 @@ rktimer: timer@ff210000 {
 		clock-names = "pclk", "timer";
 	};
 
-	amba {
+	amba: bus {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -870,7 +873,6 @@ usb20_otg: usb@ff300000 {
 		g-np-tx-fifo-size = <16>;
 		g-rx-fifo-size = <280>;
 		g-tx-fifo-size = <256 128 128 64 32 16>;
-		g-use-dma;
 		phys = <&u2phy_otg>;
 		phy-names = "usb2-phy";
 		power-domains = <&power PX30_PD_USB>;
@@ -882,7 +884,6 @@ usb_host0_ehci: usb@ff340000 {
 		reg = <0x0 0xff340000 0x0 0x10000>;
 		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_HOST>;
-		clock-names = "usbhost";
 		phys = <&u2phy_host>;
 		phy-names = "usb";
 		power-domains = <&power PX30_PD_USB>;
@@ -894,7 +895,6 @@ usb_host0_ohci: usb@ff350000 {
 		reg = <0x0 0xff350000 0x0 0x10000>;
 		interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_HOST>;
-		clock-names = "usbhost";
 		phys = <&u2phy_host>;
 		phy-names = "usb";
 		power-domains = <&power PX30_PD_USB>;
@@ -1031,7 +1031,6 @@ vopb: vop@ff460000 {
 		reset-names = "axi", "ahb", "dclk";
 		iommus = <&vopb_mmu>;
 		power-domains = <&power PX30_PD_VO>;
-		rockchip,grf = <&grf>;
 		status = "disabled";
 
 		vopb_out: port {
@@ -1073,7 +1072,6 @@ vopl: vop@ff470000 {
 		reset-names = "axi", "ahb", "dclk";
 		iommus = <&vopl_mmu>;
 		power-domains = <&power PX30_PD_VO>;
-		rockchip,grf = <&grf>;
 		status = "disabled";
 
 		vopl_out: port {
diff --git a/arch/arm64/boot/dts/rockchip/rk3308.dtsi b/arch/arm64/boot/dts/rockchip/rk3308.dtsi
index 116f190..ac43bc3 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3308.dtsi
@@ -40,7 +40,7 @@ cpus {
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a35", "arm,armv8";
+			compatible = "arm,cortex-a35";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
 			clocks = <&cru ARMCLK>;
@@ -53,7 +53,7 @@ cpu0: cpu@0 {
 
 		cpu1: cpu@1 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a35", "arm,armv8";
+			compatible = "arm,cortex-a35";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
 			operating-points-v2 = <&cpu0_opp_table>;
@@ -63,7 +63,7 @@ cpu1: cpu@1 {
 
 		cpu2: cpu@2 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a35", "arm,armv8";
+			compatible = "arm,cortex-a35";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
 			operating-points-v2 = <&cpu0_opp_table>;
@@ -73,7 +73,7 @@ cpu2: cpu@2 {
 
 		cpu3: cpu@3 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a35", "arm,armv8";
+			compatible = "arm,cortex-a35";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
 			operating-points-v2 = <&cpu0_opp_table>;
@@ -513,7 +513,7 @@ saradc: saradc@ff1e0000 {
 		status = "disabled";
 	};
 
-	amba {
+	amba: bus {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
index 16f1656..797e90a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
@@ -60,6 +60,7 @@ &analog_sound {
 };
 
 &codec {
+	mute-gpios = <&grf_gpio 0 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
index 62936b4..bf3e546 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
@@ -104,6 +104,7 @@ dit_p0_0: endpoint {
 };
 
 &codec {
+	mute-gpios = <&grf_gpio 0 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
 	port@0 {
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 1f53ead..7e88d88 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -142,7 +142,7 @@ opp-1296000000 {
 		};
 	};
 
-	amba {
+	amba: bus {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -906,6 +906,7 @@ gmac2io: ethernet@ff540000 {
 		resets = <&cru SRST_GMAC2IO_A>;
 		reset-names = "stmmaceth";
 		rockchip,grf = <&grf>;
+		snps,txpbl = <0x4>;
 		status = "disabled";
 	};
 
@@ -927,6 +928,7 @@ gmac2phy: ethernet@ff550000 {
 		reset-names = "stmmaceth", "mac-phy";
 		phy-mode = "rmii";
 		phy-handle = <&phy>;
+		snps,txpbl = <0x4>;
 		status = "disabled";
 
 		mdio {
@@ -957,7 +959,6 @@ usb20_otg: usb@ff580000 {
 		g-np-tx-fifo-size = <16>;
 		g-rx-fifo-size = <280>;
 		g-tx-fifo-size = <256 128 128 64 32 16>;
-		g-use-dma;
 		phys = <&u2phy_otg>;
 		phy-names = "usb2-phy";
 		status = "disabled";
@@ -968,7 +969,6 @@ usb_host0_ehci: usb@ff5c0000 {
 		reg = <0x0 0xff5c0000 0x0 0x10000>;
 		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_HOST0>, <&u2phy>;
-		clock-names = "usbhost", "utmi";
 		phys = <&u2phy_host>;
 		phy-names = "usb";
 		status = "disabled";
@@ -979,7 +979,6 @@ usb_host0_ohci: usb@ff5d0000 {
 		reg = <0x0 0xff5d0000 0x0 0x10000>;
 		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_HOST0>, <&u2phy>;
-		clock-names = "usbhost", "utmi";
 		phys = <&u2phy_host>;
 		phy-names = "usb";
 		status = "disabled";
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
index 231db03..5ffd7b4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
@@ -239,7 +239,6 @@ &sdmmc {
 	cap-mmc-highspeed;
 	cap-sd-highspeed;
 	card-detect-delay = <200>;
-	no-emmc;
 	no-sdio;
 	sd-uhs-sdr12;
 	sd-uhs-sdr25;
diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
index a0df61c..1ebb0ee 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
@@ -136,7 +136,7 @@ cpu_b3: cpu@103 {
 		};
 	};
 
-	amba {
+	amba: bus {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -513,7 +513,6 @@ usb_host0_ehci: usb@ff500000 {
 		reg = <0x0 0xff500000 0x0 0x100>;
 		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_HOST0>;
-		clock-names = "usbhost";
 		status = "disabled";
 	};
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
index 77008dc..694b0d0 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
@@ -9,8 +9,7 @@
 
 / {
 	model = "Rockchip RK3399 Evaluation Board";
-	compatible = "rockchip,rk3399-evb", "rockchip,rk3399",
-		     "google,rk3399evb-rev2";
+	compatible = "rockchip,rk3399-evb", "rockchip,rk3399";
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
@@ -48,10 +47,22 @@ backlight: backlight {
 			240 241 242 243 244 245 246 247
 			248 249 250 251 252 253 254 255>;
 		default-brightness-level = <200>;
-		enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
 		pwms = <&pwm0 0 25000 0>;
 	};
 
+	edp_panel: edp-panel {
+		compatible ="lg,lp079qx1-sp0v";
+		backlight = <&backlight>;
+		enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
+		power-supply = <&vcc3v3_s0>;
+
+		port {
+			panel_in_edp: endpoint {
+				remote-endpoint = <&edp_out_panel>;
+			};
+		};
+	};
+
 	clkin_gmac: external-gmac-clock {
 		compatible = "fixed-clock";
 		clock-frequency = <125000000>;
@@ -114,6 +125,24 @@ vcc_phy: vcc-phy-regulator {
 
 };
 
+&edp {
+	status = "okay";
+	force-hpd;
+
+	ports {
+		edp_out: port@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			edp_out_panel: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&panel_in_edp>;
+			};
+		};
+	};
+};
+
 &emmc_phy {
 	status = "okay";
 };
@@ -134,6 +163,228 @@ &gmac {
 	status = "okay";
 };
 
+&i2c0 {
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		vcc10-supply = <&vcc3v3_sys>;
+		vcc11-supply = <&vcc3v3_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc1v8_pmu>;
+
+		regulators {
+			vdd_log: DCDC_REG1 {
+				regulator-name = "vdd_log";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG1 {
+				regulator-name = "vcc1v8_dvp";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v0_tp: LDO_REG2 {
+				regulator-name = "vcc3v0_tp";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_pmu: LDO_REG3 {
+				regulator-name = "vcc1v8_pmu";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sd: LDO_REG4 {
+				regulator-name = "vcc_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcca3v0_codec: LDO_REG5 {
+				regulator-name = "vcca3v0_codec";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcca1v8_codec: LDO_REG7 {
+				regulator-name = "vcca1v8_codec";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_s3: SWITCH_REG1 {
+				regulator-name = "vcc3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-name = "vcc3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
 &pwm0 {
 	status = "okay";
 };
@@ -210,11 +461,6 @@ pmic_int_l: pmic-int-l {
 			rockchip,pins =
 				<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
-
-		pmic_dvs2: pmic-dvs2 {
-			rockchip,pins =
-				<1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
-		};
 	};
 
 	usb2 {
@@ -224,3 +470,11 @@ vcc5v0_host_en: vcc5v0-host-en {
 		};
 	};
 };
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
index 7cd6d47..1384dab 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
@@ -291,11 +291,9 @@ cros_ec_pwm: ec-pwm {
 		#pwm-cells = <1>;
 	};
 
-	usbc_extcon1: extcon@1 {
+	usbc_extcon1: extcon1 {
 		compatible = "google,extcon-usbc-cros-ec";
 		google,usb-port-id = <1>;
-
-		#extcon-cells = <0>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
index dd56249..2f39977 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
@@ -570,11 +570,9 @@ i2c_tunnel: i2c-tunnel {
 			#size-cells = <0>;
 		};
 
-		usbc_extcon0: extcon@0 {
+		usbc_extcon0: extcon0 {
 			compatible = "google,extcon-usbc-cros-ec";
 			google,usb-port-id = <0>;
-
-			#extcon-cells = <0>;
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
index d69a613..aee484a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
@@ -29,6 +29,26 @@ dc_5v: dc-5v {
 		regulator-max-microvolt = <5000000>;
 	};
 
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_rx>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&power_led_gpio>;
+
+		led-0 {
+			label = "blue:power";
+			gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "default-on";
+		};
+	};
+
 	vcc_sys: vcc-sys {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_sys";
@@ -483,6 +503,18 @@ rgmii_sleep_pins: rgmii-sleep-pins {
 		};
 	};
 
+	ir {
+		ir_rx: ir-rx {
+			rockchip,pins = <0 RK_PA6 1 &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		power_led_gpio: power-led-gpio {
+			rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	pmic {
 		pmic_int_l: pmic-int-l {
 			rockchip,pins =
@@ -539,10 +571,6 @@ host_vbus_drv: host-vbus-drv {
 	};
 };
 
-&pwm0 {
-	status = "okay";
-};
-
 &pwm2 {
 	status = "okay";
 	pinctrl-0 = <&pwm2_pin_pull_down>;
@@ -555,7 +583,7 @@ &saradc {
 
 &sdmmc {
 	clock-frequency = <150000000>;
-	clock-freq-min-max = <200000 150000000>;
+	max-frequency = <150000000>;
 	bus-width = <4>;
 	cap-mmc-highspeed;
 	cap-sd-highspeed;
@@ -610,7 +638,6 @@ &spdif {
 
 &spi1 {
 	status = "okay";
-	max-freq = <10000000>;
 
 	flash@0 {
 		compatible = "jedec,spi-nor";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
index 9c659f3..f9f7246 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
@@ -202,14 +202,27 @@ &gmac {
 	clock_in_out = "input";
 	phy-supply = <&vcc3v3_s3>;
 	phy-mode = "rgmii";
+	phy-handle = <&rtl8211e>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii_pins>;
-	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 10000 50000>;
+	pinctrl-0 = <&rgmii_pins>, <&phy_intb>, <&phy_rstb>;
 	tx_delay = <0x28>;
 	rx_delay = <0x11>;
 	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtl8211e: phy@1 {
+			reg = <1>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <30000>;
+			reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+		};
+	};
 };
 
 &gpu {
@@ -419,6 +432,8 @@ vdd_cpu_b: regulator@40 {
 		compatible = "silergy,syr827";
 		reg = <0x40>;
 		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cpu_b_sleep>;
 		regulator-name = "vdd_cpu_b";
 		regulator-min-microvolt = <712500>;
 		regulator-max-microvolt = <1500000>;
@@ -436,6 +451,8 @@ vdd_gpu: regulator@41 {
 		compatible = "silergy,syr828";
 		reg = <0x41>;
 		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpu_sleep>;
 		regulator-name = "vdd_gpu";
 		regulator-min-microvolt = <712500>;
 		regulator-max-microvolt = <1500000>;
@@ -537,7 +554,25 @@ pwr_btn: pwr-btn {
 		};
 	};
 
+	phy {
+		phy_intb: phy-intb {
+			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_rstb: phy-rstb {
+			rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	pmic {
+		cpu_b_sleep: cpu-b-sleep {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		gpu_sleep: gpu-sleep {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
 		pmic_int_l: pmic-int-l {
 			rockchip,pins =
 				<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
new file mode 100644
index 0000000..5ea281b
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
@@ -0,0 +1,1096 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
+ * Copyright (c) 2020 Tobias Schramm <t.schramm@manjaro.org>
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/usb/pd.h>
+#include <dt-bindings/leds/common.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	model = "Pine64 Pinebook Pro";
+	compatible = "pine64,pinebook-pro", "rockchip,rk3399";
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	backlight: edp-backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc_12v>;
+		pwms = <&pwm0 0 740740 0>;
+	};
+
+	edp_panel: edp-panel {
+		compatible = "boe,nv140fhmn49";
+		backlight = <&backlight>;
+		enable-gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_en_gpio>;
+		power-supply = <&vcc3v3_panel>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				panel_in_edp: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&edp_out_panel>;
+				};
+			};
+		};
+	};
+
+	/*
+	 * Use separate nodes for gpio-keys to allow for selective deactivation
+	 * of wakeup sources via sysfs without disabling the whole key
+	 */
+	gpio-key-lid {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&lidbtn_gpio>;
+
+		lid {
+			debounce-interval = <20>;
+			gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_LOW>;
+			label = "Lid";
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	gpio-key-power {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwrbtn_gpio>;
+
+		power {
+			debounce-interval = <20>;
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "Power";
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwrled_gpio &slpled_gpio>;
+
+		green-led {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "on";
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+			label = "green:power";
+		};
+
+		red-led {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_STANDBY;
+			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+			label = "red:standby";
+			panic-indicator;
+			retain-state-suspended;
+		};
+	};
+
+	/* Power sequence for SDIO WiFi module */
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h_gpio>;
+		post-power-on-delay-ms = <100>;
+		power-off-delay-us = <500000>;
+
+		/* WL_REG_ON on module */
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
+
+	/* Audio components */
+	es8316-sound {
+		compatible = "simple-audio-card";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_det_gpio>;
+		simple-audio-card,name = "rockchip,es8316-codec";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones",
+			"Speaker", "Speaker";
+		simple-audio-card,routing =
+			"MIC1", "Mic Jack",
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Speaker Amplifier INL", "HPOL",
+			"Speaker Amplifier INR", "HPOR",
+			"Speaker", "Speaker Amplifier OUTL",
+			"Speaker", "Speaker Amplifier OUTR";
+
+		simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_LOW>;
+		simple-audio-card,aux-devs = <&speaker_amp>;
+		simple-audio-card,pin-switches = "Speaker";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&es8316>;
+		};
+	};
+
+	speaker_amp: speaker-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
+		sound-name-prefix = "Speaker Amplifier";
+		VCC-supply = <&pa_5v>;
+	};
+
+	/* Power tree */
+	/* Root power source */
+	vcc_sysin: vcc-sysin {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sysin";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* Regulators supplied by vcc_sysin */
+	/* LCD backlight supply */
+	vcc_12v: vcc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		vin-supply = <&vcc_sysin>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	/* Main 3.3 V supply */
+	vcc3v3_sys: wifi_bat: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_sysin>;
+
+		regulator-state-mem {
+			regulator-on-in-suspend;
+		};
+	};
+
+	/* 5 V USB power supply */
+	vcc5v0_usb: pa_5v: vcc5v0-usb-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_5v_gpio>;
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_sysin>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	/* RK3399 logic supply */
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		regulator-name = "vdd_log";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1400000>;
+		vin-supply = <&vcc_sysin>;
+
+		regulator-state-mem {
+			regulator-on-in-suspend;
+		};
+	};
+
+	/* Regulators supplied by vcc3v3_sys */
+	/* 0.9 V supply, always on */
+	vcc_0v9: vcc-0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	/* S3 1.8 V supply, switched by vcc1v8_s3 */
+	vcca1v8_s3: vcc1v8-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcca1v8_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	/* micro SD card power */
+	vcc3v0_sd: vcc3v0-sd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc0_pwr_h_gpio>;
+		regulator-name = "vcc3v0_sd";
+		regulator-always-on;
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	/* LCD panel power, called VCC3V3_S0 in schematic */
+	vcc3v3_panel: vcc3v3-panel {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcdvcc_en_gpio>;
+		regulator-name = "vcc3v3_panel";
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-enable-ramp-delay = <100000>;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	/* M.2 adapter power, switched by vcc1v8_s3 */
+	vcc3v3_ssd: vcc3v3-ssd {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_ssd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	/* Regulators supplied by vcc5v0_usb */
+	/* USB 3 port power supply regulator  */
+	vcc5v0_otg: vcc5v0-otg {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en_gpio>;
+		regulator-name = "vcc5v0_otg";
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	/* Regulators supplied by vcc5v0_usb */
+	/* Type C port power supply regulator */
+	vbus_5vout: vbus_typec: vbus-5vout {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_typec0_en_gpio>;
+		regulator-name = "vbus_5vout";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	/* Regulators supplied by vcc_1v8 */
+	/* Primary 0.9 V LDO */
+	vcca0v9_s3: vcca0v9-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc0v9_s3";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_1v8>;
+
+		regulator-state-mem {
+			regulator-on-in-suspend;
+		};
+	};
+
+	mains_charger: dc-charger {
+		compatible = "gpio-charger";
+		charger-type = "mains";
+		gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_LOW>;
+
+		/* Also triggered by USB charger */
+		pinctrl-names = "default";
+		pinctrl-0 = <&dc_det_gpio>;
+	};
+};
+
+&cdn_dp {
+	status = "okay";
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&edp {
+	force-hpd;
+	pinctrl-names = "default";
+	pinctrl-0 = <&edp_hpd>;
+	status = "okay";
+
+	ports {
+		edp_out: port@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			edp_out_panel: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&panel_in_edp>;
+			};
+		};
+	};
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <4>;
+	i2c-scl-rising-time-ns = <168>;
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		interrupt-parent = <&gpio3>;
+		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l_gpio>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sysin>;
+		vcc2-supply = <&vcc_sysin>;
+		vcc3-supply = <&vcc_sysin>;
+		vcc4-supply = <&vcc_sysin>;
+		vcc6-supply = <&vcc_sysin>;
+		vcc7-supply = <&vcc_sysin>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc_sysin>;
+		vcc10-supply = <&vcc_sysin>;
+		vcc11-supply = <&vcc_sysin>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vcc13-supply = <&vcc_sysin>;
+		vcc14-supply = <&vcc_sysin>;
+
+		regulators {
+			/* rk3399 center logic supply */
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: vcc_wl: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			/* not used */
+			LDO_REG1 {
+			};
+
+			/* not used */
+			LDO_REG2 {
+			};
+
+			vcc1v8_pmupll: LDO_REG3 {
+				regulator-name = "vcc1v8_pmupll";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sdio: LDO_REG4 {
+				regulator-name = "vcc_sdio";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcca3v0_codec: LDO_REG5 {
+				regulator-name = "vcca3v0_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcca1v8_codec: LDO_REG7 {
+				regulator-name = "vcca1v8_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_s3: SWITCH_REG1 {
+				regulator-name = "vcc3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-name = "vcc3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel1_gpio>;
+		regulator-name = "vdd_cpu_b";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		vin-supply = <&vcc_1v8>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel2_gpio>;
+		regulator-name = "vdd_gpu";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		vin-supply = <&vcc_1v8>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	i2c-scl-falling-time-ns = <4>;
+	i2c-scl-rising-time-ns = <168>;
+	status = "okay";
+
+	es8316: es8316@11 {
+		compatible = "everest,es8316";
+		reg = <0x11>;
+		clocks = <&cru SCLK_I2S_8CH_OUT>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2c3 {
+	i2c-scl-falling-time-ns = <15>;
+	i2c-scl-rising-time-ns = <450>;
+	status = "okay";
+};
+
+&i2c4 {
+	i2c-scl-falling-time-ns = <20>;
+	i2c-scl-rising-time-ns = <600>;
+	status = "okay";
+
+	fusb0: fusb30x@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		fcs,int_n = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&fusb0_int_gpio>;
+		vbus-supply = <&vbus_typec>;
+
+		connector {
+			compatible = "usb-c-connector";
+			data-role = "host";
+			label = "USB-C";
+			op-sink-microwatt = <1000000>;
+			power-role = "dual";
+			sink-pdos =
+				<PDO_FIXED(5000, 2500, PDO_FIXED_USB_COMM)>;
+			source-pdos =
+				<PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>;
+			try-power-role = "sink";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usbc_hs: endpoint {
+						remote-endpoint =
+							<&u2phy0_typec_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usbc_ss: endpoint {
+						remote-endpoint =
+							<&tcphy0_typec_ss>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usbc_dp: endpoint {
+						remote-endpoint =
+							<&tcphy0_typec_dp>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2s1 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s_8ch_mclk_gpio>, <&i2s1_2ch_bus>;
+	rockchip,capture-channels = <8>;
+	rockchip,playback-channels = <8>;
+	status = "okay";
+};
+
+&io_domains {
+	audio-supply = <&vcc_3v0>;
+	gpio1830-supply = <&vcc_3v0>;
+	sdmmc-supply = <&vcc_sdio>;
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	bus-scan-delay-ms = <1000>;
+	ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
+	max-link-speed = <2>;
+	num-lanes = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_clkreqn_cpm>;
+	vpcie0v9-supply = <&vcca0v9_s3>;
+	vpcie1v8-supply = <&vcca1v8_s3>;
+	vpcie3v3-supply = <&vcc3v3_ssd>;
+	status = "okay";
+};
+
+&pinctrl {
+	buttons {
+		pwrbtn_gpio: pwrbtn-gpio {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		lidbtn_gpio: lidbtn-gpio {
+			rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	dc-charger {
+		dc_det_gpio: dc-det-gpio {
+			rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	es8316 {
+		hp_det_gpio: hp-det-gpio {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	fusb302x {
+		fusb0_int_gpio: fusb0-int-gpio {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	i2s1 {
+		i2s_8ch_mclk_gpio: i2s-8ch-mclk-gpio {
+			rockchip,pins = <4 RK_PA0 1 &pcfg_pull_none>;
+		};
+	};
+
+	lcd-panel {
+		lcdvcc_en_gpio: lcdvcc-en-gpio {
+			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		panel_en_gpio: panel-en-gpio {
+			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		lcd_panel_reset_gpio: lcd-panel-reset-gpio {
+			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		pwrled_gpio: pwrled_gpio {
+			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		slpled_gpio: slpled_gpio {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l_gpio: pmic-int-l-gpio {
+			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vsel1_gpio: vsel1-gpio {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		vsel2_gpio: vsel2-gpio {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	sdcard {
+		sdmmc0_pwr_h_gpio: sdmmc0-pwr-h-gpio {
+			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h_gpio: wifi-enable-h-gpio {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb-typec {
+		vcc5v0_typec0_en_gpio: vcc5v0-typec0-en-gpio {
+			rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb2 {
+		pwr_5v_gpio: pwr-5v-gpio {
+			rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_host_en_gpio: vcc5v0-host-en-gpio {
+			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wireless-bluetooth {
+		bt_wake_gpio: bt-wake-gpio {
+			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_gpio: bt-host-wake-gpio {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_reset_gpio: bt-reset-gpio {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmu1830-supply = <&vcc_3v0>;
+	status = "okay";
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca1v8_s3>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v0_sd>;
+	vqmmc-supply = <&vcc_sdio>;
+	status = "okay";
+};
+
+&sdio0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	status = "okay";
+};
+
+&spi1 {
+	max-freq = <10000000>;
+	status = "okay";
+
+	spiflash: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		m25p,fast-read;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy0_dp {
+	port {
+		tcphy0_typec_dp: endpoint {
+			remote-endpoint = <&usbc_dp>;
+		};
+	};
+};
+
+&tcphy0_usb3 {
+	port {
+		tcphy0_typec_ss: endpoint {
+			remote-endpoint = <&usbc_ss>;
+		};
+	};
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc5v0_otg>;
+		status = "okay";
+	};
+
+	port {
+		u2phy0_typec_hs: endpoint {
+			remote-endpoint = <&usbc_hs>;
+		};
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_otg>;
+		status = "okay";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		clocks = <&rk808 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		max-speed = <1500000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_gpio &bt_wake_gpio &bt_reset_gpio>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		vbat-supply = <&wifi_bat>;
+		vddio-supply = <&vcc_wl>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
index c1edca3..07694b1 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
@@ -480,7 +480,7 @@ &sdhci {
 };
 
 &sdmmc {
-	vqmmc = <&vcc_sd>;
+	vqmmc-supply = <&vcc_sd>;
 };
 
 &spi1 {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
index b69f0f2..ba7c75c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
@@ -542,7 +542,7 @@ &sdmmc {
 	cap-mmc-highspeed;
 	cap-sd-highspeed;
 	clock-frequency = <100000000>;
-	clock-freq-min-max = <100000 100000000>;
+	max-frequency = <100000000>;
 	cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
 	disable-wp;
 	sd-uhs-sdr104;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
index b4d8f60..73e269a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
@@ -230,7 +230,5 @@ &sdio0 {
 };
 
 &spdif {
-	i2c-scl-rising-time-ns = <450>;
-	i2c-scl-falling-time-ns = <15>;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 33cc21f..74f2c3d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -197,7 +197,7 @@ xin24m: xin24m {
 		#clock-cells = <0>;
 	};
 
-	amba {
+	amba: bus {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -288,6 +288,7 @@ gmac: ethernet@fe300000 {
 		resets = <&cru SRST_A_GMAC>;
 		reset-names = "stmmaceth";
 		rockchip,grf = <&grf>;
+		snps,txpbl = <0x4>;
 		status = "disabled";
 	};
 
@@ -349,8 +350,6 @@ usb_host0_ehci: usb@fe380000 {
 		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>,
 			 <&u2phy0>;
-		clock-names = "usbhost", "arbiter",
-			      "utmi";
 		phys = <&u2phy0_host>;
 		phy-names = "usb";
 		status = "disabled";
@@ -362,8 +361,6 @@ usb_host0_ohci: usb@fe3a0000 {
 		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>,
 			 <&u2phy0>;
-		clock-names = "usbhost", "arbiter",
-			      "utmi";
 		phys = <&u2phy0_host>;
 		phy-names = "usb";
 		status = "disabled";
@@ -375,8 +372,6 @@ usb_host1_ehci: usb@fe3c0000 {
 		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>,
 			 <&u2phy1>;
-		clock-names = "usbhost", "arbiter",
-			      "utmi";
 		phys = <&u2phy1_host>;
 		phy-names = "usb";
 		status = "disabled";
@@ -388,8 +383,6 @@ usb_host1_ohci: usb@fe3e0000 {
 		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>,
 			 <&u2phy1>;
-		clock-names = "usbhost", "arbiter",
-			      "utmi";
 		phys = <&u2phy1_host>;
 		phy-names = "usb";
 		status = "disabled";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts b/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts
index b42f941..a1783e7 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts
@@ -13,5 +13,6 @@
 
 / {
 	model = "Radxa ROCK Pi N10";
-	compatible = "radxa,rockpi-n10", "rockchip,rk3399pro";
+	compatible = "radxa,rockpi-n10", "vamrs,rk3399pro-vmarc-som",
+		     "rockchip,rk3399pro";
 };
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
index 5b18bda..2ca2d3d 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
@@ -143,8 +143,8 @@ spi1: spi@54006100 {
 			interrupts = <0 216 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_spi1>;
-			clocks = <&peri_clk 11>;
-			resets = <&peri_rst 11>;
+			clocks = <&peri_clk 12>;
+			resets = <&peri_rst 12>;
 		};
 
 		serial0: serial@54006800 {
@@ -433,7 +433,7 @@ peri_rst: reset {
 			};
 		};
 
-		emmc: sdhc@5a000000 {
+		emmc: mmc@5a000000 {
 			compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc";
 			reg = <0x5a000000 0x400>;
 			interrupts = <0 78 4>;
@@ -566,7 +566,7 @@ efuse@200 {
 			};
 		};
 
-		aidet: aidet@5fc20000 {
+		aidet: interrupt-controller@5fc20000 {
 			compatible = "socionext,uniphier-ld11-aidet";
 			reg = <0x5fc20000 0x200>;
 			interrupt-controller;
@@ -621,7 +621,7 @@ mdio: mdio {
 			};
 		};
 
-		nand: nand@68000000 {
+		nand: nand-controller@68000000 {
 			compatible = "socionext,uniphier-denali-nand-v5b";
 			status = "disabled";
 			reg-names = "nand_data", "denali_reg";
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
index f2dc5f6..a93148c 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
@@ -248,8 +248,8 @@ spi1: spi@54006100 {
 			interrupts = <0 216 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_spi1>;
-			clocks = <&peri_clk 11>;
-			resets = <&peri_rst 11>;
+			clocks = <&peri_clk 12>;
+			resets = <&peri_rst 12>;
 		};
 
 		spi2: spi@54006200 {
@@ -259,8 +259,8 @@ spi2: spi@54006200 {
 			interrupts = <0 229 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_spi2>;
-			clocks = <&peri_clk 11>;
-			resets = <&peri_rst 11>;
+			clocks = <&peri_clk 13>;
+			resets = <&peri_rst 13>;
 		};
 
 		spi3: spi@54006300 {
@@ -270,8 +270,8 @@ spi3: spi@54006300 {
 			interrupts = <0 230 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_spi3>;
-			clocks = <&peri_clk 11>;
-			resets = <&peri_rst 11>;
+			clocks = <&peri_clk 14>;
+			resets = <&peri_rst 14>;
 		};
 
 		serial0: serial@54006800 {
@@ -559,7 +559,7 @@ peri_rst: reset {
 			};
 		};
 
-		emmc: sdhc@5a000000 {
+		emmc: mmc@5a000000 {
 			compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc";
 			reg = <0x5a000000 0x400>;
 			interrupts = <0 78 4>;
@@ -578,7 +578,7 @@ emmc: sdhc@5a000000 {
 			cdns,phy-dll-delay-sdclk-hsmmc = <21>;
 		};
 
-		sd: sdhc@5a400000 {
+		sd: mmc@5a400000 {
 			compatible = "socionext,uniphier-sd-v3.1.1";
 			status = "disabled";
 			reg = <0x5a400000 0x800>;
@@ -664,7 +664,7 @@ usb_hs_i2: trim@5a,0 {
 			};
 		};
 
-		aidet: aidet@5fc20000 {
+		aidet: interrupt-controller@5fc20000 {
 			compatible = "socionext,uniphier-ld20-aidet";
 			reg = <0x5fc20000 0x200>;
 			interrupt-controller;
@@ -925,7 +925,7 @@ pcie_phy: phy@66038000 {
 			socionext,syscon = <&soc_glue>;
 		};
 
-		nand: nand@68000000 {
+		nand: nand-controller@68000000 {
 			compatible = "socionext,uniphier-denali-nand-v5b";
 			status = "disabled";
 			reg-names = "nand_data", "denali_reg";
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts
index 754315b..4d00ff9 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts
@@ -27,6 +27,8 @@ aliases {
 		i2c2 = &i2c2;
 		i2c3 = &i2c3;
 		i2c6 = &i2c6;
+		spi0 = &spi0;
+		spi1 = &spi1;
 	};
 
 	memory@80000000 {
@@ -39,6 +41,14 @@ &ethsc {
 	interrupts = <4 8>;
 };
 
+&spi0 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+};
+
 &serial0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
index 73e7e12..616835b 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
@@ -7,6 +7,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/gpio/uniphier-gpio.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	compatible = "socionext,uniphier-pxs3";
@@ -42,6 +43,7 @@ cpu0: cpu@0 {
 			clocks = <&sys_clk 33>;
 			enable-method = "psci";
 			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
@@ -51,6 +53,7 @@ cpu1: cpu@1 {
 			clocks = <&sys_clk 33>;
 			enable-method = "psci";
 			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@2 {
@@ -60,6 +63,7 @@ cpu2: cpu@2 {
 			clocks = <&sys_clk 33>;
 			enable-method = "psci";
 			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@3 {
@@ -69,6 +73,7 @@ cpu3: cpu@3 {
 			clocks = <&sys_clk 33>;
 			enable-method = "psci";
 			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
 		};
 	};
 
@@ -136,6 +141,37 @@ timer {
 			     <1 10 4>;
 	};
 
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;	/* 250ms */
+			polling-delay = <1000>;		/* 1000ms */
+			thermal-sensors = <&pvtctl>;
+
+			trips {
+				cpu_crit: cpu-crit {
+					temperature = <110000>;	/* 110C */
+					hysteresis = <2000>;
+					type = "critical";
+				};
+				cpu_alert: cpu-alert {
+					temperature = <100000>;	/* 100C */
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -171,8 +207,8 @@ spi1: spi@54006100 {
 			interrupts = <0 216 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_spi1>;
-			clocks = <&peri_clk 11>;
-			resets = <&peri_rst 11>;
+			clocks = <&peri_clk 12>;
+			resets = <&peri_rst 12>;
 		};
 
 		serial0: serial@54006800 {
@@ -353,7 +389,7 @@ peri_rst: reset {
 			};
 		};
 
-		emmc: sdhc@5a000000 {
+		emmc: mmc@5a000000 {
 			compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc";
 			reg = <0x5a000000 0x400>;
 			interrupts = <0 78 4>;
@@ -372,7 +408,7 @@ emmc: sdhc@5a000000 {
 			cdns,phy-dll-delay-sdclk-hsmmc = <21>;
 		};
 
-		sd: sdhc@5a400000 {
+		sd: mmc@5a400000 {
 			compatible = "socionext,uniphier-sd-v3.1.1";
 			status = "disabled";
 			reg = <0x5a400000 0x800>;
@@ -462,7 +498,7 @@ usb_hs_i2: trim@5a,0 {
 			};
 		};
 
-		aidet: aidet@5fc20000 {
+		aidet: interrupt-controller@5fc20000 {
 			compatible = "socionext,uniphier-pxs3-aidet";
 			reg = <0x5fc20000 0x200>;
 			interrupt-controller;
@@ -496,6 +532,13 @@ sys_rst: reset {
 			watchdog {
 				compatible = "socionext,uniphier-wdt";
 			};
+
+			pvtctl: pvtctl {
+				compatible = "socionext,uniphier-pxs3-thermal";
+				interrupts = <0 3 4>;
+				#thermal-sensor-cells = <0>;
+				socionext,tmod-calibration = <0x0f22 0x68ee>;
+			};
 		};
 
 		eth0: ethernet@65000000 {
@@ -783,7 +826,7 @@ pcie_phy: phy@66038000 {
 			socionext,syscon = <&soc_glue>;
 		};
 
-		nand: nand@68000000 {
+		nand: nand-controller@68000000 {
 			compatible = "socionext,uniphier-denali-nand-v5b";
 			status = "disabled";
 			reg-names = "nand_data", "denali_reg";
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index e5df20a..11887c7 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -189,6 +189,8 @@ main_spi0: spi@2100000 {
 		power-domains = <&k3_pds 137 TI_SCI_PD_EXCLUSIVE>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		dmas = <&main_udmap 0xc500>, <&main_udmap 0x4500>;
+		dma-names = "tx0", "rx0";
 	};
 
 	main_spi1: spi@2110000 {
@@ -296,6 +298,7 @@ dwc3_0: dwc3@4000000 {
 		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		dma-coherent;
 		power-domains = <&k3_pds 151 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 151 2>, <&k3_clks 151 7>;
 		assigned-clocks = <&k3_clks 151 2>, <&k3_clks 151 7>;
 		assigned-clock-parents = <&k3_clks 151 4>,	/* set REF_CLK to 20MHz i.e. PER0_PLL/48 */
 					 <&k3_clks 151 9>;	/* set PIPE3_TXB_CLK to CLK_12M_RC/256 (for HS only) */
@@ -335,6 +338,7 @@ dwc3_1: dwc3@4020000 {
 		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
 		dma-coherent;
 		power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 152 2>;
 		assigned-clocks = <&k3_clks 152 2>;
 		assigned-clock-parents = <&k3_clks 152 4>;	/* set REF_CLK to 20MHz i.e. PER0_PLL/48 */
 
diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
index cbf97b6..353d1e2 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
@@ -12,6 +12,12 @@ mcu_conf: scm_conf@40f00000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0x40f00000 0x20000>;
+
+		phy_gmii_sel: phy@4040 {
+			compatible = "ti,am654-phy-gmii-sel";
+			reg = <0x4040 0x4>;
+			#phy-cells = <1>;
+		};
 	};
 
 	mcu_uart0: serial@40a00000 {
@@ -82,6 +88,9 @@ tscadc0: tscadc@40200000 {
 		assigned-clocks = <&k3_clks 0 2>;
 		assigned-clock-rates = <60000000>;
 		clock-names = "adc_tsc_fck";
+		dmas = <&mcu_udmap 0x7100>,
+			<&mcu_udmap 0x7101 >;
+		dma-names = "fifo0", "fifo1";
 
 		adc {
 			#io-channel-cells = <1>;
@@ -97,6 +106,9 @@ tscadc1: tscadc@40210000 {
 		assigned-clocks = <&k3_clks 1 2>;
 		assigned-clock-rates = <60000000>;
 		clock-names = "adc_tsc_fck";
+		dmas = <&mcu_udmap 0x7102>,
+			<&mcu_udmap 0x7103>;
+		dma-names = "fifo0", "fifo1";
 
 		adc {
 			#io-channel-cells = <1>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
index bfe91f2..3d60641 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
@@ -34,6 +34,20 @@ k3_reset: reset-controller {
 		};
 	};
 
+	mcu_conf: syscon@40f00000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x0 0x40f00000 0x0 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x40f00000 0x20000>;
+
+		phy_gmii_sel: phy@4040 {
+			compatible = "ti,am654-phy-gmii-sel";
+			reg = <0x4040 0x4>;
+			#phy-cells = <1>;
+		};
+	};
+
 	wkup_pmx0: pinmux@4301c000 {
 		compatible = "pinctrl-single";
 		/* Proxy 0 addressing */
@@ -203,6 +217,9 @@ tscadc0: tscadc@40200000 {
 		assigned-clocks = <&k3_clks 0 3>;
 		assigned-clock-rates = <60000000>;
 		clock-names = "adc_tsc_fck";
+		dmas = <&main_udmap 0x7400>,
+			<&main_udmap 0x7401>;
+		dma-names = "fifo0", "fifo1";
 
 		adc {
 			#io-channel-cells = <1>;
@@ -219,6 +236,9 @@ tscadc1: tscadc@40210000 {
 		assigned-clocks = <&k3_clks 1 3>;
 		assigned-clock-rates = <60000000>;
 		clock-names = "adc_tsc_fck";
+		dmas = <&main_udmap 0x7402>,
+			<&main_udmap 0x7403>;
+		dma-names = "fifo0", "fifo1";
 
 		adc {
 			#io-channel-cells = <1>;
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index a6c0d02..24e534d 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -91,6 +91,7 @@
 CONFIG_ARM_QCOM_CPUFREQ_HW=y
 CONFIG_ARM_RASPBERRYPI_CPUFREQ=m
 CONFIG_ARM_TEGRA186_CPUFREQ=y
+CONFIG_QORIQ_CPUFREQ=y
 CONFIG_ARM_SCPI_PROTOCOL=y
 CONFIG_RASPBERRYPI_FIRMWARE=y
 CONFIG_INTEL_STRATIX10_SERVICE=y
@@ -155,6 +156,7 @@
 CONFIG_IP6_NF_TARGET_MASQUERADE=m
 CONFIG_BRIDGE=m
 CONFIG_BRIDGE_VLAN_FILTERING=y
+CONFIG_NET_DSA=m
 CONFIG_VLAN_8021Q=m
 CONFIG_VLAN_8021Q_GVRP=y
 CONFIG_VLAN_8021Q_MVRP=y
@@ -162,6 +164,10 @@
 CONFIG_QRTR_SMD=m
 CONFIG_QRTR_TUN=m
 CONFIG_BPF_JIT=y
+CONFIG_CAN=m
+CONFIG_CAN_RCAR=m
+CONFIG_CAN_RCAR_CANFD=m
+CONFIG_CAN_FLEXCAN=m
 CONFIG_BT=m
 CONFIG_BT_HIDP=m
 # CONFIG_BT_HS is not set
@@ -196,6 +202,7 @@
 CONFIG_PCIE_ROCKCHIP_HOST=m
 CONFIG_PCIE_BRCMSTB=m
 CONFIG_PCI_LAYERSCAPE=y
+CONFIG_PCIE_LAYERSCAPE_GEN4=y
 CONFIG_PCI_HISI=y
 CONFIG_PCIE_QCOM=y
 CONFIG_PCIE_ARMADA_8K=y
@@ -208,11 +215,22 @@
 CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
 CONFIG_HISILICON_LPC=y
 CONFIG_SIMPLE_PM_BUS=y
+CONFIG_FSL_MC_BUS=y
 CONFIG_MTD=y
 CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_SST25L=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_DENALI_DT=y
 CONFIG_MTD_NAND_MARVELL=y
+CONFIG_MTD_NAND_FSL_IFC=y
 CONFIG_MTD_NAND_QCOM=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_SPI_CADENCE_QUADSPI=y
@@ -221,12 +239,14 @@
 CONFIG_VIRTIO_BLK=y
 CONFIG_BLK_DEV_NVME=m
 CONFIG_SRAM=y
+CONFIG_EEPROM_AT24=m
 CONFIG_EEPROM_AT25=m
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_SAS_ATA=y
 CONFIG_SCSI_HISI_SAS=y
 CONFIG_SCSI_HISI_SAS_PCI=y
+CONFIG_MEGARAID_SAS=y
 CONFIG_SCSI_MPT3SAS=m
 CONFIG_SCSI_UFSHCD=y
 CONFIG_SCSI_UFSHCD_PLATFORM=y
@@ -254,6 +274,7 @@
 CONFIG_TUN=y
 CONFIG_VETH=m
 CONFIG_VIRTIO_NET=y
+CONFIG_NET_DSA_MSCC_FELIX=m
 CONFIG_AMD_XGBE=y
 CONFIG_NET_XGENE=y
 CONFIG_ATL1C=m
@@ -262,12 +283,18 @@
 CONFIG_MACB=y
 CONFIG_THUNDER_NIC_PF=y
 CONFIG_FEC=y
+CONFIG_FSL_FMAN=y
+CONFIG_FSL_DPAA_ETH=y
+CONFIG_FSL_DPAA2_ETH=y
+CONFIG_FSL_ENETC=y
+CONFIG_FSL_ENETC_VF=y
 CONFIG_HIX5HD2_GMAC=y
 CONFIG_HNS_DSAF=y
 CONFIG_HNS_ENET=y
 CONFIG_HNS3=y
 CONFIG_HNS3_HCLGE=y
 CONFIG_HNS3_ENET=y
+CONFIG_E1000=y
 CONFIG_E1000E=y
 CONFIG_IGB=y
 CONFIG_IGBVF=y
@@ -286,13 +313,17 @@
 CONFIG_STMMAC_ETH=m
 CONFIG_TI_K3_AM65_CPSW_NUSS=y
 CONFIG_MDIO_BUS_MUX_MMIOREG=y
+CONFIG_MDIO_BUS_MUX_MULTIPLEXER=y
+CONFIG_AQUANTIA_PHY=y
 CONFIG_MARVELL_PHY=m
 CONFIG_MARVELL_10G_PHY=m
 CONFIG_MESON_GXL_PHY=m
 CONFIG_MICREL_PHY=y
+CONFIG_MICROSEMI_PHY=y
 CONFIG_AT803X_PHY=y
 CONFIG_REALTEK_PHY=m
 CONFIG_ROCKCHIP_PHY=y
+CONFIG_VITESSE_PHY=y
 CONFIG_USB_PEGASUS=m
 CONFIG_USB_RTL8150=m
 CONFIG_USB_RTL8152=m
@@ -322,6 +353,7 @@
 CONFIG_TOUCHSCREEN_ATMEL_MXT=m
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_PM8941_PWRKEY=y
+CONFIG_INPUT_PM8XXX_VIBRATOR=m
 CONFIG_INPUT_HISI_POWERKEY=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_AMBAKMI=y
@@ -390,8 +422,11 @@
 CONFIG_SPI_ARMADA_3700=y
 CONFIG_SPI_BCM2835=m
 CONFIG_SPI_BCM2835AUX=m
+CONFIG_SPI_FSL_LPSPI=y
+CONFIG_SPI_FSL_QUADSPI=y
 CONFIG_SPI_NXP_FLEXSPI=y
 CONFIG_SPI_IMX=m
+CONFIG_SPI_FSL_DSPI=y
 CONFIG_SPI_MESON_SPICC=m
 CONFIG_SPI_MESON_SPIFC=m
 CONFIG_SPI_ORION=y
@@ -401,6 +436,7 @@
 CONFIG_SPI_QUP=y
 CONFIG_SPI_QCOM_GENI=m
 CONFIG_SPI_S3C64XX=y
+CONFIG_SPI_SH_MSIOF=m
 CONFIG_SPI_SUN6I=y
 CONFIG_SPI_SPIDEV=m
 CONFIG_SPMI=y
@@ -411,9 +447,11 @@
 CONFIG_PINCTRL_S900=y
 CONFIG_PINCTRL_IMX8MM=y
 CONFIG_PINCTRL_IMX8MN=y
+CONFIG_PINCTRL_IMX8MP=y
 CONFIG_PINCTRL_IMX8MQ=y
 CONFIG_PINCTRL_IMX8QXP=y
 CONFIG_PINCTRL_IPQ8074=y
+CONFIG_PINCTRL_IPQ6018=y
 CONFIG_PINCTRL_MSM8916=y
 CONFIG_PINCTRL_MSM8994=y
 CONFIG_PINCTRL_MSM8996=y
@@ -426,14 +464,17 @@
 CONFIG_GPIO_ALTERA=m
 CONFIG_GPIO_DWAPB=y
 CONFIG_GPIO_MB86S7X=y
+CONFIG_GPIO_MPC8XXX=y
 CONFIG_GPIO_PL061=y
 CONFIG_GPIO_RCAR=y
 CONFIG_GPIO_UNIPHIER=y
+CONFIG_GPIO_WCD934X=m
 CONFIG_GPIO_XGENE=y
 CONFIG_GPIO_XGENE_SB=y
 CONFIG_GPIO_MAX732X=y
 CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_PCA953X_IRQ=y
+CONFIG_GPIO_BD9571MWV=m
 CONFIG_GPIO_MAX77620=y
 CONFIG_POWER_AVS=y
 CONFIG_QCOM_CPR=y
@@ -455,6 +496,8 @@
 CONFIG_THERMAL_EMULATION=y
 CONFIG_QORIQ_THERMAL=m
 CONFIG_SUN8I_THERMAL=y
+CONFIG_IMX_SC_THERMAL=m
+CONFIG_IMX8MM_THERMAL=m
 CONFIG_ROCKCHIP_THERMAL=m
 CONFIG_RCAR_THERMAL=y
 CONFIG_RCAR_GEN3_THERMAL=y
@@ -469,14 +512,15 @@
 CONFIG_UNIPHIER_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_ARM_SP805_WATCHDOG=y
+CONFIG_ARM_SBSA_WATCHDOG=y
 CONFIG_S3C2410_WATCHDOG=y
 CONFIG_DW_WATCHDOG=y
 CONFIG_SUNXI_WATCHDOG=m
 CONFIG_IMX2_WDT=y
 CONFIG_IMX_SC_WDT=m
+CONFIG_QCOM_WDT=m
 CONFIG_MESON_GXBB_WATCHDOG=m
 CONFIG_MESON_WATCHDOG=m
-CONFIG_QCOM_WDT=m
 CONFIG_RENESAS_WDT=y
 CONFIG_UNIPHIER_WATCHDOG=y
 CONFIG_BCM2835_WDT=y
@@ -492,6 +536,7 @@
 CONFIG_MFD_RK808=y
 CONFIG_MFD_SEC_CORE=y
 CONFIG_MFD_ROHM_BD718XX=y
+CONFIG_MFD_WCD934X=m
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_AXP20X=y
 CONFIG_REGULATOR_BD718XX=y
@@ -519,21 +564,28 @@
 CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
 CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
+CONFIG_MEDIA_SDR_SUPPORT=y
 CONFIG_MEDIA_CONTROLLER=y
 CONFIG_VIDEO_V4L2_SUBDEV_API=y
 # CONFIG_DVB_NET is not set
 CONFIG_MEDIA_USB_SUPPORT=y
 CONFIG_USB_VIDEO_CLASS=m
 CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_VIDEO_RCAR_CSI2=m
+CONFIG_VIDEO_RCAR_VIN=m
 CONFIG_VIDEO_SUN6I_CSI=m
 CONFIG_V4L_MEM2MEM_DRIVERS=y
 CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m
 CONFIG_VIDEO_SAMSUNG_S5P_MFC=m
 CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m
+CONFIG_VIDEO_RENESAS_FDP1=m
 CONFIG_VIDEO_RENESAS_FCP=m
 CONFIG_VIDEO_RENESAS_VSP1=m
+CONFIG_SDR_PLATFORM_DRIVERS=y
+CONFIG_VIDEO_RCAR_DRIF=m
 CONFIG_DRM=m
 CONFIG_DRM_I2C_NXP_TDA998X=m
+CONFIG_DRM_MALI_DISPLAY=m
 CONFIG_DRM_NOUVEAU=m
 CONFIG_DRM_EXYNOS=m
 CONFIG_DRM_EXYNOS5433_DECON=y
@@ -549,16 +601,23 @@
 CONFIG_ROCKCHIP_DW_MIPI_DSI=y
 CONFIG_ROCKCHIP_INNO_HDMI=y
 CONFIG_DRM_RCAR_DU=m
+CONFIG_DRM_RCAR_DW_HDMI=m
 CONFIG_DRM_SUN4I=m
 CONFIG_DRM_SUN6I_DSI=m
 CONFIG_DRM_SUN8I_DW_HDMI=m
 CONFIG_DRM_SUN8I_MIXER=m
 CONFIG_DRM_MSM=m
 CONFIG_DRM_TEGRA=m
+CONFIG_DRM_PANEL_LVDS=m
 CONFIG_DRM_PANEL_SIMPLE=m
+CONFIG_DRM_DUMB_VGA_DAC=m
+CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA=m
 CONFIG_DRM_SII902X=m
+CONFIG_DRM_THINE_THC63LVD1024=m
 CONFIG_DRM_TI_SN65DSI86=m
 CONFIG_DRM_I2C_ADV7511=m
+CONFIG_DRM_DW_HDMI_AHB_AUDIO=m
+CONFIG_DRM_DW_HDMI_CEC=m
 CONFIG_DRM_VC4=m
 CONFIG_DRM_ETNAVIV=m
 CONFIG_DRM_HISI_HIBMC=m
@@ -583,6 +642,7 @@
 CONFIG_SND_SOC=y
 CONFIG_SND_BCM2835_SOC_I2S=m
 CONFIG_SND_MESON_AXG_SOUND_CARD=m
+CONFIG_SND_SOC_SDM845=m
 CONFIG_SND_SOC_ROCKCHIP=m
 CONFIG_SND_SOC_ROCKCHIP_SPDIF=m
 CONFIG_SND_SOC_ROCKCHIP_RT5645=m
@@ -595,11 +655,13 @@
 CONFIG_SND_SOC_ES7241=m
 CONFIG_SND_SOC_PCM3168A_I2C=m
 CONFIG_SND_SOC_TAS571X=m
+CONFIG_SND_SOC_WCD934X=m
+CONFIG_SND_SOC_WSA881X=m
 CONFIG_SND_SIMPLE_CARD=m
 CONFIG_SND_AUDIO_GRAPH_CARD=m
 CONFIG_I2C_HID=m
-CONFIG_USB=y
 CONFIG_USB_CONN_GPIO=m
+CONFIG_USB=y
 CONFIG_USB_OTG=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_TEGRA=y
@@ -609,6 +671,7 @@
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_EXYNOS=y
 CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_RENESAS_USBHS_HCD=m
 CONFIG_USB_RENESAS_USBHS=m
 CONFIG_USB_STORAGE=y
 CONFIG_USB_MUSB_HDRC=y
@@ -621,7 +684,6 @@
 CONFIG_USB_ISP1760=y
 CONFIG_USB_HSIC_USB3503=y
 CONFIG_NOP_USB_XCEIV=y
-CONFIG_USB_ULPI=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_RENESAS_USBHS_UDC=m
 CONFIG_USB_RENESAS_USB3=m
@@ -669,11 +731,14 @@
 CONFIG_EDAC=y
 CONFIG_EDAC_GHES=y
 CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS1307=m
 CONFIG_RTC_DRV_MAX77686=y
 CONFIG_RTC_DRV_RK808=m
+CONFIG_RTC_DRV_PCF85363=m
 CONFIG_RTC_DRV_RX8581=m
 CONFIG_RTC_DRV_S5M=y
 CONFIG_RTC_DRV_DS3232=y
+CONFIG_RTC_DRV_PCF2127=m
 CONFIG_RTC_DRV_EFI=y
 CONFIG_RTC_DRV_CROS_EC=y
 CONFIG_RTC_DRV_S3C=y
@@ -716,8 +781,8 @@
 CONFIG_COMMON_CLK_SCPI=y
 CONFIG_COMMON_CLK_CS2000_CP=y
 CONFIG_COMMON_CLK_S2MPS11=y
-CONFIG_CLK_QORIQ=y
 CONFIG_COMMON_CLK_PWM=y
+CONFIG_COMMON_CLK_VC5=y
 CONFIG_CLK_RASPBERRYPI=m
 CONFIG_CLK_IMX8MM=y
 CONFIG_CLK_IMX8MN=y
@@ -731,12 +796,15 @@
 CONFIG_QCOM_CLK_SMD_RPM=y
 CONFIG_QCOM_CLK_RPMH=y
 CONFIG_IPQ_GCC_8074=y
+CONFIG_IPQ_GCC_6018=y
 CONFIG_MSM_GCC_8916=y
 CONFIG_MSM_GCC_8994=y
 CONFIG_MSM_MMCC_8996=y
 CONFIG_MSM_GCC_8998=y
 CONFIG_QCS_GCC_404=y
 CONFIG_SDM_GCC_845=y
+CONFIG_SDM_GPUCC_845=y
+CONFIG_SDM_DISPCC_845=y
 CONFIG_SM_GCC_8150=y
 CONFIG_QCOM_HFPLL=y
 CONFIG_HWSPINLOCK=y
@@ -758,11 +826,14 @@
 CONFIG_RPMSG_QCOM_GLINK_RPM=y
 CONFIG_RPMSG_QCOM_GLINK_SMEM=m
 CONFIG_RPMSG_QCOM_SMD=y
+CONFIG_SOUNDWIRE=m
+CONFIG_SOUNDWIRE_QCOM=m
 CONFIG_OWL_PM_DOMAINS=y
 CONFIG_RASPBERRYPI_POWER=y
+CONFIG_FSL_DPAA=y
+CONFIG_FSL_MC_DPIO=y
 CONFIG_IMX_SCU_SOC=y
 CONFIG_QCOM_AOSS_QMP=y
-CONFIG_QCOM_COMMAND_DB=y
 CONFIG_QCOM_GENI_SE=y
 CONFIG_QCOM_GLINK_SSR=m
 CONFIG_QCOM_RMTFS_MEM=m
@@ -773,6 +844,7 @@
 CONFIG_QCOM_SMP2P=y
 CONFIG_QCOM_SMSM=y
 CONFIG_QCOM_SOCINFO=m
+CONFIG_QCOM_APR=m
 CONFIG_ARCH_R8A774A1=y
 CONFIG_ARCH_R8A774B1=y
 CONFIG_ARCH_R8A774C0=y
@@ -784,7 +856,6 @@
 CONFIG_ARCH_R8A77980=y
 CONFIG_ARCH_R8A77990=y
 CONFIG_ARCH_R8A77995=y
-CONFIG_QCOM_PDC=y
 CONFIG_ROCKCHIP_PM_DOMAINS=y
 CONFIG_ARCH_TEGRA_132_SOC=y
 CONFIG_ARCH_TEGRA_210_SOC=y
@@ -795,9 +866,9 @@
 CONFIG_TI_SCI_PM_DOMAINS=y
 CONFIG_EXTCON_USB_GPIO=y
 CONFIG_EXTCON_USBC_CROS_EC=y
-CONFIG_MEMORY=y
 CONFIG_IIO=y
 CONFIG_EXYNOS_ADC=y
+CONFIG_MAX9611=m
 CONFIG_QCOM_SPMI_ADC5=m
 CONFIG_ROCKCHIP_SARADC=m
 CONFIG_IIO_CROS_EC_SENSORS_CORE=m
@@ -815,6 +886,7 @@
 CONFIG_PWM_SAMSUNG=y
 CONFIG_PWM_SUN4I=m
 CONFIG_PWM_TEGRA=m
+CONFIG_QCOM_PDC=y
 CONFIG_RESET_QCOM_AOSS=y
 CONFIG_RESET_QCOM_PDC=m
 CONFIG_RESET_TI_SCI=y
@@ -858,6 +930,10 @@
 CONFIG_OF_FPGA_REGION=m
 CONFIG_TEE=y
 CONFIG_OPTEE=y
+CONFIG_SLIMBUS=m
+CONFIG_SLIM_QCOM_CTRL=m
+CONFIG_SLIM_QCOM_NGD_CTRL=m
+CONFIG_MUX_MMIO=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y
@@ -886,16 +962,18 @@
 CONFIG_SECURITY=y
 CONFIG_CRYPTO_ECHAINIV=y
 CONFIG_CRYPTO_ANSI_CPRNG=y
+CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_DEV_SUN8I_CE=m
 CONFIG_CRYPTO_DEV_FSL_CAAM=m
-CONFIG_CRYPTO_DEV_HISI_ZIP=m
-CONFIG_CRYPTO_USER_API_RNG=m
+CONFIG_CRYPTO_DEV_FSL_DPAA2_CAAM=m
 CONFIG_CRYPTO_DEV_QCOM_RNG=m
+CONFIG_CRYPTO_DEV_CCREE=m
+CONFIG_CRYPTO_DEV_HISI_ZIP=m
 CONFIG_CMA_SIZE_MBYTES=32
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_FS=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set
diff --git a/arch/arm64/crypto/.gitignore b/arch/arm64/crypto/.gitignore
index e403b13..fcf2d73 100644
--- a/arch/arm64/crypto/.gitignore
+++ b/arch/arm64/crypto/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 sha256-core.S
 sha512-core.S
 poly1305-core.S
diff --git a/arch/arm64/include/asm/archrandom.h b/arch/arm64/include/asm/archrandom.h
index 3fe02da..fc1594a 100644
--- a/arch/arm64/include/asm/archrandom.h
+++ b/arch/arm64/include/asm/archrandom.h
@@ -4,6 +4,8 @@
 
 #ifdef CONFIG_ARCH_RANDOM
 
+#include <linux/bug.h>
+#include <linux/kernel.h>
 #include <linux/random.h>
 #include <asm/cpufeature.h>
 
@@ -66,6 +68,18 @@ static inline bool __init __early_cpu_has_rndr(void)
 	return (ftr >> ID_AA64ISAR0_RNDR_SHIFT) & 0xf;
 }
 
+static inline bool __init __must_check
+arch_get_random_seed_long_early(unsigned long *v)
+{
+	WARN_ON(system_state != SYSTEM_BOOTING);
+
+	if (!__early_cpu_has_rndr())
+		return false;
+
+	return __arm64_rndr(v);
+}
+#define arch_get_random_seed_long_early arch_get_random_seed_long_early
+
 #else
 
 static inline bool __arm64_rndr(unsigned long *v) { return false; }
diff --git a/arch/arm64/include/asm/memory.h b/arch/arm64/include/asm/memory.h
index 2be67b23..a1871bb 100644
--- a/arch/arm64/include/asm/memory.h
+++ b/arch/arm64/include/asm/memory.h
@@ -120,22 +120,12 @@
 
 /*
  * Alignment of kernel segments (e.g. .text, .data).
- */
-#if defined(CONFIG_DEBUG_ALIGN_RODATA)
-/*
- *  4 KB granule:   1 level 2 entry
- * 16 KB granule: 128 level 3 entries, with contiguous bit
- * 64 KB granule:  32 level 3 entries, with contiguous bit
- */
-#define SEGMENT_ALIGN		SZ_2M
-#else
-/*
+ *
  *  4 KB granule:  16 level 3 entries, with contiguous bit
  * 16 KB granule:   4 level 3 entries, without contiguous bit
  * 64 KB granule:   1 level 3 entry
  */
 #define SEGMENT_ALIGN		SZ_64K
-#endif
 
 /*
  * Memory types available.
diff --git a/arch/arm64/include/asm/page.h b/arch/arm64/include/asm/page.h
index 75d6cd2..c01b52a 100644
--- a/arch/arm64/include/asm/page.h
+++ b/arch/arm64/include/asm/page.h
@@ -36,9 +36,7 @@ extern int pfn_valid(unsigned long);
 
 #endif /* !__ASSEMBLY__ */
 
-#define VM_DATA_DEFAULT_FLAGS \
-	(((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0) | \
-	 VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+#define VM_DATA_DEFAULT_FLAGS	VM_DATA_FLAGS_TSK_EXEC
 
 #include <asm-generic/getorder.h>
 
diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
index ebc6224..c4ac0ac 100644
--- a/arch/arm64/include/asm/sysreg.h
+++ b/arch/arm64/include/asm/sysreg.h
@@ -49,7 +49,9 @@
 #ifndef CONFIG_BROKEN_GAS_INST
 
 #ifdef __ASSEMBLY__
-#define __emit_inst(x)			.inst (x)
+// The space separator is omitted so that __emit_inst(x) can be parsed as
+// either an assembler directive or an assembler macro argument.
+#define __emit_inst(x)			.inst(x)
 #else
 #define __emit_inst(x)			".inst " __stringify((x)) "\n\t"
 #endif
diff --git a/arch/arm64/kernel/.gitignore b/arch/arm64/kernel/.gitignore
index c5f676c..bbb90f9 100644
--- a/arch/arm64/kernel/.gitignore
+++ b/arch/arm64/kernel/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 vmlinux.lds
diff --git a/arch/arm64/kernel/armv8_deprecated.c b/arch/arm64/kernel/armv8_deprecated.c
index 4cc581a..c19aa81 100644
--- a/arch/arm64/kernel/armv8_deprecated.c
+++ b/arch/arm64/kernel/armv8_deprecated.c
@@ -601,7 +601,7 @@ static struct undef_hook setend_hooks[] = {
 	},
 	{
 		/* Thumb mode */
-		.instr_mask	= 0x0000fff7,
+		.instr_mask	= 0xfffffff7,
 		.instr_val	= 0x0000b650,
 		.pstate_mask	= (PSR_AA32_T_BIT | PSR_AA32_MODE_MASK),
 		.pstate_val	= (PSR_AA32_T_BIT | PSR_AA32_MODE_USR),
diff --git a/arch/arm64/kernel/vdso.c b/arch/arm64/kernel/vdso.c
index 354b11e..033a48f 100644
--- a/arch/arm64/kernel/vdso.c
+++ b/arch/arm64/kernel/vdso.c
@@ -260,18 +260,7 @@ static int __aarch32_alloc_vdso_pages(void)
 	if (ret)
 		return ret;
 
-	ret = aarch32_alloc_kuser_vdso_page();
-	if (ret) {
-		unsigned long c_vvar =
-			(unsigned long)page_to_virt(aarch32_vdso_pages[C_VVAR]);
-		unsigned long c_vdso =
-			(unsigned long)page_to_virt(aarch32_vdso_pages[C_VDSO]);
-
-		free_page(c_vvar);
-		free_page(c_vdso);
-	}
-
-	return ret;
+	return aarch32_alloc_kuser_vdso_page();
 }
 #else
 static int __aarch32_alloc_vdso_pages(void)
diff --git a/arch/arm64/kernel/vdso/.gitignore b/arch/arm64/kernel/vdso/.gitignore
index f8b69d8..652e31d 100644
--- a/arch/arm64/kernel/vdso/.gitignore
+++ b/arch/arm64/kernel/vdso/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 vdso.lds
diff --git a/arch/arm64/kernel/vdso32/.gitignore b/arch/arm64/kernel/vdso32/.gitignore
index 4fea950..3542fa2 100644
--- a/arch/arm64/kernel/vdso32/.gitignore
+++ b/arch/arm64/kernel/vdso32/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 vdso.lds
 vdso.so.raw
diff --git a/arch/arm64/kvm/Kconfig b/arch/arm64/kvm/Kconfig
index a475c68..449386d 100644
--- a/arch/arm64/kvm/Kconfig
+++ b/arch/arm64/kvm/Kconfig
@@ -64,6 +64,4 @@
 config KVM_INDIRECT_VECTORS
        def_bool KVM && (HARDEN_BRANCH_PREDICTOR || HARDEN_EL2_VECTORS)
 
-source "drivers/vhost/Kconfig"
-
 endif # VIRTUALIZATION
diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c
index 1027851..c9cedc0 100644
--- a/arch/arm64/mm/fault.c
+++ b/arch/arm64/mm/fault.c
@@ -445,7 +445,7 @@ static int __kprobes do_page_fault(unsigned long addr, unsigned int esr,
 	const struct fault_info *inf;
 	struct mm_struct *mm = current->mm;
 	vm_fault_t fault, major = 0;
-	unsigned long vm_flags = VM_READ | VM_WRITE | VM_EXEC;
+	unsigned long vm_flags = VM_ACCESS_FLAGS;
 	unsigned int mm_flags = FAULT_FLAG_DEFAULT;
 
 	if (kprobe_page_fault(regs, esr))
diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
index b65dffd..e42727e 100644
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -29,6 +29,7 @@
 #include <linux/mm.h>
 #include <linux/kexec.h>
 #include <linux/crash_dump.h>
+#include <linux/hugetlb.h>
 
 #include <asm/boot.h>
 #include <asm/fixmap.h>
@@ -457,6 +458,11 @@ void __init arm64_memblock_init(void)
 	high_memory = __va(memblock_end_of_DRAM() - 1) + 1;
 
 	dma_contiguous_reserve(arm64_dma32_phys_limit);
+
+#ifdef CONFIG_ARM64_4K_PAGES
+	hugetlb_cma_reserve(PUD_SHIFT - PAGE_SHIFT);
+#endif
+
 }
 
 void __init bootmem_init(void)
diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c
index 9b08f7c..a374e4f 100644
--- a/arch/arm64/mm/mmu.c
+++ b/arch/arm64/mm/mmu.c
@@ -1374,7 +1374,7 @@ static void __remove_pgd_mapping(pgd_t *pgdir, unsigned long start, u64 size)
 }
 
 int arch_add_memory(int nid, u64 start, u64 size,
-			struct mhp_restrictions *restrictions)
+		    struct mhp_params *params)
 {
 	int ret, flags = 0;
 
@@ -1382,12 +1382,13 @@ int arch_add_memory(int nid, u64 start, u64 size,
 		flags = NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS;
 
 	__create_pgd_mapping(swapper_pg_dir, start, __phys_to_virt(start),
-			     size, PAGE_KERNEL, __pgd_pgtable_alloc, flags);
+			     size, params->pgprot, __pgd_pgtable_alloc,
+			     flags);
 
 	memblock_clear_nomap(start, size);
 
 	ret = __add_pages(nid, start >> PAGE_SHIFT, size >> PAGE_SHIFT,
-			   restrictions);
+			   params);
 	if (ret)
 		__remove_pgd_mapping(swapper_pg_dir,
 				     __phys_to_virt(start), size);
diff --git a/arch/c6x/include/asm/page.h b/arch/c6x/include/asm/page.h
index 70db1e7..4007989 100644
--- a/arch/c6x/include/asm/page.h
+++ b/arch/c6x/include/asm/page.h
@@ -2,10 +2,7 @@
 #ifndef _ASM_C6X_PAGE_H
 #define _ASM_C6X_PAGE_H
 
-#define VM_DATA_DEFAULT_FLAGS \
-	(VM_READ | VM_WRITE | \
-	((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0) | \
-		 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+#define VM_DATA_DEFAULT_FLAGS	VM_DATA_FLAGS_TSK_EXEC
 
 #include <asm-generic/page.h>
 
diff --git a/arch/c6x/include/asm/unaligned.h b/arch/c6x/include/asm/unaligned.h
index b56ba71..d628cc1 100644
--- a/arch/c6x/include/asm/unaligned.h
+++ b/arch/c6x/include/asm/unaligned.h
@@ -10,6 +10,7 @@
 #define _ASM_C6X_UNALIGNED_H
 
 #include <linux/swab.h>
+#include <linux/unaligned/generic.h>
 
 /*
  * The C64x+ can do unaligned word and dword accesses in hardware
@@ -100,68 +101,4 @@ static inline void put_unaligned64(u64 val, const void *p)
 
 #endif
 
-/*
- * Cause a link-time error if we try an unaligned access other than
- * 1,2,4 or 8 bytes long
- */
-extern int __bad_unaligned_access_size(void);
-
-#define __get_unaligned_le(ptr) (typeof(*(ptr)))({			\
-	sizeof(*(ptr)) == 1 ? *(ptr) :					\
-	  (sizeof(*(ptr)) == 2 ? get_unaligned_le16((ptr)) :		\
-	     (sizeof(*(ptr)) == 4 ? get_unaligned_le32((ptr)) :		\
-		(sizeof(*(ptr)) == 8 ? get_unaligned_le64((ptr)) :	\
-		   __bad_unaligned_access_size())));			\
-	})
-
-#define __get_unaligned_be(ptr) (__force typeof(*(ptr)))({	\
-	sizeof(*(ptr)) == 1 ? *(ptr) :					\
-	  (sizeof(*(ptr)) == 2 ? get_unaligned_be16((ptr)) :		\
-	     (sizeof(*(ptr)) == 4 ? get_unaligned_be32((ptr)) :		\
-		(sizeof(*(ptr)) == 8 ? get_unaligned_be64((ptr)) :	\
-		   __bad_unaligned_access_size())));			\
-	})
-
-#define __put_unaligned_le(val, ptr) ({					\
-	void *__gu_p = (ptr);						\
-	switch (sizeof(*(ptr))) {					\
-	case 1:								\
-		*(u8 *)__gu_p = (__force u8)(val);			\
-		break;							\
-	case 2:								\
-		put_unaligned_le16((__force u16)(val), __gu_p);		\
-		break;							\
-	case 4:								\
-		put_unaligned_le32((__force u32)(val), __gu_p);		\
-		break;							\
-	case 8:								\
-		put_unaligned_le64((__force u64)(val), __gu_p);		\
-		break;							\
-	default:							\
-		__bad_unaligned_access_size();				\
-		break;							\
-	}								\
-	(void)0; })
-
-#define __put_unaligned_be(val, ptr) ({					\
-	void *__gu_p = (ptr);						\
-	switch (sizeof(*(ptr))) {					\
-	case 1:								\
-		*(u8 *)__gu_p = (__force u8)(val);			\
-		break;							\
-	case 2:								\
-		put_unaligned_be16((__force u16)(val), __gu_p);		\
-		break;							\
-	case 4:								\
-		put_unaligned_be32((__force u32)(val), __gu_p);		\
-		break;							\
-	case 8:								\
-		put_unaligned_be64((__force u64)(val), __gu_p);		\
-		break;							\
-	default:							\
-		__bad_unaligned_access_size();				\
-		break;							\
-	}								\
-	(void)0; })
-
 #endif /* _ASM_C6X_UNALIGNED_H */
diff --git a/arch/csky/Kconfig b/arch/csky/Kconfig
index 047427f..94545d5 100644
--- a/arch/csky/Kconfig
+++ b/arch/csky/Kconfig
@@ -3,6 +3,7 @@
 	def_bool y
 	select ARCH_32BIT_OFF_T
 	select ARCH_HAS_DMA_PREP_COHERENT
+	select ARCH_HAS_GCOV_PROFILE_ALL
 	select ARCH_HAS_SYNC_DMA_FOR_CPU
 	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
 	select ARCH_USE_BUILTIN_BSWAP
@@ -38,16 +39,22 @@
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_COPY_THREAD_TLS
 	select HAVE_DYNAMIC_FTRACE
+	select HAVE_DYNAMIC_FTRACE_WITH_REGS
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_FTRACE_MCOUNT_RECORD
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_LZO
 	select HAVE_KERNEL_LZMA
+	select HAVE_KPROBES if !CPU_CK610
+	select HAVE_KPROBES_ON_FTRACE if !CPU_CK610
+	select HAVE_KRETPROBES if !CPU_CK610
 	select HAVE_PERF_EVENTS
 	select HAVE_PERF_REGS
 	select HAVE_PERF_USER_STACK_DUMP
 	select HAVE_DMA_CONTIGUOUS
+	select HAVE_REGS_AND_STACK_ACCESS_API
+	select HAVE_RSEQ
 	select HAVE_STACKPROTECTOR
 	select HAVE_SYSCALL_TRACEPOINTS
 	select MAY_HAVE_SPARSE_IRQ
@@ -65,6 +72,12 @@
 	select PCI_SYSCALL if PCI
 	select PCI_MSI if PCI
 
+config LOCKDEP_SUPPORT
+	def_bool y
+
+config ARCH_SUPPORTS_UPROBES
+	def_bool y if !CPU_CK610
+
 config CPU_HAS_CACHEV2
 	bool
 
diff --git a/arch/csky/abiv1/inc/abi/entry.h b/arch/csky/abiv1/inc/abi/entry.h
index f35a9f3..5056ebb 100644
--- a/arch/csky/abiv1/inc/abi/entry.h
+++ b/arch/csky/abiv1/inc/abi/entry.h
@@ -172,10 +172,7 @@
 	addi	r6, 0xe
 	cpwcr	r6, cpcr30
 
-	lsri	r6, 28
-	addi	r6, 2
-	lsli	r6, 28
-	addi	r6, 0xe
+	movi	r6, 0
 	cpwcr	r6, cpcr31
 .endm
 
diff --git a/arch/csky/abiv2/fpu.c b/arch/csky/abiv2/fpu.c
index 86d187d..5acc5c2 100644
--- a/arch/csky/abiv2/fpu.c
+++ b/arch/csky/abiv2/fpu.c
@@ -10,11 +10,6 @@
 #define MTCR_DIST	0xC0006420
 #define MFCR_DIST	0xC0006020
 
-void __init init_fpu(void)
-{
-	mtcr("cr<1, 2>", 0);
-}
-
 /*
  * fpu_libc_helper() is to help libc to excute:
  *  - mfcr %a, cr<1, 2>
diff --git a/arch/csky/abiv2/inc/abi/entry.h b/arch/csky/abiv2/inc/abi/entry.h
index 94a7a58..a99aff5 100644
--- a/arch/csky/abiv2/inc/abi/entry.h
+++ b/arch/csky/abiv2/inc/abi/entry.h
@@ -100,6 +100,66 @@
 	rte
 .endm
 
+.macro SAVE_REGS_FTRACE
+	subi    sp, 152
+	stw	tls, (sp, 0)
+	stw	lr, (sp, 4)
+
+	mfcr	lr, psr
+	stw	lr, (sp, 12)
+
+	addi    lr, sp, 152
+	stw	lr, (sp, 16)
+
+	stw     a0, (sp, 20)
+	stw     a0, (sp, 24)
+	stw     a1, (sp, 28)
+	stw     a2, (sp, 32)
+	stw     a3, (sp, 36)
+
+	addi	sp, 40
+	stm	r4-r13, (sp)
+
+	addi    sp, 40
+	stm     r16-r30, (sp)
+#ifdef CONFIG_CPU_HAS_HILO
+	mfhi	lr
+	stw	lr, (sp, 60)
+	mflo	lr
+	stw	lr, (sp, 64)
+	mfcr	lr, cr14
+	stw	lr, (sp, 68)
+#endif
+	subi	sp, 80
+.endm
+
+.macro	RESTORE_REGS_FTRACE
+	ldw	tls, (sp, 0)
+	ldw	a0, (sp, 16)
+	mtcr	a0, ss0
+
+#ifdef CONFIG_CPU_HAS_HILO
+	ldw	a0, (sp, 140)
+	mthi	a0
+	ldw	a0, (sp, 144)
+	mtlo	a0
+	ldw	a0, (sp, 148)
+	mtcr	a0, cr14
+#endif
+
+	ldw     a0, (sp, 24)
+	ldw     a1, (sp, 28)
+	ldw     a2, (sp, 32)
+	ldw     a3, (sp, 36)
+
+	addi	sp, 40
+	ldm	r4-r13, (sp)
+	addi    sp, 40
+	ldm     r16-r30, (sp)
+	addi    sp, 72
+	mfcr	sp, ss0
+.endm
+
 .macro SAVE_SWITCH_STACK
 	subi    sp, 64
 	stm	r4-r11, (sp)
@@ -230,11 +290,8 @@
 	addi	r6, 0x1ce
 	mtcr	r6, cr<30, 15> /* Set MSA0 */
 
-	lsri	r6, 28
-	addi	r6, 2
-	lsli	r6, 28
-	addi	r6, 0x1ce
-	mtcr	r6, cr<31, 15> /* Set MSA1 */
+	movi    r6, 0
+	mtcr	r6, cr<31, 15> /* Clr MSA1 */
 
 	/* enable MMU */
 	mfcr    r6, cr18
diff --git a/arch/csky/abiv2/inc/abi/fpu.h b/arch/csky/abiv2/inc/abi/fpu.h
index 22ca3cf..09e2700 100644
--- a/arch/csky/abiv2/inc/abi/fpu.h
+++ b/arch/csky/abiv2/inc/abi/fpu.h
@@ -9,7 +9,8 @@
 
 int fpu_libc_helper(struct pt_regs *regs);
 void fpu_fpe(struct pt_regs *regs);
-void __init init_fpu(void);
+
+static inline void init_fpu(void) { mtcr("cr<1, 2>", 0); }
 
 void save_to_user_fp(struct user_fp *user_fp);
 void restore_from_user_fp(struct user_fp *user_fp);
diff --git a/arch/csky/abiv2/mcount.S b/arch/csky/abiv2/mcount.S
index 326402e..9331c7e 100644
--- a/arch/csky/abiv2/mcount.S
+++ b/arch/csky/abiv2/mcount.S
@@ -3,6 +3,8 @@
 
 #include <linux/linkage.h>
 #include <asm/ftrace.h>
+#include <abi/entry.h>
+#include <asm/asm-offsets.h>
 
 /*
  * csky-gcc with -pg will put the following asm after prologue:
@@ -44,6 +46,22 @@
 	jmp	t1
 .endm
 
+.macro mcount_enter_regs
+	subi	sp, 8
+	stw	lr, (sp, 0)
+	stw	r8, (sp, 4)
+	SAVE_REGS_FTRACE
+.endm
+
+.macro mcount_exit_regs
+	RESTORE_REGS_FTRACE
+	ldw	t1, (sp, 0)
+	ldw	r8, (sp, 4)
+	ldw	lr, (sp, 8)
+	addi	sp, 12
+	jmp	t1
+.endm
+
 .macro save_return_regs
 	subi	sp, 16
 	stw	a0, (sp, 0)
@@ -122,6 +140,8 @@
 	ldw	a0, (sp, 16)
 	subi	a0, 4
 	ldw	a1, (sp, 24)
+	lrw	a2, function_trace_op
+	ldw	a2, (a2, 0)
 
 	nop
 GLOBAL(ftrace_call)
@@ -157,3 +177,31 @@
 	jmp	lr
 END(return_to_handler)
 #endif
+
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
+ENTRY(ftrace_regs_caller)
+	mcount_enter_regs
+
+	lrw	t1, PT_FRAME_SIZE
+	add	t1, sp
+
+	ldw	a0, (t1, 0)
+	subi	a0, 4
+	ldw	a1, (t1, 8)
+	lrw	a2, function_trace_op
+	ldw	a2, (a2, 0)
+	mov	a3, sp
+
+	nop
+GLOBAL(ftrace_regs_call)
+	nop32_stub
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	nop
+GLOBAL(ftrace_graph_regs_call)
+	nop32_stub
+#endif
+
+	mcount_exit_regs
+ENDPROC(ftrace_regs_caller)
+#endif /* CONFIG_DYNAMIC_FTRACE */
diff --git a/arch/csky/include/asm/ftrace.h b/arch/csky/include/asm/ftrace.h
index ba35d93..fae72b0 100644
--- a/arch/csky/include/asm/ftrace.h
+++ b/arch/csky/include/asm/ftrace.h
@@ -10,6 +10,8 @@
 
 #define HAVE_FUNCTION_GRAPH_RET_ADDR_PTR
 
+#define ARCH_SUPPORTS_FTRACE_OPS 1
+
 #define MCOUNT_ADDR	((unsigned long)_mcount)
 
 #ifndef __ASSEMBLY__
diff --git a/arch/csky/include/asm/kprobes.h b/arch/csky/include/asm/kprobes.h
new file mode 100644
index 0000000..b647bbd
--- /dev/null
+++ b/arch/csky/include/asm/kprobes.h
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __ASM_CSKY_KPROBES_H
+#define __ASM_CSKY_KPROBES_H
+
+#include <asm-generic/kprobes.h>
+
+#ifdef CONFIG_KPROBES
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/percpu.h>
+
+#define __ARCH_WANT_KPROBES_INSN_SLOT
+#define MAX_INSN_SIZE			1
+
+#define flush_insn_slot(p)		do { } while (0)
+#define kretprobe_blacklist_size	0
+
+#include <asm/probes.h>
+
+struct prev_kprobe {
+	struct kprobe *kp;
+	unsigned int status;
+};
+
+/* Single step context for kprobe */
+struct kprobe_step_ctx {
+	unsigned long ss_pending;
+	unsigned long match_addr;
+};
+
+/* per-cpu kprobe control block */
+struct kprobe_ctlblk {
+	unsigned int kprobe_status;
+	unsigned long saved_sr;
+	struct prev_kprobe prev_kprobe;
+	struct kprobe_step_ctx ss_ctx;
+};
+
+void arch_remove_kprobe(struct kprobe *p);
+int kprobe_fault_handler(struct pt_regs *regs, unsigned int trapnr);
+int kprobe_breakpoint_handler(struct pt_regs *regs);
+int kprobe_single_step_handler(struct pt_regs *regs);
+void kretprobe_trampoline(void);
+void __kprobes *trampoline_probe_handler(struct pt_regs *regs);
+
+#endif /* CONFIG_KPROBES */
+#endif /* __ASM_CSKY_KPROBES_H */
diff --git a/arch/csky/include/asm/page.h b/arch/csky/include/asm/page.h
index 9738eac..9b98bf3 100644
--- a/arch/csky/include/asm/page.h
+++ b/arch/csky/include/asm/page.h
@@ -85,9 +85,6 @@ extern unsigned long va_pa_offset;
 				 PHYS_OFFSET_OFFSET)
 #define virt_to_page(x)	(mem_map + MAP_NR(x))
 
-#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
-				VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
 #define pfn_to_kaddr(x)	__va(PFN_PHYS(x))
 
 #include <asm-generic/memory_model.h>
diff --git a/arch/csky/include/asm/pgtable.h b/arch/csky/include/asm/pgtable.h
index 9b7764c..9ab4a44 100644
--- a/arch/csky/include/asm/pgtable.h
+++ b/arch/csky/include/asm/pgtable.h
@@ -110,9 +110,6 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
 extern void load_pgd(unsigned long pg_dir);
 extern pte_t invalid_pte_table[PTRS_PER_PTE];
 
-static inline int pte_special(pte_t pte) { return 0; }
-static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
-
 static inline void set_pte(pte_t *p, pte_t pte)
 {
 	*p = pte;
diff --git a/arch/csky/include/asm/probes.h b/arch/csky/include/asm/probes.h
new file mode 100644
index 0000000..5e52633
--- /dev/null
+++ b/arch/csky/include/asm/probes.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __ASM_CSKY_PROBES_H
+#define __ASM_CSKY_PROBES_H
+
+typedef u32 probe_opcode_t;
+typedef void (probes_handler_t) (u32 opcode, long addr, struct pt_regs *);
+
+/* architecture specific copy of original instruction */
+struct arch_probe_insn {
+	probe_opcode_t *insn;
+	probes_handler_t *handler;
+	/* restore address after simulation */
+	unsigned long restore;
+};
+
+#ifdef CONFIG_KPROBES
+typedef u32 kprobe_opcode_t;
+struct arch_specific_insn {
+	struct arch_probe_insn api;
+};
+#endif
+
+#endif /* __ASM_CSKY_PROBES_H */
diff --git a/arch/csky/include/asm/processor.h b/arch/csky/include/asm/processor.h
index 21e0bd5..c6bcd7f 100644
--- a/arch/csky/include/asm/processor.h
+++ b/arch/csky/include/asm/processor.h
@@ -43,6 +43,7 @@ extern struct cpuinfo_csky cpu_data[];
 struct thread_struct {
 	unsigned long  ksp;       /* kernel stack pointer */
 	unsigned long  sr;        /* saved status register */
+	unsigned long  trap_no;   /* saved status register */
 
 	/* FPU regs */
 	struct user_fp __aligned(16) user_fp;
diff --git a/arch/csky/include/asm/ptrace.h b/arch/csky/include/asm/ptrace.h
index d0aba7b..aae5aa9 100644
--- a/arch/csky/include/asm/ptrace.h
+++ b/arch/csky/include/asm/ptrace.h
@@ -7,11 +7,14 @@
 #include <uapi/asm/ptrace.h>
 #include <asm/traps.h>
 #include <linux/types.h>
+#include <linux/compiler.h>
 
 #ifndef __ASSEMBLY__
 
 #define PS_S	0x80000000 /* Supervisor Mode */
 
+#define USR_BKPT	0x1464
+
 #define arch_has_single_step() (1)
 #define current_pt_regs() \
 ({ (struct pt_regs *)((char *)current_thread_info() + THREAD_SIZE) - 1; })
@@ -22,6 +25,18 @@
 #define instruction_pointer(regs) ((regs)->pc)
 #define profile_pc(regs) instruction_pointer(regs)
 
+static inline void instruction_pointer_set(struct pt_regs *regs,
+					   unsigned long val)
+{
+	regs->pc = val;
+}
+
+#if defined(__CSKYABIV2__)
+#define MAX_REG_OFFSET offsetof(struct pt_regs, dcsr)
+#else
+#define MAX_REG_OFFSET offsetof(struct pt_regs, regs[9])
+#endif
+
 static inline bool in_syscall(struct pt_regs const *regs)
 {
 	return ((regs->sr >> 16) & 0xff) == VEC_TRAP0;
@@ -37,5 +52,33 @@ static inline unsigned long regs_return_value(struct pt_regs *regs)
 	return regs->a0;
 }
 
+/* Valid only for Kernel mode traps. */
+static inline unsigned long kernel_stack_pointer(struct pt_regs *regs)
+{
+	return regs->usp;
+}
+
+extern int regs_query_register_offset(const char *name);
+extern unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs,
+						unsigned int n);
+
+/*
+ * regs_get_register() - get register value from its offset
+ * @regs:      pt_regs from which register value is gotten
+ * @offset:    offset of the register.
+ *
+ * regs_get_register returns the value of a register whose offset from @regs.
+ * The @offset is the offset of the register in struct pt_regs.
+ * If @offset is bigger than MAX_REG_OFFSET, this returns 0.
+ */
+static inline unsigned long regs_get_register(struct pt_regs *regs,
+						unsigned int offset)
+{
+	if (unlikely(offset > MAX_REG_OFFSET))
+		return 0;
+
+	return *(unsigned long *)((unsigned long)regs + offset);
+}
+
 #endif /* __ASSEMBLY__ */
 #endif /* __ASM_CSKY_PTRACE_H */
diff --git a/arch/csky/include/asm/thread_info.h b/arch/csky/include/asm/thread_info.h
index 0b546a5..442feda 100644
--- a/arch/csky/include/asm/thread_info.h
+++ b/arch/csky/include/asm/thread_info.h
@@ -57,6 +57,7 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_SYSCALL_TRACE	3	/* syscall trace active */
 #define TIF_SYSCALL_TRACEPOINT	4       /* syscall tracepoint instrumentation */
 #define TIF_SYSCALL_AUDIT	5	/* syscall auditing */
+#define TIF_UPROBE		6	/* uprobe breakpoint or singlestep */
 #define TIF_POLLING_NRFLAG	16	/* poll_idle() is TIF_NEED_RESCHED */
 #define TIF_MEMDIE		18      /* is terminating due to OOM killer */
 #define TIF_RESTORE_SIGMASK	20	/* restore signal mask in do_signal() */
@@ -68,6 +69,7 @@ static inline struct thread_info *current_thread_info(void)
 #define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
 #define _TIF_SYSCALL_TRACEPOINT	(1 << TIF_SYSCALL_TRACEPOINT)
 #define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
+#define _TIF_UPROBE		(1 << TIF_UPROBE)
 #define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
 #define _TIF_MEMDIE		(1 << TIF_MEMDIE)
 #define _TIF_RESTORE_SIGMASK	(1 << TIF_RESTORE_SIGMASK)
diff --git a/arch/csky/include/asm/uprobes.h b/arch/csky/include/asm/uprobes.h
new file mode 100644
index 0000000..600388e
--- /dev/null
+++ b/arch/csky/include/asm/uprobes.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __ASM_CSKY_UPROBES_H
+#define __ASM_CSKY_UPROBES_H
+
+#include <asm/probes.h>
+
+#define MAX_UINSN_BYTES		4
+
+#define UPROBE_SWBP_INSN	USR_BKPT
+#define UPROBE_SWBP_INSN_SIZE	2
+#define UPROBE_XOL_SLOT_BYTES	MAX_UINSN_BYTES
+
+typedef u32 uprobe_opcode_t;
+
+struct arch_uprobe_task {
+	unsigned long   saved_trap_no;
+};
+
+struct arch_uprobe {
+	union {
+		u8 insn[MAX_UINSN_BYTES];
+		u8 ixol[MAX_UINSN_BYTES];
+	};
+	struct arch_probe_insn api;
+	unsigned long insn_size;
+	bool simulate;
+};
+
+int uprobe_breakpoint_handler(struct pt_regs *regs);
+int uprobe_single_step_handler(struct pt_regs *regs);
+
+#endif /* __ASM_CSKY_UPROBES_H */
diff --git a/arch/csky/kernel/Makefile b/arch/csky/kernel/Makefile
index 071d659..fd6d9dc 100644
--- a/arch/csky/kernel/Makefile
+++ b/arch/csky/kernel/Makefile
@@ -4,6 +4,7 @@
 obj-y += entry.o atomic.o signal.o traps.o irq.o time.o vdso.o
 obj-y += power.o syscall.o syscall_table.o setup.o
 obj-y += process.o cpu-probe.o ptrace.o dumpstack.o
+obj-y += probes/
 
 obj-$(CONFIG_MODULES)			+= module.o
 obj-$(CONFIG_SMP)			+= smp.o
diff --git a/arch/csky/kernel/asm-offsets.c b/arch/csky/kernel/asm-offsets.c
index 9b48b1b..f8be348 100644
--- a/arch/csky/kernel/asm-offsets.c
+++ b/arch/csky/kernel/asm-offsets.c
@@ -72,6 +72,7 @@ int main(void)
 	DEFINE(PT_RLO,            offsetof(struct pt_regs, rlo));
 #endif
 	DEFINE(PT_USP,            offsetof(struct pt_regs, usp));
+	DEFINE(PT_FRAME_SIZE,     sizeof(struct pt_regs));
 
 	/* offsets into the irq_cpustat_t struct */
 	DEFINE(CPUSTAT_SOFTIRQ_PENDING, offsetof(irq_cpustat_t,
diff --git a/arch/csky/kernel/entry.S b/arch/csky/kernel/entry.S
index 0077063..36481953 100644
--- a/arch/csky/kernel/entry.S
+++ b/arch/csky/kernel/entry.S
@@ -128,7 +128,10 @@
 ENTRY(csky_systemcall)
 	SAVE_ALL TRAP0_SIZE
 	zero_fp
-
+#ifdef CONFIG_RSEQ_DEBUG
+	mov	a0, sp
+	jbsr	rseq_syscall
+#endif
 	psrset  ee, ie
 
 	lrw     r11, __NR_syscalls
@@ -218,10 +221,17 @@
 	andn	r9, r10
 
 	ldw	r12, (r9, TINFO_FLAGS)
-	andi	r12, (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED)
+	andi	r12, (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | _TIF_UPROBE)
 	cmpnei	r12, 0
 	bt	exit_work
 1:
+#ifdef CONFIG_TRACE_IRQFLAGS
+	ld	r10, (sp, LSAVE_PSR)
+	btsti	r10, 6
+	bf	2f
+	jbsr	trace_hardirqs_on
+2:
+#endif
 	RESTORE_ALL
 
 exit_work:
@@ -277,6 +287,10 @@
 	zero_fp
 	psrset	ee
 
+#ifdef CONFIG_TRACE_IRQFLAGS
+	jbsr	trace_hardirqs_off
+#endif
+
 #ifdef CONFIG_PREEMPTION
 	mov	r9, sp			/* Get current stack  pointer */
 	bmaski	r10, THREAD_SHIFT
diff --git a/arch/csky/kernel/ftrace.c b/arch/csky/kernel/ftrace.c
index 44f4880..44628e3 100644
--- a/arch/csky/kernel/ftrace.c
+++ b/arch/csky/kernel/ftrace.c
@@ -3,6 +3,7 @@
 
 #include <linux/ftrace.h>
 #include <linux/uaccess.h>
+#include <linux/stop_machine.h>
 #include <asm/cacheflush.h>
 
 #ifdef CONFIG_DYNAMIC_FTRACE
@@ -126,6 +127,9 @@ int ftrace_update_ftrace_func(ftrace_func_t func)
 {
 	int ret = ftrace_modify_code((unsigned long)&ftrace_call,
 				(unsigned long)func, true, true);
+	if (!ret)
+		ret = ftrace_modify_code((unsigned long)&ftrace_regs_call,
+				(unsigned long)func, true, true);
 	return ret;
 }
 
@@ -135,6 +139,14 @@ int __init ftrace_dyn_arch_init(void)
 }
 #endif /* CONFIG_DYNAMIC_FTRACE */
 
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
+int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
+		       unsigned long addr)
+{
+	return ftrace_modify_code(rec->ip, addr, true, true);
+}
+#endif
+
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 			   unsigned long frame_pointer)
@@ -190,5 +202,35 @@ int ftrace_disable_ftrace_graph_caller(void)
 #endif /* CONFIG_DYNAMIC_FTRACE */
 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */
 
+#ifndef CONFIG_CPU_HAS_ICACHE_INS
+struct ftrace_modify_param {
+	int command;
+	atomic_t cpu_count;
+};
+
+static int __ftrace_modify_code(void *data)
+{
+	struct ftrace_modify_param *param = data;
+
+	if (atomic_inc_return(&param->cpu_count) == 1) {
+		ftrace_modify_all_code(param->command);
+		atomic_inc(&param->cpu_count);
+	} else {
+		while (atomic_read(&param->cpu_count) <= num_online_cpus())
+			cpu_relax();
+		local_icache_inv_all(NULL);
+	}
+
+	return 0;
+}
+
+void arch_ftrace_update_code(int command)
+{
+	struct ftrace_modify_param param = { command, ATOMIC_INIT(0) };
+
+	stop_machine(__ftrace_modify_code, &param, cpu_online_mask);
+}
+#endif
+
 /* _mcount is defined in abi's mcount.S */
 EXPORT_SYMBOL(_mcount);
diff --git a/arch/csky/kernel/head.S b/arch/csky/kernel/head.S
index 61989f9..17ed9d2 100644
--- a/arch/csky/kernel/head.S
+++ b/arch/csky/kernel/head.S
@@ -21,6 +21,11 @@
 ENTRY(_start_smp_secondary)
 	SETUP_MMU
 
+	/* copy msa1 from CPU0 */
+	lrw     r6, secondary_msa1
+	ld.w	r6, (r6, 0)
+	mtcr	r6, cr<31, 15>
+
 	/* set stack point */
 	lrw     r6, secondary_stack
 	ld.w	r6, (r6, 0)
diff --git a/arch/csky/kernel/probes/Makefile b/arch/csky/kernel/probes/Makefile
new file mode 100644
index 0000000..1c7c6e6
--- /dev/null
+++ b/arch/csky/kernel/probes/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_KPROBES)		+= kprobes.o decode-insn.o simulate-insn.o
+obj-$(CONFIG_KPROBES)		+= kprobes_trampoline.o
+obj-$(CONFIG_KPROBES_ON_FTRACE)	+= ftrace.o
+obj-$(CONFIG_UPROBES)		+= uprobes.o decode-insn.o simulate-insn.o
+
+CFLAGS_REMOVE_simulate-insn.o = $(CC_FLAGS_FTRACE)
diff --git a/arch/csky/kernel/probes/decode-insn.c b/arch/csky/kernel/probes/decode-insn.c
new file mode 100644
index 0000000..bbc4edc
--- /dev/null
+++ b/arch/csky/kernel/probes/decode-insn.c
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <linux/kernel.h>
+#include <linux/kprobes.h>
+#include <linux/module.h>
+#include <linux/kallsyms.h>
+#include <asm/sections.h>
+
+#include "decode-insn.h"
+#include "simulate-insn.h"
+
+/* Return:
+ *   INSN_REJECTED     If instruction is one not allowed to kprobe,
+ *   INSN_GOOD_NO_SLOT If instruction is supported but doesn't use its slot.
+ */
+enum probe_insn __kprobes
+csky_probe_decode_insn(probe_opcode_t *addr, struct arch_probe_insn *api)
+{
+	probe_opcode_t insn = le32_to_cpu(*addr);
+
+	CSKY_INSN_SET_SIMULATE(br16,		insn);
+	CSKY_INSN_SET_SIMULATE(bt16,		insn);
+	CSKY_INSN_SET_SIMULATE(bf16,		insn);
+	CSKY_INSN_SET_SIMULATE(jmp16,		insn);
+	CSKY_INSN_SET_SIMULATE(jsr16,		insn);
+	CSKY_INSN_SET_SIMULATE(lrw16,		insn);
+	CSKY_INSN_SET_SIMULATE(pop16,		insn);
+
+	CSKY_INSN_SET_SIMULATE(br32,		insn);
+	CSKY_INSN_SET_SIMULATE(bt32,		insn);
+	CSKY_INSN_SET_SIMULATE(bf32,		insn);
+	CSKY_INSN_SET_SIMULATE(jmp32,		insn);
+	CSKY_INSN_SET_SIMULATE(jsr32,		insn);
+	CSKY_INSN_SET_SIMULATE(lrw32,		insn);
+	CSKY_INSN_SET_SIMULATE(pop32,		insn);
+
+	CSKY_INSN_SET_SIMULATE(bez32,		insn);
+	CSKY_INSN_SET_SIMULATE(bnez32,		insn);
+	CSKY_INSN_SET_SIMULATE(bnezad32,	insn);
+	CSKY_INSN_SET_SIMULATE(bhsz32,		insn);
+	CSKY_INSN_SET_SIMULATE(bhz32,		insn);
+	CSKY_INSN_SET_SIMULATE(blsz32,		insn);
+	CSKY_INSN_SET_SIMULATE(blz32,		insn);
+	CSKY_INSN_SET_SIMULATE(bsr32,		insn);
+	CSKY_INSN_SET_SIMULATE(jmpi32,		insn);
+	CSKY_INSN_SET_SIMULATE(jsri32,		insn);
+
+	return INSN_GOOD;
+}
diff --git a/arch/csky/kernel/probes/decode-insn.h b/arch/csky/kernel/probes/decode-insn.h
new file mode 100644
index 0000000..9c4ad48
--- /dev/null
+++ b/arch/csky/kernel/probes/decode-insn.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef __CSKY_KERNEL_KPROBES_DECODE_INSN_H
+#define __CSKY_KERNEL_KPROBES_DECODE_INSN_H
+
+#include <asm/sections.h>
+#include <asm/kprobes.h>
+
+enum probe_insn {
+	INSN_REJECTED,
+	INSN_GOOD_NO_SLOT,
+	INSN_GOOD,
+};
+
+#define is_insn32(insn) ((insn & 0xc000) == 0xc000)
+
+enum probe_insn __kprobes
+csky_probe_decode_insn(probe_opcode_t *addr, struct arch_probe_insn *asi);
+
+#endif /* __CSKY_KERNEL_KPROBES_DECODE_INSN_H */
diff --git a/arch/csky/kernel/probes/ftrace.c b/arch/csky/kernel/probes/ftrace.c
new file mode 100644
index 0000000..5264763
--- /dev/null
+++ b/arch/csky/kernel/probes/ftrace.c
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/kprobes.h>
+
+int arch_check_ftrace_location(struct kprobe *p)
+{
+	if (ftrace_location((unsigned long)p->addr))
+		p->flags |= KPROBE_FLAG_FTRACE;
+	return 0;
+}
+
+/* Ftrace callback handler for kprobes -- called under preepmt disabed */
+void kprobe_ftrace_handler(unsigned long ip, unsigned long parent_ip,
+			   struct ftrace_ops *ops, struct pt_regs *regs)
+{
+	bool lr_saver = false;
+	struct kprobe *p;
+	struct kprobe_ctlblk *kcb;
+
+	/* Preempt is disabled by ftrace */
+	p = get_kprobe((kprobe_opcode_t *)ip);
+	if (!p) {
+		p = get_kprobe((kprobe_opcode_t *)(ip - MCOUNT_INSN_SIZE));
+		if (unlikely(!p) || kprobe_disabled(p))
+			return;
+		lr_saver = true;
+	}
+
+	kcb = get_kprobe_ctlblk();
+	if (kprobe_running()) {
+		kprobes_inc_nmissed_count(p);
+	} else {
+		unsigned long orig_ip = instruction_pointer(regs);
+
+		if (lr_saver)
+			ip -= MCOUNT_INSN_SIZE;
+		instruction_pointer_set(regs, ip);
+		__this_cpu_write(current_kprobe, p);
+		kcb->kprobe_status = KPROBE_HIT_ACTIVE;
+		if (!p->pre_handler || !p->pre_handler(p, regs)) {
+			/*
+			 * Emulate singlestep (and also recover regs->pc)
+			 * as if there is a nop
+			 */
+			instruction_pointer_set(regs,
+				(unsigned long)p->addr + MCOUNT_INSN_SIZE);
+			if (unlikely(p->post_handler)) {
+				kcb->kprobe_status = KPROBE_HIT_SSDONE;
+				p->post_handler(p, regs, 0);
+			}
+			instruction_pointer_set(regs, orig_ip);
+		}
+		/*
+		 * If pre_handler returns !0, it changes regs->pc. We have to
+		 * skip emulating post_handler.
+		 */
+		__this_cpu_write(current_kprobe, NULL);
+	}
+}
+NOKPROBE_SYMBOL(kprobe_ftrace_handler);
+
+int arch_prepare_kprobe_ftrace(struct kprobe *p)
+{
+	p->ainsn.api.insn = NULL;
+	return 0;
+}
diff --git a/arch/csky/kernel/probes/kprobes.c b/arch/csky/kernel/probes/kprobes.c
new file mode 100644
index 0000000..f0f733b
--- /dev/null
+++ b/arch/csky/kernel/probes/kprobes.c
@@ -0,0 +1,499 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <linux/kprobes.h>
+#include <linux/extable.h>
+#include <linux/slab.h>
+#include <linux/stop_machine.h>
+#include <asm/ptrace.h>
+#include <linux/uaccess.h>
+#include <asm/sections.h>
+#include <asm/cacheflush.h>
+
+#include "decode-insn.h"
+
+DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
+DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
+
+static void __kprobes
+post_kprobe_handler(struct kprobe_ctlblk *, struct pt_regs *);
+
+struct csky_insn_patch {
+	kprobe_opcode_t	*addr;
+	u32		opcode;
+	atomic_t	cpu_count;
+};
+
+static int __kprobes patch_text_cb(void *priv)
+{
+	struct csky_insn_patch *param = priv;
+	unsigned int addr = (unsigned int)param->addr;
+
+	if (atomic_inc_return(&param->cpu_count) == 1) {
+		*(u16 *) addr = cpu_to_le16(param->opcode);
+		dcache_wb_range(addr, addr + 2);
+		atomic_inc(&param->cpu_count);
+	} else {
+		while (atomic_read(&param->cpu_count) <= num_online_cpus())
+			cpu_relax();
+	}
+
+	icache_inv_range(addr, addr + 2);
+
+	return 0;
+}
+
+static int __kprobes patch_text(kprobe_opcode_t *addr, u32 opcode)
+{
+	struct csky_insn_patch param = { addr, opcode, ATOMIC_INIT(0) };
+
+	return stop_machine_cpuslocked(patch_text_cb, &param, cpu_online_mask);
+}
+
+static void __kprobes arch_prepare_ss_slot(struct kprobe *p)
+{
+	unsigned long offset = is_insn32(p->opcode) ? 4 : 2;
+
+	p->ainsn.api.restore = (unsigned long)p->addr + offset;
+
+	patch_text(p->ainsn.api.insn, p->opcode);
+}
+
+static void __kprobes arch_prepare_simulate(struct kprobe *p)
+{
+	p->ainsn.api.restore = 0;
+}
+
+static void __kprobes arch_simulate_insn(struct kprobe *p, struct pt_regs *regs)
+{
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+	if (p->ainsn.api.handler)
+		p->ainsn.api.handler((u32)p->opcode, (long)p->addr, regs);
+
+	post_kprobe_handler(kcb, regs);
+}
+
+int __kprobes arch_prepare_kprobe(struct kprobe *p)
+{
+	unsigned long probe_addr = (unsigned long)p->addr;
+
+	if (probe_addr & 0x1) {
+		pr_warn("Address not aligned.\n");
+		return -EINVAL;
+	}
+
+	/* copy instruction */
+	p->opcode = le32_to_cpu(*p->addr);
+
+	/* decode instruction */
+	switch (csky_probe_decode_insn(p->addr, &p->ainsn.api)) {
+	case INSN_REJECTED:	/* insn not supported */
+		return -EINVAL;
+
+	case INSN_GOOD_NO_SLOT:	/* insn need simulation */
+		p->ainsn.api.insn = NULL;
+		break;
+
+	case INSN_GOOD:	/* instruction uses slot */
+		p->ainsn.api.insn = get_insn_slot();
+		if (!p->ainsn.api.insn)
+			return -ENOMEM;
+		break;
+	}
+
+	/* prepare the instruction */
+	if (p->ainsn.api.insn)
+		arch_prepare_ss_slot(p);
+	else
+		arch_prepare_simulate(p);
+
+	return 0;
+}
+
+/* install breakpoint in text */
+void __kprobes arch_arm_kprobe(struct kprobe *p)
+{
+	patch_text(p->addr, USR_BKPT);
+}
+
+/* remove breakpoint from text */
+void __kprobes arch_disarm_kprobe(struct kprobe *p)
+{
+	patch_text(p->addr, p->opcode);
+}
+
+void __kprobes arch_remove_kprobe(struct kprobe *p)
+{
+}
+
+static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb)
+{
+	kcb->prev_kprobe.kp = kprobe_running();
+	kcb->prev_kprobe.status = kcb->kprobe_status;
+}
+
+static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb)
+{
+	__this_cpu_write(current_kprobe, kcb->prev_kprobe.kp);
+	kcb->kprobe_status = kcb->prev_kprobe.status;
+}
+
+static void __kprobes set_current_kprobe(struct kprobe *p)
+{
+	__this_cpu_write(current_kprobe, p);
+}
+
+/*
+ * Interrupts need to be disabled before single-step mode is set, and not
+ * reenabled until after single-step mode ends.
+ * Without disabling interrupt on local CPU, there is a chance of
+ * interrupt occurrence in the period of exception return and  start of
+ * out-of-line single-step, that result in wrongly single stepping
+ * into the interrupt handler.
+ */
+static void __kprobes kprobes_save_local_irqflag(struct kprobe_ctlblk *kcb,
+						struct pt_regs *regs)
+{
+	kcb->saved_sr = regs->sr;
+	regs->sr &= ~BIT(6);
+}
+
+static void __kprobes kprobes_restore_local_irqflag(struct kprobe_ctlblk *kcb,
+						struct pt_regs *regs)
+{
+	regs->sr = kcb->saved_sr;
+}
+
+static void __kprobes
+set_ss_context(struct kprobe_ctlblk *kcb, unsigned long addr, struct kprobe *p)
+{
+	unsigned long offset = is_insn32(p->opcode) ? 4 : 2;
+
+	kcb->ss_ctx.ss_pending = true;
+	kcb->ss_ctx.match_addr = addr + offset;
+}
+
+static void __kprobes clear_ss_context(struct kprobe_ctlblk *kcb)
+{
+	kcb->ss_ctx.ss_pending = false;
+	kcb->ss_ctx.match_addr = 0;
+}
+
+#define TRACE_MODE_SI		BIT(14)
+#define TRACE_MODE_MASK		~(0x3 << 14)
+#define TRACE_MODE_RUN		0
+
+static void __kprobes setup_singlestep(struct kprobe *p,
+				       struct pt_regs *regs,
+				       struct kprobe_ctlblk *kcb, int reenter)
+{
+	unsigned long slot;
+
+	if (reenter) {
+		save_previous_kprobe(kcb);
+		set_current_kprobe(p);
+		kcb->kprobe_status = KPROBE_REENTER;
+	} else {
+		kcb->kprobe_status = KPROBE_HIT_SS;
+	}
+
+	if (p->ainsn.api.insn) {
+		/* prepare for single stepping */
+		slot = (unsigned long)p->ainsn.api.insn;
+
+		set_ss_context(kcb, slot, p);	/* mark pending ss */
+
+		/* IRQs and single stepping do not mix well. */
+		kprobes_save_local_irqflag(kcb, regs);
+		regs->sr = (regs->sr & TRACE_MODE_MASK) | TRACE_MODE_SI;
+		instruction_pointer_set(regs, slot);
+	} else {
+		/* insn simulation */
+		arch_simulate_insn(p, regs);
+	}
+}
+
+static int __kprobes reenter_kprobe(struct kprobe *p,
+				    struct pt_regs *regs,
+				    struct kprobe_ctlblk *kcb)
+{
+	switch (kcb->kprobe_status) {
+	case KPROBE_HIT_SSDONE:
+	case KPROBE_HIT_ACTIVE:
+		kprobes_inc_nmissed_count(p);
+		setup_singlestep(p, regs, kcb, 1);
+		break;
+	case KPROBE_HIT_SS:
+	case KPROBE_REENTER:
+		pr_warn("Unrecoverable kprobe detected.\n");
+		dump_kprobe(p);
+		BUG();
+		break;
+	default:
+		WARN_ON(1);
+		return 0;
+	}
+
+	return 1;
+}
+
+static void __kprobes
+post_kprobe_handler(struct kprobe_ctlblk *kcb, struct pt_regs *regs)
+{
+	struct kprobe *cur = kprobe_running();
+
+	if (!cur)
+		return;
+
+	/* return addr restore if non-branching insn */
+	if (cur->ainsn.api.restore != 0)
+		regs->pc = cur->ainsn.api.restore;
+
+	/* restore back original saved kprobe variables and continue */
+	if (kcb->kprobe_status == KPROBE_REENTER) {
+		restore_previous_kprobe(kcb);
+		return;
+	}
+
+	/* call post handler */
+	kcb->kprobe_status = KPROBE_HIT_SSDONE;
+	if (cur->post_handler)	{
+		/* post_handler can hit breakpoint and single step
+		 * again, so we enable D-flag for recursive exception.
+		 */
+		cur->post_handler(cur, regs, 0);
+	}
+
+	reset_current_kprobe();
+}
+
+int __kprobes kprobe_fault_handler(struct pt_regs *regs, unsigned int trapnr)
+{
+	struct kprobe *cur = kprobe_running();
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+	switch (kcb->kprobe_status) {
+	case KPROBE_HIT_SS:
+	case KPROBE_REENTER:
+		/*
+		 * We are here because the instruction being single
+		 * stepped caused a page fault. We reset the current
+		 * kprobe and the ip points back to the probe address
+		 * and allow the page fault handler to continue as a
+		 * normal page fault.
+		 */
+		regs->pc = (unsigned long) cur->addr;
+		if (!instruction_pointer(regs))
+			BUG();
+
+		if (kcb->kprobe_status == KPROBE_REENTER)
+			restore_previous_kprobe(kcb);
+		else
+			reset_current_kprobe();
+
+		break;
+	case KPROBE_HIT_ACTIVE:
+	case KPROBE_HIT_SSDONE:
+		/*
+		 * We increment the nmissed count for accounting,
+		 * we can also use npre/npostfault count for accounting
+		 * these specific fault cases.
+		 */
+		kprobes_inc_nmissed_count(cur);
+
+		/*
+		 * We come here because instructions in the pre/post
+		 * handler caused the page_fault, this could happen
+		 * if handler tries to access user space by
+		 * copy_from_user(), get_user() etc. Let the
+		 * user-specified handler try to fix it first.
+		 */
+		if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr))
+			return 1;
+
+		/*
+		 * In case the user-specified fault handler returned
+		 * zero, try to fix up.
+		 */
+		if (fixup_exception(regs))
+			return 1;
+	}
+	return 0;
+}
+
+int __kprobes
+kprobe_breakpoint_handler(struct pt_regs *regs)
+{
+	struct kprobe *p, *cur_kprobe;
+	struct kprobe_ctlblk *kcb;
+	unsigned long addr = instruction_pointer(regs);
+
+	kcb = get_kprobe_ctlblk();
+	cur_kprobe = kprobe_running();
+
+	p = get_kprobe((kprobe_opcode_t *) addr);
+
+	if (p) {
+		if (cur_kprobe) {
+			if (reenter_kprobe(p, regs, kcb))
+				return 1;
+		} else {
+			/* Probe hit */
+			set_current_kprobe(p);
+			kcb->kprobe_status = KPROBE_HIT_ACTIVE;
+
+			/*
+			 * If we have no pre-handler or it returned 0, we
+			 * continue with normal processing.  If we have a
+			 * pre-handler and it returned non-zero, it will
+			 * modify the execution path and no need to single
+			 * stepping. Let's just reset current kprobe and exit.
+			 *
+			 * pre_handler can hit a breakpoint and can step thru
+			 * before return.
+			 */
+			if (!p->pre_handler || !p->pre_handler(p, regs))
+				setup_singlestep(p, regs, kcb, 0);
+			else
+				reset_current_kprobe();
+		}
+		return 1;
+	}
+
+	/*
+	 * The breakpoint instruction was removed right
+	 * after we hit it.  Another cpu has removed
+	 * either a probepoint or a debugger breakpoint
+	 * at this address.  In either case, no further
+	 * handling of this interrupt is appropriate.
+	 * Return back to original instruction, and continue.
+	 */
+	return 0;
+}
+
+int __kprobes
+kprobe_single_step_handler(struct pt_regs *regs)
+{
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+	if ((kcb->ss_ctx.ss_pending)
+	    && (kcb->ss_ctx.match_addr == instruction_pointer(regs))) {
+		clear_ss_context(kcb);	/* clear pending ss */
+
+		kprobes_restore_local_irqflag(kcb, regs);
+		regs->sr = (regs->sr & TRACE_MODE_MASK) | TRACE_MODE_RUN;
+
+		post_kprobe_handler(kcb, regs);
+		return 1;
+	}
+	return 0;
+}
+
+/*
+ * Provide a blacklist of symbols identifying ranges which cannot be kprobed.
+ * This blacklist is exposed to userspace via debugfs (kprobes/blacklist).
+ */
+int __init arch_populate_kprobe_blacklist(void)
+{
+	int ret;
+
+	ret = kprobe_add_area_blacklist((unsigned long)__irqentry_text_start,
+					(unsigned long)__irqentry_text_end);
+	return ret;
+}
+
+void __kprobes __used *trampoline_probe_handler(struct pt_regs *regs)
+{
+	struct kretprobe_instance *ri = NULL;
+	struct hlist_head *head, empty_rp;
+	struct hlist_node *tmp;
+	unsigned long flags, orig_ret_address = 0;
+	unsigned long trampoline_address =
+		(unsigned long)&kretprobe_trampoline;
+	kprobe_opcode_t *correct_ret_addr = NULL;
+
+	INIT_HLIST_HEAD(&empty_rp);
+	kretprobe_hash_lock(current, &head, &flags);
+
+	/*
+	 * It is possible to have multiple instances associated with a given
+	 * task either because multiple functions in the call path have
+	 * return probes installed on them, and/or more than one
+	 * return probe was registered for a target function.
+	 *
+	 * We can handle this because:
+	 *     - instances are always pushed into the head of the list
+	 *     - when multiple return probes are registered for the same
+	 *	 function, the (chronologically) first instance's ret_addr
+	 *	 will be the real return address, and all the rest will
+	 *	 point to kretprobe_trampoline.
+	 */
+	hlist_for_each_entry_safe(ri, tmp, head, hlist) {
+		if (ri->task != current)
+			/* another task is sharing our hash bucket */
+			continue;
+
+		orig_ret_address = (unsigned long)ri->ret_addr;
+
+		if (orig_ret_address != trampoline_address)
+			/*
+			 * This is the real return address. Any other
+			 * instances associated with this task are for
+			 * other calls deeper on the call stack
+			 */
+			break;
+	}
+
+	kretprobe_assert(ri, orig_ret_address, trampoline_address);
+
+	correct_ret_addr = ri->ret_addr;
+	hlist_for_each_entry_safe(ri, tmp, head, hlist) {
+		if (ri->task != current)
+			/* another task is sharing our hash bucket */
+			continue;
+
+		orig_ret_address = (unsigned long)ri->ret_addr;
+		if (ri->rp && ri->rp->handler) {
+			__this_cpu_write(current_kprobe, &ri->rp->kp);
+			get_kprobe_ctlblk()->kprobe_status = KPROBE_HIT_ACTIVE;
+			ri->ret_addr = correct_ret_addr;
+			ri->rp->handler(ri, regs);
+			__this_cpu_write(current_kprobe, NULL);
+		}
+
+		recycle_rp_inst(ri, &empty_rp);
+
+		if (orig_ret_address != trampoline_address)
+			/*
+			 * This is the real return address. Any other
+			 * instances associated with this task are for
+			 * other calls deeper on the call stack
+			 */
+			break;
+	}
+
+	kretprobe_hash_unlock(current, &flags);
+
+	hlist_for_each_entry_safe(ri, tmp, &empty_rp, hlist) {
+		hlist_del(&ri->hlist);
+		kfree(ri);
+	}
+	return (void *)orig_ret_address;
+}
+
+void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
+				      struct pt_regs *regs)
+{
+	ri->ret_addr = (kprobe_opcode_t *)regs->lr;
+	regs->lr = (unsigned long) &kretprobe_trampoline;
+}
+
+int __kprobes arch_trampoline_kprobe(struct kprobe *p)
+{
+	return 0;
+}
+
+int __init arch_init_kprobes(void)
+{
+	return 0;
+}
diff --git a/arch/csky/kernel/probes/kprobes_trampoline.S b/arch/csky/kernel/probes/kprobes_trampoline.S
new file mode 100644
index 0000000..b1fe3af
--- /dev/null
+++ b/arch/csky/kernel/probes/kprobes_trampoline.S
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#include <linux/linkage.h>
+
+#include <abi/entry.h>
+
+ENTRY(kretprobe_trampoline)
+	SAVE_REGS_FTRACE
+
+	mov	a0, sp /* pt_regs */
+
+	jbsr	trampoline_probe_handler
+
+	/* use the result as the return-address */
+	mov	lr, a0
+
+	RESTORE_REGS_FTRACE
+	rts
+ENDPROC(kretprobe_trampoline)
diff --git a/arch/csky/kernel/probes/simulate-insn.c b/arch/csky/kernel/probes/simulate-insn.c
new file mode 100644
index 0000000..4e464fe
--- /dev/null
+++ b/arch/csky/kernel/probes/simulate-insn.c
@@ -0,0 +1,398 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <linux/bitops.h>
+#include <linux/kernel.h>
+#include <linux/kprobes.h>
+
+#include "decode-insn.h"
+#include "simulate-insn.h"
+
+static inline bool csky_insn_reg_get_val(struct pt_regs *regs,
+					 unsigned long index,
+					 unsigned long *ptr)
+{
+	if (index < 14)
+		*ptr = *(&regs->a0 + index);
+
+	if (index > 15 && index < 31)
+		*ptr = *(&regs->exregs[0] + index - 16);
+
+	switch (index) {
+	case 14:
+		*ptr = regs->usp;
+		break;
+	case 15:
+		*ptr = regs->lr;
+		break;
+	case 31:
+		*ptr = regs->tls;
+		break;
+	default:
+		goto fail;
+	}
+
+	return true;
+fail:
+	return false;
+}
+
+static inline bool csky_insn_reg_set_val(struct pt_regs *regs,
+					 unsigned long index,
+					 unsigned long val)
+{
+	if (index < 14)
+		*(&regs->a0 + index) = val;
+
+	if (index > 15 && index < 31)
+		*(&regs->exregs[0] + index - 16) = val;
+
+	switch (index) {
+	case 14:
+		regs->usp = val;
+		break;
+	case 15:
+		regs->lr = val;
+		break;
+	case 31:
+		regs->tls = val;
+		break;
+	default:
+		goto fail;
+	}
+
+	return true;
+fail:
+	return false;
+}
+
+void __kprobes
+simulate_br16(u32 opcode, long addr, struct pt_regs *regs)
+{
+	instruction_pointer_set(regs,
+		addr + sign_extend32((opcode & 0x3ff) << 1, 9));
+}
+
+void __kprobes
+simulate_br32(u32 opcode, long addr, struct pt_regs *regs)
+{
+	instruction_pointer_set(regs,
+		addr + sign_extend32((opcode & 0xffff0000) >> 15, 15));
+}
+
+void __kprobes
+simulate_bt16(u32 opcode, long addr, struct pt_regs *regs)
+{
+	if (regs->sr & 1)
+		instruction_pointer_set(regs,
+			addr + sign_extend32((opcode & 0x3ff) << 1, 9));
+	else
+		instruction_pointer_set(regs, addr + 2);
+}
+
+void __kprobes
+simulate_bt32(u32 opcode, long addr, struct pt_regs *regs)
+{
+	if (regs->sr & 1)
+		instruction_pointer_set(regs,
+			addr + sign_extend32((opcode & 0xffff0000) >> 15, 15));
+	else
+		instruction_pointer_set(regs, addr + 4);
+}
+
+void __kprobes
+simulate_bf16(u32 opcode, long addr, struct pt_regs *regs)
+{
+	if (!(regs->sr & 1))
+		instruction_pointer_set(regs,
+			addr + sign_extend32((opcode & 0x3ff) << 1, 9));
+	else
+		instruction_pointer_set(regs, addr + 2);
+}
+
+void __kprobes
+simulate_bf32(u32 opcode, long addr, struct pt_regs *regs)
+{
+	if (!(regs->sr & 1))
+		instruction_pointer_set(regs,
+			addr + sign_extend32((opcode & 0xffff0000) >> 15, 15));
+	else
+		instruction_pointer_set(regs, addr + 4);
+}
+
+void __kprobes
+simulate_jmp16(u32 opcode, long addr, struct pt_regs *regs)
+{
+	unsigned long tmp = (opcode >> 2) & 0xf;
+
+	csky_insn_reg_get_val(regs, tmp, &tmp);
+
+	instruction_pointer_set(regs, tmp & 0xfffffffe);
+}
+
+void __kprobes
+simulate_jmp32(u32 opcode, long addr, struct pt_regs *regs)
+{
+	unsigned long tmp = opcode & 0x1f;
+
+	csky_insn_reg_get_val(regs, tmp, &tmp);
+
+	instruction_pointer_set(regs, tmp & 0xfffffffe);
+}
+
+void __kprobes
+simulate_jsr16(u32 opcode, long addr, struct pt_regs *regs)
+{
+	unsigned long tmp = (opcode >> 2) & 0xf;
+
+	csky_insn_reg_get_val(regs, tmp, &tmp);
+
+	regs->lr = addr + 2;
+
+	instruction_pointer_set(regs, tmp & 0xfffffffe);
+}
+
+void __kprobes
+simulate_jsr32(u32 opcode, long addr, struct pt_regs *regs)
+{
+	unsigned long tmp = opcode & 0x1f;
+
+	csky_insn_reg_get_val(regs, tmp, &tmp);
+
+	regs->lr = addr + 4;
+
+	instruction_pointer_set(regs, tmp & 0xfffffffe);
+}
+
+void __kprobes
+simulate_lrw16(u32 opcode, long addr, struct pt_regs *regs)
+{
+	unsigned long val;
+	unsigned long tmp = (opcode & 0x300) >> 3;
+	unsigned long offset = ((opcode & 0x1f) | tmp) << 2;
+
+	tmp = (opcode & 0xe0) >> 5;
+
+	val = *(unsigned int *)(instruction_pointer(regs) + offset);
+
+	csky_insn_reg_set_val(regs, tmp, val);
+}
+
+void __kprobes
+simulate_lrw32(u32 opcode, long addr, struct pt_regs *regs)
+{
+	unsigned long val;
+	unsigned long offset = (opcode & 0xffff0000) >> 14;
+	unsigned long tmp = opcode & 0x0000001f;
+
+	val = *(unsigned int *)
+		((instruction_pointer(regs) + offset) & 0xfffffffc);
+
+	csky_insn_reg_set_val(regs, tmp, val);
+}
+
+void __kprobes
+simulate_pop16(u32 opcode, long addr, struct pt_regs *regs)
+{
+	unsigned long *tmp = (unsigned long *)regs->usp;
+	int i;
+
+	for (i = 0; i < (opcode & 0xf); i++) {
+		csky_insn_reg_set_val(regs, i + 4, *tmp);
+		tmp += 1;
+	}
+
+	if (opcode & 0x10) {
+		csky_insn_reg_set_val(regs, 15, *tmp);
+		tmp += 1;
+	}
+
+	regs->usp = (unsigned long)tmp;
+
+	instruction_pointer_set(regs, regs->lr);
+}
+
+void __kprobes
+simulate_pop32(u32 opcode, long addr, struct pt_regs *regs)
+{
+	unsigned long *tmp = (unsigned long *)regs->usp;
+	int i;
+
+	for (i = 0; i < ((opcode & 0xf0000) >> 16); i++) {
+		csky_insn_reg_set_val(regs, i + 4, *tmp);
+		tmp += 1;
+	}
+
+	if (opcode & 0x100000) {
+		csky_insn_reg_set_val(regs, 15, *tmp);
+		tmp += 1;
+	}
+
+	for (i = 0; i < ((opcode & 0xe00000) >> 21); i++) {
+		csky_insn_reg_set_val(regs, i + 16, *tmp);
+		tmp += 1;
+	}
+
+	if (opcode & 0x1000000) {
+		csky_insn_reg_set_val(regs, 29, *tmp);
+		tmp += 1;
+	}
+
+	regs->usp = (unsigned long)tmp;
+
+	instruction_pointer_set(regs, regs->lr);
+}
+
+void __kprobes
+simulate_bez32(u32 opcode, long addr, struct pt_regs *regs)
+{
+	unsigned long tmp = opcode & 0x1f;
+
+	csky_insn_reg_get_val(regs, tmp, &tmp);
+
+	if (tmp == 0) {
+		instruction_pointer_set(regs,
+			addr + sign_extend32((opcode & 0xffff0000) >> 15, 15));
+	} else
+		instruction_pointer_set(regs, addr + 4);
+}
+
+void __kprobes
+simulate_bnez32(u32 opcode, long addr, struct pt_regs *regs)
+{
+	unsigned long tmp = opcode & 0x1f;
+
+	csky_insn_reg_get_val(regs, tmp, &tmp);
+
+	if (tmp != 0) {
+		instruction_pointer_set(regs,
+			addr + sign_extend32((opcode & 0xffff0000) >> 15, 15));
+	} else
+		instruction_pointer_set(regs, addr + 4);
+}
+
+void __kprobes
+simulate_bnezad32(u32 opcode, long addr, struct pt_regs *regs)
+{
+	unsigned long tmp = opcode & 0x1f;
+	unsigned long val;
+
+	csky_insn_reg_get_val(regs, tmp, &val);
+
+	val -= 1;
+
+	if (val > 0) {
+		instruction_pointer_set(regs,
+			addr + sign_extend32((opcode & 0xffff0000) >> 15, 15));
+	} else
+		instruction_pointer_set(regs, addr + 4);
+
+	csky_insn_reg_set_val(regs, tmp, val);
+}
+
+void __kprobes
+simulate_bhsz32(u32 opcode, long addr, struct pt_regs *regs)
+{
+	unsigned long tmp = opcode & 0x1f;
+	unsigned long val;
+
+	csky_insn_reg_get_val(regs, tmp, &val);
+
+	if (val >= 0) {
+		instruction_pointer_set(regs,
+			addr + sign_extend32((opcode & 0xffff0000) >> 15, 15));
+	} else
+		instruction_pointer_set(regs, addr + 4);
+
+	csky_insn_reg_set_val(regs, tmp, val);
+}
+
+void __kprobes
+simulate_bhz32(u32 opcode, long addr, struct pt_regs *regs)
+{
+	unsigned long tmp = opcode & 0x1f;
+	unsigned long val;
+
+	csky_insn_reg_get_val(regs, tmp, &val);
+
+	if (val > 0) {
+		instruction_pointer_set(regs,
+			addr + sign_extend32((opcode & 0xffff0000) >> 15, 15));
+	} else
+		instruction_pointer_set(regs, addr + 4);
+
+	csky_insn_reg_set_val(regs, tmp, val);
+}
+
+void __kprobes
+simulate_blsz32(u32 opcode, long addr, struct pt_regs *regs)
+{
+	unsigned long tmp = opcode & 0x1f;
+	unsigned long val;
+
+	csky_insn_reg_get_val(regs, tmp, &val);
+
+	if (val <= 0) {
+		instruction_pointer_set(regs,
+			addr + sign_extend32((opcode & 0xffff0000) >> 15, 15));
+	} else
+		instruction_pointer_set(regs, addr + 4);
+
+	csky_insn_reg_set_val(regs, tmp, val);
+}
+
+void __kprobes
+simulate_blz32(u32 opcode, long addr, struct pt_regs *regs)
+{
+	unsigned long tmp = opcode & 0x1f;
+	unsigned long val;
+
+	csky_insn_reg_get_val(regs, tmp, &val);
+
+	if (val < 0) {
+		instruction_pointer_set(regs,
+			addr + sign_extend32((opcode & 0xffff0000) >> 15, 15));
+	} else
+		instruction_pointer_set(regs, addr + 4);
+
+	csky_insn_reg_set_val(regs, tmp, val);
+}
+
+void __kprobes
+simulate_bsr32(u32 opcode, long addr, struct pt_regs *regs)
+{
+	unsigned long tmp;
+
+	tmp = (opcode & 0xffff) << 16;
+	tmp |= (opcode & 0xffff0000) >> 16;
+
+	instruction_pointer_set(regs,
+		addr + sign_extend32((tmp & 0x3ffffff) << 1, 15));
+
+	regs->lr = addr + 4;
+}
+
+void __kprobes
+simulate_jmpi32(u32 opcode, long addr, struct pt_regs *regs)
+{
+	unsigned long val;
+	unsigned long offset = ((opcode & 0xffff0000) >> 14);
+
+	val = *(unsigned int *)
+		((instruction_pointer(regs) + offset) & 0xfffffffc);
+
+	instruction_pointer_set(regs, val);
+}
+
+void __kprobes
+simulate_jsri32(u32 opcode, long addr, struct pt_regs *regs)
+{
+	unsigned long val;
+	unsigned long offset = ((opcode & 0xffff0000) >> 14);
+
+	val = *(unsigned int *)
+		((instruction_pointer(regs) + offset) & 0xfffffffc);
+
+	regs->lr = addr + 4;
+
+	instruction_pointer_set(regs, val);
+}
diff --git a/arch/csky/kernel/probes/simulate-insn.h b/arch/csky/kernel/probes/simulate-insn.h
new file mode 100644
index 0000000..ba4cb7e
--- /dev/null
+++ b/arch/csky/kernel/probes/simulate-insn.h
@@ -0,0 +1,49 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef __CSKY_KERNEL_PROBES_SIMULATE_INSN_H
+#define __CSKY_KERNEL_PROBES_SIMULATE_INSN_H
+
+#define __CSKY_INSN_FUNCS(name, mask, val)				\
+static __always_inline bool csky_insn_is_##name(probe_opcode_t code)	\
+{									\
+	BUILD_BUG_ON(~(mask) & (val));					\
+	return (code & (mask)) == (val);				\
+}									\
+void simulate_##name(u32 opcode, long addr, struct pt_regs *regs);
+
+#define CSKY_INSN_SET_SIMULATE(name, code)				\
+	do {								\
+		if (csky_insn_is_##name(code)) {			\
+			api->handler = simulate_##name;			\
+			return INSN_GOOD_NO_SLOT;			\
+		}							\
+	} while (0)
+
+__CSKY_INSN_FUNCS(br16,		0xfc00, 0x0400)
+__CSKY_INSN_FUNCS(bt16,		0xfc00, 0x0800)
+__CSKY_INSN_FUNCS(bf16,		0xfc00, 0x0c00)
+__CSKY_INSN_FUNCS(jmp16,	0xffc3, 0x7800)
+__CSKY_INSN_FUNCS(jsr16,	0xffc3, 0x7801)
+__CSKY_INSN_FUNCS(lrw16,	0xfc00, 0x1000)
+__CSKY_INSN_FUNCS(pop16,	0xffe0, 0x1480)
+
+__CSKY_INSN_FUNCS(br32,		0x0000ffff, 0x0000e800)
+__CSKY_INSN_FUNCS(bt32,		0x0000ffff, 0x0000e860)
+__CSKY_INSN_FUNCS(bf32,		0x0000ffff, 0x0000e840)
+__CSKY_INSN_FUNCS(jmp32,	0xffffffe0, 0x0000e8c0)
+__CSKY_INSN_FUNCS(jsr32,	0xffffffe0, 0x0000e8e0)
+__CSKY_INSN_FUNCS(lrw32,	0x0000ffe0, 0x0000ea80)
+__CSKY_INSN_FUNCS(pop32,	0xfe00ffff, 0x0000ebc0)
+
+__CSKY_INSN_FUNCS(bez32,	0x0000ffe0, 0x0000e900)
+__CSKY_INSN_FUNCS(bnez32,	0x0000ffe0, 0x0000e920)
+__CSKY_INSN_FUNCS(bnezad32,	0x0000ffe0, 0x0000e820)
+__CSKY_INSN_FUNCS(bhsz32,	0x0000ffe0, 0x0000e9a0)
+__CSKY_INSN_FUNCS(bhz32,	0x0000ffe0, 0x0000e940)
+__CSKY_INSN_FUNCS(blsz32,	0x0000ffe0, 0x0000e960)
+__CSKY_INSN_FUNCS(blz32,	0x0000ffe0, 0x0000e980)
+__CSKY_INSN_FUNCS(bsr32,	0x0000fc00, 0x0000e000)
+__CSKY_INSN_FUNCS(jmpi32,	0x0000ffff, 0x0000eac0)
+__CSKY_INSN_FUNCS(jsri32,	0x0000ffff, 0x0000eae0)
+
+#endif /* __CSKY_KERNEL_PROBES_SIMULATE_INSN_H */
diff --git a/arch/csky/kernel/probes/uprobes.c b/arch/csky/kernel/probes/uprobes.c
new file mode 100644
index 0000000..b3a56c2
--- /dev/null
+++ b/arch/csky/kernel/probes/uprobes.c
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014-2016 Pratyush Anand <panand@redhat.com>
+ */
+#include <linux/highmem.h>
+#include <linux/ptrace.h>
+#include <linux/uprobes.h>
+#include <asm/cacheflush.h>
+
+#include "decode-insn.h"
+
+#define UPROBE_TRAP_NR	UINT_MAX
+
+unsigned long uprobe_get_swbp_addr(struct pt_regs *regs)
+{
+	return instruction_pointer(regs);
+}
+
+int arch_uprobe_analyze_insn(struct arch_uprobe *auprobe, struct mm_struct *mm,
+		unsigned long addr)
+{
+	probe_opcode_t insn;
+
+	insn = *(probe_opcode_t *)(&auprobe->insn[0]);
+
+	auprobe->insn_size = is_insn32(insn) ? 4 : 2;
+
+	switch (csky_probe_decode_insn(&insn, &auprobe->api)) {
+	case INSN_REJECTED:
+		return -EINVAL;
+
+	case INSN_GOOD_NO_SLOT:
+		auprobe->simulate = true;
+		break;
+
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+int arch_uprobe_pre_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
+{
+	struct uprobe_task *utask = current->utask;
+
+	utask->autask.saved_trap_no = current->thread.trap_no;
+	current->thread.trap_no = UPROBE_TRAP_NR;
+
+	instruction_pointer_set(regs, utask->xol_vaddr);
+
+	user_enable_single_step(current);
+
+	return 0;
+}
+
+int arch_uprobe_post_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
+{
+	struct uprobe_task *utask = current->utask;
+
+	WARN_ON_ONCE(current->thread.trap_no != UPROBE_TRAP_NR);
+
+	instruction_pointer_set(regs, utask->vaddr + auprobe->insn_size);
+
+	user_disable_single_step(current);
+
+	return 0;
+}
+
+bool arch_uprobe_xol_was_trapped(struct task_struct *t)
+{
+	if (t->thread.trap_no != UPROBE_TRAP_NR)
+		return true;
+
+	return false;
+}
+
+bool arch_uprobe_skip_sstep(struct arch_uprobe *auprobe, struct pt_regs *regs)
+{
+	probe_opcode_t insn;
+	unsigned long addr;
+
+	if (!auprobe->simulate)
+		return false;
+
+	insn = *(probe_opcode_t *)(&auprobe->insn[0]);
+	addr = instruction_pointer(regs);
+
+	if (auprobe->api.handler)
+		auprobe->api.handler(insn, addr, regs);
+
+	return true;
+}
+
+void arch_uprobe_abort_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
+{
+	struct uprobe_task *utask = current->utask;
+
+	/*
+	 * Task has received a fatal signal, so reset back to probbed
+	 * address.
+	 */
+	instruction_pointer_set(regs, utask->vaddr);
+
+	user_disable_single_step(current);
+}
+
+bool arch_uretprobe_is_alive(struct return_instance *ret, enum rp_check ctx,
+		struct pt_regs *regs)
+{
+	if (ctx == RP_CHECK_CHAIN_CALL)
+		return regs->usp <= ret->stack;
+	else
+		return regs->usp < ret->stack;
+}
+
+unsigned long
+arch_uretprobe_hijack_return_addr(unsigned long trampoline_vaddr,
+				  struct pt_regs *regs)
+{
+	unsigned long ra;
+
+	ra = regs->lr;
+
+	regs->lr = trampoline_vaddr;
+
+	return ra;
+}
+
+int arch_uprobe_exception_notify(struct notifier_block *self,
+				 unsigned long val, void *data)
+{
+	return NOTIFY_DONE;
+}
+
+int uprobe_breakpoint_handler(struct pt_regs *regs)
+{
+	if (uprobe_pre_sstep_notifier(regs))
+		return 1;
+
+	return 0;
+}
+
+int uprobe_single_step_handler(struct pt_regs *regs)
+{
+	if (uprobe_post_sstep_notifier(regs))
+		return 1;
+
+	return 0;
+}
diff --git a/arch/csky/kernel/ptrace.c b/arch/csky/kernel/ptrace.c
index 313623a..21ac260 100644
--- a/arch/csky/kernel/ptrace.c
+++ b/arch/csky/kernel/ptrace.c
@@ -193,6 +193,109 @@ const struct user_regset_view *task_user_regset_view(struct task_struct *task)
 	return &user_csky_view;
 }
 
+struct pt_regs_offset {
+	const char *name;
+	int offset;
+};
+
+#define REG_OFFSET_NAME(r) {.name = #r, .offset = offsetof(struct pt_regs, r)}
+#define REG_OFFSET_END {.name = NULL, .offset = 0}
+
+static const struct pt_regs_offset regoffset_table[] = {
+	REG_OFFSET_NAME(tls),
+	REG_OFFSET_NAME(lr),
+	REG_OFFSET_NAME(pc),
+	REG_OFFSET_NAME(sr),
+	REG_OFFSET_NAME(usp),
+	REG_OFFSET_NAME(orig_a0),
+	REG_OFFSET_NAME(a0),
+	REG_OFFSET_NAME(a1),
+	REG_OFFSET_NAME(a2),
+	REG_OFFSET_NAME(a3),
+	REG_OFFSET_NAME(regs[0]),
+	REG_OFFSET_NAME(regs[1]),
+	REG_OFFSET_NAME(regs[2]),
+	REG_OFFSET_NAME(regs[3]),
+	REG_OFFSET_NAME(regs[4]),
+	REG_OFFSET_NAME(regs[5]),
+	REG_OFFSET_NAME(regs[6]),
+	REG_OFFSET_NAME(regs[7]),
+	REG_OFFSET_NAME(regs[8]),
+	REG_OFFSET_NAME(regs[9]),
+#if defined(__CSKYABIV2__)
+	REG_OFFSET_NAME(exregs[0]),
+	REG_OFFSET_NAME(exregs[1]),
+	REG_OFFSET_NAME(exregs[2]),
+	REG_OFFSET_NAME(exregs[3]),
+	REG_OFFSET_NAME(exregs[4]),
+	REG_OFFSET_NAME(exregs[5]),
+	REG_OFFSET_NAME(exregs[6]),
+	REG_OFFSET_NAME(exregs[7]),
+	REG_OFFSET_NAME(exregs[8]),
+	REG_OFFSET_NAME(exregs[9]),
+	REG_OFFSET_NAME(exregs[10]),
+	REG_OFFSET_NAME(exregs[11]),
+	REG_OFFSET_NAME(exregs[12]),
+	REG_OFFSET_NAME(exregs[13]),
+	REG_OFFSET_NAME(exregs[14]),
+	REG_OFFSET_NAME(rhi),
+	REG_OFFSET_NAME(rlo),
+	REG_OFFSET_NAME(dcsr),
+#endif
+	REG_OFFSET_END,
+};
+
+/**
+ * regs_query_register_offset() - query register offset from its name
+ * @name:	the name of a register
+ *
+ * regs_query_register_offset() returns the offset of a register in struct
+ * pt_regs from its name. If the name is invalid, this returns -EINVAL;
+ */
+int regs_query_register_offset(const char *name)
+{
+	const struct pt_regs_offset *roff;
+
+	for (roff = regoffset_table; roff->name != NULL; roff++)
+		if (!strcmp(roff->name, name))
+			return roff->offset;
+	return -EINVAL;
+}
+
+/**
+ * regs_within_kernel_stack() - check the address in the stack
+ * @regs:      pt_regs which contains kernel stack pointer.
+ * @addr:      address which is checked.
+ *
+ * regs_within_kernel_stack() checks @addr is within the kernel stack page(s).
+ * If @addr is within the kernel stack, it returns true. If not, returns false.
+ */
+static bool regs_within_kernel_stack(struct pt_regs *regs, unsigned long addr)
+{
+	return (addr & ~(THREAD_SIZE - 1))  ==
+		(kernel_stack_pointer(regs) & ~(THREAD_SIZE - 1));
+}
+
+/**
+ * regs_get_kernel_stack_nth() - get Nth entry of the stack
+ * @regs:	pt_regs which contains kernel stack pointer.
+ * @n:		stack entry number.
+ *
+ * regs_get_kernel_stack_nth() returns @n th entry of the kernel stack which
+ * is specified by @regs. If the @n th entry is NOT in the kernel stack,
+ * this returns 0.
+ */
+unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs, unsigned int n)
+{
+	unsigned long *addr = (unsigned long *)kernel_stack_pointer(regs);
+
+	addr += n;
+	if (regs_within_kernel_stack(regs, (unsigned long)addr))
+		return *addr;
+	else
+		return 0;
+}
+
 void ptrace_disable(struct task_struct *child)
 {
 	singlestep_disable(child);
diff --git a/arch/csky/kernel/setup.c b/arch/csky/kernel/setup.c
index 3821e55..819a9a7 100644
--- a/arch/csky/kernel/setup.c
+++ b/arch/csky/kernel/setup.c
@@ -24,26 +24,9 @@ struct screen_info screen_info = {
 };
 #endif
 
-phys_addr_t __init_memblock memblock_end_of_REG0(void)
-{
-	return (memblock.memory.regions[0].base +
-		memblock.memory.regions[0].size);
-}
-
-phys_addr_t __init_memblock memblock_start_of_REG1(void)
-{
-	return memblock.memory.regions[1].base;
-}
-
-size_t __init_memblock memblock_size_of_REG1(void)
-{
-	return memblock.memory.regions[1].size;
-}
-
 static void __init csky_memblock_init(void)
 {
 	unsigned long zone_size[MAX_NR_ZONES];
-	unsigned long zhole_size[MAX_NR_ZONES];
 	signed long size;
 
 	memblock_reserve(__pa(_stext), _end - _stext);
@@ -54,54 +37,36 @@ static void __init csky_memblock_init(void)
 	memblock_dump_all();
 
 	memset(zone_size, 0, sizeof(zone_size));
-	memset(zhole_size, 0, sizeof(zhole_size));
 
 	min_low_pfn = PFN_UP(memblock_start_of_DRAM());
-	max_pfn	    = PFN_DOWN(memblock_end_of_DRAM());
-
-	max_low_pfn = PFN_UP(memblock_end_of_REG0());
-	if (max_low_pfn == 0)
-		max_low_pfn = max_pfn;
+	max_low_pfn = max_pfn = PFN_DOWN(memblock_end_of_DRAM());
 
 	size = max_pfn - min_low_pfn;
 
-	if (memblock.memory.cnt > 1) {
-		zone_size[ZONE_NORMAL]  =
-			PFN_DOWN(memblock_start_of_REG1()) - min_low_pfn;
-		zhole_size[ZONE_NORMAL] =
-			PFN_DOWN(memblock_start_of_REG1()) - max_low_pfn;
+	if (size <= PFN_DOWN(SSEG_SIZE - PHYS_OFFSET_OFFSET))
+		zone_size[ZONE_NORMAL] = size;
+	else if (size < PFN_DOWN(LOWMEM_LIMIT - PHYS_OFFSET_OFFSET)) {
+		zone_size[ZONE_NORMAL] =
+				PFN_DOWN(SSEG_SIZE - PHYS_OFFSET_OFFSET);
+		max_low_pfn = min_low_pfn + zone_size[ZONE_NORMAL];
 	} else {
-		if (size <= PFN_DOWN(LOWMEM_LIMIT - PHYS_OFFSET_OFFSET))
-			zone_size[ZONE_NORMAL] = max_pfn - min_low_pfn;
-		else {
-			zone_size[ZONE_NORMAL] =
+		zone_size[ZONE_NORMAL] =
 				PFN_DOWN(LOWMEM_LIMIT - PHYS_OFFSET_OFFSET);
-			max_low_pfn = min_low_pfn + zone_size[ZONE_NORMAL];
-		}
+		max_low_pfn = min_low_pfn + zone_size[ZONE_NORMAL];
+		write_mmu_msa1(read_mmu_msa0() + SSEG_SIZE);
 	}
 
 #ifdef CONFIG_HIGHMEM
-	size = 0;
-	if (memblock.memory.cnt > 1) {
-		size = PFN_DOWN(memblock_size_of_REG1());
-		highstart_pfn = PFN_DOWN(memblock_start_of_REG1());
-	} else {
-		size = max_pfn - min_low_pfn -
-			PFN_DOWN(LOWMEM_LIMIT - PHYS_OFFSET_OFFSET);
-		highstart_pfn =  min_low_pfn +
-			PFN_DOWN(LOWMEM_LIMIT - PHYS_OFFSET_OFFSET);
-	}
+	zone_size[ZONE_HIGHMEM] = max_pfn - max_low_pfn;
 
-	if (size > 0)
-		zone_size[ZONE_HIGHMEM] = size;
-
-	highend_pfn = max_pfn;
+	highstart_pfn = max_low_pfn;
+	highend_pfn   = max_pfn;
 #endif
 	memblock_set_current_limit(PFN_PHYS(max_low_pfn));
 
 	dma_contiguous_reserve(0);
 
-	free_area_init_node(0, zone_size, min_low_pfn, zhole_size);
+	free_area_init_node(0, zone_size, min_low_pfn, NULL);
 }
 
 void __init setup_arch(char **cmdline_p)
diff --git a/arch/csky/kernel/signal.c b/arch/csky/kernel/signal.c
index 9b1b7c0..9452d65 100644
--- a/arch/csky/kernel/signal.c
+++ b/arch/csky/kernel/signal.c
@@ -175,6 +175,8 @@ static void handle_signal(struct ksignal *ksig, struct pt_regs *regs)
 	sigset_t *oldset = sigmask_to_save();
 	int ret;
 
+	rseq_signal_deliver(ksig, regs);
+
 	/* Are we from a system call? */
 	if (in_syscall(regs)) {
 		/* Avoid additional syscall restarting via ret_from_exception */
@@ -251,6 +253,9 @@ static void do_signal(struct pt_regs *regs)
 asmlinkage void do_notify_resume(struct pt_regs *regs,
 	unsigned long thread_info_flags)
 {
+	if (thread_info_flags & _TIF_UPROBE)
+		uprobe_notify_resume(regs);
+
 	/* Handle pending signal delivery */
 	if (thread_info_flags & _TIF_SIGPENDING)
 		do_signal(regs);
@@ -258,5 +263,6 @@ asmlinkage void do_notify_resume(struct pt_regs *regs,
 	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
 		clear_thread_flag(TIF_NOTIFY_RESUME);
 		tracehook_notify_resume(regs);
+		rseq_handle_notify_resume(NULL, regs);
 	}
 }
diff --git a/arch/csky/kernel/smp.c b/arch/csky/kernel/smp.c
index 0bb0954..b5c5bc3 100644
--- a/arch/csky/kernel/smp.c
+++ b/arch/csky/kernel/smp.c
@@ -22,6 +22,9 @@
 #include <asm/sections.h>
 #include <asm/mmu_context.h>
 #include <asm/pgalloc.h>
+#ifdef CONFIG_CPU_HAS_FPU
+#include <abi/fpu.h>
+#endif
 
 struct ipi_data_struct {
 	unsigned long bits ____cacheline_aligned;
@@ -156,6 +159,8 @@ volatile unsigned int secondary_hint;
 volatile unsigned int secondary_ccr;
 volatile unsigned int secondary_stack;
 
+unsigned long secondary_msa1;
+
 int __cpu_up(unsigned int cpu, struct task_struct *tidle)
 {
 	unsigned long mask = 1 << cpu;
@@ -164,6 +169,7 @@ int __cpu_up(unsigned int cpu, struct task_struct *tidle)
 		(unsigned int) task_stack_page(tidle) + THREAD_SIZE - 8;
 	secondary_hint = mfcr("cr31");
 	secondary_ccr  = mfcr("cr18");
+	secondary_msa1 = read_mmu_msa1();
 
 	/*
 	 * Because other CPUs are in reset status, we must flush data
diff --git a/arch/csky/kernel/traps.c b/arch/csky/kernel/traps.c
index b057480..fcc3a69 100644
--- a/arch/csky/kernel/traps.c
+++ b/arch/csky/kernel/traps.c
@@ -14,6 +14,7 @@
 #include <linux/kallsyms.h>
 #include <linux/rtc.h>
 #include <linux/uaccess.h>
+#include <linux/kprobes.h>
 
 #include <asm/setup.h>
 #include <asm/traps.h>
@@ -109,14 +110,14 @@ void buserr(struct pt_regs *regs)
 	force_sig_fault(SIGSEGV, 0, (void __user *)regs->pc);
 }
 
-#define USR_BKPT 0x1464
 asmlinkage void trap_c(struct pt_regs *regs)
 {
 	int sig;
 	unsigned long vector;
 	siginfo_t info;
+	struct task_struct *tsk = current;
 
-	vector = (mfcr("psr") >> 16) & 0xff;
+	vector = (regs->sr >> 16) & 0xff;
 
 	switch (vector) {
 	case VEC_ZERODIV:
@@ -125,10 +126,27 @@ asmlinkage void trap_c(struct pt_regs *regs)
 		break;
 	/* ptrace */
 	case VEC_TRACE:
+#ifdef CONFIG_KPROBES
+		if (kprobe_single_step_handler(regs))
+			return;
+#endif
+#ifdef CONFIG_UPROBES
+		if (uprobe_single_step_handler(regs))
+			return;
+#endif
 		info.si_code = TRAP_TRACE;
 		sig = SIGTRAP;
 		break;
 	case VEC_ILLEGAL:
+		tsk->thread.trap_no = vector;
+#ifdef CONFIG_KPROBES
+		if (kprobe_breakpoint_handler(regs))
+			return;
+#endif
+#ifdef CONFIG_UPROBES
+		if (uprobe_breakpoint_handler(regs))
+			return;
+#endif
 		die_if_kernel("Kernel mode ILLEGAL", regs, vector);
 #ifndef CONFIG_CPU_NO_USER_BKPT
 		if (*(uint16_t *)instruction_pointer(regs) != USR_BKPT)
@@ -146,16 +164,20 @@ asmlinkage void trap_c(struct pt_regs *regs)
 		sig = SIGTRAP;
 		break;
 	case VEC_ACCESS:
+		tsk->thread.trap_no = vector;
 		return buserr(regs);
 #ifdef CONFIG_CPU_NEED_SOFTALIGN
 	case VEC_ALIGN:
+		tsk->thread.trap_no = vector;
 		return csky_alignment(regs);
 #endif
 #ifdef CONFIG_CPU_HAS_FPU
 	case VEC_FPE:
+		tsk->thread.trap_no = vector;
 		die_if_kernel("Kernel mode FPE", regs, vector);
 		return fpu_fpe(regs);
 	case VEC_PRIV:
+		tsk->thread.trap_no = vector;
 		die_if_kernel("Kernel mode PRIV", regs, vector);
 		if (fpu_libc_helper(regs))
 			return;
@@ -164,5 +186,8 @@ asmlinkage void trap_c(struct pt_regs *regs)
 		sig = SIGSEGV;
 		break;
 	}
+
+	tsk->thread.trap_no = vector;
+
 	send_sig(sig, current, 0);
 }
diff --git a/arch/csky/mm/cachev2.c b/arch/csky/mm/cachev2.c
index bc419f80..7a9664a 100644
--- a/arch/csky/mm/cachev2.c
+++ b/arch/csky/mm/cachev2.c
@@ -7,8 +7,12 @@
 #include <asm/cache.h>
 #include <asm/barrier.h>
 
+/* for L1-cache */
 #define INS_CACHE		(1 << 0)
+#define DATA_CACHE		(1 << 1)
 #define CACHE_INV		(1 << 4)
+#define CACHE_CLR		(1 << 5)
+#define CACHE_OMS		(1 << 6)
 
 void local_icache_inv_all(void *priv)
 {
@@ -16,11 +20,6 @@ void local_icache_inv_all(void *priv)
 	sync_is();
 }
 
-void icache_inv_all(void)
-{
-	on_each_cpu(local_icache_inv_all, NULL, 1);
-}
-
 #ifdef CONFIG_CPU_HAS_ICACHE_INS
 void icache_inv_range(unsigned long start, unsigned long end)
 {
@@ -31,9 +30,43 @@ void icache_inv_range(unsigned long start, unsigned long end)
 	sync_is();
 }
 #else
+struct cache_range {
+	unsigned long start;
+	unsigned long end;
+};
+
+static DEFINE_SPINLOCK(cache_lock);
+
+static inline void cache_op_line(unsigned long i, unsigned int val)
+{
+	mtcr("cr22", i);
+	mtcr("cr17", val);
+}
+
+void local_icache_inv_range(void *priv)
+{
+	struct cache_range *param = priv;
+	unsigned long i = param->start & ~(L1_CACHE_BYTES - 1);
+	unsigned long flags;
+
+	spin_lock_irqsave(&cache_lock, flags);
+
+	for (; i < param->end; i += L1_CACHE_BYTES)
+		cache_op_line(i, INS_CACHE | CACHE_INV | CACHE_OMS);
+
+	spin_unlock_irqrestore(&cache_lock, flags);
+
+	sync_is();
+}
+
 void icache_inv_range(unsigned long start, unsigned long end)
 {
-	icache_inv_all();
+	struct cache_range param = { start, end };
+
+	if (irqs_disabled())
+		local_icache_inv_range(&param);
+	else
+		on_each_cpu(local_icache_inv_range, &param, 1);
 }
 #endif
 
diff --git a/arch/csky/mm/fault.c b/arch/csky/mm/fault.c
index f76618b..4e6dc68 100644
--- a/arch/csky/mm/fault.c
+++ b/arch/csky/mm/fault.c
@@ -18,6 +18,7 @@
 #include <linux/extable.h>
 #include <linux/uaccess.h>
 #include <linux/perf_event.h>
+#include <linux/kprobes.h>
 
 #include <asm/hardirq.h>
 #include <asm/mmu_context.h>
@@ -53,6 +54,9 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long write,
 	int fault;
 	unsigned long address = mmu_meh & PAGE_MASK;
 
+	if (kprobe_page_fault(regs, tsk->thread.trap_no))
+		return;
+
 	si_code = SEGV_MAPERR;
 
 #ifndef CONFIG_CPU_HAS_TLBI
@@ -137,7 +141,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long write,
 		if (!(vma->vm_flags & VM_WRITE))
 			goto bad_area;
 	} else {
-		if (!(vma->vm_flags & (VM_READ | VM_WRITE | VM_EXEC)))
+		if (unlikely(!vma_is_accessible(vma)))
 			goto bad_area;
 	}
 
@@ -179,11 +183,14 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long write,
 bad_area_nosemaphore:
 	/* User mode accesses just cause a SIGSEGV */
 	if (user_mode(regs)) {
+		tsk->thread.trap_no = (regs->sr >> 16) & 0xff;
 		force_sig_fault(SIGSEGV, si_code, (void __user *)address);
 		return;
 	}
 
 no_context:
+	tsk->thread.trap_no = (regs->sr >> 16) & 0xff;
+
 	/* Are we prepared to handle this kernel fault? */
 	if (fixup_exception(regs))
 		return;
@@ -198,6 +205,8 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long write,
 	die_if_kernel("Oops", regs, write);
 
 out_of_memory:
+	tsk->thread.trap_no = (regs->sr >> 16) & 0xff;
+
 	/*
 	 * We ran out of memory, call the OOM killer, and return the userspace
 	 * (which will retry the fault, or kill us if we got oom-killed).
@@ -206,6 +215,8 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long write,
 	return;
 
 do_sigbus:
+	tsk->thread.trap_no = (regs->sr >> 16) & 0xff;
+
 	up_read(&mm->mmap_sem);
 
 	/* Kernel mode? Handle exceptions or die */
diff --git a/arch/h8300/include/asm/page.h b/arch/h8300/include/asm/page.h
index 8da5124..53e0375 100644
--- a/arch/h8300/include/asm/page.h
+++ b/arch/h8300/include/asm/page.h
@@ -6,8 +6,6 @@
 #include <linux/types.h>
 
 #define MAP_NR(addr) (((uintptr_t)(addr)-PAGE_OFFSET) >> PAGE_SHIFT)
-#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
-				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
 
 #ifndef __ASSEMBLY__
 extern unsigned long rom_length;
diff --git a/arch/h8300/include/uapi/asm/bitsperlong.h b/arch/h8300/include/uapi/asm/bitsperlong.h
deleted file mode 100644
index a33e358..0000000
--- a/arch/h8300/include/uapi/asm/bitsperlong.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef _UAPI__ASM_H8300_BITS_PER_LONG
-#define _UAPI__ASM_H8300_BITS_PER_LONG
-
-#include <asm-generic/bitsperlong.h>
-
-#if !defined(__ASSEMBLY__)
-/* h8300-unknown-linux required long */
-#define __kernel_size_t __kernel_size_t
-typedef unsigned long	__kernel_size_t;
-typedef long		__kernel_ssize_t;
-typedef long		__kernel_ptrdiff_t;
-#endif
-
-#endif /* _UAPI__ASM_H8300_BITS_PER_LONG */
diff --git a/arch/h8300/include/uapi/asm/posix_types.h b/arch/h8300/include/uapi/asm/posix_types.h
new file mode 100644
index 0000000..3efc9dd
--- /dev/null
+++ b/arch/h8300/include/uapi/asm/posix_types.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */
+#ifndef _UAPI_ASM_POSIX_TYPES_H
+#define _UAPI_ASM_POSIX_TYPES_H
+
+/* h8300-unknown-linux required long */
+#define __kernel_size_t __kernel_size_t
+typedef unsigned long	__kernel_size_t;
+typedef long		__kernel_ssize_t;
+typedef long		__kernel_ptrdiff_t;
+
+#include <asm-generic/posix_types.h>
+
+#endif /* _UAPI_ASM_POSIX_TYPES_H */
diff --git a/arch/hexagon/include/asm/page.h b/arch/hexagon/include/asm/page.h
index ee31f36..7cbf719 100644
--- a/arch/hexagon/include/asm/page.h
+++ b/arch/hexagon/include/asm/page.h
@@ -93,8 +93,7 @@ struct page;
 #define virt_to_page(kaddr) pfn_to_page(PFN_DOWN(__pa(kaddr)))
 
 /* Default vm area behavior is non-executable.  */
-#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | \
-				VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+#define VM_DATA_DEFAULT_FLAGS	VM_DATA_FLAGS_NON_EXEC
 
 #define pfn_valid(pfn) ((pfn) < max_mapnr)
 #define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
diff --git a/arch/hexagon/include/asm/pgtable.h b/arch/hexagon/include/asm/pgtable.h
index 2fec20a..d383e8b 100644
--- a/arch/hexagon/include/asm/pgtable.h
+++ b/arch/hexagon/include/asm/pgtable.h
@@ -158,8 +158,6 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD];  /* located in head.S */
 
 /* Seems to be zero even in architectures where the zero page is firewalled? */
 #define FIRST_USER_ADDRESS 0UL
-#define pte_special(pte)	0
-#define pte_mkspecial(pte)	(pte)
 
 /*  HUGETLB not working currently  */
 #ifdef CONFIG_HUGETLB_PAGE
diff --git a/arch/ia64/configs/bigsur_defconfig b/arch/ia64/configs/bigsur_defconfig
index b630bd7..f3ba813 100644
--- a/arch/ia64/configs/bigsur_defconfig
+++ b/arch/ia64/configs/bigsur_defconfig
@@ -57,7 +57,8 @@
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_HW_RANDOM is not set
-CONFIG_EFI_RTC=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_EFI=y
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_AGP=m
diff --git a/arch/ia64/configs/generic_defconfig b/arch/ia64/configs/generic_defconfig
index 661d90b..cb267a0 100644
--- a/arch/ia64/configs/generic_defconfig
+++ b/arch/ia64/configs/generic_defconfig
@@ -94,7 +94,8 @@
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_HW_RANDOM is not set
-CONFIG_EFI_RTC=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_EFI=y
 CONFIG_RAW_DRIVER=m
 CONFIG_HPET=y
 CONFIG_AGP=m
diff --git a/arch/ia64/configs/gensparse_defconfig b/arch/ia64/configs/gensparse_defconfig
index 7844e6a..7e25f2f 100644
--- a/arch/ia64/configs/gensparse_defconfig
+++ b/arch/ia64/configs/gensparse_defconfig
@@ -82,7 +82,8 @@
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_HW_RANDOM is not set
-CONFIG_EFI_RTC=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_EFI=y
 CONFIG_RAW_DRIVER=m
 CONFIG_HPET=y
 CONFIG_AGP=m
diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig
index 1d6e2a0..3f486d5 100644
--- a/arch/ia64/configs/tiger_defconfig
+++ b/arch/ia64/configs/tiger_defconfig
@@ -86,7 +86,8 @@
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_HW_RANDOM is not set
-CONFIG_EFI_RTC=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_EFI=y
 CONFIG_RAW_DRIVER=m
 CONFIG_HPET=y
 CONFIG_AGP=m
diff --git a/arch/ia64/configs/zx1_defconfig b/arch/ia64/configs/zx1_defconfig
index 8c92e09..261e98e 100644
--- a/arch/ia64/configs/zx1_defconfig
+++ b/arch/ia64/configs/zx1_defconfig
@@ -35,7 +35,6 @@
 CONFIG_CHR_DEV_ST=y
 CONFIG_CHR_DEV_OSST=y
 CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
@@ -69,7 +68,8 @@
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_HW_RANDOM is not set
-CONFIG_EFI_RTC=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_EFI=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_AGP=y
 CONFIG_AGP_HP_ZX1=y
diff --git a/arch/ia64/include/asm/page.h b/arch/ia64/include/asm/page.h
index 5798bd2..b69a549 100644
--- a/arch/ia64/include/asm/page.h
+++ b/arch/ia64/include/asm/page.h
@@ -218,10 +218,7 @@ get_order (unsigned long size)
 
 #define PAGE_OFFSET			RGN_BASE(RGN_KERNEL)
 
-#define VM_DATA_DEFAULT_FLAGS		(VM_READ | VM_WRITE |					\
-					 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC |		\
-					 (((current->personality & READ_IMPLIES_EXEC) != 0)	\
-					  ? VM_EXEC : 0))
+#define VM_DATA_DEFAULT_FLAGS	VM_DATA_FLAGS_TSK_EXEC
 
 #define GATE_ADDR		RGN_BASE(RGN_GATE)
 
diff --git a/arch/ia64/include/asm/pgtable.h b/arch/ia64/include/asm/pgtable.h
index d602e7c..0e7b645 100644
--- a/arch/ia64/include/asm/pgtable.h
+++ b/arch/ia64/include/asm/pgtable.h
@@ -298,7 +298,6 @@ extern unsigned long VMALLOC_END;
 #define pte_exec(pte)		((pte_val(pte) & _PAGE_AR_RX) != 0)
 #define pte_dirty(pte)		((pte_val(pte) & _PAGE_D) != 0)
 #define pte_young(pte)		((pte_val(pte) & _PAGE_A) != 0)
-#define pte_special(pte)	0
 
 /*
  * Note: we convert AR_RWX to AR_RX and AR_RW to AR_R by clearing the 2nd bit in the
@@ -311,7 +310,6 @@ extern unsigned long VMALLOC_END;
 #define pte_mkclean(pte)	(__pte(pte_val(pte) & ~_PAGE_D))
 #define pte_mkdirty(pte)	(__pte(pte_val(pte) | _PAGE_D))
 #define pte_mkhuge(pte)		(__pte(pte_val(pte)))
-#define pte_mkspecial(pte)	(pte)
 
 /*
  * Because ia64's Icache and Dcache is not coherent (on a cpu), we need to
diff --git a/arch/ia64/kernel/.gitignore b/arch/ia64/kernel/.gitignore
index 21cb0da..03748272 100644
--- a/arch/ia64/kernel/.gitignore
+++ b/arch/ia64/kernel/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 gate.lds
 vmlinux.lds
diff --git a/arch/ia64/kernel/syscalls/syscallhdr.sh b/arch/ia64/kernel/syscalls/syscallhdr.sh
index 0c2d2c7..f407b6e 100644
--- a/arch/ia64/kernel/syscalls/syscallhdr.sh
+++ b/arch/ia64/kernel/syscalls/syscallhdr.sh
@@ -32,5 +32,5 @@
 	printf "#define __NR_syscalls\t%s\n" "${nxt}"
 	printf "#endif\n"
 	printf "\n"
-	printf "#endif /* %s */" "${fileguard}"
+	printf "#endif /* %s */\n" "${fileguard}"
 ) > "$out"
diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S
index 1ec6b70..6b5652e 100644
--- a/arch/ia64/kernel/vmlinux.lds.S
+++ b/arch/ia64/kernel/vmlinux.lds.S
@@ -54,6 +54,8 @@
 		CPUIDLE_TEXT
 		LOCK_TEXT
 		KPROBES_TEXT
+		IRQENTRY_TEXT
+		SOFTIRQENTRY_TEXT
 		*(.gnu.linkonce.t*)
 	}
 
diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c
index b01d68a..d637b4e 100644
--- a/arch/ia64/mm/init.c
+++ b/arch/ia64/mm/init.c
@@ -670,13 +670,16 @@ mem_init (void)
 
 #ifdef CONFIG_MEMORY_HOTPLUG
 int arch_add_memory(int nid, u64 start, u64 size,
-			struct mhp_restrictions *restrictions)
+		    struct mhp_params *params)
 {
 	unsigned long start_pfn = start >> PAGE_SHIFT;
 	unsigned long nr_pages = size >> PAGE_SHIFT;
 	int ret;
 
-	ret = __add_pages(nid, start_pfn, nr_pages, restrictions);
+	if (WARN_ON_ONCE(params->pgprot.pgprot != PAGE_KERNEL.pgprot))
+		return -EINVAL;
+
+	ret = __add_pages(nid, start_pfn, nr_pages, params);
 	if (ret)
 		printk("%s: Problem encountered in __add_pages() as ret=%d\n",
 		       __func__,  ret);
diff --git a/arch/m68k/68000/timers.c b/arch/m68k/68000/timers.c
index 71ddb4c..1c8e8a8 100644
--- a/arch/m68k/68000/timers.c
+++ b/arch/m68k/68000/timers.c
@@ -68,14 +68,6 @@ static irqreturn_t hw_tick(int irq, void *dummy)
 
 /***************************************************************************/
 
-static struct irqaction m68328_timer_irq = {
-	.name	 = "timer",
-	.flags	 = IRQF_TIMER,
-	.handler = hw_tick,
-};
-
-/***************************************************************************/
-
 static u64 m68328_read_clk(struct clocksource *cs)
 {
 	unsigned long flags;
@@ -102,11 +94,17 @@ static struct clocksource m68328_clk = {
 
 void hw_timer_init(irq_handler_t handler)
 {
+	int ret;
+
 	/* disable timer 1 */
 	TCTL = 0;
 
 	/* set ISR */
-	setup_irq(TMR_IRQ_NUM, &m68328_timer_irq);
+	ret = request_irq(TMR_IRQ_NUM, hw_tick, IRQF_TIMER, "timer", NULL);
+	if (ret) {
+		pr_err("Failed to request irq %d (timer): %pe\n", TMR_IRQ_NUM,
+		       ERR_PTR(ret));
+	}
 
 	/* Restart mode, Enable int, Set clock source */
 	TCTL = TCTL_OM | TCTL_IRQEN | CLOCK_SOURCE;
diff --git a/arch/m68k/coldfire/pit.c b/arch/m68k/coldfire/pit.c
index eb6f16b..fd1d9c9 100644
--- a/arch/m68k/coldfire/pit.c
+++ b/arch/m68k/coldfire/pit.c
@@ -111,14 +111,6 @@ static irqreturn_t pit_tick(int irq, void *dummy)
 
 /***************************************************************************/
 
-static struct irqaction pit_irq = {
-	.name	 = "timer",
-	.flags	 = IRQF_TIMER,
-	.handler = pit_tick,
-};
-
-/***************************************************************************/
-
 static u64 pit_read_clk(struct clocksource *cs)
 {
 	unsigned long flags;
@@ -146,6 +138,8 @@ static struct clocksource pit_clk = {
 
 void hw_timer_init(irq_handler_t handler)
 {
+	int ret;
+
 	cf_pit_clockevent.cpumask = cpumask_of(smp_processor_id());
 	cf_pit_clockevent.mult = div_sc(FREQ, NSEC_PER_SEC, 32);
 	cf_pit_clockevent.max_delta_ns =
@@ -156,7 +150,11 @@ void hw_timer_init(irq_handler_t handler)
 	cf_pit_clockevent.min_delta_ticks = 0x3f;
 	clockevents_register_device(&cf_pit_clockevent);
 
-	setup_irq(MCF_IRQ_PIT1, &pit_irq);
+	ret = request_irq(MCF_IRQ_PIT1, pit_tick, IRQF_TIMER, "timer", NULL);
+	if (ret) {
+		pr_err("Failed to request irq %d (timer): %pe\n", MCF_IRQ_PIT1,
+		       ERR_PTR(ret));
+	}
 
 	clocksource_register_hz(&pit_clk, FREQ);
 }
diff --git a/arch/m68k/coldfire/sltimers.c b/arch/m68k/coldfire/sltimers.c
index 1b11e7b..5ab81c9 100644
--- a/arch/m68k/coldfire/sltimers.c
+++ b/arch/m68k/coldfire/sltimers.c
@@ -50,18 +50,19 @@ irqreturn_t mcfslt_profile_tick(int irq, void *dummy)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction mcfslt_profile_irq = {
-	.name	 = "profile timer",
-	.flags	 = IRQF_TIMER,
-	.handler = mcfslt_profile_tick,
-};
-
 void mcfslt_profile_init(void)
 {
+	int ret;
+
 	printk(KERN_INFO "PROFILE: lodging TIMER 1 @ %dHz as profile timer\n",
 	       PROFILEHZ);
 
-	setup_irq(MCF_IRQ_PROFILER, &mcfslt_profile_irq);
+	ret = request_irq(MCF_IRQ_PROFILER, mcfslt_profile_tick, IRQF_TIMER,
+			  "profile timer", NULL);
+	if (ret) {
+		pr_err("Failed to request irq %d (profile timer): %pe\n",
+		       MCF_IRQ_PROFILER, ERR_PTR(ret));
+	}
 
 	/* Set up TIMER 2 as high speed profile clock */
 	__raw_writel(MCF_BUSCLK / PROFILEHZ - 1, PA(MCFSLT_STCNT));
@@ -92,12 +93,6 @@ static irqreturn_t mcfslt_tick(int irq, void *dummy)
 	return timer_interrupt(irq, dummy);
 }
 
-static struct irqaction mcfslt_timer_irq = {
-	.name	 = "timer",
-	.flags	 = IRQF_TIMER,
-	.handler = mcfslt_tick,
-};
-
 static u64 mcfslt_read_clk(struct clocksource *cs)
 {
 	unsigned long flags;
@@ -126,6 +121,8 @@ static struct clocksource mcfslt_clk = {
 
 void hw_timer_init(irq_handler_t handler)
 {
+	int r;
+
 	mcfslt_cycles_per_jiffy = MCF_BUSCLK / HZ;
 	/*
 	 *	The coldfire slice timer (SLT) runs from STCNT to 0 included,
@@ -140,7 +137,11 @@ void hw_timer_init(irq_handler_t handler)
 	mcfslt_cnt = mcfslt_cycles_per_jiffy;
 
 	timer_interrupt = handler;
-	setup_irq(MCF_IRQ_TIMER, &mcfslt_timer_irq);
+	r = request_irq(MCF_IRQ_TIMER, mcfslt_tick, IRQF_TIMER, "timer", NULL);
+	if (r) {
+		pr_err("Failed to request irq %d (timer): %pe\n", MCF_IRQ_TIMER,
+		       ERR_PTR(r));
+	}
 
 	clocksource_register_hz(&mcfslt_clk, MCF_BUSCLK);
 
diff --git a/arch/m68k/coldfire/timers.c b/arch/m68k/coldfire/timers.c
index 227aa5d..b8301fd 100644
--- a/arch/m68k/coldfire/timers.c
+++ b/arch/m68k/coldfire/timers.c
@@ -82,14 +82,6 @@ static irqreturn_t mcftmr_tick(int irq, void *dummy)
 
 /***************************************************************************/
 
-static struct irqaction mcftmr_timer_irq = {
-	.name	 = "timer",
-	.flags	 = IRQF_TIMER,
-	.handler = mcftmr_tick,
-};
-
-/***************************************************************************/
-
 static u64 mcftmr_read_clk(struct clocksource *cs)
 {
 	unsigned long flags;
@@ -118,6 +110,8 @@ static struct clocksource mcftmr_clk = {
 
 void hw_timer_init(irq_handler_t handler)
 {
+	int r;
+
 	__raw_writew(MCFTIMER_TMR_DISABLE, TA(MCFTIMER_TMR));
 	mcftmr_cycles_per_jiffy = FREQ / HZ;
 	/*
@@ -134,7 +128,11 @@ void hw_timer_init(irq_handler_t handler)
 
 	timer_interrupt = handler;
 	init_timer_irq();
-	setup_irq(MCF_IRQ_TIMER, &mcftmr_timer_irq);
+	r = request_irq(MCF_IRQ_TIMER, mcftmr_tick, IRQF_TIMER, "timer", NULL);
+	if (r) {
+		pr_err("Failed to request irq %d (timer): %pe\n", MCF_IRQ_TIMER,
+		       ERR_PTR(r));
+	}
 
 #ifdef CONFIG_HIGHPROFILE
 	coldfire_profile_init();
@@ -170,14 +168,10 @@ irqreturn_t coldfire_profile_tick(int irq, void *dummy)
 
 /***************************************************************************/
 
-static struct irqaction coldfire_profile_irq = {
-	.name	 = "profile timer",
-	.flags	 = IRQF_TIMER,
-	.handler = coldfire_profile_tick,
-};
-
 void coldfire_profile_init(void)
 {
+	int ret;
+
 	printk(KERN_INFO "PROFILE: lodging TIMER2 @ %dHz as profile timer\n",
 	       PROFILEHZ);
 
@@ -188,7 +182,12 @@ void coldfire_profile_init(void)
 	__raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
 		MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, PA(MCFTIMER_TMR));
 
-	setup_irq(MCF_IRQ_PROFILER, &coldfire_profile_irq);
+	ret = request_irq(MCF_IRQ_PROFILER, coldfire_profile_tick, IRQF_TIMER,
+			  "profile timer", NULL);
+	if (ret) {
+		pr_err("Failed to request irq %d (profile timer): %pe\n",
+		       MCF_IRQ_PROFILER, ERR_PTR(ret));
+	}
 }
 
 /***************************************************************************/
diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig
index 9818d0e..5b3a273 100644
--- a/arch/m68k/configs/amiga_defconfig
+++ b/arch/m68k/configs/amiga_defconfig
@@ -333,7 +333,6 @@
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
 CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SAS_ATTRS=m
diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig
index db2402c..0bf0907 100644
--- a/arch/m68k/configs/apollo_defconfig
+++ b/arch/m68k/configs/apollo_defconfig
@@ -318,7 +318,6 @@
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
 CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SAS_ATTRS=m
diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig
index 07a28b4..876e692 100644
--- a/arch/m68k/configs/atari_defconfig
+++ b/arch/m68k/configs/atari_defconfig
@@ -333,7 +333,6 @@
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
 CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SAS_ATTRS=m
diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig
index 0335893..aa59c24 100644
--- a/arch/m68k/configs/bvme6000_defconfig
+++ b/arch/m68k/configs/bvme6000_defconfig
@@ -315,7 +315,6 @@
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
 CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SAS_ATTRS=m
diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig
index ee4d02a..308cd93 100644
--- a/arch/m68k/configs/hp300_defconfig
+++ b/arch/m68k/configs/hp300_defconfig
@@ -317,7 +317,6 @@
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
 CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SAS_ATTRS=m
diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig
index 442eed6..0bc210a 100644
--- a/arch/m68k/configs/mac_defconfig
+++ b/arch/m68k/configs/mac_defconfig
@@ -324,7 +324,6 @@
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
 CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SAS_ATTRS=m
diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig
index 1de7da7..3b3b832 100644
--- a/arch/m68k/configs/multi_defconfig
+++ b/arch/m68k/configs/multi_defconfig
@@ -357,7 +357,6 @@
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
 CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SAS_ATTRS=m
diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig
index ced341e..e3633c6 100644
--- a/arch/m68k/configs/mvme147_defconfig
+++ b/arch/m68k/configs/mvme147_defconfig
@@ -314,7 +314,6 @@
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
 CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SAS_ATTRS=m
diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig
index 006188f..88b3f7f 100644
--- a/arch/m68k/configs/mvme16x_defconfig
+++ b/arch/m68k/configs/mvme16x_defconfig
@@ -315,7 +315,6 @@
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
 CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SAS_ATTRS=m
diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig
index c65d985..3dd5b53 100644
--- a/arch/m68k/configs/q40_defconfig
+++ b/arch/m68k/configs/q40_defconfig
@@ -323,7 +323,6 @@
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
 CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SAS_ATTRS=m
diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig
index 32905fe..715e015 100644
--- a/arch/m68k/configs/sun3_defconfig
+++ b/arch/m68k/configs/sun3_defconfig
@@ -312,7 +312,6 @@
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
 CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SAS_ATTRS=m
diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig
index 32b0969..f9ff129 100644
--- a/arch/m68k/configs/sun3x_defconfig
+++ b/arch/m68k/configs/sun3x_defconfig
@@ -312,7 +312,6 @@
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
 CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SAS_ATTRS=m
diff --git a/arch/m68k/include/asm/Kbuild b/arch/m68k/include/asm/Kbuild
index a0765aa..1bff55a 100644
--- a/arch/m68k/include/asm/Kbuild
+++ b/arch/m68k/include/asm/Kbuild
@@ -1,7 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 generated-y += syscall_table.h
 generic-y += extable.h
-generic-y += hardirq.h
 generic-y += kvm_para.h
 generic-y += local64.h
 generic-y += mcs_spinlock.h
diff --git a/arch/m68k/include/asm/mcf_pgtable.h b/arch/m68k/include/asm/mcf_pgtable.h
index b9f45ae..0031cd3 100644
--- a/arch/m68k/include/asm/mcf_pgtable.h
+++ b/arch/m68k/include/asm/mcf_pgtable.h
@@ -235,11 +235,6 @@ static inline int pte_young(pte_t pte)
 	return pte_val(pte) & CF_PAGE_ACCESSED;
 }
 
-static inline int pte_special(pte_t pte)
-{
-	return 0;
-}
-
 static inline pte_t pte_wrprotect(pte_t pte)
 {
 	pte_val(pte) &= ~CF_PAGE_WRITABLE;
@@ -312,11 +307,6 @@ static inline pte_t pte_mkcache(pte_t pte)
 	return pte;
 }
 
-static inline pte_t pte_mkspecial(pte_t pte)
-{
-	return pte;
-}
-
 #define swapper_pg_dir kernel_pg_dir
 extern pgd_t kernel_pg_dir[PTRS_PER_PGD];
 
diff --git a/arch/m68k/include/asm/motorola_pgtable.h b/arch/m68k/include/asm/motorola_pgtable.h
index 4b91a47..48f19f0 100644
--- a/arch/m68k/include/asm/motorola_pgtable.h
+++ b/arch/m68k/include/asm/motorola_pgtable.h
@@ -174,7 +174,6 @@ static inline void pud_set(pud_t *pudp, pmd_t *pmdp)
 static inline int pte_write(pte_t pte)		{ return !(pte_val(pte) & _PAGE_RONLY); }
 static inline int pte_dirty(pte_t pte)		{ return pte_val(pte) & _PAGE_DIRTY; }
 static inline int pte_young(pte_t pte)		{ return pte_val(pte) & _PAGE_ACCESSED; }
-static inline int pte_special(pte_t pte)	{ return 0; }
 
 static inline pte_t pte_wrprotect(pte_t pte)	{ pte_val(pte) |= _PAGE_RONLY; return pte; }
 static inline pte_t pte_mkclean(pte_t pte)	{ pte_val(pte) &= ~_PAGE_DIRTY; return pte; }
@@ -192,7 +191,6 @@ static inline pte_t pte_mkcache(pte_t pte)
 	pte_val(pte) = (pte_val(pte) & _CACHEMASK040) | m68k_supervisor_cachemode;
 	return pte;
 }
-static inline pte_t pte_mkspecial(pte_t pte)	{ return pte; }
 
 #define PAGE_DIR_OFFSET(tsk,address) pgd_offset((tsk),(address))
 
diff --git a/arch/m68k/include/asm/page.h b/arch/m68k/include/asm/page.h
index da54648..2614a12 100644
--- a/arch/m68k/include/asm/page.h
+++ b/arch/m68k/include/asm/page.h
@@ -65,9 +65,6 @@ extern unsigned long _ramend;
 #define __phys_to_pfn(paddr)	((unsigned long)((paddr) >> PAGE_SHIFT))
 #define __pfn_to_phys(pfn)	PFN_PHYS(pfn)
 
-#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
-				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
 #include <asm-generic/getorder.h>
 
 #endif /* _M68K_PAGE_H */
diff --git a/arch/m68k/include/asm/sun3_pgtable.h b/arch/m68k/include/asm/sun3_pgtable.h
index bc41552..0caa18a 100644
--- a/arch/m68k/include/asm/sun3_pgtable.h
+++ b/arch/m68k/include/asm/sun3_pgtable.h
@@ -155,7 +155,6 @@ static inline void pmd_clear (pmd_t *pmdp) { pmd_val (*pmdp) = 0; }
 static inline int pte_write(pte_t pte)		{ return pte_val(pte) & SUN3_PAGE_WRITEABLE; }
 static inline int pte_dirty(pte_t pte)		{ return pte_val(pte) & SUN3_PAGE_MODIFIED; }
 static inline int pte_young(pte_t pte)		{ return pte_val(pte) & SUN3_PAGE_ACCESSED; }
-static inline int pte_special(pte_t pte)	{ return 0; }
 
 static inline pte_t pte_wrprotect(pte_t pte)	{ pte_val(pte) &= ~SUN3_PAGE_WRITEABLE; return pte; }
 static inline pte_t pte_mkclean(pte_t pte)	{ pte_val(pte) &= ~SUN3_PAGE_MODIFIED; return pte; }
@@ -168,7 +167,6 @@ static inline pte_t pte_mknocache(pte_t pte)	{ pte_val(pte) |= SUN3_PAGE_NOCACHE
 //static inline pte_t pte_mkcache(pte_t pte)	{ pte_val(pte) &= SUN3_PAGE_NOCACHE; return pte; }
 // until then, use:
 static inline pte_t pte_mkcache(pte_t pte)	{ return pte; }
-static inline pte_t pte_mkspecial(pte_t pte)	{ return pte; }
 
 extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
 extern pgd_t kernel_pg_dir[PTRS_PER_PGD];
diff --git a/arch/m68k/kernel/.gitignore b/arch/m68k/kernel/.gitignore
index c5f676c..bbb90f9 100644
--- a/arch/m68k/kernel/.gitignore
+++ b/arch/m68k/kernel/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 vmlinux.lds
diff --git a/arch/m68k/mm/fault.c b/arch/m68k/mm/fault.c
index f7afb98..3bfb5c8 100644
--- a/arch/m68k/mm/fault.c
+++ b/arch/m68k/mm/fault.c
@@ -125,7 +125,7 @@ int do_page_fault(struct pt_regs *regs, unsigned long address,
 		case 1:		/* read, present */
 			goto acc_err;
 		case 0:		/* read, not present */
-			if (!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE)))
+			if (unlikely(!vma_is_accessible(vma)))
 				goto acc_err;
 	}
 
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index 242f58e..9606c24 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -8,7 +8,7 @@
 	select ARCH_HAS_GCOV_PROFILE_ALL
 	select ARCH_HAS_SYNC_DMA_FOR_CPU
 	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
-	select ARCH_HAS_UNCACHED_SEGMENT if !MMU
+	select ARCH_HAS_DMA_SET_UNCACHED if !MMU
 	select ARCH_MIGHT_HAVE_PC_PARPORT
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select BUILDTIME_TABLE_SORT
@@ -47,8 +47,6 @@
 	select CPU_NO_EFFICIENT_FFS
 	select MMU_GATHER_NO_RANGE if MMU
 	select SPARSE_IRQ
-	select GENERIC_IRQ_MULTI_HANDLER
-	select HANDLE_DOMAIN_IRQ
 
 # Endianness selection
 choice
diff --git a/arch/microblaze/boot/.gitignore b/arch/microblaze/boot/.gitignore
index 679502d..11a9e22 100644
--- a/arch/microblaze/boot/.gitignore
+++ b/arch/microblaze/boot/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 linux.bin*
 simpleImage.*
diff --git a/arch/microblaze/include/asm/irq.h b/arch/microblaze/include/asm/irq.h
index cb6ab55..0a28e80 100644
--- a/arch/microblaze/include/asm/irq.h
+++ b/arch/microblaze/include/asm/irq.h
@@ -11,4 +11,7 @@
 struct pt_regs;
 extern void do_IRQ(struct pt_regs *regs);
 
+/* should be defined in each interrupt controller driver */
+extern unsigned int xintc_get_irq(void);
+
 #endif /* _ASM_MICROBLAZE_IRQ_H */
diff --git a/arch/microblaze/include/asm/page.h b/arch/microblaze/include/asm/page.h
index ae7215c..b13463d 100644
--- a/arch/microblaze/include/asm/page.h
+++ b/arch/microblaze/include/asm/page.h
@@ -194,8 +194,6 @@ extern int page_is_ram(unsigned long pfn);
 
 #ifdef CONFIG_MMU
 
-#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
-				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
 #endif /* CONFIG_MMU */
 
 #endif /* __KERNEL__ */
diff --git a/arch/microblaze/include/asm/pgtable.h b/arch/microblaze/include/asm/pgtable.h
index 45b3087..6b056f6 100644
--- a/arch/microblaze/include/asm/pgtable.h
+++ b/arch/microblaze/include/asm/pgtable.h
@@ -77,10 +77,6 @@ extern pte_t *va_to_pte(unsigned long address);
  * Undefined behaviour if not..
  */
 
-static inline int pte_special(pte_t pte)	{ return 0; }
-
-static inline pte_t pte_mkspecial(pte_t pte)	{ return pte; }
-
 /* Start and end of the vmalloc area. */
 /* Make sure to map the vmalloc area above the pinned kernel memory area
    of 32Mb.  */
diff --git a/arch/microblaze/kernel/.gitignore b/arch/microblaze/kernel/.gitignore
index c5f676c..bbb90f9 100644
--- a/arch/microblaze/kernel/.gitignore
+++ b/arch/microblaze/kernel/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 vmlinux.lds
diff --git a/arch/microblaze/kernel/irq.c b/arch/microblaze/kernel/irq.c
index 0b37dde..903dad8 100644
--- a/arch/microblaze/kernel/irq.c
+++ b/arch/microblaze/kernel/irq.c
@@ -20,10 +20,29 @@
 #include <linux/irqchip.h>
 #include <linux/of_irq.h>
 
+static u32 concurrent_irq;
+
 void __irq_entry do_IRQ(struct pt_regs *regs)
 {
+	unsigned int irq;
+	struct pt_regs *old_regs = set_irq_regs(regs);
 	trace_hardirqs_off();
-	handle_arch_irq(regs);
+
+	irq_enter();
+	irq = xintc_get_irq();
+next_irq:
+	BUG_ON(!irq);
+	generic_handle_irq(irq);
+
+	irq = xintc_get_irq();
+	if (irq != -1U) {
+		pr_debug("next irq: %d\n", irq);
+		++concurrent_irq;
+		goto next_irq;
+	}
+
+	irq_exit();
+	set_irq_regs(old_regs);
 	trace_hardirqs_on();
 }
 
diff --git a/arch/microblaze/kernel/syscalls/syscallhdr.sh b/arch/microblaze/kernel/syscalls/syscallhdr.sh
index 2e9062a..a914854 100644
--- a/arch/microblaze/kernel/syscalls/syscallhdr.sh
+++ b/arch/microblaze/kernel/syscalls/syscallhdr.sh
@@ -32,5 +32,5 @@
 	printf "#define __NR_syscalls\t%s\n" "${nxt}"
 	printf "#endif\n"
 	printf "\n"
-	printf "#endif /* %s */" "${fileguard}"
+	printf "#endif /* %s */\n" "${fileguard}"
 ) > "$out"
diff --git a/arch/microblaze/mm/consistent.c b/arch/microblaze/mm/consistent.c
index 8c5f0c3..e09b66e 100644
--- a/arch/microblaze/mm/consistent.c
+++ b/arch/microblaze/mm/consistent.c
@@ -40,7 +40,7 @@ void arch_dma_prep_coherent(struct page *page, size_t size)
 #define UNCACHED_SHADOW_MASK 0
 #endif /* CONFIG_XILINX_UNCACHED_SHADOW */
 
-void *uncached_kernel_address(void *ptr)
+void *arch_dma_set_uncached(void *ptr, size_t size)
 {
 	unsigned long addr = (unsigned long)ptr;
 
@@ -49,11 +49,4 @@ void *uncached_kernel_address(void *ptr)
 		pr_warn("ERROR: Your cache coherent area is CACHED!!!\n");
 	return (void *)addr;
 }
-
-void *cached_kernel_address(void *ptr)
-{
-	unsigned long addr = (unsigned long)ptr;
-
-	return (void *)(addr & ~UNCACHED_SHADOW_MASK);
-}
 #endif /* CONFIG_MMU */
diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c
index 58cc496..60a58c0 100644
--- a/arch/microblaze/pci/pci-common.c
+++ b/arch/microblaze/pci/pci-common.c
@@ -433,10 +433,6 @@ void pci_process_bridge_OF_ranges(struct pci_controller *hose,
 	pr_debug("Parsing ranges property...\n");
 	for_each_of_pci_range(&parser, &range) {
 		/* Read next ranges element */
-		pr_debug("pci_space: 0x%08x pci_addr:0x%016llx ",
-				range.pci_space, range.pci_addr);
-		pr_debug("cpu_addr:0x%016llx size:0x%016llx\n",
-					range.cpu_addr, range.size);
 
 		/* If we failed translation or got a zero-sized region
 		 * (some FW try to feed us with non sensical zero sized regions
@@ -486,7 +482,7 @@ void pci_process_bridge_OF_ranges(struct pci_controller *hose,
 			pr_info(" MEM 0x%016llx..0x%016llx -> 0x%016llx %s\n",
 				range.cpu_addr, range.cpu_addr + range.size - 1,
 				range.pci_addr,
-				(range.pci_space & 0x40000000) ?
+				(range.flags & IORESOURCE_PREFETCH) ?
 				"Prefetch" : "");
 
 			/* We support only 3 memory ranges */
@@ -1121,4 +1117,3 @@ int early_find_capability(struct pci_controller *hose, int bus, int devfn,
 {
 	return pci_bus_find_capability(fake_pci_bus(hose, bus), devfn, cap);
 }
-
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index f8f3dbd..690718b 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1192,8 +1192,9 @@
 	# significant advantages.
 	#
 	select ARCH_HAS_DMA_WRITE_COMBINE
+	select ARCH_HAS_DMA_PREP_COHERENT
 	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
-	select ARCH_HAS_UNCACHED_SEGMENT
+	select ARCH_HAS_DMA_SET_UNCACHED
 	select DMA_NONCOHERENT_MMAP
 	select DMA_NONCOHERENT_CACHE_SYNC
 	select NEED_DMA_MAP_STATE
diff --git a/arch/mips/boot/.gitignore b/arch/mips/boot/.gitignore
index a73d6e2..2adc858 100644
--- a/arch/mips/boot/.gitignore
+++ b/arch/mips/boot/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 mkboot
 elf2ecoff
 vmlinux.*
diff --git a/arch/mips/boot/compressed/.gitignore b/arch/mips/boot/compressed/.gitignore
index ebae133..d358395 100644
--- a/arch/mips/boot/compressed/.gitignore
+++ b/arch/mips/boot/compressed/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 ashldi3.c
 bswapsi.c
diff --git a/arch/mips/boot/dts/brcm/bcm7425.dtsi b/arch/mips/boot/dts/brcm/bcm7425.dtsi
index 410e61e..aa0b2d3 100644
--- a/arch/mips/boot/dts/brcm/bcm7425.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7425.dtsi
@@ -403,8 +403,8 @@ nand: nand@41b800 {
 			compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg-names = "nand";
-			reg = <0x41b800 0x400>;
+			reg-names = "nand", "flash-edu";
+			reg = <0x41b800 0x400>, <0x41bc00 0x24>;
 			interrupt-parent = <&hif_l2_intc>;
 			interrupts = <24>;
 			status = "disabled";
diff --git a/arch/mips/boot/tools/.gitignore b/arch/mips/boot/tools/.gitignore
index be0ed06..d36dc7c 100644
--- a/arch/mips/boot/tools/.gitignore
+++ b/arch/mips/boot/tools/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 relocs
diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig
index f14ad05..eea9b61 100644
--- a/arch/mips/configs/bigsur_defconfig
+++ b/arch/mips/configs/bigsur_defconfig
@@ -112,7 +112,6 @@
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
 CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 CONFIG_CHR_DEV_SCH=m
 CONFIG_ATA=y
diff --git a/arch/mips/configs/fuloong2e_defconfig b/arch/mips/configs/fuloong2e_defconfig
index 1788ae2..6466e83 100644
--- a/arch/mips/configs/fuloong2e_defconfig
+++ b/arch/mips/configs/fuloong2e_defconfig
@@ -99,7 +99,6 @@
 CONFIG_ATA_OVER_ETH=m
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_LOWLEVEL is not set
diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig
index 82d942a..638d7cf 100644
--- a/arch/mips/configs/ip27_defconfig
+++ b/arch/mips/configs/ip27_defconfig
@@ -99,7 +99,6 @@
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
 CONFIG_BLK_DEV_SR=m
-CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 CONFIG_CHR_DEV_SCH=m
 CONFIG_SCSI_CONSTANTS=y
diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig
index 3708840..7b1fab5 100644
--- a/arch/mips/configs/ip32_defconfig
+++ b/arch/mips/configs/ip32_defconfig
@@ -50,7 +50,6 @@
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
diff --git a/arch/mips/configs/jazz_defconfig b/arch/mips/configs/jazz_defconfig
index 92085df..8c22303 100644
--- a/arch/mips/configs/jazz_defconfig
+++ b/arch/mips/configs/jazz_defconfig
@@ -42,7 +42,6 @@
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
 CONFIG_BLK_DEV_SR=m
-CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SCAN_ASYNC=y
 CONFIG_ISCSI_TCP=m
diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig
index 59eedf5..211bd3d 100644
--- a/arch/mips/configs/malta_defconfig
+++ b/arch/mips/configs/malta_defconfig
@@ -239,7 +239,6 @@
 CONFIG_CHR_DEV_ST=m
 CONFIG_CHR_DEV_OSST=m
 CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
diff --git a/arch/mips/configs/malta_kvm_defconfig b/arch/mips/configs/malta_kvm_defconfig
index 8ef6125..62b1969 100644
--- a/arch/mips/configs/malta_kvm_defconfig
+++ b/arch/mips/configs/malta_kvm_defconfig
@@ -247,7 +247,6 @@
 CONFIG_CHR_DEV_ST=m
 CONFIG_CHR_DEV_OSST=m
 CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
diff --git a/arch/mips/configs/malta_kvm_guest_defconfig b/arch/mips/configs/malta_kvm_guest_defconfig
index d2a008c..9185e0a 100644
--- a/arch/mips/configs/malta_kvm_guest_defconfig
+++ b/arch/mips/configs/malta_kvm_guest_defconfig
@@ -245,7 +245,6 @@
 CONFIG_CHR_DEV_ST=m
 CONFIG_CHR_DEV_OSST=m
 CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
diff --git a/arch/mips/configs/maltaup_xpa_defconfig b/arch/mips/configs/maltaup_xpa_defconfig
index 970df6d..636311d 100644
--- a/arch/mips/configs/maltaup_xpa_defconfig
+++ b/arch/mips/configs/maltaup_xpa_defconfig
@@ -245,7 +245,6 @@
 CONFIG_CHR_DEV_ST=m
 CONFIG_CHR_DEV_OSST=m
 CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig
index 2c7adea..30d7c3d 100644
--- a/arch/mips/configs/rm200_defconfig
+++ b/arch/mips/configs/rm200_defconfig
@@ -203,7 +203,6 @@
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
 CONFIG_BLK_DEV_SR=m
-CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SCAN_ASYNC=y
 CONFIG_SCSI_FC_ATTRS=y
diff --git a/arch/mips/fw/arc/memory.c b/arch/mips/fw/arc/memory.c
index dbbcddc..89fa6e6 100644
--- a/arch/mips/fw/arc/memory.c
+++ b/arch/mips/fw/arc/memory.c
@@ -117,7 +117,7 @@ static int __init prom_memtype_classify(union linux_memtypes type)
 	return memtype_classify_arc(type);
 }
 
-void __init prom_meminit(void)
+void __weak __init prom_meminit(void)
 {
 	struct linux_mdesc *p;
 
@@ -162,7 +162,7 @@ void __weak __init prom_cleanup(void)
 {
 }
 
-void __init prom_free_prom_memory(void)
+void __weak __init prom_free_prom_memory(void)
 {
 	int i;
 
diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h
index 0ba4ce6..e2f503f 100644
--- a/arch/mips/include/asm/page.h
+++ b/arch/mips/include/asm/page.h
@@ -253,10 +253,7 @@ extern bool __virt_addr_valid(const volatile void *kaddr);
 #define virt_addr_valid(kaddr)						\
 	__virt_addr_valid((const volatile void *) (kaddr))
 
-#define VM_DATA_DEFAULT_FLAGS \
-	(VM_READ | VM_WRITE | \
-	 ((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0) | \
-	 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+#define VM_DATA_DEFAULT_FLAGS	VM_DATA_FLAGS_TSK_EXEC
 
 #include <asm-generic/memory_model.h>
 #include <asm-generic/getorder.h>
diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h
index aef5378f..f1801e7 100644
--- a/arch/mips/include/asm/pgtable.h
+++ b/arch/mips/include/asm/pgtable.h
@@ -270,6 +270,36 @@ static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
 extern pgd_t swapper_pg_dir[];
 
 /*
+ * Platform specific pte_special() and pte_mkspecial() definitions
+ * are required only when ARCH_HAS_PTE_SPECIAL is enabled.
+ */
+#if defined(CONFIG_ARCH_HAS_PTE_SPECIAL)
+#if defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32)
+static inline int pte_special(pte_t pte)
+{
+	return pte.pte_low & _PAGE_SPECIAL;
+}
+
+static inline pte_t pte_mkspecial(pte_t pte)
+{
+	pte.pte_low |= _PAGE_SPECIAL;
+	return pte;
+}
+#else
+static inline int pte_special(pte_t pte)
+{
+	return pte_val(pte) & _PAGE_SPECIAL;
+}
+
+static inline pte_t pte_mkspecial(pte_t pte)
+{
+	pte_val(pte) |= _PAGE_SPECIAL;
+	return pte;
+}
+#endif
+#endif /* CONFIG_ARCH_HAS_PTE_SPECIAL */
+
+/*
  * The following only work if pte_present() is true.
  * Undefined behaviour if not..
  */
@@ -277,7 +307,6 @@ extern pgd_t swapper_pg_dir[];
 static inline int pte_write(pte_t pte)	{ return pte.pte_low & _PAGE_WRITE; }
 static inline int pte_dirty(pte_t pte)	{ return pte.pte_low & _PAGE_MODIFIED; }
 static inline int pte_young(pte_t pte)	{ return pte.pte_low & _PAGE_ACCESSED; }
-static inline int pte_special(pte_t pte) { return pte.pte_low & _PAGE_SPECIAL; }
 
 static inline pte_t pte_wrprotect(pte_t pte)
 {
@@ -338,17 +367,10 @@ static inline pte_t pte_mkyoung(pte_t pte)
 	}
 	return pte;
 }
-
-static inline pte_t pte_mkspecial(pte_t pte)
-{
-	pte.pte_low |= _PAGE_SPECIAL;
-	return pte;
-}
 #else
 static inline int pte_write(pte_t pte)	{ return pte_val(pte) & _PAGE_WRITE; }
 static inline int pte_dirty(pte_t pte)	{ return pte_val(pte) & _PAGE_MODIFIED; }
 static inline int pte_young(pte_t pte)	{ return pte_val(pte) & _PAGE_ACCESSED; }
-static inline int pte_special(pte_t pte) { return pte_val(pte) & _PAGE_SPECIAL; }
 
 static inline pte_t pte_wrprotect(pte_t pte)
 {
@@ -392,12 +414,6 @@ static inline pte_t pte_mkyoung(pte_t pte)
 	return pte;
 }
 
-static inline pte_t pte_mkspecial(pte_t pte)
-{
-	pte_val(pte) |= _PAGE_SPECIAL;
-	return pte;
-}
-
 #ifdef CONFIG_MIPS_HUGE_TLB_SUPPORT
 static inline int pte_huge(pte_t pte)	{ return pte_val(pte) & _PAGE_HUGE; }
 
diff --git a/arch/mips/kernel/.gitignore b/arch/mips/kernel/.gitignore
index c5f676c..bbb90f9 100644
--- a/arch/mips/kernel/.gitignore
+++ b/arch/mips/kernel/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 vmlinux.lds
diff --git a/arch/mips/kernel/syscalls/syscallhdr.sh b/arch/mips/kernel/syscalls/syscallhdr.sh
index d2bcfa8..2e241e7 100644
--- a/arch/mips/kernel/syscalls/syscallhdr.sh
+++ b/arch/mips/kernel/syscalls/syscallhdr.sh
@@ -32,6 +32,5 @@
 	printf "#define __NR_syscalls\t%s\n" "${nxt}"
 	printf "#endif\n"
 	printf "\n"
-	printf "#endif /* %s */" "${fileguard}"
-	printf "\n"
+	printf "#endif /* %s */\n" "${fileguard}"
 ) > "$out"
diff --git a/arch/mips/kvm/Kconfig b/arch/mips/kvm/Kconfig
index eac25ae..b91d145 100644
--- a/arch/mips/kvm/Kconfig
+++ b/arch/mips/kvm/Kconfig
@@ -72,6 +72,4 @@
 
 	  If unsure, say N.
 
-source "drivers/vhost/Kconfig"
-
 endif # VIRTUALIZATION
diff --git a/arch/mips/mm/dma-noncoherent.c b/arch/mips/mm/dma-noncoherent.c
index dc42ffc..fcea92d 100644
--- a/arch/mips/mm/dma-noncoherent.c
+++ b/arch/mips/mm/dma-noncoherent.c
@@ -49,16 +49,11 @@ void arch_dma_prep_coherent(struct page *page, size_t size)
 	dma_cache_wback_inv((unsigned long)page_address(page), size);
 }
 
-void *uncached_kernel_address(void *addr)
+void *arch_dma_set_uncached(void *addr, size_t size)
 {
 	return (void *)(__pa(addr) + UNCAC_BASE);
 }
 
-void *cached_kernel_address(void *addr)
-{
-	return __va(addr) - UNCAC_BASE;
-}
-
 static inline void dma_sync_virt(void *addr, size_t size,
 		enum dma_data_direction dir)
 {
diff --git a/arch/mips/mm/fault.c b/arch/mips/mm/fault.c
index 4a0eafe..f8d62cd 100644
--- a/arch/mips/mm/fault.c
+++ b/arch/mips/mm/fault.c
@@ -142,7 +142,7 @@ static void __kprobes __do_page_fault(struct pt_regs *regs, unsigned long write,
 				goto bad_area;
 			}
 		} else {
-			if (!(vma->vm_flags & (VM_READ | VM_WRITE | VM_EXEC)))
+			if (unlikely(!vma_is_accessible(vma)))
 				goto bad_area;
 		}
 	}
diff --git a/arch/mips/tools/.gitignore b/arch/mips/tools/.gitignore
index b020945..794817d 100644
--- a/arch/mips/tools/.gitignore
+++ b/arch/mips/tools/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 elf-entry
 loongson3-llsc-check
diff --git a/arch/mips/vdso/.gitignore b/arch/mips/vdso/.gitignore
index 5286a7d..1f43f6d 100644
--- a/arch/mips/vdso/.gitignore
+++ b/arch/mips/vdso/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 *.so*
 vdso-*image.c
 genvdso
diff --git a/arch/nds32/include/asm/page.h b/arch/nds32/include/asm/page.h
index 86b3201..add33a7 100644
--- a/arch/nds32/include/asm/page.h
+++ b/arch/nds32/include/asm/page.h
@@ -59,9 +59,6 @@ typedef struct page *pgtable_t;
 
 #endif /* !__ASSEMBLY__ */
 
-#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
-				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
 #endif /* __KERNEL__ */
 
 #endif
diff --git a/arch/nds32/include/asm/pgtable.h b/arch/nds32/include/asm/pgtable.h
index 6abc58a..476cc4d 100644
--- a/arch/nds32/include/asm/pgtable.h
+++ b/arch/nds32/include/asm/pgtable.h
@@ -286,15 +286,6 @@ PTE_BIT_FUNC(mkclean, &=~_PAGE_D);
 PTE_BIT_FUNC(mkdirty, |=_PAGE_D);
 PTE_BIT_FUNC(mkold, &=~_PAGE_YOUNG);
 PTE_BIT_FUNC(mkyoung, |=_PAGE_YOUNG);
-static inline int pte_special(pte_t pte)
-{
-	return 0;
-}
-
-static inline pte_t pte_mkspecial(pte_t pte)
-{
-	return pte;
-}
 
 /*
  * Mark the prot value as uncacheable and unbufferable.
diff --git a/arch/nds32/kernel/.gitignore b/arch/nds32/kernel/.gitignore
index c5f676c..bbb90f9 100644
--- a/arch/nds32/kernel/.gitignore
+++ b/arch/nds32/kernel/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 vmlinux.lds
diff --git a/arch/nds32/kernel/vdso/.gitignore b/arch/nds32/kernel/vdso/.gitignore
index f8b69d8..652e31d 100644
--- a/arch/nds32/kernel/vdso/.gitignore
+++ b/arch/nds32/kernel/vdso/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 vdso.lds
diff --git a/arch/nds32/kernel/vmlinux.lds.S b/arch/nds32/kernel/vmlinux.lds.S
index f679d33..7a6c1ce 100644
--- a/arch/nds32/kernel/vmlinux.lds.S
+++ b/arch/nds32/kernel/vmlinux.lds.S
@@ -47,6 +47,7 @@
 		LOCK_TEXT
 		KPROBES_TEXT
 		IRQENTRY_TEXT
+		SOFTIRQENTRY_TEXT
 		*(.fixup)
 	}
 
diff --git a/arch/nds32/mm/fault.c b/arch/nds32/mm/fault.c
index 0cf0c08..f331e53 100644
--- a/arch/nds32/mm/fault.c
+++ b/arch/nds32/mm/fault.c
@@ -79,7 +79,7 @@ void do_page_fault(unsigned long entry, unsigned long addr,
 	struct vm_area_struct *vma;
 	int si_code;
 	vm_fault_t fault;
-	unsigned int mask = VM_READ | VM_WRITE | VM_EXEC;
+	unsigned int mask = VM_ACCESS_FLAGS;
 	unsigned int flags = FAULT_FLAG_DEFAULT;
 
 	error_code = error_code & (ITYPE_mskINST | ITYPE_mskETYPE);
diff --git a/arch/nios2/Kconfig b/arch/nios2/Kconfig
index 44b5da3..c664514 100644
--- a/arch/nios2/Kconfig
+++ b/arch/nios2/Kconfig
@@ -2,10 +2,12 @@
 config NIOS2
 	def_bool y
 	select ARCH_32BIT_OFF_T
+	select ARCH_HAS_DMA_PREP_COHERENT
 	select ARCH_HAS_SYNC_DMA_FOR_CPU
 	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
-	select ARCH_HAS_UNCACHED_SEGMENT
+	select ARCH_HAS_DMA_SET_UNCACHED
 	select ARCH_NO_SWAP
+	select COMMON_CLK
 	select TIMER_OF
 	select GENERIC_ATOMIC64
 	select GENERIC_CLOCKEVENTS
diff --git a/arch/nios2/boot/.gitignore b/arch/nios2/boot/.gitignore
index 64386a8..ef37cac 100644
--- a/arch/nios2/boot/.gitignore
+++ b/arch/nios2/boot/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 vmImage
diff --git a/arch/nios2/boot/dts/10m50_devboard.dts b/arch/nios2/boot/dts/10m50_devboard.dts
index 5e4ab03..56339be 100644
--- a/arch/nios2/boot/dts/10m50_devboard.dts
+++ b/arch/nios2/boot/dts/10m50_devboard.dts
@@ -179,8 +179,7 @@ sys_clk_timer: timer@18001440 {
 		led_pio: gpio@180014d0 {
 			compatible = "altr,pio-1.0";
 			reg = <0x180014d0 0x00000010>;
-			altr,gpio-bank-width = <4>;
-			resetvalue = <15>;
+			altr,ngpio = <4>;
 			#gpio-cells = <2>;
 			gpio-controller;
 		};
@@ -190,11 +189,10 @@ button_pio: gpio@180014c0 {
 			reg = <0x180014c0 0x00000010>;
 			interrupt-parent = <&cpu>;
 			interrupts = <6>;
-			altr,gpio-bank-width = <3>;
+			altr,ngpio = <3>;
 			altr,interrupt-type = <2>;
 			edge_type = <1>;
 			level_trigger = <0>;
-			resetvalue = <0>;
 			#gpio-cells = <2>;
 			gpio-controller;
 		};
diff --git a/arch/nios2/include/asm/page.h b/arch/nios2/include/asm/page.h
index 79fcac6..6a98981 100644
--- a/arch/nios2/include/asm/page.h
+++ b/arch/nios2/include/asm/page.h
@@ -98,8 +98,7 @@ static inline bool pfn_valid(unsigned long pfn)
 # define virt_to_page(vaddr)	pfn_to_page(PFN_DOWN(virt_to_phys(vaddr)))
 # define virt_addr_valid(vaddr)	pfn_valid(PFN_DOWN(virt_to_phys(vaddr)))
 
-# define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | \
-				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+# define VM_DATA_DEFAULT_FLAGS	VM_DATA_FLAGS_NON_EXEC
 
 #include <asm-generic/memory_model.h>
 
diff --git a/arch/nios2/include/asm/pgtable.h b/arch/nios2/include/asm/pgtable.h
index 99985d8..f98b7f4 100644
--- a/arch/nios2/include/asm/pgtable.h
+++ b/arch/nios2/include/asm/pgtable.h
@@ -113,7 +113,6 @@ static inline int pte_dirty(pte_t pte)		\
 	{ return pte_val(pte) & _PAGE_DIRTY; }
 static inline int pte_young(pte_t pte)		\
 	{ return pte_val(pte) & _PAGE_ACCESSED; }
-static inline int pte_special(pte_t pte)	{ return 0; }
 
 #define pgprot_noncached pgprot_noncached
 
@@ -168,8 +167,6 @@ static inline pte_t pte_mkdirty(pte_t pte)
 	return pte;
 }
 
-static inline pte_t pte_mkspecial(pte_t pte)	{ return pte; }
-
 static inline pte_t pte_mkyoung(pte_t pte)
 {
 	pte_val(pte) |= _PAGE_ACCESSED;
diff --git a/arch/nios2/kernel/.gitignore b/arch/nios2/kernel/.gitignore
index c5f676c..bbb90f9 100644
--- a/arch/nios2/kernel/.gitignore
+++ b/arch/nios2/kernel/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 vmlinux.lds
diff --git a/arch/nios2/mm/dma-mapping.c b/arch/nios2/mm/dma-mapping.c
index 0ed711e..fd887d5 100644
--- a/arch/nios2/mm/dma-mapping.c
+++ b/arch/nios2/mm/dma-mapping.c
@@ -67,7 +67,7 @@ void arch_dma_prep_coherent(struct page *page, size_t size)
 	flush_dcache_range(start, start + size);
 }
 
-void *uncached_kernel_address(void *ptr)
+void *arch_dma_set_uncached(void *ptr, size_t size)
 {
 	unsigned long addr = (unsigned long)ptr;
 
@@ -75,13 +75,3 @@ void *uncached_kernel_address(void *ptr)
 
 	return (void *)ptr;
 }
-
-void *cached_kernel_address(void *ptr)
-{
-	unsigned long addr = (unsigned long)ptr;
-
-	addr &= ~CONFIG_NIOS2_IO_REGION_BASE;
-	addr |= CONFIG_NIOS2_KERNEL_REGION_BASE;
-
-	return (void *)ptr;
-}
diff --git a/arch/nios2/platform/platform.c b/arch/nios2/platform/platform.c
index 2a35154..9737a87 100644
--- a/arch/nios2/platform/platform.c
+++ b/arch/nios2/platform/platform.c
@@ -15,6 +15,12 @@
 #include <linux/slab.h>
 #include <linux/sys_soc.h>
 #include <linux/io.h>
+#include <linux/clk-provider.h>
+
+static const struct of_device_id clk_match[] __initconst = {
+	{ .compatible = "fixed-clock", .data = of_fixed_clk_setup, },
+	{}
+};
 
 static int __init nios2_soc_device_init(void)
 {
@@ -38,6 +44,8 @@ static int __init nios2_soc_device_init(void)
 		}
 	}
 
+	of_clk_init(clk_match);
+
 	return 0;
 }
 
diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig
index 1928e061..8588996 100644
--- a/arch/openrisc/Kconfig
+++ b/arch/openrisc/Kconfig
@@ -7,6 +7,8 @@
 config OPENRISC
 	def_bool y
 	select ARCH_32BIT_OFF_T
+	select ARCH_HAS_DMA_SET_UNCACHED
+	select ARCH_HAS_DMA_CLEAR_UNCACHED
 	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
 	select OF
 	select OF_EARLY_FLATTREE
@@ -14,6 +16,7 @@
 	select HANDLE_DOMAIN_IRQ
 	select GPIOLIB
 	select HAVE_ARCH_TRACEHOOK
+	select HAVE_COPY_THREAD_TLS
 	select SPARSE_IRQ
 	select GENERIC_IRQ_CHIP
 	select GENERIC_IRQ_PROBE
diff --git a/arch/openrisc/configs/or1ksim_defconfig b/arch/openrisc/configs/or1ksim_defconfig
index d8ff4f8..75f2da3 100644
--- a/arch/openrisc/configs/or1ksim_defconfig
+++ b/arch/openrisc/configs/or1ksim_defconfig
@@ -1,4 +1,3 @@
-CONFIG_CROSS_COMPILE="or1k-linux-"
 CONFIG_NO_HZ=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/openrisc/configs/simple_smp_defconfig b/arch/openrisc/configs/simple_smp_defconfig
index 6427899..ff49d86 100644
--- a/arch/openrisc/configs/simple_smp_defconfig
+++ b/arch/openrisc/configs/simple_smp_defconfig
@@ -1,4 +1,3 @@
-CONFIG_CROSS_COMPILE="or1k-linux-"
 CONFIG_LOCALVERSION="-simple-smp"
 CONFIG_NO_HZ=y
 CONFIG_LOG_BUF_SHIFT=14
diff --git a/arch/openrisc/include/asm/page.h b/arch/openrisc/include/asm/page.h
index 01069db..aab6e64 100644
--- a/arch/openrisc/include/asm/page.h
+++ b/arch/openrisc/include/asm/page.h
@@ -86,11 +86,6 @@ typedef struct page *pgtable_t;
 
 #endif /* __ASSEMBLY__ */
 
-
-#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
-				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
-
 #include <asm-generic/memory_model.h>
 #include <asm-generic/getorder.h>
 
diff --git a/arch/openrisc/include/asm/pgtable.h b/arch/openrisc/include/asm/pgtable.h
index 248d22d..7f3fb9c 100644
--- a/arch/openrisc/include/asm/pgtable.h
+++ b/arch/openrisc/include/asm/pgtable.h
@@ -236,8 +236,6 @@ static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_WRITE; }
 static inline int pte_exec(pte_t pte)  { return pte_val(pte) & _PAGE_EXEC; }
 static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; }
 static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; }
-static inline int pte_special(pte_t pte) { return 0; }
-static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
 
 static inline pte_t pte_wrprotect(pte_t pte)
 {
diff --git a/arch/openrisc/include/uapi/asm/unistd.h b/arch/openrisc/include/uapi/asm/unistd.h
index 566f8c4..fae34c6 100644
--- a/arch/openrisc/include/uapi/asm/unistd.h
+++ b/arch/openrisc/include/uapi/asm/unistd.h
@@ -24,6 +24,7 @@
 #define __ARCH_WANT_SET_GET_RLIMIT
 #define __ARCH_WANT_SYS_FORK
 #define __ARCH_WANT_SYS_CLONE
+#define __ARCH_WANT_SYS_CLONE3
 #define __ARCH_WANT_TIME32_SYSCALLS
 
 #include <asm-generic/unistd.h>
diff --git a/arch/openrisc/kernel/.gitignore b/arch/openrisc/kernel/.gitignore
index c5f676c..bbb90f9 100644
--- a/arch/openrisc/kernel/.gitignore
+++ b/arch/openrisc/kernel/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 vmlinux.lds
diff --git a/arch/openrisc/kernel/dma.c b/arch/openrisc/kernel/dma.c
index adec711..c152a68 100644
--- a/arch/openrisc/kernel/dma.c
+++ b/arch/openrisc/kernel/dma.c
@@ -11,8 +11,6 @@
  * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
  *
  * DMA mapping callbacks...
- * As alloc_coherent is the only DMA callback being used currently, that's
- * the only thing implemented properly.  The rest need looking into...
  */
 
 #include <linux/dma-noncoherent.h>
@@ -67,62 +65,29 @@ static const struct mm_walk_ops clear_nocache_walk_ops = {
 	.pte_entry		= page_clear_nocache,
 };
 
-/*
- * Alloc "coherent" memory, which for OpenRISC means simply uncached.
- *
- * This function effectively just calls __get_free_pages, sets the
- * cache-inhibit bit on those pages, and makes sure that the pages are
- * flushed out of the cache before they are used.
- *
- * If the NON_CONSISTENT attribute is set, then this function just
- * returns "normal", cachable memory.
- *
- * There are additional flags WEAK_ORDERING and WRITE_COMBINE to take
- * into consideration here, too.  All current known implementations of
- * the OR1K support only strongly ordered memory accesses, so that flag
- * is being ignored for now; uncached but write-combined memory is a
- * missing feature of the OR1K.
- */
-void *
-arch_dma_alloc(struct device *dev, size_t size, dma_addr_t *dma_handle,
-		gfp_t gfp, unsigned long attrs)
+void *arch_dma_set_uncached(void *cpu_addr, size_t size)
 {
-	unsigned long va;
-	void *page;
-
-	page = alloc_pages_exact(size, gfp | __GFP_ZERO);
-	if (!page)
-		return NULL;
-
-	/* This gives us the real physical address of the first page. */
-	*dma_handle = __pa(page);
-
-	va = (unsigned long)page;
+	unsigned long va = (unsigned long)cpu_addr;
+	int error;
 
 	/*
 	 * We need to iterate through the pages, clearing the dcache for
 	 * them and setting the cache-inhibit bit.
 	 */
-	if (walk_page_range(&init_mm, va, va + size, &set_nocache_walk_ops,
-			NULL)) {
-		free_pages_exact(page, size);
-		return NULL;
-	}
-
-	return (void *)va;
+	error = walk_page_range(&init_mm, va, va + size, &set_nocache_walk_ops,
+			NULL);
+	if (error)
+		return ERR_PTR(error);
+	return cpu_addr;
 }
 
-void
-arch_dma_free(struct device *dev, size_t size, void *vaddr,
-		dma_addr_t dma_handle, unsigned long attrs)
+void arch_dma_clear_uncached(void *cpu_addr, size_t size)
 {
-	unsigned long va = (unsigned long)vaddr;
+	unsigned long va = (unsigned long)cpu_addr;
 
 	/* walk_page_range shouldn't be able to fail here */
 	WARN_ON(walk_page_range(&init_mm, va, va + size,
 			&clear_nocache_walk_ops, NULL));
-
-	free_pages_exact(vaddr, size);
 }
 
 void arch_sync_dma_for_device(phys_addr_t addr, size_t size,
diff --git a/arch/openrisc/kernel/process.c b/arch/openrisc/kernel/process.c
index b06f84f..6bcdca4 100644
--- a/arch/openrisc/kernel/process.c
+++ b/arch/openrisc/kernel/process.c
@@ -117,12 +117,12 @@ void release_thread(struct task_struct *dead_task)
 extern asmlinkage void ret_from_fork(void);
 
 /*
- * copy_thread
+ * copy_thread_tls
  * @clone_flags: flags
  * @usp: user stack pointer or fn for kernel thread
  * @arg: arg to fn for kernel thread; always NULL for userspace thread
  * @p: the newly created task
- * @regs: CPU context to copy for userspace thread; always NULL for kthread
+ * @tls: the Thread Local Storage pointer for the new process
  *
  * At the top of a newly initialized kernel stack are two stacked pt_reg
  * structures.  The first (topmost) is the userspace context of the thread.
@@ -148,8 +148,8 @@ extern asmlinkage void ret_from_fork(void);
  */
 
 int
-copy_thread(unsigned long clone_flags, unsigned long usp,
-	    unsigned long arg, struct task_struct *p)
+copy_thread_tls(unsigned long clone_flags, unsigned long usp,
+		unsigned long arg, struct task_struct *p, unsigned long tls)
 {
 	struct pt_regs *userregs;
 	struct pt_regs *kregs;
@@ -179,16 +179,10 @@ copy_thread(unsigned long clone_flags, unsigned long usp,
 			userregs->sp = usp;
 
 		/*
-		 * For CLONE_SETTLS set "tp" (r10) to the TLS pointer passed to sys_clone.
-		 *
-		 * The kernel entry is:
-		 *	int clone (long flags, void *child_stack, int *parent_tid,
-		 *		int *child_tid, struct void *tls)
-		 *
-		 * This makes the source r7 in the kernel registers.
+		 * For CLONE_SETTLS set "tp" (r10) to the TLS pointer.
 		 */
 		if (clone_flags & CLONE_SETTLS)
-			userregs->gpr[10] = userregs->gpr[7];
+			userregs->gpr[10] = tls;
 
 		userregs->gpr[11] = 0;	/* Result from fork() */
 
diff --git a/arch/openrisc/kernel/smp.c b/arch/openrisc/kernel/smp.c
index 7d518ee..bd1e660 100644
--- a/arch/openrisc/kernel/smp.c
+++ b/arch/openrisc/kernel/smp.c
@@ -14,6 +14,7 @@
 #include <linux/smp.h>
 #include <linux/cpu.h>
 #include <linux/sched.h>
+#include <linux/sched/mm.h>
 #include <linux/irq.h>
 #include <asm/cpuinfo.h>
 #include <asm/mmu_context.h>
@@ -113,7 +114,7 @@ asmlinkage __init void secondary_start_kernel(void)
 	 * All kernel threads share the same mm context; grab a
 	 * reference and switch to it.
 	 */
-	atomic_inc(&mm->mm_count);
+	mmgrab(mm);
 	current->active_mm = mm;
 	cpumask_set_cpu(cpu, mm_cpumask(mm));
 
diff --git a/arch/openrisc/kernel/traps.c b/arch/openrisc/kernel/traps.c
index 932a8ec..c11aa2e 100644
--- a/arch/openrisc/kernel/traps.c
+++ b/arch/openrisc/kernel/traps.c
@@ -55,13 +55,6 @@ void show_stack(struct task_struct *task, unsigned long *esp)
 	unwind_stack(NULL, esp, print_trace);
 }
 
-void show_trace_task(struct task_struct *tsk)
-{
-	/*
-	 * TODO: SysRq-T trace dump...
-	 */
-}
-
 void show_registers(struct pt_regs *regs)
 {
 	int i;
diff --git a/arch/parisc/boot/.gitignore b/arch/parisc/boot/.gitignore
index 017d591..adf2ae0 100644
--- a/arch/parisc/boot/.gitignore
+++ b/arch/parisc/boot/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 image
 bzImage
diff --git a/arch/parisc/boot/compressed/.gitignore b/arch/parisc/boot/compressed/.gitignore
index 926cd41..b9853a3 100644
--- a/arch/parisc/boot/compressed/.gitignore
+++ b/arch/parisc/boot/compressed/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 firmware.c
 real2.S
 sizes.h
diff --git a/arch/parisc/include/asm/page.h b/arch/parisc/include/asm/page.h
index 796ae29..6b3f674 100644
--- a/arch/parisc/include/asm/page.h
+++ b/arch/parisc/include/asm/page.h
@@ -180,9 +180,6 @@ extern int npmem_ranges;
 #define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
 #define virt_to_page(kaddr)     pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
 
-#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
-				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
 #include <asm-generic/memory_model.h>
 #include <asm-generic/getorder.h>
 #include <asm/pdc.h>
diff --git a/arch/parisc/include/asm/pgtable.h b/arch/parisc/include/asm/pgtable.h
index f0a3659..9832c73 100644
--- a/arch/parisc/include/asm/pgtable.h
+++ b/arch/parisc/include/asm/pgtable.h
@@ -377,7 +377,6 @@ static inline void pud_clear(pud_t *pud) {
 static inline int pte_dirty(pte_t pte)		{ return pte_val(pte) & _PAGE_DIRTY; }
 static inline int pte_young(pte_t pte)		{ return pte_val(pte) & _PAGE_ACCESSED; }
 static inline int pte_write(pte_t pte)		{ return pte_val(pte) & _PAGE_WRITE; }
-static inline int pte_special(pte_t pte)	{ return 0; }
 
 static inline pte_t pte_mkclean(pte_t pte)	{ pte_val(pte) &= ~_PAGE_DIRTY; return pte; }
 static inline pte_t pte_mkold(pte_t pte)	{ pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
@@ -385,7 +384,6 @@ static inline pte_t pte_wrprotect(pte_t pte)	{ pte_val(pte) &= ~_PAGE_WRITE; ret
 static inline pte_t pte_mkdirty(pte_t pte)	{ pte_val(pte) |= _PAGE_DIRTY; return pte; }
 static inline pte_t pte_mkyoung(pte_t pte)	{ pte_val(pte) |= _PAGE_ACCESSED; return pte; }
 static inline pte_t pte_mkwrite(pte_t pte)	{ pte_val(pte) |= _PAGE_WRITE; return pte; }
-static inline pte_t pte_mkspecial(pte_t pte)	{ return pte; }
 
 /*
  * Huge pte definitions.
diff --git a/arch/parisc/include/asm/spinlock.h b/arch/parisc/include/asm/spinlock.h
index 197d224..70fecb8 100644
--- a/arch/parisc/include/asm/spinlock.h
+++ b/arch/parisc/include/asm/spinlock.h
@@ -10,25 +10,34 @@
 static inline int arch_spin_is_locked(arch_spinlock_t *x)
 {
 	volatile unsigned int *a = __ldcw_align(x);
+	smp_mb();
 	return *a == 0;
 }
 
-#define arch_spin_lock(lock) arch_spin_lock_flags(lock, 0)
-
-static inline void arch_spin_lock_flags(arch_spinlock_t *x,
-					 unsigned long flags)
+static inline void arch_spin_lock(arch_spinlock_t *x)
 {
 	volatile unsigned int *a;
 
 	a = __ldcw_align(x);
 	while (__ldcw(a) == 0)
 		while (*a == 0)
-			if (flags & PSW_SM_I) {
-				local_irq_enable();
-				cpu_relax();
-				local_irq_disable();
-			} else
-				cpu_relax();
+			cpu_relax();
+}
+
+static inline void arch_spin_lock_flags(arch_spinlock_t *x,
+					 unsigned long flags)
+{
+	volatile unsigned int *a;
+	unsigned long flags_dis;
+
+	a = __ldcw_align(x);
+	while (__ldcw(a) == 0) {
+		local_save_flags(flags_dis);
+		local_irq_restore(flags);
+		while (*a == 0)
+			cpu_relax();
+		local_irq_restore(flags_dis);
+	}
 }
 #define arch_spin_lock_flags arch_spin_lock_flags
 
@@ -58,116 +67,93 @@ static inline int arch_spin_trylock(arch_spinlock_t *x)
 
 /*
  * Read-write spinlocks, allowing multiple readers but only one writer.
- * Linux rwlocks are unfair to writers; they can be starved for an indefinite
- * time by readers.  With care, they can also be taken in interrupt context.
+ * Unfair locking as Writers could be starved indefinitely by Reader(s)
  *
- * In the PA-RISC implementation, we have a spinlock and a counter.
- * Readers use the lock to serialise their access to the counter (which
- * records how many readers currently hold the lock).
- * Writers hold the spinlock, preventing any readers or other writers from
- * grabbing the rwlock.
+ * The spinlock itself is contained in @counter and access to it is
+ * serialized with @lock_mutex.
  */
 
-/* Note that we have to ensure interrupts are disabled in case we're
- * interrupted by some other code that wants to grab the same read lock */
-static  __inline__ void arch_read_lock(arch_rwlock_t *rw)
+/* 1 - lock taken successfully */
+static inline int arch_read_trylock(arch_rwlock_t *rw)
 {
+	int ret = 0;
 	unsigned long flags;
-	local_irq_save(flags);
-	arch_spin_lock_flags(&rw->lock, flags);
-	rw->counter++;
-	arch_spin_unlock(&rw->lock);
-	local_irq_restore(flags);
-}
 
-/* Note that we have to ensure interrupts are disabled in case we're
- * interrupted by some other code that wants to grab the same read lock */
-static  __inline__ void arch_read_unlock(arch_rwlock_t *rw)
-{
-	unsigned long flags;
 	local_irq_save(flags);
-	arch_spin_lock_flags(&rw->lock, flags);
-	rw->counter--;
-	arch_spin_unlock(&rw->lock);
-	local_irq_restore(flags);
-}
+	arch_spin_lock(&(rw->lock_mutex));
 
-/* Note that we have to ensure interrupts are disabled in case we're
- * interrupted by some other code that wants to grab the same read lock */
-static __inline__ int arch_read_trylock(arch_rwlock_t *rw)
-{
-	unsigned long flags;
- retry:
-	local_irq_save(flags);
-	if (arch_spin_trylock(&rw->lock)) {
-		rw->counter++;
-		arch_spin_unlock(&rw->lock);
-		local_irq_restore(flags);
-		return 1;
+	/*
+	 * zero means writer holds the lock exclusively, deny Reader.
+	 * Otherwise grant lock to first/subseq reader
+	 */
+	if (rw->counter > 0) {
+		rw->counter--;
+		ret = 1;
 	}
 
+	arch_spin_unlock(&(rw->lock_mutex));
 	local_irq_restore(flags);
-	/* If write-locked, we fail to acquire the lock */
-	if (rw->counter < 0)
-		return 0;
 
-	/* Wait until we have a realistic chance at the lock */
-	while (arch_spin_is_locked(&rw->lock) && rw->counter >= 0)
+	return ret;
+}
+
+/* 1 - lock taken successfully */
+static inline int arch_write_trylock(arch_rwlock_t *rw)
+{
+	int ret = 0;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	arch_spin_lock(&(rw->lock_mutex));
+
+	/*
+	 * If reader(s) hold lock (lock < __ARCH_RW_LOCK_UNLOCKED__),
+	 * deny writer. Otherwise if unlocked grant to writer
+	 * Hence the claim that Linux rwlocks are unfair to writers.
+	 * (can be starved for an indefinite time by readers).
+	 */
+	if (rw->counter == __ARCH_RW_LOCK_UNLOCKED__) {
+		rw->counter = 0;
+		ret = 1;
+	}
+	arch_spin_unlock(&(rw->lock_mutex));
+	local_irq_restore(flags);
+
+	return ret;
+}
+
+static inline void arch_read_lock(arch_rwlock_t *rw)
+{
+	while (!arch_read_trylock(rw))
 		cpu_relax();
-
-	goto retry;
 }
 
-/* Note that we have to ensure interrupts are disabled in case we're
- * interrupted by some other code that wants to read_trylock() this lock */
-static __inline__ void arch_write_lock(arch_rwlock_t *rw)
+static inline void arch_write_lock(arch_rwlock_t *rw)
+{
+	while (!arch_write_trylock(rw))
+		cpu_relax();
+}
+
+static inline void arch_read_unlock(arch_rwlock_t *rw)
 {
 	unsigned long flags;
-retry:
+
 	local_irq_save(flags);
-	arch_spin_lock_flags(&rw->lock, flags);
-
-	if (rw->counter != 0) {
-		arch_spin_unlock(&rw->lock);
-		local_irq_restore(flags);
-
-		while (rw->counter != 0)
-			cpu_relax();
-
-		goto retry;
-	}
-
-	rw->counter = -1; /* mark as write-locked */
-	mb();
+	arch_spin_lock(&(rw->lock_mutex));
+	rw->counter++;
+	arch_spin_unlock(&(rw->lock_mutex));
 	local_irq_restore(flags);
 }
 
-static __inline__ void arch_write_unlock(arch_rwlock_t *rw)
-{
-	rw->counter = 0;
-	arch_spin_unlock(&rw->lock);
-}
-
-/* Note that we have to ensure interrupts are disabled in case we're
- * interrupted by some other code that wants to read_trylock() this lock */
-static __inline__ int arch_write_trylock(arch_rwlock_t *rw)
+static inline void arch_write_unlock(arch_rwlock_t *rw)
 {
 	unsigned long flags;
-	int result = 0;
 
 	local_irq_save(flags);
-	if (arch_spin_trylock(&rw->lock)) {
-		if (rw->counter == 0) {
-			rw->counter = -1;
-			result = 1;
-		} else {
-			/* Read-locked.  Oh well. */
-			arch_spin_unlock(&rw->lock);
-		}
-	}
+	arch_spin_lock(&(rw->lock_mutex));
+	rw->counter = __ARCH_RW_LOCK_UNLOCKED__;
+	arch_spin_unlock(&(rw->lock_mutex));
 	local_irq_restore(flags);
-
-	return result;
 }
 
 #endif /* __ASM_SPINLOCK_H */
diff --git a/arch/parisc/include/asm/spinlock_types.h b/arch/parisc/include/asm/spinlock_types.h
index 42979c5..ca39ee3 100644
--- a/arch/parisc/include/asm/spinlock_types.h
+++ b/arch/parisc/include/asm/spinlock_types.h
@@ -12,11 +12,19 @@ typedef struct {
 #endif
 } arch_spinlock_t;
 
+
+/* counter:
+ * Unlocked     : 0x0100_0000
+ * Read lock(s) : 0x00FF_FFFF to 0x01  (Multiple Readers decrement it)
+ * Write lock   : 0x0, but only if prior value is "unlocked" 0x0100_0000
+ */
 typedef struct {
-	arch_spinlock_t lock;
-	volatile int counter;
+	arch_spinlock_t		lock_mutex;
+	volatile unsigned int	counter;
 } arch_rwlock_t;
 
-#define __ARCH_RW_LOCK_UNLOCKED		{ __ARCH_SPIN_LOCK_UNLOCKED, 0 }
+#define __ARCH_RW_LOCK_UNLOCKED__       0x01000000
+#define __ARCH_RW_LOCK_UNLOCKED         { .lock_mutex = __ARCH_SPIN_LOCK_UNLOCKED, \
+					.counter = __ARCH_RW_LOCK_UNLOCKED__ }
 
 #endif
diff --git a/arch/parisc/kernel/.gitignore b/arch/parisc/kernel/.gitignore
index c5f676c..bbb90f9 100644
--- a/arch/parisc/kernel/.gitignore
+++ b/arch/parisc/kernel/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 vmlinux.lds
diff --git a/arch/parisc/kernel/alternative.c b/arch/parisc/kernel/alternative.c
index 3c66d5c..fa28c4c 100644
--- a/arch/parisc/kernel/alternative.c
+++ b/arch/parisc/kernel/alternative.c
@@ -25,6 +25,22 @@ void __init_or_module apply_alternatives(struct alt_instr *start,
 	struct alt_instr *entry;
 	int index = 0, applied = 0;
 	int num_cpus = num_online_cpus();
+	u32 cond_check;
+
+	cond_check = ALT_COND_ALWAYS |
+		((num_cpus == 1) ? ALT_COND_NO_SMP : 0) |
+		((cache_info.dc_size == 0) ? ALT_COND_NO_DCACHE : 0) |
+		((cache_info.ic_size == 0) ? ALT_COND_NO_ICACHE : 0) |
+		(running_on_qemu ? ALT_COND_RUN_ON_QEMU : 0) |
+		((split_tlb == 0) ? ALT_COND_NO_SPLIT_TLB : 0) |
+		/*
+		 * If the PDC_MODEL capabilities has Non-coherent IO-PDIR bit
+		 * set (bit #61, big endian), we have to flush and sync every
+		 * time IO-PDIR is changed in Ike/Astro.
+		 */
+		(((boot_cpu_data.cpu_type > pcxw_) &&
+		  ((boot_cpu_data.pdc.capabilities & PDC_MODEL_IOPDIR_FDC) == 0))
+			? ALT_COND_NO_IOC_FDC : 0);
 
 	for (entry = start; entry < end; entry++, index++) {
 
@@ -38,29 +54,14 @@ void __init_or_module apply_alternatives(struct alt_instr *start,
 
 		WARN_ON(!cond);
 
-		if (cond != ALT_COND_ALWAYS && no_alternatives)
+		if ((cond & ALT_COND_ALWAYS) == 0 && no_alternatives)
 			continue;
 
 		pr_debug("Check %d: Cond 0x%x, Replace %02d instructions @ 0x%px with 0x%08x\n",
 			index, cond, len, from, replacement);
 
-		if ((cond & ALT_COND_NO_SMP) && (num_cpus != 1))
-			continue;
-		if ((cond & ALT_COND_NO_DCACHE) && (cache_info.dc_size != 0))
-			continue;
-		if ((cond & ALT_COND_NO_ICACHE) && (cache_info.ic_size != 0))
-			continue;
-		if ((cond & ALT_COND_RUN_ON_QEMU) && !running_on_qemu)
-			continue;
-
-		/*
-		 * If the PDC_MODEL capabilities has Non-coherent IO-PDIR bit
-		 * set (bit #61, big endian), we have to flush and sync every
-		 * time IO-PDIR is changed in Ike/Astro.
-		 */
-		if ((cond & ALT_COND_NO_IOC_FDC) &&
-			((boot_cpu_data.cpu_type <= pcxw_) ||
-			 (boot_cpu_data.pdc.capabilities & PDC_MODEL_IOPDIR_FDC)))
+		/* Bounce out if none of the conditions are true. */
+		if ((cond & cond_check) == 0)
 			continue;
 
 		/* Want to replace pdtlb by a pdtlb,l instruction? */
diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c
index e5fcfb7..e76c866 100644
--- a/arch/parisc/kernel/irq.c
+++ b/arch/parisc/kernel/irq.c
@@ -560,33 +560,23 @@ void do_cpu_irq_mask(struct pt_regs *regs)
 	goto out;
 }
 
-static struct irqaction timer_action = {
-	.handler = timer_interrupt,
-	.name = "timer",
-	.flags = IRQF_TIMER | IRQF_PERCPU | IRQF_IRQPOLL,
-};
-
-#ifdef CONFIG_SMP
-static struct irqaction ipi_action = {
-	.handler = ipi_interrupt,
-	.name = "IPI",
-	.flags = IRQF_PERCPU,
-};
-#endif
-
 static void claim_cpu_irqs(void)
 {
+	unsigned long flags = IRQF_TIMER | IRQF_PERCPU | IRQF_IRQPOLL;
 	int i;
+
 	for (i = CPU_IRQ_BASE; i <= CPU_IRQ_MAX; i++) {
 		irq_set_chip_and_handler(i, &cpu_interrupt_type,
 					 handle_percpu_irq);
 	}
 
 	irq_set_handler(TIMER_IRQ, handle_percpu_irq);
-	setup_irq(TIMER_IRQ, &timer_action);
+	if (request_irq(TIMER_IRQ, timer_interrupt, flags, "timer", NULL))
+		pr_err("Failed to register timer interrupt\n");
 #ifdef CONFIG_SMP
 	irq_set_handler(IPI_IRQ, handle_percpu_irq);
-	setup_irq(IPI_IRQ, &ipi_action);
+	if (request_irq(IPI_IRQ, ipi_interrupt, IRQF_PERCPU, "IPI", NULL))
+		pr_err("Failed to register IPI interrupt\n");
 #endif
 }
 
diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S
index 97ac707..f05c9d5 100644
--- a/arch/parisc/kernel/syscall.S
+++ b/arch/parisc/kernel/syscall.S
@@ -935,7 +935,7 @@
 END(lws_table)
 	/* End of lws table */
 
-#define __SYSCALL(nr, entry, nargs) ASM_ULONG_INSN entry
+#define __SYSCALL(nr, entry)	ASM_ULONG_INSN entry
 	.align 8
 ENTRY(sys_call_table)
 	.export sys_call_table,data
diff --git a/arch/parisc/kernel/syscalls/syscallhdr.sh b/arch/parisc/kernel/syscalls/syscallhdr.sh
index 50242b7..730db28 100644
--- a/arch/parisc/kernel/syscalls/syscallhdr.sh
+++ b/arch/parisc/kernel/syscalls/syscallhdr.sh
@@ -32,5 +32,5 @@
 	printf "#define __NR_syscalls\t%s\n" "${nxt}"
 	printf "#endif\n"
 	printf "\n"
-	printf "#endif /* %s */" "${fileguard}"
+	printf "#endif /* %s */\n" "${fileguard}"
 ) > "$out"
diff --git a/arch/parisc/kernel/syscalls/syscalltbl.sh b/arch/parisc/kernel/syscalls/syscalltbl.sh
index 45b5bae..f7393a7 100644
--- a/arch/parisc/kernel/syscalls/syscalltbl.sh
+++ b/arch/parisc/kernel/syscalls/syscalltbl.sh
@@ -13,10 +13,10 @@
 	t_entry="$3"
 
 	while [ $t_nxt -lt $t_nr ]; do
-		printf "__SYSCALL(%s, sys_ni_syscall, )\n" "${t_nxt}"
+		printf "__SYSCALL(%s,sys_ni_syscall)\n" "${t_nxt}"
 		t_nxt=$((t_nxt+1))
 	done
-	printf "__SYSCALL(%s, %s, )\n" "${t_nxt}" "${t_entry}"
+	printf "__SYSCALL(%s,%s)\n" "${t_nxt}" "${t_entry}"
 }
 
 grep -E "^[0-9A-Fa-fXx]+[[:space:]]+${my_abis}" "$in" | sort -n | (
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 5fc4536..924c541 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -122,6 +122,7 @@
 	select ARCH_HAS_GCOV_PROFILE_ALL
 	select ARCH_HAS_KCOV
 	select ARCH_HAS_HUGEPD			if HUGETLB_PAGE
+	select ARCH_HAS_MEMREMAP_COMPAT_ALIGN
 	select ARCH_HAS_MMIOWB			if PPC64
 	select ARCH_HAS_PHYS_TO_DMA
 	select ARCH_HAS_PMEM_API
@@ -265,8 +266,9 @@
 	default 180
 
 config COMPAT
-	bool
-	default y if PPC64
+	bool "Enable support for 32bit binaries"
+	depends on PPC64
+	default y if !CPU_LITTLE_ENDIAN
 	select COMPAT_BINFMT_ELF
 	select ARCH_WANT_OLD_COMPAT_IPC
 	select COMPAT_OLD_SIGACTION
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index f357305..f310c32 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -239,10 +239,8 @@
 KBUILD_CFLAGS += $(call cc-option,-mno-spe)
 KBUILD_CFLAGS += $(call cc-option,-mspe=no)
 
-# FIXME: the module load should be taught about the additional relocs
-# generated by this.
-# revert to pre-gcc-4.4 behaviour of .eh_frame
-KBUILD_CFLAGS	+= $(call cc-option,-fno-dwarf2-cfi-asm)
+# Don't emit .eh_frame since we have no use for it
+KBUILD_CFLAGS += -fno-asynchronous-unwind-tables
 
 # Never use string load/store instructions as they are
 # often slow when they are implemented at all
@@ -298,6 +296,7 @@
 	$(Q)$(MAKE) $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
 
 
+PHONY += bootwrapper_install
 bootwrapper_install:
 	$(Q)$(MAKE) $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
 
@@ -403,9 +402,11 @@
   @echo '  (minus the .dts extension).'
 endef
 
+PHONY += install
 install:
 	$(Q)$(MAKE) $(build)=$(boot) install
 
+PHONY += vdso_install
 vdso_install:
 ifdef CONFIG_PPC64
 	$(Q)$(MAKE) $(build)=arch/$(ARCH)/kernel/vdso64 $@
@@ -425,6 +426,7 @@
 ifdef CONFIG_STACKPROTECTOR
 prepare: stack_protector_prepare
 
+PHONY += stack_protector_prepare
 stack_protector_prepare: prepare0
 ifdef CONFIG_PPC64
 	$(eval KBUILD_CFLAGS += -mstack-protector-guard-offset=$(shell awk '{if ($$2 == "PACA_CANARY") print $$3;}' include/generated/asm-offsets.h))
@@ -436,10 +438,12 @@
 ifdef CONFIG_SMP
 prepare: task_cpu_prepare
 
+PHONY += task_cpu_prepare
 task_cpu_prepare: prepare0
 	$(eval KBUILD_CFLAGS += -D_TASK_CPU=$(shell awk '{if ($$2 == "TASK_CPU") print $$3;}' include/generated/asm-offsets.h))
 endif
 
+PHONY += checkbin
 # Check toolchain versions:
 # - gcc-4.6 is the minimum kernel-wide version so nothing required.
 checkbin:
diff --git a/arch/powerpc/boot/.gitignore b/arch/powerpc/boot/.gitignore
index 6610665..1eee61b 100644
--- a/arch/powerpc/boot/.gitignore
+++ b/arch/powerpc/boot/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 addnote
 decompress_inflate.c
 empty.c
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 0556bf4..c53a1b8 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -445,6 +445,8 @@
 zInstall: $(CONFIGURE) $(addprefix $(obj)/, $(image-y))
 	sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" $^
 
+PHONY += install zInstall
+
 # anything not in $(targets)
 clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \
 	zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \
diff --git a/arch/powerpc/boot/crt0.S b/arch/powerpc/boot/crt0.S
index 92608f3..1d83966 100644
--- a/arch/powerpc/boot/crt0.S
+++ b/arch/powerpc/boot/crt0.S
@@ -44,9 +44,6 @@
 p_pstack:	.long	_platform_stack_top
 #endif
 
-	.globl	_zimage_start
-	/* Clang appears to require the .weak directive to be after the symbol
-	 * is defined. See https://bugs.llvm.org/show_bug.cgi?id=38921  */
 	.weak	_zimage_start
 _zimage_start:
 	.globl	_zimage_start_lib
diff --git a/arch/powerpc/configs/85xx-hw.config b/arch/powerpc/configs/85xx-hw.config
index 9575a38..b507df6 100644
--- a/arch/powerpc/configs/85xx-hw.config
+++ b/arch/powerpc/configs/85xx-hw.config
@@ -2,7 +2,6 @@
 CONFIG_AT803X_PHY=y
 CONFIG_ATA=y
 CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_BLK_DEV_SR=y
 CONFIG_BROADCOM_PHY=y
 CONFIG_C293_PCIE=y
diff --git a/arch/powerpc/configs/amigaone_defconfig b/arch/powerpc/configs/amigaone_defconfig
index f6d140f..200bb1e 100644
--- a/arch/powerpc/configs/amigaone_defconfig
+++ b/arch/powerpc/configs/amigaone_defconfig
@@ -44,7 +44,6 @@
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
 CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SYM53C8XX_2=y
diff --git a/arch/powerpc/configs/chrp32_defconfig b/arch/powerpc/configs/chrp32_defconfig
index 502a75d4..a4a805b 100644
--- a/arch/powerpc/configs/chrp32_defconfig
+++ b/arch/powerpc/configs/chrp32_defconfig
@@ -42,7 +42,6 @@
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
 CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SYM53C8XX_2=y
diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig
index fbfcc85..a68c7f3 100644
--- a/arch/powerpc/configs/g5_defconfig
+++ b/arch/powerpc/configs/g5_defconfig
@@ -62,7 +62,6 @@
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
 CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SPI_ATTRS=y
diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig
index 2975e64..161351a 100644
--- a/arch/powerpc/configs/maple_defconfig
+++ b/arch/powerpc/configs/maple_defconfig
@@ -41,7 +41,6 @@
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_SCSI_IPR=y
 CONFIG_ATA=y
diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig
index 4b6d31d..08b7f4c 100644
--- a/arch/powerpc/configs/pasemi_defconfig
+++ b/arch/powerpc/configs/pasemi_defconfig
@@ -60,7 +60,6 @@
 CONFIG_CHR_DEV_ST=y
 CONFIG_CHR_DEV_OSST=y
 CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_CHR_DEV_SCH=y
 CONFIG_SCSI_CONSTANTS=y
diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig
index f492e7d..05e325c 100644
--- a/arch/powerpc/configs/pmac32_defconfig
+++ b/arch/powerpc/configs/pmac32_defconfig
@@ -117,7 +117,6 @@
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
 CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_FC_ATTRS=y
diff --git a/arch/powerpc/configs/powernv_defconfig b/arch/powerpc/configs/powernv_defconfig
index 7174937..df8bdba 100644
--- a/arch/powerpc/configs/powernv_defconfig
+++ b/arch/powerpc/configs/powernv_defconfig
@@ -108,7 +108,6 @@
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
 CONFIG_BLK_DEV_SR=m
-CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SCAN_ASYNC=y
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index 7e68cb2..bae8170 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -110,7 +110,6 @@
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
 CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_FC_ATTRS=y
diff --git a/arch/powerpc/configs/ppc64e_defconfig b/arch/powerpc/configs/ppc64e_defconfig
index 0d74677..33a01a9 100644
--- a/arch/powerpc/configs/ppc64e_defconfig
+++ b/arch/powerpc/configs/ppc64e_defconfig
@@ -60,7 +60,6 @@
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
 CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_FC_ATTRS=y
diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig
index 3e2f44f..feb5d47 100644
--- a/arch/powerpc/configs/ppc6xx_defconfig
+++ b/arch/powerpc/configs/ppc6xx_defconfig
@@ -368,7 +368,6 @@
 CONFIG_CHR_DEV_ST=m
 CONFIG_CHR_DEV_OSST=m
 CONFIG_BLK_DEV_SR=m
-CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_CHR_DEV_SCH=m
 CONFIG_SCSI_ENCLOSURE=m
diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig
index 4db5171..81b55c8 100644
--- a/arch/powerpc/configs/ps3_defconfig
+++ b/arch/powerpc/configs/ps3_defconfig
@@ -60,6 +60,8 @@
 CONFIG_CFG80211_WEXT=y
 CONFIG_MAC80211=m
 # CONFIG_MAC80211_RC_MINSTREL is not set
+CONFIG_UEVENT_HELPER=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=65535
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index 6b68109..0bea4d3 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -97,7 +97,6 @@
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
 CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_FC_ATTRS=y
diff --git a/arch/powerpc/configs/skiroot_defconfig b/arch/powerpc/configs/skiroot_defconfig
index 1b6bdad..ad6739a 100644
--- a/arch/powerpc/configs/skiroot_defconfig
+++ b/arch/powerpc/configs/skiroot_defconfig
@@ -84,7 +84,6 @@
 # CONFIG_OCXL is not set
 CONFIG_BLK_DEV_SD=m
 CONFIG_BLK_DEV_SR=m
-CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SCAN_ASYNC=y
diff --git a/arch/powerpc/include/asm/asm-prototypes.h b/arch/powerpc/include/asm/asm-prototypes.h
index 983c008..7d81e86 100644
--- a/arch/powerpc/include/asm/asm-prototypes.h
+++ b/arch/powerpc/include/asm/asm-prototypes.h
@@ -97,6 +97,10 @@ ppc_select(int n, fd_set __user *inp, fd_set __user *outp, fd_set __user *exp,
 unsigned long __init early_init(unsigned long dt_ptr);
 void __init machine_init(u64 dt_ptr);
 #endif
+long system_call_exception(long r3, long r4, long r5, long r6, long r7, long r8, unsigned long r0, struct pt_regs *regs);
+notrace unsigned long syscall_exit_prepare(unsigned long r3, struct pt_regs *regs);
+notrace unsigned long interrupt_exit_user_prepare(struct pt_regs *regs, unsigned long msr);
+notrace unsigned long interrupt_exit_kernel_prepare(struct pt_regs *regs, unsigned long msr);
 
 long ppc_fadvise64_64(int fd, int advice, u32 offset_high, u32 offset_low,
 		      u32 len_high, u32 len_low);
@@ -104,14 +108,6 @@ long sys_switch_endian(void);
 notrace unsigned int __check_irq_replay(void);
 void notrace restore_interrupts(void);
 
-/* ptrace */
-long do_syscall_trace_enter(struct pt_regs *regs);
-void do_syscall_trace_leave(struct pt_regs *regs);
-
-/* process */
-void restore_math(struct pt_regs *regs);
-void restore_tm_state(struct pt_regs *regs);
-
 /* prom_init (OpenFirmware) */
 unsigned long __init prom_init(unsigned long r3, unsigned long r4,
 			       unsigned long pp,
@@ -122,9 +118,6 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
 void __init early_setup(unsigned long dt_ptr);
 void early_setup_secondary(void);
 
-/* time */
-void accumulate_stolen_time(void);
-
 /* misc runtime */
 extern u64 __bswapdi2(u64);
 extern s64 __lshrdi3(s64, int);
diff --git a/arch/powerpc/include/asm/book3s/32/hash.h b/arch/powerpc/include/asm/book3s/32/hash.h
index 2a0a467..34a7215 100644
--- a/arch/powerpc/include/asm/book3s/32/hash.h
+++ b/arch/powerpc/include/asm/book3s/32/hash.h
@@ -17,9 +17,9 @@
  * updating the accessed and modified bits in the page table tree.
  */
 
-#define _PAGE_PRESENT	0x001	/* software: pte contains a translation */
-#define _PAGE_HASHPTE	0x002	/* hash_page has made an HPTE for this pte */
-#define _PAGE_USER	0x004	/* usermode access allowed */
+#define _PAGE_USER	0x001	/* usermode access allowed */
+#define _PAGE_RW	0x002	/* software: user write access allowed */
+#define _PAGE_PRESENT	0x004	/* software: pte contains a translation */
 #define _PAGE_GUARDED	0x008	/* G: prohibit speculative access */
 #define _PAGE_COHERENT	0x010	/* M: enforce memory coherence (SMP systems) */
 #define _PAGE_NO_CACHE	0x020	/* I: cache inhibit */
@@ -27,7 +27,7 @@
 #define _PAGE_DIRTY	0x080	/* C: page changed */
 #define _PAGE_ACCESSED	0x100	/* R: page referenced */
 #define _PAGE_EXEC	0x200	/* software: exec allowed */
-#define _PAGE_RW	0x400	/* software: user write access allowed */
+#define _PAGE_HASHPTE	0x400	/* hash_page has made an HPTE for this pte */
 #define _PAGE_SPECIAL	0x800	/* software: Special page */
 
 #ifdef CONFIG_PTE_64BIT
diff --git a/arch/powerpc/include/asm/book3s/32/pgtable.h b/arch/powerpc/include/asm/book3s/32/pgtable.h
index 5b39c11..7549393 100644
--- a/arch/powerpc/include/asm/book3s/32/pgtable.h
+++ b/arch/powerpc/include/asm/book3s/32/pgtable.h
@@ -366,10 +366,8 @@ static inline void __ptep_set_access_flags(struct vm_area_struct *vma,
 	(((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
 #define pte_offset_kernel(dir, addr)	\
 	((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(addr))
-#define pte_offset_map(dir, addr)		\
-	((pte_t *)(kmap_atomic(pmd_page(*(dir))) + \
-		   (pmd_page_vaddr(*(dir)) & ~PAGE_MASK)) + pte_index(addr))
-#define pte_unmap(pte)		kunmap_atomic(pte)
+#define pte_offset_map(dir, addr)	pte_offset_kernel((dir), (addr))
+static inline void pte_unmap(pte_t *pte) { }
 
 /*
  * Encode and decode a swap entry.
diff --git a/arch/powerpc/include/asm/book3s/64/hash-4k.h b/arch/powerpc/include/asm/book3s/64/hash-4k.h
index 8fd8599..3f9ae35 100644
--- a/arch/powerpc/include/asm/book3s/64/hash-4k.h
+++ b/arch/powerpc/include/asm/book3s/64/hash-4k.h
@@ -156,6 +156,12 @@ extern pmd_t hash__pmdp_huge_get_and_clear(struct mm_struct *mm,
 extern int hash__has_transparent_hugepage(void);
 #endif
 
+static inline pmd_t hash__pmd_mkdevmap(pmd_t pmd)
+{
+	BUG();
+	return pmd;
+}
+
 #endif /* !__ASSEMBLY__ */
 
 #endif /* _ASM_POWERPC_BOOK3S_64_HASH_4K_H */
diff --git a/arch/powerpc/include/asm/book3s/64/hash-64k.h b/arch/powerpc/include/asm/book3s/64/hash-64k.h
index d1d9177..0729c03 100644
--- a/arch/powerpc/include/asm/book3s/64/hash-64k.h
+++ b/arch/powerpc/include/asm/book3s/64/hash-64k.h
@@ -246,7 +246,7 @@ static inline void mark_hpte_slot_valid(unsigned char *hpte_slot_array,
  */
 static inline int hash__pmd_trans_huge(pmd_t pmd)
 {
-	return !!((pmd_val(pmd) & (_PAGE_PTE | H_PAGE_THP_HUGE)) ==
+	return !!((pmd_val(pmd) & (_PAGE_PTE | H_PAGE_THP_HUGE | _PAGE_DEVMAP)) ==
 		  (_PAGE_PTE | H_PAGE_THP_HUGE));
 }
 
@@ -272,6 +272,12 @@ extern pmd_t hash__pmdp_huge_get_and_clear(struct mm_struct *mm,
 				       unsigned long addr, pmd_t *pmdp);
 extern int hash__has_transparent_hugepage(void);
 #endif /*  CONFIG_TRANSPARENT_HUGEPAGE */
+
+static inline pmd_t hash__pmd_mkdevmap(pmd_t pmd)
+{
+	return __pmd(pmd_val(pmd) | (_PAGE_PTE | H_PAGE_THP_HUGE | _PAGE_DEVMAP));
+}
+
 #endif	/* __ASSEMBLY__ */
 
 #endif /* _ASM_POWERPC_BOOK3S_64_HASH_64K_H */
diff --git a/arch/powerpc/include/asm/book3s/64/hash.h b/arch/powerpc/include/asm/book3s/64/hash.h
index 2781ebf..6fc4520 100644
--- a/arch/powerpc/include/asm/book3s/64/hash.h
+++ b/arch/powerpc/include/asm/book3s/64/hash.h
@@ -251,7 +251,8 @@ extern int __meminit hash__vmemmap_create_mapping(unsigned long start,
 extern void hash__vmemmap_remove_mapping(unsigned long start,
 				     unsigned long page_size);
 
-int hash__create_section_mapping(unsigned long start, unsigned long end, int nid);
+int hash__create_section_mapping(unsigned long start, unsigned long end,
+				 int nid, pgprot_t prot);
 int hash__remove_section_mapping(unsigned long start, unsigned long end);
 
 #endif /* !__ASSEMBLY__ */
diff --git a/arch/powerpc/include/asm/book3s/64/kup-radix.h b/arch/powerpc/include/asm/book3s/64/kup-radix.h
index 90dd3a3..3bcef98 100644
--- a/arch/powerpc/include/asm/book3s/64/kup-radix.h
+++ b/arch/powerpc/include/asm/book3s/64/kup-radix.h
@@ -3,6 +3,7 @@
 #define _ASM_POWERPC_BOOK3S_64_KUP_RADIX_H
 
 #include <linux/const.h>
+#include <asm/reg.h>
 
 #define AMR_KUAP_BLOCK_READ	UL(0x4000000000000000)
 #define AMR_KUAP_BLOCK_WRITE	UL(0x8000000000000000)
@@ -56,7 +57,20 @@
 
 #ifdef CONFIG_PPC_KUAP
 
-#include <asm/reg.h>
+#include <asm/mmu.h>
+#include <asm/ptrace.h>
+
+static inline void kuap_restore_amr(struct pt_regs *regs)
+{
+	if (mmu_has_feature(MMU_FTR_RADIX_KUAP))
+		mtspr(SPRN_AMR, regs->kuap);
+}
+
+static inline void kuap_check_amr(void)
+{
+	if (IS_ENABLED(CONFIG_PPC_KUAP_DEBUG) && mmu_has_feature(MMU_FTR_RADIX_KUAP))
+		WARN_ON_ONCE(mfspr(SPRN_AMR) != AMR_KUAP_BLOCKED);
+}
 
 /*
  * We support individually allowing read or write, but we don't support nesting
@@ -127,6 +141,14 @@ bad_kuap_fault(struct pt_regs *regs, unsigned long address, bool is_write)
 		    (regs->kuap & (is_write ? AMR_KUAP_BLOCK_WRITE : AMR_KUAP_BLOCK_READ)),
 		    "Bug: %s fault blocked by AMR!", is_write ? "Write" : "Read");
 }
+#else /* CONFIG_PPC_KUAP */
+static inline void kuap_restore_amr(struct pt_regs *regs)
+{
+}
+
+static inline void kuap_check_amr(void)
+{
+}
 #endif /* CONFIG_PPC_KUAP */
 
 #endif /* __ASSEMBLY__ */
diff --git a/arch/powerpc/include/asm/book3s/64/pgtable.h b/arch/powerpc/include/asm/book3s/64/pgtable.h
index 201a69e..368b136 100644
--- a/arch/powerpc/include/asm/book3s/64/pgtable.h
+++ b/arch/powerpc/include/asm/book3s/64/pgtable.h
@@ -1303,7 +1303,9 @@ extern void serialize_against_pte_lookup(struct mm_struct *mm);
 
 static inline pmd_t pmd_mkdevmap(pmd_t pmd)
 {
-	return __pmd(pmd_val(pmd) | (_PAGE_PTE | _PAGE_DEVMAP));
+	if (radix_enabled())
+		return radix__pmd_mkdevmap(pmd);
+	return hash__pmd_mkdevmap(pmd);
 }
 
 static inline int pmd_devmap(pmd_t pmd)
diff --git a/arch/powerpc/include/asm/book3s/64/radix.h b/arch/powerpc/include/asm/book3s/64/radix.h
index d97db3a..08c222d 100644
--- a/arch/powerpc/include/asm/book3s/64/radix.h
+++ b/arch/powerpc/include/asm/book3s/64/radix.h
@@ -263,6 +263,11 @@ static inline int radix__has_transparent_hugepage(void)
 }
 #endif
 
+static inline pmd_t radix__pmd_mkdevmap(pmd_t pmd)
+{
+	return __pmd(pmd_val(pmd) | (_PAGE_PTE | _PAGE_DEVMAP));
+}
+
 extern int __meminit radix__vmemmap_create_mapping(unsigned long start,
 					     unsigned long page_size,
 					     unsigned long phys);
@@ -289,7 +294,8 @@ static inline unsigned long radix__get_tree_size(void)
 }
 
 #ifdef CONFIG_MEMORY_HOTPLUG
-int radix__create_section_mapping(unsigned long start, unsigned long end, int nid);
+int radix__create_section_mapping(unsigned long start, unsigned long end,
+				  int nid, pgprot_t prot);
 int radix__remove_section_mapping(unsigned long start, unsigned long end);
 #endif /* CONFIG_MEMORY_HOTPLUG */
 #endif /* __ASSEMBLY__ */
diff --git a/arch/powerpc/include/asm/cache.h b/arch/powerpc/include/asm/cache.h
index 72b8101..609cab1 100644
--- a/arch/powerpc/include/asm/cache.h
+++ b/arch/powerpc/include/asm/cache.h
@@ -97,7 +97,7 @@ static inline u32 l1_icache_bytes(void)
 
 #endif
 
-#define __read_mostly __attribute__((__section__(".data..read_mostly")))
+#define __read_mostly __section(.data..read_mostly)
 
 #ifdef CONFIG_PPC_BOOK3S_32
 extern long _get_L2CR(void);
diff --git a/arch/powerpc/include/asm/cacheflush.h b/arch/powerpc/include/asm/cacheflush.h
index 4a1c9f0..e92191b 100644
--- a/arch/powerpc/include/asm/cacheflush.h
+++ b/arch/powerpc/include/asm/cacheflush.h
@@ -65,17 +65,13 @@ static inline void flush_dcache_range(unsigned long start, unsigned long stop)
 	unsigned long size = stop - (unsigned long)addr + (bytes - 1);
 	unsigned long i;
 
-	if (IS_ENABLED(CONFIG_PPC64)) {
+	if (IS_ENABLED(CONFIG_PPC64))
 		mb();	/* sync */
-		isync();
-	}
 
 	for (i = 0; i < size >> shift; i++, addr += bytes)
 		dcbf(addr);
 	mb();	/* sync */
 
-	if (IS_ENABLED(CONFIG_PPC64))
-		isync();
 }
 
 /*
diff --git a/arch/powerpc/include/asm/cputime.h b/arch/powerpc/include/asm/cputime.h
index 2431b4a..0fccd5e 100644
--- a/arch/powerpc/include/asm/cputime.h
+++ b/arch/powerpc/include/asm/cputime.h
@@ -43,9 +43,12 @@ static inline unsigned long cputime_to_usecs(const cputime_t ct)
  */
 #ifdef CONFIG_PPC64
 #define get_accounting(tsk)	(&get_paca()->accounting)
+#define raw_get_accounting(tsk)	(&local_paca->accounting)
 static inline void arch_vtime_task_switch(struct task_struct *tsk) { }
+
 #else
 #define get_accounting(tsk)	(&task_thread_info(tsk)->accounting)
+#define raw_get_accounting(tsk)	get_accounting(tsk)
 /*
  * Called from the context switch with interrupts disabled, to charge all
  * accumulated times to the current process, and to prepare accounting on
@@ -60,6 +63,36 @@ static inline void arch_vtime_task_switch(struct task_struct *prev)
 }
 #endif
 
+/*
+ * account_cpu_user_entry/exit runs "unreconciled", so can't trace,
+ * can't use use get_paca()
+ */
+static notrace inline void account_cpu_user_entry(void)
+{
+	unsigned long tb = mftb();
+	struct cpu_accounting_data *acct = raw_get_accounting(current);
+
+	acct->utime += (tb - acct->starttime_user);
+	acct->starttime = tb;
+}
+
+static notrace inline void account_cpu_user_exit(void)
+{
+	unsigned long tb = mftb();
+	struct cpu_accounting_data *acct = raw_get_accounting(current);
+
+	acct->stime += (tb - acct->starttime);
+	acct->starttime_user = tb;
+}
+
+
 #endif /* __KERNEL__ */
+#else /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */
+static inline void account_cpu_user_entry(void)
+{
+}
+static inline void account_cpu_user_exit(void)
+{
+}
 #endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */
 #endif /* __POWERPC_CPUTIME_H */
diff --git a/arch/powerpc/include/asm/dma.h b/arch/powerpc/include/asm/dma.h
index 1b4f025..6161a95 100644
--- a/arch/powerpc/include/asm/dma.h
+++ b/arch/powerpc/include/asm/dma.h
@@ -151,10 +151,9 @@
 #define DMA2_EXT_REG		0x4D6
 
 #ifndef __powerpc64__
-    /* in arch/ppc/kernel/setup.c -- Cort */
+    /* in arch/powerpc/kernel/setup_32.c -- Cort */
     extern unsigned int DMA_MODE_WRITE;
     extern unsigned int DMA_MODE_READ;
-    extern unsigned long ISA_DMA_THRESHOLD;
 #else
     #define DMA_MODE_READ	0x44	/* I/O to memory, no autoinit, increment, single mode */
     #define DMA_MODE_WRITE	0x48	/* memory to I/O, no autoinit, increment, single mode */
diff --git a/arch/powerpc/include/asm/drmem.h b/arch/powerpc/include/asm/drmem.h
index 3d76e1c..28c3d93 100644
--- a/arch/powerpc/include/asm/drmem.h
+++ b/arch/powerpc/include/asm/drmem.h
@@ -27,12 +27,12 @@ struct drmem_lmb_info {
 extern struct drmem_lmb_info *drmem_info;
 
 #define for_each_drmem_lmb_in_range(lmb, start, end)		\
-	for ((lmb) = (start); (lmb) <= (end); (lmb)++)
+	for ((lmb) = (start); (lmb) < (end); (lmb)++)
 
 #define for_each_drmem_lmb(lmb)					\
 	for_each_drmem_lmb_in_range((lmb),			\
 		&drmem_info->lmbs[0],				\
-		&drmem_info->lmbs[drmem_info->n_lmbs - 1])
+		&drmem_info->lmbs[drmem_info->n_lmbs])
 
 /*
  * The of_drconf_cell_v1 struct defines the layout of the LMB data
diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
index 6f9b2a1..964a542 100644
--- a/arch/powerpc/include/asm/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
@@ -215,7 +215,7 @@ enum {
 struct eeh_ops {
 	char *name;
 	int (*init)(void);
-	void* (*probe)(struct pci_dn *pdn, void *data);
+	struct eeh_dev *(*probe)(struct pci_dev *pdev);
 	int (*set_option)(struct eeh_pe *pe, int option);
 	int (*get_pe_addr)(struct eeh_pe *pe);
 	int (*get_state)(struct eeh_pe *pe, int *delay);
@@ -301,11 +301,7 @@ int __exit eeh_ops_unregister(const char *name);
 int eeh_check_failure(const volatile void __iomem *token);
 int eeh_dev_check_failure(struct eeh_dev *edev);
 void eeh_addr_cache_init(void);
-void eeh_add_device_early(struct pci_dn *);
-void eeh_add_device_tree_early(struct pci_dn *);
-void eeh_add_device_late(struct pci_dev *);
-void eeh_add_device_tree_late(struct pci_bus *);
-void eeh_add_sysfs_files(struct pci_bus *);
+void eeh_probe_device(struct pci_dev *pdev);
 void eeh_remove_device(struct pci_dev *);
 int eeh_unfreeze_pe(struct eeh_pe *pe);
 int eeh_pe_reset_and_recover(struct eeh_pe *pe);
@@ -360,15 +356,7 @@ static inline int eeh_check_failure(const volatile void __iomem *token)
 
 static inline void eeh_addr_cache_init(void) { }
 
-static inline void eeh_add_device_early(struct pci_dn *pdn) { }
-
-static inline void eeh_add_device_tree_early(struct pci_dn *pdn) { }
-
-static inline void eeh_add_device_late(struct pci_dev *dev) { }
-
-static inline void eeh_add_device_tree_late(struct pci_bus *bus) { }
-
-static inline void eeh_add_sysfs_files(struct pci_bus *bus) { }
+static inline void eeh_probe_device(struct pci_dev *dev) { }
 
 static inline void eeh_remove_device(struct pci_dev *dev) { }
 
@@ -376,6 +364,14 @@ static inline void eeh_remove_device(struct pci_dev *dev) { }
 #define EEH_IO_ERROR_VALUE(size) (-1UL)
 #endif /* CONFIG_EEH */
 
+#if defined(CONFIG_PPC_PSERIES) && defined(CONFIG_EEH)
+void pseries_eeh_init_edev(struct pci_dn *pdn);
+void pseries_eeh_init_edev_recursive(struct pci_dn *pdn);
+#else
+static inline void pseries_eeh_add_device_early(struct pci_dn *pdn) { }
+static inline void pseries_eeh_add_device_tree_early(struct pci_dn *pdn) { }
+#endif
+
 #ifdef CONFIG_PPC64
 /*
  * MMIO read/write operations with EEH support.
diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h
index 33f4f72..47bd4ea 100644
--- a/arch/powerpc/include/asm/exception-64s.h
+++ b/arch/powerpc/include/asm/exception-64s.h
@@ -33,11 +33,7 @@
 #include <asm/feature-fixups.h>
 
 /* PACA save area size in u64 units (exgen, exmc, etc) */
-#if defined(CONFIG_RELOCATABLE)
 #define EX_SIZE		10
-#else
-#define EX_SIZE		9
-#endif
 
 /*
  * maximum recursive depth of MCE exceptions
diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h
index e3a905e..e0e7177 100644
--- a/arch/powerpc/include/asm/hw_irq.h
+++ b/arch/powerpc/include/asm/hw_irq.h
@@ -52,7 +52,7 @@
 #ifndef __ASSEMBLY__
 
 extern void replay_system_reset(void);
-extern void __replay_interrupt(unsigned int vector);
+extern void replay_soft_interrupts(void);
 
 extern void timer_interrupt(struct pt_regs *);
 extern void timer_broadcast_interrupt(void);
@@ -228,9 +228,13 @@ static inline bool arch_irqs_disabled(void)
 #ifdef CONFIG_PPC_BOOK3E
 #define __hard_irq_enable()	wrtee(MSR_EE)
 #define __hard_irq_disable()	wrtee(0)
+#define __hard_EE_RI_disable()	wrtee(0)
+#define __hard_RI_enable()	do { } while (0)
 #else
 #define __hard_irq_enable()	__mtmsrd(MSR_EE|MSR_RI, 1)
 #define __hard_irq_disable()	__mtmsrd(MSR_RI, 1)
+#define __hard_EE_RI_disable()	__mtmsrd(0, 1)
+#define __hard_RI_enable()	__mtmsrd(MSR_RI, 1)
 #endif
 
 #define hard_irq_disable()	do {					\
diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index f99b433..1dc6310 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -309,8 +309,6 @@ struct kvm_arch {
 	pgd_t *pgtable;
 	u64 process_table;
 	struct dentry *debugfs_dir;
-	struct dentry *htab_dentry;
-	struct dentry *radix_dentry;
 	struct kvm_resize_hpt *resize_hpt; /* protected by kvm->lock */
 #endif /* CONFIG_KVM_BOOK3S_HV_POSSIBLE */
 #ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
@@ -831,7 +829,6 @@ struct kvm_vcpu_arch {
 	struct kvmhv_tb_accumulator cede_time;	/* time napping inside guest */
 
 	struct dentry *debugfs_dir;
-	struct dentry *debugfs_timings;
 #endif /* CONFIG_KVM_BOOK3S_HV_EXIT_TIMING */
 };
 
diff --git a/arch/powerpc/include/asm/mce.h b/arch/powerpc/include/asm/mce.h
index 6a6ddaa..376a395 100644
--- a/arch/powerpc/include/asm/mce.h
+++ b/arch/powerpc/include/asm/mce.h
@@ -218,6 +218,8 @@ extern void machine_check_queue_event(void);
 extern void machine_check_print_event_info(struct machine_check_event *evt,
 					   bool user_mode, bool in_guest);
 unsigned long addr_to_pfn(struct pt_regs *regs, unsigned long addr);
+extern void mce_common_process_ue(struct pt_regs *regs,
+				  struct mce_error_info *mce_err);
 #ifdef CONFIG_PPC_BOOK3S_64
 void flush_and_reload_slb(void);
 #endif /* CONFIG_PPC_BOOK3S_64 */
diff --git a/arch/powerpc/include/asm/nohash/32/pgtable.h b/arch/powerpc/include/asm/nohash/32/pgtable.h
index 60c4d82..b04ba25 100644
--- a/arch/powerpc/include/asm/nohash/32/pgtable.h
+++ b/arch/powerpc/include/asm/nohash/32/pgtable.h
@@ -372,10 +372,8 @@ static inline int pte_young(pte_t pte)
 #define pte_offset_kernel(dir, addr)	\
 	(pmd_bad(*(dir)) ? NULL : (pte_t *)pmd_page_vaddr(*(dir)) + \
 				  pte_index(addr))
-#define pte_offset_map(dir, addr)		\
-	((pte_t *)(kmap_atomic(pmd_page(*(dir))) + \
-		   (pmd_page_vaddr(*(dir)) & ~PAGE_MASK)) + pte_index(addr))
-#define pte_unmap(pte)		kunmap_atomic(pte)
+#define pte_offset_map(dir, addr)	pte_offset_kernel((dir), (addr))
+static inline void pte_unmap(pte_t *pte) { }
 
 /*
  * Encode and decode a swap entry.
diff --git a/arch/powerpc/include/asm/opal-api.h b/arch/powerpc/include/asm/opal-api.h
index c1f25a7..1dffa3c 100644
--- a/arch/powerpc/include/asm/opal-api.h
+++ b/arch/powerpc/include/asm/opal-api.h
@@ -1067,6 +1067,7 @@ enum {
 	OPAL_REBOOT_PLATFORM_ERROR	= 1,
 	OPAL_REBOOT_FULL_IPL		= 2,
 	OPAL_REBOOT_MPIPL		= 3,
+	OPAL_REBOOT_FAST		= 4,
 };
 
 /* Argument to OPAL_PCI_TCE_KILL */
diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h
index 080a0bf..3ee8df0 100644
--- a/arch/powerpc/include/asm/page.h
+++ b/arch/powerpc/include/asm/page.h
@@ -240,13 +240,8 @@ static inline bool pfn_valid(unsigned long pfn)
  * and needs to be executable.  This means the whole heap ends
  * up being executable.
  */
-#define VM_DATA_DEFAULT_FLAGS32 \
-	(((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0) | \
-				 VM_READ | VM_WRITE | \
-				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
-#define VM_DATA_DEFAULT_FLAGS64	(VM_READ | VM_WRITE | \
-				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+#define VM_DATA_DEFAULT_FLAGS32	VM_DATA_FLAGS_TSK_EXEC
+#define VM_DATA_DEFAULT_FLAGS64	VM_DATA_FLAGS_NON_EXEC
 
 #ifdef __powerpc64__
 #include <asm/page_64.h>
diff --git a/arch/powerpc/include/asm/page_64.h b/arch/powerpc/include/asm/page_64.h
index 5962797..79a9b7c 100644
--- a/arch/powerpc/include/asm/page_64.h
+++ b/arch/powerpc/include/asm/page_64.h
@@ -94,11 +94,8 @@ extern u64 ppc64_pft_size;
  * stack by default, so in the absence of a PT_GNU_STACK program header
  * we turn execute permission off.
  */
-#define VM_STACK_DEFAULT_FLAGS32	(VM_READ | VM_WRITE | VM_EXEC | \
-					 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
-#define VM_STACK_DEFAULT_FLAGS64	(VM_READ | VM_WRITE | \
-					 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+#define VM_STACK_DEFAULT_FLAGS32	VM_DATA_FLAGS_EXEC
+#define VM_STACK_DEFAULT_FLAGS64	VM_DATA_FLAGS_NON_EXEC
 
 #define VM_STACK_DEFAULT_FLAGS \
 	(is_32bit_task() ? \
diff --git a/arch/powerpc/include/asm/perf_event.h b/arch/powerpc/include/asm/perf_event.h
index 7426d7a..eed3954 100644
--- a/arch/powerpc/include/asm/perf_event.h
+++ b/arch/powerpc/include/asm/perf_event.h
@@ -32,7 +32,7 @@
 	do {							\
 		(regs)->result = 0;				\
 		(regs)->nip = __ip;				\
-		(regs)->gpr[1] = current_stack_pointer();	\
+		(regs)->gpr[1] = current_stack_frame();		\
 		asm volatile("mfmsr %0" : "=r" ((regs)->msr));	\
 	} while (0)
 
diff --git a/arch/powerpc/include/asm/pgtable.h b/arch/powerpc/include/asm/pgtable.h
index 8cc543e..b1f1d53 100644
--- a/arch/powerpc/include/asm/pgtable.h
+++ b/arch/powerpc/include/asm/pgtable.h
@@ -41,6 +41,25 @@ struct mm_struct;
 
 #ifndef __ASSEMBLY__
 
+#ifdef CONFIG_PPC32
+static inline pmd_t *pmd_ptr(struct mm_struct *mm, unsigned long va)
+{
+	return pmd_offset(pud_offset(pgd_offset(mm, va), va), va);
+}
+
+static inline pmd_t *pmd_ptr_k(unsigned long va)
+{
+	return pmd_offset(pud_offset(pgd_offset_k(va), va), va);
+}
+
+static inline pte_t *virt_to_kpte(unsigned long vaddr)
+{
+	pmd_t *pmd = pmd_ptr_k(vaddr);
+
+	return pmd_none(*pmd) ? NULL : pte_offset_kernel(pmd, vaddr);
+}
+#endif
+
 #include <asm/tlbflush.h>
 
 /* Keep these as a macros to avoid include dependency mess */
diff --git a/arch/powerpc/include/asm/ptrace.h b/arch/powerpc/include/asm/ptrace.h
index ee3ada6..e0195e6 100644
--- a/arch/powerpc/include/asm/ptrace.h
+++ b/arch/powerpc/include/asm/ptrace.h
@@ -138,6 +138,9 @@ extern unsigned long profile_pc(struct pt_regs *regs);
 #define profile_pc(regs) instruction_pointer(regs)
 #endif
 
+long do_syscall_trace_enter(struct pt_regs *regs);
+void do_syscall_trace_leave(struct pt_regs *regs);
+
 #define kernel_stack_pointer(regs) ((regs)->gpr[1])
 static inline int is_syscall_success(struct pt_regs *regs)
 {
@@ -276,6 +279,8 @@ static inline unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs,
 #endif /* __ASSEMBLY__ */
 
 #ifndef __powerpc64__
+/* We need PT_SOFTE defined at all time to avoid #ifdefs */
+#define PT_SOFTE PT_MQ
 #else /* __powerpc64__ */
 #define PT_FPSCR32 (PT_FPR0 + 2*32 + 1)	/* each FP reg occupies 2 32-bit userspace slots */
 #define PT_VR0_32 164	/* each Vector reg occupies 4 slots in 32-bit */
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index 1aa46df..da5cab0 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -1448,7 +1448,9 @@ static inline void mtsrin(u32 val, u32 idx)
 
 #define proc_trap()	asm volatile("trap")
 
-extern unsigned long current_stack_pointer(void);
+extern unsigned long current_stack_frame(void);
+
+register unsigned long current_stack_pointer asm("r1");
 
 extern unsigned long scom970_read(unsigned int address);
 extern void scom970_write(unsigned int address, unsigned long value);
diff --git a/arch/powerpc/include/asm/setjmp.h b/arch/powerpc/include/asm/setjmp.h
index e9f81bb..f798e80 100644
--- a/arch/powerpc/include/asm/setjmp.h
+++ b/arch/powerpc/include/asm/setjmp.h
@@ -7,7 +7,9 @@
 
 #define JMP_BUF_LEN    23
 
-extern long setjmp(long *) __attribute__((returns_twice));
-extern void longjmp(long *, long) __attribute__((noreturn));
+typedef long jmp_buf[JMP_BUF_LEN];
+
+extern int setjmp(jmp_buf env) __attribute__((returns_twice));
+extern void longjmp(jmp_buf env, int val) __attribute__((noreturn));
 
 #endif /* _ASM_POWERPC_SETJMP_H */
diff --git a/arch/powerpc/include/asm/signal.h b/arch/powerpc/include/asm/signal.h
index 0803ca8b..99e1c6d 100644
--- a/arch/powerpc/include/asm/signal.h
+++ b/arch/powerpc/include/asm/signal.h
@@ -6,4 +6,7 @@
 #include <uapi/asm/signal.h>
 #include <uapi/asm/ptrace.h>
 
+struct pt_regs;
+void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags);
+
 #endif /* _ASM_POWERPC_SIGNAL_H */
diff --git a/arch/powerpc/include/asm/sparsemem.h b/arch/powerpc/include/asm/sparsemem.h
index 3192d45..c89b324 100644
--- a/arch/powerpc/include/asm/sparsemem.h
+++ b/arch/powerpc/include/asm/sparsemem.h
@@ -13,7 +13,8 @@
 #endif /* CONFIG_SPARSEMEM */
 
 #ifdef CONFIG_MEMORY_HOTPLUG
-extern int create_section_mapping(unsigned long start, unsigned long end, int nid);
+extern int create_section_mapping(unsigned long start, unsigned long end,
+				  int nid, pgprot_t prot);
 extern int remove_section_mapping(unsigned long start, unsigned long end);
 
 #ifdef CONFIG_PPC_BOOK3S_64
diff --git a/arch/powerpc/include/asm/switch_to.h b/arch/powerpc/include/asm/switch_to.h
index 5b03d8a..b867b58 100644
--- a/arch/powerpc/include/asm/switch_to.h
+++ b/arch/powerpc/include/asm/switch_to.h
@@ -5,6 +5,7 @@
 #ifndef _ASM_POWERPC_SWITCH_TO_H
 #define _ASM_POWERPC_SWITCH_TO_H
 
+#include <linux/sched.h>
 #include <asm/reg.h>
 
 struct thread_struct;
@@ -22,6 +23,16 @@ extern void switch_booke_debug_regs(struct debug_reg *new_debug);
 
 extern int emulate_altivec(struct pt_regs *);
 
+#ifdef CONFIG_PPC_BOOK3S_64
+void restore_math(struct pt_regs *regs);
+#else
+static inline void restore_math(struct pt_regs *regs)
+{
+}
+#endif
+
+void restore_tm_state(struct pt_regs *regs);
+
 extern void flush_all_to_thread(struct task_struct *);
 extern void giveup_all(struct task_struct *);
 
diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h
index a227074..ca6c970 100644
--- a/arch/powerpc/include/asm/thread_info.h
+++ b/arch/powerpc/include/asm/thread_info.h
@@ -162,10 +162,10 @@ static inline bool test_thread_local_flags(unsigned int flags)
 	return (ti->local_flags & flags) != 0;
 }
 
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_COMPAT
 #define is_32bit_task()	(test_thread_flag(TIF_32BIT))
 #else
-#define is_32bit_task()	(1)
+#define is_32bit_task()	(IS_ENABLED(CONFIG_PPC32))
 #endif
 
 #if defined(CONFIG_PPC64)
diff --git a/arch/powerpc/include/asm/time.h b/arch/powerpc/include/asm/time.h
index 08dbe3e..39ce950 100644
--- a/arch/powerpc/include/asm/time.h
+++ b/arch/powerpc/include/asm/time.h
@@ -24,7 +24,6 @@ extern struct clock_event_device decrementer_clockevent;
 
 
 extern void generic_calibrate_decr(void);
-extern void hdec_interrupt(struct pt_regs *regs);
 
 /* Some sane defaults: 125 MHz timebase, 1GHz processor */
 extern unsigned long ppc_proc_freq;
@@ -195,5 +194,8 @@ DECLARE_PER_CPU(u64, decrementers_next_tb);
 /* Convert timebase ticks to nanoseconds */
 unsigned long long tb_to_ns(unsigned long long tb_ticks);
 
+/* SPLPAR */
+void accumulate_stolen_time(void);
+
 #endif /* __KERNEL__ */
 #endif /* __POWERPC_TIME_H */
diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h
index 2f7e1ea..2db7ba7 100644
--- a/arch/powerpc/include/asm/topology.h
+++ b/arch/powerpc/include/asm/topology.h
@@ -98,7 +98,6 @@ extern int stop_topology_update(void);
 extern int prrn_is_enabled(void);
 extern int find_and_online_cpu_nid(int cpu);
 extern int timed_topology_update(int nsecs);
-extern void __init shared_proc_topology_init(void);
 #else
 static inline int start_topology_update(void)
 {
@@ -121,9 +120,6 @@ static inline int timed_topology_update(int nsecs)
 	return 0;
 }
 
-#ifdef CONFIG_SMP
-static inline void shared_proc_topology_init(void) {}
-#endif
 #endif /* CONFIG_NUMA && CONFIG_PPC_SPLPAR */
 
 #include <asm-generic/topology.h>
@@ -134,7 +130,13 @@ static inline void shared_proc_topology_init(void) {}
 #ifdef CONFIG_PPC64
 #include <asm/smp.h>
 
+#ifdef CONFIG_PPC_SPLPAR
+int get_physical_package_id(int cpu);
+#define topology_physical_package_id(cpu)	(get_physical_package_id(cpu))
+#else
 #define topology_physical_package_id(cpu)	(cpu_to_chip_id(cpu))
+#endif
+
 #define topology_sibling_cpumask(cpu)	(per_cpu(cpu_sibling_map, cpu))
 #define topology_core_cpumask(cpu)	(per_cpu(cpu_core_map, cpu))
 #define topology_core_id(cpu)		(cpu_to_core_id(cpu))
diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h
index b0720c7..700fcda 100644
--- a/arch/powerpc/include/asm/unistd.h
+++ b/arch/powerpc/include/asm/unistd.h
@@ -31,6 +31,7 @@
 #define __ARCH_WANT_SYS_SOCKETCALL
 #define __ARCH_WANT_SYS_FADVISE64
 #define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
 #define __ARCH_WANT_SYS_NICE
 #define __ARCH_WANT_SYS_OLD_GETRLIMIT
 #define __ARCH_WANT_SYS_OLD_UNAME
diff --git a/arch/powerpc/include/asm/vdso.h b/arch/powerpc/include/asm/vdso.h
index b5e1f8f..2ff8848 100644
--- a/arch/powerpc/include/asm/vdso.h
+++ b/arch/powerpc/include/asm/vdso.h
@@ -13,9 +13,6 @@
 
 #define VDSO_VERSION_STRING	LINUX_2.6.15
 
-/* Define if 64 bits VDSO has procedure descriptors */
-#undef VDS64_HAS_DESCRIPTORS
-
 #ifndef __ASSEMBLY__
 
 /* Offsets relative to thread->vdso_base */
@@ -28,25 +25,6 @@ int vdso_getcpu_init(void);
 #else /* __ASSEMBLY__ */
 
 #ifdef __VDSO64__
-#ifdef VDS64_HAS_DESCRIPTORS
-#define V_FUNCTION_BEGIN(name)		\
-	.globl name;			\
-        .section ".opd","a";		\
-        .align 3;			\
-	name:				\
-	.quad .name,.TOC.@tocbase,0;	\
-	.previous;			\
-	.globl .name;			\
-	.type .name,@function; 		\
-	.name:				\
-
-#define V_FUNCTION_END(name)		\
-	.size .name,.-.name;
-
-#define V_LOCAL_FUNC(name) (.name)
-
-#else /* VDS64_HAS_DESCRIPTORS */
-
 #define V_FUNCTION_BEGIN(name)		\
 	.globl name;			\
 	name:				\
@@ -55,8 +33,6 @@ int vdso_getcpu_init(void);
 	.size name,.-name;
 
 #define V_LOCAL_FUNC(name) (name)
-
-#endif /* VDS64_HAS_DESCRIPTORS */
 #endif /* __VDSO64__ */
 
 #ifdef __VDSO32__
diff --git a/arch/powerpc/kernel/.gitignore b/arch/powerpc/kernel/.gitignore
index 67ebd30..d71179d 100644
--- a/arch/powerpc/kernel/.gitignore
+++ b/arch/powerpc/kernel/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 prom_init_check
 vmlinux.lds
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 78a1b22..1c43858 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -3,8 +3,6 @@
 # Makefile for the linux kernel.
 #
 
-CFLAGS_ptrace.o		+= -DUTS_MACHINE='"$(UTS_MACHINE)"'
-
 ifdef CONFIG_PPC64
 CFLAGS_prom_init.o	+= $(NO_MINIMAL_TOC)
 endif
@@ -41,16 +39,18 @@
 CFLAGS_btext.o += -DDISABLE_BRANCH_PROFILING
 endif
 
-obj-y				:= cputable.o ptrace.o syscalls.o \
-				   irq.o align.o signal_32.o pmc.o vdso.o \
+obj-y				:= cputable.o syscalls.o \
+				   irq.o align.o signal_$(BITS).o pmc.o vdso.o \
 				   process.o systbl.o idle.o \
 				   signal.o sysfs.o cacheinfo.o time.o \
 				   prom.o traps.o setup-common.o \
 				   udbg.o misc.o io.o misc_$(BITS).o \
 				   of_platform.o prom_parse.o
-obj-$(CONFIG_PPC64)		+= setup_64.o sys_ppc32.o \
-				   signal_64.o ptrace32.o \
-				   paca.o nvram_64.o firmware.o note.o
+obj-y				+= ptrace/
+obj-$(CONFIG_PPC64)		+= setup_64.o \
+				   paca.o nvram_64.o firmware.o note.o \
+				   syscall_64.o
+obj-$(CONFIG_COMPAT)		+= sys_ppc32.o signal_32.o
 obj-$(CONFIG_VDSO32)		+= vdso32/
 obj-$(CONFIG_PPC_WATCHDOG)	+= watchdog.o
 obj-$(CONFIG_HAVE_HW_BREAKPOINT)	+= hw_breakpoint.o
diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c
index 6dfceaa..f57712a 100644
--- a/arch/powerpc/kernel/btext.c
+++ b/arch/powerpc/kernel/btext.c
@@ -26,7 +26,7 @@
 static void scrollscreen(void);
 #endif
 
-#define __force_data __attribute__((__section__(".data")))
+#define __force_data __section(.data)
 
 static int g_loc_X __force_data;
 static int g_loc_Y __force_data;
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 245be4f..13eba2e 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -2198,7 +2198,6 @@ static struct cpu_spec * __init setup_cpu_spec(unsigned long offset,
 		 */
 		if (old.oprofile_cpu_type != NULL) {
 			t->oprofile_cpu_type = old.oprofile_cpu_type;
-			t->oprofile_type = old.oprofile_type;
 			t->cpu_features |= old.cpu_features & CPU_FTR_PMAO_BUG;
 		}
 	}
diff --git a/arch/powerpc/kernel/dt_cpu_ftrs.c b/arch/powerpc/kernel/dt_cpu_ftrs.c
index 182b404..36bc0d5 100644
--- a/arch/powerpc/kernel/dt_cpu_ftrs.c
+++ b/arch/powerpc/kernel/dt_cpu_ftrs.c
@@ -139,7 +139,6 @@ static void __init cpufeatures_setup_cpu(void)
 	/* Initialize the base environment -- clear FSCR/HFSCR.  */
 	hv_mode = !!(mfmsr() & MSR_HV);
 	if (hv_mode) {
-		/* CPU_FTR_HVMODE is used early in PACA setup */
 		cur_cpu_spec->cpu_features |= CPU_FTR_HVMODE;
 		mtspr(SPRN_HFSCR, 0);
 	}
diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index 17cb3e9..7cdcb41 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -1107,87 +1107,43 @@ static int eeh_init(void)
 core_initcall_sync(eeh_init);
 
 /**
- * eeh_add_device_early - Enable EEH for the indicated device node
- * @pdn: PCI device node for which to set up EEH
- *
- * This routine must be used to perform EEH initialization for PCI
- * devices that were added after system boot (e.g. hotplug, dlpar).
- * This routine must be called before any i/o is performed to the
- * adapter (inluding any config-space i/o).
- * Whether this actually enables EEH or not for this device depends
- * on the CEC architecture, type of the device, on earlier boot
- * command-line arguments & etc.
- */
-void eeh_add_device_early(struct pci_dn *pdn)
-{
-	struct pci_controller *phb = pdn ? pdn->phb : NULL;
-	struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
-
-	if (!edev)
-		return;
-
-	if (!eeh_has_flag(EEH_PROBE_MODE_DEVTREE))
-		return;
-
-	/* USB Bus children of PCI devices will not have BUID's */
-	if (NULL == phb ||
-	    (eeh_has_flag(EEH_PROBE_MODE_DEVTREE) && 0 == phb->buid))
-		return;
-
-	eeh_ops->probe(pdn, NULL);
-}
-
-/**
- * eeh_add_device_tree_early - Enable EEH for the indicated device
- * @pdn: PCI device node
- *
- * This routine must be used to perform EEH initialization for the
- * indicated PCI device that was added after system boot (e.g.
- * hotplug, dlpar).
- */
-void eeh_add_device_tree_early(struct pci_dn *pdn)
-{
-	struct pci_dn *n;
-
-	if (!pdn)
-		return;
-
-	list_for_each_entry(n, &pdn->child_list, list)
-		eeh_add_device_tree_early(n);
-	eeh_add_device_early(pdn);
-}
-EXPORT_SYMBOL_GPL(eeh_add_device_tree_early);
-
-/**
- * eeh_add_device_late - Perform EEH initialization for the indicated pci device
+ * eeh_probe_device() - Perform EEH initialization for the indicated pci device
  * @dev: pci device for which to set up EEH
  *
  * This routine must be used to complete EEH initialization for PCI
  * devices that were added after system boot (e.g. hotplug, dlpar).
  */
-void eeh_add_device_late(struct pci_dev *dev)
+void eeh_probe_device(struct pci_dev *dev)
 {
-	struct pci_dn *pdn;
 	struct eeh_dev *edev;
 
-	if (!dev)
-		return;
+	pr_debug("EEH: Adding device %s\n", pci_name(dev));
 
-	pdn = pci_get_pdn_by_devfn(dev->bus, dev->devfn);
-	edev = pdn_to_eeh_dev(pdn);
-	eeh_edev_dbg(edev, "Adding device\n");
-	if (edev->pdev == dev) {
-		eeh_edev_dbg(edev, "Device already referenced!\n");
+	/*
+	 * pci_dev_to_eeh_dev() can only work if eeh_probe_dev() was
+	 * already called for this device.
+	 */
+	if (WARN_ON_ONCE(pci_dev_to_eeh_dev(dev))) {
+		pci_dbg(dev, "Already bound to an eeh_dev!\n");
+		return;
+	}
+
+	edev = eeh_ops->probe(dev);
+	if (!edev) {
+		pr_debug("EEH: Adding device failed\n");
 		return;
 	}
 
 	/*
-	 * The EEH cache might not be removed correctly because of
-	 * unbalanced kref to the device during unplug time, which
-	 * relies on pcibios_release_device(). So we have to remove
-	 * that here explicitly.
+	 * FIXME: We rely on pcibios_release_device() to remove the
+	 * existing EEH state. The release function is only called if
+	 * the pci_dev's refcount drops to zero so if something is
+	 * keeping a ref to a device (e.g. a filesystem) we need to
+	 * remove the old EEH state.
+	 *
+	 * FIXME: HEY MA, LOOK AT ME, NO LOCKING!
 	 */
-	if (edev->pdev) {
+	if (edev->pdev && edev->pdev != dev) {
 		eeh_rmv_from_parent_pe(edev);
 		eeh_addr_cache_rmv_dev(edev->pdev);
 		eeh_sysfs_remove_device(edev->pdev);
@@ -1198,69 +1154,16 @@ void eeh_add_device_late(struct pci_dev *dev)
 		 * into error handler afterwards.
 		 */
 		edev->mode |= EEH_DEV_NO_HANDLER;
-
-		edev->pdev = NULL;
-		dev->dev.archdata.edev = NULL;
 	}
 
-	if (eeh_has_flag(EEH_PROBE_MODE_DEV))
-		eeh_ops->probe(pdn, NULL);
-
+	/* bind the pdev and the edev together */
 	edev->pdev = dev;
 	dev->dev.archdata.edev = edev;
-
 	eeh_addr_cache_insert_dev(dev);
+	eeh_sysfs_add_device(dev);
 }
 
 /**
- * eeh_add_device_tree_late - Perform EEH initialization for the indicated PCI bus
- * @bus: PCI bus
- *
- * This routine must be used to perform EEH initialization for PCI
- * devices which are attached to the indicated PCI bus. The PCI bus
- * is added after system boot through hotplug or dlpar.
- */
-void eeh_add_device_tree_late(struct pci_bus *bus)
-{
-	struct pci_dev *dev;
-
-	if (eeh_has_flag(EEH_FORCE_DISABLED))
-		return;
-	list_for_each_entry(dev, &bus->devices, bus_list) {
-		eeh_add_device_late(dev);
-		if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
-			struct pci_bus *subbus = dev->subordinate;
-			if (subbus)
-				eeh_add_device_tree_late(subbus);
-		}
-	}
-}
-EXPORT_SYMBOL_GPL(eeh_add_device_tree_late);
-
-/**
- * eeh_add_sysfs_files - Add EEH sysfs files for the indicated PCI bus
- * @bus: PCI bus
- *
- * This routine must be used to add EEH sysfs files for PCI
- * devices which are attached to the indicated PCI bus. The PCI bus
- * is added after system boot through hotplug or dlpar.
- */
-void eeh_add_sysfs_files(struct pci_bus *bus)
-{
-	struct pci_dev *dev;
-
-	list_for_each_entry(dev, &bus->devices, bus_list) {
-		eeh_sysfs_add_device(dev);
-		if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
-			struct pci_bus *subbus = dev->subordinate;
-			if (subbus)
-				eeh_add_sysfs_files(subbus);
-		}
-	}
-}
-EXPORT_SYMBOL_GPL(eeh_add_sysfs_files);
-
-/**
  * eeh_remove_device - Undo EEH setup for the indicated pci device
  * @dev: pci device to be removed
  *
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 16af0d8..a6371fb 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -246,9 +246,8 @@
 	 * r3 can be different from GPR3(r1) at this point, r9 and r11
 	 * contains the old MSR and handler address respectively,
 	 * r4 & r5 can contain page fault arguments that need to be passed
-	 * along as well. r12, CCR, CTR, XER etc... are left clobbered as
-	 * they aren't useful past this point (aren't syscall arguments),
-	 * the rest is restored from the exception frame.
+	 * along as well. r0, r6-r8, r12, CCR, CTR, XER etc... are left
+	 * clobbered as they aren't useful past this point.
 	 */
 
 	stwu	r1,-32(r1)
@@ -262,16 +261,12 @@
 	 * lockdep
 	 */
 1:	bl	trace_hardirqs_off
-2:	lwz	r5,24(r1)
+	lwz	r5,24(r1)
 	lwz	r4,20(r1)
 	lwz	r3,16(r1)
 	lwz	r11,12(r1)
 	lwz	r9,8(r1)
 	addi	r1,r1,32
-	lwz	r0,GPR0(r1)
-	lwz	r6,GPR6(r1)
-	lwz	r7,GPR7(r1)
-	lwz	r8,GPR8(r1)
 	mtctr	r11
 	mtlr	r9
 	bctr				/* jump to handler */
@@ -575,6 +570,33 @@
 	bl	do_syscall_trace_leave
 	b	ret_from_except_full
 
+	/*
+	 * System call was called from kernel. We get here with SRR1 in r9.
+	 * Mark the exception as recoverable once we have retrieved SRR0,
+	 * trap a warning and return ENOSYS with CR[SO] set.
+	 */
+	.globl	ret_from_kernel_syscall
+ret_from_kernel_syscall:
+	mfspr	r9, SPRN_SRR0
+	mfspr	r10, SPRN_SRR1
+#if !defined(CONFIG_4xx) && !defined(CONFIG_BOOKE)
+	LOAD_REG_IMMEDIATE(r11, MSR_KERNEL & ~(MSR_IR|MSR_DR))
+	mtmsr	r11
+#endif
+
+0:	trap
+	EMIT_BUG_ENTRY 0b,__FILE__,__LINE__, BUGFLAG_WARNING
+
+	li	r3, ENOSYS
+	crset	so
+#if defined(CONFIG_PPC_8xx) && defined(CONFIG_PERF_EVENTS)
+	mtspr	SPRN_NRI, r0
+#endif
+	mtspr	SPRN_SRR0, r9
+	mtspr	SPRN_SRR1, r10
+	SYNC
+	RFI
+
 /*
  * The fork/clone functions need to copy the full register set into
  * the child process. Therefore we need to save all the nonvolatile
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 6ba675b..9a1e5d6 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -16,6 +16,7 @@
 
 #include <linux/errno.h>
 #include <linux/err.h>
+#include <asm/cache.h>
 #include <asm/unistd.h>
 #include <asm/processor.h>
 #include <asm/page.h>
@@ -51,8 +52,10 @@
 SYS_CALL_TABLE:
 	.tc sys_call_table[TC],sys_call_table
 
+#ifdef CONFIG_COMPAT
 COMPAT_SYS_CALL_TABLE:
 	.tc compat_sys_call_table[TC],compat_sys_call_table
+#endif
 
 /* This value is used to mark exception frames on the stack. */
 exception_marker:
@@ -69,6 +72,7 @@
 	bne	.Ltabort_syscall
 END_FTR_SECTION_IFSET(CPU_FTR_TM)
 #endif
+_ASM_NOKPROBE_SYMBOL(system_call_common)
 	mr	r10,r1
 	ld	r1,PACAKSAVE(r13)
 	std	r10,0(r1)
@@ -76,342 +80,122 @@
 	std	r12,_MSR(r1)
 	std	r0,GPR0(r1)
 	std	r10,GPR1(r1)
+	std	r2,GPR2(r1)
 #ifdef CONFIG_PPC_FSL_BOOK3E
 START_BTB_FLUSH_SECTION
 	BTB_FLUSH(r10)
 END_BTB_FLUSH_SECTION
 #endif
-	ACCOUNT_CPU_USER_ENTRY(r13, r10, r11)
-	std	r2,GPR2(r1)
+	ld	r2,PACATOC(r13)
+	mfcr	r12
+	li	r11,0
+	/* Can we avoid saving r3-r8 in common case? */
 	std	r3,GPR3(r1)
-	mfcr	r2
 	std	r4,GPR4(r1)
 	std	r5,GPR5(r1)
 	std	r6,GPR6(r1)
 	std	r7,GPR7(r1)
 	std	r8,GPR8(r1)
-	li	r11,0
+	/* Zero r9-r12, this should only be required when restoring all GPRs */
 	std	r11,GPR9(r1)
 	std	r11,GPR10(r1)
 	std	r11,GPR11(r1)
 	std	r11,GPR12(r1)
+	std	r9,GPR13(r1)
+	SAVE_NVGPRS(r1)
 	std	r11,_XER(r1)
 	std	r11,_CTR(r1)
-	std	r9,GPR13(r1)
 	mflr	r10
+
 	/*
 	 * This clears CR0.SO (bit 28), which is the error indication on
 	 * return from this system call.
 	 */
-	rldimi	r2,r11,28,(63-28)
-	li	r11,0xc01
+	rldimi	r12,r11,28,(63-28)
+	li	r11,0xc00
 	std	r10,_LINK(r1)
 	std	r11,_TRAP(r1)
+	std	r12,_CCR(r1)
 	std	r3,ORIG_GPR3(r1)
-	std	r2,_CCR(r1)
-	ld	r2,PACATOC(r13)
-	addi	r9,r1,STACK_FRAME_OVERHEAD
+	addi	r10,r1,STACK_FRAME_OVERHEAD
 	ld	r11,exception_marker@toc(r2)
-	std	r11,-16(r9)		/* "regshere" marker */
-
-	kuap_check_amr r10, r11
-
-#if defined(CONFIG_VIRT_CPU_ACCOUNTING_NATIVE) && defined(CONFIG_PPC_SPLPAR)
-BEGIN_FW_FTR_SECTION
-	/* see if there are any DTL entries to process */
-	ld	r10,PACALPPACAPTR(r13)	/* get ptr to VPA */
-	ld	r11,PACA_DTL_RIDX(r13)	/* get log read index */
-	addi	r10,r10,LPPACA_DTLIDX
-	LDX_BE	r10,0,r10		/* get log write index */
-	cmpd	r11,r10
-	beq+	33f
-	bl	accumulate_stolen_time
-	REST_GPR(0,r1)
-	REST_4GPRS(3,r1)
-	REST_2GPRS(7,r1)
-	addi	r9,r1,STACK_FRAME_OVERHEAD
-33:
-END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR)
-#endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE && CONFIG_PPC_SPLPAR */
+	std	r11,-16(r10)		/* "regshere" marker */
 
 	/*
-	 * A syscall should always be called with interrupts enabled
-	 * so we just unconditionally hard-enable here. When some kind
-	 * of irq tracing is used, we additionally check that condition
-	 * is correct
+	 * RECONCILE_IRQ_STATE without calling trace_hardirqs_off(), which
+	 * would clobber syscall parameters. Also we always enter with IRQs
+	 * enabled and nothing pending. system_call_exception() will call
+	 * trace_hardirqs_off().
 	 */
-#if defined(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG) && defined(CONFIG_BUG)
-	lbz	r10,PACAIRQSOFTMASK(r13)
-1:	tdnei	r10,IRQS_ENABLED
-	EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,BUGFLAG_WARNING
-#endif
+	li	r11,IRQS_ALL_DISABLED
+	li	r12,PACA_IRQ_HARD_DIS
+	stb	r11,PACAIRQSOFTMASK(r13)
+	stb	r12,PACAIRQHAPPENED(r13)
 
-#ifdef CONFIG_PPC_BOOK3E
-	wrteei	1
-#else
-	li	r11,MSR_RI
-	ori	r11,r11,MSR_EE
-	mtmsrd	r11,1
-#endif /* CONFIG_PPC_BOOK3E */
+	/* Calling convention has r9 = orig r0, r10 = regs */
+	mr	r9,r0
+	bl	system_call_exception
 
-system_call:			/* label this so stack traces look sane */
-	/* We do need to set SOFTE in the stack frame or the return
-	 * from interrupt will be painful
-	 */
-	li	r10,IRQS_ENABLED
-	std	r10,SOFTE(r1)
-
-	ld	r11, PACA_THREAD_INFO(r13)
-	ld	r10,TI_FLAGS(r11)
-	andi.	r11,r10,_TIF_SYSCALL_DOTRACE
-	bne	.Lsyscall_dotrace		/* does not return */
-	cmpldi	0,r0,NR_syscalls
-	bge-	.Lsyscall_enosys
-
-.Lsyscall:
-/*
- * Need to vector to 32 Bit or default sys_call_table here,
- * based on caller's run-mode / personality.
- */
-	ld	r11,SYS_CALL_TABLE@toc(2)
-	andis.	r10,r10,_TIF_32BIT@h
-	beq	15f
-	ld	r11,COMPAT_SYS_CALL_TABLE@toc(2)
-	clrldi	r3,r3,32
-	clrldi	r4,r4,32
-	clrldi	r5,r5,32
-	clrldi	r6,r6,32
-	clrldi	r7,r7,32
-	clrldi	r8,r8,32
-15:
-	slwi	r0,r0,3
-
-	barrier_nospec_asm
-	/*
-	 * Prevent the load of the handler below (based on the user-passed
-	 * system call number) being speculatively executed until the test
-	 * against NR_syscalls and branch to .Lsyscall_enosys above has
-	 * committed.
-	 */
-
-	ldx	r12,r11,r0	/* Fetch system call handler [ptr] */
-	mtctr   r12
-	bctrl			/* Call handler */
-
-	/* syscall_exit can exit to kernel mode, via ret_from_kernel_thread */
 .Lsyscall_exit:
-	std	r3,RESULT(r1)
+	addi    r4,r1,STACK_FRAME_OVERHEAD
+	bl	syscall_exit_prepare
 
-#ifdef CONFIG_DEBUG_RSEQ
-	/* Check whether the syscall is issued inside a restartable sequence */
-	addi    r3,r1,STACK_FRAME_OVERHEAD
-	bl      rseq_syscall
-	ld	r3,RESULT(r1)
-#endif
+	ld	r2,_CCR(r1)
+	ld	r4,_NIP(r1)
+	ld	r5,_MSR(r1)
+	ld	r6,_LINK(r1)
 
-	ld	r12, PACA_THREAD_INFO(r13)
-
-	ld	r8,_MSR(r1)
-
-/*
- * This is a few instructions into the actual syscall exit path (which actually
- * starts at .Lsyscall_exit) to cater to kprobe blacklisting and to reduce the
- * number of visible symbols for profiling purposes.
- *
- * We can probe from system_call until this point as MSR_RI is set. But once it
- * is cleared below, we won't be able to take a trap.
- *
- * This is blacklisted from kprobes further below with _ASM_NOKPROBE_SYMBOL().
- */
-system_call_exit:
-	/*
-	 * Disable interrupts so current_thread_info()->flags can't change,
-	 * and so that we don't get interrupted after loading SRR0/1.
-	 *
-	 * Leave MSR_RI enabled for now, because with THREAD_INFO_IN_TASK we
-	 * could fault on the load of the TI_FLAGS below.
-	 */
-#ifdef CONFIG_PPC_BOOK3E
-	wrteei	0
-#else
-	li	r11,MSR_RI
-	mtmsrd	r11,1
-#endif /* CONFIG_PPC_BOOK3E */
-
-	ld	r9,TI_FLAGS(r12)
-	li	r11,-MAX_ERRNO
-	andi.	r0,r9,(_TIF_SYSCALL_DOTRACE|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK)
-	bne-	.Lsyscall_exit_work
-
-	andi.	r0,r8,MSR_FP
-	beq 2f
-#ifdef CONFIG_ALTIVEC
-	andis.	r0,r8,MSR_VEC@h
-	bne	3f
-#endif
-2:	addi    r3,r1,STACK_FRAME_OVERHEAD
-	bl	restore_math
-	ld	r8,_MSR(r1)
-	ld	r3,RESULT(r1)
-	li	r11,-MAX_ERRNO
-
-3:	cmpld	r3,r11
-	ld	r5,_CCR(r1)
-	bge-	.Lsyscall_error
-.Lsyscall_error_cont:
-	ld	r7,_NIP(r1)
 BEGIN_FTR_SECTION
 	stdcx.	r0,0,r1			/* to clear the reservation */
 END_FTR_SECTION_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS)
-	andi.	r6,r8,MSR_PR
-	ld	r4,_LINK(r1)
 
-	kuap_check_amr r10, r11
+	mtspr	SPRN_SRR0,r4
+	mtspr	SPRN_SRR1,r5
+	mtlr	r6
 
-#ifdef CONFIG_PPC_BOOK3S
-	/*
-	 * Clear MSR_RI, MSR_EE is already and remains disabled. We could do
-	 * this later, but testing shows that doing it here causes less slow
-	 * down than doing it closer to the rfid.
-	 */
+	cmpdi	r3,0
+	bne	.Lsyscall_restore_regs
+	/* Zero volatile regs that may contain sensitive kernel data */
+	li	r0,0
+	li	r4,0
+	li	r5,0
+	li	r6,0
+	li	r7,0
+	li	r8,0
+	li	r9,0
+	li	r10,0
 	li	r11,0
-	mtmsrd	r11,1
-#endif
-
-	beq-	1f
-	ACCOUNT_CPU_USER_EXIT(r13, r11, r12)
+	li	r12,0
+	mtctr	r0
+	mtspr	SPRN_XER,r0
+.Lsyscall_restore_regs_cont:
 
 BEGIN_FTR_SECTION
 	HMT_MEDIUM_LOW
 END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
 
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-	std	r8, PACATMSCRATCH(r13)
-#endif
-
 	/*
 	 * We don't need to restore AMR on the way back to userspace for KUAP.
 	 * The value of AMR only matters while we're in the kernel.
 	 */
-	ld	r13,GPR13(r1)	/* only restore r13 if returning to usermode */
+	mtcr	r2
 	ld	r2,GPR2(r1)
+	ld	r3,GPR3(r1)
+	ld	r13,GPR13(r1)
 	ld	r1,GPR1(r1)
-	mtlr	r4
-	mtcr	r5
-	mtspr	SPRN_SRR0,r7
-	mtspr	SPRN_SRR1,r8
 	RFI_TO_USER
 	b	.	/* prevent speculative execution */
 
-1:	/* exit to kernel */
-	kuap_restore_amr r2
-
-	ld	r2,GPR2(r1)
-	ld	r1,GPR1(r1)
-	mtlr	r4
-	mtcr	r5
-	mtspr	SPRN_SRR0,r7
-	mtspr	SPRN_SRR1,r8
-	RFI_TO_KERNEL
-	b	.	/* prevent speculative execution */
-
-.Lsyscall_error:
-	oris	r5,r5,0x1000	/* Set SO bit in CR */
-	neg	r3,r3
-	std	r5,_CCR(r1)
-	b	.Lsyscall_error_cont
-
-/* Traced system call support */
-.Lsyscall_dotrace:
-	bl	save_nvgprs
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	do_syscall_trace_enter
-
-	/*
-	 * We use the return value of do_syscall_trace_enter() as the syscall
-	 * number. If the syscall was rejected for any reason do_syscall_trace_enter()
-	 * returns an invalid syscall number and the test below against
-	 * NR_syscalls will fail.
-	 */
-	mr	r0,r3
-
-	/* Restore argument registers just clobbered and/or possibly changed. */
-	ld	r3,GPR3(r1)
-	ld	r4,GPR4(r1)
-	ld	r5,GPR5(r1)
-	ld	r6,GPR6(r1)
-	ld	r7,GPR7(r1)
-	ld	r8,GPR8(r1)
-
-	/* Repopulate r9 and r10 for the syscall path */
-	addi	r9,r1,STACK_FRAME_OVERHEAD
-	ld	r10, PACA_THREAD_INFO(r13)
-	ld	r10,TI_FLAGS(r10)
-
-	cmpldi	r0,NR_syscalls
-	blt+	.Lsyscall
-
-	/* Return code is already in r3 thanks to do_syscall_trace_enter() */
-	b	.Lsyscall_exit
-
-
-.Lsyscall_enosys:
-	li	r3,-ENOSYS
-	b	.Lsyscall_exit
-	
-.Lsyscall_exit_work:
-	/* If TIF_RESTOREALL is set, don't scribble on either r3 or ccr.
-	 If TIF_NOERROR is set, just save r3 as it is. */
-
-	andi.	r0,r9,_TIF_RESTOREALL
-	beq+	0f
+.Lsyscall_restore_regs:
+	ld	r3,_CTR(r1)
+	ld	r4,_XER(r1)
 	REST_NVGPRS(r1)
-	b	2f
-0:	cmpld	r3,r11		/* r11 is -MAX_ERRNO */
-	blt+	1f
-	andi.	r0,r9,_TIF_NOERROR
-	bne-	1f
-	ld	r5,_CCR(r1)
-	neg	r3,r3
-	oris	r5,r5,0x1000	/* Set SO bit in CR */
-	std	r5,_CCR(r1)
-1:	std	r3,GPR3(r1)
-2:	andi.	r0,r9,(_TIF_PERSYSCALL_MASK)
-	beq	4f
-
-	/* Clear per-syscall TIF flags if any are set.  */
-
-	li	r11,_TIF_PERSYSCALL_MASK
-	addi	r12,r12,TI_FLAGS
-3:	ldarx	r10,0,r12
-	andc	r10,r10,r11
-	stdcx.	r10,0,r12
-	bne-	3b
-	subi	r12,r12,TI_FLAGS
-
-4:	/* Anything else left to do? */
-BEGIN_FTR_SECTION
-	lis	r3,DEFAULT_PPR@highest	/* Set default PPR */
-	sldi	r3,r3,32	/* bits 11-13 are used for ppr */
-	std	r3,_PPR(r1)
-END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
-
-	andi.	r0,r9,(_TIF_SYSCALL_DOTRACE|_TIF_SINGLESTEP)
-	beq	ret_from_except_lite
-
-	/* Re-enable interrupts */
-#ifdef CONFIG_PPC_BOOK3E
-	wrteei	1
-#else
-	li	r10,MSR_RI
-	ori	r10,r10,MSR_EE
-	mtmsrd	r10,1
-#endif /* CONFIG_PPC_BOOK3E */
-
-	bl	save_nvgprs
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	do_syscall_trace_leave
-	b	ret_from_except
+	mtctr	r3
+	mtspr	SPRN_XER,r4
+	ld	r0,GPR0(r1)
+	REST_8GPRS(4, r1)
+	ld	r12,GPR12(r1)
+	b	.Lsyscall_restore_regs_cont
 
 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
 .Ltabort_syscall:
@@ -439,64 +223,6 @@
 	RFI_TO_USER
 	b	.	/* prevent speculative execution */
 #endif
-_ASM_NOKPROBE_SYMBOL(system_call_common);
-_ASM_NOKPROBE_SYMBOL(system_call_exit);
-
-/* Save non-volatile GPRs, if not already saved. */
-_GLOBAL(save_nvgprs)
-	ld	r11,_TRAP(r1)
-	andi.	r0,r11,1
-	beqlr-
-	SAVE_NVGPRS(r1)
-	clrrdi	r0,r11,1
-	std	r0,_TRAP(r1)
-	blr
-_ASM_NOKPROBE_SYMBOL(save_nvgprs);
-
-	
-/*
- * The sigsuspend and rt_sigsuspend system calls can call do_signal
- * and thus put the process into the stopped state where we might
- * want to examine its user state with ptrace.  Therefore we need
- * to save all the nonvolatile registers (r14 - r31) before calling
- * the C code.  Similarly, fork, vfork and clone need the full
- * register state on the stack so that it can be copied to the child.
- */
-
-_GLOBAL(ppc_fork)
-	bl	save_nvgprs
-	bl	sys_fork
-	b	.Lsyscall_exit
-
-_GLOBAL(ppc_vfork)
-	bl	save_nvgprs
-	bl	sys_vfork
-	b	.Lsyscall_exit
-
-_GLOBAL(ppc_clone)
-	bl	save_nvgprs
-	bl	sys_clone
-	b	.Lsyscall_exit
-
-_GLOBAL(ppc_clone3)
-       bl      save_nvgprs
-       bl      sys_clone3
-       b       .Lsyscall_exit
-
-_GLOBAL(ppc32_swapcontext)
-	bl	save_nvgprs
-	bl	compat_sys_swapcontext
-	b	.Lsyscall_exit
-
-_GLOBAL(ppc64_swapcontext)
-	bl	save_nvgprs
-	bl	sys_swapcontext
-	b	.Lsyscall_exit
-
-_GLOBAL(ppc_switch_endian)
-	bl	save_nvgprs
-	bl	sys_switch_endian
-	b	.Lsyscall_exit
 
 _GLOBAL(ret_from_fork)
 	bl	schedule_tail
@@ -516,6 +242,19 @@
 	li	r3,0
 	b	.Lsyscall_exit
 
+#ifdef CONFIG_PPC_BOOK3E
+/* Save non-volatile GPRs, if not already saved. */
+_GLOBAL(save_nvgprs)
+	ld	r11,_TRAP(r1)
+	andi.	r0,r11,1
+	beqlr-
+	SAVE_NVGPRS(r1)
+	clrrdi	r0,r11,1
+	std	r0,_TRAP(r1)
+	blr
+_ASM_NOKPROBE_SYMBOL(save_nvgprs);
+#endif
+
 #ifdef CONFIG_PPC_BOOK3S_64
 
 #define FLUSH_COUNT_CACHE	\
@@ -578,7 +317,7 @@
  * state of one is saved on its kernel stack.  Then the state
  * of the other is restored from its kernel stack.  The memory
  * management hardware is updated to the second process's state.
- * Finally, we can return to the second process, via ret_from_except.
+ * Finally, we can return to the second process, via interrupt_return.
  * On entry, r3 points to the THREAD for the current task, r4
  * points to the THREAD for the new task.
  *
@@ -730,408 +469,146 @@
 	addi	r1,r1,SWITCH_FRAME_SIZE
 	blr
 
-	.align	7
-_GLOBAL(ret_from_except)
-	ld	r11,_TRAP(r1)
-	andi.	r0,r11,1
-	bne	ret_from_except_lite
-	REST_NVGPRS(r1)
-
-_GLOBAL(ret_from_except_lite)
+#ifdef CONFIG_PPC_BOOK3S
 	/*
-	 * Disable interrupts so that current_thread_info()->flags
-	 * can't change between when we test it and when we return
-	 * from the interrupt.
+	 * If MSR EE/RI was never enabled, IRQs not reconciled, NVGPRs not
+	 * touched, AMR not set, no exit work created, then this can be used.
 	 */
-#ifdef CONFIG_PPC_BOOK3E
-	wrteei	0
-#else
-	li	r10,MSR_RI
-	mtmsrd	r10,1		  /* Update machine state */
-#endif /* CONFIG_PPC_BOOK3E */
-
-	ld	r9, PACA_THREAD_INFO(r13)
-	ld	r3,_MSR(r1)
-#ifdef CONFIG_PPC_BOOK3E
-	ld	r10,PACACURRENT(r13)
-#endif /* CONFIG_PPC_BOOK3E */
-	ld	r4,TI_FLAGS(r9)
-	andi.	r3,r3,MSR_PR
-	beq	resume_kernel
-#ifdef CONFIG_PPC_BOOK3E
-	lwz	r3,(THREAD+THREAD_DBCR0)(r10)
-#endif /* CONFIG_PPC_BOOK3E */
-
-	/* Check current_thread_info()->flags */
-	andi.	r0,r4,_TIF_USER_WORK_MASK
-	bne	1f
-#ifdef CONFIG_PPC_BOOK3E
-	/*
-	 * Check to see if the dbcr0 register is set up to debug.
-	 * Use the internal debug mode bit to do this.
-	 */
-	andis.	r0,r3,DBCR0_IDM@h
-	beq	restore
-	mfmsr	r0
-	rlwinm	r0,r0,0,~MSR_DE	/* Clear MSR.DE */
-	mtmsr	r0
-	mtspr	SPRN_DBCR0,r3
-	li	r10, -1
-	mtspr	SPRN_DBSR,r10
-	b	restore
-#else
+	.balign IFETCH_ALIGN_BYTES
+	.globl fast_interrupt_return
+fast_interrupt_return:
+_ASM_NOKPROBE_SYMBOL(fast_interrupt_return)
+	ld	r4,_MSR(r1)
+	andi.	r0,r4,MSR_PR
+	bne	.Lfast_user_interrupt_return
+	andi.	r0,r4,MSR_RI
+	li	r3,0 /* 0 return value, no EMULATE_STACK_STORE */
+	bne+	.Lfast_kernel_interrupt_return
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	restore_math
-	b	restore
-#endif
-1:	andi.	r0,r4,_TIF_NEED_RESCHED
-	beq	2f
-	bl	restore_interrupts
-	SCHEDULE_USER
-	b	ret_from_except_lite
-2:
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-	andi.	r0,r4,_TIF_USER_WORK_MASK & ~_TIF_RESTORE_TM
-	bne	3f		/* only restore TM if nothing else to do */
+	bl	unrecoverable_exception
+	b	. /* should not get here */
+
+	.balign IFETCH_ALIGN_BYTES
+	.globl interrupt_return
+interrupt_return:
+_ASM_NOKPROBE_SYMBOL(interrupt_return)
+	ld	r4,_MSR(r1)
+	andi.	r0,r4,MSR_PR
+	beq	.Lkernel_interrupt_return
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	restore_tm_state
-	b	restore
-3:
-#endif
-	bl	save_nvgprs
-	/*
-	 * Use a non volatile GPR to save and restore our thread_info flags
-	 * across the call to restore_interrupts.
-	 */
-	mr	r30,r4
-	bl	restore_interrupts
-	mr	r4,r30
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	do_notify_resume
-	b	ret_from_except
+	bl	interrupt_exit_user_prepare
+	cmpdi	r3,0
+	bne-	.Lrestore_nvgprs
 
-resume_kernel:
-	/* check current_thread_info, _TIF_EMULATE_STACK_STORE */
-	andis.	r8,r4,_TIF_EMULATE_STACK_STORE@h
-	beq+	1f
+.Lfast_user_interrupt_return:
+	ld	r11,_NIP(r1)
+	ld	r12,_MSR(r1)
+BEGIN_FTR_SECTION
+	ld	r10,_PPR(r1)
+	mtspr	SPRN_PPR,r10
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
+	mtspr	SPRN_SRR0,r11
+	mtspr	SPRN_SRR1,r12
 
-	addi	r8,r1,INT_FRAME_SIZE	/* Get the kprobed function entry */
-
-	ld	r3,GPR1(r1)
-	subi	r3,r3,INT_FRAME_SIZE	/* dst: Allocate a trampoline exception frame */
-	mr	r4,r1			/* src:  current exception frame */
-	mr	r1,r3			/* Reroute the trampoline frame to r1 */
-
-	/* Copy from the original to the trampoline. */
-	li	r5,INT_FRAME_SIZE/8	/* size: INT_FRAME_SIZE */
-	li	r6,0			/* start offset: 0 */
-	mtctr	r5
-2:	ldx	r0,r6,r4
-	stdx	r0,r6,r3
-	addi	r6,r6,8
-	bdnz	2b
-
-	/* Do real store operation to complete stdu */
-	ld	r5,GPR1(r1)
-	std	r8,0(r5)
-
-	/* Clear _TIF_EMULATE_STACK_STORE flag */
-	lis	r11,_TIF_EMULATE_STACK_STORE@h
-	addi	r5,r9,TI_FLAGS
-0:	ldarx	r4,0,r5
-	andc	r4,r4,r11
-	stdcx.	r4,0,r5
-	bne-	0b
-1:
-
-#ifdef CONFIG_PREEMPTION
-	/* Check if we need to preempt */
-	andi.	r0,r4,_TIF_NEED_RESCHED
-	beq+	restore
-	/* Check that preempt_count() == 0 and interrupts are enabled */
-	lwz	r8,TI_PREEMPT(r9)
-	cmpwi	cr0,r8,0
-	bne	restore
-	ld	r0,SOFTE(r1)
-	andi.	r0,r0,IRQS_DISABLED
-	bne	restore
-
-	/*
-	 * Here we are preempting the current task. We want to make
-	 * sure we are soft-disabled first and reconcile irq state.
-	 */
-	RECONCILE_IRQ_STATE(r3,r4)
-	bl	preempt_schedule_irq
-
-	/*
-	 * arch_local_irq_restore() from preempt_schedule_irq above may
-	 * enable hard interrupt but we really should disable interrupts
-	 * when we return from the interrupt, and so that we don't get
-	 * interrupted after loading SRR0/1.
-	 */
-#ifdef CONFIG_PPC_BOOK3E
-	wrteei	0
-#else
-	li	r10,MSR_RI
-	mtmsrd	r10,1		  /* Update machine state */
-#endif /* CONFIG_PPC_BOOK3E */
-#endif /* CONFIG_PREEMPTION */
-
-	.globl	fast_exc_return_irq
-fast_exc_return_irq:
-restore:
-	/*
-	 * This is the main kernel exit path. First we check if we
-	 * are about to re-enable interrupts
-	 */
-	ld	r5,SOFTE(r1)
-	lbz	r6,PACAIRQSOFTMASK(r13)
-	andi.	r5,r5,IRQS_DISABLED
-	bne	.Lrestore_irq_off
-
-	/* We are enabling, were we already enabled ? Yes, just return */
-	andi.	r6,r6,IRQS_DISABLED
-	beq	cr0,.Ldo_restore
-
-	/*
-	 * We are about to soft-enable interrupts (we are hard disabled
-	 * at this point). We check if there's anything that needs to
-	 * be replayed first.
-	 */
-	lbz	r0,PACAIRQHAPPENED(r13)
-	cmpwi	cr0,r0,0
-	bne-	.Lrestore_check_irq_replay
-
-	/*
-	 * Get here when nothing happened while soft-disabled, just
-	 * soft-enable and move-on. We will hard-enable as a side
-	 * effect of rfi
-	 */
-.Lrestore_no_replay:
-	TRACE_ENABLE_INTS
-	li	r0,IRQS_ENABLED
-	stb	r0,PACAIRQSOFTMASK(r13);
-
-	/*
-	 * Final return path. BookE is handled in a different file
-	 */
-.Ldo_restore:
-#ifdef CONFIG_PPC_BOOK3E
-	b	exception_return_book3e
-#else
-	/*
-	 * Clear the reservation. If we know the CPU tracks the address of
-	 * the reservation then we can potentially save some cycles and use
-	 * a larx. On POWER6 and POWER7 this is significantly faster.
-	 */
 BEGIN_FTR_SECTION
 	stdcx.	r0,0,r1		/* to clear the reservation */
 FTR_SECTION_ELSE
-	ldarx	r4,0,r1
+	ldarx	r0,0,r1
 ALT_FTR_SECTION_END_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS)
 
-	/*
-	 * Some code path such as load_up_fpu or altivec return directly
-	 * here. They run entirely hard disabled and do not alter the
-	 * interrupt state. They also don't use lwarx/stwcx. and thus
-	 * are known not to leave dangling reservations.
-	 */
-	.globl	fast_exception_return
-fast_exception_return:
-	ld	r3,_MSR(r1)
-	ld	r4,_CTR(r1)
-	ld	r0,_LINK(r1)
-	mtctr	r4
-	mtlr	r0
-	ld	r4,_XER(r1)
-	mtspr	SPRN_XER,r4
+	ld	r3,_CCR(r1)
+	ld	r4,_LINK(r1)
+	ld	r5,_CTR(r1)
+	ld	r6,_XER(r1)
+	li	r0,0
 
-	kuap_check_amr r5, r6
-
-	REST_8GPRS(5, r1)
-
-	andi.	r0,r3,MSR_RI
-	beq-	.Lunrecov_restore
-
-	/*
-	 * Clear RI before restoring r13.  If we are returning to
-	 * userspace and we take an exception after restoring r13,
-	 * we end up corrupting the userspace r13 value.
-	 */
-	li	r4,0
-	mtmsrd	r4,1
-
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-	/* TM debug */
-	std	r3, PACATMSCRATCH(r13) /* Stash returned-to MSR */
-#endif
-	/*
-	 * r13 is our per cpu area, only restore it if we are returning to
-	 * userspace the value stored in the stack frame may belong to
-	 * another CPU.
-	 */
-	andi.	r0,r3,MSR_PR
-	beq	1f
-BEGIN_FTR_SECTION
-	/* Restore PPR */
-	ld	r2,_PPR(r1)
-	mtspr	SPRN_PPR,r2
-END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
-	ACCOUNT_CPU_USER_EXIT(r13, r2, r4)
+	REST_4GPRS(7, r1)
+	REST_2GPRS(11, r1)
 	REST_GPR(13, r1)
 
-	/*
-	 * We don't need to restore AMR on the way back to userspace for KUAP.
-	 * The value of AMR only matters while we're in the kernel.
-	 */
-	mtspr	SPRN_SRR1,r3
+	mtcr	r3
+	mtlr	r4
+	mtctr	r5
+	mtspr	SPRN_XER,r6
 
-	ld	r2,_CCR(r1)
-	mtcrf	0xFF,r2
-	ld	r2,_NIP(r1)
-	mtspr	SPRN_SRR0,r2
-
-	ld	r0,GPR0(r1)
-	ld	r2,GPR2(r1)
-	ld	r3,GPR3(r1)
-	ld	r4,GPR4(r1)
-	ld	r1,GPR1(r1)
+	REST_4GPRS(2, r1)
+	REST_GPR(6, r1)
+	REST_GPR(0, r1)
+	REST_GPR(1, r1)
 	RFI_TO_USER
 	b	.	/* prevent speculative execution */
 
-1:	mtspr	SPRN_SRR1,r3
+.Lrestore_nvgprs:
+	REST_NVGPRS(r1)
+	b	.Lfast_user_interrupt_return
 
-	ld	r2,_CCR(r1)
-	mtcrf	0xFF,r2
-	ld	r2,_NIP(r1)
-	mtspr	SPRN_SRR0,r2
+	.balign IFETCH_ALIGN_BYTES
+.Lkernel_interrupt_return:
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	interrupt_exit_kernel_prepare
+
+.Lfast_kernel_interrupt_return:
+	cmpdi	cr1,r3,0
+	ld	r11,_NIP(r1)
+	ld	r12,_MSR(r1)
+	mtspr	SPRN_SRR0,r11
+	mtspr	SPRN_SRR1,r12
+
+BEGIN_FTR_SECTION
+	stdcx.	r0,0,r1		/* to clear the reservation */
+FTR_SECTION_ELSE
+	ldarx	r0,0,r1
+ALT_FTR_SECTION_END_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS)
+
+	ld	r3,_LINK(r1)
+	ld	r4,_CTR(r1)
+	ld	r5,_XER(r1)
+	ld	r6,_CCR(r1)
+	li	r0,0
+
+	REST_4GPRS(7, r1)
+	REST_2GPRS(11, r1)
+
+	mtlr	r3
+	mtctr	r4
+	mtspr	SPRN_XER,r5
 
 	/*
 	 * Leaving a stale exception_marker on the stack can confuse
 	 * the reliable stack unwinder later on. Clear it.
 	 */
-	li	r2,0
-	std	r2,STACK_FRAME_OVERHEAD-16(r1)
+	std	r0,STACK_FRAME_OVERHEAD-16(r1)
 
-	ld	r0,GPR0(r1)
-	ld	r2,GPR2(r1)
-	ld	r3,GPR3(r1)
+	REST_4GPRS(2, r1)
 
-	kuap_restore_amr r4
-
-	ld	r4,GPR4(r1)
-	ld	r1,GPR1(r1)
+	bne-	cr1,1f /* emulate stack store */
+	mtcr	r6
+	REST_GPR(6, r1)
+	REST_GPR(0, r1)
+	REST_GPR(1, r1)
 	RFI_TO_KERNEL
 	b	.	/* prevent speculative execution */
 
-#endif /* CONFIG_PPC_BOOK3E */
-
-	/*
-	 * We are returning to a context with interrupts soft disabled.
-	 *
-	 * However, we may also about to hard enable, so we need to
-	 * make sure that in this case, we also clear PACA_IRQ_HARD_DIS
-	 * or that bit can get out of sync and bad things will happen
+1:	/*
+	 * Emulate stack store with update. New r1 value was already calculated
+	 * and updated in our interrupt regs by emulate_loadstore, but we can't
+	 * store the previous value of r1 to the stack before re-loading our
+	 * registers from it, otherwise they could be clobbered.  Use
+	 * PACA_EXGEN as temporary storage to hold the store data, as
+	 * interrupts are disabled here so it won't be clobbered.
 	 */
-.Lrestore_irq_off:
-	ld	r3,_MSR(r1)
-	lbz	r7,PACAIRQHAPPENED(r13)
-	andi.	r0,r3,MSR_EE
-	beq	1f
-	rlwinm	r7,r7,0,~PACA_IRQ_HARD_DIS
-	stb	r7,PACAIRQHAPPENED(r13)
-1:
-#if defined(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG) && defined(CONFIG_BUG)
-	/* The interrupt should not have soft enabled. */
-	lbz	r7,PACAIRQSOFTMASK(r13)
-1:	tdeqi	r7,IRQS_ENABLED
-	EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,BUGFLAG_WARNING
-#endif
-	b	.Ldo_restore
+	mtcr	r6
+	std	r9,PACA_EXGEN+0(r13)
+	addi	r9,r1,INT_FRAME_SIZE /* get original r1 */
+	REST_GPR(6, r1)
+	REST_GPR(0, r1)
+	REST_GPR(1, r1)
+	std	r9,0(r1) /* perform store component of stdu */
+	ld	r9,PACA_EXGEN+0(r13)
 
-	/*
-	 * Something did happen, check if a re-emit is needed
-	 * (this also clears paca->irq_happened)
-	 */
-.Lrestore_check_irq_replay:
-	/* XXX: We could implement a fast path here where we check
-	 * for irq_happened being just 0x01, in which case we can
-	 * clear it and return. That means that we would potentially
-	 * miss a decrementer having wrapped all the way around.
-	 *
-	 * Still, this might be useful for things like hash_page
-	 */
-	bl	__check_irq_replay
-	cmpwi	cr0,r3,0
-	beq	.Lrestore_no_replay
- 
-	/*
-	 * We need to re-emit an interrupt. We do so by re-using our
-	 * existing exception frame. We first change the trap value,
-	 * but we need to ensure we preserve the low nibble of it
-	 */
-	ld	r4,_TRAP(r1)
-	clrldi	r4,r4,60
-	or	r4,r4,r3
-	std	r4,_TRAP(r1)
-
-	/*
-	 * PACA_IRQ_HARD_DIS won't always be set here, so set it now
-	 * to reconcile the IRQ state. Tracing is already accounted for.
-	 */
-	lbz	r4,PACAIRQHAPPENED(r13)
-	ori	r4,r4,PACA_IRQ_HARD_DIS
-	stb	r4,PACAIRQHAPPENED(r13)
-
-	/*
-	 * Then find the right handler and call it. Interrupts are
-	 * still soft-disabled and we keep them that way.
-	*/
-	cmpwi	cr0,r3,0x500
-	bne	1f
-	addi	r3,r1,STACK_FRAME_OVERHEAD;
- 	bl	do_IRQ
-	b	ret_from_except
-1:	cmpwi	cr0,r3,0xf00
-	bne	1f
-	addi	r3,r1,STACK_FRAME_OVERHEAD;
-	bl	performance_monitor_exception
-	b	ret_from_except
-1:	cmpwi	cr0,r3,0xe60
-	bne	1f
-	addi	r3,r1,STACK_FRAME_OVERHEAD;
-	bl	handle_hmi_exception
-	b	ret_from_except
-1:	cmpwi	cr0,r3,0x900
-	bne	1f
-	addi	r3,r1,STACK_FRAME_OVERHEAD;
-	bl	timer_interrupt
-	b	ret_from_except
-#ifdef CONFIG_PPC_DOORBELL
-1:
-#ifdef CONFIG_PPC_BOOK3E
-	cmpwi	cr0,r3,0x280
-#else
-	cmpwi	cr0,r3,0xa00
-#endif /* CONFIG_PPC_BOOK3E */
-	bne	1f
-	addi	r3,r1,STACK_FRAME_OVERHEAD;
-	bl	doorbell_exception
-#endif /* CONFIG_PPC_DOORBELL */
-1:	b	ret_from_except /* What else to do here ? */
- 
-.Lunrecov_restore:
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	unrecoverable_exception
-	b	.Lunrecov_restore
-
-_ASM_NOKPROBE_SYMBOL(ret_from_except);
-_ASM_NOKPROBE_SYMBOL(ret_from_except_lite);
-_ASM_NOKPROBE_SYMBOL(resume_kernel);
-_ASM_NOKPROBE_SYMBOL(fast_exc_return_irq);
-_ASM_NOKPROBE_SYMBOL(restore);
-_ASM_NOKPROBE_SYMBOL(fast_exception_return);
-
+	RFI_TO_KERNEL
+	b	.	/* prevent speculative execution */
+#endif /* CONFIG_PPC_BOOK3S */
 
 #ifdef CONFIG_PPC_RTAS
 /*
diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
index e4076e3..d9ed794 100644
--- a/arch/powerpc/kernel/exceptions-64e.S
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -24,6 +24,7 @@
 #include <asm/kvm_asm.h>
 #include <asm/kvm_booke_hv_asm.h>
 #include <asm/feature-fixups.h>
+#include <asm/context_tracking.h>
 
 /* XXX This will ultimately add space for a special exception save
  *     structure used to save things like SRR0/SRR1, SPRGs, MAS, etc...
@@ -1003,38 +1004,6 @@
 	masked_interrupt_book3e PACA_IRQ_DBELL 0
 
 /*
- * Called from arch_local_irq_enable when an interrupt needs
- * to be resent. r3 contains either 0x500,0x900,0x260 or 0x280
- * to indicate the kind of interrupt. MSR:EE is already off.
- * We generate a stackframe like if a real interrupt had happened.
- *
- * Note: While MSR:EE is off, we need to make sure that _MSR
- * in the generated frame has EE set to 1 or the exception
- * handler will not properly re-enable them.
- */
-_GLOBAL(__replay_interrupt)
-	/* We are going to jump to the exception common code which
-	 * will retrieve various register values from the PACA which
-	 * we don't give a damn about.
-	 */
-	mflr	r10
-	mfmsr	r11
-	mfcr	r4
-	mtspr	SPRN_SPRG_GEN_SCRATCH,r13;
-	std	r1,PACA_EXGEN+EX_R1(r13);
-	stw	r4,PACA_EXGEN+EX_CR(r13);
-	ori	r11,r11,MSR_EE
-	subi	r1,r1,INT_FRAME_SIZE;
-	cmpwi	cr0,r3,0x500
-	beq	exc_0x500_common
-	cmpwi	cr0,r3,0x900
-	beq	exc_0x900_common
-	cmpwi	cr0,r3,0x280
-	beq	exc_0x280_common
-	blr
-
-
-/*
  * This is called from 0x300 and 0x400 handlers after the prologs with
  * r14 and r15 containing the fault address and error code, with the
  * original values stashed away in the PACA
@@ -1073,17 +1042,161 @@
 	bl	alignment_exception
 	b	ret_from_except
 
-/*
- * We branch here from entry_64.S for the last stage of the exception
- * return code path. MSR:EE is expected to be off at that point
- */
-_GLOBAL(exception_return_book3e)
-	b	1f
+	.align	7
+_GLOBAL(ret_from_except)
+	ld	r11,_TRAP(r1)
+	andi.	r0,r11,1
+	bne	ret_from_except_lite
+	REST_NVGPRS(r1)
+
+_GLOBAL(ret_from_except_lite)
+	/*
+	 * Disable interrupts so that current_thread_info()->flags
+	 * can't change between when we test it and when we return
+	 * from the interrupt.
+	 */
+	wrteei	0
+
+	ld	r9, PACA_THREAD_INFO(r13)
+	ld	r3,_MSR(r1)
+	ld	r10,PACACURRENT(r13)
+	ld	r4,TI_FLAGS(r9)
+	andi.	r3,r3,MSR_PR
+	beq	resume_kernel
+	lwz	r3,(THREAD+THREAD_DBCR0)(r10)
+
+	/* Check current_thread_info()->flags */
+	andi.	r0,r4,_TIF_USER_WORK_MASK
+	bne	1f
+	/*
+	 * Check to see if the dbcr0 register is set up to debug.
+	 * Use the internal debug mode bit to do this.
+	 */
+	andis.	r0,r3,DBCR0_IDM@h
+	beq	restore
+	mfmsr	r0
+	rlwinm	r0,r0,0,~MSR_DE	/* Clear MSR.DE */
+	mtmsr	r0
+	mtspr	SPRN_DBCR0,r3
+	li	r10, -1
+	mtspr	SPRN_DBSR,r10
+	b	restore
+1:	andi.	r0,r4,_TIF_NEED_RESCHED
+	beq	2f
+	bl	restore_interrupts
+	SCHEDULE_USER
+	b	ret_from_except_lite
+2:
+	bl	save_nvgprs
+	/*
+	 * Use a non volatile GPR to save and restore our thread_info flags
+	 * across the call to restore_interrupts.
+	 */
+	mr	r30,r4
+	bl	restore_interrupts
+	mr	r4,r30
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	do_notify_resume
+	b	ret_from_except
+
+resume_kernel:
+	/* check current_thread_info, _TIF_EMULATE_STACK_STORE */
+	andis.	r8,r4,_TIF_EMULATE_STACK_STORE@h
+	beq+	1f
+
+	addi	r8,r1,INT_FRAME_SIZE	/* Get the kprobed function entry */
+
+	ld	r3,GPR1(r1)
+	subi	r3,r3,INT_FRAME_SIZE	/* dst: Allocate a trampoline exception frame */
+	mr	r4,r1			/* src:  current exception frame */
+	mr	r1,r3			/* Reroute the trampoline frame to r1 */
+
+	/* Copy from the original to the trampoline. */
+	li	r5,INT_FRAME_SIZE/8	/* size: INT_FRAME_SIZE */
+	li	r6,0			/* start offset: 0 */
+	mtctr	r5
+2:	ldx	r0,r6,r4
+	stdx	r0,r6,r3
+	addi	r6,r6,8
+	bdnz	2b
+
+	/* Do real store operation to complete stdu */
+	ld	r5,GPR1(r1)
+	std	r8,0(r5)
+
+	/* Clear _TIF_EMULATE_STACK_STORE flag */
+	lis	r11,_TIF_EMULATE_STACK_STORE@h
+	addi	r5,r9,TI_FLAGS
+0:	ldarx	r4,0,r5
+	andc	r4,r4,r11
+	stdcx.	r4,0,r5
+	bne-	0b
+1:
+
+#ifdef CONFIG_PREEMPT
+	/* Check if we need to preempt */
+	andi.	r0,r4,_TIF_NEED_RESCHED
+	beq+	restore
+	/* Check that preempt_count() == 0 and interrupts are enabled */
+	lwz	r8,TI_PREEMPT(r9)
+	cmpwi	cr0,r8,0
+	bne	restore
+	ld	r0,SOFTE(r1)
+	andi.	r0,r0,IRQS_DISABLED
+	bne	restore
+
+	/*
+	 * Here we are preempting the current task. We want to make
+	 * sure we are soft-disabled first and reconcile irq state.
+	 */
+	RECONCILE_IRQ_STATE(r3,r4)
+	bl	preempt_schedule_irq
+
+	/*
+	 * arch_local_irq_restore() from preempt_schedule_irq above may
+	 * enable hard interrupt but we really should disable interrupts
+	 * when we return from the interrupt, and so that we don't get
+	 * interrupted after loading SRR0/1.
+	 */
+	wrteei	0
+#endif /* CONFIG_PREEMPT */
+
+restore:
+	/*
+	 * This is the main kernel exit path. First we check if we
+	 * are about to re-enable interrupts
+	 */
+	ld	r5,SOFTE(r1)
+	lbz	r6,PACAIRQSOFTMASK(r13)
+	andi.	r5,r5,IRQS_DISABLED
+	bne	.Lrestore_irq_off
+
+	/* We are enabling, were we already enabled ? Yes, just return */
+	andi.	r6,r6,IRQS_DISABLED
+	beq	cr0,fast_exception_return
+
+	/*
+	 * We are about to soft-enable interrupts (we are hard disabled
+	 * at this point). We check if there's anything that needs to
+	 * be replayed first.
+	 */
+	lbz	r0,PACAIRQHAPPENED(r13)
+	cmpwi	cr0,r0,0
+	bne-	.Lrestore_check_irq_replay
+
+	/*
+	 * Get here when nothing happened while soft-disabled, just
+	 * soft-enable and move-on. We will hard-enable as a side
+	 * effect of rfi
+	 */
+.Lrestore_no_replay:
+	TRACE_ENABLE_INTS
+	li	r0,IRQS_ENABLED
+	stb	r0,PACAIRQSOFTMASK(r13);
 
 /* This is the return from load_up_fpu fast path which could do with
  * less GPR restores in fact, but for now we have a single return path
  */
-	.globl fast_exception_return
 fast_exception_return:
 	wrteei	0
 1:	mr	r0,r13
@@ -1124,6 +1237,102 @@
 	mfspr	r13,SPRN_SPRG_GEN_SCRATCH
 	rfi
 
+	/*
+	 * We are returning to a context with interrupts soft disabled.
+	 *
+	 * However, we may also about to hard enable, so we need to
+	 * make sure that in this case, we also clear PACA_IRQ_HARD_DIS
+	 * or that bit can get out of sync and bad things will happen
+	 */
+.Lrestore_irq_off:
+	ld	r3,_MSR(r1)
+	lbz	r7,PACAIRQHAPPENED(r13)
+	andi.	r0,r3,MSR_EE
+	beq	1f
+	rlwinm	r7,r7,0,~PACA_IRQ_HARD_DIS
+	stb	r7,PACAIRQHAPPENED(r13)
+1:
+#if defined(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG) && defined(CONFIG_BUG)
+	/* The interrupt should not have soft enabled. */
+	lbz	r7,PACAIRQSOFTMASK(r13)
+1:	tdeqi	r7,IRQS_ENABLED
+	EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,BUGFLAG_WARNING
+#endif
+	b	fast_exception_return
+
+	/*
+	 * Something did happen, check if a re-emit is needed
+	 * (this also clears paca->irq_happened)
+	 */
+.Lrestore_check_irq_replay:
+	/* XXX: We could implement a fast path here where we check
+	 * for irq_happened being just 0x01, in which case we can
+	 * clear it and return. That means that we would potentially
+	 * miss a decrementer having wrapped all the way around.
+	 *
+	 * Still, this might be useful for things like hash_page
+	 */
+	bl	__check_irq_replay
+	cmpwi	cr0,r3,0
+	beq	.Lrestore_no_replay
+
+	/*
+	 * We need to re-emit an interrupt. We do so by re-using our
+	 * existing exception frame. We first change the trap value,
+	 * but we need to ensure we preserve the low nibble of it
+	 */
+	ld	r4,_TRAP(r1)
+	clrldi	r4,r4,60
+	or	r4,r4,r3
+	std	r4,_TRAP(r1)
+
+	/*
+	 * PACA_IRQ_HARD_DIS won't always be set here, so set it now
+	 * to reconcile the IRQ state. Tracing is already accounted for.
+	 */
+	lbz	r4,PACAIRQHAPPENED(r13)
+	ori	r4,r4,PACA_IRQ_HARD_DIS
+	stb	r4,PACAIRQHAPPENED(r13)
+
+	/*
+	 * Then find the right handler and call it. Interrupts are
+	 * still soft-disabled and we keep them that way.
+	*/
+	cmpwi	cr0,r3,0x500
+	bne	1f
+	addi	r3,r1,STACK_FRAME_OVERHEAD;
+	bl	do_IRQ
+	b	ret_from_except
+1:	cmpwi	cr0,r3,0xf00
+	bne	1f
+	addi	r3,r1,STACK_FRAME_OVERHEAD;
+	bl	performance_monitor_exception
+	b	ret_from_except
+1:	cmpwi	cr0,r3,0xe60
+	bne	1f
+	addi	r3,r1,STACK_FRAME_OVERHEAD;
+	bl	handle_hmi_exception
+	b	ret_from_except
+1:	cmpwi	cr0,r3,0x900
+	bne	1f
+	addi	r3,r1,STACK_FRAME_OVERHEAD;
+	bl	timer_interrupt
+	b	ret_from_except
+#ifdef CONFIG_PPC_DOORBELL
+1:
+	cmpwi	cr0,r3,0x280
+	bne	1f
+	addi	r3,r1,STACK_FRAME_OVERHEAD;
+	bl	doorbell_exception
+#endif /* CONFIG_PPC_DOORBELL */
+1:	b	ret_from_except /* What else to do here ? */
+
+_ASM_NOKPROBE_SYMBOL(ret_from_except);
+_ASM_NOKPROBE_SYMBOL(ret_from_except_lite);
+_ASM_NOKPROBE_SYMBOL(resume_kernel);
+_ASM_NOKPROBE_SYMBOL(restore);
+_ASM_NOKPROBE_SYMBOL(fast_exception_return);
+
 /*
  * Trampolines used when spotting a bad kernel stack pointer in
  * the exception entry code.
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index ffc15f4..728ccb0 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -32,16 +32,10 @@
 #define EX_CCR		52
 #define EX_CFAR		56
 #define EX_PPR		64
-#if defined(CONFIG_RELOCATABLE)
 #define EX_CTR		72
 .if EX_SIZE != 10
 	.error "EX_SIZE is wrong"
 .endif
-#else
-.if EX_SIZE != 9
-	.error "EX_SIZE is wrong"
-.endif
-#endif
 
 /*
  * Following are fixed section helper macros.
@@ -50,7 +44,6 @@
  * EXC_VIRT_BEGIN/END  - virt (AIL), unrelocated exception vectors
  * TRAMP_REAL_BEGIN    - real, unrelocated helpers (virt may call these)
  * TRAMP_VIRT_BEGIN    - virt, unreloc helpers (in practice, real can use)
- * TRAMP_KVM_BEGIN     - KVM handlers, these are put into real, unrelocated
  * EXC_COMMON          - After switching to virtual, relocated mode.
  */
 
@@ -80,13 +73,6 @@
 #define TRAMP_VIRT_BEGIN(name)					\
 	FIXED_SECTION_ENTRY_BEGIN(virt_trampolines, name)
 
-#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
-#define TRAMP_KVM_BEGIN(name)					\
-	TRAMP_VIRT_BEGIN(name)
-#else
-#define TRAMP_KVM_BEGIN(name)
-#endif
-
 #define EXC_REAL_NONE(start, size)				\
 	FIXED_SECTION_ENTRY_BEGIN_LOCATION(real_vectors, exc_real_##start##_##unused, start, size); \
 	FIXED_SECTION_ENTRY_END_LOCATION(real_vectors, exc_real_##start##_##unused, start, size)
@@ -119,67 +105,6 @@
 	ori	reg,reg,(ABS_ADDR(label))@l;				\
 	addis	reg,reg,(ABS_ADDR(label))@h
 
-/* Exception register prefixes */
-#define EXC_HV_OR_STD	2 /* depends on HVMODE */
-#define EXC_HV		1
-#define EXC_STD		0
-
-#if defined(CONFIG_RELOCATABLE)
-/*
- * If we support interrupts with relocation on AND we're a relocatable kernel,
- * we need to use CTR to get to the 2nd level handler.  So, save/restore it
- * when required.
- */
-#define SAVE_CTR(reg, area)	mfctr	reg ; 	std	reg,area+EX_CTR(r13)
-#define GET_CTR(reg, area) 			ld	reg,area+EX_CTR(r13)
-#define RESTORE_CTR(reg, area)	ld	reg,area+EX_CTR(r13) ; mtctr reg
-#else
-/* ...else CTR is unused and in register. */
-#define SAVE_CTR(reg, area)
-#define GET_CTR(reg, area) 	mfctr	reg
-#define RESTORE_CTR(reg, area)
-#endif
-
-/*
- * PPR save/restore macros used in exceptions-64s.S
- * Used for P7 or later processors
- */
-#define SAVE_PPR(area, ra)						\
-BEGIN_FTR_SECTION_NESTED(940)						\
-	ld	ra,area+EX_PPR(r13);	/* Read PPR from paca */	\
-	std	ra,_PPR(r1);						\
-END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,940)
-
-#define RESTORE_PPR_PACA(area, ra)					\
-BEGIN_FTR_SECTION_NESTED(941)						\
-	ld	ra,area+EX_PPR(r13);					\
-	mtspr	SPRN_PPR,ra;						\
-END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,941)
-
-/*
- * Get an SPR into a register if the CPU has the given feature
- */
-#define OPT_GET_SPR(ra, spr, ftr)					\
-BEGIN_FTR_SECTION_NESTED(943)						\
-	mfspr	ra,spr;							\
-END_FTR_SECTION_NESTED(ftr,ftr,943)
-
-/*
- * Set an SPR from a register if the CPU has the given feature
- */
-#define OPT_SET_SPR(ra, spr, ftr)					\
-BEGIN_FTR_SECTION_NESTED(943)						\
-	mtspr	spr,ra;							\
-END_FTR_SECTION_NESTED(ftr,ftr,943)
-
-/*
- * Save a register to the PACA if the CPU has the given feature
- */
-#define OPT_SAVE_REG_TO_PACA(offset, ra, ftr)				\
-BEGIN_FTR_SECTION_NESTED(943)						\
-	std	ra,offset(r13);						\
-END_FTR_SECTION_NESTED(ftr,ftr,943)
-
 /*
  * Branch to label using its 0xC000 address. This results in instruction
  * address suitable for MSR[IR]=0 or 1, which allows relocation to be turned
@@ -193,89 +118,199 @@
 	mtctr	reg;							\
 	bctr
 
-.macro INT_KVM_HANDLER name, vec, hsrr, area, skip
-	TRAMP_KVM_BEGIN(\name\()_kvm)
-	KVM_HANDLER \vec, \hsrr, \area, \skip
+/*
+ * Interrupt code generation macros
+ */
+#define IVEC		.L_IVEC_\name\()	/* Interrupt vector address */
+#define IHSRR		.L_IHSRR_\name\()	/* Sets SRR or HSRR registers */
+#define IHSRR_IF_HVMODE	.L_IHSRR_IF_HVMODE_\name\() /* HSRR if HV else SRR */
+#define IAREA		.L_IAREA_\name\()	/* PACA save area */
+#define IVIRT		.L_IVIRT_\name\()	/* Has virt mode entry point */
+#define IISIDE		.L_IISIDE_\name\()	/* Uses SRR0/1 not DAR/DSISR */
+#define IDAR		.L_IDAR_\name\()	/* Uses DAR (or SRR0) */
+#define IDSISR		.L_IDSISR_\name\()	/* Uses DSISR (or SRR1) */
+#define ISET_RI		.L_ISET_RI_\name\()	/* Run common code w/ MSR[RI]=1 */
+#define IBRANCH_TO_COMMON	.L_IBRANCH_TO_COMMON_\name\() /* ENTRY branch to common */
+#define IREALMODE_COMMON	.L_IREALMODE_COMMON_\name\() /* Common runs in realmode */
+#define IMASK		.L_IMASK_\name\()	/* IRQ soft-mask bit */
+#define IKVM_SKIP	.L_IKVM_SKIP_\name\()	/* Generate KVM skip handler */
+#define IKVM_REAL	.L_IKVM_REAL_\name\()	/* Real entry tests KVM */
+#define __IKVM_REAL(name)	.L_IKVM_REAL_ ## name
+#define IKVM_VIRT	.L_IKVM_VIRT_\name\()	/* Virt entry tests KVM */
+#define ISTACK		.L_ISTACK_\name\()	/* Set regular kernel stack */
+#define __ISTACK(name)	.L_ISTACK_ ## name
+#define IRECONCILE	.L_IRECONCILE_\name\()	/* Do RECONCILE_IRQ_STATE */
+#define IKUAP		.L_IKUAP_\name\()	/* Do KUAP lock */
+
+#define INT_DEFINE_BEGIN(n)						\
+.macro int_define_ ## n name
+
+#define INT_DEFINE_END(n)						\
+.endm ;									\
+int_define_ ## n n ;							\
+do_define_int n
+
+.macro do_define_int name
+	.ifndef IVEC
+		.error "IVEC not defined"
+	.endif
+	.ifndef IHSRR
+		IHSRR=0
+	.endif
+	.ifndef IHSRR_IF_HVMODE
+		IHSRR_IF_HVMODE=0
+	.endif
+	.ifndef IAREA
+		IAREA=PACA_EXGEN
+	.endif
+	.ifndef IVIRT
+		IVIRT=1
+	.endif
+	.ifndef IISIDE
+		IISIDE=0
+	.endif
+	.ifndef IDAR
+		IDAR=0
+	.endif
+	.ifndef IDSISR
+		IDSISR=0
+	.endif
+	.ifndef ISET_RI
+		ISET_RI=1
+	.endif
+	.ifndef IBRANCH_TO_COMMON
+		IBRANCH_TO_COMMON=1
+	.endif
+	.ifndef IREALMODE_COMMON
+		IREALMODE_COMMON=0
+	.else
+		.if ! IBRANCH_TO_COMMON
+			.error "IREALMODE_COMMON=1 but IBRANCH_TO_COMMON=0"
+		.endif
+	.endif
+	.ifndef IMASK
+		IMASK=0
+	.endif
+	.ifndef IKVM_SKIP
+		IKVM_SKIP=0
+	.endif
+	.ifndef IKVM_REAL
+		IKVM_REAL=0
+	.endif
+	.ifndef IKVM_VIRT
+		IKVM_VIRT=0
+	.endif
+	.ifndef ISTACK
+		ISTACK=1
+	.endif
+	.ifndef IRECONCILE
+		IRECONCILE=1
+	.endif
+	.ifndef IKUAP
+		IKUAP=1
+	.endif
 .endm
 
 #ifdef CONFIG_KVM_BOOK3S_64_HANDLER
 #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
 /*
- * If hv is possible, interrupts come into to the hv version
- * of the kvmppc_interrupt code, which then jumps to the PR handler,
- * kvmppc_interrupt_pr, if the guest is a PR guest.
+ * All interrupts which set HSRR registers, as well as SRESET and MCE and
+ * syscall when invoked with "sc 1" switch to MSR[HV]=1 (HVMODE) to be taken,
+ * so they all generally need to test whether they were taken in guest context.
+ *
+ * Note: SRESET and MCE may also be sent to the guest by the hypervisor, and be
+ * taken with MSR[HV]=0.
+ *
+ * Interrupts which set SRR registers (with the above exceptions) do not
+ * elevate to MSR[HV]=1 mode, though most can be taken when running with
+ * MSR[HV]=1  (e.g., bare metal kernel and userspace). So these interrupts do
+ * not need to test whether a guest is running because they get delivered to
+ * the guest directly, including nested HV KVM guests.
+ *
+ * The exception is PR KVM, where the guest runs with MSR[PR]=1 and the host
+ * runs with MSR[HV]=0, so the host takes all interrupts on behalf of the
+ * guest. PR KVM runs with LPCR[AIL]=0 which causes interrupts to always be
+ * delivered to the real-mode entry point, therefore such interrupts only test
+ * KVM in their real mode handlers, and only when PR KVM is possible.
+ *
+ * Interrupts that are taken in MSR[HV]=0 and escalate to MSR[HV]=1 are always
+ * delivered in real-mode when the MMU is in hash mode because the MMU
+ * registers are not set appropriately to translate host addresses. In nested
+ * radix mode these can be delivered in virt-mode as the host translations are
+ * used implicitly (see: effective LPID, effective PID).
+ */
+
+/*
+ * If an interrupt is taken while a guest is running, it is immediately routed
+ * to KVM to handle. If both HV and PR KVM arepossible, KVM interrupts go first
+ * to kvmppc_interrupt_hv, which handles the PR guest case.
  */
 #define kvmppc_interrupt kvmppc_interrupt_hv
 #else
 #define kvmppc_interrupt kvmppc_interrupt_pr
 #endif
 
-.macro KVMTEST name, hsrr, n
+.macro KVMTEST name
 	lbz	r10,HSTATE_IN_GUEST(r13)
 	cmpwi	r10,0
 	bne	\name\()_kvm
 .endm
 
-.macro KVM_HANDLER vec, hsrr, area, skip
-	.if \skip
+.macro GEN_KVM name
+	.balign IFETCH_ALIGN_BYTES
+\name\()_kvm:
+
+	.if IKVM_SKIP
 	cmpwi	r10,KVM_GUEST_MODE_SKIP
 	beq	89f
 	.else
-BEGIN_FTR_SECTION_NESTED(947)
-	ld	r10,\area+EX_CFAR(r13)
+BEGIN_FTR_SECTION
+	ld	r10,IAREA+EX_CFAR(r13)
 	std	r10,HSTATE_CFAR(r13)
-END_FTR_SECTION_NESTED(CPU_FTR_CFAR,CPU_FTR_CFAR,947)
+END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
 	.endif
 
-BEGIN_FTR_SECTION_NESTED(948)
-	ld	r10,\area+EX_PPR(r13)
+	ld	r10,PACA_EXGEN+EX_CTR(r13)
+	mtctr	r10
+BEGIN_FTR_SECTION
+	ld	r10,IAREA+EX_PPR(r13)
 	std	r10,HSTATE_PPR(r13)
-END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948)
-	ld	r10,\area+EX_R10(r13)
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
+	ld	r11,IAREA+EX_R11(r13)
+	ld	r12,IAREA+EX_R12(r13)
 	std	r12,HSTATE_SCRATCH0(r13)
 	sldi	r12,r9,32
+	ld	r9,IAREA+EX_R9(r13)
+	ld	r10,IAREA+EX_R10(r13)
 	/* HSRR variants have the 0x2 bit added to their trap number */
-	.if \hsrr == EXC_HV_OR_STD
+	.if IHSRR_IF_HVMODE
 	BEGIN_FTR_SECTION
-	ori	r12,r12,(\vec + 0x2)
+	ori	r12,r12,(IVEC + 0x2)
 	FTR_SECTION_ELSE
-	ori	r12,r12,(\vec)
+	ori	r12,r12,(IVEC)
 	ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
-	.elseif \hsrr
-	ori	r12,r12,(\vec + 0x2)
+	.elseif IHSRR
+	ori	r12,r12,(IVEC+ 0x2)
 	.else
-	ori	r12,r12,(\vec)
+	ori	r12,r12,(IVEC)
 	.endif
-
-#ifdef CONFIG_RELOCATABLE
-	/*
-	 * KVM requires __LOAD_FAR_HANDLER beause kvmppc_interrupt lives
-	 * outside the head section. CONFIG_RELOCATABLE KVM expects CTR
-	 * to be saved in HSTATE_SCRATCH1.
-	 */
-	mfctr	r9
-	std	r9,HSTATE_SCRATCH1(r13)
-	__LOAD_FAR_HANDLER(r9, kvmppc_interrupt)
-	mtctr	r9
-	ld	r9,\area+EX_R9(r13)
-	bctr
-#else
-	ld	r9,\area+EX_R9(r13)
 	b	kvmppc_interrupt
-#endif
 
-
-	.if \skip
+	.if IKVM_SKIP
 89:	mtocrf	0x80,r9
-	ld	r9,\area+EX_R9(r13)
-	ld	r10,\area+EX_R10(r13)
-	.if \hsrr == EXC_HV_OR_STD
+	ld	r10,PACA_EXGEN+EX_CTR(r13)
+	mtctr	r10
+	ld	r9,IAREA+EX_R9(r13)
+	ld	r10,IAREA+EX_R10(r13)
+	ld	r11,IAREA+EX_R11(r13)
+	ld	r12,IAREA+EX_R12(r13)
+	.if IHSRR_IF_HVMODE
 	BEGIN_FTR_SECTION
 	b	kvmppc_skip_Hinterrupt
 	FTR_SECTION_ELSE
 	b	kvmppc_skip_interrupt
 	ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
-	.elseif \hsrr
+	.elseif IHSRR
 	b	kvmppc_skip_Hinterrupt
 	.else
 	b	kvmppc_skip_interrupt
@@ -284,107 +319,12 @@
 .endm
 
 #else
-.macro KVMTEST name, hsrr, n
+.macro KVMTEST name
 .endm
-.macro KVM_HANDLER name, vec, hsrr, area, skip
+.macro GEN_KVM name
 .endm
 #endif
 
-.macro INT_SAVE_SRR_AND_JUMP label, hsrr, set_ri
-	ld	r10,PACAKMSR(r13)	/* get MSR value for kernel */
-	.if ! \set_ri
-	xori	r10,r10,MSR_RI		/* Clear MSR_RI */
-	.endif
-	.if \hsrr == EXC_HV_OR_STD
-	BEGIN_FTR_SECTION
-	mfspr	r11,SPRN_HSRR0		/* save HSRR0 */
-	mfspr	r12,SPRN_HSRR1		/* and HSRR1 */
-	mtspr	SPRN_HSRR1,r10
-	FTR_SECTION_ELSE
-	mfspr	r11,SPRN_SRR0		/* save SRR0 */
-	mfspr	r12,SPRN_SRR1		/* and SRR1 */
-	mtspr	SPRN_SRR1,r10
-	ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
-	.elseif \hsrr
-	mfspr	r11,SPRN_HSRR0		/* save HSRR0 */
-	mfspr	r12,SPRN_HSRR1		/* and HSRR1 */
-	mtspr	SPRN_HSRR1,r10
-	.else
-	mfspr	r11,SPRN_SRR0		/* save SRR0 */
-	mfspr	r12,SPRN_SRR1		/* and SRR1 */
-	mtspr	SPRN_SRR1,r10
-	.endif
-	LOAD_HANDLER(r10, \label\())
-	.if \hsrr == EXC_HV_OR_STD
-	BEGIN_FTR_SECTION
-	mtspr	SPRN_HSRR0,r10
-	HRFI_TO_KERNEL
-	FTR_SECTION_ELSE
-	mtspr	SPRN_SRR0,r10
-	RFI_TO_KERNEL
-	ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
-	.elseif \hsrr
-	mtspr	SPRN_HSRR0,r10
-	HRFI_TO_KERNEL
-	.else
-	mtspr	SPRN_SRR0,r10
-	RFI_TO_KERNEL
-	.endif
-	b	.	/* prevent speculative execution */
-.endm
-
-/* INT_SAVE_SRR_AND_JUMP works for real or virt, this is faster but virt only */
-.macro INT_VIRT_SAVE_SRR_AND_JUMP label, hsrr
-#ifdef CONFIG_RELOCATABLE
-	.if \hsrr == EXC_HV_OR_STD
-	BEGIN_FTR_SECTION
-	mfspr	r11,SPRN_HSRR0	/* save HSRR0 */
-	FTR_SECTION_ELSE
-	mfspr	r11,SPRN_SRR0	/* save SRR0 */
-	ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
-	.elseif \hsrr
-	mfspr	r11,SPRN_HSRR0	/* save HSRR0 */
-	.else
-	mfspr	r11,SPRN_SRR0	/* save SRR0 */
-	.endif
-	LOAD_HANDLER(r12, \label\())
-	mtctr	r12
-	.if \hsrr == EXC_HV_OR_STD
-	BEGIN_FTR_SECTION
-	mfspr	r12,SPRN_HSRR1	/* and HSRR1 */
-	FTR_SECTION_ELSE
-	mfspr	r12,SPRN_SRR1	/* and HSRR1 */
-	ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
-	.elseif \hsrr
-	mfspr	r12,SPRN_HSRR1	/* and HSRR1 */
-	.else
-	mfspr	r12,SPRN_SRR1	/* and HSRR1 */
-	.endif
-	li	r10,MSR_RI
-	mtmsrd 	r10,1		/* Set RI (EE=0) */
-	bctr
-#else
-	.if \hsrr == EXC_HV_OR_STD
-	BEGIN_FTR_SECTION
-	mfspr	r11,SPRN_HSRR0		/* save HSRR0 */
-	mfspr	r12,SPRN_HSRR1		/* and HSRR1 */
-	FTR_SECTION_ELSE
-	mfspr	r11,SPRN_SRR0		/* save SRR0 */
-	mfspr	r12,SPRN_SRR1		/* and SRR1 */
-	ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
-	.elseif \hsrr
-	mfspr	r11,SPRN_HSRR0		/* save HSRR0 */
-	mfspr	r12,SPRN_HSRR1		/* and HSRR1 */
-	.else
-	mfspr	r11,SPRN_SRR0		/* save SRR0 */
-	mfspr	r12,SPRN_SRR1		/* and SRR1 */
-	.endif
-	li	r10,MSR_RI
-	mtmsrd 	r10,1			/* Set RI (EE=0) */
-	b	\label
-#endif
-.endm
-
 /*
  * This is the BOOK3S interrupt entry code macro.
  *
@@ -405,14 +345,41 @@
  * - Fall through and continue executing in real, unrelocated mode.
  *   This is done if early=2.
  */
-.macro INT_HANDLER name, vec, ool=0, early=0, virt=0, hsrr=0, area=PACA_EXGEN, ri=1, dar=0, dsisr=0, bitmask=0, kvm=0
+
+.macro GEN_BRANCH_TO_COMMON name, virt
+	.if IREALMODE_COMMON
+	LOAD_HANDLER(r10, \name\()_common)
+	mtctr	r10
+	bctr
+	.else
+	.if \virt
+#ifndef CONFIG_RELOCATABLE
+	b	\name\()_common_virt
+#else
+	LOAD_HANDLER(r10, \name\()_common_virt)
+	mtctr	r10
+	bctr
+#endif
+	.else
+	LOAD_HANDLER(r10, \name\()_common_real)
+	mtctr	r10
+	bctr
+	.endif
+	.endif
+.endm
+
+.macro GEN_INT_ENTRY name, virt, ool=0
 	SET_SCRATCH0(r13)			/* save r13 */
 	GET_PACA(r13)
-	std	r9,\area\()+EX_R9(r13)		/* save r9 */
-	OPT_GET_SPR(r9, SPRN_PPR, CPU_FTR_HAS_PPR)
+	std	r9,IAREA+EX_R9(r13)		/* save r9 */
+BEGIN_FTR_SECTION
+	mfspr	r9,SPRN_PPR
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
 	HMT_MEDIUM
-	std	r10,\area\()+EX_R10(r13)	/* save r10 - r12 */
-	OPT_GET_SPR(r10, SPRN_CFAR, CPU_FTR_CFAR)
+	std	r10,IAREA+EX_R10(r13)		/* save r10 - r12 */
+BEGIN_FTR_SECTION
+	mfspr	r10,SPRN_CFAR
+END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
 	.if \ool
 	.if !\virt
 	b	tramp_real_\name
@@ -425,47 +392,18 @@
 	.endif
 	.endif
 
-	OPT_SAVE_REG_TO_PACA(\area\()+EX_PPR, r9, CPU_FTR_HAS_PPR)
-	OPT_SAVE_REG_TO_PACA(\area\()+EX_CFAR, r10, CPU_FTR_CFAR)
+BEGIN_FTR_SECTION
+	std	r9,IAREA+EX_PPR(r13)
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
+BEGIN_FTR_SECTION
+	std	r10,IAREA+EX_CFAR(r13)
+END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
 	INTERRUPT_TO_KERNEL
-	SAVE_CTR(r10, \area\())
+	mfctr	r10
+	std	r10,IAREA+EX_CTR(r13)
 	mfcr	r9
-	.if \kvm
-		KVMTEST \name \hsrr \vec
-	.endif
-	.if \bitmask
-		lbz	r10,PACAIRQSOFTMASK(r13)
-		andi.	r10,r10,\bitmask
-		/* Associate vector numbers with bits in paca->irq_happened */
-		.if \vec == 0x500 || \vec == 0xea0
-		li	r10,PACA_IRQ_EE
-		.elseif \vec == 0x900
-		li	r10,PACA_IRQ_DEC
-		.elseif \vec == 0xa00 || \vec == 0xe80
-		li	r10,PACA_IRQ_DBELL
-		.elseif \vec == 0xe60
-		li	r10,PACA_IRQ_HMI
-		.elseif \vec == 0xf00
-		li	r10,PACA_IRQ_PMI
-		.else
-		.abort "Bad maskable vector"
-		.endif
-
-		.if \hsrr == EXC_HV_OR_STD
-		BEGIN_FTR_SECTION
-		bne	masked_Hinterrupt
-		FTR_SECTION_ELSE
-		bne	masked_interrupt
-		ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
-		.elseif \hsrr
-		bne	masked_Hinterrupt
-		.else
-		bne	masked_interrupt
-		.endif
-	.endif
-
-	std	r11,\area\()+EX_R11(r13)
-	std	r12,\area\()+EX_R12(r13)
+	std	r11,IAREA+EX_R11(r13)
+	std	r12,IAREA+EX_R12(r13)
 
 	/*
 	 * DAR/DSISR, SCRATCH0 must be read before setting MSR[RI],
@@ -473,49 +411,134 @@
 	 * not recoverable if they are live.
 	 */
 	GET_SCRATCH0(r10)
-	std	r10,\area\()+EX_R13(r13)
-	.if \dar
-	.if \hsrr
+	std	r10,IAREA+EX_R13(r13)
+	.if IDAR && !IISIDE
+	.if IHSRR
 	mfspr	r10,SPRN_HDAR
 	.else
 	mfspr	r10,SPRN_DAR
 	.endif
-	std	r10,\area\()+EX_DAR(r13)
+	std	r10,IAREA+EX_DAR(r13)
 	.endif
-	.if \dsisr
-	.if \hsrr
+	.if IDSISR && !IISIDE
+	.if IHSRR
 	mfspr	r10,SPRN_HDSISR
 	.else
 	mfspr	r10,SPRN_DSISR
 	.endif
-	stw	r10,\area\()+EX_DSISR(r13)
+	stw	r10,IAREA+EX_DSISR(r13)
 	.endif
 
-	.if \early == 2
-	/* nothing more */
-	.elseif \early
-	mfctr	r10			/* save ctr, even for !RELOCATABLE */
-	BRANCH_TO_C000(r11, \name\()_early_common)
-	.elseif !\virt
-	INT_SAVE_SRR_AND_JUMP \name\()_common, \hsrr, \ri
+	.if IHSRR_IF_HVMODE
+	BEGIN_FTR_SECTION
+	mfspr	r11,SPRN_HSRR0		/* save HSRR0 */
+	mfspr	r12,SPRN_HSRR1		/* and HSRR1 */
+	FTR_SECTION_ELSE
+	mfspr	r11,SPRN_SRR0		/* save SRR0 */
+	mfspr	r12,SPRN_SRR1		/* and SRR1 */
+	ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
+	.elseif IHSRR
+	mfspr	r11,SPRN_HSRR0		/* save HSRR0 */
+	mfspr	r12,SPRN_HSRR1		/* and HSRR1 */
 	.else
-	INT_VIRT_SAVE_SRR_AND_JUMP \name\()_common, \hsrr
+	mfspr	r11,SPRN_SRR0		/* save SRR0 */
+	mfspr	r12,SPRN_SRR1		/* and SRR1 */
 	.endif
+
+	.if IBRANCH_TO_COMMON
+	GEN_BRANCH_TO_COMMON \name \virt
+	.endif
+
 	.if \ool
 	.popsection
 	.endif
 .endm
 
 /*
- * On entry r13 points to the paca, r9-r13 are saved in the paca,
- * r9 contains the saved CR, r11 and r12 contain the saved SRR0 and
- * SRR1, and relocation is on.
+ * __GEN_COMMON_ENTRY is required to receive the branch from interrupt
+ * entry, except in the case of the real-mode handlers which require
+ * __GEN_REALMODE_COMMON_ENTRY.
  *
- * If stack=0, then the stack is already set in r1, and r1 is saved in r10.
- * PPR save and CPU accounting is not done for the !stack case (XXX why not?)
+ * This switches to virtual mode and sets MSR[RI].
  */
-.macro INT_COMMON vec, area, stack, kuap, reconcile, dar, dsisr
-	.if \stack
+.macro __GEN_COMMON_ENTRY name
+DEFINE_FIXED_SYMBOL(\name\()_common_real)
+\name\()_common_real:
+	.if IKVM_REAL
+		KVMTEST \name
+	.endif
+
+	ld	r10,PACAKMSR(r13)	/* get MSR value for kernel */
+	/* MSR[RI] is clear iff using SRR regs */
+	.if IHSRR == EXC_HV_OR_STD
+	BEGIN_FTR_SECTION
+	xori	r10,r10,MSR_RI
+	END_FTR_SECTION_IFCLR(CPU_FTR_HVMODE)
+	.elseif ! IHSRR
+	xori	r10,r10,MSR_RI
+	.endif
+	mtmsrd	r10
+
+	.if IVIRT
+	.if IKVM_VIRT
+	b	1f /* skip the virt test coming from real */
+	.endif
+
+	.balign IFETCH_ALIGN_BYTES
+DEFINE_FIXED_SYMBOL(\name\()_common_virt)
+\name\()_common_virt:
+	.if IKVM_VIRT
+		KVMTEST \name
+1:
+	.endif
+	.endif /* IVIRT */
+.endm
+
+/*
+ * Don't switch to virt mode. Used for early MCE and HMI handlers that
+ * want to run in real mode.
+ */
+.macro __GEN_REALMODE_COMMON_ENTRY name
+DEFINE_FIXED_SYMBOL(\name\()_common_real)
+\name\()_common_real:
+	.if IKVM_REAL
+		KVMTEST \name
+	.endif
+.endm
+
+.macro __GEN_COMMON_BODY name
+	.if IMASK
+		lbz	r10,PACAIRQSOFTMASK(r13)
+		andi.	r10,r10,IMASK
+		/* Associate vector numbers with bits in paca->irq_happened */
+		.if IVEC == 0x500 || IVEC == 0xea0
+		li	r10,PACA_IRQ_EE
+		.elseif IVEC == 0x900
+		li	r10,PACA_IRQ_DEC
+		.elseif IVEC == 0xa00 || IVEC == 0xe80
+		li	r10,PACA_IRQ_DBELL
+		.elseif IVEC == 0xe60
+		li	r10,PACA_IRQ_HMI
+		.elseif IVEC == 0xf00
+		li	r10,PACA_IRQ_PMI
+		.else
+		.abort "Bad maskable vector"
+		.endif
+
+		.if IHSRR_IF_HVMODE
+		BEGIN_FTR_SECTION
+		bne	masked_Hinterrupt
+		FTR_SECTION_ELSE
+		bne	masked_interrupt
+		ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
+		.elseif IHSRR
+		bne	masked_Hinterrupt
+		.else
+		bne	masked_interrupt
+		.endif
+	.endif
+
+	.if ISTACK
 	andi.	r10,r12,MSR_PR		/* See if coming from user	*/
 	mr	r10,r1			/* Save r1			*/
 	subi	r1,r1,INT_FRAME_SIZE	/* alloc frame on kernel stack	*/
@@ -532,54 +555,67 @@
 	std	r0,GPR0(r1)		/* save r0 in stackframe	*/
 	std	r10,GPR1(r1)		/* save r1 in stackframe	*/
 
-	.if \stack
-	.if \kuap
+	.if ISET_RI
+	li	r10,MSR_RI
+	mtmsrd	r10,1			/* Set MSR_RI */
+	.endif
+
+	.if ISTACK
+	.if IKUAP
 	kuap_save_amr_and_lock r9, r10, cr1, cr0
 	.endif
 	beq	101f			/* if from kernel mode		*/
 	ACCOUNT_CPU_USER_ENTRY(r13, r9, r10)
-	SAVE_PPR(\area, r9)
+BEGIN_FTR_SECTION
+	ld	r9,IAREA+EX_PPR(r13)	/* Read PPR from paca		*/
+	std	r9,_PPR(r1)
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
 101:
 	.else
-	.if \kuap
+	.if IKUAP
 	kuap_save_amr_and_lock r9, r10, cr1
 	.endif
 	.endif
 
 	/* Save original regs values from save area to stack frame. */
-	ld	r9,\area+EX_R9(r13)	/* move r9, r10 to stackframe	*/
-	ld	r10,\area+EX_R10(r13)
+	ld	r9,IAREA+EX_R9(r13)	/* move r9, r10 to stackframe	*/
+	ld	r10,IAREA+EX_R10(r13)
 	std	r9,GPR9(r1)
 	std	r10,GPR10(r1)
-	ld	r9,\area+EX_R11(r13)	/* move r11 - r13 to stackframe	*/
-	ld	r10,\area+EX_R12(r13)
-	ld	r11,\area+EX_R13(r13)
+	ld	r9,IAREA+EX_R11(r13)	/* move r11 - r13 to stackframe	*/
+	ld	r10,IAREA+EX_R12(r13)
+	ld	r11,IAREA+EX_R13(r13)
 	std	r9,GPR11(r1)
 	std	r10,GPR12(r1)
 	std	r11,GPR13(r1)
-	.if \dar
-	.if \dar == 2
+
+	SAVE_NVGPRS(r1)
+
+	.if IDAR
+	.if IISIDE
 	ld	r10,_NIP(r1)
 	.else
-	ld	r10,\area+EX_DAR(r13)
+	ld	r10,IAREA+EX_DAR(r13)
 	.endif
 	std	r10,_DAR(r1)
 	.endif
-	.if \dsisr
-	.if \dsisr == 2
+
+	.if IDSISR
+	.if IISIDE
 	ld	r10,_MSR(r1)
 	lis	r11,DSISR_SRR1_MATCH_64S@h
 	and	r10,r10,r11
 	.else
-	lwz	r10,\area+EX_DSISR(r13)
+	lwz	r10,IAREA+EX_DSISR(r13)
 	.endif
 	std	r10,_DSISR(r1)
 	.endif
-BEGIN_FTR_SECTION_NESTED(66)
-	ld	r10,\area+EX_CFAR(r13)
+
+BEGIN_FTR_SECTION
+	ld	r10,IAREA+EX_CFAR(r13)
 	std	r10,ORIG_GPR3(r1)
-END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 66)
-	GET_CTR(r10, \area)
+END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
+	ld	r10,IAREA+EX_CTR(r13)
 	std	r10,_CTR(r1)
 	std	r2,GPR2(r1)		/* save r2 in stackframe	*/
 	SAVE_4GPRS(3, r1)		/* save r3 - r6 in stackframe   */
@@ -591,32 +627,42 @@
 	mfspr	r11,SPRN_XER		/* save XER in stackframe	*/
 	std	r10,SOFTE(r1)
 	std	r11,_XER(r1)
-	li	r9,(\vec)+1
+	li	r9,IVEC
 	std	r9,_TRAP(r1)		/* set trap number		*/
 	li	r10,0
 	ld	r11,exception_marker@toc(r2)
 	std	r10,RESULT(r1)		/* clear regs->result		*/
 	std	r11,STACK_FRAME_OVERHEAD-16(r1) /* mark the frame	*/
 
-	.if \stack
+	.if ISTACK
 	ACCOUNT_STOLEN_TIME
 	.endif
 
-	.if \reconcile
+	.if IRECONCILE
 	RECONCILE_IRQ_STATE(r10, r11)
 	.endif
 .endm
 
 /*
+ * On entry r13 points to the paca, r9-r13 are saved in the paca,
+ * r9 contains the saved CR, r11 and r12 contain the saved SRR0 and
+ * SRR1, and relocation is on.
+ *
+ * If stack=0, then the stack is already set in r1, and r1 is saved in r10.
+ * PPR save and CPU accounting is not done for the !stack case (XXX why not?)
+ */
+.macro GEN_COMMON name
+	__GEN_COMMON_ENTRY \name
+	__GEN_COMMON_BODY \name
+.endm
+
+/*
  * Restore all registers including H/SRR0/1 saved in a stack frame of a
  * standard exception.
  */
-.macro EXCEPTION_RESTORE_REGS hsrr
+.macro EXCEPTION_RESTORE_REGS hsrr=0
 	/* Move original SRR0 and SRR1 into the respective regs */
 	ld	r9,_MSR(r1)
-	.if \hsrr == EXC_HV_OR_STD
-	.error "EXC_HV_OR_STD Not implemented for EXCEPTION_RESTORE_REGS"
-	.endif
 	.if \hsrr
 	mtspr	SPRN_HSRR1,r9
 	.else
@@ -670,28 +716,6 @@
 #define FINISH_NAP
 #endif
 
-#define EXC_COMMON(name, realvec, hdlr)					\
-	EXC_COMMON_BEGIN(name);						\
-	INT_COMMON realvec, PACA_EXGEN, 1, 1, 1, 0, 0 ;			\
-	bl	save_nvgprs;						\
-	addi	r3,r1,STACK_FRAME_OVERHEAD;				\
-	bl	hdlr;							\
-	b	ret_from_except
-
-/*
- * Like EXC_COMMON, but for exceptions that can occur in the idle task and
- * therefore need the special idle handling (finish nap and runlatch)
- */
-#define EXC_COMMON_ASYNC(name, realvec, hdlr)				\
-	EXC_COMMON_BEGIN(name);						\
-	INT_COMMON realvec, PACA_EXGEN, 1, 1, 1, 0, 0 ;			\
-	FINISH_NAP;							\
-	RUNLATCH_ON;							\
-	addi	r3,r1,STACK_FRAME_OVERHEAD;				\
-	bl	hdlr;							\
-	b	ret_from_except_lite
-
-
 /*
  * There are a few constraints to be concerned with.
  * - Real mode exceptions code/data must be located at their physical location.
@@ -778,6 +802,53 @@
 EXC_VIRT_NONE(0x4000, 0x100)
 
 
+/**
+ * Interrupt 0x100 - System Reset Interrupt (SRESET aka NMI).
+ * This is a non-maskable, asynchronous interrupt always taken in real-mode.
+ * It is caused by:
+ * - Wake from power-saving state, on powernv.
+ * - An NMI from another CPU, triggered by firmware or hypercall.
+ * - As crash/debug signal injected from BMC, firmware or hypervisor.
+ *
+ * Handling:
+ * Power-save wakeup is the only performance critical path, so this is
+ * determined quickly as possible first. In this case volatile registers
+ * can be discarded and SPRs like CFAR don't need to be read.
+ *
+ * If not a powersave wakeup, then it's run as a regular interrupt, however
+ * it uses its own stack and PACA save area to preserve the regular kernel
+ * environment for debugging.
+ *
+ * This interrupt is not maskable, so triggering it when MSR[RI] is clear,
+ * or SCRATCH0 is in use, etc. may cause a crash. It's also not entirely
+ * correct to switch to virtual mode to run the regular interrupt handler
+ * because it might be interrupted when the MMU is in a bad state (e.g., SLB
+ * is clear).
+ *
+ * FWNMI:
+ * PAPR specifies a "fwnmi" facility which sends the sreset to a different
+ * entry point with a different register set up. Some hypervisors will
+ * send the sreset to 0x100 in the guest if it is not fwnmi capable.
+ *
+ * KVM:
+ * Unlike most SRR interrupts, this may be taken by the host while executing
+ * in a guest, so a KVM test is required. KVM will pull the CPU out of guest
+ * mode and then raise the sreset.
+ */
+INT_DEFINE_BEGIN(system_reset)
+	IVEC=0x100
+	IAREA=PACA_EXNMI
+	IVIRT=0 /* no virt entry point */
+	/*
+	 * MSR_RI is not enabled, because PACA_EXNMI and nmi stack is
+	 * being used, so a nested NMI exception would corrupt it.
+	 */
+	ISET_RI=0
+	ISTACK=0
+	IRECONCILE=0
+	IKVM_REAL=1
+INT_DEFINE_END(system_reset)
+
 EXC_REAL_BEGIN(system_reset, 0x100, 0x100)
 #ifdef CONFIG_PPC_P7_NAP
 	/*
@@ -815,11 +886,8 @@
 END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
 #endif
 
-	INT_HANDLER system_reset, 0x100, area=PACA_EXNMI, ri=0, kvm=1
+	GEN_INT_ENTRY system_reset, virt=0
 	/*
-	 * MSR_RI is not enabled, because PACA_EXNMI and nmi stack is
-	 * being used, so a nested NMI exception would corrupt it.
-	 *
 	 * In theory, we should not enable relocation here if it was disabled
 	 * in SRR1, because the MMU may not be configured to support it (e.g.,
 	 * SLB may have been cleared). In practice, there should only be a few
@@ -828,7 +896,6 @@
 	 */
 EXC_REAL_END(system_reset, 0x100, 0x100)
 EXC_VIRT_NONE(0x4100, 0x100)
-INT_KVM_HANDLER system_reset 0x100, EXC_STD, PACA_EXNMI, 0
 
 #ifdef CONFIG_PPC_P7_NAP
 TRAMP_REAL_BEGIN(system_reset_idle_wake)
@@ -843,12 +910,14 @@
  * Vectors for the FWNMI option.  Share common code.
  */
 TRAMP_REAL_BEGIN(system_reset_fwnmi)
-	/* See comment at system_reset exception, don't turn on RI */
-	INT_HANDLER system_reset, 0x100, area=PACA_EXNMI, ri=0
+	/* XXX: fwnmi guest could run a nested/PR guest, so why no test?  */
+	__IKVM_REAL(system_reset)=0
+	GEN_INT_ENTRY system_reset, virt=0
 
 #endif /* CONFIG_PPC_PSERIES */
 
 EXC_COMMON_BEGIN(system_reset_common)
+	__GEN_COMMON_ENTRY system_reset
 	/*
 	 * Increment paca->in_nmi then enable MSR_RI. SLB or MCE will be able
 	 * to recover, but nested NMI will notice in_nmi and not recover
@@ -864,21 +933,21 @@
 	mr	r10,r1
 	ld	r1,PACA_NMI_EMERG_SP(r13)
 	subi	r1,r1,INT_FRAME_SIZE
-	INT_COMMON 0x100, PACA_EXNMI, 0, 1, 0, 0, 0
-	bl	save_nvgprs
+	__GEN_COMMON_BODY system_reset
 	/*
-	 * Set IRQS_ALL_DISABLED unconditionally so arch_irqs_disabled does
+	 * Set IRQS_ALL_DISABLED unconditionally so irqs_disabled() does
 	 * the right thing. We do not want to reconcile because that goes
 	 * through irq tracing which we don't want in NMI.
 	 *
-	 * Save PACAIRQHAPPENED because some code will do a hard disable
-	 * (e.g., xmon). So we want to restore this back to where it was
-	 * when we return. DAR is unused in the stack, so save it there.
+	 * Save PACAIRQHAPPENED to _DAR (otherwise unused), and set HARD_DIS
+	 * as we are running with MSR[EE]=0.
 	 */
 	li	r10,IRQS_ALL_DISABLED
 	stb	r10,PACAIRQSOFTMASK(r13)
 	lbz	r10,PACAIRQHAPPENED(r13)
 	std	r10,_DAR(r1)
+	ori	r10,r10,PACA_IRQ_HARD_DIS
+	stb	r10,PACAIRQHAPPENED(r13)
 
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	system_reset_exception
@@ -902,28 +971,95 @@
 	ld	r10,SOFTE(r1)
 	stb	r10,PACAIRQSOFTMASK(r13)
 
-	EXCEPTION_RESTORE_REGS EXC_STD
+	EXCEPTION_RESTORE_REGS
 	RFI_TO_USER_OR_KERNEL
 
+	GEN_KVM system_reset
 
-EXC_REAL_BEGIN(machine_check, 0x200, 0x100)
-	INT_HANDLER machine_check, 0x200, early=1, area=PACA_EXMC, dar=1, dsisr=1
+
+/**
+ * Interrupt 0x200 - Machine Check Interrupt (MCE).
+ * This is a non-maskable interrupt always taken in real-mode. It can be
+ * synchronous or asynchronous, caused by hardware or software, and it may be
+ * taken in a power-saving state.
+ *
+ * Handling:
+ * Similarly to system reset, this uses its own stack and PACA save area,
+ * the difference is re-entrancy is allowed on the machine check stack.
+ *
+ * machine_check_early is run in real mode, and carefully decodes the
+ * machine check and tries to handle it (e.g., flush the SLB if there was an
+ * error detected there), determines if it was recoverable and logs the
+ * event.
+ *
+ * This early code does not "reconcile" irq soft-mask state like SRESET or
+ * regular interrupts do, so irqs_disabled() among other things may not work
+ * properly (irq disable/enable already doesn't work because irq tracing can
+ * not work in real mode).
+ *
+ * Then, depending on the execution context when the interrupt is taken, there
+ * are 3 main actions:
+ * - Executing in kernel mode. The event is queued with irq_work, which means
+ *   it is handled when it is next safe to do so (i.e., the kernel has enabled
+ *   interrupts), which could be immediately when the interrupt returns. This
+ *   avoids nasty issues like switching to virtual mode when the MMU is in a
+ *   bad state, or when executing OPAL code. (SRESET is exposed to such issues,
+ *   but it has different priorities). Check to see if the CPU was in power
+ *   save, and return via the wake up code if it was.
+ *
+ * - Executing in user mode. machine_check_exception is run like a normal
+ *   interrupt handler, which processes the data generated by the early handler.
+ *
+ * - Executing in guest mode. The interrupt is run with its KVM test, and
+ *   branches to KVM to deal with. KVM may queue the event for the host
+ *   to report later.
+ *
+ * This interrupt is not maskable, so if it triggers when MSR[RI] is clear,
+ * or SCRATCH0 is in use, it may cause a crash.
+ *
+ * KVM:
+ * See SRESET.
+ */
+INT_DEFINE_BEGIN(machine_check_early)
+	IVEC=0x200
+	IAREA=PACA_EXMC
+	IVIRT=0 /* no virt entry point */
+	IREALMODE_COMMON=1
 	/*
 	 * MSR_RI is not enabled, because PACA_EXMC is being used, so a
 	 * nested machine check corrupts it. machine_check_common enables
 	 * MSR_RI.
 	 */
+	ISET_RI=0
+	ISTACK=0
+	IDAR=1
+	IDSISR=1
+	IRECONCILE=0
+	IKUAP=0 /* We don't touch AMR here, we never go to virtual mode */
+INT_DEFINE_END(machine_check_early)
+
+INT_DEFINE_BEGIN(machine_check)
+	IVEC=0x200
+	IAREA=PACA_EXMC
+	IVIRT=0 /* no virt entry point */
+	ISET_RI=0
+	IDAR=1
+	IDSISR=1
+	IKVM_SKIP=1
+	IKVM_REAL=1
+INT_DEFINE_END(machine_check)
+
+EXC_REAL_BEGIN(machine_check, 0x200, 0x100)
+	GEN_INT_ENTRY machine_check_early, virt=0
 EXC_REAL_END(machine_check, 0x200, 0x100)
 EXC_VIRT_NONE(0x4200, 0x100)
 
 #ifdef CONFIG_PPC_PSERIES
 TRAMP_REAL_BEGIN(machine_check_fwnmi)
 	/* See comment at machine_check exception, don't turn on RI */
-	INT_HANDLER machine_check, 0x200, early=1, area=PACA_EXMC, dar=1, dsisr=1
+	GEN_INT_ENTRY machine_check_early, virt=0
 #endif
 
-INT_KVM_HANDLER machine_check 0x200, EXC_STD, PACA_EXMC, 1
-
 #define MACHINE_CHECK_HANDLER_WINDUP			\
 	/* Clear MSR_RI before setting SRR0 and SRR1. */\
 	li	r9,0;					\
@@ -932,12 +1068,10 @@
 	lhz	r12,PACA_IN_MCE(r13);			\
 	subi	r12,r12,1;				\
 	sth	r12,PACA_IN_MCE(r13);			\
-	EXCEPTION_RESTORE_REGS EXC_STD
+	EXCEPTION_RESTORE_REGS
 
 EXC_COMMON_BEGIN(machine_check_early_common)
-	mtctr	r10			/* Restore ctr */
-	mfspr	r11,SPRN_SRR0
-	mfspr	r12,SPRN_SRR1
+	__GEN_REALMODE_COMMON_ENTRY machine_check_early
 
 	/*
 	 * Switch to mc_emergency stack and handle re-entrancy (we limit
@@ -974,8 +1108,7 @@
 	bgt	cr1,unrecoverable_mce	/* Check if we hit limit of 4 */
 	subi	r1,r1,INT_FRAME_SIZE	/* alloc stack frame */
 
-	/* We don't touch AMR here, we never go to virtual mode */
-	INT_COMMON 0x200, PACA_EXMC, 0, 0, 0, 1, 1
+	__GEN_COMMON_BODY machine_check_early
 
 BEGIN_FTR_SECTION
 	bl	enable_machine_check
@@ -983,7 +1116,6 @@
 	li	r10,MSR_RI
 	mtmsrd	r10,1
 
-	bl	save_nvgprs
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	machine_check_early
 	std	r3,RESULT(r1)	/* Save result */
@@ -1063,23 +1195,25 @@
 	mtspr	SPRN_CFAR,r10
 END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
 	MACHINE_CHECK_HANDLER_WINDUP
-	/* See comment at machine_check exception, don't turn on RI */
-	INT_HANDLER machine_check, 0x200, area=PACA_EXMC, ri=0, dar=1, dsisr=1, kvm=1
+	GEN_INT_ENTRY machine_check, virt=0
 
 EXC_COMMON_BEGIN(machine_check_common)
 	/*
 	 * Machine check is different because we use a different
 	 * save area: PACA_EXMC instead of PACA_EXGEN.
 	 */
-	INT_COMMON 0x200, PACA_EXMC, 1, 1, 1, 1, 1
+	GEN_COMMON machine_check
+
 	FINISH_NAP
 	/* Enable MSR_RI when finished with PACA_EXMC */
 	li	r10,MSR_RI
 	mtmsrd 	r10,1
-	bl	save_nvgprs
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	machine_check_exception
-	b	ret_from_except
+	b	interrupt_return
+
+	GEN_KVM machine_check
+
 
 #ifdef CONFIG_PPC_P7_NAP
 /*
@@ -1144,21 +1278,48 @@
 	b	.
 
 
+/**
+ * Interrupt 0x300 - Data Storage Interrupt (DSI).
+ * This is a synchronous interrupt generated due to a data access exception,
+ * e.g., a load orstore which does not have a valid page table entry with
+ * permissions. DAWR matches also fault here, as do RC updates, and minor misc
+ * errors e.g., copy/paste, AMO, certain invalid CI accesses, etc.
+ *
+ * Handling:
+ * - Hash MMU
+ *   Go to do_hash_page first to see if the HPT can be filled from an entry in
+ *   the Linux page table. Hash faults can hit in kernel mode in a fairly
+ *   arbitrary state (e.g., interrupts disabled, locks held) when accessing
+ *   "non-bolted" regions, e.g., vmalloc space. However these should always be
+ *   backed by Linux page tables.
+ *
+ *   If none is found, do a Linux page fault. Linux page faults can happen in
+ *   kernel mode due to user copy operations of course.
+ *
+ * - Radix MMU
+ *   The hardware loads from the Linux page table directly, so a fault goes
+ *   immediately to Linux page fault.
+ *
+ * Conditions like DAWR match are handled on the way in to Linux page fault.
+ */
+INT_DEFINE_BEGIN(data_access)
+	IVEC=0x300
+	IDAR=1
+	IDSISR=1
+#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
+	IKVM_SKIP=1
+	IKVM_REAL=1
+#endif
+INT_DEFINE_END(data_access)
+
 EXC_REAL_BEGIN(data_access, 0x300, 0x80)
-	INT_HANDLER data_access, 0x300, ool=1, dar=1, dsisr=1, kvm=1
+	GEN_INT_ENTRY data_access, virt=0
 EXC_REAL_END(data_access, 0x300, 0x80)
 EXC_VIRT_BEGIN(data_access, 0x4300, 0x80)
-	INT_HANDLER data_access, 0x300, virt=1, dar=1, dsisr=1
+	GEN_INT_ENTRY data_access, virt=1
 EXC_VIRT_END(data_access, 0x4300, 0x80)
-INT_KVM_HANDLER data_access, 0x300, EXC_STD, PACA_EXGEN, 1
 EXC_COMMON_BEGIN(data_access_common)
-	/*
-	 * Here r13 points to the paca, r9 contains the saved CR,
-	 * SRR0 and SRR1 are saved in r11 and r12,
-	 * r9 - r13 are saved in paca->exgen.
-	 * EX_DAR and EX_DSISR have saved DAR/DSISR
-	 */
-	INT_COMMON 0x300, PACA_EXGEN, 1, 1, 1, 1, 1
+	GEN_COMMON data_access
 	ld	r4,_DAR(r1)
 	ld	r5,_DSISR(r1)
 BEGIN_MMU_FTR_SECTION
@@ -1169,16 +1330,46 @@
 	b	handle_page_fault
 ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX)
 
+	GEN_KVM data_access
+
+
+/**
+ * Interrupt 0x380 - Data Segment Interrupt (DSLB).
+ * This is a synchronous interrupt in response to an MMU fault missing SLB
+ * entry for HPT, or an address outside RPT translation range.
+ *
+ * Handling:
+ * - HPT:
+ *   This refills the SLB, or reports an access fault similarly to a bad page
+ *   fault. When coming from user-mode, the SLB handler may access any kernel
+ *   data, though it may itself take a DSLB. When coming from kernel mode,
+ *   recursive faults must be avoided so access is restricted to the kernel
+ *   image text/data, kernel stack, and any data allocated below
+ *   ppc64_bolted_size (first segment). The kernel handler must avoid stomping
+ *   on user-handler data structures.
+ *
+ * A dedicated save area EXSLB is used (XXX: but it actually need not be
+ * these days, we could use EXGEN).
+ */
+INT_DEFINE_BEGIN(data_access_slb)
+	IVEC=0x380
+	IAREA=PACA_EXSLB
+	IRECONCILE=0
+	IDAR=1
+#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
+	IKVM_SKIP=1
+	IKVM_REAL=1
+#endif
+INT_DEFINE_END(data_access_slb)
 
 EXC_REAL_BEGIN(data_access_slb, 0x380, 0x80)
-	INT_HANDLER data_access_slb, 0x380, ool=1, area=PACA_EXSLB, dar=1, kvm=1
+	GEN_INT_ENTRY data_access_slb, virt=0
 EXC_REAL_END(data_access_slb, 0x380, 0x80)
 EXC_VIRT_BEGIN(data_access_slb, 0x4380, 0x80)
-	INT_HANDLER data_access_slb, 0x380, virt=1, area=PACA_EXSLB, dar=1
+	GEN_INT_ENTRY data_access_slb, virt=1
 EXC_VIRT_END(data_access_slb, 0x4380, 0x80)
-INT_KVM_HANDLER data_access_slb, 0x380, EXC_STD, PACA_EXSLB, 1
 EXC_COMMON_BEGIN(data_access_slb_common)
-	INT_COMMON 0x380, PACA_EXSLB, 1, 1, 0, 1, 0
+	GEN_COMMON data_access_slb
 	ld	r4,_DAR(r1)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 BEGIN_MMU_FTR_SECTION
@@ -1186,31 +1377,50 @@
 	bl	do_slb_fault
 	cmpdi	r3,0
 	bne-	1f
-	b	fast_exception_return
+	b	fast_interrupt_return
 1:	/* Error case */
 MMU_FTR_SECTION_ELSE
 	/* Radix case, access is outside page table range */
 	li	r3,-EFAULT
 ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX)
 	std	r3,RESULT(r1)
-	bl	save_nvgprs
 	RECONCILE_IRQ_STATE(r10, r11)
 	ld	r4,_DAR(r1)
 	ld	r5,RESULT(r1)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	do_bad_slb_fault
-	b	ret_from_except
+	b	interrupt_return
 
+	GEN_KVM data_access_slb
+
+
+/**
+ * Interrupt 0x400 - Instruction Storage Interrupt (ISI).
+ * This is a synchronous interrupt in response to an MMU fault due to an
+ * instruction fetch.
+ *
+ * Handling:
+ * Similar to DSI, though in response to fetch. The faulting address is found
+ * in SRR0 (rather than DAR), and status in SRR1 (rather than DSISR).
+ */
+INT_DEFINE_BEGIN(instruction_access)
+	IVEC=0x400
+	IISIDE=1
+	IDAR=1
+	IDSISR=1
+#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
+	IKVM_REAL=1
+#endif
+INT_DEFINE_END(instruction_access)
 
 EXC_REAL_BEGIN(instruction_access, 0x400, 0x80)
-	INT_HANDLER instruction_access, 0x400, kvm=1
+	GEN_INT_ENTRY instruction_access, virt=0
 EXC_REAL_END(instruction_access, 0x400, 0x80)
 EXC_VIRT_BEGIN(instruction_access, 0x4400, 0x80)
-	INT_HANDLER instruction_access, 0x400, virt=1
+	GEN_INT_ENTRY instruction_access, virt=1
 EXC_VIRT_END(instruction_access, 0x4400, 0x80)
-INT_KVM_HANDLER instruction_access, 0x400, EXC_STD, PACA_EXGEN, 0
 EXC_COMMON_BEGIN(instruction_access_common)
-	INT_COMMON 0x400, PACA_EXGEN, 1, 1, 1, 2, 2
+	GEN_COMMON instruction_access
 	ld	r4,_DAR(r1)
 	ld	r5,_DSISR(r1)
 BEGIN_MMU_FTR_SECTION
@@ -1221,16 +1431,37 @@
 	b	handle_page_fault
 ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX)
 
+	GEN_KVM instruction_access
+
+
+/**
+ * Interrupt 0x480 - Instruction Segment Interrupt (ISLB).
+ * This is a synchronous interrupt in response to an MMU fault due to an
+ * instruction fetch.
+ *
+ * Handling:
+ * Similar to DSLB, though in response to fetch. The faulting address is found
+ * in SRR0 (rather than DAR).
+ */
+INT_DEFINE_BEGIN(instruction_access_slb)
+	IVEC=0x480
+	IAREA=PACA_EXSLB
+	IRECONCILE=0
+	IISIDE=1
+	IDAR=1
+#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
+	IKVM_REAL=1
+#endif
+INT_DEFINE_END(instruction_access_slb)
 
 EXC_REAL_BEGIN(instruction_access_slb, 0x480, 0x80)
-	INT_HANDLER instruction_access_slb, 0x480, area=PACA_EXSLB, kvm=1
+	GEN_INT_ENTRY instruction_access_slb, virt=0
 EXC_REAL_END(instruction_access_slb, 0x480, 0x80)
 EXC_VIRT_BEGIN(instruction_access_slb, 0x4480, 0x80)
-	INT_HANDLER instruction_access_slb, 0x480, virt=1, area=PACA_EXSLB
+	GEN_INT_ENTRY instruction_access_slb, virt=1
 EXC_VIRT_END(instruction_access_slb, 0x4480, 0x80)
-INT_KVM_HANDLER instruction_access_slb, 0x480, EXC_STD, PACA_EXSLB, 0
 EXC_COMMON_BEGIN(instruction_access_slb_common)
-	INT_COMMON 0x480, PACA_EXSLB, 1, 1, 0, 2, 0
+	GEN_COMMON instruction_access_slb
 	ld	r4,_DAR(r1)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 BEGIN_MMU_FTR_SECTION
@@ -1238,54 +1469,125 @@
 	bl	do_slb_fault
 	cmpdi	r3,0
 	bne-	1f
-	b	fast_exception_return
+	b	fast_interrupt_return
 1:	/* Error case */
 MMU_FTR_SECTION_ELSE
 	/* Radix case, access is outside page table range */
 	li	r3,-EFAULT
 ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX)
 	std	r3,RESULT(r1)
-	bl	save_nvgprs
 	RECONCILE_IRQ_STATE(r10, r11)
 	ld	r4,_DAR(r1)
 	ld	r5,RESULT(r1)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	do_bad_slb_fault
-	b	ret_from_except
+	b	interrupt_return
+
+	GEN_KVM instruction_access_slb
+
+
+/**
+ * Interrupt 0x500 - External Interrupt.
+ * This is an asynchronous maskable interrupt in response to an "external
+ * exception" from the interrupt controller or hypervisor (e.g., device
+ * interrupt). It is maskable in hardware by clearing MSR[EE], and
+ * soft-maskable with IRQS_DISABLED mask (i.e., local_irq_disable()).
+ *
+ * When running in HV mode, Linux sets up the LPCR[LPES] bit such that
+ * interrupts are delivered with HSRR registers, guests use SRRs, which
+ * reqiures IHSRR_IF_HVMODE.
+ *
+ * On bare metal POWER9 and later, Linux sets the LPCR[HVICE] bit such that
+ * external interrupts are delivered as Hypervisor Virtualization Interrupts
+ * rather than External Interrupts.
+ *
+ * Handling:
+ * This calls into Linux IRQ handler. NVGPRs are not saved to reduce overhead,
+ * because registers at the time of the interrupt are not so important as it is
+ * asynchronous.
+ *
+ * If soft masked, the masked handler will note the pending interrupt for
+ * replay, and clear MSR[EE] in the interrupted context.
+ */
+INT_DEFINE_BEGIN(hardware_interrupt)
+	IVEC=0x500
+	IHSRR_IF_HVMODE=1
+	IMASK=IRQS_DISABLED
+	IKVM_REAL=1
+	IKVM_VIRT=1
+INT_DEFINE_END(hardware_interrupt)
 
 EXC_REAL_BEGIN(hardware_interrupt, 0x500, 0x100)
-	INT_HANDLER hardware_interrupt, 0x500, hsrr=EXC_HV_OR_STD, bitmask=IRQS_DISABLED, kvm=1
+	GEN_INT_ENTRY hardware_interrupt, virt=0
 EXC_REAL_END(hardware_interrupt, 0x500, 0x100)
 EXC_VIRT_BEGIN(hardware_interrupt, 0x4500, 0x100)
-	INT_HANDLER hardware_interrupt, 0x500, virt=1, hsrr=EXC_HV_OR_STD, bitmask=IRQS_DISABLED, kvm=1
+	GEN_INT_ENTRY hardware_interrupt, virt=1
 EXC_VIRT_END(hardware_interrupt, 0x4500, 0x100)
-INT_KVM_HANDLER hardware_interrupt, 0x500, EXC_HV_OR_STD, PACA_EXGEN, 0
-EXC_COMMON_ASYNC(hardware_interrupt_common, 0x500, do_IRQ)
+EXC_COMMON_BEGIN(hardware_interrupt_common)
+	GEN_COMMON hardware_interrupt
+	FINISH_NAP
+	RUNLATCH_ON
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	do_IRQ
+	b	interrupt_return
 
+	GEN_KVM hardware_interrupt
+
+
+/**
+ * Interrupt 0x600 - Alignment Interrupt
+ * This is a synchronous interrupt in response to data alignment fault.
+ */
+INT_DEFINE_BEGIN(alignment)
+	IVEC=0x600
+	IDAR=1
+	IDSISR=1
+#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
+	IKVM_REAL=1
+#endif
+INT_DEFINE_END(alignment)
 
 EXC_REAL_BEGIN(alignment, 0x600, 0x100)
-	INT_HANDLER alignment, 0x600, dar=1, dsisr=1, kvm=1
+	GEN_INT_ENTRY alignment, virt=0
 EXC_REAL_END(alignment, 0x600, 0x100)
 EXC_VIRT_BEGIN(alignment, 0x4600, 0x100)
-	INT_HANDLER alignment, 0x600, virt=1, dar=1, dsisr=1
+	GEN_INT_ENTRY alignment, virt=1
 EXC_VIRT_END(alignment, 0x4600, 0x100)
-INT_KVM_HANDLER alignment, 0x600, EXC_STD, PACA_EXGEN, 0
 EXC_COMMON_BEGIN(alignment_common)
-	INT_COMMON 0x600, PACA_EXGEN, 1, 1, 1, 1, 1
-	bl	save_nvgprs
+	GEN_COMMON alignment
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	alignment_exception
-	b	ret_from_except
+	REST_NVGPRS(r1) /* instruction emulation may change GPRs */
+	b	interrupt_return
 
+	GEN_KVM alignment
+
+
+/**
+ * Interrupt 0x700 - Program Interrupt (program check).
+ * This is a synchronous interrupt in response to various instruction faults:
+ * traps, privilege errors, TM errors, floating point exceptions.
+ *
+ * Handling:
+ * This interrupt may use the "emergency stack" in some cases when being taken
+ * from kernel context, which complicates handling.
+ */
+INT_DEFINE_BEGIN(program_check)
+	IVEC=0x700
+#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
+	IKVM_REAL=1
+#endif
+INT_DEFINE_END(program_check)
 
 EXC_REAL_BEGIN(program_check, 0x700, 0x100)
-	INT_HANDLER program_check, 0x700, kvm=1
+	GEN_INT_ENTRY program_check, virt=0
 EXC_REAL_END(program_check, 0x700, 0x100)
 EXC_VIRT_BEGIN(program_check, 0x4700, 0x100)
-	INT_HANDLER program_check, 0x700, virt=1
+	GEN_INT_ENTRY program_check, virt=1
 EXC_VIRT_END(program_check, 0x4700, 0x100)
-INT_KVM_HANDLER program_check, 0x700, EXC_STD, PACA_EXGEN, 0
 EXC_COMMON_BEGIN(program_check_common)
+	__GEN_COMMON_ENTRY program_check
+
 	/*
 	 * It's possible to receive a TM Bad Thing type program check with
 	 * userspace register values (in particular r1), but with SRR1 reporting
@@ -1310,28 +1612,47 @@
 	mr	r10,r1			/* Save r1			*/
 	ld	r1,PACAEMERGSP(r13)	/* Use emergency stack		*/
 	subi	r1,r1,INT_FRAME_SIZE	/* alloc stack frame		*/
-	INT_COMMON 0x700, PACA_EXGEN, 0, 1, 1, 0, 0
+	__ISTACK(program_check)=0
+	__GEN_COMMON_BODY program_check
 	b 3f
 2:
-	INT_COMMON 0x700, PACA_EXGEN, 1, 1, 1, 0, 0
+	__ISTACK(program_check)=1
+	__GEN_COMMON_BODY program_check
 3:
-	bl	save_nvgprs
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	program_check_exception
-	b	ret_from_except
+	REST_NVGPRS(r1) /* instruction emulation may change GPRs */
+	b	interrupt_return
 
+	GEN_KVM program_check
+
+
+/*
+ * Interrupt 0x800 - Floating-Point Unavailable Interrupt.
+ * This is a synchronous interrupt in response to executing an fp instruction
+ * with MSR[FP]=0.
+ *
+ * Handling:
+ * This will load FP registers and enable the FP bit if coming from userspace,
+ * otherwise report a bad kernel use of FP.
+ */
+INT_DEFINE_BEGIN(fp_unavailable)
+	IVEC=0x800
+	IRECONCILE=0
+#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
+	IKVM_REAL=1
+#endif
+INT_DEFINE_END(fp_unavailable)
 
 EXC_REAL_BEGIN(fp_unavailable, 0x800, 0x100)
-	INT_HANDLER fp_unavailable, 0x800, kvm=1
+	GEN_INT_ENTRY fp_unavailable, virt=0
 EXC_REAL_END(fp_unavailable, 0x800, 0x100)
 EXC_VIRT_BEGIN(fp_unavailable, 0x4800, 0x100)
-	INT_HANDLER fp_unavailable, 0x800, virt=1
+	GEN_INT_ENTRY fp_unavailable, virt=1
 EXC_VIRT_END(fp_unavailable, 0x4800, 0x100)
-INT_KVM_HANDLER fp_unavailable, 0x800, EXC_STD, PACA_EXGEN, 0
 EXC_COMMON_BEGIN(fp_unavailable_common)
-	INT_COMMON 0x800, PACA_EXGEN, 1, 1, 0, 0, 0
+	GEN_COMMON fp_unavailable
 	bne	1f			/* if from user, just load it up */
-	bl	save_nvgprs
 	RECONCILE_IRQ_STATE(r10, r11)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	kernel_fp_unavailable_exception
@@ -1348,64 +1669,168 @@
 END_FTR_SECTION_IFSET(CPU_FTR_TM)
 #endif
 	bl	load_up_fpu
-	b	fast_exception_return
+	b	fast_interrupt_return
 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
 2:	/* User process was in a transaction */
-	bl	save_nvgprs
 	RECONCILE_IRQ_STATE(r10, r11)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	fp_unavailable_tm
-	b	ret_from_except
+	b	interrupt_return
 #endif
 
+	GEN_KVM fp_unavailable
+
+
+/**
+ * Interrupt 0x900 - Decrementer Interrupt.
+ * This is an asynchronous interrupt in response to a decrementer exception
+ * (e.g., DEC has wrapped below zero). It is maskable in hardware by clearing
+ * MSR[EE], and soft-maskable with IRQS_DISABLED mask (i.e.,
+ * local_irq_disable()).
+ *
+ * Handling:
+ * This calls into Linux timer handler. NVGPRs are not saved (see 0x500).
+ *
+ * If soft masked, the masked handler will note the pending interrupt for
+ * replay, and bump the decrementer to a high value, leaving MSR[EE] enabled
+ * in the interrupted context.
+ * If PPC_WATCHDOG is configured, the soft masked handler will actually set
+ * things back up to run soft_nmi_interrupt as a regular interrupt handler
+ * on the emergency stack.
+ */
+INT_DEFINE_BEGIN(decrementer)
+	IVEC=0x900
+	IMASK=IRQS_DISABLED
+#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
+	IKVM_REAL=1
+#endif
+INT_DEFINE_END(decrementer)
 
 EXC_REAL_BEGIN(decrementer, 0x900, 0x80)
-	INT_HANDLER decrementer, 0x900, ool=1, bitmask=IRQS_DISABLED, kvm=1
+	GEN_INT_ENTRY decrementer, virt=0
 EXC_REAL_END(decrementer, 0x900, 0x80)
 EXC_VIRT_BEGIN(decrementer, 0x4900, 0x80)
-	INT_HANDLER decrementer, 0x900, virt=1, bitmask=IRQS_DISABLED
+	GEN_INT_ENTRY decrementer, virt=1
 EXC_VIRT_END(decrementer, 0x4900, 0x80)
-INT_KVM_HANDLER decrementer, 0x900, EXC_STD, PACA_EXGEN, 0
-EXC_COMMON_ASYNC(decrementer_common, 0x900, timer_interrupt)
+EXC_COMMON_BEGIN(decrementer_common)
+	GEN_COMMON decrementer
+	FINISH_NAP
+	RUNLATCH_ON
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	timer_interrupt
+	b	interrupt_return
 
+	GEN_KVM decrementer
+
+
+/**
+ * Interrupt 0x980 - Hypervisor Decrementer Interrupt.
+ * This is an asynchronous interrupt, similar to 0x900 but for the HDEC
+ * register.
+ *
+ * Handling:
+ * Linux does not use this outside KVM where it's used to keep a host timer
+ * while the guest is given control of DEC. It should normally be caught by
+ * the KVM test and routed there.
+ */
+INT_DEFINE_BEGIN(hdecrementer)
+	IVEC=0x980
+	IHSRR=1
+	ISTACK=0
+	IRECONCILE=0
+	IKVM_REAL=1
+	IKVM_VIRT=1
+INT_DEFINE_END(hdecrementer)
 
 EXC_REAL_BEGIN(hdecrementer, 0x980, 0x80)
-	INT_HANDLER hdecrementer, 0x980, hsrr=EXC_HV, kvm=1
+	GEN_INT_ENTRY hdecrementer, virt=0
 EXC_REAL_END(hdecrementer, 0x980, 0x80)
 EXC_VIRT_BEGIN(hdecrementer, 0x4980, 0x80)
-	INT_HANDLER hdecrementer, 0x980, virt=1, hsrr=EXC_HV, kvm=1
+	GEN_INT_ENTRY hdecrementer, virt=1
 EXC_VIRT_END(hdecrementer, 0x4980, 0x80)
-INT_KVM_HANDLER hdecrementer, 0x980, EXC_HV, PACA_EXGEN, 0
-EXC_COMMON(hdecrementer_common, 0x980, hdec_interrupt)
+EXC_COMMON_BEGIN(hdecrementer_common)
+	__GEN_COMMON_ENTRY hdecrementer
+	/*
+	 * Hypervisor decrementer interrupts not caught by the KVM test
+	 * shouldn't occur but are sometimes left pending on exit from a KVM
+	 * guest.  We don't need to do anything to clear them, as they are
+	 * edge-triggered.
+	 *
+	 * Be careful to avoid touching the kernel stack.
+	 */
+	ld	r10,PACA_EXGEN+EX_CTR(r13)
+	mtctr	r10
+	mtcrf	0x80,r9
+	ld	r9,PACA_EXGEN+EX_R9(r13)
+	ld	r10,PACA_EXGEN+EX_R10(r13)
+	ld	r11,PACA_EXGEN+EX_R11(r13)
+	ld	r12,PACA_EXGEN+EX_R12(r13)
+	ld	r13,PACA_EXGEN+EX_R13(r13)
+	HRFI_TO_KERNEL
 
+	GEN_KVM hdecrementer
+
+
+/**
+ * Interrupt 0xa00 - Directed Privileged Doorbell Interrupt.
+ * This is an asynchronous interrupt in response to a msgsndp doorbell.
+ * It is maskable in hardware by clearing MSR[EE], and soft-maskable with
+ * IRQS_DISABLED mask (i.e., local_irq_disable()).
+ *
+ * Handling:
+ * Guests may use this for IPIs between threads in a core if the
+ * hypervisor supports it. NVGPRS are not saved (see 0x500).
+ *
+ * If soft masked, the masked handler will note the pending interrupt for
+ * replay, leaving MSR[EE] enabled in the interrupted context because the
+ * doorbells are edge triggered.
+ */
+INT_DEFINE_BEGIN(doorbell_super)
+	IVEC=0xa00
+	IMASK=IRQS_DISABLED
+#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
+	IKVM_REAL=1
+#endif
+INT_DEFINE_END(doorbell_super)
 
 EXC_REAL_BEGIN(doorbell_super, 0xa00, 0x100)
-	INT_HANDLER doorbell_super, 0xa00, bitmask=IRQS_DISABLED, kvm=1
+	GEN_INT_ENTRY doorbell_super, virt=0
 EXC_REAL_END(doorbell_super, 0xa00, 0x100)
 EXC_VIRT_BEGIN(doorbell_super, 0x4a00, 0x100)
-	INT_HANDLER doorbell_super, 0xa00, virt=1, bitmask=IRQS_DISABLED
+	GEN_INT_ENTRY doorbell_super, virt=1
 EXC_VIRT_END(doorbell_super, 0x4a00, 0x100)
-INT_KVM_HANDLER doorbell_super, 0xa00, EXC_STD, PACA_EXGEN, 0
+EXC_COMMON_BEGIN(doorbell_super_common)
+	GEN_COMMON doorbell_super
+	FINISH_NAP
+	RUNLATCH_ON
+	addi	r3,r1,STACK_FRAME_OVERHEAD
 #ifdef CONFIG_PPC_DOORBELL
-EXC_COMMON_ASYNC(doorbell_super_common, 0xa00, doorbell_exception)
+	bl	doorbell_exception
 #else
-EXC_COMMON_ASYNC(doorbell_super_common, 0xa00, unknown_exception)
+	bl	unknown_exception
 #endif
+	b	interrupt_return
+
+	GEN_KVM doorbell_super
 
 
 EXC_REAL_NONE(0xb00, 0x100)
 EXC_VIRT_NONE(0x4b00, 0x100)
 
-/*
- * system call / hypercall (0xc00, 0x4c00)
- *
- * The system call exception is invoked with "sc 0" and does not alter HV bit.
- *
- * The hypercall is invoked with "sc 1" and sets HV=1.
+/**
+ * Interrupt 0xc00 - System Call Interrupt (syscall, hcall).
+ * This is a synchronous interrupt invoked with the "sc" instruction. The
+ * system call is invoked with "sc 0" and does not alter the HV bit, so it
+ * is directed to the currently running OS. The hypercall is invoked with
+ * "sc 1" and it sets HV=1, so it elevates to hypervisor.
  *
  * In HPT, sc 1 always goes to 0xc00 real mode. In RADIX, sc 1 can go to
  * 0x4c00 virtual mode.
  *
+ * Handling:
+ * If the KVM test fires then it was due to a hypercall and is accordingly
+ * routed to KVM. Otherwise this executes a normal Linux system call.
+ *
  * Call convention:
  *
  * syscall and hypercalls register conventions are documented in
@@ -1417,6 +1842,12 @@
  * without saving, though xer is not a good idea to use, as hardware may
  * interpret some bits so it may be costly to change them.
  */
+INT_DEFINE_BEGIN(system_call)
+	IVEC=0xc00
+	IKVM_REAL=1
+	IKVM_VIRT=1
+INT_DEFINE_END(system_call)
+
 .macro SYSTEM_CALL virt
 #ifdef CONFIG_KVM_BOOK3S_64_HANDLER
 	/*
@@ -1431,7 +1862,7 @@
 	GET_PACA(r13)
 	std	r10,PACA_EXGEN+EX_R10(r13)
 	INTERRUPT_TO_KERNEL
-	KVMTEST system_call EXC_STD 0xc00 /* uses r10, branch to system_call_kvm */
+	KVMTEST system_call /* uses r10, branch to system_call_kvm */
 	mfctr	r9
 #else
 	mr	r9,r13
@@ -1490,6 +1921,7 @@
 EXC_VIRT_END(system_call, 0x4c00, 0x100)
 
 #ifdef CONFIG_KVM_BOOK3S_64_HANDLER
+TRAMP_REAL_BEGIN(system_call_kvm)
 	/*
 	 * This is a hcall, so register convention is as above, with these
 	 * differences:
@@ -1497,43 +1929,95 @@
 	 * ctr = orig r13
 	 * orig r10 saved in PACA
 	 */
-TRAMP_KVM_BEGIN(system_call_kvm)
 	 /*
 	  * Save the PPR (on systems that support it) before changing to
 	  * HMT_MEDIUM. That allows the KVM code to save that value into the
 	  * guest state (it is the guest's PPR value).
 	  */
-	OPT_GET_SPR(r10, SPRN_PPR, CPU_FTR_HAS_PPR)
+BEGIN_FTR_SECTION
+	mfspr	r10,SPRN_PPR
+	std	r10,HSTATE_PPR(r13)
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
 	HMT_MEDIUM
-	OPT_SAVE_REG_TO_PACA(PACA_EXGEN+EX_PPR, r10, CPU_FTR_HAS_PPR)
 	mfctr	r10
 	SET_SCRATCH0(r10)
-	std	r9,PACA_EXGEN+EX_R9(r13)
-	mfcr	r9
-	KVM_HANDLER 0xc00, EXC_STD, PACA_EXGEN, 0
+	mfcr	r10
+	std	r12,HSTATE_SCRATCH0(r13)
+	sldi	r12,r10,32
+	ori	r12,r12,0xc00
+#ifdef CONFIG_RELOCATABLE
+	/*
+	 * Requires __LOAD_FAR_HANDLER beause kvmppc_interrupt lives
+	 * outside the head section.
+	 */
+	__LOAD_FAR_HANDLER(r10, kvmppc_interrupt)
+	mtctr   r10
+	ld	r10,PACA_EXGEN+EX_R10(r13)
+	bctr
+#else
+	ld	r10,PACA_EXGEN+EX_R10(r13)
+	b       kvmppc_interrupt
+#endif
 #endif
 
 
+/**
+ * Interrupt 0xd00 - Trace Interrupt.
+ * This is a synchronous interrupt in response to instruction step or
+ * breakpoint faults.
+ */
+INT_DEFINE_BEGIN(single_step)
+	IVEC=0xd00
+#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
+	IKVM_REAL=1
+#endif
+INT_DEFINE_END(single_step)
+
 EXC_REAL_BEGIN(single_step, 0xd00, 0x100)
-	INT_HANDLER single_step, 0xd00, kvm=1
+	GEN_INT_ENTRY single_step, virt=0
 EXC_REAL_END(single_step, 0xd00, 0x100)
 EXC_VIRT_BEGIN(single_step, 0x4d00, 0x100)
-	INT_HANDLER single_step, 0xd00, virt=1
+	GEN_INT_ENTRY single_step, virt=1
 EXC_VIRT_END(single_step, 0x4d00, 0x100)
-INT_KVM_HANDLER single_step, 0xd00, EXC_STD, PACA_EXGEN, 0
-EXC_COMMON(single_step_common, 0xd00, single_step_exception)
+EXC_COMMON_BEGIN(single_step_common)
+	GEN_COMMON single_step
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	single_step_exception
+	b	interrupt_return
 
+	GEN_KVM single_step
+
+
+/**
+ * Interrupt 0xe00 - Hypervisor Data Storage Interrupt (HDSI).
+ * This is a synchronous interrupt in response to an MMU fault caused by a
+ * guest data access.
+ *
+ * Handling:
+ * This should always get routed to KVM. In radix MMU mode, this is caused
+ * by a guest nested radix access that can't be performed due to the
+ * partition scope page table. In hash mode, this can be caused by guests
+ * running with translation disabled (virtual real mode) or with VPM enabled.
+ * KVM will update the page table structures or disallow the access.
+ */
+INT_DEFINE_BEGIN(h_data_storage)
+	IVEC=0xe00
+	IHSRR=1
+	IDAR=1
+	IDSISR=1
+	IKVM_SKIP=1
+	IKVM_REAL=1
+	IKVM_VIRT=1
+INT_DEFINE_END(h_data_storage)
 
 EXC_REAL_BEGIN(h_data_storage, 0xe00, 0x20)
-	INT_HANDLER h_data_storage, 0xe00, ool=1, hsrr=EXC_HV, dar=1, dsisr=1, kvm=1
+	GEN_INT_ENTRY h_data_storage, virt=0, ool=1
 EXC_REAL_END(h_data_storage, 0xe00, 0x20)
 EXC_VIRT_BEGIN(h_data_storage, 0x4e00, 0x20)
-	INT_HANDLER h_data_storage, 0xe00, ool=1, virt=1, hsrr=EXC_HV, dar=1, dsisr=1, kvm=1
+	GEN_INT_ENTRY h_data_storage, virt=1, ool=1
 EXC_VIRT_END(h_data_storage, 0x4e00, 0x20)
-INT_KVM_HANDLER h_data_storage, 0xe00, EXC_HV, PACA_EXGEN, 1
 EXC_COMMON_BEGIN(h_data_storage_common)
-	INT_COMMON 0xe00, PACA_EXGEN, 1, 1, 1, 1, 1
-	bl      save_nvgprs
+	GEN_COMMON h_data_storage
 	addi    r3,r1,STACK_FRAME_OVERHEAD
 BEGIN_MMU_FTR_SECTION
 	ld	r4,_DAR(r1)
@@ -1542,56 +2026,125 @@
 MMU_FTR_SECTION_ELSE
 	bl      unknown_exception
 ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_TYPE_RADIX)
-	b       ret_from_except
+	b       interrupt_return
 
+	GEN_KVM h_data_storage
+
+
+/**
+ * Interrupt 0xe20 - Hypervisor Instruction Storage Interrupt (HISI).
+ * This is a synchronous interrupt in response to an MMU fault caused by a
+ * guest instruction fetch, similar to HDSI.
+ */
+INT_DEFINE_BEGIN(h_instr_storage)
+	IVEC=0xe20
+	IHSRR=1
+	IKVM_REAL=1
+	IKVM_VIRT=1
+INT_DEFINE_END(h_instr_storage)
 
 EXC_REAL_BEGIN(h_instr_storage, 0xe20, 0x20)
-	INT_HANDLER h_instr_storage, 0xe20, ool=1, hsrr=EXC_HV, kvm=1
+	GEN_INT_ENTRY h_instr_storage, virt=0, ool=1
 EXC_REAL_END(h_instr_storage, 0xe20, 0x20)
 EXC_VIRT_BEGIN(h_instr_storage, 0x4e20, 0x20)
-	INT_HANDLER h_instr_storage, 0xe20, ool=1, virt=1, hsrr=EXC_HV, kvm=1
+	GEN_INT_ENTRY h_instr_storage, virt=1, ool=1
 EXC_VIRT_END(h_instr_storage, 0x4e20, 0x20)
-INT_KVM_HANDLER h_instr_storage, 0xe20, EXC_HV, PACA_EXGEN, 0
-EXC_COMMON(h_instr_storage_common, 0xe20, unknown_exception)
+EXC_COMMON_BEGIN(h_instr_storage_common)
+	GEN_COMMON h_instr_storage
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	unknown_exception
+	b	interrupt_return
 
+	GEN_KVM h_instr_storage
+
+
+/**
+ * Interrupt 0xe40 - Hypervisor Emulation Assistance Interrupt.
+ */
+INT_DEFINE_BEGIN(emulation_assist)
+	IVEC=0xe40
+	IHSRR=1
+	IKVM_REAL=1
+	IKVM_VIRT=1
+INT_DEFINE_END(emulation_assist)
 
 EXC_REAL_BEGIN(emulation_assist, 0xe40, 0x20)
-	INT_HANDLER emulation_assist, 0xe40, ool=1, hsrr=EXC_HV, kvm=1
+	GEN_INT_ENTRY emulation_assist, virt=0, ool=1
 EXC_REAL_END(emulation_assist, 0xe40, 0x20)
 EXC_VIRT_BEGIN(emulation_assist, 0x4e40, 0x20)
-	INT_HANDLER emulation_assist, 0xe40, ool=1, virt=1, hsrr=EXC_HV, kvm=1
+	GEN_INT_ENTRY emulation_assist, virt=1, ool=1
 EXC_VIRT_END(emulation_assist, 0x4e40, 0x20)
-INT_KVM_HANDLER emulation_assist, 0xe40, EXC_HV, PACA_EXGEN, 0
-EXC_COMMON(emulation_assist_common, 0xe40, emulation_assist_interrupt)
+EXC_COMMON_BEGIN(emulation_assist_common)
+	GEN_COMMON emulation_assist
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	emulation_assist_interrupt
+	REST_NVGPRS(r1) /* instruction emulation may change GPRs */
+	b	interrupt_return
+
+	GEN_KVM emulation_assist
 
 
-/*
- * hmi_exception trampoline is a special case. It jumps to hmi_exception_early
- * first, and then eventaully from there to the trampoline to get into virtual
- * mode.
+/**
+ * Interrupt 0xe60 - Hypervisor Maintenance Interrupt (HMI).
+ * This is an asynchronous interrupt caused by a Hypervisor Maintenance
+ * Exception. It is always taken in real mode but uses HSRR registers
+ * unlike SRESET and MCE.
+ *
+ * It is maskable in hardware by clearing MSR[EE], and partially soft-maskable
+ * with IRQS_DISABLED mask (i.e., local_irq_disable()).
+ *
+ * Handling:
+ * This is a special case, this is handled similarly to machine checks, with an
+ * initial real mode handler that is not soft-masked, which attempts to fix the
+ * problem. Then a regular handler which is soft-maskable and reports the
+ * problem.
+ *
+ * The emergency stack is used for the early real mode handler.
+ *
+ * XXX: unclear why MCE and HMI schemes could not be made common, e.g.,
+ * either use soft-masking for the MCE, or use irq_work for the HMI.
+ *
+ * KVM:
+ * Unlike MCE, this calls into KVM without calling the real mode handler
+ * first.
  */
+INT_DEFINE_BEGIN(hmi_exception_early)
+	IVEC=0xe60
+	IHSRR=1
+	IREALMODE_COMMON=1
+	ISTACK=0
+	IRECONCILE=0
+	IKUAP=0 /* We don't touch AMR here, we never go to virtual mode */
+	IKVM_REAL=1
+INT_DEFINE_END(hmi_exception_early)
+
+INT_DEFINE_BEGIN(hmi_exception)
+	IVEC=0xe60
+	IHSRR=1
+	IMASK=IRQS_DISABLED
+	IKVM_REAL=1
+INT_DEFINE_END(hmi_exception)
+
 EXC_REAL_BEGIN(hmi_exception, 0xe60, 0x20)
-	INT_HANDLER hmi_exception, 0xe60, ool=1, early=1, hsrr=EXC_HV, ri=0, kvm=1
+	GEN_INT_ENTRY hmi_exception_early, virt=0, ool=1
 EXC_REAL_END(hmi_exception, 0xe60, 0x20)
 EXC_VIRT_NONE(0x4e60, 0x20)
-INT_KVM_HANDLER hmi_exception, 0xe60, EXC_HV, PACA_EXGEN, 0
+
 EXC_COMMON_BEGIN(hmi_exception_early_common)
-	mtctr	r10			/* Restore ctr */
-	mfspr	r11,SPRN_HSRR0		/* Save HSRR0 */
-	mfspr	r12,SPRN_HSRR1		/* Save HSRR1 */
+	__GEN_REALMODE_COMMON_ENTRY hmi_exception_early
+
 	mr	r10,r1			/* Save r1 */
 	ld	r1,PACAEMERGSP(r13)	/* Use emergency stack for realmode */
 	subi	r1,r1,INT_FRAME_SIZE	/* alloc stack frame		*/
 
-	/* We don't touch AMR here, we never go to virtual mode */
-	INT_COMMON 0xe60, PACA_EXGEN, 0, 0, 0, 0, 0
+	__GEN_COMMON_BODY hmi_exception_early
 
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	hmi_exception_realmode
 	cmpdi	cr0,r3,0
 	bne	1f
 
-	EXCEPTION_RESTORE_REGS EXC_HV
+	EXCEPTION_RESTORE_REGS hsrr=1
 	HRFI_TO_USER_OR_KERNEL
 
 1:
@@ -1599,41 +2152,84 @@
 	 * Go to virtual mode and pull the HMI event information from
 	 * firmware.
 	 */
-	EXCEPTION_RESTORE_REGS EXC_HV
-	INT_HANDLER hmi_exception, 0xe60, hsrr=EXC_HV, bitmask=IRQS_DISABLED, kvm=1
+	EXCEPTION_RESTORE_REGS hsrr=1
+	GEN_INT_ENTRY hmi_exception, virt=0
+
+	GEN_KVM hmi_exception_early
 
 EXC_COMMON_BEGIN(hmi_exception_common)
-	INT_COMMON 0xe60, PACA_EXGEN, 1, 1, 1, 0, 0
+	GEN_COMMON hmi_exception
 	FINISH_NAP
 	RUNLATCH_ON
-	bl	save_nvgprs
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	handle_hmi_exception
-	b	ret_from_except
+	b	interrupt_return
 
+	GEN_KVM hmi_exception
+
+
+/**
+ * Interrupt 0xe80 - Directed Hypervisor Doorbell Interrupt.
+ * This is an asynchronous interrupt in response to a msgsnd doorbell.
+ * Similar to the 0xa00 doorbell but for host rather than guest.
+ */
+INT_DEFINE_BEGIN(h_doorbell)
+	IVEC=0xe80
+	IHSRR=1
+	IMASK=IRQS_DISABLED
+	IKVM_REAL=1
+	IKVM_VIRT=1
+INT_DEFINE_END(h_doorbell)
 
 EXC_REAL_BEGIN(h_doorbell, 0xe80, 0x20)
-	INT_HANDLER h_doorbell, 0xe80, ool=1, hsrr=EXC_HV, bitmask=IRQS_DISABLED, kvm=1
+	GEN_INT_ENTRY h_doorbell, virt=0, ool=1
 EXC_REAL_END(h_doorbell, 0xe80, 0x20)
 EXC_VIRT_BEGIN(h_doorbell, 0x4e80, 0x20)
-	INT_HANDLER h_doorbell, 0xe80, ool=1, virt=1, hsrr=EXC_HV, bitmask=IRQS_DISABLED, kvm=1
+	GEN_INT_ENTRY h_doorbell, virt=1, ool=1
 EXC_VIRT_END(h_doorbell, 0x4e80, 0x20)
-INT_KVM_HANDLER h_doorbell, 0xe80, EXC_HV, PACA_EXGEN, 0
+EXC_COMMON_BEGIN(h_doorbell_common)
+	GEN_COMMON h_doorbell
+	FINISH_NAP
+	RUNLATCH_ON
+	addi	r3,r1,STACK_FRAME_OVERHEAD
 #ifdef CONFIG_PPC_DOORBELL
-EXC_COMMON_ASYNC(h_doorbell_common, 0xe80, doorbell_exception)
+	bl	doorbell_exception
 #else
-EXC_COMMON_ASYNC(h_doorbell_common, 0xe80, unknown_exception)
+	bl	unknown_exception
 #endif
+	b	interrupt_return
 
+	GEN_KVM h_doorbell
+
+
+/**
+ * Interrupt 0xea0 - Hypervisor Virtualization Interrupt.
+ * This is an asynchronous interrupt in response to an "external exception".
+ * Similar to 0x500 but for host only.
+ */
+INT_DEFINE_BEGIN(h_virt_irq)
+	IVEC=0xea0
+	IHSRR=1
+	IMASK=IRQS_DISABLED
+	IKVM_REAL=1
+	IKVM_VIRT=1
+INT_DEFINE_END(h_virt_irq)
 
 EXC_REAL_BEGIN(h_virt_irq, 0xea0, 0x20)
-	INT_HANDLER h_virt_irq, 0xea0, ool=1, hsrr=EXC_HV, bitmask=IRQS_DISABLED, kvm=1
+	GEN_INT_ENTRY h_virt_irq, virt=0, ool=1
 EXC_REAL_END(h_virt_irq, 0xea0, 0x20)
 EXC_VIRT_BEGIN(h_virt_irq, 0x4ea0, 0x20)
-	INT_HANDLER h_virt_irq, 0xea0, ool=1, virt=1, hsrr=EXC_HV, bitmask=IRQS_DISABLED, kvm=1
+	GEN_INT_ENTRY h_virt_irq, virt=1, ool=1
 EXC_VIRT_END(h_virt_irq, 0x4ea0, 0x20)
-INT_KVM_HANDLER h_virt_irq, 0xea0, EXC_HV, PACA_EXGEN, 0
-EXC_COMMON_ASYNC(h_virt_irq_common, 0xea0, do_IRQ)
+EXC_COMMON_BEGIN(h_virt_irq_common)
+	GEN_COMMON h_virt_irq
+	FINISH_NAP
+	RUNLATCH_ON
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	do_IRQ
+	b	interrupt_return
+
+	GEN_KVM h_virt_irq
 
 
 EXC_REAL_NONE(0xec0, 0x20)
@@ -1642,25 +2238,69 @@
 EXC_VIRT_NONE(0x4ee0, 0x20)
 
 
+/*
+ * Interrupt 0xf00 - Performance Monitor Interrupt (PMI, PMU).
+ * This is an asynchronous interrupt in response to a PMU exception.
+ * It is maskable in hardware by clearing MSR[EE], and soft-maskable with
+ * IRQS_PMI_DISABLED mask (NOTE: NOT local_irq_disable()).
+ *
+ * Handling:
+ * This calls into the perf subsystem.
+ *
+ * Like the watchdog soft-nmi, it appears an NMI interrupt to Linux, in that it
+ * runs under local_irq_disable. However it may be soft-masked in
+ * powerpc-specific code.
+ *
+ * If soft masked, the masked handler will note the pending interrupt for
+ * replay, and clear MSR[EE] in the interrupted context.
+ */
+INT_DEFINE_BEGIN(performance_monitor)
+	IVEC=0xf00
+	IMASK=IRQS_PMI_DISABLED
+#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
+	IKVM_REAL=1
+#endif
+INT_DEFINE_END(performance_monitor)
+
 EXC_REAL_BEGIN(performance_monitor, 0xf00, 0x20)
-	INT_HANDLER performance_monitor, 0xf00, ool=1, bitmask=IRQS_PMI_DISABLED, kvm=1
+	GEN_INT_ENTRY performance_monitor, virt=0, ool=1
 EXC_REAL_END(performance_monitor, 0xf00, 0x20)
 EXC_VIRT_BEGIN(performance_monitor, 0x4f00, 0x20)
-	INT_HANDLER performance_monitor, 0xf00, ool=1, virt=1, bitmask=IRQS_PMI_DISABLED
+	GEN_INT_ENTRY performance_monitor, virt=1, ool=1
 EXC_VIRT_END(performance_monitor, 0x4f00, 0x20)
-INT_KVM_HANDLER performance_monitor, 0xf00, EXC_STD, PACA_EXGEN, 0
-EXC_COMMON_ASYNC(performance_monitor_common, 0xf00, performance_monitor_exception)
+EXC_COMMON_BEGIN(performance_monitor_common)
+	GEN_COMMON performance_monitor
+	FINISH_NAP
+	RUNLATCH_ON
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	performance_monitor_exception
+	b	interrupt_return
 
+	GEN_KVM performance_monitor
+
+
+/**
+ * Interrupt 0xf20 - Vector Unavailable Interrupt.
+ * This is a synchronous interrupt in response to
+ * executing a vector (or altivec) instruction with MSR[VEC]=0.
+ * Similar to FP unavailable.
+ */
+INT_DEFINE_BEGIN(altivec_unavailable)
+	IVEC=0xf20
+	IRECONCILE=0
+#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
+	IKVM_REAL=1
+#endif
+INT_DEFINE_END(altivec_unavailable)
 
 EXC_REAL_BEGIN(altivec_unavailable, 0xf20, 0x20)
-	INT_HANDLER altivec_unavailable, 0xf20, ool=1, kvm=1
+	GEN_INT_ENTRY altivec_unavailable, virt=0, ool=1
 EXC_REAL_END(altivec_unavailable, 0xf20, 0x20)
 EXC_VIRT_BEGIN(altivec_unavailable, 0x4f20, 0x20)
-	INT_HANDLER altivec_unavailable, 0xf20, ool=1, virt=1
+	GEN_INT_ENTRY altivec_unavailable, virt=1, ool=1
 EXC_VIRT_END(altivec_unavailable, 0x4f20, 0x20)
-INT_KVM_HANDLER altivec_unavailable, 0xf20, EXC_STD, PACA_EXGEN, 0
 EXC_COMMON_BEGIN(altivec_unavailable_common)
-	INT_COMMON 0xf20, PACA_EXGEN, 1, 1, 0, 0, 0
+	GEN_COMMON altivec_unavailable
 #ifdef CONFIG_ALTIVEC
 BEGIN_FTR_SECTION
 	beq	1f
@@ -1674,34 +2314,47 @@
   END_FTR_SECTION_NESTED(CPU_FTR_TM, CPU_FTR_TM, 69)
 #endif
 	bl	load_up_altivec
-	b	fast_exception_return
+	b	fast_interrupt_return
 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
 2:	/* User process was in a transaction */
-	bl	save_nvgprs
 	RECONCILE_IRQ_STATE(r10, r11)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	altivec_unavailable_tm
-	b	ret_from_except
+	b	interrupt_return
 #endif
 1:
 END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 #endif
-	bl	save_nvgprs
 	RECONCILE_IRQ_STATE(r10, r11)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	altivec_unavailable_exception
-	b	ret_from_except
+	b	interrupt_return
 
+	GEN_KVM altivec_unavailable
+
+
+/**
+ * Interrupt 0xf40 - VSX Unavailable Interrupt.
+ * This is a synchronous interrupt in response to
+ * executing a VSX instruction with MSR[VSX]=0.
+ * Similar to FP unavailable.
+ */
+INT_DEFINE_BEGIN(vsx_unavailable)
+	IVEC=0xf40
+	IRECONCILE=0
+#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
+	IKVM_REAL=1
+#endif
+INT_DEFINE_END(vsx_unavailable)
 
 EXC_REAL_BEGIN(vsx_unavailable, 0xf40, 0x20)
-	INT_HANDLER vsx_unavailable, 0xf40, ool=1, kvm=1
+	GEN_INT_ENTRY vsx_unavailable, virt=0, ool=1
 EXC_REAL_END(vsx_unavailable, 0xf40, 0x20)
 EXC_VIRT_BEGIN(vsx_unavailable, 0x4f40, 0x20)
-	INT_HANDLER vsx_unavailable, 0xf40, ool=1, virt=1
+	GEN_INT_ENTRY vsx_unavailable, virt=1, ool=1
 EXC_VIRT_END(vsx_unavailable, 0x4f40, 0x20)
-INT_KVM_HANDLER vsx_unavailable, 0xf40, EXC_STD, PACA_EXGEN, 0
 EXC_COMMON_BEGIN(vsx_unavailable_common)
-	INT_COMMON 0xf40, PACA_EXGEN, 1, 1, 0, 0, 0
+	GEN_COMMON vsx_unavailable
 #ifdef CONFIG_VSX
 BEGIN_FTR_SECTION
 	beq	1f
@@ -1717,40 +2370,78 @@
 	b	load_up_vsx
 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
 2:	/* User process was in a transaction */
-	bl	save_nvgprs
 	RECONCILE_IRQ_STATE(r10, r11)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	vsx_unavailable_tm
-	b	ret_from_except
+	b	interrupt_return
 #endif
 1:
 END_FTR_SECTION_IFSET(CPU_FTR_VSX)
 #endif
-	bl	save_nvgprs
 	RECONCILE_IRQ_STATE(r10, r11)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	vsx_unavailable_exception
-	b	ret_from_except
+	b	interrupt_return
 
+	GEN_KVM vsx_unavailable
+
+
+/**
+ * Interrupt 0xf60 - Facility Unavailable Interrupt.
+ * This is a synchronous interrupt in response to
+ * executing an instruction without access to the facility that can be
+ * resolved by the OS (e.g., FSCR, MSR).
+ * Similar to FP unavailable.
+ */
+INT_DEFINE_BEGIN(facility_unavailable)
+	IVEC=0xf60
+#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
+	IKVM_REAL=1
+#endif
+INT_DEFINE_END(facility_unavailable)
 
 EXC_REAL_BEGIN(facility_unavailable, 0xf60, 0x20)
-	INT_HANDLER facility_unavailable, 0xf60, ool=1, kvm=1
+	GEN_INT_ENTRY facility_unavailable, virt=0, ool=1
 EXC_REAL_END(facility_unavailable, 0xf60, 0x20)
 EXC_VIRT_BEGIN(facility_unavailable, 0x4f60, 0x20)
-	INT_HANDLER facility_unavailable, 0xf60, ool=1, virt=1
+	GEN_INT_ENTRY facility_unavailable, virt=1, ool=1
 EXC_VIRT_END(facility_unavailable, 0x4f60, 0x20)
-INT_KVM_HANDLER facility_unavailable, 0xf60, EXC_STD, PACA_EXGEN, 0
-EXC_COMMON(facility_unavailable_common, 0xf60, facility_unavailable_exception)
+EXC_COMMON_BEGIN(facility_unavailable_common)
+	GEN_COMMON facility_unavailable
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	facility_unavailable_exception
+	b	interrupt_return
 
+	GEN_KVM facility_unavailable
+
+
+/**
+ * Interrupt 0xf60 - Hypervisor Facility Unavailable Interrupt.
+ * This is a synchronous interrupt in response to
+ * executing an instruction without access to the facility that can only
+ * be resolved in HV mode (e.g., HFSCR).
+ * Similar to FP unavailable.
+ */
+INT_DEFINE_BEGIN(h_facility_unavailable)
+	IVEC=0xf80
+	IHSRR=1
+	IKVM_REAL=1
+	IKVM_VIRT=1
+INT_DEFINE_END(h_facility_unavailable)
 
 EXC_REAL_BEGIN(h_facility_unavailable, 0xf80, 0x20)
-	INT_HANDLER h_facility_unavailable, 0xf80, ool=1, hsrr=EXC_HV, kvm=1
+	GEN_INT_ENTRY h_facility_unavailable, virt=0, ool=1
 EXC_REAL_END(h_facility_unavailable, 0xf80, 0x20)
 EXC_VIRT_BEGIN(h_facility_unavailable, 0x4f80, 0x20)
-	INT_HANDLER h_facility_unavailable, 0xf80, ool=1, virt=1, hsrr=EXC_HV, kvm=1
+	GEN_INT_ENTRY h_facility_unavailable, virt=1, ool=1
 EXC_VIRT_END(h_facility_unavailable, 0x4f80, 0x20)
-INT_KVM_HANDLER h_facility_unavailable, 0xf80, EXC_HV, PACA_EXGEN, 0
-EXC_COMMON(h_facility_unavailable_common, 0xf80, facility_unavailable_exception)
+EXC_COMMON_BEGIN(h_facility_unavailable_common)
+	GEN_COMMON h_facility_unavailable
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	facility_unavailable_exception
+	b	interrupt_return
+
+	GEN_KVM h_facility_unavailable
 
 
 EXC_REAL_NONE(0xfa0, 0x20)
@@ -1766,56 +2457,95 @@
 EXC_VIRT_NONE(0x5100, 0x100)
 
 #ifdef CONFIG_CBE_RAS
+INT_DEFINE_BEGIN(cbe_system_error)
+	IVEC=0x1200
+	IHSRR=1
+	IKVM_SKIP=1
+	IKVM_REAL=1
+INT_DEFINE_END(cbe_system_error)
+
 EXC_REAL_BEGIN(cbe_system_error, 0x1200, 0x100)
-	INT_HANDLER cbe_system_error, 0x1200, ool=1, hsrr=EXC_HV, kvm=1
+	GEN_INT_ENTRY cbe_system_error, virt=0
 EXC_REAL_END(cbe_system_error, 0x1200, 0x100)
 EXC_VIRT_NONE(0x5200, 0x100)
-INT_KVM_HANDLER cbe_system_error, 0x1200, EXC_HV, PACA_EXGEN, 1
-EXC_COMMON(cbe_system_error_common, 0x1200, cbe_system_error_exception)
+EXC_COMMON_BEGIN(cbe_system_error_common)
+	GEN_COMMON cbe_system_error
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	cbe_system_error_exception
+	b	interrupt_return
+
+	GEN_KVM cbe_system_error
+
 #else /* CONFIG_CBE_RAS */
 EXC_REAL_NONE(0x1200, 0x100)
 EXC_VIRT_NONE(0x5200, 0x100)
 #endif
 
 
+INT_DEFINE_BEGIN(instruction_breakpoint)
+	IVEC=0x1300
+#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
+	IKVM_SKIP=1
+	IKVM_REAL=1
+#endif
+INT_DEFINE_END(instruction_breakpoint)
+
 EXC_REAL_BEGIN(instruction_breakpoint, 0x1300, 0x100)
-	INT_HANDLER instruction_breakpoint, 0x1300, kvm=1
+	GEN_INT_ENTRY instruction_breakpoint, virt=0
 EXC_REAL_END(instruction_breakpoint, 0x1300, 0x100)
 EXC_VIRT_BEGIN(instruction_breakpoint, 0x5300, 0x100)
-	INT_HANDLER instruction_breakpoint, 0x1300, virt=1
+	GEN_INT_ENTRY instruction_breakpoint, virt=1
 EXC_VIRT_END(instruction_breakpoint, 0x5300, 0x100)
-INT_KVM_HANDLER instruction_breakpoint, 0x1300, EXC_STD, PACA_EXGEN, 1
-EXC_COMMON(instruction_breakpoint_common, 0x1300, instruction_breakpoint_exception)
+EXC_COMMON_BEGIN(instruction_breakpoint_common)
+	GEN_COMMON instruction_breakpoint
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	instruction_breakpoint_exception
+	b	interrupt_return
+
+	GEN_KVM instruction_breakpoint
 
 
 EXC_REAL_NONE(0x1400, 0x100)
 EXC_VIRT_NONE(0x5400, 0x100)
 
-EXC_REAL_BEGIN(denorm_exception_hv, 0x1500, 0x100)
-	INT_HANDLER denorm_exception_hv, 0x1500, early=2, hsrr=EXC_HV
+/**
+ * Interrupt 0x1500 - Soft Patch Interrupt
+ *
+ * Handling:
+ * This is an implementation specific interrupt which can be used for a
+ * range of exceptions.
+ *
+ * This interrupt handler is unique in that it runs the denormal assist
+ * code even for guests (and even in guest context) without going to KVM,
+ * for speed. POWER9 does not raise denorm exceptions, so this special case
+ * could be phased out in future to reduce special cases.
+ */
+INT_DEFINE_BEGIN(denorm_exception)
+	IVEC=0x1500
+	IHSRR=1
+	IBRANCH_COMMON=0
+	IKVM_REAL=1
+INT_DEFINE_END(denorm_exception)
+
+EXC_REAL_BEGIN(denorm_exception, 0x1500, 0x100)
+	GEN_INT_ENTRY denorm_exception, virt=0
 #ifdef CONFIG_PPC_DENORMALISATION
-	mfspr	r10,SPRN_HSRR1
-	andis.	r10,r10,(HSRR1_DENORM)@h /* denorm? */
+	andis.	r10,r12,(HSRR1_DENORM)@h /* denorm? */
 	bne+	denorm_assist
 #endif
-	KVMTEST denorm_exception_hv, EXC_HV 0x1500
-	INT_SAVE_SRR_AND_JUMP denorm_common, EXC_HV, 1
-EXC_REAL_END(denorm_exception_hv, 0x1500, 0x100)
-
+	GEN_BRANCH_TO_COMMON denorm_exception, virt=0
+EXC_REAL_END(denorm_exception, 0x1500, 0x100)
 #ifdef CONFIG_PPC_DENORMALISATION
 EXC_VIRT_BEGIN(denorm_exception, 0x5500, 0x100)
-	INT_HANDLER denorm_exception, 0x1500, 0, 2, 1, EXC_HV, PACA_EXGEN, 1, 0, 0, 0, 0
-	mfspr	r10,SPRN_HSRR1
-	andis.	r10,r10,(HSRR1_DENORM)@h /* denorm? */
+	GEN_INT_ENTRY denorm_exception, virt=1
+	andis.	r10,r12,(HSRR1_DENORM)@h /* denorm? */
 	bne+	denorm_assist
-	INT_VIRT_SAVE_SRR_AND_JUMP denorm_common, EXC_HV
+	GEN_BRANCH_TO_COMMON denorm_exception, virt=1
 EXC_VIRT_END(denorm_exception, 0x5500, 0x100)
 #else
 EXC_VIRT_NONE(0x5500, 0x100)
 #endif
 
-INT_KVM_HANDLER denorm_exception_hv, 0x1500, EXC_HV, PACA_EXGEN, 0
-
 #ifdef CONFIG_PPC_DENORMALISATION
 TRAMP_REAL_BEGIN(denorm_assist)
 BEGIN_FTR_SECTION
@@ -1872,7 +2602,10 @@
 	mtspr	SPRN_HSRR0,r11
 	mtcrf	0x80,r9
 	ld	r9,PACA_EXGEN+EX_R9(r13)
-	RESTORE_PPR_PACA(PACA_EXGEN, r10)
+BEGIN_FTR_SECTION
+	ld	r10,PACA_EXGEN+EX_PPR(r13)
+	mtspr	SPRN_PPR,r10
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
 BEGIN_FTR_SECTION
 	ld	r10,PACA_EXGEN+EX_CFAR(r13)
 	mtspr	SPRN_CFAR,r10
@@ -1885,43 +2618,88 @@
 	b	.
 #endif
 
-EXC_COMMON(denorm_common, 0x1500, unknown_exception)
+EXC_COMMON_BEGIN(denorm_exception_common)
+	GEN_COMMON denorm_exception
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	unknown_exception
+	b	interrupt_return
+
+	GEN_KVM denorm_exception
 
 
 #ifdef CONFIG_CBE_RAS
+INT_DEFINE_BEGIN(cbe_maintenance)
+	IVEC=0x1600
+	IHSRR=1
+	IKVM_SKIP=1
+	IKVM_REAL=1
+INT_DEFINE_END(cbe_maintenance)
+
 EXC_REAL_BEGIN(cbe_maintenance, 0x1600, 0x100)
-	INT_HANDLER cbe_maintenance, 0x1600, ool=1, hsrr=EXC_HV, kvm=1
+	GEN_INT_ENTRY cbe_maintenance, virt=0
 EXC_REAL_END(cbe_maintenance, 0x1600, 0x100)
 EXC_VIRT_NONE(0x5600, 0x100)
-INT_KVM_HANDLER cbe_maintenance, 0x1600, EXC_HV, PACA_EXGEN, 1
-EXC_COMMON(cbe_maintenance_common, 0x1600, cbe_maintenance_exception)
+EXC_COMMON_BEGIN(cbe_maintenance_common)
+	GEN_COMMON cbe_maintenance
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	cbe_maintenance_exception
+	b	interrupt_return
+
+	GEN_KVM cbe_maintenance
+
 #else /* CONFIG_CBE_RAS */
 EXC_REAL_NONE(0x1600, 0x100)
 EXC_VIRT_NONE(0x5600, 0x100)
 #endif
 
 
+INT_DEFINE_BEGIN(altivec_assist)
+	IVEC=0x1700
+#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
+	IKVM_REAL=1
+#endif
+INT_DEFINE_END(altivec_assist)
+
 EXC_REAL_BEGIN(altivec_assist, 0x1700, 0x100)
-	INT_HANDLER altivec_assist, 0x1700, kvm=1
+	GEN_INT_ENTRY altivec_assist, virt=0
 EXC_REAL_END(altivec_assist, 0x1700, 0x100)
 EXC_VIRT_BEGIN(altivec_assist, 0x5700, 0x100)
-	INT_HANDLER altivec_assist, 0x1700, virt=1
+	GEN_INT_ENTRY altivec_assist, virt=1
 EXC_VIRT_END(altivec_assist, 0x5700, 0x100)
-INT_KVM_HANDLER altivec_assist, 0x1700, EXC_STD, PACA_EXGEN, 0
+EXC_COMMON_BEGIN(altivec_assist_common)
+	GEN_COMMON altivec_assist
+	addi	r3,r1,STACK_FRAME_OVERHEAD
 #ifdef CONFIG_ALTIVEC
-EXC_COMMON(altivec_assist_common, 0x1700, altivec_assist_exception)
+	bl	altivec_assist_exception
+	REST_NVGPRS(r1) /* instruction emulation may change GPRs */
 #else
-EXC_COMMON(altivec_assist_common, 0x1700, unknown_exception)
+	bl	unknown_exception
 #endif
+	b	interrupt_return
+
+	GEN_KVM altivec_assist
 
 
 #ifdef CONFIG_CBE_RAS
+INT_DEFINE_BEGIN(cbe_thermal)
+	IVEC=0x1800
+	IHSRR=1
+	IKVM_SKIP=1
+	IKVM_REAL=1
+INT_DEFINE_END(cbe_thermal)
+
 EXC_REAL_BEGIN(cbe_thermal, 0x1800, 0x100)
-	INT_HANDLER cbe_thermal, 0x1800, ool=1, hsrr=EXC_HV, kvm=1
+	GEN_INT_ENTRY cbe_thermal, virt=0
 EXC_REAL_END(cbe_thermal, 0x1800, 0x100)
 EXC_VIRT_NONE(0x5800, 0x100)
-INT_KVM_HANDLER cbe_thermal, 0x1800, EXC_HV, PACA_EXGEN, 1
-EXC_COMMON(cbe_thermal_common, 0x1800, cbe_thermal_exception)
+EXC_COMMON_BEGIN(cbe_thermal_common)
+	GEN_COMMON cbe_thermal
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	cbe_thermal_exception
+	b	interrupt_return
+
+	GEN_KVM cbe_thermal
+
 #else /* CONFIG_CBE_RAS */
 EXC_REAL_NONE(0x1800, 0x100)
 EXC_VIRT_NONE(0x5800, 0x100)
@@ -1930,14 +2708,11 @@
 
 #ifdef CONFIG_PPC_WATCHDOG
 
-#define MASKED_DEC_HANDLER_LABEL 3f
-
-#define MASKED_DEC_HANDLER(_H)				\
-3: /* soft-nmi */					\
-	std	r12,PACA_EXGEN+EX_R12(r13);		\
-	GET_SCRATCH0(r10);				\
-	std	r10,PACA_EXGEN+EX_R13(r13);		\
-	INT_SAVE_SRR_AND_JUMP soft_nmi_common, _H, 1
+INT_DEFINE_BEGIN(soft_nmi)
+	IVEC=0x900
+	ISTACK=0
+	IRECONCILE=0	/* Soft-NMI may fire under local_irq_disable */
+INT_DEFINE_END(soft_nmi)
 
 /*
  * Branch to soft_nmi_interrupt using the emergency stack. The emergency
@@ -1949,18 +2724,42 @@
  * and run it entirely with interrupts hard disabled.
  */
 EXC_COMMON_BEGIN(soft_nmi_common)
+	mfspr	r11,SPRN_SRR0
 	mr	r10,r1
 	ld	r1,PACAEMERGSP(r13)
 	subi	r1,r1,INT_FRAME_SIZE
-	INT_COMMON 0x900, PACA_EXGEN, 0, 1, 1, 0, 0
-	bl	save_nvgprs
+	__GEN_COMMON_BODY soft_nmi
+
+	/*
+	 * Set IRQS_ALL_DISABLED and save PACAIRQHAPPENED (see
+	 * system_reset_common)
+	 */
+	li	r10,IRQS_ALL_DISABLED
+	stb	r10,PACAIRQSOFTMASK(r13)
+	lbz	r10,PACAIRQHAPPENED(r13)
+	std	r10,_DAR(r1)
+	ori	r10,r10,PACA_IRQ_HARD_DIS
+	stb	r10,PACAIRQHAPPENED(r13)
+
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	soft_nmi_interrupt
-	b	ret_from_except
 
-#else /* CONFIG_PPC_WATCHDOG */
-#define MASKED_DEC_HANDLER_LABEL 2f /* normal return */
-#define MASKED_DEC_HANDLER(_H)
+	/* Clear MSR_RI before setting SRR0 and SRR1. */
+	li	r9,0
+	mtmsrd	r9,1
+
+	/*
+	 * Restore soft mask settings.
+	 */
+	ld	r10,_DAR(r1)
+	stb	r10,PACAIRQHAPPENED(r13)
+	ld	r10,SOFTE(r1)
+	stb	r10,PACAIRQSOFTMASK(r13)
+
+	kuap_restore_amr r10
+	EXCEPTION_RESTORE_REGS hsrr=0
+	RFI_TO_KERNEL
+
 #endif /* CONFIG_PPC_WATCHDOG */
 
 /*
@@ -1973,13 +2772,12 @@
  * - Else it is one of PACA_IRQ_MUST_HARD_MASK, so hard disable and return.
  * This is called with r10 containing the value to OR to the paca field.
  */
-.macro MASKED_INTERRUPT hsrr
+.macro MASKED_INTERRUPT hsrr=0
 	.if \hsrr
 masked_Hinterrupt:
 	.else
 masked_interrupt:
 	.endif
-	std	r11,PACA_EXGEN+EX_R11(r13)
 	lbz	r11,PACAIRQHAPPENED(r13)
 	or	r11,r11,r10
 	stb	r11,PACAIRQHAPPENED(r13)
@@ -1988,26 +2786,30 @@
 	lis	r10,0x7fff
 	ori	r10,r10,0xffff
 	mtspr	SPRN_DEC,r10
-	b	MASKED_DEC_HANDLER_LABEL
+#ifdef CONFIG_PPC_WATCHDOG
+	b	soft_nmi_common
+#else
+	b	2f
+#endif
 1:	andi.	r10,r10,PACA_IRQ_MUST_HARD_MASK
 	beq	2f
+	xori	r12,r12,MSR_EE	/* clear MSR_EE */
 	.if \hsrr
-	mfspr	r10,SPRN_HSRR1
-	xori	r10,r10,MSR_EE	/* clear MSR_EE */
-	mtspr	SPRN_HSRR1,r10
+	mtspr	SPRN_HSRR1,r12
 	.else
-	mfspr	r10,SPRN_SRR1
-	xori	r10,r10,MSR_EE	/* clear MSR_EE */
-	mtspr	SPRN_SRR1,r10
+	mtspr	SPRN_SRR1,r12
 	.endif
 	ori	r11,r11,PACA_IRQ_HARD_DIS
 	stb	r11,PACAIRQHAPPENED(r13)
 2:	/* done */
+	ld	r10,PACA_EXGEN+EX_CTR(r13)
+	mtctr	r10
 	mtcrf	0x80,r9
 	std	r1,PACAR1(r13)
 	ld	r9,PACA_EXGEN+EX_R9(r13)
 	ld	r10,PACA_EXGEN+EX_R10(r13)
 	ld	r11,PACA_EXGEN+EX_R11(r13)
+	ld	r12,PACA_EXGEN+EX_R12(r13)
 	/* returns to kernel where r13 must be set up, so don't restore it */
 	.if \hsrr
 	HRFI_TO_KERNEL
@@ -2015,7 +2817,6 @@
 	RFI_TO_KERNEL
 	.endif
 	b	.
-	MASKED_DEC_HANDLER(\hsrr\())
 .endm
 
 TRAMP_REAL_BEGIN(stf_barrier_fallback)
@@ -2117,17 +2918,12 @@
 	GET_SCRATCH0(r13);
 	hrfid
 
-/*
- * Real mode exceptions actually use this too, but alternate
- * instruction code patches (which end up in the common .text area)
- * cannot reach these if they are put there.
- */
-USE_FIXED_SECTION(virt_trampolines)
-	MASKED_INTERRUPT EXC_STD
-	MASKED_INTERRUPT EXC_HV
+USE_TEXT_SECTION()
+	MASKED_INTERRUPT
+	MASKED_INTERRUPT hsrr=1
 
 #ifdef CONFIG_KVM_BOOK3S_64_HANDLER
-TRAMP_REAL_BEGIN(kvmppc_skip_interrupt)
+kvmppc_skip_interrupt:
 	/*
 	 * Here all GPRs are unchanged from when the interrupt happened
 	 * except for r13, which is saved in SPRG_SCRATCH0.
@@ -2139,7 +2935,7 @@
 	RFI_TO_KERNEL
 	b	.
 
-TRAMP_REAL_BEGIN(kvmppc_skip_Hinterrupt)
+kvmppc_skip_Hinterrupt:
 	/*
 	 * Here all GPRs are unchanged from when the interrupt happened
 	 * except for r13, which is saved in SPRG_SCRATCH0.
@@ -2152,16 +2948,6 @@
 	b	.
 #endif
 
-/*
- * Ensure that any handlers that get invoked from the exception prologs
- * above are below the first 64KB (0x10000) of the kernel image because
- * the prologs assemble the addresses of these handlers using the
- * LOAD_HANDLER macro, which uses an ori instruction.
- */
-
-/*** Common interrupt handlers ***/
-
-
 	/*
 	 * Relocation-on interrupts: A subset of the interrupts can be delivered
 	 * with IR=1/DR=1, if AIL==2 and MSR.HV won't be changed by delivering
@@ -2275,7 +3061,7 @@
         cmpdi	r3,0			/* see if __hash_page succeeded */
 
 	/* Success */
-	beq	fast_exc_return_irq	/* Return from exception on success */
+	beq	interrupt_return	/* Return from exception on success */
 
 	/* Error */
 	blt-	13f
@@ -2292,39 +3078,36 @@
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	do_page_fault
 	cmpdi	r3,0
-	beq+	ret_from_except_lite
-	bl	save_nvgprs
+	beq+	interrupt_return
 	mr	r5,r3
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	ld	r4,_DAR(r1)
 	bl	bad_page_fault
-	b	ret_from_except
+	b	interrupt_return
 
 /* We have a data breakpoint exception - handle it */
 handle_dabr_fault:
-	bl	save_nvgprs
 	ld      r4,_DAR(r1)
 	ld      r5,_DSISR(r1)
 	addi    r3,r1,STACK_FRAME_OVERHEAD
 	bl      do_break
 	/*
 	 * do_break() may have changed the NV GPRS while handling a breakpoint.
-	 * If so, we need to restore them with their updated values. Don't use
-	 * ret_from_except_lite here.
+	 * If so, we need to restore them with their updated values.
 	 */
-	b       ret_from_except
+	REST_NVGPRS(r1)
+	b       interrupt_return
 
 
 #ifdef CONFIG_PPC_BOOK3S_64
 /* We have a page fault that hash_page could handle but HV refused
  * the PTE insertion
  */
-13:	bl	save_nvgprs
-	mr	r5,r3
+13:	mr	r5,r3
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	ld	r4,_DAR(r1)
 	bl	low_hash_fault
-	b	ret_from_except
+	b	interrupt_return
 #endif
 
 /*
@@ -2334,74 +3117,7 @@
  * were soft-disabled.  We want to invoke the exception handler for
  * the access, or panic if there isn't a handler.
  */
-77:	bl	save_nvgprs
-	addi	r3,r1,STACK_FRAME_OVERHEAD
+77:	addi	r3,r1,STACK_FRAME_OVERHEAD
 	li	r5,SIGSEGV
 	bl	bad_page_fault
-	b	ret_from_except
-
-/*
- * When doorbell is triggered from system reset wakeup, the message is
- * not cleared, so it would fire again when EE is enabled.
- *
- * When coming from local_irq_enable, there may be the same problem if
- * we were hard disabled.
- *
- * Execute msgclr to clear pending exceptions before handling it.
- */
-h_doorbell_common_msgclr:
-	LOAD_REG_IMMEDIATE(r3, PPC_DBELL_MSGTYPE << (63-36))
-	PPC_MSGCLR(3)
-	b 	h_doorbell_common
-
-doorbell_super_common_msgclr:
-	LOAD_REG_IMMEDIATE(r3, PPC_DBELL_MSGTYPE << (63-36))
-	PPC_MSGCLRP(3)
-	b 	doorbell_super_common
-
-/*
- * Called from arch_local_irq_enable when an interrupt needs
- * to be resent. r3 contains 0x500, 0x900, 0xa00 or 0xe80 to indicate
- * which kind of interrupt. MSR:EE is already off. We generate a
- * stackframe like if a real interrupt had happened.
- *
- * Note: While MSR:EE is off, we need to make sure that _MSR
- * in the generated frame has EE set to 1 or the exception
- * handler will not properly re-enable them.
- *
- * Note that we don't specify LR as the NIP (return address) for
- * the interrupt because that would unbalance the return branch
- * predictor.
- */
-_GLOBAL(__replay_interrupt)
-	/* We are going to jump to the exception common code which
-	 * will retrieve various register values from the PACA which
-	 * we don't give a damn about, so we don't bother storing them.
-	 */
-	mfmsr	r12
-	LOAD_REG_ADDR(r11, replay_interrupt_return)
-	mfcr	r9
-	ori	r12,r12,MSR_EE
-	cmpwi	r3,0x900
-	beq	decrementer_common
-	cmpwi	r3,0x500
-BEGIN_FTR_SECTION
-	beq	h_virt_irq_common
-FTR_SECTION_ELSE
-	beq	hardware_interrupt_common
-ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_300)
-	cmpwi	r3,0xf00
-	beq	performance_monitor_common
-BEGIN_FTR_SECTION
-	cmpwi	r3,0xa00
-	beq	h_doorbell_common_msgclr
-	cmpwi	r3,0xe60
-	beq	hmi_exception_common
-FTR_SECTION_ELSE
-	cmpwi	r3,0xa00
-	beq	doorbell_super_common_msgclr
-ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE)
-replay_interrupt_return:
-	blr
-
-_ASM_NOKPROBE_SYMBOL(__replay_interrupt)
+	b	interrupt_return
diff --git a/arch/powerpc/kernel/fadump.c b/arch/powerpc/kernel/fadump.c
index ff0114a..59e60a9 100644
--- a/arch/powerpc/kernel/fadump.c
+++ b/arch/powerpc/kernel/fadump.c
@@ -36,6 +36,8 @@ static struct fw_dump fw_dump;
 
 static void __init fadump_reserve_crash_area(u64 base);
 
+struct kobject *fadump_kobj;
+
 #ifndef CONFIG_PRESERVE_FA_DUMP
 static DEFINE_MUTEX(fadump_mutex);
 struct fadump_mrange_info crash_mrange_info = { "crash", NULL, 0, 0, 0 };
@@ -1323,9 +1325,9 @@ static void fadump_invalidate_release_mem(void)
 	fw_dump.ops->fadump_init_mem_struct(&fw_dump);
 }
 
-static ssize_t fadump_release_memory_store(struct kobject *kobj,
-					struct kobj_attribute *attr,
-					const char *buf, size_t count)
+static ssize_t release_mem_store(struct kobject *kobj,
+				 struct kobj_attribute *attr,
+				 const char *buf, size_t count)
 {
 	int input = -1;
 
@@ -1350,23 +1352,40 @@ static ssize_t fadump_release_memory_store(struct kobject *kobj,
 	return count;
 }
 
-static ssize_t fadump_enabled_show(struct kobject *kobj,
-					struct kobj_attribute *attr,
-					char *buf)
+/* Release the reserved memory and disable the FADump */
+static void unregister_fadump(void)
+{
+	fadump_cleanup();
+	fadump_release_memory(fw_dump.reserve_dump_area_start,
+			      fw_dump.reserve_dump_area_size);
+	fw_dump.fadump_enabled = 0;
+	kobject_put(fadump_kobj);
+}
+
+static ssize_t enabled_show(struct kobject *kobj,
+			    struct kobj_attribute *attr,
+			    char *buf)
 {
 	return sprintf(buf, "%d\n", fw_dump.fadump_enabled);
 }
 
-static ssize_t fadump_register_show(struct kobject *kobj,
-					struct kobj_attribute *attr,
-					char *buf)
+static ssize_t mem_reserved_show(struct kobject *kobj,
+				 struct kobj_attribute *attr,
+				 char *buf)
+{
+	return sprintf(buf, "%ld\n", fw_dump.reserve_dump_area_size);
+}
+
+static ssize_t registered_show(struct kobject *kobj,
+			       struct kobj_attribute *attr,
+			       char *buf)
 {
 	return sprintf(buf, "%d\n", fw_dump.dump_registered);
 }
 
-static ssize_t fadump_register_store(struct kobject *kobj,
-					struct kobj_attribute *attr,
-					const char *buf, size_t count)
+static ssize_t registered_store(struct kobject *kobj,
+				struct kobj_attribute *attr,
+				const char *buf, size_t count)
 {
 	int ret = 0;
 	int input = -1;
@@ -1418,45 +1437,82 @@ static int fadump_region_show(struct seq_file *m, void *private)
 	return 0;
 }
 
-static struct kobj_attribute fadump_release_attr = __ATTR(fadump_release_mem,
-						0200, NULL,
-						fadump_release_memory_store);
-static struct kobj_attribute fadump_attr = __ATTR(fadump_enabled,
-						0444, fadump_enabled_show,
-						NULL);
-static struct kobj_attribute fadump_register_attr = __ATTR(fadump_registered,
-						0644, fadump_register_show,
-						fadump_register_store);
+static struct kobj_attribute release_attr = __ATTR_WO(release_mem);
+static struct kobj_attribute enable_attr = __ATTR_RO(enabled);
+static struct kobj_attribute register_attr = __ATTR_RW(registered);
+static struct kobj_attribute mem_reserved_attr = __ATTR_RO(mem_reserved);
+
+static struct attribute *fadump_attrs[] = {
+	&enable_attr.attr,
+	&register_attr.attr,
+	&mem_reserved_attr.attr,
+	NULL,
+};
+
+ATTRIBUTE_GROUPS(fadump);
 
 DEFINE_SHOW_ATTRIBUTE(fadump_region);
 
 static void fadump_init_files(void)
 {
-	struct dentry *debugfs_file;
 	int rc = 0;
 
-	rc = sysfs_create_file(kernel_kobj, &fadump_attr.attr);
-	if (rc)
-		printk(KERN_ERR "fadump: unable to create sysfs file"
-			" fadump_enabled (%d)\n", rc);
+	fadump_kobj = kobject_create_and_add("fadump", kernel_kobj);
+	if (!fadump_kobj) {
+		pr_err("failed to create fadump kobject\n");
+		return;
+	}
 
-	rc = sysfs_create_file(kernel_kobj, &fadump_register_attr.attr);
-	if (rc)
-		printk(KERN_ERR "fadump: unable to create sysfs file"
-			" fadump_registered (%d)\n", rc);
-
-	debugfs_file = debugfs_create_file("fadump_region", 0444,
-					powerpc_debugfs_root, NULL,
-					&fadump_region_fops);
-	if (!debugfs_file)
-		printk(KERN_ERR "fadump: unable to create debugfs file"
-				" fadump_region\n");
+	debugfs_create_file("fadump_region", 0444, powerpc_debugfs_root, NULL,
+			    &fadump_region_fops);
 
 	if (fw_dump.dump_active) {
-		rc = sysfs_create_file(kernel_kobj, &fadump_release_attr.attr);
+		rc = sysfs_create_file(fadump_kobj, &release_attr.attr);
 		if (rc)
-			printk(KERN_ERR "fadump: unable to create sysfs file"
-				" fadump_release_mem (%d)\n", rc);
+			pr_err("unable to create release_mem sysfs file (%d)\n",
+			       rc);
+	}
+
+	rc = sysfs_create_groups(fadump_kobj, fadump_groups);
+	if (rc) {
+		pr_err("sysfs group creation failed (%d), unregistering FADump",
+		       rc);
+		unregister_fadump();
+		return;
+	}
+
+	/*
+	 * The FADump sysfs are moved from kernel_kobj to fadump_kobj need to
+	 * create symlink at old location to maintain backward compatibility.
+	 *
+	 *      - fadump_enabled -> fadump/enabled
+	 *      - fadump_registered -> fadump/registered
+	 *      - fadump_release_mem -> fadump/release_mem
+	 */
+	rc = compat_only_sysfs_link_entry_to_kobj(kernel_kobj, fadump_kobj,
+						  "enabled", "fadump_enabled");
+	if (rc) {
+		pr_err("unable to create fadump_enabled symlink (%d)", rc);
+		return;
+	}
+
+	rc = compat_only_sysfs_link_entry_to_kobj(kernel_kobj, fadump_kobj,
+						  "registered",
+						  "fadump_registered");
+	if (rc) {
+		pr_err("unable to create fadump_registered symlink (%d)", rc);
+		sysfs_remove_link(kernel_kobj, "fadump_enabled");
+		return;
+	}
+
+	if (fw_dump.dump_active) {
+		rc = compat_only_sysfs_link_entry_to_kobj(kernel_kobj,
+							  fadump_kobj,
+							  "release_mem",
+							  "fadump_release_mem");
+		if (rc)
+			pr_err("unable to create fadump_release_mem symlink (%d)",
+			       rc);
 	}
 	return;
 }
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index 97c8879..daaa153 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -348,7 +348,7 @@
 	andis.	r0, r5, (DSISR_BAD_FAULT_32S | DSISR_DABRMATCH)@h
 #endif
 	bne	handle_page_fault_tramp_2	/* if not, try to put a PTE */
-	rlwinm	r3, r5, 32 - 15, 21, 21		/* DSISR_STORE -> _PAGE_RW */
+	rlwinm	r3, r5, 32 - 24, 30, 30		/* DSISR_STORE -> _PAGE_RW */
 	bl	hash_page
 	b	handle_page_fault_tramp_1
 FTR_SECTION_ELSE
@@ -497,7 +497,6 @@
 	andc.	r1,r1,r0		/* check access & ~permission */
 	bne-	InstructionAddressInvalid /* return if access not permitted */
 	/* Convert linux-style PTE to low word of PPC-style PTE */
-	rlwimi	r0,r0,32-2,31,31	/* _PAGE_USER -> PP lsb */
 	ori	r1, r1, 0xe06		/* clear out reserved bits */
 	andc	r1, r0, r1		/* PP = user? 1 : 0 */
 BEGIN_FTR_SECTION
@@ -565,9 +564,8 @@
 	 * we would need to update the pte atomically with lwarx/stwcx.
 	 */
 	/* Convert linux-style PTE to low word of PPC-style PTE */
-	rlwinm	r1,r0,32-9,30,30	/* _PAGE_RW -> PP msb */
-	rlwimi	r0,r0,32-1,30,30	/* _PAGE_USER -> PP msb */
-	rlwimi	r0,r0,32-1,31,31	/* _PAGE_USER -> PP lsb */
+	rlwinm	r1,r0,0,30,30		/* _PAGE_RW -> PP msb */
+	rlwimi	r0,r0,1,30,30		/* _PAGE_USER -> PP msb */
 	ori	r1,r1,0xe04		/* clear out reserved bits */
 	andc	r1,r0,r1		/* PP = user? rw? 1: 3: 0 */
 BEGIN_FTR_SECTION
@@ -645,7 +643,6 @@
 	 * we would need to update the pte atomically with lwarx/stwcx.
 	 */
 	/* Convert linux-style PTE to low word of PPC-style PTE */
-	rlwimi	r0,r0,32-2,31,31	/* _PAGE_USER -> PP lsb */
 	li	r1,0xe06		/* clear out reserved bits & PP msb */
 	andc	r1,r0,r1		/* PP = user? 1: 0 */
 BEGIN_FTR_SECTION
diff --git a/arch/powerpc/kernel/head_32.h b/arch/powerpc/kernel/head_32.h
index 9db162f..9abec6c 100644
--- a/arch/powerpc/kernel/head_32.h
+++ b/arch/powerpc/kernel/head_32.h
@@ -130,37 +130,36 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_HPTE_TABLE)
 
 .macro SYSCALL_ENTRY trapno
 	mfspr	r12,SPRN_SPRG_THREAD
+	mfspr	r9, SPRN_SRR1
 #ifdef CONFIG_VMAP_STACK
-	mfspr	r9, SPRN_SRR0
-	mfspr	r11, SPRN_SRR1
-	stw	r9, SRR0(r12)
-	stw	r11, SRR1(r12)
+	mfspr	r11, SPRN_SRR0
+	mtctr	r11
 #endif
-	mfcr	r10
+	andi.	r11, r9, MSR_PR
 	lwz	r11,TASK_STACK-THREAD(r12)
-	rlwinm	r10,r10,0,4,2	/* Clear SO bit in CR */
+	beq-	99f
 	addi	r11, r11, THREAD_SIZE - INT_FRAME_SIZE
 #ifdef CONFIG_VMAP_STACK
-	li	r9, MSR_KERNEL & ~(MSR_IR | MSR_RI) /* can take DTLB miss */
-	mtmsr	r9
+	li	r10, MSR_KERNEL & ~(MSR_IR | MSR_RI) /* can take DTLB miss */
+	mtmsr	r10
 	isync
 #endif
 	tovirt_vmstack r12, r12
 	tophys_novmstack r11, r11
-	mflr	r9
-	stw	r10,_CCR(r11)		/* save registers */
-	stw	r9, _LINK(r11)
+	mflr	r10
+	stw	r10, _LINK(r11)
 #ifdef CONFIG_VMAP_STACK
-	lwz	r10, SRR0(r12)
-	lwz	r9, SRR1(r12)
+	mfctr	r10
 #else
 	mfspr	r10,SPRN_SRR0
-	mfspr	r9,SPRN_SRR1
 #endif
 	stw	r1,GPR1(r11)
 	stw	r1,0(r11)
 	tovirt_novmstack r1, r11	/* set new kernel sp */
 	stw	r10,_NIP(r11)
+	mfcr	r10
+	rlwinm	r10,r10,0,4,2	/* Clear SO bit in CR */
+	stw	r10,_CCR(r11)		/* save registers */
 #ifdef CONFIG_40x
 	rlwinm	r9,r9,0,14,12		/* clear MSR_WE (necessary?) */
 #else
@@ -228,6 +227,7 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_HPTE_TABLE)
 	mtspr	SPRN_SRR0,r11
 	SYNC
 	RFI				/* jump to handler, enable MMU */
+99:	b	ret_from_kernel_syscall
 .endm
 
 .macro save_dar_dsisr_on_stack reg1, reg2, sp
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index ad79fdd..ddfbd02 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -537,6 +537,7 @@
 	b	__after_prom_start
 #endif /* CONFIG_PPC_BOOK3E */
 
+__REF
 __boot_from_prom:
 #ifdef CONFIG_PPC_OF_BOOT_TRAMPOLINE
 	/* Save parameters */
@@ -574,6 +575,7 @@
 	/* We never return. We also hit that trap if trying to boot
 	 * from OF while CONFIG_PPC_OF_BOOT_TRAMPOLINE isn't selected */
 	trap
+	.previous
 
 __after_prom_start:
 #ifdef CONFIG_RELOCATABLE
@@ -977,7 +979,6 @@
 	RFI
 	b	.	/* prevent speculative execution */
 
-	.previous
 	/* This is where all platforms converge execution */
 
 start_here_common:
@@ -1001,6 +1002,7 @@
 	/* Not reached */
 	trap
 	EMIT_BUG_ENTRY 0b, __FILE__, __LINE__, 0
+	.previous
 
 /*
  * We put a few things here that have to be page-aligned.
diff --git a/arch/powerpc/kernel/head_booke.h b/arch/powerpc/kernel/head_booke.h
index 37fc84e..bd2e5ed 100644
--- a/arch/powerpc/kernel/head_booke.h
+++ b/arch/powerpc/kernel/head_booke.h
@@ -104,16 +104,18 @@ FTR_SECTION_ELSE
 #ifdef CONFIG_KVM_BOOKE_HV
 ALT_FTR_SECTION_END_IFSET(CPU_FTR_EMB_HV)
 #endif
+	mfspr	r9, SPRN_SRR1
 	BOOKE_CLEAR_BTB(r11)
+	andi.	r11, r9, MSR_PR
 	lwz	r11, TASK_STACK - THREAD(r10)
 	rlwinm	r12,r12,0,4,2	/* Clear SO bit in CR */
+	beq-	99f
 	ALLOC_STACK_FRAME(r11, THREAD_SIZE - INT_FRAME_SIZE)
 	stw	r12, _CCR(r11)		/* save various registers */
 	mflr	r12
 	stw	r12,_LINK(r11)
 	mfspr	r12,SPRN_SRR0
 	stw	r1, GPR1(r11)
-	mfspr	r9,SPRN_SRR1
 	stw	r1, 0(r11)
 	mr	r1, r11
 	stw	r12,_NIP(r11)
@@ -176,6 +178,7 @@ ALT_FTR_SECTION_END_IFSET(CPU_FTR_EMB_HV)
 	mtspr	SPRN_SRR0,r11
 	SYNC
 	RFI				/* jump to handler, enable MMU */
+99:	b	ret_from_kernel_syscall
 .endm
 
 /* To handle the additional exception priority levels on 40x and Book-E
diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c
index d085432..72f461b 100644
--- a/arch/powerpc/kernel/hw_breakpoint.c
+++ b/arch/powerpc/kernel/hw_breakpoint.c
@@ -429,3 +429,19 @@ void hw_breakpoint_pmu_read(struct perf_event *bp)
 {
 	/* TODO */
 }
+
+void ptrace_triggered(struct perf_event *bp,
+		      struct perf_sample_data *data, struct pt_regs *regs)
+{
+	struct perf_event_attr attr;
+
+	/*
+	 * Disable the breakpoint request here since ptrace has defined a
+	 * one-shot behaviour for breakpoint exceptions in PPC64.
+	 * The SIGTRAP signal is generated automatically for us in do_dabr().
+	 * We don't have to do anything about that here
+	 */
+	attr = bp->attr;
+	attr.disabled = true;
+	modify_user_hw_breakpoint(bp, &attr);
+}
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 5c9b118..1f11698 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -70,6 +70,7 @@
 #include <asm/paca.h>
 #include <asm/firmware.h>
 #include <asm/lv1call.h>
+#include <asm/dbell.h>
 #endif
 #define CREATE_TRACE_POINTS
 #include <asm/trace.h>
@@ -109,6 +110,8 @@ static inline notrace int decrementer_check_overflow(void)
 	return now >= *next_tb;
 }
 
+#ifdef CONFIG_PPC_BOOK3E
+
 /* This is called whenever we are re-enabling interrupts
  * and returns either 0 (nothing to do) or 500/900/280/a00/e80 if
  * there's an EE, DEC or DBELL to generate.
@@ -168,41 +171,16 @@ notrace unsigned int __check_irq_replay(void)
 		}
 	}
 
-	/*
-	 * Force the delivery of pending soft-disabled interrupts on PS3.
-	 * Any HV call will have this side effect.
-	 */
-	if (firmware_has_feature(FW_FEATURE_PS3_LV1)) {
-		u64 tmp, tmp2;
-		lv1_get_version_info(&tmp, &tmp2);
-	}
-
-	/*
-	 * Check if an hypervisor Maintenance interrupt happened.
-	 * This is a higher priority interrupt than the others, so
-	 * replay it first.
-	 */
-	if (happened & PACA_IRQ_HMI) {
-		local_paca->irq_happened &= ~PACA_IRQ_HMI;
-		return 0xe60;
-	}
-
 	if (happened & PACA_IRQ_DEC) {
 		local_paca->irq_happened &= ~PACA_IRQ_DEC;
 		return 0x900;
 	}
 
-	if (happened & PACA_IRQ_PMI) {
-		local_paca->irq_happened &= ~PACA_IRQ_PMI;
-		return 0xf00;
-	}
-
 	if (happened & PACA_IRQ_EE) {
 		local_paca->irq_happened &= ~PACA_IRQ_EE;
 		return 0x500;
 	}
 
-#ifdef CONFIG_PPC_BOOK3E
 	/*
 	 * Check if an EPR external interrupt happened this bit is typically
 	 * set if we need to handle another "edge" interrupt from within the
@@ -217,23 +195,129 @@ notrace unsigned int __check_irq_replay(void)
 		local_paca->irq_happened &= ~PACA_IRQ_DBELL;
 		return 0x280;
 	}
-#else
-	if (happened & PACA_IRQ_DBELL) {
-		local_paca->irq_happened &= ~PACA_IRQ_DBELL;
-		return 0xa00;
-	}
-#endif /* CONFIG_PPC_BOOK3E */
 
 	/* There should be nothing left ! */
 	BUG_ON(local_paca->irq_happened != 0);
 
 	return 0;
 }
+#endif /* CONFIG_PPC_BOOK3E */
+
+void replay_soft_interrupts(void)
+{
+	/*
+	 * We use local_paca rather than get_paca() to avoid all
+	 * the debug_smp_processor_id() business in this low level
+	 * function
+	 */
+	unsigned char happened = local_paca->irq_happened;
+	struct pt_regs regs;
+
+	ppc_save_regs(&regs);
+	regs.softe = IRQS_ALL_DISABLED;
+
+again:
+	if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG))
+		WARN_ON_ONCE(mfmsr() & MSR_EE);
+
+	if (happened & PACA_IRQ_HARD_DIS) {
+		/*
+		 * We may have missed a decrementer interrupt if hard disabled.
+		 * Check the decrementer register in case we had a rollover
+		 * while hard disabled.
+		 */
+		if (!(happened & PACA_IRQ_DEC)) {
+			if (decrementer_check_overflow())
+				happened |= PACA_IRQ_DEC;
+		}
+	}
+
+	/*
+	 * Force the delivery of pending soft-disabled interrupts on PS3.
+	 * Any HV call will have this side effect.
+	 */
+	if (firmware_has_feature(FW_FEATURE_PS3_LV1)) {
+		u64 tmp, tmp2;
+		lv1_get_version_info(&tmp, &tmp2);
+	}
+
+	/*
+	 * Check if an hypervisor Maintenance interrupt happened.
+	 * This is a higher priority interrupt than the others, so
+	 * replay it first.
+	 */
+	if (IS_ENABLED(CONFIG_PPC_BOOK3S) && (happened & PACA_IRQ_HMI)) {
+		local_paca->irq_happened &= ~PACA_IRQ_HMI;
+		regs.trap = 0xe60;
+		handle_hmi_exception(&regs);
+		if (!(local_paca->irq_happened & PACA_IRQ_HARD_DIS))
+			hard_irq_disable();
+	}
+
+	if (happened & PACA_IRQ_DEC) {
+		local_paca->irq_happened &= ~PACA_IRQ_DEC;
+		regs.trap = 0x900;
+		timer_interrupt(&regs);
+		if (!(local_paca->irq_happened & PACA_IRQ_HARD_DIS))
+			hard_irq_disable();
+	}
+
+	if (happened & PACA_IRQ_EE) {
+		local_paca->irq_happened &= ~PACA_IRQ_EE;
+		regs.trap = 0x500;
+		do_IRQ(&regs);
+		if (!(local_paca->irq_happened & PACA_IRQ_HARD_DIS))
+			hard_irq_disable();
+	}
+
+	/*
+	 * Check if an EPR external interrupt happened this bit is typically
+	 * set if we need to handle another "edge" interrupt from within the
+	 * MPIC "EPR" handler.
+	 */
+	if (IS_ENABLED(CONFIG_PPC_BOOK3E) && (happened & PACA_IRQ_EE_EDGE)) {
+		local_paca->irq_happened &= ~PACA_IRQ_EE_EDGE;
+		regs.trap = 0x500;
+		do_IRQ(&regs);
+		if (!(local_paca->irq_happened & PACA_IRQ_HARD_DIS))
+			hard_irq_disable();
+	}
+
+	if (IS_ENABLED(CONFIG_PPC_DOORBELL) && (happened & PACA_IRQ_DBELL)) {
+		local_paca->irq_happened &= ~PACA_IRQ_DBELL;
+		if (IS_ENABLED(CONFIG_PPC_BOOK3E))
+			regs.trap = 0x280;
+		else
+			regs.trap = 0xa00;
+		doorbell_exception(&regs);
+		if (!(local_paca->irq_happened & PACA_IRQ_HARD_DIS))
+			hard_irq_disable();
+	}
+
+	/* Book3E does not support soft-masking PMI interrupts */
+	if (IS_ENABLED(CONFIG_PPC_BOOK3S) && (happened & PACA_IRQ_PMI)) {
+		local_paca->irq_happened &= ~PACA_IRQ_PMI;
+		regs.trap = 0xf00;
+		performance_monitor_exception(&regs);
+		if (!(local_paca->irq_happened & PACA_IRQ_HARD_DIS))
+			hard_irq_disable();
+	}
+
+	happened = local_paca->irq_happened;
+	if (happened & ~PACA_IRQ_HARD_DIS) {
+		/*
+		 * We are responding to the next interrupt, so interrupt-off
+		 * latencies should be reset here.
+		 */
+		trace_hardirqs_on();
+		trace_hardirqs_off();
+		goto again;
+	}
+}
 
 notrace void arch_local_irq_restore(unsigned long mask)
 {
 	unsigned char irq_happened;
-	unsigned int replay;
 
 	/* Write the new soft-enabled value */
 	irq_soft_mask_set(mask);
@@ -255,24 +339,16 @@ notrace void arch_local_irq_restore(unsigned long mask)
 	 */
 	irq_happened = get_irq_happened();
 	if (!irq_happened) {
-#ifdef CONFIG_PPC_IRQ_SOFT_MASK_DEBUG
-		WARN_ON_ONCE(!(mfmsr() & MSR_EE));
-#endif
+		if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG))
+			WARN_ON_ONCE(!(mfmsr() & MSR_EE));
 		return;
 	}
 
-	/*
-	 * We need to hard disable to get a trusted value from
-	 * __check_irq_replay(). We also need to soft-disable
-	 * again to avoid warnings in there due to the use of
-	 * per-cpu variables.
-	 */
+	/* We need to hard disable to replay. */
 	if (!(irq_happened & PACA_IRQ_HARD_DIS)) {
-#ifdef CONFIG_PPC_IRQ_SOFT_MASK_DEBUG
-		WARN_ON_ONCE(!(mfmsr() & MSR_EE));
-#endif
+		if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG))
+			WARN_ON_ONCE(!(mfmsr() & MSR_EE));
 		__hard_irq_disable();
-#ifdef CONFIG_PPC_IRQ_SOFT_MASK_DEBUG
 	} else {
 		/*
 		 * We should already be hard disabled here. We had bugs
@@ -280,35 +356,26 @@ notrace void arch_local_irq_restore(unsigned long mask)
 		 * warn if we are wrong. Only do that when IRQ tracing
 		 * is enabled as mfmsr() can be costly.
 		 */
-		if (WARN_ON_ONCE(mfmsr() & MSR_EE))
-			__hard_irq_disable();
-#endif
+		if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG)) {
+			if (WARN_ON_ONCE(mfmsr() & MSR_EE))
+				__hard_irq_disable();
+		}
+
+		if (irq_happened == PACA_IRQ_HARD_DIS) {
+			local_paca->irq_happened = 0;
+			__hard_irq_enable();
+			return;
+		}
 	}
 
 	irq_soft_mask_set(IRQS_ALL_DISABLED);
 	trace_hardirqs_off();
 
-	/*
-	 * Check if anything needs to be re-emitted. We haven't
-	 * soft-enabled yet to avoid warnings in decrementer_check_overflow
-	 * accessing per-cpu variables
-	 */
-	replay = __check_irq_replay();
+	replay_soft_interrupts();
+	local_paca->irq_happened = 0;
 
-	/* We can soft-enable now */
 	trace_hardirqs_on();
 	irq_soft_mask_set(IRQS_ENABLED);
-
-	/*
-	 * And replay if we have to. This will return with interrupts
-	 * hard-enabled.
-	 */
-	if (replay) {
-		__replay_interrupt(replay);
-		return;
-	}
-
-	/* Finally, let's ensure we are hard enabled */
 	__hard_irq_enable();
 }
 EXPORT_SYMBOL(arch_local_irq_restore);
@@ -460,6 +527,19 @@ void irq_set_pending_from_srr1(unsigned long srr1)
 		return;
 	}
 
+	if (reason == PACA_IRQ_DBELL) {
+		/*
+		 * When doorbell triggers a system reset wakeup, the message
+		 * is not cleared, so if the doorbell interrupt is replayed
+		 * and the IPI handled, the doorbell interrupt would still
+		 * fire when EE is enabled.
+		 *
+		 * To avoid taking the superfluous doorbell interrupt,
+		 * execute a msgclr here before the interrupt is replayed.
+		 */
+		ppc_msgclr(PPC_DBELL_MSGTYPE);
+	}
+
 	/*
 	 * The 0 index (SRR1[42:45]=b0000) must always evaluate to 0,
 	 * so this can be called unconditionally with the SRR1 wake
@@ -599,17 +679,18 @@ u64 arch_irq_stat_cpu(unsigned int cpu)
 
 static inline void check_stack_overflow(void)
 {
-#ifdef CONFIG_DEBUG_STACKOVERFLOW
 	long sp;
 
-	sp = current_stack_pointer() & (THREAD_SIZE-1);
+	if (!IS_ENABLED(CONFIG_DEBUG_STACKOVERFLOW))
+		return;
+
+	sp = current_stack_pointer & (THREAD_SIZE - 1);
 
 	/* check for stack overflow: is there less than 2KB free? */
 	if (unlikely(sp < 2048)) {
 		pr_err("do_IRQ: stack overflow: %ld\n", sp);
 		dump_stack();
 	}
-#endif
 }
 
 void __do_irq(struct pt_regs *regs)
@@ -647,7 +728,7 @@ void do_IRQ(struct pt_regs *regs)
 	void *cursp, *irqsp, *sirqsp;
 
 	/* Switch to the irq stack to handle this */
-	cursp = (void *)(current_stack_pointer() & ~(THREAD_SIZE - 1));
+	cursp = (void *)(current_stack_pointer & ~(THREAD_SIZE - 1));
 	irqsp = hardirq_ctx[raw_smp_processor_id()];
 	sirqsp = softirq_ctx[raw_smp_processor_id()];
 
diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c
index 2d27ec4..81efb60 100644
--- a/arch/powerpc/kernel/kprobes.c
+++ b/arch/powerpc/kernel/kprobes.c
@@ -264,6 +264,9 @@ int kprobe_handler(struct pt_regs *regs)
 	if (user_mode(regs))
 		return 0;
 
+	if (!(regs->msr & MSR_IR) || !(regs->msr & MSR_DR))
+		return 0;
+
 	/*
 	 * We don't want to be preempted for the entire
 	 * duration of kprobe processing
@@ -271,54 +274,6 @@ int kprobe_handler(struct pt_regs *regs)
 	preempt_disable();
 	kcb = get_kprobe_ctlblk();
 
-	/* Check we're not actually recursing */
-	if (kprobe_running()) {
-		p = get_kprobe(addr);
-		if (p) {
-			kprobe_opcode_t insn = *p->ainsn.insn;
-			if (kcb->kprobe_status == KPROBE_HIT_SS &&
-					is_trap(insn)) {
-				/* Turn off 'trace' bits */
-				regs->msr &= ~MSR_SINGLESTEP;
-				regs->msr |= kcb->kprobe_saved_msr;
-				goto no_kprobe;
-			}
-			/* We have reentered the kprobe_handler(), since
-			 * another probe was hit while within the handler.
-			 * We here save the original kprobes variables and
-			 * just single step on the instruction of the new probe
-			 * without calling any user handlers.
-			 */
-			save_previous_kprobe(kcb);
-			set_current_kprobe(p, regs, kcb);
-			kprobes_inc_nmissed_count(p);
-			kcb->kprobe_status = KPROBE_REENTER;
-			if (p->ainsn.boostable >= 0) {
-				ret = try_to_emulate(p, regs);
-
-				if (ret > 0) {
-					restore_previous_kprobe(kcb);
-					preempt_enable_no_resched();
-					return 1;
-				}
-			}
-			prepare_singlestep(p, regs);
-			return 1;
-		} else if (*addr != BREAKPOINT_INSTRUCTION) {
-			/* If trap variant, then it belongs not to us */
-			kprobe_opcode_t cur_insn = *addr;
-
-			if (is_trap(cur_insn))
-				goto no_kprobe;
-			/* The breakpoint instruction was removed by
-			 * another cpu right after we hit, no further
-			 * handling of this interrupt is appropriate
-			 */
-			ret = 1;
-		}
-		goto no_kprobe;
-	}
-
 	p = get_kprobe(addr);
 	if (!p) {
 		if (*addr != BREAKPOINT_INSTRUCTION) {
@@ -343,6 +298,39 @@ int kprobe_handler(struct pt_regs *regs)
 		goto no_kprobe;
 	}
 
+	/* Check we're not actually recursing */
+	if (kprobe_running()) {
+		kprobe_opcode_t insn = *p->ainsn.insn;
+		if (kcb->kprobe_status == KPROBE_HIT_SS && is_trap(insn)) {
+			/* Turn off 'trace' bits */
+			regs->msr &= ~MSR_SINGLESTEP;
+			regs->msr |= kcb->kprobe_saved_msr;
+			goto no_kprobe;
+		}
+
+		/*
+		 * We have reentered the kprobe_handler(), since another probe
+		 * was hit while within the handler. We here save the original
+		 * kprobes variables and just single step on the instruction of
+		 * the new probe without calling any user handlers.
+		 */
+		save_previous_kprobe(kcb);
+		set_current_kprobe(p, regs, kcb);
+		kprobes_inc_nmissed_count(p);
+		kcb->kprobe_status = KPROBE_REENTER;
+		if (p->ainsn.boostable >= 0) {
+			ret = try_to_emulate(p, regs);
+
+			if (ret > 0) {
+				restore_previous_kprobe(kcb);
+				preempt_enable_no_resched();
+				return 1;
+			}
+		}
+		prepare_singlestep(p, regs);
+		return 1;
+	}
+
 	kcb->kprobe_status = KPROBE_HIT_ACTIVE;
 	set_current_kprobe(p, regs, kcb);
 	if (p->pre_handler && p->pre_handler(p, regs)) {
diff --git a/arch/powerpc/kernel/mce.c b/arch/powerpc/kernel/mce.c
index 34c1001..8077b5f 100644
--- a/arch/powerpc/kernel/mce.c
+++ b/arch/powerpc/kernel/mce.c
@@ -15,6 +15,7 @@
 #include <linux/percpu.h>
 #include <linux/export.h>
 #include <linux/irq_work.h>
+#include <linux/extable.h>
 
 #include <asm/machdep.h>
 #include <asm/mce.h>
@@ -251,6 +252,19 @@ void machine_check_queue_event(void)
 	/* Queue irq work to process this event later. */
 	irq_work_queue(&mce_event_process_work);
 }
+
+void mce_common_process_ue(struct pt_regs *regs,
+			   struct mce_error_info *mce_err)
+{
+	const struct exception_table_entry *entry;
+
+	entry = search_kernel_exception_table(regs->nip);
+	if (entry) {
+		mce_err->ignore_event = true;
+		regs->nip = extable_fixup(entry);
+	}
+}
+
 /*
  * process pending MCE event from the mce event queue. This function will be
  * called during syscall exit.
diff --git a/arch/powerpc/kernel/mce_power.c b/arch/powerpc/kernel/mce_power.c
index 1cbf7f1..067b094 100644
--- a/arch/powerpc/kernel/mce_power.c
+++ b/arch/powerpc/kernel/mce_power.c
@@ -579,14 +579,10 @@ static long mce_handle_ue_error(struct pt_regs *regs,
 				struct mce_error_info *mce_err)
 {
 	long handled = 0;
-	const struct exception_table_entry *entry;
 
-	entry = search_kernel_exception_table(regs->nip);
-	if (entry) {
-		mce_err->ignore_event = true;
-		regs->nip = extable_fixup(entry);
+	mce_common_process_ue(regs, mce_err);
+	if (mce_err->ignore_event)
 		return 1;
-	}
 
 	/*
 	 * On specific SCOM read via MMIO we may get a machine check
diff --git a/arch/powerpc/kernel/misc.S b/arch/powerpc/kernel/misc.S
index 974f65f..65f9f73 100644
--- a/arch/powerpc/kernel/misc.S
+++ b/arch/powerpc/kernel/misc.S
@@ -110,7 +110,7 @@
 	li	r3, 1
 	blr
 
-_GLOBAL(current_stack_pointer)
+_GLOBAL(current_stack_frame)
 	PPC_LL	r3,0(r1)
 	blr
-EXPORT_SYMBOL(current_stack_pointer)
+EXPORT_SYMBOL(current_stack_frame)
diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c
index 427fc22..71a3f97 100644
--- a/arch/powerpc/kernel/of_platform.c
+++ b/arch/powerpc/kernel/of_platform.c
@@ -62,13 +62,9 @@ static int of_pci_phb_probe(struct platform_device *dev)
 	/* Init pci_dn data structures */
 	pci_devs_phb_init_dynamic(phb);
 
-	/* Create EEH devices for the PHB */
+	/* Create EEH PEs for the PHB */
 	eeh_dev_phb_init_dynamic(phb);
 
-	/* Register devices with EEH */
-	if (dev->dev.of_node->child)
-		eeh_add_device_tree_early(PCI_DN(dev->dev.of_node));
-
 	/* Scan the bus */
 	pcibios_scan_phb(phb);
 	if (phb->bus == NULL)
@@ -80,15 +76,9 @@ static int of_pci_phb_probe(struct platform_device *dev)
 	 */
 	pcibios_claim_one_bus(phb->bus);
 
-	/* Finish EEH setup */
-	eeh_add_device_tree_late(phb->bus);
-
 	/* Add probed PCI devices to the device model */
 	pci_bus_add_devices(phb->bus);
 
-	/* sysfs files should only be added after devices are added */
-	eeh_add_sysfs_files(phb->bus);
-
 	return 0;
 }
 
diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c
index 949eceb..3f91cca 100644
--- a/arch/powerpc/kernel/paca.c
+++ b/arch/powerpc/kernel/paca.c
@@ -176,7 +176,7 @@ static struct slb_shadow * __init new_slb_shadow(int cpu, unsigned long limit)
 struct paca_struct **paca_ptrs __read_mostly;
 EXPORT_SYMBOL(paca_ptrs);
 
-void __init initialise_paca(struct paca_struct *new_paca, int cpu)
+void __init __nostackprotector initialise_paca(struct paca_struct *new_paca, int cpu)
 {
 #ifdef CONFIG_PPC_PSERIES
 	new_paca->lppaca_ptr = NULL;
@@ -205,7 +205,7 @@ void __init initialise_paca(struct paca_struct *new_paca, int cpu)
 }
 
 /* Put the paca pointer into r13 and SPRG_PACA */
-void setup_paca(struct paca_struct *new_paca)
+void __nostackprotector setup_paca(struct paca_struct *new_paca)
 {
 	/* Setup r13 */
 	local_paca = new_paca;
@@ -214,11 +214,15 @@ void setup_paca(struct paca_struct *new_paca)
 	/* On Book3E, initialize the TLB miss exception frames */
 	mtspr(SPRN_SPRG_TLB_EXFRAME, local_paca->extlb);
 #else
-	/* In HV mode, we setup both HPACA and PACA to avoid problems
+	/*
+	 * In HV mode, we setup both HPACA and PACA to avoid problems
 	 * if we do a GET_PACA() before the feature fixups have been
-	 * applied
+	 * applied.
+	 *
+	 * Normally you should test against CPU_FTR_HVMODE, but CPU features
+	 * are not yet set up when we first reach here.
 	 */
-	if (early_cpu_has_feature(CPU_FTR_HVMODE))
+	if (mfmsr() & MSR_HV)
 		mtspr(SPRN_SPRG_HPACA, local_paca);
 #endif
 	mtspr(SPRN_SPRG_PACA, local_paca);
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index c6c0341..be10861 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -728,7 +728,7 @@ void pci_process_bridge_OF_ranges(struct pci_controller *hose,
 			       " MEM 0x%016llx..0x%016llx -> 0x%016llx %s\n",
 			       range.cpu_addr, range.cpu_addr + range.size - 1,
 			       range.pci_addr,
-			       (range.pci_space & 0x40000000) ?
+			       (range.flags & IORESOURCE_PREFETCH) ?
 			       "Prefetch" : "");
 
 			/* We support only 3 memory ranges */
@@ -1399,14 +1399,8 @@ void pcibios_finish_adding_to_bus(struct pci_bus *bus)
 			pci_assign_unassigned_bus_resources(bus);
 	}
 
-	/* Fixup EEH */
-	eeh_add_device_tree_late(bus);
-
 	/* Add new devices to global lists.  Register in proc, sysfs. */
 	pci_bus_add_devices(bus);
-
-	/* sysfs files should only be added after devices are added */
-	eeh_add_sysfs_files(bus);
 }
 EXPORT_SYMBOL_GPL(pcibios_finish_adding_to_bus);
 
diff --git a/arch/powerpc/kernel/pci-hotplug.c b/arch/powerpc/kernel/pci-hotplug.c
index d6a67f8..bf83f76 100644
--- a/arch/powerpc/kernel/pci-hotplug.c
+++ b/arch/powerpc/kernel/pci-hotplug.c
@@ -112,8 +112,6 @@ void pci_hp_add_devices(struct pci_bus *bus)
 	struct pci_controller *phb;
 	struct device_node *dn = pci_bus_to_OF_node(bus);
 
-	eeh_add_device_tree_early(PCI_DN(dn));
-
 	phb = pci_bus_to_host(bus);
 
 	mode = PCI_PROBE_NORMAL;
diff --git a/arch/powerpc/kernel/ppc_save_regs.S b/arch/powerpc/kernel/ppc_save_regs.S
index f3bd0bb..2d4d21b 100644
--- a/arch/powerpc/kernel/ppc_save_regs.S
+++ b/arch/powerpc/kernel/ppc_save_regs.S
@@ -55,14 +55,17 @@
 	PPC_STL	r29,29*SZL(r3)
 	PPC_STL	r30,30*SZL(r3)
 	PPC_STL	r31,31*SZL(r3)
+	lbz	r0,PACAIRQSOFTMASK(r13)
+	PPC_STL	r0,SOFTE-STACK_FRAME_OVERHEAD(r3)
 #endif
 	/* go up one stack frame for SP */
 	PPC_LL	r4,0(r1)
 	PPC_STL	r4,1*SZL(r3)
 	/* get caller's LR */
 	PPC_LL	r0,LRSAVE(r4)
-	PPC_STL	r0,_NIP-STACK_FRAME_OVERHEAD(r3)
 	PPC_STL	r0,_LINK-STACK_FRAME_OVERHEAD(r3)
+	mflr	r0
+	PPC_STL	r0,_NIP-STACK_FRAME_OVERHEAD(r3)
 	mfmsr	r0
 	PPC_STL	r0,_MSR-STACK_FRAME_OVERHEAD(r3)
 	mfctr	r0
@@ -73,4 +76,5 @@
 	PPC_STL	r0,_CCR-STACK_FRAME_OVERHEAD(r3)
 	li	r0,0
 	PPC_STL	r0,_TRAP-STACK_FRAME_OVERHEAD(r3)
+	PPC_STL	r0,ORIG_GPR3-STACK_FRAME_OVERHEAD(r3)
 	blr
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index fad50db..9c21288 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -236,23 +236,9 @@ void enable_kernel_fp(void)
 	}
 }
 EXPORT_SYMBOL(enable_kernel_fp);
-
-static int restore_fp(struct task_struct *tsk)
-{
-	if (tsk->thread.load_fp) {
-		load_fp_state(&current->thread.fp_state);
-		current->thread.load_fp++;
-		return 1;
-	}
-	return 0;
-}
-#else
-static int restore_fp(struct task_struct *tsk) { return 0; }
 #endif /* CONFIG_PPC_FPU */
 
 #ifdef CONFIG_ALTIVEC
-#define loadvec(thr) ((thr).load_vec)
-
 static void __giveup_altivec(struct task_struct *tsk)
 {
 	unsigned long msr;
@@ -318,21 +304,6 @@ void flush_altivec_to_thread(struct task_struct *tsk)
 	}
 }
 EXPORT_SYMBOL_GPL(flush_altivec_to_thread);
-
-static int restore_altivec(struct task_struct *tsk)
-{
-	if (cpu_has_feature(CPU_FTR_ALTIVEC) && (tsk->thread.load_vec)) {
-		load_vr_state(&tsk->thread.vr_state);
-		tsk->thread.used_vr = 1;
-		tsk->thread.load_vec++;
-
-		return 1;
-	}
-	return 0;
-}
-#else
-#define loadvec(thr) 0
-static inline int restore_altivec(struct task_struct *tsk) { return 0; }
 #endif /* CONFIG_ALTIVEC */
 
 #ifdef CONFIG_VSX
@@ -400,18 +371,6 @@ void flush_vsx_to_thread(struct task_struct *tsk)
 	}
 }
 EXPORT_SYMBOL_GPL(flush_vsx_to_thread);
-
-static int restore_vsx(struct task_struct *tsk)
-{
-	if (cpu_has_feature(CPU_FTR_VSX)) {
-		tsk->thread.used_vsr = 1;
-		return 1;
-	}
-
-	return 0;
-}
-#else
-static inline int restore_vsx(struct task_struct *tsk) { return 0; }
 #endif /* CONFIG_VSX */
 
 #ifdef CONFIG_SPE
@@ -511,6 +470,53 @@ void giveup_all(struct task_struct *tsk)
 }
 EXPORT_SYMBOL(giveup_all);
 
+#ifdef CONFIG_PPC_BOOK3S_64
+#ifdef CONFIG_PPC_FPU
+static int restore_fp(struct task_struct *tsk)
+{
+	if (tsk->thread.load_fp) {
+		load_fp_state(&current->thread.fp_state);
+		current->thread.load_fp++;
+		return 1;
+	}
+	return 0;
+}
+#else
+static int restore_fp(struct task_struct *tsk) { return 0; }
+#endif /* CONFIG_PPC_FPU */
+
+#ifdef CONFIG_ALTIVEC
+#define loadvec(thr) ((thr).load_vec)
+static int restore_altivec(struct task_struct *tsk)
+{
+	if (cpu_has_feature(CPU_FTR_ALTIVEC) && (tsk->thread.load_vec)) {
+		load_vr_state(&tsk->thread.vr_state);
+		tsk->thread.used_vr = 1;
+		tsk->thread.load_vec++;
+
+		return 1;
+	}
+	return 0;
+}
+#else
+#define loadvec(thr) 0
+static inline int restore_altivec(struct task_struct *tsk) { return 0; }
+#endif /* CONFIG_ALTIVEC */
+
+#ifdef CONFIG_VSX
+static int restore_vsx(struct task_struct *tsk)
+{
+	if (cpu_has_feature(CPU_FTR_VSX)) {
+		tsk->thread.used_vsr = 1;
+		return 1;
+	}
+
+	return 0;
+}
+#else
+static inline int restore_vsx(struct task_struct *tsk) { return 0; }
+#endif /* CONFIG_VSX */
+
 /*
  * The exception exit path calls restore_math() with interrupts hard disabled
  * but the soft irq state not "reconciled". ftrace code that calls
@@ -551,6 +557,7 @@ void notrace restore_math(struct pt_regs *regs)
 
 	regs->msr = msr;
 }
+#endif
 
 static void save_all(struct task_struct *tsk)
 {
@@ -1634,11 +1641,9 @@ int copy_thread_tls(unsigned long clone_flags, unsigned long usp,
 		p->thread.regs = childregs;
 		childregs->gpr[3] = 0;  /* Result from fork() */
 		if (clone_flags & CLONE_SETTLS) {
-#ifdef CONFIG_PPC64
 			if (!is_32bit_task())
 				childregs->gpr[13] = tls;
 			else
-#endif
 				childregs->gpr[2] = tls;
 		}
 
@@ -1976,6 +1981,32 @@ static inline int valid_irq_stack(unsigned long sp, struct task_struct *p,
 	return 0;
 }
 
+static inline int valid_emergency_stack(unsigned long sp, struct task_struct *p,
+					unsigned long nbytes)
+{
+#ifdef CONFIG_PPC64
+	unsigned long stack_page;
+	unsigned long cpu = task_cpu(p);
+
+	stack_page = (unsigned long)paca_ptrs[cpu]->emergency_sp - THREAD_SIZE;
+	if (sp >= stack_page && sp <= stack_page + THREAD_SIZE - nbytes)
+		return 1;
+
+# ifdef CONFIG_PPC_BOOK3S_64
+	stack_page = (unsigned long)paca_ptrs[cpu]->nmi_emergency_sp - THREAD_SIZE;
+	if (sp >= stack_page && sp <= stack_page + THREAD_SIZE - nbytes)
+		return 1;
+
+	stack_page = (unsigned long)paca_ptrs[cpu]->mc_emergency_sp - THREAD_SIZE;
+	if (sp >= stack_page && sp <= stack_page + THREAD_SIZE - nbytes)
+		return 1;
+# endif
+#endif
+
+	return 0;
+}
+
+
 int validate_sp(unsigned long sp, struct task_struct *p,
 		       unsigned long nbytes)
 {
@@ -1987,7 +2018,10 @@ int validate_sp(unsigned long sp, struct task_struct *p,
 	if (sp >= stack_page && sp <= stack_page + THREAD_SIZE - nbytes)
 		return 1;
 
-	return valid_irq_stack(sp, p, nbytes);
+	if (valid_irq_stack(sp, p, nbytes))
+		return 1;
+
+	return valid_emergency_stack(sp, p, nbytes);
 }
 
 EXPORT_SYMBOL(validate_sp);
@@ -2053,7 +2087,7 @@ void show_stack(struct task_struct *tsk, unsigned long *stack)
 	sp = (unsigned long) stack;
 	if (sp == 0) {
 		if (tsk == current)
-			sp = current_stack_pointer();
+			sp = current_stack_frame();
 		else
 			sp = tsk->thread.ksp;
 	}
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 5773453..806be75 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -1773,6 +1773,9 @@ static void __init prom_rtas_os_term(char *str)
 	if (token == 0)
 		prom_panic("Could not get token for ibm,os-term\n");
 	os_term_args.token = cpu_to_be32(token);
+	os_term_args.nargs = cpu_to_be32(1);
+	os_term_args.nret = cpu_to_be32(1);
+	os_term_args.args[0] = cpu_to_be32(__pa(str));
 	prom_rtas_hcall((uint64_t)&os_term_args);
 }
 #endif /* CONFIG_PPC_SVM */
@@ -3474,7 +3477,6 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
 	 */
 	hdr = dt_header_start;
 
-	/* Don't print anything after quiesce under OPAL, it crashes OFW */
 	prom_printf("Booting Linux via __start() @ 0x%lx ...\n", kbase);
 	prom_debug("->dt_header_start=0x%lx\n", hdr);
 
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
deleted file mode 100644
index 25c0424..0000000
--- a/arch/powerpc/kernel/ptrace.c
+++ /dev/null
@@ -1,3468 +0,0 @@
-/*
- *  PowerPC version
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Derived from "arch/m68k/kernel/ptrace.c"
- *  Copyright (C) 1994 by Hamish Macdonald
- *  Taken from linux/kernel/ptrace.c and modified for M680x0.
- *  linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds
- *
- * Modified by Cort Dougan (cort@hq.fsmlabs.com)
- * and Paul Mackerras (paulus@samba.org).
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file README.legal in the main directory of
- * this archive for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/errno.h>
-#include <linux/ptrace.h>
-#include <linux/regset.h>
-#include <linux/tracehook.h>
-#include <linux/elf.h>
-#include <linux/user.h>
-#include <linux/security.h>
-#include <linux/signal.h>
-#include <linux/seccomp.h>
-#include <linux/audit.h>
-#include <trace/syscall.h>
-#include <linux/hw_breakpoint.h>
-#include <linux/perf_event.h>
-#include <linux/context_tracking.h>
-#include <linux/nospec.h>
-
-#include <linux/uaccess.h>
-#include <linux/pkeys.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/switch_to.h>
-#include <asm/tm.h>
-#include <asm/asm-prototypes.h>
-#include <asm/debug.h>
-#include <asm/hw_breakpoint.h>
-
-#define CREATE_TRACE_POINTS
-#include <trace/events/syscalls.h>
-
-/*
- * The parameter save area on the stack is used to store arguments being passed
- * to callee function and is located at fixed offset from stack pointer.
- */
-#ifdef CONFIG_PPC32
-#define PARAMETER_SAVE_AREA_OFFSET	24  /* bytes */
-#else /* CONFIG_PPC32 */
-#define PARAMETER_SAVE_AREA_OFFSET	48  /* bytes */
-#endif
-
-struct pt_regs_offset {
-	const char *name;
-	int offset;
-};
-
-#define STR(s)	#s			/* convert to string */
-#define REG_OFFSET_NAME(r) {.name = #r, .offset = offsetof(struct pt_regs, r)}
-#define GPR_OFFSET_NAME(num)	\
-	{.name = STR(r##num), .offset = offsetof(struct pt_regs, gpr[num])}, \
-	{.name = STR(gpr##num), .offset = offsetof(struct pt_regs, gpr[num])}
-#define REG_OFFSET_END {.name = NULL, .offset = 0}
-
-#define TVSO(f)	(offsetof(struct thread_vr_state, f))
-#define TFSO(f)	(offsetof(struct thread_fp_state, f))
-#define TSO(f)	(offsetof(struct thread_struct, f))
-
-static const struct pt_regs_offset regoffset_table[] = {
-	GPR_OFFSET_NAME(0),
-	GPR_OFFSET_NAME(1),
-	GPR_OFFSET_NAME(2),
-	GPR_OFFSET_NAME(3),
-	GPR_OFFSET_NAME(4),
-	GPR_OFFSET_NAME(5),
-	GPR_OFFSET_NAME(6),
-	GPR_OFFSET_NAME(7),
-	GPR_OFFSET_NAME(8),
-	GPR_OFFSET_NAME(9),
-	GPR_OFFSET_NAME(10),
-	GPR_OFFSET_NAME(11),
-	GPR_OFFSET_NAME(12),
-	GPR_OFFSET_NAME(13),
-	GPR_OFFSET_NAME(14),
-	GPR_OFFSET_NAME(15),
-	GPR_OFFSET_NAME(16),
-	GPR_OFFSET_NAME(17),
-	GPR_OFFSET_NAME(18),
-	GPR_OFFSET_NAME(19),
-	GPR_OFFSET_NAME(20),
-	GPR_OFFSET_NAME(21),
-	GPR_OFFSET_NAME(22),
-	GPR_OFFSET_NAME(23),
-	GPR_OFFSET_NAME(24),
-	GPR_OFFSET_NAME(25),
-	GPR_OFFSET_NAME(26),
-	GPR_OFFSET_NAME(27),
-	GPR_OFFSET_NAME(28),
-	GPR_OFFSET_NAME(29),
-	GPR_OFFSET_NAME(30),
-	GPR_OFFSET_NAME(31),
-	REG_OFFSET_NAME(nip),
-	REG_OFFSET_NAME(msr),
-	REG_OFFSET_NAME(ctr),
-	REG_OFFSET_NAME(link),
-	REG_OFFSET_NAME(xer),
-	REG_OFFSET_NAME(ccr),
-#ifdef CONFIG_PPC64
-	REG_OFFSET_NAME(softe),
-#else
-	REG_OFFSET_NAME(mq),
-#endif
-	REG_OFFSET_NAME(trap),
-	REG_OFFSET_NAME(dar),
-	REG_OFFSET_NAME(dsisr),
-	REG_OFFSET_END,
-};
-
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-static void flush_tmregs_to_thread(struct task_struct *tsk)
-{
-	/*
-	 * If task is not current, it will have been flushed already to
-	 * it's thread_struct during __switch_to().
-	 *
-	 * A reclaim flushes ALL the state or if not in TM save TM SPRs
-	 * in the appropriate thread structures from live.
-	 */
-
-	if ((!cpu_has_feature(CPU_FTR_TM)) || (tsk != current))
-		return;
-
-	if (MSR_TM_SUSPENDED(mfmsr())) {
-		tm_reclaim_current(TM_CAUSE_SIGNAL);
-	} else {
-		tm_enable();
-		tm_save_sprs(&(tsk->thread));
-	}
-}
-#else
-static inline void flush_tmregs_to_thread(struct task_struct *tsk) { }
-#endif
-
-/**
- * regs_query_register_offset() - query register offset from its name
- * @name:	the name of a register
- *
- * regs_query_register_offset() returns the offset of a register in struct
- * pt_regs from its name. If the name is invalid, this returns -EINVAL;
- */
-int regs_query_register_offset(const char *name)
-{
-	const struct pt_regs_offset *roff;
-	for (roff = regoffset_table; roff->name != NULL; roff++)
-		if (!strcmp(roff->name, name))
-			return roff->offset;
-	return -EINVAL;
-}
-
-/**
- * regs_query_register_name() - query register name from its offset
- * @offset:	the offset of a register in struct pt_regs.
- *
- * regs_query_register_name() returns the name of a register from its
- * offset in struct pt_regs. If the @offset is invalid, this returns NULL;
- */
-const char *regs_query_register_name(unsigned int offset)
-{
-	const struct pt_regs_offset *roff;
-	for (roff = regoffset_table; roff->name != NULL; roff++)
-		if (roff->offset == offset)
-			return roff->name;
-	return NULL;
-}
-
-/*
- * does not yet catch signals sent when the child dies.
- * in exit.c or in signal.c.
- */
-
-/*
- * Set of msr bits that gdb can change on behalf of a process.
- */
-#ifdef CONFIG_PPC_ADV_DEBUG_REGS
-#define MSR_DEBUGCHANGE	0
-#else
-#define MSR_DEBUGCHANGE	(MSR_SE | MSR_BE)
-#endif
-
-/*
- * Max register writeable via put_reg
- */
-#ifdef CONFIG_PPC32
-#define PT_MAX_PUT_REG	PT_MQ
-#else
-#define PT_MAX_PUT_REG	PT_CCR
-#endif
-
-static unsigned long get_user_msr(struct task_struct *task)
-{
-	return task->thread.regs->msr | task->thread.fpexc_mode;
-}
-
-static int set_user_msr(struct task_struct *task, unsigned long msr)
-{
-	task->thread.regs->msr &= ~MSR_DEBUGCHANGE;
-	task->thread.regs->msr |= msr & MSR_DEBUGCHANGE;
-	return 0;
-}
-
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-static unsigned long get_user_ckpt_msr(struct task_struct *task)
-{
-	return task->thread.ckpt_regs.msr | task->thread.fpexc_mode;
-}
-
-static int set_user_ckpt_msr(struct task_struct *task, unsigned long msr)
-{
-	task->thread.ckpt_regs.msr &= ~MSR_DEBUGCHANGE;
-	task->thread.ckpt_regs.msr |= msr & MSR_DEBUGCHANGE;
-	return 0;
-}
-
-static int set_user_ckpt_trap(struct task_struct *task, unsigned long trap)
-{
-	task->thread.ckpt_regs.trap = trap & 0xfff0;
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_PPC64
-static int get_user_dscr(struct task_struct *task, unsigned long *data)
-{
-	*data = task->thread.dscr;
-	return 0;
-}
-
-static int set_user_dscr(struct task_struct *task, unsigned long dscr)
-{
-	task->thread.dscr = dscr;
-	task->thread.dscr_inherit = 1;
-	return 0;
-}
-#else
-static int get_user_dscr(struct task_struct *task, unsigned long *data)
-{
-	return -EIO;
-}
-
-static int set_user_dscr(struct task_struct *task, unsigned long dscr)
-{
-	return -EIO;
-}
-#endif
-
-/*
- * We prevent mucking around with the reserved area of trap
- * which are used internally by the kernel.
- */
-static int set_user_trap(struct task_struct *task, unsigned long trap)
-{
-	task->thread.regs->trap = trap & 0xfff0;
-	return 0;
-}
-
-/*
- * Get contents of register REGNO in task TASK.
- */
-int ptrace_get_reg(struct task_struct *task, int regno, unsigned long *data)
-{
-	unsigned int regs_max;
-
-	if ((task->thread.regs == NULL) || !data)
-		return -EIO;
-
-	if (regno == PT_MSR) {
-		*data = get_user_msr(task);
-		return 0;
-	}
-
-	if (regno == PT_DSCR)
-		return get_user_dscr(task, data);
-
-#ifdef CONFIG_PPC64
-	/*
-	 * softe copies paca->irq_soft_mask variable state. Since irq_soft_mask is
-	 * no more used as a flag, lets force usr to alway see the softe value as 1
-	 * which means interrupts are not soft disabled.
-	 */
-	if (regno == PT_SOFTE) {
-		*data = 1;
-		return  0;
-	}
-#endif
-
-	regs_max = sizeof(struct user_pt_regs) / sizeof(unsigned long);
-	if (regno < regs_max) {
-		regno = array_index_nospec(regno, regs_max);
-		*data = ((unsigned long *)task->thread.regs)[regno];
-		return 0;
-	}
-
-	return -EIO;
-}
-
-/*
- * Write contents of register REGNO in task TASK.
- */
-int ptrace_put_reg(struct task_struct *task, int regno, unsigned long data)
-{
-	if (task->thread.regs == NULL)
-		return -EIO;
-
-	if (regno == PT_MSR)
-		return set_user_msr(task, data);
-	if (regno == PT_TRAP)
-		return set_user_trap(task, data);
-	if (regno == PT_DSCR)
-		return set_user_dscr(task, data);
-
-	if (regno <= PT_MAX_PUT_REG) {
-		regno = array_index_nospec(regno, PT_MAX_PUT_REG + 1);
-		((unsigned long *)task->thread.regs)[regno] = data;
-		return 0;
-	}
-	return -EIO;
-}
-
-static int gpr_get(struct task_struct *target, const struct user_regset *regset,
-		   unsigned int pos, unsigned int count,
-		   void *kbuf, void __user *ubuf)
-{
-	int i, ret;
-
-	if (target->thread.regs == NULL)
-		return -EIO;
-
-	if (!FULL_REGS(target->thread.regs)) {
-		/* We have a partial register set.  Fill 14-31 with bogus values */
-		for (i = 14; i < 32; i++)
-			target->thread.regs->gpr[i] = NV_REG_POISON;
-	}
-
-	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-				  target->thread.regs,
-				  0, offsetof(struct pt_regs, msr));
-	if (!ret) {
-		unsigned long msr = get_user_msr(target);
-		ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &msr,
-					  offsetof(struct pt_regs, msr),
-					  offsetof(struct pt_regs, msr) +
-					  sizeof(msr));
-	}
-
-	BUILD_BUG_ON(offsetof(struct pt_regs, orig_gpr3) !=
-		     offsetof(struct pt_regs, msr) + sizeof(long));
-
-	if (!ret)
-		ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-					  &target->thread.regs->orig_gpr3,
-					  offsetof(struct pt_regs, orig_gpr3),
-					  sizeof(struct user_pt_regs));
-	if (!ret)
-		ret = user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
-					       sizeof(struct user_pt_regs), -1);
-
-	return ret;
-}
-
-static int gpr_set(struct task_struct *target, const struct user_regset *regset,
-		   unsigned int pos, unsigned int count,
-		   const void *kbuf, const void __user *ubuf)
-{
-	unsigned long reg;
-	int ret;
-
-	if (target->thread.regs == NULL)
-		return -EIO;
-
-	CHECK_FULL_REGS(target->thread.regs);
-
-	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-				 target->thread.regs,
-				 0, PT_MSR * sizeof(reg));
-
-	if (!ret && count > 0) {
-		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &reg,
-					 PT_MSR * sizeof(reg),
-					 (PT_MSR + 1) * sizeof(reg));
-		if (!ret)
-			ret = set_user_msr(target, reg);
-	}
-
-	BUILD_BUG_ON(offsetof(struct pt_regs, orig_gpr3) !=
-		     offsetof(struct pt_regs, msr) + sizeof(long));
-
-	if (!ret)
-		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-					 &target->thread.regs->orig_gpr3,
-					 PT_ORIG_R3 * sizeof(reg),
-					 (PT_MAX_PUT_REG + 1) * sizeof(reg));
-
-	if (PT_MAX_PUT_REG + 1 < PT_TRAP && !ret)
-		ret = user_regset_copyin_ignore(
-			&pos, &count, &kbuf, &ubuf,
-			(PT_MAX_PUT_REG + 1) * sizeof(reg),
-			PT_TRAP * sizeof(reg));
-
-	if (!ret && count > 0) {
-		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &reg,
-					 PT_TRAP * sizeof(reg),
-					 (PT_TRAP + 1) * sizeof(reg));
-		if (!ret)
-			ret = set_user_trap(target, reg);
-	}
-
-	if (!ret)
-		ret = user_regset_copyin_ignore(
-			&pos, &count, &kbuf, &ubuf,
-			(PT_TRAP + 1) * sizeof(reg), -1);
-
-	return ret;
-}
-
-/*
- * Regardless of transactions, 'fp_state' holds the current running
- * value of all FPR registers and 'ckfp_state' holds the last checkpointed
- * value of all FPR registers for the current transaction.
- *
- * Userspace interface buffer layout:
- *
- * struct data {
- *	u64	fpr[32];
- *	u64	fpscr;
- * };
- */
-static int fpr_get(struct task_struct *target, const struct user_regset *regset,
-		   unsigned int pos, unsigned int count,
-		   void *kbuf, void __user *ubuf)
-{
-#ifdef CONFIG_VSX
-	u64 buf[33];
-	int i;
-
-	flush_fp_to_thread(target);
-
-	/* copy to local buffer then write that out */
-	for (i = 0; i < 32 ; i++)
-		buf[i] = target->thread.TS_FPR(i);
-	buf[32] = target->thread.fp_state.fpscr;
-	return user_regset_copyout(&pos, &count, &kbuf, &ubuf, buf, 0, -1);
-#else
-	BUILD_BUG_ON(offsetof(struct thread_fp_state, fpscr) !=
-		     offsetof(struct thread_fp_state, fpr[32]));
-
-	flush_fp_to_thread(target);
-
-	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-				   &target->thread.fp_state, 0, -1);
-#endif
-}
-
-/*
- * Regardless of transactions, 'fp_state' holds the current running
- * value of all FPR registers and 'ckfp_state' holds the last checkpointed
- * value of all FPR registers for the current transaction.
- *
- * Userspace interface buffer layout:
- *
- * struct data {
- *	u64	fpr[32];
- *	u64	fpscr;
- * };
- *
- */
-static int fpr_set(struct task_struct *target, const struct user_regset *regset,
-		   unsigned int pos, unsigned int count,
-		   const void *kbuf, const void __user *ubuf)
-{
-#ifdef CONFIG_VSX
-	u64 buf[33];
-	int i;
-
-	flush_fp_to_thread(target);
-
-	for (i = 0; i < 32 ; i++)
-		buf[i] = target->thread.TS_FPR(i);
-	buf[32] = target->thread.fp_state.fpscr;
-
-	/* copy to local buffer then write that out */
-	i = user_regset_copyin(&pos, &count, &kbuf, &ubuf, buf, 0, -1);
-	if (i)
-		return i;
-
-	for (i = 0; i < 32 ; i++)
-		target->thread.TS_FPR(i) = buf[i];
-	target->thread.fp_state.fpscr = buf[32];
-	return 0;
-#else
-	BUILD_BUG_ON(offsetof(struct thread_fp_state, fpscr) !=
-		     offsetof(struct thread_fp_state, fpr[32]));
-
-	flush_fp_to_thread(target);
-
-	return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-				  &target->thread.fp_state, 0, -1);
-#endif
-}
-
-#ifdef CONFIG_ALTIVEC
-/*
- * Get/set all the altivec registers vr0..vr31, vscr, vrsave, in one go.
- * The transfer totals 34 quadword.  Quadwords 0-31 contain the
- * corresponding vector registers.  Quadword 32 contains the vscr as the
- * last word (offset 12) within that quadword.  Quadword 33 contains the
- * vrsave as the first word (offset 0) within the quadword.
- *
- * This definition of the VMX state is compatible with the current PPC32
- * ptrace interface.  This allows signal handling and ptrace to use the
- * same structures.  This also simplifies the implementation of a bi-arch
- * (combined (32- and 64-bit) gdb.
- */
-
-static int vr_active(struct task_struct *target,
-		     const struct user_regset *regset)
-{
-	flush_altivec_to_thread(target);
-	return target->thread.used_vr ? regset->n : 0;
-}
-
-/*
- * Regardless of transactions, 'vr_state' holds the current running
- * value of all the VMX registers and 'ckvr_state' holds the last
- * checkpointed value of all the VMX registers for the current
- * transaction to fall back on in case it aborts.
- *
- * Userspace interface buffer layout:
- *
- * struct data {
- *	vector128	vr[32];
- *	vector128	vscr;
- *	vector128	vrsave;
- * };
- */
-static int vr_get(struct task_struct *target, const struct user_regset *regset,
-		  unsigned int pos, unsigned int count,
-		  void *kbuf, void __user *ubuf)
-{
-	int ret;
-
-	flush_altivec_to_thread(target);
-
-	BUILD_BUG_ON(offsetof(struct thread_vr_state, vscr) !=
-		     offsetof(struct thread_vr_state, vr[32]));
-
-	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-				  &target->thread.vr_state, 0,
-				  33 * sizeof(vector128));
-	if (!ret) {
-		/*
-		 * Copy out only the low-order word of vrsave.
-		 */
-		int start, end;
-		union {
-			elf_vrreg_t reg;
-			u32 word;
-		} vrsave;
-		memset(&vrsave, 0, sizeof(vrsave));
-
-		vrsave.word = target->thread.vrsave;
-
-		start = 33 * sizeof(vector128);
-		end = start + sizeof(vrsave);
-		ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &vrsave,
-					  start, end);
-	}
-
-	return ret;
-}
-
-/*
- * Regardless of transactions, 'vr_state' holds the current running
- * value of all the VMX registers and 'ckvr_state' holds the last
- * checkpointed value of all the VMX registers for the current
- * transaction to fall back on in case it aborts.
- *
- * Userspace interface buffer layout:
- *
- * struct data {
- *	vector128	vr[32];
- *	vector128	vscr;
- *	vector128	vrsave;
- * };
- */
-static int vr_set(struct task_struct *target, const struct user_regset *regset,
-		  unsigned int pos, unsigned int count,
-		  const void *kbuf, const void __user *ubuf)
-{
-	int ret;
-
-	flush_altivec_to_thread(target);
-
-	BUILD_BUG_ON(offsetof(struct thread_vr_state, vscr) !=
-		     offsetof(struct thread_vr_state, vr[32]));
-
-	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-				 &target->thread.vr_state, 0,
-				 33 * sizeof(vector128));
-	if (!ret && count > 0) {
-		/*
-		 * We use only the first word of vrsave.
-		 */
-		int start, end;
-		union {
-			elf_vrreg_t reg;
-			u32 word;
-		} vrsave;
-		memset(&vrsave, 0, sizeof(vrsave));
-
-		vrsave.word = target->thread.vrsave;
-
-		start = 33 * sizeof(vector128);
-		end = start + sizeof(vrsave);
-		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &vrsave,
-					 start, end);
-		if (!ret)
-			target->thread.vrsave = vrsave.word;
-	}
-
-	return ret;
-}
-#endif /* CONFIG_ALTIVEC */
-
-#ifdef CONFIG_VSX
-/*
- * Currently to set and and get all the vsx state, you need to call
- * the fp and VMX calls as well.  This only get/sets the lower 32
- * 128bit VSX registers.
- */
-
-static int vsr_active(struct task_struct *target,
-		      const struct user_regset *regset)
-{
-	flush_vsx_to_thread(target);
-	return target->thread.used_vsr ? regset->n : 0;
-}
-
-/*
- * Regardless of transactions, 'fp_state' holds the current running
- * value of all FPR registers and 'ckfp_state' holds the last
- * checkpointed value of all FPR registers for the current
- * transaction.
- *
- * Userspace interface buffer layout:
- *
- * struct data {
- *	u64	vsx[32];
- * };
- */
-static int vsr_get(struct task_struct *target, const struct user_regset *regset,
-		   unsigned int pos, unsigned int count,
-		   void *kbuf, void __user *ubuf)
-{
-	u64 buf[32];
-	int ret, i;
-
-	flush_tmregs_to_thread(target);
-	flush_fp_to_thread(target);
-	flush_altivec_to_thread(target);
-	flush_vsx_to_thread(target);
-
-	for (i = 0; i < 32 ; i++)
-		buf[i] = target->thread.fp_state.fpr[i][TS_VSRLOWOFFSET];
-
-	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-				  buf, 0, 32 * sizeof(double));
-
-	return ret;
-}
-
-/*
- * Regardless of transactions, 'fp_state' holds the current running
- * value of all FPR registers and 'ckfp_state' holds the last
- * checkpointed value of all FPR registers for the current
- * transaction.
- *
- * Userspace interface buffer layout:
- *
- * struct data {
- *	u64	vsx[32];
- * };
- */
-static int vsr_set(struct task_struct *target, const struct user_regset *regset,
-		   unsigned int pos, unsigned int count,
-		   const void *kbuf, const void __user *ubuf)
-{
-	u64 buf[32];
-	int ret,i;
-
-	flush_tmregs_to_thread(target);
-	flush_fp_to_thread(target);
-	flush_altivec_to_thread(target);
-	flush_vsx_to_thread(target);
-
-	for (i = 0; i < 32 ; i++)
-		buf[i] = target->thread.fp_state.fpr[i][TS_VSRLOWOFFSET];
-
-	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-				 buf, 0, 32 * sizeof(double));
-	if (!ret)
-		for (i = 0; i < 32 ; i++)
-			target->thread.fp_state.fpr[i][TS_VSRLOWOFFSET] = buf[i];
-
-	return ret;
-}
-#endif /* CONFIG_VSX */
-
-#ifdef CONFIG_SPE
-
-/*
- * For get_evrregs/set_evrregs functions 'data' has the following layout:
- *
- * struct {
- *   u32 evr[32];
- *   u64 acc;
- *   u32 spefscr;
- * }
- */
-
-static int evr_active(struct task_struct *target,
-		      const struct user_regset *regset)
-{
-	flush_spe_to_thread(target);
-	return target->thread.used_spe ? regset->n : 0;
-}
-
-static int evr_get(struct task_struct *target, const struct user_regset *regset,
-		   unsigned int pos, unsigned int count,
-		   void *kbuf, void __user *ubuf)
-{
-	int ret;
-
-	flush_spe_to_thread(target);
-
-	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-				  &target->thread.evr,
-				  0, sizeof(target->thread.evr));
-
-	BUILD_BUG_ON(offsetof(struct thread_struct, acc) + sizeof(u64) !=
-		     offsetof(struct thread_struct, spefscr));
-
-	if (!ret)
-		ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-					  &target->thread.acc,
-					  sizeof(target->thread.evr), -1);
-
-	return ret;
-}
-
-static int evr_set(struct task_struct *target, const struct user_regset *regset,
-		   unsigned int pos, unsigned int count,
-		   const void *kbuf, const void __user *ubuf)
-{
-	int ret;
-
-	flush_spe_to_thread(target);
-
-	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-				 &target->thread.evr,
-				 0, sizeof(target->thread.evr));
-
-	BUILD_BUG_ON(offsetof(struct thread_struct, acc) + sizeof(u64) !=
-		     offsetof(struct thread_struct, spefscr));
-
-	if (!ret)
-		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-					 &target->thread.acc,
-					 sizeof(target->thread.evr), -1);
-
-	return ret;
-}
-#endif /* CONFIG_SPE */
-
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-/**
- * tm_cgpr_active - get active number of registers in CGPR
- * @target:	The target task.
- * @regset:	The user regset structure.
- *
- * This function checks for the active number of available
- * regisers in transaction checkpointed GPR category.
- */
-static int tm_cgpr_active(struct task_struct *target,
-			  const struct user_regset *regset)
-{
-	if (!cpu_has_feature(CPU_FTR_TM))
-		return -ENODEV;
-
-	if (!MSR_TM_ACTIVE(target->thread.regs->msr))
-		return 0;
-
-	return regset->n;
-}
-
-/**
- * tm_cgpr_get - get CGPR registers
- * @target:	The target task.
- * @regset:	The user regset structure.
- * @pos:	The buffer position.
- * @count:	Number of bytes to copy.
- * @kbuf:	Kernel buffer to copy from.
- * @ubuf:	User buffer to copy into.
- *
- * This function gets transaction checkpointed GPR registers.
- *
- * When the transaction is active, 'ckpt_regs' holds all the checkpointed
- * GPR register values for the current transaction to fall back on if it
- * aborts in between. This function gets those checkpointed GPR registers.
- * The userspace interface buffer layout is as follows.
- *
- * struct data {
- *	struct pt_regs ckpt_regs;
- * };
- */
-static int tm_cgpr_get(struct task_struct *target,
-			const struct user_regset *regset,
-			unsigned int pos, unsigned int count,
-			void *kbuf, void __user *ubuf)
-{
-	int ret;
-
-	if (!cpu_has_feature(CPU_FTR_TM))
-		return -ENODEV;
-
-	if (!MSR_TM_ACTIVE(target->thread.regs->msr))
-		return -ENODATA;
-
-	flush_tmregs_to_thread(target);
-	flush_fp_to_thread(target);
-	flush_altivec_to_thread(target);
-
-	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-				  &target->thread.ckpt_regs,
-				  0, offsetof(struct pt_regs, msr));
-	if (!ret) {
-		unsigned long msr = get_user_ckpt_msr(target);
-
-		ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &msr,
-					  offsetof(struct pt_regs, msr),
-					  offsetof(struct pt_regs, msr) +
-					  sizeof(msr));
-	}
-
-	BUILD_BUG_ON(offsetof(struct pt_regs, orig_gpr3) !=
-		     offsetof(struct pt_regs, msr) + sizeof(long));
-
-	if (!ret)
-		ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-					  &target->thread.ckpt_regs.orig_gpr3,
-					  offsetof(struct pt_regs, orig_gpr3),
-					  sizeof(struct user_pt_regs));
-	if (!ret)
-		ret = user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
-					       sizeof(struct user_pt_regs), -1);
-
-	return ret;
-}
-
-/*
- * tm_cgpr_set - set the CGPR registers
- * @target:	The target task.
- * @regset:	The user regset structure.
- * @pos:	The buffer position.
- * @count:	Number of bytes to copy.
- * @kbuf:	Kernel buffer to copy into.
- * @ubuf:	User buffer to copy from.
- *
- * This function sets in transaction checkpointed GPR registers.
- *
- * When the transaction is active, 'ckpt_regs' holds the checkpointed
- * GPR register values for the current transaction to fall back on if it
- * aborts in between. This function sets those checkpointed GPR registers.
- * The userspace interface buffer layout is as follows.
- *
- * struct data {
- *	struct pt_regs ckpt_regs;
- * };
- */
-static int tm_cgpr_set(struct task_struct *target,
-			const struct user_regset *regset,
-			unsigned int pos, unsigned int count,
-			const void *kbuf, const void __user *ubuf)
-{
-	unsigned long reg;
-	int ret;
-
-	if (!cpu_has_feature(CPU_FTR_TM))
-		return -ENODEV;
-
-	if (!MSR_TM_ACTIVE(target->thread.regs->msr))
-		return -ENODATA;
-
-	flush_tmregs_to_thread(target);
-	flush_fp_to_thread(target);
-	flush_altivec_to_thread(target);
-
-	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-				 &target->thread.ckpt_regs,
-				 0, PT_MSR * sizeof(reg));
-
-	if (!ret && count > 0) {
-		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &reg,
-					 PT_MSR * sizeof(reg),
-					 (PT_MSR + 1) * sizeof(reg));
-		if (!ret)
-			ret = set_user_ckpt_msr(target, reg);
-	}
-
-	BUILD_BUG_ON(offsetof(struct pt_regs, orig_gpr3) !=
-		     offsetof(struct pt_regs, msr) + sizeof(long));
-
-	if (!ret)
-		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-					 &target->thread.ckpt_regs.orig_gpr3,
-					 PT_ORIG_R3 * sizeof(reg),
-					 (PT_MAX_PUT_REG + 1) * sizeof(reg));
-
-	if (PT_MAX_PUT_REG + 1 < PT_TRAP && !ret)
-		ret = user_regset_copyin_ignore(
-			&pos, &count, &kbuf, &ubuf,
-			(PT_MAX_PUT_REG + 1) * sizeof(reg),
-			PT_TRAP * sizeof(reg));
-
-	if (!ret && count > 0) {
-		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &reg,
-					 PT_TRAP * sizeof(reg),
-					 (PT_TRAP + 1) * sizeof(reg));
-		if (!ret)
-			ret = set_user_ckpt_trap(target, reg);
-	}
-
-	if (!ret)
-		ret = user_regset_copyin_ignore(
-			&pos, &count, &kbuf, &ubuf,
-			(PT_TRAP + 1) * sizeof(reg), -1);
-
-	return ret;
-}
-
-/**
- * tm_cfpr_active - get active number of registers in CFPR
- * @target:	The target task.
- * @regset:	The user regset structure.
- *
- * This function checks for the active number of available
- * regisers in transaction checkpointed FPR category.
- */
-static int tm_cfpr_active(struct task_struct *target,
-				const struct user_regset *regset)
-{
-	if (!cpu_has_feature(CPU_FTR_TM))
-		return -ENODEV;
-
-	if (!MSR_TM_ACTIVE(target->thread.regs->msr))
-		return 0;
-
-	return regset->n;
-}
-
-/**
- * tm_cfpr_get - get CFPR registers
- * @target:	The target task.
- * @regset:	The user regset structure.
- * @pos:	The buffer position.
- * @count:	Number of bytes to copy.
- * @kbuf:	Kernel buffer to copy from.
- * @ubuf:	User buffer to copy into.
- *
- * This function gets in transaction checkpointed FPR registers.
- *
- * When the transaction is active 'ckfp_state' holds the checkpointed
- * values for the current transaction to fall back on if it aborts
- * in between. This function gets those checkpointed FPR registers.
- * The userspace interface buffer layout is as follows.
- *
- * struct data {
- *	u64	fpr[32];
- *	u64	fpscr;
- *};
- */
-static int tm_cfpr_get(struct task_struct *target,
-			const struct user_regset *regset,
-			unsigned int pos, unsigned int count,
-			void *kbuf, void __user *ubuf)
-{
-	u64 buf[33];
-	int i;
-
-	if (!cpu_has_feature(CPU_FTR_TM))
-		return -ENODEV;
-
-	if (!MSR_TM_ACTIVE(target->thread.regs->msr))
-		return -ENODATA;
-
-	flush_tmregs_to_thread(target);
-	flush_fp_to_thread(target);
-	flush_altivec_to_thread(target);
-
-	/* copy to local buffer then write that out */
-	for (i = 0; i < 32 ; i++)
-		buf[i] = target->thread.TS_CKFPR(i);
-	buf[32] = target->thread.ckfp_state.fpscr;
-	return user_regset_copyout(&pos, &count, &kbuf, &ubuf, buf, 0, -1);
-}
-
-/**
- * tm_cfpr_set - set CFPR registers
- * @target:	The target task.
- * @regset:	The user regset structure.
- * @pos:	The buffer position.
- * @count:	Number of bytes to copy.
- * @kbuf:	Kernel buffer to copy into.
- * @ubuf:	User buffer to copy from.
- *
- * This function sets in transaction checkpointed FPR registers.
- *
- * When the transaction is active 'ckfp_state' holds the checkpointed
- * FPR register values for the current transaction to fall back on
- * if it aborts in between. This function sets these checkpointed
- * FPR registers. The userspace interface buffer layout is as follows.
- *
- * struct data {
- *	u64	fpr[32];
- *	u64	fpscr;
- *};
- */
-static int tm_cfpr_set(struct task_struct *target,
-			const struct user_regset *regset,
-			unsigned int pos, unsigned int count,
-			const void *kbuf, const void __user *ubuf)
-{
-	u64 buf[33];
-	int i;
-
-	if (!cpu_has_feature(CPU_FTR_TM))
-		return -ENODEV;
-
-	if (!MSR_TM_ACTIVE(target->thread.regs->msr))
-		return -ENODATA;
-
-	flush_tmregs_to_thread(target);
-	flush_fp_to_thread(target);
-	flush_altivec_to_thread(target);
-
-	for (i = 0; i < 32; i++)
-		buf[i] = target->thread.TS_CKFPR(i);
-	buf[32] = target->thread.ckfp_state.fpscr;
-
-	/* copy to local buffer then write that out */
-	i = user_regset_copyin(&pos, &count, &kbuf, &ubuf, buf, 0, -1);
-	if (i)
-		return i;
-	for (i = 0; i < 32 ; i++)
-		target->thread.TS_CKFPR(i) = buf[i];
-	target->thread.ckfp_state.fpscr = buf[32];
-	return 0;
-}
-
-/**
- * tm_cvmx_active - get active number of registers in CVMX
- * @target:	The target task.
- * @regset:	The user regset structure.
- *
- * This function checks for the active number of available
- * regisers in checkpointed VMX category.
- */
-static int tm_cvmx_active(struct task_struct *target,
-				const struct user_regset *regset)
-{
-	if (!cpu_has_feature(CPU_FTR_TM))
-		return -ENODEV;
-
-	if (!MSR_TM_ACTIVE(target->thread.regs->msr))
-		return 0;
-
-	return regset->n;
-}
-
-/**
- * tm_cvmx_get - get CMVX registers
- * @target:	The target task.
- * @regset:	The user regset structure.
- * @pos:	The buffer position.
- * @count:	Number of bytes to copy.
- * @kbuf:	Kernel buffer to copy from.
- * @ubuf:	User buffer to copy into.
- *
- * This function gets in transaction checkpointed VMX registers.
- *
- * When the transaction is active 'ckvr_state' and 'ckvrsave' hold
- * the checkpointed values for the current transaction to fall
- * back on if it aborts in between. The userspace interface buffer
- * layout is as follows.
- *
- * struct data {
- *	vector128	vr[32];
- *	vector128	vscr;
- *	vector128	vrsave;
- *};
- */
-static int tm_cvmx_get(struct task_struct *target,
-			const struct user_regset *regset,
-			unsigned int pos, unsigned int count,
-			void *kbuf, void __user *ubuf)
-{
-	int ret;
-
-	BUILD_BUG_ON(TVSO(vscr) != TVSO(vr[32]));
-
-	if (!cpu_has_feature(CPU_FTR_TM))
-		return -ENODEV;
-
-	if (!MSR_TM_ACTIVE(target->thread.regs->msr))
-		return -ENODATA;
-
-	/* Flush the state */
-	flush_tmregs_to_thread(target);
-	flush_fp_to_thread(target);
-	flush_altivec_to_thread(target);
-
-	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-					&target->thread.ckvr_state, 0,
-					33 * sizeof(vector128));
-	if (!ret) {
-		/*
-		 * Copy out only the low-order word of vrsave.
-		 */
-		union {
-			elf_vrreg_t reg;
-			u32 word;
-		} vrsave;
-		memset(&vrsave, 0, sizeof(vrsave));
-		vrsave.word = target->thread.ckvrsave;
-		ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &vrsave,
-						33 * sizeof(vector128), -1);
-	}
-
-	return ret;
-}
-
-/**
- * tm_cvmx_set - set CMVX registers
- * @target:	The target task.
- * @regset:	The user regset structure.
- * @pos:	The buffer position.
- * @count:	Number of bytes to copy.
- * @kbuf:	Kernel buffer to copy into.
- * @ubuf:	User buffer to copy from.
- *
- * This function sets in transaction checkpointed VMX registers.
- *
- * When the transaction is active 'ckvr_state' and 'ckvrsave' hold
- * the checkpointed values for the current transaction to fall
- * back on if it aborts in between. The userspace interface buffer
- * layout is as follows.
- *
- * struct data {
- *	vector128	vr[32];
- *	vector128	vscr;
- *	vector128	vrsave;
- *};
- */
-static int tm_cvmx_set(struct task_struct *target,
-			const struct user_regset *regset,
-			unsigned int pos, unsigned int count,
-			const void *kbuf, const void __user *ubuf)
-{
-	int ret;
-
-	BUILD_BUG_ON(TVSO(vscr) != TVSO(vr[32]));
-
-	if (!cpu_has_feature(CPU_FTR_TM))
-		return -ENODEV;
-
-	if (!MSR_TM_ACTIVE(target->thread.regs->msr))
-		return -ENODATA;
-
-	flush_tmregs_to_thread(target);
-	flush_fp_to_thread(target);
-	flush_altivec_to_thread(target);
-
-	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-					&target->thread.ckvr_state, 0,
-					33 * sizeof(vector128));
-	if (!ret && count > 0) {
-		/*
-		 * We use only the low-order word of vrsave.
-		 */
-		union {
-			elf_vrreg_t reg;
-			u32 word;
-		} vrsave;
-		memset(&vrsave, 0, sizeof(vrsave));
-		vrsave.word = target->thread.ckvrsave;
-		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &vrsave,
-						33 * sizeof(vector128), -1);
-		if (!ret)
-			target->thread.ckvrsave = vrsave.word;
-	}
-
-	return ret;
-}
-
-/**
- * tm_cvsx_active - get active number of registers in CVSX
- * @target:	The target task.
- * @regset:	The user regset structure.
- *
- * This function checks for the active number of available
- * regisers in transaction checkpointed VSX category.
- */
-static int tm_cvsx_active(struct task_struct *target,
-				const struct user_regset *regset)
-{
-	if (!cpu_has_feature(CPU_FTR_TM))
-		return -ENODEV;
-
-	if (!MSR_TM_ACTIVE(target->thread.regs->msr))
-		return 0;
-
-	flush_vsx_to_thread(target);
-	return target->thread.used_vsr ? regset->n : 0;
-}
-
-/**
- * tm_cvsx_get - get CVSX registers
- * @target:	The target task.
- * @regset:	The user regset structure.
- * @pos:	The buffer position.
- * @count:	Number of bytes to copy.
- * @kbuf:	Kernel buffer to copy from.
- * @ubuf:	User buffer to copy into.
- *
- * This function gets in transaction checkpointed VSX registers.
- *
- * When the transaction is active 'ckfp_state' holds the checkpointed
- * values for the current transaction to fall back on if it aborts
- * in between. This function gets those checkpointed VSX registers.
- * The userspace interface buffer layout is as follows.
- *
- * struct data {
- *	u64	vsx[32];
- *};
- */
-static int tm_cvsx_get(struct task_struct *target,
-			const struct user_regset *regset,
-			unsigned int pos, unsigned int count,
-			void *kbuf, void __user *ubuf)
-{
-	u64 buf[32];
-	int ret, i;
-
-	if (!cpu_has_feature(CPU_FTR_TM))
-		return -ENODEV;
-
-	if (!MSR_TM_ACTIVE(target->thread.regs->msr))
-		return -ENODATA;
-
-	/* Flush the state */
-	flush_tmregs_to_thread(target);
-	flush_fp_to_thread(target);
-	flush_altivec_to_thread(target);
-	flush_vsx_to_thread(target);
-
-	for (i = 0; i < 32 ; i++)
-		buf[i] = target->thread.ckfp_state.fpr[i][TS_VSRLOWOFFSET];
-	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-				  buf, 0, 32 * sizeof(double));
-
-	return ret;
-}
-
-/**
- * tm_cvsx_set - set CFPR registers
- * @target:	The target task.
- * @regset:	The user regset structure.
- * @pos:	The buffer position.
- * @count:	Number of bytes to copy.
- * @kbuf:	Kernel buffer to copy into.
- * @ubuf:	User buffer to copy from.
- *
- * This function sets in transaction checkpointed VSX registers.
- *
- * When the transaction is active 'ckfp_state' holds the checkpointed
- * VSX register values for the current transaction to fall back on
- * if it aborts in between. This function sets these checkpointed
- * FPR registers. The userspace interface buffer layout is as follows.
- *
- * struct data {
- *	u64	vsx[32];
- *};
- */
-static int tm_cvsx_set(struct task_struct *target,
-			const struct user_regset *regset,
-			unsigned int pos, unsigned int count,
-			const void *kbuf, const void __user *ubuf)
-{
-	u64 buf[32];
-	int ret, i;
-
-	if (!cpu_has_feature(CPU_FTR_TM))
-		return -ENODEV;
-
-	if (!MSR_TM_ACTIVE(target->thread.regs->msr))
-		return -ENODATA;
-
-	/* Flush the state */
-	flush_tmregs_to_thread(target);
-	flush_fp_to_thread(target);
-	flush_altivec_to_thread(target);
-	flush_vsx_to_thread(target);
-
-	for (i = 0; i < 32 ; i++)
-		buf[i] = target->thread.ckfp_state.fpr[i][TS_VSRLOWOFFSET];
-
-	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-				 buf, 0, 32 * sizeof(double));
-	if (!ret)
-		for (i = 0; i < 32 ; i++)
-			target->thread.ckfp_state.fpr[i][TS_VSRLOWOFFSET] = buf[i];
-
-	return ret;
-}
-
-/**
- * tm_spr_active - get active number of registers in TM SPR
- * @target:	The target task.
- * @regset:	The user regset structure.
- *
- * This function checks the active number of available
- * regisers in the transactional memory SPR category.
- */
-static int tm_spr_active(struct task_struct *target,
-			 const struct user_regset *regset)
-{
-	if (!cpu_has_feature(CPU_FTR_TM))
-		return -ENODEV;
-
-	return regset->n;
-}
-
-/**
- * tm_spr_get - get the TM related SPR registers
- * @target:	The target task.
- * @regset:	The user regset structure.
- * @pos:	The buffer position.
- * @count:	Number of bytes to copy.
- * @kbuf:	Kernel buffer to copy from.
- * @ubuf:	User buffer to copy into.
- *
- * This function gets transactional memory related SPR registers.
- * The userspace interface buffer layout is as follows.
- *
- * struct {
- *	u64		tm_tfhar;
- *	u64		tm_texasr;
- *	u64		tm_tfiar;
- * };
- */
-static int tm_spr_get(struct task_struct *target,
-		      const struct user_regset *regset,
-		      unsigned int pos, unsigned int count,
-		      void *kbuf, void __user *ubuf)
-{
-	int ret;
-
-	/* Build tests */
-	BUILD_BUG_ON(TSO(tm_tfhar) + sizeof(u64) != TSO(tm_texasr));
-	BUILD_BUG_ON(TSO(tm_texasr) + sizeof(u64) != TSO(tm_tfiar));
-	BUILD_BUG_ON(TSO(tm_tfiar) + sizeof(u64) != TSO(ckpt_regs));
-
-	if (!cpu_has_feature(CPU_FTR_TM))
-		return -ENODEV;
-
-	/* Flush the states */
-	flush_tmregs_to_thread(target);
-	flush_fp_to_thread(target);
-	flush_altivec_to_thread(target);
-
-	/* TFHAR register */
-	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-				&target->thread.tm_tfhar, 0, sizeof(u64));
-
-	/* TEXASR register */
-	if (!ret)
-		ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-				&target->thread.tm_texasr, sizeof(u64),
-				2 * sizeof(u64));
-
-	/* TFIAR register */
-	if (!ret)
-		ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-				&target->thread.tm_tfiar,
-				2 * sizeof(u64), 3 * sizeof(u64));
-	return ret;
-}
-
-/**
- * tm_spr_set - set the TM related SPR registers
- * @target:	The target task.
- * @regset:	The user regset structure.
- * @pos:	The buffer position.
- * @count:	Number of bytes to copy.
- * @kbuf:	Kernel buffer to copy into.
- * @ubuf:	User buffer to copy from.
- *
- * This function sets transactional memory related SPR registers.
- * The userspace interface buffer layout is as follows.
- *
- * struct {
- *	u64		tm_tfhar;
- *	u64		tm_texasr;
- *	u64		tm_tfiar;
- * };
- */
-static int tm_spr_set(struct task_struct *target,
-		      const struct user_regset *regset,
-		      unsigned int pos, unsigned int count,
-		      const void *kbuf, const void __user *ubuf)
-{
-	int ret;
-
-	/* Build tests */
-	BUILD_BUG_ON(TSO(tm_tfhar) + sizeof(u64) != TSO(tm_texasr));
-	BUILD_BUG_ON(TSO(tm_texasr) + sizeof(u64) != TSO(tm_tfiar));
-	BUILD_BUG_ON(TSO(tm_tfiar) + sizeof(u64) != TSO(ckpt_regs));
-
-	if (!cpu_has_feature(CPU_FTR_TM))
-		return -ENODEV;
-
-	/* Flush the states */
-	flush_tmregs_to_thread(target);
-	flush_fp_to_thread(target);
-	flush_altivec_to_thread(target);
-
-	/* TFHAR register */
-	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-				&target->thread.tm_tfhar, 0, sizeof(u64));
-
-	/* TEXASR register */
-	if (!ret)
-		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-				&target->thread.tm_texasr, sizeof(u64),
-				2 * sizeof(u64));
-
-	/* TFIAR register */
-	if (!ret)
-		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-				&target->thread.tm_tfiar,
-				 2 * sizeof(u64), 3 * sizeof(u64));
-	return ret;
-}
-
-static int tm_tar_active(struct task_struct *target,
-			 const struct user_regset *regset)
-{
-	if (!cpu_has_feature(CPU_FTR_TM))
-		return -ENODEV;
-
-	if (MSR_TM_ACTIVE(target->thread.regs->msr))
-		return regset->n;
-
-	return 0;
-}
-
-static int tm_tar_get(struct task_struct *target,
-		      const struct user_regset *regset,
-		      unsigned int pos, unsigned int count,
-		      void *kbuf, void __user *ubuf)
-{
-	int ret;
-
-	if (!cpu_has_feature(CPU_FTR_TM))
-		return -ENODEV;
-
-	if (!MSR_TM_ACTIVE(target->thread.regs->msr))
-		return -ENODATA;
-
-	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-				&target->thread.tm_tar, 0, sizeof(u64));
-	return ret;
-}
-
-static int tm_tar_set(struct task_struct *target,
-		      const struct user_regset *regset,
-		      unsigned int pos, unsigned int count,
-		      const void *kbuf, const void __user *ubuf)
-{
-	int ret;
-
-	if (!cpu_has_feature(CPU_FTR_TM))
-		return -ENODEV;
-
-	if (!MSR_TM_ACTIVE(target->thread.regs->msr))
-		return -ENODATA;
-
-	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-				&target->thread.tm_tar, 0, sizeof(u64));
-	return ret;
-}
-
-static int tm_ppr_active(struct task_struct *target,
-			 const struct user_regset *regset)
-{
-	if (!cpu_has_feature(CPU_FTR_TM))
-		return -ENODEV;
-
-	if (MSR_TM_ACTIVE(target->thread.regs->msr))
-		return regset->n;
-
-	return 0;
-}
-
-
-static int tm_ppr_get(struct task_struct *target,
-		      const struct user_regset *regset,
-		      unsigned int pos, unsigned int count,
-		      void *kbuf, void __user *ubuf)
-{
-	int ret;
-
-	if (!cpu_has_feature(CPU_FTR_TM))
-		return -ENODEV;
-
-	if (!MSR_TM_ACTIVE(target->thread.regs->msr))
-		return -ENODATA;
-
-	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-				&target->thread.tm_ppr, 0, sizeof(u64));
-	return ret;
-}
-
-static int tm_ppr_set(struct task_struct *target,
-		      const struct user_regset *regset,
-		      unsigned int pos, unsigned int count,
-		      const void *kbuf, const void __user *ubuf)
-{
-	int ret;
-
-	if (!cpu_has_feature(CPU_FTR_TM))
-		return -ENODEV;
-
-	if (!MSR_TM_ACTIVE(target->thread.regs->msr))
-		return -ENODATA;
-
-	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-				&target->thread.tm_ppr, 0, sizeof(u64));
-	return ret;
-}
-
-static int tm_dscr_active(struct task_struct *target,
-			 const struct user_regset *regset)
-{
-	if (!cpu_has_feature(CPU_FTR_TM))
-		return -ENODEV;
-
-	if (MSR_TM_ACTIVE(target->thread.regs->msr))
-		return regset->n;
-
-	return 0;
-}
-
-static int tm_dscr_get(struct task_struct *target,
-		      const struct user_regset *regset,
-		      unsigned int pos, unsigned int count,
-		      void *kbuf, void __user *ubuf)
-{
-	int ret;
-
-	if (!cpu_has_feature(CPU_FTR_TM))
-		return -ENODEV;
-
-	if (!MSR_TM_ACTIVE(target->thread.regs->msr))
-		return -ENODATA;
-
-	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-				&target->thread.tm_dscr, 0, sizeof(u64));
-	return ret;
-}
-
-static int tm_dscr_set(struct task_struct *target,
-		      const struct user_regset *regset,
-		      unsigned int pos, unsigned int count,
-		      const void *kbuf, const void __user *ubuf)
-{
-	int ret;
-
-	if (!cpu_has_feature(CPU_FTR_TM))
-		return -ENODEV;
-
-	if (!MSR_TM_ACTIVE(target->thread.regs->msr))
-		return -ENODATA;
-
-	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-				&target->thread.tm_dscr, 0, sizeof(u64));
-	return ret;
-}
-#endif	/* CONFIG_PPC_TRANSACTIONAL_MEM */
-
-#ifdef CONFIG_PPC64
-static int ppr_get(struct task_struct *target,
-		      const struct user_regset *regset,
-		      unsigned int pos, unsigned int count,
-		      void *kbuf, void __user *ubuf)
-{
-	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-				   &target->thread.regs->ppr, 0, sizeof(u64));
-}
-
-static int ppr_set(struct task_struct *target,
-		      const struct user_regset *regset,
-		      unsigned int pos, unsigned int count,
-		      const void *kbuf, const void __user *ubuf)
-{
-	return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-				  &target->thread.regs->ppr, 0, sizeof(u64));
-}
-
-static int dscr_get(struct task_struct *target,
-		      const struct user_regset *regset,
-		      unsigned int pos, unsigned int count,
-		      void *kbuf, void __user *ubuf)
-{
-	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-				   &target->thread.dscr, 0, sizeof(u64));
-}
-static int dscr_set(struct task_struct *target,
-		      const struct user_regset *regset,
-		      unsigned int pos, unsigned int count,
-		      const void *kbuf, const void __user *ubuf)
-{
-	return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-				  &target->thread.dscr, 0, sizeof(u64));
-}
-#endif
-#ifdef CONFIG_PPC_BOOK3S_64
-static int tar_get(struct task_struct *target,
-		      const struct user_regset *regset,
-		      unsigned int pos, unsigned int count,
-		      void *kbuf, void __user *ubuf)
-{
-	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-				   &target->thread.tar, 0, sizeof(u64));
-}
-static int tar_set(struct task_struct *target,
-		      const struct user_regset *regset,
-		      unsigned int pos, unsigned int count,
-		      const void *kbuf, const void __user *ubuf)
-{
-	return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-				  &target->thread.tar, 0, sizeof(u64));
-}
-
-static int ebb_active(struct task_struct *target,
-			 const struct user_regset *regset)
-{
-	if (!cpu_has_feature(CPU_FTR_ARCH_207S))
-		return -ENODEV;
-
-	if (target->thread.used_ebb)
-		return regset->n;
-
-	return 0;
-}
-
-static int ebb_get(struct task_struct *target,
-		      const struct user_regset *regset,
-		      unsigned int pos, unsigned int count,
-		      void *kbuf, void __user *ubuf)
-{
-	/* Build tests */
-	BUILD_BUG_ON(TSO(ebbrr) + sizeof(unsigned long) != TSO(ebbhr));
-	BUILD_BUG_ON(TSO(ebbhr) + sizeof(unsigned long) != TSO(bescr));
-
-	if (!cpu_has_feature(CPU_FTR_ARCH_207S))
-		return -ENODEV;
-
-	if (!target->thread.used_ebb)
-		return -ENODATA;
-
-	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-			&target->thread.ebbrr, 0, 3 * sizeof(unsigned long));
-}
-
-static int ebb_set(struct task_struct *target,
-		      const struct user_regset *regset,
-		      unsigned int pos, unsigned int count,
-		      const void *kbuf, const void __user *ubuf)
-{
-	int ret = 0;
-
-	/* Build tests */
-	BUILD_BUG_ON(TSO(ebbrr) + sizeof(unsigned long) != TSO(ebbhr));
-	BUILD_BUG_ON(TSO(ebbhr) + sizeof(unsigned long) != TSO(bescr));
-
-	if (!cpu_has_feature(CPU_FTR_ARCH_207S))
-		return -ENODEV;
-
-	if (target->thread.used_ebb)
-		return -ENODATA;
-
-	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-			&target->thread.ebbrr, 0, sizeof(unsigned long));
-
-	if (!ret)
-		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-			&target->thread.ebbhr, sizeof(unsigned long),
-			2 * sizeof(unsigned long));
-
-	if (!ret)
-		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-			&target->thread.bescr,
-			2 * sizeof(unsigned long), 3 * sizeof(unsigned long));
-
-	return ret;
-}
-static int pmu_active(struct task_struct *target,
-			 const struct user_regset *regset)
-{
-	if (!cpu_has_feature(CPU_FTR_ARCH_207S))
-		return -ENODEV;
-
-	return regset->n;
-}
-
-static int pmu_get(struct task_struct *target,
-		      const struct user_regset *regset,
-		      unsigned int pos, unsigned int count,
-		      void *kbuf, void __user *ubuf)
-{
-	/* Build tests */
-	BUILD_BUG_ON(TSO(siar) + sizeof(unsigned long) != TSO(sdar));
-	BUILD_BUG_ON(TSO(sdar) + sizeof(unsigned long) != TSO(sier));
-	BUILD_BUG_ON(TSO(sier) + sizeof(unsigned long) != TSO(mmcr2));
-	BUILD_BUG_ON(TSO(mmcr2) + sizeof(unsigned long) != TSO(mmcr0));
-
-	if (!cpu_has_feature(CPU_FTR_ARCH_207S))
-		return -ENODEV;
-
-	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-			&target->thread.siar, 0,
-			5 * sizeof(unsigned long));
-}
-
-static int pmu_set(struct task_struct *target,
-		      const struct user_regset *regset,
-		      unsigned int pos, unsigned int count,
-		      const void *kbuf, const void __user *ubuf)
-{
-	int ret = 0;
-
-	/* Build tests */
-	BUILD_BUG_ON(TSO(siar) + sizeof(unsigned long) != TSO(sdar));
-	BUILD_BUG_ON(TSO(sdar) + sizeof(unsigned long) != TSO(sier));
-	BUILD_BUG_ON(TSO(sier) + sizeof(unsigned long) != TSO(mmcr2));
-	BUILD_BUG_ON(TSO(mmcr2) + sizeof(unsigned long) != TSO(mmcr0));
-
-	if (!cpu_has_feature(CPU_FTR_ARCH_207S))
-		return -ENODEV;
-
-	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-			&target->thread.siar, 0,
-			sizeof(unsigned long));
-
-	if (!ret)
-		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-			&target->thread.sdar, sizeof(unsigned long),
-			2 * sizeof(unsigned long));
-
-	if (!ret)
-		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-			&target->thread.sier, 2 * sizeof(unsigned long),
-			3 * sizeof(unsigned long));
-
-	if (!ret)
-		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-			&target->thread.mmcr2, 3 * sizeof(unsigned long),
-			4 * sizeof(unsigned long));
-
-	if (!ret)
-		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-			&target->thread.mmcr0, 4 * sizeof(unsigned long),
-			5 * sizeof(unsigned long));
-	return ret;
-}
-#endif
-
-#ifdef CONFIG_PPC_MEM_KEYS
-static int pkey_active(struct task_struct *target,
-		       const struct user_regset *regset)
-{
-	if (!arch_pkeys_enabled())
-		return -ENODEV;
-
-	return regset->n;
-}
-
-static int pkey_get(struct task_struct *target,
-		    const struct user_regset *regset,
-		    unsigned int pos, unsigned int count,
-		    void *kbuf, void __user *ubuf)
-{
-	BUILD_BUG_ON(TSO(amr) + sizeof(unsigned long) != TSO(iamr));
-	BUILD_BUG_ON(TSO(iamr) + sizeof(unsigned long) != TSO(uamor));
-
-	if (!arch_pkeys_enabled())
-		return -ENODEV;
-
-	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-				   &target->thread.amr, 0,
-				   ELF_NPKEY * sizeof(unsigned long));
-}
-
-static int pkey_set(struct task_struct *target,
-		      const struct user_regset *regset,
-		      unsigned int pos, unsigned int count,
-		      const void *kbuf, const void __user *ubuf)
-{
-	u64 new_amr;
-	int ret;
-
-	if (!arch_pkeys_enabled())
-		return -ENODEV;
-
-	/* Only the AMR can be set from userspace */
-	if (pos != 0 || count != sizeof(new_amr))
-		return -EINVAL;
-
-	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-				 &new_amr, 0, sizeof(new_amr));
-	if (ret)
-		return ret;
-
-	/* UAMOR determines which bits of the AMR can be set from userspace. */
-	target->thread.amr = (new_amr & target->thread.uamor) |
-		(target->thread.amr & ~target->thread.uamor);
-
-	return 0;
-}
-#endif /* CONFIG_PPC_MEM_KEYS */
-
-/*
- * These are our native regset flavors.
- */
-enum powerpc_regset {
-	REGSET_GPR,
-	REGSET_FPR,
-#ifdef CONFIG_ALTIVEC
-	REGSET_VMX,
-#endif
-#ifdef CONFIG_VSX
-	REGSET_VSX,
-#endif
-#ifdef CONFIG_SPE
-	REGSET_SPE,
-#endif
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-	REGSET_TM_CGPR,		/* TM checkpointed GPR registers */
-	REGSET_TM_CFPR,		/* TM checkpointed FPR registers */
-	REGSET_TM_CVMX,		/* TM checkpointed VMX registers */
-	REGSET_TM_CVSX,		/* TM checkpointed VSX registers */
-	REGSET_TM_SPR,		/* TM specific SPR registers */
-	REGSET_TM_CTAR,		/* TM checkpointed TAR register */
-	REGSET_TM_CPPR,		/* TM checkpointed PPR register */
-	REGSET_TM_CDSCR,	/* TM checkpointed DSCR register */
-#endif
-#ifdef CONFIG_PPC64
-	REGSET_PPR,		/* PPR register */
-	REGSET_DSCR,		/* DSCR register */
-#endif
-#ifdef CONFIG_PPC_BOOK3S_64
-	REGSET_TAR,		/* TAR register */
-	REGSET_EBB,		/* EBB registers */
-	REGSET_PMR,		/* Performance Monitor Registers */
-#endif
-#ifdef CONFIG_PPC_MEM_KEYS
-	REGSET_PKEY,		/* AMR register */
-#endif
-};
-
-static const struct user_regset native_regsets[] = {
-	[REGSET_GPR] = {
-		.core_note_type = NT_PRSTATUS, .n = ELF_NGREG,
-		.size = sizeof(long), .align = sizeof(long),
-		.get = gpr_get, .set = gpr_set
-	},
-	[REGSET_FPR] = {
-		.core_note_type = NT_PRFPREG, .n = ELF_NFPREG,
-		.size = sizeof(double), .align = sizeof(double),
-		.get = fpr_get, .set = fpr_set
-	},
-#ifdef CONFIG_ALTIVEC
-	[REGSET_VMX] = {
-		.core_note_type = NT_PPC_VMX, .n = 34,
-		.size = sizeof(vector128), .align = sizeof(vector128),
-		.active = vr_active, .get = vr_get, .set = vr_set
-	},
-#endif
-#ifdef CONFIG_VSX
-	[REGSET_VSX] = {
-		.core_note_type = NT_PPC_VSX, .n = 32,
-		.size = sizeof(double), .align = sizeof(double),
-		.active = vsr_active, .get = vsr_get, .set = vsr_set
-	},
-#endif
-#ifdef CONFIG_SPE
-	[REGSET_SPE] = {
-		.core_note_type = NT_PPC_SPE, .n = 35,
-		.size = sizeof(u32), .align = sizeof(u32),
-		.active = evr_active, .get = evr_get, .set = evr_set
-	},
-#endif
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-	[REGSET_TM_CGPR] = {
-		.core_note_type = NT_PPC_TM_CGPR, .n = ELF_NGREG,
-		.size = sizeof(long), .align = sizeof(long),
-		.active = tm_cgpr_active, .get = tm_cgpr_get, .set = tm_cgpr_set
-	},
-	[REGSET_TM_CFPR] = {
-		.core_note_type = NT_PPC_TM_CFPR, .n = ELF_NFPREG,
-		.size = sizeof(double), .align = sizeof(double),
-		.active = tm_cfpr_active, .get = tm_cfpr_get, .set = tm_cfpr_set
-	},
-	[REGSET_TM_CVMX] = {
-		.core_note_type = NT_PPC_TM_CVMX, .n = ELF_NVMX,
-		.size = sizeof(vector128), .align = sizeof(vector128),
-		.active = tm_cvmx_active, .get = tm_cvmx_get, .set = tm_cvmx_set
-	},
-	[REGSET_TM_CVSX] = {
-		.core_note_type = NT_PPC_TM_CVSX, .n = ELF_NVSX,
-		.size = sizeof(double), .align = sizeof(double),
-		.active = tm_cvsx_active, .get = tm_cvsx_get, .set = tm_cvsx_set
-	},
-	[REGSET_TM_SPR] = {
-		.core_note_type = NT_PPC_TM_SPR, .n = ELF_NTMSPRREG,
-		.size = sizeof(u64), .align = sizeof(u64),
-		.active = tm_spr_active, .get = tm_spr_get, .set = tm_spr_set
-	},
-	[REGSET_TM_CTAR] = {
-		.core_note_type = NT_PPC_TM_CTAR, .n = 1,
-		.size = sizeof(u64), .align = sizeof(u64),
-		.active = tm_tar_active, .get = tm_tar_get, .set = tm_tar_set
-	},
-	[REGSET_TM_CPPR] = {
-		.core_note_type = NT_PPC_TM_CPPR, .n = 1,
-		.size = sizeof(u64), .align = sizeof(u64),
-		.active = tm_ppr_active, .get = tm_ppr_get, .set = tm_ppr_set
-	},
-	[REGSET_TM_CDSCR] = {
-		.core_note_type = NT_PPC_TM_CDSCR, .n = 1,
-		.size = sizeof(u64), .align = sizeof(u64),
-		.active = tm_dscr_active, .get = tm_dscr_get, .set = tm_dscr_set
-	},
-#endif
-#ifdef CONFIG_PPC64
-	[REGSET_PPR] = {
-		.core_note_type = NT_PPC_PPR, .n = 1,
-		.size = sizeof(u64), .align = sizeof(u64),
-		.get = ppr_get, .set = ppr_set
-	},
-	[REGSET_DSCR] = {
-		.core_note_type = NT_PPC_DSCR, .n = 1,
-		.size = sizeof(u64), .align = sizeof(u64),
-		.get = dscr_get, .set = dscr_set
-	},
-#endif
-#ifdef CONFIG_PPC_BOOK3S_64
-	[REGSET_TAR] = {
-		.core_note_type = NT_PPC_TAR, .n = 1,
-		.size = sizeof(u64), .align = sizeof(u64),
-		.get = tar_get, .set = tar_set
-	},
-	[REGSET_EBB] = {
-		.core_note_type = NT_PPC_EBB, .n = ELF_NEBB,
-		.size = sizeof(u64), .align = sizeof(u64),
-		.active = ebb_active, .get = ebb_get, .set = ebb_set
-	},
-	[REGSET_PMR] = {
-		.core_note_type = NT_PPC_PMU, .n = ELF_NPMU,
-		.size = sizeof(u64), .align = sizeof(u64),
-		.active = pmu_active, .get = pmu_get, .set = pmu_set
-	},
-#endif
-#ifdef CONFIG_PPC_MEM_KEYS
-	[REGSET_PKEY] = {
-		.core_note_type = NT_PPC_PKEY, .n = ELF_NPKEY,
-		.size = sizeof(u64), .align = sizeof(u64),
-		.active = pkey_active, .get = pkey_get, .set = pkey_set
-	},
-#endif
-};
-
-static const struct user_regset_view user_ppc_native_view = {
-	.name = UTS_MACHINE, .e_machine = ELF_ARCH, .ei_osabi = ELF_OSABI,
-	.regsets = native_regsets, .n = ARRAY_SIZE(native_regsets)
-};
-
-#ifdef CONFIG_PPC64
-#include <linux/compat.h>
-
-static int gpr32_get_common(struct task_struct *target,
-		     const struct user_regset *regset,
-		     unsigned int pos, unsigned int count,
-			    void *kbuf, void __user *ubuf,
-			    unsigned long *regs)
-{
-	compat_ulong_t *k = kbuf;
-	compat_ulong_t __user *u = ubuf;
-	compat_ulong_t reg;
-
-	pos /= sizeof(reg);
-	count /= sizeof(reg);
-
-	if (kbuf)
-		for (; count > 0 && pos < PT_MSR; --count)
-			*k++ = regs[pos++];
-	else
-		for (; count > 0 && pos < PT_MSR; --count)
-			if (__put_user((compat_ulong_t) regs[pos++], u++))
-				return -EFAULT;
-
-	if (count > 0 && pos == PT_MSR) {
-		reg = get_user_msr(target);
-		if (kbuf)
-			*k++ = reg;
-		else if (__put_user(reg, u++))
-			return -EFAULT;
-		++pos;
-		--count;
-	}
-
-	if (kbuf)
-		for (; count > 0 && pos < PT_REGS_COUNT; --count)
-			*k++ = regs[pos++];
-	else
-		for (; count > 0 && pos < PT_REGS_COUNT; --count)
-			if (__put_user((compat_ulong_t) regs[pos++], u++))
-				return -EFAULT;
-
-	kbuf = k;
-	ubuf = u;
-	pos *= sizeof(reg);
-	count *= sizeof(reg);
-	return user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
-					PT_REGS_COUNT * sizeof(reg), -1);
-}
-
-static int gpr32_set_common(struct task_struct *target,
-		     const struct user_regset *regset,
-		     unsigned int pos, unsigned int count,
-		     const void *kbuf, const void __user *ubuf,
-		     unsigned long *regs)
-{
-	const compat_ulong_t *k = kbuf;
-	const compat_ulong_t __user *u = ubuf;
-	compat_ulong_t reg;
-
-	pos /= sizeof(reg);
-	count /= sizeof(reg);
-
-	if (kbuf)
-		for (; count > 0 && pos < PT_MSR; --count)
-			regs[pos++] = *k++;
-	else
-		for (; count > 0 && pos < PT_MSR; --count) {
-			if (__get_user(reg, u++))
-				return -EFAULT;
-			regs[pos++] = reg;
-		}
-
-
-	if (count > 0 && pos == PT_MSR) {
-		if (kbuf)
-			reg = *k++;
-		else if (__get_user(reg, u++))
-			return -EFAULT;
-		set_user_msr(target, reg);
-		++pos;
-		--count;
-	}
-
-	if (kbuf) {
-		for (; count > 0 && pos <= PT_MAX_PUT_REG; --count)
-			regs[pos++] = *k++;
-		for (; count > 0 && pos < PT_TRAP; --count, ++pos)
-			++k;
-	} else {
-		for (; count > 0 && pos <= PT_MAX_PUT_REG; --count) {
-			if (__get_user(reg, u++))
-				return -EFAULT;
-			regs[pos++] = reg;
-		}
-		for (; count > 0 && pos < PT_TRAP; --count, ++pos)
-			if (__get_user(reg, u++))
-				return -EFAULT;
-	}
-
-	if (count > 0 && pos == PT_TRAP) {
-		if (kbuf)
-			reg = *k++;
-		else if (__get_user(reg, u++))
-			return -EFAULT;
-		set_user_trap(target, reg);
-		++pos;
-		--count;
-	}
-
-	kbuf = k;
-	ubuf = u;
-	pos *= sizeof(reg);
-	count *= sizeof(reg);
-	return user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
-					 (PT_TRAP + 1) * sizeof(reg), -1);
-}
-
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-static int tm_cgpr32_get(struct task_struct *target,
-		     const struct user_regset *regset,
-		     unsigned int pos, unsigned int count,
-		     void *kbuf, void __user *ubuf)
-{
-	return gpr32_get_common(target, regset, pos, count, kbuf, ubuf,
-			&target->thread.ckpt_regs.gpr[0]);
-}
-
-static int tm_cgpr32_set(struct task_struct *target,
-		     const struct user_regset *regset,
-		     unsigned int pos, unsigned int count,
-		     const void *kbuf, const void __user *ubuf)
-{
-	return gpr32_set_common(target, regset, pos, count, kbuf, ubuf,
-			&target->thread.ckpt_regs.gpr[0]);
-}
-#endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
-
-static int gpr32_get(struct task_struct *target,
-		     const struct user_regset *regset,
-		     unsigned int pos, unsigned int count,
-		     void *kbuf, void __user *ubuf)
-{
-	int i;
-
-	if (target->thread.regs == NULL)
-		return -EIO;
-
-	if (!FULL_REGS(target->thread.regs)) {
-		/*
-		 * We have a partial register set.
-		 * Fill 14-31 with bogus values.
-		 */
-		for (i = 14; i < 32; i++)
-			target->thread.regs->gpr[i] = NV_REG_POISON;
-	}
-	return gpr32_get_common(target, regset, pos, count, kbuf, ubuf,
-			&target->thread.regs->gpr[0]);
-}
-
-static int gpr32_set(struct task_struct *target,
-		     const struct user_regset *regset,
-		     unsigned int pos, unsigned int count,
-		     const void *kbuf, const void __user *ubuf)
-{
-	if (target->thread.regs == NULL)
-		return -EIO;
-
-	CHECK_FULL_REGS(target->thread.regs);
-	return gpr32_set_common(target, regset, pos, count, kbuf, ubuf,
-			&target->thread.regs->gpr[0]);
-}
-
-/*
- * These are the regset flavors matching the CONFIG_PPC32 native set.
- */
-static const struct user_regset compat_regsets[] = {
-	[REGSET_GPR] = {
-		.core_note_type = NT_PRSTATUS, .n = ELF_NGREG,
-		.size = sizeof(compat_long_t), .align = sizeof(compat_long_t),
-		.get = gpr32_get, .set = gpr32_set
-	},
-	[REGSET_FPR] = {
-		.core_note_type = NT_PRFPREG, .n = ELF_NFPREG,
-		.size = sizeof(double), .align = sizeof(double),
-		.get = fpr_get, .set = fpr_set
-	},
-#ifdef CONFIG_ALTIVEC
-	[REGSET_VMX] = {
-		.core_note_type = NT_PPC_VMX, .n = 34,
-		.size = sizeof(vector128), .align = sizeof(vector128),
-		.active = vr_active, .get = vr_get, .set = vr_set
-	},
-#endif
-#ifdef CONFIG_SPE
-	[REGSET_SPE] = {
-		.core_note_type = NT_PPC_SPE, .n = 35,
-		.size = sizeof(u32), .align = sizeof(u32),
-		.active = evr_active, .get = evr_get, .set = evr_set
-	},
-#endif
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-	[REGSET_TM_CGPR] = {
-		.core_note_type = NT_PPC_TM_CGPR, .n = ELF_NGREG,
-		.size = sizeof(long), .align = sizeof(long),
-		.active = tm_cgpr_active,
-		.get = tm_cgpr32_get, .set = tm_cgpr32_set
-	},
-	[REGSET_TM_CFPR] = {
-		.core_note_type = NT_PPC_TM_CFPR, .n = ELF_NFPREG,
-		.size = sizeof(double), .align = sizeof(double),
-		.active = tm_cfpr_active, .get = tm_cfpr_get, .set = tm_cfpr_set
-	},
-	[REGSET_TM_CVMX] = {
-		.core_note_type = NT_PPC_TM_CVMX, .n = ELF_NVMX,
-		.size = sizeof(vector128), .align = sizeof(vector128),
-		.active = tm_cvmx_active, .get = tm_cvmx_get, .set = tm_cvmx_set
-	},
-	[REGSET_TM_CVSX] = {
-		.core_note_type = NT_PPC_TM_CVSX, .n = ELF_NVSX,
-		.size = sizeof(double), .align = sizeof(double),
-		.active = tm_cvsx_active, .get = tm_cvsx_get, .set = tm_cvsx_set
-	},
-	[REGSET_TM_SPR] = {
-		.core_note_type = NT_PPC_TM_SPR, .n = ELF_NTMSPRREG,
-		.size = sizeof(u64), .align = sizeof(u64),
-		.active = tm_spr_active, .get = tm_spr_get, .set = tm_spr_set
-	},
-	[REGSET_TM_CTAR] = {
-		.core_note_type = NT_PPC_TM_CTAR, .n = 1,
-		.size = sizeof(u64), .align = sizeof(u64),
-		.active = tm_tar_active, .get = tm_tar_get, .set = tm_tar_set
-	},
-	[REGSET_TM_CPPR] = {
-		.core_note_type = NT_PPC_TM_CPPR, .n = 1,
-		.size = sizeof(u64), .align = sizeof(u64),
-		.active = tm_ppr_active, .get = tm_ppr_get, .set = tm_ppr_set
-	},
-	[REGSET_TM_CDSCR] = {
-		.core_note_type = NT_PPC_TM_CDSCR, .n = 1,
-		.size = sizeof(u64), .align = sizeof(u64),
-		.active = tm_dscr_active, .get = tm_dscr_get, .set = tm_dscr_set
-	},
-#endif
-#ifdef CONFIG_PPC64
-	[REGSET_PPR] = {
-		.core_note_type = NT_PPC_PPR, .n = 1,
-		.size = sizeof(u64), .align = sizeof(u64),
-		.get = ppr_get, .set = ppr_set
-	},
-	[REGSET_DSCR] = {
-		.core_note_type = NT_PPC_DSCR, .n = 1,
-		.size = sizeof(u64), .align = sizeof(u64),
-		.get = dscr_get, .set = dscr_set
-	},
-#endif
-#ifdef CONFIG_PPC_BOOK3S_64
-	[REGSET_TAR] = {
-		.core_note_type = NT_PPC_TAR, .n = 1,
-		.size = sizeof(u64), .align = sizeof(u64),
-		.get = tar_get, .set = tar_set
-	},
-	[REGSET_EBB] = {
-		.core_note_type = NT_PPC_EBB, .n = ELF_NEBB,
-		.size = sizeof(u64), .align = sizeof(u64),
-		.active = ebb_active, .get = ebb_get, .set = ebb_set
-	},
-#endif
-};
-
-static const struct user_regset_view user_ppc_compat_view = {
-	.name = "ppc", .e_machine = EM_PPC, .ei_osabi = ELF_OSABI,
-	.regsets = compat_regsets, .n = ARRAY_SIZE(compat_regsets)
-};
-#endif	/* CONFIG_PPC64 */
-
-const struct user_regset_view *task_user_regset_view(struct task_struct *task)
-{
-#ifdef CONFIG_PPC64
-	if (test_tsk_thread_flag(task, TIF_32BIT))
-		return &user_ppc_compat_view;
-#endif
-	return &user_ppc_native_view;
-}
-
-
-void user_enable_single_step(struct task_struct *task)
-{
-	struct pt_regs *regs = task->thread.regs;
-
-	if (regs != NULL) {
-#ifdef CONFIG_PPC_ADV_DEBUG_REGS
-		task->thread.debug.dbcr0 &= ~DBCR0_BT;
-		task->thread.debug.dbcr0 |= DBCR0_IDM | DBCR0_IC;
-		regs->msr |= MSR_DE;
-#else
-		regs->msr &= ~MSR_BE;
-		regs->msr |= MSR_SE;
-#endif
-	}
-	set_tsk_thread_flag(task, TIF_SINGLESTEP);
-}
-
-void user_enable_block_step(struct task_struct *task)
-{
-	struct pt_regs *regs = task->thread.regs;
-
-	if (regs != NULL) {
-#ifdef CONFIG_PPC_ADV_DEBUG_REGS
-		task->thread.debug.dbcr0 &= ~DBCR0_IC;
-		task->thread.debug.dbcr0 = DBCR0_IDM | DBCR0_BT;
-		regs->msr |= MSR_DE;
-#else
-		regs->msr &= ~MSR_SE;
-		regs->msr |= MSR_BE;
-#endif
-	}
-	set_tsk_thread_flag(task, TIF_SINGLESTEP);
-}
-
-void user_disable_single_step(struct task_struct *task)
-{
-	struct pt_regs *regs = task->thread.regs;
-
-	if (regs != NULL) {
-#ifdef CONFIG_PPC_ADV_DEBUG_REGS
-		/*
-		 * The logic to disable single stepping should be as
-		 * simple as turning off the Instruction Complete flag.
-		 * And, after doing so, if all debug flags are off, turn
-		 * off DBCR0(IDM) and MSR(DE) .... Torez
-		 */
-		task->thread.debug.dbcr0 &= ~(DBCR0_IC|DBCR0_BT);
-		/*
-		 * Test to see if any of the DBCR_ACTIVE_EVENTS bits are set.
-		 */
-		if (!DBCR_ACTIVE_EVENTS(task->thread.debug.dbcr0,
-					task->thread.debug.dbcr1)) {
-			/*
-			 * All debug events were off.....
-			 */
-			task->thread.debug.dbcr0 &= ~DBCR0_IDM;
-			regs->msr &= ~MSR_DE;
-		}
-#else
-		regs->msr &= ~(MSR_SE | MSR_BE);
-#endif
-	}
-	clear_tsk_thread_flag(task, TIF_SINGLESTEP);
-}
-
-#ifdef CONFIG_HAVE_HW_BREAKPOINT
-void ptrace_triggered(struct perf_event *bp,
-		      struct perf_sample_data *data, struct pt_regs *regs)
-{
-	struct perf_event_attr attr;
-
-	/*
-	 * Disable the breakpoint request here since ptrace has defined a
-	 * one-shot behaviour for breakpoint exceptions in PPC64.
-	 * The SIGTRAP signal is generated automatically for us in do_dabr().
-	 * We don't have to do anything about that here
-	 */
-	attr = bp->attr;
-	attr.disabled = true;
-	modify_user_hw_breakpoint(bp, &attr);
-}
-#endif /* CONFIG_HAVE_HW_BREAKPOINT */
-
-static int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
-			       unsigned long data)
-{
-#ifdef CONFIG_HAVE_HW_BREAKPOINT
-	int ret;
-	struct thread_struct *thread = &(task->thread);
-	struct perf_event *bp;
-	struct perf_event_attr attr;
-#endif /* CONFIG_HAVE_HW_BREAKPOINT */
-#ifndef CONFIG_PPC_ADV_DEBUG_REGS
-	bool set_bp = true;
-	struct arch_hw_breakpoint hw_brk;
-#endif
-
-	/* For ppc64 we support one DABR and no IABR's at the moment (ppc64).
-	 *  For embedded processors we support one DAC and no IAC's at the
-	 *  moment.
-	 */
-	if (addr > 0)
-		return -EINVAL;
-
-	/* The bottom 3 bits in dabr are flags */
-	if ((data & ~0x7UL) >= TASK_SIZE)
-		return -EIO;
-
-#ifndef CONFIG_PPC_ADV_DEBUG_REGS
-	/* For processors using DABR (i.e. 970), the bottom 3 bits are flags.
-	 *  It was assumed, on previous implementations, that 3 bits were
-	 *  passed together with the data address, fitting the design of the
-	 *  DABR register, as follows:
-	 *
-	 *  bit 0: Read flag
-	 *  bit 1: Write flag
-	 *  bit 2: Breakpoint translation
-	 *
-	 *  Thus, we use them here as so.
-	 */
-
-	/* Ensure breakpoint translation bit is set */
-	if (data && !(data & HW_BRK_TYPE_TRANSLATE))
-		return -EIO;
-	hw_brk.address = data & (~HW_BRK_TYPE_DABR);
-	hw_brk.type = (data & HW_BRK_TYPE_DABR) | HW_BRK_TYPE_PRIV_ALL;
-	hw_brk.len = DABR_MAX_LEN;
-	hw_brk.hw_len = DABR_MAX_LEN;
-	set_bp = (data) && (hw_brk.type & HW_BRK_TYPE_RDWR);
-#ifdef CONFIG_HAVE_HW_BREAKPOINT
-	bp = thread->ptrace_bps[0];
-	if (!set_bp) {
-		if (bp) {
-			unregister_hw_breakpoint(bp);
-			thread->ptrace_bps[0] = NULL;
-		}
-		return 0;
-	}
-	if (bp) {
-		attr = bp->attr;
-		attr.bp_addr = hw_brk.address;
-		attr.bp_len = DABR_MAX_LEN;
-		arch_bp_generic_fields(hw_brk.type, &attr.bp_type);
-
-		/* Enable breakpoint */
-		attr.disabled = false;
-
-		ret =  modify_user_hw_breakpoint(bp, &attr);
-		if (ret) {
-			return ret;
-		}
-		thread->ptrace_bps[0] = bp;
-		thread->hw_brk = hw_brk;
-		return 0;
-	}
-
-	/* Create a new breakpoint request if one doesn't exist already */
-	hw_breakpoint_init(&attr);
-	attr.bp_addr = hw_brk.address;
-	attr.bp_len = DABR_MAX_LEN;
-	arch_bp_generic_fields(hw_brk.type,
-			       &attr.bp_type);
-
-	thread->ptrace_bps[0] = bp = register_user_hw_breakpoint(&attr,
-					       ptrace_triggered, NULL, task);
-	if (IS_ERR(bp)) {
-		thread->ptrace_bps[0] = NULL;
-		return PTR_ERR(bp);
-	}
-
-#else /* !CONFIG_HAVE_HW_BREAKPOINT */
-	if (set_bp && (!ppc_breakpoint_available()))
-		return -ENODEV;
-#endif /* CONFIG_HAVE_HW_BREAKPOINT */
-	task->thread.hw_brk = hw_brk;
-#else /* CONFIG_PPC_ADV_DEBUG_REGS */
-	/* As described above, it was assumed 3 bits were passed with the data
-	 *  address, but we will assume only the mode bits will be passed
-	 *  as to not cause alignment restrictions for DAC-based processors.
-	 */
-
-	/* DAC's hold the whole address without any mode flags */
-	task->thread.debug.dac1 = data & ~0x3UL;
-
-	if (task->thread.debug.dac1 == 0) {
-		dbcr_dac(task) &= ~(DBCR_DAC1R | DBCR_DAC1W);
-		if (!DBCR_ACTIVE_EVENTS(task->thread.debug.dbcr0,
-					task->thread.debug.dbcr1)) {
-			task->thread.regs->msr &= ~MSR_DE;
-			task->thread.debug.dbcr0 &= ~DBCR0_IDM;
-		}
-		return 0;
-	}
-
-	/* Read or Write bits must be set */
-
-	if (!(data & 0x3UL))
-		return -EINVAL;
-
-	/* Set the Internal Debugging flag (IDM bit 1) for the DBCR0
-	   register */
-	task->thread.debug.dbcr0 |= DBCR0_IDM;
-
-	/* Check for write and read flags and set DBCR0
-	   accordingly */
-	dbcr_dac(task) &= ~(DBCR_DAC1R|DBCR_DAC1W);
-	if (data & 0x1UL)
-		dbcr_dac(task) |= DBCR_DAC1R;
-	if (data & 0x2UL)
-		dbcr_dac(task) |= DBCR_DAC1W;
-	task->thread.regs->msr |= MSR_DE;
-#endif /* CONFIG_PPC_ADV_DEBUG_REGS */
-	return 0;
-}
-
-/*
- * Called by kernel/ptrace.c when detaching..
- *
- * Make sure single step bits etc are not set.
- */
-void ptrace_disable(struct task_struct *child)
-{
-	/* make sure the single step bit is not set. */
-	user_disable_single_step(child);
-}
-
-#ifdef CONFIG_PPC_ADV_DEBUG_REGS
-static long set_instruction_bp(struct task_struct *child,
-			      struct ppc_hw_breakpoint *bp_info)
-{
-	int slot;
-	int slot1_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC1) != 0);
-	int slot2_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC2) != 0);
-	int slot3_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC3) != 0);
-	int slot4_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC4) != 0);
-
-	if (dbcr_iac_range(child) & DBCR_IAC12MODE)
-		slot2_in_use = 1;
-	if (dbcr_iac_range(child) & DBCR_IAC34MODE)
-		slot4_in_use = 1;
-
-	if (bp_info->addr >= TASK_SIZE)
-		return -EIO;
-
-	if (bp_info->addr_mode != PPC_BREAKPOINT_MODE_EXACT) {
-
-		/* Make sure range is valid. */
-		if (bp_info->addr2 >= TASK_SIZE)
-			return -EIO;
-
-		/* We need a pair of IAC regsisters */
-		if ((!slot1_in_use) && (!slot2_in_use)) {
-			slot = 1;
-			child->thread.debug.iac1 = bp_info->addr;
-			child->thread.debug.iac2 = bp_info->addr2;
-			child->thread.debug.dbcr0 |= DBCR0_IAC1;
-			if (bp_info->addr_mode ==
-					PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE)
-				dbcr_iac_range(child) |= DBCR_IAC12X;
-			else
-				dbcr_iac_range(child) |= DBCR_IAC12I;
-#if CONFIG_PPC_ADV_DEBUG_IACS > 2
-		} else if ((!slot3_in_use) && (!slot4_in_use)) {
-			slot = 3;
-			child->thread.debug.iac3 = bp_info->addr;
-			child->thread.debug.iac4 = bp_info->addr2;
-			child->thread.debug.dbcr0 |= DBCR0_IAC3;
-			if (bp_info->addr_mode ==
-					PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE)
-				dbcr_iac_range(child) |= DBCR_IAC34X;
-			else
-				dbcr_iac_range(child) |= DBCR_IAC34I;
-#endif
-		} else
-			return -ENOSPC;
-	} else {
-		/* We only need one.  If possible leave a pair free in
-		 * case a range is needed later
-		 */
-		if (!slot1_in_use) {
-			/*
-			 * Don't use iac1 if iac1-iac2 are free and either
-			 * iac3 or iac4 (but not both) are free
-			 */
-			if (slot2_in_use || (slot3_in_use == slot4_in_use)) {
-				slot = 1;
-				child->thread.debug.iac1 = bp_info->addr;
-				child->thread.debug.dbcr0 |= DBCR0_IAC1;
-				goto out;
-			}
-		}
-		if (!slot2_in_use) {
-			slot = 2;
-			child->thread.debug.iac2 = bp_info->addr;
-			child->thread.debug.dbcr0 |= DBCR0_IAC2;
-#if CONFIG_PPC_ADV_DEBUG_IACS > 2
-		} else if (!slot3_in_use) {
-			slot = 3;
-			child->thread.debug.iac3 = bp_info->addr;
-			child->thread.debug.dbcr0 |= DBCR0_IAC3;
-		} else if (!slot4_in_use) {
-			slot = 4;
-			child->thread.debug.iac4 = bp_info->addr;
-			child->thread.debug.dbcr0 |= DBCR0_IAC4;
-#endif
-		} else
-			return -ENOSPC;
-	}
-out:
-	child->thread.debug.dbcr0 |= DBCR0_IDM;
-	child->thread.regs->msr |= MSR_DE;
-
-	return slot;
-}
-
-static int del_instruction_bp(struct task_struct *child, int slot)
-{
-	switch (slot) {
-	case 1:
-		if ((child->thread.debug.dbcr0 & DBCR0_IAC1) == 0)
-			return -ENOENT;
-
-		if (dbcr_iac_range(child) & DBCR_IAC12MODE) {
-			/* address range - clear slots 1 & 2 */
-			child->thread.debug.iac2 = 0;
-			dbcr_iac_range(child) &= ~DBCR_IAC12MODE;
-		}
-		child->thread.debug.iac1 = 0;
-		child->thread.debug.dbcr0 &= ~DBCR0_IAC1;
-		break;
-	case 2:
-		if ((child->thread.debug.dbcr0 & DBCR0_IAC2) == 0)
-			return -ENOENT;
-
-		if (dbcr_iac_range(child) & DBCR_IAC12MODE)
-			/* used in a range */
-			return -EINVAL;
-		child->thread.debug.iac2 = 0;
-		child->thread.debug.dbcr0 &= ~DBCR0_IAC2;
-		break;
-#if CONFIG_PPC_ADV_DEBUG_IACS > 2
-	case 3:
-		if ((child->thread.debug.dbcr0 & DBCR0_IAC3) == 0)
-			return -ENOENT;
-
-		if (dbcr_iac_range(child) & DBCR_IAC34MODE) {
-			/* address range - clear slots 3 & 4 */
-			child->thread.debug.iac4 = 0;
-			dbcr_iac_range(child) &= ~DBCR_IAC34MODE;
-		}
-		child->thread.debug.iac3 = 0;
-		child->thread.debug.dbcr0 &= ~DBCR0_IAC3;
-		break;
-	case 4:
-		if ((child->thread.debug.dbcr0 & DBCR0_IAC4) == 0)
-			return -ENOENT;
-
-		if (dbcr_iac_range(child) & DBCR_IAC34MODE)
-			/* Used in a range */
-			return -EINVAL;
-		child->thread.debug.iac4 = 0;
-		child->thread.debug.dbcr0 &= ~DBCR0_IAC4;
-		break;
-#endif
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static int set_dac(struct task_struct *child, struct ppc_hw_breakpoint *bp_info)
-{
-	int byte_enable =
-		(bp_info->condition_mode >> PPC_BREAKPOINT_CONDITION_BE_SHIFT)
-		& 0xf;
-	int condition_mode =
-		bp_info->condition_mode & PPC_BREAKPOINT_CONDITION_MODE;
-	int slot;
-
-	if (byte_enable && (condition_mode == 0))
-		return -EINVAL;
-
-	if (bp_info->addr >= TASK_SIZE)
-		return -EIO;
-
-	if ((dbcr_dac(child) & (DBCR_DAC1R | DBCR_DAC1W)) == 0) {
-		slot = 1;
-		if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
-			dbcr_dac(child) |= DBCR_DAC1R;
-		if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
-			dbcr_dac(child) |= DBCR_DAC1W;
-		child->thread.debug.dac1 = (unsigned long)bp_info->addr;
-#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
-		if (byte_enable) {
-			child->thread.debug.dvc1 =
-				(unsigned long)bp_info->condition_value;
-			child->thread.debug.dbcr2 |=
-				((byte_enable << DBCR2_DVC1BE_SHIFT) |
-				 (condition_mode << DBCR2_DVC1M_SHIFT));
-		}
-#endif
-#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
-	} else if (child->thread.debug.dbcr2 & DBCR2_DAC12MODE) {
-		/* Both dac1 and dac2 are part of a range */
-		return -ENOSPC;
-#endif
-	} else if ((dbcr_dac(child) & (DBCR_DAC2R | DBCR_DAC2W)) == 0) {
-		slot = 2;
-		if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
-			dbcr_dac(child) |= DBCR_DAC2R;
-		if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
-			dbcr_dac(child) |= DBCR_DAC2W;
-		child->thread.debug.dac2 = (unsigned long)bp_info->addr;
-#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
-		if (byte_enable) {
-			child->thread.debug.dvc2 =
-				(unsigned long)bp_info->condition_value;
-			child->thread.debug.dbcr2 |=
-				((byte_enable << DBCR2_DVC2BE_SHIFT) |
-				 (condition_mode << DBCR2_DVC2M_SHIFT));
-		}
-#endif
-	} else
-		return -ENOSPC;
-	child->thread.debug.dbcr0 |= DBCR0_IDM;
-	child->thread.regs->msr |= MSR_DE;
-
-	return slot + 4;
-}
-
-static int del_dac(struct task_struct *child, int slot)
-{
-	if (slot == 1) {
-		if ((dbcr_dac(child) & (DBCR_DAC1R | DBCR_DAC1W)) == 0)
-			return -ENOENT;
-
-		child->thread.debug.dac1 = 0;
-		dbcr_dac(child) &= ~(DBCR_DAC1R | DBCR_DAC1W);
-#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
-		if (child->thread.debug.dbcr2 & DBCR2_DAC12MODE) {
-			child->thread.debug.dac2 = 0;
-			child->thread.debug.dbcr2 &= ~DBCR2_DAC12MODE;
-		}
-		child->thread.debug.dbcr2 &= ~(DBCR2_DVC1M | DBCR2_DVC1BE);
-#endif
-#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
-		child->thread.debug.dvc1 = 0;
-#endif
-	} else if (slot == 2) {
-		if ((dbcr_dac(child) & (DBCR_DAC2R | DBCR_DAC2W)) == 0)
-			return -ENOENT;
-
-#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
-		if (child->thread.debug.dbcr2 & DBCR2_DAC12MODE)
-			/* Part of a range */
-			return -EINVAL;
-		child->thread.debug.dbcr2 &= ~(DBCR2_DVC2M | DBCR2_DVC2BE);
-#endif
-#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
-		child->thread.debug.dvc2 = 0;
-#endif
-		child->thread.debug.dac2 = 0;
-		dbcr_dac(child) &= ~(DBCR_DAC2R | DBCR_DAC2W);
-	} else
-		return -EINVAL;
-
-	return 0;
-}
-#endif /* CONFIG_PPC_ADV_DEBUG_REGS */
-
-#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
-static int set_dac_range(struct task_struct *child,
-			 struct ppc_hw_breakpoint *bp_info)
-{
-	int mode = bp_info->addr_mode & PPC_BREAKPOINT_MODE_MASK;
-
-	/* We don't allow range watchpoints to be used with DVC */
-	if (bp_info->condition_mode)
-		return -EINVAL;
-
-	/*
-	 * Best effort to verify the address range.  The user/supervisor bits
-	 * prevent trapping in kernel space, but let's fail on an obvious bad
-	 * range.  The simple test on the mask is not fool-proof, and any
-	 * exclusive range will spill over into kernel space.
-	 */
-	if (bp_info->addr >= TASK_SIZE)
-		return -EIO;
-	if (mode == PPC_BREAKPOINT_MODE_MASK) {
-		/*
-		 * dac2 is a bitmask.  Don't allow a mask that makes a
-		 * kernel space address from a valid dac1 value
-		 */
-		if (~((unsigned long)bp_info->addr2) >= TASK_SIZE)
-			return -EIO;
-	} else {
-		/*
-		 * For range breakpoints, addr2 must also be a valid address
-		 */
-		if (bp_info->addr2 >= TASK_SIZE)
-			return -EIO;
-	}
-
-	if (child->thread.debug.dbcr0 &
-	    (DBCR0_DAC1R | DBCR0_DAC1W | DBCR0_DAC2R | DBCR0_DAC2W))
-		return -ENOSPC;
-
-	if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
-		child->thread.debug.dbcr0 |= (DBCR0_DAC1R | DBCR0_IDM);
-	if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
-		child->thread.debug.dbcr0 |= (DBCR0_DAC1W | DBCR0_IDM);
-	child->thread.debug.dac1 = bp_info->addr;
-	child->thread.debug.dac2 = bp_info->addr2;
-	if (mode == PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE)
-		child->thread.debug.dbcr2  |= DBCR2_DAC12M;
-	else if (mode == PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE)
-		child->thread.debug.dbcr2  |= DBCR2_DAC12MX;
-	else	/* PPC_BREAKPOINT_MODE_MASK */
-		child->thread.debug.dbcr2  |= DBCR2_DAC12MM;
-	child->thread.regs->msr |= MSR_DE;
-
-	return 5;
-}
-#endif /* CONFIG_PPC_ADV_DEBUG_DAC_RANGE */
-
-static long ppc_set_hwdebug(struct task_struct *child,
-		     struct ppc_hw_breakpoint *bp_info)
-{
-#ifdef CONFIG_HAVE_HW_BREAKPOINT
-	int len = 0;
-	struct thread_struct *thread = &(child->thread);
-	struct perf_event *bp;
-	struct perf_event_attr attr;
-#endif /* CONFIG_HAVE_HW_BREAKPOINT */
-#ifndef CONFIG_PPC_ADV_DEBUG_REGS
-	struct arch_hw_breakpoint brk;
-#endif
-
-	if (bp_info->version != 1)
-		return -ENOTSUPP;
-#ifdef CONFIG_PPC_ADV_DEBUG_REGS
-	/*
-	 * Check for invalid flags and combinations
-	 */
-	if ((bp_info->trigger_type == 0) ||
-	    (bp_info->trigger_type & ~(PPC_BREAKPOINT_TRIGGER_EXECUTE |
-				       PPC_BREAKPOINT_TRIGGER_RW)) ||
-	    (bp_info->addr_mode & ~PPC_BREAKPOINT_MODE_MASK) ||
-	    (bp_info->condition_mode &
-	     ~(PPC_BREAKPOINT_CONDITION_MODE |
-	       PPC_BREAKPOINT_CONDITION_BE_ALL)))
-		return -EINVAL;
-#if CONFIG_PPC_ADV_DEBUG_DVCS == 0
-	if (bp_info->condition_mode != PPC_BREAKPOINT_CONDITION_NONE)
-		return -EINVAL;
-#endif
-
-	if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_EXECUTE) {
-		if ((bp_info->trigger_type != PPC_BREAKPOINT_TRIGGER_EXECUTE) ||
-		    (bp_info->condition_mode != PPC_BREAKPOINT_CONDITION_NONE))
-			return -EINVAL;
-		return set_instruction_bp(child, bp_info);
-	}
-	if (bp_info->addr_mode == PPC_BREAKPOINT_MODE_EXACT)
-		return set_dac(child, bp_info);
-
-#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
-	return set_dac_range(child, bp_info);
-#else
-	return -EINVAL;
-#endif
-#else /* !CONFIG_PPC_ADV_DEBUG_DVCS */
-	/*
-	 * We only support one data breakpoint
-	 */
-	if ((bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_RW) == 0 ||
-	    (bp_info->trigger_type & ~PPC_BREAKPOINT_TRIGGER_RW) != 0 ||
-	    bp_info->condition_mode != PPC_BREAKPOINT_CONDITION_NONE)
-		return -EINVAL;
-
-	if ((unsigned long)bp_info->addr >= TASK_SIZE)
-		return -EIO;
-
-	brk.address = bp_info->addr & ~HW_BREAKPOINT_ALIGN;
-	brk.type = HW_BRK_TYPE_TRANSLATE;
-	brk.len = DABR_MAX_LEN;
-	if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
-		brk.type |= HW_BRK_TYPE_READ;
-	if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
-		brk.type |= HW_BRK_TYPE_WRITE;
-#ifdef CONFIG_HAVE_HW_BREAKPOINT
-	if (bp_info->addr_mode == PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE)
-		len = bp_info->addr2 - bp_info->addr;
-	else if (bp_info->addr_mode == PPC_BREAKPOINT_MODE_EXACT)
-		len = 1;
-	else
-		return -EINVAL;
-	bp = thread->ptrace_bps[0];
-	if (bp)
-		return -ENOSPC;
-
-	/* Create a new breakpoint request if one doesn't exist already */
-	hw_breakpoint_init(&attr);
-	attr.bp_addr = (unsigned long)bp_info->addr;
-	attr.bp_len = len;
-	arch_bp_generic_fields(brk.type, &attr.bp_type);
-
-	thread->ptrace_bps[0] = bp = register_user_hw_breakpoint(&attr,
-					       ptrace_triggered, NULL, child);
-	if (IS_ERR(bp)) {
-		thread->ptrace_bps[0] = NULL;
-		return PTR_ERR(bp);
-	}
-
-	return 1;
-#endif /* CONFIG_HAVE_HW_BREAKPOINT */
-
-	if (bp_info->addr_mode != PPC_BREAKPOINT_MODE_EXACT)
-		return -EINVAL;
-
-	if (child->thread.hw_brk.address)
-		return -ENOSPC;
-
-	if (!ppc_breakpoint_available())
-		return -ENODEV;
-
-	child->thread.hw_brk = brk;
-
-	return 1;
-#endif /* !CONFIG_PPC_ADV_DEBUG_DVCS */
-}
-
-static long ppc_del_hwdebug(struct task_struct *child, long data)
-{
-#ifdef CONFIG_HAVE_HW_BREAKPOINT
-	int ret = 0;
-	struct thread_struct *thread = &(child->thread);
-	struct perf_event *bp;
-#endif /* CONFIG_HAVE_HW_BREAKPOINT */
-#ifdef CONFIG_PPC_ADV_DEBUG_REGS
-	int rc;
-
-	if (data <= 4)
-		rc = del_instruction_bp(child, (int)data);
-	else
-		rc = del_dac(child, (int)data - 4);
-
-	if (!rc) {
-		if (!DBCR_ACTIVE_EVENTS(child->thread.debug.dbcr0,
-					child->thread.debug.dbcr1)) {
-			child->thread.debug.dbcr0 &= ~DBCR0_IDM;
-			child->thread.regs->msr &= ~MSR_DE;
-		}
-	}
-	return rc;
-#else
-	if (data != 1)
-		return -EINVAL;
-
-#ifdef CONFIG_HAVE_HW_BREAKPOINT
-	bp = thread->ptrace_bps[0];
-	if (bp) {
-		unregister_hw_breakpoint(bp);
-		thread->ptrace_bps[0] = NULL;
-	} else
-		ret = -ENOENT;
-	return ret;
-#else /* CONFIG_HAVE_HW_BREAKPOINT */
-	if (child->thread.hw_brk.address == 0)
-		return -ENOENT;
-
-	child->thread.hw_brk.address = 0;
-	child->thread.hw_brk.type = 0;
-#endif /* CONFIG_HAVE_HW_BREAKPOINT */
-
-	return 0;
-#endif
-}
-
-long arch_ptrace(struct task_struct *child, long request,
-		 unsigned long addr, unsigned long data)
-{
-	int ret = -EPERM;
-	void __user *datavp = (void __user *) data;
-	unsigned long __user *datalp = datavp;
-
-	switch (request) {
-	/* read the word at location addr in the USER area. */
-	case PTRACE_PEEKUSR: {
-		unsigned long index, tmp;
-
-		ret = -EIO;
-		/* convert to index and check */
-#ifdef CONFIG_PPC32
-		index = addr >> 2;
-		if ((addr & 3) || (index > PT_FPSCR)
-		    || (child->thread.regs == NULL))
-#else
-		index = addr >> 3;
-		if ((addr & 7) || (index > PT_FPSCR))
-#endif
-			break;
-
-		CHECK_FULL_REGS(child->thread.regs);
-		if (index < PT_FPR0) {
-			ret = ptrace_get_reg(child, (int) index, &tmp);
-			if (ret)
-				break;
-		} else {
-			unsigned int fpidx = index - PT_FPR0;
-
-			flush_fp_to_thread(child);
-			if (fpidx < (PT_FPSCR - PT_FPR0))
-				memcpy(&tmp, &child->thread.TS_FPR(fpidx),
-				       sizeof(long));
-			else
-				tmp = child->thread.fp_state.fpscr;
-		}
-		ret = put_user(tmp, datalp);
-		break;
-	}
-
-	/* write the word at location addr in the USER area */
-	case PTRACE_POKEUSR: {
-		unsigned long index;
-
-		ret = -EIO;
-		/* convert to index and check */
-#ifdef CONFIG_PPC32
-		index = addr >> 2;
-		if ((addr & 3) || (index > PT_FPSCR)
-		    || (child->thread.regs == NULL))
-#else
-		index = addr >> 3;
-		if ((addr & 7) || (index > PT_FPSCR))
-#endif
-			break;
-
-		CHECK_FULL_REGS(child->thread.regs);
-		if (index < PT_FPR0) {
-			ret = ptrace_put_reg(child, index, data);
-		} else {
-			unsigned int fpidx = index - PT_FPR0;
-
-			flush_fp_to_thread(child);
-			if (fpidx < (PT_FPSCR - PT_FPR0))
-				memcpy(&child->thread.TS_FPR(fpidx), &data,
-				       sizeof(long));
-			else
-				child->thread.fp_state.fpscr = data;
-			ret = 0;
-		}
-		break;
-	}
-
-	case PPC_PTRACE_GETHWDBGINFO: {
-		struct ppc_debug_info dbginfo;
-
-		dbginfo.version = 1;
-#ifdef CONFIG_PPC_ADV_DEBUG_REGS
-		dbginfo.num_instruction_bps = CONFIG_PPC_ADV_DEBUG_IACS;
-		dbginfo.num_data_bps = CONFIG_PPC_ADV_DEBUG_DACS;
-		dbginfo.num_condition_regs = CONFIG_PPC_ADV_DEBUG_DVCS;
-		dbginfo.data_bp_alignment = 4;
-		dbginfo.sizeof_condition = 4;
-		dbginfo.features = PPC_DEBUG_FEATURE_INSN_BP_RANGE |
-				   PPC_DEBUG_FEATURE_INSN_BP_MASK;
-#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
-		dbginfo.features |=
-				   PPC_DEBUG_FEATURE_DATA_BP_RANGE |
-				   PPC_DEBUG_FEATURE_DATA_BP_MASK;
-#endif
-#else /* !CONFIG_PPC_ADV_DEBUG_REGS */
-		dbginfo.num_instruction_bps = 0;
-		if (ppc_breakpoint_available())
-			dbginfo.num_data_bps = 1;
-		else
-			dbginfo.num_data_bps = 0;
-		dbginfo.num_condition_regs = 0;
-#ifdef CONFIG_PPC64
-		dbginfo.data_bp_alignment = 8;
-#else
-		dbginfo.data_bp_alignment = 4;
-#endif
-		dbginfo.sizeof_condition = 0;
-#ifdef CONFIG_HAVE_HW_BREAKPOINT
-		dbginfo.features = PPC_DEBUG_FEATURE_DATA_BP_RANGE;
-		if (dawr_enabled())
-			dbginfo.features |= PPC_DEBUG_FEATURE_DATA_BP_DAWR;
-#else
-		dbginfo.features = 0;
-#endif /* CONFIG_HAVE_HW_BREAKPOINT */
-#endif /* CONFIG_PPC_ADV_DEBUG_REGS */
-
-		if (copy_to_user(datavp, &dbginfo,
-				 sizeof(struct ppc_debug_info)))
-			return -EFAULT;
-		return 0;
-	}
-
-	case PPC_PTRACE_SETHWDEBUG: {
-		struct ppc_hw_breakpoint bp_info;
-
-		if (copy_from_user(&bp_info, datavp,
-				   sizeof(struct ppc_hw_breakpoint)))
-			return -EFAULT;
-		return ppc_set_hwdebug(child, &bp_info);
-	}
-
-	case PPC_PTRACE_DELHWDEBUG: {
-		ret = ppc_del_hwdebug(child, data);
-		break;
-	}
-
-	case PTRACE_GET_DEBUGREG: {
-#ifndef CONFIG_PPC_ADV_DEBUG_REGS
-		unsigned long dabr_fake;
-#endif
-		ret = -EINVAL;
-		/* We only support one DABR and no IABRS at the moment */
-		if (addr > 0)
-			break;
-#ifdef CONFIG_PPC_ADV_DEBUG_REGS
-		ret = put_user(child->thread.debug.dac1, datalp);
-#else
-		dabr_fake = ((child->thread.hw_brk.address & (~HW_BRK_TYPE_DABR)) |
-			     (child->thread.hw_brk.type & HW_BRK_TYPE_DABR));
-		ret = put_user(dabr_fake, datalp);
-#endif
-		break;
-	}
-
-	case PTRACE_SET_DEBUGREG:
-		ret = ptrace_set_debugreg(child, addr, data);
-		break;
-
-#ifdef CONFIG_PPC64
-	case PTRACE_GETREGS64:
-#endif
-	case PTRACE_GETREGS:	/* Get all pt_regs from the child. */
-		return copy_regset_to_user(child, &user_ppc_native_view,
-					   REGSET_GPR,
-					   0, sizeof(struct user_pt_regs),
-					   datavp);
-
-#ifdef CONFIG_PPC64
-	case PTRACE_SETREGS64:
-#endif
-	case PTRACE_SETREGS:	/* Set all gp regs in the child. */
-		return copy_regset_from_user(child, &user_ppc_native_view,
-					     REGSET_GPR,
-					     0, sizeof(struct user_pt_regs),
-					     datavp);
-
-	case PTRACE_GETFPREGS: /* Get the child FPU state (FPR0...31 + FPSCR) */
-		return copy_regset_to_user(child, &user_ppc_native_view,
-					   REGSET_FPR,
-					   0, sizeof(elf_fpregset_t),
-					   datavp);
-
-	case PTRACE_SETFPREGS: /* Set the child FPU state (FPR0...31 + FPSCR) */
-		return copy_regset_from_user(child, &user_ppc_native_view,
-					     REGSET_FPR,
-					     0, sizeof(elf_fpregset_t),
-					     datavp);
-
-#ifdef CONFIG_ALTIVEC
-	case PTRACE_GETVRREGS:
-		return copy_regset_to_user(child, &user_ppc_native_view,
-					   REGSET_VMX,
-					   0, (33 * sizeof(vector128) +
-					       sizeof(u32)),
-					   datavp);
-
-	case PTRACE_SETVRREGS:
-		return copy_regset_from_user(child, &user_ppc_native_view,
-					     REGSET_VMX,
-					     0, (33 * sizeof(vector128) +
-						 sizeof(u32)),
-					     datavp);
-#endif
-#ifdef CONFIG_VSX
-	case PTRACE_GETVSRREGS:
-		return copy_regset_to_user(child, &user_ppc_native_view,
-					   REGSET_VSX,
-					   0, 32 * sizeof(double),
-					   datavp);
-
-	case PTRACE_SETVSRREGS:
-		return copy_regset_from_user(child, &user_ppc_native_view,
-					     REGSET_VSX,
-					     0, 32 * sizeof(double),
-					     datavp);
-#endif
-#ifdef CONFIG_SPE
-	case PTRACE_GETEVRREGS:
-		/* Get the child spe register state. */
-		return copy_regset_to_user(child, &user_ppc_native_view,
-					   REGSET_SPE, 0, 35 * sizeof(u32),
-					   datavp);
-
-	case PTRACE_SETEVRREGS:
-		/* Set the child spe register state. */
-		return copy_regset_from_user(child, &user_ppc_native_view,
-					     REGSET_SPE, 0, 35 * sizeof(u32),
-					     datavp);
-#endif
-
-	default:
-		ret = ptrace_request(child, request, addr, data);
-		break;
-	}
-	return ret;
-}
-
-#ifdef CONFIG_SECCOMP
-static int do_seccomp(struct pt_regs *regs)
-{
-	if (!test_thread_flag(TIF_SECCOMP))
-		return 0;
-
-	/*
-	 * The ABI we present to seccomp tracers is that r3 contains
-	 * the syscall return value and orig_gpr3 contains the first
-	 * syscall parameter. This is different to the ptrace ABI where
-	 * both r3 and orig_gpr3 contain the first syscall parameter.
-	 */
-	regs->gpr[3] = -ENOSYS;
-
-	/*
-	 * We use the __ version here because we have already checked
-	 * TIF_SECCOMP. If this fails, there is nothing left to do, we
-	 * have already loaded -ENOSYS into r3, or seccomp has put
-	 * something else in r3 (via SECCOMP_RET_ERRNO/TRACE).
-	 */
-	if (__secure_computing(NULL))
-		return -1;
-
-	/*
-	 * The syscall was allowed by seccomp, restore the register
-	 * state to what audit expects.
-	 * Note that we use orig_gpr3, which means a seccomp tracer can
-	 * modify the first syscall parameter (in orig_gpr3) and also
-	 * allow the syscall to proceed.
-	 */
-	regs->gpr[3] = regs->orig_gpr3;
-
-	return 0;
-}
-#else
-static inline int do_seccomp(struct pt_regs *regs) { return 0; }
-#endif /* CONFIG_SECCOMP */
-
-/**
- * do_syscall_trace_enter() - Do syscall tracing on kernel entry.
- * @regs: the pt_regs of the task to trace (current)
- *
- * Performs various types of tracing on syscall entry. This includes seccomp,
- * ptrace, syscall tracepoints and audit.
- *
- * The pt_regs are potentially visible to userspace via ptrace, so their
- * contents is ABI.
- *
- * One or more of the tracers may modify the contents of pt_regs, in particular
- * to modify arguments or even the syscall number itself.
- *
- * It's also possible that a tracer can choose to reject the system call. In
- * that case this function will return an illegal syscall number, and will put
- * an appropriate return value in regs->r3.
- *
- * Return: the (possibly changed) syscall number.
- */
-long do_syscall_trace_enter(struct pt_regs *regs)
-{
-	u32 flags;
-
-	user_exit();
-
-	flags = READ_ONCE(current_thread_info()->flags) &
-		(_TIF_SYSCALL_EMU | _TIF_SYSCALL_TRACE);
-
-	if (flags) {
-		int rc = tracehook_report_syscall_entry(regs);
-
-		if (unlikely(flags & _TIF_SYSCALL_EMU)) {
-			/*
-			 * A nonzero return code from
-			 * tracehook_report_syscall_entry() tells us to prevent
-			 * the syscall execution, but we are not going to
-			 * execute it anyway.
-			 *
-			 * Returning -1 will skip the syscall execution. We want
-			 * to avoid clobbering any registers, so we don't goto
-			 * the skip label below.
-			 */
-			return -1;
-		}
-
-		if (rc) {
-			/*
-			 * The tracer decided to abort the syscall. Note that
-			 * the tracer may also just change regs->gpr[0] to an
-			 * invalid syscall number, that is handled below on the
-			 * exit path.
-			 */
-			goto skip;
-		}
-	}
-
-	/* Run seccomp after ptrace; allow it to set gpr[3]. */
-	if (do_seccomp(regs))
-		return -1;
-
-	/* Avoid trace and audit when syscall is invalid. */
-	if (regs->gpr[0] >= NR_syscalls)
-		goto skip;
-
-	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
-		trace_sys_enter(regs, regs->gpr[0]);
-
-#ifdef CONFIG_PPC64
-	if (!is_32bit_task())
-		audit_syscall_entry(regs->gpr[0], regs->gpr[3], regs->gpr[4],
-				    regs->gpr[5], regs->gpr[6]);
-	else
-#endif
-		audit_syscall_entry(regs->gpr[0],
-				    regs->gpr[3] & 0xffffffff,
-				    regs->gpr[4] & 0xffffffff,
-				    regs->gpr[5] & 0xffffffff,
-				    regs->gpr[6] & 0xffffffff);
-
-	/* Return the possibly modified but valid syscall number */
-	return regs->gpr[0];
-
-skip:
-	/*
-	 * If we are aborting explicitly, or if the syscall number is
-	 * now invalid, set the return value to -ENOSYS.
-	 */
-	regs->gpr[3] = -ENOSYS;
-	return -1;
-}
-
-void do_syscall_trace_leave(struct pt_regs *regs)
-{
-	int step;
-
-	audit_syscall_exit(regs);
-
-	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
-		trace_sys_exit(regs, regs->result);
-
-	step = test_thread_flag(TIF_SINGLESTEP);
-	if (step || test_thread_flag(TIF_SYSCALL_TRACE))
-		tracehook_report_syscall_exit(regs, step);
-
-	user_enter();
-}
-
-void __init pt_regs_check(void);
-
-/*
- * Dummy function, its purpose is to break the build if struct pt_regs and
- * struct user_pt_regs don't match.
- */
-void __init pt_regs_check(void)
-{
-	BUILD_BUG_ON(offsetof(struct pt_regs, gpr) !=
-		     offsetof(struct user_pt_regs, gpr));
-	BUILD_BUG_ON(offsetof(struct pt_regs, nip) !=
-		     offsetof(struct user_pt_regs, nip));
-	BUILD_BUG_ON(offsetof(struct pt_regs, msr) !=
-		     offsetof(struct user_pt_regs, msr));
-	BUILD_BUG_ON(offsetof(struct pt_regs, msr) !=
-		     offsetof(struct user_pt_regs, msr));
-	BUILD_BUG_ON(offsetof(struct pt_regs, orig_gpr3) !=
-		     offsetof(struct user_pt_regs, orig_gpr3));
-	BUILD_BUG_ON(offsetof(struct pt_regs, ctr) !=
-		     offsetof(struct user_pt_regs, ctr));
-	BUILD_BUG_ON(offsetof(struct pt_regs, link) !=
-		     offsetof(struct user_pt_regs, link));
-	BUILD_BUG_ON(offsetof(struct pt_regs, xer) !=
-		     offsetof(struct user_pt_regs, xer));
-	BUILD_BUG_ON(offsetof(struct pt_regs, ccr) !=
-		     offsetof(struct user_pt_regs, ccr));
-#ifdef __powerpc64__
-	BUILD_BUG_ON(offsetof(struct pt_regs, softe) !=
-		     offsetof(struct user_pt_regs, softe));
-#else
-	BUILD_BUG_ON(offsetof(struct pt_regs, mq) !=
-		     offsetof(struct user_pt_regs, mq));
-#endif
-	BUILD_BUG_ON(offsetof(struct pt_regs, trap) !=
-		     offsetof(struct user_pt_regs, trap));
-	BUILD_BUG_ON(offsetof(struct pt_regs, dar) !=
-		     offsetof(struct user_pt_regs, dar));
-	BUILD_BUG_ON(offsetof(struct pt_regs, dsisr) !=
-		     offsetof(struct user_pt_regs, dsisr));
-	BUILD_BUG_ON(offsetof(struct pt_regs, result) !=
-		     offsetof(struct user_pt_regs, result));
-
-	BUILD_BUG_ON(sizeof(struct user_pt_regs) > sizeof(struct pt_regs));
-
-	// Now check that the pt_regs offsets match the uapi #defines
-	#define CHECK_REG(_pt, _reg) \
-		BUILD_BUG_ON(_pt != (offsetof(struct user_pt_regs, _reg) / \
-				     sizeof(unsigned long)));
-
-	CHECK_REG(PT_R0,  gpr[0]);
-	CHECK_REG(PT_R1,  gpr[1]);
-	CHECK_REG(PT_R2,  gpr[2]);
-	CHECK_REG(PT_R3,  gpr[3]);
-	CHECK_REG(PT_R4,  gpr[4]);
-	CHECK_REG(PT_R5,  gpr[5]);
-	CHECK_REG(PT_R6,  gpr[6]);
-	CHECK_REG(PT_R7,  gpr[7]);
-	CHECK_REG(PT_R8,  gpr[8]);
-	CHECK_REG(PT_R9,  gpr[9]);
-	CHECK_REG(PT_R10, gpr[10]);
-	CHECK_REG(PT_R11, gpr[11]);
-	CHECK_REG(PT_R12, gpr[12]);
-	CHECK_REG(PT_R13, gpr[13]);
-	CHECK_REG(PT_R14, gpr[14]);
-	CHECK_REG(PT_R15, gpr[15]);
-	CHECK_REG(PT_R16, gpr[16]);
-	CHECK_REG(PT_R17, gpr[17]);
-	CHECK_REG(PT_R18, gpr[18]);
-	CHECK_REG(PT_R19, gpr[19]);
-	CHECK_REG(PT_R20, gpr[20]);
-	CHECK_REG(PT_R21, gpr[21]);
-	CHECK_REG(PT_R22, gpr[22]);
-	CHECK_REG(PT_R23, gpr[23]);
-	CHECK_REG(PT_R24, gpr[24]);
-	CHECK_REG(PT_R25, gpr[25]);
-	CHECK_REG(PT_R26, gpr[26]);
-	CHECK_REG(PT_R27, gpr[27]);
-	CHECK_REG(PT_R28, gpr[28]);
-	CHECK_REG(PT_R29, gpr[29]);
-	CHECK_REG(PT_R30, gpr[30]);
-	CHECK_REG(PT_R31, gpr[31]);
-	CHECK_REG(PT_NIP, nip);
-	CHECK_REG(PT_MSR, msr);
-	CHECK_REG(PT_ORIG_R3, orig_gpr3);
-	CHECK_REG(PT_CTR, ctr);
-	CHECK_REG(PT_LNK, link);
-	CHECK_REG(PT_XER, xer);
-	CHECK_REG(PT_CCR, ccr);
-#ifdef CONFIG_PPC64
-	CHECK_REG(PT_SOFTE, softe);
-#else
-	CHECK_REG(PT_MQ, mq);
-#endif
-	CHECK_REG(PT_TRAP, trap);
-	CHECK_REG(PT_DAR, dar);
-	CHECK_REG(PT_DSISR, dsisr);
-	CHECK_REG(PT_RESULT, result);
-	#undef CHECK_REG
-
-	BUILD_BUG_ON(PT_REGS_COUNT != sizeof(struct user_pt_regs) / sizeof(unsigned long));
-
-	/*
-	 * PT_DSCR isn't a real reg, but it's important that it doesn't overlap the
-	 * real registers.
-	 */
-	BUILD_BUG_ON(PT_DSCR < sizeof(struct user_pt_regs) / sizeof(unsigned long));
-}
diff --git a/arch/powerpc/kernel/ptrace/Makefile b/arch/powerpc/kernel/ptrace/Makefile
new file mode 100644
index 0000000..c2f2402
--- /dev/null
+++ b/arch/powerpc/kernel/ptrace/Makefile
@@ -0,0 +1,20 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the linux kernel.
+#
+
+CFLAGS_ptrace-view.o		+= -DUTS_MACHINE='"$(UTS_MACHINE)"'
+
+obj-y				+= ptrace.o ptrace-view.o
+obj-$(CONFIG_COMPAT)		+= ptrace32.o
+obj-$(CONFIG_VSX)		+= ptrace-vsx.o
+ifneq ($(CONFIG_VSX),y)
+obj-y				+= ptrace-novsx.o
+endif
+obj-$(CONFIG_ALTIVEC)		+= ptrace-altivec.o
+obj-$(CONFIG_SPE)		+= ptrace-spe.o
+obj-$(CONFIG_PPC_TRANSACTIONAL_MEM)	+= ptrace-tm.o
+obj-$(CONFIG_PPC_ADV_DEBUG_REGS)	+= ptrace-adv.o
+ifneq ($(CONFIG_PPC_ADV_DEBUG_REGS),y)
+obj-y				+= ptrace-noadv.o
+endif
diff --git a/arch/powerpc/kernel/ptrace/ptrace-adv.c b/arch/powerpc/kernel/ptrace/ptrace-adv.c
new file mode 100644
index 0000000..3990c01
--- /dev/null
+++ b/arch/powerpc/kernel/ptrace/ptrace-adv.c
@@ -0,0 +1,492 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include <linux/regset.h>
+#include <linux/hw_breakpoint.h>
+
+#include "ptrace-decl.h"
+
+void user_enable_single_step(struct task_struct *task)
+{
+	struct pt_regs *regs = task->thread.regs;
+
+	if (regs != NULL) {
+		task->thread.debug.dbcr0 &= ~DBCR0_BT;
+		task->thread.debug.dbcr0 |= DBCR0_IDM | DBCR0_IC;
+		regs->msr |= MSR_DE;
+	}
+	set_tsk_thread_flag(task, TIF_SINGLESTEP);
+}
+
+void user_enable_block_step(struct task_struct *task)
+{
+	struct pt_regs *regs = task->thread.regs;
+
+	if (regs != NULL) {
+		task->thread.debug.dbcr0 &= ~DBCR0_IC;
+		task->thread.debug.dbcr0 = DBCR0_IDM | DBCR0_BT;
+		regs->msr |= MSR_DE;
+	}
+	set_tsk_thread_flag(task, TIF_SINGLESTEP);
+}
+
+void user_disable_single_step(struct task_struct *task)
+{
+	struct pt_regs *regs = task->thread.regs;
+
+	if (regs != NULL) {
+		/*
+		 * The logic to disable single stepping should be as
+		 * simple as turning off the Instruction Complete flag.
+		 * And, after doing so, if all debug flags are off, turn
+		 * off DBCR0(IDM) and MSR(DE) .... Torez
+		 */
+		task->thread.debug.dbcr0 &= ~(DBCR0_IC | DBCR0_BT);
+		/*
+		 * Test to see if any of the DBCR_ACTIVE_EVENTS bits are set.
+		 */
+		if (!DBCR_ACTIVE_EVENTS(task->thread.debug.dbcr0,
+					task->thread.debug.dbcr1)) {
+			/*
+			 * All debug events were off.....
+			 */
+			task->thread.debug.dbcr0 &= ~DBCR0_IDM;
+			regs->msr &= ~MSR_DE;
+		}
+	}
+	clear_tsk_thread_flag(task, TIF_SINGLESTEP);
+}
+
+void ppc_gethwdinfo(struct ppc_debug_info *dbginfo)
+{
+	dbginfo->version = 1;
+	dbginfo->num_instruction_bps = CONFIG_PPC_ADV_DEBUG_IACS;
+	dbginfo->num_data_bps = CONFIG_PPC_ADV_DEBUG_DACS;
+	dbginfo->num_condition_regs = CONFIG_PPC_ADV_DEBUG_DVCS;
+	dbginfo->data_bp_alignment = 4;
+	dbginfo->sizeof_condition = 4;
+	dbginfo->features = PPC_DEBUG_FEATURE_INSN_BP_RANGE |
+			    PPC_DEBUG_FEATURE_INSN_BP_MASK;
+	if (IS_ENABLED(CONFIG_PPC_ADV_DEBUG_DAC_RANGE))
+		dbginfo->features |= PPC_DEBUG_FEATURE_DATA_BP_RANGE |
+				     PPC_DEBUG_FEATURE_DATA_BP_MASK;
+}
+
+int ptrace_get_debugreg(struct task_struct *child, unsigned long addr,
+			unsigned long __user *datalp)
+{
+	/* We only support one DABR and no IABRS at the moment */
+	if (addr > 0)
+		return -EINVAL;
+	return put_user(child->thread.debug.dac1, datalp);
+}
+
+int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, unsigned long data)
+{
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+	int ret;
+	struct thread_struct *thread = &task->thread;
+	struct perf_event *bp;
+	struct perf_event_attr attr;
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
+
+	/* For ppc64 we support one DABR and no IABR's at the moment (ppc64).
+	 *  For embedded processors we support one DAC and no IAC's at the
+	 *  moment.
+	 */
+	if (addr > 0)
+		return -EINVAL;
+
+	/* The bottom 3 bits in dabr are flags */
+	if ((data & ~0x7UL) >= TASK_SIZE)
+		return -EIO;
+
+	/* As described above, it was assumed 3 bits were passed with the data
+	 *  address, but we will assume only the mode bits will be passed
+	 *  as to not cause alignment restrictions for DAC-based processors.
+	 */
+
+	/* DAC's hold the whole address without any mode flags */
+	task->thread.debug.dac1 = data & ~0x3UL;
+
+	if (task->thread.debug.dac1 == 0) {
+		dbcr_dac(task) &= ~(DBCR_DAC1R | DBCR_DAC1W);
+		if (!DBCR_ACTIVE_EVENTS(task->thread.debug.dbcr0,
+					task->thread.debug.dbcr1)) {
+			task->thread.regs->msr &= ~MSR_DE;
+			task->thread.debug.dbcr0 &= ~DBCR0_IDM;
+		}
+		return 0;
+	}
+
+	/* Read or Write bits must be set */
+
+	if (!(data & 0x3UL))
+		return -EINVAL;
+
+	/* Set the Internal Debugging flag (IDM bit 1) for the DBCR0 register */
+	task->thread.debug.dbcr0 |= DBCR0_IDM;
+
+	/* Check for write and read flags and set DBCR0 accordingly */
+	dbcr_dac(task) &= ~(DBCR_DAC1R | DBCR_DAC1W);
+	if (data & 0x1UL)
+		dbcr_dac(task) |= DBCR_DAC1R;
+	if (data & 0x2UL)
+		dbcr_dac(task) |= DBCR_DAC1W;
+	task->thread.regs->msr |= MSR_DE;
+	return 0;
+}
+
+static long set_instruction_bp(struct task_struct *child,
+			       struct ppc_hw_breakpoint *bp_info)
+{
+	int slot;
+	int slot1_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC1) != 0);
+	int slot2_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC2) != 0);
+	int slot3_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC3) != 0);
+	int slot4_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC4) != 0);
+
+	if (dbcr_iac_range(child) & DBCR_IAC12MODE)
+		slot2_in_use = 1;
+	if (dbcr_iac_range(child) & DBCR_IAC34MODE)
+		slot4_in_use = 1;
+
+	if (bp_info->addr >= TASK_SIZE)
+		return -EIO;
+
+	if (bp_info->addr_mode != PPC_BREAKPOINT_MODE_EXACT) {
+		/* Make sure range is valid. */
+		if (bp_info->addr2 >= TASK_SIZE)
+			return -EIO;
+
+		/* We need a pair of IAC regsisters */
+		if (!slot1_in_use && !slot2_in_use) {
+			slot = 1;
+			child->thread.debug.iac1 = bp_info->addr;
+			child->thread.debug.iac2 = bp_info->addr2;
+			child->thread.debug.dbcr0 |= DBCR0_IAC1;
+			if (bp_info->addr_mode ==
+					PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE)
+				dbcr_iac_range(child) |= DBCR_IAC12X;
+			else
+				dbcr_iac_range(child) |= DBCR_IAC12I;
+#if CONFIG_PPC_ADV_DEBUG_IACS > 2
+		} else if ((!slot3_in_use) && (!slot4_in_use)) {
+			slot = 3;
+			child->thread.debug.iac3 = bp_info->addr;
+			child->thread.debug.iac4 = bp_info->addr2;
+			child->thread.debug.dbcr0 |= DBCR0_IAC3;
+			if (bp_info->addr_mode ==
+					PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE)
+				dbcr_iac_range(child) |= DBCR_IAC34X;
+			else
+				dbcr_iac_range(child) |= DBCR_IAC34I;
+#endif
+		} else {
+			return -ENOSPC;
+		}
+	} else {
+		/* We only need one.  If possible leave a pair free in
+		 * case a range is needed later
+		 */
+		if (!slot1_in_use) {
+			/*
+			 * Don't use iac1 if iac1-iac2 are free and either
+			 * iac3 or iac4 (but not both) are free
+			 */
+			if (slot2_in_use || slot3_in_use == slot4_in_use) {
+				slot = 1;
+				child->thread.debug.iac1 = bp_info->addr;
+				child->thread.debug.dbcr0 |= DBCR0_IAC1;
+				goto out;
+			}
+		}
+		if (!slot2_in_use) {
+			slot = 2;
+			child->thread.debug.iac2 = bp_info->addr;
+			child->thread.debug.dbcr0 |= DBCR0_IAC2;
+#if CONFIG_PPC_ADV_DEBUG_IACS > 2
+		} else if (!slot3_in_use) {
+			slot = 3;
+			child->thread.debug.iac3 = bp_info->addr;
+			child->thread.debug.dbcr0 |= DBCR0_IAC3;
+		} else if (!slot4_in_use) {
+			slot = 4;
+			child->thread.debug.iac4 = bp_info->addr;
+			child->thread.debug.dbcr0 |= DBCR0_IAC4;
+#endif
+		} else {
+			return -ENOSPC;
+		}
+	}
+out:
+	child->thread.debug.dbcr0 |= DBCR0_IDM;
+	child->thread.regs->msr |= MSR_DE;
+
+	return slot;
+}
+
+static int del_instruction_bp(struct task_struct *child, int slot)
+{
+	switch (slot) {
+	case 1:
+		if ((child->thread.debug.dbcr0 & DBCR0_IAC1) == 0)
+			return -ENOENT;
+
+		if (dbcr_iac_range(child) & DBCR_IAC12MODE) {
+			/* address range - clear slots 1 & 2 */
+			child->thread.debug.iac2 = 0;
+			dbcr_iac_range(child) &= ~DBCR_IAC12MODE;
+		}
+		child->thread.debug.iac1 = 0;
+		child->thread.debug.dbcr0 &= ~DBCR0_IAC1;
+		break;
+	case 2:
+		if ((child->thread.debug.dbcr0 & DBCR0_IAC2) == 0)
+			return -ENOENT;
+
+		if (dbcr_iac_range(child) & DBCR_IAC12MODE)
+			/* used in a range */
+			return -EINVAL;
+		child->thread.debug.iac2 = 0;
+		child->thread.debug.dbcr0 &= ~DBCR0_IAC2;
+		break;
+#if CONFIG_PPC_ADV_DEBUG_IACS > 2
+	case 3:
+		if ((child->thread.debug.dbcr0 & DBCR0_IAC3) == 0)
+			return -ENOENT;
+
+		if (dbcr_iac_range(child) & DBCR_IAC34MODE) {
+			/* address range - clear slots 3 & 4 */
+			child->thread.debug.iac4 = 0;
+			dbcr_iac_range(child) &= ~DBCR_IAC34MODE;
+		}
+		child->thread.debug.iac3 = 0;
+		child->thread.debug.dbcr0 &= ~DBCR0_IAC3;
+		break;
+	case 4:
+		if ((child->thread.debug.dbcr0 & DBCR0_IAC4) == 0)
+			return -ENOENT;
+
+		if (dbcr_iac_range(child) & DBCR_IAC34MODE)
+			/* Used in a range */
+			return -EINVAL;
+		child->thread.debug.iac4 = 0;
+		child->thread.debug.dbcr0 &= ~DBCR0_IAC4;
+		break;
+#endif
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int set_dac(struct task_struct *child, struct ppc_hw_breakpoint *bp_info)
+{
+	int byte_enable =
+		(bp_info->condition_mode >> PPC_BREAKPOINT_CONDITION_BE_SHIFT)
+		& 0xf;
+	int condition_mode =
+		bp_info->condition_mode & PPC_BREAKPOINT_CONDITION_MODE;
+	int slot;
+
+	if (byte_enable && condition_mode == 0)
+		return -EINVAL;
+
+	if (bp_info->addr >= TASK_SIZE)
+		return -EIO;
+
+	if ((dbcr_dac(child) & (DBCR_DAC1R | DBCR_DAC1W)) == 0) {
+		slot = 1;
+		if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
+			dbcr_dac(child) |= DBCR_DAC1R;
+		if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
+			dbcr_dac(child) |= DBCR_DAC1W;
+		child->thread.debug.dac1 = (unsigned long)bp_info->addr;
+#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
+		if (byte_enable) {
+			child->thread.debug.dvc1 =
+				(unsigned long)bp_info->condition_value;
+			child->thread.debug.dbcr2 |=
+				((byte_enable << DBCR2_DVC1BE_SHIFT) |
+				 (condition_mode << DBCR2_DVC1M_SHIFT));
+		}
+#endif
+#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
+	} else if (child->thread.debug.dbcr2 & DBCR2_DAC12MODE) {
+		/* Both dac1 and dac2 are part of a range */
+		return -ENOSPC;
+#endif
+	} else if ((dbcr_dac(child) & (DBCR_DAC2R | DBCR_DAC2W)) == 0) {
+		slot = 2;
+		if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
+			dbcr_dac(child) |= DBCR_DAC2R;
+		if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
+			dbcr_dac(child) |= DBCR_DAC2W;
+		child->thread.debug.dac2 = (unsigned long)bp_info->addr;
+#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
+		if (byte_enable) {
+			child->thread.debug.dvc2 =
+				(unsigned long)bp_info->condition_value;
+			child->thread.debug.dbcr2 |=
+				((byte_enable << DBCR2_DVC2BE_SHIFT) |
+				 (condition_mode << DBCR2_DVC2M_SHIFT));
+		}
+#endif
+	} else {
+		return -ENOSPC;
+	}
+	child->thread.debug.dbcr0 |= DBCR0_IDM;
+	child->thread.regs->msr |= MSR_DE;
+
+	return slot + 4;
+}
+
+static int del_dac(struct task_struct *child, int slot)
+{
+	if (slot == 1) {
+		if ((dbcr_dac(child) & (DBCR_DAC1R | DBCR_DAC1W)) == 0)
+			return -ENOENT;
+
+		child->thread.debug.dac1 = 0;
+		dbcr_dac(child) &= ~(DBCR_DAC1R | DBCR_DAC1W);
+#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
+		if (child->thread.debug.dbcr2 & DBCR2_DAC12MODE) {
+			child->thread.debug.dac2 = 0;
+			child->thread.debug.dbcr2 &= ~DBCR2_DAC12MODE;
+		}
+		child->thread.debug.dbcr2 &= ~(DBCR2_DVC1M | DBCR2_DVC1BE);
+#endif
+#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
+		child->thread.debug.dvc1 = 0;
+#endif
+	} else if (slot == 2) {
+		if ((dbcr_dac(child) & (DBCR_DAC2R | DBCR_DAC2W)) == 0)
+			return -ENOENT;
+
+#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
+		if (child->thread.debug.dbcr2 & DBCR2_DAC12MODE)
+			/* Part of a range */
+			return -EINVAL;
+		child->thread.debug.dbcr2 &= ~(DBCR2_DVC2M | DBCR2_DVC2BE);
+#endif
+#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
+		child->thread.debug.dvc2 = 0;
+#endif
+		child->thread.debug.dac2 = 0;
+		dbcr_dac(child) &= ~(DBCR_DAC2R | DBCR_DAC2W);
+	} else {
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
+static int set_dac_range(struct task_struct *child,
+			 struct ppc_hw_breakpoint *bp_info)
+{
+	int mode = bp_info->addr_mode & PPC_BREAKPOINT_MODE_MASK;
+
+	/* We don't allow range watchpoints to be used with DVC */
+	if (bp_info->condition_mode)
+		return -EINVAL;
+
+	/*
+	 * Best effort to verify the address range.  The user/supervisor bits
+	 * prevent trapping in kernel space, but let's fail on an obvious bad
+	 * range.  The simple test on the mask is not fool-proof, and any
+	 * exclusive range will spill over into kernel space.
+	 */
+	if (bp_info->addr >= TASK_SIZE)
+		return -EIO;
+	if (mode == PPC_BREAKPOINT_MODE_MASK) {
+		/*
+		 * dac2 is a bitmask.  Don't allow a mask that makes a
+		 * kernel space address from a valid dac1 value
+		 */
+		if (~((unsigned long)bp_info->addr2) >= TASK_SIZE)
+			return -EIO;
+	} else {
+		/*
+		 * For range breakpoints, addr2 must also be a valid address
+		 */
+		if (bp_info->addr2 >= TASK_SIZE)
+			return -EIO;
+	}
+
+	if (child->thread.debug.dbcr0 &
+	    (DBCR0_DAC1R | DBCR0_DAC1W | DBCR0_DAC2R | DBCR0_DAC2W))
+		return -ENOSPC;
+
+	if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
+		child->thread.debug.dbcr0 |= (DBCR0_DAC1R | DBCR0_IDM);
+	if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
+		child->thread.debug.dbcr0 |= (DBCR0_DAC1W | DBCR0_IDM);
+	child->thread.debug.dac1 = bp_info->addr;
+	child->thread.debug.dac2 = bp_info->addr2;
+	if (mode == PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE)
+		child->thread.debug.dbcr2  |= DBCR2_DAC12M;
+	else if (mode == PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE)
+		child->thread.debug.dbcr2  |= DBCR2_DAC12MX;
+	else	/* PPC_BREAKPOINT_MODE_MASK */
+		child->thread.debug.dbcr2  |= DBCR2_DAC12MM;
+	child->thread.regs->msr |= MSR_DE;
+
+	return 5;
+}
+#endif /* CONFIG_PPC_ADV_DEBUG_DAC_RANGE */
+
+long ppc_set_hwdebug(struct task_struct *child, struct ppc_hw_breakpoint *bp_info)
+{
+	if (bp_info->version != 1)
+		return -ENOTSUPP;
+	/*
+	 * Check for invalid flags and combinations
+	 */
+	if (bp_info->trigger_type == 0 ||
+	    (bp_info->trigger_type & ~(PPC_BREAKPOINT_TRIGGER_EXECUTE |
+				       PPC_BREAKPOINT_TRIGGER_RW)) ||
+	    (bp_info->addr_mode & ~PPC_BREAKPOINT_MODE_MASK) ||
+	    (bp_info->condition_mode &
+	     ~(PPC_BREAKPOINT_CONDITION_MODE |
+	       PPC_BREAKPOINT_CONDITION_BE_ALL)))
+		return -EINVAL;
+#if CONFIG_PPC_ADV_DEBUG_DVCS == 0
+	if (bp_info->condition_mode != PPC_BREAKPOINT_CONDITION_NONE)
+		return -EINVAL;
+#endif
+
+	if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_EXECUTE) {
+		if (bp_info->trigger_type != PPC_BREAKPOINT_TRIGGER_EXECUTE ||
+		    bp_info->condition_mode != PPC_BREAKPOINT_CONDITION_NONE)
+			return -EINVAL;
+		return set_instruction_bp(child, bp_info);
+	}
+	if (bp_info->addr_mode == PPC_BREAKPOINT_MODE_EXACT)
+		return set_dac(child, bp_info);
+
+#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
+	return set_dac_range(child, bp_info);
+#else
+	return -EINVAL;
+#endif
+}
+
+long ppc_del_hwdebug(struct task_struct *child, long data)
+{
+	int rc;
+
+	if (data <= 4)
+		rc = del_instruction_bp(child, (int)data);
+	else
+		rc = del_dac(child, (int)data - 4);
+
+	if (!rc) {
+		if (!DBCR_ACTIVE_EVENTS(child->thread.debug.dbcr0,
+					child->thread.debug.dbcr1)) {
+			child->thread.debug.dbcr0 &= ~DBCR0_IDM;
+			child->thread.regs->msr &= ~MSR_DE;
+		}
+	}
+	return rc;
+}
diff --git a/arch/powerpc/kernel/ptrace/ptrace-altivec.c b/arch/powerpc/kernel/ptrace/ptrace-altivec.c
new file mode 100644
index 0000000..dd8b75d
--- /dev/null
+++ b/arch/powerpc/kernel/ptrace/ptrace-altivec.c
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include <linux/regset.h>
+#include <linux/elf.h>
+
+#include <asm/switch_to.h>
+
+#include "ptrace-decl.h"
+
+/*
+ * Get/set all the altivec registers vr0..vr31, vscr, vrsave, in one go.
+ * The transfer totals 34 quadword.  Quadwords 0-31 contain the
+ * corresponding vector registers.  Quadword 32 contains the vscr as the
+ * last word (offset 12) within that quadword.  Quadword 33 contains the
+ * vrsave as the first word (offset 0) within the quadword.
+ *
+ * This definition of the VMX state is compatible with the current PPC32
+ * ptrace interface.  This allows signal handling and ptrace to use the
+ * same structures.  This also simplifies the implementation of a bi-arch
+ * (combined (32- and 64-bit) gdb.
+ */
+
+int vr_active(struct task_struct *target, const struct user_regset *regset)
+{
+	flush_altivec_to_thread(target);
+	return target->thread.used_vr ? regset->n : 0;
+}
+
+/*
+ * Regardless of transactions, 'vr_state' holds the current running
+ * value of all the VMX registers and 'ckvr_state' holds the last
+ * checkpointed value of all the VMX registers for the current
+ * transaction to fall back on in case it aborts.
+ *
+ * Userspace interface buffer layout:
+ *
+ * struct data {
+ *	vector128	vr[32];
+ *	vector128	vscr;
+ *	vector128	vrsave;
+ * };
+ */
+int vr_get(struct task_struct *target, const struct user_regset *regset,
+	   unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf)
+{
+	int ret;
+
+	flush_altivec_to_thread(target);
+
+	BUILD_BUG_ON(offsetof(struct thread_vr_state, vscr) !=
+		     offsetof(struct thread_vr_state, vr[32]));
+
+	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				  &target->thread.vr_state, 0,
+				  33 * sizeof(vector128));
+	if (!ret) {
+		/*
+		 * Copy out only the low-order word of vrsave.
+		 */
+		int start, end;
+		union {
+			elf_vrreg_t reg;
+			u32 word;
+		} vrsave;
+		memset(&vrsave, 0, sizeof(vrsave));
+
+		vrsave.word = target->thread.vrsave;
+
+		start = 33 * sizeof(vector128);
+		end = start + sizeof(vrsave);
+		ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &vrsave,
+					  start, end);
+	}
+
+	return ret;
+}
+
+/*
+ * Regardless of transactions, 'vr_state' holds the current running
+ * value of all the VMX registers and 'ckvr_state' holds the last
+ * checkpointed value of all the VMX registers for the current
+ * transaction to fall back on in case it aborts.
+ *
+ * Userspace interface buffer layout:
+ *
+ * struct data {
+ *	vector128	vr[32];
+ *	vector128	vscr;
+ *	vector128	vrsave;
+ * };
+ */
+int vr_set(struct task_struct *target, const struct user_regset *regset,
+	   unsigned int pos, unsigned int count,
+	   const void *kbuf, const void __user *ubuf)
+{
+	int ret;
+
+	flush_altivec_to_thread(target);
+
+	BUILD_BUG_ON(offsetof(struct thread_vr_state, vscr) !=
+		     offsetof(struct thread_vr_state, vr[32]));
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 &target->thread.vr_state, 0,
+				 33 * sizeof(vector128));
+	if (!ret && count > 0) {
+		/*
+		 * We use only the first word of vrsave.
+		 */
+		int start, end;
+		union {
+			elf_vrreg_t reg;
+			u32 word;
+		} vrsave;
+		memset(&vrsave, 0, sizeof(vrsave));
+
+		vrsave.word = target->thread.vrsave;
+
+		start = 33 * sizeof(vector128);
+		end = start + sizeof(vrsave);
+		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &vrsave,
+					 start, end);
+		if (!ret)
+			target->thread.vrsave = vrsave.word;
+	}
+
+	return ret;
+}
diff --git a/arch/powerpc/kernel/ptrace/ptrace-decl.h b/arch/powerpc/kernel/ptrace/ptrace-decl.h
new file mode 100644
index 0000000..3c8a819
--- /dev/null
+++ b/arch/powerpc/kernel/ptrace/ptrace-decl.h
@@ -0,0 +1,184 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+/*
+ * Set of msr bits that gdb can change on behalf of a process.
+ */
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
+#define MSR_DEBUGCHANGE	0
+#else
+#define MSR_DEBUGCHANGE	(MSR_SE | MSR_BE)
+#endif
+
+/*
+ * Max register writeable via put_reg
+ */
+#ifdef CONFIG_PPC32
+#define PT_MAX_PUT_REG	PT_MQ
+#else
+#define PT_MAX_PUT_REG	PT_CCR
+#endif
+
+#define TVSO(f)	(offsetof(struct thread_vr_state, f))
+#define TFSO(f)	(offsetof(struct thread_fp_state, f))
+#define TSO(f)	(offsetof(struct thread_struct, f))
+
+/*
+ * These are our native regset flavors.
+ */
+enum powerpc_regset {
+	REGSET_GPR,
+	REGSET_FPR,
+#ifdef CONFIG_ALTIVEC
+	REGSET_VMX,
+#endif
+#ifdef CONFIG_VSX
+	REGSET_VSX,
+#endif
+#ifdef CONFIG_SPE
+	REGSET_SPE,
+#endif
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+	REGSET_TM_CGPR,		/* TM checkpointed GPR registers */
+	REGSET_TM_CFPR,		/* TM checkpointed FPR registers */
+	REGSET_TM_CVMX,		/* TM checkpointed VMX registers */
+	REGSET_TM_CVSX,		/* TM checkpointed VSX registers */
+	REGSET_TM_SPR,		/* TM specific SPR registers */
+	REGSET_TM_CTAR,		/* TM checkpointed TAR register */
+	REGSET_TM_CPPR,		/* TM checkpointed PPR register */
+	REGSET_TM_CDSCR,	/* TM checkpointed DSCR register */
+#endif
+#ifdef CONFIG_PPC64
+	REGSET_PPR,		/* PPR register */
+	REGSET_DSCR,		/* DSCR register */
+#endif
+#ifdef CONFIG_PPC_BOOK3S_64
+	REGSET_TAR,		/* TAR register */
+	REGSET_EBB,		/* EBB registers */
+	REGSET_PMR,		/* Performance Monitor Registers */
+#endif
+#ifdef CONFIG_PPC_MEM_KEYS
+	REGSET_PKEY,		/* AMR register */
+#endif
+};
+
+/* ptrace-(no)vsx */
+
+int fpr_get(struct task_struct *target, const struct user_regset *regset,
+	    unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf);
+int fpr_set(struct task_struct *target, const struct user_regset *regset,
+	    unsigned int pos, unsigned int count,
+	    const void *kbuf, const void __user *ubuf);
+
+/* ptrace-vsx */
+
+int vsr_active(struct task_struct *target, const struct user_regset *regset);
+int vsr_get(struct task_struct *target, const struct user_regset *regset,
+	    unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf);
+int vsr_set(struct task_struct *target, const struct user_regset *regset,
+	    unsigned int pos, unsigned int count,
+	    const void *kbuf, const void __user *ubuf);
+
+/* ptrace-altivec */
+
+int vr_active(struct task_struct *target, const struct user_regset *regset);
+int vr_get(struct task_struct *target, const struct user_regset *regset,
+	   unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf);
+int vr_set(struct task_struct *target, const struct user_regset *regset,
+	   unsigned int pos, unsigned int count,
+	   const void *kbuf, const void __user *ubuf);
+
+/* ptrace-spe */
+
+int evr_active(struct task_struct *target, const struct user_regset *regset);
+int evr_get(struct task_struct *target, const struct user_regset *regset,
+	    unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf);
+int evr_set(struct task_struct *target, const struct user_regset *regset,
+	    unsigned int pos, unsigned int count,
+	    const void *kbuf, const void __user *ubuf);
+
+/* ptrace */
+
+int gpr32_get_common(struct task_struct *target,
+		     const struct user_regset *regset,
+		     unsigned int pos, unsigned int count,
+			    void *kbuf, void __user *ubuf,
+			    unsigned long *regs);
+int gpr32_set_common(struct task_struct *target,
+		     const struct user_regset *regset,
+		     unsigned int pos, unsigned int count,
+		     const void *kbuf, const void __user *ubuf,
+		     unsigned long *regs);
+
+/* ptrace-tm */
+
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+void flush_tmregs_to_thread(struct task_struct *tsk);
+#else
+static inline void flush_tmregs_to_thread(struct task_struct *tsk) { }
+#endif
+
+int tm_cgpr_active(struct task_struct *target, const struct user_regset *regset);
+int tm_cgpr_get(struct task_struct *target, const struct user_regset *regset,
+		unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf);
+int tm_cgpr_set(struct task_struct *target, const struct user_regset *regset,
+		unsigned int pos, unsigned int count,
+		const void *kbuf, const void __user *ubuf);
+int tm_cfpr_active(struct task_struct *target, const struct user_regset *regset);
+int tm_cfpr_get(struct task_struct *target, const struct user_regset *regset,
+		unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf);
+int tm_cfpr_set(struct task_struct *target, const struct user_regset *regset,
+		unsigned int pos, unsigned int count,
+		const void *kbuf, const void __user *ubuf);
+int tm_cvmx_active(struct task_struct *target, const struct user_regset *regset);
+int tm_cvmx_get(struct task_struct *target, const struct user_regset *regset,
+		unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf);
+int tm_cvmx_set(struct task_struct *target, const struct user_regset *regset,
+		unsigned int pos, unsigned int count,
+		const void *kbuf, const void __user *ubuf);
+int tm_cvsx_active(struct task_struct *target, const struct user_regset *regset);
+int tm_cvsx_get(struct task_struct *target, const struct user_regset *regset,
+		unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf);
+int tm_cvsx_set(struct task_struct *target, const struct user_regset *regset,
+		unsigned int pos, unsigned int count,
+		const void *kbuf, const void __user *ubuf);
+int tm_spr_active(struct task_struct *target, const struct user_regset *regset);
+int tm_spr_get(struct task_struct *target, const struct user_regset *regset,
+	       unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf);
+int tm_spr_set(struct task_struct *target, const struct user_regset *regset,
+	       unsigned int pos, unsigned int count,
+	       const void *kbuf, const void __user *ubuf);
+int tm_tar_active(struct task_struct *target, const struct user_regset *regset);
+int tm_tar_get(struct task_struct *target, const struct user_regset *regset,
+	       unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf);
+int tm_tar_set(struct task_struct *target, const struct user_regset *regset,
+	       unsigned int pos, unsigned int count,
+	       const void *kbuf, const void __user *ubuf);
+int tm_ppr_active(struct task_struct *target, const struct user_regset *regset);
+int tm_ppr_get(struct task_struct *target, const struct user_regset *regset,
+	       unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf);
+int tm_ppr_set(struct task_struct *target, const struct user_regset *regset,
+	       unsigned int pos, unsigned int count,
+	       const void *kbuf, const void __user *ubuf);
+int tm_dscr_active(struct task_struct *target, const struct user_regset *regset);
+int tm_dscr_get(struct task_struct *target, const struct user_regset *regset,
+		unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf);
+int tm_dscr_set(struct task_struct *target, const struct user_regset *regset,
+		unsigned int pos, unsigned int count,
+		const void *kbuf, const void __user *ubuf);
+int tm_cgpr32_get(struct task_struct *target, const struct user_regset *regset,
+		  unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf);
+int tm_cgpr32_set(struct task_struct *target, const struct user_regset *regset,
+		  unsigned int pos, unsigned int count,
+		  const void *kbuf, const void __user *ubuf);
+
+/* ptrace-view */
+
+extern const struct user_regset_view user_ppc_native_view;
+
+/* ptrace-(no)adv */
+void ppc_gethwdinfo(struct ppc_debug_info *dbginfo);
+int ptrace_get_debugreg(struct task_struct *child, unsigned long addr,
+			unsigned long __user *datalp);
+int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, unsigned long data);
+long ppc_set_hwdebug(struct task_struct *child, struct ppc_hw_breakpoint *bp_info);
+long ppc_del_hwdebug(struct task_struct *child, long data);
diff --git a/arch/powerpc/kernel/ptrace/ptrace-noadv.c b/arch/powerpc/kernel/ptrace/ptrace-noadv.c
new file mode 100644
index 0000000..f87e7c5
--- /dev/null
+++ b/arch/powerpc/kernel/ptrace/ptrace-noadv.c
@@ -0,0 +1,265 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include <linux/regset.h>
+#include <linux/hw_breakpoint.h>
+
+#include <asm/debug.h>
+
+#include "ptrace-decl.h"
+
+void user_enable_single_step(struct task_struct *task)
+{
+	struct pt_regs *regs = task->thread.regs;
+
+	if (regs != NULL) {
+		regs->msr &= ~MSR_BE;
+		regs->msr |= MSR_SE;
+	}
+	set_tsk_thread_flag(task, TIF_SINGLESTEP);
+}
+
+void user_enable_block_step(struct task_struct *task)
+{
+	struct pt_regs *regs = task->thread.regs;
+
+	if (regs != NULL) {
+		regs->msr &= ~MSR_SE;
+		regs->msr |= MSR_BE;
+	}
+	set_tsk_thread_flag(task, TIF_SINGLESTEP);
+}
+
+void user_disable_single_step(struct task_struct *task)
+{
+	struct pt_regs *regs = task->thread.regs;
+
+	if (regs != NULL)
+		regs->msr &= ~(MSR_SE | MSR_BE);
+
+	clear_tsk_thread_flag(task, TIF_SINGLESTEP);
+}
+
+void ppc_gethwdinfo(struct ppc_debug_info *dbginfo)
+{
+	dbginfo->version = 1;
+	dbginfo->num_instruction_bps = 0;
+	if (ppc_breakpoint_available())
+		dbginfo->num_data_bps = 1;
+	else
+		dbginfo->num_data_bps = 0;
+	dbginfo->num_condition_regs = 0;
+	dbginfo->data_bp_alignment = sizeof(long);
+	dbginfo->sizeof_condition = 0;
+	if (IS_ENABLED(CONFIG_HAVE_HW_BREAKPOINT)) {
+		dbginfo->features = PPC_DEBUG_FEATURE_DATA_BP_RANGE;
+		if (dawr_enabled())
+			dbginfo->features |= PPC_DEBUG_FEATURE_DATA_BP_DAWR;
+	} else {
+		dbginfo->features = 0;
+	}
+}
+
+int ptrace_get_debugreg(struct task_struct *child, unsigned long addr,
+			unsigned long __user *datalp)
+{
+	unsigned long dabr_fake;
+
+	/* We only support one DABR and no IABRS at the moment */
+	if (addr > 0)
+		return -EINVAL;
+	dabr_fake = ((child->thread.hw_brk.address & (~HW_BRK_TYPE_DABR)) |
+		     (child->thread.hw_brk.type & HW_BRK_TYPE_DABR));
+	return put_user(dabr_fake, datalp);
+}
+
+int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, unsigned long data)
+{
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+	int ret;
+	struct thread_struct *thread = &task->thread;
+	struct perf_event *bp;
+	struct perf_event_attr attr;
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
+	bool set_bp = true;
+	struct arch_hw_breakpoint hw_brk;
+
+	/* For ppc64 we support one DABR and no IABR's at the moment (ppc64).
+	 *  For embedded processors we support one DAC and no IAC's at the
+	 *  moment.
+	 */
+	if (addr > 0)
+		return -EINVAL;
+
+	/* The bottom 3 bits in dabr are flags */
+	if ((data & ~0x7UL) >= TASK_SIZE)
+		return -EIO;
+
+	/* For processors using DABR (i.e. 970), the bottom 3 bits are flags.
+	 *  It was assumed, on previous implementations, that 3 bits were
+	 *  passed together with the data address, fitting the design of the
+	 *  DABR register, as follows:
+	 *
+	 *  bit 0: Read flag
+	 *  bit 1: Write flag
+	 *  bit 2: Breakpoint translation
+	 *
+	 *  Thus, we use them here as so.
+	 */
+
+	/* Ensure breakpoint translation bit is set */
+	if (data && !(data & HW_BRK_TYPE_TRANSLATE))
+		return -EIO;
+	hw_brk.address = data & (~HW_BRK_TYPE_DABR);
+	hw_brk.type = (data & HW_BRK_TYPE_DABR) | HW_BRK_TYPE_PRIV_ALL;
+	hw_brk.len = DABR_MAX_LEN;
+	hw_brk.hw_len = DABR_MAX_LEN;
+	set_bp = (data) && (hw_brk.type & HW_BRK_TYPE_RDWR);
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+	bp = thread->ptrace_bps[0];
+	if (!set_bp) {
+		if (bp) {
+			unregister_hw_breakpoint(bp);
+			thread->ptrace_bps[0] = NULL;
+		}
+		return 0;
+	}
+	if (bp) {
+		attr = bp->attr;
+		attr.bp_addr = hw_brk.address;
+		attr.bp_len = DABR_MAX_LEN;
+		arch_bp_generic_fields(hw_brk.type, &attr.bp_type);
+
+		/* Enable breakpoint */
+		attr.disabled = false;
+
+		ret =  modify_user_hw_breakpoint(bp, &attr);
+		if (ret)
+			return ret;
+
+		thread->ptrace_bps[0] = bp;
+		thread->hw_brk = hw_brk;
+		return 0;
+	}
+
+	/* Create a new breakpoint request if one doesn't exist already */
+	hw_breakpoint_init(&attr);
+	attr.bp_addr = hw_brk.address;
+	attr.bp_len = DABR_MAX_LEN;
+	arch_bp_generic_fields(hw_brk.type,
+			       &attr.bp_type);
+
+	thread->ptrace_bps[0] = bp = register_user_hw_breakpoint(&attr,
+					       ptrace_triggered, NULL, task);
+	if (IS_ERR(bp)) {
+		thread->ptrace_bps[0] = NULL;
+		return PTR_ERR(bp);
+	}
+
+#else /* !CONFIG_HAVE_HW_BREAKPOINT */
+	if (set_bp && (!ppc_breakpoint_available()))
+		return -ENODEV;
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
+	task->thread.hw_brk = hw_brk;
+	return 0;
+}
+
+long ppc_set_hwdebug(struct task_struct *child, struct ppc_hw_breakpoint *bp_info)
+{
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+	int len = 0;
+	struct thread_struct *thread = &child->thread;
+	struct perf_event *bp;
+	struct perf_event_attr attr;
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
+	struct arch_hw_breakpoint brk;
+
+	if (bp_info->version != 1)
+		return -ENOTSUPP;
+	/*
+	 * We only support one data breakpoint
+	 */
+	if ((bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_RW) == 0 ||
+	    (bp_info->trigger_type & ~PPC_BREAKPOINT_TRIGGER_RW) != 0 ||
+	    bp_info->condition_mode != PPC_BREAKPOINT_CONDITION_NONE)
+		return -EINVAL;
+
+	if ((unsigned long)bp_info->addr >= TASK_SIZE)
+		return -EIO;
+
+	brk.address = bp_info->addr & ~HW_BREAKPOINT_ALIGN;
+	brk.type = HW_BRK_TYPE_TRANSLATE;
+	brk.len = DABR_MAX_LEN;
+	if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
+		brk.type |= HW_BRK_TYPE_READ;
+	if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
+		brk.type |= HW_BRK_TYPE_WRITE;
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+	if (bp_info->addr_mode == PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE)
+		len = bp_info->addr2 - bp_info->addr;
+	else if (bp_info->addr_mode == PPC_BREAKPOINT_MODE_EXACT)
+		len = 1;
+	else
+		return -EINVAL;
+	bp = thread->ptrace_bps[0];
+	if (bp)
+		return -ENOSPC;
+
+	/* Create a new breakpoint request if one doesn't exist already */
+	hw_breakpoint_init(&attr);
+	attr.bp_addr = (unsigned long)bp_info->addr;
+	attr.bp_len = len;
+	arch_bp_generic_fields(brk.type, &attr.bp_type);
+
+	bp = register_user_hw_breakpoint(&attr, ptrace_triggered, NULL, child);
+	thread->ptrace_bps[0] = bp;
+	if (IS_ERR(bp)) {
+		thread->ptrace_bps[0] = NULL;
+		return PTR_ERR(bp);
+	}
+
+	return 1;
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
+
+	if (bp_info->addr_mode != PPC_BREAKPOINT_MODE_EXACT)
+		return -EINVAL;
+
+	if (child->thread.hw_brk.address)
+		return -ENOSPC;
+
+	if (!ppc_breakpoint_available())
+		return -ENODEV;
+
+	child->thread.hw_brk = brk;
+
+	return 1;
+}
+
+long ppc_del_hwdebug(struct task_struct *child, long data)
+{
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+	int ret = 0;
+	struct thread_struct *thread = &child->thread;
+	struct perf_event *bp;
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
+	if (data != 1)
+		return -EINVAL;
+
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+	bp = thread->ptrace_bps[0];
+	if (bp) {
+		unregister_hw_breakpoint(bp);
+		thread->ptrace_bps[0] = NULL;
+	} else {
+		ret = -ENOENT;
+	}
+	return ret;
+#else /* CONFIG_HAVE_HW_BREAKPOINT */
+	if (child->thread.hw_brk.address == 0)
+		return -ENOENT;
+
+	child->thread.hw_brk.address = 0;
+	child->thread.hw_brk.type = 0;
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
+
+	return 0;
+}
diff --git a/arch/powerpc/kernel/ptrace/ptrace-novsx.c b/arch/powerpc/kernel/ptrace/ptrace-novsx.c
new file mode 100644
index 0000000..b2dc4e9
--- /dev/null
+++ b/arch/powerpc/kernel/ptrace/ptrace-novsx.c
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include <linux/regset.h>
+
+#include <asm/switch_to.h>
+
+#include "ptrace-decl.h"
+
+/*
+ * Regardless of transactions, 'fp_state' holds the current running
+ * value of all FPR registers and 'ckfp_state' holds the last checkpointed
+ * value of all FPR registers for the current transaction.
+ *
+ * Userspace interface buffer layout:
+ *
+ * struct data {
+ *	u64	fpr[32];
+ *	u64	fpscr;
+ * };
+ */
+int fpr_get(struct task_struct *target, const struct user_regset *regset,
+	    unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf)
+{
+	BUILD_BUG_ON(offsetof(struct thread_fp_state, fpscr) !=
+		     offsetof(struct thread_fp_state, fpr[32]));
+
+	flush_fp_to_thread(target);
+
+	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				   &target->thread.fp_state, 0, -1);
+}
+
+/*
+ * Regardless of transactions, 'fp_state' holds the current running
+ * value of all FPR registers and 'ckfp_state' holds the last checkpointed
+ * value of all FPR registers for the current transaction.
+ *
+ * Userspace interface buffer layout:
+ *
+ * struct data {
+ *	u64	fpr[32];
+ *	u64	fpscr;
+ * };
+ *
+ */
+int fpr_set(struct task_struct *target, const struct user_regset *regset,
+	    unsigned int pos, unsigned int count,
+	    const void *kbuf, const void __user *ubuf)
+{
+	BUILD_BUG_ON(offsetof(struct thread_fp_state, fpscr) !=
+		     offsetof(struct thread_fp_state, fpr[32]));
+
+	flush_fp_to_thread(target);
+
+	return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				  &target->thread.fp_state, 0, -1);
+}
diff --git a/arch/powerpc/kernel/ptrace/ptrace-spe.c b/arch/powerpc/kernel/ptrace/ptrace-spe.c
new file mode 100644
index 0000000..68b86b4
--- /dev/null
+++ b/arch/powerpc/kernel/ptrace/ptrace-spe.c
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include <linux/regset.h>
+
+#include <asm/switch_to.h>
+
+#include "ptrace-decl.h"
+
+/*
+ * For get_evrregs/set_evrregs functions 'data' has the following layout:
+ *
+ * struct {
+ *   u32 evr[32];
+ *   u64 acc;
+ *   u32 spefscr;
+ * }
+ */
+
+int evr_active(struct task_struct *target, const struct user_regset *regset)
+{
+	flush_spe_to_thread(target);
+	return target->thread.used_spe ? regset->n : 0;
+}
+
+int evr_get(struct task_struct *target, const struct user_regset *regset,
+	    unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf)
+{
+	int ret;
+
+	flush_spe_to_thread(target);
+
+	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				  &target->thread.evr,
+				  0, sizeof(target->thread.evr));
+
+	BUILD_BUG_ON(offsetof(struct thread_struct, acc) + sizeof(u64) !=
+		     offsetof(struct thread_struct, spefscr));
+
+	if (!ret)
+		ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+					  &target->thread.acc,
+					  sizeof(target->thread.evr), -1);
+
+	return ret;
+}
+
+int evr_set(struct task_struct *target, const struct user_regset *regset,
+	    unsigned int pos, unsigned int count,
+	    const void *kbuf, const void __user *ubuf)
+{
+	int ret;
+
+	flush_spe_to_thread(target);
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 &target->thread.evr,
+				 0, sizeof(target->thread.evr));
+
+	BUILD_BUG_ON(offsetof(struct thread_struct, acc) + sizeof(u64) !=
+		     offsetof(struct thread_struct, spefscr));
+
+	if (!ret)
+		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+					 &target->thread.acc,
+					 sizeof(target->thread.evr), -1);
+
+	return ret;
+}
diff --git a/arch/powerpc/kernel/ptrace/ptrace-tm.c b/arch/powerpc/kernel/ptrace/ptrace-tm.c
new file mode 100644
index 0000000..d75aff3
--- /dev/null
+++ b/arch/powerpc/kernel/ptrace/ptrace-tm.c
@@ -0,0 +1,851 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include <linux/regset.h>
+
+#include <asm/switch_to.h>
+#include <asm/tm.h>
+#include <asm/asm-prototypes.h>
+
+#include "ptrace-decl.h"
+
+void flush_tmregs_to_thread(struct task_struct *tsk)
+{
+	/*
+	 * If task is not current, it will have been flushed already to
+	 * it's thread_struct during __switch_to().
+	 *
+	 * A reclaim flushes ALL the state or if not in TM save TM SPRs
+	 * in the appropriate thread structures from live.
+	 */
+
+	if (!cpu_has_feature(CPU_FTR_TM) || tsk != current)
+		return;
+
+	if (MSR_TM_SUSPENDED(mfmsr())) {
+		tm_reclaim_current(TM_CAUSE_SIGNAL);
+	} else {
+		tm_enable();
+		tm_save_sprs(&tsk->thread);
+	}
+}
+
+static unsigned long get_user_ckpt_msr(struct task_struct *task)
+{
+	return task->thread.ckpt_regs.msr | task->thread.fpexc_mode;
+}
+
+static int set_user_ckpt_msr(struct task_struct *task, unsigned long msr)
+{
+	task->thread.ckpt_regs.msr &= ~MSR_DEBUGCHANGE;
+	task->thread.ckpt_regs.msr |= msr & MSR_DEBUGCHANGE;
+	return 0;
+}
+
+static int set_user_ckpt_trap(struct task_struct *task, unsigned long trap)
+{
+	task->thread.ckpt_regs.trap = trap & 0xfff0;
+	return 0;
+}
+
+/**
+ * tm_cgpr_active - get active number of registers in CGPR
+ * @target:	The target task.
+ * @regset:	The user regset structure.
+ *
+ * This function checks for the active number of available
+ * regisers in transaction checkpointed GPR category.
+ */
+int tm_cgpr_active(struct task_struct *target, const struct user_regset *regset)
+{
+	if (!cpu_has_feature(CPU_FTR_TM))
+		return -ENODEV;
+
+	if (!MSR_TM_ACTIVE(target->thread.regs->msr))
+		return 0;
+
+	return regset->n;
+}
+
+/**
+ * tm_cgpr_get - get CGPR registers
+ * @target:	The target task.
+ * @regset:	The user regset structure.
+ * @pos:	The buffer position.
+ * @count:	Number of bytes to copy.
+ * @kbuf:	Kernel buffer to copy from.
+ * @ubuf:	User buffer to copy into.
+ *
+ * This function gets transaction checkpointed GPR registers.
+ *
+ * When the transaction is active, 'ckpt_regs' holds all the checkpointed
+ * GPR register values for the current transaction to fall back on if it
+ * aborts in between. This function gets those checkpointed GPR registers.
+ * The userspace interface buffer layout is as follows.
+ *
+ * struct data {
+ *	struct pt_regs ckpt_regs;
+ * };
+ */
+int tm_cgpr_get(struct task_struct *target, const struct user_regset *regset,
+		unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf)
+{
+	int ret;
+
+	if (!cpu_has_feature(CPU_FTR_TM))
+		return -ENODEV;
+
+	if (!MSR_TM_ACTIVE(target->thread.regs->msr))
+		return -ENODATA;
+
+	flush_tmregs_to_thread(target);
+	flush_fp_to_thread(target);
+	flush_altivec_to_thread(target);
+
+	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				  &target->thread.ckpt_regs,
+				  0, offsetof(struct pt_regs, msr));
+	if (!ret) {
+		unsigned long msr = get_user_ckpt_msr(target);
+
+		ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &msr,
+					  offsetof(struct pt_regs, msr),
+					  offsetof(struct pt_regs, msr) +
+					  sizeof(msr));
+	}
+
+	BUILD_BUG_ON(offsetof(struct pt_regs, orig_gpr3) !=
+		     offsetof(struct pt_regs, msr) + sizeof(long));
+
+	if (!ret)
+		ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+					  &target->thread.ckpt_regs.orig_gpr3,
+					  offsetof(struct pt_regs, orig_gpr3),
+					  sizeof(struct user_pt_regs));
+	if (!ret)
+		ret = user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
+					       sizeof(struct user_pt_regs), -1);
+
+	return ret;
+}
+
+/*
+ * tm_cgpr_set - set the CGPR registers
+ * @target:	The target task.
+ * @regset:	The user regset structure.
+ * @pos:	The buffer position.
+ * @count:	Number of bytes to copy.
+ * @kbuf:	Kernel buffer to copy into.
+ * @ubuf:	User buffer to copy from.
+ *
+ * This function sets in transaction checkpointed GPR registers.
+ *
+ * When the transaction is active, 'ckpt_regs' holds the checkpointed
+ * GPR register values for the current transaction to fall back on if it
+ * aborts in between. This function sets those checkpointed GPR registers.
+ * The userspace interface buffer layout is as follows.
+ *
+ * struct data {
+ *	struct pt_regs ckpt_regs;
+ * };
+ */
+int tm_cgpr_set(struct task_struct *target, const struct user_regset *regset,
+		unsigned int pos, unsigned int count,
+		const void *kbuf, const void __user *ubuf)
+{
+	unsigned long reg;
+	int ret;
+
+	if (!cpu_has_feature(CPU_FTR_TM))
+		return -ENODEV;
+
+	if (!MSR_TM_ACTIVE(target->thread.regs->msr))
+		return -ENODATA;
+
+	flush_tmregs_to_thread(target);
+	flush_fp_to_thread(target);
+	flush_altivec_to_thread(target);
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 &target->thread.ckpt_regs,
+				 0, PT_MSR * sizeof(reg));
+
+	if (!ret && count > 0) {
+		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &reg,
+					 PT_MSR * sizeof(reg),
+					 (PT_MSR + 1) * sizeof(reg));
+		if (!ret)
+			ret = set_user_ckpt_msr(target, reg);
+	}
+
+	BUILD_BUG_ON(offsetof(struct pt_regs, orig_gpr3) !=
+		     offsetof(struct pt_regs, msr) + sizeof(long));
+
+	if (!ret)
+		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+					 &target->thread.ckpt_regs.orig_gpr3,
+					 PT_ORIG_R3 * sizeof(reg),
+					 (PT_MAX_PUT_REG + 1) * sizeof(reg));
+
+	if (PT_MAX_PUT_REG + 1 < PT_TRAP && !ret)
+		ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
+						(PT_MAX_PUT_REG + 1) * sizeof(reg),
+						PT_TRAP * sizeof(reg));
+
+	if (!ret && count > 0) {
+		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &reg,
+					 PT_TRAP * sizeof(reg),
+					 (PT_TRAP + 1) * sizeof(reg));
+		if (!ret)
+			ret = set_user_ckpt_trap(target, reg);
+	}
+
+	if (!ret)
+		ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
+						(PT_TRAP + 1) * sizeof(reg), -1);
+
+	return ret;
+}
+
+/**
+ * tm_cfpr_active - get active number of registers in CFPR
+ * @target:	The target task.
+ * @regset:	The user regset structure.
+ *
+ * This function checks for the active number of available
+ * regisers in transaction checkpointed FPR category.
+ */
+int tm_cfpr_active(struct task_struct *target, const struct user_regset *regset)
+{
+	if (!cpu_has_feature(CPU_FTR_TM))
+		return -ENODEV;
+
+	if (!MSR_TM_ACTIVE(target->thread.regs->msr))
+		return 0;
+
+	return regset->n;
+}
+
+/**
+ * tm_cfpr_get - get CFPR registers
+ * @target:	The target task.
+ * @regset:	The user regset structure.
+ * @pos:	The buffer position.
+ * @count:	Number of bytes to copy.
+ * @kbuf:	Kernel buffer to copy from.
+ * @ubuf:	User buffer to copy into.
+ *
+ * This function gets in transaction checkpointed FPR registers.
+ *
+ * When the transaction is active 'ckfp_state' holds the checkpointed
+ * values for the current transaction to fall back on if it aborts
+ * in between. This function gets those checkpointed FPR registers.
+ * The userspace interface buffer layout is as follows.
+ *
+ * struct data {
+ *	u64	fpr[32];
+ *	u64	fpscr;
+ *};
+ */
+int tm_cfpr_get(struct task_struct *target, const struct user_regset *regset,
+		unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf)
+{
+	u64 buf[33];
+	int i;
+
+	if (!cpu_has_feature(CPU_FTR_TM))
+		return -ENODEV;
+
+	if (!MSR_TM_ACTIVE(target->thread.regs->msr))
+		return -ENODATA;
+
+	flush_tmregs_to_thread(target);
+	flush_fp_to_thread(target);
+	flush_altivec_to_thread(target);
+
+	/* copy to local buffer then write that out */
+	for (i = 0; i < 32 ; i++)
+		buf[i] = target->thread.TS_CKFPR(i);
+	buf[32] = target->thread.ckfp_state.fpscr;
+	return user_regset_copyout(&pos, &count, &kbuf, &ubuf, buf, 0, -1);
+}
+
+/**
+ * tm_cfpr_set - set CFPR registers
+ * @target:	The target task.
+ * @regset:	The user regset structure.
+ * @pos:	The buffer position.
+ * @count:	Number of bytes to copy.
+ * @kbuf:	Kernel buffer to copy into.
+ * @ubuf:	User buffer to copy from.
+ *
+ * This function sets in transaction checkpointed FPR registers.
+ *
+ * When the transaction is active 'ckfp_state' holds the checkpointed
+ * FPR register values for the current transaction to fall back on
+ * if it aborts in between. This function sets these checkpointed
+ * FPR registers. The userspace interface buffer layout is as follows.
+ *
+ * struct data {
+ *	u64	fpr[32];
+ *	u64	fpscr;
+ *};
+ */
+int tm_cfpr_set(struct task_struct *target, const struct user_regset *regset,
+		unsigned int pos, unsigned int count,
+		const void *kbuf, const void __user *ubuf)
+{
+	u64 buf[33];
+	int i;
+
+	if (!cpu_has_feature(CPU_FTR_TM))
+		return -ENODEV;
+
+	if (!MSR_TM_ACTIVE(target->thread.regs->msr))
+		return -ENODATA;
+
+	flush_tmregs_to_thread(target);
+	flush_fp_to_thread(target);
+	flush_altivec_to_thread(target);
+
+	for (i = 0; i < 32; i++)
+		buf[i] = target->thread.TS_CKFPR(i);
+	buf[32] = target->thread.ckfp_state.fpscr;
+
+	/* copy to local buffer then write that out */
+	i = user_regset_copyin(&pos, &count, &kbuf, &ubuf, buf, 0, -1);
+	if (i)
+		return i;
+	for (i = 0; i < 32 ; i++)
+		target->thread.TS_CKFPR(i) = buf[i];
+	target->thread.ckfp_state.fpscr = buf[32];
+	return 0;
+}
+
+/**
+ * tm_cvmx_active - get active number of registers in CVMX
+ * @target:	The target task.
+ * @regset:	The user regset structure.
+ *
+ * This function checks for the active number of available
+ * regisers in checkpointed VMX category.
+ */
+int tm_cvmx_active(struct task_struct *target, const struct user_regset *regset)
+{
+	if (!cpu_has_feature(CPU_FTR_TM))
+		return -ENODEV;
+
+	if (!MSR_TM_ACTIVE(target->thread.regs->msr))
+		return 0;
+
+	return regset->n;
+}
+
+/**
+ * tm_cvmx_get - get CMVX registers
+ * @target:	The target task.
+ * @regset:	The user regset structure.
+ * @pos:	The buffer position.
+ * @count:	Number of bytes to copy.
+ * @kbuf:	Kernel buffer to copy from.
+ * @ubuf:	User buffer to copy into.
+ *
+ * This function gets in transaction checkpointed VMX registers.
+ *
+ * When the transaction is active 'ckvr_state' and 'ckvrsave' hold
+ * the checkpointed values for the current transaction to fall
+ * back on if it aborts in between. The userspace interface buffer
+ * layout is as follows.
+ *
+ * struct data {
+ *	vector128	vr[32];
+ *	vector128	vscr;
+ *	vector128	vrsave;
+ *};
+ */
+int tm_cvmx_get(struct task_struct *target, const struct user_regset *regset,
+		unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf)
+{
+	int ret;
+
+	BUILD_BUG_ON(TVSO(vscr) != TVSO(vr[32]));
+
+	if (!cpu_has_feature(CPU_FTR_TM))
+		return -ENODEV;
+
+	if (!MSR_TM_ACTIVE(target->thread.regs->msr))
+		return -ENODATA;
+
+	/* Flush the state */
+	flush_tmregs_to_thread(target);
+	flush_fp_to_thread(target);
+	flush_altivec_to_thread(target);
+
+	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &target->thread.ckvr_state,
+				  0, 33 * sizeof(vector128));
+	if (!ret) {
+		/*
+		 * Copy out only the low-order word of vrsave.
+		 */
+		union {
+			elf_vrreg_t reg;
+			u32 word;
+		} vrsave;
+		memset(&vrsave, 0, sizeof(vrsave));
+		vrsave.word = target->thread.ckvrsave;
+		ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &vrsave,
+					  33 * sizeof(vector128), -1);
+	}
+
+	return ret;
+}
+
+/**
+ * tm_cvmx_set - set CMVX registers
+ * @target:	The target task.
+ * @regset:	The user regset structure.
+ * @pos:	The buffer position.
+ * @count:	Number of bytes to copy.
+ * @kbuf:	Kernel buffer to copy into.
+ * @ubuf:	User buffer to copy from.
+ *
+ * This function sets in transaction checkpointed VMX registers.
+ *
+ * When the transaction is active 'ckvr_state' and 'ckvrsave' hold
+ * the checkpointed values for the current transaction to fall
+ * back on if it aborts in between. The userspace interface buffer
+ * layout is as follows.
+ *
+ * struct data {
+ *	vector128	vr[32];
+ *	vector128	vscr;
+ *	vector128	vrsave;
+ *};
+ */
+int tm_cvmx_set(struct task_struct *target, const struct user_regset *regset,
+		unsigned int pos, unsigned int count,
+		const void *kbuf, const void __user *ubuf)
+{
+	int ret;
+
+	BUILD_BUG_ON(TVSO(vscr) != TVSO(vr[32]));
+
+	if (!cpu_has_feature(CPU_FTR_TM))
+		return -ENODEV;
+
+	if (!MSR_TM_ACTIVE(target->thread.regs->msr))
+		return -ENODATA;
+
+	flush_tmregs_to_thread(target);
+	flush_fp_to_thread(target);
+	flush_altivec_to_thread(target);
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &target->thread.ckvr_state,
+				 0, 33 * sizeof(vector128));
+	if (!ret && count > 0) {
+		/*
+		 * We use only the low-order word of vrsave.
+		 */
+		union {
+			elf_vrreg_t reg;
+			u32 word;
+		} vrsave;
+		memset(&vrsave, 0, sizeof(vrsave));
+		vrsave.word = target->thread.ckvrsave;
+		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &vrsave,
+					 33 * sizeof(vector128), -1);
+		if (!ret)
+			target->thread.ckvrsave = vrsave.word;
+	}
+
+	return ret;
+}
+
+/**
+ * tm_cvsx_active - get active number of registers in CVSX
+ * @target:	The target task.
+ * @regset:	The user regset structure.
+ *
+ * This function checks for the active number of available
+ * regisers in transaction checkpointed VSX category.
+ */
+int tm_cvsx_active(struct task_struct *target, const struct user_regset *regset)
+{
+	if (!cpu_has_feature(CPU_FTR_TM))
+		return -ENODEV;
+
+	if (!MSR_TM_ACTIVE(target->thread.regs->msr))
+		return 0;
+
+	flush_vsx_to_thread(target);
+	return target->thread.used_vsr ? regset->n : 0;
+}
+
+/**
+ * tm_cvsx_get - get CVSX registers
+ * @target:	The target task.
+ * @regset:	The user regset structure.
+ * @pos:	The buffer position.
+ * @count:	Number of bytes to copy.
+ * @kbuf:	Kernel buffer to copy from.
+ * @ubuf:	User buffer to copy into.
+ *
+ * This function gets in transaction checkpointed VSX registers.
+ *
+ * When the transaction is active 'ckfp_state' holds the checkpointed
+ * values for the current transaction to fall back on if it aborts
+ * in between. This function gets those checkpointed VSX registers.
+ * The userspace interface buffer layout is as follows.
+ *
+ * struct data {
+ *	u64	vsx[32];
+ *};
+ */
+int tm_cvsx_get(struct task_struct *target, const struct user_regset *regset,
+		unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf)
+{
+	u64 buf[32];
+	int ret, i;
+
+	if (!cpu_has_feature(CPU_FTR_TM))
+		return -ENODEV;
+
+	if (!MSR_TM_ACTIVE(target->thread.regs->msr))
+		return -ENODATA;
+
+	/* Flush the state */
+	flush_tmregs_to_thread(target);
+	flush_fp_to_thread(target);
+	flush_altivec_to_thread(target);
+	flush_vsx_to_thread(target);
+
+	for (i = 0; i < 32 ; i++)
+		buf[i] = target->thread.ckfp_state.fpr[i][TS_VSRLOWOFFSET];
+	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				  buf, 0, 32 * sizeof(double));
+
+	return ret;
+}
+
+/**
+ * tm_cvsx_set - set CFPR registers
+ * @target:	The target task.
+ * @regset:	The user regset structure.
+ * @pos:	The buffer position.
+ * @count:	Number of bytes to copy.
+ * @kbuf:	Kernel buffer to copy into.
+ * @ubuf:	User buffer to copy from.
+ *
+ * This function sets in transaction checkpointed VSX registers.
+ *
+ * When the transaction is active 'ckfp_state' holds the checkpointed
+ * VSX register values for the current transaction to fall back on
+ * if it aborts in between. This function sets these checkpointed
+ * FPR registers. The userspace interface buffer layout is as follows.
+ *
+ * struct data {
+ *	u64	vsx[32];
+ *};
+ */
+int tm_cvsx_set(struct task_struct *target, const struct user_regset *regset,
+		unsigned int pos, unsigned int count,
+		const void *kbuf, const void __user *ubuf)
+{
+	u64 buf[32];
+	int ret, i;
+
+	if (!cpu_has_feature(CPU_FTR_TM))
+		return -ENODEV;
+
+	if (!MSR_TM_ACTIVE(target->thread.regs->msr))
+		return -ENODATA;
+
+	/* Flush the state */
+	flush_tmregs_to_thread(target);
+	flush_fp_to_thread(target);
+	flush_altivec_to_thread(target);
+	flush_vsx_to_thread(target);
+
+	for (i = 0; i < 32 ; i++)
+		buf[i] = target->thread.ckfp_state.fpr[i][TS_VSRLOWOFFSET];
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 buf, 0, 32 * sizeof(double));
+	if (!ret)
+		for (i = 0; i < 32 ; i++)
+			target->thread.ckfp_state.fpr[i][TS_VSRLOWOFFSET] = buf[i];
+
+	return ret;
+}
+
+/**
+ * tm_spr_active - get active number of registers in TM SPR
+ * @target:	The target task.
+ * @regset:	The user regset structure.
+ *
+ * This function checks the active number of available
+ * regisers in the transactional memory SPR category.
+ */
+int tm_spr_active(struct task_struct *target, const struct user_regset *regset)
+{
+	if (!cpu_has_feature(CPU_FTR_TM))
+		return -ENODEV;
+
+	return regset->n;
+}
+
+/**
+ * tm_spr_get - get the TM related SPR registers
+ * @target:	The target task.
+ * @regset:	The user regset structure.
+ * @pos:	The buffer position.
+ * @count:	Number of bytes to copy.
+ * @kbuf:	Kernel buffer to copy from.
+ * @ubuf:	User buffer to copy into.
+ *
+ * This function gets transactional memory related SPR registers.
+ * The userspace interface buffer layout is as follows.
+ *
+ * struct {
+ *	u64		tm_tfhar;
+ *	u64		tm_texasr;
+ *	u64		tm_tfiar;
+ * };
+ */
+int tm_spr_get(struct task_struct *target, const struct user_regset *regset,
+	       unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf)
+{
+	int ret;
+
+	/* Build tests */
+	BUILD_BUG_ON(TSO(tm_tfhar) + sizeof(u64) != TSO(tm_texasr));
+	BUILD_BUG_ON(TSO(tm_texasr) + sizeof(u64) != TSO(tm_tfiar));
+	BUILD_BUG_ON(TSO(tm_tfiar) + sizeof(u64) != TSO(ckpt_regs));
+
+	if (!cpu_has_feature(CPU_FTR_TM))
+		return -ENODEV;
+
+	/* Flush the states */
+	flush_tmregs_to_thread(target);
+	flush_fp_to_thread(target);
+	flush_altivec_to_thread(target);
+
+	/* TFHAR register */
+	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				  &target->thread.tm_tfhar, 0, sizeof(u64));
+
+	/* TEXASR register */
+	if (!ret)
+		ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+					  &target->thread.tm_texasr, sizeof(u64),
+					  2 * sizeof(u64));
+
+	/* TFIAR register */
+	if (!ret)
+		ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+					  &target->thread.tm_tfiar,
+					  2 * sizeof(u64), 3 * sizeof(u64));
+	return ret;
+}
+
+/**
+ * tm_spr_set - set the TM related SPR registers
+ * @target:	The target task.
+ * @regset:	The user regset structure.
+ * @pos:	The buffer position.
+ * @count:	Number of bytes to copy.
+ * @kbuf:	Kernel buffer to copy into.
+ * @ubuf:	User buffer to copy from.
+ *
+ * This function sets transactional memory related SPR registers.
+ * The userspace interface buffer layout is as follows.
+ *
+ * struct {
+ *	u64		tm_tfhar;
+ *	u64		tm_texasr;
+ *	u64		tm_tfiar;
+ * };
+ */
+int tm_spr_set(struct task_struct *target, const struct user_regset *regset,
+	       unsigned int pos, unsigned int count,
+	       const void *kbuf, const void __user *ubuf)
+{
+	int ret;
+
+	/* Build tests */
+	BUILD_BUG_ON(TSO(tm_tfhar) + sizeof(u64) != TSO(tm_texasr));
+	BUILD_BUG_ON(TSO(tm_texasr) + sizeof(u64) != TSO(tm_tfiar));
+	BUILD_BUG_ON(TSO(tm_tfiar) + sizeof(u64) != TSO(ckpt_regs));
+
+	if (!cpu_has_feature(CPU_FTR_TM))
+		return -ENODEV;
+
+	/* Flush the states */
+	flush_tmregs_to_thread(target);
+	flush_fp_to_thread(target);
+	flush_altivec_to_thread(target);
+
+	/* TFHAR register */
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 &target->thread.tm_tfhar, 0, sizeof(u64));
+
+	/* TEXASR register */
+	if (!ret)
+		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+					 &target->thread.tm_texasr, sizeof(u64),
+					 2 * sizeof(u64));
+
+	/* TFIAR register */
+	if (!ret)
+		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+					 &target->thread.tm_tfiar,
+					 2 * sizeof(u64), 3 * sizeof(u64));
+	return ret;
+}
+
+int tm_tar_active(struct task_struct *target, const struct user_regset *regset)
+{
+	if (!cpu_has_feature(CPU_FTR_TM))
+		return -ENODEV;
+
+	if (MSR_TM_ACTIVE(target->thread.regs->msr))
+		return regset->n;
+
+	return 0;
+}
+
+int tm_tar_get(struct task_struct *target, const struct user_regset *regset,
+	       unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf)
+{
+	int ret;
+
+	if (!cpu_has_feature(CPU_FTR_TM))
+		return -ENODEV;
+
+	if (!MSR_TM_ACTIVE(target->thread.regs->msr))
+		return -ENODATA;
+
+	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				  &target->thread.tm_tar, 0, sizeof(u64));
+	return ret;
+}
+
+int tm_tar_set(struct task_struct *target, const struct user_regset *regset,
+	       unsigned int pos, unsigned int count,
+	       const void *kbuf, const void __user *ubuf)
+{
+	int ret;
+
+	if (!cpu_has_feature(CPU_FTR_TM))
+		return -ENODEV;
+
+	if (!MSR_TM_ACTIVE(target->thread.regs->msr))
+		return -ENODATA;
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 &target->thread.tm_tar, 0, sizeof(u64));
+	return ret;
+}
+
+int tm_ppr_active(struct task_struct *target, const struct user_regset *regset)
+{
+	if (!cpu_has_feature(CPU_FTR_TM))
+		return -ENODEV;
+
+	if (MSR_TM_ACTIVE(target->thread.regs->msr))
+		return regset->n;
+
+	return 0;
+}
+
+
+int tm_ppr_get(struct task_struct *target, const struct user_regset *regset,
+	       unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf)
+{
+	int ret;
+
+	if (!cpu_has_feature(CPU_FTR_TM))
+		return -ENODEV;
+
+	if (!MSR_TM_ACTIVE(target->thread.regs->msr))
+		return -ENODATA;
+
+	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				  &target->thread.tm_ppr, 0, sizeof(u64));
+	return ret;
+}
+
+int tm_ppr_set(struct task_struct *target, const struct user_regset *regset,
+	       unsigned int pos, unsigned int count,
+	       const void *kbuf, const void __user *ubuf)
+{
+	int ret;
+
+	if (!cpu_has_feature(CPU_FTR_TM))
+		return -ENODEV;
+
+	if (!MSR_TM_ACTIVE(target->thread.regs->msr))
+		return -ENODATA;
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 &target->thread.tm_ppr, 0, sizeof(u64));
+	return ret;
+}
+
+int tm_dscr_active(struct task_struct *target, const struct user_regset *regset)
+{
+	if (!cpu_has_feature(CPU_FTR_TM))
+		return -ENODEV;
+
+	if (MSR_TM_ACTIVE(target->thread.regs->msr))
+		return regset->n;
+
+	return 0;
+}
+
+int tm_dscr_get(struct task_struct *target, const struct user_regset *regset,
+		unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf)
+{
+	int ret;
+
+	if (!cpu_has_feature(CPU_FTR_TM))
+		return -ENODEV;
+
+	if (!MSR_TM_ACTIVE(target->thread.regs->msr))
+		return -ENODATA;
+
+	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				  &target->thread.tm_dscr, 0, sizeof(u64));
+	return ret;
+}
+
+int tm_dscr_set(struct task_struct *target, const struct user_regset *regset,
+		unsigned int pos, unsigned int count,
+		const void *kbuf, const void __user *ubuf)
+{
+	int ret;
+
+	if (!cpu_has_feature(CPU_FTR_TM))
+		return -ENODEV;
+
+	if (!MSR_TM_ACTIVE(target->thread.regs->msr))
+		return -ENODATA;
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 &target->thread.tm_dscr, 0, sizeof(u64));
+	return ret;
+}
+
+int tm_cgpr32_get(struct task_struct *target, const struct user_regset *regset,
+		  unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf)
+{
+	return gpr32_get_common(target, regset, pos, count, kbuf, ubuf,
+				&target->thread.ckpt_regs.gpr[0]);
+}
+
+int tm_cgpr32_set(struct task_struct *target, const struct user_regset *regset,
+		  unsigned int pos, unsigned int count,
+		  const void *kbuf, const void __user *ubuf)
+{
+	return gpr32_set_common(target, regset, pos, count, kbuf, ubuf,
+				&target->thread.ckpt_regs.gpr[0]);
+}
diff --git a/arch/powerpc/kernel/ptrace/ptrace-view.c b/arch/powerpc/kernel/ptrace/ptrace-view.c
new file mode 100644
index 0000000..15e3b79
--- /dev/null
+++ b/arch/powerpc/kernel/ptrace/ptrace-view.c
@@ -0,0 +1,904 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include <linux/regset.h>
+#include <linux/elf.h>
+#include <linux/nospec.h>
+#include <linux/pkeys.h>
+
+#include "ptrace-decl.h"
+
+struct pt_regs_offset {
+	const char *name;
+	int offset;
+};
+
+#define STR(s)	#s			/* convert to string */
+#define REG_OFFSET_NAME(r) {.name = #r, .offset = offsetof(struct pt_regs, r)}
+#define GPR_OFFSET_NAME(num)	\
+	{.name = STR(r##num), .offset = offsetof(struct pt_regs, gpr[num])}, \
+	{.name = STR(gpr##num), .offset = offsetof(struct pt_regs, gpr[num])}
+#define REG_OFFSET_END {.name = NULL, .offset = 0}
+
+static const struct pt_regs_offset regoffset_table[] = {
+	GPR_OFFSET_NAME(0),
+	GPR_OFFSET_NAME(1),
+	GPR_OFFSET_NAME(2),
+	GPR_OFFSET_NAME(3),
+	GPR_OFFSET_NAME(4),
+	GPR_OFFSET_NAME(5),
+	GPR_OFFSET_NAME(6),
+	GPR_OFFSET_NAME(7),
+	GPR_OFFSET_NAME(8),
+	GPR_OFFSET_NAME(9),
+	GPR_OFFSET_NAME(10),
+	GPR_OFFSET_NAME(11),
+	GPR_OFFSET_NAME(12),
+	GPR_OFFSET_NAME(13),
+	GPR_OFFSET_NAME(14),
+	GPR_OFFSET_NAME(15),
+	GPR_OFFSET_NAME(16),
+	GPR_OFFSET_NAME(17),
+	GPR_OFFSET_NAME(18),
+	GPR_OFFSET_NAME(19),
+	GPR_OFFSET_NAME(20),
+	GPR_OFFSET_NAME(21),
+	GPR_OFFSET_NAME(22),
+	GPR_OFFSET_NAME(23),
+	GPR_OFFSET_NAME(24),
+	GPR_OFFSET_NAME(25),
+	GPR_OFFSET_NAME(26),
+	GPR_OFFSET_NAME(27),
+	GPR_OFFSET_NAME(28),
+	GPR_OFFSET_NAME(29),
+	GPR_OFFSET_NAME(30),
+	GPR_OFFSET_NAME(31),
+	REG_OFFSET_NAME(nip),
+	REG_OFFSET_NAME(msr),
+	REG_OFFSET_NAME(ctr),
+	REG_OFFSET_NAME(link),
+	REG_OFFSET_NAME(xer),
+	REG_OFFSET_NAME(ccr),
+#ifdef CONFIG_PPC64
+	REG_OFFSET_NAME(softe),
+#else
+	REG_OFFSET_NAME(mq),
+#endif
+	REG_OFFSET_NAME(trap),
+	REG_OFFSET_NAME(dar),
+	REG_OFFSET_NAME(dsisr),
+	REG_OFFSET_END,
+};
+
+/**
+ * regs_query_register_offset() - query register offset from its name
+ * @name:	the name of a register
+ *
+ * regs_query_register_offset() returns the offset of a register in struct
+ * pt_regs from its name. If the name is invalid, this returns -EINVAL;
+ */
+int regs_query_register_offset(const char *name)
+{
+	const struct pt_regs_offset *roff;
+	for (roff = regoffset_table; roff->name != NULL; roff++)
+		if (!strcmp(roff->name, name))
+			return roff->offset;
+	return -EINVAL;
+}
+
+/**
+ * regs_query_register_name() - query register name from its offset
+ * @offset:	the offset of a register in struct pt_regs.
+ *
+ * regs_query_register_name() returns the name of a register from its
+ * offset in struct pt_regs. If the @offset is invalid, this returns NULL;
+ */
+const char *regs_query_register_name(unsigned int offset)
+{
+	const struct pt_regs_offset *roff;
+	for (roff = regoffset_table; roff->name != NULL; roff++)
+		if (roff->offset == offset)
+			return roff->name;
+	return NULL;
+}
+
+/*
+ * does not yet catch signals sent when the child dies.
+ * in exit.c or in signal.c.
+ */
+
+static unsigned long get_user_msr(struct task_struct *task)
+{
+	return task->thread.regs->msr | task->thread.fpexc_mode;
+}
+
+static int set_user_msr(struct task_struct *task, unsigned long msr)
+{
+	task->thread.regs->msr &= ~MSR_DEBUGCHANGE;
+	task->thread.regs->msr |= msr & MSR_DEBUGCHANGE;
+	return 0;
+}
+
+#ifdef CONFIG_PPC64
+static int get_user_dscr(struct task_struct *task, unsigned long *data)
+{
+	*data = task->thread.dscr;
+	return 0;
+}
+
+static int set_user_dscr(struct task_struct *task, unsigned long dscr)
+{
+	task->thread.dscr = dscr;
+	task->thread.dscr_inherit = 1;
+	return 0;
+}
+#else
+static int get_user_dscr(struct task_struct *task, unsigned long *data)
+{
+	return -EIO;
+}
+
+static int set_user_dscr(struct task_struct *task, unsigned long dscr)
+{
+	return -EIO;
+}
+#endif
+
+/*
+ * We prevent mucking around with the reserved area of trap
+ * which are used internally by the kernel.
+ */
+static int set_user_trap(struct task_struct *task, unsigned long trap)
+{
+	task->thread.regs->trap = trap & 0xfff0;
+	return 0;
+}
+
+/*
+ * Get contents of register REGNO in task TASK.
+ */
+int ptrace_get_reg(struct task_struct *task, int regno, unsigned long *data)
+{
+	unsigned int regs_max;
+
+	if (task->thread.regs == NULL || !data)
+		return -EIO;
+
+	if (regno == PT_MSR) {
+		*data = get_user_msr(task);
+		return 0;
+	}
+
+	if (regno == PT_DSCR)
+		return get_user_dscr(task, data);
+
+	/*
+	 * softe copies paca->irq_soft_mask variable state. Since irq_soft_mask is
+	 * no more used as a flag, lets force usr to alway see the softe value as 1
+	 * which means interrupts are not soft disabled.
+	 */
+	if (IS_ENABLED(CONFIG_PPC64) && regno == PT_SOFTE) {
+		*data = 1;
+		return  0;
+	}
+
+	regs_max = sizeof(struct user_pt_regs) / sizeof(unsigned long);
+	if (regno < regs_max) {
+		regno = array_index_nospec(regno, regs_max);
+		*data = ((unsigned long *)task->thread.regs)[regno];
+		return 0;
+	}
+
+	return -EIO;
+}
+
+/*
+ * Write contents of register REGNO in task TASK.
+ */
+int ptrace_put_reg(struct task_struct *task, int regno, unsigned long data)
+{
+	if (task->thread.regs == NULL)
+		return -EIO;
+
+	if (regno == PT_MSR)
+		return set_user_msr(task, data);
+	if (regno == PT_TRAP)
+		return set_user_trap(task, data);
+	if (regno == PT_DSCR)
+		return set_user_dscr(task, data);
+
+	if (regno <= PT_MAX_PUT_REG) {
+		regno = array_index_nospec(regno, PT_MAX_PUT_REG + 1);
+		((unsigned long *)task->thread.regs)[regno] = data;
+		return 0;
+	}
+	return -EIO;
+}
+
+static int gpr_get(struct task_struct *target, const struct user_regset *regset,
+		   unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf)
+{
+	int i, ret;
+
+	if (target->thread.regs == NULL)
+		return -EIO;
+
+	if (!FULL_REGS(target->thread.regs)) {
+		/* We have a partial register set.  Fill 14-31 with bogus values */
+		for (i = 14; i < 32; i++)
+			target->thread.regs->gpr[i] = NV_REG_POISON;
+	}
+
+	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				  target->thread.regs,
+				  0, offsetof(struct pt_regs, msr));
+	if (!ret) {
+		unsigned long msr = get_user_msr(target);
+		ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &msr,
+					  offsetof(struct pt_regs, msr),
+					  offsetof(struct pt_regs, msr) +
+					  sizeof(msr));
+	}
+
+	BUILD_BUG_ON(offsetof(struct pt_regs, orig_gpr3) !=
+		     offsetof(struct pt_regs, msr) + sizeof(long));
+
+	if (!ret)
+		ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+					  &target->thread.regs->orig_gpr3,
+					  offsetof(struct pt_regs, orig_gpr3),
+					  sizeof(struct user_pt_regs));
+	if (!ret)
+		ret = user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
+					       sizeof(struct user_pt_regs), -1);
+
+	return ret;
+}
+
+static int gpr_set(struct task_struct *target, const struct user_regset *regset,
+		   unsigned int pos, unsigned int count, const void *kbuf,
+		   const void __user *ubuf)
+{
+	unsigned long reg;
+	int ret;
+
+	if (target->thread.regs == NULL)
+		return -EIO;
+
+	CHECK_FULL_REGS(target->thread.regs);
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 target->thread.regs,
+				 0, PT_MSR * sizeof(reg));
+
+	if (!ret && count > 0) {
+		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &reg,
+					 PT_MSR * sizeof(reg),
+					 (PT_MSR + 1) * sizeof(reg));
+		if (!ret)
+			ret = set_user_msr(target, reg);
+	}
+
+	BUILD_BUG_ON(offsetof(struct pt_regs, orig_gpr3) !=
+		     offsetof(struct pt_regs, msr) + sizeof(long));
+
+	if (!ret)
+		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+					 &target->thread.regs->orig_gpr3,
+					 PT_ORIG_R3 * sizeof(reg),
+					 (PT_MAX_PUT_REG + 1) * sizeof(reg));
+
+	if (PT_MAX_PUT_REG + 1 < PT_TRAP && !ret)
+		ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
+						(PT_MAX_PUT_REG + 1) * sizeof(reg),
+						PT_TRAP * sizeof(reg));
+
+	if (!ret && count > 0) {
+		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &reg,
+					 PT_TRAP * sizeof(reg),
+					 (PT_TRAP + 1) * sizeof(reg));
+		if (!ret)
+			ret = set_user_trap(target, reg);
+	}
+
+	if (!ret)
+		ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
+						(PT_TRAP + 1) * sizeof(reg), -1);
+
+	return ret;
+}
+
+#ifdef CONFIG_PPC64
+static int ppr_get(struct task_struct *target, const struct user_regset *regset,
+		   unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf)
+{
+	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				   &target->thread.regs->ppr, 0, sizeof(u64));
+}
+
+static int ppr_set(struct task_struct *target, const struct user_regset *regset,
+		   unsigned int pos, unsigned int count, const void *kbuf,
+		   const void __user *ubuf)
+{
+	return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				  &target->thread.regs->ppr, 0, sizeof(u64));
+}
+
+static int dscr_get(struct task_struct *target, const struct user_regset *regset,
+		    unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf)
+{
+	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				   &target->thread.dscr, 0, sizeof(u64));
+}
+static int dscr_set(struct task_struct *target, const struct user_regset *regset,
+		    unsigned int pos, unsigned int count, const void *kbuf,
+		    const void __user *ubuf)
+{
+	return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				  &target->thread.dscr, 0, sizeof(u64));
+}
+#endif
+#ifdef CONFIG_PPC_BOOK3S_64
+static int tar_get(struct task_struct *target, const struct user_regset *regset,
+		   unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf)
+{
+	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				   &target->thread.tar, 0, sizeof(u64));
+}
+static int tar_set(struct task_struct *target, const struct user_regset *regset,
+		   unsigned int pos, unsigned int count, const void *kbuf,
+		   const void __user *ubuf)
+{
+	return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				  &target->thread.tar, 0, sizeof(u64));
+}
+
+static int ebb_active(struct task_struct *target, const struct user_regset *regset)
+{
+	if (!cpu_has_feature(CPU_FTR_ARCH_207S))
+		return -ENODEV;
+
+	if (target->thread.used_ebb)
+		return regset->n;
+
+	return 0;
+}
+
+static int ebb_get(struct task_struct *target, const struct user_regset *regset,
+		   unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf)
+{
+	/* Build tests */
+	BUILD_BUG_ON(TSO(ebbrr) + sizeof(unsigned long) != TSO(ebbhr));
+	BUILD_BUG_ON(TSO(ebbhr) + sizeof(unsigned long) != TSO(bescr));
+
+	if (!cpu_has_feature(CPU_FTR_ARCH_207S))
+		return -ENODEV;
+
+	if (!target->thread.used_ebb)
+		return -ENODATA;
+
+	return user_regset_copyout(&pos, &count, &kbuf, &ubuf, &target->thread.ebbrr,
+				   0, 3 * sizeof(unsigned long));
+}
+
+static int ebb_set(struct task_struct *target, const struct user_regset *regset,
+		   unsigned int pos, unsigned int count, const void *kbuf,
+		   const void __user *ubuf)
+{
+	int ret = 0;
+
+	/* Build tests */
+	BUILD_BUG_ON(TSO(ebbrr) + sizeof(unsigned long) != TSO(ebbhr));
+	BUILD_BUG_ON(TSO(ebbhr) + sizeof(unsigned long) != TSO(bescr));
+
+	if (!cpu_has_feature(CPU_FTR_ARCH_207S))
+		return -ENODEV;
+
+	if (target->thread.used_ebb)
+		return -ENODATA;
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &target->thread.ebbrr,
+				 0, sizeof(unsigned long));
+
+	if (!ret)
+		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+					 &target->thread.ebbhr, sizeof(unsigned long),
+					 2 * sizeof(unsigned long));
+
+	if (!ret)
+		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+					 &target->thread.bescr, 2 * sizeof(unsigned long),
+					 3 * sizeof(unsigned long));
+
+	return ret;
+}
+static int pmu_active(struct task_struct *target, const struct user_regset *regset)
+{
+	if (!cpu_has_feature(CPU_FTR_ARCH_207S))
+		return -ENODEV;
+
+	return regset->n;
+}
+
+static int pmu_get(struct task_struct *target, const struct user_regset *regset,
+		   unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf)
+{
+	/* Build tests */
+	BUILD_BUG_ON(TSO(siar) + sizeof(unsigned long) != TSO(sdar));
+	BUILD_BUG_ON(TSO(sdar) + sizeof(unsigned long) != TSO(sier));
+	BUILD_BUG_ON(TSO(sier) + sizeof(unsigned long) != TSO(mmcr2));
+	BUILD_BUG_ON(TSO(mmcr2) + sizeof(unsigned long) != TSO(mmcr0));
+
+	if (!cpu_has_feature(CPU_FTR_ARCH_207S))
+		return -ENODEV;
+
+	return user_regset_copyout(&pos, &count, &kbuf, &ubuf, &target->thread.siar,
+				   0, 5 * sizeof(unsigned long));
+}
+
+static int pmu_set(struct task_struct *target, const struct user_regset *regset,
+		   unsigned int pos, unsigned int count, const void *kbuf,
+		   const void __user *ubuf)
+{
+	int ret = 0;
+
+	/* Build tests */
+	BUILD_BUG_ON(TSO(siar) + sizeof(unsigned long) != TSO(sdar));
+	BUILD_BUG_ON(TSO(sdar) + sizeof(unsigned long) != TSO(sier));
+	BUILD_BUG_ON(TSO(sier) + sizeof(unsigned long) != TSO(mmcr2));
+	BUILD_BUG_ON(TSO(mmcr2) + sizeof(unsigned long) != TSO(mmcr0));
+
+	if (!cpu_has_feature(CPU_FTR_ARCH_207S))
+		return -ENODEV;
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &target->thread.siar,
+				 0, sizeof(unsigned long));
+
+	if (!ret)
+		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+					 &target->thread.sdar, sizeof(unsigned long),
+					 2 * sizeof(unsigned long));
+
+	if (!ret)
+		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+					 &target->thread.sier, 2 * sizeof(unsigned long),
+					 3 * sizeof(unsigned long));
+
+	if (!ret)
+		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+					 &target->thread.mmcr2, 3 * sizeof(unsigned long),
+					 4 * sizeof(unsigned long));
+
+	if (!ret)
+		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+					 &target->thread.mmcr0, 4 * sizeof(unsigned long),
+					 5 * sizeof(unsigned long));
+	return ret;
+}
+#endif
+
+#ifdef CONFIG_PPC_MEM_KEYS
+static int pkey_active(struct task_struct *target, const struct user_regset *regset)
+{
+	if (!arch_pkeys_enabled())
+		return -ENODEV;
+
+	return regset->n;
+}
+
+static int pkey_get(struct task_struct *target, const struct user_regset *regset,
+		    unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf)
+{
+	BUILD_BUG_ON(TSO(amr) + sizeof(unsigned long) != TSO(iamr));
+	BUILD_BUG_ON(TSO(iamr) + sizeof(unsigned long) != TSO(uamor));
+
+	if (!arch_pkeys_enabled())
+		return -ENODEV;
+
+	return user_regset_copyout(&pos, &count, &kbuf, &ubuf, &target->thread.amr,
+				   0, ELF_NPKEY * sizeof(unsigned long));
+}
+
+static int pkey_set(struct task_struct *target, const struct user_regset *regset,
+		    unsigned int pos, unsigned int count, const void *kbuf,
+		    const void __user *ubuf)
+{
+	u64 new_amr;
+	int ret;
+
+	if (!arch_pkeys_enabled())
+		return -ENODEV;
+
+	/* Only the AMR can be set from userspace */
+	if (pos != 0 || count != sizeof(new_amr))
+		return -EINVAL;
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 &new_amr, 0, sizeof(new_amr));
+	if (ret)
+		return ret;
+
+	/* UAMOR determines which bits of the AMR can be set from userspace. */
+	target->thread.amr = (new_amr & target->thread.uamor) |
+			     (target->thread.amr & ~target->thread.uamor);
+
+	return 0;
+}
+#endif /* CONFIG_PPC_MEM_KEYS */
+
+static const struct user_regset native_regsets[] = {
+	[REGSET_GPR] = {
+		.core_note_type = NT_PRSTATUS, .n = ELF_NGREG,
+		.size = sizeof(long), .align = sizeof(long),
+		.get = gpr_get, .set = gpr_set
+	},
+	[REGSET_FPR] = {
+		.core_note_type = NT_PRFPREG, .n = ELF_NFPREG,
+		.size = sizeof(double), .align = sizeof(double),
+		.get = fpr_get, .set = fpr_set
+	},
+#ifdef CONFIG_ALTIVEC
+	[REGSET_VMX] = {
+		.core_note_type = NT_PPC_VMX, .n = 34,
+		.size = sizeof(vector128), .align = sizeof(vector128),
+		.active = vr_active, .get = vr_get, .set = vr_set
+	},
+#endif
+#ifdef CONFIG_VSX
+	[REGSET_VSX] = {
+		.core_note_type = NT_PPC_VSX, .n = 32,
+		.size = sizeof(double), .align = sizeof(double),
+		.active = vsr_active, .get = vsr_get, .set = vsr_set
+	},
+#endif
+#ifdef CONFIG_SPE
+	[REGSET_SPE] = {
+		.core_note_type = NT_PPC_SPE, .n = 35,
+		.size = sizeof(u32), .align = sizeof(u32),
+		.active = evr_active, .get = evr_get, .set = evr_set
+	},
+#endif
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+	[REGSET_TM_CGPR] = {
+		.core_note_type = NT_PPC_TM_CGPR, .n = ELF_NGREG,
+		.size = sizeof(long), .align = sizeof(long),
+		.active = tm_cgpr_active, .get = tm_cgpr_get, .set = tm_cgpr_set
+	},
+	[REGSET_TM_CFPR] = {
+		.core_note_type = NT_PPC_TM_CFPR, .n = ELF_NFPREG,
+		.size = sizeof(double), .align = sizeof(double),
+		.active = tm_cfpr_active, .get = tm_cfpr_get, .set = tm_cfpr_set
+	},
+	[REGSET_TM_CVMX] = {
+		.core_note_type = NT_PPC_TM_CVMX, .n = ELF_NVMX,
+		.size = sizeof(vector128), .align = sizeof(vector128),
+		.active = tm_cvmx_active, .get = tm_cvmx_get, .set = tm_cvmx_set
+	},
+	[REGSET_TM_CVSX] = {
+		.core_note_type = NT_PPC_TM_CVSX, .n = ELF_NVSX,
+		.size = sizeof(double), .align = sizeof(double),
+		.active = tm_cvsx_active, .get = tm_cvsx_get, .set = tm_cvsx_set
+	},
+	[REGSET_TM_SPR] = {
+		.core_note_type = NT_PPC_TM_SPR, .n = ELF_NTMSPRREG,
+		.size = sizeof(u64), .align = sizeof(u64),
+		.active = tm_spr_active, .get = tm_spr_get, .set = tm_spr_set
+	},
+	[REGSET_TM_CTAR] = {
+		.core_note_type = NT_PPC_TM_CTAR, .n = 1,
+		.size = sizeof(u64), .align = sizeof(u64),
+		.active = tm_tar_active, .get = tm_tar_get, .set = tm_tar_set
+	},
+	[REGSET_TM_CPPR] = {
+		.core_note_type = NT_PPC_TM_CPPR, .n = 1,
+		.size = sizeof(u64), .align = sizeof(u64),
+		.active = tm_ppr_active, .get = tm_ppr_get, .set = tm_ppr_set
+	},
+	[REGSET_TM_CDSCR] = {
+		.core_note_type = NT_PPC_TM_CDSCR, .n = 1,
+		.size = sizeof(u64), .align = sizeof(u64),
+		.active = tm_dscr_active, .get = tm_dscr_get, .set = tm_dscr_set
+	},
+#endif
+#ifdef CONFIG_PPC64
+	[REGSET_PPR] = {
+		.core_note_type = NT_PPC_PPR, .n = 1,
+		.size = sizeof(u64), .align = sizeof(u64),
+		.get = ppr_get, .set = ppr_set
+	},
+	[REGSET_DSCR] = {
+		.core_note_type = NT_PPC_DSCR, .n = 1,
+		.size = sizeof(u64), .align = sizeof(u64),
+		.get = dscr_get, .set = dscr_set
+	},
+#endif
+#ifdef CONFIG_PPC_BOOK3S_64
+	[REGSET_TAR] = {
+		.core_note_type = NT_PPC_TAR, .n = 1,
+		.size = sizeof(u64), .align = sizeof(u64),
+		.get = tar_get, .set = tar_set
+	},
+	[REGSET_EBB] = {
+		.core_note_type = NT_PPC_EBB, .n = ELF_NEBB,
+		.size = sizeof(u64), .align = sizeof(u64),
+		.active = ebb_active, .get = ebb_get, .set = ebb_set
+	},
+	[REGSET_PMR] = {
+		.core_note_type = NT_PPC_PMU, .n = ELF_NPMU,
+		.size = sizeof(u64), .align = sizeof(u64),
+		.active = pmu_active, .get = pmu_get, .set = pmu_set
+	},
+#endif
+#ifdef CONFIG_PPC_MEM_KEYS
+	[REGSET_PKEY] = {
+		.core_note_type = NT_PPC_PKEY, .n = ELF_NPKEY,
+		.size = sizeof(u64), .align = sizeof(u64),
+		.active = pkey_active, .get = pkey_get, .set = pkey_set
+	},
+#endif
+};
+
+const struct user_regset_view user_ppc_native_view = {
+	.name = UTS_MACHINE, .e_machine = ELF_ARCH, .ei_osabi = ELF_OSABI,
+	.regsets = native_regsets, .n = ARRAY_SIZE(native_regsets)
+};
+
+#include <linux/compat.h>
+
+int gpr32_get_common(struct task_struct *target,
+		     const struct user_regset *regset,
+		     unsigned int pos, unsigned int count,
+			    void *kbuf, void __user *ubuf,
+			    unsigned long *regs)
+{
+	compat_ulong_t *k = kbuf;
+	compat_ulong_t __user *u = ubuf;
+	compat_ulong_t reg;
+
+	pos /= sizeof(reg);
+	count /= sizeof(reg);
+
+	if (kbuf)
+		for (; count > 0 && pos < PT_MSR; --count)
+			*k++ = regs[pos++];
+	else
+		for (; count > 0 && pos < PT_MSR; --count)
+			if (__put_user((compat_ulong_t)regs[pos++], u++))
+				return -EFAULT;
+
+	if (count > 0 && pos == PT_MSR) {
+		reg = get_user_msr(target);
+		if (kbuf)
+			*k++ = reg;
+		else if (__put_user(reg, u++))
+			return -EFAULT;
+		++pos;
+		--count;
+	}
+
+	if (kbuf)
+		for (; count > 0 && pos < PT_REGS_COUNT; --count)
+			*k++ = regs[pos++];
+	else
+		for (; count > 0 && pos < PT_REGS_COUNT; --count)
+			if (__put_user((compat_ulong_t)regs[pos++], u++))
+				return -EFAULT;
+
+	kbuf = k;
+	ubuf = u;
+	pos *= sizeof(reg);
+	count *= sizeof(reg);
+	return user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
+					PT_REGS_COUNT * sizeof(reg), -1);
+}
+
+int gpr32_set_common(struct task_struct *target,
+		     const struct user_regset *regset,
+		     unsigned int pos, unsigned int count,
+		     const void *kbuf, const void __user *ubuf,
+		     unsigned long *regs)
+{
+	const compat_ulong_t *k = kbuf;
+	const compat_ulong_t __user *u = ubuf;
+	compat_ulong_t reg;
+
+	pos /= sizeof(reg);
+	count /= sizeof(reg);
+
+	if (kbuf)
+		for (; count > 0 && pos < PT_MSR; --count)
+			regs[pos++] = *k++;
+	else
+		for (; count > 0 && pos < PT_MSR; --count) {
+			if (__get_user(reg, u++))
+				return -EFAULT;
+			regs[pos++] = reg;
+		}
+
+
+	if (count > 0 && pos == PT_MSR) {
+		if (kbuf)
+			reg = *k++;
+		else if (__get_user(reg, u++))
+			return -EFAULT;
+		set_user_msr(target, reg);
+		++pos;
+		--count;
+	}
+
+	if (kbuf) {
+		for (; count > 0 && pos <= PT_MAX_PUT_REG; --count)
+			regs[pos++] = *k++;
+		for (; count > 0 && pos < PT_TRAP; --count, ++pos)
+			++k;
+	} else {
+		for (; count > 0 && pos <= PT_MAX_PUT_REG; --count) {
+			if (__get_user(reg, u++))
+				return -EFAULT;
+			regs[pos++] = reg;
+		}
+		for (; count > 0 && pos < PT_TRAP; --count, ++pos)
+			if (__get_user(reg, u++))
+				return -EFAULT;
+	}
+
+	if (count > 0 && pos == PT_TRAP) {
+		if (kbuf)
+			reg = *k++;
+		else if (__get_user(reg, u++))
+			return -EFAULT;
+		set_user_trap(target, reg);
+		++pos;
+		--count;
+	}
+
+	kbuf = k;
+	ubuf = u;
+	pos *= sizeof(reg);
+	count *= sizeof(reg);
+	return user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
+					 (PT_TRAP + 1) * sizeof(reg), -1);
+}
+
+static int gpr32_get(struct task_struct *target,
+		     const struct user_regset *regset,
+		     unsigned int pos, unsigned int count,
+		     void *kbuf, void __user *ubuf)
+{
+	int i;
+
+	if (target->thread.regs == NULL)
+		return -EIO;
+
+	if (!FULL_REGS(target->thread.regs)) {
+		/*
+		 * We have a partial register set.
+		 * Fill 14-31 with bogus values.
+		 */
+		for (i = 14; i < 32; i++)
+			target->thread.regs->gpr[i] = NV_REG_POISON;
+	}
+	return gpr32_get_common(target, regset, pos, count, kbuf, ubuf,
+			&target->thread.regs->gpr[0]);
+}
+
+static int gpr32_set(struct task_struct *target,
+		     const struct user_regset *regset,
+		     unsigned int pos, unsigned int count,
+		     const void *kbuf, const void __user *ubuf)
+{
+	if (target->thread.regs == NULL)
+		return -EIO;
+
+	CHECK_FULL_REGS(target->thread.regs);
+	return gpr32_set_common(target, regset, pos, count, kbuf, ubuf,
+			&target->thread.regs->gpr[0]);
+}
+
+/*
+ * These are the regset flavors matching the CONFIG_PPC32 native set.
+ */
+static const struct user_regset compat_regsets[] = {
+	[REGSET_GPR] = {
+		.core_note_type = NT_PRSTATUS, .n = ELF_NGREG,
+		.size = sizeof(compat_long_t), .align = sizeof(compat_long_t),
+		.get = gpr32_get, .set = gpr32_set
+	},
+	[REGSET_FPR] = {
+		.core_note_type = NT_PRFPREG, .n = ELF_NFPREG,
+		.size = sizeof(double), .align = sizeof(double),
+		.get = fpr_get, .set = fpr_set
+	},
+#ifdef CONFIG_ALTIVEC
+	[REGSET_VMX] = {
+		.core_note_type = NT_PPC_VMX, .n = 34,
+		.size = sizeof(vector128), .align = sizeof(vector128),
+		.active = vr_active, .get = vr_get, .set = vr_set
+	},
+#endif
+#ifdef CONFIG_SPE
+	[REGSET_SPE] = {
+		.core_note_type = NT_PPC_SPE, .n = 35,
+		.size = sizeof(u32), .align = sizeof(u32),
+		.active = evr_active, .get = evr_get, .set = evr_set
+	},
+#endif
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+	[REGSET_TM_CGPR] = {
+		.core_note_type = NT_PPC_TM_CGPR, .n = ELF_NGREG,
+		.size = sizeof(long), .align = sizeof(long),
+		.active = tm_cgpr_active,
+		.get = tm_cgpr32_get, .set = tm_cgpr32_set
+	},
+	[REGSET_TM_CFPR] = {
+		.core_note_type = NT_PPC_TM_CFPR, .n = ELF_NFPREG,
+		.size = sizeof(double), .align = sizeof(double),
+		.active = tm_cfpr_active, .get = tm_cfpr_get, .set = tm_cfpr_set
+	},
+	[REGSET_TM_CVMX] = {
+		.core_note_type = NT_PPC_TM_CVMX, .n = ELF_NVMX,
+		.size = sizeof(vector128), .align = sizeof(vector128),
+		.active = tm_cvmx_active, .get = tm_cvmx_get, .set = tm_cvmx_set
+	},
+	[REGSET_TM_CVSX] = {
+		.core_note_type = NT_PPC_TM_CVSX, .n = ELF_NVSX,
+		.size = sizeof(double), .align = sizeof(double),
+		.active = tm_cvsx_active, .get = tm_cvsx_get, .set = tm_cvsx_set
+	},
+	[REGSET_TM_SPR] = {
+		.core_note_type = NT_PPC_TM_SPR, .n = ELF_NTMSPRREG,
+		.size = sizeof(u64), .align = sizeof(u64),
+		.active = tm_spr_active, .get = tm_spr_get, .set = tm_spr_set
+	},
+	[REGSET_TM_CTAR] = {
+		.core_note_type = NT_PPC_TM_CTAR, .n = 1,
+		.size = sizeof(u64), .align = sizeof(u64),
+		.active = tm_tar_active, .get = tm_tar_get, .set = tm_tar_set
+	},
+	[REGSET_TM_CPPR] = {
+		.core_note_type = NT_PPC_TM_CPPR, .n = 1,
+		.size = sizeof(u64), .align = sizeof(u64),
+		.active = tm_ppr_active, .get = tm_ppr_get, .set = tm_ppr_set
+	},
+	[REGSET_TM_CDSCR] = {
+		.core_note_type = NT_PPC_TM_CDSCR, .n = 1,
+		.size = sizeof(u64), .align = sizeof(u64),
+		.active = tm_dscr_active, .get = tm_dscr_get, .set = tm_dscr_set
+	},
+#endif
+#ifdef CONFIG_PPC64
+	[REGSET_PPR] = {
+		.core_note_type = NT_PPC_PPR, .n = 1,
+		.size = sizeof(u64), .align = sizeof(u64),
+		.get = ppr_get, .set = ppr_set
+	},
+	[REGSET_DSCR] = {
+		.core_note_type = NT_PPC_DSCR, .n = 1,
+		.size = sizeof(u64), .align = sizeof(u64),
+		.get = dscr_get, .set = dscr_set
+	},
+#endif
+#ifdef CONFIG_PPC_BOOK3S_64
+	[REGSET_TAR] = {
+		.core_note_type = NT_PPC_TAR, .n = 1,
+		.size = sizeof(u64), .align = sizeof(u64),
+		.get = tar_get, .set = tar_set
+	},
+	[REGSET_EBB] = {
+		.core_note_type = NT_PPC_EBB, .n = ELF_NEBB,
+		.size = sizeof(u64), .align = sizeof(u64),
+		.active = ebb_active, .get = ebb_get, .set = ebb_set
+	},
+#endif
+};
+
+static const struct user_regset_view user_ppc_compat_view = {
+	.name = "ppc", .e_machine = EM_PPC, .ei_osabi = ELF_OSABI,
+	.regsets = compat_regsets, .n = ARRAY_SIZE(compat_regsets)
+};
+
+const struct user_regset_view *task_user_regset_view(struct task_struct *task)
+{
+	if (IS_ENABLED(CONFIG_PPC64) && test_tsk_thread_flag(task, TIF_32BIT))
+		return &user_ppc_compat_view;
+	return &user_ppc_native_view;
+}
diff --git a/arch/powerpc/kernel/ptrace/ptrace-vsx.c b/arch/powerpc/kernel/ptrace/ptrace-vsx.c
new file mode 100644
index 0000000..d53466d
--- /dev/null
+++ b/arch/powerpc/kernel/ptrace/ptrace-vsx.c
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include <linux/regset.h>
+
+#include <asm/switch_to.h>
+
+#include "ptrace-decl.h"
+
+/*
+ * Regardless of transactions, 'fp_state' holds the current running
+ * value of all FPR registers and 'ckfp_state' holds the last checkpointed
+ * value of all FPR registers for the current transaction.
+ *
+ * Userspace interface buffer layout:
+ *
+ * struct data {
+ *	u64	fpr[32];
+ *	u64	fpscr;
+ * };
+ */
+int fpr_get(struct task_struct *target, const struct user_regset *regset,
+	    unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf)
+{
+	u64 buf[33];
+	int i;
+
+	flush_fp_to_thread(target);
+
+	/* copy to local buffer then write that out */
+	for (i = 0; i < 32 ; i++)
+		buf[i] = target->thread.TS_FPR(i);
+	buf[32] = target->thread.fp_state.fpscr;
+	return user_regset_copyout(&pos, &count, &kbuf, &ubuf, buf, 0, -1);
+}
+
+/*
+ * Regardless of transactions, 'fp_state' holds the current running
+ * value of all FPR registers and 'ckfp_state' holds the last checkpointed
+ * value of all FPR registers for the current transaction.
+ *
+ * Userspace interface buffer layout:
+ *
+ * struct data {
+ *	u64	fpr[32];
+ *	u64	fpscr;
+ * };
+ *
+ */
+int fpr_set(struct task_struct *target, const struct user_regset *regset,
+	    unsigned int pos, unsigned int count,
+	    const void *kbuf, const void __user *ubuf)
+{
+	u64 buf[33];
+	int i;
+
+	flush_fp_to_thread(target);
+
+	for (i = 0; i < 32 ; i++)
+		buf[i] = target->thread.TS_FPR(i);
+	buf[32] = target->thread.fp_state.fpscr;
+
+	/* copy to local buffer then write that out */
+	i = user_regset_copyin(&pos, &count, &kbuf, &ubuf, buf, 0, -1);
+	if (i)
+		return i;
+
+	for (i = 0; i < 32 ; i++)
+		target->thread.TS_FPR(i) = buf[i];
+	target->thread.fp_state.fpscr = buf[32];
+	return 0;
+}
+
+/*
+ * Currently to set and and get all the vsx state, you need to call
+ * the fp and VMX calls as well.  This only get/sets the lower 32
+ * 128bit VSX registers.
+ */
+
+int vsr_active(struct task_struct *target, const struct user_regset *regset)
+{
+	flush_vsx_to_thread(target);
+	return target->thread.used_vsr ? regset->n : 0;
+}
+
+/*
+ * Regardless of transactions, 'fp_state' holds the current running
+ * value of all FPR registers and 'ckfp_state' holds the last
+ * checkpointed value of all FPR registers for the current
+ * transaction.
+ *
+ * Userspace interface buffer layout:
+ *
+ * struct data {
+ *	u64	vsx[32];
+ * };
+ */
+int vsr_get(struct task_struct *target, const struct user_regset *regset,
+	    unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf)
+{
+	u64 buf[32];
+	int ret, i;
+
+	flush_tmregs_to_thread(target);
+	flush_fp_to_thread(target);
+	flush_altivec_to_thread(target);
+	flush_vsx_to_thread(target);
+
+	for (i = 0; i < 32 ; i++)
+		buf[i] = target->thread.fp_state.fpr[i][TS_VSRLOWOFFSET];
+
+	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				  buf, 0, 32 * sizeof(double));
+
+	return ret;
+}
+
+/*
+ * Regardless of transactions, 'fp_state' holds the current running
+ * value of all FPR registers and 'ckfp_state' holds the last
+ * checkpointed value of all FPR registers for the current
+ * transaction.
+ *
+ * Userspace interface buffer layout:
+ *
+ * struct data {
+ *	u64	vsx[32];
+ * };
+ */
+int vsr_set(struct task_struct *target, const struct user_regset *regset,
+	    unsigned int pos, unsigned int count,
+	    const void *kbuf, const void __user *ubuf)
+{
+	u64 buf[32];
+	int ret, i;
+
+	flush_tmregs_to_thread(target);
+	flush_fp_to_thread(target);
+	flush_altivec_to_thread(target);
+	flush_vsx_to_thread(target);
+
+	for (i = 0; i < 32 ; i++)
+		buf[i] = target->thread.fp_state.fpr[i][TS_VSRLOWOFFSET];
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 buf, 0, 32 * sizeof(double));
+	if (!ret)
+		for (i = 0; i < 32 ; i++)
+			target->thread.fp_state.fpr[i][TS_VSRLOWOFFSET] = buf[i];
+
+	return ret;
+}
diff --git a/arch/powerpc/kernel/ptrace/ptrace.c b/arch/powerpc/kernel/ptrace/ptrace.c
new file mode 100644
index 0000000..f6e51be
--- /dev/null
+++ b/arch/powerpc/kernel/ptrace/ptrace.c
@@ -0,0 +1,481 @@
+/*
+ *  PowerPC version
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ *  Derived from "arch/m68k/kernel/ptrace.c"
+ *  Copyright (C) 1994 by Hamish Macdonald
+ *  Taken from linux/kernel/ptrace.c and modified for M680x0.
+ *  linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds
+ *
+ * Modified by Cort Dougan (cort@hq.fsmlabs.com)
+ * and Paul Mackerras (paulus@samba.org).
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file README.legal in the main directory of
+ * this archive for more details.
+ */
+
+#include <linux/regset.h>
+#include <linux/tracehook.h>
+#include <linux/audit.h>
+#include <linux/context_tracking.h>
+#include <linux/syscalls.h>
+
+#include <asm/switch_to.h>
+#include <asm/asm-prototypes.h>
+#include <asm/debug.h>
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/syscalls.h>
+
+#include "ptrace-decl.h"
+
+/*
+ * Called by kernel/ptrace.c when detaching..
+ *
+ * Make sure single step bits etc are not set.
+ */
+void ptrace_disable(struct task_struct *child)
+{
+	/* make sure the single step bit is not set. */
+	user_disable_single_step(child);
+}
+
+long arch_ptrace(struct task_struct *child, long request,
+		 unsigned long addr, unsigned long data)
+{
+	int ret = -EPERM;
+	void __user *datavp = (void __user *) data;
+	unsigned long __user *datalp = datavp;
+
+	switch (request) {
+	/* read the word at location addr in the USER area. */
+	case PTRACE_PEEKUSR: {
+		unsigned long index, tmp;
+
+		ret = -EIO;
+		/* convert to index and check */
+#ifdef CONFIG_PPC32
+		index = addr >> 2;
+		if ((addr & 3) || (index > PT_FPSCR)
+		    || (child->thread.regs == NULL))
+#else
+		index = addr >> 3;
+		if ((addr & 7) || (index > PT_FPSCR))
+#endif
+			break;
+
+		CHECK_FULL_REGS(child->thread.regs);
+		if (index < PT_FPR0) {
+			ret = ptrace_get_reg(child, (int) index, &tmp);
+			if (ret)
+				break;
+		} else {
+			unsigned int fpidx = index - PT_FPR0;
+
+			flush_fp_to_thread(child);
+			if (fpidx < (PT_FPSCR - PT_FPR0))
+				memcpy(&tmp, &child->thread.TS_FPR(fpidx),
+				       sizeof(long));
+			else
+				tmp = child->thread.fp_state.fpscr;
+		}
+		ret = put_user(tmp, datalp);
+		break;
+	}
+
+	/* write the word at location addr in the USER area */
+	case PTRACE_POKEUSR: {
+		unsigned long index;
+
+		ret = -EIO;
+		/* convert to index and check */
+#ifdef CONFIG_PPC32
+		index = addr >> 2;
+		if ((addr & 3) || (index > PT_FPSCR)
+		    || (child->thread.regs == NULL))
+#else
+		index = addr >> 3;
+		if ((addr & 7) || (index > PT_FPSCR))
+#endif
+			break;
+
+		CHECK_FULL_REGS(child->thread.regs);
+		if (index < PT_FPR0) {
+			ret = ptrace_put_reg(child, index, data);
+		} else {
+			unsigned int fpidx = index - PT_FPR0;
+
+			flush_fp_to_thread(child);
+			if (fpidx < (PT_FPSCR - PT_FPR0))
+				memcpy(&child->thread.TS_FPR(fpidx), &data,
+				       sizeof(long));
+			else
+				child->thread.fp_state.fpscr = data;
+			ret = 0;
+		}
+		break;
+	}
+
+	case PPC_PTRACE_GETHWDBGINFO: {
+		struct ppc_debug_info dbginfo;
+
+		ppc_gethwdinfo(&dbginfo);
+
+		if (copy_to_user(datavp, &dbginfo,
+				 sizeof(struct ppc_debug_info)))
+			return -EFAULT;
+		return 0;
+	}
+
+	case PPC_PTRACE_SETHWDEBUG: {
+		struct ppc_hw_breakpoint bp_info;
+
+		if (copy_from_user(&bp_info, datavp,
+				   sizeof(struct ppc_hw_breakpoint)))
+			return -EFAULT;
+		return ppc_set_hwdebug(child, &bp_info);
+	}
+
+	case PPC_PTRACE_DELHWDEBUG: {
+		ret = ppc_del_hwdebug(child, data);
+		break;
+	}
+
+	case PTRACE_GET_DEBUGREG:
+		ret = ptrace_get_debugreg(child, addr, datalp);
+		break;
+
+	case PTRACE_SET_DEBUGREG:
+		ret = ptrace_set_debugreg(child, addr, data);
+		break;
+
+#ifdef CONFIG_PPC64
+	case PTRACE_GETREGS64:
+#endif
+	case PTRACE_GETREGS:	/* Get all pt_regs from the child. */
+		return copy_regset_to_user(child, &user_ppc_native_view,
+					   REGSET_GPR,
+					   0, sizeof(struct user_pt_regs),
+					   datavp);
+
+#ifdef CONFIG_PPC64
+	case PTRACE_SETREGS64:
+#endif
+	case PTRACE_SETREGS:	/* Set all gp regs in the child. */
+		return copy_regset_from_user(child, &user_ppc_native_view,
+					     REGSET_GPR,
+					     0, sizeof(struct user_pt_regs),
+					     datavp);
+
+	case PTRACE_GETFPREGS: /* Get the child FPU state (FPR0...31 + FPSCR) */
+		return copy_regset_to_user(child, &user_ppc_native_view,
+					   REGSET_FPR,
+					   0, sizeof(elf_fpregset_t),
+					   datavp);
+
+	case PTRACE_SETFPREGS: /* Set the child FPU state (FPR0...31 + FPSCR) */
+		return copy_regset_from_user(child, &user_ppc_native_view,
+					     REGSET_FPR,
+					     0, sizeof(elf_fpregset_t),
+					     datavp);
+
+#ifdef CONFIG_ALTIVEC
+	case PTRACE_GETVRREGS:
+		return copy_regset_to_user(child, &user_ppc_native_view,
+					   REGSET_VMX,
+					   0, (33 * sizeof(vector128) +
+					       sizeof(u32)),
+					   datavp);
+
+	case PTRACE_SETVRREGS:
+		return copy_regset_from_user(child, &user_ppc_native_view,
+					     REGSET_VMX,
+					     0, (33 * sizeof(vector128) +
+						 sizeof(u32)),
+					     datavp);
+#endif
+#ifdef CONFIG_VSX
+	case PTRACE_GETVSRREGS:
+		return copy_regset_to_user(child, &user_ppc_native_view,
+					   REGSET_VSX,
+					   0, 32 * sizeof(double),
+					   datavp);
+
+	case PTRACE_SETVSRREGS:
+		return copy_regset_from_user(child, &user_ppc_native_view,
+					     REGSET_VSX,
+					     0, 32 * sizeof(double),
+					     datavp);
+#endif
+#ifdef CONFIG_SPE
+	case PTRACE_GETEVRREGS:
+		/* Get the child spe register state. */
+		return copy_regset_to_user(child, &user_ppc_native_view,
+					   REGSET_SPE, 0, 35 * sizeof(u32),
+					   datavp);
+
+	case PTRACE_SETEVRREGS:
+		/* Set the child spe register state. */
+		return copy_regset_from_user(child, &user_ppc_native_view,
+					     REGSET_SPE, 0, 35 * sizeof(u32),
+					     datavp);
+#endif
+
+	default:
+		ret = ptrace_request(child, request, addr, data);
+		break;
+	}
+	return ret;
+}
+
+#ifdef CONFIG_SECCOMP
+static int do_seccomp(struct pt_regs *regs)
+{
+	if (!test_thread_flag(TIF_SECCOMP))
+		return 0;
+
+	/*
+	 * The ABI we present to seccomp tracers is that r3 contains
+	 * the syscall return value and orig_gpr3 contains the first
+	 * syscall parameter. This is different to the ptrace ABI where
+	 * both r3 and orig_gpr3 contain the first syscall parameter.
+	 */
+	regs->gpr[3] = -ENOSYS;
+
+	/*
+	 * We use the __ version here because we have already checked
+	 * TIF_SECCOMP. If this fails, there is nothing left to do, we
+	 * have already loaded -ENOSYS into r3, or seccomp has put
+	 * something else in r3 (via SECCOMP_RET_ERRNO/TRACE).
+	 */
+	if (__secure_computing(NULL))
+		return -1;
+
+	/*
+	 * The syscall was allowed by seccomp, restore the register
+	 * state to what audit expects.
+	 * Note that we use orig_gpr3, which means a seccomp tracer can
+	 * modify the first syscall parameter (in orig_gpr3) and also
+	 * allow the syscall to proceed.
+	 */
+	regs->gpr[3] = regs->orig_gpr3;
+
+	return 0;
+}
+#else
+static inline int do_seccomp(struct pt_regs *regs) { return 0; }
+#endif /* CONFIG_SECCOMP */
+
+/**
+ * do_syscall_trace_enter() - Do syscall tracing on kernel entry.
+ * @regs: the pt_regs of the task to trace (current)
+ *
+ * Performs various types of tracing on syscall entry. This includes seccomp,
+ * ptrace, syscall tracepoints and audit.
+ *
+ * The pt_regs are potentially visible to userspace via ptrace, so their
+ * contents is ABI.
+ *
+ * One or more of the tracers may modify the contents of pt_regs, in particular
+ * to modify arguments or even the syscall number itself.
+ *
+ * It's also possible that a tracer can choose to reject the system call. In
+ * that case this function will return an illegal syscall number, and will put
+ * an appropriate return value in regs->r3.
+ *
+ * Return: the (possibly changed) syscall number.
+ */
+long do_syscall_trace_enter(struct pt_regs *regs)
+{
+	u32 flags;
+
+	user_exit();
+
+	flags = READ_ONCE(current_thread_info()->flags) &
+		(_TIF_SYSCALL_EMU | _TIF_SYSCALL_TRACE);
+
+	if (flags) {
+		int rc = tracehook_report_syscall_entry(regs);
+
+		if (unlikely(flags & _TIF_SYSCALL_EMU)) {
+			/*
+			 * A nonzero return code from
+			 * tracehook_report_syscall_entry() tells us to prevent
+			 * the syscall execution, but we are not going to
+			 * execute it anyway.
+			 *
+			 * Returning -1 will skip the syscall execution. We want
+			 * to avoid clobbering any registers, so we don't goto
+			 * the skip label below.
+			 */
+			return -1;
+		}
+
+		if (rc) {
+			/*
+			 * The tracer decided to abort the syscall. Note that
+			 * the tracer may also just change regs->gpr[0] to an
+			 * invalid syscall number, that is handled below on the
+			 * exit path.
+			 */
+			goto skip;
+		}
+	}
+
+	/* Run seccomp after ptrace; allow it to set gpr[3]. */
+	if (do_seccomp(regs))
+		return -1;
+
+	/* Avoid trace and audit when syscall is invalid. */
+	if (regs->gpr[0] >= NR_syscalls)
+		goto skip;
+
+	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
+		trace_sys_enter(regs, regs->gpr[0]);
+
+	if (!is_32bit_task())
+		audit_syscall_entry(regs->gpr[0], regs->gpr[3], regs->gpr[4],
+				    regs->gpr[5], regs->gpr[6]);
+	else
+		audit_syscall_entry(regs->gpr[0],
+				    regs->gpr[3] & 0xffffffff,
+				    regs->gpr[4] & 0xffffffff,
+				    regs->gpr[5] & 0xffffffff,
+				    regs->gpr[6] & 0xffffffff);
+
+	/* Return the possibly modified but valid syscall number */
+	return regs->gpr[0];
+
+skip:
+	/*
+	 * If we are aborting explicitly, or if the syscall number is
+	 * now invalid, set the return value to -ENOSYS.
+	 */
+	regs->gpr[3] = -ENOSYS;
+	return -1;
+}
+
+void do_syscall_trace_leave(struct pt_regs *regs)
+{
+	int step;
+
+	audit_syscall_exit(regs);
+
+	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
+		trace_sys_exit(regs, regs->result);
+
+	step = test_thread_flag(TIF_SINGLESTEP);
+	if (step || test_thread_flag(TIF_SYSCALL_TRACE))
+		tracehook_report_syscall_exit(regs, step);
+
+	user_enter();
+}
+
+void __init pt_regs_check(void);
+
+/*
+ * Dummy function, its purpose is to break the build if struct pt_regs and
+ * struct user_pt_regs don't match.
+ */
+void __init pt_regs_check(void)
+{
+	BUILD_BUG_ON(offsetof(struct pt_regs, gpr) !=
+		     offsetof(struct user_pt_regs, gpr));
+	BUILD_BUG_ON(offsetof(struct pt_regs, nip) !=
+		     offsetof(struct user_pt_regs, nip));
+	BUILD_BUG_ON(offsetof(struct pt_regs, msr) !=
+		     offsetof(struct user_pt_regs, msr));
+	BUILD_BUG_ON(offsetof(struct pt_regs, msr) !=
+		     offsetof(struct user_pt_regs, msr));
+	BUILD_BUG_ON(offsetof(struct pt_regs, orig_gpr3) !=
+		     offsetof(struct user_pt_regs, orig_gpr3));
+	BUILD_BUG_ON(offsetof(struct pt_regs, ctr) !=
+		     offsetof(struct user_pt_regs, ctr));
+	BUILD_BUG_ON(offsetof(struct pt_regs, link) !=
+		     offsetof(struct user_pt_regs, link));
+	BUILD_BUG_ON(offsetof(struct pt_regs, xer) !=
+		     offsetof(struct user_pt_regs, xer));
+	BUILD_BUG_ON(offsetof(struct pt_regs, ccr) !=
+		     offsetof(struct user_pt_regs, ccr));
+#ifdef __powerpc64__
+	BUILD_BUG_ON(offsetof(struct pt_regs, softe) !=
+		     offsetof(struct user_pt_regs, softe));
+#else
+	BUILD_BUG_ON(offsetof(struct pt_regs, mq) !=
+		     offsetof(struct user_pt_regs, mq));
+#endif
+	BUILD_BUG_ON(offsetof(struct pt_regs, trap) !=
+		     offsetof(struct user_pt_regs, trap));
+	BUILD_BUG_ON(offsetof(struct pt_regs, dar) !=
+		     offsetof(struct user_pt_regs, dar));
+	BUILD_BUG_ON(offsetof(struct pt_regs, dsisr) !=
+		     offsetof(struct user_pt_regs, dsisr));
+	BUILD_BUG_ON(offsetof(struct pt_regs, result) !=
+		     offsetof(struct user_pt_regs, result));
+
+	BUILD_BUG_ON(sizeof(struct user_pt_regs) > sizeof(struct pt_regs));
+
+	// Now check that the pt_regs offsets match the uapi #defines
+	#define CHECK_REG(_pt, _reg) \
+		BUILD_BUG_ON(_pt != (offsetof(struct user_pt_regs, _reg) / \
+				     sizeof(unsigned long)));
+
+	CHECK_REG(PT_R0,  gpr[0]);
+	CHECK_REG(PT_R1,  gpr[1]);
+	CHECK_REG(PT_R2,  gpr[2]);
+	CHECK_REG(PT_R3,  gpr[3]);
+	CHECK_REG(PT_R4,  gpr[4]);
+	CHECK_REG(PT_R5,  gpr[5]);
+	CHECK_REG(PT_R6,  gpr[6]);
+	CHECK_REG(PT_R7,  gpr[7]);
+	CHECK_REG(PT_R8,  gpr[8]);
+	CHECK_REG(PT_R9,  gpr[9]);
+	CHECK_REG(PT_R10, gpr[10]);
+	CHECK_REG(PT_R11, gpr[11]);
+	CHECK_REG(PT_R12, gpr[12]);
+	CHECK_REG(PT_R13, gpr[13]);
+	CHECK_REG(PT_R14, gpr[14]);
+	CHECK_REG(PT_R15, gpr[15]);
+	CHECK_REG(PT_R16, gpr[16]);
+	CHECK_REG(PT_R17, gpr[17]);
+	CHECK_REG(PT_R18, gpr[18]);
+	CHECK_REG(PT_R19, gpr[19]);
+	CHECK_REG(PT_R20, gpr[20]);
+	CHECK_REG(PT_R21, gpr[21]);
+	CHECK_REG(PT_R22, gpr[22]);
+	CHECK_REG(PT_R23, gpr[23]);
+	CHECK_REG(PT_R24, gpr[24]);
+	CHECK_REG(PT_R25, gpr[25]);
+	CHECK_REG(PT_R26, gpr[26]);
+	CHECK_REG(PT_R27, gpr[27]);
+	CHECK_REG(PT_R28, gpr[28]);
+	CHECK_REG(PT_R29, gpr[29]);
+	CHECK_REG(PT_R30, gpr[30]);
+	CHECK_REG(PT_R31, gpr[31]);
+	CHECK_REG(PT_NIP, nip);
+	CHECK_REG(PT_MSR, msr);
+	CHECK_REG(PT_ORIG_R3, orig_gpr3);
+	CHECK_REG(PT_CTR, ctr);
+	CHECK_REG(PT_LNK, link);
+	CHECK_REG(PT_XER, xer);
+	CHECK_REG(PT_CCR, ccr);
+#ifdef CONFIG_PPC64
+	CHECK_REG(PT_SOFTE, softe);
+#else
+	CHECK_REG(PT_MQ, mq);
+#endif
+	CHECK_REG(PT_TRAP, trap);
+	CHECK_REG(PT_DAR, dar);
+	CHECK_REG(PT_DSISR, dsisr);
+	CHECK_REG(PT_RESULT, result);
+	#undef CHECK_REG
+
+	BUILD_BUG_ON(PT_REGS_COUNT != sizeof(struct user_pt_regs) / sizeof(unsigned long));
+
+	/*
+	 * PT_DSCR isn't a real reg, but it's important that it doesn't overlap the
+	 * real registers.
+	 */
+	BUILD_BUG_ON(PT_DSCR < sizeof(struct user_pt_regs) / sizeof(unsigned long));
+}
diff --git a/arch/powerpc/kernel/ptrace/ptrace32.c b/arch/powerpc/kernel/ptrace/ptrace32.c
new file mode 100644
index 0000000..7976ddf
--- /dev/null
+++ b/arch/powerpc/kernel/ptrace/ptrace32.c
@@ -0,0 +1,307 @@
+/*
+ * ptrace for 32-bit processes running on a 64-bit kernel.
+ *
+ *  PowerPC version
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ *  Derived from "arch/m68k/kernel/ptrace.c"
+ *  Copyright (C) 1994 by Hamish Macdonald
+ *  Taken from linux/kernel/ptrace.c and modified for M680x0.
+ *  linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds
+ *
+ * Modified by Cort Dougan (cort@hq.fsmlabs.com)
+ * and Paul Mackerras (paulus@samba.org).
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of
+ * this archive for more details.
+ */
+
+#include <linux/ptrace.h>
+#include <linux/regset.h>
+#include <linux/compat.h>
+
+#include <asm/switch_to.h>
+
+/*
+ * does not yet catch signals sent when the child dies.
+ * in exit.c or in signal.c.
+ */
+
+/* Macros to workout the correct index for the FPR in the thread struct */
+#define FPRNUMBER(i) (((i) - PT_FPR0) >> 1)
+#define FPRHALF(i) (((i) - PT_FPR0) & 1)
+#define FPRINDEX(i) TS_FPRWIDTH * FPRNUMBER(i) * 2 + FPRHALF(i)
+
+long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
+			compat_ulong_t caddr, compat_ulong_t cdata)
+{
+	unsigned long addr = caddr;
+	unsigned long data = cdata;
+	int ret;
+
+	switch (request) {
+	/*
+	 * Read 4 bytes of the other process' storage
+	 *  data is a pointer specifying where the user wants the
+	 *	4 bytes copied into
+	 *  addr is a pointer in the user's storage that contains an 8 byte
+	 *	address in the other process of the 4 bytes that is to be read
+	 * (this is run in a 32-bit process looking at a 64-bit process)
+	 * when I and D space are separate, these will need to be fixed.
+	 */
+	case PPC_PTRACE_PEEKTEXT_3264:
+	case PPC_PTRACE_PEEKDATA_3264: {
+		u32 tmp;
+		int copied;
+		u32 __user * addrOthers;
+
+		ret = -EIO;
+
+		/* Get the addr in the other process that we want to read */
+		if (get_user(addrOthers, (u32 __user * __user *)addr) != 0)
+			break;
+
+		copied = ptrace_access_vm(child, (u64)addrOthers, &tmp,
+				sizeof(tmp), FOLL_FORCE);
+		if (copied != sizeof(tmp))
+			break;
+		ret = put_user(tmp, (u32 __user *)data);
+		break;
+	}
+
+	/* Read a register (specified by ADDR) out of the "user area" */
+	case PTRACE_PEEKUSR: {
+		int index;
+		unsigned long tmp;
+
+		ret = -EIO;
+		/* convert to index and check */
+		index = (unsigned long) addr >> 2;
+		if ((addr & 3) || (index > PT_FPSCR32))
+			break;
+
+		CHECK_FULL_REGS(child->thread.regs);
+		if (index < PT_FPR0) {
+			ret = ptrace_get_reg(child, index, &tmp);
+			if (ret)
+				break;
+		} else {
+			flush_fp_to_thread(child);
+			/*
+			 * the user space code considers the floating point
+			 * to be an array of unsigned int (32 bits) - the
+			 * index passed in is based on this assumption.
+			 */
+			tmp = ((unsigned int *)child->thread.fp_state.fpr)
+				[FPRINDEX(index)];
+		}
+		ret = put_user((unsigned int)tmp, (u32 __user *)data);
+		break;
+	}
+  
+	/*
+	 * Read 4 bytes out of the other process' pt_regs area
+	 *  data is a pointer specifying where the user wants the
+	 *	4 bytes copied into
+	 *  addr is the offset into the other process' pt_regs structure
+	 *	that is to be read
+	 * (this is run in a 32-bit process looking at a 64-bit process)
+	 */
+	case PPC_PTRACE_PEEKUSR_3264: {
+		u32 index;
+		u32 reg32bits;
+		u64 tmp;
+		u32 numReg;
+		u32 part;
+
+		ret = -EIO;
+		/* Determine which register the user wants */
+		index = (u64)addr >> 2;
+		numReg = index / 2;
+		/* Determine which part of the register the user wants */
+		if (index % 2)
+			part = 1;  /* want the 2nd half of the register (right-most). */
+		else
+			part = 0;  /* want the 1st half of the register (left-most). */
+
+		/* Validate the input - check to see if address is on the wrong boundary
+		 * or beyond the end of the user area
+		 */
+		if ((addr & 3) || numReg > PT_FPSCR)
+			break;
+
+		CHECK_FULL_REGS(child->thread.regs);
+		if (numReg >= PT_FPR0) {
+			flush_fp_to_thread(child);
+			/* get 64 bit FPR */
+			tmp = child->thread.fp_state.fpr[numReg - PT_FPR0][0];
+		} else { /* register within PT_REGS struct */
+			unsigned long tmp2;
+			ret = ptrace_get_reg(child, numReg, &tmp2);
+			if (ret)
+				break;
+			tmp = tmp2;
+		} 
+		reg32bits = ((u32*)&tmp)[part];
+		ret = put_user(reg32bits, (u32 __user *)data);
+		break;
+	}
+
+	/*
+	 * Write 4 bytes into the other process' storage
+	 *  data is the 4 bytes that the user wants written
+	 *  addr is a pointer in the user's storage that contains an
+	 *	8 byte address in the other process where the 4 bytes
+	 *	that is to be written
+	 * (this is run in a 32-bit process looking at a 64-bit process)
+	 * when I and D space are separate, these will need to be fixed.
+	 */
+	case PPC_PTRACE_POKETEXT_3264:
+	case PPC_PTRACE_POKEDATA_3264: {
+		u32 tmp = data;
+		u32 __user * addrOthers;
+
+		/* Get the addr in the other process that we want to write into */
+		ret = -EIO;
+		if (get_user(addrOthers, (u32 __user * __user *)addr) != 0)
+			break;
+		ret = 0;
+		if (ptrace_access_vm(child, (u64)addrOthers, &tmp,
+					sizeof(tmp),
+					FOLL_FORCE | FOLL_WRITE) == sizeof(tmp))
+			break;
+		ret = -EIO;
+		break;
+	}
+
+	/* write the word at location addr in the USER area */
+	case PTRACE_POKEUSR: {
+		unsigned long index;
+
+		ret = -EIO;
+		/* convert to index and check */
+		index = (unsigned long) addr >> 2;
+		if ((addr & 3) || (index > PT_FPSCR32))
+			break;
+
+		CHECK_FULL_REGS(child->thread.regs);
+		if (index < PT_FPR0) {
+			ret = ptrace_put_reg(child, index, data);
+		} else {
+			flush_fp_to_thread(child);
+			/*
+			 * the user space code considers the floating point
+			 * to be an array of unsigned int (32 bits) - the
+			 * index passed in is based on this assumption.
+			 */
+			((unsigned int *)child->thread.fp_state.fpr)
+				[FPRINDEX(index)] = data;
+			ret = 0;
+		}
+		break;
+	}
+
+	/*
+	 * Write 4 bytes into the other process' pt_regs area
+	 *  data is the 4 bytes that the user wants written
+	 *  addr is the offset into the other process' pt_regs structure
+	 *	that is to be written into
+	 * (this is run in a 32-bit process looking at a 64-bit process)
+	 */
+	case PPC_PTRACE_POKEUSR_3264: {
+		u32 index;
+		u32 numReg;
+
+		ret = -EIO;
+		/* Determine which register the user wants */
+		index = (u64)addr >> 2;
+		numReg = index / 2;
+
+		/*
+		 * Validate the input - check to see if address is on the
+		 * wrong boundary or beyond the end of the user area
+		 */
+		if ((addr & 3) || (numReg > PT_FPSCR))
+			break;
+		CHECK_FULL_REGS(child->thread.regs);
+		if (numReg < PT_FPR0) {
+			unsigned long freg;
+			ret = ptrace_get_reg(child, numReg, &freg);
+			if (ret)
+				break;
+			if (index % 2)
+				freg = (freg & ~0xfffffffful) | (data & 0xfffffffful);
+			else
+				freg = (freg & 0xfffffffful) | (data << 32);
+			ret = ptrace_put_reg(child, numReg, freg);
+		} else {
+			u64 *tmp;
+			flush_fp_to_thread(child);
+			/* get 64 bit FPR ... */
+			tmp = &child->thread.fp_state.fpr[numReg - PT_FPR0][0];
+			/* ... write the 32 bit part we want */
+			((u32 *)tmp)[index % 2] = data;
+			ret = 0;
+		}
+		break;
+	}
+
+	case PTRACE_GET_DEBUGREG: {
+#ifndef CONFIG_PPC_ADV_DEBUG_REGS
+		unsigned long dabr_fake;
+#endif
+		ret = -EINVAL;
+		/* We only support one DABR and no IABRS at the moment */
+		if (addr > 0)
+			break;
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
+		ret = put_user(child->thread.debug.dac1, (u32 __user *)data);
+#else
+		dabr_fake = (
+			(child->thread.hw_brk.address & (~HW_BRK_TYPE_DABR)) |
+			(child->thread.hw_brk.type & HW_BRK_TYPE_DABR));
+		ret = put_user(dabr_fake, (u32 __user *)data);
+#endif
+		break;
+	}
+
+	case PTRACE_GETREGS:	/* Get all pt_regs from the child. */
+		return copy_regset_to_user(
+			child, task_user_regset_view(current), 0,
+			0, PT_REGS_COUNT * sizeof(compat_long_t),
+			compat_ptr(data));
+
+	case PTRACE_SETREGS:	/* Set all gp regs in the child. */
+		return copy_regset_from_user(
+			child, task_user_regset_view(current), 0,
+			0, PT_REGS_COUNT * sizeof(compat_long_t),
+			compat_ptr(data));
+
+	case PTRACE_GETFPREGS:
+	case PTRACE_SETFPREGS:
+	case PTRACE_GETVRREGS:
+	case PTRACE_SETVRREGS:
+	case PTRACE_GETVSRREGS:
+	case PTRACE_SETVSRREGS:
+	case PTRACE_GETREGS64:
+	case PTRACE_SETREGS64:
+	case PTRACE_KILL:
+	case PTRACE_SINGLESTEP:
+	case PTRACE_DETACH:
+	case PTRACE_SET_DEBUGREG:
+	case PTRACE_SYSCALL:
+	case PTRACE_CONT:
+	case PPC_PTRACE_GETHWDBGINFO:
+	case PPC_PTRACE_SETHWDEBUG:
+	case PPC_PTRACE_DELHWDEBUG:
+		ret = arch_ptrace(child, request, addr, data);
+		break;
+
+	default:
+		ret = compat_ptrace_request(child, request, addr, data);
+		break;
+	}
+
+	return ret;
+}
diff --git a/arch/powerpc/kernel/ptrace32.c b/arch/powerpc/kernel/ptrace32.c
deleted file mode 100644
index f37eb53d..0000000
--- a/arch/powerpc/kernel/ptrace32.c
+++ /dev/null
@@ -1,318 +0,0 @@
-/*
- * ptrace for 32-bit processes running on a 64-bit kernel.
- *
- *  PowerPC version
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Derived from "arch/m68k/kernel/ptrace.c"
- *  Copyright (C) 1994 by Hamish Macdonald
- *  Taken from linux/kernel/ptrace.c and modified for M680x0.
- *  linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds
- *
- * Modified by Cort Dougan (cort@hq.fsmlabs.com)
- * and Paul Mackerras (paulus@samba.org).
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of
- * this archive for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/errno.h>
-#include <linux/ptrace.h>
-#include <linux/regset.h>
-#include <linux/user.h>
-#include <linux/security.h>
-#include <linux/signal.h>
-#include <linux/compat.h>
-
-#include <linux/uaccess.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/switch_to.h>
-
-/*
- * does not yet catch signals sent when the child dies.
- * in exit.c or in signal.c.
- */
-
-/* Macros to workout the correct index for the FPR in the thread struct */
-#define FPRNUMBER(i) (((i) - PT_FPR0) >> 1)
-#define FPRHALF(i) (((i) - PT_FPR0) & 1)
-#define FPRINDEX(i) TS_FPRWIDTH * FPRNUMBER(i) * 2 + FPRHALF(i)
-
-long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
-			compat_ulong_t caddr, compat_ulong_t cdata)
-{
-	unsigned long addr = caddr;
-	unsigned long data = cdata;
-	int ret;
-
-	switch (request) {
-	/*
-	 * Read 4 bytes of the other process' storage
-	 *  data is a pointer specifying where the user wants the
-	 *	4 bytes copied into
-	 *  addr is a pointer in the user's storage that contains an 8 byte
-	 *	address in the other process of the 4 bytes that is to be read
-	 * (this is run in a 32-bit process looking at a 64-bit process)
-	 * when I and D space are separate, these will need to be fixed.
-	 */
-	case PPC_PTRACE_PEEKTEXT_3264:
-	case PPC_PTRACE_PEEKDATA_3264: {
-		u32 tmp;
-		int copied;
-		u32 __user * addrOthers;
-
-		ret = -EIO;
-
-		/* Get the addr in the other process that we want to read */
-		if (get_user(addrOthers, (u32 __user * __user *)addr) != 0)
-			break;
-
-		copied = ptrace_access_vm(child, (u64)addrOthers, &tmp,
-				sizeof(tmp), FOLL_FORCE);
-		if (copied != sizeof(tmp))
-			break;
-		ret = put_user(tmp, (u32 __user *)data);
-		break;
-	}
-
-	/* Read a register (specified by ADDR) out of the "user area" */
-	case PTRACE_PEEKUSR: {
-		int index;
-		unsigned long tmp;
-
-		ret = -EIO;
-		/* convert to index and check */
-		index = (unsigned long) addr >> 2;
-		if ((addr & 3) || (index > PT_FPSCR32))
-			break;
-
-		CHECK_FULL_REGS(child->thread.regs);
-		if (index < PT_FPR0) {
-			ret = ptrace_get_reg(child, index, &tmp);
-			if (ret)
-				break;
-		} else {
-			flush_fp_to_thread(child);
-			/*
-			 * the user space code considers the floating point
-			 * to be an array of unsigned int (32 bits) - the
-			 * index passed in is based on this assumption.
-			 */
-			tmp = ((unsigned int *)child->thread.fp_state.fpr)
-				[FPRINDEX(index)];
-		}
-		ret = put_user((unsigned int)tmp, (u32 __user *)data);
-		break;
-	}
-  
-	/*
-	 * Read 4 bytes out of the other process' pt_regs area
-	 *  data is a pointer specifying where the user wants the
-	 *	4 bytes copied into
-	 *  addr is the offset into the other process' pt_regs structure
-	 *	that is to be read
-	 * (this is run in a 32-bit process looking at a 64-bit process)
-	 */
-	case PPC_PTRACE_PEEKUSR_3264: {
-		u32 index;
-		u32 reg32bits;
-		u64 tmp;
-		u32 numReg;
-		u32 part;
-
-		ret = -EIO;
-		/* Determine which register the user wants */
-		index = (u64)addr >> 2;
-		numReg = index / 2;
-		/* Determine which part of the register the user wants */
-		if (index % 2)
-			part = 1;  /* want the 2nd half of the register (right-most). */
-		else
-			part = 0;  /* want the 1st half of the register (left-most). */
-
-		/* Validate the input - check to see if address is on the wrong boundary
-		 * or beyond the end of the user area
-		 */
-		if ((addr & 3) || numReg > PT_FPSCR)
-			break;
-
-		CHECK_FULL_REGS(child->thread.regs);
-		if (numReg >= PT_FPR0) {
-			flush_fp_to_thread(child);
-			/* get 64 bit FPR */
-			tmp = child->thread.fp_state.fpr[numReg - PT_FPR0][0];
-		} else { /* register within PT_REGS struct */
-			unsigned long tmp2;
-			ret = ptrace_get_reg(child, numReg, &tmp2);
-			if (ret)
-				break;
-			tmp = tmp2;
-		} 
-		reg32bits = ((u32*)&tmp)[part];
-		ret = put_user(reg32bits, (u32 __user *)data);
-		break;
-	}
-
-	/*
-	 * Write 4 bytes into the other process' storage
-	 *  data is the 4 bytes that the user wants written
-	 *  addr is a pointer in the user's storage that contains an
-	 *	8 byte address in the other process where the 4 bytes
-	 *	that is to be written
-	 * (this is run in a 32-bit process looking at a 64-bit process)
-	 * when I and D space are separate, these will need to be fixed.
-	 */
-	case PPC_PTRACE_POKETEXT_3264:
-	case PPC_PTRACE_POKEDATA_3264: {
-		u32 tmp = data;
-		u32 __user * addrOthers;
-
-		/* Get the addr in the other process that we want to write into */
-		ret = -EIO;
-		if (get_user(addrOthers, (u32 __user * __user *)addr) != 0)
-			break;
-		ret = 0;
-		if (ptrace_access_vm(child, (u64)addrOthers, &tmp,
-					sizeof(tmp),
-					FOLL_FORCE | FOLL_WRITE) == sizeof(tmp))
-			break;
-		ret = -EIO;
-		break;
-	}
-
-	/* write the word at location addr in the USER area */
-	case PTRACE_POKEUSR: {
-		unsigned long index;
-
-		ret = -EIO;
-		/* convert to index and check */
-		index = (unsigned long) addr >> 2;
-		if ((addr & 3) || (index > PT_FPSCR32))
-			break;
-
-		CHECK_FULL_REGS(child->thread.regs);
-		if (index < PT_FPR0) {
-			ret = ptrace_put_reg(child, index, data);
-		} else {
-			flush_fp_to_thread(child);
-			/*
-			 * the user space code considers the floating point
-			 * to be an array of unsigned int (32 bits) - the
-			 * index passed in is based on this assumption.
-			 */
-			((unsigned int *)child->thread.fp_state.fpr)
-				[FPRINDEX(index)] = data;
-			ret = 0;
-		}
-		break;
-	}
-
-	/*
-	 * Write 4 bytes into the other process' pt_regs area
-	 *  data is the 4 bytes that the user wants written
-	 *  addr is the offset into the other process' pt_regs structure
-	 *	that is to be written into
-	 * (this is run in a 32-bit process looking at a 64-bit process)
-	 */
-	case PPC_PTRACE_POKEUSR_3264: {
-		u32 index;
-		u32 numReg;
-
-		ret = -EIO;
-		/* Determine which register the user wants */
-		index = (u64)addr >> 2;
-		numReg = index / 2;
-
-		/*
-		 * Validate the input - check to see if address is on the
-		 * wrong boundary or beyond the end of the user area
-		 */
-		if ((addr & 3) || (numReg > PT_FPSCR))
-			break;
-		CHECK_FULL_REGS(child->thread.regs);
-		if (numReg < PT_FPR0) {
-			unsigned long freg;
-			ret = ptrace_get_reg(child, numReg, &freg);
-			if (ret)
-				break;
-			if (index % 2)
-				freg = (freg & ~0xfffffffful) | (data & 0xfffffffful);
-			else
-				freg = (freg & 0xfffffffful) | (data << 32);
-			ret = ptrace_put_reg(child, numReg, freg);
-		} else {
-			u64 *tmp;
-			flush_fp_to_thread(child);
-			/* get 64 bit FPR ... */
-			tmp = &child->thread.fp_state.fpr[numReg - PT_FPR0][0];
-			/* ... write the 32 bit part we want */
-			((u32 *)tmp)[index % 2] = data;
-			ret = 0;
-		}
-		break;
-	}
-
-	case PTRACE_GET_DEBUGREG: {
-#ifndef CONFIG_PPC_ADV_DEBUG_REGS
-		unsigned long dabr_fake;
-#endif
-		ret = -EINVAL;
-		/* We only support one DABR and no IABRS at the moment */
-		if (addr > 0)
-			break;
-#ifdef CONFIG_PPC_ADV_DEBUG_REGS
-		ret = put_user(child->thread.debug.dac1, (u32 __user *)data);
-#else
-		dabr_fake = (
-			(child->thread.hw_brk.address & (~HW_BRK_TYPE_DABR)) |
-			(child->thread.hw_brk.type & HW_BRK_TYPE_DABR));
-		ret = put_user(dabr_fake, (u32 __user *)data);
-#endif
-		break;
-	}
-
-	case PTRACE_GETREGS:	/* Get all pt_regs from the child. */
-		return copy_regset_to_user(
-			child, task_user_regset_view(current), 0,
-			0, PT_REGS_COUNT * sizeof(compat_long_t),
-			compat_ptr(data));
-
-	case PTRACE_SETREGS:	/* Set all gp regs in the child. */
-		return copy_regset_from_user(
-			child, task_user_regset_view(current), 0,
-			0, PT_REGS_COUNT * sizeof(compat_long_t),
-			compat_ptr(data));
-
-	case PTRACE_GETFPREGS:
-	case PTRACE_SETFPREGS:
-	case PTRACE_GETVRREGS:
-	case PTRACE_SETVRREGS:
-	case PTRACE_GETVSRREGS:
-	case PTRACE_SETVSRREGS:
-	case PTRACE_GETREGS64:
-	case PTRACE_SETREGS64:
-	case PTRACE_KILL:
-	case PTRACE_SINGLESTEP:
-	case PTRACE_DETACH:
-	case PTRACE_SET_DEBUGREG:
-	case PTRACE_SYSCALL:
-	case PTRACE_CONT:
-	case PPC_PTRACE_GETHWDBGINFO:
-	case PPC_PTRACE_SETHWDEBUG:
-	case PPC_PTRACE_DELHWDEBUG:
-		ret = arch_ptrace(child, request, addr, data);
-		break;
-
-	default:
-		ret = compat_ptrace_request(child, request, addr, data);
-		break;
-	}
-
-	return ret;
-}
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 7f8c890..f9c0d88 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -787,8 +787,7 @@ EXPORT_SYMBOL(powerpc_debugfs_root);
 static int powerpc_debugfs_init(void)
 {
 	powerpc_debugfs_root = debugfs_create_dir("powerpc", NULL);
-
-	return powerpc_debugfs_root == NULL;
+	return 0;
 }
 arch_initcall(powerpc_debugfs_init);
 #endif
diff --git a/arch/powerpc/kernel/setup.h b/arch/powerpc/kernel/setup.h
index 2dd0d9c..2ec8355 100644
--- a/arch/powerpc/kernel/setup.h
+++ b/arch/powerpc/kernel/setup.h
@@ -8,6 +8,12 @@
 #ifndef __ARCH_POWERPC_KERNEL_SETUP_H
 #define __ARCH_POWERPC_KERNEL_SETUP_H
 
+#ifdef CONFIG_CC_IS_CLANG
+#define __nostackprotector
+#else
+#define __nostackprotector __attribute__((__optimize__("no-stack-protector")))
+#endif
+
 void initialize_cache_info(void);
 void irqstack_early_init(void);
 
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 5b49b26..305ca89 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -58,7 +58,6 @@ EXPORT_SYMBOL_GPL(boot_cpuid_phys);
 int smp_hw_index[NR_CPUS];
 EXPORT_SYMBOL(smp_hw_index);
 
-unsigned long ISA_DMA_THRESHOLD;
 unsigned int DMA_MODE_READ;
 unsigned int DMA_MODE_WRITE;
 
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index e05e6dd..438a9be 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -279,24 +279,42 @@ void __init record_spr_defaults(void)
  * device-tree is not accessible via normal means at this point.
  */
 
-void __init early_setup(unsigned long dt_ptr)
+void __init __nostackprotector early_setup(unsigned long dt_ptr)
 {
 	static __initdata struct paca_struct boot_paca;
 
 	/* -------- printk is _NOT_ safe to use here ! ------- */
 
-	/* Try new device tree based feature discovery ... */
-	if (!dt_cpu_ftrs_init(__va(dt_ptr)))
-		/* Otherwise use the old style CPU table */
-		identify_cpu(0, mfspr(SPRN_PVR));
-
-	/* Assume we're on cpu 0 for now. Don't write to the paca yet! */
+	/*
+	 * Assume we're on cpu 0 for now.
+	 *
+	 * We need to load a PACA very early for a few reasons.
+	 *
+	 * The stack protector canary is stored in the paca, so as soon as we
+	 * call any stack protected code we need r13 pointing somewhere valid.
+	 *
+	 * If we are using kcov it will call in_task() in its instrumentation,
+	 * which relies on the current task from the PACA.
+	 *
+	 * dt_cpu_ftrs_init() calls into generic OF/fdt code, as well as
+	 * printk(), which can trigger both stack protector and kcov.
+	 *
+	 * percpu variables and spin locks also use the paca.
+	 *
+	 * So set up a temporary paca. It will be replaced below once we know
+	 * what CPU we are on.
+	 */
 	initialise_paca(&boot_paca, 0);
 	setup_paca(&boot_paca);
 	fixup_boot_paca();
 
 	/* -------- printk is now safe to use ------- */
 
+	/* Try new device tree based feature discovery ... */
+	if (!dt_cpu_ftrs_init(__va(dt_ptr)))
+		/* Otherwise use the old style CPU table */
+		identify_cpu(0, mfspr(SPRN_PVR));
+
 	/* Enable early debugging if any specified (see udbg.h) */
 	udbg_early_init();
 
diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c
index d215f95..a264989 100644
--- a/arch/powerpc/kernel/signal.c
+++ b/arch/powerpc/kernel/signal.c
@@ -18,12 +18,153 @@
 #include <linux/syscalls.h>
 #include <asm/hw_breakpoint.h>
 #include <linux/uaccess.h>
+#include <asm/switch_to.h>
 #include <asm/unistd.h>
 #include <asm/debug.h>
 #include <asm/tm.h>
 
 #include "signal.h"
 
+#ifdef CONFIG_VSX
+unsigned long copy_fpr_to_user(void __user *to,
+			       struct task_struct *task)
+{
+	u64 buf[ELF_NFPREG];
+	int i;
+
+	/* save FPR copy to local buffer then write to the thread_struct */
+	for (i = 0; i < (ELF_NFPREG - 1) ; i++)
+		buf[i] = task->thread.TS_FPR(i);
+	buf[i] = task->thread.fp_state.fpscr;
+	return __copy_to_user(to, buf, ELF_NFPREG * sizeof(double));
+}
+
+unsigned long copy_fpr_from_user(struct task_struct *task,
+				 void __user *from)
+{
+	u64 buf[ELF_NFPREG];
+	int i;
+
+	if (__copy_from_user(buf, from, ELF_NFPREG * sizeof(double)))
+		return 1;
+	for (i = 0; i < (ELF_NFPREG - 1) ; i++)
+		task->thread.TS_FPR(i) = buf[i];
+	task->thread.fp_state.fpscr = buf[i];
+
+	return 0;
+}
+
+unsigned long copy_vsx_to_user(void __user *to,
+			       struct task_struct *task)
+{
+	u64 buf[ELF_NVSRHALFREG];
+	int i;
+
+	/* save FPR copy to local buffer then write to the thread_struct */
+	for (i = 0; i < ELF_NVSRHALFREG; i++)
+		buf[i] = task->thread.fp_state.fpr[i][TS_VSRLOWOFFSET];
+	return __copy_to_user(to, buf, ELF_NVSRHALFREG * sizeof(double));
+}
+
+unsigned long copy_vsx_from_user(struct task_struct *task,
+				 void __user *from)
+{
+	u64 buf[ELF_NVSRHALFREG];
+	int i;
+
+	if (__copy_from_user(buf, from, ELF_NVSRHALFREG * sizeof(double)))
+		return 1;
+	for (i = 0; i < ELF_NVSRHALFREG ; i++)
+		task->thread.fp_state.fpr[i][TS_VSRLOWOFFSET] = buf[i];
+	return 0;
+}
+
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+unsigned long copy_ckfpr_to_user(void __user *to,
+				  struct task_struct *task)
+{
+	u64 buf[ELF_NFPREG];
+	int i;
+
+	/* save FPR copy to local buffer then write to the thread_struct */
+	for (i = 0; i < (ELF_NFPREG - 1) ; i++)
+		buf[i] = task->thread.TS_CKFPR(i);
+	buf[i] = task->thread.ckfp_state.fpscr;
+	return __copy_to_user(to, buf, ELF_NFPREG * sizeof(double));
+}
+
+unsigned long copy_ckfpr_from_user(struct task_struct *task,
+					  void __user *from)
+{
+	u64 buf[ELF_NFPREG];
+	int i;
+
+	if (__copy_from_user(buf, from, ELF_NFPREG * sizeof(double)))
+		return 1;
+	for (i = 0; i < (ELF_NFPREG - 1) ; i++)
+		task->thread.TS_CKFPR(i) = buf[i];
+	task->thread.ckfp_state.fpscr = buf[i];
+
+	return 0;
+}
+
+unsigned long copy_ckvsx_to_user(void __user *to,
+				  struct task_struct *task)
+{
+	u64 buf[ELF_NVSRHALFREG];
+	int i;
+
+	/* save FPR copy to local buffer then write to the thread_struct */
+	for (i = 0; i < ELF_NVSRHALFREG; i++)
+		buf[i] = task->thread.ckfp_state.fpr[i][TS_VSRLOWOFFSET];
+	return __copy_to_user(to, buf, ELF_NVSRHALFREG * sizeof(double));
+}
+
+unsigned long copy_ckvsx_from_user(struct task_struct *task,
+					  void __user *from)
+{
+	u64 buf[ELF_NVSRHALFREG];
+	int i;
+
+	if (__copy_from_user(buf, from, ELF_NVSRHALFREG * sizeof(double)))
+		return 1;
+	for (i = 0; i < ELF_NVSRHALFREG ; i++)
+		task->thread.ckfp_state.fpr[i][TS_VSRLOWOFFSET] = buf[i];
+	return 0;
+}
+#endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
+#else
+inline unsigned long copy_fpr_to_user(void __user *to,
+				      struct task_struct *task)
+{
+	return __copy_to_user(to, task->thread.fp_state.fpr,
+			      ELF_NFPREG * sizeof(double));
+}
+
+inline unsigned long copy_fpr_from_user(struct task_struct *task,
+					void __user *from)
+{
+	return __copy_from_user(task->thread.fp_state.fpr, from,
+			      ELF_NFPREG * sizeof(double));
+}
+
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+inline unsigned long copy_ckfpr_to_user(void __user *to,
+					 struct task_struct *task)
+{
+	return __copy_to_user(to, task->thread.ckfp_state.fpr,
+			      ELF_NFPREG * sizeof(double));
+}
+
+inline unsigned long copy_ckfpr_from_user(struct task_struct *task,
+						 void __user *from)
+{
+	return __copy_from_user(task->thread.ckfp_state.fpr, from,
+				ELF_NFPREG * sizeof(double));
+}
+#endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
+#endif
+
 /* Log an error when sending an unhandled signal to a process. Controlled
  * through debug.exception-trace sysctl.
  */
@@ -106,7 +247,6 @@ static void do_signal(struct task_struct *tsk)
 	sigset_t *oldset = sigmask_to_save();
 	struct ksignal ksig = { .sig = 0 };
 	int ret;
-	int is32 = is_32bit_task();
 
 	BUG_ON(tsk != current);
 
@@ -136,7 +276,7 @@ static void do_signal(struct task_struct *tsk)
 
 	rseq_signal_deliver(&ksig, tsk->thread.regs);
 
-	if (is32) {
+	if (is_32bit_task()) {
         	if (ksig.ka.sa.sa_flags & SA_SIGINFO)
 			ret = handle_rt_signal32(&ksig, oldset, tsk);
 		else
diff --git a/arch/powerpc/kernel/signal.h b/arch/powerpc/kernel/signal.h
index 8004336..d396efc 100644
--- a/arch/powerpc/kernel/signal.h
+++ b/arch/powerpc/kernel/signal.h
@@ -10,8 +10,6 @@
 #ifndef _POWERPC_ARCH_SIGNAL_H
 #define _POWERPC_ARCH_SIGNAL_H
 
-extern void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags);
-
 extern void __user *get_sigframe(struct ksignal *ksig, unsigned long sp,
 				  size_t frame_size, int is_32);
 
diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c
index 1b090a7..4f96d29 100644
--- a/arch/powerpc/kernel/signal_32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -235,146 +235,6 @@ struct rt_sigframe {
 	int			abigap[56];
 };
 
-#ifdef CONFIG_VSX
-unsigned long copy_fpr_to_user(void __user *to,
-			       struct task_struct *task)
-{
-	u64 buf[ELF_NFPREG];
-	int i;
-
-	/* save FPR copy to local buffer then write to the thread_struct */
-	for (i = 0; i < (ELF_NFPREG - 1) ; i++)
-		buf[i] = task->thread.TS_FPR(i);
-	buf[i] = task->thread.fp_state.fpscr;
-	return __copy_to_user(to, buf, ELF_NFPREG * sizeof(double));
-}
-
-unsigned long copy_fpr_from_user(struct task_struct *task,
-				 void __user *from)
-{
-	u64 buf[ELF_NFPREG];
-	int i;
-
-	if (__copy_from_user(buf, from, ELF_NFPREG * sizeof(double)))
-		return 1;
-	for (i = 0; i < (ELF_NFPREG - 1) ; i++)
-		task->thread.TS_FPR(i) = buf[i];
-	task->thread.fp_state.fpscr = buf[i];
-
-	return 0;
-}
-
-unsigned long copy_vsx_to_user(void __user *to,
-			       struct task_struct *task)
-{
-	u64 buf[ELF_NVSRHALFREG];
-	int i;
-
-	/* save FPR copy to local buffer then write to the thread_struct */
-	for (i = 0; i < ELF_NVSRHALFREG; i++)
-		buf[i] = task->thread.fp_state.fpr[i][TS_VSRLOWOFFSET];
-	return __copy_to_user(to, buf, ELF_NVSRHALFREG * sizeof(double));
-}
-
-unsigned long copy_vsx_from_user(struct task_struct *task,
-				 void __user *from)
-{
-	u64 buf[ELF_NVSRHALFREG];
-	int i;
-
-	if (__copy_from_user(buf, from, ELF_NVSRHALFREG * sizeof(double)))
-		return 1;
-	for (i = 0; i < ELF_NVSRHALFREG ; i++)
-		task->thread.fp_state.fpr[i][TS_VSRLOWOFFSET] = buf[i];
-	return 0;
-}
-
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-unsigned long copy_ckfpr_to_user(void __user *to,
-				  struct task_struct *task)
-{
-	u64 buf[ELF_NFPREG];
-	int i;
-
-	/* save FPR copy to local buffer then write to the thread_struct */
-	for (i = 0; i < (ELF_NFPREG - 1) ; i++)
-		buf[i] = task->thread.TS_CKFPR(i);
-	buf[i] = task->thread.ckfp_state.fpscr;
-	return __copy_to_user(to, buf, ELF_NFPREG * sizeof(double));
-}
-
-unsigned long copy_ckfpr_from_user(struct task_struct *task,
-					  void __user *from)
-{
-	u64 buf[ELF_NFPREG];
-	int i;
-
-	if (__copy_from_user(buf, from, ELF_NFPREG * sizeof(double)))
-		return 1;
-	for (i = 0; i < (ELF_NFPREG - 1) ; i++)
-		task->thread.TS_CKFPR(i) = buf[i];
-	task->thread.ckfp_state.fpscr = buf[i];
-
-	return 0;
-}
-
-unsigned long copy_ckvsx_to_user(void __user *to,
-				  struct task_struct *task)
-{
-	u64 buf[ELF_NVSRHALFREG];
-	int i;
-
-	/* save FPR copy to local buffer then write to the thread_struct */
-	for (i = 0; i < ELF_NVSRHALFREG; i++)
-		buf[i] = task->thread.ckfp_state.fpr[i][TS_VSRLOWOFFSET];
-	return __copy_to_user(to, buf, ELF_NVSRHALFREG * sizeof(double));
-}
-
-unsigned long copy_ckvsx_from_user(struct task_struct *task,
-					  void __user *from)
-{
-	u64 buf[ELF_NVSRHALFREG];
-	int i;
-
-	if (__copy_from_user(buf, from, ELF_NVSRHALFREG * sizeof(double)))
-		return 1;
-	for (i = 0; i < ELF_NVSRHALFREG ; i++)
-		task->thread.ckfp_state.fpr[i][TS_VSRLOWOFFSET] = buf[i];
-	return 0;
-}
-#endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
-#else
-inline unsigned long copy_fpr_to_user(void __user *to,
-				      struct task_struct *task)
-{
-	return __copy_to_user(to, task->thread.fp_state.fpr,
-			      ELF_NFPREG * sizeof(double));
-}
-
-inline unsigned long copy_fpr_from_user(struct task_struct *task,
-					void __user *from)
-{
-	return __copy_from_user(task->thread.fp_state.fpr, from,
-			      ELF_NFPREG * sizeof(double));
-}
-
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-inline unsigned long copy_ckfpr_to_user(void __user *to,
-					 struct task_struct *task)
-{
-	return __copy_to_user(to, task->thread.ckfp_state.fpr,
-			      ELF_NFPREG * sizeof(double));
-}
-
-inline unsigned long copy_ckfpr_from_user(struct task_struct *task,
-						 void __user *from)
-{
-	return __copy_from_user(task->thread.ckfp_state.fpr, from,
-				ELF_NFPREG * sizeof(double));
-}
-#endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
-#endif
-
 /*
  * Save the current user registers on the user stack.
  * We only save the altivec/spe registers if the process has used
diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c
index 84ed2e7..adfde59 100644
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -473,8 +473,10 @@ static long restore_tm_sigcontexts(struct task_struct *tsk,
 	err |= __get_user(tsk->thread.ckpt_regs.ccr,
 			  &sc->gp_regs[PT_CCR]);
 
+	/* Don't allow userspace to set the trap value */
+	regs->trap = 0;
+
 	/* These regs are not checkpointed; they can go in 'regs'. */
-	err |= __get_user(regs->trap, &sc->gp_regs[PT_TRAP]);
 	err |= __get_user(regs->dar, &sc->gp_regs[PT_DAR]);
 	err |= __get_user(regs->dsisr, &sc->gp_regs[PT_DSISR]);
 	err |= __get_user(regs->result, &sc->gp_regs[PT_RESULT]);
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index ea6adbf..6d2a3a3 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -1185,10 +1185,30 @@ static inline void add_cpu_to_smallcore_masks(int cpu)
 	}
 }
 
+int get_physical_package_id(int cpu)
+{
+	int pkg_id = cpu_to_chip_id(cpu);
+
+	/*
+	 * If the platform is PowerNV or Guest on KVM, ibm,chip-id is
+	 * defined. Hence we would return the chip-id as the result of
+	 * get_physical_package_id.
+	 */
+	if (pkg_id == -1 && firmware_has_feature(FW_FEATURE_LPAR) &&
+	    IS_ENABLED(CONFIG_PPC_SPLPAR)) {
+		struct device_node *np = of_get_cpu_node(cpu, NULL);
+		pkg_id = of_node_to_nid(np);
+		of_node_put(np);
+	}
+
+	return pkg_id;
+}
+EXPORT_SYMBOL_GPL(get_physical_package_id);
+
 static void add_cpu_to_masks(int cpu)
 {
 	int first_thread = cpu_first_thread_sibling(cpu);
-	int chipid = cpu_to_chip_id(cpu);
+	int pkg_id = get_physical_package_id(cpu);
 	int i;
 
 	/*
@@ -1217,11 +1237,11 @@ static void add_cpu_to_masks(int cpu)
 	for_each_cpu(i, cpu_l2_cache_mask(cpu))
 		set_cpus_related(cpu, i, cpu_core_mask);
 
-	if (chipid == -1)
+	if (pkg_id == -1)
 		return;
 
 	for_each_cpu(i, cpu_online_mask)
-		if (cpu_to_chip_id(i) == chipid)
+		if (get_physical_package_id(i) == pkg_id)
 			set_cpus_related(cpu, i, cpu_core_mask);
 }
 
@@ -1359,11 +1379,6 @@ void __init smp_cpus_done(unsigned int max_cpus)
 	if (smp_ops && smp_ops->bringup_done)
 		smp_ops->bringup_done();
 
-	/*
-	 * On a shared LPAR, associativity needs to be requested.
-	 * Hence, get numa topology before dumping cpu topology
-	 */
-	shared_proc_topology_init();
 	dump_numa_cpu_topology();
 
 #ifdef CONFIG_SCHED_SMT
diff --git a/arch/powerpc/kernel/stacktrace.c b/arch/powerpc/kernel/stacktrace.c
index e2a46cf..c477b85 100644
--- a/arch/powerpc/kernel/stacktrace.c
+++ b/arch/powerpc/kernel/stacktrace.c
@@ -57,7 +57,7 @@ void save_stack_trace(struct stack_trace *trace)
 {
 	unsigned long sp;
 
-	sp = current_stack_pointer();
+	sp = current_stack_frame();
 
 	save_context_stack(trace, sp, current, 1);
 }
@@ -71,7 +71,7 @@ void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
 		return;
 
 	if (tsk == current)
-		sp = current_stack_pointer();
+		sp = current_stack_frame();
 	else
 		sp = tsk->thread.ksp;
 
@@ -131,7 +131,7 @@ static int __save_stack_trace_tsk_reliable(struct task_struct *tsk,
 	}
 
 	if (tsk == current)
-		sp = current_stack_pointer();
+		sp = current_stack_frame();
 	else
 		sp = tsk->thread.ksp;
 
diff --git a/arch/powerpc/kernel/syscall_64.c b/arch/powerpc/kernel/syscall_64.c
new file mode 100644
index 0000000..c74295a
--- /dev/null
+++ b/arch/powerpc/kernel/syscall_64.c
@@ -0,0 +1,377 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include <linux/err.h>
+#include <asm/asm-prototypes.h>
+#include <asm/book3s/64/kup-radix.h>
+#include <asm/cputime.h>
+#include <asm/hw_irq.h>
+#include <asm/kprobes.h>
+#include <asm/paca.h>
+#include <asm/ptrace.h>
+#include <asm/reg.h>
+#include <asm/signal.h>
+#include <asm/switch_to.h>
+#include <asm/syscall.h>
+#include <asm/time.h>
+#include <asm/unistd.h>
+
+typedef long (*syscall_fn)(long, long, long, long, long, long);
+
+/* Has to run notrace because it is entered not completely "reconciled" */
+notrace long system_call_exception(long r3, long r4, long r5,
+				   long r6, long r7, long r8,
+				   unsigned long r0, struct pt_regs *regs)
+{
+	syscall_fn f;
+
+	if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG))
+		BUG_ON(irq_soft_mask_return() != IRQS_ALL_DISABLED);
+
+	trace_hardirqs_off(); /* finish reconciling */
+
+	if (IS_ENABLED(CONFIG_PPC_BOOK3S))
+		BUG_ON(!(regs->msr & MSR_RI));
+	BUG_ON(!(regs->msr & MSR_PR));
+	BUG_ON(!FULL_REGS(regs));
+	BUG_ON(regs->softe != IRQS_ENABLED);
+
+	account_cpu_user_entry();
+
+#ifdef CONFIG_PPC_SPLPAR
+	if (IS_ENABLED(CONFIG_VIRT_CPU_ACCOUNTING_NATIVE) &&
+	    firmware_has_feature(FW_FEATURE_SPLPAR)) {
+		struct lppaca *lp = local_paca->lppaca_ptr;
+
+		if (unlikely(local_paca->dtl_ridx != be64_to_cpu(lp->dtl_idx)))
+			accumulate_stolen_time();
+	}
+#endif
+
+	kuap_check_amr();
+
+	/*
+	 * This is not required for the syscall exit path, but makes the
+	 * stack frame look nicer. If this was initialised in the first stack
+	 * frame, or if the unwinder was taught the first stack frame always
+	 * returns to user with IRQS_ENABLED, this store could be avoided!
+	 */
+	regs->softe = IRQS_ENABLED;
+
+	local_irq_enable();
+
+	if (unlikely(current_thread_info()->flags & _TIF_SYSCALL_DOTRACE)) {
+		/*
+		 * We use the return value of do_syscall_trace_enter() as the
+		 * syscall number. If the syscall was rejected for any reason
+		 * do_syscall_trace_enter() returns an invalid syscall number
+		 * and the test against NR_syscalls will fail and the return
+		 * value to be used is in regs->gpr[3].
+		 */
+		r0 = do_syscall_trace_enter(regs);
+		if (unlikely(r0 >= NR_syscalls))
+			return regs->gpr[3];
+		r3 = regs->gpr[3];
+		r4 = regs->gpr[4];
+		r5 = regs->gpr[5];
+		r6 = regs->gpr[6];
+		r7 = regs->gpr[7];
+		r8 = regs->gpr[8];
+
+	} else if (unlikely(r0 >= NR_syscalls)) {
+		return -ENOSYS;
+	}
+
+	/* May be faster to do array_index_nospec? */
+	barrier_nospec();
+
+	if (unlikely(is_32bit_task())) {
+		f = (void *)compat_sys_call_table[r0];
+
+		r3 &= 0x00000000ffffffffULL;
+		r4 &= 0x00000000ffffffffULL;
+		r5 &= 0x00000000ffffffffULL;
+		r6 &= 0x00000000ffffffffULL;
+		r7 &= 0x00000000ffffffffULL;
+		r8 &= 0x00000000ffffffffULL;
+
+	} else {
+		f = (void *)sys_call_table[r0];
+	}
+
+	return f(r3, r4, r5, r6, r7, r8);
+}
+
+/*
+ * This should be called after a syscall returns, with r3 the return value
+ * from the syscall. If this function returns non-zero, the system call
+ * exit assembly should additionally load all GPR registers and CTR and XER
+ * from the interrupt frame.
+ *
+ * The function graph tracer can not trace the return side of this function,
+ * because RI=0 and soft mask state is "unreconciled", so it is marked notrace.
+ */
+notrace unsigned long syscall_exit_prepare(unsigned long r3,
+					   struct pt_regs *regs)
+{
+	unsigned long *ti_flagsp = &current_thread_info()->flags;
+	unsigned long ti_flags;
+	unsigned long ret = 0;
+
+	regs->result = r3;
+
+	/* Check whether the syscall is issued inside a restartable sequence */
+	rseq_syscall(regs);
+
+	ti_flags = *ti_flagsp;
+
+	if (unlikely(r3 >= (unsigned long)-MAX_ERRNO)) {
+		if (likely(!(ti_flags & (_TIF_NOERROR | _TIF_RESTOREALL)))) {
+			r3 = -r3;
+			regs->ccr |= 0x10000000; /* Set SO bit in CR */
+		}
+	}
+
+	if (unlikely(ti_flags & _TIF_PERSYSCALL_MASK)) {
+		if (ti_flags & _TIF_RESTOREALL)
+			ret = _TIF_RESTOREALL;
+		else
+			regs->gpr[3] = r3;
+		clear_bits(_TIF_PERSYSCALL_MASK, ti_flagsp);
+	} else {
+		regs->gpr[3] = r3;
+	}
+
+	if (unlikely(ti_flags & _TIF_SYSCALL_DOTRACE)) {
+		do_syscall_trace_leave(regs);
+		ret |= _TIF_RESTOREALL;
+	}
+
+again:
+	local_irq_disable();
+	ti_flags = READ_ONCE(*ti_flagsp);
+	while (unlikely(ti_flags & (_TIF_USER_WORK_MASK & ~_TIF_RESTORE_TM))) {
+		local_irq_enable();
+		if (ti_flags & _TIF_NEED_RESCHED) {
+			schedule();
+		} else {
+			/*
+			 * SIGPENDING must restore signal handler function
+			 * argument GPRs, and some non-volatiles (e.g., r1).
+			 * Restore all for now. This could be made lighter.
+			 */
+			if (ti_flags & _TIF_SIGPENDING)
+				ret |= _TIF_RESTOREALL;
+			do_notify_resume(regs, ti_flags);
+		}
+		local_irq_disable();
+		ti_flags = READ_ONCE(*ti_flagsp);
+	}
+
+	if (IS_ENABLED(CONFIG_PPC_BOOK3S) && IS_ENABLED(CONFIG_PPC_FPU)) {
+		if (IS_ENABLED(CONFIG_PPC_TRANSACTIONAL_MEM) &&
+				unlikely((ti_flags & _TIF_RESTORE_TM))) {
+			restore_tm_state(regs);
+		} else {
+			unsigned long mathflags = MSR_FP;
+
+			if (cpu_has_feature(CPU_FTR_VSX))
+				mathflags |= MSR_VEC | MSR_VSX;
+			else if (cpu_has_feature(CPU_FTR_ALTIVEC))
+				mathflags |= MSR_VEC;
+
+			if ((regs->msr & mathflags) != mathflags)
+				restore_math(regs);
+		}
+	}
+
+	/* This must be done with RI=1 because tracing may touch vmaps */
+	trace_hardirqs_on();
+
+	/* This pattern matches prep_irq_for_idle */
+	__hard_EE_RI_disable();
+	if (unlikely(lazy_irq_pending())) {
+		__hard_RI_enable();
+		trace_hardirqs_off();
+		local_paca->irq_happened |= PACA_IRQ_HARD_DIS;
+		local_irq_enable();
+		/* Took an interrupt, may have more exit work to do. */
+		goto again;
+	}
+	local_paca->irq_happened = 0;
+	irq_soft_mask_set(IRQS_ENABLED);
+
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+	local_paca->tm_scratch = regs->msr;
+#endif
+
+	kuap_check_amr();
+
+	account_cpu_user_exit();
+
+	return ret;
+}
+
+#ifdef CONFIG_PPC_BOOK3S /* BOOK3E not yet using this */
+notrace unsigned long interrupt_exit_user_prepare(struct pt_regs *regs, unsigned long msr)
+{
+#ifdef CONFIG_PPC_BOOK3E
+	struct thread_struct *ts = &current->thread;
+#endif
+	unsigned long *ti_flagsp = &current_thread_info()->flags;
+	unsigned long ti_flags;
+	unsigned long flags;
+	unsigned long ret = 0;
+
+	if (IS_ENABLED(CONFIG_PPC_BOOK3S))
+		BUG_ON(!(regs->msr & MSR_RI));
+	BUG_ON(!(regs->msr & MSR_PR));
+	BUG_ON(!FULL_REGS(regs));
+	BUG_ON(regs->softe != IRQS_ENABLED);
+
+	local_irq_save(flags);
+
+again:
+	ti_flags = READ_ONCE(*ti_flagsp);
+	while (unlikely(ti_flags & (_TIF_USER_WORK_MASK & ~_TIF_RESTORE_TM))) {
+		local_irq_enable(); /* returning to user: may enable */
+		if (ti_flags & _TIF_NEED_RESCHED) {
+			schedule();
+		} else {
+			if (ti_flags & _TIF_SIGPENDING)
+				ret |= _TIF_RESTOREALL;
+			do_notify_resume(regs, ti_flags);
+		}
+		local_irq_disable();
+		ti_flags = READ_ONCE(*ti_flagsp);
+	}
+
+	if (IS_ENABLED(CONFIG_PPC_BOOK3S) && IS_ENABLED(CONFIG_PPC_FPU)) {
+		if (IS_ENABLED(CONFIG_PPC_TRANSACTIONAL_MEM) &&
+				unlikely((ti_flags & _TIF_RESTORE_TM))) {
+			restore_tm_state(regs);
+		} else {
+			unsigned long mathflags = MSR_FP;
+
+			if (cpu_has_feature(CPU_FTR_VSX))
+				mathflags |= MSR_VEC | MSR_VSX;
+			else if (cpu_has_feature(CPU_FTR_ALTIVEC))
+				mathflags |= MSR_VEC;
+
+			if ((regs->msr & mathflags) != mathflags)
+				restore_math(regs);
+		}
+	}
+
+	trace_hardirqs_on();
+	__hard_EE_RI_disable();
+	if (unlikely(lazy_irq_pending())) {
+		__hard_RI_enable();
+		trace_hardirqs_off();
+		local_paca->irq_happened |= PACA_IRQ_HARD_DIS;
+		local_irq_enable();
+		local_irq_disable();
+		/* Took an interrupt, may have more exit work to do. */
+		goto again;
+	}
+	local_paca->irq_happened = 0;
+	irq_soft_mask_set(IRQS_ENABLED);
+
+#ifdef CONFIG_PPC_BOOK3E
+	if (unlikely(ts->debug.dbcr0 & DBCR0_IDM)) {
+		/*
+		 * Check to see if the dbcr0 register is set up to debug.
+		 * Use the internal debug mode bit to do this.
+		 */
+		mtmsr(mfmsr() & ~MSR_DE);
+		mtspr(SPRN_DBCR0, ts->debug.dbcr0);
+		mtspr(SPRN_DBSR, -1);
+	}
+#endif
+
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+	local_paca->tm_scratch = regs->msr;
+#endif
+
+	kuap_check_amr();
+
+	account_cpu_user_exit();
+
+	return ret;
+}
+
+void unrecoverable_exception(struct pt_regs *regs);
+void preempt_schedule_irq(void);
+
+notrace unsigned long interrupt_exit_kernel_prepare(struct pt_regs *regs, unsigned long msr)
+{
+	unsigned long *ti_flagsp = &current_thread_info()->flags;
+	unsigned long flags;
+	unsigned long ret = 0;
+
+	if (IS_ENABLED(CONFIG_PPC_BOOK3S) && unlikely(!(regs->msr & MSR_RI)))
+		unrecoverable_exception(regs);
+	BUG_ON(regs->msr & MSR_PR);
+	BUG_ON(!FULL_REGS(regs));
+
+	if (unlikely(*ti_flagsp & _TIF_EMULATE_STACK_STORE)) {
+		clear_bits(_TIF_EMULATE_STACK_STORE, ti_flagsp);
+		ret = 1;
+	}
+
+	local_irq_save(flags);
+
+	if (regs->softe == IRQS_ENABLED) {
+		/* Returning to a kernel context with local irqs enabled. */
+		WARN_ON_ONCE(!(regs->msr & MSR_EE));
+again:
+		if (IS_ENABLED(CONFIG_PREEMPT)) {
+			/* Return to preemptible kernel context */
+			if (unlikely(*ti_flagsp & _TIF_NEED_RESCHED)) {
+				if (preempt_count() == 0)
+					preempt_schedule_irq();
+			}
+		}
+
+		trace_hardirqs_on();
+		__hard_EE_RI_disable();
+		if (unlikely(lazy_irq_pending())) {
+			__hard_RI_enable();
+			irq_soft_mask_set(IRQS_ALL_DISABLED);
+			trace_hardirqs_off();
+			local_paca->irq_happened |= PACA_IRQ_HARD_DIS;
+			/*
+			 * Can't local_irq_restore to replay if we were in
+			 * interrupt context. Must replay directly.
+			 */
+			if (irqs_disabled_flags(flags)) {
+				replay_soft_interrupts();
+			} else {
+				local_irq_restore(flags);
+				local_irq_save(flags);
+			}
+			/* Took an interrupt, may have more exit work to do. */
+			goto again;
+		}
+		local_paca->irq_happened = 0;
+		irq_soft_mask_set(IRQS_ENABLED);
+	} else {
+		/* Returning to a kernel context with local irqs disabled. */
+		__hard_EE_RI_disable();
+		if (regs->msr & MSR_EE)
+			local_paca->irq_happened &= ~PACA_IRQ_HARD_DIS;
+	}
+
+
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+	local_paca->tm_scratch = regs->msr;
+#endif
+
+	/*
+	 * We don't need to restore AMR on the way back to userspace for KUAP.
+	 * The value of AMR only matters while we're in the kernel.
+	 */
+	kuap_restore_amr(regs);
+
+	return ret;
+}
+#endif
diff --git a/arch/powerpc/kernel/syscalls/syscall.tbl b/arch/powerpc/kernel/syscalls/syscall.tbl
index 35b61bf..220ae11 100644
--- a/arch/powerpc/kernel/syscalls/syscall.tbl
+++ b/arch/powerpc/kernel/syscalls/syscall.tbl
@@ -9,7 +9,9 @@
 #
 0	nospu	restart_syscall			sys_restart_syscall
 1	nospu	exit				sys_exit
-2	nospu	fork				ppc_fork
+2	32	fork				ppc_fork			sys_fork
+2	64	fork				sys_fork
+2	spu	fork				sys_ni_syscall
 3	common	read				sys_read
 4	common	write				sys_write
 5	common	open				sys_open			compat_sys_open
@@ -158,7 +160,9 @@
 119	32	sigreturn			sys_sigreturn			compat_sys_sigreturn
 119	64	sigreturn			sys_ni_syscall
 119	spu	sigreturn			sys_ni_syscall
-120	nospu	clone				ppc_clone
+120	32	clone				ppc_clone			sys_clone
+120	64	clone				sys_clone
+120	spu	clone				sys_ni_syscall
 121	common	setdomainname			sys_setdomainname
 122	common	uname				sys_newuname
 123	common	modify_ldt			sys_ni_syscall
@@ -240,7 +244,9 @@
 186	spu	sendfile			sys_sendfile64
 187	common	getpmsg				sys_ni_syscall
 188	common 	putpmsg				sys_ni_syscall
-189	nospu	vfork				ppc_vfork
+189	32	vfork				ppc_vfork			sys_vfork
+189	64	vfork				sys_vfork
+189	spu	vfork				sys_ni_syscall
 190	common	ugetrlimit			sys_getrlimit			compat_sys_getrlimit
 191	common	readahead			sys_readahead			compat_sys_readahead
 192	32	mmap2				sys_mmap2			compat_sys_mmap2
@@ -316,8 +322,8 @@
 248	32	clock_nanosleep			sys_clock_nanosleep_time32
 248	64	clock_nanosleep			sys_clock_nanosleep
 248	spu	clock_nanosleep			sys_clock_nanosleep
-249	32	swapcontext			ppc_swapcontext			ppc32_swapcontext
-249	64	swapcontext			ppc64_swapcontext
+249	32	swapcontext			ppc_swapcontext			compat_sys_swapcontext
+249	64	swapcontext			sys_swapcontext
 249	spu	swapcontext			sys_ni_syscall
 250	common	tgkill				sys_tgkill
 251	32	utimes				sys_utimes_time32
@@ -456,7 +462,7 @@
 361	common	bpf				sys_bpf
 362	nospu	execveat			sys_execveat			compat_sys_execveat
 363	32	switch_endian			sys_ni_syscall
-363	64	switch_endian			ppc_switch_endian
+363	64	switch_endian			sys_switch_endian
 363	spu	switch_endian			sys_ni_syscall
 364	common	userfaultfd			sys_userfaultfd
 365	common	membarrier			sys_membarrier
@@ -516,6 +522,8 @@
 432	common	fsmount				sys_fsmount
 433	common	fspick				sys_fspick
 434	common	pidfd_open			sys_pidfd_open
-435	nospu	clone3				ppc_clone3
+435	32	clone3				ppc_clone3			sys_clone3
+435	64	clone3				sys_clone3
+435	spu	clone3				sys_ni_syscall
 437	common	openat2				sys_openat2
 438	common	pidfd_getfd			sys_pidfd_getfd
diff --git a/arch/powerpc/kernel/syscalls/syscallhdr.sh b/arch/powerpc/kernel/syscalls/syscallhdr.sh
index c0a9a32..02d6751f 100644
--- a/arch/powerpc/kernel/syscalls/syscallhdr.sh
+++ b/arch/powerpc/kernel/syscalls/syscallhdr.sh
@@ -32,6 +32,5 @@
 	printf "#define __NR_syscalls\t%s\n" "${nxt}"
 	printf "#endif\n"
 	printf "\n"
-	printf "#endif /* %s */" "${fileguard}"
-	printf "\n"
+	printf "#endif /* %s */\n" "${fileguard}"
 ) > "$out"
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index 80a676d..479c706 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -87,6 +87,155 @@ __setup("smt-snooze-delay=", setup_smt_snooze_delay);
 
 #endif /* CONFIG_PPC64 */
 
+#define __SYSFS_SPRSETUP_READ_WRITE(NAME, ADDRESS, EXTRA) \
+static void read_##NAME(void *val) \
+{ \
+	*(unsigned long *)val = mfspr(ADDRESS);	\
+} \
+static void write_##NAME(void *val) \
+{ \
+	EXTRA; \
+	mtspr(ADDRESS, *(unsigned long *)val);	\
+}
+
+#define __SYSFS_SPRSETUP_SHOW_STORE(NAME) \
+static ssize_t show_##NAME(struct device *dev, \
+			struct device_attribute *attr, \
+			char *buf) \
+{ \
+	struct cpu *cpu = container_of(dev, struct cpu, dev); \
+	unsigned long val; \
+	smp_call_function_single(cpu->dev.id, read_##NAME, &val, 1);	\
+	return sprintf(buf, "%lx\n", val); \
+} \
+static ssize_t __used \
+	store_##NAME(struct device *dev, struct device_attribute *attr, \
+			const char *buf, size_t count) \
+{ \
+	struct cpu *cpu = container_of(dev, struct cpu, dev); \
+	unsigned long val; \
+	int ret = sscanf(buf, "%lx", &val); \
+	if (ret != 1) \
+		return -EINVAL; \
+	smp_call_function_single(cpu->dev.id, write_##NAME, &val, 1); \
+	return count; \
+}
+
+#define SYSFS_PMCSETUP(NAME, ADDRESS) \
+	__SYSFS_SPRSETUP_READ_WRITE(NAME, ADDRESS, ppc_enable_pmcs()) \
+	__SYSFS_SPRSETUP_SHOW_STORE(NAME)
+#define SYSFS_SPRSETUP(NAME, ADDRESS) \
+	__SYSFS_SPRSETUP_READ_WRITE(NAME, ADDRESS, ) \
+	__SYSFS_SPRSETUP_SHOW_STORE(NAME)
+
+#define SYSFS_SPRSETUP_SHOW_STORE(NAME) \
+	__SYSFS_SPRSETUP_SHOW_STORE(NAME)
+
+#ifdef CONFIG_PPC64
+
+/*
+ * This is the system wide DSCR register default value. Any
+ * change to this default value through the sysfs interface
+ * will update all per cpu DSCR default values across the
+ * system stored in their respective PACA structures.
+ */
+static unsigned long dscr_default;
+
+/**
+ * read_dscr() - Fetch the cpu specific DSCR default
+ * @val:	Returned cpu specific DSCR default value
+ *
+ * This function returns the per cpu DSCR default value
+ * for any cpu which is contained in it's PACA structure.
+ */
+static void read_dscr(void *val)
+{
+	*(unsigned long *)val = get_paca()->dscr_default;
+}
+
+
+/**
+ * write_dscr() - Update the cpu specific DSCR default
+ * @val:	New cpu specific DSCR default value to update
+ *
+ * This function updates the per cpu DSCR default value
+ * for any cpu which is contained in it's PACA structure.
+ */
+static void write_dscr(void *val)
+{
+	get_paca()->dscr_default = *(unsigned long *)val;
+	if (!current->thread.dscr_inherit) {
+		current->thread.dscr = *(unsigned long *)val;
+		mtspr(SPRN_DSCR, *(unsigned long *)val);
+	}
+}
+
+SYSFS_SPRSETUP_SHOW_STORE(dscr);
+static DEVICE_ATTR(dscr, 0600, show_dscr, store_dscr);
+
+static void add_write_permission_dev_attr(struct device_attribute *attr)
+{
+	attr->attr.mode |= 0200;
+}
+
+/**
+ * show_dscr_default() - Fetch the system wide DSCR default
+ * @dev:	Device structure
+ * @attr:	Device attribute structure
+ * @buf:	Interface buffer
+ *
+ * This function returns the system wide DSCR default value.
+ */
+static ssize_t show_dscr_default(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%lx\n", dscr_default);
+}
+
+/**
+ * store_dscr_default() - Update the system wide DSCR default
+ * @dev:	Device structure
+ * @attr:	Device attribute structure
+ * @buf:	Interface buffer
+ * @count:	Size of the update
+ *
+ * This function updates the system wide DSCR default value.
+ */
+static ssize_t __used store_dscr_default(struct device *dev,
+		struct device_attribute *attr, const char *buf,
+		size_t count)
+{
+	unsigned long val;
+	int ret = 0;
+
+	ret = sscanf(buf, "%lx", &val);
+	if (ret != 1)
+		return -EINVAL;
+	dscr_default = val;
+
+	on_each_cpu(write_dscr, &val, 1);
+
+	return count;
+}
+
+static DEVICE_ATTR(dscr_default, 0600,
+		show_dscr_default, store_dscr_default);
+
+static void sysfs_create_dscr_default(void)
+{
+	if (cpu_has_feature(CPU_FTR_DSCR)) {
+		int err = 0;
+		int cpu;
+
+		dscr_default = spr_default_dscr;
+		for_each_possible_cpu(cpu)
+			paca_ptrs[cpu]->dscr_default = dscr_default;
+
+		err = device_create_file(cpu_subsys.dev_root, &dev_attr_dscr_default);
+	}
+}
+#endif /* CONFIG_PPC64 */
+
 #ifdef CONFIG_PPC_FSL_BOOK3E
 #define MAX_BIT				63
 
@@ -407,84 +556,35 @@ void ppc_enable_pmcs(void)
 }
 EXPORT_SYMBOL(ppc_enable_pmcs);
 
-#define __SYSFS_SPRSETUP_READ_WRITE(NAME, ADDRESS, EXTRA) \
-static void read_##NAME(void *val) \
-{ \
-	*(unsigned long *)val = mfspr(ADDRESS);	\
-} \
-static void write_##NAME(void *val) \
-{ \
-	EXTRA; \
-	mtspr(ADDRESS, *(unsigned long *)val);	\
-}
 
-#define __SYSFS_SPRSETUP_SHOW_STORE(NAME) \
-static ssize_t show_##NAME(struct device *dev, \
-			struct device_attribute *attr, \
-			char *buf) \
-{ \
-	struct cpu *cpu = container_of(dev, struct cpu, dev); \
-	unsigned long val; \
-	smp_call_function_single(cpu->dev.id, read_##NAME, &val, 1);	\
-	return sprintf(buf, "%lx\n", val); \
-} \
-static ssize_t __used \
-	store_##NAME(struct device *dev, struct device_attribute *attr, \
-			const char *buf, size_t count) \
-{ \
-	struct cpu *cpu = container_of(dev, struct cpu, dev); \
-	unsigned long val; \
-	int ret = sscanf(buf, "%lx", &val); \
-	if (ret != 1) \
-		return -EINVAL; \
-	smp_call_function_single(cpu->dev.id, write_##NAME, &val, 1); \
-	return count; \
-}
-
-#define SYSFS_PMCSETUP(NAME, ADDRESS) \
-	__SYSFS_SPRSETUP_READ_WRITE(NAME, ADDRESS, ppc_enable_pmcs()) \
-	__SYSFS_SPRSETUP_SHOW_STORE(NAME)
-#define SYSFS_SPRSETUP(NAME, ADDRESS) \
-	__SYSFS_SPRSETUP_READ_WRITE(NAME, ADDRESS, ) \
-	__SYSFS_SPRSETUP_SHOW_STORE(NAME)
-
-#define SYSFS_SPRSETUP_SHOW_STORE(NAME) \
-	__SYSFS_SPRSETUP_SHOW_STORE(NAME)
 
 /* Let's define all possible registers, we'll only hook up the ones
  * that are implemented on the current processor
  */
 
-#if defined(CONFIG_PPC64)
+#ifdef CONFIG_PMU_SYSFS
+#if defined(CONFIG_PPC64) || defined(CONFIG_PPC_BOOK3S_32)
 #define HAS_PPC_PMC_CLASSIC	1
 #define HAS_PPC_PMC_IBM		1
-#define HAS_PPC_PMC_PA6T	1
-#elif defined(CONFIG_PPC_BOOK3S_32)
-#define HAS_PPC_PMC_CLASSIC	1
-#define HAS_PPC_PMC_IBM		1
-#define HAS_PPC_PMC_G4		1
-#endif
-
-
-#ifdef HAS_PPC_PMC_CLASSIC
-SYSFS_PMCSETUP(mmcr0, SPRN_MMCR0);
-SYSFS_PMCSETUP(mmcr1, SPRN_MMCR1);
-SYSFS_PMCSETUP(pmc1, SPRN_PMC1);
-SYSFS_PMCSETUP(pmc2, SPRN_PMC2);
-SYSFS_PMCSETUP(pmc3, SPRN_PMC3);
-SYSFS_PMCSETUP(pmc4, SPRN_PMC4);
-SYSFS_PMCSETUP(pmc5, SPRN_PMC5);
-SYSFS_PMCSETUP(pmc6, SPRN_PMC6);
-
-#ifdef HAS_PPC_PMC_G4
-SYSFS_PMCSETUP(mmcr2, SPRN_MMCR2);
 #endif
 
 #ifdef CONFIG_PPC64
-SYSFS_PMCSETUP(pmc7, SPRN_PMC7);
-SYSFS_PMCSETUP(pmc8, SPRN_PMC8);
+#define HAS_PPC_PMC_PA6T	1
+#define HAS_PPC_PMC56          1
+#endif
 
-SYSFS_PMCSETUP(mmcra, SPRN_MMCRA);
+#ifdef CONFIG_PPC_BOOK3S_32
+#define HAS_PPC_PMC_G4		1
+#endif
+#endif /* CONFIG_PMU_SYSFS */
+
+#if defined(CONFIG_PPC64) && defined(CONFIG_DEBUG_MISC)
+#define HAS_PPC_PA6T
+#endif
+/*
+ * SPRs which are not related to PMU.
+ */
+#ifdef CONFIG_PPC64
 SYSFS_SPRSETUP(purr, SPRN_PURR);
 SYSFS_SPRSETUP(spurr, SPRN_SPURR);
 SYSFS_SPRSETUP(pir, SPRN_PIR);
@@ -495,116 +595,39 @@ SYSFS_SPRSETUP(tscr, SPRN_TSCR);
   enable write when needed with a separate function.
   Lets be conservative and default to pseries.
 */
-static DEVICE_ATTR(mmcra, 0600, show_mmcra, store_mmcra);
 static DEVICE_ATTR(spurr, 0400, show_spurr, NULL);
 static DEVICE_ATTR(purr, 0400, show_purr, store_purr);
 static DEVICE_ATTR(pir, 0400, show_pir, NULL);
 static DEVICE_ATTR(tscr, 0600, show_tscr, store_tscr);
-
-/*
- * This is the system wide DSCR register default value. Any
- * change to this default value through the sysfs interface
- * will update all per cpu DSCR default values across the
- * system stored in their respective PACA structures.
- */
-static unsigned long dscr_default;
-
-/**
- * read_dscr() - Fetch the cpu specific DSCR default
- * @val:	Returned cpu specific DSCR default value
- *
- * This function returns the per cpu DSCR default value
- * for any cpu which is contained in it's PACA structure.
- */
-static void read_dscr(void *val)
-{
-	*(unsigned long *)val = get_paca()->dscr_default;
-}
-
-
-/**
- * write_dscr() - Update the cpu specific DSCR default
- * @val:	New cpu specific DSCR default value to update
- *
- * This function updates the per cpu DSCR default value
- * for any cpu which is contained in it's PACA structure.
- */
-static void write_dscr(void *val)
-{
-	get_paca()->dscr_default = *(unsigned long *)val;
-	if (!current->thread.dscr_inherit) {
-		current->thread.dscr = *(unsigned long *)val;
-		mtspr(SPRN_DSCR, *(unsigned long *)val);
-	}
-}
-
-SYSFS_SPRSETUP_SHOW_STORE(dscr);
-static DEVICE_ATTR(dscr, 0600, show_dscr, store_dscr);
-
-static void add_write_permission_dev_attr(struct device_attribute *attr)
-{
-	attr->attr.mode |= 0200;
-}
-
-/**
- * show_dscr_default() - Fetch the system wide DSCR default
- * @dev:	Device structure
- * @attr:	Device attribute structure
- * @buf:	Interface buffer
- *
- * This function returns the system wide DSCR default value.
- */
-static ssize_t show_dscr_default(struct device *dev,
-		struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "%lx\n", dscr_default);
-}
-
-/**
- * store_dscr_default() - Update the system wide DSCR default
- * @dev:	Device structure
- * @attr:	Device attribute structure
- * @buf:	Interface buffer
- * @count:	Size of the update
- *
- * This function updates the system wide DSCR default value.
- */
-static ssize_t __used store_dscr_default(struct device *dev,
-		struct device_attribute *attr, const char *buf,
-		size_t count)
-{
-	unsigned long val;
-	int ret = 0;
-	
-	ret = sscanf(buf, "%lx", &val);
-	if (ret != 1)
-		return -EINVAL;
-	dscr_default = val;
-
-	on_each_cpu(write_dscr, &val, 1);
-
-	return count;
-}
-
-static DEVICE_ATTR(dscr_default, 0600,
-		show_dscr_default, store_dscr_default);
-
-static void sysfs_create_dscr_default(void)
-{
-	if (cpu_has_feature(CPU_FTR_DSCR)) {
-		int err = 0;
-		int cpu;
-
-		dscr_default = spr_default_dscr;
-		for_each_possible_cpu(cpu)
-			paca_ptrs[cpu]->dscr_default = dscr_default;
-
-		err = device_create_file(cpu_subsys.dev_root, &dev_attr_dscr_default);
-	}
-}
-
 #endif /* CONFIG_PPC64 */
 
+#ifdef HAS_PPC_PMC_CLASSIC
+SYSFS_PMCSETUP(mmcr0, SPRN_MMCR0);
+SYSFS_PMCSETUP(mmcr1, SPRN_MMCR1);
+SYSFS_PMCSETUP(pmc1, SPRN_PMC1);
+SYSFS_PMCSETUP(pmc2, SPRN_PMC2);
+SYSFS_PMCSETUP(pmc3, SPRN_PMC3);
+SYSFS_PMCSETUP(pmc4, SPRN_PMC4);
+SYSFS_PMCSETUP(pmc5, SPRN_PMC5);
+SYSFS_PMCSETUP(pmc6, SPRN_PMC6);
+#endif
+
+#ifdef HAS_PPC_PMC_G4
+SYSFS_PMCSETUP(mmcr2, SPRN_MMCR2);
+#endif
+
+#ifdef HAS_PPC_PMC56
+SYSFS_PMCSETUP(pmc7, SPRN_PMC7);
+SYSFS_PMCSETUP(pmc8, SPRN_PMC8);
+
+SYSFS_PMCSETUP(mmcra, SPRN_MMCRA);
+
+static DEVICE_ATTR(mmcra, 0600, show_mmcra, store_mmcra);
+#endif /* HAS_PPC_PMC56 */
+
+
+
+
 #ifdef HAS_PPC_PMC_PA6T
 SYSFS_PMCSETUP(pa6t_pmc0, SPRN_PA6T_PMC0);
 SYSFS_PMCSETUP(pa6t_pmc1, SPRN_PA6T_PMC1);
@@ -612,7 +635,9 @@ SYSFS_PMCSETUP(pa6t_pmc2, SPRN_PA6T_PMC2);
 SYSFS_PMCSETUP(pa6t_pmc3, SPRN_PA6T_PMC3);
 SYSFS_PMCSETUP(pa6t_pmc4, SPRN_PA6T_PMC4);
 SYSFS_PMCSETUP(pa6t_pmc5, SPRN_PA6T_PMC5);
-#ifdef CONFIG_DEBUG_MISC
+#endif
+
+#ifdef HAS_PPC_PA6T
 SYSFS_SPRSETUP(hid0, SPRN_HID0);
 SYSFS_SPRSETUP(hid1, SPRN_HID1);
 SYSFS_SPRSETUP(hid4, SPRN_HID4);
@@ -641,15 +666,14 @@ SYSFS_SPRSETUP(tsr0, SPRN_PA6T_TSR0);
 SYSFS_SPRSETUP(tsr1, SPRN_PA6T_TSR1);
 SYSFS_SPRSETUP(tsr2, SPRN_PA6T_TSR2);
 SYSFS_SPRSETUP(tsr3, SPRN_PA6T_TSR3);
-#endif /* CONFIG_DEBUG_MISC */
-#endif /* HAS_PPC_PMC_PA6T */
+#endif /* HAS_PPC_PA6T */
 
 #ifdef HAS_PPC_PMC_IBM
 static struct device_attribute ibm_common_attrs[] = {
 	__ATTR(mmcr0, 0600, show_mmcr0, store_mmcr0),
 	__ATTR(mmcr1, 0600, show_mmcr1, store_mmcr1),
 };
-#endif /* HAS_PPC_PMC_G4 */
+#endif /* HAS_PPC_PMC_IBM */
 
 #ifdef HAS_PPC_PMC_G4
 static struct device_attribute g4_common_attrs[] = {
@@ -659,6 +683,7 @@ static struct device_attribute g4_common_attrs[] = {
 };
 #endif /* HAS_PPC_PMC_G4 */
 
+#ifdef HAS_PPC_PMC_CLASSIC
 static struct device_attribute classic_pmc_attrs[] = {
 	__ATTR(pmc1, 0600, show_pmc1, store_pmc1),
 	__ATTR(pmc2, 0600, show_pmc2, store_pmc2),
@@ -666,14 +691,16 @@ static struct device_attribute classic_pmc_attrs[] = {
 	__ATTR(pmc4, 0600, show_pmc4, store_pmc4),
 	__ATTR(pmc5, 0600, show_pmc5, store_pmc5),
 	__ATTR(pmc6, 0600, show_pmc6, store_pmc6),
-#ifdef CONFIG_PPC64
+#ifdef HAS_PPC_PMC56
 	__ATTR(pmc7, 0600, show_pmc7, store_pmc7),
 	__ATTR(pmc8, 0600, show_pmc8, store_pmc8),
 #endif
 };
+#endif
 
-#ifdef HAS_PPC_PMC_PA6T
+#if defined(HAS_PPC_PMC_PA6T) || defined(HAS_PPC_PA6T)
 static struct device_attribute pa6t_attrs[] = {
+#ifdef HAS_PPC_PMC_PA6T
 	__ATTR(mmcr0, 0600, show_mmcr0, store_mmcr0),
 	__ATTR(mmcr1, 0600, show_mmcr1, store_mmcr1),
 	__ATTR(pmc0, 0600, show_pa6t_pmc0, store_pa6t_pmc0),
@@ -682,7 +709,8 @@ static struct device_attribute pa6t_attrs[] = {
 	__ATTR(pmc3, 0600, show_pa6t_pmc3, store_pa6t_pmc3),
 	__ATTR(pmc4, 0600, show_pa6t_pmc4, store_pa6t_pmc4),
 	__ATTR(pmc5, 0600, show_pa6t_pmc5, store_pa6t_pmc5),
-#ifdef CONFIG_DEBUG_MISC
+#endif
+#ifdef HAS_PPC_PA6T
 	__ATTR(hid0, 0600, show_hid0, store_hid0),
 	__ATTR(hid1, 0600, show_hid1, store_hid1),
 	__ATTR(hid4, 0600, show_hid4, store_hid4),
@@ -711,10 +739,9 @@ static struct device_attribute pa6t_attrs[] = {
 	__ATTR(tsr1, 0600, show_tsr1, store_tsr1),
 	__ATTR(tsr2, 0600, show_tsr2, store_tsr2),
 	__ATTR(tsr3, 0600, show_tsr3, store_tsr3),
-#endif /* CONFIG_DEBUG_MISC */
+#endif /* HAS_PPC_PA6T */
 };
-#endif /* HAS_PPC_PMC_PA6T */
-#endif /* HAS_PPC_PMC_CLASSIC */
+#endif
 
 #ifdef CONFIG_PPC_SVM
 static ssize_t show_svm(struct device *dev, struct device_attribute *attr, char *buf)
@@ -765,14 +792,14 @@ static int register_cpu_online(unsigned int cpu)
 		pmc_attrs = classic_pmc_attrs;
 		break;
 #endif /* HAS_PPC_PMC_G4 */
-#ifdef HAS_PPC_PMC_PA6T
+#if defined(HAS_PPC_PMC_PA6T) || defined(HAS_PPC_PA6T)
 	case PPC_PMC_PA6T:
 		/* PA Semi starts counting at PMC0 */
 		attrs = pa6t_attrs;
 		nattrs = sizeof(pa6t_attrs) / sizeof(struct device_attribute);
 		pmc_attrs = NULL;
 		break;
-#endif /* HAS_PPC_PMC_PA6T */
+#endif
 	default:
 		attrs = NULL;
 		nattrs = 0;
@@ -787,8 +814,10 @@ static int register_cpu_online(unsigned int cpu)
 			device_create_file(s, &pmc_attrs[i]);
 
 #ifdef CONFIG_PPC64
+#ifdef	CONFIG_PMU_SYSFS
 	if (cpu_has_feature(CPU_FTR_MMCRA))
 		device_create_file(s, &dev_attr_mmcra);
+#endif /* CONFIG_PMU_SYSFS */
 
 	if (cpu_has_feature(CPU_FTR_PURR)) {
 		if (!firmware_has_feature(FW_FEATURE_LPAR))
@@ -854,14 +883,14 @@ static int unregister_cpu_online(unsigned int cpu)
 		pmc_attrs = classic_pmc_attrs;
 		break;
 #endif /* HAS_PPC_PMC_G4 */
-#ifdef HAS_PPC_PMC_PA6T
+#if defined(HAS_PPC_PMC_PA6T) || defined(HAS_PPC_PA6T)
 	case PPC_PMC_PA6T:
 		/* PA Semi starts counting at PMC0 */
 		attrs = pa6t_attrs;
 		nattrs = sizeof(pa6t_attrs) / sizeof(struct device_attribute);
 		pmc_attrs = NULL;
 		break;
-#endif /* HAS_PPC_PMC_PA6T */
+#endif
 	default:
 		attrs = NULL;
 		nattrs = 0;
@@ -876,8 +905,10 @@ static int unregister_cpu_online(unsigned int cpu)
 			device_remove_file(s, &pmc_attrs[i]);
 
 #ifdef CONFIG_PPC64
+#ifdef CONFIG_PMU_SYSFS
 	if (cpu_has_feature(CPU_FTR_MMCRA))
 		device_remove_file(s, &dev_attr_mmcra);
+#endif /* CONFIG_PMU_SYSFS */
 
 	if (cpu_has_feature(CPU_FTR_PURR))
 		device_remove_file(s, &dev_attr_purr);
diff --git a/arch/powerpc/kernel/systbl.S b/arch/powerpc/kernel/systbl.S
index 5b905a2..d34276f 100644
--- a/arch/powerpc/kernel/systbl.S
+++ b/arch/powerpc/kernel/systbl.S
@@ -16,25 +16,22 @@
 
 #ifdef CONFIG_PPC64
 	.p2align	3
+#define __SYSCALL(nr, entry)	.8byte entry
+#else
+#define __SYSCALL(nr, entry)	.long entry
 #endif
 
 .globl sys_call_table
 sys_call_table:
 #ifdef CONFIG_PPC64
-#define __SYSCALL(nr, entry)	.8byte DOTSYM(entry)
 #include <asm/syscall_table_64.h>
-#undef __SYSCALL
 #else
-#define __SYSCALL(nr, entry)	.long entry
 #include <asm/syscall_table_32.h>
-#undef __SYSCALL
 #endif
 
 #ifdef CONFIG_COMPAT
 .globl compat_sys_call_table
 compat_sys_call_table:
 #define compat_sys_sigsuspend	sys_sigsuspend
-#define __SYSCALL(nr, entry)	.8byte DOTSYM(entry)
 #include <asm/syscall_table_c32.h>
-#undef __SYSCALL
 #endif
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 1168e8b3..6fcae43 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -50,7 +50,7 @@
 #include <linux/irq.h>
 #include <linux/delay.h>
 #include <linux/irq_work.h>
-#include <linux/clk-provider.h>
+#include <linux/of_clk.h>
 #include <linux/suspend.h>
 #include <linux/sched/cputime.h>
 #include <linux/processor.h>
@@ -522,35 +522,6 @@ static inline void clear_irq_work_pending(void)
 		"i" (offsetof(struct paca_struct, irq_work_pending)));
 }
 
-void arch_irq_work_raise(void)
-{
-	preempt_disable();
-	set_irq_work_pending_flag();
-	/*
-	 * Non-nmi code running with interrupts disabled will replay
-	 * irq_happened before it re-enables interrupts, so setthe
-	 * decrementer there instead of causing a hardware exception
-	 * which would immediately hit the masked interrupt handler
-	 * and have the net effect of setting the decrementer in
-	 * irq_happened.
-	 *
-	 * NMI interrupts can not check this when they return, so the
-	 * decrementer hardware exception is raised, which will fire
-	 * when interrupts are next enabled.
-	 *
-	 * BookE does not support this yet, it must audit all NMI
-	 * interrupt handlers to ensure they call nmi_enter() so this
-	 * check would be correct.
-	 */
-	if (IS_ENABLED(CONFIG_BOOKE) || !irqs_disabled() || in_nmi()) {
-		set_dec(1);
-	} else {
-		hard_irq_disable();
-		local_paca->irq_happened |= PACA_IRQ_DEC;
-	}
-	preempt_enable();
-}
-
 #else /* 32-bit */
 
 DEFINE_PER_CPU(u8, irq_work_pending);
@@ -559,16 +530,27 @@ DEFINE_PER_CPU(u8, irq_work_pending);
 #define test_irq_work_pending()		__this_cpu_read(irq_work_pending)
 #define clear_irq_work_pending()	__this_cpu_write(irq_work_pending, 0)
 
+#endif /* 32 vs 64 bit */
+
 void arch_irq_work_raise(void)
 {
+	/*
+	 * 64-bit code that uses irq soft-mask can just cause an immediate
+	 * interrupt here that gets soft masked, if this is called under
+	 * local_irq_disable(). It might be possible to prevent that happening
+	 * by noticing interrupts are disabled and setting decrementer pending
+	 * to be replayed when irqs are enabled. The problem there is that
+	 * tracing can call irq_work_raise, including in code that does low
+	 * level manipulations of irq soft-mask state (e.g., trace_hardirqs_on)
+	 * which could get tangled up if we're messing with the same state
+	 * here.
+	 */
 	preempt_disable();
 	set_irq_work_pending_flag();
 	set_dec(1);
 	preempt_enable();
 }
 
-#endif /* 32 vs 64 bit */
-
 #else  /* CONFIG_IRQ_WORK */
 
 #define test_irq_work_pending()	0
@@ -663,15 +645,6 @@ void timer_broadcast_interrupt(void)
 }
 #endif
 
-/*
- * Hypervisor decrementer interrupts shouldn't occur but are sometimes
- * left pending on exit from a KVM guest.  We don't need to do anything
- * to clear them, as they are edge-triggered.
- */
-void hdec_interrupt(struct pt_regs *regs)
-{
-}
-
 #ifdef CONFIG_SUSPEND
 static void generic_suspend_disable_irqs(void)
 {
@@ -1158,9 +1131,7 @@ void __init time_init(void)
 	init_decrementer_clockevent();
 	tick_setup_hrtimer_broadcast();
 
-#ifdef CONFIG_COMMON_CLK
 	of_clk_init(NULL);
-#endif
 }
 
 /*
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 82a3438..3fca222 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -2278,35 +2278,20 @@ void ppc_warn_emulated_print(const char *type)
 
 static int __init ppc_warn_emulated_init(void)
 {
-	struct dentry *dir, *d;
+	struct dentry *dir;
 	unsigned int i;
 	struct ppc_emulated_entry *entries = (void *)&ppc_emulated;
 
-	if (!powerpc_debugfs_root)
-		return -ENODEV;
-
 	dir = debugfs_create_dir("emulated_instructions",
 				 powerpc_debugfs_root);
-	if (!dir)
-		return -ENOMEM;
 
-	d = debugfs_create_u32("do_warn", 0644, dir,
-			       &ppc_warn_emulated);
-	if (!d)
-		goto fail;
+	debugfs_create_u32("do_warn", 0644, dir, &ppc_warn_emulated);
 
-	for (i = 0; i < sizeof(ppc_emulated)/sizeof(*entries); i++) {
-		d = debugfs_create_u32(entries[i].name, 0644, dir,
-				       (u32 *)&entries[i].val.counter);
-		if (!d)
-			goto fail;
-	}
+	for (i = 0; i < sizeof(ppc_emulated)/sizeof(*entries); i++)
+		debugfs_create_u32(entries[i].name, 0644, dir,
+				   (u32 *)&entries[i].val.counter);
 
 	return 0;
-
-fail:
-	debugfs_remove_recursive(dir);
-	return -ENOMEM;
 }
 
 device_initcall(ppc_warn_emulated_init);
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index b9a1084..f38f26e 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -391,12 +391,7 @@ static unsigned long __init find_function64(struct lib64_elfinfo *lib,
 		       symname);
 		return 0;
 	}
-#ifdef VDS64_HAS_DESCRIPTORS
-	return *((u64 *)(vdso64_kbase + sym->st_value - VDSO64_LBASE)) -
-		VDSO64_LBASE;
-#else
 	return sym->st_value - VDSO64_LBASE;
-#endif
 }
 
 static int __init vdso_do_func_patch64(struct lib32_elfinfo *v32,
@@ -656,7 +651,8 @@ static void __init vdso_setup_syscall_map(void)
 		if (sys_call_table[i] != sys_ni_syscall)
 			vdso_data->syscall_map_64[i >> 5] |=
 				0x80000000UL >> (i & 0x1f);
-		if (compat_sys_call_table[i] != sys_ni_syscall)
+		if (IS_ENABLED(CONFIG_COMPAT) &&
+		    compat_sys_call_table[i] != sys_ni_syscall)
 			vdso_data->syscall_map_32[i >> 5] |=
 				0x80000000UL >> (i & 0x1f);
 #else /* CONFIG_PPC64 */
diff --git a/arch/powerpc/kernel/vdso32/.gitignore b/arch/powerpc/kernel/vdso32/.gitignore
index fea58098..824b863e 100644
--- a/arch/powerpc/kernel/vdso32/.gitignore
+++ b/arch/powerpc/kernel/vdso32/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 vdso32.lds
 vdso32.so.dbg
diff --git a/arch/powerpc/kernel/vdso64/.gitignore b/arch/powerpc/kernel/vdso64/.gitignore
index 77a0b42..84151a7 100644
--- a/arch/powerpc/kernel/vdso64/.gitignore
+++ b/arch/powerpc/kernel/vdso64/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 vdso64.lds
 vdso64.so.dbg
diff --git a/arch/powerpc/kernel/vector.S b/arch/powerpc/kernel/vector.S
index 25c14a0..d20c5e7 100644
--- a/arch/powerpc/kernel/vector.S
+++ b/arch/powerpc/kernel/vector.S
@@ -134,7 +134,7 @@
 	/* enable use of VSX after return */
 	oris	r12,r12,MSR_VSX@h
 	std	r12,_MSR(r1)
-	b	fast_exception_return
+	b	fast_interrupt_return
 
 #endif /* CONFIG_VSX */
 
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index b4c89a1..31a0f20 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -256,6 +256,7 @@
 		*(.dynamic)
 	}
 	.hash : AT(ADDR(.hash) - LOAD_OFFSET) { *(.hash) }
+	.gnu.hash : AT(ADDR(.gnu.hash) - LOAD_OFFSET) { *(.gnu.hash) }
 	.interp : AT(ADDR(.interp) - LOAD_OFFSET) { *(.interp) }
 	.rela.dyn : AT(ADDR(.rela.dyn) - LOAD_OFFSET)
 	{
diff --git a/arch/powerpc/kexec/Makefile b/arch/powerpc/kexec/Makefile
index 378f610..86380c6 100644
--- a/arch/powerpc/kexec/Makefile
+++ b/arch/powerpc/kexec/Makefile
@@ -3,9 +3,6 @@
 # Makefile for the linux kernel.
 #
 
-# Avoid clang warnings around longjmp/setjmp declarations
-CFLAGS_crash.o += -ffreestanding
-
 obj-y				+= core.o crash.o core_$(BITS).o
 
 obj-$(CONFIG_PPC32)		+= relocate_32.o
diff --git a/arch/powerpc/kvm/Kconfig b/arch/powerpc/kvm/Kconfig
index 711fca9..12885ed 100644
--- a/arch/powerpc/kvm/Kconfig
+++ b/arch/powerpc/kvm/Kconfig
@@ -204,6 +204,4 @@
 	default y
 	depends on KVM_XICS && PPC_XIVE_NATIVE && KVM_BOOK3S_HV_POSSIBLE
 
-source "drivers/vhost/Kconfig"
-
 endif # VIRTUALIZATION
diff --git a/arch/powerpc/kvm/book3s_64_mmu_hv.c b/arch/powerpc/kvm/book3s_64_mmu_hv.c
index 20b7dce..2b35f9b 100644
--- a/arch/powerpc/kvm/book3s_64_mmu_hv.c
+++ b/arch/powerpc/kvm/book3s_64_mmu_hv.c
@@ -2134,9 +2134,8 @@ static const struct file_operations debugfs_htab_fops = {
 
 void kvmppc_mmu_debugfs_init(struct kvm *kvm)
 {
-	kvm->arch.htab_dentry = debugfs_create_file("htab", 0400,
-						    kvm->arch.debugfs_dir, kvm,
-						    &debugfs_htab_fops);
+	debugfs_create_file("htab", 0400, kvm->arch.debugfs_dir, kvm,
+			    &debugfs_htab_fops);
 }
 
 void kvmppc_mmu_book3s_hv_init(struct kvm_vcpu *vcpu)
diff --git a/arch/powerpc/kvm/book3s_64_mmu_radix.c b/arch/powerpc/kvm/book3s_64_mmu_radix.c
index 7bf94ba..aa12cd4 100644
--- a/arch/powerpc/kvm/book3s_64_mmu_radix.c
+++ b/arch/powerpc/kvm/book3s_64_mmu_radix.c
@@ -1377,9 +1377,8 @@ static const struct file_operations debugfs_radix_fops = {
 
 void kvmhv_radix_debugfs_init(struct kvm *kvm)
 {
-	kvm->arch.radix_dentry = debugfs_create_file("radix", 0400,
-						     kvm->arch.debugfs_dir, kvm,
-						     &debugfs_radix_fops);
+	debugfs_create_file("radix", 0400, kvm->arch.debugfs_dir, kvm,
+			    &debugfs_radix_fops);
 }
 
 int kvmppc_radix_init(void)
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index fa6e4fc..93493f0 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -2267,14 +2267,9 @@ static void debugfs_vcpu_init(struct kvm_vcpu *vcpu, unsigned int id)
 	struct kvm *kvm = vcpu->kvm;
 
 	snprintf(buf, sizeof(buf), "vcpu%u", id);
-	if (IS_ERR_OR_NULL(kvm->arch.debugfs_dir))
-		return;
 	vcpu->arch.debugfs_dir = debugfs_create_dir(buf, kvm->arch.debugfs_dir);
-	if (IS_ERR_OR_NULL(vcpu->arch.debugfs_dir))
-		return;
-	vcpu->arch.debugfs_timings =
-		debugfs_create_file("timings", 0444, vcpu->arch.debugfs_dir,
-				    vcpu, &debugfs_timings_ops);
+	debugfs_create_file("timings", 0444, vcpu->arch.debugfs_dir, vcpu,
+			    &debugfs_timings_ops);
 }
 
 #else /* CONFIG_KVM_BOOK3S_HV_EXIT_TIMING */
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index dbc2fec..780a499 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -1266,7 +1266,6 @@
 	 * R12		= (guest CR << 32) | interrupt vector
 	 * R13		= PACA
 	 * guest R12 saved in shadow VCPU SCRATCH0
-	 * guest CTR saved in shadow VCPU SCRATCH1 if RELOCATABLE
 	 * guest R13 saved in SPRN_SCRATCH0
 	 */
 	std	r9, HSTATE_SCRATCH2(r13)
@@ -1367,12 +1366,7 @@
 11:	stw	r3,VCPU_HEIR(r9)
 
 	/* these are volatile across C function calls */
-#ifdef CONFIG_RELOCATABLE
-	ld	r3, HSTATE_SCRATCH1(r13)
-	mtctr	r3
-#else
 	mfctr	r3
-#endif
 	mfxer	r4
 	std	r3, VCPU_CTR(r9)
 	std	r4, VCPU_XER(r9)
@@ -3258,7 +3252,6 @@
  * r12 is (CR << 32) | vector
  * r13 points to our PACA
  * r12 is saved in HSTATE_SCRATCH0(r13)
- * ctr is saved in HSTATE_SCRATCH1(r13) if RELOCATABLE
  * r9 is saved in HSTATE_SCRATCH2(r13)
  * r13 is saved in HSPRG1
  * cfar is saved in HSTATE_CFAR(r13)
@@ -3307,11 +3300,7 @@
 	ld	r5, HSTATE_CFAR(r13)
 	std	r5, ORIG_GPR3(r1)
 	mflr	r3
-#ifdef CONFIG_RELOCATABLE
-	ld	r4, HSTATE_SCRATCH1(r13)
-#else
 	mfctr	r4
-#endif
 	mfxer	r5
 	lbz	r6, PACAIRQSOFTMASK(r13)
 	std	r3, _LINK(r1)
diff --git a/arch/powerpc/kvm/book3s_segment.S b/arch/powerpc/kvm/book3s_segment.S
index 0169bab..1f492aa 100644
--- a/arch/powerpc/kvm/book3s_segment.S
+++ b/arch/powerpc/kvm/book3s_segment.S
@@ -167,16 +167,9 @@
 	 * R12             = (guest CR << 32) | exit handler id
 	 * R13             = PACA
 	 * HSTATE.SCRATCH0 = guest R12
-	 * HSTATE.SCRATCH1 = guest CTR if RELOCATABLE
 	 */
 #ifdef CONFIG_PPC64
 	/* Match 32-bit entry */
-#ifdef CONFIG_RELOCATABLE
-	std	r9, HSTATE_SCRATCH2(r13)
-	ld	r9, HSTATE_SCRATCH1(r13)
-	mtctr	r9
-	ld	r9, HSTATE_SCRATCH2(r13)
-#endif
 	rotldi	r12, r12, 32		  /* Flip R12 halves for stw */
 	stw	r12, HSTATE_SCRATCH1(r13) /* CR is now in the low half */
 	srdi	r12, r12, 32		  /* shift trap into low half */
diff --git a/arch/powerpc/kvm/e500_mmu_host.c b/arch/powerpc/kvm/e500_mmu_host.c
index 425d138..df9989c 100644
--- a/arch/powerpc/kvm/e500_mmu_host.c
+++ b/arch/powerpc/kvm/e500_mmu_host.c
@@ -422,7 +422,7 @@ static inline int kvmppc_e500_shadow_map(struct kvmppc_vcpu_e500 *vcpu_e500,
 				break;
 			}
 		} else if (vma && hva >= vma->vm_start &&
-			   (vma->vm_flags & VM_HUGETLB)) {
+			   is_vm_hugetlb_page(vma)) {
 			unsigned long psize = vma_kernel_pagesize(vma);
 
 			tsize = (gtlbe->mas1 & MAS1_TSIZE_MASK) >>
diff --git a/arch/powerpc/kvm/timing.c b/arch/powerpc/kvm/timing.c
index bfe4f10..ba56a5c 100644
--- a/arch/powerpc/kvm/timing.c
+++ b/arch/powerpc/kvm/timing.c
@@ -211,23 +211,14 @@ void kvmppc_create_vcpu_debugfs(struct kvm_vcpu *vcpu, unsigned int id)
 
 	snprintf(dbg_fname, sizeof(dbg_fname), "vm%u_vcpu%u_timing",
 		 current->pid, id);
-	debugfs_file = debugfs_create_file(dbg_fname, 0666,
-					kvm_debugfs_dir, vcpu,
-					&kvmppc_exit_timing_fops);
-
-	if (!debugfs_file) {
-		printk(KERN_ERR"%s: error creating debugfs file %s\n",
-			__func__, dbg_fname);
-		return;
-	}
+	debugfs_file = debugfs_create_file(dbg_fname, 0666, kvm_debugfs_dir,
+						vcpu, &kvmppc_exit_timing_fops);
 
 	vcpu->arch.debugfs_exit_timing = debugfs_file;
 }
 
 void kvmppc_remove_vcpu_debugfs(struct kvm_vcpu *vcpu)
 {
-	if (vcpu->arch.debugfs_exit_timing) {
-		debugfs_remove(vcpu->arch.debugfs_exit_timing);
-		vcpu->arch.debugfs_exit_timing = NULL;
-	}
+	debugfs_remove(vcpu->arch.debugfs_exit_timing);
+	vcpu->arch.debugfs_exit_timing = NULL;
 }
diff --git a/arch/powerpc/lib/sstep.c b/arch/powerpc/lib/sstep.c
index c077acb..5f3a7bd 100644
--- a/arch/powerpc/lib/sstep.c
+++ b/arch/powerpc/lib/sstep.c
@@ -3179,8 +3179,9 @@ int emulate_step(struct pt_regs *regs, unsigned int instr)
 		 * entry code works.  If that is changed, this will
 		 * need to be changed also.
 		 */
-		if (regs->gpr[0] == 0x1ebe &&
-		    cpu_has_feature(CPU_FTR_REAL_LE)) {
+		if (IS_ENABLED(CONFIG_PPC_FAST_ENDIAN_SWITCH) &&
+				cpu_has_feature(CPU_FTR_REAL_LE) &&
+				regs->gpr[0] == 0x1ebe) {
 			regs->msr ^= MSR_LE;
 			goto instr_done;
 		}
diff --git a/arch/powerpc/lib/test_emulate_step.c b/arch/powerpc/lib/test_emulate_step.c
index 4234706..53df414 100644
--- a/arch/powerpc/lib/test_emulate_step.c
+++ b/arch/powerpc/lib/test_emulate_step.c
@@ -13,19 +13,20 @@
 #include <asm/code-patching.h>
 
 #define IMM_L(i)		((uintptr_t)(i) & 0xffff)
+#define IMM_DS(i)		((uintptr_t)(i) & 0xfffc)
 
 /*
  * Defined with TEST_ prefix so it does not conflict with other
  * definitions.
  */
 #define TEST_LD(r, base, i)	(PPC_INST_LD | ___PPC_RT(r) |		\
-					___PPC_RA(base) | IMM_L(i))
+					___PPC_RA(base) | IMM_DS(i))
 #define TEST_LWZ(r, base, i)	(PPC_INST_LWZ | ___PPC_RT(r) |		\
 					___PPC_RA(base) | IMM_L(i))
 #define TEST_LWZX(t, a, b)	(PPC_INST_LWZX | ___PPC_RT(t) |		\
 					___PPC_RA(a) | ___PPC_RB(b))
 #define TEST_STD(r, base, i)	(PPC_INST_STD | ___PPC_RS(r) |		\
-					___PPC_RA(base) | ((i) & 0xfffc))
+					___PPC_RA(base) | IMM_DS(i))
 #define TEST_LDARX(t, a, b, eh)	(PPC_INST_LDARX | ___PPC_RT(t) |	\
 					___PPC_RA(a) | ___PPC_RB(b) |	\
 					__PPC_EH(eh))
@@ -160,7 +161,7 @@ static void __init test_std(void)
 
 	/* std r5, 0(r3) */
 	stepped = emulate_step(&regs, TEST_STD(5, 3, 0));
-	if (stepped == 1 || regs.gpr[5] == a)
+	if (stepped == 1 && regs.gpr[5] == a)
 		show_result("std", "PASS");
 	else
 		show_result("std", "FAIL");
diff --git a/arch/powerpc/mm/book3s32/hash_low.S b/arch/powerpc/mm/book3s32/hash_low.S
index 2015c4f..6d23608 100644
--- a/arch/powerpc/mm/book3s32/hash_low.S
+++ b/arch/powerpc/mm/book3s32/hash_low.S
@@ -35,7 +35,7 @@
 /*
  * Load a PTE into the hash table, if possible.
  * The address is in r4, and r3 contains an access flag:
- * _PAGE_RW (0x400) if a write.
+ * _PAGE_RW (0x002) if a write.
  * r9 contains the SRR1 value, from which we use the MSR_PR bit.
  * SPRG_THREAD contains the physical address of the current task's thread.
  *
@@ -69,7 +69,7 @@
 	blt+	112f			/* assume user more likely */
 	lis	r5, (swapper_pg_dir - PAGE_OFFSET)@ha	/* if kernel address, use */
 	addi	r5 ,r5 ,(swapper_pg_dir - PAGE_OFFSET)@l	/* kernel page table */
-	rlwimi	r3,r9,32-12,29,29	/* MSR_PR -> _PAGE_USER */
+	rlwimi	r3,r9,32-14,31,31	/* MSR_PR -> _PAGE_USER */
 112:
 #ifndef CONFIG_PTE_64BIT
 	rlwimi	r5,r4,12,20,29		/* insert top 10 bits of address */
@@ -94,7 +94,7 @@
 #else
 	rlwimi	r8,r4,23,20,28		/* compute pte address */
 #endif
-	rlwinm	r0,r3,32-3,24,24	/* _PAGE_RW access -> _PAGE_DIRTY */
+	rlwinm	r0,r3,6,24,24		/* _PAGE_RW access -> _PAGE_DIRTY */
 	ori	r0,r0,_PAGE_ACCESSED|_PAGE_HASHPTE
 
 	/*
@@ -310,11 +310,9 @@
 
 _GLOBAL(create_hpte)
 	/* Convert linux-style PTE (r5) to low word of PPC-style PTE (r8) */
-	rlwinm	r8,r5,32-9,30,30	/* _PAGE_RW -> PP msb */
 	rlwinm	r0,r5,32-6,30,30	/* _PAGE_DIRTY -> PP msb */
-	and	r8,r8,r0		/* writable if _RW & _DIRTY */
-	rlwimi	r5,r5,32-1,30,30	/* _PAGE_USER -> PP msb */
-	rlwimi	r5,r5,32-2,31,31	/* _PAGE_USER -> PP lsb */
+	and	r8,r5,r0		/* writable if _RW & _DIRTY */
+	rlwimi	r5,r5,1,30,30		/* _PAGE_USER -> PP msb */
 	ori	r8,r8,0xe04		/* clear out reserved bits */
 	andc	r8,r5,r8		/* PP = user? (rw&dirty? 1: 3): 0 */
 BEGIN_FTR_SECTION
@@ -566,7 +564,7 @@
 33:	lwarx	r8,0,r5			/* fetch the pte flags word */
 	andi.	r0,r8,_PAGE_HASHPTE
 	beq	8f			/* done if HASHPTE is already clear */
-	rlwinm	r8,r8,0,31,29		/* clear HASHPTE bit */
+	rlwinm	r8,r8,0,~_PAGE_HASHPTE	/* clear HASHPTE bit */
 	stwcx.	r8,0,r5			/* update the pte */
 	bne-	33b
 
@@ -690,18 +688,21 @@
 	bne-	10b
 	stwcx.	r8,0,r9
 	bne-	10b
+#endif /* CONFIG_SMP */
+	li	r5, 32
+	lis	r4, KERNELBASE@h
+	mtctr	r5
 	sync
-	tlbia
+0:	tlbie	r4
+	addi	r4, r4, 0x1000
+	bdnz	0b
 	sync
+#ifdef CONFIG_SMP
 	TLBSYNC
 	li	r0,0
 	stw	r0,0(r9)		/* clear mmu_hash_lock */
 	mtmsr	r10
 	SYNC_601
 	isync
-#else /* CONFIG_SMP */
-	sync
-	tlbia
-	sync
 #endif /* CONFIG_SMP */
 	blr
diff --git a/arch/powerpc/mm/book3s32/mmu.c b/arch/powerpc/mm/book3s32/mmu.c
index f888cbb..39ba53c 100644
--- a/arch/powerpc/mm/book3s32/mmu.c
+++ b/arch/powerpc/mm/book3s32/mmu.c
@@ -312,7 +312,7 @@ void hash_preload(struct mm_struct *mm, unsigned long ea)
 
 	if (!Hash)
 		return;
-	pmd = pmd_offset(pud_offset(pgd_offset(mm, ea), ea), ea);
+	pmd = pmd_ptr(mm, ea);
 	if (!pmd_none(*pmd))
 		add_hash_page(mm->context.id, ea, pmd_val(*pmd));
 }
diff --git a/arch/powerpc/mm/book3s32/tlb.c b/arch/powerpc/mm/book3s32/tlb.c
index 2fcd321..dc9039a 100644
--- a/arch/powerpc/mm/book3s32/tlb.c
+++ b/arch/powerpc/mm/book3s32/tlb.c
@@ -79,15 +79,18 @@ static void flush_range(struct mm_struct *mm, unsigned long start,
 	int count;
 	unsigned int ctx = mm->context.id;
 
+	start &= PAGE_MASK;
 	if (!Hash) {
-		_tlbia();
+		if (end - start <= PAGE_SIZE)
+			_tlbie(start);
+		else
+			_tlbia();
 		return;
 	}
-	start &= PAGE_MASK;
 	if (start >= end)
 		return;
 	end = (end - 1) | ~PAGE_MASK;
-	pmd = pmd_offset(pud_offset(pgd_offset(mm, start), start), start);
+	pmd = pmd_ptr(mm, start);
 	for (;;) {
 		pmd_end = ((start + PGDIR_SIZE) & PGDIR_MASK) - 1;
 		if (pmd_end > end)
@@ -145,7 +148,7 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
 		return;
 	}
 	mm = (vmaddr < TASK_SIZE)? vma->vm_mm: &init_mm;
-	pmd = pmd_offset(pud_offset(pgd_offset(mm, vmaddr), vmaddr), vmaddr);
+	pmd = pmd_ptr(mm, vmaddr);
 	if (!pmd_none(*pmd))
 		flush_hash_pages(mm->context.id, vmaddr, pmd_val(*pmd), 1);
 }
diff --git a/arch/powerpc/mm/book3s64/hash_utils.c b/arch/powerpc/mm/book3s64/hash_utils.c
index 523d4d3..8ed2411 100644
--- a/arch/powerpc/mm/book3s64/hash_utils.c
+++ b/arch/powerpc/mm/book3s64/hash_utils.c
@@ -809,7 +809,8 @@ int resize_hpt_for_hotplug(unsigned long new_mem_size)
 	return 0;
 }
 
-int hash__create_section_mapping(unsigned long start, unsigned long end, int nid)
+int hash__create_section_mapping(unsigned long start, unsigned long end,
+				 int nid, pgprot_t prot)
 {
 	int rc;
 
@@ -819,7 +820,7 @@ int hash__create_section_mapping(unsigned long start, unsigned long end, int nid
 	}
 
 	rc = htab_bolt_mapping(start, end, __pa(start),
-			       pgprot_val(PAGE_KERNEL), mmu_linear_psize,
+			       pgprot_val(prot), mmu_linear_psize,
 			       mmu_kernel_ssize);
 
 	if (rc < 0) {
@@ -2018,11 +2019,8 @@ DEFINE_DEBUGFS_ATTRIBUTE(fops_hpt_order, hpt_order_get, hpt_order_set, "%llu\n")
 
 static int __init hash64_debugfs(void)
 {
-	if (!debugfs_create_file_unsafe("hpt_order", 0600, powerpc_debugfs_root,
-					NULL, &fops_hpt_order)) {
-		pr_err("lpar: unable to create hpt_order debugsfs file\n");
-	}
-
+	debugfs_create_file("hpt_order", 0600, powerpc_debugfs_root, NULL,
+			    &fops_hpt_order);
 	return 0;
 }
 machine_device_initcall(pseries, hash64_debugfs);
diff --git a/arch/powerpc/mm/book3s64/iommu_api.c b/arch/powerpc/mm/book3s64/iommu_api.c
index eba73eb..fa05bbd1f 100644
--- a/arch/powerpc/mm/book3s64/iommu_api.c
+++ b/arch/powerpc/mm/book3s64/iommu_api.c
@@ -121,24 +121,6 @@ static long mm_iommu_do_alloc(struct mm_struct *mm, unsigned long ua,
 		goto free_exit;
 	}
 
-	pageshift = PAGE_SHIFT;
-	for (i = 0; i < entries; ++i) {
-		struct page *page = mem->hpages[i];
-
-		/*
-		 * Allow to use larger than 64k IOMMU pages. Only do that
-		 * if we are backed by hugetlb.
-		 */
-		if ((mem->pageshift > PAGE_SHIFT) && PageHuge(page))
-			pageshift = page_shift(compound_head(page));
-		mem->pageshift = min(mem->pageshift, pageshift);
-		/*
-		 * We don't need struct page reference any more, switch
-		 * to physical address.
-		 */
-		mem->hpas[i] = page_to_pfn(page) << PAGE_SHIFT;
-	}
-
 good_exit:
 	atomic64_set(&mem->mapped, 1);
 	mem->used = 1;
@@ -158,6 +140,27 @@ static long mm_iommu_do_alloc(struct mm_struct *mm, unsigned long ua,
 		}
 	}
 
+	if (mem->dev_hpa == MM_IOMMU_TABLE_INVALID_HPA) {
+		/*
+		 * Allow to use larger than 64k IOMMU pages. Only do that
+		 * if we are backed by hugetlb. Skip device memory as it is not
+		 * backed with page structs.
+		 */
+		pageshift = PAGE_SHIFT;
+		for (i = 0; i < entries; ++i) {
+			struct page *page = mem->hpages[i];
+
+			if ((mem->pageshift > PAGE_SHIFT) && PageHuge(page))
+				pageshift = page_shift(compound_head(page));
+			mem->pageshift = min(mem->pageshift, pageshift);
+			/*
+			 * We don't need struct page reference any more, switch
+			 * to physical address.
+			 */
+			mem->hpas[i] = page_to_pfn(page) << PAGE_SHIFT;
+		}
+	}
+
 	list_add_rcu(&mem->next, &mm->context.iommu_group_mem_list);
 
 	mutex_unlock(&mem_list_mutex);
diff --git a/arch/powerpc/mm/book3s64/pgtable.c b/arch/powerpc/mm/book3s64/pgtable.c
index 2bf7e1b..e0bb69c 100644
--- a/arch/powerpc/mm/book3s64/pgtable.c
+++ b/arch/powerpc/mm/book3s64/pgtable.c
@@ -171,12 +171,13 @@ void mmu_cleanup_all(void)
 }
 
 #ifdef CONFIG_MEMORY_HOTPLUG
-int __meminit create_section_mapping(unsigned long start, unsigned long end, int nid)
+int __meminit create_section_mapping(unsigned long start, unsigned long end,
+				     int nid, pgprot_t prot)
 {
 	if (radix_enabled())
-		return radix__create_section_mapping(start, end, nid);
+		return radix__create_section_mapping(start, end, nid, prot);
 
-	return hash__create_section_mapping(start, end, nid);
+	return hash__create_section_mapping(start, end, nid, prot);
 }
 
 int __meminit remove_section_mapping(unsigned long start, unsigned long end)
diff --git a/arch/powerpc/mm/book3s64/pkeys.c b/arch/powerpc/mm/book3s64/pkeys.c
index 07527f1..1199fc2 100644
--- a/arch/powerpc/mm/book3s64/pkeys.c
+++ b/arch/powerpc/mm/book3s64/pkeys.c
@@ -315,7 +315,7 @@ int __execute_only_pkey(struct mm_struct *mm)
 static inline bool vma_is_pkey_exec_only(struct vm_area_struct *vma)
 {
 	/* Do this check first since the vm_flags should be hot */
-	if ((vma->vm_flags & (VM_READ | VM_WRITE | VM_EXEC)) != VM_EXEC)
+	if ((vma->vm_flags & VM_ACCESS_FLAGS) != VM_EXEC)
 		return false;
 
 	return (vma_pkey(vma) == vma->vm_mm->context.execute_only_pkey);
diff --git a/arch/powerpc/mm/book3s64/radix_pgtable.c b/arch/powerpc/mm/book3s64/radix_pgtable.c
index dd1bea4..8f9edf0 100644
--- a/arch/powerpc/mm/book3s64/radix_pgtable.c
+++ b/arch/powerpc/mm/book3s64/radix_pgtable.c
@@ -26,6 +26,7 @@
 #include <asm/firmware.h>
 #include <asm/powernv.h>
 #include <asm/sections.h>
+#include <asm/smp.h>
 #include <asm/trace.h>
 #include <asm/uaccess.h>
 #include <asm/ultravisor.h>
@@ -253,7 +254,7 @@ static unsigned long next_boundary(unsigned long addr, unsigned long end)
 
 static int __meminit create_physical_mapping(unsigned long start,
 					     unsigned long end,
-					     int nid)
+					     int nid, pgprot_t _prot)
 {
 	unsigned long vaddr, addr, mapping_size = 0;
 	bool prev_exec, exec = false;
@@ -289,7 +290,7 @@ static int __meminit create_physical_mapping(unsigned long start,
 			prot = PAGE_KERNEL_X;
 			exec = true;
 		} else {
-			prot = PAGE_KERNEL;
+			prot = _prot;
 			exec = false;
 		}
 
@@ -333,7 +334,7 @@ static void __init radix_init_pgtable(void)
 
 		WARN_ON(create_physical_mapping(reg->base,
 						reg->base + reg->size,
-						-1));
+						-1, PAGE_KERNEL));
 	}
 
 	/* Find out how many PID bits are supported */
@@ -712,8 +713,10 @@ static int __meminit stop_machine_change_mapping(void *data)
 
 	spin_unlock(&init_mm.page_table_lock);
 	pte_clear(&init_mm, params->aligned_start, params->pte);
-	create_physical_mapping(__pa(params->aligned_start), __pa(params->start), -1);
-	create_physical_mapping(__pa(params->end), __pa(params->aligned_end), -1);
+	create_physical_mapping(__pa(params->aligned_start),
+				__pa(params->start), -1, PAGE_KERNEL);
+	create_physical_mapping(__pa(params->end), __pa(params->aligned_end),
+				-1, PAGE_KERNEL);
 	spin_lock(&init_mm.page_table_lock);
 	return 0;
 }
@@ -870,14 +873,16 @@ static void __meminit remove_pagetable(unsigned long start, unsigned long end)
 	radix__flush_tlb_kernel_range(start, end);
 }
 
-int __meminit radix__create_section_mapping(unsigned long start, unsigned long end, int nid)
+int __meminit radix__create_section_mapping(unsigned long start,
+					    unsigned long end, int nid,
+					    pgprot_t prot)
 {
 	if (end >= RADIX_VMALLOC_START) {
 		pr_warn("Outside the supported range\n");
 		return -1;
 	}
 
-	return create_physical_mapping(__pa(start), __pa(end), nid);
+	return create_physical_mapping(__pa(start), __pa(end), nid, prot);
 }
 
 int __meminit radix__remove_section_mapping(unsigned long start, unsigned long end)
diff --git a/arch/powerpc/mm/book3s64/radix_tlb.c b/arch/powerpc/mm/book3s64/radix_tlb.c
index 03f43c9..758ade2 100644
--- a/arch/powerpc/mm/book3s64/radix_tlb.c
+++ b/arch/powerpc/mm/book3s64/radix_tlb.c
@@ -587,6 +587,11 @@ void radix__local_flush_all_mm(struct mm_struct *mm)
 	preempt_enable();
 }
 EXPORT_SYMBOL(radix__local_flush_all_mm);
+
+static void __flush_all_mm(struct mm_struct *mm, bool fullmm)
+{
+	radix__local_flush_all_mm(mm);
+}
 #endif /* CONFIG_SMP */
 
 void radix__local_flush_tlb_page_psize(struct mm_struct *mm, unsigned long vmaddr,
@@ -777,7 +782,7 @@ void radix__flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
 EXPORT_SYMBOL(radix__flush_tlb_page);
 
 #else /* CONFIG_SMP */
-#define radix__flush_all_mm radix__local_flush_all_mm
+static inline void exit_flush_lazy_tlbs(struct mm_struct *mm) { }
 #endif /* CONFIG_SMP */
 
 static void do_tlbiel_kernel(void *info)
diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
index d15f0f0..84af6c8 100644
--- a/arch/powerpc/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -314,7 +314,7 @@ static bool access_error(bool is_write, bool is_exec,
 		return false;
 	}
 
-	if (unlikely(!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE))))
+	if (unlikely(!vma_is_accessible(vma)))
 		return true;
 	/*
 	 * We should ideally do the vma pkey access check here. But in the
diff --git a/arch/powerpc/mm/ioremap.c b/arch/powerpc/mm/ioremap.c
index fc66964..b1a0aeb 100644
--- a/arch/powerpc/mm/ioremap.c
+++ b/arch/powerpc/mm/ioremap.c
@@ -2,6 +2,7 @@
 
 #include <linux/io.h>
 #include <linux/slab.h>
+#include <linux/mmzone.h>
 #include <linux/vmalloc.h>
 #include <asm/io-workarounds.h>
 
@@ -97,3 +98,23 @@ void __iomem *do_ioremap(phys_addr_t pa, phys_addr_t offset, unsigned long size,
 
 	return NULL;
 }
+
+#ifdef CONFIG_ZONE_DEVICE
+/*
+ * Override the generic version in mm/memremap.c.
+ *
+ * With hash translation, the direct-map range is mapped with just one
+ * page size selected by htab_init_page_sizes(). Consult
+ * mmu_psize_defs[] to determine the minimum page size alignment.
+*/
+unsigned long memremap_compat_align(void)
+{
+	unsigned int shift = mmu_psize_defs[mmu_linear_psize].shift;
+
+	if (radix_enabled())
+		return SUBSECTION_SIZE;
+	return max(SUBSECTION_SIZE, 1UL << shift);
+
+}
+EXPORT_SYMBOL_GPL(memremap_compat_align);
+#endif
diff --git a/arch/powerpc/mm/kasan/kasan_init_32.c b/arch/powerpc/mm/kasan/kasan_init_32.c
index d2bed3f..cbcad36 100644
--- a/arch/powerpc/mm/kasan/kasan_init_32.c
+++ b/arch/powerpc/mm/kasan/kasan_init_32.c
@@ -36,7 +36,7 @@ static int __init kasan_init_shadow_page_tables(unsigned long k_start, unsigned
 	unsigned long k_cur, k_next;
 	pte_t *new = NULL;
 
-	pmd = pmd_offset(pud_offset(pgd_offset_k(k_start), k_start), k_start);
+	pmd = pmd_ptr_k(k_start);
 
 	for (k_cur = k_start; k_cur != k_end; k_cur = k_next, pmd++) {
 		k_next = pgd_addr_end(k_cur, k_end);
@@ -78,7 +78,7 @@ static int __init kasan_init_region(void *start, size_t size)
 	block = memblock_alloc(k_end - k_start, PAGE_SIZE);
 
 	for (k_cur = k_start & PAGE_MASK; k_cur < k_end; k_cur += PAGE_SIZE) {
-		pmd_t *pmd = pmd_offset(pud_offset(pgd_offset_k(k_cur), k_cur), k_cur);
+		pmd_t *pmd = pmd_ptr_k(k_cur);
 		void *va = block + k_cur - k_start;
 		pte_t pte = pfn_pte(PHYS_PFN(__pa(va)), PAGE_KERNEL);
 
@@ -101,8 +101,8 @@ static void __init kasan_remap_early_shadow_ro(void)
 
 	kasan_populate_pte(kasan_early_shadow_pte, prot);
 
-	for (k_cur = k_start & PAGE_MASK; k_cur < k_end; k_cur += PAGE_SIZE) {
-		pmd_t *pmd = pmd_offset(pud_offset(pgd_offset_k(k_cur), k_cur), k_cur);
+	for (k_cur = k_start & PAGE_MASK; k_cur != k_end; k_cur += PAGE_SIZE) {
+		pmd_t *pmd = pmd_ptr_k(k_cur);
 		pte_t *ptep = pte_offset_kernel(pmd, k_cur);
 
 		if ((pte_val(*ptep) & PTE_RPN_MASK) != pa)
@@ -196,7 +196,7 @@ void __init kasan_early_init(void)
 	unsigned long addr = KASAN_SHADOW_START;
 	unsigned long end = KASAN_SHADOW_END;
 	unsigned long next;
-	pmd_t *pmd = pmd_offset(pud_offset(pgd_offset_k(addr), addr), addr);
+	pmd_t *pmd = pmd_ptr_k(addr);
 
 	BUILD_BUG_ON(KASAN_SHADOW_START & ~PGDIR_MASK);
 
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 1c07d5a..041ed7c 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -66,12 +66,6 @@ pte_t *kmap_pte;
 EXPORT_SYMBOL(kmap_pte);
 pgprot_t kmap_prot;
 EXPORT_SYMBOL(kmap_prot);
-
-static inline pte_t *virt_to_kpte(unsigned long vaddr)
-{
-	return pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr),
-			vaddr), vaddr), vaddr);
-}
 #endif
 
 pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
@@ -96,7 +90,8 @@ int memory_add_physaddr_to_nid(u64 start)
 }
 #endif
 
-int __weak create_section_mapping(unsigned long start, unsigned long end, int nid)
+int __weak create_section_mapping(unsigned long start, unsigned long end,
+				  int nid, pgprot_t prot)
 {
 	return -ENODEV;
 }
@@ -128,7 +123,7 @@ static void flush_dcache_range_chunked(unsigned long start, unsigned long stop,
 }
 
 int __ref arch_add_memory(int nid, u64 start, u64 size,
-			struct mhp_restrictions *restrictions)
+			  struct mhp_params *params)
 {
 	unsigned long start_pfn = start >> PAGE_SHIFT;
 	unsigned long nr_pages = size >> PAGE_SHIFT;
@@ -137,14 +132,15 @@ int __ref arch_add_memory(int nid, u64 start, u64 size,
 	resize_hpt_for_hotplug(memblock_phys_mem_size());
 
 	start = (unsigned long)__va(start);
-	rc = create_section_mapping(start, start + size, nid);
+	rc = create_section_mapping(start, start + size, nid,
+				    params->pgprot);
 	if (rc) {
 		pr_warn("Unable to create mapping for hot added memory 0x%llx..0x%llx: %d\n",
 			start, start + size, rc);
 		return -EFAULT;
 	}
 
-	return __add_pages(nid, start_pfn, nr_pages, restrictions);
+	return __add_pages(nid, start_pfn, nr_pages, params);
 }
 
 void __ref arch_remove_memory(int nid, u64 start, u64 size,
diff --git a/arch/powerpc/mm/nohash/40x.c b/arch/powerpc/mm/nohash/40x.c
index f348104..8286272 100644
--- a/arch/powerpc/mm/nohash/40x.c
+++ b/arch/powerpc/mm/nohash/40x.c
@@ -104,7 +104,7 @@ unsigned long __init mmu_mapin_ram(unsigned long base, unsigned long top)
 		pmd_t *pmdp;
 		unsigned long val = p | _PMD_SIZE_16M | _PAGE_EXEC | _PAGE_HWWRITE;
 
-		pmdp = pmd_offset(pud_offset(pgd_offset_k(v), v), v);
+		pmdp = pmd_ptr_k(v);
 		*pmdp++ = __pmd(val);
 		*pmdp++ = __pmd(val);
 		*pmdp++ = __pmd(val);
@@ -119,7 +119,7 @@ unsigned long __init mmu_mapin_ram(unsigned long base, unsigned long top)
 		pmd_t *pmdp;
 		unsigned long val = p | _PMD_SIZE_4M | _PAGE_EXEC | _PAGE_HWWRITE;
 
-		pmdp = pmd_offset(pud_offset(pgd_offset_k(v), v), v);
+		pmdp = pmd_ptr_k(v);
 		*pmdp = __pmd(val);
 
 		v += LARGE_PAGE_SIZE_4M;
diff --git a/arch/powerpc/mm/nohash/tlb_low.S b/arch/powerpc/mm/nohash/tlb_low.S
index 2ca407c..eaeee40 100644
--- a/arch/powerpc/mm/nohash/tlb_low.S
+++ b/arch/powerpc/mm/nohash/tlb_low.S
@@ -397,7 +397,7 @@
  * extern void loadcam_entry(unsigned int index)
  *
  * Load TLBCAM[index] entry in to the L2 CAM MMU
- * Must preserve r7, r8, r9, and r10
+ * Must preserve r7, r8, r9, r10 and r11
  */
 _GLOBAL(loadcam_entry)
 	mflr	r5
@@ -433,6 +433,10 @@
  */
 _GLOBAL(loadcam_multi)
 	mflr	r8
+	/* Don't switch to AS=1 if already there */
+	mfmsr	r11
+	andi.	r11,r11,MSR_IS
+	bne	10f
 
 	/*
 	 * Set up temporary TLB entry that is the same as what we're
@@ -458,6 +462,7 @@
 	mtmsr	r6
 	isync
 
+10:
 	mr	r9,r3
 	add	r10,r3,r4
 2:	bl	loadcam_entry
@@ -466,6 +471,10 @@
 	mr	r3,r9
 	blt	2b
 
+	/* Don't return to AS=0 if we were in AS=1 at function start */
+	andi.	r11,r11,MSR_IS
+	bne	3f
+
 	/* Return to AS=0 and clear the temporary entry */
 	mfmsr	r6
 	rlwinm.	r6,r6,0,~(MSR_IS|MSR_DS)
@@ -481,6 +490,7 @@
 	tlbwe
 	isync
 
+3:
 	mtlr	r8
 	blr
 #endif
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 3c7dec7..9fcf2d1 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -461,25 +461,69 @@ static int of_drconf_to_nid_single(struct drmem_lmb *lmb)
 	return nid;
 }
 
+#ifdef CONFIG_PPC_SPLPAR
+static int vphn_get_nid(long lcpu)
+{
+	__be32 associativity[VPHN_ASSOC_BUFSIZE] = {0};
+	long rc, hwid;
+
+	/*
+	 * On a shared lpar, device tree will not have node associativity.
+	 * At this time lppaca, or its __old_status field may not be
+	 * updated. Hence kernel cannot detect if its on a shared lpar. So
+	 * request an explicit associativity irrespective of whether the
+	 * lpar is shared or dedicated. Use the device tree property as a
+	 * fallback. cpu_to_phys_id is only valid between
+	 * smp_setup_cpu_maps() and smp_setup_pacas().
+	 */
+	if (firmware_has_feature(FW_FEATURE_VPHN)) {
+		if (cpu_to_phys_id)
+			hwid = cpu_to_phys_id[lcpu];
+		else
+			hwid = get_hard_smp_processor_id(lcpu);
+
+		rc = hcall_vphn(hwid, VPHN_FLAG_VCPU, associativity);
+		if (rc == H_SUCCESS)
+			return associativity_to_nid(associativity);
+	}
+
+	return NUMA_NO_NODE;
+}
+#else
+static int vphn_get_nid(long unused)
+{
+	return NUMA_NO_NODE;
+}
+#endif  /* CONFIG_PPC_SPLPAR */
+
 /*
  * Figure out to which domain a cpu belongs and stick it there.
  * Return the id of the domain used.
  */
 static int numa_setup_cpu(unsigned long lcpu)
 {
-	int nid = NUMA_NO_NODE;
 	struct device_node *cpu;
+	int fcpu = cpu_first_thread_sibling(lcpu);
+	int nid = NUMA_NO_NODE;
 
 	/*
 	 * If a valid cpu-to-node mapping is already available, use it
 	 * directly instead of querying the firmware, since it represents
 	 * the most recent mapping notified to us by the platform (eg: VPHN).
+	 * Since cpu_to_node binding remains the same for all threads in the
+	 * core. If a valid cpu-to-node mapping is already available, for
+	 * the first thread in the core, use it.
 	 */
-	if ((nid = numa_cpu_lookup_table[lcpu]) >= 0) {
+	nid = numa_cpu_lookup_table[fcpu];
+	if (nid >= 0) {
 		map_cpu_to_node(lcpu, nid);
 		return nid;
 	}
 
+	nid = vphn_get_nid(lcpu);
+	if (nid != NUMA_NO_NODE)
+		goto out_present;
+
 	cpu = of_get_cpu_node(lcpu, NULL);
 
 	if (!cpu) {
@@ -491,13 +535,26 @@ static int numa_setup_cpu(unsigned long lcpu)
 	}
 
 	nid = of_node_to_nid_single(cpu);
+	of_node_put(cpu);
 
 out_present:
 	if (nid < 0 || !node_possible(nid))
 		nid = first_online_node;
 
+	/*
+	 * Update for the first thread of the core. All threads of a core
+	 * have to be part of the same node. This not only avoids querying
+	 * for every other thread in the core, but always avoids a case
+	 * where virtual node associativity change causes subsequent threads
+	 * of a core to be associated with different nid. However if first
+	 * thread is already online, expect it to have a valid mapping.
+	 */
+	if (fcpu != lcpu) {
+		WARN_ON(cpu_online(fcpu));
+		map_cpu_to_node(fcpu, nid);
+	}
+
 	map_cpu_to_node(lcpu, nid);
-	of_node_put(cpu);
 out:
 	return nid;
 }
@@ -1191,23 +1248,30 @@ static long vphn_get_associativity(unsigned long cpu,
 				VPHN_FLAG_VCPU, associativity);
 
 	switch (rc) {
-	case H_FUNCTION:
-		printk_once(KERN_INFO
-			"VPHN is not supported. Disabling polling...\n");
-		stop_topology_update();
-		break;
-	case H_HARDWARE:
-		printk(KERN_ERR
-			"hcall_vphn() experienced a hardware fault "
-			"preventing VPHN. Disabling polling...\n");
-		stop_topology_update();
-		break;
 	case H_SUCCESS:
 		dbg("VPHN hcall succeeded. Reset polling...\n");
 		timed_topology_update(0);
+		goto out;
+
+	case H_FUNCTION:
+		pr_err_ratelimited("VPHN unsupported. Disabling polling...\n");
+		break;
+	case H_HARDWARE:
+		pr_err_ratelimited("hcall_vphn() experienced a hardware fault "
+			"preventing VPHN. Disabling polling...\n");
+		break;
+	case H_PARAMETER:
+		pr_err_ratelimited("hcall_vphn() was passed an invalid parameter. "
+			"Disabling polling...\n");
+		break;
+	default:
+		pr_err_ratelimited("hcall_vphn() returned %ld. Disabling polling...\n"
+			, rc);
 		break;
 	}
 
+	stop_topology_update();
+out:
 	return rc;
 }
 
@@ -1568,15 +1632,6 @@ int prrn_is_enabled(void)
 	return prrn_enabled;
 }
 
-void __init shared_proc_topology_init(void)
-{
-	if (lppaca_shared_proc(get_lppaca())) {
-		bitmap_fill(cpumask_bits(&cpu_associativity_changes_mask),
-			    nr_cpumask_bits);
-		numa_update_cpu_topology(false);
-	}
-}
-
 static int topology_read(struct seq_file *file, void *v)
 {
 	if (vphn_enabled || prrn_enabled)
diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index 5fb90ed..f62de06 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -63,7 +63,7 @@ int __ref map_kernel_page(unsigned long va, phys_addr_t pa, pgprot_t prot)
 	int err = -ENOMEM;
 
 	/* Use upper 10 bits of VA to index the first level map */
-	pd = pmd_offset(pud_offset(pgd_offset_k(va), va), va);
+	pd = pmd_ptr_k(va);
 	/* Use middle 10 bits of VA to index the second-level map */
 	if (likely(slab_is_available()))
 		pg = pte_alloc_kernel(pd, va);
@@ -121,44 +121,9 @@ void __init mapin_ram(void)
 	}
 }
 
-/* Scan the real Linux page tables and return a PTE pointer for
- * a virtual address in a context.
- * Returns true (1) if PTE was found, zero otherwise.  The pointer to
- * the PTE pointer is unmodified if PTE is not found.
- */
-static int
-get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep, pmd_t **pmdp)
-{
-        pgd_t	*pgd;
-	pud_t	*pud;
-        pmd_t	*pmd;
-        pte_t	*pte;
-        int     retval = 0;
-
-        pgd = pgd_offset(mm, addr & PAGE_MASK);
-        if (pgd) {
-		pud = pud_offset(pgd, addr & PAGE_MASK);
-		if (pud && pud_present(*pud)) {
-			pmd = pmd_offset(pud, addr & PAGE_MASK);
-			if (pmd_present(*pmd)) {
-				pte = pte_offset_map(pmd, addr & PAGE_MASK);
-				if (pte) {
-					retval = 1;
-					*ptep = pte;
-					if (pmdp)
-						*pmdp = pmd;
-					/* XXX caller needs to do pte_unmap, yuck */
-				}
-			}
-		}
-        }
-        return(retval);
-}
-
 static int __change_page_attr_noflush(struct page *page, pgprot_t prot)
 {
 	pte_t *kpte;
-	pmd_t *kpmd;
 	unsigned long address;
 
 	BUG_ON(PageHighMem(page));
@@ -166,10 +131,10 @@ static int __change_page_attr_noflush(struct page *page, pgprot_t prot)
 
 	if (v_block_mapped(address))
 		return 0;
-	if (!get_pteptr(&init_mm, address, &kpte, &kpmd))
+	kpte = virt_to_kpte(address);
+	if (!kpte)
 		return -EINVAL;
 	__set_pte_at(&init_mm, address, kpte, mk_pte(page, prot), 0);
-	pte_unmap(kpte);
 
 	return 0;
 }
diff --git a/arch/powerpc/mm/ptdump/bats.c b/arch/powerpc/mm/ptdump/bats.c
index 4154fea..d3a5d6b 100644
--- a/arch/powerpc/mm/ptdump/bats.c
+++ b/arch/powerpc/mm/ptdump/bats.c
@@ -164,10 +164,8 @@ static const struct file_operations bats_fops = {
 
 static int __init bats_init(void)
 {
-	struct dentry *debugfs_file;
-
-	debugfs_file = debugfs_create_file("block_address_translation", 0400,
-					   powerpc_debugfs_root, NULL, &bats_fops);
-	return debugfs_file ? 0 : -ENOMEM;
+	debugfs_create_file("block_address_translation", 0400,
+			    powerpc_debugfs_root, NULL, &bats_fops);
+	return 0;
 }
 device_initcall(bats_init);
diff --git a/arch/powerpc/mm/ptdump/hashpagetable.c b/arch/powerpc/mm/ptdump/hashpagetable.c
index a072780..b6ed957 100644
--- a/arch/powerpc/mm/ptdump/hashpagetable.c
+++ b/arch/powerpc/mm/ptdump/hashpagetable.c
@@ -527,13 +527,10 @@ static const struct file_operations ptdump_fops = {
 
 static int ptdump_init(void)
 {
-	struct dentry *debugfs_file;
-
 	if (!radix_enabled()) {
 		populate_markers();
-		debugfs_file = debugfs_create_file("kernel_hash_pagetable",
-				0400, NULL, NULL, &ptdump_fops);
-		return debugfs_file ? 0 : -ENOMEM;
+		debugfs_create_file("kernel_hash_pagetable", 0400, NULL, NULL,
+				    &ptdump_fops);
 	}
 	return 0;
 }
diff --git a/arch/powerpc/mm/ptdump/ptdump.c b/arch/powerpc/mm/ptdump/ptdump.c
index 2061562..d92bb8e 100644
--- a/arch/powerpc/mm/ptdump/ptdump.c
+++ b/arch/powerpc/mm/ptdump/ptdump.c
@@ -417,12 +417,10 @@ void ptdump_check_wx(void)
 
 static int ptdump_init(void)
 {
-	struct dentry *debugfs_file;
-
 	populate_markers();
 	build_pgtable_complete_mask();
-	debugfs_file = debugfs_create_file("kernel_page_tables", 0400, NULL,
-			NULL, &ptdump_fops);
-	return debugfs_file ? 0 : -ENOMEM;
+	debugfs_create_file("kernel_page_tables", 0400, NULL, NULL,
+			    &ptdump_fops);
+	return 0;
 }
 device_initcall(ptdump_init);
diff --git a/arch/powerpc/mm/ptdump/segment_regs.c b/arch/powerpc/mm/ptdump/segment_regs.c
index 5018436..dde2fe8 100644
--- a/arch/powerpc/mm/ptdump/segment_regs.c
+++ b/arch/powerpc/mm/ptdump/segment_regs.c
@@ -55,10 +55,8 @@ static const struct file_operations sr_fops = {
 
 static int __init sr_init(void)
 {
-	struct dentry *debugfs_file;
-
-	debugfs_file = debugfs_create_file("segment_registers", 0400,
-					   powerpc_debugfs_root, NULL, &sr_fops);
-	return debugfs_file ? 0 : -ENOMEM;
+	debugfs_create_file("segment_registers", 0400, powerpc_debugfs_root,
+			    NULL, &sr_fops);
+	return 0;
 }
 device_initcall(sr_init);
diff --git a/arch/powerpc/perf/Makefile b/arch/powerpc/perf/Makefile
index c155dcb..53d614e 100644
--- a/arch/powerpc/perf/Makefile
+++ b/arch/powerpc/perf/Makefile
@@ -1,6 +1,9 @@
 # SPDX-License-Identifier: GPL-2.0
 
-obj-$(CONFIG_PERF_EVENTS)	+= callchain.o perf_regs.o
+obj-$(CONFIG_PERF_EVENTS)	+= callchain.o callchain_$(BITS).o perf_regs.o
+ifdef CONFIG_COMPAT
+obj-$(CONFIG_PERF_EVENTS)	+= callchain_32.o
+endif
 
 obj-$(CONFIG_PPC_PERF_CTRS)	+= core-book3s.o bhrb.o
 obj64-$(CONFIG_PPC_PERF_CTRS)	+= ppc970-pmu.o power5-pmu.o \
diff --git a/arch/powerpc/perf/callchain.c b/arch/powerpc/perf/callchain.c
index cbc2519..dd50510 100644
--- a/arch/powerpc/perf/callchain.c
+++ b/arch/powerpc/perf/callchain.c
@@ -15,11 +15,9 @@
 #include <asm/sigcontext.h>
 #include <asm/ucontext.h>
 #include <asm/vdso.h>
-#ifdef CONFIG_PPC64
-#include "../kernel/ppc32.h"
-#endif
 #include <asm/pte-walk.h>
 
+#include "callchain.h"
 
 /*
  * Is sp valid as the address of the next kernel stack frame after prev_sp?
@@ -102,358 +100,6 @@ perf_callchain_kernel(struct perf_callchain_entry_ctx *entry, struct pt_regs *re
 	}
 }
 
-#ifdef CONFIG_PPC64
-/*
- * On 64-bit we don't want to invoke hash_page on user addresses from
- * interrupt context, so if the access faults, we read the page tables
- * to find which page (if any) is mapped and access it directly.
- */
-static int read_user_stack_slow(void __user *ptr, void *buf, int nb)
-{
-	int ret = -EFAULT;
-	pgd_t *pgdir;
-	pte_t *ptep, pte;
-	unsigned shift;
-	unsigned long addr = (unsigned long) ptr;
-	unsigned long offset;
-	unsigned long pfn, flags;
-	void *kaddr;
-
-	pgdir = current->mm->pgd;
-	if (!pgdir)
-		return -EFAULT;
-
-	local_irq_save(flags);
-	ptep = find_current_mm_pte(pgdir, addr, NULL, &shift);
-	if (!ptep)
-		goto err_out;
-	if (!shift)
-		shift = PAGE_SHIFT;
-
-	/* align address to page boundary */
-	offset = addr & ((1UL << shift) - 1);
-
-	pte = READ_ONCE(*ptep);
-	if (!pte_present(pte) || !pte_user(pte))
-		goto err_out;
-	pfn = pte_pfn(pte);
-	if (!page_is_ram(pfn))
-		goto err_out;
-
-	/* no highmem to worry about here */
-	kaddr = pfn_to_kaddr(pfn);
-	memcpy(buf, kaddr + offset, nb);
-	ret = 0;
-err_out:
-	local_irq_restore(flags);
-	return ret;
-}
-
-static int read_user_stack_64(unsigned long __user *ptr, unsigned long *ret)
-{
-	if ((unsigned long)ptr > TASK_SIZE - sizeof(unsigned long) ||
-	    ((unsigned long)ptr & 7))
-		return -EFAULT;
-
-	if (!probe_user_read(ret, ptr, sizeof(*ret)))
-		return 0;
-
-	return read_user_stack_slow(ptr, ret, 8);
-}
-
-static int read_user_stack_32(unsigned int __user *ptr, unsigned int *ret)
-{
-	if ((unsigned long)ptr > TASK_SIZE - sizeof(unsigned int) ||
-	    ((unsigned long)ptr & 3))
-		return -EFAULT;
-
-	if (!probe_user_read(ret, ptr, sizeof(*ret)))
-		return 0;
-
-	return read_user_stack_slow(ptr, ret, 4);
-}
-
-static inline int valid_user_sp(unsigned long sp, int is_64)
-{
-	if (!sp || (sp & 7) || sp > (is_64 ? TASK_SIZE : 0x100000000UL) - 32)
-		return 0;
-	return 1;
-}
-
-/*
- * 64-bit user processes use the same stack frame for RT and non-RT signals.
- */
-struct signal_frame_64 {
-	char		dummy[__SIGNAL_FRAMESIZE];
-	struct ucontext	uc;
-	unsigned long	unused[2];
-	unsigned int	tramp[6];
-	struct siginfo	*pinfo;
-	void		*puc;
-	struct siginfo	info;
-	char		abigap[288];
-};
-
-static int is_sigreturn_64_address(unsigned long nip, unsigned long fp)
-{
-	if (nip == fp + offsetof(struct signal_frame_64, tramp))
-		return 1;
-	if (vdso64_rt_sigtramp && current->mm->context.vdso_base &&
-	    nip == current->mm->context.vdso_base + vdso64_rt_sigtramp)
-		return 1;
-	return 0;
-}
-
-/*
- * Do some sanity checking on the signal frame pointed to by sp.
- * We check the pinfo and puc pointers in the frame.
- */
-static int sane_signal_64_frame(unsigned long sp)
-{
-	struct signal_frame_64 __user *sf;
-	unsigned long pinfo, puc;
-
-	sf = (struct signal_frame_64 __user *) sp;
-	if (read_user_stack_64((unsigned long __user *) &sf->pinfo, &pinfo) ||
-	    read_user_stack_64((unsigned long __user *) &sf->puc, &puc))
-		return 0;
-	return pinfo == (unsigned long) &sf->info &&
-		puc == (unsigned long) &sf->uc;
-}
-
-static void perf_callchain_user_64(struct perf_callchain_entry_ctx *entry,
-				   struct pt_regs *regs)
-{
-	unsigned long sp, next_sp;
-	unsigned long next_ip;
-	unsigned long lr;
-	long level = 0;
-	struct signal_frame_64 __user *sigframe;
-	unsigned long __user *fp, *uregs;
-
-	next_ip = perf_instruction_pointer(regs);
-	lr = regs->link;
-	sp = regs->gpr[1];
-	perf_callchain_store(entry, next_ip);
-
-	while (entry->nr < entry->max_stack) {
-		fp = (unsigned long __user *) sp;
-		if (!valid_user_sp(sp, 1) || read_user_stack_64(fp, &next_sp))
-			return;
-		if (level > 0 && read_user_stack_64(&fp[2], &next_ip))
-			return;
-
-		/*
-		 * Note: the next_sp - sp >= signal frame size check
-		 * is true when next_sp < sp, which can happen when
-		 * transitioning from an alternate signal stack to the
-		 * normal stack.
-		 */
-		if (next_sp - sp >= sizeof(struct signal_frame_64) &&
-		    (is_sigreturn_64_address(next_ip, sp) ||
-		     (level <= 1 && is_sigreturn_64_address(lr, sp))) &&
-		    sane_signal_64_frame(sp)) {
-			/*
-			 * This looks like an signal frame
-			 */
-			sigframe = (struct signal_frame_64 __user *) sp;
-			uregs = sigframe->uc.uc_mcontext.gp_regs;
-			if (read_user_stack_64(&uregs[PT_NIP], &next_ip) ||
-			    read_user_stack_64(&uregs[PT_LNK], &lr) ||
-			    read_user_stack_64(&uregs[PT_R1], &sp))
-				return;
-			level = 0;
-			perf_callchain_store_context(entry, PERF_CONTEXT_USER);
-			perf_callchain_store(entry, next_ip);
-			continue;
-		}
-
-		if (level == 0)
-			next_ip = lr;
-		perf_callchain_store(entry, next_ip);
-		++level;
-		sp = next_sp;
-	}
-}
-
-#else  /* CONFIG_PPC64 */
-/*
- * On 32-bit we just access the address and let hash_page create a
- * HPTE if necessary, so there is no need to fall back to reading
- * the page tables.  Since this is called at interrupt level,
- * do_page_fault() won't treat a DSI as a page fault.
- */
-static int read_user_stack_32(unsigned int __user *ptr, unsigned int *ret)
-{
-	if ((unsigned long)ptr > TASK_SIZE - sizeof(unsigned int) ||
-	    ((unsigned long)ptr & 3))
-		return -EFAULT;
-
-	return probe_user_read(ret, ptr, sizeof(*ret));
-}
-
-static inline void perf_callchain_user_64(struct perf_callchain_entry_ctx *entry,
-					  struct pt_regs *regs)
-{
-}
-
-static inline int valid_user_sp(unsigned long sp, int is_64)
-{
-	if (!sp || (sp & 7) || sp > TASK_SIZE - 32)
-		return 0;
-	return 1;
-}
-
-#define __SIGNAL_FRAMESIZE32	__SIGNAL_FRAMESIZE
-#define sigcontext32		sigcontext
-#define mcontext32		mcontext
-#define ucontext32		ucontext
-#define compat_siginfo_t	struct siginfo
-
-#endif /* CONFIG_PPC64 */
-
-/*
- * Layout for non-RT signal frames
- */
-struct signal_frame_32 {
-	char			dummy[__SIGNAL_FRAMESIZE32];
-	struct sigcontext32	sctx;
-	struct mcontext32	mctx;
-	int			abigap[56];
-};
-
-/*
- * Layout for RT signal frames
- */
-struct rt_signal_frame_32 {
-	char			dummy[__SIGNAL_FRAMESIZE32 + 16];
-	compat_siginfo_t	info;
-	struct ucontext32	uc;
-	int			abigap[56];
-};
-
-static int is_sigreturn_32_address(unsigned int nip, unsigned int fp)
-{
-	if (nip == fp + offsetof(struct signal_frame_32, mctx.mc_pad))
-		return 1;
-	if (vdso32_sigtramp && current->mm->context.vdso_base &&
-	    nip == current->mm->context.vdso_base + vdso32_sigtramp)
-		return 1;
-	return 0;
-}
-
-static int is_rt_sigreturn_32_address(unsigned int nip, unsigned int fp)
-{
-	if (nip == fp + offsetof(struct rt_signal_frame_32,
-				 uc.uc_mcontext.mc_pad))
-		return 1;
-	if (vdso32_rt_sigtramp && current->mm->context.vdso_base &&
-	    nip == current->mm->context.vdso_base + vdso32_rt_sigtramp)
-		return 1;
-	return 0;
-}
-
-static int sane_signal_32_frame(unsigned int sp)
-{
-	struct signal_frame_32 __user *sf;
-	unsigned int regs;
-
-	sf = (struct signal_frame_32 __user *) (unsigned long) sp;
-	if (read_user_stack_32((unsigned int __user *) &sf->sctx.regs, &regs))
-		return 0;
-	return regs == (unsigned long) &sf->mctx;
-}
-
-static int sane_rt_signal_32_frame(unsigned int sp)
-{
-	struct rt_signal_frame_32 __user *sf;
-	unsigned int regs;
-
-	sf = (struct rt_signal_frame_32 __user *) (unsigned long) sp;
-	if (read_user_stack_32((unsigned int __user *) &sf->uc.uc_regs, &regs))
-		return 0;
-	return regs == (unsigned long) &sf->uc.uc_mcontext;
-}
-
-static unsigned int __user *signal_frame_32_regs(unsigned int sp,
-				unsigned int next_sp, unsigned int next_ip)
-{
-	struct mcontext32 __user *mctx = NULL;
-	struct signal_frame_32 __user *sf;
-	struct rt_signal_frame_32 __user *rt_sf;
-
-	/*
-	 * Note: the next_sp - sp >= signal frame size check
-	 * is true when next_sp < sp, for example, when
-	 * transitioning from an alternate signal stack to the
-	 * normal stack.
-	 */
-	if (next_sp - sp >= sizeof(struct signal_frame_32) &&
-	    is_sigreturn_32_address(next_ip, sp) &&
-	    sane_signal_32_frame(sp)) {
-		sf = (struct signal_frame_32 __user *) (unsigned long) sp;
-		mctx = &sf->mctx;
-	}
-
-	if (!mctx && next_sp - sp >= sizeof(struct rt_signal_frame_32) &&
-	    is_rt_sigreturn_32_address(next_ip, sp) &&
-	    sane_rt_signal_32_frame(sp)) {
-		rt_sf = (struct rt_signal_frame_32 __user *) (unsigned long) sp;
-		mctx = &rt_sf->uc.uc_mcontext;
-	}
-
-	if (!mctx)
-		return NULL;
-	return mctx->mc_gregs;
-}
-
-static void perf_callchain_user_32(struct perf_callchain_entry_ctx *entry,
-				   struct pt_regs *regs)
-{
-	unsigned int sp, next_sp;
-	unsigned int next_ip;
-	unsigned int lr;
-	long level = 0;
-	unsigned int __user *fp, *uregs;
-
-	next_ip = perf_instruction_pointer(regs);
-	lr = regs->link;
-	sp = regs->gpr[1];
-	perf_callchain_store(entry, next_ip);
-
-	while (entry->nr < entry->max_stack) {
-		fp = (unsigned int __user *) (unsigned long) sp;
-		if (!valid_user_sp(sp, 0) || read_user_stack_32(fp, &next_sp))
-			return;
-		if (level > 0 && read_user_stack_32(&fp[1], &next_ip))
-			return;
-
-		uregs = signal_frame_32_regs(sp, next_sp, next_ip);
-		if (!uregs && level <= 1)
-			uregs = signal_frame_32_regs(sp, next_sp, lr);
-		if (uregs) {
-			/*
-			 * This looks like an signal frame, so restart
-			 * the stack trace with the values in it.
-			 */
-			if (read_user_stack_32(&uregs[PT_NIP], &next_ip) ||
-			    read_user_stack_32(&uregs[PT_LNK], &lr) ||
-			    read_user_stack_32(&uregs[PT_R1], &sp))
-				return;
-			level = 0;
-			perf_callchain_store_context(entry, PERF_CONTEXT_USER);
-			perf_callchain_store(entry, next_ip);
-			continue;
-		}
-
-		if (level == 0)
-			next_ip = lr;
-		perf_callchain_store(entry, next_ip);
-		++level;
-		sp = next_sp;
-	}
-}
-
 void
 perf_callchain_user(struct perf_callchain_entry_ctx *entry, struct pt_regs *regs)
 {
diff --git a/arch/powerpc/perf/callchain.h b/arch/powerpc/perf/callchain.h
new file mode 100644
index 0000000..7a2cb9e
--- /dev/null
+++ b/arch/powerpc/perf/callchain.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+#ifndef _POWERPC_PERF_CALLCHAIN_H
+#define _POWERPC_PERF_CALLCHAIN_H
+
+int read_user_stack_slow(void __user *ptr, void *buf, int nb);
+void perf_callchain_user_64(struct perf_callchain_entry_ctx *entry,
+			    struct pt_regs *regs);
+void perf_callchain_user_32(struct perf_callchain_entry_ctx *entry,
+			    struct pt_regs *regs);
+
+static inline bool invalid_user_sp(unsigned long sp)
+{
+	unsigned long mask = is_32bit_task() ? 3 : 7;
+	unsigned long top = STACK_TOP - (is_32bit_task() ? 16 : 32);
+
+	return (!sp || (sp & mask) || (sp > top));
+}
+
+#endif /* _POWERPC_PERF_CALLCHAIN_H */
diff --git a/arch/powerpc/perf/callchain_32.c b/arch/powerpc/perf/callchain_32.c
new file mode 100644
index 0000000..8aa9510
--- /dev/null
+++ b/arch/powerpc/perf/callchain_32.c
@@ -0,0 +1,196 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Performance counter callchain support - powerpc architecture code
+ *
+ * Copyright © 2009 Paul Mackerras, IBM Corporation.
+ */
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/perf_event.h>
+#include <linux/percpu.h>
+#include <linux/uaccess.h>
+#include <linux/mm.h>
+#include <asm/ptrace.h>
+#include <asm/pgtable.h>
+#include <asm/sigcontext.h>
+#include <asm/ucontext.h>
+#include <asm/vdso.h>
+#include <asm/pte-walk.h>
+
+#include "callchain.h"
+
+#ifdef CONFIG_PPC64
+#include "../kernel/ppc32.h"
+#else  /* CONFIG_PPC64 */
+
+#define __SIGNAL_FRAMESIZE32	__SIGNAL_FRAMESIZE
+#define sigcontext32		sigcontext
+#define mcontext32		mcontext
+#define ucontext32		ucontext
+#define compat_siginfo_t	struct siginfo
+
+#endif /* CONFIG_PPC64 */
+
+/*
+ * On 32-bit we just access the address and let hash_page create a
+ * HPTE if necessary, so there is no need to fall back to reading
+ * the page tables.  Since this is called at interrupt level,
+ * do_page_fault() won't treat a DSI as a page fault.
+ */
+static int read_user_stack_32(unsigned int __user *ptr, unsigned int *ret)
+{
+	int rc;
+
+	if ((unsigned long)ptr > TASK_SIZE - sizeof(unsigned int) ||
+	    ((unsigned long)ptr & 3))
+		return -EFAULT;
+
+	rc = probe_user_read(ret, ptr, sizeof(*ret));
+
+	if (IS_ENABLED(CONFIG_PPC64) && rc)
+		return read_user_stack_slow(ptr, ret, 4);
+
+	return rc;
+}
+
+/*
+ * Layout for non-RT signal frames
+ */
+struct signal_frame_32 {
+	char			dummy[__SIGNAL_FRAMESIZE32];
+	struct sigcontext32	sctx;
+	struct mcontext32	mctx;
+	int			abigap[56];
+};
+
+/*
+ * Layout for RT signal frames
+ */
+struct rt_signal_frame_32 {
+	char			dummy[__SIGNAL_FRAMESIZE32 + 16];
+	compat_siginfo_t	info;
+	struct ucontext32	uc;
+	int			abigap[56];
+};
+
+static int is_sigreturn_32_address(unsigned int nip, unsigned int fp)
+{
+	if (nip == fp + offsetof(struct signal_frame_32, mctx.mc_pad))
+		return 1;
+	if (vdso32_sigtramp && current->mm->context.vdso_base &&
+	    nip == current->mm->context.vdso_base + vdso32_sigtramp)
+		return 1;
+	return 0;
+}
+
+static int is_rt_sigreturn_32_address(unsigned int nip, unsigned int fp)
+{
+	if (nip == fp + offsetof(struct rt_signal_frame_32,
+				 uc.uc_mcontext.mc_pad))
+		return 1;
+	if (vdso32_rt_sigtramp && current->mm->context.vdso_base &&
+	    nip == current->mm->context.vdso_base + vdso32_rt_sigtramp)
+		return 1;
+	return 0;
+}
+
+static int sane_signal_32_frame(unsigned int sp)
+{
+	struct signal_frame_32 __user *sf;
+	unsigned int regs;
+
+	sf = (struct signal_frame_32 __user *) (unsigned long) sp;
+	if (read_user_stack_32((unsigned int __user *) &sf->sctx.regs, &regs))
+		return 0;
+	return regs == (unsigned long) &sf->mctx;
+}
+
+static int sane_rt_signal_32_frame(unsigned int sp)
+{
+	struct rt_signal_frame_32 __user *sf;
+	unsigned int regs;
+
+	sf = (struct rt_signal_frame_32 __user *) (unsigned long) sp;
+	if (read_user_stack_32((unsigned int __user *) &sf->uc.uc_regs, &regs))
+		return 0;
+	return regs == (unsigned long) &sf->uc.uc_mcontext;
+}
+
+static unsigned int __user *signal_frame_32_regs(unsigned int sp,
+				unsigned int next_sp, unsigned int next_ip)
+{
+	struct mcontext32 __user *mctx = NULL;
+	struct signal_frame_32 __user *sf;
+	struct rt_signal_frame_32 __user *rt_sf;
+
+	/*
+	 * Note: the next_sp - sp >= signal frame size check
+	 * is true when next_sp < sp, for example, when
+	 * transitioning from an alternate signal stack to the
+	 * normal stack.
+	 */
+	if (next_sp - sp >= sizeof(struct signal_frame_32) &&
+	    is_sigreturn_32_address(next_ip, sp) &&
+	    sane_signal_32_frame(sp)) {
+		sf = (struct signal_frame_32 __user *) (unsigned long) sp;
+		mctx = &sf->mctx;
+	}
+
+	if (!mctx && next_sp - sp >= sizeof(struct rt_signal_frame_32) &&
+	    is_rt_sigreturn_32_address(next_ip, sp) &&
+	    sane_rt_signal_32_frame(sp)) {
+		rt_sf = (struct rt_signal_frame_32 __user *) (unsigned long) sp;
+		mctx = &rt_sf->uc.uc_mcontext;
+	}
+
+	if (!mctx)
+		return NULL;
+	return mctx->mc_gregs;
+}
+
+void perf_callchain_user_32(struct perf_callchain_entry_ctx *entry,
+			    struct pt_regs *regs)
+{
+	unsigned int sp, next_sp;
+	unsigned int next_ip;
+	unsigned int lr;
+	long level = 0;
+	unsigned int __user *fp, *uregs;
+
+	next_ip = perf_instruction_pointer(regs);
+	lr = regs->link;
+	sp = regs->gpr[1];
+	perf_callchain_store(entry, next_ip);
+
+	while (entry->nr < entry->max_stack) {
+		fp = (unsigned int __user *) (unsigned long) sp;
+		if (invalid_user_sp(sp) || read_user_stack_32(fp, &next_sp))
+			return;
+		if (level > 0 && read_user_stack_32(&fp[1], &next_ip))
+			return;
+
+		uregs = signal_frame_32_regs(sp, next_sp, next_ip);
+		if (!uregs && level <= 1)
+			uregs = signal_frame_32_regs(sp, next_sp, lr);
+		if (uregs) {
+			/*
+			 * This looks like an signal frame, so restart
+			 * the stack trace with the values in it.
+			 */
+			if (read_user_stack_32(&uregs[PT_NIP], &next_ip) ||
+			    read_user_stack_32(&uregs[PT_LNK], &lr) ||
+			    read_user_stack_32(&uregs[PT_R1], &sp))
+				return;
+			level = 0;
+			perf_callchain_store_context(entry, PERF_CONTEXT_USER);
+			perf_callchain_store(entry, next_ip);
+			continue;
+		}
+
+		if (level == 0)
+			next_ip = lr;
+		perf_callchain_store(entry, next_ip);
+		++level;
+		sp = next_sp;
+	}
+}
diff --git a/arch/powerpc/perf/callchain_64.c b/arch/powerpc/perf/callchain_64.c
new file mode 100644
index 0000000..df1ffd8
--- /dev/null
+++ b/arch/powerpc/perf/callchain_64.c
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Performance counter callchain support - powerpc architecture code
+ *
+ * Copyright © 2009 Paul Mackerras, IBM Corporation.
+ */
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/perf_event.h>
+#include <linux/percpu.h>
+#include <linux/uaccess.h>
+#include <linux/mm.h>
+#include <asm/ptrace.h>
+#include <asm/pgtable.h>
+#include <asm/sigcontext.h>
+#include <asm/ucontext.h>
+#include <asm/vdso.h>
+#include <asm/pte-walk.h>
+
+#include "callchain.h"
+
+/*
+ * On 64-bit we don't want to invoke hash_page on user addresses from
+ * interrupt context, so if the access faults, we read the page tables
+ * to find which page (if any) is mapped and access it directly.
+ */
+int read_user_stack_slow(void __user *ptr, void *buf, int nb)
+{
+	int ret = -EFAULT;
+	pgd_t *pgdir;
+	pte_t *ptep, pte;
+	unsigned int shift;
+	unsigned long addr = (unsigned long) ptr;
+	unsigned long offset;
+	unsigned long pfn, flags;
+	void *kaddr;
+
+	pgdir = current->mm->pgd;
+	if (!pgdir)
+		return -EFAULT;
+
+	local_irq_save(flags);
+	ptep = find_current_mm_pte(pgdir, addr, NULL, &shift);
+	if (!ptep)
+		goto err_out;
+	if (!shift)
+		shift = PAGE_SHIFT;
+
+	/* align address to page boundary */
+	offset = addr & ((1UL << shift) - 1);
+
+	pte = READ_ONCE(*ptep);
+	if (!pte_present(pte) || !pte_user(pte))
+		goto err_out;
+	pfn = pte_pfn(pte);
+	if (!page_is_ram(pfn))
+		goto err_out;
+
+	/* no highmem to worry about here */
+	kaddr = pfn_to_kaddr(pfn);
+	memcpy(buf, kaddr + offset, nb);
+	ret = 0;
+err_out:
+	local_irq_restore(flags);
+	return ret;
+}
+
+static int read_user_stack_64(unsigned long __user *ptr, unsigned long *ret)
+{
+	if ((unsigned long)ptr > TASK_SIZE - sizeof(unsigned long) ||
+	    ((unsigned long)ptr & 7))
+		return -EFAULT;
+
+	if (!probe_user_read(ret, ptr, sizeof(*ret)))
+		return 0;
+
+	return read_user_stack_slow(ptr, ret, 8);
+}
+
+/*
+ * 64-bit user processes use the same stack frame for RT and non-RT signals.
+ */
+struct signal_frame_64 {
+	char		dummy[__SIGNAL_FRAMESIZE];
+	struct ucontext	uc;
+	unsigned long	unused[2];
+	unsigned int	tramp[6];
+	struct siginfo	*pinfo;
+	void		*puc;
+	struct siginfo	info;
+	char		abigap[288];
+};
+
+static int is_sigreturn_64_address(unsigned long nip, unsigned long fp)
+{
+	if (nip == fp + offsetof(struct signal_frame_64, tramp))
+		return 1;
+	if (vdso64_rt_sigtramp && current->mm->context.vdso_base &&
+	    nip == current->mm->context.vdso_base + vdso64_rt_sigtramp)
+		return 1;
+	return 0;
+}
+
+/*
+ * Do some sanity checking on the signal frame pointed to by sp.
+ * We check the pinfo and puc pointers in the frame.
+ */
+static int sane_signal_64_frame(unsigned long sp)
+{
+	struct signal_frame_64 __user *sf;
+	unsigned long pinfo, puc;
+
+	sf = (struct signal_frame_64 __user *) sp;
+	if (read_user_stack_64((unsigned long __user *) &sf->pinfo, &pinfo) ||
+	    read_user_stack_64((unsigned long __user *) &sf->puc, &puc))
+		return 0;
+	return pinfo == (unsigned long) &sf->info &&
+		puc == (unsigned long) &sf->uc;
+}
+
+void perf_callchain_user_64(struct perf_callchain_entry_ctx *entry,
+			    struct pt_regs *regs)
+{
+	unsigned long sp, next_sp;
+	unsigned long next_ip;
+	unsigned long lr;
+	long level = 0;
+	struct signal_frame_64 __user *sigframe;
+	unsigned long __user *fp, *uregs;
+
+	next_ip = perf_instruction_pointer(regs);
+	lr = regs->link;
+	sp = regs->gpr[1];
+	perf_callchain_store(entry, next_ip);
+
+	while (entry->nr < entry->max_stack) {
+		fp = (unsigned long __user *) sp;
+		if (invalid_user_sp(sp) || read_user_stack_64(fp, &next_sp))
+			return;
+		if (level > 0 && read_user_stack_64(&fp[2], &next_ip))
+			return;
+
+		/*
+		 * Note: the next_sp - sp >= signal frame size check
+		 * is true when next_sp < sp, which can happen when
+		 * transitioning from an alternate signal stack to the
+		 * normal stack.
+		 */
+		if (next_sp - sp >= sizeof(struct signal_frame_64) &&
+		    (is_sigreturn_64_address(next_ip, sp) ||
+		     (level <= 1 && is_sigreturn_64_address(lr, sp))) &&
+		    sane_signal_64_frame(sp)) {
+			/*
+			 * This looks like an signal frame
+			 */
+			sigframe = (struct signal_frame_64 __user *) sp;
+			uregs = sigframe->uc.uc_mcontext.gp_regs;
+			if (read_user_stack_64(&uregs[PT_NIP], &next_ip) ||
+			    read_user_stack_64(&uregs[PT_LNK], &lr) ||
+			    read_user_stack_64(&uregs[PT_R1], &sp))
+				return;
+			level = 0;
+			perf_callchain_store_context(entry, PERF_CONTEXT_USER);
+			perf_callchain_store(entry, next_ip);
+			continue;
+		}
+
+		if (level == 0)
+			next_ip = lr;
+		perf_callchain_store(entry, next_ip);
+		++level;
+		sp = next_sp;
+	}
+}
diff --git a/arch/powerpc/perf/imc-pmu.c b/arch/powerpc/perf/imc-pmu.c
index cb50a9e..eb82dda 100644
--- a/arch/powerpc/perf/imc-pmu.c
+++ b/arch/powerpc/perf/imc-pmu.c
@@ -44,6 +44,16 @@ static DEFINE_PER_CPU(u64 *, trace_imc_mem);
 static struct imc_pmu_ref *trace_imc_refc;
 static int trace_imc_mem_size;
 
+/*
+ * Global data structure used to avoid races between thread,
+ * core and trace-imc
+ */
+static struct imc_pmu_ref imc_global_refc = {
+	.lock = __MUTEX_INITIALIZER(imc_global_refc.lock),
+	.id = 0,
+	.refc = 0,
+};
+
 static struct imc_pmu *imc_event_to_pmu(struct perf_event *event)
 {
 	return container_of(event->pmu, struct imc_pmu, pmu);
@@ -698,6 +708,16 @@ static int ppc_core_imc_cpu_offline(unsigned int cpu)
 			return -EINVAL;
 
 		ref->refc = 0;
+		/*
+		 * Reduce the global reference count, if this is the
+		 * last cpu in this core and core-imc event running
+		 * in this cpu.
+		 */
+		mutex_lock(&imc_global_refc.lock);
+		if (imc_global_refc.id == IMC_DOMAIN_CORE)
+			imc_global_refc.refc--;
+
+		mutex_unlock(&imc_global_refc.lock);
 	}
 	return 0;
 }
@@ -710,6 +730,23 @@ static int core_imc_pmu_cpumask_init(void)
 				 ppc_core_imc_cpu_offline);
 }
 
+static void reset_global_refc(struct perf_event *event)
+{
+		mutex_lock(&imc_global_refc.lock);
+		imc_global_refc.refc--;
+
+		/*
+		 * If no other thread is running any
+		 * event for this domain(thread/core/trace),
+		 * set the global id to zero.
+		 */
+		if (imc_global_refc.refc <= 0) {
+			imc_global_refc.refc = 0;
+			imc_global_refc.id = 0;
+		}
+		mutex_unlock(&imc_global_refc.lock);
+}
+
 static void core_imc_counters_release(struct perf_event *event)
 {
 	int rc, core_id;
@@ -759,6 +796,8 @@ static void core_imc_counters_release(struct perf_event *event)
 		ref->refc = 0;
 	}
 	mutex_unlock(&ref->lock);
+
+	reset_global_refc(event);
 }
 
 static int core_imc_event_init(struct perf_event *event)
@@ -819,6 +858,29 @@ static int core_imc_event_init(struct perf_event *event)
 	++ref->refc;
 	mutex_unlock(&ref->lock);
 
+	/*
+	 * Since the system can run either in accumulation or trace-mode
+	 * of IMC at a time, core-imc events are allowed only if no other
+	 * trace/thread imc events are enabled/monitored.
+	 *
+	 * Take the global lock, and check the refc.id
+	 * to know whether any other trace/thread imc
+	 * events are running.
+	 */
+	mutex_lock(&imc_global_refc.lock);
+	if (imc_global_refc.id == 0 || imc_global_refc.id == IMC_DOMAIN_CORE) {
+		/*
+		 * No other trace/thread imc events are running in
+		 * the system, so set the refc.id to core-imc.
+		 */
+		imc_global_refc.id = IMC_DOMAIN_CORE;
+		imc_global_refc.refc++;
+	} else {
+		mutex_unlock(&imc_global_refc.lock);
+		return -EBUSY;
+	}
+	mutex_unlock(&imc_global_refc.lock);
+
 	event->hw.event_base = (u64)pcmi->vbase + (config & IMC_EVENT_OFFSET_MASK);
 	event->destroy = core_imc_counters_release;
 	return 0;
@@ -877,7 +939,23 @@ static int ppc_thread_imc_cpu_online(unsigned int cpu)
 
 static int ppc_thread_imc_cpu_offline(unsigned int cpu)
 {
-	mtspr(SPRN_LDBAR, 0);
+	/*
+	 * Set the bit 0 of LDBAR to zero.
+	 *
+	 * If bit 0 of LDBAR is unset, it will stop posting
+	 * the counter data to memory.
+	 * For thread-imc, bit 0 of LDBAR will be set to 1 in the
+	 * event_add function. So reset this bit here, to stop the updates
+	 * to memory in the cpu_offline path.
+	 */
+	mtspr(SPRN_LDBAR, (mfspr(SPRN_LDBAR) & (~(1UL << 63))));
+
+	/* Reduce the refc if thread-imc event running on this cpu */
+	mutex_lock(&imc_global_refc.lock);
+	if (imc_global_refc.id == IMC_DOMAIN_THREAD)
+		imc_global_refc.refc--;
+	mutex_unlock(&imc_global_refc.lock);
+
 	return 0;
 }
 
@@ -916,7 +994,22 @@ static int thread_imc_event_init(struct perf_event *event)
 	if (!target)
 		return -EINVAL;
 
+	mutex_lock(&imc_global_refc.lock);
+	/*
+	 * Check if any other trace/core imc events are running in the
+	 * system, if not set the global id to thread-imc.
+	 */
+	if (imc_global_refc.id == 0 || imc_global_refc.id == IMC_DOMAIN_THREAD) {
+		imc_global_refc.id = IMC_DOMAIN_THREAD;
+		imc_global_refc.refc++;
+	} else {
+		mutex_unlock(&imc_global_refc.lock);
+		return -EBUSY;
+	}
+	mutex_unlock(&imc_global_refc.lock);
+
 	event->pmu->task_ctx_nr = perf_sw_context;
+	event->destroy = reset_global_refc;
 	return 0;
 }
 
@@ -1063,10 +1156,12 @@ static void thread_imc_event_del(struct perf_event *event, int flags)
 	int core_id;
 	struct imc_pmu_ref *ref;
 
-	mtspr(SPRN_LDBAR, 0);
-
 	core_id = smp_processor_id() / threads_per_core;
 	ref = &core_imc_refc[core_id];
+	if (!ref) {
+		pr_debug("imc: Failed to get event reference count\n");
+		return;
+	}
 
 	mutex_lock(&ref->lock);
 	ref->refc--;
@@ -1082,6 +1177,10 @@ static void thread_imc_event_del(struct perf_event *event, int flags)
 		ref->refc = 0;
 	}
 	mutex_unlock(&ref->lock);
+
+	/* Set bit 0 of LDBAR to zero, to stop posting updates to memory */
+	mtspr(SPRN_LDBAR, (mfspr(SPRN_LDBAR) & (~(1UL << 63))));
+
 	/*
 	 * Take a snapshot and calculate the delta and update
 	 * the event counter values.
@@ -1133,7 +1232,18 @@ static int ppc_trace_imc_cpu_online(unsigned int cpu)
 
 static int ppc_trace_imc_cpu_offline(unsigned int cpu)
 {
-	mtspr(SPRN_LDBAR, 0);
+	/*
+	 * No need to set bit 0 of LDBAR to zero, as
+	 * it is set to zero for imc trace-mode
+	 *
+	 * Reduce the refc if any trace-imc event running
+	 * on this cpu.
+	 */
+	mutex_lock(&imc_global_refc.lock);
+	if (imc_global_refc.id == IMC_DOMAIN_TRACE)
+		imc_global_refc.refc--;
+	mutex_unlock(&imc_global_refc.lock);
+
 	return 0;
 }
 
@@ -1226,15 +1336,14 @@ static int trace_imc_event_add(struct perf_event *event, int flags)
 	local_mem = get_trace_imc_event_base_addr();
 	ldbar_value = ((u64)local_mem & THREAD_IMC_LDBAR_MASK) | TRACE_IMC_ENABLE;
 
-	if (core_imc_refc)
-		ref = &core_imc_refc[core_id];
+	/* trace-imc reference count */
+	if (trace_imc_refc)
+		ref = &trace_imc_refc[core_id];
 	if (!ref) {
-		/* If core-imc is not enabled, use trace-imc reference count */
-		if (trace_imc_refc)
-			ref = &trace_imc_refc[core_id];
-		if (!ref)
-			return -EINVAL;
+		pr_debug("imc: Failed to get the event reference count\n");
+		return -EINVAL;
 	}
+
 	mtspr(SPRN_LDBAR, ldbar_value);
 	mutex_lock(&ref->lock);
 	if (ref->refc == 0) {
@@ -1242,13 +1351,11 @@ static int trace_imc_event_add(struct perf_event *event, int flags)
 				get_hard_smp_processor_id(smp_processor_id()))) {
 			mutex_unlock(&ref->lock);
 			pr_err("trace-imc: Unable to start the counters for core %d\n", core_id);
-			mtspr(SPRN_LDBAR, 0);
 			return -EINVAL;
 		}
 	}
 	++ref->refc;
 	mutex_unlock(&ref->lock);
-
 	return 0;
 }
 
@@ -1274,16 +1381,13 @@ static void trace_imc_event_del(struct perf_event *event, int flags)
 	int core_id = smp_processor_id() / threads_per_core;
 	struct imc_pmu_ref *ref = NULL;
 
-	if (core_imc_refc)
-		ref = &core_imc_refc[core_id];
+	if (trace_imc_refc)
+		ref = &trace_imc_refc[core_id];
 	if (!ref) {
-		/* If core-imc is not enabled, use trace-imc reference count */
-		if (trace_imc_refc)
-			ref = &trace_imc_refc[core_id];
-		if (!ref)
-			return;
+		pr_debug("imc: Failed to get event reference count\n");
+		return;
 	}
-	mtspr(SPRN_LDBAR, 0);
+
 	mutex_lock(&ref->lock);
 	ref->refc--;
 	if (ref->refc == 0) {
@@ -1297,6 +1401,7 @@ static void trace_imc_event_del(struct perf_event *event, int flags)
 		ref->refc = 0;
 	}
 	mutex_unlock(&ref->lock);
+
 	trace_imc_event_stop(event, flags);
 }
 
@@ -1314,10 +1419,30 @@ static int trace_imc_event_init(struct perf_event *event)
 	if (event->attr.sample_period == 0)
 		return -ENOENT;
 
+	/*
+	 * Take the global lock, and make sure
+	 * no other thread is running any core/thread imc
+	 * events
+	 */
+	mutex_lock(&imc_global_refc.lock);
+	if (imc_global_refc.id == 0 || imc_global_refc.id == IMC_DOMAIN_TRACE) {
+		/*
+		 * No core/thread imc events are running in the
+		 * system, so set the refc.id to trace-imc.
+		 */
+		imc_global_refc.id = IMC_DOMAIN_TRACE;
+		imc_global_refc.refc++;
+	} else {
+		mutex_unlock(&imc_global_refc.lock);
+		return -EBUSY;
+	}
+	mutex_unlock(&imc_global_refc.lock);
+
 	event->hw.idx = -1;
 	target = event->hw.target;
 
 	event->pmu->task_ctx_nr = perf_hw_context;
+	event->destroy = reset_global_refc;
 	return 0;
 }
 
@@ -1429,10 +1554,10 @@ static void cleanup_all_core_imc_memory(void)
 static void thread_imc_ldbar_disable(void *dummy)
 {
 	/*
-	 * By Zeroing LDBAR, we disable thread-imc
-	 * updates.
+	 * By setting 0th bit of LDBAR to zero, we disable thread-imc
+	 * updates to memory.
 	 */
-	mtspr(SPRN_LDBAR, 0);
+	mtspr(SPRN_LDBAR, (mfspr(SPRN_LDBAR) & (~(1UL << 63))));
 }
 
 void thread_imc_disable(void)
diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c
index 6620b64..665f18e 100644
--- a/arch/powerpc/platforms/44x/warp.c
+++ b/arch/powerpc/platforms/44x/warp.c
@@ -43,9 +43,6 @@ static int __init warp_probe(void)
 	if (!of_machine_is_compatible("pika,warp"))
 		return 0;
 
-	/* For arch_dma_alloc */
-	ISA_DMA_THRESHOLD = ~0L;
-
 	return 1;
 }
 
diff --git a/arch/powerpc/platforms/52xx/efika.c b/arch/powerpc/platforms/52xx/efika.c
index 6153886..4514a6f 100644
--- a/arch/powerpc/platforms/52xx/efika.c
+++ b/arch/powerpc/platforms/52xx/efika.c
@@ -205,7 +205,6 @@ static int __init efika_probe(void)
 	if (strcmp(model, "EFIKA5K2"))
 		return 0;
 
-	ISA_DMA_THRESHOLD = ~0L;
 	DMA_MODE_READ = 0x44;
 	DMA_MODE_WRITE = 0x48;
 
diff --git a/arch/powerpc/platforms/83xx/km83xx.c b/arch/powerpc/platforms/83xx/km83xx.c
index ada42f0..bcdc2c2 100644
--- a/arch/powerpc/platforms/83xx/km83xx.c
+++ b/arch/powerpc/platforms/83xx/km83xx.c
@@ -53,17 +53,19 @@ static void quirk_mpc8360e_qe_enet10(void)
 
 	np_par = of_find_node_by_name(NULL, "par_io");
 	if (np_par == NULL) {
-		pr_warn("%s couldn;t find par_io node\n", __func__);
+		pr_warn("%s couldn't find par_io node\n", __func__);
 		return;
 	}
 	/* Map Parallel I/O ports registers */
 	ret = of_address_to_resource(np_par, 0, &res);
 	if (ret) {
-		pr_warn("%s couldn;t map par_io registers\n", __func__);
-		return;
+		pr_warn("%s couldn't map par_io registers\n", __func__);
+		goto out;
 	}
 
 	base = ioremap(res.start, resource_size(&res));
+	if (!base)
+		goto out;
 
 	/*
 	 * set output delay adjustments to default values according
@@ -111,6 +113,7 @@ static void quirk_mpc8360e_qe_enet10(void)
 		setbits32((base + 0xac), 0x0000c000);
 	}
 	iounmap(base);
+out:
 	of_node_put(np_par);
 }
 
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
index 6b1436a..915ab67 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
@@ -218,12 +218,6 @@ static irqreturn_t mpc85xx_8259_cascade_action(int irq, void *dev_id)
 {
 	return IRQ_HANDLED;
 }
-
-static struct irqaction mpc85xxcds_8259_irqaction = {
-	.handler = mpc85xx_8259_cascade_action,
-	.flags = IRQF_SHARED | IRQF_NO_THREAD,
-	.name = "8259 cascade",
-};
 #endif /* PPC_I8259 */
 #endif /* CONFIG_PCI */
 
@@ -271,7 +265,10 @@ static int mpc85xx_cds_8259_attach(void)
 	 *  disabled when the last user of the shared IRQ line frees their
 	 *  interrupt.
 	 */
-	if ((ret = setup_irq(cascade_irq, &mpc85xxcds_8259_irqaction))) {
+	ret = request_irq(cascade_irq, mpc85xx_8259_cascade_action,
+			  IRQF_SHARED | IRQF_NO_THREAD, "8259 cascade",
+			  cascade_node);
+	if (ret) {
 		printk(KERN_ERR "Failed to setup cascade interrupt\n");
 		return ret;
 	}
diff --git a/arch/powerpc/platforms/8xx/cpm1.c b/arch/powerpc/platforms/8xx/cpm1.c
index a43ee7d..4db4ca2 100644
--- a/arch/powerpc/platforms/8xx/cpm1.c
+++ b/arch/powerpc/platforms/8xx/cpm1.c
@@ -120,12 +120,6 @@ static irqreturn_t cpm_error_interrupt(int irq, void *dev)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction cpm_error_irqaction = {
-	.handler = cpm_error_interrupt,
-	.flags = IRQF_NO_THREAD,
-	.name = "error",
-};
-
 static const struct irq_domain_ops cpm_pic_host_ops = {
 	.map = cpm_pic_host_map,
 };
@@ -187,7 +181,8 @@ unsigned int __init cpm_pic_init(void)
 	if (!eirq)
 		goto end;
 
-	if (setup_irq(eirq, &cpm_error_irqaction))
+	if (request_irq(eirq, cpm_error_interrupt, IRQF_NO_THREAD, "error",
+			NULL))
 		printk(KERN_ERR "Could not allocate CPM error IRQ!");
 
 	setbits32(&cpic_reg->cpic_cicr, CICR_IEN);
diff --git a/arch/powerpc/platforms/8xx/m8xx_setup.c b/arch/powerpc/platforms/8xx/m8xx_setup.c
index f1c805c..df4d57d 100644
--- a/arch/powerpc/platforms/8xx/m8xx_setup.c
+++ b/arch/powerpc/platforms/8xx/m8xx_setup.c
@@ -39,12 +39,6 @@ static irqreturn_t timebase_interrupt(int irq, void *dev)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction tbint_irqaction = {
-	.handler = timebase_interrupt,
-	.flags = IRQF_NO_THREAD,
-	.name = "tbint",
-};
-
 /* per-board overridable init_internal_rtc() function. */
 void __init __attribute__ ((weak))
 init_internal_rtc(void)
@@ -157,7 +151,8 @@ void __init mpc8xx_calibrate_decr(void)
 					(TBSCR_TBF | TBSCR_TBE));
 	immr_unmap(sys_tmr2);
 
-	if (setup_irq(virq, &tbint_irqaction))
+	if (request_irq(virq, timebase_interrupt, IRQF_NO_THREAD, "tbint",
+			NULL))
 		panic("Could not allocate timer IRQ!");
 }
 
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 6caedc8..0c3c190 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -397,7 +397,7 @@
 
 config PPC_KUAP_DEBUG
 	bool "Extra debugging for Kernel Userspace Access Protection"
-	depends on PPC_HAVE_KUAP && (PPC_RADIX_MMU || PPC_32)
+	depends on PPC_KUAP && (PPC_RADIX_MMU || PPC_32)
 	help
 	  Add extra debugging for Kernel Userspace Access Protection (KUAP)
 	  If you're unsure, say N.
@@ -425,6 +425,12 @@
 config PPC_HAVE_PMU_SUPPORT
 	bool
 
+config PMU_SYSFS
+	bool "Create PMU SPRs sysfs file"
+	default n
+	help
+	  This option enables sysfs file creation for PMU SPRs like MMCR* and PMC*.
+
 config PPC_PERF_CTRS
 	def_bool y
 	depends on PERF_EVENTS && PPC_HAVE_PMU_SUPPORT
diff --git a/arch/powerpc/platforms/amigaone/setup.c b/arch/powerpc/platforms/amigaone/setup.c
index ea5e45e..f5d0bf9 100644
--- a/arch/powerpc/platforms/amigaone/setup.c
+++ b/arch/powerpc/platforms/amigaone/setup.c
@@ -146,7 +146,6 @@ static int __init amigaone_probe(void)
 		 */
 		cur_cpu_spec->cpu_features &= ~CPU_FTR_NEED_COHERENT;
 
-		ISA_DMA_THRESHOLD = 0x00ffffff;
 		DMA_MODE_READ = 0x44;
 		DMA_MODE_WRITE = 0x48;
 
diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c
index 57c4e0e..ca2555b 100644
--- a/arch/powerpc/platforms/cell/axon_msi.c
+++ b/arch/powerpc/platforms/cell/axon_msi.c
@@ -480,10 +480,6 @@ void axon_msi_debug_setup(struct device_node *dn, struct axon_msic *msic)
 
 	snprintf(name, sizeof(name), "msic_%d", of_node_to_nid(dn));
 
-	if (!debugfs_create_file(name, 0600, powerpc_debugfs_root,
-				 msic, &fops_msic)) {
-		pr_devel("axon_msi: debugfs_create_file failed!\n");
-		return;
-	}
+	debugfs_create_file(name, 0600, powerpc_debugfs_root, msic, &fops_msic);
 }
 #endif /* DEBUG */
diff --git a/arch/powerpc/platforms/cell/spufs/.gitignore b/arch/powerpc/platforms/cell/spufs/.gitignore
index a09ee8d..5f3eb22 100644
--- a/arch/powerpc/platforms/cell/spufs/.gitignore
+++ b/arch/powerpc/platforms/cell/spufs/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 spu_save_dump.h
 spu_restore_dump.h
diff --git a/arch/powerpc/platforms/cell/spufs/switch.c b/arch/powerpc/platforms/cell/spufs/switch.c
index 5c3f5d0..d56b4e3 100644
--- a/arch/powerpc/platforms/cell/spufs/switch.c
+++ b/arch/powerpc/platforms/cell/spufs/switch.c
@@ -177,7 +177,7 @@ static inline void save_mfc_cntl(struct spu_state *csa, struct spu *spu)
 		POLL_WHILE_FALSE((in_be64(&priv2->mfc_control_RW) &
 				  MFC_CNTL_SUSPEND_DMA_STATUS_MASK) ==
 				 MFC_CNTL_SUSPEND_COMPLETE);
-		/* fall through */
+		fallthrough;
 	case MFC_CNTL_SUSPEND_COMPLETE:
 		if (csa)
 			csa->priv2.mfc_control_RW =
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
index fcf6f23..65a7e01 100644
--- a/arch/powerpc/platforms/chrp/setup.c
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -451,13 +451,6 @@ static void __init chrp_find_openpic(void)
 	of_node_put(np);
 }
 
-#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_XMON)
-static struct irqaction xmon_irqaction = {
-	.handler = xmon_irq,
-	.name = "XMON break",
-};
-#endif
-
 static void __init chrp_find_8259(void)
 {
 	struct device_node *np, *pic = NULL;
@@ -541,8 +534,11 @@ static void __init chrp_init_IRQ(void)
 		if (of_node_is_type(kbd->parent, "adb"))
 			break;
 	of_node_put(kbd);
-	if (kbd)
-		setup_irq(HYDRA_INT_ADB_NMI, &xmon_irqaction);
+	if (kbd) {
+		if (request_irq(HYDRA_INT_ADB_NMI, xmon_irq, 0, "XMON break",
+				NULL))
+			pr_err("Failed to register XMON break interrupt\n");
+	}
 #endif
 }
 
@@ -573,7 +569,6 @@ static int __init chrp_probe(void)
  	if (strcmp(dtype, "chrp"))
 		return 0;
 
-	ISA_DMA_THRESHOLD = ~0L;
 	DMA_MODE_READ = 0x44;
 	DMA_MODE_WRITE = 0x48;
 
diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c
index 6f019df..15b2c6e 100644
--- a/arch/powerpc/platforms/maple/setup.c
+++ b/arch/powerpc/platforms/maple/setup.c
@@ -291,23 +291,6 @@ static int __init maple_probe(void)
 	return 1;
 }
 
-define_machine(maple) {
-	.name			= "Maple",
-	.probe			= maple_probe,
-	.setup_arch		= maple_setup_arch,
-	.init_IRQ		= maple_init_IRQ,
-	.pci_irq_fixup		= maple_pci_irq_fixup,
-	.pci_get_legacy_ide_irq	= maple_pci_get_legacy_ide_irq,
-	.restart		= maple_restart,
-	.halt			= maple_halt,
-       	.get_boot_time		= maple_get_boot_time,
-       	.set_rtc_time		= maple_set_rtc_time,
-       	.get_rtc_time		= maple_get_rtc_time,
-      	.calibrate_decr		= generic_calibrate_decr,
-	.progress		= maple_progress,
-	.power_save		= power4_idle,
-};
-
 #ifdef CONFIG_EDAC
 /*
  * Register a platform device for CPC925 memory controller on
@@ -364,3 +347,20 @@ static int __init maple_cpc925_edac_setup(void)
 }
 machine_device_initcall(maple, maple_cpc925_edac_setup);
 #endif
+
+define_machine(maple) {
+	.name			= "Maple",
+	.probe			= maple_probe,
+	.setup_arch		= maple_setup_arch,
+	.init_IRQ		= maple_init_IRQ,
+	.pci_irq_fixup		= maple_pci_irq_fixup,
+	.pci_get_legacy_ide_irq	= maple_pci_get_legacy_ide_irq,
+	.restart		= maple_restart,
+	.halt			= maple_halt,
+	.get_boot_time		= maple_get_boot_time,
+	.set_rtc_time		= maple_set_rtc_time,
+	.get_rtc_time		= maple_get_rtc_time,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= maple_progress,
+	.power_save		= power4_idle,
+};
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index 2e96907..4921bcc 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -250,20 +250,6 @@ static unsigned int pmac_pic_get_irq(void)
 	return irq_linear_revmap(pmac_pic_host, irq);
 }
 
-#ifdef CONFIG_XMON
-static struct irqaction xmon_action = {
-	.handler	= xmon_irq,
-	.flags		= IRQF_NO_THREAD,
-	.name		= "NMI - XMON"
-};
-#endif
-
-static struct irqaction gatwick_cascade_action = {
-	.handler	= gatwick_action,
-	.flags		= IRQF_NO_THREAD,
-	.name		= "cascade",
-};
-
 static int pmac_pic_host_match(struct irq_domain *h, struct device_node *node,
 			       enum irq_domain_bus_token bus_token)
 {
@@ -384,12 +370,17 @@ static void __init pmac_pic_probe_oldstyle(void)
 		out_le32(&pmac_irq_hw[i]->enable, 0);
 
 	/* Hookup cascade irq */
-	if (slave && pmac_irq_cascade)
-		setup_irq(pmac_irq_cascade, &gatwick_cascade_action);
+	if (slave && pmac_irq_cascade) {
+		if (request_irq(pmac_irq_cascade, gatwick_action,
+				IRQF_NO_THREAD, "cascade", NULL))
+			pr_err("Failed to register cascade interrupt\n");
+	}
 
 	printk(KERN_INFO "irq: System has %d possible interrupts\n", max_irqs);
 #ifdef CONFIG_XMON
-	setup_irq(irq_create_mapping(NULL, 20), &xmon_action);
+	i = irq_create_mapping(NULL, 20);
+	if (request_irq(i, xmon_irq, IRQF_NO_THREAD, "NMI - XMON", NULL))
+		pr_err("Failed to register NMI-XMON interrupt\n");
 #endif
 }
 
@@ -441,7 +432,9 @@ static void __init pmac_pic_setup_mpic_nmi(struct mpic *mpic)
 		nmi_irq = irq_of_parse_and_map(pswitch, 0);
 		if (nmi_irq) {
 			mpic_irq_set_priority(nmi_irq, 9);
-			setup_irq(nmi_irq, &xmon_action);
+			if (request_irq(nmi_irq, xmon_irq, IRQF_NO_THREAD,
+					"NMI - XMON", NULL))
+				pr_err("Failed to register NMI-XMON interrupt\n");
 		}
 		of_node_put(pswitch);
 	}
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index c6d5333..95fb4fe 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -586,7 +586,6 @@ static int __init pmac_probe(void)
 
 #ifdef CONFIG_PPC32
 	/* isa_io_base gets set in pmac_pci_init */
-	ISA_DMA_THRESHOLD = ~0L;
 	DMA_MODE_READ = 1;
 	DMA_MODE_WRITE = 2;
 #endif /* CONFIG_PPC32 */
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index f95fbde..be2ab5b1 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -399,21 +399,19 @@ static int __init smp_psurge_kick_cpu(int nr)
 	return 0;
 }
 
-static struct irqaction psurge_irqaction = {
-	.handler = psurge_ipi_intr,
-	.flags = IRQF_PERCPU | IRQF_NO_THREAD,
-	.name = "primary IPI",
-};
-
 static void __init smp_psurge_setup_cpu(int cpu_nr)
 {
+	unsigned long flags = IRQF_PERCPU | IRQF_NO_THREAD;
+	int irq;
+
 	if (cpu_nr != 0 || !psurge_start)
 		return;
 
 	/* reset the entry point so if we get another intr we won't
 	 * try to startup again */
 	out_be32(psurge_start, 0x100);
-	if (setup_irq(irq_create_mapping(NULL, 30), &psurge_irqaction))
+	irq = irq_create_mapping(NULL, 30);
+	if (request_irq(irq, psurge_ipi_intr, flags, "primary IPI", NULL))
 		printk(KERN_ERR "Couldn't get primary IPI interrupt");
 }
 
@@ -660,13 +658,13 @@ static void smp_core99_gpio_tb_freeze(int freeze)
 
 #endif /* !CONFIG_PPC64 */
 
-/* L2 and L3 cache settings to pass from CPU0 to CPU1 on G4 cpus */
-volatile static long int core99_l2_cache;
-volatile static long int core99_l3_cache;
-
 static void core99_init_caches(int cpu)
 {
 #ifndef CONFIG_PPC64
+	/* L2 and L3 cache settings to pass from CPU0 to CPU1 on G4 cpus */
+	static long int core99_l2_cache;
+	static long int core99_l3_cache;
+
 	if (!cpu_has_feature(CPU_FTR_L2CR))
 		return;
 
diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index 6f300ab..79409e0 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -40,15 +40,8 @@ static int eeh_event_irq = -EINVAL;
 
 void pnv_pcibios_bus_add_device(struct pci_dev *pdev)
 {
-	struct pci_dn *pdn = pci_get_pdn(pdev);
-
-	if (!pdn || eeh_has_flag(EEH_FORCE_DISABLED))
-		return;
-
 	dev_dbg(&pdev->dev, "EEH: Setting up device\n");
-	eeh_add_device_early(pdn);
-	eeh_add_device_late(pdev);
-	eeh_sysfs_add_device(pdev);
+	eeh_probe_device(pdev);
 }
 
 static int pnv_eeh_init(void)
@@ -347,23 +340,13 @@ static int pnv_eeh_find_ecap(struct pci_dn *pdn, int cap)
 
 /**
  * pnv_eeh_probe - Do probe on PCI device
- * @pdn: PCI device node
- * @data: unused
+ * @pdev: pci_dev to probe
  *
- * When EEH module is installed during system boot, all PCI devices
- * are checked one by one to see if it supports EEH. The function
- * is introduced for the purpose. By default, EEH has been enabled
- * on all PCI devices. That's to say, we only need do necessary
- * initialization on the corresponding eeh device and create PE
- * accordingly.
- *
- * It's notable that's unsafe to retrieve the EEH device through
- * the corresponding PCI device. During the PCI device hotplug, which
- * was possiblly triggered by EEH core, the binding between EEH device
- * and the PCI device isn't built yet.
+ * Create, or find the existing, eeh_dev for this pci_dev.
  */
-static void *pnv_eeh_probe(struct pci_dn *pdn, void *data)
+static struct eeh_dev *pnv_eeh_probe(struct pci_dev *pdev)
 {
+	struct pci_dn *pdn = pci_get_pdn(pdev);
 	struct pci_controller *hose = pdn->phb;
 	struct pnv_phb *phb = hose->private_data;
 	struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
@@ -380,6 +363,14 @@ static void *pnv_eeh_probe(struct pci_dn *pdn, void *data)
 	if (!edev || edev->pe)
 		return NULL;
 
+	/* already configured? */
+	if (edev->pdev) {
+		pr_debug("%s: found existing edev for %04x:%02x:%02x.%01x\n",
+			__func__, hose->global_number, config_addr >> 8,
+			PCI_SLOT(config_addr), PCI_FUNC(config_addr));
+		return edev;
+	}
+
 	/* Skip for PCI-ISA bridge */
 	if ((pdn->class_code >> 8) == PCI_CLASS_BRIDGE_ISA)
 		return NULL;
@@ -471,7 +462,7 @@ static void *pnv_eeh_probe(struct pci_dn *pdn, void *data)
 
 	eeh_edev_dbg(edev, "EEH enabled on device\n");
 
-	return NULL;
+	return edev;
 }
 
 /**
diff --git a/arch/powerpc/platforms/powernv/memtrace.c b/arch/powerpc/platforms/powernv/memtrace.c
index eb2e75d..13b369d 100644
--- a/arch/powerpc/platforms/powernv/memtrace.c
+++ b/arch/powerpc/platforms/powernv/memtrace.c
@@ -187,11 +187,6 @@ static int memtrace_init_debugfs(void)
 
 		snprintf(ent->name, 16, "%08x", ent->nid);
 		dir = debugfs_create_dir(ent->name, memtrace_debugfs_dir);
-		if (!dir) {
-			pr_err("Failed to create debugfs directory for node %d\n",
-				ent->nid);
-			return -1;
-		}
 
 		ent->dir = dir;
 		debugfs_create_file("trace", 0400, dir, ent, &memtrace_fops);
@@ -236,16 +231,10 @@ static int memtrace_online(void)
 			continue;
 		}
 
-		/*
-		 * If kernel isn't compiled with the auto online option
-		 * we need to online the memory ourselves.
-		 */
-		if (!memhp_auto_online) {
-			lock_device_hotplug();
-			walk_memory_blocks(ent->start, ent->size, NULL,
-					   online_mem_block);
-			unlock_device_hotplug();
-		}
+		lock_device_hotplug();
+		walk_memory_blocks(ent->start, ent->size, NULL,
+				   online_mem_block);
+		unlock_device_hotplug();
 
 		/*
 		 * Memory was added successfully so clean up references to it
@@ -314,8 +303,6 @@ static int memtrace_init(void)
 {
 	memtrace_debugfs_dir = debugfs_create_dir("memtrace",
 						  powerpc_debugfs_root);
-	if (!memtrace_debugfs_dir)
-		return -1;
 
 	debugfs_create_file("enable", 0600, memtrace_debugfs_dir,
 			    NULL, &memtrace_init_fops);
diff --git a/arch/powerpc/platforms/powernv/opal-core.c b/arch/powerpc/platforms/powernv/opal-core.c
index ed895d8..6dba3b6 100644
--- a/arch/powerpc/platforms/powernv/opal-core.c
+++ b/arch/powerpc/platforms/powernv/opal-core.c
@@ -71,6 +71,7 @@ static LIST_HEAD(opalcore_list);
 static struct opalcore_config *oc_conf;
 static const struct opal_mpipl_fadump *opalc_metadata;
 static const struct opal_mpipl_fadump *opalc_cpu_metadata;
+struct kobject *mpipl_kobj;
 
 /*
  * Set crashing CPU's signal to SIGUSR1. if the kernel is triggered
@@ -428,7 +429,7 @@ static void opalcore_cleanup(void)
 		return;
 
 	/* Remove OPAL core sysfs file */
-	sysfs_remove_bin_file(opal_kobj, &opal_core_attr);
+	sysfs_remove_bin_file(mpipl_kobj, &opal_core_attr);
 	oc_conf->ptload_phdr = NULL;
 	oc_conf->ptload_cnt = 0;
 
@@ -563,9 +564,9 @@ static void __init opalcore_config_init(void)
 	of_node_put(np);
 }
 
-static ssize_t fadump_release_opalcore_store(struct kobject *kobj,
-					     struct kobj_attribute *attr,
-					     const char *buf, size_t count)
+static ssize_t release_core_store(struct kobject *kobj,
+				  struct kobj_attribute *attr,
+				  const char *buf, size_t count)
 {
 	int input = -1;
 
@@ -589,9 +590,23 @@ static ssize_t fadump_release_opalcore_store(struct kobject *kobj,
 	return count;
 }
 
-static struct kobj_attribute opalcore_rel_attr = __ATTR(fadump_release_opalcore,
-						0200, NULL,
-						fadump_release_opalcore_store);
+static struct kobj_attribute opalcore_rel_attr = __ATTR_WO(release_core);
+
+static struct attribute *mpipl_attr[] = {
+	&opalcore_rel_attr.attr,
+	NULL,
+};
+
+static struct bin_attribute *mpipl_bin_attr[] = {
+	&opal_core_attr,
+	NULL,
+
+};
+
+static struct attribute_group mpipl_group = {
+	.attrs = mpipl_attr,
+	.bin_attrs =  mpipl_bin_attr,
+};
 
 static int __init opalcore_init(void)
 {
@@ -609,7 +624,7 @@ static int __init opalcore_init(void)
 	 * then capture the dump.
 	 */
 	if (!(is_opalcore_usable())) {
-		pr_err("Failed to export /sys/firmware/opal/core\n");
+		pr_err("Failed to export /sys/firmware/opal/mpipl/core\n");
 		opalcore_cleanup();
 		return rc;
 	}
@@ -617,18 +632,28 @@ static int __init opalcore_init(void)
 	/* Set OPAL core file size */
 	opal_core_attr.size = oc_conf->opalcore_size;
 
+	mpipl_kobj = kobject_create_and_add("mpipl", opal_kobj);
+	if (!mpipl_kobj) {
+		pr_err("unable to create mpipl kobject\n");
+		return -ENOMEM;
+	}
+
 	/* Export OPAL core sysfs file */
-	rc = sysfs_create_bin_file(opal_kobj, &opal_core_attr);
-	if (rc != 0) {
-		pr_err("Failed to export /sys/firmware/opal/core\n");
+	rc = sysfs_create_group(mpipl_kobj, &mpipl_group);
+	if (rc) {
+		pr_err("mpipl sysfs group creation failed (%d)", rc);
 		opalcore_cleanup();
 		return rc;
 	}
-
-	rc = sysfs_create_file(kernel_kobj, &opalcore_rel_attr.attr);
+	/* The /sys/firmware/opal/core is moved to /sys/firmware/opal/mpipl/
+	 * directory, need to create symlink at old location to maintain
+	 * backward compatibility.
+	 */
+	rc = compat_only_sysfs_link_entry_to_kobj(opal_kobj, mpipl_kobj,
+						  "core", NULL);
 	if (rc) {
-		pr_warn("unable to create sysfs file fadump_release_opalcore (%d)\n",
-			rc);
+		pr_err("unable to create core symlink (%d)\n", rc);
+		return rc;
 	}
 
 	return 0;
diff --git a/arch/powerpc/platforms/powernv/opal-imc.c b/arch/powerpc/platforms/powernv/opal-imc.c
index 000b350..7824cc3 100644
--- a/arch/powerpc/platforms/powernv/opal-imc.c
+++ b/arch/powerpc/platforms/powernv/opal-imc.c
@@ -35,11 +35,10 @@ static int imc_mem_set(void *data, u64 val)
 }
 DEFINE_DEBUGFS_ATTRIBUTE(fops_imc_x64, imc_mem_get, imc_mem_set, "0x%016llx\n");
 
-static struct dentry *imc_debugfs_create_x64(const char *name, umode_t mode,
-					     struct dentry *parent, u64  *value)
+static void imc_debugfs_create_x64(const char *name, umode_t mode,
+				   struct dentry *parent, u64  *value)
 {
-	return debugfs_create_file_unsafe(name, mode, parent,
-					  value, &fops_imc_x64);
+	debugfs_create_file_unsafe(name, mode, parent, value, &fops_imc_x64);
 }
 
 /*
@@ -59,9 +58,6 @@ static void export_imc_mode_and_cmd(struct device_node *node,
 
 	imc_debugfs_parent = debugfs_create_dir("imc", powerpc_debugfs_root);
 
-	if (!imc_debugfs_parent)
-		return;
-
 	if (of_property_read_u32(node, "cb_offset", &cb_offset))
 		cb_offset = IMC_CNTL_BLK_OFFSET;
 
@@ -69,21 +65,15 @@ static void export_imc_mode_and_cmd(struct device_node *node,
 		loc = (u64)(ptr->vbase) + cb_offset;
 		imc_mode_addr = (u64 *)(loc + IMC_CNTL_BLK_MODE_OFFSET);
 		sprintf(mode, "imc_mode_%d", (u32)(ptr->id));
-		if (!imc_debugfs_create_x64(mode, 0600, imc_debugfs_parent,
-					    imc_mode_addr))
-			goto err;
+		imc_debugfs_create_x64(mode, 0600, imc_debugfs_parent,
+				       imc_mode_addr);
 
 		imc_cmd_addr = (u64 *)(loc + IMC_CNTL_BLK_CMD_OFFSET);
 		sprintf(cmd, "imc_cmd_%d", (u32)(ptr->id));
-		if (!imc_debugfs_create_x64(cmd, 0600, imc_debugfs_parent,
-					    imc_cmd_addr))
-			goto err;
+		imc_debugfs_create_x64(cmd, 0600, imc_debugfs_parent,
+				       imc_cmd_addr);
 		ptr++;
 	}
-	return;
-
-err:
-	debugfs_remove_recursive(imc_debugfs_parent);
 }
 
 /*
@@ -278,14 +268,7 @@ static int opal_imc_counters_probe(struct platform_device *pdev)
 			domain = IMC_DOMAIN_THREAD;
 			break;
 		case IMC_TYPE_TRACE:
-			/*
-			 * FIXME. Using trace_imc events to monitor application
-			 * or KVM thread performance can cause a checkstop
-			 * (system crash).
-			 * Disable it for now.
-			 */
-			pr_info_once("IMC: disabling trace_imc PMU\n");
-			domain = -1;
+			domain = IMC_DOMAIN_TRACE;
 			break;
 		default:
 			pr_warn("IMC Unknown Device type \n");
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 22c22cd..57d3a6a 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -3174,11 +3174,6 @@ static void pnv_pci_ioda_create_dbgfs(void)
 
 		sprintf(name, "PCI%04x", hose->global_number);
 		phb->dbgfs = debugfs_create_dir(name, powerpc_debugfs_root);
-		if (!phb->dbgfs) {
-			pr_warn("%s: Error on creating debugfs on PHB#%x\n",
-				__func__, hose->global_number);
-			continue;
-		}
 
 		debugfs_create_file_unsafe("dump_diag_regs", 0200, phb->dbgfs,
 					   phb, &pnv_pci_diag_data_fops);
diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c
index 11fdae8..3bc188d 100644
--- a/arch/powerpc/platforms/powernv/setup.c
+++ b/arch/powerpc/platforms/powernv/setup.c
@@ -229,7 +229,7 @@ static void  __noreturn pnv_restart(char *cmd)
 	pnv_prepare_going_down();
 
 	do {
-		if (!cmd)
+		if (!cmd || !strlen(cmd))
 			rc = opal_cec_reboot();
 		else if (strcmp(cmd, "full") == 0)
 			rc = opal_cec_reboot2(OPAL_REBOOT_FULL_IPL, NULL);
@@ -237,6 +237,8 @@ static void  __noreturn pnv_restart(char *cmd)
 			rc = opal_cec_reboot2(OPAL_REBOOT_MPIPL, NULL);
 		else if (strcmp(cmd, "error") == 0)
 			rc = opal_cec_reboot2(OPAL_REBOOT_PLATFORM_ERROR, NULL);
+		else if (strcmp(cmd, "fast") == 0)
+			rc = opal_cec_reboot2(OPAL_REBOOT_FAST, NULL);
 		else
 			rc = OPAL_UNSUPPORTED;
 
diff --git a/arch/powerpc/platforms/powernv/vas-debug.c b/arch/powerpc/platforms/powernv/vas-debug.c
index 09e63df..44035a3 100644
--- a/arch/powerpc/platforms/powernv/vas-debug.c
+++ b/arch/powerpc/platforms/powernv/vas-debug.c
@@ -115,7 +115,7 @@ void vas_window_free_dbgdir(struct vas_window *window)
 
 void vas_window_init_dbgdir(struct vas_window *window)
 {
-	struct dentry *f, *d;
+	struct dentry *d;
 
 	if (!window->vinst->dbgdir)
 		return;
@@ -127,28 +127,10 @@ void vas_window_init_dbgdir(struct vas_window *window)
 	snprintf(window->dbgname, 16, "w%d", window->winid);
 
 	d = debugfs_create_dir(window->dbgname, window->vinst->dbgdir);
-	if (IS_ERR(d))
-		goto free_name;
-
 	window->dbgdir = d;
 
-	f = debugfs_create_file("info", 0444, d, window, &info_fops);
-	if (IS_ERR(f))
-		goto remove_dir;
-
-	f = debugfs_create_file("hvwc", 0444, d, window, &hvwc_fops);
-	if (IS_ERR(f))
-		goto remove_dir;
-
-	return;
-
-remove_dir:
-	debugfs_remove_recursive(window->dbgdir);
-	window->dbgdir = NULL;
-
-free_name:
-	kfree(window->dbgname);
-	window->dbgname = NULL;
+	debugfs_create_file("info", 0444, d, window, &info_fops);
+	debugfs_create_file("hvwc", 0444, d, window, &hvwc_fops);
 }
 
 void vas_instance_init_dbgdir(struct vas_instance *vinst)
@@ -156,8 +138,6 @@ void vas_instance_init_dbgdir(struct vas_instance *vinst)
 	struct dentry *d;
 
 	vas_init_dbgdir();
-	if (!vas_debugfs)
-		return;
 
 	vinst->dbgname = kzalloc(16, GFP_KERNEL);
 	if (!vinst->dbgname)
@@ -166,16 +146,7 @@ void vas_instance_init_dbgdir(struct vas_instance *vinst)
 	snprintf(vinst->dbgname, 16, "v%d", vinst->vas_id);
 
 	d = debugfs_create_dir(vinst->dbgname, vas_debugfs);
-	if (IS_ERR(d))
-		goto free_name;
-
 	vinst->dbgdir = d;
-	return;
-
-free_name:
-	kfree(vinst->dbgname);
-	vinst->dbgname = NULL;
-	vinst->dbgdir = NULL;
 }
 
 /*
@@ -191,6 +162,4 @@ void vas_init_dbgdir(void)
 
 	first_time = false;
 	vas_debugfs = debugfs_create_dir("vas", NULL);
-	if (IS_ERR(vas_debugfs))
-		vas_debugfs = NULL;
 }
diff --git a/arch/powerpc/platforms/ps3/os-area.c b/arch/powerpc/platforms/ps3/os-area.c
index cbddd63..e853037 100644
--- a/arch/powerpc/platforms/ps3/os-area.c
+++ b/arch/powerpc/platforms/ps3/os-area.c
@@ -613,10 +613,8 @@ static int update_flash_db(void)
 	/* Read in header and db from flash. */
 
 	header = kmalloc(buf_len, GFP_KERNEL);
-	if (!header) {
-		pr_debug("%s: kmalloc failed\n", __func__);
+	if (!header)
 		return -ENOMEM;
-	}
 
 	count = os_area_flash_read(header, buf_len, 0);
 	if (count < 0) {
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index a3c74a5..c8a2b0b 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -29,6 +29,4 @@
 obj-$(CONFIG_PPC_SVM)		+= svm.o
 obj-$(CONFIG_FA_DUMP)		+= rtas-fadump.o
 
-ifdef CONFIG_PPC_PSERIES
 obj-$(CONFIG_SUSPEND)		+= suspend.o
-endif
diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
index 893ba3f..8453428 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -67,8 +67,7 @@ void pseries_pcibios_bus_add_device(struct pci_dev *pdev)
 		pdn->pe_number  =  physfn_pdn->pe_num_map[pdn->vf_index];
 	}
 #endif
-	eeh_add_device_early(pdn);
-	eeh_add_device_late(pdev);
+	pseries_eeh_init_edev(pdn);
 #ifdef CONFIG_PCI_IOV
 	if (pdev->is_virtfn) {
 		struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
@@ -78,7 +77,7 @@ void pseries_pcibios_bus_add_device(struct pci_dev *pdev)
 		eeh_add_to_parent_pe(edev);   /* Add as VF PE type */
 	}
 #endif
-	eeh_sysfs_add_device(pdev);
+	eeh_probe_device(pdev);
 }
 
 /*
@@ -222,15 +221,16 @@ static int pseries_eeh_find_ecap(struct pci_dn *pdn, int cap)
 }
 
 /**
- * pseries_eeh_probe - EEH probe on the given device
- * @pdn: PCI device node
- * @data: Unused
+ * pseries_eeh_init_edev - initialise the eeh_dev and eeh_pe for a pci_dn
  *
- * When EEH module is installed during system boot, all PCI devices
- * are checked one by one to see if it supports EEH. The function
- * is introduced for the purpose.
+ * @pdn: PCI device node
+ *
+ * When we discover a new PCI device via the device-tree we create a
+ * corresponding pci_dn and we allocate, but don't initialise, an eeh_dev.
+ * This function takes care of the initialisation and inserts the eeh_dev
+ * into the correct eeh_pe. If no eeh_pe exists we'll allocate one.
  */
-static void *pseries_eeh_probe(struct pci_dn *pdn, void *data)
+void pseries_eeh_init_edev(struct pci_dn *pdn)
 {
 	struct eeh_dev *edev;
 	struct eeh_pe pe;
@@ -238,18 +238,35 @@ static void *pseries_eeh_probe(struct pci_dn *pdn, void *data)
 	int enable = 0;
 	int ret;
 
-	/* Retrieve OF node and eeh device */
+	if (WARN_ON_ONCE(!eeh_has_flag(EEH_PROBE_MODE_DEVTREE)))
+		return;
+
+	/*
+	 * Find the eeh_dev for this pdn. The storage for the eeh_dev was
+	 * allocated at the same time as the pci_dn.
+	 *
+	 * XXX: We should probably re-visit that.
+	 */
 	edev = pdn_to_eeh_dev(pdn);
-	if (!edev || edev->pe)
-		return NULL;
+	if (!edev)
+		return;
+
+	/*
+	 * If ->pe is set then we've already probed this device. We hit
+	 * this path when a pci_dev is removed and rescanned while recovering
+	 * a PE (i.e. for devices where the driver doesn't support error
+	 * recovery).
+	 */
+	if (edev->pe)
+		return;
 
 	/* Check class/vendor/device IDs */
 	if (!pdn->vendor_id || !pdn->device_id || !pdn->class_code)
-		return NULL;
+		return;
 
 	/* Skip for PCI-ISA bridge */
         if ((pdn->class_code >> 8) == PCI_CLASS_BRIDGE_ISA)
-		return NULL;
+		return;
 
 	eeh_edev_dbg(edev, "Probing device\n");
 
@@ -316,10 +333,50 @@ static void *pseries_eeh_probe(struct pci_dn *pdn, void *data)
 
 	/* Save memory bars */
 	eeh_save_bars(edev);
-
-	return NULL;
 }
 
+static struct eeh_dev *pseries_eeh_probe(struct pci_dev *pdev)
+{
+	struct eeh_dev *edev;
+	struct pci_dn *pdn;
+
+	pdn = pci_get_pdn_by_devfn(pdev->bus, pdev->devfn);
+	if (!pdn)
+		return NULL;
+
+	/*
+	 * If the system supports EEH on this device then the eeh_dev was
+	 * configured and inserted into a PE in pseries_eeh_init_edev()
+	 */
+	edev = pdn_to_eeh_dev(pdn);
+	if (!edev || !edev->pe)
+		return NULL;
+
+	return edev;
+}
+
+/**
+ * pseries_eeh_init_edev_recursive - Enable EEH for the indicated device
+ * @pdn: PCI device node
+ *
+ * This routine must be used to perform EEH initialization for the
+ * indicated PCI device that was added after system boot (e.g.
+ * hotplug, dlpar).
+ */
+void pseries_eeh_init_edev_recursive(struct pci_dn *pdn)
+{
+	struct pci_dn *n;
+
+	if (!pdn)
+		return;
+
+	list_for_each_entry(n, &pdn->child_list, list)
+		pseries_eeh_init_edev_recursive(n);
+
+	pseries_eeh_init_edev(pdn);
+}
+EXPORT_SYMBOL_GPL(pseries_eeh_init_edev_recursive);
+
 /**
  * pseries_eeh_set_option - Initialize EEH or MMIO/DMA reenable
  * @pe: EEH PE
diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c
index f3ed1ba..b2cde17 100644
--- a/arch/powerpc/platforms/pseries/hotplug-memory.c
+++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
@@ -223,7 +223,7 @@ static int get_lmb_range(u32 drc_index, int n_lmbs,
 			 struct drmem_lmb **end_lmb)
 {
 	struct drmem_lmb *lmb, *start, *end;
-	struct drmem_lmb *last_lmb;
+	struct drmem_lmb *limit;
 
 	start = NULL;
 	for_each_drmem_lmb(lmb) {
@@ -236,10 +236,10 @@ static int get_lmb_range(u32 drc_index, int n_lmbs,
 	if (!start)
 		return -EINVAL;
 
-	end = &start[n_lmbs - 1];
+	end = &start[n_lmbs];
 
-	last_lmb = &drmem_info->lmbs[drmem_info->n_lmbs - 1];
-	if (end > last_lmb)
+	limit = &drmem_info->lmbs[drmem_info->n_lmbs];
+	if (end > limit)
 		return -EINVAL;
 
 	*start_lmb = start;
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 2e0a8ea..6d47b4a 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -945,6 +945,15 @@ static phys_addr_t ddw_memory_hotplug_max(void)
 	phys_addr_t max_addr = memory_hotplug_max();
 	struct device_node *memory;
 
+	/*
+	 * The "ibm,pmemory" can appear anywhere in the address space.
+	 * Assuming it is still backed by page structs, set the upper limit
+	 * for the huge DMA window as MAX_PHYSMEM_BITS.
+	 */
+	if (of_find_node_by_type(NULL, "ibm,pmemory"))
+		return (sizeof(phys_addr_t) * 8 <= MAX_PHYSMEM_BITS) ?
+			(phys_addr_t) -1 : (1ULL << MAX_PHYSMEM_BITS);
+
 	for_each_node_by_type(memory, "memory") {
 		unsigned long start, size;
 		int n_mem_addr_cells, n_mem_size_cells, len;
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index 3c3da25..e4ed531 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -636,8 +636,16 @@ static const struct proc_ops vcpudispatch_stats_freq_proc_ops = {
 
 static int __init vcpudispatch_stats_procfs_init(void)
 {
-	if (!lppaca_shared_proc(get_lppaca()))
+	/*
+	 * Avoid smp_processor_id while preemptible. All CPUs should have
+	 * the same value for lppaca_shared_proc.
+	 */
+	preempt_disable();
+	if (!lppaca_shared_proc(get_lppaca())) {
+		preempt_enable();
 		return 0;
+	}
+	preempt_enable();
 
 	if (!proc_create("powerpc/vcpudispatch_stats", 0600, NULL,
 					&vcpudispatch_stats_proc_ops))
diff --git a/arch/powerpc/platforms/pseries/of_helpers.c b/arch/powerpc/platforms/pseries/of_helpers.c
index 66dfd82..23241c7 100644
--- a/arch/powerpc/platforms/pseries/of_helpers.c
+++ b/arch/powerpc/platforms/pseries/of_helpers.c
@@ -88,7 +88,7 @@ int of_read_drc_info_cell(struct property **prop, const __be32 **curval,
 		return -EINVAL;
 
 	/* Should now know end of current entry */
-	(*curval) = (void *)p2;
+	(*curval) = (void *)(++p2);
 	data->last_drc_index = data->drc_index_start +
 		((data->num_sequential_elems - 1) * data->sequential_inc);
 
diff --git a/arch/powerpc/platforms/pseries/papr_scm.c b/arch/powerpc/platforms/pseries/papr_scm.c
index 0b4467e..f355924 100644
--- a/arch/powerpc/platforms/pseries/papr_scm.c
+++ b/arch/powerpc/platforms/pseries/papr_scm.c
@@ -246,8 +246,9 @@ static int papr_scm_meta_set(struct papr_scm_priv *p,
 	return 0;
 }
 
-int papr_scm_ndctl(struct nvdimm_bus_descriptor *nd_desc, struct nvdimm *nvdimm,
-		unsigned int cmd, void *buf, unsigned int buf_len, int *cmd_rc)
+static int papr_scm_ndctl(struct nvdimm_bus_descriptor *nd_desc,
+			  struct nvdimm *nvdimm, unsigned int cmd, void *buf,
+			  unsigned int buf_len, int *cmd_rc)
 {
 	struct nd_cmd_get_config_size *get_size_hdr;
 	struct papr_scm_priv *p;
@@ -285,25 +286,6 @@ int papr_scm_ndctl(struct nvdimm_bus_descriptor *nd_desc, struct nvdimm *nvdimm,
 	return 0;
 }
 
-static inline int papr_scm_node(int node)
-{
-	int min_dist = INT_MAX, dist;
-	int nid, min_node;
-
-	if ((node == NUMA_NO_NODE) || node_online(node))
-		return node;
-
-	min_node = first_online_node;
-	for_each_online_node(nid) {
-		dist = node_distance(node, nid);
-		if (dist < min_dist) {
-			min_dist = dist;
-			min_node = nid;
-		}
-	}
-	return min_node;
-}
-
 static int papr_scm_nvdimm_init(struct papr_scm_priv *p)
 {
 	struct device *dev = &p->pdev->dev;
@@ -328,7 +310,7 @@ static int papr_scm_nvdimm_init(struct papr_scm_priv *p)
 	}
 
 	dimm_flags = 0;
-	set_bit(NDD_ALIASING, &dimm_flags);
+	set_bit(NDD_LABELING, &dimm_flags);
 
 	p->nvdimm = nvdimm_create(p->bus, p, NULL, dimm_flags,
 				  PAPR_SCM_DIMM_CMD_MASK, 0, NULL);
@@ -349,7 +331,7 @@ static int papr_scm_nvdimm_init(struct papr_scm_priv *p)
 
 	memset(&ndr_desc, 0, sizeof(ndr_desc));
 	target_nid = dev_to_node(&p->pdev->dev);
-	online_nid = papr_scm_node(target_nid);
+	online_nid = numa_map_to_online_node(target_nid);
 	ndr_desc.numa_node = online_nid;
 	ndr_desc.target_node = target_nid;
 	ndr_desc.res = &p->res;
@@ -361,8 +343,10 @@ static int papr_scm_nvdimm_init(struct papr_scm_priv *p)
 
 	if (p->is_volatile)
 		p->region = nvdimm_volatile_region_create(p->bus, &ndr_desc);
-	else
+	else {
+		set_bit(ND_REGION_PERSIST_MEMCTRL, &ndr_desc.flags);
 		p->region = nvdimm_pmem_region_create(p->bus, &ndr_desc);
+	}
 	if (!p->region) {
 		dev_err(dev, "Error registering region %pR from %pOF\n",
 				ndr_desc.res, p->dn);
diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c
index 361986e..b3a38f5 100644
--- a/arch/powerpc/platforms/pseries/pci_dlpar.c
+++ b/arch/powerpc/platforms/pseries/pci_dlpar.c
@@ -37,7 +37,7 @@ struct pci_controller *init_phb_dynamic(struct device_node *dn)
 	eeh_dev_phb_init_dynamic(phb);
 
 	if (dn->child)
-		eeh_add_device_tree_early(PCI_DN(dn));
+		pseries_eeh_init_edev_recursive(PCI_DN(dn));
 
 	pcibios_scan_phb(phb);
 	pcibios_finish_adding_to_bus(phb->bus);
diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c
index 1d7f973..1d1da63 100644
--- a/arch/powerpc/platforms/pseries/ras.c
+++ b/arch/powerpc/platforms/pseries/ras.c
@@ -558,6 +558,9 @@ static int mce_handle_error(struct pt_regs *regs, struct rtas_error_log *errp)
 	switch (mce_log->error_type) {
 	case MC_ERROR_TYPE_UE:
 		mce_err.error_type = MCE_ERROR_TYPE_UE;
+		mce_common_process_ue(regs, &mce_err);
+		if (mce_err.ignore_event)
+			disposition = RTAS_DISP_FULLY_RECOVERED;
 		switch (err_sub_type) {
 		case MC_ERROR_UE_IFETCH:
 			mce_err.u.ue_error_type = MCE_UE_ERROR_IFETCH;
@@ -683,6 +686,17 @@ static int mce_handle_error(struct pt_regs *regs, struct rtas_error_log *errp)
 #endif
 
 out:
+	/*
+	 * Enable translation as we will be accessing per-cpu variables
+	 * in save_mce_event() which may fall outside RMO region, also
+	 * leave it enabled because subsequently we will be queuing work
+	 * to workqueues where again per-cpu variables accessed, besides
+	 * fwnmi_release_errinfo() crashes when called in realmode on
+	 * pseries.
+	 * Note: All the realmode handling like flushing SLB entries for
+	 *       SLB multihit is done by now.
+	 */
+	mtmsr(mfmsr() | MSR_IR | MSR_DR);
 	save_mce_event(regs, disposition == RTAS_DISP_FULLY_RECOVERED,
 			&mce_err, regs->nip, eaddr, paddr);
 
diff --git a/arch/powerpc/platforms/pseries/vio.c b/arch/powerpc/platforms/pseries/vio.c
index f682b7b..37f1f25 100644
--- a/arch/powerpc/platforms/pseries/vio.c
+++ b/arch/powerpc/platforms/pseries/vio.c
@@ -1628,7 +1628,6 @@ const void *vio_get_attribute(struct vio_dev *vdev, char *which, int *length)
 }
 EXPORT_SYMBOL(vio_get_attribute);
 
-#ifdef CONFIG_PPC_PSERIES
 /* vio_find_name() - internal because only vio.c knows how we formatted the
  * kobject name
  */
@@ -1698,7 +1697,6 @@ int vio_disable_interrupts(struct vio_dev *dev)
 	return rc;
 }
 EXPORT_SYMBOL(vio_disable_interrupts);
-#endif /* CONFIG_PPC_PSERIES */
 
 static int __init vio_init(void)
 {
diff --git a/arch/powerpc/platforms/pseries/vphn.c b/arch/powerpc/platforms/pseries/vphn.c
index 3f07bf6..cca474a 100644
--- a/arch/powerpc/platforms/pseries/vphn.c
+++ b/arch/powerpc/platforms/pseries/vphn.c
@@ -82,7 +82,8 @@ long hcall_vphn(unsigned long cpu, u64 flags, __be32 *associativity)
 	long retbuf[PLPAR_HCALL9_BUFSIZE] = {0};
 
 	rc = plpar_hcall9(H_HOME_NODE_ASSOCIATIVITY, retbuf, flags, cpu);
-	vphn_unpack_associativity(retbuf, associativity);
+	if (rc == H_SUCCESS)
+		vphn_unpack_associativity(retbuf, associativity);
 
 	return rc;
 }
diff --git a/arch/powerpc/purgatory/.gitignore b/arch/powerpc/purgatory/.gitignore
index e9e66f1..b8dc6ff 100644
--- a/arch/powerpc/purgatory/.gitignore
+++ b/arch/powerpc/purgatory/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 kexec-purgatory.c
 purgatory.ro
diff --git a/arch/powerpc/sysdev/xive/common.c b/arch/powerpc/sysdev/xive/common.c
index 9651ca0..b294f70 100644
--- a/arch/powerpc/sysdev/xive/common.c
+++ b/arch/powerpc/sysdev/xive/common.c
@@ -20,6 +20,7 @@
 #include <linux/spinlock.h>
 #include <linux/msi.h>
 
+#include <asm/debugfs.h>
 #include <asm/prom.h>
 #include <asm/io.h>
 #include <asm/smp.h>
@@ -68,13 +69,6 @@ static u32 xive_ipi_irq;
 /* Xive state for each CPU */
 static DEFINE_PER_CPU(struct xive_cpu *, xive_cpu);
 
-/*
- * A "disabled" interrupt should never fire, to catch problems
- * we set its logical number to this
- */
-#define XIVE_BAD_IRQ		0x7fffffff
-#define XIVE_MAX_IRQ		(XIVE_BAD_IRQ - 1)
-
 /* An invalid CPU target */
 #define XIVE_INVALID_TARGET	(-1)
 
@@ -265,11 +259,15 @@ notrace void xmon_xive_do_dump(int cpu)
 
 int xmon_xive_get_irq_config(u32 hw_irq, struct irq_data *d)
 {
+	struct irq_chip *chip = irq_data_get_irq_chip(d);
 	int rc;
 	u32 target;
 	u8 prio;
 	u32 lirq;
 
+	if (!is_xive_irq(chip))
+		return -EINVAL;
+
 	rc = xive_ops->get_irq_config(hw_irq, &target, &prio, &lirq);
 	if (rc) {
 		xmon_printf("IRQ 0x%08x : no config rc=%d\n", hw_irq, rc);
@@ -283,7 +281,10 @@ int xmon_xive_get_irq_config(u32 hw_irq, struct irq_data *d)
 		struct xive_irq_data *xd = irq_data_get_irq_handler_data(d);
 		u64 val = xive_esb_read(xd, XIVE_ESB_GET);
 
-		xmon_printf("PQ=%c%c",
+		xmon_printf("flags=%c%c%c PQ=%c%c",
+			    xd->flags & XIVE_IRQ_FLAG_STORE_EOI ? 'S' : ' ',
+			    xd->flags & XIVE_IRQ_FLAG_LSI ? 'L' : ' ',
+			    xd->flags & XIVE_IRQ_FLAG_H_INT_ESB ? 'H' : ' ',
 			    val & XIVE_ESB_VAL_P ? 'P' : '-',
 			    val & XIVE_ESB_VAL_Q ? 'Q' : '-');
 	}
@@ -1150,7 +1151,7 @@ static int xive_setup_cpu_ipi(unsigned int cpu)
 	xc = per_cpu(xive_cpu, cpu);
 
 	/* Check if we are already setup */
-	if (xc->hw_ipi != 0)
+	if (xc->hw_ipi != XIVE_BAD_IRQ)
 		return 0;
 
 	/* Grab an IPI from the backend, this will populate xc->hw_ipi */
@@ -1187,7 +1188,7 @@ static void xive_cleanup_cpu_ipi(unsigned int cpu, struct xive_cpu *xc)
 	/* Disable the IPI and free the IRQ data */
 
 	/* Already cleaned up ? */
-	if (xc->hw_ipi == 0)
+	if (xc->hw_ipi == XIVE_BAD_IRQ)
 		return;
 
 	/* Mask the IPI */
@@ -1343,6 +1344,7 @@ static int xive_prepare_cpu(unsigned int cpu)
 		if (np)
 			xc->chip_id = of_get_ibm_chip_id(np);
 		of_node_put(np);
+		xc->hw_ipi = XIVE_BAD_IRQ;
 
 		per_cpu(xive_cpu, cpu) = xc;
 	}
@@ -1554,3 +1556,107 @@ static int __init xive_off(char *arg)
 	return 0;
 }
 __setup("xive=off", xive_off);
+
+void xive_debug_show_cpu(struct seq_file *m, int cpu)
+{
+	struct xive_cpu *xc = per_cpu(xive_cpu, cpu);
+
+	seq_printf(m, "CPU %d:", cpu);
+	if (xc) {
+		seq_printf(m, "pp=%02x CPPR=%02x ", xc->pending_prio, xc->cppr);
+
+#ifdef CONFIG_SMP
+		{
+			u64 val = xive_esb_read(&xc->ipi_data, XIVE_ESB_GET);
+
+			seq_printf(m, "IPI=0x%08x PQ=%c%c ", xc->hw_ipi,
+				   val & XIVE_ESB_VAL_P ? 'P' : '-',
+				   val & XIVE_ESB_VAL_Q ? 'Q' : '-');
+		}
+#endif
+		{
+			struct xive_q *q = &xc->queue[xive_irq_priority];
+			u32 i0, i1, idx;
+
+			if (q->qpage) {
+				idx = q->idx;
+				i0 = be32_to_cpup(q->qpage + idx);
+				idx = (idx + 1) & q->msk;
+				i1 = be32_to_cpup(q->qpage + idx);
+				seq_printf(m, "EQ idx=%d T=%d %08x %08x ...",
+					   q->idx, q->toggle, i0, i1);
+			}
+		}
+	}
+	seq_puts(m, "\n");
+}
+
+void xive_debug_show_irq(struct seq_file *m, u32 hw_irq, struct irq_data *d)
+{
+	struct irq_chip *chip = irq_data_get_irq_chip(d);
+	int rc;
+	u32 target;
+	u8 prio;
+	u32 lirq;
+
+	if (!is_xive_irq(chip))
+		return;
+
+	rc = xive_ops->get_irq_config(hw_irq, &target, &prio, &lirq);
+	if (rc) {
+		seq_printf(m, "IRQ 0x%08x : no config rc=%d\n", hw_irq, rc);
+		return;
+	}
+
+	seq_printf(m, "IRQ 0x%08x : target=0x%x prio=%02x lirq=0x%x ",
+		   hw_irq, target, prio, lirq);
+
+	if (d) {
+		struct xive_irq_data *xd = irq_data_get_irq_handler_data(d);
+		u64 val = xive_esb_read(xd, XIVE_ESB_GET);
+
+		seq_printf(m, "flags=%c%c%c PQ=%c%c",
+			   xd->flags & XIVE_IRQ_FLAG_STORE_EOI ? 'S' : ' ',
+			   xd->flags & XIVE_IRQ_FLAG_LSI ? 'L' : ' ',
+			   xd->flags & XIVE_IRQ_FLAG_H_INT_ESB ? 'H' : ' ',
+			   val & XIVE_ESB_VAL_P ? 'P' : '-',
+			   val & XIVE_ESB_VAL_Q ? 'Q' : '-');
+	}
+	seq_puts(m, "\n");
+}
+
+static int xive_core_debug_show(struct seq_file *m, void *private)
+{
+	unsigned int i;
+	struct irq_desc *desc;
+	int cpu;
+
+	if (xive_ops->debug_show)
+		xive_ops->debug_show(m, private);
+
+	for_each_possible_cpu(cpu)
+		xive_debug_show_cpu(m, cpu);
+
+	for_each_irq_desc(i, desc) {
+		struct irq_data *d = irq_desc_get_irq_data(desc);
+		unsigned int hw_irq;
+
+		if (!d)
+			continue;
+
+		hw_irq = (unsigned int)irqd_to_hwirq(d);
+
+		/* IPIs are special (HW number 0) */
+		if (hw_irq)
+			xive_debug_show_irq(m, hw_irq, d);
+	}
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(xive_core_debug);
+
+int xive_core_debug_init(void)
+{
+	debugfs_create_file("xive", 0400, powerpc_debugfs_root,
+			    NULL, &xive_core_debug_fops);
+	return 0;
+}
diff --git a/arch/powerpc/sysdev/xive/native.c b/arch/powerpc/sysdev/xive/native.c
index 0ff6b73..5218fdc 100644
--- a/arch/powerpc/sysdev/xive/native.c
+++ b/arch/powerpc/sysdev/xive/native.c
@@ -19,6 +19,7 @@
 #include <linux/cpumask.h>
 #include <linux/mm.h>
 
+#include <asm/machdep.h>
 #include <asm/prom.h>
 #include <asm/io.h>
 #include <asm/smp.h>
@@ -312,7 +313,7 @@ static void xive_native_put_ipi(unsigned int cpu, struct xive_cpu *xc)
 	s64 rc;
 
 	/* Free the IPI */
-	if (!xc->hw_ipi)
+	if (xc->hw_ipi == XIVE_BAD_IRQ)
 		return;
 	for (;;) {
 		rc = opal_xive_free_irq(xc->hw_ipi);
@@ -320,7 +321,7 @@ static void xive_native_put_ipi(unsigned int cpu, struct xive_cpu *xc)
 			msleep(OPAL_BUSY_DELAY_MS);
 			continue;
 		}
-		xc->hw_ipi = 0;
+		xc->hw_ipi = XIVE_BAD_IRQ;
 		break;
 	}
 }
@@ -850,3 +851,5 @@ int xive_native_get_vp_state(u32 vp_id, u64 *out_state)
 	return 0;
 }
 EXPORT_SYMBOL_GPL(xive_native_get_vp_state);
+
+machine_arch_initcall(powernv, xive_core_debug_init);
diff --git a/arch/powerpc/sysdev/xive/spapr.c b/arch/powerpc/sysdev/xive/spapr.c
index 55dc61c..7ab5c67 100644
--- a/arch/powerpc/sysdev/xive/spapr.c
+++ b/arch/powerpc/sysdev/xive/spapr.c
@@ -18,6 +18,7 @@
 #include <linux/delay.h>
 #include <linux/libfdt.h>
 
+#include <asm/machdep.h>
 #include <asm/prom.h>
 #include <asm/io.h>
 #include <asm/smp.h>
@@ -560,11 +561,11 @@ static int xive_spapr_get_ipi(unsigned int cpu, struct xive_cpu *xc)
 
 static void xive_spapr_put_ipi(unsigned int cpu, struct xive_cpu *xc)
 {
-	if (!xc->hw_ipi)
+	if (xc->hw_ipi == XIVE_BAD_IRQ)
 		return;
 
 	xive_irq_bitmap_free(xc->hw_ipi);
-	xc->hw_ipi = 0;
+	xc->hw_ipi = XIVE_BAD_IRQ;
 }
 #endif /* CONFIG_SMP */
 
@@ -645,6 +646,21 @@ static void xive_spapr_sync_source(u32 hw_irq)
 	plpar_int_sync(0, hw_irq);
 }
 
+static int xive_spapr_debug_show(struct seq_file *m, void *private)
+{
+	struct xive_irq_bitmap *xibm;
+	char *buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
+
+	list_for_each_entry(xibm, &xive_irq_bitmaps, list) {
+		memset(buf, 0, PAGE_SIZE);
+		bitmap_print_to_pagebuf(true, buf, xibm->bitmap, xibm->count);
+		seq_printf(m, "bitmap #%d: %s", xibm->count, buf);
+	}
+	kfree(buf);
+
+	return 0;
+}
+
 static const struct xive_ops xive_spapr_ops = {
 	.populate_irq_data	= xive_spapr_populate_irq_data,
 	.configure_irq		= xive_spapr_configure_irq,
@@ -662,6 +678,7 @@ static const struct xive_ops xive_spapr_ops = {
 #ifdef CONFIG_SMP
 	.get_ipi		= xive_spapr_get_ipi,
 	.put_ipi		= xive_spapr_put_ipi,
+	.debug_show		= xive_spapr_debug_show,
 #endif /* CONFIG_SMP */
 	.name			= "spapr",
 };
@@ -839,3 +856,5 @@ bool __init xive_spapr_init(void)
 	pr_info("Using %dkB queues\n", 1 << (xive_queue_shift - 10));
 	return true;
 }
+
+machine_arch_initcall(pseries, xive_core_debug_init);
diff --git a/arch/powerpc/sysdev/xive/xive-internal.h b/arch/powerpc/sysdev/xive/xive-internal.h
index 59cd366..b7b901d 100644
--- a/arch/powerpc/sysdev/xive/xive-internal.h
+++ b/arch/powerpc/sysdev/xive/xive-internal.h
@@ -5,6 +5,13 @@
 #ifndef __XIVE_INTERNAL_H
 #define __XIVE_INTERNAL_H
 
+/*
+ * A "disabled" interrupt should never fire, to catch problems
+ * we set its logical number to this
+ */
+#define XIVE_BAD_IRQ		0x7fffffff
+#define XIVE_MAX_IRQ		(XIVE_BAD_IRQ - 1)
+
 /* Each CPU carry one of these with various per-CPU state */
 struct xive_cpu {
 #ifdef CONFIG_SMP
@@ -50,12 +57,14 @@ struct xive_ops {
 	int	(*get_ipi)(unsigned int cpu, struct xive_cpu *xc);
 	void	(*put_ipi)(unsigned int cpu, struct xive_cpu *xc);
 #endif
+	int	(*debug_show)(struct seq_file *m, void *private);
 	const char *name;
 };
 
 bool xive_core_init(const struct xive_ops *ops, void __iomem *area, u32 offset,
 		    u8 max_prio);
 __be32 *xive_queue_page_alloc(unsigned int cpu, u32 queue_shift);
+int xive_core_debug_init(void);
 
 static inline u32 xive_alloc_order(u32 queue_shift)
 {
diff --git a/arch/powerpc/xmon/Makefile b/arch/powerpc/xmon/Makefile
index c3842db..6f9ccce 100644
--- a/arch/powerpc/xmon/Makefile
+++ b/arch/powerpc/xmon/Makefile
@@ -1,9 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 # Makefile for xmon
 
-# Avoid clang warnings around longjmp/setjmp declarations
-subdir-ccflags-y := -ffreestanding
-
 GCOV_PROFILE := n
 KCOV_INSTRUMENT := n
 UBSAN_SANITIZE := n
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 0ec9640..7af840c 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -81,8 +81,9 @@ static bool xmon_is_ro = IS_ENABLED(CONFIG_XMON_DEFAULT_RO_MODE);
 
 static unsigned long adrs;
 static int size = 1;
-#define MAX_DUMP (128 * 1024)
+#define MAX_DUMP (64 * 1024)
 static unsigned long ndump = 64;
+#define MAX_IDUMP (MAX_DUMP >> 2)
 static unsigned long nidump = 16;
 static unsigned long ncsum = 4096;
 static int termch;
@@ -2712,7 +2713,12 @@ static void dump_by_size(unsigned long addr, long count, int size)
 
 			printf("%0*llx", size * 2, val);
 		}
-		printf("\n");
+		printf("  |");
+		for (j = 0; j < 16; ++j) {
+			val = temp[j];
+			putchar(' ' <= val && val <= '~' ? val : '.');
+		}
+		printf("|\n");
 	}
 }
 
@@ -2756,8 +2762,8 @@ dump(void)
 		scanhex(&nidump);
 		if (nidump == 0)
 			nidump = 16;
-		else if (nidump > MAX_DUMP)
-			nidump = MAX_DUMP;
+		else if (nidump > MAX_IDUMP)
+			nidump = MAX_IDUMP;
 		adrs += ppc_inst_dump(adrs, nidump, 1);
 		last_cmd = "di\n";
 	} else if (c == 'l') {
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 8672e77..62f7bfe 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -20,7 +20,6 @@
 	select CLONE_BACKWARDS
 	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
-	select GENERIC_CPU_DEVICES
 	select GENERIC_IRQ_SHOW
 	select GENERIC_PCI_IOMAP
 	select GENERIC_SCHED_CLOCK
@@ -29,6 +28,7 @@
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_ATOMIC64 if !64BIT
 	select GENERIC_IOREMAP
+	select GENERIC_PTDUMP if MMU
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_ARCH_SECCOMP_FILTER
 	select HAVE_ASM_MODVERSIONS
@@ -55,9 +55,12 @@
 	select ARCH_HAS_PTE_SPECIAL
 	select ARCH_HAS_MMIOWB
 	select ARCH_HAS_DEBUG_VIRTUAL
-	select HAVE_EBPF_JIT
+	select HAVE_EBPF_JIT if MMU
 	select EDAC_SUPPORT
 	select ARCH_HAS_GIGANTIC_PAGE
+	select ARCH_HAS_SET_DIRECT_MAP
+	select ARCH_HAS_SET_MEMORY
+	select ARCH_HAS_STRICT_KERNEL_RWX
 	select ARCH_WANT_HUGE_PMD_SHARE if 64BIT
 	select SPARSEMEM_STATIC if 32BIT
 	select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT if MMU
@@ -129,6 +132,9 @@
 config ARCH_WANT_GENERAL_HUGETLB
 	def_bool y
 
+config ARCH_SUPPORTS_DEBUG_PAGEALLOC
+	def_bool y
+
 config SYS_SUPPORTS_HUGETLBFS
 	def_bool y
 
@@ -247,6 +253,17 @@
 	depends on SMP
 	default "8"
 
+config HOTPLUG_CPU
+	bool "Support for hot-pluggable CPUs"
+	depends on SMP
+	select GENERIC_IRQ_MIGRATION
+	help
+
+	  Say Y here to experiment with turning CPUs off and on.  CPUs
+	  can be controlled through /sys/devices/system/cpu.
+
+	  Say N if you want to disable CPU hotplug.
+
 choice
 	prompt "CPU Tuning"
 	default TUNE_GENERIC
@@ -307,6 +324,13 @@
 	  and the task is only allowed to execute a few safe syscalls
 	  defined by each seccomp mode.
 
+config RISCV_SBI_V01
+	bool "SBI v0.1 support"
+	default y
+	depends on RISCV_SBI
+	help
+	  This config allows kernel to use SBI v0.1 APIs. This will be
+	  deprecated in future once legacy M-mode software are no longer in use.
 endmenu
 
 menu "Boot options"
diff --git a/arch/riscv/Kconfig.socs b/arch/riscv/Kconfig.socs
index a131174a..216286d 100644
--- a/arch/riscv/Kconfig.socs
+++ b/arch/riscv/Kconfig.socs
@@ -20,4 +20,14 @@
        help
          This enables support for QEMU Virt Machine.
 
+config SOC_KENDRYTE
+	bool "Kendryte K210 SoC"
+	depends on !MMU
+	select BUILTIN_DTB
+	select SERIAL_SIFIVE if TTY
+	select SERIAL_SIFIVE_CONSOLE if TTY
+	select SIFIVE_PLIC
+	help
+	  This enables support for Kendryte K210 SoC platform hardware.
+
 endmenu
diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
index 259cb53..fb6e37d 100644
--- a/arch/riscv/Makefile
+++ b/arch/riscv/Makefile
@@ -85,12 +85,12 @@
 vdso_install:
 	$(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@
 
-ifeq ($(CONFIG_RISCV_M_MODE),y)
-KBUILD_IMAGE := $(boot)/loader
+ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_SOC_KENDRYTE),yy)
+KBUILD_IMAGE := $(boot)/loader.bin
 else
 KBUILD_IMAGE := $(boot)/Image.gz
 endif
-BOOT_TARGETS := Image Image.gz loader
+BOOT_TARGETS := Image Image.gz loader loader.bin
 
 all:	$(notdir $(KBUILD_IMAGE))
 
diff --git a/arch/riscv/boot/.gitignore b/arch/riscv/boot/.gitignore
index 8a45a37..574c10f 100644
--- a/arch/riscv/boot/.gitignore
+++ b/arch/riscv/boot/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 Image
 Image.gz
 loader
diff --git a/arch/riscv/boot/Makefile b/arch/riscv/boot/Makefile
index 36db8145..3530c59 100644
--- a/arch/riscv/boot/Makefile
+++ b/arch/riscv/boot/Makefile
@@ -41,6 +41,9 @@
 $(obj)/Image.lzo: $(obj)/Image FORCE
 	$(call if_changed,lzo)
 
+$(obj)/loader.bin: $(obj)/loader FORCE
+	$(call if_changed,objcopy)
+
 install:
 	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
 	$(obj)/Image System.map "$(INSTALL_PATH)"
diff --git a/arch/riscv/boot/dts/Makefile b/arch/riscv/boot/dts/Makefile
index dcc3ada..557f0b5 100644
--- a/arch/riscv/boot/dts/Makefile
+++ b/arch/riscv/boot/dts/Makefile
@@ -1,2 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0
 subdir-y += sifive
+subdir-y += kendryte
diff --git a/arch/riscv/boot/dts/kendryte/Makefile b/arch/riscv/boot/dts/kendryte/Makefile
new file mode 100644
index 0000000..815444e
--- /dev/null
+++ b/arch/riscv/boot/dts/kendryte/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_SOC_KENDRYTE) += k210.dtb
diff --git a/arch/riscv/boot/dts/kendryte/k210.dts b/arch/riscv/boot/dts/kendryte/k210.dts
new file mode 100644
index 0000000..0d1f28fc
--- /dev/null
+++ b/arch/riscv/boot/dts/kendryte/k210.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ */
+
+/dts-v1/;
+
+#include "k210.dtsi"
+
+/ {
+	model = "Kendryte K210 generic";
+	compatible = "kendryte,k210";
+
+	chosen {
+		bootargs = "earlycon console=ttySIF0";
+		stdout-path = "serial0";
+	};
+};
+
+&uarths0 {
+	status = "okay";
+};
+
diff --git a/arch/riscv/boot/dts/kendryte/k210.dtsi b/arch/riscv/boot/dts/kendryte/k210.dtsi
new file mode 100644
index 0000000..c1df56c
--- /dev/null
+++ b/arch/riscv/boot/dts/kendryte/k210.dtsi
@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Sean Anderson <seanga2@gmail.com>
+ * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ */
+#include <dt-bindings/clock/k210-clk.h>
+
+/ {
+	/*
+	 * Although the K210 is a 64-bit CPU, the address bus is only 32-bits
+	 * wide, and the upper half of all addresses is ignored.
+	 */
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "kendryte,k210";
+
+	aliases {
+		serial0 = &uarths0;
+	};
+
+	/*
+	 * The K210 has an sv39 MMU following the priviledge specification v1.9.
+	 * Since this is a non-ratified draft specification, the kernel does not
+	 * support it and the K210 support enabled only for the !MMU case.
+	 * Be consistent with this by setting the CPUs MMU type to "none".
+	 */
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		timebase-frequency = <7800000>;
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			reg = <0>;
+			compatible = "kendryte,k210", "sifive,rocket0", "riscv";
+			riscv,isa = "rv64imafdc";
+			mmu-type = "none";
+			i-cache-size = <0x8000>;
+			i-cache-block-size = <64>;
+			d-cache-size = <0x8000>;
+			d-cache-block-size = <64>;
+			clocks = <&sysctl K210_CLK_CPU>;
+			clock-frequency = <390000000>;
+			cpu0_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				compatible = "riscv,cpu-intc";
+			};
+		};
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			reg = <1>;
+			compatible = "kendryte,k210", "sifive,rocket0", "riscv";
+			riscv,isa = "rv64imafdc";
+			mmu-type = "none";
+			i-cache-size = <0x8000>;
+			i-cache-block-size = <64>;
+			d-cache-size = <0x8000>;
+			d-cache-block-size = <64>;
+			clocks = <&sysctl K210_CLK_CPU>;
+			clock-frequency = <390000000>;
+			cpu1_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				compatible = "riscv,cpu-intc";
+			};
+		};
+	};
+
+	sram: memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x400000>,
+		      <0x80400000 0x200000>,
+		      <0x80600000 0x200000>;
+		reg-names = "sram0", "sram1", "aisram";
+	};
+
+	clocks {
+		in0: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <26000000>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "kendryte,k210-soc", "simple-bus";
+		ranges;
+		interrupt-parent = <&plic0>;
+
+		sysctl: sysctl@50440000 {
+			compatible = "kendryte,k210-sysctl", "simple-mfd";
+			reg = <0x50440000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		clint0: interrupt-controller@2000000 {
+			compatible = "riscv,clint0";
+			reg = <0x2000000 0xC000>;
+			interrupts-extended = <&cpu0_intc 3>,  <&cpu1_intc 3>;
+			clocks = <&sysctl K210_CLK_ACLK>;
+		};
+
+		plic0: interrupt-controller@c000000 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			compatible = "kendryte,k210-plic0", "riscv,plic0";
+			reg = <0xC000000 0x4000000>;
+			interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 0xffffffff>,
+					      <&cpu1_intc 11>, <&cpu1_intc 0xffffffff>;
+			riscv,ndev = <65>;
+			riscv,max-priority = <7>;
+		};
+
+		uarths0: serial@38000000 {
+			compatible = "kendryte,k210-uarths", "sifive,uart0";
+			reg = <0x38000000 0x1000>;
+			interrupts = <33>;
+			clocks = <&sysctl K210_CLK_CPU>;
+		};
+	};
+};
diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig
index 2557c53..4da4886 100644
--- a/arch/riscv/configs/defconfig
+++ b/arch/riscv/configs/defconfig
@@ -128,3 +128,4 @@
 # CONFIG_FTRACE is not set
 # CONFIG_RUNTIME_TESTING_MENU is not set
 CONFIG_MEMTEST=y
+# CONFIG_SYSFS_SYSCALL is not set
diff --git a/arch/riscv/configs/nommu_k210_defconfig b/arch/riscv/configs/nommu_k210_defconfig
new file mode 100644
index 0000000..632aa2f
--- /dev/null
+++ b/arch/riscv/configs/nommu_k210_defconfig
@@ -0,0 +1,68 @@
+# CONFIG_CPU_ISOLATION is not set
+CONFIG_LOG_BUF_SHIFT=15
+CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=12
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INITRAMFS_FORCE=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_XZ is not set
+# CONFIG_RD_LZO is not set
+# CONFIG_RD_LZ4 is not set
+# CONFIG_BOOT_CONFIG is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_SYSFS_SYSCALL is not set
+# CONFIG_FHANDLE is not set
+# CONFIG_BASE_FULL is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+# CONFIG_IO_URING is not set
+# CONFIG_ADVISE_SYSCALLS is not set
+# CONFIG_MEMBARRIER is not set
+# CONFIG_KALLSYMS is not set
+CONFIG_EMBEDDED=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLOB=y
+# CONFIG_SLAB_MERGE_DEFAULT is not set
+# CONFIG_MMU is not set
+CONFIG_SOC_KENDRYTE=y
+CONFIG_MAXPHYSMEM_2GB=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_CMDLINE="earlycon console=ttySIF0"
+CONFIG_CMDLINE_FORCE=y
+CONFIG_USE_BUILTIN_DTB=y
+CONFIG_BUILTIN_DTB_SOURCE="kendryte/k210"
+# CONFIG_BLOCK is not set
+CONFIG_BINFMT_FLAT=y
+# CONFIG_COREDUMP is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_ALLOW_DEV_COREDUMP is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_LDISC_AUTOLOAD is not set
+# CONFIG_DEVMEM is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_VIRTIO_MENU is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_LSM="[]"
+CONFIG_PRINTK_TIME=y
+# CONFIG_DEBUG_MISC is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_FTRACE is not set
+# CONFIG_RUNTIME_TESTING_MENU is not set
diff --git a/arch/riscv/configs/rv32_defconfig b/arch/riscv/configs/rv32_defconfig
index 0292879..05bbf52 100644
--- a/arch/riscv/configs/rv32_defconfig
+++ b/arch/riscv/configs/rv32_defconfig
@@ -124,3 +124,4 @@
 # CONFIG_FTRACE is not set
 # CONFIG_RUNTIME_TESTING_MENU is not set
 CONFIG_MEMTEST=y
+# CONFIG_SYSFS_SYSCALL is not set
diff --git a/arch/riscv/include/asm/bug.h b/arch/riscv/include/asm/bug.h
index 75604fe..d6f1ec0 100644
--- a/arch/riscv/include/asm/bug.h
+++ b/arch/riscv/include/asm/bug.h
@@ -19,6 +19,14 @@
 #define __BUG_INSN_32	_UL(0x00100073) /* ebreak */
 #define __BUG_INSN_16	_UL(0x9002) /* c.ebreak */
 
+#define GET_INSN_LENGTH(insn)						\
+({									\
+	unsigned long __len;						\
+	__len = ((insn & __INSN_LENGTH_MASK) == __INSN_LENGTH_32) ?	\
+		4UL : 2UL;						\
+	__len;								\
+})
+
 typedef u32 bug_insn_t;
 
 #ifdef CONFIG_GENERIC_BUG_RELATIVE_POINTERS
diff --git a/arch/riscv/include/asm/cacheflush.h b/arch/riscv/include/asm/cacheflush.h
index 555b20b..c8677c7 100644
--- a/arch/riscv/include/asm/cacheflush.h
+++ b/arch/riscv/include/asm/cacheflush.h
@@ -85,7 +85,7 @@ static inline void flush_dcache_page(struct page *page)
  * so instead we just flush the whole thing.
  */
 #define flush_icache_range(start, end) flush_icache_all()
-#define flush_icache_user_range(vma, pg, addr, len) flush_icache_all()
+#define flush_icache_user_range(vma, pg, addr, len) flush_icache_mm(vma->vm_mm, 0)
 
 #ifndef CONFIG_SMP
 
diff --git a/arch/riscv/include/asm/cpu_ops.h b/arch/riscv/include/asm/cpu_ops.h
new file mode 100644
index 0000000..a8ec3c5
--- /dev/null
+++ b/arch/riscv/include/asm/cpu_ops.h
@@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2020 Western Digital Corporation or its affiliates.
+ * Based on arch/arm64/include/asm/cpu_ops.h
+ */
+#ifndef __ASM_CPU_OPS_H
+#define __ASM_CPU_OPS_H
+
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/threads.h>
+
+/**
+ * struct cpu_operations - Callback operations for hotplugging CPUs.
+ *
+ * @name:		Name of the boot protocol.
+ * @cpu_prepare:	Early one-time preparation step for a cpu. If there
+ *			is a mechanism for doing so, tests whether it is
+ *			possible to boot the given HART.
+ * @cpu_start:		Boots a cpu into the kernel.
+ * @cpu_disable:	Prepares a cpu to die. May fail for some
+ *			mechanism-specific reason, which will cause the hot
+ *			unplug to be aborted. Called from the cpu to be killed.
+ * @cpu_stop:		Makes a cpu leave the kernel. Must not fail. Called from
+ *			the cpu being stopped.
+ * @cpu_is_stopped:	Ensures a cpu has left the kernel. Called from another
+ *			cpu.
+ */
+struct cpu_operations {
+	const char	*name;
+	int		(*cpu_prepare)(unsigned int cpu);
+	int		(*cpu_start)(unsigned int cpu,
+				     struct task_struct *tidle);
+#ifdef CONFIG_HOTPLUG_CPU
+	int		(*cpu_disable)(unsigned int cpu);
+	void		(*cpu_stop)(void);
+	int		(*cpu_is_stopped)(unsigned int cpu);
+#endif
+};
+
+extern const struct cpu_operations *cpu_ops[NR_CPUS];
+void __init cpu_set_ops(int cpu);
+void cpu_update_secondary_bootdata(unsigned int cpuid,
+				   struct task_struct *tidle);
+
+#endif /* ifndef __ASM_CPU_OPS_H */
diff --git a/arch/riscv/include/asm/current.h b/arch/riscv/include/asm/current.h
index dd973ef..1de233d 100644
--- a/arch/riscv/include/asm/current.h
+++ b/arch/riscv/include/asm/current.h
@@ -17,6 +17,8 @@
 
 struct task_struct;
 
+register struct task_struct *riscv_current_is_tp __asm__("tp");
+
 /*
  * This only works because "struct thread_info" is at offset 0 from "struct
  * task_struct".  This constraint seems to be necessary on other architectures
@@ -26,8 +28,7 @@ struct task_struct;
  */
 static __always_inline struct task_struct *get_current(void)
 {
-	register struct task_struct *tp __asm__("tp");
-	return tp;
+	return riscv_current_is_tp;
 }
 
 #define current get_current()
diff --git a/arch/riscv/include/asm/fixmap.h b/arch/riscv/include/asm/fixmap.h
index 42d2c42..2368d49 100644
--- a/arch/riscv/include/asm/fixmap.h
+++ b/arch/riscv/include/asm/fixmap.h
@@ -27,6 +27,8 @@ enum fixed_addresses {
 	FIX_FDT = FIX_FDT_END + FIX_FDT_SIZE / PAGE_SIZE - 1,
 	FIX_PTE,
 	FIX_PMD,
+	FIX_TEXT_POKE1,
+	FIX_TEXT_POKE0,
 	FIX_EARLYCON_MEM_BASE,
 	__end_of_fixed_addresses
 };
diff --git a/arch/riscv/include/asm/kasan.h b/arch/riscv/include/asm/kasan.h
index eee6e65..b47045c 100644
--- a/arch/riscv/include/asm/kasan.h
+++ b/arch/riscv/include/asm/kasan.h
@@ -13,7 +13,7 @@
 #define KASAN_SHADOW_SCALE_SHIFT	3
 
 #define KASAN_SHADOW_SIZE	(UL(1) << (38 - KASAN_SHADOW_SCALE_SHIFT))
-#define KASAN_SHADOW_START	0xffffffc000000000 /* 2^64 - 2^38 */
+#define KASAN_SHADOW_START	KERN_VIRT_START /* 2^64 - 2^38 */
 #define KASAN_SHADOW_END	(KASAN_SHADOW_START + KASAN_SHADOW_SIZE)
 
 #define KASAN_SHADOW_OFFSET	(KASAN_SHADOW_END - (1ULL << \
diff --git a/arch/riscv/include/asm/page.h b/arch/riscv/include/asm/page.h
index 8ca1930..2d50f76 100644
--- a/arch/riscv/include/asm/page.h
+++ b/arch/riscv/include/asm/page.h
@@ -137,8 +137,7 @@ extern phys_addr_t __phys_addr_symbol(unsigned long x);
 
 #define virt_addr_valid(vaddr)	(pfn_valid(virt_to_pfn(vaddr)))
 
-#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | \
-				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+#define VM_DATA_DEFAULT_FLAGS	VM_DATA_FLAGS_NON_EXEC
 
 #include <asm-generic/memory_model.h>
 #include <asm-generic/getorder.h>
diff --git a/arch/riscv/include/asm/patch.h b/arch/riscv/include/asm/patch.h
new file mode 100644
index 0000000..b5918a6
--- /dev/null
+++ b/arch/riscv/include/asm/patch.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2020 SiFive
+ */
+
+#ifndef _ASM_RISCV_PATCH_H
+#define _ASM_RISCV_PATCH_H
+
+int riscv_patch_text_nosync(void *addr, const void *insns, size_t len);
+int riscv_patch_text(void *addr, u32 insn);
+
+#endif /* _ASM_RISCV_PATCH_H */
diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h
index 393f201..9c188ad 100644
--- a/arch/riscv/include/asm/pgtable.h
+++ b/arch/riscv/include/asm/pgtable.h
@@ -449,6 +449,16 @@ static inline int ptep_clear_flush_young(struct vm_area_struct *vma,
 #define __swp_entry_to_pte(x)	((pte_t) { (x).val })
 
 /*
+ * In the RV64 Linux scheme, we give the user half of the virtual-address space
+ * and give the kernel the other (upper) half.
+ */
+#ifdef CONFIG_64BIT
+#define KERN_VIRT_START	(-(BIT(CONFIG_VA_BITS)) + TASK_SIZE)
+#else
+#define KERN_VIRT_START	FIXADDR_START
+#endif
+
+/*
  * Task size is 0x4000000000 for RV64 or 0x9fc00000 for RV32.
  * Note that PGDIR_SIZE must evenly divide TASK_SIZE.
  */
diff --git a/arch/riscv/include/asm/ptdump.h b/arch/riscv/include/asm/ptdump.h
new file mode 100644
index 0000000..e29af71
--- /dev/null
+++ b/arch/riscv/include/asm/ptdump.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2019 SiFive
+ */
+
+#ifndef _ASM_RISCV_PTDUMP_H
+#define _ASM_RISCV_PTDUMP_H
+
+void ptdump_check_wx(void);
+
+#endif /* _ASM_RISCV_PTDUMP_H */
diff --git a/arch/riscv/include/asm/sbi.h b/arch/riscv/include/asm/sbi.h
index 2570c1e..653edb2 100644
--- a/arch/riscv/include/asm/sbi.h
+++ b/arch/riscv/include/asm/sbi.h
@@ -1,6 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Copyright (C) 2015 Regents of the University of California
+ * Copyright (c) 2020 Western Digital Corporation or its affiliates.
  */
 
 #ifndef _ASM_RISCV_SBI_H
@@ -9,96 +10,148 @@
 #include <linux/types.h>
 
 #ifdef CONFIG_RISCV_SBI
-#define SBI_SET_TIMER 0
-#define SBI_CONSOLE_PUTCHAR 1
-#define SBI_CONSOLE_GETCHAR 2
-#define SBI_CLEAR_IPI 3
-#define SBI_SEND_IPI 4
-#define SBI_REMOTE_FENCE_I 5
-#define SBI_REMOTE_SFENCE_VMA 6
-#define SBI_REMOTE_SFENCE_VMA_ASID 7
-#define SBI_SHUTDOWN 8
-
-#define SBI_CALL(which, arg0, arg1, arg2, arg3) ({		\
-	register uintptr_t a0 asm ("a0") = (uintptr_t)(arg0);	\
-	register uintptr_t a1 asm ("a1") = (uintptr_t)(arg1);	\
-	register uintptr_t a2 asm ("a2") = (uintptr_t)(arg2);	\
-	register uintptr_t a3 asm ("a3") = (uintptr_t)(arg3);	\
-	register uintptr_t a7 asm ("a7") = (uintptr_t)(which);	\
-	asm volatile ("ecall"					\
-		      : "+r" (a0)				\
-		      : "r" (a1), "r" (a2), "r" (a3), "r" (a7)	\
-		      : "memory");				\
-	a0;							\
-})
-
-/* Lazy implementations until SBI is finalized */
-#define SBI_CALL_0(which) SBI_CALL(which, 0, 0, 0, 0)
-#define SBI_CALL_1(which, arg0) SBI_CALL(which, arg0, 0, 0, 0)
-#define SBI_CALL_2(which, arg0, arg1) SBI_CALL(which, arg0, arg1, 0, 0)
-#define SBI_CALL_3(which, arg0, arg1, arg2) \
-		SBI_CALL(which, arg0, arg1, arg2, 0)
-#define SBI_CALL_4(which, arg0, arg1, arg2, arg3) \
-		SBI_CALL(which, arg0, arg1, arg2, arg3)
-
-static inline void sbi_console_putchar(int ch)
-{
-	SBI_CALL_1(SBI_CONSOLE_PUTCHAR, ch);
-}
-
-static inline int sbi_console_getchar(void)
-{
-	return SBI_CALL_0(SBI_CONSOLE_GETCHAR);
-}
-
-static inline void sbi_set_timer(uint64_t stime_value)
-{
-#if __riscv_xlen == 32
-	SBI_CALL_2(SBI_SET_TIMER, stime_value, stime_value >> 32);
-#else
-	SBI_CALL_1(SBI_SET_TIMER, stime_value);
+enum sbi_ext_id {
+#ifdef CONFIG_RISCV_SBI_V01
+	SBI_EXT_0_1_SET_TIMER = 0x0,
+	SBI_EXT_0_1_CONSOLE_PUTCHAR = 0x1,
+	SBI_EXT_0_1_CONSOLE_GETCHAR = 0x2,
+	SBI_EXT_0_1_CLEAR_IPI = 0x3,
+	SBI_EXT_0_1_SEND_IPI = 0x4,
+	SBI_EXT_0_1_REMOTE_FENCE_I = 0x5,
+	SBI_EXT_0_1_REMOTE_SFENCE_VMA = 0x6,
+	SBI_EXT_0_1_REMOTE_SFENCE_VMA_ASID = 0x7,
+	SBI_EXT_0_1_SHUTDOWN = 0x8,
 #endif
+	SBI_EXT_BASE = 0x10,
+	SBI_EXT_TIME = 0x54494D45,
+	SBI_EXT_IPI = 0x735049,
+	SBI_EXT_RFENCE = 0x52464E43,
+	SBI_EXT_HSM = 0x48534D,
+};
+
+enum sbi_ext_base_fid {
+	SBI_EXT_BASE_GET_SPEC_VERSION = 0,
+	SBI_EXT_BASE_GET_IMP_ID,
+	SBI_EXT_BASE_GET_IMP_VERSION,
+	SBI_EXT_BASE_PROBE_EXT,
+	SBI_EXT_BASE_GET_MVENDORID,
+	SBI_EXT_BASE_GET_MARCHID,
+	SBI_EXT_BASE_GET_MIMPID,
+};
+
+enum sbi_ext_time_fid {
+	SBI_EXT_TIME_SET_TIMER = 0,
+};
+
+enum sbi_ext_ipi_fid {
+	SBI_EXT_IPI_SEND_IPI = 0,
+};
+
+enum sbi_ext_rfence_fid {
+	SBI_EXT_RFENCE_REMOTE_FENCE_I = 0,
+	SBI_EXT_RFENCE_REMOTE_SFENCE_VMA,
+	SBI_EXT_RFENCE_REMOTE_SFENCE_VMA_ASID,
+	SBI_EXT_RFENCE_REMOTE_HFENCE_GVMA,
+	SBI_EXT_RFENCE_REMOTE_HFENCE_GVMA_VMID,
+	SBI_EXT_RFENCE_REMOTE_HFENCE_VVMA,
+	SBI_EXT_RFENCE_REMOTE_HFENCE_VVMA_ASID,
+};
+
+enum sbi_ext_hsm_fid {
+	SBI_EXT_HSM_HART_START = 0,
+	SBI_EXT_HSM_HART_STOP,
+	SBI_EXT_HSM_HART_STATUS,
+};
+
+enum sbi_hsm_hart_status {
+	SBI_HSM_HART_STATUS_STARTED = 0,
+	SBI_HSM_HART_STATUS_STOPPED,
+	SBI_HSM_HART_STATUS_START_PENDING,
+	SBI_HSM_HART_STATUS_STOP_PENDING,
+};
+
+#define SBI_SPEC_VERSION_DEFAULT	0x1
+#define SBI_SPEC_VERSION_MAJOR_SHIFT	24
+#define SBI_SPEC_VERSION_MAJOR_MASK	0x7f
+#define SBI_SPEC_VERSION_MINOR_MASK	0xffffff
+
+/* SBI return error codes */
+#define SBI_SUCCESS		0
+#define SBI_ERR_FAILURE		-1
+#define SBI_ERR_NOT_SUPPORTED	-2
+#define SBI_ERR_INVALID_PARAM	-3
+#define SBI_ERR_DENIED		-4
+#define SBI_ERR_INVALID_ADDRESS	-5
+
+extern unsigned long sbi_spec_version;
+struct sbiret {
+	long error;
+	long value;
+};
+
+int sbi_init(void);
+struct sbiret sbi_ecall(int ext, int fid, unsigned long arg0,
+			unsigned long arg1, unsigned long arg2,
+			unsigned long arg3, unsigned long arg4,
+			unsigned long arg5);
+
+void sbi_console_putchar(int ch);
+int sbi_console_getchar(void);
+void sbi_set_timer(uint64_t stime_value);
+void sbi_shutdown(void);
+void sbi_clear_ipi(void);
+void sbi_send_ipi(const unsigned long *hart_mask);
+void sbi_remote_fence_i(const unsigned long *hart_mask);
+void sbi_remote_sfence_vma(const unsigned long *hart_mask,
+			   unsigned long start,
+			   unsigned long size);
+
+void sbi_remote_sfence_vma_asid(const unsigned long *hart_mask,
+				unsigned long start,
+				unsigned long size,
+				unsigned long asid);
+int sbi_remote_hfence_gvma(const unsigned long *hart_mask,
+			   unsigned long start,
+			   unsigned long size);
+int sbi_remote_hfence_gvma_vmid(const unsigned long *hart_mask,
+				unsigned long start,
+				unsigned long size,
+				unsigned long vmid);
+int sbi_remote_hfence_vvma(const unsigned long *hart_mask,
+			   unsigned long start,
+			   unsigned long size);
+int sbi_remote_hfence_vvma_asid(const unsigned long *hart_mask,
+				unsigned long start,
+				unsigned long size,
+				unsigned long asid);
+int sbi_probe_extension(int ext);
+
+/* Check if current SBI specification version is 0.1 or not */
+static inline int sbi_spec_is_0_1(void)
+{
+	return (sbi_spec_version == SBI_SPEC_VERSION_DEFAULT) ? 1 : 0;
 }
 
-static inline void sbi_shutdown(void)
+/* Get the major version of SBI */
+static inline unsigned long sbi_major_version(void)
 {
-	SBI_CALL_0(SBI_SHUTDOWN);
+	return (sbi_spec_version >> SBI_SPEC_VERSION_MAJOR_SHIFT) &
+		SBI_SPEC_VERSION_MAJOR_MASK;
 }
 
-static inline void sbi_clear_ipi(void)
+/* Get the minor version of SBI */
+static inline unsigned long sbi_minor_version(void)
 {
-	SBI_CALL_0(SBI_CLEAR_IPI);
+	return sbi_spec_version & SBI_SPEC_VERSION_MINOR_MASK;
 }
 
-static inline void sbi_send_ipi(const unsigned long *hart_mask)
-{
-	SBI_CALL_1(SBI_SEND_IPI, hart_mask);
-}
-
-static inline void sbi_remote_fence_i(const unsigned long *hart_mask)
-{
-	SBI_CALL_1(SBI_REMOTE_FENCE_I, hart_mask);
-}
-
-static inline void sbi_remote_sfence_vma(const unsigned long *hart_mask,
-					 unsigned long start,
-					 unsigned long size)
-{
-	SBI_CALL_3(SBI_REMOTE_SFENCE_VMA, hart_mask, start, size);
-}
-
-static inline void sbi_remote_sfence_vma_asid(const unsigned long *hart_mask,
-					      unsigned long start,
-					      unsigned long size,
-					      unsigned long asid)
-{
-	SBI_CALL_4(SBI_REMOTE_SFENCE_VMA_ASID, hart_mask, start, size, asid);
-}
+int sbi_err_map_linux_errno(int err);
 #else /* CONFIG_RISCV_SBI */
 /* stubs for code that is only reachable under IS_ENABLED(CONFIG_RISCV_SBI): */
 void sbi_set_timer(uint64_t stime_value);
 void sbi_clear_ipi(void);
 void sbi_send_ipi(const unsigned long *hart_mask);
 void sbi_remote_fence_i(const unsigned long *hart_mask);
+void sbi_init(void);
 #endif /* CONFIG_RISCV_SBI */
 #endif /* _ASM_RISCV_SBI_H */
diff --git a/arch/riscv/include/asm/set_memory.h b/arch/riscv/include/asm/set_memory.h
new file mode 100644
index 0000000..c38df47
--- /dev/null
+++ b/arch/riscv/include/asm/set_memory.h
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2019 SiFive
+ */
+
+#ifndef _ASM_RISCV_SET_MEMORY_H
+#define _ASM_RISCV_SET_MEMORY_H
+
+#ifndef __ASSEMBLY__
+/*
+ * Functions to change memory attributes.
+ */
+#ifdef CONFIG_MMU
+int set_memory_ro(unsigned long addr, int numpages);
+int set_memory_rw(unsigned long addr, int numpages);
+int set_memory_x(unsigned long addr, int numpages);
+int set_memory_nx(unsigned long addr, int numpages);
+#else
+static inline int set_memory_ro(unsigned long addr, int numpages) { return 0; }
+static inline int set_memory_rw(unsigned long addr, int numpages) { return 0; }
+static inline int set_memory_x(unsigned long addr, int numpages) { return 0; }
+static inline int set_memory_nx(unsigned long addr, int numpages) { return 0; }
+#endif
+
+#ifdef CONFIG_STRICT_KERNEL_RWX
+void set_kernel_text_ro(void);
+void set_kernel_text_rw(void);
+#else
+static inline void set_kernel_text_ro(void) { }
+static inline void set_kernel_text_rw(void) { }
+#endif
+
+int set_direct_map_invalid_noflush(struct page *page);
+int set_direct_map_default_noflush(struct page *page);
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef CONFIG_ARCH_HAS_STRICT_KERNEL_RWX
+#ifdef CONFIG_64BIT
+#define SECTION_ALIGN (1 << 21)
+#else
+#define SECTION_ALIGN (1 << 22)
+#endif
+#else /* !CONFIG_ARCH_HAS_STRICT_KERNEL_RWX */
+#define SECTION_ALIGN L1_CACHE_BYTES
+#endif /* CONFIG_ARCH_HAS_STRICT_KERNEL_RWX */
+
+#endif /* _ASM_RISCV_SET_MEMORY_H */
diff --git a/arch/riscv/include/asm/smp.h b/arch/riscv/include/asm/smp.h
index a83451d..f4c7cfd 100644
--- a/arch/riscv/include/asm/smp.h
+++ b/arch/riscv/include/asm/smp.h
@@ -43,6 +43,13 @@ void riscv_cpuid_to_hartid_mask(const struct cpumask *in, struct cpumask *out);
  */
 #define raw_smp_processor_id() (current_thread_info()->cpu)
 
+#if defined CONFIG_HOTPLUG_CPU
+int __cpu_disable(void);
+void __cpu_die(unsigned int cpu);
+void cpu_stop(void);
+#else
+#endif /* CONFIG_HOTPLUG_CPU */
+
 #else
 
 static inline void show_ipi_stats(struct seq_file *p, int prec)
@@ -61,5 +68,22 @@ static inline unsigned long cpuid_to_hartid_map(int cpu)
 	return boot_cpu_hartid;
 }
 
+static inline void riscv_cpuid_to_hartid_mask(const struct cpumask *in,
+					      struct cpumask *out)
+{
+	cpumask_clear(out);
+	cpumask_set_cpu(boot_cpu_hartid, out);
+}
+
 #endif /* CONFIG_SMP */
+
+#if defined(CONFIG_HOTPLUG_CPU) && (CONFIG_SMP)
+bool cpu_has_hotplug(unsigned int cpu);
+#else
+static inline bool cpu_has_hotplug(unsigned int cpu)
+{
+	return false;
+}
+#endif
+
 #endif /* _ASM_RISCV_SMP_H */
diff --git a/arch/riscv/include/asm/soc.h b/arch/riscv/include/asm/soc.h
new file mode 100644
index 0000000..7cec196
--- /dev/null
+++ b/arch/riscv/include/asm/soc.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ */
+
+#ifndef _ASM_RISCV_SOC_H
+#define _ASM_RISCV_SOC_H
+
+#include <linux/of.h>
+#include <linux/linkage.h>
+#include <linux/types.h>
+
+#define SOC_EARLY_INIT_DECLARE(name, compat, fn)			\
+	static const struct of_device_id __soc_early_init__##name	\
+		__used __section(__soc_early_init_table)		\
+		 = { .compatible = compat, .data = fn  }
+
+void soc_early_init(void);
+
+extern unsigned long __soc_early_init_table_start;
+extern unsigned long __soc_early_init_table_end;
+
+#endif
diff --git a/arch/riscv/kernel/.gitignore b/arch/riscv/kernel/.gitignore
index b51634f..e052ed33 100644
--- a/arch/riscv/kernel/.gitignore
+++ b/arch/riscv/kernel/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 /vmlinux.lds
diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile
index f40205c..86c83081 100644
--- a/arch/riscv/kernel/Makefile
+++ b/arch/riscv/kernel/Makefile
@@ -4,12 +4,14 @@
 #
 
 ifdef CONFIG_FTRACE
-CFLAGS_REMOVE_ftrace.o = -pg
+CFLAGS_REMOVE_ftrace.o	= -pg
+CFLAGS_REMOVE_patch.o	= -pg
 endif
 
 extra-y += head.o
 extra-y += vmlinux.lds
 
+obj-y	+= soc.o
 obj-y	+= cpu.o
 obj-y	+= cpufeature.o
 obj-y	+= entry.o
@@ -26,12 +28,15 @@
 obj-y	+= riscv_ksyms.o
 obj-y	+= stacktrace.o
 obj-y	+= cacheinfo.o
+obj-y	+= patch.o
 obj-$(CONFIG_MMU) += vdso.o vdso/
 
-obj-$(CONFIG_RISCV_M_MODE)	+= clint.o
+obj-$(CONFIG_RISCV_M_MODE)	+= clint.o traps_misaligned.o
 obj-$(CONFIG_FPU)		+= fpu.o
 obj-$(CONFIG_SMP)		+= smpboot.o
 obj-$(CONFIG_SMP)		+= smp.o
+obj-$(CONFIG_SMP)		+= cpu_ops.o
+obj-$(CONFIG_SMP)		+= cpu_ops_spinwait.o
 obj-$(CONFIG_MODULES)		+= module.o
 obj-$(CONFIG_MODULE_SECTIONS)	+= module-sections.o
 
@@ -42,5 +47,9 @@
 obj-$(CONFIG_PERF_EVENTS)	+= perf_callchain.o
 obj-$(CONFIG_HAVE_PERF_REGS)	+= perf_regs.o
 obj-$(CONFIG_RISCV_SBI)		+= sbi.o
+ifeq ($(CONFIG_RISCV_SBI), y)
+obj-$(CONFIG_SMP) += cpu_ops_sbi.o
+endif
+obj-$(CONFIG_HOTPLUG_CPU)	+= cpu-hotplug.o
 
 clean:
diff --git a/arch/riscv/kernel/cpu-hotplug.c b/arch/riscv/kernel/cpu-hotplug.c
new file mode 100644
index 0000000..df84e0c
--- /dev/null
+++ b/arch/riscv/kernel/cpu-hotplug.c
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ */
+
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/err.h>
+#include <linux/irq.h>
+#include <linux/cpu.h>
+#include <linux/sched/hotplug.h>
+#include <asm/irq.h>
+#include <asm/cpu_ops.h>
+#include <asm/sbi.h>
+
+void cpu_stop(void);
+void arch_cpu_idle_dead(void)
+{
+	cpu_stop();
+}
+
+bool cpu_has_hotplug(unsigned int cpu)
+{
+	if (cpu_ops[cpu]->cpu_stop)
+		return true;
+
+	return false;
+}
+
+/*
+ * __cpu_disable runs on the processor to be shutdown.
+ */
+int __cpu_disable(void)
+{
+	int ret = 0;
+	unsigned int cpu = smp_processor_id();
+
+	if (!cpu_ops[cpu] || !cpu_ops[cpu]->cpu_stop)
+		return -EOPNOTSUPP;
+
+	if (cpu_ops[cpu]->cpu_disable)
+		ret = cpu_ops[cpu]->cpu_disable(cpu);
+
+	if (ret)
+		return ret;
+
+	remove_cpu_topology(cpu);
+	set_cpu_online(cpu, false);
+	irq_migrate_all_off_this_cpu();
+
+	return ret;
+}
+
+/*
+ * Called on the thread which is asking for a CPU to be shutdown.
+ */
+void __cpu_die(unsigned int cpu)
+{
+	int ret = 0;
+
+	if (!cpu_wait_death(cpu, 5)) {
+		pr_err("CPU %u: didn't die\n", cpu);
+		return;
+	}
+	pr_notice("CPU%u: off\n", cpu);
+
+	/* Verify from the firmware if the cpu is really stopped*/
+	if (cpu_ops[cpu]->cpu_is_stopped)
+		ret = cpu_ops[cpu]->cpu_is_stopped(cpu);
+	if (ret)
+		pr_warn("CPU%d may not have stopped: %d\n", cpu, ret);
+}
+
+/*
+ * Called from the idle thread for the CPU which has been shutdown.
+ */
+void cpu_stop(void)
+{
+	idle_task_exit();
+
+	(void)cpu_report_death();
+
+	cpu_ops[smp_processor_id()]->cpu_stop();
+	/* It should never reach here */
+	BUG();
+}
diff --git a/arch/riscv/kernel/cpu_ops.c b/arch/riscv/kernel/cpu_ops.c
new file mode 100644
index 0000000..c4c33bf
--- /dev/null
+++ b/arch/riscv/kernel/cpu_ops.c
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020 Western Digital Corporation or its affiliates.
+ */
+
+#include <linux/errno.h>
+#include <linux/mm.h>
+#include <linux/of.h>
+#include <linux/string.h>
+#include <linux/sched.h>
+#include <linux/sched/task_stack.h>
+#include <asm/cpu_ops.h>
+#include <asm/sbi.h>
+#include <asm/smp.h>
+
+const struct cpu_operations *cpu_ops[NR_CPUS] __ro_after_init;
+
+void *__cpu_up_stack_pointer[NR_CPUS];
+void *__cpu_up_task_pointer[NR_CPUS];
+
+extern const struct cpu_operations cpu_ops_sbi;
+extern const struct cpu_operations cpu_ops_spinwait;
+
+void cpu_update_secondary_bootdata(unsigned int cpuid,
+				   struct task_struct *tidle)
+{
+	int hartid = cpuid_to_hartid_map(cpuid);
+
+	/* Make sure tidle is updated */
+	smp_mb();
+	WRITE_ONCE(__cpu_up_stack_pointer[hartid],
+		   task_stack_page(tidle) + THREAD_SIZE);
+	WRITE_ONCE(__cpu_up_task_pointer[hartid], tidle);
+}
+
+void __init cpu_set_ops(int cpuid)
+{
+#if IS_ENABLED(CONFIG_RISCV_SBI)
+	if (sbi_probe_extension(SBI_EXT_HSM) > 0) {
+		if (!cpuid)
+			pr_info("SBI v0.2 HSM extension detected\n");
+		cpu_ops[cpuid] = &cpu_ops_sbi;
+	} else
+#endif
+		cpu_ops[cpuid] = &cpu_ops_spinwait;
+}
diff --git a/arch/riscv/kernel/cpu_ops_sbi.c b/arch/riscv/kernel/cpu_ops_sbi.c
new file mode 100644
index 0000000..685fae7
--- /dev/null
+++ b/arch/riscv/kernel/cpu_ops_sbi.c
@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * HSM extension and cpu_ops implementation.
+ *
+ * Copyright (c) 2020 Western Digital Corporation or its affiliates.
+ */
+
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <asm/cpu_ops.h>
+#include <asm/sbi.h>
+#include <asm/smp.h>
+
+extern char secondary_start_sbi[];
+const struct cpu_operations cpu_ops_sbi;
+
+static int sbi_hsm_hart_start(unsigned long hartid, unsigned long saddr,
+			      unsigned long priv)
+{
+	struct sbiret ret;
+
+	ret = sbi_ecall(SBI_EXT_HSM, SBI_EXT_HSM_HART_START,
+			hartid, saddr, priv, 0, 0, 0);
+	if (ret.error)
+		return sbi_err_map_linux_errno(ret.error);
+	else
+		return 0;
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+static int sbi_hsm_hart_stop(void)
+{
+	struct sbiret ret;
+
+	ret = sbi_ecall(SBI_EXT_HSM, SBI_EXT_HSM_HART_STOP, 0, 0, 0, 0, 0, 0);
+
+	if (ret.error)
+		return sbi_err_map_linux_errno(ret.error);
+	else
+		return 0;
+}
+
+static int sbi_hsm_hart_get_status(unsigned long hartid)
+{
+	struct sbiret ret;
+
+	ret = sbi_ecall(SBI_EXT_HSM, SBI_EXT_HSM_HART_STATUS,
+			hartid, 0, 0, 0, 0, 0);
+	if (ret.error)
+		return sbi_err_map_linux_errno(ret.error);
+	else
+		return ret.value;
+}
+#endif
+
+static int sbi_cpu_start(unsigned int cpuid, struct task_struct *tidle)
+{
+	int rc;
+	unsigned long boot_addr = __pa_symbol(secondary_start_sbi);
+	int hartid = cpuid_to_hartid_map(cpuid);
+
+	cpu_update_secondary_bootdata(cpuid, tidle);
+	rc = sbi_hsm_hart_start(hartid, boot_addr, 0);
+
+	return rc;
+}
+
+static int sbi_cpu_prepare(unsigned int cpuid)
+{
+	if (!cpu_ops_sbi.cpu_start) {
+		pr_err("cpu start method not defined for CPU [%d]\n", cpuid);
+		return -ENODEV;
+	}
+	return 0;
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+static int sbi_cpu_disable(unsigned int cpuid)
+{
+	if (!cpu_ops_sbi.cpu_stop)
+		return -EOPNOTSUPP;
+	return 0;
+}
+
+static void sbi_cpu_stop(void)
+{
+	int ret;
+
+	ret = sbi_hsm_hart_stop();
+	pr_crit("Unable to stop the cpu %u (%d)\n", smp_processor_id(), ret);
+}
+
+static int sbi_cpu_is_stopped(unsigned int cpuid)
+{
+	int rc;
+	int hartid = cpuid_to_hartid_map(cpuid);
+
+	rc = sbi_hsm_hart_get_status(hartid);
+
+	if (rc == SBI_HSM_HART_STATUS_STOPPED)
+		return 0;
+	return rc;
+}
+#endif
+
+const struct cpu_operations cpu_ops_sbi = {
+	.name		= "sbi",
+	.cpu_prepare	= sbi_cpu_prepare,
+	.cpu_start	= sbi_cpu_start,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_disable	= sbi_cpu_disable,
+	.cpu_stop	= sbi_cpu_stop,
+	.cpu_is_stopped	= sbi_cpu_is_stopped,
+#endif
+};
diff --git a/arch/riscv/kernel/cpu_ops_spinwait.c b/arch/riscv/kernel/cpu_ops_spinwait.c
new file mode 100644
index 0000000..b2c957b
--- /dev/null
+++ b/arch/riscv/kernel/cpu_ops_spinwait.c
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020 Western Digital Corporation or its affiliates.
+ */
+
+#include <linux/errno.h>
+#include <linux/of.h>
+#include <linux/string.h>
+#include <asm/cpu_ops.h>
+#include <asm/sbi.h>
+#include <asm/smp.h>
+
+const struct cpu_operations cpu_ops_spinwait;
+
+static int spinwait_cpu_prepare(unsigned int cpuid)
+{
+	if (!cpu_ops_spinwait.cpu_start) {
+		pr_err("cpu start method not defined for CPU [%d]\n", cpuid);
+		return -ENODEV;
+	}
+	return 0;
+}
+
+static int spinwait_cpu_start(unsigned int cpuid, struct task_struct *tidle)
+{
+	/*
+	 * In this protocol, all cpus boot on their own accord.  _start
+	 * selects the first cpu to boot the kernel and causes the remainder
+	 * of the cpus to spin in a loop waiting for their stack pointer to be
+	 * setup by that main cpu.  Writing to bootdata
+	 * (i.e __cpu_up_stack_pointer) signals to the spinning cpus that they
+	 * can continue the boot process.
+	 */
+	cpu_update_secondary_bootdata(cpuid, tidle);
+
+	return 0;
+}
+
+const struct cpu_operations cpu_ops_spinwait = {
+	.name		= "spinwait",
+	.cpu_prepare	= spinwait_cpu_prepare,
+	.cpu_start	= spinwait_cpu_start,
+};
diff --git a/arch/riscv/kernel/entry.S b/arch/riscv/kernel/entry.S
index 208702d..56d071b 100644
--- a/arch/riscv/kernel/entry.S
+++ b/arch/riscv/kernel/entry.S
@@ -13,17 +13,11 @@
 #include <asm/thread_info.h>
 #include <asm/asm-offsets.h>
 
-	.text
-	.altmacro
+#if !IS_ENABLED(CONFIG_PREEMPTION)
+.set resume_kernel, restore_all
+#endif
 
-/*
- * Prepares to enter a system call or exception by saving all registers to the
- * stack.
- */
-	.macro SAVE_ALL
-	LOCAL _restore_kernel_tpsp
-	LOCAL _save_context
-
+ENTRY(handle_exception)
 	/*
 	 * If coming from userspace, preserve the user thread pointer and load
 	 * the kernel thread pointer.  If we came from the kernel, the scratch
@@ -90,77 +84,6 @@
 	REG_S s3, PT_BADADDR(sp)
 	REG_S s4, PT_CAUSE(sp)
 	REG_S s5, PT_TP(sp)
-	.endm
-
-/*
- * Prepares to return from a system call or exception by restoring all
- * registers from the stack.
- */
-	.macro RESTORE_ALL
-	REG_L a0, PT_STATUS(sp)
-	/*
-	 * The current load reservation is effectively part of the processor's
-	 * state, in the sense that load reservations cannot be shared between
-	 * different hart contexts.  We can't actually save and restore a load
-	 * reservation, so instead here we clear any existing reservation --
-	 * it's always legal for implementations to clear load reservations at
-	 * any point (as long as the forward progress guarantee is kept, but
-	 * we'll ignore that here).
-	 *
-	 * Dangling load reservations can be the result of taking a trap in the
-	 * middle of an LR/SC sequence, but can also be the result of a taken
-	 * forward branch around an SC -- which is how we implement CAS.  As a
-	 * result we need to clear reservations between the last CAS and the
-	 * jump back to the new context.  While it is unlikely the store
-	 * completes, implementations are allowed to expand reservations to be
-	 * arbitrarily large.
-	 */
-	REG_L  a2, PT_EPC(sp)
-	REG_SC x0, a2, PT_EPC(sp)
-
-	csrw CSR_STATUS, a0
-	csrw CSR_EPC, a2
-
-	REG_L x1,  PT_RA(sp)
-	REG_L x3,  PT_GP(sp)
-	REG_L x4,  PT_TP(sp)
-	REG_L x5,  PT_T0(sp)
-	REG_L x6,  PT_T1(sp)
-	REG_L x7,  PT_T2(sp)
-	REG_L x8,  PT_S0(sp)
-	REG_L x9,  PT_S1(sp)
-	REG_L x10, PT_A0(sp)
-	REG_L x11, PT_A1(sp)
-	REG_L x12, PT_A2(sp)
-	REG_L x13, PT_A3(sp)
-	REG_L x14, PT_A4(sp)
-	REG_L x15, PT_A5(sp)
-	REG_L x16, PT_A6(sp)
-	REG_L x17, PT_A7(sp)
-	REG_L x18, PT_S2(sp)
-	REG_L x19, PT_S3(sp)
-	REG_L x20, PT_S4(sp)
-	REG_L x21, PT_S5(sp)
-	REG_L x22, PT_S6(sp)
-	REG_L x23, PT_S7(sp)
-	REG_L x24, PT_S8(sp)
-	REG_L x25, PT_S9(sp)
-	REG_L x26, PT_S10(sp)
-	REG_L x27, PT_S11(sp)
-	REG_L x28, PT_T3(sp)
-	REG_L x29, PT_T4(sp)
-	REG_L x30, PT_T5(sp)
-	REG_L x31, PT_T6(sp)
-
-	REG_L x2,  PT_SP(sp)
-	.endm
-
-#if !IS_ENABLED(CONFIG_PREEMPTION)
-.set resume_kernel, restore_all
-#endif
-
-ENTRY(handle_exception)
-	SAVE_ALL
 
 	/*
 	 * Set the scratch register to 0, so that if a recursive exception
@@ -291,7 +214,63 @@
 	csrw CSR_SCRATCH, tp
 
 restore_all:
-	RESTORE_ALL
+	REG_L a0, PT_STATUS(sp)
+	/*
+	 * The current load reservation is effectively part of the processor's
+	 * state, in the sense that load reservations cannot be shared between
+	 * different hart contexts.  We can't actually save and restore a load
+	 * reservation, so instead here we clear any existing reservation --
+	 * it's always legal for implementations to clear load reservations at
+	 * any point (as long as the forward progress guarantee is kept, but
+	 * we'll ignore that here).
+	 *
+	 * Dangling load reservations can be the result of taking a trap in the
+	 * middle of an LR/SC sequence, but can also be the result of a taken
+	 * forward branch around an SC -- which is how we implement CAS.  As a
+	 * result we need to clear reservations between the last CAS and the
+	 * jump back to the new context.  While it is unlikely the store
+	 * completes, implementations are allowed to expand reservations to be
+	 * arbitrarily large.
+	 */
+	REG_L  a2, PT_EPC(sp)
+	REG_SC x0, a2, PT_EPC(sp)
+
+	csrw CSR_STATUS, a0
+	csrw CSR_EPC, a2
+
+	REG_L x1,  PT_RA(sp)
+	REG_L x3,  PT_GP(sp)
+	REG_L x4,  PT_TP(sp)
+	REG_L x5,  PT_T0(sp)
+	REG_L x6,  PT_T1(sp)
+	REG_L x7,  PT_T2(sp)
+	REG_L x8,  PT_S0(sp)
+	REG_L x9,  PT_S1(sp)
+	REG_L x10, PT_A0(sp)
+	REG_L x11, PT_A1(sp)
+	REG_L x12, PT_A2(sp)
+	REG_L x13, PT_A3(sp)
+	REG_L x14, PT_A4(sp)
+	REG_L x15, PT_A5(sp)
+	REG_L x16, PT_A6(sp)
+	REG_L x17, PT_A7(sp)
+	REG_L x18, PT_S2(sp)
+	REG_L x19, PT_S3(sp)
+	REG_L x20, PT_S4(sp)
+	REG_L x21, PT_S5(sp)
+	REG_L x22, PT_S6(sp)
+	REG_L x23, PT_S7(sp)
+	REG_L x24, PT_S8(sp)
+	REG_L x25, PT_S9(sp)
+	REG_L x26, PT_S10(sp)
+	REG_L x27, PT_S11(sp)
+	REG_L x28, PT_T3(sp)
+	REG_L x29, PT_T4(sp)
+	REG_L x30, PT_T5(sp)
+	REG_L x31, PT_T6(sp)
+
+	REG_L x2,  PT_SP(sp)
+
 #ifdef CONFIG_RISCV_M_MODE
 	mret
 #else
diff --git a/arch/riscv/kernel/ftrace.c b/arch/riscv/kernel/ftrace.c
index c40fdcd..ce69b34 100644
--- a/arch/riscv/kernel/ftrace.c
+++ b/arch/riscv/kernel/ftrace.c
@@ -8,6 +8,7 @@
 #include <linux/ftrace.h>
 #include <linux/uaccess.h>
 #include <asm/cacheflush.h>
+#include <asm/patch.h>
 
 #ifdef CONFIG_DYNAMIC_FTRACE
 static int ftrace_check_current_call(unsigned long hook_pos,
@@ -46,20 +47,14 @@ static int __ftrace_modify_call(unsigned long hook_pos, unsigned long target,
 {
 	unsigned int call[2];
 	unsigned int nops[2] = {NOP4, NOP4};
-	int ret = 0;
 
 	make_call(hook_pos, target, call);
 
-	/* replace the auipc-jalr pair at once */
-	ret = probe_kernel_write((void *)hook_pos, enable ? call : nops,
-				 MCOUNT_INSN_SIZE);
-	/* return must be -EPERM on write error */
-	if (ret)
+	/* Replace the auipc-jalr pair at once. Return -EPERM on write error. */
+	if (riscv_patch_text_nosync
+	    ((void *)hook_pos, enable ? call : nops, MCOUNT_INSN_SIZE))
 		return -EPERM;
 
-	smp_mb();
-	flush_icache_range((void *)hook_pos, (void *)hook_pos + MCOUNT_INSN_SIZE);
-
 	return 0;
 }
 
diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
index 85f2073..98a4064 100644
--- a/arch/riscv/kernel/head.S
+++ b/arch/riscv/kernel/head.S
@@ -14,7 +14,7 @@
 #include <asm/hwcap.h>
 #include <asm/image.h>
 
-__INIT
+__HEAD
 ENTRY(_start)
 	/*
 	 * Image header expected by Linux boot-loaders. The image header data
@@ -45,8 +45,111 @@
 	.ascii RISCV_IMAGE_MAGIC2
 	.word 0
 
-.global _start_kernel
-_start_kernel:
+.align 2
+#ifdef CONFIG_MMU
+relocate:
+	/* Relocate return address */
+	li a1, PAGE_OFFSET
+	la a2, _start
+	sub a1, a1, a2
+	add ra, ra, a1
+
+	/* Point stvec to virtual address of intruction after satp write */
+	la a2, 1f
+	add a2, a2, a1
+	csrw CSR_TVEC, a2
+
+	/* Compute satp for kernel page tables, but don't load it yet */
+	srl a2, a0, PAGE_SHIFT
+	li a1, SATP_MODE
+	or a2, a2, a1
+
+	/*
+	 * Load trampoline page directory, which will cause us to trap to
+	 * stvec if VA != PA, or simply fall through if VA == PA.  We need a
+	 * full fence here because setup_vm() just wrote these PTEs and we need
+	 * to ensure the new translations are in use.
+	 */
+	la a0, trampoline_pg_dir
+	srl a0, a0, PAGE_SHIFT
+	or a0, a0, a1
+	sfence.vma
+	csrw CSR_SATP, a0
+.align 2
+1:
+	/* Set trap vector to spin forever to help debug */
+	la a0, .Lsecondary_park
+	csrw CSR_TVEC, a0
+
+	/* Reload the global pointer */
+.option push
+.option norelax
+	la gp, __global_pointer$
+.option pop
+
+	/*
+	 * Switch to kernel page tables.  A full fence is necessary in order to
+	 * avoid using the trampoline translations, which are only correct for
+	 * the first superpage.  Fetching the fence is guarnteed to work
+	 * because that first superpage is translated the same way.
+	 */
+	csrw CSR_SATP, a2
+	sfence.vma
+
+	ret
+#endif /* CONFIG_MMU */
+#ifdef CONFIG_SMP
+	.global secondary_start_sbi
+secondary_start_sbi:
+	/* Mask all interrupts */
+	csrw CSR_IE, zero
+	csrw CSR_IP, zero
+
+	/* Load the global pointer */
+	.option push
+	.option norelax
+		la gp, __global_pointer$
+	.option pop
+
+	/*
+	 * Disable FPU to detect illegal usage of
+	 * floating point in kernel space
+	 */
+	li t0, SR_FS
+	csrc CSR_STATUS, t0
+
+	/* Set trap vector to spin forever to help debug */
+	la a3, .Lsecondary_park
+	csrw CSR_TVEC, a3
+
+	slli a3, a0, LGREG
+	la a4, __cpu_up_stack_pointer
+	la a5, __cpu_up_task_pointer
+	add a4, a3, a4
+	add a5, a3, a5
+	REG_L sp, (a4)
+	REG_L tp, (a5)
+
+	.global secondary_start_common
+secondary_start_common:
+
+#ifdef CONFIG_MMU
+	/* Enable virtual memory and relocate to virtual address */
+	la a0, swapper_pg_dir
+	call relocate
+#endif
+	tail smp_callin
+#endif /* CONFIG_SMP */
+
+.Lsecondary_park:
+	/* We lack SMP support or have too many harts, so park this hart */
+	wfi
+	j .Lsecondary_park
+
+END(_start)
+
+	__INIT
+ENTRY(_start_kernel)
 	/* Mask all interrupts */
 	csrw CSR_IE, zero
 	csrw CSR_IP, zero
@@ -131,62 +234,10 @@
 	call kasan_early_init
 #endif
 	/* Start the kernel */
+	call soc_early_init
 	call parse_dtb
 	tail start_kernel
 
-#ifdef CONFIG_MMU
-relocate:
-	/* Relocate return address */
-	li a1, PAGE_OFFSET
-	la a2, _start
-	sub a1, a1, a2
-	add ra, ra, a1
-
-	/* Point stvec to virtual address of intruction after satp write */
-	la a2, 1f
-	add a2, a2, a1
-	csrw CSR_TVEC, a2
-
-	/* Compute satp for kernel page tables, but don't load it yet */
-	srl a2, a0, PAGE_SHIFT
-	li a1, SATP_MODE
-	or a2, a2, a1
-
-	/*
-	 * Load trampoline page directory, which will cause us to trap to
-	 * stvec if VA != PA, or simply fall through if VA == PA.  We need a
-	 * full fence here because setup_vm() just wrote these PTEs and we need
-	 * to ensure the new translations are in use.
-	 */
-	la a0, trampoline_pg_dir
-	srl a0, a0, PAGE_SHIFT
-	or a0, a0, a1
-	sfence.vma
-	csrw CSR_SATP, a0
-.align 2
-1:
-	/* Set trap vector to spin forever to help debug */
-	la a0, .Lsecondary_park
-	csrw CSR_TVEC, a0
-
-	/* Reload the global pointer */
-.option push
-.option norelax
-	la gp, __global_pointer$
-.option pop
-
-	/*
-	 * Switch to kernel page tables.  A full fence is necessary in order to
-	 * avoid using the trampoline translations, which are only correct for
-	 * the first superpage.  Fetching the fence is guarnteed to work
-	 * because that first superpage is translated the same way.
-	 */
-	csrw CSR_SATP, a2
-	sfence.vma
-
-	ret
-#endif /* CONFIG_MMU */
-
 .Lsecondary_start:
 #ifdef CONFIG_SMP
 	/* Set trap vector to spin forever to help debug */
@@ -211,16 +262,10 @@
 	beqz tp, .Lwait_for_cpu_up
 	fence
 
-#ifdef CONFIG_MMU
-	/* Enable virtual memory and relocate to virtual address */
-	la a0, swapper_pg_dir
-	call relocate
+	tail secondary_start_common
 #endif
 
-	tail smp_callin
-#endif
-
-END(_start)
+END(_start_kernel)
 
 #ifdef CONFIG_RISCV_M_MODE
 ENTRY(reset_regs)
@@ -301,13 +346,6 @@
 END(reset_regs)
 #endif /* CONFIG_RISCV_M_MODE */
 
-.section ".text", "ax",@progbits
-.align 2
-.Lsecondary_park:
-	/* We lack SMP support or have too many harts, so park this hart */
-	wfi
-	j .Lsecondary_park
-
 __PAGE_ALIGNED_BSS
 	/* Empty zero page */
 	.balign PAGE_SIZE
diff --git a/arch/riscv/kernel/patch.c b/arch/riscv/kernel/patch.c
new file mode 100644
index 0000000..8a4fc65
--- /dev/null
+++ b/arch/riscv/kernel/patch.c
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 SiFive
+ */
+
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/uaccess.h>
+#include <linux/stop_machine.h>
+#include <asm/kprobes.h>
+#include <asm/cacheflush.h>
+#include <asm/fixmap.h>
+
+struct riscv_insn_patch {
+	void *addr;
+	u32 insn;
+	atomic_t cpu_count;
+};
+
+#ifdef CONFIG_MMU
+static DEFINE_RAW_SPINLOCK(patch_lock);
+
+static void __kprobes *patch_map(void *addr, int fixmap)
+{
+	uintptr_t uintaddr = (uintptr_t) addr;
+	struct page *page;
+
+	if (core_kernel_text(uintaddr))
+		page = phys_to_page(__pa_symbol(addr));
+	else if (IS_ENABLED(CONFIG_STRICT_MODULE_RWX))
+		page = vmalloc_to_page(addr);
+	else
+		return addr;
+
+	BUG_ON(!page);
+
+	return (void *)set_fixmap_offset(fixmap, page_to_phys(page) +
+					 (uintaddr & ~PAGE_MASK));
+}
+
+static void __kprobes patch_unmap(int fixmap)
+{
+	clear_fixmap(fixmap);
+}
+
+static int __kprobes riscv_insn_write(void *addr, const void *insn, size_t len)
+{
+	void *waddr = addr;
+	bool across_pages = (((uintptr_t) addr & ~PAGE_MASK) + len) > PAGE_SIZE;
+	unsigned long flags = 0;
+	int ret;
+
+	raw_spin_lock_irqsave(&patch_lock, flags);
+
+	if (across_pages)
+		patch_map(addr + len, FIX_TEXT_POKE1);
+
+	waddr = patch_map(addr, FIX_TEXT_POKE0);
+
+	ret = probe_kernel_write(waddr, insn, len);
+
+	patch_unmap(FIX_TEXT_POKE0);
+
+	if (across_pages)
+		patch_unmap(FIX_TEXT_POKE1);
+
+	raw_spin_unlock_irqrestore(&patch_lock, flags);
+
+	return ret;
+}
+#else
+static int __kprobes riscv_insn_write(void *addr, const void *insn, size_t len)
+{
+	return probe_kernel_write(addr, insn, len);
+}
+#endif /* CONFIG_MMU */
+
+int __kprobes riscv_patch_text_nosync(void *addr, const void *insns, size_t len)
+{
+	u32 *tp = addr;
+	int ret;
+
+	ret = riscv_insn_write(tp, insns, len);
+
+	if (!ret)
+		flush_icache_range((uintptr_t) tp, (uintptr_t) tp + len);
+
+	return ret;
+}
+
+static int __kprobes riscv_patch_text_cb(void *data)
+{
+	struct riscv_insn_patch *patch = data;
+	int ret = 0;
+
+	if (atomic_inc_return(&patch->cpu_count) == 1) {
+		ret =
+		    riscv_patch_text_nosync(patch->addr, &patch->insn,
+					    GET_INSN_LENGTH(patch->insn));
+		atomic_inc(&patch->cpu_count);
+	} else {
+		while (atomic_read(&patch->cpu_count) <= num_online_cpus())
+			cpu_relax();
+		smp_mb();
+	}
+
+	return ret;
+}
+
+int __kprobes riscv_patch_text(void *addr, u32 insn)
+{
+	struct riscv_insn_patch patch = {
+		.addr = addr,
+		.insn = insn,
+		.cpu_count = ATOMIC_INIT(0),
+	};
+
+	return stop_machine_cpuslocked(riscv_patch_text_cb,
+				       &patch, cpu_online_mask);
+}
diff --git a/arch/riscv/kernel/process.c b/arch/riscv/kernel/process.c
index 817cf7b..610c11e 100644
--- a/arch/riscv/kernel/process.c
+++ b/arch/riscv/kernel/process.c
@@ -22,6 +22,8 @@
 #include <asm/switch_to.h>
 #include <asm/thread_info.h>
 
+unsigned long gp_in_global __asm__("gp");
+
 extern asmlinkage void ret_from_fork(void);
 extern asmlinkage void ret_from_kernel_thread(void);
 
@@ -107,9 +109,8 @@ int copy_thread_tls(unsigned long clone_flags, unsigned long usp,
 	/* p->thread holds context to be restored by __switch_to() */
 	if (unlikely(p->flags & PF_KTHREAD)) {
 		/* Kernel thread */
-		const register unsigned long gp __asm__ ("gp");
 		memset(childregs, 0, sizeof(struct pt_regs));
-		childregs->gp = gp;
+		childregs->gp = gp_in_global;
 		/* Supervisor/Machine, irqs on: */
 		childregs->status = SR_PP | SR_PIE;
 
diff --git a/arch/riscv/kernel/sbi.c b/arch/riscv/kernel/sbi.c
index f6c7c3e8..7c24da5 100644
--- a/arch/riscv/kernel/sbi.c
+++ b/arch/riscv/kernel/sbi.c
@@ -1,17 +1,588 @@
 // SPDX-License-Identifier: GPL-2.0-only
+/*
+ * SBI initialilization and all extension implementation.
+ *
+ * Copyright (c) 2020 Western Digital Corporation or its affiliates.
+ */
 
 #include <linux/init.h>
 #include <linux/pm.h>
 #include <asm/sbi.h>
+#include <asm/smp.h>
+
+/* default SBI version is 0.1 */
+unsigned long sbi_spec_version = SBI_SPEC_VERSION_DEFAULT;
+EXPORT_SYMBOL(sbi_spec_version);
+
+static void (*__sbi_set_timer)(uint64_t stime);
+static int (*__sbi_send_ipi)(const unsigned long *hart_mask);
+static int (*__sbi_rfence)(int fid, const unsigned long *hart_mask,
+			   unsigned long start, unsigned long size,
+			   unsigned long arg4, unsigned long arg5);
+
+struct sbiret sbi_ecall(int ext, int fid, unsigned long arg0,
+			unsigned long arg1, unsigned long arg2,
+			unsigned long arg3, unsigned long arg4,
+			unsigned long arg5)
+{
+	struct sbiret ret;
+
+	register uintptr_t a0 asm ("a0") = (uintptr_t)(arg0);
+	register uintptr_t a1 asm ("a1") = (uintptr_t)(arg1);
+	register uintptr_t a2 asm ("a2") = (uintptr_t)(arg2);
+	register uintptr_t a3 asm ("a3") = (uintptr_t)(arg3);
+	register uintptr_t a4 asm ("a4") = (uintptr_t)(arg4);
+	register uintptr_t a5 asm ("a5") = (uintptr_t)(arg5);
+	register uintptr_t a6 asm ("a6") = (uintptr_t)(fid);
+	register uintptr_t a7 asm ("a7") = (uintptr_t)(ext);
+	asm volatile ("ecall"
+		      : "+r" (a0), "+r" (a1)
+		      : "r" (a2), "r" (a3), "r" (a4), "r" (a5), "r" (a6), "r" (a7)
+		      : "memory");
+	ret.error = a0;
+	ret.value = a1;
+
+	return ret;
+}
+EXPORT_SYMBOL(sbi_ecall);
+
+int sbi_err_map_linux_errno(int err)
+{
+	switch (err) {
+	case SBI_SUCCESS:
+		return 0;
+	case SBI_ERR_DENIED:
+		return -EPERM;
+	case SBI_ERR_INVALID_PARAM:
+		return -EINVAL;
+	case SBI_ERR_INVALID_ADDRESS:
+		return -EFAULT;
+	case SBI_ERR_NOT_SUPPORTED:
+	case SBI_ERR_FAILURE:
+	default:
+		return -ENOTSUPP;
+	};
+}
+EXPORT_SYMBOL(sbi_err_map_linux_errno);
+
+#ifdef CONFIG_RISCV_SBI_V01
+/**
+ * sbi_console_putchar() - Writes given character to the console device.
+ * @ch: The data to be written to the console.
+ *
+ * Return: None
+ */
+void sbi_console_putchar(int ch)
+{
+	sbi_ecall(SBI_EXT_0_1_CONSOLE_PUTCHAR, 0, ch, 0, 0, 0, 0, 0);
+}
+EXPORT_SYMBOL(sbi_console_putchar);
+
+/**
+ * sbi_console_getchar() - Reads a byte from console device.
+ *
+ * Returns the value read from console.
+ */
+int sbi_console_getchar(void)
+{
+	struct sbiret ret;
+
+	ret = sbi_ecall(SBI_EXT_0_1_CONSOLE_GETCHAR, 0, 0, 0, 0, 0, 0, 0);
+
+	return ret.error;
+}
+EXPORT_SYMBOL(sbi_console_getchar);
+
+/**
+ * sbi_shutdown() - Remove all the harts from executing supervisor code.
+ *
+ * Return: None
+ */
+void sbi_shutdown(void)
+{
+	sbi_ecall(SBI_EXT_0_1_SHUTDOWN, 0, 0, 0, 0, 0, 0, 0);
+}
+EXPORT_SYMBOL(sbi_set_timer);
+
+/**
+ * sbi_clear_ipi() - Clear any pending IPIs for the calling hart.
+ *
+ * Return: None
+ */
+void sbi_clear_ipi(void)
+{
+	sbi_ecall(SBI_EXT_0_1_CLEAR_IPI, 0, 0, 0, 0, 0, 0, 0);
+}
+EXPORT_SYMBOL(sbi_shutdown);
+
+/**
+ * sbi_set_timer_v01() - Program the timer for next timer event.
+ * @stime_value: The value after which next timer event should fire.
+ *
+ * Return: None
+ */
+static void __sbi_set_timer_v01(uint64_t stime_value)
+{
+#if __riscv_xlen == 32
+	sbi_ecall(SBI_EXT_0_1_SET_TIMER, 0, stime_value,
+		  stime_value >> 32, 0, 0, 0, 0);
+#else
+	sbi_ecall(SBI_EXT_0_1_SET_TIMER, 0, stime_value, 0, 0, 0, 0, 0);
+#endif
+}
+
+static int __sbi_send_ipi_v01(const unsigned long *hart_mask)
+{
+	sbi_ecall(SBI_EXT_0_1_SEND_IPI, 0, (unsigned long)hart_mask,
+		  0, 0, 0, 0, 0);
+	return 0;
+}
+
+static int __sbi_rfence_v01(int fid, const unsigned long *hart_mask,
+			    unsigned long start, unsigned long size,
+			    unsigned long arg4, unsigned long arg5)
+{
+	int result = 0;
+
+	/* v0.2 function IDs are equivalent to v0.1 extension IDs */
+	switch (fid) {
+	case SBI_EXT_RFENCE_REMOTE_FENCE_I:
+		sbi_ecall(SBI_EXT_0_1_REMOTE_FENCE_I, 0,
+			  (unsigned long)hart_mask, 0, 0, 0, 0, 0);
+		break;
+	case SBI_EXT_RFENCE_REMOTE_SFENCE_VMA:
+		sbi_ecall(SBI_EXT_0_1_REMOTE_SFENCE_VMA, 0,
+			  (unsigned long)hart_mask, start, size,
+			  0, 0, 0);
+		break;
+	case SBI_EXT_RFENCE_REMOTE_SFENCE_VMA_ASID:
+		sbi_ecall(SBI_EXT_0_1_REMOTE_SFENCE_VMA_ASID, 0,
+			  (unsigned long)hart_mask, start, size,
+			  arg4, 0, 0);
+		break;
+	default:
+		pr_err("SBI call [%d]not supported in SBI v0.1\n", fid);
+		result = -EINVAL;
+	}
+
+	return result;
+}
+#else
+static void __sbi_set_timer_v01(uint64_t stime_value)
+{
+	pr_warn("Timer extension is not available in SBI v%lu.%lu\n",
+		sbi_major_version(), sbi_minor_version());
+}
+
+static int __sbi_send_ipi_v01(const unsigned long *hart_mask)
+{
+	pr_warn("IPI extension is not available in SBI v%lu.%lu\n",
+		sbi_major_version(), sbi_minor_version());
+
+	return 0;
+}
+
+static int __sbi_rfence_v01(int fid, const unsigned long *hart_mask,
+			    unsigned long start, unsigned long size,
+			    unsigned long arg4, unsigned long arg5)
+{
+	pr_warn("remote fence extension is not available in SBI v%lu.%lu\n",
+		sbi_major_version(), sbi_minor_version());
+
+	return 0;
+}
+#endif /* CONFIG_RISCV_SBI_V01 */
+
+static void __sbi_set_timer_v02(uint64_t stime_value)
+{
+#if __riscv_xlen == 32
+	sbi_ecall(SBI_EXT_TIME, SBI_EXT_TIME_SET_TIMER, stime_value,
+		  stime_value >> 32, 0, 0, 0, 0);
+#else
+	sbi_ecall(SBI_EXT_TIME, SBI_EXT_TIME_SET_TIMER, stime_value, 0,
+		  0, 0, 0, 0);
+#endif
+}
+
+static int __sbi_send_ipi_v02(const unsigned long *hart_mask)
+{
+	unsigned long hartid, hmask_val, hbase;
+	struct cpumask tmask;
+	struct sbiret ret = {0};
+	int result;
+
+	if (!hart_mask || !(*hart_mask)) {
+		riscv_cpuid_to_hartid_mask(cpu_online_mask, &tmask);
+		hart_mask = cpumask_bits(&tmask);
+	}
+
+	hmask_val = 0;
+	hbase = 0;
+	for_each_set_bit(hartid, hart_mask, NR_CPUS) {
+		if (hmask_val && ((hbase + BITS_PER_LONG) <= hartid)) {
+			ret = sbi_ecall(SBI_EXT_IPI, SBI_EXT_IPI_SEND_IPI,
+					hmask_val, hbase, 0, 0, 0, 0);
+			if (ret.error)
+				goto ecall_failed;
+			hmask_val = 0;
+			hbase = 0;
+		}
+		if (!hmask_val)
+			hbase = hartid;
+		hmask_val |= 1UL << (hartid - hbase);
+	}
+
+	if (hmask_val) {
+		ret = sbi_ecall(SBI_EXT_IPI, SBI_EXT_IPI_SEND_IPI,
+				hmask_val, hbase, 0, 0, 0, 0);
+		if (ret.error)
+			goto ecall_failed;
+	}
+
+	return 0;
+
+ecall_failed:
+	result = sbi_err_map_linux_errno(ret.error);
+	pr_err("%s: hbase = [%lu] hmask = [0x%lx] failed (error [%d])\n",
+	       __func__, hbase, hmask_val, result);
+	return result;
+}
+
+static int __sbi_rfence_v02_call(unsigned long fid, unsigned long hmask_val,
+				 unsigned long hbase, unsigned long start,
+				 unsigned long size, unsigned long arg4,
+				 unsigned long arg5)
+{
+	struct sbiret ret = {0};
+	int ext = SBI_EXT_RFENCE;
+	int result = 0;
+
+	switch (fid) {
+	case SBI_EXT_RFENCE_REMOTE_FENCE_I:
+		ret = sbi_ecall(ext, fid, hmask_val, hbase, 0, 0, 0, 0);
+		break;
+	case SBI_EXT_RFENCE_REMOTE_SFENCE_VMA:
+		ret = sbi_ecall(ext, fid, hmask_val, hbase, start,
+				size, 0, 0);
+		break;
+	case SBI_EXT_RFENCE_REMOTE_SFENCE_VMA_ASID:
+		ret = sbi_ecall(ext, fid, hmask_val, hbase, start,
+				size, arg4, 0);
+		break;
+
+	case SBI_EXT_RFENCE_REMOTE_HFENCE_GVMA:
+		ret = sbi_ecall(ext, fid, hmask_val, hbase, start,
+				size, 0, 0);
+		break;
+	case SBI_EXT_RFENCE_REMOTE_HFENCE_GVMA_VMID:
+		ret = sbi_ecall(ext, fid, hmask_val, hbase, start,
+				size, arg4, 0);
+		break;
+	case SBI_EXT_RFENCE_REMOTE_HFENCE_VVMA:
+		ret = sbi_ecall(ext, fid, hmask_val, hbase, start,
+				size, 0, 0);
+		break;
+	case SBI_EXT_RFENCE_REMOTE_HFENCE_VVMA_ASID:
+		ret = sbi_ecall(ext, fid, hmask_val, hbase, start,
+				size, arg4, 0);
+		break;
+	default:
+		pr_err("unknown function ID [%lu] for SBI extension [%d]\n",
+		       fid, ext);
+		result = -EINVAL;
+	}
+
+	if (ret.error) {
+		result = sbi_err_map_linux_errno(ret.error);
+		pr_err("%s: hbase = [%lu] hmask = [0x%lx] failed (error [%d])\n",
+		       __func__, hbase, hmask_val, result);
+	}
+
+	return result;
+}
+
+static int __sbi_rfence_v02(int fid, const unsigned long *hart_mask,
+			    unsigned long start, unsigned long size,
+			    unsigned long arg4, unsigned long arg5)
+{
+	unsigned long hmask_val, hartid, hbase;
+	struct cpumask tmask;
+	int result;
+
+	if (!hart_mask || !(*hart_mask)) {
+		riscv_cpuid_to_hartid_mask(cpu_online_mask, &tmask);
+		hart_mask = cpumask_bits(&tmask);
+	}
+
+	hmask_val = 0;
+	hbase = 0;
+	for_each_set_bit(hartid, hart_mask, NR_CPUS) {
+		if (hmask_val && ((hbase + BITS_PER_LONG) <= hartid)) {
+			result = __sbi_rfence_v02_call(fid, hmask_val, hbase,
+						       start, size, arg4, arg5);
+			if (result)
+				return result;
+			hmask_val = 0;
+			hbase = 0;
+		}
+		if (!hmask_val)
+			hbase = hartid;
+		hmask_val |= 1UL << (hartid - hbase);
+	}
+
+	if (hmask_val) {
+		result = __sbi_rfence_v02_call(fid, hmask_val, hbase,
+					       start, size, arg4, arg5);
+		if (result)
+			return result;
+	}
+
+	return 0;
+}
+
+/**
+ * sbi_set_timer() - Program the timer for next timer event.
+ * @stime_value: The value after which next timer event should fire.
+ *
+ * Return: None
+ */
+void sbi_set_timer(uint64_t stime_value)
+{
+	__sbi_set_timer(stime_value);
+}
+
+/**
+ * sbi_send_ipi() - Send an IPI to any hart.
+ * @hart_mask: A cpu mask containing all the target harts.
+ *
+ * Return: None
+ */
+void sbi_send_ipi(const unsigned long *hart_mask)
+{
+	__sbi_send_ipi(hart_mask);
+}
+EXPORT_SYMBOL(sbi_send_ipi);
+
+/**
+ * sbi_remote_fence_i() - Execute FENCE.I instruction on given remote harts.
+ * @hart_mask: A cpu mask containing all the target harts.
+ *
+ * Return: None
+ */
+void sbi_remote_fence_i(const unsigned long *hart_mask)
+{
+	__sbi_rfence(SBI_EXT_RFENCE_REMOTE_FENCE_I,
+		     hart_mask, 0, 0, 0, 0);
+}
+EXPORT_SYMBOL(sbi_remote_fence_i);
+
+/**
+ * sbi_remote_sfence_vma() - Execute SFENCE.VMA instructions on given remote
+ *			     harts for the specified virtual address range.
+ * @hart_mask: A cpu mask containing all the target harts.
+ * @start: Start of the virtual address
+ * @size: Total size of the virtual address range.
+ *
+ * Return: None
+ */
+void sbi_remote_sfence_vma(const unsigned long *hart_mask,
+			   unsigned long start,
+			   unsigned long size)
+{
+	__sbi_rfence(SBI_EXT_RFENCE_REMOTE_SFENCE_VMA,
+		     hart_mask, start, size, 0, 0);
+}
+EXPORT_SYMBOL(sbi_remote_sfence_vma);
+
+/**
+ * sbi_remote_sfence_vma_asid() - Execute SFENCE.VMA instructions on given
+ * remote harts for a virtual address range belonging to a specific ASID.
+ *
+ * @hart_mask: A cpu mask containing all the target harts.
+ * @start: Start of the virtual address
+ * @size: Total size of the virtual address range.
+ * @asid: The value of address space identifier (ASID).
+ *
+ * Return: None
+ */
+void sbi_remote_sfence_vma_asid(const unsigned long *hart_mask,
+				unsigned long start,
+				unsigned long size,
+				unsigned long asid)
+{
+	__sbi_rfence(SBI_EXT_RFENCE_REMOTE_SFENCE_VMA_ASID,
+		     hart_mask, start, size, asid, 0);
+}
+EXPORT_SYMBOL(sbi_remote_sfence_vma_asid);
+
+/**
+ * sbi_remote_hfence_gvma() - Execute HFENCE.GVMA instructions on given remote
+ *			   harts for the specified guest physical address range.
+ * @hart_mask: A cpu mask containing all the target harts.
+ * @start: Start of the guest physical address
+ * @size: Total size of the guest physical address range.
+ *
+ * Return: None
+ */
+int sbi_remote_hfence_gvma(const unsigned long *hart_mask,
+			   unsigned long start,
+			   unsigned long size)
+{
+	return __sbi_rfence(SBI_EXT_RFENCE_REMOTE_HFENCE_GVMA,
+			    hart_mask, start, size, 0, 0);
+}
+EXPORT_SYMBOL_GPL(sbi_remote_hfence_gvma);
+
+/**
+ * sbi_remote_hfence_gvma_vmid() - Execute HFENCE.GVMA instructions on given
+ * remote harts for a guest physical address range belonging to a specific VMID.
+ *
+ * @hart_mask: A cpu mask containing all the target harts.
+ * @start: Start of the guest physical address
+ * @size: Total size of the guest physical address range.
+ * @vmid: The value of guest ID (VMID).
+ *
+ * Return: 0 if success, Error otherwise.
+ */
+int sbi_remote_hfence_gvma_vmid(const unsigned long *hart_mask,
+				unsigned long start,
+				unsigned long size,
+				unsigned long vmid)
+{
+	return __sbi_rfence(SBI_EXT_RFENCE_REMOTE_HFENCE_GVMA_VMID,
+			    hart_mask, start, size, vmid, 0);
+}
+EXPORT_SYMBOL(sbi_remote_hfence_gvma_vmid);
+
+/**
+ * sbi_remote_hfence_vvma() - Execute HFENCE.VVMA instructions on given remote
+ *			     harts for the current guest virtual address range.
+ * @hart_mask: A cpu mask containing all the target harts.
+ * @start: Start of the current guest virtual address
+ * @size: Total size of the current guest virtual address range.
+ *
+ * Return: None
+ */
+int sbi_remote_hfence_vvma(const unsigned long *hart_mask,
+			   unsigned long start,
+			   unsigned long size)
+{
+	return __sbi_rfence(SBI_EXT_RFENCE_REMOTE_HFENCE_VVMA,
+			    hart_mask, start, size, 0, 0);
+}
+EXPORT_SYMBOL(sbi_remote_hfence_vvma);
+
+/**
+ * sbi_remote_hfence_vvma_asid() - Execute HFENCE.VVMA instructions on given
+ * remote harts for current guest virtual address range belonging to a specific
+ * ASID.
+ *
+ * @hart_mask: A cpu mask containing all the target harts.
+ * @start: Start of the current guest virtual address
+ * @size: Total size of the current guest virtual address range.
+ * @asid: The value of address space identifier (ASID).
+ *
+ * Return: None
+ */
+int sbi_remote_hfence_vvma_asid(const unsigned long *hart_mask,
+				unsigned long start,
+				unsigned long size,
+				unsigned long asid)
+{
+	return __sbi_rfence(SBI_EXT_RFENCE_REMOTE_HFENCE_VVMA_ASID,
+			    hart_mask, start, size, asid, 0);
+}
+EXPORT_SYMBOL(sbi_remote_hfence_vvma_asid);
+
+/**
+ * sbi_probe_extension() - Check if an SBI extension ID is supported or not.
+ * @extid: The extension ID to be probed.
+ *
+ * Return: Extension specific nonzero value f yes, -ENOTSUPP otherwise.
+ */
+int sbi_probe_extension(int extid)
+{
+	struct sbiret ret;
+
+	ret = sbi_ecall(SBI_EXT_BASE, SBI_EXT_BASE_PROBE_EXT, extid,
+			0, 0, 0, 0, 0);
+	if (!ret.error)
+		if (ret.value)
+			return ret.value;
+
+	return -ENOTSUPP;
+}
+EXPORT_SYMBOL(sbi_probe_extension);
+
+static long __sbi_base_ecall(int fid)
+{
+	struct sbiret ret;
+
+	ret = sbi_ecall(SBI_EXT_BASE, fid, 0, 0, 0, 0, 0, 0);
+	if (!ret.error)
+		return ret.value;
+	else
+		return sbi_err_map_linux_errno(ret.error);
+}
+
+static inline long sbi_get_spec_version(void)
+{
+	return __sbi_base_ecall(SBI_EXT_BASE_GET_SPEC_VERSION);
+}
+
+static inline long sbi_get_firmware_id(void)
+{
+	return __sbi_base_ecall(SBI_EXT_BASE_GET_IMP_ID);
+}
+
+static inline long sbi_get_firmware_version(void)
+{
+	return __sbi_base_ecall(SBI_EXT_BASE_GET_IMP_VERSION);
+}
 
 static void sbi_power_off(void)
 {
 	sbi_shutdown();
 }
 
-static int __init sbi_init(void)
+int __init sbi_init(void)
 {
+	int ret;
+
 	pm_power_off = sbi_power_off;
+	ret = sbi_get_spec_version();
+	if (ret > 0)
+		sbi_spec_version = ret;
+
+	pr_info("SBI specification v%lu.%lu detected\n",
+		sbi_major_version(), sbi_minor_version());
+
+	if (!sbi_spec_is_0_1()) {
+		pr_info("SBI implementation ID=0x%lx Version=0x%lx\n",
+			sbi_get_firmware_id(), sbi_get_firmware_version());
+		if (sbi_probe_extension(SBI_EXT_TIME) > 0) {
+			__sbi_set_timer = __sbi_set_timer_v02;
+			pr_info("SBI v0.2 TIME extension detected\n");
+		} else {
+			__sbi_set_timer = __sbi_set_timer_v01;
+		}
+		if (sbi_probe_extension(SBI_EXT_IPI) > 0) {
+			__sbi_send_ipi	= __sbi_send_ipi_v02;
+			pr_info("SBI v0.2 IPI extension detected\n");
+		} else {
+			__sbi_send_ipi	= __sbi_send_ipi_v01;
+		}
+		if (sbi_probe_extension(SBI_EXT_RFENCE) > 0) {
+			__sbi_rfence	= __sbi_rfence_v02;
+			pr_info("SBI v0.2 RFENCE extension detected\n");
+		} else {
+			__sbi_rfence	= __sbi_rfence_v01;
+		}
+	} else {
+		__sbi_set_timer = __sbi_set_timer_v01;
+		__sbi_send_ipi	= __sbi_send_ipi_v01;
+		__sbi_rfence	= __sbi_rfence_v01;
+	}
+
 	return 0;
 }
-early_initcall(sbi_init);
diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
index 0a6d415..145128a 100644
--- a/arch/riscv/kernel/setup.c
+++ b/arch/riscv/kernel/setup.c
@@ -16,12 +16,14 @@
 #include <linux/of_platform.h>
 #include <linux/sched/task.h>
 #include <linux/swiotlb.h>
+#include <linux/smp.h>
 
 #include <asm/clint.h>
+#include <asm/cpu_ops.h>
 #include <asm/setup.h>
 #include <asm/sections.h>
 #include <asm/pgtable.h>
-#include <asm/smp.h>
+#include <asm/sbi.h>
 #include <asm/tlbflush.h>
 #include <asm/thread_info.h>
 #include <asm/kasan.h>
@@ -39,9 +41,14 @@ struct screen_info screen_info = {
 };
 #endif
 
-/* The lucky hart to first increment this variable will boot the other cores */
-atomic_t hart_lottery;
+/*
+ * The lucky hart to first increment this variable will boot the other cores.
+ * This is used before the kernel initializes the BSS so it can't be in the
+ * BSS.
+ */
+atomic_t hart_lottery __section(.sdata);
 unsigned long boot_cpu_hartid;
+static DEFINE_PER_CPU(struct cpu, cpu_devices);
 
 void __init parse_dtb(void)
 {
@@ -79,9 +86,28 @@ void __init setup_arch(char **cmdline_p)
 	kasan_init();
 #endif
 
+#if IS_ENABLED(CONFIG_RISCV_SBI)
+	sbi_init();
+#endif
+
 #ifdef CONFIG_SMP
 	setup_smp();
 #endif
 
 	riscv_fill_hwcap();
 }
+
+static int __init topology_init(void)
+{
+	int i;
+
+	for_each_possible_cpu(i) {
+		struct cpu *cpu = &per_cpu(cpu_devices, i);
+
+		cpu->hotpluggable = cpu_has_hotplug(i);
+		register_cpu(cpu, i);
+	}
+
+	return 0;
+}
+subsys_initcall(topology_init);
diff --git a/arch/riscv/kernel/smpboot.c b/arch/riscv/kernel/smpboot.c
index 8bc01f0..4e99227 100644
--- a/arch/riscv/kernel/smpboot.c
+++ b/arch/riscv/kernel/smpboot.c
@@ -25,6 +25,7 @@
 #include <linux/sched/task_stack.h>
 #include <linux/sched/mm.h>
 #include <asm/clint.h>
+#include <asm/cpu_ops.h>
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
 #include <asm/tlbflush.h>
@@ -34,8 +35,6 @@
 
 #include "head.h"
 
-void *__cpu_up_stack_pointer[NR_CPUS];
-void *__cpu_up_task_pointer[NR_CPUS];
 static DECLARE_COMPLETION(cpu_running);
 
 void __init smp_prepare_boot_cpu(void)
@@ -46,6 +45,7 @@ void __init smp_prepare_boot_cpu(void)
 void __init smp_prepare_cpus(unsigned int max_cpus)
 {
 	int cpuid;
+	int ret;
 
 	/* This covers non-smp usecase mandated by "nosmp" option */
 	if (max_cpus == 0)
@@ -54,6 +54,11 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	for_each_possible_cpu(cpuid) {
 		if (cpuid == smp_processor_id())
 			continue;
+		if (cpu_ops[cpuid]->cpu_prepare) {
+			ret = cpu_ops[cpuid]->cpu_prepare(cpuid);
+			if (ret)
+				continue;
+		}
 		set_cpu_present(cpuid, true);
 	}
 }
@@ -65,6 +70,8 @@ void __init setup_smp(void)
 	bool found_boot_cpu = false;
 	int cpuid = 1;
 
+	cpu_set_ops(0);
+
 	for_each_of_cpu_node(dn) {
 		hart = riscv_of_processor_hartid(dn);
 		if (hart < 0)
@@ -92,36 +99,38 @@ void __init setup_smp(void)
 			cpuid, nr_cpu_ids);
 
 	for (cpuid = 1; cpuid < nr_cpu_ids; cpuid++) {
-		if (cpuid_to_hartid_map(cpuid) != INVALID_HARTID)
+		if (cpuid_to_hartid_map(cpuid) != INVALID_HARTID) {
+			cpu_set_ops(cpuid);
 			set_cpu_possible(cpuid, true);
+		}
 	}
 }
 
+int start_secondary_cpu(int cpu, struct task_struct *tidle)
+{
+	if (cpu_ops[cpu]->cpu_start)
+		return cpu_ops[cpu]->cpu_start(cpu, tidle);
+
+	return -EOPNOTSUPP;
+}
+
 int __cpu_up(unsigned int cpu, struct task_struct *tidle)
 {
 	int ret = 0;
-	int hartid = cpuid_to_hartid_map(cpu);
 	tidle->thread_info.cpu = cpu;
 
-	/*
-	 * On RISC-V systems, all harts boot on their own accord.  Our _start
-	 * selects the first hart to boot the kernel and causes the remainder
-	 * of the harts to spin in a loop waiting for their stack pointer to be
-	 * setup by that main hart.  Writing __cpu_up_stack_pointer signals to
-	 * the spinning harts that they can continue the boot process.
-	 */
-	smp_mb();
-	WRITE_ONCE(__cpu_up_stack_pointer[hartid],
-		  task_stack_page(tidle) + THREAD_SIZE);
-	WRITE_ONCE(__cpu_up_task_pointer[hartid], tidle);
-
-	lockdep_assert_held(&cpu_running);
-	wait_for_completion_timeout(&cpu_running,
+	ret = start_secondary_cpu(cpu, tidle);
+	if (!ret) {
+		lockdep_assert_held(&cpu_running);
+		wait_for_completion_timeout(&cpu_running,
 					    msecs_to_jiffies(1000));
 
-	if (!cpu_online(cpu)) {
-		pr_crit("CPU%u: failed to come online\n", cpu);
-		ret = -EIO;
+		if (!cpu_online(cpu)) {
+			pr_crit("CPU%u: failed to come online\n", cpu);
+			ret = -EIO;
+		}
+	} else {
+		pr_crit("CPU%u: failed to start\n", cpu);
 	}
 
 	return ret;
@@ -134,7 +143,7 @@ void __init smp_cpus_done(unsigned int max_cpus)
 /*
  * C entry point for a secondary processor.
  */
-asmlinkage __visible void __init smp_callin(void)
+asmlinkage __visible void smp_callin(void)
 {
 	struct mm_struct *mm = &init_mm;
 
diff --git a/arch/riscv/kernel/soc.c b/arch/riscv/kernel/soc.c
new file mode 100644
index 0000000..0b3b3dc
--- /dev/null
+++ b/arch/riscv/kernel/soc.c
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ */
+#include <linux/init.h>
+#include <linux/libfdt.h>
+#include <asm/pgtable.h>
+#include <asm/soc.h>
+
+/*
+ * This is called extremly early, before parse_dtb(), to allow initializing
+ * SoC hardware before memory or any device driver initialization.
+ */
+void __init soc_early_init(void)
+{
+	void (*early_fn)(const void *fdt);
+	const struct of_device_id *s;
+	const void *fdt = dtb_early_va;
+
+	for (s = (void *)&__soc_early_init_table_start;
+	     (void *)s < (void *)&__soc_early_init_table_end; s++) {
+		if (!fdt_node_check_compatible(fdt, 0, s->compatible)) {
+			early_fn = s->data;
+			early_fn(fdt);
+			return;
+		}
+	}
+}
diff --git a/arch/riscv/kernel/stacktrace.c b/arch/riscv/kernel/stacktrace.c
index 0940681..02087fe 100644
--- a/arch/riscv/kernel/stacktrace.c
+++ b/arch/riscv/kernel/stacktrace.c
@@ -19,6 +19,8 @@ struct stackframe {
 	unsigned long ra;
 };
 
+register unsigned long sp_in_global __asm__("sp");
+
 void notrace walk_stackframe(struct task_struct *task, struct pt_regs *regs,
 			     bool (*fn)(unsigned long, void *), void *arg)
 {
@@ -29,7 +31,7 @@ void notrace walk_stackframe(struct task_struct *task, struct pt_regs *regs,
 		sp = user_stack_pointer(regs);
 		pc = instruction_pointer(regs);
 	} else if (task == NULL || task == current) {
-		const register unsigned long current_sp __asm__ ("sp");
+		const register unsigned long current_sp = sp_in_global;
 		fp = (unsigned long)__builtin_frame_address(0);
 		sp = current_sp;
 		pc = (unsigned long)walk_stackframe;
@@ -73,8 +75,7 @@ static void notrace walk_stackframe(struct task_struct *task,
 		sp = user_stack_pointer(regs);
 		pc = instruction_pointer(regs);
 	} else if (task == NULL || task == current) {
-		const register unsigned long current_sp __asm__ ("sp");
-		sp = current_sp;
+		sp = sp_in_global;
 		pc = (unsigned long)walk_stackframe;
 	} else {
 		/* task blocked in __switch_to */
diff --git a/arch/riscv/kernel/traps.c b/arch/riscv/kernel/traps.c
index 55ea614..7f58fa5 100644
--- a/arch/riscv/kernel/traps.c
+++ b/arch/riscv/kernel/traps.c
@@ -97,12 +97,33 @@ DO_ERROR_INFO(do_trap_insn_fault,
 	SIGSEGV, SEGV_ACCERR, "instruction access fault");
 DO_ERROR_INFO(do_trap_insn_illegal,
 	SIGILL, ILL_ILLOPC, "illegal instruction");
-DO_ERROR_INFO(do_trap_load_misaligned,
-	SIGBUS, BUS_ADRALN, "load address misaligned");
 DO_ERROR_INFO(do_trap_load_fault,
 	SIGSEGV, SEGV_ACCERR, "load access fault");
+#ifndef CONFIG_RISCV_M_MODE
+DO_ERROR_INFO(do_trap_load_misaligned,
+	SIGBUS, BUS_ADRALN, "Oops - load address misaligned");
 DO_ERROR_INFO(do_trap_store_misaligned,
-	SIGBUS, BUS_ADRALN, "store (or AMO) address misaligned");
+	SIGBUS, BUS_ADRALN, "Oops - store (or AMO) address misaligned");
+#else
+int handle_misaligned_load(struct pt_regs *regs);
+int handle_misaligned_store(struct pt_regs *regs);
+
+asmlinkage void do_trap_load_misaligned(struct pt_regs *regs)
+{
+	if (!handle_misaligned_load(regs))
+		return;
+	do_trap_error(regs, SIGBUS, BUS_ADRALN, regs->epc,
+		      "Oops - load address misaligned");
+}
+
+asmlinkage void do_trap_store_misaligned(struct pt_regs *regs)
+{
+	if (!handle_misaligned_store(regs))
+		return;
+	do_trap_error(regs, SIGBUS, BUS_ADRALN, regs->epc,
+		      "Oops - store (or AMO) address misaligned");
+}
+#endif
 DO_ERROR_INFO(do_trap_store_fault,
 	SIGSEGV, SEGV_ACCERR, "store (or AMO) access fault");
 DO_ERROR_INFO(do_trap_ecall_u,
@@ -118,7 +139,8 @@ static inline unsigned long get_break_insn_length(unsigned long pc)
 
 	if (probe_kernel_address((bug_insn_t *)pc, insn))
 		return 0;
-	return (((insn & __INSN_LENGTH_MASK) == __INSN_LENGTH_32) ? 4UL : 2UL);
+
+	return GET_INSN_LENGTH(insn);
 }
 
 asmlinkage __visible void do_trap_break(struct pt_regs *regs)
@@ -147,7 +169,7 @@ int is_valid_bugaddr(unsigned long pc)
 }
 #endif /* CONFIG_GENERIC_BUG */
 
-void __init trap_init(void)
+void trap_init(void)
 {
 	/*
 	 * Set sup0 scratch register to 0, indicating to exception vector
diff --git a/arch/riscv/kernel/traps_misaligned.c b/arch/riscv/kernel/traps_misaligned.c
new file mode 100644
index 0000000..46c4daf
--- /dev/null
+++ b/arch/riscv/kernel/traps_misaligned.c
@@ -0,0 +1,370 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/irq.h>
+
+#include <asm/processor.h>
+#include <asm/ptrace.h>
+#include <asm/csr.h>
+
+#define INSN_MATCH_LB			0x3
+#define INSN_MASK_LB			0x707f
+#define INSN_MATCH_LH			0x1003
+#define INSN_MASK_LH			0x707f
+#define INSN_MATCH_LW			0x2003
+#define INSN_MASK_LW			0x707f
+#define INSN_MATCH_LD			0x3003
+#define INSN_MASK_LD			0x707f
+#define INSN_MATCH_LBU			0x4003
+#define INSN_MASK_LBU			0x707f
+#define INSN_MATCH_LHU			0x5003
+#define INSN_MASK_LHU			0x707f
+#define INSN_MATCH_LWU			0x6003
+#define INSN_MASK_LWU			0x707f
+#define INSN_MATCH_SB			0x23
+#define INSN_MASK_SB			0x707f
+#define INSN_MATCH_SH			0x1023
+#define INSN_MASK_SH			0x707f
+#define INSN_MATCH_SW			0x2023
+#define INSN_MASK_SW			0x707f
+#define INSN_MATCH_SD			0x3023
+#define INSN_MASK_SD			0x707f
+
+#define INSN_MATCH_FLW			0x2007
+#define INSN_MASK_FLW			0x707f
+#define INSN_MATCH_FLD			0x3007
+#define INSN_MASK_FLD			0x707f
+#define INSN_MATCH_FLQ			0x4007
+#define INSN_MASK_FLQ			0x707f
+#define INSN_MATCH_FSW			0x2027
+#define INSN_MASK_FSW			0x707f
+#define INSN_MATCH_FSD			0x3027
+#define INSN_MASK_FSD			0x707f
+#define INSN_MATCH_FSQ			0x4027
+#define INSN_MASK_FSQ			0x707f
+
+#define INSN_MATCH_C_LD			0x6000
+#define INSN_MASK_C_LD			0xe003
+#define INSN_MATCH_C_SD			0xe000
+#define INSN_MASK_C_SD			0xe003
+#define INSN_MATCH_C_LW			0x4000
+#define INSN_MASK_C_LW			0xe003
+#define INSN_MATCH_C_SW			0xc000
+#define INSN_MASK_C_SW			0xe003
+#define INSN_MATCH_C_LDSP		0x6002
+#define INSN_MASK_C_LDSP		0xe003
+#define INSN_MATCH_C_SDSP		0xe002
+#define INSN_MASK_C_SDSP		0xe003
+#define INSN_MATCH_C_LWSP		0x4002
+#define INSN_MASK_C_LWSP		0xe003
+#define INSN_MATCH_C_SWSP		0xc002
+#define INSN_MASK_C_SWSP		0xe003
+
+#define INSN_MATCH_C_FLD		0x2000
+#define INSN_MASK_C_FLD			0xe003
+#define INSN_MATCH_C_FLW		0x6000
+#define INSN_MASK_C_FLW			0xe003
+#define INSN_MATCH_C_FSD		0xa000
+#define INSN_MASK_C_FSD			0xe003
+#define INSN_MATCH_C_FSW		0xe000
+#define INSN_MASK_C_FSW			0xe003
+#define INSN_MATCH_C_FLDSP		0x2002
+#define INSN_MASK_C_FLDSP		0xe003
+#define INSN_MATCH_C_FSDSP		0xa002
+#define INSN_MASK_C_FSDSP		0xe003
+#define INSN_MATCH_C_FLWSP		0x6002
+#define INSN_MASK_C_FLWSP		0xe003
+#define INSN_MATCH_C_FSWSP		0xe002
+#define INSN_MASK_C_FSWSP		0xe003
+
+#define INSN_LEN(insn)			((((insn) & 0x3) < 0x3) ? 2 : 4)
+
+#if defined(CONFIG_64BIT)
+#define LOG_REGBYTES			3
+#define XLEN				64
+#else
+#define LOG_REGBYTES			2
+#define XLEN				32
+#endif
+#define REGBYTES			(1 << LOG_REGBYTES)
+#define XLEN_MINUS_16			((XLEN) - 16)
+
+#define SH_RD				7
+#define SH_RS1				15
+#define SH_RS2				20
+#define SH_RS2C				2
+
+#define RV_X(x, s, n)			(((x) >> (s)) & ((1 << (n)) - 1))
+#define RVC_LW_IMM(x)			((RV_X(x, 6, 1) << 2) | \
+					 (RV_X(x, 10, 3) << 3) | \
+					 (RV_X(x, 5, 1) << 6))
+#define RVC_LD_IMM(x)			((RV_X(x, 10, 3) << 3) | \
+					 (RV_X(x, 5, 2) << 6))
+#define RVC_LWSP_IMM(x)			((RV_X(x, 4, 3) << 2) | \
+					 (RV_X(x, 12, 1) << 5) | \
+					 (RV_X(x, 2, 2) << 6))
+#define RVC_LDSP_IMM(x)			((RV_X(x, 5, 2) << 3) | \
+					 (RV_X(x, 12, 1) << 5) | \
+					 (RV_X(x, 2, 3) << 6))
+#define RVC_SWSP_IMM(x)			((RV_X(x, 9, 4) << 2) | \
+					 (RV_X(x, 7, 2) << 6))
+#define RVC_SDSP_IMM(x)			((RV_X(x, 10, 3) << 3) | \
+					 (RV_X(x, 7, 3) << 6))
+#define RVC_RS1S(insn)			(8 + RV_X(insn, SH_RD, 3))
+#define RVC_RS2S(insn)			(8 + RV_X(insn, SH_RS2C, 3))
+#define RVC_RS2(insn)			RV_X(insn, SH_RS2C, 5)
+
+#define SHIFT_RIGHT(x, y)		\
+	((y) < 0 ? ((x) << -(y)) : ((x) >> (y)))
+
+#define REG_MASK			\
+	((1 << (5 + LOG_REGBYTES)) - (1 << LOG_REGBYTES))
+
+#define REG_OFFSET(insn, pos)		\
+	(SHIFT_RIGHT((insn), (pos) - LOG_REGBYTES) & REG_MASK)
+
+#define REG_PTR(insn, pos, regs)	\
+	(ulong *)((ulong)(regs) + REG_OFFSET(insn, pos))
+
+#define GET_RM(insn)			(((insn) >> 12) & 7)
+
+#define GET_RS1(insn, regs)		(*REG_PTR(insn, SH_RS1, regs))
+#define GET_RS2(insn, regs)		(*REG_PTR(insn, SH_RS2, regs))
+#define GET_RS1S(insn, regs)		(*REG_PTR(RVC_RS1S(insn), 0, regs))
+#define GET_RS2S(insn, regs)		(*REG_PTR(RVC_RS2S(insn), 0, regs))
+#define GET_RS2C(insn, regs)		(*REG_PTR(insn, SH_RS2C, regs))
+#define GET_SP(regs)			(*REG_PTR(2, 0, regs))
+#define SET_RD(insn, regs, val)		(*REG_PTR(insn, SH_RD, regs) = (val))
+#define IMM_I(insn)			((s32)(insn) >> 20)
+#define IMM_S(insn)			(((s32)(insn) >> 25 << 5) | \
+					 (s32)(((insn) >> 7) & 0x1f))
+#define MASK_FUNCT3			0x7000
+
+#define GET_PRECISION(insn) (((insn) >> 25) & 3)
+#define GET_RM(insn) (((insn) >> 12) & 7)
+#define PRECISION_S 0
+#define PRECISION_D 1
+
+#define STR(x) XSTR(x)
+#define XSTR(x) #x
+
+#define DECLARE_UNPRIVILEGED_LOAD_FUNCTION(type, insn)			\
+static inline type load_##type(const type *addr)			\
+{									\
+	type val;							\
+	asm (#insn " %0, %1"						\
+	: "=&r" (val) : "m" (*addr));					\
+	return val;							\
+}
+
+#define DECLARE_UNPRIVILEGED_STORE_FUNCTION(type, insn)			\
+static inline void store_##type(type *addr, type val)			\
+{									\
+	asm volatile (#insn " %0, %1\n"					\
+	: : "r" (val), "m" (*addr));					\
+}
+
+DECLARE_UNPRIVILEGED_LOAD_FUNCTION(u8, lbu)
+DECLARE_UNPRIVILEGED_LOAD_FUNCTION(u16, lhu)
+DECLARE_UNPRIVILEGED_LOAD_FUNCTION(s8, lb)
+DECLARE_UNPRIVILEGED_LOAD_FUNCTION(s16, lh)
+DECLARE_UNPRIVILEGED_LOAD_FUNCTION(s32, lw)
+DECLARE_UNPRIVILEGED_STORE_FUNCTION(u8, sb)
+DECLARE_UNPRIVILEGED_STORE_FUNCTION(u16, sh)
+DECLARE_UNPRIVILEGED_STORE_FUNCTION(u32, sw)
+#if defined(CONFIG_64BIT)
+DECLARE_UNPRIVILEGED_LOAD_FUNCTION(u32, lwu)
+DECLARE_UNPRIVILEGED_LOAD_FUNCTION(u64, ld)
+DECLARE_UNPRIVILEGED_STORE_FUNCTION(u64, sd)
+DECLARE_UNPRIVILEGED_LOAD_FUNCTION(ulong, ld)
+#else
+DECLARE_UNPRIVILEGED_LOAD_FUNCTION(u32, lw)
+DECLARE_UNPRIVILEGED_LOAD_FUNCTION(ulong, lw)
+
+static inline u64 load_u64(const u64 *addr)
+{
+	return load_u32((u32 *)addr)
+		+ ((u64)load_u32((u32 *)addr + 1) << 32);
+}
+
+static inline void store_u64(u64 *addr, u64 val)
+{
+	store_u32((u32 *)addr, val);
+	store_u32((u32 *)addr + 1, val >> 32);
+}
+#endif
+
+static inline ulong get_insn(ulong mepc)
+{
+	register ulong __mepc asm ("a2") = mepc;
+	ulong val, rvc_mask = 3, tmp;
+
+	asm ("and %[tmp], %[addr], 2\n"
+		"bnez %[tmp], 1f\n"
+#if defined(CONFIG_64BIT)
+		STR(LWU) " %[insn], (%[addr])\n"
+#else
+		STR(LW) " %[insn], (%[addr])\n"
+#endif
+		"and %[tmp], %[insn], %[rvc_mask]\n"
+		"beq %[tmp], %[rvc_mask], 2f\n"
+		"sll %[insn], %[insn], %[xlen_minus_16]\n"
+		"srl %[insn], %[insn], %[xlen_minus_16]\n"
+		"j 2f\n"
+		"1:\n"
+		"lhu %[insn], (%[addr])\n"
+		"and %[tmp], %[insn], %[rvc_mask]\n"
+		"bne %[tmp], %[rvc_mask], 2f\n"
+		"lhu %[tmp], 2(%[addr])\n"
+		"sll %[tmp], %[tmp], 16\n"
+		"add %[insn], %[insn], %[tmp]\n"
+		"2:"
+	: [insn] "=&r" (val), [tmp] "=&r" (tmp)
+	: [addr] "r" (__mepc), [rvc_mask] "r" (rvc_mask),
+	  [xlen_minus_16] "i" (XLEN_MINUS_16));
+
+	return val;
+}
+
+union reg_data {
+	u8 data_bytes[8];
+	ulong data_ulong;
+	u64 data_u64;
+};
+
+int handle_misaligned_load(struct pt_regs *regs)
+{
+	union reg_data val;
+	unsigned long epc = regs->epc;
+	unsigned long insn = get_insn(epc);
+	unsigned long addr = csr_read(mtval);
+	int i, fp = 0, shift = 0, len = 0;
+
+	regs->epc = 0;
+
+	if ((insn & INSN_MASK_LW) == INSN_MATCH_LW) {
+		len = 4;
+		shift = 8 * (sizeof(unsigned long) - len);
+#if defined(CONFIG_64BIT)
+	} else if ((insn & INSN_MASK_LD) == INSN_MATCH_LD) {
+		len = 8;
+		shift = 8 * (sizeof(unsigned long) - len);
+	} else if ((insn & INSN_MASK_LWU) == INSN_MATCH_LWU) {
+		len = 4;
+#endif
+	} else if ((insn & INSN_MASK_FLD) == INSN_MATCH_FLD) {
+		fp = 1;
+		len = 8;
+	} else if ((insn & INSN_MASK_FLW) == INSN_MATCH_FLW) {
+		fp = 1;
+		len = 4;
+	} else if ((insn & INSN_MASK_LH) == INSN_MATCH_LH) {
+		len = 2;
+		shift = 8 * (sizeof(unsigned long) - len);
+	} else if ((insn & INSN_MASK_LHU) == INSN_MATCH_LHU) {
+		len = 2;
+#if defined(CONFIG_64BIT)
+	} else if ((insn & INSN_MASK_C_LD) == INSN_MATCH_C_LD) {
+		len = 8;
+		shift = 8 * (sizeof(unsigned long) - len);
+		insn = RVC_RS2S(insn) << SH_RD;
+	} else if ((insn & INSN_MASK_C_LDSP) == INSN_MATCH_C_LDSP &&
+		   ((insn >> SH_RD) & 0x1f)) {
+		len = 8;
+		shift = 8 * (sizeof(unsigned long) - len);
+#endif
+	} else if ((insn & INSN_MASK_C_LW) == INSN_MATCH_C_LW) {
+		len = 4;
+		shift = 8 * (sizeof(unsigned long) - len);
+		insn = RVC_RS2S(insn) << SH_RD;
+	} else if ((insn & INSN_MASK_C_LWSP) == INSN_MATCH_C_LWSP &&
+		   ((insn >> SH_RD) & 0x1f)) {
+		len = 4;
+		shift = 8 * (sizeof(unsigned long) - len);
+	} else if ((insn & INSN_MASK_C_FLD) == INSN_MATCH_C_FLD) {
+		fp = 1;
+		len = 8;
+		insn = RVC_RS2S(insn) << SH_RD;
+	} else if ((insn & INSN_MASK_C_FLDSP) == INSN_MATCH_C_FLDSP) {
+		fp = 1;
+		len = 8;
+#if defined(CONFIG_32BIT)
+	} else if ((insn & INSN_MASK_C_FLW) == INSN_MATCH_C_FLW) {
+		fp = 1;
+		len = 4;
+		insn = RVC_RS2S(insn) << SH_RD;
+	} else if ((insn & INSN_MASK_C_FLWSP) == INSN_MATCH_C_FLWSP) {
+		fp = 1;
+		len = 4;
+#endif
+	} else {
+		regs->epc = epc;
+		return -1;
+	}
+
+	val.data_u64 = 0;
+	for (i = 0; i < len; i++)
+		val.data_bytes[i] = load_u8((void *)(addr + i));
+
+	if (fp)
+		return -1;
+	SET_RD(insn, regs, val.data_ulong << shift >> shift);
+
+	regs->epc = epc + INSN_LEN(insn);
+
+	return 0;
+}
+
+int handle_misaligned_store(struct pt_regs *regs)
+{
+	union reg_data val;
+	unsigned long epc = regs->epc;
+	unsigned long insn = get_insn(epc);
+	unsigned long addr = csr_read(mtval);
+	int i, len = 0;
+
+	regs->epc = 0;
+
+	val.data_ulong = GET_RS2(insn, regs);
+
+	if ((insn & INSN_MASK_SW) == INSN_MATCH_SW) {
+		len = 4;
+#if defined(CONFIG_64BIT)
+	} else if ((insn & INSN_MASK_SD) == INSN_MATCH_SD) {
+		len = 8;
+#endif
+	} else if ((insn & INSN_MASK_SH) == INSN_MATCH_SH) {
+		len = 2;
+#if defined(CONFIG_64BIT)
+	} else if ((insn & INSN_MASK_C_SD) == INSN_MATCH_C_SD) {
+		len = 8;
+		val.data_ulong = GET_RS2S(insn, regs);
+	} else if ((insn & INSN_MASK_C_SDSP) == INSN_MATCH_C_SDSP &&
+		   ((insn >> SH_RD) & 0x1f)) {
+		len = 8;
+		val.data_ulong = GET_RS2C(insn, regs);
+#endif
+	} else if ((insn & INSN_MASK_C_SW) == INSN_MATCH_C_SW) {
+		len = 4;
+		val.data_ulong = GET_RS2S(insn, regs);
+	} else if ((insn & INSN_MASK_C_SWSP) == INSN_MATCH_C_SWSP &&
+		   ((insn >> SH_RD) & 0x1f)) {
+		len = 4;
+		val.data_ulong = GET_RS2C(insn, regs);
+	} else {
+		regs->epc = epc;
+		return -1;
+	}
+
+	for (i = 0; i < len; i++)
+		store_u8((void *)(addr + i), val.data_bytes[i]);
+
+	regs->epc = epc + INSN_LEN(insn);
+
+	return 0;
+}
diff --git a/arch/riscv/kernel/vdso/.gitignore b/arch/riscv/kernel/vdso/.gitignore
index 97c2d69..11ebee9 100644
--- a/arch/riscv/kernel/vdso/.gitignore
+++ b/arch/riscv/kernel/vdso/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 vdso.lds
 *.tmp
diff --git a/arch/riscv/kernel/vmlinux.lds.S b/arch/riscv/kernel/vmlinux.lds.S
index 1e0193d..0339b6b 100644
--- a/arch/riscv/kernel/vmlinux.lds.S
+++ b/arch/riscv/kernel/vmlinux.lds.S
@@ -9,7 +9,9 @@
 #include <asm/page.h>
 #include <asm/cache.h>
 #include <asm/thread_info.h>
+#include <asm/set_memory.h>
 
+#include <linux/sizes.h>
 OUTPUT_ARCH(riscv)
 ENTRY(_start)
 
@@ -20,10 +22,18 @@
 	/* Beginning of code and text segment */
 	. = LOAD_OFFSET;
 	_start = .;
-	__init_begin = .;
 	HEAD_TEXT_SECTION
+	. = ALIGN(PAGE_SIZE);
+
+	__init_begin = .;
 	INIT_TEXT_SECTION(PAGE_SIZE)
 	INIT_DATA_SECTION(16)
+	. = ALIGN(8);
+	__soc_early_init_table : {
+		__soc_early_init_table_start = .;
+		KEEP(*(__soc_early_init_table))
+		__soc_early_init_table_end = .;
+	}
 	/* we have to discard exit text and such at runtime, not link time */
 	.exit.text :
 	{
@@ -36,6 +46,7 @@
 	PERCPU_SECTION(L1_CACHE_BYTES)
 	__init_end = .;
 
+	. = ALIGN(SECTION_ALIGN);
 	.text : {
 		_text = .;
 		_stext = .;
@@ -53,24 +64,26 @@
 
 	/* Start of data section */
 	_sdata = .;
-	RO_DATA(L1_CACHE_BYTES)
+	RO_DATA(SECTION_ALIGN)
 	.srodata : {
 		*(.srodata*)
 	}
 
+	EXCEPTION_TABLE(0x10)
+
+	. = ALIGN(SECTION_ALIGN);
+	_data = .;
+
 	RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
 	.sdata : {
 		__global_pointer$ = . + 0x800;
 		*(.sdata*)
 		/* End of data section */
 		_edata = .;
-		*(.sbss*)
 	}
 
 	BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 0)
 
-	EXCEPTION_TABLE(0x10)
-
 	.rel.dyn : {
 		*(.rel.dyn*)
 	}
diff --git a/arch/riscv/lib/uaccess.S b/arch/riscv/lib/uaccess.S
index f29d2ba..fceaeb1 100644
--- a/arch/riscv/lib/uaccess.S
+++ b/arch/riscv/lib/uaccess.S
@@ -3,14 +3,12 @@
 #include <asm/asm.h>
 #include <asm/csr.h>
 
-	.altmacro
 	.macro fixup op reg addr lbl
-	LOCAL _epc
-_epc:
+100:
 	\op \reg, \addr
 	.section __ex_table,"a"
 	.balign RISCV_SZPTR
-	RISCV_PTR _epc, \lbl
+	RISCV_PTR 100b, \lbl
 	.previous
 	.endm
 
diff --git a/arch/riscv/mm/Makefile b/arch/riscv/mm/Makefile
index 50b7af5..363ef01 100644
--- a/arch/riscv/mm/Makefile
+++ b/arch/riscv/mm/Makefile
@@ -7,7 +7,7 @@
 
 obj-y += init.o
 obj-y += extable.o
-obj-$(CONFIG_MMU) += fault.o
+obj-$(CONFIG_MMU) += fault.o pageattr.o
 obj-y += cacheflush.o
 obj-y += context.o
 
@@ -15,6 +15,7 @@
 obj-$(CONFIG_SMP) += tlbflush.o
 endif
 obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
+obj-$(CONFIG_PTDUMP_CORE) += ptdump.o
 obj-$(CONFIG_KASAN)   += kasan_init.o
 
 ifdef CONFIG_KASAN
diff --git a/arch/riscv/mm/hugetlbpage.c b/arch/riscv/mm/hugetlbpage.c
index 0d4747e..a6189ed 100644
--- a/arch/riscv/mm/hugetlbpage.c
+++ b/arch/riscv/mm/hugetlbpage.c
@@ -4,14 +4,12 @@
 
 int pud_huge(pud_t pud)
 {
-	return pud_present(pud) &&
-		(pud_val(pud) & (_PAGE_READ | _PAGE_WRITE | _PAGE_EXEC));
+	return pud_leaf(pud);
 }
 
 int pmd_huge(pmd_t pmd)
 {
-	return pmd_present(pmd) &&
-		(pmd_val(pmd) & (_PAGE_READ | _PAGE_WRITE | _PAGE_EXEC));
+	return pmd_leaf(pmd);
 }
 
 static __init int setup_hugepagesz(char *opt)
diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
index fab8559..b55be44 100644
--- a/arch/riscv/mm/init.c
+++ b/arch/riscv/mm/init.c
@@ -12,6 +12,7 @@
 #include <linux/sizes.h>
 #include <linux/of_fdt.h>
 #include <linux/libfdt.h>
+#include <linux/set_memory.h>
 
 #include <asm/fixmap.h>
 #include <asm/tlbflush.h>
@@ -477,6 +478,17 @@ static void __init setup_vm_final(void)
 	csr_write(CSR_SATP, PFN_DOWN(__pa_symbol(swapper_pg_dir)) | SATP_MODE);
 	local_flush_tlb_all();
 }
+
+void free_initmem(void)
+{
+	unsigned long init_begin = (unsigned long)__init_begin;
+	unsigned long init_end = (unsigned long)__init_end;
+
+	/* Make the region as non-execuatble. */
+	set_memory_nx(init_begin, (init_end - init_begin) >> PAGE_SHIFT);
+	free_initmem_default(POISON_FREE_INITMEM);
+}
+
 #else
 asmlinkage void __init setup_vm(uintptr_t dtb_pa)
 {
@@ -488,6 +500,38 @@ static inline void setup_vm_final(void)
 }
 #endif /* CONFIG_MMU */
 
+#ifdef CONFIG_STRICT_KERNEL_RWX
+void set_kernel_text_rw(void)
+{
+	unsigned long text_start = (unsigned long)_text;
+	unsigned long text_end = (unsigned long)_etext;
+
+	set_memory_rw(text_start, (text_end - text_start) >> PAGE_SHIFT);
+}
+
+void set_kernel_text_ro(void)
+{
+	unsigned long text_start = (unsigned long)_text;
+	unsigned long text_end = (unsigned long)_etext;
+
+	set_memory_ro(text_start, (text_end - text_start) >> PAGE_SHIFT);
+}
+
+void mark_rodata_ro(void)
+{
+	unsigned long text_start = (unsigned long)_text;
+	unsigned long text_end = (unsigned long)_etext;
+	unsigned long rodata_start = (unsigned long)__start_rodata;
+	unsigned long data_start = (unsigned long)_data;
+	unsigned long max_low = (unsigned long)(__va(PFN_PHYS(max_low_pfn)));
+
+	set_memory_ro(text_start, (text_end - text_start) >> PAGE_SHIFT);
+	set_memory_ro(rodata_start, (data_start - rodata_start) >> PAGE_SHIFT);
+	set_memory_nx(rodata_start, (data_start - rodata_start) >> PAGE_SHIFT);
+	set_memory_nx(data_start, (max_low - data_start) >> PAGE_SHIFT);
+}
+#endif
+
 void __init paging_init(void)
 {
 	setup_vm_final();
diff --git a/arch/riscv/mm/pageattr.c b/arch/riscv/mm/pageattr.c
new file mode 100644
index 0000000..728759e
--- /dev/null
+++ b/arch/riscv/mm/pageattr.c
@@ -0,0 +1,187 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2019 SiFive
+ */
+
+#include <linux/pagewalk.h>
+#include <asm/pgtable.h>
+#include <asm/tlbflush.h>
+#include <asm/bitops.h>
+
+struct pageattr_masks {
+	pgprot_t set_mask;
+	pgprot_t clear_mask;
+};
+
+static unsigned long set_pageattr_masks(unsigned long val, struct mm_walk *walk)
+{
+	struct pageattr_masks *masks = walk->private;
+	unsigned long new_val = val;
+
+	new_val &= ~(pgprot_val(masks->clear_mask));
+	new_val |= (pgprot_val(masks->set_mask));
+
+	return new_val;
+}
+
+static int pageattr_pgd_entry(pgd_t *pgd, unsigned long addr,
+			      unsigned long next, struct mm_walk *walk)
+{
+	pgd_t val = READ_ONCE(*pgd);
+
+	if (pgd_leaf(val)) {
+		val = __pgd(set_pageattr_masks(pgd_val(val), walk));
+		set_pgd(pgd, val);
+	}
+
+	return 0;
+}
+
+static int pageattr_p4d_entry(p4d_t *p4d, unsigned long addr,
+			      unsigned long next, struct mm_walk *walk)
+{
+	p4d_t val = READ_ONCE(*p4d);
+
+	if (p4d_leaf(val)) {
+		val = __p4d(set_pageattr_masks(p4d_val(val), walk));
+		set_p4d(p4d, val);
+	}
+
+	return 0;
+}
+
+static int pageattr_pud_entry(pud_t *pud, unsigned long addr,
+			      unsigned long next, struct mm_walk *walk)
+{
+	pud_t val = READ_ONCE(*pud);
+
+	if (pud_leaf(val)) {
+		val = __pud(set_pageattr_masks(pud_val(val), walk));
+		set_pud(pud, val);
+	}
+
+	return 0;
+}
+
+static int pageattr_pmd_entry(pmd_t *pmd, unsigned long addr,
+			      unsigned long next, struct mm_walk *walk)
+{
+	pmd_t val = READ_ONCE(*pmd);
+
+	if (pmd_leaf(val)) {
+		val = __pmd(set_pageattr_masks(pmd_val(val), walk));
+		set_pmd(pmd, val);
+	}
+
+	return 0;
+}
+
+static int pageattr_pte_entry(pte_t *pte, unsigned long addr,
+			      unsigned long next, struct mm_walk *walk)
+{
+	pte_t val = READ_ONCE(*pte);
+
+	val = __pte(set_pageattr_masks(pte_val(val), walk));
+	set_pte(pte, val);
+
+	return 0;
+}
+
+static int pageattr_pte_hole(unsigned long addr, unsigned long next,
+			     int depth, struct mm_walk *walk)
+{
+	/* Nothing to do here */
+	return 0;
+}
+
+const static struct mm_walk_ops pageattr_ops = {
+	.pgd_entry = pageattr_pgd_entry,
+	.p4d_entry = pageattr_p4d_entry,
+	.pud_entry = pageattr_pud_entry,
+	.pmd_entry = pageattr_pmd_entry,
+	.pte_entry = pageattr_pte_entry,
+	.pte_hole = pageattr_pte_hole,
+};
+
+static int __set_memory(unsigned long addr, int numpages, pgprot_t set_mask,
+			pgprot_t clear_mask)
+{
+	int ret;
+	unsigned long start = addr;
+	unsigned long end = start + PAGE_SIZE * numpages;
+	struct pageattr_masks masks = {
+		.set_mask = set_mask,
+		.clear_mask = clear_mask
+	};
+
+	if (!numpages)
+		return 0;
+
+	down_read(&init_mm.mmap_sem);
+	ret =  walk_page_range_novma(&init_mm, start, end, &pageattr_ops, NULL,
+				     &masks);
+	up_read(&init_mm.mmap_sem);
+
+	flush_tlb_kernel_range(start, end);
+
+	return ret;
+}
+
+int set_memory_ro(unsigned long addr, int numpages)
+{
+	return __set_memory(addr, numpages, __pgprot(_PAGE_READ),
+			    __pgprot(_PAGE_WRITE));
+}
+
+int set_memory_rw(unsigned long addr, int numpages)
+{
+	return __set_memory(addr, numpages, __pgprot(_PAGE_READ | _PAGE_WRITE),
+			    __pgprot(0));
+}
+
+int set_memory_x(unsigned long addr, int numpages)
+{
+	return __set_memory(addr, numpages, __pgprot(_PAGE_EXEC), __pgprot(0));
+}
+
+int set_memory_nx(unsigned long addr, int numpages)
+{
+	return __set_memory(addr, numpages, __pgprot(0), __pgprot(_PAGE_EXEC));
+}
+
+int set_direct_map_invalid_noflush(struct page *page)
+{
+	unsigned long start = (unsigned long)page_address(page);
+	unsigned long end = start + PAGE_SIZE;
+	struct pageattr_masks masks = {
+		.set_mask = __pgprot(0),
+		.clear_mask = __pgprot(_PAGE_PRESENT)
+	};
+
+	return walk_page_range(&init_mm, start, end, &pageattr_ops, &masks);
+}
+
+int set_direct_map_default_noflush(struct page *page)
+{
+	unsigned long start = (unsigned long)page_address(page);
+	unsigned long end = start + PAGE_SIZE;
+	struct pageattr_masks masks = {
+		.set_mask = PAGE_KERNEL,
+		.clear_mask = __pgprot(0)
+	};
+
+	return walk_page_range(&init_mm, start, end, &pageattr_ops, &masks);
+}
+
+void __kernel_map_pages(struct page *page, int numpages, int enable)
+{
+	if (!debug_pagealloc_enabled())
+		return;
+
+	if (enable)
+		__set_memory((unsigned long)page_address(page), numpages,
+			     __pgprot(_PAGE_PRESENT), __pgprot(0));
+	else
+		__set_memory((unsigned long)page_address(page), numpages,
+			     __pgprot(0), __pgprot(_PAGE_PRESENT));
+}
diff --git a/arch/riscv/mm/ptdump.c b/arch/riscv/mm/ptdump.c
new file mode 100644
index 0000000..7eab76a
--- /dev/null
+++ b/arch/riscv/mm/ptdump.c
@@ -0,0 +1,317 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2019 SiFive
+ */
+
+#include <linux/init.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/ptdump.h>
+
+#include <asm/ptdump.h>
+#include <asm/pgtable.h>
+#include <asm/kasan.h>
+
+#define pt_dump_seq_printf(m, fmt, args...)	\
+({						\
+	if (m)					\
+		seq_printf(m, fmt, ##args);	\
+})
+
+#define pt_dump_seq_puts(m, fmt)	\
+({					\
+	if (m)				\
+		seq_printf(m, fmt);	\
+})
+
+/*
+ * The page dumper groups page table entries of the same type into a single
+ * description. It uses pg_state to track the range information while
+ * iterating over the pte entries. When the continuity is broken it then
+ * dumps out a description of the range.
+ */
+struct pg_state {
+	struct ptdump_state ptdump;
+	struct seq_file *seq;
+	const struct addr_marker *marker;
+	unsigned long start_address;
+	unsigned long start_pa;
+	unsigned long last_pa;
+	int level;
+	u64 current_prot;
+	bool check_wx;
+	unsigned long wx_pages;
+};
+
+/* Address marker */
+struct addr_marker {
+	unsigned long start_address;
+	const char *name;
+};
+
+static struct addr_marker address_markers[] = {
+#ifdef CONFIG_KASAN
+	{KASAN_SHADOW_START,	"Kasan shadow start"},
+	{KASAN_SHADOW_END,	"Kasan shadow end"},
+#endif
+	{FIXADDR_START,		"Fixmap start"},
+	{FIXADDR_TOP,		"Fixmap end"},
+	{PCI_IO_START,		"PCI I/O start"},
+	{PCI_IO_END,		"PCI I/O end"},
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+	{VMEMMAP_START,		"vmemmap start"},
+	{VMEMMAP_END,		"vmemmap end"},
+#endif
+	{VMALLOC_START,		"vmalloc() area"},
+	{VMALLOC_END,		"vmalloc() end"},
+	{PAGE_OFFSET,		"Linear mapping"},
+	{-1, NULL},
+};
+
+/* Page Table Entry */
+struct prot_bits {
+	u64 mask;
+	u64 val;
+	const char *set;
+	const char *clear;
+};
+
+static const struct prot_bits pte_bits[] = {
+	{
+		.mask = _PAGE_SOFT,
+		.val = _PAGE_SOFT,
+		.set = "RSW",
+		.clear = "   ",
+	}, {
+		.mask = _PAGE_DIRTY,
+		.val = _PAGE_DIRTY,
+		.set = "D",
+		.clear = ".",
+	}, {
+		.mask = _PAGE_ACCESSED,
+		.val = _PAGE_ACCESSED,
+		.set = "A",
+		.clear = ".",
+	}, {
+		.mask = _PAGE_GLOBAL,
+		.val = _PAGE_GLOBAL,
+		.set = "G",
+		.clear = ".",
+	}, {
+		.mask = _PAGE_USER,
+		.val = _PAGE_USER,
+		.set = "U",
+		.clear = ".",
+	}, {
+		.mask = _PAGE_EXEC,
+		.val = _PAGE_EXEC,
+		.set = "X",
+		.clear = ".",
+	}, {
+		.mask = _PAGE_WRITE,
+		.val = _PAGE_WRITE,
+		.set = "W",
+		.clear = ".",
+	}, {
+		.mask = _PAGE_READ,
+		.val = _PAGE_READ,
+		.set = "R",
+		.clear = ".",
+	}, {
+		.mask = _PAGE_PRESENT,
+		.val = _PAGE_PRESENT,
+		.set = "V",
+		.clear = ".",
+	}
+};
+
+/* Page Level */
+struct pg_level {
+	const char *name;
+	u64 mask;
+};
+
+static struct pg_level pg_level[] = {
+	{ /* pgd */
+		.name = "PGD",
+	}, { /* p4d */
+		.name = (CONFIG_PGTABLE_LEVELS > 4) ? "P4D" : "PGD",
+	}, { /* pud */
+		.name = (CONFIG_PGTABLE_LEVELS > 3) ? "PUD" : "PGD",
+	}, { /* pmd */
+		.name = (CONFIG_PGTABLE_LEVELS > 2) ? "PMD" : "PGD",
+	}, { /* pte */
+		.name = "PTE",
+	},
+};
+
+static void dump_prot(struct pg_state *st)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(pte_bits); i++) {
+		const char *s;
+
+		if ((st->current_prot & pte_bits[i].mask) == pte_bits[i].val)
+			s = pte_bits[i].set;
+		else
+			s = pte_bits[i].clear;
+
+		if (s)
+			pt_dump_seq_printf(st->seq, " %s", s);
+	}
+}
+
+#ifdef CONFIG_64BIT
+#define ADDR_FORMAT	"0x%016lx"
+#else
+#define ADDR_FORMAT	"0x%08lx"
+#endif
+static void dump_addr(struct pg_state *st, unsigned long addr)
+{
+	static const char units[] = "KMGTPE";
+	const char *unit = units;
+	unsigned long delta;
+
+	pt_dump_seq_printf(st->seq, ADDR_FORMAT "-" ADDR_FORMAT "   ",
+			   st->start_address, addr);
+
+	pt_dump_seq_printf(st->seq, " " ADDR_FORMAT " ", st->start_pa);
+	delta = (addr - st->start_address) >> 10;
+
+	while (!(delta & 1023) && unit[1]) {
+		delta >>= 10;
+		unit++;
+	}
+
+	pt_dump_seq_printf(st->seq, "%9lu%c %s", delta, *unit,
+			   pg_level[st->level].name);
+}
+
+static void note_prot_wx(struct pg_state *st, unsigned long addr)
+{
+	if (!st->check_wx)
+		return;
+
+	if ((st->current_prot & (_PAGE_WRITE | _PAGE_EXEC)) !=
+	    (_PAGE_WRITE | _PAGE_EXEC))
+		return;
+
+	WARN_ONCE(1, "riscv/mm: Found insecure W+X mapping at address %p/%pS\n",
+		  (void *)st->start_address, (void *)st->start_address);
+
+	st->wx_pages += (addr - st->start_address) / PAGE_SIZE;
+}
+
+static void note_page(struct ptdump_state *pt_st, unsigned long addr,
+		      int level, unsigned long val)
+{
+	struct pg_state *st = container_of(pt_st, struct pg_state, ptdump);
+	u64 pa = PFN_PHYS(pte_pfn(__pte(val)));
+	u64 prot = 0;
+
+	if (level >= 0)
+		prot = val & pg_level[level].mask;
+
+	if (st->level == -1) {
+		st->level = level;
+		st->current_prot = prot;
+		st->start_address = addr;
+		st->start_pa = pa;
+		st->last_pa = pa;
+		pt_dump_seq_printf(st->seq, "---[ %s ]---\n", st->marker->name);
+	} else if (prot != st->current_prot ||
+		   level != st->level || addr >= st->marker[1].start_address) {
+		if (st->current_prot) {
+			note_prot_wx(st, addr);
+			dump_addr(st, addr);
+			dump_prot(st);
+			pt_dump_seq_puts(st->seq, "\n");
+		}
+
+		while (addr >= st->marker[1].start_address) {
+			st->marker++;
+			pt_dump_seq_printf(st->seq, "---[ %s ]---\n",
+					   st->marker->name);
+		}
+
+		st->start_address = addr;
+		st->start_pa = pa;
+		st->last_pa = pa;
+		st->current_prot = prot;
+		st->level = level;
+	} else {
+		st->last_pa = pa;
+	}
+}
+
+static void ptdump_walk(struct seq_file *s)
+{
+	struct pg_state st = {
+		.seq = s,
+		.marker = address_markers,
+		.level = -1,
+		.ptdump = {
+			.note_page = note_page,
+			.range = (struct ptdump_range[]) {
+				{KERN_VIRT_START, ULONG_MAX},
+				{0, 0}
+			}
+		}
+	};
+
+	ptdump_walk_pgd(&st.ptdump, &init_mm, NULL);
+}
+
+void ptdump_check_wx(void)
+{
+	struct pg_state st = {
+		.seq = NULL,
+		.marker = (struct addr_marker[]) {
+			{0, NULL},
+			{-1, NULL},
+		},
+		.level = -1,
+		.check_wx = true,
+		.ptdump = {
+			.note_page = note_page,
+			.range = (struct ptdump_range[]) {
+				{KERN_VIRT_START, ULONG_MAX},
+				{0, 0}
+			}
+		}
+	};
+
+	ptdump_walk_pgd(&st.ptdump, &init_mm, NULL);
+
+	if (st.wx_pages)
+		pr_warn("Checked W+X mappings: failed, %lu W+X pages found\n",
+			st.wx_pages);
+	else
+		pr_info("Checked W+X mappings: passed, no W+X pages found\n");
+}
+
+static int ptdump_show(struct seq_file *m, void *v)
+{
+	ptdump_walk(m);
+
+	return 0;
+}
+
+DEFINE_SHOW_ATTRIBUTE(ptdump);
+
+static int ptdump_init(void)
+{
+	unsigned int i, j;
+
+	for (i = 0; i < ARRAY_SIZE(pg_level); i++)
+		for (j = 0; j < ARRAY_SIZE(pte_bits); j++)
+			pg_level[i].mask |= pte_bits[j].mask;
+
+	debugfs_create_file("kernel_page_tables", 0400, NULL, NULL,
+			    &ptdump_fops);
+
+	return 0;
+}
+
+device_initcall(ptdump_init);
diff --git a/arch/riscv/net/bpf_jit_comp64.c b/arch/riscv/net/bpf_jit_comp64.c
index cc1985d..d208a9f 100644
--- a/arch/riscv/net/bpf_jit_comp64.c
+++ b/arch/riscv/net/bpf_jit_comp64.c
@@ -110,6 +110,16 @@ static bool is_32b_int(s64 val)
 	return -(1L << 31) <= val && val < (1L << 31);
 }
 
+static bool in_auipc_jalr_range(s64 val)
+{
+	/*
+	 * auipc+jalr can reach any signed PC-relative offset in the range
+	 * [-2^31 - 2^11, 2^31 - 2^11).
+	 */
+	return (-(1L << 31) - (1L << 11)) <= val &&
+		val < ((1L << 31) - (1L << 11));
+}
+
 static void emit_imm(u8 rd, s64 val, struct rv_jit_context *ctx)
 {
 	/* Note that the immediate from the add is sign-extended,
@@ -380,20 +390,24 @@ static void emit_sext_32_rd(u8 *rd, struct rv_jit_context *ctx)
 	*rd = RV_REG_T2;
 }
 
-static void emit_jump_and_link(u8 rd, s64 rvoff, bool force_jalr,
-			       struct rv_jit_context *ctx)
+static int emit_jump_and_link(u8 rd, s64 rvoff, bool force_jalr,
+			      struct rv_jit_context *ctx)
 {
 	s64 upper, lower;
 
 	if (rvoff && is_21b_int(rvoff) && !force_jalr) {
 		emit(rv_jal(rd, rvoff >> 1), ctx);
-		return;
+		return 0;
+	} else if (in_auipc_jalr_range(rvoff)) {
+		upper = (rvoff + (1 << 11)) >> 12;
+		lower = rvoff & 0xfff;
+		emit(rv_auipc(RV_REG_T1, upper), ctx);
+		emit(rv_jalr(rd, RV_REG_T1, lower), ctx);
+		return 0;
 	}
 
-	upper = (rvoff + (1 << 11)) >> 12;
-	lower = rvoff & 0xfff;
-	emit(rv_auipc(RV_REG_T1, upper), ctx);
-	emit(rv_jalr(rd, RV_REG_T1, lower), ctx);
+	pr_err("bpf-jit: target offset 0x%llx is out of range\n", rvoff);
+	return -ERANGE;
 }
 
 static bool is_signed_bpf_cond(u8 cond)
@@ -407,18 +421,16 @@ static int emit_call(bool fixed, u64 addr, struct rv_jit_context *ctx)
 	s64 off = 0;
 	u64 ip;
 	u8 rd;
+	int ret;
 
 	if (addr && ctx->insns) {
 		ip = (u64)(long)(ctx->insns + ctx->ninsns);
 		off = addr - ip;
-		if (!is_32b_int(off)) {
-			pr_err("bpf-jit: target call addr %pK is out of range\n",
-			       (void *)addr);
-			return -ERANGE;
-		}
 	}
 
-	emit_jump_and_link(RV_REG_RA, off, !fixed, ctx);
+	ret = emit_jump_and_link(RV_REG_RA, off, !fixed, ctx);
+	if (ret)
+		return ret;
 	rd = bpf_to_rv_reg(BPF_REG_0, ctx);
 	emit(rv_addi(rd, RV_REG_A0, 0), ctx);
 	return 0;
@@ -429,7 +441,7 @@ int bpf_jit_emit_insn(const struct bpf_insn *insn, struct rv_jit_context *ctx,
 {
 	bool is64 = BPF_CLASS(insn->code) == BPF_ALU64 ||
 		    BPF_CLASS(insn->code) == BPF_JMP;
-	int s, e, rvoff, i = insn - ctx->prog->insnsi;
+	int s, e, rvoff, ret, i = insn - ctx->prog->insnsi;
 	struct bpf_prog_aux *aux = ctx->prog->aux;
 	u8 rd = -1, rs = -1, code = insn->code;
 	s16 off = insn->off;
@@ -699,7 +711,9 @@ int bpf_jit_emit_insn(const struct bpf_insn *insn, struct rv_jit_context *ctx,
 	/* JUMP off */
 	case BPF_JMP | BPF_JA:
 		rvoff = rv_offset(i, off, ctx);
-		emit_jump_and_link(RV_REG_ZERO, rvoff, false, ctx);
+		ret = emit_jump_and_link(RV_REG_ZERO, rvoff, false, ctx);
+		if (ret)
+			return ret;
 		break;
 
 	/* IF (dst COND src) JUMP off */
@@ -801,7 +815,6 @@ int bpf_jit_emit_insn(const struct bpf_insn *insn, struct rv_jit_context *ctx,
 	case BPF_JMP | BPF_CALL:
 	{
 		bool fixed;
-		int ret;
 		u64 addr;
 
 		mark_call(ctx);
@@ -826,7 +839,9 @@ int bpf_jit_emit_insn(const struct bpf_insn *insn, struct rv_jit_context *ctx,
 			break;
 
 		rvoff = epilogue_offset(ctx);
-		emit_jump_and_link(RV_REG_ZERO, rvoff, false, ctx);
+		ret = emit_jump_and_link(RV_REG_ZERO, rvoff, false, ctx);
+		if (ret)
+			return ret;
 		break;
 
 	/* dst = imm64 */
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 59c216a..2167bce 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -102,13 +102,13 @@
 	select ARCH_INLINE_WRITE_UNLOCK_IRQ
 	select ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE
 	select ARCH_KEEP_MEMBLOCK
-	select ARCH_SAVE_PAGE_KEYS if HIBERNATION
 	select ARCH_STACKWALK
 	select ARCH_SUPPORTS_ATOMIC_RMW
 	select ARCH_SUPPORTS_NUMA_BALANCING
 	select ARCH_USE_BUILTIN_BSWAP
 	select ARCH_USE_CMPXCHG_LOCKREF
 	select ARCH_WANTS_DYNAMIC_TASK_STRUCT
+	select ARCH_WANT_DEFAULT_BPF_JIT
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select BUILDTIME_TABLE_SORT
 	select CLONE_BACKWARDS2
@@ -451,14 +451,6 @@
 config HOTPLUG_CPU
 	def_bool y
 
-# Some NUMA nodes have memory ranges that span
-# other nodes.	Even though a pfn is valid and
-# between a node's start and end pfns, it may not
-# reside on that node.	See memmap_init_zone()
-# for details. <- They meant memory holes!
-config NODES_SPAN_OTHER_NODES
-	def_bool NUMA
-
 config NUMA
 	bool "NUMA support"
 	depends on SCHED_TOPOLOGY
@@ -468,58 +460,9 @@
 
 	  This option adds NUMA support to the kernel.
 
-	  An operation mode can be selected by appending
-	  numa=<method> to the kernel command line.
-
-	  The default behaviour is identical to appending numa=plain to
-	  the command line. This will create just one node with all
-	  available memory and all CPUs in it.
-
 config NODES_SHIFT
-	int "Maximum NUMA nodes (as a power of 2)"
-	range 1 10
-	depends on NUMA
-	default "4"
-	help
-	  Specify the maximum number of NUMA nodes available on the target
-	  system. Increases memory reserved to accommodate various tables.
-
-menu "Select NUMA modes"
-	depends on NUMA
-
-config NUMA_EMU
-	bool "NUMA emulation"
-	default y
-	help
-	  Numa emulation mode will split the available system memory into
-	  equal chunks which then are distributed over the configured number
-	  of nodes in a round-robin manner.
-
-	  The number of fake nodes is limited by the number of available memory
-	  chunks (i.e. memory size / fake size) and the number of supported
-	  nodes in the kernel.
-
-	  The CPUs are assigned to the nodes in a way that partially respects
-	  the original machine topology (if supported by the machine).
-	  Fair distribution of the CPUs is not guaranteed.
-
-config EMU_SIZE
-	hex "NUMA emulation memory chunk size"
-	default 0x10000000
-	range 0x400000 0x100000000
-	depends on NUMA_EMU
-	help
-	  Select the default size by which the memory is chopped and then
-	  assigned to emulated NUMA nodes.
-
-	  This can be overridden by specifying
-
-	  emu_size=<n>
-
-	  on the kernel command line where also suffixes K, M, G, and T are
-	  supported.
-
-endmenu
+	int
+	default "1"
 
 config SCHED_SMT
 	def_bool n
@@ -867,15 +810,6 @@
 
 	  If unsure, say Y.
 
-menu "Power Management"
-
-config ARCH_HIBERNATION_POSSIBLE
-	def_bool y
-
-source "kernel/power/Kconfig"
-
-endmenu
-
 config CCW
 	def_bool y
 
@@ -1010,7 +944,6 @@
 	select TTY
 	select VIRTUALIZATION
 	select VIRTIO
-	select VIRTIO_CONSOLE
 	help
 	  Enabling this option adds support for virtio based paravirtual device
 	  drivers on s390.
diff --git a/arch/s390/appldata/appldata_os.c b/arch/s390/appldata/appldata_os.c
index 54f3756..8bf46d7 100644
--- a/arch/s390/appldata/appldata_os.c
+++ b/arch/s390/appldata/appldata_os.c
@@ -75,7 +75,7 @@ struct appldata_os_data {
 				   (waiting for I/O)               */
 
 	/* per cpu data */
-	struct appldata_os_per_cpu os_cpu[0];
+	struct appldata_os_per_cpu os_cpu[];
 } __attribute__((packed));
 
 static struct appldata_os_data *appldata_os_data;
diff --git a/arch/s390/boot/.gitignore b/arch/s390/boot/.gitignore
index 16ff906..b265bfe 100644
--- a/arch/s390/boot/.gitignore
+++ b/arch/s390/boot/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 image
 bzImage
 section_cmp.*
diff --git a/arch/s390/boot/compressed/.gitignore b/arch/s390/boot/compressed/.gitignore
index e72fcd7..765a08f 100644
--- a/arch/s390/boot/compressed/.gitignore
+++ b/arch/s390/boot/compressed/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 vmlinux
 vmlinux.lds
diff --git a/arch/s390/boot/install.sh b/arch/s390/boot/install.sh
index bed227f..515b27a 100644
--- a/arch/s390/boot/install.sh
+++ b/arch/s390/boot/install.sh
@@ -21,15 +21,10 @@
 if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
 if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
 
-# Default install - same as make zlilo
+echo "Warning: '${INSTALLKERNEL}' command not available - additional " \
+     "bootloader config required" >&2
+if [ -f $4/vmlinuz-$1 ]; then mv $4/vmlinuz-$1 $4/vmlinuz-$1.old; fi
+if [ -f $4/System.map-$1 ]; then mv $4/System.map-$1 $4/System.map-$1.old; fi
 
-if [ -f $4/vmlinuz ]; then
-	mv $4/vmlinuz $4/vmlinuz.old
-fi
-
-if [ -f $4/System.map ]; then
-	mv $4/System.map $4/System.old
-fi
-
-cat $2 > $4/vmlinuz
-cp $3 $4/System.map
+cat $2 > $4/vmlinuz-$1
+cp $3 $4/System.map-$1
diff --git a/arch/s390/configs/debug_defconfig b/arch/s390/configs/debug_defconfig
index 0c86ba1..46038bc 100644
--- a/arch/s390/configs/debug_defconfig
+++ b/arch/s390/configs/debug_defconfig
@@ -532,6 +532,7 @@
 # CONFIG_SERIO is not set
 CONFIG_LEGACY_PTY_COUNT=0
 CONFIG_NULL_TTY=m
+CONFIG_VIRTIO_CONSOLE=y
 CONFIG_HW_RANDOM_VIRTIO=m
 CONFIG_RAW_DRIVER=m
 CONFIG_HANGCHECK_TIMER=m
diff --git a/arch/s390/configs/defconfig b/arch/s390/configs/defconfig
index 6b27d86..7cd0648 100644
--- a/arch/s390/configs/defconfig
+++ b/arch/s390/configs/defconfig
@@ -528,6 +528,7 @@
 # CONFIG_SERIO is not set
 CONFIG_LEGACY_PTY_COUNT=0
 CONFIG_NULL_TTY=m
+CONFIG_VIRTIO_CONSOLE=y
 CONFIG_HW_RANDOM_VIRTIO=m
 CONFIG_RAW_DRIVER=m
 CONFIG_HANGCHECK_TIMER=m
diff --git a/arch/s390/crypto/aes_s390.c b/arch/s390/crypto/aes_s390.c
index 1c23d84..73044634 100644
--- a/arch/s390/crypto/aes_s390.c
+++ b/arch/s390/crypto/aes_s390.c
@@ -342,6 +342,7 @@ static int cbc_aes_crypt(struct skcipher_request *req, unsigned long modifier)
 		memcpy(walk.iv, param.iv, AES_BLOCK_SIZE);
 		ret = skcipher_walk_done(&walk, nbytes - n);
 	}
+	memzero_explicit(&param, sizeof(param));
 	return ret;
 }
 
@@ -470,6 +471,8 @@ static int xts_aes_crypt(struct skcipher_request *req, unsigned long modifier)
 			 walk.dst.virt.addr, walk.src.virt.addr, n);
 		ret = skcipher_walk_done(&walk, nbytes - n);
 	}
+	memzero_explicit(&pcc_param, sizeof(pcc_param));
+	memzero_explicit(&xts_param, sizeof(xts_param));
 	return ret;
 }
 
diff --git a/arch/s390/include/asm/hw_irq.h b/arch/s390/include/asm/hw_irq.h
index adae176..9078b5b 100644
--- a/arch/s390/include/asm/hw_irq.h
+++ b/arch/s390/include/asm/hw_irq.h
@@ -7,6 +7,5 @@
 
 void __init init_airq_interrupts(void);
 void __init init_cio_interrupts(void);
-void __init init_ext_interrupts(void);
 
 #endif
diff --git a/arch/s390/include/asm/ipl.h b/arch/s390/include/asm/ipl.h
index 084e71b..b63bd66 100644
--- a/arch/s390/include/asm/ipl.h
+++ b/arch/s390/include/asm/ipl.h
@@ -119,6 +119,7 @@ enum diag308_subcode  {
 	DIAG308_LOAD_NORMAL_DUMP = 4,
 	DIAG308_SET = 5,
 	DIAG308_STORE = 6,
+	DIAG308_LOAD_NORMAL = 7,
 };
 
 enum diag308_rc {
diff --git a/arch/s390/include/asm/lowcore.h b/arch/s390/include/asm/lowcore.h
index 237ee0c..612ed3c 100644
--- a/arch/s390/include/asm/lowcore.h
+++ b/arch/s390/include/asm/lowcore.h
@@ -141,7 +141,9 @@ struct lowcore {
 
 	/* br %r1 trampoline */
 	__u16	br_r1_trampoline;		/* 0x0400 */
-	__u8	pad_0x0402[0x0e00-0x0402];	/* 0x0402 */
+	__u32	return_lpswe;			/* 0x0402 */
+	__u32	return_mcck_lpswe;		/* 0x0406 */
+	__u8	pad_0x040a[0x0e00-0x040a];	/* 0x040a */
 
 	/*
 	 * 0xe00 contains the address of the IPL Parameter Information
diff --git a/arch/s390/include/asm/mmu.h b/arch/s390/include/asm/mmu.h
index e21b618..e12ff0f 100644
--- a/arch/s390/include/asm/mmu.h
+++ b/arch/s390/include/asm/mmu.h
@@ -34,8 +34,6 @@ typedef struct {
 	unsigned int uses_cmm:1;
 	/* The gmaps associated with this context are allowed to use huge pages. */
 	unsigned int allow_gmap_hpage_1m:1;
-	/* The mmu context is for compat task */
-	unsigned int compat_mm:1;
 } mm_context_t;
 
 #define INIT_MM_CONTEXT(name)						   \
diff --git a/arch/s390/include/asm/mmu_context.h b/arch/s390/include/asm/mmu_context.h
index afa8360..c9f3d8a 100644
--- a/arch/s390/include/asm/mmu_context.h
+++ b/arch/s390/include/asm/mmu_context.h
@@ -18,6 +18,8 @@
 static inline int init_new_context(struct task_struct *tsk,
 				   struct mm_struct *mm)
 {
+	unsigned long asce_type, init_entry;
+
 	spin_lock_init(&mm->context.lock);
 	INIT_LIST_HEAD(&mm->context.pgtable_list);
 	INIT_LIST_HEAD(&mm->context.gmap_list);
@@ -26,7 +28,6 @@ static inline int init_new_context(struct task_struct *tsk,
 	atomic_set(&mm->context.is_protected, 0);
 	mm->context.gmap_asce = 0;
 	mm->context.flush_mm = 0;
-	mm->context.compat_mm = test_thread_flag(TIF_31BIT);
 #ifdef CONFIG_PGSTE
 	mm->context.alloc_pgste = page_table_allocate_pgste ||
 		test_thread_flag(TIF_PGSTE) ||
@@ -37,33 +38,34 @@ static inline int init_new_context(struct task_struct *tsk,
 	mm->context.allow_gmap_hpage_1m = 0;
 #endif
 	switch (mm->context.asce_limit) {
-	case _REGION2_SIZE:
+	default:
 		/*
-		 * forked 3-level task, fall through to set new asce with new
-		 * mm->pgd
+		 * context created by exec, the value of asce_limit can
+		 * only be zero in this case
 		 */
-	case 0:
-		/* context created by exec, set asce limit to 4TB */
-		mm->context.asce_limit = STACK_TOP_MAX;
-		mm->context.asce = __pa(mm->pgd) | _ASCE_TABLE_LENGTH |
-				   _ASCE_USER_BITS | _ASCE_TYPE_REGION3;
+		VM_BUG_ON(mm->context.asce_limit);
+		/* continue as 3-level task */
+		mm->context.asce_limit = _REGION2_SIZE;
+		fallthrough;
+	case _REGION2_SIZE:
+		/* forked 3-level task */
+		init_entry = _REGION3_ENTRY_EMPTY;
+		asce_type = _ASCE_TYPE_REGION3;
 		break;
-	case -PAGE_SIZE:
-		/* forked 5-level task, set new asce with new_mm->pgd */
-		mm->context.asce = __pa(mm->pgd) | _ASCE_TABLE_LENGTH |
-			_ASCE_USER_BITS | _ASCE_TYPE_REGION1;
+	case TASK_SIZE_MAX:
+		/* forked 5-level task */
+		init_entry = _REGION1_ENTRY_EMPTY;
+		asce_type = _ASCE_TYPE_REGION1;
 		break;
 	case _REGION1_SIZE:
-		/* forked 4-level task, set new asce with new mm->pgd */
-		mm->context.asce = __pa(mm->pgd) | _ASCE_TABLE_LENGTH |
-				   _ASCE_USER_BITS | _ASCE_TYPE_REGION2;
+		/* forked 4-level task */
+		init_entry = _REGION2_ENTRY_EMPTY;
+		asce_type = _ASCE_TYPE_REGION2;
 		break;
-	case _REGION3_SIZE:
-		/* forked 2-level compat task, set new asce with new mm->pgd */
-		mm->context.asce = __pa(mm->pgd) | _ASCE_TABLE_LENGTH |
-				   _ASCE_USER_BITS | _ASCE_TYPE_SEGMENT;
 	}
-	crst_table_init((unsigned long *) mm->pgd, pgd_entry_type(mm));
+	mm->context.asce = __pa(mm->pgd) | _ASCE_TABLE_LENGTH |
+			   _ASCE_USER_BITS | asce_type;
+	crst_table_init((unsigned long *) mm->pgd, init_entry);
 	return 0;
 }
 
diff --git a/arch/s390/include/asm/numa.h b/arch/s390/include/asm/numa.h
index 35f8cbe..23cd5d1 100644
--- a/arch/s390/include/asm/numa.h
+++ b/arch/s390/include/asm/numa.h
@@ -13,24 +13,13 @@
 #ifdef CONFIG_NUMA
 
 #include <linux/numa.h>
-#include <linux/cpumask.h>
 
 void numa_setup(void);
-int numa_pfn_to_nid(unsigned long pfn);
-int __node_distance(int a, int b);
-void numa_update_cpu_topology(void);
-
-extern cpumask_t node_to_cpumask_map[MAX_NUMNODES];
-extern int numa_debug_enabled;
 
 #else
 
 static inline void numa_setup(void) { }
-static inline void numa_update_cpu_topology(void) { }
-static inline int numa_pfn_to_nid(unsigned long pfn)
-{
-	return 0;
-}
 
 #endif /* CONFIG_NUMA */
+
 #endif /* _ASM_S390_NUMA_H */
diff --git a/arch/s390/include/asm/page.h b/arch/s390/include/asm/page.h
index 62440a8..cc98f9b 100644
--- a/arch/s390/include/asm/page.h
+++ b/arch/s390/include/asm/page.h
@@ -166,23 +166,22 @@ int arch_make_page_accessible(struct page *page);
 #define __pa(x)			((unsigned long)(x))
 #define __va(x)			((void *)(unsigned long)(x))
 
-#define virt_to_pfn(kaddr)	(__pa(kaddr) >> PAGE_SHIFT)
-#define pfn_to_virt(pfn)	__va((pfn) << PAGE_SHIFT)
+#define phys_to_pfn(phys)	((phys) >> PAGE_SHIFT)
+#define pfn_to_phys(pfn)	((pfn) << PAGE_SHIFT)
+
+#define phys_to_page(phys)	pfn_to_page(phys_to_pfn(phys))
+#define page_to_phys(page)	pfn_to_phys(page_to_pfn(page))
+
+#define pfn_to_virt(pfn)	__va(pfn_to_phys(pfn))
+#define virt_to_pfn(kaddr)	(phys_to_pfn(__pa(kaddr)))
 #define pfn_to_kaddr(pfn)	pfn_to_virt(pfn)
 
 #define virt_to_page(kaddr)	pfn_to_page(virt_to_pfn(kaddr))
 #define page_to_virt(page)	pfn_to_virt(page_to_pfn(page))
 
-#define phys_to_pfn(kaddr)	((kaddr) >> PAGE_SHIFT)
-#define pfn_to_phys(pfn)	((pfn) << PAGE_SHIFT)
+#define virt_addr_valid(kaddr)	pfn_valid(virt_to_pfn(kaddr))
 
-#define phys_to_page(kaddr)	pfn_to_page(phys_to_pfn(kaddr))
-#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
-
-#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
-
-#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | \
-				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+#define VM_DATA_DEFAULT_FLAGS	VM_DATA_FLAGS_NON_EXEC
 
 #include <asm-generic/memory_model.h>
 #include <asm-generic/getorder.h>
diff --git a/arch/s390/include/asm/pci.h b/arch/s390/include/asm/pci.h
index b05187c..7485ee5 100644
--- a/arch/s390/include/asm/pci.h
+++ b/arch/s390/include/asm/pci.h
@@ -5,6 +5,7 @@
 #include <linux/pci.h>
 #include <linux/mutex.h>
 #include <linux/iommu.h>
+#include <linux/pci_hotplug.h>
 #include <asm-generic/pci.h>
 #include <asm/pci_clp.h>
 #include <asm/pci_debug.h>
@@ -25,6 +26,7 @@ int pci_proc_domain(struct pci_bus *);
 
 #define ZPCI_NR_DMA_SPACES		1
 #define ZPCI_NR_DEVICES			CONFIG_PCI_NR_FUNCTIONS
+#define ZPCI_DOMAIN_BITMAP_SIZE		(1 << 16)
 
 /* PCI Function Controls */
 #define ZPCI_FC_FN_ENABLED		0x80
@@ -96,6 +98,7 @@ struct s390_domain;
 struct zpci_dev {
 	struct pci_bus	*bus;
 	struct list_head entry;		/* list of all zpci_devices, needed for hotplug, etc. */
+	struct hotplug_slot hotplug_slot;
 
 	enum zpci_state state;
 	u32		fid;		/* function ID, used by sclp */
@@ -186,6 +189,9 @@ int clp_enable_fh(struct zpci_dev *, u8);
 int clp_disable_fh(struct zpci_dev *);
 int clp_get_state(u32 fid, enum zpci_state *state);
 
+/* UID */
+void update_uid_checking(bool new);
+
 /* IOMMU Interface */
 int zpci_init_iommu(struct zpci_dev *zdev);
 void zpci_destroy_iommu(struct zpci_dev *zdev);
diff --git a/arch/s390/include/asm/pgalloc.h b/arch/s390/include/asm/pgalloc.h
index 77606c4..74a352f 100644
--- a/arch/s390/include/asm/pgalloc.h
+++ b/arch/s390/include/asm/pgalloc.h
@@ -34,19 +34,21 @@ static inline void crst_table_init(unsigned long *crst, unsigned long entry)
 	memset64((u64 *)crst, entry, _CRST_ENTRIES);
 }
 
-static inline unsigned long pgd_entry_type(struct mm_struct *mm)
-{
-	if (mm_pmd_folded(mm))
-		return _SEGMENT_ENTRY_EMPTY;
-	if (mm_pud_folded(mm))
-		return _REGION3_ENTRY_EMPTY;
-	if (mm_p4d_folded(mm))
-		return _REGION2_ENTRY_EMPTY;
-	return _REGION1_ENTRY_EMPTY;
-}
-
 int crst_table_upgrade(struct mm_struct *mm, unsigned long limit);
-void crst_table_downgrade(struct mm_struct *);
+
+static inline unsigned long check_asce_limit(struct mm_struct *mm, unsigned long addr,
+					     unsigned long len)
+{
+	int rc;
+
+	if (addr + len > mm->context.asce_limit &&
+	    addr + len <= TASK_SIZE) {
+		rc = crst_table_upgrade(mm, addr + len);
+		if (rc)
+			return (unsigned long) rc;
+	}
+	return addr;
+}
 
 static inline p4d_t *p4d_alloc_one(struct mm_struct *mm, unsigned long address)
 {
@@ -116,24 +118,11 @@ static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
 
 static inline pgd_t *pgd_alloc(struct mm_struct *mm)
 {
-	unsigned long *table = crst_table_alloc(mm);
-
-	if (!table)
-		return NULL;
-	if (mm->context.asce_limit == _REGION3_SIZE) {
-		/* Forking a compat process with 2 page table levels */
-		if (!pgtable_pmd_page_ctor(virt_to_page(table))) {
-			crst_table_free(mm, table);
-			return NULL;
-		}
-	}
-	return (pgd_t *) table;
+	return (pgd_t *) crst_table_alloc(mm);
 }
 
 static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
 {
-	if (mm->context.asce_limit == _REGION3_SIZE)
-		pgtable_pmd_page_dtor(virt_to_page(pgd));
 	crst_table_free(mm, (unsigned long *) pgd);
 }
 
diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h
index aadb3d0..555d148 100644
--- a/arch/s390/include/asm/processor.h
+++ b/arch/s390/include/asm/processor.h
@@ -92,15 +92,15 @@ extern void __bpon(void);
  */
 
 #define TASK_SIZE_OF(tsk)	(test_tsk_thread_flag(tsk, TIF_31BIT) ? \
-					(1UL << 31) : -PAGE_SIZE)
+					_REGION3_SIZE : TASK_SIZE_MAX)
 #define TASK_UNMAPPED_BASE	(test_thread_flag(TIF_31BIT) ? \
-					(1UL << 30) : (1UL << 41))
+					(_REGION3_SIZE >> 1) : (_REGION2_SIZE >> 1))
 #define TASK_SIZE		TASK_SIZE_OF(current)
 #define TASK_SIZE_MAX		(-PAGE_SIZE)
 
 #define STACK_TOP		(test_thread_flag(TIF_31BIT) ? \
-					(1UL << 31) : (1UL << 42))
-#define STACK_TOP_MAX		(1UL << 42)
+					_REGION3_SIZE : _REGION2_SIZE)
+#define STACK_TOP_MAX		_REGION2_SIZE
 
 #define HAVE_ARCH_PICK_MMAP_LAYOUT
 
@@ -161,6 +161,7 @@ typedef struct thread_struct thread_struct;
 #define INIT_THREAD {							\
 	.ksp = sizeof(init_stack) + (unsigned long) &init_stack,	\
 	.fpu.regs = (void *) init_task.thread.fpu.fprs,			\
+	.last_break = 1,						\
 }
 
 /*
@@ -177,7 +178,6 @@ typedef struct thread_struct thread_struct;
 	regs->psw.mask	= PSW_USER_BITS | PSW_MASK_BA;			\
 	regs->psw.addr	= new_psw;					\
 	regs->gprs[15]	= new_stackp;					\
-	crst_table_downgrade(current->mm);				\
 	execve_tail();							\
 } while (0)
 
diff --git a/arch/s390/include/asm/qdio.h b/arch/s390/include/asm/qdio.h
index e577f85..86a3796 100644
--- a/arch/s390/include/asm/qdio.h
+++ b/arch/s390/include/asm/qdio.h
@@ -325,7 +325,6 @@ typedef void qdio_handler_t(struct ccw_device *, unsigned int, int,
 
 /**
  * struct qdio_initialize - qdio initialization data
- * @cdev: associated ccw device
  * @q_format: queue format
  * @qdr_ac: feature flags to set
  * @adapter_name: name for the adapter
@@ -341,12 +340,11 @@ typedef void qdio_handler_t(struct ccw_device *, unsigned int, int,
  * @irq_poll: Data IRQ polling handler (NULL when not supported)
  * @scan_threshold: # of in-use buffers that triggers scan on output queue
  * @int_parm: interruption parameter
- * @input_sbal_addr_array:  address of no_input_qs * 128 pointers
- * @output_sbal_addr_array: address of no_output_qs * 128 pointers
+ * @input_sbal_addr_array:  per-queue array, each element points to 128 SBALs
+ * @output_sbal_addr_array: per-queue array, each element points to 128 SBALs
  * @output_sbal_state_array: no_output_qs * 128 state info (for CQ or NULL)
  */
 struct qdio_initialize {
-	struct ccw_device *cdev;
 	unsigned char q_format;
 	unsigned char qdr_ac;
 	unsigned char adapter_name[8];
@@ -362,8 +360,8 @@ struct qdio_initialize {
 	void (*irq_poll)(struct ccw_device *cdev, unsigned long data);
 	unsigned int scan_threshold;
 	unsigned long int_parm;
-	struct qdio_buffer **input_sbal_addr_array;
-	struct qdio_buffer **output_sbal_addr_array;
+	struct qdio_buffer ***input_sbal_addr_array;
+	struct qdio_buffer ***output_sbal_addr_array;
 	struct qdio_outbuf_state *output_sbal_state_array;
 };
 
@@ -408,8 +406,10 @@ int qdio_alloc_buffers(struct qdio_buffer **buf, unsigned int count);
 void qdio_free_buffers(struct qdio_buffer **buf, unsigned int count);
 void qdio_reset_buffers(struct qdio_buffer **buf, unsigned int count);
 
-extern int qdio_allocate(struct qdio_initialize *);
-extern int qdio_establish(struct qdio_initialize *);
+extern int qdio_allocate(struct ccw_device *cdev, unsigned int no_input_qs,
+			 unsigned int no_output_qs);
+extern int qdio_establish(struct ccw_device *cdev,
+			  struct qdio_initialize *init_data);
 extern int qdio_activate(struct ccw_device *);
 extern void qdio_release_aob(struct qaob *);
 extern int do_QDIO(struct ccw_device *, unsigned int, int, unsigned int,
diff --git a/arch/s390/include/asm/setup.h b/arch/s390/include/asm/setup.h
index b241ddb..534f212 100644
--- a/arch/s390/include/asm/setup.h
+++ b/arch/s390/include/asm/setup.h
@@ -8,6 +8,7 @@
 
 #include <linux/bits.h>
 #include <uapi/asm/setup.h>
+#include <linux/build_bug.h>
 
 #define EP_OFFSET		0x10008
 #define EP_STRING		"S390EP"
@@ -162,6 +163,12 @@ static inline unsigned long kaslr_offset(void)
 	return __kaslr_offset;
 }
 
+static inline u32 gen_lpswe(unsigned long addr)
+{
+	BUILD_BUG_ON(addr > 0xfff);
+	return 0xb2b20000 | addr;
+}
+
 #else /* __ASSEMBLY__ */
 
 #define IPL_DEVICE	(IPL_DEVICE_OFFSET)
diff --git a/arch/s390/include/asm/smp.h b/arch/s390/include/asm/smp.h
index b157a81..231a51e 100644
--- a/arch/s390/include/asm/smp.h
+++ b/arch/s390/include/asm/smp.h
@@ -34,6 +34,7 @@ extern int smp_vcpu_scheduled(int cpu);
 extern void smp_yield_cpu(int cpu);
 extern void smp_cpu_set_polarization(int cpu, int val);
 extern int smp_cpu_get_polarization(int cpu);
+extern int smp_cpu_get_cpu_address(int cpu);
 extern void smp_fill_possible_mask(void);
 extern void smp_detect_cpus(void);
 
diff --git a/arch/s390/include/asm/topology.h b/arch/s390/include/asm/topology.h
index cca406f..fbb5075 100644
--- a/arch/s390/include/asm/topology.h
+++ b/arch/s390/include/asm/topology.h
@@ -16,8 +16,8 @@ struct cpu_topology_s390 {
 	unsigned short socket_id;
 	unsigned short book_id;
 	unsigned short drawer_id;
-	unsigned short node_id;
 	unsigned short dedicated : 1;
+	int booted_cores;
 	cpumask_t thread_mask;
 	cpumask_t core_mask;
 	cpumask_t book_mask;
@@ -25,7 +25,6 @@ struct cpu_topology_s390 {
 };
 
 extern struct cpu_topology_s390 cpu_topology[NR_CPUS];
-extern cpumask_t cpus_with_topology;
 
 #define topology_physical_package_id(cpu) (cpu_topology[cpu].socket_id)
 #define topology_thread_id(cpu)		  (cpu_topology[cpu].thread_id)
@@ -37,6 +36,7 @@ extern cpumask_t cpus_with_topology;
 #define topology_drawer_id(cpu)		  (cpu_topology[cpu].drawer_id)
 #define topology_drawer_cpumask(cpu)	  (&cpu_topology[cpu].drawer_mask)
 #define topology_cpu_dedicated(cpu)	  (cpu_topology[cpu].dedicated)
+#define topology_booted_cores(cpu)	  (cpu_topology[cpu].booted_cores)
 
 #define mc_capable() 1
 
@@ -45,6 +45,7 @@ int topology_cpu_init(struct cpu *);
 int topology_set_cpu_management(int fc);
 void topology_schedule_update(void);
 void store_topology(struct sysinfo_15_1_x *info);
+void update_cpu_masks(void);
 void topology_expect_change(void);
 const struct cpumask *cpu_coregroup_mask(int cpu);
 
@@ -54,6 +55,8 @@ static inline void topology_init_early(void) { }
 static inline void topology_schedule_update(void) { }
 static inline int topology_cpu_init(struct cpu *cpu) { return 0; }
 static inline int topology_cpu_dedicated(int cpu_nr) { return 0; }
+static inline int topology_booted_cores(int cpu_nr) { return 1; }
+static inline void update_cpu_masks(void) { }
 static inline void topology_expect_change(void) { }
 
 #endif /* CONFIG_SCHED_TOPOLOGY */
@@ -71,19 +74,23 @@ static inline void topology_expect_change(void) { }
 #define cpu_to_node cpu_to_node
 static inline int cpu_to_node(int cpu)
 {
-	return cpu_topology[cpu].node_id;
+	return 0;
 }
 
 /* Returns a pointer to the cpumask of CPUs on node 'node'. */
 #define cpumask_of_node cpumask_of_node
 static inline const struct cpumask *cpumask_of_node(int node)
 {
-	return &node_to_cpumask_map[node];
+	return cpu_possible_mask;
 }
 
 #define pcibus_to_node(bus) __pcibus_to_node(bus)
 
 #define node_distance(a, b) __node_distance(a, b)
+static inline int __node_distance(int a, int b)
+{
+	return 0;
+}
 
 #else /* !CONFIG_NUMA */
 
diff --git a/arch/s390/kernel/.gitignore b/arch/s390/kernel/.gitignore
index c5f676c..bbb90f9 100644
--- a/arch/s390/kernel/.gitignore
+++ b/arch/s390/kernel/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 vmlinux.lds
diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile
index 33d4de2..75f26d7 100644
--- a/arch/s390/kernel/Makefile
+++ b/arch/s390/kernel/Makefile
@@ -54,7 +54,6 @@
 
 obj-$(CONFIG_MODULES)		+= module.o
 obj-$(CONFIG_SCHED_TOPOLOGY)	+= topology.o
-obj-$(CONFIG_HIBERNATION)	+= suspend.o swsusp.o
 obj-$(CONFIG_AUDIT)		+= audit.o
 compat-obj-$(CONFIG_AUDIT)	+= compat_audit.o
 obj-$(CONFIG_COMPAT)		+= compat_linux.o compat_signal.o
diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c
index ce33406..e80f0e6 100644
--- a/arch/s390/kernel/asm-offsets.c
+++ b/arch/s390/kernel/asm-offsets.c
@@ -124,6 +124,8 @@ int main(void)
 	OFFSET(__LC_EXT_DAMAGE_CODE, lowcore, external_damage_code);
 	OFFSET(__LC_MCCK_FAIL_STOR_ADDR, lowcore, failing_storage_address);
 	OFFSET(__LC_LAST_BREAK, lowcore, breaking_event_addr);
+	OFFSET(__LC_RETURN_LPSWE, lowcore, return_lpswe);
+	OFFSET(__LC_RETURN_MCCK_LPSWE, lowcore, return_mcck_lpswe);
 	OFFSET(__LC_RST_OLD_PSW, lowcore, restart_old_psw);
 	OFFSET(__LC_EXT_OLD_PSW, lowcore, external_old_psw);
 	OFFSET(__LC_SVC_OLD_PSW, lowcore, svc_old_psw);
diff --git a/arch/s390/kernel/diag.c b/arch/s390/kernel/diag.c
index e9dac9a..61f2b04 100644
--- a/arch/s390/kernel/diag.c
+++ b/arch/s390/kernel/diag.c
@@ -84,7 +84,7 @@ static int show_diag_stat(struct seq_file *m, void *v)
 
 static void *show_diag_stat_start(struct seq_file *m, loff_t *pos)
 {
-	return *pos <= nr_cpu_ids ? (void *)((unsigned long) *pos + 1) : NULL;
+	return *pos <= NR_DIAG_STAT ? (void *)((unsigned long) *pos + 1) : NULL;
 }
 
 static void *show_diag_stat_next(struct seq_file *m, void *v, loff_t *pos)
diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
index 9205add..3ae6491 100644
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@@ -115,26 +115,29 @@
 
 	.macro	SWITCH_ASYNC savearea,timer
 	tmhh	%r8,0x0001		# interrupting from user ?
-	jnz	1f
+	jnz	2f
 	lgr	%r14,%r9
+	cghi	%r14,__LC_RETURN_LPSWE
+	je	0f
 	slg	%r14,BASED(.Lcritical_start)
 	clg	%r14,BASED(.Lcritical_length)
-	jhe	0f
+	jhe	1f
+0:
 	lghi	%r11,\savearea		# inside critical section, do cleanup
 	brasl	%r14,cleanup_critical
 	tmhh	%r8,0x0001		# retest problem state after cleanup
-	jnz	1f
-0:	lg	%r14,__LC_ASYNC_STACK	# are we already on the target stack?
+	jnz	2f
+1:	lg	%r14,__LC_ASYNC_STACK	# are we already on the target stack?
 	slgr	%r14,%r15
 	srag	%r14,%r14,STACK_SHIFT
-	jnz	2f
+	jnz	3f
 	CHECK_STACK \savearea
 	aghi	%r15,-(STACK_FRAME_OVERHEAD + __PT_SIZE)
-	j	3f
-1:	UPDATE_VTIME %r14,%r15,\timer
+	j	4f
+2:	UPDATE_VTIME %r14,%r15,\timer
 	BPENTER __TI_flags(%r12),_TIF_ISOLATE_BP
-2:	lg	%r15,__LC_ASYNC_STACK	# load async stack
-3:	la	%r11,STACK_FRAME_OVERHEAD(%r15)
+3:	lg	%r15,__LC_ASYNC_STACK	# load async stack
+4:	la	%r11,STACK_FRAME_OVERHEAD(%r15)
 	.endm
 
 	.macro UPDATE_VTIME w1,w2,enter_timer
@@ -401,7 +404,7 @@
 	stpt	__LC_EXIT_TIMER
 	mvc	__VDSO_ECTG_BASE(16,%r14),__LC_EXIT_TIMER
 	lmg	%r11,%r15,__PT_R11(%r11)
-	lpswe	__LC_RETURN_PSW
+	b	__LC_RETURN_LPSWE(%r0)
 .Lsysc_done:
 
 #
@@ -608,43 +611,50 @@
 	BPOFF
 	stmg	%r8,%r15,__LC_SAVE_AREA_SYNC
 	lg	%r10,__LC_LAST_BREAK
-	lg	%r12,__LC_CURRENT
+	srag	%r11,%r10,12
+	jnz	0f
+	/* if __LC_LAST_BREAK is < 4096, it contains one of
+	 * the lpswe addresses in lowcore. Set it to 1 (initial state)
+	 * to prevent leaking that address to userspace.
+	 */
+	lghi	%r10,1
+0:	lg	%r12,__LC_CURRENT
 	lghi	%r11,0
 	larl	%r13,cleanup_critical
 	lmg	%r8,%r9,__LC_PGM_OLD_PSW
 	tmhh	%r8,0x0001		# test problem state bit
-	jnz	2f			# -> fault in user space
+	jnz	3f			# -> fault in user space
 #if IS_ENABLED(CONFIG_KVM)
 	# cleanup critical section for program checks in sie64a
 	lgr	%r14,%r9
 	slg	%r14,BASED(.Lsie_critical_start)
 	clg	%r14,BASED(.Lsie_critical_length)
-	jhe	0f
+	jhe	1f
 	lg	%r14,__SF_SIE_CONTROL(%r15)	# get control block pointer
 	ni	__SIE_PROG0C+3(%r14),0xfe	# no longer in SIE
 	lctlg	%c1,%c1,__LC_USER_ASCE		# load primary asce
 	larl	%r9,sie_exit			# skip forward to sie_exit
 	lghi	%r11,_PIF_GUEST_FAULT
 #endif
-0:	tmhh	%r8,0x4000		# PER bit set in old PSW ?
-	jnz	1f			# -> enabled, can't be a double fault
+1:	tmhh	%r8,0x4000		# PER bit set in old PSW ?
+	jnz	2f			# -> enabled, can't be a double fault
 	tm	__LC_PGM_ILC+3,0x80	# check for per exception
 	jnz	.Lpgm_svcper		# -> single stepped svc
-1:	CHECK_STACK __LC_SAVE_AREA_SYNC
+2:	CHECK_STACK __LC_SAVE_AREA_SYNC
 	aghi	%r15,-(STACK_FRAME_OVERHEAD + __PT_SIZE)
-	# CHECK_VMAP_STACK branches to stack_overflow or 4f
-	CHECK_VMAP_STACK __LC_SAVE_AREA_SYNC,4f
-2:	UPDATE_VTIME %r14,%r15,__LC_SYNC_ENTER_TIMER
+	# CHECK_VMAP_STACK branches to stack_overflow or 5f
+	CHECK_VMAP_STACK __LC_SAVE_AREA_SYNC,5f
+3:	UPDATE_VTIME %r14,%r15,__LC_SYNC_ENTER_TIMER
 	BPENTER __TI_flags(%r12),_TIF_ISOLATE_BP
 	lg	%r15,__LC_KERNEL_STACK
 	lgr	%r14,%r12
 	aghi	%r14,__TASK_thread	# pointer to thread_struct
 	lghi	%r13,__LC_PGM_TDB
 	tm	__LC_PGM_ILC+2,0x02	# check for transaction abort
-	jz	3f
+	jz	4f
 	mvc	__THREAD_trap_tdb(256,%r14),0(%r13)
-3:	stg	%r10,__THREAD_last_break(%r14)
-4:	lgr	%r13,%r11
+4:	stg	%r10,__THREAD_last_break(%r14)
+5:	lgr	%r13,%r11
 	la	%r11,STACK_FRAME_OVERHEAD(%r15)
 	stmg	%r0,%r7,__PT_R0(%r11)
 	# clear user controlled registers to prevent speculative use
@@ -663,14 +673,14 @@
 	stg	%r13,__PT_FLAGS(%r11)
 	stg	%r10,__PT_ARGS(%r11)
 	tm	__LC_PGM_ILC+3,0x80	# check for per exception
-	jz	5f
+	jz	6f
 	tmhh	%r8,0x0001		# kernel per event ?
 	jz	.Lpgm_kprobe
 	oi	__PT_FLAGS+7(%r11),_PIF_PER_TRAP
 	mvc	__THREAD_per_address(8,%r14),__LC_PER_ADDRESS
 	mvc	__THREAD_per_cause(2,%r14),__LC_PER_CODE
 	mvc	__THREAD_per_paid(1,%r14),__LC_PER_ACCESS_ID
-5:	REENABLE_IRQS
+6:	REENABLE_IRQS
 	xc	__SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
 	larl	%r1,pgm_check_table
 	llgh	%r10,__PT_INT_CODE+2(%r11)
@@ -775,7 +785,7 @@
 	mvc	__VDSO_ECTG_BASE(16,%r14),__LC_EXIT_TIMER
 .Lio_exit_kernel:
 	lmg	%r11,%r15,__PT_R11(%r11)
-	lpswe	__LC_RETURN_PSW
+	b	__LC_RETURN_LPSWE(%r0)
 .Lio_done:
 
 #
@@ -1214,7 +1224,7 @@
 	stpt	__LC_EXIT_TIMER
 	mvc	__VDSO_ECTG_BASE(16,%r14),__LC_EXIT_TIMER
 0:	lmg	%r11,%r15,__PT_R11(%r11)
-	lpswe	__LC_RETURN_MCCK_PSW
+	b	__LC_RETURN_MCCK_LPSWE
 
 .Lmcck_panic:
 	lg	%r15,__LC_NODAT_STACK
@@ -1271,6 +1281,8 @@
 #endif
 
 ENTRY(cleanup_critical)
+	cghi	%r9,__LC_RETURN_LPSWE
+	je	.Lcleanup_lpswe
 #if IS_ENABLED(CONFIG_KVM)
 	clg	%r9,BASED(.Lcleanup_table_sie)	# .Lsie_gmap
 	jl	0f
@@ -1424,6 +1436,7 @@
 	mvc	__LC_RETURN_PSW(16),__PT_PSW(%r9)
 	mvc	0(64,%r11),__PT_R8(%r9)
 	lmg	%r0,%r7,__PT_R0(%r9)
+.Lcleanup_lpswe:
 1:	lmg	%r8,%r9,__LC_RETURN_PSW
 	BR_EX	%r14,%r11
 .Lcleanup_sysc_restore_insn:
diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index 6837aff..4a71061 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -144,6 +144,9 @@ static struct ipl_parameter_block *dump_block_ccw;
 
 static struct sclp_ipl_info sclp_ipl_info;
 
+static bool reipl_fcp_clear;
+static bool reipl_ccw_clear;
+
 static inline int __diag308(unsigned long subcode, void *addr)
 {
 	register unsigned long _addr asm("0") = (unsigned long) addr;
@@ -691,6 +694,21 @@ static struct kobj_attribute sys_reipl_fcp_loadparm_attr =
 	__ATTR(loadparm, S_IRUGO | S_IWUSR, reipl_fcp_loadparm_show,
 					    reipl_fcp_loadparm_store);
 
+static ssize_t reipl_fcp_clear_show(struct kobject *kobj,
+				    struct kobj_attribute *attr, char *page)
+{
+	return sprintf(page, "%u\n", reipl_fcp_clear);
+}
+
+static ssize_t reipl_fcp_clear_store(struct kobject *kobj,
+				     struct kobj_attribute *attr,
+				     const char *buf, size_t len)
+{
+	if (strtobool(buf, &reipl_fcp_clear) < 0)
+		return -EINVAL;
+	return len;
+}
+
 static struct attribute *reipl_fcp_attrs[] = {
 	&sys_reipl_fcp_device_attr.attr,
 	&sys_reipl_fcp_wwpn_attr.attr,
@@ -706,6 +724,9 @@ static struct attribute_group reipl_fcp_attr_group = {
 	.bin_attrs = reipl_fcp_bin_attrs,
 };
 
+static struct kobj_attribute sys_reipl_fcp_clear_attr =
+	__ATTR(clear, 0644, reipl_fcp_clear_show, reipl_fcp_clear_store);
+
 /* CCW reipl device attributes */
 DEFINE_IPL_CCW_ATTR_RW(reipl_ccw, device, reipl_block_ccw->ccw);
 
@@ -741,16 +762,36 @@ static struct kobj_attribute sys_reipl_ccw_loadparm_attr =
 	__ATTR(loadparm, S_IRUGO | S_IWUSR, reipl_ccw_loadparm_show,
 					    reipl_ccw_loadparm_store);
 
+static ssize_t reipl_ccw_clear_show(struct kobject *kobj,
+				    struct kobj_attribute *attr, char *page)
+{
+	return sprintf(page, "%u\n", reipl_ccw_clear);
+}
+
+static ssize_t reipl_ccw_clear_store(struct kobject *kobj,
+				     struct kobj_attribute *attr,
+				     const char *buf, size_t len)
+{
+	if (strtobool(buf, &reipl_ccw_clear) < 0)
+		return -EINVAL;
+	return len;
+}
+
+static struct kobj_attribute sys_reipl_ccw_clear_attr =
+	__ATTR(clear, 0644, reipl_ccw_clear_show, reipl_ccw_clear_store);
+
 static struct attribute *reipl_ccw_attrs_vm[] = {
 	&sys_reipl_ccw_device_attr.attr,
 	&sys_reipl_ccw_loadparm_attr.attr,
 	&sys_reipl_ccw_vmparm_attr.attr,
+	&sys_reipl_ccw_clear_attr.attr,
 	NULL,
 };
 
 static struct attribute *reipl_ccw_attrs_lpar[] = {
 	&sys_reipl_ccw_device_attr.attr,
 	&sys_reipl_ccw_loadparm_attr.attr,
+	&sys_reipl_ccw_clear_attr.attr,
 	NULL,
 };
 
@@ -892,11 +933,17 @@ static void __reipl_run(void *unused)
 	switch (reipl_type) {
 	case IPL_TYPE_CCW:
 		diag308(DIAG308_SET, reipl_block_ccw);
-		diag308(DIAG308_LOAD_CLEAR, NULL);
+		if (reipl_ccw_clear)
+			diag308(DIAG308_LOAD_CLEAR, NULL);
+		else
+			diag308(DIAG308_LOAD_NORMAL_DUMP, NULL);
 		break;
 	case IPL_TYPE_FCP:
 		diag308(DIAG308_SET, reipl_block_fcp);
-		diag308(DIAG308_LOAD_CLEAR, NULL);
+		if (reipl_fcp_clear)
+			diag308(DIAG308_LOAD_CLEAR, NULL);
+		else
+			diag308(DIAG308_LOAD_NORMAL, NULL);
 		break;
 	case IPL_TYPE_NSS:
 		diag308(DIAG308_SET, reipl_block_nss);
@@ -1008,11 +1055,16 @@ static int __init reipl_fcp_init(void)
 	}
 
 	rc = sysfs_create_group(&reipl_fcp_kset->kobj, &reipl_fcp_attr_group);
-	if (rc) {
-		kset_unregister(reipl_fcp_kset);
-		free_page((unsigned long) reipl_block_fcp);
-		return rc;
-	}
+	if (rc)
+		goto out1;
+
+	if (test_facility(141)) {
+		rc = sysfs_create_file(&reipl_fcp_kset->kobj,
+				       &sys_reipl_fcp_clear_attr.attr);
+		if (rc)
+			goto out2;
+	} else
+		reipl_fcp_clear = true;
 
 	if (ipl_info.type == IPL_TYPE_FCP) {
 		memcpy(reipl_block_fcp, &ipl_block, sizeof(ipl_block));
@@ -1032,6 +1084,13 @@ static int __init reipl_fcp_init(void)
 	}
 	reipl_capabilities |= IPL_TYPE_FCP;
 	return 0;
+
+out2:
+	sysfs_remove_group(&reipl_fcp_kset->kobj, &reipl_fcp_attr_group);
+out1:
+	kset_unregister(reipl_fcp_kset);
+	free_page((unsigned long) reipl_block_fcp);
+	return rc;
 }
 
 static int __init reipl_type_init(void)
diff --git a/arch/s390/kernel/irq.c b/arch/s390/kernel/irq.c
index 8371855..3514420 100644
--- a/arch/s390/kernel/irq.c
+++ b/arch/s390/kernel/irq.c
@@ -95,14 +95,6 @@ static const struct irq_class irqclass_sub_desc[] = {
 	{.irq = CPU_RST,    .name = "RST", .desc = "[CPU] CPU Restart"},
 };
 
-void __init init_IRQ(void)
-{
-	BUILD_BUG_ON(ARRAY_SIZE(irqclass_sub_desc) != NR_ARCH_IRQS);
-	init_cio_interrupts();
-	init_airq_interrupts();
-	init_ext_interrupts();
-}
-
 void do_IRQ(struct pt_regs *regs, int irq)
 {
 	struct pt_regs *old_regs;
@@ -294,12 +286,7 @@ static irqreturn_t do_ext_interrupt(int irq, void *dummy)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction external_interrupt = {
-	.name	 = "EXT",
-	.handler = do_ext_interrupt,
-};
-
-void __init init_ext_interrupts(void)
+static void __init init_ext_interrupts(void)
 {
 	int idx;
 
@@ -308,7 +295,16 @@ void __init init_ext_interrupts(void)
 
 	irq_set_chip_and_handler(EXT_INTERRUPT,
 				 &dummy_irq_chip, handle_percpu_irq);
-	setup_irq(EXT_INTERRUPT, &external_interrupt);
+	if (request_irq(EXT_INTERRUPT, do_ext_interrupt, 0, "EXT", NULL))
+		panic("Failed to register EXT interrupt\n");
+}
+
+void __init init_IRQ(void)
+{
+	BUILD_BUG_ON(ARRAY_SIZE(irqclass_sub_desc) != NR_ARCH_IRQS);
+	init_cio_interrupts();
+	init_airq_interrupts();
+	init_ext_interrupts();
 }
 
 static DEFINE_SPINLOCK(irq_subclass_lock);
diff --git a/arch/s390/kernel/machine_kexec.c b/arch/s390/kernel/machine_kexec.c
index cb8b1cc..3a854cb 100644
--- a/arch/s390/kernel/machine_kexec.c
+++ b/arch/s390/kernel/machine_kexec.c
@@ -14,7 +14,6 @@
 #include <linux/reboot.h>
 #include <linux/ftrace.h>
 #include <linux/debug_locks.h>
-#include <linux/suspend.h>
 #include <asm/cio.h>
 #include <asm/setup.h>
 #include <asm/pgtable.h>
@@ -39,36 +38,6 @@ extern const unsigned long long relocate_kernel_len;
 #ifdef CONFIG_CRASH_DUMP
 
 /*
- * PM notifier callback for kdump
- */
-static int machine_kdump_pm_cb(struct notifier_block *nb, unsigned long action,
-			       void *ptr)
-{
-	switch (action) {
-	case PM_SUSPEND_PREPARE:
-	case PM_HIBERNATION_PREPARE:
-		if (kexec_crash_image)
-			arch_kexec_unprotect_crashkres();
-		break;
-	case PM_POST_SUSPEND:
-	case PM_POST_HIBERNATION:
-		if (kexec_crash_image)
-			arch_kexec_protect_crashkres();
-		break;
-	default:
-		return NOTIFY_DONE;
-	}
-	return NOTIFY_OK;
-}
-
-static int __init machine_kdump_pm_init(void)
-{
-	pm_notifier(machine_kdump_pm_cb, 0);
-	return 0;
-}
-arch_initcall(machine_kdump_pm_init);
-
-/*
  * Reset the system, copy boot CPU registers to absolute zero,
  * and jump to the kdump image
  */
diff --git a/arch/s390/kernel/perf_cpum_cf_events.c b/arch/s390/kernel/perf_cpum_cf_events.c
index 8b33e03..1e3df52 100644
--- a/arch/s390/kernel/perf_cpum_cf_events.c
+++ b/arch/s390/kernel/perf_cpum_cf_events.c
@@ -238,6 +238,64 @@ CPUMF_EVENT_ATTR(cf_z14, TX_C_TABORT_SPECIAL, 0x00f5);
 CPUMF_EVENT_ATTR(cf_z14, MT_DIAG_CYCLES_ONE_THR_ACTIVE, 0x01c0);
 CPUMF_EVENT_ATTR(cf_z14, MT_DIAG_CYCLES_TWO_THR_ACTIVE, 0x01c1);
 
+CPUMF_EVENT_ATTR(cf_z15, L1D_RO_EXCL_WRITES, 0x0080);
+CPUMF_EVENT_ATTR(cf_z15, DTLB2_WRITES, 0x0081);
+CPUMF_EVENT_ATTR(cf_z15, DTLB2_MISSES, 0x0082);
+CPUMF_EVENT_ATTR(cf_z15, DTLB2_HPAGE_WRITES, 0x0083);
+CPUMF_EVENT_ATTR(cf_z15, DTLB2_GPAGE_WRITES, 0x0084);
+CPUMF_EVENT_ATTR(cf_z15, L1D_L2D_SOURCED_WRITES, 0x0085);
+CPUMF_EVENT_ATTR(cf_z15, ITLB2_WRITES, 0x0086);
+CPUMF_EVENT_ATTR(cf_z15, ITLB2_MISSES, 0x0087);
+CPUMF_EVENT_ATTR(cf_z15, L1I_L2I_SOURCED_WRITES, 0x0088);
+CPUMF_EVENT_ATTR(cf_z15, TLB2_PTE_WRITES, 0x0089);
+CPUMF_EVENT_ATTR(cf_z15, TLB2_CRSTE_WRITES, 0x008a);
+CPUMF_EVENT_ATTR(cf_z15, TLB2_ENGINES_BUSY, 0x008b);
+CPUMF_EVENT_ATTR(cf_z15, TX_C_TEND, 0x008c);
+CPUMF_EVENT_ATTR(cf_z15, TX_NC_TEND, 0x008d);
+CPUMF_EVENT_ATTR(cf_z15, L1C_TLB2_MISSES, 0x008f);
+CPUMF_EVENT_ATTR(cf_z15, L1D_ONCHIP_L3_SOURCED_WRITES, 0x0090);
+CPUMF_EVENT_ATTR(cf_z15, L1D_ONCHIP_MEMORY_SOURCED_WRITES, 0x0091);
+CPUMF_EVENT_ATTR(cf_z15, L1D_ONCHIP_L3_SOURCED_WRITES_IV, 0x0092);
+CPUMF_EVENT_ATTR(cf_z15, L1D_ONCLUSTER_L3_SOURCED_WRITES, 0x0093);
+CPUMF_EVENT_ATTR(cf_z15, L1D_ONCLUSTER_MEMORY_SOURCED_WRITES, 0x0094);
+CPUMF_EVENT_ATTR(cf_z15, L1D_ONCLUSTER_L3_SOURCED_WRITES_IV, 0x0095);
+CPUMF_EVENT_ATTR(cf_z15, L1D_OFFCLUSTER_L3_SOURCED_WRITES, 0x0096);
+CPUMF_EVENT_ATTR(cf_z15, L1D_OFFCLUSTER_MEMORY_SOURCED_WRITES, 0x0097);
+CPUMF_EVENT_ATTR(cf_z15, L1D_OFFCLUSTER_L3_SOURCED_WRITES_IV, 0x0098);
+CPUMF_EVENT_ATTR(cf_z15, L1D_OFFDRAWER_L3_SOURCED_WRITES, 0x0099);
+CPUMF_EVENT_ATTR(cf_z15, L1D_OFFDRAWER_MEMORY_SOURCED_WRITES, 0x009a);
+CPUMF_EVENT_ATTR(cf_z15, L1D_OFFDRAWER_L3_SOURCED_WRITES_IV, 0x009b);
+CPUMF_EVENT_ATTR(cf_z15, L1D_ONDRAWER_L4_SOURCED_WRITES, 0x009c);
+CPUMF_EVENT_ATTR(cf_z15, L1D_OFFDRAWER_L4_SOURCED_WRITES, 0x009d);
+CPUMF_EVENT_ATTR(cf_z15, L1D_ONCHIP_L3_SOURCED_WRITES_RO, 0x009e);
+CPUMF_EVENT_ATTR(cf_z15, L1I_ONCHIP_L3_SOURCED_WRITES, 0x00a2);
+CPUMF_EVENT_ATTR(cf_z15, L1I_ONCHIP_MEMORY_SOURCED_WRITES, 0x00a3);
+CPUMF_EVENT_ATTR(cf_z15, L1I_ONCHIP_L3_SOURCED_WRITES_IV, 0x00a4);
+CPUMF_EVENT_ATTR(cf_z15, L1I_ONCLUSTER_L3_SOURCED_WRITES, 0x00a5);
+CPUMF_EVENT_ATTR(cf_z15, L1I_ONCLUSTER_MEMORY_SOURCED_WRITES, 0x00a6);
+CPUMF_EVENT_ATTR(cf_z15, L1I_ONCLUSTER_L3_SOURCED_WRITES_IV, 0x00a7);
+CPUMF_EVENT_ATTR(cf_z15, L1I_OFFCLUSTER_L3_SOURCED_WRITES, 0x00a8);
+CPUMF_EVENT_ATTR(cf_z15, L1I_OFFCLUSTER_MEMORY_SOURCED_WRITES, 0x00a9);
+CPUMF_EVENT_ATTR(cf_z15, L1I_OFFCLUSTER_L3_SOURCED_WRITES_IV, 0x00aa);
+CPUMF_EVENT_ATTR(cf_z15, L1I_OFFDRAWER_L3_SOURCED_WRITES, 0x00ab);
+CPUMF_EVENT_ATTR(cf_z15, L1I_OFFDRAWER_MEMORY_SOURCED_WRITES, 0x00ac);
+CPUMF_EVENT_ATTR(cf_z15, L1I_OFFDRAWER_L3_SOURCED_WRITES_IV, 0x00ad);
+CPUMF_EVENT_ATTR(cf_z15, L1I_ONDRAWER_L4_SOURCED_WRITES, 0x00ae);
+CPUMF_EVENT_ATTR(cf_z15, L1I_OFFDRAWER_L4_SOURCED_WRITES, 0x00af);
+CPUMF_EVENT_ATTR(cf_z15, BCD_DFP_EXECUTION_SLOTS, 0x00e0);
+CPUMF_EVENT_ATTR(cf_z15, VX_BCD_EXECUTION_SLOTS, 0x00e1);
+CPUMF_EVENT_ATTR(cf_z15, DECIMAL_INSTRUCTIONS, 0x00e2);
+CPUMF_EVENT_ATTR(cf_z15, LAST_HOST_TRANSLATIONS, 0x00e8);
+CPUMF_EVENT_ATTR(cf_z15, TX_NC_TABORT, 0x00f3);
+CPUMF_EVENT_ATTR(cf_z15, TX_C_TABORT_NO_SPECIAL, 0x00f4);
+CPUMF_EVENT_ATTR(cf_z15, TX_C_TABORT_SPECIAL, 0x00f5);
+CPUMF_EVENT_ATTR(cf_z15, DFLT_ACCESS, 0x00f7);
+CPUMF_EVENT_ATTR(cf_z15, DFLT_CYCLES, 0x00fc);
+CPUMF_EVENT_ATTR(cf_z15, DFLT_CC, 0x00108);
+CPUMF_EVENT_ATTR(cf_z15, DFLT_CCERROR, 0x00109);
+CPUMF_EVENT_ATTR(cf_z15, MT_DIAG_CYCLES_ONE_THR_ACTIVE, 0x01c0);
+CPUMF_EVENT_ATTR(cf_z15, MT_DIAG_CYCLES_TWO_THR_ACTIVE, 0x01c1);
+
 static struct attribute *cpumcf_fvn1_pmu_event_attr[] __initdata = {
 	CPUMF_EVENT_PTR(cf_fvn1, CPU_CYCLES),
 	CPUMF_EVENT_PTR(cf_fvn1, INSTRUCTIONS),
@@ -516,6 +574,67 @@ static struct attribute *cpumcf_z14_pmu_event_attr[] __initdata = {
 	NULL,
 };
 
+static struct attribute *cpumcf_z15_pmu_event_attr[] __initdata = {
+	CPUMF_EVENT_PTR(cf_z15, L1D_RO_EXCL_WRITES),
+	CPUMF_EVENT_PTR(cf_z15, DTLB2_WRITES),
+	CPUMF_EVENT_PTR(cf_z15, DTLB2_MISSES),
+	CPUMF_EVENT_PTR(cf_z15, DTLB2_HPAGE_WRITES),
+	CPUMF_EVENT_PTR(cf_z15, DTLB2_GPAGE_WRITES),
+	CPUMF_EVENT_PTR(cf_z15, L1D_L2D_SOURCED_WRITES),
+	CPUMF_EVENT_PTR(cf_z15, ITLB2_WRITES),
+	CPUMF_EVENT_PTR(cf_z15, ITLB2_MISSES),
+	CPUMF_EVENT_PTR(cf_z15, L1I_L2I_SOURCED_WRITES),
+	CPUMF_EVENT_PTR(cf_z15, TLB2_PTE_WRITES),
+	CPUMF_EVENT_PTR(cf_z15, TLB2_CRSTE_WRITES),
+	CPUMF_EVENT_PTR(cf_z15, TLB2_ENGINES_BUSY),
+	CPUMF_EVENT_PTR(cf_z15, TX_C_TEND),
+	CPUMF_EVENT_PTR(cf_z15, TX_NC_TEND),
+	CPUMF_EVENT_PTR(cf_z15, L1C_TLB2_MISSES),
+	CPUMF_EVENT_PTR(cf_z15, L1D_ONCHIP_L3_SOURCED_WRITES),
+	CPUMF_EVENT_PTR(cf_z15, L1D_ONCHIP_MEMORY_SOURCED_WRITES),
+	CPUMF_EVENT_PTR(cf_z15, L1D_ONCHIP_L3_SOURCED_WRITES_IV),
+	CPUMF_EVENT_PTR(cf_z15, L1D_ONCLUSTER_L3_SOURCED_WRITES),
+	CPUMF_EVENT_PTR(cf_z15, L1D_ONCLUSTER_MEMORY_SOURCED_WRITES),
+	CPUMF_EVENT_PTR(cf_z15, L1D_ONCLUSTER_L3_SOURCED_WRITES_IV),
+	CPUMF_EVENT_PTR(cf_z15, L1D_OFFCLUSTER_L3_SOURCED_WRITES),
+	CPUMF_EVENT_PTR(cf_z15, L1D_OFFCLUSTER_MEMORY_SOURCED_WRITES),
+	CPUMF_EVENT_PTR(cf_z15, L1D_OFFCLUSTER_L3_SOURCED_WRITES_IV),
+	CPUMF_EVENT_PTR(cf_z15, L1D_OFFDRAWER_L3_SOURCED_WRITES),
+	CPUMF_EVENT_PTR(cf_z15, L1D_OFFDRAWER_MEMORY_SOURCED_WRITES),
+	CPUMF_EVENT_PTR(cf_z15, L1D_OFFDRAWER_L3_SOURCED_WRITES_IV),
+	CPUMF_EVENT_PTR(cf_z15, L1D_ONDRAWER_L4_SOURCED_WRITES),
+	CPUMF_EVENT_PTR(cf_z15, L1D_OFFDRAWER_L4_SOURCED_WRITES),
+	CPUMF_EVENT_PTR(cf_z15, L1D_ONCHIP_L3_SOURCED_WRITES_RO),
+	CPUMF_EVENT_PTR(cf_z15, L1I_ONCHIP_L3_SOURCED_WRITES),
+	CPUMF_EVENT_PTR(cf_z15, L1I_ONCHIP_MEMORY_SOURCED_WRITES),
+	CPUMF_EVENT_PTR(cf_z15, L1I_ONCHIP_L3_SOURCED_WRITES_IV),
+	CPUMF_EVENT_PTR(cf_z15, L1I_ONCLUSTER_L3_SOURCED_WRITES),
+	CPUMF_EVENT_PTR(cf_z15, L1I_ONCLUSTER_MEMORY_SOURCED_WRITES),
+	CPUMF_EVENT_PTR(cf_z15, L1I_ONCLUSTER_L3_SOURCED_WRITES_IV),
+	CPUMF_EVENT_PTR(cf_z15, L1I_OFFCLUSTER_L3_SOURCED_WRITES),
+	CPUMF_EVENT_PTR(cf_z15, L1I_OFFCLUSTER_MEMORY_SOURCED_WRITES),
+	CPUMF_EVENT_PTR(cf_z15, L1I_OFFCLUSTER_L3_SOURCED_WRITES_IV),
+	CPUMF_EVENT_PTR(cf_z15, L1I_OFFDRAWER_L3_SOURCED_WRITES),
+	CPUMF_EVENT_PTR(cf_z15, L1I_OFFDRAWER_MEMORY_SOURCED_WRITES),
+	CPUMF_EVENT_PTR(cf_z15, L1I_OFFDRAWER_L3_SOURCED_WRITES_IV),
+	CPUMF_EVENT_PTR(cf_z15, L1I_ONDRAWER_L4_SOURCED_WRITES),
+	CPUMF_EVENT_PTR(cf_z15, L1I_OFFDRAWER_L4_SOURCED_WRITES),
+	CPUMF_EVENT_PTR(cf_z15, BCD_DFP_EXECUTION_SLOTS),
+	CPUMF_EVENT_PTR(cf_z15, VX_BCD_EXECUTION_SLOTS),
+	CPUMF_EVENT_PTR(cf_z15, DECIMAL_INSTRUCTIONS),
+	CPUMF_EVENT_PTR(cf_z15, LAST_HOST_TRANSLATIONS),
+	CPUMF_EVENT_PTR(cf_z15, TX_NC_TABORT),
+	CPUMF_EVENT_PTR(cf_z15, TX_C_TABORT_NO_SPECIAL),
+	CPUMF_EVENT_PTR(cf_z15, TX_C_TABORT_SPECIAL),
+	CPUMF_EVENT_PTR(cf_z15, DFLT_ACCESS),
+	CPUMF_EVENT_PTR(cf_z15, DFLT_CYCLES),
+	CPUMF_EVENT_PTR(cf_z15, DFLT_CC),
+	CPUMF_EVENT_PTR(cf_z15, DFLT_CCERROR),
+	CPUMF_EVENT_PTR(cf_z15, MT_DIAG_CYCLES_ONE_THR_ACTIVE),
+	CPUMF_EVENT_PTR(cf_z15, MT_DIAG_CYCLES_TWO_THR_ACTIVE),
+	NULL,
+};
+
 /* END: CPUM_CF COUNTER DEFINITIONS ===================================== */
 
 static struct attribute_group cpumcf_pmu_events_group = {
@@ -624,9 +743,11 @@ __init const struct attribute_group **cpumf_cf_event_group(void)
 		break;
 	case 0x3906:
 	case 0x3907:
+		model = cpumcf_z14_pmu_event_attr;
+		break;
 	case 0x8561:
 	case 0x8562:
-		model = cpumcf_z14_pmu_event_attr;
+		model = cpumcf_z15_pmu_event_attr;
 		break;
 	default:
 		model = none;
diff --git a/arch/s390/kernel/perf_cpum_sf.c b/arch/s390/kernel/perf_cpum_sf.c
index b095b1c..85a711d 100644
--- a/arch/s390/kernel/perf_cpum_sf.c
+++ b/arch/s390/kernel/perf_cpum_sf.c
@@ -372,28 +372,33 @@ static void deallocate_buffers(struct cpu_hw_sf *cpuhw)
 
 static int allocate_buffers(struct cpu_hw_sf *cpuhw, struct hw_perf_event *hwc)
 {
-	unsigned long n_sdb, freq, factor;
+	unsigned long n_sdb, freq;
 	size_t sample_size;
 
 	/* Calculate sampling buffers using 4K pages
 	 *
-	 *    1. Determine the sample data size which depends on the used
-	 *	 sampling functions, for example, basic-sampling or
-	 *	 basic-sampling with diagnostic-sampling.
+	 *    1. The sampling size is 32 bytes for basic sampling. This size
+	 *	 is the same for all machine types. Diagnostic
+	 *	 sampling uses auxlilary data buffer setup which provides the
+	 *	 memory for SDBs using linux common code auxiliary trace
+	 *	 setup.
 	 *
-	 *    2. Use the sampling frequency as input.  The sampling buffer is
-	 *	 designed for almost one second.  This can be adjusted through
-	 *	 the "factor" variable.
-	 *	 In any case, alloc_sampling_buffer() sets the Alert Request
+	 *    2. Function alloc_sampling_buffer() sets the Alert Request
 	 *	 Control indicator to trigger a measurement-alert to harvest
-	 *	 sample-data-blocks (sdb).
+	 *	 sample-data-blocks (SDB). This is done per SDB. This
+	 *	 measurement alert interrupt fires quick enough to handle
+	 *	 one SDB, on very high frequency and work loads there might
+	 *	 be 2 to 3 SBDs available for sample processing.
+	 *	 Currently there is no need for setup alert request on every
+	 *	 n-th page. This is counterproductive as one IRQ triggers
+	 *	 a very high number of samples to be processed at one IRQ.
 	 *
-	 *    3. Compute the number of sample-data-blocks and ensure a minimum
-	 *	 of CPUM_SF_MIN_SDB.  Also ensure the upper limit does not
-	 *	 exceed a "calculated" maximum.  The symbolic maximum is
-	 *	 designed for basic-sampling only and needs to be increased if
-	 *	 diagnostic-sampling is active.
-	 *	 See also the remarks for these symbolic constants.
+	 *    3. Use the sampling frequency as input.
+	 *	 Compute the number of SDBs and ensure a minimum
+	 *	 of CPUM_SF_MIN_SDB.  Depending on frequency add some more
+	 *	 SDBs to handle a higher sampling rate.
+	 *	 Use a minimum of CPUM_SF_MIN_SDB and allow for 100 samples
+	 *	 (one SDB) for every 10000 HZ frequency increment.
 	 *
 	 *    4. Compute the number of sample-data-block-tables (SDBT) and
 	 *	 ensure a minimum of CPUM_SF_MIN_SDBT (one table can manage up
@@ -401,10 +406,7 @@ static int allocate_buffers(struct cpu_hw_sf *cpuhw, struct hw_perf_event *hwc)
 	 */
 	sample_size = sizeof(struct hws_basic_entry);
 	freq = sample_rate_to_freq(&cpuhw->qsi, SAMPL_RATE(hwc));
-	factor = 1;
-	n_sdb = DIV_ROUND_UP(freq, factor * ((PAGE_SIZE-64) / sample_size));
-	if (n_sdb < CPUM_SF_MIN_SDB)
-		n_sdb = CPUM_SF_MIN_SDB;
+	n_sdb = CPUM_SF_MIN_SDB + DIV_ROUND_UP(freq, 10000);
 
 	/* If there is already a sampling buffer allocated, it is very likely
 	 * that the sampling facility is enabled too.  If the event to be
@@ -1576,6 +1578,7 @@ static void hw_collect_aux(struct cpu_hw_sf *cpuhw)
 	unsigned long range = 0, size;
 	unsigned long long overflow = 0;
 	struct perf_output_handle *handle = &cpuhw->handle;
+	unsigned long num_sdb;
 
 	aux = perf_get_aux(handle);
 	if (WARN_ON_ONCE(!aux))
@@ -1587,13 +1590,14 @@ static void hw_collect_aux(struct cpu_hw_sf *cpuhw)
 			    size >> PAGE_SHIFT);
 	perf_aux_output_end(handle, size);
 
+	num_sdb = aux->sfb.num_sdb;
 	while (!done) {
 		/* Get an output handle */
 		aux = perf_aux_output_begin(handle, cpuhw->event);
 		if (handle->size == 0) {
 			pr_err("The AUX buffer with %lu pages for the "
 			       "diagnostic-sampling mode is full\n",
-				aux->sfb.num_sdb);
+				num_sdb);
 			debug_sprintf_event(sfdbg, 1,
 					    "%s: AUX buffer used up\n",
 					    __func__);
diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index 6ccef5f..eb6e23a 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -106,6 +106,7 @@ int copy_thread_tls(unsigned long clone_flags, unsigned long new_stackp,
 	p->thread.system_timer = 0;
 	p->thread.hardirq_timer = 0;
 	p->thread.softirq_timer = 0;
+	p->thread.last_break = 1;
 
 	frame->sf.back_chain = 0;
 	/* new return point is ret_from_fork */
diff --git a/arch/s390/kernel/processor.c b/arch/s390/kernel/processor.c
index 6ebc211..c92d04f 100644
--- a/arch/s390/kernel/processor.c
+++ b/arch/s390/kernel/processor.c
@@ -151,10 +151,35 @@ static void show_cpu_summary(struct seq_file *m, void *v)
 	}
 }
 
+static void show_cpu_topology(struct seq_file *m, unsigned long n)
+{
+#ifdef CONFIG_SCHED_TOPOLOGY
+	seq_printf(m, "physical id     : %d\n", topology_physical_package_id(n));
+	seq_printf(m, "core id         : %d\n", topology_core_id(n));
+	seq_printf(m, "book id         : %d\n", topology_book_id(n));
+	seq_printf(m, "drawer id       : %d\n", topology_drawer_id(n));
+	seq_printf(m, "dedicated       : %d\n", topology_cpu_dedicated(n));
+	seq_printf(m, "address         : %d\n", smp_cpu_get_cpu_address(n));
+	seq_printf(m, "siblings        : %d\n", cpumask_weight(topology_core_cpumask(n)));
+	seq_printf(m, "cpu cores       : %d\n", topology_booted_cores(n));
+#endif /* CONFIG_SCHED_TOPOLOGY */
+}
+
+static void show_cpu_ids(struct seq_file *m, unsigned long n)
+{
+	struct cpuid *id = &per_cpu(cpu_info.cpu_id, n);
+
+	seq_printf(m, "version         : %02X\n", id->version);
+	seq_printf(m, "identification  : %06X\n", id->ident);
+	seq_printf(m, "machine         : %04X\n", id->machine);
+}
+
 static void show_cpu_mhz(struct seq_file *m, unsigned long n)
 {
 	struct cpu_info *c = per_cpu_ptr(&cpu_info, n);
 
+	if (!machine_has_cpu_mhz)
+		return;
 	seq_printf(m, "cpu MHz dynamic : %d\n", c->cpu_mhz_dynamic);
 	seq_printf(m, "cpu MHz static  : %d\n", c->cpu_mhz_static);
 }
@@ -165,12 +190,13 @@ static void show_cpu_mhz(struct seq_file *m, unsigned long n)
 static int show_cpuinfo(struct seq_file *m, void *v)
 {
 	unsigned long n = (unsigned long) v - 1;
+	unsigned long first = cpumask_first(cpu_online_mask);
 
-	if (!n)
+	if (n == first)
 		show_cpu_summary(m, v);
-	if (!machine_has_cpu_mhz)
-		return 0;
 	seq_printf(m, "\ncpu number      : %ld\n", n);
+	show_cpu_topology(m, n);
+	show_cpu_ids(m, n);
 	show_cpu_mhz(m, n);
 	return 0;
 }
@@ -179,6 +205,8 @@ static inline void *c_update(loff_t *pos)
 {
 	if (*pos)
 		*pos = cpumask_next(*pos - 1, cpu_online_mask);
+	else
+		*pos = cpumask_first(cpu_online_mask);
 	return *pos < nr_cpu_ids ? (void *)*pos + 1 : NULL;
 }
 
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 1423090..36445dd 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -73,6 +73,7 @@
 #include <asm/nospec-branch.h>
 #include <asm/mem_detect.h>
 #include <asm/uv.h>
+#include <asm/asm-offsets.h>
 #include "entry.h"
 
 /*
@@ -446,6 +447,8 @@ static void __init setup_lowcore_dat_off(void)
 	lc->spinlock_index = 0;
 	arch_spin_lock_setup(0);
 	lc->br_r1_trampoline = 0x07f1;	/* br %r1 */
+	lc->return_lpswe = gen_lpswe(__LC_RETURN_PSW);
+	lc->return_mcck_lpswe = gen_lpswe(__LC_RETURN_MCCK_PSW);
 
 	set_prefix((u32)(unsigned long) lc);
 	lowcore_ptr[0] = lc;
@@ -789,6 +792,7 @@ static void __init memblock_add_mem_detect_info(void)
 		memblock_physmem_add(start, end - start);
 	}
 	memblock_set_bottom_up(false);
+	memblock_set_node(0, ULONG_MAX, &memblock.memory, 0);
 	memblock_dump_all();
 }
 
diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c
index e6fca54..b295090 100644
--- a/arch/s390/kernel/signal.c
+++ b/arch/s390/kernel/signal.c
@@ -487,7 +487,7 @@ void do_signal(struct pt_regs *regs)
 					regs->gprs[2] = -EINTR;
 					break;
 				}
-			/* fallthrough */
+				fallthrough;
 			case -ERESTARTNOINTR:
 				regs->gprs[2] = regs->orig_gpr2;
 				regs->psw.addr =
@@ -514,7 +514,7 @@ void do_signal(struct pt_regs *regs)
 		case -ERESTART_RESTARTBLOCK:
 			/* Restart with sys_restart_syscall */
 			regs->int_code = __NR_restart_syscall;
-		/* fallthrough */
+			fallthrough;
 		case -ERESTARTNOHAND:
 		case -ERESTARTSYS:
 		case -ERESTARTNOINTR:
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index a08bd25..7eaabba 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -212,6 +212,8 @@ static int pcpu_alloc_lowcore(struct pcpu *pcpu, int cpu)
 	lc->spinlock_lockval = arch_spin_lockval(cpu);
 	lc->spinlock_index = 0;
 	lc->br_r1_trampoline = 0x07f1;	/* br %r1 */
+	lc->return_lpswe = gen_lpswe(__LC_RETURN_PSW);
+	lc->return_mcck_lpswe = gen_lpswe(__LC_RETURN_MCCK_PSW);
 	if (nmi_alloc_per_cpu(lc))
 		goto out_async;
 	if (vdso_alloc_per_cpu(lc))
@@ -701,6 +703,11 @@ int smp_cpu_get_polarization(int cpu)
 	return pcpu_devices[cpu].polarization;
 }
 
+int smp_cpu_get_cpu_address(int cpu)
+{
+	return pcpu_devices[cpu].address;
+}
+
 static void __ref smp_get_core_info(struct sclp_core_info *info, int early)
 {
 	static int use_sigp_detection;
@@ -851,12 +858,13 @@ static void smp_init_secondary(void)
 	init_cpu_timer();
 	vtime_init();
 	pfault_init();
-	notify_cpu_starting(smp_processor_id());
+	notify_cpu_starting(cpu);
 	if (topology_cpu_dedicated(cpu))
 		set_cpu_flag(CIF_DEDICATED_CPU);
 	else
 		clear_cpu_flag(CIF_DEDICATED_CPU);
-	set_cpu_online(smp_processor_id(), true);
+	set_cpu_online(cpu, true);
+	update_cpu_masks();
 	inc_irq_stat(CPU_RST);
 	local_irq_enable();
 	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
@@ -928,6 +936,7 @@ int __cpu_disable(void)
 	/* Handle possible pending IPIs */
 	smp_handle_ext_call();
 	set_cpu_online(smp_processor_id(), false);
+	update_cpu_masks();
 	/* Disable pseudo page faults on this cpu. */
 	pfault_fini();
 	/* Disable interrupt sources via control register. */
diff --git a/arch/s390/kernel/suspend.c b/arch/s390/kernel/suspend.c
deleted file mode 100644
index 75b7b30..0000000
--- a/arch/s390/kernel/suspend.c
+++ /dev/null
@@ -1,240 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Suspend support specific for s390.
- *
- * Copyright IBM Corp. 2009
- *
- * Author(s): Hans-Joachim Picht <hans@linux.vnet.ibm.com>
- */
-
-#include <linux/pfn.h>
-#include <linux/suspend.h>
-#include <linux/mm.h>
-#include <linux/pci.h>
-#include <asm/ctl_reg.h>
-#include <asm/ipl.h>
-#include <asm/cio.h>
-#include <asm/sections.h>
-#include "entry.h"
-
-/*
- * The restore of the saved pages in an hibernation image will set
- * the change and referenced bits in the storage key for each page.
- * Overindication of the referenced bits after an hibernation cycle
- * does not cause any harm but the overindication of the change bits
- * would cause trouble.
- * Use the ARCH_SAVE_PAGE_KEYS hooks to save the storage key of each
- * page to the most significant byte of the associated page frame
- * number in the hibernation image.
- */
-
-/*
- * Key storage is allocated as a linked list of pages.
- * The size of the keys array is (PAGE_SIZE - sizeof(long))
- */
-struct page_key_data {
-	struct page_key_data *next;
-	unsigned char data[];
-};
-
-#define PAGE_KEY_DATA_SIZE	(PAGE_SIZE - sizeof(struct page_key_data *))
-
-static struct page_key_data *page_key_data;
-static struct page_key_data *page_key_rp, *page_key_wp;
-static unsigned long page_key_rx, page_key_wx;
-unsigned long suspend_zero_pages;
-
-/*
- * For each page in the hibernation image one additional byte is
- * stored in the most significant byte of the page frame number.
- * On suspend no additional memory is required but on resume the
- * keys need to be memorized until the page data has been restored.
- * Only then can the storage keys be set to their old state.
- */
-unsigned long page_key_additional_pages(unsigned long pages)
-{
-	return DIV_ROUND_UP(pages, PAGE_KEY_DATA_SIZE);
-}
-
-/*
- * Free page_key_data list of arrays.
- */
-void page_key_free(void)
-{
-	struct page_key_data *pkd;
-
-	while (page_key_data) {
-		pkd = page_key_data;
-		page_key_data = pkd->next;
-		free_page((unsigned long) pkd);
-	}
-}
-
-/*
- * Allocate page_key_data list of arrays with enough room to store
- * one byte for each page in the hibernation image.
- */
-int page_key_alloc(unsigned long pages)
-{
-	struct page_key_data *pk;
-	unsigned long size;
-
-	size = DIV_ROUND_UP(pages, PAGE_KEY_DATA_SIZE);
-	while (size--) {
-		pk = (struct page_key_data *) get_zeroed_page(GFP_KERNEL);
-		if (!pk) {
-			page_key_free();
-			return -ENOMEM;
-		}
-		pk->next = page_key_data;
-		page_key_data = pk;
-	}
-	page_key_rp = page_key_wp = page_key_data;
-	page_key_rx = page_key_wx = 0;
-	return 0;
-}
-
-/*
- * Save the storage key into the upper 8 bits of the page frame number.
- */
-void page_key_read(unsigned long *pfn)
-{
-	struct page *page;
-	unsigned long addr;
-	unsigned char key;
-
-	page = pfn_to_page(*pfn);
-	addr = (unsigned long) page_address(page);
-	key = (unsigned char) page_get_storage_key(addr) & 0x7f;
-	if (arch_test_page_nodat(page))
-		key |= 0x80;
-	*(unsigned char *) pfn = key;
-}
-
-/*
- * Extract the storage key from the upper 8 bits of the page frame number
- * and store it in the page_key_data list of arrays.
- */
-void page_key_memorize(unsigned long *pfn)
-{
-	page_key_wp->data[page_key_wx] = *(unsigned char *) pfn;
-	*(unsigned char *) pfn = 0;
-	if (++page_key_wx < PAGE_KEY_DATA_SIZE)
-		return;
-	page_key_wp = page_key_wp->next;
-	page_key_wx = 0;
-}
-
-/*
- * Get the next key from the page_key_data list of arrays and set the
- * storage key of the page referred by @address. If @address refers to
- * a "safe" page the swsusp_arch_resume code will transfer the storage
- * key from the buffer page to the original page.
- */
-void page_key_write(void *address)
-{
-	struct page *page;
-	unsigned char key;
-
-	key = page_key_rp->data[page_key_rx];
-	page_set_storage_key((unsigned long) address, key & 0x7f, 0);
-	page = virt_to_page(address);
-	if (key & 0x80)
-		arch_set_page_nodat(page, 0);
-	else
-		arch_set_page_dat(page, 0);
-	if (++page_key_rx >= PAGE_KEY_DATA_SIZE)
-		return;
-	page_key_rp = page_key_rp->next;
-	page_key_rx = 0;
-}
-
-int pfn_is_nosave(unsigned long pfn)
-{
-	unsigned long nosave_begin_pfn = PFN_DOWN(__pa(&__nosave_begin));
-	unsigned long nosave_end_pfn = PFN_DOWN(__pa(&__nosave_end));
-	unsigned long end_rodata_pfn = PFN_DOWN(__pa(__end_rodata)) - 1;
-	unsigned long stext_pfn = PFN_DOWN(__pa(_stext));
-
-	/* Always save lowcore pages (LC protection might be enabled). */
-	if (pfn <= LC_PAGES)
-		return 0;
-	if (pfn >= nosave_begin_pfn && pfn < nosave_end_pfn)
-		return 1;
-	/* Skip memory holes and read-only pages (DCSS, ...). */
-	if (pfn >= stext_pfn && pfn <= end_rodata_pfn)
-		return 0;
-	if (tprot(PFN_PHYS(pfn)))
-		return 1;
-	return 0;
-}
-
-/*
- * PM notifier callback for suspend
- */
-static int suspend_pm_cb(struct notifier_block *nb, unsigned long action,
-			 void *ptr)
-{
-	switch (action) {
-	case PM_SUSPEND_PREPARE:
-	case PM_HIBERNATION_PREPARE:
-		suspend_zero_pages = __get_free_pages(GFP_KERNEL, LC_ORDER);
-		if (!suspend_zero_pages)
-			return NOTIFY_BAD;
-		break;
-	case PM_POST_SUSPEND:
-	case PM_POST_HIBERNATION:
-		free_pages(suspend_zero_pages, LC_ORDER);
-		break;
-	default:
-		return NOTIFY_DONE;
-	}
-	return NOTIFY_OK;
-}
-
-static int __init suspend_pm_init(void)
-{
-	pm_notifier(suspend_pm_cb, 0);
-	return 0;
-}
-arch_initcall(suspend_pm_init);
-
-void save_processor_state(void)
-{
-	/* swsusp_arch_suspend() actually saves all cpu register contents.
-	 * Machine checks must be disabled since swsusp_arch_suspend() stores
-	 * register contents to their lowcore save areas. That's the same
-	 * place where register contents on machine checks would be saved.
-	 * To avoid register corruption disable machine checks.
-	 * We must also disable machine checks in the new psw mask for
-	 * program checks, since swsusp_arch_suspend() may generate program
-	 * checks. Disabling machine checks for all other new psw masks is
-	 * just paranoia.
-	 */
-	local_mcck_disable();
-	/* Disable lowcore protection */
-	__ctl_clear_bit(0,28);
-	S390_lowcore.external_new_psw.mask &= ~PSW_MASK_MCHECK;
-	S390_lowcore.svc_new_psw.mask &= ~PSW_MASK_MCHECK;
-	S390_lowcore.io_new_psw.mask &= ~PSW_MASK_MCHECK;
-	S390_lowcore.program_new_psw.mask &= ~PSW_MASK_MCHECK;
-}
-
-void restore_processor_state(void)
-{
-	S390_lowcore.external_new_psw.mask |= PSW_MASK_MCHECK;
-	S390_lowcore.svc_new_psw.mask |= PSW_MASK_MCHECK;
-	S390_lowcore.io_new_psw.mask |= PSW_MASK_MCHECK;
-	S390_lowcore.program_new_psw.mask |= PSW_MASK_MCHECK;
-	/* Enable lowcore protection */
-	__ctl_set_bit(0,28);
-	local_mcck_enable();
-}
-
-/* Called at the end of swsusp_arch_resume */
-void s390_early_resume(void)
-{
-	lgr_info_log();
-	channel_subsystem_reinit();
-	zpci_rescan();
-}
diff --git a/arch/s390/kernel/swsusp.S b/arch/s390/kernel/swsusp.S
deleted file mode 100644
index a7baf0b..0000000
--- a/arch/s390/kernel/swsusp.S
+++ /dev/null
@@ -1,276 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * S390 64-bit swsusp implementation
- *
- * Copyright IBM Corp. 2009
- *
- * Author(s): Hans-Joachim Picht <hans@linux.vnet.ibm.com>
- *	      Michael Holzheu <holzheu@linux.vnet.ibm.com>
- */
-
-#include <linux/linkage.h>
-#include <asm/page.h>
-#include <asm/ptrace.h>
-#include <asm/thread_info.h>
-#include <asm/asm-offsets.h>
-#include <asm/nospec-insn.h>
-#include <asm/sigp.h>
-
-/*
- * Save register context in absolute 0 lowcore and call swsusp_save() to
- * create in-memory kernel image. The context is saved in the designated
- * "store status" memory locations (see POP).
- * We return from this function twice. The first time during the suspend to
- * disk process. The second time via the swsusp_arch_resume() function
- * (see below) in the resume process.
- * This function runs with disabled interrupts.
- */
-	GEN_BR_THUNK %r14
-
-	.section .text
-ENTRY(swsusp_arch_suspend)
-	lg	%r1,__LC_NODAT_STACK
-	stmg	%r6,%r15,__SF_GPRS(%r1)
-	aghi	%r1,-STACK_FRAME_OVERHEAD
-	stg	%r15,__SF_BACKCHAIN(%r1)
-	lgr	%r15,%r1
-
-	/* Store FPU registers */
-	brasl	%r14,save_fpu_regs
-
-	/* Deactivate DAT */
-	stnsm	__SF_EMPTY(%r15),0xfb
-
-	/* Store prefix register on stack */
-	stpx	__SF_EMPTY(%r15)
-
-	/* Save prefix register contents for lowcore copy */
-	llgf	%r10,__SF_EMPTY(%r15)
-
-	/* Get pointer to save area */
-	lghi	%r1,0x1000
-
-	/* Save CPU address */
-	stap	__LC_EXT_CPU_ADDR(%r0)
-
-	/* Store registers */
-	mvc	0x318(4,%r1),__SF_EMPTY(%r15)	/* move prefix to lowcore */
-	stam	%a0,%a15,0x340(%r1)		/* store access registers */
-	stctg	%c0,%c15,0x380(%r1)		/* store control registers */
-	stmg	%r0,%r15,0x280(%r1)		/* store general registers */
-
-	stpt	0x328(%r1)			/* store timer */
-	stck	__SF_EMPTY(%r15)		/* store clock */
-	stckc	0x330(%r1)			/* store clock comparator */
-
-	/* Update cputime accounting before going to sleep */
-	lg	%r0,__LC_LAST_UPDATE_TIMER
-	slg	%r0,0x328(%r1)
-	alg	%r0,__LC_SYSTEM_TIMER
-	stg	%r0,__LC_SYSTEM_TIMER
-	mvc	__LC_LAST_UPDATE_TIMER(8),0x328(%r1)
-	lg	%r0,__LC_LAST_UPDATE_CLOCK
-	slg	%r0,__SF_EMPTY(%r15)
-	alg	%r0,__LC_STEAL_TIMER
-	stg	%r0,__LC_STEAL_TIMER
-	mvc	__LC_LAST_UPDATE_CLOCK(8),__SF_EMPTY(%r15)
-
-	/* Activate DAT */
-	stosm	__SF_EMPTY(%r15),0x04
-
-	/* Set prefix page to zero */
-	xc	__SF_EMPTY(4,%r15),__SF_EMPTY(%r15)
-	spx	__SF_EMPTY(%r15)
-
-	/* Save absolute zero pages */
-	larl	%r2,suspend_zero_pages
-	lg	%r2,0(%r2)
-	lghi	%r4,0
-	lghi	%r3,2*PAGE_SIZE
-	lghi	%r5,2*PAGE_SIZE
-1:	mvcle	%r2,%r4,0
-	jo	1b
-
-	/* Copy lowcore to absolute zero lowcore */
-	lghi	%r2,0
-	lgr	%r4,%r10
-	lghi	%r3,2*PAGE_SIZE
-	lghi	%r5,2*PAGE_SIZE
-1:	mvcle	%r2,%r4,0
-	jo	1b
-
-	/* Save image */
-	brasl	%r14,swsusp_save
-
-	/* Restore prefix register and return */
-	lghi	%r1,0x1000
-	spx	0x318(%r1)
-	lmg	%r6,%r15,STACK_FRAME_OVERHEAD + __SF_GPRS(%r15)
-	lghi	%r2,0
-	BR_EX	%r14
-ENDPROC(swsusp_arch_suspend)
-
-/*
- * Restore saved memory image to correct place and restore register context.
- * Then we return to the function that called swsusp_arch_suspend().
- * swsusp_arch_resume() runs with disabled interrupts.
- */
-ENTRY(swsusp_arch_resume)
-	stmg	%r6,%r15,__SF_GPRS(%r15)
-	lgr	%r1,%r15
-	aghi	%r15,-STACK_FRAME_OVERHEAD
-	stg	%r1,__SF_BACKCHAIN(%r15)
-
-	/* Make all free pages stable */
-	lghi	%r2,1
-	brasl	%r14,arch_set_page_states
-
-	/* Set prefix page to zero */
-	xc	__SF_EMPTY(4,%r15),__SF_EMPTY(%r15)
-	spx	__SF_EMPTY(%r15)
-
-	/* Deactivate DAT */
-	stnsm	__SF_EMPTY(%r15),0xfb
-
-	/* Restore saved image */
-	larl	%r1,restore_pblist
-	lg	%r1,0(%r1)
-	ltgr	%r1,%r1
-	jz	2f
-0:
-	lg	%r2,8(%r1)
-	lg	%r4,0(%r1)
-	iske	%r0,%r4
-	lghi	%r3,PAGE_SIZE
-	lghi	%r5,PAGE_SIZE
-1:
-	mvcle	%r2,%r4,0
-	jo	1b
-	lg	%r2,8(%r1)
-	sske	%r0,%r2
-	lg	%r1,16(%r1)
-	ltgr	%r1,%r1
-	jnz	0b
-2:
-	ptlb				/* flush tlb */
-
-	/* Reset System */
-	larl	%r1,.Lnew_pgm_check_psw
-	epsw	%r2,%r3
-	stm	%r2,%r3,0(%r1)
-	mvc	__LC_PGM_NEW_PSW(16,%r0),0(%r1)
-	larl	%r1,__swsusp_reset_dma
-	lg	%r1,0(%r1)
-	BASR_EX	%r14,%r1
-	larl	%r1,smp_cpu_mt_shift
-	icm	%r1,15,0(%r1)
-	jz	smt_done
-	llgfr	%r1,%r1
-smt_loop:
-	sigp	%r1,%r0,SIGP_SET_MULTI_THREADING
-	brc	8,smt_done			/* accepted */
-	brc	2,smt_loop			/* busy, try again */
-smt_done:
-	larl	%r1,.Lnew_pgm_check_psw
-	lpswe	0(%r1)
-pgm_check_entry:
-
-	/* Switch to original suspend CPU */
-	larl	%r1,.Lresume_cpu		/* Resume CPU address: r2 */
-	stap	0(%r1)
-	llgh	%r2,0(%r1)
-	llgh	%r1,__LC_EXT_CPU_ADDR(%r0)	/* Suspend CPU address: r1 */
-	cgr	%r1,%r2
-	je	restore_registers		/* r1 = r2 -> nothing to do */
-	larl	%r4,.Lrestart_suspend_psw	/* Set new restart PSW */
-	mvc	__LC_RST_NEW_PSW(16,%r0),0(%r4)
-3:
-	sigp	%r9,%r1,SIGP_INITIAL_CPU_RESET	/* sigp initial cpu reset */
-	brc	8,4f				/* accepted */
-	brc	2,3b				/* busy, try again */
-
-	/* Suspend CPU not available -> panic */
-	larl	%r15,init_thread_union+THREAD_SIZE-STACK_FRAME_OVERHEAD
-	larl	%r2,.Lpanic_string
-	brasl	%r14,sclp_early_printk_force
-	larl	%r3,.Ldisabled_wait_31
-	lpsw	0(%r3)
-4:
-	/* Switch to suspend CPU */
-	sigp	%r9,%r1,SIGP_RESTART	/* sigp restart to suspend CPU */
-	brc	2,4b			/* busy, try again */
-5:
-	sigp	%r9,%r2,SIGP_STOP	/* sigp stop to current resume CPU */
-	brc	2,5b			/* busy, try again */
-6:	j	6b
-
-restart_suspend:
-	larl	%r1,.Lresume_cpu
-	llgh	%r2,0(%r1)
-7:
-	sigp	%r9,%r2,SIGP_SENSE	/* sigp sense, wait for resume CPU */
-	brc	8,7b			/* accepted, status 0, still running */
-	brc	2,7b			/* busy, try again */
-	tmll	%r9,0x40		/* Test if resume CPU is stopped */
-	jz	7b
-
-restore_registers:
-	/* Restore registers */
-	lghi	%r13,0x1000		/* %r1 = pointer to save area */
-
-	/* Ignore time spent in suspended state. */
-	llgf	%r1,0x318(%r13)
-	stck	__LC_LAST_UPDATE_CLOCK(%r1)
-	spt	0x328(%r13)		/* reprogram timer */
-	//sckc	0x330(%r13)		/* set clock comparator */
-
-	lctlg	%c0,%c15,0x380(%r13)	/* load control registers */
-	lam	%a0,%a15,0x340(%r13)	/* load access registers */
-
-	/* Load old stack */
-	lg	%r15,0x2f8(%r13)
-
-	/* Save prefix register */
-	mvc __SF_EMPTY(4,%r15),0x318(%r13)
-
-	/* Restore absolute zero pages */
-	lghi	%r2,0
-	larl	%r4,suspend_zero_pages
-	lg	%r4,0(%r4)
-	lghi	%r3,2*PAGE_SIZE
-	lghi	%r5,2*PAGE_SIZE
-1:	mvcle	%r2,%r4,0
-	jo	1b
-
-	/* Restore prefix register */
-	spx	__SF_EMPTY(%r15)
-
-	/* Activate DAT */
-	stosm	__SF_EMPTY(%r15),0x04
-
-	/* Make all free pages unstable */
-	lghi	%r2,0
-	brasl	%r14,arch_set_page_states
-
-	/* Call arch specific early resume code */
-	brasl	%r14,s390_early_resume
-
-	/* Return 0 */
-	lmg	%r6,%r15,STACK_FRAME_OVERHEAD + __SF_GPRS(%r15)
-	lghi	%r2,0
-	BR_EX	%r14
-ENDPROC(swsusp_arch_resume)
-
-	.section .data..nosave,"aw",@progbits
-	.align	8
-.Ldisabled_wait_31:
-	.long  0x000a0000,0x00000000
-.Lpanic_string:
-	.asciz	"Resume not possible because suspend CPU is no longer available\n"
-	.align	8
-.Lrestart_suspend_psw:
-	.quad	0x0000000180000000,restart_suspend
-.Lnew_pgm_check_psw:
-	.quad	0,pgm_check_entry
-.Lresume_cpu:
-	.byte	0,0
diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c
index 3627953..5f70cef 100644
--- a/arch/s390/kernel/topology.c
+++ b/arch/s390/kernel/topology.c
@@ -26,7 +26,6 @@
 #include <linux/nodemask.h>
 #include <linux/node.h>
 #include <asm/sysinfo.h>
-#include <asm/numa.h>
 
 #define PTF_HORIZONTAL	(0UL)
 #define PTF_VERTICAL	(1UL)
@@ -63,8 +62,6 @@ static struct mask_info drawer_info;
 struct cpu_topology_s390 cpu_topology[NR_CPUS];
 EXPORT_SYMBOL_GPL(cpu_topology);
 
-cpumask_t cpus_with_topology;
-
 static cpumask_t cpu_group_map(struct mask_info *info, unsigned int cpu)
 {
 	cpumask_t mask;
@@ -86,11 +83,12 @@ static cpumask_t cpu_group_map(struct mask_info *info, unsigned int cpu)
 		cpumask_copy(&mask, cpu_present_mask);
 		break;
 	default:
-		/* fallthrough */
+		fallthrough;
 	case TOPOLOGY_MODE_SINGLE:
 		cpumask_copy(&mask, cpumask_of(cpu));
 		break;
 	}
+	cpumask_and(&mask, &mask, cpu_online_mask);
 	return mask;
 }
 
@@ -106,6 +104,7 @@ static cpumask_t cpu_thread_map(unsigned int cpu)
 	for (i = 0; i <= smp_cpu_mtid; i++)
 		if (cpu_present(cpu + i))
 			cpumask_set_cpu(cpu + i, &mask);
+	cpumask_and(&mask, &mask, cpu_online_mask);
 	return mask;
 }
 
@@ -138,7 +137,6 @@ static void add_cpus_to_mask(struct topology_core *tl_core,
 			cpumask_set_cpu(lcpu + i, &drawer->mask);
 			cpumask_set_cpu(lcpu + i, &book->mask);
 			cpumask_set_cpu(lcpu + i, &socket->mask);
-			cpumask_set_cpu(lcpu + i, &cpus_with_topology);
 			smp_cpu_set_polarization(lcpu + i, tl_core->pp);
 		}
 	}
@@ -245,10 +243,10 @@ int topology_set_cpu_management(int fc)
 	return rc;
 }
 
-static void update_cpu_masks(void)
+void update_cpu_masks(void)
 {
-	struct cpu_topology_s390 *topo;
-	int cpu, id;
+	struct cpu_topology_s390 *topo, *topo_package, *topo_sibling;
+	int cpu, sibling, pkg_first, smt_first, id;
 
 	for_each_possible_cpu(cpu) {
 		topo = &cpu_topology[cpu];
@@ -256,6 +254,7 @@ static void update_cpu_masks(void)
 		topo->core_mask = cpu_group_map(&socket_info, cpu);
 		topo->book_mask = cpu_group_map(&book_info, cpu);
 		topo->drawer_mask = cpu_group_map(&drawer_info, cpu);
+		topo->booted_cores = 0;
 		if (topology_mode != TOPOLOGY_MODE_HW) {
 			id = topology_mode == TOPOLOGY_MODE_PACKAGE ? 0 : cpu;
 			topo->thread_id = cpu;
@@ -263,11 +262,23 @@ static void update_cpu_masks(void)
 			topo->socket_id = id;
 			topo->book_id = id;
 			topo->drawer_id = id;
-			if (cpu_present(cpu))
-				cpumask_set_cpu(cpu, &cpus_with_topology);
 		}
 	}
-	numa_update_cpu_topology();
+	for_each_online_cpu(cpu) {
+		topo = &cpu_topology[cpu];
+		pkg_first = cpumask_first(&topo->core_mask);
+		topo_package = &cpu_topology[pkg_first];
+		if (cpu == pkg_first) {
+			for_each_cpu(sibling, &topo->core_mask) {
+				topo_sibling = &cpu_topology[sibling];
+				smt_first = cpumask_first(&topo_sibling->thread_mask);
+				if (sibling == smt_first)
+					topo_package->booted_cores++;
+			}
+		} else {
+			topo->booted_cores = topo_package->booted_cores;
+		}
+	}
 }
 
 void store_topology(struct sysinfo_15_1_x *info)
@@ -289,7 +300,6 @@ static int __arch_update_cpu_topology(void)
 	int rc = 0;
 
 	mutex_lock(&smp_cpu_state_mutex);
-	cpumask_clear(&cpus_with_topology);
 	if (MACHINE_HAS_TOPOLOGY) {
 		rc = 1;
 		store_topology(info);
diff --git a/arch/s390/kernel/traps.c b/arch/s390/kernel/traps.c
index dc75588..ff9cc4c 100644
--- a/arch/s390/kernel/traps.c
+++ b/arch/s390/kernel/traps.c
@@ -271,7 +271,7 @@ void kernel_stack_overflow(struct pt_regs *regs)
 }
 NOKPROBE_SYMBOL(kernel_stack_overflow);
 
-static void test_monitor_call(void)
+static void __init test_monitor_call(void)
 {
 	int val = 1;
 
diff --git a/arch/s390/kernel/vdso64/.gitignore b/arch/s390/kernel/vdso64/.gitignore
index 3fd18cf..4ec8068 100644
--- a/arch/s390/kernel/vdso64/.gitignore
+++ b/arch/s390/kernel/vdso64/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 vdso64.lds
diff --git a/arch/s390/kvm/Kconfig b/arch/s390/kvm/Kconfig
index d3db3d7..def3b60 100644
--- a/arch/s390/kvm/Kconfig
+++ b/arch/s390/kvm/Kconfig
@@ -55,8 +55,4 @@
 
 	  If unsure, say N.
 
-# OK, it's a little counter-intuitive to do this, but it puts it neatly under
-# the virtualization menu.
-source "drivers/vhost/Kconfig"
-
 endif # VIRTUALIZATION
diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c
index 8191106..bfb4811 100644
--- a/arch/s390/kvm/interrupt.c
+++ b/arch/s390/kvm/interrupt.c
@@ -393,7 +393,7 @@ static unsigned long deliverable_irqs(struct kvm_vcpu *vcpu)
 	if (psw_mchk_disabled(vcpu))
 		active_mask &= ~IRQ_PEND_MCHK_MASK;
 	/* PV guest cpus can have a single interruption injected at a time. */
-	if (kvm_s390_pv_cpu_is_protected(vcpu) &&
+	if (kvm_s390_pv_cpu_get_handle(vcpu) &&
 	    vcpu->arch.sie_block->iictl != IICTL_CODE_NONE)
 		active_mask &= ~(IRQ_PEND_EXT_II_MASK |
 				 IRQ_PEND_IO_MASK |
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 19a8102..5dcf9ff 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -1939,6 +1939,9 @@ static int gfn_to_memslot_approx(struct kvm_memslots *slots, gfn_t gfn)
 			start = slot + 1;
 	}
 
+	if (start >= slots->used_slots)
+		return slots->used_slots - 1;
+
 	if (gfn >= memslots[start].base_gfn &&
 	    gfn < memslots[start].base_gfn + memslots[start].npages) {
 		atomic_set(&slots->lru_slot, start);
diff --git a/arch/s390/mm/cmm.c b/arch/s390/mm/cmm.c
index a51c892..ae989b7 100644
--- a/arch/s390/mm/cmm.c
+++ b/arch/s390/mm/cmm.c
@@ -19,7 +19,6 @@
 #include <linux/swap.h>
 #include <linux/kthread.h>
 #include <linux/oom.h>
-#include <linux/suspend.h>
 #include <linux/uaccess.h>
 
 #include <asm/pgalloc.h>
@@ -49,7 +48,6 @@ static volatile long cmm_pages_target;
 static volatile long cmm_timed_pages_target;
 static long cmm_timeout_pages;
 static long cmm_timeout_seconds;
-static int cmm_suspended;
 
 static struct cmm_page_array *cmm_page_list;
 static struct cmm_page_array *cmm_timed_page_list;
@@ -151,9 +149,9 @@ static int cmm_thread(void *dummy)
 
 	while (1) {
 		rc = wait_event_interruptible(cmm_thread_wait,
-			(!cmm_suspended && (cmm_pages != cmm_pages_target ||
-			 cmm_timed_pages != cmm_timed_pages_target)) ||
-			 kthread_should_stop());
+			cmm_pages != cmm_pages_target ||
+			cmm_timed_pages != cmm_timed_pages_target ||
+			kthread_should_stop());
 		if (kthread_should_stop() || rc == -ERESTARTSYS) {
 			cmm_pages_target = cmm_pages;
 			cmm_timed_pages_target = cmm_timed_pages;
@@ -390,38 +388,6 @@ static void cmm_smsg_target(const char *from, char *msg)
 
 static struct ctl_table_header *cmm_sysctl_header;
 
-static int cmm_suspend(void)
-{
-	cmm_suspended = 1;
-	cmm_free_pages(cmm_pages, &cmm_pages, &cmm_page_list);
-	cmm_free_pages(cmm_timed_pages, &cmm_timed_pages, &cmm_timed_page_list);
-	return 0;
-}
-
-static int cmm_resume(void)
-{
-	cmm_suspended = 0;
-	cmm_kick_thread();
-	return 0;
-}
-
-static int cmm_power_event(struct notifier_block *this,
-			   unsigned long event, void *ptr)
-{
-	switch (event) {
-	case PM_POST_HIBERNATION:
-		return cmm_resume();
-	case PM_HIBERNATION_PREPARE:
-		return cmm_suspend();
-	default:
-		return NOTIFY_DONE;
-	}
-}
-
-static struct notifier_block cmm_power_notifier = {
-	.notifier_call = cmm_power_event,
-};
-
 static int __init cmm_init(void)
 {
 	int rc = -ENOMEM;
@@ -446,16 +412,11 @@ static int __init cmm_init(void)
 	rc = register_oom_notifier(&cmm_oom_nb);
 	if (rc < 0)
 		goto out_oom_notify;
-	rc = register_pm_notifier(&cmm_power_notifier);
-	if (rc)
-		goto out_pm;
 	cmm_thread_ptr = kthread_run(cmm_thread, NULL, "cmmthread");
 	if (!IS_ERR(cmm_thread_ptr))
 		return 0;
 
 	rc = PTR_ERR(cmm_thread_ptr);
-	unregister_pm_notifier(&cmm_power_notifier);
-out_pm:
 	unregister_oom_notifier(&cmm_oom_nb);
 out_oom_notify:
 #ifdef CONFIG_CMM_IUCV
@@ -475,7 +436,6 @@ static void __exit cmm_exit(void)
 #ifdef CONFIG_CMM_IUCV
 	smsg_unregister_callback(SMSG_PREFIX, cmm_smsg_target);
 #endif
-	unregister_pm_notifier(&cmm_power_notifier);
 	unregister_oom_notifier(&cmm_oom_nb);
 	kthread_stop(cmm_thread_ptr);
 	del_timer_sync(&cmm_timer);
diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index 09bf7f2..dedc28b 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -45,11 +45,11 @@
 #define __SUBCODE_MASK 0x0600
 #define __PF_RES_FIELD 0x8000000000000000ULL
 
-#define VM_FAULT_BADCONTEXT	0x010000
-#define VM_FAULT_BADMAP		0x020000
-#define VM_FAULT_BADACCESS	0x040000
-#define VM_FAULT_SIGNAL		0x080000
-#define VM_FAULT_PFAULT		0x100000
+#define VM_FAULT_BADCONTEXT	((__force vm_fault_t) 0x010000)
+#define VM_FAULT_BADMAP		((__force vm_fault_t) 0x020000)
+#define VM_FAULT_BADACCESS	((__force vm_fault_t) 0x040000)
+#define VM_FAULT_SIGNAL		((__force vm_fault_t) 0x080000)
+#define VM_FAULT_PFAULT		((__force vm_fault_t) 0x100000)
 
 enum fault_type {
 	KERNEL_FAULT,
@@ -123,7 +123,7 @@ static void dump_pagetable(unsigned long asce, unsigned long address)
 		if (*table & _REGION_ENTRY_INVALID)
 			goto out;
 		table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
-		/* fallthrough */
+		fallthrough;
 	case _ASCE_TYPE_REGION2:
 		table += (address & _REGION2_INDEX) >> _REGION2_SHIFT;
 		if (bad_address(table))
@@ -132,7 +132,7 @@ static void dump_pagetable(unsigned long asce, unsigned long address)
 		if (*table & _REGION_ENTRY_INVALID)
 			goto out;
 		table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
-		/* fallthrough */
+		fallthrough;
 	case _ASCE_TYPE_REGION3:
 		table += (address & _REGION3_INDEX) >> _REGION3_SHIFT;
 		if (bad_address(table))
@@ -141,7 +141,7 @@ static void dump_pagetable(unsigned long asce, unsigned long address)
 		if (*table & (_REGION_ENTRY_INVALID | _REGION3_ENTRY_LARGE))
 			goto out;
 		table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
-		/* fallthrough */
+		fallthrough;
 	case _ASCE_TYPE_SEGMENT:
 		table += (address & _SEGMENT_INDEX) >> _SEGMENT_SHIFT;
 		if (bad_address(table))
@@ -328,7 +328,7 @@ static noinline void do_fault_error(struct pt_regs *regs, int access,
 	case VM_FAULT_BADACCESS:
 		if (access == VM_EXEC && signal_return(regs) == 0)
 			break;
-		/* fallthrough */
+		fallthrough;
 	case VM_FAULT_BADMAP:
 		/* Bad memory access. Check if it is kernel or user space. */
 		if (user_mode(regs)) {
@@ -338,9 +338,8 @@ static noinline void do_fault_error(struct pt_regs *regs, int access,
 			do_sigsegv(regs, si_code);
 			break;
 		}
-		/* fallthrough */
+		fallthrough;
 	case VM_FAULT_BADCONTEXT:
-		/* fallthrough */
 	case VM_FAULT_PFAULT:
 		do_no_context(regs);
 		break;
@@ -581,7 +580,7 @@ void do_dat_exception(struct pt_regs *regs)
 	int access;
 	vm_fault_t fault;
 
-	access = VM_READ | VM_EXEC | VM_WRITE;
+	access = VM_ACCESS_FLAGS;
 	fault = do_exception(regs, access);
 	if (unlikely(fault))
 		do_fault_error(regs, access, fault);
@@ -853,9 +852,7 @@ void do_secure_storage_access(struct pt_regs *regs)
 			BUG();
 		break;
 	case VDSO_FAULT:
-		/* fallthrough */
 	case GMAP_FAULT:
-		/* fallthrough */
 	default:
 		do_fault_error(regs, VM_READ | VM_WRITE, VM_FAULT_BADMAP);
 		WARN_ON_ONCE(1);
diff --git a/arch/s390/mm/hugetlbpage.c b/arch/s390/mm/hugetlbpage.c
index 5674710..f01dadd 100644
--- a/arch/s390/mm/hugetlbpage.c
+++ b/arch/s390/mm/hugetlbpage.c
@@ -326,7 +326,6 @@ unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
 	struct hstate *h = hstate_file(file);
 	struct mm_struct *mm = current->mm;
 	struct vm_area_struct *vma;
-	int rc;
 
 	if (len & ~huge_page_mask(h))
 		return -EINVAL;
@@ -353,15 +352,9 @@ unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
 	else
 		addr = hugetlb_get_unmapped_area_topdown(file, addr, len,
 				pgoff, flags);
-	if (addr & ~PAGE_MASK)
+	if (offset_in_page(addr))
 		return addr;
 
 check_asce_limit:
-	if (addr + len > current->mm->context.asce_limit &&
-	    addr + len <= TASK_SIZE) {
-		rc = crst_table_upgrade(mm, addr + len);
-		if (rc)
-			return (unsigned long) rc;
-	}
-	return addr;
+	return check_asce_limit(mm, addr, len);
 }
diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c
index ac44bd7..87b2d02 100644
--- a/arch/s390/mm/init.c
+++ b/arch/s390/mm/init.c
@@ -268,20 +268,23 @@ device_initcall(s390_cma_mem_init);
 #endif /* CONFIG_CMA */
 
 int arch_add_memory(int nid, u64 start, u64 size,
-		struct mhp_restrictions *restrictions)
+		    struct mhp_params *params)
 {
 	unsigned long start_pfn = PFN_DOWN(start);
 	unsigned long size_pages = PFN_DOWN(size);
 	int rc;
 
-	if (WARN_ON_ONCE(restrictions->altmap))
+	if (WARN_ON_ONCE(params->altmap))
+		return -EINVAL;
+
+	if (WARN_ON_ONCE(params->pgprot.pgprot != PAGE_KERNEL.pgprot))
 		return -EINVAL;
 
 	rc = vmem_add_mapping(start, size);
 	if (rc)
 		return rc;
 
-	rc = __add_pages(nid, start_pfn, size_pages, restrictions);
+	rc = __add_pages(nid, start_pfn, size_pages, params);
 	if (rc)
 		vmem_remove_mapping(start, size);
 	return rc;
diff --git a/arch/s390/mm/mmap.c b/arch/s390/mm/mmap.c
index cbc718b..1b78f630 100644
--- a/arch/s390/mm/mmap.c
+++ b/arch/s390/mm/mmap.c
@@ -72,14 +72,13 @@ static inline unsigned long mmap_base(unsigned long rnd,
 	return PAGE_ALIGN(STACK_TOP - gap - rnd);
 }
 
-unsigned long
-arch_get_unmapped_area(struct file *filp, unsigned long addr,
-		unsigned long len, unsigned long pgoff, unsigned long flags)
+unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr,
+				     unsigned long len, unsigned long pgoff,
+				     unsigned long flags)
 {
 	struct mm_struct *mm = current->mm;
 	struct vm_area_struct *vma;
 	struct vm_unmapped_area_info info;
-	int rc;
 
 	if (len > TASK_SIZE - mmap_min_addr)
 		return -ENOMEM;
@@ -105,30 +104,20 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
 		info.align_mask = 0;
 	info.align_offset = pgoff << PAGE_SHIFT;
 	addr = vm_unmapped_area(&info);
-	if (addr & ~PAGE_MASK)
+	if (offset_in_page(addr))
 		return addr;
 
 check_asce_limit:
-	if (addr + len > current->mm->context.asce_limit &&
-	    addr + len <= TASK_SIZE) {
-		rc = crst_table_upgrade(mm, addr + len);
-		if (rc)
-			return (unsigned long) rc;
-	}
-
-	return addr;
+	return check_asce_limit(mm, addr, len);
 }
 
-unsigned long
-arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
-			  const unsigned long len, const unsigned long pgoff,
-			  const unsigned long flags)
+unsigned long arch_get_unmapped_area_topdown(struct file *filp, unsigned long addr,
+					     unsigned long len, unsigned long pgoff,
+					     unsigned long flags)
 {
 	struct vm_area_struct *vma;
 	struct mm_struct *mm = current->mm;
-	unsigned long addr = addr0;
 	struct vm_unmapped_area_info info;
-	int rc;
 
 	/* requested length too big for entire address space */
 	if (len > TASK_SIZE - mmap_min_addr)
@@ -163,25 +152,18 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
 	 * can happen with large stack limits and large mmap()
 	 * allocations.
 	 */
-	if (addr & ~PAGE_MASK) {
+	if (offset_in_page(addr)) {
 		VM_BUG_ON(addr != -ENOMEM);
 		info.flags = 0;
 		info.low_limit = TASK_UNMAPPED_BASE;
 		info.high_limit = TASK_SIZE;
 		addr = vm_unmapped_area(&info);
-		if (addr & ~PAGE_MASK)
+		if (offset_in_page(addr))
 			return addr;
 	}
 
 check_asce_limit:
-	if (addr + len > current->mm->context.asce_limit &&
-	    addr + len <= TASK_SIZE) {
-		rc = crst_table_upgrade(mm, addr + len);
-		if (rc)
-			return (unsigned long) rc;
-	}
-
-	return addr;
+	return check_asce_limit(mm, addr, len);
 }
 
 /*
diff --git a/arch/s390/mm/pageattr.c b/arch/s390/mm/pageattr.c
index f8c6faa..e22c06d 100644
--- a/arch/s390/mm/pageattr.c
+++ b/arch/s390/mm/pageattr.c
@@ -367,20 +367,4 @@ void __kernel_map_pages(struct page *page, int numpages, int enable)
 	}
 }
 
-#ifdef CONFIG_HIBERNATION
-bool kernel_page_present(struct page *page)
-{
-	unsigned long addr;
-	int cc;
-
-	addr = page_to_phys(page);
-	asm volatile(
-		"	lra	%1,0(%1)\n"
-		"	ipm	%0\n"
-		"	srl	%0,28"
-		: "=d" (cc), "+a" (addr) : : "cc");
-	return cc == 0;
-}
-#endif /* CONFIG_HIBERNATION */
-
 #endif /* CONFIG_DEBUG_PAGEALLOC */
diff --git a/arch/s390/mm/pgalloc.c b/arch/s390/mm/pgalloc.c
index 3dd253f..498c98a 100644
--- a/arch/s390/mm/pgalloc.c
+++ b/arch/s390/mm/pgalloc.c
@@ -77,67 +77,65 @@ static void __crst_table_upgrade(void *arg)
 
 int crst_table_upgrade(struct mm_struct *mm, unsigned long end)
 {
-	unsigned long *table, *pgd;
-	int rc, notify;
+	unsigned long *pgd = NULL, *p4d = NULL, *__pgd;
+	unsigned long asce_limit = mm->context.asce_limit;
 
 	/* upgrade should only happen from 3 to 4, 3 to 5, or 4 to 5 levels */
-	VM_BUG_ON(mm->context.asce_limit < _REGION2_SIZE);
-	rc = 0;
-	notify = 0;
-	while (mm->context.asce_limit < end) {
-		table = crst_table_alloc(mm);
-		if (!table) {
-			rc = -ENOMEM;
-			break;
-		}
-		spin_lock_bh(&mm->page_table_lock);
-		pgd = (unsigned long *) mm->pgd;
-		if (mm->context.asce_limit == _REGION2_SIZE) {
-			crst_table_init(table, _REGION2_ENTRY_EMPTY);
-			p4d_populate(mm, (p4d_t *) table, (pud_t *) pgd);
-			mm->pgd = (pgd_t *) table;
-			mm->context.asce_limit = _REGION1_SIZE;
-			mm->context.asce = __pa(mm->pgd) | _ASCE_TABLE_LENGTH |
-				_ASCE_USER_BITS | _ASCE_TYPE_REGION2;
-			mm_inc_nr_puds(mm);
-		} else {
-			crst_table_init(table, _REGION1_ENTRY_EMPTY);
-			pgd_populate(mm, (pgd_t *) table, (p4d_t *) pgd);
-			mm->pgd = (pgd_t *) table;
-			mm->context.asce_limit = -PAGE_SIZE;
-			mm->context.asce = __pa(mm->pgd) | _ASCE_TABLE_LENGTH |
-				_ASCE_USER_BITS | _ASCE_TYPE_REGION1;
-		}
-		notify = 1;
-		spin_unlock_bh(&mm->page_table_lock);
+	VM_BUG_ON(asce_limit < _REGION2_SIZE);
+
+	if (end <= asce_limit)
+		return 0;
+
+	if (asce_limit == _REGION2_SIZE) {
+		p4d = crst_table_alloc(mm);
+		if (unlikely(!p4d))
+			goto err_p4d;
+		crst_table_init(p4d, _REGION2_ENTRY_EMPTY);
 	}
-	if (notify)
-		on_each_cpu(__crst_table_upgrade, mm, 0);
-	return rc;
-}
-
-void crst_table_downgrade(struct mm_struct *mm)
-{
-	pgd_t *pgd;
-
-	/* downgrade should only happen from 3 to 2 levels (compat only) */
-	VM_BUG_ON(mm->context.asce_limit != _REGION2_SIZE);
-
-	if (current->active_mm == mm) {
-		clear_user_asce();
-		__tlb_flush_mm(mm);
+	if (end > _REGION1_SIZE) {
+		pgd = crst_table_alloc(mm);
+		if (unlikely(!pgd))
+			goto err_pgd;
+		crst_table_init(pgd, _REGION1_ENTRY_EMPTY);
 	}
 
-	pgd = mm->pgd;
-	mm_dec_nr_pmds(mm);
-	mm->pgd = (pgd_t *) (pgd_val(*pgd) & _REGION_ENTRY_ORIGIN);
-	mm->context.asce_limit = _REGION3_SIZE;
-	mm->context.asce = __pa(mm->pgd) | _ASCE_TABLE_LENGTH |
-			   _ASCE_USER_BITS | _ASCE_TYPE_SEGMENT;
-	crst_table_free(mm, (unsigned long *) pgd);
+	spin_lock_bh(&mm->page_table_lock);
 
-	if (current->active_mm == mm)
-		set_user_asce(mm);
+	/*
+	 * This routine gets called with mmap_sem lock held and there is
+	 * no reason to optimize for the case of otherwise. However, if
+	 * that would ever change, the below check will let us know.
+	 */
+	VM_BUG_ON(asce_limit != mm->context.asce_limit);
+
+	if (p4d) {
+		__pgd = (unsigned long *) mm->pgd;
+		p4d_populate(mm, (p4d_t *) p4d, (pud_t *) __pgd);
+		mm->pgd = (pgd_t *) p4d;
+		mm->context.asce_limit = _REGION1_SIZE;
+		mm->context.asce = __pa(mm->pgd) | _ASCE_TABLE_LENGTH |
+			_ASCE_USER_BITS | _ASCE_TYPE_REGION2;
+		mm_inc_nr_puds(mm);
+	}
+	if (pgd) {
+		__pgd = (unsigned long *) mm->pgd;
+		pgd_populate(mm, (pgd_t *) pgd, (p4d_t *) __pgd);
+		mm->pgd = (pgd_t *) pgd;
+		mm->context.asce_limit = TASK_SIZE_MAX;
+		mm->context.asce = __pa(mm->pgd) | _ASCE_TABLE_LENGTH |
+			_ASCE_USER_BITS | _ASCE_TYPE_REGION1;
+	}
+
+	spin_unlock_bh(&mm->page_table_lock);
+
+	on_each_cpu(__crst_table_upgrade, mm, 0);
+
+	return 0;
+
+err_pgd:
+	crst_table_free(mm, p4d);
+err_p4d:
+	return -ENOMEM;
 }
 
 static inline unsigned int atomic_xor_bits(atomic_t *v, unsigned int bits)
@@ -304,7 +302,7 @@ void __tlb_remove_table(void *_table)
 		mask >>= 24;
 		if (mask != 0)
 			break;
-		/* fallthrough */
+		fallthrough;
 	case 3:		/* 4K page table with pgstes */
 		if (mask & 3)
 			atomic_xor_bits(&page->_refcount, 3 << 24);
@@ -529,7 +527,7 @@ void base_asce_free(unsigned long asce)
 		base_region2_walk(table, 0, _REGION1_SIZE, 0);
 		break;
 	case _ASCE_TYPE_REGION1:
-		base_region1_walk(table, 0, -_PAGE_SIZE, 0);
+		base_region1_walk(table, 0, TASK_SIZE_MAX, 0);
 		break;
 	}
 	base_crst_free(table);
diff --git a/arch/s390/mm/vmem.c b/arch/s390/mm/vmem.c
index b403fa1..f810930 100644
--- a/arch/s390/mm/vmem.c
+++ b/arch/s390/mm/vmem.c
@@ -415,6 +415,10 @@ void __init vmem_map_init(void)
 		     SET_MEMORY_RO | SET_MEMORY_X);
 	__set_memory(__stext_dma, (__etext_dma - __stext_dma) >> PAGE_SHIFT,
 		     SET_MEMORY_RO | SET_MEMORY_X);
+
+	/* we need lowcore executable for our LPSWE instructions */
+	set_memory_x(0, 1);
+
 	pr_info("Write protected kernel read-only data: %luk\n",
 		(unsigned long)(__end_rodata - _stext) >> 10);
 }
diff --git a/arch/s390/numa/Makefile b/arch/s390/numa/Makefile
index 66c2dff..c89d26f 100644
--- a/arch/s390/numa/Makefile
+++ b/arch/s390/numa/Makefile
@@ -1,4 +1,2 @@
 # SPDX-License-Identifier: GPL-2.0
 obj-y			+= numa.o
-obj-y			+= toptree.o
-obj-$(CONFIG_NUMA_EMU)	+= mode_emu.o
diff --git a/arch/s390/numa/mode_emu.c b/arch/s390/numa/mode_emu.c
deleted file mode 100644
index 72d742b..0000000
--- a/arch/s390/numa/mode_emu.c
+++ /dev/null
@@ -1,577 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * NUMA support for s390
- *
- * NUMA emulation (aka fake NUMA) distributes the available memory to nodes
- * without using real topology information about the physical memory of the
- * machine.
- *
- * It distributes the available CPUs to nodes while respecting the original
- * machine topology information. This is done by trying to avoid to separate
- * CPUs which reside on the same book or even on the same MC.
- *
- * Because the current Linux scheduler code requires a stable cpu to node
- * mapping, cores are pinned to nodes when the first CPU thread is set online.
- *
- * Copyright IBM Corp. 2015
- */
-
-#define KMSG_COMPONENT "numa_emu"
-#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/cpumask.h>
-#include <linux/memblock.h>
-#include <linux/node.h>
-#include <linux/memory.h>
-#include <linux/slab.h>
-#include <asm/smp.h>
-#include <asm/topology.h>
-#include "numa_mode.h"
-#include "toptree.h"
-
-/* Distances between the different system components */
-#define DIST_EMPTY	0
-#define DIST_CORE	1
-#define DIST_MC		2
-#define DIST_BOOK	3
-#define DIST_DRAWER	4
-#define DIST_MAX	5
-
-/* Node distance reported to common code */
-#define EMU_NODE_DIST	10
-
-/* Node ID for free (not yet pinned) cores */
-#define NODE_ID_FREE	-1
-
-/* Different levels of toptree */
-enum toptree_level {CORE, MC, BOOK, DRAWER, NODE, TOPOLOGY};
-
-/* The two toptree IDs */
-enum {TOPTREE_ID_PHYS, TOPTREE_ID_NUMA};
-
-/* Number of NUMA nodes */
-static int emu_nodes = 1;
-/* NUMA stripe size */
-static unsigned long emu_size;
-
-/*
- * Node to core pinning information updates are protected by
- * "sched_domains_mutex".
- */
-static struct {
-	s32 to_node_id[CONFIG_NR_CPUS];	/* Pinned core to node mapping */
-	int total;			/* Total number of pinned cores */
-	int per_node_target;		/* Cores per node without extra cores */
-	int per_node[MAX_NUMNODES];	/* Number of cores pinned to node */
-} *emu_cores;
-
-/*
- * Pin a core to a node
- */
-static void pin_core_to_node(int core_id, int node_id)
-{
-	if (emu_cores->to_node_id[core_id] == NODE_ID_FREE) {
-		emu_cores->per_node[node_id]++;
-		emu_cores->to_node_id[core_id] = node_id;
-		emu_cores->total++;
-	} else {
-		WARN_ON(emu_cores->to_node_id[core_id] != node_id);
-	}
-}
-
-/*
- * Number of pinned cores of a node
- */
-static int cores_pinned(struct toptree *node)
-{
-	return emu_cores->per_node[node->id];
-}
-
-/*
- * ID of the node where the core is pinned (or NODE_ID_FREE)
- */
-static int core_pinned_to_node_id(struct toptree *core)
-{
-	return emu_cores->to_node_id[core->id];
-}
-
-/*
- * Number of cores in the tree that are not yet pinned
- */
-static int cores_free(struct toptree *tree)
-{
-	struct toptree *core;
-	int count = 0;
-
-	toptree_for_each(core, tree, CORE) {
-		if (core_pinned_to_node_id(core) == NODE_ID_FREE)
-			count++;
-	}
-	return count;
-}
-
-/*
- * Return node of core
- */
-static struct toptree *core_node(struct toptree *core)
-{
-	return core->parent->parent->parent->parent;
-}
-
-/*
- * Return drawer of core
- */
-static struct toptree *core_drawer(struct toptree *core)
-{
-	return core->parent->parent->parent;
-}
-
-/*
- * Return book of core
- */
-static struct toptree *core_book(struct toptree *core)
-{
-	return core->parent->parent;
-}
-
-/*
- * Return mc of core
- */
-static struct toptree *core_mc(struct toptree *core)
-{
-	return core->parent;
-}
-
-/*
- * Distance between two cores
- */
-static int dist_core_to_core(struct toptree *core1, struct toptree *core2)
-{
-	if (core_drawer(core1)->id != core_drawer(core2)->id)
-		return DIST_DRAWER;
-	if (core_book(core1)->id != core_book(core2)->id)
-		return DIST_BOOK;
-	if (core_mc(core1)->id != core_mc(core2)->id)
-		return DIST_MC;
-	/* Same core or sibling on same MC */
-	return DIST_CORE;
-}
-
-/*
- * Distance of a node to a core
- */
-static int dist_node_to_core(struct toptree *node, struct toptree *core)
-{
-	struct toptree *core_node;
-	int dist_min = DIST_MAX;
-
-	toptree_for_each(core_node, node, CORE)
-		dist_min = min(dist_min, dist_core_to_core(core_node, core));
-	return dist_min == DIST_MAX ? DIST_EMPTY : dist_min;
-}
-
-/*
- * Unify will delete empty nodes, therefore recreate nodes.
- */
-static void toptree_unify_tree(struct toptree *tree)
-{
-	int nid;
-
-	toptree_unify(tree);
-	for (nid = 0; nid < emu_nodes; nid++)
-		toptree_get_child(tree, nid);
-}
-
-/*
- * Find the best/nearest node for a given core and ensure that no node
- * gets more than "emu_cores->per_node_target + extra" cores.
- */
-static struct toptree *node_for_core(struct toptree *numa, struct toptree *core,
-				     int extra)
-{
-	struct toptree *node, *node_best = NULL;
-	int dist_cur, dist_best, cores_target;
-
-	cores_target = emu_cores->per_node_target + extra;
-	dist_best = DIST_MAX;
-	node_best = NULL;
-	toptree_for_each(node, numa, NODE) {
-		/* Already pinned cores must use their nodes */
-		if (core_pinned_to_node_id(core) == node->id) {
-			node_best = node;
-			break;
-		}
-		/* Skip nodes that already have enough cores */
-		if (cores_pinned(node) >= cores_target)
-			continue;
-		dist_cur = dist_node_to_core(node, core);
-		if (dist_cur < dist_best) {
-			dist_best = dist_cur;
-			node_best = node;
-		}
-	}
-	return node_best;
-}
-
-/*
- * Find the best node for each core with respect to "extra" core count
- */
-static void toptree_to_numa_single(struct toptree *numa, struct toptree *phys,
-				   int extra)
-{
-	struct toptree *node, *core, *tmp;
-
-	toptree_for_each_safe(core, tmp, phys, CORE) {
-		node = node_for_core(numa, core, extra);
-		if (!node)
-			return;
-		toptree_move(core, node);
-		pin_core_to_node(core->id, node->id);
-	}
-}
-
-/*
- * Move structures of given level to specified NUMA node
- */
-static void move_level_to_numa_node(struct toptree *node, struct toptree *phys,
-				    enum toptree_level level, bool perfect)
-{
-	int cores_free, cores_target = emu_cores->per_node_target;
-	struct toptree *cur, *tmp;
-
-	toptree_for_each_safe(cur, tmp, phys, level) {
-		cores_free = cores_target - toptree_count(node, CORE);
-		if (perfect) {
-			if (cores_free == toptree_count(cur, CORE))
-				toptree_move(cur, node);
-		} else {
-			if (cores_free >= toptree_count(cur, CORE))
-				toptree_move(cur, node);
-		}
-	}
-}
-
-/*
- * Move structures of a given level to NUMA nodes. If "perfect" is specified
- * move only perfectly fitting structures. Otherwise move also smaller
- * than needed structures.
- */
-static void move_level_to_numa(struct toptree *numa, struct toptree *phys,
-			       enum toptree_level level, bool perfect)
-{
-	struct toptree *node;
-
-	toptree_for_each(node, numa, NODE)
-		move_level_to_numa_node(node, phys, level, perfect);
-}
-
-/*
- * For the first run try to move the big structures
- */
-static void toptree_to_numa_first(struct toptree *numa, struct toptree *phys)
-{
-	struct toptree *core;
-
-	/* Always try to move perfectly fitting structures first */
-	move_level_to_numa(numa, phys, DRAWER, true);
-	move_level_to_numa(numa, phys, DRAWER, false);
-	move_level_to_numa(numa, phys, BOOK, true);
-	move_level_to_numa(numa, phys, BOOK, false);
-	move_level_to_numa(numa, phys, MC, true);
-	move_level_to_numa(numa, phys, MC, false);
-	/* Now pin all the moved cores */
-	toptree_for_each(core, numa, CORE)
-		pin_core_to_node(core->id, core_node(core)->id);
-}
-
-/*
- * Allocate new topology and create required nodes
- */
-static struct toptree *toptree_new(int id, int nodes)
-{
-	struct toptree *tree;
-	int nid;
-
-	tree = toptree_alloc(TOPOLOGY, id);
-	if (!tree)
-		goto fail;
-	for (nid = 0; nid < nodes; nid++) {
-		if (!toptree_get_child(tree, nid))
-			goto fail;
-	}
-	return tree;
-fail:
-	panic("NUMA emulation could not allocate topology");
-}
-
-/*
- * Allocate and initialize core to node mapping
- */
-static void __ref create_core_to_node_map(void)
-{
-	int i;
-
-	emu_cores = memblock_alloc(sizeof(*emu_cores), 8);
-	if (!emu_cores)
-		panic("%s: Failed to allocate %zu bytes align=0x%x\n",
-		      __func__, sizeof(*emu_cores), 8);
-	for (i = 0; i < ARRAY_SIZE(emu_cores->to_node_id); i++)
-		emu_cores->to_node_id[i] = NODE_ID_FREE;
-}
-
-/*
- * Move cores from physical topology into NUMA target topology
- * and try to keep as much of the physical topology as possible.
- */
-static struct toptree *toptree_to_numa(struct toptree *phys)
-{
-	static int first = 1;
-	struct toptree *numa;
-	int cores_total;
-
-	cores_total = emu_cores->total + cores_free(phys);
-	emu_cores->per_node_target = cores_total / emu_nodes;
-	numa = toptree_new(TOPTREE_ID_NUMA, emu_nodes);
-	if (first) {
-		toptree_to_numa_first(numa, phys);
-		first = 0;
-	}
-	toptree_to_numa_single(numa, phys, 0);
-	toptree_to_numa_single(numa, phys, 1);
-	toptree_unify_tree(numa);
-
-	WARN_ON(cpumask_weight(&phys->mask));
-	return numa;
-}
-
-/*
- * Create a toptree out of the physical topology that we got from the hypervisor
- */
-static struct toptree *toptree_from_topology(void)
-{
-	struct toptree *phys, *node, *drawer, *book, *mc, *core;
-	struct cpu_topology_s390 *top;
-	int cpu;
-
-	phys = toptree_new(TOPTREE_ID_PHYS, 1);
-
-	for_each_cpu(cpu, &cpus_with_topology) {
-		top = &cpu_topology[cpu];
-		node = toptree_get_child(phys, 0);
-		drawer = toptree_get_child(node, top->drawer_id);
-		book = toptree_get_child(drawer, top->book_id);
-		mc = toptree_get_child(book, top->socket_id);
-		core = toptree_get_child(mc, smp_get_base_cpu(cpu));
-		if (!drawer || !book || !mc || !core)
-			panic("NUMA emulation could not allocate memory");
-		cpumask_set_cpu(cpu, &core->mask);
-		toptree_update_mask(mc);
-	}
-	return phys;
-}
-
-/*
- * Add toptree core to topology and create correct CPU masks
- */
-static void topology_add_core(struct toptree *core)
-{
-	struct cpu_topology_s390 *top;
-	int cpu;
-
-	for_each_cpu(cpu, &core->mask) {
-		top = &cpu_topology[cpu];
-		cpumask_copy(&top->thread_mask, &core->mask);
-		cpumask_copy(&top->core_mask, &core_mc(core)->mask);
-		cpumask_copy(&top->book_mask, &core_book(core)->mask);
-		cpumask_copy(&top->drawer_mask, &core_drawer(core)->mask);
-		cpumask_set_cpu(cpu, &node_to_cpumask_map[core_node(core)->id]);
-		top->node_id = core_node(core)->id;
-	}
-}
-
-/*
- * Apply toptree to topology and create CPU masks
- */
-static void toptree_to_topology(struct toptree *numa)
-{
-	struct toptree *core;
-	int i;
-
-	/* Clear all node masks */
-	for (i = 0; i < MAX_NUMNODES; i++)
-		cpumask_clear(&node_to_cpumask_map[i]);
-
-	/* Rebuild all masks */
-	toptree_for_each(core, numa, CORE)
-		topology_add_core(core);
-}
-
-/*
- * Show the node to core mapping
- */
-static void print_node_to_core_map(void)
-{
-	int nid, cid;
-
-	if (!numa_debug_enabled)
-		return;
-	printk(KERN_DEBUG "NUMA node to core mapping\n");
-	for (nid = 0; nid < emu_nodes; nid++) {
-		printk(KERN_DEBUG "  node %3d: ", nid);
-		for (cid = 0; cid < ARRAY_SIZE(emu_cores->to_node_id); cid++) {
-			if (emu_cores->to_node_id[cid] == nid)
-				printk(KERN_CONT "%d ", cid);
-		}
-		printk(KERN_CONT "\n");
-	}
-}
-
-static void pin_all_possible_cpus(void)
-{
-	int core_id, node_id, cpu;
-	static int initialized;
-
-	if (initialized)
-		return;
-	print_node_to_core_map();
-	node_id = 0;
-	for_each_possible_cpu(cpu) {
-		core_id = smp_get_base_cpu(cpu);
-		if (emu_cores->to_node_id[core_id] != NODE_ID_FREE)
-			continue;
-		pin_core_to_node(core_id, node_id);
-		cpu_topology[cpu].node_id = node_id;
-		node_id = (node_id + 1) % emu_nodes;
-	}
-	print_node_to_core_map();
-	initialized = 1;
-}
-
-/*
- * Transfer physical topology into a NUMA topology and modify CPU masks
- * according to the NUMA topology.
- *
- * Must be called with "sched_domains_mutex" lock held.
- */
-static void emu_update_cpu_topology(void)
-{
-	struct toptree *phys, *numa;
-
-	if (emu_cores == NULL)
-		create_core_to_node_map();
-	phys = toptree_from_topology();
-	numa = toptree_to_numa(phys);
-	toptree_free(phys);
-	toptree_to_topology(numa);
-	toptree_free(numa);
-	pin_all_possible_cpus();
-}
-
-/*
- * If emu_size is not set, use CONFIG_EMU_SIZE. Then round to minimum
- * alignment (needed for memory hotplug).
- */
-static unsigned long emu_setup_size_adjust(unsigned long size)
-{
-	unsigned long size_new;
-
-	size = size ? : CONFIG_EMU_SIZE;
-	size_new = roundup(size, memory_block_size_bytes());
-	if (size_new == size)
-		return size;
-	pr_warn("Increasing memory stripe size from %ld MB to %ld MB\n",
-		size >> 20, size_new >> 20);
-	return size_new;
-}
-
-/*
- * If we have not enough memory for the specified nodes, reduce the node count.
- */
-static int emu_setup_nodes_adjust(int nodes)
-{
-	int nodes_max;
-
-	nodes_max = memblock.memory.total_size / emu_size;
-	nodes_max = max(nodes_max, 1);
-	if (nodes_max >= nodes)
-		return nodes;
-	pr_warn("Not enough memory for %d nodes, reducing node count\n", nodes);
-	return nodes_max;
-}
-
-/*
- * Early emu setup
- */
-static void emu_setup(void)
-{
-	int nid;
-
-	emu_size = emu_setup_size_adjust(emu_size);
-	emu_nodes = emu_setup_nodes_adjust(emu_nodes);
-	for (nid = 0; nid < emu_nodes; nid++)
-		node_set(nid, node_possible_map);
-	pr_info("Creating %d nodes with memory stripe size %ld MB\n",
-		emu_nodes, emu_size >> 20);
-}
-
-/*
- * Return node id for given page number
- */
-static int emu_pfn_to_nid(unsigned long pfn)
-{
-	return (pfn / (emu_size >> PAGE_SHIFT)) % emu_nodes;
-}
-
-/*
- * Return stripe size
- */
-static unsigned long emu_align(void)
-{
-	return emu_size;
-}
-
-/*
- * Return distance between two nodes
- */
-static int emu_distance(int node1, int node2)
-{
-	return (node1 != node2) * EMU_NODE_DIST;
-}
-
-/*
- * Define callbacks for generic s390 NUMA infrastructure
- */
-const struct numa_mode numa_mode_emu = {
-	.name = "emu",
-	.setup = emu_setup,
-	.update_cpu_topology = emu_update_cpu_topology,
-	.__pfn_to_nid = emu_pfn_to_nid,
-	.align = emu_align,
-	.distance = emu_distance,
-};
-
-/*
- * Kernel parameter: emu_nodes=<n>
- */
-static int __init early_parse_emu_nodes(char *p)
-{
-	int count;
-
-	if (!p || kstrtoint(p, 0, &count) != 0 || count <= 0)
-		return 0;
-	emu_nodes = min(count, MAX_NUMNODES);
-	return 0;
-}
-early_param("emu_nodes", early_parse_emu_nodes);
-
-/*
- * Kernel parameter: emu_size=[<n>[k|M|G|T]]
- */
-static int __init early_parse_emu_size(char *p)
-{
-	if (p)
-		emu_size = memparse(p, NULL);
-	return 0;
-}
-early_param("emu_size", early_parse_emu_size);
diff --git a/arch/s390/numa/numa.c b/arch/s390/numa/numa.c
index d2910fa..51c5a9f 100644
--- a/arch/s390/numa/numa.c
+++ b/arch/s390/numa/numa.c
@@ -7,165 +7,36 @@
  * Copyright IBM Corp. 2015
  */
 
-#define KMSG_COMPONENT "numa"
-#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
-
 #include <linux/kernel.h>
 #include <linux/mmzone.h>
 #include <linux/cpumask.h>
 #include <linux/memblock.h>
-#include <linux/slab.h>
 #include <linux/node.h>
-
 #include <asm/numa.h>
-#include "numa_mode.h"
 
-pg_data_t *node_data[MAX_NUMNODES];
+struct pglist_data *node_data[MAX_NUMNODES];
 EXPORT_SYMBOL(node_data);
 
-cpumask_t node_to_cpumask_map[MAX_NUMNODES];
-EXPORT_SYMBOL(node_to_cpumask_map);
-
-static void plain_setup(void)
+void __init numa_setup(void)
 {
+	int nid;
+
+	nodes_clear(node_possible_map);
 	node_set(0, node_possible_map);
-}
-
-const struct numa_mode numa_mode_plain = {
-	.name = "plain",
-	.setup = plain_setup,
-};
-
-static const struct numa_mode *mode = &numa_mode_plain;
-
-int numa_pfn_to_nid(unsigned long pfn)
-{
-	return mode->__pfn_to_nid ? mode->__pfn_to_nid(pfn) : 0;
-}
-
-void numa_update_cpu_topology(void)
-{
-	if (mode->update_cpu_topology)
-		mode->update_cpu_topology();
-}
-
-int __node_distance(int a, int b)
-{
-	return mode->distance ? mode->distance(a, b) : 0;
-}
-EXPORT_SYMBOL(__node_distance);
-
-int numa_debug_enabled;
-
-/*
- * numa_setup_memory() - Assign bootmem to nodes
- *
- * The memory is first added to memblock without any respect to nodes.
- * This is fixed before remaining memblock memory is handed over to the
- * buddy allocator.
- * An important side effect is that large bootmem allocations might easily
- * cross node boundaries, which can be needed for large allocations with
- * smaller memory stripes in each node (i.e. when using NUMA emulation).
- *
- * Memory defines nodes:
- * Therefore this routine also sets the nodes online with memory.
- */
-static void __init numa_setup_memory(void)
-{
-	unsigned long cur_base, align, end_of_dram;
-	int nid = 0;
-
-	end_of_dram = memblock_end_of_DRAM();
-	align = mode->align ? mode->align() : ULONG_MAX;
-
-	/*
-	 * Step through all available memory and assign it to the nodes
-	 * indicated by the mode implementation.
-	 * All nodes which are seen here will be set online.
-	 */
-	cur_base = 0;
-	do {
-		nid = numa_pfn_to_nid(PFN_DOWN(cur_base));
-		node_set_online(nid);
-		memblock_set_node(cur_base, align, &memblock.memory, nid);
-		cur_base += align;
-	} while (cur_base < end_of_dram);
-
-	/* Allocate and fill out node_data */
+	node_set_online(0);
 	for (nid = 0; nid < MAX_NUMNODES; nid++) {
 		NODE_DATA(nid) = memblock_alloc(sizeof(pg_data_t), 8);
 		if (!NODE_DATA(nid))
 			panic("%s: Failed to allocate %zu bytes align=0x%x\n",
 			      __func__, sizeof(pg_data_t), 8);
 	}
-
-	for_each_online_node(nid) {
-		unsigned long start_pfn, end_pfn;
-		unsigned long t_start, t_end;
-		int i;
-
-		start_pfn = ULONG_MAX;
-		end_pfn = 0;
-		for_each_mem_pfn_range(i, nid, &t_start, &t_end, NULL) {
-			if (t_start < start_pfn)
-				start_pfn = t_start;
-			if (t_end > end_pfn)
-				end_pfn = t_end;
-		}
-		NODE_DATA(nid)->node_spanned_pages = end_pfn - start_pfn;
-		NODE_DATA(nid)->node_id = nid;
-	}
+	NODE_DATA(0)->node_spanned_pages = memblock_end_of_DRAM() >> PAGE_SHIFT;
+	NODE_DATA(0)->node_id = 0;
 }
 
-/*
- * numa_setup() - Earliest initialization
- *
- * Assign the mode and call the mode's setup routine.
- */
-void __init numa_setup(void)
-{
-	pr_info("NUMA mode: %s\n", mode->name);
-	nodes_clear(node_possible_map);
-	/* Initially attach all possible CPUs to node 0. */
-	cpumask_copy(&node_to_cpumask_map[0], cpu_possible_mask);
-	if (mode->setup)
-		mode->setup();
-	numa_setup_memory();
-	memblock_dump_all();
-}
-
-/*
- * numa_init_late() - Initialization initcall
- *
- * Register NUMA nodes.
- */
 static int __init numa_init_late(void)
 {
-	int nid;
-
-	for_each_online_node(nid)
-		register_one_node(nid);
+	register_one_node(0);
 	return 0;
 }
 arch_initcall(numa_init_late);
-
-static int __init parse_debug(char *parm)
-{
-	numa_debug_enabled = 1;
-	return 0;
-}
-early_param("numa_debug", parse_debug);
-
-static int __init parse_numa(char *parm)
-{
-	if (!parm)
-		return 1;
-	if (strcmp(parm, numa_mode_plain.name) == 0)
-		mode = &numa_mode_plain;
-#ifdef CONFIG_NUMA_EMU
-	if (strcmp(parm, numa_mode_emu.name) == 0)
-		mode = &numa_mode_emu;
-#endif
-	return 0;
-}
-early_param("numa", parse_numa);
diff --git a/arch/s390/numa/numa_mode.h b/arch/s390/numa/numa_mode.h
deleted file mode 100644
index dfd3e27..0000000
--- a/arch/s390/numa/numa_mode.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * NUMA support for s390
- *
- * Define declarations used for communication between NUMA mode
- * implementations and NUMA core functionality.
- *
- * Copyright IBM Corp. 2015
- */
-#ifndef __S390_NUMA_MODE_H
-#define __S390_NUMA_MODE_H
-
-struct numa_mode {
-	char *name;				/* Name of mode */
-	void (*setup)(void);			/* Initizalize mode */
-	void (*update_cpu_topology)(void);	/* Called by topology code */
-	int (*__pfn_to_nid)(unsigned long pfn);	/* PFN to node ID */
-	unsigned long (*align)(void);		/* Minimum node alignment */
-	int (*distance)(int a, int b);		/* Distance between two nodes */
-};
-
-extern const struct numa_mode numa_mode_plain;
-extern const struct numa_mode numa_mode_emu;
-
-#endif /* __S390_NUMA_MODE_H */
diff --git a/arch/s390/numa/toptree.c b/arch/s390/numa/toptree.c
deleted file mode 100644
index 71a608c..0000000
--- a/arch/s390/numa/toptree.c
+++ /dev/null
@@ -1,351 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * NUMA support for s390
- *
- * A tree structure used for machine topology mangling
- *
- * Copyright IBM Corp. 2015
- */
-
-#include <linux/kernel.h>
-#include <linux/memblock.h>
-#include <linux/cpumask.h>
-#include <linux/list.h>
-#include <linux/list_sort.h>
-#include <linux/slab.h>
-#include <asm/numa.h>
-
-#include "toptree.h"
-
-/**
- * toptree_alloc - Allocate and initialize a new tree node.
- * @level: The node's vertical level; level 0 contains the leaves.
- * @id: ID number, explicitly not unique beyond scope of node's siblings
- *
- * Allocate a new tree node and initialize it.
- *
- * RETURNS:
- * Pointer to the new tree node or NULL on error
- */
-struct toptree __ref *toptree_alloc(int level, int id)
-{
-	struct toptree *res;
-
-	if (slab_is_available())
-		res = kzalloc(sizeof(*res), GFP_KERNEL);
-	else
-		res = memblock_alloc(sizeof(*res), 8);
-	if (!res)
-		return res;
-
-	INIT_LIST_HEAD(&res->children);
-	INIT_LIST_HEAD(&res->sibling);
-	cpumask_clear(&res->mask);
-	res->level = level;
-	res->id = id;
-	return res;
-}
-
-/**
- * toptree_remove - Remove a tree node from a tree
- * @cand: Pointer to the node to remove
- *
- * The node is detached from its parent node. The parent node's
- * masks will be updated to reflect the loss of the child.
- */
-static void toptree_remove(struct toptree *cand)
-{
-	struct toptree *oldparent;
-
-	list_del_init(&cand->sibling);
-	oldparent = cand->parent;
-	cand->parent = NULL;
-	toptree_update_mask(oldparent);
-}
-
-/**
- * toptree_free - discard a tree node
- * @cand: Pointer to the tree node to discard
- *
- * Checks if @cand is attached to a parent node. Detaches it
- * cleanly using toptree_remove. Possible children are freed
- * recursively. In the end @cand itself is freed.
- */
-void __ref toptree_free(struct toptree *cand)
-{
-	struct toptree *child, *tmp;
-
-	if (cand->parent)
-		toptree_remove(cand);
-	toptree_for_each_child_safe(child, tmp, cand)
-		toptree_free(child);
-	if (slab_is_available())
-		kfree(cand);
-	else
-		memblock_free_early((unsigned long)cand, sizeof(*cand));
-}
-
-/**
- * toptree_update_mask - Update node bitmasks
- * @cand: Pointer to a tree node
- *
- * The node's cpumask will be updated by combining all children's
- * masks. Then toptree_update_mask is called recursively for the
- * parent if applicable.
- *
- * NOTE:
- * This must not be called on leaves. If called on a leaf, its
- * CPU mask is cleared and lost.
- */
-void toptree_update_mask(struct toptree *cand)
-{
-	struct toptree *child;
-
-	cpumask_clear(&cand->mask);
-	list_for_each_entry(child, &cand->children, sibling)
-		cpumask_or(&cand->mask, &cand->mask, &child->mask);
-	if (cand->parent)
-		toptree_update_mask(cand->parent);
-}
-
-/**
- * toptree_insert - Insert a tree node into tree
- * @cand: Pointer to the node to insert
- * @target: Pointer to the node to which @cand will added as a child
- *
- * Insert a tree node into a tree. Masks will be updated automatically.
- *
- * RETURNS:
- * 0 on success, -1 if NULL is passed as argument or the node levels
- * don't fit.
- */
-static int toptree_insert(struct toptree *cand, struct toptree *target)
-{
-	if (!cand || !target)
-		return -1;
-	if (target->level != (cand->level + 1))
-		return -1;
-	list_add_tail(&cand->sibling, &target->children);
-	cand->parent = target;
-	toptree_update_mask(target);
-	return 0;
-}
-
-/**
- * toptree_move_children - Move all child nodes of a node to a new place
- * @cand: Pointer to the node whose children are to be moved
- * @target: Pointer to the node to which @cand's children will be attached
- *
- * Take all child nodes of @cand and move them using toptree_move.
- */
-static void toptree_move_children(struct toptree *cand, struct toptree *target)
-{
-	struct toptree *child, *tmp;
-
-	toptree_for_each_child_safe(child, tmp, cand)
-		toptree_move(child, target);
-}
-
-/**
- * toptree_unify - Merge children with same ID
- * @cand: Pointer to node whose direct children should be made unique
- *
- * When mangling the tree it is possible that a node has two or more children
- * which have the same ID. This routine merges these children into one and
- * moves all children of the merged nodes into the unified node.
- */
-void toptree_unify(struct toptree *cand)
-{
-	struct toptree *child, *tmp, *cand_copy;
-
-	/* Threads cannot be split, cores are not split */
-	if (cand->level < 2)
-		return;
-
-	cand_copy = toptree_alloc(cand->level, 0);
-	toptree_for_each_child_safe(child, tmp, cand) {
-		struct toptree *tmpchild;
-
-		if (!cpumask_empty(&child->mask)) {
-			tmpchild = toptree_get_child(cand_copy, child->id);
-			toptree_move_children(child, tmpchild);
-		}
-		toptree_free(child);
-	}
-	toptree_move_children(cand_copy, cand);
-	toptree_free(cand_copy);
-
-	toptree_for_each_child(child, cand)
-		toptree_unify(child);
-}
-
-/**
- * toptree_move - Move a node to another context
- * @cand: Pointer to the node to move
- * @target: Pointer to the node where @cand should go
- *
- * In the easiest case @cand is exactly on the level below @target
- * and will be immediately moved to the target.
- *
- * If @target's level is not the direct parent level of @cand,
- * nodes for the missing levels are created and put between
- * @cand and @target. The "stacking" nodes' IDs are taken from
- * @cand's parents.
- *
- * After this it is likely to have redundant nodes in the tree
- * which are addressed by means of toptree_unify.
- */
-void toptree_move(struct toptree *cand, struct toptree *target)
-{
-	struct toptree *stack_target, *real_insert_point, *ptr, *tmp;
-
-	if (cand->level + 1 == target->level) {
-		toptree_remove(cand);
-		toptree_insert(cand, target);
-		return;
-	}
-
-	real_insert_point = NULL;
-	ptr = cand;
-	stack_target = NULL;
-
-	do {
-		tmp = stack_target;
-		stack_target = toptree_alloc(ptr->level + 1,
-					     ptr->parent->id);
-		toptree_insert(tmp, stack_target);
-		if (!real_insert_point)
-			real_insert_point = stack_target;
-		ptr = ptr->parent;
-	} while (stack_target->level < (target->level - 1));
-
-	toptree_remove(cand);
-	toptree_insert(cand, real_insert_point);
-	toptree_insert(stack_target, target);
-}
-
-/**
- * toptree_get_child - Access a tree node's child by its ID
- * @cand: Pointer to tree node whose child is to access
- * @id: The desired child's ID
- *
- * @cand's children are searched for a child with matching ID.
- * If no match can be found, a new child with the desired ID
- * is created and returned.
- */
-struct toptree *toptree_get_child(struct toptree *cand, int id)
-{
-	struct toptree *child;
-
-	toptree_for_each_child(child, cand)
-		if (child->id == id)
-			return child;
-	child = toptree_alloc(cand->level-1, id);
-	toptree_insert(child, cand);
-	return child;
-}
-
-/**
- * toptree_first - Find the first descendant on specified level
- * @context: Pointer to tree node whose descendants are to be used
- * @level: The level of interest
- *
- * RETURNS:
- * @context's first descendant on the specified level, or NULL
- * if there is no matching descendant
- */
-struct toptree *toptree_first(struct toptree *context, int level)
-{
-	struct toptree *child, *tmp;
-
-	if (context->level == level)
-		return context;
-
-	if (!list_empty(&context->children)) {
-		list_for_each_entry(child, &context->children, sibling) {
-			tmp = toptree_first(child, level);
-			if (tmp)
-				return tmp;
-		}
-	}
-	return NULL;
-}
-
-/**
- * toptree_next_sibling - Return next sibling
- * @cur: Pointer to a tree node
- *
- * RETURNS:
- * If @cur has a parent and is not the last in the parent's children list,
- * the next sibling is returned. Or NULL when there are no siblings left.
- */
-static struct toptree *toptree_next_sibling(struct toptree *cur)
-{
-	if (cur->parent == NULL)
-		return NULL;
-
-	if (cur == list_last_entry(&cur->parent->children,
-				   struct toptree, sibling))
-		return NULL;
-	return (struct toptree *) list_next_entry(cur, sibling);
-}
-
-/**
- * toptree_next - Tree traversal function
- * @cur: Pointer to current element
- * @context: Pointer to the root node of the tree or subtree to
- * be traversed.
- * @level: The level of interest.
- *
- * RETURNS:
- * Pointer to the next node on level @level
- * or NULL when there is no next node.
- */
-struct toptree *toptree_next(struct toptree *cur, struct toptree *context,
-			     int level)
-{
-	struct toptree *cur_context, *tmp;
-
-	if (!cur)
-		return NULL;
-
-	if (context->level == level)
-		return NULL;
-
-	tmp = toptree_next_sibling(cur);
-	if (tmp != NULL)
-		return tmp;
-
-	cur_context = cur;
-	while (cur_context->level < context->level - 1) {
-		/* Step up */
-		cur_context = cur_context->parent;
-		/* Step aside */
-		tmp = toptree_next_sibling(cur_context);
-		if (tmp != NULL) {
-			/* Step down */
-			tmp = toptree_first(tmp, level);
-			if (tmp != NULL)
-				return tmp;
-		}
-	}
-	return NULL;
-}
-
-/**
- * toptree_count - Count descendants on specified level
- * @context: Pointer to node whose descendants are to be considered
- * @level: Only descendants on the specified level will be counted
- *
- * RETURNS:
- * Number of descendants on the specified level
- */
-int toptree_count(struct toptree *context, int level)
-{
-	struct toptree *cur;
-	int cnt = 0;
-
-	toptree_for_each(cur, context, level)
-		cnt++;
-	return cnt;
-}
diff --git a/arch/s390/numa/toptree.h b/arch/s390/numa/toptree.h
deleted file mode 100644
index 5246371..0000000
--- a/arch/s390/numa/toptree.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * NUMA support for s390
- *
- * A tree structure used for machine topology mangling
- *
- * Copyright IBM Corp. 2015
- */
-#ifndef S390_TOPTREE_H
-#define S390_TOPTREE_H
-
-#include <linux/cpumask.h>
-#include <linux/list.h>
-
-struct toptree {
-	int level;
-	int id;
-	cpumask_t mask;
-	struct toptree *parent;
-	struct list_head sibling;
-	struct list_head children;
-};
-
-struct toptree *toptree_alloc(int level, int id);
-void toptree_free(struct toptree *cand);
-void toptree_update_mask(struct toptree *cand);
-void toptree_unify(struct toptree *cand);
-struct toptree *toptree_get_child(struct toptree *cand, int id);
-void toptree_move(struct toptree *cand, struct toptree *target);
-int toptree_count(struct toptree *context, int level);
-
-struct toptree *toptree_first(struct toptree *context, int level);
-struct toptree *toptree_next(struct toptree *cur, struct toptree *context,
-			     int level);
-
-#define toptree_for_each_child(child, ptree)				\
-	list_for_each_entry(child,  &ptree->children, sibling)
-
-#define toptree_for_each_child_safe(child, ptmp, ptree)			\
-	list_for_each_entry_safe(child, ptmp, &ptree->children, sibling)
-
-#define toptree_is_last(ptree)					\
-	((ptree->parent == NULL) ||				\
-	 (ptree->parent->children.prev == &ptree->sibling))
-
-#define toptree_for_each(ptree, cont, ttype)		\
-	for (ptree = toptree_first(cont, ttype);	\
-	     ptree != NULL;				\
-	     ptree = toptree_next(ptree, cont, ttype))
-
-#define toptree_for_each_safe(ptree, tmp, cont, ttype)		\
-	for (ptree = toptree_first(cont, ttype),		\
-		     tmp = toptree_next(ptree, cont, ttype);	\
-	     ptree != NULL;					\
-	     ptree = tmp,					\
-		     tmp = toptree_next(ptree, cont, ttype))
-
-#define toptree_for_each_sibling(ptree, start)			\
-	toptree_for_each(ptree, start->parent, start->level)
-
-#endif /* S390_TOPTREE_H */
diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
index 60716d1..94ca121 100644
--- a/arch/s390/pci/pci.c
+++ b/arch/s390/pci/pci.c
@@ -40,8 +40,9 @@
 static LIST_HEAD(zpci_list);
 static DEFINE_SPINLOCK(zpci_list_lock);
 
-static DECLARE_BITMAP(zpci_domain, ZPCI_NR_DEVICES);
+static DECLARE_BITMAP(zpci_domain, ZPCI_DOMAIN_BITMAP_SIZE);
 static DEFINE_SPINLOCK(zpci_domain_lock);
+static unsigned int zpci_num_domains_allocated;
 
 #define ZPCI_IOMAP_ENTRIES						\
 	min(((unsigned long) ZPCI_NR_DEVICES * PCI_STD_NUM_BARS / 2),	\
@@ -607,57 +608,25 @@ void pcibios_disable_device(struct pci_dev *pdev)
 	zpci_debug_exit_device(zdev);
 }
 
-#ifdef CONFIG_HIBERNATE_CALLBACKS
-static int zpci_restore(struct device *dev)
-{
-	struct pci_dev *pdev = to_pci_dev(dev);
-	struct zpci_dev *zdev = to_zpci(pdev);
-	int ret = 0;
-
-	if (zdev->state != ZPCI_FN_STATE_ONLINE)
-		goto out;
-
-	ret = clp_enable_fh(zdev, ZPCI_NR_DMA_SPACES);
-	if (ret)
-		goto out;
-
-	zpci_map_resources(pdev);
-	zpci_register_ioat(zdev, 0, zdev->start_dma, zdev->end_dma,
-			   (u64) zdev->dma_table);
-
-out:
-	return ret;
-}
-
-static int zpci_freeze(struct device *dev)
-{
-	struct pci_dev *pdev = to_pci_dev(dev);
-	struct zpci_dev *zdev = to_zpci(pdev);
-
-	if (zdev->state != ZPCI_FN_STATE_ONLINE)
-		return 0;
-
-	zpci_unregister_ioat(zdev, 0);
-	zpci_unmap_resources(pdev);
-	return clp_disable_fh(zdev);
-}
-
-struct dev_pm_ops pcibios_pm_ops = {
-	.thaw_noirq = zpci_restore,
-	.freeze_noirq = zpci_freeze,
-	.restore_noirq = zpci_restore,
-	.poweroff_noirq = zpci_freeze,
-};
-#endif /* CONFIG_HIBERNATE_CALLBACKS */
-
 static int zpci_alloc_domain(struct zpci_dev *zdev)
 {
+	spin_lock(&zpci_domain_lock);
+	if (zpci_num_domains_allocated > (ZPCI_NR_DEVICES - 1)) {
+		spin_unlock(&zpci_domain_lock);
+		pr_err("Adding PCI function %08x failed because the configured limit of %d is reached\n",
+			zdev->fid, ZPCI_NR_DEVICES);
+		return -ENOSPC;
+	}
+
 	if (zpci_unique_uid) {
 		zdev->domain = (u16) zdev->uid;
-		if (zdev->domain >= ZPCI_NR_DEVICES)
-			return 0;
+		if (zdev->domain == 0) {
+			pr_warn("UID checking is active but no UID is set for PCI function %08x, so automatic domain allocation is used instead\n",
+				zdev->fid);
+			update_uid_checking(false);
+			goto auto_allocate;
+		}
 
-		spin_lock(&zpci_domain_lock);
 		if (test_bit(zdev->domain, zpci_domain)) {
 			spin_unlock(&zpci_domain_lock);
 			pr_err("Adding PCI function %08x failed because domain %04x is already assigned\n",
@@ -665,30 +634,28 @@ static int zpci_alloc_domain(struct zpci_dev *zdev)
 			return -EEXIST;
 		}
 		set_bit(zdev->domain, zpci_domain);
+		zpci_num_domains_allocated++;
 		spin_unlock(&zpci_domain_lock);
 		return 0;
 	}
-
-	spin_lock(&zpci_domain_lock);
+auto_allocate:
+	/*
+	 * We can always auto allocate domains below ZPCI_NR_DEVICES.
+	 * There is either a free domain or we have reached the maximum in
+	 * which case we would have bailed earlier.
+	 */
 	zdev->domain = find_first_zero_bit(zpci_domain, ZPCI_NR_DEVICES);
-	if (zdev->domain == ZPCI_NR_DEVICES) {
-		spin_unlock(&zpci_domain_lock);
-		pr_err("Adding PCI function %08x failed because the configured limit of %d is reached\n",
-			zdev->fid, ZPCI_NR_DEVICES);
-		return -ENOSPC;
-	}
 	set_bit(zdev->domain, zpci_domain);
+	zpci_num_domains_allocated++;
 	spin_unlock(&zpci_domain_lock);
 	return 0;
 }
 
 static void zpci_free_domain(struct zpci_dev *zdev)
 {
-	if (zdev->domain >= ZPCI_NR_DEVICES)
-		return;
-
 	spin_lock(&zpci_domain_lock);
 	clear_bit(zdev->domain, zpci_domain);
+	zpci_num_domains_allocated--;
 	spin_unlock(&zpci_domain_lock);
 }
 
diff --git a/arch/s390/pci/pci_clp.c b/arch/s390/pci/pci_clp.c
index 0d3d8f1..ea794ae 100644
--- a/arch/s390/pci/pci_clp.c
+++ b/arch/s390/pci/pci_clp.c
@@ -24,7 +24,7 @@
 
 bool zpci_unique_uid;
 
-static void update_uid_checking(bool new)
+void update_uid_checking(bool new)
 {
 	if (zpci_unique_uid != new)
 		zpci_dbg(1, "uid checking:%d\n", new);
diff --git a/arch/s390/purgatory/.gitignore b/arch/s390/purgatory/.gitignore
index c82157f..97ca527 100644
--- a/arch/s390/purgatory/.gitignore
+++ b/arch/s390/purgatory/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 purgatory
 purgatory.chk
 purgatory.lds
diff --git a/arch/s390/tools/.gitignore b/arch/s390/tools/.gitignore
index 71bd6f8..ea62f37 100644
--- a/arch/s390/tools/.gitignore
+++ b/arch/s390/tools/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 gen_facilities
 gen_opcode_table
diff --git a/arch/sh/boot/.gitignore b/arch/sh/boot/.gitignore
index f50fdd9..6603bbb 100644
--- a/arch/sh/boot/.gitignore
+++ b/arch/sh/boot/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 zImage
 vmlinux*
 uImage*
diff --git a/arch/sh/boot/compressed/.gitignore b/arch/sh/boot/compressed/.gitignore
index edff113..37aa530 100644
--- a/arch/sh/boot/compressed/.gitignore
+++ b/arch/sh/boot/compressed/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 ashiftrt.S
 ashldi3.c
 ashlsi3.S
diff --git a/arch/sh/configs/sh03_defconfig b/arch/sh/configs/sh03_defconfig
index e5beb62..87db9a8 100644
--- a/arch/sh/configs/sh03_defconfig
+++ b/arch/sh/configs/sh03_defconfig
@@ -46,7 +46,6 @@
 CONFIG_SCSI=m
 CONFIG_BLK_DEV_SD=m
 CONFIG_BLK_DEV_SR=m
-CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
diff --git a/arch/sh/include/asm/bitops-op32.h b/arch/sh/include/asm/bitops-op32.h
index 4668803..cfe5465 100644
--- a/arch/sh/include/asm/bitops-op32.h
+++ b/arch/sh/include/asm/bitops-op32.h
@@ -16,11 +16,9 @@
 #define BYTE_OFFSET(nr)		((nr) % BITS_PER_BYTE)
 #endif
 
-#define IS_IMMEDIATE(nr)	(__builtin_constant_p(nr))
-
 static inline void __set_bit(int nr, volatile unsigned long *addr)
 {
-	if (IS_IMMEDIATE(nr)) {
+	if (__builtin_constant_p(nr)) {
 		__asm__ __volatile__ (
 			"bset.b %1, @(%O2,%0)		! __set_bit\n\t"
 			: "+r" (addr)
@@ -37,7 +35,7 @@ static inline void __set_bit(int nr, volatile unsigned long *addr)
 
 static inline void __clear_bit(int nr, volatile unsigned long *addr)
 {
-	if (IS_IMMEDIATE(nr)) {
+	if (__builtin_constant_p(nr)) {
 		__asm__ __volatile__ (
 			"bclr.b %1, @(%O2,%0)		! __clear_bit\n\t"
 			: "+r" (addr)
@@ -64,7 +62,7 @@ static inline void __clear_bit(int nr, volatile unsigned long *addr)
  */
 static inline void __change_bit(int nr, volatile unsigned long *addr)
 {
-	if (IS_IMMEDIATE(nr)) {
+	if (__builtin_constant_p(nr)) {
 		__asm__ __volatile__ (
 			"bxor.b %1, @(%O2,%0)		! __change_bit\n\t"
 			: "+r" (addr)
diff --git a/arch/sh/include/asm/page.h b/arch/sh/include/asm/page.h
index 5eef8be..ea8d68f 100644
--- a/arch/sh/include/asm/page.h
+++ b/arch/sh/include/asm/page.h
@@ -182,9 +182,6 @@ typedef struct page *pgtable_t;
 #endif
 #define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
 
-#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
-				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
 #include <asm-generic/memory_model.h>
 #include <asm-generic/getorder.h>
 
diff --git a/arch/sh/include/uapi/asm/setup.h b/arch/sh/include/uapi/asm/setup.h
deleted file mode 100644
index 4bd19f8..0000000
--- a/arch/sh/include/uapi/asm/setup.h
+++ /dev/null
@@ -1,2 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#include <asm-generic/setup.h>
diff --git a/arch/sh/include/uapi/asm/types.h b/arch/sh/include/uapi/asm/types.h
deleted file mode 100644
index 68100e1..0000000
--- a/arch/sh/include/uapi/asm/types.h
+++ /dev/null
@@ -1,2 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#include <asm-generic/types.h>
diff --git a/arch/sh/kernel/.gitignore b/arch/sh/kernel/.gitignore
index c5f676c..bbb90f9 100644
--- a/arch/sh/kernel/.gitignore
+++ b/arch/sh/kernel/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 vmlinux.lds
diff --git a/arch/sh/kernel/syscalls/syscallhdr.sh b/arch/sh/kernel/syscalls/syscallhdr.sh
index 1de0334..4c05198 100644
--- a/arch/sh/kernel/syscalls/syscallhdr.sh
+++ b/arch/sh/kernel/syscalls/syscallhdr.sh
@@ -32,5 +32,5 @@
 	printf "#define __NR_syscalls\t%s\n" "${nxt}"
 	printf "#endif\n"
 	printf "\n"
-	printf "#endif /* %s */" "${fileguard}"
+	printf "#endif /* %s */\n" "${fileguard}"
 ) > "$out"
diff --git a/arch/sh/kernel/vsyscall/.gitignore b/arch/sh/kernel/vsyscall/.gitignore
index 40836ad..530a303 100644
--- a/arch/sh/kernel/vsyscall/.gitignore
+++ b/arch/sh/kernel/vsyscall/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 vsyscall.lds
diff --git a/arch/sh/mm/fault.c b/arch/sh/mm/fault.c
index 13ee4d2..5f23d79 100644
--- a/arch/sh/mm/fault.c
+++ b/arch/sh/mm/fault.c
@@ -355,7 +355,7 @@ static inline int access_error(int error_code, struct vm_area_struct *vma)
 		return 1;
 
 	/* read, not present: */
-	if (unlikely(!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE))))
+	if (unlikely(!vma_is_accessible(vma)))
 		return 1;
 
 	return 0;
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index d1b1ff2..b9de2d4 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -406,14 +406,17 @@ void __init mem_init(void)
 
 #ifdef CONFIG_MEMORY_HOTPLUG
 int arch_add_memory(int nid, u64 start, u64 size,
-			struct mhp_restrictions *restrictions)
+		    struct mhp_params *params)
 {
 	unsigned long start_pfn = PFN_DOWN(start);
 	unsigned long nr_pages = size >> PAGE_SHIFT;
 	int ret;
 
+	if (WARN_ON_ONCE(params->pgprot.pgprot != PAGE_KERNEL.pgprot)
+		return -EINVAL;
+
 	/* We only have ZONE_NORMAL, so this is easy.. */
-	ret = __add_pages(nid, start_pfn, nr_pages, restrictions);
+	ret = __add_pages(nid, start_pfn, nr_pages, params);
 	if (unlikely(ret))
 		printk("%s: Failed, __add_pages() == %d\n", __func__, ret);
 
diff --git a/arch/sparc/boot/.gitignore b/arch/sparc/boot/.gitignore
index fc6f398..f3d8569 100644
--- a/arch/sparc/boot/.gitignore
+++ b/arch/sparc/boot/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 btfix.S
 btfixupprep
 image
diff --git a/arch/sparc/configs/sparc64_defconfig b/arch/sparc/configs/sparc64_defconfig
index 6c325d5..bde4d21 100644
--- a/arch/sparc/configs/sparc64_defconfig
+++ b/arch/sparc/configs/sparc64_defconfig
@@ -73,7 +73,6 @@
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=m
-CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
diff --git a/arch/sparc/include/asm/dma-mapping.h b/arch/sparc/include/asm/dma-mapping.h
index ed32845..2f05134 100644
--- a/arch/sparc/include/asm/dma-mapping.h
+++ b/arch/sparc/include/asm/dma-mapping.h
@@ -2,23 +2,12 @@
 #ifndef ___ASM_SPARC_DMA_MAPPING_H
 #define ___ASM_SPARC_DMA_MAPPING_H
 
-#include <asm/cpu_type.h>
-
 extern const struct dma_map_ops *dma_ops;
 
-extern struct bus_type pci_bus_type;
-
 static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
 {
-#ifdef CONFIG_SPARC_LEON
-	if (sparc_cpu_model == sparc_leon)
-		return NULL;
-#endif
-#if defined(CONFIG_SPARC32) && defined(CONFIG_PCI)
-	if (bus == &pci_bus_type)
-		return NULL;
-#endif
-	return dma_ops;
+	/* sparc32 uses per-device dma_ops */
+	return IS_ENABLED(CONFIG_SPARC64) ? dma_ops : NULL;
 }
 
 #endif
diff --git a/arch/sparc/include/asm/page_32.h b/arch/sparc/include/asm/page_32.h
index b76d59e..4782600 100644
--- a/arch/sparc/include/asm/page_32.h
+++ b/arch/sparc/include/asm/page_32.h
@@ -133,9 +133,6 @@ extern unsigned long pfn_base;
 #define pfn_valid(pfn)		(((pfn) >= (pfn_base)) && (((pfn)-(pfn_base)) < max_mapnr))
 #define virt_addr_valid(kaddr)	((((unsigned long)(kaddr)-PAGE_OFFSET)>>PAGE_SHIFT) < max_mapnr)
 
-#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
-				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
 #include <asm-generic/memory_model.h>
 #include <asm-generic/getorder.h>
 
diff --git a/arch/sparc/include/asm/page_64.h b/arch/sparc/include/asm/page_64.h
index e80f2d5..254dffd 100644
--- a/arch/sparc/include/asm/page_64.h
+++ b/arch/sparc/include/asm/page_64.h
@@ -158,9 +158,6 @@ extern unsigned long PAGE_OFFSET;
 
 #endif /* !(__ASSEMBLY__) */
 
-#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
-				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
 #include <asm-generic/getorder.h>
 
 #endif /* _SPARC64_PAGE_H */
diff --git a/arch/sparc/include/asm/pgtable_32.h b/arch/sparc/include/asm/pgtable_32.h
index 6d6f44c..0de659ae 100644
--- a/arch/sparc/include/asm/pgtable_32.h
+++ b/arch/sparc/include/asm/pgtable_32.h
@@ -223,11 +223,6 @@ static inline int pte_young(pte_t pte)
 	return pte_val(pte) & SRMMU_REF;
 }
 
-static inline int pte_special(pte_t pte)
-{
-	return 0;
-}
-
 static inline pte_t pte_wrprotect(pte_t pte)
 {
 	return __pte(pte_val(pte) & ~SRMMU_WRITE);
@@ -258,8 +253,6 @@ static inline pte_t pte_mkyoung(pte_t pte)
 	return __pte(pte_val(pte) | SRMMU_REF);
 }
 
-#define pte_mkspecial(pte)    (pte)
-
 #define pfn_pte(pfn, prot)		mk_pte(pfn_to_page(pfn), prot)
 
 static inline unsigned long pte_pfn(pte_t pte)
diff --git a/arch/sparc/include/asm/pgtable_64.h b/arch/sparc/include/asm/pgtable_64.h
index 65494c3..da527b2 100644
--- a/arch/sparc/include/asm/pgtable_64.h
+++ b/arch/sparc/include/asm/pgtable_64.h
@@ -907,11 +907,11 @@ static inline unsigned long pud_pfn(pud_t pud)
 	 (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1)))
 
 /* Find an entry in the third-level page table.. */
-#define pte_index(dir, address)	\
-	((pte_t *) __pmd_page(*(dir)) + \
-	 ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)))
-#define pte_offset_kernel		pte_index
-#define pte_offset_map			pte_index
+#define pte_index(address)			\
+	 ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset_kernel(dir, address)	\
+	((pte_t *) __pmd_page(*(dir)) + pte_index(address))
+#define pte_offset_map(dir, address)	pte_offset_kernel((dir), (address))
 #define pte_unmap(pte)			do { } while (0)
 
 /* We cannot include <linux/mm_types.h> at this point yet: */
diff --git a/arch/sparc/kernel/.gitignore b/arch/sparc/kernel/.gitignore
index c5f676c..bbb90f9 100644
--- a/arch/sparc/kernel/.gitignore
+++ b/arch/sparc/kernel/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 vmlinux.lds
diff --git a/arch/sparc/kernel/ioport.c b/arch/sparc/kernel/ioport.c
index e59461d..d6874c9 100644
--- a/arch/sparc/kernel/ioport.c
+++ b/arch/sparc/kernel/ioport.c
@@ -373,9 +373,6 @@ void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size,
 		dma_make_coherent(paddr, PAGE_ALIGN(size));
 }
 
-const struct dma_map_ops *dma_ops;
-EXPORT_SYMBOL(dma_ops);
-
 #ifdef CONFIG_PROC_FS
 
 static int sparc_io_proc_show(struct seq_file *m, void *v)
diff --git a/arch/sparc/kernel/of_device_common.c b/arch/sparc/kernel/of_device_common.c
index b32cc56..e717a56 100644
--- a/arch/sparc/kernel/of_device_common.c
+++ b/arch/sparc/kernel/of_device_common.c
@@ -67,6 +67,7 @@ void of_propagate_archdata(struct platform_device *bus)
 		op->dev.archdata.stc = bus_sd->stc;
 		op->dev.archdata.host_controller = bus_sd->host_controller;
 		op->dev.archdata.numa_node = bus_sd->numa_node;
+		op->dev.dma_ops = bus->dev.dma_ops;
 
 		if (dp->child)
 			of_propagate_archdata(op);
diff --git a/arch/sparc/kernel/syscalls/syscallhdr.sh b/arch/sparc/kernel/syscalls/syscallhdr.sh
index 626b574..cf50a75 100644
--- a/arch/sparc/kernel/syscalls/syscallhdr.sh
+++ b/arch/sparc/kernel/syscalls/syscallhdr.sh
@@ -32,5 +32,5 @@
 	printf "#define __NR_syscalls\t%s\n" "${nxt}"
 	printf "#endif\n"
 	printf "\n"
-	printf "#endif /* %s */" "${fileguard}"
+	printf "#endif /* %s */\n" "${fileguard}"
 ) > "$out"
diff --git a/arch/sparc/mm/io-unit.c b/arch/sparc/mm/io-unit.c
index 33a0fac..289276b 100644
--- a/arch/sparc/mm/io-unit.c
+++ b/arch/sparc/mm/io-unit.c
@@ -38,6 +38,8 @@
 #define IOPERM        (IOUPTE_CACHE | IOUPTE_WRITE | IOUPTE_VALID)
 #define MKIOPTE(phys) __iopte((((phys)>>4) & IOUPTE_PAGE) | IOPERM)
 
+static const struct dma_map_ops iounit_dma_ops;
+
 static void __init iounit_iommu_init(struct platform_device *op)
 {
 	struct iounit_struct *iounit;
@@ -70,6 +72,8 @@ static void __init iounit_iommu_init(struct platform_device *op)
 	xptend = iounit->page_table + (16 * PAGE_SIZE) / sizeof(iopte_t);
 	for (; xpt < xptend; xpt++)
 		sbus_writel(0, xpt);
+
+	op->dev.dma_ops = &iounit_dma_ops;
 }
 
 static int __init iounit_init(void)
@@ -288,8 +292,3 @@ static const struct dma_map_ops iounit_dma_ops = {
 	.map_sg			= iounit_map_sg,
 	.unmap_sg		= iounit_unmap_sg,
 };
-
-void __init ld_mmu_iounit(void)
-{
-	dma_ops = &iounit_dma_ops;
-}
diff --git a/arch/sparc/mm/iommu.c b/arch/sparc/mm/iommu.c
index 4d3c699..b00dde1 100644
--- a/arch/sparc/mm/iommu.c
+++ b/arch/sparc/mm/iommu.c
@@ -54,6 +54,9 @@ static pgprot_t dvma_prot;		/* Consistent mapping pte flags */
 #define IOPERM        (IOPTE_CACHE | IOPTE_WRITE | IOPTE_VALID)
 #define MKIOPTE(pfn, perm) (((((pfn)<<8) & IOPTE_PAGE) | (perm)) & ~IOPTE_WAZ)
 
+static const struct dma_map_ops sbus_iommu_dma_gflush_ops;
+static const struct dma_map_ops sbus_iommu_dma_pflush_ops;
+
 static void __init sbus_iommu_init(struct platform_device *op)
 {
 	struct iommu_struct *iommu;
@@ -129,6 +132,11 @@ static void __init sbus_iommu_init(struct platform_device *op)
 	       (int)(IOMMU_NPTES*sizeof(iopte_t)), (int)IOMMU_NPTES);
 
 	op->dev.archdata.iommu = iommu;
+
+	if (flush_page_for_dma_global)
+		op->dev.dma_ops = &sbus_iommu_dma_gflush_ops;
+	 else
+		op->dev.dma_ops = &sbus_iommu_dma_pflush_ops;
 }
 
 static int __init iommu_init(void)
@@ -445,13 +453,6 @@ static const struct dma_map_ops sbus_iommu_dma_pflush_ops = {
 
 void __init ld_mmu_iommu(void)
 {
-	if (flush_page_for_dma_global) {
-		/* flush_page_for_dma flushes everything, no matter of what page is it */
-		dma_ops = &sbus_iommu_dma_gflush_ops;
-	} else {
-		dma_ops = &sbus_iommu_dma_pflush_ops;
-	}
-
 	if (viking_mxcc_present || srmmu_modtype == HyperSparc) {
 		dvma_prot = __pgprot(SRMMU_CACHE | SRMMU_ET_PTE | SRMMU_PRIV);
 		ioperm_noc = IOPTE_CACHE | IOPTE_WRITE | IOPTE_VALID;
diff --git a/arch/sparc/mm/mm_32.h b/arch/sparc/mm/mm_32.h
index 0d0b06e..ce750a9 100644
--- a/arch/sparc/mm/mm_32.h
+++ b/arch/sparc/mm/mm_32.h
@@ -20,6 +20,3 @@ void __init srmmu_paging_init(void);
 
 /* iommu.c */
 void ld_mmu_iommu(void);
-
-/* io-unit.c */
-void ld_mmu_iounit(void);
diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c
index f56c3c9..b7c94de 100644
--- a/arch/sparc/mm/srmmu.c
+++ b/arch/sparc/mm/srmmu.c
@@ -1865,9 +1865,7 @@ void __init load_mmu(void)
 		&smp_cachetlb_ops;
 #endif
 
-	if (sparc_cpu_model == sun4d)
-		ld_mmu_iounit();
-	else
+	if (sparc_cpu_model != sun4d)
 		ld_mmu_iommu();
 #ifdef CONFIG_SMP
 	if (sparc_cpu_model == sun4d)
diff --git a/arch/sparc/vdso/.gitignore b/arch/sparc/vdso/.gitignore
index ef925b9..8d4ebc9 100644
--- a/arch/sparc/vdso/.gitignore
+++ b/arch/sparc/vdso/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 vdso.lds
 vdso-image-*.c
 vdso2c
diff --git a/arch/sparc/vdso/vdso32/.gitignore b/arch/sparc/vdso/vdso32/.gitignore
index e45fba9..5167384 100644
--- a/arch/sparc/vdso/vdso32/.gitignore
+++ b/arch/sparc/vdso/vdso32/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 vdso32.lds
diff --git a/arch/sparc/vdso/vdso32/vclock_gettime.c b/arch/sparc/vdso/vdso32/vclock_gettime.c
index 026abb3..d7f99e6 100644
--- a/arch/sparc/vdso/vdso32/vclock_gettime.c
+++ b/arch/sparc/vdso/vdso32/vclock_gettime.c
@@ -4,10 +4,6 @@
 
 #define	BUILD_VDSO32
 
-#ifndef	CONFIG_CC_OPTIMIZE_FOR_SIZE
-#undef	CONFIG_OPTIMIZE_INLINING
-#endif
-
 #ifdef	CONFIG_SPARC64
 
 /*
diff --git a/arch/um/.gitignore b/arch/um/.gitignore
index a73d3a1..6323e55 100644
--- a/arch/um/.gitignore
+++ b/arch/um/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 kernel/config.c
 kernel/config.tmp
 kernel/vmlinux.lds
diff --git a/arch/um/Kconfig b/arch/um/Kconfig
index 0917f84..96ab702 100644
--- a/arch/um/Kconfig
+++ b/arch/um/Kconfig
@@ -62,9 +62,12 @@
 
 source "arch/$(HEADER_ARCH)/um/Kconfig"
 
+config FORBID_STATIC_LINK
+	bool
+
 config STATIC_LINK
 	bool "Force a static link"
-	default n
+	depends on !FORBID_STATIC_LINK
 	help
 	  This option gives you the ability to force a static link of UML.
 	  Normally, UML is linked as a shared binary.  This is inconvenient for
@@ -73,6 +76,9 @@
 	  Additionally, this option enables using higher memory spaces (up to
 	  2.75G) for UML.
 
+	  NOTE: This option is incompatible with some networking features which
+	  depend on features that require being dynamically loaded (like NSS).
+
 config LD_SCRIPT_STATIC
 	bool
 	default y
@@ -191,6 +197,7 @@
 	prompt "Support time-travel mode (e.g. for test execution)"
 	# inf-cpu mode is incompatible with the benchmarking
 	depends on !RAID6_PQ_BENCHMARK
+	depends on !SMP
 	help
 	  Enable this option to support time travel inside the UML instance.
 
diff --git a/arch/um/configs/i386_defconfig b/arch/um/configs/i386_defconfig
index 73e98bb..fb51bd2 100644
--- a/arch/um/configs/i386_defconfig
+++ b/arch/um/configs/i386_defconfig
@@ -26,7 +26,7 @@
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
-CONFIG_IOSCHED_CFQ=m
+CONFIG_IOSCHED_BFQ=m
 CONFIG_SSL=y
 CONFIG_NULL_CHAN=y
 CONFIG_PORT_CHAN=y
diff --git a/arch/um/configs/x86_64_defconfig b/arch/um/configs/x86_64_defconfig
index 3281d76..477b873 100644
--- a/arch/um/configs/x86_64_defconfig
+++ b/arch/um/configs/x86_64_defconfig
@@ -24,7 +24,7 @@
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
-CONFIG_IOSCHED_CFQ=m
+CONFIG_IOSCHED_BFQ=m
 CONFIG_SSL=y
 CONFIG_NULL_CHAN=y
 CONFIG_PORT_CHAN=y
diff --git a/arch/um/drivers/Kconfig b/arch/um/drivers/Kconfig
index 72d41705..9160ead 100644
--- a/arch/um/drivers/Kconfig
+++ b/arch/um/drivers/Kconfig
@@ -234,6 +234,7 @@
 config UML_NET_VECTOR
 	bool "Vector I/O high performance network devices"
 	depends on UML_NET
+	select FORBID_STATIC_LINK
 	help
 	This User-Mode Linux network driver uses multi-message send
 	and receive functions. The host running the UML guest must have
@@ -245,6 +246,7 @@
 config UML_NET_VDE
 	bool "VDE transport (obsolete)"
 	depends on UML_NET
+	select FORBID_STATIC_LINK
 	help
 	This User-Mode Linux network transport allows one or more running
 	UMLs on a single host to communicate with each other and also
@@ -292,6 +294,7 @@
 config UML_NET_PCAP
 	bool "pcap transport (obsolete)"
 	depends on UML_NET
+	select FORBID_STATIC_LINK
 	help
 	The pcap transport makes a pcap packet stream on the host look
 	like an ethernet device inside UML.  This is useful for making
diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c
index 35ebeeb..1802cf4 100644
--- a/arch/um/drivers/net_kern.c
+++ b/arch/um/drivers/net_kern.c
@@ -266,7 +266,6 @@ static void uml_net_get_drvinfo(struct net_device *dev,
 				struct ethtool_drvinfo *info)
 {
 	strlcpy(info->driver, DRIVER_NAME, sizeof(info->driver));
-	strlcpy(info->version, "42", sizeof(info->version));
 }
 
 static const struct ethtool_ops uml_net_ethtool_ops = {
@@ -275,17 +274,6 @@ static const struct ethtool_ops uml_net_ethtool_ops = {
 	.get_ts_info	= ethtool_op_get_ts_info,
 };
 
-static void uml_net_user_timer_expire(struct timer_list *t)
-{
-#ifdef undef
-	struct uml_net_private *lp = from_timer(lp, t, tl);
-	struct connection *conn = &lp->user;
-
-	dprintk(KERN_INFO "uml_net_user_timer_expire [%p]\n", conn);
-	do_connect(conn);
-#endif
-}
-
 void uml_net_setup_etheraddr(struct net_device *dev, char *str)
 {
 	unsigned char *addr = dev->dev_addr;
@@ -456,7 +444,6 @@ static void eth_configure(int n, void *init, char *mac,
 		  .add_address 		= transport->user->add_address,
 		  .delete_address  	= transport->user->delete_address });
 
-	timer_setup(&lp->tl, uml_net_user_timer_expire, 0);
 	spin_lock_init(&lp->lock);
 	memcpy(lp->mac, dev->dev_addr, sizeof(lp->mac));
 
diff --git a/arch/um/drivers/random.c b/arch/um/drivers/random.c
index 1d5d3057..ce115fc 100644
--- a/arch/um/drivers/random.c
+++ b/arch/um/drivers/random.c
@@ -23,8 +23,6 @@
 #define RNG_VERSION "1.0.0"
 #define RNG_MODULE_NAME "hw_random"
 
-#define RNG_MISCDEV_MINOR		183 /* official */
-
 /* Changed at init time, in the non-modular case, and at module load
  * time, in the module case.  Presumably, the module subsystem
  * protects against a module being loaded twice at the same time.
@@ -104,7 +102,7 @@ static const struct file_operations rng_chrdev_ops = {
 
 /* rng_init shouldn't be called more than once at boot time */
 static struct miscdevice rng_miscdev = {
-	RNG_MISCDEV_MINOR,
+	HWRNG_MINOR,
 	RNG_MODULE_NAME,
 	&rng_chrdev_ops,
 };
diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c
index 247f95d..eae8c83 100644
--- a/arch/um/drivers/ubd_kern.c
+++ b/arch/um/drivers/ubd_kern.c
@@ -1592,11 +1592,11 @@ int io_thread(void *arg)
 			&io_remainder_size,
 			UBD_REQ_BUFFER_SIZE
 		);
-		if (n < 0) {
-			if (n == -EAGAIN) {
+		if (n <= 0) {
+			if (n == -EAGAIN)
 				ubd_read_poll(-1);
-				continue;
-			}
+
+			continue;
 		}
 
 		for (count = 0; count < n/sizeof(struct io_thread_req *); count++) {
@@ -1607,7 +1607,9 @@ int io_thread(void *arg)
 		written = 0;
 
 		do {
-			res = os_write_file(kernel_fd, ((char *) io_req_buffer) + written, n);
+			res = os_write_file(kernel_fd,
+					    ((char *) io_req_buffer) + written,
+					    n - written);
 			if (res >= 0) {
 				written += res;
 			}
diff --git a/arch/um/drivers/vector_kern.c b/arch/um/drivers/vector_kern.c
index e98304d..8735c46 100644
--- a/arch/um/drivers/vector_kern.c
+++ b/arch/um/drivers/vector_kern.c
@@ -46,7 +46,6 @@
 
 
 #define DRIVER_NAME "uml-vector"
-#define DRIVER_VERSION "01"
 struct vector_cmd_line_arg {
 	struct list_head list;
 	int unit;
@@ -198,6 +197,9 @@ static int get_transport_options(struct arglist *def)
 	long parsed;
 	int result = 0;
 
+	if (transport == NULL)
+		return -EINVAL;
+
 	if (vector != NULL) {
 		if (kstrtoul(vector, 10, &parsed) == 0) {
 			if (parsed == 0) {
@@ -1378,7 +1380,6 @@ static void vector_net_get_drvinfo(struct net_device *dev,
 				struct ethtool_drvinfo *info)
 {
 	strlcpy(info->driver, DRIVER_NAME, sizeof(info->driver));
-	strlcpy(info->version, DRIVER_VERSION, sizeof(info->version));
 }
 
 static int vector_net_load_bpf_flash(struct net_device *dev,
diff --git a/arch/um/drivers/vector_user.c b/arch/um/drivers/vector_user.c
index ddcd917..aa28e9e 100644
--- a/arch/um/drivers/vector_user.c
+++ b/arch/um/drivers/vector_user.c
@@ -221,8 +221,7 @@ static struct vector_fds *user_init_tap_fds(struct arglist *ifspec)
 	return result;
 tap_cleanup:
 	printk(UM_KERN_ERR "user_init_tap: init failed, error %d", fd);
-	if (result != NULL)
-		kfree(result);
+	kfree(result);
 	return NULL;
 }
 
@@ -266,8 +265,7 @@ static struct vector_fds *user_init_hybrid_fds(struct arglist *ifspec)
 	return result;
 hybrid_cleanup:
 	printk(UM_KERN_ERR "user_init_hybrid: init failed");
-	if (result != NULL)
-		kfree(result);
+	kfree(result);
 	return NULL;
 }
 
@@ -344,10 +342,8 @@ static struct vector_fds *user_init_unix_fds(struct arglist *ifspec, int id)
 unix_cleanup:
 	if (fd >= 0)
 		os_close_file(fd);
-	if (remote_addr != NULL)
-		kfree(remote_addr);
-	if (result != NULL)
-		kfree(result);
+	kfree(remote_addr);
+	kfree(result);
 	return NULL;
 }
 
@@ -382,8 +378,7 @@ static struct vector_fds *user_init_raw_fds(struct arglist *ifspec)
 	return result;
 raw_cleanup:
 	printk(UM_KERN_ERR "user_init_raw: init failed, error %d", err);
-	if (result != NULL)
-		kfree(result);
+	kfree(result);
 	return NULL;
 }
 
diff --git a/arch/um/drivers/vhost_user.h b/arch/um/drivers/vhost_user.h
index 45ff5ea..6c71b60 100644
--- a/arch/um/drivers/vhost_user.h
+++ b/arch/um/drivers/vhost_user.h
@@ -10,9 +10,10 @@
 /* Feature bits */
 #define VHOST_USER_F_PROTOCOL_FEATURES	30
 /* Protocol feature bits */
-#define VHOST_USER_PROTOCOL_F_REPLY_ACK		3
-#define VHOST_USER_PROTOCOL_F_SLAVE_REQ		5
-#define VHOST_USER_PROTOCOL_F_CONFIG		9
+#define VHOST_USER_PROTOCOL_F_REPLY_ACK			3
+#define VHOST_USER_PROTOCOL_F_SLAVE_REQ			5
+#define VHOST_USER_PROTOCOL_F_CONFIG			9
+#define VHOST_USER_PROTOCOL_F_INBAND_NOTIFICATIONS	14
 /* Vring state index masks */
 #define VHOST_USER_VRING_INDEX_MASK	0xff
 #define VHOST_USER_VRING_POLL_MASK	BIT(8)
@@ -24,7 +25,8 @@
 /* Supported protocol features */
 #define VHOST_USER_SUPPORTED_PROTOCOL_F	(BIT_ULL(VHOST_USER_PROTOCOL_F_REPLY_ACK) | \
 					 BIT_ULL(VHOST_USER_PROTOCOL_F_SLAVE_REQ) | \
-					 BIT_ULL(VHOST_USER_PROTOCOL_F_CONFIG))
+					 BIT_ULL(VHOST_USER_PROTOCOL_F_CONFIG) | \
+					 BIT_ULL(VHOST_USER_PROTOCOL_F_INBAND_NOTIFICATIONS))
 
 enum vhost_user_request {
 	VHOST_USER_GET_FEATURES = 1,
@@ -52,12 +54,14 @@ enum vhost_user_request {
 	VHOST_USER_SET_VRING_ENDIAN = 23,
 	VHOST_USER_GET_CONFIG = 24,
 	VHOST_USER_SET_CONFIG = 25,
+	VHOST_USER_VRING_KICK = 35,
 };
 
 enum vhost_user_slave_request {
 	VHOST_USER_SLAVE_IOTLB_MSG = 1,
 	VHOST_USER_SLAVE_CONFIG_CHANGE_MSG = 2,
 	VHOST_USER_SLAVE_VRING_HOST_NOTIFIER_MSG = 3,
+	VHOST_USER_SLAVE_VRING_CALL = 4,
 };
 
 struct vhost_user_header {
diff --git a/arch/um/drivers/virtio_uml.c b/arch/um/drivers/virtio_uml.c
index 023ced2..be54d36 100644
--- a/arch/um/drivers/virtio_uml.c
+++ b/arch/um/drivers/virtio_uml.c
@@ -26,6 +26,7 @@
 #include <linux/virtio.h>
 #include <linux/virtio_config.h>
 #include <linux/virtio_ring.h>
+#include <linux/time-internal.h>
 #include <shared/as-layout.h>
 #include <irq_kern.h>
 #include <init.h>
@@ -53,6 +54,7 @@ struct virtio_uml_device {
 	struct virtio_device vdev;
 	struct platform_device *pdev;
 
+	spinlock_t sock_lock;
 	int sock, req_fd;
 	u64 features;
 	u64 protocol_features;
@@ -63,6 +65,11 @@ struct virtio_uml_device {
 struct virtio_uml_vq_info {
 	int kick_fd, call_fd;
 	char name[32];
+#ifdef CONFIG_UML_TIME_TRAVEL_SUPPORT
+	struct virtqueue *vq;
+	vq_callback_t *callback;
+	struct time_travel_event defer;
+#endif
 };
 
 extern unsigned long long physmem_size, highmem;
@@ -117,10 +124,27 @@ static int vhost_user_recv_header(int fd, struct vhost_user_msg *msg)
 
 static int vhost_user_recv(struct virtio_uml_device *vu_dev,
 			   int fd, struct vhost_user_msg *msg,
-			   size_t max_payload_size)
+			   size_t max_payload_size, bool wait)
 {
 	size_t size;
-	int rc = vhost_user_recv_header(fd, msg);
+	int rc;
+
+	/*
+	 * In virtio time-travel mode, we're handling all the vhost-user
+	 * FDs by polling them whenever appropriate. However, we may get
+	 * into a situation where we're sending out an interrupt message
+	 * to a device (e.g. a net device) and need to handle a simulation
+	 * time message while doing so, e.g. one that tells us to update
+	 * our idea of how long we can run without scheduling.
+	 *
+	 * Thus, we need to not just read() from the given fd, but need
+	 * to also handle messages for the simulation time - this function
+	 * does that for us while waiting for the given fd to be readable.
+	 */
+	if (wait)
+		time_travel_wait_readable(fd);
+
+	rc = vhost_user_recv_header(fd, msg);
 
 	if (rc == -ECONNRESET && vu_dev->registered) {
 		struct virtio_uml_platform_data *pdata;
@@ -142,7 +166,8 @@ static int vhost_user_recv_resp(struct virtio_uml_device *vu_dev,
 				struct vhost_user_msg *msg,
 				size_t max_payload_size)
 {
-	int rc = vhost_user_recv(vu_dev, vu_dev->sock, msg, max_payload_size);
+	int rc = vhost_user_recv(vu_dev, vu_dev->sock, msg,
+				 max_payload_size, true);
 
 	if (rc)
 		return rc;
@@ -172,7 +197,8 @@ static int vhost_user_recv_req(struct virtio_uml_device *vu_dev,
 			       struct vhost_user_msg *msg,
 			       size_t max_payload_size)
 {
-	int rc = vhost_user_recv(vu_dev, vu_dev->req_fd, msg, max_payload_size);
+	int rc = vhost_user_recv(vu_dev, vu_dev->req_fd, msg,
+				 max_payload_size, false);
 
 	if (rc)
 		return rc;
@@ -189,6 +215,7 @@ static int vhost_user_send(struct virtio_uml_device *vu_dev,
 			   int *fds, size_t num_fds)
 {
 	size_t size = sizeof(msg->header) + msg->header.size;
+	unsigned long flags;
 	bool request_ack;
 	int rc;
 
@@ -207,24 +234,28 @@ static int vhost_user_send(struct virtio_uml_device *vu_dev,
 	if (request_ack)
 		msg->header.flags |= VHOST_USER_FLAG_NEED_REPLY;
 
+	spin_lock_irqsave(&vu_dev->sock_lock, flags);
 	rc = full_sendmsg_fds(vu_dev->sock, msg, size, fds, num_fds);
 	if (rc < 0)
-		return rc;
+		goto out;
 
 	if (request_ack) {
 		uint64_t status;
 
 		rc = vhost_user_recv_u64(vu_dev, &status);
 		if (rc)
-			return rc;
+			goto out;
 
 		if (status) {
 			vu_err(vu_dev, "slave reports error: %llu\n", status);
-			return -EIO;
+			rc = -EIO;
+			goto out;
 		}
 	}
 
-	return 0;
+out:
+	spin_unlock_irqrestore(&vu_dev->sock_lock, flags);
+	return rc;
 }
 
 static int vhost_user_send_no_payload(struct virtio_uml_device *vu_dev,
@@ -324,6 +355,7 @@ static void vhost_user_reply(struct virtio_uml_device *vu_dev,
 static irqreturn_t vu_req_interrupt(int irq, void *data)
 {
 	struct virtio_uml_device *vu_dev = data;
+	struct virtqueue *vq;
 	int response = 1;
 	struct {
 		struct vhost_user_msg msg;
@@ -343,6 +375,15 @@ static irqreturn_t vu_req_interrupt(int irq, void *data)
 		virtio_config_changed(&vu_dev->vdev);
 		response = 0;
 		break;
+	case VHOST_USER_SLAVE_VRING_CALL:
+		virtio_device_for_each_vq((&vu_dev->vdev), vq) {
+			if (vq->index == msg.msg.payload.vring_state.index) {
+				response = 0;
+				vring_interrupt(0 /* ignored */, vq);
+				break;
+			}
+		}
+		break;
 	case VHOST_USER_SLAVE_IOTLB_MSG:
 		/* not supported - VIRTIO_F_IOMMU_PLATFORM */
 	case VHOST_USER_SLAVE_VRING_HOST_NOTIFIER_MSG:
@@ -684,6 +725,17 @@ static bool vu_notify(struct virtqueue *vq)
 	const uint64_t n = 1;
 	int rc;
 
+	time_travel_propagate_time();
+
+	if (info->kick_fd < 0) {
+		struct virtio_uml_device *vu_dev;
+
+		vu_dev = to_virtio_uml_device(vq->vdev);
+
+		return vhost_user_set_vring_state(vu_dev, VHOST_USER_VRING_KICK,
+						  vq->index, 0) == 0;
+	}
+
 	do {
 		rc = os_write_file(info->kick_fd, &n, sizeof(n));
 	} while (rc == -EINTR);
@@ -749,10 +801,13 @@ static void vu_del_vq(struct virtqueue *vq)
 {
 	struct virtio_uml_vq_info *info = vq->priv;
 
-	um_free_irq(VIRTIO_IRQ, vq);
+	if (info->call_fd >= 0) {
+		um_free_irq(VIRTIO_IRQ, vq);
+		os_close_file(info->call_fd);
+	}
 
-	os_close_file(info->call_fd);
-	os_close_file(info->kick_fd);
+	if (info->kick_fd >= 0)
+		os_close_file(info->kick_fd);
 
 	vring_del_virtqueue(vq);
 	kfree(info);
@@ -782,6 +837,15 @@ static int vu_setup_vq_call_fd(struct virtio_uml_device *vu_dev,
 	int call_fds[2];
 	int rc;
 
+	/* no call FD needed/desired in this case */
+	if (vu_dev->protocol_features &
+			BIT_ULL(VHOST_USER_PROTOCOL_F_INBAND_NOTIFICATIONS) &&
+	    vu_dev->protocol_features &
+			BIT_ULL(VHOST_USER_PROTOCOL_F_SLAVE_REQ)) {
+		info->call_fd = -1;
+		return 0;
+	}
+
 	/* Use a pipe for call fd, since SIGIO is not supported for eventfd */
 	rc = os_pipe(call_fds, true, true);
 	if (rc < 0)
@@ -810,6 +874,23 @@ static int vu_setup_vq_call_fd(struct virtio_uml_device *vu_dev,
 	return rc;
 }
 
+#ifdef CONFIG_UML_TIME_TRAVEL_SUPPORT
+static void vu_defer_irq_handle(struct time_travel_event *d)
+{
+	struct virtio_uml_vq_info *info;
+
+	info = container_of(d, struct virtio_uml_vq_info, defer);
+	info->callback(info->vq);
+}
+
+static void vu_defer_irq_callback(struct virtqueue *vq)
+{
+	struct virtio_uml_vq_info *info = vq->priv;
+
+	time_travel_add_irq_event(&info->defer);
+}
+#endif
+
 static struct virtqueue *vu_setup_vq(struct virtio_device *vdev,
 				     unsigned index, vq_callback_t *callback,
 				     const char *name, bool ctx)
@@ -829,6 +910,19 @@ static struct virtqueue *vu_setup_vq(struct virtio_device *vdev,
 	snprintf(info->name, sizeof(info->name), "%s.%d-%s", pdev->name,
 		 pdev->id, name);
 
+#ifdef CONFIG_UML_TIME_TRAVEL_SUPPORT
+	/*
+	 * When we get an interrupt, we must bounce it through the simulation
+	 * calendar (the simtime device), except for the simtime device itself
+	 * since that's part of the simulation control.
+	 */
+	if (time_travel_mode == TT_MODE_EXTERNAL && callback) {
+		info->callback = callback;
+		callback = vu_defer_irq_callback;
+		time_travel_set_event_fn(&info->defer, vu_defer_irq_handle);
+	}
+#endif
+
 	vq = vring_create_virtqueue(index, num, PAGE_SIZE, vdev, true, true,
 				    ctx, vu_notify, callback, info->name);
 	if (!vq) {
@@ -837,11 +931,19 @@ static struct virtqueue *vu_setup_vq(struct virtio_device *vdev,
 	}
 	vq->priv = info;
 	num = virtqueue_get_vring_size(vq);
+#ifdef CONFIG_UML_TIME_TRAVEL_SUPPORT
+	info->vq = vq;
+#endif
 
-	rc = os_eventfd(0, 0);
-	if (rc < 0)
-		goto error_kick;
-	info->kick_fd = rc;
+	if (vu_dev->protocol_features &
+			BIT_ULL(VHOST_USER_PROTOCOL_F_INBAND_NOTIFICATIONS)) {
+		info->kick_fd = -1;
+	} else {
+		rc = os_eventfd(0, 0);
+		if (rc < 0)
+			goto error_kick;
+		info->kick_fd = rc;
+	}
 
 	rc = vu_setup_vq_call_fd(vu_dev, vq);
 	if (rc)
@@ -866,10 +968,13 @@ static struct virtqueue *vu_setup_vq(struct virtio_device *vdev,
 	return vq;
 
 error_setup:
-	um_free_irq(VIRTIO_IRQ, vq);
-	os_close_file(info->call_fd);
+	if (info->call_fd >= 0) {
+		um_free_irq(VIRTIO_IRQ, vq);
+		os_close_file(info->call_fd);
+	}
 error_call:
-	os_close_file(info->kick_fd);
+	if (info->kick_fd >= 0)
+		os_close_file(info->kick_fd);
 error_kick:
 	vring_del_virtqueue(vq);
 error_create:
@@ -908,10 +1013,12 @@ static int vu_find_vqs(struct virtio_device *vdev, unsigned nvqs,
 	list_for_each_entry(vq, &vdev->vqs, list) {
 		struct virtio_uml_vq_info *info = vq->priv;
 
-		rc = vhost_user_set_vring_kick(vu_dev, vq->index,
-					       info->kick_fd);
-		if (rc)
-			goto error_setup;
+		if (info->kick_fd >= 0) {
+			rc = vhost_user_set_vring_kick(vu_dev, vq->index,
+						       info->kick_fd);
+			if (rc)
+				goto error_setup;
+		}
 
 		rc = vhost_user_set_vring_enable(vu_dev, vq->index, true);
 		if (rc)
@@ -1008,6 +1115,8 @@ static int virtio_uml_probe(struct platform_device *pdev)
 		return rc;
 	vu_dev->sock = rc;
 
+	spin_lock_init(&vu_dev->sock_lock);
+
 	rc = vhost_user_init(vu_dev);
 	if (rc)
 		goto error_init;
diff --git a/arch/um/include/asm/Kbuild b/arch/um/include/asm/Kbuild
index db7d9d4..8d435f8 100644
--- a/arch/um/include/asm/Kbuild
+++ b/arch/um/include/asm/Kbuild
@@ -3,7 +3,6 @@
 generic-y += bug.h
 generic-y += compat.h
 generic-y += current.h
-generic-y += delay.h
 generic-y += device.h
 generic-y += emergency-restart.h
 generic-y += exec.h
diff --git a/arch/um/include/asm/delay.h b/arch/um/include/asm/delay.h
new file mode 100644
index 0000000..56fc2b8
--- /dev/null
+++ b/arch/um/include/asm/delay.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __UM_DELAY_H
+#define __UM_DELAY_H
+#include <asm-generic/delay.h>
+#include <linux/time-internal.h>
+
+static inline void um_ndelay(unsigned long nsecs)
+{
+	if (time_travel_mode == TT_MODE_INFCPU ||
+	    time_travel_mode == TT_MODE_EXTERNAL) {
+		time_travel_ndelay(nsecs);
+		return;
+	}
+	ndelay(nsecs);
+}
+#undef ndelay
+#define ndelay um_ndelay
+
+static inline void um_udelay(unsigned long usecs)
+{
+	if (time_travel_mode == TT_MODE_INFCPU ||
+	    time_travel_mode == TT_MODE_EXTERNAL) {
+		time_travel_ndelay(1000 * usecs);
+		return;
+	}
+	udelay(usecs);
+}
+#undef udelay
+#define udelay um_udelay
+#endif /* __UM_DELAY_H */
diff --git a/arch/um/include/asm/pgtable.h b/arch/um/include/asm/pgtable.h
index 2daa58d..b5ddf5d 100644
--- a/arch/um/include/asm/pgtable.h
+++ b/arch/um/include/asm/pgtable.h
@@ -167,11 +167,6 @@ static inline int pte_newprot(pte_t pte)
 	return(pte_present(pte) && (pte_get_bits(pte, _PAGE_NEWPROT)));
 }
 
-static inline int pte_special(pte_t pte)
-{
-	return 0;
-}
-
 /*
  * =================================
  * Flags setting section.
@@ -247,11 +242,6 @@ static inline pte_t pte_mknewpage(pte_t pte)
 	return(pte);
 }
 
-static inline pte_t pte_mkspecial(pte_t pte)
-{
-	return(pte);
-}
-
 static inline void set_pte(pte_t *pteptr, pte_t pteval)
 {
 	pte_copy(*pteptr, pteval);
diff --git a/arch/um/include/linux/time-internal.h b/arch/um/include/linux/time-internal.h
new file mode 100644
index 0000000..f3b03d3
--- /dev/null
+++ b/arch/um/include/linux/time-internal.h
@@ -0,0 +1,84 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2012 - 2014 Cisco Systems
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ */
+
+#ifndef __TIMER_INTERNAL_H__
+#define __TIMER_INTERNAL_H__
+#include <linux/list.h>
+
+#define TIMER_MULTIPLIER 256
+#define TIMER_MIN_DELTA  500
+
+enum time_travel_mode {
+	TT_MODE_OFF,
+	TT_MODE_BASIC,
+	TT_MODE_INFCPU,
+	TT_MODE_EXTERNAL,
+};
+
+#ifdef CONFIG_UML_TIME_TRAVEL_SUPPORT
+struct time_travel_event {
+	unsigned long long time;
+	void (*fn)(struct time_travel_event *d);
+	struct list_head list;
+	bool pending, onstack;
+};
+
+extern enum time_travel_mode time_travel_mode;
+
+void time_travel_sleep(unsigned long long duration);
+
+static inline void
+time_travel_set_event_fn(struct time_travel_event *e,
+			 void (*fn)(struct time_travel_event *d))
+{
+	e->fn = fn;
+}
+
+void __time_travel_propagate_time(void);
+
+static inline void time_travel_propagate_time(void)
+{
+	if (time_travel_mode == TT_MODE_EXTERNAL)
+		__time_travel_propagate_time();
+}
+
+void __time_travel_wait_readable(int fd);
+
+static inline void time_travel_wait_readable(int fd)
+{
+	if (time_travel_mode == TT_MODE_EXTERNAL)
+		__time_travel_wait_readable(fd);
+}
+
+void time_travel_add_irq_event(struct time_travel_event *e);
+#else
+struct time_travel_event {
+};
+
+#define time_travel_mode TT_MODE_OFF
+
+static inline void time_travel_sleep(unsigned long long duration)
+{
+}
+
+/* this is a macro so the event/function need not exist */
+#define time_travel_set_event_fn(e, fn) do {} while (0)
+
+static inline void time_travel_propagate_time(void)
+{
+}
+
+static inline void time_travel_wait_readable(int fd)
+{
+}
+#endif /* CONFIG_UML_TIME_TRAVEL_SUPPORT */
+
+/*
+ * Without CONFIG_UML_TIME_TRAVEL_SUPPORT this is a linker error if used,
+ * which is intentional since we really shouldn't link it in that case.
+ */
+void time_travel_ndelay(unsigned long nsec);
+#endif /* __TIMER_INTERNAL_H__ */
diff --git a/arch/um/include/shared/os.h b/arch/um/include/shared/os.h
index 0f30204..f467d28 100644
--- a/arch/um/include/shared/os.h
+++ b/arch/um/include/shared/os.h
@@ -181,6 +181,7 @@ extern int os_falloc_punch(int fd, unsigned long long offset, int count);
 extern int os_eventfd(unsigned int initval, int flags);
 extern int os_sendmsg_fds(int fd, const void *buf, unsigned int len,
 			  const int *fds, unsigned int fds_num);
+int os_poll(unsigned int n, const int *fds);
 
 /* start_up.c */
 extern void os_early_checks(void);
diff --git a/arch/um/include/shared/timer-internal.h b/arch/um/include/shared/timer-internal.h
deleted file mode 100644
index 2d2d13c..0000000
--- a/arch/um/include/shared/timer-internal.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 2012 - 2014 Cisco Systems
- * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- */
-
-#ifndef __TIMER_INTERNAL_H__
-#define __TIMER_INTERNAL_H__
-
-#define TIMER_MULTIPLIER 256
-#define TIMER_MIN_DELTA  500
-
-enum time_travel_mode {
-	TT_MODE_OFF,
-	TT_MODE_BASIC,
-	TT_MODE_INFCPU,
-};
-
-enum time_travel_timer_mode {
-	TT_TMR_DISABLED,
-	TT_TMR_ONESHOT,
-	TT_TMR_PERIODIC,
-};
-
-#ifdef CONFIG_UML_TIME_TRAVEL_SUPPORT
-extern enum time_travel_mode time_travel_mode;
-extern unsigned long long time_travel_time;
-extern enum time_travel_timer_mode time_travel_timer_mode;
-extern unsigned long long time_travel_timer_expiry;
-extern unsigned long long time_travel_timer_interval;
-
-static inline void time_travel_set_time(unsigned long long ns)
-{
-	time_travel_time = ns;
-}
-
-static inline void time_travel_set_timer_mode(enum time_travel_timer_mode mode)
-{
-	time_travel_timer_mode = mode;
-}
-
-static inline void time_travel_set_timer_expiry(unsigned long long expiry)
-{
-	time_travel_timer_expiry = expiry;
-}
-
-static inline void time_travel_set_timer_interval(unsigned long long interval)
-{
-	time_travel_timer_interval = interval;
-}
-#else
-#define time_travel_mode TT_MODE_OFF
-#define time_travel_time 0
-#define time_travel_timer_expiry 0
-#define time_travel_timer_interval 0
-
-static inline void time_travel_set_time(unsigned long long ns)
-{
-}
-
-static inline void time_travel_set_timer_mode(enum time_travel_timer_mode mode)
-{
-}
-
-static inline void time_travel_set_timer_expiry(unsigned long long expiry)
-{
-}
-
-static inline void time_travel_set_timer_interval(unsigned long long interval)
-{
-}
-
-#define time_travel_timer_mode TT_TMR_DISABLED
-#endif
-
-#endif
diff --git a/arch/um/kernel/kmsg_dump.c b/arch/um/kernel/kmsg_dump.c
index 98bdf69..e4abac6c 100644
--- a/arch/um/kernel/kmsg_dump.c
+++ b/arch/um/kernel/kmsg_dump.c
@@ -9,20 +9,19 @@ static void kmsg_dumper_stdout(struct kmsg_dumper *dumper,
 				enum kmsg_dump_reason reason)
 {
 	static char line[1024];
-
+	struct console *con;
 	size_t len = 0;
-	bool con_available = false;
 
 	/* only dump kmsg when no console is available */
 	if (!console_trylock())
 		return;
 
-	if (console_drivers != NULL)
-		con_available = true;
+	for_each_console(con)
+		break;
 
 	console_unlock();
 
-	if (con_available == true)
+	if (con)
 		return;
 
 	printf("kmsg_dump:\n");
diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c
index 56a0941..cbe33af 100644
--- a/arch/um/kernel/process.c
+++ b/arch/um/kernel/process.c
@@ -32,7 +32,7 @@
 #include <kern_util.h>
 #include <os.h>
 #include <skas.h>
-#include <timer-internal.h>
+#include <linux/time-internal.h>
 
 /*
  * This is a per-cpu array.  A processor only modifies its entry and it only
@@ -203,43 +203,6 @@ void initial_thread_cb(void (*proc)(void *), void *arg)
 	kmalloc_ok = save_kmalloc_ok;
 }
 
-static void time_travel_sleep(unsigned long long duration)
-{
-	unsigned long long next = time_travel_time + duration;
-
-	if (time_travel_mode != TT_MODE_INFCPU)
-		os_timer_disable();
-
-	while (time_travel_timer_mode == TT_TMR_PERIODIC &&
-	       time_travel_timer_expiry < time_travel_time)
-		time_travel_set_timer_expiry(time_travel_timer_expiry +
-					     time_travel_timer_interval);
-
-	if (time_travel_timer_mode != TT_TMR_DISABLED &&
-	    time_travel_timer_expiry < next) {
-		if (time_travel_timer_mode == TT_TMR_ONESHOT)
-			time_travel_set_timer_mode(TT_TMR_DISABLED);
-		/*
-		 * In basic mode, time_travel_time will be adjusted in
-		 * the timer IRQ handler so it works even when the signal
-		 * comes from the OS timer, see there.
-		 */
-		if (time_travel_mode != TT_MODE_BASIC)
-			time_travel_set_time(time_travel_timer_expiry);
-
-		deliver_alarm();
-	} else {
-		time_travel_set_time(next);
-	}
-
-	if (time_travel_mode != TT_MODE_INFCPU) {
-		if (time_travel_timer_mode == TT_TMR_PERIODIC)
-			os_timer_set_interval(time_travel_timer_interval);
-		else if (time_travel_timer_mode == TT_TMR_ONESHOT)
-			os_timer_one_shot(time_travel_timer_expiry - next);
-	}
-}
-
 static void um_idle_sleep(void)
 {
 	unsigned long long duration = UM_NSEC_PER_SEC;
diff --git a/arch/um/kernel/skas/syscall.c b/arch/um/kernel/skas/syscall.c
index 40d90dd..0a12d5a0 100644
--- a/arch/um/kernel/skas/syscall.c
+++ b/arch/um/kernel/skas/syscall.c
@@ -10,7 +10,7 @@
 #include <sysdep/ptrace.h>
 #include <sysdep/ptrace_user.h>
 #include <sysdep/syscalls.h>
-#include <shared/timer-internal.h>
+#include <linux/time-internal.h>
 
 void handle_syscall(struct uml_pt_regs *r)
 {
@@ -24,7 +24,8 @@ void handle_syscall(struct uml_pt_regs *r)
 	 * went to sleep, even if said userspace interacts with the kernel in
 	 * various ways.
 	 */
-	if (time_travel_mode == TT_MODE_INFCPU)
+	if (time_travel_mode == TT_MODE_INFCPU ||
+	    time_travel_mode == TT_MODE_EXTERNAL)
 		schedule();
 
 	/* Initialize the syscall number and default return value. */
diff --git a/arch/um/kernel/time.c b/arch/um/kernel/time.c
index 94ea87b..25eaa6a 100644
--- a/arch/um/kernel/time.c
+++ b/arch/um/kernel/time.c
@@ -4,6 +4,7 @@
  * Copyright (C) 2015 Thomas Meyer (thomas@m3y3r.de)
  * Copyright (C) 2012-2014 Cisco Systems
  * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Copyright (C) 2019 Intel Corporation
  */
 
 #include <linux/clockchips.h>
@@ -18,21 +19,484 @@
 #include <asm/param.h>
 #include <kern_util.h>
 #include <os.h>
-#include <timer-internal.h>
+#include <linux/time-internal.h>
+#include <linux/um_timetravel.h>
 #include <shared/init.h>
 
 #ifdef CONFIG_UML_TIME_TRAVEL_SUPPORT
 enum time_travel_mode time_travel_mode;
-unsigned long long time_travel_time;
-enum time_travel_timer_mode time_travel_timer_mode;
-unsigned long long time_travel_timer_expiry;
-unsigned long long time_travel_timer_interval;
+EXPORT_SYMBOL_GPL(time_travel_mode);
 
 static bool time_travel_start_set;
 static unsigned long long time_travel_start;
-#else
+static unsigned long long time_travel_time;
+static LIST_HEAD(time_travel_events);
+static unsigned long long time_travel_timer_interval;
+static unsigned long long time_travel_next_event;
+static struct time_travel_event time_travel_timer_event;
+static int time_travel_ext_fd = -1;
+static unsigned int time_travel_ext_waiting;
+static bool time_travel_ext_prev_request_valid;
+static unsigned long long time_travel_ext_prev_request;
+static bool time_travel_ext_free_until_valid;
+static unsigned long long time_travel_ext_free_until;
+
+static void time_travel_set_time(unsigned long long ns)
+{
+	if (unlikely(ns < time_travel_time))
+		panic("time-travel: time goes backwards %lld -> %lld\n",
+		      time_travel_time, ns);
+	time_travel_time = ns;
+}
+
+enum time_travel_message_handling {
+	TTMH_IDLE,
+	TTMH_POLL,
+	TTMH_READ,
+};
+
+static void time_travel_handle_message(struct um_timetravel_msg *msg,
+				       enum time_travel_message_handling mode)
+{
+	struct um_timetravel_msg resp = {
+		.op = UM_TIMETRAVEL_ACK,
+	};
+	int ret;
+
+	/*
+	 * Poll outside the locked section (if we're not called to only read
+	 * the response) so we can get interrupts for e.g. virtio while we're
+	 * here, but then we need to lock to not get interrupted between the
+	 * read of the message and write of the ACK.
+	 */
+	if (mode != TTMH_READ) {
+		while (os_poll(1, &time_travel_ext_fd) != 0) {
+			if (mode == TTMH_IDLE) {
+				BUG_ON(!irqs_disabled());
+				local_irq_enable();
+				local_irq_disable();
+			}
+		}
+	}
+
+	ret = os_read_file(time_travel_ext_fd, msg, sizeof(*msg));
+
+	if (ret == 0)
+		panic("time-travel external link is broken\n");
+	if (ret != sizeof(*msg))
+		panic("invalid time-travel message - %d bytes\n", ret);
+
+	switch (msg->op) {
+	default:
+		WARN_ONCE(1, "time-travel: unexpected message %lld\n",
+			  (unsigned long long)msg->op);
+		break;
+	case UM_TIMETRAVEL_ACK:
+		return;
+	case UM_TIMETRAVEL_RUN:
+		time_travel_set_time(msg->time);
+		break;
+	case UM_TIMETRAVEL_FREE_UNTIL:
+		time_travel_ext_free_until_valid = true;
+		time_travel_ext_free_until = msg->time;
+		break;
+	}
+
+	os_write_file(time_travel_ext_fd, &resp, sizeof(resp));
+}
+
+static u64 time_travel_ext_req(u32 op, u64 time)
+{
+	static int seq;
+	int mseq = ++seq;
+	struct um_timetravel_msg msg = {
+		.op = op,
+		.time = time,
+		.seq = mseq,
+	};
+	unsigned long flags;
+
+	/*
+	 * We need to save interrupts here and only restore when we
+	 * got the ACK - otherwise we can get interrupted and send
+	 * another request while we're still waiting for an ACK, but
+	 * the peer doesn't know we got interrupted and will send
+	 * the ACKs in the same order as the message, but we'd need
+	 * to see them in the opposite order ...
+	 *
+	 * This wouldn't matter *too* much, but some ACKs carry the
+	 * current time (for UM_TIMETRAVEL_GET) and getting another
+	 * ACK without a time would confuse us a lot!
+	 *
+	 * The sequence number assignment that happens here lets us
+	 * debug such message handling issues more easily.
+	 */
+	local_irq_save(flags);
+	os_write_file(time_travel_ext_fd, &msg, sizeof(msg));
+
+	while (msg.op != UM_TIMETRAVEL_ACK)
+		time_travel_handle_message(&msg, TTMH_READ);
+
+	if (msg.seq != mseq)
+		panic("time-travel: ACK message has different seqno! op=%d, seq=%d != %d time=%lld\n",
+		      msg.op, msg.seq, mseq, msg.time);
+
+	if (op == UM_TIMETRAVEL_GET)
+		time_travel_set_time(msg.time);
+	local_irq_restore(flags);
+
+	return msg.time;
+}
+
+void __time_travel_wait_readable(int fd)
+{
+	int fds[2] = { fd, time_travel_ext_fd };
+	int ret;
+
+	if (time_travel_mode != TT_MODE_EXTERNAL)
+		return;
+
+	while ((ret = os_poll(2, fds))) {
+		struct um_timetravel_msg msg;
+
+		if (ret == 1)
+			time_travel_handle_message(&msg, TTMH_READ);
+	}
+}
+EXPORT_SYMBOL_GPL(__time_travel_wait_readable);
+
+static void time_travel_ext_update_request(unsigned long long time)
+{
+	if (time_travel_mode != TT_MODE_EXTERNAL)
+		return;
+
+	/* asked for exactly this time previously */
+	if (time_travel_ext_prev_request_valid &&
+	    time == time_travel_ext_prev_request)
+		return;
+
+	time_travel_ext_prev_request = time;
+	time_travel_ext_prev_request_valid = true;
+	time_travel_ext_req(UM_TIMETRAVEL_REQUEST, time);
+}
+
+void __time_travel_propagate_time(void)
+{
+	time_travel_ext_req(UM_TIMETRAVEL_UPDATE, time_travel_time);
+}
+EXPORT_SYMBOL_GPL(__time_travel_propagate_time);
+
+/* returns true if we must do a wait to the simtime device */
+static bool time_travel_ext_request(unsigned long long time)
+{
+	/*
+	 * If we received an external sync point ("free until") then we
+	 * don't have to request/wait for anything until then, unless
+	 * we're already waiting.
+	 */
+	if (!time_travel_ext_waiting && time_travel_ext_free_until_valid &&
+	    time < time_travel_ext_free_until)
+		return false;
+
+	time_travel_ext_update_request(time);
+	return true;
+}
+
+static void time_travel_ext_wait(bool idle)
+{
+	struct um_timetravel_msg msg = {
+		.op = UM_TIMETRAVEL_ACK,
+	};
+
+	time_travel_ext_prev_request_valid = false;
+	time_travel_ext_waiting++;
+
+	time_travel_ext_req(UM_TIMETRAVEL_WAIT, -1);
+
+	/*
+	 * Here we are deep in the idle loop, so we have to break out of the
+	 * kernel abstraction in a sense and implement this in terms of the
+	 * UML system waiting on the VQ interrupt while sleeping, when we get
+	 * the signal it'll call time_travel_ext_vq_notify_done() completing the
+	 * call.
+	 */
+	while (msg.op != UM_TIMETRAVEL_RUN)
+		time_travel_handle_message(&msg, idle ? TTMH_IDLE : TTMH_POLL);
+
+	time_travel_ext_waiting--;
+
+	/* we might request more stuff while polling - reset when we run */
+	time_travel_ext_prev_request_valid = false;
+}
+
+static void time_travel_ext_get_time(void)
+{
+	time_travel_ext_req(UM_TIMETRAVEL_GET, -1);
+}
+
+static void __time_travel_update_time(unsigned long long ns, bool idle)
+{
+	if (time_travel_mode == TT_MODE_EXTERNAL && time_travel_ext_request(ns))
+		time_travel_ext_wait(idle);
+	else
+		time_travel_set_time(ns);
+}
+
+static struct time_travel_event *time_travel_first_event(void)
+{
+	return list_first_entry_or_null(&time_travel_events,
+					struct time_travel_event,
+					list);
+}
+
+static void __time_travel_add_event(struct time_travel_event *e,
+				    unsigned long long time)
+{
+	struct time_travel_event *tmp;
+	bool inserted = false;
+
+	if (WARN(time_travel_mode == TT_MODE_BASIC &&
+		 e != &time_travel_timer_event,
+		 "only timer events can be handled in basic mode"))
+		return;
+
+	if (e->pending)
+		return;
+
+	e->pending = true;
+	e->time = time;
+
+	list_for_each_entry(tmp, &time_travel_events, list) {
+		/*
+		 * Add the new entry before one with higher time,
+		 * or if they're equal and both on stack, because
+		 * in that case we need to unwind the stack in the
+		 * right order, and the later event (timer sleep
+		 * or such) must be dequeued first.
+		 */
+		if ((tmp->time > e->time) ||
+		    (tmp->time == e->time && tmp->onstack && e->onstack)) {
+			list_add_tail(&e->list, &tmp->list);
+			inserted = true;
+			break;
+		}
+	}
+
+	if (!inserted)
+		list_add_tail(&e->list, &time_travel_events);
+
+	tmp = time_travel_first_event();
+	time_travel_ext_update_request(tmp->time);
+	time_travel_next_event = tmp->time;
+}
+
+static void time_travel_add_event(struct time_travel_event *e,
+				  unsigned long long time)
+{
+	if (WARN_ON(!e->fn))
+		return;
+
+	__time_travel_add_event(e, time);
+}
+
+void time_travel_periodic_timer(struct time_travel_event *e)
+{
+	time_travel_add_event(&time_travel_timer_event,
+			      time_travel_time + time_travel_timer_interval);
+	deliver_alarm();
+}
+
+static void time_travel_deliver_event(struct time_travel_event *e)
+{
+	if (e == &time_travel_timer_event) {
+		/*
+		 * deliver_alarm() does the irq_enter/irq_exit
+		 * by itself, so must handle it specially here
+		 */
+		e->fn(e);
+	} else {
+		unsigned long flags;
+
+		local_irq_save(flags);
+		irq_enter();
+		e->fn(e);
+		irq_exit();
+		local_irq_restore(flags);
+	}
+}
+
+static bool time_travel_del_event(struct time_travel_event *e)
+{
+	if (!e->pending)
+		return false;
+	list_del(&e->list);
+	e->pending = false;
+	return true;
+}
+
+static void time_travel_update_time(unsigned long long next, bool idle)
+{
+	struct time_travel_event ne = {
+		.onstack = true,
+	};
+	struct time_travel_event *e;
+	bool finished = idle;
+
+	/* add it without a handler - we deal with that specifically below */
+	__time_travel_add_event(&ne, next);
+
+	do {
+		e = time_travel_first_event();
+
+		BUG_ON(!e);
+		__time_travel_update_time(e->time, idle);
+
+		/* new events may have been inserted while we were waiting */
+		if (e == time_travel_first_event()) {
+			BUG_ON(!time_travel_del_event(e));
+			BUG_ON(time_travel_time != e->time);
+
+			if (e == &ne) {
+				finished = true;
+			} else {
+				if (e->onstack)
+					panic("On-stack event dequeued outside of the stack! time=%lld, event time=%lld, event=%pS\n",
+					      time_travel_time, e->time, e);
+				time_travel_deliver_event(e);
+			}
+		}
+
+		e = time_travel_first_event();
+		if (e)
+			time_travel_ext_update_request(e->time);
+	} while (ne.pending && !finished);
+
+	time_travel_del_event(&ne);
+}
+
+void time_travel_ndelay(unsigned long nsec)
+{
+	time_travel_update_time(time_travel_time + nsec, false);
+}
+EXPORT_SYMBOL(time_travel_ndelay);
+
+void time_travel_add_irq_event(struct time_travel_event *e)
+{
+	BUG_ON(time_travel_mode != TT_MODE_EXTERNAL);
+
+	time_travel_ext_get_time();
+	/*
+	 * We could model interrupt latency here, for now just
+	 * don't have any latency at all and request the exact
+	 * same time (again) to run the interrupt...
+	 */
+	time_travel_add_event(e, time_travel_time);
+}
+EXPORT_SYMBOL_GPL(time_travel_add_irq_event);
+
+static void time_travel_oneshot_timer(struct time_travel_event *e)
+{
+	deliver_alarm();
+}
+
+void time_travel_sleep(unsigned long long duration)
+{
+	unsigned long long next = time_travel_time + duration;
+
+	if (time_travel_mode == TT_MODE_BASIC)
+		os_timer_disable();
+
+	time_travel_update_time(next, true);
+
+	if (time_travel_mode == TT_MODE_BASIC &&
+	    time_travel_timer_event.pending) {
+		if (time_travel_timer_event.fn == time_travel_periodic_timer) {
+			/*
+			 * This is somewhat wrong - we should get the first
+			 * one sooner like the os_timer_one_shot() below...
+			 */
+			os_timer_set_interval(time_travel_timer_interval);
+		} else {
+			os_timer_one_shot(time_travel_timer_event.time - next);
+		}
+	}
+}
+
+static void time_travel_handle_real_alarm(void)
+{
+	time_travel_set_time(time_travel_next_event);
+
+	time_travel_del_event(&time_travel_timer_event);
+
+	if (time_travel_timer_event.fn == time_travel_periodic_timer)
+		time_travel_add_event(&time_travel_timer_event,
+				      time_travel_time +
+				      time_travel_timer_interval);
+}
+
+static void time_travel_set_interval(unsigned long long interval)
+{
+	time_travel_timer_interval = interval;
+}
+
+static int time_travel_connect_external(const char *socket)
+{
+	const char *sep;
+	unsigned long long id = (unsigned long long)-1;
+	int rc;
+
+	if ((sep = strchr(socket, ':'))) {
+		char buf[25] = {};
+		if (sep - socket > sizeof(buf) - 1)
+			goto invalid_number;
+
+		memcpy(buf, socket, sep - socket);
+		if (kstrtoull(buf, 0, &id)) {
+invalid_number:
+			panic("time-travel: invalid external ID in string '%s'\n",
+			      socket);
+			return -EINVAL;
+		}
+
+		socket = sep + 1;
+	}
+
+	rc = os_connect_socket(socket);
+	if (rc < 0) {
+		panic("time-travel: failed to connect to external socket %s\n",
+		      socket);
+		return rc;
+	}
+
+	time_travel_ext_fd = rc;
+
+	time_travel_ext_req(UM_TIMETRAVEL_START, id);
+
+	return 1;
+}
+#else /* CONFIG_UML_TIME_TRAVEL_SUPPORT */
 #define time_travel_start_set 0
 #define time_travel_start 0
+#define time_travel_time 0
+
+static inline void time_travel_update_time(unsigned long long ns, bool retearly)
+{
+}
+
+static inline void time_travel_handle_real_alarm(void)
+{
+}
+
+static void time_travel_set_interval(unsigned long long interval)
+{
+}
+
+/* fail link if this actually gets used */
+extern u64 time_travel_ext_req(u32 op, u64 time);
+
+/* these are empty macros so the struct/fn need not exist */
+#define time_travel_add_event(e, time) do { } while (0)
+#define time_travel_del_event(e) do { } while (0)
 #endif
 
 void timer_handler(int sig, struct siginfo *unused_si, struct uml_pt_regs *regs)
@@ -48,7 +512,7 @@ void timer_handler(int sig, struct siginfo *unused_si, struct uml_pt_regs *regs)
 	 * never get any real signals from the OS.
 	 */
 	if (time_travel_mode == TT_MODE_BASIC)
-		time_travel_set_time(time_travel_timer_expiry);
+		time_travel_handle_real_alarm();
 
 	local_irq_save(flags);
 	do_IRQ(TIMER_IRQ, regs);
@@ -58,9 +522,10 @@ void timer_handler(int sig, struct siginfo *unused_si, struct uml_pt_regs *regs)
 static int itimer_shutdown(struct clock_event_device *evt)
 {
 	if (time_travel_mode != TT_MODE_OFF)
-		time_travel_set_timer_mode(TT_TMR_DISABLED);
+		time_travel_del_event(&time_travel_timer_event);
 
-	if (time_travel_mode != TT_MODE_INFCPU)
+	if (time_travel_mode != TT_MODE_INFCPU &&
+	    time_travel_mode != TT_MODE_EXTERNAL)
 		os_timer_disable();
 
 	return 0;
@@ -71,12 +536,16 @@ static int itimer_set_periodic(struct clock_event_device *evt)
 	unsigned long long interval = NSEC_PER_SEC / HZ;
 
 	if (time_travel_mode != TT_MODE_OFF) {
-		time_travel_set_timer_mode(TT_TMR_PERIODIC);
-		time_travel_set_timer_expiry(time_travel_time + interval);
-		time_travel_set_timer_interval(interval);
+		time_travel_del_event(&time_travel_timer_event);
+		time_travel_set_event_fn(&time_travel_timer_event,
+					 time_travel_periodic_timer);
+		time_travel_set_interval(interval);
+		time_travel_add_event(&time_travel_timer_event,
+				      time_travel_time + interval);
 	}
 
-	if (time_travel_mode != TT_MODE_INFCPU)
+	if (time_travel_mode != TT_MODE_INFCPU &&
+	    time_travel_mode != TT_MODE_EXTERNAL)
 		os_timer_set_interval(interval);
 
 	return 0;
@@ -88,11 +557,15 @@ static int itimer_next_event(unsigned long delta,
 	delta += 1;
 
 	if (time_travel_mode != TT_MODE_OFF) {
-		time_travel_set_timer_mode(TT_TMR_ONESHOT);
-		time_travel_set_timer_expiry(time_travel_time + delta);
+		time_travel_del_event(&time_travel_timer_event);
+		time_travel_set_event_fn(&time_travel_timer_event,
+					 time_travel_oneshot_timer);
+		time_travel_add_event(&time_travel_timer_event,
+				      time_travel_time + delta);
 	}
 
-	if (time_travel_mode != TT_MODE_INFCPU)
+	if (time_travel_mode != TT_MODE_INFCPU &&
+	    time_travel_mode != TT_MODE_EXTERNAL)
 		return os_timer_one_shot(delta);
 
 	return 0;
@@ -143,8 +616,17 @@ static u64 timer_read(struct clocksource *cs)
 		 * stuck in loops that expect time to move more than the
 		 * exact requested sleep amount, e.g. python's socket server,
 		 * see https://bugs.python.org/issue37026.
+		 *
+		 * However, don't do that when we're in interrupt or such as
+		 * then we might recurse into our own processing, and get to
+		 * even more waiting, and that's not good - it messes up the
+		 * "what do I do next" and onstack event we use to know when
+		 * to return from time_travel_update_time().
 		 */
-		time_travel_set_time(time_travel_time + TIMER_MULTIPLIER);
+		if (!irqs_disabled() && !in_interrupt() && !in_softirq())
+			time_travel_update_time(time_travel_time +
+						TIMER_MULTIPLIER,
+						false);
 		return time_travel_time / TIMER_MULTIPLIER;
 	}
 
@@ -188,6 +670,8 @@ void read_persistent_clock64(struct timespec64 *ts)
 
 	if (time_travel_start_set)
 		nsecs = time_travel_start + time_travel_time;
+	else if (time_travel_mode == TT_MODE_EXTERNAL)
+		nsecs = time_travel_ext_req(UM_TIMETRAVEL_GET_TOD, -1);
 	else
 		nsecs = os_persistent_clock_emulation();
 
@@ -204,7 +688,8 @@ void __init time_init(void)
 #ifdef CONFIG_UML_TIME_TRAVEL_SUPPORT
 unsigned long calibrate_delay_is_known(void)
 {
-	if (time_travel_mode == TT_MODE_INFCPU)
+	if (time_travel_mode == TT_MODE_INFCPU ||
+	    time_travel_mode == TT_MODE_EXTERNAL)
 		return 1;
 	return 0;
 }
@@ -218,6 +703,13 @@ int setup_time_travel(char *str)
 		return 1;
 	}
 
+	if (strncmp(str, "=ext:", 5) == 0) {
+		time_travel_mode = TT_MODE_EXTERNAL;
+		timer_clockevent.name = "time-travel-timer-external";
+		timer_clocksource.name = "time-travel-clock-external";
+		return time_travel_connect_external(str + 5);
+	}
+
 	if (!*str) {
 		time_travel_mode = TT_MODE_BASIC;
 		timer_clockevent.name = "time-travel-timer";
@@ -242,7 +734,15 @@ __uml_help(setup_time_travel,
 "are no wall clock timers, and any CPU processing happens - as seen from the\n"
 "guest - instantly. This can be useful for accurate simulation regardless of\n"
 "debug overhead, physical CPU speed, etc. but is somewhat dangerous as it can\n"
-"easily lead to getting stuck (e.g. if anything in the system busy loops).\n");
+"easily lead to getting stuck (e.g. if anything in the system busy loops).\n"
+"\n"
+"time-travel=ext:[ID:]/path/to/socket\n"
+"This enables time travel mode similar to =inf-cpu, except the system will\n"
+"use the given socket to coordinate with a central scheduler, in order to\n"
+"have more than one system simultaneously be on simulated time. The virtio\n"
+"driver code in UML knows about this so you can also simulate networks and\n"
+"devices using it, assuming the device has the right capabilities.\n"
+"The optional ID is a 64-bit integer that's sent to the central scheduler.\n");
 
 int setup_time_travel_start(char *str)
 {
diff --git a/arch/um/kernel/uml.lds.S b/arch/um/kernel/uml.lds.S
index 9f21443..3b6dab3 100644
--- a/arch/um/kernel/uml.lds.S
+++ b/arch/um/kernel/uml.lds.S
@@ -19,10 +19,10 @@
   __binary_start = START;
 
   . = START + SIZEOF_HEADERS;
+  . = ALIGN(PAGE_SIZE);
 
   _text = .;
   INIT_TEXT_SECTION(0)
-  . = ALIGN(PAGE_SIZE);
 
   .text      :
   {
diff --git a/arch/um/os-Linux/file.c b/arch/um/os-Linux/file.c
index fbda105..26ecbd6 100644
--- a/arch/um/os-Linux/file.c
+++ b/arch/um/os-Linux/file.c
@@ -5,9 +5,11 @@
 
 #include <stdio.h>
 #include <unistd.h>
+#include <stdlib.h>
 #include <errno.h>
 #include <fcntl.h>
 #include <signal.h>
+#include <linux/falloc.h>
 #include <sys/ioctl.h>
 #include <sys/mount.h>
 #include <sys/socket.h>
@@ -16,6 +18,7 @@
 #include <sys/un.h>
 #include <sys/types.h>
 #include <sys/eventfd.h>
+#include <poll.h>
 #include <os.h>
 
 static void copy_stat(struct uml_stat *dst, const struct stat64 *src)
@@ -664,3 +667,31 @@ int os_sendmsg_fds(int fd, const void *buf, unsigned int len, const int *fds,
 		return -errno;
 	return err;
 }
+
+int os_poll(unsigned int n, const int *fds)
+{
+	/* currently need 2 FDs at most so avoid dynamic allocation */
+	struct pollfd pollfds[2] = {};
+	unsigned int i;
+	int ret;
+
+	if (n > ARRAY_SIZE(pollfds))
+		return -EINVAL;
+
+	for (i = 0; i < n; i++) {
+		pollfds[i].fd = fds[i];
+		pollfds[i].events = POLLIN;
+	}
+
+	ret = poll(pollfds, n, -1);
+	if (ret < 0)
+		return -errno;
+
+	/* Return the index of the available FD */
+	for (i = 0; i < n; i++) {
+		if (pollfds[i].revents)
+			return i;
+	}
+
+	return -EIO;
+}
diff --git a/arch/um/os-Linux/time.c b/arch/um/os-Linux/time.c
index 432f8e1..90f6de2 100644
--- a/arch/um/os-Linux/time.c
+++ b/arch/um/os-Linux/time.c
@@ -14,7 +14,6 @@
 #include <kern_util.h>
 #include <os.h>
 #include <string.h>
-#include <timer-internal.h>
 
 static timer_t event_high_res_timer = 0;
 
diff --git a/arch/um/os-Linux/umid.c b/arch/um/os-Linux/umid.c
index 44def53..9e16078 100644
--- a/arch/um/os-Linux/umid.c
+++ b/arch/um/os-Linux/umid.c
@@ -220,11 +220,12 @@ static void __init create_pid_file(void)
 	char pid[sizeof("nnnnn\0")], *file;
 	int fd, n;
 
-	file = malloc(strlen(uml_dir) + UMID_LEN + sizeof("/pid\0"));
+	n = strlen(uml_dir) + UMID_LEN + sizeof("/pid\0");
+	file = malloc(n);
 	if (!file)
 		return;
 
-	if (umid_file_name("pid", file, sizeof(file)))
+	if (umid_file_name("pid", file, n))
 		goto out;
 
 	fd = open(file, O_RDWR | O_CREAT | O_EXCL, 0644);
diff --git a/arch/unicore32/.gitignore b/arch/unicore32/.gitignore
index 947e99c..e82f3fb 100644
--- a/arch/unicore32/.gitignore
+++ b/arch/unicore32/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 #
 # Generated include files
 #
diff --git a/arch/unicore32/include/asm/page.h b/arch/unicore32/include/asm/page.h
index 8a89335..96d6bdf 100644
--- a/arch/unicore32/include/asm/page.h
+++ b/arch/unicore32/include/asm/page.h
@@ -69,9 +69,6 @@ extern int pfn_valid(unsigned long);
 
 #endif /* !__ASSEMBLY__ */
 
-#define VM_DATA_DEFAULT_FLAGS \
-	(VM_READ | VM_WRITE | VM_EXEC | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
 #include <asm-generic/getorder.h>
 
 #endif
diff --git a/arch/unicore32/include/asm/pgtable.h b/arch/unicore32/include/asm/pgtable.h
index c8f7ba1..3b8731b 100644
--- a/arch/unicore32/include/asm/pgtable.h
+++ b/arch/unicore32/include/asm/pgtable.h
@@ -177,7 +177,6 @@ extern struct page *empty_zero_page;
 #define pte_dirty(pte)		(pte_val(pte) & PTE_DIRTY)
 #define pte_young(pte)		(pte_val(pte) & PTE_YOUNG)
 #define pte_exec(pte)		(pte_val(pte) & PTE_EXEC)
-#define pte_special(pte)	(0)
 
 #define PTE_BIT_FUNC(fn, op) \
 static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
@@ -189,8 +188,6 @@ PTE_BIT_FUNC(mkdirty,   |= PTE_DIRTY);
 PTE_BIT_FUNC(mkold,     &= ~PTE_YOUNG);
 PTE_BIT_FUNC(mkyoung,   |= PTE_YOUNG);
 
-static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
-
 /*
  * Mark the prot value as uncacheable.
  */
diff --git a/arch/unicore32/kernel/puv3-nb0916.c b/arch/unicore32/kernel/puv3-nb0916.c
index a3bf2ff..e251f50 100644
--- a/arch/unicore32/kernel/puv3-nb0916.c
+++ b/arch/unicore32/kernel/puv3-nb0916.c
@@ -55,7 +55,6 @@ static struct pwm_lookup nb0916_pwm_lookup[] = {
 static struct platform_pwm_backlight_data nb0916_backlight_data = {
 	.max_brightness	= 100,
 	.dft_brightness	= 100,
-	.enable_gpio	= -1,
 };
 
 static struct gpio_keys_button nb0916_gpio_keys[] = {
diff --git a/arch/unicore32/mm/fault.c b/arch/unicore32/mm/fault.c
index a9bd08f..3022104 100644
--- a/arch/unicore32/mm/fault.c
+++ b/arch/unicore32/mm/fault.c
@@ -149,7 +149,7 @@ void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
  */
 static inline bool access_error(unsigned int fsr, struct vm_area_struct *vma)
 {
-	unsigned int mask = VM_READ | VM_WRITE | VM_EXEC;
+	unsigned int mask = VM_ACCESS_FLAGS;
 
 	if (!(fsr ^ 0x12))	/* write? */
 		mask = VM_WRITE;
diff --git a/arch/x86/.gitignore b/arch/x86/.gitignore
index 5a82bac..677111a 100644
--- a/arch/x86/.gitignore
+++ b/arch/x86/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 boot/compressed/vmlinux
 tools/test_get_len
 tools/insn_sanity
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 1edf788..1d6104e 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -149,6 +149,7 @@
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_ARCH_TRANSPARENT_HUGEPAGE
 	select HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD if X86_64
+	select HAVE_ARCH_USERFAULTFD_WP		if USERFAULTFD
 	select HAVE_ARCH_VMAP_STACK		if X86_64
 	select HAVE_ARCH_WITHIN_STACK_FRAMES
 	select HAVE_ASM_MODVERSIONS
@@ -1660,6 +1661,7 @@
 	depends on PHYS_ADDR_T_64BIT
 	depends on BLK_DEV
 	select X86_PMEM_LEGACY_DEVICE
+	select NUMA_KEEP_MEMINFO if NUMA
 	select LIBNVDIMM
 	help
 	  Treat memory marked using the non-standard e820 type of 12 as used
@@ -2930,3 +2932,5 @@
 source "drivers/firmware/Kconfig"
 
 source "arch/x86/kvm/Kconfig"
+
+source "arch/x86/Kconfig.assembler"
diff --git a/arch/x86/Kconfig.assembler b/arch/x86/Kconfig.assembler
new file mode 100644
index 0000000..13de0db
--- /dev/null
+++ b/arch/x86/Kconfig.assembler
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2020 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
+
+config AS_AVX512
+	def_bool $(as-instr,vpmovm2b %k1$(comma)%zmm5)
+	help
+	  Supported by binutils >= 2.25 and LLVM integrated assembler
+
+config AS_SHA1_NI
+	def_bool $(as-instr,sha1msg1 %xmm0$(comma)%xmm1)
+	help
+	  Supported by binutils >= 2.24 and LLVM integrated assembler
+
+config AS_SHA256_NI
+	def_bool $(as-instr,sha256msg1 %xmm0$(comma)%xmm1)
+	help
+	  Supported by binutils >= 2.24 and LLVM integrated assembler
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 513a555..b65ec63 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -177,28 +177,6 @@
 	KBUILD_CFLAGS += $(call cc-option,-maccumulate-outgoing-args,)
 endif
 
-# Stackpointer is addressed different for 32 bit and 64 bit x86
-sp-$(CONFIG_X86_32) := esp
-sp-$(CONFIG_X86_64) := rsp
-
-# do binutils support CFI?
-cfi := $(call as-instr,.cfi_startproc\n.cfi_rel_offset $(sp-y)$(comma)0\n.cfi_endproc,-DCONFIG_AS_CFI=1)
-# is .cfi_signal_frame supported too?
-cfi-sigframe := $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1)
-cfi-sections := $(call as-instr,.cfi_sections .debug_frame,-DCONFIG_AS_CFI_SECTIONS=1)
-
-# does binutils support specific instructions?
-asinstr += $(call as-instr,pshufb %xmm0$(comma)%xmm0,-DCONFIG_AS_SSSE3=1)
-avx_instr := $(call as-instr,vxorps %ymm0$(comma)%ymm1$(comma)%ymm2,-DCONFIG_AS_AVX=1)
-avx2_instr :=$(call as-instr,vpbroadcastb %xmm0$(comma)%ymm1,-DCONFIG_AS_AVX2=1)
-avx512_instr :=$(call as-instr,vpmovm2b %k1$(comma)%zmm5,-DCONFIG_AS_AVX512=1)
-sha1_ni_instr :=$(call as-instr,sha1msg1 %xmm0$(comma)%xmm1,-DCONFIG_AS_SHA1_NI=1)
-sha256_ni_instr :=$(call as-instr,sha256msg1 %xmm0$(comma)%xmm1,-DCONFIG_AS_SHA256_NI=1)
-adx_instr := $(call as-instr,adox %r10$(comma)%r10,-DCONFIG_AS_ADX=1)
-
-KBUILD_AFLAGS += $(cfi) $(cfi-sigframe) $(cfi-sections) $(asinstr) $(avx_instr) $(avx2_instr) $(avx512_instr) $(sha1_ni_instr) $(sha256_ni_instr) $(adx_instr)
-KBUILD_CFLAGS += $(cfi) $(cfi-sigframe) $(cfi-sections) $(asinstr) $(avx_instr) $(avx2_instr) $(avx512_instr) $(sha1_ni_instr) $(sha256_ni_instr) $(adx_instr)
-
 KBUILD_LDFLAGS := -m elf_$(UTS_MACHINE)
 
 #
diff --git a/arch/x86/boot/.gitignore b/arch/x86/boot/.gitignore
index 09d25dd..9cc7f13 100644
--- a/arch/x86/boot/.gitignore
+++ b/arch/x86/boot/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 bootsect
 bzImage
 cpustr.h
diff --git a/arch/x86/boot/compressed/.gitignore b/arch/x86/boot/compressed/.gitignore
index 4a46fab..2580519 100644
--- a/arch/x86/boot/compressed/.gitignore
+++ b/arch/x86/boot/compressed/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 relocs
 vmlinux.bin.all
 vmlinux.relocs
diff --git a/arch/x86/boot/tools/.gitignore b/arch/x86/boot/tools/.gitignore
index 378eac2..ae91f4d 100644
--- a/arch/x86/boot/tools/.gitignore
+++ b/arch/x86/boot/tools/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 build
diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig
index 5b602be..5509045 100644
--- a/arch/x86/configs/i386_defconfig
+++ b/arch/x86/configs/i386_defconfig
@@ -136,7 +136,6 @@
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SPI_ATTRS=y
@@ -286,7 +285,6 @@
 CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_DEBUG_RODATA_TEST is not set
 CONFIG_DEBUG_BOOT_PARAMS=y
-CONFIG_OPTIMIZE_INLINING=y
 CONFIG_SECURITY=y
 CONFIG_SECURITY_NETWORK=y
 CONFIG_SECURITY_SELINUX=y
diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
index f3d1f36..6149610 100644
--- a/arch/x86/configs/x86_64_defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -134,7 +134,6 @@
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SPI_ATTRS=y
@@ -283,7 +282,6 @@
 CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_DEBUG_RODATA_TEST is not set
 CONFIG_DEBUG_BOOT_PARAMS=y
-CONFIG_OPTIMIZE_INLINING=y
 CONFIG_UNWINDER_ORC=y
 CONFIG_SECURITY=y
 CONFIG_SECURITY_NETWORK=y
diff --git a/arch/x86/crypto/.gitignore b/arch/x86/crypto/.gitignore
index 30be040..580c839 100644
--- a/arch/x86/crypto/.gitignore
+++ b/arch/x86/crypto/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 poly1305-x86_64-cryptogams.S
diff --git a/arch/x86/crypto/Makefile b/arch/x86/crypto/Makefile
index 8c2e9ea..a31de0c 100644
--- a/arch/x86/crypto/Makefile
+++ b/arch/x86/crypto/Makefile
@@ -1,131 +1,97 @@
 # SPDX-License-Identifier: GPL-2.0
 #
-# Arch-specific CryptoAPI modules.
-#
+# x86 crypto algorithms
 
 OBJECT_FILES_NON_STANDARD := y
 
-avx_supported := $(call as-instr,vpxor %xmm0$(comma)%xmm0$(comma)%xmm0,yes,no)
-avx2_supported := $(call as-instr,vpgatherdd %ymm0$(comma)(%eax$(comma)%ymm1\
-				$(comma)4)$(comma)%ymm2,yes,no)
-avx512_supported :=$(call as-instr,vpmovm2b %k1$(comma)%zmm5,yes,no)
-sha1_ni_supported :=$(call as-instr,sha1msg1 %xmm0$(comma)%xmm1,yes,no)
-sha256_ni_supported :=$(call as-instr,sha256msg1 %xmm0$(comma)%xmm1,yes,no)
-adx_supported := $(call as-instr,adox %r10$(comma)%r10,yes,no)
-
 obj-$(CONFIG_CRYPTO_GLUE_HELPER_X86) += glue_helper.o
 
 obj-$(CONFIG_CRYPTO_TWOFISH_586) += twofish-i586.o
+twofish-i586-y := twofish-i586-asm_32.o twofish_glue.o
+obj-$(CONFIG_CRYPTO_TWOFISH_X86_64) += twofish-x86_64.o
+twofish-x86_64-y := twofish-x86_64-asm_64.o twofish_glue.o
+obj-$(CONFIG_CRYPTO_TWOFISH_X86_64_3WAY) += twofish-x86_64-3way.o
+twofish-x86_64-3way-y := twofish-x86_64-asm_64-3way.o twofish_glue_3way.o
+obj-$(CONFIG_CRYPTO_TWOFISH_AVX_X86_64) += twofish-avx-x86_64.o
+twofish-avx-x86_64-y := twofish-avx-x86_64-asm_64.o twofish_avx_glue.o
+
 obj-$(CONFIG_CRYPTO_SERPENT_SSE2_586) += serpent-sse2-i586.o
+serpent-sse2-i586-y := serpent-sse2-i586-asm_32.o serpent_sse2_glue.o
+obj-$(CONFIG_CRYPTO_SERPENT_SSE2_X86_64) += serpent-sse2-x86_64.o
+serpent-sse2-x86_64-y := serpent-sse2-x86_64-asm_64.o serpent_sse2_glue.o
+obj-$(CONFIG_CRYPTO_SERPENT_AVX_X86_64) += serpent-avx-x86_64.o
+serpent-avx-x86_64-y := serpent-avx-x86_64-asm_64.o serpent_avx_glue.o
+obj-$(CONFIG_CRYPTO_SERPENT_AVX2_X86_64) += serpent-avx2.o
+serpent-avx2-y := serpent-avx2-asm_64.o serpent_avx2_glue.o
 
 obj-$(CONFIG_CRYPTO_DES3_EDE_X86_64) += des3_ede-x86_64.o
-obj-$(CONFIG_CRYPTO_CAMELLIA_X86_64) += camellia-x86_64.o
-obj-$(CONFIG_CRYPTO_BLOWFISH_X86_64) += blowfish-x86_64.o
-obj-$(CONFIG_CRYPTO_TWOFISH_X86_64) += twofish-x86_64.o
-obj-$(CONFIG_CRYPTO_TWOFISH_X86_64_3WAY) += twofish-x86_64-3way.o
-obj-$(CONFIG_CRYPTO_CHACHA20_X86_64) += chacha-x86_64.o
-obj-$(CONFIG_CRYPTO_SERPENT_SSE2_X86_64) += serpent-sse2-x86_64.o
-obj-$(CONFIG_CRYPTO_AES_NI_INTEL) += aesni-intel.o
-obj-$(CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL) += ghash-clmulni-intel.o
+des3_ede-x86_64-y := des3_ede-asm_64.o des3_ede_glue.o
 
-obj-$(CONFIG_CRYPTO_CRC32C_INTEL) += crc32c-intel.o
-obj-$(CONFIG_CRYPTO_SHA1_SSSE3) += sha1-ssse3.o
-obj-$(CONFIG_CRYPTO_CRC32_PCLMUL) += crc32-pclmul.o
-obj-$(CONFIG_CRYPTO_SHA256_SSSE3) += sha256-ssse3.o
-obj-$(CONFIG_CRYPTO_SHA512_SSSE3) += sha512-ssse3.o
-obj-$(CONFIG_CRYPTO_CRCT10DIF_PCLMUL) += crct10dif-pclmul.o
-obj-$(CONFIG_CRYPTO_POLY1305_X86_64) += poly1305-x86_64.o
+obj-$(CONFIG_CRYPTO_CAMELLIA_X86_64) += camellia-x86_64.o
+camellia-x86_64-y := camellia-x86_64-asm_64.o camellia_glue.o
+obj-$(CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64) += camellia-aesni-avx-x86_64.o
+camellia-aesni-avx-x86_64-y := camellia-aesni-avx-asm_64.o camellia_aesni_avx_glue.o
+obj-$(CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64) += camellia-aesni-avx2.o
+camellia-aesni-avx2-y := camellia-aesni-avx2-asm_64.o camellia_aesni_avx2_glue.o
+
+obj-$(CONFIG_CRYPTO_BLOWFISH_X86_64) += blowfish-x86_64.o
+blowfish-x86_64-y := blowfish-x86_64-asm_64.o blowfish_glue.o
+
+obj-$(CONFIG_CRYPTO_CAST5_AVX_X86_64) += cast5-avx-x86_64.o
+cast5-avx-x86_64-y := cast5-avx-x86_64-asm_64.o cast5_avx_glue.o
+
+obj-$(CONFIG_CRYPTO_CAST6_AVX_X86_64) += cast6-avx-x86_64.o
+cast6-avx-x86_64-y := cast6-avx-x86_64-asm_64.o cast6_avx_glue.o
 
 obj-$(CONFIG_CRYPTO_AEGIS128_AESNI_SSE2) += aegis128-aesni.o
-
-obj-$(CONFIG_CRYPTO_NHPOLY1305_SSE2) += nhpoly1305-sse2.o
-obj-$(CONFIG_CRYPTO_NHPOLY1305_AVX2) += nhpoly1305-avx2.o
-
-# These modules require the assembler to support ADX.
-ifeq ($(adx_supported),yes)
-	obj-$(CONFIG_CRYPTO_CURVE25519_X86) += curve25519-x86_64.o
-endif
-
-# These modules require assembler to support AVX.
-ifeq ($(avx_supported),yes)
-	obj-$(CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64) += \
-						camellia-aesni-avx-x86_64.o
-	obj-$(CONFIG_CRYPTO_CAST5_AVX_X86_64) += cast5-avx-x86_64.o
-	obj-$(CONFIG_CRYPTO_CAST6_AVX_X86_64) += cast6-avx-x86_64.o
-	obj-$(CONFIG_CRYPTO_TWOFISH_AVX_X86_64) += twofish-avx-x86_64.o
-	obj-$(CONFIG_CRYPTO_SERPENT_AVX_X86_64) += serpent-avx-x86_64.o
-	obj-$(CONFIG_CRYPTO_BLAKE2S_X86) += blake2s-x86_64.o
-endif
-
-# These modules require assembler to support AVX2.
-ifeq ($(avx2_supported),yes)
-	obj-$(CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64) += camellia-aesni-avx2.o
-	obj-$(CONFIG_CRYPTO_SERPENT_AVX2_X86_64) += serpent-avx2.o
-endif
-
-twofish-i586-y := twofish-i586-asm_32.o twofish_glue.o
-serpent-sse2-i586-y := serpent-sse2-i586-asm_32.o serpent_sse2_glue.o
-
-des3_ede-x86_64-y := des3_ede-asm_64.o des3_ede_glue.o
-camellia-x86_64-y := camellia-x86_64-asm_64.o camellia_glue.o
-blowfish-x86_64-y := blowfish-x86_64-asm_64.o blowfish_glue.o
-twofish-x86_64-y := twofish-x86_64-asm_64.o twofish_glue.o
-twofish-x86_64-3way-y := twofish-x86_64-asm_64-3way.o twofish_glue_3way.o
-chacha-x86_64-y := chacha-ssse3-x86_64.o chacha_glue.o
-serpent-sse2-x86_64-y := serpent-sse2-x86_64-asm_64.o serpent_sse2_glue.o
-
 aegis128-aesni-y := aegis128-aesni-asm.o aegis128-aesni-glue.o
 
-nhpoly1305-sse2-y := nh-sse2-x86_64.o nhpoly1305-sse2-glue.o
-blake2s-x86_64-y := blake2s-core.o blake2s-glue.o
-poly1305-x86_64-y := poly1305-x86_64-cryptogams.o poly1305_glue.o
-ifneq ($(CONFIG_CRYPTO_POLY1305_X86_64),)
-targets += poly1305-x86_64-cryptogams.S
-endif
+obj-$(CONFIG_CRYPTO_CHACHA20_X86_64) += chacha-x86_64.o
+chacha-x86_64-y := chacha-avx2-x86_64.o chacha-ssse3-x86_64.o chacha_glue.o
+chacha-x86_64-$(CONFIG_AS_AVX512) += chacha-avx512vl-x86_64.o
 
-ifeq ($(avx_supported),yes)
-	camellia-aesni-avx-x86_64-y := camellia-aesni-avx-asm_64.o \
-					camellia_aesni_avx_glue.o
-	cast5-avx-x86_64-y := cast5-avx-x86_64-asm_64.o cast5_avx_glue.o
-	cast6-avx-x86_64-y := cast6-avx-x86_64-asm_64.o cast6_avx_glue.o
-	twofish-avx-x86_64-y := twofish-avx-x86_64-asm_64.o \
-				twofish_avx_glue.o
-	serpent-avx-x86_64-y := serpent-avx-x86_64-asm_64.o \
-				serpent_avx_glue.o
-endif
-
-ifeq ($(avx2_supported),yes)
-	camellia-aesni-avx2-y := camellia-aesni-avx2-asm_64.o camellia_aesni_avx2_glue.o
-	chacha-x86_64-y += chacha-avx2-x86_64.o
-	serpent-avx2-y := serpent-avx2-asm_64.o serpent_avx2_glue.o
-
-	nhpoly1305-avx2-y := nh-avx2-x86_64.o nhpoly1305-avx2-glue.o
-endif
-
-ifeq ($(avx512_supported),yes)
-	chacha-x86_64-y += chacha-avx512vl-x86_64.o
-endif
-
+obj-$(CONFIG_CRYPTO_AES_NI_INTEL) += aesni-intel.o
 aesni-intel-y := aesni-intel_asm.o aesni-intel_glue.o
 aesni-intel-$(CONFIG_64BIT) += aesni-intel_avx-x86_64.o aes_ctrby8_avx-x86_64.o
+
+obj-$(CONFIG_CRYPTO_SHA1_SSSE3) += sha1-ssse3.o
+sha1-ssse3-y := sha1_avx2_x86_64_asm.o sha1_ssse3_asm.o sha1_ssse3_glue.o
+sha1-ssse3-$(CONFIG_AS_SHA1_NI) += sha1_ni_asm.o
+
+obj-$(CONFIG_CRYPTO_SHA256_SSSE3) += sha256-ssse3.o
+sha256-ssse3-y := sha256-ssse3-asm.o sha256-avx-asm.o sha256-avx2-asm.o sha256_ssse3_glue.o
+sha256-ssse3-$(CONFIG_AS_SHA256_NI) += sha256_ni_asm.o
+
+obj-$(CONFIG_CRYPTO_SHA512_SSSE3) += sha512-ssse3.o
+sha512-ssse3-y := sha512-ssse3-asm.o sha512-avx-asm.o sha512-avx2-asm.o sha512_ssse3_glue.o
+
+obj-$(CONFIG_CRYPTO_BLAKE2S_X86) += blake2s-x86_64.o
+blake2s-x86_64-y := blake2s-core.o blake2s-glue.o
+
+obj-$(CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL) += ghash-clmulni-intel.o
 ghash-clmulni-intel-y := ghash-clmulni-intel_asm.o ghash-clmulni-intel_glue.o
-sha1-ssse3-y := sha1_ssse3_asm.o sha1_ssse3_glue.o
-ifeq ($(avx2_supported),yes)
-sha1-ssse3-y += sha1_avx2_x86_64_asm.o
-endif
-ifeq ($(sha1_ni_supported),yes)
-sha1-ssse3-y += sha1_ni_asm.o
-endif
+
+obj-$(CONFIG_CRYPTO_CRC32C_INTEL) += crc32c-intel.o
 crc32c-intel-y := crc32c-intel_glue.o
 crc32c-intel-$(CONFIG_64BIT) += crc32c-pcl-intel-asm_64.o
+
+obj-$(CONFIG_CRYPTO_CRC32_PCLMUL) += crc32-pclmul.o
 crc32-pclmul-y := crc32-pclmul_asm.o crc32-pclmul_glue.o
-sha256-ssse3-y := sha256-ssse3-asm.o sha256-avx-asm.o sha256-avx2-asm.o sha256_ssse3_glue.o
-ifeq ($(sha256_ni_supported),yes)
-sha256-ssse3-y += sha256_ni_asm.o
-endif
-sha512-ssse3-y := sha512-ssse3-asm.o sha512-avx-asm.o sha512-avx2-asm.o sha512_ssse3_glue.o
+
+obj-$(CONFIG_CRYPTO_CRCT10DIF_PCLMUL) += crct10dif-pclmul.o
 crct10dif-pclmul-y := crct10dif-pcl-asm_64.o crct10dif-pclmul_glue.o
 
+obj-$(CONFIG_CRYPTO_POLY1305_X86_64) += poly1305-x86_64.o
+poly1305-x86_64-y := poly1305-x86_64-cryptogams.o poly1305_glue.o
+targets += poly1305-x86_64-cryptogams.S
+
+obj-$(CONFIG_CRYPTO_NHPOLY1305_SSE2) += nhpoly1305-sse2.o
+nhpoly1305-sse2-y := nh-sse2-x86_64.o nhpoly1305-sse2-glue.o
+obj-$(CONFIG_CRYPTO_NHPOLY1305_AVX2) += nhpoly1305-avx2.o
+nhpoly1305-avx2-y := nh-avx2-x86_64.o nhpoly1305-avx2-glue.o
+
+obj-$(CONFIG_CRYPTO_CURVE25519_X86) += curve25519-x86_64.o
+
 quiet_cmd_perlasm = PERLASM $@
       cmd_perlasm = $(PERL) $< > $@
 $(obj)/%.S: $(src)/%.pl FORCE
diff --git a/arch/x86/crypto/aesni-intel_avx-x86_64.S b/arch/x86/crypto/aesni-intel_avx-x86_64.S
index bfa1c0b..0cea332 100644
--- a/arch/x86/crypto/aesni-intel_avx-x86_64.S
+++ b/arch/x86/crypto/aesni-intel_avx-x86_64.S
@@ -886,7 +886,6 @@
 _partial_block_done_\@:
 .endm # PARTIAL_BLOCK
 
-#ifdef CONFIG_AS_AVX
 ###############################################################################
 # GHASH_MUL MACRO to implement: Data*HashKey mod (128,127,126,121,0)
 # Input: A and B (128-bits each, bit-reflected)
@@ -1869,9 +1868,6 @@
         ret
 SYM_FUNC_END(aesni_gcm_finalize_avx_gen2)
 
-#endif /* CONFIG_AS_AVX */
-
-#ifdef CONFIG_AS_AVX2
 ###############################################################################
 # GHASH_MUL MACRO to implement: Data*HashKey mod (128,127,126,121,0)
 # Input: A and B (128-bits each, bit-reflected)
@@ -2839,5 +2835,3 @@
         FUNC_RESTORE
         ret
 SYM_FUNC_END(aesni_gcm_finalize_avx_gen4)
-
-#endif /* CONFIG_AS_AVX2 */
diff --git a/arch/x86/crypto/aesni-intel_glue.c b/arch/x86/crypto/aesni-intel_glue.c
index 75b6ea2..ad8a718 100644
--- a/arch/x86/crypto/aesni-intel_glue.c
+++ b/arch/x86/crypto/aesni-intel_glue.c
@@ -185,7 +185,6 @@ static const struct aesni_gcm_tfm_s aesni_gcm_tfm_sse = {
 	.finalize = &aesni_gcm_finalize,
 };
 
-#ifdef CONFIG_AS_AVX
 asmlinkage void aes_ctr_enc_128_avx_by8(const u8 *in, u8 *iv,
 		void *keys, u8 *out, unsigned int num_bytes);
 asmlinkage void aes_ctr_enc_192_avx_by8(const u8 *in, u8 *iv,
@@ -234,9 +233,6 @@ static const struct aesni_gcm_tfm_s aesni_gcm_tfm_avx_gen2 = {
 	.finalize = &aesni_gcm_finalize_avx_gen2,
 };
 
-#endif
-
-#ifdef CONFIG_AS_AVX2
 /*
  * asmlinkage void aesni_gcm_init_avx_gen4()
  * gcm_data *my_ctx_data, context data
@@ -279,8 +275,6 @@ static const struct aesni_gcm_tfm_s aesni_gcm_tfm_avx_gen4 = {
 	.finalize = &aesni_gcm_finalize_avx_gen4,
 };
 
-#endif
-
 static inline struct
 aesni_rfc4106_gcm_ctx *aesni_rfc4106_gcm_ctx_get(struct crypto_aead *tfm)
 {
@@ -476,7 +470,6 @@ static void ctr_crypt_final(struct crypto_aes_ctx *ctx,
 	crypto_inc(ctrblk, AES_BLOCK_SIZE);
 }
 
-#ifdef CONFIG_AS_AVX
 static void aesni_ctr_enc_avx_tfm(struct crypto_aes_ctx *ctx, u8 *out,
 			      const u8 *in, unsigned int len, u8 *iv)
 {
@@ -493,7 +486,6 @@ static void aesni_ctr_enc_avx_tfm(struct crypto_aes_ctx *ctx, u8 *out,
 	else
 		aes_ctr_enc_256_avx_by8(in, iv, (void *)ctx, out, len);
 }
-#endif
 
 static int ctr_crypt(struct skcipher_request *req)
 {
@@ -711,14 +703,10 @@ static int gcmaes_crypt_by_sg(bool enc, struct aead_request *req,
 	if (!enc)
 		left -= auth_tag_len;
 
-#ifdef CONFIG_AS_AVX2
 	if (left < AVX_GEN4_OPTSIZE && gcm_tfm == &aesni_gcm_tfm_avx_gen4)
 		gcm_tfm = &aesni_gcm_tfm_avx_gen2;
-#endif
-#ifdef CONFIG_AS_AVX
 	if (left < AVX_GEN2_OPTSIZE && gcm_tfm == &aesni_gcm_tfm_avx_gen2)
 		gcm_tfm = &aesni_gcm_tfm_sse;
-#endif
 
 	/* Linearize assoc, if not already linear */
 	if (req->src->length >= assoclen && req->src->length &&
@@ -1076,31 +1064,24 @@ static int __init aesni_init(void)
 	if (!x86_match_cpu(aesni_cpu_id))
 		return -ENODEV;
 #ifdef CONFIG_X86_64
-#ifdef CONFIG_AS_AVX2
 	if (boot_cpu_has(X86_FEATURE_AVX2)) {
 		pr_info("AVX2 version of gcm_enc/dec engaged.\n");
 		aesni_gcm_tfm = &aesni_gcm_tfm_avx_gen4;
 	} else
-#endif
-#ifdef CONFIG_AS_AVX
 	if (boot_cpu_has(X86_FEATURE_AVX)) {
 		pr_info("AVX version of gcm_enc/dec engaged.\n");
 		aesni_gcm_tfm = &aesni_gcm_tfm_avx_gen2;
-	} else
-#endif
-	{
+	} else {
 		pr_info("SSE version of gcm_enc/dec engaged.\n");
 		aesni_gcm_tfm = &aesni_gcm_tfm_sse;
 	}
 	aesni_ctr_enc_tfm = aesni_ctr_enc;
-#ifdef CONFIG_AS_AVX
 	if (boot_cpu_has(X86_FEATURE_AVX)) {
 		/* optimize performance of ctr mode encryption transform */
 		aesni_ctr_enc_tfm = aesni_ctr_enc_avx_tfm;
 		pr_info("AES CTR mode by8 optimization enabled\n");
 	}
 #endif
-#endif
 
 	err = crypto_register_alg(&aesni_cipher_alg);
 	if (err)
diff --git a/arch/x86/crypto/blake2s-core.S b/arch/x86/crypto/blake2s-core.S
index 24910b7..2ca7997 100644
--- a/arch/x86/crypto/blake2s-core.S
+++ b/arch/x86/crypto/blake2s-core.S
@@ -46,7 +46,6 @@
 #endif /* CONFIG_AS_AVX512 */
 
 .text
-#ifdef CONFIG_AS_SSSE3
 SYM_FUNC_START(blake2s_compress_ssse3)
 	testq		%rdx,%rdx
 	je		.Lendofloop
@@ -174,7 +173,6 @@
 .Lendofloop:
 	ret
 SYM_FUNC_END(blake2s_compress_ssse3)
-#endif /* CONFIG_AS_SSSE3 */
 
 #ifdef CONFIG_AS_AVX512
 SYM_FUNC_START(blake2s_compress_avx512)
diff --git a/arch/x86/crypto/chacha_glue.c b/arch/x86/crypto/chacha_glue.c
index 68a7495..b412c21 100644
--- a/arch/x86/crypto/chacha_glue.c
+++ b/arch/x86/crypto/chacha_glue.c
@@ -79,8 +79,7 @@ static void chacha_dosimd(u32 *state, u8 *dst, const u8 *src,
 		}
 	}
 
-	if (IS_ENABLED(CONFIG_AS_AVX2) &&
-	    static_branch_likely(&chacha_use_avx2)) {
+	if (static_branch_likely(&chacha_use_avx2)) {
 		while (bytes >= CHACHA_BLOCK_SIZE * 8) {
 			chacha_8block_xor_avx2(state, dst, src, bytes, nrounds);
 			bytes -= CHACHA_BLOCK_SIZE * 8;
@@ -288,8 +287,7 @@ static int __init chacha_simd_mod_init(void)
 
 	static_branch_enable(&chacha_use_simd);
 
-	if (IS_ENABLED(CONFIG_AS_AVX2) &&
-	    boot_cpu_has(X86_FEATURE_AVX) &&
+	if (boot_cpu_has(X86_FEATURE_AVX) &&
 	    boot_cpu_has(X86_FEATURE_AVX2) &&
 	    cpu_has_xfeatures(XFEATURE_MASK_SSE | XFEATURE_MASK_YMM, NULL)) {
 		static_branch_enable(&chacha_use_avx2);
diff --git a/arch/x86/crypto/poly1305-x86_64-cryptogams.pl b/arch/x86/crypto/poly1305-x86_64-cryptogams.pl
index 7a6b538..137edcf 100644
--- a/arch/x86/crypto/poly1305-x86_64-cryptogams.pl
+++ b/arch/x86/crypto/poly1305-x86_64-cryptogams.pl
@@ -404,10 +404,6 @@
 &end_function("poly1305_emit_x86_64");
 if ($avx) {
 
-if($kernel) {
-	$code .= "#ifdef CONFIG_AS_AVX\n";
-}
-
 ########################################################################
 # Layout of opaque area is following.
 #
@@ -1516,16 +1512,8 @@
 ___
 &end_function("poly1305_emit_avx");
 
-if ($kernel) {
-	$code .= "#endif\n";
-}
-
 if ($avx>1) {
 
-if ($kernel) {
-	$code .= "#ifdef CONFIG_AS_AVX2\n";
-}
-
 my ($H0,$H1,$H2,$H3,$H4, $MASK, $T4,$T0,$T1,$T2,$T3, $D0,$D1,$D2,$D3,$D4) =
     map("%ymm$_",(0..15));
 my $S4=$MASK;
@@ -2816,10 +2804,6 @@
 poly1305_blocks_avxN(0);
 &end_function("poly1305_blocks_avx2");
 
-if($kernel) {
-	$code .= "#endif\n";
-}
-
 #######################################################################
 if ($avx>2) {
 # On entry we have input length divisible by 64. But since inner loop
diff --git a/arch/x86/crypto/poly1305_glue.c b/arch/x86/crypto/poly1305_glue.c
index 79bb587..6dfec19 100644
--- a/arch/x86/crypto/poly1305_glue.c
+++ b/arch/x86/crypto/poly1305_glue.c
@@ -94,7 +94,7 @@ static void poly1305_simd_blocks(void *ctx, const u8 *inp, size_t len,
 	BUILD_BUG_ON(PAGE_SIZE < POLY1305_BLOCK_SIZE ||
 		     PAGE_SIZE % POLY1305_BLOCK_SIZE);
 
-	if (!IS_ENABLED(CONFIG_AS_AVX) || !static_branch_likely(&poly1305_use_avx) ||
+	if (!static_branch_likely(&poly1305_use_avx) ||
 	    (len < (POLY1305_BLOCK_SIZE * 18) && !state->is_base2_26) ||
 	    !crypto_simd_usable()) {
 		convert_to_base2_64(ctx);
@@ -108,7 +108,7 @@ static void poly1305_simd_blocks(void *ctx, const u8 *inp, size_t len,
 		kernel_fpu_begin();
 		if (IS_ENABLED(CONFIG_AS_AVX512) && static_branch_likely(&poly1305_use_avx512))
 			poly1305_blocks_avx512(ctx, inp, bytes, padbit);
-		else if (IS_ENABLED(CONFIG_AS_AVX2) && static_branch_likely(&poly1305_use_avx2))
+		else if (static_branch_likely(&poly1305_use_avx2))
 			poly1305_blocks_avx2(ctx, inp, bytes, padbit);
 		else
 			poly1305_blocks_avx(ctx, inp, bytes, padbit);
@@ -123,7 +123,7 @@ static void poly1305_simd_blocks(void *ctx, const u8 *inp, size_t len,
 static void poly1305_simd_emit(void *ctx, u8 mac[POLY1305_DIGEST_SIZE],
 			       const u32 nonce[4])
 {
-	if (!IS_ENABLED(CONFIG_AS_AVX) || !static_branch_likely(&poly1305_use_avx))
+	if (!static_branch_likely(&poly1305_use_avx))
 		poly1305_emit_x86_64(ctx, mac, nonce);
 	else
 		poly1305_emit_avx(ctx, mac, nonce);
@@ -261,11 +261,10 @@ static struct shash_alg alg = {
 
 static int __init poly1305_simd_mod_init(void)
 {
-	if (IS_ENABLED(CONFIG_AS_AVX) && boot_cpu_has(X86_FEATURE_AVX) &&
+	if (boot_cpu_has(X86_FEATURE_AVX) &&
 	    cpu_has_xfeatures(XFEATURE_MASK_SSE | XFEATURE_MASK_YMM, NULL))
 		static_branch_enable(&poly1305_use_avx);
-	if (IS_ENABLED(CONFIG_AS_AVX2) && boot_cpu_has(X86_FEATURE_AVX) &&
-	    boot_cpu_has(X86_FEATURE_AVX2) &&
+	if (boot_cpu_has(X86_FEATURE_AVX) && boot_cpu_has(X86_FEATURE_AVX2) &&
 	    cpu_has_xfeatures(XFEATURE_MASK_SSE | XFEATURE_MASK_YMM, NULL))
 		static_branch_enable(&poly1305_use_avx2);
 	if (IS_ENABLED(CONFIG_AS_AVX512) && boot_cpu_has(X86_FEATURE_AVX) &&
diff --git a/arch/x86/crypto/sha1_ssse3_asm.S b/arch/x86/crypto/sha1_ssse3_asm.S
index 12e2d19..d25668d 100644
--- a/arch/x86/crypto/sha1_ssse3_asm.S
+++ b/arch/x86/crypto/sha1_ssse3_asm.S
@@ -467,8 +467,6 @@
  */
 SHA1_VECTOR_ASM     sha1_transform_ssse3
 
-#ifdef CONFIG_AS_AVX
-
 .macro W_PRECALC_AVX
 
 .purgem W_PRECALC_00_15
@@ -553,5 +551,3 @@
  *				       const u8 *data, int blocks);
  */
 SHA1_VECTOR_ASM     sha1_transform_avx
-
-#endif
diff --git a/arch/x86/crypto/sha1_ssse3_glue.c b/arch/x86/crypto/sha1_ssse3_glue.c
index d70b40a..a801ffc 100644
--- a/arch/x86/crypto/sha1_ssse3_glue.c
+++ b/arch/x86/crypto/sha1_ssse3_glue.c
@@ -114,7 +114,6 @@ static void unregister_sha1_ssse3(void)
 		crypto_unregister_shash(&sha1_ssse3_alg);
 }
 
-#ifdef CONFIG_AS_AVX
 asmlinkage void sha1_transform_avx(struct sha1_state *state,
 				   const u8 *data, int blocks);
 
@@ -175,13 +174,6 @@ static void unregister_sha1_avx(void)
 		crypto_unregister_shash(&sha1_avx_alg);
 }
 
-#else  /* CONFIG_AS_AVX */
-static inline int register_sha1_avx(void) { return 0; }
-static inline void unregister_sha1_avx(void) { }
-#endif /* CONFIG_AS_AVX */
-
-
-#if defined(CONFIG_AS_AVX2) && (CONFIG_AS_AVX)
 #define SHA1_AVX2_BLOCK_OPTSIZE	4	/* optimal 4*64 bytes of SHA1 blocks */
 
 asmlinkage void sha1_transform_avx2(struct sha1_state *state,
@@ -253,11 +245,6 @@ static void unregister_sha1_avx2(void)
 		crypto_unregister_shash(&sha1_avx2_alg);
 }
 
-#else
-static inline int register_sha1_avx2(void) { return 0; }
-static inline void unregister_sha1_avx2(void) { }
-#endif
-
 #ifdef CONFIG_AS_SHA1_NI
 asmlinkage void sha1_ni_transform(struct sha1_state *digest, const u8 *data,
 				  int rounds);
diff --git a/arch/x86/crypto/sha256-avx-asm.S b/arch/x86/crypto/sha256-avx-asm.S
index fcbc30f..4739cd3 100644
--- a/arch/x86/crypto/sha256-avx-asm.S
+++ b/arch/x86/crypto/sha256-avx-asm.S
@@ -47,7 +47,6 @@
 # This code schedules 1 block at a time, with 4 lanes per block
 ########################################################################
 
-#ifdef CONFIG_AS_AVX
 #include <linux/linkage.h>
 
 ## assume buffers not aligned
@@ -498,5 +497,3 @@
 # shuffle xDxC -> DC00
 _SHUF_DC00:
 	.octa 0x0b0a090803020100FFFFFFFFFFFFFFFF
-
-#endif
diff --git a/arch/x86/crypto/sha256-avx2-asm.S b/arch/x86/crypto/sha256-avx2-asm.S
index 499d9ec..11ff60c 100644
--- a/arch/x86/crypto/sha256-avx2-asm.S
+++ b/arch/x86/crypto/sha256-avx2-asm.S
@@ -48,7 +48,6 @@
 # This code schedules 2 blocks at a time, with 4 lanes per block
 ########################################################################
 
-#ifdef CONFIG_AS_AVX2
 #include <linux/linkage.h>
 
 ## assume buffers not aligned
@@ -767,5 +766,3 @@
 .align 32
 _SHUF_DC00:
 	.octa 0x0b0a090803020100FFFFFFFFFFFFFFFF,0x0b0a090803020100FFFFFFFFFFFFFFFF
-
-#endif
diff --git a/arch/x86/crypto/sha256_ssse3_glue.c b/arch/x86/crypto/sha256_ssse3_glue.c
index 03ad657..6394b5f 100644
--- a/arch/x86/crypto/sha256_ssse3_glue.c
+++ b/arch/x86/crypto/sha256_ssse3_glue.c
@@ -144,7 +144,6 @@ static void unregister_sha256_ssse3(void)
 				ARRAY_SIZE(sha256_ssse3_algs));
 }
 
-#ifdef CONFIG_AS_AVX
 asmlinkage void sha256_transform_avx(struct sha256_state *state,
 				     const u8 *data, int blocks);
 
@@ -221,12 +220,6 @@ static void unregister_sha256_avx(void)
 				ARRAY_SIZE(sha256_avx_algs));
 }
 
-#else
-static inline int register_sha256_avx(void) { return 0; }
-static inline void unregister_sha256_avx(void) { }
-#endif
-
-#if defined(CONFIG_AS_AVX2) && defined(CONFIG_AS_AVX)
 asmlinkage void sha256_transform_rorx(struct sha256_state *state,
 				      const u8 *data, int blocks);
 
@@ -301,11 +294,6 @@ static void unregister_sha256_avx2(void)
 				ARRAY_SIZE(sha256_avx2_algs));
 }
 
-#else
-static inline int register_sha256_avx2(void) { return 0; }
-static inline void unregister_sha256_avx2(void) { }
-#endif
-
 #ifdef CONFIG_AS_SHA256_NI
 asmlinkage void sha256_ni_transform(struct sha256_state *digest,
 				    const u8 *data, int rounds);
diff --git a/arch/x86/crypto/sha512-avx-asm.S b/arch/x86/crypto/sha512-avx-asm.S
index 90ea945..63470fd 100644
--- a/arch/x86/crypto/sha512-avx-asm.S
+++ b/arch/x86/crypto/sha512-avx-asm.S
@@ -47,7 +47,6 @@
 #
 ########################################################################
 
-#ifdef CONFIG_AS_AVX
 #include <linux/linkage.h>
 
 .text
@@ -424,4 +423,3 @@
 	.quad 0x3c9ebe0a15c9bebc,0x431d67c49c100d4c
 	.quad 0x4cc5d4becb3e42b6,0x597f299cfc657e2a
 	.quad 0x5fcb6fab3ad6faec,0x6c44198c4a475817
-#endif
diff --git a/arch/x86/crypto/sha512-avx2-asm.S b/arch/x86/crypto/sha512-avx2-asm.S
index 3dd886b..3a44bdc 100644
--- a/arch/x86/crypto/sha512-avx2-asm.S
+++ b/arch/x86/crypto/sha512-avx2-asm.S
@@ -49,7 +49,6 @@
 # This code schedules 1 blocks at a time, with 4 lanes per block
 ########################################################################
 
-#ifdef CONFIG_AS_AVX2
 #include <linux/linkage.h>
 
 .text
@@ -749,5 +748,3 @@
 MASK_YMM_LO:
 	.octa 0x00000000000000000000000000000000
 	.octa 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
-
-#endif
diff --git a/arch/x86/crypto/sha512_ssse3_glue.c b/arch/x86/crypto/sha512_ssse3_glue.c
index 1c444f4..82cc1b3 100644
--- a/arch/x86/crypto/sha512_ssse3_glue.c
+++ b/arch/x86/crypto/sha512_ssse3_glue.c
@@ -142,7 +142,6 @@ static void unregister_sha512_ssse3(void)
 			ARRAY_SIZE(sha512_ssse3_algs));
 }
 
-#ifdef CONFIG_AS_AVX
 asmlinkage void sha512_transform_avx(struct sha512_state *state,
 				     const u8 *data, int blocks);
 static bool avx_usable(void)
@@ -218,12 +217,7 @@ static void unregister_sha512_avx(void)
 		crypto_unregister_shashes(sha512_avx_algs,
 			ARRAY_SIZE(sha512_avx_algs));
 }
-#else
-static inline int register_sha512_avx(void) { return 0; }
-static inline void unregister_sha512_avx(void) { }
-#endif
 
-#if defined(CONFIG_AS_AVX2) && defined(CONFIG_AS_AVX)
 asmlinkage void sha512_transform_rorx(struct sha512_state *state,
 				      const u8 *data, int blocks);
 
@@ -298,10 +292,6 @@ static void unregister_sha512_avx2(void)
 		crypto_unregister_shashes(sha512_avx2_algs,
 			ARRAY_SIZE(sha512_avx2_algs));
 }
-#else
-static inline int register_sha512_avx2(void) { return 0; }
-static inline void unregister_sha512_avx2(void) { }
-#endif
 
 static int __init sha512_ssse3_mod_init(void)
 {
diff --git a/arch/x86/entry/vdso/.gitignore b/arch/x86/entry/vdso/.gitignore
index aae8ffd..37a6129 100644
--- a/arch/x86/entry/vdso/.gitignore
+++ b/arch/x86/entry/vdso/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 vdso.lds
 vdsox32.lds
 vdso32-syscall-syms.lds
diff --git a/arch/x86/entry/vdso/vdso32/.gitignore b/arch/x86/entry/vdso/vdso32/.gitignore
index e45fba9..5167384 100644
--- a/arch/x86/entry/vdso/vdso32/.gitignore
+++ b/arch/x86/entry/vdso/vdso32/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 vdso32.lds
diff --git a/arch/x86/entry/vdso/vdso32/vclock_gettime.c b/arch/x86/entry/vdso/vdso32/vclock_gettime.c
index 1e82bd4..84a4a73 100644
--- a/arch/x86/entry/vdso/vdso32/vclock_gettime.c
+++ b/arch/x86/entry/vdso/vdso32/vclock_gettime.c
@@ -1,10 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #define BUILD_VDSO32
 
-#ifndef CONFIG_CC_OPTIMIZE_FOR_SIZE
-#undef CONFIG_OPTIMIZE_INLINING
-#endif
-
 #ifdef CONFIG_X86_64
 
 /*
diff --git a/arch/x86/events/intel/uncore.c b/arch/x86/events/intel/uncore.c
index 1ba72c5..cf76d66 100644
--- a/arch/x86/events/intel/uncore.c
+++ b/arch/x86/events/intel/uncore.c
@@ -1476,6 +1476,12 @@ static const struct intel_uncore_init_fun tgl_l_uncore_init __initconst = {
 	.mmio_init = tgl_l_uncore_mmio_init,
 };
 
+static const struct intel_uncore_init_fun icx_uncore_init __initconst = {
+	.cpu_init = icx_uncore_cpu_init,
+	.pci_init = icx_uncore_pci_init,
+	.mmio_init = icx_uncore_mmio_init,
+};
+
 static const struct intel_uncore_init_fun snr_uncore_init __initconst = {
 	.cpu_init = snr_uncore_cpu_init,
 	.pci_init = snr_uncore_pci_init,
@@ -1511,6 +1517,8 @@ static const struct x86_cpu_id intel_uncore_match[] __initconst = {
 	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_L,		&icl_uncore_init),
 	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_NNPI,	&icl_uncore_init),
 	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE,		&icl_uncore_init),
+	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_D,		&icx_uncore_init),
+	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_X,		&icx_uncore_init),
 	X86_MATCH_INTEL_FAM6_MODEL(TIGERLAKE_L,		&tgl_l_uncore_init),
 	X86_MATCH_INTEL_FAM6_MODEL(TIGERLAKE,		&tgl_uncore_init),
 	X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT_D,	&snr_uncore_init),
diff --git a/arch/x86/events/intel/uncore.h b/arch/x86/events/intel/uncore.h
index b30429f..0da4a46 100644
--- a/arch/x86/events/intel/uncore.h
+++ b/arch/x86/events/intel/uncore.h
@@ -550,6 +550,9 @@ void skx_uncore_cpu_init(void);
 int snr_uncore_pci_init(void);
 void snr_uncore_cpu_init(void);
 void snr_uncore_mmio_init(void);
+int icx_uncore_pci_init(void);
+void icx_uncore_cpu_init(void);
+void icx_uncore_mmio_init(void);
 
 /* uncore_nhmex.c */
 void nhmex_uncore_cpu_init(void);
diff --git a/arch/x86/events/intel/uncore_snbep.c b/arch/x86/events/intel/uncore_snbep.c
index 01023f0..07652fa 100644
--- a/arch/x86/events/intel/uncore_snbep.c
+++ b/arch/x86/events/intel/uncore_snbep.c
@@ -382,6 +382,42 @@
 #define SNR_IMC_MMIO_MEM0_OFFSET		0xd8
 #define SNR_IMC_MMIO_MEM0_MASK			0x7FF
 
+/* ICX CHA */
+#define ICX_C34_MSR_PMON_CTR0			0xb68
+#define ICX_C34_MSR_PMON_CTL0			0xb61
+#define ICX_C34_MSR_PMON_BOX_CTL		0xb60
+#define ICX_C34_MSR_PMON_BOX_FILTER0		0xb65
+
+/* ICX IIO */
+#define ICX_IIO_MSR_PMON_CTL0			0xa58
+#define ICX_IIO_MSR_PMON_CTR0			0xa51
+#define ICX_IIO_MSR_PMON_BOX_CTL		0xa50
+
+/* ICX IRP */
+#define ICX_IRP0_MSR_PMON_CTL0			0xa4d
+#define ICX_IRP0_MSR_PMON_CTR0			0xa4b
+#define ICX_IRP0_MSR_PMON_BOX_CTL		0xa4a
+
+/* ICX M2PCIE */
+#define ICX_M2PCIE_MSR_PMON_CTL0		0xa46
+#define ICX_M2PCIE_MSR_PMON_CTR0		0xa41
+#define ICX_M2PCIE_MSR_PMON_BOX_CTL		0xa40
+
+/* ICX UPI */
+#define ICX_UPI_PCI_PMON_CTL0			0x350
+#define ICX_UPI_PCI_PMON_CTR0			0x320
+#define ICX_UPI_PCI_PMON_BOX_CTL		0x318
+#define ICX_UPI_CTL_UMASK_EXT			0xffffff
+
+/* ICX M3UPI*/
+#define ICX_M3UPI_PCI_PMON_CTL0			0xd8
+#define ICX_M3UPI_PCI_PMON_CTR0			0xa8
+#define ICX_M3UPI_PCI_PMON_BOX_CTL		0xa0
+
+/* ICX IMC */
+#define ICX_NUMBER_IMC_CHN			2
+#define ICX_IMC_MEM_STRIDE			0x4
+
 DEFINE_UNCORE_FORMAT_ATTR(event, event, "config:0-7");
 DEFINE_UNCORE_FORMAT_ATTR(event2, event, "config:0-6");
 DEFINE_UNCORE_FORMAT_ATTR(event_ext, event, "config:0-7,21");
@@ -390,6 +426,7 @@ DEFINE_UNCORE_FORMAT_ATTR(umask, umask, "config:8-15");
 DEFINE_UNCORE_FORMAT_ATTR(umask_ext, umask, "config:8-15,32-43,45-55");
 DEFINE_UNCORE_FORMAT_ATTR(umask_ext2, umask, "config:8-15,32-57");
 DEFINE_UNCORE_FORMAT_ATTR(umask_ext3, umask, "config:8-15,32-39");
+DEFINE_UNCORE_FORMAT_ATTR(umask_ext4, umask, "config:8-15,32-55");
 DEFINE_UNCORE_FORMAT_ATTR(qor, qor, "config:16");
 DEFINE_UNCORE_FORMAT_ATTR(edge, edge, "config:18");
 DEFINE_UNCORE_FORMAT_ATTR(tid_en, tid_en, "config:19");
@@ -4551,3 +4588,477 @@ void snr_uncore_mmio_init(void)
 }
 
 /* end of SNR uncore support */
+
+/* ICX uncore support */
+
+static unsigned icx_cha_msr_offsets[] = {
+	0x2a0, 0x2ae, 0x2bc, 0x2ca, 0x2d8, 0x2e6, 0x2f4, 0x302, 0x310,
+	0x31e, 0x32c, 0x33a, 0x348, 0x356, 0x364, 0x372, 0x380, 0x38e,
+	0x3aa, 0x3b8, 0x3c6, 0x3d4, 0x3e2, 0x3f0, 0x3fe, 0x40c, 0x41a,
+	0x428, 0x436, 0x444, 0x452, 0x460, 0x46e, 0x47c, 0x0,   0xe,
+	0x1c,  0x2a,  0x38,  0x46,
+};
+
+static int icx_cha_hw_config(struct intel_uncore_box *box, struct perf_event *event)
+{
+	struct hw_perf_event_extra *reg1 = &event->hw.extra_reg;
+	bool tie_en = !!(event->hw.config & SNBEP_CBO_PMON_CTL_TID_EN);
+
+	if (tie_en) {
+		reg1->reg = ICX_C34_MSR_PMON_BOX_FILTER0 +
+			    icx_cha_msr_offsets[box->pmu->pmu_idx];
+		reg1->config = event->attr.config1 & SKX_CHA_MSR_PMON_BOX_FILTER_TID;
+		reg1->idx = 0;
+	}
+
+	return 0;
+}
+
+static struct intel_uncore_ops icx_uncore_chabox_ops = {
+	.init_box		= ivbep_uncore_msr_init_box,
+	.disable_box		= snbep_uncore_msr_disable_box,
+	.enable_box		= snbep_uncore_msr_enable_box,
+	.disable_event		= snbep_uncore_msr_disable_event,
+	.enable_event		= snr_cha_enable_event,
+	.read_counter		= uncore_msr_read_counter,
+	.hw_config		= icx_cha_hw_config,
+};
+
+static struct intel_uncore_type icx_uncore_chabox = {
+	.name			= "cha",
+	.num_counters		= 4,
+	.perf_ctr_bits		= 48,
+	.event_ctl		= ICX_C34_MSR_PMON_CTL0,
+	.perf_ctr		= ICX_C34_MSR_PMON_CTR0,
+	.box_ctl		= ICX_C34_MSR_PMON_BOX_CTL,
+	.msr_offsets		= icx_cha_msr_offsets,
+	.event_mask		= HSWEP_S_MSR_PMON_RAW_EVENT_MASK,
+	.event_mask_ext		= SNR_CHA_RAW_EVENT_MASK_EXT,
+	.constraints		= skx_uncore_chabox_constraints,
+	.ops			= &icx_uncore_chabox_ops,
+	.format_group		= &snr_uncore_chabox_format_group,
+};
+
+static unsigned icx_msr_offsets[] = {
+	0x0, 0x20, 0x40, 0x90, 0xb0, 0xd0,
+};
+
+static struct event_constraint icx_uncore_iio_constraints[] = {
+	UNCORE_EVENT_CONSTRAINT(0x02, 0x3),
+	UNCORE_EVENT_CONSTRAINT(0x03, 0x3),
+	UNCORE_EVENT_CONSTRAINT(0x83, 0x3),
+	UNCORE_EVENT_CONSTRAINT(0xc0, 0xc),
+	UNCORE_EVENT_CONSTRAINT(0xc5, 0xc),
+	EVENT_CONSTRAINT_END
+};
+
+static struct intel_uncore_type icx_uncore_iio = {
+	.name			= "iio",
+	.num_counters		= 4,
+	.num_boxes		= 6,
+	.perf_ctr_bits		= 48,
+	.event_ctl		= ICX_IIO_MSR_PMON_CTL0,
+	.perf_ctr		= ICX_IIO_MSR_PMON_CTR0,
+	.event_mask		= SNBEP_PMON_RAW_EVENT_MASK,
+	.event_mask_ext		= SNR_IIO_PMON_RAW_EVENT_MASK_EXT,
+	.box_ctl		= ICX_IIO_MSR_PMON_BOX_CTL,
+	.msr_offsets		= icx_msr_offsets,
+	.constraints		= icx_uncore_iio_constraints,
+	.ops			= &skx_uncore_iio_ops,
+	.format_group		= &snr_uncore_iio_format_group,
+};
+
+static struct intel_uncore_type icx_uncore_irp = {
+	.name			= "irp",
+	.num_counters		= 2,
+	.num_boxes		= 6,
+	.perf_ctr_bits		= 48,
+	.event_ctl		= ICX_IRP0_MSR_PMON_CTL0,
+	.perf_ctr		= ICX_IRP0_MSR_PMON_CTR0,
+	.event_mask		= SNBEP_PMON_RAW_EVENT_MASK,
+	.box_ctl		= ICX_IRP0_MSR_PMON_BOX_CTL,
+	.msr_offsets		= icx_msr_offsets,
+	.ops			= &ivbep_uncore_msr_ops,
+	.format_group		= &ivbep_uncore_format_group,
+};
+
+static struct event_constraint icx_uncore_m2pcie_constraints[] = {
+	UNCORE_EVENT_CONSTRAINT(0x14, 0x3),
+	UNCORE_EVENT_CONSTRAINT(0x23, 0x3),
+	UNCORE_EVENT_CONSTRAINT(0x2d, 0x3),
+	EVENT_CONSTRAINT_END
+};
+
+static struct intel_uncore_type icx_uncore_m2pcie = {
+	.name		= "m2pcie",
+	.num_counters	= 4,
+	.num_boxes	= 6,
+	.perf_ctr_bits	= 48,
+	.event_ctl	= ICX_M2PCIE_MSR_PMON_CTL0,
+	.perf_ctr	= ICX_M2PCIE_MSR_PMON_CTR0,
+	.box_ctl	= ICX_M2PCIE_MSR_PMON_BOX_CTL,
+	.msr_offsets	= icx_msr_offsets,
+	.constraints	= icx_uncore_m2pcie_constraints,
+	.event_mask	= SNBEP_PMON_RAW_EVENT_MASK,
+	.ops		= &ivbep_uncore_msr_ops,
+	.format_group	= &ivbep_uncore_format_group,
+};
+
+enum perf_uncore_icx_iio_freerunning_type_id {
+	ICX_IIO_MSR_IOCLK,
+	ICX_IIO_MSR_BW_IN,
+
+	ICX_IIO_FREERUNNING_TYPE_MAX,
+};
+
+static unsigned icx_iio_clk_freerunning_box_offsets[] = {
+	0x0, 0x20, 0x40, 0x90, 0xb0, 0xd0,
+};
+
+static unsigned icx_iio_bw_freerunning_box_offsets[] = {
+	0x0, 0x10, 0x20, 0x90, 0xa0, 0xb0,
+};
+
+static struct freerunning_counters icx_iio_freerunning[] = {
+	[ICX_IIO_MSR_IOCLK]	= { 0xa55, 0x1, 0x20, 1, 48, icx_iio_clk_freerunning_box_offsets },
+	[ICX_IIO_MSR_BW_IN]	= { 0xaa0, 0x1, 0x10, 8, 48, icx_iio_bw_freerunning_box_offsets },
+};
+
+static struct uncore_event_desc icx_uncore_iio_freerunning_events[] = {
+	/* Free-Running IIO CLOCKS Counter */
+	INTEL_UNCORE_EVENT_DESC(ioclk,			"event=0xff,umask=0x10"),
+	/* Free-Running IIO BANDWIDTH IN Counters */
+	INTEL_UNCORE_EVENT_DESC(bw_in_port0,		"event=0xff,umask=0x20"),
+	INTEL_UNCORE_EVENT_DESC(bw_in_port0.scale,	"3.814697266e-6"),
+	INTEL_UNCORE_EVENT_DESC(bw_in_port0.unit,	"MiB"),
+	INTEL_UNCORE_EVENT_DESC(bw_in_port1,		"event=0xff,umask=0x21"),
+	INTEL_UNCORE_EVENT_DESC(bw_in_port1.scale,	"3.814697266e-6"),
+	INTEL_UNCORE_EVENT_DESC(bw_in_port1.unit,	"MiB"),
+	INTEL_UNCORE_EVENT_DESC(bw_in_port2,		"event=0xff,umask=0x22"),
+	INTEL_UNCORE_EVENT_DESC(bw_in_port2.scale,	"3.814697266e-6"),
+	INTEL_UNCORE_EVENT_DESC(bw_in_port2.unit,	"MiB"),
+	INTEL_UNCORE_EVENT_DESC(bw_in_port3,		"event=0xff,umask=0x23"),
+	INTEL_UNCORE_EVENT_DESC(bw_in_port3.scale,	"3.814697266e-6"),
+	INTEL_UNCORE_EVENT_DESC(bw_in_port3.unit,	"MiB"),
+	INTEL_UNCORE_EVENT_DESC(bw_in_port4,		"event=0xff,umask=0x24"),
+	INTEL_UNCORE_EVENT_DESC(bw_in_port4.scale,	"3.814697266e-6"),
+	INTEL_UNCORE_EVENT_DESC(bw_in_port4.unit,	"MiB"),
+	INTEL_UNCORE_EVENT_DESC(bw_in_port5,		"event=0xff,umask=0x25"),
+	INTEL_UNCORE_EVENT_DESC(bw_in_port5.scale,	"3.814697266e-6"),
+	INTEL_UNCORE_EVENT_DESC(bw_in_port5.unit,	"MiB"),
+	INTEL_UNCORE_EVENT_DESC(bw_in_port6,		"event=0xff,umask=0x26"),
+	INTEL_UNCORE_EVENT_DESC(bw_in_port6.scale,	"3.814697266e-6"),
+	INTEL_UNCORE_EVENT_DESC(bw_in_port6.unit,	"MiB"),
+	INTEL_UNCORE_EVENT_DESC(bw_in_port7,		"event=0xff,umask=0x27"),
+	INTEL_UNCORE_EVENT_DESC(bw_in_port7.scale,	"3.814697266e-6"),
+	INTEL_UNCORE_EVENT_DESC(bw_in_port7.unit,	"MiB"),
+	{ /* end: all zeroes */ },
+};
+
+static struct intel_uncore_type icx_uncore_iio_free_running = {
+	.name			= "iio_free_running",
+	.num_counters		= 9,
+	.num_boxes		= 6,
+	.num_freerunning_types	= ICX_IIO_FREERUNNING_TYPE_MAX,
+	.freerunning		= icx_iio_freerunning,
+	.ops			= &skx_uncore_iio_freerunning_ops,
+	.event_descs		= icx_uncore_iio_freerunning_events,
+	.format_group		= &skx_uncore_iio_freerunning_format_group,
+};
+
+static struct intel_uncore_type *icx_msr_uncores[] = {
+	&skx_uncore_ubox,
+	&icx_uncore_chabox,
+	&icx_uncore_iio,
+	&icx_uncore_irp,
+	&icx_uncore_m2pcie,
+	&skx_uncore_pcu,
+	&icx_uncore_iio_free_running,
+	NULL,
+};
+
+/*
+ * To determine the number of CHAs, it should read CAPID6(Low) and CAPID7 (High)
+ * registers which located at Device 30, Function 3
+ */
+#define ICX_CAPID6		0x9c
+#define ICX_CAPID7		0xa0
+
+static u64 icx_count_chabox(void)
+{
+	struct pci_dev *dev = NULL;
+	u64 caps = 0;
+
+	dev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x345b, dev);
+	if (!dev)
+		goto out;
+
+	pci_read_config_dword(dev, ICX_CAPID6, (u32 *)&caps);
+	pci_read_config_dword(dev, ICX_CAPID7, (u32 *)&caps + 1);
+out:
+	pci_dev_put(dev);
+	return hweight64(caps);
+}
+
+void icx_uncore_cpu_init(void)
+{
+	u64 num_boxes = icx_count_chabox();
+
+	if (WARN_ON(num_boxes > ARRAY_SIZE(icx_cha_msr_offsets)))
+		return;
+	icx_uncore_chabox.num_boxes = num_boxes;
+	uncore_msr_uncores = icx_msr_uncores;
+}
+
+static struct intel_uncore_type icx_uncore_m2m = {
+	.name		= "m2m",
+	.num_counters   = 4,
+	.num_boxes	= 4,
+	.perf_ctr_bits	= 48,
+	.perf_ctr	= SNR_M2M_PCI_PMON_CTR0,
+	.event_ctl	= SNR_M2M_PCI_PMON_CTL0,
+	.event_mask	= SNBEP_PMON_RAW_EVENT_MASK,
+	.box_ctl	= SNR_M2M_PCI_PMON_BOX_CTL,
+	.ops		= &snr_m2m_uncore_pci_ops,
+	.format_group	= &skx_uncore_format_group,
+};
+
+static struct attribute *icx_upi_uncore_formats_attr[] = {
+	&format_attr_event.attr,
+	&format_attr_umask_ext4.attr,
+	&format_attr_edge.attr,
+	&format_attr_inv.attr,
+	&format_attr_thresh8.attr,
+	NULL,
+};
+
+static const struct attribute_group icx_upi_uncore_format_group = {
+	.name = "format",
+	.attrs = icx_upi_uncore_formats_attr,
+};
+
+static struct intel_uncore_type icx_uncore_upi = {
+	.name		= "upi",
+	.num_counters   = 4,
+	.num_boxes	= 3,
+	.perf_ctr_bits	= 48,
+	.perf_ctr	= ICX_UPI_PCI_PMON_CTR0,
+	.event_ctl	= ICX_UPI_PCI_PMON_CTL0,
+	.event_mask	= SNBEP_PMON_RAW_EVENT_MASK,
+	.event_mask_ext = ICX_UPI_CTL_UMASK_EXT,
+	.box_ctl	= ICX_UPI_PCI_PMON_BOX_CTL,
+	.ops		= &skx_upi_uncore_pci_ops,
+	.format_group	= &icx_upi_uncore_format_group,
+};
+
+static struct event_constraint icx_uncore_m3upi_constraints[] = {
+	UNCORE_EVENT_CONSTRAINT(0x1c, 0x1),
+	UNCORE_EVENT_CONSTRAINT(0x1d, 0x1),
+	UNCORE_EVENT_CONSTRAINT(0x1e, 0x1),
+	UNCORE_EVENT_CONSTRAINT(0x1f, 0x1),
+	UNCORE_EVENT_CONSTRAINT(0x40, 0x7),
+	UNCORE_EVENT_CONSTRAINT(0x4e, 0x7),
+	UNCORE_EVENT_CONSTRAINT(0x4f, 0x7),
+	UNCORE_EVENT_CONSTRAINT(0x50, 0x7),
+	EVENT_CONSTRAINT_END
+};
+
+static struct intel_uncore_type icx_uncore_m3upi = {
+	.name		= "m3upi",
+	.num_counters   = 4,
+	.num_boxes	= 3,
+	.perf_ctr_bits	= 48,
+	.perf_ctr	= ICX_M3UPI_PCI_PMON_CTR0,
+	.event_ctl	= ICX_M3UPI_PCI_PMON_CTL0,
+	.event_mask	= SNBEP_PMON_RAW_EVENT_MASK,
+	.box_ctl	= ICX_M3UPI_PCI_PMON_BOX_CTL,
+	.constraints	= icx_uncore_m3upi_constraints,
+	.ops		= &ivbep_uncore_pci_ops,
+	.format_group	= &skx_uncore_format_group,
+};
+
+enum {
+	ICX_PCI_UNCORE_M2M,
+	ICX_PCI_UNCORE_UPI,
+	ICX_PCI_UNCORE_M3UPI,
+};
+
+static struct intel_uncore_type *icx_pci_uncores[] = {
+	[ICX_PCI_UNCORE_M2M]		= &icx_uncore_m2m,
+	[ICX_PCI_UNCORE_UPI]		= &icx_uncore_upi,
+	[ICX_PCI_UNCORE_M3UPI]		= &icx_uncore_m3upi,
+	NULL,
+};
+
+static const struct pci_device_id icx_uncore_pci_ids[] = {
+	{ /* M2M 0 */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x344a),
+		.driver_data = UNCORE_PCI_DEV_FULL_DATA(12, 0, ICX_PCI_UNCORE_M2M, 0),
+	},
+	{ /* M2M 1 */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x344a),
+		.driver_data = UNCORE_PCI_DEV_FULL_DATA(13, 0, ICX_PCI_UNCORE_M2M, 1),
+	},
+	{ /* M2M 2 */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x344a),
+		.driver_data = UNCORE_PCI_DEV_FULL_DATA(14, 0, ICX_PCI_UNCORE_M2M, 2),
+	},
+	{ /* M2M 3 */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x344a),
+		.driver_data = UNCORE_PCI_DEV_FULL_DATA(15, 0, ICX_PCI_UNCORE_M2M, 3),
+	},
+	{ /* UPI Link 0 */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x3441),
+		.driver_data = UNCORE_PCI_DEV_FULL_DATA(2, 1, ICX_PCI_UNCORE_UPI, 0),
+	},
+	{ /* UPI Link 1 */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x3441),
+		.driver_data = UNCORE_PCI_DEV_FULL_DATA(3, 1, ICX_PCI_UNCORE_UPI, 1),
+	},
+	{ /* UPI Link 2 */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x3441),
+		.driver_data = UNCORE_PCI_DEV_FULL_DATA(4, 1, ICX_PCI_UNCORE_UPI, 2),
+	},
+	{ /* M3UPI Link 0 */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x3446),
+		.driver_data = UNCORE_PCI_DEV_FULL_DATA(5, 1, ICX_PCI_UNCORE_M3UPI, 0),
+	},
+	{ /* M3UPI Link 1 */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x3446),
+		.driver_data = UNCORE_PCI_DEV_FULL_DATA(6, 1, ICX_PCI_UNCORE_M3UPI, 1),
+	},
+	{ /* M3UPI Link 2 */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x3446),
+		.driver_data = UNCORE_PCI_DEV_FULL_DATA(7, 1, ICX_PCI_UNCORE_M3UPI, 2),
+	},
+	{ /* end: all zeroes */ }
+};
+
+static struct pci_driver icx_uncore_pci_driver = {
+	.name		= "icx_uncore",
+	.id_table	= icx_uncore_pci_ids,
+};
+
+int icx_uncore_pci_init(void)
+{
+	/* ICX UBOX DID */
+	int ret = snbep_pci2phy_map_init(0x3450, SKX_CPUNODEID,
+					 SKX_GIDNIDMAP, true);
+
+	if (ret)
+		return ret;
+
+	uncore_pci_uncores = icx_pci_uncores;
+	uncore_pci_driver = &icx_uncore_pci_driver;
+	return 0;
+}
+
+static void icx_uncore_imc_init_box(struct intel_uncore_box *box)
+{
+	unsigned int box_ctl = box->pmu->type->box_ctl +
+			       box->pmu->type->mmio_offset * (box->pmu->pmu_idx % ICX_NUMBER_IMC_CHN);
+	int mem_offset = (box->pmu->pmu_idx / ICX_NUMBER_IMC_CHN) * ICX_IMC_MEM_STRIDE +
+			 SNR_IMC_MMIO_MEM0_OFFSET;
+
+	__snr_uncore_mmio_init_box(box, box_ctl, mem_offset);
+}
+
+static struct intel_uncore_ops icx_uncore_mmio_ops = {
+	.init_box	= icx_uncore_imc_init_box,
+	.exit_box	= uncore_mmio_exit_box,
+	.disable_box	= snr_uncore_mmio_disable_box,
+	.enable_box	= snr_uncore_mmio_enable_box,
+	.disable_event	= snr_uncore_mmio_disable_event,
+	.enable_event	= snr_uncore_mmio_enable_event,
+	.read_counter	= uncore_mmio_read_counter,
+};
+
+static struct intel_uncore_type icx_uncore_imc = {
+	.name		= "imc",
+	.num_counters   = 4,
+	.num_boxes	= 8,
+	.perf_ctr_bits	= 48,
+	.fixed_ctr_bits	= 48,
+	.fixed_ctr	= SNR_IMC_MMIO_PMON_FIXED_CTR,
+	.fixed_ctl	= SNR_IMC_MMIO_PMON_FIXED_CTL,
+	.event_descs	= hswep_uncore_imc_events,
+	.perf_ctr	= SNR_IMC_MMIO_PMON_CTR0,
+	.event_ctl	= SNR_IMC_MMIO_PMON_CTL0,
+	.event_mask	= SNBEP_PMON_RAW_EVENT_MASK,
+	.box_ctl	= SNR_IMC_MMIO_PMON_BOX_CTL,
+	.mmio_offset	= SNR_IMC_MMIO_OFFSET,
+	.ops		= &icx_uncore_mmio_ops,
+	.format_group	= &skx_uncore_format_group,
+};
+
+enum perf_uncore_icx_imc_freerunning_type_id {
+	ICX_IMC_DCLK,
+	ICX_IMC_DDR,
+	ICX_IMC_DDRT,
+
+	ICX_IMC_FREERUNNING_TYPE_MAX,
+};
+
+static struct freerunning_counters icx_imc_freerunning[] = {
+	[ICX_IMC_DCLK]	= { 0x22b0, 0x0, 0, 1, 48 },
+	[ICX_IMC_DDR]	= { 0x2290, 0x8, 0, 2, 48 },
+	[ICX_IMC_DDRT]	= { 0x22a0, 0x8, 0, 2, 48 },
+};
+
+static struct uncore_event_desc icx_uncore_imc_freerunning_events[] = {
+	INTEL_UNCORE_EVENT_DESC(dclk,			"event=0xff,umask=0x10"),
+
+	INTEL_UNCORE_EVENT_DESC(read,			"event=0xff,umask=0x20"),
+	INTEL_UNCORE_EVENT_DESC(read.scale,		"3.814697266e-6"),
+	INTEL_UNCORE_EVENT_DESC(read.unit,		"MiB"),
+	INTEL_UNCORE_EVENT_DESC(write,			"event=0xff,umask=0x21"),
+	INTEL_UNCORE_EVENT_DESC(write.scale,		"3.814697266e-6"),
+	INTEL_UNCORE_EVENT_DESC(write.unit,		"MiB"),
+
+	INTEL_UNCORE_EVENT_DESC(ddrt_read,		"event=0xff,umask=0x30"),
+	INTEL_UNCORE_EVENT_DESC(ddrt_read.scale,	"3.814697266e-6"),
+	INTEL_UNCORE_EVENT_DESC(ddrt_read.unit,		"MiB"),
+	INTEL_UNCORE_EVENT_DESC(ddrt_write,		"event=0xff,umask=0x31"),
+	INTEL_UNCORE_EVENT_DESC(ddrt_write.scale,	"3.814697266e-6"),
+	INTEL_UNCORE_EVENT_DESC(ddrt_write.unit,	"MiB"),
+	{ /* end: all zeroes */ },
+};
+
+static void icx_uncore_imc_freerunning_init_box(struct intel_uncore_box *box)
+{
+	int mem_offset = box->pmu->pmu_idx * ICX_IMC_MEM_STRIDE +
+			 SNR_IMC_MMIO_MEM0_OFFSET;
+
+	__snr_uncore_mmio_init_box(box, uncore_mmio_box_ctl(box), mem_offset);
+}
+
+static struct intel_uncore_ops icx_uncore_imc_freerunning_ops = {
+	.init_box	= icx_uncore_imc_freerunning_init_box,
+	.exit_box	= uncore_mmio_exit_box,
+	.read_counter	= uncore_mmio_read_counter,
+	.hw_config	= uncore_freerunning_hw_config,
+};
+
+static struct intel_uncore_type icx_uncore_imc_free_running = {
+	.name			= "imc_free_running",
+	.num_counters		= 5,
+	.num_boxes		= 4,
+	.num_freerunning_types	= ICX_IMC_FREERUNNING_TYPE_MAX,
+	.freerunning		= icx_imc_freerunning,
+	.ops			= &icx_uncore_imc_freerunning_ops,
+	.event_descs		= icx_uncore_imc_freerunning_events,
+	.format_group		= &skx_uncore_iio_freerunning_format_group,
+};
+
+static struct intel_uncore_type *icx_mmio_uncores[] = {
+	&icx_uncore_imc,
+	&icx_uncore_imc_free_running,
+	NULL,
+};
+
+void icx_uncore_mmio_init(void)
+{
+	uncore_mmio_uncores = icx_mmio_uncores;
+}
+
+/* end of ICX uncore support */
diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c
index b0da532..624f5d9 100644
--- a/arch/x86/hyperv/hv_init.c
+++ b/arch/x86/hyperv/hv_init.c
@@ -20,6 +20,7 @@
 #include <linux/mm.h>
 #include <linux/hyperv.h>
 #include <linux/slab.h>
+#include <linux/kernel.h>
 #include <linux/cpuhotplug.h>
 #include <linux/syscore_ops.h>
 #include <clocksource/hyperv_timer.h>
@@ -419,11 +420,14 @@ void hyperv_cleanup(void)
 }
 EXPORT_SYMBOL_GPL(hyperv_cleanup);
 
-void hyperv_report_panic(struct pt_regs *regs, long err)
+void hyperv_report_panic(struct pt_regs *regs, long err, bool in_die)
 {
 	static bool panic_reported;
 	u64 guest_id;
 
+	if (in_die && !panic_on_oops)
+		return;
+
 	/*
 	 * We prefer to report panic on 'die' chain as we have proper
 	 * registers to report, but if we miss it (e.g. on BUG()) we need
diff --git a/arch/x86/include/asm/cpu.h b/arch/x86/include/asm/cpu.h
index ff6f3ca..dd17c2d 100644
--- a/arch/x86/include/asm/cpu.h
+++ b/arch/x86/include/asm/cpu.h
@@ -44,6 +44,7 @@ unsigned int x86_stepping(unsigned int sig);
 extern void __init cpu_set_core_cap_bits(struct cpuinfo_x86 *c);
 extern void switch_to_sld(unsigned long tifn);
 extern bool handle_user_split_lock(struct pt_regs *regs, long error_code);
+extern bool handle_guest_split_lock(unsigned long ip);
 #else
 static inline void __init cpu_set_core_cap_bits(struct cpuinfo_x86 *c) {}
 static inline void switch_to_sld(unsigned long tifn) {}
@@ -51,5 +52,10 @@ static inline bool handle_user_split_lock(struct pt_regs *regs, long error_code)
 {
 	return false;
 }
+
+static inline bool handle_guest_split_lock(unsigned long ip)
+{
+	return false;
+}
 #endif
 #endif /* _ASM_X86_CPU_H */
diff --git a/arch/x86/include/asm/dwarf2.h b/arch/x86/include/asm/dwarf2.h
index f71a0cc..430fca1 100644
--- a/arch/x86/include/asm/dwarf2.h
+++ b/arch/x86/include/asm/dwarf2.h
@@ -6,15 +6,6 @@
 #warning "asm/dwarf2.h should be only included in pure assembly files"
 #endif
 
-/*
- * Macros for dwarf2 CFI unwind table entries.
- * See "as.info" for details on these pseudo ops. Unfortunately
- * they are only supported in very new binutils, so define them
- * away for older version.
- */
-
-#ifdef CONFIG_AS_CFI
-
 #define CFI_STARTPROC		.cfi_startproc
 #define CFI_ENDPROC		.cfi_endproc
 #define CFI_DEF_CFA		.cfi_def_cfa
@@ -30,13 +21,6 @@
 #define CFI_UNDEFINED		.cfi_undefined
 #define CFI_ESCAPE		.cfi_escape
 
-#ifdef CONFIG_AS_CFI_SIGNAL_FRAME
-#define CFI_SIGNAL_FRAME	.cfi_signal_frame
-#else
-#define CFI_SIGNAL_FRAME
-#endif
-
-#if defined(CONFIG_AS_CFI_SECTIONS) && defined(__ASSEMBLY__)
 #ifndef BUILD_VDSO
 	/*
 	 * Emit CFI data in .debug_frame sections, not .eh_frame sections.
@@ -53,33 +37,5 @@
 	  */
 	.cfi_sections .eh_frame, .debug_frame
 #endif
-#endif
-
-#else
-
-/*
- * Due to the structure of pre-exisiting code, don't use assembler line
- * comment character # to ignore the arguments. Instead, use a dummy macro.
- */
-.macro cfi_ignore a=0, b=0, c=0, d=0
-.endm
-
-#define CFI_STARTPROC		cfi_ignore
-#define CFI_ENDPROC		cfi_ignore
-#define CFI_DEF_CFA		cfi_ignore
-#define CFI_DEF_CFA_REGISTER	cfi_ignore
-#define CFI_DEF_CFA_OFFSET	cfi_ignore
-#define CFI_ADJUST_CFA_OFFSET	cfi_ignore
-#define CFI_OFFSET		cfi_ignore
-#define CFI_REL_OFFSET		cfi_ignore
-#define CFI_REGISTER		cfi_ignore
-#define CFI_RESTORE		cfi_ignore
-#define CFI_REMEMBER_STATE	cfi_ignore
-#define CFI_RESTORE_STATE	cfi_ignore
-#define CFI_UNDEFINED		cfi_ignore
-#define CFI_ESCAPE		cfi_ignore
-#define CFI_SIGNAL_FRAME	cfi_ignore
-
-#endif
 
 #endif /* _ASM_X86_DWARF2_H */
diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h
index cdcf48d..8391c11 100644
--- a/arch/x86/include/asm/efi.h
+++ b/arch/x86/include/asm/efi.h
@@ -178,8 +178,10 @@ extern void efi_free_boot_services(void);
 extern pgd_t * __init efi_uv1_memmap_phys_prolog(void);
 extern void __init efi_uv1_memmap_phys_epilog(pgd_t *save_pgd);
 
+/* kexec external ABI */
 struct efi_setup_data {
 	u64 fw_vendor;
+	u64 __unused;
 	u64 tables;
 	u64 smbios;
 	u64 reserved[8];
diff --git a/arch/x86/include/asm/hyperv-tlfs.h b/arch/x86/include/asm/hyperv-tlfs.h
index 92abc1e..2933657 100644
--- a/arch/x86/include/asm/hyperv-tlfs.h
+++ b/arch/x86/include/asm/hyperv-tlfs.h
@@ -376,6 +376,7 @@ struct hv_tsc_emulation_status {
 #define HVCALL_SEND_IPI_EX			0x0015
 #define HVCALL_POST_MESSAGE			0x005c
 #define HVCALL_SIGNAL_EVENT			0x005d
+#define HVCALL_RETARGET_INTERRUPT		0x007e
 #define HVCALL_FLUSH_GUEST_PHYSICAL_ADDRESS_SPACE 0x00af
 #define HVCALL_FLUSH_GUEST_PHYSICAL_ADDRESS_LIST 0x00b0
 
@@ -405,6 +406,8 @@ enum HV_GENERIC_SET_FORMAT {
 	HV_GENERIC_SET_ALL,
 };
 
+#define HV_PARTITION_ID_SELF                    ((u64)-1)
+
 #define HV_HYPERCALL_RESULT_MASK	GENMASK_ULL(15, 0)
 #define HV_HYPERCALL_FAST_BIT		BIT(16)
 #define HV_HYPERCALL_VARHEAD_OFFSET	17
@@ -909,4 +912,42 @@ struct hv_tlb_flush_ex {
 struct hv_partition_assist_pg {
 	u32 tlb_lock_count;
 };
+
+union hv_msi_entry {
+	u64 as_uint64;
+	struct {
+		u32 address;
+		u32 data;
+	} __packed;
+};
+
+struct hv_interrupt_entry {
+	u32 source;			/* 1 for MSI(-X) */
+	u32 reserved1;
+	union hv_msi_entry msi_entry;
+} __packed;
+
+/*
+ * flags for hv_device_interrupt_target.flags
+ */
+#define HV_DEVICE_INTERRUPT_TARGET_MULTICAST		1
+#define HV_DEVICE_INTERRUPT_TARGET_PROCESSOR_SET	2
+
+struct hv_device_interrupt_target {
+	u32 vector;
+	u32 flags;
+	union {
+		u64 vp_mask;
+		struct hv_vpset vp_set;
+	};
+} __packed;
+
+/* HvRetargetDeviceInterrupt hypercall */
+struct hv_retarget_device_interrupt {
+	u64 partition_id;		/* use "self" */
+	u64 device_id;
+	struct hv_interrupt_entry int_entry;
+	u64 reserved2;
+	struct hv_device_interrupt_target int_target;
+} __packed __aligned(8);
 #endif
diff --git a/arch/x86/include/asm/microcode_amd.h b/arch/x86/include/asm/microcode_amd.h
index 6685e12..7063b5a 100644
--- a/arch/x86/include/asm/microcode_amd.h
+++ b/arch/x86/include/asm/microcode_amd.h
@@ -41,7 +41,7 @@ struct microcode_amd {
 	unsigned int			mpb[0];
 };
 
-#define PATCH_MAX_SIZE PAGE_SIZE
+#define PATCH_MAX_SIZE (3 * PAGE_SIZE)
 
 #ifdef CONFIG_MICROCODE_AMD
 extern void __init load_ucode_amd_bsp(unsigned int family);
diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h
index edc2c58..1c42ecb 100644
--- a/arch/x86/include/asm/mshyperv.h
+++ b/arch/x86/include/asm/mshyperv.h
@@ -4,6 +4,7 @@
 
 #include <linux/types.h>
 #include <linux/nmi.h>
+#include <linux/msi.h>
 #include <asm/io.h>
 #include <asm/hyperv-tlfs.h>
 #include <asm/nospec-branch.h>
@@ -242,6 +243,13 @@ bool hv_vcpu_is_preempted(int vcpu);
 static inline void hv_apic_init(void) {}
 #endif
 
+static inline void hv_set_msi_entry_from_desc(union hv_msi_entry *msi_entry,
+					      struct msi_desc *msi_desc)
+{
+	msi_entry->address = msi_desc->msg.address_lo;
+	msi_entry->data = msi_desc->msg.data;
+}
+
 #else /* CONFIG_HYPERV */
 static inline void hyperv_init(void) {}
 static inline void hyperv_setup_mmu_ops(void) {}
diff --git a/arch/x86/include/asm/nospec-branch.h b/arch/x86/include/asm/nospec-branch.h
index 07e95dc..7e9a281 100644
--- a/arch/x86/include/asm/nospec-branch.h
+++ b/arch/x86/include/asm/nospec-branch.h
@@ -237,27 +237,6 @@ enum ssb_mitigation {
 extern char __indirect_thunk_start[];
 extern char __indirect_thunk_end[];
 
-/*
- * On VMEXIT we must ensure that no RSB predictions learned in the guest
- * can be followed in the host, by overwriting the RSB completely. Both
- * retpoline and IBRS mitigations for Spectre v2 need this; only on future
- * CPUs with IBRS_ALL *might* it be avoided.
- */
-static inline void vmexit_fill_RSB(void)
-{
-#ifdef CONFIG_RETPOLINE
-	unsigned long loops;
-
-	asm volatile (ANNOTATE_NOSPEC_ALTERNATIVE
-		      ALTERNATIVE("jmp 910f",
-				  __stringify(__FILL_RETURN_BUFFER(%0, RSB_CLEAR_LOOPS, %1)),
-				  X86_FEATURE_RETPOLINE)
-		      "910:"
-		      : "=r" (loops), ASM_CALL_CONSTRAINT
-		      : : "memory" );
-#endif
-}
-
 static __always_inline
 void alternative_msr_write(unsigned int msr, u64 val, unsigned int feature)
 {
diff --git a/arch/x86/include/asm/page_types.h b/arch/x86/include/asm/page_types.h
index c85e150..a506a41 100644
--- a/arch/x86/include/asm/page_types.h
+++ b/arch/x86/include/asm/page_types.h
@@ -35,9 +35,7 @@
 
 #define PAGE_OFFSET		((unsigned long)__PAGE_OFFSET)
 
-#define VM_DATA_DEFAULT_FLAGS \
-	(((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \
-	 VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+#define VM_DATA_DEFAULT_FLAGS	VM_DATA_FLAGS_TSK_EXEC
 
 #define __PHYSICAL_START	ALIGN(CONFIG_PHYSICAL_START, \
 				      CONFIG_PHYSICAL_ALIGN)
@@ -73,9 +71,6 @@ static inline phys_addr_t get_max_mapped(void)
 
 bool pfn_range_is_mapped(unsigned long start_pfn, unsigned long end_pfn);
 
-extern unsigned long init_memory_mapping(unsigned long start,
-					 unsigned long end);
-
 extern void initmem_init(void);
 
 #endif	/* !__ASSEMBLY__ */
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index afda66a..4d02e64 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -25,6 +25,7 @@
 #include <asm/x86_init.h>
 #include <asm/fpu/xstate.h>
 #include <asm/fpu/api.h>
+#include <asm-generic/pgtable_uffd.h>
 
 extern pgd_t early_top_pgt[PTRS_PER_PGD];
 int __init __early_make_pgtable(unsigned long address, pmdval_t pmd);
@@ -313,6 +314,23 @@ static inline pte_t pte_clear_flags(pte_t pte, pteval_t clear)
 	return native_make_pte(v & ~clear);
 }
 
+#ifdef CONFIG_HAVE_ARCH_USERFAULTFD_WP
+static inline int pte_uffd_wp(pte_t pte)
+{
+	return pte_flags(pte) & _PAGE_UFFD_WP;
+}
+
+static inline pte_t pte_mkuffd_wp(pte_t pte)
+{
+	return pte_set_flags(pte, _PAGE_UFFD_WP);
+}
+
+static inline pte_t pte_clear_uffd_wp(pte_t pte)
+{
+	return pte_clear_flags(pte, _PAGE_UFFD_WP);
+}
+#endif /* CONFIG_HAVE_ARCH_USERFAULTFD_WP */
+
 static inline pte_t pte_mkclean(pte_t pte)
 {
 	return pte_clear_flags(pte, _PAGE_DIRTY);
@@ -392,6 +410,23 @@ static inline pmd_t pmd_clear_flags(pmd_t pmd, pmdval_t clear)
 	return native_make_pmd(v & ~clear);
 }
 
+#ifdef CONFIG_HAVE_ARCH_USERFAULTFD_WP
+static inline int pmd_uffd_wp(pmd_t pmd)
+{
+	return pmd_flags(pmd) & _PAGE_UFFD_WP;
+}
+
+static inline pmd_t pmd_mkuffd_wp(pmd_t pmd)
+{
+	return pmd_set_flags(pmd, _PAGE_UFFD_WP);
+}
+
+static inline pmd_t pmd_clear_uffd_wp(pmd_t pmd)
+{
+	return pmd_clear_flags(pmd, _PAGE_UFFD_WP);
+}
+#endif /* CONFIG_HAVE_ARCH_USERFAULTFD_WP */
+
 static inline pmd_t pmd_mkold(pmd_t pmd)
 {
 	return pmd_clear_flags(pmd, _PAGE_ACCESSED);
@@ -825,7 +860,10 @@ static inline unsigned long pmd_index(unsigned long address)
  *
  * this function returns the index of the entry in the pte page which would
  * control the given virtual address
+ *
+ * Also define macro so we can test if pte_index is defined for arch.
  */
+#define pte_index pte_index
 static inline unsigned long pte_index(unsigned long address)
 {
 	return (address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1);
@@ -1043,6 +1081,9 @@ static inline void __meminit init_trampoline_default(void)
 
 void __init poking_init(void);
 
+unsigned long init_memory_mapping(unsigned long start,
+				  unsigned long end, pgprot_t prot);
+
 # ifdef CONFIG_RANDOMIZE_MEMORY
 void __meminit init_trampoline(void);
 # else
@@ -1374,6 +1415,38 @@ static inline pmd_t pmd_swp_clear_soft_dirty(pmd_t pmd)
 #endif
 #endif
 
+#ifdef CONFIG_HAVE_ARCH_USERFAULTFD_WP
+static inline pte_t pte_swp_mkuffd_wp(pte_t pte)
+{
+	return pte_set_flags(pte, _PAGE_SWP_UFFD_WP);
+}
+
+static inline int pte_swp_uffd_wp(pte_t pte)
+{
+	return pte_flags(pte) & _PAGE_SWP_UFFD_WP;
+}
+
+static inline pte_t pte_swp_clear_uffd_wp(pte_t pte)
+{
+	return pte_clear_flags(pte, _PAGE_SWP_UFFD_WP);
+}
+
+static inline pmd_t pmd_swp_mkuffd_wp(pmd_t pmd)
+{
+	return pmd_set_flags(pmd, _PAGE_SWP_UFFD_WP);
+}
+
+static inline int pmd_swp_uffd_wp(pmd_t pmd)
+{
+	return pmd_flags(pmd) & _PAGE_SWP_UFFD_WP;
+}
+
+static inline pmd_t pmd_swp_clear_uffd_wp(pmd_t pmd)
+{
+	return pmd_clear_flags(pmd, _PAGE_SWP_UFFD_WP);
+}
+#endif /* CONFIG_HAVE_ARCH_USERFAULTFD_WP */
+
 #define PKRU_AD_BIT 0x1
 #define PKRU_WD_BIT 0x2
 #define PKRU_BITS_PER_PKEY 2
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index 0b6c4042..df13734 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -189,7 +189,7 @@ extern void sync_global_pgds(unsigned long start, unsigned long end);
  *
  * |     ...            | 11| 10|  9|8|7|6|5| 4| 3|2| 1|0| <- bit number
  * |     ...            |SW3|SW2|SW1|G|L|D|A|CD|WT|U| W|P| <- bit names
- * | TYPE (59-63) | ~OFFSET (9-58)  |0|0|X|X| X| X|X|SD|0| <- swp entry
+ * | TYPE (59-63) | ~OFFSET (9-58)  |0|0|X|X| X| X|F|SD|0| <- swp entry
  *
  * G (8) is aliased and used as a PROT_NONE indicator for
  * !present ptes.  We need to start storing swap entries above
@@ -197,9 +197,15 @@ extern void sync_global_pgds(unsigned long start, unsigned long end);
  * erratum where they can be incorrectly set by hardware on
  * non-present PTEs.
  *
+ * SD Bits 1-4 are not used in non-present format and available for
+ * special use described below:
+ *
  * SD (1) in swp entry is used to store soft dirty bit, which helps us
  * remember soft dirty over page migration
  *
+ * F (2) in swp entry is used to record when a pagetable is
+ * writeprotected by userfaultfd WP support.
+ *
  * Bit 7 in swp entry should be 0 because pmd_present checks not only P,
  * but also L and G.
  *
diff --git a/arch/x86/include/asm/pgtable_types.h b/arch/x86/include/asm/pgtable_types.h
index 65c2ecd..b6606fe 100644
--- a/arch/x86/include/asm/pgtable_types.h
+++ b/arch/x86/include/asm/pgtable_types.h
@@ -32,6 +32,7 @@
 
 #define _PAGE_BIT_SPECIAL	_PAGE_BIT_SOFTW1
 #define _PAGE_BIT_CPA_TEST	_PAGE_BIT_SOFTW1
+#define _PAGE_BIT_UFFD_WP	_PAGE_BIT_SOFTW2 /* userfaultfd wrprotected */
 #define _PAGE_BIT_SOFT_DIRTY	_PAGE_BIT_SOFTW3 /* software dirty tracking */
 #define _PAGE_BIT_DEVMAP	_PAGE_BIT_SOFTW4
 
@@ -100,6 +101,14 @@
 #define _PAGE_SWP_SOFT_DIRTY	(_AT(pteval_t, 0))
 #endif
 
+#ifdef CONFIG_HAVE_ARCH_USERFAULTFD_WP
+#define _PAGE_UFFD_WP		(_AT(pteval_t, 1) << _PAGE_BIT_UFFD_WP)
+#define _PAGE_SWP_UFFD_WP	_PAGE_USER
+#else
+#define _PAGE_UFFD_WP		(_AT(pteval_t, 0))
+#define _PAGE_SWP_UFFD_WP	(_AT(pteval_t, 0))
+#endif
+
 #if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
 #define _PAGE_NX	(_AT(pteval_t, 1) << _PAGE_BIT_NX)
 #define _PAGE_DEVMAP	(_AT(u64, 1) << _PAGE_BIT_DEVMAP)
@@ -118,7 +127,8 @@
  */
 #define _PAGE_CHG_MASK	(PTE_PFN_MASK | _PAGE_PCD | _PAGE_PWT |		\
 			 _PAGE_SPECIAL | _PAGE_ACCESSED | _PAGE_DIRTY |	\
-			 _PAGE_SOFT_DIRTY | _PAGE_DEVMAP | _PAGE_ENC)
+			 _PAGE_SOFT_DIRTY | _PAGE_DEVMAP | _PAGE_ENC |  \
+			 _PAGE_UFFD_WP)
 #define _HPAGE_CHG_MASK (_PAGE_CHG_MASK | _PAGE_PSE)
 
 /*
diff --git a/arch/x86/include/asm/set_memory.h b/arch/x86/include/asm/set_memory.h
index 950532c..ec2c0a0 100644
--- a/arch/x86/include/asm/set_memory.h
+++ b/arch/x86/include/asm/set_memory.h
@@ -34,6 +34,7 @@
  * The caller is required to take care of these.
  */
 
+int __set_memory_prot(unsigned long addr, int numpages, pgprot_t prot);
 int _set_memory_uc(unsigned long addr, int numpages);
 int _set_memory_wc(unsigned long addr, int numpages);
 int _set_memory_wt(unsigned long addr, int numpages);
diff --git a/arch/x86/include/asm/xor_avx.h b/arch/x86/include/asm/xor_avx.h
index d61ddf3..0c4e5b5 100644
--- a/arch/x86/include/asm/xor_avx.h
+++ b/arch/x86/include/asm/xor_avx.h
@@ -11,8 +11,6 @@
  * Based on Ingo Molnar and Zach Brown's respective MMX and SSE routines
  */
 
-#ifdef CONFIG_AS_AVX
-
 #include <linux/compiler.h>
 #include <asm/fpu/api.h>
 
@@ -170,11 +168,4 @@ do { \
 #define AVX_SELECT(FASTEST) \
 	(boot_cpu_has(X86_FEATURE_AVX) && boot_cpu_has(X86_FEATURE_OSXSAVE) ? &xor_block_avx : FASTEST)
 
-#else
-
-#define AVX_XOR_SPEED {}
-
-#define AVX_SELECT(FASTEST) (FASTEST)
-
-#endif
 #endif
diff --git a/arch/x86/kernel/.gitignore b/arch/x86/kernel/.gitignore
index 08f4fd7..ef66569 100644
--- a/arch/x86/kernel/.gitignore
+++ b/arch/x86/kernel/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 vsyscall.lds
 vsyscall_32.lds
 vmlinux.lds
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 1ae5439..683ed9e 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -45,7 +45,7 @@ EXPORT_SYMBOL(acpi_disabled);
 #define PREFIX			"ACPI: "
 
 int acpi_noirq;				/* skip ACPI IRQ initialization */
-int acpi_nobgrt;			/* skip ACPI BGRT */
+static int acpi_nobgrt;			/* skip ACPI BGRT */
 int acpi_pci_disabled;		/* skip ACPI PCI scan and IRQ initialization */
 EXPORT_SYMBOL(acpi_pci_disabled);
 
diff --git a/arch/x86/kernel/acpi/cstate.c b/arch/x86/kernel/acpi/cstate.c
index caf2edc..49ae4e1 100644
--- a/arch/x86/kernel/acpi/cstate.c
+++ b/arch/x86/kernel/acpi/cstate.c
@@ -161,7 +161,8 @@ int acpi_processor_ffh_cstate_probe(unsigned int cpu,
 
 	/* Make sure we are running on right CPU */
 
-	retval = work_on_cpu(cpu, acpi_processor_ffh_cstate_probe_cpu, cx);
+	retval = call_on_cpu(cpu, acpi_processor_ffh_cstate_probe_cpu, cx,
+			     false);
 	if (retval == 0) {
 		/* Use the hint in CST */
 		percpu_entry->states[cx->index].eax = cx->address;
diff --git a/arch/x86/kernel/amd_gart_64.c b/arch/x86/kernel/amd_gart_64.c
index 4e5f502..16133819 100644
--- a/arch/x86/kernel/amd_gart_64.c
+++ b/arch/x86/kernel/amd_gart_64.c
@@ -744,7 +744,8 @@ int __init gart_iommu_init(void)
 
 	start_pfn = PFN_DOWN(aper_base);
 	if (!pfn_range_is_mapped(start_pfn, end_pfn))
-		init_memory_mapping(start_pfn<<PAGE_SHIFT, end_pfn<<PAGE_SHIFT);
+		init_memory_mapping(start_pfn<<PAGE_SHIFT, end_pfn<<PAGE_SHIFT,
+				    PAGE_KERNEL);
 
 	pr_info("PCI-DMA: using GART IOMMU.\n");
 	iommu_size = check_iommu_size(info.aper_base, aper_size);
diff --git a/arch/x86/kernel/cpu/.gitignore b/arch/x86/kernel/cpu/.gitignore
index 667df55..0bca7ef 100644
--- a/arch/x86/kernel/cpu/.gitignore
+++ b/arch/x86/kernel/cpu/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 capflags.c
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index 9a26e97..a19a680 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -21,6 +21,7 @@
 #include <asm/elf.h>
 #include <asm/cpu_device_id.h>
 #include <asm/cmdline.h>
+#include <asm/traps.h>
 
 #ifdef CONFIG_X86_64
 #include <linux/topology.h>
@@ -1066,13 +1067,10 @@ static void split_lock_init(void)
 	split_lock_verify_msr(sld_state != sld_off);
 }
 
-bool handle_user_split_lock(struct pt_regs *regs, long error_code)
+static void split_lock_warn(unsigned long ip)
 {
-	if ((regs->flags & X86_EFLAGS_AC) || sld_state == sld_fatal)
-		return false;
-
 	pr_warn_ratelimited("#AC: %s/%d took a split_lock trap at address: 0x%lx\n",
-			    current->comm, current->pid, regs->ip);
+			    current->comm, current->pid, ip);
 
 	/*
 	 * Disable the split lock detection for this task so it can make
@@ -1081,6 +1079,31 @@ bool handle_user_split_lock(struct pt_regs *regs, long error_code)
 	 */
 	sld_update_msr(false);
 	set_tsk_thread_flag(current, TIF_SLD);
+}
+
+bool handle_guest_split_lock(unsigned long ip)
+{
+	if (sld_state == sld_warn) {
+		split_lock_warn(ip);
+		return true;
+	}
+
+	pr_warn_once("#AC: %s/%d %s split_lock trap at address: 0x%lx\n",
+		     current->comm, current->pid,
+		     sld_state == sld_fatal ? "fatal" : "bogus", ip);
+
+	current->thread.error_code = 0;
+	current->thread.trap_nr = X86_TRAP_AC;
+	force_sig_fault(SIGBUS, BUS_ADRALN, NULL);
+	return false;
+}
+EXPORT_SYMBOL_GPL(handle_guest_split_lock);
+
+bool handle_user_split_lock(struct pt_regs *regs, long error_code)
+{
+	if ((regs->flags & X86_EFLAGS_AC) || sld_state == sld_fatal)
+		return false;
+	split_lock_warn(regs->ip);
 	return true;
 }
 
@@ -1096,35 +1119,53 @@ void switch_to_sld(unsigned long tifn)
 	sld_update_msr(!(tifn & _TIF_SLD));
 }
 
-#define SPLIT_LOCK_CPU(model) {X86_VENDOR_INTEL, 6, model, X86_FEATURE_ANY}
-
 /*
- * The following processors have the split lock detection feature. But
- * since they don't have the IA32_CORE_CAPABILITIES MSR, the feature cannot
- * be enumerated. Enable it by family and model matching on these
- * processors.
+ * Bits in the IA32_CORE_CAPABILITIES are not architectural, so they should
+ * only be trusted if it is confirmed that a CPU model implements a
+ * specific feature at a particular bit position.
+ *
+ * The possible driver data field values:
+ *
+ * - 0: CPU models that are known to have the per-core split-lock detection
+ *	feature even though they do not enumerate IA32_CORE_CAPABILITIES.
+ *
+ * - 1: CPU models which may enumerate IA32_CORE_CAPABILITIES and if so use
+ *      bit 5 to enumerate the per-core split-lock detection feature.
  */
 static const struct x86_cpu_id split_lock_cpu_ids[] __initconst = {
-	SPLIT_LOCK_CPU(INTEL_FAM6_ICELAKE_X),
-	SPLIT_LOCK_CPU(INTEL_FAM6_ICELAKE_L),
+	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_X,		0),
+	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_L,		0),
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT,	1),
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT_D,	1),
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT_L,	1),
 	{}
 };
 
 void __init cpu_set_core_cap_bits(struct cpuinfo_x86 *c)
 {
-	u64 ia32_core_caps = 0;
+	const struct x86_cpu_id *m;
+	u64 ia32_core_caps;
 
-	if (c->x86_vendor != X86_VENDOR_INTEL)
+	if (boot_cpu_has(X86_FEATURE_HYPERVISOR))
 		return;
-	if (cpu_has(c, X86_FEATURE_CORE_CAPABILITIES)) {
-		/* Enumerate features reported in IA32_CORE_CAPABILITIES MSR. */
+
+	m = x86_match_cpu(split_lock_cpu_ids);
+	if (!m)
+		return;
+
+	switch (m->driver_data) {
+	case 0:
+		break;
+	case 1:
+		if (!cpu_has(c, X86_FEATURE_CORE_CAPABILITIES))
+			return;
 		rdmsrl(MSR_IA32_CORE_CAPS, ia32_core_caps);
-	} else if (!boot_cpu_has(X86_FEATURE_HYPERVISOR)) {
-		/* Enumerate split lock detection by family and model. */
-		if (x86_match_cpu(split_lock_cpu_ids))
-			ia32_core_caps |= MSR_IA32_CORE_CAPS_SPLIT_LOCK_DETECT;
+		if (!(ia32_core_caps & MSR_IA32_CORE_CAPS_SPLIT_LOCK_DETECT))
+			return;
+		break;
+	default:
+		return;
 	}
 
-	if (ia32_core_caps & MSR_IA32_CORE_CAPS_SPLIT_LOCK_DETECT)
-		split_lock_setup();
+	split_lock_setup();
 }
diff --git a/arch/x86/kernel/cpu/mshyperv.c b/arch/x86/kernel/cpu/mshyperv.c
index caa032c..ebf34c7 100644
--- a/arch/x86/kernel/cpu/mshyperv.c
+++ b/arch/x86/kernel/cpu/mshyperv.c
@@ -227,8 +227,8 @@ static void __init ms_hyperv_init_platform(void)
 	ms_hyperv.misc_features = cpuid_edx(HYPERV_CPUID_FEATURES);
 	ms_hyperv.hints    = cpuid_eax(HYPERV_CPUID_ENLIGHTMENT_INFO);
 
-	pr_info("Hyper-V: features 0x%x, hints 0x%x\n",
-		ms_hyperv.features, ms_hyperv.hints);
+	pr_info("Hyper-V: features 0x%x, hints 0x%x, misc 0x%x\n",
+		ms_hyperv.features, ms_hyperv.hints, ms_hyperv.misc_features);
 
 	ms_hyperv.max_vp_index = cpuid_eax(HYPERV_CPUID_IMPLEMENT_LIMITS);
 	ms_hyperv.max_lp_index = cpuid_ebx(HYPERV_CPUID_IMPLEMENT_LIMITS);
@@ -263,6 +263,16 @@ static void __init ms_hyperv_init_platform(void)
 			cpuid_eax(HYPERV_CPUID_NESTED_FEATURES);
 	}
 
+	/*
+	 * Hyper-V expects to get crash register data or kmsg when
+	 * crash enlightment is available and system crashes. Set
+	 * crash_kexec_post_notifiers to be true to make sure that
+	 * calling crash enlightment interface before running kdump
+	 * kernel.
+	 */
+	if (ms_hyperv.misc_features & HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE)
+		crash_kexec_post_notifiers = true;
+
 #ifdef CONFIG_X86_LOCAL_APIC
 	if (ms_hyperv.features & HV_X64_ACCESS_FREQUENCY_MSRS &&
 	    ms_hyperv.misc_features & HV_FEATURE_FREQUENCY_MSRS_AVAILABLE) {
diff --git a/arch/x86/kernel/cpu/resctrl/core.c b/arch/x86/kernel/cpu/resctrl/core.c
index 89049b3..d8cc522 100644
--- a/arch/x86/kernel/cpu/resctrl/core.c
+++ b/arch/x86/kernel/cpu/resctrl/core.c
@@ -578,6 +578,8 @@ static void domain_add_cpu(int cpu, struct rdt_resource *r)
 	d->id = id;
 	cpumask_set_cpu(cpu, &d->cpu_mask);
 
+	rdt_domain_reconfigure_cdp(r);
+
 	if (r->alloc_capable && domain_setup_ctrlval(r, d)) {
 		kfree(d);
 		return;
diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h
index 181c992..3dd13f3 100644
--- a/arch/x86/kernel/cpu/resctrl/internal.h
+++ b/arch/x86/kernel/cpu/resctrl/internal.h
@@ -601,5 +601,6 @@ bool has_busy_rmid(struct rdt_resource *r, struct rdt_domain *d);
 void __check_limbo(struct rdt_domain *d, bool force_free);
 bool cbm_validate_intel(char *buf, u32 *data, struct rdt_resource *r);
 bool cbm_validate_amd(char *buf, u32 *data, struct rdt_resource *r);
+void rdt_domain_reconfigure_cdp(struct rdt_resource *r);
 
 #endif /* _ASM_X86_RESCTRL_INTERNAL_H */
diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index 064e9ef..5a359d9 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -1859,6 +1859,19 @@ static int set_cache_qos_cfg(int level, bool enable)
 	return 0;
 }
 
+/* Restore the qos cfg state when a domain comes online */
+void rdt_domain_reconfigure_cdp(struct rdt_resource *r)
+{
+	if (!r->alloc_capable)
+		return;
+
+	if (r == &rdt_resources_all[RDT_RESOURCE_L2DATA])
+		l2_qos_cfg_update(&r->alloc_enabled);
+
+	if (r == &rdt_resources_all[RDT_RESOURCE_L3DATA])
+		l3_qos_cfg_update(&r->alloc_enabled);
+}
+
 /*
  * Enable or disable the MBA software controller
  * which helps user specify bandwidth in MBps.
@@ -3072,7 +3085,8 @@ static int rdtgroup_rmdir(struct kernfs_node *kn)
 	 * If the rdtgroup is a mon group and parent directory
 	 * is a valid "mon_groups" directory, remove the mon group.
 	 */
-	if (rdtgrp->type == RDTCTRL_GROUP && parent_kn == rdtgroup_default.kn) {
+	if (rdtgrp->type == RDTCTRL_GROUP && parent_kn == rdtgroup_default.kn &&
+	    rdtgrp != &rdtgroup_default) {
 		if (rdtgrp->mode == RDT_MODE_PSEUDO_LOCKSETUP ||
 		    rdtgrp->mode == RDT_MODE_PSEUDO_LOCKED) {
 			ret = rdtgroup_ctrl_remove(kn, rdtgrp);
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index e6b5450..4b3fa6c 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -16,6 +16,7 @@
 #include <linux/pci.h>
 #include <linux/root_dev.h>
 #include <linux/sfi.h>
+#include <linux/hugetlb.h>
 #include <linux/tboot.h>
 #include <linux/usb/xhci-dbgp.h>
 
@@ -1157,6 +1158,9 @@ void __init setup_arch(char **cmdline_p)
 	initmem_init();
 	dma_contiguous_reserve(max_pfn_mapped << PAGE_SHIFT);
 
+	if (boot_cpu_has(X86_FEATURE_GBPAGES))
+		hugetlb_cma_reserve(PUD_SHIFT - PAGE_SHIFT);
+
 	/*
 	 * Reserve memory for crash kernel after SRAT is parsed so that it
 	 * won't consume hotpluggable memory.
diff --git a/arch/x86/kernel/umip.c b/arch/x86/kernel/umip.c
index 4d732a4..8d5cbe1 100644
--- a/arch/x86/kernel/umip.c
+++ b/arch/x86/kernel/umip.c
@@ -81,7 +81,7 @@
 #define	UMIP_INST_SLDT  3       /* 0F 00 /0 */
 #define	UMIP_INST_STR   4       /* 0F 00 /1 */
 
-const char * const umip_insns[5] = {
+static const char * const umip_insns[5] = {
 	[UMIP_INST_SGDT] = "SGDT",
 	[UMIP_INST_SIDT] = "SIDT",
 	[UMIP_INST_SMSW] = "SMSW",
diff --git a/arch/x86/kvm/Kconfig b/arch/x86/kvm/Kconfig
index 9fea075..d8154e0 100644
--- a/arch/x86/kvm/Kconfig
+++ b/arch/x86/kvm/Kconfig
@@ -107,8 +107,4 @@
 	 This option adds a R/W kVM module parameter 'mmu_audit', which allows
 	 auditing of KVM MMU events at runtime.
 
-# OK, it's a little counter-intuitive to do this, but it puts it neatly under
-# the virtualization menu.
-source "drivers/vhost/Kconfig"
-
 endif # VIRTUALIZATION
diff --git a/arch/x86/kvm/Makefile b/arch/x86/kvm/Makefile
index a789759..4a3081e 100644
--- a/arch/x86/kvm/Makefile
+++ b/arch/x86/kvm/Makefile
@@ -3,6 +3,10 @@
 ccflags-y += -Iarch/x86/kvm
 ccflags-$(CONFIG_KVM_WERROR) += -Werror
 
+ifeq ($(CONFIG_FRAME_POINTER),y)
+OBJECT_FILES_NON_STANDARD_vmenter.o := y
+endif
+
 KVM := ../../../virt/kvm
 
 kvm-y			+= $(KVM)/kvm_main.o $(KVM)/coalesced_mmio.o \
diff --git a/arch/x86/kvm/svm/sev.c b/arch/x86/kvm/svm/sev.c
index 0e3fc31..cf912b4 100644
--- a/arch/x86/kvm/svm/sev.c
+++ b/arch/x86/kvm/svm/sev.c
@@ -12,6 +12,7 @@
 #include <linux/kernel.h>
 #include <linux/highmem.h>
 #include <linux/psp-sev.h>
+#include <linux/pagemap.h>
 #include <linux/swap.h>
 
 #include "x86.h"
@@ -1117,7 +1118,7 @@ int __init sev_hardware_setup(void)
 	/* Maximum number of encrypted guests supported simultaneously */
 	max_sev_asid = cpuid_ecx(0x8000001F);
 
-	if (!max_sev_asid)
+	if (!svm_sev_enabled())
 		return 1;
 
 	/* Minimum ASID value that should be used for SEV guest */
@@ -1156,6 +1157,9 @@ int __init sev_hardware_setup(void)
 
 void sev_hardware_teardown(void)
 {
+	if (!svm_sev_enabled())
+		return;
+
 	bitmap_free(sev_asid_bitmap);
 	bitmap_free(sev_reclaim_asid_bitmap);
 
diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
index 2be5bba..2f379ba 100644
--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -3276,7 +3276,7 @@ static void svm_cancel_injection(struct kvm_vcpu *vcpu)
 	svm_complete_interrupts(svm);
 }
 
-bool __svm_vcpu_run(unsigned long vmcb_pa, unsigned long *regs);
+void __svm_vcpu_run(unsigned long vmcb_pa, unsigned long *regs);
 
 static void svm_vcpu_run(struct kvm_vcpu *vcpu)
 {
@@ -3330,13 +3330,8 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu)
 	 */
 	x86_spec_ctrl_set_guest(svm->spec_ctrl, svm->virt_spec_ctrl);
 
-	local_irq_enable();
-
 	__svm_vcpu_run(svm->vmcb_pa, (unsigned long *)&svm->vcpu.arch.regs);
 
-	/* Eliminate branch target predictions from guest mode */
-	vmexit_fill_RSB();
-
 #ifdef CONFIG_X86_64
 	wrmsrl(MSR_GS_BASE, svm->host.gs_base);
 #else
@@ -3366,8 +3361,6 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu)
 
 	reload_tss(vcpu);
 
-	local_irq_disable();
-
 	x86_spec_ctrl_restore_host(svm->spec_ctrl, svm->virt_spec_ctrl);
 
 	vcpu->arch.cr2 = svm->vmcb->save.cr2;
@@ -3411,7 +3404,6 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu)
 
 	mark_all_clean(svm->vmcb);
 }
-STACK_FRAME_NON_STANDARD(svm_vcpu_run);
 
 static void svm_load_mmu_pgd(struct kvm_vcpu *vcpu, unsigned long root)
 {
diff --git a/arch/x86/kvm/svm/vmenter.S b/arch/x86/kvm/svm/vmenter.S
index fa1af90..bf94433 100644
--- a/arch/x86/kvm/svm/vmenter.S
+++ b/arch/x86/kvm/svm/vmenter.S
@@ -3,6 +3,7 @@
 #include <asm/asm.h>
 #include <asm/bitsperlong.h>
 #include <asm/kvm_vcpu_regs.h>
+#include <asm/nospec-branch.h>
 
 #define WORD_SIZE (BITS_PER_LONG / 8)
 
@@ -35,7 +36,6 @@
  */
 SYM_FUNC_START(__svm_vcpu_run)
 	push %_ASM_BP
-	mov  %_ASM_SP, %_ASM_BP
 #ifdef CONFIG_X86_64
 	push %r15
 	push %r14
@@ -78,6 +78,7 @@
 	pop %_ASM_AX
 
 	/* Enter guest mode */
+	sti
 1:	vmload %_ASM_AX
 	jmp 3f
 2:	cmpb $0, kvm_rebooting
@@ -99,6 +100,13 @@
 	ud2
 	_ASM_EXTABLE(5b, 6b)
 7:
+	cli
+
+#ifdef CONFIG_RETPOLINE
+	/* IMPORTANT: Stuff the RSB immediately after VM-Exit, before RET! */
+	FILL_RETURN_BUFFER %_ASM_AX, RSB_CLEAR_LOOPS, X86_FEATURE_RETPOLINE
+#endif
+
 	/* "POP" @regs to RAX. */
 	pop %_ASM_AX
 
diff --git a/arch/x86/kvm/vmx/nested.c b/arch/x86/kvm/vmx/nested.c
index cbc9ea2..fd78ffb 100644
--- a/arch/x86/kvm/vmx/nested.c
+++ b/arch/x86/kvm/vmx/nested.c
@@ -5533,8 +5533,25 @@ static bool nested_vmx_exit_handled_vmcs_access(struct kvm_vcpu *vcpu,
 	return 1 & (b >> (field & 7));
 }
 
+static bool nested_vmx_exit_handled_mtf(struct vmcs12 *vmcs12)
+{
+	u32 entry_intr_info = vmcs12->vm_entry_intr_info_field;
+
+	if (nested_cpu_has_mtf(vmcs12))
+		return true;
+
+	/*
+	 * An MTF VM-exit may be injected into the guest by setting the
+	 * interruption-type to 7 (other event) and the vector field to 0. Such
+	 * is the case regardless of the 'monitor trap flag' VM-execution
+	 * control.
+	 */
+	return entry_intr_info == (INTR_INFO_VALID_MASK
+				   | INTR_TYPE_OTHER_EVENT);
+}
+
 /*
- * Return 1 if we should exit from L2 to L1 to handle an exit, or 0 if we
+ * Return true if we should exit from L2 to L1 to handle an exit, or false if we
  * should handle it ourselves in L0 (and then continue L2). Only call this
  * when in is_guest_mode (L2).
  */
@@ -5633,7 +5650,7 @@ bool nested_vmx_exit_reflected(struct kvm_vcpu *vcpu, u32 exit_reason)
 	case EXIT_REASON_MWAIT_INSTRUCTION:
 		return nested_cpu_has(vmcs12, CPU_BASED_MWAIT_EXITING);
 	case EXIT_REASON_MONITOR_TRAP_FLAG:
-		return nested_cpu_has_mtf(vmcs12);
+		return nested_vmx_exit_handled_mtf(vmcs12);
 	case EXIT_REASON_MONITOR_INSTRUCTION:
 		return nested_cpu_has(vmcs12, CPU_BASED_MONITOR_EXITING);
 	case EXIT_REASON_PAUSE_INSTRUCTION:
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index 8959514..c2c6335 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -4572,7 +4572,7 @@ static int handle_rmode_exception(struct kvm_vcpu *vcpu,
  */
 static void kvm_machine_check(void)
 {
-#if defined(CONFIG_X86_MCE) && defined(CONFIG_X86_64)
+#if defined(CONFIG_X86_MCE)
 	struct pt_regs regs = {
 		.cs = 3, /* Fake ring 3 no matter what the guest ran on */
 		.flags = X86_EFLAGS_IF,
@@ -4588,6 +4588,26 @@ static int handle_machine_check(struct kvm_vcpu *vcpu)
 	return 1;
 }
 
+/*
+ * If the host has split lock detection disabled, then #AC is
+ * unconditionally injected into the guest, which is the pre split lock
+ * detection behaviour.
+ *
+ * If the host has split lock detection enabled then #AC is
+ * only injected into the guest when:
+ *  - Guest CPL == 3 (user mode)
+ *  - Guest has #AC detection enabled in CR0
+ *  - Guest EFLAGS has AC bit set
+ */
+static inline bool guest_inject_ac(struct kvm_vcpu *vcpu)
+{
+	if (!boot_cpu_has(X86_FEATURE_SPLIT_LOCK_DETECT))
+		return true;
+
+	return vmx_get_cpl(vcpu) == 3 && kvm_read_cr0_bits(vcpu, X86_CR0_AM) &&
+	       (kvm_get_rflags(vcpu) & X86_EFLAGS_AC);
+}
+
 static int handle_exception_nmi(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
@@ -4653,9 +4673,6 @@ static int handle_exception_nmi(struct kvm_vcpu *vcpu)
 		return handle_rmode_exception(vcpu, ex_no, error_code);
 
 	switch (ex_no) {
-	case AC_VECTOR:
-		kvm_queue_exception_e(vcpu, AC_VECTOR, error_code);
-		return 1;
 	case DB_VECTOR:
 		dr6 = vmcs_readl(EXIT_QUALIFICATION);
 		if (!(vcpu->guest_debug &
@@ -4684,6 +4701,20 @@ static int handle_exception_nmi(struct kvm_vcpu *vcpu)
 		kvm_run->debug.arch.pc = vmcs_readl(GUEST_CS_BASE) + rip;
 		kvm_run->debug.arch.exception = ex_no;
 		break;
+	case AC_VECTOR:
+		if (guest_inject_ac(vcpu)) {
+			kvm_queue_exception_e(vcpu, AC_VECTOR, error_code);
+			return 1;
+		}
+
+		/*
+		 * Handle split lock. Depending on detection mode this will
+		 * either warn and disable split lock detection for this
+		 * task or force SIGBUS on it.
+		 */
+		if (handle_guest_split_lock(kvm_rip_read(vcpu)))
+			return 1;
+		fallthrough;
 	default:
 		kvm_run->exit_reason = KVM_EXIT_EXCEPTION;
 		kvm_run->ex.exception = ex_no;
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 027dfd2..c5835f9 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -3060,6 +3060,17 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 	case MSR_IA32_PERF_CTL:
 	case MSR_AMD64_DC_CFG:
 	case MSR_F15H_EX_CFG:
+	/*
+	 * Intel Sandy Bridge CPUs must support the RAPL (running average power
+	 * limit) MSRs. Just return 0, as we do not want to expose the host
+	 * data here. Do not conditionalize this on CPUID, as KVM does not do
+	 * so for existing CPU-specific MSRs.
+	 */
+	case MSR_RAPL_POWER_UNIT:
+	case MSR_PP0_ENERGY_STATUS:	/* Power plane 0 (core) */
+	case MSR_PP1_ENERGY_STATUS:	/* Power plane 1 (graphics uncore) */
+	case MSR_PKG_ENERGY_STATUS:	/* Total package */
+	case MSR_DRAM_ENERGY_STATUS:	/* DRAM controller */
 		msr_info->data = 0;
 		break;
 	case MSR_F15H_PERF_CTL0 ... MSR_F15H_PERF_CTR5:
@@ -5049,10 +5060,13 @@ long kvm_arch_vm_ioctl(struct file *filp,
 		r = -EFAULT;
 		if (copy_from_user(&u.ps, argp, sizeof(u.ps)))
 			goto out;
+		mutex_lock(&kvm->lock);
 		r = -ENXIO;
 		if (!kvm->arch.vpit)
-			goto out;
+			goto set_pit_out;
 		r = kvm_vm_ioctl_set_pit(kvm, &u.ps);
+set_pit_out:
+		mutex_unlock(&kvm->lock);
 		break;
 	}
 	case KVM_GET_PIT2: {
@@ -5072,10 +5086,13 @@ long kvm_arch_vm_ioctl(struct file *filp,
 		r = -EFAULT;
 		if (copy_from_user(&u.ps2, argp, sizeof(u.ps2)))
 			goto out;
+		mutex_lock(&kvm->lock);
 		r = -ENXIO;
 		if (!kvm->arch.vpit)
-			goto out;
+			goto set_pit2_out;
 		r = kvm_vm_ioctl_set_pit2(kvm, &u.ps2);
+set_pit2_out:
+		mutex_unlock(&kvm->lock);
 		break;
 	}
 	case KVM_REINJECT_CONTROL: {
@@ -5839,6 +5856,7 @@ static int emulator_cmpxchg_emulated(struct x86_emulate_ctxt *ctxt,
 {
 	struct kvm_host_map map;
 	struct kvm_vcpu *vcpu = emul_to_vcpu(ctxt);
+	u64 page_line_mask;
 	gpa_t gpa;
 	char *kaddr;
 	bool exchanged;
@@ -5853,7 +5871,16 @@ static int emulator_cmpxchg_emulated(struct x86_emulate_ctxt *ctxt,
 	    (gpa & PAGE_MASK) == APIC_DEFAULT_PHYS_BASE)
 		goto emul_write;
 
-	if (((gpa + bytes - 1) & PAGE_MASK) != (gpa & PAGE_MASK))
+	/*
+	 * Emulate the atomic as a straight write to avoid #AC if SLD is
+	 * enabled in the host and the access splits a cache line.
+	 */
+	if (boot_cpu_has(X86_FEATURE_SPLIT_LOCK_DETECT))
+		page_line_mask = ~(cache_line_size() - 1);
+	else
+		page_line_mask = PAGE_MASK;
+
+	if (((gpa + bytes - 1) & page_line_mask) != (gpa & page_line_mask))
 		goto emul_write;
 
 	if (kvm_vcpu_map(vcpu, gpa_to_gfn(gpa), &map))
diff --git a/arch/x86/lib/.gitignore b/arch/x86/lib/.gitignore
index 8df89f0..8ae0f93 100644
--- a/arch/x86/lib/.gitignore
+++ b/arch/x86/lib/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 inat-tables.c
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 859519f..a51df51 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -1222,7 +1222,7 @@ access_error(unsigned long error_code, struct vm_area_struct *vma)
 		return 1;
 
 	/* read, not present: */
-	if (unlikely(!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE))))
+	if (unlikely(!vma_is_accessible(vma)))
 		return 1;
 
 	return 0;
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index e7bb483..1bba16c 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -467,7 +467,7 @@ bool pfn_range_is_mapped(unsigned long start_pfn, unsigned long end_pfn)
  * the physical memory. To access them they are temporarily mapped.
  */
 unsigned long __ref init_memory_mapping(unsigned long start,
-					       unsigned long end)
+					unsigned long end, pgprot_t prot)
 {
 	struct map_range mr[NR_RANGE_MR];
 	unsigned long ret = 0;
@@ -481,7 +481,8 @@ unsigned long __ref init_memory_mapping(unsigned long start,
 
 	for (i = 0; i < nr_range; i++)
 		ret = kernel_physical_mapping_init(mr[i].start, mr[i].end,
-						   mr[i].page_size_mask);
+						   mr[i].page_size_mask,
+						   prot);
 
 	add_pfn_range_mapped(start >> PAGE_SHIFT, ret >> PAGE_SHIFT);
 
@@ -521,7 +522,7 @@ static unsigned long __init init_range_memory_mapping(
 		 */
 		can_use_brk_pgt = max(start, (u64)pgt_buf_end<<PAGE_SHIFT) >=
 				    min(end, (u64)pgt_buf_top<<PAGE_SHIFT);
-		init_memory_mapping(start, end);
+		init_memory_mapping(start, end, PAGE_KERNEL);
 		mapped_ram_size += end - start;
 		can_use_brk_pgt = true;
 	}
@@ -661,7 +662,7 @@ void __init init_mem_mapping(void)
 #endif
 
 	/* the ISA range is always mapped regardless of memory holes */
-	init_memory_mapping(0, ISA_END_ADDRESS);
+	init_memory_mapping(0, ISA_END_ADDRESS, PAGE_KERNEL);
 
 	/* Init the trampoline, possibly with KASLR memory offset */
 	init_trampoline();
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index de73992..4222a01 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -257,7 +257,8 @@ static inline int __is_kernel_text(unsigned long addr)
 unsigned long __init
 kernel_physical_mapping_init(unsigned long start,
 			     unsigned long end,
-			     unsigned long page_size_mask)
+			     unsigned long page_size_mask,
+			     pgprot_t prot)
 {
 	int use_pse = page_size_mask == (1<<PG_LEVEL_2M);
 	unsigned long last_map_addr = end;
@@ -819,12 +820,24 @@ void __init mem_init(void)
 
 #ifdef CONFIG_MEMORY_HOTPLUG
 int arch_add_memory(int nid, u64 start, u64 size,
-			struct mhp_restrictions *restrictions)
+		    struct mhp_params *params)
 {
 	unsigned long start_pfn = start >> PAGE_SHIFT;
 	unsigned long nr_pages = size >> PAGE_SHIFT;
+	int ret;
 
-	return __add_pages(nid, start_pfn, nr_pages, restrictions);
+	/*
+	 * The page tables were already mapped at boot so if the caller
+	 * requests a different mapping type then we must change all the
+	 * pages with __set_memory_prot().
+	 */
+	if (params->pgprot.pgprot != PAGE_KERNEL.pgprot) {
+		ret = __set_memory_prot(start, nr_pages, params->pgprot);
+		if (ret)
+			return ret;
+	}
+
+	return __add_pages(nid, start_pfn, nr_pages, params);
 }
 
 void arch_remove_memory(int nid, u64 start, u64 size,
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 0a14711..3b289c2 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -585,7 +585,7 @@ phys_pmd_init(pmd_t *pmd_page, unsigned long paddr, unsigned long paddr_end,
  */
 static unsigned long __meminit
 phys_pud_init(pud_t *pud_page, unsigned long paddr, unsigned long paddr_end,
-	      unsigned long page_size_mask, bool init)
+	      unsigned long page_size_mask, pgprot_t _prot, bool init)
 {
 	unsigned long pages = 0, paddr_next;
 	unsigned long paddr_last = paddr_end;
@@ -595,7 +595,7 @@ phys_pud_init(pud_t *pud_page, unsigned long paddr, unsigned long paddr_end,
 	for (; i < PTRS_PER_PUD; i++, paddr = paddr_next) {
 		pud_t *pud;
 		pmd_t *pmd;
-		pgprot_t prot = PAGE_KERNEL;
+		pgprot_t prot = _prot;
 
 		vaddr = (unsigned long)__va(paddr);
 		pud = pud_page + pud_index(vaddr);
@@ -644,9 +644,12 @@ phys_pud_init(pud_t *pud_page, unsigned long paddr, unsigned long paddr_end,
 		if (page_size_mask & (1<<PG_LEVEL_1G)) {
 			pages++;
 			spin_lock(&init_mm.page_table_lock);
+
+			prot = __pgprot(pgprot_val(prot) | __PAGE_KERNEL_LARGE);
+
 			set_pte_init((pte_t *)pud,
 				     pfn_pte((paddr & PUD_MASK) >> PAGE_SHIFT,
-					     PAGE_KERNEL_LARGE),
+					     prot),
 				     init);
 			spin_unlock(&init_mm.page_table_lock);
 			paddr_last = paddr_next;
@@ -669,7 +672,7 @@ phys_pud_init(pud_t *pud_page, unsigned long paddr, unsigned long paddr_end,
 
 static unsigned long __meminit
 phys_p4d_init(p4d_t *p4d_page, unsigned long paddr, unsigned long paddr_end,
-	      unsigned long page_size_mask, bool init)
+	      unsigned long page_size_mask, pgprot_t prot, bool init)
 {
 	unsigned long vaddr, vaddr_end, vaddr_next, paddr_next, paddr_last;
 
@@ -679,7 +682,7 @@ phys_p4d_init(p4d_t *p4d_page, unsigned long paddr, unsigned long paddr_end,
 
 	if (!pgtable_l5_enabled())
 		return phys_pud_init((pud_t *) p4d_page, paddr, paddr_end,
-				     page_size_mask, init);
+				     page_size_mask, prot, init);
 
 	for (; vaddr < vaddr_end; vaddr = vaddr_next) {
 		p4d_t *p4d = p4d_page + p4d_index(vaddr);
@@ -702,13 +705,13 @@ phys_p4d_init(p4d_t *p4d_page, unsigned long paddr, unsigned long paddr_end,
 		if (!p4d_none(*p4d)) {
 			pud = pud_offset(p4d, 0);
 			paddr_last = phys_pud_init(pud, paddr, __pa(vaddr_end),
-					page_size_mask, init);
+					page_size_mask, prot, init);
 			continue;
 		}
 
 		pud = alloc_low_page();
 		paddr_last = phys_pud_init(pud, paddr, __pa(vaddr_end),
-					   page_size_mask, init);
+					   page_size_mask, prot, init);
 
 		spin_lock(&init_mm.page_table_lock);
 		p4d_populate_init(&init_mm, p4d, pud, init);
@@ -722,7 +725,7 @@ static unsigned long __meminit
 __kernel_physical_mapping_init(unsigned long paddr_start,
 			       unsigned long paddr_end,
 			       unsigned long page_size_mask,
-			       bool init)
+			       pgprot_t prot, bool init)
 {
 	bool pgd_changed = false;
 	unsigned long vaddr, vaddr_start, vaddr_end, vaddr_next, paddr_last;
@@ -743,13 +746,13 @@ __kernel_physical_mapping_init(unsigned long paddr_start,
 			paddr_last = phys_p4d_init(p4d, __pa(vaddr),
 						   __pa(vaddr_end),
 						   page_size_mask,
-						   init);
+						   prot, init);
 			continue;
 		}
 
 		p4d = alloc_low_page();
 		paddr_last = phys_p4d_init(p4d, __pa(vaddr), __pa(vaddr_end),
-					   page_size_mask, init);
+					   page_size_mask, prot, init);
 
 		spin_lock(&init_mm.page_table_lock);
 		if (pgtable_l5_enabled())
@@ -778,10 +781,10 @@ __kernel_physical_mapping_init(unsigned long paddr_start,
 unsigned long __meminit
 kernel_physical_mapping_init(unsigned long paddr_start,
 			     unsigned long paddr_end,
-			     unsigned long page_size_mask)
+			     unsigned long page_size_mask, pgprot_t prot)
 {
 	return __kernel_physical_mapping_init(paddr_start, paddr_end,
-					      page_size_mask, true);
+					      page_size_mask, prot, true);
 }
 
 /*
@@ -796,7 +799,8 @@ kernel_physical_mapping_change(unsigned long paddr_start,
 			       unsigned long page_size_mask)
 {
 	return __kernel_physical_mapping_init(paddr_start, paddr_end,
-					      page_size_mask, false);
+					      page_size_mask, PAGE_KERNEL,
+					      false);
 }
 
 #ifndef CONFIG_NUMA
@@ -843,11 +847,11 @@ static void update_end_of_memory_vars(u64 start, u64 size)
 }
 
 int add_pages(int nid, unsigned long start_pfn, unsigned long nr_pages,
-				struct mhp_restrictions *restrictions)
+	      struct mhp_params *params)
 {
 	int ret;
 
-	ret = __add_pages(nid, start_pfn, nr_pages, restrictions);
+	ret = __add_pages(nid, start_pfn, nr_pages, params);
 	WARN_ON_ONCE(ret);
 
 	/* update max_pfn, max_low_pfn and high_memory */
@@ -858,14 +862,14 @@ int add_pages(int nid, unsigned long start_pfn, unsigned long nr_pages,
 }
 
 int arch_add_memory(int nid, u64 start, u64 size,
-			struct mhp_restrictions *restrictions)
+		    struct mhp_params *params)
 {
 	unsigned long start_pfn = start >> PAGE_SHIFT;
 	unsigned long nr_pages = size >> PAGE_SHIFT;
 
-	init_memory_mapping(start, start + size);
+	init_memory_mapping(start, start + size, params->pgprot);
 
-	return add_pages(nid, start_pfn, nr_pages, restrictions);
+	return add_pages(nid, start_pfn, nr_pages, params);
 }
 
 #define PAGE_INUSE 0xFD
diff --git a/arch/x86/mm/mm_internal.h b/arch/x86/mm/mm_internal.h
index eeae142..3f37b5c 100644
--- a/arch/x86/mm/mm_internal.h
+++ b/arch/x86/mm/mm_internal.h
@@ -12,7 +12,8 @@ void early_ioremap_page_table_range_init(void);
 
 unsigned long kernel_physical_mapping_init(unsigned long start,
 					     unsigned long end,
-					     unsigned long page_size_mask);
+					     unsigned long page_size_mask,
+					     pgprot_t prot);
 unsigned long kernel_physical_mapping_change(unsigned long start,
 					     unsigned long end,
 					     unsigned long page_size_mask);
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index 99f7a68..59ba008 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -25,11 +25,8 @@ nodemask_t numa_nodes_parsed __initdata;
 struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
 EXPORT_SYMBOL(node_data);
 
-static struct numa_meminfo numa_meminfo
-#ifndef CONFIG_MEMORY_HOTPLUG
-__initdata
-#endif
-;
+static struct numa_meminfo numa_meminfo __initdata_or_meminfo;
+static struct numa_meminfo numa_reserved_meminfo __initdata_or_meminfo;
 
 static int numa_distance_cnt;
 static u8 *numa_distance;
@@ -169,6 +166,19 @@ void __init numa_remove_memblk_from(int idx, struct numa_meminfo *mi)
 }
 
 /**
+ * numa_move_tail_memblk - Move a numa_memblk from one numa_meminfo to another
+ * @dst: numa_meminfo to append block to
+ * @idx: Index of memblk to remove
+ * @src: numa_meminfo to remove memblk from
+ */
+static void __init numa_move_tail_memblk(struct numa_meminfo *dst, int idx,
+					 struct numa_meminfo *src)
+{
+	dst->blk[dst->nr_blks++] = src->blk[idx];
+	numa_remove_memblk_from(idx, src);
+}
+
+/**
  * numa_add_memblk - Add one numa_memblk to numa_meminfo
  * @nid: NUMA node ID of the new memblk
  * @start: Start address of the new memblk
@@ -237,14 +247,19 @@ int __init numa_cleanup_meminfo(struct numa_meminfo *mi)
 	for (i = 0; i < mi->nr_blks; i++) {
 		struct numa_memblk *bi = &mi->blk[i];
 
-		/* make sure all blocks are inside the limits */
+		/* move / save reserved memory ranges */
+		if (!memblock_overlaps_region(&memblock.memory,
+					bi->start, bi->end - bi->start)) {
+			numa_move_tail_memblk(&numa_reserved_meminfo, i--, mi);
+			continue;
+		}
+
+		/* make sure all non-reserved blocks are inside the limits */
 		bi->start = max(bi->start, low);
 		bi->end = min(bi->end, high);
 
-		/* and there's no empty or non-exist block */
-		if (bi->start >= bi->end ||
-		    !memblock_overlaps_region(&memblock.memory,
-			bi->start, bi->end - bi->start))
+		/* and there's no empty block */
+		if (bi->start >= bi->end)
 			numa_remove_memblk_from(i--, mi);
 	}
 
@@ -881,16 +896,38 @@ EXPORT_SYMBOL(cpumask_of_node);
 
 #endif	/* !CONFIG_DEBUG_PER_CPU_MAPS */
 
-#ifdef CONFIG_MEMORY_HOTPLUG
-int memory_add_physaddr_to_nid(u64 start)
+#ifdef CONFIG_NUMA_KEEP_MEMINFO
+static int meminfo_to_nid(struct numa_meminfo *mi, u64 start)
 {
-	struct numa_meminfo *mi = &numa_meminfo;
-	int nid = mi->blk[0].nid;
 	int i;
 
 	for (i = 0; i < mi->nr_blks; i++)
 		if (mi->blk[i].start <= start && mi->blk[i].end > start)
-			nid = mi->blk[i].nid;
+			return mi->blk[i].nid;
+	return NUMA_NO_NODE;
+}
+
+int phys_to_target_node(phys_addr_t start)
+{
+	int nid = meminfo_to_nid(&numa_meminfo, start);
+
+	/*
+	 * Prefer online nodes, but if reserved memory might be
+	 * hot-added continue the search with reserved ranges.
+	 */
+	if (nid != NUMA_NO_NODE)
+		return nid;
+
+	return meminfo_to_nid(&numa_reserved_meminfo, start);
+}
+EXPORT_SYMBOL_GPL(phys_to_target_node);
+
+int memory_add_physaddr_to_nid(u64 start)
+{
+	int nid = meminfo_to_nid(&numa_meminfo, start);
+
+	if (nid == NUMA_NO_NODE)
+		nid = numa_meminfo.blk[0].nid;
 	return nid;
 }
 EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
diff --git a/arch/x86/mm/pat/set_memory.c b/arch/x86/mm/pat/set_memory.c
index 6d54240..59eca6a 100644
--- a/arch/x86/mm/pat/set_memory.c
+++ b/arch/x86/mm/pat/set_memory.c
@@ -1795,6 +1795,19 @@ static inline int cpa_clear_pages_array(struct page **pages, int numpages,
 		CPA_PAGES_ARRAY, pages);
 }
 
+/*
+ * _set_memory_prot is an internal helper for callers that have been passed
+ * a pgprot_t value from upper layers and a reservation has already been taken.
+ * If you want to set the pgprot to a specific page protocol, use the
+ * set_memory_xx() functions.
+ */
+int __set_memory_prot(unsigned long addr, int numpages, pgprot_t prot)
+{
+	return change_page_attr_set_clr(&addr, numpages, prot,
+					__pgprot(~pgprot_val(prot)), 0, 0,
+					NULL);
+}
+
 int _set_memory_uc(unsigned long addr, int numpages)
 {
 	/*
diff --git a/arch/x86/mm/pkeys.c b/arch/x86/mm/pkeys.c
index c6f84c0..8873ed1 100644
--- a/arch/x86/mm/pkeys.c
+++ b/arch/x86/mm/pkeys.c
@@ -63,7 +63,7 @@ int __execute_only_pkey(struct mm_struct *mm)
 static inline bool vma_is_pkey_exec_only(struct vm_area_struct *vma)
 {
 	/* Do this check first since the vm_flags should be hot */
-	if ((vma->vm_flags & (VM_READ | VM_WRITE | VM_EXEC)) != VM_EXEC)
+	if ((vma->vm_flags & VM_ACCESS_FLAGS) != VM_EXEC)
 		return false;
 	if (vma_pkey(vma) != vma->vm_mm->context.execute_only_pkey)
 		return false;
diff --git a/arch/x86/platform/efi/efi_64.c b/arch/x86/platform/efi/efi_64.c
index 211bb93..c5e393f 100644
--- a/arch/x86/platform/efi/efi_64.c
+++ b/arch/x86/platform/efi/efi_64.c
@@ -202,7 +202,7 @@ virt_to_phys_or_null_size(void *va, unsigned long size)
 
 int __init efi_setup_page_tables(unsigned long pa_memmap, unsigned num_pages)
 {
-	unsigned long pfn, text, pf;
+	unsigned long pfn, text, pf, rodata;
 	struct page *page;
 	unsigned npages;
 	pgd_t *pgd = efi_mm.pgd;
@@ -256,7 +256,7 @@ int __init efi_setup_page_tables(unsigned long pa_memmap, unsigned num_pages)
 
 	efi_scratch.phys_stack = page_to_phys(page + 1); /* stack grows down */
 
-	npages = (__end_rodata_aligned - _text) >> PAGE_SHIFT;
+	npages = (_etext - _text) >> PAGE_SHIFT;
 	text = __pa(_text);
 	pfn = text >> PAGE_SHIFT;
 
@@ -266,6 +266,14 @@ int __init efi_setup_page_tables(unsigned long pa_memmap, unsigned num_pages)
 		return 1;
 	}
 
+	npages = (__end_rodata - __start_rodata) >> PAGE_SHIFT;
+	rodata = __pa(__start_rodata);
+	pfn = rodata >> PAGE_SHIFT;
+	if (kernel_map_pages_in_pgd(pgd, pfn, rodata, npages, pf)) {
+		pr_err("Failed to map kernel rodata 1:1\n");
+		return 1;
+	}
+
 	return 0;
 }
 
@@ -638,7 +646,7 @@ efi_thunk_set_variable(efi_char16_t *name, efi_guid_t *vendor,
 	phys_vendor = virt_to_phys_or_null(vnd);
 	phys_data = virt_to_phys_or_null_size(data, data_size);
 
-	if (!phys_name || !phys_data)
+	if (!phys_name || (data && !phys_data))
 		status = EFI_INVALID_PARAMETER;
 	else
 		status = efi_thunk(set_variable, phys_name, phys_vendor,
@@ -669,7 +677,7 @@ efi_thunk_set_variable_nonblocking(efi_char16_t *name, efi_guid_t *vendor,
 	phys_vendor = virt_to_phys_or_null(vnd);
 	phys_data = virt_to_phys_or_null_size(data, data_size);
 
-	if (!phys_name || !phys_data)
+	if (!phys_name || (data && !phys_data))
 		status = EFI_INVALID_PARAMETER;
 	else
 		status = efi_thunk(set_variable, phys_name, phys_vendor,
diff --git a/arch/x86/platform/uv/bios_uv.c b/arch/x86/platform/uv/bios_uv.c
index 607f581..c60255d 100644
--- a/arch/x86/platform/uv/bios_uv.c
+++ b/arch/x86/platform/uv/bios_uv.c
@@ -352,7 +352,8 @@ void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size,
 	if (type == EFI_MEMORY_MAPPED_IO)
 		return ioremap(phys_addr, size);
 
-	last_map_pfn = init_memory_mapping(phys_addr, phys_addr + size);
+	last_map_pfn = init_memory_mapping(phys_addr, phys_addr + size,
+					   PAGE_KERNEL);
 	if ((last_map_pfn << PAGE_SHIFT) < phys_addr + size) {
 		unsigned long top = last_map_pfn << PAGE_SHIFT;
 		efi_ioremap(top, size - (top - phys_addr), type, attribute);
diff --git a/arch/x86/realmode/rm/.gitignore b/arch/x86/realmode/rm/.gitignore
index b6ed3a2..6c3464f 100644
--- a/arch/x86/realmode/rm/.gitignore
+++ b/arch/x86/realmode/rm/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 pasyms.h
 realmode.lds
 realmode.relocs
diff --git a/arch/x86/tools/.gitignore b/arch/x86/tools/.gitignore
index be0ed06..d36dc7c 100644
--- a/arch/x86/tools/.gitignore
+++ b/arch/x86/tools/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 relocs
diff --git a/arch/x86/um/asm/processor.h b/arch/x86/um/asm/processor.h
index 593d5f39..4787103 100644
--- a/arch/x86/um/asm/processor.h
+++ b/arch/x86/um/asm/processor.h
@@ -1,6 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __UM_PROCESSOR_H
 #define __UM_PROCESSOR_H
+#include <linux/time-internal.h>
 
 /* include faultinfo structure */
 #include <sysdep/faultinfo.h>
@@ -21,12 +22,19 @@
 #include <asm/user.h>
 
 /* REP NOP (PAUSE) is a good thing to insert into busy-wait loops. */
-static inline void rep_nop(void)
+static __always_inline void rep_nop(void)
 {
 	__asm__ __volatile__("rep;nop": : :"memory");
 }
 
-#define cpu_relax()		rep_nop()
+static __always_inline void cpu_relax(void)
+{
+	if (time_travel_mode == TT_MODE_INFCPU ||
+	    time_travel_mode == TT_MODE_EXTERNAL)
+		time_travel_ndelay(1);
+	else
+		rep_nop();
+}
 
 #define task_pt_regs(t) (&(t)->thread.regs)
 
diff --git a/arch/x86/um/asm/vm-flags.h b/arch/x86/um/asm/vm-flags.h
index 7c297e9..df7a389 100644
--- a/arch/x86/um/asm/vm-flags.h
+++ b/arch/x86/um/asm/vm-flags.h
@@ -9,17 +9,11 @@
 
 #ifdef CONFIG_X86_32
 
-#define VM_DATA_DEFAULT_FLAGS \
-	(VM_READ | VM_WRITE | \
-	((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \
-		 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+#define VM_DATA_DEFAULT_FLAGS	VM_DATA_FLAGS_TSK_EXEC
 
 #else
 
-#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \
-	VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-#define VM_STACK_DEFAULT_FLAGS (VM_GROWSDOWN | VM_READ | VM_WRITE | \
-	VM_EXEC | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+#define VM_STACK_DEFAULT_FLAGS (VM_GROWSDOWN | VM_DATA_FLAGS_EXEC)
 
 #endif
 #endif
diff --git a/arch/x86/um/vdso/.gitignore b/arch/x86/um/vdso/.gitignore
index f8b69d8..652e31d 100644
--- a/arch/x86/um/vdso/.gitignore
+++ b/arch/x86/um/vdso/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 vdso.lds
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index 33b0e20..1a2d8a5 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -985,7 +985,7 @@ void xen_enable_syscall(void)
 #endif /* CONFIG_X86_64 */
 }
 
-void __init xen_pvmmu_arch_setup(void)
+static void __init xen_pvmmu_arch_setup(void)
 {
 	HYPERVISOR_vm_assist(VMASST_CMD_enable, VMASST_TYPE_4gb_segments);
 	HYPERVISOR_vm_assist(VMASST_CMD_enable, VMASST_TYPE_writable_pagetables);
diff --git a/arch/x86/xen/smp_pv.c b/arch/x86/xen/smp_pv.c
index 802ee5b..8fb8a50 100644
--- a/arch/x86/xen/smp_pv.c
+++ b/arch/x86/xen/smp_pv.c
@@ -53,6 +53,7 @@ static DEFINE_PER_CPU(struct xen_common_irq, xen_irq_work) = { .irq = -1 };
 static DEFINE_PER_CPU(struct xen_common_irq, xen_pmu_irq) = { .irq = -1 };
 
 static irqreturn_t xen_irq_work_interrupt(int irq, void *dev_id);
+void asm_cpu_bringup_and_idle(void);
 
 static void cpu_bringup(void)
 {
@@ -309,7 +310,7 @@ cpu_initialize_context(unsigned int cpu, struct task_struct *idle)
 	 * pointing just below where pt_regs would be if it were a normal
 	 * kernel entry.
 	 */
-	ctxt->user_regs.eip = (unsigned long)cpu_bringup_and_idle;
+	ctxt->user_regs.eip = (unsigned long)asm_cpu_bringup_and_idle;
 	ctxt->flags = VGCF_IN_KERNEL;
 	ctxt->user_regs.eflags = 0x1000; /* IOPL_RING1 */
 	ctxt->user_regs.ds = __USER_DS;
diff --git a/arch/x86/xen/xen-head.S b/arch/x86/xen/xen-head.S
index 1d0cee3..1ba601d 100644
--- a/arch/x86/xen/xen-head.S
+++ b/arch/x86/xen/xen-head.S
@@ -35,7 +35,11 @@
 	rep __ASM_SIZE(stos)
 
 	mov %_ASM_SI, xen_start_info
-	mov $init_thread_union+THREAD_SIZE, %_ASM_SP
+#ifdef CONFIG_X86_64
+	mov initial_stack(%rip), %rsp
+#else
+	mov initial_stack, %esp
+#endif
 
 #ifdef CONFIG_X86_64
 	/* Set up %gs.
@@ -51,9 +55,19 @@
 	wrmsr
 #endif
 
-	jmp xen_start_kernel
+	call xen_start_kernel
 SYM_CODE_END(startup_xen)
 	__FINIT
+
+#ifdef CONFIG_XEN_PV_SMP
+.pushsection .text
+SYM_CODE_START(asm_cpu_bringup_and_idle)
+	UNWIND_HINT_EMPTY
+
+	call cpu_bringup_and_idle
+SYM_CODE_END(asm_cpu_bringup_and_idle)
+.popsection
+#endif
 #endif
 
 .pushsection .text
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 32ee759..3a9f1e8 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -6,7 +6,7 @@
 	select ARCH_HAS_DMA_PREP_COHERENT if MMU
 	select ARCH_HAS_SYNC_DMA_FOR_CPU if MMU
 	select ARCH_HAS_SYNC_DMA_FOR_DEVICE if MMU
-	select ARCH_HAS_UNCACHED_SEGMENT if MMU
+	select ARCH_HAS_DMA_SET_UNCACHED if MMU
 	select ARCH_USE_QUEUED_RWLOCKS
 	select ARCH_USE_QUEUED_SPINLOCKS
 	select ARCH_WANT_FRAME_POINTERS
@@ -122,7 +122,7 @@
 	help
 	  Provide the name of a custom Xtensa processor variant.
 	  This CORENAME selects arch/xtensa/variant/CORENAME.
-	  Dont forget you have to select MMU if you have one.
+	  Don't forget you have to select MMU if you have one.
 
 config XTENSA_VARIANT_NAME
 	string
diff --git a/arch/xtensa/boot/.gitignore b/arch/xtensa/boot/.gitignore
index 38177c7..615f1f7 100644
--- a/arch/xtensa/boot/.gitignore
+++ b/arch/xtensa/boot/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 uImage
 zImage.redboot
diff --git a/arch/xtensa/boot/Makefile b/arch/xtensa/boot/Makefile
index efb91bf..1a14d38 100644
--- a/arch/xtensa/boot/Makefile
+++ b/arch/xtensa/boot/Makefile
@@ -14,7 +14,6 @@
 
 BIG_ENDIAN	:= $(shell echo __XTENSA_EB__ | $(CC) -E - | grep -v "\#")
 
-export ccflags-y
 export BIG_ENDIAN
 
 subdir-y	:= lib
diff --git a/arch/xtensa/boot/boot-elf/.gitignore b/arch/xtensa/boot/boot-elf/.gitignore
index 5ff8fbb..7473404 100644
--- a/arch/xtensa/boot/boot-elf/.gitignore
+++ b/arch/xtensa/boot/boot-elf/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 boot.lds
diff --git a/arch/xtensa/boot/lib/.gitignore b/arch/xtensa/boot/lib/.gitignore
index 1629a61..805a824 100644
--- a/arch/xtensa/boot/lib/.gitignore
+++ b/arch/xtensa/boot/lib/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 inffast.c
 inflate.c
 inftrees.c
diff --git a/arch/xtensa/include/asm/page.h b/arch/xtensa/include/asm/page.h
index f4771c2..37ce25e 100644
--- a/arch/xtensa/include/asm/page.h
+++ b/arch/xtensa/include/asm/page.h
@@ -203,8 +203,5 @@ static inline unsigned long ___pa(unsigned long va)
 
 #endif /* __ASSEMBLY__ */
 
-#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
-				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
 #include <asm-generic/memory_model.h>
 #endif /* _XTENSA_PAGE_H */
diff --git a/arch/xtensa/include/asm/pgtable.h b/arch/xtensa/include/asm/pgtable.h
index 27ac17c..8be0c05 100644
--- a/arch/xtensa/include/asm/pgtable.h
+++ b/arch/xtensa/include/asm/pgtable.h
@@ -266,7 +266,6 @@ static inline void paging_init(void) { }
 static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_WRITABLE; }
 static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; }
 static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; }
-static inline int pte_special(pte_t pte) { return 0; }
 
 static inline pte_t pte_wrprotect(pte_t pte)	
 	{ pte_val(pte) &= ~(_PAGE_WRITABLE | _PAGE_HW_WRITE); return pte; }
@@ -280,8 +279,6 @@ static inline pte_t pte_mkyoung(pte_t pte)
 	{ pte_val(pte) |= _PAGE_ACCESSED; return pte; }
 static inline pte_t pte_mkwrite(pte_t pte)
 	{ pte_val(pte) |= _PAGE_WRITABLE; return pte; }
-static inline pte_t pte_mkspecial(pte_t pte)
-	{ return pte; }
 
 #define pgprot_noncached(prot) (__pgprot(pgprot_val(prot) & ~_PAGE_CA_MASK))
 
diff --git a/arch/xtensa/kernel/.gitignore b/arch/xtensa/kernel/.gitignore
index c5f676c..bbb90f9 100644
--- a/arch/xtensa/kernel/.gitignore
+++ b/arch/xtensa/kernel/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 vmlinux.lds
diff --git a/arch/xtensa/kernel/pci-dma.c b/arch/xtensa/kernel/pci-dma.c
index 72b6222..17c4384 100644
--- a/arch/xtensa/kernel/pci-dma.c
+++ b/arch/xtensa/kernel/pci-dma.c
@@ -88,18 +88,12 @@ void arch_dma_prep_coherent(struct page *page, size_t size)
 
 /*
  * Memory caching is platform-dependent in noMMU xtensa configurations.
- * The following two functions should be implemented in platform code
- * in order to enable coherent DMA memory operations when CONFIG_MMU is not
- * enabled.
+ * This function should be implemented in platform code in order to enable
+ * coherent DMA memory operations when CONFIG_MMU is not enabled.
  */
 #ifdef CONFIG_MMU
-void *uncached_kernel_address(void *p)
+void *arch_dma_set_uncached(void *p, size_t size)
 {
 	return p + XCHAL_KSEG_BYPASS_VADDR - XCHAL_KSEG_CACHED_VADDR;
 }
-
-void *cached_kernel_address(void *p)
-{
-	return p + XCHAL_KSEG_CACHED_VADDR - XCHAL_KSEG_BYPASS_VADDR;
-}
 #endif /* CONFIG_MMU */
diff --git a/arch/xtensa/kernel/smp.c b/arch/xtensa/kernel/smp.c
index 83b244c..cd85a7a 100644
--- a/arch/xtensa/kernel/smp.c
+++ b/arch/xtensa/kernel/smp.c
@@ -53,16 +53,12 @@ static void system_flush_invalidate_dcache_range(unsigned long start,
 #define IPI_IRQ	0
 
 static irqreturn_t ipi_interrupt(int irq, void *dev_id);
-static struct irqaction ipi_irqaction = {
-	.handler =	ipi_interrupt,
-	.flags =	IRQF_PERCPU,
-	.name =		"ipi",
-};
 
 void ipi_init(void)
 {
 	unsigned irq = irq_create_mapping(NULL, IPI_IRQ);
-	setup_irq(irq, &ipi_irqaction);
+	if (request_irq(irq, ipi_interrupt, IRQF_PERCPU, "ipi", NULL))
+		pr_err("Failed to request irq %u (ipi)\n", irq);
 }
 
 static inline unsigned int get_core_count(void)
diff --git a/arch/xtensa/kernel/syscalls/syscallhdr.sh b/arch/xtensa/kernel/syscalls/syscallhdr.sh
index d37db64..eebfb8a 100644
--- a/arch/xtensa/kernel/syscalls/syscallhdr.sh
+++ b/arch/xtensa/kernel/syscalls/syscallhdr.sh
@@ -32,5 +32,5 @@
 	printf "#define __NR_syscalls\t%s\n" "${nxt}"
 	printf "#endif\n"
 	printf "\n"
-	printf "#endif /* %s */" "${fileguard}"
+	printf "#endif /* %s */\n" "${fileguard}"
 ) > "$out"
diff --git a/arch/xtensa/kernel/time.c b/arch/xtensa/kernel/time.c
index 69db8c9..77971fe 100644
--- a/arch/xtensa/kernel/time.c
+++ b/arch/xtensa/kernel/time.c
@@ -128,12 +128,6 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction timer_irqaction = {
-	.handler =	timer_interrupt,
-	.flags =	IRQF_TIMER,
-	.name =		"timer",
-};
-
 void local_timer_setup(unsigned cpu)
 {
 	struct ccount_timer *timer = &per_cpu(ccount_timer, cpu);
@@ -184,6 +178,8 @@ static inline void calibrate_ccount(void)
 
 void __init time_init(void)
 {
+	int irq;
+
 	of_clk_init(NULL);
 #ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT
 	pr_info("Calibrating CPU frequency ");
@@ -199,7 +195,9 @@ void __init time_init(void)
 	     __func__);
 	clocksource_register_hz(&ccount_clocksource, ccount_freq);
 	local_timer_setup(0);
-	setup_irq(this_cpu_ptr(&ccount_timer)->evt.irq, &timer_irqaction);
+	irq = this_cpu_ptr(&ccount_timer)->evt.irq;
+	if (request_irq(irq, timer_interrupt, IRQF_TIMER, "timer", NULL))
+		pr_err("Failed to request irq %d (timer)\n", irq);
 	sched_clock_register(ccount_sched_clock_read, 32, ccount_freq);
 	timer_probe();
 }
diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c
index c15a260..c5dc833 100644
--- a/block/blk-cgroup.c
+++ b/block/blk-cgroup.c
@@ -883,8 +883,8 @@ static void blkcg_css_offline(struct cgroup_subsys_state *css)
 	/* this prevents anyone from attaching or migrating to this blkcg */
 	wb_blkcg_offline(blkcg);
 
-	/* put the base cgwb reference allowing step 2 to be triggered */
-	blkcg_cgwb_put(blkcg);
+	/* put the base online pin allowing step 2 to be triggered */
+	blkcg_unpin_online(blkcg);
 }
 
 /**
@@ -983,11 +983,11 @@ blkcg_css_alloc(struct cgroup_subsys_state *parent_css)
 	}
 
 	spin_lock_init(&blkcg->lock);
+	refcount_set(&blkcg->online_pin, 1);
 	INIT_RADIX_TREE(&blkcg->blkg_tree, GFP_NOWAIT | __GFP_NOWARN);
 	INIT_HLIST_HEAD(&blkcg->blkg_list);
 #ifdef CONFIG_CGROUP_WRITEBACK
 	INIT_LIST_HEAD(&blkcg->cgwb_list);
-	refcount_set(&blkcg->cgwb_refcnt, 1);
 #endif
 	list_add_tail(&blkcg->all_blkcgs_node, &all_blkcgs);
 
@@ -1006,6 +1006,21 @@ blkcg_css_alloc(struct cgroup_subsys_state *parent_css)
 	return ret;
 }
 
+static int blkcg_css_online(struct cgroup_subsys_state *css)
+{
+	struct blkcg *blkcg = css_to_blkcg(css);
+	struct blkcg *parent = blkcg_parent(blkcg);
+
+	/*
+	 * blkcg_pin_online() is used to delay blkcg offline so that blkgs
+	 * don't go offline while cgwbs are still active on them.  Pin the
+	 * parent so that offline always happens towards the root.
+	 */
+	if (parent)
+		blkcg_pin_online(parent);
+	return 0;
+}
+
 /**
  * blkcg_init_queue - initialize blkcg part of request queue
  * @q: request_queue to initialize
@@ -1199,6 +1214,7 @@ static void blkcg_exit(struct task_struct *tsk)
 
 struct cgroup_subsys io_cgrp_subsys = {
 	.css_alloc = blkcg_css_alloc,
+	.css_online = blkcg_css_online,
 	.css_offline = blkcg_css_offline,
 	.css_free = blkcg_css_free,
 	.can_attach = blkcg_can_attach,
diff --git a/block/blk-mq.c b/block/blk-mq.c
index f6291ce..a7785df 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -1222,8 +1222,10 @@ bool blk_mq_dispatch_rq_list(struct request_queue *q, struct list_head *list,
 		rq = list_first_entry(list, struct request, queuelist);
 
 		hctx = rq->mq_hctx;
-		if (!got_budget && !blk_mq_get_dispatch_budget(hctx))
+		if (!got_budget && !blk_mq_get_dispatch_budget(hctx)) {
+			blk_mq_put_driver_tag(rq);
 			break;
+		}
 
 		if (!blk_mq_get_driver_tag(rq)) {
 			/*
@@ -1289,7 +1291,7 @@ bool blk_mq_dispatch_rq_list(struct request_queue *q, struct list_head *list,
 		 * the driver there was more coming, but that turned out to
 		 * be a lie.
 		 */
-		if (q->mq_ops->commit_rqs)
+		if (q->mq_ops->commit_rqs && queued)
 			q->mq_ops->commit_rqs(hctx);
 
 		spin_lock(&hctx->lock);
@@ -1911,6 +1913,8 @@ blk_status_t blk_mq_request_issue_directly(struct request *rq, bool last)
 void blk_mq_try_issue_list_directly(struct blk_mq_hw_ctx *hctx,
 		struct list_head *list)
 {
+	int queued = 0;
+
 	while (!list_empty(list)) {
 		blk_status_t ret;
 		struct request *rq = list_first_entry(list, struct request,
@@ -1926,7 +1930,8 @@ void blk_mq_try_issue_list_directly(struct blk_mq_hw_ctx *hctx,
 				break;
 			}
 			blk_mq_end_request(rq, ret);
-		}
+		} else
+			queued++;
 	}
 
 	/*
@@ -1934,7 +1939,7 @@ void blk_mq_try_issue_list_directly(struct blk_mq_hw_ctx *hctx,
 	 * the driver there was more coming, but that turned out to
 	 * be a lie.
 	 */
-	if (!list_empty(list) && hctx->queue->mq_ops->commit_rqs)
+	if (!list_empty(list) && hctx->queue->mq_ops->commit_rqs && queued)
 		hctx->queue->mq_ops->commit_rqs(hctx);
 }
 
diff --git a/block/blk-wbt.c b/block/blk-wbt.c
index 8641ba9..9cb082f 100644
--- a/block/blk-wbt.c
+++ b/block/blk-wbt.c
@@ -313,7 +313,7 @@ static void scale_up(struct rq_wb *rwb)
 	calc_wb_limits(rwb);
 	rwb->unknown_cnt = 0;
 	rwb_wake_all(rwb);
-	rwb_trace_step(rwb, "scale up");
+	rwb_trace_step(rwb, tracepoint_string("scale up"));
 }
 
 static void scale_down(struct rq_wb *rwb, bool hard_throttle)
@@ -322,7 +322,7 @@ static void scale_down(struct rq_wb *rwb, bool hard_throttle)
 		return;
 	calc_wb_limits(rwb);
 	rwb->unknown_cnt = 0;
-	rwb_trace_step(rwb, "scale down");
+	rwb_trace_step(rwb, tracepoint_string("scale down"));
 }
 
 static void rwb_arm_timer(struct rq_wb *rwb)
diff --git a/block/partitions/core.c b/block/partitions/core.c
index b79c451..bc1ded1 100644
--- a/block/partitions/core.c
+++ b/block/partitions/core.c
@@ -496,7 +496,7 @@ int blk_drop_partitions(struct gendisk *disk, struct block_device *bdev)
 
 	if (!disk_part_scan_enabled(disk))
 		return 0;
-	if (bdev->bd_part_count || bdev->bd_super)
+	if (bdev->bd_part_count || bdev->bd_openers > 1)
 		return -EBUSY;
 	res = invalidate_partition(disk, 0);
 	if (res)
diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c
index b4e73d5..ef722f0 100644
--- a/block/scsi_ioctl.c
+++ b/block/scsi_ioctl.c
@@ -193,6 +193,10 @@ static void blk_set_cmd_filter_defaults(struct blk_cmd_filter *filter)
 	__set_bit(GPCMD_LOAD_UNLOAD, filter->write_ok);
 	__set_bit(GPCMD_SET_STREAMING, filter->write_ok);
 	__set_bit(GPCMD_SET_READ_AHEAD, filter->write_ok);
+
+	/* ZBC Commands */
+	__set_bit(ZBC_OUT, filter->write_ok);
+	__set_bit(ZBC_IN, filter->read_ok);
 }
 
 int blk_verify_command(unsigned char *cmd, fmode_t mode)
diff --git a/certs/.gitignore b/certs/.gitignore
index f51aea4..2a24839 100644
--- a/certs/.gitignore
+++ b/certs/.gitignore
@@ -1,4 +1,2 @@
-#
-# Generated files
-#
+# SPDX-License-Identifier: GPL-2.0-only
 x509_certificate_list
diff --git a/drivers/Kconfig b/drivers/Kconfig
index c739665..dcecc9f 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -138,6 +138,10 @@
 
 source "drivers/virtio/Kconfig"
 
+source "drivers/vdpa/Kconfig"
+
+source "drivers/vhost/Kconfig"
+
 source "drivers/hv/Kconfig"
 
 source "drivers/xen/Kconfig"
@@ -200,6 +204,8 @@
 
 source "drivers/android/Kconfig"
 
+source "drivers/gpu/trace/Kconfig"
+
 source "drivers/nvdimm/Kconfig"
 
 source "drivers/dax/Kconfig"
diff --git a/drivers/Makefile b/drivers/Makefile
index 7646549a..c0cd1b9 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -42,6 +42,7 @@
 obj-y				+= soc/
 
 obj-$(CONFIG_VIRTIO)		+= virtio/
+obj-$(CONFIG_VDPA)		+= vdpa/
 obj-$(CONFIG_XEN)		+= xen/
 
 # regulators early, since some subsystems rely on them to initialize
diff --git a/drivers/acpi/acpica/acnamesp.h b/drivers/acpi/acpica/acnamesp.h
index e618ddf..40f6a3c 100644
--- a/drivers/acpi/acpica/acnamesp.h
+++ b/drivers/acpi/acpica/acnamesp.h
@@ -256,6 +256,8 @@ u32
 acpi_ns_build_normalized_path(struct acpi_namespace_node *node,
 			      char *full_path, u32 path_size, u8 no_trailing);
 
+void acpi_ns_normalize_pathname(char *original_path);
+
 char *acpi_ns_get_normalized_pathname(struct acpi_namespace_node *node,
 				      u8 no_trailing);
 
diff --git a/drivers/acpi/acpica/dbinput.c b/drivers/acpi/acpica/dbinput.c
index aa71f65..ee6a1b7 100644
--- a/drivers/acpi/acpica/dbinput.c
+++ b/drivers/acpi/acpica/dbinput.c
@@ -468,16 +468,14 @@ char *acpi_db_get_next_token(char *string,
 		return (NULL);
 	}
 
-	/* Remove any spaces at the beginning */
+	/* Remove any spaces at the beginning, ignore blank lines */
 
-	if (*string == ' ') {
-		while (*string && (*string == ' ')) {
-			string++;
-		}
+	while (*string && isspace(*string)) {
+		string++;
+	}
 
-		if (!(*string)) {
-			return (NULL);
-		}
+	if (!(*string)) {
+		return (NULL);
 	}
 
 	switch (*string) {
@@ -570,7 +568,7 @@ char *acpi_db_get_next_token(char *string,
 
 		/* Find end of token */
 
-		while (*string && (*string != ' ')) {
+		while (*string && !isspace(*string)) {
 			string++;
 		}
 		break;
diff --git a/drivers/acpi/acpica/dbxface.c b/drivers/acpi/acpica/dbxface.c
index 3eb45ea..9dfd693 100644
--- a/drivers/acpi/acpica/dbxface.c
+++ b/drivers/acpi/acpica/dbxface.c
@@ -409,6 +409,7 @@ acpi_status acpi_initialize_debugger(void)
 	acpi_gbl_db_output_flags = ACPI_DB_CONSOLE_OUTPUT;
 
 	acpi_gbl_db_opt_no_ini_methods = FALSE;
+	acpi_gbl_db_opt_no_region_support = FALSE;
 
 	acpi_gbl_db_buffer = acpi_os_allocate(ACPI_DEBUG_BUFFER_SIZE);
 	if (!acpi_gbl_db_buffer) {
diff --git a/drivers/acpi/acpica/dswexec.c b/drivers/acpi/acpica/dswexec.c
index 5e81a1a..1d4f8c8 100644
--- a/drivers/acpi/acpica/dswexec.c
+++ b/drivers/acpi/acpica/dswexec.c
@@ -16,6 +16,9 @@
 #include "acinterp.h"
 #include "acnamesp.h"
 #include "acdebug.h"
+#ifdef ACPI_EXEC_APP
+#include "aecommon.h"
+#endif
 
 #define _COMPONENT          ACPI_DISPATCHER
 ACPI_MODULE_NAME("dswexec")
@@ -329,6 +332,10 @@ acpi_status acpi_ds_exec_end_op(struct acpi_walk_state *walk_state)
 	u32 op_class;
 	union acpi_parse_object *next_op;
 	union acpi_parse_object *first_arg;
+#ifdef ACPI_EXEC_APP
+	char *namepath;
+	union acpi_operand_object *obj_desc;
+#endif
 
 	ACPI_FUNCTION_TRACE_PTR(ds_exec_end_op, walk_state);
 
@@ -537,6 +544,32 @@ acpi_status acpi_ds_exec_end_op(struct acpi_walk_state *walk_state)
 
 			status =
 			    acpi_ds_eval_buffer_field_operands(walk_state, op);
+			if (ACPI_FAILURE(status)) {
+				break;
+			}
+#ifdef ACPI_EXEC_APP
+			/*
+			 * acpi_exec support for namespace initialization file (initialize
+			 * buffer_fields in this code.)
+			 */
+			namepath =
+			    acpi_ns_get_external_pathname(op->common.node);
+			status = ae_lookup_init_file_entry(namepath, &obj_desc);
+			if (ACPI_SUCCESS(status)) {
+				status =
+				    acpi_ex_write_data_to_field(obj_desc,
+								op->common.
+								node->object,
+								NULL);
+				if ACPI_FAILURE
+					(status) {
+					ACPI_EXCEPTION((AE_INFO, status,
+							"While writing to buffer field"));
+					}
+			}
+			ACPI_FREE(namepath);
+			status = AE_OK;
+#endif
 			break;
 
 		case AML_TYPE_CREATE_OBJECT:
diff --git a/drivers/acpi/acpica/dswload.c b/drivers/acpi/acpica/dswload.c
index 697974e..2706932 100644
--- a/drivers/acpi/acpica/dswload.c
+++ b/drivers/acpi/acpica/dswload.c
@@ -14,7 +14,6 @@
 #include "acdispat.h"
 #include "acinterp.h"
 #include "acnamesp.h"
-
 #ifdef ACPI_ASL_COMPILER
 #include "acdisasm.h"
 #endif
@@ -399,7 +398,6 @@ acpi_status acpi_ds_load1_end_op(struct acpi_walk_state *walk_state)
 	union acpi_parse_object *op;
 	acpi_object_type object_type;
 	acpi_status status = AE_OK;
-
 #ifdef ACPI_ASL_COMPILER
 	u8 param_count;
 #endif
diff --git a/drivers/acpi/acpica/dswload2.c b/drivers/acpi/acpica/dswload2.c
index b31457c..edadbe1 100644
--- a/drivers/acpi/acpica/dswload2.c
+++ b/drivers/acpi/acpica/dswload2.c
@@ -15,6 +15,9 @@
 #include "acinterp.h"
 #include "acnamesp.h"
 #include "acevents.h"
+#ifdef ACPI_EXEC_APP
+#include "aecommon.h"
+#endif
 
 #define _COMPONENT          ACPI_DISPATCHER
 ACPI_MODULE_NAME("dswload2")
@@ -373,6 +376,10 @@ acpi_status acpi_ds_load2_end_op(struct acpi_walk_state *walk_state)
 	struct acpi_namespace_node *new_node;
 	u32 i;
 	u8 region_space;
+#ifdef ACPI_EXEC_APP
+	union acpi_operand_object *obj_desc;
+	char *namepath;
+#endif
 
 	ACPI_FUNCTION_TRACE(ds_load2_end_op);
 
@@ -466,6 +473,11 @@ acpi_status acpi_ds_load2_end_op(struct acpi_walk_state *walk_state)
 		 * be evaluated later during the execution phase
 		 */
 		status = acpi_ds_create_buffer_field(op, walk_state);
+		if (ACPI_FAILURE(status)) {
+			ACPI_EXCEPTION((AE_INFO, status,
+					"CreateBufferField failure"));
+			goto cleanup;
+			}
 		break;
 
 	case AML_TYPE_NAMED_FIELD:
@@ -604,6 +616,29 @@ acpi_status acpi_ds_load2_end_op(struct acpi_walk_state *walk_state)
 		case AML_NAME_OP:
 
 			status = acpi_ds_create_node(walk_state, node, op);
+			if (ACPI_FAILURE(status)) {
+				goto cleanup;
+			}
+#ifdef ACPI_EXEC_APP
+			/*
+			 * acpi_exec support for namespace initialization file (initialize
+			 * Name opcodes in this code.)
+			 */
+			namepath = acpi_ns_get_external_pathname(node);
+			status = ae_lookup_init_file_entry(namepath, &obj_desc);
+			if (ACPI_SUCCESS(status)) {
+
+				/* Detach any existing object, attach new object */
+
+				if (node->object) {
+					acpi_ns_detach_object(node);
+				}
+				acpi_ns_attach_object(node, obj_desc,
+						      obj_desc->common.type);
+			}
+			ACPI_FREE(namepath);
+			status = AE_OK;
+#endif
 			break;
 
 		case AML_METHOD_OP:
diff --git a/drivers/acpi/acpica/nsnames.c b/drivers/acpi/acpica/nsnames.c
index d4d2614..d91153f 100644
--- a/drivers/acpi/acpica/nsnames.c
+++ b/drivers/acpi/acpica/nsnames.c
@@ -13,9 +13,6 @@
 #define _COMPONENT          ACPI_NAMESPACE
 ACPI_MODULE_NAME("nsnames")
 
-/* Local Prototypes */
-static void acpi_ns_normalize_pathname(char *original_path);
-
 /*******************************************************************************
  *
  * FUNCTION:    acpi_ns_get_external_pathname
@@ -30,7 +27,6 @@ static void acpi_ns_normalize_pathname(char *original_path);
  *              for error and debug statements.
  *
  ******************************************************************************/
-
 char *acpi_ns_get_external_pathname(struct acpi_namespace_node *node)
 {
 	char *name_buffer;
@@ -411,7 +407,7 @@ char *acpi_ns_build_prefixed_pathname(union acpi_generic_state *prefix_scope,
  *
  ******************************************************************************/
 
-static void acpi_ns_normalize_pathname(char *original_path)
+void acpi_ns_normalize_pathname(char *original_path)
 {
 	char *input_path = original_path;
 	char *new_path_buffer;
diff --git a/drivers/acpi/acpica/utdecode.c b/drivers/acpi/acpica/utdecode.c
index befdd13..177ab88 100644
--- a/drivers/acpi/acpica/utdecode.c
+++ b/drivers/acpi/acpica/utdecode.c
@@ -78,7 +78,7 @@ const char *acpi_gbl_region_types[ACPI_NUM_PREDEFINED_REGIONS] = {
 	"IPMI",			/* 0x07 */
 	"GeneralPurposeIo",	/* 0x08 */
 	"GenericSerialBus",	/* 0x09 */
-	"PlatformCommChannel"	/* 0x0A */
+	"PCC"			/* 0x0A */
 };
 
 const char *acpi_ut_get_region_name(u8 space_id)
diff --git a/drivers/acpi/acpica/utdelete.c b/drivers/acpi/acpica/utdelete.c
index eee263c..c365faf 100644
--- a/drivers/acpi/acpica/utdelete.c
+++ b/drivers/acpi/acpica/utdelete.c
@@ -452,13 +452,13 @@ acpi_ut_update_ref_count(union acpi_operand_object *object, u32 action)
  *
  * FUNCTION:    acpi_ut_update_object_reference
  *
- * PARAMETERS:  object              - Increment ref count for this object
- *                                    and all sub-objects
+ * PARAMETERS:  object              - Increment or decrement the ref count for
+ *                                    this object and all sub-objects
  *              action              - Either REF_INCREMENT or REF_DECREMENT
  *
  * RETURN:      Status
  *
- * DESCRIPTION: Increment the object reference count
+ * DESCRIPTION: Increment or decrement the object reference count
  *
  * Object references are incremented when:
  * 1) An object is attached to a Node (namespace object)
@@ -492,7 +492,7 @@ acpi_ut_update_object_reference(union acpi_operand_object *object, u16 action)
 		}
 
 		/*
-		 * All sub-objects must have their reference count incremented
+		 * All sub-objects must have their reference count updated
 		 * also. Different object types have different subobjects.
 		 */
 		switch (object->common.type) {
@@ -559,6 +559,7 @@ acpi_ut_update_object_reference(union acpi_operand_object *object, u16 action)
 					break;
 				}
 			}
+
 			next_object = NULL;
 			break;
 
diff --git a/drivers/acpi/acpica/utprint.c b/drivers/acpi/acpica/utprint.c
index a874dac..681c11f 100644
--- a/drivers/acpi/acpica/utprint.c
+++ b/drivers/acpi/acpica/utprint.c
@@ -332,7 +332,12 @@ int vsnprintf(char *string, acpi_size size, const char *format, va_list args)
 	int i;
 
 	pos = string;
-	end = string + size;
+
+	if (size != ACPI_UINT32_MAX) {
+		end = string + size;
+	} else {
+		end = ACPI_CAST_PTR(char, ACPI_UINT32_MAX);
+	}
 
 	for (; *format; ++format) {
 		if (*format != '%') {
diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
index ed3d2d1..7d04424 100644
--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -1015,6 +1015,7 @@ const struct iommu_ops *iort_iommu_configure(struct device *dev)
 		return ops;
 
 	if (dev_is_pci(dev)) {
+		struct iommu_fwspec *fwspec;
 		struct pci_bus *bus = to_pci_dev(dev)->bus;
 		struct iort_pci_alias_info info = { .dev = dev };
 
@@ -1027,8 +1028,9 @@ const struct iommu_ops *iort_iommu_configure(struct device *dev)
 		err = pci_for_each_dma_alias(to_pci_dev(dev),
 					     iort_pci_iommu_init, &info);
 
-		if (!err && iort_pci_rc_supports_ats(node))
-			dev->iommu_fwspec->flags |= IOMMU_FWSPEC_PCI_RC_ATS;
+		fwspec = dev_iommu_fwspec_get(dev);
+		if (fwspec && iort_pci_rc_supports_ats(node))
+			fwspec->flags |= IOMMU_FWSPEC_PCI_RC_ATS;
 	} else {
 		int i = 0;
 
diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c
index a1a858a..8b2e89c 100644
--- a/drivers/acpi/cppc_acpi.c
+++ b/drivers/acpi/cppc_acpi.c
@@ -438,13 +438,10 @@ int acpi_get_psd_map(struct cppc_cpudata **all_cpu_data)
 	 * domain info.
 	 */
 	for_each_possible_cpu(i) {
-		pr = all_cpu_data[i];
-		if (!pr)
-			continue;
-
 		if (cpumask_test_cpu(i, covered_cpus))
 			continue;
 
+		pr = all_cpu_data[i];
 		cpc_ptr = per_cpu(cpc_desc_ptr, i);
 		if (!cpc_ptr) {
 			retval = -EFAULT;
@@ -495,44 +492,28 @@ int acpi_get_psd_map(struct cppc_cpudata **all_cpu_data)
 			cpumask_set_cpu(j, pr->shared_cpu_map);
 		}
 
-		for_each_possible_cpu(j) {
+		for_each_cpu(j, pr->shared_cpu_map) {
 			if (i == j)
 				continue;
 
 			match_pr = all_cpu_data[j];
-			if (!match_pr)
-				continue;
-
-			match_cpc_ptr = per_cpu(cpc_desc_ptr, j);
-			if (!match_cpc_ptr) {
-				retval = -EFAULT;
-				goto err_ret;
-			}
-
-			match_pdomain = &(match_cpc_ptr->domain_info);
-			if (match_pdomain->domain != pdomain->domain)
-				continue;
-
 			match_pr->shared_type = pr->shared_type;
 			cpumask_copy(match_pr->shared_cpu_map,
 				     pr->shared_cpu_map);
 		}
 	}
+	goto out;
 
 err_ret:
 	for_each_possible_cpu(i) {
 		pr = all_cpu_data[i];
-		if (!pr)
-			continue;
 
 		/* Assume no coordination on any error parsing domain info */
-		if (retval) {
-			cpumask_clear(pr->shared_cpu_map);
-			cpumask_set_cpu(i, pr->shared_cpu_map);
-			pr->shared_type = CPUFREQ_SHARED_TYPE_ALL;
-		}
+		cpumask_clear(pr->shared_cpu_map);
+		cpumask_set_cpu(i, pr->shared_cpu_map);
+		pr->shared_type = CPUFREQ_SHARED_TYPE_ALL;
 	}
-
+out:
 	free_cpumask_var(covered_cpus);
 	return retval;
 }
diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c
index b64c62b..b2263ec 100644
--- a/drivers/acpi/device_pm.c
+++ b/drivers/acpi/device_pm.c
@@ -1321,8 +1321,8 @@ int acpi_dev_pm_attach(struct device *dev, bool power_on)
 	 */
 	static const struct acpi_device_id special_pm_ids[] = {
 		{"PNP0C0B", }, /* Generic ACPI fan */
-		{"INT1044", }, /* Fan for Tiger Lake generation */
 		{"INT3404", }, /* Fan */
+		{"INTC1044", }, /* Fan for Tiger Lake generation */
 		{}
 	};
 	struct acpi_device *adev = ACPI_COMPANION(dev);
diff --git a/drivers/acpi/dptf/dptf_power.c b/drivers/acpi/dptf/dptf_power.c
index 387f27e..e4e8b75 100644
--- a/drivers/acpi/dptf/dptf_power.c
+++ b/drivers/acpi/dptf/dptf_power.c
@@ -97,8 +97,8 @@ static int dptf_power_remove(struct platform_device *pdev)
 }
 
 static const struct acpi_device_id int3407_device_ids[] = {
-	{"INT1047", 0},
 	{"INT3407", 0},
+	{"INTC1047", 0},
 	{"", 0},
 };
 MODULE_DEVICE_TABLE(acpi, int3407_device_ids);
diff --git a/drivers/acpi/dptf/int340x_thermal.c b/drivers/acpi/dptf/int340x_thermal.c
index 1ec7b69..bc71a6a 100644
--- a/drivers/acpi/dptf/int340x_thermal.c
+++ b/drivers/acpi/dptf/int340x_thermal.c
@@ -13,10 +13,6 @@
 
 #define INT3401_DEVICE 0X01
 static const struct acpi_device_id int340x_thermal_device_ids[] = {
-	{"INT1040"},
-	{"INT1043"},
-	{"INT1044"},
-	{"INT1047"},
 	{"INT3400"},
 	{"INT3401", INT3401_DEVICE},
 	{"INT3402"},
@@ -28,6 +24,10 @@ static const struct acpi_device_id int340x_thermal_device_ids[] = {
 	{"INT3409"},
 	{"INT340A"},
 	{"INT340B"},
+	{"INTC1040"},
+	{"INTC1043"},
+	{"INTC1044"},
+	{"INTC1047"},
 	{""},
 };
 
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 4816df5..b4c0152e 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -1589,8 +1589,8 @@ static int acpi_ec_add(struct acpi_device *device)
 	strcpy(acpi_device_name(device), ACPI_EC_DEVICE_NAME);
 	strcpy(acpi_device_class(device), ACPI_EC_CLASS);
 
-	if ((boot_ec && boot_ec->handle == device->handle) ||
-	    !strcmp(acpi_device_hid(device), ACPI_ECDT_HID)) {
+	if (boot_ec && (boot_ec->handle == device->handle ||
+	    !strcmp(acpi_device_hid(device), ACPI_ECDT_HID))) {
 		/* Fast path: this device corresponds to the boot EC. */
 		ec = boot_ec;
 	} else {
diff --git a/drivers/acpi/nfit/core.c b/drivers/acpi/nfit/core.c
index a3320f9..fa4500f 100644
--- a/drivers/acpi/nfit/core.c
+++ b/drivers/acpi/nfit/core.c
@@ -360,7 +360,7 @@ static union acpi_object *acpi_label_info(acpi_handle handle)
 
 static u8 nfit_dsm_revid(unsigned family, unsigned func)
 {
-	static const u8 revid_table[NVDIMM_FAMILY_MAX+1][32] = {
+	static const u8 revid_table[NVDIMM_FAMILY_MAX+1][NVDIMM_CMD_MAX+1] = {
 		[NVDIMM_FAMILY_INTEL] = {
 			[NVDIMM_INTEL_GET_MODES] = 2,
 			[NVDIMM_INTEL_GET_FWINFO] = 2,
@@ -386,7 +386,7 @@ static u8 nfit_dsm_revid(unsigned family, unsigned func)
 
 	if (family > NVDIMM_FAMILY_MAX)
 		return 0;
-	if (func > 31)
+	if (func > NVDIMM_CMD_MAX)
 		return 0;
 	id = revid_table[family][func];
 	if (id == 0)
@@ -492,7 +492,8 @@ int acpi_nfit_ctl(struct nvdimm_bus_descriptor *nd_desc, struct nvdimm *nvdimm,
 	 * Check for a valid command.  For ND_CMD_CALL, we also have to
 	 * make sure that the DSM function is supported.
 	 */
-	if (cmd == ND_CMD_CALL && !test_bit(func, &dsm_mask))
+	if (cmd == ND_CMD_CALL &&
+	    (func > NVDIMM_CMD_MAX || !test_bit(func, &dsm_mask)))
 		return -ENOTTY;
 	else if (!test_bit(cmd, &cmd_mask))
 		return -ENOTTY;
@@ -2026,8 +2027,10 @@ static int acpi_nfit_register_dimms(struct acpi_nfit_desc *acpi_desc)
 			continue;
 		}
 
-		if (nfit_mem->bdw && nfit_mem->memdev_pmem)
+		if (nfit_mem->bdw && nfit_mem->memdev_pmem) {
 			set_bit(NDD_ALIASING, &flags);
+			set_bit(NDD_LABELING, &flags);
+		}
 
 		/* collate flags across all memdevs for this dimm */
 		list_for_each_entry(nfit_memdev, &acpi_desc->memdevs, list) {
@@ -3492,7 +3495,8 @@ static int acpi_nfit_clear_to_send(struct nvdimm_bus_descriptor *nd_desc,
 	if (nvdimm && cmd == ND_CMD_CALL &&
 			call_pkg->nd_family == NVDIMM_FAMILY_INTEL) {
 		func = call_pkg->nd_command;
-		if ((1 << func) & NVDIMM_INTEL_SECURITY_CMDMASK)
+		if (func > NVDIMM_CMD_MAX ||
+		    (1 << func) & NVDIMM_INTEL_SECURITY_CMDMASK)
 			return -EOPNOTSUPP;
 	}
 
diff --git a/drivers/acpi/nfit/nfit.h b/drivers/acpi/nfit/nfit.h
index 2424194..f5525f8 100644
--- a/drivers/acpi/nfit/nfit.h
+++ b/drivers/acpi/nfit/nfit.h
@@ -34,6 +34,7 @@
 		| ACPI_NFIT_MEM_NOT_ARMED | ACPI_NFIT_MEM_MAP_FAILED)
 
 #define NVDIMM_FAMILY_MAX NVDIMM_FAMILY_HYPERV
+#define NVDIMM_CMD_MAX 31
 
 #define NVDIMM_STANDARD_CMDMASK \
 (1 << ND_CMD_SMART | 1 << ND_CMD_SMART_THRESHOLD | 1 << ND_CMD_DIMM_FLAGS \
@@ -144,32 +145,32 @@ struct nfit_spa {
 	unsigned long ars_state;
 	u32 clear_err_unit;
 	u32 max_ars;
-	struct acpi_nfit_system_address spa[0];
+	struct acpi_nfit_system_address spa[];
 };
 
 struct nfit_dcr {
 	struct list_head list;
-	struct acpi_nfit_control_region dcr[0];
+	struct acpi_nfit_control_region dcr[];
 };
 
 struct nfit_bdw {
 	struct list_head list;
-	struct acpi_nfit_data_region bdw[0];
+	struct acpi_nfit_data_region bdw[];
 };
 
 struct nfit_idt {
 	struct list_head list;
-	struct acpi_nfit_interleave idt[0];
+	struct acpi_nfit_interleave idt[];
 };
 
 struct nfit_flush {
 	struct list_head list;
-	struct acpi_nfit_flush_address flush[0];
+	struct acpi_nfit_flush_address flush[];
 };
 
 struct nfit_memdev {
 	struct list_head list;
-	struct acpi_nfit_memory_map memdev[0];
+	struct acpi_nfit_memory_map memdev[];
 };
 
 enum nfit_mem_flags {
diff --git a/drivers/acpi/numa/srat.c b/drivers/acpi/numa/srat.c
index eadbf90..47b4969 100644
--- a/drivers/acpi/numa/srat.c
+++ b/drivers/acpi/numa/srat.c
@@ -72,47 +72,6 @@ int acpi_map_pxm_to_node(int pxm)
 }
 EXPORT_SYMBOL(acpi_map_pxm_to_node);
 
-/**
- * acpi_map_pxm_to_online_node - Map proximity ID to online node
- * @pxm: ACPI proximity ID
- *
- * This is similar to acpi_map_pxm_to_node(), but always returns an online
- * node.  When the mapped node from a given proximity ID is offline, it
- * looks up the node distance table and returns the nearest online node.
- *
- * ACPI device drivers, which are called after the NUMA initialization has
- * completed in the kernel, can call this interface to obtain their device
- * NUMA topology from ACPI tables.  Such drivers do not have to deal with
- * offline nodes.  A node may be offline when a device proximity ID is
- * unique, SRAT memory entry does not exist, or NUMA is disabled, ex.
- * "numa=off" on x86.
- */
-int acpi_map_pxm_to_online_node(int pxm)
-{
-	int node, min_node;
-
-	node = acpi_map_pxm_to_node(pxm);
-
-	if (node == NUMA_NO_NODE)
-		node = 0;
-
-	min_node = node;
-	if (!node_online(node)) {
-		int min_dist = INT_MAX, dist, n;
-
-		for_each_online_node(n) {
-			dist = node_distance(node, n);
-			if (dist < min_dist) {
-				min_dist = dist;
-				min_node = n;
-			}
-		}
-	}
-
-	return min_node;
-}
-EXPORT_SYMBOL(acpi_map_pxm_to_online_node);
-
 static void __init
 acpi_table_print_srat_entry(struct acpi_subtable_header *header)
 {
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index f92df25..ac8ad6c 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -131,6 +131,7 @@ static struct pci_osc_bit_struct pci_osc_support_bit[] = {
 	{ OSC_PCI_CLOCK_PM_SUPPORT, "ClockPM" },
 	{ OSC_PCI_SEGMENT_GROUPS_SUPPORT, "Segments" },
 	{ OSC_PCI_MSI_SUPPORT, "MSI" },
+	{ OSC_PCI_EDR_SUPPORT, "EDR" },
 	{ OSC_PCI_HPX_TYPE_3_SUPPORT, "HPX-Type3" },
 };
 
@@ -141,6 +142,7 @@ static struct pci_osc_bit_struct pci_osc_control_bit[] = {
 	{ OSC_PCI_EXPRESS_AER_CONTROL, "AER" },
 	{ OSC_PCI_EXPRESS_CAPABILITY_CONTROL, "PCIeCapability" },
 	{ OSC_PCI_EXPRESS_LTR_CONTROL, "LTR" },
+	{ OSC_PCI_EXPRESS_DPC_CONTROL, "DPC" },
 };
 
 static void decode_osc_bits(struct acpi_pci_root *root, char *msg, u32 word,
@@ -440,6 +442,8 @@ static void negotiate_os_control(struct acpi_pci_root *root, int *no_aspm,
 		support |= OSC_PCI_ASPM_SUPPORT | OSC_PCI_CLOCK_PM_SUPPORT;
 	if (pci_msi_enabled())
 		support |= OSC_PCI_MSI_SUPPORT;
+	if (IS_ENABLED(CONFIG_PCIE_EDR))
+		support |= OSC_PCI_EDR_SUPPORT;
 
 	decode_osc_support(root, "OS supports", support);
 	status = acpi_pci_osc_support(root, support);
@@ -487,6 +491,15 @@ static void negotiate_os_control(struct acpi_pci_root *root, int *no_aspm,
 			control |= OSC_PCI_EXPRESS_AER_CONTROL;
 	}
 
+	/*
+	 * Per the Downstream Port Containment Related Enhancements ECN to
+	 * the PCI Firmware Spec, r3.2, sec 4.5.1, table 4-5,
+	 * OSC_PCI_EXPRESS_DPC_CONTROL indicates the OS supports both DPC
+	 * and EDR.
+	 */
+	if (IS_ENABLED(CONFIG_PCIE_DPC) && IS_ENABLED(CONFIG_PCIE_EDR))
+		control |= OSC_PCI_EXPRESS_DPC_CONTROL;
+
 	requested = control;
 	status = acpi_pci_osc_control_set(handle, &control,
 					  OSC_PCI_EXPRESS_CAPABILITY_CONTROL);
@@ -916,6 +929,8 @@ struct pci_bus *acpi_pci_root_create(struct acpi_pci_root *root,
 		host_bridge->native_pme = 0;
 	if (!(root->osc_control_set & OSC_PCI_EXPRESS_LTR_CONTROL))
 		host_bridge->native_ltr = 0;
+	if (!(root->osc_control_set & OSC_PCI_EXPRESS_DPC_CONTROL))
+		host_bridge->native_dpc = 0;
 
 	/*
 	 * Evaluate the "PCI Boot Configuration" _DSM Function.  If it
diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c
index 532a1ae..a0bd56e 100644
--- a/drivers/acpi/processor_throttling.c
+++ b/drivers/acpi/processor_throttling.c
@@ -897,13 +897,6 @@ static long __acpi_processor_get_throttling(void *data)
 	return pr->throttling.acpi_processor_get_throttling(pr);
 }
 
-static int call_on_cpu(int cpu, long (*fn)(void *), void *arg, bool direct)
-{
-	if (direct || (is_percpu_thread() && cpu == smp_processor_id()))
-		return fn(arg);
-	return work_on_cpu(cpu, fn, arg);
-}
-
 static int acpi_processor_get_throttling(struct acpi_processor *pr)
 {
 	if (!pr)
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index bb1ae40..4edc8a3 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -1009,6 +1009,10 @@ static bool acpi_s2idle_wake(void)
 		if (acpi_any_fixed_event_status_set())
 			return true;
 
+		/* Check wakeups from drivers sharing the SCI. */
+		if (acpi_check_wakeup_handlers())
+			return true;
+
 		/*
 		 * If the status bit is set for any enabled GPE other than the
 		 * EC one, the wakeup is regarded as a genuine one.
diff --git a/drivers/acpi/sleep.h b/drivers/acpi/sleep.h
index 41675d2..3d90480 100644
--- a/drivers/acpi/sleep.h
+++ b/drivers/acpi/sleep.h
@@ -2,6 +2,7 @@
 
 extern void acpi_enable_wakeup_devices(u8 sleep_state);
 extern void acpi_disable_wakeup_devices(u8 sleep_state);
+extern bool acpi_check_wakeup_handlers(void);
 
 extern struct list_head acpi_wakeup_device_list;
 extern struct mutex acpi_device_lock;
diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c
index 180ac43..0e905c3 100644
--- a/drivers/acpi/tables.c
+++ b/drivers/acpi/tables.c
@@ -501,7 +501,7 @@ static const char * const table_sigs[] = {
 	ACPI_SIG_WDDT, ACPI_SIG_WDRT, ACPI_SIG_DSDT, ACPI_SIG_FADT,
 	ACPI_SIG_PSDT, ACPI_SIG_RSDT, ACPI_SIG_XSDT, ACPI_SIG_SSDT,
 	ACPI_SIG_IORT, ACPI_SIG_NFIT, ACPI_SIG_HMAT, ACPI_SIG_PPTT,
-	NULL };
+	ACPI_SIG_NHLT, NULL };
 
 #define ACPI_HEADER_SIZE sizeof(struct acpi_table_header)
 
diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
index 419f814..b4994e5 100644
--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -352,6 +352,15 @@ static const struct dmi_system_id video_detect_dmi_table[] = {
 		DMI_MATCH(DMI_PRODUCT_NAME, "Precision 7510"),
 		},
 	},
+	{
+	 .callback = video_detect_force_native,
+	 .ident = "Acer Aspire 5738z",
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5738"),
+		DMI_MATCH(DMI_BOARD_NAME, "JV50"),
+		},
+	},
 
 	/*
 	 * Desktops which falsely report a backlight and which our heuristics
diff --git a/drivers/acpi/wakeup.c b/drivers/acpi/wakeup.c
index c28244d..0b2e425 100644
--- a/drivers/acpi/wakeup.c
+++ b/drivers/acpi/wakeup.c
@@ -12,6 +12,15 @@
 #include "internal.h"
 #include "sleep.h"
 
+struct acpi_wakeup_handler {
+	struct list_head list_node;
+	bool (*wakeup)(void *context);
+	void *context;
+};
+
+static LIST_HEAD(acpi_wakeup_handler_head);
+static DEFINE_MUTEX(acpi_wakeup_handler_mutex);
+
 /*
  * We didn't lock acpi_device_lock in the file, because it invokes oops in
  * suspend/resume and isn't really required as this is called in S-state. At
@@ -90,3 +99,75 @@ int __init acpi_wakeup_device_init(void)
 	mutex_unlock(&acpi_device_lock);
 	return 0;
 }
+
+/**
+ * acpi_register_wakeup_handler - Register wakeup handler
+ * @wake_irq: The IRQ through which the device may receive wakeups
+ * @wakeup:   Wakeup-handler to call when the SCI has triggered a wakeup
+ * @context:  Context to pass to the handler when calling it
+ *
+ * Drivers which may share an IRQ with the SCI can use this to register
+ * a handler which returns true when the device they are managing wants
+ * to trigger a wakeup.
+ */
+int acpi_register_wakeup_handler(int wake_irq, bool (*wakeup)(void *context),
+				 void *context)
+{
+	struct acpi_wakeup_handler *handler;
+
+	/*
+	 * If the device is not sharing its IRQ with the SCI, there is no
+	 * need to register the handler.
+	 */
+	if (!acpi_sci_irq_valid() || wake_irq != acpi_sci_irq)
+		return 0;
+
+	handler = kmalloc(sizeof(*handler), GFP_KERNEL);
+	if (!handler)
+		return -ENOMEM;
+
+	handler->wakeup = wakeup;
+	handler->context = context;
+
+	mutex_lock(&acpi_wakeup_handler_mutex);
+	list_add(&handler->list_node, &acpi_wakeup_handler_head);
+	mutex_unlock(&acpi_wakeup_handler_mutex);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(acpi_register_wakeup_handler);
+
+/**
+ * acpi_unregister_wakeup_handler - Unregister wakeup handler
+ * @wakeup:   Wakeup-handler passed to acpi_register_wakeup_handler()
+ * @context:  Context passed to acpi_register_wakeup_handler()
+ */
+void acpi_unregister_wakeup_handler(bool (*wakeup)(void *context),
+				    void *context)
+{
+	struct acpi_wakeup_handler *handler;
+
+	mutex_lock(&acpi_wakeup_handler_mutex);
+	list_for_each_entry(handler, &acpi_wakeup_handler_head, list_node) {
+		if (handler->wakeup == wakeup && handler->context == context) {
+			list_del(&handler->list_node);
+			kfree(handler);
+			break;
+		}
+	}
+	mutex_unlock(&acpi_wakeup_handler_mutex);
+}
+EXPORT_SYMBOL_GPL(acpi_unregister_wakeup_handler);
+
+bool acpi_check_wakeup_handlers(void)
+{
+	struct acpi_wakeup_handler *handler;
+
+	/* No need to lock, nothing else is running when we're called. */
+	list_for_each_entry(handler, &acpi_wakeup_handler_head, list_node) {
+		if (handler->wakeup(handler->context))
+			return true;
+	}
+
+	return false;
+}
diff --git a/drivers/android/binderfs.c b/drivers/android/binderfs.c
index f303106..9ecad7418 100644
--- a/drivers/android/binderfs.c
+++ b/drivers/android/binderfs.c
@@ -18,7 +18,7 @@
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/mount.h>
-#include <linux/parser.h>
+#include <linux/fs_parser.h>
 #include <linux/radix-tree.h>
 #include <linux/sched.h>
 #include <linux/seq_file.h>
@@ -48,26 +48,30 @@ static dev_t binderfs_dev;
 static DEFINE_MUTEX(binderfs_minors_mutex);
 static DEFINE_IDA(binderfs_minors);
 
-enum {
+enum binderfs_param {
 	Opt_max,
 	Opt_stats_mode,
-	Opt_err
 };
 
 enum binderfs_stats_mode {
-	STATS_NONE,
-	STATS_GLOBAL,
+	binderfs_stats_mode_unset,
+	binderfs_stats_mode_global,
 };
 
-static const match_table_t tokens = {
-	{ Opt_max, "max=%d" },
-	{ Opt_stats_mode, "stats=%s" },
-	{ Opt_err, NULL     }
+static const struct constant_table binderfs_param_stats[] = {
+	{ "global", binderfs_stats_mode_global },
+	{}
 };
 
-static inline struct binderfs_info *BINDERFS_I(const struct inode *inode)
+const struct fs_parameter_spec binderfs_fs_parameters[] = {
+	fsparam_u32("max",	Opt_max),
+	fsparam_enum("stats",	Opt_stats_mode, binderfs_param_stats),
+	{}
+};
+
+static inline struct binderfs_info *BINDERFS_SB(const struct super_block *sb)
 {
-	return inode->i_sb->s_fs_info;
+	return sb->s_fs_info;
 }
 
 bool is_binderfs_device(const struct inode *inode)
@@ -246,7 +250,7 @@ static long binder_ctl_ioctl(struct file *file, unsigned int cmd,
 static void binderfs_evict_inode(struct inode *inode)
 {
 	struct binder_device *device = inode->i_private;
-	struct binderfs_info *info = BINDERFS_I(inode);
+	struct binderfs_info *info = BINDERFS_SB(inode->i_sb);
 
 	clear_inode(inode);
 
@@ -264,97 +268,84 @@ static void binderfs_evict_inode(struct inode *inode)
 	}
 }
 
-/**
- * binderfs_parse_mount_opts - parse binderfs mount options
- * @data: options to set (can be NULL in which case defaults are used)
- */
-static int binderfs_parse_mount_opts(char *data,
-				     struct binderfs_mount_opts *opts)
+static int binderfs_fs_context_parse_param(struct fs_context *fc,
+					   struct fs_parameter *param)
 {
-	char *p, *stats;
-	opts->max = BINDERFS_MAX_MINOR;
-	opts->stats_mode = STATS_NONE;
+	int opt;
+	struct binderfs_mount_opts *ctx = fc->fs_private;
+	struct fs_parse_result result;
 
-	while ((p = strsep(&data, ",")) != NULL) {
-		substring_t args[MAX_OPT_ARGS];
-		int token;
-		int max_devices;
+	opt = fs_parse(fc, binderfs_fs_parameters, param, &result);
+	if (opt < 0)
+		return opt;
 
-		if (!*p)
-			continue;
+	switch (opt) {
+	case Opt_max:
+		if (result.uint_32 > BINDERFS_MAX_MINOR)
+			return invalfc(fc, "Bad value for '%s'", param->key);
 
-		token = match_token(p, tokens, args);
-		switch (token) {
-		case Opt_max:
-			if (match_int(&args[0], &max_devices) ||
-			    (max_devices < 0 ||
-			     (max_devices > BINDERFS_MAX_MINOR)))
-				return -EINVAL;
+		ctx->max = result.uint_32;
+		break;
+	case Opt_stats_mode:
+		if (!capable(CAP_SYS_ADMIN))
+			return -EPERM;
 
-			opts->max = max_devices;
-			break;
-		case Opt_stats_mode:
-			if (!capable(CAP_SYS_ADMIN))
-				return -EINVAL;
-
-			stats = match_strdup(&args[0]);
-			if (!stats)
-				return -ENOMEM;
-
-			if (strcmp(stats, "global") != 0) {
-				kfree(stats);
-				return -EINVAL;
-			}
-
-			opts->stats_mode = STATS_GLOBAL;
-			kfree(stats);
-			break;
-		default:
-			pr_err("Invalid mount options\n");
-			return -EINVAL;
-		}
+		ctx->stats_mode = result.uint_32;
+		break;
+	default:
+		return invalfc(fc, "Unsupported parameter '%s'", param->key);
 	}
 
 	return 0;
 }
 
-static int binderfs_remount(struct super_block *sb, int *flags, char *data)
+static int binderfs_fs_context_reconfigure(struct fs_context *fc)
 {
-	int prev_stats_mode, ret;
-	struct binderfs_info *info = sb->s_fs_info;
+	struct binderfs_mount_opts *ctx = fc->fs_private;
+	struct binderfs_info *info = BINDERFS_SB(fc->root->d_sb);
 
-	prev_stats_mode = info->mount_opts.stats_mode;
-	ret = binderfs_parse_mount_opts(data, &info->mount_opts);
-	if (ret)
-		return ret;
+	if (info->mount_opts.stats_mode != ctx->stats_mode)
+		return invalfc(fc, "Binderfs stats mode cannot be changed during a remount");
 
-	if (prev_stats_mode != info->mount_opts.stats_mode) {
-		pr_err("Binderfs stats mode cannot be changed during a remount\n");
-		info->mount_opts.stats_mode = prev_stats_mode;
-		return -EINVAL;
-	}
-
+	info->mount_opts.stats_mode = ctx->stats_mode;
+	info->mount_opts.max = ctx->max;
 	return 0;
 }
 
-static int binderfs_show_mount_opts(struct seq_file *seq, struct dentry *root)
+static int binderfs_show_options(struct seq_file *seq, struct dentry *root)
 {
-	struct binderfs_info *info;
+	struct binderfs_info *info = BINDERFS_SB(root->d_sb);
 
-	info = root->d_sb->s_fs_info;
 	if (info->mount_opts.max <= BINDERFS_MAX_MINOR)
 		seq_printf(seq, ",max=%d", info->mount_opts.max);
-	if (info->mount_opts.stats_mode == STATS_GLOBAL)
+
+	switch (info->mount_opts.stats_mode) {
+	case binderfs_stats_mode_unset:
+		break;
+	case binderfs_stats_mode_global:
 		seq_printf(seq, ",stats=global");
+		break;
+	}
 
 	return 0;
 }
 
+static void binderfs_put_super(struct super_block *sb)
+{
+	struct binderfs_info *info = sb->s_fs_info;
+
+	if (info && info->ipc_ns)
+		put_ipc_ns(info->ipc_ns);
+
+	kfree(info);
+	sb->s_fs_info = NULL;
+}
+
 static const struct super_operations binderfs_super_ops = {
 	.evict_inode    = binderfs_evict_inode,
-	.remount_fs	= binderfs_remount,
-	.show_options	= binderfs_show_mount_opts,
+	.show_options	= binderfs_show_options,
 	.statfs         = simple_statfs,
+	.put_super	= binderfs_put_super,
 };
 
 static inline bool is_binderfs_control_device(const struct dentry *dentry)
@@ -653,10 +644,11 @@ static int init_binder_logs(struct super_block *sb)
 	return ret;
 }
 
-static int binderfs_fill_super(struct super_block *sb, void *data, int silent)
+static int binderfs_fill_super(struct super_block *sb, struct fs_context *fc)
 {
 	int ret;
 	struct binderfs_info *info;
+	struct binderfs_mount_opts *ctx = fc->fs_private;
 	struct inode *inode = NULL;
 	struct binderfs_device device_info = { 0 };
 	const char *name;
@@ -689,16 +681,14 @@ static int binderfs_fill_super(struct super_block *sb, void *data, int silent)
 
 	info->ipc_ns = get_ipc_ns(current->nsproxy->ipc_ns);
 
-	ret = binderfs_parse_mount_opts(data, &info->mount_opts);
-	if (ret)
-		return ret;
-
 	info->root_gid = make_kgid(sb->s_user_ns, 0);
 	if (!gid_valid(info->root_gid))
 		info->root_gid = GLOBAL_ROOT_GID;
 	info->root_uid = make_kuid(sb->s_user_ns, 0);
 	if (!uid_valid(info->root_uid))
 		info->root_uid = GLOBAL_ROOT_UID;
+	info->mount_opts.max = ctx->max;
+	info->mount_opts.stats_mode = ctx->stats_mode;
 
 	inode = new_inode(sb);
 	if (!inode)
@@ -730,36 +720,54 @@ static int binderfs_fill_super(struct super_block *sb, void *data, int silent)
 			name++;
 	}
 
-	if (info->mount_opts.stats_mode == STATS_GLOBAL)
+	if (info->mount_opts.stats_mode == binderfs_stats_mode_global)
 		return init_binder_logs(sb);
 
 	return 0;
 }
 
-static struct dentry *binderfs_mount(struct file_system_type *fs_type,
-				     int flags, const char *dev_name,
-				     void *data)
+static int binderfs_fs_context_get_tree(struct fs_context *fc)
 {
-	return mount_nodev(fs_type, flags, data, binderfs_fill_super);
+	return get_tree_nodev(fc, binderfs_fill_super);
 }
 
-static void binderfs_kill_super(struct super_block *sb)
+static void binderfs_fs_context_free(struct fs_context *fc)
 {
-	struct binderfs_info *info = sb->s_fs_info;
+	struct binderfs_mount_opts *ctx = fc->fs_private;
 
-	kill_litter_super(sb);
+	kfree(ctx);
+}
 
-	if (info && info->ipc_ns)
-		put_ipc_ns(info->ipc_ns);
+static const struct fs_context_operations binderfs_fs_context_ops = {
+	.free		= binderfs_fs_context_free,
+	.get_tree	= binderfs_fs_context_get_tree,
+	.parse_param	= binderfs_fs_context_parse_param,
+	.reconfigure	= binderfs_fs_context_reconfigure,
+};
 
-	kfree(info);
+static int binderfs_init_fs_context(struct fs_context *fc)
+{
+	struct binderfs_mount_opts *ctx = fc->fs_private;
+
+	ctx = kzalloc(sizeof(struct binderfs_mount_opts), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	ctx->max = BINDERFS_MAX_MINOR;
+	ctx->stats_mode = binderfs_stats_mode_unset;
+
+	fc->fs_private = ctx;
+	fc->ops = &binderfs_fs_context_ops;
+
+	return 0;
 }
 
 static struct file_system_type binder_fs_type = {
-	.name		= "binder",
-	.mount		= binderfs_mount,
-	.kill_sb	= binderfs_kill_super,
-	.fs_flags	= FS_USERNS_MOUNT,
+	.name			= "binder",
+	.init_fs_context	= binderfs_init_fs_context,
+	.parameters		= binderfs_fs_parameters,
+	.kill_sb		= kill_litter_super,
+	.fs_flags		= FS_USERNS_MOUNT,
 };
 
 int __init init_binderfs(void)
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index ad0185c..0c0a736 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -410,6 +410,8 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, 0x22a3), board_ahci_mobile }, /* Cherry Tr. AHCI */
 	{ PCI_VDEVICE(INTEL, 0x5ae3), board_ahci_mobile }, /* ApolloLake AHCI */
 	{ PCI_VDEVICE(INTEL, 0x34d3), board_ahci_mobile }, /* Ice Lake LP AHCI */
+	{ PCI_VDEVICE(INTEL, 0x02d3), board_ahci_mobile }, /* Comet Lake PCH-U AHCI */
+	{ PCI_VDEVICE(INTEL, 0x02d7), board_ahci_mobile }, /* Comet Lake PCH RAID */
 
 	/* JMicron 360/1/3/5/6, match class to avoid IDE function */
 	{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
@@ -1495,7 +1497,7 @@ static irqreturn_t ahci_thunderx_irq_handler(int irq, void *dev_instance)
 static void ahci_remap_check(struct pci_dev *pdev, int bar,
 		struct ahci_host_priv *hpriv)
 {
-	int i, count = 0;
+	int i;
 	u32 cap;
 
 	/*
@@ -1516,13 +1518,14 @@ static void ahci_remap_check(struct pci_dev *pdev, int bar,
 			continue;
 
 		/* We've found a remapped device */
-		count++;
+		hpriv->remapped_nvme++;
 	}
 
-	if (!count)
+	if (!hpriv->remapped_nvme)
 		return;
 
-	dev_warn(&pdev->dev, "Found %d remapped NVMe devices.\n", count);
+	dev_warn(&pdev->dev, "Found %u remapped NVMe devices.\n",
+		 hpriv->remapped_nvme);
 	dev_warn(&pdev->dev,
 		 "Switch your BIOS from RAID to AHCI mode to use them.\n");
 
@@ -1642,6 +1645,18 @@ static void ahci_intel_pcs_quirk(struct pci_dev *pdev, struct ahci_host_priv *hp
 	}
 }
 
+static ssize_t remapped_nvme_show(struct device *dev,
+				  struct device_attribute *attr,
+				  char *buf)
+{
+	struct ata_host *host = dev_get_drvdata(dev);
+	struct ahci_host_priv *hpriv = host->private_data;
+
+	return sprintf(buf, "%u\n", hpriv->remapped_nvme);
+}
+
+static DEVICE_ATTR_RO(remapped_nvme);
+
 static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	unsigned int board_id = ent->driver_data;
@@ -1745,6 +1760,10 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	/* detect remapped nvme devices */
 	ahci_remap_check(pdev, ahci_pci_bar, hpriv);
 
+	sysfs_add_file_to_group(&pdev->dev.kobj,
+				&dev_attr_remapped_nvme.attr,
+				NULL);
+
 	/* must set flag prior to save config in order to take effect */
 	if (ahci_broken_devslp(pdev))
 		hpriv->flags |= AHCI_HFLAG_NO_DEVSLP;
@@ -1896,6 +1915,9 @@ static void ahci_shutdown_one(struct pci_dev *pdev)
 
 static void ahci_remove_one(struct pci_dev *pdev)
 {
+	sysfs_remove_file_from_group(&pdev->dev.kobj,
+				     &dev_attr_remapped_nvme.attr,
+				     NULL);
 	pm_runtime_get_noresume(&pdev->dev);
 	ata_pci_remove_one(pdev);
 }
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 3dbf398..d991dd4 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -336,6 +336,7 @@ struct ahci_host_priv {
 	u32 			em_loc; /* enclosure management location */
 	u32			em_buf_sz;	/* EM buffer size in byte */
 	u32			em_msg_type;	/* EM message type */
+	u32			remapped_nvme;	/* NVMe remapped device count */
 	bool			got_runtime_pm; /* Did we do pm_runtime_get? */
 	struct clk		*clks[AHCI_MAX_CLKS]; /* Optional */
 	struct reset_control	*rsts;		/* Optional */
diff --git a/drivers/ata/ahci_imx.c b/drivers/ata/ahci_imx.c
index 948d2c6..388baf5 100644
--- a/drivers/ata/ahci_imx.c
+++ b/drivers/ata/ahci_imx.c
@@ -782,7 +782,7 @@ static int ahci_imx_softreset(struct ata_link *link, unsigned int *class,
 	struct ata_host *host = dev_get_drvdata(ap->dev);
 	struct ahci_host_priv *hpriv = host->private_data;
 	struct imx_ahci_priv *imxpriv = hpriv->plat_data;
-	int ret = -EIO;
+	int ret;
 
 	if (imxpriv->type == AHCI_IMX53)
 		ret = ahci_pmp_retry_srst_ops.softreset(link, class, deadline);
diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index 3ff1407..79f2aee 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -763,6 +763,7 @@ static int sata_pmp_eh_recover_pmp(struct ata_port *ap,
 
 	if (dev->flags & ATA_DFLAG_DETACH) {
 		detach = 1;
+		rc = -ENODEV;
 		goto fail;
 	}
 
diff --git a/drivers/atm/.gitignore b/drivers/atm/.gitignore
index fc0ae5e..ddd374e 100644
--- a/drivers/atm/.gitignore
+++ b/drivers/atm/.gitignore
@@ -1,4 +1,4 @@
-# Ignore generated files
+# SPDX-License-Identifier: GPL-2.0-only
 fore200e_mkfirm
 fore200e_pca_fw.c
 pca200e.bin
diff --git a/drivers/auxdisplay/charlcd.c b/drivers/auxdisplay/charlcd.c
index c0da382..d58278a 100644
--- a/drivers/auxdisplay/charlcd.c
+++ b/drivers/auxdisplay/charlcd.c
@@ -22,8 +22,6 @@
 
 #include "charlcd.h"
 
-#define LCD_MINOR		156
-
 #define DEFAULT_LCD_BWIDTH      40
 #define DEFAULT_LCD_HWIDTH      64
 
diff --git a/drivers/auxdisplay/panel.c b/drivers/auxdisplay/panel.c
index 85965953..99980aa 100644
--- a/drivers/auxdisplay/panel.c
+++ b/drivers/auxdisplay/panel.c
@@ -57,8 +57,6 @@
 
 #include "charlcd.h"
 
-#define KEYPAD_MINOR		185
-
 #define LCD_MAXBYTES		256	/* max burst write */
 
 #define KEYPAD_BUFFER		64
diff --git a/drivers/base/memory.c b/drivers/base/memory.c
index 4086718..dbec3a0 100644
--- a/drivers/base/memory.c
+++ b/drivers/base/memory.c
@@ -27,6 +27,24 @@
 
 #define MEMORY_CLASS_NAME	"memory"
 
+static const char *const online_type_to_str[] = {
+	[MMOP_OFFLINE] = "offline",
+	[MMOP_ONLINE] = "online",
+	[MMOP_ONLINE_KERNEL] = "online_kernel",
+	[MMOP_ONLINE_MOVABLE] = "online_movable",
+};
+
+int memhp_online_type_from_str(const char *str)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(online_type_to_str); i++) {
+		if (sysfs_streq(str, online_type_to_str[i]))
+			return i;
+	}
+	return -EINVAL;
+}
+
 #define to_memory_block(dev) container_of(dev, struct memory_block, dev)
 
 static int sections_per_block;
@@ -145,45 +163,6 @@ int memory_notify(unsigned long val, void *v)
 }
 
 /*
- * The probe routines leave the pages uninitialized, just as the bootmem code
- * does. Make sure we do not access them, but instead use only information from
- * within sections.
- */
-static bool pages_correctly_probed(unsigned long start_pfn)
-{
-	unsigned long section_nr = pfn_to_section_nr(start_pfn);
-	unsigned long section_nr_end = section_nr + sections_per_block;
-	unsigned long pfn = start_pfn;
-
-	/*
-	 * memmap between sections is not contiguous except with
-	 * SPARSEMEM_VMEMMAP. We lookup the page once per section
-	 * and assume memmap is contiguous within each section
-	 */
-	for (; section_nr < section_nr_end; section_nr++) {
-		if (WARN_ON_ONCE(!pfn_valid(pfn)))
-			return false;
-
-		if (!present_section_nr(section_nr)) {
-			pr_warn("section %ld pfn[%lx, %lx) not present\n",
-				section_nr, pfn, pfn + PAGES_PER_SECTION);
-			return false;
-		} else if (!valid_section_nr(section_nr)) {
-			pr_warn("section %ld pfn[%lx, %lx) no valid memmap\n",
-				section_nr, pfn, pfn + PAGES_PER_SECTION);
-			return false;
-		} else if (online_section_nr(section_nr)) {
-			pr_warn("section %ld pfn[%lx, %lx) is already online\n",
-				section_nr, pfn, pfn + PAGES_PER_SECTION);
-			return false;
-		}
-		pfn += PAGES_PER_SECTION;
-	}
-
-	return true;
-}
-
-/*
  * MEMORY_HOTPLUG depends on SPARSEMEM in mm/Kconfig, so it is
  * OK to have direct references to sparsemem variables in here.
  */
@@ -199,9 +178,6 @@ memory_block_action(unsigned long start_section_nr, unsigned long action,
 
 	switch (action) {
 	case MEM_ONLINE:
-		if (!pages_correctly_probed(start_pfn))
-			return -EBUSY;
-
 		ret = online_pages(start_pfn, nr_pages, online_type, nid);
 		break;
 	case MEM_OFFLINE:
@@ -245,17 +221,14 @@ static int memory_subsys_online(struct device *dev)
 		return 0;
 
 	/*
-	 * If we are called from state_store(), online_type will be
-	 * set >= 0 Otherwise we were called from the device online
-	 * attribute and need to set the online_type.
+	 * When called via device_online() without configuring the online_type,
+	 * we want to default to MMOP_ONLINE.
 	 */
-	if (mem->online_type < 0)
-		mem->online_type = MMOP_ONLINE_KEEP;
+	if (mem->online_type == MMOP_OFFLINE)
+		mem->online_type = MMOP_ONLINE;
 
 	ret = memory_block_change_state(mem, MEM_ONLINE, MEM_OFFLINE);
-
-	/* clear online_type */
-	mem->online_type = -1;
+	mem->online_type = MMOP_OFFLINE;
 
 	return ret;
 }
@@ -267,40 +240,27 @@ static int memory_subsys_offline(struct device *dev)
 	if (mem->state == MEM_OFFLINE)
 		return 0;
 
-	/* Can't offline block with non-present sections */
-	if (mem->section_count != sections_per_block)
-		return -EINVAL;
-
 	return memory_block_change_state(mem, MEM_OFFLINE, MEM_ONLINE);
 }
 
 static ssize_t state_store(struct device *dev, struct device_attribute *attr,
 			   const char *buf, size_t count)
 {
+	const int online_type = memhp_online_type_from_str(buf);
 	struct memory_block *mem = to_memory_block(dev);
-	int ret, online_type;
+	int ret;
+
+	if (online_type < 0)
+		return -EINVAL;
 
 	ret = lock_device_hotplug_sysfs();
 	if (ret)
 		return ret;
 
-	if (sysfs_streq(buf, "online_kernel"))
-		online_type = MMOP_ONLINE_KERNEL;
-	else if (sysfs_streq(buf, "online_movable"))
-		online_type = MMOP_ONLINE_MOVABLE;
-	else if (sysfs_streq(buf, "online"))
-		online_type = MMOP_ONLINE_KEEP;
-	else if (sysfs_streq(buf, "offline"))
-		online_type = MMOP_OFFLINE;
-	else {
-		ret = -EINVAL;
-		goto err;
-	}
-
 	switch (online_type) {
 	case MMOP_ONLINE_KERNEL:
 	case MMOP_ONLINE_MOVABLE:
-	case MMOP_ONLINE_KEEP:
+	case MMOP_ONLINE:
 		/* mem->online_type is protected by device_hotplug_lock */
 		mem->online_type = online_type;
 		ret = device_online(&mem->dev);
@@ -312,7 +272,6 @@ static ssize_t state_store(struct device *dev, struct device_attribute *attr,
 		ret = -EINVAL; /* should never happen */
 	}
 
-err:
 	unlock_device_hotplug();
 
 	if (ret < 0)
@@ -380,7 +339,8 @@ static ssize_t valid_zones_show(struct device *dev,
 	}
 
 	nid = mem->nid;
-	default_zone = zone_for_pfn_range(MMOP_ONLINE_KEEP, nid, start_pfn, nr_pages);
+	default_zone = zone_for_pfn_range(MMOP_ONLINE, nid, start_pfn,
+					  nr_pages);
 	strcat(buf, default_zone->name);
 
 	print_allowed_zone(buf, nid, start_pfn, nr_pages, MMOP_ONLINE_KERNEL,
@@ -418,23 +378,20 @@ static DEVICE_ATTR_RO(block_size_bytes);
 static ssize_t auto_online_blocks_show(struct device *dev,
 				       struct device_attribute *attr, char *buf)
 {
-	if (memhp_auto_online)
-		return sprintf(buf, "online\n");
-	else
-		return sprintf(buf, "offline\n");
+	return sprintf(buf, "%s\n",
+		       online_type_to_str[memhp_default_online_type]);
 }
 
 static ssize_t auto_online_blocks_store(struct device *dev,
 					struct device_attribute *attr,
 					const char *buf, size_t count)
 {
-	if (sysfs_streq(buf, "online"))
-		memhp_auto_online = true;
-	else if (sysfs_streq(buf, "offline"))
-		memhp_auto_online = false;
-	else
+	const int online_type = memhp_online_type_from_str(buf);
+
+	if (online_type < 0)
 		return -EINVAL;
 
+	memhp_default_online_type = online_type;
 	return count;
 }
 
@@ -627,7 +584,7 @@ static int init_memory_block(struct memory_block **memory,
 
 static int add_memory_block(unsigned long base_section_nr)
 {
-	int ret, section_count = 0;
+	int section_count = 0;
 	struct memory_block *mem;
 	unsigned long nr;
 
@@ -638,12 +595,8 @@ static int add_memory_block(unsigned long base_section_nr)
 
 	if (section_count == 0)
 		return 0;
-	ret = init_memory_block(&mem, base_memory_block_id(base_section_nr),
-				MEM_ONLINE);
-	if (ret)
-		return ret;
-	mem->section_count = section_count;
-	return 0;
+	return init_memory_block(&mem, base_memory_block_id(base_section_nr),
+				 MEM_ONLINE);
 }
 
 static void unregister_memory(struct memory_block *memory)
@@ -679,7 +632,6 @@ int create_memory_block_devices(unsigned long start, unsigned long size)
 		ret = init_memory_block(&mem, block_id, MEM_OFFLINE);
 		if (ret)
 			break;
-		mem->section_count = sections_per_block;
 	}
 	if (ret) {
 		end_block_id = block_id;
@@ -688,7 +640,6 @@ int create_memory_block_devices(unsigned long start, unsigned long size)
 			mem = find_memory_block_by_id(block_id);
 			if (WARN_ON_ONCE(!mem))
 				continue;
-			mem->section_count = 0;
 			unregister_memory(mem);
 		}
 	}
@@ -717,7 +668,6 @@ void remove_memory_block_devices(unsigned long start, unsigned long size)
 		mem = find_memory_block_by_id(block_id);
 		if (WARN_ON_ONCE(!mem))
 			continue;
-		mem->section_count = 0;
 		unregister_memory_block_under_nodes(mem);
 		unregister_memory(mem);
 	}
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 6d1dee7..fdd508a7 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -1922,10 +1922,6 @@ static int device_prepare(struct device *dev, pm_message_t state)
 	if (dev->power.syscore)
 		return 0;
 
-	WARN_ON(!pm_runtime_enabled(dev) &&
-		dev_pm_test_driver_flags(dev, DPM_FLAG_SMART_SUSPEND |
-					      DPM_FLAG_LEAVE_SUSPENDED));
-
 	/*
 	 * If a device's parent goes into runtime suspend at the wrong time,
 	 * it won't be possible to resume the device.  To prevent this we
@@ -1973,8 +1969,7 @@ static int device_prepare(struct device *dev, pm_message_t state)
 	 */
 	spin_lock_irq(&dev->power.lock);
 	dev->power.direct_complete = state.event == PM_EVENT_SUSPEND &&
-		((pm_runtime_suspended(dev) && ret > 0) ||
-		 dev->power.no_pm_callbacks) &&
+		(ret > 0 || dev->power.no_pm_callbacks) &&
 		!dev_pm_test_driver_flags(dev, DPM_FLAG_NEVER_SKIP);
 	spin_unlock_irq(&dev->power.lock);
 	return 0;
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index a42c49e..da693e6 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -429,11 +429,12 @@ static int lo_fallocate(struct loop_device *lo, struct request *rq, loff_t pos,
 	 * information.
 	 */
 	struct file *file = lo->lo_backing_file;
+	struct request_queue *q = lo->lo_queue;
 	int ret;
 
 	mode |= FALLOC_FL_KEEP_SIZE;
 
-	if ((!file->f_op->fallocate) || lo->lo_encrypt_key_size) {
+	if (!blk_queue_discard(q)) {
 		ret = -EOPNOTSUPP;
 		goto out;
 	}
@@ -463,7 +464,7 @@ static void lo_complete_rq(struct request *rq)
 	if (!cmd->use_aio || cmd->ret < 0 || cmd->ret == blk_rq_bytes(rq) ||
 	    req_op(rq) != REQ_OP_READ) {
 		if (cmd->ret < 0)
-			ret = BLK_STS_IOERR;
+			ret = errno_to_blk_status(cmd->ret);
 		goto end_io;
 	}
 
@@ -868,27 +869,46 @@ static void loop_config_discard(struct loop_device *lo)
 	struct request_queue *q = lo->lo_queue;
 
 	/*
+	 * If the backing device is a block device, mirror its zeroing
+	 * capability. Set the discard sectors to the block device's zeroing
+	 * capabilities because loop discards result in blkdev_issue_zeroout(),
+	 * not blkdev_issue_discard(). This maintains consistent behavior with
+	 * file-backed loop devices: discarded regions read back as zero.
+	 */
+	if (S_ISBLK(inode->i_mode) && !lo->lo_encrypt_key_size) {
+		struct request_queue *backingq;
+
+		backingq = bdev_get_queue(inode->i_bdev);
+		blk_queue_max_discard_sectors(q,
+			backingq->limits.max_write_zeroes_sectors);
+
+		blk_queue_max_write_zeroes_sectors(q,
+			backingq->limits.max_write_zeroes_sectors);
+
+	/*
 	 * We use punch hole to reclaim the free space used by the
 	 * image a.k.a. discard. However we do not support discard if
 	 * encryption is enabled, because it may give an attacker
 	 * useful information.
 	 */
-	if ((!file->f_op->fallocate) ||
-	    lo->lo_encrypt_key_size) {
+	} else if (!file->f_op->fallocate || lo->lo_encrypt_key_size) {
 		q->limits.discard_granularity = 0;
 		q->limits.discard_alignment = 0;
 		blk_queue_max_discard_sectors(q, 0);
 		blk_queue_max_write_zeroes_sectors(q, 0);
-		blk_queue_flag_clear(QUEUE_FLAG_DISCARD, q);
-		return;
+
+	} else {
+		q->limits.discard_granularity = inode->i_sb->s_blocksize;
+		q->limits.discard_alignment = 0;
+
+		blk_queue_max_discard_sectors(q, UINT_MAX >> 9);
+		blk_queue_max_write_zeroes_sectors(q, UINT_MAX >> 9);
 	}
 
-	q->limits.discard_granularity = inode->i_sb->s_blocksize;
-	q->limits.discard_alignment = 0;
-
-	blk_queue_max_discard_sectors(q, UINT_MAX >> 9);
-	blk_queue_max_write_zeroes_sectors(q, UINT_MAX >> 9);
-	blk_queue_flag_set(QUEUE_FLAG_DISCARD, q);
+	if (q->limits.max_write_zeroes_sectors)
+		blk_queue_flag_set(QUEUE_FLAG_DISCARD, q);
+	else
+		blk_queue_flag_clear(QUEUE_FLAG_DISCARD, q);
 }
 
 static void loop_unprepare_queue(struct loop_device *lo)
@@ -1955,7 +1975,10 @@ static void loop_handle_cmd(struct loop_cmd *cmd)
  failed:
 	/* complete non-aio request */
 	if (!cmd->use_aio || ret) {
-		cmd->ret = ret ? -EIO : 0;
+		if (ret == -EOPNOTSUPP)
+			cmd->ret = ret;
+		else
+			cmd->ret = ret ? -EIO : 0;
 		blk_mq_complete_request(rq);
 	}
 }
diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c
index 6343402..67d65ac 100644
--- a/drivers/block/rbd.c
+++ b/drivers/block/rbd.c
@@ -337,10 +337,7 @@ struct rbd_img_request {
 		u64			snap_id;	/* for reads */
 		struct ceph_snap_context *snapc;	/* for writes */
 	};
-	union {
-		struct request		*rq;		/* block request */
-		struct rbd_obj_request	*obj_request;	/* obj req initiator */
-	};
+	struct rbd_obj_request	*obj_request;	/* obj req initiator */
 
 	struct list_head	lock_item;
 	struct list_head	object_extents;	/* obj_req.ex structs */
@@ -349,7 +346,6 @@ struct rbd_img_request {
 	struct pending_result	pending;
 	struct work_struct	work;
 	int			work_result;
-	struct kref		kref;
 };
 
 #define for_each_obj_request(ireq, oreq) \
@@ -1320,15 +1316,6 @@ static void rbd_obj_request_put(struct rbd_obj_request *obj_request)
 	kref_put(&obj_request->kref, rbd_obj_request_destroy);
 }
 
-static void rbd_img_request_destroy(struct kref *kref);
-static void rbd_img_request_put(struct rbd_img_request *img_request)
-{
-	rbd_assert(img_request != NULL);
-	dout("%s: img %p (was %d)\n", __func__, img_request,
-		kref_read(&img_request->kref));
-	kref_put(&img_request->kref, rbd_img_request_destroy);
-}
-
 static inline void rbd_img_obj_request_add(struct rbd_img_request *img_request,
 					struct rbd_obj_request *obj_request)
 {
@@ -1366,18 +1353,10 @@ static void rbd_osd_submit(struct ceph_osd_request *osd_req)
 static void img_request_layered_set(struct rbd_img_request *img_request)
 {
 	set_bit(IMG_REQ_LAYERED, &img_request->flags);
-	smp_mb();
-}
-
-static void img_request_layered_clear(struct rbd_img_request *img_request)
-{
-	clear_bit(IMG_REQ_LAYERED, &img_request->flags);
-	smp_mb();
 }
 
 static bool img_request_layered_test(struct rbd_img_request *img_request)
 {
-	smp_mb();
 	return test_bit(IMG_REQ_LAYERED, &img_request->flags) != 0;
 }
 
@@ -1619,10 +1598,8 @@ static bool rbd_dev_parent_get(struct rbd_device *rbd_dev)
 	if (!rbd_dev->parent_spec)
 		return false;
 
-	down_read(&rbd_dev->header_rwsem);
 	if (rbd_dev->parent_overlap)
 		counter = atomic_inc_return_safe(&rbd_dev->parent_ref);
-	up_read(&rbd_dev->header_rwsem);
 
 	if (counter < 0)
 		rbd_warn(rbd_dev, "parent reference overflow");
@@ -1630,63 +1607,54 @@ static bool rbd_dev_parent_get(struct rbd_device *rbd_dev)
 	return counter > 0;
 }
 
-/*
- * Caller is responsible for filling in the list of object requests
- * that comprises the image request, and the Linux request pointer
- * (if there is one).
- */
-static struct rbd_img_request *rbd_img_request_create(
-					struct rbd_device *rbd_dev,
-					enum obj_operation_type op_type,
-					struct ceph_snap_context *snapc)
+static void rbd_img_request_init(struct rbd_img_request *img_request,
+				 struct rbd_device *rbd_dev,
+				 enum obj_operation_type op_type)
 {
-	struct rbd_img_request *img_request;
-
-	img_request = kmem_cache_zalloc(rbd_img_request_cache, GFP_NOIO);
-	if (!img_request)
-		return NULL;
+	memset(img_request, 0, sizeof(*img_request));
 
 	img_request->rbd_dev = rbd_dev;
 	img_request->op_type = op_type;
-	if (!rbd_img_is_write(img_request))
-		img_request->snap_id = rbd_dev->spec->snap_id;
-	else
-		img_request->snapc = snapc;
-
-	if (rbd_dev_parent_get(rbd_dev))
-		img_request_layered_set(img_request);
 
 	INIT_LIST_HEAD(&img_request->lock_item);
 	INIT_LIST_HEAD(&img_request->object_extents);
 	mutex_init(&img_request->state_mutex);
-	kref_init(&img_request->kref);
-
-	return img_request;
 }
 
-static void rbd_img_request_destroy(struct kref *kref)
+static void rbd_img_capture_header(struct rbd_img_request *img_req)
 {
-	struct rbd_img_request *img_request;
+	struct rbd_device *rbd_dev = img_req->rbd_dev;
+
+	lockdep_assert_held(&rbd_dev->header_rwsem);
+
+	if (rbd_img_is_write(img_req))
+		img_req->snapc = ceph_get_snap_context(rbd_dev->header.snapc);
+	else
+		img_req->snap_id = rbd_dev->spec->snap_id;
+
+	if (rbd_dev_parent_get(rbd_dev))
+		img_request_layered_set(img_req);
+}
+
+static void rbd_img_request_destroy(struct rbd_img_request *img_request)
+{
 	struct rbd_obj_request *obj_request;
 	struct rbd_obj_request *next_obj_request;
 
-	img_request = container_of(kref, struct rbd_img_request, kref);
-
 	dout("%s: img %p\n", __func__, img_request);
 
 	WARN_ON(!list_empty(&img_request->lock_item));
 	for_each_obj_request_safe(img_request, obj_request, next_obj_request)
 		rbd_img_obj_request_del(img_request, obj_request);
 
-	if (img_request_layered_test(img_request)) {
-		img_request_layered_clear(img_request);
+	if (img_request_layered_test(img_request))
 		rbd_dev_parent_put(img_request->rbd_dev);
-	}
 
 	if (rbd_img_is_write(img_request))
 		ceph_put_snap_context(img_request->snapc);
 
-	kmem_cache_free(rbd_img_request_cache, img_request);
+	if (test_bit(IMG_REQ_CHILD, &img_request->flags))
+		kmem_cache_free(rbd_img_request_cache, img_request);
 }
 
 #define BITS_PER_OBJ	2
@@ -2849,17 +2817,22 @@ static int rbd_obj_read_object(struct rbd_obj_request *obj_req)
 static int rbd_obj_read_from_parent(struct rbd_obj_request *obj_req)
 {
 	struct rbd_img_request *img_req = obj_req->img_request;
+	struct rbd_device *parent = img_req->rbd_dev->parent;
 	struct rbd_img_request *child_img_req;
 	int ret;
 
-	child_img_req = rbd_img_request_create(img_req->rbd_dev->parent,
-					       OBJ_OP_READ, NULL);
+	child_img_req = kmem_cache_alloc(rbd_img_request_cache, GFP_NOIO);
 	if (!child_img_req)
 		return -ENOMEM;
 
+	rbd_img_request_init(child_img_req, parent, OBJ_OP_READ);
 	__set_bit(IMG_REQ_CHILD, &child_img_req->flags);
 	child_img_req->obj_request = obj_req;
 
+	down_read(&parent->header_rwsem);
+	rbd_img_capture_header(child_img_req);
+	up_read(&parent->header_rwsem);
+
 	dout("%s child_img_req %p for obj_req %p\n", __func__, child_img_req,
 	     obj_req);
 
@@ -2888,7 +2861,7 @@ static int rbd_obj_read_from_parent(struct rbd_obj_request *obj_req)
 					      obj_req->copyup_bvecs);
 	}
 	if (ret) {
-		rbd_img_request_put(child_img_req);
+		rbd_img_request_destroy(child_img_req);
 		return ret;
 	}
 
@@ -3647,15 +3620,15 @@ static void rbd_img_handle_request(struct rbd_img_request *img_req, int result)
 	if (test_bit(IMG_REQ_CHILD, &img_req->flags)) {
 		struct rbd_obj_request *obj_req = img_req->obj_request;
 
-		rbd_img_request_put(img_req);
+		rbd_img_request_destroy(img_req);
 		if (__rbd_obj_handle_request(obj_req, &result)) {
 			img_req = obj_req->img_request;
 			goto again;
 		}
 	} else {
-		struct request *rq = img_req->rq;
+		struct request *rq = blk_mq_rq_from_pdu(img_req);
 
-		rbd_img_request_put(img_req);
+		rbd_img_request_destroy(img_req);
 		blk_mq_end_request(rq, errno_to_blk_status(result));
 	}
 }
@@ -3781,11 +3754,7 @@ static int __rbd_notify_op_lock(struct rbd_device *rbd_dev,
 static void rbd_notify_op_lock(struct rbd_device *rbd_dev,
 			       enum rbd_notify_op notify_op)
 {
-	struct page **reply_pages;
-	size_t reply_len;
-
-	__rbd_notify_op_lock(rbd_dev, notify_op, &reply_pages, &reply_len);
-	ceph_release_page_vector(reply_pages, calc_pages_for(0, reply_len));
+	__rbd_notify_op_lock(rbd_dev, notify_op, NULL, NULL);
 }
 
 static void rbd_notify_acquired_lock(struct work_struct *work)
@@ -4554,6 +4523,10 @@ static void cancel_tasks_sync(struct rbd_device *rbd_dev)
 	cancel_work_sync(&rbd_dev->unlock_work);
 }
 
+/*
+ * header_rwsem must not be held to avoid a deadlock with
+ * rbd_dev_refresh() when flushing notifies.
+ */
 static void rbd_unregister_watch(struct rbd_device *rbd_dev)
 {
 	cancel_tasks_sync(rbd_dev);
@@ -4707,85 +4680,37 @@ static int rbd_obj_method_sync(struct rbd_device *rbd_dev,
 
 static void rbd_queue_workfn(struct work_struct *work)
 {
-	struct request *rq = blk_mq_rq_from_pdu(work);
-	struct rbd_device *rbd_dev = rq->q->queuedata;
-	struct rbd_img_request *img_request;
-	struct ceph_snap_context *snapc = NULL;
+	struct rbd_img_request *img_request =
+	    container_of(work, struct rbd_img_request, work);
+	struct rbd_device *rbd_dev = img_request->rbd_dev;
+	enum obj_operation_type op_type = img_request->op_type;
+	struct request *rq = blk_mq_rq_from_pdu(img_request);
 	u64 offset = (u64)blk_rq_pos(rq) << SECTOR_SHIFT;
 	u64 length = blk_rq_bytes(rq);
-	enum obj_operation_type op_type;
 	u64 mapping_size;
 	int result;
 
-	switch (req_op(rq)) {
-	case REQ_OP_DISCARD:
-		op_type = OBJ_OP_DISCARD;
-		break;
-	case REQ_OP_WRITE_ZEROES:
-		op_type = OBJ_OP_ZEROOUT;
-		break;
-	case REQ_OP_WRITE:
-		op_type = OBJ_OP_WRITE;
-		break;
-	case REQ_OP_READ:
-		op_type = OBJ_OP_READ;
-		break;
-	default:
-		dout("%s: non-fs request type %d\n", __func__, req_op(rq));
-		result = -EIO;
-		goto err;
-	}
-
 	/* Ignore/skip any zero-length requests */
-
 	if (!length) {
 		dout("%s: zero-length request\n", __func__);
 		result = 0;
-		goto err_rq;
-	}
-
-	if (op_type != OBJ_OP_READ) {
-		if (rbd_is_ro(rbd_dev)) {
-			rbd_warn(rbd_dev, "%s on read-only mapping",
-				 obj_op_name(op_type));
-			result = -EIO;
-			goto err;
-		}
-		rbd_assert(!rbd_is_snap(rbd_dev));
-	}
-
-	if (offset && length > U64_MAX - offset + 1) {
-		rbd_warn(rbd_dev, "bad request range (%llu~%llu)", offset,
-			 length);
-		result = -EINVAL;
-		goto err_rq;	/* Shouldn't happen */
+		goto err_img_request;
 	}
 
 	blk_mq_start_request(rq);
 
 	down_read(&rbd_dev->header_rwsem);
 	mapping_size = rbd_dev->mapping.size;
-	if (op_type != OBJ_OP_READ) {
-		snapc = rbd_dev->header.snapc;
-		ceph_get_snap_context(snapc);
-	}
+	rbd_img_capture_header(img_request);
 	up_read(&rbd_dev->header_rwsem);
 
 	if (offset + length > mapping_size) {
 		rbd_warn(rbd_dev, "beyond EOD (%llu~%llu > %llu)", offset,
 			 length, mapping_size);
 		result = -EIO;
-		goto err_rq;
+		goto err_img_request;
 	}
 
-	img_request = rbd_img_request_create(rbd_dev, op_type, snapc);
-	if (!img_request) {
-		result = -ENOMEM;
-		goto err_rq;
-	}
-	img_request->rq = rq;
-	snapc = NULL; /* img_request consumes a ref */
-
 	dout("%s rbd_dev %p img_req %p %s %llu~%llu\n", __func__, rbd_dev,
 	     img_request, obj_op_name(op_type), offset, length);
 
@@ -4801,23 +4726,51 @@ static void rbd_queue_workfn(struct work_struct *work)
 	return;
 
 err_img_request:
-	rbd_img_request_put(img_request);
-err_rq:
+	rbd_img_request_destroy(img_request);
 	if (result)
 		rbd_warn(rbd_dev, "%s %llx at %llx result %d",
 			 obj_op_name(op_type), length, offset, result);
-	ceph_put_snap_context(snapc);
-err:
 	blk_mq_end_request(rq, errno_to_blk_status(result));
 }
 
 static blk_status_t rbd_queue_rq(struct blk_mq_hw_ctx *hctx,
 		const struct blk_mq_queue_data *bd)
 {
-	struct request *rq = bd->rq;
-	struct work_struct *work = blk_mq_rq_to_pdu(rq);
+	struct rbd_device *rbd_dev = hctx->queue->queuedata;
+	struct rbd_img_request *img_req = blk_mq_rq_to_pdu(bd->rq);
+	enum obj_operation_type op_type;
 
-	queue_work(rbd_wq, work);
+	switch (req_op(bd->rq)) {
+	case REQ_OP_DISCARD:
+		op_type = OBJ_OP_DISCARD;
+		break;
+	case REQ_OP_WRITE_ZEROES:
+		op_type = OBJ_OP_ZEROOUT;
+		break;
+	case REQ_OP_WRITE:
+		op_type = OBJ_OP_WRITE;
+		break;
+	case REQ_OP_READ:
+		op_type = OBJ_OP_READ;
+		break;
+	default:
+		rbd_warn(rbd_dev, "unknown req_op %d", req_op(bd->rq));
+		return BLK_STS_IOERR;
+	}
+
+	rbd_img_request_init(img_req, rbd_dev, op_type);
+
+	if (rbd_img_is_write(img_req)) {
+		if (rbd_is_ro(rbd_dev)) {
+			rbd_warn(rbd_dev, "%s on read-only mapping",
+				 obj_op_name(img_req->op_type));
+			return BLK_STS_IOERR;
+		}
+		rbd_assert(!rbd_is_snap(rbd_dev));
+	}
+
+	INIT_WORK(&img_req->work, rbd_queue_workfn);
+	queue_work(rbd_wq, &img_req->work);
 	return BLK_STS_OK;
 }
 
@@ -4984,18 +4937,8 @@ static int rbd_dev_refresh(struct rbd_device *rbd_dev)
 	return ret;
 }
 
-static int rbd_init_request(struct blk_mq_tag_set *set, struct request *rq,
-		unsigned int hctx_idx, unsigned int numa_node)
-{
-	struct work_struct *work = blk_mq_rq_to_pdu(rq);
-
-	INIT_WORK(work, rbd_queue_workfn);
-	return 0;
-}
-
 static const struct blk_mq_ops rbd_mq_ops = {
 	.queue_rq	= rbd_queue_rq,
-	.init_request	= rbd_init_request,
 };
 
 static int rbd_init_disk(struct rbd_device *rbd_dev)
@@ -5027,8 +4970,8 @@ static int rbd_init_disk(struct rbd_device *rbd_dev)
 	rbd_dev->tag_set.queue_depth = rbd_dev->opts->queue_depth;
 	rbd_dev->tag_set.numa_node = NUMA_NO_NODE;
 	rbd_dev->tag_set.flags = BLK_MQ_F_SHOULD_MERGE;
-	rbd_dev->tag_set.nr_hw_queues = 1;
-	rbd_dev->tag_set.cmd_size = sizeof(struct work_struct);
+	rbd_dev->tag_set.nr_hw_queues = num_present_cpus();
+	rbd_dev->tag_set.cmd_size = sizeof(struct rbd_img_request);
 
 	err = blk_mq_alloc_tag_set(&rbd_dev->tag_set);
 	if (err)
@@ -6951,9 +6894,10 @@ static void rbd_print_dne(struct rbd_device *rbd_dev, bool is_snap)
 
 static void rbd_dev_image_release(struct rbd_device *rbd_dev)
 {
-	rbd_dev_unprobe(rbd_dev);
-	if (rbd_dev->opts)
+	if (!rbd_is_ro(rbd_dev))
 		rbd_unregister_watch(rbd_dev);
+
+	rbd_dev_unprobe(rbd_dev);
 	rbd_dev->image_format = 0;
 	kfree(rbd_dev->spec->image_id);
 	rbd_dev->spec->image_id = NULL;
@@ -6964,6 +6908,9 @@ static void rbd_dev_image_release(struct rbd_device *rbd_dev)
  * device.  If this image is the one being mapped (i.e., not a
  * parent), initiate a watch on its header object before using that
  * object to get detailed information about the rbd image.
+ *
+ * On success, returns with header_rwsem held for write if called
+ * with @depth == 0.
  */
 static int rbd_dev_image_probe(struct rbd_device *rbd_dev, int depth)
 {
@@ -6993,11 +6940,14 @@ static int rbd_dev_image_probe(struct rbd_device *rbd_dev, int depth)
 		}
 	}
 
+	if (!depth)
+		down_write(&rbd_dev->header_rwsem);
+
 	ret = rbd_dev_header_info(rbd_dev);
 	if (ret) {
 		if (ret == -ENOENT && !need_watch)
 			rbd_print_dne(rbd_dev, false);
-		goto err_out_watch;
+		goto err_out_probe;
 	}
 
 	/*
@@ -7042,10 +6992,11 @@ static int rbd_dev_image_probe(struct rbd_device *rbd_dev, int depth)
 	return 0;
 
 err_out_probe:
-	rbd_dev_unprobe(rbd_dev);
-err_out_watch:
+	if (!depth)
+		up_write(&rbd_dev->header_rwsem);
 	if (need_watch)
 		rbd_unregister_watch(rbd_dev);
+	rbd_dev_unprobe(rbd_dev);
 err_out_format:
 	rbd_dev->image_format = 0;
 	kfree(rbd_dev->spec->image_id);
@@ -7107,12 +7058,9 @@ static ssize_t do_rbd_add(struct bus_type *bus,
 		goto err_out_rbd_dev;
 	}
 
-	down_write(&rbd_dev->header_rwsem);
 	rc = rbd_dev_image_probe(rbd_dev, 0);
-	if (rc < 0) {
-		up_write(&rbd_dev->header_rwsem);
+	if (rc < 0)
 		goto err_out_rbd_dev;
-	}
 
 	if (rbd_dev->opts->alloc_size > rbd_dev->layout.object_size) {
 		rbd_warn(rbd_dev, "alloc_size adjusted to %u",
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 915cf5b..3b889ea 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -47,6 +47,7 @@
 #include <linux/bitmap.h>
 #include <linux/list.h>
 #include <linux/workqueue.h>
+#include <linux/sched/mm.h>
 
 #include <xen/xen.h>
 #include <xen/xenbus.h>
@@ -2189,10 +2190,12 @@ static void blkfront_setup_discard(struct blkfront_info *info)
 
 static int blkfront_setup_indirect(struct blkfront_ring_info *rinfo)
 {
-	unsigned int psegs, grants;
+	unsigned int psegs, grants, memflags;
 	int err, i;
 	struct blkfront_info *info = rinfo->dev_info;
 
+	memflags = memalloc_noio_save();
+
 	if (info->max_indirect_segments == 0) {
 		if (!HAS_EXTRA_REQ)
 			grants = BLKIF_MAX_SEGMENTS_PER_REQUEST;
@@ -2224,7 +2227,7 @@ static int blkfront_setup_indirect(struct blkfront_ring_info *rinfo)
 
 		BUG_ON(!list_empty(&rinfo->indirect_pages));
 		for (i = 0; i < num; i++) {
-			struct page *indirect_page = alloc_page(GFP_NOIO);
+			struct page *indirect_page = alloc_page(GFP_KERNEL);
 			if (!indirect_page)
 				goto out_of_memory;
 			list_add(&indirect_page->lru, &rinfo->indirect_pages);
@@ -2235,15 +2238,15 @@ static int blkfront_setup_indirect(struct blkfront_ring_info *rinfo)
 		rinfo->shadow[i].grants_used =
 			kvcalloc(grants,
 				 sizeof(rinfo->shadow[i].grants_used[0]),
-				 GFP_NOIO);
+				 GFP_KERNEL);
 		rinfo->shadow[i].sg = kvcalloc(psegs,
 					       sizeof(rinfo->shadow[i].sg[0]),
-					       GFP_NOIO);
+					       GFP_KERNEL);
 		if (info->max_indirect_segments)
 			rinfo->shadow[i].indirect_grants =
 				kvcalloc(INDIRECT_GREFS(grants),
 					 sizeof(rinfo->shadow[i].indirect_grants[0]),
-					 GFP_NOIO);
+					 GFP_KERNEL);
 		if ((rinfo->shadow[i].grants_used == NULL) ||
 			(rinfo->shadow[i].sg == NULL) ||
 		     (info->max_indirect_segments &&
@@ -2252,6 +2255,7 @@ static int blkfront_setup_indirect(struct blkfront_ring_info *rinfo)
 		sg_init_table(rinfo->shadow[i].sg, psegs);
 	}
 
+	memalloc_noio_restore(memflags);
 
 	return 0;
 
@@ -2271,6 +2275,9 @@ static int blkfront_setup_indirect(struct blkfront_ring_info *rinfo)
 			__free_page(indirect_page);
 		}
 	}
+
+	memalloc_noio_restore(memflags);
+
 	return -ENOMEM;
 }
 
diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index 6095b6d..6d4e449 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -201,5 +201,6 @@
 	  peripherals.
 
 source "drivers/bus/fsl-mc/Kconfig"
+source "drivers/bus/mhi/Kconfig"
 
 endmenu
diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile
index 1320bcf..05f32cd 100644
--- a/drivers/bus/Makefile
+++ b/drivers/bus/Makefile
@@ -34,3 +34,6 @@
 obj-$(CONFIG_VEXPRESS_CONFIG)	+= vexpress-config.o
 
 obj-$(CONFIG_DA8XX_MSTPRI)	+= da8xx-mstpri.o
+
+# MHI
+obj-$(CONFIG_MHI_BUS)		+= mhi/
diff --git a/drivers/bus/hisi_lpc.c b/drivers/bus/hisi_lpc.c
index 8101df9..378f5d6 100644
--- a/drivers/bus/hisi_lpc.c
+++ b/drivers/bus/hisi_lpc.c
@@ -358,6 +358,26 @@ static int hisi_lpc_acpi_xlat_io_res(struct acpi_device *adev,
 }
 
 /*
+ * Released firmware describes the IO port max address as 0x3fff, which is
+ * the max host bus address. Fixup to a proper range. This will probably
+ * never be fixed in firmware.
+ */
+static void hisi_lpc_acpi_fixup_child_resource(struct device *hostdev,
+					       struct resource *r)
+{
+	if (r->end != 0x3fff)
+		return;
+
+	if (r->start == 0xe4)
+		r->end = 0xe4 + 0x04 - 1;
+	else if (r->start == 0x2f8)
+		r->end = 0x2f8 + 0x08 - 1;
+	else
+		dev_warn(hostdev, "unrecognised resource %pR to fixup, ignoring\n",
+			 r);
+}
+
+/*
  * hisi_lpc_acpi_set_io_res - set the resources for a child
  * @child: the device node to be updated the I/O resource
  * @hostdev: the device node associated with host controller
@@ -418,8 +438,11 @@ static int hisi_lpc_acpi_set_io_res(struct device *child,
 		return -ENOMEM;
 	}
 	count = 0;
-	list_for_each_entry(rentry, &resource_list, node)
-		resources[count++] = *rentry->res;
+	list_for_each_entry(rentry, &resource_list, node) {
+		resources[count] = *rentry->res;
+		hisi_lpc_acpi_fixup_child_resource(hostdev, &resources[count]);
+		count++;
+	}
 
 	acpi_dev_free_resource_list(&resource_list);
 
diff --git a/drivers/bus/mhi/Kconfig b/drivers/bus/mhi/Kconfig
new file mode 100644
index 0000000..a8bd9bd
--- /dev/null
+++ b/drivers/bus/mhi/Kconfig
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# MHI bus
+#
+# Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
+#
+
+config MHI_BUS
+       tristate "Modem Host Interface (MHI) bus"
+       help
+	 Bus driver for MHI protocol. Modem Host Interface (MHI) is a
+	 communication protocol used by the host processors to control
+	 and communicate with modem devices over a high speed peripheral
+	 bus or shared memory.
diff --git a/drivers/bus/mhi/Makefile b/drivers/bus/mhi/Makefile
new file mode 100644
index 0000000..19e6443
--- /dev/null
+++ b/drivers/bus/mhi/Makefile
@@ -0,0 +1,2 @@
+# core layer
+obj-y += core/
diff --git a/drivers/bus/mhi/core/Makefile b/drivers/bus/mhi/core/Makefile
new file mode 100644
index 0000000..66e2700
--- /dev/null
+++ b/drivers/bus/mhi/core/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_MHI_BUS) := mhi.o
+
+mhi-y := init.o main.o pm.o boot.o
diff --git a/drivers/bus/mhi/core/boot.c b/drivers/bus/mhi/core/boot.c
new file mode 100644
index 0000000..ebad5eb
--- /dev/null
+++ b/drivers/bus/mhi/core/boot.c
@@ -0,0 +1,507 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dma-direction.h>
+#include <linux/dma-mapping.h>
+#include <linux/firmware.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/mhi.h>
+#include <linux/module.h>
+#include <linux/random.h>
+#include <linux/slab.h>
+#include <linux/wait.h>
+#include "internal.h"
+
+/* Setup RDDM vector table for RDDM transfer and program RXVEC */
+void mhi_rddm_prepare(struct mhi_controller *mhi_cntrl,
+		      struct image_info *img_info)
+{
+	struct mhi_buf *mhi_buf = img_info->mhi_buf;
+	struct bhi_vec_entry *bhi_vec = img_info->bhi_vec;
+	void __iomem *base = mhi_cntrl->bhie;
+	struct device *dev = &mhi_cntrl->mhi_dev->dev;
+	u32 sequence_id;
+	unsigned int i;
+
+	for (i = 0; i < img_info->entries - 1; i++, mhi_buf++, bhi_vec++) {
+		bhi_vec->dma_addr = mhi_buf->dma_addr;
+		bhi_vec->size = mhi_buf->len;
+	}
+
+	dev_dbg(dev, "BHIe programming for RDDM\n");
+
+	mhi_write_reg(mhi_cntrl, base, BHIE_RXVECADDR_HIGH_OFFS,
+		      upper_32_bits(mhi_buf->dma_addr));
+
+	mhi_write_reg(mhi_cntrl, base, BHIE_RXVECADDR_LOW_OFFS,
+		      lower_32_bits(mhi_buf->dma_addr));
+
+	mhi_write_reg(mhi_cntrl, base, BHIE_RXVECSIZE_OFFS, mhi_buf->len);
+	sequence_id = prandom_u32() & BHIE_RXVECSTATUS_SEQNUM_BMSK;
+
+	if (unlikely(!sequence_id))
+		sequence_id = 1;
+
+	mhi_write_reg_field(mhi_cntrl, base, BHIE_RXVECDB_OFFS,
+			    BHIE_RXVECDB_SEQNUM_BMSK, BHIE_RXVECDB_SEQNUM_SHFT,
+			    sequence_id);
+
+	dev_dbg(dev, "Address: %p and len: 0x%zx sequence: %u\n",
+		&mhi_buf->dma_addr, mhi_buf->len, sequence_id);
+}
+
+/* Collect RDDM buffer during kernel panic */
+static int __mhi_download_rddm_in_panic(struct mhi_controller *mhi_cntrl)
+{
+	int ret;
+	u32 rx_status;
+	enum mhi_ee_type ee;
+	const u32 delayus = 2000;
+	u32 retry = (mhi_cntrl->timeout_ms * 1000) / delayus;
+	const u32 rddm_timeout_us = 200000;
+	int rddm_retry = rddm_timeout_us / delayus;
+	void __iomem *base = mhi_cntrl->bhie;
+	struct device *dev = &mhi_cntrl->mhi_dev->dev;
+
+	dev_dbg(dev, "Entered with pm_state:%s dev_state:%s ee:%s\n",
+		to_mhi_pm_state_str(mhi_cntrl->pm_state),
+		TO_MHI_STATE_STR(mhi_cntrl->dev_state),
+		TO_MHI_EXEC_STR(mhi_cntrl->ee));
+
+	/*
+	 * This should only be executing during a kernel panic, we expect all
+	 * other cores to shutdown while we're collecting RDDM buffer. After
+	 * returning from this function, we expect the device to reset.
+	 *
+	 * Normaly, we read/write pm_state only after grabbing the
+	 * pm_lock, since we're in a panic, skipping it. Also there is no
+	 * gurantee that this state change would take effect since
+	 * we're setting it w/o grabbing pm_lock
+	 */
+	mhi_cntrl->pm_state = MHI_PM_LD_ERR_FATAL_DETECT;
+	/* update should take the effect immediately */
+	smp_wmb();
+
+	/*
+	 * Make sure device is not already in RDDM. In case the device asserts
+	 * and a kernel panic follows, device will already be in RDDM.
+	 * Do not trigger SYS ERR again and proceed with waiting for
+	 * image download completion.
+	 */
+	ee = mhi_get_exec_env(mhi_cntrl);
+	if (ee != MHI_EE_RDDM) {
+		dev_dbg(dev, "Trigger device into RDDM mode using SYS ERR\n");
+		mhi_set_mhi_state(mhi_cntrl, MHI_STATE_SYS_ERR);
+
+		dev_dbg(dev, "Waiting for device to enter RDDM\n");
+		while (rddm_retry--) {
+			ee = mhi_get_exec_env(mhi_cntrl);
+			if (ee == MHI_EE_RDDM)
+				break;
+
+			udelay(delayus);
+		}
+
+		if (rddm_retry <= 0) {
+			/* Hardware reset so force device to enter RDDM */
+			dev_dbg(dev,
+				"Did not enter RDDM, do a host req reset\n");
+			mhi_write_reg(mhi_cntrl, mhi_cntrl->regs,
+				      MHI_SOC_RESET_REQ_OFFSET,
+				      MHI_SOC_RESET_REQ);
+			udelay(delayus);
+		}
+
+		ee = mhi_get_exec_env(mhi_cntrl);
+	}
+
+	dev_dbg(dev, "Waiting for image download completion, current EE: %s\n",
+		TO_MHI_EXEC_STR(ee));
+
+	while (retry--) {
+		ret = mhi_read_reg_field(mhi_cntrl, base, BHIE_RXVECSTATUS_OFFS,
+					 BHIE_RXVECSTATUS_STATUS_BMSK,
+					 BHIE_RXVECSTATUS_STATUS_SHFT,
+					 &rx_status);
+		if (ret)
+			return -EIO;
+
+		if (rx_status == BHIE_RXVECSTATUS_STATUS_XFER_COMPL)
+			return 0;
+
+		udelay(delayus);
+	}
+
+	ee = mhi_get_exec_env(mhi_cntrl);
+	ret = mhi_read_reg(mhi_cntrl, base, BHIE_RXVECSTATUS_OFFS, &rx_status);
+
+	dev_err(dev, "Did not complete RDDM transfer\n");
+	dev_err(dev, "Current EE: %s\n", TO_MHI_EXEC_STR(ee));
+	dev_err(dev, "RXVEC_STATUS: 0x%x\n", rx_status);
+
+	return -EIO;
+}
+
+/* Download RDDM image from device */
+int mhi_download_rddm_img(struct mhi_controller *mhi_cntrl, bool in_panic)
+{
+	void __iomem *base = mhi_cntrl->bhie;
+	u32 rx_status;
+
+	if (in_panic)
+		return __mhi_download_rddm_in_panic(mhi_cntrl);
+
+	/* Wait for the image download to complete */
+	wait_event_timeout(mhi_cntrl->state_event,
+			   mhi_read_reg_field(mhi_cntrl, base,
+					      BHIE_RXVECSTATUS_OFFS,
+					      BHIE_RXVECSTATUS_STATUS_BMSK,
+					      BHIE_RXVECSTATUS_STATUS_SHFT,
+					      &rx_status) || rx_status,
+			   msecs_to_jiffies(mhi_cntrl->timeout_ms));
+
+	return (rx_status == BHIE_RXVECSTATUS_STATUS_XFER_COMPL) ? 0 : -EIO;
+}
+EXPORT_SYMBOL_GPL(mhi_download_rddm_img);
+
+static int mhi_fw_load_amss(struct mhi_controller *mhi_cntrl,
+			    const struct mhi_buf *mhi_buf)
+{
+	void __iomem *base = mhi_cntrl->bhie;
+	rwlock_t *pm_lock = &mhi_cntrl->pm_lock;
+	u32 tx_status, sequence_id;
+
+	read_lock_bh(pm_lock);
+	if (!MHI_REG_ACCESS_VALID(mhi_cntrl->pm_state)) {
+		read_unlock_bh(pm_lock);
+		return -EIO;
+	}
+
+	mhi_write_reg(mhi_cntrl, base, BHIE_TXVECADDR_HIGH_OFFS,
+		      upper_32_bits(mhi_buf->dma_addr));
+
+	mhi_write_reg(mhi_cntrl, base, BHIE_TXVECADDR_LOW_OFFS,
+		      lower_32_bits(mhi_buf->dma_addr));
+
+	mhi_write_reg(mhi_cntrl, base, BHIE_TXVECSIZE_OFFS, mhi_buf->len);
+
+	sequence_id = prandom_u32() & BHIE_TXVECSTATUS_SEQNUM_BMSK;
+	mhi_write_reg_field(mhi_cntrl, base, BHIE_TXVECDB_OFFS,
+			    BHIE_TXVECDB_SEQNUM_BMSK, BHIE_TXVECDB_SEQNUM_SHFT,
+			    sequence_id);
+	read_unlock_bh(pm_lock);
+
+	/* Wait for the image download to complete */
+	wait_event_timeout(mhi_cntrl->state_event,
+			   MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state) ||
+			   mhi_read_reg_field(mhi_cntrl, base,
+					      BHIE_TXVECSTATUS_OFFS,
+					      BHIE_TXVECSTATUS_STATUS_BMSK,
+					      BHIE_TXVECSTATUS_STATUS_SHFT,
+					      &tx_status) || tx_status,
+			   msecs_to_jiffies(mhi_cntrl->timeout_ms));
+
+	if (MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state))
+		return -EIO;
+
+	return (tx_status == BHIE_TXVECSTATUS_STATUS_XFER_COMPL) ? 0 : -EIO;
+}
+
+static int mhi_fw_load_sbl(struct mhi_controller *mhi_cntrl,
+			   dma_addr_t dma_addr,
+			   size_t size)
+{
+	u32 tx_status, val, session_id;
+	int i, ret;
+	void __iomem *base = mhi_cntrl->bhi;
+	rwlock_t *pm_lock = &mhi_cntrl->pm_lock;
+	struct device *dev = &mhi_cntrl->mhi_dev->dev;
+	struct {
+		char *name;
+		u32 offset;
+	} error_reg[] = {
+		{ "ERROR_CODE", BHI_ERRCODE },
+		{ "ERROR_DBG1", BHI_ERRDBG1 },
+		{ "ERROR_DBG2", BHI_ERRDBG2 },
+		{ "ERROR_DBG3", BHI_ERRDBG3 },
+		{ NULL },
+	};
+
+	read_lock_bh(pm_lock);
+	if (!MHI_REG_ACCESS_VALID(mhi_cntrl->pm_state)) {
+		read_unlock_bh(pm_lock);
+		goto invalid_pm_state;
+	}
+
+	dev_dbg(dev, "Starting SBL download via BHI\n");
+	mhi_write_reg(mhi_cntrl, base, BHI_STATUS, 0);
+	mhi_write_reg(mhi_cntrl, base, BHI_IMGADDR_HIGH,
+		      upper_32_bits(dma_addr));
+	mhi_write_reg(mhi_cntrl, base, BHI_IMGADDR_LOW,
+		      lower_32_bits(dma_addr));
+	mhi_write_reg(mhi_cntrl, base, BHI_IMGSIZE, size);
+	session_id = prandom_u32() & BHI_TXDB_SEQNUM_BMSK;
+	mhi_write_reg(mhi_cntrl, base, BHI_IMGTXDB, session_id);
+	read_unlock_bh(pm_lock);
+
+	/* Wait for the image download to complete */
+	ret = wait_event_timeout(mhi_cntrl->state_event,
+			   MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state) ||
+			   mhi_read_reg_field(mhi_cntrl, base, BHI_STATUS,
+					      BHI_STATUS_MASK, BHI_STATUS_SHIFT,
+					      &tx_status) || tx_status,
+			   msecs_to_jiffies(mhi_cntrl->timeout_ms));
+	if (MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state))
+		goto invalid_pm_state;
+
+	if (tx_status == BHI_STATUS_ERROR) {
+		dev_err(dev, "Image transfer failed\n");
+		read_lock_bh(pm_lock);
+		if (MHI_REG_ACCESS_VALID(mhi_cntrl->pm_state)) {
+			for (i = 0; error_reg[i].name; i++) {
+				ret = mhi_read_reg(mhi_cntrl, base,
+						   error_reg[i].offset, &val);
+				if (ret)
+					break;
+				dev_err(dev, "Reg: %s value: 0x%x\n",
+					error_reg[i].name, val);
+			}
+		}
+		read_unlock_bh(pm_lock);
+		goto invalid_pm_state;
+	}
+
+	return (!ret) ? -ETIMEDOUT : 0;
+
+invalid_pm_state:
+
+	return -EIO;
+}
+
+void mhi_free_bhie_table(struct mhi_controller *mhi_cntrl,
+			 struct image_info *image_info)
+{
+	int i;
+	struct mhi_buf *mhi_buf = image_info->mhi_buf;
+
+	for (i = 0; i < image_info->entries; i++, mhi_buf++)
+		mhi_free_coherent(mhi_cntrl, mhi_buf->len, mhi_buf->buf,
+				  mhi_buf->dma_addr);
+
+	kfree(image_info->mhi_buf);
+	kfree(image_info);
+}
+
+int mhi_alloc_bhie_table(struct mhi_controller *mhi_cntrl,
+			 struct image_info **image_info,
+			 size_t alloc_size)
+{
+	size_t seg_size = mhi_cntrl->seg_len;
+	int segments = DIV_ROUND_UP(alloc_size, seg_size) + 1;
+	int i;
+	struct image_info *img_info;
+	struct mhi_buf *mhi_buf;
+
+	img_info = kzalloc(sizeof(*img_info), GFP_KERNEL);
+	if (!img_info)
+		return -ENOMEM;
+
+	/* Allocate memory for entries */
+	img_info->mhi_buf = kcalloc(segments, sizeof(*img_info->mhi_buf),
+				    GFP_KERNEL);
+	if (!img_info->mhi_buf)
+		goto error_alloc_mhi_buf;
+
+	/* Allocate and populate vector table */
+	mhi_buf = img_info->mhi_buf;
+	for (i = 0; i < segments; i++, mhi_buf++) {
+		size_t vec_size = seg_size;
+
+		/* Vector table is the last entry */
+		if (i == segments - 1)
+			vec_size = sizeof(struct bhi_vec_entry) * i;
+
+		mhi_buf->len = vec_size;
+		mhi_buf->buf = mhi_alloc_coherent(mhi_cntrl, vec_size,
+						  &mhi_buf->dma_addr,
+						  GFP_KERNEL);
+		if (!mhi_buf->buf)
+			goto error_alloc_segment;
+	}
+
+	img_info->bhi_vec = img_info->mhi_buf[segments - 1].buf;
+	img_info->entries = segments;
+	*image_info = img_info;
+
+	return 0;
+
+error_alloc_segment:
+	for (--i, --mhi_buf; i >= 0; i--, mhi_buf--)
+		mhi_free_coherent(mhi_cntrl, mhi_buf->len, mhi_buf->buf,
+				  mhi_buf->dma_addr);
+
+error_alloc_mhi_buf:
+	kfree(img_info);
+
+	return -ENOMEM;
+}
+
+static void mhi_firmware_copy(struct mhi_controller *mhi_cntrl,
+			      const struct firmware *firmware,
+			      struct image_info *img_info)
+{
+	size_t remainder = firmware->size;
+	size_t to_cpy;
+	const u8 *buf = firmware->data;
+	int i = 0;
+	struct mhi_buf *mhi_buf = img_info->mhi_buf;
+	struct bhi_vec_entry *bhi_vec = img_info->bhi_vec;
+
+	while (remainder) {
+		to_cpy = min(remainder, mhi_buf->len);
+		memcpy(mhi_buf->buf, buf, to_cpy);
+		bhi_vec->dma_addr = mhi_buf->dma_addr;
+		bhi_vec->size = to_cpy;
+
+		buf += to_cpy;
+		remainder -= to_cpy;
+		i++;
+		bhi_vec++;
+		mhi_buf++;
+	}
+}
+
+void mhi_fw_load_worker(struct work_struct *work)
+{
+	struct mhi_controller *mhi_cntrl;
+	const struct firmware *firmware = NULL;
+	struct image_info *image_info;
+	struct device *dev;
+	const char *fw_name;
+	void *buf;
+	dma_addr_t dma_addr;
+	size_t size;
+	int ret;
+
+	mhi_cntrl = container_of(work, struct mhi_controller, fw_worker);
+	dev = &mhi_cntrl->mhi_dev->dev;
+
+	dev_dbg(dev, "Waiting for device to enter PBL from: %s\n",
+		TO_MHI_EXEC_STR(mhi_cntrl->ee));
+
+	ret = wait_event_timeout(mhi_cntrl->state_event,
+				 MHI_IN_PBL(mhi_cntrl->ee) ||
+				 MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state),
+				 msecs_to_jiffies(mhi_cntrl->timeout_ms));
+
+	if (!ret || MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state)) {
+		dev_err(dev, "Device MHI is not in valid state\n");
+		return;
+	}
+
+	/* If device is in pass through, do reset to ready state transition */
+	if (mhi_cntrl->ee == MHI_EE_PTHRU)
+		goto fw_load_ee_pthru;
+
+	fw_name = (mhi_cntrl->ee == MHI_EE_EDL) ?
+		mhi_cntrl->edl_image : mhi_cntrl->fw_image;
+
+	if (!fw_name || (mhi_cntrl->fbc_download && (!mhi_cntrl->sbl_size ||
+						     !mhi_cntrl->seg_len))) {
+		dev_err(dev,
+			"No firmware image defined or !sbl_size || !seg_len\n");
+		return;
+	}
+
+	ret = request_firmware(&firmware, fw_name, dev);
+	if (ret) {
+		dev_err(dev, "Error loading firmware: %d\n", ret);
+		return;
+	}
+
+	size = (mhi_cntrl->fbc_download) ? mhi_cntrl->sbl_size : firmware->size;
+
+	/* SBL size provided is maximum size, not necessarily the image size */
+	if (size > firmware->size)
+		size = firmware->size;
+
+	buf = mhi_alloc_coherent(mhi_cntrl, size, &dma_addr, GFP_KERNEL);
+	if (!buf) {
+		release_firmware(firmware);
+		return;
+	}
+
+	/* Download SBL image */
+	memcpy(buf, firmware->data, size);
+	ret = mhi_fw_load_sbl(mhi_cntrl, dma_addr, size);
+	mhi_free_coherent(mhi_cntrl, size, buf, dma_addr);
+
+	if (!mhi_cntrl->fbc_download || ret || mhi_cntrl->ee == MHI_EE_EDL)
+		release_firmware(firmware);
+
+	/* Error or in EDL mode, we're done */
+	if (ret || mhi_cntrl->ee == MHI_EE_EDL)
+		return;
+
+	write_lock_irq(&mhi_cntrl->pm_lock);
+	mhi_cntrl->dev_state = MHI_STATE_RESET;
+	write_unlock_irq(&mhi_cntrl->pm_lock);
+
+	/*
+	 * If we're doing fbc, populate vector tables while
+	 * device transitioning into MHI READY state
+	 */
+	if (mhi_cntrl->fbc_download) {
+		ret = mhi_alloc_bhie_table(mhi_cntrl, &mhi_cntrl->fbc_image,
+					   firmware->size);
+		if (ret)
+			goto error_alloc_fw_table;
+
+		/* Load the firmware into BHIE vec table */
+		mhi_firmware_copy(mhi_cntrl, firmware, mhi_cntrl->fbc_image);
+	}
+
+fw_load_ee_pthru:
+	/* Transitioning into MHI RESET->READY state */
+	ret = mhi_ready_state_transition(mhi_cntrl);
+
+	if (!mhi_cntrl->fbc_download)
+		return;
+
+	if (ret)
+		goto error_read;
+
+	/* Wait for the SBL event */
+	ret = wait_event_timeout(mhi_cntrl->state_event,
+				 mhi_cntrl->ee == MHI_EE_SBL ||
+				 MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state),
+				 msecs_to_jiffies(mhi_cntrl->timeout_ms));
+
+	if (!ret || MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state)) {
+		dev_err(dev, "MHI did not enter SBL\n");
+		goto error_read;
+	}
+
+	/* Start full firmware image download */
+	image_info = mhi_cntrl->fbc_image;
+	ret = mhi_fw_load_amss(mhi_cntrl,
+			       /* Vector table is the last entry */
+			       &image_info->mhi_buf[image_info->entries - 1]);
+
+	release_firmware(firmware);
+
+	return;
+
+error_read:
+	mhi_free_bhie_table(mhi_cntrl, mhi_cntrl->fbc_image);
+	mhi_cntrl->fbc_image = NULL;
+
+error_alloc_fw_table:
+	release_firmware(firmware);
+}
diff --git a/drivers/bus/mhi/core/init.c b/drivers/bus/mhi/core/init.c
new file mode 100644
index 0000000..b38359c
--- /dev/null
+++ b/drivers/bus/mhi/core/init.c
@@ -0,0 +1,1293 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/dma-direction.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/mhi.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/wait.h>
+#include "internal.h"
+
+const char * const mhi_ee_str[MHI_EE_MAX] = {
+	[MHI_EE_PBL] = "PBL",
+	[MHI_EE_SBL] = "SBL",
+	[MHI_EE_AMSS] = "AMSS",
+	[MHI_EE_RDDM] = "RDDM",
+	[MHI_EE_WFW] = "WFW",
+	[MHI_EE_PTHRU] = "PASS THRU",
+	[MHI_EE_EDL] = "EDL",
+	[MHI_EE_DISABLE_TRANSITION] = "DISABLE",
+	[MHI_EE_NOT_SUPPORTED] = "NOT SUPPORTED",
+};
+
+const char * const dev_state_tran_str[DEV_ST_TRANSITION_MAX] = {
+	[DEV_ST_TRANSITION_PBL] = "PBL",
+	[DEV_ST_TRANSITION_READY] = "READY",
+	[DEV_ST_TRANSITION_SBL] = "SBL",
+	[DEV_ST_TRANSITION_MISSION_MODE] = "MISSION_MODE",
+};
+
+const char * const mhi_state_str[MHI_STATE_MAX] = {
+	[MHI_STATE_RESET] = "RESET",
+	[MHI_STATE_READY] = "READY",
+	[MHI_STATE_M0] = "M0",
+	[MHI_STATE_M1] = "M1",
+	[MHI_STATE_M2] = "M2",
+	[MHI_STATE_M3] = "M3",
+	[MHI_STATE_M3_FAST] = "M3_FAST",
+	[MHI_STATE_BHI] = "BHI",
+	[MHI_STATE_SYS_ERR] = "SYS_ERR",
+};
+
+static const char * const mhi_pm_state_str[] = {
+	[MHI_PM_STATE_DISABLE] = "DISABLE",
+	[MHI_PM_STATE_POR] = "POR",
+	[MHI_PM_STATE_M0] = "M0",
+	[MHI_PM_STATE_M2] = "M2",
+	[MHI_PM_STATE_M3_ENTER] = "M?->M3",
+	[MHI_PM_STATE_M3] = "M3",
+	[MHI_PM_STATE_M3_EXIT] = "M3->M0",
+	[MHI_PM_STATE_FW_DL_ERR] = "FW DL Error",
+	[MHI_PM_STATE_SYS_ERR_DETECT] = "SYS_ERR Detect",
+	[MHI_PM_STATE_SYS_ERR_PROCESS] = "SYS_ERR Process",
+	[MHI_PM_STATE_SHUTDOWN_PROCESS] = "SHUTDOWN Process",
+	[MHI_PM_STATE_LD_ERR_FATAL_DETECT] = "LD or Error Fatal Detect",
+};
+
+const char *to_mhi_pm_state_str(enum mhi_pm_state state)
+{
+	int index = find_last_bit((unsigned long *)&state, 32);
+
+	if (index >= ARRAY_SIZE(mhi_pm_state_str))
+		return "Invalid State";
+
+	return mhi_pm_state_str[index];
+}
+
+/* MHI protocol requires the transfer ring to be aligned with ring length */
+static int mhi_alloc_aligned_ring(struct mhi_controller *mhi_cntrl,
+				  struct mhi_ring *ring,
+				  u64 len)
+{
+	ring->alloc_size = len + (len - 1);
+	ring->pre_aligned = mhi_alloc_coherent(mhi_cntrl, ring->alloc_size,
+					       &ring->dma_handle, GFP_KERNEL);
+	if (!ring->pre_aligned)
+		return -ENOMEM;
+
+	ring->iommu_base = (ring->dma_handle + (len - 1)) & ~(len - 1);
+	ring->base = ring->pre_aligned + (ring->iommu_base - ring->dma_handle);
+
+	return 0;
+}
+
+void mhi_deinit_free_irq(struct mhi_controller *mhi_cntrl)
+{
+	int i;
+	struct mhi_event *mhi_event = mhi_cntrl->mhi_event;
+
+	for (i = 0; i < mhi_cntrl->total_ev_rings; i++, mhi_event++) {
+		if (mhi_event->offload_ev)
+			continue;
+
+		free_irq(mhi_cntrl->irq[mhi_event->irq], mhi_event);
+	}
+
+	free_irq(mhi_cntrl->irq[0], mhi_cntrl);
+}
+
+int mhi_init_irq_setup(struct mhi_controller *mhi_cntrl)
+{
+	struct mhi_event *mhi_event = mhi_cntrl->mhi_event;
+	struct device *dev = &mhi_cntrl->mhi_dev->dev;
+	int i, ret;
+
+	/* Setup BHI_INTVEC IRQ */
+	ret = request_threaded_irq(mhi_cntrl->irq[0], mhi_intvec_handler,
+				   mhi_intvec_threaded_handler,
+				   IRQF_SHARED | IRQF_NO_SUSPEND,
+				   "bhi", mhi_cntrl);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < mhi_cntrl->total_ev_rings; i++, mhi_event++) {
+		if (mhi_event->offload_ev)
+			continue;
+
+		ret = request_irq(mhi_cntrl->irq[mhi_event->irq],
+				  mhi_irq_handler,
+				  IRQF_SHARED | IRQF_NO_SUSPEND,
+				  "mhi", mhi_event);
+		if (ret) {
+			dev_err(dev, "Error requesting irq:%d for ev:%d\n",
+				mhi_cntrl->irq[mhi_event->irq], i);
+			goto error_request;
+		}
+	}
+
+	return 0;
+
+error_request:
+	for (--i, --mhi_event; i >= 0; i--, mhi_event--) {
+		if (mhi_event->offload_ev)
+			continue;
+
+		free_irq(mhi_cntrl->irq[mhi_event->irq], mhi_event);
+	}
+	free_irq(mhi_cntrl->irq[0], mhi_cntrl);
+
+	return ret;
+}
+
+void mhi_deinit_dev_ctxt(struct mhi_controller *mhi_cntrl)
+{
+	int i;
+	struct mhi_ctxt *mhi_ctxt = mhi_cntrl->mhi_ctxt;
+	struct mhi_cmd *mhi_cmd;
+	struct mhi_event *mhi_event;
+	struct mhi_ring *ring;
+
+	mhi_cmd = mhi_cntrl->mhi_cmd;
+	for (i = 0; i < NR_OF_CMD_RINGS; i++, mhi_cmd++) {
+		ring = &mhi_cmd->ring;
+		mhi_free_coherent(mhi_cntrl, ring->alloc_size,
+				  ring->pre_aligned, ring->dma_handle);
+		ring->base = NULL;
+		ring->iommu_base = 0;
+	}
+
+	mhi_free_coherent(mhi_cntrl,
+			  sizeof(*mhi_ctxt->cmd_ctxt) * NR_OF_CMD_RINGS,
+			  mhi_ctxt->cmd_ctxt, mhi_ctxt->cmd_ctxt_addr);
+
+	mhi_event = mhi_cntrl->mhi_event;
+	for (i = 0; i < mhi_cntrl->total_ev_rings; i++, mhi_event++) {
+		if (mhi_event->offload_ev)
+			continue;
+
+		ring = &mhi_event->ring;
+		mhi_free_coherent(mhi_cntrl, ring->alloc_size,
+				  ring->pre_aligned, ring->dma_handle);
+		ring->base = NULL;
+		ring->iommu_base = 0;
+	}
+
+	mhi_free_coherent(mhi_cntrl, sizeof(*mhi_ctxt->er_ctxt) *
+			  mhi_cntrl->total_ev_rings, mhi_ctxt->er_ctxt,
+			  mhi_ctxt->er_ctxt_addr);
+
+	mhi_free_coherent(mhi_cntrl, sizeof(*mhi_ctxt->chan_ctxt) *
+			  mhi_cntrl->max_chan, mhi_ctxt->chan_ctxt,
+			  mhi_ctxt->chan_ctxt_addr);
+
+	kfree(mhi_ctxt);
+	mhi_cntrl->mhi_ctxt = NULL;
+}
+
+int mhi_init_dev_ctxt(struct mhi_controller *mhi_cntrl)
+{
+	struct mhi_ctxt *mhi_ctxt;
+	struct mhi_chan_ctxt *chan_ctxt;
+	struct mhi_event_ctxt *er_ctxt;
+	struct mhi_cmd_ctxt *cmd_ctxt;
+	struct mhi_chan *mhi_chan;
+	struct mhi_event *mhi_event;
+	struct mhi_cmd *mhi_cmd;
+	u32 tmp;
+	int ret = -ENOMEM, i;
+
+	atomic_set(&mhi_cntrl->dev_wake, 0);
+	atomic_set(&mhi_cntrl->pending_pkts, 0);
+
+	mhi_ctxt = kzalloc(sizeof(*mhi_ctxt), GFP_KERNEL);
+	if (!mhi_ctxt)
+		return -ENOMEM;
+
+	/* Setup channel ctxt */
+	mhi_ctxt->chan_ctxt = mhi_alloc_coherent(mhi_cntrl,
+						 sizeof(*mhi_ctxt->chan_ctxt) *
+						 mhi_cntrl->max_chan,
+						 &mhi_ctxt->chan_ctxt_addr,
+						 GFP_KERNEL);
+	if (!mhi_ctxt->chan_ctxt)
+		goto error_alloc_chan_ctxt;
+
+	mhi_chan = mhi_cntrl->mhi_chan;
+	chan_ctxt = mhi_ctxt->chan_ctxt;
+	for (i = 0; i < mhi_cntrl->max_chan; i++, chan_ctxt++, mhi_chan++) {
+		/* Skip if it is an offload channel */
+		if (mhi_chan->offload_ch)
+			continue;
+
+		tmp = chan_ctxt->chcfg;
+		tmp &= ~CHAN_CTX_CHSTATE_MASK;
+		tmp |= (MHI_CH_STATE_DISABLED << CHAN_CTX_CHSTATE_SHIFT);
+		tmp &= ~CHAN_CTX_BRSTMODE_MASK;
+		tmp |= (mhi_chan->db_cfg.brstmode << CHAN_CTX_BRSTMODE_SHIFT);
+		tmp &= ~CHAN_CTX_POLLCFG_MASK;
+		tmp |= (mhi_chan->db_cfg.pollcfg << CHAN_CTX_POLLCFG_SHIFT);
+		chan_ctxt->chcfg = tmp;
+
+		chan_ctxt->chtype = mhi_chan->type;
+		chan_ctxt->erindex = mhi_chan->er_index;
+
+		mhi_chan->ch_state = MHI_CH_STATE_DISABLED;
+		mhi_chan->tre_ring.db_addr = (void __iomem *)&chan_ctxt->wp;
+	}
+
+	/* Setup event context */
+	mhi_ctxt->er_ctxt = mhi_alloc_coherent(mhi_cntrl,
+					       sizeof(*mhi_ctxt->er_ctxt) *
+					       mhi_cntrl->total_ev_rings,
+					       &mhi_ctxt->er_ctxt_addr,
+					       GFP_KERNEL);
+	if (!mhi_ctxt->er_ctxt)
+		goto error_alloc_er_ctxt;
+
+	er_ctxt = mhi_ctxt->er_ctxt;
+	mhi_event = mhi_cntrl->mhi_event;
+	for (i = 0; i < mhi_cntrl->total_ev_rings; i++, er_ctxt++,
+		     mhi_event++) {
+		struct mhi_ring *ring = &mhi_event->ring;
+
+		/* Skip if it is an offload event */
+		if (mhi_event->offload_ev)
+			continue;
+
+		tmp = er_ctxt->intmod;
+		tmp &= ~EV_CTX_INTMODC_MASK;
+		tmp &= ~EV_CTX_INTMODT_MASK;
+		tmp |= (mhi_event->intmod << EV_CTX_INTMODT_SHIFT);
+		er_ctxt->intmod = tmp;
+
+		er_ctxt->ertype = MHI_ER_TYPE_VALID;
+		er_ctxt->msivec = mhi_event->irq;
+		mhi_event->db_cfg.db_mode = true;
+
+		ring->el_size = sizeof(struct mhi_tre);
+		ring->len = ring->el_size * ring->elements;
+		ret = mhi_alloc_aligned_ring(mhi_cntrl, ring, ring->len);
+		if (ret)
+			goto error_alloc_er;
+
+		/*
+		 * If the read pointer equals to the write pointer, then the
+		 * ring is empty
+		 */
+		ring->rp = ring->wp = ring->base;
+		er_ctxt->rbase = ring->iommu_base;
+		er_ctxt->rp = er_ctxt->wp = er_ctxt->rbase;
+		er_ctxt->rlen = ring->len;
+		ring->ctxt_wp = &er_ctxt->wp;
+	}
+
+	/* Setup cmd context */
+	mhi_ctxt->cmd_ctxt = mhi_alloc_coherent(mhi_cntrl,
+						sizeof(*mhi_ctxt->cmd_ctxt) *
+						NR_OF_CMD_RINGS,
+						&mhi_ctxt->cmd_ctxt_addr,
+						GFP_KERNEL);
+	if (!mhi_ctxt->cmd_ctxt)
+		goto error_alloc_er;
+
+	mhi_cmd = mhi_cntrl->mhi_cmd;
+	cmd_ctxt = mhi_ctxt->cmd_ctxt;
+	for (i = 0; i < NR_OF_CMD_RINGS; i++, mhi_cmd++, cmd_ctxt++) {
+		struct mhi_ring *ring = &mhi_cmd->ring;
+
+		ring->el_size = sizeof(struct mhi_tre);
+		ring->elements = CMD_EL_PER_RING;
+		ring->len = ring->el_size * ring->elements;
+		ret = mhi_alloc_aligned_ring(mhi_cntrl, ring, ring->len);
+		if (ret)
+			goto error_alloc_cmd;
+
+		ring->rp = ring->wp = ring->base;
+		cmd_ctxt->rbase = ring->iommu_base;
+		cmd_ctxt->rp = cmd_ctxt->wp = cmd_ctxt->rbase;
+		cmd_ctxt->rlen = ring->len;
+		ring->ctxt_wp = &cmd_ctxt->wp;
+	}
+
+	mhi_cntrl->mhi_ctxt = mhi_ctxt;
+
+	return 0;
+
+error_alloc_cmd:
+	for (--i, --mhi_cmd; i >= 0; i--, mhi_cmd--) {
+		struct mhi_ring *ring = &mhi_cmd->ring;
+
+		mhi_free_coherent(mhi_cntrl, ring->alloc_size,
+				  ring->pre_aligned, ring->dma_handle);
+	}
+	mhi_free_coherent(mhi_cntrl,
+			  sizeof(*mhi_ctxt->cmd_ctxt) * NR_OF_CMD_RINGS,
+			  mhi_ctxt->cmd_ctxt, mhi_ctxt->cmd_ctxt_addr);
+	i = mhi_cntrl->total_ev_rings;
+	mhi_event = mhi_cntrl->mhi_event + i;
+
+error_alloc_er:
+	for (--i, --mhi_event; i >= 0; i--, mhi_event--) {
+		struct mhi_ring *ring = &mhi_event->ring;
+
+		if (mhi_event->offload_ev)
+			continue;
+
+		mhi_free_coherent(mhi_cntrl, ring->alloc_size,
+				  ring->pre_aligned, ring->dma_handle);
+	}
+	mhi_free_coherent(mhi_cntrl, sizeof(*mhi_ctxt->er_ctxt) *
+			  mhi_cntrl->total_ev_rings, mhi_ctxt->er_ctxt,
+			  mhi_ctxt->er_ctxt_addr);
+
+error_alloc_er_ctxt:
+	mhi_free_coherent(mhi_cntrl, sizeof(*mhi_ctxt->chan_ctxt) *
+			  mhi_cntrl->max_chan, mhi_ctxt->chan_ctxt,
+			  mhi_ctxt->chan_ctxt_addr);
+
+error_alloc_chan_ctxt:
+	kfree(mhi_ctxt);
+
+	return ret;
+}
+
+int mhi_init_mmio(struct mhi_controller *mhi_cntrl)
+{
+	u32 val;
+	int i, ret;
+	struct mhi_chan *mhi_chan;
+	struct mhi_event *mhi_event;
+	void __iomem *base = mhi_cntrl->regs;
+	struct device *dev = &mhi_cntrl->mhi_dev->dev;
+	struct {
+		u32 offset;
+		u32 mask;
+		u32 shift;
+		u32 val;
+	} reg_info[] = {
+		{
+			CCABAP_HIGHER, U32_MAX, 0,
+			upper_32_bits(mhi_cntrl->mhi_ctxt->chan_ctxt_addr),
+		},
+		{
+			CCABAP_LOWER, U32_MAX, 0,
+			lower_32_bits(mhi_cntrl->mhi_ctxt->chan_ctxt_addr),
+		},
+		{
+			ECABAP_HIGHER, U32_MAX, 0,
+			upper_32_bits(mhi_cntrl->mhi_ctxt->er_ctxt_addr),
+		},
+		{
+			ECABAP_LOWER, U32_MAX, 0,
+			lower_32_bits(mhi_cntrl->mhi_ctxt->er_ctxt_addr),
+		},
+		{
+			CRCBAP_HIGHER, U32_MAX, 0,
+			upper_32_bits(mhi_cntrl->mhi_ctxt->cmd_ctxt_addr),
+		},
+		{
+			CRCBAP_LOWER, U32_MAX, 0,
+			lower_32_bits(mhi_cntrl->mhi_ctxt->cmd_ctxt_addr),
+		},
+		{
+			MHICFG, MHICFG_NER_MASK, MHICFG_NER_SHIFT,
+			mhi_cntrl->total_ev_rings,
+		},
+		{
+			MHICFG, MHICFG_NHWER_MASK, MHICFG_NHWER_SHIFT,
+			mhi_cntrl->hw_ev_rings,
+		},
+		{
+			MHICTRLBASE_HIGHER, U32_MAX, 0,
+			upper_32_bits(mhi_cntrl->iova_start),
+		},
+		{
+			MHICTRLBASE_LOWER, U32_MAX, 0,
+			lower_32_bits(mhi_cntrl->iova_start),
+		},
+		{
+			MHIDATABASE_HIGHER, U32_MAX, 0,
+			upper_32_bits(mhi_cntrl->iova_start),
+		},
+		{
+			MHIDATABASE_LOWER, U32_MAX, 0,
+			lower_32_bits(mhi_cntrl->iova_start),
+		},
+		{
+			MHICTRLLIMIT_HIGHER, U32_MAX, 0,
+			upper_32_bits(mhi_cntrl->iova_stop),
+		},
+		{
+			MHICTRLLIMIT_LOWER, U32_MAX, 0,
+			lower_32_bits(mhi_cntrl->iova_stop),
+		},
+		{
+			MHIDATALIMIT_HIGHER, U32_MAX, 0,
+			upper_32_bits(mhi_cntrl->iova_stop),
+		},
+		{
+			MHIDATALIMIT_LOWER, U32_MAX, 0,
+			lower_32_bits(mhi_cntrl->iova_stop),
+		},
+		{ 0, 0, 0 }
+	};
+
+	dev_dbg(dev, "Initializing MHI registers\n");
+
+	/* Read channel db offset */
+	ret = mhi_read_reg_field(mhi_cntrl, base, CHDBOFF, CHDBOFF_CHDBOFF_MASK,
+				 CHDBOFF_CHDBOFF_SHIFT, &val);
+	if (ret) {
+		dev_err(dev, "Unable to read CHDBOFF register\n");
+		return -EIO;
+	}
+
+	/* Setup wake db */
+	mhi_cntrl->wake_db = base + val + (8 * MHI_DEV_WAKE_DB);
+	mhi_write_reg(mhi_cntrl, mhi_cntrl->wake_db, 4, 0);
+	mhi_write_reg(mhi_cntrl, mhi_cntrl->wake_db, 0, 0);
+	mhi_cntrl->wake_set = false;
+
+	/* Setup channel db address for each channel in tre_ring */
+	mhi_chan = mhi_cntrl->mhi_chan;
+	for (i = 0; i < mhi_cntrl->max_chan; i++, val += 8, mhi_chan++)
+		mhi_chan->tre_ring.db_addr = base + val;
+
+	/* Read event ring db offset */
+	ret = mhi_read_reg_field(mhi_cntrl, base, ERDBOFF, ERDBOFF_ERDBOFF_MASK,
+				 ERDBOFF_ERDBOFF_SHIFT, &val);
+	if (ret) {
+		dev_err(dev, "Unable to read ERDBOFF register\n");
+		return -EIO;
+	}
+
+	/* Setup event db address for each ev_ring */
+	mhi_event = mhi_cntrl->mhi_event;
+	for (i = 0; i < mhi_cntrl->total_ev_rings; i++, val += 8, mhi_event++) {
+		if (mhi_event->offload_ev)
+			continue;
+
+		mhi_event->ring.db_addr = base + val;
+	}
+
+	/* Setup DB register for primary CMD rings */
+	mhi_cntrl->mhi_cmd[PRIMARY_CMD_RING].ring.db_addr = base + CRDB_LOWER;
+
+	/* Write to MMIO registers */
+	for (i = 0; reg_info[i].offset; i++)
+		mhi_write_reg_field(mhi_cntrl, base, reg_info[i].offset,
+				    reg_info[i].mask, reg_info[i].shift,
+				    reg_info[i].val);
+
+	return 0;
+}
+
+void mhi_deinit_chan_ctxt(struct mhi_controller *mhi_cntrl,
+			  struct mhi_chan *mhi_chan)
+{
+	struct mhi_ring *buf_ring;
+	struct mhi_ring *tre_ring;
+	struct mhi_chan_ctxt *chan_ctxt;
+
+	buf_ring = &mhi_chan->buf_ring;
+	tre_ring = &mhi_chan->tre_ring;
+	chan_ctxt = &mhi_cntrl->mhi_ctxt->chan_ctxt[mhi_chan->chan];
+
+	mhi_free_coherent(mhi_cntrl, tre_ring->alloc_size,
+			  tre_ring->pre_aligned, tre_ring->dma_handle);
+	vfree(buf_ring->base);
+
+	buf_ring->base = tre_ring->base = NULL;
+	chan_ctxt->rbase = 0;
+}
+
+int mhi_init_chan_ctxt(struct mhi_controller *mhi_cntrl,
+		       struct mhi_chan *mhi_chan)
+{
+	struct mhi_ring *buf_ring;
+	struct mhi_ring *tre_ring;
+	struct mhi_chan_ctxt *chan_ctxt;
+	u32 tmp;
+	int ret;
+
+	buf_ring = &mhi_chan->buf_ring;
+	tre_ring = &mhi_chan->tre_ring;
+	tre_ring->el_size = sizeof(struct mhi_tre);
+	tre_ring->len = tre_ring->el_size * tre_ring->elements;
+	chan_ctxt = &mhi_cntrl->mhi_ctxt->chan_ctxt[mhi_chan->chan];
+	ret = mhi_alloc_aligned_ring(mhi_cntrl, tre_ring, tre_ring->len);
+	if (ret)
+		return -ENOMEM;
+
+	buf_ring->el_size = sizeof(struct mhi_buf_info);
+	buf_ring->len = buf_ring->el_size * buf_ring->elements;
+	buf_ring->base = vzalloc(buf_ring->len);
+
+	if (!buf_ring->base) {
+		mhi_free_coherent(mhi_cntrl, tre_ring->alloc_size,
+				  tre_ring->pre_aligned, tre_ring->dma_handle);
+		return -ENOMEM;
+	}
+
+	tmp = chan_ctxt->chcfg;
+	tmp &= ~CHAN_CTX_CHSTATE_MASK;
+	tmp |= (MHI_CH_STATE_ENABLED << CHAN_CTX_CHSTATE_SHIFT);
+	chan_ctxt->chcfg = tmp;
+
+	chan_ctxt->rbase = tre_ring->iommu_base;
+	chan_ctxt->rp = chan_ctxt->wp = chan_ctxt->rbase;
+	chan_ctxt->rlen = tre_ring->len;
+	tre_ring->ctxt_wp = &chan_ctxt->wp;
+
+	tre_ring->rp = tre_ring->wp = tre_ring->base;
+	buf_ring->rp = buf_ring->wp = buf_ring->base;
+	mhi_chan->db_cfg.db_mode = 1;
+
+	/* Update to all cores */
+	smp_wmb();
+
+	return 0;
+}
+
+static int parse_ev_cfg(struct mhi_controller *mhi_cntrl,
+			struct mhi_controller_config *config)
+{
+	struct mhi_event *mhi_event;
+	struct mhi_event_config *event_cfg;
+	struct device *dev = &mhi_cntrl->mhi_dev->dev;
+	int i, num;
+
+	num = config->num_events;
+	mhi_cntrl->total_ev_rings = num;
+	mhi_cntrl->mhi_event = kcalloc(num, sizeof(*mhi_cntrl->mhi_event),
+				       GFP_KERNEL);
+	if (!mhi_cntrl->mhi_event)
+		return -ENOMEM;
+
+	/* Populate event ring */
+	mhi_event = mhi_cntrl->mhi_event;
+	for (i = 0; i < num; i++) {
+		event_cfg = &config->event_cfg[i];
+
+		mhi_event->er_index = i;
+		mhi_event->ring.elements = event_cfg->num_elements;
+		mhi_event->intmod = event_cfg->irq_moderation_ms;
+		mhi_event->irq = event_cfg->irq;
+
+		if (event_cfg->channel != U32_MAX) {
+			/* This event ring has a dedicated channel */
+			mhi_event->chan = event_cfg->channel;
+			if (mhi_event->chan >= mhi_cntrl->max_chan) {
+				dev_err(dev,
+					"Event Ring channel not available\n");
+				goto error_ev_cfg;
+			}
+
+			mhi_event->mhi_chan =
+				&mhi_cntrl->mhi_chan[mhi_event->chan];
+		}
+
+		/* Priority is fixed to 1 for now */
+		mhi_event->priority = 1;
+
+		mhi_event->db_cfg.brstmode = event_cfg->mode;
+		if (MHI_INVALID_BRSTMODE(mhi_event->db_cfg.brstmode))
+			goto error_ev_cfg;
+
+		if (mhi_event->db_cfg.brstmode == MHI_DB_BRST_ENABLE)
+			mhi_event->db_cfg.process_db = mhi_db_brstmode;
+		else
+			mhi_event->db_cfg.process_db = mhi_db_brstmode_disable;
+
+		mhi_event->data_type = event_cfg->data_type;
+
+		switch (mhi_event->data_type) {
+		case MHI_ER_DATA:
+			mhi_event->process_event = mhi_process_data_event_ring;
+			break;
+		case MHI_ER_CTRL:
+			mhi_event->process_event = mhi_process_ctrl_ev_ring;
+			break;
+		default:
+			dev_err(dev, "Event Ring type not supported\n");
+			goto error_ev_cfg;
+		}
+
+		mhi_event->hw_ring = event_cfg->hardware_event;
+		if (mhi_event->hw_ring)
+			mhi_cntrl->hw_ev_rings++;
+		else
+			mhi_cntrl->sw_ev_rings++;
+
+		mhi_event->cl_manage = event_cfg->client_managed;
+		mhi_event->offload_ev = event_cfg->offload_channel;
+		mhi_event++;
+	}
+
+	/* We need IRQ for each event ring + additional one for BHI */
+	mhi_cntrl->nr_irqs_req = mhi_cntrl->total_ev_rings + 1;
+
+	return 0;
+
+error_ev_cfg:
+
+	kfree(mhi_cntrl->mhi_event);
+	return -EINVAL;
+}
+
+static int parse_ch_cfg(struct mhi_controller *mhi_cntrl,
+			struct mhi_controller_config *config)
+{
+	struct mhi_channel_config *ch_cfg;
+	struct device *dev = &mhi_cntrl->mhi_dev->dev;
+	int i;
+	u32 chan;
+
+	mhi_cntrl->max_chan = config->max_channels;
+
+	/*
+	 * The allocation of MHI channels can exceed 32KB in some scenarios,
+	 * so to avoid any memory possible allocation failures, vzalloc is
+	 * used here
+	 */
+	mhi_cntrl->mhi_chan = vzalloc(mhi_cntrl->max_chan *
+				      sizeof(*mhi_cntrl->mhi_chan));
+	if (!mhi_cntrl->mhi_chan)
+		return -ENOMEM;
+
+	INIT_LIST_HEAD(&mhi_cntrl->lpm_chans);
+
+	/* Populate channel configurations */
+	for (i = 0; i < config->num_channels; i++) {
+		struct mhi_chan *mhi_chan;
+
+		ch_cfg = &config->ch_cfg[i];
+
+		chan = ch_cfg->num;
+		if (chan >= mhi_cntrl->max_chan) {
+			dev_err(dev, "Channel %d not available\n", chan);
+			goto error_chan_cfg;
+		}
+
+		mhi_chan = &mhi_cntrl->mhi_chan[chan];
+		mhi_chan->name = ch_cfg->name;
+		mhi_chan->chan = chan;
+
+		mhi_chan->tre_ring.elements = ch_cfg->num_elements;
+		if (!mhi_chan->tre_ring.elements)
+			goto error_chan_cfg;
+
+		/*
+		 * For some channels, local ring length should be bigger than
+		 * the transfer ring length due to internal logical channels
+		 * in device. So host can queue much more buffers than transfer
+		 * ring length. Example, RSC channels should have a larger local
+		 * channel length than transfer ring length.
+		 */
+		mhi_chan->buf_ring.elements = ch_cfg->local_elements;
+		if (!mhi_chan->buf_ring.elements)
+			mhi_chan->buf_ring.elements = mhi_chan->tre_ring.elements;
+		mhi_chan->er_index = ch_cfg->event_ring;
+		mhi_chan->dir = ch_cfg->dir;
+
+		/*
+		 * For most channels, chtype is identical to channel directions.
+		 * So, if it is not defined then assign channel direction to
+		 * chtype
+		 */
+		mhi_chan->type = ch_cfg->type;
+		if (!mhi_chan->type)
+			mhi_chan->type = (enum mhi_ch_type)mhi_chan->dir;
+
+		mhi_chan->ee_mask = ch_cfg->ee_mask;
+		mhi_chan->db_cfg.pollcfg = ch_cfg->pollcfg;
+		mhi_chan->lpm_notify = ch_cfg->lpm_notify;
+		mhi_chan->offload_ch = ch_cfg->offload_channel;
+		mhi_chan->db_cfg.reset_req = ch_cfg->doorbell_mode_switch;
+		mhi_chan->pre_alloc = ch_cfg->auto_queue;
+		mhi_chan->auto_start = ch_cfg->auto_start;
+
+		/*
+		 * If MHI host allocates buffers, then the channel direction
+		 * should be DMA_FROM_DEVICE
+		 */
+		if (mhi_chan->pre_alloc && mhi_chan->dir != DMA_FROM_DEVICE) {
+			dev_err(dev, "Invalid channel configuration\n");
+			goto error_chan_cfg;
+		}
+
+		/*
+		 * Bi-directional and direction less channel must be an
+		 * offload channel
+		 */
+		if ((mhi_chan->dir == DMA_BIDIRECTIONAL ||
+		     mhi_chan->dir == DMA_NONE) && !mhi_chan->offload_ch) {
+			dev_err(dev, "Invalid channel configuration\n");
+			goto error_chan_cfg;
+		}
+
+		if (!mhi_chan->offload_ch) {
+			mhi_chan->db_cfg.brstmode = ch_cfg->doorbell;
+			if (MHI_INVALID_BRSTMODE(mhi_chan->db_cfg.brstmode)) {
+				dev_err(dev, "Invalid Door bell mode\n");
+				goto error_chan_cfg;
+			}
+		}
+
+		if (mhi_chan->db_cfg.brstmode == MHI_DB_BRST_ENABLE)
+			mhi_chan->db_cfg.process_db = mhi_db_brstmode;
+		else
+			mhi_chan->db_cfg.process_db = mhi_db_brstmode_disable;
+
+		mhi_chan->configured = true;
+
+		if (mhi_chan->lpm_notify)
+			list_add_tail(&mhi_chan->node, &mhi_cntrl->lpm_chans);
+	}
+
+	return 0;
+
+error_chan_cfg:
+	vfree(mhi_cntrl->mhi_chan);
+
+	return -EINVAL;
+}
+
+static int parse_config(struct mhi_controller *mhi_cntrl,
+			struct mhi_controller_config *config)
+{
+	int ret;
+
+	/* Parse MHI channel configuration */
+	ret = parse_ch_cfg(mhi_cntrl, config);
+	if (ret)
+		return ret;
+
+	/* Parse MHI event configuration */
+	ret = parse_ev_cfg(mhi_cntrl, config);
+	if (ret)
+		goto error_ev_cfg;
+
+	mhi_cntrl->timeout_ms = config->timeout_ms;
+	if (!mhi_cntrl->timeout_ms)
+		mhi_cntrl->timeout_ms = MHI_TIMEOUT_MS;
+
+	mhi_cntrl->bounce_buf = config->use_bounce_buf;
+	mhi_cntrl->buffer_len = config->buf_len;
+	if (!mhi_cntrl->buffer_len)
+		mhi_cntrl->buffer_len = MHI_MAX_MTU;
+
+	/* By default, host is allowed to ring DB in both M0 and M2 states */
+	mhi_cntrl->db_access = MHI_PM_M0 | MHI_PM_M2;
+	if (config->m2_no_db)
+		mhi_cntrl->db_access &= ~MHI_PM_M2;
+
+	return 0;
+
+error_ev_cfg:
+	vfree(mhi_cntrl->mhi_chan);
+
+	return ret;
+}
+
+int mhi_register_controller(struct mhi_controller *mhi_cntrl,
+			    struct mhi_controller_config *config)
+{
+	struct mhi_event *mhi_event;
+	struct mhi_chan *mhi_chan;
+	struct mhi_cmd *mhi_cmd;
+	struct mhi_device *mhi_dev;
+	u32 soc_info;
+	int ret, i;
+
+	if (!mhi_cntrl)
+		return -EINVAL;
+
+	if (!mhi_cntrl->runtime_get || !mhi_cntrl->runtime_put)
+		return -EINVAL;
+
+	if (!mhi_cntrl->status_cb || !mhi_cntrl->link_status)
+		return -EINVAL;
+
+	ret = parse_config(mhi_cntrl, config);
+	if (ret)
+		return -EINVAL;
+
+	mhi_cntrl->mhi_cmd = kcalloc(NR_OF_CMD_RINGS,
+				     sizeof(*mhi_cntrl->mhi_cmd), GFP_KERNEL);
+	if (!mhi_cntrl->mhi_cmd) {
+		ret = -ENOMEM;
+		goto error_alloc_cmd;
+	}
+
+	INIT_LIST_HEAD(&mhi_cntrl->transition_list);
+	mutex_init(&mhi_cntrl->pm_mutex);
+	rwlock_init(&mhi_cntrl->pm_lock);
+	spin_lock_init(&mhi_cntrl->transition_lock);
+	spin_lock_init(&mhi_cntrl->wlock);
+	INIT_WORK(&mhi_cntrl->st_worker, mhi_pm_st_worker);
+	INIT_WORK(&mhi_cntrl->syserr_worker, mhi_pm_sys_err_worker);
+	INIT_WORK(&mhi_cntrl->fw_worker, mhi_fw_load_worker);
+	init_waitqueue_head(&mhi_cntrl->state_event);
+
+	mhi_cmd = mhi_cntrl->mhi_cmd;
+	for (i = 0; i < NR_OF_CMD_RINGS; i++, mhi_cmd++)
+		spin_lock_init(&mhi_cmd->lock);
+
+	mhi_event = mhi_cntrl->mhi_event;
+	for (i = 0; i < mhi_cntrl->total_ev_rings; i++, mhi_event++) {
+		/* Skip for offload events */
+		if (mhi_event->offload_ev)
+			continue;
+
+		mhi_event->mhi_cntrl = mhi_cntrl;
+		spin_lock_init(&mhi_event->lock);
+		if (mhi_event->data_type == MHI_ER_CTRL)
+			tasklet_init(&mhi_event->task, mhi_ctrl_ev_task,
+				     (ulong)mhi_event);
+		else
+			tasklet_init(&mhi_event->task, mhi_ev_task,
+				     (ulong)mhi_event);
+	}
+
+	mhi_chan = mhi_cntrl->mhi_chan;
+	for (i = 0; i < mhi_cntrl->max_chan; i++, mhi_chan++) {
+		mutex_init(&mhi_chan->mutex);
+		init_completion(&mhi_chan->completion);
+		rwlock_init(&mhi_chan->lock);
+	}
+
+	if (mhi_cntrl->bounce_buf) {
+		mhi_cntrl->map_single = mhi_map_single_use_bb;
+		mhi_cntrl->unmap_single = mhi_unmap_single_use_bb;
+	} else {
+		mhi_cntrl->map_single = mhi_map_single_no_bb;
+		mhi_cntrl->unmap_single = mhi_unmap_single_no_bb;
+	}
+
+	/* Read the MHI device info */
+	ret = mhi_read_reg(mhi_cntrl, mhi_cntrl->regs,
+			   SOC_HW_VERSION_OFFS, &soc_info);
+	if (ret)
+		goto error_alloc_dev;
+
+	mhi_cntrl->family_number = (soc_info & SOC_HW_VERSION_FAM_NUM_BMSK) >>
+					SOC_HW_VERSION_FAM_NUM_SHFT;
+	mhi_cntrl->device_number = (soc_info & SOC_HW_VERSION_DEV_NUM_BMSK) >>
+					SOC_HW_VERSION_DEV_NUM_SHFT;
+	mhi_cntrl->major_version = (soc_info & SOC_HW_VERSION_MAJOR_VER_BMSK) >>
+					SOC_HW_VERSION_MAJOR_VER_SHFT;
+	mhi_cntrl->minor_version = (soc_info & SOC_HW_VERSION_MINOR_VER_BMSK) >>
+					SOC_HW_VERSION_MINOR_VER_SHFT;
+
+	/* Register controller with MHI bus */
+	mhi_dev = mhi_alloc_device(mhi_cntrl);
+	if (IS_ERR(mhi_dev)) {
+		dev_err(mhi_cntrl->cntrl_dev, "Failed to allocate MHI device\n");
+		ret = PTR_ERR(mhi_dev);
+		goto error_alloc_dev;
+	}
+
+	mhi_dev->dev_type = MHI_DEVICE_CONTROLLER;
+	mhi_dev->mhi_cntrl = mhi_cntrl;
+	dev_set_name(&mhi_dev->dev, "%s", dev_name(mhi_cntrl->cntrl_dev));
+
+	/* Init wakeup source */
+	device_init_wakeup(&mhi_dev->dev, true);
+
+	ret = device_add(&mhi_dev->dev);
+	if (ret)
+		goto error_add_dev;
+
+	mhi_cntrl->mhi_dev = mhi_dev;
+
+	return 0;
+
+error_add_dev:
+	put_device(&mhi_dev->dev);
+
+error_alloc_dev:
+	kfree(mhi_cntrl->mhi_cmd);
+
+error_alloc_cmd:
+	vfree(mhi_cntrl->mhi_chan);
+	kfree(mhi_cntrl->mhi_event);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(mhi_register_controller);
+
+void mhi_unregister_controller(struct mhi_controller *mhi_cntrl)
+{
+	struct mhi_device *mhi_dev = mhi_cntrl->mhi_dev;
+	struct mhi_chan *mhi_chan = mhi_cntrl->mhi_chan;
+	unsigned int i;
+
+	kfree(mhi_cntrl->mhi_cmd);
+	kfree(mhi_cntrl->mhi_event);
+
+	/* Drop the references to MHI devices created for channels */
+	for (i = 0; i < mhi_cntrl->max_chan; i++, mhi_chan++) {
+		if (!mhi_chan->mhi_dev)
+			continue;
+
+		put_device(&mhi_chan->mhi_dev->dev);
+	}
+	vfree(mhi_cntrl->mhi_chan);
+
+	device_del(&mhi_dev->dev);
+	put_device(&mhi_dev->dev);
+}
+EXPORT_SYMBOL_GPL(mhi_unregister_controller);
+
+int mhi_prepare_for_power_up(struct mhi_controller *mhi_cntrl)
+{
+	struct device *dev = &mhi_cntrl->mhi_dev->dev;
+	u32 bhie_off;
+	int ret;
+
+	mutex_lock(&mhi_cntrl->pm_mutex);
+
+	ret = mhi_init_dev_ctxt(mhi_cntrl);
+	if (ret)
+		goto error_dev_ctxt;
+
+	/*
+	 * Allocate RDDM table if specified, this table is for debugging purpose
+	 */
+	if (mhi_cntrl->rddm_size) {
+		mhi_alloc_bhie_table(mhi_cntrl, &mhi_cntrl->rddm_image,
+				     mhi_cntrl->rddm_size);
+
+		/*
+		 * This controller supports RDDM, so we need to manually clear
+		 * BHIE RX registers since POR values are undefined.
+		 */
+		ret = mhi_read_reg(mhi_cntrl, mhi_cntrl->regs, BHIEOFF,
+				   &bhie_off);
+		if (ret) {
+			dev_err(dev, "Error getting BHIE offset\n");
+			goto bhie_error;
+		}
+
+		mhi_cntrl->bhie = mhi_cntrl->regs + bhie_off;
+		memset_io(mhi_cntrl->bhie + BHIE_RXVECADDR_LOW_OFFS,
+			  0, BHIE_RXVECSTATUS_OFFS - BHIE_RXVECADDR_LOW_OFFS +
+			  4);
+
+		if (mhi_cntrl->rddm_image)
+			mhi_rddm_prepare(mhi_cntrl, mhi_cntrl->rddm_image);
+	}
+
+	mhi_cntrl->pre_init = true;
+
+	mutex_unlock(&mhi_cntrl->pm_mutex);
+
+	return 0;
+
+bhie_error:
+	if (mhi_cntrl->rddm_image) {
+		mhi_free_bhie_table(mhi_cntrl, mhi_cntrl->rddm_image);
+		mhi_cntrl->rddm_image = NULL;
+	}
+
+error_dev_ctxt:
+	mutex_unlock(&mhi_cntrl->pm_mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(mhi_prepare_for_power_up);
+
+void mhi_unprepare_after_power_down(struct mhi_controller *mhi_cntrl)
+{
+	if (mhi_cntrl->fbc_image) {
+		mhi_free_bhie_table(mhi_cntrl, mhi_cntrl->fbc_image);
+		mhi_cntrl->fbc_image = NULL;
+	}
+
+	if (mhi_cntrl->rddm_image) {
+		mhi_free_bhie_table(mhi_cntrl, mhi_cntrl->rddm_image);
+		mhi_cntrl->rddm_image = NULL;
+	}
+
+	mhi_deinit_dev_ctxt(mhi_cntrl);
+	mhi_cntrl->pre_init = false;
+}
+EXPORT_SYMBOL_GPL(mhi_unprepare_after_power_down);
+
+static void mhi_release_device(struct device *dev)
+{
+	struct mhi_device *mhi_dev = to_mhi_device(dev);
+
+	/*
+	 * We need to set the mhi_chan->mhi_dev to NULL here since the MHI
+	 * devices for the channels will only get created if the mhi_dev
+	 * associated with it is NULL. This scenario will happen during the
+	 * controller suspend and resume.
+	 */
+	if (mhi_dev->ul_chan)
+		mhi_dev->ul_chan->mhi_dev = NULL;
+
+	if (mhi_dev->dl_chan)
+		mhi_dev->dl_chan->mhi_dev = NULL;
+
+	kfree(mhi_dev);
+}
+
+struct mhi_device *mhi_alloc_device(struct mhi_controller *mhi_cntrl)
+{
+	struct mhi_device *mhi_dev;
+	struct device *dev;
+
+	mhi_dev = kzalloc(sizeof(*mhi_dev), GFP_KERNEL);
+	if (!mhi_dev)
+		return ERR_PTR(-ENOMEM);
+
+	dev = &mhi_dev->dev;
+	device_initialize(dev);
+	dev->bus = &mhi_bus_type;
+	dev->release = mhi_release_device;
+	dev->parent = mhi_cntrl->cntrl_dev;
+	mhi_dev->mhi_cntrl = mhi_cntrl;
+	mhi_dev->dev_wake = 0;
+
+	return mhi_dev;
+}
+
+static int mhi_driver_probe(struct device *dev)
+{
+	struct mhi_device *mhi_dev = to_mhi_device(dev);
+	struct mhi_controller *mhi_cntrl = mhi_dev->mhi_cntrl;
+	struct device_driver *drv = dev->driver;
+	struct mhi_driver *mhi_drv = to_mhi_driver(drv);
+	struct mhi_event *mhi_event;
+	struct mhi_chan *ul_chan = mhi_dev->ul_chan;
+	struct mhi_chan *dl_chan = mhi_dev->dl_chan;
+	int ret;
+
+	/* Bring device out of LPM */
+	ret = mhi_device_get_sync(mhi_dev);
+	if (ret)
+		return ret;
+
+	ret = -EINVAL;
+
+	if (ul_chan) {
+		/*
+		 * If channel supports LPM notifications then status_cb should
+		 * be provided
+		 */
+		if (ul_chan->lpm_notify && !mhi_drv->status_cb)
+			goto exit_probe;
+
+		/* For non-offload channels then xfer_cb should be provided */
+		if (!ul_chan->offload_ch && !mhi_drv->ul_xfer_cb)
+			goto exit_probe;
+
+		ul_chan->xfer_cb = mhi_drv->ul_xfer_cb;
+		if (ul_chan->auto_start) {
+			ret = mhi_prepare_channel(mhi_cntrl, ul_chan);
+			if (ret)
+				goto exit_probe;
+		}
+	}
+
+	if (dl_chan) {
+		/*
+		 * If channel supports LPM notifications then status_cb should
+		 * be provided
+		 */
+		if (dl_chan->lpm_notify && !mhi_drv->status_cb)
+			goto exit_probe;
+
+		/* For non-offload channels then xfer_cb should be provided */
+		if (!dl_chan->offload_ch && !mhi_drv->dl_xfer_cb)
+			goto exit_probe;
+
+		mhi_event = &mhi_cntrl->mhi_event[dl_chan->er_index];
+
+		/*
+		 * If the channel event ring is managed by client, then
+		 * status_cb must be provided so that the framework can
+		 * notify pending data
+		 */
+		if (mhi_event->cl_manage && !mhi_drv->status_cb)
+			goto exit_probe;
+
+		dl_chan->xfer_cb = mhi_drv->dl_xfer_cb;
+	}
+
+	/* Call the user provided probe function */
+	ret = mhi_drv->probe(mhi_dev, mhi_dev->id);
+	if (ret)
+		goto exit_probe;
+
+	if (dl_chan && dl_chan->auto_start)
+		mhi_prepare_channel(mhi_cntrl, dl_chan);
+
+	mhi_device_put(mhi_dev);
+
+	return ret;
+
+exit_probe:
+	mhi_unprepare_from_transfer(mhi_dev);
+
+	mhi_device_put(mhi_dev);
+
+	return ret;
+}
+
+static int mhi_driver_remove(struct device *dev)
+{
+	struct mhi_device *mhi_dev = to_mhi_device(dev);
+	struct mhi_driver *mhi_drv = to_mhi_driver(dev->driver);
+	struct mhi_controller *mhi_cntrl = mhi_dev->mhi_cntrl;
+	struct mhi_chan *mhi_chan;
+	enum mhi_ch_state ch_state[] = {
+		MHI_CH_STATE_DISABLED,
+		MHI_CH_STATE_DISABLED
+	};
+	int dir;
+
+	/* Skip if it is a controller device */
+	if (mhi_dev->dev_type == MHI_DEVICE_CONTROLLER)
+		return 0;
+
+	/* Reset both channels */
+	for (dir = 0; dir < 2; dir++) {
+		mhi_chan = dir ? mhi_dev->ul_chan : mhi_dev->dl_chan;
+
+		if (!mhi_chan)
+			continue;
+
+		/* Wake all threads waiting for completion */
+		write_lock_irq(&mhi_chan->lock);
+		mhi_chan->ccs = MHI_EV_CC_INVALID;
+		complete_all(&mhi_chan->completion);
+		write_unlock_irq(&mhi_chan->lock);
+
+		/* Set the channel state to disabled */
+		mutex_lock(&mhi_chan->mutex);
+		write_lock_irq(&mhi_chan->lock);
+		ch_state[dir] = mhi_chan->ch_state;
+		mhi_chan->ch_state = MHI_CH_STATE_SUSPENDED;
+		write_unlock_irq(&mhi_chan->lock);
+
+		/* Reset the non-offload channel */
+		if (!mhi_chan->offload_ch)
+			mhi_reset_chan(mhi_cntrl, mhi_chan);
+
+		mutex_unlock(&mhi_chan->mutex);
+	}
+
+	mhi_drv->remove(mhi_dev);
+
+	/* De-init channel if it was enabled */
+	for (dir = 0; dir < 2; dir++) {
+		mhi_chan = dir ? mhi_dev->ul_chan : mhi_dev->dl_chan;
+
+		if (!mhi_chan)
+			continue;
+
+		mutex_lock(&mhi_chan->mutex);
+
+		if (ch_state[dir] == MHI_CH_STATE_ENABLED &&
+		    !mhi_chan->offload_ch)
+			mhi_deinit_chan_ctxt(mhi_cntrl, mhi_chan);
+
+		mhi_chan->ch_state = MHI_CH_STATE_DISABLED;
+
+		mutex_unlock(&mhi_chan->mutex);
+	}
+
+	read_lock_bh(&mhi_cntrl->pm_lock);
+	while (mhi_dev->dev_wake)
+		mhi_device_put(mhi_dev);
+	read_unlock_bh(&mhi_cntrl->pm_lock);
+
+	return 0;
+}
+
+int __mhi_driver_register(struct mhi_driver *mhi_drv, struct module *owner)
+{
+	struct device_driver *driver = &mhi_drv->driver;
+
+	if (!mhi_drv->probe || !mhi_drv->remove)
+		return -EINVAL;
+
+	driver->bus = &mhi_bus_type;
+	driver->owner = owner;
+	driver->probe = mhi_driver_probe;
+	driver->remove = mhi_driver_remove;
+
+	return driver_register(driver);
+}
+EXPORT_SYMBOL_GPL(__mhi_driver_register);
+
+void mhi_driver_unregister(struct mhi_driver *mhi_drv)
+{
+	driver_unregister(&mhi_drv->driver);
+}
+EXPORT_SYMBOL_GPL(mhi_driver_unregister);
+
+static int mhi_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+	struct mhi_device *mhi_dev = to_mhi_device(dev);
+
+	return add_uevent_var(env, "MODALIAS=" MHI_DEVICE_MODALIAS_FMT,
+					mhi_dev->chan_name);
+}
+
+static int mhi_match(struct device *dev, struct device_driver *drv)
+{
+	struct mhi_device *mhi_dev = to_mhi_device(dev);
+	struct mhi_driver *mhi_drv = to_mhi_driver(drv);
+	const struct mhi_device_id *id;
+
+	/*
+	 * If the device is a controller type then there is no client driver
+	 * associated with it
+	 */
+	if (mhi_dev->dev_type == MHI_DEVICE_CONTROLLER)
+		return 0;
+
+	for (id = mhi_drv->id_table; id->chan[0]; id++)
+		if (!strcmp(mhi_dev->chan_name, id->chan)) {
+			mhi_dev->id = id;
+			return 1;
+		}
+
+	return 0;
+};
+
+struct bus_type mhi_bus_type = {
+	.name = "mhi",
+	.dev_name = "mhi",
+	.match = mhi_match,
+	.uevent = mhi_uevent,
+};
+
+static int __init mhi_init(void)
+{
+	return bus_register(&mhi_bus_type);
+}
+
+static void __exit mhi_exit(void)
+{
+	bus_unregister(&mhi_bus_type);
+}
+
+postcore_initcall(mhi_init);
+module_exit(mhi_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("MHI Host Interface");
diff --git a/drivers/bus/mhi/core/internal.h b/drivers/bus/mhi/core/internal.h
new file mode 100644
index 0000000..5deadfa
--- /dev/null
+++ b/drivers/bus/mhi/core/internal.h
@@ -0,0 +1,687 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
+ *
+ */
+
+#ifndef _MHI_INT_H
+#define _MHI_INT_H
+
+#include <linux/mhi.h>
+
+extern struct bus_type mhi_bus_type;
+
+/* MHI MMIO register mapping */
+#define PCI_INVALID_READ(val) (val == U32_MAX)
+
+#define MHIREGLEN (0x0)
+#define MHIREGLEN_MHIREGLEN_MASK (0xFFFFFFFF)
+#define MHIREGLEN_MHIREGLEN_SHIFT (0)
+
+#define MHIVER (0x8)
+#define MHIVER_MHIVER_MASK (0xFFFFFFFF)
+#define MHIVER_MHIVER_SHIFT (0)
+
+#define MHICFG (0x10)
+#define MHICFG_NHWER_MASK (0xFF000000)
+#define MHICFG_NHWER_SHIFT (24)
+#define MHICFG_NER_MASK (0xFF0000)
+#define MHICFG_NER_SHIFT (16)
+#define MHICFG_NHWCH_MASK (0xFF00)
+#define MHICFG_NHWCH_SHIFT (8)
+#define MHICFG_NCH_MASK (0xFF)
+#define MHICFG_NCH_SHIFT (0)
+
+#define CHDBOFF (0x18)
+#define CHDBOFF_CHDBOFF_MASK (0xFFFFFFFF)
+#define CHDBOFF_CHDBOFF_SHIFT (0)
+
+#define ERDBOFF (0x20)
+#define ERDBOFF_ERDBOFF_MASK (0xFFFFFFFF)
+#define ERDBOFF_ERDBOFF_SHIFT (0)
+
+#define BHIOFF (0x28)
+#define BHIOFF_BHIOFF_MASK (0xFFFFFFFF)
+#define BHIOFF_BHIOFF_SHIFT (0)
+
+#define BHIEOFF (0x2C)
+#define BHIEOFF_BHIEOFF_MASK (0xFFFFFFFF)
+#define BHIEOFF_BHIEOFF_SHIFT (0)
+
+#define DEBUGOFF (0x30)
+#define DEBUGOFF_DEBUGOFF_MASK (0xFFFFFFFF)
+#define DEBUGOFF_DEBUGOFF_SHIFT (0)
+
+#define MHICTRL (0x38)
+#define MHICTRL_MHISTATE_MASK (0x0000FF00)
+#define MHICTRL_MHISTATE_SHIFT (8)
+#define MHICTRL_RESET_MASK (0x2)
+#define MHICTRL_RESET_SHIFT (1)
+
+#define MHISTATUS (0x48)
+#define MHISTATUS_MHISTATE_MASK (0x0000FF00)
+#define MHISTATUS_MHISTATE_SHIFT (8)
+#define MHISTATUS_SYSERR_MASK (0x4)
+#define MHISTATUS_SYSERR_SHIFT (2)
+#define MHISTATUS_READY_MASK (0x1)
+#define MHISTATUS_READY_SHIFT (0)
+
+#define CCABAP_LOWER (0x58)
+#define CCABAP_LOWER_CCABAP_LOWER_MASK (0xFFFFFFFF)
+#define CCABAP_LOWER_CCABAP_LOWER_SHIFT (0)
+
+#define CCABAP_HIGHER (0x5C)
+#define CCABAP_HIGHER_CCABAP_HIGHER_MASK (0xFFFFFFFF)
+#define CCABAP_HIGHER_CCABAP_HIGHER_SHIFT (0)
+
+#define ECABAP_LOWER (0x60)
+#define ECABAP_LOWER_ECABAP_LOWER_MASK (0xFFFFFFFF)
+#define ECABAP_LOWER_ECABAP_LOWER_SHIFT (0)
+
+#define ECABAP_HIGHER (0x64)
+#define ECABAP_HIGHER_ECABAP_HIGHER_MASK (0xFFFFFFFF)
+#define ECABAP_HIGHER_ECABAP_HIGHER_SHIFT (0)
+
+#define CRCBAP_LOWER (0x68)
+#define CRCBAP_LOWER_CRCBAP_LOWER_MASK (0xFFFFFFFF)
+#define CRCBAP_LOWER_CRCBAP_LOWER_SHIFT (0)
+
+#define CRCBAP_HIGHER (0x6C)
+#define CRCBAP_HIGHER_CRCBAP_HIGHER_MASK (0xFFFFFFFF)
+#define CRCBAP_HIGHER_CRCBAP_HIGHER_SHIFT (0)
+
+#define CRDB_LOWER (0x70)
+#define CRDB_LOWER_CRDB_LOWER_MASK (0xFFFFFFFF)
+#define CRDB_LOWER_CRDB_LOWER_SHIFT (0)
+
+#define CRDB_HIGHER (0x74)
+#define CRDB_HIGHER_CRDB_HIGHER_MASK (0xFFFFFFFF)
+#define CRDB_HIGHER_CRDB_HIGHER_SHIFT (0)
+
+#define MHICTRLBASE_LOWER (0x80)
+#define MHICTRLBASE_LOWER_MHICTRLBASE_LOWER_MASK (0xFFFFFFFF)
+#define MHICTRLBASE_LOWER_MHICTRLBASE_LOWER_SHIFT (0)
+
+#define MHICTRLBASE_HIGHER (0x84)
+#define MHICTRLBASE_HIGHER_MHICTRLBASE_HIGHER_MASK (0xFFFFFFFF)
+#define MHICTRLBASE_HIGHER_MHICTRLBASE_HIGHER_SHIFT (0)
+
+#define MHICTRLLIMIT_LOWER (0x88)
+#define MHICTRLLIMIT_LOWER_MHICTRLLIMIT_LOWER_MASK (0xFFFFFFFF)
+#define MHICTRLLIMIT_LOWER_MHICTRLLIMIT_LOWER_SHIFT (0)
+
+#define MHICTRLLIMIT_HIGHER (0x8C)
+#define MHICTRLLIMIT_HIGHER_MHICTRLLIMIT_HIGHER_MASK (0xFFFFFFFF)
+#define MHICTRLLIMIT_HIGHER_MHICTRLLIMIT_HIGHER_SHIFT (0)
+
+#define MHIDATABASE_LOWER (0x98)
+#define MHIDATABASE_LOWER_MHIDATABASE_LOWER_MASK (0xFFFFFFFF)
+#define MHIDATABASE_LOWER_MHIDATABASE_LOWER_SHIFT (0)
+
+#define MHIDATABASE_HIGHER (0x9C)
+#define MHIDATABASE_HIGHER_MHIDATABASE_HIGHER_MASK (0xFFFFFFFF)
+#define MHIDATABASE_HIGHER_MHIDATABASE_HIGHER_SHIFT (0)
+
+#define MHIDATALIMIT_LOWER (0xA0)
+#define MHIDATALIMIT_LOWER_MHIDATALIMIT_LOWER_MASK (0xFFFFFFFF)
+#define MHIDATALIMIT_LOWER_MHIDATALIMIT_LOWER_SHIFT (0)
+
+#define MHIDATALIMIT_HIGHER (0xA4)
+#define MHIDATALIMIT_HIGHER_MHIDATALIMIT_HIGHER_MASK (0xFFFFFFFF)
+#define MHIDATALIMIT_HIGHER_MHIDATALIMIT_HIGHER_SHIFT (0)
+
+/* Host request register */
+#define MHI_SOC_RESET_REQ_OFFSET (0xB0)
+#define MHI_SOC_RESET_REQ BIT(0)
+
+/* MHI BHI offfsets */
+#define BHI_BHIVERSION_MINOR (0x00)
+#define BHI_BHIVERSION_MAJOR (0x04)
+#define BHI_IMGADDR_LOW (0x08)
+#define BHI_IMGADDR_HIGH (0x0C)
+#define BHI_IMGSIZE (0x10)
+#define BHI_RSVD1 (0x14)
+#define BHI_IMGTXDB (0x18)
+#define BHI_TXDB_SEQNUM_BMSK (0x3FFFFFFF)
+#define BHI_TXDB_SEQNUM_SHFT (0)
+#define BHI_RSVD2 (0x1C)
+#define BHI_INTVEC (0x20)
+#define BHI_RSVD3 (0x24)
+#define BHI_EXECENV (0x28)
+#define BHI_STATUS (0x2C)
+#define BHI_ERRCODE (0x30)
+#define BHI_ERRDBG1 (0x34)
+#define BHI_ERRDBG2 (0x38)
+#define BHI_ERRDBG3 (0x3C)
+#define BHI_SERIALNU (0x40)
+#define BHI_SBLANTIROLLVER (0x44)
+#define BHI_NUMSEG (0x48)
+#define BHI_MSMHWID(n) (0x4C + (0x4 * n))
+#define BHI_OEMPKHASH(n) (0x64 + (0x4 * n))
+#define BHI_RSVD5 (0xC4)
+#define BHI_STATUS_MASK (0xC0000000)
+#define BHI_STATUS_SHIFT (30)
+#define BHI_STATUS_ERROR (3)
+#define BHI_STATUS_SUCCESS (2)
+#define BHI_STATUS_RESET (0)
+
+/* MHI BHIE offsets */
+#define BHIE_MSMSOCID_OFFS (0x0000)
+#define BHIE_TXVECADDR_LOW_OFFS (0x002C)
+#define BHIE_TXVECADDR_HIGH_OFFS (0x0030)
+#define BHIE_TXVECSIZE_OFFS (0x0034)
+#define BHIE_TXVECDB_OFFS (0x003C)
+#define BHIE_TXVECDB_SEQNUM_BMSK (0x3FFFFFFF)
+#define BHIE_TXVECDB_SEQNUM_SHFT (0)
+#define BHIE_TXVECSTATUS_OFFS (0x0044)
+#define BHIE_TXVECSTATUS_SEQNUM_BMSK (0x3FFFFFFF)
+#define BHIE_TXVECSTATUS_SEQNUM_SHFT (0)
+#define BHIE_TXVECSTATUS_STATUS_BMSK (0xC0000000)
+#define BHIE_TXVECSTATUS_STATUS_SHFT (30)
+#define BHIE_TXVECSTATUS_STATUS_RESET (0x00)
+#define BHIE_TXVECSTATUS_STATUS_XFER_COMPL (0x02)
+#define BHIE_TXVECSTATUS_STATUS_ERROR (0x03)
+#define BHIE_RXVECADDR_LOW_OFFS (0x0060)
+#define BHIE_RXVECADDR_HIGH_OFFS (0x0064)
+#define BHIE_RXVECSIZE_OFFS (0x0068)
+#define BHIE_RXVECDB_OFFS (0x0070)
+#define BHIE_RXVECDB_SEQNUM_BMSK (0x3FFFFFFF)
+#define BHIE_RXVECDB_SEQNUM_SHFT (0)
+#define BHIE_RXVECSTATUS_OFFS (0x0078)
+#define BHIE_RXVECSTATUS_SEQNUM_BMSK (0x3FFFFFFF)
+#define BHIE_RXVECSTATUS_SEQNUM_SHFT (0)
+#define BHIE_RXVECSTATUS_STATUS_BMSK (0xC0000000)
+#define BHIE_RXVECSTATUS_STATUS_SHFT (30)
+#define BHIE_RXVECSTATUS_STATUS_RESET (0x00)
+#define BHIE_RXVECSTATUS_STATUS_XFER_COMPL (0x02)
+#define BHIE_RXVECSTATUS_STATUS_ERROR (0x03)
+
+#define SOC_HW_VERSION_OFFS (0x224)
+#define SOC_HW_VERSION_FAM_NUM_BMSK (0xF0000000)
+#define SOC_HW_VERSION_FAM_NUM_SHFT (28)
+#define SOC_HW_VERSION_DEV_NUM_BMSK (0x0FFF0000)
+#define SOC_HW_VERSION_DEV_NUM_SHFT (16)
+#define SOC_HW_VERSION_MAJOR_VER_BMSK (0x0000FF00)
+#define SOC_HW_VERSION_MAJOR_VER_SHFT (8)
+#define SOC_HW_VERSION_MINOR_VER_BMSK (0x000000FF)
+#define SOC_HW_VERSION_MINOR_VER_SHFT (0)
+
+#define EV_CTX_RESERVED_MASK GENMASK(7, 0)
+#define EV_CTX_INTMODC_MASK GENMASK(15, 8)
+#define EV_CTX_INTMODC_SHIFT 8
+#define EV_CTX_INTMODT_MASK GENMASK(31, 16)
+#define EV_CTX_INTMODT_SHIFT 16
+struct mhi_event_ctxt {
+	__u32 intmod;
+	__u32 ertype;
+	__u32 msivec;
+
+	__u64 rbase __packed __aligned(4);
+	__u64 rlen __packed __aligned(4);
+	__u64 rp __packed __aligned(4);
+	__u64 wp __packed __aligned(4);
+};
+
+#define CHAN_CTX_CHSTATE_MASK GENMASK(7, 0)
+#define CHAN_CTX_CHSTATE_SHIFT 0
+#define CHAN_CTX_BRSTMODE_MASK GENMASK(9, 8)
+#define CHAN_CTX_BRSTMODE_SHIFT 8
+#define CHAN_CTX_POLLCFG_MASK GENMASK(15, 10)
+#define CHAN_CTX_POLLCFG_SHIFT 10
+#define CHAN_CTX_RESERVED_MASK GENMASK(31, 16)
+struct mhi_chan_ctxt {
+	__u32 chcfg;
+	__u32 chtype;
+	__u32 erindex;
+
+	__u64 rbase __packed __aligned(4);
+	__u64 rlen __packed __aligned(4);
+	__u64 rp __packed __aligned(4);
+	__u64 wp __packed __aligned(4);
+};
+
+struct mhi_cmd_ctxt {
+	__u32 reserved0;
+	__u32 reserved1;
+	__u32 reserved2;
+
+	__u64 rbase __packed __aligned(4);
+	__u64 rlen __packed __aligned(4);
+	__u64 rp __packed __aligned(4);
+	__u64 wp __packed __aligned(4);
+};
+
+struct mhi_ctxt {
+	struct mhi_event_ctxt *er_ctxt;
+	struct mhi_chan_ctxt *chan_ctxt;
+	struct mhi_cmd_ctxt *cmd_ctxt;
+	dma_addr_t er_ctxt_addr;
+	dma_addr_t chan_ctxt_addr;
+	dma_addr_t cmd_ctxt_addr;
+};
+
+struct mhi_tre {
+	u64 ptr;
+	u32 dword[2];
+};
+
+struct bhi_vec_entry {
+	u64 dma_addr;
+	u64 size;
+};
+
+enum mhi_cmd_type {
+	MHI_CMD_NOP = 1,
+	MHI_CMD_RESET_CHAN = 16,
+	MHI_CMD_STOP_CHAN = 17,
+	MHI_CMD_START_CHAN = 18,
+};
+
+/* No operation command */
+#define MHI_TRE_CMD_NOOP_PTR (0)
+#define MHI_TRE_CMD_NOOP_DWORD0 (0)
+#define MHI_TRE_CMD_NOOP_DWORD1 (MHI_CMD_NOP << 16)
+
+/* Channel reset command */
+#define MHI_TRE_CMD_RESET_PTR (0)
+#define MHI_TRE_CMD_RESET_DWORD0 (0)
+#define MHI_TRE_CMD_RESET_DWORD1(chid) ((chid << 24) | \
+					(MHI_CMD_RESET_CHAN << 16))
+
+/* Channel stop command */
+#define MHI_TRE_CMD_STOP_PTR (0)
+#define MHI_TRE_CMD_STOP_DWORD0 (0)
+#define MHI_TRE_CMD_STOP_DWORD1(chid) ((chid << 24) | \
+				       (MHI_CMD_STOP_CHAN << 16))
+
+/* Channel start command */
+#define MHI_TRE_CMD_START_PTR (0)
+#define MHI_TRE_CMD_START_DWORD0 (0)
+#define MHI_TRE_CMD_START_DWORD1(chid) ((chid << 24) | \
+					(MHI_CMD_START_CHAN << 16))
+
+#define MHI_TRE_GET_CMD_CHID(tre) (((tre)->dword[1] >> 24) & 0xFF)
+#define MHI_TRE_GET_CMD_TYPE(tre) (((tre)->dword[1] >> 16) & 0xFF)
+
+/* Event descriptor macros */
+#define MHI_TRE_EV_PTR(ptr) (ptr)
+#define MHI_TRE_EV_DWORD0(code, len) ((code << 24) | len)
+#define MHI_TRE_EV_DWORD1(chid, type) ((chid << 24) | (type << 16))
+#define MHI_TRE_GET_EV_PTR(tre) ((tre)->ptr)
+#define MHI_TRE_GET_EV_CODE(tre) (((tre)->dword[0] >> 24) & 0xFF)
+#define MHI_TRE_GET_EV_LEN(tre) ((tre)->dword[0] & 0xFFFF)
+#define MHI_TRE_GET_EV_CHID(tre) (((tre)->dword[1] >> 24) & 0xFF)
+#define MHI_TRE_GET_EV_TYPE(tre) (((tre)->dword[1] >> 16) & 0xFF)
+#define MHI_TRE_GET_EV_STATE(tre) (((tre)->dword[0] >> 24) & 0xFF)
+#define MHI_TRE_GET_EV_EXECENV(tre) (((tre)->dword[0] >> 24) & 0xFF)
+#define MHI_TRE_GET_EV_SEQ(tre) ((tre)->dword[0])
+#define MHI_TRE_GET_EV_TIME(tre) ((tre)->ptr)
+#define MHI_TRE_GET_EV_COOKIE(tre) lower_32_bits((tre)->ptr)
+#define MHI_TRE_GET_EV_VEID(tre) (((tre)->dword[0] >> 16) & 0xFF)
+#define MHI_TRE_GET_EV_LINKSPEED(tre) (((tre)->dword[1] >> 24) & 0xFF)
+#define MHI_TRE_GET_EV_LINKWIDTH(tre) ((tre)->dword[0] & 0xFF)
+
+/* Transfer descriptor macros */
+#define MHI_TRE_DATA_PTR(ptr) (ptr)
+#define MHI_TRE_DATA_DWORD0(len) (len & MHI_MAX_MTU)
+#define MHI_TRE_DATA_DWORD1(bei, ieot, ieob, chain) ((2 << 16) | (bei << 10) \
+	| (ieot << 9) | (ieob << 8) | chain)
+
+/* RSC transfer descriptor macros */
+#define MHI_RSCTRE_DATA_PTR(ptr, len) (((u64)len << 48) | ptr)
+#define MHI_RSCTRE_DATA_DWORD0(cookie) (cookie)
+#define MHI_RSCTRE_DATA_DWORD1 (MHI_PKT_TYPE_COALESCING << 16)
+
+enum mhi_pkt_type {
+	MHI_PKT_TYPE_INVALID = 0x0,
+	MHI_PKT_TYPE_NOOP_CMD = 0x1,
+	MHI_PKT_TYPE_TRANSFER = 0x2,
+	MHI_PKT_TYPE_COALESCING = 0x8,
+	MHI_PKT_TYPE_RESET_CHAN_CMD = 0x10,
+	MHI_PKT_TYPE_STOP_CHAN_CMD = 0x11,
+	MHI_PKT_TYPE_START_CHAN_CMD = 0x12,
+	MHI_PKT_TYPE_STATE_CHANGE_EVENT = 0x20,
+	MHI_PKT_TYPE_CMD_COMPLETION_EVENT = 0x21,
+	MHI_PKT_TYPE_TX_EVENT = 0x22,
+	MHI_PKT_TYPE_RSC_TX_EVENT = 0x28,
+	MHI_PKT_TYPE_EE_EVENT = 0x40,
+	MHI_PKT_TYPE_TSYNC_EVENT = 0x48,
+	MHI_PKT_TYPE_BW_REQ_EVENT = 0x50,
+	MHI_PKT_TYPE_STALE_EVENT, /* internal event */
+};
+
+/* MHI transfer completion events */
+enum mhi_ev_ccs {
+	MHI_EV_CC_INVALID = 0x0,
+	MHI_EV_CC_SUCCESS = 0x1,
+	MHI_EV_CC_EOT = 0x2, /* End of transfer event */
+	MHI_EV_CC_OVERFLOW = 0x3,
+	MHI_EV_CC_EOB = 0x4, /* End of block event */
+	MHI_EV_CC_OOB = 0x5, /* Out of block event */
+	MHI_EV_CC_DB_MODE = 0x6,
+	MHI_EV_CC_UNDEFINED_ERR = 0x10,
+	MHI_EV_CC_BAD_TRE = 0x11,
+};
+
+enum mhi_ch_state {
+	MHI_CH_STATE_DISABLED = 0x0,
+	MHI_CH_STATE_ENABLED = 0x1,
+	MHI_CH_STATE_RUNNING = 0x2,
+	MHI_CH_STATE_SUSPENDED = 0x3,
+	MHI_CH_STATE_STOP = 0x4,
+	MHI_CH_STATE_ERROR = 0x5,
+};
+
+#define MHI_INVALID_BRSTMODE(mode) (mode != MHI_DB_BRST_DISABLE && \
+				    mode != MHI_DB_BRST_ENABLE)
+
+extern const char * const mhi_ee_str[MHI_EE_MAX];
+#define TO_MHI_EXEC_STR(ee) (((ee) >= MHI_EE_MAX) ? \
+			     "INVALID_EE" : mhi_ee_str[ee])
+
+#define MHI_IN_PBL(ee) (ee == MHI_EE_PBL || ee == MHI_EE_PTHRU || \
+			ee == MHI_EE_EDL)
+
+#define MHI_IN_MISSION_MODE(ee) (ee == MHI_EE_AMSS || ee == MHI_EE_WFW)
+
+enum dev_st_transition {
+	DEV_ST_TRANSITION_PBL,
+	DEV_ST_TRANSITION_READY,
+	DEV_ST_TRANSITION_SBL,
+	DEV_ST_TRANSITION_MISSION_MODE,
+	DEV_ST_TRANSITION_MAX,
+};
+
+extern const char * const dev_state_tran_str[DEV_ST_TRANSITION_MAX];
+#define TO_DEV_STATE_TRANS_STR(state) (((state) >= DEV_ST_TRANSITION_MAX) ? \
+				"INVALID_STATE" : dev_state_tran_str[state])
+
+extern const char * const mhi_state_str[MHI_STATE_MAX];
+#define TO_MHI_STATE_STR(state) ((state >= MHI_STATE_MAX || \
+				  !mhi_state_str[state]) ? \
+				"INVALID_STATE" : mhi_state_str[state])
+
+/* internal power states */
+enum mhi_pm_state {
+	MHI_PM_STATE_DISABLE,
+	MHI_PM_STATE_POR,
+	MHI_PM_STATE_M0,
+	MHI_PM_STATE_M2,
+	MHI_PM_STATE_M3_ENTER,
+	MHI_PM_STATE_M3,
+	MHI_PM_STATE_M3_EXIT,
+	MHI_PM_STATE_FW_DL_ERR,
+	MHI_PM_STATE_SYS_ERR_DETECT,
+	MHI_PM_STATE_SYS_ERR_PROCESS,
+	MHI_PM_STATE_SHUTDOWN_PROCESS,
+	MHI_PM_STATE_LD_ERR_FATAL_DETECT,
+	MHI_PM_STATE_MAX
+};
+
+#define MHI_PM_DISABLE			BIT(0)
+#define MHI_PM_POR			BIT(1)
+#define MHI_PM_M0			BIT(2)
+#define MHI_PM_M2			BIT(3)
+#define MHI_PM_M3_ENTER			BIT(4)
+#define MHI_PM_M3			BIT(5)
+#define MHI_PM_M3_EXIT			BIT(6)
+/* firmware download failure state */
+#define MHI_PM_FW_DL_ERR		BIT(7)
+#define MHI_PM_SYS_ERR_DETECT		BIT(8)
+#define MHI_PM_SYS_ERR_PROCESS		BIT(9)
+#define MHI_PM_SHUTDOWN_PROCESS		BIT(10)
+/* link not accessible */
+#define MHI_PM_LD_ERR_FATAL_DETECT	BIT(11)
+
+#define MHI_REG_ACCESS_VALID(pm_state) ((pm_state & (MHI_PM_POR | MHI_PM_M0 | \
+		MHI_PM_M2 | MHI_PM_M3_ENTER | MHI_PM_M3_EXIT | \
+		MHI_PM_SYS_ERR_DETECT | MHI_PM_SYS_ERR_PROCESS | \
+		MHI_PM_SHUTDOWN_PROCESS | MHI_PM_FW_DL_ERR)))
+#define MHI_PM_IN_ERROR_STATE(pm_state) (pm_state >= MHI_PM_FW_DL_ERR)
+#define MHI_PM_IN_FATAL_STATE(pm_state) (pm_state == MHI_PM_LD_ERR_FATAL_DETECT)
+#define MHI_DB_ACCESS_VALID(mhi_cntrl) (mhi_cntrl->pm_state & \
+					mhi_cntrl->db_access)
+#define MHI_WAKE_DB_CLEAR_VALID(pm_state) (pm_state & (MHI_PM_M0 | \
+						MHI_PM_M2 | MHI_PM_M3_EXIT))
+#define MHI_WAKE_DB_SET_VALID(pm_state) (pm_state & MHI_PM_M2)
+#define MHI_WAKE_DB_FORCE_SET_VALID(pm_state) MHI_WAKE_DB_CLEAR_VALID(pm_state)
+#define MHI_EVENT_ACCESS_INVALID(pm_state) (pm_state == MHI_PM_DISABLE || \
+					    MHI_PM_IN_ERROR_STATE(pm_state))
+#define MHI_PM_IN_SUSPEND_STATE(pm_state) (pm_state & \
+					   (MHI_PM_M3_ENTER | MHI_PM_M3))
+
+#define NR_OF_CMD_RINGS			1
+#define CMD_EL_PER_RING			128
+#define PRIMARY_CMD_RING		0
+#define MHI_DEV_WAKE_DB			127
+#define MHI_MAX_MTU			0xffff
+
+enum mhi_er_type {
+	MHI_ER_TYPE_INVALID = 0x0,
+	MHI_ER_TYPE_VALID = 0x1,
+};
+
+struct db_cfg {
+	bool reset_req;
+	bool db_mode;
+	u32 pollcfg;
+	enum mhi_db_brst_mode brstmode;
+	dma_addr_t db_val;
+	void (*process_db)(struct mhi_controller *mhi_cntrl,
+			   struct db_cfg *db_cfg, void __iomem *io_addr,
+			   dma_addr_t db_val);
+};
+
+struct mhi_pm_transitions {
+	enum mhi_pm_state from_state;
+	u32 to_states;
+};
+
+struct state_transition {
+	struct list_head node;
+	enum dev_st_transition state;
+};
+
+struct mhi_ring {
+	dma_addr_t dma_handle;
+	dma_addr_t iommu_base;
+	u64 *ctxt_wp; /* point to ctxt wp */
+	void *pre_aligned;
+	void *base;
+	void *rp;
+	void *wp;
+	size_t el_size;
+	size_t len;
+	size_t elements;
+	size_t alloc_size;
+	void __iomem *db_addr;
+};
+
+struct mhi_cmd {
+	struct mhi_ring ring;
+	spinlock_t lock;
+};
+
+struct mhi_buf_info {
+	void *v_addr;
+	void *bb_addr;
+	void *wp;
+	void *cb_buf;
+	dma_addr_t p_addr;
+	size_t len;
+	enum dma_data_direction dir;
+	bool used; /* Indicates whether the buffer is used or not */
+	bool pre_mapped; /* Already pre-mapped by client */
+};
+
+struct mhi_event {
+	struct mhi_controller *mhi_cntrl;
+	struct mhi_chan *mhi_chan; /* dedicated to channel */
+	u32 er_index;
+	u32 intmod;
+	u32 irq;
+	int chan; /* this event ring is dedicated to a channel (optional) */
+	u32 priority;
+	enum mhi_er_data_type data_type;
+	struct mhi_ring ring;
+	struct db_cfg db_cfg;
+	struct tasklet_struct task;
+	spinlock_t lock;
+	int (*process_event)(struct mhi_controller *mhi_cntrl,
+			     struct mhi_event *mhi_event,
+			     u32 event_quota);
+	bool hw_ring;
+	bool cl_manage;
+	bool offload_ev; /* managed by a device driver */
+};
+
+struct mhi_chan {
+	const char *name;
+	/*
+	 * Important: When consuming, increment tre_ring first and when
+	 * releasing, decrement buf_ring first. If tre_ring has space, buf_ring
+	 * is guranteed to have space so we do not need to check both rings.
+	 */
+	struct mhi_ring buf_ring;
+	struct mhi_ring tre_ring;
+	u32 chan;
+	u32 er_index;
+	u32 intmod;
+	enum mhi_ch_type type;
+	enum dma_data_direction dir;
+	struct db_cfg db_cfg;
+	enum mhi_ch_ee_mask ee_mask;
+	enum mhi_ch_state ch_state;
+	enum mhi_ev_ccs ccs;
+	struct mhi_device *mhi_dev;
+	void (*xfer_cb)(struct mhi_device *mhi_dev, struct mhi_result *result);
+	struct mutex mutex;
+	struct completion completion;
+	rwlock_t lock;
+	struct list_head node;
+	bool lpm_notify;
+	bool configured;
+	bool offload_ch;
+	bool pre_alloc;
+	bool auto_start;
+	bool wake_capable;
+};
+
+/* Default MHI timeout */
+#define MHI_TIMEOUT_MS (1000)
+
+struct mhi_device *mhi_alloc_device(struct mhi_controller *mhi_cntrl);
+
+int mhi_destroy_device(struct device *dev, void *data);
+void mhi_create_devices(struct mhi_controller *mhi_cntrl);
+
+int mhi_alloc_bhie_table(struct mhi_controller *mhi_cntrl,
+			 struct image_info **image_info, size_t alloc_size);
+void mhi_free_bhie_table(struct mhi_controller *mhi_cntrl,
+			 struct image_info *image_info);
+
+/* Power management APIs */
+enum mhi_pm_state __must_check mhi_tryset_pm_state(
+					struct mhi_controller *mhi_cntrl,
+					enum mhi_pm_state state);
+const char *to_mhi_pm_state_str(enum mhi_pm_state state);
+enum mhi_ee_type mhi_get_exec_env(struct mhi_controller *mhi_cntrl);
+int mhi_queue_state_transition(struct mhi_controller *mhi_cntrl,
+			       enum dev_st_transition state);
+void mhi_pm_st_worker(struct work_struct *work);
+void mhi_pm_sys_err_worker(struct work_struct *work);
+void mhi_fw_load_worker(struct work_struct *work);
+int mhi_ready_state_transition(struct mhi_controller *mhi_cntrl);
+void mhi_ctrl_ev_task(unsigned long data);
+int mhi_pm_m0_transition(struct mhi_controller *mhi_cntrl);
+void mhi_pm_m1_transition(struct mhi_controller *mhi_cntrl);
+int mhi_pm_m3_transition(struct mhi_controller *mhi_cntrl);
+int __mhi_device_get_sync(struct mhi_controller *mhi_cntrl);
+int mhi_send_cmd(struct mhi_controller *mhi_cntrl, struct mhi_chan *mhi_chan,
+		 enum mhi_cmd_type cmd);
+
+/* Register access methods */
+void mhi_db_brstmode(struct mhi_controller *mhi_cntrl, struct db_cfg *db_cfg,
+		     void __iomem *db_addr, dma_addr_t db_val);
+void mhi_db_brstmode_disable(struct mhi_controller *mhi_cntrl,
+			     struct db_cfg *db_mode, void __iomem *db_addr,
+			     dma_addr_t db_val);
+int __must_check mhi_read_reg(struct mhi_controller *mhi_cntrl,
+			      void __iomem *base, u32 offset, u32 *out);
+int __must_check mhi_read_reg_field(struct mhi_controller *mhi_cntrl,
+				    void __iomem *base, u32 offset, u32 mask,
+				    u32 shift, u32 *out);
+void mhi_write_reg(struct mhi_controller *mhi_cntrl, void __iomem *base,
+		   u32 offset, u32 val);
+void mhi_write_reg_field(struct mhi_controller *mhi_cntrl, void __iomem *base,
+			 u32 offset, u32 mask, u32 shift, u32 val);
+void mhi_ring_er_db(struct mhi_event *mhi_event);
+void mhi_write_db(struct mhi_controller *mhi_cntrl, void __iomem *db_addr,
+		  dma_addr_t db_val);
+void mhi_ring_cmd_db(struct mhi_controller *mhi_cntrl, struct mhi_cmd *mhi_cmd);
+void mhi_ring_chan_db(struct mhi_controller *mhi_cntrl,
+		      struct mhi_chan *mhi_chan);
+
+/* Initialization methods */
+int mhi_init_mmio(struct mhi_controller *mhi_cntrl);
+int mhi_init_dev_ctxt(struct mhi_controller *mhi_cntrl);
+void mhi_deinit_dev_ctxt(struct mhi_controller *mhi_cntrl);
+int mhi_init_irq_setup(struct mhi_controller *mhi_cntrl);
+void mhi_deinit_free_irq(struct mhi_controller *mhi_cntrl);
+void mhi_rddm_prepare(struct mhi_controller *mhi_cntrl,
+		      struct image_info *img_info);
+int mhi_prepare_channel(struct mhi_controller *mhi_cntrl,
+			struct mhi_chan *mhi_chan);
+int mhi_init_chan_ctxt(struct mhi_controller *mhi_cntrl,
+		       struct mhi_chan *mhi_chan);
+void mhi_deinit_chan_ctxt(struct mhi_controller *mhi_cntrl,
+			  struct mhi_chan *mhi_chan);
+void mhi_reset_chan(struct mhi_controller *mhi_cntrl,
+		    struct mhi_chan *mhi_chan);
+
+/* Memory allocation methods */
+static inline void *mhi_alloc_coherent(struct mhi_controller *mhi_cntrl,
+				       size_t size,
+				       dma_addr_t *dma_handle,
+				       gfp_t gfp)
+{
+	void *buf = dma_alloc_coherent(mhi_cntrl->cntrl_dev, size, dma_handle,
+				       gfp);
+
+	return buf;
+}
+
+static inline void mhi_free_coherent(struct mhi_controller *mhi_cntrl,
+				     size_t size,
+				     void *vaddr,
+				     dma_addr_t dma_handle)
+{
+	dma_free_coherent(mhi_cntrl->cntrl_dev, size, vaddr, dma_handle);
+}
+
+/* Event processing methods */
+void mhi_ctrl_ev_task(unsigned long data);
+void mhi_ev_task(unsigned long data);
+int mhi_process_data_event_ring(struct mhi_controller *mhi_cntrl,
+				struct mhi_event *mhi_event, u32 event_quota);
+int mhi_process_ctrl_ev_ring(struct mhi_controller *mhi_cntrl,
+			     struct mhi_event *mhi_event, u32 event_quota);
+
+/* ISR handlers */
+irqreturn_t mhi_irq_handler(int irq_number, void *dev);
+irqreturn_t mhi_intvec_threaded_handler(int irq_number, void *dev);
+irqreturn_t mhi_intvec_handler(int irq_number, void *dev);
+
+int mhi_gen_tre(struct mhi_controller *mhi_cntrl, struct mhi_chan *mhi_chan,
+		void *buf, void *cb, size_t buf_len, enum mhi_flags flags);
+
+int mhi_map_single_no_bb(struct mhi_controller *mhi_cntrl,
+			 struct mhi_buf_info *buf_info);
+int mhi_map_single_use_bb(struct mhi_controller *mhi_cntrl,
+			  struct mhi_buf_info *buf_info);
+void mhi_unmap_single_no_bb(struct mhi_controller *mhi_cntrl,
+			    struct mhi_buf_info *buf_info);
+void mhi_unmap_single_use_bb(struct mhi_controller *mhi_cntrl,
+			     struct mhi_buf_info *buf_info);
+
+#endif /* _MHI_INT_H */
diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
new file mode 100644
index 0000000..eb4256b
--- /dev/null
+++ b/drivers/bus/mhi/core/main.c
@@ -0,0 +1,1529 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/dma-direction.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/mhi.h>
+#include <linux/module.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
+#include "internal.h"
+
+int __must_check mhi_read_reg(struct mhi_controller *mhi_cntrl,
+			      void __iomem *base, u32 offset, u32 *out)
+{
+	u32 tmp = readl(base + offset);
+
+	/* If there is any unexpected value, query the link status */
+	if (PCI_INVALID_READ(tmp) &&
+	    mhi_cntrl->link_status(mhi_cntrl))
+		return -EIO;
+
+	*out = tmp;
+
+	return 0;
+}
+
+int __must_check mhi_read_reg_field(struct mhi_controller *mhi_cntrl,
+				    void __iomem *base, u32 offset,
+				    u32 mask, u32 shift, u32 *out)
+{
+	u32 tmp;
+	int ret;
+
+	ret = mhi_read_reg(mhi_cntrl, base, offset, &tmp);
+	if (ret)
+		return ret;
+
+	*out = (tmp & mask) >> shift;
+
+	return 0;
+}
+
+void mhi_write_reg(struct mhi_controller *mhi_cntrl, void __iomem *base,
+		   u32 offset, u32 val)
+{
+	writel(val, base + offset);
+}
+
+void mhi_write_reg_field(struct mhi_controller *mhi_cntrl, void __iomem *base,
+			 u32 offset, u32 mask, u32 shift, u32 val)
+{
+	int ret;
+	u32 tmp;
+
+	ret = mhi_read_reg(mhi_cntrl, base, offset, &tmp);
+	if (ret)
+		return;
+
+	tmp &= ~mask;
+	tmp |= (val << shift);
+	mhi_write_reg(mhi_cntrl, base, offset, tmp);
+}
+
+void mhi_write_db(struct mhi_controller *mhi_cntrl, void __iomem *db_addr,
+		  dma_addr_t db_val)
+{
+	mhi_write_reg(mhi_cntrl, db_addr, 4, upper_32_bits(db_val));
+	mhi_write_reg(mhi_cntrl, db_addr, 0, lower_32_bits(db_val));
+}
+
+void mhi_db_brstmode(struct mhi_controller *mhi_cntrl,
+		     struct db_cfg *db_cfg,
+		     void __iomem *db_addr,
+		     dma_addr_t db_val)
+{
+	if (db_cfg->db_mode) {
+		db_cfg->db_val = db_val;
+		mhi_write_db(mhi_cntrl, db_addr, db_val);
+		db_cfg->db_mode = 0;
+	}
+}
+
+void mhi_db_brstmode_disable(struct mhi_controller *mhi_cntrl,
+			     struct db_cfg *db_cfg,
+			     void __iomem *db_addr,
+			     dma_addr_t db_val)
+{
+	db_cfg->db_val = db_val;
+	mhi_write_db(mhi_cntrl, db_addr, db_val);
+}
+
+void mhi_ring_er_db(struct mhi_event *mhi_event)
+{
+	struct mhi_ring *ring = &mhi_event->ring;
+
+	mhi_event->db_cfg.process_db(mhi_event->mhi_cntrl, &mhi_event->db_cfg,
+				     ring->db_addr, *ring->ctxt_wp);
+}
+
+void mhi_ring_cmd_db(struct mhi_controller *mhi_cntrl, struct mhi_cmd *mhi_cmd)
+{
+	dma_addr_t db;
+	struct mhi_ring *ring = &mhi_cmd->ring;
+
+	db = ring->iommu_base + (ring->wp - ring->base);
+	*ring->ctxt_wp = db;
+	mhi_write_db(mhi_cntrl, ring->db_addr, db);
+}
+
+void mhi_ring_chan_db(struct mhi_controller *mhi_cntrl,
+		      struct mhi_chan *mhi_chan)
+{
+	struct mhi_ring *ring = &mhi_chan->tre_ring;
+	dma_addr_t db;
+
+	db = ring->iommu_base + (ring->wp - ring->base);
+	*ring->ctxt_wp = db;
+	mhi_chan->db_cfg.process_db(mhi_cntrl, &mhi_chan->db_cfg,
+				    ring->db_addr, db);
+}
+
+enum mhi_ee_type mhi_get_exec_env(struct mhi_controller *mhi_cntrl)
+{
+	u32 exec;
+	int ret = mhi_read_reg(mhi_cntrl, mhi_cntrl->bhi, BHI_EXECENV, &exec);
+
+	return (ret) ? MHI_EE_MAX : exec;
+}
+
+enum mhi_state mhi_get_mhi_state(struct mhi_controller *mhi_cntrl)
+{
+	u32 state;
+	int ret = mhi_read_reg_field(mhi_cntrl, mhi_cntrl->regs, MHISTATUS,
+				     MHISTATUS_MHISTATE_MASK,
+				     MHISTATUS_MHISTATE_SHIFT, &state);
+	return ret ? MHI_STATE_MAX : state;
+}
+
+int mhi_map_single_no_bb(struct mhi_controller *mhi_cntrl,
+			 struct mhi_buf_info *buf_info)
+{
+	buf_info->p_addr = dma_map_single(mhi_cntrl->cntrl_dev,
+					  buf_info->v_addr, buf_info->len,
+					  buf_info->dir);
+	if (dma_mapping_error(mhi_cntrl->cntrl_dev, buf_info->p_addr))
+		return -ENOMEM;
+
+	return 0;
+}
+
+int mhi_map_single_use_bb(struct mhi_controller *mhi_cntrl,
+			  struct mhi_buf_info *buf_info)
+{
+	void *buf = mhi_alloc_coherent(mhi_cntrl, buf_info->len,
+				       &buf_info->p_addr, GFP_ATOMIC);
+
+	if (!buf)
+		return -ENOMEM;
+
+	if (buf_info->dir == DMA_TO_DEVICE)
+		memcpy(buf, buf_info->v_addr, buf_info->len);
+
+	buf_info->bb_addr = buf;
+
+	return 0;
+}
+
+void mhi_unmap_single_no_bb(struct mhi_controller *mhi_cntrl,
+			    struct mhi_buf_info *buf_info)
+{
+	dma_unmap_single(mhi_cntrl->cntrl_dev, buf_info->p_addr, buf_info->len,
+			 buf_info->dir);
+}
+
+void mhi_unmap_single_use_bb(struct mhi_controller *mhi_cntrl,
+			     struct mhi_buf_info *buf_info)
+{
+	if (buf_info->dir == DMA_FROM_DEVICE)
+		memcpy(buf_info->v_addr, buf_info->bb_addr, buf_info->len);
+
+	mhi_free_coherent(mhi_cntrl, buf_info->len, buf_info->bb_addr,
+			  buf_info->p_addr);
+}
+
+static int get_nr_avail_ring_elements(struct mhi_controller *mhi_cntrl,
+				      struct mhi_ring *ring)
+{
+	int nr_el;
+
+	if (ring->wp < ring->rp) {
+		nr_el = ((ring->rp - ring->wp) / ring->el_size) - 1;
+	} else {
+		nr_el = (ring->rp - ring->base) / ring->el_size;
+		nr_el += ((ring->base + ring->len - ring->wp) /
+			  ring->el_size) - 1;
+	}
+
+	return nr_el;
+}
+
+static void *mhi_to_virtual(struct mhi_ring *ring, dma_addr_t addr)
+{
+	return (addr - ring->iommu_base) + ring->base;
+}
+
+static void mhi_add_ring_element(struct mhi_controller *mhi_cntrl,
+				 struct mhi_ring *ring)
+{
+	ring->wp += ring->el_size;
+	if (ring->wp >= (ring->base + ring->len))
+		ring->wp = ring->base;
+	/* smp update */
+	smp_wmb();
+}
+
+static void mhi_del_ring_element(struct mhi_controller *mhi_cntrl,
+				 struct mhi_ring *ring)
+{
+	ring->rp += ring->el_size;
+	if (ring->rp >= (ring->base + ring->len))
+		ring->rp = ring->base;
+	/* smp update */
+	smp_wmb();
+}
+
+int mhi_destroy_device(struct device *dev, void *data)
+{
+	struct mhi_device *mhi_dev;
+	struct mhi_controller *mhi_cntrl;
+
+	if (dev->bus != &mhi_bus_type)
+		return 0;
+
+	mhi_dev = to_mhi_device(dev);
+	mhi_cntrl = mhi_dev->mhi_cntrl;
+
+	/* Only destroy virtual devices thats attached to bus */
+	if (mhi_dev->dev_type == MHI_DEVICE_CONTROLLER)
+		return 0;
+
+	/*
+	 * For the suspend and resume case, this function will get called
+	 * without mhi_unregister_controller(). Hence, we need to drop the
+	 * references to mhi_dev created for ul and dl channels. We can
+	 * be sure that there will be no instances of mhi_dev left after
+	 * this.
+	 */
+	if (mhi_dev->ul_chan)
+		put_device(&mhi_dev->ul_chan->mhi_dev->dev);
+
+	if (mhi_dev->dl_chan)
+		put_device(&mhi_dev->dl_chan->mhi_dev->dev);
+
+	dev_dbg(&mhi_cntrl->mhi_dev->dev, "destroy device for chan:%s\n",
+		 mhi_dev->chan_name);
+
+	/* Notify the client and remove the device from MHI bus */
+	device_del(dev);
+	put_device(dev);
+
+	return 0;
+}
+
+static void mhi_notify(struct mhi_device *mhi_dev, enum mhi_callback cb_reason)
+{
+	struct mhi_driver *mhi_drv;
+
+	if (!mhi_dev->dev.driver)
+		return;
+
+	mhi_drv = to_mhi_driver(mhi_dev->dev.driver);
+
+	if (mhi_drv->status_cb)
+		mhi_drv->status_cb(mhi_dev, cb_reason);
+}
+
+/* Bind MHI channels to MHI devices */
+void mhi_create_devices(struct mhi_controller *mhi_cntrl)
+{
+	struct mhi_chan *mhi_chan;
+	struct mhi_device *mhi_dev;
+	struct device *dev = &mhi_cntrl->mhi_dev->dev;
+	int i, ret;
+
+	mhi_chan = mhi_cntrl->mhi_chan;
+	for (i = 0; i < mhi_cntrl->max_chan; i++, mhi_chan++) {
+		if (!mhi_chan->configured || mhi_chan->mhi_dev ||
+		    !(mhi_chan->ee_mask & BIT(mhi_cntrl->ee)))
+			continue;
+		mhi_dev = mhi_alloc_device(mhi_cntrl);
+		if (!mhi_dev)
+			return;
+
+		mhi_dev->dev_type = MHI_DEVICE_XFER;
+		switch (mhi_chan->dir) {
+		case DMA_TO_DEVICE:
+			mhi_dev->ul_chan = mhi_chan;
+			mhi_dev->ul_chan_id = mhi_chan->chan;
+			break;
+		case DMA_FROM_DEVICE:
+			/* We use dl_chan as offload channels */
+			mhi_dev->dl_chan = mhi_chan;
+			mhi_dev->dl_chan_id = mhi_chan->chan;
+			break;
+		default:
+			dev_err(dev, "Direction not supported\n");
+			put_device(&mhi_dev->dev);
+			return;
+		}
+
+		get_device(&mhi_dev->dev);
+		mhi_chan->mhi_dev = mhi_dev;
+
+		/* Check next channel if it matches */
+		if ((i + 1) < mhi_cntrl->max_chan && mhi_chan[1].configured) {
+			if (!strcmp(mhi_chan[1].name, mhi_chan->name)) {
+				i++;
+				mhi_chan++;
+				if (mhi_chan->dir == DMA_TO_DEVICE) {
+					mhi_dev->ul_chan = mhi_chan;
+					mhi_dev->ul_chan_id = mhi_chan->chan;
+				} else {
+					mhi_dev->dl_chan = mhi_chan;
+					mhi_dev->dl_chan_id = mhi_chan->chan;
+				}
+				get_device(&mhi_dev->dev);
+				mhi_chan->mhi_dev = mhi_dev;
+			}
+		}
+
+		/* Channel name is same for both UL and DL */
+		mhi_dev->chan_name = mhi_chan->name;
+		dev_set_name(&mhi_dev->dev, "%04x_%s", mhi_chan->chan,
+			     mhi_dev->chan_name);
+
+		/* Init wakeup source if available */
+		if (mhi_dev->dl_chan && mhi_dev->dl_chan->wake_capable)
+			device_init_wakeup(&mhi_dev->dev, true);
+
+		ret = device_add(&mhi_dev->dev);
+		if (ret)
+			put_device(&mhi_dev->dev);
+	}
+}
+
+irqreturn_t mhi_irq_handler(int irq_number, void *dev)
+{
+	struct mhi_event *mhi_event = dev;
+	struct mhi_controller *mhi_cntrl = mhi_event->mhi_cntrl;
+	struct mhi_event_ctxt *er_ctxt =
+		&mhi_cntrl->mhi_ctxt->er_ctxt[mhi_event->er_index];
+	struct mhi_ring *ev_ring = &mhi_event->ring;
+	void *dev_rp = mhi_to_virtual(ev_ring, er_ctxt->rp);
+
+	/* Only proceed if event ring has pending events */
+	if (ev_ring->rp == dev_rp)
+		return IRQ_HANDLED;
+
+	/* For client managed event ring, notify pending data */
+	if (mhi_event->cl_manage) {
+		struct mhi_chan *mhi_chan = mhi_event->mhi_chan;
+		struct mhi_device *mhi_dev = mhi_chan->mhi_dev;
+
+		if (mhi_dev)
+			mhi_notify(mhi_dev, MHI_CB_PENDING_DATA);
+	} else {
+		tasklet_schedule(&mhi_event->task);
+	}
+
+	return IRQ_HANDLED;
+}
+
+irqreturn_t mhi_intvec_threaded_handler(int irq_number, void *dev)
+{
+	struct mhi_controller *mhi_cntrl = dev;
+	enum mhi_state state = MHI_STATE_MAX;
+	enum mhi_pm_state pm_state = 0;
+	enum mhi_ee_type ee = 0;
+
+	write_lock_irq(&mhi_cntrl->pm_lock);
+	if (MHI_REG_ACCESS_VALID(mhi_cntrl->pm_state)) {
+		state = mhi_get_mhi_state(mhi_cntrl);
+		ee = mhi_cntrl->ee;
+		mhi_cntrl->ee = mhi_get_exec_env(mhi_cntrl);
+	}
+
+	if (state == MHI_STATE_SYS_ERR) {
+		dev_dbg(&mhi_cntrl->mhi_dev->dev, "System error detected\n");
+		pm_state = mhi_tryset_pm_state(mhi_cntrl,
+					       MHI_PM_SYS_ERR_DETECT);
+	}
+	write_unlock_irq(&mhi_cntrl->pm_lock);
+
+	/* If device in RDDM don't bother processing SYS error */
+	if (mhi_cntrl->ee == MHI_EE_RDDM) {
+		if (mhi_cntrl->ee != ee) {
+			mhi_cntrl->status_cb(mhi_cntrl, MHI_CB_EE_RDDM);
+			wake_up_all(&mhi_cntrl->state_event);
+		}
+		goto exit_intvec;
+	}
+
+	if (pm_state == MHI_PM_SYS_ERR_DETECT) {
+		wake_up_all(&mhi_cntrl->state_event);
+
+		/* For fatal errors, we let controller decide next step */
+		if (MHI_IN_PBL(ee))
+			mhi_cntrl->status_cb(mhi_cntrl, MHI_CB_FATAL_ERROR);
+		else
+			schedule_work(&mhi_cntrl->syserr_worker);
+	}
+
+exit_intvec:
+
+	return IRQ_HANDLED;
+}
+
+irqreturn_t mhi_intvec_handler(int irq_number, void *dev)
+{
+	struct mhi_controller *mhi_cntrl = dev;
+
+	/* Wake up events waiting for state change */
+	wake_up_all(&mhi_cntrl->state_event);
+
+	return IRQ_WAKE_THREAD;
+}
+
+static void mhi_recycle_ev_ring_element(struct mhi_controller *mhi_cntrl,
+					struct mhi_ring *ring)
+{
+	dma_addr_t ctxt_wp;
+
+	/* Update the WP */
+	ring->wp += ring->el_size;
+	ctxt_wp = *ring->ctxt_wp + ring->el_size;
+
+	if (ring->wp >= (ring->base + ring->len)) {
+		ring->wp = ring->base;
+		ctxt_wp = ring->iommu_base;
+	}
+
+	*ring->ctxt_wp = ctxt_wp;
+
+	/* Update the RP */
+	ring->rp += ring->el_size;
+	if (ring->rp >= (ring->base + ring->len))
+		ring->rp = ring->base;
+
+	/* Update to all cores */
+	smp_wmb();
+}
+
+static int parse_xfer_event(struct mhi_controller *mhi_cntrl,
+			    struct mhi_tre *event,
+			    struct mhi_chan *mhi_chan)
+{
+	struct mhi_ring *buf_ring, *tre_ring;
+	struct device *dev = &mhi_cntrl->mhi_dev->dev;
+	struct mhi_result result;
+	unsigned long flags = 0;
+	u32 ev_code;
+
+	ev_code = MHI_TRE_GET_EV_CODE(event);
+	buf_ring = &mhi_chan->buf_ring;
+	tre_ring = &mhi_chan->tre_ring;
+
+	result.transaction_status = (ev_code == MHI_EV_CC_OVERFLOW) ?
+		-EOVERFLOW : 0;
+
+	/*
+	 * If it's a DB Event then we need to grab the lock
+	 * with preemption disabled and as a write because we
+	 * have to update db register and there are chances that
+	 * another thread could be doing the same.
+	 */
+	if (ev_code >= MHI_EV_CC_OOB)
+		write_lock_irqsave(&mhi_chan->lock, flags);
+	else
+		read_lock_bh(&mhi_chan->lock);
+
+	if (mhi_chan->ch_state != MHI_CH_STATE_ENABLED)
+		goto end_process_tx_event;
+
+	switch (ev_code) {
+	case MHI_EV_CC_OVERFLOW:
+	case MHI_EV_CC_EOB:
+	case MHI_EV_CC_EOT:
+	{
+		dma_addr_t ptr = MHI_TRE_GET_EV_PTR(event);
+		struct mhi_tre *local_rp, *ev_tre;
+		void *dev_rp;
+		struct mhi_buf_info *buf_info;
+		u16 xfer_len;
+
+		/* Get the TRB this event points to */
+		ev_tre = mhi_to_virtual(tre_ring, ptr);
+
+		dev_rp = ev_tre + 1;
+		if (dev_rp >= (tre_ring->base + tre_ring->len))
+			dev_rp = tre_ring->base;
+
+		result.dir = mhi_chan->dir;
+
+		local_rp = tre_ring->rp;
+		while (local_rp != dev_rp) {
+			buf_info = buf_ring->rp;
+			/* If it's the last TRE, get length from the event */
+			if (local_rp == ev_tre)
+				xfer_len = MHI_TRE_GET_EV_LEN(event);
+			else
+				xfer_len = buf_info->len;
+
+			/* Unmap if it's not pre-mapped by client */
+			if (likely(!buf_info->pre_mapped))
+				mhi_cntrl->unmap_single(mhi_cntrl, buf_info);
+
+			result.buf_addr = buf_info->cb_buf;
+			result.bytes_xferd = xfer_len;
+			mhi_del_ring_element(mhi_cntrl, buf_ring);
+			mhi_del_ring_element(mhi_cntrl, tre_ring);
+			local_rp = tre_ring->rp;
+
+			/* notify client */
+			mhi_chan->xfer_cb(mhi_chan->mhi_dev, &result);
+
+			if (mhi_chan->dir == DMA_TO_DEVICE)
+				atomic_dec(&mhi_cntrl->pending_pkts);
+
+			/*
+			 * Recycle the buffer if buffer is pre-allocated,
+			 * if there is an error, not much we can do apart
+			 * from dropping the packet
+			 */
+			if (mhi_chan->pre_alloc) {
+				if (mhi_queue_buf(mhi_chan->mhi_dev,
+						  mhi_chan->dir,
+						  buf_info->cb_buf,
+						  buf_info->len, MHI_EOT)) {
+					dev_err(dev,
+						"Error recycling buffer for chan:%d\n",
+						mhi_chan->chan);
+					kfree(buf_info->cb_buf);
+				}
+			}
+		}
+		break;
+	} /* CC_EOT */
+	case MHI_EV_CC_OOB:
+	case MHI_EV_CC_DB_MODE:
+	{
+		unsigned long flags;
+
+		mhi_chan->db_cfg.db_mode = 1;
+		read_lock_irqsave(&mhi_cntrl->pm_lock, flags);
+		if (tre_ring->wp != tre_ring->rp &&
+		    MHI_DB_ACCESS_VALID(mhi_cntrl)) {
+			mhi_ring_chan_db(mhi_cntrl, mhi_chan);
+		}
+		read_unlock_irqrestore(&mhi_cntrl->pm_lock, flags);
+		break;
+	}
+	case MHI_EV_CC_BAD_TRE:
+	default:
+		dev_err(dev, "Unknown event 0x%x\n", ev_code);
+		break;
+	} /* switch(MHI_EV_READ_CODE(EV_TRB_CODE,event)) */
+
+end_process_tx_event:
+	if (ev_code >= MHI_EV_CC_OOB)
+		write_unlock_irqrestore(&mhi_chan->lock, flags);
+	else
+		read_unlock_bh(&mhi_chan->lock);
+
+	return 0;
+}
+
+static int parse_rsc_event(struct mhi_controller *mhi_cntrl,
+			   struct mhi_tre *event,
+			   struct mhi_chan *mhi_chan)
+{
+	struct mhi_ring *buf_ring, *tre_ring;
+	struct mhi_buf_info *buf_info;
+	struct mhi_result result;
+	int ev_code;
+	u32 cookie; /* offset to local descriptor */
+	u16 xfer_len;
+
+	buf_ring = &mhi_chan->buf_ring;
+	tre_ring = &mhi_chan->tre_ring;
+
+	ev_code = MHI_TRE_GET_EV_CODE(event);
+	cookie = MHI_TRE_GET_EV_COOKIE(event);
+	xfer_len = MHI_TRE_GET_EV_LEN(event);
+
+	/* Received out of bound cookie */
+	WARN_ON(cookie >= buf_ring->len);
+
+	buf_info = buf_ring->base + cookie;
+
+	result.transaction_status = (ev_code == MHI_EV_CC_OVERFLOW) ?
+		-EOVERFLOW : 0;
+	result.bytes_xferd = xfer_len;
+	result.buf_addr = buf_info->cb_buf;
+	result.dir = mhi_chan->dir;
+
+	read_lock_bh(&mhi_chan->lock);
+
+	if (mhi_chan->ch_state != MHI_CH_STATE_ENABLED)
+		goto end_process_rsc_event;
+
+	WARN_ON(!buf_info->used);
+
+	/* notify the client */
+	mhi_chan->xfer_cb(mhi_chan->mhi_dev, &result);
+
+	/*
+	 * Note: We're arbitrarily incrementing RP even though, completion
+	 * packet we processed might not be the same one, reason we can do this
+	 * is because device guaranteed to cache descriptors in order it
+	 * receive, so even though completion event is different we can re-use
+	 * all descriptors in between.
+	 * Example:
+	 * Transfer Ring has descriptors: A, B, C, D
+	 * Last descriptor host queue is D (WP) and first descriptor
+	 * host queue is A (RP).
+	 * The completion event we just serviced is descriptor C.
+	 * Then we can safely queue descriptors to replace A, B, and C
+	 * even though host did not receive any completions.
+	 */
+	mhi_del_ring_element(mhi_cntrl, tre_ring);
+	buf_info->used = false;
+
+end_process_rsc_event:
+	read_unlock_bh(&mhi_chan->lock);
+
+	return 0;
+}
+
+static void mhi_process_cmd_completion(struct mhi_controller *mhi_cntrl,
+				       struct mhi_tre *tre)
+{
+	dma_addr_t ptr = MHI_TRE_GET_EV_PTR(tre);
+	struct mhi_cmd *cmd_ring = &mhi_cntrl->mhi_cmd[PRIMARY_CMD_RING];
+	struct mhi_ring *mhi_ring = &cmd_ring->ring;
+	struct mhi_tre *cmd_pkt;
+	struct mhi_chan *mhi_chan;
+	u32 chan;
+
+	cmd_pkt = mhi_to_virtual(mhi_ring, ptr);
+
+	chan = MHI_TRE_GET_CMD_CHID(cmd_pkt);
+	mhi_chan = &mhi_cntrl->mhi_chan[chan];
+	write_lock_bh(&mhi_chan->lock);
+	mhi_chan->ccs = MHI_TRE_GET_EV_CODE(tre);
+	complete(&mhi_chan->completion);
+	write_unlock_bh(&mhi_chan->lock);
+
+	mhi_del_ring_element(mhi_cntrl, mhi_ring);
+}
+
+int mhi_process_ctrl_ev_ring(struct mhi_controller *mhi_cntrl,
+			     struct mhi_event *mhi_event,
+			     u32 event_quota)
+{
+	struct mhi_tre *dev_rp, *local_rp;
+	struct mhi_ring *ev_ring = &mhi_event->ring;
+	struct mhi_event_ctxt *er_ctxt =
+		&mhi_cntrl->mhi_ctxt->er_ctxt[mhi_event->er_index];
+	struct mhi_chan *mhi_chan;
+	struct device *dev = &mhi_cntrl->mhi_dev->dev;
+	u32 chan;
+	int count = 0;
+
+	/*
+	 * This is a quick check to avoid unnecessary event processing
+	 * in case MHI is already in error state, but it's still possible
+	 * to transition to error state while processing events
+	 */
+	if (unlikely(MHI_EVENT_ACCESS_INVALID(mhi_cntrl->pm_state)))
+		return -EIO;
+
+	dev_rp = mhi_to_virtual(ev_ring, er_ctxt->rp);
+	local_rp = ev_ring->rp;
+
+	while (dev_rp != local_rp) {
+		enum mhi_pkt_type type = MHI_TRE_GET_EV_TYPE(local_rp);
+
+		switch (type) {
+		case MHI_PKT_TYPE_BW_REQ_EVENT:
+		{
+			struct mhi_link_info *link_info;
+
+			link_info = &mhi_cntrl->mhi_link_info;
+			write_lock_irq(&mhi_cntrl->pm_lock);
+			link_info->target_link_speed =
+				MHI_TRE_GET_EV_LINKSPEED(local_rp);
+			link_info->target_link_width =
+				MHI_TRE_GET_EV_LINKWIDTH(local_rp);
+			write_unlock_irq(&mhi_cntrl->pm_lock);
+			dev_dbg(dev, "Received BW_REQ event\n");
+			mhi_cntrl->status_cb(mhi_cntrl, MHI_CB_BW_REQ);
+			break;
+		}
+		case MHI_PKT_TYPE_STATE_CHANGE_EVENT:
+		{
+			enum mhi_state new_state;
+
+			new_state = MHI_TRE_GET_EV_STATE(local_rp);
+
+			dev_dbg(dev, "State change event to state: %s\n",
+				TO_MHI_STATE_STR(new_state));
+
+			switch (new_state) {
+			case MHI_STATE_M0:
+				mhi_pm_m0_transition(mhi_cntrl);
+				break;
+			case MHI_STATE_M1:
+				mhi_pm_m1_transition(mhi_cntrl);
+				break;
+			case MHI_STATE_M3:
+				mhi_pm_m3_transition(mhi_cntrl);
+				break;
+			case MHI_STATE_SYS_ERR:
+			{
+				enum mhi_pm_state new_state;
+
+				dev_dbg(dev, "System error detected\n");
+				write_lock_irq(&mhi_cntrl->pm_lock);
+				new_state = mhi_tryset_pm_state(mhi_cntrl,
+							MHI_PM_SYS_ERR_DETECT);
+				write_unlock_irq(&mhi_cntrl->pm_lock);
+				if (new_state == MHI_PM_SYS_ERR_DETECT)
+					schedule_work(&mhi_cntrl->syserr_worker);
+				break;
+			}
+			default:
+				dev_err(dev, "Invalid state: %s\n",
+					TO_MHI_STATE_STR(new_state));
+			}
+
+			break;
+		}
+		case MHI_PKT_TYPE_CMD_COMPLETION_EVENT:
+			mhi_process_cmd_completion(mhi_cntrl, local_rp);
+			break;
+		case MHI_PKT_TYPE_EE_EVENT:
+		{
+			enum dev_st_transition st = DEV_ST_TRANSITION_MAX;
+			enum mhi_ee_type event = MHI_TRE_GET_EV_EXECENV(local_rp);
+
+			dev_dbg(dev, "Received EE event: %s\n",
+				TO_MHI_EXEC_STR(event));
+			switch (event) {
+			case MHI_EE_SBL:
+				st = DEV_ST_TRANSITION_SBL;
+				break;
+			case MHI_EE_WFW:
+			case MHI_EE_AMSS:
+				st = DEV_ST_TRANSITION_MISSION_MODE;
+				break;
+			case MHI_EE_RDDM:
+				mhi_cntrl->status_cb(mhi_cntrl, MHI_CB_EE_RDDM);
+				write_lock_irq(&mhi_cntrl->pm_lock);
+				mhi_cntrl->ee = event;
+				write_unlock_irq(&mhi_cntrl->pm_lock);
+				wake_up_all(&mhi_cntrl->state_event);
+				break;
+			default:
+				dev_err(dev,
+					"Unhandled EE event: 0x%x\n", type);
+			}
+			if (st != DEV_ST_TRANSITION_MAX)
+				mhi_queue_state_transition(mhi_cntrl, st);
+
+			break;
+		}
+		case MHI_PKT_TYPE_TX_EVENT:
+			chan = MHI_TRE_GET_EV_CHID(local_rp);
+			mhi_chan = &mhi_cntrl->mhi_chan[chan];
+			parse_xfer_event(mhi_cntrl, local_rp, mhi_chan);
+			event_quota--;
+			break;
+		default:
+			dev_err(dev, "Unhandled event type: %d\n", type);
+			break;
+		}
+
+		mhi_recycle_ev_ring_element(mhi_cntrl, ev_ring);
+		local_rp = ev_ring->rp;
+		dev_rp = mhi_to_virtual(ev_ring, er_ctxt->rp);
+		count++;
+	}
+
+	read_lock_bh(&mhi_cntrl->pm_lock);
+	if (likely(MHI_DB_ACCESS_VALID(mhi_cntrl)))
+		mhi_ring_er_db(mhi_event);
+	read_unlock_bh(&mhi_cntrl->pm_lock);
+
+	return count;
+}
+
+int mhi_process_data_event_ring(struct mhi_controller *mhi_cntrl,
+				struct mhi_event *mhi_event,
+				u32 event_quota)
+{
+	struct mhi_tre *dev_rp, *local_rp;
+	struct mhi_ring *ev_ring = &mhi_event->ring;
+	struct mhi_event_ctxt *er_ctxt =
+		&mhi_cntrl->mhi_ctxt->er_ctxt[mhi_event->er_index];
+	int count = 0;
+	u32 chan;
+	struct mhi_chan *mhi_chan;
+
+	if (unlikely(MHI_EVENT_ACCESS_INVALID(mhi_cntrl->pm_state)))
+		return -EIO;
+
+	dev_rp = mhi_to_virtual(ev_ring, er_ctxt->rp);
+	local_rp = ev_ring->rp;
+
+	while (dev_rp != local_rp && event_quota > 0) {
+		enum mhi_pkt_type type = MHI_TRE_GET_EV_TYPE(local_rp);
+
+		chan = MHI_TRE_GET_EV_CHID(local_rp);
+		mhi_chan = &mhi_cntrl->mhi_chan[chan];
+
+		if (likely(type == MHI_PKT_TYPE_TX_EVENT)) {
+			parse_xfer_event(mhi_cntrl, local_rp, mhi_chan);
+			event_quota--;
+		} else if (type == MHI_PKT_TYPE_RSC_TX_EVENT) {
+			parse_rsc_event(mhi_cntrl, local_rp, mhi_chan);
+			event_quota--;
+		}
+
+		mhi_recycle_ev_ring_element(mhi_cntrl, ev_ring);
+		local_rp = ev_ring->rp;
+		dev_rp = mhi_to_virtual(ev_ring, er_ctxt->rp);
+		count++;
+	}
+	read_lock_bh(&mhi_cntrl->pm_lock);
+	if (likely(MHI_DB_ACCESS_VALID(mhi_cntrl)))
+		mhi_ring_er_db(mhi_event);
+	read_unlock_bh(&mhi_cntrl->pm_lock);
+
+	return count;
+}
+
+void mhi_ev_task(unsigned long data)
+{
+	struct mhi_event *mhi_event = (struct mhi_event *)data;
+	struct mhi_controller *mhi_cntrl = mhi_event->mhi_cntrl;
+
+	/* process all pending events */
+	spin_lock_bh(&mhi_event->lock);
+	mhi_event->process_event(mhi_cntrl, mhi_event, U32_MAX);
+	spin_unlock_bh(&mhi_event->lock);
+}
+
+void mhi_ctrl_ev_task(unsigned long data)
+{
+	struct mhi_event *mhi_event = (struct mhi_event *)data;
+	struct mhi_controller *mhi_cntrl = mhi_event->mhi_cntrl;
+	struct device *dev = &mhi_cntrl->mhi_dev->dev;
+	enum mhi_state state;
+	enum mhi_pm_state pm_state = 0;
+	int ret;
+
+	/*
+	 * We can check PM state w/o a lock here because there is no way
+	 * PM state can change from reg access valid to no access while this
+	 * thread being executed.
+	 */
+	if (!MHI_REG_ACCESS_VALID(mhi_cntrl->pm_state)) {
+		/*
+		 * We may have a pending event but not allowed to
+		 * process it since we are probably in a suspended state,
+		 * so trigger a resume.
+		 */
+		mhi_cntrl->runtime_get(mhi_cntrl);
+		mhi_cntrl->runtime_put(mhi_cntrl);
+
+		return;
+	}
+
+	/* Process ctrl events events */
+	ret = mhi_event->process_event(mhi_cntrl, mhi_event, U32_MAX);
+
+	/*
+	 * We received an IRQ but no events to process, maybe device went to
+	 * SYS_ERR state? Check the state to confirm.
+	 */
+	if (!ret) {
+		write_lock_irq(&mhi_cntrl->pm_lock);
+		state = mhi_get_mhi_state(mhi_cntrl);
+		if (state == MHI_STATE_SYS_ERR) {
+			dev_dbg(dev, "System error detected\n");
+			pm_state = mhi_tryset_pm_state(mhi_cntrl,
+						       MHI_PM_SYS_ERR_DETECT);
+		}
+		write_unlock_irq(&mhi_cntrl->pm_lock);
+		if (pm_state == MHI_PM_SYS_ERR_DETECT)
+			schedule_work(&mhi_cntrl->syserr_worker);
+	}
+}
+
+static bool mhi_is_ring_full(struct mhi_controller *mhi_cntrl,
+			     struct mhi_ring *ring)
+{
+	void *tmp = ring->wp + ring->el_size;
+
+	if (tmp >= (ring->base + ring->len))
+		tmp = ring->base;
+
+	return (tmp == ring->rp);
+}
+
+int mhi_queue_skb(struct mhi_device *mhi_dev, enum dma_data_direction dir,
+		  struct sk_buff *skb, size_t len, enum mhi_flags mflags)
+{
+	struct mhi_controller *mhi_cntrl = mhi_dev->mhi_cntrl;
+	struct mhi_chan *mhi_chan = (dir == DMA_TO_DEVICE) ? mhi_dev->ul_chan :
+							     mhi_dev->dl_chan;
+	struct mhi_ring *tre_ring = &mhi_chan->tre_ring;
+	struct mhi_ring *buf_ring = &mhi_chan->buf_ring;
+	struct mhi_buf_info *buf_info;
+	struct mhi_tre *mhi_tre;
+	int ret;
+
+	/* If MHI host pre-allocates buffers then client drivers cannot queue */
+	if (mhi_chan->pre_alloc)
+		return -EINVAL;
+
+	if (mhi_is_ring_full(mhi_cntrl, tre_ring))
+		return -ENOMEM;
+
+	read_lock_bh(&mhi_cntrl->pm_lock);
+	if (unlikely(MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state))) {
+		read_unlock_bh(&mhi_cntrl->pm_lock);
+		return -EIO;
+	}
+
+	/* we're in M3 or transitioning to M3 */
+	if (MHI_PM_IN_SUSPEND_STATE(mhi_cntrl->pm_state)) {
+		mhi_cntrl->runtime_get(mhi_cntrl);
+		mhi_cntrl->runtime_put(mhi_cntrl);
+	}
+
+	/* Toggle wake to exit out of M2 */
+	mhi_cntrl->wake_toggle(mhi_cntrl);
+
+	/* Generate the TRE */
+	buf_info = buf_ring->wp;
+
+	buf_info->v_addr = skb->data;
+	buf_info->cb_buf = skb;
+	buf_info->wp = tre_ring->wp;
+	buf_info->dir = mhi_chan->dir;
+	buf_info->len = len;
+	ret = mhi_cntrl->map_single(mhi_cntrl, buf_info);
+	if (ret)
+		goto map_error;
+
+	mhi_tre = tre_ring->wp;
+
+	mhi_tre->ptr = MHI_TRE_DATA_PTR(buf_info->p_addr);
+	mhi_tre->dword[0] = MHI_TRE_DATA_DWORD0(buf_info->len);
+	mhi_tre->dword[1] = MHI_TRE_DATA_DWORD1(1, 1, 0, 0);
+
+	/* increment WP */
+	mhi_add_ring_element(mhi_cntrl, tre_ring);
+	mhi_add_ring_element(mhi_cntrl, buf_ring);
+
+	if (mhi_chan->dir == DMA_TO_DEVICE)
+		atomic_inc(&mhi_cntrl->pending_pkts);
+
+	if (likely(MHI_DB_ACCESS_VALID(mhi_cntrl))) {
+		read_lock_bh(&mhi_chan->lock);
+		mhi_ring_chan_db(mhi_cntrl, mhi_chan);
+		read_unlock_bh(&mhi_chan->lock);
+	}
+
+	read_unlock_bh(&mhi_cntrl->pm_lock);
+
+	return 0;
+
+map_error:
+	read_unlock_bh(&mhi_cntrl->pm_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(mhi_queue_skb);
+
+int mhi_queue_dma(struct mhi_device *mhi_dev, enum dma_data_direction dir,
+		  struct mhi_buf *mhi_buf, size_t len, enum mhi_flags mflags)
+{
+	struct mhi_controller *mhi_cntrl = mhi_dev->mhi_cntrl;
+	struct mhi_chan *mhi_chan = (dir == DMA_TO_DEVICE) ? mhi_dev->ul_chan :
+							     mhi_dev->dl_chan;
+	struct device *dev = &mhi_cntrl->mhi_dev->dev;
+	struct mhi_ring *tre_ring = &mhi_chan->tre_ring;
+	struct mhi_ring *buf_ring = &mhi_chan->buf_ring;
+	struct mhi_buf_info *buf_info;
+	struct mhi_tre *mhi_tre;
+
+	/* If MHI host pre-allocates buffers then client drivers cannot queue */
+	if (mhi_chan->pre_alloc)
+		return -EINVAL;
+
+	if (mhi_is_ring_full(mhi_cntrl, tre_ring))
+		return -ENOMEM;
+
+	read_lock_bh(&mhi_cntrl->pm_lock);
+	if (unlikely(MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state))) {
+		dev_err(dev, "MHI is not in activate state, PM state: %s\n",
+			to_mhi_pm_state_str(mhi_cntrl->pm_state));
+		read_unlock_bh(&mhi_cntrl->pm_lock);
+
+		return -EIO;
+	}
+
+	/* we're in M3 or transitioning to M3 */
+	if (MHI_PM_IN_SUSPEND_STATE(mhi_cntrl->pm_state)) {
+		mhi_cntrl->runtime_get(mhi_cntrl);
+		mhi_cntrl->runtime_put(mhi_cntrl);
+	}
+
+	/* Toggle wake to exit out of M2 */
+	mhi_cntrl->wake_toggle(mhi_cntrl);
+
+	/* Generate the TRE */
+	buf_info = buf_ring->wp;
+	WARN_ON(buf_info->used);
+	buf_info->p_addr = mhi_buf->dma_addr;
+	buf_info->pre_mapped = true;
+	buf_info->cb_buf = mhi_buf;
+	buf_info->wp = tre_ring->wp;
+	buf_info->dir = mhi_chan->dir;
+	buf_info->len = len;
+
+	mhi_tre = tre_ring->wp;
+
+	mhi_tre->ptr = MHI_TRE_DATA_PTR(buf_info->p_addr);
+	mhi_tre->dword[0] = MHI_TRE_DATA_DWORD0(buf_info->len);
+	mhi_tre->dword[1] = MHI_TRE_DATA_DWORD1(1, 1, 0, 0);
+
+	/* increment WP */
+	mhi_add_ring_element(mhi_cntrl, tre_ring);
+	mhi_add_ring_element(mhi_cntrl, buf_ring);
+
+	if (mhi_chan->dir == DMA_TO_DEVICE)
+		atomic_inc(&mhi_cntrl->pending_pkts);
+
+	if (likely(MHI_DB_ACCESS_VALID(mhi_cntrl))) {
+		read_lock_bh(&mhi_chan->lock);
+		mhi_ring_chan_db(mhi_cntrl, mhi_chan);
+		read_unlock_bh(&mhi_chan->lock);
+	}
+
+	read_unlock_bh(&mhi_cntrl->pm_lock);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(mhi_queue_dma);
+
+int mhi_gen_tre(struct mhi_controller *mhi_cntrl, struct mhi_chan *mhi_chan,
+		void *buf, void *cb, size_t buf_len, enum mhi_flags flags)
+{
+	struct mhi_ring *buf_ring, *tre_ring;
+	struct mhi_tre *mhi_tre;
+	struct mhi_buf_info *buf_info;
+	int eot, eob, chain, bei;
+	int ret;
+
+	buf_ring = &mhi_chan->buf_ring;
+	tre_ring = &mhi_chan->tre_ring;
+
+	buf_info = buf_ring->wp;
+	buf_info->v_addr = buf;
+	buf_info->cb_buf = cb;
+	buf_info->wp = tre_ring->wp;
+	buf_info->dir = mhi_chan->dir;
+	buf_info->len = buf_len;
+
+	ret = mhi_cntrl->map_single(mhi_cntrl, buf_info);
+	if (ret)
+		return ret;
+
+	eob = !!(flags & MHI_EOB);
+	eot = !!(flags & MHI_EOT);
+	chain = !!(flags & MHI_CHAIN);
+	bei = !!(mhi_chan->intmod);
+
+	mhi_tre = tre_ring->wp;
+	mhi_tre->ptr = MHI_TRE_DATA_PTR(buf_info->p_addr);
+	mhi_tre->dword[0] = MHI_TRE_DATA_DWORD0(buf_len);
+	mhi_tre->dword[1] = MHI_TRE_DATA_DWORD1(bei, eot, eob, chain);
+
+	/* increment WP */
+	mhi_add_ring_element(mhi_cntrl, tre_ring);
+	mhi_add_ring_element(mhi_cntrl, buf_ring);
+
+	return 0;
+}
+
+int mhi_queue_buf(struct mhi_device *mhi_dev, enum dma_data_direction dir,
+		  void *buf, size_t len, enum mhi_flags mflags)
+{
+	struct mhi_controller *mhi_cntrl = mhi_dev->mhi_cntrl;
+	struct mhi_chan *mhi_chan = (dir == DMA_TO_DEVICE) ? mhi_dev->ul_chan :
+							     mhi_dev->dl_chan;
+	struct mhi_ring *tre_ring;
+	unsigned long flags;
+	int ret;
+
+	/*
+	 * this check here only as a guard, it's always
+	 * possible mhi can enter error while executing rest of function,
+	 * which is not fatal so we do not need to hold pm_lock
+	 */
+	if (unlikely(MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state)))
+		return -EIO;
+
+	tre_ring = &mhi_chan->tre_ring;
+	if (mhi_is_ring_full(mhi_cntrl, tre_ring))
+		return -ENOMEM;
+
+	ret = mhi_gen_tre(mhi_cntrl, mhi_chan, buf, buf, len, mflags);
+	if (unlikely(ret))
+		return ret;
+
+	read_lock_irqsave(&mhi_cntrl->pm_lock, flags);
+
+	/* we're in M3 or transitioning to M3 */
+	if (MHI_PM_IN_SUSPEND_STATE(mhi_cntrl->pm_state)) {
+		mhi_cntrl->runtime_get(mhi_cntrl);
+		mhi_cntrl->runtime_put(mhi_cntrl);
+	}
+
+	/* Toggle wake to exit out of M2 */
+	mhi_cntrl->wake_toggle(mhi_cntrl);
+
+	if (mhi_chan->dir == DMA_TO_DEVICE)
+		atomic_inc(&mhi_cntrl->pending_pkts);
+
+	if (likely(MHI_DB_ACCESS_VALID(mhi_cntrl))) {
+		unsigned long flags;
+
+		read_lock_irqsave(&mhi_chan->lock, flags);
+		mhi_ring_chan_db(mhi_cntrl, mhi_chan);
+		read_unlock_irqrestore(&mhi_chan->lock, flags);
+	}
+
+	read_unlock_irqrestore(&mhi_cntrl->pm_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(mhi_queue_buf);
+
+int mhi_send_cmd(struct mhi_controller *mhi_cntrl,
+		 struct mhi_chan *mhi_chan,
+		 enum mhi_cmd_type cmd)
+{
+	struct mhi_tre *cmd_tre = NULL;
+	struct mhi_cmd *mhi_cmd = &mhi_cntrl->mhi_cmd[PRIMARY_CMD_RING];
+	struct mhi_ring *ring = &mhi_cmd->ring;
+	struct device *dev = &mhi_cntrl->mhi_dev->dev;
+	int chan = 0;
+
+	if (mhi_chan)
+		chan = mhi_chan->chan;
+
+	spin_lock_bh(&mhi_cmd->lock);
+	if (!get_nr_avail_ring_elements(mhi_cntrl, ring)) {
+		spin_unlock_bh(&mhi_cmd->lock);
+		return -ENOMEM;
+	}
+
+	/* prepare the cmd tre */
+	cmd_tre = ring->wp;
+	switch (cmd) {
+	case MHI_CMD_RESET_CHAN:
+		cmd_tre->ptr = MHI_TRE_CMD_RESET_PTR;
+		cmd_tre->dword[0] = MHI_TRE_CMD_RESET_DWORD0;
+		cmd_tre->dword[1] = MHI_TRE_CMD_RESET_DWORD1(chan);
+		break;
+	case MHI_CMD_START_CHAN:
+		cmd_tre->ptr = MHI_TRE_CMD_START_PTR;
+		cmd_tre->dword[0] = MHI_TRE_CMD_START_DWORD0;
+		cmd_tre->dword[1] = MHI_TRE_CMD_START_DWORD1(chan);
+		break;
+	default:
+		dev_err(dev, "Command not supported\n");
+		break;
+	}
+
+	/* queue to hardware */
+	mhi_add_ring_element(mhi_cntrl, ring);
+	read_lock_bh(&mhi_cntrl->pm_lock);
+	if (likely(MHI_DB_ACCESS_VALID(mhi_cntrl)))
+		mhi_ring_cmd_db(mhi_cntrl, mhi_cmd);
+	read_unlock_bh(&mhi_cntrl->pm_lock);
+	spin_unlock_bh(&mhi_cmd->lock);
+
+	return 0;
+}
+
+static void __mhi_unprepare_channel(struct mhi_controller *mhi_cntrl,
+				    struct mhi_chan *mhi_chan)
+{
+	int ret;
+	struct device *dev = &mhi_cntrl->mhi_dev->dev;
+
+	dev_dbg(dev, "Entered: unprepare channel:%d\n", mhi_chan->chan);
+
+	/* no more processing events for this channel */
+	mutex_lock(&mhi_chan->mutex);
+	write_lock_irq(&mhi_chan->lock);
+	if (mhi_chan->ch_state != MHI_CH_STATE_ENABLED) {
+		write_unlock_irq(&mhi_chan->lock);
+		mutex_unlock(&mhi_chan->mutex);
+		return;
+	}
+
+	mhi_chan->ch_state = MHI_CH_STATE_DISABLED;
+	write_unlock_irq(&mhi_chan->lock);
+
+	reinit_completion(&mhi_chan->completion);
+	read_lock_bh(&mhi_cntrl->pm_lock);
+	if (MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state)) {
+		read_unlock_bh(&mhi_cntrl->pm_lock);
+		goto error_invalid_state;
+	}
+
+	mhi_cntrl->wake_toggle(mhi_cntrl);
+	read_unlock_bh(&mhi_cntrl->pm_lock);
+
+	mhi_cntrl->runtime_get(mhi_cntrl);
+	mhi_cntrl->runtime_put(mhi_cntrl);
+	ret = mhi_send_cmd(mhi_cntrl, mhi_chan, MHI_CMD_RESET_CHAN);
+	if (ret)
+		goto error_invalid_state;
+
+	/* even if it fails we will still reset */
+	ret = wait_for_completion_timeout(&mhi_chan->completion,
+				msecs_to_jiffies(mhi_cntrl->timeout_ms));
+	if (!ret || mhi_chan->ccs != MHI_EV_CC_SUCCESS)
+		dev_err(dev,
+			"Failed to receive cmd completion, still resetting\n");
+
+error_invalid_state:
+	if (!mhi_chan->offload_ch) {
+		mhi_reset_chan(mhi_cntrl, mhi_chan);
+		mhi_deinit_chan_ctxt(mhi_cntrl, mhi_chan);
+	}
+	dev_dbg(dev, "chan:%d successfully resetted\n", mhi_chan->chan);
+	mutex_unlock(&mhi_chan->mutex);
+}
+
+int mhi_prepare_channel(struct mhi_controller *mhi_cntrl,
+			struct mhi_chan *mhi_chan)
+{
+	int ret = 0;
+	struct device *dev = &mhi_cntrl->mhi_dev->dev;
+
+	dev_dbg(dev, "Preparing channel: %d\n", mhi_chan->chan);
+
+	if (!(BIT(mhi_cntrl->ee) & mhi_chan->ee_mask)) {
+		dev_err(dev,
+			"Current EE: %s Required EE Mask: 0x%x for chan: %s\n",
+			TO_MHI_EXEC_STR(mhi_cntrl->ee), mhi_chan->ee_mask,
+			mhi_chan->name);
+		return -ENOTCONN;
+	}
+
+	mutex_lock(&mhi_chan->mutex);
+
+	/* If channel is not in disable state, do not allow it to start */
+	if (mhi_chan->ch_state != MHI_CH_STATE_DISABLED) {
+		ret = -EIO;
+		dev_dbg(dev, "channel: %d is not in disabled state\n",
+			mhi_chan->chan);
+		goto error_init_chan;
+	}
+
+	/* Check of client manages channel context for offload channels */
+	if (!mhi_chan->offload_ch) {
+		ret = mhi_init_chan_ctxt(mhi_cntrl, mhi_chan);
+		if (ret)
+			goto error_init_chan;
+	}
+
+	reinit_completion(&mhi_chan->completion);
+	read_lock_bh(&mhi_cntrl->pm_lock);
+	if (MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state)) {
+		read_unlock_bh(&mhi_cntrl->pm_lock);
+		ret = -EIO;
+		goto error_pm_state;
+	}
+
+	mhi_cntrl->wake_toggle(mhi_cntrl);
+	read_unlock_bh(&mhi_cntrl->pm_lock);
+	mhi_cntrl->runtime_get(mhi_cntrl);
+	mhi_cntrl->runtime_put(mhi_cntrl);
+
+	ret = mhi_send_cmd(mhi_cntrl, mhi_chan, MHI_CMD_START_CHAN);
+	if (ret)
+		goto error_pm_state;
+
+	ret = wait_for_completion_timeout(&mhi_chan->completion,
+				msecs_to_jiffies(mhi_cntrl->timeout_ms));
+	if (!ret || mhi_chan->ccs != MHI_EV_CC_SUCCESS) {
+		ret = -EIO;
+		goto error_pm_state;
+	}
+
+	write_lock_irq(&mhi_chan->lock);
+	mhi_chan->ch_state = MHI_CH_STATE_ENABLED;
+	write_unlock_irq(&mhi_chan->lock);
+
+	/* Pre-allocate buffer for xfer ring */
+	if (mhi_chan->pre_alloc) {
+		int nr_el = get_nr_avail_ring_elements(mhi_cntrl,
+						       &mhi_chan->tre_ring);
+		size_t len = mhi_cntrl->buffer_len;
+
+		while (nr_el--) {
+			void *buf;
+
+			buf = kmalloc(len, GFP_KERNEL);
+			if (!buf) {
+				ret = -ENOMEM;
+				goto error_pre_alloc;
+			}
+
+			/* Prepare transfer descriptors */
+			ret = mhi_gen_tre(mhi_cntrl, mhi_chan, buf, buf,
+					  len, MHI_EOT);
+			if (ret) {
+				kfree(buf);
+				goto error_pre_alloc;
+			}
+		}
+
+		read_lock_bh(&mhi_cntrl->pm_lock);
+		if (MHI_DB_ACCESS_VALID(mhi_cntrl)) {
+			read_lock_irq(&mhi_chan->lock);
+			mhi_ring_chan_db(mhi_cntrl, mhi_chan);
+			read_unlock_irq(&mhi_chan->lock);
+		}
+		read_unlock_bh(&mhi_cntrl->pm_lock);
+	}
+
+	mutex_unlock(&mhi_chan->mutex);
+
+	dev_dbg(dev, "Chan: %d successfully moved to start state\n",
+		mhi_chan->chan);
+
+	return 0;
+
+error_pm_state:
+	if (!mhi_chan->offload_ch)
+		mhi_deinit_chan_ctxt(mhi_cntrl, mhi_chan);
+
+error_init_chan:
+	mutex_unlock(&mhi_chan->mutex);
+
+	return ret;
+
+error_pre_alloc:
+	mutex_unlock(&mhi_chan->mutex);
+	__mhi_unprepare_channel(mhi_cntrl, mhi_chan);
+
+	return ret;
+}
+
+static void mhi_mark_stale_events(struct mhi_controller *mhi_cntrl,
+				  struct mhi_event *mhi_event,
+				  struct mhi_event_ctxt *er_ctxt,
+				  int chan)
+
+{
+	struct mhi_tre *dev_rp, *local_rp;
+	struct mhi_ring *ev_ring;
+	struct device *dev = &mhi_cntrl->mhi_dev->dev;
+	unsigned long flags;
+
+	dev_dbg(dev, "Marking all events for chan: %d as stale\n", chan);
+
+	ev_ring = &mhi_event->ring;
+
+	/* mark all stale events related to channel as STALE event */
+	spin_lock_irqsave(&mhi_event->lock, flags);
+	dev_rp = mhi_to_virtual(ev_ring, er_ctxt->rp);
+
+	local_rp = ev_ring->rp;
+	while (dev_rp != local_rp) {
+		if (MHI_TRE_GET_EV_TYPE(local_rp) == MHI_PKT_TYPE_TX_EVENT &&
+		    chan == MHI_TRE_GET_EV_CHID(local_rp))
+			local_rp->dword[1] = MHI_TRE_EV_DWORD1(chan,
+					MHI_PKT_TYPE_STALE_EVENT);
+		local_rp++;
+		if (local_rp == (ev_ring->base + ev_ring->len))
+			local_rp = ev_ring->base;
+	}
+
+	dev_dbg(dev, "Finished marking events as stale events\n");
+	spin_unlock_irqrestore(&mhi_event->lock, flags);
+}
+
+static void mhi_reset_data_chan(struct mhi_controller *mhi_cntrl,
+				struct mhi_chan *mhi_chan)
+{
+	struct mhi_ring *buf_ring, *tre_ring;
+	struct mhi_result result;
+
+	/* Reset any pending buffers */
+	buf_ring = &mhi_chan->buf_ring;
+	tre_ring = &mhi_chan->tre_ring;
+	result.transaction_status = -ENOTCONN;
+	result.bytes_xferd = 0;
+	while (tre_ring->rp != tre_ring->wp) {
+		struct mhi_buf_info *buf_info = buf_ring->rp;
+
+		if (mhi_chan->dir == DMA_TO_DEVICE)
+			atomic_dec(&mhi_cntrl->pending_pkts);
+
+		if (!buf_info->pre_mapped)
+			mhi_cntrl->unmap_single(mhi_cntrl, buf_info);
+
+		mhi_del_ring_element(mhi_cntrl, buf_ring);
+		mhi_del_ring_element(mhi_cntrl, tre_ring);
+
+		if (mhi_chan->pre_alloc) {
+			kfree(buf_info->cb_buf);
+		} else {
+			result.buf_addr = buf_info->cb_buf;
+			mhi_chan->xfer_cb(mhi_chan->mhi_dev, &result);
+		}
+	}
+}
+
+void mhi_reset_chan(struct mhi_controller *mhi_cntrl, struct mhi_chan *mhi_chan)
+{
+	struct mhi_event *mhi_event;
+	struct mhi_event_ctxt *er_ctxt;
+	int chan = mhi_chan->chan;
+
+	/* Nothing to reset, client doesn't queue buffers */
+	if (mhi_chan->offload_ch)
+		return;
+
+	read_lock_bh(&mhi_cntrl->pm_lock);
+	mhi_event = &mhi_cntrl->mhi_event[mhi_chan->er_index];
+	er_ctxt = &mhi_cntrl->mhi_ctxt->er_ctxt[mhi_chan->er_index];
+
+	mhi_mark_stale_events(mhi_cntrl, mhi_event, er_ctxt, chan);
+
+	mhi_reset_data_chan(mhi_cntrl, mhi_chan);
+
+	read_unlock_bh(&mhi_cntrl->pm_lock);
+}
+
+/* Move channel to start state */
+int mhi_prepare_for_transfer(struct mhi_device *mhi_dev)
+{
+	int ret, dir;
+	struct mhi_controller *mhi_cntrl = mhi_dev->mhi_cntrl;
+	struct mhi_chan *mhi_chan;
+
+	for (dir = 0; dir < 2; dir++) {
+		mhi_chan = dir ? mhi_dev->dl_chan : mhi_dev->ul_chan;
+		if (!mhi_chan)
+			continue;
+
+		ret = mhi_prepare_channel(mhi_cntrl, mhi_chan);
+		if (ret)
+			goto error_open_chan;
+	}
+
+	return 0;
+
+error_open_chan:
+	for (--dir; dir >= 0; dir--) {
+		mhi_chan = dir ? mhi_dev->dl_chan : mhi_dev->ul_chan;
+		if (!mhi_chan)
+			continue;
+
+		__mhi_unprepare_channel(mhi_cntrl, mhi_chan);
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(mhi_prepare_for_transfer);
+
+void mhi_unprepare_from_transfer(struct mhi_device *mhi_dev)
+{
+	struct mhi_controller *mhi_cntrl = mhi_dev->mhi_cntrl;
+	struct mhi_chan *mhi_chan;
+	int dir;
+
+	for (dir = 0; dir < 2; dir++) {
+		mhi_chan = dir ? mhi_dev->ul_chan : mhi_dev->dl_chan;
+		if (!mhi_chan)
+			continue;
+
+		__mhi_unprepare_channel(mhi_cntrl, mhi_chan);
+	}
+}
+EXPORT_SYMBOL_GPL(mhi_unprepare_from_transfer);
+
+int mhi_poll(struct mhi_device *mhi_dev, u32 budget)
+{
+	struct mhi_controller *mhi_cntrl = mhi_dev->mhi_cntrl;
+	struct mhi_chan *mhi_chan = mhi_dev->dl_chan;
+	struct mhi_event *mhi_event = &mhi_cntrl->mhi_event[mhi_chan->er_index];
+	int ret;
+
+	spin_lock_bh(&mhi_event->lock);
+	ret = mhi_event->process_event(mhi_cntrl, mhi_event, budget);
+	spin_unlock_bh(&mhi_event->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(mhi_poll);
diff --git a/drivers/bus/mhi/core/pm.c b/drivers/bus/mhi/core/pm.c
new file mode 100644
index 0000000..52690cb
--- /dev/null
+++ b/drivers/bus/mhi/core/pm.c
@@ -0,0 +1,969 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dma-direction.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/mhi.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/wait.h>
+#include "internal.h"
+
+/*
+ * Not all MHI state transitions are synchronous. Transitions like Linkdown,
+ * SYS_ERR, and shutdown can happen anytime asynchronously. This function will
+ * transition to a new state only if we're allowed to.
+ *
+ * Priority increases as we go down. For instance, from any state in L0, the
+ * transition can be made to states in L1, L2 and L3. A notable exception to
+ * this rule is state DISABLE.  From DISABLE state we can only transition to
+ * POR state. Also, while in L2 state, user cannot jump back to previous
+ * L1 or L0 states.
+ *
+ * Valid transitions:
+ * L0: DISABLE <--> POR
+ *     POR <--> POR
+ *     POR -> M0 -> M2 --> M0
+ *     POR -> FW_DL_ERR
+ *     FW_DL_ERR <--> FW_DL_ERR
+ *     M0 <--> M0
+ *     M0 -> FW_DL_ERR
+ *     M0 -> M3_ENTER -> M3 -> M3_EXIT --> M0
+ * L1: SYS_ERR_DETECT -> SYS_ERR_PROCESS --> POR
+ * L2: SHUTDOWN_PROCESS -> DISABLE
+ * L3: LD_ERR_FATAL_DETECT <--> LD_ERR_FATAL_DETECT
+ *     LD_ERR_FATAL_DETECT -> SHUTDOWN_PROCESS
+ */
+static struct mhi_pm_transitions const dev_state_transitions[] = {
+	/* L0 States */
+	{
+		MHI_PM_DISABLE,
+		MHI_PM_POR
+	},
+	{
+		MHI_PM_POR,
+		MHI_PM_POR | MHI_PM_DISABLE | MHI_PM_M0 |
+		MHI_PM_SYS_ERR_DETECT | MHI_PM_SHUTDOWN_PROCESS |
+		MHI_PM_LD_ERR_FATAL_DETECT | MHI_PM_FW_DL_ERR
+	},
+	{
+		MHI_PM_M0,
+		MHI_PM_M0 | MHI_PM_M2 | MHI_PM_M3_ENTER |
+		MHI_PM_SYS_ERR_DETECT | MHI_PM_SHUTDOWN_PROCESS |
+		MHI_PM_LD_ERR_FATAL_DETECT | MHI_PM_FW_DL_ERR
+	},
+	{
+		MHI_PM_M2,
+		MHI_PM_M0 | MHI_PM_SYS_ERR_DETECT | MHI_PM_SHUTDOWN_PROCESS |
+		MHI_PM_LD_ERR_FATAL_DETECT
+	},
+	{
+		MHI_PM_M3_ENTER,
+		MHI_PM_M3 | MHI_PM_SYS_ERR_DETECT | MHI_PM_SHUTDOWN_PROCESS |
+		MHI_PM_LD_ERR_FATAL_DETECT
+	},
+	{
+		MHI_PM_M3,
+		MHI_PM_M3_EXIT | MHI_PM_SYS_ERR_DETECT |
+		MHI_PM_SHUTDOWN_PROCESS | MHI_PM_LD_ERR_FATAL_DETECT
+	},
+	{
+		MHI_PM_M3_EXIT,
+		MHI_PM_M0 | MHI_PM_SYS_ERR_DETECT | MHI_PM_SHUTDOWN_PROCESS |
+		MHI_PM_LD_ERR_FATAL_DETECT
+	},
+	{
+		MHI_PM_FW_DL_ERR,
+		MHI_PM_FW_DL_ERR | MHI_PM_SYS_ERR_DETECT |
+		MHI_PM_SHUTDOWN_PROCESS | MHI_PM_LD_ERR_FATAL_DETECT
+	},
+	/* L1 States */
+	{
+		MHI_PM_SYS_ERR_DETECT,
+		MHI_PM_SYS_ERR_PROCESS | MHI_PM_SHUTDOWN_PROCESS |
+		MHI_PM_LD_ERR_FATAL_DETECT
+	},
+	{
+		MHI_PM_SYS_ERR_PROCESS,
+		MHI_PM_POR | MHI_PM_SHUTDOWN_PROCESS |
+		MHI_PM_LD_ERR_FATAL_DETECT
+	},
+	/* L2 States */
+	{
+		MHI_PM_SHUTDOWN_PROCESS,
+		MHI_PM_DISABLE | MHI_PM_LD_ERR_FATAL_DETECT
+	},
+	/* L3 States */
+	{
+		MHI_PM_LD_ERR_FATAL_DETECT,
+		MHI_PM_LD_ERR_FATAL_DETECT | MHI_PM_SHUTDOWN_PROCESS
+	},
+};
+
+enum mhi_pm_state __must_check mhi_tryset_pm_state(struct mhi_controller *mhi_cntrl,
+						   enum mhi_pm_state state)
+{
+	unsigned long cur_state = mhi_cntrl->pm_state;
+	int index = find_last_bit(&cur_state, 32);
+
+	if (unlikely(index >= ARRAY_SIZE(dev_state_transitions)))
+		return cur_state;
+
+	if (unlikely(dev_state_transitions[index].from_state != cur_state))
+		return cur_state;
+
+	if (unlikely(!(dev_state_transitions[index].to_states & state)))
+		return cur_state;
+
+	mhi_cntrl->pm_state = state;
+	return mhi_cntrl->pm_state;
+}
+
+void mhi_set_mhi_state(struct mhi_controller *mhi_cntrl, enum mhi_state state)
+{
+	if (state == MHI_STATE_RESET) {
+		mhi_write_reg_field(mhi_cntrl, mhi_cntrl->regs, MHICTRL,
+				    MHICTRL_RESET_MASK, MHICTRL_RESET_SHIFT, 1);
+	} else {
+		mhi_write_reg_field(mhi_cntrl, mhi_cntrl->regs, MHICTRL,
+				    MHICTRL_MHISTATE_MASK,
+				    MHICTRL_MHISTATE_SHIFT, state);
+	}
+}
+
+/* NOP for backward compatibility, host allowed to ring DB in M2 state */
+static void mhi_toggle_dev_wake_nop(struct mhi_controller *mhi_cntrl)
+{
+}
+
+static void mhi_toggle_dev_wake(struct mhi_controller *mhi_cntrl)
+{
+	mhi_cntrl->wake_get(mhi_cntrl, false);
+	mhi_cntrl->wake_put(mhi_cntrl, true);
+}
+
+/* Handle device ready state transition */
+int mhi_ready_state_transition(struct mhi_controller *mhi_cntrl)
+{
+	void __iomem *base = mhi_cntrl->regs;
+	struct mhi_event *mhi_event;
+	enum mhi_pm_state cur_state;
+	struct device *dev = &mhi_cntrl->mhi_dev->dev;
+	u32 reset = 1, ready = 0;
+	int ret, i;
+
+	/* Wait for RESET to be cleared and READY bit to be set by the device */
+	wait_event_timeout(mhi_cntrl->state_event,
+			   MHI_PM_IN_FATAL_STATE(mhi_cntrl->pm_state) ||
+			   mhi_read_reg_field(mhi_cntrl, base, MHICTRL,
+					      MHICTRL_RESET_MASK,
+					      MHICTRL_RESET_SHIFT, &reset) ||
+			   mhi_read_reg_field(mhi_cntrl, base, MHISTATUS,
+					      MHISTATUS_READY_MASK,
+					      MHISTATUS_READY_SHIFT, &ready) ||
+			   (!reset && ready),
+			   msecs_to_jiffies(mhi_cntrl->timeout_ms));
+
+	/* Check if device entered error state */
+	if (MHI_PM_IN_FATAL_STATE(mhi_cntrl->pm_state)) {
+		dev_err(dev, "Device link is not accessible\n");
+		return -EIO;
+	}
+
+	/* Timeout if device did not transition to ready state */
+	if (reset || !ready) {
+		dev_err(dev, "Device Ready timeout\n");
+		return -ETIMEDOUT;
+	}
+
+	dev_dbg(dev, "Device in READY State\n");
+	write_lock_irq(&mhi_cntrl->pm_lock);
+	cur_state = mhi_tryset_pm_state(mhi_cntrl, MHI_PM_POR);
+	mhi_cntrl->dev_state = MHI_STATE_READY;
+	write_unlock_irq(&mhi_cntrl->pm_lock);
+
+	if (cur_state != MHI_PM_POR) {
+		dev_err(dev, "Error moving to state %s from %s\n",
+			to_mhi_pm_state_str(MHI_PM_POR),
+			to_mhi_pm_state_str(cur_state));
+		return -EIO;
+	}
+
+	read_lock_bh(&mhi_cntrl->pm_lock);
+	if (!MHI_REG_ACCESS_VALID(mhi_cntrl->pm_state)) {
+		dev_err(dev, "Device registers not accessible\n");
+		goto error_mmio;
+	}
+
+	/* Configure MMIO registers */
+	ret = mhi_init_mmio(mhi_cntrl);
+	if (ret) {
+		dev_err(dev, "Error configuring MMIO registers\n");
+		goto error_mmio;
+	}
+
+	/* Add elements to all SW event rings */
+	mhi_event = mhi_cntrl->mhi_event;
+	for (i = 0; i < mhi_cntrl->total_ev_rings; i++, mhi_event++) {
+		struct mhi_ring *ring = &mhi_event->ring;
+
+		/* Skip if this is an offload or HW event */
+		if (mhi_event->offload_ev || mhi_event->hw_ring)
+			continue;
+
+		ring->wp = ring->base + ring->len - ring->el_size;
+		*ring->ctxt_wp = ring->iommu_base + ring->len - ring->el_size;
+		/* Update all cores */
+		smp_wmb();
+
+		/* Ring the event ring db */
+		spin_lock_irq(&mhi_event->lock);
+		mhi_ring_er_db(mhi_event);
+		spin_unlock_irq(&mhi_event->lock);
+	}
+
+	/* Set MHI to M0 state */
+	mhi_set_mhi_state(mhi_cntrl, MHI_STATE_M0);
+	read_unlock_bh(&mhi_cntrl->pm_lock);
+
+	return 0;
+
+error_mmio:
+	read_unlock_bh(&mhi_cntrl->pm_lock);
+
+	return -EIO;
+}
+
+int mhi_pm_m0_transition(struct mhi_controller *mhi_cntrl)
+{
+	enum mhi_pm_state cur_state;
+	struct mhi_chan *mhi_chan;
+	struct device *dev = &mhi_cntrl->mhi_dev->dev;
+	int i;
+
+	write_lock_irq(&mhi_cntrl->pm_lock);
+	mhi_cntrl->dev_state = MHI_STATE_M0;
+	cur_state = mhi_tryset_pm_state(mhi_cntrl, MHI_PM_M0);
+	write_unlock_irq(&mhi_cntrl->pm_lock);
+	if (unlikely(cur_state != MHI_PM_M0)) {
+		dev_err(dev, "Unable to transition to M0 state\n");
+		return -EIO;
+	}
+
+	/* Wake up the device */
+	read_lock_bh(&mhi_cntrl->pm_lock);
+	mhi_cntrl->wake_get(mhi_cntrl, true);
+
+	/* Ring all event rings and CMD ring only if we're in mission mode */
+	if (MHI_IN_MISSION_MODE(mhi_cntrl->ee)) {
+		struct mhi_event *mhi_event = mhi_cntrl->mhi_event;
+		struct mhi_cmd *mhi_cmd =
+			&mhi_cntrl->mhi_cmd[PRIMARY_CMD_RING];
+
+		for (i = 0; i < mhi_cntrl->total_ev_rings; i++, mhi_event++) {
+			if (mhi_event->offload_ev)
+				continue;
+
+			spin_lock_irq(&mhi_event->lock);
+			mhi_ring_er_db(mhi_event);
+			spin_unlock_irq(&mhi_event->lock);
+		}
+
+		/* Only ring primary cmd ring if ring is not empty */
+		spin_lock_irq(&mhi_cmd->lock);
+		if (mhi_cmd->ring.rp != mhi_cmd->ring.wp)
+			mhi_ring_cmd_db(mhi_cntrl, mhi_cmd);
+		spin_unlock_irq(&mhi_cmd->lock);
+	}
+
+	/* Ring channel DB registers */
+	mhi_chan = mhi_cntrl->mhi_chan;
+	for (i = 0; i < mhi_cntrl->max_chan; i++, mhi_chan++) {
+		struct mhi_ring *tre_ring = &mhi_chan->tre_ring;
+
+		write_lock_irq(&mhi_chan->lock);
+		if (mhi_chan->db_cfg.reset_req)
+			mhi_chan->db_cfg.db_mode = true;
+
+		/* Only ring DB if ring is not empty */
+		if (tre_ring->base && tre_ring->wp  != tre_ring->rp)
+			mhi_ring_chan_db(mhi_cntrl, mhi_chan);
+		write_unlock_irq(&mhi_chan->lock);
+	}
+
+	mhi_cntrl->wake_put(mhi_cntrl, false);
+	read_unlock_bh(&mhi_cntrl->pm_lock);
+	wake_up_all(&mhi_cntrl->state_event);
+
+	return 0;
+}
+
+/*
+ * After receiving the MHI state change event from the device indicating the
+ * transition to M1 state, the host can transition the device to M2 state
+ * for keeping it in low power state.
+ */
+void mhi_pm_m1_transition(struct mhi_controller *mhi_cntrl)
+{
+	enum mhi_pm_state state;
+	struct device *dev = &mhi_cntrl->mhi_dev->dev;
+
+	write_lock_irq(&mhi_cntrl->pm_lock);
+	state = mhi_tryset_pm_state(mhi_cntrl, MHI_PM_M2);
+	if (state == MHI_PM_M2) {
+		mhi_set_mhi_state(mhi_cntrl, MHI_STATE_M2);
+		mhi_cntrl->dev_state = MHI_STATE_M2;
+
+		write_unlock_irq(&mhi_cntrl->pm_lock);
+		wake_up_all(&mhi_cntrl->state_event);
+
+		/* If there are any pending resources, exit M2 immediately */
+		if (unlikely(atomic_read(&mhi_cntrl->pending_pkts) ||
+			     atomic_read(&mhi_cntrl->dev_wake))) {
+			dev_dbg(dev,
+				"Exiting M2, pending_pkts: %d dev_wake: %d\n",
+				atomic_read(&mhi_cntrl->pending_pkts),
+				atomic_read(&mhi_cntrl->dev_wake));
+			read_lock_bh(&mhi_cntrl->pm_lock);
+			mhi_cntrl->wake_get(mhi_cntrl, true);
+			mhi_cntrl->wake_put(mhi_cntrl, true);
+			read_unlock_bh(&mhi_cntrl->pm_lock);
+		} else {
+			mhi_cntrl->status_cb(mhi_cntrl, MHI_CB_IDLE);
+		}
+	} else {
+		write_unlock_irq(&mhi_cntrl->pm_lock);
+	}
+}
+
+/* MHI M3 completion handler */
+int mhi_pm_m3_transition(struct mhi_controller *mhi_cntrl)
+{
+	enum mhi_pm_state state;
+	struct device *dev = &mhi_cntrl->mhi_dev->dev;
+
+	write_lock_irq(&mhi_cntrl->pm_lock);
+	mhi_cntrl->dev_state = MHI_STATE_M3;
+	state = mhi_tryset_pm_state(mhi_cntrl, MHI_PM_M3);
+	write_unlock_irq(&mhi_cntrl->pm_lock);
+	if (state != MHI_PM_M3) {
+		dev_err(dev, "Unable to transition to M3 state\n");
+		return -EIO;
+	}
+
+	wake_up_all(&mhi_cntrl->state_event);
+
+	return 0;
+}
+
+/* Handle device Mission Mode transition */
+static int mhi_pm_mission_mode_transition(struct mhi_controller *mhi_cntrl)
+{
+	struct mhi_event *mhi_event;
+	struct device *dev = &mhi_cntrl->mhi_dev->dev;
+	int i, ret;
+
+	dev_dbg(dev, "Processing Mission Mode transition\n");
+
+	write_lock_irq(&mhi_cntrl->pm_lock);
+	if (MHI_REG_ACCESS_VALID(mhi_cntrl->pm_state))
+		mhi_cntrl->ee = mhi_get_exec_env(mhi_cntrl);
+	write_unlock_irq(&mhi_cntrl->pm_lock);
+
+	if (!MHI_IN_MISSION_MODE(mhi_cntrl->ee))
+		return -EIO;
+
+	wake_up_all(&mhi_cntrl->state_event);
+
+	mhi_cntrl->status_cb(mhi_cntrl, MHI_CB_EE_MISSION_MODE);
+
+	/* Force MHI to be in M0 state before continuing */
+	ret = __mhi_device_get_sync(mhi_cntrl);
+	if (ret)
+		return ret;
+
+	read_lock_bh(&mhi_cntrl->pm_lock);
+
+	if (MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state)) {
+		ret = -EIO;
+		goto error_mission_mode;
+	}
+
+	/* Add elements to all HW event rings */
+	mhi_event = mhi_cntrl->mhi_event;
+	for (i = 0; i < mhi_cntrl->total_ev_rings; i++, mhi_event++) {
+		struct mhi_ring *ring = &mhi_event->ring;
+
+		if (mhi_event->offload_ev || !mhi_event->hw_ring)
+			continue;
+
+		ring->wp = ring->base + ring->len - ring->el_size;
+		*ring->ctxt_wp = ring->iommu_base + ring->len - ring->el_size;
+		/* Update to all cores */
+		smp_wmb();
+
+		spin_lock_irq(&mhi_event->lock);
+		if (MHI_DB_ACCESS_VALID(mhi_cntrl))
+			mhi_ring_er_db(mhi_event);
+		spin_unlock_irq(&mhi_event->lock);
+	}
+
+	read_unlock_bh(&mhi_cntrl->pm_lock);
+
+	/*
+	 * The MHI devices are only created when the client device switches its
+	 * Execution Environment (EE) to either SBL or AMSS states
+	 */
+	mhi_create_devices(mhi_cntrl);
+
+	read_lock_bh(&mhi_cntrl->pm_lock);
+
+error_mission_mode:
+	mhi_cntrl->wake_put(mhi_cntrl, false);
+	read_unlock_bh(&mhi_cntrl->pm_lock);
+
+	return ret;
+}
+
+/* Handle SYS_ERR and Shutdown transitions */
+static void mhi_pm_disable_transition(struct mhi_controller *mhi_cntrl,
+				      enum mhi_pm_state transition_state)
+{
+	enum mhi_pm_state cur_state, prev_state;
+	struct mhi_event *mhi_event;
+	struct mhi_cmd_ctxt *cmd_ctxt;
+	struct mhi_cmd *mhi_cmd;
+	struct mhi_event_ctxt *er_ctxt;
+	struct device *dev = &mhi_cntrl->mhi_dev->dev;
+	int ret, i;
+
+	dev_dbg(dev, "Transitioning from PM state: %s to: %s\n",
+		to_mhi_pm_state_str(mhi_cntrl->pm_state),
+		to_mhi_pm_state_str(transition_state));
+
+	/* We must notify MHI control driver so it can clean up first */
+	if (transition_state == MHI_PM_SYS_ERR_PROCESS) {
+		/*
+		 * If controller supports RDDM, we do not process
+		 * SYS error state, instead we will jump directly
+		 * to RDDM state
+		 */
+		if (mhi_cntrl->rddm_image) {
+			dev_dbg(dev,
+				 "Controller supports RDDM, so skip SYS_ERR\n");
+			return;
+		}
+		mhi_cntrl->status_cb(mhi_cntrl, MHI_CB_SYS_ERROR);
+	}
+
+	mutex_lock(&mhi_cntrl->pm_mutex);
+	write_lock_irq(&mhi_cntrl->pm_lock);
+	prev_state = mhi_cntrl->pm_state;
+	cur_state = mhi_tryset_pm_state(mhi_cntrl, transition_state);
+	if (cur_state == transition_state) {
+		mhi_cntrl->ee = MHI_EE_DISABLE_TRANSITION;
+		mhi_cntrl->dev_state = MHI_STATE_RESET;
+	}
+	write_unlock_irq(&mhi_cntrl->pm_lock);
+
+	/* Wake up threads waiting for state transition */
+	wake_up_all(&mhi_cntrl->state_event);
+
+	if (cur_state != transition_state) {
+		dev_err(dev, "Failed to transition to state: %s from: %s\n",
+			to_mhi_pm_state_str(transition_state),
+			to_mhi_pm_state_str(cur_state));
+		mutex_unlock(&mhi_cntrl->pm_mutex);
+		return;
+	}
+
+	/* Trigger MHI RESET so that the device will not access host memory */
+	if (MHI_REG_ACCESS_VALID(prev_state)) {
+		u32 in_reset = -1;
+		unsigned long timeout = msecs_to_jiffies(mhi_cntrl->timeout_ms);
+
+		dev_dbg(dev, "Triggering MHI Reset in device\n");
+		mhi_set_mhi_state(mhi_cntrl, MHI_STATE_RESET);
+
+		/* Wait for the reset bit to be cleared by the device */
+		ret = wait_event_timeout(mhi_cntrl->state_event,
+					 mhi_read_reg_field(mhi_cntrl,
+							    mhi_cntrl->regs,
+							    MHICTRL,
+							    MHICTRL_RESET_MASK,
+							    MHICTRL_RESET_SHIFT,
+							    &in_reset) ||
+					!in_reset, timeout);
+		if ((!ret || in_reset) && cur_state == MHI_PM_SYS_ERR_PROCESS) {
+			dev_err(dev, "Device failed to exit MHI Reset state\n");
+			mutex_unlock(&mhi_cntrl->pm_mutex);
+			return;
+		}
+
+		/*
+		 * Device will clear BHI_INTVEC as a part of RESET processing,
+		 * hence re-program it
+		 */
+		mhi_write_reg(mhi_cntrl, mhi_cntrl->bhi, BHI_INTVEC, 0);
+	}
+
+	dev_dbg(dev,
+		 "Waiting for all pending event ring processing to complete\n");
+	mhi_event = mhi_cntrl->mhi_event;
+	for (i = 0; i < mhi_cntrl->total_ev_rings; i++, mhi_event++) {
+		if (mhi_event->offload_ev)
+			continue;
+		tasklet_kill(&mhi_event->task);
+	}
+
+	/* Release lock and wait for all pending threads to complete */
+	mutex_unlock(&mhi_cntrl->pm_mutex);
+	dev_dbg(dev, "Waiting for all pending threads to complete\n");
+	wake_up_all(&mhi_cntrl->state_event);
+	flush_work(&mhi_cntrl->st_worker);
+	flush_work(&mhi_cntrl->fw_worker);
+
+	dev_dbg(dev, "Reset all active channels and remove MHI devices\n");
+	device_for_each_child(mhi_cntrl->cntrl_dev, NULL, mhi_destroy_device);
+
+	mutex_lock(&mhi_cntrl->pm_mutex);
+
+	WARN_ON(atomic_read(&mhi_cntrl->dev_wake));
+	WARN_ON(atomic_read(&mhi_cntrl->pending_pkts));
+
+	/* Reset the ev rings and cmd rings */
+	dev_dbg(dev, "Resetting EV CTXT and CMD CTXT\n");
+	mhi_cmd = mhi_cntrl->mhi_cmd;
+	cmd_ctxt = mhi_cntrl->mhi_ctxt->cmd_ctxt;
+	for (i = 0; i < NR_OF_CMD_RINGS; i++, mhi_cmd++, cmd_ctxt++) {
+		struct mhi_ring *ring = &mhi_cmd->ring;
+
+		ring->rp = ring->base;
+		ring->wp = ring->base;
+		cmd_ctxt->rp = cmd_ctxt->rbase;
+		cmd_ctxt->wp = cmd_ctxt->rbase;
+	}
+
+	mhi_event = mhi_cntrl->mhi_event;
+	er_ctxt = mhi_cntrl->mhi_ctxt->er_ctxt;
+	for (i = 0; i < mhi_cntrl->total_ev_rings; i++, er_ctxt++,
+		     mhi_event++) {
+		struct mhi_ring *ring = &mhi_event->ring;
+
+		/* Skip offload events */
+		if (mhi_event->offload_ev)
+			continue;
+
+		ring->rp = ring->base;
+		ring->wp = ring->base;
+		er_ctxt->rp = er_ctxt->rbase;
+		er_ctxt->wp = er_ctxt->rbase;
+	}
+
+	if (cur_state == MHI_PM_SYS_ERR_PROCESS) {
+		mhi_ready_state_transition(mhi_cntrl);
+	} else {
+		/* Move to disable state */
+		write_lock_irq(&mhi_cntrl->pm_lock);
+		cur_state = mhi_tryset_pm_state(mhi_cntrl, MHI_PM_DISABLE);
+		write_unlock_irq(&mhi_cntrl->pm_lock);
+		if (unlikely(cur_state != MHI_PM_DISABLE))
+			dev_err(dev, "Error moving from PM state: %s to: %s\n",
+				to_mhi_pm_state_str(cur_state),
+				to_mhi_pm_state_str(MHI_PM_DISABLE));
+	}
+
+	dev_dbg(dev, "Exiting with PM state: %s, MHI state: %s\n",
+		to_mhi_pm_state_str(mhi_cntrl->pm_state),
+		TO_MHI_STATE_STR(mhi_cntrl->dev_state));
+
+	mutex_unlock(&mhi_cntrl->pm_mutex);
+}
+
+/* Queue a new work item and schedule work */
+int mhi_queue_state_transition(struct mhi_controller *mhi_cntrl,
+			       enum dev_st_transition state)
+{
+	struct state_transition *item = kmalloc(sizeof(*item), GFP_ATOMIC);
+	unsigned long flags;
+
+	if (!item)
+		return -ENOMEM;
+
+	item->state = state;
+	spin_lock_irqsave(&mhi_cntrl->transition_lock, flags);
+	list_add_tail(&item->node, &mhi_cntrl->transition_list);
+	spin_unlock_irqrestore(&mhi_cntrl->transition_lock, flags);
+
+	schedule_work(&mhi_cntrl->st_worker);
+
+	return 0;
+}
+
+/* SYS_ERR worker */
+void mhi_pm_sys_err_worker(struct work_struct *work)
+{
+	struct mhi_controller *mhi_cntrl = container_of(work,
+							struct mhi_controller,
+							syserr_worker);
+
+	mhi_pm_disable_transition(mhi_cntrl, MHI_PM_SYS_ERR_PROCESS);
+}
+
+/* Device State Transition worker */
+void mhi_pm_st_worker(struct work_struct *work)
+{
+	struct state_transition *itr, *tmp;
+	LIST_HEAD(head);
+	struct mhi_controller *mhi_cntrl = container_of(work,
+							struct mhi_controller,
+							st_worker);
+	struct device *dev = &mhi_cntrl->mhi_dev->dev;
+
+	spin_lock_irq(&mhi_cntrl->transition_lock);
+	list_splice_tail_init(&mhi_cntrl->transition_list, &head);
+	spin_unlock_irq(&mhi_cntrl->transition_lock);
+
+	list_for_each_entry_safe(itr, tmp, &head, node) {
+		list_del(&itr->node);
+		dev_dbg(dev, "Handling state transition: %s\n",
+			TO_DEV_STATE_TRANS_STR(itr->state));
+
+		switch (itr->state) {
+		case DEV_ST_TRANSITION_PBL:
+			write_lock_irq(&mhi_cntrl->pm_lock);
+			if (MHI_REG_ACCESS_VALID(mhi_cntrl->pm_state))
+				mhi_cntrl->ee = mhi_get_exec_env(mhi_cntrl);
+			write_unlock_irq(&mhi_cntrl->pm_lock);
+			if (MHI_IN_PBL(mhi_cntrl->ee))
+				wake_up_all(&mhi_cntrl->state_event);
+			break;
+		case DEV_ST_TRANSITION_SBL:
+			write_lock_irq(&mhi_cntrl->pm_lock);
+			mhi_cntrl->ee = MHI_EE_SBL;
+			write_unlock_irq(&mhi_cntrl->pm_lock);
+			/*
+			 * The MHI devices are only created when the client
+			 * device switches its Execution Environment (EE) to
+			 * either SBL or AMSS states
+			 */
+			mhi_create_devices(mhi_cntrl);
+			break;
+		case DEV_ST_TRANSITION_MISSION_MODE:
+			mhi_pm_mission_mode_transition(mhi_cntrl);
+			break;
+		case DEV_ST_TRANSITION_READY:
+			mhi_ready_state_transition(mhi_cntrl);
+			break;
+		default:
+			break;
+		}
+		kfree(itr);
+	}
+}
+
+int __mhi_device_get_sync(struct mhi_controller *mhi_cntrl)
+{
+	int ret;
+
+	/* Wake up the device */
+	read_lock_bh(&mhi_cntrl->pm_lock);
+	mhi_cntrl->wake_get(mhi_cntrl, true);
+	if (MHI_PM_IN_SUSPEND_STATE(mhi_cntrl->pm_state)) {
+		pm_wakeup_event(&mhi_cntrl->mhi_dev->dev, 0);
+		mhi_cntrl->runtime_get(mhi_cntrl);
+		mhi_cntrl->runtime_put(mhi_cntrl);
+	}
+	read_unlock_bh(&mhi_cntrl->pm_lock);
+
+	ret = wait_event_timeout(mhi_cntrl->state_event,
+				 mhi_cntrl->pm_state == MHI_PM_M0 ||
+				 MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state),
+				 msecs_to_jiffies(mhi_cntrl->timeout_ms));
+
+	if (!ret || MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state)) {
+		read_lock_bh(&mhi_cntrl->pm_lock);
+		mhi_cntrl->wake_put(mhi_cntrl, false);
+		read_unlock_bh(&mhi_cntrl->pm_lock);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/* Assert device wake db */
+static void mhi_assert_dev_wake(struct mhi_controller *mhi_cntrl, bool force)
+{
+	unsigned long flags;
+
+	/*
+	 * If force flag is set, then increment the wake count value and
+	 * ring wake db
+	 */
+	if (unlikely(force)) {
+		spin_lock_irqsave(&mhi_cntrl->wlock, flags);
+		atomic_inc(&mhi_cntrl->dev_wake);
+		if (MHI_WAKE_DB_FORCE_SET_VALID(mhi_cntrl->pm_state) &&
+		    !mhi_cntrl->wake_set) {
+			mhi_write_db(mhi_cntrl, mhi_cntrl->wake_db, 1);
+			mhi_cntrl->wake_set = true;
+		}
+		spin_unlock_irqrestore(&mhi_cntrl->wlock, flags);
+	} else {
+		/*
+		 * If resources are already requested, then just increment
+		 * the wake count value and return
+		 */
+		if (likely(atomic_add_unless(&mhi_cntrl->dev_wake, 1, 0)))
+			return;
+
+		spin_lock_irqsave(&mhi_cntrl->wlock, flags);
+		if ((atomic_inc_return(&mhi_cntrl->dev_wake) == 1) &&
+		    MHI_WAKE_DB_SET_VALID(mhi_cntrl->pm_state) &&
+		    !mhi_cntrl->wake_set) {
+			mhi_write_db(mhi_cntrl, mhi_cntrl->wake_db, 1);
+			mhi_cntrl->wake_set = true;
+		}
+		spin_unlock_irqrestore(&mhi_cntrl->wlock, flags);
+	}
+}
+
+/* De-assert device wake db */
+static void mhi_deassert_dev_wake(struct mhi_controller *mhi_cntrl,
+				  bool override)
+{
+	unsigned long flags;
+
+	/*
+	 * Only continue if there is a single resource, else just decrement
+	 * and return
+	 */
+	if (likely(atomic_add_unless(&mhi_cntrl->dev_wake, -1, 1)))
+		return;
+
+	spin_lock_irqsave(&mhi_cntrl->wlock, flags);
+	if ((atomic_dec_return(&mhi_cntrl->dev_wake) == 0) &&
+	    MHI_WAKE_DB_CLEAR_VALID(mhi_cntrl->pm_state) && !override &&
+	    mhi_cntrl->wake_set) {
+		mhi_write_db(mhi_cntrl, mhi_cntrl->wake_db, 0);
+		mhi_cntrl->wake_set = false;
+	}
+	spin_unlock_irqrestore(&mhi_cntrl->wlock, flags);
+}
+
+int mhi_async_power_up(struct mhi_controller *mhi_cntrl)
+{
+	enum mhi_ee_type current_ee;
+	enum dev_st_transition next_state;
+	struct device *dev = &mhi_cntrl->mhi_dev->dev;
+	u32 val;
+	int ret;
+
+	dev_info(dev, "Requested to power ON\n");
+
+	if (mhi_cntrl->nr_irqs < mhi_cntrl->total_ev_rings)
+		return -EINVAL;
+
+	/* Supply default wake routines if not provided by controller driver */
+	if (!mhi_cntrl->wake_get || !mhi_cntrl->wake_put ||
+	    !mhi_cntrl->wake_toggle) {
+		mhi_cntrl->wake_get = mhi_assert_dev_wake;
+		mhi_cntrl->wake_put = mhi_deassert_dev_wake;
+		mhi_cntrl->wake_toggle = (mhi_cntrl->db_access & MHI_PM_M2) ?
+			mhi_toggle_dev_wake_nop : mhi_toggle_dev_wake;
+	}
+
+	mutex_lock(&mhi_cntrl->pm_mutex);
+	mhi_cntrl->pm_state = MHI_PM_DISABLE;
+
+	if (!mhi_cntrl->pre_init) {
+		/* Setup device context */
+		ret = mhi_init_dev_ctxt(mhi_cntrl);
+		if (ret)
+			goto error_dev_ctxt;
+	}
+
+	ret = mhi_init_irq_setup(mhi_cntrl);
+	if (ret)
+		goto error_setup_irq;
+
+	/* Setup BHI offset & INTVEC */
+	write_lock_irq(&mhi_cntrl->pm_lock);
+	ret = mhi_read_reg(mhi_cntrl, mhi_cntrl->regs, BHIOFF, &val);
+	if (ret) {
+		write_unlock_irq(&mhi_cntrl->pm_lock);
+		goto error_bhi_offset;
+	}
+
+	mhi_cntrl->bhi = mhi_cntrl->regs + val;
+
+	/* Setup BHIE offset */
+	if (mhi_cntrl->fbc_download) {
+		ret = mhi_read_reg(mhi_cntrl, mhi_cntrl->regs, BHIEOFF, &val);
+		if (ret) {
+			write_unlock_irq(&mhi_cntrl->pm_lock);
+			dev_err(dev, "Error reading BHIE offset\n");
+			goto error_bhi_offset;
+		}
+
+		mhi_cntrl->bhie = mhi_cntrl->regs + val;
+	}
+
+	mhi_write_reg(mhi_cntrl, mhi_cntrl->bhi, BHI_INTVEC, 0);
+	mhi_cntrl->pm_state = MHI_PM_POR;
+	mhi_cntrl->ee = MHI_EE_MAX;
+	current_ee = mhi_get_exec_env(mhi_cntrl);
+	write_unlock_irq(&mhi_cntrl->pm_lock);
+
+	/* Confirm that the device is in valid exec env */
+	if (!MHI_IN_PBL(current_ee) && current_ee != MHI_EE_AMSS) {
+		dev_err(dev, "Not a valid EE for power on\n");
+		ret = -EIO;
+		goto error_bhi_offset;
+	}
+
+	/* Transition to next state */
+	next_state = MHI_IN_PBL(current_ee) ?
+		DEV_ST_TRANSITION_PBL : DEV_ST_TRANSITION_READY;
+
+	if (next_state == DEV_ST_TRANSITION_PBL)
+		schedule_work(&mhi_cntrl->fw_worker);
+
+	mhi_queue_state_transition(mhi_cntrl, next_state);
+
+	mutex_unlock(&mhi_cntrl->pm_mutex);
+
+	dev_info(dev, "Power on setup success\n");
+
+	return 0;
+
+error_bhi_offset:
+	mhi_deinit_free_irq(mhi_cntrl);
+
+error_setup_irq:
+	if (!mhi_cntrl->pre_init)
+		mhi_deinit_dev_ctxt(mhi_cntrl);
+
+error_dev_ctxt:
+	mutex_unlock(&mhi_cntrl->pm_mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(mhi_async_power_up);
+
+void mhi_power_down(struct mhi_controller *mhi_cntrl, bool graceful)
+{
+	enum mhi_pm_state cur_state;
+	struct device *dev = &mhi_cntrl->mhi_dev->dev;
+
+	/* If it's not a graceful shutdown, force MHI to linkdown state */
+	if (!graceful) {
+		mutex_lock(&mhi_cntrl->pm_mutex);
+		write_lock_irq(&mhi_cntrl->pm_lock);
+		cur_state = mhi_tryset_pm_state(mhi_cntrl,
+						MHI_PM_LD_ERR_FATAL_DETECT);
+		write_unlock_irq(&mhi_cntrl->pm_lock);
+		mutex_unlock(&mhi_cntrl->pm_mutex);
+		if (cur_state != MHI_PM_LD_ERR_FATAL_DETECT)
+			dev_dbg(dev, "Failed to move to state: %s from: %s\n",
+				to_mhi_pm_state_str(MHI_PM_LD_ERR_FATAL_DETECT),
+				to_mhi_pm_state_str(mhi_cntrl->pm_state));
+	}
+	mhi_pm_disable_transition(mhi_cntrl, MHI_PM_SHUTDOWN_PROCESS);
+	mhi_deinit_free_irq(mhi_cntrl);
+
+	if (!mhi_cntrl->pre_init) {
+		/* Free all allocated resources */
+		if (mhi_cntrl->fbc_image) {
+			mhi_free_bhie_table(mhi_cntrl, mhi_cntrl->fbc_image);
+			mhi_cntrl->fbc_image = NULL;
+		}
+		mhi_deinit_dev_ctxt(mhi_cntrl);
+	}
+}
+EXPORT_SYMBOL_GPL(mhi_power_down);
+
+int mhi_sync_power_up(struct mhi_controller *mhi_cntrl)
+{
+	int ret = mhi_async_power_up(mhi_cntrl);
+
+	if (ret)
+		return ret;
+
+	wait_event_timeout(mhi_cntrl->state_event,
+			   MHI_IN_MISSION_MODE(mhi_cntrl->ee) ||
+			   MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state),
+			   msecs_to_jiffies(mhi_cntrl->timeout_ms));
+
+	return (MHI_IN_MISSION_MODE(mhi_cntrl->ee)) ? 0 : -EIO;
+}
+EXPORT_SYMBOL(mhi_sync_power_up);
+
+int mhi_force_rddm_mode(struct mhi_controller *mhi_cntrl)
+{
+	struct device *dev = &mhi_cntrl->mhi_dev->dev;
+	int ret;
+
+	/* Check if device is already in RDDM */
+	if (mhi_cntrl->ee == MHI_EE_RDDM)
+		return 0;
+
+	dev_dbg(dev, "Triggering SYS_ERR to force RDDM state\n");
+	mhi_set_mhi_state(mhi_cntrl, MHI_STATE_SYS_ERR);
+
+	/* Wait for RDDM event */
+	ret = wait_event_timeout(mhi_cntrl->state_event,
+				 mhi_cntrl->ee == MHI_EE_RDDM,
+				 msecs_to_jiffies(mhi_cntrl->timeout_ms));
+	ret = ret ? 0 : -EIO;
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(mhi_force_rddm_mode);
+
+void mhi_device_get(struct mhi_device *mhi_dev)
+{
+	struct mhi_controller *mhi_cntrl = mhi_dev->mhi_cntrl;
+
+	mhi_dev->dev_wake++;
+	read_lock_bh(&mhi_cntrl->pm_lock);
+	mhi_cntrl->wake_get(mhi_cntrl, true);
+	read_unlock_bh(&mhi_cntrl->pm_lock);
+}
+EXPORT_SYMBOL_GPL(mhi_device_get);
+
+int mhi_device_get_sync(struct mhi_device *mhi_dev)
+{
+	struct mhi_controller *mhi_cntrl = mhi_dev->mhi_cntrl;
+	int ret;
+
+	ret = __mhi_device_get_sync(mhi_cntrl);
+	if (!ret)
+		mhi_dev->dev_wake++;
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(mhi_device_get_sync);
+
+void mhi_device_put(struct mhi_device *mhi_dev)
+{
+	struct mhi_controller *mhi_cntrl = mhi_dev->mhi_cntrl;
+
+	mhi_dev->dev_wake--;
+	read_lock_bh(&mhi_cntrl->pm_lock);
+	if (MHI_PM_IN_SUSPEND_STATE(mhi_cntrl->pm_state)) {
+		mhi_cntrl->runtime_get(mhi_cntrl);
+		mhi_cntrl->runtime_put(mhi_cntrl);
+	}
+
+	mhi_cntrl->wake_put(mhi_cntrl, false);
+	read_unlock_bh(&mhi_cntrl->pm_lock);
+}
+EXPORT_SYMBOL_GPL(mhi_device_put);
diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
index 4400196..e5f5f48d 100644
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -7,6 +7,7 @@
 #include <linux/clk.h>
 #include <linux/clkdev.h>
 #include <linux/delay.h>
+#include <linux/list.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/pm_domain.h>
@@ -15,15 +16,47 @@
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/slab.h>
+#include <linux/sys_soc.h>
 #include <linux/iopoll.h>
 
 #include <linux/platform_data/ti-sysc.h>
 
 #include <dt-bindings/bus/ti-sysc.h>
 
+#define DIS_ISP		BIT(2)
+#define DIS_IVA		BIT(1)
+#define DIS_SGX		BIT(0)
+
+#define SOC_FLAG(match, flag)	{ .machine = match, .data = (void *)(flag), }
+
 #define MAX_MODULE_SOFTRESET_WAIT		10000
 
-static const char * const reg_names[] = { "rev", "sysc", "syss", };
+enum sysc_soc {
+	SOC_UNKNOWN,
+	SOC_2420,
+	SOC_2430,
+	SOC_3430,
+	SOC_3630,
+	SOC_4430,
+	SOC_4460,
+	SOC_4470,
+	SOC_5430,
+	SOC_AM3,
+	SOC_AM4,
+	SOC_DRA7,
+};
+
+struct sysc_address {
+	unsigned long base;
+	struct list_head node;
+};
+
+struct sysc_soc_info {
+	unsigned long general_purpose:1;
+	enum sysc_soc soc;
+	struct mutex list_lock;			/* disabled modules list lock */
+	struct list_head disabled_modules;
+};
 
 enum sysc_clocks {
 	SYSC_FCK,
@@ -39,6 +72,8 @@ enum sysc_clocks {
 	SYSC_MAX_CLOCKS,
 };
 
+static struct sysc_soc_info *sysc_soc;
+static const char * const reg_names[] = { "rev", "sysc", "syss", };
 static const char * const clock_names[SYSC_MAX_CLOCKS] = {
 	"fck", "ick", "opt0", "opt1", "opt2", "opt3", "opt4",
 	"opt5", "opt6", "opt7",
@@ -70,11 +105,13 @@ static const char * const clock_names[SYSC_MAX_CLOCKS] = {
  * @child_needs_resume: runtime resume needed for child on resume from suspend
  * @disable_on_idle: status flag used for disabling modules with resets
  * @idle_work: work structure used to perform delayed idle on a module
- * @clk_enable_quirk: module specific clock enable quirk
- * @clk_disable_quirk: module specific clock disable quirk
+ * @pre_reset_quirk: module specific pre-reset quirk
+ * @post_reset_quirk: module specific post-reset quirk
  * @reset_done_quirk: module specific reset done quirk
  * @module_enable_quirk: module specific enable quirk
  * @module_disable_quirk: module specific disable quirk
+ * @module_unlock_quirk: module specific sysconfig unlock quirk
+ * @module_lock_quirk: module specific sysconfig lock quirk
  */
 struct sysc {
 	struct device *dev;
@@ -97,11 +134,13 @@ struct sysc {
 	unsigned int needs_resume:1;
 	unsigned int child_needs_resume:1;
 	struct delayed_work idle_work;
-	void (*clk_enable_quirk)(struct sysc *sysc);
-	void (*clk_disable_quirk)(struct sysc *sysc);
+	void (*pre_reset_quirk)(struct sysc *sysc);
+	void (*post_reset_quirk)(struct sysc *sysc);
 	void (*reset_done_quirk)(struct sysc *sysc);
 	void (*module_enable_quirk)(struct sysc *sysc);
 	void (*module_disable_quirk)(struct sysc *sysc);
+	void (*module_unlock_quirk)(struct sysc *sysc);
+	void (*module_lock_quirk)(struct sysc *sysc);
 };
 
 static void sysc_parse_dts_quirks(struct sysc *ddata, struct device_node *np,
@@ -624,7 +663,7 @@ static void sysc_check_one_child(struct sysc *ddata,
 	const char *name;
 
 	name = of_get_property(np, "ti,hwmods", NULL);
-	if (name)
+	if (name && !of_device_is_compatible(np, "ti,sysc"))
 		dev_warn(ddata->dev, "really a child ti,hwmods property?");
 
 	sysc_check_quirk_stdout(ddata, np);
@@ -861,6 +900,22 @@ static void sysc_show_registers(struct sysc *ddata)
 		buf);
 }
 
+/**
+ * sysc_write_sysconfig - handle sysconfig quirks for register write
+ * @ddata: device driver data
+ * @value: register value
+ */
+static void sysc_write_sysconfig(struct sysc *ddata, u32 value)
+{
+	if (ddata->module_unlock_quirk)
+		ddata->module_unlock_quirk(ddata);
+
+	sysc_write(ddata, ddata->offsets[SYSC_SYSCONFIG], value);
+
+	if (ddata->module_lock_quirk)
+		ddata->module_lock_quirk(ddata);
+}
+
 #define SYSC_IDLE_MASK	(SYSC_NR_IDLEMODES - 1)
 #define SYSC_CLOCACT_ICK	2
 
@@ -907,7 +962,7 @@ static int sysc_enable_module(struct device *dev)
 
 	reg &= ~(SYSC_IDLE_MASK << regbits->sidle_shift);
 	reg |= best_mode << regbits->sidle_shift;
-	sysc_write(ddata, ddata->offsets[SYSC_SYSCONFIG], reg);
+	sysc_write_sysconfig(ddata, reg);
 
 set_midle:
 	/* Set MIDLE mode */
@@ -926,14 +981,14 @@ static int sysc_enable_module(struct device *dev)
 
 	reg &= ~(SYSC_IDLE_MASK << regbits->midle_shift);
 	reg |= best_mode << regbits->midle_shift;
-	sysc_write(ddata, ddata->offsets[SYSC_SYSCONFIG], reg);
+	sysc_write_sysconfig(ddata, reg);
 
 set_autoidle:
 	/* Autoidle bit must enabled separately if available */
 	if (regbits->autoidle_shift >= 0 &&
 	    ddata->cfg.sysc_val & BIT(regbits->autoidle_shift)) {
 		reg |= 1 << regbits->autoidle_shift;
-		sysc_write(ddata, ddata->offsets[SYSC_SYSCONFIG], reg);
+		sysc_write_sysconfig(ddata, reg);
 	}
 
 	if (ddata->module_enable_quirk)
@@ -991,7 +1046,7 @@ static int sysc_disable_module(struct device *dev)
 
 	reg &= ~(SYSC_IDLE_MASK << regbits->midle_shift);
 	reg |= best_mode << regbits->midle_shift;
-	sysc_write(ddata, ddata->offsets[SYSC_SYSCONFIG], reg);
+	sysc_write_sysconfig(ddata, reg);
 
 set_sidle:
 	/* Set SIDLE mode */
@@ -1014,7 +1069,7 @@ static int sysc_disable_module(struct device *dev)
 	if (regbits->autoidle_shift >= 0 &&
 	    ddata->cfg.sysc_val & BIT(regbits->autoidle_shift))
 		reg |= 1 << regbits->autoidle_shift;
-	sysc_write(ddata, ddata->offsets[SYSC_SYSCONFIG], reg);
+	sysc_write_sysconfig(ddata, reg);
 
 	return 0;
 }
@@ -1216,16 +1271,16 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
 		   SYSC_QUIRK_LEGACY_IDLE | SYSC_QUIRK_OPT_CLKS_IN_RESET),
 	SYSC_QUIRK("sham", 0, 0x100, 0x110, 0x114, 0x40000c03, 0xffffffff,
 		   SYSC_QUIRK_LEGACY_IDLE),
-	SYSC_QUIRK("smartreflex", 0, -1, 0x24, -1, 0x00000000, 0xffffffff,
+	SYSC_QUIRK("smartreflex", 0, -ENODEV, 0x24, -ENODEV, 0x00000000, 0xffffffff,
 		   SYSC_QUIRK_LEGACY_IDLE),
-	SYSC_QUIRK("smartreflex", 0, -1, 0x38, -1, 0x00000000, 0xffffffff,
+	SYSC_QUIRK("smartreflex", 0, -ENODEV, 0x38, -ENODEV, 0x00000000, 0xffffffff,
 		   SYSC_QUIRK_LEGACY_IDLE),
 	SYSC_QUIRK("timer", 0, 0, 0x10, 0x14, 0x00000015, 0xffffffff,
 		   0),
 	/* Some timers on omap4 and later */
-	SYSC_QUIRK("timer", 0, 0, 0x10, -1, 0x50002100, 0xffffffff,
+	SYSC_QUIRK("timer", 0, 0, 0x10, -ENODEV, 0x50002100, 0xffffffff,
 		   0),
-	SYSC_QUIRK("timer", 0, 0, 0x10, -1, 0x4fff1301, 0xffff00ff,
+	SYSC_QUIRK("timer", 0, 0, 0x10, -ENODEV, 0x4fff1301, 0xffff00ff,
 		   0),
 	SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x00000046, 0xffffffff,
 		   SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE),
@@ -1238,19 +1293,27 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
 		   SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE),
 
 	/* Quirks that need to be set based on the module address */
-	SYSC_QUIRK("mcpdm", 0x40132000, 0, 0x10, -1, 0x50000800, 0xffffffff,
+	SYSC_QUIRK("mcpdm", 0x40132000, 0, 0x10, -ENODEV, 0x50000800, 0xffffffff,
 		   SYSC_QUIRK_EXT_OPT_CLOCK | SYSC_QUIRK_NO_RESET_ON_INIT |
 		   SYSC_QUIRK_SWSUP_SIDLE),
 
 	/* Quirks that need to be set based on detected module */
-	SYSC_QUIRK("aess", 0, 0, 0x10, -1, 0x40000000, 0xffffffff,
+	SYSC_QUIRK("aess", 0, 0, 0x10, -ENODEV, 0x40000000, 0xffffffff,
 		   SYSC_MODULE_QUIRK_AESS),
-	SYSC_QUIRK("dcan", 0x48480000, 0x20, -1, -1, 0xa3170504, 0xffffffff,
+	SYSC_QUIRK("dcan", 0x48480000, 0x20, -ENODEV, -ENODEV, 0xa3170504, 0xffffffff,
 		   SYSC_QUIRK_CLKDM_NOAUTO),
-	SYSC_QUIRK("dwc3", 0x48880000, 0, 0x10, -1, 0x500a0200, 0xffffffff,
+	SYSC_QUIRK("dss", 0x4832a000, 0, 0x10, 0x14, 0x00000020, 0xffffffff,
+		   SYSC_QUIRK_OPT_CLKS_IN_RESET | SYSC_MODULE_QUIRK_DSS_RESET),
+	SYSC_QUIRK("dss", 0x58000000, 0, -ENODEV, 0x14, 0x00000040, 0xffffffff,
+		   SYSC_QUIRK_OPT_CLKS_IN_RESET | SYSC_MODULE_QUIRK_DSS_RESET),
+	SYSC_QUIRK("dss", 0x58000000, 0, -ENODEV, 0x14, 0x00000061, 0xffffffff,
+		   SYSC_QUIRK_OPT_CLKS_IN_RESET | SYSC_MODULE_QUIRK_DSS_RESET),
+	SYSC_QUIRK("dwc3", 0x48880000, 0, 0x10, -ENODEV, 0x500a0200, 0xffffffff,
 		   SYSC_QUIRK_CLKDM_NOAUTO),
-	SYSC_QUIRK("dwc3", 0x488c0000, 0, 0x10, -1, 0x500a0200, 0xffffffff,
+	SYSC_QUIRK("dwc3", 0x488c0000, 0, 0x10, -ENODEV, 0x500a0200, 0xffffffff,
 		   SYSC_QUIRK_CLKDM_NOAUTO),
+	SYSC_QUIRK("hdmi", 0, 0, 0x10, -ENODEV, 0x50030200, 0xffffffff,
+		   SYSC_QUIRK_OPT_CLKS_NEEDED),
 	SYSC_QUIRK("hdq1w", 0, 0, 0x14, 0x18, 0x00000006, 0xffffffff,
 		   SYSC_MODULE_QUIRK_HDQ1W),
 	SYSC_QUIRK("hdq1w", 0, 0, 0x14, 0x18, 0x0000000a, 0xffffffff,
@@ -1263,72 +1326,92 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
 		   SYSC_MODULE_QUIRK_I2C),
 	SYSC_QUIRK("i2c", 0, 0, 0x10, 0x90, 0x5040000a, 0xfffff0f0,
 		   SYSC_MODULE_QUIRK_I2C),
-	SYSC_QUIRK("gpu", 0x50000000, 0x14, -1, -1, 0x00010201, 0xffffffff, 0),
-	SYSC_QUIRK("gpu", 0x50000000, 0xfe00, 0xfe10, -1, 0x40000000 , 0xffffffff,
+	SYSC_QUIRK("gpu", 0x50000000, 0x14, -ENODEV, -ENODEV, 0x00010201, 0xffffffff, 0),
+	SYSC_QUIRK("gpu", 0x50000000, 0xfe00, 0xfe10, -ENODEV, 0x40000000 , 0xffffffff,
 		   SYSC_MODULE_QUIRK_SGX),
-	SYSC_QUIRK("lcdc", 0, 0, 0x54, -1, 0x4f201000, 0xffffffff,
+	SYSC_QUIRK("lcdc", 0, 0, 0x54, -ENODEV, 0x4f201000, 0xffffffff,
+		   SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_SWSUP_MSTANDBY),
+	SYSC_QUIRK("rtc", 0, 0x74, 0x78, -ENODEV, 0x4eb01908, 0xffff00f0,
+		   SYSC_MODULE_QUIRK_RTC_UNLOCK),
+	SYSC_QUIRK("tptc", 0, 0, 0x10, -ENODEV, 0x40006c00, 0xffffefff,
+		   SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_SWSUP_MSTANDBY),
+	SYSC_QUIRK("tptc", 0, 0, -ENODEV, -ENODEV, 0x40007c00, 0xffffffff,
 		   SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_SWSUP_MSTANDBY),
 	SYSC_QUIRK("usb_otg_hs", 0, 0x400, 0x404, 0x408, 0x00000050,
 		   0xffffffff, SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_SWSUP_MSTANDBY),
-	SYSC_QUIRK("usb_otg_hs", 0, 0, 0x10, -1, 0x4ea2080d, 0xffffffff,
+	SYSC_QUIRK("usb_otg_hs", 0, 0, 0x10, -ENODEV, 0x4ea2080d, 0xffffffff,
 		   SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_SWSUP_MSTANDBY),
 	SYSC_QUIRK("wdt", 0, 0, 0x10, 0x14, 0x502a0500, 0xfffff0f0,
 		   SYSC_MODULE_QUIRK_WDT),
+	/* PRUSS on am3, am4 and am5 */
+	SYSC_QUIRK("pruss", 0, 0x26000, 0x26004, -ENODEV, 0x47000000, 0xff000000,
+		   SYSC_MODULE_QUIRK_PRUSS),
 	/* Watchdog on am3 and am4 */
 	SYSC_QUIRK("wdt", 0x44e35000, 0, 0x10, 0x14, 0x502a0500, 0xfffff0f0,
 		   SYSC_MODULE_QUIRK_WDT | SYSC_QUIRK_SWSUP_SIDLE),
 
 #ifdef DEBUG
-	SYSC_QUIRK("adc", 0, 0, 0x10, -1, 0x47300001, 0xffffffff, 0),
-	SYSC_QUIRK("atl", 0, 0, -1, -1, 0x0a070100, 0xffffffff, 0),
-	SYSC_QUIRK("cm", 0, 0, -1, -1, 0x40000301, 0xffffffff, 0),
-	SYSC_QUIRK("control", 0, 0, 0x10, -1, 0x40000900, 0xffffffff, 0),
+	SYSC_QUIRK("adc", 0, 0, 0x10, -ENODEV, 0x47300001, 0xffffffff, 0),
+	SYSC_QUIRK("atl", 0, 0, -ENODEV, -ENODEV, 0x0a070100, 0xffffffff, 0),
+	SYSC_QUIRK("cm", 0, 0, -ENODEV, -ENODEV, 0x40000301, 0xffffffff, 0),
+	SYSC_QUIRK("control", 0, 0, 0x10, -ENODEV, 0x40000900, 0xffffffff, 0),
 	SYSC_QUIRK("cpgmac", 0, 0x1200, 0x1208, 0x1204, 0x4edb1902,
 		   0xffff00f0, 0),
-	SYSC_QUIRK("dcan", 0, 0x20, -1, -1, 0xa3170504, 0xffffffff, 0),
-	SYSC_QUIRK("dcan", 0, 0x20, -1, -1, 0x4edb1902, 0xffffffff, 0),
-	SYSC_QUIRK("dmic", 0, 0, 0x10, -1, 0x50010000, 0xffffffff, 0),
-	SYSC_QUIRK("dwc3", 0, 0, 0x10, -1, 0x500a0200, 0xffffffff, 0),
+	SYSC_QUIRK("dcan", 0, 0x20, -ENODEV, -ENODEV, 0xa3170504, 0xffffffff, 0),
+	SYSC_QUIRK("dcan", 0, 0x20, -ENODEV, -ENODEV, 0x4edb1902, 0xffffffff, 0),
+	SYSC_QUIRK("dispc", 0x4832a400, 0, 0x10, 0x14, 0x00000030, 0xffffffff, 0),
+	SYSC_QUIRK("dispc", 0x58001000, 0, 0x10, 0x14, 0x00000040, 0xffffffff, 0),
+	SYSC_QUIRK("dispc", 0x58001000, 0, 0x10, 0x14, 0x00000051, 0xffffffff, 0),
+	SYSC_QUIRK("dmic", 0, 0, 0x10, -ENODEV, 0x50010000, 0xffffffff, 0),
+	SYSC_QUIRK("dsi", 0x58004000, 0, 0x10, 0x14, 0x00000030, 0xffffffff, 0),
+	SYSC_QUIRK("dsi", 0x58005000, 0, 0x10, 0x14, 0x00000030, 0xffffffff, 0),
+	SYSC_QUIRK("dsi", 0x58005000, 0, 0x10, 0x14, 0x00000040, 0xffffffff, 0),
+	SYSC_QUIRK("dsi", 0x58009000, 0, 0x10, 0x14, 0x00000040, 0xffffffff, 0),
+	SYSC_QUIRK("dwc3", 0, 0, 0x10, -ENODEV, 0x500a0200, 0xffffffff, 0),
 	SYSC_QUIRK("d2d", 0x4a0b6000, 0, 0x10, 0x14, 0x00000010, 0xffffffff, 0),
 	SYSC_QUIRK("d2d", 0x4a0cd000, 0, 0x10, 0x14, 0x00000010, 0xffffffff, 0),
-	SYSC_QUIRK("epwmss", 0, 0, 0x4, -1, 0x47400001, 0xffffffff, 0),
-	SYSC_QUIRK("gpu", 0, 0x1fc00, 0x1fc10, -1, 0, 0, 0),
-	SYSC_QUIRK("gpu", 0, 0xfe00, 0xfe10, -1, 0x40000000 , 0xffffffff, 0),
+	SYSC_QUIRK("epwmss", 0, 0, 0x4, -ENODEV, 0x47400001, 0xffffffff, 0),
+	SYSC_QUIRK("gpu", 0, 0x1fc00, 0x1fc10, -ENODEV, 0, 0, 0),
+	SYSC_QUIRK("gpu", 0, 0xfe00, 0xfe10, -ENODEV, 0x40000000 , 0xffffffff, 0),
+	SYSC_QUIRK("hdmi", 0, 0, 0x10, -ENODEV, 0x50031d00, 0xffffffff, 0),
 	SYSC_QUIRK("hsi", 0, 0, 0x10, 0x14, 0x50043101, 0xffffffff, 0),
-	SYSC_QUIRK("iss", 0, 0, 0x10, -1, 0x40000101, 0xffffffff, 0),
-	SYSC_QUIRK("mcasp", 0, 0, 0x4, -1, 0x44306302, 0xffffffff, 0),
-	SYSC_QUIRK("mcasp", 0, 0, 0x4, -1, 0x44307b02, 0xffffffff, 0),
-	SYSC_QUIRK("mcbsp", 0, -1, 0x8c, -1, 0, 0, 0),
-	SYSC_QUIRK("mcspi", 0, 0, 0x10, -1, 0x40300a0b, 0xffff00ff, 0),
+	SYSC_QUIRK("iss", 0, 0, 0x10, -ENODEV, 0x40000101, 0xffffffff, 0),
+	SYSC_QUIRK("mcasp", 0, 0, 0x4, -ENODEV, 0x44306302, 0xffffffff, 0),
+	SYSC_QUIRK("mcasp", 0, 0, 0x4, -ENODEV, 0x44307b02, 0xffffffff, 0),
+	SYSC_QUIRK("mcbsp", 0, -ENODEV, 0x8c, -ENODEV, 0, 0, 0),
+	SYSC_QUIRK("mcspi", 0, 0, 0x10, -ENODEV, 0x40300a0b, 0xffff00ff, 0),
 	SYSC_QUIRK("mcspi", 0, 0, 0x110, 0x114, 0x40300a0b, 0xffffffff, 0),
-	SYSC_QUIRK("mailbox", 0, 0, 0x10, -1, 0x00000400, 0xffffffff, 0),
-	SYSC_QUIRK("m3", 0, 0, -1, -1, 0x5f580105, 0x0fff0f00, 0),
+	SYSC_QUIRK("mailbox", 0, 0, 0x10, -ENODEV, 0x00000400, 0xffffffff, 0),
+	SYSC_QUIRK("m3", 0, 0, -ENODEV, -ENODEV, 0x5f580105, 0x0fff0f00, 0),
 	SYSC_QUIRK("ocp2scp", 0, 0, 0x10, 0x14, 0x50060005, 0xfffffff0, 0),
-	SYSC_QUIRK("ocp2scp", 0, 0, -1, -1, 0x50060007, 0xffffffff, 0),
-	SYSC_QUIRK("padconf", 0, 0, 0x10, -1, 0x4fff0800, 0xffffffff, 0),
-	SYSC_QUIRK("padconf", 0, 0, -1, -1, 0x40001100, 0xffffffff, 0),
-	SYSC_QUIRK("prcm", 0, 0, -1, -1, 0x40000100, 0xffffffff, 0),
-	SYSC_QUIRK("prcm", 0, 0, -1, -1, 0x00004102, 0xffffffff, 0),
-	SYSC_QUIRK("prcm", 0, 0, -1, -1, 0x40000400, 0xffffffff, 0),
-	SYSC_QUIRK("scm", 0, 0, 0x10, -1, 0x40000900, 0xffffffff, 0),
-	SYSC_QUIRK("scm", 0, 0, -1, -1, 0x4e8b0100, 0xffffffff, 0),
-	SYSC_QUIRK("scm", 0, 0, -1, -1, 0x4f000100, 0xffffffff, 0),
-	SYSC_QUIRK("scm", 0, 0, -1, -1, 0x40000900, 0xffffffff, 0),
-	SYSC_QUIRK("scrm", 0, 0, -1, -1, 0x00000010, 0xffffffff, 0),
-	SYSC_QUIRK("sdio", 0, 0, 0x10, -1, 0x40202301, 0xffff0ff0, 0),
+	SYSC_QUIRK("ocp2scp", 0, 0, -ENODEV, -ENODEV, 0x50060007, 0xffffffff, 0),
+	SYSC_QUIRK("padconf", 0, 0, 0x10, -ENODEV, 0x4fff0800, 0xffffffff, 0),
+	SYSC_QUIRK("padconf", 0, 0, -ENODEV, -ENODEV, 0x40001100, 0xffffffff, 0),
+	SYSC_QUIRK("prcm", 0, 0, -ENODEV, -ENODEV, 0x40000100, 0xffffffff, 0),
+	SYSC_QUIRK("prcm", 0, 0, -ENODEV, -ENODEV, 0x00004102, 0xffffffff, 0),
+	SYSC_QUIRK("prcm", 0, 0, -ENODEV, -ENODEV, 0x40000400, 0xffffffff, 0),
+	SYSC_QUIRK("rfbi", 0x4832a800, 0, 0x10, 0x14, 0x00000010, 0xffffffff, 0),
+	SYSC_QUIRK("rfbi", 0x58002000, 0, 0x10, 0x14, 0x00000010, 0xffffffff, 0),
+	SYSC_QUIRK("scm", 0, 0, 0x10, -ENODEV, 0x40000900, 0xffffffff, 0),
+	SYSC_QUIRK("scm", 0, 0, -ENODEV, -ENODEV, 0x4e8b0100, 0xffffffff, 0),
+	SYSC_QUIRK("scm", 0, 0, -ENODEV, -ENODEV, 0x4f000100, 0xffffffff, 0),
+	SYSC_QUIRK("scm", 0, 0, -ENODEV, -ENODEV, 0x40000900, 0xffffffff, 0),
+	SYSC_QUIRK("scrm", 0, 0, -ENODEV, -ENODEV, 0x00000010, 0xffffffff, 0),
+	SYSC_QUIRK("sdio", 0, 0, 0x10, -ENODEV, 0x40202301, 0xffff0ff0, 0),
 	SYSC_QUIRK("sdio", 0, 0x2fc, 0x110, 0x114, 0x31010000, 0xffffffff, 0),
 	SYSC_QUIRK("sdma", 0, 0, 0x2c, 0x28, 0x00010900, 0xffffffff, 0),
-	SYSC_QUIRK("slimbus", 0, 0, 0x10, -1, 0x40000902, 0xffffffff, 0),
-	SYSC_QUIRK("slimbus", 0, 0, 0x10, -1, 0x40002903, 0xffffffff, 0),
-	SYSC_QUIRK("spinlock", 0, 0, 0x10, -1, 0x50020000, 0xffffffff, 0),
-	SYSC_QUIRK("rng", 0, 0x1fe0, 0x1fe4, -1, 0x00000020, 0xffffffff, 0),
-	SYSC_QUIRK("rtc", 0, 0x74, 0x78, -1, 0x4eb01908, 0xffff00f0, 0),
-	SYSC_QUIRK("timer32k", 0, 0, 0x4, -1, 0x00000060, 0xffffffff, 0),
+	SYSC_QUIRK("slimbus", 0, 0, 0x10, -ENODEV, 0x40000902, 0xffffffff, 0),
+	SYSC_QUIRK("slimbus", 0, 0, 0x10, -ENODEV, 0x40002903, 0xffffffff, 0),
+	SYSC_QUIRK("spinlock", 0, 0, 0x10, -ENODEV, 0x50020000, 0xffffffff, 0),
+	SYSC_QUIRK("rng", 0, 0x1fe0, 0x1fe4, -ENODEV, 0x00000020, 0xffffffff, 0),
+	SYSC_QUIRK("timer32k", 0, 0, 0x4, -ENODEV, 0x00000060, 0xffffffff, 0),
+	SYSC_QUIRK("tpcc", 0, 0, -ENODEV, -ENODEV, 0x40014c00, 0xffffffff, 0),
 	SYSC_QUIRK("usbhstll", 0, 0, 0x10, 0x14, 0x00000004, 0xffffffff, 0),
 	SYSC_QUIRK("usbhstll", 0, 0, 0x10, 0x14, 0x00000008, 0xffffffff, 0),
 	SYSC_QUIRK("usb_host_hs", 0, 0, 0x10, 0x14, 0x50700100, 0xffffffff, 0),
-	SYSC_QUIRK("usb_host_hs", 0, 0, 0x10, -1, 0x50700101, 0xffffffff, 0),
-	SYSC_QUIRK("vfpe", 0, 0, 0x104, -1, 0x4d001200, 0xffffffff, 0),
+	SYSC_QUIRK("usb_host_hs", 0, 0, 0x10, -ENODEV, 0x50700101, 0xffffffff, 0),
+	SYSC_QUIRK("venc", 0x58003000, 0, -ENODEV, -ENODEV, 0x00000002, 0xffffffff, 0),
+	SYSC_QUIRK("vfpe", 0, 0, 0x104, -ENODEV, 0x4d001200, 0xffffffff, 0),
 #endif
 };
 
@@ -1350,16 +1433,13 @@ static void sysc_init_early_quirks(struct sysc *ddata)
 		if (q->base != ddata->module_pa)
 			continue;
 
-		if (q->rev_offset >= 0 &&
-		    q->rev_offset != ddata->offsets[SYSC_REVISION])
+		if (q->rev_offset != ddata->offsets[SYSC_REVISION])
 			continue;
 
-		if (q->sysc_offset >= 0 &&
-		    q->sysc_offset != ddata->offsets[SYSC_SYSCONFIG])
+		if (q->sysc_offset != ddata->offsets[SYSC_SYSCONFIG])
 			continue;
 
-		if (q->syss_offset >= 0 &&
-		    q->syss_offset != ddata->offsets[SYSC_SYSSTATUS])
+		if (q->syss_offset != ddata->offsets[SYSC_SYSSTATUS])
 			continue;
 
 		ddata->name = q->name;
@@ -1379,16 +1459,13 @@ static void sysc_init_revision_quirks(struct sysc *ddata)
 		if (q->base && q->base != ddata->module_pa)
 			continue;
 
-		if (q->rev_offset >= 0 &&
-		    q->rev_offset != ddata->offsets[SYSC_REVISION])
+		if (q->rev_offset != ddata->offsets[SYSC_REVISION])
 			continue;
 
-		if (q->sysc_offset >= 0 &&
-		    q->sysc_offset != ddata->offsets[SYSC_SYSCONFIG])
+		if (q->sysc_offset != ddata->offsets[SYSC_SYSCONFIG])
 			continue;
 
-		if (q->syss_offset >= 0 &&
-		    q->syss_offset != ddata->offsets[SYSC_SYSSTATUS])
+		if (q->syss_offset != ddata->offsets[SYSC_SYSSTATUS])
 			continue;
 
 		if (q->revision == ddata->revision ||
@@ -1400,6 +1477,128 @@ static void sysc_init_revision_quirks(struct sysc *ddata)
 	}
 }
 
+/*
+ * DSS needs dispc outputs disabled to reset modules. Returns mask of
+ * enabled DSS interrupts. Eventually we may be able to do this on
+ * dispc init rather than top-level DSS init.
+ */
+static u32 sysc_quirk_dispc(struct sysc *ddata, int dispc_offset,
+			    bool disable)
+{
+	bool lcd_en, digit_en, lcd2_en = false, lcd3_en = false;
+	const int lcd_en_mask = BIT(0), digit_en_mask = BIT(1);
+	int manager_count;
+	bool framedonetv_irq;
+	u32 val, irq_mask = 0;
+
+	switch (sysc_soc->soc) {
+	case SOC_2420 ... SOC_3630:
+		manager_count = 2;
+		framedonetv_irq = false;
+		break;
+	case SOC_4430 ... SOC_4470:
+		manager_count = 3;
+		break;
+	case SOC_5430:
+	case SOC_DRA7:
+		manager_count = 4;
+		break;
+	case SOC_AM4:
+		manager_count = 1;
+		break;
+	case SOC_UNKNOWN:
+	default:
+		return 0;
+	};
+
+	/* Remap the whole module range to be able to reset dispc outputs */
+	devm_iounmap(ddata->dev, ddata->module_va);
+	ddata->module_va = devm_ioremap(ddata->dev,
+					ddata->module_pa,
+					ddata->module_size);
+	if (!ddata->module_va)
+		return -EIO;
+
+	/* DISP_CONTROL */
+	val = sysc_read(ddata, dispc_offset + 0x40);
+	lcd_en = val & lcd_en_mask;
+	digit_en = val & digit_en_mask;
+	if (lcd_en)
+		irq_mask |= BIT(0);			/* FRAMEDONE */
+	if (digit_en) {
+		if (framedonetv_irq)
+			irq_mask |= BIT(24);		/* FRAMEDONETV */
+		else
+			irq_mask |= BIT(2) | BIT(3);	/* EVSYNC bits */
+	}
+	if (disable & (lcd_en | digit_en))
+		sysc_write(ddata, dispc_offset + 0x40,
+			   val & ~(lcd_en_mask | digit_en_mask));
+
+	if (manager_count <= 2)
+		return irq_mask;
+
+	/* DISPC_CONTROL2 */
+	val = sysc_read(ddata, dispc_offset + 0x238);
+	lcd2_en = val & lcd_en_mask;
+	if (lcd2_en)
+		irq_mask |= BIT(22);			/* FRAMEDONE2 */
+	if (disable && lcd2_en)
+		sysc_write(ddata, dispc_offset + 0x238,
+			   val & ~lcd_en_mask);
+
+	if (manager_count <= 3)
+		return irq_mask;
+
+	/* DISPC_CONTROL3 */
+	val = sysc_read(ddata, dispc_offset + 0x848);
+	lcd3_en = val & lcd_en_mask;
+	if (lcd3_en)
+		irq_mask |= BIT(30);			/* FRAMEDONE3 */
+	if (disable && lcd3_en)
+		sysc_write(ddata, dispc_offset + 0x848,
+			   val & ~lcd_en_mask);
+
+	return irq_mask;
+}
+
+/* DSS needs child outputs disabled and SDI registers cleared for reset */
+static void sysc_pre_reset_quirk_dss(struct sysc *ddata)
+{
+	const int dispc_offset = 0x1000;
+	int error;
+	u32 irq_mask, val;
+
+	/* Get enabled outputs */
+	irq_mask = sysc_quirk_dispc(ddata, dispc_offset, false);
+	if (!irq_mask)
+		return;
+
+	/* Clear IRQSTATUS */
+	sysc_write(ddata, dispc_offset + 0x18, irq_mask);
+
+	/* Disable outputs */
+	val = sysc_quirk_dispc(ddata, dispc_offset, true);
+
+	/* Poll IRQSTATUS */
+	error = readl_poll_timeout(ddata->module_va + dispc_offset + 0x18,
+				   val, val != irq_mask, 100, 50);
+	if (error)
+		dev_warn(ddata->dev, "%s: timed out %08x !+ %08x\n",
+			 __func__, val, irq_mask);
+
+	if (sysc_soc->soc == SOC_3430) {
+		/* Clear DSS_SDI_CONTROL */
+		sysc_write(ddata, 0x44, 0);
+
+		/* Clear DSS_PLL_CONTROL */
+		sysc_write(ddata, 0x48, 0);
+	}
+
+	/* Clear DSS_CONTROL to switch DSS clock sources to PRCM if not */
+	sysc_write(ddata, 0x40, 0);
+}
+
 /* 1-wire needs module's internal clocks enabled for reset */
 static void sysc_pre_reset_quirk_hdq1w(struct sysc *ddata)
 {
@@ -1419,7 +1618,7 @@ static void sysc_module_enable_quirk_aess(struct sysc *ddata)
 	sysc_write(ddata, offset, 1);
 }
 
-/* I2C needs extra enable bit toggling for reset */
+/* I2C needs to be disabled for reset */
 static void sysc_clk_quirk_i2c(struct sysc *ddata, bool enable)
 {
 	int offset;
@@ -1440,14 +1639,48 @@ static void sysc_clk_quirk_i2c(struct sysc *ddata, bool enable)
 	sysc_write(ddata, offset, val);
 }
 
-static void sysc_clk_enable_quirk_i2c(struct sysc *ddata)
+static void sysc_pre_reset_quirk_i2c(struct sysc *ddata)
+{
+	sysc_clk_quirk_i2c(ddata, false);
+}
+
+static void sysc_post_reset_quirk_i2c(struct sysc *ddata)
 {
 	sysc_clk_quirk_i2c(ddata, true);
 }
 
-static void sysc_clk_disable_quirk_i2c(struct sysc *ddata)
+/* RTC on am3 and 4 needs to be unlocked and locked for sysconfig */
+static void sysc_quirk_rtc(struct sysc *ddata, bool lock)
 {
-	sysc_clk_quirk_i2c(ddata, false);
+	u32 val, kick0_val = 0, kick1_val = 0;
+	unsigned long flags;
+	int error;
+
+	if (!lock) {
+		kick0_val = 0x83e70b13;
+		kick1_val = 0x95a4f1e0;
+	}
+
+	local_irq_save(flags);
+	/* RTC_STATUS BUSY bit may stay active for 1/32768 seconds (~30 usec) */
+	error = readl_poll_timeout(ddata->module_va + 0x44, val,
+				   !(val & BIT(0)), 100, 50);
+	if (error)
+		dev_warn(ddata->dev, "rtc busy timeout\n");
+	/* Now we have ~15 microseconds to read/write various registers */
+	sysc_write(ddata, 0x6c, kick0_val);
+	sysc_write(ddata, 0x70, kick1_val);
+	local_irq_restore(flags);
+}
+
+static void sysc_module_unlock_quirk_rtc(struct sysc *ddata)
+{
+	sysc_quirk_rtc(ddata, false);
+}
+
+static void sysc_module_lock_quirk_rtc(struct sysc *ddata)
+{
+	sysc_quirk_rtc(ddata, true);
 }
 
 /* 36xx SGX needs a quirk for to bypass OCP IPG interrupt logic */
@@ -1483,20 +1716,30 @@ static void sysc_reset_done_quirk_wdt(struct sysc *ddata)
 		dev_warn(ddata->dev, "wdt disable step2 failed\n");
 }
 
+/* PRUSS needs to set MSTANDBY_INIT inorder to idle properly */
+static void sysc_module_disable_quirk_pruss(struct sysc *ddata)
+{
+	u32 reg;
+
+	reg = sysc_read(ddata, ddata->offsets[SYSC_SYSCONFIG]);
+	reg |= SYSC_PRUSS_STANDBY_INIT;
+	sysc_write(ddata, ddata->offsets[SYSC_SYSCONFIG], reg);
+}
+
 static void sysc_init_module_quirks(struct sysc *ddata)
 {
 	if (ddata->legacy_mode || !ddata->name)
 		return;
 
 	if (ddata->cfg.quirks & SYSC_MODULE_QUIRK_HDQ1W) {
-		ddata->clk_disable_quirk = sysc_pre_reset_quirk_hdq1w;
+		ddata->pre_reset_quirk = sysc_pre_reset_quirk_hdq1w;
 
 		return;
 	}
 
 	if (ddata->cfg.quirks & SYSC_MODULE_QUIRK_I2C) {
-		ddata->clk_enable_quirk = sysc_clk_enable_quirk_i2c;
-		ddata->clk_disable_quirk = sysc_clk_disable_quirk_i2c;
+		ddata->pre_reset_quirk = sysc_pre_reset_quirk_i2c;
+		ddata->post_reset_quirk = sysc_post_reset_quirk_i2c;
 
 		return;
 	}
@@ -1504,6 +1747,16 @@ static void sysc_init_module_quirks(struct sysc *ddata)
 	if (ddata->cfg.quirks & SYSC_MODULE_QUIRK_AESS)
 		ddata->module_enable_quirk = sysc_module_enable_quirk_aess;
 
+	if (ddata->cfg.quirks & SYSC_MODULE_QUIRK_DSS_RESET)
+		ddata->pre_reset_quirk = sysc_pre_reset_quirk_dss;
+
+	if (ddata->cfg.quirks & SYSC_MODULE_QUIRK_RTC_UNLOCK) {
+		ddata->module_unlock_quirk = sysc_module_unlock_quirk_rtc;
+		ddata->module_lock_quirk = sysc_module_lock_quirk_rtc;
+
+		return;
+	}
+
 	if (ddata->cfg.quirks & SYSC_MODULE_QUIRK_SGX)
 		ddata->module_enable_quirk = sysc_module_enable_quirk_sgx;
 
@@ -1511,6 +1764,9 @@ static void sysc_init_module_quirks(struct sysc *ddata)
 		ddata->reset_done_quirk = sysc_reset_done_quirk_wdt;
 		ddata->module_disable_quirk = sysc_reset_done_quirk_wdt;
 	}
+
+	if (ddata->cfg.quirks & SYSC_MODULE_QUIRK_PRUSS)
+		ddata->module_disable_quirk = sysc_module_disable_quirk_pruss;
 }
 
 static int sysc_clockdomain_init(struct sysc *ddata)
@@ -1572,7 +1828,7 @@ static int sysc_reset(struct sysc *ddata)
 	sysc_offset = ddata->offsets[SYSC_SYSCONFIG];
 	syss_offset = ddata->offsets[SYSC_SYSSTATUS];
 
-	if (ddata->legacy_mode || sysc_offset < 0 ||
+	if (ddata->legacy_mode ||
 	    ddata->cap->regbits->srst_shift < 0 ||
 	    ddata->cfg.quirks & SYSC_QUIRK_NO_RESET_ON_INIT)
 		return 0;
@@ -1584,19 +1840,21 @@ static int sysc_reset(struct sysc *ddata)
 	else
 		syss_done = ddata->cfg.syss_mask;
 
-	if (ddata->clk_disable_quirk)
-		ddata->clk_disable_quirk(ddata);
+	if (ddata->pre_reset_quirk)
+		ddata->pre_reset_quirk(ddata);
 
-	sysc_val = sysc_read_sysconfig(ddata);
-	sysc_val |= sysc_mask;
-	sysc_write(ddata, sysc_offset, sysc_val);
+	if (sysc_offset >= 0) {
+		sysc_val = sysc_read_sysconfig(ddata);
+		sysc_val |= sysc_mask;
+		sysc_write(ddata, sysc_offset, sysc_val);
+	}
 
 	if (ddata->cfg.srst_udelay)
 		usleep_range(ddata->cfg.srst_udelay,
 			     ddata->cfg.srst_udelay * 2);
 
-	if (ddata->clk_enable_quirk)
-		ddata->clk_enable_quirk(ddata);
+	if (ddata->post_reset_quirk)
+		ddata->post_reset_quirk(ddata);
 
 	/* Poll on reset status */
 	if (syss_offset >= 0) {
@@ -2314,6 +2572,16 @@ static const struct sysc_capabilities sysc_dra7_mcan = {
 	.mod_quirks = SYSS_QUIRK_RESETDONE_INVERTED,
 };
 
+/*
+ * PRUSS found on some AM33xx, AM437x and AM57xx SoCs
+ */
+static const struct sysc_capabilities sysc_pruss = {
+	.type = TI_SYSC_PRUSS,
+	.sysc_mask = SYSC_PRUSS_STANDBY_INIT | SYSC_PRUSS_SUB_MWAIT,
+	.regbits = &sysc_regbits_omap4_simple,
+	.mod_quirks = SYSC_MODULE_QUIRK_PRUSS,
+};
+
 static int sysc_init_pdata(struct sysc *ddata)
 {
 	struct ti_sysc_platform_data *pdata = dev_get_platdata(ddata->dev);
@@ -2387,6 +2655,154 @@ static void ti_sysc_idle(struct work_struct *work)
 		pm_runtime_put_sync(ddata->dev);
 }
 
+/*
+ * SoC model and features detection. Only needed for SoCs that need
+ * special handling for quirks, no need to list others.
+ */
+static const struct soc_device_attribute sysc_soc_match[] = {
+	SOC_FLAG("OMAP242*", SOC_2420),
+	SOC_FLAG("OMAP243*", SOC_2430),
+	SOC_FLAG("OMAP3[45]*", SOC_3430),
+	SOC_FLAG("OMAP3[67]*", SOC_3630),
+	SOC_FLAG("OMAP443*", SOC_4430),
+	SOC_FLAG("OMAP446*", SOC_4460),
+	SOC_FLAG("OMAP447*", SOC_4470),
+	SOC_FLAG("OMAP54*", SOC_5430),
+	SOC_FLAG("AM433", SOC_AM3),
+	SOC_FLAG("AM43*", SOC_AM4),
+	SOC_FLAG("DRA7*", SOC_DRA7),
+
+	{ /* sentinel */ },
+};
+
+/*
+ * List of SoCs variants with disabled features. By default we assume all
+ * devices in the device tree are available so no need to list those SoCs.
+ */
+static const struct soc_device_attribute sysc_soc_feat_match[] = {
+	/* OMAP3430/3530 and AM3517 variants with some accelerators disabled */
+	SOC_FLAG("AM3505", DIS_SGX),
+	SOC_FLAG("OMAP3525", DIS_SGX),
+	SOC_FLAG("OMAP3515", DIS_IVA | DIS_SGX),
+	SOC_FLAG("OMAP3503", DIS_ISP | DIS_IVA | DIS_SGX),
+
+	/* OMAP3630/DM3730 variants with some accelerators disabled */
+	SOC_FLAG("AM3703", DIS_IVA | DIS_SGX),
+	SOC_FLAG("DM3725", DIS_SGX),
+	SOC_FLAG("OMAP3611", DIS_ISP | DIS_IVA | DIS_SGX),
+	SOC_FLAG("OMAP3615/AM3715", DIS_IVA),
+	SOC_FLAG("OMAP3621", DIS_ISP),
+
+	{ /* sentinel */ },
+};
+
+static int sysc_add_disabled(unsigned long base)
+{
+	struct sysc_address *disabled_module;
+
+	disabled_module = kzalloc(sizeof(*disabled_module), GFP_KERNEL);
+	if (!disabled_module)
+		return -ENOMEM;
+
+	disabled_module->base = base;
+
+	mutex_lock(&sysc_soc->list_lock);
+	list_add(&disabled_module->node, &sysc_soc->disabled_modules);
+	mutex_unlock(&sysc_soc->list_lock);
+
+	return 0;
+}
+
+/*
+ * One time init to detect the booted SoC and disable unavailable features.
+ * Note that we initialize static data shared across all ti-sysc instances
+ * so ddata is only used for SoC type. This can be called from module_init
+ * once we no longer need to rely on platform data.
+ */
+static int sysc_init_soc(struct sysc *ddata)
+{
+	const struct soc_device_attribute *match;
+	struct ti_sysc_platform_data *pdata;
+	unsigned long features = 0;
+
+	if (sysc_soc)
+		return 0;
+
+	sysc_soc = kzalloc(sizeof(*sysc_soc), GFP_KERNEL);
+	if (!sysc_soc)
+		return -ENOMEM;
+
+	mutex_init(&sysc_soc->list_lock);
+	INIT_LIST_HEAD(&sysc_soc->disabled_modules);
+	sysc_soc->general_purpose = true;
+
+	pdata = dev_get_platdata(ddata->dev);
+	if (pdata && pdata->soc_type_gp)
+		sysc_soc->general_purpose = pdata->soc_type_gp();
+
+	match = soc_device_match(sysc_soc_match);
+	if (match && match->data)
+		sysc_soc->soc = (int)match->data;
+
+	match = soc_device_match(sysc_soc_feat_match);
+	if (!match)
+		return 0;
+
+	if (match->data)
+		features = (unsigned long)match->data;
+
+	/*
+	 * Add disabled devices to the list based on the module base.
+	 * Note that this must be done before we attempt to access the
+	 * device and have module revision checks working.
+	 */
+	if (features & DIS_ISP)
+		sysc_add_disabled(0x480bd400);
+	if (features & DIS_IVA)
+		sysc_add_disabled(0x5d000000);
+	if (features & DIS_SGX)
+		sysc_add_disabled(0x50000000);
+
+	return 0;
+}
+
+static void sysc_cleanup_soc(void)
+{
+	struct sysc_address *disabled_module;
+	struct list_head *pos, *tmp;
+
+	if (!sysc_soc)
+		return;
+
+	mutex_lock(&sysc_soc->list_lock);
+	list_for_each_safe(pos, tmp, &sysc_soc->disabled_modules) {
+		disabled_module = list_entry(pos, struct sysc_address, node);
+		list_del(pos);
+		kfree(disabled_module);
+	}
+	mutex_unlock(&sysc_soc->list_lock);
+}
+
+static int sysc_check_disabled_devices(struct sysc *ddata)
+{
+	struct sysc_address *disabled_module;
+	struct list_head *pos;
+	int error = 0;
+
+	mutex_lock(&sysc_soc->list_lock);
+	list_for_each(pos, &sysc_soc->disabled_modules) {
+		disabled_module = list_entry(pos, struct sysc_address, node);
+		if (ddata->module_pa == disabled_module->base) {
+			dev_dbg(ddata->dev, "module disabled for this SoC\n");
+			error = -ENODEV;
+			break;
+		}
+	}
+	mutex_unlock(&sysc_soc->list_lock);
+
+	return error;
+}
+
 static const struct of_device_id sysc_match_table[] = {
 	{ .compatible = "simple-bus", },
 	{ /* sentinel */ },
@@ -2405,6 +2821,10 @@ static int sysc_probe(struct platform_device *pdev)
 	ddata->dev = &pdev->dev;
 	platform_set_drvdata(pdev, ddata);
 
+	error = sysc_init_soc(ddata);
+	if (error)
+		return error;
+
 	error = sysc_init_match(ddata);
 	if (error)
 		return error;
@@ -2435,6 +2855,10 @@ static int sysc_probe(struct platform_device *pdev)
 
 	sysc_init_early_quirks(ddata);
 
+	error = sysc_check_disabled_devices(ddata);
+	if (error)
+		return error;
+
 	error = sysc_get_clocks(ddata);
 	if (error)
 		return error;
@@ -2539,6 +2963,7 @@ static const struct of_device_id sysc_match[] = {
 	{ .compatible = "ti,sysc-usb-host-fs",
 	  .data = &sysc_omap4_usb_host_fs, },
 	{ .compatible = "ti,sysc-dra7-mcan", .data = &sysc_dra7_mcan, },
+	{ .compatible = "ti,sysc-pruss", .data = &sysc_pruss, },
 	{  },
 };
 MODULE_DEVICE_TABLE(of, sysc_match);
@@ -2565,6 +2990,7 @@ static void __exit sysc_exit(void)
 {
 	bus_unregister_notifier(&platform_bus_type, &sysc_nb);
 	platform_driver_unregister(&sysc_driver);
+	sysc_cleanup_soc();
 }
 module_exit(sysc_exit);
 
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 26956c0..d4665fe 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -7,28 +7,6 @@
 
 source "drivers/tty/Kconfig"
 
-config DEVMEM
-	bool "/dev/mem virtual device support"
-	default y
-	help
-	  Say Y here if you want to support the /dev/mem device.
-	  The /dev/mem device is used to access areas of physical
-	  memory.
-	  When in doubt, say "Y".
-
-config DEVKMEM
-	bool "/dev/kmem virtual device support"
-	# On arm64, VMALLOC_START < PAGE_OFFSET, which confuses kmem read/write
-	depends on !ARM64
-	help
-	  Say Y here if you want to support the /dev/kmem device. The
-	  /dev/kmem device is rarely used, but can be used for certain
-	  kind of kernel debugging operations.
-	  When in doubt, say "N".
-
-source "drivers/tty/serial/Kconfig"
-source "drivers/tty/serdev/Kconfig"
-
 config TTY_PRINTK
 	tristate "TTY driver to output user messages via printk"
 	depends on EXPERT && TTY
@@ -113,8 +91,6 @@
 
 	  If unsure, say N.
 
-source "drivers/tty/hvc/Kconfig"
-
 config VIRTIO_CONSOLE
 	tristate "Virtio console"
 	depends on VIRTIO && TTY
@@ -220,89 +196,6 @@
 
 source "drivers/char/hw_random/Kconfig"
 
-config NVRAM
-	tristate "/dev/nvram support"
-	depends on X86 || HAVE_ARCH_NVRAM_OPS
-	default M68K || PPC
-	---help---
-	  If you say Y here and create a character special file /dev/nvram
-	  with major number 10 and minor number 144 using mknod ("man mknod"),
-	  you get read and write access to the non-volatile memory.
-
-	  /dev/nvram may be used to view settings in NVRAM or to change them
-	  (with some utility). It could also be used to frequently
-	  save a few bits of very important data that may not be lost over
-	  power-off and for which writing to disk is too insecure. Note
-	  however that most NVRAM space in a PC belongs to the BIOS and you
-	  should NEVER idly tamper with it. See Ralf Brown's interrupt list
-	  for a guide to the use of CMOS bytes by your BIOS.
-
-	  This memory is conventionally called "NVRAM" on PowerPC machines,
-	  "CMOS RAM" on PCs, "NVRAM" on Ataris and "PRAM" on Macintoshes.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called nvram.
-
-#
-# These legacy RTC drivers just cause too many conflicts with the generic
-# RTC framework ... let's not even try to coexist any more.
-#
-if RTC_LIB=n
-
-config RTC
-	tristate "Enhanced Real Time Clock Support (legacy PC RTC driver)"
-	depends on ALPHA
-	---help---
-	  If you say Y here and create a character special file /dev/rtc with
-	  major number 10 and minor number 135 using mknod ("man mknod"), you
-	  will get access to the real time clock (or hardware clock) built
-	  into your computer.
-
-	  Every PC has such a clock built in. It can be used to generate
-	  signals from as low as 1Hz up to 8192Hz, and can also be used
-	  as a 24 hour alarm. It reports status information via the file
-	  /proc/driver/rtc and its behaviour is set by various ioctls on
-	  /dev/rtc.
-
-	  If you run Linux on a multiprocessor machine and said Y to
-	  "Symmetric Multi Processing" above, you should say Y here to read
-	  and set the RTC in an SMP compatible fashion.
-
-	  If you think you have a use for such a device (such as periodic data
-	  sampling), then say Y here, and read <file:Documentation/admin-guide/rtc.rst>
-	  for details.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called rtc.
-
-config JS_RTC
-	tristate "Enhanced Real Time Clock Support"
-	depends on SPARC32 && PCI
-	---help---
-	  If you say Y here and create a character special file /dev/rtc with
-	  major number 10 and minor number 135 using mknod ("man mknod"), you
-	  will get access to the real time clock (or hardware clock) built
-	  into your computer.
-
-	  Every PC has such a clock built in. It can be used to generate
-	  signals from as low as 1Hz up to 8192Hz, and can also be used
-	  as a 24 hour alarm. It reports status information via the file
-	  /proc/driver/rtc and its behaviour is set by various ioctls on
-	  /dev/rtc.
-
-	  If you think you have a use for such a device (such as periodic data
-	  sampling), then say Y here, and read <file:Documentation/admin-guide/rtc.rst>
-	  for details.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called js-rtc.
-
-config EFI_RTC
-	bool "EFI Real Time Clock Services"
-	depends on IA64
-
-endif # RTC_LIB
-
 config DTLK
 	tristate "Double Talk PC internal speech card support"
 	depends on ISA
@@ -431,6 +324,48 @@
 	  pc8736x_gpio drivers.  If those drivers are built as
 	  modules, this one will be too, named nsc_gpio
 
+config DEVMEM
+	bool "/dev/mem virtual device support"
+	default y
+	help
+	  Say Y here if you want to support the /dev/mem device.
+	  The /dev/mem device is used to access areas of physical
+	  memory.
+	  When in doubt, say "Y".
+
+config DEVKMEM
+	bool "/dev/kmem virtual device support"
+	# On arm64, VMALLOC_START < PAGE_OFFSET, which confuses kmem read/write
+	depends on !ARM64
+	help
+	  Say Y here if you want to support the /dev/kmem device. The
+	  /dev/kmem device is rarely used, but can be used for certain
+	  kind of kernel debugging operations.
+	  When in doubt, say "N".
+
+config NVRAM
+	tristate "/dev/nvram support"
+	depends on X86 || HAVE_ARCH_NVRAM_OPS
+	default M68K || PPC
+	---help---
+	  If you say Y here and create a character special file /dev/nvram
+	  with major number 10 and minor number 144 using mknod ("man mknod"),
+	  you get read and write access to the non-volatile memory.
+
+	  /dev/nvram may be used to view settings in NVRAM or to change them
+	  (with some utility). It could also be used to frequently
+	  save a few bits of very important data that may not be lost over
+	  power-off and for which writing to disk is too insecure. Note
+	  however that most NVRAM space in a PC belongs to the BIOS and you
+	  should NEVER idly tamper with it. See Ralf Brown's interrupt list
+	  for a guide to the use of CMOS bytes by your BIOS.
+
+	  This memory is conventionally called "NVRAM" on PowerPC machines,
+	  "CMOS RAM" on PCs, "NVRAM" on Ataris and "PRAM" on Macintoshes.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called nvram.
+
 config RAW_DRIVER
 	tristate "RAW driver (/dev/raw/rawN)"
 	depends on BLOCK
@@ -452,6 +387,14 @@
 	  Default is 256. Increase this number in case you need lots of
 	  raw devices.
 
+config DEVPORT
+	bool "/dev/port character device"
+	depends on ISA || PCI
+	default y
+	help
+	  Say Y here if you want to support the /dev/port device. The /dev/port
+	  device is similar to /dev/mem, but for I/O ports.
+
 config HPET
 	bool "HPET - High Precision Event Timer" if (X86 || IA64)
 	default n
@@ -511,14 +454,6 @@
 	  /sys/devices/platform/telco_clock, with a number of files for
 	  controlling the behavior of this hardware.
 
-config DEVPORT
-	bool "/dev/port character device"
-	depends on ISA || PCI
-	default y
-	help
-	  Say Y here if you want to support the /dev/port device. The /dev/port
-	  device is similar to /dev/mem, but for I/O ports.
-
 source "drivers/s390/char/Kconfig"
 
 source "drivers/char/xillybus/Kconfig"
@@ -539,7 +474,7 @@
 
 config RANDOM_TRUST_CPU
 	bool "Trust the CPU manufacturer to initialize Linux's CRNG"
-	depends on X86 || S390 || PPC
+	depends on ARCH_RANDOM
 	default n
 	help
 	Assume that CPU manufacturer (e.g., Intel or AMD for RDSEED or
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 7c5ea6f..ffce287 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -20,9 +20,7 @@
 obj-$(CONFIG_DTLK)		+= dtlk.o
 obj-$(CONFIG_APPLICOM)		+= applicom.o
 obj-$(CONFIG_SONYPI)		+= sonypi.o
-obj-$(CONFIG_RTC)		+= rtc.o
 obj-$(CONFIG_HPET)		+= hpet.o
-obj-$(CONFIG_EFI_RTC)		+= efirtc.o
 obj-$(CONFIG_XILINX_HWICAP)	+= xilinx_hwicap/
 obj-$(CONFIG_NVRAM)		+= nvram.o
 obj-$(CONFIG_TOSHIBA)		+= toshiba.o
@@ -46,9 +44,6 @@
 
 obj-$(CONFIG_PS3_FLASH)		+= ps3flash.o
 
-obj-$(CONFIG_JS_RTC)		+= js-rtc.o
-js-rtc-y = rtc.o
-
 obj-$(CONFIG_XILLYBUS)		+= xillybus/
 obj-$(CONFIG_POWERNV_OP_PANEL)	+= powernv-op-panel.o
 obj-$(CONFIG_ADI)		+= adi.o
diff --git a/drivers/char/applicom.c b/drivers/char/applicom.c
index 51121a4..14b2d80 100644
--- a/drivers/char/applicom.c
+++ b/drivers/char/applicom.c
@@ -53,7 +53,6 @@
 #define MAX_BOARD 8		/* maximum of pc board possible */
 #define MAX_ISA_BOARD 4
 #define LEN_RAM_IO 0x800
-#define AC_MINOR 157
 
 #ifndef PCI_VENDOR_ID_APPLICOM
 #define PCI_VENDOR_ID_APPLICOM                0x1389
diff --git a/drivers/char/efirtc.c b/drivers/char/efirtc.c
deleted file mode 100644
index 4f73064..0000000
--- a/drivers/char/efirtc.c
+++ /dev/null
@@ -1,366 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * EFI Time Services Driver for Linux
- *
- * Copyright (C) 1999 Hewlett-Packard Co
- * Copyright (C) 1999 Stephane Eranian <eranian@hpl.hp.com>
- *
- * Based on skeleton from the drivers/char/rtc.c driver by P. Gortmaker
- *
- * This code provides an architected & portable interface to the real time
- * clock by using EFI instead of direct bit fiddling. The functionalities are 
- * quite different from the rtc.c driver. The only way to talk to the device 
- * is by using ioctl(). There is a /proc interface which provides the raw 
- * information.
- *
- * Please note that we have kept the API as close as possible to the
- * legacy RTC. The standard /sbin/hwclock program should work normally 
- * when used to get/set the time.
- *
- * NOTES:
- *	- Locking is required for safe execution of EFI calls with regards
- *	  to interrupts and SMP.
- *
- * TODO (December 1999):
- * 	- provide the API to set/get the WakeUp Alarm (different from the
- *	  rtc.c alarm).
- *	- SMP testing
- * 	- Add module support
- */
-
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/miscdevice.h>
-#include <linux/init.h>
-#include <linux/rtc.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/efi.h>
-#include <linux/uaccess.h>
-
-
-#define EFI_RTC_VERSION		"0.4"
-
-#define EFI_ISDST (EFI_TIME_ADJUST_DAYLIGHT|EFI_TIME_IN_DAYLIGHT)
-/*
- * EFI Epoch is 1/1/1998
- */
-#define EFI_RTC_EPOCH		1998
-
-static DEFINE_SPINLOCK(efi_rtc_lock);
-
-static long efi_rtc_ioctl(struct file *file, unsigned int cmd,
-							unsigned long arg);
-
-#define is_leap(year) \
-          ((year) % 4 == 0 && ((year) % 100 != 0 || (year) % 400 == 0))
-
-static const unsigned short int __mon_yday[2][13] =
-{
-	/* Normal years.  */
-	{ 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334, 365 },
-	/* Leap years.  */  
-	{ 0, 31, 60, 91, 121, 152, 182, 213, 244, 274, 305, 335, 366 }
-};
-
-/*
- * returns day of the year [0-365]
- */
-static inline int
-compute_yday(efi_time_t *eft)
-{
-	/* efi_time_t.month is in the [1-12] so, we need -1 */
-	return  __mon_yday[is_leap(eft->year)][eft->month-1]+ eft->day -1;
-}
-/*
- * returns day of the week [0-6] 0=Sunday
- *
- * Don't try to provide a year that's before 1998, please !
- */
-static int
-compute_wday(efi_time_t *eft)
-{
-	int y;
-	int ndays = 0;
-
-	if ( eft->year < 1998 ) {
-		printk(KERN_ERR "efirtc: EFI year < 1998, invalid date\n");
-		return -1;
-	}
-
-	for(y=EFI_RTC_EPOCH; y < eft->year; y++ ) {
-		ndays += 365 + (is_leap(y) ? 1 : 0);
-	}
-	ndays += compute_yday(eft);
-
-	/*
-	 * 4=1/1/1998 was a Thursday
-	 */
-	return (ndays + 4) % 7;
-}
-
-static void
-convert_to_efi_time(struct rtc_time *wtime, efi_time_t *eft)
-{
-
-	eft->year	= wtime->tm_year + 1900;
-	eft->month	= wtime->tm_mon + 1; 
-	eft->day	= wtime->tm_mday;
-	eft->hour	= wtime->tm_hour;
-	eft->minute	= wtime->tm_min;
-	eft->second 	= wtime->tm_sec;
-	eft->nanosecond = 0; 
-	eft->daylight	= wtime->tm_isdst ? EFI_ISDST: 0;
-	eft->timezone	= EFI_UNSPECIFIED_TIMEZONE;
-}
-
-static void
-convert_from_efi_time(efi_time_t *eft, struct rtc_time *wtime)
-{
-	memset(wtime, 0, sizeof(*wtime));
-	wtime->tm_sec  = eft->second;
-	wtime->tm_min  = eft->minute;
-	wtime->tm_hour = eft->hour;
-	wtime->tm_mday = eft->day;
-	wtime->tm_mon  = eft->month - 1;
-	wtime->tm_year = eft->year - 1900;
-
-	/* day of the week [0-6], Sunday=0 */
-	wtime->tm_wday = compute_wday(eft);
-
-	/* day in the year [1-365]*/
-	wtime->tm_yday = compute_yday(eft);
-
-
-	switch (eft->daylight & EFI_ISDST) {
-		case EFI_ISDST:
-			wtime->tm_isdst = 1;
-			break;
-		case EFI_TIME_ADJUST_DAYLIGHT:
-			wtime->tm_isdst = 0;
-			break;
-		default:
-			wtime->tm_isdst = -1;
-	}
-}
-
-static long efi_rtc_ioctl(struct file *file, unsigned int cmd,
-							unsigned long arg)
-{
-
-	efi_status_t	status;
-	unsigned long	flags;
-	efi_time_t	eft;
-	efi_time_cap_t	cap;
-	struct rtc_time	wtime;
-	struct rtc_wkalrm __user *ewp;
-	unsigned char	enabled, pending;
-
-	switch (cmd) {
-		case RTC_UIE_ON:
-		case RTC_UIE_OFF:
-		case RTC_PIE_ON:
-		case RTC_PIE_OFF:
-		case RTC_AIE_ON:
-		case RTC_AIE_OFF:
-		case RTC_ALM_SET:
-		case RTC_ALM_READ:
-		case RTC_IRQP_READ:
-		case RTC_IRQP_SET:
-		case RTC_EPOCH_READ:
-		case RTC_EPOCH_SET:
-			return -EINVAL;
-
-		case RTC_RD_TIME:
-			spin_lock_irqsave(&efi_rtc_lock, flags);
-
-			status = efi.get_time(&eft, &cap);
-
-			spin_unlock_irqrestore(&efi_rtc_lock,flags);
-
-			if (status != EFI_SUCCESS) {
-				/* should never happen */
-				printk(KERN_ERR "efitime: can't read time\n");
-				return -EINVAL;
-			}
-
-			convert_from_efi_time(&eft, &wtime);
-
- 			return copy_to_user((void __user *)arg, &wtime,
-					    sizeof (struct rtc_time)) ? - EFAULT : 0;
-
-		case RTC_SET_TIME:
-
-			if (!capable(CAP_SYS_TIME)) return -EACCES;
-
-			if (copy_from_user(&wtime, (struct rtc_time __user *)arg,
-					   sizeof(struct rtc_time)) )
-				return -EFAULT;
-
-			convert_to_efi_time(&wtime, &eft);
-
-			spin_lock_irqsave(&efi_rtc_lock, flags);
-
-			status = efi.set_time(&eft);
-
-			spin_unlock_irqrestore(&efi_rtc_lock,flags);
-
-			return status == EFI_SUCCESS ? 0 : -EINVAL;
-
-		case RTC_WKALM_SET:
-
-			if (!capable(CAP_SYS_TIME)) return -EACCES;
-
-			ewp = (struct rtc_wkalrm __user *)arg;
-
-			if (  get_user(enabled, &ewp->enabled)
-			   || copy_from_user(&wtime, &ewp->time, sizeof(struct rtc_time)) )
-				return -EFAULT;
-
-			convert_to_efi_time(&wtime, &eft);
-
-			spin_lock_irqsave(&efi_rtc_lock, flags);
-			/*
-			 * XXX Fixme:
-			 * As of EFI 0.92 with the firmware I have on my
-			 * machine this call does not seem to work quite
-			 * right
-			 */
-			status = efi.set_wakeup_time((efi_bool_t)enabled, &eft);
-
-			spin_unlock_irqrestore(&efi_rtc_lock,flags);
-
-			return status == EFI_SUCCESS ? 0 : -EINVAL;
-
-		case RTC_WKALM_RD:
-
-			spin_lock_irqsave(&efi_rtc_lock, flags);
-
-			status = efi.get_wakeup_time((efi_bool_t *)&enabled, (efi_bool_t *)&pending, &eft);
-
-			spin_unlock_irqrestore(&efi_rtc_lock,flags);
-
-			if (status != EFI_SUCCESS) return -EINVAL;
-
-			ewp = (struct rtc_wkalrm __user *)arg;
-
-			if (  put_user(enabled, &ewp->enabled)
-			   || put_user(pending, &ewp->pending)) return -EFAULT;
-
-			convert_from_efi_time(&eft, &wtime);
-
-			return copy_to_user(&ewp->time, &wtime,
-					    sizeof(struct rtc_time)) ? -EFAULT : 0;
-	}
-	return -ENOTTY;
-}
-
-/*
- *	The various file operations we support.
- */
-
-static const struct file_operations efi_rtc_fops = {
-	.owner		= THIS_MODULE,
-	.unlocked_ioctl	= efi_rtc_ioctl,
-	.llseek		= no_llseek,
-};
-
-static struct miscdevice efi_rtc_dev= {
-	EFI_RTC_MINOR,
-	"efirtc",
-	&efi_rtc_fops
-};
-
-/*
- *	We export RAW EFI information to /proc/driver/efirtc
- */
-static int efi_rtc_proc_show(struct seq_file *m, void *v)
-{
-	efi_time_t 	eft, alm;
-	efi_time_cap_t	cap;
-	efi_bool_t	enabled, pending;	
-	unsigned long	flags;
-
-	memset(&eft, 0, sizeof(eft));
-	memset(&alm, 0, sizeof(alm));
-	memset(&cap, 0, sizeof(cap));
-
-	spin_lock_irqsave(&efi_rtc_lock, flags);
-
-	efi.get_time(&eft, &cap);
-	efi.get_wakeup_time(&enabled, &pending, &alm);
-
-	spin_unlock_irqrestore(&efi_rtc_lock,flags);
-
-	seq_printf(m,
-		   "Time           : %u:%u:%u.%09u\n"
-		   "Date           : %u-%u-%u\n"
-		   "Daylight       : %u\n",
-		   eft.hour, eft.minute, eft.second, eft.nanosecond, 
-		   eft.year, eft.month, eft.day,
-		   eft.daylight);
-
-	if (eft.timezone == EFI_UNSPECIFIED_TIMEZONE)
-		seq_puts(m, "Timezone       : unspecified\n");
-	else
-		/* XXX fixme: convert to string? */
-		seq_printf(m, "Timezone       : %u\n", eft.timezone);
-		
-
-	seq_printf(m,
-		   "Alarm Time     : %u:%u:%u.%09u\n"
-		   "Alarm Date     : %u-%u-%u\n"
-		   "Alarm Daylight : %u\n"
-		   "Enabled        : %s\n"
-		   "Pending        : %s\n",
-		   alm.hour, alm.minute, alm.second, alm.nanosecond, 
-		   alm.year, alm.month, alm.day, 
-		   alm.daylight,
-		   enabled == 1 ? "yes" : "no",
-		   pending == 1 ? "yes" : "no");
-
-	if (eft.timezone == EFI_UNSPECIFIED_TIMEZONE)
-		seq_puts(m, "Timezone       : unspecified\n");
-	else
-		/* XXX fixme: convert to string? */
-		seq_printf(m, "Timezone       : %u\n", alm.timezone);
-
-	/*
-	 * now prints the capabilities
-	 */
-	seq_printf(m,
-		   "Resolution     : %u\n"
-		   "Accuracy       : %u\n"
-		   "SetstoZero     : %u\n",
-		   cap.resolution, cap.accuracy, cap.sets_to_zero);
-
-	return 0;
-}
-static int __init 
-efi_rtc_init(void)
-{
-	int ret;
-	struct proc_dir_entry *dir;
-
-	printk(KERN_INFO "EFI Time Services Driver v%s\n", EFI_RTC_VERSION);
-
-	ret = misc_register(&efi_rtc_dev);
-	if (ret) {
-		printk(KERN_ERR "efirtc: can't misc_register on minor=%d\n",
-				EFI_RTC_MINOR);
-		return ret;
-	}
-
-	dir = proc_create_single("driver/efirtc", 0, NULL, efi_rtc_proc_show);
-	if (dir == NULL) {
-		printk(KERN_ERR "efirtc: can't create /proc/driver/efirtc.\n");
-		misc_deregister(&efi_rtc_dev);
-		return -1;
-	}
-	return 0;
-}
-device_initcall(efi_rtc_init);
-
-/*
-MODULE_LICENSE("GPL");
-*/
diff --git a/drivers/char/hw_random/omap3-rom-rng.c b/drivers/char/hw_random/omap3-rom-rng.c
index a431c5c..e0d77fa 100644
--- a/drivers/char/hw_random/omap3-rom-rng.c
+++ b/drivers/char/hw_random/omap3-rom-rng.c
@@ -4,7 +4,7 @@
  * Copyright (C) 2009 Nokia Corporation
  * Author: Juha Yrjola <juha.yrjola@solidboot.com>
  *
- * Copyright (C) 2013 Pali Rohár <pali.rohar@gmail.com>
+ * Copyright (C) 2013 Pali Rohár <pali@kernel.org>
  *
  * This file is licensed under  the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
@@ -178,5 +178,5 @@ module_platform_driver(omap3_rom_rng_driver);
 
 MODULE_ALIAS("platform:omap3-rom-rng");
 MODULE_AUTHOR("Juha Yrjola");
-MODULE_AUTHOR("Pali Rohár <pali.rohar@gmail.com>");
+MODULE_AUTHOR("Pali Rohár <pali@kernel.org>");
 MODULE_LICENSE("GPL");
diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
index cad9563..c48d8f0 100644
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -618,6 +618,8 @@ static DEFINE_MUTEX(ipmidriver_mutex);
 
 static LIST_HEAD(ipmi_interfaces);
 static DEFINE_MUTEX(ipmi_interfaces_mutex);
+#define ipmi_interfaces_mutex_held() \
+	lockdep_is_held(&ipmi_interfaces_mutex)
 static struct srcu_struct ipmi_interfaces_srcu;
 
 /*
@@ -1321,7 +1323,8 @@ static void _ipmi_destroy_user(struct ipmi_user *user)
 	 * synchronize_srcu()) then free everything in that list.
 	 */
 	mutex_lock(&intf->cmd_rcvrs_mutex);
-	list_for_each_entry_rcu(rcvr, &intf->cmd_rcvrs, link) {
+	list_for_each_entry_rcu(rcvr, &intf->cmd_rcvrs, link,
+				lockdep_is_held(&intf->cmd_rcvrs_mutex)) {
 		if (rcvr->user == user) {
 			list_del_rcu(&rcvr->link);
 			rcvr->next = rcvrs;
@@ -1599,7 +1602,8 @@ static struct cmd_rcvr *find_cmd_rcvr(struct ipmi_smi *intf,
 {
 	struct cmd_rcvr *rcvr;
 
-	list_for_each_entry_rcu(rcvr, &intf->cmd_rcvrs, link) {
+	list_for_each_entry_rcu(rcvr, &intf->cmd_rcvrs, link,
+				lockdep_is_held(&intf->cmd_rcvrs_mutex)) {
 		if ((rcvr->netfn == netfn) && (rcvr->cmd == cmd)
 					&& (rcvr->chans & (1 << chan)))
 			return rcvr;
@@ -1614,7 +1618,8 @@ static int is_cmd_rcvr_exclusive(struct ipmi_smi *intf,
 {
 	struct cmd_rcvr *rcvr;
 
-	list_for_each_entry_rcu(rcvr, &intf->cmd_rcvrs, link) {
+	list_for_each_entry_rcu(rcvr, &intf->cmd_rcvrs, link,
+				lockdep_is_held(&intf->cmd_rcvrs_mutex)) {
 		if ((rcvr->netfn == netfn) && (rcvr->cmd == cmd)
 					&& (rcvr->chans & chans))
 			return 0;
@@ -3188,8 +3193,8 @@ static void __get_guid(struct ipmi_smi *intf)
 	if (rv)
 		/* Send failed, no GUID available. */
 		bmc->dyn_guid_set = 0;
-
-	wait_event(intf->waitq, bmc->dyn_guid_set != 2);
+	else
+		wait_event(intf->waitq, bmc->dyn_guid_set != 2);
 
 	/* dyn_guid_set makes the guid data available. */
 	smp_rmb();
@@ -3450,7 +3455,8 @@ int ipmi_add_smi(struct module         *owner,
 	/* Look for a hole in the numbers. */
 	i = 0;
 	link = &ipmi_interfaces;
-	list_for_each_entry_rcu(tintf, &ipmi_interfaces, link) {
+	list_for_each_entry_rcu(tintf, &ipmi_interfaces, link,
+				ipmi_interfaces_mutex_held()) {
 		if (tintf->intf_num != i) {
 			link = &tintf->link;
 			break;
diff --git a/drivers/char/ipmi/ipmi_ssif.c b/drivers/char/ipmi/ipmi_ssif.c
index 8ac390c..b7145f3 100644
--- a/drivers/char/ipmi/ipmi_ssif.c
+++ b/drivers/char/ipmi/ipmi_ssif.c
@@ -313,6 +313,7 @@ static int start_send(struct ssif_info *ssif_info,
 
 static unsigned long *ipmi_ssif_lock_cond(struct ssif_info *ssif_info,
 					  unsigned long *flags)
+	__acquires(&ssif_info->lock)
 {
 	spin_lock_irqsave(&ssif_info->lock, *flags);
 	return flags;
@@ -320,6 +321,7 @@ static unsigned long *ipmi_ssif_lock_cond(struct ssif_info *ssif_info,
 
 static void ipmi_ssif_unlock_cond(struct ssif_info *ssif_info,
 				  unsigned long *flags)
+	__releases(&ssif_info->lock)
 {
 	spin_unlock_irqrestore(&ssif_info->lock, *flags);
 }
diff --git a/drivers/char/ipmi/kcs_bmc_aspeed.c b/drivers/char/ipmi/kcs_bmc_aspeed.c
index 3c95594..a140203 100644
--- a/drivers/char/ipmi/kcs_bmc_aspeed.c
+++ b/drivers/char/ipmi/kcs_bmc_aspeed.c
@@ -12,6 +12,7 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/platform_device.h>
 #include <linux/poll.h>
 #include <linux/regmap.h>
@@ -233,58 +234,154 @@ static const struct kcs_ioreg ast_kcs_bmc_ioregs[KCS_CHANNEL_MAX] = {
 	{ .idr = LPC_IDR4, .odr = LPC_ODR4, .str = LPC_STR4 },
 };
 
+static struct kcs_bmc *aspeed_kcs_probe_of_v1(struct platform_device *pdev)
+{
+	struct aspeed_kcs_bmc *priv;
+	struct device_node *np;
+	struct kcs_bmc *kcs;
+	u32 channel;
+	u32 slave;
+	int rc;
+
+	np = pdev->dev.of_node;
+
+	rc = of_property_read_u32(np, "kcs_chan", &channel);
+	if ((rc != 0) || (channel == 0 || channel > KCS_CHANNEL_MAX)) {
+		dev_err(&pdev->dev, "no valid 'kcs_chan' configured\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	kcs = kcs_bmc_alloc(&pdev->dev, sizeof(struct aspeed_kcs_bmc), channel);
+	if (!kcs)
+		return ERR_PTR(-ENOMEM);
+
+	priv = kcs_bmc_priv(kcs);
+	priv->map = syscon_node_to_regmap(pdev->dev.parent->of_node);
+	if (IS_ERR(priv->map)) {
+		dev_err(&pdev->dev, "Couldn't get regmap\n");
+		return ERR_PTR(-ENODEV);
+	}
+
+	rc = of_property_read_u32(np, "kcs_addr", &slave);
+	if (rc) {
+		dev_err(&pdev->dev, "no valid 'kcs_addr' configured\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	kcs->ioreg = ast_kcs_bmc_ioregs[channel - 1];
+	aspeed_kcs_set_address(kcs, slave);
+
+	return kcs;
+}
+
+static int aspeed_kcs_calculate_channel(const struct kcs_ioreg *regs)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ast_kcs_bmc_ioregs); i++) {
+		if (!memcmp(&ast_kcs_bmc_ioregs[i], regs, sizeof(*regs)))
+			return i + 1;
+	}
+
+	return -EINVAL;
+}
+
+static struct kcs_bmc *aspeed_kcs_probe_of_v2(struct platform_device *pdev)
+{
+	struct aspeed_kcs_bmc *priv;
+	struct device_node *np;
+	struct kcs_ioreg ioreg;
+	struct kcs_bmc *kcs;
+	const __be32 *reg;
+	int channel;
+	u32 slave;
+	int rc;
+
+	np = pdev->dev.of_node;
+
+	/* Don't translate addresses, we want offsets for the regmaps */
+	reg = of_get_address(np, 0, NULL, NULL);
+	if (!reg)
+		return ERR_PTR(-EINVAL);
+	ioreg.idr = be32_to_cpup(reg);
+
+	reg = of_get_address(np, 1, NULL, NULL);
+	if (!reg)
+		return ERR_PTR(-EINVAL);
+	ioreg.odr = be32_to_cpup(reg);
+
+	reg = of_get_address(np, 2, NULL, NULL);
+	if (!reg)
+		return ERR_PTR(-EINVAL);
+	ioreg.str = be32_to_cpup(reg);
+
+	channel = aspeed_kcs_calculate_channel(&ioreg);
+	if (channel < 0)
+		return ERR_PTR(channel);
+
+	kcs = kcs_bmc_alloc(&pdev->dev, sizeof(struct aspeed_kcs_bmc), channel);
+	if (!kcs)
+		return ERR_PTR(-ENOMEM);
+
+	kcs->ioreg = ioreg;
+
+	priv = kcs_bmc_priv(kcs);
+	priv->map = syscon_node_to_regmap(pdev->dev.parent->of_node);
+	if (IS_ERR(priv->map)) {
+		dev_err(&pdev->dev, "Couldn't get regmap\n");
+		return ERR_PTR(-ENODEV);
+	}
+
+	rc = of_property_read_u32(np, "aspeed,lpc-io-reg", &slave);
+	if (rc)
+		return ERR_PTR(rc);
+
+	aspeed_kcs_set_address(kcs, slave);
+
+	return kcs;
+}
+
 static int aspeed_kcs_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct aspeed_kcs_bmc *priv;
 	struct kcs_bmc *kcs_bmc;
-	u32 chan, addr;
+	struct device_node *np;
 	int rc;
 
-	rc = of_property_read_u32(dev->of_node, "kcs_chan", &chan);
-	if ((rc != 0) || (chan == 0 || chan > KCS_CHANNEL_MAX)) {
-		dev_err(dev, "no valid 'kcs_chan' configured\n");
-		return -ENODEV;
-	}
+	np = pdev->dev.of_node;
+	if (of_device_is_compatible(np, "aspeed,ast2400-kcs-bmc") ||
+			of_device_is_compatible(np, "aspeed,ast2500-kcs-bmc"))
+		kcs_bmc = aspeed_kcs_probe_of_v1(pdev);
+	else if (of_device_is_compatible(np, "aspeed,ast2400-kcs-bmc-v2") ||
+			of_device_is_compatible(np, "aspeed,ast2500-kcs-bmc-v2"))
+		kcs_bmc = aspeed_kcs_probe_of_v2(pdev);
+	else
+		return -EINVAL;
 
-	rc = of_property_read_u32(dev->of_node, "kcs_addr", &addr);
-	if (rc) {
-		dev_err(dev, "no valid 'kcs_addr' configured\n");
-		return -ENODEV;
-	}
+	if (IS_ERR(kcs_bmc))
+		return PTR_ERR(kcs_bmc);
 
-	kcs_bmc = kcs_bmc_alloc(dev, sizeof(*priv), chan);
-	if (!kcs_bmc)
-		return -ENOMEM;
-
-	priv = kcs_bmc_priv(kcs_bmc);
-	priv->map = syscon_node_to_regmap(dev->parent->of_node);
-	if (IS_ERR(priv->map)) {
-		dev_err(dev, "Couldn't get regmap\n");
-		return -ENODEV;
-	}
-
-	kcs_bmc->ioreg = ast_kcs_bmc_ioregs[chan - 1];
 	kcs_bmc->io_inputb = aspeed_kcs_inb;
 	kcs_bmc->io_outputb = aspeed_kcs_outb;
 
-	dev_set_drvdata(dev, kcs_bmc);
-
-	aspeed_kcs_set_address(kcs_bmc, addr);
-	aspeed_kcs_enable_channel(kcs_bmc, true);
 	rc = aspeed_kcs_config_irq(kcs_bmc, pdev);
 	if (rc)
 		return rc;
 
+	dev_set_drvdata(dev, kcs_bmc);
+
+	aspeed_kcs_enable_channel(kcs_bmc, true);
+
 	rc = misc_register(&kcs_bmc->miscdev);
 	if (rc) {
 		dev_err(dev, "Unable to register device\n");
 		return rc;
 	}
 
-	pr_info("channel=%u addr=0x%x idr=0x%x odr=0x%x str=0x%x\n",
-		chan, addr,
-		kcs_bmc->ioreg.idr, kcs_bmc->ioreg.odr, kcs_bmc->ioreg.str);
+	dev_dbg(&pdev->dev,
+		"Probed KCS device %d (IDR=0x%x, ODR=0x%x, STR=0x%x)\n",
+		kcs_bmc->channel, kcs_bmc->ioreg.idr, kcs_bmc->ioreg.odr,
+		kcs_bmc->ioreg.str);
 
 	return 0;
 }
@@ -301,6 +398,8 @@ static int aspeed_kcs_remove(struct platform_device *pdev)
 static const struct of_device_id ast_kcs_bmc_match[] = {
 	{ .compatible = "aspeed,ast2400-kcs-bmc" },
 	{ .compatible = "aspeed,ast2500-kcs-bmc" },
+	{ .compatible = "aspeed,ast2400-kcs-bmc-v2" },
+	{ .compatible = "aspeed,ast2500-kcs-bmc-v2" },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, ast_kcs_bmc_match);
diff --git a/drivers/char/mspec.c b/drivers/char/mspec.c
index a9d9f07..7d58322 100644
--- a/drivers/char/mspec.c
+++ b/drivers/char/mspec.c
@@ -75,7 +75,7 @@ struct vma_data {
 	enum mspec_page_type type; /* Type of pages allocated. */
 	unsigned long vm_start;	/* Original (unsplit) base. */
 	unsigned long vm_end;	/* Original (unsplit) end. */
-	unsigned long maddr[0];	/* Array of MSPEC addresses. */
+	unsigned long maddr[];	/* Array of MSPEC addresses. */
 };
 
 /*
diff --git a/drivers/char/nwbutton.h b/drivers/char/nwbutton.h
index 9dedfd7..f2b9fdc 100644
--- a/drivers/char/nwbutton.h
+++ b/drivers/char/nwbutton.h
@@ -14,7 +14,6 @@
 #define NUM_PRESSES_REBOOT 2	/* How many presses to activate shutdown */
 #define BUTTON_DELAY 30 	/* How many jiffies for sequence to end */
 #define VERSION "0.3"		/* Driver version number */
-#define BUTTON_MINOR 158	/* Major 10, Minor 158, /dev/nwbutton */
 
 /* Structure definitions: */
 
diff --git a/drivers/char/nwflash.c b/drivers/char/nwflash.c
index a4a0797d..0973c2c 100644
--- a/drivers/char/nwflash.c
+++ b/drivers/char/nwflash.c
@@ -576,7 +576,7 @@ static const struct file_operations flash_fops =
 
 static struct miscdevice flash_miscdev =
 {
-	FLASH_MINOR,
+	NWFLASH_MINOR,
 	"nwflash",
 	&flash_fops
 };
diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c
index 15bf585..4edb417 100644
--- a/drivers/char/pcmcia/cm4000_cs.c
+++ b/drivers/char/pcmcia/cm4000_cs.c
@@ -731,8 +731,9 @@ static void monitor_card(struct timer_list *t)
 	}
 
 	switch (dev->mstate) {
+	case M_CARDOFF: {
 		unsigned char flags0;
-	case M_CARDOFF:
+
 		DEBUGP(4, dev, "M_CARDOFF\n");
 		flags0 = inb(REG_FLAGS0(iobase));
 		if (flags0 & 0x02) {
@@ -755,6 +756,7 @@ static void monitor_card(struct timer_list *t)
 			dev->mdelay = T_50MSEC;
 		}
 		break;
+	}
 	case M_FETCH_ATR:
 		DEBUGP(4, dev, "M_FETCH_ATR\n");
 		xoutb(0x80, REG_FLAGS0(iobase));
diff --git a/drivers/char/ppdev.c b/drivers/char/ppdev.c
index 2c2381a..38b46c7 100644
--- a/drivers/char/ppdev.c
+++ b/drivers/char/ppdev.c
@@ -355,14 +355,19 @@ static int pp_do_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	struct pp_struct *pp = file->private_data;
 	struct parport *port;
 	void __user *argp = (void __user *)arg;
+	struct ieee1284_info *info;
+	unsigned char reg;
+	unsigned char mask;
+	int mode;
+	s32 time32[2];
+	s64 time64[2];
+	struct timespec64 ts;
+	int ret;
 
 	/* First handle the cases that don't take arguments. */
 	switch (cmd) {
 	case PPCLAIM:
 	    {
-		struct ieee1284_info *info;
-		int ret;
-
 		if (pp->flags & PP_CLAIMED) {
 			dev_dbg(&pp->pdev->dev, "you've already got it!\n");
 			return -EINVAL;
@@ -513,15 +518,6 @@ static int pp_do_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 
 	port = pp->pdev->port;
 	switch (cmd) {
-		struct ieee1284_info *info;
-		unsigned char reg;
-		unsigned char mask;
-		int mode;
-		s32 time32[2];
-		s64 time64[2];
-		struct timespec64 ts;
-		int ret;
-
 	case PPRSTATUS:
 		reg = parport_read_status(port);
 		if (copy_to_user(argp, &reg, sizeof(reg)))
diff --git a/drivers/char/random.c b/drivers/char/random.c
index c7f9584..0d10e31 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -781,27 +781,55 @@ static int __init parse_trust_cpu(char *arg)
 }
 early_param("random.trust_cpu", parse_trust_cpu);
 
-static void crng_initialize(struct crng_state *crng)
+static bool crng_init_try_arch(struct crng_state *crng)
 {
 	int		i;
-	int		arch_init = 1;
+	bool		arch_init = true;
 	unsigned long	rv;
 
-	memcpy(&crng->state[0], "expand 32-byte k", 16);
-	if (crng == &primary_crng)
-		_extract_entropy(&input_pool, &crng->state[4],
-				 sizeof(__u32) * 12, 0);
-	else
-		_get_random_bytes(&crng->state[4], sizeof(__u32) * 12);
 	for (i = 4; i < 16; i++) {
 		if (!arch_get_random_seed_long(&rv) &&
 		    !arch_get_random_long(&rv)) {
 			rv = random_get_entropy();
-			arch_init = 0;
+			arch_init = false;
 		}
 		crng->state[i] ^= rv;
 	}
-	if (trust_cpu && arch_init && crng == &primary_crng) {
+
+	return arch_init;
+}
+
+static bool __init crng_init_try_arch_early(struct crng_state *crng)
+{
+	int		i;
+	bool		arch_init = true;
+	unsigned long	rv;
+
+	for (i = 4; i < 16; i++) {
+		if (!arch_get_random_seed_long_early(&rv) &&
+		    !arch_get_random_long_early(&rv)) {
+			rv = random_get_entropy();
+			arch_init = false;
+		}
+		crng->state[i] ^= rv;
+	}
+
+	return arch_init;
+}
+
+static void __maybe_unused crng_initialize_secondary(struct crng_state *crng)
+{
+	memcpy(&crng->state[0], "expand 32-byte k", 16);
+	_get_random_bytes(&crng->state[4], sizeof(__u32) * 12);
+	crng_init_try_arch(crng);
+	crng->init_time = jiffies - CRNG_RESEED_INTERVAL - 1;
+}
+
+static void __init crng_initialize_primary(struct crng_state *crng)
+{
+	memcpy(&crng->state[0], "expand 32-byte k", 16);
+	_extract_entropy(&input_pool, &crng->state[4], sizeof(__u32) * 12, 0);
+	if (crng_init_try_arch_early(crng) && trust_cpu) {
 		invalidate_batched_entropy();
 		numa_crng_init();
 		crng_init = 2;
@@ -822,7 +850,7 @@ static void do_numa_crng_init(struct work_struct *work)
 		crng = kmalloc_node(sizeof(struct crng_state),
 				    GFP_KERNEL | __GFP_NOFAIL, i);
 		spin_lock_init(&crng->lock);
-		crng_initialize(crng);
+		crng_initialize_secondary(crng);
 		pool[i] = crng;
 	}
 	mb();
@@ -1142,14 +1170,14 @@ static void add_timer_randomness(struct timer_rand_state *state, unsigned num)
 	 * We take into account the first, second and third-order deltas
 	 * in order to make our estimate.
 	 */
-	delta = sample.jiffies - state->last_time;
-	state->last_time = sample.jiffies;
+	delta = sample.jiffies - READ_ONCE(state->last_time);
+	WRITE_ONCE(state->last_time, sample.jiffies);
 
-	delta2 = delta - state->last_delta;
-	state->last_delta = delta;
+	delta2 = delta - READ_ONCE(state->last_delta);
+	WRITE_ONCE(state->last_delta, delta);
 
-	delta3 = delta2 - state->last_delta2;
-	state->last_delta2 = delta2;
+	delta3 = delta2 - READ_ONCE(state->last_delta2);
+	WRITE_ONCE(state->last_delta2, delta2);
 
 	if (delta < 0)
 		delta = -delta;
@@ -1771,7 +1799,7 @@ static void __init init_std_data(struct entropy_store *r)
 int __init rand_initialize(void)
 {
 	init_std_data(&input_pool);
-	crng_initialize(&primary_crng);
+	crng_initialize_primary(&primary_crng);
 	crng_global_init_time = jiffies;
 	if (ratelimit_disable) {
 		urandom_warning.interval = 0;
@@ -2149,11 +2177,11 @@ struct batched_entropy {
 
 /*
  * Get a random word for internal kernel use only. The quality of the random
- * number is either as good as RDRAND or as good as /dev/urandom, with the
- * goal of being quite fast and not depleting entropy. In order to ensure
+ * number is good as /dev/urandom, but there is no backtrack protection, with
+ * the goal of being quite fast and not depleting entropy. In order to ensure
  * that the randomness provided by this function is okay, the function
- * wait_for_random_bytes() should be called and return 0 at least once
- * at any point prior.
+ * wait_for_random_bytes() should be called and return 0 at least once at any
+ * point prior.
  */
 static DEFINE_PER_CPU(struct batched_entropy, batched_entropy_u64) = {
 	.batch_lock	= __SPIN_LOCK_UNLOCKED(batched_entropy_u64.lock),
@@ -2166,15 +2194,6 @@ u64 get_random_u64(void)
 	struct batched_entropy *batch;
 	static void *previous;
 
-#if BITS_PER_LONG == 64
-	if (arch_get_random_long((unsigned long *)&ret))
-		return ret;
-#else
-	if (arch_get_random_long((unsigned long *)&ret) &&
-	    arch_get_random_long((unsigned long *)&ret + 1))
-	    return ret;
-#endif
-
 	warn_unseeded_randomness(&previous);
 
 	batch = raw_cpu_ptr(&batched_entropy_u64);
@@ -2199,9 +2218,6 @@ u32 get_random_u32(void)
 	struct batched_entropy *batch;
 	static void *previous;
 
-	if (arch_get_random_int(&ret))
-		return ret;
-
 	warn_unseeded_randomness(&previous);
 
 	batch = raw_cpu_ptr(&batched_entropy_u32);
diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c
deleted file mode 100644
index 3b91184..0000000
--- a/drivers/char/rtc.c
+++ /dev/null
@@ -1,1311 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- *	Real Time Clock interface for Linux
- *
- *	Copyright (C) 1996 Paul Gortmaker
- *
- *	This driver allows use of the real time clock (built into
- *	nearly all computers) from user space. It exports the /dev/rtc
- *	interface supporting various ioctl() and also the
- *	/proc/driver/rtc pseudo-file for status information.
- *
- *	The ioctls can be used to set the interrupt behaviour and
- *	generation rate from the RTC via IRQ 8. Then the /dev/rtc
- *	interface can be used to make use of these timer interrupts,
- *	be they interval or alarm based.
- *
- *	The /dev/rtc interface will block on reads until an interrupt
- *	has been received. If a RTC interrupt has already happened,
- *	it will output an unsigned long and then block. The output value
- *	contains the interrupt status in the low byte and the number of
- *	interrupts since the last read in the remaining high bytes. The
- *	/dev/rtc interface can also be used with the select(2) call.
- *
- *	Based on other minimal char device drivers, like Alan's
- *	watchdog, Ted's random, etc. etc.
- *
- *	1.07	Paul Gortmaker.
- *	1.08	Miquel van Smoorenburg: disallow certain things on the
- *		DEC Alpha as the CMOS clock is also used for other things.
- *	1.09	Nikita Schmidt: epoch support and some Alpha cleanup.
- *	1.09a	Pete Zaitcev: Sun SPARC
- *	1.09b	Jeff Garzik: Modularize, init cleanup
- *	1.09c	Jeff Garzik: SMP cleanup
- *	1.10	Paul Barton-Davis: add support for async I/O
- *	1.10a	Andrea Arcangeli: Alpha updates
- *	1.10b	Andrew Morton: SMP lock fix
- *	1.10c	Cesar Barros: SMP locking fixes and cleanup
- *	1.10d	Paul Gortmaker: delete paranoia check in rtc_exit
- *	1.10e	Maciej W. Rozycki: Handle DECstation's year weirdness.
- *	1.11	Takashi Iwai: Kernel access functions
- *			      rtc_register/rtc_unregister/rtc_control
- *      1.11a   Daniele Bellucci: Audit create_proc_read_entry in rtc_init
- *	1.12	Venkatesh Pallipadi: Hooks for emulating rtc on HPET base-timer
- *		CONFIG_HPET_EMULATE_RTC
- *	1.12a	Maciej W. Rozycki: Handle memory-mapped chips properly.
- *	1.12ac	Alan Cox: Allow read access to the day of week register
- *	1.12b	David John: Remove calls to the BKL.
- */
-
-#define RTC_VERSION		"1.12b"
-
-/*
- *	Note that *all* calls to CMOS_READ and CMOS_WRITE are done with
- *	interrupts disabled. Due to the index-port/data-port (0x70/0x71)
- *	design of the RTC, we don't want two different things trying to
- *	get to it at once. (e.g. the periodic 11 min sync from
- *      kernel/time/ntp.c vs. this driver.)
- */
-
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/miscdevice.h>
-#include <linux/ioport.h>
-#include <linux/fcntl.h>
-#include <linux/mc146818rtc.h>
-#include <linux/init.h>
-#include <linux/poll.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/spinlock.h>
-#include <linux/sched/signal.h>
-#include <linux/sysctl.h>
-#include <linux/wait.h>
-#include <linux/bcd.h>
-#include <linux/delay.h>
-#include <linux/uaccess.h>
-#include <linux/ratelimit.h>
-
-#include <asm/current.h>
-
-#ifdef CONFIG_X86
-#include <asm/hpet.h>
-#endif
-
-#ifdef CONFIG_SPARC32
-#include <linux/of.h>
-#include <linux/of_device.h>
-#include <asm/io.h>
-
-static unsigned long rtc_port;
-static int rtc_irq;
-#endif
-
-#ifdef	CONFIG_HPET_EMULATE_RTC
-#undef	RTC_IRQ
-#endif
-
-#ifdef RTC_IRQ
-static int rtc_has_irq = 1;
-#endif
-
-#ifndef CONFIG_HPET_EMULATE_RTC
-#define is_hpet_enabled()			0
-#define hpet_set_alarm_time(hrs, min, sec)	0
-#define hpet_set_periodic_freq(arg)		0
-#define hpet_mask_rtc_irq_bit(arg)		0
-#define hpet_set_rtc_irq_bit(arg)		0
-#define hpet_rtc_timer_init()			do { } while (0)
-#define hpet_rtc_dropped_irq()			0
-#define hpet_register_irq_handler(h)		({ 0; })
-#define hpet_unregister_irq_handler(h)		({ 0; })
-#ifdef RTC_IRQ
-static irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id)
-{
-	return 0;
-}
-#endif
-#endif
-
-/*
- *	We sponge a minor off of the misc major. No need slurping
- *	up another valuable major dev number for this. If you add
- *	an ioctl, make sure you don't conflict with SPARC's RTC
- *	ioctls.
- */
-
-static struct fasync_struct *rtc_async_queue;
-
-static DECLARE_WAIT_QUEUE_HEAD(rtc_wait);
-
-#ifdef RTC_IRQ
-static void rtc_dropped_irq(struct timer_list *unused);
-
-static DEFINE_TIMER(rtc_irq_timer, rtc_dropped_irq);
-#endif
-
-static ssize_t rtc_read(struct file *file, char __user *buf,
-			size_t count, loff_t *ppos);
-
-static long rtc_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
-static void rtc_get_rtc_time(struct rtc_time *rtc_tm);
-
-#ifdef RTC_IRQ
-static __poll_t rtc_poll(struct file *file, poll_table *wait);
-#endif
-
-static void get_rtc_alm_time(struct rtc_time *alm_tm);
-#ifdef RTC_IRQ
-static void set_rtc_irq_bit_locked(unsigned char bit);
-static void mask_rtc_irq_bit_locked(unsigned char bit);
-
-static inline void set_rtc_irq_bit(unsigned char bit)
-{
-	spin_lock_irq(&rtc_lock);
-	set_rtc_irq_bit_locked(bit);
-	spin_unlock_irq(&rtc_lock);
-}
-
-static void mask_rtc_irq_bit(unsigned char bit)
-{
-	spin_lock_irq(&rtc_lock);
-	mask_rtc_irq_bit_locked(bit);
-	spin_unlock_irq(&rtc_lock);
-}
-#endif
-
-#ifdef CONFIG_PROC_FS
-static int rtc_proc_show(struct seq_file *seq, void *v);
-#endif
-
-/*
- *	Bits in rtc_status. (6 bits of room for future expansion)
- */
-
-#define RTC_IS_OPEN		0x01	/* means /dev/rtc is in use	*/
-#define RTC_TIMER_ON		0x02	/* missed irq timer active	*/
-
-/*
- * rtc_status is never changed by rtc_interrupt, and ioctl/open/close is
- * protected by the spin lock rtc_lock. However, ioctl can still disable the
- * timer in rtc_status and then with del_timer after the interrupt has read
- * rtc_status but before mod_timer is called, which would then reenable the
- * timer (but you would need to have an awful timing before you'd trip on it)
- */
-static unsigned long rtc_status;	/* bitmapped status byte.	*/
-static unsigned long rtc_freq;		/* Current periodic IRQ rate	*/
-static unsigned long rtc_irq_data;	/* our output to the world	*/
-static unsigned long rtc_max_user_freq = 64; /* > this, need CAP_SYS_RESOURCE */
-
-/*
- *	If this driver ever becomes modularised, it will be really nice
- *	to make the epoch retain its value across module reload...
- */
-
-static unsigned long epoch = 1900;	/* year corresponding to 0x00	*/
-
-static const unsigned char days_in_mo[] =
-{0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
-
-/*
- * Returns true if a clock update is in progress
- */
-static inline unsigned char rtc_is_updating(void)
-{
-	unsigned long flags;
-	unsigned char uip;
-
-	spin_lock_irqsave(&rtc_lock, flags);
-	uip = (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP);
-	spin_unlock_irqrestore(&rtc_lock, flags);
-	return uip;
-}
-
-#ifdef RTC_IRQ
-/*
- *	A very tiny interrupt handler. It runs with interrupts disabled,
- *	but there is possibility of conflicting with the set_rtc_mmss()
- *	call (the rtc irq and the timer irq can easily run at the same
- *	time in two different CPUs). So we need to serialize
- *	accesses to the chip with the rtc_lock spinlock that each
- *	architecture should implement in the timer code.
- *	(See ./arch/XXXX/kernel/time.c for the set_rtc_mmss() function.)
- */
-
-static irqreturn_t rtc_interrupt(int irq, void *dev_id)
-{
-	/*
-	 *	Can be an alarm interrupt, update complete interrupt,
-	 *	or a periodic interrupt. We store the status in the
-	 *	low byte and the number of interrupts received since
-	 *	the last read in the remainder of rtc_irq_data.
-	 */
-
-	spin_lock(&rtc_lock);
-	rtc_irq_data += 0x100;
-	rtc_irq_data &= ~0xff;
-	if (is_hpet_enabled()) {
-		/*
-		 * In this case it is HPET RTC interrupt handler
-		 * calling us, with the interrupt information
-		 * passed as arg1, instead of irq.
-		 */
-		rtc_irq_data |= (unsigned long)irq & 0xF0;
-	} else {
-		rtc_irq_data |= (CMOS_READ(RTC_INTR_FLAGS) & 0xF0);
-	}
-
-	if (rtc_status & RTC_TIMER_ON)
-		mod_timer(&rtc_irq_timer, jiffies + HZ/rtc_freq + 2*HZ/100);
-
-	spin_unlock(&rtc_lock);
-
-	wake_up_interruptible(&rtc_wait);
-
-	kill_fasync(&rtc_async_queue, SIGIO, POLL_IN);
-
-	return IRQ_HANDLED;
-}
-#endif
-
-/*
- * sysctl-tuning infrastructure.
- */
-static struct ctl_table rtc_table[] = {
-	{
-		.procname	= "max-user-freq",
-		.data		= &rtc_max_user_freq,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-	{ }
-};
-
-static struct ctl_table rtc_root[] = {
-	{
-		.procname	= "rtc",
-		.mode		= 0555,
-		.child		= rtc_table,
-	},
-	{ }
-};
-
-static struct ctl_table dev_root[] = {
-	{
-		.procname	= "dev",
-		.mode		= 0555,
-		.child		= rtc_root,
-	},
-	{ }
-};
-
-static struct ctl_table_header *sysctl_header;
-
-static int __init init_sysctl(void)
-{
-    sysctl_header = register_sysctl_table(dev_root);
-    return 0;
-}
-
-static void __exit cleanup_sysctl(void)
-{
-    unregister_sysctl_table(sysctl_header);
-}
-
-/*
- *	Now all the various file operations that we export.
- */
-
-static ssize_t rtc_read(struct file *file, char __user *buf,
-			size_t count, loff_t *ppos)
-{
-#ifndef RTC_IRQ
-	return -EIO;
-#else
-	DECLARE_WAITQUEUE(wait, current);
-	unsigned long data;
-	ssize_t retval;
-
-	if (rtc_has_irq == 0)
-		return -EIO;
-
-	/*
-	 * Historically this function used to assume that sizeof(unsigned long)
-	 * is the same in userspace and kernelspace.  This lead to problems
-	 * for configurations with multiple ABIs such a the MIPS o32 and 64
-	 * ABIs supported on the same kernel.  So now we support read of both
-	 * 4 and 8 bytes and assume that's the sizeof(unsigned long) in the
-	 * userspace ABI.
-	 */
-	if (count != sizeof(unsigned int) && count !=  sizeof(unsigned long))
-		return -EINVAL;
-
-	add_wait_queue(&rtc_wait, &wait);
-
-	do {
-		/* First make it right. Then make it fast. Putting this whole
-		 * block within the parentheses of a while would be too
-		 * confusing. And no, xchg() is not the answer. */
-
-		__set_current_state(TASK_INTERRUPTIBLE);
-
-		spin_lock_irq(&rtc_lock);
-		data = rtc_irq_data;
-		rtc_irq_data = 0;
-		spin_unlock_irq(&rtc_lock);
-
-		if (data != 0)
-			break;
-
-		if (file->f_flags & O_NONBLOCK) {
-			retval = -EAGAIN;
-			goto out;
-		}
-		if (signal_pending(current)) {
-			retval = -ERESTARTSYS;
-			goto out;
-		}
-		schedule();
-	} while (1);
-
-	if (count == sizeof(unsigned int)) {
-		retval = put_user(data,
-				  (unsigned int __user *)buf) ?: sizeof(int);
-	} else {
-		retval = put_user(data,
-				  (unsigned long __user *)buf) ?: sizeof(long);
-	}
-	if (!retval)
-		retval = count;
- out:
-	__set_current_state(TASK_RUNNING);
-	remove_wait_queue(&rtc_wait, &wait);
-
-	return retval;
-#endif
-}
-
-static int rtc_do_ioctl(unsigned int cmd, unsigned long arg, int kernel)
-{
-	struct rtc_time wtime;
-
-#ifdef RTC_IRQ
-	if (rtc_has_irq == 0) {
-		switch (cmd) {
-		case RTC_AIE_OFF:
-		case RTC_AIE_ON:
-		case RTC_PIE_OFF:
-		case RTC_PIE_ON:
-		case RTC_UIE_OFF:
-		case RTC_UIE_ON:
-		case RTC_IRQP_READ:
-		case RTC_IRQP_SET:
-			return -EINVAL;
-		}
-	}
-#endif
-
-	switch (cmd) {
-#ifdef RTC_IRQ
-	case RTC_AIE_OFF:	/* Mask alarm int. enab. bit	*/
-	{
-		mask_rtc_irq_bit(RTC_AIE);
-		return 0;
-	}
-	case RTC_AIE_ON:	/* Allow alarm interrupts.	*/
-	{
-		set_rtc_irq_bit(RTC_AIE);
-		return 0;
-	}
-	case RTC_PIE_OFF:	/* Mask periodic int. enab. bit	*/
-	{
-		/* can be called from isr via rtc_control() */
-		unsigned long flags;
-
-		spin_lock_irqsave(&rtc_lock, flags);
-		mask_rtc_irq_bit_locked(RTC_PIE);
-		if (rtc_status & RTC_TIMER_ON) {
-			rtc_status &= ~RTC_TIMER_ON;
-			del_timer(&rtc_irq_timer);
-		}
-		spin_unlock_irqrestore(&rtc_lock, flags);
-
-		return 0;
-	}
-	case RTC_PIE_ON:	/* Allow periodic ints		*/
-	{
-		/* can be called from isr via rtc_control() */
-		unsigned long flags;
-
-		/*
-		 * We don't really want Joe User enabling more
-		 * than 64Hz of interrupts on a multi-user machine.
-		 */
-		if (!kernel && (rtc_freq > rtc_max_user_freq) &&
-						(!capable(CAP_SYS_RESOURCE)))
-			return -EACCES;
-
-		spin_lock_irqsave(&rtc_lock, flags);
-		if (!(rtc_status & RTC_TIMER_ON)) {
-			mod_timer(&rtc_irq_timer, jiffies + HZ/rtc_freq +
-					2*HZ/100);
-			rtc_status |= RTC_TIMER_ON;
-		}
-		set_rtc_irq_bit_locked(RTC_PIE);
-		spin_unlock_irqrestore(&rtc_lock, flags);
-
-		return 0;
-	}
-	case RTC_UIE_OFF:	/* Mask ints from RTC updates.	*/
-	{
-		mask_rtc_irq_bit(RTC_UIE);
-		return 0;
-	}
-	case RTC_UIE_ON:	/* Allow ints for RTC updates.	*/
-	{
-		set_rtc_irq_bit(RTC_UIE);
-		return 0;
-	}
-#endif
-	case RTC_ALM_READ:	/* Read the present alarm time */
-	{
-		/*
-		 * This returns a struct rtc_time. Reading >= 0xc0
-		 * means "don't care" or "match all". Only the tm_hour,
-		 * tm_min, and tm_sec values are filled in.
-		 */
-		memset(&wtime, 0, sizeof(struct rtc_time));
-		get_rtc_alm_time(&wtime);
-		break;
-	}
-	case RTC_ALM_SET:	/* Store a time into the alarm */
-	{
-		/*
-		 * This expects a struct rtc_time. Writing 0xff means
-		 * "don't care" or "match all". Only the tm_hour,
-		 * tm_min and tm_sec are used.
-		 */
-		unsigned char hrs, min, sec;
-		struct rtc_time alm_tm;
-
-		if (copy_from_user(&alm_tm, (struct rtc_time __user *)arg,
-				   sizeof(struct rtc_time)))
-			return -EFAULT;
-
-		hrs = alm_tm.tm_hour;
-		min = alm_tm.tm_min;
-		sec = alm_tm.tm_sec;
-
-		spin_lock_irq(&rtc_lock);
-		if (hpet_set_alarm_time(hrs, min, sec)) {
-			/*
-			 * Fallthru and set alarm time in CMOS too,
-			 * so that we will get proper value in RTC_ALM_READ
-			 */
-		}
-		if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) ||
-							RTC_ALWAYS_BCD) {
-			if (sec < 60)
-				sec = bin2bcd(sec);
-			else
-				sec = 0xff;
-
-			if (min < 60)
-				min = bin2bcd(min);
-			else
-				min = 0xff;
-
-			if (hrs < 24)
-				hrs = bin2bcd(hrs);
-			else
-				hrs = 0xff;
-		}
-		CMOS_WRITE(hrs, RTC_HOURS_ALARM);
-		CMOS_WRITE(min, RTC_MINUTES_ALARM);
-		CMOS_WRITE(sec, RTC_SECONDS_ALARM);
-		spin_unlock_irq(&rtc_lock);
-
-		return 0;
-	}
-	case RTC_RD_TIME:	/* Read the time/date from RTC	*/
-	{
-		memset(&wtime, 0, sizeof(struct rtc_time));
-		rtc_get_rtc_time(&wtime);
-		break;
-	}
-	case RTC_SET_TIME:	/* Set the RTC */
-	{
-		struct rtc_time rtc_tm;
-		unsigned char mon, day, hrs, min, sec, leap_yr;
-		unsigned char save_control, save_freq_select;
-		unsigned int yrs;
-#ifdef CONFIG_MACH_DECSTATION
-		unsigned int real_yrs;
-#endif
-
-		if (!capable(CAP_SYS_TIME))
-			return -EACCES;
-
-		if (copy_from_user(&rtc_tm, (struct rtc_time __user *)arg,
-				   sizeof(struct rtc_time)))
-			return -EFAULT;
-
-		yrs = rtc_tm.tm_year + 1900;
-		mon = rtc_tm.tm_mon + 1;   /* tm_mon starts at zero */
-		day = rtc_tm.tm_mday;
-		hrs = rtc_tm.tm_hour;
-		min = rtc_tm.tm_min;
-		sec = rtc_tm.tm_sec;
-
-		if (yrs < 1970)
-			return -EINVAL;
-
-		leap_yr = ((!(yrs % 4) && (yrs % 100)) || !(yrs % 400));
-
-		if ((mon > 12) || (day == 0))
-			return -EINVAL;
-
-		if (day > (days_in_mo[mon] + ((mon == 2) && leap_yr)))
-			return -EINVAL;
-
-		if ((hrs >= 24) || (min >= 60) || (sec >= 60))
-			return -EINVAL;
-
-		yrs -= epoch;
-		if (yrs > 255)		/* They are unsigned */
-			return -EINVAL;
-
-		spin_lock_irq(&rtc_lock);
-#ifdef CONFIG_MACH_DECSTATION
-		real_yrs = yrs;
-		yrs = 72;
-
-		/*
-		 * We want to keep the year set to 73 until March
-		 * for non-leap years, so that Feb, 29th is handled
-		 * correctly.
-		 */
-		if (!leap_yr && mon < 3) {
-			real_yrs--;
-			yrs = 73;
-		}
-#endif
-		/* These limits and adjustments are independent of
-		 * whether the chip is in binary mode or not.
-		 */
-		if (yrs > 169) {
-			spin_unlock_irq(&rtc_lock);
-			return -EINVAL;
-		}
-		if (yrs >= 100)
-			yrs -= 100;
-
-		if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY)
-		    || RTC_ALWAYS_BCD) {
-			sec = bin2bcd(sec);
-			min = bin2bcd(min);
-			hrs = bin2bcd(hrs);
-			day = bin2bcd(day);
-			mon = bin2bcd(mon);
-			yrs = bin2bcd(yrs);
-		}
-
-		save_control = CMOS_READ(RTC_CONTROL);
-		CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
-		save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
-		CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
-
-#ifdef CONFIG_MACH_DECSTATION
-		CMOS_WRITE(real_yrs, RTC_DEC_YEAR);
-#endif
-		CMOS_WRITE(yrs, RTC_YEAR);
-		CMOS_WRITE(mon, RTC_MONTH);
-		CMOS_WRITE(day, RTC_DAY_OF_MONTH);
-		CMOS_WRITE(hrs, RTC_HOURS);
-		CMOS_WRITE(min, RTC_MINUTES);
-		CMOS_WRITE(sec, RTC_SECONDS);
-
-		CMOS_WRITE(save_control, RTC_CONTROL);
-		CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
-
-		spin_unlock_irq(&rtc_lock);
-		return 0;
-	}
-#ifdef RTC_IRQ
-	case RTC_IRQP_READ:	/* Read the periodic IRQ rate.	*/
-	{
-		return put_user(rtc_freq, (unsigned long __user *)arg);
-	}
-	case RTC_IRQP_SET:	/* Set periodic IRQ rate.	*/
-	{
-		int tmp = 0;
-		unsigned char val;
-		/* can be called from isr via rtc_control() */
-		unsigned long flags;
-
-		/*
-		 * The max we can do is 8192Hz.
-		 */
-		if ((arg < 2) || (arg > 8192))
-			return -EINVAL;
-		/*
-		 * We don't really want Joe User generating more
-		 * than 64Hz of interrupts on a multi-user machine.
-		 */
-		if (!kernel && (arg > rtc_max_user_freq) &&
-					!capable(CAP_SYS_RESOURCE))
-			return -EACCES;
-
-		while (arg > (1<<tmp))
-			tmp++;
-
-		/*
-		 * Check that the input was really a power of 2.
-		 */
-		if (arg != (1<<tmp))
-			return -EINVAL;
-
-		rtc_freq = arg;
-
-		spin_lock_irqsave(&rtc_lock, flags);
-		if (hpet_set_periodic_freq(arg)) {
-			spin_unlock_irqrestore(&rtc_lock, flags);
-			return 0;
-		}
-
-		val = CMOS_READ(RTC_FREQ_SELECT) & 0xf0;
-		val |= (16 - tmp);
-		CMOS_WRITE(val, RTC_FREQ_SELECT);
-		spin_unlock_irqrestore(&rtc_lock, flags);
-		return 0;
-	}
-#endif
-	case RTC_EPOCH_READ:	/* Read the epoch.	*/
-	{
-		return put_user(epoch, (unsigned long __user *)arg);
-	}
-	case RTC_EPOCH_SET:	/* Set the epoch.	*/
-	{
-		/*
-		 * There were no RTC clocks before 1900.
-		 */
-		if (arg < 1900)
-			return -EINVAL;
-
-		if (!capable(CAP_SYS_TIME))
-			return -EACCES;
-
-		epoch = arg;
-		return 0;
-	}
-	default:
-		return -ENOTTY;
-	}
-	return copy_to_user((void __user *)arg,
-			    &wtime, sizeof wtime) ? -EFAULT : 0;
-}
-
-static long rtc_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-{
-	long ret;
-	ret = rtc_do_ioctl(cmd, arg, 0);
-	return ret;
-}
-
-/*
- *	We enforce only one user at a time here with the open/close.
- *	Also clear the previous interrupt data on an open, and clean
- *	up things on a close.
- */
-static int rtc_open(struct inode *inode, struct file *file)
-{
-	spin_lock_irq(&rtc_lock);
-
-	if (rtc_status & RTC_IS_OPEN)
-		goto out_busy;
-
-	rtc_status |= RTC_IS_OPEN;
-
-	rtc_irq_data = 0;
-	spin_unlock_irq(&rtc_lock);
-	return 0;
-
-out_busy:
-	spin_unlock_irq(&rtc_lock);
-	return -EBUSY;
-}
-
-static int rtc_fasync(int fd, struct file *filp, int on)
-{
-	return fasync_helper(fd, filp, on, &rtc_async_queue);
-}
-
-static int rtc_release(struct inode *inode, struct file *file)
-{
-#ifdef RTC_IRQ
-	unsigned char tmp;
-
-	if (rtc_has_irq == 0)
-		goto no_irq;
-
-	/*
-	 * Turn off all interrupts once the device is no longer
-	 * in use, and clear the data.
-	 */
-
-	spin_lock_irq(&rtc_lock);
-	if (!hpet_mask_rtc_irq_bit(RTC_PIE | RTC_AIE | RTC_UIE)) {
-		tmp = CMOS_READ(RTC_CONTROL);
-		tmp &=  ~RTC_PIE;
-		tmp &=  ~RTC_AIE;
-		tmp &=  ~RTC_UIE;
-		CMOS_WRITE(tmp, RTC_CONTROL);
-		CMOS_READ(RTC_INTR_FLAGS);
-	}
-	if (rtc_status & RTC_TIMER_ON) {
-		rtc_status &= ~RTC_TIMER_ON;
-		del_timer(&rtc_irq_timer);
-	}
-	spin_unlock_irq(&rtc_lock);
-
-no_irq:
-#endif
-
-	spin_lock_irq(&rtc_lock);
-	rtc_irq_data = 0;
-	rtc_status &= ~RTC_IS_OPEN;
-	spin_unlock_irq(&rtc_lock);
-
-	return 0;
-}
-
-#ifdef RTC_IRQ
-static __poll_t rtc_poll(struct file *file, poll_table *wait)
-{
-	unsigned long l;
-
-	if (rtc_has_irq == 0)
-		return 0;
-
-	poll_wait(file, &rtc_wait, wait);
-
-	spin_lock_irq(&rtc_lock);
-	l = rtc_irq_data;
-	spin_unlock_irq(&rtc_lock);
-
-	if (l != 0)
-		return EPOLLIN | EPOLLRDNORM;
-	return 0;
-}
-#endif
-
-/*
- *	The various file operations we support.
- */
-
-static const struct file_operations rtc_fops = {
-	.owner		= THIS_MODULE,
-	.llseek		= no_llseek,
-	.read		= rtc_read,
-#ifdef RTC_IRQ
-	.poll		= rtc_poll,
-#endif
-	.unlocked_ioctl	= rtc_ioctl,
-	.open		= rtc_open,
-	.release	= rtc_release,
-	.fasync		= rtc_fasync,
-};
-
-static struct miscdevice rtc_dev = {
-	.minor		= RTC_MINOR,
-	.name		= "rtc",
-	.fops		= &rtc_fops,
-};
-
-static resource_size_t rtc_size;
-
-static struct resource * __init rtc_request_region(resource_size_t size)
-{
-	struct resource *r;
-
-	if (RTC_IOMAPPED)
-		r = request_region(RTC_PORT(0), size, "rtc");
-	else
-		r = request_mem_region(RTC_PORT(0), size, "rtc");
-
-	if (r)
-		rtc_size = size;
-
-	return r;
-}
-
-static void rtc_release_region(void)
-{
-	if (RTC_IOMAPPED)
-		release_region(RTC_PORT(0), rtc_size);
-	else
-		release_mem_region(RTC_PORT(0), rtc_size);
-}
-
-static int __init rtc_init(void)
-{
-#ifdef CONFIG_PROC_FS
-	struct proc_dir_entry *ent;
-#endif
-#if defined(__alpha__) || defined(__mips__)
-	unsigned int year, ctrl;
-	char *guess = NULL;
-#endif
-#ifdef CONFIG_SPARC32
-	struct device_node *ebus_dp;
-	struct platform_device *op;
-#else
-	void *r;
-#ifdef RTC_IRQ
-	irq_handler_t rtc_int_handler_ptr;
-#endif
-#endif
-
-#ifdef CONFIG_SPARC32
-	for_each_node_by_name(ebus_dp, "ebus") {
-		struct device_node *dp;
-		for_each_child_of_node(ebus_dp, dp) {
-			if (of_node_name_eq(dp, "rtc")) {
-				op = of_find_device_by_node(dp);
-				if (op) {
-					rtc_port = op->resource[0].start;
-					rtc_irq = op->irqs[0];
-					goto found;
-				}
-			}
-		}
-	}
-	rtc_has_irq = 0;
-	printk(KERN_ERR "rtc_init: no PC rtc found\n");
-	return -EIO;
-
-found:
-	if (!rtc_irq) {
-		rtc_has_irq = 0;
-		goto no_irq;
-	}
-
-	/*
-	 * XXX Interrupt pin #7 in Espresso is shared between RTC and
-	 * PCI Slot 2 INTA# (and some INTx# in Slot 1).
-	 */
-	if (request_irq(rtc_irq, rtc_interrupt, IRQF_SHARED, "rtc",
-			(void *)&rtc_port)) {
-		rtc_has_irq = 0;
-		printk(KERN_ERR "rtc: cannot register IRQ %d\n", rtc_irq);
-		return -EIO;
-	}
-no_irq:
-#else
-	r = rtc_request_region(RTC_IO_EXTENT);
-
-	/*
-	 * If we've already requested a smaller range (for example, because
-	 * PNPBIOS or ACPI told us how the device is configured), the request
-	 * above might fail because it's too big.
-	 *
-	 * If so, request just the range we actually use.
-	 */
-	if (!r)
-		r = rtc_request_region(RTC_IO_EXTENT_USED);
-	if (!r) {
-#ifdef RTC_IRQ
-		rtc_has_irq = 0;
-#endif
-		printk(KERN_ERR "rtc: I/O resource %lx is not free.\n",
-		       (long)(RTC_PORT(0)));
-		return -EIO;
-	}
-
-#ifdef RTC_IRQ
-	if (is_hpet_enabled()) {
-		int err;
-
-		rtc_int_handler_ptr = hpet_rtc_interrupt;
-		err = hpet_register_irq_handler(rtc_interrupt);
-		if (err != 0) {
-			printk(KERN_WARNING "hpet_register_irq_handler failed "
-					"in rtc_init().");
-			return err;
-		}
-	} else {
-		rtc_int_handler_ptr = rtc_interrupt;
-	}
-
-	if (request_irq(RTC_IRQ, rtc_int_handler_ptr, 0, "rtc", NULL)) {
-		/* Yeah right, seeing as irq 8 doesn't even hit the bus. */
-		rtc_has_irq = 0;
-		printk(KERN_ERR "rtc: IRQ %d is not free.\n", RTC_IRQ);
-		rtc_release_region();
-
-		return -EIO;
-	}
-	hpet_rtc_timer_init();
-
-#endif
-
-#endif /* CONFIG_SPARC32 vs. others */
-
-	if (misc_register(&rtc_dev)) {
-#ifdef RTC_IRQ
-		free_irq(RTC_IRQ, NULL);
-		hpet_unregister_irq_handler(rtc_interrupt);
-		rtc_has_irq = 0;
-#endif
-		rtc_release_region();
-		return -ENODEV;
-	}
-
-#ifdef CONFIG_PROC_FS
-	ent = proc_create_single("driver/rtc", 0, NULL, rtc_proc_show);
-	if (!ent)
-		printk(KERN_WARNING "rtc: Failed to register with procfs.\n");
-#endif
-
-#if defined(__alpha__) || defined(__mips__)
-	rtc_freq = HZ;
-
-	/* Each operating system on an Alpha uses its own epoch.
-	   Let's try to guess which one we are using now. */
-
-	if (rtc_is_updating() != 0)
-		msleep(20);
-
-	spin_lock_irq(&rtc_lock);
-	year = CMOS_READ(RTC_YEAR);
-	ctrl = CMOS_READ(RTC_CONTROL);
-	spin_unlock_irq(&rtc_lock);
-
-	if (!(ctrl & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
-		year = bcd2bin(year);       /* This should never happen... */
-
-	if (year < 20) {
-		epoch = 2000;
-		guess = "SRM (post-2000)";
-	} else if (year >= 20 && year < 48) {
-		epoch = 1980;
-		guess = "ARC console";
-	} else if (year >= 48 && year < 72) {
-		epoch = 1952;
-		guess = "Digital UNIX";
-#if defined(__mips__)
-	} else if (year >= 72 && year < 74) {
-		epoch = 2000;
-		guess = "Digital DECstation";
-#else
-	} else if (year >= 70) {
-		epoch = 1900;
-		guess = "Standard PC (1900)";
-#endif
-	}
-	if (guess)
-		printk(KERN_INFO "rtc: %s epoch (%lu) detected\n",
-			guess, epoch);
-#endif
-#ifdef RTC_IRQ
-	if (rtc_has_irq == 0)
-		goto no_irq2;
-
-	spin_lock_irq(&rtc_lock);
-	rtc_freq = 1024;
-	if (!hpet_set_periodic_freq(rtc_freq)) {
-		/*
-		 * Initialize periodic frequency to CMOS reset default,
-		 * which is 1024Hz
-		 */
-		CMOS_WRITE(((CMOS_READ(RTC_FREQ_SELECT) & 0xF0) | 0x06),
-			   RTC_FREQ_SELECT);
-	}
-	spin_unlock_irq(&rtc_lock);
-no_irq2:
-#endif
-
-	(void) init_sysctl();
-
-	printk(KERN_INFO "Real Time Clock Driver v" RTC_VERSION "\n");
-
-	return 0;
-}
-
-static void __exit rtc_exit(void)
-{
-	cleanup_sysctl();
-	remove_proc_entry("driver/rtc", NULL);
-	misc_deregister(&rtc_dev);
-
-#ifdef CONFIG_SPARC32
-	if (rtc_has_irq)
-		free_irq(rtc_irq, &rtc_port);
-#else
-	rtc_release_region();
-#ifdef RTC_IRQ
-	if (rtc_has_irq) {
-		free_irq(RTC_IRQ, NULL);
-		hpet_unregister_irq_handler(hpet_rtc_interrupt);
-	}
-#endif
-#endif /* CONFIG_SPARC32 */
-}
-
-module_init(rtc_init);
-module_exit(rtc_exit);
-
-#ifdef RTC_IRQ
-/*
- *	At IRQ rates >= 4096Hz, an interrupt may get lost altogether.
- *	(usually during an IDE disk interrupt, with IRQ unmasking off)
- *	Since the interrupt handler doesn't get called, the IRQ status
- *	byte doesn't get read, and the RTC stops generating interrupts.
- *	A timer is set, and will call this function if/when that happens.
- *	To get it out of this stalled state, we just read the status.
- *	At least a jiffy of interrupts (rtc_freq/HZ) will have been lost.
- *	(You *really* shouldn't be trying to use a non-realtime system
- *	for something that requires a steady > 1KHz signal anyways.)
- */
-
-static void rtc_dropped_irq(struct timer_list *unused)
-{
-	unsigned long freq;
-
-	spin_lock_irq(&rtc_lock);
-
-	if (hpet_rtc_dropped_irq()) {
-		spin_unlock_irq(&rtc_lock);
-		return;
-	}
-
-	/* Just in case someone disabled the timer from behind our back... */
-	if (rtc_status & RTC_TIMER_ON)
-		mod_timer(&rtc_irq_timer, jiffies + HZ/rtc_freq + 2*HZ/100);
-
-	rtc_irq_data += ((rtc_freq/HZ)<<8);
-	rtc_irq_data &= ~0xff;
-	rtc_irq_data |= (CMOS_READ(RTC_INTR_FLAGS) & 0xF0);	/* restart */
-
-	freq = rtc_freq;
-
-	spin_unlock_irq(&rtc_lock);
-
-	printk_ratelimited(KERN_WARNING "rtc: lost some interrupts at %ldHz.\n",
-			   freq);
-
-	/* Now we have new data */
-	wake_up_interruptible(&rtc_wait);
-
-	kill_fasync(&rtc_async_queue, SIGIO, POLL_IN);
-}
-#endif
-
-#ifdef CONFIG_PROC_FS
-/*
- *	Info exported via "/proc/driver/rtc".
- */
-
-static int rtc_proc_show(struct seq_file *seq, void *v)
-{
-#define YN(bit) ((ctrl & bit) ? "yes" : "no")
-#define NY(bit) ((ctrl & bit) ? "no" : "yes")
-	struct rtc_time tm;
-	unsigned char batt, ctrl;
-	unsigned long freq;
-
-	spin_lock_irq(&rtc_lock);
-	batt = CMOS_READ(RTC_VALID) & RTC_VRT;
-	ctrl = CMOS_READ(RTC_CONTROL);
-	freq = rtc_freq;
-	spin_unlock_irq(&rtc_lock);
-
-
-	rtc_get_rtc_time(&tm);
-
-	/*
-	 * There is no way to tell if the luser has the RTC set for local
-	 * time or for Universal Standard Time (GMT). Probably local though.
-	 */
-	seq_printf(seq,
-		   "rtc_time\t: %ptRt\n"
-		   "rtc_date\t: %ptRd\n"
-		   "rtc_epoch\t: %04lu\n",
-		   &tm, &tm, epoch);
-
-	get_rtc_alm_time(&tm);
-
-	/*
-	 * We implicitly assume 24hr mode here. Alarm values >= 0xc0 will
-	 * match any value for that particular field. Values that are
-	 * greater than a valid time, but less than 0xc0 shouldn't appear.
-	 */
-	seq_puts(seq, "alarm\t\t: ");
-	if (tm.tm_hour <= 24)
-		seq_printf(seq, "%02d:", tm.tm_hour);
-	else
-		seq_puts(seq, "**:");
-
-	if (tm.tm_min <= 59)
-		seq_printf(seq, "%02d:", tm.tm_min);
-	else
-		seq_puts(seq, "**:");
-
-	if (tm.tm_sec <= 59)
-		seq_printf(seq, "%02d\n", tm.tm_sec);
-	else
-		seq_puts(seq, "**\n");
-
-	seq_printf(seq,
-		   "DST_enable\t: %s\n"
-		   "BCD\t\t: %s\n"
-		   "24hr\t\t: %s\n"
-		   "square_wave\t: %s\n"
-		   "alarm_IRQ\t: %s\n"
-		   "update_IRQ\t: %s\n"
-		   "periodic_IRQ\t: %s\n"
-		   "periodic_freq\t: %ld\n"
-		   "batt_status\t: %s\n",
-		   YN(RTC_DST_EN),
-		   NY(RTC_DM_BINARY),
-		   YN(RTC_24H),
-		   YN(RTC_SQWE),
-		   YN(RTC_AIE),
-		   YN(RTC_UIE),
-		   YN(RTC_PIE),
-		   freq,
-		   batt ? "okay" : "dead");
-
-	return  0;
-#undef YN
-#undef NY
-}
-#endif
-
-static void rtc_get_rtc_time(struct rtc_time *rtc_tm)
-{
-	unsigned long uip_watchdog = jiffies, flags;
-	unsigned char ctrl;
-#ifdef CONFIG_MACH_DECSTATION
-	unsigned int real_year;
-#endif
-
-	/*
-	 * read RTC once any update in progress is done. The update
-	 * can take just over 2ms. We wait 20ms. There is no need to
-	 * to poll-wait (up to 1s - eeccch) for the falling edge of RTC_UIP.
-	 * If you need to know *exactly* when a second has started, enable
-	 * periodic update complete interrupts, (via ioctl) and then
-	 * immediately read /dev/rtc which will block until you get the IRQ.
-	 * Once the read clears, read the RTC time (again via ioctl). Easy.
-	 */
-
-	while (rtc_is_updating() != 0 &&
-	       time_before(jiffies, uip_watchdog + 2*HZ/100))
-		cpu_relax();
-
-	/*
-	 * Only the values that we read from the RTC are set. We leave
-	 * tm_wday, tm_yday and tm_isdst untouched. Note that while the
-	 * RTC has RTC_DAY_OF_WEEK, we should usually ignore it, as it is
-	 * only updated by the RTC when initially set to a non-zero value.
-	 */
-	spin_lock_irqsave(&rtc_lock, flags);
-	rtc_tm->tm_sec = CMOS_READ(RTC_SECONDS);
-	rtc_tm->tm_min = CMOS_READ(RTC_MINUTES);
-	rtc_tm->tm_hour = CMOS_READ(RTC_HOURS);
-	rtc_tm->tm_mday = CMOS_READ(RTC_DAY_OF_MONTH);
-	rtc_tm->tm_mon = CMOS_READ(RTC_MONTH);
-	rtc_tm->tm_year = CMOS_READ(RTC_YEAR);
-	/* Only set from 2.6.16 onwards */
-	rtc_tm->tm_wday = CMOS_READ(RTC_DAY_OF_WEEK);
-
-#ifdef CONFIG_MACH_DECSTATION
-	real_year = CMOS_READ(RTC_DEC_YEAR);
-#endif
-	ctrl = CMOS_READ(RTC_CONTROL);
-	spin_unlock_irqrestore(&rtc_lock, flags);
-
-	if (!(ctrl & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-		rtc_tm->tm_sec = bcd2bin(rtc_tm->tm_sec);
-		rtc_tm->tm_min = bcd2bin(rtc_tm->tm_min);
-		rtc_tm->tm_hour = bcd2bin(rtc_tm->tm_hour);
-		rtc_tm->tm_mday = bcd2bin(rtc_tm->tm_mday);
-		rtc_tm->tm_mon = bcd2bin(rtc_tm->tm_mon);
-		rtc_tm->tm_year = bcd2bin(rtc_tm->tm_year);
-		rtc_tm->tm_wday = bcd2bin(rtc_tm->tm_wday);
-	}
-
-#ifdef CONFIG_MACH_DECSTATION
-	rtc_tm->tm_year += real_year - 72;
-#endif
-
-	/*
-	 * Account for differences between how the RTC uses the values
-	 * and how they are defined in a struct rtc_time;
-	 */
-	rtc_tm->tm_year += epoch - 1900;
-	if (rtc_tm->tm_year <= 69)
-		rtc_tm->tm_year += 100;
-
-	rtc_tm->tm_mon--;
-}
-
-static void get_rtc_alm_time(struct rtc_time *alm_tm)
-{
-	unsigned char ctrl;
-
-	/*
-	 * Only the values that we read from the RTC are set. That
-	 * means only tm_hour, tm_min, and tm_sec.
-	 */
-	spin_lock_irq(&rtc_lock);
-	alm_tm->tm_sec = CMOS_READ(RTC_SECONDS_ALARM);
-	alm_tm->tm_min = CMOS_READ(RTC_MINUTES_ALARM);
-	alm_tm->tm_hour = CMOS_READ(RTC_HOURS_ALARM);
-	ctrl = CMOS_READ(RTC_CONTROL);
-	spin_unlock_irq(&rtc_lock);
-
-	if (!(ctrl & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-		alm_tm->tm_sec = bcd2bin(alm_tm->tm_sec);
-		alm_tm->tm_min = bcd2bin(alm_tm->tm_min);
-		alm_tm->tm_hour = bcd2bin(alm_tm->tm_hour);
-	}
-}
-
-#ifdef RTC_IRQ
-/*
- * Used to disable/enable interrupts for any one of UIE, AIE, PIE.
- * Rumour has it that if you frob the interrupt enable/disable
- * bits in RTC_CONTROL, you should read RTC_INTR_FLAGS, to
- * ensure you actually start getting interrupts. Probably for
- * compatibility with older/broken chipset RTC implementations.
- * We also clear out any old irq data after an ioctl() that
- * meddles with the interrupt enable/disable bits.
- */
-
-static void mask_rtc_irq_bit_locked(unsigned char bit)
-{
-	unsigned char val;
-
-	if (hpet_mask_rtc_irq_bit(bit))
-		return;
-	val = CMOS_READ(RTC_CONTROL);
-	val &=  ~bit;
-	CMOS_WRITE(val, RTC_CONTROL);
-	CMOS_READ(RTC_INTR_FLAGS);
-
-	rtc_irq_data = 0;
-}
-
-static void set_rtc_irq_bit_locked(unsigned char bit)
-{
-	unsigned char val;
-
-	if (hpet_set_rtc_irq_bit(bit))
-		return;
-	val = CMOS_READ(RTC_CONTROL);
-	val |= bit;
-	CMOS_WRITE(val, RTC_CONTROL);
-	CMOS_READ(RTC_INTR_FLAGS);
-
-	rtc_irq_data = 0;
-}
-#endif
-
-MODULE_AUTHOR("Paul Gortmaker");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_MISCDEV(RTC_MINOR);
diff --git a/drivers/char/toshiba.c b/drivers/char/toshiba.c
index 98f3150..aff0a8e 100644
--- a/drivers/char/toshiba.c
+++ b/drivers/char/toshiba.c
@@ -61,8 +61,6 @@
 #include <linux/mutex.h>
 #include <linux/toshiba.h>
 
-#define TOSH_MINOR_DEV 181
-
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Jonathan Buzzard <jonathan@buzzard.org.uk>");
 MODULE_DESCRIPTION("Toshiba laptop SMM driver");
diff --git a/drivers/char/tpm/tpm-chip.c b/drivers/char/tpm/tpm-chip.c
index 5807383..8c77e88 100644
--- a/drivers/char/tpm/tpm-chip.c
+++ b/drivers/char/tpm/tpm-chip.c
@@ -514,15 +514,15 @@ static int tpm_add_legacy_sysfs(struct tpm_chip *chip)
 	if (chip->flags & (TPM_CHIP_FLAG_TPM2 | TPM_CHIP_FLAG_VIRTUAL))
 		return 0;
 
-	rc = __compat_only_sysfs_link_entry_to_kobj(
-		    &chip->dev.parent->kobj, &chip->dev.kobj, "ppi");
+	rc = compat_only_sysfs_link_entry_to_kobj(
+		    &chip->dev.parent->kobj, &chip->dev.kobj, "ppi", NULL);
 	if (rc && rc != -ENOENT)
 		return rc;
 
 	/* All the names from tpm-sysfs */
 	for (i = chip->groups[0]->attrs; *i != NULL; ++i) {
-		rc = __compat_only_sysfs_link_entry_to_kobj(
-		    &chip->dev.parent->kobj, &chip->dev.kobj, (*i)->name);
+		rc = compat_only_sysfs_link_entry_to_kobj(
+		    &chip->dev.parent->kobj, &chip->dev.kobj, (*i)->name, NULL);
 		if (rc) {
 			tpm_del_legacy_sysfs(chip);
 			return rc;
diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index 4df9b40..3cbaec9 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -112,7 +112,7 @@ struct port_buffer {
 	unsigned int sgpages;
 
 	/* sg is used if spages > 0. sg must be the last in is struct */
-	struct scatterlist sg[0];
+	struct scatterlist sg[];
 };
 
 /*
diff --git a/drivers/clk/at91/Makefile b/drivers/clk/at91/Makefile
index 3732241..8b90357 100644
--- a/drivers/clk/at91/Makefile
+++ b/drivers/clk/at91/Makefile
@@ -15,7 +15,11 @@
 obj-$(CONFIG_HAVE_AT91_GENERATED_CLK)	+= clk-generated.o
 obj-$(CONFIG_HAVE_AT91_I2S_MUX_CLK)	+= clk-i2s-mux.o
 obj-$(CONFIG_HAVE_AT91_SAM9X60_PLL)	+= clk-sam9x60-pll.o
+obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o
 obj-$(CONFIG_SOC_AT91SAM9) += at91sam9260.o at91sam9rl.o at91sam9x5.o
+obj-$(CONFIG_SOC_AT91SAM9) += at91sam9g45.o
+obj-$(CONFIG_SOC_AT91SAM9) += at91sam9n12.o at91sam9x5.o
 obj-$(CONFIG_SOC_SAM9X60) += sam9x60.o
+obj-$(CONFIG_SOC_SAMA5D3) += sama5d3.o
 obj-$(CONFIG_SOC_SAMA5D4) += sama5d4.o
 obj-$(CONFIG_SOC_SAMA5D2) += sama5d2.o
diff --git a/drivers/clk/at91/at91rm9200.c b/drivers/clk/at91/at91rm9200.c
new file mode 100644
index 0000000..c44a431
--- /dev/null
+++ b/drivers/clk/at91/at91rm9200.c
@@ -0,0 +1,199 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/clk-provider.h>
+#include <linux/mfd/syscon.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/clock/at91.h>
+
+#include "pmc.h"
+
+struct sck {
+	char *n;
+	char *p;
+	u8 id;
+};
+
+struct pck {
+	char *n;
+	u8 id;
+};
+
+static const struct clk_master_characteristics rm9200_mck_characteristics = {
+	.output = { .min = 0, .max = 80000000 },
+	.divisors = { 1, 2, 3, 4 },
+};
+
+static u8 rm9200_pll_out[] = { 0, 2 };
+
+static const struct clk_range rm9200_pll_outputs[] = {
+	{ .min = 80000000, .max = 160000000 },
+	{ .min = 150000000, .max = 180000000 },
+};
+
+static const struct clk_pll_characteristics rm9200_pll_characteristics = {
+	.input = { .min = 1000000, .max = 32000000 },
+	.num_output = ARRAY_SIZE(rm9200_pll_outputs),
+	.output = rm9200_pll_outputs,
+	.out = rm9200_pll_out,
+};
+
+static const struct sck at91rm9200_systemck[] = {
+	{ .n = "udpck", .p = "usbck",    .id = 2 },
+	{ .n = "uhpck", .p = "usbck",    .id = 4 },
+	{ .n = "pck0",  .p = "prog0",    .id = 8 },
+	{ .n = "pck1",  .p = "prog1",    .id = 9 },
+	{ .n = "pck2",  .p = "prog2",    .id = 10 },
+	{ .n = "pck3",  .p = "prog3",    .id = 11 },
+};
+
+static const struct pck at91rm9200_periphck[] = {
+	{ .n = "pioA_clk",   .id = 2 },
+	{ .n = "pioB_clk",   .id = 3 },
+	{ .n = "pioC_clk",   .id = 4 },
+	{ .n = "pioD_clk",   .id = 5 },
+	{ .n = "usart0_clk", .id = 6 },
+	{ .n = "usart1_clk", .id = 7 },
+	{ .n = "usart2_clk", .id = 8 },
+	{ .n = "usart3_clk", .id = 9 },
+	{ .n = "mci0_clk",   .id = 10 },
+	{ .n = "udc_clk",    .id = 11 },
+	{ .n = "twi0_clk",   .id = 12 },
+	{ .n = "spi0_clk",   .id = 13 },
+	{ .n = "ssc0_clk",   .id = 14 },
+	{ .n = "ssc1_clk",   .id = 15 },
+	{ .n = "ssc2_clk",   .id = 16 },
+	{ .n = "tc0_clk",    .id = 17 },
+	{ .n = "tc1_clk",    .id = 18 },
+	{ .n = "tc2_clk",    .id = 19 },
+	{ .n = "tc3_clk",    .id = 20 },
+	{ .n = "tc4_clk",    .id = 21 },
+	{ .n = "tc5_clk",    .id = 22 },
+	{ .n = "ohci_clk",   .id = 23 },
+	{ .n = "macb0_clk",  .id = 24 },
+};
+
+static void __init at91rm9200_pmc_setup(struct device_node *np)
+{
+	const char *slowxtal_name, *mainxtal_name;
+	struct pmc_data *at91rm9200_pmc;
+	u32 usb_div[] = { 1, 2, 0, 0 };
+	const char *parent_names[6];
+	struct regmap *regmap;
+	struct clk_hw *hw;
+	int i;
+	bool bypass;
+
+	i = of_property_match_string(np, "clock-names", "slow_xtal");
+	if (i < 0)
+		return;
+
+	slowxtal_name = of_clk_get_parent_name(np, i);
+
+	i = of_property_match_string(np, "clock-names", "main_xtal");
+	if (i < 0)
+		return;
+	mainxtal_name = of_clk_get_parent_name(np, i);
+
+	regmap = device_node_to_regmap(np);
+	if (IS_ERR(regmap))
+		return;
+
+	at91rm9200_pmc = pmc_data_allocate(PMC_MAIN + 1,
+					    nck(at91rm9200_systemck),
+					    nck(at91rm9200_periphck), 0);
+	if (!at91rm9200_pmc)
+		return;
+
+	bypass = of_property_read_bool(np, "atmel,osc-bypass");
+
+	hw = at91_clk_register_main_osc(regmap, "main_osc", mainxtal_name,
+					bypass);
+	if (IS_ERR(hw))
+		goto err_free;
+
+	hw = at91_clk_register_rm9200_main(regmap, "mainck", "main_osc");
+	if (IS_ERR(hw))
+		goto err_free;
+
+	at91rm9200_pmc->chws[PMC_MAIN] = hw;
+
+	hw = at91_clk_register_pll(regmap, "pllack", "mainck", 0,
+				   &at91rm9200_pll_layout,
+				   &rm9200_pll_characteristics);
+	if (IS_ERR(hw))
+		goto err_free;
+
+	hw = at91_clk_register_pll(regmap, "pllbck", "mainck", 1,
+				   &at91rm9200_pll_layout,
+				   &rm9200_pll_characteristics);
+	if (IS_ERR(hw))
+		goto err_free;
+
+	parent_names[0] = slowxtal_name;
+	parent_names[1] = "mainck";
+	parent_names[2] = "pllack";
+	parent_names[3] = "pllbck";
+	hw = at91_clk_register_master(regmap, "masterck", 4, parent_names,
+				      &at91rm9200_master_layout,
+				      &rm9200_mck_characteristics);
+	if (IS_ERR(hw))
+		goto err_free;
+
+	at91rm9200_pmc->chws[PMC_MCK] = hw;
+
+	hw = at91rm9200_clk_register_usb(regmap, "usbck", "pllbck", usb_div);
+	if (IS_ERR(hw))
+		goto err_free;
+
+	parent_names[0] = slowxtal_name;
+	parent_names[1] = "mainck";
+	parent_names[2] = "pllack";
+	parent_names[3] = "pllbck";
+	for (i = 0; i < 4; i++) {
+		char name[6];
+
+		snprintf(name, sizeof(name), "prog%d", i);
+
+		hw = at91_clk_register_programmable(regmap, name,
+						    parent_names, 4, i,
+						    &at91rm9200_programmable_layout);
+		if (IS_ERR(hw))
+			goto err_free;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(at91rm9200_systemck); i++) {
+		hw = at91_clk_register_system(regmap, at91rm9200_systemck[i].n,
+					      at91rm9200_systemck[i].p,
+					      at91rm9200_systemck[i].id);
+		if (IS_ERR(hw))
+			goto err_free;
+
+		at91rm9200_pmc->shws[at91rm9200_systemck[i].id] = hw;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(at91rm9200_periphck); i++) {
+		hw = at91_clk_register_peripheral(regmap,
+						  at91rm9200_periphck[i].n,
+						  "masterck",
+						  at91rm9200_periphck[i].id);
+		if (IS_ERR(hw))
+			goto err_free;
+
+		at91rm9200_pmc->phws[at91rm9200_periphck[i].id] = hw;
+	}
+
+	of_clk_add_hw_provider(np, of_clk_hw_pmc_get, at91rm9200_pmc);
+
+	return;
+
+err_free:
+	pmc_data_free(at91rm9200_pmc);
+}
+/*
+ * While the TCB can be used as the clocksource, the system timer is most likely
+ * to be used instead. However, the pinctrl driver doesn't support probe
+ * deferring properly. Once this is fixed, this can be switched to a platform
+ * driver.
+ */
+CLK_OF_DECLARE_DRIVER(at91rm9200_pmc, "atmel,at91rm9200-pmc",
+		      at91rm9200_pmc_setup);
diff --git a/drivers/clk/at91/at91sam9g45.c b/drivers/clk/at91/at91sam9g45.c
new file mode 100644
index 0000000..38a7d2d
--- /dev/null
+++ b/drivers/clk/at91/at91sam9g45.c
@@ -0,0 +1,220 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/clk-provider.h>
+#include <linux/mfd/syscon.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/clock/at91.h>
+
+#include "pmc.h"
+
+static const struct clk_master_characteristics mck_characteristics = {
+	.output = { .min = 0, .max = 133333333 },
+	.divisors = { 1, 2, 4, 3 },
+};
+
+static u8 plla_out[] = { 0, 1, 2, 3, 0, 1, 2, 3 };
+
+static u16 plla_icpll[] = { 0, 0, 0, 0, 1, 1, 1, 1 };
+
+static const struct clk_range plla_outputs[] = {
+	{ .min = 745000000, .max = 800000000 },
+	{ .min = 695000000, .max = 750000000 },
+	{ .min = 645000000, .max = 700000000 },
+	{ .min = 595000000, .max = 650000000 },
+	{ .min = 545000000, .max = 600000000 },
+	{ .min = 495000000, .max = 555000000 },
+	{ .min = 445000000, .max = 500000000 },
+	{ .min = 400000000, .max = 450000000 },
+};
+
+static const struct clk_pll_characteristics plla_characteristics = {
+	.input = { .min = 2000000, .max = 32000000 },
+	.num_output = ARRAY_SIZE(plla_outputs),
+	.output = plla_outputs,
+	.icpll = plla_icpll,
+	.out = plla_out,
+};
+
+static const struct {
+	char *n;
+	char *p;
+	u8 id;
+} at91sam9g45_systemck[] = {
+	{ .n = "ddrck", .p = "masterck", .id = 2 },
+	{ .n = "uhpck", .p = "usbck",    .id = 6 },
+	{ .n = "pck0",  .p = "prog0",    .id = 8 },
+	{ .n = "pck1",  .p = "prog1",    .id = 9 },
+};
+
+static const struct clk_pcr_layout at91sam9g45_pcr_layout = {
+	.offset = 0x10c,
+	.cmd = BIT(12),
+	.pid_mask = GENMASK(5, 0),
+	.div_mask = GENMASK(17, 16),
+};
+
+struct pck {
+	char *n;
+	u8 id;
+};
+
+static const struct pck at91sam9g45_periphck[] = {
+	{ .n = "pioA_clk",       .id = 2, },
+	{ .n = "pioB_clk",       .id = 3, },
+	{ .n = "pioC_clk",       .id = 4, },
+	{ .n = "pioDE_clk",      .id = 5, },
+	{ .n = "trng_clk",       .id = 6, },
+	{ .n = "usart0_clk",     .id = 7, },
+	{ .n = "usart1_clk",     .id = 8, },
+	{ .n = "usart2_clk",     .id = 9, },
+	{ .n = "usart3_clk",     .id = 10, },
+	{ .n = "mci0_clk",       .id = 11, },
+	{ .n = "twi0_clk",       .id = 12, },
+	{ .n = "twi1_clk",       .id = 13, },
+	{ .n = "spi0_clk",       .id = 14, },
+	{ .n = "spi1_clk",       .id = 15, },
+	{ .n = "ssc0_clk",       .id = 16, },
+	{ .n = "ssc1_clk",       .id = 17, },
+	{ .n = "tcb0_clk",       .id = 18, },
+	{ .n = "pwm_clk",        .id = 19, },
+	{ .n = "adc_clk",        .id = 20, },
+	{ .n = "dma0_clk",       .id = 21, },
+	{ .n = "uhphs_clk",      .id = 22, },
+	{ .n = "lcd_clk",        .id = 23, },
+	{ .n = "ac97_clk",       .id = 24, },
+	{ .n = "macb0_clk",      .id = 25, },
+	{ .n = "isi_clk",        .id = 26, },
+	{ .n = "udphs_clk",      .id = 27, },
+	{ .n = "aestdessha_clk", .id = 28, },
+	{ .n = "mci1_clk",       .id = 29, },
+	{ .n = "vdec_clk",       .id = 30, },
+};
+
+static void __init at91sam9g45_pmc_setup(struct device_node *np)
+{
+	const char *slck_name, *mainxtal_name;
+	struct pmc_data *at91sam9g45_pmc;
+	const char *parent_names[6];
+	struct regmap *regmap;
+	struct clk_hw *hw;
+	int i;
+	bool bypass;
+
+	i = of_property_match_string(np, "clock-names", "slow_clk");
+	if (i < 0)
+		return;
+
+	slck_name = of_clk_get_parent_name(np, i);
+
+	i = of_property_match_string(np, "clock-names", "main_xtal");
+	if (i < 0)
+		return;
+	mainxtal_name = of_clk_get_parent_name(np, i);
+
+	regmap = syscon_node_to_regmap(np);
+	if (IS_ERR(regmap))
+		return;
+
+	at91sam9g45_pmc = pmc_data_allocate(PMC_MAIN + 1,
+					    nck(at91sam9g45_systemck),
+					    nck(at91sam9g45_periphck), 0);
+	if (!at91sam9g45_pmc)
+		return;
+
+	bypass = of_property_read_bool(np, "atmel,osc-bypass");
+
+	hw = at91_clk_register_main_osc(regmap, "main_osc", mainxtal_name,
+					bypass);
+	if (IS_ERR(hw))
+		goto err_free;
+
+	hw = at91_clk_register_rm9200_main(regmap, "mainck", "main_osc");
+	if (IS_ERR(hw))
+		goto err_free;
+
+	at91sam9g45_pmc->chws[PMC_MAIN] = hw;
+
+	hw = at91_clk_register_pll(regmap, "pllack", "mainck", 0,
+				   &at91rm9200_pll_layout, &plla_characteristics);
+	if (IS_ERR(hw))
+		goto err_free;
+
+	hw = at91_clk_register_plldiv(regmap, "plladivck", "pllack");
+	if (IS_ERR(hw))
+		goto err_free;
+
+	hw = at91_clk_register_utmi(regmap, NULL, "utmick", "mainck");
+	if (IS_ERR(hw))
+		goto err_free;
+
+	at91sam9g45_pmc->chws[PMC_UTMI] = hw;
+
+	parent_names[0] = slck_name;
+	parent_names[1] = "mainck";
+	parent_names[2] = "plladivck";
+	parent_names[3] = "utmick";
+	hw = at91_clk_register_master(regmap, "masterck", 4, parent_names,
+				      &at91rm9200_master_layout,
+				      &mck_characteristics);
+	if (IS_ERR(hw))
+		goto err_free;
+
+	at91sam9g45_pmc->chws[PMC_MCK] = hw;
+
+	parent_names[0] = "plladivck";
+	parent_names[1] = "utmick";
+	hw = at91sam9x5_clk_register_usb(regmap, "usbck", parent_names, 2);
+	if (IS_ERR(hw))
+		goto err_free;
+
+	parent_names[0] = slck_name;
+	parent_names[1] = "mainck";
+	parent_names[2] = "plladivck";
+	parent_names[3] = "utmick";
+	parent_names[4] = "masterck";
+	for (i = 0; i < 2; i++) {
+		char name[6];
+
+		snprintf(name, sizeof(name), "prog%d", i);
+
+		hw = at91_clk_register_programmable(regmap, name,
+						    parent_names, 5, i,
+						    &at91sam9g45_programmable_layout);
+		if (IS_ERR(hw))
+			goto err_free;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(at91sam9g45_systemck); i++) {
+		hw = at91_clk_register_system(regmap, at91sam9g45_systemck[i].n,
+					      at91sam9g45_systemck[i].p,
+					      at91sam9g45_systemck[i].id);
+		if (IS_ERR(hw))
+			goto err_free;
+
+		at91sam9g45_pmc->shws[at91sam9g45_systemck[i].id] = hw;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(at91sam9g45_periphck); i++) {
+		hw = at91_clk_register_peripheral(regmap,
+						  at91sam9g45_periphck[i].n,
+						  "masterck",
+						  at91sam9g45_periphck[i].id);
+		if (IS_ERR(hw))
+			goto err_free;
+
+		at91sam9g45_pmc->phws[at91sam9g45_periphck[i].id] = hw;
+	}
+
+	of_clk_add_hw_provider(np, of_clk_hw_pmc_get, at91sam9g45_pmc);
+
+	return;
+
+err_free:
+	pmc_data_free(at91sam9g45_pmc);
+}
+/*
+ * The TCB is used as the clocksource so its clock is needed early. This means
+ * this can't be a platform driver.
+ */
+CLK_OF_DECLARE_DRIVER(at91sam9g45_pmc, "atmel,at91sam9g45-pmc",
+		      at91sam9g45_pmc_setup);
diff --git a/drivers/clk/at91/at91sam9n12.c b/drivers/clk/at91/at91sam9n12.c
new file mode 100644
index 0000000..8bb39d2
--- /dev/null
+++ b/drivers/clk/at91/at91sam9n12.c
@@ -0,0 +1,238 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/clk-provider.h>
+#include <linux/mfd/syscon.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/clock/at91.h>
+
+#include "pmc.h"
+
+static const struct clk_master_characteristics mck_characteristics = {
+	.output = { .min = 0, .max = 133333333 },
+	.divisors = { 1, 2, 4, 3 },
+	.have_div3_pres = 1,
+};
+
+static u8 plla_out[] = { 0, 1, 2, 3, 0, 1, 2, 3 };
+
+static u16 plla_icpll[] = { 0, 0, 0, 0, 1, 1, 1, 1 };
+
+static const struct clk_range plla_outputs[] = {
+	{ .min = 745000000, .max = 800000000 },
+	{ .min = 695000000, .max = 750000000 },
+	{ .min = 645000000, .max = 700000000 },
+	{ .min = 595000000, .max = 650000000 },
+	{ .min = 545000000, .max = 600000000 },
+	{ .min = 495000000, .max = 555000000 },
+	{ .min = 445000000, .max = 500000000 },
+	{ .min = 400000000, .max = 450000000 },
+};
+
+static const struct clk_pll_characteristics plla_characteristics = {
+	.input = { .min = 2000000, .max = 32000000 },
+	.num_output = ARRAY_SIZE(plla_outputs),
+	.output = plla_outputs,
+	.icpll = plla_icpll,
+	.out = plla_out,
+};
+
+static u8 pllb_out[] = { 0 };
+
+static const struct clk_range pllb_outputs[] = {
+	{ .min = 30000000, .max = 100000000 },
+};
+
+static const struct clk_pll_characteristics pllb_characteristics = {
+	.input = { .min = 2000000, .max = 32000000 },
+	.num_output = ARRAY_SIZE(pllb_outputs),
+	.output = pllb_outputs,
+	.out = pllb_out,
+};
+
+static const struct {
+	char *n;
+	char *p;
+	u8 id;
+} at91sam9n12_systemck[] = {
+	{ .n = "ddrck", .p = "masterck", .id = 2 },
+	{ .n = "lcdck", .p = "masterck", .id = 3 },
+	{ .n = "uhpck", .p = "usbck",    .id = 6 },
+	{ .n = "udpck", .p = "usbck",    .id = 7 },
+	{ .n = "pck0",  .p = "prog0",    .id = 8 },
+	{ .n = "pck1",  .p = "prog1",    .id = 9 },
+};
+
+static const struct clk_pcr_layout at91sam9n12_pcr_layout = {
+	.offset = 0x10c,
+	.cmd = BIT(12),
+	.pid_mask = GENMASK(5, 0),
+	.div_mask = GENMASK(17, 16),
+};
+
+struct pck {
+	char *n;
+	u8 id;
+};
+
+static const struct pck at91sam9n12_periphck[] = {
+	{ .n = "pioAB_clk",  .id = 2, },
+	{ .n = "pioCD_clk",  .id = 3, },
+	{ .n = "fuse_clk",   .id = 4, },
+	{ .n = "usart0_clk", .id = 5, },
+	{ .n = "usart1_clk", .id = 6, },
+	{ .n = "usart2_clk", .id = 7, },
+	{ .n = "usart3_clk", .id = 8, },
+	{ .n = "twi0_clk",   .id = 9, },
+	{ .n = "twi1_clk",   .id = 10, },
+	{ .n = "mci0_clk",   .id = 12, },
+	{ .n = "spi0_clk",   .id = 13, },
+	{ .n = "spi1_clk",   .id = 14, },
+	{ .n = "uart0_clk",  .id = 15, },
+	{ .n = "uart1_clk",  .id = 16, },
+	{ .n = "tcb_clk",    .id = 17, },
+	{ .n = "pwm_clk",    .id = 18, },
+	{ .n = "adc_clk",    .id = 19, },
+	{ .n = "dma0_clk",   .id = 20, },
+	{ .n = "uhphs_clk",  .id = 22, },
+	{ .n = "udphs_clk",  .id = 23, },
+	{ .n = "lcdc_clk",   .id = 25, },
+	{ .n = "sha_clk",    .id = 27, },
+	{ .n = "ssc0_clk",   .id = 28, },
+	{ .n = "aes_clk",    .id = 29, },
+	{ .n = "trng_clk",   .id = 30, },
+};
+
+static void __init at91sam9n12_pmc_setup(struct device_node *np)
+{
+	struct clk_range range = CLK_RANGE(0, 0);
+	const char *slck_name, *mainxtal_name;
+	struct pmc_data *at91sam9n12_pmc;
+	const char *parent_names[6];
+	struct regmap *regmap;
+	struct clk_hw *hw;
+	int i;
+	bool bypass;
+
+	i = of_property_match_string(np, "clock-names", "slow_clk");
+	if (i < 0)
+		return;
+
+	slck_name = of_clk_get_parent_name(np, i);
+
+	i = of_property_match_string(np, "clock-names", "main_xtal");
+	if (i < 0)
+		return;
+	mainxtal_name = of_clk_get_parent_name(np, i);
+
+	regmap = syscon_node_to_regmap(np);
+	if (IS_ERR(regmap))
+		return;
+
+	at91sam9n12_pmc = pmc_data_allocate(PMC_MAIN + 1,
+					   nck(at91sam9n12_systemck), 31, 0);
+	if (!at91sam9n12_pmc)
+		return;
+
+	hw = at91_clk_register_main_rc_osc(regmap, "main_rc_osc", 12000000,
+					   50000000);
+	if (IS_ERR(hw))
+		goto err_free;
+
+	bypass = of_property_read_bool(np, "atmel,osc-bypass");
+
+	hw = at91_clk_register_main_osc(regmap, "main_osc", mainxtal_name,
+					bypass);
+	if (IS_ERR(hw))
+		goto err_free;
+
+	parent_names[0] = "main_rc_osc";
+	parent_names[1] = "main_osc";
+	hw = at91_clk_register_sam9x5_main(regmap, "mainck", parent_names, 2);
+	if (IS_ERR(hw))
+		goto err_free;
+
+	at91sam9n12_pmc->chws[PMC_MAIN] = hw;
+
+	hw = at91_clk_register_pll(regmap, "pllack", "mainck", 0,
+				   &at91rm9200_pll_layout, &plla_characteristics);
+	if (IS_ERR(hw))
+		goto err_free;
+
+	hw = at91_clk_register_plldiv(regmap, "plladivck", "pllack");
+	if (IS_ERR(hw))
+		goto err_free;
+
+	hw = at91_clk_register_pll(regmap, "pllbck", "mainck", 1,
+				   &at91rm9200_pll_layout, &pllb_characteristics);
+	if (IS_ERR(hw))
+		goto err_free;
+
+	parent_names[0] = slck_name;
+	parent_names[1] = "mainck";
+	parent_names[2] = "plladivck";
+	parent_names[3] = "pllbck";
+	hw = at91_clk_register_master(regmap, "masterck", 4, parent_names,
+				      &at91sam9x5_master_layout,
+				      &mck_characteristics);
+	if (IS_ERR(hw))
+		goto err_free;
+
+	at91sam9n12_pmc->chws[PMC_MCK] = hw;
+
+	hw = at91sam9n12_clk_register_usb(regmap, "usbck", "pllbck");
+	if (IS_ERR(hw))
+		goto err_free;
+
+	parent_names[0] = slck_name;
+	parent_names[1] = "mainck";
+	parent_names[2] = "plladivck";
+	parent_names[3] = "pllbck";
+	parent_names[4] = "masterck";
+	for (i = 0; i < 2; i++) {
+		char name[6];
+
+		snprintf(name, sizeof(name), "prog%d", i);
+
+		hw = at91_clk_register_programmable(regmap, name,
+						    parent_names, 5, i,
+						    &at91sam9x5_programmable_layout);
+		if (IS_ERR(hw))
+			goto err_free;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(at91sam9n12_systemck); i++) {
+		hw = at91_clk_register_system(regmap, at91sam9n12_systemck[i].n,
+					      at91sam9n12_systemck[i].p,
+					      at91sam9n12_systemck[i].id);
+		if (IS_ERR(hw))
+			goto err_free;
+
+		at91sam9n12_pmc->shws[at91sam9n12_systemck[i].id] = hw;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(at91sam9n12_periphck); i++) {
+		hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock,
+							 &at91sam9n12_pcr_layout,
+							 at91sam9n12_periphck[i].n,
+							 "masterck",
+							 at91sam9n12_periphck[i].id,
+							 &range);
+		if (IS_ERR(hw))
+			goto err_free;
+
+		at91sam9n12_pmc->phws[at91sam9n12_periphck[i].id] = hw;
+	}
+
+	of_clk_add_hw_provider(np, of_clk_hw_pmc_get, at91sam9n12_pmc);
+
+	return;
+
+err_free:
+	pmc_data_free(at91sam9n12_pmc);
+}
+/*
+ * The TCB is used as the clocksource so its clock is needed early. This means
+ * this can't be a platform driver.
+ */
+CLK_OF_DECLARE_DRIVER(at91sam9n12_pmc, "atmel,at91sam9n12-pmc",
+		      at91sam9n12_pmc_setup);
diff --git a/drivers/clk/at91/clk-sam9x60-pll.c b/drivers/clk/at91/clk-sam9x60-pll.c
index dfb354a..e699803 100644
--- a/drivers/clk/at91/clk-sam9x60-pll.c
+++ b/drivers/clk/at91/clk-sam9x60-pll.c
@@ -14,27 +14,8 @@
 
 #include "pmc.h"
 
-#define PMC_PLL_CTRL0	0xc
-#define		PMC_PLL_CTRL0_DIV_MSK		GENMASK(7, 0)
-#define		PMC_PLL_CTRL0_ENPLL		BIT(28)
-#define		PMC_PLL_CTRL0_ENPLLCK		BIT(29)
-#define		PMC_PLL_CTRL0_ENLOCK		BIT(31)
-
-#define PMC_PLL_CTRL1	0x10
-#define		PMC_PLL_CTRL1_FRACR_MSK		GENMASK(21, 0)
-#define		PMC_PLL_CTRL1_MUL_MSK		GENMASK(30, 24)
-
-#define PMC_PLL_ACR	0x18
-#define		PMC_PLL_ACR_DEFAULT_UPLL	0x12020010UL
-#define		PMC_PLL_ACR_DEFAULT_PLLA	0x00020010UL
-#define		PMC_PLL_ACR_UTMIVR		BIT(12)
-#define		PMC_PLL_ACR_UTMIBG		BIT(13)
-#define		PMC_PLL_ACR_LOOP_FILTER_MSK	GENMASK(31, 24)
-
-#define PMC_PLL_UPDT	0x1c
-#define		PMC_PLL_UPDT_UPDATE		BIT(8)
-
-#define PMC_PLL_ISR0	0xec
+#define	PMC_PLL_CTRL0_DIV_MSK	GENMASK(7, 0)
+#define	PMC_PLL_CTRL1_MUL_MSK	GENMASK(30, 24)
 
 #define PLL_DIV_MAX		(FIELD_GET(PMC_PLL_CTRL0_DIV_MSK, UINT_MAX) + 1)
 #define UPLL_DIV		2
@@ -59,7 +40,7 @@ static inline bool sam9x60_pll_ready(struct regmap *regmap, int id)
 {
 	unsigned int status;
 
-	regmap_read(regmap, PMC_PLL_ISR0, &status);
+	regmap_read(regmap, AT91_PMC_PLL_ISR0, &status);
 
 	return !!(status & BIT(id));
 }
@@ -74,12 +55,12 @@ static int sam9x60_pll_prepare(struct clk_hw *hw)
 	u32 val;
 
 	spin_lock_irqsave(pll->lock, flags);
-	regmap_write(regmap, PMC_PLL_UPDT, pll->id);
+	regmap_write(regmap, AT91_PMC_PLL_UPDT, pll->id);
 
-	regmap_read(regmap, PMC_PLL_CTRL0, &val);
+	regmap_read(regmap, AT91_PMC_PLL_CTRL0, &val);
 	div = FIELD_GET(PMC_PLL_CTRL0_DIV_MSK, val);
 
-	regmap_read(regmap, PMC_PLL_CTRL1, &val);
+	regmap_read(regmap, AT91_PMC_PLL_CTRL1, &val);
 	mul = FIELD_GET(PMC_PLL_CTRL1_MUL_MSK, val);
 
 	if (sam9x60_pll_ready(regmap, pll->id) &&
@@ -88,39 +69,39 @@ static int sam9x60_pll_prepare(struct clk_hw *hw)
 		return 0;
 	}
 
-	/* Recommended value for PMC_PLL_ACR */
+	/* Recommended value for AT91_PMC_PLL_ACR */
 	if (pll->characteristics->upll)
-		val = PMC_PLL_ACR_DEFAULT_UPLL;
+		val = AT91_PMC_PLL_ACR_DEFAULT_UPLL;
 	else
-		val = PMC_PLL_ACR_DEFAULT_PLLA;
-	regmap_write(regmap, PMC_PLL_ACR, val);
+		val = AT91_PMC_PLL_ACR_DEFAULT_PLLA;
+	regmap_write(regmap, AT91_PMC_PLL_ACR, val);
 
-	regmap_write(regmap, PMC_PLL_CTRL1,
+	regmap_write(regmap, AT91_PMC_PLL_CTRL1,
 		     FIELD_PREP(PMC_PLL_CTRL1_MUL_MSK, pll->mul));
 
 	if (pll->characteristics->upll) {
 		/* Enable the UTMI internal bandgap */
-		val |= PMC_PLL_ACR_UTMIBG;
-		regmap_write(regmap, PMC_PLL_ACR, val);
+		val |= AT91_PMC_PLL_ACR_UTMIBG;
+		regmap_write(regmap, AT91_PMC_PLL_ACR, val);
 
 		udelay(10);
 
 		/* Enable the UTMI internal regulator */
-		val |= PMC_PLL_ACR_UTMIVR;
-		regmap_write(regmap, PMC_PLL_ACR, val);
+		val |= AT91_PMC_PLL_ACR_UTMIVR;
+		regmap_write(regmap, AT91_PMC_PLL_ACR, val);
 
 		udelay(10);
 	}
 
-	regmap_update_bits(regmap, PMC_PLL_UPDT,
-			   PMC_PLL_UPDT_UPDATE, PMC_PLL_UPDT_UPDATE);
+	regmap_update_bits(regmap, AT91_PMC_PLL_UPDT,
+			   AT91_PMC_PLL_UPDT_UPDATE, AT91_PMC_PLL_UPDT_UPDATE);
 
-	regmap_write(regmap, PMC_PLL_CTRL0,
-		     PMC_PLL_CTRL0_ENLOCK | PMC_PLL_CTRL0_ENPLL |
-		     PMC_PLL_CTRL0_ENPLLCK | pll->div);
+	regmap_write(regmap, AT91_PMC_PLL_CTRL0,
+		     AT91_PMC_PLL_CTRL0_ENLOCK | AT91_PMC_PLL_CTRL0_ENPLL |
+		     AT91_PMC_PLL_CTRL0_ENPLLCK | pll->div);
 
-	regmap_update_bits(regmap, PMC_PLL_UPDT,
-			   PMC_PLL_UPDT_UPDATE, PMC_PLL_UPDT_UPDATE);
+	regmap_update_bits(regmap, AT91_PMC_PLL_UPDT,
+			   AT91_PMC_PLL_UPDT_UPDATE, AT91_PMC_PLL_UPDT_UPDATE);
 
 	while (!sam9x60_pll_ready(regmap, pll->id))
 		cpu_relax();
@@ -144,22 +125,24 @@ static void sam9x60_pll_unprepare(struct clk_hw *hw)
 
 	spin_lock_irqsave(pll->lock, flags);
 
-	regmap_write(pll->regmap, PMC_PLL_UPDT, pll->id);
+	regmap_write(pll->regmap, AT91_PMC_PLL_UPDT, pll->id);
 
-	regmap_update_bits(pll->regmap, PMC_PLL_CTRL0,
-			   PMC_PLL_CTRL0_ENPLLCK, 0);
+	regmap_update_bits(pll->regmap, AT91_PMC_PLL_CTRL0,
+			   AT91_PMC_PLL_CTRL0_ENPLLCK, 0);
 
-	regmap_update_bits(pll->regmap, PMC_PLL_UPDT,
-			   PMC_PLL_UPDT_UPDATE, PMC_PLL_UPDT_UPDATE);
+	regmap_update_bits(pll->regmap, AT91_PMC_PLL_UPDT,
+			   AT91_PMC_PLL_UPDT_UPDATE, AT91_PMC_PLL_UPDT_UPDATE);
 
-	regmap_update_bits(pll->regmap, PMC_PLL_CTRL0, PMC_PLL_CTRL0_ENPLL, 0);
+	regmap_update_bits(pll->regmap, AT91_PMC_PLL_CTRL0,
+			   AT91_PMC_PLL_CTRL0_ENPLL, 0);
 
 	if (pll->characteristics->upll)
-		regmap_update_bits(pll->regmap, PMC_PLL_ACR,
-				   PMC_PLL_ACR_UTMIBG | PMC_PLL_ACR_UTMIVR, 0);
+		regmap_update_bits(pll->regmap, AT91_PMC_PLL_ACR,
+				   AT91_PMC_PLL_ACR_UTMIBG |
+				   AT91_PMC_PLL_ACR_UTMIVR, 0);
 
-	regmap_update_bits(pll->regmap, PMC_PLL_UPDT,
-			   PMC_PLL_UPDT_UPDATE, PMC_PLL_UPDT_UPDATE);
+	regmap_update_bits(pll->regmap, AT91_PMC_PLL_UPDT,
+			   AT91_PMC_PLL_UPDT_UPDATE, AT91_PMC_PLL_UPDT_UPDATE);
 
 	spin_unlock_irqrestore(pll->lock, flags);
 }
@@ -316,10 +299,10 @@ sam9x60_clk_register_pll(struct regmap *regmap, spinlock_t *lock,
 	pll->regmap = regmap;
 	pll->lock = lock;
 
-	regmap_write(regmap, PMC_PLL_UPDT, id);
-	regmap_read(regmap, PMC_PLL_CTRL0, &pllr);
+	regmap_write(regmap, AT91_PMC_PLL_UPDT, id);
+	regmap_read(regmap, AT91_PMC_PLL_CTRL0, &pllr);
 	pll->div = FIELD_GET(PMC_PLL_CTRL0_DIV_MSK, pllr);
-	regmap_read(regmap, PMC_PLL_CTRL1, &pllr);
+	regmap_read(regmap, AT91_PMC_PLL_CTRL1, &pllr);
 	pll->mul = FIELD_GET(PMC_PLL_CTRL1_MUL_MSK, pllr);
 
 	hw = &pll->hw;
diff --git a/drivers/clk/at91/clk-usb.c b/drivers/clk/at91/clk-usb.c
index 22aede4..31d5c45 100644
--- a/drivers/clk/at91/clk-usb.c
+++ b/drivers/clk/at91/clk-usb.c
@@ -25,6 +25,7 @@ struct at91sam9x5_clk_usb {
 	struct clk_hw hw;
 	struct regmap *regmap;
 	u32 usbs_mask;
+	u8 num_parents;
 };
 
 #define to_at91sam9x5_clk_usb(hw) \
@@ -75,6 +76,9 @@ static int at91sam9x5_clk_usb_determine_rate(struct clk_hw *hw,
 			tmp_parent_rate = req->rate * div;
 			tmp_parent_rate = clk_hw_round_rate(parent,
 							   tmp_parent_rate);
+			if (!tmp_parent_rate)
+				continue;
+
 			tmp_rate = DIV_ROUND_CLOSEST(tmp_parent_rate, div);
 			if (tmp_rate < req->rate)
 				tmp_diff = req->rate - tmp_rate;
@@ -107,7 +111,7 @@ static int at91sam9x5_clk_usb_set_parent(struct clk_hw *hw, u8 index)
 {
 	struct at91sam9x5_clk_usb *usb = to_at91sam9x5_clk_usb(hw);
 
-	if (index > 1)
+	if (index >= usb->num_parents)
 		return -EINVAL;
 
 	regmap_update_bits(usb->regmap, AT91_PMC_USB, usb->usbs_mask, index);
@@ -211,7 +215,8 @@ _at91sam9x5_clk_register_usb(struct regmap *regmap, const char *name,
 
 	usb->hw.init = &init;
 	usb->regmap = regmap;
-	usb->usbs_mask = SAM9X5_USBS_MASK;
+	usb->usbs_mask = usbs_mask;
+	usb->num_parents = num_parents;
 
 	hw = &usb->hw;
 	ret = clk_hw_register(NULL, &usb->hw);
diff --git a/drivers/clk/at91/sam9x60.c b/drivers/clk/at91/sam9x60.c
index 77398ae..cc19e8f 100644
--- a/drivers/clk/at91/sam9x60.c
+++ b/drivers/clk/at91/sam9x60.c
@@ -124,7 +124,6 @@ static const struct {
 	char *n;
 	u8 id;
 	struct clk_range r;
-	bool pll;
 } sam9x60_gck[] = {
 	{ .n = "flex0_gclk",  .id = 5, },
 	{ .n = "flex1_gclk",  .id = 6, },
@@ -144,11 +143,9 @@ static const struct {
 	{ .n = "sdmmc1_gclk", .id = 26, .r = { .min = 0, .max = 105000000 }, },
 	{ .n = "flex11_gclk", .id = 32, },
 	{ .n = "flex12_gclk", .id = 33, },
-	{ .n = "i2s_gclk",    .id = 34, .r = { .min = 0, .max = 105000000 },
-		.pll = true, },
+	{ .n = "i2s_gclk",    .id = 34, .r = { .min = 0, .max = 105000000 }, },
 	{ .n = "pit64b_gclk", .id = 37, },
-	{ .n = "classd_gclk", .id = 42, .r = { .min = 0, .max = 100000000 },
-		.pll = true, },
+	{ .n = "classd_gclk", .id = 42, .r = { .min = 0, .max = 100000000 }, },
 	{ .n = "tcb1_gclk",   .id = 45, },
 	{ .n = "dbgu_gclk",   .id = 47, },
 };
@@ -237,9 +234,8 @@ static void __init sam9x60_pmc_setup(struct device_node *np)
 
 	parent_names[0] = "pllack";
 	parent_names[1] = "upllck";
-	parent_names[2] = "mainck";
-	parent_names[3] = "mainck";
-	hw = sam9x60_clk_register_usb(regmap, "usbck", parent_names, 4);
+	parent_names[2] = "main_osc";
+	hw = sam9x60_clk_register_usb(regmap, "usbck", parent_names, 3);
 	if (IS_ERR(hw))
 		goto err_free;
 
@@ -290,7 +286,7 @@ static void __init sam9x60_pmc_setup(struct device_node *np)
 						 sam9x60_gck[i].n,
 						 parent_names, 6,
 						 sam9x60_gck[i].id,
-						 sam9x60_gck[i].pll,
+						 false,
 						 &sam9x60_gck[i].r);
 		if (IS_ERR(hw))
 			goto err_free;
diff --git a/drivers/clk/at91/sama5d3.c b/drivers/clk/at91/sama5d3.c
new file mode 100644
index 0000000..88506f9
--- /dev/null
+++ b/drivers/clk/at91/sama5d3.c
@@ -0,0 +1,240 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/clk-provider.h>
+#include <linux/mfd/syscon.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/clock/at91.h>
+
+#include "pmc.h"
+
+static const struct clk_master_characteristics mck_characteristics = {
+	.output = { .min = 0, .max = 166000000 },
+	.divisors = { 1, 2, 4, 3 },
+};
+
+static u8 plla_out[] = { 0 };
+
+static u16 plla_icpll[] = { 0 };
+
+static const struct clk_range plla_outputs[] = {
+	{ .min = 400000000, .max = 1000000000 },
+};
+
+static const struct clk_pll_characteristics plla_characteristics = {
+	.input = { .min = 8000000, .max = 50000000 },
+	.num_output = ARRAY_SIZE(plla_outputs),
+	.output = plla_outputs,
+	.icpll = plla_icpll,
+	.out = plla_out,
+};
+
+static const struct clk_pcr_layout sama5d3_pcr_layout = {
+	.offset = 0x10c,
+	.cmd = BIT(12),
+	.pid_mask = GENMASK(6, 0),
+	.div_mask = GENMASK(17, 16),
+};
+
+static const struct {
+	char *n;
+	char *p;
+	u8 id;
+} sama5d3_systemck[] = {
+	{ .n = "ddrck", .p = "masterck", .id = 2 },
+	{ .n = "lcdck", .p = "masterck", .id = 3 },
+	{ .n = "smdck", .p = "smdclk",   .id = 4 },
+	{ .n = "uhpck", .p = "usbck",    .id = 6 },
+	{ .n = "udpck", .p = "usbck",    .id = 7 },
+	{ .n = "pck0",  .p = "prog0",    .id = 8 },
+	{ .n = "pck1",  .p = "prog1",    .id = 9 },
+	{ .n = "pck2",  .p = "prog2",    .id = 10 },
+};
+
+static const struct {
+	char *n;
+	u8 id;
+	struct clk_range r;
+} sama5d3_periphck[] = {
+	{ .n = "dbgu_clk", .id = 2, },
+	{ .n = "hsmc_clk", .id = 5, },
+	{ .n = "pioA_clk", .id = 6, },
+	{ .n = "pioB_clk", .id = 7, },
+	{ .n = "pioC_clk", .id = 8, },
+	{ .n = "pioD_clk", .id = 9, },
+	{ .n = "pioE_clk", .id = 10, },
+	{ .n = "usart0_clk", .id = 12, .r = { .min = 0, .max = 83000000 }, },
+	{ .n = "usart1_clk", .id = 13, .r = { .min = 0, .max = 83000000 }, },
+	{ .n = "usart2_clk", .id = 14, .r = { .min = 0, .max = 83000000 }, },
+	{ .n = "usart3_clk", .id = 15, .r = { .min = 0, .max = 83000000 }, },
+	{ .n = "uart0_clk", .id = 16, .r = { .min = 0, .max = 83000000 }, },
+	{ .n = "uart1_clk", .id = 17, .r = { .min = 0, .max = 83000000 }, },
+	{ .n = "twi0_clk", .id = 18, .r = { .min = 0, .max = 41500000 }, },
+	{ .n = "twi1_clk", .id = 19, .r = { .min = 0, .max = 41500000 }, },
+	{ .n = "twi2_clk", .id = 20, .r = { .min = 0, .max = 41500000 }, },
+	{ .n = "mci0_clk", .id = 21, },
+	{ .n = "mci1_clk", .id = 22, },
+	{ .n = "mci2_clk", .id = 23, },
+	{ .n = "spi0_clk", .id = 24, .r = { .min = 0, .max = 166000000 }, },
+	{ .n = "spi1_clk", .id = 25, .r = { .min = 0, .max = 166000000 }, },
+	{ .n = "tcb0_clk", .id = 26, .r = { .min = 0, .max = 166000000 }, },
+	{ .n = "tcb1_clk", .id = 27, .r = { .min = 0, .max = 166000000 }, },
+	{ .n = "pwm_clk", .id = 28, },
+	{ .n = "adc_clk", .id = 29, .r = { .min = 0, .max = 83000000 }, },
+	{ .n = "dma0_clk", .id = 30, },
+	{ .n = "dma1_clk", .id = 31, },
+	{ .n = "uhphs_clk", .id = 32, },
+	{ .n = "udphs_clk", .id = 33, },
+	{ .n = "macb0_clk", .id = 34, },
+	{ .n = "macb1_clk", .id = 35, },
+	{ .n = "lcdc_clk", .id = 36, },
+	{ .n = "isi_clk", .id = 37, },
+	{ .n = "ssc0_clk", .id = 38, .r = { .min = 0, .max = 83000000 }, },
+	{ .n = "ssc1_clk", .id = 39, .r = { .min = 0, .max = 83000000 }, },
+	{ .n = "can0_clk", .id = 40, .r = { .min = 0, .max = 83000000 }, },
+	{ .n = "can1_clk", .id = 41, .r = { .min = 0, .max = 83000000 }, },
+	{ .n = "sha_clk", .id = 42, },
+	{ .n = "aes_clk", .id = 43, },
+	{ .n = "tdes_clk", .id = 44, },
+	{ .n = "trng_clk", .id = 45, },
+	{ .n = "fuse_clk", .id = 48, },
+	{ .n = "mpddr_clk", .id = 49, },
+};
+
+static void __init sama5d3_pmc_setup(struct device_node *np)
+{
+	const char *slck_name, *mainxtal_name;
+	struct pmc_data *sama5d3_pmc;
+	const char *parent_names[5];
+	struct regmap *regmap;
+	struct clk_hw *hw;
+	int i;
+	bool bypass;
+
+	i = of_property_match_string(np, "clock-names", "slow_clk");
+	if (i < 0)
+		return;
+
+	slck_name = of_clk_get_parent_name(np, i);
+
+	i = of_property_match_string(np, "clock-names", "main_xtal");
+	if (i < 0)
+		return;
+	mainxtal_name = of_clk_get_parent_name(np, i);
+
+	regmap = syscon_node_to_regmap(np);
+	if (IS_ERR(regmap))
+		return;
+
+	sama5d3_pmc = pmc_data_allocate(PMC_MAIN + 1,
+					nck(sama5d3_systemck),
+					nck(sama5d3_periphck), 0);
+	if (!sama5d3_pmc)
+		return;
+
+	hw = at91_clk_register_main_rc_osc(regmap, "main_rc_osc", 12000000,
+					   50000000);
+	if (IS_ERR(hw))
+		goto err_free;
+
+	bypass = of_property_read_bool(np, "atmel,osc-bypass");
+
+	hw = at91_clk_register_main_osc(regmap, "main_osc", mainxtal_name,
+					bypass);
+	if (IS_ERR(hw))
+		goto err_free;
+
+	parent_names[0] = "main_rc_osc";
+	parent_names[1] = "main_osc";
+	hw = at91_clk_register_sam9x5_main(regmap, "mainck", parent_names, 2);
+	if (IS_ERR(hw))
+		goto err_free;
+
+	hw = at91_clk_register_pll(regmap, "pllack", "mainck", 0,
+				   &sama5d3_pll_layout, &plla_characteristics);
+	if (IS_ERR(hw))
+		goto err_free;
+
+	hw = at91_clk_register_plldiv(regmap, "plladivck", "pllack");
+	if (IS_ERR(hw))
+		goto err_free;
+
+	hw = at91_clk_register_utmi(regmap, NULL, "utmick", "mainck");
+	if (IS_ERR(hw))
+		goto err_free;
+
+	sama5d3_pmc->chws[PMC_UTMI] = hw;
+
+	parent_names[0] = slck_name;
+	parent_names[1] = "mainck";
+	parent_names[2] = "plladivck";
+	parent_names[3] = "utmick";
+	hw = at91_clk_register_master(regmap, "masterck", 4, parent_names,
+				      &at91sam9x5_master_layout,
+				      &mck_characteristics);
+	if (IS_ERR(hw))
+		goto err_free;
+
+	sama5d3_pmc->chws[PMC_MCK] = hw;
+
+	parent_names[0] = "plladivck";
+	parent_names[1] = "utmick";
+	hw = at91sam9x5_clk_register_usb(regmap, "usbck", parent_names, 2);
+	if (IS_ERR(hw))
+		goto err_free;
+
+	hw = at91sam9x5_clk_register_smd(regmap, "smdclk", parent_names, 2);
+	if (IS_ERR(hw))
+		goto err_free;
+
+	parent_names[0] = slck_name;
+	parent_names[1] = "mainck";
+	parent_names[2] = "plladivck";
+	parent_names[3] = "utmick";
+	parent_names[4] = "masterck";
+	for (i = 0; i < 3; i++) {
+		char name[6];
+
+		snprintf(name, sizeof(name), "prog%d", i);
+
+		hw = at91_clk_register_programmable(regmap, name,
+						    parent_names, 5, i,
+						    &at91sam9x5_programmable_layout);
+		if (IS_ERR(hw))
+			goto err_free;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(sama5d3_systemck); i++) {
+		hw = at91_clk_register_system(regmap, sama5d3_systemck[i].n,
+					      sama5d3_systemck[i].p,
+					      sama5d3_systemck[i].id);
+		if (IS_ERR(hw))
+			goto err_free;
+
+		sama5d3_pmc->shws[sama5d3_systemck[i].id] = hw;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(sama5d3_periphck); i++) {
+		hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock,
+							 &sama5d3_pcr_layout,
+							 sama5d3_periphck[i].n,
+							 "masterck",
+							 sama5d3_periphck[i].id,
+							 &sama5d3_periphck[i].r);
+		if (IS_ERR(hw))
+			goto err_free;
+
+		sama5d3_pmc->phws[sama5d3_periphck[i].id] = hw;
+	}
+
+	of_clk_add_hw_provider(np, of_clk_hw_pmc_get, sama5d3_pmc);
+
+	return;
+
+err_free:
+	pmc_data_free(sama5d3_pmc);
+}
+/*
+ * The TCB is used as the clocksource so its clock is needed early. This means
+ * this can't be a platform driver.
+ */
+CLK_OF_DECLARE_DRIVER(sama5d3_pmc, "atmel,sama5d3-pmc", sama5d3_pmc_setup);
diff --git a/drivers/clk/clk-asm9260.c b/drivers/clk/clk-asm9260.c
index 536b59a..bacebd4 100644
--- a/drivers/clk/clk-asm9260.c
+++ b/drivers/clk/clk-asm9260.c
@@ -276,7 +276,7 @@ static void __init asm9260_acc_init(struct device_node *np)
 
 	/* TODO: Convert to DT parent scheme */
 	ref_clk = of_clk_get_parent_name(np, 0);
-	hw = __clk_hw_register_fixed_rate_with_accuracy(NULL, NULL, pll_clk,
+	hw = __clk_hw_register_fixed_rate(NULL, NULL, pll_clk,
 			ref_clk, NULL, NULL, 0, rate, 0,
 			CLK_FIXED_RATE_PARENT_ACCURACY);
 
diff --git a/drivers/clk/clk-si5341.c b/drivers/clk/clk-si5341.c
index 6e780c2..3c228b0 100644
--- a/drivers/clk/clk-si5341.c
+++ b/drivers/clk/clk-si5341.c
@@ -16,6 +16,8 @@
 #include <linux/slab.h>
 #include <asm/unaligned.h>
 
+#define SI5341_NUM_INPUTS 4
+
 #define SI5341_MAX_NUM_OUTPUTS 10
 #define SI5340_MAX_NUM_OUTPUTS 4
 
@@ -56,8 +58,8 @@ struct clk_si5341 {
 	struct i2c_client *i2c_client;
 	struct clk_si5341_synth synth[SI5341_NUM_SYNTH];
 	struct clk_si5341_output clk[SI5341_MAX_NUM_OUTPUTS];
-	struct clk *pxtal;
-	const char *pxtal_name;
+	struct clk *input_clk[SI5341_NUM_INPUTS];
+	const char *input_clk_name[SI5341_NUM_INPUTS];
 	const u16 *reg_output_offset;
 	const u16 *reg_rdiv_offset;
 	u64 freq_vco; /* 13500–14256 MHz */
@@ -78,10 +80,25 @@ struct clk_si5341_output_config {
 #define SI5341_DEVICE_REV	0x0005
 #define SI5341_STATUS		0x000C
 #define SI5341_SOFT_RST		0x001C
+#define SI5341_IN_SEL		0x0021
+#define SI5341_XAXB_CFG		0x090E
+#define SI5341_IN_EN		0x0949
+#define SI5341_INX_TO_PFD_EN	0x094A
+
+/* Input selection */
+#define SI5341_IN_SEL_MASK	0x06
+#define SI5341_IN_SEL_SHIFT	1
+#define SI5341_IN_SEL_REGCTRL	0x01
+#define SI5341_INX_TO_PFD_SHIFT	4
+
+/* XTAL config bits */
+#define SI5341_XAXB_CFG_EXTCLK_EN	BIT(0)
+#define SI5341_XAXB_CFG_PDNB		BIT(1)
 
 /* Input dividers (48-bit) */
 #define SI5341_IN_PDIV(x)	(0x0208 + ((x) * 10))
 #define SI5341_IN_PSET(x)	(0x020E + ((x) * 10))
+#define SI5341_PX_UPD		0x0230
 
 /* PLL configuration */
 #define SI5341_PLL_M_NUM	0x0235
@@ -120,6 +137,10 @@ struct si5341_reg_default {
 	u8 value;
 };
 
+static const char * const si5341_input_clock_names[] = {
+	"in0", "in1", "in2", "xtal"
+};
+
 /* Output configuration registers 0..9 are not quite logically organized */
 static const u16 si5341_reg_output_offset[] = {
 	0x0108,
@@ -390,7 +411,112 @@ static unsigned long si5341_clk_recalc_rate(struct clk_hw *hw,
 	return (unsigned long)res;
 }
 
+static int si5341_clk_get_selected_input(struct clk_si5341 *data)
+{
+	int err;
+	u32 val;
+
+	err = regmap_read(data->regmap, SI5341_IN_SEL, &val);
+	if (err < 0)
+		return err;
+
+	return (val & SI5341_IN_SEL_MASK) >> SI5341_IN_SEL_SHIFT;
+}
+
+static u8 si5341_clk_get_parent(struct clk_hw *hw)
+{
+	struct clk_si5341 *data = to_clk_si5341(hw);
+	int res = si5341_clk_get_selected_input(data);
+
+	if (res < 0)
+		return 0; /* Apparently we cannot report errors */
+
+	return res;
+}
+
+static int si5341_clk_reparent(struct clk_si5341 *data, u8 index)
+{
+	int err;
+	u8 val;
+
+	val = (index << SI5341_IN_SEL_SHIFT) & SI5341_IN_SEL_MASK;
+	/* Enable register-based input selection */
+	val |= SI5341_IN_SEL_REGCTRL;
+
+	err = regmap_update_bits(data->regmap,
+		SI5341_IN_SEL, SI5341_IN_SEL_REGCTRL | SI5341_IN_SEL_MASK, val);
+	if (err < 0)
+		return err;
+
+	if (index < 3) {
+		/* Enable input buffer for selected input */
+		err = regmap_update_bits(data->regmap,
+				SI5341_IN_EN, 0x07, BIT(index));
+		if (err < 0)
+			return err;
+
+		/* Enables the input to phase detector */
+		err = regmap_update_bits(data->regmap, SI5341_INX_TO_PFD_EN,
+				0x7 << SI5341_INX_TO_PFD_SHIFT,
+				BIT(index + SI5341_INX_TO_PFD_SHIFT));
+		if (err < 0)
+			return err;
+
+		/* Power down XTAL oscillator and buffer */
+		err = regmap_update_bits(data->regmap, SI5341_XAXB_CFG,
+				SI5341_XAXB_CFG_PDNB, 0);
+		if (err < 0)
+			return err;
+
+		/*
+		 * Set the P divider to "1". There's no explanation in the
+		 * datasheet of these registers, but the clockbuilder software
+		 * programs a "1" when the input is being used.
+		 */
+		err = regmap_write(data->regmap, SI5341_IN_PDIV(index), 1);
+		if (err < 0)
+			return err;
+
+		err = regmap_write(data->regmap, SI5341_IN_PSET(index), 1);
+		if (err < 0)
+			return err;
+
+		/* Set update PDIV bit */
+		err = regmap_write(data->regmap, SI5341_PX_UPD, BIT(index));
+		if (err < 0)
+			return err;
+	} else {
+		/* Disable all input buffers */
+		err = regmap_update_bits(data->regmap, SI5341_IN_EN, 0x07, 0);
+		if (err < 0)
+			return err;
+
+		/* Disable input to phase detector */
+		err = regmap_update_bits(data->regmap, SI5341_INX_TO_PFD_EN,
+				0x7 << SI5341_INX_TO_PFD_SHIFT, 0);
+		if (err < 0)
+			return err;
+
+		/* Power up XTAL oscillator and buffer */
+		err = regmap_update_bits(data->regmap, SI5341_XAXB_CFG,
+				SI5341_XAXB_CFG_PDNB, SI5341_XAXB_CFG_PDNB);
+		if (err < 0)
+			return err;
+	}
+
+	return 0;
+}
+
+static int si5341_clk_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct clk_si5341 *data = to_clk_si5341(hw);
+
+	return si5341_clk_reparent(data, index);
+}
+
 static const struct clk_ops si5341_clk_ops = {
+	.set_parent = si5341_clk_set_parent,
+	.get_parent = si5341_clk_get_parent,
 	.recalc_rate = si5341_clk_recalc_rate,
 };
 
@@ -985,7 +1111,8 @@ static const struct regmap_range si5341_regmap_volatile_range[] = {
 	regmap_reg_range(0x000C, 0x0012), /* Status */
 	regmap_reg_range(0x001C, 0x001E), /* reset, finc/fdec */
 	regmap_reg_range(0x00E2, 0x00FE), /* NVM, interrupts, device ready */
-	/* Update bits for synth config */
+	/* Update bits for P divider and synth config */
+	regmap_reg_range(SI5341_PX_UPD, SI5341_PX_UPD),
 	regmap_reg_range(SI5341_SYNTH_N_UPD(0), SI5341_SYNTH_N_UPD(0)),
 	regmap_reg_range(SI5341_SYNTH_N_UPD(1), SI5341_SYNTH_N_UPD(1)),
 	regmap_reg_range(SI5341_SYNTH_N_UPD(2), SI5341_SYNTH_N_UPD(2)),
@@ -1122,6 +1249,7 @@ static int si5341_initialize_pll(struct clk_si5341 *data)
 	struct device_node *np = data->i2c_client->dev.of_node;
 	u32 m_num = 0;
 	u32 m_den = 0;
+	int sel;
 
 	if (of_property_read_u32(np, "silabs,pll-m-num", &m_num)) {
 		dev_err(&data->i2c_client->dev,
@@ -1135,7 +1263,11 @@ static int si5341_initialize_pll(struct clk_si5341 *data)
 	if (!m_num || !m_den) {
 		dev_err(&data->i2c_client->dev,
 			"PLL configuration invalid, assume 14GHz\n");
-		m_den = clk_get_rate(data->pxtal) / 10;
+		sel = si5341_clk_get_selected_input(data);
+		if (sel < 0)
+			return sel;
+
+		m_den = clk_get_rate(data->input_clk[sel]) / 10;
 		m_num = 1400000000;
 	}
 
@@ -1143,11 +1275,52 @@ static int si5341_initialize_pll(struct clk_si5341 *data)
 			SI5341_PLL_M_NUM, m_num, m_den);
 }
 
+static int si5341_clk_select_active_input(struct clk_si5341 *data)
+{
+	int res;
+	int err;
+	int i;
+
+	res = si5341_clk_get_selected_input(data);
+	if (res < 0)
+		return res;
+
+	/* If the current register setting is invalid, pick the first input */
+	if (!data->input_clk[res]) {
+		dev_dbg(&data->i2c_client->dev,
+			"Input %d not connected, rerouting\n", res);
+		res = -ENODEV;
+		for (i = 0; i < SI5341_NUM_INPUTS; ++i) {
+			if (data->input_clk[i]) {
+				res = i;
+				break;
+			}
+		}
+		if (res < 0) {
+			dev_err(&data->i2c_client->dev,
+				"No clock input available\n");
+			return res;
+		}
+	}
+
+	/* Make sure the selected clock is also enabled and routed */
+	err = si5341_clk_reparent(data, res);
+	if (err < 0)
+		return err;
+
+	err = clk_prepare_enable(data->input_clk[res]);
+	if (err < 0)
+		return err;
+
+	return res;
+}
+
 static int si5341_probe(struct i2c_client *client,
 		const struct i2c_device_id *id)
 {
 	struct clk_si5341 *data;
 	struct clk_init_data init;
+	struct clk *input;
 	const char *root_clock_name;
 	const char *synth_clock_names[SI5341_NUM_SYNTH];
 	int err;
@@ -1161,12 +1334,16 @@ static int si5341_probe(struct i2c_client *client,
 
 	data->i2c_client = client;
 
-	data->pxtal = devm_clk_get(&client->dev, "xtal");
-	if (IS_ERR(data->pxtal)) {
-		if (PTR_ERR(data->pxtal) == -EPROBE_DEFER)
-			return -EPROBE_DEFER;
-
-		dev_err(&client->dev, "Missing xtal clock input\n");
+	for (i = 0; i < SI5341_NUM_INPUTS; ++i) {
+		input = devm_clk_get(&client->dev, si5341_input_clock_names[i]);
+		if (IS_ERR(input)) {
+			if (PTR_ERR(input) == -EPROBE_DEFER)
+				return -EPROBE_DEFER;
+			data->input_clk_name[i] = si5341_input_clock_names[i];
+		} else {
+			data->input_clk[i] = input;
+			data->input_clk_name[i] = __clk_get_name(input);
+		}
 	}
 
 	err = si5341_dt_parse_dt(client, config);
@@ -1188,9 +1365,6 @@ static int si5341_probe(struct i2c_client *client,
 	if (err < 0)
 		return err;
 
-	/* "Activate" the xtal (usually a fixed clock) */
-	clk_prepare_enable(data->pxtal);
-
 	if (of_property_read_bool(client->dev.of_node, "silabs,reprogram")) {
 		initialization_required = true;
 	} else {
@@ -1223,7 +1397,14 @@ static int si5341_probe(struct i2c_client *client,
 					ARRAY_SIZE(si5341_reg_defaults));
 		if (err < 0)
 			return err;
+	}
 
+	/* Input must be up and running at this point */
+	err = si5341_clk_select_active_input(data);
+	if (err < 0)
+		return err;
+
+	if (initialization_required) {
 		/* PLL configuration is required */
 		err = si5341_initialize_pll(data);
 		if (err < 0)
@@ -1231,9 +1412,8 @@ static int si5341_probe(struct i2c_client *client,
 	}
 
 	/* Register the PLL */
-	data->pxtal_name = __clk_get_name(data->pxtal);
-	init.parent_names = &data->pxtal_name;
-	init.num_parents = 1; /* For now, only XTAL input supported */
+	init.parent_names = data->input_clk_name;
+	init.num_parents = SI5341_NUM_INPUTS;
 	init.ops = &si5341_clk_ops;
 	init.flags = 0;
 	data->hw.init = &init;
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 95adf6c..39c59f0 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -488,7 +488,7 @@ unsigned long clk_hw_get_rate(const struct clk_hw *hw)
 }
 EXPORT_SYMBOL_GPL(clk_hw_get_rate);
 
-static unsigned long __clk_get_accuracy(struct clk_core *core)
+static unsigned long clk_core_get_accuracy_no_lock(struct clk_core *core)
 {
 	if (!core)
 		return 0;
@@ -774,7 +774,7 @@ static void clk_core_rate_restore_protect(struct clk_core *core, int count)
  * clk_rate_exclusive_get - get exclusivity over the clk rate control
  * @clk: the clk over which the exclusity of rate control is requested
  *
- * clk_rate_exlusive_get() begins a critical section during which a clock
+ * clk_rate_exclusive_get() begins a critical section during which a clock
  * consumer cannot tolerate any other consumer making any operation on the
  * clock which could result in a rate change or rate glitch. Exclusive clocks
  * cannot have their rate changed, either directly or indirectly due to changes
@@ -1517,18 +1517,12 @@ static void __clk_recalc_accuracies(struct clk_core *core)
 		__clk_recalc_accuracies(child);
 }
 
-static long clk_core_get_accuracy(struct clk_core *core)
+static long clk_core_get_accuracy_recalc(struct clk_core *core)
 {
-	unsigned long accuracy;
-
-	clk_prepare_lock();
 	if (core && (core->flags & CLK_GET_ACCURACY_NOCACHE))
 		__clk_recalc_accuracies(core);
 
-	accuracy = __clk_get_accuracy(core);
-	clk_prepare_unlock();
-
-	return accuracy;
+	return clk_core_get_accuracy_no_lock(core);
 }
 
 /**
@@ -1542,10 +1536,16 @@ static long clk_core_get_accuracy(struct clk_core *core)
  */
 long clk_get_accuracy(struct clk *clk)
 {
+	long accuracy;
+
 	if (!clk)
 		return 0;
 
-	return clk_core_get_accuracy(clk->core);
+	clk_prepare_lock();
+	accuracy = clk_core_get_accuracy_recalc(clk->core);
+	clk_prepare_unlock();
+
+	return accuracy;
 }
 EXPORT_SYMBOL_GPL(clk_get_accuracy);
 
@@ -1599,19 +1599,12 @@ static void __clk_recalc_rates(struct clk_core *core, unsigned long msg)
 		__clk_recalc_rates(child, msg);
 }
 
-static unsigned long clk_core_get_rate(struct clk_core *core)
+static unsigned long clk_core_get_rate_recalc(struct clk_core *core)
 {
-	unsigned long rate;
-
-	clk_prepare_lock();
-
 	if (core && (core->flags & CLK_GET_RATE_NOCACHE))
 		__clk_recalc_rates(core, 0);
 
-	rate = clk_core_get_rate_nolock(core);
-	clk_prepare_unlock();
-
-	return rate;
+	return clk_core_get_rate_nolock(core);
 }
 
 /**
@@ -1624,10 +1617,16 @@ static unsigned long clk_core_get_rate(struct clk_core *core)
  */
 unsigned long clk_get_rate(struct clk *clk)
 {
+	unsigned long rate;
+
 	if (!clk)
 		return 0;
 
-	return clk_core_get_rate(clk->core);
+	clk_prepare_lock();
+	rate = clk_core_get_rate_recalc(clk->core);
+	clk_prepare_unlock();
+
+	return rate;
 }
 EXPORT_SYMBOL_GPL(clk_get_rate);
 
@@ -2660,12 +2659,14 @@ static int clk_core_get_phase(struct clk_core *core)
 {
 	int ret;
 
-	clk_prepare_lock();
+	lockdep_assert_held(&prepare_lock);
+	if (!core->ops->get_phase)
+		return 0;
+
 	/* Always try to update cached phase if possible */
-	if (core->ops->get_phase)
-		core->phase = core->ops->get_phase(core->hw);
-	ret = core->phase;
-	clk_prepare_unlock();
+	ret = core->ops->get_phase(core->hw);
+	if (ret >= 0)
+		core->phase = ret;
 
 	return ret;
 }
@@ -2679,10 +2680,16 @@ static int clk_core_get_phase(struct clk_core *core)
  */
 int clk_get_phase(struct clk *clk)
 {
+	int ret;
+
 	if (!clk)
 		return 0;
 
-	return clk_core_get_phase(clk->core);
+	clk_prepare_lock();
+	ret = clk_core_get_phase(clk->core);
+	clk_prepare_unlock();
+
+	return ret;
 }
 EXPORT_SYMBOL_GPL(clk_get_phase);
 
@@ -2896,13 +2903,22 @@ static struct hlist_head *orphan_list[] = {
 static void clk_summary_show_one(struct seq_file *s, struct clk_core *c,
 				 int level)
 {
-	seq_printf(s, "%*s%-*s %7d %8d %8d %11lu %10lu %5d %6d\n",
+	int phase;
+
+	seq_printf(s, "%*s%-*s %7d %8d %8d %11lu %10lu ",
 		   level * 3 + 1, "",
 		   30 - level * 3, c->name,
 		   c->enable_count, c->prepare_count, c->protect_count,
-		   clk_core_get_rate(c), clk_core_get_accuracy(c),
-		   clk_core_get_phase(c),
-		   clk_core_get_scaled_duty_cycle(c, 100000));
+		   clk_core_get_rate_recalc(c),
+		   clk_core_get_accuracy_recalc(c));
+
+	phase = clk_core_get_phase(c);
+	if (phase >= 0)
+		seq_printf(s, "%5d", phase);
+	else
+		seq_puts(s, "-----");
+
+	seq_printf(s, " %6d\n", clk_core_get_scaled_duty_cycle(c, 100000));
 }
 
 static void clk_summary_show_subtree(struct seq_file *s, struct clk_core *c,
@@ -2939,6 +2955,7 @@ DEFINE_SHOW_ATTRIBUTE(clk_summary);
 
 static void clk_dump_one(struct seq_file *s, struct clk_core *c, int level)
 {
+	int phase;
 	unsigned long min_rate, max_rate;
 
 	clk_core_get_boundaries(c, &min_rate, &max_rate);
@@ -2948,11 +2965,13 @@ static void clk_dump_one(struct seq_file *s, struct clk_core *c, int level)
 	seq_printf(s, "\"enable_count\": %d,", c->enable_count);
 	seq_printf(s, "\"prepare_count\": %d,", c->prepare_count);
 	seq_printf(s, "\"protect_count\": %d,", c->protect_count);
-	seq_printf(s, "\"rate\": %lu,", clk_core_get_rate(c));
+	seq_printf(s, "\"rate\": %lu,", clk_core_get_rate_recalc(c));
 	seq_printf(s, "\"min_rate\": %lu,", min_rate);
 	seq_printf(s, "\"max_rate\": %lu,", max_rate);
-	seq_printf(s, "\"accuracy\": %lu,", clk_core_get_accuracy(c));
-	seq_printf(s, "\"phase\": %d,", clk_core_get_phase(c));
+	seq_printf(s, "\"accuracy\": %lu,", clk_core_get_accuracy_recalc(c));
+	phase = clk_core_get_phase(c);
+	if (phase >= 0)
+		seq_printf(s, "\"phase\": %d,", phase);
 	seq_printf(s, "\"duty_cycle\": %u",
 		   clk_core_get_scaled_duty_cycle(c, 100000));
 }
@@ -3323,7 +3342,9 @@ static void clk_core_reparent_orphans_nolock(void)
 static int __clk_core_init(struct clk_core *core)
 {
 	int ret;
+	struct clk_core *parent;
 	unsigned long rate;
+	int phase;
 
 	if (!core)
 		return -EINVAL;
@@ -3394,7 +3415,7 @@ static int __clk_core_init(struct clk_core *core)
 			goto out;
 	}
 
-	core->parent = __clk_init_parent(core);
+	parent = core->parent = __clk_init_parent(core);
 
 	/*
 	 * Populate core->parent if parent has already been clk_core_init'd. If
@@ -3406,10 +3427,9 @@ static int __clk_core_init(struct clk_core *core)
 	 * clocks and re-parent any that are children of the clock currently
 	 * being clk_init'd.
 	 */
-	if (core->parent) {
-		hlist_add_head(&core->child_node,
-				&core->parent->children);
-		core->orphan = core->parent->orphan;
+	if (parent) {
+		hlist_add_head(&core->child_node, &parent->children);
+		core->orphan = parent->orphan;
 	} else if (!core->num_parents) {
 		hlist_add_head(&core->child_node, &clk_root_list);
 		core->orphan = false;
@@ -3427,21 +3447,24 @@ static int __clk_core_init(struct clk_core *core)
 	 */
 	if (core->ops->recalc_accuracy)
 		core->accuracy = core->ops->recalc_accuracy(core->hw,
-					__clk_get_accuracy(core->parent));
-	else if (core->parent)
-		core->accuracy = core->parent->accuracy;
+					clk_core_get_accuracy_no_lock(parent));
+	else if (parent)
+		core->accuracy = parent->accuracy;
 	else
 		core->accuracy = 0;
 
 	/*
-	 * Set clk's phase.
+	 * Set clk's phase by clk_core_get_phase() caching the phase.
 	 * Since a phase is by definition relative to its parent, just
 	 * query the current clock phase, or just assume it's in phase.
 	 */
-	if (core->ops->get_phase)
-		core->phase = core->ops->get_phase(core->hw);
-	else
-		core->phase = 0;
+	phase = clk_core_get_phase(core);
+	if (phase < 0) {
+		ret = phase;
+		pr_warn("%s: Failed to get phase for clk '%s'\n", __func__,
+			core->name);
+		goto out;
+	}
 
 	/*
 	 * Set clk's duty cycle.
@@ -3456,9 +3479,9 @@ static int __clk_core_init(struct clk_core *core)
 	 */
 	if (core->ops->recalc_rate)
 		rate = core->ops->recalc_rate(core->hw,
-				clk_core_get_rate_nolock(core->parent));
-	else if (core->parent)
-		rate = core->parent->rate;
+				clk_core_get_rate_nolock(parent));
+	else if (parent)
+		rate = parent->rate;
 	else
 		rate = 0;
 	core->rate = core->req_rate = rate;
@@ -4865,8 +4888,8 @@ static int parent_ready(struct device_node *np)
  *
  * Return: error code or zero on success
  */
-int of_clk_detect_critical(struct device_node *np,
-					  int index, unsigned long *flags)
+int of_clk_detect_critical(struct device_node *np, int index,
+			   unsigned long *flags)
 {
 	struct property *prop;
 	const __be32 *cur;
diff --git a/drivers/clk/imx/clk-composite-8m.c b/drivers/clk/imx/clk-composite-8m.c
index 20f7c91..9977351 100644
--- a/drivers/clk/imx/clk-composite-8m.c
+++ b/drivers/clk/imx/clk-composite-8m.c
@@ -15,6 +15,7 @@
 #define PCG_PREDIV_MAX		8
 
 #define PCG_DIV_SHIFT		0
+#define PCG_CORE_DIV_WIDTH	3
 #define PCG_DIV_WIDTH		6
 #define PCG_DIV_MAX		64
 
@@ -91,7 +92,7 @@ static int imx8m_clk_composite_divider_set_rate(struct clk_hw *hw,
 					unsigned long parent_rate)
 {
 	struct clk_divider *divider = to_clk_divider(hw);
-	unsigned long flags = 0;
+	unsigned long flags;
 	int prediv_value;
 	int div_value;
 	int ret;
@@ -126,6 +127,7 @@ static const struct clk_ops imx8m_clk_composite_divider_ops = {
 struct clk_hw *imx8m_clk_hw_composite_flags(const char *name,
 					const char * const *parent_names,
 					int num_parents, void __iomem *reg,
+					u32 composite_flags,
 					unsigned long flags)
 {
 	struct clk_hw *hw = ERR_PTR(-ENOMEM), *mux_hw;
@@ -133,6 +135,7 @@ struct clk_hw *imx8m_clk_hw_composite_flags(const char *name,
 	struct clk_divider *div = NULL;
 	struct clk_gate *gate = NULL;
 	struct clk_mux *mux = NULL;
+	const struct clk_ops *divider_ops;
 
 	mux = kzalloc(sizeof(*mux), GFP_KERNEL);
 	if (!mux)
@@ -150,8 +153,16 @@ struct clk_hw *imx8m_clk_hw_composite_flags(const char *name,
 
 	div_hw = &div->hw;
 	div->reg = reg;
-	div->shift = PCG_PREDIV_SHIFT;
-	div->width = PCG_PREDIV_WIDTH;
+	if (composite_flags & IMX_COMPOSITE_CORE) {
+		div->shift = PCG_DIV_SHIFT;
+		div->width = PCG_CORE_DIV_WIDTH;
+		divider_ops = &clk_divider_ops;
+	} else {
+		div->shift = PCG_PREDIV_SHIFT;
+		div->width = PCG_PREDIV_WIDTH;
+		divider_ops = &imx8m_clk_composite_divider_ops;
+	}
+
 	div->lock = &imx_ccm_lock;
 	div->flags = CLK_DIVIDER_ROUND_CLOSEST;
 
@@ -166,8 +177,7 @@ struct clk_hw *imx8m_clk_hw_composite_flags(const char *name,
 
 	hw = clk_hw_register_composite(NULL, name, parent_names, num_parents,
 			mux_hw, &clk_mux_ops, div_hw,
-			&imx8m_clk_composite_divider_ops,
-			gate_hw, &clk_gate_ops, flags);
+			divider_ops, gate_hw, &clk_gate_ops, flags);
 	if (IS_ERR(hw))
 		goto fail;
 
diff --git a/drivers/clk/imx/clk-fixup-div.c b/drivers/clk/imx/clk-fixup-div.c
index 4b17b91..100ca82 100644
--- a/drivers/clk/imx/clk-fixup-div.c
+++ b/drivers/clk/imx/clk-fixup-div.c
@@ -55,7 +55,7 @@ static int clk_fixup_div_set_rate(struct clk_hw *hw, unsigned long rate,
 	struct clk_fixup_div *fixup_div = to_clk_fixup_div(hw);
 	struct clk_divider *div = to_clk_divider(hw);
 	unsigned int divider, value;
-	unsigned long flags = 0;
+	unsigned long flags;
 	u32 val;
 
 	divider = parent_rate / rate;
diff --git a/drivers/clk/imx/clk-fixup-mux.c b/drivers/clk/imx/clk-fixup-mux.c
index b569d91..58a6763 100644
--- a/drivers/clk/imx/clk-fixup-mux.c
+++ b/drivers/clk/imx/clk-fixup-mux.c
@@ -42,7 +42,7 @@ static int clk_fixup_mux_set_parent(struct clk_hw *hw, u8 index)
 {
 	struct clk_fixup_mux *fixup_mux = to_clk_fixup_mux(hw);
 	struct clk_mux *mux = to_clk_mux(hw);
-	unsigned long flags = 0;
+	unsigned long flags;
 	u32 val;
 
 	spin_lock_irqsave(mux->lock, flags);
diff --git a/drivers/clk/imx/clk-gate2.c b/drivers/clk/imx/clk-gate2.c
index 7d44ce8..ce0060e 100644
--- a/drivers/clk/imx/clk-gate2.c
+++ b/drivers/clk/imx/clk-gate2.c
@@ -40,7 +40,7 @@ static int clk_gate2_enable(struct clk_hw *hw)
 {
 	struct clk_gate2 *gate = to_clk_gate2(hw);
 	u32 reg;
-	unsigned long flags = 0;
+	unsigned long flags;
 
 	spin_lock_irqsave(gate->lock, flags);
 
@@ -62,7 +62,7 @@ static void clk_gate2_disable(struct clk_hw *hw)
 {
 	struct clk_gate2 *gate = to_clk_gate2(hw);
 	u32 reg;
-	unsigned long flags = 0;
+	unsigned long flags;
 
 	spin_lock_irqsave(gate->lock, flags);
 
@@ -101,7 +101,7 @@ static int clk_gate2_is_enabled(struct clk_hw *hw)
 static void clk_gate2_disable_unused(struct clk_hw *hw)
 {
 	struct clk_gate2 *gate = to_clk_gate2(hw);
-	unsigned long flags = 0;
+	unsigned long flags;
 	u32 reg;
 
 	spin_lock_irqsave(gate->lock, flags);
@@ -154,7 +154,7 @@ struct clk_hw *clk_hw_register_gate2(struct device *dev, const char *name,
 	gate->hw.init = &init;
 	hw = &gate->hw;
 
-	ret = clk_hw_register(NULL, hw);
+	ret = clk_hw_register(dev, hw);
 	if (ret) {
 		kfree(gate);
 		return ERR_PTR(ret);
diff --git a/drivers/clk/imx/clk-imx6sl.c b/drivers/clk/imx/clk-imx6sl.c
index 4bd44d8..0f647d1 100644
--- a/drivers/clk/imx/clk-imx6sl.c
+++ b/drivers/clk/imx/clk-imx6sl.c
@@ -208,6 +208,7 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6sl-anatop");
 	base = of_iomap(np, 0);
 	WARN_ON(!base);
+	of_node_put(np);
 	anatop_base = base;
 
 	hws[IMX6SL_PLL1_BYPASS_SRC] = imx_clk_hw_mux("pll1_bypass_src", base + 0x00, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
diff --git a/drivers/clk/imx/clk-imx7d.c b/drivers/clk/imx/clk-imx7d.c
index 0c9f7ad..b2057bd 100644
--- a/drivers/clk/imx/clk-imx7d.c
+++ b/drivers/clk/imx/clk-imx7d.c
@@ -802,6 +802,7 @@ static void __init imx7d_clocks_init(struct device_node *ccm_node)
 	hws[IMX7D_PCIE_PHY_ROOT_CLK] = imx_clk_hw_gate4("pcie_phy_root_clk", "pcie_phy_post_div", base + 0x4600, 0);
 	hws[IMX7D_EPDC_PIXEL_ROOT_CLK] = imx_clk_hw_gate4("epdc_pixel_root_clk", "epdc_pixel_post_div", base + 0x44a0, 0);
 	hws[IMX7D_LCDIF_PIXEL_ROOT_CLK] = imx_clk_hw_gate4("lcdif_pixel_root_clk", "lcdif_pixel_post_div", base + 0x44b0, 0);
+	hws[IMX7D_PXP_CLK] = imx_clk_hw_gate4("pxp_clk", "main_axi_root_clk", base + 0x44c0, 0);
 	hws[IMX7D_MIPI_DSI_ROOT_CLK] = imx_clk_hw_gate4("mipi_dsi_root_clk", "mipi_dsi_post_div", base + 0x4650, 0);
 	hws[IMX7D_MIPI_CSI_ROOT_CLK] = imx_clk_hw_gate4("mipi_csi_root_clk", "mipi_csi_post_div", base + 0x4640, 0);
 	hws[IMX7D_MIPI_DPHY_ROOT_CLK] = imx_clk_hw_gate4("mipi_dphy_root_clk", "mipi_dphy_post_div", base + 0x4660, 0);
diff --git a/drivers/clk/imx/clk-imx7ulp.c b/drivers/clk/imx/clk-imx7ulp.c
index 0620d6c..3710aa0 100644
--- a/drivers/clk/imx/clk-imx7ulp.c
+++ b/drivers/clk/imx/clk-imx7ulp.c
@@ -8,7 +8,7 @@
  */
 
 #include <dt-bindings/clock/imx7ulp-clock.h>
-#include <linux/clk.h>
+#include <linux/clk-provider.h>
 #include <linux/err.h>
 #include <linux/init.h>
 #include <linux/io.h>
diff --git a/drivers/clk/imx/clk-imx8mm.c b/drivers/clk/imx/clk-imx8mm.c
index 2ed93fc..9256704 100644
--- a/drivers/clk/imx/clk-imx8mm.c
+++ b/drivers/clk/imx/clk-imx8mm.c
@@ -4,12 +4,10 @@
  */
 
 #include <dt-bindings/clock/imx8mm-clock.h>
-#include <linux/clk.h>
+#include <linux/clk-provider.h>
 #include <linux/err.h>
-#include <linux/init.h>
 #include <linux/io.h>
 #include <linux/module.h>
-#include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
@@ -41,6 +39,8 @@ static const char *sys_pll3_bypass_sels[] = {"sys_pll3", "sys_pll3_ref_sel", };
 static const char *imx8mm_a53_sels[] = {"osc_24m", "arm_pll_out", "sys_pll2_500m", "sys_pll2_1000m",
 					"sys_pll1_800m", "sys_pll1_400m", "audio_pll1_out", "sys_pll3_out", };
 
+static const char * const imx8mm_a53_core_sels[] = {"arm_a53_div", "arm_pll_out", };
+
 static const char *imx8mm_m4_sels[] = {"osc_24m", "sys_pll2_200m", "sys_pll2_250m", "sys_pll1_266m",
 				       "sys_pll1_800m", "audio_pll1_out", "video_pll1_out", "sys_pll3_out", };
 
@@ -283,8 +283,10 @@ static const char *imx8mm_vpu_h1_sels[] = {"osc_24m", "vpu_pll_out", "sys_pll1_8
 
 static const char *imx8mm_dram_core_sels[] = {"dram_pll_out", "dram_alt_root", };
 
-static const char *imx8mm_clko1_sels[] = {"osc_24m", "sys_pll1_800m", "osc_27m", "sys_pll1_200m", "audio_pll2_out",
-					 "vpu_pll", "sys_pll1_80m", };
+static const char *imx8mm_clko1_sels[] = {"osc_24m", "sys_pll1_800m", "dummy", "sys_pll1_200m",
+					  "audio_pll2_out", "sys_pll2_500m", "vpu_pll", "sys_pll1_80m", };
+static const char *imx8mm_clko2_sels[] = {"osc_24m", "sys_pll2_200m", "sys_pll1_400m", "sys_pll2_166m",
+					  "sys_pll3_out", "audio_pll1_out", "video_pll1_out", "osc_32k", };
 
 static struct clk_hw_onecell_data *clk_hw_data;
 static struct clk_hw **hws;
@@ -322,6 +324,7 @@ static int imx8mm_clocks_probe(struct platform_device *pdev)
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx8mm-anatop");
 	base = of_iomap(np, 0);
+	of_node_put(np);
 	if (WARN_ON(!base))
 		return -ENOMEM;
 
@@ -414,20 +417,30 @@ static int imx8mm_clocks_probe(struct platform_device *pdev)
 
 	/* Core Slice */
 	hws[IMX8MM_CLK_A53_SRC] = imx_clk_hw_mux2("arm_a53_src", base + 0x8000, 24, 3, imx8mm_a53_sels, ARRAY_SIZE(imx8mm_a53_sels));
-	hws[IMX8MM_CLK_M4_SRC] = imx_clk_hw_mux2("arm_m4_src", base + 0x8080, 24, 3, imx8mm_m4_sels, ARRAY_SIZE(imx8mm_m4_sels));
-	hws[IMX8MM_CLK_VPU_SRC] = imx_clk_hw_mux2("vpu_src", base + 0x8100, 24, 3, imx8mm_vpu_sels, ARRAY_SIZE(imx8mm_vpu_sels));
-	hws[IMX8MM_CLK_GPU3D_SRC] = imx_clk_hw_mux2("gpu3d_src", base + 0x8180, 24, 3,  imx8mm_gpu3d_sels, ARRAY_SIZE(imx8mm_gpu3d_sels));
-	hws[IMX8MM_CLK_GPU2D_SRC] = imx_clk_hw_mux2("gpu2d_src", base + 0x8200, 24, 3, imx8mm_gpu2d_sels,  ARRAY_SIZE(imx8mm_gpu2d_sels));
 	hws[IMX8MM_CLK_A53_CG] = imx_clk_hw_gate3("arm_a53_cg", "arm_a53_src", base + 0x8000, 28);
-	hws[IMX8MM_CLK_M4_CG] = imx_clk_hw_gate3("arm_m4_cg", "arm_m4_src", base + 0x8080, 28);
-	hws[IMX8MM_CLK_VPU_CG] = imx_clk_hw_gate3("vpu_cg", "vpu_src", base + 0x8100, 28);
-	hws[IMX8MM_CLK_GPU3D_CG] = imx_clk_hw_gate3("gpu3d_cg", "gpu3d_src", base + 0x8180, 28);
-	hws[IMX8MM_CLK_GPU2D_CG] = imx_clk_hw_gate3("gpu2d_cg", "gpu2d_src", base + 0x8200, 28);
 	hws[IMX8MM_CLK_A53_DIV] = imx_clk_hw_divider2("arm_a53_div", "arm_a53_cg", base + 0x8000, 0, 3);
-	hws[IMX8MM_CLK_M4_DIV] = imx_clk_hw_divider2("arm_m4_div", "arm_m4_cg", base + 0x8080, 0, 3);
-	hws[IMX8MM_CLK_VPU_DIV] = imx_clk_hw_divider2("vpu_div", "vpu_cg", base + 0x8100, 0, 3);
-	hws[IMX8MM_CLK_GPU3D_DIV] = imx_clk_hw_divider2("gpu3d_div", "gpu3d_cg", base + 0x8180, 0, 3);
-	hws[IMX8MM_CLK_GPU2D_DIV] = imx_clk_hw_divider2("gpu2d_div", "gpu2d_cg", base + 0x8200, 0, 3);
+
+	hws[IMX8MM_CLK_M4_CORE] = imx8m_clk_hw_composite_core("arm_m4_core", imx8mm_m4_sels, base + 0x8080);
+	hws[IMX8MM_CLK_VPU_CORE] = imx8m_clk_hw_composite_core("vpu_core", imx8mm_vpu_sels, base + 0x8100);
+	hws[IMX8MM_CLK_GPU3D_CORE] = imx8m_clk_hw_composite_core("gpu3d_core", imx8mm_gpu3d_sels, base + 0x8180);
+	hws[IMX8MM_CLK_GPU2D_CORE] = imx8m_clk_hw_composite_core("gpu2d_core", imx8mm_gpu2d_sels, base + 0x8200);
+
+	/* For backwards compatibility */
+	hws[IMX8MM_CLK_M4_SRC] = hws[IMX8MM_CLK_M4_CORE];
+	hws[IMX8MM_CLK_M4_CG] = hws[IMX8MM_CLK_M4_CORE];
+	hws[IMX8MM_CLK_M4_DIV] = hws[IMX8MM_CLK_M4_CORE];
+	hws[IMX8MM_CLK_VPU_SRC] = hws[IMX8MM_CLK_VPU_CORE];
+	hws[IMX8MM_CLK_VPU_CG] = hws[IMX8MM_CLK_VPU_CORE];
+	hws[IMX8MM_CLK_VPU_DIV] = hws[IMX8MM_CLK_VPU_CORE];
+	hws[IMX8MM_CLK_GPU3D_SRC] = hws[IMX8MM_CLK_GPU3D_CORE];
+	hws[IMX8MM_CLK_GPU3D_CG] = hws[IMX8MM_CLK_GPU3D_CORE];
+	hws[IMX8MM_CLK_GPU3D_DIV] = hws[IMX8MM_CLK_GPU3D_CORE];
+	hws[IMX8MM_CLK_GPU2D_SRC] = hws[IMX8MM_CLK_GPU2D_CORE];
+	hws[IMX8MM_CLK_GPU2D_CG] = hws[IMX8MM_CLK_GPU2D_CORE];
+	hws[IMX8MM_CLK_GPU2D_DIV] = hws[IMX8MM_CLK_GPU2D_CORE];
+
+	/* CORE SEL */
+	hws[IMX8MM_CLK_A53_CORE] = imx_clk_hw_mux2("arm_a53_core", base + 0x9880, 24, 1, imx8mm_a53_core_sels, ARRAY_SIZE(imx8mm_a53_core_sels));
 
 	/* BUS */
 	hws[IMX8MM_CLK_MAIN_AXI] = imx8m_clk_hw_composite_critical("main_axi",  imx8mm_main_axi_sels, base + 0x8800);
@@ -504,6 +517,7 @@ static int imx8mm_clocks_probe(struct platform_device *pdev)
 	hws[IMX8MM_CLK_WDOG] = imx8m_clk_hw_composite("wdog", imx8mm_wdog_sels, base + 0xb900);
 	hws[IMX8MM_CLK_WRCLK] = imx8m_clk_hw_composite("wrclk", imx8mm_wrclk_sels, base + 0xb980);
 	hws[IMX8MM_CLK_CLKO1] = imx8m_clk_hw_composite("clko1", imx8mm_clko1_sels, base + 0xba00);
+	hws[IMX8MM_CLK_CLKO2] = imx8m_clk_hw_composite("clko2", imx8mm_clko2_sels, base + 0xba80);
 	hws[IMX8MM_CLK_DSI_CORE] = imx8m_clk_hw_composite("dsi_core", imx8mm_dsi_core_sels, base + 0xbb00);
 	hws[IMX8MM_CLK_DSI_PHY_REF] = imx8m_clk_hw_composite("dsi_phy_ref", imx8mm_dsi_phy_sels, base + 0xbb80);
 	hws[IMX8MM_CLK_DSI_DBI] = imx8m_clk_hw_composite("dsi_dbi", imx8mm_dsi_dbi_sels, base + 0xbc00);
@@ -564,7 +578,7 @@ static int imx8mm_clocks_probe(struct platform_device *pdev)
 	hws[IMX8MM_CLK_UART3_ROOT] = imx_clk_hw_gate4("uart3_root_clk", "uart3", base + 0x44b0, 0);
 	hws[IMX8MM_CLK_UART4_ROOT] = imx_clk_hw_gate4("uart4_root_clk", "uart4", base + 0x44c0, 0);
 	hws[IMX8MM_CLK_USB1_CTRL_ROOT] = imx_clk_hw_gate4("usb1_ctrl_root_clk", "usb_bus", base + 0x44d0, 0);
-	hws[IMX8MM_CLK_GPU3D_ROOT] = imx_clk_hw_gate4("gpu3d_root_clk", "gpu3d_div", base + 0x44f0, 0);
+	hws[IMX8MM_CLK_GPU3D_ROOT] = imx_clk_hw_gate4("gpu3d_root_clk", "gpu3d_core", base + 0x44f0, 0);
 	hws[IMX8MM_CLK_USDHC1_ROOT] = imx_clk_hw_gate4("usdhc1_root_clk", "usdhc1", base + 0x4510, 0);
 	hws[IMX8MM_CLK_USDHC2_ROOT] = imx_clk_hw_gate4("usdhc2_root_clk", "usdhc2", base + 0x4520, 0);
 	hws[IMX8MM_CLK_WDOG1_ROOT] = imx_clk_hw_gate4("wdog1_root_clk", "wdog", base + 0x4530, 0);
@@ -586,7 +600,7 @@ static int imx8mm_clocks_probe(struct platform_device *pdev)
 	hws[IMX8MM_CLK_SDMA1_ROOT] = imx_clk_hw_gate4("sdma1_clk", "ipg_root", base + 0x43a0, 0);
 	hws[IMX8MM_CLK_SDMA2_ROOT] = imx_clk_hw_gate4("sdma2_clk", "ipg_audio_root", base + 0x43b0, 0);
 	hws[IMX8MM_CLK_SDMA3_ROOT] = imx_clk_hw_gate4("sdma3_clk", "ipg_audio_root", base + 0x45f0, 0);
-	hws[IMX8MM_CLK_GPU2D_ROOT] = imx_clk_hw_gate4("gpu2d_root_clk", "gpu2d_div", base + 0x4660, 0);
+	hws[IMX8MM_CLK_GPU2D_ROOT] = imx_clk_hw_gate4("gpu2d_root_clk", "gpu2d_core", base + 0x4660, 0);
 	hws[IMX8MM_CLK_CSI1_ROOT] = imx_clk_hw_gate4("csi1_root_clk", "csi1_core", base + 0x4650, 0);
 
 	hws[IMX8MM_CLK_GPT_3M] = imx_clk_hw_fixed_factor("gpt_3m", "osc_24m", 1, 8);
@@ -594,11 +608,14 @@ static int imx8mm_clocks_probe(struct platform_device *pdev)
 	hws[IMX8MM_CLK_DRAM_ALT_ROOT] = imx_clk_hw_fixed_factor("dram_alt_root", "dram_alt", 1, 4);
 	hws[IMX8MM_CLK_DRAM_CORE] = imx_clk_hw_mux2_flags("dram_core_clk", base + 0x9800, 24, 1, imx8mm_dram_core_sels, ARRAY_SIZE(imx8mm_dram_core_sels), CLK_IS_CRITICAL);
 
-	hws[IMX8MM_CLK_ARM] = imx_clk_hw_cpu("arm", "arm_a53_div",
-					   hws[IMX8MM_CLK_A53_DIV]->clk,
-					   hws[IMX8MM_CLK_A53_SRC]->clk,
+	hws[IMX8MM_CLK_ARM] = imx_clk_hw_cpu("arm", "arm_a53_core",
+					   hws[IMX8MM_CLK_A53_CORE]->clk,
+					   hws[IMX8MM_CLK_A53_CORE]->clk,
 					   hws[IMX8MM_ARM_PLL_OUT]->clk,
-					   hws[IMX8MM_SYS_PLL1_800M]->clk);
+					   hws[IMX8MM_CLK_A53_DIV]->clk);
+
+	clk_hw_set_parent(hws[IMX8MM_CLK_A53_SRC], hws[IMX8MM_SYS_PLL1_800M]);
+	clk_hw_set_parent(hws[IMX8MM_CLK_A53_CORE], hws[IMX8MM_ARM_PLL_OUT]);
 
 	imx_check_clk_hws(hws, IMX8MM_CLK_END);
 
diff --git a/drivers/clk/imx/clk-imx8mn.c b/drivers/clk/imx/clk-imx8mn.c
index c5e7316..0bc7070 100644
--- a/drivers/clk/imx/clk-imx8mn.c
+++ b/drivers/clk/imx/clk-imx8mn.c
@@ -4,12 +4,10 @@
  */
 
 #include <dt-bindings/clock/imx8mn-clock.h>
-#include <linux/clk.h>
+#include <linux/clk-provider.h>
 #include <linux/err.h>
-#include <linux/init.h>
 #include <linux/io.h>
 #include <linux/module.h>
-#include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
@@ -40,6 +38,8 @@ static const char * const imx8mn_a53_sels[] = {"osc_24m", "arm_pll_out", "sys_pl
 					       "sys_pll2_1000m", "sys_pll1_800m", "sys_pll1_400m",
 					       "audio_pll1_out", "sys_pll3_out", };
 
+static const char * const imx8mn_a53_core_sels[] = {"arm_a53_div", "arm_pll_out", };
+
 static const char * const imx8mn_gpu_core_sels[] = {"osc_24m", "gpu_pll_out", "sys_pll1_800m",
 						    "sys_pll3_out", "sys_pll2_1000m", "audio_pll1_out",
 						    "video_pll1_out", "audio_pll2_out", };
@@ -317,6 +317,7 @@ static int imx8mn_clocks_probe(struct platform_device *pdev)
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx8mn-anatop");
 	base = of_iomap(np, 0);
+	of_node_put(np);
 	if (WARN_ON(!base)) {
 		ret = -ENOMEM;
 		goto unregister_hws;
@@ -413,15 +414,21 @@ static int imx8mn_clocks_probe(struct platform_device *pdev)
 
 	/* CORE */
 	hws[IMX8MN_CLK_A53_SRC] = imx_clk_hw_mux2("arm_a53_src", base + 0x8000, 24, 3, imx8mn_a53_sels, ARRAY_SIZE(imx8mn_a53_sels));
-	hws[IMX8MN_CLK_GPU_CORE_SRC] = imx_clk_hw_mux2("gpu_core_src", base + 0x8180, 24, 3,  imx8mn_gpu_core_sels, ARRAY_SIZE(imx8mn_gpu_core_sels));
-	hws[IMX8MN_CLK_GPU_SHADER_SRC] = imx_clk_hw_mux2("gpu_shader_src", base + 0x8200, 24, 3, imx8mn_gpu_shader_sels,  ARRAY_SIZE(imx8mn_gpu_shader_sels));
 	hws[IMX8MN_CLK_A53_CG] = imx_clk_hw_gate3("arm_a53_cg", "arm_a53_src", base + 0x8000, 28);
-	hws[IMX8MN_CLK_GPU_CORE_CG] = imx_clk_hw_gate3("gpu_core_cg", "gpu_core_src", base + 0x8180, 28);
-	hws[IMX8MN_CLK_GPU_SHADER_CG] = imx_clk_hw_gate3("gpu_shader_cg", "gpu_shader_src", base + 0x8200, 28);
-
 	hws[IMX8MN_CLK_A53_DIV] = imx_clk_hw_divider2("arm_a53_div", "arm_a53_cg", base + 0x8000, 0, 3);
-	hws[IMX8MN_CLK_GPU_CORE_DIV] = imx_clk_hw_divider2("gpu_core_div", "gpu_core_cg", base + 0x8180, 0, 3);
-	hws[IMX8MN_CLK_GPU_SHADER_DIV] = imx_clk_hw_divider2("gpu_shader_div", "gpu_shader_cg", base + 0x8200, 0, 3);
+
+	hws[IMX8MN_CLK_GPU_CORE] = imx8m_clk_hw_composite_core("gpu_core", imx8mn_gpu_core_sels, base + 0x8180);
+	hws[IMX8MN_CLK_GPU_SHADER] = imx8m_clk_hw_composite_core("gpu_shader", imx8mn_gpu_shader_sels, base + 0x8200);
+
+	hws[IMX8MN_CLK_GPU_CORE_SRC] = hws[IMX8MN_CLK_GPU_CORE];
+	hws[IMX8MN_CLK_GPU_CORE_CG] = hws[IMX8MN_CLK_GPU_CORE];
+	hws[IMX8MN_CLK_GPU_CORE_DIV] = hws[IMX8MN_CLK_GPU_CORE];
+	hws[IMX8MN_CLK_GPU_SHADER_SRC] = hws[IMX8MN_CLK_GPU_SHADER];
+	hws[IMX8MN_CLK_GPU_SHADER_CG] = hws[IMX8MN_CLK_GPU_SHADER];
+	hws[IMX8MN_CLK_GPU_SHADER_DIV] = hws[IMX8MN_CLK_GPU_SHADER];
+
+	/* CORE SEL */
+	hws[IMX8MN_CLK_A53_CORE] = imx_clk_hw_mux2("arm_a53_core", base + 0x9880, 24, 1, imx8mn_a53_core_sels, ARRAY_SIZE(imx8mn_a53_core_sels));
 
 	/* BUS */
 	hws[IMX8MN_CLK_MAIN_AXI] = imx8m_clk_hw_composite_critical("main_axi", imx8mn_main_axi_sels, base + 0x8800);
@@ -523,12 +530,13 @@ static int imx8mn_clocks_probe(struct platform_device *pdev)
 	hws[IMX8MN_CLK_SAI5_IPG] = imx_clk_hw_gate2_shared2("sai5_ipg_clk", "ipg_audio_root", base + 0x4370, 0, &share_count_sai5);
 	hws[IMX8MN_CLK_SAI6_ROOT] = imx_clk_hw_gate2_shared2("sai6_root_clk", "sai6", base + 0x4380, 0, &share_count_sai6);
 	hws[IMX8MN_CLK_SAI6_IPG] = imx_clk_hw_gate2_shared2("sai6_ipg_clk", "ipg_audio_root", base + 0x4380, 0, &share_count_sai6);
+	hws[IMX8MN_CLK_SNVS_ROOT] = imx_clk_hw_gate4("snvs_root_clk", "ipg_root", base + 0x4470, 0);
 	hws[IMX8MN_CLK_UART1_ROOT] = imx_clk_hw_gate4("uart1_root_clk", "uart1", base + 0x4490, 0);
 	hws[IMX8MN_CLK_UART2_ROOT] = imx_clk_hw_gate4("uart2_root_clk", "uart2", base + 0x44a0, 0);
 	hws[IMX8MN_CLK_UART3_ROOT] = imx_clk_hw_gate4("uart3_root_clk", "uart3", base + 0x44b0, 0);
 	hws[IMX8MN_CLK_UART4_ROOT] = imx_clk_hw_gate4("uart4_root_clk", "uart4", base + 0x44c0, 0);
 	hws[IMX8MN_CLK_USB1_CTRL_ROOT] = imx_clk_hw_gate4("usb1_ctrl_root_clk", "usb_bus", base + 0x44d0, 0);
-	hws[IMX8MN_CLK_GPU_CORE_ROOT] = imx_clk_hw_gate4("gpu_core_root_clk", "gpu_core_div", base + 0x44f0, 0);
+	hws[IMX8MN_CLK_GPU_CORE_ROOT] = imx_clk_hw_gate4("gpu_core_root_clk", "gpu_core", base + 0x44f0, 0);
 	hws[IMX8MN_CLK_USDHC1_ROOT] = imx_clk_hw_gate4("usdhc1_root_clk", "usdhc1", base + 0x4510, 0);
 	hws[IMX8MN_CLK_USDHC2_ROOT] = imx_clk_hw_gate4("usdhc2_root_clk", "usdhc2", base + 0x4520, 0);
 	hws[IMX8MN_CLK_WDOG1_ROOT] = imx_clk_hw_gate4("wdog1_root_clk", "wdog", base + 0x4530, 0);
@@ -551,11 +559,14 @@ static int imx8mn_clocks_probe(struct platform_device *pdev)
 
 	hws[IMX8MN_CLK_DRAM_ALT_ROOT] = imx_clk_hw_fixed_factor("dram_alt_root", "dram_alt", 1, 4);
 
-	hws[IMX8MN_CLK_ARM] = imx_clk_hw_cpu("arm", "arm_a53_div",
-					   hws[IMX8MN_CLK_A53_DIV]->clk,
-					   hws[IMX8MN_CLK_A53_SRC]->clk,
+	hws[IMX8MN_CLK_ARM] = imx_clk_hw_cpu("arm", "arm_a53_core",
+					   hws[IMX8MN_CLK_A53_CORE]->clk,
+					   hws[IMX8MN_CLK_A53_CORE]->clk,
 					   hws[IMX8MN_ARM_PLL_OUT]->clk,
-					   hws[IMX8MN_SYS_PLL1_800M]->clk);
+					   hws[IMX8MN_CLK_A53_DIV]->clk);
+
+	clk_hw_set_parent(hws[IMX8MN_CLK_A53_SRC], hws[IMX8MN_SYS_PLL1_800M]);
+	clk_hw_set_parent(hws[IMX8MN_CLK_A53_CORE], hws[IMX8MN_ARM_PLL_OUT]);
 
 	imx_check_clk_hws(hws, IMX8MN_CLK_END);
 
diff --git a/drivers/clk/imx/clk-imx8mp.c b/drivers/clk/imx/clk-imx8mp.c
index cf19290..41469e2 100644
--- a/drivers/clk/imx/clk-imx8mp.c
+++ b/drivers/clk/imx/clk-imx8mp.c
@@ -4,13 +4,13 @@
  */
 
 #include <dt-bindings/clock/imx8mp-clock.h>
-#include <linux/clkdev.h>
 #include <linux/clk-provider.h>
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of_address.h>
 #include <linux/platform_device.h>
+#include <linux/slab.h>
 #include <linux/types.h>
 
 #include "clk.h"
@@ -34,6 +34,8 @@ static const char * const imx8mp_a53_sels[] = {"osc_24m", "arm_pll_out", "sys_pl
 					       "sys_pll2_1000m", "sys_pll1_800m", "sys_pll1_400m",
 					       "audio_pll1_out", "sys_pll3_out", };
 
+static const char * const imx8mp_a53_core_sels[] = {"arm_a53_div", "arm_pll_out", };
+
 static const char * const imx8mp_m7_sels[] = {"osc_24m", "sys_pll2_200m", "sys_pll2_250m",
 					      "vpu_pll_out", "sys_pll1_800m", "audio_pll1_out",
 					      "video_pll1_out", "sys_pll3_out", };
@@ -342,7 +344,7 @@ static const char * const imx8mp_hdmi_fdcc_tst_sels[] = {"osc_24m", "sys_pll1_26
 							 "sys_pll1_800m", "sys_pll2_1000m", "sys_pll3_out",
 							 "audio_pll2_out", "video_pll1_out", };
 
-static const char * const imx8mp_hdmi_27m_sels[] = {"osc_24m", "sys_pll1_160m", "sys_pll2_50m",
+static const char * const imx8mp_hdmi_24m_sels[] = {"osc_24m", "sys_pll1_160m", "sys_pll2_50m",
 						    "sys_pll3_out", "audio_pll1_out", "video_pll1_out",
 						    "audio_pll2_out", "sys_pll1_133m", };
 
@@ -434,6 +436,7 @@ static int imx8mp_clocks_probe(struct platform_device *pdev)
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx8mp-anatop");
 	anatop_base = of_iomap(np, 0);
+	of_node_put(np);
 	if (WARN_ON(!anatop_base))
 		return -ENOMEM;
 
@@ -553,6 +556,9 @@ static int imx8mp_clocks_probe(struct platform_device *pdev)
 	hws[IMX8MP_CLK_HSIO_AXI_DIV] = imx_clk_hw_divider2("hsio_axi_div", "hsio_axi_cg", ccm_base + 0x8380, 0, 3);
 	hws[IMX8MP_CLK_MEDIA_ISP_DIV] = imx_clk_hw_divider2("media_isp_div", "media_isp_cg", ccm_base + 0x8400, 0, 3);
 
+	/* CORE SEL */
+	hws[IMX8MP_CLK_A53_CORE] = imx_clk_hw_mux2("arm_a53_core", ccm_base + 0x9880, 24, 1, imx8mp_a53_core_sels, ARRAY_SIZE(imx8mp_a53_core_sels));
+
 	hws[IMX8MP_CLK_MAIN_AXI] = imx8m_clk_hw_composite_critical("main_axi", imx8mp_main_axi_sels, ccm_base + 0x8800);
 	hws[IMX8MP_CLK_ENET_AXI] = imx8m_clk_hw_composite("enet_axi", imx8mp_enet_axi_sels, ccm_base + 0x8880);
 	hws[IMX8MP_CLK_NAND_USDHC_BUS] = imx8m_clk_hw_composite_critical("nand_usdhc_bus", imx8mp_nand_usdhc_sels, ccm_base + 0x8900);
@@ -631,7 +637,7 @@ static int imx8mp_clocks_probe(struct platform_device *pdev)
 	hws[IMX8MP_CLK_IPP_DO_CLKO1] = imx8m_clk_hw_composite("ipp_do_clko1", imx8mp_ipp_do_clko1_sels, ccm_base + 0xba00);
 	hws[IMX8MP_CLK_IPP_DO_CLKO2] = imx8m_clk_hw_composite("ipp_do_clko2", imx8mp_ipp_do_clko2_sels, ccm_base + 0xba80);
 	hws[IMX8MP_CLK_HDMI_FDCC_TST] = imx8m_clk_hw_composite("hdmi_fdcc_tst", imx8mp_hdmi_fdcc_tst_sels, ccm_base + 0xbb00);
-	hws[IMX8MP_CLK_HDMI_27M] = imx8m_clk_hw_composite("hdmi_27m", imx8mp_hdmi_27m_sels, ccm_base + 0xbb80);
+	hws[IMX8MP_CLK_HDMI_24M] = imx8m_clk_hw_composite("hdmi_24m", imx8mp_hdmi_24m_sels, ccm_base + 0xbb80);
 	hws[IMX8MP_CLK_HDMI_REF_266M] = imx8m_clk_hw_composite("hdmi_ref_266m", imx8mp_hdmi_ref_266m_sels, ccm_base + 0xbc00);
 	hws[IMX8MP_CLK_USDHC3] = imx8m_clk_hw_composite("usdhc3", imx8mp_usdhc3_sels, ccm_base + 0xbc80);
 	hws[IMX8MP_CLK_MEDIA_CAM1_PIX] = imx8m_clk_hw_composite("media_cam1_pix", imx8mp_media_cam1_pix_sels, ccm_base + 0xbd00);
@@ -671,6 +677,7 @@ static int imx8mp_clocks_probe(struct platform_device *pdev)
 	hws[IMX8MP_CLK_I2C2_ROOT] = imx_clk_hw_gate4("i2c2_root_clk", "i2c2", ccm_base + 0x4180, 0);
 	hws[IMX8MP_CLK_I2C3_ROOT] = imx_clk_hw_gate4("i2c3_root_clk", "i2c3", ccm_base + 0x4190, 0);
 	hws[IMX8MP_CLK_I2C4_ROOT] = imx_clk_hw_gate4("i2c4_root_clk", "i2c4", ccm_base + 0x41a0, 0);
+	hws[IMX8MP_CLK_OCOTP_ROOT] = imx_clk_hw_gate4("ocotp_root_clk", "ipg_root", ccm_base + 0x4220, 0);
 	hws[IMX8MP_CLK_PCIE_ROOT] = imx_clk_hw_gate4("pcie_root_clk", "pcie_aux", ccm_base + 0x4250, 0);
 	hws[IMX8MP_CLK_PWM1_ROOT] = imx_clk_hw_gate4("pwm1_root_clk", "pwm1", ccm_base + 0x4280, 0);
 	hws[IMX8MP_CLK_PWM2_ROOT] = imx_clk_hw_gate4("pwm2_root_clk", "pwm2", ccm_base + 0x4290, 0);
@@ -722,11 +729,14 @@ static int imx8mp_clocks_probe(struct platform_device *pdev)
 	hws[IMX8MP_CLK_VPU_ROOT] = imx_clk_hw_gate4("vpu_root_clk", "vpu_bus", ccm_base + 0x4630, 0);
 	hws[IMX8MP_CLK_AUDIO_ROOT] = imx_clk_hw_gate4("audio_root_clk", "ipg_root", ccm_base + 0x4650, 0);
 
-	hws[IMX8MP_CLK_ARM] = imx_clk_hw_cpu("arm", "arm_a53_div",
-					     hws[IMX8MP_CLK_A53_DIV]->clk,
-					     hws[IMX8MP_CLK_A53_SRC]->clk,
+	hws[IMX8MP_CLK_ARM] = imx_clk_hw_cpu("arm", "arm_a53_core",
+					     hws[IMX8MP_CLK_A53_CORE]->clk,
+					     hws[IMX8MP_CLK_A53_CORE]->clk,
 					     hws[IMX8MP_ARM_PLL_OUT]->clk,
-					     hws[IMX8MP_SYS_PLL1_800M]->clk);
+					     hws[IMX8MP_CLK_A53_DIV]->clk);
+
+	clk_hw_set_parent(hws[IMX8MP_CLK_A53_SRC], hws[IMX8MP_SYS_PLL1_800M]);
+	clk_hw_set_parent(hws[IMX8MP_CLK_A53_CORE], hws[IMX8MP_ARM_PLL_OUT]);
 
 	imx_check_clk_hws(hws, IMX8MP_CLK_END);
 
diff --git a/drivers/clk/imx/clk-imx8mq.c b/drivers/clk/imx/clk-imx8mq.c
index 4c0edca..fdc68db 100644
--- a/drivers/clk/imx/clk-imx8mq.c
+++ b/drivers/clk/imx/clk-imx8mq.c
@@ -5,7 +5,7 @@
  */
 
 #include <dt-bindings/clock/imx8mq-clock.h>
-#include <linux/clk.h>
+#include <linux/clk-provider.h>
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/module.h>
@@ -41,6 +41,8 @@ static const char * const video2_pll_out_sels[] = {"video2_pll1_ref_sel", };
 static const char * const imx8mq_a53_sels[] = {"osc_25m", "arm_pll_out", "sys2_pll_500m", "sys2_pll_1000m",
 					"sys1_pll_800m", "sys1_pll_400m", "audio_pll1_out", "sys3_pll_out", };
 
+static const char * const imx8mq_a53_core_sels[] = {"arm_a53_div", "arm_pll_out", };
+
 static const char * const imx8mq_arm_m4_sels[] = {"osc_25m", "sys2_pll_200m", "sys2_pll_250m", "sys1_pll_266m",
 					"sys1_pll_800m", "audio_pll1_out", "video_pll1_out", "sys3_pll_out", };
 
@@ -305,6 +307,7 @@ static int imx8mq_clocks_probe(struct platform_device *pdev)
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx8mq-anatop");
 	base = of_iomap(np, 0);
+	of_node_put(np);
 	if (WARN_ON(!base))
 		return -ENOMEM;
 
@@ -403,22 +406,29 @@ static int imx8mq_clocks_probe(struct platform_device *pdev)
 
 	/* CORE */
 	hws[IMX8MQ_CLK_A53_SRC] = imx_clk_hw_mux2("arm_a53_src", base + 0x8000, 24, 3, imx8mq_a53_sels, ARRAY_SIZE(imx8mq_a53_sels));
-	hws[IMX8MQ_CLK_M4_SRC] = imx_clk_hw_mux2("arm_m4_src", base + 0x8080, 24, 3, imx8mq_arm_m4_sels, ARRAY_SIZE(imx8mq_arm_m4_sels));
-	hws[IMX8MQ_CLK_VPU_SRC] = imx_clk_hw_mux2("vpu_src", base + 0x8100, 24, 3, imx8mq_vpu_sels, ARRAY_SIZE(imx8mq_vpu_sels));
-	hws[IMX8MQ_CLK_GPU_CORE_SRC] = imx_clk_hw_mux2("gpu_core_src", base + 0x8180, 24, 3,  imx8mq_gpu_core_sels, ARRAY_SIZE(imx8mq_gpu_core_sels));
-	hws[IMX8MQ_CLK_GPU_SHADER_SRC] = imx_clk_hw_mux2("gpu_shader_src", base + 0x8200, 24, 3, imx8mq_gpu_shader_sels,  ARRAY_SIZE(imx8mq_gpu_shader_sels));
-
 	hws[IMX8MQ_CLK_A53_CG] = imx_clk_hw_gate3_flags("arm_a53_cg", "arm_a53_src", base + 0x8000, 28, CLK_IS_CRITICAL);
-	hws[IMX8MQ_CLK_M4_CG] = imx_clk_hw_gate3("arm_m4_cg", "arm_m4_src", base + 0x8080, 28);
-	hws[IMX8MQ_CLK_VPU_CG] = imx_clk_hw_gate3("vpu_cg", "vpu_src", base + 0x8100, 28);
-	hws[IMX8MQ_CLK_GPU_CORE_CG] = imx_clk_hw_gate3("gpu_core_cg", "gpu_core_src", base + 0x8180, 28);
-	hws[IMX8MQ_CLK_GPU_SHADER_CG] = imx_clk_hw_gate3("gpu_shader_cg", "gpu_shader_src", base + 0x8200, 28);
-
 	hws[IMX8MQ_CLK_A53_DIV] = imx_clk_hw_divider2("arm_a53_div", "arm_a53_cg", base + 0x8000, 0, 3);
-	hws[IMX8MQ_CLK_M4_DIV] = imx_clk_hw_divider2("arm_m4_div", "arm_m4_cg", base + 0x8080, 0, 3);
-	hws[IMX8MQ_CLK_VPU_DIV] = imx_clk_hw_divider2("vpu_div", "vpu_cg", base + 0x8100, 0, 3);
-	hws[IMX8MQ_CLK_GPU_CORE_DIV] = imx_clk_hw_divider2("gpu_core_div", "gpu_core_cg", base + 0x8180, 0, 3);
-	hws[IMX8MQ_CLK_GPU_SHADER_DIV] = imx_clk_hw_divider2("gpu_shader_div", "gpu_shader_cg", base + 0x8200, 0, 3);
+
+	hws[IMX8MQ_CLK_M4_CORE] = imx8m_clk_hw_composite_core("arm_m4_core", imx8mq_arm_m4_sels, base + 0x8080);
+	hws[IMX8MQ_CLK_VPU_CORE] = imx8m_clk_hw_composite_core("vpu_core", imx8mq_vpu_sels, base + 0x8100);
+	hws[IMX8MQ_CLK_GPU_CORE] = imx8m_clk_hw_composite_core("gpu_core", imx8mq_gpu_core_sels, base + 0x8180);
+	hws[IMX8MQ_CLK_GPU_SHADER] = imx8m_clk_hw_composite("gpu_shader", imx8mq_gpu_shader_sels, base + 0x8200);
+	/* For backwards compatibility */
+	hws[IMX8MQ_CLK_M4_SRC] = hws[IMX8MQ_CLK_M4_CORE];
+	hws[IMX8MQ_CLK_M4_CG] = hws[IMX8MQ_CLK_M4_CORE];
+	hws[IMX8MQ_CLK_M4_DIV] = hws[IMX8MQ_CLK_M4_CORE];
+	hws[IMX8MQ_CLK_VPU_SRC] = hws[IMX8MQ_CLK_VPU_CORE];
+	hws[IMX8MQ_CLK_VPU_CG] = hws[IMX8MQ_CLK_VPU_CORE];
+	hws[IMX8MQ_CLK_VPU_DIV] = hws[IMX8MQ_CLK_VPU_CORE];
+	hws[IMX8MQ_CLK_GPU_CORE_SRC] = hws[IMX8MQ_CLK_GPU_CORE];
+	hws[IMX8MQ_CLK_GPU_CORE_CG] = hws[IMX8MQ_CLK_GPU_CORE];
+	hws[IMX8MQ_CLK_GPU_CORE_DIV] = hws[IMX8MQ_CLK_GPU_CORE];
+	hws[IMX8MQ_CLK_GPU_SHADER_SRC] = hws[IMX8MQ_CLK_GPU_SHADER];
+	hws[IMX8MQ_CLK_GPU_SHADER_CG] = hws[IMX8MQ_CLK_GPU_SHADER];
+	hws[IMX8MQ_CLK_GPU_SHADER_DIV] = hws[IMX8MQ_CLK_GPU_SHADER];
+
+	/* CORE SEL */
+	hws[IMX8MQ_CLK_A53_CORE] = imx_clk_hw_mux2("arm_a53_core", base + 0x9880, 24, 1, imx8mq_a53_core_sels, ARRAY_SIZE(imx8mq_a53_core_sels));
 
 	/* BUS */
 	hws[IMX8MQ_CLK_MAIN_AXI] = imx8m_clk_hw_composite_critical("main_axi", imx8mq_main_axi_sels, base + 0x8800);
@@ -567,7 +577,7 @@ static int imx8mq_clocks_probe(struct platform_device *pdev)
 	hws[IMX8MQ_CLK_WDOG2_ROOT] = imx_clk_hw_gate4("wdog2_root_clk", "wdog", base + 0x4540, 0);
 	hws[IMX8MQ_CLK_WDOG3_ROOT] = imx_clk_hw_gate4("wdog3_root_clk", "wdog", base + 0x4550, 0);
 	hws[IMX8MQ_CLK_VPU_G1_ROOT] = imx_clk_hw_gate2_flags("vpu_g1_root_clk", "vpu_g1", base + 0x4560, 0, CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE);
-	hws[IMX8MQ_CLK_GPU_ROOT] = imx_clk_hw_gate4("gpu_root_clk", "gpu_core_div", base + 0x4570, 0);
+	hws[IMX8MQ_CLK_GPU_ROOT] = imx_clk_hw_gate4("gpu_root_clk", "gpu_core", base + 0x4570, 0);
 	hws[IMX8MQ_CLK_VPU_G2_ROOT] = imx_clk_hw_gate2_flags("vpu_g2_root_clk", "vpu_g2", base + 0x45a0, 0, CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE);
 	hws[IMX8MQ_CLK_DISP_ROOT] = imx_clk_hw_gate2_shared2("disp_root_clk", "disp_dc8000", base + 0x45d0, 0, &share_count_dcss);
 	hws[IMX8MQ_CLK_DISP_AXI_ROOT]  = imx_clk_hw_gate2_shared2("disp_axi_root_clk", "disp_axi", base + 0x45d0, 0, &share_count_dcss);
@@ -583,11 +593,14 @@ static int imx8mq_clocks_probe(struct platform_device *pdev)
 	hws[IMX8MQ_GPT_3M_CLK] = imx_clk_hw_fixed_factor("gpt_3m", "osc_25m", 1, 8);
 	hws[IMX8MQ_CLK_DRAM_ALT_ROOT] = imx_clk_hw_fixed_factor("dram_alt_root", "dram_alt", 1, 4);
 
-	hws[IMX8MQ_CLK_ARM] = imx_clk_hw_cpu("arm", "arm_a53_div",
-					   hws[IMX8MQ_CLK_A53_DIV]->clk,
-					   hws[IMX8MQ_CLK_A53_SRC]->clk,
+	hws[IMX8MQ_CLK_ARM] = imx_clk_hw_cpu("arm", "arm_a53_core",
+					   hws[IMX8MQ_CLK_A53_CORE]->clk,
+					   hws[IMX8MQ_CLK_A53_CORE]->clk,
 					   hws[IMX8MQ_ARM_PLL_OUT]->clk,
-					   hws[IMX8MQ_SYS1_PLL_800M]->clk);
+					   hws[IMX8MQ_CLK_A53_DIV]->clk);
+
+	clk_hw_set_parent(hws[IMX8MQ_CLK_A53_SRC], hws[IMX8MQ_SYS1_PLL_800M]);
+	clk_hw_set_parent(hws[IMX8MQ_CLK_A53_CORE], hws[IMX8MQ_ARM_PLL_OUT]);
 
 	imx_check_clk_hws(hws, IMX8MQ_CLK_END);
 
diff --git a/drivers/clk/imx/clk-pfdv2.c b/drivers/clk/imx/clk-pfdv2.c
index de93ce7..78e1f76 100644
--- a/drivers/clk/imx/clk-pfdv2.c
+++ b/drivers/clk/imx/clk-pfdv2.c
@@ -98,26 +98,45 @@ static unsigned long clk_pfdv2_recalc_rate(struct clk_hw *hw,
 	return tmp;
 }
 
-static long clk_pfdv2_round_rate(struct clk_hw *hw, unsigned long rate,
-				 unsigned long *prate)
+static int clk_pfdv2_determine_rate(struct clk_hw *hw,
+				    struct clk_rate_request *req)
 {
-	u64 tmp = *prate;
+	unsigned long parent_rates[] = {
+					480000000,
+					528000000,
+					req->best_parent_rate
+				       };
+	unsigned long best_rate = -1UL, rate = req->rate;
+	unsigned long best_parent_rate = req->best_parent_rate;
+	u64 tmp;
 	u8 frac;
+	int i;
 
-	tmp = tmp * 18 + rate / 2;
-	do_div(tmp, rate);
-	frac = tmp;
+	for (i = 0; i < ARRAY_SIZE(parent_rates); i++) {
+		tmp = parent_rates[i];
+		tmp = tmp * 18 + rate / 2;
+		do_div(tmp, rate);
+		frac = tmp;
 
-	if (frac < 12)
-		frac = 12;
-	else if (frac > 35)
-		frac = 35;
+		if (frac < 12)
+			frac = 12;
+		else if (frac > 35)
+			frac = 35;
 
-	tmp = *prate;
-	tmp *= 18;
-	do_div(tmp, frac);
+		tmp = parent_rates[i];
+		tmp *= 18;
+		do_div(tmp, frac);
 
-	return tmp;
+		if (abs(tmp - req->rate) < abs(best_rate - req->rate)) {
+			best_rate = tmp;
+			best_parent_rate = parent_rates[i];
+		}
+	}
+
+	req->best_parent_rate = best_parent_rate;
+	req->rate = best_rate;
+
+	return 0;
 }
 
 static int clk_pfdv2_is_enabled(struct clk_hw *hw)
@@ -139,6 +158,12 @@ static int clk_pfdv2_set_rate(struct clk_hw *hw, unsigned long rate,
 	u32 val;
 	u8 frac;
 
+	if (!rate)
+		return -EINVAL;
+
+	/* PFD can NOT change rate without gating */
+	WARN_ON(clk_pfdv2_is_enabled(hw));
+
 	tmp = tmp * 18 + rate / 2;
 	do_div(tmp, rate);
 	frac = tmp;
@@ -161,7 +186,7 @@ static const struct clk_ops clk_pfdv2_ops = {
 	.enable		= clk_pfdv2_enable,
 	.disable	= clk_pfdv2_disable,
 	.recalc_rate	= clk_pfdv2_recalc_rate,
-	.round_rate	= clk_pfdv2_round_rate,
+	.determine_rate	= clk_pfdv2_determine_rate,
 	.set_rate	= clk_pfdv2_set_rate,
 	.is_enabled     = clk_pfdv2_is_enabled,
 };
@@ -189,7 +214,7 @@ struct clk_hw *imx_clk_hw_pfdv2(const char *name, const char *parent_name,
 	init.ops = &clk_pfdv2_ops;
 	init.parent_names = &parent_name;
 	init.num_parents = 1;
-	init.flags = CLK_SET_RATE_GATE;
+	init.flags = CLK_SET_RATE_GATE | CLK_SET_RATE_PARENT;
 
 	pfd->hw.init = &init;
 
diff --git a/drivers/clk/imx/clk-pll14xx.c b/drivers/clk/imx/clk-pll14xx.c
index 5b0519a..a83bbbe 100644
--- a/drivers/clk/imx/clk-pll14xx.c
+++ b/drivers/clk/imx/clk-pll14xx.c
@@ -55,8 +55,10 @@ static const struct imx_pll14xx_rate_table imx_pll1416x_tbl[] = {
 };
 
 static const struct imx_pll14xx_rate_table imx_pll1443x_tbl[] = {
+	PLL_1443X_RATE(1039500000U, 173, 2, 1, 16384),
 	PLL_1443X_RATE(650000000U, 325, 3, 2, 0),
 	PLL_1443X_RATE(594000000U, 198, 2, 2, 0),
+	PLL_1443X_RATE(519750000U, 173, 2, 2, 16384),
 	PLL_1443X_RATE(393216000U, 262, 2, 3, 9437),
 	PLL_1443X_RATE(361267200U, 361, 3, 3, 17511),
 };
@@ -408,6 +410,8 @@ struct clk_hw *imx_clk_hw_pll14xx(const char *name, const char *parent_name,
 	default:
 		pr_err("%s: Unknown pll type for pll clk %s\n",
 		       __func__, name);
+		kfree(pll);
+		return ERR_PTR(-EINVAL);
 	};
 
 	pll->base = base;
diff --git a/drivers/clk/imx/clk-pllv4.c b/drivers/clk/imx/clk-pllv4.c
index f51a800..a494504 100644
--- a/drivers/clk/imx/clk-pllv4.c
+++ b/drivers/clk/imx/clk-pllv4.c
@@ -54,7 +54,7 @@ static inline int clk_pllv4_wait_lock(struct clk_pllv4 *pll)
 				  csr, csr & PLL_VLD, 0, LOCK_TIMEOUT_US);
 }
 
-static int clk_pllv4_is_enabled(struct clk_hw *hw)
+static int clk_pllv4_is_prepared(struct clk_hw *hw)
 {
 	struct clk_pllv4 *pll = to_clk_pllv4(hw);
 
@@ -175,7 +175,7 @@ static int clk_pllv4_set_rate(struct clk_hw *hw, unsigned long rate,
 	return 0;
 }
 
-static int clk_pllv4_enable(struct clk_hw *hw)
+static int clk_pllv4_prepare(struct clk_hw *hw)
 {
 	u32 val;
 	struct clk_pllv4 *pll = to_clk_pllv4(hw);
@@ -187,7 +187,7 @@ static int clk_pllv4_enable(struct clk_hw *hw)
 	return clk_pllv4_wait_lock(pll);
 }
 
-static void clk_pllv4_disable(struct clk_hw *hw)
+static void clk_pllv4_unprepare(struct clk_hw *hw)
 {
 	u32 val;
 	struct clk_pllv4 *pll = to_clk_pllv4(hw);
@@ -201,9 +201,9 @@ static const struct clk_ops clk_pllv4_ops = {
 	.recalc_rate	= clk_pllv4_recalc_rate,
 	.round_rate	= clk_pllv4_round_rate,
 	.set_rate	= clk_pllv4_set_rate,
-	.enable		= clk_pllv4_enable,
-	.disable	= clk_pllv4_disable,
-	.is_enabled	= clk_pllv4_is_enabled,
+	.prepare	= clk_pllv4_prepare,
+	.unprepare	= clk_pllv4_unprepare,
+	.is_prepared	= clk_pllv4_is_prepared,
 };
 
 struct clk_hw *imx_clk_hw_pllv4(const char *name, const char *parent_name,
diff --git a/drivers/clk/imx/clk-sscg-pll.c b/drivers/clk/imx/clk-sscg-pll.c
index acd1b90..d4a2be1 100644
--- a/drivers/clk/imx/clk-sscg-pll.c
+++ b/drivers/clk/imx/clk-sscg-pll.c
@@ -195,10 +195,10 @@ static int clk_sscg_pll2_find_setup(struct clk_sscg_pll_setup *setup,
 					uint64_t ref)
 {
 
-	int ret = -EINVAL;
+	int ret;
 
 	if (ref < PLL_STAGE1_MIN_FREQ || ref > PLL_STAGE1_MAX_FREQ)
-		return ret;
+		return -EINVAL;
 
 	temp_setup->vco1 = ref;
 
@@ -254,10 +254,10 @@ static int clk_sscg_pll1_find_setup(struct clk_sscg_pll_setup *setup,
 					uint64_t ref)
 {
 
-	int ret = -EINVAL;
+	int ret;
 
 	if (ref < PLL_REF_MIN_FREQ || ref > PLL_REF_MAX_FREQ)
-		return ret;
+		return -EINVAL;
 
 	temp_setup->ref = ref;
 
@@ -428,7 +428,7 @@ static int __clk_sscg_pll_determine_rate(struct clk_hw *hw,
 	struct clk_sscg_pll_setup *setup = &pll->setup;
 	struct clk_hw *parent_hw = NULL;
 	int bypass_parent_index;
-	int ret = -EINVAL;
+	int ret;
 
 	req->max_rate = max;
 	req->min_rate = min;
@@ -467,10 +467,10 @@ static int clk_sscg_pll_determine_rate(struct clk_hw *hw,
 	uint64_t rate = req->rate;
 	uint64_t min = req->min_rate;
 	uint64_t max = req->max_rate;
-	int ret = -EINVAL;
+	int ret;
 
 	if (rate < PLL_OUT_MIN_FREQ || rate > PLL_OUT_MAX_FREQ)
-		return ret;
+		return -EINVAL;
 
 	ret = __clk_sscg_pll_determine_rate(hw, req, req->rate, req->rate,
 						rate, PLL_BYPASS2);
diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h
index b05213b..f074dd8 100644
--- a/drivers/clk/imx/clk.h
+++ b/drivers/clk/imx/clk.h
@@ -477,20 +477,29 @@ struct clk_hw *imx_clk_hw_cpu(const char *name, const char *parent_name,
 		struct clk *div, struct clk *mux, struct clk *pll,
 		struct clk *step);
 
+#define IMX_COMPOSITE_CORE	BIT(0)
+
 struct clk_hw *imx8m_clk_hw_composite_flags(const char *name,
 					    const char * const *parent_names,
 					    int num_parents,
 					    void __iomem *reg,
+					    u32 composite_flags,
 					    unsigned long flags);
 
+#define imx8m_clk_hw_composite_core(name, parent_names, reg)	\
+	imx8m_clk_hw_composite_flags(name, parent_names, \
+			ARRAY_SIZE(parent_names), reg, \
+			IMX_COMPOSITE_CORE, \
+			CLK_SET_RATE_NO_REPARENT | CLK_OPS_PARENT_ENABLE)
+
 #define imx8m_clk_composite_flags(name, parent_names, num_parents, reg, \
 				  flags) \
 	to_clk(imx8m_clk_hw_composite_flags(name, parent_names, \
-				num_parents, reg, flags))
+				num_parents, reg, 0, flags))
 
 #define __imx8m_clk_hw_composite(name, parent_names, reg, flags) \
 	imx8m_clk_hw_composite_flags(name, parent_names, \
-		ARRAY_SIZE(parent_names), reg, \
+		ARRAY_SIZE(parent_names), reg, 0, \
 		flags | CLK_SET_RATE_NO_REPARENT | CLK_OPS_PARENT_ENABLE)
 
 #define __imx8m_clk_composite(name, parent_names, reg, flags) \
diff --git a/drivers/clk/ingenic/jz4770-cgu.c b/drivers/clk/ingenic/jz4770-cgu.c
index 956dd65..c051ecb 100644
--- a/drivers/clk/ingenic/jz4770-cgu.c
+++ b/drivers/clk/ingenic/jz4770-cgu.c
@@ -432,8 +432,10 @@ static void __init jz4770_cgu_init(struct device_node *np)
 
 	cgu = ingenic_cgu_new(jz4770_cgu_clocks,
 			      ARRAY_SIZE(jz4770_cgu_clocks), np);
-	if (!cgu)
+	if (!cgu) {
 		pr_err("%s: failed to initialise CGU\n", __func__);
+		return;
+	}
 
 	retval = ingenic_cgu_register_clocks(cgu);
 	if (retval)
diff --git a/drivers/clk/ingenic/jz4780-cgu.c b/drivers/clk/ingenic/jz4780-cgu.c
index ea905ff..c758f16 100644
--- a/drivers/clk/ingenic/jz4780-cgu.c
+++ b/drivers/clk/ingenic/jz4780-cgu.c
@@ -9,14 +9,16 @@
 #include <linux/clk-provider.h>
 #include <linux/delay.h>
 #include <linux/io.h>
+#include <linux/iopoll.h>
 #include <linux/of.h>
+
 #include <dt-bindings/clock/jz4780-cgu.h>
 #include "cgu.h"
 #include "pm.h"
 
 /* CGU register offsets */
 #define CGU_REG_CLOCKCONTROL	0x00
-#define CGU_REG_PLLCONTROL	0x0c
+#define CGU_REG_LCR			0x04
 #define CGU_REG_APLL		0x10
 #define CGU_REG_MPLL		0x14
 #define CGU_REG_EPLL		0x18
@@ -46,8 +48,8 @@
 #define CGU_REG_CLOCKSTATUS	0xd4
 
 /* bits within the OPCR register */
-#define OPCR_SPENDN0		(1 << 7)
-#define OPCR_SPENDN1		(1 << 6)
+#define OPCR_SPENDN0		BIT(7)
+#define OPCR_SPENDN1		BIT(6)
 
 /* bits within the USBPCR register */
 #define USBPCR_USB_MODE		BIT(31)
@@ -88,6 +90,13 @@
 #define USBVBFIL_IDDIGFIL_MASK	(0xffff << USBVBFIL_IDDIGFIL_SHIFT)
 #define USBVBFIL_USBVBFIL_MASK	(0xffff)
 
+/* bits within the LCR register */
+#define LCR_PD_SCPU			BIT(31)
+#define LCR_SCPUS			BIT(27)
+
+/* bits within the CLKGR1 register */
+#define CLKGR1_CORE1		BIT(15)
+
 static struct ingenic_cgu *cgu;
 
 static u8 jz4780_otg_phy_get_parent(struct clk_hw *hw)
@@ -205,6 +214,42 @@ static const struct clk_ops jz4780_otg_phy_ops = {
 	.set_rate = jz4780_otg_phy_set_rate,
 };
 
+static int jz4780_core1_enable(struct clk_hw *hw)
+{
+	struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
+	struct ingenic_cgu *cgu = ingenic_clk->cgu;
+	const unsigned int timeout = 5000;
+	unsigned long flags;
+	int retval;
+	u32 lcr, clkgr1;
+
+	spin_lock_irqsave(&cgu->lock, flags);
+
+	lcr = readl(cgu->base + CGU_REG_LCR);
+	lcr &= ~LCR_PD_SCPU;
+	writel(lcr, cgu->base + CGU_REG_LCR);
+
+	clkgr1 = readl(cgu->base + CGU_REG_CLKGR1);
+	clkgr1 &= ~CLKGR1_CORE1;
+	writel(clkgr1, cgu->base + CGU_REG_CLKGR1);
+
+	spin_unlock_irqrestore(&cgu->lock, flags);
+
+	/* wait for the CPU to be powered up */
+	retval = readl_poll_timeout(cgu->base + CGU_REG_LCR, lcr,
+				 !(lcr & LCR_SCPUS), 10, timeout);
+	if (retval == -ETIMEDOUT) {
+		pr_err("%s: Wait for power up core1 timeout\n", __func__);
+		return retval;
+	}
+
+	return 0;
+}
+
+static const struct clk_ops jz4780_core1_ops = {
+	.enable = jz4780_core1_enable,
+};
+
 static const s8 pll_od_encoding[16] = {
 	0x0, 0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7,
 	0x8, 0x9, 0xa, 0xb, 0xc, 0xd, 0xe, 0xf,
@@ -699,9 +744,9 @@ static const struct ingenic_cgu_clk_info jz4780_cgu_clocks[] = {
 	},
 
 	[JZ4780_CLK_CORE1] = {
-		"core1", CGU_CLK_GATE,
+		"core1", CGU_CLK_CUSTOM,
 		.parents = { JZ4780_CLK_CPU, -1, -1, -1 },
-		.gate = { CGU_REG_CLKGR1, 15 },
+		.custom = { &jz4780_core1_ops },
 	},
 
 };
diff --git a/drivers/clk/ingenic/tcu.c b/drivers/clk/ingenic/tcu.c
index ad7daa4..153a954 100644
--- a/drivers/clk/ingenic/tcu.c
+++ b/drivers/clk/ingenic/tcu.c
@@ -189,7 +189,7 @@ static long ingenic_tcu_round_rate(struct clk_hw *hw, unsigned long req_rate,
 	u8 prescale;
 
 	if (req_rate > rate)
-		return -EINVAL;
+		return rate;
 
 	prescale = ingenic_tcu_get_prescale(rate, req_rate);
 
@@ -317,10 +317,17 @@ static const struct ingenic_soc_info jz4770_soc_info = {
 	.has_tcu_clk = false,
 };
 
+static const struct ingenic_soc_info x1000_soc_info = {
+	.num_channels = 8,
+	.has_ost = false, /* X1000 has OST, but it not belong TCU */
+	.has_tcu_clk = false,
+};
+
 static const struct of_device_id ingenic_tcu_of_match[] __initconst = {
 	{ .compatible = "ingenic,jz4740-tcu", .data = &jz4740_soc_info, },
 	{ .compatible = "ingenic,jz4725b-tcu", .data = &jz4725b_soc_info, },
 	{ .compatible = "ingenic,jz4770-tcu", .data = &jz4770_soc_info, },
+	{ .compatible = "ingenic,x1000-tcu", .data = &x1000_soc_info, },
 	{ /* sentinel */ }
 };
 
@@ -471,3 +478,4 @@ static void __init ingenic_tcu_init(struct device_node *np)
 CLK_OF_DECLARE_DRIVER(jz4740_cgu, "ingenic,jz4740-tcu", ingenic_tcu_init);
 CLK_OF_DECLARE_DRIVER(jz4725b_cgu, "ingenic,jz4725b-tcu", ingenic_tcu_init);
 CLK_OF_DECLARE_DRIVER(jz4770_cgu, "ingenic,jz4770-tcu", ingenic_tcu_init);
+CLK_OF_DECLARE_DRIVER(x1000_cgu, "ingenic,x1000-tcu", ingenic_tcu_init);
diff --git a/drivers/clk/keystone/Kconfig b/drivers/clk/keystone/Kconfig
index 38aeefb..ab613f2 100644
--- a/drivers/clk/keystone/Kconfig
+++ b/drivers/clk/keystone/Kconfig
@@ -26,3 +26,11 @@
 	  This is mostly only useful for debugging purposes, and will
 	  increase the boot time of the device. If you want the clocks probed
 	  from firmware, say Y. Otherwise, say N.
+
+config TI_SYSCON_CLK
+	tristate "Syscon based clock driver for K2/K3 SoCs"
+	depends on ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST
+	default ARCH_KEYSTONE || ARCH_K3
+	help
+	  This adds clock driver support for syscon based gate
+	  clocks on TI's K2 and K3 SoCs.
diff --git a/drivers/clk/keystone/Makefile b/drivers/clk/keystone/Makefile
index d044de6f..0e426e6 100644
--- a/drivers/clk/keystone/Makefile
+++ b/drivers/clk/keystone/Makefile
@@ -1,3 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
 obj-$(CONFIG_COMMON_CLK_KEYSTONE)	+= pll.o gate.o
 obj-$(CONFIG_TI_SCI_CLK)		+= sci-clk.o
+obj-$(CONFIG_TI_SYSCON_CLK)		+= syscon-clk.o
diff --git a/drivers/clk/keystone/syscon-clk.c b/drivers/clk/keystone/syscon-clk.c
new file mode 100644
index 0000000..8d7dbea
--- /dev/null
+++ b/drivers/clk/keystone/syscon-clk.c
@@ -0,0 +1,172 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+struct ti_syscon_gate_clk_priv {
+	struct clk_hw hw;
+	struct regmap *regmap;
+	u32 reg;
+	u32 idx;
+};
+
+struct ti_syscon_gate_clk_data {
+	char *name;
+	u32 offset;
+	u32 bit_idx;
+};
+
+static struct
+ti_syscon_gate_clk_priv *to_ti_syscon_gate_clk_priv(struct clk_hw *hw)
+{
+	return container_of(hw, struct ti_syscon_gate_clk_priv, hw);
+}
+
+static int ti_syscon_gate_clk_enable(struct clk_hw *hw)
+{
+	struct ti_syscon_gate_clk_priv *priv = to_ti_syscon_gate_clk_priv(hw);
+
+	return regmap_write_bits(priv->regmap, priv->reg, priv->idx,
+				 priv->idx);
+}
+
+static void ti_syscon_gate_clk_disable(struct clk_hw *hw)
+{
+	struct ti_syscon_gate_clk_priv *priv = to_ti_syscon_gate_clk_priv(hw);
+
+	regmap_write_bits(priv->regmap, priv->reg, priv->idx, 0);
+}
+
+static int ti_syscon_gate_clk_is_enabled(struct clk_hw *hw)
+{
+	unsigned int val;
+	struct ti_syscon_gate_clk_priv *priv = to_ti_syscon_gate_clk_priv(hw);
+
+	regmap_read(priv->regmap, priv->reg, &val);
+
+	return !!(val & priv->idx);
+}
+
+static const struct clk_ops ti_syscon_gate_clk_ops = {
+	.enable		= ti_syscon_gate_clk_enable,
+	.disable	= ti_syscon_gate_clk_disable,
+	.is_enabled	= ti_syscon_gate_clk_is_enabled,
+};
+
+static struct clk_hw
+*ti_syscon_gate_clk_register(struct device *dev, struct regmap *regmap,
+			     const struct ti_syscon_gate_clk_data *data)
+{
+	struct ti_syscon_gate_clk_priv *priv;
+	struct clk_init_data init;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = data->name;
+	init.ops = &ti_syscon_gate_clk_ops;
+	init.parent_names = NULL;
+	init.num_parents = 0;
+	init.flags = 0;
+
+	priv->regmap = regmap;
+	priv->reg = data->offset;
+	priv->idx = BIT(data->bit_idx);
+	priv->hw.init = &init;
+
+	ret = devm_clk_hw_register(dev, &priv->hw);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return &priv->hw;
+}
+
+static int ti_syscon_gate_clk_probe(struct platform_device *pdev)
+{
+	const struct ti_syscon_gate_clk_data *data, *p;
+	struct clk_hw_onecell_data *hw_data;
+	struct device *dev = &pdev->dev;
+	struct regmap *regmap;
+	int num_clks, i;
+
+	data = device_get_match_data(dev);
+	if (!data)
+		return -EINVAL;
+
+	regmap = syscon_node_to_regmap(dev->of_node);
+	if (IS_ERR(regmap)) {
+		if (PTR_ERR(regmap) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+		dev_err(dev, "failed to find parent regmap\n");
+		return PTR_ERR(regmap);
+	}
+
+	num_clks = 0;
+	for (p = data; p->name; p++)
+		num_clks++;
+
+	hw_data = devm_kzalloc(dev, struct_size(hw_data, hws, num_clks),
+			       GFP_KERNEL);
+	if (!hw_data)
+		return -ENOMEM;
+
+	hw_data->num = num_clks;
+
+	for (i = 0; i < num_clks; i++) {
+		hw_data->hws[i] = ti_syscon_gate_clk_register(dev, regmap,
+							      &data[i]);
+		if (IS_ERR(hw_data->hws[i]))
+			dev_warn(dev, "failed to register %s\n",
+				 data[i].name);
+	}
+
+	return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
+					   hw_data);
+}
+
+#define TI_SYSCON_CLK_GATE(_name, _offset, _bit_idx)	\
+	{						\
+		.name = _name,				\
+		.offset = (_offset),			\
+		.bit_idx = (_bit_idx),			\
+	}
+
+static const struct ti_syscon_gate_clk_data am654_clk_data[] = {
+	TI_SYSCON_CLK_GATE("ehrpwm_tbclk0", 0x0, 0),
+	TI_SYSCON_CLK_GATE("ehrpwm_tbclk1", 0x4, 0),
+	TI_SYSCON_CLK_GATE("ehrpwm_tbclk2", 0x8, 0),
+	TI_SYSCON_CLK_GATE("ehrpwm_tbclk3", 0xc, 0),
+	TI_SYSCON_CLK_GATE("ehrpwm_tbclk4", 0x10, 0),
+	TI_SYSCON_CLK_GATE("ehrpwm_tbclk5", 0x14, 0),
+	{ /* Sentinel */ },
+};
+
+static const struct of_device_id ti_syscon_gate_clk_ids[] = {
+	{
+		.compatible = "ti,am654-ehrpwm-tbclk",
+		.data = &am654_clk_data,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ti_syscon_gate_clk_ids);
+
+static struct platform_driver ti_syscon_gate_clk_driver = {
+	.probe = ti_syscon_gate_clk_probe,
+	.driver = {
+		.name = "ti-syscon-gate-clk",
+		.of_match_table = ti_syscon_gate_clk_ids,
+	},
+};
+module_platform_driver(ti_syscon_gate_clk_driver);
+
+MODULE_AUTHOR("Vignesh Raghavendra <vigneshr@ti.com>");
+MODULE_DESCRIPTION("Syscon backed gate-clock driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
index d2760a0..fad616c 100644
--- a/drivers/clk/meson/g12a.c
+++ b/drivers/clk/meson/g12a.c
@@ -3862,6 +3862,111 @@ static struct clk_regmap g12a_ts = {
 	},
 };
 
+/* SPICC SCLK source clock */
+
+static const struct clk_parent_data spicc_sclk_parent_data[] = {
+	{ .fw_name = "xtal", },
+	{ .hw = &g12a_clk81.hw },
+	{ .hw = &g12a_fclk_div4.hw },
+	{ .hw = &g12a_fclk_div3.hw },
+	{ .hw = &g12a_fclk_div5.hw },
+	{ .hw = &g12a_fclk_div7.hw },
+};
+
+static struct clk_regmap g12a_spicc0_sclk_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = HHI_SPICC_CLK_CNTL,
+		.mask = 7,
+		.shift = 7,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spicc0_sclk_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = spicc_sclk_parent_data,
+		.num_parents = ARRAY_SIZE(spicc_sclk_parent_data),
+	},
+};
+
+static struct clk_regmap g12a_spicc0_sclk_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = HHI_SPICC_CLK_CNTL,
+		.shift = 0,
+		.width = 6,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spicc0_sclk_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&g12a_spicc0_sclk_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_spicc0_sclk = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_SPICC_CLK_CNTL,
+		.bit_idx = 6,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spicc0_sclk",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&g12a_spicc0_sclk_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_spicc1_sclk_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = HHI_SPICC_CLK_CNTL,
+		.mask = 7,
+		.shift = 23,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spicc1_sclk_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = spicc_sclk_parent_data,
+		.num_parents = ARRAY_SIZE(spicc_sclk_parent_data),
+	},
+};
+
+static struct clk_regmap g12a_spicc1_sclk_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = HHI_SPICC_CLK_CNTL,
+		.shift = 16,
+		.width = 6,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spicc1_sclk_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&g12a_spicc1_sclk_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_spicc1_sclk = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_SPICC_CLK_CNTL,
+		.bit_idx = 22,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spicc1_sclk",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&g12a_spicc1_sclk_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
 #define MESON_GATE(_name, _reg, _bit) \
 	MESON_PCLK(_name, _reg, _bit, &g12a_clk81.hw)
 
@@ -4159,6 +4264,12 @@ static struct clk_hw_onecell_data g12a_hw_onecell_data = {
 		[CLKID_VDEC_HEVCF]		= &g12a_vdec_hevcf.hw,
 		[CLKID_TS_DIV]			= &g12a_ts_div.hw,
 		[CLKID_TS]			= &g12a_ts.hw,
+		[CLKID_SPICC0_SCLK_SEL]		= &g12a_spicc0_sclk_sel.hw,
+		[CLKID_SPICC0_SCLK_DIV]		= &g12a_spicc0_sclk_div.hw,
+		[CLKID_SPICC0_SCLK]		= &g12a_spicc0_sclk.hw,
+		[CLKID_SPICC1_SCLK_SEL]		= &g12a_spicc1_sclk_sel.hw,
+		[CLKID_SPICC1_SCLK_DIV]		= &g12a_spicc1_sclk_div.hw,
+		[CLKID_SPICC1_SCLK]		= &g12a_spicc1_sclk.hw,
 		[NR_CLKS]			= NULL,
 	},
 	.num = NR_CLKS,
@@ -4408,6 +4519,12 @@ static struct clk_hw_onecell_data g12b_hw_onecell_data = {
 		[CLKID_CPUB_CLK_AXI]		= &g12b_cpub_clk_axi.hw,
 		[CLKID_CPUB_CLK_TRACE_SEL]	= &g12b_cpub_clk_trace_sel.hw,
 		[CLKID_CPUB_CLK_TRACE]		= &g12b_cpub_clk_trace.hw,
+		[CLKID_SPICC0_SCLK_SEL]		= &g12a_spicc0_sclk_sel.hw,
+		[CLKID_SPICC0_SCLK_DIV]		= &g12a_spicc0_sclk_div.hw,
+		[CLKID_SPICC0_SCLK]		= &g12a_spicc0_sclk.hw,
+		[CLKID_SPICC1_SCLK_SEL]		= &g12a_spicc1_sclk_sel.hw,
+		[CLKID_SPICC1_SCLK_DIV]		= &g12a_spicc1_sclk_div.hw,
+		[CLKID_SPICC1_SCLK]		= &g12a_spicc1_sclk.hw,
 		[NR_CLKS]			= NULL,
 	},
 	.num = NR_CLKS,
@@ -4642,6 +4759,12 @@ static struct clk_hw_onecell_data sm1_hw_onecell_data = {
 		[CLKID_CPU1_CLK]		= &sm1_cpu1_clk.hw,
 		[CLKID_CPU2_CLK]		= &sm1_cpu2_clk.hw,
 		[CLKID_CPU3_CLK]		= &sm1_cpu3_clk.hw,
+		[CLKID_SPICC0_SCLK_SEL]		= &g12a_spicc0_sclk_sel.hw,
+		[CLKID_SPICC0_SCLK_DIV]		= &g12a_spicc0_sclk_div.hw,
+		[CLKID_SPICC0_SCLK]		= &g12a_spicc0_sclk.hw,
+		[CLKID_SPICC1_SCLK_SEL]		= &g12a_spicc1_sclk_sel.hw,
+		[CLKID_SPICC1_SCLK_DIV]		= &g12a_spicc1_sclk_div.hw,
+		[CLKID_SPICC1_SCLK]		= &g12a_spicc1_sclk.hw,
 		[NR_CLKS]			= NULL,
 	},
 	.num = NR_CLKS,
@@ -4877,6 +5000,12 @@ static struct clk_regmap *const g12a_clk_regmaps[] = {
 	&sm1_cpu1_clk,
 	&sm1_cpu2_clk,
 	&sm1_cpu3_clk,
+	&g12a_spicc0_sclk_sel,
+	&g12a_spicc0_sclk_div,
+	&g12a_spicc0_sclk,
+	&g12a_spicc1_sclk_sel,
+	&g12a_spicc1_sclk_div,
+	&g12a_spicc1_sclk,
 };
 
 static const struct reg_sequence g12a_init_regs[] = {
diff --git a/drivers/clk/meson/g12a.h b/drivers/clk/meson/g12a.h
index 9df4068..a885255 100644
--- a/drivers/clk/meson/g12a.h
+++ b/drivers/clk/meson/g12a.h
@@ -255,8 +255,12 @@
 #define CLKID_DSU_CLK_DYN1			249
 #define CLKID_DSU_CLK_DYN			250
 #define CLKID_DSU_CLK_FINAL			251
+#define CLKID_SPICC0_SCLK_SEL			256
+#define CLKID_SPICC0_SCLK_DIV			257
+#define CLKID_SPICC1_SCLK_SEL			259
+#define CLKID_SPICC1_SCLK_DIV			260
 
-#define NR_CLKS					256
+#define NR_CLKS					262
 
 /* include the CLKIDs that have been made part of the DT binding */
 #include <dt-bindings/clock/g12a-clkc.h>
diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c
index 1f9c056..5fd6a57 100644
--- a/drivers/clk/meson/gxbb.c
+++ b/drivers/clk/meson/gxbb.c
@@ -2613,19 +2613,12 @@ static MESON_GATE(gxbb_assist_misc, HHI_GCLK_MPEG0, 23);
 static MESON_GATE(gxbb_emmc_a, HHI_GCLK_MPEG0, 24);
 static MESON_GATE(gxbb_emmc_b, HHI_GCLK_MPEG0, 25);
 static MESON_GATE(gxbb_emmc_c, HHI_GCLK_MPEG0, 26);
+static MESON_GATE(gxl_acodec, HHI_GCLK_MPEG0, 28);
 static MESON_GATE(gxbb_spi, HHI_GCLK_MPEG0, 30);
 
 static MESON_GATE(gxbb_i2s_spdif, HHI_GCLK_MPEG1, 2);
 static MESON_GATE(gxbb_eth, HHI_GCLK_MPEG1, 3);
 static MESON_GATE(gxbb_demux, HHI_GCLK_MPEG1, 4);
-static MESON_GATE(gxbb_aiu_glue, HHI_GCLK_MPEG1, 6);
-static MESON_GATE(gxbb_iec958, HHI_GCLK_MPEG1, 7);
-static MESON_GATE(gxbb_i2s_out, HHI_GCLK_MPEG1, 8);
-static MESON_GATE(gxbb_amclk, HHI_GCLK_MPEG1, 9);
-static MESON_GATE(gxbb_aififo2, HHI_GCLK_MPEG1, 10);
-static MESON_GATE(gxbb_mixer, HHI_GCLK_MPEG1, 11);
-static MESON_GATE(gxbb_mixer_iface, HHI_GCLK_MPEG1, 12);
-static MESON_GATE(gxbb_adc, HHI_GCLK_MPEG1, 13);
 static MESON_GATE(gxbb_blkmv, HHI_GCLK_MPEG1, 14);
 static MESON_GATE(gxbb_aiu, HHI_GCLK_MPEG1, 15);
 static MESON_GATE(gxbb_uart1, HHI_GCLK_MPEG1, 16);
@@ -2680,6 +2673,16 @@ static MESON_GATE(gxbb_ao_ahb_bus, HHI_GCLK_AO, 2);
 static MESON_GATE(gxbb_ao_iface, HHI_GCLK_AO, 3);
 static MESON_GATE(gxbb_ao_i2c, HHI_GCLK_AO, 4);
 
+/* AIU gates */
+static MESON_PCLK(gxbb_aiu_glue, HHI_GCLK_MPEG1, 6, &gxbb_aiu.hw);
+static MESON_PCLK(gxbb_iec958, HHI_GCLK_MPEG1, 7, &gxbb_aiu_glue.hw);
+static MESON_PCLK(gxbb_i2s_out, HHI_GCLK_MPEG1, 8, &gxbb_aiu_glue.hw);
+static MESON_PCLK(gxbb_amclk, HHI_GCLK_MPEG1, 9, &gxbb_aiu_glue.hw);
+static MESON_PCLK(gxbb_aififo2, HHI_GCLK_MPEG1, 10, &gxbb_aiu_glue.hw);
+static MESON_PCLK(gxbb_mixer, HHI_GCLK_MPEG1, 11, &gxbb_aiu_glue.hw);
+static MESON_PCLK(gxbb_mixer_iface, HHI_GCLK_MPEG1, 12, &gxbb_aiu_glue.hw);
+static MESON_PCLK(gxbb_adc, HHI_GCLK_MPEG1, 13, &gxbb_aiu_glue.hw);
+
 /* Array of all clocks provided by this provider */
 
 static struct clk_hw_onecell_data gxbb_hw_onecell_data = {
@@ -3100,6 +3103,7 @@ static struct clk_hw_onecell_data gxl_hw_onecell_data = {
 		[CLKID_HDMI_SEL]	    = &gxbb_hdmi_sel.hw,
 		[CLKID_HDMI_DIV]	    = &gxbb_hdmi_div.hw,
 		[CLKID_HDMI]		    = &gxbb_hdmi.hw,
+		[CLKID_ACODEC]		    = &gxl_acodec.hw,
 		[NR_CLKS]		    = NULL,
 	},
 	.num = NR_CLKS,
@@ -3491,6 +3495,7 @@ static struct clk_regmap *const gxl_clk_regmaps[] = {
 	&gxl_hdmi_pll_od,
 	&gxl_hdmi_pll_od2,
 	&gxl_hdmi_pll_dco,
+	&gxl_acodec,
 };
 
 static const struct meson_eeclkc_data gxbb_clkc_data = {
diff --git a/drivers/clk/meson/gxbb.h b/drivers/clk/meson/gxbb.h
index b53584f..1ee8cb7 100644
--- a/drivers/clk/meson/gxbb.h
+++ b/drivers/clk/meson/gxbb.h
@@ -188,7 +188,7 @@
 #define CLKID_HDMI_SEL		  203
 #define CLKID_HDMI_DIV		  204
 
-#define NR_CLKS			  206
+#define NR_CLKS			  207
 
 /* include the CLKIDs that have been made part of the DT binding */
 #include <dt-bindings/clock/gxbb-clkc.h>
diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index 9fd31f2..34a70c4 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -2605,14 +2605,6 @@ static MESON_GATE(meson8b_spi, HHI_GCLK_MPEG0, 30);
 static MESON_GATE(meson8b_i2s_spdif, HHI_GCLK_MPEG1, 2);
 static MESON_GATE(meson8b_eth, HHI_GCLK_MPEG1, 3);
 static MESON_GATE(meson8b_demux, HHI_GCLK_MPEG1, 4);
-static MESON_GATE(meson8b_aiu_glue, HHI_GCLK_MPEG1, 6);
-static MESON_GATE(meson8b_iec958, HHI_GCLK_MPEG1, 7);
-static MESON_GATE(meson8b_i2s_out, HHI_GCLK_MPEG1, 8);
-static MESON_GATE(meson8b_amclk, HHI_GCLK_MPEG1, 9);
-static MESON_GATE(meson8b_aififo2, HHI_GCLK_MPEG1, 10);
-static MESON_GATE(meson8b_mixer, HHI_GCLK_MPEG1, 11);
-static MESON_GATE(meson8b_mixer_iface, HHI_GCLK_MPEG1, 12);
-static MESON_GATE(meson8b_adc, HHI_GCLK_MPEG1, 13);
 static MESON_GATE(meson8b_blkmv, HHI_GCLK_MPEG1, 14);
 static MESON_GATE(meson8b_aiu, HHI_GCLK_MPEG1, 15);
 static MESON_GATE(meson8b_uart1, HHI_GCLK_MPEG1, 16);
@@ -2659,6 +2651,19 @@ static MESON_GATE(meson8b_vclk2_vencl, HHI_GCLK_OTHER, 25);
 static MESON_GATE(meson8b_vclk2_other, HHI_GCLK_OTHER, 26);
 static MESON_GATE(meson8b_edp, HHI_GCLK_OTHER, 31);
 
+/* AIU gates */
+#define MESON_AIU_GLUE_GATE(_name, _reg, _bit) \
+	MESON_PCLK(_name, _reg, _bit, &meson8b_aiu_glue.hw)
+
+static MESON_PCLK(meson8b_aiu_glue, HHI_GCLK_MPEG1, 6, &meson8b_aiu.hw);
+static MESON_AIU_GLUE_GATE(meson8b_iec958, HHI_GCLK_MPEG1, 7);
+static MESON_AIU_GLUE_GATE(meson8b_i2s_out, HHI_GCLK_MPEG1, 8);
+static MESON_AIU_GLUE_GATE(meson8b_amclk, HHI_GCLK_MPEG1, 9);
+static MESON_AIU_GLUE_GATE(meson8b_aififo2, HHI_GCLK_MPEG1, 10);
+static MESON_AIU_GLUE_GATE(meson8b_mixer, HHI_GCLK_MPEG1, 11);
+static MESON_AIU_GLUE_GATE(meson8b_mixer_iface, HHI_GCLK_MPEG1, 12);
+static MESON_AIU_GLUE_GATE(meson8b_adc, HHI_GCLK_MPEG1, 13);
+
 /* Always On (AO) domain gates */
 
 static MESON_GATE(meson8b_ao_media_cpu, HHI_GCLK_AO, 0);
diff --git a/drivers/clk/mmp/Makefile b/drivers/clk/mmp/Makefile
index acc141a..14dc8a8 100644
--- a/drivers/clk/mmp/Makefile
+++ b/drivers/clk/mmp/Makefile
@@ -8,7 +8,7 @@
 obj-$(CONFIG_RESET_CONTROLLER) += reset.o
 
 obj-$(CONFIG_MACH_MMP_DT) += clk-of-pxa168.o clk-of-pxa910.o
-obj-$(CONFIG_COMMON_CLK_MMP2) += clk-of-mmp2.o
+obj-$(CONFIG_COMMON_CLK_MMP2) += clk-of-mmp2.o clk-pll.o
 
 obj-$(CONFIG_CPU_PXA168) += clk-pxa168.o
 obj-$(CONFIG_CPU_PXA910) += clk-pxa910.o
diff --git a/drivers/clk/mmp/clk-mix.c b/drivers/clk/mmp/clk-mix.c
index d2cd36c..7a351ec 100644
--- a/drivers/clk/mmp/clk-mix.c
+++ b/drivers/clk/mmp/clk-mix.c
@@ -441,7 +441,7 @@ const struct clk_ops mmp_clk_mix_ops = {
 
 struct clk *mmp_clk_register_mix(struct device *dev,
 					const char *name,
-					const char **parent_names,
+					const char * const *parent_names,
 					u8 num_parents,
 					unsigned long flags,
 					struct mmp_clk_mix_config *config,
diff --git a/drivers/clk/mmp/clk-of-mmp2.c b/drivers/clk/mmp/clk-of-mmp2.c
index 6e71591..52dc8b4 100644
--- a/drivers/clk/mmp/clk-of-mmp2.c
+++ b/drivers/clk/mmp/clk-of-mmp2.c
@@ -3,6 +3,7 @@
  *
  * Copyright (C) 2012 Marvell
  * Chao Xie <xiechao.mail@gmail.com>
+ * Copyright (C) 2020 Lubomir Rintel <lkundrak@v3.sk>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
@@ -48,17 +49,39 @@
 #define APMU_SDH1	0x58
 #define APMU_SDH2	0xe8
 #define APMU_SDH3	0xec
+#define APMU_SDH4	0x15c
 #define APMU_USB	0x5c
 #define APMU_DISP0	0x4c
 #define APMU_DISP1	0x110
 #define APMU_CCIC0	0x50
 #define APMU_CCIC1	0xf4
+#define APBC_THERMAL0	0x90
+#define APBC_THERMAL1	0x98
+#define APBC_THERMAL2	0x9c
+#define APBC_THERMAL3	0xa0
 #define APMU_USBHSIC0	0xf8
 #define APMU_USBHSIC1	0xfc
-#define MPMU_UART_PLL	0x14
+#define APMU_GPU	0xcc
+
+#define MPMU_FCCR		0x8
+#define MPMU_POSR		0x10
+#define MPMU_UART_PLL		0x14
+#define MPMU_PLL2_CR		0x34
+/* MMP3 specific below */
+#define MPMU_PLL3_CR		0x50
+#define MPMU_PLL3_CTRL1		0x58
+#define MPMU_PLL1_CTRL		0x5c
+#define MPMU_PLL_DIFF_CTRL	0x68
+#define MPMU_PLL2_CTRL1		0x414
+
+enum mmp2_clk_model {
+	CLK_MODEL_MMP2,
+	CLK_MODEL_MMP3,
+};
 
 struct mmp2_clk_unit {
 	struct mmp_clk_unit unit;
+	enum mmp2_clk_model model;
 	void __iomem *mpmu_base;
 	void __iomem *apmu_base;
 	void __iomem *apbc_base;
@@ -67,11 +90,22 @@ struct mmp2_clk_unit {
 static struct mmp_param_fixed_rate_clk fixed_rate_clks[] = {
 	{MMP2_CLK_CLK32, "clk32", NULL, 0, 32768},
 	{MMP2_CLK_VCTCXO, "vctcxo", NULL, 0, 26000000},
-	{MMP2_CLK_PLL1, "pll1", NULL, 0, 800000000},
-	{MMP2_CLK_PLL2, "pll2", NULL, 0, 960000000},
 	{MMP2_CLK_USB_PLL, "usb_pll", NULL, 0, 480000000},
 };
 
+static struct mmp_param_pll_clk pll_clks[] = {
+	{MMP2_CLK_PLL1,   "pll1",   797330000, MPMU_FCCR,          0x4000, MPMU_POSR,     0},
+	{MMP2_CLK_PLL2,   "pll2",           0, MPMU_PLL2_CR,       0x0300, MPMU_PLL2_CR, 10},
+};
+
+static struct mmp_param_pll_clk mmp3_pll_clks[] = {
+	{MMP2_CLK_PLL2,   "pll1",   797330000, MPMU_FCCR,          0x4000, MPMU_POSR,     0,      26000000, MPMU_PLL1_CTRL,      25},
+	{MMP2_CLK_PLL2,   "pll2",           0, MPMU_PLL2_CR,       0x0300, MPMU_PLL2_CR, 10,      26000000, MPMU_PLL2_CTRL1,     25},
+	{MMP3_CLK_PLL1_P, "pll1_p",         0, MPMU_PLL_DIFF_CTRL, 0x0010, 0,             0,     797330000, MPMU_PLL_DIFF_CTRL,   0},
+	{MMP3_CLK_PLL2_P, "pll2_p",         0, MPMU_PLL_DIFF_CTRL, 0x0100, MPMU_PLL2_CR, 10,      26000000, MPMU_PLL_DIFF_CTRL,   5},
+	{MMP3_CLK_PLL3,   "pll3",           0, MPMU_PLL3_CR,       0x0300, MPMU_PLL3_CR, 10,      26000000, MPMU_PLL3_CTRL1,     25},
+};
+
 static struct mmp_param_fixed_factor_clk fixed_factor_clks[] = {
 	{MMP2_CLK_PLL1_2, "pll1_2", "pll1", 1, 2, 0},
 	{MMP2_CLK_PLL1_4, "pll1_4", "pll1_2", 1, 2, 0},
@@ -113,6 +147,16 @@ static void mmp2_pll_init(struct mmp2_clk_unit *pxa_unit)
 	mmp_register_fixed_rate_clks(unit, fixed_rate_clks,
 					ARRAY_SIZE(fixed_rate_clks));
 
+	if (pxa_unit->model == CLK_MODEL_MMP3) {
+		mmp_register_pll_clks(unit, mmp3_pll_clks,
+					pxa_unit->mpmu_base,
+					ARRAY_SIZE(mmp3_pll_clks));
+	} else {
+		mmp_register_pll_clks(unit, pll_clks,
+					pxa_unit->mpmu_base,
+					ARRAY_SIZE(pll_clks));
+	}
+
 	mmp_register_fixed_factor_clks(unit, fixed_factor_clks,
 					ARRAY_SIZE(fixed_factor_clks));
 
@@ -127,16 +171,16 @@ static void mmp2_pll_init(struct mmp2_clk_unit *pxa_unit)
 static DEFINE_SPINLOCK(uart0_lock);
 static DEFINE_SPINLOCK(uart1_lock);
 static DEFINE_SPINLOCK(uart2_lock);
-static const char *uart_parent_names[] = {"uart_pll", "vctcxo"};
+static const char * const uart_parent_names[] = {"uart_pll", "vctcxo"};
 
 static DEFINE_SPINLOCK(ssp0_lock);
 static DEFINE_SPINLOCK(ssp1_lock);
 static DEFINE_SPINLOCK(ssp2_lock);
 static DEFINE_SPINLOCK(ssp3_lock);
-static const char *ssp_parent_names[] = {"vctcxo_4", "vctcxo_2", "vctcxo", "pll1_16"};
+static const char * const ssp_parent_names[] = {"vctcxo_4", "vctcxo_2", "vctcxo", "pll1_16"};
 
 static DEFINE_SPINLOCK(timer_lock);
-static const char *timer_parent_names[] = {"clk32", "vctcxo_4", "vctcxo_2", "vctcxo"};
+static const char * const timer_parent_names[] = {"clk32", "vctcxo_4", "vctcxo_2", "vctcxo"};
 
 static DEFINE_SPINLOCK(reset_lock);
 
@@ -176,6 +220,13 @@ static struct mmp_param_gate_clk apbc_gate_clks[] = {
 	{MMP2_CLK_SSP2, "ssp2_clk", "ssp2_mux", CLK_SET_RATE_PARENT, APBC_SSP2, 0x7, 0x3, 0x0, 0, &ssp2_lock},
 	{MMP2_CLK_SSP3, "ssp3_clk", "ssp3_mux", CLK_SET_RATE_PARENT, APBC_SSP3, 0x7, 0x3, 0x0, 0, &ssp3_lock},
 	{MMP2_CLK_TIMER, "timer_clk", "timer_mux", CLK_SET_RATE_PARENT, APBC_TIMER, 0x7, 0x3, 0x0, 0, &timer_lock},
+	{MMP2_CLK_THERMAL0, "thermal0_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_THERMAL0, 0x7, 0x3, 0x0, MMP_CLK_GATE_NEED_DELAY, &reset_lock},
+};
+
+static struct mmp_param_gate_clk mmp3_apbc_gate_clks[] = {
+	{MMP3_CLK_THERMAL1, "thermal1_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_THERMAL1, 0x7, 0x3, 0x0, MMP_CLK_GATE_NEED_DELAY, &reset_lock},
+	{MMP3_CLK_THERMAL2, "thermal2_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_THERMAL2, 0x7, 0x3, 0x0, MMP_CLK_GATE_NEED_DELAY, &reset_lock},
+	{MMP3_CLK_THERMAL3, "thermal3_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_THERMAL3, 0x7, 0x3, 0x0, MMP_CLK_GATE_NEED_DELAY, &reset_lock},
 };
 
 static void mmp2_apb_periph_clk_init(struct mmp2_clk_unit *pxa_unit)
@@ -187,10 +238,15 @@ static void mmp2_apb_periph_clk_init(struct mmp2_clk_unit *pxa_unit)
 
 	mmp_register_gate_clks(unit, apbc_gate_clks, pxa_unit->apbc_base,
 				ARRAY_SIZE(apbc_gate_clks));
+
+	if (pxa_unit->model == CLK_MODEL_MMP3) {
+		mmp_register_gate_clks(unit, mmp3_apbc_gate_clks, pxa_unit->apbc_base,
+					ARRAY_SIZE(mmp3_apbc_gate_clks));
+	}
 }
 
 static DEFINE_SPINLOCK(sdh_lock);
-static const char *sdh_parent_names[] = {"pll1_4", "pll2", "usb_pll", "pll1"};
+static const char * const sdh_parent_names[] = {"pll1_4", "pll2", "usb_pll", "pll1"};
 static struct mmp_clk_mix_config sdh_mix_config = {
 	.reg_info = DEFINE_MIX_REG_INFO(4, 10, 2, 8, 32),
 };
@@ -201,11 +257,20 @@ static DEFINE_SPINLOCK(usbhsic1_lock);
 
 static DEFINE_SPINLOCK(disp0_lock);
 static DEFINE_SPINLOCK(disp1_lock);
-static const char *disp_parent_names[] = {"pll1", "pll1_16", "pll2", "vctcxo"};
+static const char * const disp_parent_names[] = {"pll1", "pll1_16", "pll2", "vctcxo"};
 
 static DEFINE_SPINLOCK(ccic0_lock);
 static DEFINE_SPINLOCK(ccic1_lock);
-static const char *ccic_parent_names[] = {"pll1_2", "pll1_16", "vctcxo"};
+static const char * const ccic_parent_names[] = {"pll1_2", "pll1_16", "vctcxo"};
+
+static DEFINE_SPINLOCK(gpu_lock);
+static const char * const mmp2_gpu_gc_parent_names[] =  {"pll1_2", "pll1_3", "pll2_2", "pll2_3", "pll2", "usb_pll"};
+static u32 mmp2_gpu_gc_parent_table[] =          { 0x0000,   0x0040,   0x0080,   0x00c0,   0x1000, 0x1040   };
+static const char * const mmp2_gpu_bus_parent_names[] = {"pll1_4", "pll2",   "pll2_2", "usb_pll"};
+static u32 mmp2_gpu_bus_parent_table[] =         { 0x0000,   0x0020,   0x0030,   0x4020   };
+static const char * const mmp3_gpu_bus_parent_names[] = {"pll1_4", "pll1_6", "pll1_2", "pll2_2"};
+static const char * const mmp3_gpu_gc_parent_names[] =  {"pll1",   "pll2",   "pll1_p", "pll2_p"};
+
 static struct mmp_clk_mix_config ccic0_mix_config = {
 	.reg_info = DEFINE_MIX_REG_INFO(4, 17, 2, 6, 32),
 };
@@ -218,6 +283,15 @@ static struct mmp_param_mux_clk apmu_mux_clks[] = {
 	{MMP2_CLK_DISP1_MUX, "disp1_mux", disp_parent_names, ARRAY_SIZE(disp_parent_names), CLK_SET_RATE_PARENT, APMU_DISP1, 6, 2, 0, &disp1_lock},
 };
 
+static struct mmp_param_mux_clk mmp3_apmu_mux_clks[] = {
+	{0, "gpu_bus_mux", mmp3_gpu_bus_parent_names, ARRAY_SIZE(mmp3_gpu_bus_parent_names),
+									CLK_SET_RATE_PARENT, APMU_GPU, 4, 2, 0, &gpu_lock},
+	{0, "gpu_3d_mux", mmp3_gpu_gc_parent_names, ARRAY_SIZE(mmp3_gpu_gc_parent_names),
+									CLK_SET_RATE_PARENT, APMU_GPU, 6, 2, 0, &gpu_lock},
+	{0, "gpu_2d_mux", mmp3_gpu_gc_parent_names, ARRAY_SIZE(mmp3_gpu_gc_parent_names),
+									CLK_SET_RATE_PARENT, APMU_GPU, 12, 2, 0, &gpu_lock},
+};
+
 static struct mmp_param_div_clk apmu_div_clks[] = {
 	{0, "disp0_div", "disp0_mux", CLK_SET_RATE_PARENT, APMU_DISP0, 8, 4, 0, &disp0_lock},
 	{0, "disp0_sphy_div", "disp0_mux", CLK_SET_RATE_PARENT, APMU_DISP0, 15, 5, 0, &disp0_lock},
@@ -226,6 +300,11 @@ static struct mmp_param_div_clk apmu_div_clks[] = {
 	{0, "ccic1_sphy_div", "ccic1_mix_clk", CLK_SET_RATE_PARENT, APMU_CCIC1, 10, 5, 0, &ccic1_lock},
 };
 
+static struct mmp_param_div_clk mmp3_apmu_div_clks[] = {
+	{0, "gpu_3d_div", "gpu_3d_mux", CLK_SET_RATE_PARENT, APMU_GPU, 24, 4, 0, &gpu_lock},
+	{0, "gpu_2d_div", "gpu_2d_mux", CLK_SET_RATE_PARENT, APMU_GPU, 28, 4, 0, &gpu_lock},
+};
+
 static struct mmp_param_gate_clk apmu_gate_clks[] = {
 	{MMP2_CLK_USB, "usb_clk", "usb_pll", 0, APMU_USB, 0x9, 0x9, 0x0, 0, &usb_lock},
 	{MMP2_CLK_USBHSIC0, "usbhsic0_clk", "usb_pll", 0, APMU_USBHSIC0, 0x1b, 0x1b, 0x0, 0, &usbhsic0_lock},
@@ -235,8 +314,8 @@ static struct mmp_param_gate_clk apmu_gate_clks[] = {
 	{MMP2_CLK_SDH1, "sdh1_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH1, 0x1b, 0x1b, 0x0, 0, &sdh_lock},
 	{MMP2_CLK_SDH2, "sdh2_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH2, 0x1b, 0x1b, 0x0, 0, &sdh_lock},
 	{MMP2_CLK_SDH3, "sdh3_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH3, 0x1b, 0x1b, 0x0, 0, &sdh_lock},
-	{MMP2_CLK_DISP0, "disp0_clk", "disp0_div", CLK_SET_RATE_PARENT, APMU_DISP0, 0x09, 0x09, 0x0, 0, &disp0_lock},
-	{MMP2_CLK_DISP0_LCDC, "disp0_lcdc_clk", "disp0_mux", CLK_SET_RATE_PARENT, APMU_DISP0, 0x12, 0x12, 0x0, 0, &disp0_lock},
+	{MMP2_CLK_DISP0, "disp0_clk", "disp0_div", CLK_SET_RATE_PARENT, APMU_DISP0, 0x12, 0x12, 0x0, 0, &disp0_lock},
+	{MMP2_CLK_DISP0_LCDC, "disp0_lcdc_clk", "disp0_mux", CLK_SET_RATE_PARENT, APMU_DISP0, 0x09, 0x09, 0x0, 0, &disp0_lock},
 	{MMP2_CLK_DISP0_SPHY, "disp0_sphy_clk", "disp0_sphy_div", CLK_SET_RATE_PARENT, APMU_DISP0, 0x1024, 0x1024, 0x0, 0, &disp0_lock},
 	{MMP2_CLK_DISP1, "disp1_clk", "disp1_div", CLK_SET_RATE_PARENT, APMU_DISP1, 0x09, 0x09, 0x0, 0, &disp1_lock},
 	{MMP2_CLK_CCIC_ARBITER, "ccic_arbiter", "vctcxo", CLK_SET_RATE_PARENT, APMU_CCIC0, 0x1800, 0x1800, 0x0, 0, &ccic0_lock},
@@ -246,6 +325,17 @@ static struct mmp_param_gate_clk apmu_gate_clks[] = {
 	{MMP2_CLK_CCIC1, "ccic1_clk", "ccic1_mix_clk", CLK_SET_RATE_PARENT, APMU_CCIC1, 0x1b, 0x1b, 0x0, 0, &ccic1_lock},
 	{MMP2_CLK_CCIC1_PHY, "ccic1_phy_clk", "ccic1_mix_clk", CLK_SET_RATE_PARENT, APMU_CCIC1, 0x24, 0x24, 0x0, 0, &ccic1_lock},
 	{MMP2_CLK_CCIC1_SPHY, "ccic1_sphy_clk", "ccic1_sphy_div", CLK_SET_RATE_PARENT, APMU_CCIC1, 0x300, 0x300, 0x0, 0, &ccic1_lock},
+	{MMP2_CLK_GPU_BUS, "gpu_bus_clk", "gpu_bus_mux", CLK_SET_RATE_PARENT, APMU_GPU, 0xa, 0xa, 0x0, MMP_CLK_GATE_NEED_DELAY, &gpu_lock},
+};
+
+static struct mmp_param_gate_clk mmp2_apmu_gate_clks[] = {
+	{MMP2_CLK_GPU_3D, "gpu_3d_clk", "gpu_3d_mux", CLK_SET_RATE_PARENT, APMU_GPU, 0x5, 0x5, 0x0, MMP_CLK_GATE_NEED_DELAY, &gpu_lock},
+};
+
+static struct mmp_param_gate_clk mmp3_apmu_gate_clks[] = {
+	{MMP3_CLK_SDH4, "sdh4_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH4, 0x1b, 0x1b, 0x0, 0, &sdh_lock},
+	{MMP3_CLK_GPU_3D, "gpu_3d_clk", "gpu_3d_div", CLK_SET_RATE_PARENT, APMU_GPU, 0x5, 0x5, 0x0, MMP_CLK_GATE_NEED_DELAY, &gpu_lock},
+	{MMP3_CLK_GPU_2D, "gpu_2d_clk", "gpu_2d_div", CLK_SET_RATE_PARENT, APMU_GPU, 0x1c0000, 0x1c0000, 0x0, MMP_CLK_GATE_NEED_DELAY, &gpu_lock},
 };
 
 static void mmp2_axi_periph_clk_init(struct mmp2_clk_unit *pxa_unit)
@@ -281,6 +371,34 @@ static void mmp2_axi_periph_clk_init(struct mmp2_clk_unit *pxa_unit)
 
 	mmp_register_gate_clks(unit, apmu_gate_clks, pxa_unit->apmu_base,
 				ARRAY_SIZE(apmu_gate_clks));
+
+	if (pxa_unit->model == CLK_MODEL_MMP3) {
+		mmp_register_mux_clks(unit, mmp3_apmu_mux_clks, pxa_unit->apmu_base,
+					ARRAY_SIZE(mmp3_apmu_mux_clks));
+
+		mmp_register_div_clks(unit, mmp3_apmu_div_clks, pxa_unit->apmu_base,
+					ARRAY_SIZE(mmp3_apmu_div_clks));
+
+		mmp_register_gate_clks(unit, mmp3_apmu_gate_clks, pxa_unit->apmu_base,
+					ARRAY_SIZE(mmp3_apmu_gate_clks));
+	} else {
+		clk_register_mux_table(NULL, "gpu_3d_mux", mmp2_gpu_gc_parent_names,
+					ARRAY_SIZE(mmp2_gpu_gc_parent_names),
+					CLK_SET_RATE_PARENT,
+					pxa_unit->apmu_base + APMU_GPU,
+					0, 0x10c0, 0,
+					mmp2_gpu_gc_parent_table, &gpu_lock);
+
+		clk_register_mux_table(NULL, "gpu_bus_mux", mmp2_gpu_bus_parent_names,
+					ARRAY_SIZE(mmp2_gpu_bus_parent_names),
+					CLK_SET_RATE_PARENT,
+					pxa_unit->apmu_base + APMU_GPU,
+					0, 0x4030, 0,
+					mmp2_gpu_bus_parent_table, &gpu_lock);
+
+		mmp_register_gate_clks(unit, mmp2_apmu_gate_clks, pxa_unit->apmu_base,
+					ARRAY_SIZE(mmp2_apmu_gate_clks));
+	}
 }
 
 static void mmp2_clk_reset_init(struct device_node *np,
@@ -313,6 +431,11 @@ static void __init mmp2_clk_init(struct device_node *np)
 	if (!pxa_unit)
 		return;
 
+	if (of_device_is_compatible(np, "marvell,mmp3-clock"))
+		pxa_unit->model = CLK_MODEL_MMP3;
+	else
+		pxa_unit->model = CLK_MODEL_MMP2;
+
 	pxa_unit->mpmu_base = of_iomap(np, 0);
 	if (!pxa_unit->mpmu_base) {
 		pr_err("failed to map mpmu registers\n");
@@ -352,3 +475,4 @@ static void __init mmp2_clk_init(struct device_node *np)
 }
 
 CLK_OF_DECLARE(mmp2_clk, "marvell,mmp2-clock", mmp2_clk_init);
+CLK_OF_DECLARE(mmp3_clk, "marvell,mmp3-clock", mmp2_clk_init);
diff --git a/drivers/clk/mmp/clk-pll.c b/drivers/clk/mmp/clk-pll.c
new file mode 100644
index 0000000..962014c
--- /dev/null
+++ b/drivers/clk/mmp/clk-pll.c
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MMP PLL clock rate calculation
+ *
+ * Copyright (C) 2020 Lubomir Rintel <lkundrak@v3.sk>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+
+#include "clk.h"
+
+#define to_clk_mmp_pll(hw)	container_of(hw, struct mmp_clk_pll, hw)
+
+struct mmp_clk_pll {
+	struct clk_hw hw;
+	unsigned long default_rate;
+	void __iomem *enable_reg;
+	u32 enable;
+	void __iomem *reg;
+	u8 shift;
+
+	unsigned long input_rate;
+	void __iomem *postdiv_reg;
+	u8 postdiv_shift;
+};
+
+static int mmp_clk_pll_is_enabled(struct clk_hw *hw)
+{
+	struct mmp_clk_pll *pll = to_clk_mmp_pll(hw);
+	u32 val;
+
+	val = readl_relaxed(pll->enable_reg);
+	if ((val & pll->enable) == pll->enable)
+		return 1;
+
+	/* Some PLLs, if not software controlled, output default clock. */
+	if (pll->default_rate > 0)
+		return 1;
+
+	return 0;
+}
+
+static unsigned long mmp_clk_pll_recalc_rate(struct clk_hw *hw,
+					unsigned long parent_rate)
+{
+	struct mmp_clk_pll *pll = to_clk_mmp_pll(hw);
+	u32 fbdiv, refdiv, postdiv;
+	u64 rate;
+	u32 val;
+
+	val = readl_relaxed(pll->enable_reg);
+	if ((val & pll->enable) != pll->enable)
+		return pll->default_rate;
+
+	if (pll->reg) {
+		val = readl_relaxed(pll->reg);
+		fbdiv = (val >> pll->shift) & 0x1ff;
+		refdiv = (val >> (pll->shift + 9)) & 0x1f;
+	} else {
+		fbdiv = 2;
+		refdiv = 1;
+	}
+
+	if (pll->postdiv_reg) {
+		/* MMP3 clock rate calculation */
+		static const u8 postdivs[] = {2, 3, 4, 5, 6, 8, 10, 12, 16};
+
+		val = readl_relaxed(pll->postdiv_reg);
+		postdiv = (val >> pll->postdiv_shift) & 0x7;
+
+		rate = pll->input_rate;
+		rate *= 2 * fbdiv;
+		do_div(rate, refdiv);
+		do_div(rate, postdivs[postdiv]);
+	} else {
+		/* MMP2 clock rate calculation */
+		if (refdiv == 3) {
+			rate = 19200000;
+		} else if (refdiv == 4) {
+			rate = 26000000;
+		} else {
+			pr_err("bad refdiv: %d (0x%08x)\n", refdiv, val);
+			return 0;
+		}
+
+		rate *= fbdiv + 2;
+		do_div(rate, refdiv + 2);
+	}
+
+	return (unsigned long)rate;
+}
+
+static const struct clk_ops mmp_clk_pll_ops = {
+	.is_enabled = mmp_clk_pll_is_enabled,
+	.recalc_rate = mmp_clk_pll_recalc_rate,
+};
+
+static struct clk *mmp_clk_register_pll(char *name,
+			unsigned long default_rate,
+			void __iomem *enable_reg, u32 enable,
+			void __iomem *reg, u8 shift,
+			unsigned long input_rate,
+			void __iomem *postdiv_reg, u8 postdiv_shift)
+{
+	struct mmp_clk_pll *pll;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+	if (!pll)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &mmp_clk_pll_ops;
+	init.flags = 0;
+	init.parent_names = NULL;
+	init.num_parents = 0;
+
+	pll->default_rate = default_rate;
+	pll->enable_reg = enable_reg;
+	pll->enable = enable;
+	pll->reg = reg;
+	pll->shift = shift;
+
+	pll->input_rate = input_rate;
+	pll->postdiv_reg = postdiv_reg;
+	pll->postdiv_shift = postdiv_shift;
+
+	pll->hw.init = &init;
+
+	clk = clk_register(NULL, &pll->hw);
+
+	if (IS_ERR(clk))
+		kfree(pll);
+
+	return clk;
+}
+
+void mmp_register_pll_clks(struct mmp_clk_unit *unit,
+			struct mmp_param_pll_clk *clks,
+			void __iomem *base, int size)
+{
+	struct clk *clk;
+	int i;
+
+	for (i = 0; i < size; i++) {
+		void __iomem *reg = NULL;
+
+		if (clks[i].offset)
+			reg = base + clks[i].offset;
+
+		clk = mmp_clk_register_pll(clks[i].name,
+					clks[i].default_rate,
+					base + clks[i].enable_offset,
+					clks[i].enable,
+					reg, clks[i].shift,
+					clks[i].input_rate,
+					base + clks[i].postdiv_offset,
+					clks[i].postdiv_shift);
+		if (IS_ERR(clk)) {
+			pr_err("%s: failed to register clock %s\n",
+			       __func__, clks[i].name);
+			continue;
+		}
+		if (clks[i].id)
+			unit->clk_table[clks[i].id] = clk;
+	}
+}
diff --git a/drivers/clk/mmp/clk.h b/drivers/clk/mmp/clk.h
index 70bb732..20dc1e5 100644
--- a/drivers/clk/mmp/clk.h
+++ b/drivers/clk/mmp/clk.h
@@ -97,7 +97,7 @@ struct mmp_clk_mix {
 extern const struct clk_ops mmp_clk_mix_ops;
 extern struct clk *mmp_clk_register_mix(struct device *dev,
 					const char *name,
-					const char **parent_names,
+					const char * const *parent_names,
 					u8 num_parents,
 					unsigned long flags,
 					struct mmp_clk_mix_config *config,
@@ -124,9 +124,6 @@ extern struct clk *mmp_clk_register_gate(struct device *dev, const char *name,
 			u32 val_disable, unsigned int gate_flags,
 			spinlock_t *lock);
 
-
-extern struct clk *mmp_clk_register_pll2(const char *name,
-		const char *parent_name, unsigned long flags);
 extern struct clk *mmp_clk_register_apbc(const char *name,
 		const char *parent_name, void __iomem *base,
 		unsigned int delay, unsigned int apbc_flags, spinlock_t *lock);
@@ -196,7 +193,7 @@ void mmp_register_gate_clks(struct mmp_clk_unit *unit,
 struct mmp_param_mux_clk {
 	unsigned int id;
 	char *name;
-	const char **parent_name;
+	const char * const *parent_name;
 	u8 num_parents;
 	unsigned long flags;
 	unsigned long offset;
@@ -224,6 +221,23 @@ void mmp_register_div_clks(struct mmp_clk_unit *unit,
 			struct mmp_param_div_clk *clks,
 			void __iomem *base, int size);
 
+struct mmp_param_pll_clk {
+	unsigned int id;
+	char *name;
+	unsigned long default_rate;
+	unsigned long enable_offset;
+	u32 enable;
+	unsigned long offset;
+	u8 shift;
+	/* MMP3 specific: */
+	unsigned long input_rate;
+	unsigned long postdiv_offset;
+	unsigned long postdiv_shift;
+};
+void mmp_register_pll_clks(struct mmp_clk_unit *unit,
+			struct mmp_param_pll_clk *clks,
+			void __iomem *base, int size);
+
 #define DEFINE_MIX_REG_INFO(w_d, s_d, w_m, s_m, fc)	\
 {							\
 	.width_div = (w_d),				\
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 15cdcdc..11ec6f4 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -280,6 +280,15 @@
 	  Say Y if you want to support graphics controller devices and
 	  functionality such as 3D graphics.
 
+config SC_MSS_7180
+	tristate "SC7180 Modem Clock Controller"
+	select SC_GCC_7180
+	help
+	  Support for the Modem Subsystem clock controller on Qualcomm
+	  Technologies, Inc on SC7180 devices.
+	  Say Y if you want to use the Modem branch clocks of the Modem
+	  subsystem clock controller to reset the MSS subsystem.
+
 config SC_VIDEOCC_7180
 	tristate "SC7180 Video Clock Controller"
 	select SC_GCC_7180
@@ -366,6 +375,13 @@
 	  Say Y if you want to use peripheral devices such as UART,
 	  SPI, I2C, USB, SD/UFS, PCIe etc.
 
+config SM_GCC_8250
+	tristate "SM8250 Global Clock Controller"
+	help
+	  Support for the global clock controller on SM8250 devices.
+	  Say Y if you want to use peripheral devices such as UART,
+	  SPI, I2C, USB, SD/UFS, PCIe etc.
+
 config SPMI_PMIC_CLKDIV
 	tristate "SPMI PMIC clkdiv Support"
 	depends on SPMI || COMPILE_TEST
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 656a87e..691efbf 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -50,6 +50,7 @@
 obj-$(CONFIG_SC_DISPCC_7180) += dispcc-sc7180.o
 obj-$(CONFIG_SC_GCC_7180) += gcc-sc7180.o
 obj-$(CONFIG_SC_GPUCC_7180) += gpucc-sc7180.o
+obj-$(CONFIG_SC_MSS_7180) += mss-sc7180.o
 obj-$(CONFIG_SC_VIDEOCC_7180) += videocc-sc7180.o
 obj-$(CONFIG_SDM_CAMCC_845) += camcc-sdm845.o
 obj-$(CONFIG_SDM_DISPCC_845) += dispcc-sdm845.o
@@ -59,6 +60,7 @@
 obj-$(CONFIG_SDM_LPASSCC_845) += lpasscc-sdm845.o
 obj-$(CONFIG_SDM_VIDEOCC_845) += videocc-sdm845.o
 obj-$(CONFIG_SM_GCC_8150) += gcc-sm8150.o
+obj-$(CONFIG_SM_GCC_8250) += gcc-sm8250.o
 obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o
 obj-$(CONFIG_KPSS_XCC) += kpss-xcc.o
 obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index 7c2936d..9b2dfa0 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c
@@ -52,6 +52,7 @@
 #define PLL_CONFIG_CTL_U1(p)	((p)->offset + (p)->regs[PLL_OFF_CONFIG_CTL_U1])
 #define PLL_TEST_CTL(p)		((p)->offset + (p)->regs[PLL_OFF_TEST_CTL])
 #define PLL_TEST_CTL_U(p)	((p)->offset + (p)->regs[PLL_OFF_TEST_CTL_U])
+#define PLL_TEST_CTL_U1(p)     ((p)->offset + (p)->regs[PLL_OFF_TEST_CTL_U1])
 #define PLL_STATUS(p)		((p)->offset + (p)->regs[PLL_OFF_STATUS])
 #define PLL_OPMODE(p)		((p)->offset + (p)->regs[PLL_OFF_OPMODE])
 #define PLL_FRAC(p)		((p)->offset + (p)->regs[PLL_OFF_FRAC])
@@ -116,6 +117,22 @@ const u8 clk_alpha_pll_regs[][PLL_OFF_MAX_REGS] = {
 		[PLL_OFF_ALPHA_VAL] = 0x40,
 		[PLL_OFF_CAL_VAL] = 0x44,
 	},
+	[CLK_ALPHA_PLL_TYPE_LUCID] =  {
+		[PLL_OFF_L_VAL] = 0x04,
+		[PLL_OFF_CAL_L_VAL] = 0x08,
+		[PLL_OFF_USER_CTL] = 0x0c,
+		[PLL_OFF_USER_CTL_U] = 0x10,
+		[PLL_OFF_USER_CTL_U1] = 0x14,
+		[PLL_OFF_CONFIG_CTL] = 0x18,
+		[PLL_OFF_CONFIG_CTL_U] = 0x1c,
+		[PLL_OFF_CONFIG_CTL_U1] = 0x20,
+		[PLL_OFF_TEST_CTL] = 0x24,
+		[PLL_OFF_TEST_CTL_U] = 0x28,
+		[PLL_OFF_TEST_CTL_U1] = 0x2c,
+		[PLL_OFF_STATUS] = 0x30,
+		[PLL_OFF_OPMODE] = 0x38,
+		[PLL_OFF_ALPHA_VAL] = 0x40,
+	},
 };
 EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
 
@@ -134,15 +151,14 @@ EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
 #define PLL_HUAYRA_N_MASK		0xff
 #define PLL_HUAYRA_ALPHA_WIDTH		16
 
-#define FABIA_OPMODE_STANDBY	0x0
-#define FABIA_OPMODE_RUN	0x1
+#define PLL_STANDBY		0x0
+#define PLL_RUN			0x1
+#define PLL_OUT_MASK		0x7
+#define PLL_RATE_MARGIN		500
 
-#define FABIA_PLL_OUT_MASK	0x7
-#define FABIA_PLL_RATE_MARGIN	500
-
-#define TRION_PLL_STANDBY	0x0
-#define TRION_PLL_RUN		0x1
-#define TRION_PLL_OUT_MASK	0x7
+/* LUCID PLL specific settings and offsets */
+#define LUCID_PLL_CAL_VAL	0x44
+#define LUCID_PCAL_DONE		BIT(26)
 
 #define pll_alpha_width(p)					\
 		((PLL_ALPHA_VAL_U(p) - PLL_ALPHA_VAL(p) == 4) ?	\
@@ -544,7 +560,8 @@ static int __clk_alpha_pll_set_rate(struct clk_hw *hw, unsigned long rate,
 	rate = alpha_pll_round_rate(rate, prate, &l, &a, alpha_width);
 	vco = alpha_pll_find_vco(pll, rate);
 	if (pll->vco_table && !vco) {
-		pr_err("alpha pll not in a valid vco range\n");
+		pr_err("%s: alpha pll not in a valid vco range\n",
+		       clk_hw_get_name(hw));
 		return -EINVAL;
 	}
 
@@ -722,7 +739,7 @@ static int alpha_pll_huayra_set_rate(struct clk_hw *hw, unsigned long rate,
 	 */
 	if (clk_alpha_pll_is_enabled(hw)) {
 		if (cur_alpha != a) {
-			pr_err("clock needs to be gated %s\n",
+			pr_err("%s: clock needs to be gated\n",
 			       clk_hw_get_name(hw));
 			return -EBUSY;
 		}
@@ -765,7 +782,7 @@ static int trion_pll_is_enabled(struct clk_alpha_pll *pll,
 	if (ret)
 		return 0;
 
-	return ((opmode_regval & TRION_PLL_RUN) && (mode_regval & PLL_OUTCTRL));
+	return ((opmode_regval & PLL_RUN) && (mode_regval & PLL_OUTCTRL));
 }
 
 static int clk_trion_pll_is_enabled(struct clk_hw *hw)
@@ -795,7 +812,7 @@ static int clk_trion_pll_enable(struct clk_hw *hw)
 	}
 
 	/* Set operation mode to RUN */
-	regmap_write(regmap, PLL_OPMODE(pll), TRION_PLL_RUN);
+	regmap_write(regmap, PLL_OPMODE(pll), PLL_RUN);
 
 	ret = wait_for_pll_enable_lock(pll);
 	if (ret)
@@ -803,7 +820,7 @@ static int clk_trion_pll_enable(struct clk_hw *hw)
 
 	/* Enable the PLL outputs */
 	ret = regmap_update_bits(regmap, PLL_USER_CTL(pll),
-				 TRION_PLL_OUT_MASK, TRION_PLL_OUT_MASK);
+				 PLL_OUT_MASK, PLL_OUT_MASK);
 	if (ret)
 		return ret;
 
@@ -836,12 +853,12 @@ static void clk_trion_pll_disable(struct clk_hw *hw)
 
 	/* Disable the PLL outputs */
 	ret = regmap_update_bits(regmap, PLL_USER_CTL(pll),
-				 TRION_PLL_OUT_MASK, 0);
+				 PLL_OUT_MASK, 0);
 	if (ret)
 		return;
 
 	/* Place the PLL mode in STANDBY */
-	regmap_write(regmap, PLL_OPMODE(pll), TRION_PLL_STANDBY);
+	regmap_write(regmap, PLL_OPMODE(pll), PLL_STANDBY);
 	regmap_update_bits(regmap, PLL_MODE(pll), PLL_RESET_N, PLL_RESET_N);
 }
 
@@ -849,33 +866,12 @@ static unsigned long
 clk_trion_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
 {
 	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
-	struct regmap *regmap = pll->clkr.regmap;
-	u32 l, frac;
-	u64 prate = parent_rate;
+	u32 l, frac, alpha_width = pll_alpha_width(pll);
 
-	regmap_read(regmap, PLL_L_VAL(pll), &l);
-	regmap_read(regmap, PLL_ALPHA_VAL(pll), &frac);
+	regmap_read(pll->clkr.regmap, PLL_L_VAL(pll), &l);
+	regmap_read(pll->clkr.regmap, PLL_ALPHA_VAL(pll), &frac);
 
-	return alpha_pll_calc_rate(prate, l, frac, ALPHA_REG_16BIT_WIDTH);
-}
-
-static long clk_trion_pll_round_rate(struct clk_hw *hw, unsigned long rate,
-				     unsigned long *prate)
-{
-	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
-	unsigned long min_freq, max_freq;
-	u32 l;
-	u64 a;
-
-	rate = alpha_pll_round_rate(rate, *prate,
-				    &l, &a, ALPHA_REG_16BIT_WIDTH);
-	if (!pll->vco_table || alpha_pll_find_vco(pll, rate))
-		return rate;
-
-	min_freq = pll->vco_table[0].min_freq;
-	max_freq = pll->vco_table[pll->num_vco - 1].max_freq;
-
-	return clamp(rate, min_freq, max_freq);
+	return alpha_pll_calc_rate(parent_rate, l, frac, alpha_width);
 }
 
 const struct clk_ops clk_alpha_pll_fixed_ops = {
@@ -921,7 +917,7 @@ const struct clk_ops clk_trion_fixed_pll_ops = {
 	.disable = clk_trion_pll_disable,
 	.is_enabled = clk_trion_pll_is_enabled,
 	.recalc_rate = clk_trion_pll_recalc_rate,
-	.round_rate = clk_trion_pll_round_rate,
+	.round_rate = clk_alpha_pll_round_rate,
 };
 EXPORT_SYMBOL_GPL(clk_trion_fixed_pll_ops);
 
@@ -1088,14 +1084,14 @@ static int alpha_pll_fabia_enable(struct clk_hw *hw)
 		return ret;
 
 	/* Skip If PLL is already running */
-	if ((opmode_val & FABIA_OPMODE_RUN) && (val & PLL_OUTCTRL))
+	if ((opmode_val & PLL_RUN) && (val & PLL_OUTCTRL))
 		return 0;
 
 	ret = regmap_update_bits(regmap, PLL_MODE(pll), PLL_OUTCTRL, 0);
 	if (ret)
 		return ret;
 
-	ret = regmap_write(regmap, PLL_OPMODE(pll), FABIA_OPMODE_STANDBY);
+	ret = regmap_write(regmap, PLL_OPMODE(pll), PLL_STANDBY);
 	if (ret)
 		return ret;
 
@@ -1104,7 +1100,7 @@ static int alpha_pll_fabia_enable(struct clk_hw *hw)
 	if (ret)
 		return ret;
 
-	ret = regmap_write(regmap, PLL_OPMODE(pll), FABIA_OPMODE_RUN);
+	ret = regmap_write(regmap, PLL_OPMODE(pll), PLL_RUN);
 	if (ret)
 		return ret;
 
@@ -1113,7 +1109,7 @@ static int alpha_pll_fabia_enable(struct clk_hw *hw)
 		return ret;
 
 	ret = regmap_update_bits(regmap, PLL_USER_CTL(pll),
-				 FABIA_PLL_OUT_MASK, FABIA_PLL_OUT_MASK);
+				 PLL_OUT_MASK, PLL_OUT_MASK);
 	if (ret)
 		return ret;
 
@@ -1143,13 +1139,12 @@ static void alpha_pll_fabia_disable(struct clk_hw *hw)
 		return;
 
 	/* Disable main outputs */
-	ret = regmap_update_bits(regmap, PLL_USER_CTL(pll), FABIA_PLL_OUT_MASK,
-				 0);
+	ret = regmap_update_bits(regmap, PLL_USER_CTL(pll), PLL_OUT_MASK, 0);
 	if (ret)
 		return;
 
 	/* Place the PLL in STANDBY */
-	regmap_write(regmap, PLL_OPMODE(pll), FABIA_OPMODE_STANDBY);
+	regmap_write(regmap, PLL_OPMODE(pll), PLL_STANDBY);
 }
 
 static unsigned long alpha_pll_fabia_recalc_rate(struct clk_hw *hw,
@@ -1170,7 +1165,7 @@ static int alpha_pll_fabia_set_rate(struct clk_hw *hw, unsigned long rate,
 	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
 	u32 l, alpha_width = pll_alpha_width(pll);
 	u64 a;
-	unsigned long rrate;
+	unsigned long rrate, max = rate + PLL_RATE_MARGIN;
 
 	rrate = alpha_pll_round_rate(rate, prate, &l, &a, alpha_width);
 
@@ -1178,8 +1173,9 @@ static int alpha_pll_fabia_set_rate(struct clk_hw *hw, unsigned long rate,
 	 * Due to limited number of bits for fractional rate programming, the
 	 * rounded up rate could be marginally higher than the requested rate.
 	 */
-	if (rrate > (rate + FABIA_PLL_RATE_MARGIN) || rrate < rate) {
-		pr_err("Call set rate on the PLL with rounded rates!\n");
+	if (rrate > (rate + PLL_RATE_MARGIN) || rrate < rate) {
+		pr_err("%s: Rounded rate %lu not within range [%lu, %lu)\n",
+		       clk_hw_get_name(hw), rrate, rate, max);
 		return -EINVAL;
 	}
 
@@ -1196,6 +1192,7 @@ static int alpha_pll_fabia_prepare(struct clk_hw *hw)
 	struct clk_hw *parent_hw;
 	unsigned long cal_freq, rrate;
 	u32 cal_l, val, alpha_width = pll_alpha_width(pll);
+	const char *name = clk_hw_get_name(hw);
 	u64 a;
 	int ret;
 
@@ -1210,7 +1207,7 @@ static int alpha_pll_fabia_prepare(struct clk_hw *hw)
 
 	vco = alpha_pll_find_vco(pll, clk_hw_get_rate(hw));
 	if (!vco) {
-		pr_err("alpha pll: not in a valid vco range\n");
+		pr_err("%s: alpha pll not in a valid vco range\n", name);
 		return -EINVAL;
 	}
 
@@ -1227,7 +1224,7 @@ static int alpha_pll_fabia_prepare(struct clk_hw *hw)
 	 * Due to a limited number of bits for fractional rate programming, the
 	 * rounded up rate could be marginally higher than the requested rate.
 	 */
-	if (rrate > (cal_freq + FABIA_PLL_RATE_MARGIN) || rrate < cal_freq)
+	if (rrate > (cal_freq + PLL_RATE_MARGIN) || rrate < cal_freq)
 		return -EINVAL;
 
 	/* Setup PLL for calibration frequency */
@@ -1236,7 +1233,7 @@ static int alpha_pll_fabia_prepare(struct clk_hw *hw)
 	/* Bringup the PLL at calibration frequency */
 	ret = clk_alpha_pll_enable(hw);
 	if (ret) {
-		pr_err("alpha pll calibration failed\n");
+		pr_err("%s: alpha pll calibration failed\n", name);
 		return ret;
 	}
 
@@ -1394,3 +1391,175 @@ const struct clk_ops clk_alpha_pll_postdiv_fabia_ops = {
 	.set_rate = clk_alpha_pll_postdiv_fabia_set_rate,
 };
 EXPORT_SYMBOL_GPL(clk_alpha_pll_postdiv_fabia_ops);
+
+/**
+ * clk_lucid_pll_configure - configure the lucid pll
+ *
+ * @pll: clk alpha pll
+ * @regmap: register map
+ * @config: configuration to apply for pll
+ */
+void clk_lucid_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
+			     const struct alpha_pll_config *config)
+{
+	if (config->l)
+		regmap_write(regmap, PLL_L_VAL(pll), config->l);
+
+	regmap_write(regmap, PLL_CAL_L_VAL(pll), LUCID_PLL_CAL_VAL);
+
+	if (config->alpha)
+		regmap_write(regmap, PLL_ALPHA_VAL(pll), config->alpha);
+
+	if (config->config_ctl_val)
+		regmap_write(regmap, PLL_CONFIG_CTL(pll),
+			     config->config_ctl_val);
+
+	if (config->config_ctl_hi_val)
+		regmap_write(regmap, PLL_CONFIG_CTL_U(pll),
+			     config->config_ctl_hi_val);
+
+	if (config->config_ctl_hi1_val)
+		regmap_write(regmap, PLL_CONFIG_CTL_U1(pll),
+			     config->config_ctl_hi1_val);
+
+	if (config->user_ctl_val)
+		regmap_write(regmap, PLL_USER_CTL(pll),
+			     config->user_ctl_val);
+
+	if (config->user_ctl_hi_val)
+		regmap_write(regmap, PLL_USER_CTL_U(pll),
+			     config->user_ctl_hi_val);
+
+	if (config->user_ctl_hi1_val)
+		regmap_write(regmap, PLL_USER_CTL_U1(pll),
+			     config->user_ctl_hi1_val);
+
+	if (config->test_ctl_val)
+		regmap_write(regmap, PLL_TEST_CTL(pll),
+			     config->test_ctl_val);
+
+	if (config->test_ctl_hi_val)
+		regmap_write(regmap, PLL_TEST_CTL_U(pll),
+			     config->test_ctl_hi_val);
+
+	if (config->test_ctl_hi1_val)
+		regmap_write(regmap, PLL_TEST_CTL_U1(pll),
+			     config->test_ctl_hi1_val);
+
+	regmap_update_bits(regmap, PLL_MODE(pll), PLL_UPDATE_BYPASS,
+			   PLL_UPDATE_BYPASS);
+
+	/* Disable PLL output */
+	regmap_update_bits(regmap, PLL_MODE(pll),  PLL_OUTCTRL, 0);
+
+	/* Set operation mode to OFF */
+	regmap_write(regmap, PLL_OPMODE(pll), PLL_STANDBY);
+
+	/* Place the PLL in STANDBY mode */
+	regmap_update_bits(regmap, PLL_MODE(pll), PLL_RESET_N, PLL_RESET_N);
+}
+EXPORT_SYMBOL_GPL(clk_lucid_pll_configure);
+
+/*
+ * The Lucid PLL requires a power-on self-calibration which happens when the
+ * PLL comes out of reset. Calibrate in case it is not completed.
+ */
+static int alpha_pll_lucid_prepare(struct clk_hw *hw)
+{
+	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
+	u32 regval;
+	int ret;
+
+	/* Return early if calibration is not needed. */
+	regmap_read(pll->clkr.regmap, PLL_STATUS(pll), &regval);
+	if (regval & LUCID_PCAL_DONE)
+		return 0;
+
+	/* On/off to calibrate */
+	ret = clk_trion_pll_enable(hw);
+	if (!ret)
+		clk_trion_pll_disable(hw);
+
+	return ret;
+}
+
+static int alpha_pll_lucid_set_rate(struct clk_hw *hw, unsigned long rate,
+				    unsigned long prate)
+{
+	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
+	unsigned long rrate;
+	u32 regval, l, alpha_width = pll_alpha_width(pll);
+	u64 a;
+	int ret;
+
+	rrate = alpha_pll_round_rate(rate, prate, &l, &a, alpha_width);
+
+	/*
+	 * Due to a limited number of bits for fractional rate programming, the
+	 * rounded up rate could be marginally higher than the requested rate.
+	 */
+	if (rrate > (rate + PLL_RATE_MARGIN) || rrate < rate) {
+		pr_err("Call set rate on the PLL with rounded rates!\n");
+		return -EINVAL;
+	}
+
+	regmap_write(pll->clkr.regmap, PLL_L_VAL(pll), l);
+	regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), a);
+
+	/* Latch the PLL input */
+	ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll),
+				 PLL_UPDATE, PLL_UPDATE);
+	if (ret)
+		return ret;
+
+	/* Wait for 2 reference cycles before checking the ACK bit. */
+	udelay(1);
+	regmap_read(pll->clkr.regmap, PLL_MODE(pll), &regval);
+	if (!(regval & ALPHA_PLL_ACK_LATCH)) {
+		pr_err("Lucid PLL latch failed. Output may be unstable!\n");
+		return -EINVAL;
+	}
+
+	/* Return the latch input to 0 */
+	ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll),
+				 PLL_UPDATE, 0);
+	if (ret)
+		return ret;
+
+	if (clk_hw_is_enabled(hw)) {
+		ret = wait_for_pll_enable_lock(pll);
+		if (ret)
+			return ret;
+	}
+
+	/* Wait for PLL output to stabilize */
+	udelay(100);
+	return 0;
+}
+
+const struct clk_ops clk_alpha_pll_lucid_ops = {
+	.prepare = alpha_pll_lucid_prepare,
+	.enable = clk_trion_pll_enable,
+	.disable = clk_trion_pll_disable,
+	.is_enabled = clk_trion_pll_is_enabled,
+	.recalc_rate = clk_trion_pll_recalc_rate,
+	.round_rate = clk_alpha_pll_round_rate,
+	.set_rate = alpha_pll_lucid_set_rate,
+};
+EXPORT_SYMBOL_GPL(clk_alpha_pll_lucid_ops);
+
+const struct clk_ops clk_alpha_pll_fixed_lucid_ops = {
+	.enable = clk_trion_pll_enable,
+	.disable = clk_trion_pll_disable,
+	.is_enabled = clk_trion_pll_is_enabled,
+	.recalc_rate = clk_trion_pll_recalc_rate,
+	.round_rate = clk_alpha_pll_round_rate,
+};
+EXPORT_SYMBOL_GPL(clk_alpha_pll_fixed_lucid_ops);
+
+const struct clk_ops clk_alpha_pll_postdiv_lucid_ops = {
+	.recalc_rate = clk_alpha_pll_postdiv_fabia_recalc_rate,
+	.round_rate = clk_alpha_pll_postdiv_fabia_round_rate,
+	.set_rate = clk_alpha_pll_postdiv_fabia_set_rate,
+};
+EXPORT_SYMBOL_GPL(clk_alpha_pll_postdiv_lucid_ops);
diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h
index fbc1f67..704674a 100644
--- a/drivers/clk/qcom/clk-alpha-pll.h
+++ b/drivers/clk/qcom/clk-alpha-pll.h
@@ -14,6 +14,7 @@ enum {
 	CLK_ALPHA_PLL_TYPE_BRAMMO,
 	CLK_ALPHA_PLL_TYPE_FABIA,
 	CLK_ALPHA_PLL_TYPE_TRION,
+	CLK_ALPHA_PLL_TYPE_LUCID,
 	CLK_ALPHA_PLL_TYPE_MAX,
 };
 
@@ -30,6 +31,7 @@ enum {
 	PLL_OFF_CONFIG_CTL_U1,
 	PLL_OFF_TEST_CTL,
 	PLL_OFF_TEST_CTL_U,
+	PLL_OFF_TEST_CTL_U1,
 	PLL_OFF_STATUS,
 	PLL_OFF_OPMODE,
 	PLL_OFF_FRAC,
@@ -94,10 +96,13 @@ struct alpha_pll_config {
 	u32 alpha_hi;
 	u32 config_ctl_val;
 	u32 config_ctl_hi_val;
+	u32 config_ctl_hi1_val;
 	u32 user_ctl_val;
 	u32 user_ctl_hi_val;
+	u32 user_ctl_hi1_val;
 	u32 test_ctl_val;
 	u32 test_ctl_hi_val;
+	u32 test_ctl_hi1_val;
 	u32 main_output_mask;
 	u32 aux_output_mask;
 	u32 aux2_output_mask;
@@ -123,10 +128,17 @@ extern const struct clk_ops clk_alpha_pll_fabia_ops;
 extern const struct clk_ops clk_alpha_pll_fixed_fabia_ops;
 extern const struct clk_ops clk_alpha_pll_postdiv_fabia_ops;
 
+extern const struct clk_ops clk_alpha_pll_lucid_ops;
+extern const struct clk_ops clk_alpha_pll_fixed_lucid_ops;
+extern const struct clk_ops clk_alpha_pll_postdiv_lucid_ops;
+
 void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
 			     const struct alpha_pll_config *config);
 void clk_fabia_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
 				const struct alpha_pll_config *config);
+void clk_lucid_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
+			     const struct alpha_pll_config *config);
+
 extern const struct clk_ops clk_trion_fixed_pll_ops;
 extern const struct clk_ops clk_trion_pll_postdiv_ops;
 
diff --git a/drivers/clk/qcom/clk-rpm.c b/drivers/clk/qcom/clk-rpm.c
index 9e3110a..f71d228 100644
--- a/drivers/clk/qcom/clk-rpm.c
+++ b/drivers/clk/qcom/clk-rpm.c
@@ -543,10 +543,45 @@ static const struct rpm_clk_desc rpm_clk_apq8064 = {
 	.num_clks = ARRAY_SIZE(apq8064_clks),
 };
 
+/* ipq806x */
+DEFINE_CLK_RPM(ipq806x, afab_clk, afab_a_clk, QCOM_RPM_APPS_FABRIC_CLK);
+DEFINE_CLK_RPM(ipq806x, cfpb_clk, cfpb_a_clk, QCOM_RPM_CFPB_CLK);
+DEFINE_CLK_RPM(ipq806x, daytona_clk, daytona_a_clk, QCOM_RPM_DAYTONA_FABRIC_CLK);
+DEFINE_CLK_RPM(ipq806x, ebi1_clk, ebi1_a_clk, QCOM_RPM_EBI1_CLK);
+DEFINE_CLK_RPM(ipq806x, sfab_clk, sfab_a_clk, QCOM_RPM_SYS_FABRIC_CLK);
+DEFINE_CLK_RPM(ipq806x, sfpb_clk, sfpb_a_clk, QCOM_RPM_SFPB_CLK);
+DEFINE_CLK_RPM(ipq806x, nss_fabric_0_clk, nss_fabric_0_a_clk, QCOM_RPM_NSS_FABRIC_0_CLK);
+DEFINE_CLK_RPM(ipq806x, nss_fabric_1_clk, nss_fabric_1_a_clk, QCOM_RPM_NSS_FABRIC_1_CLK);
+
+static struct clk_rpm *ipq806x_clks[] = {
+	[RPM_APPS_FABRIC_CLK] = &ipq806x_afab_clk,
+	[RPM_APPS_FABRIC_A_CLK] = &ipq806x_afab_a_clk,
+	[RPM_CFPB_CLK] = &ipq806x_cfpb_clk,
+	[RPM_CFPB_A_CLK] = &ipq806x_cfpb_a_clk,
+	[RPM_DAYTONA_FABRIC_CLK] = &ipq806x_daytona_clk,
+	[RPM_DAYTONA_FABRIC_A_CLK] = &ipq806x_daytona_a_clk,
+	[RPM_EBI1_CLK] = &ipq806x_ebi1_clk,
+	[RPM_EBI1_A_CLK] = &ipq806x_ebi1_a_clk,
+	[RPM_SYS_FABRIC_CLK] = &ipq806x_sfab_clk,
+	[RPM_SYS_FABRIC_A_CLK] = &ipq806x_sfab_a_clk,
+	[RPM_SFPB_CLK] = &ipq806x_sfpb_clk,
+	[RPM_SFPB_A_CLK] = &ipq806x_sfpb_a_clk,
+	[RPM_NSS_FABRIC_0_CLK] = &ipq806x_nss_fabric_0_clk,
+	[RPM_NSS_FABRIC_0_A_CLK] = &ipq806x_nss_fabric_0_a_clk,
+	[RPM_NSS_FABRIC_1_CLK] = &ipq806x_nss_fabric_1_clk,
+	[RPM_NSS_FABRIC_1_A_CLK] = &ipq806x_nss_fabric_1_a_clk,
+};
+
+static const struct rpm_clk_desc rpm_clk_ipq806x = {
+	.clks = ipq806x_clks,
+	.num_clks = ARRAY_SIZE(ipq806x_clks),
+};
+
 static const struct of_device_id rpm_clk_match_table[] = {
 	{ .compatible = "qcom,rpmcc-msm8660", .data = &rpm_clk_msm8660 },
 	{ .compatible = "qcom,rpmcc-apq8060", .data = &rpm_clk_msm8660 },
 	{ .compatible = "qcom,rpmcc-apq8064", .data = &rpm_clk_apq8064 },
+	{ .compatible = "qcom,rpmcc-ipq806x", .data = &rpm_clk_ipq806x },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, rpm_clk_match_table);
diff --git a/drivers/clk/qcom/clk-rpmh.c b/drivers/clk/qcom/clk-rpmh.c
index 98a118c..e2c669b 100644
--- a/drivers/clk/qcom/clk-rpmh.c
+++ b/drivers/clk/qcom/clk-rpmh.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
  */
 
 #include <linux/clk-provider.h>
@@ -143,12 +143,22 @@ static inline bool has_state_changed(struct clk_rpmh *c, u32 state)
 		!= (c->aggr_state & BIT(state));
 }
 
+static int clk_rpmh_send(struct clk_rpmh *c, enum rpmh_state state,
+			 struct tcs_cmd *cmd, bool wait)
+{
+	if (wait)
+		return rpmh_write(c->dev, state, cmd, 1);
+
+	return rpmh_write_async(c->dev, state, cmd, 1);
+}
+
 static int clk_rpmh_send_aggregate_command(struct clk_rpmh *c)
 {
 	struct tcs_cmd cmd = { 0 };
 	u32 cmd_state, on_val;
 	enum rpmh_state state = RPMH_SLEEP_STATE;
 	int ret;
+	bool wait;
 
 	cmd.addr = c->res_addr;
 	cmd_state = c->aggr_state;
@@ -159,7 +169,8 @@ static int clk_rpmh_send_aggregate_command(struct clk_rpmh *c)
 			if (cmd_state & BIT(state))
 				cmd.data = on_val;
 
-			ret = rpmh_write_async(c->dev, state, &cmd, 1);
+			wait = cmd_state && state == RPMH_ACTIVE_ONLY_STATE;
+			ret = clk_rpmh_send(c, state, &cmd, wait);
 			if (ret) {
 				dev_err(c->dev, "set %s state of %s failed: (%d)\n",
 					!state ? "sleep" :
@@ -216,7 +227,7 @@ static int clk_rpmh_prepare(struct clk_hw *hw)
 	mutex_unlock(&rpmh_clk_lock);
 
 	return ret;
-};
+}
 
 static void clk_rpmh_unprepare(struct clk_hw *hw)
 {
@@ -248,38 +259,33 @@ static int clk_rpmh_bcm_send_cmd(struct clk_rpmh *c, bool enable)
 {
 	struct tcs_cmd cmd = { 0 };
 	u32 cmd_state;
-	int ret;
+	int ret = 0;
 
 	mutex_lock(&rpmh_clk_lock);
-
-	cmd_state = 0;
 	if (enable) {
 		cmd_state = 1;
 		if (c->aggr_state)
 			cmd_state = c->aggr_state;
+	} else {
+		cmd_state = 0;
 	}
 
-	if (c->last_sent_aggr_state == cmd_state) {
-		mutex_unlock(&rpmh_clk_lock);
-		return 0;
+	if (c->last_sent_aggr_state != cmd_state) {
+		cmd.addr = c->res_addr;
+		cmd.data = BCM_TCS_CMD(1, enable, 0, cmd_state);
+
+		ret = clk_rpmh_send(c, RPMH_ACTIVE_ONLY_STATE, &cmd, enable);
+		if (ret) {
+			dev_err(c->dev, "set active state of %s failed: (%d)\n",
+				c->res_name, ret);
+		} else {
+			c->last_sent_aggr_state = cmd_state;
+		}
 	}
 
-	cmd.addr = c->res_addr;
-	cmd.data = BCM_TCS_CMD(1, enable, 0, cmd_state);
-
-	ret = rpmh_write_async(c->dev, RPMH_ACTIVE_ONLY_STATE, &cmd, 1);
-	if (ret) {
-		dev_err(c->dev, "set active state of %s failed: (%d)\n",
-			c->res_name, ret);
-		mutex_unlock(&rpmh_clk_lock);
-		return ret;
-	}
-
-	c->last_sent_aggr_state = cmd_state;
-
 	mutex_unlock(&rpmh_clk_lock);
 
-	return 0;
+	return ret;
 }
 
 static int clk_rpmh_bcm_prepare(struct clk_hw *hw)
@@ -287,14 +293,14 @@ static int clk_rpmh_bcm_prepare(struct clk_hw *hw)
 	struct clk_rpmh *c = to_clk_rpmh(hw);
 
 	return clk_rpmh_bcm_send_cmd(c, true);
-};
+}
 
 static void clk_rpmh_bcm_unprepare(struct clk_hw *hw)
 {
 	struct clk_rpmh *c = to_clk_rpmh(hw);
 
 	clk_rpmh_bcm_send_cmd(c, false);
-};
+}
 
 static int clk_rpmh_bcm_set_rate(struct clk_hw *hw, unsigned long rate,
 				 unsigned long parent_rate)
@@ -310,7 +316,7 @@ static int clk_rpmh_bcm_set_rate(struct clk_hw *hw, unsigned long rate,
 		clk_rpmh_bcm_send_cmd(c, true);
 
 	return 0;
-};
+}
 
 static long clk_rpmh_round_rate(struct clk_hw *hw, unsigned long rate,
 				unsigned long *parent_rate)
@@ -404,6 +410,28 @@ static const struct clk_rpmh_desc clk_rpmh_sc7180 = {
 	.num_clks = ARRAY_SIZE(sc7180_rpmh_clocks),
 };
 
+DEFINE_CLK_RPMH_VRM(sm8250, ln_bb_clk1, ln_bb_clk1_ao, "lnbclka1", 2);
+
+static struct clk_hw *sm8250_rpmh_clocks[] = {
+	[RPMH_CXO_CLK]		= &sdm845_bi_tcxo.hw,
+	[RPMH_CXO_CLK_A]	= &sdm845_bi_tcxo_ao.hw,
+	[RPMH_LN_BB_CLK1]	= &sm8250_ln_bb_clk1.hw,
+	[RPMH_LN_BB_CLK1_A]	= &sm8250_ln_bb_clk1_ao.hw,
+	[RPMH_LN_BB_CLK2]	= &sdm845_ln_bb_clk2.hw,
+	[RPMH_LN_BB_CLK2_A]	= &sdm845_ln_bb_clk2_ao.hw,
+	[RPMH_LN_BB_CLK3]	= &sdm845_ln_bb_clk3.hw,
+	[RPMH_LN_BB_CLK3_A]	= &sdm845_ln_bb_clk3_ao.hw,
+	[RPMH_RF_CLK1]		= &sdm845_rf_clk1.hw,
+	[RPMH_RF_CLK1_A]	= &sdm845_rf_clk1_ao.hw,
+	[RPMH_RF_CLK3]		= &sdm845_rf_clk3.hw,
+	[RPMH_RF_CLK3_A]	= &sdm845_rf_clk3_ao.hw,
+};
+
+static const struct clk_rpmh_desc clk_rpmh_sm8250 = {
+	.clks = sm8250_rpmh_clocks,
+	.num_clks = ARRAY_SIZE(sm8250_rpmh_clocks),
+};
+
 static struct clk_hw *of_clk_rpmh_hw_get(struct of_phandle_args *clkspec,
 					 void *data)
 {
@@ -490,6 +518,7 @@ static const struct of_device_id clk_rpmh_match_table[] = {
 	{ .compatible = "qcom,sc7180-rpmh-clk", .data = &clk_rpmh_sc7180},
 	{ .compatible = "qcom,sdm845-rpmh-clk", .data = &clk_rpmh_sdm845},
 	{ .compatible = "qcom,sm8150-rpmh-clk", .data = &clk_rpmh_sm8150},
+	{ .compatible = "qcom,sm8250-rpmh-clk", .data = &clk_rpmh_sm8250},
 	{ }
 };
 MODULE_DEVICE_TABLE(of, clk_rpmh_match_table);
diff --git a/drivers/clk/qcom/clk-smd-rpm.c b/drivers/clk/qcom/clk-smd-rpm.c
index 0bbfef9..52f63ad 100644
--- a/drivers/clk/qcom/clk-smd-rpm.c
+++ b/drivers/clk/qcom/clk-smd-rpm.c
@@ -525,6 +525,55 @@ static const struct rpm_smd_clk_desc rpm_clk_msm8974 = {
 	.num_clks = ARRAY_SIZE(msm8974_clks),
 };
 
+
+/* msm8976 */
+DEFINE_CLK_SMD_RPM(msm8976, pcnoc_clk, pcnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 0);
+DEFINE_CLK_SMD_RPM(msm8976, snoc_clk, snoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 1);
+DEFINE_CLK_SMD_RPM(msm8976, mmssnoc_ahb_clk, mmssnoc_ahb_a_clk,
+		   QCOM_SMD_RPM_BUS_CLK, 2);
+DEFINE_CLK_SMD_RPM(msm8976, bimc_clk, bimc_a_clk, QCOM_SMD_RPM_MEM_CLK, 0);
+DEFINE_CLK_SMD_RPM(msm8976, ipa_clk, ipa_a_clk, QCOM_SMD_RPM_IPA_CLK, 0);
+DEFINE_CLK_SMD_RPM_QDSS(msm8976, qdss_clk, qdss_a_clk,
+			QCOM_SMD_RPM_MISC_CLK, 1);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8976, bb_clk1, bb_clk1_a, 1);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8976, bb_clk2, bb_clk2_a, 2);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8976, rf_clk2, rf_clk2_a, 5);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8976, div_clk2, div_clk2_a, 12);
+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8976, bb_clk1_pin, bb_clk1_a_pin, 1);
+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8976, bb_clk2_pin, bb_clk2_a_pin, 2);
+
+static struct clk_smd_rpm *msm8976_clks[] = {
+	[RPM_SMD_PCNOC_CLK] = &msm8976_pcnoc_clk,
+	[RPM_SMD_PCNOC_A_CLK] = &msm8976_pcnoc_a_clk,
+	[RPM_SMD_SNOC_CLK] = &msm8976_snoc_clk,
+	[RPM_SMD_SNOC_A_CLK] = &msm8976_snoc_a_clk,
+	[RPM_SMD_BIMC_CLK] = &msm8976_bimc_clk,
+	[RPM_SMD_BIMC_A_CLK] = &msm8976_bimc_a_clk,
+	[RPM_SMD_QDSS_CLK] = &msm8976_qdss_clk,
+	[RPM_SMD_QDSS_A_CLK] = &msm8976_qdss_a_clk,
+	[RPM_SMD_BB_CLK1] = &msm8976_bb_clk1,
+	[RPM_SMD_BB_CLK1_A] = &msm8976_bb_clk1_a,
+	[RPM_SMD_BB_CLK2] = &msm8976_bb_clk2,
+	[RPM_SMD_BB_CLK2_A] = &msm8976_bb_clk2_a,
+	[RPM_SMD_RF_CLK2] = &msm8976_rf_clk2,
+	[RPM_SMD_RF_CLK2_A] = &msm8976_rf_clk2_a,
+	[RPM_SMD_BB_CLK1_PIN] = &msm8976_bb_clk1_pin,
+	[RPM_SMD_BB_CLK1_A_PIN] = &msm8976_bb_clk1_a_pin,
+	[RPM_SMD_BB_CLK2_PIN] = &msm8976_bb_clk2_pin,
+	[RPM_SMD_BB_CLK2_A_PIN] = &msm8976_bb_clk2_a_pin,
+	[RPM_SMD_MMSSNOC_AHB_CLK] = &msm8976_mmssnoc_ahb_clk,
+	[RPM_SMD_MMSSNOC_AHB_A_CLK] = &msm8976_mmssnoc_ahb_a_clk,
+	[RPM_SMD_DIV_CLK2] = &msm8976_div_clk2,
+	[RPM_SMD_DIV_A_CLK2] = &msm8976_div_clk2_a,
+	[RPM_SMD_IPA_CLK] = &msm8976_ipa_clk,
+	[RPM_SMD_IPA_A_CLK] = &msm8976_ipa_a_clk,
+};
+
+static const struct rpm_smd_clk_desc rpm_clk_msm8976 = {
+	.clks = msm8976_clks,
+	.num_clks = ARRAY_SIZE(msm8976_clks),
+};
+
 /* msm8996 */
 DEFINE_CLK_SMD_RPM(msm8996, pcnoc_clk, pcnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 0);
 DEFINE_CLK_SMD_RPM(msm8996, snoc_clk, snoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 1);
@@ -720,6 +769,7 @@ static const struct rpm_smd_clk_desc rpm_clk_msm8998 = {
 static const struct of_device_id rpm_smd_clk_match_table[] = {
 	{ .compatible = "qcom,rpmcc-msm8916", .data = &rpm_clk_msm8916 },
 	{ .compatible = "qcom,rpmcc-msm8974", .data = &rpm_clk_msm8974 },
+	{ .compatible = "qcom,rpmcc-msm8976", .data = &rpm_clk_msm8976 },
 	{ .compatible = "qcom,rpmcc-msm8996", .data = &rpm_clk_msm8996 },
 	{ .compatible = "qcom,rpmcc-msm8998", .data = &rpm_clk_msm8998 },
 	{ .compatible = "qcom,rpmcc-qcs404",  .data = &rpm_clk_qcs404  },
diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c
index b0eee09..a8456e0 100644
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -1224,6 +1224,8 @@ static struct clk_rcg prng_src = {
 		.parent_map = gcc_pxo_pll8_map,
 	},
 	.clkr = {
+		.enable_reg = 0x2e80,
+		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "prng_src",
 			.parent_names = gcc_pxo_pll8,
diff --git a/drivers/clk/qcom/gcc-sc7180.c b/drivers/clk/qcom/gcc-sc7180.c
index 7f59fb8..6a51b5b 100644
--- a/drivers/clk/qcom/gcc-sc7180.c
+++ b/drivers/clk/qcom/gcc-sc7180.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
  */
 
 #include <linux/clk-provider.h>
@@ -2165,6 +2165,71 @@ static struct clk_branch gcc_video_xo_clk = {
 	},
 };
 
+static struct clk_branch gcc_mss_cfg_ahb_clk = {
+	.halt_reg = 0x8a000,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x8a000,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_mss_cfg_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_mss_mfab_axis_clk = {
+	.halt_reg = 0x8a004,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x8a004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_mss_mfab_axis_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_mss_nav_axi_clk = {
+	.halt_reg = 0x8a00c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x8a00c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_mss_nav_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_mss_snoc_axi_clk = {
+	.halt_reg = 0x8a150,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x8a150,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_mss_snoc_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_mss_q6_memnoc_axi_clk = {
+	.halt_reg = 0x8a154,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x8a154,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_mss_q6_memnoc_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
 static struct gdsc ufs_phy_gdsc = {
 	.gdscr = 0x77004,
 	.pd = {
@@ -2336,6 +2401,11 @@ static struct clk_regmap *gcc_sc7180_clocks[] = {
 	[GPLL7] = &gpll7.clkr,
 	[GPLL4] = &gpll4.clkr,
 	[GPLL1] = &gpll1.clkr,
+	[GCC_MSS_CFG_AHB_CLK] = &gcc_mss_cfg_ahb_clk.clkr,
+	[GCC_MSS_MFAB_AXIS_CLK] = &gcc_mss_mfab_axis_clk.clkr,
+	[GCC_MSS_NAV_AXI_CLK] = &gcc_mss_nav_axi_clk.clkr,
+	[GCC_MSS_Q6_MEMNOC_AXI_CLK] = &gcc_mss_q6_memnoc_axi_clk.clkr,
+	[GCC_MSS_SNOC_AXI_CLK] = &gcc_mss_snoc_axi_clk.clkr,
 };
 
 static const struct qcom_reset_map gcc_sc7180_resets[] = {
diff --git a/drivers/clk/qcom/gcc-sm8150.c b/drivers/clk/qcom/gcc-sm8150.c
index 2087721..ef98fdc 100644
--- a/drivers/clk/qcom/gcc-sm8150.c
+++ b/drivers/clk/qcom/gcc-sm8150.c
@@ -21,6 +21,7 @@
 #include "clk-rcg.h"
 #include "clk-regmap.h"
 #include "reset.h"
+#include "gdsc.h"
 
 enum {
 	P_BI_TCXO,
@@ -3171,6 +3172,18 @@ static struct clk_branch gcc_usb3_prim_phy_com_aux_clk = {
 	},
 };
 
+static struct clk_branch gcc_usb3_prim_phy_pipe_clk = {
+	.halt_check = BRANCH_HALT_SKIP,
+	.clkr = {
+		.enable_reg = 0xf058,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_usb3_prim_phy_pipe_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
 static struct clk_branch gcc_usb3_sec_clkref_clk = {
 	.halt_reg = 0x8c028,
 	.halt_check = BRANCH_HALT,
@@ -3218,6 +3231,18 @@ static struct clk_branch gcc_usb3_sec_phy_com_aux_clk = {
 	},
 };
 
+static struct clk_branch gcc_usb3_sec_phy_pipe_clk = {
+	.halt_check = BRANCH_HALT_SKIP,
+	.clkr = {
+		.enable_reg = 0x10058,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_usb3_sec_phy_pipe_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
 /*
  * Clock ON depends on external parent 'config noc', so cant poll
  * delay and also mark as crtitical for video boot
@@ -3292,6 +3317,24 @@ static struct clk_branch gcc_video_xo_clk = {
 	},
 };
 
+static struct gdsc usb30_prim_gdsc = {
+		.gdscr = 0xf004,
+		.pd = {
+			.name = "usb30_prim_gdsc",
+		},
+		.pwrsts = PWRSTS_OFF_ON,
+		.flags = POLL_CFG_GDSCR,
+};
+
+static struct gdsc usb30_sec_gdsc = {
+		.gdscr = 0x10004,
+		.pd = {
+			.name = "usb30_sec_gdsc",
+		},
+		.pwrsts = PWRSTS_OFF_ON,
+		.flags = POLL_CFG_GDSCR,
+};
+
 static struct clk_regmap *gcc_sm8150_clocks[] = {
 	[GCC_AGGRE_NOC_PCIE_TBU_CLK] = &gcc_aggre_noc_pcie_tbu_clk.clkr,
 	[GCC_AGGRE_UFS_CARD_AXI_CLK] = &gcc_aggre_ufs_card_axi_clk.clkr,
@@ -3480,10 +3523,12 @@ static struct clk_regmap *gcc_sm8150_clocks[] = {
 	[GCC_USB3_PRIM_PHY_AUX_CLK] = &gcc_usb3_prim_phy_aux_clk.clkr,
 	[GCC_USB3_PRIM_PHY_AUX_CLK_SRC] = &gcc_usb3_prim_phy_aux_clk_src.clkr,
 	[GCC_USB3_PRIM_PHY_COM_AUX_CLK] = &gcc_usb3_prim_phy_com_aux_clk.clkr,
+	[GCC_USB3_PRIM_PHY_PIPE_CLK] = &gcc_usb3_prim_phy_pipe_clk.clkr,
 	[GCC_USB3_SEC_CLKREF_CLK] = &gcc_usb3_sec_clkref_clk.clkr,
 	[GCC_USB3_SEC_PHY_AUX_CLK] = &gcc_usb3_sec_phy_aux_clk.clkr,
 	[GCC_USB3_SEC_PHY_AUX_CLK_SRC] = &gcc_usb3_sec_phy_aux_clk_src.clkr,
 	[GCC_USB3_SEC_PHY_COM_AUX_CLK] = &gcc_usb3_sec_phy_com_aux_clk.clkr,
+	[GCC_USB3_SEC_PHY_PIPE_CLK] = &gcc_usb3_sec_phy_pipe_clk.clkr,
 	[GCC_VIDEO_AHB_CLK] = &gcc_video_ahb_clk.clkr,
 	[GCC_VIDEO_AXI0_CLK] = &gcc_video_axi0_clk.clkr,
 	[GCC_VIDEO_AXI1_CLK] = &gcc_video_axi1_clk.clkr,
@@ -3527,6 +3572,11 @@ static const struct qcom_reset_map gcc_sm8150_resets[] = {
 	[GCC_USB_PHY_CFG_AHB2PHY_BCR] = { 0x6a000 },
 };
 
+static struct gdsc *gcc_sm8150_gdscs[] = {
+	[USB30_PRIM_GDSC] = &usb30_prim_gdsc,
+	[USB30_SEC_GDSC] = &usb30_sec_gdsc,
+};
+
 static const struct regmap_config gcc_sm8150_regmap_config = {
 	.reg_bits	= 32,
 	.reg_stride	= 4,
@@ -3541,6 +3591,8 @@ static const struct qcom_cc_desc gcc_sm8150_desc = {
 	.num_clks = ARRAY_SIZE(gcc_sm8150_clocks),
 	.resets = gcc_sm8150_resets,
 	.num_resets = ARRAY_SIZE(gcc_sm8150_resets),
+	.gdscs = gcc_sm8150_gdscs,
+	.num_gdscs = ARRAY_SIZE(gcc_sm8150_gdscs),
 };
 
 static const struct of_device_id gcc_sm8150_match_table[] = {
diff --git a/drivers/clk/qcom/gcc-sm8250.c b/drivers/clk/qcom/gcc-sm8250.c
new file mode 100644
index 0000000..6cb6617
--- /dev/null
+++ b/drivers/clk/qcom/gcc-sm8250.c
@@ -0,0 +1,3690 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,gcc-sm8250.h>
+
+#include "clk-alpha-pll.h"
+#include "clk-branch.h"
+#include "clk-rcg.h"
+#include "clk-regmap.h"
+#include "clk-regmap-divider.h"
+#include "common.h"
+#include "gdsc.h"
+#include "reset.h"
+
+enum {
+	P_BI_TCXO,
+	P_AUD_REF_CLK,
+	P_CORE_BI_PLL_TEST_SE,
+	P_GPLL0_OUT_EVEN,
+	P_GPLL0_OUT_MAIN,
+	P_GPLL4_OUT_MAIN,
+	P_GPLL9_OUT_MAIN,
+	P_SLEEP_CLK,
+};
+
+static struct clk_alpha_pll gpll0 = {
+	.offset = 0x0,
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID],
+	.clkr = {
+		.enable_reg = 0x52018,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpll0",
+			.parent_data = &(const struct clk_parent_data){
+				.fw_name = "bi_tcxo",
+			},
+			.num_parents = 1,
+			.ops = &clk_alpha_pll_fixed_lucid_ops,
+		},
+	},
+};
+
+static const struct clk_div_table post_div_table_gpll0_out_even[] = {
+	{ 0x1, 2 },
+	{ }
+};
+
+static struct clk_alpha_pll_postdiv gpll0_out_even = {
+	.offset = 0x0,
+	.post_div_shift = 8,
+	.post_div_table = post_div_table_gpll0_out_even,
+	.num_post_div = ARRAY_SIZE(post_div_table_gpll0_out_even),
+	.width = 4,
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID],
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gpll0_out_even",
+		.parent_data = &(const struct clk_parent_data){
+			.hw = &gpll0.clkr.hw,
+		},
+		.num_parents = 1,
+		.ops = &clk_alpha_pll_postdiv_lucid_ops,
+	},
+};
+
+static struct clk_alpha_pll gpll4 = {
+	.offset = 0x76000,
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID],
+	.clkr = {
+		.enable_reg = 0x52018,
+		.enable_mask = BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpll4",
+			.parent_data = &(const struct clk_parent_data){
+				.fw_name = "bi_tcxo",
+			},
+			.num_parents = 1,
+			.ops = &clk_alpha_pll_fixed_lucid_ops,
+		},
+	},
+};
+
+static struct clk_alpha_pll gpll9 = {
+	.offset = 0x1c000,
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID],
+	.clkr = {
+		.enable_reg = 0x52018,
+		.enable_mask = BIT(9),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpll9",
+			.parent_data = &(const struct clk_parent_data){
+				.fw_name = "bi_tcxo",
+			},
+			.num_parents = 1,
+			.ops = &clk_alpha_pll_fixed_lucid_ops,
+		},
+	},
+};
+
+static const struct parent_map gcc_parent_map_0[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_GPLL0_OUT_MAIN, 1 },
+	{ P_GPLL0_OUT_EVEN, 6 },
+};
+
+static const struct clk_parent_data gcc_parent_data_0[] = {
+	{ .fw_name = "bi_tcxo" },
+	{ .hw = &gpll0.clkr.hw },
+	{ .hw = &gpll0_out_even.clkr.hw },
+};
+
+static const struct clk_parent_data gcc_parent_data_0_ao[] = {
+	{ .fw_name = "bi_tcxo_ao" },
+	{ .hw = &gpll0.clkr.hw },
+	{ .hw = &gpll0_out_even.clkr.hw },
+};
+
+static const struct parent_map gcc_parent_map_1[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_GPLL0_OUT_MAIN, 1 },
+	{ P_SLEEP_CLK, 5 },
+	{ P_GPLL0_OUT_EVEN, 6 },
+};
+
+static const struct clk_parent_data gcc_parent_data_1[] = {
+	{ .fw_name = "bi_tcxo" },
+	{ .hw = &gpll0.clkr.hw },
+	{ .fw_name = "sleep_clk" },
+	{ .hw = &gpll0_out_even.clkr.hw },
+};
+
+static const struct parent_map gcc_parent_map_2[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_SLEEP_CLK, 5 },
+};
+
+static const struct clk_parent_data gcc_parent_data_2[] = {
+	{ .fw_name = "bi_tcxo" },
+	{ .fw_name = "sleep_clk" },
+};
+
+static const struct parent_map gcc_parent_map_3[] = {
+	{ P_BI_TCXO, 0 },
+};
+
+static const struct clk_parent_data gcc_parent_data_3[] = {
+	{ .fw_name = "bi_tcxo" },
+};
+
+static const struct parent_map gcc_parent_map_4[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_GPLL0_OUT_MAIN, 1 },
+	{ P_GPLL9_OUT_MAIN, 2 },
+	{ P_GPLL4_OUT_MAIN, 5 },
+	{ P_GPLL0_OUT_EVEN, 6 },
+};
+
+static const struct clk_parent_data gcc_parent_data_4[] = {
+	{ .fw_name = "bi_tcxo" },
+	{ .hw = &gpll0.clkr.hw },
+	{ .hw = &gpll9.clkr.hw },
+	{ .hw = &gpll4.clkr.hw },
+	{ .hw = &gpll0_out_even.clkr.hw },
+};
+
+static const struct parent_map gcc_parent_map_5[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_GPLL0_OUT_MAIN, 1 },
+	{ P_AUD_REF_CLK, 2 },
+	{ P_GPLL0_OUT_EVEN, 6 },
+};
+
+static const struct clk_parent_data gcc_parent_data_5[] = {
+	{ .fw_name = "bi_tcxo" },
+	{ .hw = &gpll0.clkr.hw },
+	{ .fw_name = "aud_ref_clk" },
+	{ .hw = &gpll0_out_even.clkr.hw },
+};
+
+static const struct freq_tbl ftbl_gcc_cpuss_ahb_clk_src[] = {
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 gcc_cpuss_ahb_clk_src = {
+	.cmd_rcgr = 0x48010,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_cpuss_ahb_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_cpuss_ahb_clk_src",
+		.parent_data = gcc_parent_data_0_ao,
+		.num_parents = 3,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_gcc_gp1_clk_src[] = {
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	F(25000000, P_GPLL0_OUT_EVEN, 12, 0, 0),
+	F(50000000, P_GPLL0_OUT_EVEN, 6, 0, 0),
+	F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0),
+	F(200000000, P_GPLL0_OUT_MAIN, 3, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 gcc_gp1_clk_src = {
+	.cmd_rcgr = 0x64004,
+	.mnd_width = 8,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_1,
+	.freq_tbl = ftbl_gcc_gp1_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_gp1_clk_src",
+		.parent_data = gcc_parent_data_1,
+		.num_parents = 4,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_rcg2 gcc_gp2_clk_src = {
+	.cmd_rcgr = 0x65004,
+	.mnd_width = 8,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_1,
+	.freq_tbl = ftbl_gcc_gp1_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_gp2_clk_src",
+		.parent_data = gcc_parent_data_1,
+		.num_parents = 4,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_rcg2 gcc_gp3_clk_src = {
+	.cmd_rcgr = 0x66004,
+	.mnd_width = 8,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_1,
+	.freq_tbl = ftbl_gcc_gp1_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_gp3_clk_src",
+		.parent_data = gcc_parent_data_1,
+		.num_parents = 4,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_gcc_pcie_0_aux_clk_src[] = {
+	F(9600000, P_BI_TCXO, 2, 0, 0),
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 gcc_pcie_0_aux_clk_src = {
+	.cmd_rcgr = 0x6b038,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_2,
+	.freq_tbl = ftbl_gcc_pcie_0_aux_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_pcie_0_aux_clk_src",
+		.parent_data = gcc_parent_data_2,
+		.num_parents = 2,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_rcg2 gcc_pcie_1_aux_clk_src = {
+	.cmd_rcgr = 0x8d038,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_2,
+	.freq_tbl = ftbl_gcc_pcie_0_aux_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_pcie_1_aux_clk_src",
+		.parent_data = gcc_parent_data_2,
+		.num_parents = 2,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_rcg2 gcc_pcie_2_aux_clk_src = {
+	.cmd_rcgr = 0x6038,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_2,
+	.freq_tbl = ftbl_gcc_pcie_0_aux_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_pcie_2_aux_clk_src",
+		.parent_data = gcc_parent_data_2,
+		.num_parents = 2,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_gcc_pcie_phy_refgen_clk_src[] = {
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 gcc_pcie_phy_refgen_clk_src = {
+	.cmd_rcgr = 0x6f014,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_pcie_phy_refgen_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_pcie_phy_refgen_clk_src",
+		.parent_data = gcc_parent_data_0_ao,
+		.num_parents = 3,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_gcc_pdm2_clk_src[] = {
+	F(9600000, P_BI_TCXO, 2, 0, 0),
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	F(60000000, P_GPLL0_OUT_MAIN, 10, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 gcc_pdm2_clk_src = {
+	.cmd_rcgr = 0x33010,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_pdm2_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_pdm2_clk_src",
+		.parent_data = gcc_parent_data_0,
+		.num_parents = 3,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_gcc_qupv3_wrap0_s0_clk_src[] = {
+	F(7372800, P_GPLL0_OUT_EVEN, 1, 384, 15625),
+	F(14745600, P_GPLL0_OUT_EVEN, 1, 768, 15625),
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	F(29491200, P_GPLL0_OUT_EVEN, 1, 1536, 15625),
+	F(32000000, P_GPLL0_OUT_EVEN, 1, 8, 75),
+	F(48000000, P_GPLL0_OUT_EVEN, 1, 4, 25),
+	F(50000000, P_GPLL0_OUT_EVEN, 6, 0, 0),
+	F(64000000, P_GPLL0_OUT_EVEN, 1, 16, 75),
+	F(75000000, P_GPLL0_OUT_EVEN, 4, 0, 0),
+	F(80000000, P_GPLL0_OUT_EVEN, 1, 4, 15),
+	F(96000000, P_GPLL0_OUT_EVEN, 1, 8, 25),
+	F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0),
+	F(102400000, P_GPLL0_OUT_EVEN, 1, 128, 375),
+	F(112000000, P_GPLL0_OUT_EVEN, 1, 28, 75),
+	F(117964800, P_GPLL0_OUT_EVEN, 1, 6144, 15625),
+	F(120000000, P_GPLL0_OUT_EVEN, 2.5, 0, 0),
+	{ }
+};
+
+static struct clk_init_data gcc_qupv3_wrap0_s0_clk_src_init = {
+	.name = "gcc_qupv3_wrap0_s0_clk_src",
+	.parent_data = gcc_parent_data_0,
+	.num_parents = 3,
+	.ops = &clk_rcg2_ops,
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap0_s0_clk_src = {
+	.cmd_rcgr = 0x17010,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src,
+	.clkr.hw.init = &gcc_qupv3_wrap0_s0_clk_src_init,
+};
+
+static struct clk_init_data gcc_qupv3_wrap0_s1_clk_src_init = {
+	.name = "gcc_qupv3_wrap0_s1_clk_src",
+	.parent_data = gcc_parent_data_0,
+	.num_parents = 3,
+	.ops = &clk_rcg2_ops,
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap0_s1_clk_src = {
+	.cmd_rcgr = 0x17140,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src,
+	.clkr.hw.init = &gcc_qupv3_wrap0_s1_clk_src_init,
+};
+
+static const struct freq_tbl ftbl_gcc_qupv3_wrap0_s2_clk_src[] = {
+	F(7372800, P_GPLL0_OUT_EVEN, 1, 384, 15625),
+	F(14745600, P_GPLL0_OUT_EVEN, 1, 768, 15625),
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	F(29491200, P_GPLL0_OUT_EVEN, 1, 1536, 15625),
+	F(32000000, P_GPLL0_OUT_EVEN, 1, 8, 75),
+	F(48000000, P_GPLL0_OUT_EVEN, 1, 4, 25),
+	F(50000000, P_GPLL0_OUT_EVEN, 6, 0, 0),
+	F(64000000, P_GPLL0_OUT_EVEN, 1, 16, 75),
+	F(75000000, P_GPLL0_OUT_EVEN, 4, 0, 0),
+	F(80000000, P_GPLL0_OUT_EVEN, 1, 4, 15),
+	F(96000000, P_GPLL0_OUT_EVEN, 1, 8, 25),
+	F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0),
+	{ }
+};
+
+static struct clk_init_data gcc_qupv3_wrap0_s2_clk_src_init = {
+	.name = "gcc_qupv3_wrap0_s2_clk_src",
+	.parent_data = gcc_parent_data_0,
+	.num_parents = 3,
+	.ops = &clk_rcg2_ops,
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap0_s2_clk_src = {
+	.cmd_rcgr = 0x17270,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_qupv3_wrap0_s2_clk_src,
+	.clkr.hw.init = &gcc_qupv3_wrap0_s2_clk_src_init,
+};
+
+static struct clk_init_data gcc_qupv3_wrap0_s3_clk_src_init = {
+	.name = "gcc_qupv3_wrap0_s3_clk_src",
+	.parent_data = gcc_parent_data_0,
+	.num_parents = 3,
+	.ops = &clk_rcg2_ops,
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap0_s3_clk_src = {
+	.cmd_rcgr = 0x173a0,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_qupv3_wrap0_s2_clk_src,
+	.clkr.hw.init = &gcc_qupv3_wrap0_s3_clk_src_init,
+};
+
+static struct clk_init_data gcc_qupv3_wrap0_s4_clk_src_init = {
+	.name = "gcc_qupv3_wrap0_s4_clk_src",
+	.parent_data = gcc_parent_data_0,
+	.num_parents = 3,
+	.ops = &clk_rcg2_ops,
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap0_s4_clk_src = {
+	.cmd_rcgr = 0x174d0,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_qupv3_wrap0_s2_clk_src,
+	.clkr.hw.init = &gcc_qupv3_wrap0_s4_clk_src_init,
+};
+
+static struct clk_init_data gcc_qupv3_wrap0_s5_clk_src_init = {
+	.name = "gcc_qupv3_wrap0_s5_clk_src",
+	.parent_data = gcc_parent_data_0,
+	.num_parents = 3,
+	.ops = &clk_rcg2_ops,
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap0_s5_clk_src = {
+	.cmd_rcgr = 0x17600,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_qupv3_wrap0_s2_clk_src,
+	.clkr.hw.init = &gcc_qupv3_wrap0_s5_clk_src_init,
+};
+
+static struct clk_init_data gcc_qupv3_wrap0_s6_clk_src_init = {
+	.name = "gcc_qupv3_wrap0_s6_clk_src",
+	.parent_data = gcc_parent_data_0,
+	.num_parents = 3,
+	.ops = &clk_rcg2_ops,
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap0_s6_clk_src = {
+	.cmd_rcgr = 0x17730,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_qupv3_wrap0_s2_clk_src,
+	.clkr.hw.init = &gcc_qupv3_wrap0_s6_clk_src_init,
+};
+
+static struct clk_init_data gcc_qupv3_wrap0_s7_clk_src_init = {
+	.name = "gcc_qupv3_wrap0_s7_clk_src",
+	.parent_data = gcc_parent_data_0,
+	.num_parents = 3,
+	.ops = &clk_rcg2_ops,
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap0_s7_clk_src = {
+	.cmd_rcgr = 0x17860,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_qupv3_wrap0_s2_clk_src,
+	.clkr.hw.init = &gcc_qupv3_wrap0_s7_clk_src_init,
+};
+
+static struct clk_init_data gcc_qupv3_wrap1_s0_clk_src_init = {
+	.name = "gcc_qupv3_wrap1_s0_clk_src",
+	.parent_data = gcc_parent_data_0,
+	.num_parents = 3,
+	.ops = &clk_rcg2_ops,
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap1_s0_clk_src = {
+	.cmd_rcgr = 0x18010,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src,
+	.clkr.hw.init = &gcc_qupv3_wrap1_s0_clk_src_init,
+};
+
+static struct clk_init_data gcc_qupv3_wrap1_s1_clk_src_init = {
+	.name = "gcc_qupv3_wrap1_s1_clk_src",
+	.parent_data = gcc_parent_data_0,
+	.num_parents = 3,
+	.ops = &clk_rcg2_ops,
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap1_s1_clk_src = {
+	.cmd_rcgr = 0x18140,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_qupv3_wrap0_s2_clk_src,
+	.clkr.hw.init = &gcc_qupv3_wrap1_s1_clk_src_init,
+};
+
+static struct clk_init_data gcc_qupv3_wrap1_s2_clk_src_init = {
+	.name = "gcc_qupv3_wrap1_s2_clk_src",
+	.parent_data = gcc_parent_data_0,
+	.num_parents = 3,
+	.ops = &clk_rcg2_ops,
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap1_s2_clk_src = {
+	.cmd_rcgr = 0x18270,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_qupv3_wrap0_s2_clk_src,
+	.clkr.hw.init = &gcc_qupv3_wrap1_s2_clk_src_init,
+};
+
+static struct clk_init_data gcc_qupv3_wrap1_s3_clk_src_init = {
+	.name = "gcc_qupv3_wrap1_s3_clk_src",
+	.parent_data = gcc_parent_data_0,
+	.num_parents = 3,
+	.ops = &clk_rcg2_ops,
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap1_s3_clk_src = {
+	.cmd_rcgr = 0x183a0,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_qupv3_wrap0_s2_clk_src,
+	.clkr.hw.init = &gcc_qupv3_wrap1_s3_clk_src_init,
+};
+
+static struct clk_init_data gcc_qupv3_wrap1_s4_clk_src_init = {
+	.name = "gcc_qupv3_wrap1_s4_clk_src",
+	.parent_data = gcc_parent_data_0,
+	.num_parents = 3,
+	.ops = &clk_rcg2_ops,
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap1_s4_clk_src = {
+	.cmd_rcgr = 0x184d0,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_qupv3_wrap0_s2_clk_src,
+	.clkr.hw.init = &gcc_qupv3_wrap1_s4_clk_src_init,
+};
+
+static struct clk_init_data gcc_qupv3_wrap1_s5_clk_src_init = {
+	.name = "gcc_qupv3_wrap1_s5_clk_src",
+	.parent_data = gcc_parent_data_0,
+	.num_parents = 3,
+	.ops = &clk_rcg2_ops,
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap1_s5_clk_src = {
+	.cmd_rcgr = 0x18600,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_qupv3_wrap0_s2_clk_src,
+	.clkr.hw.init = &gcc_qupv3_wrap1_s5_clk_src_init,
+};
+
+static struct clk_init_data gcc_qupv3_wrap2_s0_clk_src_init = {
+	.name = "gcc_qupv3_wrap2_s0_clk_src",
+	.parent_data = gcc_parent_data_0,
+	.num_parents = 3,
+	.ops = &clk_rcg2_ops,
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap2_s0_clk_src = {
+	.cmd_rcgr = 0x1e010,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src,
+	.clkr.hw.init = &gcc_qupv3_wrap2_s0_clk_src_init,
+};
+
+static struct clk_init_data gcc_qupv3_wrap2_s1_clk_src_init = {
+	.name = "gcc_qupv3_wrap2_s1_clk_src",
+	.parent_data = gcc_parent_data_0,
+	.num_parents = 3,
+	.ops = &clk_rcg2_ops,
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap2_s1_clk_src = {
+	.cmd_rcgr = 0x1e140,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_qupv3_wrap0_s2_clk_src,
+	.clkr.hw.init = &gcc_qupv3_wrap2_s1_clk_src_init,
+};
+
+static struct clk_init_data gcc_qupv3_wrap2_s2_clk_src_init = {
+	.name = "gcc_qupv3_wrap2_s2_clk_src",
+	.parent_data = gcc_parent_data_0,
+	.num_parents = 3,
+	.ops = &clk_rcg2_ops,
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap2_s2_clk_src = {
+	.cmd_rcgr = 0x1e270,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_qupv3_wrap0_s2_clk_src,
+	.clkr.hw.init = &gcc_qupv3_wrap2_s2_clk_src_init,
+};
+
+static struct clk_init_data gcc_qupv3_wrap2_s3_clk_src_init = {
+	.name = "gcc_qupv3_wrap2_s3_clk_src",
+	.parent_data = gcc_parent_data_0,
+	.num_parents = 3,
+	.ops = &clk_rcg2_ops,
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap2_s3_clk_src = {
+	.cmd_rcgr = 0x1e3a0,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_qupv3_wrap0_s2_clk_src,
+	.clkr.hw.init = &gcc_qupv3_wrap2_s3_clk_src_init,
+};
+
+static struct clk_init_data gcc_qupv3_wrap2_s4_clk_src_init = {
+	.name = "gcc_qupv3_wrap2_s4_clk_src",
+	.parent_data = gcc_parent_data_0,
+	.num_parents = 3,
+	.ops = &clk_rcg2_ops,
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap2_s4_clk_src = {
+	.cmd_rcgr = 0x1e4d0,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_qupv3_wrap0_s2_clk_src,
+	.clkr.hw.init = &gcc_qupv3_wrap2_s4_clk_src_init,
+};
+
+static struct clk_init_data gcc_qupv3_wrap2_s5_clk_src_init = {
+	.name = "gcc_qupv3_wrap2_s5_clk_src",
+	.parent_data = gcc_parent_data_0,
+	.num_parents = 3,
+	.ops = &clk_rcg2_ops,
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap2_s5_clk_src = {
+	.cmd_rcgr = 0x1e600,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_qupv3_wrap0_s2_clk_src,
+	.clkr.hw.init = &gcc_qupv3_wrap2_s5_clk_src_init,
+};
+
+static const struct freq_tbl ftbl_gcc_sdcc2_apps_clk_src[] = {
+	F(400000, P_BI_TCXO, 12, 1, 4),
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	F(25000000, P_GPLL0_OUT_EVEN, 12, 0, 0),
+	F(50000000, P_GPLL0_OUT_EVEN, 6, 0, 0),
+	F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0),
+	F(202000000, P_GPLL9_OUT_MAIN, 4, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 gcc_sdcc2_apps_clk_src = {
+	.cmd_rcgr = 0x1400c,
+	.mnd_width = 8,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_4,
+	.freq_tbl = ftbl_gcc_sdcc2_apps_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_sdcc2_apps_clk_src",
+		.parent_data = gcc_parent_data_4,
+		.num_parents = 5,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_gcc_sdcc4_apps_clk_src[] = {
+	F(400000, P_BI_TCXO, 12, 1, 4),
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	F(25000000, P_GPLL0_OUT_EVEN, 12, 0, 0),
+	F(50000000, P_GPLL0_OUT_EVEN, 6, 0, 0),
+	F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 gcc_sdcc4_apps_clk_src = {
+	.cmd_rcgr = 0x1600c,
+	.mnd_width = 8,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_sdcc4_apps_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_sdcc4_apps_clk_src",
+		.parent_data = gcc_parent_data_0,
+		.num_parents = 3,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_gcc_tsif_ref_clk_src[] = {
+	F(105495, P_BI_TCXO, 2, 1, 91),
+	{ }
+};
+
+static struct clk_rcg2 gcc_tsif_ref_clk_src = {
+	.cmd_rcgr = 0x36010,
+	.mnd_width = 8,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_5,
+	.freq_tbl = ftbl_gcc_tsif_ref_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_tsif_ref_clk_src",
+		.parent_data = gcc_parent_data_5,
+		.num_parents = 4,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_gcc_ufs_card_axi_clk_src[] = {
+	F(25000000, P_GPLL0_OUT_EVEN, 12, 0, 0),
+	F(50000000, P_GPLL0_OUT_EVEN, 6, 0, 0),
+	F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0),
+	F(200000000, P_GPLL0_OUT_MAIN, 3, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 gcc_ufs_card_axi_clk_src = {
+	.cmd_rcgr = 0x75024,
+	.mnd_width = 8,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_ufs_card_axi_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_ufs_card_axi_clk_src",
+		.parent_data = gcc_parent_data_0,
+		.num_parents = 3,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_gcc_ufs_card_ice_core_clk_src[] = {
+	F(37500000, P_GPLL0_OUT_EVEN, 8, 0, 0),
+	F(75000000, P_GPLL0_OUT_EVEN, 4, 0, 0),
+	F(150000000, P_GPLL0_OUT_MAIN, 4, 0, 0),
+	F(300000000, P_GPLL0_OUT_MAIN, 2, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 gcc_ufs_card_ice_core_clk_src = {
+	.cmd_rcgr = 0x7506c,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_ufs_card_ice_core_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_ufs_card_ice_core_clk_src",
+		.parent_data = gcc_parent_data_0,
+		.num_parents = 3,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_gcc_ufs_card_phy_aux_clk_src[] = {
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 gcc_ufs_card_phy_aux_clk_src = {
+	.cmd_rcgr = 0x750a0,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_3,
+	.freq_tbl = ftbl_gcc_ufs_card_phy_aux_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_ufs_card_phy_aux_clk_src",
+		.parent_data = gcc_parent_data_3,
+		.num_parents = 1,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_gcc_ufs_card_unipro_core_clk_src[] = {
+	F(37500000, P_GPLL0_OUT_EVEN, 8, 0, 0),
+	F(75000000, P_GPLL0_OUT_MAIN, 8, 0, 0),
+	F(150000000, P_GPLL0_OUT_MAIN, 4, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 gcc_ufs_card_unipro_core_clk_src = {
+	.cmd_rcgr = 0x75084,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_ufs_card_unipro_core_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_ufs_card_unipro_core_clk_src",
+		.parent_data = gcc_parent_data_0,
+		.num_parents = 3,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_gcc_ufs_phy_axi_clk_src[] = {
+	F(25000000, P_GPLL0_OUT_EVEN, 12, 0, 0),
+	F(37500000, P_GPLL0_OUT_EVEN, 8, 0, 0),
+	F(75000000, P_GPLL0_OUT_EVEN, 4, 0, 0),
+	F(150000000, P_GPLL0_OUT_MAIN, 4, 0, 0),
+	F(300000000, P_GPLL0_OUT_MAIN, 2, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 gcc_ufs_phy_axi_clk_src = {
+	.cmd_rcgr = 0x77024,
+	.mnd_width = 8,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_ufs_phy_axi_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_ufs_phy_axi_clk_src",
+		.parent_data = gcc_parent_data_0,
+		.num_parents = 3,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_rcg2 gcc_ufs_phy_ice_core_clk_src = {
+	.cmd_rcgr = 0x7706c,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_ufs_card_ice_core_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_ufs_phy_ice_core_clk_src",
+		.parent_data = gcc_parent_data_0,
+		.num_parents = 3,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_rcg2 gcc_ufs_phy_phy_aux_clk_src = {
+	.cmd_rcgr = 0x770a0,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_3,
+	.freq_tbl = ftbl_gcc_pcie_0_aux_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_ufs_phy_phy_aux_clk_src",
+		.parent_data = gcc_parent_data_3,
+		.num_parents = 1,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_rcg2 gcc_ufs_phy_unipro_core_clk_src = {
+	.cmd_rcgr = 0x77084,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_ufs_card_ice_core_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_ufs_phy_unipro_core_clk_src",
+		.parent_data = gcc_parent_data_0,
+		.num_parents = 3,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_gcc_usb30_prim_master_clk_src[] = {
+	F(33333333, P_GPLL0_OUT_EVEN, 9, 0, 0),
+	F(66666667, P_GPLL0_OUT_EVEN, 4.5, 0, 0),
+	F(133333333, P_GPLL0_OUT_MAIN, 4.5, 0, 0),
+	F(200000000, P_GPLL0_OUT_MAIN, 3, 0, 0),
+	F(240000000, P_GPLL0_OUT_MAIN, 2.5, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 gcc_usb30_prim_master_clk_src = {
+	.cmd_rcgr = 0xf020,
+	.mnd_width = 8,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_usb30_prim_master_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_usb30_prim_master_clk_src",
+		.parent_data = gcc_parent_data_0,
+		.num_parents = 3,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_rcg2 gcc_usb30_prim_mock_utmi_clk_src = {
+	.cmd_rcgr = 0xf038,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_ufs_card_phy_aux_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_usb30_prim_mock_utmi_clk_src",
+		.parent_data = gcc_parent_data_0,
+		.num_parents = 3,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_rcg2 gcc_usb30_sec_master_clk_src = {
+	.cmd_rcgr = 0x10020,
+	.mnd_width = 8,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_usb30_prim_master_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_usb30_sec_master_clk_src",
+		.parent_data = gcc_parent_data_0,
+		.num_parents = 3,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_rcg2 gcc_usb30_sec_mock_utmi_clk_src = {
+	.cmd_rcgr = 0x10038,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_ufs_card_phy_aux_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_usb30_sec_mock_utmi_clk_src",
+		.parent_data = gcc_parent_data_0,
+		.num_parents = 3,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_rcg2 gcc_usb3_prim_phy_aux_clk_src = {
+	.cmd_rcgr = 0xf064,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_2,
+	.freq_tbl = ftbl_gcc_ufs_card_phy_aux_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_usb3_prim_phy_aux_clk_src",
+		.parent_data = gcc_parent_data_2,
+		.num_parents = 2,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_rcg2 gcc_usb3_sec_phy_aux_clk_src = {
+	.cmd_rcgr = 0x10064,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_2,
+	.freq_tbl = ftbl_gcc_ufs_card_phy_aux_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_usb3_sec_phy_aux_clk_src",
+		.parent_data = gcc_parent_data_2,
+		.num_parents = 2,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_regmap_div gcc_cpuss_ahb_postdiv_clk_src = {
+	.reg = 0x48028,
+	.shift = 0,
+	.width = 4,
+	.clkr.hw.init = &(struct clk_init_data) {
+		.name = "gcc_cpuss_ahb_postdiv_clk_src",
+		.parent_data = &(const struct clk_parent_data){
+			.hw = &gcc_cpuss_ahb_clk_src.clkr.hw,
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_regmap_div_ro_ops,
+	},
+};
+
+static struct clk_regmap_div gcc_usb30_prim_mock_utmi_postdiv_clk_src = {
+	.reg = 0xf050,
+	.shift = 0,
+	.width = 2,
+	.clkr.hw.init = &(struct clk_init_data) {
+		.name = "gcc_usb30_prim_mock_utmi_postdiv_clk_src",
+		.parent_data = &(const struct clk_parent_data){
+			.hw = &gcc_usb30_prim_mock_utmi_clk_src.clkr.hw,
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_regmap_div_ro_ops,
+	},
+};
+
+static struct clk_regmap_div gcc_usb30_sec_mock_utmi_postdiv_clk_src = {
+	.reg = 0x10050,
+	.shift = 0,
+	.width = 2,
+	.clkr.hw.init = &(struct clk_init_data) {
+		.name = "gcc_usb30_sec_mock_utmi_postdiv_clk_src",
+		.parent_data = &(const struct clk_parent_data){
+			.hw = &gcc_usb30_sec_mock_utmi_clk_src.clkr.hw,
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_regmap_div_ro_ops,
+	},
+};
+
+static struct clk_branch gcc_aggre_noc_pcie_tbu_clk = {
+	.halt_reg = 0x9000c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x9000c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_aggre_noc_pcie_tbu_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_aggre_ufs_card_axi_clk = {
+	.halt_reg = 0x750cc,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0x750cc,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x750cc,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_aggre_ufs_card_axi_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_ufs_card_axi_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_aggre_ufs_phy_axi_clk = {
+	.halt_reg = 0x770cc,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0x770cc,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x770cc,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_aggre_ufs_phy_axi_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_ufs_phy_axi_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_aggre_usb3_prim_axi_clk = {
+	.halt_reg = 0xf080,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0xf080,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_aggre_usb3_prim_axi_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_usb30_prim_master_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_aggre_usb3_sec_axi_clk = {
+	.halt_reg = 0x10080,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x10080,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_aggre_usb3_sec_axi_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_usb30_sec_master_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_boot_rom_ahb_clk = {
+	.halt_reg = 0x38004,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0x38004,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x52000,
+		.enable_mask = BIT(10),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_boot_rom_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_camera_hf_axi_clk = {
+	.halt_reg = 0xb02c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0xb02c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_camera_hf_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_camera_sf_axi_clk = {
+	.halt_reg = 0xb030,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0xb030,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_camera_sf_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_camera_xo_clk = {
+	.halt_reg = 0xb040,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0xb040,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_camera_xo_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_cfg_noc_usb3_prim_axi_clk = {
+	.halt_reg = 0xf07c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0xf07c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_cfg_noc_usb3_prim_axi_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_usb30_prim_master_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_cfg_noc_usb3_sec_axi_clk = {
+	.halt_reg = 0x1007c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x1007c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_cfg_noc_usb3_sec_axi_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_usb30_sec_master_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_cpuss_ahb_clk = {
+	.halt_reg = 0x48000,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52000,
+		.enable_mask = BIT(21),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_cpuss_ahb_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_cpuss_ahb_postdiv_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_cpuss_rbcpr_clk = {
+	.halt_reg = 0x48004,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x48004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_cpuss_rbcpr_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_ddrss_gpu_axi_clk = {
+	.halt_reg = 0x71154,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x71154,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_ddrss_gpu_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_ddrss_pcie_sf_tbu_clk = {
+	.halt_reg = 0x8d058,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x8d058,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_ddrss_pcie_sf_tbu_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_disp_hf_axi_clk = {
+	.halt_reg = 0xb034,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0xb034,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_disp_hf_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_disp_sf_axi_clk = {
+	.halt_reg = 0xb038,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0xb038,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_disp_sf_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_disp_xo_clk = {
+	.halt_reg = 0xb044,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0xb044,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_disp_xo_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_gp1_clk = {
+	.halt_reg = 0x64000,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x64000,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_gp1_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_gp1_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_gp2_clk = {
+	.halt_reg = 0x65000,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x65000,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_gp2_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_gp2_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_gp3_clk = {
+	.halt_reg = 0x66000,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x66000,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_gp3_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_gp3_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_gpu_gpll0_clk_src = {
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x52000,
+		.enable_mask = BIT(15),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_gpu_gpll0_clk_src",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gpll0.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_gpu_gpll0_div_clk_src = {
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x52000,
+		.enable_mask = BIT(16),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_gpu_gpll0_div_clk_src",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gpll0_out_even.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_gpu_iref_en = {
+	.halt_reg = 0x8c014,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x8c014,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_gpu_iref_en",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_gpu_memnoc_gfx_clk = {
+	.halt_reg = 0x7100c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x7100c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_gpu_memnoc_gfx_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_gpu_snoc_dvm_gfx_clk = {
+	.halt_reg = 0x71018,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x71018,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_gpu_snoc_dvm_gfx_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_npu_axi_clk = {
+	.halt_reg = 0x4d008,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x4d008,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_npu_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_npu_bwmon_axi_clk = {
+	.halt_reg = 0x73008,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x73008,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_npu_bwmon_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_npu_bwmon_cfg_ahb_clk = {
+	.halt_reg = 0x73004,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x73004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_npu_bwmon_cfg_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_npu_cfg_ahb_clk = {
+	.halt_reg = 0x4d004,
+	.halt_check = BRANCH_HALT,
+	.hwcg_reg = 0x4d004,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x4d004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_npu_cfg_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_npu_dma_clk = {
+	.halt_reg = 0x4d00c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x4d00c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_npu_dma_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_npu_gpll0_clk_src = {
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x52000,
+		.enable_mask = BIT(18),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_npu_gpll0_clk_src",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gpll0.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_npu_gpll0_div_clk_src = {
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x52000,
+		.enable_mask = BIT(19),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_npu_gpll0_div_clk_src",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gpll0_out_even.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie0_phy_refgen_clk = {
+	.halt_reg = 0x6f02c,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x6f02c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie0_phy_refgen_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_pcie_phy_refgen_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie1_phy_refgen_clk = {
+	.halt_reg = 0x6f030,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x6f030,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie1_phy_refgen_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_pcie_phy_refgen_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie2_phy_refgen_clk = {
+	.halt_reg = 0x6f034,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x6f034,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie2_phy_refgen_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_pcie_phy_refgen_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_0_aux_clk = {
+	.halt_reg = 0x6b028,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(3),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_0_aux_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_pcie_0_aux_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_0_cfg_ahb_clk = {
+	.halt_reg = 0x6b024,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0x6b024,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(2),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_0_cfg_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_0_mstr_axi_clk = {
+	.halt_reg = 0x6b01c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(1),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_0_mstr_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_0_pipe_clk = {
+	.halt_reg = 0x6b02c,
+	.halt_check = BRANCH_HALT_SKIP,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_0_pipe_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_0_slv_axi_clk = {
+	.halt_reg = 0x6b014,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0x6b014,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_0_slv_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_0_slv_q2a_axi_clk = {
+	.halt_reg = 0x6b010,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(5),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_0_slv_q2a_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_1_aux_clk = {
+	.halt_reg = 0x8d028,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52000,
+		.enable_mask = BIT(29),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_1_aux_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_pcie_1_aux_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_1_cfg_ahb_clk = {
+	.halt_reg = 0x8d024,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0x8d024,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x52000,
+		.enable_mask = BIT(28),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_1_cfg_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_1_mstr_axi_clk = {
+	.halt_reg = 0x8d01c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52000,
+		.enable_mask = BIT(27),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_1_mstr_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_1_pipe_clk = {
+	.halt_reg = 0x8d02c,
+	.halt_check = BRANCH_HALT_SKIP,
+	.clkr = {
+		.enable_reg = 0x52000,
+		.enable_mask = BIT(30),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_1_pipe_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_1_slv_axi_clk = {
+	.halt_reg = 0x8d014,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0x8d014,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x52000,
+		.enable_mask = BIT(26),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_1_slv_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_1_slv_q2a_axi_clk = {
+	.halt_reg = 0x8d010,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52000,
+		.enable_mask = BIT(25),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_1_slv_q2a_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_2_aux_clk = {
+	.halt_reg = 0x6028,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52010,
+		.enable_mask = BIT(14),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_2_aux_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_pcie_2_aux_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_2_cfg_ahb_clk = {
+	.halt_reg = 0x6024,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0x6024,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x52010,
+		.enable_mask = BIT(13),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_2_cfg_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_2_mstr_axi_clk = {
+	.halt_reg = 0x601c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52010,
+		.enable_mask = BIT(12),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_2_mstr_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_2_pipe_clk = {
+	.halt_reg = 0x602c,
+	.halt_check = BRANCH_HALT_SKIP,
+	.clkr = {
+		.enable_reg = 0x52010,
+		.enable_mask = BIT(15),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_2_pipe_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_2_slv_axi_clk = {
+	.halt_reg = 0x6014,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0x6014,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x52010,
+		.enable_mask = BIT(11),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_2_slv_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_2_slv_q2a_axi_clk = {
+	.halt_reg = 0x6010,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52010,
+		.enable_mask = BIT(10),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_2_slv_q2a_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_mdm_clkref_en = {
+	.halt_reg = 0x8c00c,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x8c00c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_mdm_clkref_en",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_phy_aux_clk = {
+	.halt_reg = 0x6f004,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x6f004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_phy_aux_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_pcie_0_aux_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_wifi_clkref_en = {
+	.halt_reg = 0x8c004,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x8c004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_wifi_clkref_en",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_wigig_clkref_en = {
+	.halt_reg = 0x8c008,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x8c008,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_wigig_clkref_en",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pdm2_clk = {
+	.halt_reg = 0x3300c,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x3300c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pdm2_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_pdm2_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pdm_ahb_clk = {
+	.halt_reg = 0x33004,
+	.halt_check = BRANCH_HALT,
+	.hwcg_reg = 0x33004,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x33004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pdm_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pdm_xo4_clk = {
+	.halt_reg = 0x33008,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x33008,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pdm_xo4_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_prng_ahb_clk = {
+	.halt_reg = 0x34004,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52000,
+		.enable_mask = BIT(13),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_prng_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qmip_camera_nrt_ahb_clk = {
+	.halt_reg = 0xb018,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0xb018,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0xb018,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qmip_camera_nrt_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qmip_camera_rt_ahb_clk = {
+	.halt_reg = 0xb01c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0xb01c,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0xb01c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qmip_camera_rt_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qmip_disp_ahb_clk = {
+	.halt_reg = 0xb020,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0xb020,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0xb020,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qmip_disp_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qmip_video_cvp_ahb_clk = {
+	.halt_reg = 0xb010,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0xb010,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0xb010,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qmip_video_cvp_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qmip_video_vcodec_ahb_clk = {
+	.halt_reg = 0xb014,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0xb014,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0xb014,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qmip_video_vcodec_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap0_core_2x_clk = {
+	.halt_reg = 0x23008,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(9),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap0_core_2x_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap0_core_clk = {
+	.halt_reg = 0x23000,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(8),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap0_core_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap0_s0_clk = {
+	.halt_reg = 0x1700c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(10),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap0_s0_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_qupv3_wrap0_s0_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap0_s1_clk = {
+	.halt_reg = 0x1713c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(11),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap0_s1_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_qupv3_wrap0_s1_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap0_s2_clk = {
+	.halt_reg = 0x1726c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(12),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap0_s2_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_qupv3_wrap0_s2_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap0_s3_clk = {
+	.halt_reg = 0x1739c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(13),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap0_s3_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_qupv3_wrap0_s3_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap0_s4_clk = {
+	.halt_reg = 0x174cc,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(14),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap0_s4_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_qupv3_wrap0_s4_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap0_s5_clk = {
+	.halt_reg = 0x175fc,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(15),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap0_s5_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_qupv3_wrap0_s5_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap0_s6_clk = {
+	.halt_reg = 0x1772c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(16),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap0_s6_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_qupv3_wrap0_s6_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap0_s7_clk = {
+	.halt_reg = 0x1785c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(17),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap0_s7_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_qupv3_wrap0_s7_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap1_core_2x_clk = {
+	.halt_reg = 0x23140,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(18),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap1_core_2x_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap1_core_clk = {
+	.halt_reg = 0x23138,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(19),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap1_core_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap1_s0_clk = {
+	.halt_reg = 0x1800c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(22),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap1_s0_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_qupv3_wrap1_s0_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap1_s1_clk = {
+	.halt_reg = 0x1813c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(23),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap1_s1_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_qupv3_wrap1_s1_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap1_s2_clk = {
+	.halt_reg = 0x1826c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(24),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap1_s2_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_qupv3_wrap1_s2_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap1_s3_clk = {
+	.halt_reg = 0x1839c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(25),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap1_s3_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_qupv3_wrap1_s3_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap1_s4_clk = {
+	.halt_reg = 0x184cc,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(26),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap1_s4_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_qupv3_wrap1_s4_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap1_s5_clk = {
+	.halt_reg = 0x185fc,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(27),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap1_s5_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_qupv3_wrap1_s5_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap2_core_2x_clk = {
+	.halt_reg = 0x23278,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52010,
+		.enable_mask = BIT(3),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap2_core_2x_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap2_core_clk = {
+	.halt_reg = 0x23270,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52010,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap2_core_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap2_s0_clk = {
+	.halt_reg = 0x1e00c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52010,
+		.enable_mask = BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap2_s0_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_qupv3_wrap2_s0_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap2_s1_clk = {
+	.halt_reg = 0x1e13c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52010,
+		.enable_mask = BIT(5),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap2_s1_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_qupv3_wrap2_s1_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap2_s2_clk = {
+	.halt_reg = 0x1e26c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52010,
+		.enable_mask = BIT(6),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap2_s2_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_qupv3_wrap2_s2_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap2_s3_clk = {
+	.halt_reg = 0x1e39c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52010,
+		.enable_mask = BIT(7),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap2_s3_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_qupv3_wrap2_s3_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap2_s4_clk = {
+	.halt_reg = 0x1e4cc,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52010,
+		.enable_mask = BIT(8),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap2_s4_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_qupv3_wrap2_s4_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap2_s5_clk = {
+	.halt_reg = 0x1e5fc,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52010,
+		.enable_mask = BIT(9),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap2_s5_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_qupv3_wrap2_s5_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap_0_m_ahb_clk = {
+	.halt_reg = 0x17004,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(6),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap_0_m_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap_0_s_ahb_clk = {
+	.halt_reg = 0x17008,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0x17008,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(7),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap_0_s_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap_1_m_ahb_clk = {
+	.halt_reg = 0x18004,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(20),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap_1_m_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap_1_s_ahb_clk = {
+	.halt_reg = 0x18008,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0x18008,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(21),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap_1_s_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap_2_m_ahb_clk = {
+	.halt_reg = 0x1e004,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52010,
+		.enable_mask = BIT(2),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap_2_m_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap_2_s_ahb_clk = {
+	.halt_reg = 0x1e008,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0x1e008,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x52010,
+		.enable_mask = BIT(1),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap_2_s_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_sdcc2_ahb_clk = {
+	.halt_reg = 0x14008,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x14008,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_sdcc2_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_sdcc2_apps_clk = {
+	.halt_reg = 0x14004,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x14004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_sdcc2_apps_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_sdcc2_apps_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_sdcc4_ahb_clk = {
+	.halt_reg = 0x16008,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x16008,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_sdcc4_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_sdcc4_apps_clk = {
+	.halt_reg = 0x16004,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x16004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_sdcc4_apps_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_sdcc4_apps_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_tsif_ahb_clk = {
+	.halt_reg = 0x36004,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x36004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_tsif_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_tsif_inactivity_timers_clk = {
+	.halt_reg = 0x3600c,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x3600c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_tsif_inactivity_timers_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_tsif_ref_clk = {
+	.halt_reg = 0x36008,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x36008,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_tsif_ref_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_tsif_ref_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_ufs_1x_clkref_en = {
+	.halt_reg = 0x8c000,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x8c000,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_ufs_1x_clkref_en",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_ufs_card_ahb_clk = {
+	.halt_reg = 0x75018,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0x75018,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x75018,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_ufs_card_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_ufs_card_axi_clk = {
+	.halt_reg = 0x75010,
+	.halt_check = BRANCH_HALT,
+	.hwcg_reg = 0x75010,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x75010,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_ufs_card_axi_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_ufs_card_axi_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_ufs_card_ice_core_clk = {
+	.halt_reg = 0x75064,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0x75064,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x75064,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_ufs_card_ice_core_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_ufs_card_ice_core_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_ufs_card_phy_aux_clk = {
+	.halt_reg = 0x7509c,
+	.halt_check = BRANCH_HALT,
+	.hwcg_reg = 0x7509c,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x7509c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_ufs_card_phy_aux_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_ufs_card_phy_aux_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_ufs_card_rx_symbol_0_clk = {
+	.halt_reg = 0x75020,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x75020,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_ufs_card_rx_symbol_0_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_ufs_card_rx_symbol_1_clk = {
+	.halt_reg = 0x750b8,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x750b8,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_ufs_card_rx_symbol_1_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_ufs_card_tx_symbol_0_clk = {
+	.halt_reg = 0x7501c,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x7501c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_ufs_card_tx_symbol_0_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_ufs_card_unipro_core_clk = {
+	.halt_reg = 0x7505c,
+	.halt_check = BRANCH_HALT,
+	.hwcg_reg = 0x7505c,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x7505c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_ufs_card_unipro_core_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_ufs_card_unipro_core_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_ufs_phy_ahb_clk = {
+	.halt_reg = 0x77018,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0x77018,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x77018,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_ufs_phy_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_ufs_phy_axi_clk = {
+	.halt_reg = 0x77010,
+	.halt_check = BRANCH_HALT,
+	.hwcg_reg = 0x77010,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x77010,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_ufs_phy_axi_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_ufs_phy_axi_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_ufs_phy_ice_core_clk = {
+	.halt_reg = 0x77064,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0x77064,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x77064,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_ufs_phy_ice_core_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_ufs_phy_ice_core_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_ufs_phy_phy_aux_clk = {
+	.halt_reg = 0x7709c,
+	.halt_check = BRANCH_HALT,
+	.hwcg_reg = 0x7709c,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x7709c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_ufs_phy_phy_aux_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_ufs_phy_phy_aux_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_ufs_phy_rx_symbol_0_clk = {
+	.halt_reg = 0x77020,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x77020,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_ufs_phy_rx_symbol_0_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_ufs_phy_rx_symbol_1_clk = {
+	.halt_reg = 0x770b8,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x770b8,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_ufs_phy_rx_symbol_1_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_ufs_phy_tx_symbol_0_clk = {
+	.halt_reg = 0x7701c,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x7701c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_ufs_phy_tx_symbol_0_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_ufs_phy_unipro_core_clk = {
+	.halt_reg = 0x7705c,
+	.halt_check = BRANCH_HALT,
+	.hwcg_reg = 0x7705c,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x7705c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_ufs_phy_unipro_core_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_ufs_phy_unipro_core_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_usb30_prim_master_clk = {
+	.halt_reg = 0xf010,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0xf010,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_usb30_prim_master_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_usb30_prim_master_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_usb30_prim_mock_utmi_clk = {
+	.halt_reg = 0xf01c,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0xf01c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_usb30_prim_mock_utmi_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw =
+			&gcc_usb30_prim_mock_utmi_postdiv_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_usb30_prim_sleep_clk = {
+	.halt_reg = 0xf018,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0xf018,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_usb30_prim_sleep_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_usb30_sec_master_clk = {
+	.halt_reg = 0x10010,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x10010,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_usb30_sec_master_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_usb30_sec_master_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_usb30_sec_mock_utmi_clk = {
+	.halt_reg = 0x1001c,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x1001c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_usb30_sec_mock_utmi_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw =
+			&gcc_usb30_sec_mock_utmi_postdiv_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_usb30_sec_sleep_clk = {
+	.halt_reg = 0x10018,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x10018,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_usb30_sec_sleep_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_usb3_prim_phy_aux_clk = {
+	.halt_reg = 0xf054,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0xf054,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_usb3_prim_phy_aux_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_usb3_prim_phy_aux_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_usb3_prim_phy_com_aux_clk = {
+	.halt_reg = 0xf058,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0xf058,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_usb3_prim_phy_com_aux_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_usb3_prim_phy_aux_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_usb3_prim_phy_pipe_clk = {
+	.halt_reg = 0xf05c,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0xf05c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_usb3_prim_phy_pipe_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_usb3_sec_clkref_en = {
+	.halt_reg = 0x8c010,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x8c010,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_usb3_sec_clkref_en",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_usb3_sec_phy_aux_clk = {
+	.halt_reg = 0x10054,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x10054,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_usb3_sec_phy_aux_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_usb3_sec_phy_aux_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_usb3_sec_phy_com_aux_clk = {
+	.halt_reg = 0x10058,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x10058,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_usb3_sec_phy_com_aux_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_usb3_sec_phy_aux_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_usb3_sec_phy_pipe_clk = {
+	.halt_reg = 0x1005c,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x1005c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_usb3_sec_phy_pipe_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_video_axi0_clk = {
+	.halt_reg = 0xb024,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0xb024,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_video_axi0_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_video_axi1_clk = {
+	.halt_reg = 0xb028,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0xb028,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_video_axi1_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_video_xo_clk = {
+	.halt_reg = 0xb03c,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0xb03c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_video_xo_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct gdsc pcie_0_gdsc = {
+	.gdscr = 0x6b004,
+	.pd = {
+		.name = "pcie_0_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc pcie_1_gdsc = {
+	.gdscr = 0x8d004,
+	.pd = {
+		.name = "pcie_1_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc pcie_2_gdsc = {
+	.gdscr = 0x6004,
+	.pd = {
+		.name = "pcie_2_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc ufs_card_gdsc = {
+	.gdscr = 0x75004,
+	.pd = {
+		.name = "ufs_card_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc ufs_phy_gdsc = {
+	.gdscr = 0x77004,
+	.pd = {
+		.name = "ufs_phy_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc usb30_prim_gdsc = {
+	.gdscr = 0xf004,
+	.pd = {
+		.name = "usb30_prim_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc usb30_sec_gdsc = {
+	.gdscr = 0x10004,
+	.pd = {
+		.name = "usb30_sec_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc hlos1_vote_mmnoc_mmu_tbu_hf0_gdsc = {
+	.gdscr = 0x7d050,
+	.pd = {
+		.name = "hlos1_vote_mmnoc_mmu_tbu_hf0_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+	.flags = VOTABLE,
+};
+
+static struct gdsc hlos1_vote_mmnoc_mmu_tbu_hf1_gdsc = {
+	.gdscr = 0x7d058,
+	.pd = {
+		.name = "hlos1_vote_mmnoc_mmu_tbu_hf1_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+	.flags = VOTABLE,
+};
+
+static struct gdsc hlos1_vote_mmnoc_mmu_tbu_sf0_gdsc = {
+	.gdscr = 0x7d054,
+	.pd = {
+		.name = "hlos1_vote_mmnoc_mmu_tbu_sf0_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+	.flags = VOTABLE,
+};
+
+static struct gdsc hlos1_vote_mmnoc_mmu_tbu_sf1_gdsc = {
+	.gdscr = 0x7d06c,
+	.pd = {
+		.name = "hlos1_vote_mmnoc_mmu_tbu_sf1_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+	.flags = VOTABLE,
+};
+
+static struct clk_regmap *gcc_sm8250_clocks[] = {
+	[GCC_AGGRE_NOC_PCIE_TBU_CLK] = &gcc_aggre_noc_pcie_tbu_clk.clkr,
+	[GCC_AGGRE_UFS_CARD_AXI_CLK] = &gcc_aggre_ufs_card_axi_clk.clkr,
+	[GCC_AGGRE_UFS_PHY_AXI_CLK] = &gcc_aggre_ufs_phy_axi_clk.clkr,
+	[GCC_AGGRE_USB3_PRIM_AXI_CLK] = &gcc_aggre_usb3_prim_axi_clk.clkr,
+	[GCC_AGGRE_USB3_SEC_AXI_CLK] = &gcc_aggre_usb3_sec_axi_clk.clkr,
+	[GCC_BOOT_ROM_AHB_CLK] = &gcc_boot_rom_ahb_clk.clkr,
+	[GCC_CAMERA_HF_AXI_CLK] = &gcc_camera_hf_axi_clk.clkr,
+	[GCC_CAMERA_SF_AXI_CLK] = &gcc_camera_sf_axi_clk.clkr,
+	[GCC_CAMERA_XO_CLK] = &gcc_camera_xo_clk.clkr,
+	[GCC_CFG_NOC_USB3_PRIM_AXI_CLK] = &gcc_cfg_noc_usb3_prim_axi_clk.clkr,
+	[GCC_CFG_NOC_USB3_SEC_AXI_CLK] = &gcc_cfg_noc_usb3_sec_axi_clk.clkr,
+	[GCC_CPUSS_AHB_CLK] = &gcc_cpuss_ahb_clk.clkr,
+	[GCC_CPUSS_AHB_CLK_SRC] = &gcc_cpuss_ahb_clk_src.clkr,
+	[GCC_CPUSS_AHB_POSTDIV_CLK_SRC] = &gcc_cpuss_ahb_postdiv_clk_src.clkr,
+	[GCC_CPUSS_RBCPR_CLK] = &gcc_cpuss_rbcpr_clk.clkr,
+	[GCC_DDRSS_GPU_AXI_CLK] = &gcc_ddrss_gpu_axi_clk.clkr,
+	[GCC_DDRSS_PCIE_SF_TBU_CLK] = &gcc_ddrss_pcie_sf_tbu_clk.clkr,
+	[GCC_DISP_HF_AXI_CLK] = &gcc_disp_hf_axi_clk.clkr,
+	[GCC_DISP_SF_AXI_CLK] = &gcc_disp_sf_axi_clk.clkr,
+	[GCC_DISP_XO_CLK] = &gcc_disp_xo_clk.clkr,
+	[GCC_GP1_CLK] = &gcc_gp1_clk.clkr,
+	[GCC_GP1_CLK_SRC] = &gcc_gp1_clk_src.clkr,
+	[GCC_GP2_CLK] = &gcc_gp2_clk.clkr,
+	[GCC_GP2_CLK_SRC] = &gcc_gp2_clk_src.clkr,
+	[GCC_GP3_CLK] = &gcc_gp3_clk.clkr,
+	[GCC_GP3_CLK_SRC] = &gcc_gp3_clk_src.clkr,
+	[GCC_GPU_GPLL0_CLK_SRC] = &gcc_gpu_gpll0_clk_src.clkr,
+	[GCC_GPU_GPLL0_DIV_CLK_SRC] = &gcc_gpu_gpll0_div_clk_src.clkr,
+	[GCC_GPU_IREF_EN] = &gcc_gpu_iref_en.clkr,
+	[GCC_GPU_MEMNOC_GFX_CLK] = &gcc_gpu_memnoc_gfx_clk.clkr,
+	[GCC_GPU_SNOC_DVM_GFX_CLK] = &gcc_gpu_snoc_dvm_gfx_clk.clkr,
+	[GCC_NPU_AXI_CLK] = &gcc_npu_axi_clk.clkr,
+	[GCC_NPU_BWMON_AXI_CLK] = &gcc_npu_bwmon_axi_clk.clkr,
+	[GCC_NPU_BWMON_CFG_AHB_CLK] = &gcc_npu_bwmon_cfg_ahb_clk.clkr,
+	[GCC_NPU_CFG_AHB_CLK] = &gcc_npu_cfg_ahb_clk.clkr,
+	[GCC_NPU_DMA_CLK] = &gcc_npu_dma_clk.clkr,
+	[GCC_NPU_GPLL0_CLK_SRC] = &gcc_npu_gpll0_clk_src.clkr,
+	[GCC_NPU_GPLL0_DIV_CLK_SRC] = &gcc_npu_gpll0_div_clk_src.clkr,
+	[GCC_PCIE0_PHY_REFGEN_CLK] = &gcc_pcie0_phy_refgen_clk.clkr,
+	[GCC_PCIE1_PHY_REFGEN_CLK] = &gcc_pcie1_phy_refgen_clk.clkr,
+	[GCC_PCIE2_PHY_REFGEN_CLK] = &gcc_pcie2_phy_refgen_clk.clkr,
+	[GCC_PCIE_0_AUX_CLK] = &gcc_pcie_0_aux_clk.clkr,
+	[GCC_PCIE_0_AUX_CLK_SRC] = &gcc_pcie_0_aux_clk_src.clkr,
+	[GCC_PCIE_0_CFG_AHB_CLK] = &gcc_pcie_0_cfg_ahb_clk.clkr,
+	[GCC_PCIE_0_MSTR_AXI_CLK] = &gcc_pcie_0_mstr_axi_clk.clkr,
+	[GCC_PCIE_0_PIPE_CLK] = &gcc_pcie_0_pipe_clk.clkr,
+	[GCC_PCIE_0_SLV_AXI_CLK] = &gcc_pcie_0_slv_axi_clk.clkr,
+	[GCC_PCIE_0_SLV_Q2A_AXI_CLK] = &gcc_pcie_0_slv_q2a_axi_clk.clkr,
+	[GCC_PCIE_1_AUX_CLK] = &gcc_pcie_1_aux_clk.clkr,
+	[GCC_PCIE_1_AUX_CLK_SRC] = &gcc_pcie_1_aux_clk_src.clkr,
+	[GCC_PCIE_1_CFG_AHB_CLK] = &gcc_pcie_1_cfg_ahb_clk.clkr,
+	[GCC_PCIE_1_MSTR_AXI_CLK] = &gcc_pcie_1_mstr_axi_clk.clkr,
+	[GCC_PCIE_1_PIPE_CLK] = &gcc_pcie_1_pipe_clk.clkr,
+	[GCC_PCIE_1_SLV_AXI_CLK] = &gcc_pcie_1_slv_axi_clk.clkr,
+	[GCC_PCIE_1_SLV_Q2A_AXI_CLK] = &gcc_pcie_1_slv_q2a_axi_clk.clkr,
+	[GCC_PCIE_2_AUX_CLK] = &gcc_pcie_2_aux_clk.clkr,
+	[GCC_PCIE_2_AUX_CLK_SRC] = &gcc_pcie_2_aux_clk_src.clkr,
+	[GCC_PCIE_2_CFG_AHB_CLK] = &gcc_pcie_2_cfg_ahb_clk.clkr,
+	[GCC_PCIE_2_MSTR_AXI_CLK] = &gcc_pcie_2_mstr_axi_clk.clkr,
+	[GCC_PCIE_2_PIPE_CLK] = &gcc_pcie_2_pipe_clk.clkr,
+	[GCC_PCIE_2_SLV_AXI_CLK] = &gcc_pcie_2_slv_axi_clk.clkr,
+	[GCC_PCIE_2_SLV_Q2A_AXI_CLK] = &gcc_pcie_2_slv_q2a_axi_clk.clkr,
+	[GCC_PCIE_MDM_CLKREF_EN] = &gcc_pcie_mdm_clkref_en.clkr,
+	[GCC_PCIE_PHY_AUX_CLK] = &gcc_pcie_phy_aux_clk.clkr,
+	[GCC_PCIE_PHY_REFGEN_CLK_SRC] = &gcc_pcie_phy_refgen_clk_src.clkr,
+	[GCC_PCIE_WIFI_CLKREF_EN] = &gcc_pcie_wifi_clkref_en.clkr,
+	[GCC_PCIE_WIGIG_CLKREF_EN] = &gcc_pcie_wigig_clkref_en.clkr,
+	[GCC_PDM2_CLK] = &gcc_pdm2_clk.clkr,
+	[GCC_PDM2_CLK_SRC] = &gcc_pdm2_clk_src.clkr,
+	[GCC_PDM_AHB_CLK] = &gcc_pdm_ahb_clk.clkr,
+	[GCC_PDM_XO4_CLK] = &gcc_pdm_xo4_clk.clkr,
+	[GCC_PRNG_AHB_CLK] = &gcc_prng_ahb_clk.clkr,
+	[GCC_QMIP_CAMERA_NRT_AHB_CLK] = &gcc_qmip_camera_nrt_ahb_clk.clkr,
+	[GCC_QMIP_CAMERA_RT_AHB_CLK] = &gcc_qmip_camera_rt_ahb_clk.clkr,
+	[GCC_QMIP_DISP_AHB_CLK] = &gcc_qmip_disp_ahb_clk.clkr,
+	[GCC_QMIP_VIDEO_CVP_AHB_CLK] = &gcc_qmip_video_cvp_ahb_clk.clkr,
+	[GCC_QMIP_VIDEO_VCODEC_AHB_CLK] = &gcc_qmip_video_vcodec_ahb_clk.clkr,
+	[GCC_QUPV3_WRAP0_CORE_2X_CLK] = &gcc_qupv3_wrap0_core_2x_clk.clkr,
+	[GCC_QUPV3_WRAP0_CORE_CLK] = &gcc_qupv3_wrap0_core_clk.clkr,
+	[GCC_QUPV3_WRAP0_S0_CLK] = &gcc_qupv3_wrap0_s0_clk.clkr,
+	[GCC_QUPV3_WRAP0_S0_CLK_SRC] = &gcc_qupv3_wrap0_s0_clk_src.clkr,
+	[GCC_QUPV3_WRAP0_S1_CLK] = &gcc_qupv3_wrap0_s1_clk.clkr,
+	[GCC_QUPV3_WRAP0_S1_CLK_SRC] = &gcc_qupv3_wrap0_s1_clk_src.clkr,
+	[GCC_QUPV3_WRAP0_S2_CLK] = &gcc_qupv3_wrap0_s2_clk.clkr,
+	[GCC_QUPV3_WRAP0_S2_CLK_SRC] = &gcc_qupv3_wrap0_s2_clk_src.clkr,
+	[GCC_QUPV3_WRAP0_S3_CLK] = &gcc_qupv3_wrap0_s3_clk.clkr,
+	[GCC_QUPV3_WRAP0_S3_CLK_SRC] = &gcc_qupv3_wrap0_s3_clk_src.clkr,
+	[GCC_QUPV3_WRAP0_S4_CLK] = &gcc_qupv3_wrap0_s4_clk.clkr,
+	[GCC_QUPV3_WRAP0_S4_CLK_SRC] = &gcc_qupv3_wrap0_s4_clk_src.clkr,
+	[GCC_QUPV3_WRAP0_S5_CLK] = &gcc_qupv3_wrap0_s5_clk.clkr,
+	[GCC_QUPV3_WRAP0_S5_CLK_SRC] = &gcc_qupv3_wrap0_s5_clk_src.clkr,
+	[GCC_QUPV3_WRAP0_S6_CLK] = &gcc_qupv3_wrap0_s6_clk.clkr,
+	[GCC_QUPV3_WRAP0_S6_CLK_SRC] = &gcc_qupv3_wrap0_s6_clk_src.clkr,
+	[GCC_QUPV3_WRAP0_S7_CLK] = &gcc_qupv3_wrap0_s7_clk.clkr,
+	[GCC_QUPV3_WRAP0_S7_CLK_SRC] = &gcc_qupv3_wrap0_s7_clk_src.clkr,
+	[GCC_QUPV3_WRAP1_CORE_2X_CLK] = &gcc_qupv3_wrap1_core_2x_clk.clkr,
+	[GCC_QUPV3_WRAP1_CORE_CLK] = &gcc_qupv3_wrap1_core_clk.clkr,
+	[GCC_QUPV3_WRAP1_S0_CLK] = &gcc_qupv3_wrap1_s0_clk.clkr,
+	[GCC_QUPV3_WRAP1_S0_CLK_SRC] = &gcc_qupv3_wrap1_s0_clk_src.clkr,
+	[GCC_QUPV3_WRAP1_S1_CLK] = &gcc_qupv3_wrap1_s1_clk.clkr,
+	[GCC_QUPV3_WRAP1_S1_CLK_SRC] = &gcc_qupv3_wrap1_s1_clk_src.clkr,
+	[GCC_QUPV3_WRAP1_S2_CLK] = &gcc_qupv3_wrap1_s2_clk.clkr,
+	[GCC_QUPV3_WRAP1_S2_CLK_SRC] = &gcc_qupv3_wrap1_s2_clk_src.clkr,
+	[GCC_QUPV3_WRAP1_S3_CLK] = &gcc_qupv3_wrap1_s3_clk.clkr,
+	[GCC_QUPV3_WRAP1_S3_CLK_SRC] = &gcc_qupv3_wrap1_s3_clk_src.clkr,
+	[GCC_QUPV3_WRAP1_S4_CLK] = &gcc_qupv3_wrap1_s4_clk.clkr,
+	[GCC_QUPV3_WRAP1_S4_CLK_SRC] = &gcc_qupv3_wrap1_s4_clk_src.clkr,
+	[GCC_QUPV3_WRAP1_S5_CLK] = &gcc_qupv3_wrap1_s5_clk.clkr,
+	[GCC_QUPV3_WRAP1_S5_CLK_SRC] = &gcc_qupv3_wrap1_s5_clk_src.clkr,
+	[GCC_QUPV3_WRAP2_CORE_2X_CLK] = &gcc_qupv3_wrap2_core_2x_clk.clkr,
+	[GCC_QUPV3_WRAP2_CORE_CLK] = &gcc_qupv3_wrap2_core_clk.clkr,
+	[GCC_QUPV3_WRAP2_S0_CLK] = &gcc_qupv3_wrap2_s0_clk.clkr,
+	[GCC_QUPV3_WRAP2_S0_CLK_SRC] = &gcc_qupv3_wrap2_s0_clk_src.clkr,
+	[GCC_QUPV3_WRAP2_S1_CLK] = &gcc_qupv3_wrap2_s1_clk.clkr,
+	[GCC_QUPV3_WRAP2_S1_CLK_SRC] = &gcc_qupv3_wrap2_s1_clk_src.clkr,
+	[GCC_QUPV3_WRAP2_S2_CLK] = &gcc_qupv3_wrap2_s2_clk.clkr,
+	[GCC_QUPV3_WRAP2_S2_CLK_SRC] = &gcc_qupv3_wrap2_s2_clk_src.clkr,
+	[GCC_QUPV3_WRAP2_S3_CLK] = &gcc_qupv3_wrap2_s3_clk.clkr,
+	[GCC_QUPV3_WRAP2_S3_CLK_SRC] = &gcc_qupv3_wrap2_s3_clk_src.clkr,
+	[GCC_QUPV3_WRAP2_S4_CLK] = &gcc_qupv3_wrap2_s4_clk.clkr,
+	[GCC_QUPV3_WRAP2_S4_CLK_SRC] = &gcc_qupv3_wrap2_s4_clk_src.clkr,
+	[GCC_QUPV3_WRAP2_S5_CLK] = &gcc_qupv3_wrap2_s5_clk.clkr,
+	[GCC_QUPV3_WRAP2_S5_CLK_SRC] = &gcc_qupv3_wrap2_s5_clk_src.clkr,
+	[GCC_QUPV3_WRAP_0_M_AHB_CLK] = &gcc_qupv3_wrap_0_m_ahb_clk.clkr,
+	[GCC_QUPV3_WRAP_0_S_AHB_CLK] = &gcc_qupv3_wrap_0_s_ahb_clk.clkr,
+	[GCC_QUPV3_WRAP_1_M_AHB_CLK] = &gcc_qupv3_wrap_1_m_ahb_clk.clkr,
+	[GCC_QUPV3_WRAP_1_S_AHB_CLK] = &gcc_qupv3_wrap_1_s_ahb_clk.clkr,
+	[GCC_QUPV3_WRAP_2_M_AHB_CLK] = &gcc_qupv3_wrap_2_m_ahb_clk.clkr,
+	[GCC_QUPV3_WRAP_2_S_AHB_CLK] = &gcc_qupv3_wrap_2_s_ahb_clk.clkr,
+	[GCC_SDCC2_AHB_CLK] = &gcc_sdcc2_ahb_clk.clkr,
+	[GCC_SDCC2_APPS_CLK] = &gcc_sdcc2_apps_clk.clkr,
+	[GCC_SDCC2_APPS_CLK_SRC] = &gcc_sdcc2_apps_clk_src.clkr,
+	[GCC_SDCC4_AHB_CLK] = &gcc_sdcc4_ahb_clk.clkr,
+	[GCC_SDCC4_APPS_CLK] = &gcc_sdcc4_apps_clk.clkr,
+	[GCC_SDCC4_APPS_CLK_SRC] = &gcc_sdcc4_apps_clk_src.clkr,
+	[GCC_TSIF_AHB_CLK] = &gcc_tsif_ahb_clk.clkr,
+	[GCC_TSIF_INACTIVITY_TIMERS_CLK] = &gcc_tsif_inactivity_timers_clk.clkr,
+	[GCC_TSIF_REF_CLK] = &gcc_tsif_ref_clk.clkr,
+	[GCC_TSIF_REF_CLK_SRC] = &gcc_tsif_ref_clk_src.clkr,
+	[GCC_UFS_1X_CLKREF_EN] = &gcc_ufs_1x_clkref_en.clkr,
+	[GCC_UFS_CARD_AHB_CLK] = &gcc_ufs_card_ahb_clk.clkr,
+	[GCC_UFS_CARD_AXI_CLK] = &gcc_ufs_card_axi_clk.clkr,
+	[GCC_UFS_CARD_AXI_CLK_SRC] = &gcc_ufs_card_axi_clk_src.clkr,
+	[GCC_UFS_CARD_ICE_CORE_CLK] = &gcc_ufs_card_ice_core_clk.clkr,
+	[GCC_UFS_CARD_ICE_CORE_CLK_SRC] = &gcc_ufs_card_ice_core_clk_src.clkr,
+	[GCC_UFS_CARD_PHY_AUX_CLK] = &gcc_ufs_card_phy_aux_clk.clkr,
+	[GCC_UFS_CARD_PHY_AUX_CLK_SRC] = &gcc_ufs_card_phy_aux_clk_src.clkr,
+	[GCC_UFS_CARD_RX_SYMBOL_0_CLK] = &gcc_ufs_card_rx_symbol_0_clk.clkr,
+	[GCC_UFS_CARD_RX_SYMBOL_1_CLK] = &gcc_ufs_card_rx_symbol_1_clk.clkr,
+	[GCC_UFS_CARD_TX_SYMBOL_0_CLK] = &gcc_ufs_card_tx_symbol_0_clk.clkr,
+	[GCC_UFS_CARD_UNIPRO_CORE_CLK] = &gcc_ufs_card_unipro_core_clk.clkr,
+	[GCC_UFS_CARD_UNIPRO_CORE_CLK_SRC] =
+		&gcc_ufs_card_unipro_core_clk_src.clkr,
+	[GCC_UFS_PHY_AHB_CLK] = &gcc_ufs_phy_ahb_clk.clkr,
+	[GCC_UFS_PHY_AXI_CLK] = &gcc_ufs_phy_axi_clk.clkr,
+	[GCC_UFS_PHY_AXI_CLK_SRC] = &gcc_ufs_phy_axi_clk_src.clkr,
+	[GCC_UFS_PHY_ICE_CORE_CLK] = &gcc_ufs_phy_ice_core_clk.clkr,
+	[GCC_UFS_PHY_ICE_CORE_CLK_SRC] = &gcc_ufs_phy_ice_core_clk_src.clkr,
+	[GCC_UFS_PHY_PHY_AUX_CLK] = &gcc_ufs_phy_phy_aux_clk.clkr,
+	[GCC_UFS_PHY_PHY_AUX_CLK_SRC] = &gcc_ufs_phy_phy_aux_clk_src.clkr,
+	[GCC_UFS_PHY_RX_SYMBOL_0_CLK] = &gcc_ufs_phy_rx_symbol_0_clk.clkr,
+	[GCC_UFS_PHY_RX_SYMBOL_1_CLK] = &gcc_ufs_phy_rx_symbol_1_clk.clkr,
+	[GCC_UFS_PHY_TX_SYMBOL_0_CLK] = &gcc_ufs_phy_tx_symbol_0_clk.clkr,
+	[GCC_UFS_PHY_UNIPRO_CORE_CLK] = &gcc_ufs_phy_unipro_core_clk.clkr,
+	[GCC_UFS_PHY_UNIPRO_CORE_CLK_SRC] =
+		&gcc_ufs_phy_unipro_core_clk_src.clkr,
+	[GCC_USB30_PRIM_MASTER_CLK] = &gcc_usb30_prim_master_clk.clkr,
+	[GCC_USB30_PRIM_MASTER_CLK_SRC] = &gcc_usb30_prim_master_clk_src.clkr,
+	[GCC_USB30_PRIM_MOCK_UTMI_CLK] = &gcc_usb30_prim_mock_utmi_clk.clkr,
+	[GCC_USB30_PRIM_MOCK_UTMI_CLK_SRC] =
+		&gcc_usb30_prim_mock_utmi_clk_src.clkr,
+	[GCC_USB30_PRIM_MOCK_UTMI_POSTDIV_CLK_SRC] =
+		&gcc_usb30_prim_mock_utmi_postdiv_clk_src.clkr,
+	[GCC_USB30_PRIM_SLEEP_CLK] = &gcc_usb30_prim_sleep_clk.clkr,
+	[GCC_USB30_SEC_MASTER_CLK] = &gcc_usb30_sec_master_clk.clkr,
+	[GCC_USB30_SEC_MASTER_CLK_SRC] = &gcc_usb30_sec_master_clk_src.clkr,
+	[GCC_USB30_SEC_MOCK_UTMI_CLK] = &gcc_usb30_sec_mock_utmi_clk.clkr,
+	[GCC_USB30_SEC_MOCK_UTMI_CLK_SRC] =
+		&gcc_usb30_sec_mock_utmi_clk_src.clkr,
+	[GCC_USB30_SEC_MOCK_UTMI_POSTDIV_CLK_SRC] =
+		&gcc_usb30_sec_mock_utmi_postdiv_clk_src.clkr,
+	[GCC_USB30_SEC_SLEEP_CLK] = &gcc_usb30_sec_sleep_clk.clkr,
+	[GCC_USB3_PRIM_PHY_AUX_CLK] = &gcc_usb3_prim_phy_aux_clk.clkr,
+	[GCC_USB3_PRIM_PHY_AUX_CLK_SRC] = &gcc_usb3_prim_phy_aux_clk_src.clkr,
+	[GCC_USB3_PRIM_PHY_COM_AUX_CLK] = &gcc_usb3_prim_phy_com_aux_clk.clkr,
+	[GCC_USB3_PRIM_PHY_PIPE_CLK] = &gcc_usb3_prim_phy_pipe_clk.clkr,
+	[GCC_USB3_SEC_CLKREF_EN] = &gcc_usb3_sec_clkref_en.clkr,
+	[GCC_USB3_SEC_PHY_AUX_CLK] = &gcc_usb3_sec_phy_aux_clk.clkr,
+	[GCC_USB3_SEC_PHY_AUX_CLK_SRC] = &gcc_usb3_sec_phy_aux_clk_src.clkr,
+	[GCC_USB3_SEC_PHY_COM_AUX_CLK] = &gcc_usb3_sec_phy_com_aux_clk.clkr,
+	[GCC_USB3_SEC_PHY_PIPE_CLK] = &gcc_usb3_sec_phy_pipe_clk.clkr,
+	[GCC_VIDEO_AXI0_CLK] = &gcc_video_axi0_clk.clkr,
+	[GCC_VIDEO_AXI1_CLK] = &gcc_video_axi1_clk.clkr,
+	[GCC_VIDEO_XO_CLK] = &gcc_video_xo_clk.clkr,
+	[GPLL0] = &gpll0.clkr,
+	[GPLL0_OUT_EVEN] = &gpll0_out_even.clkr,
+	[GPLL4] = &gpll4.clkr,
+	[GPLL9] = &gpll9.clkr,
+};
+
+static struct gdsc *gcc_sm8250_gdscs[] = {
+	[PCIE_0_GDSC] = &pcie_0_gdsc,
+	[PCIE_1_GDSC] = &pcie_1_gdsc,
+	[PCIE_2_GDSC] = &pcie_2_gdsc,
+	[UFS_CARD_GDSC] = &ufs_card_gdsc,
+	[UFS_PHY_GDSC] = &ufs_phy_gdsc,
+	[USB30_PRIM_GDSC] = &usb30_prim_gdsc,
+	[USB30_SEC_GDSC] = &usb30_sec_gdsc,
+	[HLOS1_VOTE_MMNOC_MMU_TBU_HF0_GDSC] =
+					&hlos1_vote_mmnoc_mmu_tbu_hf0_gdsc,
+	[HLOS1_VOTE_MMNOC_MMU_TBU_HF1_GDSC] =
+					&hlos1_vote_mmnoc_mmu_tbu_hf1_gdsc,
+	[HLOS1_VOTE_MMNOC_MMU_TBU_SF0_GDSC] =
+					&hlos1_vote_mmnoc_mmu_tbu_sf0_gdsc,
+	[HLOS1_VOTE_MMNOC_MMU_TBU_SF1_GDSC] =
+					&hlos1_vote_mmnoc_mmu_tbu_sf1_gdsc,
+};
+
+static const struct qcom_reset_map gcc_sm8250_resets[] = {
+	[GCC_GPU_BCR] = { 0x71000 },
+	[GCC_MMSS_BCR] = { 0xb000 },
+	[GCC_NPU_BWMON_BCR] = { 0x73000 },
+	[GCC_NPU_BCR] = { 0x4d000 },
+	[GCC_PCIE_0_BCR] = { 0x6b000 },
+	[GCC_PCIE_0_LINK_DOWN_BCR] = { 0x6c014 },
+	[GCC_PCIE_0_NOCSR_COM_PHY_BCR] = { 0x6c020 },
+	[GCC_PCIE_0_PHY_BCR] = { 0x6c01c },
+	[GCC_PCIE_0_PHY_NOCSR_COM_PHY_BCR] = { 0x6c028 },
+	[GCC_PCIE_1_BCR] = { 0x8d000 },
+	[GCC_PCIE_1_LINK_DOWN_BCR] = { 0x8e014 },
+	[GCC_PCIE_1_NOCSR_COM_PHY_BCR] = { 0x8e020 },
+	[GCC_PCIE_1_PHY_BCR] = { 0x8e01c },
+	[GCC_PCIE_1_PHY_NOCSR_COM_PHY_BCR] = { 0x8e000 },
+	[GCC_PCIE_2_BCR] = { 0x6000 },
+	[GCC_PCIE_2_LINK_DOWN_BCR] = { 0x1f014 },
+	[GCC_PCIE_2_NOCSR_COM_PHY_BCR] = { 0x1f020 },
+	[GCC_PCIE_2_PHY_BCR] = { 0x1f01c },
+	[GCC_PCIE_2_PHY_NOCSR_COM_PHY_BCR] = { 0x1f028 },
+	[GCC_PCIE_PHY_BCR] = { 0x6f000 },
+	[GCC_PCIE_PHY_CFG_AHB_BCR] = { 0x6f00c },
+	[GCC_PCIE_PHY_COM_BCR] = { 0x6f010 },
+	[GCC_PDM_BCR] = { 0x33000 },
+	[GCC_PRNG_BCR] = { 0x34000 },
+	[GCC_QUPV3_WRAPPER_0_BCR] = { 0x17000 },
+	[GCC_QUPV3_WRAPPER_1_BCR] = { 0x18000 },
+	[GCC_QUPV3_WRAPPER_2_BCR] = { 0x1e000 },
+	[GCC_QUSB2PHY_PRIM_BCR] = { 0x12000 },
+	[GCC_QUSB2PHY_SEC_BCR] = { 0x12004 },
+	[GCC_SDCC2_BCR] = { 0x14000 },
+	[GCC_SDCC4_BCR] = { 0x16000 },
+	[GCC_TSIF_BCR] = { 0x36000 },
+	[GCC_UFS_CARD_BCR] = { 0x75000 },
+	[GCC_UFS_PHY_BCR] = { 0x77000 },
+	[GCC_USB30_PRIM_BCR] = { 0xf000 },
+	[GCC_USB30_SEC_BCR] = { 0x10000 },
+	[GCC_USB3_DP_PHY_PRIM_BCR] = { 0x50008 },
+	[GCC_USB3_DP_PHY_SEC_BCR] = { 0x50014 },
+	[GCC_USB3_PHY_PRIM_BCR] = { 0x50000 },
+	[GCC_USB3_PHY_SEC_BCR] = { 0x5000c },
+	[GCC_USB3PHY_PHY_PRIM_BCR] = { 0x50004 },
+	[GCC_USB3PHY_PHY_SEC_BCR] = { 0x50010 },
+	[GCC_USB_PHY_CFG_AHB2PHY_BCR] = { 0x6a000 },
+	[GCC_VIDEO_AXI0_CLK_ARES] = { 0xb024, 2 },
+	[GCC_VIDEO_AXI1_CLK_ARES] = { 0xb028, 2 },
+};
+
+static const struct clk_rcg_dfs_data gcc_dfs_clocks[] = {
+	DEFINE_RCG_DFS(gcc_qupv3_wrap0_s0_clk_src),
+	DEFINE_RCG_DFS(gcc_qupv3_wrap0_s1_clk_src),
+	DEFINE_RCG_DFS(gcc_qupv3_wrap0_s2_clk_src),
+	DEFINE_RCG_DFS(gcc_qupv3_wrap0_s3_clk_src),
+	DEFINE_RCG_DFS(gcc_qupv3_wrap0_s4_clk_src),
+	DEFINE_RCG_DFS(gcc_qupv3_wrap0_s5_clk_src),
+	DEFINE_RCG_DFS(gcc_qupv3_wrap0_s6_clk_src),
+	DEFINE_RCG_DFS(gcc_qupv3_wrap0_s7_clk_src),
+	DEFINE_RCG_DFS(gcc_qupv3_wrap1_s0_clk_src),
+	DEFINE_RCG_DFS(gcc_qupv3_wrap1_s1_clk_src),
+	DEFINE_RCG_DFS(gcc_qupv3_wrap1_s2_clk_src),
+	DEFINE_RCG_DFS(gcc_qupv3_wrap1_s3_clk_src),
+	DEFINE_RCG_DFS(gcc_qupv3_wrap1_s4_clk_src),
+	DEFINE_RCG_DFS(gcc_qupv3_wrap1_s5_clk_src),
+	DEFINE_RCG_DFS(gcc_qupv3_wrap2_s0_clk_src),
+	DEFINE_RCG_DFS(gcc_qupv3_wrap2_s1_clk_src),
+	DEFINE_RCG_DFS(gcc_qupv3_wrap2_s2_clk_src),
+	DEFINE_RCG_DFS(gcc_qupv3_wrap2_s3_clk_src),
+	DEFINE_RCG_DFS(gcc_qupv3_wrap2_s4_clk_src),
+	DEFINE_RCG_DFS(gcc_qupv3_wrap2_s5_clk_src),
+};
+
+static const struct regmap_config gcc_sm8250_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.max_register = 0x9c100,
+	.fast_io = true,
+};
+
+static const struct qcom_cc_desc gcc_sm8250_desc = {
+	.config = &gcc_sm8250_regmap_config,
+	.clks = gcc_sm8250_clocks,
+	.num_clks = ARRAY_SIZE(gcc_sm8250_clocks),
+	.resets = gcc_sm8250_resets,
+	.num_resets = ARRAY_SIZE(gcc_sm8250_resets),
+	.gdscs = gcc_sm8250_gdscs,
+	.num_gdscs = ARRAY_SIZE(gcc_sm8250_gdscs),
+};
+
+static const struct of_device_id gcc_sm8250_match_table[] = {
+	{ .compatible = "qcom,gcc-sm8250" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, gcc_sm8250_match_table);
+
+static int gcc_sm8250_probe(struct platform_device *pdev)
+{
+	struct regmap *regmap;
+	int ret;
+
+	regmap = qcom_cc_map(pdev, &gcc_sm8250_desc);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	/*
+	 * Disable the GPLL0 active input to NPU and GPU
+	 * via MISC registers.
+	 */
+	regmap_update_bits(regmap, 0x4d110, 0x3, 0x3);
+	regmap_update_bits(regmap, 0x71028, 0x3, 0x3);
+
+	/*
+	 * Keep the clocks always-ON
+	 * GCC_VIDEO_AHB_CLK, GCC_CAMERA_AHB_CLK, GCC_DISP_AHB_CLK,
+	 * GCC_CPUSS_DVM_BUS_CLK, GCC_GPU_CFG_AHB_CLK,
+	 * GCC_SYS_NOC_CPUSS_AHB_CLK
+	 */
+	regmap_update_bits(regmap, 0x0b004, BIT(0), BIT(0));
+	regmap_update_bits(regmap, 0x0b008, BIT(0), BIT(0));
+	regmap_update_bits(regmap, 0x0b00c, BIT(0), BIT(0));
+	regmap_update_bits(regmap, 0x4818c, BIT(0), BIT(0));
+	regmap_update_bits(regmap, 0x71004, BIT(0), BIT(0));
+	regmap_update_bits(regmap, 0x52000, BIT(0), BIT(0));
+
+	ret = qcom_cc_register_rcg_dfs(regmap, gcc_dfs_clocks,
+				       ARRAY_SIZE(gcc_dfs_clocks));
+	if (ret)
+		return ret;
+
+	return qcom_cc_really_probe(pdev, &gcc_sm8250_desc, regmap);
+}
+
+static struct platform_driver gcc_sm8250_driver = {
+	.probe = gcc_sm8250_probe,
+	.driver = {
+		.name = "gcc-sm8250",
+		.of_match_table = gcc_sm8250_match_table,
+	},
+};
+
+static int __init gcc_sm8250_init(void)
+{
+	return platform_driver_register(&gcc_sm8250_driver);
+}
+subsys_initcall(gcc_sm8250_init);
+
+static void __exit gcc_sm8250_exit(void)
+{
+	platform_driver_unregister(&gcc_sm8250_driver);
+}
+module_exit(gcc_sm8250_exit);
+
+MODULE_DESCRIPTION("QTI GCC SM8250 Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/clk/qcom/gpucc-sc7180.c b/drivers/clk/qcom/gpucc-sc7180.c
index a96c0b9..7b656b6 100644
--- a/drivers/clk/qcom/gpucc-sc7180.c
+++ b/drivers/clk/qcom/gpucc-sc7180.c
@@ -170,8 +170,45 @@ static struct gdsc cx_gdsc = {
 	.flags = VOTABLE,
 };
 
+/*
+ * On SC7180 the GPU GX domain is *almost* entirely controlled by the GMU
+ * running in the CX domain so the CPU doesn't need to know anything about the
+ * GX domain EXCEPT....
+ *
+ * Hardware constraints dictate that the GX be powered down before the CX. If
+ * the GMU crashes it could leave the GX on. In order to successfully bring back
+ * the device the CPU needs to disable the GX headswitch. There being no sane
+ * way to reach in and touch that register from deep inside the GPU driver we
+ * need to set up the infrastructure to be able to ensure that the GPU can
+ * ensure that the GX is off during this super special case. We do this by
+ * defining a GX gdsc with a dummy enable function and a "default" disable
+ * function.
+ *
+ * This allows us to attach with genpd_dev_pm_attach_by_name() in the GPU
+ * driver. During power up, nothing will happen from the CPU (and the GMU will
+ * power up normally but during power down this will ensure that the GX domain
+ * is *really* off - this gives us a semi standard way of doing what we need.
+ */
+static int gx_gdsc_enable(struct generic_pm_domain *domain)
+{
+	/* Do nothing but give genpd the impression that we were successful */
+	return 0;
+}
+
+static struct gdsc gx_gdsc = {
+	.gdscr = 0x100c,
+	.clamp_io_ctrl = 0x1508,
+	.pd = {
+		.name = "gx_gdsc",
+		.power_on = gx_gdsc_enable,
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+	.flags = CLAMP_IO,
+};
+
 static struct gdsc *gpu_cc_sc7180_gdscs[] = {
 	[CX_GDSC] = &cx_gdsc,
+	[GX_GDSC] = &gx_gdsc,
 };
 
 static struct clk_regmap *gpu_cc_sc7180_clocks[] = {
diff --git a/drivers/clk/qcom/mss-sc7180.c b/drivers/clk/qcom/mss-sc7180.c
new file mode 100644
index 0000000..673fa1a
--- /dev/null
+++ b/drivers/clk/qcom/mss-sc7180.c
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/pm_clock.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,mss-sc7180.h>
+
+#include "clk-regmap.h"
+#include "clk-branch.h"
+#include "common.h"
+
+static struct clk_branch mss_axi_nav_clk = {
+	.halt_reg = 0x20bc,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x20bc,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "mss_axi_nav_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.fw_name = "gcc_mss_nav_axi",
+			},
+			.num_parents = 1,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch mss_axi_crypto_clk = {
+	.halt_reg = 0x20cc,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x20cc,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "mss_axi_crypto_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.fw_name = "gcc_mss_mfab_axis",
+			},
+			.num_parents = 1,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static const struct regmap_config mss_regmap_config = {
+	.reg_bits	= 32,
+	.reg_stride	= 4,
+	.val_bits	= 32,
+	.fast_io	= true,
+	.max_register	= 0x41aa0cc,
+};
+
+static struct clk_regmap *mss_sc7180_clocks[] = {
+	[MSS_AXI_CRYPTO_CLK] = &mss_axi_crypto_clk.clkr,
+	[MSS_AXI_NAV_CLK] = &mss_axi_nav_clk.clkr,
+};
+
+static const struct qcom_cc_desc mss_sc7180_desc = {
+	.config = &mss_regmap_config,
+	.clks = mss_sc7180_clocks,
+	.num_clks = ARRAY_SIZE(mss_sc7180_clocks),
+};
+
+static int mss_sc7180_probe(struct platform_device *pdev)
+{
+	int ret;
+
+	pm_runtime_enable(&pdev->dev);
+	ret = pm_clk_create(&pdev->dev);
+	if (ret)
+		goto disable_pm_runtime;
+
+	ret = pm_clk_add(&pdev->dev, "cfg_ahb");
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to acquire iface clock\n");
+		goto destroy_pm_clk;
+	}
+
+	ret = qcom_cc_probe(pdev, &mss_sc7180_desc);
+	if (ret < 0)
+		goto destroy_pm_clk;
+
+	return 0;
+
+destroy_pm_clk:
+	pm_clk_destroy(&pdev->dev);
+
+disable_pm_runtime:
+	pm_runtime_disable(&pdev->dev);
+
+	return ret;
+}
+
+static int mss_sc7180_remove(struct platform_device *pdev)
+{
+	pm_clk_destroy(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
+	return 0;
+}
+
+static const struct dev_pm_ops mss_sc7180_pm_ops = {
+	SET_RUNTIME_PM_OPS(pm_clk_suspend, pm_clk_resume, NULL)
+};
+
+static const struct of_device_id mss_sc7180_match_table[] = {
+	{ .compatible = "qcom,sc7180-mss" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, mss_sc7180_match_table);
+
+static struct platform_driver mss_sc7180_driver = {
+	.probe		= mss_sc7180_probe,
+	.remove		= mss_sc7180_remove,
+	.driver		= {
+		.name		= "sc7180-mss",
+		.of_match_table = mss_sc7180_match_table,
+		.pm = &mss_sc7180_pm_ops,
+	},
+};
+
+static int __init mss_sc7180_init(void)
+{
+	return platform_driver_register(&mss_sc7180_driver);
+}
+subsys_initcall(mss_sc7180_init);
+
+static void __exit mss_sc7180_exit(void)
+{
+	platform_driver_unregister(&mss_sc7180_driver);
+}
+module_exit(mss_sc7180_exit);
+
+MODULE_DESCRIPTION("QTI MSS SC7180 Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/clk/renesas/Kconfig b/drivers/clk/renesas/Kconfig
index 250d816..ac2dd92 100644
--- a/drivers/clk/renesas/Kconfig
+++ b/drivers/clk/renesas/Kconfig
@@ -20,7 +20,7 @@
 	select CLK_R8A7791 if ARCH_R8A7791 || ARCH_R8A7793
 	select CLK_R8A7792 if ARCH_R8A7792
 	select CLK_R8A7794 if ARCH_R8A7794
-	select CLK_R8A7795 if ARCH_R8A77950 || ARCH_R8A77951 || ARCH_R8A7795
+	select CLK_R8A7795 if ARCH_R8A77950 || ARCH_R8A77951
 	select CLK_R8A77960 if ARCH_R8A77960
 	select CLK_R8A77961 if ARCH_R8A77961
 	select CLK_R8A77965 if ARCH_R8A77965
@@ -161,6 +161,7 @@
 config CLK_RCAR_USB2_CLOCK_SEL
 	bool "Renesas R-Car USB2 clock selector support"
 	depends on ARCH_RENESAS || COMPILE_TEST
+	select RESET_CONTROLLER
 	help
 	  This is a driver for R-Car USB2 clock selector
 
diff --git a/drivers/clk/renesas/r8a7795-cpg-mssr.c b/drivers/clk/renesas/r8a7795-cpg-mssr.c
index fbc8c75..ff5b302 100644
--- a/drivers/clk/renesas/r8a7795-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a7795-cpg-mssr.c
@@ -44,6 +44,7 @@ enum clk_ids {
 	CLK_S3,
 	CLK_SDSRC,
 	CLK_SSPSRC,
+	CLK_RPCSRC,
 	CLK_RINT,
 
 	/* Module Clocks */
@@ -70,6 +71,12 @@ static struct cpg_core_clk r8a7795_core_clks[] __initdata = {
 	DEF_FIXED(".s2",        CLK_S2,            CLK_PLL1_DIV2,  4, 1),
 	DEF_FIXED(".s3",        CLK_S3,            CLK_PLL1_DIV2,  6, 1),
 	DEF_FIXED(".sdsrc",     CLK_SDSRC,         CLK_PLL1_DIV2,  2, 1),
+	DEF_BASE(".rpcsrc",	CLK_RPCSRC, CLK_TYPE_GEN3_RPCSRC, CLK_PLL1),
+
+	DEF_BASE("rpc",		R8A7795_CLK_RPC, CLK_TYPE_GEN3_RPC,
+		 CLK_RPCSRC),
+	DEF_BASE("rpcd2",	R8A7795_CLK_RPCD2, CLK_TYPE_GEN3_RPCD2,
+		 R8A7795_CLK_RPC),
 
 	DEF_GEN3_OSC(".r",      CLK_RINT,          CLK_EXTAL,      32),
 
@@ -242,6 +249,7 @@ static struct mssr_mod_clk r8a7795_mod_clks[] __initdata = {
 	DEF_MOD("can-fd",		 914,	R8A7795_CLK_S3D2),
 	DEF_MOD("can-if1",		 915,	R8A7795_CLK_S3D4),
 	DEF_MOD("can-if0",		 916,	R8A7795_CLK_S3D4),
+	DEF_MOD("rpc-if",		 917,	R8A7795_CLK_RPCD2),
 	DEF_MOD("i2c6",			 918,	R8A7795_CLK_S0D6),
 	DEF_MOD("i2c5",			 919,	R8A7795_CLK_S0D6),
 	DEF_MOD("i2c-dvfs",		 926,	R8A7795_CLK_CP),
diff --git a/drivers/clk/renesas/r8a7796-cpg-mssr.c b/drivers/clk/renesas/r8a7796-cpg-mssr.c
index e8420d3..e8d466d 100644
--- a/drivers/clk/renesas/r8a7796-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a7796-cpg-mssr.c
@@ -46,6 +46,7 @@ enum clk_ids {
 	CLK_S3,
 	CLK_SDSRC,
 	CLK_SSPSRC,
+	CLK_RPCSRC,
 	CLK_RINT,
 
 	/* Module Clocks */
@@ -72,6 +73,12 @@ static const struct cpg_core_clk r8a7796_core_clks[] __initconst = {
 	DEF_FIXED(".s2",        CLK_S2,            CLK_PLL1_DIV2,  4, 1),
 	DEF_FIXED(".s3",        CLK_S3,            CLK_PLL1_DIV2,  6, 1),
 	DEF_FIXED(".sdsrc",     CLK_SDSRC,         CLK_PLL1_DIV2,  2, 1),
+	DEF_BASE(".rpcsrc",	CLK_RPCSRC, CLK_TYPE_GEN3_RPCSRC, CLK_PLL1),
+
+	DEF_BASE("rpc",		R8A7796_CLK_RPC, CLK_TYPE_GEN3_RPC,
+		 CLK_RPCSRC),
+	DEF_BASE("rpcd2",	R8A7796_CLK_RPCD2, CLK_TYPE_GEN3_RPCD2,
+		 R8A7796_CLK_RPC),
 
 	DEF_GEN3_OSC(".r",      CLK_RINT,          CLK_EXTAL,      32),
 
@@ -105,6 +112,7 @@ static const struct cpg_core_clk r8a7796_core_clks[] __initconst = {
 	DEF_GEN3_SD("sd3",      R8A7796_CLK_SD3,   CLK_SDSRC,     0x26c),
 
 	DEF_FIXED("cl",         R8A7796_CLK_CL,    CLK_PLL1_DIV2, 48, 1),
+	DEF_FIXED("cr",         R8A7796_CLK_CR,    CLK_PLL1_DIV4,  2, 1),
 	DEF_FIXED("cp",         R8A7796_CLK_CP,    CLK_EXTAL,      2, 1),
 	DEF_FIXED("cpex",       R8A7796_CLK_CPEX,  CLK_EXTAL,      2, 1),
 
@@ -132,6 +140,7 @@ static struct mssr_mod_clk r8a7796_mod_clks[] __initdata = {
 	DEF_MOD("sys-dmac2",		 217,	R8A7796_CLK_S3D1),
 	DEF_MOD("sys-dmac1",		 218,	R8A7796_CLK_S3D1),
 	DEF_MOD("sys-dmac0",		 219,	R8A7796_CLK_S0D3),
+	DEF_MOD("sceg-pub",		 229,	R8A7796_CLK_CR),
 	DEF_MOD("cmt3",			 300,	R8A7796_CLK_R),
 	DEF_MOD("cmt2",			 301,	R8A7796_CLK_R),
 	DEF_MOD("cmt1",			 302,	R8A7796_CLK_R),
@@ -215,6 +224,7 @@ static struct mssr_mod_clk r8a7796_mod_clks[] __initdata = {
 	DEF_MOD("can-fd",		 914,	R8A7796_CLK_S3D2),
 	DEF_MOD("can-if1",		 915,	R8A7796_CLK_S3D4),
 	DEF_MOD("can-if0",		 916,	R8A7796_CLK_S3D4),
+	DEF_MOD("rpc-if",		 917,	R8A7796_CLK_RPCD2),
 	DEF_MOD("i2c6",			 918,	R8A7796_CLK_S0D6),
 	DEF_MOD("i2c5",			 919,	R8A7796_CLK_S0D6),
 	DEF_MOD("i2c-dvfs",		 926,	R8A7796_CLK_CP),
diff --git a/drivers/clk/renesas/r8a77965-cpg-mssr.c b/drivers/clk/renesas/r8a77965-cpg-mssr.c
index b3af4da..7a05a2f 100644
--- a/drivers/clk/renesas/r8a77965-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a77965-cpg-mssr.c
@@ -43,6 +43,7 @@ enum clk_ids {
 	CLK_S3,
 	CLK_SDSRC,
 	CLK_SSPSRC,
+	CLK_RPCSRC,
 	CLK_RINT,
 
 	/* Module Clocks */
@@ -68,6 +69,12 @@ static const struct cpg_core_clk r8a77965_core_clks[] __initconst = {
 	DEF_FIXED(".s2",	CLK_S2,			CLK_PLL1_DIV2,	4, 1),
 	DEF_FIXED(".s3",	CLK_S3,			CLK_PLL1_DIV2,	6, 1),
 	DEF_FIXED(".sdsrc",	CLK_SDSRC,		CLK_PLL1_DIV2,	2, 1),
+	DEF_BASE(".rpcsrc",	CLK_RPCSRC, CLK_TYPE_GEN3_RPCSRC, CLK_PLL1),
+
+	DEF_BASE("rpc",		R8A77965_CLK_RPC, CLK_TYPE_GEN3_RPC,
+		 CLK_RPCSRC),
+	DEF_BASE("rpcd2",	R8A77965_CLK_RPCD2, CLK_TYPE_GEN3_RPCD2,
+		 R8A77965_CLK_RPC),
 
 	DEF_GEN3_OSC(".r",	CLK_RINT,		CLK_EXTAL,	32),
 
@@ -99,7 +106,8 @@ static const struct cpg_core_clk r8a77965_core_clks[] __initconst = {
 	DEF_GEN3_SD("sd2",	R8A77965_CLK_SD2,	CLK_SDSRC,	0x268),
 	DEF_GEN3_SD("sd3",	R8A77965_CLK_SD3,	CLK_SDSRC,	0x26c),
 
-	DEF_FIXED("cl",		R8A77965_CLK_CL,	CLK_PLL1_DIV2,	48, 1),
+	DEF_FIXED("cl",		R8A77965_CLK_CL,	CLK_PLL1_DIV2, 48, 1),
+	DEF_FIXED("cr",         R8A77965_CLK_CR,	CLK_PLL1_DIV4,  2, 1),
 	DEF_FIXED("cp",		R8A77965_CLK_CP,	CLK_EXTAL,	2, 1),
 	DEF_FIXED("cpex",	R8A77965_CLK_CPEX,	CLK_EXTAL,	2, 1),
 
@@ -127,6 +135,7 @@ static const struct mssr_mod_clk r8a77965_mod_clks[] __initconst = {
 	DEF_MOD("sys-dmac2",		217,	R8A77965_CLK_S3D1),
 	DEF_MOD("sys-dmac1",		218,	R8A77965_CLK_S3D1),
 	DEF_MOD("sys-dmac0",		219,	R8A77965_CLK_S0D3),
+	DEF_MOD("sceg-pub",		229,	R8A77965_CLK_CR),
 
 	DEF_MOD("cmt3",			300,	R8A77965_CLK_R),
 	DEF_MOD("cmt2",			301,	R8A77965_CLK_R),
@@ -215,6 +224,7 @@ static const struct mssr_mod_clk r8a77965_mod_clks[] __initconst = {
 	DEF_MOD("can-fd",		914,	R8A77965_CLK_S3D2),
 	DEF_MOD("can-if1",		915,	R8A77965_CLK_S3D4),
 	DEF_MOD("can-if0",		916,	R8A77965_CLK_S3D4),
+	DEF_MOD("rpc-if",		917,	R8A77965_CLK_RPCD2),
 	DEF_MOD("i2c6",			918,	R8A77965_CLK_S0D6),
 	DEF_MOD("i2c5",			919,	R8A77965_CLK_S0D6),
 	DEF_MOD("i2c-dvfs",		926,	R8A77965_CLK_CP),
diff --git a/drivers/clk/renesas/r8a77990-cpg-mssr.c b/drivers/clk/renesas/r8a77990-cpg-mssr.c
index ceabf55c..8eda2e3 100644
--- a/drivers/clk/renesas/r8a77990-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a77990-cpg-mssr.c
@@ -105,6 +105,7 @@ static const struct cpg_core_clk r8a77990_core_clks[] __initconst = {
 	DEF_GEN3_SD("sd3",     R8A77990_CLK_SD3,   CLK_SDSRC,	  0x026c),
 
 	DEF_FIXED("cl",        R8A77990_CLK_CL,    CLK_PLL1,      48, 1),
+	DEF_FIXED("cr",        R8A77990_CLK_CR,    CLK_PLL1D2,     2, 1),
 	DEF_FIXED("cp",        R8A77990_CLK_CP,    CLK_EXTAL,      2, 1),
 	DEF_FIXED("cpex",      R8A77990_CLK_CPEX,  CLK_EXTAL,      4, 1),
 
@@ -135,6 +136,7 @@ static const struct mssr_mod_clk r8a77990_mod_clks[] __initconst = {
 	DEF_MOD("sys-dmac2",		 217,	R8A77990_CLK_S3D1),
 	DEF_MOD("sys-dmac1",		 218,	R8A77990_CLK_S3D1),
 	DEF_MOD("sys-dmac0",		 219,	R8A77990_CLK_S3D1),
+	DEF_MOD("sceg-pub",		 229,	R8A77990_CLK_CR),
 
 	DEF_MOD("cmt3",			 300,	R8A77990_CLK_R),
 	DEF_MOD("cmt2",			 301,	R8A77990_CLK_R),
diff --git a/drivers/clk/renesas/r8a77995-cpg-mssr.c b/drivers/clk/renesas/r8a77995-cpg-mssr.c
index 962bb33..056ebf3 100644
--- a/drivers/clk/renesas/r8a77995-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a77995-cpg-mssr.c
@@ -91,6 +91,7 @@ static const struct cpg_core_clk r8a77995_core_clks[] __initconst = {
 	DEF_FIXED("s3d4",      R8A77995_CLK_S3D4,  CLK_S3,         4, 1),
 
 	DEF_FIXED("cl",        R8A77995_CLK_CL,    CLK_PLL1,      48, 1),
+	DEF_FIXED("cr",        R8A77995_CLK_CR,    CLK_PLL1D2,     2, 1),
 	DEF_FIXED("cp",        R8A77995_CLK_CP,    CLK_EXTAL,      2, 1),
 	DEF_FIXED("cpex",      R8A77995_CLK_CPEX,  CLK_EXTAL,      4, 1),
 
@@ -122,6 +123,7 @@ static const struct mssr_mod_clk r8a77995_mod_clks[] __initconst = {
 	DEF_MOD("sys-dmac2",		 217,	R8A77995_CLK_S3D1),
 	DEF_MOD("sys-dmac1",		 218,	R8A77995_CLK_S3D1),
 	DEF_MOD("sys-dmac0",		 219,	R8A77995_CLK_S3D1),
+	DEF_MOD("sceg-pub",		 229,	R8A77995_CLK_CR),
 	DEF_MOD("cmt3",			 300,	R8A77995_CLK_R),
 	DEF_MOD("cmt2",			 301,	R8A77995_CLK_R),
 	DEF_MOD("cmt1",			 302,	R8A77995_CLK_R),
diff --git a/drivers/clk/renesas/rcar-usb2-clock-sel.c b/drivers/clk/renesas/rcar-usb2-clock-sel.c
index b97f5f9..d4c0298 100644
--- a/drivers/clk/renesas/rcar-usb2-clock-sel.c
+++ b/drivers/clk/renesas/rcar-usb2-clock-sel.c
@@ -19,6 +19,7 @@
 #include <linux/platform_device.h>
 #include <linux/pm.h>
 #include <linux/pm_runtime.h>
+#include <linux/reset.h>
 #include <linux/slab.h>
 
 #define USB20_CLKSET0		0x00
@@ -26,9 +27,16 @@
 #define CLKSET0_PRIVATE		BIT(0)
 #define CLKSET0_EXTAL_ONLY	(CLKSET0_INTCLK_EN | CLKSET0_PRIVATE)
 
+static const struct clk_bulk_data rcar_usb2_clocks[] = {
+	{ .id = "ehci_ohci", },
+	{ .id = "hs-usb-if", },
+};
+
 struct usb2_clock_sel_priv {
 	void __iomem *base;
 	struct clk_hw hw;
+	struct clk_bulk_data clks[ARRAY_SIZE(rcar_usb2_clocks)];
+	struct reset_control *rsts;
 	bool extal;
 	bool xtal;
 };
@@ -53,14 +61,32 @@ static void usb2_clock_sel_disable_extal_only(struct usb2_clock_sel_priv *priv)
 
 static int usb2_clock_sel_enable(struct clk_hw *hw)
 {
-	usb2_clock_sel_enable_extal_only(to_priv(hw));
+	struct usb2_clock_sel_priv *priv = to_priv(hw);
+	int ret;
+
+	ret = reset_control_deassert(priv->rsts);
+	if (ret)
+		return ret;
+
+	ret = clk_bulk_prepare_enable(ARRAY_SIZE(priv->clks), priv->clks);
+	if (ret) {
+		reset_control_assert(priv->rsts);
+		return ret;
+	}
+
+	usb2_clock_sel_enable_extal_only(priv);
 
 	return 0;
 }
 
 static void usb2_clock_sel_disable(struct clk_hw *hw)
 {
-	usb2_clock_sel_disable_extal_only(to_priv(hw));
+	struct usb2_clock_sel_priv *priv = to_priv(hw);
+
+	usb2_clock_sel_disable_extal_only(priv);
+
+	clk_bulk_disable_unprepare(ARRAY_SIZE(priv->clks), priv->clks);
+	reset_control_assert(priv->rsts);
 }
 
 /*
@@ -119,6 +145,7 @@ static int rcar_usb2_clock_sel_probe(struct platform_device *pdev)
 	struct usb2_clock_sel_priv *priv;
 	struct clk *clk;
 	struct clk_init_data init;
+	int ret;
 
 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
@@ -128,6 +155,15 @@ static int rcar_usb2_clock_sel_probe(struct platform_device *pdev)
 	if (IS_ERR(priv->base))
 		return PTR_ERR(priv->base);
 
+	memcpy(priv->clks, rcar_usb2_clocks, sizeof(priv->clks));
+	ret = devm_clk_bulk_get(dev, ARRAY_SIZE(priv->clks), priv->clks);
+	if (ret < 0)
+		return ret;
+
+	priv->rsts = devm_reset_control_array_get(dev, true, false);
+	if (IS_ERR(priv->rsts))
+		return PTR_ERR(priv->rsts);
+
 	pm_runtime_enable(dev);
 	pm_runtime_get_sync(dev);
 
diff --git a/drivers/clk/rockchip/clk-mmc-phase.c b/drivers/clk/rockchip/clk-mmc-phase.c
index 4abe7ff..975454a 100644
--- a/drivers/clk/rockchip/clk-mmc-phase.c
+++ b/drivers/clk/rockchip/clk-mmc-phase.c
@@ -51,9 +51,9 @@ static int rockchip_mmc_get_phase(struct clk_hw *hw)
 	u16 degrees;
 	u32 delay_num = 0;
 
-	/* See the comment for rockchip_mmc_set_phase below */
+	/* Constant signal, no measurable phase shift */
 	if (!rate)
-		return -EINVAL;
+		return 0;
 
 	raw_value = readl(mmc_clock->reg) >> (mmc_clock->shift);
 
diff --git a/drivers/clk/samsung/clk.c b/drivers/clk/samsung/clk.c
index dad3130..1949ae7 100644
--- a/drivers/clk/samsung/clk.c
+++ b/drivers/clk/samsung/clk.c
@@ -356,10 +356,6 @@ struct samsung_clk_provider * __init samsung_cmu_register_one(
 	}
 
 	ctx = samsung_clk_init(np, reg_base, cmu->nr_clk_ids);
-	if (!ctx) {
-		panic("%s: unable to allocate ctx\n", __func__);
-		return ctx;
-	}
 
 	if (cmu->pll_clks)
 		samsung_clk_register_pll(ctx, cmu->pll_clks, cmu->nr_pll_clks,
diff --git a/drivers/clk/socfpga/clk-gate-s10.c b/drivers/clk/socfpga/clk-gate-s10.c
index 54a464f..8be4722 100644
--- a/drivers/clk/socfpga/clk-gate-s10.c
+++ b/drivers/clk/socfpga/clk-gate-s10.c
@@ -65,54 +65,49 @@ static const struct clk_ops dbgclk_ops = {
 	.get_parent = socfpga_gate_get_parent,
 };
 
-struct clk *s10_register_gate(const char *name, const char *parent_name,
-			      const char * const *parent_names,
-			      u8 num_parents, unsigned long flags,
-			      void __iomem *regbase, unsigned long gate_reg,
-			      unsigned long gate_idx, unsigned long div_reg,
-			      unsigned long div_offset, u8 div_width,
-			      unsigned long bypass_reg, u8 bypass_shift,
-			      u8 fixed_div)
+struct clk *s10_register_gate(const struct stratix10_gate_clock *clks, void __iomem *regbase)
 {
 	struct clk *clk;
 	struct socfpga_gate_clk *socfpga_clk;
 	struct clk_init_data init;
+	const char * const *parent_names = clks->parent_names;
+	const char *parent_name = clks->parent_name;
 
 	socfpga_clk = kzalloc(sizeof(*socfpga_clk), GFP_KERNEL);
 	if (!socfpga_clk)
 		return NULL;
 
-	socfpga_clk->hw.reg = regbase + gate_reg;
-	socfpga_clk->hw.bit_idx = gate_idx;
+	socfpga_clk->hw.reg = regbase + clks->gate_reg;
+	socfpga_clk->hw.bit_idx = clks->gate_idx;
 
 	gateclk_ops.enable = clk_gate_ops.enable;
 	gateclk_ops.disable = clk_gate_ops.disable;
 
-	socfpga_clk->fixed_div = fixed_div;
+	socfpga_clk->fixed_div = clks->fixed_div;
 
-	if (div_reg)
-		socfpga_clk->div_reg = regbase + div_reg;
+	if (clks->div_reg)
+		socfpga_clk->div_reg = regbase + clks->div_reg;
 	else
 		socfpga_clk->div_reg = NULL;
 
-	socfpga_clk->width = div_width;
-	socfpga_clk->shift = div_offset;
+	socfpga_clk->width = clks->div_width;
+	socfpga_clk->shift = clks->div_offset;
 
-	if (bypass_reg)
-		socfpga_clk->bypass_reg = regbase + bypass_reg;
+	if (clks->bypass_reg)
+		socfpga_clk->bypass_reg = regbase + clks->bypass_reg;
 	else
 		socfpga_clk->bypass_reg = NULL;
-	socfpga_clk->bypass_shift = bypass_shift;
+	socfpga_clk->bypass_shift = clks->bypass_shift;
 
-	if (streq(name, "cs_pdbg_clk"))
+	if (streq(clks->name, "cs_pdbg_clk"))
 		init.ops = &dbgclk_ops;
 	else
 		init.ops = &gateclk_ops;
 
-	init.name = name;
-	init.flags = flags;
+	init.name = clks->name;
+	init.flags = clks->flags;
 
-	init.num_parents = num_parents;
+	init.num_parents = clks->num_parents;
 	init.parent_names = parent_names ? parent_names : &parent_name;
 	socfpga_clk->hw.hw.init = &init;
 
@@ -121,6 +116,5 @@ struct clk *s10_register_gate(const char *name, const char *parent_name,
 		kfree(socfpga_clk);
 		return NULL;
 	}
-
 	return clk;
 }
diff --git a/drivers/clk/socfpga/clk-periph-s10.c b/drivers/clk/socfpga/clk-periph-s10.c
index 1a191ee..dd6d405 100644
--- a/drivers/clk/socfpga/clk-periph-s10.c
+++ b/drivers/clk/socfpga/clk-periph-s10.c
@@ -73,26 +73,27 @@ static const struct clk_ops peri_cnt_clk_ops = {
 	.get_parent = clk_periclk_get_parent,
 };
 
-struct clk *s10_register_periph(const char *name, const char *parent_name,
-				const char * const *parent_names,
-				u8 num_parents, unsigned long flags,
-				void __iomem *reg, unsigned long offset)
+struct clk *s10_register_periph(const struct stratix10_perip_c_clock *clks,
+				void __iomem *reg)
 {
 	struct clk *clk;
 	struct socfpga_periph_clk *periph_clk;
 	struct clk_init_data init;
+	const char *name = clks->name;
+	const char *parent_name = clks->parent_name;
+	const char * const *parent_names = clks->parent_names;
 
 	periph_clk = kzalloc(sizeof(*periph_clk), GFP_KERNEL);
 	if (WARN_ON(!periph_clk))
 		return NULL;
 
-	periph_clk->hw.reg = reg + offset;
+	periph_clk->hw.reg = reg + clks->offset;
 
 	init.name = name;
 	init.ops = &peri_c_clk_ops;
-	init.flags = flags;
+	init.flags = clks->flags;
 
-	init.num_parents = num_parents;
+	init.num_parents = clks->num_parents;
 	init.parent_names = parent_names ? parent_names : &parent_name;
 
 	periph_clk->hw.hw.init = &init;
@@ -105,38 +106,37 @@ struct clk *s10_register_periph(const char *name, const char *parent_name,
 	return clk;
 }
 
-struct clk *s10_register_cnt_periph(const char *name, const char *parent_name,
-				    const char * const *parent_names,
-				    u8 num_parents, unsigned long flags,
-				    void __iomem *regbase, unsigned long offset,
-				    u8 fixed_divider, unsigned long bypass_reg,
-				    unsigned long bypass_shift)
+struct clk *s10_register_cnt_periph(const struct stratix10_perip_cnt_clock *clks,
+				    void __iomem *regbase)
 {
 	struct clk *clk;
 	struct socfpga_periph_clk *periph_clk;
 	struct clk_init_data init;
+	const char *name = clks->name;
+	const char *parent_name = clks->parent_name;
+	const char * const *parent_names = clks->parent_names;
 
 	periph_clk = kzalloc(sizeof(*periph_clk), GFP_KERNEL);
 	if (WARN_ON(!periph_clk))
 		return NULL;
 
-	if (offset)
-		periph_clk->hw.reg = regbase + offset;
+	if (clks->offset)
+		periph_clk->hw.reg = regbase + clks->offset;
 	else
 		periph_clk->hw.reg = NULL;
 
-	if (bypass_reg)
-		periph_clk->bypass_reg = regbase + bypass_reg;
+	if (clks->bypass_reg)
+		periph_clk->bypass_reg = regbase + clks->bypass_reg;
 	else
 		periph_clk->bypass_reg = NULL;
-	periph_clk->bypass_shift = bypass_shift;
-	periph_clk->fixed_div = fixed_divider;
+	periph_clk->bypass_shift = clks->bypass_shift;
+	periph_clk->fixed_div = clks->fixed_divider;
 
 	init.name = name;
 	init.ops = &peri_cnt_clk_ops;
-	init.flags = flags;
+	init.flags = clks->flags;
 
-	init.num_parents = num_parents;
+	init.num_parents = clks->num_parents;
 	init.parent_names = parent_names ? parent_names : &parent_name;
 
 	periph_clk->hw.hw.init = &init;
diff --git a/drivers/clk/socfpga/clk-pll-s10.c b/drivers/clk/socfpga/clk-pll-s10.c
index 4705eb5..a301bb2 100644
--- a/drivers/clk/socfpga/clk-pll-s10.c
+++ b/drivers/clk/socfpga/clk-pll-s10.c
@@ -39,7 +39,9 @@ static unsigned long clk_pll_recalc_rate(struct clk_hw *hwclk,
 	/* read VCO1 reg for numerator and denominator */
 	reg = readl(socfpgaclk->hw.reg);
 	refdiv = (reg & SOCFPGA_PLL_REFDIV_MASK) >> SOCFPGA_PLL_REFDIV_SHIFT;
-	vco_freq = (unsigned long long)parent_rate / refdiv;
+
+	vco_freq = parent_rate;
+	do_div(vco_freq, refdiv);
 
 	/* Read mdiv and fdiv from the fdbck register */
 	reg = readl(socfpgaclk->hw.reg + 0x4);
@@ -108,19 +110,20 @@ static struct clk_ops clk_boot_ops = {
 	.prepare = clk_pll_prepare,
 };
 
-struct clk *s10_register_pll(const char *name, const char * const *parent_names,
-				    u8 num_parents, unsigned long flags,
-				    void __iomem *reg, unsigned long offset)
+struct clk *s10_register_pll(const struct stratix10_pll_clock *clks,
+			     void __iomem *reg)
 {
 	struct clk *clk;
 	struct socfpga_pll *pll_clk;
 	struct clk_init_data init;
+	const char *name = clks->name;
+	const char * const *parent_names = clks->parent_names;
 
 	pll_clk = kzalloc(sizeof(*pll_clk), GFP_KERNEL);
 	if (WARN_ON(!pll_clk))
 		return NULL;
 
-	pll_clk->hw.reg = reg + offset;
+	pll_clk->hw.reg = reg + clks->offset;
 
 	if (streq(name, SOCFPGA_BOOT_CLK))
 		init.ops = &clk_boot_ops;
@@ -128,9 +131,9 @@ struct clk *s10_register_pll(const char *name, const char * const *parent_names,
 		init.ops = &clk_pll_ops;
 
 	init.name = name;
-	init.flags = flags;
+	init.flags = clks->flags;
 
-	init.num_parents = num_parents;
+	init.num_parents = clks->num_parents;
 	init.parent_names = parent_names;
 	pll_clk->hw.hw.init = &init;
 
diff --git a/drivers/clk/socfpga/clk-s10.c b/drivers/clk/socfpga/clk-s10.c
index 993f3a7..dea7c6c 100644
--- a/drivers/clk/socfpga/clk-s10.c
+++ b/drivers/clk/socfpga/clk-s10.c
@@ -177,9 +177,7 @@ static int s10_clk_register_c_perip(const struct stratix10_perip_c_clock *clks,
 	int i;
 
 	for (i = 0; i < nums; i++) {
-		clk = s10_register_periph(clks[i].name, clks[i].parent_name,
-					  clks[i].parent_names, clks[i].num_parents,
-					  clks[i].flags, base, clks[i].offset);
+		clk = s10_register_periph(&clks[i], base);
 		if (IS_ERR(clk)) {
 			pr_err("%s: failed to register clock %s\n",
 			       __func__, clks[i].name);
@@ -198,14 +196,7 @@ static int s10_clk_register_cnt_perip(const struct stratix10_perip_cnt_clock *cl
 	int i;
 
 	for (i = 0; i < nums; i++) {
-		clk = s10_register_cnt_periph(clks[i].name, clks[i].parent_name,
-					      clks[i].parent_names,
-					      clks[i].num_parents,
-					      clks[i].flags, base,
-					      clks[i].offset,
-					      clks[i].fixed_divider,
-					      clks[i].bypass_reg,
-					      clks[i].bypass_shift);
+		clk = s10_register_cnt_periph(&clks[i], base);
 		if (IS_ERR(clk)) {
 			pr_err("%s: failed to register clock %s\n",
 			       __func__, clks[i].name);
@@ -225,16 +216,7 @@ static int s10_clk_register_gate(const struct stratix10_gate_clock *clks,
 	int i;
 
 	for (i = 0; i < nums; i++) {
-		clk = s10_register_gate(clks[i].name, clks[i].parent_name,
-					clks[i].parent_names,
-					clks[i].num_parents,
-					clks[i].flags, base,
-					clks[i].gate_reg,
-					clks[i].gate_idx, clks[i].div_reg,
-					clks[i].div_offset, clks[i].div_width,
-					clks[i].bypass_reg,
-					clks[i].bypass_shift,
-					clks[i].fixed_div);
+		clk = s10_register_gate(&clks[i], base);
 		if (IS_ERR(clk)) {
 			pr_err("%s: failed to register clock %s\n",
 			       __func__, clks[i].name);
@@ -254,10 +236,7 @@ static int s10_clk_register_pll(const struct stratix10_pll_clock *clks,
 	int i;
 
 	for (i = 0; i < nums; i++) {
-		clk = s10_register_pll(clks[i].name, clks[i].parent_names,
-				    clks[i].num_parents,
-				    clks[i].flags, base,
-				    clks[i].offset);
+		clk = s10_register_pll(&clks[i], base);
 		if (IS_ERR(clk)) {
 			pr_err("%s: failed to register clock %s\n",
 			       __func__, clks[i].name);
diff --git a/drivers/clk/socfpga/stratix10-clk.h b/drivers/clk/socfpga/stratix10-clk.h
index e8e1219..fcabef4 100644
--- a/drivers/clk/socfpga/stratix10-clk.h
+++ b/drivers/clk/socfpga/stratix10-clk.h
@@ -60,21 +60,12 @@ struct stratix10_gate_clock {
 	u8			fixed_div;
 };
 
-struct clk *s10_register_pll(const char *, const char *const *, u8,
-			     unsigned long, void __iomem *, unsigned long);
-
-struct clk *s10_register_periph(const char *, const char *,
-				const char * const *, u8, unsigned long,
-				void __iomem *, unsigned long);
-struct clk *s10_register_cnt_periph(const char *, const char *,
-				    const char * const *, u8,
-				    unsigned long, void __iomem *,
-				    unsigned long, u8, unsigned long,
-				    unsigned long);
-struct clk *s10_register_gate(const char *, const char *,
-			      const char * const *, u8,
-			      unsigned long, void __iomem *,
-			      unsigned long, unsigned long,
-			      unsigned long, unsigned long, u8,
-			      unsigned long, u8, u8);
+struct clk *s10_register_pll(const struct stratix10_pll_clock *,
+			     void __iomem *);
+struct clk *s10_register_periph(const struct stratix10_perip_c_clock *,
+				void __iomem *);
+struct clk *s10_register_cnt_periph(const struct stratix10_perip_cnt_clock *,
+				    void __iomem *);
+struct clk *s10_register_gate(const struct stratix10_gate_clock *,
+			      void __iomem *);
 #endif	/* __STRATIX10_CLK_H */
diff --git a/drivers/clk/sprd/Kconfig b/drivers/clk/sprd/Kconfig
index 3c219af..e18c80f 100644
--- a/drivers/clk/sprd/Kconfig
+++ b/drivers/clk/sprd/Kconfig
@@ -13,4 +13,12 @@
 	tristate "Support for the Spreadtrum SC9860 clocks"
 	depends on (ARM64 && ARCH_SPRD) || COMPILE_TEST
 	default ARM64 && ARCH_SPRD
+
+config SPRD_SC9863A_CLK
+	tristate "Support for the Spreadtrum SC9863A clocks"
+	depends on (ARM64 && ARCH_SPRD) || COMPILE_TEST
+	default ARM64 && ARCH_SPRD
+	help
+	  Support for the global clock controller on sc9863a devices.
+	  Say Y if you want to use peripheral devices on sc9863a SoC.
 endif
diff --git a/drivers/clk/sprd/Makefile b/drivers/clk/sprd/Makefile
index d4c0078..41d90e0 100644
--- a/drivers/clk/sprd/Makefile
+++ b/drivers/clk/sprd/Makefile
@@ -10,3 +10,4 @@
 
 ## SoC support
 obj-$(CONFIG_SPRD_SC9860_CLK)	+= sc9860-clk.o
+obj-$(CONFIG_SPRD_SC9863A_CLK)	+= sc9863a-clk.o
diff --git a/drivers/clk/sprd/common.c b/drivers/clk/sprd/common.c
index c0af477..d620bbb 100644
--- a/drivers/clk/sprd/common.c
+++ b/drivers/clk/sprd/common.c
@@ -40,7 +40,8 @@ int sprd_clk_regmap_init(struct platform_device *pdev,
 			 const struct sprd_clk_desc *desc)
 {
 	void __iomem *base;
-	struct device_node *node = pdev->dev.of_node;
+	struct device *dev = &pdev->dev;
+	struct device_node *node = dev->of_node;
 	struct regmap *regmap;
 
 	if (of_find_property(node, "sprd,syscon", NULL)) {
@@ -49,6 +50,13 @@ int sprd_clk_regmap_init(struct platform_device *pdev,
 			pr_err("%s: failed to get syscon regmap\n", __func__);
 			return PTR_ERR(regmap);
 		}
+	} else if (of_device_is_compatible(of_get_parent(dev->of_node),
+			   "syscon")) {
+		regmap = device_node_to_regmap(of_get_parent(dev->of_node));
+		if (IS_ERR(regmap)) {
+			dev_err(dev, "failed to get regmap from its parent.\n");
+			return PTR_ERR(regmap);
+		}
 	} else {
 		base = devm_platform_ioremap_resource(pdev, 0);
 		if (IS_ERR(base))
diff --git a/drivers/clk/sprd/composite.h b/drivers/clk/sprd/composite.h
index 04ab3f5..adbabbe 100644
--- a/drivers/clk/sprd/composite.h
+++ b/drivers/clk/sprd/composite.h
@@ -18,26 +18,43 @@ struct sprd_comp {
 	struct sprd_clk_common	common;
 };
 
-#define SPRD_COMP_CLK_TABLE(_struct, _name, _parent, _reg, _table,	\
-			_mshift, _mwidth, _dshift, _dwidth, _flags)	\
+#define SPRD_COMP_CLK_HW_INIT_FN(_struct, _name, _parent, _reg, _table,	\
+				 _mshift, _mwidth, _dshift, _dwidth,	\
+				 _flags, _fn)				\
 	struct sprd_comp _struct = {					\
 		.mux	= _SPRD_MUX_CLK(_mshift, _mwidth, _table),	\
 		.div	= _SPRD_DIV_CLK(_dshift, _dwidth),		\
 		.common = {						\
 			.regmap		= NULL,				\
 			.reg		= _reg,				\
-			.hw.init = CLK_HW_INIT_PARENTS(_name,		\
-						       _parent,		\
-						       &sprd_comp_ops,	\
-						       _flags),		\
+			.hw.init = _fn(_name, _parent,			\
+				       &sprd_comp_ops, _flags),		\
 			 }						\
 	}
 
-#define SPRD_COMP_CLK(_struct, _name, _parent, _reg, _mshift,	\
-			_mwidth, _dshift, _dwidth, _flags)	\
-	SPRD_COMP_CLK_TABLE(_struct, _name, _parent, _reg,	\
-			    NULL, _mshift, _mwidth,		\
-			    _dshift, _dwidth, _flags)
+#define SPRD_COMP_CLK_TABLE(_struct, _name, _parent, _reg, _table,	\
+			    _mshift, _mwidth, _dshift, _dwidth, _flags)	\
+	SPRD_COMP_CLK_HW_INIT_FN(_struct, _name, _parent, _reg, _table,	\
+				 _mshift, _mwidth, _dshift, _dwidth,	\
+				 _flags, CLK_HW_INIT_PARENTS)
+
+#define SPRD_COMP_CLK(_struct, _name, _parent, _reg, _mshift,		\
+		      _mwidth, _dshift, _dwidth, _flags)		\
+	SPRD_COMP_CLK_TABLE(_struct, _name, _parent, _reg, NULL,	\
+			    _mshift, _mwidth, _dshift, _dwidth, _flags)
+
+#define SPRD_COMP_CLK_DATA_TABLE(_struct, _name, _parent, _reg, _table,	\
+				 _mshift, _mwidth, _dshift,		\
+				 _dwidth, _flags)			\
+	SPRD_COMP_CLK_HW_INIT_FN(_struct, _name, _parent, _reg, _table,	\
+				 _mshift, _mwidth, _dshift, _dwidth,	\
+				 _flags, CLK_HW_INIT_PARENTS_DATA)
+
+#define SPRD_COMP_CLK_DATA(_struct, _name, _parent, _reg, _mshift,	\
+			   _mwidth, _dshift, _dwidth, _flags)		\
+	SPRD_COMP_CLK_DATA_TABLE(_struct, _name, _parent, _reg,	NULL,	\
+				 _mshift, _mwidth, _dshift, _dwidth,	\
+				 _flags)
 
 static inline struct sprd_comp *hw_to_sprd_comp(const struct clk_hw *hw)
 {
diff --git a/drivers/clk/sprd/div.h b/drivers/clk/sprd/div.h
index 87510e3..6acfe6b 100644
--- a/drivers/clk/sprd/div.h
+++ b/drivers/clk/sprd/div.h
@@ -35,20 +35,28 @@ struct sprd_div {
 	struct sprd_clk_common	common;
 };
 
-#define SPRD_DIV_CLK(_struct, _name, _parent, _reg,			\
-			_shift, _width, _flags)				\
+#define SPRD_DIV_CLK_HW_INIT_FN(_struct, _name, _parent, _reg,		\
+				_shift, _width, _flags, _fn)		\
 	struct sprd_div _struct = {					\
 		.div	= _SPRD_DIV_CLK(_shift, _width),		\
 		.common	= {						\
 			.regmap		= NULL,				\
 			.reg		= _reg,				\
-			.hw.init	= CLK_HW_INIT(_name,		\
-						      _parent,		\
-						      &sprd_div_ops,	\
-						      _flags),		\
+			.hw.init	= _fn(_name, _parent,		\
+					      &sprd_div_ops, _flags),	\
 		}							\
 	}
 
+#define SPRD_DIV_CLK(_struct, _name, _parent, _reg,			\
+		     _shift, _width, _flags)				\
+	SPRD_DIV_CLK_HW_INIT_FN(_struct, _name, _parent, _reg,		\
+				_shift, _width, _flags, CLK_HW_INIT)
+
+#define SPRD_DIV_CLK_HW(_struct, _name, _parent, _reg,			\
+			_shift, _width, _flags)				\
+	SPRD_DIV_CLK_HW_INIT_FN(_struct, _name, _parent, _reg,		\
+				_shift, _width, _flags, CLK_HW_INIT_HW)
+
 static inline struct sprd_div *hw_to_sprd_div(const struct clk_hw *hw)
 {
 	struct sprd_clk_common *common = hw_to_sprd_clk_common(hw);
diff --git a/drivers/clk/sprd/gate.c b/drivers/clk/sprd/gate.c
index f59d193..574cfc1 100644
--- a/drivers/clk/sprd/gate.c
+++ b/drivers/clk/sprd/gate.c
@@ -79,6 +79,17 @@ static int sprd_sc_gate_enable(struct clk_hw *hw)
 
 	return 0;
 }
+
+static int sprd_pll_sc_gate_prepare(struct clk_hw *hw)
+{
+	struct sprd_gate *sg = hw_to_sprd_gate(hw);
+
+	clk_sc_gate_toggle(sg, true);
+	udelay(sg->udelay);
+
+	return 0;
+}
+
 static int sprd_gate_is_enabled(struct clk_hw *hw)
 {
 	struct sprd_gate *sg = hw_to_sprd_gate(hw);
@@ -109,3 +120,9 @@ const struct clk_ops sprd_sc_gate_ops = {
 };
 EXPORT_SYMBOL_GPL(sprd_sc_gate_ops);
 
+const struct clk_ops sprd_pll_sc_gate_ops = {
+	.unprepare	= sprd_sc_gate_disable,
+	.prepare	= sprd_pll_sc_gate_prepare,
+	.is_enabled	= sprd_gate_is_enabled,
+};
+EXPORT_SYMBOL_GPL(sprd_pll_sc_gate_ops);
diff --git a/drivers/clk/sprd/gate.h b/drivers/clk/sprd/gate.h
index dc352ea5..b558178 100644
--- a/drivers/clk/sprd/gate.h
+++ b/drivers/clk/sprd/gate.h
@@ -14,37 +14,136 @@ struct sprd_gate {
 	u32			enable_mask;
 	u16			flags;
 	u16			sc_offset;
+	u16			udelay;
 
 	struct sprd_clk_common	common;
 };
 
-#define SPRD_SC_GATE_CLK_OPS(_struct, _name, _parent, _reg, _sc_offset,	\
-			     _enable_mask, _flags, _gate_flags, _ops)	\
+#define SPRD_SC_GATE_CLK_HW_INIT_FN(_struct, _name, _parent, _reg,	\
+				    _sc_offset, _enable_mask, _flags,	\
+				    _gate_flags, _udelay, _ops, _fn)	\
 	struct sprd_gate _struct = {					\
 		.enable_mask	= _enable_mask,				\
 		.sc_offset	= _sc_offset,				\
 		.flags		= _gate_flags,				\
+		.udelay		= _udelay,				\
 		.common	= {						\
 			.regmap		= NULL,				\
 			.reg		= _reg,				\
-			.hw.init	= CLK_HW_INIT(_name,		\
-						      _parent,		\
-						      _ops,		\
-						      _flags),		\
+			.hw.init	= _fn(_name, _parent,		\
+					      _ops, _flags),		\
 		}							\
 	}
 
+#define SPRD_SC_GATE_CLK_OPS_UDELAY(_struct, _name, _parent, _reg,	\
+				    _sc_offset, _enable_mask, _flags,	\
+				    _gate_flags, _udelay, _ops)		\
+	SPRD_SC_GATE_CLK_HW_INIT_FN(_struct, _name, _parent, _reg,	\
+				    _sc_offset, _enable_mask, _flags,	\
+				    _gate_flags, _udelay, _ops, CLK_HW_INIT)
+
+#define SPRD_SC_GATE_CLK_OPS(_struct, _name, _parent, _reg, _sc_offset,	\
+			     _enable_mask, _flags, _gate_flags, _ops)	\
+	SPRD_SC_GATE_CLK_OPS_UDELAY(_struct, _name, _parent, _reg,	\
+				    _sc_offset, _enable_mask, _flags,	\
+				    _gate_flags, 0, _ops)
+
+#define SPRD_SC_GATE_CLK(_struct, _name, _parent, _reg, _sc_offset,	\
+			 _enable_mask, _flags, _gate_flags)		\
+	SPRD_SC_GATE_CLK_OPS(_struct, _name, _parent, _reg, _sc_offset,	\
+			     _enable_mask, _flags, _gate_flags,		\
+			     &sprd_sc_gate_ops)
+
 #define SPRD_GATE_CLK(_struct, _name, _parent, _reg,			\
 		      _enable_mask, _flags, _gate_flags)		\
 	SPRD_SC_GATE_CLK_OPS(_struct, _name, _parent, _reg, 0,		\
 			     _enable_mask, _flags, _gate_flags,		\
 			     &sprd_gate_ops)
 
-#define SPRD_SC_GATE_CLK(_struct, _name, _parent, _reg, _sc_offset,	\
-			 _enable_mask, _flags, _gate_flags)		\
-	SPRD_SC_GATE_CLK_OPS(_struct, _name, _parent, _reg, _sc_offset,	\
+#define SPRD_PLL_SC_GATE_CLK(_struct, _name, _parent, _reg, _sc_offset,	\
 			     _enable_mask, _flags, _gate_flags,		\
-			     &sprd_sc_gate_ops)
+			     _udelay)					\
+	SPRD_SC_GATE_CLK_OPS_UDELAY(_struct, _name, _parent, _reg,	\
+				    _sc_offset,	_enable_mask, _flags,	\
+				    _gate_flags, _udelay,		\
+				    &sprd_pll_sc_gate_ops)
+
+
+#define SPRD_SC_GATE_CLK_HW_OPS_UDELAY(_struct, _name, _parent, _reg,	\
+				       _sc_offset, _enable_mask,	\
+				       _flags, _gate_flags,		\
+				       _udelay, _ops)			\
+	SPRD_SC_GATE_CLK_HW_INIT_FN(_struct, _name, _parent, _reg,	\
+				    _sc_offset, _enable_mask, _flags,	\
+				    _gate_flags, _udelay, _ops,		\
+				    CLK_HW_INIT_HW)
+
+#define SPRD_SC_GATE_CLK_HW_OPS(_struct, _name, _parent, _reg,		\
+				_sc_offset, _enable_mask, _flags,	\
+				_gate_flags, _ops)			\
+	SPRD_SC_GATE_CLK_HW_OPS_UDELAY(_struct, _name, _parent, _reg,	\
+				       _sc_offset, _enable_mask,	\
+				       _flags, _gate_flags, 0, _ops)
+
+#define SPRD_SC_GATE_CLK_HW(_struct, _name, _parent, _reg,		\
+			    _sc_offset, _enable_mask, _flags,		\
+			    _gate_flags)				\
+	SPRD_SC_GATE_CLK_HW_OPS(_struct, _name, _parent, _reg,		\
+				_sc_offset, _enable_mask, _flags,	\
+				_gate_flags, &sprd_sc_gate_ops)
+
+#define SPRD_GATE_CLK_HW(_struct, _name, _parent, _reg,			\
+			 _enable_mask, _flags, _gate_flags)		\
+	SPRD_SC_GATE_CLK_HW_OPS(_struct, _name, _parent, _reg, 0,	\
+				_enable_mask, _flags, _gate_flags,	\
+				&sprd_gate_ops)
+
+#define SPRD_PLL_SC_GATE_CLK_HW(_struct, _name, _parent, _reg,		\
+				_sc_offset, _enable_mask, _flags,	\
+				_gate_flags, _udelay)			\
+	SPRD_SC_GATE_CLK_HW_OPS_UDELAY(_struct, _name, _parent, _reg,	\
+				       _sc_offset, _enable_mask,	\
+				       _flags, _gate_flags, _udelay,	\
+				       &sprd_pll_sc_gate_ops)
+
+#define SPRD_SC_GATE_CLK_FW_NAME_OPS_UDELAY(_struct, _name, _parent,	\
+					    _reg, _sc_offset,		\
+					    _enable_mask, _flags,	\
+					    _gate_flags, _udelay, _ops)	\
+	SPRD_SC_GATE_CLK_HW_INIT_FN(_struct, _name, _parent, _reg,	\
+				    _sc_offset, _enable_mask, _flags,	\
+				    _gate_flags, _udelay, _ops,		\
+				    CLK_HW_INIT_FW_NAME)
+
+#define SPRD_SC_GATE_CLK_FW_NAME_OPS(_struct, _name, _parent, _reg,	\
+				     _sc_offset, _enable_mask, _flags,	\
+				     _gate_flags, _ops)			\
+	SPRD_SC_GATE_CLK_FW_NAME_OPS_UDELAY(_struct, _name, _parent,	\
+					    _reg, _sc_offset,		\
+					    _enable_mask, _flags,	\
+					    _gate_flags, 0, _ops)
+
+#define SPRD_SC_GATE_CLK_FW_NAME(_struct, _name, _parent, _reg,		\
+				 _sc_offset, _enable_mask, _flags,	\
+				 _gate_flags)				\
+	SPRD_SC_GATE_CLK_FW_NAME_OPS(_struct, _name, _parent, _reg,	\
+				     _sc_offset, _enable_mask, _flags,	\
+				     _gate_flags, &sprd_sc_gate_ops)
+
+#define SPRD_GATE_CLK_FW_NAME(_struct, _name, _parent, _reg,		\
+			      _enable_mask, _flags, _gate_flags)	\
+	SPRD_SC_GATE_CLK_FW_NAME_OPS(_struct, _name, _parent, _reg, 0,	\
+				     _enable_mask, _flags, _gate_flags,	\
+				     &sprd_gate_ops)
+
+#define SPRD_PLL_SC_GATE_CLK_FW_NAME(_struct, _name, _parent, _reg,	\
+				     _sc_offset, _enable_mask, _flags,	\
+				     _gate_flags, _udelay)		\
+	SPRD_SC_GATE_CLK_FW_NAME_OPS_UDELAY(_struct, _name, _parent,	\
+					    _reg, _sc_offset,		\
+					    _enable_mask, _flags,	\
+					    _gate_flags, _udelay,	\
+					    &sprd_pll_sc_gate_ops)
 
 static inline struct sprd_gate *hw_to_sprd_gate(const struct clk_hw *hw)
 {
@@ -55,5 +154,6 @@ static inline struct sprd_gate *hw_to_sprd_gate(const struct clk_hw *hw)
 
 extern const struct clk_ops sprd_gate_ops;
 extern const struct clk_ops sprd_sc_gate_ops;
+extern const struct clk_ops sprd_pll_sc_gate_ops;
 
 #endif /* _SPRD_GATE_H_ */
diff --git a/drivers/clk/sprd/mux.h b/drivers/clk/sprd/mux.h
index 892e419..f3cc31d 100644
--- a/drivers/clk/sprd/mux.h
+++ b/drivers/clk/sprd/mux.h
@@ -36,26 +36,40 @@ struct sprd_mux {
 		.table	= _table,			\
 	}
 
-#define SPRD_MUX_CLK_TABLE(_struct, _name, _parents, _table,		\
-				     _reg, _shift, _width,		\
-				     _flags)				\
+#define SPRD_MUX_CLK_HW_INIT_FN(_struct, _name, _parents, _table,	\
+				_reg, _shift, _width, _flags, _fn)	\
 	struct sprd_mux _struct = {					\
 		.mux	= _SPRD_MUX_CLK(_shift, _width, _table),	\
 		.common	= {						\
 			.regmap		= NULL,				\
 			.reg		= _reg,				\
-			.hw.init = CLK_HW_INIT_PARENTS(_name,		\
-						       _parents,	\
-						       &sprd_mux_ops,	\
-						       _flags),		\
+			.hw.init = _fn(_name, _parents,			\
+				       &sprd_mux_ops, _flags),		\
 		}							\
 	}
 
+#define SPRD_MUX_CLK_TABLE(_struct, _name, _parents, _table,		\
+			   _reg, _shift, _width, _flags)		\
+	SPRD_MUX_CLK_HW_INIT_FN(_struct, _name, _parents, _table,	\
+				_reg, _shift, _width, _flags,		\
+				CLK_HW_INIT_PARENTS)
+
 #define SPRD_MUX_CLK(_struct, _name, _parents, _reg,		\
 		     _shift, _width, _flags)			\
 	SPRD_MUX_CLK_TABLE(_struct, _name, _parents, NULL,	\
 			   _reg, _shift, _width, _flags)
 
+#define SPRD_MUX_CLK_DATA_TABLE(_struct, _name, _parents, _table,	\
+				_reg, _shift, _width, _flags)		\
+	SPRD_MUX_CLK_HW_INIT_FN(_struct, _name, _parents, _table,	\
+				_reg, _shift, _width, _flags,		\
+				CLK_HW_INIT_PARENTS_DATA)
+
+#define SPRD_MUX_CLK_DATA(_struct, _name, _parents, _reg,		\
+			  _shift, _width, _flags)			\
+	SPRD_MUX_CLK_DATA_TABLE(_struct, _name, _parents, NULL,		\
+				_reg, _shift, _width, _flags)
+
 static inline struct sprd_mux *hw_to_sprd_mux(const struct clk_hw *hw)
 {
 	struct sprd_clk_common *common = hw_to_sprd_clk_common(hw);
diff --git a/drivers/clk/sprd/pll.c b/drivers/clk/sprd/pll.c
index 640270f..1579148 100644
--- a/drivers/clk/sprd/pll.c
+++ b/drivers/clk/sprd/pll.c
@@ -87,11 +87,12 @@ static u32 pll_get_ibias(u64 rate, const u64 *table)
 {
 	u32 i, num = table[0];
 
-	for (i = 1; i < num + 1; i++)
-		if (rate <= table[i])
+	/* table[0] indicates the number of items in this table */
+	for (i = 0; i < num; i++)
+		if (rate <= table[i + 1])
 			break;
 
-	return (i == num + 1) ? num : i;
+	return i == num ? num - 1 : i;
 }
 
 static unsigned long _sprd_pll_recalc_rate(const struct sprd_pll *pll,
diff --git a/drivers/clk/sprd/pll.h b/drivers/clk/sprd/pll.h
index e95f11e..6558f50 100644
--- a/drivers/clk/sprd/pll.h
+++ b/drivers/clk/sprd/pll.h
@@ -61,27 +61,33 @@ struct sprd_pll {
 	struct sprd_clk_common	common;
 };
 
+#define SPRD_PLL_HW_INIT_FN(_struct, _name, _parent, _reg,	\
+			    _regs_num, _itable, _factors,	\
+			    _udelay, _k1, _k2, _fflag,		\
+			    _fvco, _fn)				\
+	struct sprd_pll _struct = {				\
+		.regs_num	= _regs_num,			\
+		.itable		= _itable,			\
+		.factors	= _factors,			\
+		.udelay		= _udelay,			\
+		.k1		= _k1,				\
+		.k2		= _k2,				\
+		.fflag		= _fflag,			\
+		.fvco		= _fvco,			\
+		.common		= {				\
+			.regmap		= NULL,			\
+			.reg		= _reg,			\
+			.hw.init	= _fn(_name, _parent,	\
+					      &sprd_pll_ops, 0),\
+		},						\
+	}
+
 #define SPRD_PLL_WITH_ITABLE_K_FVCO(_struct, _name, _parent, _reg,	\
 				    _regs_num, _itable, _factors,	\
 				    _udelay, _k1, _k2, _fflag, _fvco)	\
-	struct sprd_pll _struct = {					\
-		.regs_num	= _regs_num,				\
-		.itable		= _itable,				\
-		.factors	= _factors,				\
-		.udelay		= _udelay,				\
-		.k1		= _k1,					\
-		.k2		= _k2,					\
-		.fflag		= _fflag,				\
-		.fvco		= _fvco,				\
-		.common		= {					\
-			.regmap		= NULL,				\
-			.reg		= _reg,				\
-			.hw.init	= CLK_HW_INIT(_name,		\
-						      _parent,		\
-						      &sprd_pll_ops,	\
-						      0),		\
-		},							\
-	}
+	SPRD_PLL_HW_INIT_FN(_struct, _name, _parent, _reg, _regs_num,	\
+			    _itable, _factors, _udelay, _k1, _k2,	\
+			    _fflag, _fvco, CLK_HW_INIT)
 
 #define SPRD_PLL_WITH_ITABLE_K(_struct, _name, _parent, _reg,		\
 			       _regs_num, _itable, _factors,		\
@@ -96,6 +102,19 @@ struct sprd_pll {
 				    _regs_num, _itable, _factors,	\
 				    _udelay, 1000, 1000, 0, 0)
 
+#define SPRD_PLL_FW_NAME(_struct, _name, _parent, _reg, _regs_num,	\
+			 _itable, _factors, _udelay, _k1, _k2,		\
+			 _fflag, _fvco)					\
+	SPRD_PLL_HW_INIT_FN(_struct, _name, _parent, _reg, _regs_num,	\
+			    _itable, _factors, _udelay, _k1, _k2,	\
+			    _fflag, _fvco, CLK_HW_INIT_FW_NAME)
+
+#define SPRD_PLL_HW(_struct, _name, _parent, _reg, _regs_num, _itable,	\
+		    _factors, _udelay, _k1, _k2, _fflag, _fvco)		\
+	SPRD_PLL_HW_INIT_FN(_struct, _name, _parent, _reg, _regs_num,	\
+			    _itable, _factors, _udelay, _k1, _k2,	\
+			    _fflag, _fvco, CLK_HW_INIT_HW)
+
 static inline struct sprd_pll *hw_to_sprd_pll(struct clk_hw *hw)
 {
 	struct sprd_clk_common *common = hw_to_sprd_clk_common(hw);
diff --git a/drivers/clk/sprd/sc9863a-clk.c b/drivers/clk/sprd/sc9863a-clk.c
new file mode 100644
index 0000000..2e2dfb2
--- /dev/null
+++ b/drivers/clk/sprd/sc9863a-clk.c
@@ -0,0 +1,1773 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Unisoc SC9863A clock driver
+ *
+ * Copyright (C) 2019 Unisoc, Inc.
+ * Author: Chunyan Zhang <chunyan.zhang@unisoc.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/clock/sprd,sc9863a-clk.h>
+
+#include "common.h"
+#include "composite.h"
+#include "div.h"
+#include "gate.h"
+#include "mux.h"
+#include "pll.h"
+
+/* mpll*_gate clocks control cpu cores, they were enabled by default */
+SPRD_PLL_SC_GATE_CLK_FW_NAME(mpll0_gate, "mpll0-gate", "ext-26m", 0x94,
+			     0x1000, BIT(0), CLK_IGNORE_UNUSED, 0, 240);
+SPRD_PLL_SC_GATE_CLK_FW_NAME(dpll0_gate, "dpll0-gate", "ext-26m", 0x98,
+			     0x1000, BIT(0), 0, 0, 240);
+SPRD_PLL_SC_GATE_CLK_FW_NAME(lpll_gate, "lpll-gate", "ext-26m", 0x9c,
+			     0x1000, BIT(0), 0, 0, 240);
+SPRD_PLL_SC_GATE_CLK_FW_NAME(gpll_gate, "gpll-gate", "ext-26m", 0xa8,
+			     0x1000, BIT(0), 0, 0, 240);
+SPRD_PLL_SC_GATE_CLK_FW_NAME(dpll1_gate, "dpll1-gate", "ext-26m", 0x1dc,
+			     0x1000, BIT(0), 0, 0, 240);
+SPRD_PLL_SC_GATE_CLK_FW_NAME(mpll1_gate, "mpll1-gate", "ext-26m", 0x1e0,
+			     0x1000, BIT(0), CLK_IGNORE_UNUSED, 0, 240);
+SPRD_PLL_SC_GATE_CLK_FW_NAME(mpll2_gate, "mpll2-gate", "ext-26m", 0x1e4,
+			     0x1000, BIT(0), CLK_IGNORE_UNUSED, 0, 240);
+SPRD_PLL_SC_GATE_CLK_FW_NAME(isppll_gate, "isppll-gate", "ext-26m", 0x1e8,
+			     0x1000, BIT(0), 0, 0, 240);
+
+static struct sprd_clk_common *sc9863a_pmu_gate_clks[] = {
+	/* address base is 0x402b0000 */
+	&mpll0_gate.common,
+	&dpll0_gate.common,
+	&lpll_gate.common,
+	&gpll_gate.common,
+	&dpll1_gate.common,
+	&mpll1_gate.common,
+	&mpll2_gate.common,
+	&isppll_gate.common,
+};
+
+static struct clk_hw_onecell_data sc9863a_pmu_gate_hws = {
+	.hws	= {
+		[CLK_MPLL0_GATE]	= &mpll0_gate.common.hw,
+		[CLK_DPLL0_GATE]	= &dpll0_gate.common.hw,
+		[CLK_LPLL_GATE]		= &lpll_gate.common.hw,
+		[CLK_GPLL_GATE]		= &gpll_gate.common.hw,
+		[CLK_DPLL1_GATE]	= &dpll1_gate.common.hw,
+		[CLK_MPLL1_GATE]	= &mpll1_gate.common.hw,
+		[CLK_MPLL2_GATE]	= &mpll2_gate.common.hw,
+		[CLK_ISPPLL_GATE]	= &isppll_gate.common.hw,
+	},
+	.num	= CLK_PMU_APB_NUM,
+};
+
+static const struct sprd_clk_desc sc9863a_pmu_gate_desc = {
+	.clk_clks	= sc9863a_pmu_gate_clks,
+	.num_clk_clks	= ARRAY_SIZE(sc9863a_pmu_gate_clks),
+	.hw_clks        = &sc9863a_pmu_gate_hws,
+};
+
+static const u64 itable[5] = {4, 1000000000, 1200000000,
+			      1400000000, 1600000000};
+
+static const struct clk_bit_field f_twpll[PLL_FACT_MAX] = {
+	{ .shift = 95,	.width = 1 },	/* lock_done	*/
+	{ .shift = 0,	.width = 1 },	/* div_s	*/
+	{ .shift = 1,	.width = 1 },	/* mod_en	*/
+	{ .shift = 2,	.width = 1 },	/* sdm_en	*/
+	{ .shift = 0,	.width = 0 },	/* refin	*/
+	{ .shift = 3,	.width = 3 },	/* ibias	*/
+	{ .shift = 8,	.width = 11 },	/* n		*/
+	{ .shift = 55,	.width = 7 },	/* nint		*/
+	{ .shift = 32,	.width = 23},	/* kint		*/
+	{ .shift = 0,	.width = 0 },	/* prediv	*/
+	{ .shift = 0,	.width = 0 },	/* postdiv	*/
+};
+static SPRD_PLL_FW_NAME(twpll, "twpll", "ext-26m", 0x4, 3, itable,
+			f_twpll, 240, 1000, 1000, 0, 0);
+static CLK_FIXED_FACTOR_HW(twpll_768m, "twpll-768m", &twpll.common.hw, 2, 1, 0);
+static CLK_FIXED_FACTOR_HW(twpll_384m, "twpll-384m", &twpll.common.hw, 4, 1, 0);
+static CLK_FIXED_FACTOR_HW(twpll_192m, "twpll-192m", &twpll.common.hw, 8, 1, 0);
+static CLK_FIXED_FACTOR_HW(twpll_96m, "twpll-96m", &twpll.common.hw, 16, 1, 0);
+static CLK_FIXED_FACTOR_HW(twpll_48m, "twpll-48m", &twpll.common.hw, 32, 1, 0);
+static CLK_FIXED_FACTOR_HW(twpll_24m, "twpll-24m", &twpll.common.hw, 64, 1, 0);
+static CLK_FIXED_FACTOR_HW(twpll_12m, "twpll-12m", &twpll.common.hw, 128, 1, 0);
+static CLK_FIXED_FACTOR_HW(twpll_512m, "twpll-512m", &twpll.common.hw, 3, 1, 0);
+static CLK_FIXED_FACTOR_HW(twpll_256m, "twpll-256m", &twpll.common.hw, 6, 1, 0);
+static CLK_FIXED_FACTOR_HW(twpll_128m, "twpll-128m", &twpll.common.hw, 12, 1, 0);
+static CLK_FIXED_FACTOR_HW(twpll_64m, "twpll-64m", &twpll.common.hw, 24, 1, 0);
+static CLK_FIXED_FACTOR_HW(twpll_307m2, "twpll-307m2", &twpll.common.hw, 5, 1, 0);
+static CLK_FIXED_FACTOR_HW(twpll_219m4, "twpll-219m4", &twpll.common.hw, 7, 1, 0);
+static CLK_FIXED_FACTOR_HW(twpll_170m6, "twpll-170m6", &twpll.common.hw, 9, 1, 0);
+static CLK_FIXED_FACTOR_HW(twpll_153m6, "twpll-153m6", &twpll.common.hw, 10, 1, 0);
+static CLK_FIXED_FACTOR_HW(twpll_76m8, "twpll-76m8", &twpll.common.hw, 20, 1, 0);
+static CLK_FIXED_FACTOR_HW(twpll_51m2, "twpll-51m2", &twpll.common.hw, 30, 1, 0);
+static CLK_FIXED_FACTOR_HW(twpll_38m4, "twpll-38m4", &twpll.common.hw, 40, 1, 0);
+static CLK_FIXED_FACTOR_HW(twpll_19m2, "twpll-19m2", &twpll.common.hw, 80, 1, 0);
+
+static const struct clk_bit_field f_lpll[PLL_FACT_MAX] = {
+	{ .shift = 95,	.width = 1 },	/* lock_done	*/
+	{ .shift = 0,	.width = 1 },	/* div_s	*/
+	{ .shift = 1,	.width = 1 },	/* mod_en	*/
+	{ .shift = 2,	.width = 1 },	/* sdm_en	*/
+	{ .shift = 0,	.width = 0 },	/* refin	*/
+	{ .shift = 6,	.width = 2 },	/* ibias	*/
+	{ .shift = 8,	.width = 11 },	/* n		*/
+	{ .shift = 55,	.width = 7 },	/* nint		*/
+	{ .shift = 32,	.width = 23},	/* kint		*/
+	{ .shift = 0,	.width = 0 },	/* prediv	*/
+	{ .shift = 0,	.width = 0 },	/* postdiv	*/
+};
+static SPRD_PLL_HW(lpll, "lpll", &lpll_gate.common.hw, 0x20, 3, itable,
+		   f_lpll, 240, 1000, 1000, 0, 0);
+static CLK_FIXED_FACTOR_HW(lpll_409m6, "lpll-409m6", &lpll.common.hw, 3, 1, 0);
+static CLK_FIXED_FACTOR_HW(lpll_245m76, "lpll-245m76", &lpll.common.hw, 5, 1, 0);
+
+static const struct clk_bit_field f_gpll[PLL_FACT_MAX] = {
+	{ .shift = 95,	.width = 1 },	/* lock_done	*/
+	{ .shift = 0,	.width = 1 },	/* div_s	*/
+	{ .shift = 1,	.width = 1 },	/* mod_en	*/
+	{ .shift = 2,	.width = 1 },	/* sdm_en	*/
+	{ .shift = 0,	.width = 0 },	/* refin	*/
+	{ .shift = 6,	.width = 2 },	/* ibias	*/
+	{ .shift = 8,	.width = 11 },	/* n		*/
+	{ .shift = 55,	.width = 7 },	/* nint		*/
+	{ .shift = 32,	.width = 23},	/* kint		*/
+	{ .shift = 0,	.width = 0 },	/* prediv	*/
+	{ .shift = 80,	.width = 1 },	/* postdiv	*/
+};
+static SPRD_PLL_HW(gpll, "gpll", &gpll_gate.common.hw, 0x38, 3, itable,
+		   f_gpll, 240, 1000, 1000, 1, 400000000);
+
+static SPRD_PLL_HW(isppll, "isppll", &isppll_gate.common.hw, 0x50, 3, itable,
+		   f_gpll, 240, 1000, 1000, 0, 0);
+static CLK_FIXED_FACTOR_HW(isppll_468m, "isppll-468m", &isppll.common.hw, 2, 1, 0);
+
+static struct sprd_clk_common *sc9863a_pll_clks[] = {
+	/* address base is 0x40353000 */
+	&twpll.common,
+	&lpll.common,
+	&gpll.common,
+	&isppll.common,
+};
+
+static struct clk_hw_onecell_data sc9863a_pll_hws = {
+	.hws	= {
+		[CLK_TWPLL]		= &twpll.common.hw,
+		[CLK_TWPLL_768M]	= &twpll_768m.hw,
+		[CLK_TWPLL_384M]	= &twpll_384m.hw,
+		[CLK_TWPLL_192M]	= &twpll_192m.hw,
+		[CLK_TWPLL_96M]		= &twpll_96m.hw,
+		[CLK_TWPLL_48M]		= &twpll_48m.hw,
+		[CLK_TWPLL_24M]		= &twpll_24m.hw,
+		[CLK_TWPLL_12M]		= &twpll_12m.hw,
+		[CLK_TWPLL_512M]	= &twpll_512m.hw,
+		[CLK_TWPLL_256M]	= &twpll_256m.hw,
+		[CLK_TWPLL_128M]	= &twpll_128m.hw,
+		[CLK_TWPLL_64M]		= &twpll_64m.hw,
+		[CLK_TWPLL_307M2]	= &twpll_307m2.hw,
+		[CLK_TWPLL_219M4]	= &twpll_219m4.hw,
+		[CLK_TWPLL_170M6]	= &twpll_170m6.hw,
+		[CLK_TWPLL_153M6]	= &twpll_153m6.hw,
+		[CLK_TWPLL_76M8]	= &twpll_76m8.hw,
+		[CLK_TWPLL_51M2]	= &twpll_51m2.hw,
+		[CLK_TWPLL_38M4]	= &twpll_38m4.hw,
+		[CLK_TWPLL_19M2]	= &twpll_19m2.hw,
+		[CLK_LPLL]		= &lpll.common.hw,
+		[CLK_LPLL_409M6]	= &lpll_409m6.hw,
+		[CLK_LPLL_245M76]	= &lpll_245m76.hw,
+		[CLK_GPLL]		= &gpll.common.hw,
+		[CLK_ISPPLL]		= &isppll.common.hw,
+		[CLK_ISPPLL_468M]	= &isppll_468m.hw,
+
+	},
+	.num	= CLK_ANLG_PHY_G1_NUM,
+};
+
+static const struct sprd_clk_desc sc9863a_pll_desc = {
+	.clk_clks	= sc9863a_pll_clks,
+	.num_clk_clks	= ARRAY_SIZE(sc9863a_pll_clks),
+	.hw_clks        = &sc9863a_pll_hws,
+};
+
+static const u64 itable_mpll[6] = {5, 1000000000, 1200000000, 1400000000,
+				   1600000000, 1800000000};
+static SPRD_PLL_HW(mpll0, "mpll0", &mpll0_gate.common.hw, 0x0, 3, itable_mpll,
+		   f_gpll, 240, 1000, 1000, 1, 1000000000);
+static SPRD_PLL_HW(mpll1, "mpll1", &mpll1_gate.common.hw, 0x18, 3, itable_mpll,
+		   f_gpll, 240, 1000, 1000, 1, 1000000000);
+static SPRD_PLL_HW(mpll2, "mpll2", &mpll2_gate.common.hw, 0x30, 3, itable_mpll,
+		   f_gpll, 240, 1000, 1000, 1, 1000000000);
+static CLK_FIXED_FACTOR_HW(mpll2_675m, "mpll2-675m", &mpll2.common.hw, 2, 1, 0);
+
+static struct sprd_clk_common *sc9863a_mpll_clks[] = {
+	/* address base is 0x40359000 */
+	&mpll0.common,
+	&mpll1.common,
+	&mpll2.common,
+};
+
+static struct clk_hw_onecell_data sc9863a_mpll_hws = {
+	.hws	= {
+		[CLK_MPLL0]		= &mpll0.common.hw,
+		[CLK_MPLL1]		= &mpll1.common.hw,
+		[CLK_MPLL2]		= &mpll2.common.hw,
+		[CLK_MPLL2_675M]	= &mpll2_675m.hw,
+
+	},
+	.num	= CLK_ANLG_PHY_G4_NUM,
+};
+
+static const struct sprd_clk_desc sc9863a_mpll_desc = {
+	.clk_clks	= sc9863a_mpll_clks,
+	.num_clk_clks	= ARRAY_SIZE(sc9863a_mpll_clks),
+	.hw_clks        = &sc9863a_mpll_hws,
+};
+
+static SPRD_SC_GATE_CLK_FW_NAME(audio_gate,	"audio-gate",	"ext-26m",
+				0x4, 0x1000, BIT(8), 0, 0);
+
+static SPRD_PLL_FW_NAME(rpll, "rpll", "ext-26m", 0x10,
+			3, itable, f_lpll, 240, 1000, 1000, 0, 0);
+
+static CLK_FIXED_FACTOR_HW(rpll_390m, "rpll-390m", &rpll.common.hw, 2, 1, 0);
+static CLK_FIXED_FACTOR_HW(rpll_260m, "rpll-260m", &rpll.common.hw, 3, 1, 0);
+static CLK_FIXED_FACTOR_HW(rpll_195m, "rpll-195m", &rpll.common.hw, 4, 1, 0);
+static CLK_FIXED_FACTOR_HW(rpll_26m, "rpll-26m", &rpll.common.hw, 30, 1, 0);
+
+static struct sprd_clk_common *sc9863a_rpll_clks[] = {
+	/* address base is 0x4035c000 */
+	&audio_gate.common,
+	&rpll.common,
+};
+
+static struct clk_hw_onecell_data sc9863a_rpll_hws = {
+	.hws	= {
+		[CLK_AUDIO_GATE]	= &audio_gate.common.hw,
+		[CLK_RPLL]		= &rpll.common.hw,
+		[CLK_RPLL_390M]		= &rpll_390m.hw,
+		[CLK_RPLL_260M]		= &rpll_260m.hw,
+		[CLK_RPLL_195M]		= &rpll_195m.hw,
+		[CLK_RPLL_26M]		= &rpll_26m.hw,
+	},
+	.num	= CLK_ANLG_PHY_G5_NUM,
+};
+
+static const struct sprd_clk_desc sc9863a_rpll_desc = {
+	.clk_clks	= sc9863a_rpll_clks,
+	.num_clk_clks	= ARRAY_SIZE(sc9863a_rpll_clks),
+	.hw_clks        = &sc9863a_rpll_hws,
+};
+
+static const u64 itable_dpll[5] = {4, 1211000000, 1320000000, 1570000000,
+				   1866000000};
+static SPRD_PLL_HW(dpll0, "dpll0", &dpll0_gate.common.hw, 0x0, 3, itable_dpll,
+		   f_lpll, 240, 1000, 1000, 0, 0);
+static SPRD_PLL_HW(dpll1, "dpll1", &dpll1_gate.common.hw, 0x18, 3, itable_dpll,
+		   f_lpll, 240, 1000, 1000, 0, 0);
+
+static CLK_FIXED_FACTOR_HW(dpll0_933m, "dpll0-933m", &dpll0.common.hw, 2, 1, 0);
+static CLK_FIXED_FACTOR_HW(dpll0_622m3, "dpll0-622m3", &dpll0.common.hw, 3, 1, 0);
+static CLK_FIXED_FACTOR_HW(dpll1_400m, "dpll1-400m", &dpll0.common.hw, 4, 1, 0);
+static CLK_FIXED_FACTOR_HW(dpll1_266m7, "dpll1-266m7", &dpll0.common.hw, 6, 1, 0);
+static CLK_FIXED_FACTOR_HW(dpll1_123m1, "dpll1-123m1", &dpll0.common.hw, 13, 1, 0);
+static CLK_FIXED_FACTOR_HW(dpll1_50m, "dpll1-50m", &dpll0.common.hw, 32, 1, 0);
+
+static struct sprd_clk_common *sc9863a_dpll_clks[] = {
+	/* address base is 0x40363000 */
+	&dpll0.common,
+	&dpll1.common,
+};
+
+static struct clk_hw_onecell_data sc9863a_dpll_hws = {
+	.hws	= {
+		[CLK_DPLL0]		= &dpll0.common.hw,
+		[CLK_DPLL1]		= &dpll1.common.hw,
+		[CLK_DPLL0_933M]	= &dpll0_933m.hw,
+		[CLK_DPLL0_622M3]	= &dpll0_622m3.hw,
+		[CLK_DPLL0_400M]	= &dpll1_400m.hw,
+		[CLK_DPLL0_266M7]	= &dpll1_266m7.hw,
+		[CLK_DPLL0_123M1]	= &dpll1_123m1.hw,
+		[CLK_DPLL0_50M]		= &dpll1_50m.hw,
+
+	},
+	.num	= CLK_ANLG_PHY_G7_NUM,
+};
+
+static const struct sprd_clk_desc sc9863a_dpll_desc = {
+	.clk_clks	= sc9863a_dpll_clks,
+	.num_clk_clks	= ARRAY_SIZE(sc9863a_dpll_clks),
+	.hw_clks        = &sc9863a_dpll_hws,
+};
+
+static CLK_FIXED_FACTOR_FW_NAME(clk_6m5, "clk-6m5", "ext-26m", 4, 1, 0);
+static CLK_FIXED_FACTOR_FW_NAME(clk_4m3, "clk-4m3", "ext-26m", 6, 1, 0);
+static CLK_FIXED_FACTOR_FW_NAME(clk_2m, "clk-2m", "ext-26m", 13, 1, 0);
+static CLK_FIXED_FACTOR_FW_NAME(clk_250k, "clk-250k", "ext-26m", 104, 1, 0);
+static CLK_FIXED_FACTOR_FW_NAME(rco_25m, "rco-25m", "rco-100m",	4, 1, 0);
+static CLK_FIXED_FACTOR_FW_NAME(rco_4m, "rco-4m", "rco-100m", 25, 1, 0);
+static CLK_FIXED_FACTOR_FW_NAME(rco_2m, "rco-2m", "rco-100m", 50, 1, 0);
+
+#define SC9863A_MUX_FLAG	\
+	(CLK_GET_RATE_NOCACHE | CLK_SET_RATE_NO_REPARENT)
+
+static CLK_FIXED_FACTOR_FW_NAME(clk_13m, "clk-13m", "ext-26m", 2, 1, 0);
+static const struct clk_parent_data emc_clk_parents[] = {
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_384m.hw  },
+	{ .hw = &twpll_512m.hw  },
+	{ .hw = &twpll_768m.hw  },
+	{ .hw = &twpll.common.hw  },
+};
+static SPRD_MUX_CLK_DATA(emc_clk, "emc-clk", emc_clk_parents, 0x220,
+			 0, 3, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data aon_apb_parents[] = {
+	{ .hw = &rco_4m.hw  },
+	{ .hw = &rco_25m.hw  },
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_96m.hw  },
+	{ .fw_name = "rco-100m" },
+	{ .hw = &twpll_128m.hw  },
+};
+static SPRD_COMP_CLK_DATA(aon_apb, "aon-apb", aon_apb_parents, 0x224,
+			  0, 3, 8, 2, 0);
+
+static const struct clk_parent_data adi_parents[] = {
+	{ .hw = &rco_4m.hw  },
+	{ .hw = &rco_25m.hw  },
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_38m4.hw  },
+	{ .hw = &twpll_51m2.hw  },
+};
+static SPRD_MUX_CLK_DATA(adi_clk, "adi-clk", adi_parents, 0x228,
+			 0, 3, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data aux_parents[] = {
+	{ .fw_name = "ext-32k" },
+	{ .hw = &rpll_26m.hw  },
+	{ .fw_name = "ext-26m" },
+};
+static SPRD_COMP_CLK_DATA(aux0_clk, "aux0-clk", aux_parents, 0x22c,
+			  0, 5, 8, 4, 0);
+static SPRD_COMP_CLK_DATA(aux1_clk, "aux1-clk", aux_parents, 0x230,
+			  0, 5, 8, 4, 0);
+static SPRD_COMP_CLK_DATA(aux2_clk, "aux2-clk", aux_parents, 0x234,
+			  0, 5, 8, 4, 0);
+static SPRD_COMP_CLK_DATA(probe_clk, "probe-clk", aux_parents, 0x238,
+			  0, 5, 8, 4, 0);
+
+static const struct clk_parent_data pwm_parents[] = {
+	{ .fw_name = "ext-32k" },
+	{ .hw = &rpll_26m.hw  },
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_48m.hw  },
+};
+static SPRD_MUX_CLK_DATA(pwm0_clk, "pwm0-clk", pwm_parents, 0x23c,
+			 0, 2, SC9863A_MUX_FLAG);
+static SPRD_MUX_CLK_DATA(pwm1_clk, "pwm1-clk", pwm_parents, 0x240,
+			 0, 2, SC9863A_MUX_FLAG);
+static SPRD_MUX_CLK_DATA(pwm2_clk, "pwm2-clk", pwm_parents, 0x244,
+			 0, 2, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data aon_thm_parents[] = {
+	{ .fw_name = "ext-32k" },
+	{ .hw = &clk_250k.hw  },
+};
+static SPRD_MUX_CLK_DATA(aon_thm_clk, "aon-thm-clk", aon_thm_parents, 0x25c,
+			 0, 1, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data audif_parents[] = {
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_38m4.hw  },
+	{ .hw = &twpll_51m2.hw  },
+};
+static SPRD_MUX_CLK_DATA(audif_clk, "audif-clk", audif_parents, 0x264,
+			 0, 2, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data cpu_dap_parents[] = {
+	{ .hw = &rco_4m.hw  },
+	{ .hw = &rco_25m.hw  },
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_76m8.hw  },
+	{ .fw_name = "rco-100m" },
+	{ .hw = &twpll_128m.hw  },
+	{ .hw = &twpll_153m6.hw  },
+};
+static SPRD_MUX_CLK_DATA(cpu_dap_clk, "cpu-dap-clk", cpu_dap_parents, 0x26c,
+			 0, 3, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data cpu_ts_parents[] = {
+	{ .fw_name = "ext-32k" },
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_128m.hw  },
+	{ .hw = &twpll_153m6.hw  },
+};
+static SPRD_MUX_CLK_DATA(cpu_ts_clk, "cpu-ts-clk", cpu_ts_parents, 0x274,
+			 0, 2, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data djtag_tck_parents[] = {
+	{ .hw = &rco_4m.hw  },
+	{ .fw_name = "ext-26m" },
+};
+static SPRD_MUX_CLK_DATA(djtag_tck_clk, "djtag-tck-clk", djtag_tck_parents, 0x28c,
+			 0, 1, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data emc_ref_parents[] = {
+	{ .hw = &clk_6m5.hw  },
+	{ .hw = &clk_13m.hw  },
+	{ .fw_name = "ext-26m" },
+};
+static SPRD_MUX_CLK_DATA(emc_ref_clk, "emc-ref-clk", emc_ref_parents, 0x29c,
+			 0, 2, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data cssys_parents[] = {
+	{ .hw = &rco_4m.hw  },
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_96m.hw  },
+	{ .fw_name = "rco-100m" },
+	{ .hw = &twpll_128m.hw  },
+	{ .hw = &twpll_153m6.hw  },
+	{ .hw = &twpll_384m.hw  },
+	{ .hw = &twpll_512m.hw  },
+	{ .hw = &mpll2_675m.hw  },
+};
+static SPRD_COMP_CLK_DATA(cssys_clk, "cssys-clk", cssys_parents, 0x2a0,
+			  0, 4, 8, 2, 0);
+
+static const struct clk_parent_data aon_pmu_parents[] = {
+	{ .fw_name = "ext-32k" },
+	{ .hw = &rco_4m.hw  },
+	{ .fw_name = "ext-4m" },
+};
+static SPRD_MUX_CLK_DATA(aon_pmu_clk, "aon-pmu-clk", aon_pmu_parents, 0x2a8,
+			 0, 2, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data pmu_26m_parents[] = {
+	{ .hw = &rco_4m.hw  },
+	{ .hw = &rco_25m.hw  },
+	{ .fw_name = "ext-26m" },
+};
+static SPRD_MUX_CLK_DATA(pmu_26m_clk, "26m-pmu-clk", pmu_26m_parents, 0x2ac,
+			 0, 2, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data aon_tmr_parents[] = {
+	{ .hw = &rco_4m.hw  },
+	{ .fw_name = "ext-26m" },
+};
+static SPRD_MUX_CLK_DATA(aon_tmr_clk, "aon-tmr-clk", aon_tmr_parents, 0x2b0,
+			 0, 1, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data power_cpu_parents[] = {
+	{ .fw_name = "ext-26m" },
+	{ .hw = &rco_25m.hw  },
+	{ .fw_name = "rco-100m" },
+	{ .hw = &twpll_128m.hw  },
+};
+static SPRD_MUX_CLK_DATA(power_cpu_clk, "power-cpu-clk", power_cpu_parents, 0x2c4,
+			 0, 2, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data ap_axi_parents[] = {
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_76m8.hw  },
+	{ .hw = &twpll_128m.hw  },
+	{ .hw = &twpll_256m.hw  },
+};
+static SPRD_MUX_CLK_DATA(ap_axi, "ap-axi", ap_axi_parents, 0x2c8,
+			 0, 2, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data sdio_parents[] = {
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_307m2.hw  },
+	{ .hw = &twpll_384m.hw  },
+	{ .hw = &rpll_390m.hw  },
+	{ .hw = &dpll1_400m.hw  },
+	{ .hw = &lpll_409m6.hw  },
+};
+static SPRD_MUX_CLK_DATA(sdio0_2x, "sdio0-2x", sdio_parents, 0x2cc,
+			 0, 3, SC9863A_MUX_FLAG);
+static SPRD_MUX_CLK_DATA(sdio1_2x, "sdio1-2x", sdio_parents, 0x2d4,
+			 0, 3, SC9863A_MUX_FLAG);
+static SPRD_MUX_CLK_DATA(sdio2_2x, "sdio2-2x", sdio_parents, 0x2dc,
+			 0, 3, SC9863A_MUX_FLAG);
+static SPRD_MUX_CLK_DATA(emmc_2x, "emmc-2x", sdio_parents, 0x2e4,
+			 0, 3, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data dpu_parents[] = {
+	{ .hw = &twpll_153m6.hw  },
+	{ .hw = &twpll_192m.hw  },
+	{ .hw = &twpll_256m.hw  },
+	{ .hw = &twpll_384m.hw  },
+};
+static SPRD_MUX_CLK_DATA(dpu_clk, "dpu", dpu_parents, 0x2f4,
+			 0, 2, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data dpu_dpi_parents[] = {
+	{ .hw = &twpll_128m.hw  },
+	{ .hw = &twpll_153m6.hw  },
+	{ .hw = &twpll_192m.hw  },
+};
+static SPRD_COMP_CLK_DATA(dpu_dpi, "dpu-dpi", dpu_dpi_parents, 0x2f8,
+			  0, 2, 8, 4, 0);
+
+static const struct clk_parent_data otg_ref_parents[] = {
+	{ .hw = &twpll_12m.hw  },
+	{ .fw_name = "ext-26m" },
+};
+static SPRD_MUX_CLK_DATA(otg_ref_clk, "otg-ref-clk", otg_ref_parents, 0x308,
+			 0, 1, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data sdphy_apb_parents[] = {
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_48m.hw  },
+};
+static SPRD_MUX_CLK_DATA(sdphy_apb_clk, "sdphy-apb-clk", sdphy_apb_parents, 0x330,
+			 0, 1, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data alg_io_apb_parents[] = {
+	{ .hw = &rco_4m.hw  },
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_48m.hw  },
+	{ .hw = &twpll_96m.hw  },
+};
+static SPRD_MUX_CLK_DATA(alg_io_apb_clk, "alg-io-apb-clk", alg_io_apb_parents, 0x33c,
+			 0, 1, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data gpu_parents[] = {
+	{ .hw = &twpll_153m6.hw  },
+	{ .hw = &twpll_192m.hw  },
+	{ .hw = &twpll_256m.hw  },
+	{ .hw = &twpll_307m2.hw  },
+	{ .hw = &twpll_384m.hw  },
+	{ .hw = &twpll_512m.hw  },
+	{ .hw = &gpll.common.hw  },
+};
+static SPRD_COMP_CLK_DATA(gpu_core, "gpu-core", gpu_parents, 0x344,
+			  0, 3, 8, 2, 0);
+static SPRD_COMP_CLK_DATA(gpu_soc, "gpu-soc", gpu_parents, 0x348,
+			  0, 3, 8, 2, 0);
+
+static const struct clk_parent_data mm_emc_parents[] = {
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_384m.hw  },
+	{ .hw = &isppll_468m.hw  },
+	{ .hw = &twpll_512m.hw  },
+};
+static SPRD_MUX_CLK_DATA(mm_emc, "mm-emc", mm_emc_parents, 0x350,
+			 0, 2, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data mm_ahb_parents[] = {
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_96m.hw  },
+	{ .hw = &twpll_128m.hw  },
+	{ .hw = &twpll_153m6.hw  },
+};
+static SPRD_MUX_CLK_DATA(mm_ahb, "mm-ahb", mm_ahb_parents, 0x354,
+			 0, 2, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data bpc_clk_parents[] = {
+	{ .hw = &twpll_192m.hw  },
+	{ .hw = &twpll_307m2.hw  },
+	{ .hw = &twpll_384m.hw  },
+	{ .hw = &isppll_468m.hw  },
+	{ .hw = &dpll0_622m3.hw  },
+};
+static SPRD_MUX_CLK_DATA(bpc_clk, "bpc-clk", bpc_clk_parents, 0x358,
+			 0, 3, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data dcam_if_parents[] = {
+	{ .hw = &twpll_192m.hw  },
+	{ .hw = &twpll_256m.hw  },
+	{ .hw = &twpll_307m2.hw  },
+	{ .hw = &twpll_384m.hw  },
+};
+static SPRD_MUX_CLK_DATA(dcam_if_clk, "dcam-if-clk", dcam_if_parents, 0x35c,
+			 0, 2, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data isp_parents[] = {
+	{ .hw = &twpll_128m.hw  },
+	{ .hw = &twpll_256m.hw  },
+	{ .hw = &twpll_307m2.hw  },
+	{ .hw = &twpll_384m.hw  },
+	{ .hw = &isppll_468m.hw  },
+};
+static SPRD_MUX_CLK_DATA(isp_clk, "isp-clk", isp_parents, 0x360,
+			 0, 3, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data jpg_parents[] = {
+	{ .hw = &twpll_76m8.hw  },
+	{ .hw = &twpll_128m.hw  },
+	{ .hw = &twpll_256m.hw  },
+	{ .hw = &twpll_307m2.hw  },
+};
+static SPRD_MUX_CLK_DATA(jpg_clk, "jpg-clk", jpg_parents, 0x364,
+			 0, 2, SC9863A_MUX_FLAG);
+static SPRD_MUX_CLK_DATA(cpp_clk, "cpp-clk", jpg_parents, 0x368,
+			 0, 2, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data sensor_parents[] = {
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_48m.hw  },
+	{ .hw = &twpll_76m8.hw  },
+	{ .hw = &twpll_96m.hw  },
+};
+static SPRD_COMP_CLK_DATA(sensor0_clk, "sensor0-clk", sensor_parents, 0x36c,
+			  0, 2, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(sensor1_clk, "sensor1-clk", sensor_parents, 0x370,
+			  0, 2, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(sensor2_clk, "sensor2-clk", sensor_parents, 0x374,
+			  0, 2, 8, 3, 0);
+
+static const struct clk_parent_data mm_vemc_parents[] = {
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_307m2.hw  },
+	{ .hw = &twpll_384m.hw  },
+	{ .hw = &isppll_468m.hw  },
+};
+static SPRD_MUX_CLK_DATA(mm_vemc, "mm-vemc", mm_vemc_parents, 0x378,
+			 0, 2, SC9863A_MUX_FLAG);
+
+static SPRD_MUX_CLK_DATA(mm_vahb, "mm-vahb", mm_ahb_parents, 0x37c,
+			 0, 2, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data vsp_parents[] = {
+	{ .hw = &twpll_76m8.hw  },
+	{ .hw = &twpll_128m.hw  },
+	{ .hw = &twpll_256m.hw  },
+	{ .hw = &twpll_307m2.hw  },
+	{ .hw = &twpll_384m.hw  },
+};
+static SPRD_MUX_CLK_DATA(clk_vsp, "vsp-clk", vsp_parents, 0x380,
+			 0, 3, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data core_parents[] = {
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_512m.hw  },
+	{ .hw = &twpll_768m.hw  },
+	{ .hw = &lpll.common.hw  },
+	{ .hw = &dpll0.common.hw  },
+	{ .hw = &mpll2.common.hw  },
+	{ .hw = &mpll0.common.hw  },
+	{ .hw = &mpll1.common.hw  },
+};
+static SPRD_COMP_CLK_DATA(core0_clk, "core0-clk", core_parents, 0xa20,
+			  0, 3, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(core1_clk, "core1-clk", core_parents, 0xa24,
+			  0, 3, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(core2_clk, "core2-clk", core_parents, 0xa28,
+			  0, 3, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(core3_clk, "core3-clk", core_parents, 0xa2c,
+			  0, 3, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(core4_clk, "core4-clk", core_parents, 0xa30,
+			  0, 3, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(core5_clk, "core5-clk", core_parents, 0xa34,
+			  0, 3, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(core6_clk, "core6-clk", core_parents, 0xa38,
+			  0, 3, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(core7_clk, "core7-clk", core_parents, 0xa3c,
+			  0, 3, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(scu_clk, "scu-clk", core_parents, 0xa40,
+			  0, 3, 8, 3, 0);
+
+static SPRD_DIV_CLK_HW(ace_clk, "ace-clk", &scu_clk.common.hw, 0xa44,
+		       8, 3, 0);
+static SPRD_DIV_CLK_HW(axi_periph_clk, "axi-periph-clk", &scu_clk.common.hw, 0xa48,
+		       8, 3, 0);
+static SPRD_DIV_CLK_HW(axi_acp_clk, "axi-acp-clk", &scu_clk.common.hw, 0xa4c,
+		       8, 3, 0);
+
+static const struct clk_parent_data atb_parents[] = {
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_384m.hw  },
+	{ .hw = &twpll_512m.hw  },
+	{ .hw = &mpll2.common.hw  },
+};
+static SPRD_COMP_CLK_DATA(atb_clk, "atb-clk", atb_parents, 0xa50,
+			  0, 2, 8, 3, 0);
+static SPRD_DIV_CLK_HW(debug_apb_clk, "debug-apb-clk", &atb_clk.common.hw, 0xa54,
+		       8, 3, 0);
+
+static const struct clk_parent_data gic_parents[] = {
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_153m6.hw  },
+	{ .hw = &twpll_384m.hw  },
+	{ .hw = &twpll_512m.hw  },
+};
+static SPRD_COMP_CLK_DATA(gic_clk, "gic-clk", gic_parents, 0xa58,
+			  0, 2, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(periph_clk, "periph-clk", gic_parents, 0xa5c,
+			  0, 2, 8, 3, 0);
+
+static struct sprd_clk_common *sc9863a_aon_clks[] = {
+	/* address base is 0x402d0000 */
+	&emc_clk.common,
+	&aon_apb.common,
+	&adi_clk.common,
+	&aux0_clk.common,
+	&aux1_clk.common,
+	&aux2_clk.common,
+	&probe_clk.common,
+	&pwm0_clk.common,
+	&pwm1_clk.common,
+	&pwm2_clk.common,
+	&aon_thm_clk.common,
+	&audif_clk.common,
+	&cpu_dap_clk.common,
+	&cpu_ts_clk.common,
+	&djtag_tck_clk.common,
+	&emc_ref_clk.common,
+	&cssys_clk.common,
+	&aon_pmu_clk.common,
+	&pmu_26m_clk.common,
+	&aon_tmr_clk.common,
+	&power_cpu_clk.common,
+	&ap_axi.common,
+	&sdio0_2x.common,
+	&sdio1_2x.common,
+	&sdio2_2x.common,
+	&emmc_2x.common,
+	&dpu_clk.common,
+	&dpu_dpi.common,
+	&otg_ref_clk.common,
+	&sdphy_apb_clk.common,
+	&alg_io_apb_clk.common,
+	&gpu_core.common,
+	&gpu_soc.common,
+	&mm_emc.common,
+	&mm_ahb.common,
+	&bpc_clk.common,
+	&dcam_if_clk.common,
+	&isp_clk.common,
+	&jpg_clk.common,
+	&cpp_clk.common,
+	&sensor0_clk.common,
+	&sensor1_clk.common,
+	&sensor2_clk.common,
+	&mm_vemc.common,
+	&mm_vahb.common,
+	&clk_vsp.common,
+	&core0_clk.common,
+	&core1_clk.common,
+	&core2_clk.common,
+	&core3_clk.common,
+	&core4_clk.common,
+	&core5_clk.common,
+	&core6_clk.common,
+	&core7_clk.common,
+	&scu_clk.common,
+	&ace_clk.common,
+	&axi_periph_clk.common,
+	&axi_acp_clk.common,
+	&atb_clk.common,
+	&debug_apb_clk.common,
+	&gic_clk.common,
+	&periph_clk.common,
+};
+
+static struct clk_hw_onecell_data sc9863a_aon_clk_hws = {
+	.hws	= {
+		[CLK_13M]		= &clk_13m.hw,
+		[CLK_6M5]		= &clk_6m5.hw,
+		[CLK_4M3]		= &clk_4m3.hw,
+		[CLK_2M]		= &clk_2m.hw,
+		[CLK_250K]		= &clk_250k.hw,
+		[CLK_RCO_25M]		= &rco_25m.hw,
+		[CLK_RCO_4M]		= &rco_4m.hw,
+		[CLK_RCO_2M]		= &rco_2m.hw,
+		[CLK_EMC]		= &emc_clk.common.hw,
+		[CLK_AON_APB]		= &aon_apb.common.hw,
+		[CLK_ADI]		= &adi_clk.common.hw,
+		[CLK_AUX0]		= &aux0_clk.common.hw,
+		[CLK_AUX1]		= &aux1_clk.common.hw,
+		[CLK_AUX2]		= &aux2_clk.common.hw,
+		[CLK_PROBE]		= &probe_clk.common.hw,
+		[CLK_PWM0]		= &pwm0_clk.common.hw,
+		[CLK_PWM1]		= &pwm1_clk.common.hw,
+		[CLK_PWM2]		= &pwm2_clk.common.hw,
+		[CLK_AON_THM]		= &aon_thm_clk.common.hw,
+		[CLK_AUDIF]		= &audif_clk.common.hw,
+		[CLK_CPU_DAP]		= &cpu_dap_clk.common.hw,
+		[CLK_CPU_TS]		= &cpu_ts_clk.common.hw,
+		[CLK_DJTAG_TCK]		= &djtag_tck_clk.common.hw,
+		[CLK_EMC_REF]		= &emc_ref_clk.common.hw,
+		[CLK_CSSYS]		= &cssys_clk.common.hw,
+		[CLK_AON_PMU]		= &aon_pmu_clk.common.hw,
+		[CLK_PMU_26M]		= &pmu_26m_clk.common.hw,
+		[CLK_AON_TMR]		= &aon_tmr_clk.common.hw,
+		[CLK_POWER_CPU]		= &power_cpu_clk.common.hw,
+		[CLK_AP_AXI]		= &ap_axi.common.hw,
+		[CLK_SDIO0_2X]		= &sdio0_2x.common.hw,
+		[CLK_SDIO1_2X]		= &sdio1_2x.common.hw,
+		[CLK_SDIO2_2X]		= &sdio2_2x.common.hw,
+		[CLK_EMMC_2X]		= &emmc_2x.common.hw,
+		[CLK_DPU]		= &dpu_clk.common.hw,
+		[CLK_DPU_DPI]		= &dpu_dpi.common.hw,
+		[CLK_OTG_REF]		= &otg_ref_clk.common.hw,
+		[CLK_SDPHY_APB]		= &sdphy_apb_clk.common.hw,
+		[CLK_ALG_IO_APB]	= &alg_io_apb_clk.common.hw,
+		[CLK_GPU_CORE]		= &gpu_core.common.hw,
+		[CLK_GPU_SOC]		= &gpu_soc.common.hw,
+		[CLK_MM_EMC]		= &mm_emc.common.hw,
+		[CLK_MM_AHB]		= &mm_ahb.common.hw,
+		[CLK_BPC]		= &bpc_clk.common.hw,
+		[CLK_DCAM_IF]		= &dcam_if_clk.common.hw,
+		[CLK_ISP]		= &isp_clk.common.hw,
+		[CLK_JPG]		= &jpg_clk.common.hw,
+		[CLK_CPP]		= &cpp_clk.common.hw,
+		[CLK_SENSOR0]		= &sensor0_clk.common.hw,
+		[CLK_SENSOR1]		= &sensor1_clk.common.hw,
+		[CLK_SENSOR2]		= &sensor2_clk.common.hw,
+		[CLK_MM_VEMC]		= &mm_vemc.common.hw,
+		[CLK_MM_VAHB]		= &mm_vahb.common.hw,
+		[CLK_VSP]		= &clk_vsp.common.hw,
+		[CLK_CORE0]		= &core0_clk.common.hw,
+		[CLK_CORE1]		= &core1_clk.common.hw,
+		[CLK_CORE2]		= &core2_clk.common.hw,
+		[CLK_CORE3]		= &core3_clk.common.hw,
+		[CLK_CORE4]		= &core4_clk.common.hw,
+		[CLK_CORE5]		= &core5_clk.common.hw,
+		[CLK_CORE6]		= &core6_clk.common.hw,
+		[CLK_CORE7]		= &core7_clk.common.hw,
+		[CLK_SCU]		= &scu_clk.common.hw,
+		[CLK_ACE]		= &ace_clk.common.hw,
+		[CLK_AXI_PERIPH]	= &axi_periph_clk.common.hw,
+		[CLK_AXI_ACP]		= &axi_acp_clk.common.hw,
+		[CLK_ATB]		= &atb_clk.common.hw,
+		[CLK_DEBUG_APB]		= &debug_apb_clk.common.hw,
+		[CLK_GIC]		= &gic_clk.common.hw,
+		[CLK_PERIPH]		= &periph_clk.common.hw,
+	},
+	.num	= CLK_AON_CLK_NUM,
+};
+
+static const struct sprd_clk_desc sc9863a_aon_clk_desc = {
+	.clk_clks	= sc9863a_aon_clks,
+	.num_clk_clks	= ARRAY_SIZE(sc9863a_aon_clks),
+	.hw_clks	= &sc9863a_aon_clk_hws,
+};
+
+static const struct clk_parent_data ap_apb_parents[] = {
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_64m.hw  },
+	{ .hw = &twpll_96m.hw  },
+	{ .hw = &twpll_128m.hw  },
+};
+static SPRD_MUX_CLK_DATA(ap_apb, "ap-apb", ap_apb_parents, 0x20,
+			 0, 2, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data ap_ce_parents[] = {
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_256m.hw  },
+};
+static SPRD_COMP_CLK_DATA(ap_ce, "ap-ce", ap_ce_parents, 0x24,
+			  0, 1, 8, 3, 0);
+
+static const struct clk_parent_data nandc_ecc_parents[] = {
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_256m.hw  },
+	{ .hw = &twpll_307m2.hw  },
+};
+static SPRD_COMP_CLK_DATA(nandc_ecc, "nandc-ecc", nandc_ecc_parents, 0x28,
+			  0, 2, 8, 3, 0);
+
+static const struct clk_parent_data nandc_26m_parents[] = {
+	{ .fw_name = "ext-32k" },
+	{ .fw_name = "ext-26m" },
+};
+static SPRD_MUX_CLK_DATA(nandc_26m, "nandc-26m", nandc_26m_parents, 0x2c,
+			 0, 1, SC9863A_MUX_FLAG);
+static SPRD_MUX_CLK_DATA(emmc_32k, "emmc-32k", nandc_26m_parents, 0x30,
+			 0, 1, SC9863A_MUX_FLAG);
+static SPRD_MUX_CLK_DATA(sdio0_32k, "sdio0-32k", nandc_26m_parents, 0x34,
+			 0, 1, SC9863A_MUX_FLAG);
+static SPRD_MUX_CLK_DATA(sdio1_32k, "sdio1-32k", nandc_26m_parents, 0x38,
+			 0, 1, SC9863A_MUX_FLAG);
+static SPRD_MUX_CLK_DATA(sdio2_32k, "sdio2-32k", nandc_26m_parents, 0x3c,
+			 0, 1, SC9863A_MUX_FLAG);
+
+static SPRD_GATE_CLK_HW(otg_utmi, "otg-utmi", &aon_apb.common.hw, 0x40,
+			BIT(16), 0, 0);
+
+static const struct clk_parent_data ap_uart_parents[] = {
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_48m.hw  },
+	{ .hw = &twpll_51m2.hw  },
+	{ .hw = &twpll_96m.hw  },
+};
+static SPRD_COMP_CLK_DATA(ap_uart0,	"ap-uart0",	ap_uart_parents, 0x44,
+			  0, 2, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(ap_uart1,	"ap-uart1",	ap_uart_parents, 0x48,
+			  0, 2, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(ap_uart2,	"ap-uart2",	ap_uart_parents, 0x4c,
+			  0, 2, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(ap_uart3,	"ap-uart3",	ap_uart_parents, 0x50,
+			  0, 2, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(ap_uart4,	"ap-uart4",	ap_uart_parents, 0x54,
+			  0, 2, 8, 3, 0);
+
+static const struct clk_parent_data i2c_parents[] = {
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_48m.hw  },
+	{ .hw = &twpll_51m2.hw  },
+	{ .hw = &twpll_153m6.hw  },
+};
+static SPRD_COMP_CLK_DATA(ap_i2c0, "ap-i2c0", i2c_parents, 0x58,
+			  0, 2, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(ap_i2c1, "ap-i2c1", i2c_parents, 0x5c,
+			  0, 2, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(ap_i2c2, "ap-i2c2", i2c_parents, 0x60,
+			  0, 2, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(ap_i2c3, "ap-i2c3", i2c_parents, 0x64,
+			  0, 2, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(ap_i2c4, "ap-i2c4", i2c_parents, 0x68,
+			  0, 2, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(ap_i2c5, "ap-i2c5", i2c_parents, 0x6c,
+			  0, 2, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(ap_i2c6, "ap-i2c6", i2c_parents, 0x70,
+			  0, 2, 8, 3, 0);
+
+static const struct clk_parent_data spi_parents[] = {
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_128m.hw  },
+	{ .hw = &twpll_153m6.hw  },
+	{ .hw = &twpll_192m.hw  },
+};
+static SPRD_COMP_CLK_DATA(ap_spi0, "ap-spi0", spi_parents, 0x74,
+			  0, 2, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(ap_spi1, "ap-spi1", spi_parents, 0x78,
+			  0, 2, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(ap_spi2, "ap-spi2", spi_parents, 0x7c,
+			  0, 2, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(ap_spi3, "ap-spi3", spi_parents, 0x80,
+			  0, 2, 8, 3, 0);
+
+static const struct clk_parent_data iis_parents[] = {
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_128m.hw  },
+	{ .hw = &twpll_153m6.hw  },
+};
+static SPRD_COMP_CLK_DATA(ap_iis0, "ap-iis0", iis_parents, 0x84,
+			  0, 2, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(ap_iis1, "ap-iis1", iis_parents, 0x88,
+			  0, 2, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(ap_iis2, "ap-iis2", iis_parents, 0x8c,
+			  0, 2, 8, 3, 0);
+
+static const struct clk_parent_data sim0_parents[] = {
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_51m2.hw  },
+	{ .hw = &twpll_64m.hw  },
+	{ .hw = &twpll_96m.hw  },
+	{ .hw = &twpll_128m.hw  },
+};
+static SPRD_COMP_CLK_DATA(sim0, "sim0", sim0_parents, 0x90,
+			  0, 3, 8, 3, 0);
+
+static const struct clk_parent_data sim0_32k_parents[] = {
+	{ .fw_name = "ext-32k" },
+	{ .fw_name = "ext-26m" },
+};
+static SPRD_MUX_CLK_DATA(sim0_32k, "sim0-32k", sim0_32k_parents, 0x94,
+			 0, 1, SC9863A_MUX_FLAG);
+
+static struct sprd_clk_common *sc9863a_ap_clks[] = {
+	/* address base is 0x21500000 */
+	&ap_apb.common,
+	&ap_ce.common,
+	&nandc_ecc.common,
+	&nandc_26m.common,
+	&emmc_32k.common,
+	&sdio0_32k.common,
+	&sdio1_32k.common,
+	&sdio2_32k.common,
+	&otg_utmi.common,
+	&ap_uart0.common,
+	&ap_uart1.common,
+	&ap_uart2.common,
+	&ap_uart3.common,
+	&ap_uart4.common,
+	&ap_i2c0.common,
+	&ap_i2c1.common,
+	&ap_i2c2.common,
+	&ap_i2c3.common,
+	&ap_i2c4.common,
+	&ap_i2c5.common,
+	&ap_i2c6.common,
+	&ap_spi0.common,
+	&ap_spi1.common,
+	&ap_spi2.common,
+	&ap_spi3.common,
+	&ap_iis0.common,
+	&ap_iis1.common,
+	&ap_iis2.common,
+	&sim0.common,
+	&sim0_32k.common,
+};
+
+static struct clk_hw_onecell_data sc9863a_ap_clk_hws = {
+	.hws	= {
+		[CLK_AP_APB]	= &ap_apb.common.hw,
+		[CLK_AP_CE]	= &ap_ce.common.hw,
+		[CLK_NANDC_ECC]	= &nandc_ecc.common.hw,
+		[CLK_NANDC_26M]	= &nandc_26m.common.hw,
+		[CLK_EMMC_32K]	= &emmc_32k.common.hw,
+		[CLK_SDIO0_32K]	= &sdio0_32k.common.hw,
+		[CLK_SDIO1_32K]	= &sdio1_32k.common.hw,
+		[CLK_SDIO2_32K]	= &sdio2_32k.common.hw,
+		[CLK_OTG_UTMI]	= &otg_utmi.common.hw,
+		[CLK_AP_UART0]	= &ap_uart0.common.hw,
+		[CLK_AP_UART1]	= &ap_uart1.common.hw,
+		[CLK_AP_UART2]	= &ap_uart2.common.hw,
+		[CLK_AP_UART3]	= &ap_uart3.common.hw,
+		[CLK_AP_UART4]	= &ap_uart4.common.hw,
+		[CLK_AP_I2C0]	= &ap_i2c0.common.hw,
+		[CLK_AP_I2C1]	= &ap_i2c1.common.hw,
+		[CLK_AP_I2C2]	= &ap_i2c2.common.hw,
+		[CLK_AP_I2C3]	= &ap_i2c3.common.hw,
+		[CLK_AP_I2C4]	= &ap_i2c4.common.hw,
+		[CLK_AP_I2C5]	= &ap_i2c5.common.hw,
+		[CLK_AP_I2C6]	= &ap_i2c6.common.hw,
+		[CLK_AP_SPI0]	= &ap_spi0.common.hw,
+		[CLK_AP_SPI1]	= &ap_spi1.common.hw,
+		[CLK_AP_SPI2]	= &ap_spi2.common.hw,
+		[CLK_AP_SPI3]	= &ap_spi3.common.hw,
+		[CLK_AP_IIS0]	= &ap_iis0.common.hw,
+		[CLK_AP_IIS1]	= &ap_iis1.common.hw,
+		[CLK_AP_IIS2]	= &ap_iis2.common.hw,
+		[CLK_SIM0]	= &sim0.common.hw,
+		[CLK_SIM0_32K]	= &sim0_32k.common.hw,
+	},
+	.num	= CLK_AP_CLK_NUM,
+};
+
+static const struct sprd_clk_desc sc9863a_ap_clk_desc = {
+	.clk_clks	= sc9863a_ap_clks,
+	.num_clk_clks	= ARRAY_SIZE(sc9863a_ap_clks),
+	.hw_clks	= &sc9863a_ap_clk_hws,
+};
+
+static SPRD_SC_GATE_CLK_HW(otg_eb, "otg-eb", &ap_axi.common.hw, 0x0, 0x1000,
+			   BIT(4), 0, 0);
+static SPRD_SC_GATE_CLK_HW(dma_eb, "dma-eb", &ap_axi.common.hw, 0x0, 0x1000,
+			   BIT(5), 0, 0);
+static SPRD_SC_GATE_CLK_HW(ce_eb, "ce-eb", &ap_axi.common.hw, 0x0, 0x1000,
+			   BIT(6), 0, 0);
+static SPRD_SC_GATE_CLK_HW(nandc_eb, "nandc-eb", &ap_axi.common.hw, 0x0, 0x1000,
+			   BIT(7), 0, 0);
+static SPRD_SC_GATE_CLK_HW(sdio0_eb, "sdio0-eb", &ap_axi.common.hw, 0x0, 0x1000,
+			   BIT(8), 0, 0);
+static SPRD_SC_GATE_CLK_HW(sdio1_eb, "sdio1-eb", &ap_axi.common.hw, 0x0, 0x1000,
+			   BIT(9), 0, 0);
+static SPRD_SC_GATE_CLK_HW(sdio2_eb, "sdio2-eb", &ap_axi.common.hw, 0x0, 0x1000,
+			   BIT(10), 0, 0);
+static SPRD_SC_GATE_CLK_HW(emmc_eb, "emmc-eb", &ap_axi.common.hw, 0x0, 0x1000,
+			   BIT(11), 0, 0);
+static SPRD_SC_GATE_CLK_HW(emmc_32k_eb, "emmc-32k-eb", &ap_axi.common.hw, 0x0,
+			   0x1000, BIT(27), 0, 0);
+static SPRD_SC_GATE_CLK_HW(sdio0_32k_eb, "sdio0-32k-eb", &ap_axi.common.hw, 0x0,
+			   0x1000, BIT(28), 0, 0);
+static SPRD_SC_GATE_CLK_HW(sdio1_32k_eb, "sdio1-32k-eb", &ap_axi.common.hw, 0x0,
+			   0x1000, BIT(29), 0, 0);
+static SPRD_SC_GATE_CLK_HW(sdio2_32k_eb, "sdio2-32k-eb", &ap_axi.common.hw, 0x0,
+			   0x1000, BIT(30), 0, 0);
+static SPRD_SC_GATE_CLK_HW(nandc_26m_eb, "nandc-26m-eb", &ap_axi.common.hw, 0x0,
+			   0x1000, BIT(31), 0, 0);
+static SPRD_SC_GATE_CLK_HW(dma_eb2, "dma-eb2", &ap_axi.common.hw, 0x18,
+			   0x1000, BIT(0), 0, 0);
+static SPRD_SC_GATE_CLK_HW(ce_eb2, "ce-eb2", &ap_axi.common.hw, 0x18,
+			   0x1000, BIT(1), 0, 0);
+
+static struct sprd_clk_common *sc9863a_apahb_gate_clks[] = {
+	/* address base is 0x20e00000 */
+	&otg_eb.common,
+	&dma_eb.common,
+	&ce_eb.common,
+	&nandc_eb.common,
+	&sdio0_eb.common,
+	&sdio1_eb.common,
+	&sdio2_eb.common,
+	&emmc_eb.common,
+	&emmc_32k_eb.common,
+	&sdio0_32k_eb.common,
+	&sdio1_32k_eb.common,
+	&sdio2_32k_eb.common,
+	&nandc_26m_eb.common,
+	&dma_eb2.common,
+	&ce_eb2.common,
+};
+
+static struct clk_hw_onecell_data sc9863a_apahb_gate_hws = {
+	.hws	= {
+		[CLK_OTG_EB]		= &otg_eb.common.hw,
+		[CLK_DMA_EB]		= &dma_eb.common.hw,
+		[CLK_CE_EB]		= &ce_eb.common.hw,
+		[CLK_NANDC_EB]		= &nandc_eb.common.hw,
+		[CLK_SDIO0_EB]		= &sdio0_eb.common.hw,
+		[CLK_SDIO1_EB]		= &sdio1_eb.common.hw,
+		[CLK_SDIO2_EB]		= &sdio2_eb.common.hw,
+		[CLK_EMMC_EB]		= &emmc_eb.common.hw,
+		[CLK_EMMC_32K_EB]	= &emmc_32k_eb.common.hw,
+		[CLK_SDIO0_32K_EB]	= &sdio0_32k_eb.common.hw,
+		[CLK_SDIO1_32K_EB]	= &sdio1_32k_eb.common.hw,
+		[CLK_SDIO2_32K_EB]	= &sdio2_32k_eb.common.hw,
+		[CLK_NANDC_26M_EB]	= &nandc_26m_eb.common.hw,
+		[CLK_DMA_EB2]		= &dma_eb2.common.hw,
+		[CLK_CE_EB2]		= &ce_eb2.common.hw,
+	},
+	.num	= CLK_AP_AHB_GATE_NUM,
+};
+
+static const struct sprd_clk_desc sc9863a_apahb_gate_desc = {
+	.clk_clks	= sc9863a_apahb_gate_clks,
+	.num_clk_clks	= ARRAY_SIZE(sc9863a_apahb_gate_clks),
+	.hw_clks	= &sc9863a_apahb_gate_hws,
+};
+
+/* aon gate clocks */
+static SPRD_SC_GATE_CLK_HW(gpio_eb, "gpio-eb",	&aon_apb.common.hw,
+			   0x0, 0x1000, BIT(3), 0, 0);
+static SPRD_SC_GATE_CLK_HW(pwm0_eb,	"pwm0-eb",	&aon_apb.common.hw,
+			   0x0, 0x1000, BIT(4), 0, 0);
+static SPRD_SC_GATE_CLK_HW(pwm1_eb,	"pwm1-eb",	&aon_apb.common.hw,
+			   0x0, 0x1000, BIT(5), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(pwm2_eb,	"pwm2-eb",	&aon_apb.common.hw, 0x0,
+			   0x1000, BIT(6), 0, 0);
+static SPRD_SC_GATE_CLK_HW(pwm3_eb,	"pwm3-eb",	&aon_apb.common.hw, 0x0,
+			   0x1000, BIT(7), 0, 0);
+static SPRD_SC_GATE_CLK_HW(kpd_eb,	"kpd-eb",	&aon_apb.common.hw, 0x0,
+			   0x1000, BIT(8), 0, 0);
+static SPRD_SC_GATE_CLK_HW(aon_syst_eb,	"aon-syst-eb",	&aon_apb.common.hw, 0x0,
+			   0x1000, BIT(9), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(ap_syst_eb,	"ap-syst-eb",	&aon_apb.common.hw, 0x0,
+			   0x1000, BIT(10), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(aon_tmr_eb,	"aon-tmr-eb",	&aon_apb.common.hw, 0x0,
+			   0x1000, BIT(11), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(efuse_eb,	"efuse-eb",	&aon_apb.common.hw, 0x0,
+			   0x1000, BIT(13), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(eic_eb,	"eic-eb",	&aon_apb.common.hw, 0x0,
+			   0x1000, BIT(14), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(intc_eb,	"intc-eb",	&aon_apb.common.hw, 0x0,
+			   0x1000, BIT(15), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(adi_eb,	"adi-eb",	&aon_apb.common.hw, 0x0,
+			   0x1000, BIT(16), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(audif_eb,	"audif-eb",	&aon_apb.common.hw, 0x0,
+			   0x1000, BIT(17), 0, 0);
+static SPRD_SC_GATE_CLK_HW(aud_eb,	"aud-eb",	&aon_apb.common.hw, 0x0,
+			   0x1000, BIT(18), 0, 0);
+static SPRD_SC_GATE_CLK_HW(vbc_eb,	"vbc-eb",	&aon_apb.common.hw, 0x0,
+			   0x1000, BIT(19), 0, 0);
+static SPRD_SC_GATE_CLK_HW(pin_eb,	"pin-eb",	&aon_apb.common.hw, 0x0,
+			   0x1000, BIT(20), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(ap_wdg_eb,	"ap-wdg-eb",	&aon_apb.common.hw, 0x0,
+			   0x1000, BIT(24), 0, 0);
+static SPRD_SC_GATE_CLK_HW(mm_eb,	"mm-eb",	&aon_apb.common.hw, 0x0,
+			   0x1000, BIT(25), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(aon_apb_ckg_eb, "aon-apb-ckg-eb", &aon_apb.common.hw,
+			   0x0, 0x1000, BIT(26), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(ca53_ts0_eb, "ca53-ts0-eb",	&aon_apb.common.hw,
+			   0x0, 0x1000, BIT(28), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(ca53_ts1_eb, "ca53-ts1-eb",	&aon_apb.common.hw,
+			   0x0, 0x1000, BIT(29), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(ca53_dap_eb, "ca53-dap-eb",	&aon_apb.common.hw,
+			   0x0, 0x1000, BIT(30), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(pmu_eb,	"pmu-eb",	&aon_apb.common.hw,
+			   0x4, 0x1000, BIT(0), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(thm_eb,	"thm-eb",	&aon_apb.common.hw,
+			   0x4, 0x1000, BIT(1), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(aux0_eb,	"aux0-eb",	&aon_apb.common.hw,
+			   0x4, 0x1000, BIT(2), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(aux1_eb,	"aux1-eb",	&aon_apb.common.hw,
+			   0x4, 0x1000, BIT(3), 0, 0);
+static SPRD_SC_GATE_CLK_HW(aux2_eb,	"aux2-eb",	&aon_apb.common.hw,
+			   0x4, 0x1000, BIT(4), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(probe_eb,	"probe-eb",	&aon_apb.common.hw,
+			   0x4, 0x1000, BIT(5), 0, 0);
+static SPRD_SC_GATE_CLK_HW(emc_ref_eb,	"emc-ref-eb",	&aon_apb.common.hw,
+			   0x4, 0x1000, BIT(7), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(ca53_wdg_eb,	"ca53-wdg-eb",	&aon_apb.common.hw,
+			   0x4, 0x1000, BIT(8), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(ap_tmr1_eb,	"ap-tmr1-eb",	&aon_apb.common.hw,
+			   0x4, 0x1000, BIT(9), 0, 0);
+static SPRD_SC_GATE_CLK_HW(ap_tmr2_eb,	"ap-tmr2-eb",	&aon_apb.common.hw,
+			   0x4, 0x1000, BIT(10), 0, 0);
+static SPRD_SC_GATE_CLK_HW(disp_emc_eb,	"disp-emc-eb",	&aon_apb.common.hw,
+			   0x4, 0x1000, BIT(11), 0, 0);
+static SPRD_SC_GATE_CLK_HW(zip_emc_eb,	"zip-emc-eb",	&aon_apb.common.hw,
+			   0x4, 0x1000, BIT(12), 0, 0);
+static SPRD_SC_GATE_CLK_HW(gsp_emc_eb,	"gsp-emc-eb",	&aon_apb.common.hw,
+			   0x4, 0x1000, BIT(13), 0, 0);
+static SPRD_SC_GATE_CLK_HW(mm_vsp_eb,	"mm-vsp-eb",	&aon_apb.common.hw,
+			   0x4, 0x1000, BIT(14), 0, 0);
+static SPRD_SC_GATE_CLK_HW(mdar_eb,	"mdar-eb",	&aon_apb.common.hw,
+			   0x4, 0x1000, BIT(17), 0, 0);
+static SPRD_SC_GATE_CLK_HW(rtc4m0_cal_eb, "rtc4m0-cal-eb", &aon_apb.common.hw,
+			   0x4, 0x1000, BIT(18), 0, 0);
+static SPRD_SC_GATE_CLK_HW(rtc4m1_cal_eb, "rtc4m1-cal-eb", &aon_apb.common.hw,
+			   0x4, 0x1000, BIT(19), 0, 0);
+static SPRD_SC_GATE_CLK_HW(djtag_eb,	"djtag-eb",	&aon_apb.common.hw,
+			   0x4, 0x1000, BIT(20), 0, 0);
+static SPRD_SC_GATE_CLK_HW(mbox_eb,	"mbox-eb",	&aon_apb.common.hw,
+			   0x4, 0x1000, BIT(21), 0, 0);
+static SPRD_SC_GATE_CLK_HW(aon_dma_eb,	"aon-dma-eb",	&aon_apb.common.hw,
+			   0x4, 0x1000, BIT(22), 0, 0);
+static SPRD_SC_GATE_CLK_HW(aon_apb_def_eb, "aon-apb-def-eb", &aon_apb.common.hw,
+			   0x4, 0x1000, BIT(25), 0, 0);
+static SPRD_SC_GATE_CLK_HW(ca5_ts0_eb,	"ca5-ts0-eb",	&aon_apb.common.hw,
+			   0x4, 0x1000, BIT(26), 0, 0);
+static SPRD_SC_GATE_CLK_HW(dbg_eb,	"dbg-eb",	&aon_apb.common.hw,
+			   0x4, 0x1000, BIT(28), 0, 0);
+static SPRD_SC_GATE_CLK_HW(dbg_emc_eb,	"dbg-emc-eb",	&aon_apb.common.hw,
+			   0x4, 0x1000, BIT(29), 0, 0);
+static SPRD_SC_GATE_CLK_HW(cross_trig_eb, "cross-trig-eb", &aon_apb.common.hw,
+			   0x4, 0x1000, BIT(30), 0, 0);
+static SPRD_SC_GATE_CLK_HW(serdes_dphy_eb, "serdes-dphy-eb", &aon_apb.common.hw,
+			   0x4, 0x1000, BIT(31), 0, 0);
+static SPRD_SC_GATE_CLK_HW(arch_rtc_eb,	"arch-rtc-eb",	&aon_apb.common.hw,
+			   0x10, 0x1000, BIT(0), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(kpd_rtc_eb,	"kpd-rtc-eb",	&aon_apb.common.hw,
+			   0x10, 0x1000, BIT(1), 0, 0);
+static SPRD_SC_GATE_CLK_HW(aon_syst_rtc_eb, "aon-syst-rtc-eb", &aon_apb.common.hw,
+			   0x10, 0x1000, BIT(2), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(ap_syst_rtc_eb, "ap-syst-rtc-eb", &aon_apb.common.hw,
+			   0x10, 0x1000, BIT(3), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(aon_tmr_rtc_eb, "aon-tmr-rtc-eb", &aon_apb.common.hw,
+			   0x10, 0x1000, BIT(4), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(ap_tmr0_rtc_eb, "ap-tmr0-rtc-eb", &aon_apb.common.hw,
+			   0x10, 0x1000, BIT(5), 0, 0);
+static SPRD_SC_GATE_CLK_HW(eic_rtc_eb, "eic-rtc-eb",	&aon_apb.common.hw,
+			   0x10, 0x1000, BIT(6), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(eic_rtcdv5_eb, "eic-rtcdv5-eb", &aon_apb.common.hw,
+			   0x10, 0x1000, BIT(7), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(ap_wdg_rtc_eb, "ap-wdg-rtc-eb", &aon_apb.common.hw,
+			   0x10, 0x1000, BIT(8), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(ca53_wdg_rtc_eb, "ca53-wdg-rtc-eb", &aon_apb.common.hw,
+			   0x10, 0x1000, BIT(9), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(thm_rtc_eb, "thm-rtc-eb",	&aon_apb.common.hw,
+			   0x10, 0x1000, BIT(10), 0, 0);
+static SPRD_SC_GATE_CLK_HW(athma_rtc_eb, "athma-rtc-eb", &aon_apb.common.hw,
+			   0x10, 0x1000, BIT(11), 0, 0);
+static SPRD_SC_GATE_CLK_HW(gthma_rtc_eb, "gthma-rtc-eb", &aon_apb.common.hw,
+			   0x10, 0x1000, BIT(12), 0, 0);
+static SPRD_SC_GATE_CLK_HW(athma_rtc_a_eb, "athma-rtc-a-eb", &aon_apb.common.hw,
+			   0x10, 0x1000, BIT(13), 0, 0);
+static SPRD_SC_GATE_CLK_HW(gthma_rtc_a_eb, "gthma-rtc-a-eb", &aon_apb.common.hw,
+			   0x10, 0x1000, BIT(14), 0, 0);
+static SPRD_SC_GATE_CLK_HW(ap_tmr1_rtc_eb, "ap-tmr1-rtc-eb", &aon_apb.common.hw,
+			   0x10, 0x1000, BIT(15), 0, 0);
+static SPRD_SC_GATE_CLK_HW(ap_tmr2_rtc_eb, "ap-tmr2-rtc-eb", &aon_apb.common.hw,
+			   0x10, 0x1000, BIT(16), 0, 0);
+static SPRD_SC_GATE_CLK_HW(dxco_lc_rtc_eb, "dxco-lc-rtc-eb", &aon_apb.common.hw,
+			   0x10, 0x1000, BIT(17), 0, 0);
+static SPRD_SC_GATE_CLK_HW(bb_cal_rtc_eb, "bb-cal-rtc-eb", &aon_apb.common.hw,
+			   0x10, 0x1000, BIT(18), 0, 0);
+static SPRD_SC_GATE_CLK_HW(gpu_eb, "gpu-eb", &aon_apb.common.hw, 0x50,
+			   0x1000, BIT(0), 0, 0);
+static SPRD_SC_GATE_CLK_HW(disp_eb, "disp-eb", &aon_apb.common.hw, 0x50,
+			   0x1000, BIT(2), 0, 0);
+static SPRD_SC_GATE_CLK_HW(mm_emc_eb, "mm-emc-eb", &aon_apb.common.hw, 0x50,
+			   0x1000, BIT(3), 0, 0);
+static SPRD_SC_GATE_CLK_HW(power_cpu_eb, "power-cpu-eb", &aon_apb.common.hw, 0x50,
+			   0x1000, BIT(10), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(hw_i2c_eb, "hw-i2c-eb", &aon_apb.common.hw, 0x50,
+			   0x1000, BIT(11), 0, 0);
+static SPRD_SC_GATE_CLK_HW(mm_vsp_emc_eb, "mm-vsp-emc-eb", &aon_apb.common.hw, 0x50,
+			   0x1000, BIT(14), 0, 0);
+static SPRD_SC_GATE_CLK_HW(vsp_eb, "vsp-eb", &aon_apb.common.hw, 0x50,
+			   0x1000, BIT(16), 0, 0);
+static SPRD_SC_GATE_CLK_HW(cssys_eb, "cssys-eb", &aon_apb.common.hw, 0xb0,
+			   0x1000, BIT(4), 0, 0);
+static SPRD_SC_GATE_CLK_HW(dmc_eb, "dmc-eb", &aon_apb.common.hw, 0xb0,
+			   0x1000, BIT(5), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(rosc_eb, "rosc-eb", &aon_apb.common.hw, 0xb0,
+			   0x1000, BIT(7), 0, 0);
+static SPRD_SC_GATE_CLK_HW(s_d_cfg_eb, "s-d-cfg-eb", &aon_apb.common.hw, 0xb0,
+			   0x1000, BIT(8), 0, 0);
+static SPRD_SC_GATE_CLK_HW(s_d_ref_eb, "s-d-ref-eb", &aon_apb.common.hw, 0xb0,
+			   0x1000, BIT(9), 0, 0);
+static SPRD_SC_GATE_CLK_HW(b_dma_eb, "b-dma-eb", &aon_apb.common.hw, 0xb0,
+			   0x1000, BIT(10), 0, 0);
+static SPRD_SC_GATE_CLK_HW(anlg_eb, "anlg-eb", &aon_apb.common.hw, 0xb0,
+			   0x1000, BIT(11), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(anlg_apb_eb, "anlg-apb-eb", &aon_apb.common.hw, 0xb0,
+			   0x1000, BIT(13), 0, 0);
+static SPRD_SC_GATE_CLK_HW(bsmtmr_eb, "bsmtmr-eb", &aon_apb.common.hw, 0xb0,
+			   0x1000, BIT(14), 0, 0);
+static SPRD_SC_GATE_CLK_HW(ap_axi_eb, "ap-axi-eb", &aon_apb.common.hw, 0xb0,
+			   0x1000, BIT(15), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(ap_intc0_eb, "ap-intc0-eb", &aon_apb.common.hw, 0xb0,
+			   0x1000, BIT(16), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(ap_intc1_eb, "ap-intc1-eb", &aon_apb.common.hw, 0xb0,
+			   0x1000, BIT(17), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(ap_intc2_eb, "ap-intc2-eb", &aon_apb.common.hw, 0xb0,
+			   0x1000, BIT(18), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(ap_intc3_eb, "ap-intc3-eb", &aon_apb.common.hw, 0xb0,
+			   0x1000, BIT(19), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(ap_intc4_eb, "ap-intc4-eb", &aon_apb.common.hw, 0xb0,
+			   0x1000, BIT(20), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(ap_intc5_eb, "ap-intc5-eb", &aon_apb.common.hw, 0xb0,
+			   0x1000, BIT(21), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(scc_eb, "scc-eb", &aon_apb.common.hw, 0xb0,
+			   0x1000, BIT(22), 0, 0);
+static SPRD_SC_GATE_CLK_HW(dphy_cfg_eb, "dphy-cfg-eb", &aon_apb.common.hw, 0xb0,
+			   0x1000, BIT(23), 0, 0);
+static SPRD_SC_GATE_CLK_HW(dphy_ref_eb, "dphy-ref-eb", &aon_apb.common.hw, 0xb0,
+			   0x1000, BIT(24), 0, 0);
+static SPRD_SC_GATE_CLK_HW(cphy_cfg_eb, "cphy-cfg-eb", &aon_apb.common.hw, 0xb0,
+			   0x1000, BIT(25), 0, 0);
+static SPRD_SC_GATE_CLK_HW(otg_ref_eb, "otg-ref-eb", &aon_apb.common.hw, 0xb0,
+			   0x1000, BIT(26), 0, 0);
+static SPRD_SC_GATE_CLK_HW(serdes_eb, "serdes-eb", &aon_apb.common.hw, 0xb0,
+			   0x1000, BIT(27), 0, 0);
+static SPRD_SC_GATE_CLK_HW(aon_ap_emc_eb, "aon-ap-emc-eb", &aon_apb.common.hw, 0xb0,
+			   0x1000, BIT(28), 0, 0);
+static struct sprd_clk_common *sc9863a_aonapb_gate_clks[] = {
+	/* address base is 0x402e0000 */
+	&gpio_eb.common,
+	&pwm0_eb.common,
+	&pwm1_eb.common,
+	&pwm2_eb.common,
+	&pwm3_eb.common,
+	&kpd_eb.common,
+	&aon_syst_eb.common,
+	&ap_syst_eb.common,
+	&aon_tmr_eb.common,
+	&efuse_eb.common,
+	&eic_eb.common,
+	&intc_eb.common,
+	&adi_eb.common,
+	&audif_eb.common,
+	&aud_eb.common,
+	&vbc_eb.common,
+	&pin_eb.common,
+	&ap_wdg_eb.common,
+	&mm_eb.common,
+	&aon_apb_ckg_eb.common,
+	&ca53_ts0_eb.common,
+	&ca53_ts1_eb.common,
+	&ca53_dap_eb.common,
+	&pmu_eb.common,
+	&thm_eb.common,
+	&aux0_eb.common,
+	&aux1_eb.common,
+	&aux2_eb.common,
+	&probe_eb.common,
+	&emc_ref_eb.common,
+	&ca53_wdg_eb.common,
+	&ap_tmr1_eb.common,
+	&ap_tmr2_eb.common,
+	&disp_emc_eb.common,
+	&zip_emc_eb.common,
+	&gsp_emc_eb.common,
+	&mm_vsp_eb.common,
+	&mdar_eb.common,
+	&rtc4m0_cal_eb.common,
+	&rtc4m1_cal_eb.common,
+	&djtag_eb.common,
+	&mbox_eb.common,
+	&aon_dma_eb.common,
+	&aon_apb_def_eb.common,
+	&ca5_ts0_eb.common,
+	&dbg_eb.common,
+	&dbg_emc_eb.common,
+	&cross_trig_eb.common,
+	&serdes_dphy_eb.common,
+	&arch_rtc_eb.common,
+	&kpd_rtc_eb.common,
+	&aon_syst_rtc_eb.common,
+	&ap_syst_rtc_eb.common,
+	&aon_tmr_rtc_eb.common,
+	&ap_tmr0_rtc_eb.common,
+	&eic_rtc_eb.common,
+	&eic_rtcdv5_eb.common,
+	&ap_wdg_rtc_eb.common,
+	&ca53_wdg_rtc_eb.common,
+	&thm_rtc_eb.common,
+	&athma_rtc_eb.common,
+	&gthma_rtc_eb.common,
+	&athma_rtc_a_eb.common,
+	&gthma_rtc_a_eb.common,
+	&ap_tmr1_rtc_eb.common,
+	&ap_tmr2_rtc_eb.common,
+	&dxco_lc_rtc_eb.common,
+	&bb_cal_rtc_eb.common,
+	&gpu_eb.common,
+	&disp_eb.common,
+	&mm_emc_eb.common,
+	&power_cpu_eb.common,
+	&hw_i2c_eb.common,
+	&mm_vsp_emc_eb.common,
+	&vsp_eb.common,
+	&cssys_eb.common,
+	&dmc_eb.common,
+	&rosc_eb.common,
+	&s_d_cfg_eb.common,
+	&s_d_ref_eb.common,
+	&b_dma_eb.common,
+	&anlg_eb.common,
+	&anlg_apb_eb.common,
+	&bsmtmr_eb.common,
+	&ap_axi_eb.common,
+	&ap_intc0_eb.common,
+	&ap_intc1_eb.common,
+	&ap_intc2_eb.common,
+	&ap_intc3_eb.common,
+	&ap_intc4_eb.common,
+	&ap_intc5_eb.common,
+	&scc_eb.common,
+	&dphy_cfg_eb.common,
+	&dphy_ref_eb.common,
+	&cphy_cfg_eb.common,
+	&otg_ref_eb.common,
+	&serdes_eb.common,
+	&aon_ap_emc_eb.common,
+};
+
+static struct clk_hw_onecell_data sc9863a_aonapb_gate_hws = {
+	.hws	= {
+		[CLK_GPIO_EB]		= &gpio_eb.common.hw,
+		[CLK_PWM0_EB]		= &pwm0_eb.common.hw,
+		[CLK_PWM1_EB]		= &pwm1_eb.common.hw,
+		[CLK_PWM2_EB]		= &pwm2_eb.common.hw,
+		[CLK_PWM3_EB]		= &pwm3_eb.common.hw,
+		[CLK_KPD_EB]		= &kpd_eb.common.hw,
+		[CLK_AON_SYST_EB]	= &aon_syst_eb.common.hw,
+		[CLK_AP_SYST_EB]	= &ap_syst_eb.common.hw,
+		[CLK_AON_TMR_EB]	= &aon_tmr_eb.common.hw,
+		[CLK_EFUSE_EB]		= &efuse_eb.common.hw,
+		[CLK_EIC_EB]		= &eic_eb.common.hw,
+		[CLK_INTC_EB]		= &intc_eb.common.hw,
+		[CLK_ADI_EB]		= &adi_eb.common.hw,
+		[CLK_AUDIF_EB]		= &audif_eb.common.hw,
+		[CLK_AUD_EB]		= &aud_eb.common.hw,
+		[CLK_VBC_EB]		= &vbc_eb.common.hw,
+		[CLK_PIN_EB]		= &pin_eb.common.hw,
+		[CLK_AP_WDG_EB]		= &ap_wdg_eb.common.hw,
+		[CLK_MM_EB]		= &mm_eb.common.hw,
+		[CLK_AON_APB_CKG_EB]	= &aon_apb_ckg_eb.common.hw,
+		[CLK_CA53_TS0_EB]	= &ca53_ts0_eb.common.hw,
+		[CLK_CA53_TS1_EB]	= &ca53_ts1_eb.common.hw,
+		[CLK_CS53_DAP_EB]	= &ca53_dap_eb.common.hw,
+		[CLK_PMU_EB]		= &pmu_eb.common.hw,
+		[CLK_THM_EB]		= &thm_eb.common.hw,
+		[CLK_AUX0_EB]		= &aux0_eb.common.hw,
+		[CLK_AUX1_EB]		= &aux1_eb.common.hw,
+		[CLK_AUX2_EB]		= &aux2_eb.common.hw,
+		[CLK_PROBE_EB]		= &probe_eb.common.hw,
+		[CLK_EMC_REF_EB]	= &emc_ref_eb.common.hw,
+		[CLK_CA53_WDG_EB]	= &ca53_wdg_eb.common.hw,
+		[CLK_AP_TMR1_EB]	= &ap_tmr1_eb.common.hw,
+		[CLK_AP_TMR2_EB]	= &ap_tmr2_eb.common.hw,
+		[CLK_DISP_EMC_EB]	= &disp_emc_eb.common.hw,
+		[CLK_ZIP_EMC_EB]	= &zip_emc_eb.common.hw,
+		[CLK_GSP_EMC_EB]	= &gsp_emc_eb.common.hw,
+		[CLK_MM_VSP_EB]		= &mm_vsp_eb.common.hw,
+		[CLK_MDAR_EB]		= &mdar_eb.common.hw,
+		[CLK_RTC4M0_CAL_EB]	= &rtc4m0_cal_eb.common.hw,
+		[CLK_RTC4M1_CAL_EB]	= &rtc4m1_cal_eb.common.hw,
+		[CLK_DJTAG_EB]		= &djtag_eb.common.hw,
+		[CLK_MBOX_EB]		= &mbox_eb.common.hw,
+		[CLK_AON_DMA_EB]	= &aon_dma_eb.common.hw,
+		[CLK_AON_APB_DEF_EB]	= &aon_apb_def_eb.common.hw,
+		[CLK_CA5_TS0_EB]	= &ca5_ts0_eb.common.hw,
+		[CLK_DBG_EB]		= &dbg_eb.common.hw,
+		[CLK_DBG_EMC_EB]	= &dbg_emc_eb.common.hw,
+		[CLK_CROSS_TRIG_EB]	= &cross_trig_eb.common.hw,
+		[CLK_SERDES_DPHY_EB]	= &serdes_dphy_eb.common.hw,
+		[CLK_ARCH_RTC_EB]	= &arch_rtc_eb.common.hw,
+		[CLK_KPD_RTC_EB]	= &kpd_rtc_eb.common.hw,
+		[CLK_AON_SYST_RTC_EB]	= &aon_syst_rtc_eb.common.hw,
+		[CLK_AP_SYST_RTC_EB]	= &ap_syst_rtc_eb.common.hw,
+		[CLK_AON_TMR_RTC_EB]	= &aon_tmr_rtc_eb.common.hw,
+		[CLK_AP_TMR0_RTC_EB]	= &ap_tmr0_rtc_eb.common.hw,
+		[CLK_EIC_RTC_EB]	= &eic_rtc_eb.common.hw,
+		[CLK_EIC_RTCDV5_EB]	= &eic_rtcdv5_eb.common.hw,
+		[CLK_AP_WDG_RTC_EB]	= &ap_wdg_rtc_eb.common.hw,
+		[CLK_CA53_WDG_RTC_EB]	= &ca53_wdg_rtc_eb.common.hw,
+		[CLK_THM_RTC_EB]	= &thm_rtc_eb.common.hw,
+		[CLK_ATHMA_RTC_EB]	= &athma_rtc_eb.common.hw,
+		[CLK_GTHMA_RTC_EB]	= &gthma_rtc_eb.common.hw,
+		[CLK_ATHMA_RTC_A_EB]	= &athma_rtc_a_eb.common.hw,
+		[CLK_GTHMA_RTC_A_EB]	= &gthma_rtc_a_eb.common.hw,
+		[CLK_AP_TMR1_RTC_EB]	= &ap_tmr1_rtc_eb.common.hw,
+		[CLK_AP_TMR2_RTC_EB]	= &ap_tmr2_rtc_eb.common.hw,
+		[CLK_DXCO_LC_RTC_EB]	= &dxco_lc_rtc_eb.common.hw,
+		[CLK_BB_CAL_RTC_EB]	= &bb_cal_rtc_eb.common.hw,
+		[CLK_GNU_EB]		= &gpu_eb.common.hw,
+		[CLK_DISP_EB]		= &disp_eb.common.hw,
+		[CLK_MM_EMC_EB]		= &mm_emc_eb.common.hw,
+		[CLK_POWER_CPU_EB]	= &power_cpu_eb.common.hw,
+		[CLK_HW_I2C_EB]		= &hw_i2c_eb.common.hw,
+		[CLK_MM_VSP_EMC_EB]	= &mm_vsp_emc_eb.common.hw,
+		[CLK_VSP_EB]		= &vsp_eb.common.hw,
+		[CLK_CSSYS_EB]		= &cssys_eb.common.hw,
+		[CLK_DMC_EB]		= &dmc_eb.common.hw,
+		[CLK_ROSC_EB]		= &rosc_eb.common.hw,
+		[CLK_S_D_CFG_EB]	= &s_d_cfg_eb.common.hw,
+		[CLK_S_D_REF_EB]	= &s_d_ref_eb.common.hw,
+		[CLK_B_DMA_EB]		= &b_dma_eb.common.hw,
+		[CLK_ANLG_EB]		= &anlg_eb.common.hw,
+		[CLK_ANLG_APB_EB]	= &anlg_apb_eb.common.hw,
+		[CLK_BSMTMR_EB]		= &bsmtmr_eb.common.hw,
+		[CLK_AP_AXI_EB]		= &ap_axi_eb.common.hw,
+		[CLK_AP_INTC0_EB]	= &ap_intc0_eb.common.hw,
+		[CLK_AP_INTC1_EB]	= &ap_intc1_eb.common.hw,
+		[CLK_AP_INTC2_EB]	= &ap_intc2_eb.common.hw,
+		[CLK_AP_INTC3_EB]	= &ap_intc3_eb.common.hw,
+		[CLK_AP_INTC4_EB]	= &ap_intc4_eb.common.hw,
+		[CLK_AP_INTC5_EB]	= &ap_intc5_eb.common.hw,
+		[CLK_SCC_EB]		= &scc_eb.common.hw,
+		[CLK_DPHY_CFG_EB]	= &dphy_cfg_eb.common.hw,
+		[CLK_DPHY_REF_EB]	= &dphy_ref_eb.common.hw,
+		[CLK_CPHY_CFG_EB]	= &cphy_cfg_eb.common.hw,
+		[CLK_OTG_REF_EB]	= &otg_ref_eb.common.hw,
+		[CLK_SERDES_EB]		= &serdes_eb.common.hw,
+		[CLK_AON_AP_EMC_EB]	= &aon_ap_emc_eb.common.hw,
+	},
+	.num	= CLK_AON_APB_GATE_NUM,
+};
+
+static const struct sprd_clk_desc sc9863a_aonapb_gate_desc = {
+	.clk_clks	= sc9863a_aonapb_gate_clks,
+	.num_clk_clks	= ARRAY_SIZE(sc9863a_aonapb_gate_clks),
+	.hw_clks	= &sc9863a_aonapb_gate_hws,
+};
+
+/* mm gate clocks */
+static SPRD_SC_GATE_CLK_HW(mahb_ckg_eb, "mahb-ckg-eb", &mm_ahb.common.hw, 0x0, 0x1000,
+			   BIT(0), 0, 0);
+static SPRD_SC_GATE_CLK_HW(mdcam_eb, "mdcam-eb", &mm_ahb.common.hw, 0x0, 0x1000,
+			   BIT(1), 0, 0);
+static SPRD_SC_GATE_CLK_HW(misp_eb, "misp-eb", &mm_ahb.common.hw, 0x0, 0x1000,
+			   BIT(2), 0, 0);
+static SPRD_SC_GATE_CLK_HW(mahbcsi_eb, "mahbcsi-eb", &mm_ahb.common.hw, 0x0, 0x1000,
+			   BIT(3), 0, 0);
+static SPRD_SC_GATE_CLK_HW(mcsi_s_eb, "mcsi-s-eb", &mm_ahb.common.hw, 0x0, 0x1000,
+			   BIT(4), 0, 0);
+static SPRD_SC_GATE_CLK_HW(mcsi_t_eb, "mcsi-t-eb", &mm_ahb.common.hw, 0x0, 0x1000,
+			   BIT(5), 0, 0);
+static SPRD_GATE_CLK_HW(dcam_axi_eb, "dcam-axi-eb", &mm_ahb.common.hw, 0x8,
+			BIT(0), 0, 0);
+static SPRD_GATE_CLK_HW(isp_axi_eb, "isp-axi-eb", &mm_ahb.common.hw, 0x8,
+			BIT(1), 0, 0);
+static SPRD_GATE_CLK_HW(mcsi_eb, "mcsi-eb", &mm_ahb.common.hw, 0x8,
+			BIT(2), 0, 0);
+static SPRD_GATE_CLK_HW(mcsi_s_ckg_eb, "mcsi-s-ckg-eb", &mm_ahb.common.hw, 0x8,
+			BIT(3), 0, 0);
+static SPRD_GATE_CLK_HW(mcsi_t_ckg_eb, "mcsi-t-ckg-eb", &mm_ahb.common.hw, 0x8,
+			BIT(4), 0, 0);
+static SPRD_GATE_CLK_HW(sensor0_eb, "sensor0-eb", &mm_ahb.common.hw, 0x8,
+			BIT(5), 0, 0);
+static SPRD_GATE_CLK_HW(sensor1_eb, "sensor1-eb", &mm_ahb.common.hw, 0x8,
+			BIT(6), 0, 0);
+static SPRD_GATE_CLK_HW(sensor2_eb, "sensor2-eb", &mm_ahb.common.hw, 0x8,
+			BIT(7), 0, 0);
+static SPRD_GATE_CLK_HW(mcphy_cfg_eb, "mcphy-cfg-eb", &mm_ahb.common.hw, 0x8,
+			BIT(8), 0, 0);
+
+static struct sprd_clk_common *sc9863a_mm_gate_clks[] = {
+	/* address base is 0x60800000 */
+	&mahb_ckg_eb.common,
+	&mdcam_eb.common,
+	&misp_eb.common,
+	&mahbcsi_eb.common,
+	&mcsi_s_eb.common,
+	&mcsi_t_eb.common,
+	&dcam_axi_eb.common,
+	&isp_axi_eb.common,
+	&mcsi_eb.common,
+	&mcsi_s_ckg_eb.common,
+	&mcsi_t_ckg_eb.common,
+	&sensor0_eb.common,
+	&sensor1_eb.common,
+	&sensor2_eb.common,
+	&mcphy_cfg_eb.common,
+};
+
+static struct clk_hw_onecell_data sc9863a_mm_gate_hws = {
+	.hws	= {
+		[CLK_MAHB_CKG_EB]	= &mahb_ckg_eb.common.hw,
+		[CLK_MDCAM_EB]		= &mdcam_eb.common.hw,
+		[CLK_MISP_EB]		= &misp_eb.common.hw,
+		[CLK_MAHBCSI_EB]	= &mahbcsi_eb.common.hw,
+		[CLK_MCSI_S_EB]		= &mcsi_s_eb.common.hw,
+		[CLK_MCSI_T_EB]		= &mcsi_t_eb.common.hw,
+		[CLK_DCAM_AXI_EB]	= &dcam_axi_eb.common.hw,
+		[CLK_ISP_AXI_EB]	= &isp_axi_eb.common.hw,
+		[CLK_MCSI_EB]		= &mcsi_eb.common.hw,
+		[CLK_MCSI_S_CKG_EB]	= &mcsi_s_ckg_eb.common.hw,
+		[CLK_MCSI_T_CKG_EB]	= &mcsi_t_ckg_eb.common.hw,
+		[CLK_SENSOR0_EB]	= &sensor0_eb.common.hw,
+		[CLK_SENSOR1_EB]	= &sensor1_eb.common.hw,
+		[CLK_SENSOR2_EB]	= &sensor2_eb.common.hw,
+		[CLK_MCPHY_CFG_EB]	= &mcphy_cfg_eb.common.hw,
+	},
+	.num	= CLK_MM_GATE_NUM,
+};
+
+static const struct sprd_clk_desc sc9863a_mm_gate_desc = {
+	.clk_clks	= sc9863a_mm_gate_clks,
+	.num_clk_clks	= ARRAY_SIZE(sc9863a_mm_gate_clks),
+	.hw_clks	= &sc9863a_mm_gate_hws,
+};
+
+static SPRD_SC_GATE_CLK_FW_NAME(sim0_eb,	"sim0-eb",	"ext-26m", 0x0,
+				0x1000, BIT(0), 0, 0);
+static SPRD_SC_GATE_CLK_FW_NAME(iis0_eb,	"iis0-eb",	"ext-26m", 0x0,
+				0x1000, BIT(1), 0, 0);
+static SPRD_SC_GATE_CLK_FW_NAME(iis1_eb,	"iis1-eb",	"ext-26m", 0x0,
+				0x1000, BIT(2), 0, 0);
+static SPRD_SC_GATE_CLK_FW_NAME(iis2_eb,	"iis2-eb",	"ext-26m", 0x0,
+				0x1000, BIT(3), 0, 0);
+static SPRD_SC_GATE_CLK_FW_NAME(spi0_eb,	"spi0-eb",	"ext-26m", 0x0,
+				0x1000, BIT(5), 0, 0);
+static SPRD_SC_GATE_CLK_FW_NAME(spi1_eb,	"spi1-eb",	"ext-26m", 0x0,
+				0x1000, BIT(6), 0, 0);
+static SPRD_SC_GATE_CLK_FW_NAME(spi2_eb,	"spi2-eb",	"ext-26m", 0x0,
+				0x1000, BIT(7), 0, 0);
+static SPRD_SC_GATE_CLK_FW_NAME(i2c0_eb,	"i2c0-eb",	"ext-26m", 0x0,
+				0x1000, BIT(8), 0, 0);
+static SPRD_SC_GATE_CLK_FW_NAME(i2c1_eb,	"i2c1-eb",	"ext-26m", 0x0,
+				0x1000, BIT(9), 0, 0);
+static SPRD_SC_GATE_CLK_FW_NAME(i2c2_eb,	"i2c2-eb",	"ext-26m", 0x0,
+				0x1000, BIT(10), 0, 0);
+static SPRD_SC_GATE_CLK_FW_NAME(i2c3_eb,	"i2c3-eb",	"ext-26m", 0x0,
+				0x1000, BIT(11), 0, 0);
+static SPRD_SC_GATE_CLK_FW_NAME(i2c4_eb,	"i2c4-eb",	"ext-26m", 0x0,
+				0x1000, BIT(12), 0, 0);
+static SPRD_SC_GATE_CLK_FW_NAME(uart0_eb,	"uart0-eb",	"ext-26m", 0x0,
+				0x1000, BIT(13), 0, 0);
+/* uart1_eb is for console, don't gate even if unused */
+static SPRD_SC_GATE_CLK_FW_NAME(uart1_eb,	"uart1-eb",	"ext-26m", 0x0,
+				0x1000, BIT(14), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_FW_NAME(uart2_eb,	"uart2-eb",	"ext-26m", 0x0,
+				0x1000, BIT(15), 0, 0);
+static SPRD_SC_GATE_CLK_FW_NAME(uart3_eb,	"uart3-eb",	"ext-26m", 0x0,
+				0x1000, BIT(16), 0, 0);
+static SPRD_SC_GATE_CLK_FW_NAME(uart4_eb,	"uart4-eb",	"ext-26m", 0x0,
+				0x1000, BIT(17), 0, 0);
+static SPRD_SC_GATE_CLK_FW_NAME(sim0_32k_eb,	"sim0_32k-eb",	"ext-26m", 0x0,
+				0x1000, BIT(18), 0, 0);
+static SPRD_SC_GATE_CLK_FW_NAME(spi3_eb,	"spi3-eb",	"ext-26m", 0x0,
+				0x1000, BIT(19), 0, 0);
+static SPRD_SC_GATE_CLK_FW_NAME(i2c5_eb,	"i2c5-eb",	"ext-26m", 0x0,
+				0x1000, BIT(20), 0, 0);
+static SPRD_SC_GATE_CLK_FW_NAME(i2c6_eb,	"i2c6-eb",	"ext-26m", 0x0,
+				0x1000, BIT(21), 0, 0);
+
+static struct sprd_clk_common *sc9863a_apapb_gate[] = {
+	/* address base is 0x71300000 */
+	&sim0_eb.common,
+	&iis0_eb.common,
+	&iis1_eb.common,
+	&iis2_eb.common,
+	&spi0_eb.common,
+	&spi1_eb.common,
+	&spi2_eb.common,
+	&i2c0_eb.common,
+	&i2c1_eb.common,
+	&i2c2_eb.common,
+	&i2c3_eb.common,
+	&i2c4_eb.common,
+	&uart0_eb.common,
+	&uart1_eb.common,
+	&uart2_eb.common,
+	&uart3_eb.common,
+	&uart4_eb.common,
+	&sim0_32k_eb.common,
+	&spi3_eb.common,
+	&i2c5_eb.common,
+	&i2c6_eb.common,
+};
+
+static struct clk_hw_onecell_data sc9863a_apapb_gate_hws = {
+	.hws	= {
+		[CLK_SIM0_EB]		= &sim0_eb.common.hw,
+		[CLK_IIS0_EB]		= &iis0_eb.common.hw,
+		[CLK_IIS1_EB]		= &iis1_eb.common.hw,
+		[CLK_IIS2_EB]		= &iis2_eb.common.hw,
+		[CLK_SPI0_EB]		= &spi0_eb.common.hw,
+		[CLK_SPI1_EB]		= &spi1_eb.common.hw,
+		[CLK_SPI2_EB]		= &spi2_eb.common.hw,
+		[CLK_I2C0_EB]		= &i2c0_eb.common.hw,
+		[CLK_I2C1_EB]		= &i2c1_eb.common.hw,
+		[CLK_I2C2_EB]		= &i2c2_eb.common.hw,
+		[CLK_I2C3_EB]		= &i2c3_eb.common.hw,
+		[CLK_I2C4_EB]		= &i2c4_eb.common.hw,
+		[CLK_UART0_EB]		= &uart0_eb.common.hw,
+		[CLK_UART1_EB]		= &uart1_eb.common.hw,
+		[CLK_UART2_EB]		= &uart2_eb.common.hw,
+		[CLK_UART3_EB]		= &uart3_eb.common.hw,
+		[CLK_UART4_EB]		= &uart4_eb.common.hw,
+		[CLK_SIM0_32K_EB]	= &sim0_32k_eb.common.hw,
+		[CLK_SPI3_EB]		= &spi3_eb.common.hw,
+		[CLK_I2C5_EB]		= &i2c5_eb.common.hw,
+		[CLK_I2C6_EB]		= &i2c6_eb.common.hw,
+	},
+	.num	= CLK_AP_APB_GATE_NUM,
+};
+
+static const struct sprd_clk_desc sc9863a_apapb_gate_desc = {
+	.clk_clks	= sc9863a_apapb_gate,
+	.num_clk_clks	= ARRAY_SIZE(sc9863a_apapb_gate),
+	.hw_clks	= &sc9863a_apapb_gate_hws,
+};
+
+static const struct of_device_id sprd_sc9863a_clk_ids[] = {
+	{ .compatible = "sprd,sc9863a-ap-clk",	/* 0x21500000 */
+	  .data = &sc9863a_ap_clk_desc },
+	{ .compatible = "sprd,sc9863a-pmu-gate",	/* 0x402b0000 */
+	  .data = &sc9863a_pmu_gate_desc },
+	{ .compatible = "sprd,sc9863a-pll",	/* 0x40353000 */
+	  .data = &sc9863a_pll_desc },
+	{ .compatible = "sprd,sc9863a-mpll",	/* 0x40359000 */
+	  .data = &sc9863a_mpll_desc },
+	{ .compatible = "sprd,sc9863a-rpll",	/* 0x4035c000 */
+	  .data = &sc9863a_rpll_desc },
+	{ .compatible = "sprd,sc9863a-dpll",	/* 0x40363000 */
+	  .data = &sc9863a_dpll_desc },
+	{ .compatible = "sprd,sc9863a-aon-clk",	/* 0x402d0000 */
+	  .data = &sc9863a_aon_clk_desc },
+	{ .compatible = "sprd,sc9863a-apahb-gate",	/* 0x20e00000 */
+	  .data = &sc9863a_apahb_gate_desc },
+	{ .compatible = "sprd,sc9863a-aonapb-gate",	/* 0x402e0000 */
+	  .data = &sc9863a_aonapb_gate_desc },
+	{ .compatible = "sprd,sc9863a-mm-gate",	/* 0x60800000 */
+	  .data = &sc9863a_mm_gate_desc },
+	{ .compatible = "sprd,sc9863a-apapb-gate",	/* 0x71300000 */
+	  .data = &sc9863a_apapb_gate_desc },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sprd_sc9863a_clk_ids);
+
+static int sc9863a_clk_probe(struct platform_device *pdev)
+{
+	const struct sprd_clk_desc *desc;
+	int ret;
+
+	desc = device_get_match_data(&pdev->dev);
+	if (!desc)
+		return -ENODEV;
+
+	ret = sprd_clk_regmap_init(pdev, desc);
+	if (ret)
+		return ret;
+
+	return sprd_clk_probe(&pdev->dev, desc->hw_clks);
+}
+
+static struct platform_driver sc9863a_clk_driver = {
+	.probe	= sc9863a_clk_probe,
+	.driver	= {
+		.name	= "sc9863a-clk",
+		.of_match_table	= sprd_sc9863a_clk_ids,
+	},
+};
+module_platform_driver(sc9863a_clk_driver);
+
+MODULE_DESCRIPTION("Spreadtrum SC9863A Clock Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a64.h b/drivers/clk/sunxi-ng/ccu-sun50i-a64.h
index 116e6f8..54d1f96 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-a64.h
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.h
@@ -55,10 +55,6 @@
 
 /* All the DRAM gates are exported */
 
-/* Some more module clocks are exported */
-
-#define CLK_MBUS			112
-
 /* And the DSI and GPU module clock is exported */
 
 #define CLK_NUMBER			(CLK_GPU + 1)
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-de2.c b/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
index d966849..524f332 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
@@ -50,24 +50,8 @@ static SUNXI_CCU_M(mixer1_div_a83_clk, "mixer1-div", "pll-de", 0x0c, 4, 4,
 		   CLK_SET_RATE_PARENT);
 static SUNXI_CCU_M(wb_div_a83_clk, "wb-div", "pll-de", 0x0c, 8, 4,
 		   CLK_SET_RATE_PARENT);
-
-static struct ccu_common *sun50i_h6_de3_clks[] = {
-	&mixer0_clk.common,
-	&mixer1_clk.common,
-	&wb_clk.common,
-
-	&bus_mixer0_clk.common,
-	&bus_mixer1_clk.common,
-	&bus_wb_clk.common,
-
-	&mixer0_div_clk.common,
-	&mixer1_div_clk.common,
-	&wb_div_clk.common,
-
-	&bus_rot_clk.common,
-	&rot_clk.common,
-	&rot_div_clk.common,
-};
+static SUNXI_CCU_M(rot_div_a83_clk, "rot-div", "pll-de", 0x0c, 0x0c, 4,
+		   CLK_SET_RATE_PARENT);
 
 static struct ccu_common *sun8i_a83t_de2_clks[] = {
 	&mixer0_clk.common,
@@ -81,6 +65,10 @@ static struct ccu_common *sun8i_a83t_de2_clks[] = {
 	&mixer0_div_a83_clk.common,
 	&mixer1_div_a83_clk.common,
 	&wb_div_a83_clk.common,
+
+	&bus_rot_clk.common,
+	&rot_clk.common,
+	&rot_div_a83_clk.common,
 };
 
 static struct ccu_common *sun8i_h3_de2_clks[] = {
@@ -108,21 +96,42 @@ static struct ccu_common *sun8i_v3s_de2_clks[] = {
 	&wb_div_clk.common,
 };
 
+static struct ccu_common *sun50i_a64_de2_clks[] = {
+	&mixer0_clk.common,
+	&mixer1_clk.common,
+	&wb_clk.common,
+
+	&bus_mixer0_clk.common,
+	&bus_mixer1_clk.common,
+	&bus_wb_clk.common,
+
+	&mixer0_div_clk.common,
+	&mixer1_div_clk.common,
+	&wb_div_clk.common,
+
+	&bus_rot_clk.common,
+	&rot_clk.common,
+	&rot_div_clk.common,
+};
+
 static struct clk_hw_onecell_data sun8i_a83t_de2_hw_clks = {
 	.hws	= {
 		[CLK_MIXER0]		= &mixer0_clk.common.hw,
 		[CLK_MIXER1]		= &mixer1_clk.common.hw,
 		[CLK_WB]		= &wb_clk.common.hw,
+		[CLK_ROT]		= &rot_clk.common.hw,
 
 		[CLK_BUS_MIXER0]	= &bus_mixer0_clk.common.hw,
 		[CLK_BUS_MIXER1]	= &bus_mixer1_clk.common.hw,
 		[CLK_BUS_WB]		= &bus_wb_clk.common.hw,
+		[CLK_BUS_ROT]		= &bus_rot_clk.common.hw,
 
 		[CLK_MIXER0_DIV]	= &mixer0_div_a83_clk.common.hw,
 		[CLK_MIXER1_DIV]	= &mixer1_div_a83_clk.common.hw,
 		[CLK_WB_DIV]		= &wb_div_a83_clk.common.hw,
+		[CLK_ROT_DIV]		= &rot_div_a83_clk.common.hw,
 	},
-	.num	= CLK_NUMBER_WITHOUT_ROT,
+	.num	= CLK_NUMBER_WITH_ROT,
 };
 
 static struct clk_hw_onecell_data sun8i_h3_de2_hw_clks = {
@@ -156,7 +165,7 @@ static struct clk_hw_onecell_data sun8i_v3s_de2_hw_clks = {
 	.num	= CLK_NUMBER_WITHOUT_ROT,
 };
 
-static struct clk_hw_onecell_data sun50i_h6_de3_hw_clks = {
+static struct clk_hw_onecell_data sun50i_a64_de2_hw_clks = {
 	.hws	= {
 		[CLK_MIXER0]		= &mixer0_clk.common.hw,
 		[CLK_MIXER1]		= &mixer1_clk.common.hw,
@@ -179,9 +188,19 @@ static struct clk_hw_onecell_data sun50i_h6_de3_hw_clks = {
 static struct ccu_reset_map sun8i_a83t_de2_resets[] = {
 	[RST_MIXER0]	= { 0x08, BIT(0) },
 	/*
-	 * For A83T, H3 and R40, mixer1 reset line is shared with wb, so
-	 * only RST_WB is exported here.
-	 * For V3s there's just no mixer1, so it also shares this struct.
+	 * Mixer1 reset line is shared with wb, so only RST_WB is
+	 * exported here.
+	 */
+	[RST_WB]	= { 0x08, BIT(2) },
+	[RST_ROT]	= { 0x08, BIT(3) },
+};
+
+static struct ccu_reset_map sun8i_h3_de2_resets[] = {
+	[RST_MIXER0]	= { 0x08, BIT(0) },
+	/*
+	 * Mixer1 reset line is shared with wb, so only RST_WB is
+	 * exported here.
+	 * V3s doesn't have mixer1, so it also shares this struct.
 	 */
 	[RST_WB]	= { 0x08, BIT(2) },
 };
@@ -190,13 +209,13 @@ static struct ccu_reset_map sun50i_a64_de2_resets[] = {
 	[RST_MIXER0]	= { 0x08, BIT(0) },
 	[RST_MIXER1]	= { 0x08, BIT(1) },
 	[RST_WB]	= { 0x08, BIT(2) },
+	[RST_ROT]	= { 0x08, BIT(3) },
 };
 
-static struct ccu_reset_map sun50i_h6_de3_resets[] = {
+static struct ccu_reset_map sun50i_h5_de2_resets[] = {
 	[RST_MIXER0]	= { 0x08, BIT(0) },
 	[RST_MIXER1]	= { 0x08, BIT(1) },
 	[RST_WB]	= { 0x08, BIT(2) },
-	[RST_ROT]	= { 0x08, BIT(3) },
 };
 
 static const struct sunxi_ccu_desc sun8i_a83t_de2_clk_desc = {
@@ -215,30 +234,20 @@ static const struct sunxi_ccu_desc sun8i_h3_de2_clk_desc = {
 
 	.hw_clks	= &sun8i_h3_de2_hw_clks,
 
+	.resets		= sun8i_h3_de2_resets,
+	.num_resets	= ARRAY_SIZE(sun8i_h3_de2_resets),
+};
+
+static const struct sunxi_ccu_desc sun8i_r40_de2_clk_desc = {
+	.ccu_clks	= sun50i_a64_de2_clks,
+	.num_ccu_clks	= ARRAY_SIZE(sun50i_a64_de2_clks),
+
+	.hw_clks	= &sun50i_a64_de2_hw_clks,
+
 	.resets		= sun8i_a83t_de2_resets,
 	.num_resets	= ARRAY_SIZE(sun8i_a83t_de2_resets),
 };
 
-static const struct sunxi_ccu_desc sun50i_a64_de2_clk_desc = {
-	.ccu_clks	= sun8i_h3_de2_clks,
-	.num_ccu_clks	= ARRAY_SIZE(sun8i_h3_de2_clks),
-
-	.hw_clks	= &sun8i_h3_de2_hw_clks,
-
-	.resets		= sun50i_a64_de2_resets,
-	.num_resets	= ARRAY_SIZE(sun50i_a64_de2_resets),
-};
-
-static const struct sunxi_ccu_desc sun50i_h6_de3_clk_desc = {
-	.ccu_clks	= sun50i_h6_de3_clks,
-	.num_ccu_clks	= ARRAY_SIZE(sun50i_h6_de3_clks),
-
-	.hw_clks	= &sun50i_h6_de3_hw_clks,
-
-	.resets		= sun50i_h6_de3_resets,
-	.num_resets	= ARRAY_SIZE(sun50i_h6_de3_resets),
-};
-
 static const struct sunxi_ccu_desc sun8i_v3s_de2_clk_desc = {
 	.ccu_clks	= sun8i_v3s_de2_clks,
 	.num_ccu_clks	= ARRAY_SIZE(sun8i_v3s_de2_clks),
@@ -249,6 +258,26 @@ static const struct sunxi_ccu_desc sun8i_v3s_de2_clk_desc = {
 	.num_resets	= ARRAY_SIZE(sun8i_a83t_de2_resets),
 };
 
+static const struct sunxi_ccu_desc sun50i_a64_de2_clk_desc = {
+	.ccu_clks	= sun50i_a64_de2_clks,
+	.num_ccu_clks	= ARRAY_SIZE(sun50i_a64_de2_clks),
+
+	.hw_clks	= &sun50i_a64_de2_hw_clks,
+
+	.resets		= sun50i_a64_de2_resets,
+	.num_resets	= ARRAY_SIZE(sun50i_a64_de2_resets),
+};
+
+static const struct sunxi_ccu_desc sun50i_h5_de2_clk_desc = {
+	.ccu_clks	= sun8i_h3_de2_clks,
+	.num_ccu_clks	= ARRAY_SIZE(sun8i_h3_de2_clks),
+
+	.hw_clks	= &sun8i_h3_de2_hw_clks,
+
+	.resets		= sun50i_h5_de2_resets,
+	.num_resets	= ARRAY_SIZE(sun50i_h5_de2_resets),
+};
+
 static int sunxi_de2_clk_probe(struct platform_device *pdev)
 {
 	struct resource *res;
@@ -338,6 +367,10 @@ static const struct of_device_id sunxi_de2_clk_ids[] = {
 		.data = &sun8i_h3_de2_clk_desc,
 	},
 	{
+		.compatible = "allwinner,sun8i-r40-de2-clk",
+		.data = &sun8i_r40_de2_clk_desc,
+	},
+	{
 		.compatible = "allwinner,sun8i-v3s-de2-clk",
 		.data = &sun8i_v3s_de2_clk_desc,
 	},
@@ -347,11 +380,11 @@ static const struct of_device_id sunxi_de2_clk_ids[] = {
 	},
 	{
 		.compatible = "allwinner,sun50i-h5-de2-clk",
-		.data = &sun50i_a64_de2_clk_desc,
+		.data = &sun50i_h5_de2_clk_desc,
 	},
 	{
 		.compatible = "allwinner,sun50i-h6-de3-clk",
-		.data = &sun50i_h6_de3_clk_desc,
+		.data = &sun50i_h5_de2_clk_desc,
 	},
 	{ }
 };
diff --git a/drivers/clk/tegra/Makefile b/drivers/clk/tegra/Makefile
index df966ca..1f7c30f 100644
--- a/drivers/clk/tegra/Makefile
+++ b/drivers/clk/tegra/Makefile
@@ -12,7 +12,6 @@
 obj-y					+= clk-super.o
 obj-y					+= clk-tegra-audio.o
 obj-y					+= clk-tegra-periph.o
-obj-y					+= clk-tegra-pmc.o
 obj-y					+= clk-tegra-fixed.o
 obj-y					+= clk-tegra-super-gen4.o
 obj-$(CONFIG_TEGRA_CLK_EMC)		+= clk-emc.o
diff --git a/drivers/clk/tegra/clk-id.h b/drivers/clk/tegra/clk-id.h
index c4faebd..ff7da2d 100644
--- a/drivers/clk/tegra/clk-id.h
+++ b/drivers/clk/tegra/clk-id.h
@@ -32,7 +32,6 @@ enum clk_id {
 	tegra_clk_audio4,
 	tegra_clk_audio4_2x,
 	tegra_clk_audio4_mux,
-	tegra_clk_blink,
 	tegra_clk_bsea,
 	tegra_clk_bsev,
 	tegra_clk_cclk_g,
@@ -44,14 +43,9 @@ enum clk_id {
 	tegra_clk_clk72Mhz,
 	tegra_clk_clk72Mhz_8,
 	tegra_clk_clk_m,
-	tegra_clk_clk_m_div2,
-	tegra_clk_clk_m_div4,
-	tegra_clk_clk_out_1,
-	tegra_clk_clk_out_1_mux,
-	tegra_clk_clk_out_2,
-	tegra_clk_clk_out_2_mux,
-	tegra_clk_clk_out_3,
-	tegra_clk_clk_out_3_mux,
+	tegra_clk_osc,
+	tegra_clk_osc_div2,
+	tegra_clk_osc_div4,
 	tegra_clk_cml0,
 	tegra_clk_cml1,
 	tegra_clk_csi,
diff --git a/drivers/clk/tegra/clk-tegra-fixed.c b/drivers/clk/tegra/clk-tegra-fixed.c
index 7c6c8ab..77c22ce 100644
--- a/drivers/clk/tegra/clk-tegra-fixed.c
+++ b/drivers/clk/tegra/clk-tegra-fixed.c
@@ -46,7 +46,28 @@ int __init tegra_osc_clk_init(void __iomem *clk_base, struct tegra_clk *clks,
 		return -EINVAL;
 	}
 
+	dt_clk = tegra_lookup_dt_id(tegra_clk_osc, clks);
+	if (!dt_clk)
+		return 0;
+
 	osc = clk_register_fixed_rate(NULL, "osc", NULL, 0, *osc_freq);
+	*dt_clk = osc;
+
+	/* osc_div2 */
+	dt_clk = tegra_lookup_dt_id(tegra_clk_osc_div2, clks);
+	if (dt_clk) {
+		clk = clk_register_fixed_factor(NULL, "osc_div2", "osc",
+						0, 1, 2);
+		*dt_clk = clk;
+	}
+
+	/* osc_div4 */
+	dt_clk = tegra_lookup_dt_id(tegra_clk_osc_div4, clks);
+	if (dt_clk) {
+		clk = clk_register_fixed_factor(NULL, "osc_div4", "osc",
+						0, 1, 4);
+		*dt_clk = clk;
+	}
 
 	dt_clk = tegra_lookup_dt_id(tegra_clk_clk_m, clks);
 	if (!dt_clk)
@@ -84,22 +105,6 @@ void __init tegra_fixed_clk_init(struct tegra_clk *tegra_clks)
 		clk = clk_register_fixed_rate(NULL, "clk_32k", NULL, 0, 32768);
 		*dt_clk = clk;
 	}
-
-	/* clk_m_div2 */
-	dt_clk = tegra_lookup_dt_id(tegra_clk_clk_m_div2, tegra_clks);
-	if (dt_clk) {
-		clk = clk_register_fixed_factor(NULL, "clk_m_div2", "clk_m",
-					CLK_SET_RATE_PARENT, 1, 2);
-		*dt_clk = clk;
-	}
-
-	/* clk_m_div4 */
-	dt_clk = tegra_lookup_dt_id(tegra_clk_clk_m_div4, tegra_clks);
-	if (dt_clk) {
-		clk = clk_register_fixed_factor(NULL, "clk_m_div4", "clk_m",
-					CLK_SET_RATE_PARENT, 1, 4);
-		*dt_clk = clk;
-	}
 }
 
 void tegra_clk_osc_resume(void __iomem *clk_base)
diff --git a/drivers/clk/tegra/clk-tegra-pmc.c b/drivers/clk/tegra/clk-tegra-pmc.c
deleted file mode 100644
index bec3e00..0000000
--- a/drivers/clk/tegra/clk-tegra-pmc.c
+++ /dev/null
@@ -1,122 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2012, 2013, NVIDIA CORPORATION.  All rights reserved.
- */
-
-#include <linux/io.h>
-#include <linux/clk-provider.h>
-#include <linux/clkdev.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/delay.h>
-#include <linux/export.h>
-#include <linux/clk/tegra.h>
-
-#include "clk.h"
-#include "clk-id.h"
-
-#define PMC_CLK_OUT_CNTRL 0x1a8
-#define PMC_DPD_PADS_ORIDE 0x1c
-#define PMC_DPD_PADS_ORIDE_BLINK_ENB 20
-#define PMC_CTRL 0
-#define PMC_CTRL_BLINK_ENB 7
-#define PMC_BLINK_TIMER 0x40
-
-struct pmc_clk_init_data {
-	char *mux_name;
-	char *gate_name;
-	const char **parents;
-	int num_parents;
-	int mux_id;
-	int gate_id;
-	char *dev_name;
-	u8 mux_shift;
-	u8 gate_shift;
-};
-
-#define PMC_CLK(_num, _mux_shift, _gate_shift)\
-	{\
-		.mux_name = "clk_out_" #_num "_mux",\
-		.gate_name = "clk_out_" #_num,\
-		.parents = clk_out ##_num ##_parents,\
-		.num_parents = ARRAY_SIZE(clk_out ##_num ##_parents),\
-		.mux_id = tegra_clk_clk_out_ ##_num ##_mux,\
-		.gate_id = tegra_clk_clk_out_ ##_num,\
-		.dev_name = "extern" #_num,\
-		.mux_shift = _mux_shift,\
-		.gate_shift = _gate_shift,\
-	}
-
-static DEFINE_SPINLOCK(clk_out_lock);
-
-static const char *clk_out1_parents[] = { "clk_m", "clk_m_div2",
-	"clk_m_div4", "extern1",
-};
-
-static const char *clk_out2_parents[] = { "clk_m", "clk_m_div2",
-	"clk_m_div4", "extern2",
-};
-
-static const char *clk_out3_parents[] = { "clk_m", "clk_m_div2",
-	"clk_m_div4", "extern3",
-};
-
-static struct pmc_clk_init_data pmc_clks[] = {
-	PMC_CLK(1, 6, 2),
-	PMC_CLK(2, 14, 10),
-	PMC_CLK(3, 22, 18),
-};
-
-void __init tegra_pmc_clk_init(void __iomem *pmc_base,
-				struct tegra_clk *tegra_clks)
-{
-	struct clk *clk;
-	struct clk **dt_clk;
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(pmc_clks); i++) {
-		struct pmc_clk_init_data *data;
-
-		data = pmc_clks + i;
-
-		dt_clk = tegra_lookup_dt_id(data->mux_id, tegra_clks);
-		if (!dt_clk)
-			continue;
-
-		clk = clk_register_mux(NULL, data->mux_name, data->parents,
-				data->num_parents,
-				CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
-				pmc_base + PMC_CLK_OUT_CNTRL, data->mux_shift,
-				3, 0, &clk_out_lock);
-		*dt_clk = clk;
-
-
-		dt_clk = tegra_lookup_dt_id(data->gate_id, tegra_clks);
-		if (!dt_clk)
-			continue;
-
-		clk = clk_register_gate(NULL, data->gate_name, data->mux_name,
-					CLK_SET_RATE_PARENT,
-					pmc_base + PMC_CLK_OUT_CNTRL,
-					data->gate_shift, 0, &clk_out_lock);
-		*dt_clk = clk;
-		clk_register_clkdev(clk, data->dev_name, data->gate_name);
-	}
-
-	/* blink */
-	writel_relaxed(0, pmc_base + PMC_BLINK_TIMER);
-	clk = clk_register_gate(NULL, "blink_override", "clk_32k", 0,
-				pmc_base + PMC_DPD_PADS_ORIDE,
-				PMC_DPD_PADS_ORIDE_BLINK_ENB, 0, NULL);
-
-	dt_clk = tegra_lookup_dt_id(tegra_clk_blink, tegra_clks);
-	if (!dt_clk)
-		return;
-
-	clk = clk_register_gate(NULL, "blink", "blink_override", 0,
-				pmc_base + PMC_CTRL,
-				PMC_CTRL_BLINK_ENB, 0, NULL);
-	clk_register_clkdev(clk, "blink", NULL);
-	*dt_clk = clk;
-}
-
diff --git a/drivers/clk/tegra/clk-tegra114.c b/drivers/clk/tegra/clk-tegra114.c
index 4efcaaf..bc9e47a 100644
--- a/drivers/clk/tegra/clk-tegra114.c
+++ b/drivers/clk/tegra/clk-tegra114.c
@@ -735,8 +735,9 @@ static struct tegra_clk tegra114_clks[tegra_clk_max] __initdata = {
 	[tegra_clk_fuse_burn] = { .dt_id = TEGRA114_CLK_FUSE_BURN, .present = true },
 	[tegra_clk_clk_32k] = { .dt_id = TEGRA114_CLK_CLK_32K, .present = true },
 	[tegra_clk_clk_m] = { .dt_id = TEGRA114_CLK_CLK_M, .present = true },
-	[tegra_clk_clk_m_div2] = { .dt_id = TEGRA114_CLK_CLK_M_DIV2, .present = true },
-	[tegra_clk_clk_m_div4] = { .dt_id = TEGRA114_CLK_CLK_M_DIV4, .present = true },
+	[tegra_clk_osc] = { .dt_id = TEGRA114_CLK_OSC, .present = true },
+	[tegra_clk_osc_div2] = { .dt_id = TEGRA114_CLK_OSC_DIV2, .present = true },
+	[tegra_clk_osc_div4] = { .dt_id = TEGRA114_CLK_OSC_DIV4, .present = true },
 	[tegra_clk_pll_ref] = { .dt_id = TEGRA114_CLK_PLL_REF, .present = true },
 	[tegra_clk_pll_c] = { .dt_id = TEGRA114_CLK_PLL_C, .present = true },
 	[tegra_clk_pll_c_out1] = { .dt_id = TEGRA114_CLK_PLL_C_OUT1, .present = true },
@@ -778,10 +779,6 @@ static struct tegra_clk tegra114_clks[tegra_clk_max] __initdata = {
 	[tegra_clk_audio3] = { .dt_id = TEGRA114_CLK_AUDIO3, .present = true },
 	[tegra_clk_audio4] = { .dt_id = TEGRA114_CLK_AUDIO4, .present = true },
 	[tegra_clk_spdif] = { .dt_id = TEGRA114_CLK_SPDIF, .present = true },
-	[tegra_clk_clk_out_1] = { .dt_id = TEGRA114_CLK_CLK_OUT_1, .present = true },
-	[tegra_clk_clk_out_2] = { .dt_id = TEGRA114_CLK_CLK_OUT_2, .present = true },
-	[tegra_clk_clk_out_3] = { .dt_id = TEGRA114_CLK_CLK_OUT_3, .present = true },
-	[tegra_clk_blink] = { .dt_id = TEGRA114_CLK_BLINK, .present = true },
 	[tegra_clk_xusb_host_src] = { .dt_id = TEGRA114_CLK_XUSB_HOST_SRC, .present = true },
 	[tegra_clk_xusb_falcon_src] = { .dt_id = TEGRA114_CLK_XUSB_FALCON_SRC, .present = true },
 	[tegra_clk_xusb_fs_src] = { .dt_id = TEGRA114_CLK_XUSB_FS_SRC, .present = true },
@@ -803,9 +800,6 @@ static struct tegra_clk tegra114_clks[tegra_clk_max] __initdata = {
 	[tegra_clk_audio3_mux] = { .dt_id = TEGRA114_CLK_AUDIO3_MUX, .present = true },
 	[tegra_clk_audio4_mux] = { .dt_id = TEGRA114_CLK_AUDIO4_MUX, .present = true },
 	[tegra_clk_spdif_mux] = { .dt_id = TEGRA114_CLK_SPDIF_MUX, .present = true },
-	[tegra_clk_clk_out_1_mux] = { .dt_id = TEGRA114_CLK_CLK_OUT_1_MUX, .present = true },
-	[tegra_clk_clk_out_2_mux] = { .dt_id = TEGRA114_CLK_CLK_OUT_2_MUX, .present = true },
-	[tegra_clk_clk_out_3_mux] = { .dt_id = TEGRA114_CLK_CLK_OUT_3_MUX, .present = true },
 	[tegra_clk_dsia_mux] = { .dt_id = TEGRA114_CLK_DSIA_MUX, .present = true },
 	[tegra_clk_dsib_mux] = { .dt_id = TEGRA114_CLK_DSIB_MUX, .present = true },
 	[tegra_clk_cec] = { .dt_id = TEGRA114_CLK_CEC, .present = true },
@@ -815,8 +809,9 @@ static struct tegra_devclk devclks[] __initdata = {
 	{ .con_id = "clk_m", .dt_id = TEGRA114_CLK_CLK_M },
 	{ .con_id = "pll_ref", .dt_id = TEGRA114_CLK_PLL_REF },
 	{ .con_id = "clk_32k", .dt_id = TEGRA114_CLK_CLK_32K },
-	{ .con_id = "clk_m_div2", .dt_id = TEGRA114_CLK_CLK_M_DIV2 },
-	{ .con_id = "clk_m_div4", .dt_id = TEGRA114_CLK_CLK_M_DIV4 },
+	{ .con_id = "osc", .dt_id = TEGRA114_CLK_OSC },
+	{ .con_id = "osc_div2", .dt_id = TEGRA114_CLK_OSC_DIV2 },
+	{ .con_id = "osc_div4", .dt_id = TEGRA114_CLK_OSC_DIV4 },
 	{ .con_id = "pll_c", .dt_id = TEGRA114_CLK_PLL_C },
 	{ .con_id = "pll_c_out1", .dt_id = TEGRA114_CLK_PLL_C_OUT1 },
 	{ .con_id = "pll_c2", .dt_id = TEGRA114_CLK_PLL_C2 },
@@ -863,10 +858,9 @@ static struct tegra_devclk devclks[] __initdata = {
 	{ .con_id = "audio3_2x", .dt_id = TEGRA114_CLK_AUDIO3_2X },
 	{ .con_id = "audio4_2x", .dt_id = TEGRA114_CLK_AUDIO4_2X },
 	{ .con_id = "spdif_2x", .dt_id = TEGRA114_CLK_SPDIF_2X },
-	{ .con_id = "extern1", .dev_id = "clk_out_1", .dt_id = TEGRA114_CLK_EXTERN1 },
-	{ .con_id = "extern2", .dev_id = "clk_out_2", .dt_id = TEGRA114_CLK_EXTERN2 },
-	{ .con_id = "extern3", .dev_id = "clk_out_3", .dt_id = TEGRA114_CLK_EXTERN3 },
-	{ .con_id = "blink", .dt_id = TEGRA114_CLK_BLINK },
+	{ .con_id = "extern1", .dt_id = TEGRA114_CLK_EXTERN1 },
+	{ .con_id = "extern2", .dt_id = TEGRA114_CLK_EXTERN2 },
+	{ .con_id = "extern3", .dt_id = TEGRA114_CLK_EXTERN3 },
 	{ .con_id = "cclk_g", .dt_id = TEGRA114_CLK_CCLK_G },
 	{ .con_id = "cclk_lp", .dt_id = TEGRA114_CLK_CCLK_LP },
 	{ .con_id = "sclk", .dt_id = TEGRA114_CLK_SCLK },
@@ -900,17 +894,6 @@ static void __init tegra114_fixed_clk_init(void __iomem *clk_base)
 	/* clk_32k */
 	clk = clk_register_fixed_rate(NULL, "clk_32k", NULL, 0, 32768);
 	clks[TEGRA114_CLK_CLK_32K] = clk;
-
-	/* clk_m_div2 */
-	clk = clk_register_fixed_factor(NULL, "clk_m_div2", "clk_m",
-					CLK_SET_RATE_PARENT, 1, 2);
-	clks[TEGRA114_CLK_CLK_M_DIV2] = clk;
-
-	/* clk_m_div4 */
-	clk = clk_register_fixed_factor(NULL, "clk_m_div4", "clk_m",
-					CLK_SET_RATE_PARENT, 1, 4);
-	clks[TEGRA114_CLK_CLK_M_DIV4] = clk;
-
 }
 
 static void __init tegra114_pll_init(void __iomem *clk_base,
@@ -1153,11 +1136,8 @@ static struct tegra_clk_init_table init_table[] __initdata = {
 	{ TEGRA114_CLK_UARTB, TEGRA114_CLK_PLL_P, 408000000, 0 },
 	{ TEGRA114_CLK_UARTC, TEGRA114_CLK_PLL_P, 408000000, 0 },
 	{ TEGRA114_CLK_UARTD, TEGRA114_CLK_PLL_P, 408000000, 0 },
-	{ TEGRA114_CLK_PLL_A, TEGRA114_CLK_CLK_MAX, 564480000, 1 },
-	{ TEGRA114_CLK_PLL_A_OUT0, TEGRA114_CLK_CLK_MAX, 11289600, 1 },
-	{ TEGRA114_CLK_EXTERN1, TEGRA114_CLK_PLL_A_OUT0, 0, 1 },
-	{ TEGRA114_CLK_CLK_OUT_1_MUX, TEGRA114_CLK_EXTERN1, 0, 1 },
-	{ TEGRA114_CLK_CLK_OUT_1, TEGRA114_CLK_CLK_MAX, 0, 1 },
+	{ TEGRA114_CLK_PLL_A, TEGRA114_CLK_CLK_MAX, 564480000, 0 },
+	{ TEGRA114_CLK_PLL_A_OUT0, TEGRA114_CLK_CLK_MAX, 11289600, 0 },
 	{ TEGRA114_CLK_I2S0, TEGRA114_CLK_PLL_A_OUT0, 11289600, 0 },
 	{ TEGRA114_CLK_I2S1, TEGRA114_CLK_PLL_A_OUT0, 11289600, 0 },
 	{ TEGRA114_CLK_I2S2, TEGRA114_CLK_PLL_A_OUT0, 11289600, 0 },
@@ -1359,7 +1339,6 @@ static void __init tegra114_clock_init(struct device_node *np)
 	tegra_audio_clk_init(clk_base, pmc_base, tegra114_clks,
 			     tegra114_audio_plls,
 			     ARRAY_SIZE(tegra114_audio_plls), 24000000);
-	tegra_pmc_clk_init(pmc_base, tegra114_clks);
 	tegra_super_clk_gen4_init(clk_base, pmc_base, tegra114_clks,
 					&pll_x_params);
 
diff --git a/drivers/clk/tegra/clk-tegra124.c b/drivers/clk/tegra/clk-tegra124.c
index b3110d5..64e229d 100644
--- a/drivers/clk/tegra/clk-tegra124.c
+++ b/drivers/clk/tegra/clk-tegra124.c
@@ -860,8 +860,9 @@ static struct tegra_clk tegra124_clks[tegra_clk_max] __initdata = {
 	[tegra_clk_fuse_burn] = { .dt_id = TEGRA124_CLK_FUSE_BURN, .present = true },
 	[tegra_clk_clk_32k] = { .dt_id = TEGRA124_CLK_CLK_32K, .present = true },
 	[tegra_clk_clk_m] = { .dt_id = TEGRA124_CLK_CLK_M, .present = true },
-	[tegra_clk_clk_m_div2] = { .dt_id = TEGRA124_CLK_CLK_M_DIV2, .present = true },
-	[tegra_clk_clk_m_div4] = { .dt_id = TEGRA124_CLK_CLK_M_DIV4, .present = true },
+	[tegra_clk_osc] = { .dt_id = TEGRA124_CLK_OSC, .present = true },
+	[tegra_clk_osc_div2] = { .dt_id = TEGRA124_CLK_OSC_DIV2, .present = true },
+	[tegra_clk_osc_div4] = { .dt_id = TEGRA124_CLK_OSC_DIV4, .present = true },
 	[tegra_clk_pll_ref] = { .dt_id = TEGRA124_CLK_PLL_REF, .present = true },
 	[tegra_clk_pll_c] = { .dt_id = TEGRA124_CLK_PLL_C, .present = true },
 	[tegra_clk_pll_c_out1] = { .dt_id = TEGRA124_CLK_PLL_C_OUT1, .present = true },
@@ -902,10 +903,6 @@ static struct tegra_clk tegra124_clks[tegra_clk_max] __initdata = {
 	[tegra_clk_audio3] = { .dt_id = TEGRA124_CLK_AUDIO3, .present = true },
 	[tegra_clk_audio4] = { .dt_id = TEGRA124_CLK_AUDIO4, .present = true },
 	[tegra_clk_spdif] = { .dt_id = TEGRA124_CLK_SPDIF, .present = true },
-	[tegra_clk_clk_out_1] = { .dt_id = TEGRA124_CLK_CLK_OUT_1, .present = true },
-	[tegra_clk_clk_out_2] = { .dt_id = TEGRA124_CLK_CLK_OUT_2, .present = true },
-	[tegra_clk_clk_out_3] = { .dt_id = TEGRA124_CLK_CLK_OUT_3, .present = true },
-	[tegra_clk_blink] = { .dt_id = TEGRA124_CLK_BLINK, .present = true },
 	[tegra_clk_xusb_host_src] = { .dt_id = TEGRA124_CLK_XUSB_HOST_SRC, .present = true },
 	[tegra_clk_xusb_falcon_src] = { .dt_id = TEGRA124_CLK_XUSB_FALCON_SRC, .present = true },
 	[tegra_clk_xusb_fs_src] = { .dt_id = TEGRA124_CLK_XUSB_FS_SRC, .present = true },
@@ -931,9 +928,6 @@ static struct tegra_clk tegra124_clks[tegra_clk_max] __initdata = {
 	[tegra_clk_audio3_mux] = { .dt_id = TEGRA124_CLK_AUDIO3_MUX, .present = true },
 	[tegra_clk_audio4_mux] = { .dt_id = TEGRA124_CLK_AUDIO4_MUX, .present = true },
 	[tegra_clk_spdif_mux] = { .dt_id = TEGRA124_CLK_SPDIF_MUX, .present = true },
-	[tegra_clk_clk_out_1_mux] = { .dt_id = TEGRA124_CLK_CLK_OUT_1_MUX, .present = true },
-	[tegra_clk_clk_out_2_mux] = { .dt_id = TEGRA124_CLK_CLK_OUT_2_MUX, .present = true },
-	[tegra_clk_clk_out_3_mux] = { .dt_id = TEGRA124_CLK_CLK_OUT_3_MUX, .present = true },
 	[tegra_clk_cec] = { .dt_id = TEGRA124_CLK_CEC, .present = true },
 };
 
@@ -941,8 +935,9 @@ static struct tegra_devclk devclks[] __initdata = {
 	{ .con_id = "clk_m", .dt_id = TEGRA124_CLK_CLK_M },
 	{ .con_id = "pll_ref", .dt_id = TEGRA124_CLK_PLL_REF },
 	{ .con_id = "clk_32k", .dt_id = TEGRA124_CLK_CLK_32K },
-	{ .con_id = "clk_m_div2", .dt_id = TEGRA124_CLK_CLK_M_DIV2 },
-	{ .con_id = "clk_m_div4", .dt_id = TEGRA124_CLK_CLK_M_DIV4 },
+	{ .con_id = "osc", .dt_id = TEGRA124_CLK_OSC },
+	{ .con_id = "osc_div2", .dt_id = TEGRA124_CLK_OSC_DIV2 },
+	{ .con_id = "osc_div4", .dt_id = TEGRA124_CLK_OSC_DIV4 },
 	{ .con_id = "pll_c", .dt_id = TEGRA124_CLK_PLL_C },
 	{ .con_id = "pll_c_out1", .dt_id = TEGRA124_CLK_PLL_C_OUT1 },
 	{ .con_id = "pll_c2", .dt_id = TEGRA124_CLK_PLL_C2 },
@@ -988,10 +983,9 @@ static struct tegra_devclk devclks[] __initdata = {
 	{ .con_id = "audio3_2x", .dt_id = TEGRA124_CLK_AUDIO3_2X },
 	{ .con_id = "audio4_2x", .dt_id = TEGRA124_CLK_AUDIO4_2X },
 	{ .con_id = "spdif_2x", .dt_id = TEGRA124_CLK_SPDIF_2X },
-	{ .con_id = "extern1", .dev_id = "clk_out_1", .dt_id = TEGRA124_CLK_EXTERN1 },
-	{ .con_id = "extern2", .dev_id = "clk_out_2", .dt_id = TEGRA124_CLK_EXTERN2 },
-	{ .con_id = "extern3", .dev_id = "clk_out_3", .dt_id = TEGRA124_CLK_EXTERN3 },
-	{ .con_id = "blink", .dt_id = TEGRA124_CLK_BLINK },
+	{ .con_id = "extern1", .dt_id = TEGRA124_CLK_EXTERN1 },
+	{ .con_id = "extern2", .dt_id = TEGRA124_CLK_EXTERN2 },
+	{ .con_id = "extern3", .dt_id = TEGRA124_CLK_EXTERN3 },
 	{ .con_id = "cclk_g", .dt_id = TEGRA124_CLK_CCLK_G },
 	{ .con_id = "cclk_lp", .dt_id = TEGRA124_CLK_CCLK_LP },
 	{ .con_id = "sclk", .dt_id = TEGRA124_CLK_SCLK },
@@ -1298,11 +1292,8 @@ static struct tegra_clk_init_table common_init_table[] __initdata = {
 	{ TEGRA124_CLK_UARTB, TEGRA124_CLK_PLL_P, 408000000, 0 },
 	{ TEGRA124_CLK_UARTC, TEGRA124_CLK_PLL_P, 408000000, 0 },
 	{ TEGRA124_CLK_UARTD, TEGRA124_CLK_PLL_P, 408000000, 0 },
-	{ TEGRA124_CLK_PLL_A, TEGRA124_CLK_CLK_MAX, 564480000, 1 },
-	{ TEGRA124_CLK_PLL_A_OUT0, TEGRA124_CLK_CLK_MAX, 11289600, 1 },
-	{ TEGRA124_CLK_EXTERN1, TEGRA124_CLK_PLL_A_OUT0, 0, 1 },
-	{ TEGRA124_CLK_CLK_OUT_1_MUX, TEGRA124_CLK_EXTERN1, 0, 1 },
-	{ TEGRA124_CLK_CLK_OUT_1, TEGRA124_CLK_CLK_MAX, 0, 1 },
+	{ TEGRA124_CLK_PLL_A, TEGRA124_CLK_CLK_MAX, 564480000, 0 },
+	{ TEGRA124_CLK_PLL_A_OUT0, TEGRA124_CLK_CLK_MAX, 11289600, 0 },
 	{ TEGRA124_CLK_I2S0, TEGRA124_CLK_PLL_A_OUT0, 11289600, 0 },
 	{ TEGRA124_CLK_I2S1, TEGRA124_CLK_PLL_A_OUT0, 11289600, 0 },
 	{ TEGRA124_CLK_I2S2, TEGRA124_CLK_PLL_A_OUT0, 11289600, 0 },
@@ -1457,11 +1448,9 @@ static void __init tegra132_clock_apply_init_table(void)
  * tegra124_132_clock_init_pre - clock initialization preamble for T124/T132
  * @np: struct device_node * of the DT node for the SoC CAR IP block
  *
- * Register most of the clocks controlled by the CAR IP block, along
- * with a few clocks controlled by the PMC IP block.  Everything in
- * this function should be common to Tegra124 and Tegra132.  XXX The
- * PMC clock initialization should probably be moved to PMC-specific
- * driver code.  No return value.
+ * Register most of the clocks controlled by the CAR IP block.
+ * Everything in this function should be common to Tegra124 and Tegra132.
+ * No return value.
  */
 static void __init tegra124_132_clock_init_pre(struct device_node *np)
 {
@@ -1504,7 +1493,6 @@ static void __init tegra124_132_clock_init_pre(struct device_node *np)
 	tegra_audio_clk_init(clk_base, pmc_base, tegra124_clks,
 			     tegra124_audio_plls,
 			     ARRAY_SIZE(tegra124_audio_plls), 24576000);
-	tegra_pmc_clk_init(pmc_base, tegra124_clks);
 
 	/* For Tegra124 & Tegra132, PLLD is the only source for DSIA & DSIB */
 	plld_base = readl(clk_base + PLLD_BASE);
@@ -1516,11 +1504,11 @@ static void __init tegra124_132_clock_init_pre(struct device_node *np)
  * tegra124_132_clock_init_post - clock initialization postamble for T124/T132
  * @np: struct device_node * of the DT node for the SoC CAR IP block
  *
- * Register most of the along with a few clocks controlled by the PMC
- * IP block.  Everything in this function should be common to Tegra124
+ * Register most of the clocks controlled by the CAR IP block.
+ * Everything in this function should be common to Tegra124
  * and Tegra132.  This function must be called after
- * tegra124_132_clock_init_pre(), otherwise clk_base and pmc_base will
- * not be set.  No return value.
+ * tegra124_132_clock_init_pre(), otherwise clk_base will not be set.
+ * No return value.
  */
 static void __init tegra124_132_clock_init_post(struct device_node *np)
 {
diff --git a/drivers/clk/tegra/clk-tegra20.c b/drivers/clk/tegra/clk-tegra20.c
index fff5cba..085feb0 100644
--- a/drivers/clk/tegra/clk-tegra20.c
+++ b/drivers/clk/tegra/clk-tegra20.c
@@ -458,7 +458,6 @@ static struct tegra_devclk devclks[] __initdata = {
 	{ .con_id = "cdev1", .dt_id = TEGRA20_CLK_CDEV1 },
 	{ .con_id = "cdev2", .dt_id = TEGRA20_CLK_CDEV2 },
 	{ .con_id = "clk_32k", .dt_id = TEGRA20_CLK_CLK_32K },
-	{ .con_id = "blink", .dt_id = TEGRA20_CLK_BLINK },
 	{ .con_id = "clk_m", .dt_id = TEGRA20_CLK_CLK_M },
 	{ .con_id = "pll_ref", .dt_id = TEGRA20_CLK_PLL_REF },
 	{ .dev_id = "tegra20-i2s.0", .dt_id = TEGRA20_CLK_I2S1 },
@@ -537,7 +536,6 @@ static struct tegra_clk tegra20_clks[tegra_clk_max] __initdata = {
 	[tegra_clk_csi] = { .dt_id = TEGRA20_CLK_CSI, .present = true },
 	[tegra_clk_isp] = { .dt_id = TEGRA20_CLK_ISP, .present = true },
 	[tegra_clk_clk_32k] = { .dt_id = TEGRA20_CLK_CLK_32K, .present = true },
-	[tegra_clk_blink] = { .dt_id = TEGRA20_CLK_BLINK, .present = true },
 	[tegra_clk_hclk] = { .dt_id = TEGRA20_CLK_HCLK, .present = true },
 	[tegra_clk_pclk] = { .dt_id = TEGRA20_CLK_PCLK, .present = true },
 	[tegra_clk_pll_p_out1] = { .dt_id = TEGRA20_CLK_PLL_P_OUT1, .present = true },
@@ -1031,10 +1029,8 @@ static struct tegra_clk_init_table init_table[] __initdata = {
 	{ TEGRA20_CLK_UARTC, TEGRA20_CLK_PLL_P, 0, 0 },
 	{ TEGRA20_CLK_UARTD, TEGRA20_CLK_PLL_P, 0, 0 },
 	{ TEGRA20_CLK_UARTE, TEGRA20_CLK_PLL_P, 0, 0 },
-	{ TEGRA20_CLK_PLL_A, TEGRA20_CLK_CLK_MAX, 56448000, 1 },
-	{ TEGRA20_CLK_PLL_A_OUT0, TEGRA20_CLK_CLK_MAX, 11289600, 1 },
-	{ TEGRA20_CLK_CDEV1, TEGRA20_CLK_CLK_MAX, 0, 1 },
-	{ TEGRA20_CLK_BLINK, TEGRA20_CLK_CLK_MAX, 32768, 1 },
+	{ TEGRA20_CLK_PLL_A, TEGRA20_CLK_CLK_MAX, 56448000, 0 },
+	{ TEGRA20_CLK_PLL_A_OUT0, TEGRA20_CLK_CLK_MAX, 11289600, 0 },
 	{ TEGRA20_CLK_I2S1, TEGRA20_CLK_PLL_A_OUT0, 11289600, 0 },
 	{ TEGRA20_CLK_I2S2, TEGRA20_CLK_PLL_A_OUT0, 11289600, 0 },
 	{ TEGRA20_CLK_SDMMC1, TEGRA20_CLK_PLL_P, 48000000, 0 },
@@ -1146,7 +1142,6 @@ static void __init tegra20_clock_init(struct device_node *np)
 	tegra_super_clk_gen4_init(clk_base, pmc_base, tegra20_clks, NULL);
 	tegra20_periph_clk_init();
 	tegra20_audio_clk_init();
-	tegra_pmc_clk_init(pmc_base, tegra20_clks);
 
 	tegra_init_dup_clks(tegra_clk_duplicates, clks, TEGRA20_CLK_CLK_MAX);
 
diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
index 762cd18..defe3b7 100644
--- a/drivers/clk/tegra/clk-tegra210.c
+++ b/drivers/clk/tegra/clk-tegra210.c
@@ -2371,8 +2371,9 @@ static struct tegra_clk tegra210_clks[tegra_clk_max] __initdata = {
 	[tegra_clk_fuse_burn] = { .dt_id = TEGRA210_CLK_FUSE_BURN, .present = true },
 	[tegra_clk_clk_32k] = { .dt_id = TEGRA210_CLK_CLK_32K, .present = true },
 	[tegra_clk_clk_m] = { .dt_id = TEGRA210_CLK_CLK_M, .present = true },
-	[tegra_clk_clk_m_div2] = { .dt_id = TEGRA210_CLK_CLK_M_DIV2, .present = true },
-	[tegra_clk_clk_m_div4] = { .dt_id = TEGRA210_CLK_CLK_M_DIV4, .present = true },
+	[tegra_clk_osc] = { .dt_id = TEGRA210_CLK_OSC, .present = true },
+	[tegra_clk_osc_div2] = { .dt_id = TEGRA210_CLK_OSC_DIV2, .present = true },
+	[tegra_clk_osc_div4] = { .dt_id = TEGRA210_CLK_OSC_DIV4, .present = true },
 	[tegra_clk_pll_ref] = { .dt_id = TEGRA210_CLK_PLL_REF, .present = true },
 	[tegra_clk_pll_c] = { .dt_id = TEGRA210_CLK_PLL_C, .present = true },
 	[tegra_clk_pll_c_out1] = { .dt_id = TEGRA210_CLK_PLL_C_OUT1, .present = true },
@@ -2417,10 +2418,6 @@ static struct tegra_clk tegra210_clks[tegra_clk_max] __initdata = {
 	[tegra_clk_audio3] = { .dt_id = TEGRA210_CLK_AUDIO3, .present = true },
 	[tegra_clk_audio4] = { .dt_id = TEGRA210_CLK_AUDIO4, .present = true },
 	[tegra_clk_spdif] = { .dt_id = TEGRA210_CLK_SPDIF, .present = true },
-	[tegra_clk_clk_out_1] = { .dt_id = TEGRA210_CLK_CLK_OUT_1, .present = true },
-	[tegra_clk_clk_out_2] = { .dt_id = TEGRA210_CLK_CLK_OUT_2, .present = true },
-	[tegra_clk_clk_out_3] = { .dt_id = TEGRA210_CLK_CLK_OUT_3, .present = true },
-	[tegra_clk_blink] = { .dt_id = TEGRA210_CLK_BLINK, .present = true },
 	[tegra_clk_xusb_gate] = { .dt_id = TEGRA210_CLK_XUSB_GATE, .present = true },
 	[tegra_clk_xusb_host_src_8] = { .dt_id = TEGRA210_CLK_XUSB_HOST_SRC, .present = true },
 	[tegra_clk_xusb_falcon_src_8] = { .dt_id = TEGRA210_CLK_XUSB_FALCON_SRC, .present = true },
@@ -2452,9 +2449,6 @@ static struct tegra_clk tegra210_clks[tegra_clk_max] __initdata = {
 	[tegra_clk_audio3_mux] = { .dt_id = TEGRA210_CLK_AUDIO3_MUX, .present = true },
 	[tegra_clk_audio4_mux] = { .dt_id = TEGRA210_CLK_AUDIO4_MUX, .present = true },
 	[tegra_clk_spdif_mux] = { .dt_id = TEGRA210_CLK_SPDIF_MUX, .present = true },
-	[tegra_clk_clk_out_1_mux] = { .dt_id = TEGRA210_CLK_CLK_OUT_1_MUX, .present = true },
-	[tegra_clk_clk_out_2_mux] = { .dt_id = TEGRA210_CLK_CLK_OUT_2_MUX, .present = true },
-	[tegra_clk_clk_out_3_mux] = { .dt_id = TEGRA210_CLK_CLK_OUT_3_MUX, .present = true },
 	[tegra_clk_maud] = { .dt_id = TEGRA210_CLK_MAUD, .present = true },
 	[tegra_clk_mipibif] = { .dt_id = TEGRA210_CLK_MIPIBIF, .present = true },
 	[tegra_clk_qspi] = { .dt_id = TEGRA210_CLK_QSPI, .present = true },
@@ -2497,8 +2491,9 @@ static struct tegra_devclk devclks[] __initdata = {
 	{ .con_id = "clk_m", .dt_id = TEGRA210_CLK_CLK_M },
 	{ .con_id = "pll_ref", .dt_id = TEGRA210_CLK_PLL_REF },
 	{ .con_id = "clk_32k", .dt_id = TEGRA210_CLK_CLK_32K },
-	{ .con_id = "clk_m_div2", .dt_id = TEGRA210_CLK_CLK_M_DIV2 },
-	{ .con_id = "clk_m_div4", .dt_id = TEGRA210_CLK_CLK_M_DIV4 },
+	{ .con_id = "osc", .dt_id = TEGRA210_CLK_OSC },
+	{ .con_id = "osc_div2", .dt_id = TEGRA210_CLK_OSC_DIV2 },
+	{ .con_id = "osc_div4", .dt_id = TEGRA210_CLK_OSC_DIV4 },
 	{ .con_id = "pll_c", .dt_id = TEGRA210_CLK_PLL_C },
 	{ .con_id = "pll_c_out1", .dt_id = TEGRA210_CLK_PLL_C_OUT1 },
 	{ .con_id = "pll_c2", .dt_id = TEGRA210_CLK_PLL_C2 },
@@ -2540,10 +2535,9 @@ static struct tegra_devclk devclks[] __initdata = {
 	{ .con_id = "audio4", .dt_id = TEGRA210_CLK_AUDIO4 },
 	{ .con_id = "spdif", .dt_id = TEGRA210_CLK_SPDIF },
 	{ .con_id = "spdif_2x", .dt_id = TEGRA210_CLK_SPDIF_2X },
-	{ .con_id = "extern1", .dev_id = "clk_out_1", .dt_id = TEGRA210_CLK_EXTERN1 },
-	{ .con_id = "extern2", .dev_id = "clk_out_2", .dt_id = TEGRA210_CLK_EXTERN2 },
-	{ .con_id = "extern3", .dev_id = "clk_out_3", .dt_id = TEGRA210_CLK_EXTERN3 },
-	{ .con_id = "blink", .dt_id = TEGRA210_CLK_BLINK },
+	{ .con_id = "extern1", .dt_id = TEGRA210_CLK_EXTERN1 },
+	{ .con_id = "extern2", .dt_id = TEGRA210_CLK_EXTERN2 },
+	{ .con_id = "extern3", .dt_id = TEGRA210_CLK_EXTERN3 },
 	{ .con_id = "cclk_g", .dt_id = TEGRA210_CLK_CCLK_G },
 	{ .con_id = "cclk_lp", .dt_id = TEGRA210_CLK_CCLK_LP },
 	{ .con_id = "sclk", .dt_id = TEGRA210_CLK_SCLK },
@@ -2999,7 +2993,7 @@ static const char * const la_parents[] = {
 };
 
 static struct tegra_clk_periph tegra210_la =
-	TEGRA_CLK_PERIPH(29, 7, 9, 0, 8, 1, TEGRA_DIVIDER_ROUND_UP, 76, 0, NULL, 0);
+	TEGRA_CLK_PERIPH(29, 7, 9, 0, 8, 1, TEGRA_DIVIDER_ROUND_UP, 76, 0, NULL, NULL);
 
 static __init void tegra210_periph_clk_init(void __iomem *clk_base,
 					    void __iomem *pmc_base)
@@ -3448,11 +3442,8 @@ static struct tegra_clk_init_table init_table[] __initdata = {
 	{ TEGRA210_CLK_UARTB, TEGRA210_CLK_PLL_P, 408000000, 0 },
 	{ TEGRA210_CLK_UARTC, TEGRA210_CLK_PLL_P, 408000000, 0 },
 	{ TEGRA210_CLK_UARTD, TEGRA210_CLK_PLL_P, 408000000, 0 },
-	{ TEGRA210_CLK_PLL_A, TEGRA210_CLK_CLK_MAX, 564480000, 1 },
-	{ TEGRA210_CLK_PLL_A_OUT0, TEGRA210_CLK_CLK_MAX, 11289600, 1 },
-	{ TEGRA210_CLK_EXTERN1, TEGRA210_CLK_PLL_A_OUT0, 0, 1 },
-	{ TEGRA210_CLK_CLK_OUT_1_MUX, TEGRA210_CLK_EXTERN1, 0, 1 },
-	{ TEGRA210_CLK_CLK_OUT_1, TEGRA210_CLK_CLK_MAX, 0, 1 },
+	{ TEGRA210_CLK_PLL_A, TEGRA210_CLK_CLK_MAX, 564480000, 0 },
+	{ TEGRA210_CLK_PLL_A_OUT0, TEGRA210_CLK_CLK_MAX, 11289600, 0 },
 	{ TEGRA210_CLK_I2S0, TEGRA210_CLK_PLL_A_OUT0, 11289600, 0 },
 	{ TEGRA210_CLK_I2S1, TEGRA210_CLK_PLL_A_OUT0, 11289600, 0 },
 	{ TEGRA210_CLK_I2S2, TEGRA210_CLK_PLL_A_OUT0, 11289600, 0 },
@@ -3693,7 +3684,6 @@ static void __init tegra210_clock_init(struct device_node *np)
 	tegra_audio_clk_init(clk_base, pmc_base, tegra210_clks,
 			     tegra210_audio_plls,
 			     ARRAY_SIZE(tegra210_audio_plls), 24576000);
-	tegra_pmc_clk_init(pmc_base, tegra210_clks);
 
 	/* For Tegra210, PLLD is the only source for DSIA & DSIB */
 	value = readl(clk_base + PLLD_BASE);
diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c
index b208914..3255f82 100644
--- a/drivers/clk/tegra/clk-tegra30.c
+++ b/drivers/clk/tegra/clk-tegra30.c
@@ -569,10 +569,9 @@ static struct tegra_devclk devclks[] __initdata = {
 	{ .con_id = "audio3_2x", .dt_id = TEGRA30_CLK_AUDIO3_2X },
 	{ .con_id = "audio4_2x", .dt_id = TEGRA30_CLK_AUDIO4_2X },
 	{ .con_id = "spdif_2x", .dt_id = TEGRA30_CLK_SPDIF_2X },
-	{ .con_id = "extern1", .dev_id = "clk_out_1", .dt_id = TEGRA30_CLK_EXTERN1 },
-	{ .con_id = "extern2", .dev_id = "clk_out_2", .dt_id = TEGRA30_CLK_EXTERN2 },
-	{ .con_id = "extern3", .dev_id = "clk_out_3", .dt_id = TEGRA30_CLK_EXTERN3 },
-	{ .con_id = "blink", .dt_id = TEGRA30_CLK_BLINK },
+	{ .con_id = "extern1", .dt_id = TEGRA30_CLK_EXTERN1 },
+	{ .con_id = "extern2", .dt_id = TEGRA30_CLK_EXTERN2 },
+	{ .con_id = "extern3", .dt_id = TEGRA30_CLK_EXTERN3 },
 	{ .con_id = "cclk_g", .dt_id = TEGRA30_CLK_CCLK_G },
 	{ .con_id = "cclk_lp", .dt_id = TEGRA30_CLK_CCLK_LP },
 	{ .con_id = "sclk", .dt_id = TEGRA30_CLK_SCLK },
@@ -581,8 +580,9 @@ static struct tegra_devclk devclks[] __initdata = {
 	{ .con_id = "twd", .dt_id = TEGRA30_CLK_TWD },
 	{ .con_id = "emc", .dt_id = TEGRA30_CLK_EMC },
 	{ .con_id = "clk_32k", .dt_id = TEGRA30_CLK_CLK_32K },
-	{ .con_id = "clk_m_div2", .dt_id = TEGRA30_CLK_CLK_M_DIV2 },
-	{ .con_id = "clk_m_div4", .dt_id = TEGRA30_CLK_CLK_M_DIV4 },
+	{ .con_id = "osc", .dt_id = TEGRA30_CLK_OSC },
+	{ .con_id = "osc_div2", .dt_id = TEGRA30_CLK_OSC_DIV2 },
+	{ .con_id = "osc_div4", .dt_id = TEGRA30_CLK_OSC_DIV4 },
 	{ .con_id = "cml0", .dt_id = TEGRA30_CLK_CML0 },
 	{ .con_id = "cml1", .dt_id = TEGRA30_CLK_CML1 },
 	{ .con_id = "clk_m", .dt_id = TEGRA30_CLK_CLK_M },
@@ -683,8 +683,9 @@ static struct tegra_devclk devclks[] __initdata = {
 static struct tegra_clk tegra30_clks[tegra_clk_max] __initdata = {
 	[tegra_clk_clk_32k] = { .dt_id = TEGRA30_CLK_CLK_32K, .present = true },
 	[tegra_clk_clk_m] = { .dt_id = TEGRA30_CLK_CLK_M, .present = true },
-	[tegra_clk_clk_m_div2] = { .dt_id = TEGRA30_CLK_CLK_M_DIV2, .present = true },
-	[tegra_clk_clk_m_div4] = { .dt_id = TEGRA30_CLK_CLK_M_DIV4, .present = true },
+	[tegra_clk_osc] = { .dt_id = TEGRA30_CLK_OSC, .present = true },
+	[tegra_clk_osc_div2] = { .dt_id = TEGRA30_CLK_OSC_DIV2, .present = true },
+	[tegra_clk_osc_div4] = { .dt_id = TEGRA30_CLK_OSC_DIV4, .present = true },
 	[tegra_clk_pll_ref] = { .dt_id = TEGRA30_CLK_PLL_REF, .present = true },
 	[tegra_clk_spdif_in_sync] = { .dt_id = TEGRA30_CLK_SPDIF_IN_SYNC, .present = true },
 	[tegra_clk_i2s0_sync] = { .dt_id = TEGRA30_CLK_I2S0_SYNC, .present = true },
@@ -711,13 +712,6 @@ static struct tegra_clk tegra30_clks[tegra_clk_max] __initdata = {
 	[tegra_clk_audio3_2x] = { .dt_id = TEGRA30_CLK_AUDIO3_2X, .present = true },
 	[tegra_clk_audio4_2x] = { .dt_id = TEGRA30_CLK_AUDIO4_2X, .present = true },
 	[tegra_clk_spdif_2x] = { .dt_id = TEGRA30_CLK_SPDIF_2X, .present = true },
-	[tegra_clk_clk_out_1] = { .dt_id = TEGRA30_CLK_CLK_OUT_1, .present = true },
-	[tegra_clk_clk_out_2] = { .dt_id = TEGRA30_CLK_CLK_OUT_2, .present = true },
-	[tegra_clk_clk_out_3] = { .dt_id = TEGRA30_CLK_CLK_OUT_3, .present = true },
-	[tegra_clk_blink] = { .dt_id = TEGRA30_CLK_BLINK, .present = true },
-	[tegra_clk_clk_out_1_mux] = { .dt_id = TEGRA30_CLK_CLK_OUT_1_MUX, .present = true },
-	[tegra_clk_clk_out_2_mux] = { .dt_id = TEGRA30_CLK_CLK_OUT_2_MUX, .present = true },
-	[tegra_clk_clk_out_3_mux] = { .dt_id = TEGRA30_CLK_CLK_OUT_3_MUX, .present = true },
 	[tegra_clk_hclk] = { .dt_id = TEGRA30_CLK_HCLK, .present = true },
 	[tegra_clk_pclk] = { .dt_id = TEGRA30_CLK_PCLK, .present = true },
 	[tegra_clk_i2s0] = { .dt_id = TEGRA30_CLK_I2S0, .present = true },
@@ -1227,12 +1221,8 @@ static struct tegra_clk_init_table init_table[] __initdata = {
 	{ TEGRA30_CLK_UARTC, TEGRA30_CLK_PLL_P, 408000000, 0 },
 	{ TEGRA30_CLK_UARTD, TEGRA30_CLK_PLL_P, 408000000, 0 },
 	{ TEGRA30_CLK_UARTE, TEGRA30_CLK_PLL_P, 408000000, 0 },
-	{ TEGRA30_CLK_PLL_A, TEGRA30_CLK_CLK_MAX, 564480000, 1 },
-	{ TEGRA30_CLK_PLL_A_OUT0, TEGRA30_CLK_CLK_MAX, 11289600, 1 },
-	{ TEGRA30_CLK_EXTERN1, TEGRA30_CLK_PLL_A_OUT0, 0, 1 },
-	{ TEGRA30_CLK_CLK_OUT_1_MUX, TEGRA30_CLK_EXTERN1, 0, 0 },
-	{ TEGRA30_CLK_CLK_OUT_1, TEGRA30_CLK_CLK_MAX, 0, 1 },
-	{ TEGRA30_CLK_BLINK, TEGRA30_CLK_CLK_MAX, 0, 1 },
+	{ TEGRA30_CLK_PLL_A, TEGRA30_CLK_CLK_MAX, 564480000, 0 },
+	{ TEGRA30_CLK_PLL_A_OUT0, TEGRA30_CLK_CLK_MAX, 11289600, 0 },
 	{ TEGRA30_CLK_I2S0, TEGRA30_CLK_PLL_A_OUT0, 11289600, 0 },
 	{ TEGRA30_CLK_I2S1, TEGRA30_CLK_PLL_A_OUT0, 11289600, 0 },
 	{ TEGRA30_CLK_I2S2, TEGRA30_CLK_PLL_A_OUT0, 11289600, 0 },
@@ -1362,7 +1352,6 @@ static void __init tegra30_clock_init(struct device_node *np)
 	tegra_audio_clk_init(clk_base, pmc_base, tegra30_clks,
 			     tegra30_audio_plls,
 			     ARRAY_SIZE(tegra30_audio_plls), 24000000);
-	tegra_pmc_clk_init(pmc_base, tegra30_clks);
 
 	tegra_init_dup_clks(tegra_clk_duplicates, clks, TEGRA30_CLK_CLK_MAX);
 
diff --git a/drivers/clk/tegra/clk.h b/drivers/clk/tegra/clk.h
index 416a6b0..2c9a683 100644
--- a/drivers/clk/tegra/clk.h
+++ b/drivers/clk/tegra/clk.h
@@ -854,7 +854,6 @@ void tegra_periph_clk_init(void __iomem *clk_base, void __iomem *pmc_base,
 			struct tegra_clk *tegra_clks,
 			struct tegra_clk_pll_params *pll_params);
 
-void tegra_pmc_clk_init(void __iomem *pmc_base, struct tegra_clk *tegra_clks);
 void tegra_fixed_clk_init(struct tegra_clk *tegra_clks);
 int tegra_osc_clk_init(void __iomem *clk_base, struct tegra_clk *clks,
 		       unsigned long *input_freqs, unsigned int num,
diff --git a/drivers/clk/ti/clk-814x.c b/drivers/clk/ti/clk-814x.c
index 087cfa7..4f8bd34 100644
--- a/drivers/clk/ti/clk-814x.c
+++ b/drivers/clk/ti/clk-814x.c
@@ -25,7 +25,6 @@ static const struct omap_clkctrl_reg_data dm814_alwon_clkctrl_regs[] __initconst
 	{ DM814_WD_TIMER_CLKCTRL, NULL, CLKF_SW_SUP | CLKF_NO_IDLEST, "sysclk18_ck" },
 	{ DM814_MCSPI1_CLKCTRL, NULL, CLKF_SW_SUP, "sysclk10_ck" },
 	{ DM814_GPMC_CLKCTRL, NULL, CLKF_SW_SUP, "sysclk6_ck" },
-	{ DM814_CPGMAC0_CLKCTRL, NULL, CLKF_SW_SUP, "cpsw_125mhz_gclk" },
 	{ DM814_MPU_CLKCTRL, NULL, CLKF_SW_SUP, "mpu_ck" },
 	{ DM814_RTC_CLKCTRL, NULL, CLKF_SW_SUP | CLKF_NO_IDLEST, "sysclk18_ck" },
 	{ DM814_TPCC_CLKCTRL, NULL, CLKF_SW_SUP, "sysclk4_ck" },
@@ -39,9 +38,15 @@ static const struct omap_clkctrl_reg_data dm814_alwon_clkctrl_regs[] __initconst
 	{ 0 },
 };
 
+static const struct
+omap_clkctrl_reg_data dm814_alwon_ethernet_clkctrl_regs[] __initconst = {
+	{ 0, NULL, CLKF_SW_SUP, "cpsw_125mhz_gclk" },
+};
+
 const struct omap_clkctrl_data dm814_clkctrl_data[] __initconst = {
 	{ 0x48180500, dm814_default_clkctrl_regs },
 	{ 0x48181400, dm814_alwon_clkctrl_regs },
+	{ 0x481815d4, dm814_alwon_ethernet_clkctrl_regs },
 	{ 0 },
 };
 
diff --git a/drivers/clk/versatile/clk-icst.c b/drivers/clk/versatile/clk-icst.c
index fe686f7..692be2f 100644
--- a/drivers/clk/versatile/clk-icst.c
+++ b/drivers/clk/versatile/clk-icst.c
@@ -34,18 +34,6 @@
 #define INTEGRATOR_AP_PCI_25_33_MHZ BIT(8)
 
 /**
- * enum icst_control_type - the type of ICST control register
- */
-enum icst_control_type {
-	ICST_VERSATILE, /* The standard type, all control bits available */
-	ICST_INTEGRATOR_AP_CM, /* Only 8 bits of VDW available */
-	ICST_INTEGRATOR_AP_SYS, /* Only 8 bits of VDW available */
-	ICST_INTEGRATOR_AP_PCI, /* Odd bit pattern storage */
-	ICST_INTEGRATOR_CP_CM_CORE, /* Only 8 bits of VDW and 3 bits of OD */
-	ICST_INTEGRATOR_CP_CM_MEM, /* Only 8 bits of VDW and 3 bits of OD */
-};
-
-/**
  * struct clk_icst - ICST VCO clock wrapper
  * @hw: corresponding clock hardware entry
  * @vcoreg: VCO register address
@@ -344,12 +332,12 @@ static const struct clk_ops icst_ops = {
 	.set_rate = icst_set_rate,
 };
 
-static struct clk *icst_clk_setup(struct device *dev,
-				  const struct clk_icst_desc *desc,
-				  const char *name,
-				  const char *parent_name,
-				  struct regmap *map,
-				  enum icst_control_type ctype)
+struct clk *icst_clk_setup(struct device *dev,
+			   const struct clk_icst_desc *desc,
+			   const char *name,
+			   const char *parent_name,
+			   struct regmap *map,
+			   enum icst_control_type ctype)
 {
 	struct clk *clk;
 	struct clk_icst *icst;
@@ -386,6 +374,7 @@ static struct clk *icst_clk_setup(struct device *dev,
 
 	return clk;
 }
+EXPORT_SYMBOL_GPL(icst_clk_setup);
 
 struct clk *icst_clk_register(struct device *dev,
 			const struct clk_icst_desc *desc,
diff --git a/drivers/clk/versatile/clk-icst.h b/drivers/clk/versatile/clk-icst.h
index e36ca1a..1a119ef 100644
--- a/drivers/clk/versatile/clk-icst.h
+++ b/drivers/clk/versatile/clk-icst.h
@@ -1,4 +1,19 @@
 /* SPDX-License-Identifier: GPL-2.0 */
+struct regmap;
+
+/**
+ * enum icst_control_type - the type of ICST control register
+ */
+enum icst_control_type {
+	ICST_VERSATILE, /* The standard type, all control bits available */
+	ICST_INTEGRATOR_AP_CM, /* Only 8 bits of VDW available */
+	ICST_INTEGRATOR_AP_SYS, /* Only 8 bits of VDW available */
+	ICST_INTEGRATOR_AP_PCI, /* Odd bit pattern storage */
+	ICST_INTEGRATOR_CP_CM_CORE, /* Only 8 bits of VDW and 3 bits of OD */
+	ICST_INTEGRATOR_CP_CM_MEM, /* Only 8 bits of VDW and 3 bits of OD */
+	ICST_INTEGRATOR_IM_PD1, /* Like the Versatile, all control bits */
+};
+
 /**
  * struct clk_icst_desc - descriptor for the ICST VCO
  * @params: ICST parameters
@@ -17,3 +32,10 @@ struct clk *icst_clk_register(struct device *dev,
 			      const char *name,
 			      const char *parent_name,
 			      void __iomem *base);
+
+struct clk *icst_clk_setup(struct device *dev,
+			   const struct clk_icst_desc *desc,
+			   const char *name,
+			   const char *parent_name,
+			   struct regmap *map,
+			   enum icst_control_type ctype);
diff --git a/drivers/clk/versatile/clk-impd1.c b/drivers/clk/versatile/clk-impd1.c
index 1991f15..b05da85 100644
--- a/drivers/clk/versatile/clk-impd1.c
+++ b/drivers/clk/versatile/clk-impd1.c
@@ -7,7 +7,11 @@
 #include <linux/clkdev.h>
 #include <linux/err.h>
 #include <linux/io.h>
+#include <linux/platform_device.h>
 #include <linux/platform_data/clk-integrator.h>
+#include <linux/module.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
 
 #include "icst.h"
 #include "clk-icst.h"
@@ -175,3 +179,78 @@ void integrator_impd1_clk_exit(unsigned int id)
 	kfree(imc->pclkname);
 }
 EXPORT_SYMBOL_GPL(integrator_impd1_clk_exit);
+
+static int integrator_impd1_clk_spawn(struct device *dev,
+				      struct device_node *parent,
+				      struct device_node *np)
+{
+	struct regmap *map;
+	struct clk *clk = ERR_PTR(-EINVAL);
+	const char *name = np->name;
+	const char *parent_name;
+	const struct clk_icst_desc *desc;
+	int ret;
+
+	map = syscon_node_to_regmap(parent);
+	if (IS_ERR(map)) {
+		pr_err("no regmap for syscon IM-PD1 ICST clock parent\n");
+		return PTR_ERR(map);
+	}
+
+	if (of_device_is_compatible(np, "arm,impd1-vco1")) {
+		desc = &impd1_icst1_desc;
+	} else if (of_device_is_compatible(np, "arm,impd1-vco2")) {
+		desc = &impd1_icst2_desc;
+	} else {
+		dev_err(dev, "not a clock node %s\n", name);
+		return -ENODEV;
+	}
+
+	parent_name = of_clk_get_parent_name(np, 0);
+	clk = icst_clk_setup(NULL, desc, name, parent_name, map,
+			     ICST_INTEGRATOR_IM_PD1);
+	if (!IS_ERR(clk)) {
+		of_clk_add_provider(np, of_clk_src_simple_get, clk);
+		ret = 0;
+	} else {
+		dev_err(dev, "error setting up IM-PD1 ICST clock\n");
+		ret = PTR_ERR(clk);
+	}
+
+	return ret;
+}
+
+static int integrator_impd1_clk_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct device_node *child;
+	int ret = 0;
+
+	for_each_available_child_of_node(np, child) {
+		ret = integrator_impd1_clk_spawn(dev, np, child);
+		if (ret)
+			break;
+	}
+
+	return ret;
+}
+
+static const struct of_device_id impd1_syscon_match[] = {
+	{ .compatible = "arm,im-pd1-syscon", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, impd1_syscon_match);
+
+static struct platform_driver impd1_clk_driver = {
+	.driver = {
+		.name = "impd1-clk",
+		.of_match_table = impd1_syscon_match,
+	},
+	.probe  = integrator_impd1_clk_probe,
+};
+builtin_platform_driver(impd1_clk_driver);
+
+MODULE_AUTHOR("Linus Walleij <linusw@kernel.org>");
+MODULE_DESCRIPTION("Arm IM-PD1 module clock driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/clocksource/timer-vf-pit.c b/drivers/clocksource/timer-vf-pit.c
index 7ad4a8b..1a86a4e 100644
--- a/drivers/clocksource/timer-vf-pit.c
+++ b/drivers/clocksource/timer-vf-pit.c
@@ -129,7 +129,7 @@ static int __init pit_clockevent_init(unsigned long rate, int irq)
 	__raw_writel(PITTFLG_TIF, clkevt_base + PITTFLG);
 
 	BUG_ON(request_irq(irq, pit_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
-			   "VF pit timer", &clockevent_pit);
+			   "VF pit timer", &clockevent_pit));
 
 	clockevent_pit.cpumask = cpumask_of(0);
 	clockevent_pit.irq = irq;
diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
index bff5295..c3e6bd5 100644
--- a/drivers/cpufreq/Kconfig
+++ b/drivers/cpufreq/Kconfig
@@ -37,10 +37,12 @@
 choice
 	prompt "Default CPUFreq governor"
 	default CPU_FREQ_DEFAULT_GOV_USERSPACE if ARM_SA1100_CPUFREQ || ARM_SA1110_CPUFREQ
+	default CPU_FREQ_DEFAULT_GOV_SCHEDUTIL if BIG_LITTLE
+	default CPU_FREQ_DEFAULT_GOV_SCHEDUTIL if X86_INTEL_PSTATE && SMP
 	default CPU_FREQ_DEFAULT_GOV_PERFORMANCE
 	help
 	  This option sets which CPUFreq governor shall be loaded at
-	  startup. If in doubt, select 'performance'.
+	  startup. If in doubt, use the default setting.
 
 config CPU_FREQ_DEFAULT_GOV_PERFORMANCE
 	bool "performance"
diff --git a/drivers/cpufreq/Kconfig.x86 b/drivers/cpufreq/Kconfig.x86
index 62502d0..bc58a08 100644
--- a/drivers/cpufreq/Kconfig.x86
+++ b/drivers/cpufreq/Kconfig.x86
@@ -8,6 +8,8 @@
 	depends on X86
 	select ACPI_PROCESSOR if ACPI
 	select ACPI_CPPC_LIB if X86_64 && ACPI && SCHED_MC_PRIO
+	select CPU_FREQ_GOV_PERFORMANCE
+	select CPU_FREQ_GOV_SCHEDUTIL if SMP
 	help
 	  This driver provides a P state for Intel core processors.
 	  The driver implements an internal governor and will become
diff --git a/drivers/cpufreq/powernv-cpufreq.c b/drivers/cpufreq/powernv-cpufreq.c
index 56f4bc0..8646eb1 100644
--- a/drivers/cpufreq/powernv-cpufreq.c
+++ b/drivers/cpufreq/powernv-cpufreq.c
@@ -902,6 +902,7 @@ static struct notifier_block powernv_cpufreq_reboot_nb = {
 void powernv_cpufreq_work_fn(struct work_struct *work)
 {
 	struct chip *chip = container_of(work, struct chip, throttle);
+	struct cpufreq_policy *policy;
 	unsigned int cpu;
 	cpumask_t mask;
 
@@ -916,12 +917,14 @@ void powernv_cpufreq_work_fn(struct work_struct *work)
 	chip->restore = false;
 	for_each_cpu(cpu, &mask) {
 		int index;
-		struct cpufreq_policy policy;
 
-		cpufreq_get_policy(&policy, cpu);
-		index = cpufreq_table_find_index_c(&policy, policy.cur);
-		powernv_cpufreq_target_index(&policy, index);
-		cpumask_andnot(&mask, &mask, policy.cpus);
+		policy = cpufreq_cpu_get(cpu);
+		if (!policy)
+			continue;
+		index = cpufreq_table_find_index_c(policy, policy->cur);
+		powernv_cpufreq_target_index(policy, index);
+		cpumask_andnot(&mask, &mask, policy->cpus);
+		cpufreq_cpu_put(policy);
 	}
 out:
 	put_online_cpus();
@@ -1080,6 +1083,12 @@ static int init_chip_info(void)
 
 static inline void clean_chip_info(void)
 {
+	int i;
+
+	/* flush any pending work items */
+	if (chips)
+		for (i = 0; i < nr_chips; i++)
+			cancel_work_sync(&chips[i].throttle);
 	kfree(chips);
 }
 
@@ -1108,9 +1117,6 @@ static int __init powernv_cpufreq_init(void)
 	if (rc)
 		goto out;
 
-	register_reboot_notifier(&powernv_cpufreq_reboot_nb);
-	opal_message_notifier_register(OPAL_MSG_OCC, &powernv_cpufreq_opal_nb);
-
 	if (powernv_pstate_info.wof_enabled)
 		powernv_cpufreq_driver.boost_enabled = true;
 	else
@@ -1119,15 +1125,17 @@ static int __init powernv_cpufreq_init(void)
 	rc = cpufreq_register_driver(&powernv_cpufreq_driver);
 	if (rc) {
 		pr_info("Failed to register the cpufreq driver (%d)\n", rc);
-		goto cleanup_notifiers;
+		goto cleanup;
 	}
 
 	if (powernv_pstate_info.wof_enabled)
 		cpufreq_enable_boost_support();
 
+	register_reboot_notifier(&powernv_cpufreq_reboot_nb);
+	opal_message_notifier_register(OPAL_MSG_OCC, &powernv_cpufreq_opal_nb);
+
 	return 0;
-cleanup_notifiers:
-	unregister_all_notifiers();
+cleanup:
 	clean_chip_info();
 out:
 	pr_info("Platform driver disabled. System does not support PState control\n");
diff --git a/drivers/cpuidle/Kconfig.arm b/drivers/cpuidle/Kconfig.arm
index 62272ec..99a2d72 100644
--- a/drivers/cpuidle/Kconfig.arm
+++ b/drivers/cpuidle/Kconfig.arm
@@ -86,3 +86,11 @@
 	depends on (ARCH_MVEBU || COMPILE_TEST) && !ARM64
 	help
 	  Select this to enable cpuidle on Armada 370, 38x and XP processors.
+
+config ARM_TEGRA_CPUIDLE
+	bool "CPU Idle Driver for NVIDIA Tegra SoCs"
+	depends on ARCH_TEGRA && !ARM64
+	select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
+	select ARM_CPU_SUSPEND
+	help
+	  Select this to enable cpuidle for NVIDIA Tegra20/30/114/124 SoCs.
diff --git a/drivers/cpuidle/Makefile b/drivers/cpuidle/Makefile
index cc8c769..55a464f 100644
--- a/drivers/cpuidle/Makefile
+++ b/drivers/cpuidle/Makefile
@@ -24,6 +24,7 @@
 obj-$(CONFIG_ARM_PSCI_CPUIDLE)		+= cpuidle_psci.o
 cpuidle_psci-y				:= cpuidle-psci.o
 cpuidle_psci-$(CONFIG_PM_GENERIC_DOMAINS_OF) += cpuidle-psci-domain.o
+obj-$(CONFIG_ARM_TEGRA_CPUIDLE)		+= cpuidle-tegra.o
 
 ###############################################################################
 # MIPS drivers
diff --git a/drivers/cpuidle/cpuidle-haltpoll.c b/drivers/cpuidle/cpuidle-haltpoll.c
index db124bc..fcc5321 100644
--- a/drivers/cpuidle/cpuidle-haltpoll.c
+++ b/drivers/cpuidle/cpuidle-haltpoll.c
@@ -94,7 +94,7 @@ static void haltpoll_uninit(void)
 	haltpoll_cpuidle_devices = NULL;
 }
 
-static bool haltpool_want(void)
+static bool haltpoll_want(void)
 {
 	return kvm_para_has_hint(KVM_HINTS_REALTIME) || force;
 }
@@ -110,7 +110,7 @@ static int __init haltpoll_init(void)
 
 	cpuidle_poll_state_init(drv);
 
-	if (!kvm_para_available() || !haltpool_want())
+	if (!kvm_para_available() || !haltpoll_want())
 		return -ENODEV;
 
 	ret = cpuidle_register_driver(drv);
diff --git a/drivers/cpuidle/cpuidle-tegra.c b/drivers/cpuidle/cpuidle-tegra.c
new file mode 100644
index 0000000..313b029
--- /dev/null
+++ b/drivers/cpuidle/cpuidle-tegra.c
@@ -0,0 +1,392 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * CPU idle driver for Tegra CPUs
+ *
+ * Copyright (c) 2010-2013, NVIDIA Corporation.
+ * Copyright (c) 2011 Google, Inc.
+ * Author: Colin Cross <ccross@android.com>
+ *         Gary King <gking@nvidia.com>
+ *
+ * Rework for 3.3 by Peter De Schrijver <pdeschrijver@nvidia.com>
+ *
+ * Tegra20/124 driver unification by Dmitry Osipenko <digetx@gmail.com>
+ */
+
+#define pr_fmt(fmt)	"tegra-cpuidle: " fmt
+
+#include <linux/atomic.h>
+#include <linux/cpuidle.h>
+#include <linux/cpumask.h>
+#include <linux/cpu_pm.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+#include <linux/clk/tegra.h>
+#include <linux/firmware/trusted_foundations.h>
+
+#include <soc/tegra/cpuidle.h>
+#include <soc/tegra/flowctrl.h>
+#include <soc/tegra/fuse.h>
+#include <soc/tegra/irq.h>
+#include <soc/tegra/pm.h>
+#include <soc/tegra/pmc.h>
+
+#include <asm/cpuidle.h>
+#include <asm/firmware.h>
+#include <asm/smp_plat.h>
+#include <asm/suspend.h>
+
+enum tegra_state {
+	TEGRA_C1,
+	TEGRA_C7,
+	TEGRA_CC6,
+	TEGRA_STATE_COUNT,
+};
+
+static atomic_t tegra_idle_barrier;
+static atomic_t tegra_abort_flag;
+
+static inline bool tegra_cpuidle_using_firmware(void)
+{
+	return firmware_ops->prepare_idle && firmware_ops->do_idle;
+}
+
+static void tegra_cpuidle_report_cpus_state(void)
+{
+	unsigned long cpu, lcpu, csr;
+
+	for_each_cpu(lcpu, cpu_possible_mask) {
+		cpu = cpu_logical_map(lcpu);
+		csr = flowctrl_read_cpu_csr(cpu);
+
+		pr_err("cpu%lu: online=%d flowctrl_csr=0x%08lx\n",
+		       cpu, cpu_online(lcpu), csr);
+	}
+}
+
+static int tegra_cpuidle_wait_for_secondary_cpus_parking(void)
+{
+	unsigned int retries = 3;
+
+	while (retries--) {
+		unsigned int delay_us = 10;
+		unsigned int timeout_us = 500 * 1000 / delay_us;
+
+		/*
+		 * The primary CPU0 core shall wait for the secondaries
+		 * shutdown in order to power-off CPU's cluster safely.
+		 * The timeout value depends on the current CPU frequency,
+		 * it takes about 40-150us in average and over 1000us in
+		 * a worst case scenario.
+		 */
+		do {
+			if (tegra_cpu_rail_off_ready())
+				return 0;
+
+			udelay(delay_us);
+
+		} while (timeout_us--);
+
+		pr_err("secondary CPU taking too long to park\n");
+
+		tegra_cpuidle_report_cpus_state();
+	}
+
+	pr_err("timed out waiting secondaries to park\n");
+
+	return -ETIMEDOUT;
+}
+
+static void tegra_cpuidle_unpark_secondary_cpus(void)
+{
+	unsigned int cpu, lcpu;
+
+	for_each_cpu(lcpu, cpu_online_mask) {
+		cpu = cpu_logical_map(lcpu);
+
+		if (cpu > 0) {
+			tegra_enable_cpu_clock(cpu);
+			tegra_cpu_out_of_reset(cpu);
+			flowctrl_write_cpu_halt(cpu, 0);
+		}
+	}
+}
+
+static int tegra_cpuidle_cc6_enter(unsigned int cpu)
+{
+	int ret;
+
+	if (cpu > 0) {
+		ret = cpu_suspend(cpu, tegra_pm_park_secondary_cpu);
+	} else {
+		ret = tegra_cpuidle_wait_for_secondary_cpus_parking();
+		if (!ret)
+			ret = tegra_pm_enter_lp2();
+
+		tegra_cpuidle_unpark_secondary_cpus();
+	}
+
+	return ret;
+}
+
+static int tegra_cpuidle_c7_enter(void)
+{
+	int err;
+
+	if (tegra_cpuidle_using_firmware()) {
+		err = call_firmware_op(prepare_idle, TF_PM_MODE_LP2_NOFLUSH_L2);
+		if (err)
+			return err;
+
+		return call_firmware_op(do_idle, 0);
+	}
+
+	return cpu_suspend(0, tegra30_pm_secondary_cpu_suspend);
+}
+
+static int tegra_cpuidle_coupled_barrier(struct cpuidle_device *dev)
+{
+	if (tegra_pending_sgi()) {
+		/*
+		 * CPU got local interrupt that will be lost after GIC's
+		 * shutdown because GIC driver doesn't save/restore the
+		 * pending SGI state across CPU cluster PM.  Abort and retry
+		 * next time.
+		 */
+		atomic_set(&tegra_abort_flag, 1);
+	}
+
+	cpuidle_coupled_parallel_barrier(dev, &tegra_idle_barrier);
+
+	if (atomic_read(&tegra_abort_flag)) {
+		cpuidle_coupled_parallel_barrier(dev, &tegra_idle_barrier);
+		atomic_set(&tegra_abort_flag, 0);
+		return -EINTR;
+	}
+
+	return 0;
+}
+
+static int tegra_cpuidle_state_enter(struct cpuidle_device *dev,
+				     int index, unsigned int cpu)
+{
+	int ret;
+
+	/*
+	 * CC6 state is the "CPU cluster power-off" state.  In order to
+	 * enter this state, at first the secondary CPU cores need to be
+	 * parked into offline mode, then the last CPU should clean out
+	 * remaining dirty cache lines into DRAM and trigger Flow Controller
+	 * logic that turns off the cluster's power domain (which includes
+	 * CPU cores, GIC and L2 cache).
+	 */
+	if (index == TEGRA_CC6) {
+		ret = tegra_cpuidle_coupled_barrier(dev);
+		if (ret)
+			return ret;
+	}
+
+	local_fiq_disable();
+	tegra_pm_set_cpu_in_lp2();
+	cpu_pm_enter();
+
+	switch (index) {
+	case TEGRA_C7:
+		ret = tegra_cpuidle_c7_enter();
+		break;
+
+	case TEGRA_CC6:
+		ret = tegra_cpuidle_cc6_enter(cpu);
+		break;
+
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	cpu_pm_exit();
+	tegra_pm_clear_cpu_in_lp2();
+	local_fiq_enable();
+
+	return ret;
+}
+
+static int tegra_cpuidle_adjust_state_index(int index, unsigned int cpu)
+{
+	/*
+	 * On Tegra30 CPU0 can't be power-gated separately from secondary
+	 * cores because it gates the whole CPU cluster.
+	 */
+	if (cpu > 0 || index != TEGRA_C7 || tegra_get_chip_id() != TEGRA30)
+		return index;
+
+	/* put CPU0 into C1 if C7 is requested and secondaries are online */
+	if (!IS_ENABLED(CONFIG_PM_SLEEP) || num_online_cpus() > 1)
+		index = TEGRA_C1;
+	else
+		index = TEGRA_CC6;
+
+	return index;
+}
+
+static int tegra_cpuidle_enter(struct cpuidle_device *dev,
+			       struct cpuidle_driver *drv,
+			       int index)
+{
+	unsigned int cpu = cpu_logical_map(dev->cpu);
+	int err;
+
+	index = tegra_cpuidle_adjust_state_index(index, cpu);
+	if (dev->states_usage[index].disable)
+		return -1;
+
+	if (index == TEGRA_C1)
+		err = arm_cpuidle_simple_enter(dev, drv, index);
+	else
+		err = tegra_cpuidle_state_enter(dev, index, cpu);
+
+	if (err && (err != -EINTR || index != TEGRA_CC6))
+		pr_err_once("failed to enter state %d err: %d\n", index, err);
+
+	return err ? -1 : index;
+}
+
+static void tegra114_enter_s2idle(struct cpuidle_device *dev,
+				  struct cpuidle_driver *drv,
+				  int index)
+{
+	tegra_cpuidle_enter(dev, drv, index);
+}
+
+/*
+ * The previous versions of Tegra CPUIDLE driver used a different "legacy"
+ * terminology for naming of the idling states, while this driver uses the
+ * new terminology.
+ *
+ * Mapping of the old terms into the new ones:
+ *
+ * Old | New
+ * ---------
+ * LP3 | C1	(CPU core clock gating)
+ * LP2 | C7	(CPU core power gating)
+ * LP2 | CC6	(CPU cluster power gating)
+ *
+ * Note that that the older CPUIDLE driver versions didn't explicitly
+ * differentiate the LP2 states because these states either used the same
+ * code path or because CC6 wasn't supported.
+ */
+static struct cpuidle_driver tegra_idle_driver = {
+	.name = "tegra_idle",
+	.states = {
+		[TEGRA_C1] = ARM_CPUIDLE_WFI_STATE_PWR(600),
+		[TEGRA_C7] = {
+			.enter			= tegra_cpuidle_enter,
+			.exit_latency		= 2000,
+			.target_residency	= 2200,
+			.power_usage		= 100,
+			.flags			= CPUIDLE_FLAG_TIMER_STOP,
+			.name			= "C7",
+			.desc			= "CPU core powered off",
+		},
+		[TEGRA_CC6] = {
+			.enter			= tegra_cpuidle_enter,
+			.exit_latency		= 5000,
+			.target_residency	= 10000,
+			.power_usage		= 0,
+			.flags			= CPUIDLE_FLAG_TIMER_STOP |
+						  CPUIDLE_FLAG_COUPLED,
+			.name			= "CC6",
+			.desc			= "CPU cluster powered off",
+		},
+	},
+	.state_count = TEGRA_STATE_COUNT,
+	.safe_state_index = TEGRA_C1,
+};
+
+static inline void tegra_cpuidle_disable_state(enum tegra_state state)
+{
+	cpuidle_driver_state_disabled(&tegra_idle_driver, state, true);
+}
+
+/*
+ * Tegra20 HW appears to have a bug such that PCIe device interrupts, whether
+ * they are legacy IRQs or MSI, are lost when CC6 is enabled.  To work around
+ * this, simply disable CC6 if the PCI driver and DT node are both enabled.
+ */
+void tegra_cpuidle_pcie_irqs_in_use(void)
+{
+	struct cpuidle_state *state_cc6 = &tegra_idle_driver.states[TEGRA_CC6];
+
+	if ((state_cc6->flags & CPUIDLE_FLAG_UNUSABLE) ||
+	    tegra_get_chip_id() != TEGRA20)
+		return;
+
+	pr_info("disabling CC6 state, since PCIe IRQs are in use\n");
+	tegra_cpuidle_disable_state(TEGRA_CC6);
+}
+
+static void tegra_cpuidle_setup_tegra114_c7_state(void)
+{
+	struct cpuidle_state *s = &tegra_idle_driver.states[TEGRA_C7];
+
+	s->enter_s2idle = tegra114_enter_s2idle;
+	s->target_residency = 1000;
+	s->exit_latency = 500;
+}
+
+static int tegra_cpuidle_probe(struct platform_device *pdev)
+{
+	/* LP2 could be disabled in device-tree */
+	if (tegra_pmc_get_suspend_mode() < TEGRA_SUSPEND_LP2)
+		tegra_cpuidle_disable_state(TEGRA_CC6);
+
+	/*
+	 * Required suspend-resume functionality, which is provided by the
+	 * Tegra-arch core and PMC driver, is unavailable if PM-sleep option
+	 * is disabled.
+	 */
+	if (!IS_ENABLED(CONFIG_PM_SLEEP)) {
+		if (!tegra_cpuidle_using_firmware())
+			tegra_cpuidle_disable_state(TEGRA_C7);
+
+		tegra_cpuidle_disable_state(TEGRA_CC6);
+	}
+
+	/*
+	 * Generic WFI state (also known as C1 or LP3) and the coupled CPU
+	 * cluster power-off (CC6 or LP2) states are common for all Tegra SoCs.
+	 */
+	switch (tegra_get_chip_id()) {
+	case TEGRA20:
+		/* Tegra20 isn't capable to power-off individual CPU cores */
+		tegra_cpuidle_disable_state(TEGRA_C7);
+		break;
+
+	case TEGRA30:
+		tegra_cpuidle_disable_state(TEGRA_CC6);
+		break;
+
+	case TEGRA114:
+	case TEGRA124:
+		tegra_cpuidle_setup_tegra114_c7_state();
+
+		/* coupled CC6 (LP2) state isn't implemented yet */
+		tegra_cpuidle_disable_state(TEGRA_CC6);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return cpuidle_register(&tegra_idle_driver, cpu_possible_mask);
+}
+
+static struct platform_driver tegra_cpuidle_driver = {
+	.probe = tegra_cpuidle_probe,
+	.driver = {
+		.name = "tegra-cpuidle",
+	},
+};
+builtin_platform_driver(tegra_cpuidle_driver);
diff --git a/drivers/crypto/chelsio/chcr_ktls.c b/drivers/crypto/chelsio/chcr_ktls.c
index 73658b7..cd1769e 100644
--- a/drivers/crypto/chelsio/chcr_ktls.c
+++ b/drivers/crypto/chelsio/chcr_ktls.c
@@ -2,6 +2,7 @@
 /* Copyright (C) 2020 Chelsio Communications.  All rights reserved. */
 
 #ifdef CONFIG_CHELSIO_TLS_DEVICE
+#include <linux/highmem.h>
 #include "chcr_ktls.h"
 #include "clip_tbl.h"
 
diff --git a/drivers/crypto/hisilicon/Kconfig b/drivers/crypto/hisilicon/Kconfig
index 095850d..f09c6cf 100644
--- a/drivers/crypto/hisilicon/Kconfig
+++ b/drivers/crypto/hisilicon/Kconfig
@@ -27,6 +27,7 @@
 	select CRYPTO_SHA256
 	select CRYPTO_SHA512
 	depends on PCI && PCI_MSI
+	depends on UACCE || UACCE=n
 	depends on ARM64 || (COMPILE_TEST && 64BIT)
 	help
 	  Support for HiSilicon SEC Engine of version 2 in crypto subsystem.
@@ -58,6 +59,7 @@
 config CRYPTO_DEV_HISI_HPRE
 	tristate "Support for HISI HPRE accelerator"
 	depends on PCI && PCI_MSI
+	depends on UACCE || UACCE=n
 	depends on ARM64 || (COMPILE_TEST && 64BIT)
 	select CRYPTO_DEV_HISI_QM
 	select CRYPTO_DH
diff --git a/drivers/crypto/marvell/octeontx/otx_cptvf_algs.c b/drivers/crypto/marvell/octeontx/otx_cptvf_algs.c
index 946fb629..06202bc 100644
--- a/drivers/crypto/marvell/octeontx/otx_cptvf_algs.c
+++ b/drivers/crypto/marvell/octeontx/otx_cptvf_algs.c
@@ -1161,13 +1161,13 @@ static inline u32 create_aead_null_output_list(struct aead_request *req,
 					   inputlen);
 		if (status != inputlen) {
 			status = -EINVAL;
-			goto error;
+			goto error_free;
 		}
 		status = sg_copy_from_buffer(req->dst, sg_nents(req->dst), ptr,
 					     inputlen);
 		if (status != inputlen) {
 			status = -EINVAL;
-			goto error;
+			goto error_free;
 		}
 		kfree(ptr);
 	}
@@ -1209,8 +1209,10 @@ static inline u32 create_aead_null_output_list(struct aead_request *req,
 
 	req_info->outcnt = argcnt;
 	return 0;
-error:
+
+error_free:
 	kfree(ptr);
+error:
 	return status;
 }
 
diff --git a/drivers/crypto/vmx/.gitignore b/drivers/crypto/vmx/.gitignore
index af4a7ce..7aa71d8 100644
--- a/drivers/crypto/vmx/.gitignore
+++ b/drivers/crypto/vmx/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 aesp8-ppc.S
 ghashp8-ppc.S
diff --git a/drivers/dax/bus.c b/drivers/dax/bus.c
index 46e4604..df238c8 100644
--- a/drivers/dax/bus.c
+++ b/drivers/dax/bus.c
@@ -421,8 +421,10 @@ struct dev_dax *__devm_create_dev_dax(struct dax_region *dax_region, int id,
 	 * device outside of mmap of the resulting character device.
 	 */
 	dax_dev = alloc_dax(dev_dax, NULL, NULL, DAXDEV_F_SYNC);
-	if (!dax_dev)
+	if (IS_ERR(dax_dev)) {
+		rc = PTR_ERR(dax_dev);
 		goto err;
+	}
 
 	/* a device_dax instance is dead while the driver is not attached */
 	kill_dax(dax_dev);
diff --git a/drivers/dax/super.c b/drivers/dax/super.c
index 0aa4b6b..8e32345 100644
--- a/drivers/dax/super.c
+++ b/drivers/dax/super.c
@@ -344,6 +344,23 @@ size_t dax_copy_to_iter(struct dax_device *dax_dev, pgoff_t pgoff, void *addr,
 }
 EXPORT_SYMBOL_GPL(dax_copy_to_iter);
 
+int dax_zero_page_range(struct dax_device *dax_dev, pgoff_t pgoff,
+			size_t nr_pages)
+{
+	if (!dax_alive(dax_dev))
+		return -ENXIO;
+	/*
+	 * There are no callers that want to zero more than one page as of now.
+	 * Once users are there, this check can be removed after the
+	 * device mapper code has been updated to split ranges across targets.
+	 */
+	if (nr_pages != 1)
+		return -EIO;
+
+	return dax_dev->ops->zero_page_range(dax_dev, pgoff, nr_pages);
+}
+EXPORT_SYMBOL_GPL(dax_zero_page_range);
+
 #ifdef CONFIG_ARCH_HAS_PMEM_API
 void arch_wb_cache_pmem(void *addr, size_t size);
 void dax_flush(struct dax_device *dax_dev, void *addr, size_t size)
@@ -551,9 +568,16 @@ struct dax_device *alloc_dax(void *private, const char *__host,
 	dev_t devt;
 	int minor;
 
+	if (ops && !ops->zero_page_range) {
+		pr_debug("%s: error: device does not provide dax"
+			 " operation zero_page_range()\n",
+			 __host ? __host : "Unknown");
+		return ERR_PTR(-EINVAL);
+	}
+
 	host = kstrdup(__host, GFP_KERNEL);
 	if (__host && !host)
-		return NULL;
+		return ERR_PTR(-ENOMEM);
 
 	minor = ida_simple_get(&dax_minor_ida, 0, MINORMASK+1, GFP_KERNEL);
 	if (minor < 0)
@@ -576,7 +600,7 @@ struct dax_device *alloc_dax(void *private, const char *__host,
 	ida_simple_remove(&dax_minor_ida, minor);
  err_minor:
 	kfree(host);
-	return NULL;
+	return ERR_PTR(-ENOMEM);
 }
 EXPORT_SYMBOL_GPL(alloc_dax);
 
diff --git a/drivers/dma-buf/Kconfig b/drivers/dma-buf/Kconfig
index ef73b67..9626673 100644
--- a/drivers/dma-buf/Kconfig
+++ b/drivers/dma-buf/Kconfig
@@ -43,11 +43,12 @@
 	bool "Move notify between drivers (EXPERIMENTAL)"
 	default n
 	help
-	  Don''t pin buffers if the dynamic DMA-buf interface is available on both the
-	  exporter as well as the importer. This fixes a security problem where
-	  userspace is able to pin unrestricted amounts of memory through DMA-buf.
-	  But marked experimental because we don''t jet have a consistent execution
-	  context and memory management between drivers.
+	  Don't pin buffers if the dynamic DMA-buf interface is available on
+	  both the exporter as well as the importer. This fixes a security
+	  problem where userspace is able to pin unrestricted amounts of memory
+	  through DMA-buf.
+	  This is marked experimental because we don't yet have a consistent
+	  execution context and memory management between drivers.
 
 config DMABUF_SELFTESTS
 	tristate "Selftests for the dma-buf interfaces"
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 5142da4..0924836 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -616,8 +616,8 @@
 	  integrated in chips such as the Toshiba TX4927/38/39.
 
 config TEGRA20_APB_DMA
-	bool "NVIDIA Tegra20 APB DMA support"
-	depends on ARCH_TEGRA
+	tristate "NVIDIA Tegra20 APB DMA support"
+	depends on ARCH_TEGRA || COMPILE_TEST
 	select DMA_ENGINE
 	help
 	  Support for the NVIDIA Tegra20 APB DMA controller driver. The
@@ -658,6 +658,17 @@
 	  UniPhier platform.  This DMA controller is used as the external
 	  DMA engine of the SD/eMMC controllers of the LD4, Pro4, sLD8 SoCs.
 
+config UNIPHIER_XDMAC
+	tristate "UniPhier XDMAC support"
+	depends on ARCH_UNIPHIER || COMPILE_TEST
+	depends on OF
+	select DMA_ENGINE
+	select DMA_VIRTUAL_CHANNELS
+	help
+	  Enable support for the XDMAC (external DMA controller) on the
+	  UniPhier platform. This DMA controller can transfer data from
+	  memory to memory, memory to peripheral and peripheral to memory.
+
 config XGENE_DMA
 	tristate "APM X-Gene DMA support"
 	depends on ARCH_XGENE || COMPILE_TEST
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index 1d90839..e60f813 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -78,6 +78,7 @@
 obj-$(CONFIG_TEGRA210_ADMA) += tegra210-adma.o
 obj-$(CONFIG_TIMB_DMA) += timb_dma.o
 obj-$(CONFIG_UNIPHIER_MDMAC) += uniphier-mdmac.o
+obj-$(CONFIG_UNIPHIER_XDMAC) += uniphier-xdmac.o
 obj-$(CONFIG_XGENE_DMA) += xgene-dma.o
 obj-$(CONFIG_ZX_DMA) += zx_dma.o
 obj-$(CONFIG_ST_FDMA) += st_fdma.o
diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
index 672c73b..73a2078 100644
--- a/drivers/dma/at_hdmac.c
+++ b/drivers/dma/at_hdmac.c
@@ -146,17 +146,8 @@ static struct at_desc *atc_desc_get(struct at_dma_chan *atchan)
 		"scanned %u descriptors on freelist\n", i);
 
 	/* no more descriptor available in initial pool: create one more */
-	if (!ret) {
-		ret = atc_alloc_descriptor(&atchan->chan_common, GFP_ATOMIC);
-		if (ret) {
-			spin_lock_irqsave(&atchan->lock, flags);
-			atchan->descs_allocated++;
-			spin_unlock_irqrestore(&atchan->lock, flags);
-		} else {
-			dev_err(chan2dev(&atchan->chan_common),
-					"not enough descriptors available\n");
-		}
-	}
+	if (!ret)
+		ret = atc_alloc_descriptor(&atchan->chan_common, GFP_NOWAIT);
 
 	return ret;
 }
@@ -435,17 +426,19 @@ static int atc_get_bytes_left(struct dma_chan *chan, dma_cookie_t cookie)
  * atc_chain_complete - finish work for one transaction chain
  * @atchan: channel we work on
  * @desc: descriptor at the head of the chain we want do complete
- *
- * Called with atchan->lock held and bh disabled */
+ */
 static void
 atc_chain_complete(struct at_dma_chan *atchan, struct at_desc *desc)
 {
 	struct dma_async_tx_descriptor	*txd = &desc->txd;
 	struct at_dma			*atdma = to_at_dma(atchan->chan_common.device);
+	unsigned long flags;
 
 	dev_vdbg(chan2dev(&atchan->chan_common),
 		"descriptor %u complete\n", txd->cookie);
 
+	spin_lock_irqsave(&atchan->lock, flags);
+
 	/* mark the descriptor as complete for non cyclic cases only */
 	if (!atc_chan_is_cyclic(atchan))
 		dma_cookie_complete(txd);
@@ -462,16 +455,13 @@ atc_chain_complete(struct at_dma_chan *atchan, struct at_desc *desc)
 	/* move myself to free_list */
 	list_move(&desc->desc_node, &atchan->free_list);
 
+	spin_unlock_irqrestore(&atchan->lock, flags);
+
 	dma_descriptor_unmap(txd);
 	/* for cyclic transfers,
 	 * no need to replay callback function while stopping */
-	if (!atc_chan_is_cyclic(atchan)) {
-		/*
-		 * The API requires that no submissions are done from a
-		 * callback, so we don't need to drop the lock here
-		 */
+	if (!atc_chan_is_cyclic(atchan))
 		dmaengine_desc_get_callback_invoke(txd, NULL);
-	}
 
 	dma_run_dependencies(txd);
 }
@@ -489,9 +479,12 @@ static void atc_complete_all(struct at_dma_chan *atchan)
 {
 	struct at_desc *desc, *_desc;
 	LIST_HEAD(list);
+	unsigned long flags;
 
 	dev_vdbg(chan2dev(&atchan->chan_common), "complete all\n");
 
+	spin_lock_irqsave(&atchan->lock, flags);
+
 	/*
 	 * Submit queued descriptors ASAP, i.e. before we go through
 	 * the completed ones.
@@ -503,6 +496,8 @@ static void atc_complete_all(struct at_dma_chan *atchan)
 	/* empty queue list by moving descriptors (if any) to active_list */
 	list_splice_init(&atchan->queue, &atchan->active_list);
 
+	spin_unlock_irqrestore(&atchan->lock, flags);
+
 	list_for_each_entry_safe(desc, _desc, &list, desc_node)
 		atc_chain_complete(atchan, desc);
 }
@@ -510,38 +505,44 @@ static void atc_complete_all(struct at_dma_chan *atchan)
 /**
  * atc_advance_work - at the end of a transaction, move forward
  * @atchan: channel where the transaction ended
- *
- * Called with atchan->lock held and bh disabled
  */
 static void atc_advance_work(struct at_dma_chan *atchan)
 {
+	unsigned long flags;
+	int ret;
+
 	dev_vdbg(chan2dev(&atchan->chan_common), "advance_work\n");
 
-	if (atc_chan_is_enabled(atchan))
+	spin_lock_irqsave(&atchan->lock, flags);
+	ret = atc_chan_is_enabled(atchan);
+	spin_unlock_irqrestore(&atchan->lock, flags);
+	if (ret)
 		return;
 
 	if (list_empty(&atchan->active_list) ||
-	    list_is_singular(&atchan->active_list)) {
-		atc_complete_all(atchan);
-	} else {
-		atc_chain_complete(atchan, atc_first_active(atchan));
-		/* advance work */
-		atc_dostart(atchan, atc_first_active(atchan));
-	}
+	    list_is_singular(&atchan->active_list))
+		return atc_complete_all(atchan);
+
+	atc_chain_complete(atchan, atc_first_active(atchan));
+
+	/* advance work */
+	spin_lock_irqsave(&atchan->lock, flags);
+	atc_dostart(atchan, atc_first_active(atchan));
+	spin_unlock_irqrestore(&atchan->lock, flags);
 }
 
 
 /**
  * atc_handle_error - handle errors reported by DMA controller
  * @atchan: channel where error occurs
- *
- * Called with atchan->lock held and bh disabled
  */
 static void atc_handle_error(struct at_dma_chan *atchan)
 {
 	struct at_desc *bad_desc;
 	struct at_desc *child;
+	unsigned long flags;
 
+	spin_lock_irqsave(&atchan->lock, flags);
 	/*
 	 * The descriptor currently at the head of the active list is
 	 * broked. Since we don't have any way to report errors, we'll
@@ -573,6 +574,8 @@ static void atc_handle_error(struct at_dma_chan *atchan)
 	list_for_each_entry(child, &bad_desc->tx_list, desc_node)
 		atc_dump_lli(atchan, &child->lli);
 
+	spin_unlock_irqrestore(&atchan->lock, flags);
+
 	/* Pretend the descriptor completed successfully */
 	atc_chain_complete(atchan, bad_desc);
 }
@@ -580,8 +583,6 @@ static void atc_handle_error(struct at_dma_chan *atchan)
 /**
  * atc_handle_cyclic - at the end of a period, run callback function
  * @atchan: channel used for cyclic operations
- *
- * Called with atchan->lock held and bh disabled
  */
 static void atc_handle_cyclic(struct at_dma_chan *atchan)
 {
@@ -600,17 +601,14 @@ static void atc_handle_cyclic(struct at_dma_chan *atchan)
 static void atc_tasklet(unsigned long data)
 {
 	struct at_dma_chan *atchan = (struct at_dma_chan *)data;
-	unsigned long flags;
 
-	spin_lock_irqsave(&atchan->lock, flags);
 	if (test_and_clear_bit(ATC_IS_ERROR, &atchan->status))
-		atc_handle_error(atchan);
-	else if (atc_chan_is_cyclic(atchan))
-		atc_handle_cyclic(atchan);
-	else
-		atc_advance_work(atchan);
+		return atc_handle_error(atchan);
 
-	spin_unlock_irqrestore(&atchan->lock, flags);
+	if (atc_chan_is_cyclic(atchan))
+		return atc_handle_cyclic(atchan);
+
+	atc_advance_work(atchan);
 }
 
 static irqreturn_t at_dma_interrupt(int irq, void *dev_id)
@@ -940,7 +938,7 @@ atc_prep_dma_memset(struct dma_chan *chan, dma_addr_t dest, int value,
 		return NULL;
 	}
 
-	vaddr = dma_pool_alloc(atdma->memset_pool, GFP_ATOMIC, &paddr);
+	vaddr = dma_pool_alloc(atdma->memset_pool, GFP_NOWAIT, &paddr);
 	if (!vaddr) {
 		dev_err(chan2dev(chan), "%s: couldn't allocate buffer\n",
 			__func__);
@@ -998,7 +996,7 @@ atc_prep_dma_memset_sg(struct dma_chan *chan,
 		return NULL;
 	}
 
-	vaddr = dma_pool_alloc(atdma->memset_pool, GFP_ATOMIC, &paddr);
+	vaddr = dma_pool_alloc(atdma->memset_pool, GFP_NOWAIT, &paddr);
 	if (!vaddr) {
 		dev_err(chan2dev(chan), "%s: couldn't allocate buffer\n",
 			__func__);
@@ -1446,6 +1444,8 @@ static int atc_terminate_all(struct dma_chan *chan)
 	list_splice_init(&atchan->queue, &list);
 	list_splice_init(&atchan->active_list, &list);
 
+	spin_unlock_irqrestore(&atchan->lock, flags);
+
 	/* Flush all pending and queued descriptors */
 	list_for_each_entry_safe(desc, _desc, &list, desc_node)
 		atc_chain_complete(atchan, desc);
@@ -1454,8 +1454,6 @@ static int atc_terminate_all(struct dma_chan *chan)
 	/* if channel dedicated to cyclic operations, free it */
 	clear_bit(ATC_IS_CYCLIC, &atchan->status);
 
-	spin_unlock_irqrestore(&atchan->lock, flags);
-
 	return 0;
 }
 
@@ -1516,7 +1514,6 @@ atc_tx_status(struct dma_chan *chan,
 static void atc_issue_pending(struct dma_chan *chan)
 {
 	struct at_dma_chan	*atchan = to_at_dma_chan(chan);
-	unsigned long		flags;
 
 	dev_vdbg(chan2dev(chan), "issue_pending\n");
 
@@ -1524,15 +1521,12 @@ static void atc_issue_pending(struct dma_chan *chan)
 	if (atc_chan_is_cyclic(atchan))
 		return;
 
-	spin_lock_irqsave(&atchan->lock, flags);
 	atc_advance_work(atchan);
-	spin_unlock_irqrestore(&atchan->lock, flags);
 }
 
 /**
  * atc_alloc_chan_resources - allocate resources for DMA channel
  * @chan: allocate descriptor resources for this channel
- * @client: current client requesting the channel be ready for requests
  *
  * return - the number of allocated descriptors
  */
@@ -1542,10 +1536,8 @@ static int atc_alloc_chan_resources(struct dma_chan *chan)
 	struct at_dma		*atdma = to_at_dma(chan->device);
 	struct at_desc		*desc;
 	struct at_dma_slave	*atslave;
-	unsigned long		flags;
 	int			i;
 	u32			cfg;
-	LIST_HEAD(tmp_list);
 
 	dev_vdbg(chan2dev(chan), "alloc_chan_resources\n");
 
@@ -1555,6 +1547,11 @@ static int atc_alloc_chan_resources(struct dma_chan *chan)
 		return -EIO;
 	}
 
+	if (!list_empty(&atchan->free_list)) {
+		dev_dbg(chan2dev(chan), "can't allocate channel resources (channel not freed from a previous use)\n");
+		return -EIO;
+	}
+
 	cfg = ATC_DEFAULT_CFG;
 
 	atslave = chan->private;
@@ -1570,11 +1567,6 @@ static int atc_alloc_chan_resources(struct dma_chan *chan)
 			cfg = atslave->cfg;
 	}
 
-	/* have we already been set up?
-	 * reconfigure channel but no need to reallocate descriptors */
-	if (!list_empty(&atchan->free_list))
-		return atchan->descs_allocated;
-
 	/* Allocate initial pool of descriptors */
 	for (i = 0; i < init_nr_desc_per_channel; i++) {
 		desc = atc_alloc_descriptor(chan, GFP_KERNEL);
@@ -1583,23 +1575,18 @@ static int atc_alloc_chan_resources(struct dma_chan *chan)
 				"Only %d initial descriptors\n", i);
 			break;
 		}
-		list_add_tail(&desc->desc_node, &tmp_list);
+		list_add_tail(&desc->desc_node, &atchan->free_list);
 	}
 
-	spin_lock_irqsave(&atchan->lock, flags);
-	atchan->descs_allocated = i;
-	list_splice(&tmp_list, &atchan->free_list);
 	dma_cookie_init(chan);
-	spin_unlock_irqrestore(&atchan->lock, flags);
 
 	/* channel parameters */
 	channel_writel(atchan, CFG, cfg);
 
 	dev_dbg(chan2dev(chan),
-		"alloc_chan_resources: allocated %d descriptors\n",
-		atchan->descs_allocated);
+		"alloc_chan_resources: allocated %d descriptors\n", i);
 
-	return atchan->descs_allocated;
+	return i;
 }
 
 /**
@@ -1613,9 +1600,6 @@ static void atc_free_chan_resources(struct dma_chan *chan)
 	struct at_desc		*desc, *_desc;
 	LIST_HEAD(list);
 
-	dev_dbg(chan2dev(chan), "free_chan_resources: (descs allocated=%u)\n",
-		atchan->descs_allocated);
-
 	/* ASSERT:  channel is idle */
 	BUG_ON(!list_empty(&atchan->active_list));
 	BUG_ON(!list_empty(&atchan->queue));
@@ -1628,7 +1612,6 @@ static void atc_free_chan_resources(struct dma_chan *chan)
 		dma_pool_free(atdma->dma_desc_pool, desc, desc->txd.phys);
 	}
 	list_splice_init(&atchan->free_list, &list);
-	atchan->descs_allocated = 0;
 	atchan->status = 0;
 
 	/*
@@ -1671,7 +1654,7 @@ static struct dma_chan *at_dma_xlate(struct of_phandle_args *dma_spec,
 	dma_cap_zero(mask);
 	dma_cap_set(DMA_SLAVE, mask);
 
-	atslave = kzalloc(sizeof(*atslave), GFP_KERNEL);
+	atslave = kmalloc(sizeof(*atslave), GFP_KERNEL);
 	if (!atslave)
 		return NULL;
 
diff --git a/drivers/dma/at_hdmac_regs.h b/drivers/dma/at_hdmac_regs.h
index fe8a585..397692e9 100644
--- a/drivers/dma/at_hdmac_regs.h
+++ b/drivers/dma/at_hdmac_regs.h
@@ -243,7 +243,6 @@ enum atc_status {
  * @active_list: list of descriptors dmaengine is being running on
  * @queue: list of descriptors ready to be submitted to engine
  * @free_list: list of descriptors usable by the channel
- * @descs_allocated: records the actual size of the descriptor pool
  */
 struct at_dma_chan {
 	struct dma_chan		chan_common;
@@ -264,7 +263,6 @@ struct at_dma_chan {
 	struct list_head	active_list;
 	struct list_head	queue;
 	struct list_head	free_list;
-	unsigned int		descs_allocated;
 };
 
 #define	channel_readl(atchan, name) \
diff --git a/drivers/dma/at_xdmac.c b/drivers/dma/at_xdmac.c
index f71c9f7..bb0eaf3 100644
--- a/drivers/dma/at_xdmac.c
+++ b/drivers/dma/at_xdmac.c
@@ -1543,9 +1543,6 @@ static void at_xdmac_remove_xfer(struct at_xdmac_chan *atchan,
 static void at_xdmac_advance_work(struct at_xdmac_chan *atchan)
 {
 	struct at_xdmac_desc	*desc;
-	unsigned long		flags;
-
-	spin_lock_irqsave(&atchan->lock, flags);
 
 	/*
 	 * If channel is enabled, do nothing, advance_work will be triggered
@@ -1559,8 +1556,6 @@ static void at_xdmac_advance_work(struct at_xdmac_chan *atchan)
 		if (!desc->active_xfer)
 			at_xdmac_start_xfer(atchan, desc);
 	}
-
-	spin_unlock_irqrestore(&atchan->lock, flags);
 }
 
 static void at_xdmac_handle_cyclic(struct at_xdmac_chan *atchan)
@@ -1596,7 +1591,7 @@ static void at_xdmac_handle_error(struct at_xdmac_chan *atchan)
 	if (atchan->irq_status & AT_XDMAC_CIS_ROIS)
 		dev_err(chan2dev(&atchan->chan), "request overflow error!!!");
 
-	spin_lock_bh(&atchan->lock);
+	spin_lock_irq(&atchan->lock);
 
 	/* Channel must be disabled first as it's not done automatically */
 	at_xdmac_write(atxdmac, AT_XDMAC_GD, atchan->mask);
@@ -1607,7 +1602,7 @@ static void at_xdmac_handle_error(struct at_xdmac_chan *atchan)
 				    struct at_xdmac_desc,
 				    xfer_node);
 
-	spin_unlock_bh(&atchan->lock);
+	spin_unlock_irq(&atchan->lock);
 
 	/* Print bad descriptor's details if needed */
 	dev_dbg(chan2dev(&atchan->chan),
@@ -1640,31 +1635,31 @@ static void at_xdmac_tasklet(unsigned long data)
 		if (atchan->irq_status & error_mask)
 			at_xdmac_handle_error(atchan);
 
-		spin_lock(&atchan->lock);
+		spin_lock_irq(&atchan->lock);
 		desc = list_first_entry(&atchan->xfers_list,
 					struct at_xdmac_desc,
 					xfer_node);
 		dev_vdbg(chan2dev(&atchan->chan), "%s: desc 0x%p\n", __func__, desc);
 		if (!desc->active_xfer) {
 			dev_err(chan2dev(&atchan->chan), "Xfer not active: exiting");
-			spin_unlock(&atchan->lock);
+			spin_unlock_irq(&atchan->lock);
 			return;
 		}
 
 		txd = &desc->tx_dma_desc;
 
 		at_xdmac_remove_xfer(atchan, desc);
-		spin_unlock(&atchan->lock);
+		spin_unlock_irq(&atchan->lock);
 
-		if (!at_xdmac_chan_is_cyclic(atchan)) {
-			dma_cookie_complete(txd);
-			if (txd->flags & DMA_PREP_INTERRUPT)
-				dmaengine_desc_get_callback_invoke(txd, NULL);
-		}
+		dma_cookie_complete(txd);
+		if (txd->flags & DMA_PREP_INTERRUPT)
+			dmaengine_desc_get_callback_invoke(txd, NULL);
 
 		dma_run_dependencies(txd);
 
+		spin_lock_irq(&atchan->lock);
 		at_xdmac_advance_work(atchan);
+		spin_unlock_irq(&atchan->lock);
 	}
 }
 
@@ -1725,11 +1720,15 @@ static irqreturn_t at_xdmac_interrupt(int irq, void *dev_id)
 static void at_xdmac_issue_pending(struct dma_chan *chan)
 {
 	struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan);
+	unsigned long flags;
 
 	dev_dbg(chan2dev(&atchan->chan), "%s\n", __func__);
 
-	if (!at_xdmac_chan_is_cyclic(atchan))
+	if (!at_xdmac_chan_is_cyclic(atchan)) {
+		spin_lock_irqsave(&atchan->lock, flags);
 		at_xdmac_advance_work(atchan);
+		spin_unlock_irqrestore(&atchan->lock, flags);
+	}
 
 	return;
 }
@@ -1822,26 +1821,21 @@ static int at_xdmac_alloc_chan_resources(struct dma_chan *chan)
 	struct at_xdmac_chan	*atchan = to_at_xdmac_chan(chan);
 	struct at_xdmac_desc	*desc;
 	int			i;
-	unsigned long		flags;
-
-	spin_lock_irqsave(&atchan->lock, flags);
 
 	if (at_xdmac_chan_is_enabled(atchan)) {
 		dev_err(chan2dev(chan),
 			"can't allocate channel resources (channel enabled)\n");
-		i = -EIO;
-		goto spin_unlock;
+		return -EIO;
 	}
 
 	if (!list_empty(&atchan->free_descs_list)) {
 		dev_err(chan2dev(chan),
 			"can't allocate channel resources (channel not free from a previous use)\n");
-		i = -EIO;
-		goto spin_unlock;
+		return -EIO;
 	}
 
 	for (i = 0; i < init_nr_desc_per_channel; i++) {
-		desc = at_xdmac_alloc_desc(chan, GFP_ATOMIC);
+		desc = at_xdmac_alloc_desc(chan, GFP_KERNEL);
 		if (!desc) {
 			dev_warn(chan2dev(chan),
 				"only %d descriptors have been allocated\n", i);
@@ -1854,8 +1848,6 @@ static int at_xdmac_alloc_chan_resources(struct dma_chan *chan)
 
 	dev_dbg(chan2dev(chan), "%s: allocated %d descriptors\n", __func__, i);
 
-spin_unlock:
-	spin_unlock_irqrestore(&atchan->lock, flags);
 	return i;
 }
 
diff --git a/drivers/dma/bcm-sba-raid.c b/drivers/dma/bcm-sba-raid.c
index 275e90f..64239da 100644
--- a/drivers/dma/bcm-sba-raid.c
+++ b/drivers/dma/bcm-sba-raid.c
@@ -120,7 +120,7 @@ struct sba_request {
 	struct brcm_message msg;
 	struct dma_async_tx_descriptor tx;
 	/* SBA commands */
-	struct brcm_sba_command cmds[0];
+	struct brcm_sba_command cmds[];
 };
 
 enum sba_version {
diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
index 17909fd..4830ba6 100644
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -58,6 +58,87 @@ static DEFINE_IDA(dma_ida);
 static LIST_HEAD(dma_device_list);
 static long dmaengine_ref_count;
 
+/* --- debugfs implementation --- */
+#ifdef CONFIG_DEBUG_FS
+#include <linux/debugfs.h>
+
+static struct dentry *rootdir;
+
+static void dmaengine_debug_register(struct dma_device *dma_dev)
+{
+	dma_dev->dbg_dev_root = debugfs_create_dir(dev_name(dma_dev->dev),
+						   rootdir);
+	if (IS_ERR(dma_dev->dbg_dev_root))
+		dma_dev->dbg_dev_root = NULL;
+}
+
+static void dmaengine_debug_unregister(struct dma_device *dma_dev)
+{
+	debugfs_remove_recursive(dma_dev->dbg_dev_root);
+	dma_dev->dbg_dev_root = NULL;
+}
+
+static void dmaengine_dbg_summary_show(struct seq_file *s,
+				       struct dma_device *dma_dev)
+{
+	struct dma_chan *chan;
+
+	list_for_each_entry(chan, &dma_dev->channels, device_node) {
+		if (chan->client_count) {
+			seq_printf(s, " %-13s| %s", dma_chan_name(chan),
+				   chan->dbg_client_name ?: "in-use");
+
+			if (chan->router)
+				seq_printf(s, " (via router: %s)\n",
+					dev_name(chan->router->dev));
+			else
+				seq_puts(s, "\n");
+		}
+	}
+}
+
+static int dmaengine_summary_show(struct seq_file *s, void *data)
+{
+	struct dma_device *dma_dev = NULL;
+
+	mutex_lock(&dma_list_mutex);
+	list_for_each_entry(dma_dev, &dma_device_list, global_node) {
+		seq_printf(s, "dma%d (%s): number of channels: %u\n",
+			   dma_dev->dev_id, dev_name(dma_dev->dev),
+			   dma_dev->chancnt);
+
+		if (dma_dev->dbg_summary_show)
+			dma_dev->dbg_summary_show(s, dma_dev);
+		else
+			dmaengine_dbg_summary_show(s, dma_dev);
+
+		if (!list_is_last(&dma_dev->global_node, &dma_device_list))
+			seq_puts(s, "\n");
+	}
+	mutex_unlock(&dma_list_mutex);
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(dmaengine_summary);
+
+static void __init dmaengine_debugfs_init(void)
+{
+	rootdir = debugfs_create_dir("dmaengine", NULL);
+
+	/* /sys/kernel/debug/dmaengine/summary */
+	debugfs_create_file("summary", 0444, rootdir, NULL,
+			    &dmaengine_summary_fops);
+}
+#else
+static inline void dmaengine_debugfs_init(void) { }
+static inline int dmaengine_debug_register(struct dma_device *dma_dev)
+{
+	return 0;
+}
+
+static inline void dmaengine_debug_unregister(struct dma_device *dma_dev) { }
+#endif	/* DEBUG_FS */
+
 /* --- sysfs implementation --- */
 
 #define DMA_SLAVE_NAME	"slave"
@@ -760,6 +841,11 @@ struct dma_chan *dma_request_chan(struct device *dev, const char *name)
 		return chan ? chan : ERR_PTR(-EPROBE_DEFER);
 
 found:
+#ifdef CONFIG_DEBUG_FS
+	chan->dbg_client_name = kasprintf(GFP_KERNEL, "%s:%s", dev_name(dev),
+					  name);
+#endif
+
 	chan->name = kasprintf(GFP_KERNEL, "dma:%s", name);
 	if (!chan->name)
 		return chan;
@@ -837,6 +923,11 @@ void dma_release_channel(struct dma_chan *chan)
 		chan->name = NULL;
 		chan->slave = NULL;
 	}
+
+#ifdef CONFIG_DEBUG_FS
+	kfree(chan->dbg_client_name);
+	chan->dbg_client_name = NULL;
+#endif
 	mutex_unlock(&dma_list_mutex);
 }
 EXPORT_SYMBOL_GPL(dma_release_channel);
@@ -1196,6 +1287,8 @@ int dma_async_device_register(struct dma_device *device)
 	dma_channel_rebalance();
 	mutex_unlock(&dma_list_mutex);
 
+	dmaengine_debug_register(device);
+
 	return 0;
 
 err_out:
@@ -1229,6 +1322,8 @@ void dma_async_device_unregister(struct dma_device *device)
 {
 	struct dma_chan *chan, *n;
 
+	dmaengine_debug_unregister(device);
+
 	list_for_each_entry_safe(chan, n, &device->channels, device_node)
 		__dma_async_device_channel_unregister(device, chan);
 
@@ -1559,6 +1654,11 @@ static int __init dma_bus_init(void)
 
 	if (err)
 		return err;
-	return class_register(&dma_devclass);
+
+	err = class_register(&dma_devclass);
+	if (!err)
+		dmaengine_debugfs_init();
+
+	return err;
 }
 arch_initcall(dma_bus_init);
diff --git a/drivers/dma/dmaengine.h b/drivers/dma/dmaengine.h
index e8a320c..1bfbd64 100644
--- a/drivers/dma/dmaengine.h
+++ b/drivers/dma/dmaengine.h
@@ -182,4 +182,20 @@ dmaengine_desc_callback_valid(struct dmaengine_desc_callback *cb)
 struct dma_chan *dma_get_slave_channel(struct dma_chan *chan);
 struct dma_chan *dma_get_any_slave_channel(struct dma_device *device);
 
+#ifdef CONFIG_DEBUG_FS
+#include <linux/debugfs.h>
+
+static inline struct dentry *
+dmaengine_get_debugfs_root(struct dma_device *dma_dev) {
+	return dma_dev->dbg_dev_root;
+}
+#else
+struct dentry;
+static inline struct dentry *
+dmaengine_get_debugfs_root(struct dma_device *dma_dev)
+{
+	return NULL;
+}
+#endif /* CONFIG_DEBUG_FS */
+
 #endif
diff --git a/drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.c b/drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.c
index c70a796..4ec909e 100644
--- a/drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.c
+++ b/drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.c
@@ -790,6 +790,20 @@ static int dpaa2_qdma_remove(struct fsl_mc_device *ls_dev)
 	return 0;
 }
 
+static void dpaa2_qdma_shutdown(struct fsl_mc_device *ls_dev)
+{
+	struct dpaa2_qdma_priv *priv;
+	struct device *dev;
+
+	dev = &ls_dev->dev;
+	priv = dev_get_drvdata(dev);
+
+	dpdmai_disable(priv->mc_io, 0, ls_dev->mc_handle);
+	dpaa2_dpdmai_dpio_unbind(priv);
+	dpdmai_close(priv->mc_io, 0, ls_dev->mc_handle);
+	dpdmai_destroy(priv->mc_io, 0, ls_dev->mc_handle);
+}
+
 static const struct fsl_mc_device_id dpaa2_qdma_id_table[] = {
 	{
 		.vendor = FSL_MC_VENDOR_FREESCALE,
@@ -805,6 +819,7 @@ static struct fsl_mc_driver dpaa2_qdma_driver = {
 	},
 	.probe          = dpaa2_qdma_probe,
 	.remove		= dpaa2_qdma_remove,
+	.shutdown	= dpaa2_qdma_shutdown,
 	.match_id_table	= dpaa2_qdma_id_table
 };
 
diff --git a/drivers/dma/fsl-dpaa2-qdma/dpdmai.c b/drivers/dma/fsl-dpaa2-qdma/dpdmai.c
index f8d2211..878662a 100644
--- a/drivers/dma/fsl-dpaa2-qdma/dpdmai.c
+++ b/drivers/dma/fsl-dpaa2-qdma/dpdmai.c
@@ -160,6 +160,27 @@ int dpdmai_create(struct fsl_mc_io *mc_io, u32 cmd_flags,
 }
 
 /**
+ * dpdmai_destroy() - Destroy the DPDMAI object and release all its resources.
+ * @mc_io:      Pointer to MC portal's I/O object
+ * @cmd_flags:  Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token:      Token of DPDMAI object
+ *
+ * Return:      '0' on Success; error code otherwise.
+ */
+int dpdmai_destroy(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token)
+{
+	struct fsl_mc_command cmd = { 0 };
+
+	/* prepare command */
+	cmd.header = mc_encode_cmd_header(DPDMAI_CMDID_DESTROY,
+					  cmd_flags, token);
+
+	/* send command to mc*/
+	return mc_send_command(mc_io, &cmd);
+}
+EXPORT_SYMBOL_GPL(dpdmai_destroy);
+
+/**
  * dpdmai_enable() - Enable the DPDMAI, allow sending and receiving frames.
  * @mc_io:	Pointer to MC portal's I/O object
  * @cmd_flags:	Command flags; one or more of 'MC_CMD_FLAG_'
diff --git a/drivers/dma/fsl-dpaa2-qdma/dpdmai.h b/drivers/dma/fsl-dpaa2-qdma/dpdmai.h
index 6d78509..b13b9bf 100644
--- a/drivers/dma/fsl-dpaa2-qdma/dpdmai.h
+++ b/drivers/dma/fsl-dpaa2-qdma/dpdmai.h
@@ -18,6 +18,7 @@
 #define DPDMAI_CMDID_CLOSE		DPDMAI_CMDID_FORMAT(0x800)
 #define DPDMAI_CMDID_OPEN               DPDMAI_CMDID_FORMAT(0x80E)
 #define DPDMAI_CMDID_CREATE             DPDMAI_CMDID_FORMAT(0x90E)
+#define DPDMAI_CMDID_DESTROY            DPDMAI_CMDID_FORMAT(0x900)
 
 #define DPDMAI_CMDID_ENABLE             DPDMAI_CMDID_FORMAT(0x002)
 #define DPDMAI_CMDID_DISABLE            DPDMAI_CMDID_FORMAT(0x003)
@@ -160,6 +161,7 @@ struct dpdmai_rx_queue_attr {
 int dpdmai_open(struct fsl_mc_io *mc_io, u32 cmd_flags,
 		int dpdmai_id, u16 *token);
 int dpdmai_close(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token);
+int dpdmai_destroy(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token);
 int dpdmai_create(struct fsl_mc_io *mc_io, u32 cmd_flags,
 		  const struct dpdmai_cfg *cfg, u16 *token);
 int dpdmai_enable(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token);
diff --git a/drivers/dma/idxd/cdev.c b/drivers/dma/idxd/cdev.c
index 989b7a2..ff49847e 100644
--- a/drivers/dma/idxd/cdev.c
+++ b/drivers/dma/idxd/cdev.c
@@ -74,12 +74,10 @@ static int idxd_cdev_open(struct inode *inode, struct file *filp)
 	struct idxd_device *idxd;
 	struct idxd_wq *wq;
 	struct device *dev;
-	struct idxd_cdev *idxd_cdev;
 
 	wq = inode_wq(inode);
 	idxd = wq->idxd;
 	dev = &idxd->pdev->dev;
-	idxd_cdev = &wq->idxd_cdev;
 
 	dev_dbg(dev, "%s called: %d\n", __func__, idxd_wq_refcount(wq));
 
@@ -139,6 +137,8 @@ static int idxd_cdev_mmap(struct file *filp, struct vm_area_struct *vma)
 
 	dev_dbg(&pdev->dev, "%s called\n", __func__);
 	rc = check_vma(wq, vma, __func__);
+	if (rc < 0)
+		return rc;
 
 	vma->vm_flags |= VM_DONTCOPY;
 	pfn = (base + idxd_get_wq_portal_full_offset(wq->id,
diff --git a/drivers/dma/idxd/device.c b/drivers/dma/idxd/device.c
index ada69e7..f6f49f0 100644
--- a/drivers/dma/idxd/device.c
+++ b/drivers/dma/idxd/device.c
@@ -584,11 +584,11 @@ static void idxd_group_flags_setup(struct idxd_device *idxd)
 		struct idxd_group *group = &idxd->groups[i];
 
 		if (group->tc_a == -1)
-			group->grpcfg.flags.tc_a = 0;
+			group->tc_a = group->grpcfg.flags.tc_a = 0;
 		else
 			group->grpcfg.flags.tc_a = group->tc_a;
 		if (group->tc_b == -1)
-			group->grpcfg.flags.tc_b = 1;
+			group->tc_b = group->grpcfg.flags.tc_b = 1;
 		else
 			group->grpcfg.flags.tc_b = group->tc_b;
 		group->grpcfg.flags.use_token_limit = group->use_token_limit;
diff --git a/drivers/dma/idxd/sysfs.c b/drivers/dma/idxd/sysfs.c
index 6ca6e52..3999827 100644
--- a/drivers/dma/idxd/sysfs.c
+++ b/drivers/dma/idxd/sysfs.c
@@ -419,7 +419,7 @@ static ssize_t engine_group_id_store(struct device *dev,
 	struct idxd_device *idxd = engine->idxd;
 	long id;
 	int rc;
-	struct idxd_group *prevg, *group;
+	struct idxd_group *prevg;
 
 	rc = kstrtol(buf, 10, &id);
 	if (rc < 0)
@@ -439,7 +439,6 @@ static ssize_t engine_group_id_store(struct device *dev,
 		return count;
 	}
 
-	group = &idxd->groups[id];
 	prevg = engine->group;
 
 	if (prevg)
@@ -513,9 +512,6 @@ static ssize_t group_tokens_reserved_store(struct device *dev,
 	if (idxd->state == IDXD_DEV_ENABLED)
 		return -EPERM;
 
-	if (idxd->token_limit == 0)
-		return -EPERM;
-
 	if (val > idxd->max_tokens)
 		return -EINVAL;
 
@@ -561,8 +557,6 @@ static ssize_t group_tokens_allowed_store(struct device *dev,
 	if (idxd->state == IDXD_DEV_ENABLED)
 		return -EPERM;
 
-	if (idxd->token_limit == 0)
-		return -EPERM;
 	if (val < 4 * group->num_engines ||
 	    val > group->tokens_reserved + idxd->nr_tokens)
 		return -EINVAL;
@@ -1180,6 +1174,16 @@ static ssize_t op_cap_show(struct device *dev,
 }
 static DEVICE_ATTR_RO(op_cap);
 
+static ssize_t gen_cap_show(struct device *dev,
+			    struct device_attribute *attr, char *buf)
+{
+	struct idxd_device *idxd =
+		container_of(dev, struct idxd_device, conf_dev);
+
+	return sprintf(buf, "%#llx\n", idxd->hw.gen_cap.bits);
+}
+static DEVICE_ATTR_RO(gen_cap);
+
 static ssize_t configurable_show(struct device *dev,
 				 struct device_attribute *attr, char *buf)
 {
@@ -1317,6 +1321,7 @@ static struct attribute *idxd_device_attributes[] = {
 	&dev_attr_max_batch_size.attr,
 	&dev_attr_max_transfer_size.attr,
 	&dev_attr_op_cap.attr,
+	&dev_attr_gen_cap.attr,
 	&dev_attr_configurable.attr,
 	&dev_attr_clients.attr,
 	&dev_attr_state.attr,
diff --git a/drivers/dma/ioat/dca.c b/drivers/dma/ioat/dca.c
index be61c32..0be3855 100644
--- a/drivers/dma/ioat/dca.c
+++ b/drivers/dma/ioat/dca.c
@@ -102,7 +102,7 @@ struct ioat_dca_priv {
 	int			 max_requesters;
 	int			 requester_count;
 	u8			 tag_map[IOAT_TAG_MAP_LEN];
-	struct ioat_dca_slot 	 req_slots[0];
+	struct ioat_dca_slot	 req_slots[];
 };
 
 static int ioat_dca_dev_managed(struct dca_provider *dca,
diff --git a/drivers/dma/ppc4xx/adma.c b/drivers/dma/ppc4xx/adma.c
index fbabd2e..4db000d 100644
--- a/drivers/dma/ppc4xx/adma.c
+++ b/drivers/dma/ppc4xx/adma.c
@@ -4303,7 +4303,7 @@ static ssize_t devices_show(struct device_driver *dev, char *buf)
 	for (i = 0; i < PPC440SPE_ADMA_ENGINES_NUM; i++) {
 		if (ppc440spe_adma_devices[i] == -1)
 			continue;
-		size += snprintf(buf + size, PAGE_SIZE - size,
+		size += scnprintf(buf + size, PAGE_SIZE - size,
 				 "PPC440SP(E)-ADMA.%d: %s\n", i,
 				 ppc_adma_errors[ppc440spe_adma_devices[i]]);
 	}
diff --git a/drivers/dma/sa11x0-dma.c b/drivers/dma/sa11x0-dma.c
index afb6805..0fa7f14 100644
--- a/drivers/dma/sa11x0-dma.c
+++ b/drivers/dma/sa11x0-dma.c
@@ -78,7 +78,7 @@ struct sa11x0_dma_desc {
 	bool			cyclic;
 
 	unsigned		sglen;
-	struct sa11x0_dma_sg	sg[0];
+	struct sa11x0_dma_sg	sg[];
 };
 
 struct sa11x0_dma_phy;
diff --git a/drivers/dma/sh/rcar-dmac.c b/drivers/dma/sh/rcar-dmac.c
index f06016d..59b36ab 100644
--- a/drivers/dma/sh/rcar-dmac.c
+++ b/drivers/dma/sh/rcar-dmac.c
@@ -1219,7 +1219,7 @@ rcar_dmac_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t buf_addr,
 	sg_len = buf_len / period_len;
 	if (sg_len > RCAR_DMAC_MAX_SG_LEN) {
 		dev_err(chan->device->dev,
-			"chan%u: sg length %d exceds limit %d",
+			"chan%u: sg length %d exceeds limit %d",
 			rchan->index, sg_len, RCAR_DMAC_MAX_SG_LEN);
 		return NULL;
 	}
diff --git a/drivers/dma/sh/shdma-base.c b/drivers/dma/sh/shdma-base.c
index c51de49..2deeaab 100644
--- a/drivers/dma/sh/shdma-base.c
+++ b/drivers/dma/sh/shdma-base.c
@@ -709,7 +709,7 @@ static struct dma_async_tx_descriptor *shdma_prep_dma_cyclic(
 	BUG_ON(!schan->desc_num);
 
 	if (sg_len > SHDMA_MAX_SG_LEN) {
-		dev_err(schan->dev, "sg length %d exceds limit %d",
+		dev_err(schan->dev, "sg length %d exceeds limit %d",
 				sg_len, SHDMA_MAX_SG_LEN);
 		return NULL;
 	}
diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c
index 9a31a315..0ef5ca8 100644
--- a/drivers/dma/sprd-dma.c
+++ b/drivers/dma/sprd-dma.c
@@ -212,7 +212,7 @@ struct sprd_dma_dev {
 	struct clk		*ashb_clk;
 	int			irq;
 	u32			total_chns;
-	struct sprd_dma_chn	channels[0];
+	struct sprd_dma_chn	channels[];
 };
 
 static void sprd_dma_free_desc(struct virt_dma_desc *vd);
@@ -486,6 +486,28 @@ static int sprd_dma_set_2stage_config(struct sprd_dma_chn *schan)
 	return 0;
 }
 
+static void sprd_dma_set_pending(struct sprd_dma_chn *schan, bool enable)
+{
+	struct sprd_dma_dev *sdev = to_sprd_dma_dev(&schan->vc.chan);
+	u32 reg, val, req_id;
+
+	if (schan->dev_id == SPRD_DMA_SOFTWARE_UID)
+		return;
+
+	/* The DMA request id always starts from 0. */
+	req_id = schan->dev_id - 1;
+
+	if (req_id < 32) {
+		reg = SPRD_DMA_GLB_REQ_PEND0_EN;
+		val = BIT(req_id);
+	} else {
+		reg = SPRD_DMA_GLB_REQ_PEND1_EN;
+		val = BIT(req_id - 32);
+	}
+
+	sprd_dma_glb_update(sdev, reg, val, enable ? val : 0);
+}
+
 static void sprd_dma_set_chn_config(struct sprd_dma_chn *schan,
 				    struct sprd_dma_desc *sdesc)
 {
@@ -532,6 +554,7 @@ static void sprd_dma_start(struct sprd_dma_chn *schan)
 	 */
 	sprd_dma_set_chn_config(schan, schan->cur_desc);
 	sprd_dma_set_uid(schan);
+	sprd_dma_set_pending(schan, true);
 	sprd_dma_enable_chn(schan);
 
 	if (schan->dev_id == SPRD_DMA_SOFTWARE_UID &&
@@ -543,6 +566,7 @@ static void sprd_dma_start(struct sprd_dma_chn *schan)
 static void sprd_dma_stop(struct sprd_dma_chn *schan)
 {
 	sprd_dma_stop_and_disable(schan);
+	sprd_dma_set_pending(schan, false);
 	sprd_dma_unset_uid(schan);
 	sprd_dma_clear_int(schan);
 	schan->cur_desc = NULL;
diff --git a/drivers/dma/stm32-dma.c b/drivers/dma/stm32-dma.c
index 5989b08..0ddbaa4 100644
--- a/drivers/dma/stm32-dma.c
+++ b/drivers/dma/stm32-dma.c
@@ -15,6 +15,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/err.h>
 #include <linux/init.h>
+#include <linux/iopoll.h>
 #include <linux/jiffies.h>
 #include <linux/list.h>
 #include <linux/module.h>
@@ -207,7 +208,6 @@ struct stm32_dma_device {
 	struct dma_device ddev;
 	void __iomem *base;
 	struct clk *clk;
-	struct reset_control *rst;
 	bool mem2mem;
 	struct stm32_dma_chan chan[STM32_DMA_MAX_CHANNELS];
 };
@@ -422,29 +422,19 @@ static void stm32_dma_irq_clear(struct stm32_dma_chan *chan, u32 flags)
 static int stm32_dma_disable_chan(struct stm32_dma_chan *chan)
 {
 	struct stm32_dma_device *dmadev = stm32_dma_get_dev(chan);
-	unsigned long timeout = jiffies + msecs_to_jiffies(5000);
-	u32 dma_scr, id;
+	u32 dma_scr, id, reg;
 
 	id = chan->id;
-	dma_scr = stm32_dma_read(dmadev, STM32_DMA_SCR(id));
+	reg = STM32_DMA_SCR(id);
+	dma_scr = stm32_dma_read(dmadev, reg);
 
 	if (dma_scr & STM32_DMA_SCR_EN) {
 		dma_scr &= ~STM32_DMA_SCR_EN;
-		stm32_dma_write(dmadev, STM32_DMA_SCR(id), dma_scr);
+		stm32_dma_write(dmadev, reg, dma_scr);
 
-		do {
-			dma_scr = stm32_dma_read(dmadev, STM32_DMA_SCR(id));
-			dma_scr &= STM32_DMA_SCR_EN;
-			if (!dma_scr)
-				break;
-
-			if (time_after_eq(jiffies, timeout)) {
-				dev_err(chan2dev(chan), "%s: timeout!\n",
-					__func__);
-				return -EBUSY;
-			}
-			cond_resched();
-		} while (1);
+		return readl_relaxed_poll_timeout_atomic(dmadev->base + reg,
+					dma_scr, !(dma_scr & STM32_DMA_SCR_EN),
+					10, 1000000);
 	}
 
 	return 0;
@@ -488,8 +478,10 @@ static int stm32_dma_terminate_all(struct dma_chan *c)
 
 	spin_lock_irqsave(&chan->vchan.lock, flags);
 
-	if (chan->busy) {
-		stm32_dma_stop(chan);
+	if (chan->desc) {
+		vchan_terminate_vdesc(&chan->desc->vdesc);
+		if (chan->busy)
+			stm32_dma_stop(chan);
 		chan->desc = NULL;
 	}
 
@@ -545,6 +537,8 @@ static void stm32_dma_start_transfer(struct stm32_dma_chan *chan)
 		if (!vdesc)
 			return;
 
+		list_del(&vdesc->node);
+
 		chan->desc = to_stm32_dma_desc(vdesc);
 		chan->next_sg = 0;
 	}
@@ -555,6 +549,7 @@ static void stm32_dma_start_transfer(struct stm32_dma_chan *chan)
 	sg_req = &chan->desc->sg_req[chan->next_sg];
 	reg = &sg_req->chan_reg;
 
+	reg->dma_scr &= ~STM32_DMA_SCR_EN;
 	stm32_dma_write(dmadev, STM32_DMA_SCR(chan->id), reg->dma_scr);
 	stm32_dma_write(dmadev, STM32_DMA_SPAR(chan->id), reg->dma_spar);
 	stm32_dma_write(dmadev, STM32_DMA_SM0AR(chan->id), reg->dma_sm0ar);
@@ -622,7 +617,6 @@ static void stm32_dma_handle_chan_done(struct stm32_dma_chan *chan)
 		} else {
 			chan->busy = false;
 			if (chan->next_sg == chan->desc->num_sgs) {
-				list_del(&chan->desc->vdesc.node);
 				vchan_cookie_complete(&chan->desc->vdesc);
 				chan->desc = NULL;
 			}
@@ -1275,6 +1269,7 @@ static int stm32_dma_probe(struct platform_device *pdev)
 	struct dma_device *dd;
 	const struct of_device_id *match;
 	struct resource *res;
+	struct reset_control *rst;
 	int i, ret;
 
 	match = of_match_device(stm32_dma_of_match, &pdev->dev);
@@ -1296,8 +1291,10 @@ static int stm32_dma_probe(struct platform_device *pdev)
 
 	dmadev->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(dmadev->clk)) {
-		dev_err(&pdev->dev, "Error: Missing controller clock\n");
-		return PTR_ERR(dmadev->clk);
+		ret = PTR_ERR(dmadev->clk);
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Can't get clock\n");
+		return ret;
 	}
 
 	ret = clk_prepare_enable(dmadev->clk);
@@ -1309,13 +1306,19 @@ static int stm32_dma_probe(struct platform_device *pdev)
 	dmadev->mem2mem = of_property_read_bool(pdev->dev.of_node,
 						"st,mem2mem");
 
-	dmadev->rst = devm_reset_control_get(&pdev->dev, NULL);
-	if (!IS_ERR(dmadev->rst)) {
-		reset_control_assert(dmadev->rst);
+	rst = devm_reset_control_get(&pdev->dev, NULL);
+	if (IS_ERR(rst)) {
+		ret = PTR_ERR(rst);
+		if (ret == -EPROBE_DEFER)
+			goto clk_free;
+	} else {
+		reset_control_assert(rst);
 		udelay(2);
-		reset_control_deassert(dmadev->rst);
+		reset_control_deassert(rst);
 	}
 
+	dma_set_max_seg_size(&pdev->dev, STM32_DMA_ALIGNED_MAX_DATA_ITEMS);
+
 	dma_cap_set(DMA_SLAVE, dd->cap_mask);
 	dma_cap_set(DMA_PRIVATE, dd->cap_mask);
 	dma_cap_set(DMA_CYCLIC, dd->cap_mask);
@@ -1336,7 +1339,9 @@ static int stm32_dma_probe(struct platform_device *pdev)
 		BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
 	dd->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
 	dd->residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
+	dd->copy_align = DMAENGINE_ALIGN_32_BYTES;
 	dd->max_burst = STM32_DMA_MAX_BURST;
+	dd->descriptor_reuse = true;
 	dd->dev = &pdev->dev;
 	INIT_LIST_HEAD(&dd->channels);
 
@@ -1427,7 +1432,39 @@ static int stm32_dma_runtime_resume(struct device *dev)
 }
 #endif
 
+#ifdef CONFIG_PM_SLEEP
+static int stm32_dma_suspend(struct device *dev)
+{
+	struct stm32_dma_device *dmadev = dev_get_drvdata(dev);
+	int id, ret, scr;
+
+	ret = pm_runtime_get_sync(dev);
+	if (ret < 0)
+		return ret;
+
+	for (id = 0; id < STM32_DMA_MAX_CHANNELS; id++) {
+		scr = stm32_dma_read(dmadev, STM32_DMA_SCR(id));
+		if (scr & STM32_DMA_SCR_EN) {
+			dev_warn(dev, "Suspend is prevented by Chan %i\n", id);
+			return -EBUSY;
+		}
+	}
+
+	pm_runtime_put_sync(dev);
+
+	pm_runtime_force_suspend(dev);
+
+	return 0;
+}
+
+static int stm32_dma_resume(struct device *dev)
+{
+	return pm_runtime_force_resume(dev);
+}
+#endif
+
 static const struct dev_pm_ops stm32_dma_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(stm32_dma_suspend, stm32_dma_resume)
 	SET_RUNTIME_PM_OPS(stm32_dma_runtime_suspend,
 			   stm32_dma_runtime_resume, NULL)
 };
@@ -1438,10 +1475,11 @@ static struct platform_driver stm32_dma_driver = {
 		.of_match_table = stm32_dma_of_match,
 		.pm = &stm32_dma_pm_ops,
 	},
+	.probe = stm32_dma_probe,
 };
 
 static int __init stm32_dma_init(void)
 {
-	return platform_driver_probe(&stm32_dma_driver, stm32_dma_probe);
+	return platform_driver_register(&stm32_dma_driver);
 }
 subsys_initcall(stm32_dma_init);
diff --git a/drivers/dma/stm32-dmamux.c b/drivers/dma/stm32-dmamux.c
index 3c89bd3..12f7637 100644
--- a/drivers/dma/stm32-dmamux.c
+++ b/drivers/dma/stm32-dmamux.c
@@ -35,12 +35,14 @@ struct stm32_dmamux {
 struct stm32_dmamux_data {
 	struct dma_router dmarouter;
 	struct clk *clk;
-	struct reset_control *rst;
 	void __iomem *iomem;
 	u32 dma_requests; /* Number of DMA requests connected to DMAMUX */
 	u32 dmamux_requests; /* Number of DMA requests routed toward DMAs */
 	spinlock_t lock; /* Protects register access */
 	unsigned long *dma_inuse; /* Used DMA channel */
+	u32 ccr[STM32_DMAMUX_MAX_DMA_REQUESTS]; /* Used to backup CCR register
+						 * in suspend
+						 */
 	u32 dma_reqs[]; /* Number of DMA Request per DMA masters.
 			 *  [0] holds number of DMA Masters.
 			 *  To be kept at very end end of this structure
@@ -179,6 +181,7 @@ static int stm32_dmamux_probe(struct platform_device *pdev)
 	struct stm32_dmamux_data *stm32_dmamux;
 	struct resource *res;
 	void __iomem *iomem;
+	struct reset_control *rst;
 	int i, count, ret;
 	u32 dma_req;
 
@@ -251,16 +254,26 @@ static int stm32_dmamux_probe(struct platform_device *pdev)
 	stm32_dmamux->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(stm32_dmamux->clk)) {
 		ret = PTR_ERR(stm32_dmamux->clk);
-		if (ret == -EPROBE_DEFER)
-			dev_info(&pdev->dev, "Missing controller clock\n");
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Missing clock controller\n");
 		return ret;
 	}
 
-	stm32_dmamux->rst = devm_reset_control_get(&pdev->dev, NULL);
-	if (!IS_ERR(stm32_dmamux->rst)) {
-		reset_control_assert(stm32_dmamux->rst);
+	ret = clk_prepare_enable(stm32_dmamux->clk);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "clk_prep_enable error: %d\n", ret);
+		return ret;
+	}
+
+	rst = devm_reset_control_get(&pdev->dev, NULL);
+	if (IS_ERR(rst)) {
+		ret = PTR_ERR(rst);
+		if (ret == -EPROBE_DEFER)
+			goto err_clk;
+	} else {
+		reset_control_assert(rst);
 		udelay(2);
-		reset_control_deassert(stm32_dmamux->rst);
+		reset_control_deassert(rst);
 	}
 
 	stm32_dmamux->iomem = iomem;
@@ -271,14 +284,6 @@ static int stm32_dmamux_probe(struct platform_device *pdev)
 	pm_runtime_set_active(&pdev->dev);
 	pm_runtime_enable(&pdev->dev);
 
-	if (!IS_ERR(stm32_dmamux->clk)) {
-		ret = clk_prepare_enable(stm32_dmamux->clk);
-		if (ret < 0) {
-			dev_err(&pdev->dev, "clk_prep_enable error: %d\n", ret);
-			return ret;
-		}
-	}
-
 	pm_runtime_get_noresume(&pdev->dev);
 
 	/* Reset the dmamux */
@@ -287,8 +292,17 @@ static int stm32_dmamux_probe(struct platform_device *pdev)
 
 	pm_runtime_put(&pdev->dev);
 
-	return of_dma_router_register(node, stm32_dmamux_route_allocate,
+	ret = of_dma_router_register(node, stm32_dmamux_route_allocate,
 				     &stm32_dmamux->dmarouter);
+	if (ret)
+		goto err_clk;
+
+	return 0;
+
+err_clk:
+	clk_disable_unprepare(stm32_dmamux->clk);
+
+	return ret;
 }
 
 #ifdef CONFIG_PM
@@ -318,7 +332,54 @@ static int stm32_dmamux_runtime_resume(struct device *dev)
 }
 #endif
 
+#ifdef CONFIG_PM_SLEEP
+static int stm32_dmamux_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct stm32_dmamux_data *stm32_dmamux = platform_get_drvdata(pdev);
+	int i, ret;
+
+	ret = pm_runtime_get_sync(dev);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < stm32_dmamux->dma_requests; i++)
+		stm32_dmamux->ccr[i] = stm32_dmamux_read(stm32_dmamux->iomem,
+							 STM32_DMAMUX_CCR(i));
+
+	pm_runtime_put_sync(dev);
+
+	pm_runtime_force_suspend(dev);
+
+	return 0;
+}
+
+static int stm32_dmamux_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct stm32_dmamux_data *stm32_dmamux = platform_get_drvdata(pdev);
+	int i, ret;
+
+	ret = pm_runtime_force_resume(dev);
+	if (ret < 0)
+		return ret;
+
+	ret = pm_runtime_get_sync(dev);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < stm32_dmamux->dma_requests; i++)
+		stm32_dmamux_write(stm32_dmamux->iomem, STM32_DMAMUX_CCR(i),
+				   stm32_dmamux->ccr[i]);
+
+	pm_runtime_put_sync(dev);
+
+	return 0;
+}
+#endif
+
 static const struct dev_pm_ops stm32_dmamux_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(stm32_dmamux_suspend, stm32_dmamux_resume)
 	SET_RUNTIME_PM_OPS(stm32_dmamux_runtime_suspend,
 			   stm32_dmamux_runtime_resume, NULL)
 };
diff --git a/drivers/dma/stm32-mdma.c b/drivers/dma/stm32-mdma.c
index 5838311..5469563 100644
--- a/drivers/dma/stm32-mdma.c
+++ b/drivers/dma/stm32-mdma.c
@@ -273,7 +273,6 @@ struct stm32_mdma_device {
 	void __iomem *base;
 	struct clk *clk;
 	int irq;
-	struct reset_control *rst;
 	u32 nr_channels;
 	u32 nr_requests;
 	u32 nr_ahb_addr_masks;
@@ -1127,6 +1126,8 @@ static void stm32_mdma_start_transfer(struct stm32_mdma_chan *chan)
 		return;
 	}
 
+	list_del(&vdesc->node);
+
 	chan->desc = to_stm32_mdma_desc(vdesc);
 	hwdesc = chan->desc->node[0].hwdesc;
 	chan->curr_hwdesc = 0;
@@ -1242,8 +1243,10 @@ static int stm32_mdma_terminate_all(struct dma_chan *c)
 	LIST_HEAD(head);
 
 	spin_lock_irqsave(&chan->vchan.lock, flags);
-	if (chan->busy) {
-		stm32_mdma_stop(chan);
+	if (chan->desc) {
+		vchan_terminate_vdesc(&chan->desc->vdesc);
+		if (chan->busy)
+			stm32_mdma_stop(chan);
 		chan->desc = NULL;
 	}
 	vchan_get_all_descriptors(&chan->vchan, &head);
@@ -1331,7 +1334,6 @@ static enum dma_status stm32_mdma_tx_status(struct dma_chan *c,
 
 static void stm32_mdma_xfer_end(struct stm32_mdma_chan *chan)
 {
-	list_del(&chan->desc->vdesc.node);
 	vchan_cookie_complete(&chan->desc->vdesc);
 	chan->desc = NULL;
 	chan->busy = false;
@@ -1532,6 +1534,7 @@ static int stm32_mdma_probe(struct platform_device *pdev)
 	struct dma_device *dd;
 	struct device_node *of_node;
 	struct resource *res;
+	struct reset_control *rst;
 	u32 nr_channels, nr_requests;
 	int i, count, ret;
 
@@ -1579,8 +1582,8 @@ static int stm32_mdma_probe(struct platform_device *pdev)
 	dmadev->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(dmadev->clk)) {
 		ret = PTR_ERR(dmadev->clk);
-		if (ret == -EPROBE_DEFER)
-			dev_info(&pdev->dev, "Missing controller clock\n");
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Missing clock controller\n");
 		return ret;
 	}
 
@@ -1590,11 +1593,15 @@ static int stm32_mdma_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	dmadev->rst = devm_reset_control_get(&pdev->dev, NULL);
-	if (!IS_ERR(dmadev->rst)) {
-		reset_control_assert(dmadev->rst);
+	rst = devm_reset_control_get(&pdev->dev, NULL);
+	if (IS_ERR(rst)) {
+		ret = PTR_ERR(rst);
+		if (ret == -EPROBE_DEFER)
+			goto err_clk;
+	} else {
+		reset_control_assert(rst);
 		udelay(2);
-		reset_control_deassert(dmadev->rst);
+		reset_control_deassert(rst);
 	}
 
 	dd = &dmadev->ddev;
@@ -1614,6 +1621,8 @@ static int stm32_mdma_probe(struct platform_device *pdev)
 	dd->device_resume = stm32_mdma_resume;
 	dd->device_terminate_all = stm32_mdma_terminate_all;
 	dd->device_synchronize = stm32_mdma_synchronize;
+	dd->descriptor_reuse = true;
+
 	dd->src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
 		BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
 		BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) |
@@ -1637,25 +1646,27 @@ static int stm32_mdma_probe(struct platform_device *pdev)
 	}
 
 	dmadev->irq = platform_get_irq(pdev, 0);
-	if (dmadev->irq < 0)
-		return dmadev->irq;
+	if (dmadev->irq < 0) {
+		ret = dmadev->irq;
+		goto err_clk;
+	}
 
 	ret = devm_request_irq(&pdev->dev, dmadev->irq, stm32_mdma_irq_handler,
 			       0, dev_name(&pdev->dev), dmadev);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to request IRQ\n");
-		return ret;
+		goto err_clk;
 	}
 
 	ret = dmaenginem_async_device_register(dd);
 	if (ret)
-		return ret;
+		goto err_clk;
 
 	ret = of_dma_controller_register(of_node, stm32_mdma_of_xlate, dmadev);
 	if (ret < 0) {
 		dev_err(&pdev->dev,
 			"STM32 MDMA DMA OF registration failed %d\n", ret);
-		goto err_unregister;
+		goto err_clk;
 	}
 
 	platform_set_drvdata(pdev, dmadev);
@@ -1668,7 +1679,9 @@ static int stm32_mdma_probe(struct platform_device *pdev)
 
 	return 0;
 
-err_unregister:
+err_clk:
+	clk_disable_unprepare(dmadev->clk);
+
 	return ret;
 }
 
@@ -1697,7 +1710,40 @@ static int stm32_mdma_runtime_resume(struct device *dev)
 }
 #endif
 
+#ifdef CONFIG_PM_SLEEP
+static int stm32_mdma_pm_suspend(struct device *dev)
+{
+	struct stm32_mdma_device *dmadev = dev_get_drvdata(dev);
+	u32 ccr, id;
+	int ret;
+
+	ret = pm_runtime_get_sync(dev);
+	if (ret < 0)
+		return ret;
+
+	for (id = 0; id < dmadev->nr_channels; id++) {
+		ccr = stm32_mdma_read(dmadev, STM32_MDMA_CCR(id));
+		if (ccr & STM32_MDMA_CCR_EN) {
+			dev_warn(dev, "Suspend is prevented by Chan %i\n", id);
+			return -EBUSY;
+		}
+	}
+
+	pm_runtime_put_sync(dev);
+
+	pm_runtime_force_suspend(dev);
+
+	return 0;
+}
+
+static int stm32_mdma_pm_resume(struct device *dev)
+{
+	return pm_runtime_force_resume(dev);
+}
+#endif
+
 static const struct dev_pm_ops stm32_mdma_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(stm32_mdma_pm_suspend, stm32_mdma_pm_resume)
 	SET_RUNTIME_PM_OPS(stm32_mdma_runtime_suspend,
 			   stm32_mdma_runtime_resume, NULL)
 };
diff --git a/drivers/dma/sun4i-dma.c b/drivers/dma/sun4i-dma.c
index bbc2bda..e7ff09a 100644
--- a/drivers/dma/sun4i-dma.c
+++ b/drivers/dma/sun4i-dma.c
@@ -697,11 +697,13 @@ sun4i_dma_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t buf, size_t len,
 		dest = sconfig->dst_addr;
 		endpoints = SUN4I_DMA_CFG_DST_DRQ_TYPE(vchan->endpoint) |
 			    SUN4I_DMA_CFG_DST_ADDR_MODE(io_mode) |
-			    SUN4I_DMA_CFG_SRC_DRQ_TYPE(ram_type);
+			    SUN4I_DMA_CFG_SRC_DRQ_TYPE(ram_type) |
+			    SUN4I_DMA_CFG_SRC_ADDR_MODE(linear_mode);
 	} else {
 		src = sconfig->src_addr;
 		dest = buf;
 		endpoints = SUN4I_DMA_CFG_DST_DRQ_TYPE(ram_type) |
+			    SUN4I_DMA_CFG_DST_ADDR_MODE(linear_mode) |
 			    SUN4I_DMA_CFG_SRC_DRQ_TYPE(vchan->endpoint) |
 			    SUN4I_DMA_CFG_SRC_ADDR_MODE(io_mode);
 	}
diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c
index 4a750e2..f6a2f42 100644
--- a/drivers/dma/tegra20-apb-dma.c
+++ b/drivers/dma/tegra20-apb-dma.c
@@ -24,6 +24,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/reset.h>
 #include <linux/slab.h>
+#include <linux/wait.h>
 
 #include "dmaengine.h"
 
@@ -59,7 +60,7 @@
 #define TEGRA_APBDMA_STATUS_COUNT_MASK		0xFFFC
 
 #define TEGRA_APBDMA_CHAN_CSRE			0x00C
-#define TEGRA_APBDMA_CHAN_CSRE_PAUSE		(1 << 31)
+#define TEGRA_APBDMA_CHAN_CSRE_PAUSE		BIT(31)
 
 /* AHB memory address */
 #define TEGRA_APBDMA_CHAN_AHBPTR		0x010
@@ -120,21 +121,21 @@ struct tegra_dma;
  * @support_separate_wcount_reg: Support separate word count register.
  */
 struct tegra_dma_chip_data {
-	int nr_channels;
-	int channel_reg_size;
-	int max_dma_count;
+	unsigned int nr_channels;
+	unsigned int channel_reg_size;
+	unsigned int max_dma_count;
 	bool support_channel_pause;
 	bool support_separate_wcount_reg;
 };
 
 /* DMA channel registers */
 struct tegra_dma_channel_regs {
-	unsigned long	csr;
-	unsigned long	ahb_ptr;
-	unsigned long	apb_ptr;
-	unsigned long	ahb_seq;
-	unsigned long	apb_seq;
-	unsigned long	wcount;
+	u32 csr;
+	u32 ahb_ptr;
+	u32 apb_ptr;
+	u32 ahb_seq;
+	u32 apb_seq;
+	u32 wcount;
 };
 
 /*
@@ -168,7 +169,7 @@ struct tegra_dma_desc {
 	struct list_head		node;
 	struct list_head		tx_list;
 	struct list_head		cb_node;
-	int				cb_count;
+	unsigned int			cb_count;
 };
 
 struct tegra_dma_channel;
@@ -181,8 +182,7 @@ struct tegra_dma_channel {
 	struct dma_chan		dma_chan;
 	char			name[12];
 	bool			config_init;
-	int			id;
-	int			irq;
+	unsigned int		id;
 	void __iomem		*chan_addr;
 	spinlock_t		lock;
 	bool			busy;
@@ -202,7 +202,9 @@ struct tegra_dma_channel {
 	/* Channel-slave specific configuration */
 	unsigned int slave_id;
 	struct dma_slave_config dma_sconfig;
-	struct tegra_dma_channel_regs	channel_reg;
+	struct tegra_dma_channel_regs channel_reg;
+
+	struct wait_queue_head wq;
 };
 
 /* tegra_dma: Tegra DMA specific information */
@@ -222,9 +224,6 @@ struct tegra_dma {
 	 */
 	u32				global_pause_count;
 
-	/* Some register need to be cache before suspend */
-	u32				reg_gen;
-
 	/* Last member of the structure */
 	struct tegra_dma_channel channels[0];
 };
@@ -240,7 +239,7 @@ static inline u32 tdma_read(struct tegra_dma *tdma, u32 reg)
 }
 
 static inline void tdc_write(struct tegra_dma_channel *tdc,
-		u32 reg, u32 val)
+			     u32 reg, u32 val)
 {
 	writel(val, tdc->chan_addr + reg);
 }
@@ -255,8 +254,8 @@ static inline struct tegra_dma_channel *to_tegra_dma_chan(struct dma_chan *dc)
 	return container_of(dc, struct tegra_dma_channel, dma_chan);
 }
 
-static inline struct tegra_dma_desc *txd_to_tegra_dma_desc(
-		struct dma_async_tx_descriptor *td)
+static inline struct tegra_dma_desc *
+txd_to_tegra_dma_desc(struct dma_async_tx_descriptor *td)
 {
 	return container_of(td, struct tegra_dma_desc, txd);
 }
@@ -267,12 +266,9 @@ static inline struct device *tdc2dev(struct tegra_dma_channel *tdc)
 }
 
 static dma_cookie_t tegra_dma_tx_submit(struct dma_async_tx_descriptor *tx);
-static int tegra_dma_runtime_suspend(struct device *dev);
-static int tegra_dma_runtime_resume(struct device *dev);
 
 /* Get DMA desc from free list, if not there then allocate it.  */
-static struct tegra_dma_desc *tegra_dma_desc_get(
-		struct tegra_dma_channel *tdc)
+static struct tegra_dma_desc *tegra_dma_desc_get(struct tegra_dma_channel *tdc)
 {
 	struct tegra_dma_desc *dma_desc;
 	unsigned long flags;
@@ -299,11 +295,12 @@ static struct tegra_dma_desc *tegra_dma_desc_get(
 	dma_async_tx_descriptor_init(&dma_desc->txd, &tdc->dma_chan);
 	dma_desc->txd.tx_submit = tegra_dma_tx_submit;
 	dma_desc->txd.flags = 0;
+
 	return dma_desc;
 }
 
 static void tegra_dma_desc_put(struct tegra_dma_channel *tdc,
-		struct tegra_dma_desc *dma_desc)
+			       struct tegra_dma_desc *dma_desc)
 {
 	unsigned long flags;
 
@@ -314,29 +311,29 @@ static void tegra_dma_desc_put(struct tegra_dma_channel *tdc,
 	spin_unlock_irqrestore(&tdc->lock, flags);
 }
 
-static struct tegra_dma_sg_req *tegra_dma_sg_req_get(
-		struct tegra_dma_channel *tdc)
+static struct tegra_dma_sg_req *
+tegra_dma_sg_req_get(struct tegra_dma_channel *tdc)
 {
-	struct tegra_dma_sg_req *sg_req = NULL;
+	struct tegra_dma_sg_req *sg_req;
 	unsigned long flags;
 
 	spin_lock_irqsave(&tdc->lock, flags);
 	if (!list_empty(&tdc->free_sg_req)) {
-		sg_req = list_first_entry(&tdc->free_sg_req,
-					typeof(*sg_req), node);
+		sg_req = list_first_entry(&tdc->free_sg_req, typeof(*sg_req),
+					  node);
 		list_del(&sg_req->node);
 		spin_unlock_irqrestore(&tdc->lock, flags);
 		return sg_req;
 	}
 	spin_unlock_irqrestore(&tdc->lock, flags);
 
-	sg_req = kzalloc(sizeof(struct tegra_dma_sg_req), GFP_NOWAIT);
+	sg_req = kzalloc(sizeof(*sg_req), GFP_NOWAIT);
 
 	return sg_req;
 }
 
 static int tegra_dma_slave_config(struct dma_chan *dc,
-		struct dma_slave_config *sconfig)
+				  struct dma_slave_config *sconfig)
 {
 	struct tegra_dma_channel *tdc = to_tegra_dma_chan(dc);
 
@@ -353,11 +350,12 @@ static int tegra_dma_slave_config(struct dma_chan *dc,
 		tdc->slave_id = sconfig->slave_id;
 	}
 	tdc->config_init = true;
+
 	return 0;
 }
 
 static void tegra_dma_global_pause(struct tegra_dma_channel *tdc,
-	bool wait_for_burst_complete)
+				   bool wait_for_burst_complete)
 {
 	struct tegra_dma *tdma = tdc->tdma;
 
@@ -392,13 +390,13 @@ static void tegra_dma_global_resume(struct tegra_dma_channel *tdc)
 }
 
 static void tegra_dma_pause(struct tegra_dma_channel *tdc,
-	bool wait_for_burst_complete)
+			    bool wait_for_burst_complete)
 {
 	struct tegra_dma *tdma = tdc->tdma;
 
 	if (tdma->chip_data->support_channel_pause) {
 		tdc_write(tdc, TEGRA_APBDMA_CHAN_CSRE,
-				TEGRA_APBDMA_CHAN_CSRE_PAUSE);
+			  TEGRA_APBDMA_CHAN_CSRE_PAUSE);
 		if (wait_for_burst_complete)
 			udelay(TEGRA_APBDMA_BURST_COMPLETE_TIME);
 	} else {
@@ -410,17 +408,15 @@ static void tegra_dma_resume(struct tegra_dma_channel *tdc)
 {
 	struct tegra_dma *tdma = tdc->tdma;
 
-	if (tdma->chip_data->support_channel_pause) {
+	if (tdma->chip_data->support_channel_pause)
 		tdc_write(tdc, TEGRA_APBDMA_CHAN_CSRE, 0);
-	} else {
+	else
 		tegra_dma_global_resume(tdc);
-	}
 }
 
 static void tegra_dma_stop(struct tegra_dma_channel *tdc)
 {
-	u32 csr;
-	u32 status;
+	u32 csr, status;
 
 	/* Disable interrupts */
 	csr = tdc_read(tdc, TEGRA_APBDMA_CHAN_CSR);
@@ -441,7 +437,7 @@ static void tegra_dma_stop(struct tegra_dma_channel *tdc)
 }
 
 static void tegra_dma_start(struct tegra_dma_channel *tdc,
-		struct tegra_dma_sg_req *sg_req)
+			    struct tegra_dma_sg_req *sg_req)
 {
 	struct tegra_dma_channel_regs *ch_regs = &sg_req->ch_regs;
 
@@ -455,11 +451,11 @@ static void tegra_dma_start(struct tegra_dma_channel *tdc,
 
 	/* Start DMA */
 	tdc_write(tdc, TEGRA_APBDMA_CHAN_CSR,
-				ch_regs->csr | TEGRA_APBDMA_CSR_ENB);
+		  ch_regs->csr | TEGRA_APBDMA_CSR_ENB);
 }
 
 static void tegra_dma_configure_for_next(struct tegra_dma_channel *tdc,
-		struct tegra_dma_sg_req *nsg_req)
+					 struct tegra_dma_sg_req *nsg_req)
 {
 	unsigned long status;
 
@@ -493,9 +489,9 @@ static void tegra_dma_configure_for_next(struct tegra_dma_channel *tdc,
 	tdc_write(tdc, TEGRA_APBDMA_CHAN_AHBPTR, nsg_req->ch_regs.ahb_ptr);
 	if (tdc->tdma->chip_data->support_separate_wcount_reg)
 		tdc_write(tdc, TEGRA_APBDMA_CHAN_WCOUNT,
-						nsg_req->ch_regs.wcount);
+			  nsg_req->ch_regs.wcount);
 	tdc_write(tdc, TEGRA_APBDMA_CHAN_CSR,
-				nsg_req->ch_regs.csr | TEGRA_APBDMA_CSR_ENB);
+		  nsg_req->ch_regs.csr | TEGRA_APBDMA_CSR_ENB);
 	nsg_req->configured = true;
 	nsg_req->words_xferred = 0;
 
@@ -506,11 +502,7 @@ static void tdc_start_head_req(struct tegra_dma_channel *tdc)
 {
 	struct tegra_dma_sg_req *sg_req;
 
-	if (list_empty(&tdc->pending_sg_req))
-		return;
-
-	sg_req = list_first_entry(&tdc->pending_sg_req,
-					typeof(*sg_req), node);
+	sg_req = list_first_entry(&tdc->pending_sg_req, typeof(*sg_req), node);
 	tegra_dma_start(tdc, sg_req);
 	sg_req->configured = true;
 	sg_req->words_xferred = 0;
@@ -519,34 +511,32 @@ static void tdc_start_head_req(struct tegra_dma_channel *tdc)
 
 static void tdc_configure_next_head_desc(struct tegra_dma_channel *tdc)
 {
-	struct tegra_dma_sg_req *hsgreq;
-	struct tegra_dma_sg_req *hnsgreq;
-
-	if (list_empty(&tdc->pending_sg_req))
-		return;
+	struct tegra_dma_sg_req *hsgreq, *hnsgreq;
 
 	hsgreq = list_first_entry(&tdc->pending_sg_req, typeof(*hsgreq), node);
 	if (!list_is_last(&hsgreq->node, &tdc->pending_sg_req)) {
-		hnsgreq = list_first_entry(&hsgreq->node,
-					typeof(*hnsgreq), node);
+		hnsgreq = list_first_entry(&hsgreq->node, typeof(*hnsgreq),
+					   node);
 		tegra_dma_configure_for_next(tdc, hnsgreq);
 	}
 }
 
-static inline int get_current_xferred_count(struct tegra_dma_channel *tdc,
-	struct tegra_dma_sg_req *sg_req, unsigned long status)
+static inline unsigned int
+get_current_xferred_count(struct tegra_dma_channel *tdc,
+			  struct tegra_dma_sg_req *sg_req,
+			  unsigned long status)
 {
 	return sg_req->req_len - (status & TEGRA_APBDMA_STATUS_COUNT_MASK) - 4;
 }
 
 static void tegra_dma_abort_all(struct tegra_dma_channel *tdc)
 {
-	struct tegra_dma_sg_req *sgreq;
 	struct tegra_dma_desc *dma_desc;
+	struct tegra_dma_sg_req *sgreq;
 
 	while (!list_empty(&tdc->pending_sg_req)) {
-		sgreq = list_first_entry(&tdc->pending_sg_req,
-						typeof(*sgreq), node);
+		sgreq = list_first_entry(&tdc->pending_sg_req, typeof(*sgreq),
+					 node);
 		list_move_tail(&sgreq->node, &tdc->free_sg_req);
 		if (sgreq->last_sg) {
 			dma_desc = sgreq->dma_desc;
@@ -556,7 +546,7 @@ static void tegra_dma_abort_all(struct tegra_dma_channel *tdc)
 			/* Add in cb list if it is not there. */
 			if (!dma_desc->cb_count)
 				list_add_tail(&dma_desc->cb_node,
-							&tdc->cb_desc);
+					      &tdc->cb_desc);
 			dma_desc->cb_count++;
 		}
 	}
@@ -564,15 +554,9 @@ static void tegra_dma_abort_all(struct tegra_dma_channel *tdc)
 }
 
 static bool handle_continuous_head_request(struct tegra_dma_channel *tdc,
-		struct tegra_dma_sg_req *last_sg_req, bool to_terminate)
+					   bool to_terminate)
 {
-	struct tegra_dma_sg_req *hsgreq = NULL;
-
-	if (list_empty(&tdc->pending_sg_req)) {
-		dev_err(tdc2dev(tdc), "DMA is running without req\n");
-		tegra_dma_stop(tdc);
-		return false;
-	}
+	struct tegra_dma_sg_req *hsgreq;
 
 	/*
 	 * Check that head req on list should be in flight.
@@ -582,7 +566,8 @@ static bool handle_continuous_head_request(struct tegra_dma_channel *tdc,
 	hsgreq = list_first_entry(&tdc->pending_sg_req, typeof(*hsgreq), node);
 	if (!hsgreq->configured) {
 		tegra_dma_stop(tdc);
-		dev_err(tdc2dev(tdc), "Error in DMA transfer, aborting DMA\n");
+		pm_runtime_put(tdc->tdma->dev);
+		dev_err(tdc2dev(tdc), "DMA transfer underflow, aborting DMA\n");
 		tegra_dma_abort_all(tdc);
 		return false;
 	}
@@ -590,14 +575,15 @@ static bool handle_continuous_head_request(struct tegra_dma_channel *tdc,
 	/* Configure next request */
 	if (!to_terminate)
 		tdc_configure_next_head_desc(tdc);
+
 	return true;
 }
 
 static void handle_once_dma_done(struct tegra_dma_channel *tdc,
-	bool to_terminate)
+				 bool to_terminate)
 {
-	struct tegra_dma_sg_req *sgreq;
 	struct tegra_dma_desc *dma_desc;
+	struct tegra_dma_sg_req *sgreq;
 
 	tdc->busy = false;
 	sgreq = list_first_entry(&tdc->pending_sg_req, typeof(*sgreq), node);
@@ -616,17 +602,22 @@ static void handle_once_dma_done(struct tegra_dma_channel *tdc,
 	list_add_tail(&sgreq->node, &tdc->free_sg_req);
 
 	/* Do not start DMA if it is going to be terminate */
-	if (to_terminate || list_empty(&tdc->pending_sg_req))
+	if (to_terminate)
 		return;
 
+	if (list_empty(&tdc->pending_sg_req)) {
+		pm_runtime_put(tdc->tdma->dev);
+		return;
+	}
+
 	tdc_start_head_req(tdc);
 }
 
 static void handle_cont_sngl_cycle_dma_done(struct tegra_dma_channel *tdc,
-		bool to_terminate)
+					    bool to_terminate)
 {
-	struct tegra_dma_sg_req *sgreq;
 	struct tegra_dma_desc *dma_desc;
+	struct tegra_dma_sg_req *sgreq;
 	bool st;
 
 	sgreq = list_first_entry(&tdc->pending_sg_req, typeof(*sgreq), node);
@@ -647,7 +638,7 @@ static void handle_cont_sngl_cycle_dma_done(struct tegra_dma_channel *tdc,
 	if (!list_is_last(&sgreq->node, &tdc->pending_sg_req)) {
 		list_move_tail(&sgreq->node, &tdc->pending_sg_req);
 		sgreq->configured = false;
-		st = handle_continuous_head_request(tdc, sgreq, to_terminate);
+		st = handle_continuous_head_request(tdc, to_terminate);
 		if (!st)
 			dma_desc->dma_status = DMA_ERROR;
 	}
@@ -658,13 +649,13 @@ static void tegra_dma_tasklet(unsigned long data)
 	struct tegra_dma_channel *tdc = (struct tegra_dma_channel *)data;
 	struct dmaengine_desc_callback cb;
 	struct tegra_dma_desc *dma_desc;
+	unsigned int cb_count;
 	unsigned long flags;
-	int cb_count;
 
 	spin_lock_irqsave(&tdc->lock, flags);
 	while (!list_empty(&tdc->cb_desc)) {
-		dma_desc  = list_first_entry(&tdc->cb_desc,
-					typeof(*dma_desc), cb_node);
+		dma_desc = list_first_entry(&tdc->cb_desc, typeof(*dma_desc),
+					    cb_node);
 		list_del(&dma_desc->cb_node);
 		dmaengine_desc_get_callback(&dma_desc->txd, &cb);
 		cb_count = dma_desc->cb_count;
@@ -682,10 +673,9 @@ static void tegra_dma_tasklet(unsigned long data)
 static irqreturn_t tegra_dma_isr(int irq, void *dev_id)
 {
 	struct tegra_dma_channel *tdc = dev_id;
-	unsigned long status;
-	unsigned long flags;
+	u32 status;
 
-	spin_lock_irqsave(&tdc->lock, flags);
+	spin_lock(&tdc->lock);
 
 	trace_tegra_dma_isr(&tdc->dma_chan, irq);
 	status = tdc_read(tdc, TEGRA_APBDMA_CHAN_STATUS);
@@ -693,13 +683,15 @@ static irqreturn_t tegra_dma_isr(int irq, void *dev_id)
 		tdc_write(tdc, TEGRA_APBDMA_CHAN_STATUS, status);
 		tdc->isr_handler(tdc, false);
 		tasklet_schedule(&tdc->tasklet);
-		spin_unlock_irqrestore(&tdc->lock, flags);
+		wake_up_all(&tdc->wq);
+		spin_unlock(&tdc->lock);
 		return IRQ_HANDLED;
 	}
 
-	spin_unlock_irqrestore(&tdc->lock, flags);
-	dev_info(tdc2dev(tdc),
-		"Interrupt already served status 0x%08lx\n", status);
+	spin_unlock(&tdc->lock);
+	dev_info(tdc2dev(tdc), "Interrupt already served status 0x%08x\n",
+		 status);
+
 	return IRQ_NONE;
 }
 
@@ -715,6 +707,7 @@ static dma_cookie_t tegra_dma_tx_submit(struct dma_async_tx_descriptor *txd)
 	cookie = dma_cookie_assign(&dma_desc->txd);
 	list_splice_tail_init(&dma_desc->tx_list, &tdc->pending_sg_req);
 	spin_unlock_irqrestore(&tdc->lock, flags);
+
 	return cookie;
 }
 
@@ -722,6 +715,7 @@ static void tegra_dma_issue_pending(struct dma_chan *dc)
 {
 	struct tegra_dma_channel *tdc = to_tegra_dma_chan(dc);
 	unsigned long flags;
+	int err;
 
 	spin_lock_irqsave(&tdc->lock, flags);
 	if (list_empty(&tdc->pending_sg_req)) {
@@ -729,6 +723,12 @@ static void tegra_dma_issue_pending(struct dma_chan *dc)
 		goto end;
 	}
 	if (!tdc->busy) {
+		err = pm_runtime_get_sync(tdc->tdma->dev);
+		if (err < 0) {
+			dev_err(tdc2dev(tdc), "Failed to enable DMA\n");
+			goto end;
+		}
+
 		tdc_start_head_req(tdc);
 
 		/* Continuous single mode: Configure next req */
@@ -748,11 +748,10 @@ static void tegra_dma_issue_pending(struct dma_chan *dc)
 static int tegra_dma_terminate_all(struct dma_chan *dc)
 {
 	struct tegra_dma_channel *tdc = to_tegra_dma_chan(dc);
-	struct tegra_dma_sg_req *sgreq;
 	struct tegra_dma_desc *dma_desc;
+	struct tegra_dma_sg_req *sgreq;
 	unsigned long flags;
-	unsigned long status;
-	unsigned long wcount;
+	u32 status, wcount;
 	bool was_busy;
 
 	spin_lock_irqsave(&tdc->lock, flags);
@@ -778,30 +777,60 @@ static int tegra_dma_terminate_all(struct dma_chan *dc)
 	tegra_dma_stop(tdc);
 
 	if (!list_empty(&tdc->pending_sg_req) && was_busy) {
-		sgreq = list_first_entry(&tdc->pending_sg_req,
-					typeof(*sgreq), node);
+		sgreq = list_first_entry(&tdc->pending_sg_req, typeof(*sgreq),
+					 node);
 		sgreq->dma_desc->bytes_transferred +=
 				get_current_xferred_count(tdc, sgreq, wcount);
 	}
 	tegra_dma_resume(tdc);
 
+	pm_runtime_put(tdc->tdma->dev);
+	wake_up_all(&tdc->wq);
+
 skip_dma_stop:
 	tegra_dma_abort_all(tdc);
 
 	while (!list_empty(&tdc->cb_desc)) {
-		dma_desc  = list_first_entry(&tdc->cb_desc,
-					typeof(*dma_desc), cb_node);
+		dma_desc = list_first_entry(&tdc->cb_desc, typeof(*dma_desc),
+					    cb_node);
 		list_del(&dma_desc->cb_node);
 		dma_desc->cb_count = 0;
 	}
 	spin_unlock_irqrestore(&tdc->lock, flags);
+
 	return 0;
 }
 
+static bool tegra_dma_eoc_interrupt_deasserted(struct tegra_dma_channel *tdc)
+{
+	unsigned long flags;
+	u32 status;
+
+	spin_lock_irqsave(&tdc->lock, flags);
+	status = tdc_read(tdc, TEGRA_APBDMA_CHAN_STATUS);
+	spin_unlock_irqrestore(&tdc->lock, flags);
+
+	return !(status & TEGRA_APBDMA_STATUS_ISE_EOC);
+}
+
+static void tegra_dma_synchronize(struct dma_chan *dc)
+{
+	struct tegra_dma_channel *tdc = to_tegra_dma_chan(dc);
+
+	/*
+	 * CPU, which handles interrupt, could be busy in
+	 * uninterruptible state, in this case sibling CPU
+	 * should wait until interrupt is handled.
+	 */
+	wait_event(tdc->wq, tegra_dma_eoc_interrupt_deasserted(tdc));
+
+	tasklet_kill(&tdc->tasklet);
+}
+
 static unsigned int tegra_dma_sg_bytes_xferred(struct tegra_dma_channel *tdc,
 					       struct tegra_dma_sg_req *sg_req)
 {
-	unsigned long status, wcount = 0;
+	u32 status, wcount = 0;
 
 	if (!list_is_first(&sg_req->node, &tdc->pending_sg_req))
 		return 0;
@@ -858,7 +887,8 @@ static unsigned int tegra_dma_sg_bytes_xferred(struct tegra_dma_channel *tdc,
 }
 
 static enum dma_status tegra_dma_tx_status(struct dma_chan *dc,
-	dma_cookie_t cookie, struct dma_tx_state *txstate)
+					   dma_cookie_t cookie,
+					   struct dma_tx_state *txstate)
 {
 	struct tegra_dma_channel *tdc = to_tegra_dma_chan(dc);
 	struct tegra_dma_desc *dma_desc;
@@ -905,11 +935,12 @@ static enum dma_status tegra_dma_tx_status(struct dma_chan *dc,
 
 	trace_tegra_dma_tx_status(&tdc->dma_chan, cookie, txstate);
 	spin_unlock_irqrestore(&tdc->lock, flags);
+
 	return ret;
 }
 
-static inline int get_bus_width(struct tegra_dma_channel *tdc,
-		enum dma_slave_buswidth slave_bw)
+static inline unsigned int get_bus_width(struct tegra_dma_channel *tdc,
+					 enum dma_slave_buswidth slave_bw)
 {
 	switch (slave_bw) {
 	case DMA_SLAVE_BUSWIDTH_1_BYTE:
@@ -922,16 +953,17 @@ static inline int get_bus_width(struct tegra_dma_channel *tdc,
 		return TEGRA_APBDMA_APBSEQ_BUS_WIDTH_64;
 	default:
 		dev_warn(tdc2dev(tdc),
-			"slave bw is not supported, using 32bits\n");
+			 "slave bw is not supported, using 32bits\n");
 		return TEGRA_APBDMA_APBSEQ_BUS_WIDTH_32;
 	}
 }
 
-static inline int get_burst_size(struct tegra_dma_channel *tdc,
-	u32 burst_size, enum dma_slave_buswidth slave_bw, int len)
+static inline unsigned int get_burst_size(struct tegra_dma_channel *tdc,
+					  u32 burst_size,
+					  enum dma_slave_buswidth slave_bw,
+					  u32 len)
 {
-	int burst_byte;
-	int burst_ahb_width;
+	unsigned int burst_byte, burst_ahb_width;
 
 	/*
 	 * burst_size from client is in terms of the bus_width.
@@ -958,9 +990,12 @@ static inline int get_burst_size(struct tegra_dma_channel *tdc,
 }
 
 static int get_transfer_param(struct tegra_dma_channel *tdc,
-	enum dma_transfer_direction direction, unsigned long *apb_addr,
-	unsigned long *apb_seq,	unsigned long *csr, unsigned int *burst_size,
-	enum dma_slave_buswidth *slave_bw)
+			      enum dma_transfer_direction direction,
+			      u32 *apb_addr,
+			      u32 *apb_seq,
+			      u32 *csr,
+			      unsigned int *burst_size,
+			      enum dma_slave_buswidth *slave_bw)
 {
 	switch (direction) {
 	case DMA_MEM_TO_DEV:
@@ -981,13 +1016,15 @@ static int get_transfer_param(struct tegra_dma_channel *tdc,
 
 	default:
 		dev_err(tdc2dev(tdc), "DMA direction is not supported\n");
-		return -EINVAL;
+		break;
 	}
+
 	return -EINVAL;
 }
 
 static void tegra_dma_prep_wcount(struct tegra_dma_channel *tdc,
-	struct tegra_dma_channel_regs *ch_regs, u32 len)
+				  struct tegra_dma_channel_regs *ch_regs,
+				  u32 len)
 {
 	u32 len_field = (len - 4) & 0xFFFC;
 
@@ -997,20 +1034,23 @@ static void tegra_dma_prep_wcount(struct tegra_dma_channel *tdc,
 		ch_regs->csr |= len_field;
 }
 
-static struct dma_async_tx_descriptor *tegra_dma_prep_slave_sg(
-	struct dma_chan *dc, struct scatterlist *sgl, unsigned int sg_len,
-	enum dma_transfer_direction direction, unsigned long flags,
-	void *context)
+static struct dma_async_tx_descriptor *
+tegra_dma_prep_slave_sg(struct dma_chan *dc,
+			struct scatterlist *sgl,
+			unsigned int sg_len,
+			enum dma_transfer_direction direction,
+			unsigned long flags,
+			void *context)
 {
 	struct tegra_dma_channel *tdc = to_tegra_dma_chan(dc);
-	struct tegra_dma_desc *dma_desc;
-	unsigned int i;
-	struct scatterlist *sg;
-	unsigned long csr, ahb_seq, apb_ptr, apb_seq;
-	struct list_head req_list;
-	struct tegra_dma_sg_req  *sg_req = NULL;
-	u32 burst_size;
+	struct tegra_dma_sg_req *sg_req = NULL;
+	u32 csr, ahb_seq, apb_ptr, apb_seq;
 	enum dma_slave_buswidth slave_bw;
+	struct tegra_dma_desc *dma_desc;
+	struct list_head req_list;
+	struct scatterlist *sg;
+	unsigned int burst_size;
+	unsigned int i;
 
 	if (!tdc->config_init) {
 		dev_err(tdc2dev(tdc), "DMA channel is not configured\n");
@@ -1022,7 +1062,7 @@ static struct dma_async_tx_descriptor *tegra_dma_prep_slave_sg(
 	}
 
 	if (get_transfer_param(tdc, direction, &apb_ptr, &apb_seq, &csr,
-				&burst_size, &slave_bw) < 0)
+			       &burst_size, &slave_bw) < 0)
 		return NULL;
 
 	INIT_LIST_HEAD(&req_list);
@@ -1068,7 +1108,7 @@ static struct dma_async_tx_descriptor *tegra_dma_prep_slave_sg(
 		len = sg_dma_len(sg);
 
 		if ((len & 3) || (mem & 3) ||
-				(len > tdc->tdma->chip_data->max_dma_count)) {
+		    len > tdc->tdma->chip_data->max_dma_count) {
 			dev_err(tdc2dev(tdc),
 				"DMA length/memory address is not supported\n");
 			tegra_dma_desc_put(tdc, dma_desc);
@@ -1120,20 +1160,21 @@ static struct dma_async_tx_descriptor *tegra_dma_prep_slave_sg(
 	return &dma_desc->txd;
 }
 
-static struct dma_async_tx_descriptor *tegra_dma_prep_dma_cyclic(
-	struct dma_chan *dc, dma_addr_t buf_addr, size_t buf_len,
-	size_t period_len, enum dma_transfer_direction direction,
-	unsigned long flags)
+static struct dma_async_tx_descriptor *
+tegra_dma_prep_dma_cyclic(struct dma_chan *dc, dma_addr_t buf_addr,
+			  size_t buf_len,
+			  size_t period_len,
+			  enum dma_transfer_direction direction,
+			  unsigned long flags)
 {
 	struct tegra_dma_channel *tdc = to_tegra_dma_chan(dc);
-	struct tegra_dma_desc *dma_desc = NULL;
 	struct tegra_dma_sg_req *sg_req = NULL;
-	unsigned long csr, ahb_seq, apb_ptr, apb_seq;
-	int len;
-	size_t remain_len;
-	dma_addr_t mem = buf_addr;
-	u32 burst_size;
+	u32 csr, ahb_seq, apb_ptr, apb_seq;
 	enum dma_slave_buswidth slave_bw;
+	struct tegra_dma_desc *dma_desc;
+	dma_addr_t mem = buf_addr;
+	unsigned int burst_size;
+	size_t len, remain_len;
 
 	if (!buf_len || !period_len) {
 		dev_err(tdc2dev(tdc), "Invalid buffer/period len\n");
@@ -1167,13 +1208,13 @@ static struct dma_async_tx_descriptor *tegra_dma_prep_dma_cyclic(
 
 	len = period_len;
 	if ((len & 3) || (buf_addr & 3) ||
-			(len > tdc->tdma->chip_data->max_dma_count)) {
+	    len > tdc->tdma->chip_data->max_dma_count) {
 		dev_err(tdc2dev(tdc), "Req len/mem address is not correct\n");
 		return NULL;
 	}
 
 	if (get_transfer_param(tdc, direction, &apb_ptr, &apb_seq, &csr,
-				&burst_size, &slave_bw) < 0)
+			       &burst_size, &slave_bw) < 0)
 		return NULL;
 
 	ahb_seq = TEGRA_APBDMA_AHBSEQ_INTR_ENB;
@@ -1259,15 +1300,8 @@ static struct dma_async_tx_descriptor *tegra_dma_prep_dma_cyclic(
 static int tegra_dma_alloc_chan_resources(struct dma_chan *dc)
 {
 	struct tegra_dma_channel *tdc = to_tegra_dma_chan(dc);
-	struct tegra_dma *tdma = tdc->tdma;
-	int ret;
 
 	dma_cookie_init(&tdc->dma_chan);
-	tdc->config_init = false;
-
-	ret = pm_runtime_get_sync(tdma->dev);
-	if (ret < 0)
-		return ret;
 
 	return 0;
 }
@@ -1275,33 +1309,29 @@ static int tegra_dma_alloc_chan_resources(struct dma_chan *dc)
 static void tegra_dma_free_chan_resources(struct dma_chan *dc)
 {
 	struct tegra_dma_channel *tdc = to_tegra_dma_chan(dc);
-	struct tegra_dma *tdma = tdc->tdma;
 	struct tegra_dma_desc *dma_desc;
 	struct tegra_dma_sg_req *sg_req;
 	struct list_head dma_desc_list;
 	struct list_head sg_req_list;
-	unsigned long flags;
 
 	INIT_LIST_HEAD(&dma_desc_list);
 	INIT_LIST_HEAD(&sg_req_list);
 
 	dev_dbg(tdc2dev(tdc), "Freeing channel %d\n", tdc->id);
 
-	if (tdc->busy)
-		tegra_dma_terminate_all(dc);
+	tegra_dma_terminate_all(dc);
+	tasklet_kill(&tdc->tasklet);
 
-	spin_lock_irqsave(&tdc->lock, flags);
 	list_splice_init(&tdc->pending_sg_req, &sg_req_list);
 	list_splice_init(&tdc->free_sg_req, &sg_req_list);
 	list_splice_init(&tdc->free_dma_desc, &dma_desc_list);
 	INIT_LIST_HEAD(&tdc->cb_desc);
 	tdc->config_init = false;
 	tdc->isr_handler = NULL;
-	spin_unlock_irqrestore(&tdc->lock, flags);
 
 	while (!list_empty(&dma_desc_list)) {
-		dma_desc = list_first_entry(&dma_desc_list,
-					typeof(*dma_desc), node);
+		dma_desc = list_first_entry(&dma_desc_list, typeof(*dma_desc),
+					    node);
 		list_del(&dma_desc->node);
 		kfree(dma_desc);
 	}
@@ -1311,7 +1341,6 @@ static void tegra_dma_free_chan_resources(struct dma_chan *dc)
 		list_del(&sg_req->node);
 		kfree(sg_req);
 	}
-	pm_runtime_put(tdma->dev);
 
 	tdc->slave_id = TEGRA_APBDMA_SLAVE_ID_INVALID;
 }
@@ -1320,8 +1349,8 @@ static struct dma_chan *tegra_dma_of_xlate(struct of_phandle_args *dma_spec,
 					   struct of_dma *ofdma)
 {
 	struct tegra_dma *tdma = ofdma->of_dma_data;
-	struct dma_chan *chan;
 	struct tegra_dma_channel *tdc;
+	struct dma_chan *chan;
 
 	if (dma_spec->args[0] > TEGRA_APBDMA_CSR_REQ_SEL_MASK) {
 		dev_err(tdma->dev, "Invalid slave id: %d\n", dma_spec->args[0]);
@@ -1374,23 +1403,48 @@ static const struct tegra_dma_chip_data tegra148_dma_chip_data = {
 	.support_separate_wcount_reg = true,
 };
 
-static int tegra_dma_probe(struct platform_device *pdev)
+static int tegra_dma_init_hw(struct tegra_dma *tdma)
 {
-	struct resource *res;
-	struct tegra_dma *tdma;
-	int ret;
-	int i;
-	const struct tegra_dma_chip_data *cdata;
+	int err;
 
-	cdata = of_device_get_match_data(&pdev->dev);
-	if (!cdata) {
-		dev_err(&pdev->dev, "Error: No device match data found\n");
-		return -ENODEV;
+	err = reset_control_assert(tdma->rst);
+	if (err) {
+		dev_err(tdma->dev, "failed to assert reset: %d\n", err);
+		return err;
 	}
 
-	tdma = devm_kzalloc(&pdev->dev,
-			    struct_size(tdma, channels, cdata->nr_channels),
-			    GFP_KERNEL);
+	err = clk_enable(tdma->dma_clk);
+	if (err) {
+		dev_err(tdma->dev, "failed to enable clk: %d\n", err);
+		return err;
+	}
+
+	/* reset DMA controller */
+	udelay(2);
+	reset_control_deassert(tdma->rst);
+
+	/* enable global DMA registers */
+	tdma_write(tdma, TEGRA_APBDMA_GENERAL, TEGRA_APBDMA_GENERAL_ENABLE);
+	tdma_write(tdma, TEGRA_APBDMA_CONTROL, 0);
+	tdma_write(tdma, TEGRA_APBDMA_IRQ_MASK_SET, 0xFFFFFFFF);
+
+	clk_disable(tdma->dma_clk);
+
+	return 0;
+}
+
+static int tegra_dma_probe(struct platform_device *pdev)
+{
+	const struct tegra_dma_chip_data *cdata;
+	struct tegra_dma *tdma;
+	unsigned int i;
+	size_t size;
+	int ret;
+
+	cdata = of_device_get_match_data(&pdev->dev);
+	size = struct_size(tdma, channels, cdata->nr_channels);
+
+	tdma = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
 	if (!tdma)
 		return -ENOMEM;
 
@@ -1398,8 +1452,7 @@ static int tegra_dma_probe(struct platform_device *pdev)
 	tdma->chip_data = cdata;
 	platform_set_drvdata(pdev, tdma);
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	tdma->base_addr = devm_ioremap_resource(&pdev->dev, res);
+	tdma->base_addr = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(tdma->base_addr))
 		return PTR_ERR(tdma->base_addr);
 
@@ -1417,64 +1470,54 @@ static int tegra_dma_probe(struct platform_device *pdev)
 
 	spin_lock_init(&tdma->global_lock);
 
-	pm_runtime_enable(&pdev->dev);
-	if (!pm_runtime_enabled(&pdev->dev))
-		ret = tegra_dma_runtime_resume(&pdev->dev);
-	else
-		ret = pm_runtime_get_sync(&pdev->dev);
-
-	if (ret < 0) {
-		pm_runtime_disable(&pdev->dev);
+	ret = clk_prepare(tdma->dma_clk);
+	if (ret)
 		return ret;
-	}
 
-	/* Reset DMA controller */
-	reset_control_assert(tdma->rst);
-	udelay(2);
-	reset_control_deassert(tdma->rst);
+	ret = tegra_dma_init_hw(tdma);
+	if (ret)
+		goto err_clk_unprepare;
 
-	/* Enable global DMA registers */
-	tdma_write(tdma, TEGRA_APBDMA_GENERAL, TEGRA_APBDMA_GENERAL_ENABLE);
-	tdma_write(tdma, TEGRA_APBDMA_CONTROL, 0);
-	tdma_write(tdma, TEGRA_APBDMA_IRQ_MASK_SET, 0xFFFFFFFFul);
-
-	pm_runtime_put(&pdev->dev);
+	pm_runtime_irq_safe(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
 
 	INIT_LIST_HEAD(&tdma->dma_dev.channels);
 	for (i = 0; i < cdata->nr_channels; i++) {
 		struct tegra_dma_channel *tdc = &tdma->channels[i];
+		int irq;
 
 		tdc->chan_addr = tdma->base_addr +
 				 TEGRA_APBDMA_CHANNEL_BASE_ADD_OFFSET +
 				 (i * cdata->channel_reg_size);
 
-		res = platform_get_resource(pdev, IORESOURCE_IRQ, i);
-		if (!res) {
-			ret = -EINVAL;
-			dev_err(&pdev->dev, "No irq resource for chan %d\n", i);
-			goto err_irq;
+		irq = platform_get_irq(pdev, i);
+		if (irq < 0) {
+			ret = irq;
+			goto err_pm_disable;
 		}
-		tdc->irq = res->start;
+
 		snprintf(tdc->name, sizeof(tdc->name), "apbdma.%d", i);
-		ret = request_irq(tdc->irq, tegra_dma_isr, 0, tdc->name, tdc);
+		ret = devm_request_irq(&pdev->dev, irq, tegra_dma_isr, 0,
+				       tdc->name, tdc);
 		if (ret) {
 			dev_err(&pdev->dev,
 				"request_irq failed with err %d channel %d\n",
 				ret, i);
-			goto err_irq;
+			goto err_pm_disable;
 		}
 
 		tdc->dma_chan.device = &tdma->dma_dev;
 		dma_cookie_init(&tdc->dma_chan);
 		list_add_tail(&tdc->dma_chan.device_node,
-				&tdma->dma_dev.channels);
+			      &tdma->dma_dev.channels);
 		tdc->tdma = tdma;
 		tdc->id = i;
 		tdc->slave_id = TEGRA_APBDMA_SLAVE_ID_INVALID;
 
 		tasklet_init(&tdc->tasklet, tegra_dma_tasklet,
-				(unsigned long)tdc);
+			     (unsigned long)tdc);
 		spin_lock_init(&tdc->lock);
+		init_waitqueue_head(&tdc->wq);
 
 		INIT_LIST_HEAD(&tdc->pending_sg_req);
 		INIT_LIST_HEAD(&tdc->free_sg_req);
@@ -1506,6 +1549,7 @@ static int tegra_dma_probe(struct platform_device *pdev)
 	tdma->dma_dev.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
 	tdma->dma_dev.device_config = tegra_dma_slave_config;
 	tdma->dma_dev.device_terminate_all = tegra_dma_terminate_all;
+	tdma->dma_dev.device_synchronize = tegra_dma_synchronize;
 	tdma->dma_dev.device_tx_status = tegra_dma_tx_status;
 	tdma->dma_dev.device_issue_pending = tegra_dma_issue_pending;
 
@@ -1513,7 +1557,7 @@ static int tegra_dma_probe(struct platform_device *pdev)
 	if (ret < 0) {
 		dev_err(&pdev->dev,
 			"Tegra20 APB DMA driver registration failed %d\n", ret);
-		goto err_irq;
+		goto err_pm_disable;
 	}
 
 	ret = of_dma_controller_register(pdev->dev.of_node,
@@ -1524,118 +1568,92 @@ static int tegra_dma_probe(struct platform_device *pdev)
 		goto err_unregister_dma_dev;
 	}
 
-	dev_info(&pdev->dev, "Tegra20 APB DMA driver register %d channels\n",
-			cdata->nr_channels);
+	dev_info(&pdev->dev, "Tegra20 APB DMA driver registered %u channels\n",
+		 cdata->nr_channels);
+
 	return 0;
 
 err_unregister_dma_dev:
 	dma_async_device_unregister(&tdma->dma_dev);
-err_irq:
-	while (--i >= 0) {
-		struct tegra_dma_channel *tdc = &tdma->channels[i];
 
-		free_irq(tdc->irq, tdc);
-		tasklet_kill(&tdc->tasklet);
-	}
-
+err_pm_disable:
 	pm_runtime_disable(&pdev->dev);
-	if (!pm_runtime_status_suspended(&pdev->dev))
-		tegra_dma_runtime_suspend(&pdev->dev);
+
+err_clk_unprepare:
+	clk_unprepare(tdma->dma_clk);
+
 	return ret;
 }
 
 static int tegra_dma_remove(struct platform_device *pdev)
 {
 	struct tegra_dma *tdma = platform_get_drvdata(pdev);
-	int i;
-	struct tegra_dma_channel *tdc;
 
+	of_dma_controller_free(pdev->dev.of_node);
 	dma_async_device_unregister(&tdma->dma_dev);
-
-	for (i = 0; i < tdma->chip_data->nr_channels; ++i) {
-		tdc = &tdma->channels[i];
-		free_irq(tdc->irq, tdc);
-		tasklet_kill(&tdc->tasklet);
-	}
-
 	pm_runtime_disable(&pdev->dev);
-	if (!pm_runtime_status_suspended(&pdev->dev))
-		tegra_dma_runtime_suspend(&pdev->dev);
+	clk_unprepare(tdma->dma_clk);
 
 	return 0;
 }
 
-static int tegra_dma_runtime_suspend(struct device *dev)
+static int __maybe_unused tegra_dma_runtime_suspend(struct device *dev)
 {
 	struct tegra_dma *tdma = dev_get_drvdata(dev);
-	int i;
 
-	tdma->reg_gen = tdma_read(tdma, TEGRA_APBDMA_GENERAL);
-	for (i = 0; i < tdma->chip_data->nr_channels; i++) {
-		struct tegra_dma_channel *tdc = &tdma->channels[i];
-		struct tegra_dma_channel_regs *ch_reg = &tdc->channel_reg;
-
-		/* Only save the state of DMA channels that are in use */
-		if (!tdc->config_init)
-			continue;
-
-		ch_reg->csr = tdc_read(tdc, TEGRA_APBDMA_CHAN_CSR);
-		ch_reg->ahb_ptr = tdc_read(tdc, TEGRA_APBDMA_CHAN_AHBPTR);
-		ch_reg->apb_ptr = tdc_read(tdc, TEGRA_APBDMA_CHAN_APBPTR);
-		ch_reg->ahb_seq = tdc_read(tdc, TEGRA_APBDMA_CHAN_AHBSEQ);
-		ch_reg->apb_seq = tdc_read(tdc, TEGRA_APBDMA_CHAN_APBSEQ);
-		if (tdma->chip_data->support_separate_wcount_reg)
-			ch_reg->wcount = tdc_read(tdc,
-						  TEGRA_APBDMA_CHAN_WCOUNT);
-	}
-
-	clk_disable_unprepare(tdma->dma_clk);
+	clk_disable(tdma->dma_clk);
 
 	return 0;
 }
 
-static int tegra_dma_runtime_resume(struct device *dev)
+static int __maybe_unused tegra_dma_runtime_resume(struct device *dev)
 {
 	struct tegra_dma *tdma = dev_get_drvdata(dev);
-	int i, ret;
 
-	ret = clk_prepare_enable(tdma->dma_clk);
-	if (ret < 0) {
-		dev_err(dev, "clk_enable failed: %d\n", ret);
-		return ret;
-	}
+	return clk_enable(tdma->dma_clk);
+}
 
-	tdma_write(tdma, TEGRA_APBDMA_GENERAL, tdma->reg_gen);
-	tdma_write(tdma, TEGRA_APBDMA_CONTROL, 0);
-	tdma_write(tdma, TEGRA_APBDMA_IRQ_MASK_SET, 0xFFFFFFFFul);
+static int __maybe_unused tegra_dma_dev_suspend(struct device *dev)
+{
+	struct tegra_dma *tdma = dev_get_drvdata(dev);
+	unsigned long flags;
+	unsigned int i;
+	bool busy;
 
 	for (i = 0; i < tdma->chip_data->nr_channels; i++) {
 		struct tegra_dma_channel *tdc = &tdma->channels[i];
-		struct tegra_dma_channel_regs *ch_reg = &tdc->channel_reg;
 
-		/* Only restore the state of DMA channels that are in use */
-		if (!tdc->config_init)
-			continue;
+		tasklet_kill(&tdc->tasklet);
 
-		if (tdma->chip_data->support_separate_wcount_reg)
-			tdc_write(tdc, TEGRA_APBDMA_CHAN_WCOUNT,
-				  ch_reg->wcount);
-		tdc_write(tdc, TEGRA_APBDMA_CHAN_APBSEQ, ch_reg->apb_seq);
-		tdc_write(tdc, TEGRA_APBDMA_CHAN_APBPTR, ch_reg->apb_ptr);
-		tdc_write(tdc, TEGRA_APBDMA_CHAN_AHBSEQ, ch_reg->ahb_seq);
-		tdc_write(tdc, TEGRA_APBDMA_CHAN_AHBPTR, ch_reg->ahb_ptr);
-		tdc_write(tdc, TEGRA_APBDMA_CHAN_CSR,
-			(ch_reg->csr & ~TEGRA_APBDMA_CSR_ENB));
+		spin_lock_irqsave(&tdc->lock, flags);
+		busy = tdc->busy;
+		spin_unlock_irqrestore(&tdc->lock, flags);
+
+		if (busy) {
+			dev_err(tdma->dev, "channel %u busy\n", i);
+			return -EBUSY;
+		}
 	}
 
-	return 0;
+	return pm_runtime_force_suspend(dev);
+}
+
+static int __maybe_unused tegra_dma_dev_resume(struct device *dev)
+{
+	struct tegra_dma *tdma = dev_get_drvdata(dev);
+	int err;
+
+	err = tegra_dma_init_hw(tdma);
+	if (err)
+		return err;
+
+	return pm_runtime_force_resume(dev);
 }
 
 static const struct dev_pm_ops tegra_dma_dev_pm_ops = {
 	SET_RUNTIME_PM_OPS(tegra_dma_runtime_suspend, tegra_dma_runtime_resume,
 			   NULL)
-	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
-				pm_runtime_force_resume)
+	SET_SYSTEM_SLEEP_PM_OPS(tegra_dma_dev_suspend, tegra_dma_dev_resume)
 };
 
 static const struct of_device_id tegra_dma_of_match[] = {
@@ -1668,7 +1686,6 @@ static struct platform_driver tegra_dmac_driver = {
 
 module_platform_driver(tegra_dmac_driver);
 
-MODULE_ALIAS("platform:tegra20-apbdma");
 MODULE_DESCRIPTION("NVIDIA Tegra APB DMA Controller driver");
 MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/dma/tegra210-adma.c b/drivers/dma/tegra210-adma.c
index 6e12685..c4ce5df 100644
--- a/drivers/dma/tegra210-adma.c
+++ b/drivers/dma/tegra210-adma.c
@@ -164,7 +164,7 @@ struct tegra_adma {
 	const struct tegra_adma_chip_data *cdata;
 
 	/* Last member of the structure */
-	struct tegra_adma_chan		channels[0];
+	struct tegra_adma_chan		channels[];
 };
 
 static inline void tdma_write(struct tegra_adma *tdma, u32 reg, u32 val)
diff --git a/drivers/dma/ti/dma-crossbar.c b/drivers/dma/ti/dma-crossbar.c
index f255056..4ba8fa5 100644
--- a/drivers/dma/ti/dma-crossbar.c
+++ b/drivers/dma/ti/dma-crossbar.c
@@ -133,7 +133,6 @@ static int ti_am335x_xbar_probe(struct platform_device *pdev)
 	const struct of_device_id *match;
 	struct device_node *dma_node;
 	struct ti_am335x_xbar_data *xbar;
-	struct resource *res;
 	void __iomem *iomem;
 	int i, ret;
 
@@ -173,8 +172,7 @@ static int ti_am335x_xbar_probe(struct platform_device *pdev)
 		xbar->xbar_events = TI_AM335X_XBAR_LINES;
 	}
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	iomem = devm_ioremap_resource(&pdev->dev, res);
+	iomem = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(iomem))
 		return PTR_ERR(iomem);
 
@@ -323,7 +321,6 @@ static int ti_dra7_xbar_probe(struct platform_device *pdev)
 	struct device_node *dma_node;
 	struct ti_dra7_xbar_data *xbar;
 	struct property *prop;
-	struct resource *res;
 	u32 safe_val;
 	int sz;
 	void __iomem *iomem;
@@ -403,8 +400,7 @@ static int ti_dra7_xbar_probe(struct platform_device *pdev)
 		kfree(rsv_events);
 	}
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	iomem = devm_ioremap_resource(&pdev->dev, res);
+	iomem = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(iomem))
 		return PTR_ERR(iomem);
 
diff --git a/drivers/dma/ti/edma.c b/drivers/dma/ti/edma.c
index 03a7f64..c4a5c17 100644
--- a/drivers/dma/ti/edma.c
+++ b/drivers/dma/ti/edma.c
@@ -1275,6 +1275,81 @@ static struct dma_async_tx_descriptor *edma_prep_dma_memcpy(
 	return vchan_tx_prep(&echan->vchan, &edesc->vdesc, tx_flags);
 }
 
+static struct dma_async_tx_descriptor *
+edma_prep_dma_interleaved(struct dma_chan *chan,
+			  struct dma_interleaved_template *xt,
+			  unsigned long tx_flags)
+{
+	struct device *dev = chan->device->dev;
+	struct edma_chan *echan = to_edma_chan(chan);
+	struct edmacc_param *param;
+	struct edma_desc *edesc;
+	size_t src_icg, dst_icg;
+	int src_bidx, dst_bidx;
+
+	/* Slave mode is not supported */
+	if (is_slave_direction(xt->dir))
+		return NULL;
+
+	if (xt->frame_size != 1 || xt->numf == 0)
+		return NULL;
+
+	if (xt->sgl[0].size > SZ_64K || xt->numf > SZ_64K)
+		return NULL;
+
+	src_icg = dmaengine_get_src_icg(xt, &xt->sgl[0]);
+	if (src_icg) {
+		src_bidx = src_icg + xt->sgl[0].size;
+	} else if (xt->src_inc) {
+		src_bidx = xt->sgl[0].size;
+	} else {
+		dev_err(dev, "%s: SRC constant addressing is not supported\n",
+			__func__);
+		return NULL;
+	}
+
+	dst_icg = dmaengine_get_dst_icg(xt, &xt->sgl[0]);
+	if (dst_icg) {
+		dst_bidx = dst_icg + xt->sgl[0].size;
+	} else if (xt->dst_inc) {
+		dst_bidx = xt->sgl[0].size;
+	} else {
+		dev_err(dev, "%s: DST constant addressing is not supported\n",
+			__func__);
+		return NULL;
+	}
+
+	if (src_bidx > SZ_64K || dst_bidx > SZ_64K)
+		return NULL;
+
+	edesc = kzalloc(struct_size(edesc, pset, 1), GFP_ATOMIC);
+	if (!edesc)
+		return NULL;
+
+	edesc->direction = DMA_MEM_TO_MEM;
+	edesc->echan = echan;
+	edesc->pset_nr = 1;
+
+	param = &edesc->pset[0].param;
+
+	param->src = xt->src_start;
+	param->dst = xt->dst_start;
+	param->a_b_cnt = xt->numf << 16 | xt->sgl[0].size;
+	param->ccnt = 1;
+	param->src_dst_bidx = (dst_bidx << 16) | src_bidx;
+	param->src_dst_cidx = 0;
+
+	param->opt = EDMA_TCC(EDMA_CHAN_SLOT(echan->ch_num));
+	param->opt |= ITCCHEN;
+	/* Enable transfer complete interrupt if requested */
+	if (tx_flags & DMA_PREP_INTERRUPT)
+		param->opt |= TCINTEN;
+	else
+		edesc->polled = true;
+
+	return vchan_tx_prep(&echan->vchan, &edesc->vdesc, tx_flags);
+}
+
 static struct dma_async_tx_descriptor *edma_prep_dma_cyclic(
 	struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
 	size_t period_len, enum dma_transfer_direction direction,
@@ -1917,7 +1992,9 @@ static void edma_dma_init(struct edma_cc *ecc, bool legacy_mode)
 			 "Legacy memcpy is enabled, things might not work\n");
 
 		dma_cap_set(DMA_MEMCPY, s_ddev->cap_mask);
+		dma_cap_set(DMA_INTERLEAVE, s_ddev->cap_mask);
 		s_ddev->device_prep_dma_memcpy = edma_prep_dma_memcpy;
+		s_ddev->device_prep_interleaved_dma = edma_prep_dma_interleaved;
 		s_ddev->directions = BIT(DMA_MEM_TO_MEM);
 	}
 
@@ -1953,8 +2030,10 @@ static void edma_dma_init(struct edma_cc *ecc, bool legacy_mode)
 
 		dma_cap_zero(m_ddev->cap_mask);
 		dma_cap_set(DMA_MEMCPY, m_ddev->cap_mask);
+		dma_cap_set(DMA_INTERLEAVE, m_ddev->cap_mask);
 
 		m_ddev->device_prep_dma_memcpy = edma_prep_dma_memcpy;
+		m_ddev->device_prep_interleaved_dma = edma_prep_dma_interleaved;
 		m_ddev->device_alloc_chan_resources = edma_alloc_chan_resources;
 		m_ddev->device_free_chan_resources = edma_free_chan_resources;
 		m_ddev->device_issue_pending = edma_issue_pending;
diff --git a/drivers/dma/ti/k3-udma-glue.c b/drivers/dma/ti/k3-udma-glue.c
index 4d7561a..64c8955 100644
--- a/drivers/dma/ti/k3-udma-glue.c
+++ b/drivers/dma/ti/k3-udma-glue.c
@@ -32,6 +32,7 @@ struct k3_udma_glue_common {
 	bool epib;
 	u32  psdata_size;
 	u32  swdata_size;
+	u32  atype;
 };
 
 struct k3_udma_glue_tx_channel {
@@ -121,6 +122,15 @@ static int of_k3_udma_glue_parse_chn(struct device_node *chn_np,
 		return -ENOENT;
 
 	thread_id = dma_spec.args[0];
+	if (dma_spec.args_count == 2) {
+		if (dma_spec.args[1] > 2) {
+			dev_err(common->dev, "Invalid channel atype: %u\n",
+				dma_spec.args[1]);
+			ret = -EINVAL;
+			goto out_put_spec;
+		}
+		common->atype = dma_spec.args[1];
+	}
 
 	if (tx_chn && !(thread_id & K3_PSIL_DST_THREAD_ID_OFFSET)) {
 		ret = -EINVAL;
@@ -202,7 +212,8 @@ static int k3_udma_glue_cfg_tx_chn(struct k3_udma_glue_tx_channel *tx_chn)
 			TI_SCI_MSG_VALUE_RM_UDMAP_CH_CHAN_TYPE_VALID |
 			TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_SUPR_TDPKT_VALID |
 			TI_SCI_MSG_VALUE_RM_UDMAP_CH_FETCH_SIZE_VALID |
-			TI_SCI_MSG_VALUE_RM_UDMAP_CH_CQ_QNUM_VALID;
+			TI_SCI_MSG_VALUE_RM_UDMAP_CH_CQ_QNUM_VALID |
+			TI_SCI_MSG_VALUE_RM_UDMAP_CH_ATYPE_VALID;
 	req.nav_id = tisci_rm->tisci_dev_id;
 	req.index = tx_chn->udma_tchan_id;
 	if (tx_chn->tx_pause_on_err)
@@ -216,6 +227,7 @@ static int k3_udma_glue_cfg_tx_chn(struct k3_udma_glue_tx_channel *tx_chn)
 		req.tx_supr_tdpkt = 1;
 	req.tx_fetch_size = tx_chn->common.hdesc_size >> 2;
 	req.txcq_qnum = k3_ringacc_get_ring_id(tx_chn->ringtxcq);
+	req.tx_atype = tx_chn->common.atype;
 
 	return tisci_rm->tisci_udmap_ops->tx_ch_cfg(tisci_rm->tisci, &req);
 }
@@ -502,7 +514,8 @@ static int k3_udma_glue_cfg_rx_chn(struct k3_udma_glue_rx_channel *rx_chn)
 			   TI_SCI_MSG_VALUE_RM_UDMAP_CH_CQ_QNUM_VALID |
 			   TI_SCI_MSG_VALUE_RM_UDMAP_CH_CHAN_TYPE_VALID |
 			   TI_SCI_MSG_VALUE_RM_UDMAP_CH_RX_FLOWID_START_VALID |
-			   TI_SCI_MSG_VALUE_RM_UDMAP_CH_RX_FLOWID_CNT_VALID;
+			   TI_SCI_MSG_VALUE_RM_UDMAP_CH_RX_FLOWID_CNT_VALID |
+			   TI_SCI_MSG_VALUE_RM_UDMAP_CH_ATYPE_VALID;
 
 	req.nav_id = tisci_rm->tisci_dev_id;
 	req.index = rx_chn->udma_rchan_id;
@@ -519,6 +532,7 @@ static int k3_udma_glue_cfg_rx_chn(struct k3_udma_glue_rx_channel *rx_chn)
 		req.flowid_cnt = rx_chn->flow_num;
 	}
 	req.rx_chan_type = TI_SCI_RM_UDMAP_CHAN_TYPE_PKT_PBRR;
+	req.rx_atype = rx_chn->common.atype;
 
 	ret = tisci_rm->tisci_udmap_ops->rx_ch_cfg(tisci_rm->tisci, &req);
 	if (ret)
diff --git a/drivers/dma/ti/k3-udma.c b/drivers/dma/ti/k3-udma.c
index 0536866..a9c0251 100644
--- a/drivers/dma/ti/k3-udma.c
+++ b/drivers/dma/ti/k3-udma.c
@@ -149,6 +149,7 @@ struct udma_dev {
 
 	struct udma_chan *channels;
 	u32 psil_base;
+	u32 atype;
 };
 
 struct udma_desc {
@@ -192,6 +193,7 @@ struct udma_chan_config {
 	u32 hdesc_size; /* Size of a packet descriptor in packet mode */
 	bool notdpkt; /* Suppress sending TDC packet */
 	int remote_thread_id;
+	u32 atype;
 	u32 src_thread;
 	u32 dst_thread;
 	enum psil_endpoint_type ep_type;
@@ -1569,7 +1571,8 @@ static int udma_alloc_rx_resources(struct udma_chan *uc)
 	TI_SCI_MSG_VALUE_RM_UDMAP_CH_CHAN_TYPE_VALID |		\
 	TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_SUPR_TDPKT_VALID |	\
 	TI_SCI_MSG_VALUE_RM_UDMAP_CH_FETCH_SIZE_VALID |		\
-	TI_SCI_MSG_VALUE_RM_UDMAP_CH_CQ_QNUM_VALID)
+	TI_SCI_MSG_VALUE_RM_UDMAP_CH_CQ_QNUM_VALID |		\
+	TI_SCI_MSG_VALUE_RM_UDMAP_CH_ATYPE_VALID)
 
 #define TISCI_RCHAN_VALID_PARAMS (				\
 	TI_SCI_MSG_VALUE_RM_UDMAP_CH_PAUSE_ON_ERR_VALID |	\
@@ -1579,7 +1582,8 @@ static int udma_alloc_rx_resources(struct udma_chan *uc)
 	TI_SCI_MSG_VALUE_RM_UDMAP_CH_RX_IGNORE_SHORT_VALID |	\
 	TI_SCI_MSG_VALUE_RM_UDMAP_CH_RX_IGNORE_LONG_VALID |	\
 	TI_SCI_MSG_VALUE_RM_UDMAP_CH_RX_FLOWID_START_VALID |	\
-	TI_SCI_MSG_VALUE_RM_UDMAP_CH_RX_FLOWID_CNT_VALID)
+	TI_SCI_MSG_VALUE_RM_UDMAP_CH_RX_FLOWID_CNT_VALID |	\
+	TI_SCI_MSG_VALUE_RM_UDMAP_CH_ATYPE_VALID)
 
 static int udma_tisci_m2m_channel_config(struct udma_chan *uc)
 {
@@ -1601,6 +1605,7 @@ static int udma_tisci_m2m_channel_config(struct udma_chan *uc)
 	req_tx.tx_chan_type = TI_SCI_RM_UDMAP_CHAN_TYPE_3RDP_BCOPY_PBRR;
 	req_tx.tx_fetch_size = sizeof(struct cppi5_desc_hdr_t) >> 2;
 	req_tx.txcq_qnum = tc_ring;
+	req_tx.tx_atype = ud->atype;
 
 	ret = tisci_ops->tx_ch_cfg(tisci_rm->tisci, &req_tx);
 	if (ret) {
@@ -1614,6 +1619,7 @@ static int udma_tisci_m2m_channel_config(struct udma_chan *uc)
 	req_rx.rx_fetch_size = sizeof(struct cppi5_desc_hdr_t) >> 2;
 	req_rx.rxcq_qnum = tc_ring;
 	req_rx.rx_chan_type = TI_SCI_RM_UDMAP_CHAN_TYPE_3RDP_BCOPY_PBRR;
+	req_rx.rx_atype = ud->atype;
 
 	ret = tisci_ops->rx_ch_cfg(tisci_rm->tisci, &req_rx);
 	if (ret)
@@ -1649,6 +1655,7 @@ static int udma_tisci_tx_channel_config(struct udma_chan *uc)
 	req_tx.tx_supr_tdpkt = uc->config.notdpkt;
 	req_tx.tx_fetch_size = fetch_size >> 2;
 	req_tx.txcq_qnum = tc_ring;
+	req_tx.tx_atype = uc->config.atype;
 
 	ret = tisci_ops->tx_ch_cfg(tisci_rm->tisci, &req_tx);
 	if (ret)
@@ -1685,6 +1692,7 @@ static int udma_tisci_rx_channel_config(struct udma_chan *uc)
 	req_rx.rx_fetch_size =  fetch_size >> 2;
 	req_rx.rxcq_qnum = rx_ring;
 	req_rx.rx_chan_type = mode;
+	req_rx.rx_atype = uc->config.atype;
 
 	ret = tisci_ops->rx_ch_cfg(tisci_rm->tisci, &req_rx);
 	if (ret) {
@@ -3063,13 +3071,18 @@ static void udma_free_chan_resources(struct dma_chan *chan)
 
 static struct platform_driver udma_driver;
 
+struct udma_filter_param {
+	int remote_thread_id;
+	u32 atype;
+};
+
 static bool udma_dma_filter_fn(struct dma_chan *chan, void *param)
 {
 	struct udma_chan_config *ucc;
 	struct psil_endpoint_config *ep_config;
+	struct udma_filter_param *filter_param;
 	struct udma_chan *uc;
 	struct udma_dev *ud;
-	u32 *args;
 
 	if (chan->device->dev->driver != &udma_driver.driver)
 		return false;
@@ -3077,9 +3090,16 @@ static bool udma_dma_filter_fn(struct dma_chan *chan, void *param)
 	uc = to_udma_chan(chan);
 	ucc = &uc->config;
 	ud = uc->ud;
-	args = param;
+	filter_param = param;
 
-	ucc->remote_thread_id = args[0];
+	if (filter_param->atype > 2) {
+		dev_err(ud->dev, "Invalid channel atype: %u\n",
+			filter_param->atype);
+		return false;
+	}
+
+	ucc->remote_thread_id = filter_param->remote_thread_id;
+	ucc->atype = filter_param->atype;
 
 	if (ucc->remote_thread_id & K3_PSIL_DST_THREAD_ID_OFFSET)
 		ucc->dir = DMA_MEM_TO_DEV;
@@ -3092,6 +3112,7 @@ static bool udma_dma_filter_fn(struct dma_chan *chan, void *param)
 			ucc->remote_thread_id);
 		ucc->dir = DMA_MEM_TO_MEM;
 		ucc->remote_thread_id = -1;
+		ucc->atype = 0;
 		return false;
 	}
 
@@ -3130,13 +3151,20 @@ static struct dma_chan *udma_of_xlate(struct of_phandle_args *dma_spec,
 {
 	struct udma_dev *ud = ofdma->of_dma_data;
 	dma_cap_mask_t mask = ud->ddev.cap_mask;
+	struct udma_filter_param filter_param;
 	struct dma_chan *chan;
 
-	if (dma_spec->args_count != 1)
+	if (dma_spec->args_count != 1 && dma_spec->args_count != 2)
 		return NULL;
 
-	chan = __dma_request_channel(&mask, udma_dma_filter_fn,
-				     &dma_spec->args[0], ofdma->of_node);
+	filter_param.remote_thread_id = dma_spec->args[0];
+	if (dma_spec->args_count == 2)
+		filter_param.atype = dma_spec->args[1];
+	else
+		filter_param.atype = 0;
+
+	chan = __dma_request_channel(&mask, udma_dma_filter_fn, &filter_param,
+				     ofdma->of_node);
 	if (!chan) {
 		dev_err(ud->dev, "get channel fail in %s.\n", __func__);
 		return ERR_PTR(-EINVAL);
@@ -3473,6 +3501,66 @@ static int udma_setup_rx_flush(struct udma_dev *ud)
 	return 0;
 }
 
+#ifdef CONFIG_DEBUG_FS
+static void udma_dbg_summary_show_chan(struct seq_file *s,
+				       struct dma_chan *chan)
+{
+	struct udma_chan *uc = to_udma_chan(chan);
+	struct udma_chan_config *ucc = &uc->config;
+
+	seq_printf(s, " %-13s| %s", dma_chan_name(chan),
+		   chan->dbg_client_name ?: "in-use");
+	seq_printf(s, " (%s, ", dmaengine_get_direction_text(uc->config.dir));
+
+	switch (uc->config.dir) {
+	case DMA_MEM_TO_MEM:
+		seq_printf(s, "chan%d pair [0x%04x -> 0x%04x], ", uc->tchan->id,
+			   ucc->src_thread, ucc->dst_thread);
+		break;
+	case DMA_DEV_TO_MEM:
+		seq_printf(s, "rchan%d [0x%04x -> 0x%04x], ", uc->rchan->id,
+			   ucc->src_thread, ucc->dst_thread);
+		break;
+	case DMA_MEM_TO_DEV:
+		seq_printf(s, "tchan%d [0x%04x -> 0x%04x], ", uc->tchan->id,
+			   ucc->src_thread, ucc->dst_thread);
+		break;
+	default:
+		seq_printf(s, ")\n");
+		return;
+	}
+
+	if (ucc->ep_type == PSIL_EP_NATIVE) {
+		seq_printf(s, "PSI-L Native");
+		if (ucc->metadata_size) {
+			seq_printf(s, "[%s", ucc->needs_epib ? " EPIB" : "");
+			if (ucc->psd_size)
+				seq_printf(s, " PSDsize:%u", ucc->psd_size);
+			seq_printf(s, " ]");
+		}
+	} else {
+		seq_printf(s, "PDMA");
+		if (ucc->enable_acc32 || ucc->enable_burst)
+			seq_printf(s, "[%s%s ]",
+				   ucc->enable_acc32 ? " ACC32" : "",
+				   ucc->enable_burst ? " BURST" : "");
+	}
+
+	seq_printf(s, ", %s)\n", ucc->pkt_mode ? "Packet mode" : "TR mode");
+}
+
+static void udma_dbg_summary_show(struct seq_file *s,
+				  struct dma_device *dma_dev)
+{
+	struct dma_chan *chan;
+
+	list_for_each_entry(chan, &dma_dev->channels, device_node) {
+		if (chan->client_count)
+			udma_dbg_summary_show_chan(s, chan);
+	}
+}
+#endif /* CONFIG_DEBUG_FS */
+
 #define TI_UDMAC_BUSWIDTHS	(BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \
 				 BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \
 				 BIT(DMA_SLAVE_BUSWIDTH_3_BYTES) | \
@@ -3519,6 +3607,12 @@ static int udma_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	ret = of_property_read_u32(navss_node, "ti,udma-atype", &ud->atype);
+	if (!ret && ud->atype > 2) {
+		dev_err(dev, "Invalid atype: %u\n", ud->atype);
+		return -EINVAL;
+	}
+
 	ud->tisci_rm.tisci_udmap_ops = &ud->tisci_rm.tisci->ops.rm_udmap_ops;
 	ud->tisci_rm.tisci_psil_ops = &ud->tisci_rm.tisci->ops.rm_psil_ops;
 
@@ -3553,6 +3647,9 @@ static int udma_probe(struct platform_device *pdev)
 	ud->ddev.device_resume = udma_resume;
 	ud->ddev.device_terminate_all = udma_terminate_all;
 	ud->ddev.device_synchronize = udma_synchronize;
+#ifdef CONFIG_DEBUG_FS
+	ud->ddev.dbg_summary_show = udma_dbg_summary_show;
+#endif
 
 	ud->ddev.device_free_chan_resources = udma_free_chan_resources;
 	ud->ddev.src_addr_widths = TI_UDMAC_BUSWIDTHS;
diff --git a/drivers/dma/ti/omap-dma.c b/drivers/dma/ti/omap-dma.c
index a014ab9..918301e 100644
--- a/drivers/dma/ti/omap-dma.c
+++ b/drivers/dma/ti/omap-dma.c
@@ -124,7 +124,7 @@ struct omap_desc {
 	uint32_t csdp;		/* CSDP value */
 
 	unsigned sglen;
-	struct omap_sg sg[0];
+	struct omap_sg sg[];
 };
 
 enum {
diff --git a/drivers/dma/uniphier-mdmac.c b/drivers/dma/uniphier-mdmac.c
index 21b8f11..618839d 100644
--- a/drivers/dma/uniphier-mdmac.c
+++ b/drivers/dma/uniphier-mdmac.c
@@ -68,7 +68,7 @@ struct uniphier_mdmac_device {
 	struct dma_device ddev;
 	struct clk *clk;
 	void __iomem *reg_base;
-	struct uniphier_mdmac_chan channels[0];
+	struct uniphier_mdmac_chan channels[];
 };
 
 static struct uniphier_mdmac_chan *
diff --git a/drivers/dma/uniphier-xdmac.c b/drivers/dma/uniphier-xdmac.c
new file mode 100644
index 0000000..7b2f8a8
--- /dev/null
+++ b/drivers/dma/uniphier-xdmac.c
@@ -0,0 +1,609 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * External DMA controller driver for UniPhier SoCs
+ * Copyright 2019 Socionext Inc.
+ * Author: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+ */
+
+#include <linux/bitops.h>
+#include <linux/bitfield.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_dma.h>
+#include <linux/platform_device.h>
+
+#include "dmaengine.h"
+#include "virt-dma.h"
+
+#define XDMAC_CH_WIDTH		0x100
+
+#define XDMAC_TFA		0x08
+#define XDMAC_TFA_MCNT_MASK	GENMASK(23, 16)
+#define XDMAC_TFA_MASK		GENMASK(5, 0)
+#define XDMAC_SADM		0x10
+#define XDMAC_SADM_STW_MASK	GENMASK(25, 24)
+#define XDMAC_SADM_SAM		BIT(4)
+#define XDMAC_SADM_SAM_FIXED	XDMAC_SADM_SAM
+#define XDMAC_SADM_SAM_INC	0
+#define XDMAC_DADM		0x14
+#define XDMAC_DADM_DTW_MASK	XDMAC_SADM_STW_MASK
+#define XDMAC_DADM_DAM		XDMAC_SADM_SAM
+#define XDMAC_DADM_DAM_FIXED	XDMAC_SADM_SAM_FIXED
+#define XDMAC_DADM_DAM_INC	XDMAC_SADM_SAM_INC
+#define XDMAC_EXSAD		0x18
+#define XDMAC_EXDAD		0x1c
+#define XDMAC_SAD		0x20
+#define XDMAC_DAD		0x24
+#define XDMAC_ITS		0x28
+#define XDMAC_ITS_MASK		GENMASK(25, 0)
+#define XDMAC_TNUM		0x2c
+#define XDMAC_TNUM_MASK		GENMASK(15, 0)
+#define XDMAC_TSS		0x30
+#define XDMAC_TSS_REQ		BIT(0)
+#define XDMAC_IEN		0x34
+#define XDMAC_IEN_ERRIEN	BIT(1)
+#define XDMAC_IEN_ENDIEN	BIT(0)
+#define XDMAC_STAT		0x40
+#define XDMAC_STAT_TENF		BIT(0)
+#define XDMAC_IR		0x44
+#define XDMAC_IR_ERRF		BIT(1)
+#define XDMAC_IR_ENDF		BIT(0)
+#define XDMAC_ID		0x48
+#define XDMAC_ID_ERRIDF		BIT(1)
+#define XDMAC_ID_ENDIDF		BIT(0)
+
+#define XDMAC_MAX_CHANS		16
+#define XDMAC_INTERVAL_CLKS	20
+#define XDMAC_MAX_WORDS		XDMAC_TNUM_MASK
+
+/* cut lower bit for maintain alignment of maximum transfer size */
+#define XDMAC_MAX_WORD_SIZE	(XDMAC_ITS_MASK & ~GENMASK(3, 0))
+
+#define UNIPHIER_XDMAC_BUSWIDTHS \
+	(BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \
+	 BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \
+	 BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) | \
+	 BIT(DMA_SLAVE_BUSWIDTH_8_BYTES))
+
+struct uniphier_xdmac_desc_node {
+	dma_addr_t src;
+	dma_addr_t dst;
+	u32 burst_size;
+	u32 nr_burst;
+};
+
+struct uniphier_xdmac_desc {
+	struct virt_dma_desc vd;
+
+	unsigned int nr_node;
+	unsigned int cur_node;
+	enum dma_transfer_direction dir;
+	struct uniphier_xdmac_desc_node nodes[];
+};
+
+struct uniphier_xdmac_chan {
+	struct virt_dma_chan vc;
+	struct uniphier_xdmac_device *xdev;
+	struct uniphier_xdmac_desc *xd;
+	void __iomem *reg_ch_base;
+	struct dma_slave_config	sconfig;
+	int id;
+	unsigned int req_factor;
+};
+
+struct uniphier_xdmac_device {
+	struct dma_device ddev;
+	void __iomem *reg_base;
+	int nr_chans;
+	struct uniphier_xdmac_chan channels[];
+};
+
+static struct uniphier_xdmac_chan *
+to_uniphier_xdmac_chan(struct virt_dma_chan *vc)
+{
+	return container_of(vc, struct uniphier_xdmac_chan, vc);
+}
+
+static struct uniphier_xdmac_desc *
+to_uniphier_xdmac_desc(struct virt_dma_desc *vd)
+{
+	return container_of(vd, struct uniphier_xdmac_desc, vd);
+}
+
+/* xc->vc.lock must be held by caller */
+static struct uniphier_xdmac_desc *
+uniphier_xdmac_next_desc(struct uniphier_xdmac_chan *xc)
+{
+	struct virt_dma_desc *vd;
+
+	vd = vchan_next_desc(&xc->vc);
+	if (!vd)
+		return NULL;
+
+	list_del(&vd->node);
+
+	return to_uniphier_xdmac_desc(vd);
+}
+
+/* xc->vc.lock must be held by caller */
+static void uniphier_xdmac_chan_start(struct uniphier_xdmac_chan *xc,
+				      struct uniphier_xdmac_desc *xd)
+{
+	u32 src_mode, src_addr, src_width;
+	u32 dst_mode, dst_addr, dst_width;
+	u32 val, its, tnum;
+	enum dma_slave_buswidth buswidth;
+
+	src_addr = xd->nodes[xd->cur_node].src;
+	dst_addr = xd->nodes[xd->cur_node].dst;
+	its      = xd->nodes[xd->cur_node].burst_size;
+	tnum     = xd->nodes[xd->cur_node].nr_burst;
+
+	/*
+	 * The width of MEM side must be 4 or 8 bytes, that does not
+	 * affect that of DEV side and transfer size.
+	 */
+	if (xd->dir == DMA_DEV_TO_MEM) {
+		src_mode = XDMAC_SADM_SAM_FIXED;
+		buswidth = xc->sconfig.src_addr_width;
+	} else {
+		src_mode = XDMAC_SADM_SAM_INC;
+		buswidth = DMA_SLAVE_BUSWIDTH_8_BYTES;
+	}
+	src_width = FIELD_PREP(XDMAC_SADM_STW_MASK, __ffs(buswidth));
+
+	if (xd->dir == DMA_MEM_TO_DEV) {
+		dst_mode = XDMAC_DADM_DAM_FIXED;
+		buswidth = xc->sconfig.dst_addr_width;
+	} else {
+		dst_mode = XDMAC_DADM_DAM_INC;
+		buswidth = DMA_SLAVE_BUSWIDTH_8_BYTES;
+	}
+	dst_width = FIELD_PREP(XDMAC_DADM_DTW_MASK, __ffs(buswidth));
+
+	/* setup transfer factor */
+	val = FIELD_PREP(XDMAC_TFA_MCNT_MASK, XDMAC_INTERVAL_CLKS);
+	val |= FIELD_PREP(XDMAC_TFA_MASK, xc->req_factor);
+	writel(val, xc->reg_ch_base + XDMAC_TFA);
+
+	/* setup the channel */
+	writel(lower_32_bits(src_addr), xc->reg_ch_base + XDMAC_SAD);
+	writel(upper_32_bits(src_addr), xc->reg_ch_base + XDMAC_EXSAD);
+
+	writel(lower_32_bits(dst_addr), xc->reg_ch_base + XDMAC_DAD);
+	writel(upper_32_bits(dst_addr), xc->reg_ch_base + XDMAC_EXDAD);
+
+	src_mode |= src_width;
+	dst_mode |= dst_width;
+	writel(src_mode, xc->reg_ch_base + XDMAC_SADM);
+	writel(dst_mode, xc->reg_ch_base + XDMAC_DADM);
+
+	writel(its, xc->reg_ch_base + XDMAC_ITS);
+	writel(tnum, xc->reg_ch_base + XDMAC_TNUM);
+
+	/* enable interrupt */
+	writel(XDMAC_IEN_ENDIEN | XDMAC_IEN_ERRIEN,
+	       xc->reg_ch_base + XDMAC_IEN);
+
+	/* start XDMAC */
+	val = readl(xc->reg_ch_base + XDMAC_TSS);
+	val |= XDMAC_TSS_REQ;
+	writel(val, xc->reg_ch_base + XDMAC_TSS);
+}
+
+/* xc->vc.lock must be held by caller */
+static int uniphier_xdmac_chan_stop(struct uniphier_xdmac_chan *xc)
+{
+	u32 val;
+
+	/* disable interrupt */
+	val = readl(xc->reg_ch_base + XDMAC_IEN);
+	val &= ~(XDMAC_IEN_ENDIEN | XDMAC_IEN_ERRIEN);
+	writel(val, xc->reg_ch_base + XDMAC_IEN);
+
+	/* stop XDMAC */
+	val = readl(xc->reg_ch_base + XDMAC_TSS);
+	val &= ~XDMAC_TSS_REQ;
+	writel(0, xc->reg_ch_base + XDMAC_TSS);
+
+	/* wait until transfer is stopped */
+	return readl_poll_timeout(xc->reg_ch_base + XDMAC_STAT, val,
+				  !(val & XDMAC_STAT_TENF), 100, 1000);
+}
+
+/* xc->vc.lock must be held by caller */
+static void uniphier_xdmac_start(struct uniphier_xdmac_chan *xc)
+{
+	struct uniphier_xdmac_desc *xd;
+
+	xd = uniphier_xdmac_next_desc(xc);
+	if (xd)
+		uniphier_xdmac_chan_start(xc, xd);
+
+	/* set desc to chan regardless of xd is null */
+	xc->xd = xd;
+}
+
+static void uniphier_xdmac_chan_irq(struct uniphier_xdmac_chan *xc)
+{
+	u32 stat;
+	int ret;
+
+	spin_lock(&xc->vc.lock);
+
+	stat = readl(xc->reg_ch_base + XDMAC_ID);
+
+	if (stat & XDMAC_ID_ERRIDF) {
+		ret = uniphier_xdmac_chan_stop(xc);
+		if (ret)
+			dev_err(xc->xdev->ddev.dev,
+				"DMA transfer error with aborting issue\n");
+		else
+			dev_err(xc->xdev->ddev.dev,
+				"DMA transfer error\n");
+
+	} else if ((stat & XDMAC_ID_ENDIDF) && xc->xd) {
+		xc->xd->cur_node++;
+		if (xc->xd->cur_node >= xc->xd->nr_node) {
+			vchan_cookie_complete(&xc->xd->vd);
+			uniphier_xdmac_start(xc);
+		} else {
+			uniphier_xdmac_chan_start(xc, xc->xd);
+		}
+	}
+
+	/* write bits to clear */
+	writel(stat, xc->reg_ch_base + XDMAC_IR);
+
+	spin_unlock(&xc->vc.lock);
+}
+
+static irqreturn_t uniphier_xdmac_irq_handler(int irq, void *dev_id)
+{
+	struct uniphier_xdmac_device *xdev = dev_id;
+	int i;
+
+	for (i = 0; i < xdev->nr_chans; i++)
+		uniphier_xdmac_chan_irq(&xdev->channels[i]);
+
+	return IRQ_HANDLED;
+}
+
+static void uniphier_xdmac_free_chan_resources(struct dma_chan *chan)
+{
+	vchan_free_chan_resources(to_virt_chan(chan));
+}
+
+static struct dma_async_tx_descriptor *
+uniphier_xdmac_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst,
+			       dma_addr_t src, size_t len, unsigned long flags)
+{
+	struct virt_dma_chan *vc = to_virt_chan(chan);
+	struct uniphier_xdmac_desc *xd;
+	unsigned int nr;
+	size_t burst_size, tlen;
+	int i;
+
+	if (len > XDMAC_MAX_WORD_SIZE * XDMAC_MAX_WORDS)
+		return NULL;
+
+	nr = 1 + len / XDMAC_MAX_WORD_SIZE;
+
+	xd = kzalloc(struct_size(xd, nodes, nr), GFP_NOWAIT);
+	if (!xd)
+		return NULL;
+
+	for (i = 0; i < nr; i++) {
+		burst_size = min_t(size_t, len, XDMAC_MAX_WORD_SIZE);
+		xd->nodes[i].src = src;
+		xd->nodes[i].dst = dst;
+		xd->nodes[i].burst_size = burst_size;
+		xd->nodes[i].nr_burst = len / burst_size;
+		tlen = rounddown(len, burst_size);
+		src += tlen;
+		dst += tlen;
+		len -= tlen;
+	}
+
+	xd->dir = DMA_MEM_TO_MEM;
+	xd->nr_node = nr;
+	xd->cur_node = 0;
+
+	return vchan_tx_prep(vc, &xd->vd, flags);
+}
+
+static struct dma_async_tx_descriptor *
+uniphier_xdmac_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
+			     unsigned int sg_len,
+			     enum dma_transfer_direction direction,
+			     unsigned long flags, void *context)
+{
+	struct virt_dma_chan *vc = to_virt_chan(chan);
+	struct uniphier_xdmac_chan *xc = to_uniphier_xdmac_chan(vc);
+	struct uniphier_xdmac_desc *xd;
+	struct scatterlist *sg;
+	enum dma_slave_buswidth buswidth;
+	u32 maxburst;
+	int i;
+
+	if (!is_slave_direction(direction))
+		return NULL;
+
+	if (direction == DMA_DEV_TO_MEM) {
+		buswidth = xc->sconfig.src_addr_width;
+		maxburst = xc->sconfig.src_maxburst;
+	} else {
+		buswidth = xc->sconfig.dst_addr_width;
+		maxburst = xc->sconfig.dst_maxburst;
+	}
+
+	if (!maxburst)
+		maxburst = 1;
+	if (maxburst > xc->xdev->ddev.max_burst) {
+		dev_err(xc->xdev->ddev.dev,
+			"Exceed maximum number of burst words\n");
+		return NULL;
+	}
+
+	xd = kzalloc(struct_size(xd, nodes, sg_len), GFP_NOWAIT);
+	if (!xd)
+		return NULL;
+
+	for_each_sg(sgl, sg, sg_len, i) {
+		xd->nodes[i].src = (direction == DMA_DEV_TO_MEM)
+			? xc->sconfig.src_addr : sg_dma_address(sg);
+		xd->nodes[i].dst = (direction == DMA_MEM_TO_DEV)
+			? xc->sconfig.dst_addr : sg_dma_address(sg);
+		xd->nodes[i].burst_size = maxburst * buswidth;
+		xd->nodes[i].nr_burst =
+			sg_dma_len(sg) / xd->nodes[i].burst_size;
+
+		/*
+		 * Currently transfer that size doesn't align the unit size
+		 * (the number of burst words * bus-width) is not allowed,
+		 * because the driver does not support the way to transfer
+		 * residue size. As a matter of fact, in order to transfer
+		 * arbitrary size, 'src_maxburst' or 'dst_maxburst' of
+		 * dma_slave_config must be 1.
+		 */
+		if (sg_dma_len(sg) % xd->nodes[i].burst_size) {
+			dev_err(xc->xdev->ddev.dev,
+				"Unaligned transfer size: %d", sg_dma_len(sg));
+			kfree(xd);
+			return NULL;
+		}
+
+		if (xd->nodes[i].nr_burst > XDMAC_MAX_WORDS) {
+			dev_err(xc->xdev->ddev.dev,
+				"Exceed maximum transfer size");
+			kfree(xd);
+			return NULL;
+		}
+	}
+
+	xd->dir = direction;
+	xd->nr_node = sg_len;
+	xd->cur_node = 0;
+
+	return vchan_tx_prep(vc, &xd->vd, flags);
+}
+
+static int uniphier_xdmac_slave_config(struct dma_chan *chan,
+				       struct dma_slave_config *config)
+{
+	struct virt_dma_chan *vc = to_virt_chan(chan);
+	struct uniphier_xdmac_chan *xc = to_uniphier_xdmac_chan(vc);
+
+	memcpy(&xc->sconfig, config, sizeof(*config));
+
+	return 0;
+}
+
+static int uniphier_xdmac_terminate_all(struct dma_chan *chan)
+{
+	struct virt_dma_chan *vc = to_virt_chan(chan);
+	struct uniphier_xdmac_chan *xc = to_uniphier_xdmac_chan(vc);
+	unsigned long flags;
+	int ret = 0;
+	LIST_HEAD(head);
+
+	spin_lock_irqsave(&vc->lock, flags);
+
+	if (xc->xd) {
+		vchan_terminate_vdesc(&xc->xd->vd);
+		xc->xd = NULL;
+		ret = uniphier_xdmac_chan_stop(xc);
+	}
+
+	vchan_get_all_descriptors(vc, &head);
+
+	spin_unlock_irqrestore(&vc->lock, flags);
+
+	vchan_dma_desc_free_list(vc, &head);
+
+	return ret;
+}
+
+static void uniphier_xdmac_synchronize(struct dma_chan *chan)
+{
+	vchan_synchronize(to_virt_chan(chan));
+}
+
+static void uniphier_xdmac_issue_pending(struct dma_chan *chan)
+{
+	struct virt_dma_chan *vc = to_virt_chan(chan);
+	struct uniphier_xdmac_chan *xc = to_uniphier_xdmac_chan(vc);
+	unsigned long flags;
+
+	spin_lock_irqsave(&vc->lock, flags);
+
+	if (vchan_issue_pending(vc) && !xc->xd)
+		uniphier_xdmac_start(xc);
+
+	spin_unlock_irqrestore(&vc->lock, flags);
+}
+
+static void uniphier_xdmac_desc_free(struct virt_dma_desc *vd)
+{
+	kfree(to_uniphier_xdmac_desc(vd));
+}
+
+static void uniphier_xdmac_chan_init(struct uniphier_xdmac_device *xdev,
+				     int ch)
+{
+	struct uniphier_xdmac_chan *xc = &xdev->channels[ch];
+
+	xc->xdev = xdev;
+	xc->reg_ch_base = xdev->reg_base + XDMAC_CH_WIDTH * ch;
+	xc->vc.desc_free = uniphier_xdmac_desc_free;
+
+	vchan_init(&xc->vc, &xdev->ddev);
+}
+
+static struct dma_chan *of_dma_uniphier_xlate(struct of_phandle_args *dma_spec,
+					      struct of_dma *ofdma)
+{
+	struct uniphier_xdmac_device *xdev = ofdma->of_dma_data;
+	int chan_id = dma_spec->args[0];
+
+	if (chan_id >= xdev->nr_chans)
+		return NULL;
+
+	xdev->channels[chan_id].id = chan_id;
+	xdev->channels[chan_id].req_factor = dma_spec->args[1];
+
+	return dma_get_slave_channel(&xdev->channels[chan_id].vc.chan);
+}
+
+static int uniphier_xdmac_probe(struct platform_device *pdev)
+{
+	struct uniphier_xdmac_device *xdev;
+	struct device *dev = &pdev->dev;
+	struct dma_device *ddev;
+	int irq;
+	int nr_chans;
+	int i, ret;
+
+	if (of_property_read_u32(dev->of_node, "dma-channels", &nr_chans))
+		return -EINVAL;
+	if (nr_chans > XDMAC_MAX_CHANS)
+		nr_chans = XDMAC_MAX_CHANS;
+
+	xdev = devm_kzalloc(dev, struct_size(xdev, channels, nr_chans),
+			    GFP_KERNEL);
+	if (!xdev)
+		return -ENOMEM;
+
+	xdev->nr_chans = nr_chans;
+	xdev->reg_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(xdev->reg_base))
+		return PTR_ERR(xdev->reg_base);
+
+	ddev = &xdev->ddev;
+	ddev->dev = dev;
+	dma_cap_zero(ddev->cap_mask);
+	dma_cap_set(DMA_MEMCPY, ddev->cap_mask);
+	dma_cap_set(DMA_SLAVE, ddev->cap_mask);
+	ddev->src_addr_widths = UNIPHIER_XDMAC_BUSWIDTHS;
+	ddev->dst_addr_widths = UNIPHIER_XDMAC_BUSWIDTHS;
+	ddev->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV) |
+			   BIT(DMA_MEM_TO_MEM);
+	ddev->residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
+	ddev->max_burst = XDMAC_MAX_WORDS;
+	ddev->device_free_chan_resources = uniphier_xdmac_free_chan_resources;
+	ddev->device_prep_dma_memcpy = uniphier_xdmac_prep_dma_memcpy;
+	ddev->device_prep_slave_sg = uniphier_xdmac_prep_slave_sg;
+	ddev->device_config = uniphier_xdmac_slave_config;
+	ddev->device_terminate_all = uniphier_xdmac_terminate_all;
+	ddev->device_synchronize = uniphier_xdmac_synchronize;
+	ddev->device_tx_status = dma_cookie_status;
+	ddev->device_issue_pending = uniphier_xdmac_issue_pending;
+	INIT_LIST_HEAD(&ddev->channels);
+
+	for (i = 0; i < nr_chans; i++)
+		uniphier_xdmac_chan_init(xdev, i);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	ret = devm_request_irq(dev, irq, uniphier_xdmac_irq_handler,
+			       IRQF_SHARED, "xdmac", xdev);
+	if (ret) {
+		dev_err(dev, "Failed to request IRQ\n");
+		return ret;
+	}
+
+	ret = dma_async_device_register(ddev);
+	if (ret) {
+		dev_err(dev, "Failed to register XDMA device\n");
+		return ret;
+	}
+
+	ret = of_dma_controller_register(dev->of_node,
+					 of_dma_uniphier_xlate, xdev);
+	if (ret) {
+		dev_err(dev, "Failed to register XDMA controller\n");
+		goto out_unregister_dmac;
+	}
+
+	platform_set_drvdata(pdev, xdev);
+
+	dev_info(&pdev->dev, "UniPhier XDMAC driver (%d channels)\n",
+		 nr_chans);
+
+	return 0;
+
+out_unregister_dmac:
+	dma_async_device_unregister(ddev);
+
+	return ret;
+}
+
+static int uniphier_xdmac_remove(struct platform_device *pdev)
+{
+	struct uniphier_xdmac_device *xdev = platform_get_drvdata(pdev);
+	struct dma_device *ddev = &xdev->ddev;
+	struct dma_chan *chan;
+	int ret;
+
+	/*
+	 * Before reaching here, almost all descriptors have been freed by the
+	 * ->device_free_chan_resources() hook. However, each channel might
+	 * be still holding one descriptor that was on-flight at that moment.
+	 * Terminate it to make sure this hardware is no longer running. Then,
+	 * free the channel resources once again to avoid memory leak.
+	 */
+	list_for_each_entry(chan, &ddev->channels, device_node) {
+		ret = dmaengine_terminate_sync(chan);
+		if (ret)
+			return ret;
+		uniphier_xdmac_free_chan_resources(chan);
+	}
+
+	of_dma_controller_free(pdev->dev.of_node);
+	dma_async_device_unregister(ddev);
+
+	return 0;
+}
+
+static const struct of_device_id uniphier_xdmac_match[] = {
+	{ .compatible = "socionext,uniphier-xdmac" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, uniphier_xdmac_match);
+
+static struct platform_driver uniphier_xdmac_driver = {
+	.probe = uniphier_xdmac_probe,
+	.remove = uniphier_xdmac_remove,
+	.driver = {
+		.name = "uniphier-xdmac",
+		.of_match_table = uniphier_xdmac_match,
+	},
+};
+module_platform_driver(uniphier_xdmac_driver);
+
+MODULE_AUTHOR("Kunihiko Hayashi <hayashi.kunihiko@socionext.com>");
+MODULE_DESCRIPTION("UniPhier external DMA controller driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
index a9c5d5c..aecd5a3 100644
--- a/drivers/dma/xilinx/xilinx_dma.c
+++ b/drivers/dma/xilinx/xilinx_dma.c
@@ -125,7 +125,9 @@
 #define XILINX_VDMA_ENABLE_VERTICAL_FLIP	BIT(0)
 
 /* HW specific definitions */
-#define XILINX_DMA_MAX_CHANS_PER_DEVICE	0x20
+#define XILINX_MCDMA_MAX_CHANS_PER_DEVICE	0x20
+#define XILINX_DMA_MAX_CHANS_PER_DEVICE		0x2
+#define XILINX_CDMA_MAX_CHANS_PER_DEVICE	0x1
 
 #define XILINX_DMA_DMAXR_ALL_IRQ_MASK	\
 		(XILINX_DMA_DMASR_FRM_CNT_IRQ | \
@@ -468,6 +470,7 @@ struct xilinx_dma_config {
 			struct clk **tx_clk, struct clk **txs_clk,
 			struct clk **rx_clk, struct clk **rxs_clk);
 	irqreturn_t (*irq_handler)(int irq, void *data);
+	const int max_channels;
 };
 
 /**
@@ -485,16 +488,15 @@ struct xilinx_dma_config {
  * @txs_clk: DMA mm2s stream clock
  * @rx_clk: DMA s2mm clock
  * @rxs_clk: DMA s2mm stream clock
- * @nr_channels: Number of channels DMA device supports
- * @chan_id: DMA channel identifier
+ * @s2mm_chan_id: DMA s2mm channel identifier
+ * @mm2s_chan_id: DMA mm2s channel identifier
  * @max_buffer_len: Max buffer length
- * @s2mm_index: S2MM channel index
  */
 struct xilinx_dma_device {
 	void __iomem *regs;
 	struct device *dev;
 	struct dma_device common;
-	struct xilinx_dma_chan *chan[XILINX_DMA_MAX_CHANS_PER_DEVICE];
+	struct xilinx_dma_chan *chan[XILINX_MCDMA_MAX_CHANS_PER_DEVICE];
 	u32 flush_on_fsync;
 	bool ext_addr;
 	struct platform_device  *pdev;
@@ -504,10 +506,9 @@ struct xilinx_dma_device {
 	struct clk *txs_clk;
 	struct clk *rx_clk;
 	struct clk *rxs_clk;
-	u32 nr_channels;
-	u32 chan_id;
+	u32 s2mm_chan_id;
+	u32 mm2s_chan_id;
 	u32 max_buffer_len;
-	u32 s2mm_index;
 };
 
 /* Macros */
@@ -1745,7 +1746,7 @@ static irqreturn_t xilinx_mcdma_irq_handler(int irq, void *data)
 		return IRQ_NONE;
 
 	if (chan->direction == DMA_DEV_TO_MEM)
-		chan_offset = chan->xdev->s2mm_index;
+		chan_offset = chan->xdev->dma_config->max_channels / 2;
 
 	chan_offset = chan_offset + (chan_id - 1);
 	chan = chan->xdev->chan[chan_offset];
@@ -2404,16 +2405,17 @@ static int xilinx_dma_terminate_all(struct dma_chan *dchan)
 	u32 reg;
 	int err;
 
-	if (chan->cyclic)
-		xilinx_dma_chan_reset(chan);
-
-	err = chan->stop_transfer(chan);
-	if (err) {
-		dev_err(chan->dev, "Cannot stop channel %p: %x\n",
-			chan, dma_ctrl_read(chan, XILINX_DMA_REG_DMASR));
-		chan->err = true;
+	if (!chan->cyclic) {
+		err = chan->stop_transfer(chan);
+		if (err) {
+			dev_err(chan->dev, "Cannot stop channel %p: %x\n",
+				chan, dma_ctrl_read(chan,
+				XILINX_DMA_REG_DMASR));
+			chan->err = true;
+		}
 	}
 
+	xilinx_dma_chan_reset(chan);
 	/* Remove and free all of the descriptors in the lists */
 	xilinx_dma_free_descriptors(chan);
 	chan->idle = true;
@@ -2730,12 +2732,11 @@ static void xdma_disable_allclks(struct xilinx_dma_device *xdev)
  *
  * @xdev: Driver specific device structure
  * @node: Device node
- * @chan_id: DMA Channel id
  *
  * Return: '0' on success and failure value on error
  */
 static int xilinx_dma_chan_probe(struct xilinx_dma_device *xdev,
-				  struct device_node *node, int chan_id)
+				  struct device_node *node)
 {
 	struct xilinx_dma_chan *chan;
 	bool has_dre = false;
@@ -2787,8 +2788,8 @@ static int xilinx_dma_chan_probe(struct xilinx_dma_device *xdev,
 	    of_device_is_compatible(node, "xlnx,axi-dma-mm2s-channel") ||
 	    of_device_is_compatible(node, "xlnx,axi-cdma-channel")) {
 		chan->direction = DMA_MEM_TO_DEV;
-		chan->id = chan_id;
-		chan->tdest = chan_id;
+		chan->id = xdev->mm2s_chan_id++;
+		chan->tdest = chan->id;
 
 		chan->ctrl_offset = XILINX_DMA_MM2S_CTRL_OFFSET;
 		if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
@@ -2804,9 +2805,8 @@ static int xilinx_dma_chan_probe(struct xilinx_dma_device *xdev,
 		   of_device_is_compatible(node,
 					   "xlnx,axi-dma-s2mm-channel")) {
 		chan->direction = DMA_DEV_TO_MEM;
-		chan->id = chan_id;
-		xdev->s2mm_index = xdev->nr_channels;
-		chan->tdest = chan_id - xdev->nr_channels;
+		chan->id = xdev->s2mm_chan_id++;
+		chan->tdest = chan->id - xdev->dma_config->max_channels / 2;
 		chan->has_vflip = of_property_read_bool(node,
 					"xlnx,enable-vert-flip");
 		if (chan->has_vflip) {
@@ -2908,9 +2908,7 @@ static int xilinx_dma_child_probe(struct xilinx_dma_device *xdev,
 		dev_warn(xdev->dev, "missing dma-channels property\n");
 
 	for (i = 0; i < nr_channels; i++)
-		xilinx_dma_chan_probe(xdev, node, xdev->chan_id++);
-
-	xdev->nr_channels += nr_channels;
+		xilinx_dma_chan_probe(xdev, node);
 
 	return 0;
 }
@@ -2928,7 +2926,7 @@ static struct dma_chan *of_dma_xilinx_xlate(struct of_phandle_args *dma_spec,
 	struct xilinx_dma_device *xdev = ofdma->of_dma_data;
 	int chan_id = dma_spec->args[0];
 
-	if (chan_id >= xdev->nr_channels || !xdev->chan[chan_id])
+	if (chan_id >= xdev->dma_config->max_channels || !xdev->chan[chan_id])
 		return NULL;
 
 	return dma_get_slave_channel(&xdev->chan[chan_id]->common);
@@ -2938,23 +2936,27 @@ static const struct xilinx_dma_config axidma_config = {
 	.dmatype = XDMA_TYPE_AXIDMA,
 	.clk_init = axidma_clk_init,
 	.irq_handler = xilinx_dma_irq_handler,
+	.max_channels = XILINX_DMA_MAX_CHANS_PER_DEVICE,
 };
 
 static const struct xilinx_dma_config aximcdma_config = {
 	.dmatype = XDMA_TYPE_AXIMCDMA,
 	.clk_init = axidma_clk_init,
 	.irq_handler = xilinx_mcdma_irq_handler,
+	.max_channels = XILINX_MCDMA_MAX_CHANS_PER_DEVICE,
 };
 static const struct xilinx_dma_config axicdma_config = {
 	.dmatype = XDMA_TYPE_CDMA,
 	.clk_init = axicdma_clk_init,
 	.irq_handler = xilinx_dma_irq_handler,
+	.max_channels = XILINX_CDMA_MAX_CHANS_PER_DEVICE,
 };
 
 static const struct xilinx_dma_config axivdma_config = {
 	.dmatype = XDMA_TYPE_VDMA,
 	.clk_init = axivdma_clk_init,
 	.irq_handler = xilinx_dma_irq_handler,
+	.max_channels = XILINX_DMA_MAX_CHANS_PER_DEVICE,
 };
 
 static const struct of_device_id xilinx_dma_of_ids[] = {
@@ -3011,6 +3013,7 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 
 	/* Retrieve the DMA engine properties from the device tree */
 	xdev->max_buffer_len = GENMASK(XILINX_DMA_MAX_TRANS_LEN_MAX - 1, 0);
+	xdev->s2mm_chan_id = xdev->dma_config->max_channels / 2;
 
 	if (xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA ||
 	    xdev->dma_config->dmatype == XDMA_TYPE_AXIMCDMA) {
@@ -3104,7 +3107,7 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 	}
 
 	if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
-		for (i = 0; i < xdev->nr_channels; i++)
+		for (i = 0; i < xdev->dma_config->max_channels; i++)
 			if (xdev->chan[i])
 				xdev->chan[i]->num_frms = num_frames;
 	}
@@ -3134,7 +3137,7 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 disable_clks:
 	xdma_disable_allclks(xdev);
 error:
-	for (i = 0; i < xdev->nr_channels; i++)
+	for (i = 0; i < xdev->dma_config->max_channels; i++)
 		if (xdev->chan[i])
 			xilinx_dma_chan_remove(xdev->chan[i]);
 
@@ -3156,7 +3159,7 @@ static int xilinx_dma_remove(struct platform_device *pdev)
 
 	dma_async_device_unregister(&xdev->common);
 
-	for (i = 0; i < xdev->nr_channels; i++)
+	for (i = 0; i < xdev->dma_config->max_channels; i++)
 		if (xdev->chan[i])
 			xilinx_dma_chan_remove(xdev->chan[i]);
 
diff --git a/drivers/eisa/.gitignore b/drivers/eisa/.gitignore
index 4b335c0..7d0a2ad 100644
--- a/drivers/eisa/.gitignore
+++ b/drivers/eisa/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 devlist.h
diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c
index 34b7aff..5253453 100644
--- a/drivers/extcon/extcon-axp288.c
+++ b/drivers/extcon/extcon-axp288.c
@@ -443,9 +443,40 @@ static int axp288_extcon_probe(struct platform_device *pdev)
 	/* Start charger cable type detection */
 	axp288_extcon_enable(info);
 
+	device_init_wakeup(dev, true);
+	platform_set_drvdata(pdev, info);
+
 	return 0;
 }
 
+static int __maybe_unused axp288_extcon_suspend(struct device *dev)
+{
+	struct axp288_extcon_info *info = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		enable_irq_wake(info->irq[VBUS_RISING_IRQ]);
+
+	return 0;
+}
+
+static int __maybe_unused axp288_extcon_resume(struct device *dev)
+{
+	struct axp288_extcon_info *info = dev_get_drvdata(dev);
+
+	/*
+	 * Wakeup when a charger is connected to do charger-type
+	 * connection and generate an extcon event which makes the
+	 * axp288 charger driver set the input current limit.
+	 */
+	if (device_may_wakeup(dev))
+		disable_irq_wake(info->irq[VBUS_RISING_IRQ]);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(axp288_extcon_pm_ops, axp288_extcon_suspend,
+			 axp288_extcon_resume);
+
 static const struct platform_device_id axp288_extcon_table[] = {
 	{ .name = "axp288_extcon" },
 	{},
@@ -457,6 +488,7 @@ static struct platform_driver axp288_extcon_driver = {
 	.id_table = axp288_extcon_table,
 	.driver = {
 		.name = "axp288_extcon",
+		.pm = &axp288_extcon_pm_ops,
 	},
 };
 
diff --git a/drivers/extcon/extcon-palmas.c b/drivers/extcon/extcon-palmas.c
index edc5016..cea58d0c 100644
--- a/drivers/extcon/extcon-palmas.c
+++ b/drivers/extcon/extcon-palmas.c
@@ -205,14 +205,18 @@ static int palmas_usb_probe(struct platform_device *pdev)
 
 	palmas_usb->id_gpiod = devm_gpiod_get_optional(&pdev->dev, "id",
 							GPIOD_IN);
-	if (IS_ERR(palmas_usb->id_gpiod)) {
+	if (PTR_ERR(palmas_usb->id_gpiod) == -EPROBE_DEFER) {
+		return -EPROBE_DEFER;
+	} else if (IS_ERR(palmas_usb->id_gpiod)) {
 		dev_err(&pdev->dev, "failed to get id gpio\n");
 		return PTR_ERR(palmas_usb->id_gpiod);
 	}
 
 	palmas_usb->vbus_gpiod = devm_gpiod_get_optional(&pdev->dev, "vbus",
 							GPIOD_IN);
-	if (IS_ERR(palmas_usb->vbus_gpiod)) {
+	if (PTR_ERR(palmas_usb->vbus_gpiod) == -EPROBE_DEFER) {
+		return -EPROBE_DEFER;
+	} else if (IS_ERR(palmas_usb->vbus_gpiod)) {
 		dev_err(&pdev->dev, "failed to get vbus gpio\n");
 		return PTR_ERR(palmas_usb->vbus_gpiod);
 	}
diff --git a/drivers/extcon/extcon.c b/drivers/extcon/extcon.c
index e055893..2dfbfec 100644
--- a/drivers/extcon/extcon.c
+++ b/drivers/extcon/extcon.c
@@ -1406,6 +1406,7 @@ const char *extcon_get_edev_name(struct extcon_dev *edev)
 {
 	return !edev ? NULL : edev->name;
 }
+EXPORT_SYMBOL_GPL(extcon_get_edev_name);
 
 static int __init extcon_class_init(void)
 {
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index ea869ad..8007d4a 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -206,7 +206,7 @@
 
 config INTEL_STRATIX10_SERVICE
 	tristate "Intel Stratix10 Service Layer"
-	depends on ARCH_STRATIX10 && HAVE_ARM_SMCCC
+	depends on (ARCH_STRATIX10 || ARCH_AGILEX) && HAVE_ARM_SMCCC
 	default n
 	help
 	  Intel Stratix10 service layer runs at privileged exception level,
diff --git a/drivers/firmware/arm_scmi/Makefile b/drivers/firmware/arm_scmi/Makefile
index 5f298f0..6694d0d 100644
--- a/drivers/firmware/arm_scmi/Makefile
+++ b/drivers/firmware/arm_scmi/Makefile
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
-obj-y	= scmi-bus.o scmi-driver.o scmi-protocols.o
+obj-y	= scmi-bus.o scmi-driver.o scmi-protocols.o scmi-transport.o
 scmi-bus-y = bus.o
 scmi-driver-y = driver.o
+scmi-transport-y = mailbox.o shmem.o
 scmi-protocols-y = base.o clock.o perf.o power.o reset.o sensors.o
 obj-$(CONFIG_ARM_SCMI_POWER_DOMAIN) += scmi_pm_domain.o
diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h
index df35358..5ac0646 100644
--- a/drivers/firmware/arm_scmi/common.h
+++ b/drivers/firmware/arm_scmi/common.h
@@ -33,8 +33,8 @@ enum scmi_common_cmd {
 /**
  * struct scmi_msg_resp_prot_version - Response for a message
  *
- * @major_version: Major version of the ABI that firmware supports
  * @minor_version: Minor version of the ABI that firmware supports
+ * @major_version: Major version of the ABI that firmware supports
  *
  * In general, ABI version changes follow the rule that minor version increments
  * are backward compatible. Major revision changes in ABI may not be
@@ -47,6 +47,19 @@ struct scmi_msg_resp_prot_version {
 	__le16 major_version;
 };
 
+#define MSG_ID_MASK		GENMASK(7, 0)
+#define MSG_XTRACT_ID(hdr)	FIELD_GET(MSG_ID_MASK, (hdr))
+#define MSG_TYPE_MASK		GENMASK(9, 8)
+#define MSG_XTRACT_TYPE(hdr)	FIELD_GET(MSG_TYPE_MASK, (hdr))
+#define MSG_TYPE_COMMAND	0
+#define MSG_TYPE_DELAYED_RESP	2
+#define MSG_TYPE_NOTIFICATION	3
+#define MSG_PROTOCOL_ID_MASK	GENMASK(17, 10)
+#define MSG_XTRACT_PROT_ID(hdr)	FIELD_GET(MSG_PROTOCOL_ID_MASK, (hdr))
+#define MSG_TOKEN_ID_MASK	GENMASK(27, 18)
+#define MSG_XTRACT_TOKEN(hdr)	FIELD_GET(MSG_TOKEN_ID_MASK, (hdr))
+#define MSG_TOKEN_MAX		(MSG_XTRACT_TOKEN(MSG_TOKEN_ID_MASK) + 1)
+
 /**
  * struct scmi_msg_hdr - Message(Tx/Rx) header
  *
@@ -68,6 +81,33 @@ struct scmi_msg_hdr {
 };
 
 /**
+ * pack_scmi_header() - packs and returns 32-bit header
+ *
+ * @hdr: pointer to header containing all the information on message id,
+ *	protocol id and sequence id.
+ *
+ * Return: 32-bit packed message header to be sent to the platform.
+ */
+static inline u32 pack_scmi_header(struct scmi_msg_hdr *hdr)
+{
+	return FIELD_PREP(MSG_ID_MASK, hdr->id) |
+		FIELD_PREP(MSG_TOKEN_ID_MASK, hdr->seq) |
+		FIELD_PREP(MSG_PROTOCOL_ID_MASK, hdr->protocol_id);
+}
+
+/**
+ * unpack_scmi_header() - unpacks and records message and protocol id
+ *
+ * @msg_hdr: 32-bit packed message header sent from the platform
+ * @hdr: pointer to header to fetch message and protocol id.
+ */
+static inline void unpack_scmi_header(u32 msg_hdr, struct scmi_msg_hdr *hdr)
+{
+	hdr->id = MSG_XTRACT_ID(msg_hdr);
+	hdr->protocol_id = MSG_XTRACT_PROT_ID(msg_hdr);
+}
+
+/**
  * struct scmi_msg - Message(Tx/Rx) structure
  *
  * @buf: Buffer pointer
@@ -88,7 +128,7 @@ struct scmi_msg {
  *	message. If request-ACK protocol is used, we can reuse the same
  *	buffer for the rx path as we use for the tx path.
  * @done: command message transmit completion event
- * @async: pointer to delayed response message received event completion
+ * @async_done: pointer to delayed response message received event completion
  */
 struct scmi_xfer {
 	int transfer_id;
@@ -113,3 +153,74 @@ void scmi_setup_protocol_implemented(const struct scmi_handle *handle,
 				     u8 *prot_imp);
 
 int scmi_base_protocol_init(struct scmi_handle *h);
+
+/* SCMI Transport */
+/**
+ * struct scmi_chan_info - Structure representing a SCMI channel information
+ *
+ * @dev: Reference to device in the SCMI hierarchy corresponding to this
+ *	 channel
+ * @handle: Pointer to SCMI entity handle
+ * @transport_info: Transport layer related information
+ */
+struct scmi_chan_info {
+	struct device *dev;
+	struct scmi_handle *handle;
+	void *transport_info;
+};
+
+/**
+ * struct scmi_transport_ops - Structure representing a SCMI transport ops
+ *
+ * @chan_available: Callback to check if channel is available or not
+ * @chan_setup: Callback to allocate and setup a channel
+ * @chan_free: Callback to free a channel
+ * @send_message: Callback to send a message
+ * @mark_txdone: Callback to mark tx as done
+ * @fetch_response: Callback to fetch response
+ * @poll_done: Callback to poll transfer status
+ */
+struct scmi_transport_ops {
+	bool (*chan_available)(struct device *dev, int idx);
+	int (*chan_setup)(struct scmi_chan_info *cinfo, struct device *dev,
+			  bool tx);
+	int (*chan_free)(int id, void *p, void *data);
+	int (*send_message)(struct scmi_chan_info *cinfo,
+			    struct scmi_xfer *xfer);
+	void (*mark_txdone)(struct scmi_chan_info *cinfo, int ret);
+	void (*fetch_response)(struct scmi_chan_info *cinfo,
+			       struct scmi_xfer *xfer);
+	bool (*poll_done)(struct scmi_chan_info *cinfo, struct scmi_xfer *xfer);
+};
+
+/**
+ * struct scmi_desc - Description of SoC integration
+ *
+ * @ops: Pointer to the transport specific ops structure
+ * @max_rx_timeout_ms: Timeout for communication with SoC (in Milliseconds)
+ * @max_msg: Maximum number of messages that can be pending
+ *	simultaneously in the system
+ * @max_msg_size: Maximum size of data per message that can be handled.
+ */
+struct scmi_desc {
+	struct scmi_transport_ops *ops;
+	int max_rx_timeout_ms;
+	int max_msg;
+	int max_msg_size;
+};
+
+extern const struct scmi_desc scmi_mailbox_desc;
+
+void scmi_rx_callback(struct scmi_chan_info *cinfo, u32 msg_hdr);
+void scmi_free_channel(struct scmi_chan_info *cinfo, struct idr *idr, int id);
+
+/* shmem related declarations */
+struct scmi_shared_mem;
+
+void shmem_tx_prepare(struct scmi_shared_mem __iomem *shmem,
+		      struct scmi_xfer *xfer);
+u32 shmem_read_header(struct scmi_shared_mem __iomem *shmem);
+void shmem_fetch_response(struct scmi_shared_mem __iomem *shmem,
+			  struct scmi_xfer *xfer);
+bool shmem_poll_done(struct scmi_shared_mem __iomem *shmem,
+		     struct scmi_xfer *xfer);
diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
index 2c96f6b..dbec767 100644
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -19,12 +19,10 @@
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/ktime.h>
-#include <linux/mailbox_client.h>
 #include <linux/module.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
 #include <linux/processor.h>
-#include <linux/semaphore.h>
 #include <linux/slab.h>
 
 #include "common.h"
@@ -32,19 +30,6 @@
 #define CREATE_TRACE_POINTS
 #include <trace/events/scmi.h>
 
-#define MSG_ID_MASK		GENMASK(7, 0)
-#define MSG_XTRACT_ID(hdr)	FIELD_GET(MSG_ID_MASK, (hdr))
-#define MSG_TYPE_MASK		GENMASK(9, 8)
-#define MSG_XTRACT_TYPE(hdr)	FIELD_GET(MSG_TYPE_MASK, (hdr))
-#define MSG_TYPE_COMMAND	0
-#define MSG_TYPE_DELAYED_RESP	2
-#define MSG_TYPE_NOTIFICATION	3
-#define MSG_PROTOCOL_ID_MASK	GENMASK(17, 10)
-#define MSG_XTRACT_PROT_ID(hdr)	FIELD_GET(MSG_PROTOCOL_ID_MASK, (hdr))
-#define MSG_TOKEN_ID_MASK	GENMASK(27, 18)
-#define MSG_XTRACT_TOKEN(hdr)	FIELD_GET(MSG_TOKEN_ID_MASK, (hdr))
-#define MSG_TOKEN_MAX		(MSG_XTRACT_TOKEN(MSG_TOKEN_ID_MASK) + 1)
-
 enum scmi_error_codes {
 	SCMI_SUCCESS = 0,	/* Success */
 	SCMI_ERR_SUPPORT = -1,	/* Not supported */
@@ -83,45 +68,13 @@ struct scmi_xfers_info {
 };
 
 /**
- * struct scmi_desc - Description of SoC integration
- *
- * @max_rx_timeout_ms: Timeout for communication with SoC (in Milliseconds)
- * @max_msg: Maximum number of messages that can be pending
- *	simultaneously in the system
- * @max_msg_size: Maximum size of data per message that can be handled.
- */
-struct scmi_desc {
-	int max_rx_timeout_ms;
-	int max_msg;
-	int max_msg_size;
-};
-
-/**
- * struct scmi_chan_info - Structure representing a SCMI channel information
- *
- * @cl: Mailbox Client
- * @chan: Transmit/Receive mailbox channel
- * @payload: Transmit/Receive mailbox channel payload area
- * @dev: Reference to device in the SCMI hierarchy corresponding to this
- *	 channel
- * @handle: Pointer to SCMI entity handle
- */
-struct scmi_chan_info {
-	struct mbox_client cl;
-	struct mbox_chan *chan;
-	void __iomem *payload;
-	struct device *dev;
-	struct scmi_handle *handle;
-};
-
-/**
  * struct scmi_info - Structure representing a SCMI instance
  *
  * @dev: Device pointer
  * @desc: SoC description for this instance
- * @handle: Instance of SCMI handle to send to clients
  * @version: SCMI revision information containing protocol version,
  *	implementation version and (sub-)vendor identification.
+ * @handle: Instance of SCMI handle to send to clients
  * @tx_minfo: Universal Transmit Message management info
  * @tx_idr: IDR object to map protocol id to Tx channel info pointer
  * @rx_idr: IDR object to map protocol id to Rx channel info pointer
@@ -143,27 +96,8 @@ struct scmi_info {
 	int users;
 };
 
-#define client_to_scmi_chan_info(c) container_of(c, struct scmi_chan_info, cl)
 #define handle_to_scmi_info(h)	container_of(h, struct scmi_info, handle)
 
-/*
- * SCMI specification requires all parameters, message headers, return
- * arguments or any protocol data to be expressed in little endian
- * format only.
- */
-struct scmi_shared_mem {
-	__le32 reserved;
-	__le32 channel_status;
-#define SCMI_SHMEM_CHAN_STAT_CHANNEL_ERROR	BIT(1)
-#define SCMI_SHMEM_CHAN_STAT_CHANNEL_FREE	BIT(0)
-	__le32 reserved1[2];
-	__le32 flags;
-#define SCMI_SHMEM_FLAG_INTR_ENABLED	BIT(0)
-	__le32 length;
-	__le32 msg_header;
-	u8 msg_payload[0];
-};
-
 static const int scmi_linux_errmap[] = {
 	/* better than switch case as long as return value is continuous */
 	0,			/* SCMI_SUCCESS */
@@ -199,77 +133,6 @@ static inline void scmi_dump_header_dbg(struct device *dev,
 		hdr->id, hdr->seq, hdr->protocol_id);
 }
 
-static void scmi_fetch_response(struct scmi_xfer *xfer,
-				struct scmi_shared_mem __iomem *mem)
-{
-	xfer->hdr.status = ioread32(mem->msg_payload);
-	/* Skip the length of header and status in payload area i.e 8 bytes */
-	xfer->rx.len = min_t(size_t, xfer->rx.len, ioread32(&mem->length) - 8);
-
-	/* Take a copy to the rx buffer.. */
-	memcpy_fromio(xfer->rx.buf, mem->msg_payload + 4, xfer->rx.len);
-}
-
-/**
- * pack_scmi_header() - packs and returns 32-bit header
- *
- * @hdr: pointer to header containing all the information on message id,
- *	protocol id and sequence id.
- *
- * Return: 32-bit packed message header to be sent to the platform.
- */
-static inline u32 pack_scmi_header(struct scmi_msg_hdr *hdr)
-{
-	return FIELD_PREP(MSG_ID_MASK, hdr->id) |
-		FIELD_PREP(MSG_TOKEN_ID_MASK, hdr->seq) |
-		FIELD_PREP(MSG_PROTOCOL_ID_MASK, hdr->protocol_id);
-}
-
-/**
- * unpack_scmi_header() - unpacks and records message and protocol id
- *
- * @msg_hdr: 32-bit packed message header sent from the platform
- * @hdr: pointer to header to fetch message and protocol id.
- */
-static inline void unpack_scmi_header(u32 msg_hdr, struct scmi_msg_hdr *hdr)
-{
-	hdr->id = MSG_XTRACT_ID(msg_hdr);
-	hdr->protocol_id = MSG_XTRACT_PROT_ID(msg_hdr);
-}
-
-/**
- * scmi_tx_prepare() - mailbox client callback to prepare for the transfer
- *
- * @cl: client pointer
- * @m: mailbox message
- *
- * This function prepares the shared memory which contains the header and the
- * payload.
- */
-static void scmi_tx_prepare(struct mbox_client *cl, void *m)
-{
-	struct scmi_xfer *t = m;
-	struct scmi_chan_info *cinfo = client_to_scmi_chan_info(cl);
-	struct scmi_shared_mem __iomem *mem = cinfo->payload;
-
-	/*
-	 * Ideally channel must be free by now unless OS timeout last
-	 * request and platform continued to process the same, wait
-	 * until it releases the shared memory, otherwise we may endup
-	 * overwriting its response with new message payload or vice-versa
-	 */
-	spin_until_cond(ioread32(&mem->channel_status) &
-			SCMI_SHMEM_CHAN_STAT_CHANNEL_FREE);
-	/* Mark channel busy + clear error */
-	iowrite32(0x0, &mem->channel_status);
-	iowrite32(t->hdr.poll_completion ? 0 : SCMI_SHMEM_FLAG_INTR_ENABLED,
-		  &mem->flags);
-	iowrite32(sizeof(mem->msg_header) + t->tx.len, &mem->length);
-	iowrite32(pack_scmi_header(&t->hdr), &mem->msg_header);
-	if (t->tx.buf)
-		memcpy_toio(mem->msg_payload, t->tx.buf, t->tx.len);
-}
-
 /**
  * scmi_xfer_get() - Allocate one message
  *
@@ -338,10 +201,10 @@ __scmi_xfer_put(struct scmi_xfers_info *minfo, struct scmi_xfer *xfer)
 }
 
 /**
- * scmi_rx_callback() - mailbox client callback for receive messages
+ * scmi_rx_callback() - callback for receiving messages
  *
- * @cl: client pointer
- * @m: mailbox message
+ * @cinfo: SCMI channel info
+ * @msg_hdr: Message header
  *
  * Processes one received message to appropriate transfer information and
  * signals completion of the transfer.
@@ -349,21 +212,14 @@ __scmi_xfer_put(struct scmi_xfers_info *minfo, struct scmi_xfer *xfer)
  * NOTE: This function will be invoked in IRQ context, hence should be
  * as optimal as possible.
  */
-static void scmi_rx_callback(struct mbox_client *cl, void *m)
+void scmi_rx_callback(struct scmi_chan_info *cinfo, u32 msg_hdr)
 {
-	u8 msg_type;
-	u32 msg_hdr;
-	u16 xfer_id;
-	struct scmi_xfer *xfer;
-	struct scmi_chan_info *cinfo = client_to_scmi_chan_info(cl);
-	struct device *dev = cinfo->dev;
 	struct scmi_info *info = handle_to_scmi_info(cinfo->handle);
 	struct scmi_xfers_info *minfo = &info->tx_minfo;
-	struct scmi_shared_mem __iomem *mem = cinfo->payload;
-
-	msg_hdr = ioread32(&mem->msg_header);
-	msg_type = MSG_XTRACT_TYPE(msg_hdr);
-	xfer_id = MSG_XTRACT_TOKEN(msg_hdr);
+	u16 xfer_id = MSG_XTRACT_TOKEN(msg_hdr);
+	u8 msg_type = MSG_XTRACT_TYPE(msg_hdr);
+	struct device *dev = cinfo->dev;
+	struct scmi_xfer *xfer;
 
 	if (msg_type == MSG_TYPE_NOTIFICATION)
 		return; /* Notifications not yet supported */
@@ -378,7 +234,7 @@ static void scmi_rx_callback(struct mbox_client *cl, void *m)
 
 	scmi_dump_header_dbg(dev, &xfer->hdr);
 
-	scmi_fetch_response(xfer, mem);
+	info->desc->ops->fetch_response(cinfo, xfer);
 
 	trace_scmi_rx_done(xfer->transfer_id, xfer->hdr.id,
 			   xfer->hdr.protocol_id, xfer->hdr.seq,
@@ -403,28 +259,15 @@ void scmi_xfer_put(const struct scmi_handle *handle, struct scmi_xfer *xfer)
 	__scmi_xfer_put(&info->tx_minfo, xfer);
 }
 
-static bool
-scmi_xfer_poll_done(const struct scmi_chan_info *cinfo, struct scmi_xfer *xfer)
-{
-	struct scmi_shared_mem __iomem *mem = cinfo->payload;
-	u16 xfer_id = MSG_XTRACT_TOKEN(ioread32(&mem->msg_header));
-
-	if (xfer->hdr.seq != xfer_id)
-		return false;
-
-	return ioread32(&mem->channel_status) &
-		(SCMI_SHMEM_CHAN_STAT_CHANNEL_ERROR |
-		SCMI_SHMEM_CHAN_STAT_CHANNEL_FREE);
-}
-
 #define SCMI_MAX_POLL_TO_NS	(100 * NSEC_PER_USEC)
 
-static bool scmi_xfer_done_no_timeout(const struct scmi_chan_info *cinfo,
+static bool scmi_xfer_done_no_timeout(struct scmi_chan_info *cinfo,
 				      struct scmi_xfer *xfer, ktime_t stop)
 {
-	ktime_t __cur = ktime_get();
+	struct scmi_info *info = handle_to_scmi_info(cinfo->handle);
 
-	return scmi_xfer_poll_done(cinfo, xfer) || ktime_after(__cur, stop);
+	return info->desc->ops->poll_done(cinfo, xfer) ||
+	       ktime_after(ktime_get(), stop);
 }
 
 /**
@@ -453,29 +296,26 @@ int scmi_do_xfer(const struct scmi_handle *handle, struct scmi_xfer *xfer)
 			      xfer->hdr.protocol_id, xfer->hdr.seq,
 			      xfer->hdr.poll_completion);
 
-	ret = mbox_send_message(cinfo->chan, xfer);
+	ret = info->desc->ops->send_message(cinfo, xfer);
 	if (ret < 0) {
-		dev_dbg(dev, "mbox send fail %d\n", ret);
+		dev_dbg(dev, "Failed to send message %d\n", ret);
 		return ret;
 	}
 
-	/* mbox_send_message returns non-negative value on success, so reset */
-	ret = 0;
-
 	if (xfer->hdr.poll_completion) {
 		ktime_t stop = ktime_add_ns(ktime_get(), SCMI_MAX_POLL_TO_NS);
 
 		spin_until_cond(scmi_xfer_done_no_timeout(cinfo, xfer, stop));
 
 		if (ktime_before(ktime_get(), stop))
-			scmi_fetch_response(xfer, cinfo->payload);
+			info->desc->ops->fetch_response(cinfo, xfer);
 		else
 			ret = -ETIMEDOUT;
 	} else {
 		/* And we wait for the response. */
 		timeout = msecs_to_jiffies(info->desc->max_rx_timeout_ms);
 		if (!wait_for_completion_timeout(&xfer->done, timeout)) {
-			dev_err(dev, "mbox timed out in resp(caller: %pS)\n",
+			dev_err(dev, "timed out in resp(caller: %pS)\n",
 				(void *)_RET_IP_);
 			ret = -ETIMEDOUT;
 		}
@@ -484,13 +324,8 @@ int scmi_do_xfer(const struct scmi_handle *handle, struct scmi_xfer *xfer)
 	if (!ret && xfer->hdr.status)
 		ret = scmi_to_linux_errno(xfer->hdr.status);
 
-	/*
-	 * NOTE: we might prefer not to need the mailbox ticker to manage the
-	 * transfer queueing since the protocol layer queues things by itself.
-	 * Unfortunately, we have to kick the mailbox framework after we have
-	 * received our message.
-	 */
-	mbox_client_txdone(cinfo->chan, ret);
+	if (info->desc->ops->mark_txdone)
+		info->desc->ops->mark_txdone(cinfo, ret);
 
 	trace_scmi_xfer_end(xfer->transfer_id, xfer->hdr.id,
 			    xfer->hdr.protocol_id, xfer->hdr.seq,
@@ -731,23 +566,12 @@ static int scmi_xfer_info_init(struct scmi_info *sinfo)
 	return 0;
 }
 
-static int scmi_mailbox_check(struct device_node *np, int idx)
-{
-	return of_parse_phandle_with_args(np, "mboxes", "#mbox-cells",
-					  idx, NULL);
-}
-
-static int scmi_mbox_chan_setup(struct scmi_info *info, struct device *dev,
-				int prot_id, bool tx)
+static int scmi_chan_setup(struct scmi_info *info, struct device *dev,
+			   int prot_id, bool tx)
 {
 	int ret, idx;
-	struct resource res;
-	resource_size_t size;
-	struct device_node *shmem, *np = dev->of_node;
 	struct scmi_chan_info *cinfo;
-	struct mbox_client *cl;
 	struct idr *idr;
-	const char *desc = tx ? "Tx" : "Rx";
 
 	/* Transmit channel is first entry i.e. index 0 */
 	idx = tx ? 0 : 1;
@@ -758,7 +582,7 @@ static int scmi_mbox_chan_setup(struct scmi_info *info, struct device *dev,
 	if (cinfo)
 		return 0;
 
-	if (scmi_mailbox_check(np, idx)) {
+	if (!info->desc->ops->chan_available(dev, idx)) {
 		cinfo = idr_find(idr, SCMI_PROTOCOL_BASE);
 		if (unlikely(!cinfo)) /* Possible only if platform has no Rx */
 			return -EINVAL;
@@ -771,36 +595,9 @@ static int scmi_mbox_chan_setup(struct scmi_info *info, struct device *dev,
 
 	cinfo->dev = dev;
 
-	cl = &cinfo->cl;
-	cl->dev = dev;
-	cl->rx_callback = scmi_rx_callback;
-	cl->tx_prepare = tx ? scmi_tx_prepare : NULL;
-	cl->tx_block = false;
-	cl->knows_txdone = tx;
-
-	shmem = of_parse_phandle(np, "shmem", idx);
-	ret = of_address_to_resource(shmem, 0, &res);
-	of_node_put(shmem);
-	if (ret) {
-		dev_err(dev, "failed to get SCMI %s payload memory\n", desc);
+	ret = info->desc->ops->chan_setup(cinfo, info->dev, tx);
+	if (ret)
 		return ret;
-	}
-
-	size = resource_size(&res);
-	cinfo->payload = devm_ioremap(info->dev, res.start, size);
-	if (!cinfo->payload) {
-		dev_err(dev, "failed to ioremap SCMI %s payload\n", desc);
-		return -EADDRNOTAVAIL;
-	}
-
-	cinfo->chan = mbox_request_channel(cl, idx);
-	if (IS_ERR(cinfo->chan)) {
-		ret = PTR_ERR(cinfo->chan);
-		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "failed to request SCMI %s mailbox\n",
-				desc);
-		return ret;
-	}
 
 idr_alloc:
 	ret = idr_alloc(idr, cinfo, prot_id, prot_id + 1, GFP_KERNEL);
@@ -814,12 +611,12 @@ static int scmi_mbox_chan_setup(struct scmi_info *info, struct device *dev,
 }
 
 static inline int
-scmi_mbox_txrx_setup(struct scmi_info *info, struct device *dev, int prot_id)
+scmi_txrx_setup(struct scmi_info *info, struct device *dev, int prot_id)
 {
-	int ret = scmi_mbox_chan_setup(info, dev, prot_id, true);
+	int ret = scmi_chan_setup(info, dev, prot_id, true);
 
 	if (!ret) /* Rx is optional, hence no error check */
-		scmi_mbox_chan_setup(info, dev, prot_id, false);
+		scmi_chan_setup(info, dev, prot_id, false);
 
 	return ret;
 }
@@ -837,7 +634,7 @@ scmi_create_protocol_device(struct device_node *np, struct scmi_info *info,
 		return;
 	}
 
-	if (scmi_mbox_txrx_setup(info, &sdev->dev, prot_id)) {
+	if (scmi_txrx_setup(info, &sdev->dev, prot_id)) {
 		dev_err(&sdev->dev, "failed to setup transport\n");
 		scmi_device_destroy(sdev);
 		return;
@@ -890,12 +687,6 @@ static int scmi_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct device_node *child, *np = dev->of_node;
 
-	/* Only mailbox method supported, check for the presence of one */
-	if (scmi_mailbox_check(np, 0)) {
-		dev_err(dev, "no mailbox found in %pOF\n", np);
-		return -EINVAL;
-	}
-
 	desc = of_device_get_match_data(dev);
 	if (!desc)
 		return -EINVAL;
@@ -920,7 +711,7 @@ static int scmi_probe(struct platform_device *pdev)
 	handle->dev = info->dev;
 	handle->version = &info->version;
 
-	ret = scmi_mbox_txrx_setup(info, dev, SCMI_PROTOCOL_BASE);
+	ret = scmi_txrx_setup(info, dev, SCMI_PROTOCOL_BASE);
 	if (ret)
 		return ret;
 
@@ -955,19 +746,9 @@ static int scmi_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int scmi_mbox_free_channel(int id, void *p, void *data)
+void scmi_free_channel(struct scmi_chan_info *cinfo, struct idr *idr, int id)
 {
-	struct scmi_chan_info *cinfo = p;
-	struct idr *idr = data;
-
-	if (!IS_ERR_OR_NULL(cinfo->chan)) {
-		mbox_free_channel(cinfo->chan);
-		cinfo->chan = NULL;
-	}
-
 	idr_remove(idr, id);
-
-	return 0;
 }
 
 static int scmi_remove(struct platform_device *pdev)
@@ -987,11 +768,11 @@ static int scmi_remove(struct platform_device *pdev)
 		return ret;
 
 	/* Safe to free channels since no more users */
-	ret = idr_for_each(idr, scmi_mbox_free_channel, idr);
+	ret = idr_for_each(idr, info->desc->ops->chan_free, idr);
 	idr_destroy(&info->tx_idr);
 
 	idr = &info->rx_idr;
-	ret = idr_for_each(idr, scmi_mbox_free_channel, idr);
+	ret = idr_for_each(idr, info->desc->ops->chan_free, idr);
 	idr_destroy(&info->rx_idr);
 
 	return ret;
@@ -1043,15 +824,9 @@ static struct attribute *versions_attrs[] = {
 };
 ATTRIBUTE_GROUPS(versions);
 
-static const struct scmi_desc scmi_generic_desc = {
-	.max_rx_timeout_ms = 30,	/* We may increase this if required */
-	.max_msg = 20,		/* Limited by MBOX_TX_QUEUE_LEN */
-	.max_msg_size = 128,
-};
-
 /* Each compatible listed below must have descriptor associated with it */
 static const struct of_device_id scmi_of_match[] = {
-	{ .compatible = "arm,scmi", .data = &scmi_generic_desc },
+	{ .compatible = "arm,scmi", .data = &scmi_mailbox_desc },
 	{ /* Sentinel */ },
 };
 
diff --git a/drivers/firmware/arm_scmi/mailbox.c b/drivers/firmware/arm_scmi/mailbox.c
new file mode 100644
index 0000000..73077bb
--- /dev/null
+++ b/drivers/firmware/arm_scmi/mailbox.c
@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * System Control and Management Interface (SCMI) Message Mailbox Transport
+ * driver.
+ *
+ * Copyright (C) 2019 ARM Ltd.
+ */
+
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/mailbox_client.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+
+#include "common.h"
+
+/**
+ * struct scmi_mailbox - Structure representing a SCMI mailbox transport
+ *
+ * @cl: Mailbox Client
+ * @chan: Transmit/Receive mailbox channel
+ * @cinfo: SCMI channel info
+ * @shmem: Transmit/Receive shared memory area
+ */
+struct scmi_mailbox {
+	struct mbox_client cl;
+	struct mbox_chan *chan;
+	struct scmi_chan_info *cinfo;
+	struct scmi_shared_mem __iomem *shmem;
+};
+
+#define client_to_scmi_mailbox(c) container_of(c, struct scmi_mailbox, cl)
+
+static void tx_prepare(struct mbox_client *cl, void *m)
+{
+	struct scmi_mailbox *smbox = client_to_scmi_mailbox(cl);
+
+	shmem_tx_prepare(smbox->shmem, m);
+}
+
+static void rx_callback(struct mbox_client *cl, void *m)
+{
+	struct scmi_mailbox *smbox = client_to_scmi_mailbox(cl);
+
+	scmi_rx_callback(smbox->cinfo, shmem_read_header(smbox->shmem));
+}
+
+static bool mailbox_chan_available(struct device *dev, int idx)
+{
+	return !of_parse_phandle_with_args(dev->of_node, "mboxes",
+					   "#mbox-cells", idx, NULL);
+}
+
+static int mailbox_chan_setup(struct scmi_chan_info *cinfo, struct device *dev,
+			      bool tx)
+{
+	const char *desc = tx ? "Tx" : "Rx";
+	struct device *cdev = cinfo->dev;
+	struct scmi_mailbox *smbox;
+	struct device_node *shmem;
+	int ret, idx = tx ? 0 : 1;
+	struct mbox_client *cl;
+	resource_size_t size;
+	struct resource res;
+
+	smbox = devm_kzalloc(dev, sizeof(*smbox), GFP_KERNEL);
+	if (!smbox)
+		return -ENOMEM;
+
+	shmem = of_parse_phandle(cdev->of_node, "shmem", idx);
+	ret = of_address_to_resource(shmem, 0, &res);
+	of_node_put(shmem);
+	if (ret) {
+		dev_err(cdev, "failed to get SCMI %s shared memory\n", desc);
+		return ret;
+	}
+
+	size = resource_size(&res);
+	smbox->shmem = devm_ioremap(dev, res.start, size);
+	if (!smbox->shmem) {
+		dev_err(dev, "failed to ioremap SCMI %s shared memory\n", desc);
+		return -EADDRNOTAVAIL;
+	}
+
+	cl = &smbox->cl;
+	cl->dev = cdev;
+	cl->tx_prepare = tx ? tx_prepare : NULL;
+	cl->rx_callback = rx_callback;
+	cl->tx_block = false;
+	cl->knows_txdone = tx;
+
+	smbox->chan = mbox_request_channel(cl, tx ? 0 : 1);
+	if (IS_ERR(smbox->chan)) {
+		ret = PTR_ERR(smbox->chan);
+		if (ret != -EPROBE_DEFER)
+			dev_err(cdev, "failed to request SCMI %s mailbox\n",
+				tx ? "Tx" : "Rx");
+		return ret;
+	}
+
+	cinfo->transport_info = smbox;
+	smbox->cinfo = cinfo;
+
+	return 0;
+}
+
+static int mailbox_chan_free(int id, void *p, void *data)
+{
+	struct scmi_chan_info *cinfo = p;
+	struct scmi_mailbox *smbox = cinfo->transport_info;
+
+	if (!IS_ERR(smbox->chan)) {
+		mbox_free_channel(smbox->chan);
+		cinfo->transport_info = NULL;
+		smbox->chan = NULL;
+		smbox->cinfo = NULL;
+	}
+
+	scmi_free_channel(cinfo, data, id);
+
+	return 0;
+}
+
+static int mailbox_send_message(struct scmi_chan_info *cinfo,
+				struct scmi_xfer *xfer)
+{
+	struct scmi_mailbox *smbox = cinfo->transport_info;
+	int ret;
+
+	ret = mbox_send_message(smbox->chan, xfer);
+
+	/* mbox_send_message returns non-negative value on success, so reset */
+	if (ret > 0)
+		ret = 0;
+
+	return ret;
+}
+
+static void mailbox_mark_txdone(struct scmi_chan_info *cinfo, int ret)
+{
+	struct scmi_mailbox *smbox = cinfo->transport_info;
+
+	/*
+	 * NOTE: we might prefer not to need the mailbox ticker to manage the
+	 * transfer queueing since the protocol layer queues things by itself.
+	 * Unfortunately, we have to kick the mailbox framework after we have
+	 * received our message.
+	 */
+	mbox_client_txdone(smbox->chan, ret);
+}
+
+static void mailbox_fetch_response(struct scmi_chan_info *cinfo,
+				   struct scmi_xfer *xfer)
+{
+	struct scmi_mailbox *smbox = cinfo->transport_info;
+
+	shmem_fetch_response(smbox->shmem, xfer);
+}
+
+static bool
+mailbox_poll_done(struct scmi_chan_info *cinfo, struct scmi_xfer *xfer)
+{
+	struct scmi_mailbox *smbox = cinfo->transport_info;
+
+	return shmem_poll_done(smbox->shmem, xfer);
+}
+
+static struct scmi_transport_ops scmi_mailbox_ops = {
+	.chan_available = mailbox_chan_available,
+	.chan_setup = mailbox_chan_setup,
+	.chan_free = mailbox_chan_free,
+	.send_message = mailbox_send_message,
+	.mark_txdone = mailbox_mark_txdone,
+	.fetch_response = mailbox_fetch_response,
+	.poll_done = mailbox_poll_done,
+};
+
+const struct scmi_desc scmi_mailbox_desc = {
+	.ops = &scmi_mailbox_ops,
+	.max_rx_timeout_ms = 30, /* We may increase this if required */
+	.max_msg = 20, /* Limited by MBOX_TX_QUEUE_LEN */
+	.max_msg_size = 128,
+};
diff --git a/drivers/firmware/arm_scmi/perf.c b/drivers/firmware/arm_scmi/perf.c
index ec81e6f..34f3a917 100644
--- a/drivers/firmware/arm_scmi/perf.c
+++ b/drivers/firmware/arm_scmi/perf.c
@@ -89,7 +89,7 @@ struct scmi_msg_resp_perf_describe_levels {
 		__le32 power;
 		__le16 transition_latency_us;
 		__le16 reserved;
-	} opp[0];
+	} opp[];
 };
 
 struct scmi_perf_get_fc_info {
diff --git a/drivers/firmware/arm_scmi/shmem.c b/drivers/firmware/arm_scmi/shmem.c
new file mode 100644
index 0000000..e1e816e
--- /dev/null
+++ b/drivers/firmware/arm_scmi/shmem.c
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * For transport using shared mem structure.
+ *
+ * Copyright (C) 2019 ARM Ltd.
+ */
+
+#include <linux/io.h>
+#include <linux/processor.h>
+#include <linux/types.h>
+
+#include "common.h"
+
+/*
+ * SCMI specification requires all parameters, message headers, return
+ * arguments or any protocol data to be expressed in little endian
+ * format only.
+ */
+struct scmi_shared_mem {
+	__le32 reserved;
+	__le32 channel_status;
+#define SCMI_SHMEM_CHAN_STAT_CHANNEL_ERROR	BIT(1)
+#define SCMI_SHMEM_CHAN_STAT_CHANNEL_FREE	BIT(0)
+	__le32 reserved1[2];
+	__le32 flags;
+#define SCMI_SHMEM_FLAG_INTR_ENABLED	BIT(0)
+	__le32 length;
+	__le32 msg_header;
+	u8 msg_payload[];
+};
+
+void shmem_tx_prepare(struct scmi_shared_mem __iomem *shmem,
+		      struct scmi_xfer *xfer)
+{
+	/*
+	 * Ideally channel must be free by now unless OS timeout last
+	 * request and platform continued to process the same, wait
+	 * until it releases the shared memory, otherwise we may endup
+	 * overwriting its response with new message payload or vice-versa
+	 */
+	spin_until_cond(ioread32(&shmem->channel_status) &
+			SCMI_SHMEM_CHAN_STAT_CHANNEL_FREE);
+	/* Mark channel busy + clear error */
+	iowrite32(0x0, &shmem->channel_status);
+	iowrite32(xfer->hdr.poll_completion ? 0 : SCMI_SHMEM_FLAG_INTR_ENABLED,
+		  &shmem->flags);
+	iowrite32(sizeof(shmem->msg_header) + xfer->tx.len, &shmem->length);
+	iowrite32(pack_scmi_header(&xfer->hdr), &shmem->msg_header);
+	if (xfer->tx.buf)
+		memcpy_toio(shmem->msg_payload, xfer->tx.buf, xfer->tx.len);
+}
+
+u32 shmem_read_header(struct scmi_shared_mem __iomem *shmem)
+{
+	return ioread32(&shmem->msg_header);
+}
+
+void shmem_fetch_response(struct scmi_shared_mem __iomem *shmem,
+			  struct scmi_xfer *xfer)
+{
+	xfer->hdr.status = ioread32(shmem->msg_payload);
+	/* Skip the length of header and status in shmem area i.e 8 bytes */
+	xfer->rx.len = min_t(size_t, xfer->rx.len,
+			     ioread32(&shmem->length) - 8);
+
+	/* Take a copy to the rx buffer.. */
+	memcpy_fromio(xfer->rx.buf, shmem->msg_payload + 4, xfer->rx.len);
+}
+
+bool shmem_poll_done(struct scmi_shared_mem __iomem *shmem,
+		     struct scmi_xfer *xfer)
+{
+	u16 xfer_id;
+
+	xfer_id = MSG_XTRACT_TOKEN(ioread32(&shmem->msg_header));
+
+	if (xfer->hdr.seq != xfer_id)
+		return false;
+
+	return ioread32(&shmem->channel_status) &
+		(SCMI_SHMEM_CHAN_STAT_CHANNEL_ERROR |
+		 SCMI_SHMEM_CHAN_STAT_CHANNEL_FREE);
+}
diff --git a/drivers/firmware/arm_scpi.c b/drivers/firmware/arm_scpi.c
index a80c331..d0dee37 100644
--- a/drivers/firmware/arm_scpi.c
+++ b/drivers/firmware/arm_scpi.c
@@ -262,12 +262,12 @@ struct scpi_drvinfo {
 struct scpi_shared_mem {
 	__le32 command;
 	__le32 status;
-	u8 payload[0];
+	u8 payload[];
 } __packed;
 
 struct legacy_scpi_shared_mem {
 	__le32 status;
-	u8 payload[0];
+	u8 payload[];
 } __packed;
 
 struct scp_capabilities {
diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c
index 29906e3..14d0970 100644
--- a/drivers/firmware/edd.c
+++ b/drivers/firmware/edd.c
@@ -341,7 +341,7 @@ edd_show_legacy_max_cylinder(struct edd_device *edev, char *buf)
 	if (!info || !buf)
 		return -EINVAL;
 
-	p += snprintf(p, left, "%u\n", info->legacy_max_cylinder);
+	p += scnprintf(p, left, "%u\n", info->legacy_max_cylinder);
 	return (p - buf);
 }
 
@@ -356,7 +356,7 @@ edd_show_legacy_max_head(struct edd_device *edev, char *buf)
 	if (!info || !buf)
 		return -EINVAL;
 
-	p += snprintf(p, left, "%u\n", info->legacy_max_head);
+	p += scnprintf(p, left, "%u\n", info->legacy_max_head);
 	return (p - buf);
 }
 
@@ -371,7 +371,7 @@ edd_show_legacy_sectors_per_track(struct edd_device *edev, char *buf)
 	if (!info || !buf)
 		return -EINVAL;
 
-	p += snprintf(p, left, "%u\n", info->legacy_sectors_per_track);
+	p += scnprintf(p, left, "%u\n", info->legacy_sectors_per_track);
 	return (p - buf);
 }
 
diff --git a/drivers/firmware/efi/cper.c b/drivers/firmware/efi/cper.c
index b1af0de..9d25129 100644
--- a/drivers/firmware/efi/cper.c
+++ b/drivers/firmware/efi/cper.c
@@ -101,7 +101,7 @@ void cper_print_bits(const char *pfx, unsigned int bits,
 		if (!len)
 			len = snprintf(buf, sizeof(buf), "%s%s", pfx, str);
 		else
-			len += snprintf(buf+len, sizeof(buf)-len, ", %s", str);
+			len += scnprintf(buf+len, sizeof(buf)-len, ", %s", str);
 	}
 	if (len)
 		printk("%s\n", buf);
diff --git a/drivers/firmware/efi/libstub/arm64-stub.c b/drivers/firmware/efi/libstub/arm64-stub.c
index db0c1a9..fc9f8ab 100644
--- a/drivers/firmware/efi/libstub/arm64-stub.c
+++ b/drivers/firmware/efi/libstub/arm64-stub.c
@@ -75,14 +75,12 @@ efi_status_t handle_kernel_image(unsigned long *image_addr,
 
 	if (IS_ENABLED(CONFIG_RANDOMIZE_BASE) && phys_seed != 0) {
 		/*
-		 * If CONFIG_DEBUG_ALIGN_RODATA is not set, produce a
-		 * displacement in the interval [0, MIN_KIMG_ALIGN) that
-		 * doesn't violate this kernel's de-facto alignment
+		 * Produce a displacement in the interval [0, MIN_KIMG_ALIGN)
+		 * that doesn't violate this kernel's de-facto alignment
 		 * constraints.
 		 */
 		u32 mask = (MIN_KIMG_ALIGN - 1) & ~(EFI_KIMG_ALIGN - 1);
-		u32 offset = !IS_ENABLED(CONFIG_DEBUG_ALIGN_RODATA) ?
-			     (phys_seed >> 32) & mask : TEXT_OFFSET;
+		u32 offset = (phys_seed >> 32) & mask;
 
 		/*
 		 * With CONFIG_RANDOMIZE_TEXT_OFFSET=y, TEXT_OFFSET may not
diff --git a/drivers/firmware/efi/libstub/efistub.h b/drivers/firmware/efi/libstub/efistub.h
index cc90a74..67d2694 100644
--- a/drivers/firmware/efi/libstub/efistub.h
+++ b/drivers/firmware/efi/libstub/efistub.h
@@ -25,7 +25,7 @@
 #define EFI_ALLOC_ALIGN		EFI_PAGE_SIZE
 #endif
 
-#ifdef CONFIG_ARM
+#if defined(CONFIG_ARM) || defined(CONFIG_X86)
 #define __efistub_global	__section(.data)
 #else
 #define __efistub_global
diff --git a/drivers/firmware/efi/libstub/file.c b/drivers/firmware/efi/libstub/file.c
index d4c7e5f..ea66b1f1 100644
--- a/drivers/firmware/efi/libstub/file.c
+++ b/drivers/firmware/efi/libstub/file.c
@@ -29,30 +29,31 @@
  */
 #define EFI_READ_CHUNK_SIZE	SZ_1M
 
+struct finfo {
+	efi_file_info_t info;
+	efi_char16_t	filename[MAX_FILENAME_SIZE];
+};
+
 static efi_status_t efi_open_file(efi_file_protocol_t *volume,
-				  efi_char16_t *filename_16,
+				  struct finfo *fi,
 				  efi_file_protocol_t **handle,
 				  unsigned long *file_size)
 {
-	struct {
-		efi_file_info_t info;
-		efi_char16_t	filename[MAX_FILENAME_SIZE];
-	} finfo;
 	efi_guid_t info_guid = EFI_FILE_INFO_ID;
 	efi_file_protocol_t *fh;
 	unsigned long info_sz;
 	efi_status_t status;
 
-	status = volume->open(volume, &fh, filename_16, EFI_FILE_MODE_READ, 0);
+	status = volume->open(volume, &fh, fi->filename, EFI_FILE_MODE_READ, 0);
 	if (status != EFI_SUCCESS) {
 		pr_efi_err("Failed to open file: ");
-		efi_char16_printk(filename_16);
+		efi_char16_printk(fi->filename);
 		efi_printk("\n");
 		return status;
 	}
 
-	info_sz = sizeof(finfo);
-	status = fh->get_info(fh, &info_guid, &info_sz, &finfo);
+	info_sz = sizeof(struct finfo);
+	status = fh->get_info(fh, &info_guid, &info_sz, fi);
 	if (status != EFI_SUCCESS) {
 		pr_efi_err("Failed to get file info\n");
 		fh->close(fh);
@@ -60,7 +61,7 @@ static efi_status_t efi_open_file(efi_file_protocol_t *volume,
 	}
 
 	*handle = fh;
-	*file_size = finfo.info.file_size;
+	*file_size = fi->info.file_size;
 	return EFI_SUCCESS;
 }
 
@@ -146,13 +147,13 @@ static efi_status_t handle_cmdline_files(efi_loaded_image_t *image,
 
 	alloc_addr = alloc_size = 0;
 	do {
-		efi_char16_t filename[MAX_FILENAME_SIZE];
+		struct finfo fi;
 		unsigned long size;
 		void *addr;
 
 		offset = find_file_option(cmdline, cmdline_len,
 					  optstr, optstr_size,
-					  filename, ARRAY_SIZE(filename));
+					  fi.filename, ARRAY_SIZE(fi.filename));
 
 		if (!offset)
 			break;
@@ -166,7 +167,7 @@ static efi_status_t handle_cmdline_files(efi_loaded_image_t *image,
 				return status;
 		}
 
-		status = efi_open_file(volume, filename, &file, &size);
+		status = efi_open_file(volume, &fi, &file, &size);
 		if (status != EFI_SUCCESS)
 			goto err_close_volume;
 
diff --git a/drivers/firmware/efi/libstub/x86-stub.c b/drivers/firmware/efi/libstub/x86-stub.c
index 8d3a707..05ccb22 100644
--- a/drivers/firmware/efi/libstub/x86-stub.c
+++ b/drivers/firmware/efi/libstub/x86-stub.c
@@ -20,7 +20,7 @@
 /* Maximum physical address for 64-bit kernel with 4-level paging */
 #define MAXMEM_X86_64_4LEVEL (1ull << 46)
 
-static efi_system_table_t *sys_table;
+static efi_system_table_t *sys_table __efistub_global;
 extern const bool efi_is64;
 extern u32 image_offset;
 
@@ -392,8 +392,6 @@ efi_status_t __efiapi efi_pe_entry(efi_handle_t handle,
 	image_base = efi_table_attr(image, image_base);
 	image_offset = (void *)startup_32 - image_base;
 
-	hdr = &((struct boot_params *)image_base)->hdr;
-
 	status = efi_allocate_pages(0x4000, (unsigned long *)&boot_params, ULONG_MAX);
 	if (status != EFI_SUCCESS) {
 		efi_printk("Failed to allocate lowmem for boot params\n");
@@ -742,8 +740,15 @@ unsigned long efi_main(efi_handle_t handle,
 	 * now use KERNEL_IMAGE_SIZE, which will be 512MiB, the same as what
 	 * KASLR uses.
 	 *
-	 * Also relocate it if image_offset is zero, i.e. we weren't loaded by
-	 * LoadImage, but we are not aligned correctly.
+	 * Also relocate it if image_offset is zero, i.e. the kernel wasn't
+	 * loaded by LoadImage, but rather by a bootloader that called the
+	 * handover entry. The reason we must always relocate in this case is
+	 * to handle the case of systemd-boot booting a unified kernel image,
+	 * which is a PE executable that contains the bzImage and an initrd as
+	 * COFF sections. The initrd section is placed after the bzImage
+	 * without ensuring that there are at least init_size bytes available
+	 * for the bzImage, and thus the compressed kernel's startup code may
+	 * overwrite the initrd unless it is moved out of the way.
 	 */
 
 	buffer_start = ALIGN(bzimage_addr - image_offset,
@@ -753,8 +758,7 @@ unsigned long efi_main(efi_handle_t handle,
 	if ((buffer_start < LOAD_PHYSICAL_ADDR)				     ||
 	    (IS_ENABLED(CONFIG_X86_32) && buffer_end > KERNEL_IMAGE_SIZE)    ||
 	    (IS_ENABLED(CONFIG_X86_64) && buffer_end > MAXMEM_X86_64_4LEVEL) ||
-	    (image_offset == 0 && !IS_ALIGNED(bzimage_addr,
-					      hdr->kernel_alignment))) {
+	    (image_offset == 0)) {
 		status = efi_relocate_kernel(&bzimage_addr,
 					     hdr->init_size, hdr->init_size,
 					     hdr->pref_address,
diff --git a/drivers/firmware/imx/Kconfig b/drivers/firmware/imx/Kconfig
index 1d2e5b8..116707a 100644
--- a/drivers/firmware/imx/Kconfig
+++ b/drivers/firmware/imx/Kconfig
@@ -12,7 +12,7 @@
 
 config IMX_SCU
 	bool "IMX SCU Protocol driver"
-	depends on IMX_MBOX
+	depends on IMX_MBOX || COMPILE_TEST
 	help
 	  The System Controller Firmware (SCFW) is a low-level system function
 	  which runs on a dedicated Cortex-M core to provide power, clock, and
@@ -24,6 +24,6 @@
 
 config IMX_SCU_PD
 	bool "IMX SCU Power Domain driver"
-	depends on IMX_SCU
+	depends on IMX_SCU || COMPILE_TEST
 	help
 	  The System Controller Firmware (SCFW) based power domain driver.
diff --git a/drivers/firmware/imx/scu-pd.c b/drivers/firmware/imx/scu-pd.c
index af3ae00..fb5523a 100644
--- a/drivers/firmware/imx/scu-pd.c
+++ b/drivers/firmware/imx/scu-pd.c
@@ -93,7 +93,7 @@ static const struct imx_sc_pd_range imx8qxp_scu_pd_ranges[] = {
 	{ "kpp", IMX_SC_R_KPP, 1, false, 0 },
 	{ "fspi", IMX_SC_R_FSPI_0, 2, true, 0 },
 	{ "mu_a", IMX_SC_R_MU_0A, 14, true, 0 },
-	{ "mu_b", IMX_SC_R_MU_13B, 1, true, 13 },
+	{ "mu_b", IMX_SC_R_MU_5B, 9, true, 5 },
 
 	/* CONN SS */
 	{ "usb", IMX_SC_R_USB_0, 2, true, 0 },
@@ -109,6 +109,7 @@ static const struct imx_sc_pd_range imx8qxp_scu_pd_ranges[] = {
 	{ "audio-pll0", IMX_SC_R_AUDIO_PLL_0, 1, false, 0 },
 	{ "audio-pll1", IMX_SC_R_AUDIO_PLL_1, 1, false, 0 },
 	{ "audio-clk-0", IMX_SC_R_AUDIO_CLK_0, 1, false, 0 },
+	{ "audio-clk-1", IMX_SC_R_AUDIO_CLK_1, 1, false, 0 },
 	{ "dma0-ch", IMX_SC_R_DMA_0_CH0, 16, true, 0 },
 	{ "dma1-ch", IMX_SC_R_DMA_1_CH0, 16, true, 0 },
 	{ "dma2-ch", IMX_SC_R_DMA_2_CH0, 5, true, 0 },
@@ -116,7 +117,13 @@ static const struct imx_sc_pd_range imx8qxp_scu_pd_ranges[] = {
 	{ "asrc1", IMX_SC_R_ASRC_1, 1, false, 0 },
 	{ "esai0", IMX_SC_R_ESAI_0, 1, false, 0 },
 	{ "spdif0", IMX_SC_R_SPDIF_0, 1, false, 0 },
+	{ "spdif1", IMX_SC_R_SPDIF_1, 1, false, 0 },
 	{ "sai", IMX_SC_R_SAI_0, 3, true, 0 },
+	{ "sai3", IMX_SC_R_SAI_3, 1, false, 0 },
+	{ "sai4", IMX_SC_R_SAI_4, 1, false, 0 },
+	{ "sai5", IMX_SC_R_SAI_5, 1, false, 0 },
+	{ "sai6", IMX_SC_R_SAI_6, 1, false, 0 },
+	{ "sai7", IMX_SC_R_SAI_7, 1, false, 0 },
 	{ "amix", IMX_SC_R_AMIX, 1, false, 0 },
 	{ "mqs0", IMX_SC_R_MQS_0, 1, false, 0 },
 	{ "dsp", IMX_SC_R_DSP, 1, false, 0 },
@@ -158,6 +165,10 @@ static const struct imx_sc_pd_range imx8qxp_scu_pd_ranges[] = {
 	/* DC SS */
 	{ "dc0", IMX_SC_R_DC_0, 1, false, 0 },
 	{ "dc0-pll", IMX_SC_R_DC_0_PLL_0, 2, true, 0 },
+
+	/* CM40 SS */
+	{ "cm40_i2c", IMX_SC_R_M4_0_I2C, 1, 0 },
+	{ "cm40_intmux", IMX_SC_R_M4_0_INTMUX, 1, 0 },
 };
 
 static const struct imx_sc_pd_soc imx8qxp_scu_pd = {
diff --git a/drivers/firmware/meson/meson_sm.c b/drivers/firmware/meson/meson_sm.c
index 1d5b4d7..2854b56 100644
--- a/drivers/firmware/meson/meson_sm.c
+++ b/drivers/firmware/meson/meson_sm.c
@@ -44,6 +44,8 @@ static const struct meson_sm_chip gxbb_chip = {
 		CMD(SM_EFUSE_WRITE,	0x82000031),
 		CMD(SM_EFUSE_USER_MAX,	0x82000033),
 		CMD(SM_GET_CHIP_ID,	0x82000044),
+		CMD(SM_A1_PWRC_SET,	0x82000093),
+		CMD(SM_A1_PWRC_GET,	0x82000095),
 		{ /* sentinel */ },
 	},
 };
diff --git a/drivers/firmware/stratix10-svc.c b/drivers/firmware/stratix10-svc.c
index 7ffb42b..d5f0769 100644
--- a/drivers/firmware/stratix10-svc.c
+++ b/drivers/firmware/stratix10-svc.c
@@ -966,6 +966,7 @@ EXPORT_SYMBOL_GPL(stratix10_svc_free_memory);
 
 static const struct of_device_id stratix10_svc_drv_match[] = {
 	{.compatible = "intel,stratix10-svc"},
+	{.compatible = "intel,agilex-svc"},
 	{},
 };
 
diff --git a/drivers/firmware/tegra/Kconfig b/drivers/firmware/tegra/Kconfig
index a887731..1c8ba1f 100644
--- a/drivers/firmware/tegra/Kconfig
+++ b/drivers/firmware/tegra/Kconfig
@@ -7,7 +7,7 @@
 	help
 	  IVC (Inter-VM Communication) protocol is part of the IPC
 	  (Inter Processor Communication) framework on Tegra. It maintains the
-	  data and the different commuication channels in SysRAM or RAM and
+	  data and the different communication channels in SysRAM or RAM and
 	  keeps the content is synchronization between host CPU and remote
 	  processors.
 
diff --git a/drivers/firmware/xilinx/Kconfig b/drivers/firmware/xilinx/Kconfig
index bd33bbf..9a9bd19 100644
--- a/drivers/firmware/xilinx/Kconfig
+++ b/drivers/firmware/xilinx/Kconfig
@@ -6,6 +6,8 @@
 
 config ZYNQMP_FIRMWARE
 	bool "Enable Xilinx Zynq MPSoC firmware interface"
+	depends on ARCH_ZYNQMP
+	default y if ARCH_ZYNQMP
 	select MFD_CORE
 	help
 	  Firmware interface driver is used by different
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index b8013cf..1b96169 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -394,13 +394,13 @@
 
 config GPIO_MXC
 	def_bool y
-	depends on ARCH_MXC
+	depends on ARCH_MXC || COMPILE_TEST
 	select GPIO_GENERIC
 	select GENERIC_IRQ_CHIP
 
 config GPIO_MXS
 	def_bool y
-	depends on ARCH_MXS
+	depends on ARCH_MXS || COMPILE_TEST
 	select GPIO_GENERIC
 	select GENERIC_IRQ_CHIP
 
@@ -1399,6 +1399,13 @@
 	help
 	  Say Y here if you want GPIO support on Mellanox BlueField SoC.
 
+config GPIO_MLXBF2
+	tristate "Mellanox BlueField 2 SoC GPIO"
+	depends on (MELLANOX_PLATFORM && ARM64 && ACPI) || (64BIT && COMPILE_TEST)
+	select GPIO_GENERIC
+	help
+	  Say Y here if you want GPIO support on Mellanox BlueField 2 SoC.
+
 config GPIO_ML_IOH
 	tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support"
 	depends on X86 || COMPILE_TEST
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 0b57126..b2cfc21 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -93,6 +93,7 @@
 obj-$(CONFIG_GPIO_MERRIFIELD)		+= gpio-merrifield.o
 obj-$(CONFIG_GPIO_ML_IOH)		+= gpio-ml-ioh.o
 obj-$(CONFIG_GPIO_MLXBF)		+= gpio-mlxbf.o
+obj-$(CONFIG_GPIO_MLXBF2)		+= gpio-mlxbf2.o
 obj-$(CONFIG_GPIO_MM_LANTIQ)		+= gpio-mm-lantiq.o
 obj-$(CONFIG_GPIO_MOCKUP)		+= gpio-mockup.o
 obj-$(CONFIG_GPIO_MOXTET)		+= gpio-moxtet.o
diff --git a/drivers/gpio/gpio-brcmstb.c b/drivers/gpio/gpio-brcmstb.c
index 05e3f99..fcfc1a1 100644
--- a/drivers/gpio/gpio-brcmstb.c
+++ b/drivers/gpio/gpio-brcmstb.c
@@ -603,6 +603,49 @@ static const struct dev_pm_ops brcmstb_gpio_pm_ops = {
 	.resume_noirq = brcmstb_gpio_resume,
 };
 
+static void brcmstb_gpio_set_names(struct device *dev,
+				   struct brcmstb_gpio_bank *bank)
+{
+	struct device_node *np = dev->of_node;
+	const char **names;
+	int nstrings, base;
+	unsigned int i;
+
+	base = bank->id * MAX_GPIO_PER_BANK;
+
+	nstrings = of_property_count_strings(np, "gpio-line-names");
+	if (nstrings <= base)
+		/* Line names not present */
+		return;
+
+	names = devm_kcalloc(dev, MAX_GPIO_PER_BANK, sizeof(*names),
+			     GFP_KERNEL);
+	if (!names)
+		return;
+
+	/*
+	 * Make sure to not index beyond the end of the number of descriptors
+	 * of the GPIO device.
+	 */
+	for (i = 0; i < bank->width; i++) {
+		const char *name;
+		int ret;
+
+		ret = of_property_read_string_index(np, "gpio-line-names",
+						    base + i, &name);
+		if (ret) {
+			if (ret != -ENODATA)
+				dev_err(dev, "unable to name line %d: %d\n",
+					base + i, ret);
+			break;
+		}
+		if (*name)
+			names[i] = name;
+	}
+
+	bank->gc.names = names;
+}
+
 static int brcmstb_gpio_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -726,6 +769,7 @@ static int brcmstb_gpio_probe(struct platform_device *pdev)
 		need_wakeup_event |= !!__brcmstb_gpio_get_active_irqs(bank);
 		gc->write_reg(reg_base + GIO_MASK(bank->id), 0);
 
+		brcmstb_gpio_set_names(dev, bank);
 		err = gpiochip_add_data(gc, bank);
 		if (err) {
 			dev_err(dev, "Could not add gpiochip for bank %d\n",
diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c
index e0b0256..085b874 100644
--- a/drivers/gpio/gpio-davinci.c
+++ b/drivers/gpio/gpio-davinci.c
@@ -259,11 +259,8 @@ static int davinci_gpio_probe(struct platform_device *pdev)
 	chips->chip.of_gpio_n_cells = 2;
 	chips->chip.parent = dev;
 	chips->chip.of_node = dev->of_node;
-
-	if (of_property_read_bool(dev->of_node, "gpio-ranges")) {
-		chips->chip.request = gpiochip_generic_request;
-		chips->chip.free = gpiochip_generic_free;
-	}
+	chips->chip.request = gpiochip_generic_request;
+	chips->chip.free = gpiochip_generic_free;
 #endif
 	spin_lock_init(&chips->lock);
 
diff --git a/drivers/gpio/gpio-eic-sprd.c b/drivers/gpio/gpio-eic-sprd.c
index bb287f3..8c97577 100644
--- a/drivers/gpio/gpio-eic-sprd.c
+++ b/drivers/gpio/gpio-eic-sprd.c
@@ -569,6 +569,7 @@ static int sprd_eic_probe(struct platform_device *pdev)
 	const struct sprd_eic_variant_data *pdata;
 	struct gpio_irq_chip *irq;
 	struct sprd_eic *sprd_eic;
+	struct resource *res;
 	int ret, i;
 
 	pdata = of_device_get_match_data(&pdev->dev);
@@ -595,9 +596,13 @@ static int sprd_eic_probe(struct platform_device *pdev)
 		 * have one bank EIC, thus base[1] and base[2] can be
 		 * optional.
 		 */
-		sprd_eic->base[i] = devm_platform_ioremap_resource(pdev, i);
-		if (IS_ERR(sprd_eic->base[i]))
+		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+		if (!res)
 			continue;
+
+		sprd_eic->base[i] = devm_ioremap_resource(&pdev->dev, res);
+		if (IS_ERR(sprd_eic->base[i]))
+			return PTR_ERR(sprd_eic->base[i]);
 	}
 
 	sprd_eic->chip.label = sprd_eic_label_name[sprd_eic->type];
diff --git a/drivers/gpio/gpio-mlxbf2.c b/drivers/gpio/gpio-mlxbf2.c
new file mode 100644
index 0000000..7b70850
--- /dev/null
+++ b/drivers/gpio/gpio-mlxbf2.c
@@ -0,0 +1,335 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/acpi.h>
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/gpio/driver.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/resource.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/version.h>
+
+/*
+ * There are 3 YU GPIO blocks:
+ * gpio[0]: HOST_GPIO0->HOST_GPIO31
+ * gpio[1]: HOST_GPIO32->HOST_GPIO63
+ * gpio[2]: HOST_GPIO64->HOST_GPIO69
+ */
+#define MLXBF2_GPIO_MAX_PINS_PER_BLOCK 32
+
+/*
+ * arm_gpio_lock register:
+ * bit[31]	lock status: active if set
+ * bit[15:0]	set lock
+ * The lock is enabled only if 0xd42f is written to this field
+ */
+#define YU_ARM_GPIO_LOCK_ADDR		0x2801088
+#define YU_ARM_GPIO_LOCK_SIZE		0x8
+#define YU_LOCK_ACTIVE_BIT(val)		(val >> 31)
+#define YU_ARM_GPIO_LOCK_ACQUIRE	0xd42f
+#define YU_ARM_GPIO_LOCK_RELEASE	0x0
+
+/*
+ * gpio[x] block registers and their offset
+ */
+#define YU_GPIO_DATAIN			0x04
+#define YU_GPIO_MODE1			0x08
+#define YU_GPIO_MODE0			0x0c
+#define YU_GPIO_DATASET			0x14
+#define YU_GPIO_DATACLEAR		0x18
+#define YU_GPIO_MODE1_CLEAR		0x50
+#define YU_GPIO_MODE0_SET		0x54
+#define YU_GPIO_MODE0_CLEAR		0x58
+
+#ifdef CONFIG_PM
+struct mlxbf2_gpio_context_save_regs {
+	u32 gpio_mode0;
+	u32 gpio_mode1;
+};
+#endif
+
+/* BlueField-2 gpio block context structure. */
+struct mlxbf2_gpio_context {
+	struct gpio_chip gc;
+
+	/* YU GPIO blocks address */
+	void __iomem *gpio_io;
+
+#ifdef CONFIG_PM
+	struct mlxbf2_gpio_context_save_regs *csave_regs;
+#endif
+};
+
+/* BlueField-2 gpio shared structure. */
+struct mlxbf2_gpio_param {
+	void __iomem *io;
+	struct resource *res;
+	struct mutex *lock;
+};
+
+static struct resource yu_arm_gpio_lock_res = {
+	.start = YU_ARM_GPIO_LOCK_ADDR,
+	.end   = YU_ARM_GPIO_LOCK_ADDR + YU_ARM_GPIO_LOCK_SIZE - 1,
+	.name  = "YU_ARM_GPIO_LOCK",
+};
+
+static DEFINE_MUTEX(yu_arm_gpio_lock_mutex);
+
+static struct mlxbf2_gpio_param yu_arm_gpio_lock_param = {
+	.res = &yu_arm_gpio_lock_res,
+	.lock = &yu_arm_gpio_lock_mutex,
+};
+
+/* Request memory region and map yu_arm_gpio_lock resource */
+static int mlxbf2_gpio_get_lock_res(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	resource_size_t size;
+	int ret = 0;
+
+	mutex_lock(yu_arm_gpio_lock_param.lock);
+
+	/* Check if the memory map already exists */
+	if (yu_arm_gpio_lock_param.io)
+		goto exit;
+
+	res = yu_arm_gpio_lock_param.res;
+	size = resource_size(res);
+
+	if (!devm_request_mem_region(dev, res->start, size, res->name)) {
+		ret = -EFAULT;
+		goto exit;
+	}
+
+	yu_arm_gpio_lock_param.io = devm_ioremap(dev, res->start, size);
+	if (IS_ERR(yu_arm_gpio_lock_param.io))
+		ret = PTR_ERR(yu_arm_gpio_lock_param.io);
+
+exit:
+	mutex_unlock(yu_arm_gpio_lock_param.lock);
+
+	return ret;
+}
+
+/*
+ * Acquire the YU arm_gpio_lock to be able to change the direction
+ * mode. If the lock_active bit is already set, return an error.
+ */
+static int mlxbf2_gpio_lock_acquire(struct mlxbf2_gpio_context *gs)
+{
+	u32 arm_gpio_lock_val;
+
+	spin_lock(&gs->gc.bgpio_lock);
+	mutex_lock(yu_arm_gpio_lock_param.lock);
+
+	arm_gpio_lock_val = readl(yu_arm_gpio_lock_param.io);
+
+	/*
+	 * When lock active bit[31] is set, ModeX is write enabled
+	 */
+	if (YU_LOCK_ACTIVE_BIT(arm_gpio_lock_val)) {
+		mutex_unlock(yu_arm_gpio_lock_param.lock);
+		spin_unlock(&gs->gc.bgpio_lock);
+		return -EINVAL;
+	}
+
+	writel(YU_ARM_GPIO_LOCK_ACQUIRE, yu_arm_gpio_lock_param.io);
+
+	return 0;
+}
+
+/*
+ * Release the YU arm_gpio_lock after changing the direction mode.
+ */
+static void mlxbf2_gpio_lock_release(struct mlxbf2_gpio_context *gs)
+{
+	writel(YU_ARM_GPIO_LOCK_RELEASE, yu_arm_gpio_lock_param.io);
+	mutex_unlock(yu_arm_gpio_lock_param.lock);
+	spin_unlock(&gs->gc.bgpio_lock);
+}
+
+/*
+ * mode0 and mode1 are both locked by the gpio_lock field.
+ *
+ * Together, mode0 and mode1 define the gpio Mode dependeing also
+ * on Reg_DataOut.
+ *
+ * {mode1,mode0}:{Reg_DataOut=0,Reg_DataOut=1}->{DataOut=0,DataOut=1}
+ *
+ * {0,0}:Reg_DataOut{0,1}->{Z,Z} Input PAD
+ * {0,1}:Reg_DataOut{0,1}->{0,1} Full drive Output PAD
+ * {1,0}:Reg_DataOut{0,1}->{0,Z} 0-set PAD to low, 1-float
+ * {1,1}:Reg_DataOut{0,1}->{Z,1} 0-float, 1-set PAD to high
+ */
+
+/*
+ * Set input direction:
+ * {mode1,mode0} = {0,0}
+ */
+static int mlxbf2_gpio_direction_input(struct gpio_chip *chip,
+				       unsigned int offset)
+{
+	struct mlxbf2_gpio_context *gs = gpiochip_get_data(chip);
+	int ret;
+
+	/*
+	 * Although the arm_gpio_lock was set in the probe function, check again
+	 * if it is still enabled to be able to write to the ModeX registers.
+	 */
+	ret = mlxbf2_gpio_lock_acquire(gs);
+	if (ret < 0)
+		return ret;
+
+	writel(BIT(offset), gs->gpio_io + YU_GPIO_MODE0_CLEAR);
+	writel(BIT(offset), gs->gpio_io + YU_GPIO_MODE1_CLEAR);
+
+	mlxbf2_gpio_lock_release(gs);
+
+	return ret;
+}
+
+/*
+ * Set output direction:
+ * {mode1,mode0} = {0,1}
+ */
+static int mlxbf2_gpio_direction_output(struct gpio_chip *chip,
+					unsigned int offset,
+					int value)
+{
+	struct mlxbf2_gpio_context *gs = gpiochip_get_data(chip);
+	int ret = 0;
+
+	/*
+	 * Although the arm_gpio_lock was set in the probe function,
+	 * check again it is still enabled to be able to write to the
+	 * ModeX registers.
+	 */
+	ret = mlxbf2_gpio_lock_acquire(gs);
+	if (ret < 0)
+		return ret;
+
+	writel(BIT(offset), gs->gpio_io + YU_GPIO_MODE1_CLEAR);
+	writel(BIT(offset), gs->gpio_io + YU_GPIO_MODE0_SET);
+
+	mlxbf2_gpio_lock_release(gs);
+
+	return ret;
+}
+
+/* BlueField-2 GPIO driver initialization routine. */
+static int
+mlxbf2_gpio_probe(struct platform_device *pdev)
+{
+	struct mlxbf2_gpio_context *gs;
+	struct device *dev = &pdev->dev;
+	struct gpio_chip *gc;
+	struct resource *res;
+	unsigned int npins;
+	int ret;
+
+	gs = devm_kzalloc(dev, sizeof(*gs), GFP_KERNEL);
+	if (!gs)
+		return -ENOMEM;
+
+	/* YU GPIO block address */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	gs->gpio_io = devm_ioremap(dev, res->start, resource_size(res));
+	if (!gs->gpio_io)
+		return -ENOMEM;
+
+	ret = mlxbf2_gpio_get_lock_res(pdev);
+	if (ret) {
+		dev_err(dev, "Failed to get yu_arm_gpio_lock resource\n");
+		return ret;
+	}
+
+	if (device_property_read_u32(dev, "npins", &npins))
+		npins = MLXBF2_GPIO_MAX_PINS_PER_BLOCK;
+
+	gc = &gs->gc;
+
+	ret = bgpio_init(gc, dev, 4,
+			gs->gpio_io + YU_GPIO_DATAIN,
+			gs->gpio_io + YU_GPIO_DATASET,
+			gs->gpio_io + YU_GPIO_DATACLEAR,
+			NULL,
+			NULL,
+			0);
+
+	gc->direction_input = mlxbf2_gpio_direction_input;
+	gc->direction_output = mlxbf2_gpio_direction_output;
+	gc->ngpio = npins;
+	gc->owner = THIS_MODULE;
+
+	platform_set_drvdata(pdev, gs);
+
+	ret = devm_gpiochip_add_data(dev, &gs->gc, gs);
+	if (ret) {
+		dev_err(dev, "Failed adding memory mapped gpiochip\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int mlxbf2_gpio_suspend(struct platform_device *pdev,
+				pm_message_t state)
+{
+	struct mlxbf2_gpio_context *gs = platform_get_drvdata(pdev);
+
+	gs->csave_regs->gpio_mode0 = readl(gs->gpio_io +
+		YU_GPIO_MODE0);
+	gs->csave_regs->gpio_mode1 = readl(gs->gpio_io +
+		YU_GPIO_MODE1);
+
+	return 0;
+}
+
+static int mlxbf2_gpio_resume(struct platform_device *pdev)
+{
+	struct mlxbf2_gpio_context *gs = platform_get_drvdata(pdev);
+
+	writel(gs->csave_regs->gpio_mode0, gs->gpio_io +
+		YU_GPIO_MODE0);
+	writel(gs->csave_regs->gpio_mode1, gs->gpio_io +
+		YU_GPIO_MODE1);
+
+	return 0;
+}
+#endif
+
+static const struct acpi_device_id mlxbf2_gpio_acpi_match[] = {
+	{ "MLNXBF22", 0 },
+	{},
+};
+MODULE_DEVICE_TABLE(acpi, mlxbf2_gpio_acpi_match);
+
+static struct platform_driver mlxbf2_gpio_driver = {
+	.driver = {
+		.name = "mlxbf2_gpio",
+		.acpi_match_table = ACPI_PTR(mlxbf2_gpio_acpi_match),
+	},
+	.probe    = mlxbf2_gpio_probe,
+#ifdef CONFIG_PM
+	.suspend  = mlxbf2_gpio_suspend,
+	.resume   = mlxbf2_gpio_resume,
+#endif
+};
+
+module_platform_driver(mlxbf2_gpio_driver);
+
+MODULE_DESCRIPTION("Mellanox BlueField-2 GPIO Driver");
+MODULE_AUTHOR("Mellanox Technologies");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-mmio.c b/drivers/gpio/gpio-mmio.c
index f729e3e..b778f33 100644
--- a/drivers/gpio/gpio-mmio.c
+++ b/drivers/gpio/gpio-mmio.c
@@ -389,12 +389,10 @@ static int bgpio_get_dir(struct gpio_chip *gc, unsigned int gpio)
 	return GPIO_LINE_DIRECTION_IN;
 }
 
-static int bgpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+static void bgpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
 {
 	unsigned long flags;
 
-	gc->set(gc, gpio, val);
-
 	spin_lock_irqsave(&gc->bgpio_lock, flags);
 
 	gc->bgpio_dir |= bgpio_line2mask(gc, gpio);
@@ -405,7 +403,21 @@ static int bgpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
 		gc->write_reg(gc->reg_dir_out, gc->bgpio_dir);
 
 	spin_unlock_irqrestore(&gc->bgpio_lock, flags);
+}
 
+static int bgpio_dir_out_dir_first(struct gpio_chip *gc, unsigned int gpio,
+				   int val)
+{
+	bgpio_dir_out(gc, gpio, val);
+	gc->set(gc, gpio, val);
+	return 0;
+}
+
+static int bgpio_dir_out_val_first(struct gpio_chip *gc, unsigned int gpio,
+				   int val)
+{
+	gc->set(gc, gpio, val);
+	bgpio_dir_out(gc, gpio, val);
 	return 0;
 }
 
@@ -538,7 +550,10 @@ static int bgpio_setup_direction(struct gpio_chip *gc,
 	if (dirout || dirin) {
 		gc->reg_dir_out = dirout;
 		gc->reg_dir_in = dirin;
-		gc->direction_output = bgpio_dir_out;
+		if (flags & BGPIOF_NO_SET_ON_INPUT)
+			gc->direction_output = bgpio_dir_out_dir_first;
+		else
+			gc->direction_output = bgpio_dir_out_val_first;
 		gc->direction_input = bgpio_dir_in;
 		gc->get_direction = bgpio_get_dir;
 	} else {
diff --git a/drivers/gpio/gpio-mockup.c b/drivers/gpio/gpio-mockup.c
index 7d343be..3eb94f3 100644
--- a/drivers/gpio/gpio-mockup.c
+++ b/drivers/gpio/gpio-mockup.c
@@ -171,7 +171,7 @@ static int gpio_mockup_apply_pull(struct gpio_mockup_chip *chip,
 
 	/* Change the value unless we're actively driving the line. */
 	if (!test_bit(FLAG_REQUESTED, &desc->flags) ||
-		!test_bit(FLAG_IS_OUT, &desc->flags))
+	    !test_bit(FLAG_IS_OUT, &desc->flags))
 		__gpio_mockup_set(chip, offset, value);
 
 out:
diff --git a/drivers/gpio/gpio-mt7621.c b/drivers/gpio/gpio-mt7621.c
index b992321..82fb20d 100644
--- a/drivers/gpio/gpio-mt7621.c
+++ b/drivers/gpio/gpio-mt7621.c
@@ -227,8 +227,8 @@ mediatek_gpio_bank_probe(struct device *dev,
 	ctrl = mtk->base + GPIO_REG_DCLR + (rg->bank * GPIO_BANK_STRIDE);
 	diro = mtk->base + GPIO_REG_CTRL + (rg->bank * GPIO_BANK_STRIDE);
 
-	ret = bgpio_init(&rg->chip, dev, 4,
-			 dat, set, ctrl, diro, NULL, 0);
+	ret = bgpio_init(&rg->chip, dev, 4, dat, set, ctrl, diro, NULL,
+			 BGPIOF_NO_SET_ON_INPUT);
 	if (ret) {
 		dev_err(dev, "bgpio_init() failed\n");
 		return ret;
diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c
index d2b999c..3c9f4fb 100644
--- a/drivers/gpio/gpio-mvebu.c
+++ b/drivers/gpio/gpio-mvebu.c
@@ -1247,7 +1247,7 @@ static int mvebu_gpio_probe(struct platform_device *pdev)
 	 * pins.
 	 */
 	for (i = 0; i < 4; i++) {
-		int irq = platform_get_irq(pdev, i);
+		int irq = platform_get_irq_optional(pdev, i);
 
 		if (irq < 0)
 			continue;
diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
index c77d474..64278a4 100644
--- a/drivers/gpio/gpio-mxc.c
+++ b/drivers/gpio/gpio-mxc.c
@@ -485,11 +485,8 @@ static int mxc_gpio_probe(struct platform_device *pdev)
 	if (err)
 		goto out_bgio;
 
-	if (of_property_read_bool(np, "gpio-ranges")) {
-		port->gc.request = gpiochip_generic_request;
-		port->gc.free = gpiochip_generic_free;
-	}
-
+	port->gc.request = gpiochip_generic_request;
+	port->gc.free = gpiochip_generic_free;
 	port->gc.to_irq = mxc_gpio_to_irq;
 	port->gc.base = (pdev->id < 0) ? of_alias_get_id(np, "gpio") * 32 :
 					     pdev->id * 32;
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 3bd8ada..b8e2ecc 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -1102,23 +1102,13 @@ static void omap_gpio_idle(struct gpio_bank *bank, bool may_lose_context)
 {
 	struct device *dev = bank->chip.parent;
 	void __iomem *base = bank->base;
-	u32 mask, nowake;
+	u32 nowake;
 
 	bank->saved_datain = readl_relaxed(base + bank->regs->datain);
 
 	if (!bank->enabled_non_wakeup_gpios)
 		goto update_gpio_context_count;
 
-	/* Check for pending EDGE_FALLING, ignore EDGE_BOTH */
-	mask = bank->enabled_non_wakeup_gpios & bank->context.fallingdetect;
-	mask &= ~bank->context.risingdetect;
-	bank->saved_datain |= mask;
-
-	/* Check for pending EDGE_RISING, ignore EDGE_BOTH */
-	mask = bank->enabled_non_wakeup_gpios & bank->context.risingdetect;
-	mask &= ~bank->context.fallingdetect;
-	bank->saved_datain &= ~mask;
-
 	if (!may_lose_context)
 		goto update_gpio_context_count;
 
@@ -1237,26 +1227,35 @@ static int gpio_omap_cpu_notifier(struct notifier_block *nb,
 {
 	struct gpio_bank *bank;
 	unsigned long flags;
+	int ret = NOTIFY_OK;
+	u32 isr, mask;
 
 	bank = container_of(nb, struct gpio_bank, nb);
 
 	raw_spin_lock_irqsave(&bank->lock, flags);
+	if (bank->is_suspended)
+		goto out_unlock;
+
 	switch (cmd) {
 	case CPU_CLUSTER_PM_ENTER:
-		if (bank->is_suspended)
+		mask = omap_get_gpio_irqbank_mask(bank);
+		isr = readl_relaxed(bank->base + bank->regs->irqstatus) & mask;
+		if (isr) {
+			ret = NOTIFY_BAD;
 			break;
+		}
 		omap_gpio_idle(bank, true);
 		break;
 	case CPU_CLUSTER_PM_ENTER_FAILED:
 	case CPU_CLUSTER_PM_EXIT:
-		if (bank->is_suspended)
-			break;
 		omap_gpio_unidle(bank);
 		break;
 	}
+
+out_unlock:
 	raw_spin_unlock_irqrestore(&bank->lock, flags);
 
-	return NOTIFY_OK;
+	return ret;
 }
 
 static const struct omap_gpio_reg_offs omap2_gpio_regs = {
diff --git a/drivers/gpio/gpio-pl061.c b/drivers/gpio/gpio-pl061.c
index 5df7782..e241fb8 100644
--- a/drivers/gpio/gpio-pl061.c
+++ b/drivers/gpio/gpio-pl061.c
@@ -298,11 +298,8 @@ static int pl061_probe(struct amba_device *adev, const struct amba_id *id)
 		return PTR_ERR(pl061->base);
 
 	raw_spin_lock_init(&pl061->lock);
-	if (of_property_read_bool(dev->of_node, "gpio-ranges")) {
-		pl061->gc.request = gpiochip_generic_request;
-		pl061->gc.free = gpiochip_generic_free;
-	}
-
+	pl061->gc.request = gpiochip_generic_request;
+	pl061->gc.free = gpiochip_generic_free;
 	pl061->gc.base = -1;
 	pl061->gc.get_direction = pl061_get_direction;
 	pl061->gc.direction_input = pl061_direction_input;
@@ -326,10 +323,8 @@ static int pl061_probe(struct amba_device *adev, const struct amba_id *id)
 
 	writeb(0, pl061->base + GPIOIE); /* disable irqs */
 	irq = adev->irq[0];
-	if (irq < 0) {
-		dev_err(&adev->dev, "invalid IRQ\n");
-		return -ENODEV;
-	}
+	if (!irq)
+		dev_warn(&adev->dev, "IRQ support disabled\n");
 	pl061->parent_irq = irq;
 
 	girq = &pl061->gc.irq;
diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c
index 9888b62..1361270 100644
--- a/drivers/gpio/gpio-pxa.c
+++ b/drivers/gpio/gpio-pxa.c
@@ -361,11 +361,8 @@ static int pxa_init_gpio_chip(struct pxa_gpio_chip *pchip, int ngpio,
 	pchip->chip.set = pxa_gpio_set;
 	pchip->chip.to_irq = pxa_gpio_to_irq;
 	pchip->chip.ngpio = ngpio;
-
-	if (pxa_gpio_has_pinctrl()) {
-		pchip->chip.request = gpiochip_generic_request;
-		pchip->chip.free = gpiochip_generic_free;
-	}
+	pchip->chip.request = gpiochip_generic_request;
+	pchip->chip.free = gpiochip_generic_free;
 
 #ifdef CONFIG_OF_GPIO
 	pchip->chip.of_node = np;
@@ -652,8 +649,8 @@ static int pxa_gpio_probe(struct platform_device *pdev)
 	if (!pchip->irqdomain)
 		return -ENOMEM;
 
-	irq0 = platform_get_irq_byname(pdev, "gpio0");
-	irq1 = platform_get_irq_byname(pdev, "gpio1");
+	irq0 = platform_get_irq_byname_optional(pdev, "gpio0");
+	irq1 = platform_get_irq_byname_optional(pdev, "gpio1");
 	irq_mux = platform_get_irq_byname(pdev, "gpio_mux");
 	if ((irq0 > 0 && irq1 <= 0) || (irq0 <= 0 && irq1 > 0)
 		|| (irq_mux <= 0))
diff --git a/drivers/gpio/gpio-rcar.c b/drivers/gpio/gpio-rcar.c
index f800b25..7284473 100644
--- a/drivers/gpio/gpio-rcar.c
+++ b/drivers/gpio/gpio-rcar.c
@@ -116,7 +116,7 @@ static void gpio_rcar_config_interrupt_input_mode(struct gpio_rcar_priv *p,
 
 	spin_lock_irqsave(&p->lock, flags);
 
-	/* Configure postive or negative logic in POSNEG */
+	/* Configure positive or negative logic in POSNEG */
 	gpio_rcar_modify_bit(p, POSNEG, hwirq, !active_high_rising_edge);
 
 	/* Configure edge or level trigger in EDGLEVEL */
@@ -228,7 +228,7 @@ static void gpio_rcar_config_general_input_output_mode(struct gpio_chip *chip,
 
 	spin_lock_irqsave(&p->lock, flags);
 
-	/* Configure postive logic in POSNEG */
+	/* Configure positive logic in POSNEG */
 	gpio_rcar_modify_bit(p, POSNEG, gpio, false);
 
 	/* Select "General Input/Output Mode" in IOINTSEL */
diff --git a/drivers/gpio/gpio-siox.c b/drivers/gpio/gpio-siox.c
index 311f667..26e1fe0 100644
--- a/drivers/gpio/gpio-siox.c
+++ b/drivers/gpio/gpio-siox.c
@@ -15,7 +15,7 @@ struct gpio_siox_ddata {
 	u8 setdata[1];
 	u8 getdata[3];
 
-	spinlock_t irqlock;
+	raw_spinlock_t irqlock;
 	u32 irq_enable;
 	u32 irq_status;
 	u32 irq_type[20];
@@ -44,7 +44,7 @@ static int gpio_siox_get_data(struct siox_device *sdevice, const u8 buf[])
 
 	mutex_lock(&ddata->lock);
 
-	spin_lock_irq(&ddata->irqlock);
+	raw_spin_lock_irq(&ddata->irqlock);
 
 	for (offset = 0; offset < 12; ++offset) {
 		unsigned int bitpos = 11 - offset;
@@ -66,7 +66,7 @@ static int gpio_siox_get_data(struct siox_device *sdevice, const u8 buf[])
 
 	trigger = ddata->irq_status & ddata->irq_enable;
 
-	spin_unlock_irq(&ddata->irqlock);
+	raw_spin_unlock_irq(&ddata->irqlock);
 
 	ddata->getdata[0] = buf[0];
 	ddata->getdata[1] = buf[1];
@@ -84,9 +84,9 @@ static int gpio_siox_get_data(struct siox_device *sdevice, const u8 buf[])
 			 * handler of the irq chip. But it doesn't, so we have
 			 * to clean the irq_status here.
 			 */
-			spin_lock_irq(&ddata->irqlock);
+			raw_spin_lock_irq(&ddata->irqlock);
 			ddata->irq_status &= ~(1 << offset);
-			spin_unlock_irq(&ddata->irqlock);
+			raw_spin_unlock_irq(&ddata->irqlock);
 
 			handle_nested_irq(irq);
 		}
@@ -101,9 +101,9 @@ static void gpio_siox_irq_ack(struct irq_data *d)
 	struct gpio_siox_ddata *ddata =
 		container_of(ic, struct gpio_siox_ddata, ichip);
 
-	spin_lock_irq(&ddata->irqlock);
+	raw_spin_lock(&ddata->irqlock);
 	ddata->irq_status &= ~(1 << d->hwirq);
-	spin_unlock_irq(&ddata->irqlock);
+	raw_spin_unlock(&ddata->irqlock);
 }
 
 static void gpio_siox_irq_mask(struct irq_data *d)
@@ -112,9 +112,9 @@ static void gpio_siox_irq_mask(struct irq_data *d)
 	struct gpio_siox_ddata *ddata =
 		container_of(ic, struct gpio_siox_ddata, ichip);
 
-	spin_lock_irq(&ddata->irqlock);
+	raw_spin_lock(&ddata->irqlock);
 	ddata->irq_enable &= ~(1 << d->hwirq);
-	spin_unlock_irq(&ddata->irqlock);
+	raw_spin_unlock(&ddata->irqlock);
 }
 
 static void gpio_siox_irq_unmask(struct irq_data *d)
@@ -123,9 +123,9 @@ static void gpio_siox_irq_unmask(struct irq_data *d)
 	struct gpio_siox_ddata *ddata =
 		container_of(ic, struct gpio_siox_ddata, ichip);
 
-	spin_lock_irq(&ddata->irqlock);
+	raw_spin_lock(&ddata->irqlock);
 	ddata->irq_enable |= 1 << d->hwirq;
-	spin_unlock_irq(&ddata->irqlock);
+	raw_spin_unlock(&ddata->irqlock);
 }
 
 static int gpio_siox_irq_set_type(struct irq_data *d, u32 type)
@@ -134,9 +134,9 @@ static int gpio_siox_irq_set_type(struct irq_data *d, u32 type)
 	struct gpio_siox_ddata *ddata =
 		container_of(ic, struct gpio_siox_ddata, ichip);
 
-	spin_lock_irq(&ddata->irqlock);
+	raw_spin_lock(&ddata->irqlock);
 	ddata->irq_type[d->hwirq] = type;
-	spin_unlock_irq(&ddata->irqlock);
+	raw_spin_unlock(&ddata->irqlock);
 
 	return 0;
 }
@@ -222,7 +222,7 @@ static int gpio_siox_probe(struct siox_device *sdevice)
 	dev_set_drvdata(dev, ddata);
 
 	mutex_init(&ddata->lock);
-	spin_lock_init(&ddata->irqlock);
+	raw_spin_lock_init(&ddata->irqlock);
 
 	ddata->gchip.base = -1;
 	ddata->gchip.can_sleep = 1;
diff --git a/drivers/gpio/gpio-tegra186.c b/drivers/gpio/gpio-tegra186.c
index de24126..79b553d 100644
--- a/drivers/gpio/gpio-tegra186.c
+++ b/drivers/gpio/gpio-tegra186.c
@@ -58,11 +58,20 @@ struct tegra_gpio_port {
 	unsigned int pins;
 };
 
+struct tegra186_pin_range {
+	unsigned int offset;
+	const char *group;
+};
+
 struct tegra_gpio_soc {
 	const struct tegra_gpio_port *ports;
 	unsigned int num_ports;
 	const char *name;
 	unsigned int instance;
+
+	const struct tegra186_pin_range *pin_ranges;
+	unsigned int num_pin_ranges;
+	const char *pinmux;
 };
 
 struct tegra_gpio {
@@ -254,6 +263,50 @@ static int tegra186_gpio_set_config(struct gpio_chip *chip,
 	return 0;
 }
 
+static int tegra186_gpio_add_pin_ranges(struct gpio_chip *chip)
+{
+	struct tegra_gpio *gpio = gpiochip_get_data(chip);
+	struct pinctrl_dev *pctldev;
+	struct device_node *np;
+	unsigned int i, j;
+	int err;
+
+	if (!gpio->soc->pinmux || gpio->soc->num_pin_ranges == 0)
+		return 0;
+
+	np = of_find_compatible_node(NULL, NULL, gpio->soc->pinmux);
+	if (!np)
+		return -ENODEV;
+
+	pctldev = of_pinctrl_get(np);
+	of_node_put(np);
+	if (!pctldev)
+		return -EPROBE_DEFER;
+
+	for (i = 0; i < gpio->soc->num_pin_ranges; i++) {
+		unsigned int pin = gpio->soc->pin_ranges[i].offset, port;
+		const char *group = gpio->soc->pin_ranges[i].group;
+
+		port = pin / 8;
+		pin = pin % 8;
+
+		if (port >= gpio->soc->num_ports) {
+			dev_warn(chip->parent, "invalid port %u for %s\n",
+				 port, group);
+			continue;
+		}
+
+		for (j = 0; j < port; j++)
+			pin += gpio->soc->ports[j].pins;
+
+		err = gpiochip_add_pingroup_range(chip, pctldev, pin, group);
+		if (err < 0)
+			return err;
+	}
+
+	return 0;
+}
+
 static int tegra186_gpio_of_xlate(struct gpio_chip *chip,
 				  const struct of_phandle_args *spec,
 				  u32 *flags)
@@ -578,12 +631,15 @@ static int tegra186_gpio_probe(struct platform_device *pdev)
 	gpio->gpio.label = gpio->soc->name;
 	gpio->gpio.parent = &pdev->dev;
 
+	gpio->gpio.request = gpiochip_generic_request;
+	gpio->gpio.free = gpiochip_generic_free;
 	gpio->gpio.get_direction = tegra186_gpio_get_direction;
 	gpio->gpio.direction_input = tegra186_gpio_direction_input;
 	gpio->gpio.direction_output = tegra186_gpio_direction_output;
 	gpio->gpio.get = tegra186_gpio_get,
 	gpio->gpio.set = tegra186_gpio_set;
 	gpio->gpio.set_config = tegra186_gpio_set_config;
+	gpio->gpio.add_pin_ranges = tegra186_gpio_add_pin_ranges;
 
 	gpio->gpio.base = -1;
 
@@ -783,11 +839,19 @@ static const struct tegra_gpio_port tegra194_main_ports[] = {
 	TEGRA194_MAIN_GPIO_PORT(GG, 0, 0, 2)
 };
 
+static const struct tegra186_pin_range tegra194_main_pin_ranges[] = {
+	{ TEGRA194_MAIN_GPIO(GG, 0), "pex_l5_clkreq_n_pgg0" },
+	{ TEGRA194_MAIN_GPIO(GG, 1), "pex_l5_rst_n_pgg1" },
+};
+
 static const struct tegra_gpio_soc tegra194_main_soc = {
 	.num_ports = ARRAY_SIZE(tegra194_main_ports),
 	.ports = tegra194_main_ports,
 	.name = "tegra194-gpio",
 	.instance = 0,
+	.num_pin_ranges = ARRAY_SIZE(tegra194_main_pin_ranges),
+	.pin_ranges = tegra194_main_pin_ranges,
+	.pinmux = "nvidia,tegra194-pinmux",
 };
 
 #define TEGRA194_AON_GPIO_PORT(_name, _bank, _port, _pins)	\
diff --git a/drivers/gpio/gpio-uniphier.c b/drivers/gpio/gpio-uniphier.c
index 7ec9749..f99f3c1 100644
--- a/drivers/gpio/gpio-uniphier.c
+++ b/drivers/gpio/gpio-uniphier.c
@@ -30,7 +30,7 @@ struct uniphier_gpio_priv {
 	struct irq_domain *domain;
 	void __iomem *regs;
 	spinlock_t lock;
-	u32 saved_vals[0];
+	u32 saved_vals[];
 };
 
 static unsigned int uniphier_gpio_bank_to_reg(unsigned int bank)
diff --git a/drivers/gpio/gpio-wcd934x.c b/drivers/gpio/gpio-wcd934x.c
index 74913f2..1cbce59 100644
--- a/drivers/gpio/gpio-wcd934x.c
+++ b/drivers/gpio/gpio-wcd934x.c
@@ -57,16 +57,19 @@ static int wcd_gpio_direction_output(struct gpio_chip *chip, unsigned int pin,
 static int wcd_gpio_get(struct gpio_chip *chip, unsigned int pin)
 {
 	struct wcd_gpio_data *data = gpiochip_get_data(chip);
-	int value;
+	unsigned int value;
 
 	regmap_read(data->map, WCD_REG_VAL_CTL_OFFSET, &value);
 
-	return !!(value && WCD_PIN_MASK(pin));
+	return !!(value & WCD_PIN_MASK(pin));
 }
 
 static void wcd_gpio_set(struct gpio_chip *chip, unsigned int pin, int val)
 {
-	wcd_gpio_direction_output(chip, pin, val);
+	struct wcd_gpio_data *data = gpiochip_get_data(chip);
+
+	regmap_update_bits(data->map, WCD_REG_VAL_CTL_OFFSET,
+			   WCD_PIN_MASK(pin), val ? WCD_PIN_MASK(pin) : 0);
 }
 
 static int wcd_gpio_probe(struct platform_device *pdev)
diff --git a/drivers/gpio/gpio-zx.c b/drivers/gpio/gpio-zx.c
index 98cbaf0..64bfb72 100644
--- a/drivers/gpio/gpio-zx.c
+++ b/drivers/gpio/gpio-zx.c
@@ -226,13 +226,11 @@ static int zx_gpio_probe(struct platform_device *pdev)
 	if (IS_ERR(chip->base))
 		return PTR_ERR(chip->base);
 
-	raw_spin_lock_init(&chip->lock);
-	if (of_property_read_bool(dev->of_node, "gpio-ranges")) {
-		chip->gc.request = gpiochip_generic_request;
-		chip->gc.free = gpiochip_generic_free;
-	}
-
 	id = of_alias_get_id(dev->of_node, "gpio");
+
+	raw_spin_lock_init(&chip->lock);
+	chip->gc.request = gpiochip_generic_request;
+	chip->gc.free = gpiochip_generic_free;
 	chip->gc.direction_input = zx_direction_input;
 	chip->gc.direction_output = zx_direction_output;
 	chip->gc.get = zx_get_value;
diff --git a/drivers/gpio/gpiolib-devres.c b/drivers/gpio/gpiolib-devres.c
index 72b6001..5c91c43 100644
--- a/drivers/gpio/gpiolib-devres.c
+++ b/drivers/gpio/gpiolib-devres.c
@@ -478,3 +478,49 @@ void devm_gpio_free(struct device *dev, unsigned int gpio)
 		&gpio));
 }
 EXPORT_SYMBOL_GPL(devm_gpio_free);
+
+static void devm_gpio_chip_release(struct device *dev, void *res)
+{
+	struct gpio_chip *gc = *(struct gpio_chip **)res;
+
+	gpiochip_remove(gc);
+}
+
+/**
+ * devm_gpiochip_add_data() - Resource managed gpiochip_add_data()
+ * @dev: pointer to the device that gpio_chip belongs to.
+ * @gc: the GPIO chip to register
+ * @data: driver-private data associated with this chip
+ *
+ * Context: potentially before irqs will work
+ *
+ * The gpio chip automatically be released when the device is unbound.
+ *
+ * Returns:
+ * A negative errno if the chip can't be registered, such as because the
+ * gc->base is invalid or already associated with a different chip.
+ * Otherwise it returns zero as a success code.
+ */
+int devm_gpiochip_add_data(struct device *dev, struct gpio_chip *gc,
+			   void *data)
+{
+	struct gpio_chip **ptr;
+	int ret;
+
+	ptr = devres_alloc(devm_gpio_chip_release, sizeof(*ptr),
+			     GFP_KERNEL);
+	if (!ptr)
+		return -ENOMEM;
+
+	ret = gpiochip_add_data(gc, data);
+	if (ret < 0) {
+		devres_free(ptr);
+		return ret;
+	}
+
+	*ptr = gc;
+	devres_add(dev, ptr);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(devm_gpiochip_add_data);
diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index c6d30f7..ccc449d 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -605,6 +605,39 @@ static struct gpio_desc *of_parse_own_gpio(struct device_node *np,
 }
 
 /**
+ * of_gpiochip_add_hog - Add all hogs in a hog device node
+ * @chip:	gpio chip to act on
+ * @hog:	device node describing the hogs
+ *
+ * Returns error if it fails otherwise 0 on success.
+ */
+static int of_gpiochip_add_hog(struct gpio_chip *chip, struct device_node *hog)
+{
+	enum gpiod_flags dflags;
+	struct gpio_desc *desc;
+	unsigned long lflags;
+	const char *name;
+	unsigned int i;
+	int ret;
+
+	for (i = 0;; i++) {
+		desc = of_parse_own_gpio(hog, chip, i, &name, &lflags, &dflags);
+		if (IS_ERR(desc))
+			break;
+
+		ret = gpiod_hog(desc, name, lflags, dflags);
+		if (ret < 0)
+			return ret;
+
+#ifdef CONFIG_OF_DYNAMIC
+		desc->hog = hog;
+#endif
+	}
+
+	return 0;
+}
+
+/**
  * of_gpiochip_scan_gpios - Scan gpio-controller for gpio definitions
  * @chip:	gpio chip to act on
  *
@@ -614,35 +647,109 @@ static struct gpio_desc *of_parse_own_gpio(struct device_node *np,
  */
 static int of_gpiochip_scan_gpios(struct gpio_chip *chip)
 {
-	struct gpio_desc *desc = NULL;
 	struct device_node *np;
-	const char *name;
-	unsigned long lflags;
-	enum gpiod_flags dflags;
-	unsigned int i;
 	int ret;
 
 	for_each_available_child_of_node(chip->of_node, np) {
 		if (!of_property_read_bool(np, "gpio-hog"))
 			continue;
 
-		for (i = 0;; i++) {
-			desc = of_parse_own_gpio(np, chip, i, &name, &lflags,
-						 &dflags);
-			if (IS_ERR(desc))
-				break;
-
-			ret = gpiod_hog(desc, name, lflags, dflags);
-			if (ret < 0) {
-				of_node_put(np);
-				return ret;
-			}
+		ret = of_gpiochip_add_hog(chip, np);
+		if (ret < 0) {
+			of_node_put(np);
+			return ret;
 		}
+
+		of_node_set_flag(np, OF_POPULATED);
 	}
 
 	return 0;
 }
 
+#ifdef CONFIG_OF_DYNAMIC
+/**
+ * of_gpiochip_remove_hog - Remove all hogs in a hog device node
+ * @chip:	gpio chip to act on
+ * @hog:	device node describing the hogs
+ */
+static void of_gpiochip_remove_hog(struct gpio_chip *chip,
+				   struct device_node *hog)
+{
+	struct gpio_desc *descs = chip->gpiodev->descs;
+	unsigned int i;
+
+	for (i = 0; i < chip->ngpio; i++) {
+		if (test_bit(FLAG_IS_HOGGED, &descs[i].flags) &&
+		    descs[i].hog == hog)
+			gpiochip_free_own_desc(&descs[i]);
+	}
+}
+
+static int of_gpiochip_match_node(struct gpio_chip *chip, void *data)
+{
+	return chip->gpiodev->dev.of_node == data;
+}
+
+static struct gpio_chip *of_find_gpiochip_by_node(struct device_node *np)
+{
+	return gpiochip_find(np, of_gpiochip_match_node);
+}
+
+static int of_gpio_notify(struct notifier_block *nb, unsigned long action,
+			  void *arg)
+{
+	struct of_reconfig_data *rd = arg;
+	struct gpio_chip *chip;
+	int ret;
+
+	/*
+	 * This only supports adding and removing complete gpio-hog nodes.
+	 * Modifying an existing gpio-hog node is not supported (except for
+	 * changing its "status" property, which is treated the same as
+	 * addition/removal).
+	 */
+	switch (of_reconfig_get_state_change(action, arg)) {
+	case OF_RECONFIG_CHANGE_ADD:
+		if (!of_property_read_bool(rd->dn, "gpio-hog"))
+			return NOTIFY_OK;	/* not for us */
+
+		if (of_node_test_and_set_flag(rd->dn, OF_POPULATED))
+			return NOTIFY_OK;
+
+		chip = of_find_gpiochip_by_node(rd->dn->parent);
+		if (chip == NULL)
+			return NOTIFY_OK;	/* not for us */
+
+		ret = of_gpiochip_add_hog(chip, rd->dn);
+		if (ret < 0) {
+			pr_err("%s: failed to add hogs for %pOF\n", __func__,
+			       rd->dn);
+			of_node_clear_flag(rd->dn, OF_POPULATED);
+			return notifier_from_errno(ret);
+		}
+		break;
+
+	case OF_RECONFIG_CHANGE_REMOVE:
+		if (!of_node_check_flag(rd->dn, OF_POPULATED))
+			return NOTIFY_OK;	/* already depopulated */
+
+		chip = of_find_gpiochip_by_node(rd->dn->parent);
+		if (chip == NULL)
+			return NOTIFY_OK;	/* not for us */
+
+		of_gpiochip_remove_hog(chip, rd->dn);
+		of_node_clear_flag(rd->dn, OF_POPULATED);
+		break;
+	}
+
+	return NOTIFY_OK;
+}
+
+struct notifier_block gpio_of_notifier = {
+	.notifier_call = of_gpio_notify,
+};
+#endif /* CONFIG_OF_DYNAMIC */
+
 /**
  * of_gpio_simple_xlate - translate gpiospec to the GPIO number and flags
  * @gc:		pointer to the gpio_chip structure
diff --git a/drivers/gpio/gpiolib-of.h b/drivers/gpio/gpiolib-of.h
index 9768831..ed26664 100644
--- a/drivers/gpio/gpiolib-of.h
+++ b/drivers/gpio/gpiolib-of.h
@@ -35,4 +35,6 @@ static inline bool of_gpio_need_valid_mask(const struct gpio_chip *gc)
 }
 #endif /* CONFIG_OF_GPIO */
 
+extern struct notifier_block gpio_of_notifier;
+
 #endif /* GPIOLIB_OF_H */
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 00fb91f..40f2d7f 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -81,14 +81,14 @@ LIST_HEAD(gpio_devices);
 static DEFINE_MUTEX(gpio_machine_hogs_mutex);
 static LIST_HEAD(gpio_machine_hogs);
 
-static void gpiochip_free_hogs(struct gpio_chip *chip);
-static int gpiochip_add_irqchip(struct gpio_chip *gpiochip,
+static void gpiochip_free_hogs(struct gpio_chip *gc);
+static int gpiochip_add_irqchip(struct gpio_chip *gc,
 				struct lock_class_key *lock_key,
 				struct lock_class_key *request_key);
-static void gpiochip_irqchip_remove(struct gpio_chip *gpiochip);
-static int gpiochip_irqchip_init_hw(struct gpio_chip *gpiochip);
-static int gpiochip_irqchip_init_valid_mask(struct gpio_chip *gpiochip);
-static void gpiochip_irqchip_free_valid_mask(struct gpio_chip *gpiochip);
+static void gpiochip_irqchip_remove(struct gpio_chip *gc);
+static int gpiochip_irqchip_init_hw(struct gpio_chip *gc);
+static int gpiochip_irqchip_init_valid_mask(struct gpio_chip *gc);
+static void gpiochip_irqchip_free_valid_mask(struct gpio_chip *gc);
 
 static bool gpiolib_initialized;
 
@@ -132,23 +132,24 @@ EXPORT_SYMBOL_GPL(gpio_to_desc);
 /**
  * gpiochip_get_desc - get the GPIO descriptor corresponding to the given
  *                     hardware number for this chip
- * @chip: GPIO chip
+ * @gc: GPIO chip
  * @hwnum: hardware number of the GPIO for this chip
  *
  * Returns:
- * A pointer to the GPIO descriptor or %ERR_PTR(-EINVAL) if no GPIO exists
+ * A pointer to the GPIO descriptor or ``ERR_PTR(-EINVAL)`` if no GPIO exists
  * in the given chip for the specified hardware number.
  */
-struct gpio_desc *gpiochip_get_desc(struct gpio_chip *chip,
+struct gpio_desc *gpiochip_get_desc(struct gpio_chip *gc,
 				    unsigned int hwnum)
 {
-	struct gpio_device *gdev = chip->gpiodev;
+	struct gpio_device *gdev = gc->gpiodev;
 
 	if (hwnum >= gdev->ngpio)
 		return ERR_PTR(-EINVAL);
 
 	return &gdev->descs[hwnum];
 }
+EXPORT_SYMBOL_GPL(gpiochip_get_desc);
 
 /**
  * desc_to_gpio - convert a GPIO descriptor to the integer namespace
@@ -213,11 +214,11 @@ static int gpiochip_find_base(int ngpio)
  */
 int gpiod_get_direction(struct gpio_desc *desc)
 {
-	struct gpio_chip *chip;
+	struct gpio_chip *gc;
 	unsigned offset;
 	int ret;
 
-	chip = gpiod_to_chip(desc);
+	gc = gpiod_to_chip(desc);
 	offset = gpio_chip_hwgpio(desc);
 
 	/*
@@ -228,10 +229,10 @@ int gpiod_get_direction(struct gpio_desc *desc)
 	    test_bit(FLAG_IS_OUT, &desc->flags))
 		return 0;
 
-	if (!chip->get_direction)
+	if (!gc->get_direction)
 		return -ENOTSUPP;
 
-	ret = chip->get_direction(chip, offset);
+	ret = gc->get_direction(gc, offset);
 	if (ret < 0)
 		return ret;
 
@@ -301,6 +302,9 @@ static struct gpio_desc *gpio_name_to_desc(const char * const name)
 	struct gpio_device *gdev;
 	unsigned long flags;
 
+	if (!name)
+		return NULL;
+
 	spin_lock_irqsave(&gpio_lock, flags);
 
 	list_for_each_entry(gdev, &gpio_devices, list) {
@@ -309,7 +313,7 @@ static struct gpio_desc *gpio_name_to_desc(const char * const name)
 		for (i = 0; i != gdev->ngpio; ++i) {
 			struct gpio_desc *desc = &gdev->descs[i];
 
-			if (!desc->name || !name)
+			if (!desc->name)
 				continue;
 
 			if (!strcmp(desc->name, name)) {
@@ -356,16 +360,16 @@ static int gpiochip_set_desc_names(struct gpio_chip *gc)
 	return 0;
 }
 
-static unsigned long *gpiochip_allocate_mask(struct gpio_chip *chip)
+static unsigned long *gpiochip_allocate_mask(struct gpio_chip *gc)
 {
 	unsigned long *p;
 
-	p = bitmap_alloc(chip->ngpio, GFP_KERNEL);
+	p = bitmap_alloc(gc->ngpio, GFP_KERNEL);
 	if (!p)
 		return NULL;
 
 	/* Assume by default all GPIOs are valid */
-	bitmap_fill(p, chip->ngpio);
+	bitmap_fill(p, gc->ngpio);
 
 	return p;
 }
@@ -392,10 +396,10 @@ static int gpiochip_init_valid_mask(struct gpio_chip *gc)
 	return 0;
 }
 
-static void gpiochip_free_valid_mask(struct gpio_chip *gpiochip)
+static void gpiochip_free_valid_mask(struct gpio_chip *gc)
 {
-	bitmap_free(gpiochip->valid_mask);
-	gpiochip->valid_mask = NULL;
+	bitmap_free(gc->valid_mask);
+	gc->valid_mask = NULL;
 }
 
 static int gpiochip_add_pin_ranges(struct gpio_chip *gc)
@@ -406,13 +410,13 @@ static int gpiochip_add_pin_ranges(struct gpio_chip *gc)
 	return 0;
 }
 
-bool gpiochip_line_is_valid(const struct gpio_chip *gpiochip,
+bool gpiochip_line_is_valid(const struct gpio_chip *gc,
 				unsigned int offset)
 {
 	/* No mask means all valid */
-	if (likely(!gpiochip->valid_mask))
+	if (likely(!gc->valid_mask))
 		return true;
-	return test_bit(offset, gpiochip->valid_mask);
+	return test_bit(offset, gc->valid_mask);
 }
 EXPORT_SYMBOL_GPL(gpiochip_line_is_valid);
 
@@ -546,6 +550,9 @@ static long linehandle_set_config(struct linehandle_state *lh,
 			if (ret)
 				return ret;
 		}
+
+		atomic_notifier_call_chain(&desc->gdev->notifier,
+					   GPIOLINE_CHANGED_CONFIG, desc);
 	}
 	return 0;
 }
@@ -787,8 +794,6 @@ static int linehandle_create(struct gpio_device *gdev, void __user *ip)
  * @irq: the interrupt that trigger in response to events on this GPIO
  * @wait: wait queue that handles blocking reads of events
  * @events: KFIFO for the GPIO events
- * @read_lock: mutex lock to protect reads from colliding with adding
- * new events to the FIFO
  * @timestamp: cache for the timestamp storing it between hardirq
  * and IRQ thread, used to bring the timestamp close to the actual
  * event
@@ -801,7 +806,6 @@ struct lineevent_state {
 	int irq;
 	wait_queue_head_t wait;
 	DECLARE_KFIFO(events, struct gpioevent_data, 16);
-	struct mutex read_lock;
 	u64 timestamp;
 };
 
@@ -817,7 +821,7 @@ static __poll_t lineevent_poll(struct file *filep,
 
 	poll_wait(filep, &le->wait, wait);
 
-	if (!kfifo_is_empty(&le->events))
+	if (!kfifo_is_empty_spinlocked_noirqsave(&le->events, &le->wait.lock))
 		events = EPOLLIN | EPOLLRDNORM;
 
 	return events;
@@ -830,43 +834,52 @@ static ssize_t lineevent_read(struct file *filep,
 			      loff_t *f_ps)
 {
 	struct lineevent_state *le = filep->private_data;
-	unsigned int copied;
+	struct gpioevent_data ge;
+	ssize_t bytes_read = 0;
 	int ret;
 
-	if (count < sizeof(struct gpioevent_data))
+	if (count < sizeof(ge))
 		return -EINVAL;
 
 	do {
+		spin_lock(&le->wait.lock);
 		if (kfifo_is_empty(&le->events)) {
-			if (filep->f_flags & O_NONBLOCK)
-				return -EAGAIN;
+			if (bytes_read) {
+				spin_unlock(&le->wait.lock);
+				return bytes_read;
+			}
 
-			ret = wait_event_interruptible(le->wait,
+			if (filep->f_flags & O_NONBLOCK) {
+				spin_unlock(&le->wait.lock);
+				return -EAGAIN;
+			}
+
+			ret = wait_event_interruptible_locked(le->wait,
 					!kfifo_is_empty(&le->events));
-			if (ret)
+			if (ret) {
+				spin_unlock(&le->wait.lock);
 				return ret;
+			}
 		}
 
-		if (mutex_lock_interruptible(&le->read_lock))
-			return -ERESTARTSYS;
-		ret = kfifo_to_user(&le->events, buf, count, &copied);
-		mutex_unlock(&le->read_lock);
+		ret = kfifo_out(&le->events, &ge, 1);
+		spin_unlock(&le->wait.lock);
+		if (ret != 1) {
+			/*
+			 * This should never happen - we were holding the lock
+			 * from the moment we learned the fifo is no longer
+			 * empty until now.
+			 */
+			ret = -EIO;
+			break;
+		}
 
-		if (ret)
-			return ret;
+		if (copy_to_user(buf + bytes_read, &ge, sizeof(ge)))
+			return -EFAULT;
+		bytes_read += sizeof(ge);
+	} while (count >= bytes_read + sizeof(ge));
 
-		/*
-		 * If we couldn't read anything from the fifo (a different
-		 * thread might have been faster) we either return -EAGAIN if
-		 * the file descriptor is non-blocking, otherwise we go back to
-		 * sleep and wait for more data to arrive.
-		 */
-		if (copied == 0 && (filep->f_flags & O_NONBLOCK))
-			return -EAGAIN;
-
-	} while (copied == 0);
-
-	return copied;
+	return bytes_read;
 }
 
 static int lineevent_release(struct inode *inode, struct file *filep)
@@ -945,7 +958,7 @@ static irqreturn_t lineevent_irq_thread(int irq, void *p)
 	 * we didn't get the timestamp from lineevent_irq_handler().
 	 */
 	if (!le->timestamp)
-		ge.timestamp = ktime_get_real_ns();
+		ge.timestamp = ktime_get_ns();
 	else
 		ge.timestamp = le->timestamp;
 
@@ -968,9 +981,12 @@ static irqreturn_t lineevent_irq_thread(int irq, void *p)
 		return IRQ_NONE;
 	}
 
-	ret = kfifo_put(&le->events, ge);
+	ret = kfifo_in_spinlocked_noirqsave(&le->events, &ge,
+					    1, &le->wait.lock);
 	if (ret)
 		wake_up_poll(&le->wait, EPOLLIN);
+	else
+		pr_debug_ratelimited("event FIFO is full - event dropped\n");
 
 	return IRQ_HANDLED;
 }
@@ -983,7 +999,7 @@ static irqreturn_t lineevent_irq_handler(int irq, void *p)
 	 * Just store the timestamp in hardirq context so we get it as
 	 * close in time as possible to the actual event.
 	 */
-	le->timestamp = ktime_get_real_ns();
+	le->timestamp = ktime_get_ns();
 
 	return IRQ_WAKE_THREAD;
 }
@@ -1083,7 +1099,6 @@ static int lineevent_create(struct gpio_device *gdev, void __user *ip)
 
 	INIT_KFIFO(le->events);
 	init_waitqueue_head(&le->wait);
-	mutex_init(&le->read_lock);
 
 	/* Request a thread to read the events */
 	ret = request_threaded_irq(le->irq,
@@ -1139,17 +1154,82 @@ static int lineevent_create(struct gpio_device *gdev, void __user *ip)
 	return ret;
 }
 
+static void gpio_desc_to_lineinfo(struct gpio_desc *desc,
+				  struct gpioline_info *info)
+{
+	struct gpio_chip *gc = desc->gdev->chip;
+	unsigned long flags;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	if (desc->name) {
+		strncpy(info->name, desc->name, sizeof(info->name));
+		info->name[sizeof(info->name) - 1] = '\0';
+	} else {
+		info->name[0] = '\0';
+	}
+
+	if (desc->label) {
+		strncpy(info->consumer, desc->label, sizeof(info->consumer));
+		info->consumer[sizeof(info->consumer) - 1] = '\0';
+	} else {
+		info->consumer[0] = '\0';
+	}
+
+	/*
+	 * Userspace only need to know that the kernel is using this GPIO so
+	 * it can't use it.
+	 */
+	info->flags = 0;
+	if (test_bit(FLAG_REQUESTED, &desc->flags) ||
+	    test_bit(FLAG_IS_HOGGED, &desc->flags) ||
+	    test_bit(FLAG_USED_AS_IRQ, &desc->flags) ||
+	    test_bit(FLAG_EXPORT, &desc->flags) ||
+	    test_bit(FLAG_SYSFS, &desc->flags) ||
+	    !pinctrl_gpio_can_use_line(gc->base + info->line_offset))
+		info->flags |= GPIOLINE_FLAG_KERNEL;
+	if (test_bit(FLAG_IS_OUT, &desc->flags))
+		info->flags |= GPIOLINE_FLAG_IS_OUT;
+	if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
+		info->flags |= GPIOLINE_FLAG_ACTIVE_LOW;
+	if (test_bit(FLAG_OPEN_DRAIN, &desc->flags))
+		info->flags |= (GPIOLINE_FLAG_OPEN_DRAIN |
+				GPIOLINE_FLAG_IS_OUT);
+	if (test_bit(FLAG_OPEN_SOURCE, &desc->flags))
+		info->flags |= (GPIOLINE_FLAG_OPEN_SOURCE |
+				GPIOLINE_FLAG_IS_OUT);
+	if (test_bit(FLAG_BIAS_DISABLE, &desc->flags))
+		info->flags |= GPIOLINE_FLAG_BIAS_DISABLE;
+	if (test_bit(FLAG_PULL_DOWN, &desc->flags))
+		info->flags |= GPIOLINE_FLAG_BIAS_PULL_DOWN;
+	if (test_bit(FLAG_PULL_UP, &desc->flags))
+		info->flags |= GPIOLINE_FLAG_BIAS_PULL_UP;
+
+	spin_unlock_irqrestore(&gpio_lock, flags);
+}
+
+struct gpio_chardev_data {
+	struct gpio_device *gdev;
+	wait_queue_head_t wait;
+	DECLARE_KFIFO(events, struct gpioline_info_changed, 32);
+	struct notifier_block lineinfo_changed_nb;
+	unsigned long *watched_lines;
+};
+
 /*
  * gpio_ioctl() - ioctl handler for the GPIO chardev
  */
 static long gpio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 {
-	struct gpio_device *gdev = filp->private_data;
-	struct gpio_chip *chip = gdev->chip;
+	struct gpio_chardev_data *priv = filp->private_data;
+	struct gpio_device *gdev = priv->gdev;
+	struct gpio_chip *gc = gdev->chip;
 	void __user *ip = (void __user *)arg;
+	struct gpio_desc *desc;
+	__u32 offset;
 
 	/* We fail any subsequent ioctl():s when the chip is gone */
-	if (!chip)
+	if (!gc)
 		return -ENODEV;
 
 	/* Fill in the struct and pass to userspace */
@@ -1168,68 +1248,40 @@ static long gpio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 		if (copy_to_user(ip, &chipinfo, sizeof(chipinfo)))
 			return -EFAULT;
 		return 0;
-	} else if (cmd == GPIO_GET_LINEINFO_IOCTL) {
+	} else if (cmd == GPIO_GET_LINEINFO_IOCTL ||
+		   cmd == GPIO_GET_LINEINFO_WATCH_IOCTL) {
 		struct gpioline_info lineinfo;
-		struct gpio_desc *desc;
 
 		if (copy_from_user(&lineinfo, ip, sizeof(lineinfo)))
 			return -EFAULT;
 
-		desc = gpiochip_get_desc(chip, lineinfo.line_offset);
+		desc = gpiochip_get_desc(gc, lineinfo.line_offset);
 		if (IS_ERR(desc))
 			return PTR_ERR(desc);
 
-		if (desc->name) {
-			strncpy(lineinfo.name, desc->name,
-				sizeof(lineinfo.name));
-			lineinfo.name[sizeof(lineinfo.name)-1] = '\0';
-		} else {
-			lineinfo.name[0] = '\0';
-		}
-		if (desc->label) {
-			strncpy(lineinfo.consumer, desc->label,
-				sizeof(lineinfo.consumer));
-			lineinfo.consumer[sizeof(lineinfo.consumer)-1] = '\0';
-		} else {
-			lineinfo.consumer[0] = '\0';
-		}
-
-		/*
-		 * Userspace only need to know that the kernel is using
-		 * this GPIO so it can't use it.
-		 */
-		lineinfo.flags = 0;
-		if (test_bit(FLAG_REQUESTED, &desc->flags) ||
-		    test_bit(FLAG_IS_HOGGED, &desc->flags) ||
-		    test_bit(FLAG_USED_AS_IRQ, &desc->flags) ||
-		    test_bit(FLAG_EXPORT, &desc->flags) ||
-		    test_bit(FLAG_SYSFS, &desc->flags) ||
-		    !pinctrl_gpio_can_use_line(chip->base + lineinfo.line_offset))
-			lineinfo.flags |= GPIOLINE_FLAG_KERNEL;
-		if (test_bit(FLAG_IS_OUT, &desc->flags))
-			lineinfo.flags |= GPIOLINE_FLAG_IS_OUT;
-		if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
-			lineinfo.flags |= GPIOLINE_FLAG_ACTIVE_LOW;
-		if (test_bit(FLAG_OPEN_DRAIN, &desc->flags))
-			lineinfo.flags |= (GPIOLINE_FLAG_OPEN_DRAIN |
-					   GPIOLINE_FLAG_IS_OUT);
-		if (test_bit(FLAG_OPEN_SOURCE, &desc->flags))
-			lineinfo.flags |= (GPIOLINE_FLAG_OPEN_SOURCE |
-					   GPIOLINE_FLAG_IS_OUT);
-		if (test_bit(FLAG_BIAS_DISABLE, &desc->flags))
-			lineinfo.flags |= GPIOLINE_FLAG_BIAS_DISABLE;
-		if (test_bit(FLAG_PULL_DOWN, &desc->flags))
-			lineinfo.flags |= GPIOLINE_FLAG_BIAS_PULL_DOWN;
-		if (test_bit(FLAG_PULL_UP, &desc->flags))
-			lineinfo.flags |= GPIOLINE_FLAG_BIAS_PULL_UP;
+		gpio_desc_to_lineinfo(desc, &lineinfo);
 
 		if (copy_to_user(ip, &lineinfo, sizeof(lineinfo)))
 			return -EFAULT;
+
+		if (cmd == GPIO_GET_LINEINFO_WATCH_IOCTL)
+			set_bit(gpio_chip_hwgpio(desc), priv->watched_lines);
+
 		return 0;
 	} else if (cmd == GPIO_GET_LINEHANDLE_IOCTL) {
 		return linehandle_create(gdev, ip);
 	} else if (cmd == GPIO_GET_LINEEVENT_IOCTL) {
 		return lineevent_create(gdev, ip);
+	} else if (cmd == GPIO_GET_LINEINFO_UNWATCH_IOCTL) {
+		if (copy_from_user(&offset, ip, sizeof(offset)))
+			return -EFAULT;
+
+		desc = gpiochip_get_desc(gc, offset);
+		if (IS_ERR(desc))
+			return PTR_ERR(desc);
+
+		clear_bit(gpio_chip_hwgpio(desc), priv->watched_lines);
+		return 0;
 	}
 	return -EINVAL;
 }
@@ -1242,6 +1294,101 @@ static long gpio_ioctl_compat(struct file *filp, unsigned int cmd,
 }
 #endif
 
+static struct gpio_chardev_data *
+to_gpio_chardev_data(struct notifier_block *nb)
+{
+	return container_of(nb, struct gpio_chardev_data, lineinfo_changed_nb);
+}
+
+static int lineinfo_changed_notify(struct notifier_block *nb,
+				   unsigned long action, void *data)
+{
+	struct gpio_chardev_data *priv = to_gpio_chardev_data(nb);
+	struct gpioline_info_changed chg;
+	struct gpio_desc *desc = data;
+	int ret;
+
+	if (!test_bit(gpio_chip_hwgpio(desc), priv->watched_lines))
+		return NOTIFY_DONE;
+
+	memset(&chg, 0, sizeof(chg));
+	chg.info.line_offset = gpio_chip_hwgpio(desc);
+	chg.event_type = action;
+	chg.timestamp = ktime_get_ns();
+	gpio_desc_to_lineinfo(desc, &chg.info);
+
+	ret = kfifo_in_spinlocked(&priv->events, &chg, 1, &priv->wait.lock);
+	if (ret)
+		wake_up_poll(&priv->wait, EPOLLIN);
+	else
+		pr_debug_ratelimited("lineinfo event FIFO is full - event dropped\n");
+
+	return NOTIFY_OK;
+}
+
+static __poll_t lineinfo_watch_poll(struct file *filep,
+				    struct poll_table_struct *pollt)
+{
+	struct gpio_chardev_data *priv = filep->private_data;
+	__poll_t events = 0;
+
+	poll_wait(filep, &priv->wait, pollt);
+
+	if (!kfifo_is_empty_spinlocked_noirqsave(&priv->events,
+						 &priv->wait.lock))
+		events = EPOLLIN | EPOLLRDNORM;
+
+	return events;
+}
+
+static ssize_t lineinfo_watch_read(struct file *filep, char __user *buf,
+				   size_t count, loff_t *off)
+{
+	struct gpio_chardev_data *priv = filep->private_data;
+	struct gpioline_info_changed event;
+	ssize_t bytes_read = 0;
+	int ret;
+
+	if (count < sizeof(event))
+		return -EINVAL;
+
+	do {
+		spin_lock(&priv->wait.lock);
+		if (kfifo_is_empty(&priv->events)) {
+			if (bytes_read) {
+				spin_unlock(&priv->wait.lock);
+				return bytes_read;
+			}
+
+			if (filep->f_flags & O_NONBLOCK) {
+				spin_unlock(&priv->wait.lock);
+				return -EAGAIN;
+			}
+
+			ret = wait_event_interruptible_locked(priv->wait,
+					!kfifo_is_empty(&priv->events));
+			if (ret) {
+				spin_unlock(&priv->wait.lock);
+				return ret;
+			}
+		}
+
+		ret = kfifo_out(&priv->events, &event, 1);
+		spin_unlock(&priv->wait.lock);
+		if (ret != 1) {
+			ret = -EIO;
+			break;
+			/* We should never get here. See lineevent_read(). */
+		}
+
+		if (copy_to_user(buf + bytes_read, &event, sizeof(event)))
+			return -EFAULT;
+		bytes_read += sizeof(event);
+	} while (count >= bytes_read + sizeof(event));
+
+	return bytes_read;
+}
+
 /**
  * gpio_chrdev_open() - open the chardev for ioctl operations
  * @inode: inode for this chardev
@@ -1252,14 +1399,48 @@ static int gpio_chrdev_open(struct inode *inode, struct file *filp)
 {
 	struct gpio_device *gdev = container_of(inode->i_cdev,
 					      struct gpio_device, chrdev);
+	struct gpio_chardev_data *priv;
+	int ret = -ENOMEM;
 
 	/* Fail on open if the backing gpiochip is gone */
 	if (!gdev->chip)
 		return -ENODEV;
-	get_device(&gdev->dev);
-	filp->private_data = gdev;
 
-	return nonseekable_open(inode, filp);
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->watched_lines = bitmap_zalloc(gdev->chip->ngpio, GFP_KERNEL);
+	if (!priv->watched_lines)
+		goto out_free_priv;
+
+	init_waitqueue_head(&priv->wait);
+	INIT_KFIFO(priv->events);
+	priv->gdev = gdev;
+
+	priv->lineinfo_changed_nb.notifier_call = lineinfo_changed_notify;
+	ret = atomic_notifier_chain_register(&gdev->notifier,
+					     &priv->lineinfo_changed_nb);
+	if (ret)
+		goto out_free_bitmap;
+
+	get_device(&gdev->dev);
+	filp->private_data = priv;
+
+	ret = nonseekable_open(inode, filp);
+	if (ret)
+		goto out_unregister_notifier;
+
+	return ret;
+
+out_unregister_notifier:
+	atomic_notifier_chain_unregister(&gdev->notifier,
+					 &priv->lineinfo_changed_nb);
+out_free_bitmap:
+	bitmap_free(priv->watched_lines);
+out_free_priv:
+	kfree(priv);
+	return ret;
 }
 
 /**
@@ -1270,17 +1451,23 @@ static int gpio_chrdev_open(struct inode *inode, struct file *filp)
  */
 static int gpio_chrdev_release(struct inode *inode, struct file *filp)
 {
-	struct gpio_device *gdev = container_of(inode->i_cdev,
-					      struct gpio_device, chrdev);
+	struct gpio_chardev_data *priv = filp->private_data;
+	struct gpio_device *gdev = priv->gdev;
 
+	bitmap_free(priv->watched_lines);
+	atomic_notifier_chain_unregister(&gdev->notifier,
+					 &priv->lineinfo_changed_nb);
 	put_device(&gdev->dev);
+	kfree(priv);
+
 	return 0;
 }
 
-
 static const struct file_operations gpio_fileops = {
 	.release = gpio_chrdev_release,
 	.open = gpio_chrdev_open,
+	.poll = lineinfo_watch_poll,
+	.read = lineinfo_watch_read,
 	.owner = THIS_MODULE,
 	.llseek = no_llseek,
 	.unlocked_ioctl = gpio_ioctl,
@@ -1332,12 +1519,12 @@ static int gpiochip_setup_dev(struct gpio_device *gdev)
 	return ret;
 }
 
-static void gpiochip_machine_hog(struct gpio_chip *chip, struct gpiod_hog *hog)
+static void gpiochip_machine_hog(struct gpio_chip *gc, struct gpiod_hog *hog)
 {
 	struct gpio_desc *desc;
 	int rv;
 
-	desc = gpiochip_get_desc(chip, hog->chip_hwnum);
+	desc = gpiochip_get_desc(gc, hog->chip_hwnum);
 	if (IS_ERR(desc)) {
 		pr_err("%s: unable to get GPIO desc: %ld\n",
 		       __func__, PTR_ERR(desc));
@@ -1350,18 +1537,18 @@ static void gpiochip_machine_hog(struct gpio_chip *chip, struct gpiod_hog *hog)
 	rv = gpiod_hog(desc, hog->line_name, hog->lflags, hog->dflags);
 	if (rv)
 		pr_err("%s: unable to hog GPIO line (%s:%u): %d\n",
-		       __func__, chip->label, hog->chip_hwnum, rv);
+		       __func__, gc->label, hog->chip_hwnum, rv);
 }
 
-static void machine_gpiochip_add(struct gpio_chip *chip)
+static void machine_gpiochip_add(struct gpio_chip *gc)
 {
 	struct gpiod_hog *hog;
 
 	mutex_lock(&gpio_machine_hogs_mutex);
 
 	list_for_each_entry(hog, &gpio_machine_hogs, list) {
-		if (!strcmp(chip->label, hog->chip_label))
-			gpiochip_machine_hog(chip, hog);
+		if (!strcmp(gc->label, hog->chip_label))
+			gpiochip_machine_hog(gc, hog);
 	}
 
 	mutex_unlock(&gpio_machine_hogs_mutex);
@@ -1380,14 +1567,14 @@ static void gpiochip_setup_devs(void)
 	}
 }
 
-int gpiochip_add_data_with_key(struct gpio_chip *chip, void *data,
+int gpiochip_add_data_with_key(struct gpio_chip *gc, void *data,
 			       struct lock_class_key *lock_key,
 			       struct lock_class_key *request_key)
 {
 	unsigned long	flags;
 	int		ret = 0;
 	unsigned	i;
-	int		base = chip->base;
+	int		base = gc->base;
 	struct gpio_device *gdev;
 
 	/*
@@ -1398,19 +1585,19 @@ int gpiochip_add_data_with_key(struct gpio_chip *chip, void *data,
 	if (!gdev)
 		return -ENOMEM;
 	gdev->dev.bus = &gpio_bus_type;
-	gdev->chip = chip;
-	chip->gpiodev = gdev;
-	if (chip->parent) {
-		gdev->dev.parent = chip->parent;
-		gdev->dev.of_node = chip->parent->of_node;
+	gdev->chip = gc;
+	gc->gpiodev = gdev;
+	if (gc->parent) {
+		gdev->dev.parent = gc->parent;
+		gdev->dev.of_node = gc->parent->of_node;
 	}
 
 #ifdef CONFIG_OF_GPIO
 	/* If the gpiochip has an assigned OF node this takes precedence */
-	if (chip->of_node)
-		gdev->dev.of_node = chip->of_node;
+	if (gc->of_node)
+		gdev->dev.of_node = gc->of_node;
 	else
-		chip->of_node = gdev->dev.of_node;
+		gc->of_node = gdev->dev.of_node;
 #endif
 
 	gdev->id = ida_simple_get(&gpio_ida, 0, 0, GFP_KERNEL);
@@ -1421,37 +1608,37 @@ int gpiochip_add_data_with_key(struct gpio_chip *chip, void *data,
 	dev_set_name(&gdev->dev, GPIOCHIP_NAME "%d", gdev->id);
 	device_initialize(&gdev->dev);
 	dev_set_drvdata(&gdev->dev, gdev);
-	if (chip->parent && chip->parent->driver)
-		gdev->owner = chip->parent->driver->owner;
-	else if (chip->owner)
+	if (gc->parent && gc->parent->driver)
+		gdev->owner = gc->parent->driver->owner;
+	else if (gc->owner)
 		/* TODO: remove chip->owner */
-		gdev->owner = chip->owner;
+		gdev->owner = gc->owner;
 	else
 		gdev->owner = THIS_MODULE;
 
-	gdev->descs = kcalloc(chip->ngpio, sizeof(gdev->descs[0]), GFP_KERNEL);
+	gdev->descs = kcalloc(gc->ngpio, sizeof(gdev->descs[0]), GFP_KERNEL);
 	if (!gdev->descs) {
 		ret = -ENOMEM;
 		goto err_free_ida;
 	}
 
-	if (chip->ngpio == 0) {
-		chip_err(chip, "tried to insert a GPIO chip with zero lines\n");
+	if (gc->ngpio == 0) {
+		chip_err(gc, "tried to insert a GPIO chip with zero lines\n");
 		ret = -EINVAL;
 		goto err_free_descs;
 	}
 
-	if (chip->ngpio > FASTPATH_NGPIO)
-		chip_warn(chip, "line cnt %u is greater than fast path cnt %u\n",
-			  chip->ngpio, FASTPATH_NGPIO);
+	if (gc->ngpio > FASTPATH_NGPIO)
+		chip_warn(gc, "line cnt %u is greater than fast path cnt %u\n",
+			  gc->ngpio, FASTPATH_NGPIO);
 
-	gdev->label = kstrdup_const(chip->label ?: "unknown", GFP_KERNEL);
+	gdev->label = kstrdup_const(gc->label ?: "unknown", GFP_KERNEL);
 	if (!gdev->label) {
 		ret = -ENOMEM;
 		goto err_free_descs;
 	}
 
-	gdev->ngpio = chip->ngpio;
+	gdev->ngpio = gc->ngpio;
 	gdev->data = data;
 
 	spin_lock_irqsave(&gpio_lock, flags);
@@ -1464,7 +1651,7 @@ int gpiochip_add_data_with_key(struct gpio_chip *chip, void *data,
 	 * of the sysfs interface anyways.
 	 */
 	if (base < 0) {
-		base = gpiochip_find_base(chip->ngpio);
+		base = gpiochip_find_base(gc->ngpio);
 		if (base < 0) {
 			ret = base;
 			spin_unlock_irqrestore(&gpio_lock, flags);
@@ -1476,7 +1663,7 @@ int gpiochip_add_data_with_key(struct gpio_chip *chip, void *data,
 		 * see if anyone makes use of this, else drop this and assign
 		 * a poison instead.
 		 */
-		chip->base = base;
+		gc->base = base;
 	}
 	gdev->base = base;
 
@@ -1486,60 +1673,62 @@ int gpiochip_add_data_with_key(struct gpio_chip *chip, void *data,
 		goto err_free_label;
 	}
 
-	for (i = 0; i < chip->ngpio; i++)
+	for (i = 0; i < gc->ngpio; i++)
 		gdev->descs[i].gdev = gdev;
 
 	spin_unlock_irqrestore(&gpio_lock, flags);
 
+	ATOMIC_INIT_NOTIFIER_HEAD(&gdev->notifier);
+
 #ifdef CONFIG_PINCTRL
 	INIT_LIST_HEAD(&gdev->pin_ranges);
 #endif
 
-	ret = gpiochip_set_desc_names(chip);
+	ret = gpiochip_set_desc_names(gc);
 	if (ret)
 		goto err_remove_from_list;
 
-	ret = gpiochip_alloc_valid_mask(chip);
+	ret = gpiochip_alloc_valid_mask(gc);
 	if (ret)
 		goto err_remove_from_list;
 
-	ret = of_gpiochip_add(chip);
+	ret = of_gpiochip_add(gc);
 	if (ret)
 		goto err_free_gpiochip_mask;
 
-	ret = gpiochip_init_valid_mask(chip);
+	ret = gpiochip_init_valid_mask(gc);
 	if (ret)
 		goto err_remove_of_chip;
 
-	for (i = 0; i < chip->ngpio; i++) {
+	for (i = 0; i < gc->ngpio; i++) {
 		struct gpio_desc *desc = &gdev->descs[i];
 
-		if (chip->get_direction && gpiochip_line_is_valid(chip, i)) {
+		if (gc->get_direction && gpiochip_line_is_valid(gc, i)) {
 			assign_bit(FLAG_IS_OUT,
-				   &desc->flags, !chip->get_direction(chip, i));
+				   &desc->flags, !gc->get_direction(gc, i));
 		} else {
 			assign_bit(FLAG_IS_OUT,
-				   &desc->flags, !chip->direction_input);
+				   &desc->flags, !gc->direction_input);
 		}
 	}
 
-	ret = gpiochip_add_pin_ranges(chip);
+	ret = gpiochip_add_pin_ranges(gc);
 	if (ret)
 		goto err_remove_of_chip;
 
-	acpi_gpiochip_add(chip);
+	acpi_gpiochip_add(gc);
 
-	machine_gpiochip_add(chip);
+	machine_gpiochip_add(gc);
 
-	ret = gpiochip_irqchip_init_valid_mask(chip);
+	ret = gpiochip_irqchip_init_valid_mask(gc);
 	if (ret)
 		goto err_remove_acpi_chip;
 
-	ret = gpiochip_irqchip_init_hw(chip);
+	ret = gpiochip_irqchip_init_hw(gc);
 	if (ret)
 		goto err_remove_acpi_chip;
 
-	ret = gpiochip_add_irqchip(chip, lock_key, request_key);
+	ret = gpiochip_add_irqchip(gc, lock_key, request_key);
 	if (ret)
 		goto err_remove_irqchip_mask;
 
@@ -1559,17 +1748,17 @@ int gpiochip_add_data_with_key(struct gpio_chip *chip, void *data,
 	return 0;
 
 err_remove_irqchip:
-	gpiochip_irqchip_remove(chip);
+	gpiochip_irqchip_remove(gc);
 err_remove_irqchip_mask:
-	gpiochip_irqchip_free_valid_mask(chip);
+	gpiochip_irqchip_free_valid_mask(gc);
 err_remove_acpi_chip:
-	acpi_gpiochip_remove(chip);
+	acpi_gpiochip_remove(gc);
 err_remove_of_chip:
-	gpiochip_free_hogs(chip);
-	of_gpiochip_remove(chip);
+	gpiochip_free_hogs(gc);
+	of_gpiochip_remove(gc);
 err_free_gpiochip_mask:
-	gpiochip_remove_pin_ranges(chip);
-	gpiochip_free_valid_mask(chip);
+	gpiochip_remove_pin_ranges(gc);
+	gpiochip_free_valid_mask(gc);
 err_remove_from_list:
 	spin_lock_irqsave(&gpio_lock, flags);
 	list_del(&gdev->list);
@@ -1584,7 +1773,7 @@ int gpiochip_add_data_with_key(struct gpio_chip *chip, void *data,
 	/* failures here can mean systems won't boot... */
 	pr_err("%s: GPIOs %d..%d (%s) failed to register, %d\n", __func__,
 	       gdev->base, gdev->base + gdev->ngpio - 1,
-	       chip->label ? : "generic", ret);
+	       gc->label ? : "generic", ret);
 	kfree(gdev);
 	return ret;
 }
@@ -1592,41 +1781,39 @@ EXPORT_SYMBOL_GPL(gpiochip_add_data_with_key);
 
 /**
  * gpiochip_get_data() - get per-subdriver data for the chip
- * @chip: GPIO chip
+ * @gc: GPIO chip
  *
  * Returns:
  * The per-subdriver data for the chip.
  */
-void *gpiochip_get_data(struct gpio_chip *chip)
+void *gpiochip_get_data(struct gpio_chip *gc)
 {
-	return chip->gpiodev->data;
+	return gc->gpiodev->data;
 }
 EXPORT_SYMBOL_GPL(gpiochip_get_data);
 
 /**
  * gpiochip_remove() - unregister a gpio_chip
- * @chip: the chip to unregister
+ * @gc: the chip to unregister
  *
  * A gpio_chip with any GPIOs still requested may not be removed.
  */
-void gpiochip_remove(struct gpio_chip *chip)
+void gpiochip_remove(struct gpio_chip *gc)
 {
-	struct gpio_device *gdev = chip->gpiodev;
-	struct gpio_desc *desc;
+	struct gpio_device *gdev = gc->gpiodev;
 	unsigned long	flags;
-	unsigned	i;
-	bool		requested = false;
+	unsigned int	i;
 
 	/* FIXME: should the legacy sysfs handling be moved to gpio_device? */
 	gpiochip_sysfs_unregister(gdev);
-	gpiochip_free_hogs(chip);
+	gpiochip_free_hogs(gc);
 	/* Numb the device, cancelling all outstanding operations */
 	gdev->chip = NULL;
-	gpiochip_irqchip_remove(chip);
-	acpi_gpiochip_remove(chip);
-	of_gpiochip_remove(chip);
-	gpiochip_remove_pin_ranges(chip);
-	gpiochip_free_valid_mask(chip);
+	gpiochip_irqchip_remove(gc);
+	acpi_gpiochip_remove(gc);
+	of_gpiochip_remove(gc);
+	gpiochip_remove_pin_ranges(gc);
+	gpiochip_free_valid_mask(gc);
 	/*
 	 * We accept no more calls into the driver from this point, so
 	 * NULL the driver data pointer
@@ -1635,13 +1822,12 @@ void gpiochip_remove(struct gpio_chip *chip)
 
 	spin_lock_irqsave(&gpio_lock, flags);
 	for (i = 0; i < gdev->ngpio; i++) {
-		desc = &gdev->descs[i];
-		if (test_bit(FLAG_REQUESTED, &desc->flags))
-			requested = true;
+		if (gpiochip_is_requested(gc, i))
+			break;
 	}
 	spin_unlock_irqrestore(&gpio_lock, flags);
 
-	if (requested)
+	if (i != gdev->ngpio)
 		dev_crit(&gdev->dev,
 			 "REMOVING GPIOCHIP WITH GPIOS STILL REQUESTED\n");
 
@@ -1656,52 +1842,6 @@ void gpiochip_remove(struct gpio_chip *chip)
 }
 EXPORT_SYMBOL_GPL(gpiochip_remove);
 
-static void devm_gpio_chip_release(struct device *dev, void *res)
-{
-	struct gpio_chip *chip = *(struct gpio_chip **)res;
-
-	gpiochip_remove(chip);
-}
-
-/**
- * devm_gpiochip_add_data() - Resource managed gpiochip_add_data()
- * @dev: pointer to the device that gpio_chip belongs to.
- * @chip: the chip to register, with chip->base initialized
- * @data: driver-private data associated with this chip
- *
- * Context: potentially before irqs will work
- *
- * The gpio chip automatically be released when the device is unbound.
- *
- * Returns:
- * A negative errno if the chip can't be registered, such as because the
- * chip->base is invalid or already associated with a different chip.
- * Otherwise it returns zero as a success code.
- */
-int devm_gpiochip_add_data(struct device *dev, struct gpio_chip *chip,
-			   void *data)
-{
-	struct gpio_chip **ptr;
-	int ret;
-
-	ptr = devres_alloc(devm_gpio_chip_release, sizeof(*ptr),
-			     GFP_KERNEL);
-	if (!ptr)
-		return -ENOMEM;
-
-	ret = gpiochip_add_data(chip, data);
-	if (ret < 0) {
-		devres_free(ptr);
-		return ret;
-	}
-
-	*ptr = chip;
-	devres_add(dev, ptr);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(devm_gpiochip_add_data);
-
 /**
  * gpiochip_find() - iterator for locating a specific gpio_chip
  * @data: data to pass to match function
@@ -1714,31 +1854,31 @@ EXPORT_SYMBOL_GPL(devm_gpiochip_add_data);
  * more gpio_chips.
  */
 struct gpio_chip *gpiochip_find(void *data,
-				int (*match)(struct gpio_chip *chip,
+				int (*match)(struct gpio_chip *gc,
 					     void *data))
 {
 	struct gpio_device *gdev;
-	struct gpio_chip *chip = NULL;
+	struct gpio_chip *gc = NULL;
 	unsigned long flags;
 
 	spin_lock_irqsave(&gpio_lock, flags);
 	list_for_each_entry(gdev, &gpio_devices, list)
 		if (gdev->chip && match(gdev->chip, data)) {
-			chip = gdev->chip;
+			gc = gdev->chip;
 			break;
 		}
 
 	spin_unlock_irqrestore(&gpio_lock, flags);
 
-	return chip;
+	return gc;
 }
 EXPORT_SYMBOL_GPL(gpiochip_find);
 
-static int gpiochip_match_name(struct gpio_chip *chip, void *data)
+static int gpiochip_match_name(struct gpio_chip *gc, void *data)
 {
 	const char *name = data;
 
-	return !strcmp(chip->label, name);
+	return !strcmp(gc->label, name);
 }
 
 static struct gpio_chip *find_chip_by_name(const char *name)
@@ -1778,21 +1918,21 @@ static int gpiochip_irqchip_init_valid_mask(struct gpio_chip *gc)
 	return 0;
 }
 
-static void gpiochip_irqchip_free_valid_mask(struct gpio_chip *gpiochip)
+static void gpiochip_irqchip_free_valid_mask(struct gpio_chip *gc)
 {
-	bitmap_free(gpiochip->irq.valid_mask);
-	gpiochip->irq.valid_mask = NULL;
+	bitmap_free(gc->irq.valid_mask);
+	gc->irq.valid_mask = NULL;
 }
 
-bool gpiochip_irqchip_irq_valid(const struct gpio_chip *gpiochip,
+bool gpiochip_irqchip_irq_valid(const struct gpio_chip *gc,
 				unsigned int offset)
 {
-	if (!gpiochip_line_is_valid(gpiochip, offset))
+	if (!gpiochip_line_is_valid(gc, offset))
 		return false;
 	/* No mask means all valid */
-	if (likely(!gpiochip->irq.valid_mask))
+	if (likely(!gc->irq.valid_mask))
 		return true;
-	return test_bit(offset, gpiochip->irq.valid_mask);
+	return test_bit(offset, gc->irq.valid_mask);
 }
 EXPORT_SYMBOL_GPL(gpiochip_irqchip_irq_valid);
 
@@ -1844,16 +1984,16 @@ static void gpiochip_set_cascaded_irqchip(struct gpio_chip *gc,
 
 /**
  * gpiochip_set_nested_irqchip() - connects a nested irqchip to a gpiochip
- * @gpiochip: the gpiochip to set the irqchip nested handler to
+ * @gc: the gpiochip to set the irqchip nested handler to
  * @irqchip: the irqchip to nest to the gpiochip
  * @parent_irq: the irq number corresponding to the parent IRQ for this
  * nested irqchip
  */
-void gpiochip_set_nested_irqchip(struct gpio_chip *gpiochip,
+void gpiochip_set_nested_irqchip(struct gpio_chip *gc,
 				 struct irq_chip *irqchip,
 				 unsigned int parent_irq)
 {
-	gpiochip_set_cascaded_irqchip(gpiochip, parent_irq, NULL);
+	gpiochip_set_cascaded_irqchip(gc, parent_irq, NULL);
 }
 EXPORT_SYMBOL_GPL(gpiochip_set_nested_irqchip);
 
@@ -2030,7 +2170,7 @@ static int gpiochip_hierarchy_irq_domain_alloc(struct irq_domain *d,
 	return ret;
 }
 
-static unsigned int gpiochip_child_offset_to_irq_noop(struct gpio_chip *chip,
+static unsigned int gpiochip_child_offset_to_irq_noop(struct gpio_chip *gc,
 						      unsigned int offset)
 {
 	return offset;
@@ -2090,7 +2230,7 @@ static bool gpiochip_hierarchy_is_hierarchical(struct gpio_chip *gc)
 	return !!gc->irq.parent_domain;
 }
 
-void *gpiochip_populate_parent_fwspec_twocell(struct gpio_chip *chip,
+void *gpiochip_populate_parent_fwspec_twocell(struct gpio_chip *gc,
 					     unsigned int parent_hwirq,
 					     unsigned int parent_type)
 {
@@ -2100,7 +2240,7 @@ void *gpiochip_populate_parent_fwspec_twocell(struct gpio_chip *chip,
 	if (!fwspec)
 		return NULL;
 
-	fwspec->fwnode = chip->irq.parent_domain->fwnode;
+	fwspec->fwnode = gc->irq.parent_domain->fwnode;
 	fwspec->param_count = 2;
 	fwspec->param[0] = parent_hwirq;
 	fwspec->param[1] = parent_type;
@@ -2109,7 +2249,7 @@ void *gpiochip_populate_parent_fwspec_twocell(struct gpio_chip *chip,
 }
 EXPORT_SYMBOL_GPL(gpiochip_populate_parent_fwspec_twocell);
 
-void *gpiochip_populate_parent_fwspec_fourcell(struct gpio_chip *chip,
+void *gpiochip_populate_parent_fwspec_fourcell(struct gpio_chip *gc,
 					      unsigned int parent_hwirq,
 					      unsigned int parent_type)
 {
@@ -2119,7 +2259,7 @@ void *gpiochip_populate_parent_fwspec_fourcell(struct gpio_chip *chip,
 	if (!fwspec)
 		return NULL;
 
-	fwspec->fwnode = chip->irq.parent_domain->fwnode;
+	fwspec->fwnode = gc->irq.parent_domain->fwnode;
 	fwspec->param_count = 4;
 	fwspec->param[0] = 0;
 	fwspec->param[1] = parent_hwirq;
@@ -2157,28 +2297,28 @@ static bool gpiochip_hierarchy_is_hierarchical(struct gpio_chip *gc)
 int gpiochip_irq_map(struct irq_domain *d, unsigned int irq,
 		     irq_hw_number_t hwirq)
 {
-	struct gpio_chip *chip = d->host_data;
+	struct gpio_chip *gc = d->host_data;
 	int ret = 0;
 
-	if (!gpiochip_irqchip_irq_valid(chip, hwirq))
+	if (!gpiochip_irqchip_irq_valid(gc, hwirq))
 		return -ENXIO;
 
-	irq_set_chip_data(irq, chip);
+	irq_set_chip_data(irq, gc);
 	/*
 	 * This lock class tells lockdep that GPIO irqs are in a different
 	 * category than their parents, so it won't report false recursion.
 	 */
-	irq_set_lockdep_class(irq, chip->irq.lock_key, chip->irq.request_key);
-	irq_set_chip_and_handler(irq, chip->irq.chip, chip->irq.handler);
+	irq_set_lockdep_class(irq, gc->irq.lock_key, gc->irq.request_key);
+	irq_set_chip_and_handler(irq, gc->irq.chip, gc->irq.handler);
 	/* Chips that use nested thread handlers have them marked */
-	if (chip->irq.threaded)
+	if (gc->irq.threaded)
 		irq_set_nested_thread(irq, 1);
 	irq_set_noprobe(irq);
 
-	if (chip->irq.num_parents == 1)
-		ret = irq_set_parent(irq, chip->irq.parents[0]);
-	else if (chip->irq.map)
-		ret = irq_set_parent(irq, chip->irq.map[hwirq]);
+	if (gc->irq.num_parents == 1)
+		ret = irq_set_parent(irq, gc->irq.parents[0]);
+	else if (gc->irq.map)
+		ret = irq_set_parent(irq, gc->irq.map[hwirq]);
 
 	if (ret < 0)
 		return ret;
@@ -2187,8 +2327,8 @@ int gpiochip_irq_map(struct irq_domain *d, unsigned int irq,
 	 * No set-up of the hardware will happen if IRQ_TYPE_NONE
 	 * is passed as default type.
 	 */
-	if (chip->irq.default_type != IRQ_TYPE_NONE)
-		irq_set_irq_type(irq, chip->irq.default_type);
+	if (gc->irq.default_type != IRQ_TYPE_NONE)
+		irq_set_irq_type(irq, gc->irq.default_type);
 
 	return 0;
 }
@@ -2196,9 +2336,9 @@ EXPORT_SYMBOL_GPL(gpiochip_irq_map);
 
 void gpiochip_irq_unmap(struct irq_domain *d, unsigned int irq)
 {
-	struct gpio_chip *chip = d->host_data;
+	struct gpio_chip *gc = d->host_data;
 
-	if (chip->irq.threaded)
+	if (gc->irq.threaded)
 		irq_set_nested_thread(irq, 0);
 	irq_set_chip_and_handler(irq, NULL, NULL);
 	irq_set_chip_data(irq, NULL);
@@ -2230,9 +2370,9 @@ static const struct irq_domain_ops gpiochip_domain_ops = {
 int gpiochip_irq_domain_activate(struct irq_domain *domain,
 				 struct irq_data *data, bool reserve)
 {
-	struct gpio_chip *chip = domain->host_data;
+	struct gpio_chip *gc = domain->host_data;
 
-	return gpiochip_lock_as_irq(chip, data->hwirq);
+	return gpiochip_lock_as_irq(gc, data->hwirq);
 }
 EXPORT_SYMBOL_GPL(gpiochip_irq_domain_activate);
 
@@ -2248,17 +2388,17 @@ EXPORT_SYMBOL_GPL(gpiochip_irq_domain_activate);
 void gpiochip_irq_domain_deactivate(struct irq_domain *domain,
 				    struct irq_data *data)
 {
-	struct gpio_chip *chip = domain->host_data;
+	struct gpio_chip *gc = domain->host_data;
 
-	return gpiochip_unlock_as_irq(chip, data->hwirq);
+	return gpiochip_unlock_as_irq(gc, data->hwirq);
 }
 EXPORT_SYMBOL_GPL(gpiochip_irq_domain_deactivate);
 
-static int gpiochip_to_irq(struct gpio_chip *chip, unsigned offset)
+static int gpiochip_to_irq(struct gpio_chip *gc, unsigned offset)
 {
-	struct irq_domain *domain = chip->irq.domain;
+	struct irq_domain *domain = gc->irq.domain;
 
-	if (!gpiochip_irqchip_irq_valid(chip, offset))
+	if (!gpiochip_irqchip_irq_valid(gc, offset))
 		return -ENXIO;
 
 #ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
@@ -2267,7 +2407,7 @@ static int gpiochip_to_irq(struct gpio_chip *chip, unsigned offset)
 
 		spec.fwnode = domain->fwnode;
 		spec.param_count = 2;
-		spec.param[0] = chip->irq.child_offset_to_irq(chip, offset);
+		spec.param[0] = gc->irq.child_offset_to_irq(gc, offset);
 		spec.param[1] = IRQ_TYPE_NONE;
 
 		return irq_create_fwspec_mapping(&spec);
@@ -2279,32 +2419,32 @@ static int gpiochip_to_irq(struct gpio_chip *chip, unsigned offset)
 
 static int gpiochip_irq_reqres(struct irq_data *d)
 {
-	struct gpio_chip *chip = irq_data_get_irq_chip_data(d);
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
 
-	return gpiochip_reqres_irq(chip, d->hwirq);
+	return gpiochip_reqres_irq(gc, d->hwirq);
 }
 
 static void gpiochip_irq_relres(struct irq_data *d)
 {
-	struct gpio_chip *chip = irq_data_get_irq_chip_data(d);
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
 
-	gpiochip_relres_irq(chip, d->hwirq);
+	gpiochip_relres_irq(gc, d->hwirq);
 }
 
 static void gpiochip_irq_enable(struct irq_data *d)
 {
-	struct gpio_chip *chip = irq_data_get_irq_chip_data(d);
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
 
-	gpiochip_enable_irq(chip, d->hwirq);
-	if (chip->irq.irq_enable)
-		chip->irq.irq_enable(d);
+	gpiochip_enable_irq(gc, d->hwirq);
+	if (gc->irq.irq_enable)
+		gc->irq.irq_enable(d);
 	else
-		chip->irq.chip->irq_unmask(d);
+		gc->irq.chip->irq_unmask(d);
 }
 
 static void gpiochip_irq_disable(struct irq_data *d)
 {
-	struct gpio_chip *chip = irq_data_get_irq_chip_data(d);
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
 
 	/*
 	 * Since we override .irq_disable() we need to mimic the
@@ -2313,23 +2453,23 @@ static void gpiochip_irq_disable(struct irq_data *d)
 	 * behaviour of mask_irq() which calls .irq_mask() if
 	 * it exists.
 	 */
-	if (chip->irq.irq_disable)
-		chip->irq.irq_disable(d);
-	else if (chip->irq.chip->irq_mask)
-		chip->irq.chip->irq_mask(d);
-	gpiochip_disable_irq(chip, d->hwirq);
+	if (gc->irq.irq_disable)
+		gc->irq.irq_disable(d);
+	else if (gc->irq.chip->irq_mask)
+		gc->irq.chip->irq_mask(d);
+	gpiochip_disable_irq(gc, d->hwirq);
 }
 
-static void gpiochip_set_irq_hooks(struct gpio_chip *gpiochip)
+static void gpiochip_set_irq_hooks(struct gpio_chip *gc)
 {
-	struct irq_chip *irqchip = gpiochip->irq.chip;
+	struct irq_chip *irqchip = gc->irq.chip;
 
 	if (!irqchip->irq_request_resources &&
 	    !irqchip->irq_release_resources) {
 		irqchip->irq_request_resources = gpiochip_irq_reqres;
 		irqchip->irq_release_resources = gpiochip_irq_relres;
 	}
-	if (WARN_ON(gpiochip->irq.irq_enable))
+	if (WARN_ON(gc->irq.irq_enable))
 		return;
 	/* Check if the irqchip already has this hook... */
 	if (irqchip->irq_enable == gpiochip_irq_enable) {
@@ -2337,27 +2477,27 @@ static void gpiochip_set_irq_hooks(struct gpio_chip *gpiochip)
 		 * ...and if so, give a gentle warning that this is bad
 		 * practice.
 		 */
-		chip_info(gpiochip,
+		chip_info(gc,
 			  "detected irqchip that is shared with multiple gpiochips: please fix the driver.\n");
 		return;
 	}
-	gpiochip->irq.irq_enable = irqchip->irq_enable;
-	gpiochip->irq.irq_disable = irqchip->irq_disable;
+	gc->irq.irq_enable = irqchip->irq_enable;
+	gc->irq.irq_disable = irqchip->irq_disable;
 	irqchip->irq_enable = gpiochip_irq_enable;
 	irqchip->irq_disable = gpiochip_irq_disable;
 }
 
 /**
  * gpiochip_add_irqchip() - adds an IRQ chip to a GPIO chip
- * @gpiochip: the GPIO chip to add the IRQ chip to
+ * @gc: the GPIO chip to add the IRQ chip to
  * @lock_key: lockdep class for IRQ lock
  * @request_key: lockdep class for IRQ request
  */
-static int gpiochip_add_irqchip(struct gpio_chip *gpiochip,
+static int gpiochip_add_irqchip(struct gpio_chip *gc,
 				struct lock_class_key *lock_key,
 				struct lock_class_key *request_key)
 {
-	struct irq_chip *irqchip = gpiochip->irq.chip;
+	struct irq_chip *irqchip = gc->irq.chip;
 	const struct irq_domain_ops *ops = NULL;
 	struct device_node *np;
 	unsigned int type;
@@ -2366,13 +2506,13 @@ static int gpiochip_add_irqchip(struct gpio_chip *gpiochip,
 	if (!irqchip)
 		return 0;
 
-	if (gpiochip->irq.parent_handler && gpiochip->can_sleep) {
-		chip_err(gpiochip, "you cannot have chained interrupts on a chip that may sleep\n");
+	if (gc->irq.parent_handler && gc->can_sleep) {
+		chip_err(gc, "you cannot have chained interrupts on a chip that may sleep\n");
 		return -EINVAL;
 	}
 
-	np = gpiochip->gpiodev->dev.of_node;
-	type = gpiochip->irq.default_type;
+	np = gc->gpiodev->dev.of_node;
+	type = gc->irq.default_type;
 
 	/*
 	 * Specifying a default trigger is a terrible idea if DT or ACPI is
@@ -2383,74 +2523,74 @@ static int gpiochip_add_irqchip(struct gpio_chip *gpiochip,
 		 "%s: Ignoring %u default trigger\n", np->full_name, type))
 		type = IRQ_TYPE_NONE;
 
-	if (has_acpi_companion(gpiochip->parent) && type != IRQ_TYPE_NONE) {
-		acpi_handle_warn(ACPI_HANDLE(gpiochip->parent),
+	if (has_acpi_companion(gc->parent) && type != IRQ_TYPE_NONE) {
+		acpi_handle_warn(ACPI_HANDLE(gc->parent),
 				 "Ignoring %u default trigger\n", type);
 		type = IRQ_TYPE_NONE;
 	}
 
-	gpiochip->to_irq = gpiochip_to_irq;
-	gpiochip->irq.default_type = type;
-	gpiochip->irq.lock_key = lock_key;
-	gpiochip->irq.request_key = request_key;
+	gc->to_irq = gpiochip_to_irq;
+	gc->irq.default_type = type;
+	gc->irq.lock_key = lock_key;
+	gc->irq.request_key = request_key;
 
 	/* If a parent irqdomain is provided, let's build a hierarchy */
-	if (gpiochip_hierarchy_is_hierarchical(gpiochip)) {
-		int ret = gpiochip_hierarchy_add_domain(gpiochip);
+	if (gpiochip_hierarchy_is_hierarchical(gc)) {
+		int ret = gpiochip_hierarchy_add_domain(gc);
 		if (ret)
 			return ret;
 	} else {
 		/* Some drivers provide custom irqdomain ops */
-		if (gpiochip->irq.domain_ops)
-			ops = gpiochip->irq.domain_ops;
+		if (gc->irq.domain_ops)
+			ops = gc->irq.domain_ops;
 
 		if (!ops)
 			ops = &gpiochip_domain_ops;
-		gpiochip->irq.domain = irq_domain_add_simple(np,
-			gpiochip->ngpio,
-			gpiochip->irq.first,
-			ops, gpiochip);
-		if (!gpiochip->irq.domain)
+		gc->irq.domain = irq_domain_add_simple(np,
+			gc->ngpio,
+			gc->irq.first,
+			ops, gc);
+		if (!gc->irq.domain)
 			return -EINVAL;
 	}
 
-	if (gpiochip->irq.parent_handler) {
-		void *data = gpiochip->irq.parent_handler_data ?: gpiochip;
+	if (gc->irq.parent_handler) {
+		void *data = gc->irq.parent_handler_data ?: gc;
 
-		for (i = 0; i < gpiochip->irq.num_parents; i++) {
+		for (i = 0; i < gc->irq.num_parents; i++) {
 			/*
 			 * The parent IRQ chip is already using the chip_data
 			 * for this IRQ chip, so our callbacks simply use the
 			 * handler_data.
 			 */
-			irq_set_chained_handler_and_data(gpiochip->irq.parents[i],
-							 gpiochip->irq.parent_handler,
+			irq_set_chained_handler_and_data(gc->irq.parents[i],
+							 gc->irq.parent_handler,
 							 data);
 		}
 	}
 
-	gpiochip_set_irq_hooks(gpiochip);
+	gpiochip_set_irq_hooks(gc);
 
-	acpi_gpiochip_request_interrupts(gpiochip);
+	acpi_gpiochip_request_interrupts(gc);
 
 	return 0;
 }
 
 /**
  * gpiochip_irqchip_remove() - removes an irqchip added to a gpiochip
- * @gpiochip: the gpiochip to remove the irqchip from
+ * @gc: the gpiochip to remove the irqchip from
  *
  * This is called only from gpiochip_remove()
  */
-static void gpiochip_irqchip_remove(struct gpio_chip *gpiochip)
+static void gpiochip_irqchip_remove(struct gpio_chip *gc)
 {
-	struct irq_chip *irqchip = gpiochip->irq.chip;
+	struct irq_chip *irqchip = gc->irq.chip;
 	unsigned int offset;
 
-	acpi_gpiochip_free_interrupts(gpiochip);
+	acpi_gpiochip_free_interrupts(gc);
 
-	if (irqchip && gpiochip->irq.parent_handler) {
-		struct gpio_irq_chip *irq = &gpiochip->irq;
+	if (irqchip && gc->irq.parent_handler) {
+		struct gpio_irq_chip *irq = &gc->irq;
 		unsigned int i;
 
 		for (i = 0; i < irq->num_parents; i++)
@@ -2459,18 +2599,18 @@ static void gpiochip_irqchip_remove(struct gpio_chip *gpiochip)
 	}
 
 	/* Remove all IRQ mappings and delete the domain */
-	if (gpiochip->irq.domain) {
+	if (gc->irq.domain) {
 		unsigned int irq;
 
-		for (offset = 0; offset < gpiochip->ngpio; offset++) {
-			if (!gpiochip_irqchip_irq_valid(gpiochip, offset))
+		for (offset = 0; offset < gc->ngpio; offset++) {
+			if (!gpiochip_irqchip_irq_valid(gc, offset))
 				continue;
 
-			irq = irq_find_mapping(gpiochip->irq.domain, offset);
+			irq = irq_find_mapping(gc->irq.domain, offset);
 			irq_dispose_mapping(irq);
 		}
 
-		irq_domain_remove(gpiochip->irq.domain);
+		irq_domain_remove(gc->irq.domain);
 	}
 
 	if (irqchip) {
@@ -2479,20 +2619,20 @@ static void gpiochip_irqchip_remove(struct gpio_chip *gpiochip)
 			irqchip->irq_release_resources = NULL;
 		}
 		if (irqchip->irq_enable == gpiochip_irq_enable) {
-			irqchip->irq_enable = gpiochip->irq.irq_enable;
-			irqchip->irq_disable = gpiochip->irq.irq_disable;
+			irqchip->irq_enable = gc->irq.irq_enable;
+			irqchip->irq_disable = gc->irq.irq_disable;
 		}
 	}
-	gpiochip->irq.irq_enable = NULL;
-	gpiochip->irq.irq_disable = NULL;
-	gpiochip->irq.chip = NULL;
+	gc->irq.irq_enable = NULL;
+	gc->irq.irq_disable = NULL;
+	gc->irq.chip = NULL;
 
-	gpiochip_irqchip_free_valid_mask(gpiochip);
+	gpiochip_irqchip_free_valid_mask(gc);
 }
 
 /**
  * gpiochip_irqchip_add_key() - adds an irqchip to a gpiochip
- * @gpiochip: the gpiochip to add the irqchip to
+ * @gc: the gpiochip to add the irqchip to
  * @irqchip: the irqchip to add to the gpiochip
  * @first_irq: if not dynamically assigned, the base (first) IRQ to
  * allocate gpiochip irqs from
@@ -2517,7 +2657,7 @@ static void gpiochip_irqchip_remove(struct gpio_chip *gpiochip)
  * the pins on the gpiochip can generate a unique IRQ. Everything else
  * need to be open coded.
  */
-int gpiochip_irqchip_add_key(struct gpio_chip *gpiochip,
+int gpiochip_irqchip_add_key(struct gpio_chip *gc,
 			     struct irq_chip *irqchip,
 			     unsigned int first_irq,
 			     irq_flow_handler_t handler,
@@ -2528,23 +2668,23 @@ int gpiochip_irqchip_add_key(struct gpio_chip *gpiochip,
 {
 	struct device_node *of_node;
 
-	if (!gpiochip || !irqchip)
+	if (!gc || !irqchip)
 		return -EINVAL;
 
-	if (!gpiochip->parent) {
+	if (!gc->parent) {
 		pr_err("missing gpiochip .dev parent pointer\n");
 		return -EINVAL;
 	}
-	gpiochip->irq.threaded = threaded;
-	of_node = gpiochip->parent->of_node;
+	gc->irq.threaded = threaded;
+	of_node = gc->parent->of_node;
 #ifdef CONFIG_OF_GPIO
 	/*
 	 * If the gpiochip has an assigned OF node this takes precedence
-	 * FIXME: get rid of this and use gpiochip->parent->of_node
+	 * FIXME: get rid of this and use gc->parent->of_node
 	 * everywhere
 	 */
-	if (gpiochip->of_node)
-		of_node = gpiochip->of_node;
+	if (gc->of_node)
+		of_node = gc->of_node;
 #endif
 	/*
 	 * Specifying a default trigger is a terrible idea if DT or ACPI is
@@ -2554,29 +2694,29 @@ int gpiochip_irqchip_add_key(struct gpio_chip *gpiochip,
 	if (WARN(of_node && type != IRQ_TYPE_NONE,
 		 "%pOF: Ignoring %d default trigger\n", of_node, type))
 		type = IRQ_TYPE_NONE;
-	if (has_acpi_companion(gpiochip->parent) && type != IRQ_TYPE_NONE) {
-		acpi_handle_warn(ACPI_HANDLE(gpiochip->parent),
+	if (has_acpi_companion(gc->parent) && type != IRQ_TYPE_NONE) {
+		acpi_handle_warn(ACPI_HANDLE(gc->parent),
 				 "Ignoring %d default trigger\n", type);
 		type = IRQ_TYPE_NONE;
 	}
 
-	gpiochip->irq.chip = irqchip;
-	gpiochip->irq.handler = handler;
-	gpiochip->irq.default_type = type;
-	gpiochip->to_irq = gpiochip_to_irq;
-	gpiochip->irq.lock_key = lock_key;
-	gpiochip->irq.request_key = request_key;
-	gpiochip->irq.domain = irq_domain_add_simple(of_node,
-					gpiochip->ngpio, first_irq,
-					&gpiochip_domain_ops, gpiochip);
-	if (!gpiochip->irq.domain) {
-		gpiochip->irq.chip = NULL;
+	gc->irq.chip = irqchip;
+	gc->irq.handler = handler;
+	gc->irq.default_type = type;
+	gc->to_irq = gpiochip_to_irq;
+	gc->irq.lock_key = lock_key;
+	gc->irq.request_key = request_key;
+	gc->irq.domain = irq_domain_add_simple(of_node,
+					gc->ngpio, first_irq,
+					&gpiochip_domain_ops, gc);
+	if (!gc->irq.domain) {
+		gc->irq.chip = NULL;
 		return -EINVAL;
 	}
 
-	gpiochip_set_irq_hooks(gpiochip);
+	gpiochip_set_irq_hooks(gc);
 
-	acpi_gpiochip_request_interrupts(gpiochip);
+	acpi_gpiochip_request_interrupts(gc);
 
 	return 0;
 }
@@ -2584,60 +2724,65 @@ EXPORT_SYMBOL_GPL(gpiochip_irqchip_add_key);
 
 #else /* CONFIG_GPIOLIB_IRQCHIP */
 
-static inline int gpiochip_add_irqchip(struct gpio_chip *gpiochip,
+static inline int gpiochip_add_irqchip(struct gpio_chip *gc,
 				       struct lock_class_key *lock_key,
 				       struct lock_class_key *request_key)
 {
 	return 0;
 }
-static void gpiochip_irqchip_remove(struct gpio_chip *gpiochip) {}
+static void gpiochip_irqchip_remove(struct gpio_chip *gc) {}
 
-static inline int gpiochip_irqchip_init_hw(struct gpio_chip *gpiochip)
+static inline int gpiochip_irqchip_init_hw(struct gpio_chip *gc)
 {
 	return 0;
 }
 
-static inline int gpiochip_irqchip_init_valid_mask(struct gpio_chip *gpiochip)
+static inline int gpiochip_irqchip_init_valid_mask(struct gpio_chip *gc)
 {
 	return 0;
 }
-static inline void gpiochip_irqchip_free_valid_mask(struct gpio_chip *gpiochip)
+static inline void gpiochip_irqchip_free_valid_mask(struct gpio_chip *gc)
 { }
 
 #endif /* CONFIG_GPIOLIB_IRQCHIP */
 
 /**
  * gpiochip_generic_request() - request the gpio function for a pin
- * @chip: the gpiochip owning the GPIO
+ * @gc: the gpiochip owning the GPIO
  * @offset: the offset of the GPIO to request for GPIO function
  */
-int gpiochip_generic_request(struct gpio_chip *chip, unsigned offset)
+int gpiochip_generic_request(struct gpio_chip *gc, unsigned offset)
 {
-	return pinctrl_gpio_request(chip->gpiodev->base + offset);
+#ifdef CONFIG_PINCTRL
+	if (list_empty(&gc->gpiodev->pin_ranges))
+		return 0;
+#endif
+
+	return pinctrl_gpio_request(gc->gpiodev->base + offset);
 }
 EXPORT_SYMBOL_GPL(gpiochip_generic_request);
 
 /**
  * gpiochip_generic_free() - free the gpio function from a pin
- * @chip: the gpiochip to request the gpio function for
+ * @gc: the gpiochip to request the gpio function for
  * @offset: the offset of the GPIO to free from GPIO function
  */
-void gpiochip_generic_free(struct gpio_chip *chip, unsigned offset)
+void gpiochip_generic_free(struct gpio_chip *gc, unsigned offset)
 {
-	pinctrl_gpio_free(chip->gpiodev->base + offset);
+	pinctrl_gpio_free(gc->gpiodev->base + offset);
 }
 EXPORT_SYMBOL_GPL(gpiochip_generic_free);
 
 /**
  * gpiochip_generic_config() - apply configuration for a pin
- * @chip: the gpiochip owning the GPIO
+ * @gc: the gpiochip owning the GPIO
  * @offset: the offset of the GPIO to apply the configuration
  * @config: the configuration to be applied
  */
-int gpiochip_generic_config(struct gpio_chip *chip, unsigned offset,
+int gpiochip_generic_config(struct gpio_chip *gc, unsigned offset,
 			    unsigned long config)
 {
-	return pinctrl_gpio_set_config(chip->gpiodev->base + offset, config);
+	return pinctrl_gpio_set_config(gc->gpiodev->base + offset, config);
 }
 EXPORT_SYMBOL_GPL(gpiochip_generic_config);
 
@@ -2645,7 +2790,7 @@ EXPORT_SYMBOL_GPL(gpiochip_generic_config);
 
 /**
  * gpiochip_add_pingroup_range() - add a range for GPIO <-> pin mapping
- * @chip: the gpiochip to add the range for
+ * @gc: the gpiochip to add the range for
  * @pctldev: the pin controller to map to
  * @gpio_offset: the start offset in the current gpio_chip number space
  * @pin_group: name of the pin group inside the pin controller
@@ -2655,24 +2800,24 @@ EXPORT_SYMBOL_GPL(gpiochip_generic_config);
  * Documentation/devicetree/bindings/gpio/gpio.txt on how to
  * bind pinctrl and gpio drivers via the "gpio-ranges" property.
  */
-int gpiochip_add_pingroup_range(struct gpio_chip *chip,
+int gpiochip_add_pingroup_range(struct gpio_chip *gc,
 			struct pinctrl_dev *pctldev,
 			unsigned int gpio_offset, const char *pin_group)
 {
 	struct gpio_pin_range *pin_range;
-	struct gpio_device *gdev = chip->gpiodev;
+	struct gpio_device *gdev = gc->gpiodev;
 	int ret;
 
 	pin_range = kzalloc(sizeof(*pin_range), GFP_KERNEL);
 	if (!pin_range) {
-		chip_err(chip, "failed to allocate pin ranges\n");
+		chip_err(gc, "failed to allocate pin ranges\n");
 		return -ENOMEM;
 	}
 
 	/* Use local offset as range ID */
 	pin_range->range.id = gpio_offset;
-	pin_range->range.gc = chip;
-	pin_range->range.name = chip->label;
+	pin_range->range.gc = gc;
+	pin_range->range.name = gc->label;
 	pin_range->range.base = gdev->base + gpio_offset;
 	pin_range->pctldev = pctldev;
 
@@ -2686,7 +2831,7 @@ int gpiochip_add_pingroup_range(struct gpio_chip *chip,
 
 	pinctrl_add_gpio_range(pctldev, &pin_range->range);
 
-	chip_dbg(chip, "created GPIO range %d->%d ==> %s PINGRP %s\n",
+	chip_dbg(gc, "created GPIO range %d->%d ==> %s PINGRP %s\n",
 		 gpio_offset, gpio_offset + pin_range->range.npins - 1,
 		 pinctrl_dev_get_devname(pctldev), pin_group);
 
@@ -2698,7 +2843,7 @@ EXPORT_SYMBOL_GPL(gpiochip_add_pingroup_range);
 
 /**
  * gpiochip_add_pin_range() - add a range for GPIO <-> pin mapping
- * @chip: the gpiochip to add the range for
+ * @gc: the gpiochip to add the range for
  * @pinctl_name: the dev_name() of the pin controller to map to
  * @gpio_offset: the start offset in the current gpio_chip number space
  * @pin_offset: the start offset in the pin controller number space
@@ -2713,24 +2858,24 @@ EXPORT_SYMBOL_GPL(gpiochip_add_pingroup_range);
  * Documentation/devicetree/bindings/gpio/gpio.txt on how to
  * bind pinctrl and gpio drivers via the "gpio-ranges" property.
  */
-int gpiochip_add_pin_range(struct gpio_chip *chip, const char *pinctl_name,
+int gpiochip_add_pin_range(struct gpio_chip *gc, const char *pinctl_name,
 			   unsigned int gpio_offset, unsigned int pin_offset,
 			   unsigned int npins)
 {
 	struct gpio_pin_range *pin_range;
-	struct gpio_device *gdev = chip->gpiodev;
+	struct gpio_device *gdev = gc->gpiodev;
 	int ret;
 
 	pin_range = kzalloc(sizeof(*pin_range), GFP_KERNEL);
 	if (!pin_range) {
-		chip_err(chip, "failed to allocate pin ranges\n");
+		chip_err(gc, "failed to allocate pin ranges\n");
 		return -ENOMEM;
 	}
 
 	/* Use local offset as range ID */
 	pin_range->range.id = gpio_offset;
-	pin_range->range.gc = chip;
-	pin_range->range.name = chip->label;
+	pin_range->range.gc = gc;
+	pin_range->range.name = gc->label;
 	pin_range->range.base = gdev->base + gpio_offset;
 	pin_range->range.pin_base = pin_offset;
 	pin_range->range.npins = npins;
@@ -2738,11 +2883,11 @@ int gpiochip_add_pin_range(struct gpio_chip *chip, const char *pinctl_name,
 			&pin_range->range);
 	if (IS_ERR(pin_range->pctldev)) {
 		ret = PTR_ERR(pin_range->pctldev);
-		chip_err(chip, "could not create pin range\n");
+		chip_err(gc, "could not create pin range\n");
 		kfree(pin_range);
 		return ret;
 	}
-	chip_dbg(chip, "created GPIO range %d->%d ==> %s PIN %d->%d\n",
+	chip_dbg(gc, "created GPIO range %d->%d ==> %s PIN %d->%d\n",
 		 gpio_offset, gpio_offset + npins - 1,
 		 pinctl_name,
 		 pin_offset, pin_offset + npins - 1);
@@ -2755,12 +2900,12 @@ EXPORT_SYMBOL_GPL(gpiochip_add_pin_range);
 
 /**
  * gpiochip_remove_pin_ranges() - remove all the GPIO <-> pin mappings
- * @chip: the chip to remove all the mappings for
+ * @gc: the chip to remove all the mappings for
  */
-void gpiochip_remove_pin_ranges(struct gpio_chip *chip)
+void gpiochip_remove_pin_ranges(struct gpio_chip *gc)
 {
 	struct gpio_pin_range *pin_range, *tmp;
-	struct gpio_device *gdev = chip->gpiodev;
+	struct gpio_device *gdev = gc->gpiodev;
 
 	list_for_each_entry_safe(pin_range, tmp, &gdev->pin_ranges, node) {
 		list_del(&pin_range->node);
@@ -2779,7 +2924,7 @@ EXPORT_SYMBOL_GPL(gpiochip_remove_pin_ranges);
  */
 static int gpiod_request_commit(struct gpio_desc *desc, const char *label)
 {
-	struct gpio_chip	*chip = desc->gdev->chip;
+	struct gpio_chip	*gc = desc->gdev->chip;
 	int			ret;
 	unsigned long		flags;
 	unsigned		offset;
@@ -2805,12 +2950,12 @@ static int gpiod_request_commit(struct gpio_desc *desc, const char *label)
 		goto done;
 	}
 
-	if (chip->request) {
-		/* chip->request may sleep */
+	if (gc->request) {
+		/* gc->request may sleep */
 		spin_unlock_irqrestore(&gpio_lock, flags);
 		offset = gpio_chip_hwgpio(desc);
-		if (gpiochip_line_is_valid(chip, offset))
-			ret = chip->request(chip, offset);
+		if (gpiochip_line_is_valid(gc, offset))
+			ret = gc->request(gc, offset);
 		else
 			ret = -EINVAL;
 		spin_lock_irqsave(&gpio_lock, flags);
@@ -2822,14 +2967,16 @@ static int gpiod_request_commit(struct gpio_desc *desc, const char *label)
 			goto done;
 		}
 	}
-	if (chip->get_direction) {
-		/* chip->get_direction may sleep */
+	if (gc->get_direction) {
+		/* gc->get_direction may sleep */
 		spin_unlock_irqrestore(&gpio_lock, flags);
 		gpiod_get_direction(desc);
 		spin_lock_irqsave(&gpio_lock, flags);
 	}
 done:
 	spin_unlock_irqrestore(&gpio_lock, flags);
+	atomic_notifier_call_chain(&desc->gdev->notifier,
+				   GPIOLINE_CHANGED_REQUESTED, desc);
 	return ret;
 }
 
@@ -2897,7 +3044,7 @@ static bool gpiod_free_commit(struct gpio_desc *desc)
 {
 	bool			ret = false;
 	unsigned long		flags;
-	struct gpio_chip	*chip;
+	struct gpio_chip	*gc;
 
 	might_sleep();
 
@@ -2905,12 +3052,12 @@ static bool gpiod_free_commit(struct gpio_desc *desc)
 
 	spin_lock_irqsave(&gpio_lock, flags);
 
-	chip = desc->gdev->chip;
-	if (chip && test_bit(FLAG_REQUESTED, &desc->flags)) {
-		if (chip->free) {
+	gc = desc->gdev->chip;
+	if (gc && test_bit(FLAG_REQUESTED, &desc->flags)) {
+		if (gc->free) {
 			spin_unlock_irqrestore(&gpio_lock, flags);
-			might_sleep_if(chip->can_sleep);
-			chip->free(chip, gpio_chip_hwgpio(desc));
+			might_sleep_if(gc->can_sleep);
+			gc->free(gc, gpio_chip_hwgpio(desc));
 			spin_lock_irqsave(&gpio_lock, flags);
 		}
 		kfree_const(desc->label);
@@ -2923,10 +3070,16 @@ static bool gpiod_free_commit(struct gpio_desc *desc)
 		clear_bit(FLAG_PULL_DOWN, &desc->flags);
 		clear_bit(FLAG_BIAS_DISABLE, &desc->flags);
 		clear_bit(FLAG_IS_HOGGED, &desc->flags);
+#ifdef CONFIG_OF_DYNAMIC
+		desc->hog = NULL;
+#endif
 		ret = true;
 	}
 
 	spin_unlock_irqrestore(&gpio_lock, flags);
+	atomic_notifier_call_chain(&desc->gdev->notifier,
+				   GPIOLINE_CHANGED_RELEASED, desc);
+
 	return ret;
 }
 
@@ -2942,7 +3095,7 @@ void gpiod_free(struct gpio_desc *desc)
 
 /**
  * gpiochip_is_requested - return string iff signal was requested
- * @chip: controller managing the signal
+ * @gc: controller managing the signal
  * @offset: of signal within controller's 0..(ngpio - 1) range
  *
  * Returns NULL if the GPIO is not currently requested, else a string.
@@ -2953,14 +3106,16 @@ void gpiod_free(struct gpio_desc *desc)
  * help with diagnostics, and knowing that the signal is used as a GPIO
  * can help avoid accidentally multiplexing it to another controller.
  */
-const char *gpiochip_is_requested(struct gpio_chip *chip, unsigned offset)
+const char *gpiochip_is_requested(struct gpio_chip *gc, unsigned offset)
 {
 	struct gpio_desc *desc;
 
-	if (offset >= chip->ngpio)
+	if (offset >= gc->ngpio)
 		return NULL;
 
-	desc = &chip->gpiodev->descs[offset];
+	desc = gpiochip_get_desc(gc, offset);
+	if (IS_ERR(desc))
+		return NULL;
 
 	if (test_bit(FLAG_REQUESTED, &desc->flags) == 0)
 		return NULL;
@@ -2970,7 +3125,7 @@ EXPORT_SYMBOL_GPL(gpiochip_is_requested);
 
 /**
  * gpiochip_request_own_desc - Allow GPIO chip to request its own descriptor
- * @chip: GPIO chip
+ * @gc: GPIO chip
  * @hwnum: hardware number of the GPIO for which to request the descriptor
  * @label: label for the GPIO
  * @lflags: lookup flags for this GPIO or 0 if default, this can be used to
@@ -2989,17 +3144,17 @@ EXPORT_SYMBOL_GPL(gpiochip_is_requested);
  * A pointer to the GPIO descriptor, or an ERR_PTR()-encoded negative error
  * code on failure.
  */
-struct gpio_desc *gpiochip_request_own_desc(struct gpio_chip *chip,
+struct gpio_desc *gpiochip_request_own_desc(struct gpio_chip *gc,
 					    unsigned int hwnum,
 					    const char *label,
 					    enum gpio_lookup_flags lflags,
 					    enum gpiod_flags dflags)
 {
-	struct gpio_desc *desc = gpiochip_get_desc(chip, hwnum);
+	struct gpio_desc *desc = gpiochip_get_desc(gc, hwnum);
 	int ret;
 
 	if (IS_ERR(desc)) {
-		chip_err(chip, "failed to get GPIO descriptor\n");
+		chip_err(gc, "failed to get GPIO descriptor\n");
 		return desc;
 	}
 
@@ -3009,7 +3164,7 @@ struct gpio_desc *gpiochip_request_own_desc(struct gpio_chip *chip,
 
 	ret = gpiod_configure_flags(desc, label, lflags, dflags);
 	if (ret) {
-		chip_err(chip, "setup of own GPIO %s failed\n", label);
+		chip_err(gc, "setup of own GPIO %s failed\n", label);
 		gpiod_free_commit(desc);
 		return ERR_PTR(ret);
 	}
@@ -3051,9 +3206,9 @@ static int gpio_do_set_config(struct gpio_chip *gc, unsigned int offset,
 	return gc->set_config(gc, offset, config);
 }
 
-static int gpio_set_config(struct gpio_chip *gc, unsigned int offset,
-			   enum pin_config_param mode)
+static int gpio_set_config(struct gpio_desc *desc, enum pin_config_param mode)
 {
+	struct gpio_chip *gc = desc->gdev->chip;
 	unsigned long config;
 	unsigned arg;
 
@@ -3068,10 +3223,10 @@ static int gpio_set_config(struct gpio_chip *gc, unsigned int offset,
 	}
 
 	config = PIN_CONF_PACKED(mode, arg);
-	return gpio_do_set_config(gc, offset, config);
+	return gpio_do_set_config(gc, gpio_chip_hwgpio(desc), config);
 }
 
-static int gpio_set_bias(struct gpio_chip *chip, struct gpio_desc *desc)
+static int gpio_set_bias(struct gpio_desc *desc)
 {
 	int bias = 0;
 	int ret = 0;
@@ -3084,7 +3239,7 @@ static int gpio_set_bias(struct gpio_chip *chip, struct gpio_desc *desc)
 		bias = PIN_CONFIG_BIAS_PULL_DOWN;
 
 	if (bias) {
-		ret = gpio_set_config(chip, gpio_chip_hwgpio(desc), bias);
+		ret = gpio_set_config(desc, bias);
 		if (ret != -ENOTSUPP)
 			return ret;
 	}
@@ -3102,18 +3257,18 @@ static int gpio_set_bias(struct gpio_chip *chip, struct gpio_desc *desc)
  */
 int gpiod_direction_input(struct gpio_desc *desc)
 {
-	struct gpio_chip	*chip;
+	struct gpio_chip	*gc;
 	int			ret = 0;
 
 	VALIDATE_DESC(desc);
-	chip = desc->gdev->chip;
+	gc = desc->gdev->chip;
 
 	/*
 	 * It is legal to have no .get() and .direction_input() specified if
 	 * the chip is output-only, but you can't specify .direction_input()
 	 * and not support the .get() operation, that doesn't make sense.
 	 */
-	if (!chip->get && chip->direction_input) {
+	if (!gc->get && gc->direction_input) {
 		gpiod_warn(desc,
 			   "%s: missing get() but have direction_input()\n",
 			   __func__);
@@ -3126,10 +3281,10 @@ int gpiod_direction_input(struct gpio_desc *desc)
 	 * direction (if .get_direction() is supported) else we silently
 	 * assume we are in input mode after this.
 	 */
-	if (chip->direction_input) {
-		ret = chip->direction_input(chip, gpio_chip_hwgpio(desc));
-	} else if (chip->get_direction &&
-		  (chip->get_direction(chip, gpio_chip_hwgpio(desc)) != 1)) {
+	if (gc->direction_input) {
+		ret = gc->direction_input(gc, gpio_chip_hwgpio(desc));
+	} else if (gc->get_direction &&
+		  (gc->get_direction(gc, gpio_chip_hwgpio(desc)) != 1)) {
 		gpiod_warn(desc,
 			   "%s: missing direction_input() operation and line is output\n",
 			   __func__);
@@ -3137,7 +3292,7 @@ int gpiod_direction_input(struct gpio_desc *desc)
 	}
 	if (ret == 0) {
 		clear_bit(FLAG_IS_OUT, &desc->flags);
-		ret = gpio_set_bias(chip, desc);
+		ret = gpio_set_bias(desc);
 	}
 
 	trace_gpio_direction(desc_to_gpio(desc), 1, ret);
@@ -3221,7 +3376,6 @@ EXPORT_SYMBOL_GPL(gpiod_direction_output_raw);
  */
 int gpiod_direction_output(struct gpio_desc *desc, int value)
 {
-	struct gpio_chip *gc;
 	int ret;
 
 	VALIDATE_DESC(desc);
@@ -3239,11 +3393,9 @@ int gpiod_direction_output(struct gpio_desc *desc, int value)
 		return -EIO;
 	}
 
-	gc = desc->gdev->chip;
 	if (test_bit(FLAG_OPEN_DRAIN, &desc->flags)) {
 		/* First see if we can enable open drain in hardware */
-		ret = gpio_set_config(gc, gpio_chip_hwgpio(desc),
-				      PIN_CONFIG_DRIVE_OPEN_DRAIN);
+		ret = gpio_set_config(desc, PIN_CONFIG_DRIVE_OPEN_DRAIN);
 		if (!ret)
 			goto set_output_value;
 		/* Emulate open drain by not actively driving the line high */
@@ -3253,8 +3405,7 @@ int gpiod_direction_output(struct gpio_desc *desc, int value)
 		}
 	}
 	else if (test_bit(FLAG_OPEN_SOURCE, &desc->flags)) {
-		ret = gpio_set_config(gc, gpio_chip_hwgpio(desc),
-				      PIN_CONFIG_DRIVE_OPEN_SOURCE);
+		ret = gpio_set_config(desc, PIN_CONFIG_DRIVE_OPEN_SOURCE);
 		if (!ret)
 			goto set_output_value;
 		/* Emulate open source by not actively driving the line low */
@@ -3263,12 +3414,11 @@ int gpiod_direction_output(struct gpio_desc *desc, int value)
 			goto set_output_flag;
 		}
 	} else {
-		gpio_set_config(gc, gpio_chip_hwgpio(desc),
-				PIN_CONFIG_DRIVE_PUSH_PULL);
+		gpio_set_config(desc, PIN_CONFIG_DRIVE_PUSH_PULL);
 	}
 
 set_output_value:
-	ret = gpio_set_bias(gc, desc);
+	ret = gpio_set_bias(desc);
 	if (ret)
 		return ret;
 	return gpiod_direction_output_raw_commit(desc, value);
@@ -3287,6 +3437,26 @@ int gpiod_direction_output(struct gpio_desc *desc, int value)
 EXPORT_SYMBOL_GPL(gpiod_direction_output);
 
 /**
+ * gpiod_set_config - sets @config for a GPIO
+ * @desc: descriptor of the GPIO for which to set the configuration
+ * @config: Same packed config format as generic pinconf
+ *
+ * Returns:
+ * 0 on success, %-ENOTSUPP if the controller doesn't support setting the
+ * configuration.
+ */
+int gpiod_set_config(struct gpio_desc *desc, unsigned long config)
+{
+	struct gpio_chip *gc;
+
+	VALIDATE_DESC(desc);
+	gc = desc->gdev->chip;
+
+	return gpio_do_set_config(gc, gpio_chip_hwgpio(desc), config);
+}
+EXPORT_SYMBOL_GPL(gpiod_set_config);
+
+/**
  * gpiod_set_debounce - sets @debounce time for a GPIO
  * @desc: descriptor of the GPIO for which to set debounce time
  * @debounce: debounce time in microseconds
@@ -3297,14 +3467,10 @@ EXPORT_SYMBOL_GPL(gpiod_direction_output);
  */
 int gpiod_set_debounce(struct gpio_desc *desc, unsigned debounce)
 {
-	struct gpio_chip	*chip;
-	unsigned long		config;
-
-	VALIDATE_DESC(desc);
-	chip = desc->gdev->chip;
+	unsigned long config;
 
 	config = pinconf_to_config_packed(PIN_CONFIG_INPUT_DEBOUNCE, debounce);
-	return gpio_do_set_config(chip, gpio_chip_hwgpio(desc), config);
+	return gpiod_set_config(desc, config);
 }
 EXPORT_SYMBOL_GPL(gpiod_set_debounce);
 
@@ -3318,7 +3484,7 @@ EXPORT_SYMBOL_GPL(gpiod_set_debounce);
  */
 int gpiod_set_transitory(struct gpio_desc *desc, bool transitory)
 {
-	struct gpio_chip *chip;
+	struct gpio_chip *gc;
 	unsigned long packed;
 	int gpio;
 	int rc;
@@ -3331,14 +3497,14 @@ int gpiod_set_transitory(struct gpio_desc *desc, bool transitory)
 	assign_bit(FLAG_TRANSITORY, &desc->flags, transitory);
 
 	/* If the driver supports it, set the persistence state now */
-	chip = desc->gdev->chip;
-	if (!chip->set_config)
+	gc = desc->gdev->chip;
+	if (!gc->set_config)
 		return 0;
 
 	packed = pinconf_to_config_packed(PIN_CONFIG_PERSIST_STATE,
 					  !transitory);
 	gpio = gpio_chip_hwgpio(desc);
-	rc = gpio_do_set_config(chip, gpio, packed);
+	rc = gpio_do_set_config(gc, gpio, packed);
 	if (rc == -ENOTSUPP) {
 		dev_dbg(&desc->gdev->dev, "Persistence not supported for GPIO %d\n",
 				gpio);
@@ -3397,28 +3563,28 @@ EXPORT_SYMBOL_GPL(gpiod_toggle_active_low);
 
 static int gpiod_get_raw_value_commit(const struct gpio_desc *desc)
 {
-	struct gpio_chip	*chip;
+	struct gpio_chip	*gc;
 	int offset;
 	int value;
 
-	chip = desc->gdev->chip;
+	gc = desc->gdev->chip;
 	offset = gpio_chip_hwgpio(desc);
-	value = chip->get ? chip->get(chip, offset) : -EIO;
+	value = gc->get ? gc->get(gc, offset) : -EIO;
 	value = value < 0 ? value : !!value;
 	trace_gpio_value(desc_to_gpio(desc), 1, value);
 	return value;
 }
 
-static int gpio_chip_get_multiple(struct gpio_chip *chip,
+static int gpio_chip_get_multiple(struct gpio_chip *gc,
 				  unsigned long *mask, unsigned long *bits)
 {
-	if (chip->get_multiple) {
-		return chip->get_multiple(chip, mask, bits);
-	} else if (chip->get) {
+	if (gc->get_multiple) {
+		return gc->get_multiple(gc, mask, bits);
+	} else if (gc->get) {
 		int i, value;
 
-		for_each_set_bit(i, mask, chip->ngpio) {
-			value = chip->get(chip, i);
+		for_each_set_bit(i, mask, gc->ngpio) {
+			value = gc->get(gc, i);
 			if (value < 0)
 				return value;
 			__assign_bit(i, bits, value);
@@ -3466,26 +3632,26 @@ int gpiod_get_array_value_complex(bool raw, bool can_sleep,
 	}
 
 	while (i < array_size) {
-		struct gpio_chip *chip = desc_array[i]->gdev->chip;
+		struct gpio_chip *gc = desc_array[i]->gdev->chip;
 		unsigned long fastpath[2 * BITS_TO_LONGS(FASTPATH_NGPIO)];
 		unsigned long *mask, *bits;
 		int first, j, ret;
 
-		if (likely(chip->ngpio <= FASTPATH_NGPIO)) {
+		if (likely(gc->ngpio <= FASTPATH_NGPIO)) {
 			mask = fastpath;
 		} else {
-			mask = kmalloc_array(2 * BITS_TO_LONGS(chip->ngpio),
+			mask = kmalloc_array(2 * BITS_TO_LONGS(gc->ngpio),
 					   sizeof(*mask),
 					   can_sleep ? GFP_KERNEL : GFP_ATOMIC);
 			if (!mask)
 				return -ENOMEM;
 		}
 
-		bits = mask + BITS_TO_LONGS(chip->ngpio);
-		bitmap_zero(mask, chip->ngpio);
+		bits = mask + BITS_TO_LONGS(gc->ngpio);
+		bitmap_zero(mask, gc->ngpio);
 
 		if (!can_sleep)
-			WARN_ON(chip->can_sleep);
+			WARN_ON(gc->can_sleep);
 
 		/* collect all inputs belonging to the same chip */
 		first = i;
@@ -3500,9 +3666,9 @@ int gpiod_get_array_value_complex(bool raw, bool can_sleep,
 				i = find_next_zero_bit(array_info->get_mask,
 						       array_size, i);
 		} while ((i < array_size) &&
-			 (desc_array[i]->gdev->chip == chip));
+			 (desc_array[i]->gdev->chip == gc));
 
-		ret = gpio_chip_get_multiple(chip, mask, bits);
+		ret = gpio_chip_get_multiple(gc, mask, bits);
 		if (ret) {
 			if (mask != fastpath)
 				kfree(mask);
@@ -3640,13 +3806,13 @@ EXPORT_SYMBOL_GPL(gpiod_get_array_value);
 static void gpio_set_open_drain_value_commit(struct gpio_desc *desc, bool value)
 {
 	int ret = 0;
-	struct gpio_chip *chip = desc->gdev->chip;
+	struct gpio_chip *gc = desc->gdev->chip;
 	int offset = gpio_chip_hwgpio(desc);
 
 	if (value) {
-		ret = chip->direction_input(chip, offset);
+		ret = gc->direction_input(gc, offset);
 	} else {
-		ret = chip->direction_output(chip, offset, 0);
+		ret = gc->direction_output(gc, offset, 0);
 		if (!ret)
 			set_bit(FLAG_IS_OUT, &desc->flags);
 	}
@@ -3665,15 +3831,15 @@ static void gpio_set_open_drain_value_commit(struct gpio_desc *desc, bool value)
 static void gpio_set_open_source_value_commit(struct gpio_desc *desc, bool value)
 {
 	int ret = 0;
-	struct gpio_chip *chip = desc->gdev->chip;
+	struct gpio_chip *gc = desc->gdev->chip;
 	int offset = gpio_chip_hwgpio(desc);
 
 	if (value) {
-		ret = chip->direction_output(chip, offset, 1);
+		ret = gc->direction_output(gc, offset, 1);
 		if (!ret)
 			set_bit(FLAG_IS_OUT, &desc->flags);
 	} else {
-		ret = chip->direction_input(chip, offset);
+		ret = gc->direction_input(gc, offset);
 	}
 	trace_gpio_direction(desc_to_gpio(desc), !value, ret);
 	if (ret < 0)
@@ -3684,33 +3850,34 @@ static void gpio_set_open_source_value_commit(struct gpio_desc *desc, bool value
 
 static void gpiod_set_raw_value_commit(struct gpio_desc *desc, bool value)
 {
-	struct gpio_chip	*chip;
+	struct gpio_chip	*gc;
 
-	chip = desc->gdev->chip;
+	gc = desc->gdev->chip;
 	trace_gpio_value(desc_to_gpio(desc), 0, value);
-	chip->set(chip, gpio_chip_hwgpio(desc), value);
+	gc->set(gc, gpio_chip_hwgpio(desc), value);
 }
 
 /*
  * set multiple outputs on the same chip;
  * use the chip's set_multiple function if available;
  * otherwise set the outputs sequentially;
+ * @chip: the GPIO chip we operate on
  * @mask: bit mask array; one bit per output; BITS_PER_LONG bits per word
  *        defines which outputs are to be changed
  * @bits: bit value array; one bit per output; BITS_PER_LONG bits per word
  *        defines the values the outputs specified by mask are to be set to
  */
-static void gpio_chip_set_multiple(struct gpio_chip *chip,
+static void gpio_chip_set_multiple(struct gpio_chip *gc,
 				   unsigned long *mask, unsigned long *bits)
 {
-	if (chip->set_multiple) {
-		chip->set_multiple(chip, mask, bits);
+	if (gc->set_multiple) {
+		gc->set_multiple(gc, mask, bits);
 	} else {
 		unsigned int i;
 
 		/* set outputs if the corresponding mask bit is set */
-		for_each_set_bit(i, mask, chip->ngpio)
-			chip->set(chip, i, test_bit(i, bits));
+		for_each_set_bit(i, mask, gc->ngpio)
+			gc->set(gc, i, test_bit(i, bits));
 	}
 }
 
@@ -3749,26 +3916,26 @@ int gpiod_set_array_value_complex(bool raw, bool can_sleep,
 	}
 
 	while (i < array_size) {
-		struct gpio_chip *chip = desc_array[i]->gdev->chip;
+		struct gpio_chip *gc = desc_array[i]->gdev->chip;
 		unsigned long fastpath[2 * BITS_TO_LONGS(FASTPATH_NGPIO)];
 		unsigned long *mask, *bits;
 		int count = 0;
 
-		if (likely(chip->ngpio <= FASTPATH_NGPIO)) {
+		if (likely(gc->ngpio <= FASTPATH_NGPIO)) {
 			mask = fastpath;
 		} else {
-			mask = kmalloc_array(2 * BITS_TO_LONGS(chip->ngpio),
+			mask = kmalloc_array(2 * BITS_TO_LONGS(gc->ngpio),
 					   sizeof(*mask),
 					   can_sleep ? GFP_KERNEL : GFP_ATOMIC);
 			if (!mask)
 				return -ENOMEM;
 		}
 
-		bits = mask + BITS_TO_LONGS(chip->ngpio);
-		bitmap_zero(mask, chip->ngpio);
+		bits = mask + BITS_TO_LONGS(gc->ngpio);
+		bitmap_zero(mask, gc->ngpio);
 
 		if (!can_sleep)
-			WARN_ON(chip->can_sleep);
+			WARN_ON(gc->can_sleep);
 
 		do {
 			struct gpio_desc *desc = desc_array[i];
@@ -3804,10 +3971,10 @@ int gpiod_set_array_value_complex(bool raw, bool can_sleep,
 				i = find_next_zero_bit(array_info->set_mask,
 						       array_size, i);
 		} while ((i < array_size) &&
-			 (desc_array[i]->gdev->chip == chip));
+			 (desc_array[i]->gdev->chip == gc));
 		/* push collected bits to outputs */
 		if (count != 0)
-			gpio_chip_set_multiple(chip, mask, bits);
+			gpio_chip_set_multiple(gc, mask, bits);
 
 		if (mask != fastpath)
 			kfree(mask);
@@ -3969,7 +4136,7 @@ EXPORT_SYMBOL_GPL(gpiod_set_consumer_name);
  */
 int gpiod_to_irq(const struct gpio_desc *desc)
 {
-	struct gpio_chip *chip;
+	struct gpio_chip *gc;
 	int offset;
 
 	/*
@@ -3980,10 +4147,10 @@ int gpiod_to_irq(const struct gpio_desc *desc)
 	if (!desc || IS_ERR(desc) || !desc->gdev || !desc->gdev->chip)
 		return -EINVAL;
 
-	chip = desc->gdev->chip;
+	gc = desc->gdev->chip;
 	offset = gpio_chip_hwgpio(desc);
-	if (chip->to_irq) {
-		int retirq = chip->to_irq(chip, offset);
+	if (gc->to_irq) {
+		int retirq = gc->to_irq(gc, offset);
 
 		/* Zero means NO_IRQ */
 		if (!retirq)
@@ -3997,17 +4164,17 @@ EXPORT_SYMBOL_GPL(gpiod_to_irq);
 
 /**
  * gpiochip_lock_as_irq() - lock a GPIO to be used as IRQ
- * @chip: the chip the GPIO to lock belongs to
+ * @gc: the chip the GPIO to lock belongs to
  * @offset: the offset of the GPIO to lock as IRQ
  *
  * This is used directly by GPIO drivers that want to lock down
  * a certain GPIO line to be used for IRQs.
  */
-int gpiochip_lock_as_irq(struct gpio_chip *chip, unsigned int offset)
+int gpiochip_lock_as_irq(struct gpio_chip *gc, unsigned int offset)
 {
 	struct gpio_desc *desc;
 
-	desc = gpiochip_get_desc(chip, offset);
+	desc = gpiochip_get_desc(gc, offset);
 	if (IS_ERR(desc))
 		return PTR_ERR(desc);
 
@@ -4015,18 +4182,18 @@ int gpiochip_lock_as_irq(struct gpio_chip *chip, unsigned int offset)
 	 * If it's fast: flush the direction setting if something changed
 	 * behind our back
 	 */
-	if (!chip->can_sleep && chip->get_direction) {
+	if (!gc->can_sleep && gc->get_direction) {
 		int dir = gpiod_get_direction(desc);
 
 		if (dir < 0) {
-			chip_err(chip, "%s: cannot get GPIO direction\n",
+			chip_err(gc, "%s: cannot get GPIO direction\n",
 				 __func__);
 			return dir;
 		}
 	}
 
 	if (test_bit(FLAG_IS_OUT, &desc->flags)) {
-		chip_err(chip,
+		chip_err(gc,
 			 "%s: tried to flag a GPIO set as output for IRQ\n",
 			 __func__);
 		return -EIO;
@@ -4049,17 +4216,17 @@ EXPORT_SYMBOL_GPL(gpiochip_lock_as_irq);
 
 /**
  * gpiochip_unlock_as_irq() - unlock a GPIO used as IRQ
- * @chip: the chip the GPIO to lock belongs to
+ * @gc: the chip the GPIO to lock belongs to
  * @offset: the offset of the GPIO to lock as IRQ
  *
  * This is used directly by GPIO drivers that want to indicate
  * that a certain GPIO is no longer used exclusively for IRQ.
  */
-void gpiochip_unlock_as_irq(struct gpio_chip *chip, unsigned int offset)
+void gpiochip_unlock_as_irq(struct gpio_chip *gc, unsigned int offset)
 {
 	struct gpio_desc *desc;
 
-	desc = gpiochip_get_desc(chip, offset);
+	desc = gpiochip_get_desc(gc, offset);
 	if (IS_ERR(desc))
 		return;
 
@@ -4072,9 +4239,9 @@ void gpiochip_unlock_as_irq(struct gpio_chip *chip, unsigned int offset)
 }
 EXPORT_SYMBOL_GPL(gpiochip_unlock_as_irq);
 
-void gpiochip_disable_irq(struct gpio_chip *chip, unsigned int offset)
+void gpiochip_disable_irq(struct gpio_chip *gc, unsigned int offset)
 {
-	struct gpio_desc *desc = gpiochip_get_desc(chip, offset);
+	struct gpio_desc *desc = gpiochip_get_desc(gc, offset);
 
 	if (!IS_ERR(desc) &&
 	    !WARN_ON(!test_bit(FLAG_USED_AS_IRQ, &desc->flags)))
@@ -4082,9 +4249,9 @@ void gpiochip_disable_irq(struct gpio_chip *chip, unsigned int offset)
 }
 EXPORT_SYMBOL_GPL(gpiochip_disable_irq);
 
-void gpiochip_enable_irq(struct gpio_chip *chip, unsigned int offset)
+void gpiochip_enable_irq(struct gpio_chip *gc, unsigned int offset)
 {
-	struct gpio_desc *desc = gpiochip_get_desc(chip, offset);
+	struct gpio_desc *desc = gpiochip_get_desc(gc, offset);
 
 	if (!IS_ERR(desc) &&
 	    !WARN_ON(!test_bit(FLAG_USED_AS_IRQ, &desc->flags))) {
@@ -4094,63 +4261,63 @@ void gpiochip_enable_irq(struct gpio_chip *chip, unsigned int offset)
 }
 EXPORT_SYMBOL_GPL(gpiochip_enable_irq);
 
-bool gpiochip_line_is_irq(struct gpio_chip *chip, unsigned int offset)
+bool gpiochip_line_is_irq(struct gpio_chip *gc, unsigned int offset)
 {
-	if (offset >= chip->ngpio)
+	if (offset >= gc->ngpio)
 		return false;
 
-	return test_bit(FLAG_USED_AS_IRQ, &chip->gpiodev->descs[offset].flags);
+	return test_bit(FLAG_USED_AS_IRQ, &gc->gpiodev->descs[offset].flags);
 }
 EXPORT_SYMBOL_GPL(gpiochip_line_is_irq);
 
-int gpiochip_reqres_irq(struct gpio_chip *chip, unsigned int offset)
+int gpiochip_reqres_irq(struct gpio_chip *gc, unsigned int offset)
 {
 	int ret;
 
-	if (!try_module_get(chip->gpiodev->owner))
+	if (!try_module_get(gc->gpiodev->owner))
 		return -ENODEV;
 
-	ret = gpiochip_lock_as_irq(chip, offset);
+	ret = gpiochip_lock_as_irq(gc, offset);
 	if (ret) {
-		chip_err(chip, "unable to lock HW IRQ %u for IRQ\n", offset);
-		module_put(chip->gpiodev->owner);
+		chip_err(gc, "unable to lock HW IRQ %u for IRQ\n", offset);
+		module_put(gc->gpiodev->owner);
 		return ret;
 	}
 	return 0;
 }
 EXPORT_SYMBOL_GPL(gpiochip_reqres_irq);
 
-void gpiochip_relres_irq(struct gpio_chip *chip, unsigned int offset)
+void gpiochip_relres_irq(struct gpio_chip *gc, unsigned int offset)
 {
-	gpiochip_unlock_as_irq(chip, offset);
-	module_put(chip->gpiodev->owner);
+	gpiochip_unlock_as_irq(gc, offset);
+	module_put(gc->gpiodev->owner);
 }
 EXPORT_SYMBOL_GPL(gpiochip_relres_irq);
 
-bool gpiochip_line_is_open_drain(struct gpio_chip *chip, unsigned int offset)
+bool gpiochip_line_is_open_drain(struct gpio_chip *gc, unsigned int offset)
 {
-	if (offset >= chip->ngpio)
+	if (offset >= gc->ngpio)
 		return false;
 
-	return test_bit(FLAG_OPEN_DRAIN, &chip->gpiodev->descs[offset].flags);
+	return test_bit(FLAG_OPEN_DRAIN, &gc->gpiodev->descs[offset].flags);
 }
 EXPORT_SYMBOL_GPL(gpiochip_line_is_open_drain);
 
-bool gpiochip_line_is_open_source(struct gpio_chip *chip, unsigned int offset)
+bool gpiochip_line_is_open_source(struct gpio_chip *gc, unsigned int offset)
 {
-	if (offset >= chip->ngpio)
+	if (offset >= gc->ngpio)
 		return false;
 
-	return test_bit(FLAG_OPEN_SOURCE, &chip->gpiodev->descs[offset].flags);
+	return test_bit(FLAG_OPEN_SOURCE, &gc->gpiodev->descs[offset].flags);
 }
 EXPORT_SYMBOL_GPL(gpiochip_line_is_open_source);
 
-bool gpiochip_line_is_persistent(struct gpio_chip *chip, unsigned int offset)
+bool gpiochip_line_is_persistent(struct gpio_chip *gc, unsigned int offset)
 {
-	if (offset >= chip->ngpio)
+	if (offset >= gc->ngpio)
 		return false;
 
-	return !test_bit(FLAG_TRANSITORY, &chip->gpiodev->descs[offset].flags);
+	return !test_bit(FLAG_TRANSITORY, &gc->gpiodev->descs[offset].flags);
 }
 EXPORT_SYMBOL_GPL(gpiochip_line_is_persistent);
 
@@ -4388,7 +4555,7 @@ EXPORT_SYMBOL_GPL(gpiod_remove_lookup_table);
  */
 void gpiod_add_hogs(struct gpiod_hog *hogs)
 {
-	struct gpio_chip *chip;
+	struct gpio_chip *gc;
 	struct gpiod_hog *hog;
 
 	mutex_lock(&gpio_machine_hogs_mutex);
@@ -4400,9 +4567,9 @@ void gpiod_add_hogs(struct gpiod_hog *hogs)
 		 * The chip may have been registered earlier, so check if it
 		 * exists and, if so, try to hog the line now.
 		 */
-		chip = find_chip_by_name(hog->chip_label);
-		if (chip)
-			gpiochip_machine_hog(chip, hog);
+		gc = find_chip_by_name(hog->chip_label);
+		if (gc)
+			gpiochip_machine_hog(gc, hog);
 	}
 
 	mutex_unlock(&gpio_machine_hogs_mutex);
@@ -4452,7 +4619,7 @@ static struct gpio_desc *gpiod_find(struct device *dev, const char *con_id,
 		return desc;
 
 	for (p = &table->table[0]; p->chip_label; p++) {
-		struct gpio_chip *chip;
+		struct gpio_chip *gc;
 
 		/* idx must always match exactly */
 		if (p->idx != idx)
@@ -4462,9 +4629,9 @@ static struct gpio_desc *gpiod_find(struct device *dev, const char *con_id,
 		if (p->con_id && (!con_id || strcmp(p->con_id, con_id)))
 			continue;
 
-		chip = find_chip_by_name(p->chip_label);
+		gc = find_chip_by_name(p->chip_label);
 
-		if (!chip) {
+		if (!gc) {
 			/*
 			 * As the lookup table indicates a chip with
 			 * p->chip_label should exist, assume it may
@@ -4477,15 +4644,15 @@ static struct gpio_desc *gpiod_find(struct device *dev, const char *con_id,
 			return ERR_PTR(-EPROBE_DEFER);
 		}
 
-		if (chip->ngpio <= p->chip_hwnum) {
+		if (gc->ngpio <= p->chip_hwnum) {
 			dev_err(dev,
 				"requested GPIO %u (%u) is out of range [0..%u] for chip %s\n",
-				idx, p->chip_hwnum, chip->ngpio - 1,
-				chip->label);
+				idx, p->chip_hwnum, gc->ngpio - 1,
+				gc->label);
 			return ERR_PTR(-EINVAL);
 		}
 
-		desc = gpiochip_get_desc(chip, p->chip_hwnum);
+		desc = gpiochip_get_desc(gc, p->chip_hwnum);
 		*flags = p->flags;
 
 		return desc;
@@ -4880,20 +5047,20 @@ EXPORT_SYMBOL_GPL(gpiod_get_index_optional);
 int gpiod_hog(struct gpio_desc *desc, const char *name,
 	      unsigned long lflags, enum gpiod_flags dflags)
 {
-	struct gpio_chip *chip;
+	struct gpio_chip *gc;
 	struct gpio_desc *local_desc;
 	int hwnum;
 	int ret;
 
-	chip = gpiod_to_chip(desc);
+	gc = gpiod_to_chip(desc);
 	hwnum = gpio_chip_hwgpio(desc);
 
-	local_desc = gpiochip_request_own_desc(chip, hwnum, name,
+	local_desc = gpiochip_request_own_desc(gc, hwnum, name,
 					       lflags, dflags);
 	if (IS_ERR(local_desc)) {
 		ret = PTR_ERR(local_desc);
 		pr_err("requesting hog GPIO %s (chip %s, offset %d) failed, %d\n",
-		       name, chip->label, hwnum, ret);
+		       name, gc->label, hwnum, ret);
 		return ret;
 	}
 
@@ -4911,15 +5078,15 @@ int gpiod_hog(struct gpio_desc *desc, const char *name,
 
 /**
  * gpiochip_free_hogs - Scan gpio-controller chip and release GPIO hog
- * @chip:	gpio chip to act on
+ * @gc:	gpio chip to act on
  */
-static void gpiochip_free_hogs(struct gpio_chip *chip)
+static void gpiochip_free_hogs(struct gpio_chip *gc)
 {
 	int id;
 
-	for (id = 0; id < chip->ngpio; id++) {
-		if (test_bit(FLAG_IS_HOGGED, &chip->gpiodev->descs[id].flags))
-			gpiochip_free_own_desc(&chip->gpiodev->descs[id]);
+	for (id = 0; id < gc->ngpio; id++) {
+		if (test_bit(FLAG_IS_HOGGED, &gc->gpiodev->descs[id].flags))
+			gpiochip_free_own_desc(&gc->gpiodev->descs[id]);
 	}
 }
 
@@ -4942,7 +5109,7 @@ struct gpio_descs *__must_check gpiod_get_array(struct device *dev,
 	struct gpio_desc *desc;
 	struct gpio_descs *descs;
 	struct gpio_array *array_info = NULL;
-	struct gpio_chip *chip;
+	struct gpio_chip *gc;
 	int count, bitmap_size;
 
 	count = gpiod_count(dev, con_id);
@@ -4962,7 +5129,7 @@ struct gpio_descs *__must_check gpiod_get_array(struct device *dev,
 
 		descs->desc[descs->ndescs] = desc;
 
-		chip = gpiod_to_chip(desc);
+		gc = gpiod_to_chip(desc);
 		/*
 		 * If pin hardware number of array member 0 is also 0, select
 		 * its chip as a candidate for fast bitmap processing path.
@@ -4970,8 +5137,8 @@ struct gpio_descs *__must_check gpiod_get_array(struct device *dev,
 		if (descs->ndescs == 0 && gpio_chip_hwgpio(desc) == 0) {
 			struct gpio_descs *array;
 
-			bitmap_size = BITS_TO_LONGS(chip->ngpio > count ?
-						    chip->ngpio : count);
+			bitmap_size = BITS_TO_LONGS(gc->ngpio > count ?
+						    gc->ngpio : count);
 
 			array = kzalloc(struct_size(descs, desc, count) +
 					struct_size(array_info, invert_mask,
@@ -4994,7 +5161,7 @@ struct gpio_descs *__must_check gpiod_get_array(struct device *dev,
 
 			array_info->desc = descs->desc;
 			array_info->size = count;
-			array_info->chip = chip;
+			array_info->chip = gc;
 			bitmap_set(array_info->get_mask, descs->ndescs,
 				   count - descs->ndescs);
 			bitmap_set(array_info->set_mask, descs->ndescs,
@@ -5002,7 +5169,7 @@ struct gpio_descs *__must_check gpiod_get_array(struct device *dev,
 			descs->info = array_info;
 		}
 		/* Unmark array members which don't belong to the 'fast' chip */
-		if (array_info && array_info->chip != chip) {
+		if (array_info && array_info->chip != gc) {
 			__clear_bit(descs->ndescs, array_info->get_mask);
 			__clear_bit(descs->ndescs, array_info->set_mask);
 		}
@@ -5027,8 +5194,8 @@ struct gpio_descs *__must_check gpiod_get_array(struct device *dev,
 			}
 		} else if (array_info) {
 			/* Exclude open drain or open source from fast output */
-			if (gpiochip_line_is_open_drain(chip, descs->ndescs) ||
-			    gpiochip_line_is_open_source(chip, descs->ndescs))
+			if (gpiochip_line_is_open_drain(gc, descs->ndescs) ||
+			    gpiochip_line_is_open_source(gc, descs->ndescs))
 				__clear_bit(descs->ndescs,
 					    array_info->set_mask);
 			/* Identify 'fast' pins which require invertion */
@@ -5116,10 +5283,15 @@ static int __init gpiolib_dev_init(void)
 	if (ret < 0) {
 		pr_err("gpiolib: failed to allocate char dev region\n");
 		bus_unregister(&gpio_bus_type);
-	} else {
-		gpiolib_initialized = true;
-		gpiochip_setup_devs();
+		return ret;
 	}
+
+	gpiolib_initialized = true;
+	gpiochip_setup_devs();
+
+	if (IS_ENABLED(CONFIG_OF_DYNAMIC))
+		WARN_ON(of_reconfig_notifier_register(&gpio_of_notifier));
+
 	return ret;
 }
 core_initcall(gpiolib_dev_init);
@@ -5129,7 +5301,7 @@ core_initcall(gpiolib_dev_init);
 static void gpiolib_dbg_show(struct seq_file *s, struct gpio_device *gdev)
 {
 	unsigned		i;
-	struct gpio_chip	*chip = gdev->chip;
+	struct gpio_chip	*gc = gdev->chip;
 	unsigned		gpio = gdev->base;
 	struct gpio_desc	*gdesc = &gdev->descs[0];
 	bool			is_out;
@@ -5152,7 +5324,7 @@ static void gpiolib_dbg_show(struct seq_file *s, struct gpio_device *gdev)
 		seq_printf(s, " gpio-%-3d (%-20.20s|%-20.20s) %s %s %s%s",
 			gpio, gdesc->name ? gdesc->name : "", gdesc->label,
 			is_out ? "out" : "in ",
-			chip->get ? (chip->get(chip, i) ? "hi" : "lo") : "?  ",
+			gc->get ? (gc->get(gc, i) ? "hi" : "lo") : "?  ",
 			is_irq ? "IRQ " : "",
 			active_low ? "ACTIVE LOW" : "");
 		seq_printf(s, "\n");
@@ -5204,10 +5376,10 @@ static void gpiolib_seq_stop(struct seq_file *s, void *v)
 static int gpiolib_seq_show(struct seq_file *s, void *v)
 {
 	struct gpio_device *gdev = v;
-	struct gpio_chip *chip = gdev->chip;
+	struct gpio_chip *gc = gdev->chip;
 	struct device *parent;
 
-	if (!chip) {
+	if (!gc) {
 		seq_printf(s, "%s%s: (dangling chip)", (char *)s->private,
 			   dev_name(&gdev->dev));
 		return 0;
@@ -5216,19 +5388,19 @@ static int gpiolib_seq_show(struct seq_file *s, void *v)
 	seq_printf(s, "%s%s: GPIOs %d-%d", (char *)s->private,
 		   dev_name(&gdev->dev),
 		   gdev->base, gdev->base + gdev->ngpio - 1);
-	parent = chip->parent;
+	parent = gc->parent;
 	if (parent)
 		seq_printf(s, ", parent: %s/%s",
 			   parent->bus ? parent->bus->name : "no-bus",
 			   dev_name(parent));
-	if (chip->label)
-		seq_printf(s, ", %s", chip->label);
-	if (chip->can_sleep)
+	if (gc->label)
+		seq_printf(s, ", %s", gc->label);
+	if (gc->can_sleep)
 		seq_printf(s, ", can sleep");
 	seq_printf(s, ":\n");
 
-	if (chip->dbg_show)
-		chip->dbg_show(s, chip);
+	if (gc->dbg_show)
+		gc->dbg_show(s, gc);
 	else
 		gpiolib_dbg_show(s, gdev);
 
diff --git a/drivers/gpio/gpiolib.h b/drivers/gpio/gpiolib.h
index 3e0aab2..853ce68 100644
--- a/drivers/gpio/gpiolib.h
+++ b/drivers/gpio/gpiolib.h
@@ -56,6 +56,7 @@ struct gpio_device {
 	const char		*label;
 	void			*data;
 	struct list_head        list;
+	struct atomic_notifier_head notifier;
 
 #ifdef CONFIG_PINCTRL
 	/*
@@ -119,6 +120,9 @@ struct gpio_desc {
 	const char		*label;
 	/* Name of the GPIO */
 	const char		*name;
+#ifdef CONFIG_OF_DYNAMIC
+	struct device_node	*hog;
+#endif
 };
 
 int gpiod_request(struct gpio_desc *desc, const char *label);
diff --git a/drivers/gpu/Makefile b/drivers/gpu/Makefile
index f17d01f..835c883 100644
--- a/drivers/gpu/Makefile
+++ b/drivers/gpu/Makefile
@@ -5,3 +5,4 @@
 obj-$(CONFIG_TEGRA_HOST1X)	+= host1x/
 obj-y			+= drm/ vga/
 obj-$(CONFIG_IMX_IPUV3_CORE)	+= ipu-v3/
+obj-$(CONFIG_TRACE_GPU_MEM)		+= trace/
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_bios.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_bios.c
index 50dff69..b1172d9 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_bios.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_bios.c
@@ -192,30 +192,35 @@ static bool amdgpu_read_bios_from_rom(struct amdgpu_device *adev)
 
 static bool amdgpu_read_platform_bios(struct amdgpu_device *adev)
 {
-	uint8_t __iomem *bios;
-	size_t size;
+	phys_addr_t rom = adev->pdev->rom;
+	size_t romlen = adev->pdev->romlen;
+	void __iomem *bios;
 
 	adev->bios = NULL;
 
-	bios = pci_platform_rom(adev->pdev, &size);
-	if (!bios) {
-		return false;
-	}
-
-	adev->bios = kzalloc(size, GFP_KERNEL);
-	if (adev->bios == NULL)
+	if (!rom || romlen == 0)
 		return false;
 
-	memcpy_fromio(adev->bios, bios, size);
-
-	if (!check_atom_bios(adev->bios, size)) {
-		kfree(adev->bios);
+	adev->bios = kzalloc(romlen, GFP_KERNEL);
+	if (!adev->bios)
 		return false;
-	}
 
-	adev->bios_size = size;
+	bios = ioremap(rom, romlen);
+	if (!bios)
+		goto free_bios;
+
+	memcpy_fromio(adev->bios, bios, romlen);
+	iounmap(bios);
+
+	if (!check_atom_bios(adev->bios, romlen))
+		goto free_bios;
+
+	adev->bios_size = romlen;
 
 	return true;
+free_bios:
+	kfree(adev->bios);
+	return false;
 }
 
 #ifdef CONFIG_ACPI
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
index faa3e71..f84f9e3 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
@@ -2008,8 +2008,24 @@ static void amdgpu_device_fill_reset_magic(struct amdgpu_device *adev)
  */
 static bool amdgpu_device_check_vram_lost(struct amdgpu_device *adev)
 {
-	return !!memcmp(adev->gart.ptr, adev->reset_magic,
-			AMDGPU_RESET_MAGIC_NUM);
+	if (memcmp(adev->gart.ptr, adev->reset_magic,
+			AMDGPU_RESET_MAGIC_NUM))
+		return true;
+
+	if (!adev->in_gpu_reset)
+		return false;
+
+	/*
+	 * For all ASICs with baco/mode1 reset, the VRAM is
+	 * always assumed to be lost.
+	 */
+	switch (amdgpu_asic_reset_method(adev)) {
+	case AMD_RESET_METHOD_BACO:
+	case AMD_RESET_METHOD_MODE1:
+		return true;
+	default:
+		return false;
+	}
 }
 
 /**
@@ -3356,6 +3372,9 @@ int amdgpu_device_suspend(struct drm_device *dev, bool fbcon)
 		}
 	}
 
+	amdgpu_device_set_pg_state(adev, AMD_PG_STATE_UNGATE);
+	amdgpu_device_set_cg_state(adev, AMD_CG_STATE_UNGATE);
+
 	amdgpu_amdkfd_suspend(adev, !fbcon);
 
 	amdgpu_ras_suspend(adev);
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
index f197f1b..abe94a5 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
@@ -89,7 +89,8 @@ void amdgpu_pm_acpi_event_handler(struct amdgpu_device *adev)
 			adev->pm.ac_power = true;
 		else
 			adev->pm.ac_power = false;
-		if (adev->powerplay.pp_funcs->enable_bapm)
+		if (adev->powerplay.pp_funcs &&
+		    adev->powerplay.pp_funcs->enable_bapm)
 			amdgpu_dpm_enable_bapm(adev, adev->pm.ac_power);
 		mutex_unlock(&adev->pm.mutex);
 
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c
index be50867..deaa268 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c
@@ -818,7 +818,7 @@ static int psp_ras_initialize(struct psp_context *psp)
 
 	if (!psp->adev->psp.ta_ras_ucode_size ||
 	    !psp->adev->psp.ta_ras_start_addr) {
-		dev_warn(psp->adev->dev, "RAS: ras ta ucode is not available\n");
+		dev_info(psp->adev->dev, "RAS: optional ras ta ucode is not available\n");
 		return 0;
 	}
 
@@ -902,7 +902,7 @@ static int psp_hdcp_initialize(struct psp_context *psp)
 
 	if (!psp->adev->psp.ta_hdcp_ucode_size ||
 	    !psp->adev->psp.ta_hdcp_start_addr) {
-		dev_warn(psp->adev->dev, "HDCP: hdcp ta ucode is not available\n");
+		dev_info(psp->adev->dev, "HDCP: optional hdcp ta ucode is not available\n");
 		return 0;
 	}
 
@@ -1048,7 +1048,7 @@ static int psp_dtm_initialize(struct psp_context *psp)
 
 	if (!psp->adev->psp.ta_dtm_ucode_size ||
 	    !psp->adev->psp.ta_dtm_start_addr) {
-		dev_warn(psp->adev->dev, "DTM: dtm ta ucode is not available\n");
+		dev_info(psp->adev->dev, "DTM: optional dtm ta ucode is not available\n");
 		return 0;
 	}
 
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c
index 3c32a94..ab379b4 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c
@@ -1424,12 +1424,22 @@ static void amdgpu_ras_do_recovery(struct work_struct *work)
 {
 	struct amdgpu_ras *ras =
 		container_of(work, struct amdgpu_ras, recovery_work);
+	struct amdgpu_device *remote_adev = NULL;
+	struct amdgpu_device *adev = ras->adev;
+	struct list_head device_list, *device_list_handle =  NULL;
+	struct amdgpu_hive_info *hive = amdgpu_get_xgmi_hive(adev, false);
 
-	/*
-	 * Query and print non zero error counter per IP block for
-	 * awareness before recovering GPU.
-	 */
-	amdgpu_ras_log_on_err_counter(ras->adev);
+	/* Build list of devices to query RAS related errors */
+	if  (hive && adev->gmc.xgmi.num_physical_nodes > 1) {
+		device_list_handle = &hive->device_list;
+	} else {
+		list_add_tail(&adev->gmc.xgmi.head, &device_list);
+		device_list_handle = &device_list;
+	}
+
+	list_for_each_entry(remote_adev, device_list_handle, gmc.xgmi.head) {
+		amdgpu_ras_log_on_err_counter(remote_adev);
+	}
 
 	if (amdgpu_device_should_recover_gpu(ras->adev))
 		amdgpu_device_gpu_recover(ras->adev, 0);
diff --git a/drivers/gpu/drm/amd/amdgpu/cik.c b/drivers/gpu/drm/amd/amdgpu/cik.c
index 006f21e..62635e5 100644
--- a/drivers/gpu/drm/amd/amdgpu/cik.c
+++ b/drivers/gpu/drm/amd/amdgpu/cik.c
@@ -1358,8 +1358,6 @@ static int cik_asic_reset(struct amdgpu_device *adev)
 	int r;
 
 	if (cik_asic_reset_method(adev) == AMD_RESET_METHOD_BACO) {
-		if (!adev->in_suspend)
-			amdgpu_inc_vram_lost(adev);
 		r = amdgpu_dpm_baco_reset(adev);
 	} else {
 		r = cik_asic_pci_config_reset(adev);
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
index c8f2aa1..f92c158 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
@@ -1113,7 +1113,7 @@ static int gfx_v10_0_mec_init(struct amdgpu_device *adev)
 		return r;
 	}
 
-	memset(hpd, 0, adev->gfx.mec.hpd_eop_obj->tbo.mem.size);
+	memset(hpd, 0, mec_hpd_size);
 
 	amdgpu_bo_kunmap(adev->gfx.mec.hpd_eop_obj);
 	amdgpu_bo_unreserve(adev->gfx.mec.hpd_eop_obj);
@@ -4104,6 +4104,12 @@ static void gfx_v10_0_update_medium_grain_clock_gating(struct amdgpu_device *ade
 
 	/* It is disabled by HW by default */
 	if (enable && (adev->cg_flags & AMD_CG_SUPPORT_GFX_MGCG)) {
+		/* 0 - Disable some blocks' MGCG */
+		WREG32_SOC15(GC, 0, mmGRBM_GFX_INDEX, 0xe0000000);
+		WREG32_SOC15(GC, 0, mmCGTT_WD_CLK_CTRL, 0xff000000);
+		WREG32_SOC15(GC, 0, mmCGTT_VGT_CLK_CTRL, 0xff000000);
+		WREG32_SOC15(GC, 0, mmCGTT_IA_CLK_CTRL, 0xff000000);
+
 		/* 1 - RLC_CGTT_MGCG_OVERRIDE */
 		def = data = RREG32_SOC15(GC, 0, mmRLC_CGTT_MGCG_OVERRIDE);
 		data &= ~(RLC_CGTT_MGCG_OVERRIDE__GRBM_CGTT_SCLK_OVERRIDE_MASK |
@@ -4143,19 +4149,20 @@ static void gfx_v10_0_update_medium_grain_clock_gating(struct amdgpu_device *ade
 		if (def != data)
 			WREG32_SOC15(GC, 0, mmRLC_CGTT_MGCG_OVERRIDE, data);
 
-		/* 2 - disable MGLS in RLC */
+		/* 2 - disable MGLS in CP */
+		data = RREG32_SOC15(GC, 0, mmCP_MEM_SLP_CNTL);
+		if (data & CP_MEM_SLP_CNTL__CP_MEM_LS_EN_MASK) {
+			data &= ~CP_MEM_SLP_CNTL__CP_MEM_LS_EN_MASK;
+			WREG32_SOC15(GC, 0, mmCP_MEM_SLP_CNTL, data);
+		}
+
+		/* 3 - disable MGLS in RLC */
 		data = RREG32_SOC15(GC, 0, mmRLC_MEM_SLP_CNTL);
 		if (data & RLC_MEM_SLP_CNTL__RLC_MEM_LS_EN_MASK) {
 			data &= ~RLC_MEM_SLP_CNTL__RLC_MEM_LS_EN_MASK;
 			WREG32_SOC15(GC, 0, mmRLC_MEM_SLP_CNTL, data);
 		}
 
-		/* 3 - disable MGLS in CP */
-		data = RREG32_SOC15(GC, 0, mmCP_MEM_SLP_CNTL);
-		if (data & CP_MEM_SLP_CNTL__CP_MEM_LS_EN_MASK) {
-			data &= ~CP_MEM_SLP_CNTL__CP_MEM_LS_EN_MASK;
-			WREG32_SOC15(GC, 0, mmCP_MEM_SLP_CNTL, data);
-		}
 	}
 }
 
@@ -4266,7 +4273,7 @@ static int gfx_v10_0_update_gfx_clock_gating(struct amdgpu_device *adev,
 		/* ===  CGCG /CGLS for GFX 3D Only === */
 		gfx_v10_0_update_3d_clock_gating(adev, enable);
 		/* ===  MGCG + MGLS === */
-		gfx_v10_0_update_medium_grain_clock_gating(adev, enable);
+		/* gfx_v10_0_update_medium_grain_clock_gating(adev, enable); */
 	}
 
 	if (adev->cg_flags &
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
index 37c8231..0c39048 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
@@ -1217,6 +1217,8 @@ static void gfx_v9_0_check_fw_write_wait(struct amdgpu_device *adev)
 			adev->gfx.mec_fw_write_wait = true;
 		break;
 	default:
+		adev->gfx.me_fw_write_wait = true;
+		adev->gfx.mec_fw_write_wait = true;
 		break;
 	}
 }
@@ -1232,6 +1234,8 @@ struct amdgpu_gfxoff_quirk {
 static const struct amdgpu_gfxoff_quirk amdgpu_gfxoff_quirk_list[] = {
 	/* https://bugzilla.kernel.org/show_bug.cgi?id=204689 */
 	{ 0x1002, 0x15dd, 0x1002, 0x15dd, 0xc8 },
+	/* https://bugzilla.kernel.org/show_bug.cgi?id=207171 */
+	{ 0x1002, 0x15dd, 0x103c, 0x83e7, 0xd3 },
 	{ 0, 0, 0, 0, 0 },
 };
 
@@ -1946,7 +1950,7 @@ static int gfx_v9_0_mec_init(struct amdgpu_device *adev)
 		return r;
 	}
 
-	memset(hpd, 0, adev->gfx.mec.hpd_eop_obj->tbo.mem.size);
+	memset(hpd, 0, mec_hpd_size);
 
 	amdgpu_bo_kunmap(adev->gfx.mec.hpd_eop_obj);
 	amdgpu_bo_unreserve(adev->gfx.mec.hpd_eop_obj);
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_4.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_4.c
index cceb46f..dce945e 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_4.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_4.c
@@ -710,14 +710,16 @@ static int gfx_v9_4_query_utc_edc_status(struct amdgpu_device *adev,
 
 		sec_count = REG_GET_FIELD(data, VML2_MEM_ECC_CNTL, SEC_COUNT);
 		if (sec_count) {
-			DRM_INFO("Instance[%d]: SubBlock %s, SEC %d\n", i,
+			dev_info(adev->dev,
+				 "Instance[%d]: SubBlock %s, SEC %d\n", i,
 				 vml2_mems[i], sec_count);
 			err_data->ce_count += sec_count;
 		}
 
 		ded_count = REG_GET_FIELD(data, VML2_MEM_ECC_CNTL, DED_COUNT);
 		if (ded_count) {
-			DRM_INFO("Instance[%d]: SubBlock %s, DED %d\n", i,
+			dev_info(adev->dev,
+				 "Instance[%d]: SubBlock %s, DED %d\n", i,
 				 vml2_mems[i], ded_count);
 			err_data->ue_count += ded_count;
 		}
diff --git a/drivers/gpu/drm/amd/amdgpu/mmhub_v9_4.c b/drivers/gpu/drm/amd/amdgpu/mmhub_v9_4.c
index 0d413fa..c0e3efc 100644
--- a/drivers/gpu/drm/amd/amdgpu/mmhub_v9_4.c
+++ b/drivers/gpu/drm/amd/amdgpu/mmhub_v9_4.c
@@ -1539,8 +1539,11 @@ static const struct soc15_reg_entry mmhub_v9_4_edc_cnt_regs[] = {
 	{ SOC15_REG_ENTRY(MMHUB, 0, mmMMEA7_EDC_CNT3), 0, 0, 0 },
 };
 
-static int mmhub_v9_4_get_ras_error_count(const struct soc15_reg_entry *reg,
-	uint32_t value, uint32_t *sec_count, uint32_t *ded_count)
+static int mmhub_v9_4_get_ras_error_count(struct amdgpu_device *adev,
+					  const struct soc15_reg_entry *reg,
+					  uint32_t value,
+					  uint32_t *sec_count,
+					  uint32_t *ded_count)
 {
 	uint32_t i;
 	uint32_t sec_cnt, ded_cnt;
@@ -1553,7 +1556,7 @@ static int mmhub_v9_4_get_ras_error_count(const struct soc15_reg_entry *reg,
 				mmhub_v9_4_ras_fields[i].sec_count_mask) >>
 				mmhub_v9_4_ras_fields[i].sec_count_shift;
 		if (sec_cnt) {
-			DRM_INFO("MMHUB SubBlock %s, SEC %d\n",
+			dev_info(adev->dev, "MMHUB SubBlock %s, SEC %d\n",
 				mmhub_v9_4_ras_fields[i].name,
 				sec_cnt);
 			*sec_count += sec_cnt;
@@ -1563,7 +1566,7 @@ static int mmhub_v9_4_get_ras_error_count(const struct soc15_reg_entry *reg,
 				mmhub_v9_4_ras_fields[i].ded_count_mask) >>
 				mmhub_v9_4_ras_fields[i].ded_count_shift;
 		if (ded_cnt) {
-			DRM_INFO("MMHUB SubBlock %s, DED %d\n",
+			dev_info(adev->dev, "MMHUB SubBlock %s, DED %d\n",
 				mmhub_v9_4_ras_fields[i].name,
 				ded_cnt);
 			*ded_count += ded_cnt;
@@ -1588,7 +1591,7 @@ static void mmhub_v9_4_query_ras_error_count(struct amdgpu_device *adev,
 		reg_value =
 			RREG32(SOC15_REG_ENTRY_OFFSET(mmhub_v9_4_edc_cnt_regs[i]));
 		if (reg_value)
-			mmhub_v9_4_get_ras_error_count(&mmhub_v9_4_edc_cnt_regs[i],
+			mmhub_v9_4_get_ras_error_count(adev, &mmhub_v9_4_edc_cnt_regs[i],
 				reg_value, &sec_count, &ded_count);
 	}
 
diff --git a/drivers/gpu/drm/amd/amdgpu/nv.c b/drivers/gpu/drm/amd/amdgpu/nv.c
index 033cbbc..52318b0 100644
--- a/drivers/gpu/drm/amd/amdgpu/nv.c
+++ b/drivers/gpu/drm/amd/amdgpu/nv.c
@@ -351,8 +351,6 @@ static int nv_asic_reset(struct amdgpu_device *adev)
 	struct smu_context *smu = &adev->smu;
 
 	if (nv_asic_reset_method(adev) == AMD_RESET_METHOD_BACO) {
-		if (!adev->in_suspend)
-			amdgpu_inc_vram_lost(adev);
 		ret = smu_baco_enter(smu);
 		if (ret)
 			return ret;
@@ -360,8 +358,6 @@ static int nv_asic_reset(struct amdgpu_device *adev)
 		if (ret)
 			return ret;
 	} else {
-		if (!adev->in_suspend)
-			amdgpu_inc_vram_lost(adev);
 		ret = nv_asic_mode1_reset(adev);
 	}
 
diff --git a/drivers/gpu/drm/amd/amdgpu/soc15.c b/drivers/gpu/drm/amd/amdgpu/soc15.c
index a40499d..d42a8d8 100644
--- a/drivers/gpu/drm/amd/amdgpu/soc15.c
+++ b/drivers/gpu/drm/amd/amdgpu/soc15.c
@@ -569,14 +569,10 @@ static int soc15_asic_reset(struct amdgpu_device *adev)
 
 	switch (soc15_asic_reset_method(adev)) {
 		case AMD_RESET_METHOD_BACO:
-			if (!adev->in_suspend)
-				amdgpu_inc_vram_lost(adev);
 			return soc15_asic_baco_reset(adev);
 		case AMD_RESET_METHOD_MODE2:
 			return amdgpu_dpm_mode2_reset(adev);
 		default:
-			if (!adev->in_suspend)
-				amdgpu_inc_vram_lost(adev);
 			return soc15_asic_mode1_reset(adev);
 	}
 }
diff --git a/drivers/gpu/drm/amd/amdgpu/vi.c b/drivers/gpu/drm/amd/amdgpu/vi.c
index 78b3590..3ce10e0 100644
--- a/drivers/gpu/drm/amd/amdgpu/vi.c
+++ b/drivers/gpu/drm/amd/amdgpu/vi.c
@@ -765,8 +765,6 @@ static int vi_asic_reset(struct amdgpu_device *adev)
 	int r;
 
 	if (vi_asic_reset_method(adev) == AMD_RESET_METHOD_BACO) {
-		if (!adev->in_suspend)
-			amdgpu_inc_vram_lost(adev);
 		r = amdgpu_dpm_baco_reset(adev);
 	} else {
 		r = vi_asic_pci_config_reset(adev);
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device.c b/drivers/gpu/drm/amd/amdkfd/kfd_device.c
index d5386f1..05bc6d96 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_device.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_device.c
@@ -1112,9 +1112,9 @@ int kfd_gtt_sa_allocate(struct kfd_dev *kfd, unsigned int size,
 	return 0;
 
 kfd_gtt_no_free_chunk:
-	pr_debug("Allocation failed with mem_obj = %p\n", mem_obj);
+	pr_debug("Allocation failed with mem_obj = %p\n", *mem_obj);
 	mutex_unlock(&kfd->gtt_sa_lock);
-	kfree(mem_obj);
+	kfree(*mem_obj);
 	return -ENOMEM;
 }
 
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index d3674d8..f7c5cdc 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -3639,6 +3639,9 @@ fill_dc_plane_info_and_addr(struct amdgpu_device *adev,
 	case DRM_FORMAT_NV12:
 		plane_info->format = SURFACE_PIXEL_FORMAT_VIDEO_420_YCrCb;
 		break;
+	case DRM_FORMAT_P010:
+		plane_info->format = SURFACE_PIXEL_FORMAT_VIDEO_420_10bpc_YCrCb;
+		break;
 	default:
 		DRM_ERROR(
 			"Unsupported screen format %s\n",
@@ -4720,10 +4723,10 @@ amdgpu_dm_connector_atomic_duplicate_state(struct drm_connector *connector)
 static int
 amdgpu_dm_connector_late_register(struct drm_connector *connector)
 {
+#if defined(CONFIG_DEBUG_FS)
 	struct amdgpu_dm_connector *amdgpu_dm_connector =
 		to_amdgpu_dm_connector(connector);
 
-#if defined(CONFIG_DEBUG_FS)
 	connector_debugfs_init(amdgpu_dm_connector);
 #endif
 
@@ -5535,6 +5538,8 @@ static int get_plane_formats(const struct drm_plane *plane,
 
 		if (plane_cap && plane_cap->pixel_format_support.nv12)
 			formats[num_formats++] = DRM_FORMAT_NV12;
+		if (plane_cap && plane_cap->pixel_format_support.p010)
+			formats[num_formats++] = DRM_FORMAT_P010;
 		break;
 
 	case DRM_PLANE_TYPE_OVERLAY:
@@ -5587,12 +5592,15 @@ static int amdgpu_dm_plane_init(struct amdgpu_display_manager *dm,
 	}
 
 	if (plane->type == DRM_PLANE_TYPE_PRIMARY &&
-	    plane_cap && plane_cap->pixel_format_support.nv12) {
+	    plane_cap &&
+	    (plane_cap->pixel_format_support.nv12 ||
+	     plane_cap->pixel_format_support.p010)) {
 		/* This only affects YUV formats. */
 		drm_plane_create_color_properties(
 			plane,
 			BIT(DRM_COLOR_YCBCR_BT601) |
-			BIT(DRM_COLOR_YCBCR_BT709),
+			BIT(DRM_COLOR_YCBCR_BT709) |
+			BIT(DRM_COLOR_YCBCR_BT2020),
 			BIT(DRM_COLOR_YCBCR_LIMITED_RANGE) |
 			BIT(DRM_COLOR_YCBCR_FULL_RANGE),
 			DRM_COLOR_YCBCR_BT709, DRM_COLOR_YCBCR_LIMITED_RANGE);
@@ -5921,7 +5929,8 @@ void amdgpu_dm_connector_init_helper(struct amdgpu_display_manager *dm,
 				adev->mode_info.underscan_vborder_property,
 				0);
 
-	drm_connector_attach_max_bpc_property(&aconnector->base, 8, 16);
+	if (!aconnector->mst_port)
+		drm_connector_attach_max_bpc_property(&aconnector->base, 8, 16);
 
 	/* This defaults to the max in the range, but we want 8bpc for non-edp. */
 	aconnector->base.state->max_bpc = (connector_type == DRM_MODE_CONNECTOR_eDP) ? 16 : 8;
@@ -5940,8 +5949,9 @@ void amdgpu_dm_connector_init_helper(struct amdgpu_display_manager *dm,
 			&aconnector->base.base,
 			dm->ddev->mode_config.hdr_output_metadata_property, 0);
 
-		drm_connector_attach_vrr_capable_property(
-			&aconnector->base);
+		if (!aconnector->mst_port)
+			drm_connector_attach_vrr_capable_property(&aconnector->base);
+
 #ifdef CONFIG_DRM_AMD_DC_HDCP
 		if (adev->dm.hdcp_workqueue)
 			drm_connector_attach_content_protection_property(&aconnector->base, true);
@@ -6264,12 +6274,6 @@ static int get_cursor_position(struct drm_plane *plane, struct drm_crtc *crtc,
 	    y <= -amdgpu_crtc->max_cursor_height)
 		return 0;
 
-	if (crtc->primary->state) {
-		/* avivo cursor are offset into the total surface */
-		x += crtc->primary->state->src_x >> 16;
-		y += crtc->primary->state->src_y >> 16;
-	}
-
 	if (x < 0) {
 		xorigin = min(-x, amdgpu_crtc->max_cursor_width - 1);
 		x = 0;
@@ -6279,6 +6283,7 @@ static int get_cursor_position(struct drm_plane *plane, struct drm_crtc *crtc,
 		y = 0;
 	}
 	position->enable = true;
+	position->translate_by_source = true;
 	position->x = x;
 	position->y = y;
 	position->x_hotspot = xorigin;
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_hdcp.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_hdcp.c
index 5b70ed3..78e1c11 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_hdcp.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_hdcp.c
@@ -192,10 +192,13 @@ void hdcp_update_display(struct hdcp_workqueue *hdcp_work,
 					    &hdcp_work->srm_version);
 
 			display->adjust.disable = 0;
-			if (content_type == DRM_MODE_HDCP_CONTENT_TYPE0)
+			if (content_type == DRM_MODE_HDCP_CONTENT_TYPE0) {
+				hdcp_w->link.adjust.hdcp1.disable = 0;
 				hdcp_w->link.adjust.hdcp2.force_type = MOD_HDCP_FORCE_TYPE_0;
-			else if (content_type == DRM_MODE_HDCP_CONTENT_TYPE1)
+			} else if (content_type == DRM_MODE_HDCP_CONTENT_TYPE1) {
+				hdcp_w->link.adjust.hdcp1.disable = 1;
 				hdcp_w->link.adjust.hdcp2.force_type = MOD_HDCP_FORCE_TYPE_1;
+			}
 
 			schedule_delayed_work(&hdcp_w->property_validate_dwork,
 					      msecs_to_jiffies(DRM_HDCP_CHECK_PERIOD_MS));
@@ -263,7 +266,7 @@ static void event_callback(struct work_struct *work)
 
 	mutex_lock(&hdcp_work->mutex);
 
-	cancel_delayed_work(&hdcp_work->watchdog_timer_dwork);
+	cancel_delayed_work(&hdcp_work->callback_dwork);
 
 	mod_hdcp_process_event(&hdcp_work->hdcp, MOD_HDCP_EVENT_CALLBACK,
 			       &hdcp_work->output);
@@ -344,6 +347,8 @@ static void event_watchdog_timer(struct work_struct *work)
 
 	mutex_lock(&hdcp_work->mutex);
 
+	cancel_delayed_work(&hdcp_work->watchdog_timer_dwork);
+
 	mod_hdcp_process_event(&hdcp_work->hdcp,
 			       MOD_HDCP_EVENT_WATCHDOG_TIMEOUT,
 			       &hdcp_work->output);
@@ -414,7 +419,8 @@ static void update_config(void *handle, struct cp_psp_stream_config *config)
 	link->dp.rev = aconnector->dc_link->dpcd_caps.dpcd_rev.raw;
 	link->dp.mst_supported = config->mst_supported;
 	display->adjust.disable = 1;
-	link->adjust.auth_delay = 2;
+	link->adjust.auth_delay = 3;
+	link->adjust.hdcp1.disable = 0;
 
 	hdcp_update_display(hdcp_work, link_index, aconnector, DRM_MODE_HDCP_CONTENT_TYPE0, false);
 }
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
index e8208df..fabbe78 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
@@ -410,6 +410,14 @@ dm_dp_add_mst_connector(struct drm_dp_mst_topology_mgr *mgr,
 	drm_connector_attach_encoder(&aconnector->base,
 				     &aconnector->mst_encoder->base);
 
+	connector->max_bpc_property = master->base.max_bpc_property;
+	if (connector->max_bpc_property)
+		drm_connector_attach_max_bpc_property(connector, 8, 16);
+
+	connector->vrr_capable_property = master->base.vrr_capable_property;
+	if (connector->vrr_capable_property)
+		drm_connector_attach_vrr_capable_property(connector);
+
 	drm_object_attach_property(
 		&connector->base,
 		dev->mode_config.path_property,
diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c
index ab267dd..24c57658 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c
@@ -643,7 +643,7 @@ static void rn_clk_mgr_helper_populate_bw_params(struct clk_bw_params *bw_params
 	/* Find lowest DPM, FCLK is filled in reverse order*/
 
 	for (i = PP_SMU_NUM_FCLK_DPM_LEVELS - 1; i >= 0; i--) {
-		if (clock_table->FClocks[i].Freq != 0) {
+		if (clock_table->FClocks[i].Freq != 0 && clock_table->FClocks[i].Vol != 0) {
 			j = i;
 			break;
 		}
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index 2ffb221..8489f1e5 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -283,6 +283,8 @@ bool dc_stream_adjust_vmin_vmax(struct dc *dc,
 	int i = 0;
 	bool ret = false;
 
+	stream->adjust = *adjust;
+
 	for (i = 0; i < MAX_PIPES; i++) {
 		struct pipe_ctx *pipe = &dc->current_state->res_ctx.pipe_ctx[i];
 
@@ -1360,6 +1362,26 @@ bool dc_commit_state(struct dc *dc, struct dc_state *context)
 	return (result == DC_OK);
 }
 
+static bool is_flip_pending_in_pipes(struct dc *dc, struct dc_state *context)
+{
+	int i;
+	struct pipe_ctx *pipe;
+
+	for (i = 0; i < MAX_PIPES; i++) {
+		pipe = &context->res_ctx.pipe_ctx[i];
+
+		if (!pipe->plane_state)
+			continue;
+
+		/* Must set to false to start with, due to OR in update function */
+		pipe->plane_state->status.is_flip_pending = false;
+		dc->hwss.update_pending_status(pipe);
+		if (pipe->plane_state->status.is_flip_pending)
+			return true;
+	}
+	return false;
+}
+
 bool dc_post_update_surfaces_to_stream(struct dc *dc)
 {
 	int i;
@@ -1370,6 +1392,9 @@ bool dc_post_update_surfaces_to_stream(struct dc *dc)
 
 	post_surface_trace(dc);
 
+	if (is_flip_pending_in_pipes(dc, context))
+		return true;
+
 	for (i = 0; i < dc->res_pool->pipe_count; i++)
 		if (context->res_ctx.pipe_ctx[i].stream == NULL ||
 		    context->res_ctx.pipe_ctx[i].plane_state == NULL) {
@@ -1703,6 +1728,9 @@ static enum surface_update_type det_surface_update(const struct dc *dc,
 	if (u->coeff_reduction_factor)
 		update_flags->bits.coeff_reduction_change = 1;
 
+	if (u->gamut_remap_matrix)
+		update_flags->bits.gamut_remap_change = 1;
+
 	if (u->gamma) {
 		enum surface_pixel_format format = SURFACE_PIXEL_FORMAT_GRPH_BEGIN;
 
@@ -1728,7 +1756,8 @@ static enum surface_update_type det_surface_update(const struct dc *dc,
 
 	if (update_flags->bits.input_csc_change
 			|| update_flags->bits.coeff_reduction_change
-			|| update_flags->bits.gamma_change) {
+			|| update_flags->bits.gamma_change
+			|| update_flags->bits.gamut_remap_change) {
 		type = UPDATE_TYPE_FULL;
 		elevate_update_type(&overall_type, type);
 	}
@@ -1832,8 +1861,9 @@ enum surface_update_type dc_check_update_surfaces_for_stream(
 		// Else we fallback to mem compare.
 		} else if (memcmp(&dc->current_state->bw_ctx.bw.dcn.clk, &dc->clk_mgr->clks, offsetof(struct dc_clocks, prev_p_state_change_support)) != 0) {
 			dc->optimized_required = true;
-		} else if (dc->wm_optimized_required)
-			dc->optimized_required = true;
+		}
+
+		dc->optimized_required |= dc->wm_optimized_required;
 	}
 
 	return type;
@@ -1973,6 +2003,10 @@ static void copy_surface_update_to_plane(
 	if (srf_update->coeff_reduction_factor)
 		surface->coeff_reduction_factor =
 			*srf_update->coeff_reduction_factor;
+
+	if (srf_update->gamut_remap_matrix)
+		surface->gamut_remap_matrix =
+			*srf_update->gamut_remap_matrix;
 }
 
 static void copy_stream_update_to_stream(struct dc *dc,
@@ -2431,7 +2465,7 @@ void dc_commit_updates_for_stream(struct dc *dc,
 	enum surface_update_type update_type;
 	struct dc_state *context;
 	struct dc_context *dc_ctx = dc->ctx;
-	int i;
+	int i, j;
 
 	stream_status = dc_stream_get_status(stream);
 	context = dc->current_state;
@@ -2469,6 +2503,17 @@ void dc_commit_updates_for_stream(struct dc *dc,
 
 		copy_surface_update_to_plane(surface, &srf_updates[i]);
 
+		if (update_type >= UPDATE_TYPE_MED) {
+			for (j = 0; j < dc->res_pool->pipe_count; j++) {
+				struct pipe_ctx *pipe_ctx =
+					&context->res_ctx.pipe_ctx[j];
+
+				if (pipe_ctx->plane_state != surface)
+					continue;
+
+				resource_build_scaling_params(pipe_ctx);
+			}
+		}
 	}
 
 	copy_stream_update_to_stream(dc, context, stream, stream_update);
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c
index 75c7ce4..f4bcc71 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c
@@ -1077,6 +1077,7 @@ bool resource_build_scaling_params(struct pipe_ctx *pipe_ctx)
 	 * on certain displays, such as the Sharp 4k
 	 */
 	pipe_ctx->plane_res.scl_data.lb_params.depth = LB_PIXEL_DEPTH_30BPP;
+	pipe_ctx->plane_res.scl_data.lb_params.alpha_en = plane_state->per_pixel_alpha;
 
 	pipe_ctx->plane_res.scl_data.recout.x += timing->h_border_left;
 	pipe_ctx->plane_res.scl_data.recout.y += timing->v_border_top;
diff --git a/drivers/gpu/drm/amd/display/dc/dc.h b/drivers/gpu/drm/amd/display/dc/dc.h
index d3ceb39..1935cf6 100644
--- a/drivers/gpu/drm/amd/display/dc/dc.h
+++ b/drivers/gpu/drm/amd/display/dc/dc.h
@@ -726,6 +726,7 @@ union surface_update_flags {
 		uint32_t output_tf_change:1;
 		uint32_t pixel_format_change:1;
 		uint32_t plane_size_change:1;
+		uint32_t gamut_remap_change:1;
 
 		/* Full updates */
 		uint32_t new_plane:1;
@@ -760,6 +761,7 @@ struct dc_plane_state {
 	struct dc_csc_transform input_csc_color_matrix;
 	struct fixed31_32 coeff_reduction_factor;
 	struct fixed31_32 hdr_mult;
+	struct colorspace_transform gamut_remap_matrix;
 
 	// TODO: No longer used, remove
 	struct dc_hdr_static_metadata hdr_static_ctx;
@@ -839,6 +841,7 @@ struct dc_surface_update {
 	const struct dc_transfer_func *func_shaper;
 	const struct dc_3dlut *lut3d_func;
 	const struct dc_transfer_func *blend_tf;
+	const struct colorspace_transform *gamut_remap_matrix;
 };
 
 /*
diff --git a/drivers/gpu/drm/amd/display/dc/dc_hw_types.h b/drivers/gpu/drm/amd/display/dc/dc_hw_types.h
index 25c50bc..a8dc308 100644
--- a/drivers/gpu/drm/amd/display/dc/dc_hw_types.h
+++ b/drivers/gpu/drm/amd/display/dc/dc_hw_types.h
@@ -385,6 +385,8 @@ struct dc_cursor_position {
 	 */
 	bool enable;
 
+	/* Translate cursor x/y by the source rectangle for each plane. */
+	bool translate_by_source;
 };
 
 struct dc_cursor_mi_param {
diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
index 0976e37..c279982 100644
--- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
@@ -2685,6 +2685,23 @@ void dce110_set_cursor_position(struct pipe_ctx *pipe_ctx)
 		.mirror = pipe_ctx->plane_state->horizontal_mirror
 	};
 
+	/**
+	 * If the cursor's source viewport is clipped then we need to
+	 * translate the cursor to appear in the correct position on
+	 * the screen.
+	 *
+	 * This translation isn't affected by scaling so it needs to be
+	 * done *after* we adjust the position for the scale factor.
+	 *
+	 * This is only done by opt-in for now since there are still
+	 * some usecases like tiled display that might enable the
+	 * cursor on both streams while expecting dc to clip it.
+	 */
+	if (pos_cpy.translate_by_source) {
+		pos_cpy.x += pipe_ctx->plane_state->src_rect.x;
+		pos_cpy.y += pipe_ctx->plane_state->src_rect.y;
+	}
+
 	if (pipe_ctx->plane_state->address.type
 			== PLN_ADDR_TYPE_VIDEO_PROGRESSIVE)
 		pos_cpy.enable = false;
diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
index 9cc3314..b035754 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
@@ -2004,6 +2004,12 @@ void dcn10_program_gamut_remap(struct pipe_ctx *pipe_ctx)
 		for (i = 0; i < CSC_TEMPERATURE_MATRIX_SIZE; i++)
 			adjust.temperature_matrix[i] =
 				pipe_ctx->stream->gamut_remap_matrix.matrix[i];
+	} else if (pipe_ctx->plane_state &&
+		   pipe_ctx->plane_state->gamut_remap_matrix.enable_remap == true) {
+		adjust.gamut_adjust_type = GRAPHICS_GAMUT_ADJUST_TYPE_SW;
+		for (i = 0; i < CSC_TEMPERATURE_MATRIX_SIZE; i++)
+			adjust.temperature_matrix[i] =
+				pipe_ctx->plane_state->gamut_remap_matrix.matrix[i];
 	}
 
 	pipe_ctx->plane_res.dpp->funcs->dpp_set_gamut_remap(pipe_ctx->plane_res.dpp, &adjust);
@@ -3015,12 +3021,50 @@ void dcn10_set_cursor_position(struct pipe_ctx *pipe_ctx)
 	int x_pos = pos_cpy.x;
 	int y_pos = pos_cpy.y;
 
-	// translate cursor from stream space to plane space
+	/**
+	 * DC cursor is stream space, HW cursor is plane space and drawn
+	 * as part of the framebuffer.
+	 *
+	 * Cursor position can't be negative, but hotspot can be used to
+	 * shift cursor out of the plane bounds. Hotspot must be smaller
+	 * than the cursor size.
+	 */
+
+	/**
+	 * Translate cursor from stream space to plane space.
+	 *
+	 * If the cursor is scaled then we need to scale the position
+	 * to be in the approximately correct place. We can't do anything
+	 * about the actual size being incorrect, that's a limitation of
+	 * the hardware.
+	 */
 	x_pos = (x_pos - x_plane) * pipe_ctx->plane_state->src_rect.width /
 			pipe_ctx->plane_state->dst_rect.width;
 	y_pos = (y_pos - y_plane) * pipe_ctx->plane_state->src_rect.height /
 			pipe_ctx->plane_state->dst_rect.height;
 
+	/**
+	 * If the cursor's source viewport is clipped then we need to
+	 * translate the cursor to appear in the correct position on
+	 * the screen.
+	 *
+	 * This translation isn't affected by scaling so it needs to be
+	 * done *after* we adjust the position for the scale factor.
+	 *
+	 * This is only done by opt-in for now since there are still
+	 * some usecases like tiled display that might enable the
+	 * cursor on both streams while expecting dc to clip it.
+	 */
+	if (pos_cpy.translate_by_source) {
+		x_pos += pipe_ctx->plane_state->src_rect.x;
+		y_pos += pipe_ctx->plane_state->src_rect.y;
+	}
+
+	/**
+	 * If the position is negative then we need to add to the hotspot
+	 * to shift the cursor outside the plane.
+	 */
+
 	if (x_pos < 0) {
 		pos_cpy.x_hotspot -= x_pos;
 		x_pos = 0;
diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.c
index 63acb8f..17d96ec6 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.c
@@ -343,6 +343,23 @@ void optc1_set_blank_data_double_buffer(struct timing_generator *optc, bool enab
 }
 
 /**
+ * optc1_set_timing_double_buffer() - DRR double buffering control
+ *
+ * Sets double buffer point for V_TOTAL, H_TOTAL, VTOTAL_MIN,
+ * VTOTAL_MAX, VTOTAL_MIN_SEL and VTOTAL_MAX_SEL registers.
+ *
+ * Options: any time,  start of frame, dp start of frame (range timing)
+ */
+void optc1_set_timing_double_buffer(struct timing_generator *optc, bool enable)
+{
+	struct optc *optc1 = DCN10TG_FROM_TG(optc);
+	uint32_t mode = enable ? 2 : 0;
+
+	REG_UPDATE(OTG_DOUBLE_BUFFER_CONTROL,
+		   OTG_RANGE_TIMING_DBUF_UPDATE_MODE, mode);
+}
+
+/**
  * unblank_crtc
  * Call ASIC Control Object to UnBlank CRTC.
  */
@@ -1353,6 +1370,7 @@ void optc1_clear_optc_underflow(struct timing_generator *optc)
 void optc1_tg_init(struct timing_generator *optc)
 {
 	optc1_set_blank_data_double_buffer(optc, true);
+	optc1_set_timing_double_buffer(optc, true);
 	optc1_clear_optc_underflow(optc);
 }
 
diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.h b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.h
index f277656..9a459a8 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.h
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.h
@@ -185,6 +185,7 @@ struct dcn_optc_registers {
 	SF(OTG0_OTG_GLOBAL_CONTROL0, OTG_MASTER_UPDATE_LOCK_SEL, mask_sh),\
 	SF(OTG0_OTG_DOUBLE_BUFFER_CONTROL, OTG_UPDATE_PENDING, mask_sh),\
 	SF(OTG0_OTG_DOUBLE_BUFFER_CONTROL, OTG_BLANK_DATA_DOUBLE_BUFFER_EN, mask_sh),\
+	SF(OTG0_OTG_DOUBLE_BUFFER_CONTROL, OTG_RANGE_TIMING_DBUF_UPDATE_MODE, mask_sh),\
 	SF(OTG0_OTG_H_TOTAL, OTG_H_TOTAL, mask_sh),\
 	SF(OTG0_OTG_H_BLANK_START_END, OTG_H_BLANK_START, mask_sh),\
 	SF(OTG0_OTG_H_BLANK_START_END, OTG_H_BLANK_END, mask_sh),\
@@ -643,6 +644,8 @@ bool optc1_is_optc_underflow_occurred(struct timing_generator *optc);
 
 void optc1_set_blank_data_double_buffer(struct timing_generator *optc, bool enable);
 
+void optc1_set_timing_double_buffer(struct timing_generator *optc, bool enable);
+
 bool optc1_get_otg_active_size(struct timing_generator *optc,
 		uint32_t *otg_active_width,
 		uint32_t *otg_active_height);
diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c
index 261bdc3..07265ca 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c
@@ -552,7 +552,8 @@ static const struct dc_plane_cap plane_cap = {
 	.pixel_format_support = {
 			.argb8888 = true,
 			.nv12 = true,
-			.fp16 = true
+			.fp16 = true,
+			.p010 = true
 	},
 
 	.max_upscale_factor = {
@@ -584,7 +585,7 @@ static const struct dc_debug_options debug_defaults_drv = {
 		.disable_pplib_clock_request = false,
 		.disable_pplib_wm_range = false,
 		.pplib_wm_report_mode = WM_REPORT_DEFAULT,
-		.pipe_split_policy = MPC_SPLIT_AVOID_MULT_DISP,
+		.pipe_split_policy = MPC_SPLIT_DYNAMIC,
 		.force_single_disp_pipe_split = true,
 		.disable_dcc = DCC_ENABLE,
 		.voltage_align_fclk = true,
diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
index 2333182..22f421e 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
@@ -1373,6 +1373,7 @@ static void dcn20_update_dchubp_dpp(
 	}
 
 	if (pipe_ctx->update_flags.bits.viewport ||
+			(context == dc->current_state && plane_state->update_flags.bits.position_change) ||
 			(context == dc->current_state && plane_state->update_flags.bits.scaling_change) ||
 			(context == dc->current_state && pipe_ctx->stream->update_flags.bits.scaling)) {
 
diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c
index a673952..5cdbba0 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c
@@ -1012,7 +1012,8 @@ static const struct dc_plane_cap plane_cap = {
 	.pixel_format_support = {
 			.argb8888 = true,
 			.nv12 = true,
-			.fp16 = true
+			.fp16 = true,
+			.p010 = true
 	},
 
 	.max_upscale_factor = {
@@ -3342,7 +3343,7 @@ void dcn20_cap_soc_clocks(
 void dcn20_update_bounding_box(struct dc *dc, struct _vcs_dpi_soc_bounding_box_st *bb,
 		struct pp_smu_nv_clock_table *max_clocks, unsigned int *uclk_states, unsigned int num_states)
 {
-	struct _vcs_dpi_voltage_scaling_st calculated_states[MAX_CLOCK_LIMIT_STATES];
+	struct _vcs_dpi_voltage_scaling_st calculated_states[DC__VOLTAGE_STATES];
 	int i;
 	int num_calculated_states = 0;
 	int min_dcfclk = 0;
diff --git a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
index 51b5910..b25484a 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
@@ -300,7 +300,7 @@ struct _vcs_dpi_soc_bounding_box_st dcn2_1_soc = {
 	.xfc_bus_transport_time_us = 4,
 	.xfc_xbuf_latency_tolerance_us = 4,
 	.use_urgent_burst_bw = 1,
-	.num_states = 9
+	.num_states = 8
 };
 
 #ifndef MAX
@@ -838,7 +838,8 @@ static const struct dc_plane_cap plane_cap = {
 	.pixel_format_support = {
 			.argb8888 = true,
 			.nv12 = true,
-			.fp16 = true
+			.fp16 = true,
+			.p010 = true
 	},
 
 	.max_upscale_factor = {
@@ -1376,21 +1377,8 @@ static void update_bw_bounding_box(struct dc *dc, struct clk_bw_params *bw_param
 	unsigned int i, j, k;
 	int closest_clk_lvl;
 
-	// diags does not retrieve proper values from SMU
-	// cap states to 5 and make state 5 the max state
-	if (IS_FPGA_MAXIMUS_DC(dc->ctx->dce_environment) || IS_DIAG_DC(dc->ctx->dce_environment)) {
-		dcn2_1_soc.num_states = 5;
-
-		dcn2_1_soc.clock_limits[5].state = 5;
-		dcn2_1_soc.clock_limits[5].dcfclk_mhz = 810.0;
-		dcn2_1_soc.clock_limits[5].fabricclk_mhz = 1600.0;
-		dcn2_1_soc.clock_limits[5].dispclk_mhz = 1395.0;
-		dcn2_1_soc.clock_limits[5].dppclk_mhz = 1285.0;
-		dcn2_1_soc.clock_limits[5].phyclk_mhz = 1325.0;
-		dcn2_1_soc.clock_limits[5].socclk_mhz = 953.0;
-		dcn2_1_soc.clock_limits[5].dscclk_mhz = 489.0;
-		dcn2_1_soc.clock_limits[5].dram_speed_mts = 4266.0;
-	} else {
+	// Default clock levels are used for diags, which may lead to overclocking.
+	if (!IS_FPGA_MAXIMUS_DC(dc->ctx->dce_environment) && !IS_DIAG_DC(dc->ctx->dce_environment)) {
 		dcn2_1_ip.max_num_otg = pool->base.res_cap->num_timing_generator;
 		dcn2_1_ip.max_num_dpp = pool->base.pipe_count;
 		dcn2_1_soc.num_chans = bw_params->num_channels;
@@ -1403,16 +1391,16 @@ static void update_bw_bounding_box(struct dc *dc, struct clk_bw_params *bw_param
 		dcn2_1_soc.clock_limits[0].dram_speed_mts = clk_table->entries[0].memclk_mhz * 2;
 
 		/*
-		 * Other levels: find cloest DCN clocks that fit the given clock limit using dcfclk
-		 * as indicater
+		 * Other levels: find closest DCN clocks that fit the given clock limit using dcfclk
+		 * as indicator
 		 */
 
 		closest_clk_lvl = -1;
 		/* index currently being filled */
 		k = 1;
 		for (i = 1; i < clk_table->num_entries; i++) {
-			/* loop backwards, skip duplicate state, +1 because SMU has precision issue */
-			for (j = dcn2_1_soc.num_states - 2; j >= k; j--) {
+			/* loop backwards, skip duplicate state*/
+			for (j = dcn2_1_soc.num_states - 1; j >= k; j--) {
 				if ((unsigned int) dcn2_1_soc.clock_limits[j].dcfclk_mhz <= clk_table->entries[i].dcfclk_mhz) {
 					closest_clk_lvl = j;
 					break;
@@ -1437,13 +1425,13 @@ static void update_bw_bounding_box(struct dc *dc, struct clk_bw_params *bw_param
 				k++;
 			}
 		}
-
-		/* duplicate last level */
-		dcn2_1_soc.clock_limits[k] = dcn2_1_soc.clock_limits[k - 1];
-		dcn2_1_soc.clock_limits[k].state = k;
-		dcn2_1_soc.num_states = k + 1;
+		dcn2_1_soc.num_states = k;
 	}
 
+	/* duplicate last level */
+	dcn2_1_soc.clock_limits[dcn2_1_soc.num_states] = dcn2_1_soc.clock_limits[dcn2_1_soc.num_states - 1];
+	dcn2_1_soc.clock_limits[dcn2_1_soc.num_states].state = dcn2_1_soc.num_states;
+
 	dml_init_instance(&dc->dml, &dcn2_1_soc, &dcn2_1_ip, DML_PROJECT_DCN21);
 }
 
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dc_features.h b/drivers/gpu/drm/amd/display/dc/dml/dc_features.h
index ea4cde9..2a19833 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dc_features.h
+++ b/drivers/gpu/drm/amd/display/dc/dml/dc_features.h
@@ -29,7 +29,7 @@
 #define DC__PRESENT 1
 #define DC__PRESENT__1 1
 #define DC__NUM_DPP 4
-#define DC__VOLTAGE_STATES 7
+#define DC__VOLTAGE_STATES 9
 #define DC__NUM_DPP__4 1
 #define DC__NUM_DPP__0_PRESENT 1
 #define DC__NUM_DPP__1_PRESENT 1
diff --git a/drivers/gpu/drm/amd/display/dc/dml/display_mode_structs.h b/drivers/gpu/drm/amd/display/dc/dml/display_mode_structs.h
index dfd3be4..687010c 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/display_mode_structs.h
+++ b/drivers/gpu/drm/amd/display/dc/dml/display_mode_structs.h
@@ -22,11 +22,12 @@
  * Authors: AMD
  *
  */
+
+#include "dc_features.h"
+
 #ifndef __DISPLAY_MODE_STRUCTS_H__
 #define __DISPLAY_MODE_STRUCTS_H__
 
-#define MAX_CLOCK_LIMIT_STATES 9
-
 typedef struct _vcs_dpi_voltage_scaling_st voltage_scaling_st;
 typedef struct _vcs_dpi_soc_bounding_box_st soc_bounding_box_st;
 typedef struct _vcs_dpi_ip_params_st ip_params_st;
@@ -68,7 +69,7 @@ struct _vcs_dpi_voltage_scaling_st {
 };
 
 struct _vcs_dpi_soc_bounding_box_st {
-	struct _vcs_dpi_voltage_scaling_st clock_limits[MAX_CLOCK_LIMIT_STATES];
+	struct _vcs_dpi_voltage_scaling_st clock_limits[DC__VOLTAGE_STATES];
 	unsigned int num_states;
 	double sr_exit_time_us;
 	double sr_enter_plus_exit_time_us;
diff --git a/drivers/gpu/drm/amd/display/include/dal_asic_id.h b/drivers/gpu/drm/amd/display/include/dal_asic_id.h
index 8a87d0e..2359e88 100644
--- a/drivers/gpu/drm/amd/display/include/dal_asic_id.h
+++ b/drivers/gpu/drm/amd/display/include/dal_asic_id.h
@@ -136,6 +136,7 @@
 #define RAVEN2_A0 0x81
 #define RAVEN1_F0 0xF0
 #define RAVEN_UNKNOWN 0xFF
+#define RENOIR_A0 0x91
 #ifndef ASICREV_IS_RAVEN
 #define ASICREV_IS_RAVEN(eChipRev) ((eChipRev >= RAVEN_A0) && eChipRev < RAVEN_UNKNOWN)
 #endif
@@ -171,8 +172,6 @@ enum {
 #define ASICREV_IS_NAVI10_P(eChipRev)        (eChipRev < NV_NAVI12_P_A0)
 #define ASICREV_IS_NAVI12_P(eChipRev)        ((eChipRev >= NV_NAVI12_P_A0) && (eChipRev < NV_NAVI14_M_A0))
 #define ASICREV_IS_NAVI14_M(eChipRev)        ((eChipRev >= NV_NAVI14_M_A0) && (eChipRev < NV_UNKNOWN))
-#define RENOIR_A0 0x91
-#define DEVICE_ID_RENOIR_1636 0x1636   // Renoir
 #define ASICREV_IS_RENOIR(eChipRev) ((eChipRev >= RENOIR_A0) && (eChipRev < RAVEN1_F0))
 
 /*
@@ -183,6 +182,9 @@ enum {
 #define DEVICE_ID_TEMASH_9839 0x9839
 #define DEVICE_ID_TEMASH_983D 0x983D
 
+/* RENOIR */
+#define DEVICE_ID_RENOIR_1636 0x1636
+
 /* Asic Family IDs for different asic family. */
 #define FAMILY_CI 120 /* Sea Islands: Hawaii (P), Bonaire (M) */
 #define FAMILY_KV 125 /* Fusion => Kaveri: Spectre, Spooky; Kabini: Kalindi */
diff --git a/drivers/gpu/drm/amd/display/modules/freesync/freesync.c b/drivers/gpu/drm/amd/display/modules/freesync/freesync.c
index 4e54282..c33454a 100644
--- a/drivers/gpu/drm/amd/display/modules/freesync/freesync.c
+++ b/drivers/gpu/drm/amd/display/modules/freesync/freesync.c
@@ -734,6 +734,7 @@ void mod_freesync_build_vrr_params(struct mod_freesync *mod_freesync,
 {
 	struct core_freesync *core_freesync = NULL;
 	unsigned long long nominal_field_rate_in_uhz = 0;
+	unsigned long long rounded_nominal_in_uhz = 0;
 	unsigned int refresh_range = 0;
 	unsigned long long min_refresh_in_uhz = 0;
 	unsigned long long max_refresh_in_uhz = 0;
@@ -750,17 +751,20 @@ void mod_freesync_build_vrr_params(struct mod_freesync *mod_freesync,
 	min_refresh_in_uhz = in_config->min_refresh_in_uhz;
 	max_refresh_in_uhz = in_config->max_refresh_in_uhz;
 
-	// Don't allow min > max
-	if (min_refresh_in_uhz > max_refresh_in_uhz)
-		min_refresh_in_uhz = max_refresh_in_uhz;
-
 	// Full range may be larger than current video timing, so cap at nominal
 	if (max_refresh_in_uhz > nominal_field_rate_in_uhz)
 		max_refresh_in_uhz = nominal_field_rate_in_uhz;
 
 	// Full range may be larger than current video timing, so cap at nominal
-	if (min_refresh_in_uhz > nominal_field_rate_in_uhz)
-		min_refresh_in_uhz = nominal_field_rate_in_uhz;
+	if (min_refresh_in_uhz > max_refresh_in_uhz)
+		min_refresh_in_uhz = max_refresh_in_uhz;
+
+	// If a monitor reports exactly max refresh of 2x of min, enforce it on nominal
+	rounded_nominal_in_uhz =
+			div_u64(nominal_field_rate_in_uhz + 50000, 100000) * 100000;
+	if (in_config->max_refresh_in_uhz == (2 * in_config->min_refresh_in_uhz) &&
+		in_config->max_refresh_in_uhz == rounded_nominal_in_uhz)
+		min_refresh_in_uhz = div_u64(nominal_field_rate_in_uhz, 2);
 
 	if (!vrr_settings_require_update(core_freesync,
 			in_config, (unsigned int)min_refresh_in_uhz, (unsigned int)max_refresh_in_uhz,
@@ -792,11 +796,6 @@ void mod_freesync_build_vrr_params(struct mod_freesync *mod_freesync,
 		refresh_range = in_out_vrr->max_refresh_in_uhz -
 				in_out_vrr->min_refresh_in_uhz;
 
-		in_out_vrr->btr.margin_in_us = in_out_vrr->max_duration_in_us -
-				2 * in_out_vrr->min_duration_in_us;
-		if (in_out_vrr->btr.margin_in_us > BTR_MAX_MARGIN)
-			in_out_vrr->btr.margin_in_us = BTR_MAX_MARGIN;
-
 		in_out_vrr->supported = true;
 	}
 
@@ -804,9 +803,14 @@ void mod_freesync_build_vrr_params(struct mod_freesync *mod_freesync,
 
 	in_out_vrr->btr.btr_enabled = in_config->btr;
 
-	if (in_out_vrr->max_refresh_in_uhz <
-			2 * in_out_vrr->min_refresh_in_uhz)
+	if (in_out_vrr->max_refresh_in_uhz < (2 * in_out_vrr->min_refresh_in_uhz))
 		in_out_vrr->btr.btr_enabled = false;
+	else {
+		in_out_vrr->btr.margin_in_us = in_out_vrr->max_duration_in_us -
+				2 * in_out_vrr->min_duration_in_us;
+		if (in_out_vrr->btr.margin_in_us > BTR_MAX_MARGIN)
+			in_out_vrr->btr.margin_in_us = BTR_MAX_MARGIN;
+	}
 
 	in_out_vrr->btr.btr_active = false;
 	in_out_vrr->btr.inserted_duration_in_us = 0;
@@ -1008,8 +1012,8 @@ unsigned long long mod_freesync_calc_nominal_field_rate(
 	unsigned int total = stream->timing.h_total * stream->timing.v_total;
 
 	/* Calculate nominal field rate for stream, rounded up to nearest integer */
-	nominal_field_rate_in_uhz = stream->timing.pix_clk_100hz / 10;
-	nominal_field_rate_in_uhz *= 1000ULL * 1000ULL * 1000ULL;
+	nominal_field_rate_in_uhz = stream->timing.pix_clk_100hz;
+	nominal_field_rate_in_uhz *= 100000000ULL;
 
 	nominal_field_rate_in_uhz =	div_u64(nominal_field_rate_in_uhz, total);
 
diff --git a/drivers/gpu/drm/amd/display/modules/hdcp/hdcp.c b/drivers/gpu/drm/amd/display/modules/hdcp/hdcp.c
index e9fbd94..cc1d3f4 100644
--- a/drivers/gpu/drm/amd/display/modules/hdcp/hdcp.c
+++ b/drivers/gpu/drm/amd/display/modules/hdcp/hdcp.c
@@ -328,8 +328,7 @@ enum mod_hdcp_status mod_hdcp_add_display(struct mod_hdcp *hdcp,
 	/* add display to connection */
 	hdcp->connection.link = *link;
 	*display_container = *display;
-	status = mod_hdcp_add_display_to_topology(hdcp, display_container);
-
+	status = mod_hdcp_add_display_to_topology(hdcp, display->index);
 	if (status != MOD_HDCP_STATUS_SUCCESS)
 		goto out;
 
@@ -375,7 +374,7 @@ enum mod_hdcp_status mod_hdcp_remove_display(struct mod_hdcp *hdcp,
 	status = mod_hdcp_remove_display_from_topology(hdcp, index);
 	if (status != MOD_HDCP_STATUS_SUCCESS)
 		goto out;
-	memset(display, 0, sizeof(struct mod_hdcp_display));
+	display->state = MOD_HDCP_DISPLAY_INACTIVE;
 
 	/* request authentication when connection is not reset */
 	if (current_state(hdcp) != HDCP_UNINITIALIZED)
diff --git a/drivers/gpu/drm/amd/display/modules/hdcp/hdcp.h b/drivers/gpu/drm/amd/display/modules/hdcp/hdcp.h
index 60ff1a0..5cb4546 100644
--- a/drivers/gpu/drm/amd/display/modules/hdcp/hdcp.h
+++ b/drivers/gpu/drm/amd/display/modules/hdcp/hdcp.h
@@ -328,7 +328,7 @@ void mod_hdcp_dump_binary_message(uint8_t *msg, uint32_t msg_size,
 
 /* psp functions */
 enum mod_hdcp_status mod_hdcp_add_display_to_topology(
-		struct mod_hdcp *hdcp, struct mod_hdcp_display *display);
+		struct mod_hdcp *hdcp, uint8_t index);
 enum mod_hdcp_status mod_hdcp_remove_display_from_topology(
 		struct mod_hdcp *hdcp, uint8_t index);
 enum mod_hdcp_status mod_hdcp_hdcp1_create_session(struct mod_hdcp *hdcp);
@@ -503,6 +503,11 @@ static inline uint8_t is_display_active(struct mod_hdcp_display *display)
 	return display->state >= MOD_HDCP_DISPLAY_ACTIVE;
 }
 
+static inline uint8_t is_display_added(struct mod_hdcp_display *display)
+{
+	return display->state >= MOD_HDCP_DISPLAY_ACTIVE_AND_ADDED;
+}
+
 static inline uint8_t is_display_encryption_enabled(struct mod_hdcp_display *display)
 {
 	return display->state >= MOD_HDCP_DISPLAY_ENCRYPTION_ENABLED;
@@ -510,23 +515,34 @@ static inline uint8_t is_display_encryption_enabled(struct mod_hdcp_display *dis
 
 static inline uint8_t get_active_display_count(struct mod_hdcp *hdcp)
 {
-	uint8_t active_count = 0;
+	uint8_t added_count = 0;
 	uint8_t i;
 
 	for (i = 0; i < MAX_NUM_OF_DISPLAYS; i++)
 		if (is_display_active(&hdcp->displays[i]))
-			active_count++;
-	return active_count;
+			added_count++;
+	return added_count;
 }
 
-static inline struct mod_hdcp_display *get_first_active_display(
+static inline uint8_t get_added_display_count(struct mod_hdcp *hdcp)
+{
+	uint8_t added_count = 0;
+	uint8_t i;
+
+	for (i = 0; i < MAX_NUM_OF_DISPLAYS; i++)
+		if (is_display_added(&hdcp->displays[i]))
+			added_count++;
+	return added_count;
+}
+
+static inline struct mod_hdcp_display *get_first_added_display(
 		struct mod_hdcp *hdcp)
 {
 	uint8_t i;
 	struct mod_hdcp_display *display = NULL;
 
 	for (i = 0; i < MAX_NUM_OF_DISPLAYS; i++)
-		if (is_display_active(&hdcp->displays[i])) {
+		if (is_display_added(&hdcp->displays[i])) {
 			display = &hdcp->displays[i];
 			break;
 		}
diff --git a/drivers/gpu/drm/amd/display/modules/hdcp/hdcp1_execution.c b/drivers/gpu/drm/amd/display/modules/hdcp/hdcp1_execution.c
index f244b72..37c8c05 100644
--- a/drivers/gpu/drm/amd/display/modules/hdcp/hdcp1_execution.c
+++ b/drivers/gpu/drm/amd/display/modules/hdcp/hdcp1_execution.c
@@ -129,7 +129,7 @@ static inline uint8_t get_device_count(struct mod_hdcp *hdcp)
 static inline enum mod_hdcp_status check_device_count(struct mod_hdcp *hdcp)
 {
 	/* device count must be greater than or equal to tracked hdcp displays */
-	return (get_device_count(hdcp) < get_active_display_count(hdcp)) ?
+	return (get_device_count(hdcp) < get_added_display_count(hdcp)) ?
 			MOD_HDCP_STATUS_HDCP1_DEVICE_COUNT_MISMATCH_FAILURE :
 			MOD_HDCP_STATUS_SUCCESS;
 }
diff --git a/drivers/gpu/drm/amd/display/modules/hdcp/hdcp2_execution.c b/drivers/gpu/drm/amd/display/modules/hdcp/hdcp2_execution.c
index 549c113..491c00f 100644
--- a/drivers/gpu/drm/amd/display/modules/hdcp/hdcp2_execution.c
+++ b/drivers/gpu/drm/amd/display/modules/hdcp/hdcp2_execution.c
@@ -208,7 +208,7 @@ static inline uint8_t get_device_count(struct mod_hdcp *hdcp)
 static enum mod_hdcp_status check_device_count(struct mod_hdcp *hdcp)
 {
 	/* device count must be greater than or equal to tracked hdcp displays */
-	return (get_device_count(hdcp) < get_active_display_count(hdcp)) ?
+	return (get_device_count(hdcp) < get_added_display_count(hdcp)) ?
 			MOD_HDCP_STATUS_HDCP2_DEVICE_COUNT_MISMATCH_FAILURE :
 			MOD_HDCP_STATUS_SUCCESS;
 }
diff --git a/drivers/gpu/drm/amd/display/modules/hdcp/hdcp_psp.c b/drivers/gpu/drm/amd/display/modules/hdcp/hdcp_psp.c
index 836e479..c292981 100644
--- a/drivers/gpu/drm/amd/display/modules/hdcp/hdcp_psp.c
+++ b/drivers/gpu/drm/amd/display/modules/hdcp/hdcp_psp.c
@@ -54,7 +54,7 @@ enum mod_hdcp_status mod_hdcp_remove_display_from_topology(
 
 	dtm_cmd = (struct ta_dtm_shared_memory *)psp->dtm_context.dtm_shared_buf;
 
-	if (!display || !is_display_active(display))
+	if (!display || !is_display_added(display))
 		return MOD_HDCP_STATUS_DISPLAY_NOT_FOUND;
 
 	memset(dtm_cmd, 0, sizeof(struct ta_dtm_shared_memory));
@@ -73,21 +73,25 @@ enum mod_hdcp_status mod_hdcp_remove_display_from_topology(
 	HDCP_TOP_REMOVE_DISPLAY_TRACE(hdcp, display->index);
  
  	return MOD_HDCP_STATUS_SUCCESS;
- }
-
-enum mod_hdcp_status mod_hdcp_add_display_to_topology(
-		struct mod_hdcp *hdcp, struct mod_hdcp_display *display)
+ 
+}
+enum mod_hdcp_status mod_hdcp_add_display_to_topology(struct mod_hdcp *hdcp,
+						      uint8_t index)
 {
 	struct psp_context *psp = hdcp->config.psp.handle;
 	struct ta_dtm_shared_memory *dtm_cmd;
+	struct mod_hdcp_display *display =
+			get_active_display_at_index(hdcp, index);
 	struct mod_hdcp_link *link = &hdcp->connection.link;
 
 	if (!psp->dtm_context.dtm_initialized) {
 		DRM_ERROR("Failed to add display topology, DTM TA is not initialized.");
-		display->state = MOD_HDCP_DISPLAY_INACTIVE;
 		return MOD_HDCP_STATUS_FAILURE;
 	}
 
+	if (!display || is_display_added(display))
+		return MOD_HDCP_STATUS_UPDATE_TOPOLOGY_FAILURE;
+
 	dtm_cmd = (struct ta_dtm_shared_memory *)psp->dtm_context.dtm_shared_buf;
 
 	memset(dtm_cmd, 0, sizeof(struct ta_dtm_shared_memory));
@@ -109,11 +113,10 @@ enum mod_hdcp_status mod_hdcp_add_display_to_topology(
 
 	psp_dtm_invoke(psp, dtm_cmd->cmd_id);
 
-	if (dtm_cmd->dtm_status != TA_DTM_STATUS__SUCCESS) {
-		display->state = MOD_HDCP_DISPLAY_INACTIVE;
+	if (dtm_cmd->dtm_status != TA_DTM_STATUS__SUCCESS)
 		return MOD_HDCP_STATUS_UPDATE_TOPOLOGY_FAILURE;
-	}
 
+	display->state = MOD_HDCP_DISPLAY_ACTIVE_AND_ADDED;
 	HDCP_TOP_ADD_DISPLAY_TRACE(hdcp, display->index);
 
 	return MOD_HDCP_STATUS_SUCCESS;
@@ -123,7 +126,7 @@ enum mod_hdcp_status mod_hdcp_hdcp1_create_session(struct mod_hdcp *hdcp)
 {
 
 	struct psp_context *psp = hdcp->config.psp.handle;
-	struct mod_hdcp_display *display = get_first_active_display(hdcp);
+	struct mod_hdcp_display *display = get_first_added_display(hdcp);
 	struct ta_hdcp_shared_memory *hdcp_cmd;
 
 	if (!psp->hdcp_context.hdcp_initialized) {
@@ -176,7 +179,7 @@ enum mod_hdcp_status mod_hdcp_hdcp1_destroy_session(struct mod_hdcp *hdcp)
 		if (is_display_encryption_enabled(
 				&hdcp->displays[i])) {
 			hdcp->displays[i].state =
-								MOD_HDCP_DISPLAY_ACTIVE;
+					MOD_HDCP_DISPLAY_ACTIVE_AND_ADDED;
 			HDCP_HDCP1_DISABLED_TRACE(hdcp,
 					hdcp->displays[i].index);
 		}
@@ -228,7 +231,7 @@ enum mod_hdcp_status mod_hdcp_hdcp1_enable_encryption(struct mod_hdcp *hdcp)
 {
 	struct psp_context *psp = hdcp->config.psp.handle;
 	struct ta_hdcp_shared_memory *hdcp_cmd;
-	struct mod_hdcp_display *display = get_first_active_display(hdcp);
+	struct mod_hdcp_display *display = get_first_added_display(hdcp);
 
 	hdcp_cmd = (struct ta_hdcp_shared_memory *)psp->hdcp_context.hdcp_shared_buf;
 	memset(hdcp_cmd, 0, sizeof(struct ta_hdcp_shared_memory));
@@ -298,7 +301,8 @@ enum mod_hdcp_status mod_hdcp_hdcp1_enable_dp_stream_encryption(struct mod_hdcp
 
 	for (i = 0; i < MAX_NUM_OF_DISPLAYS; i++) {
 
-		if (hdcp->displays[i].adjust.disable)
+		if (hdcp->displays[i].state != MOD_HDCP_DISPLAY_ACTIVE_AND_ADDED ||
+		    hdcp->displays[i].adjust.disable)
 			continue;
 
 		memset(hdcp_cmd, 0, sizeof(struct ta_hdcp_shared_memory));
@@ -360,7 +364,7 @@ enum mod_hdcp_status mod_hdcp_hdcp2_create_session(struct mod_hdcp *hdcp)
 {
 	struct psp_context *psp = hdcp->config.psp.handle;
 	struct ta_hdcp_shared_memory *hdcp_cmd;
-	struct mod_hdcp_display *display = get_first_active_display(hdcp);
+	struct mod_hdcp_display *display = get_first_added_display(hdcp);
 
 	if (!psp->hdcp_context.hdcp_initialized) {
 		DRM_ERROR("Failed to create hdcp session, HDCP TA is not initialized");
@@ -419,7 +423,7 @@ enum mod_hdcp_status mod_hdcp_hdcp2_destroy_session(struct mod_hdcp *hdcp)
 		if (is_display_encryption_enabled(
 				&hdcp->displays[i])) {
 			hdcp->displays[i].state =
-								MOD_HDCP_DISPLAY_ACTIVE;
+					MOD_HDCP_DISPLAY_ACTIVE_AND_ADDED;
 			HDCP_HDCP2_DISABLED_TRACE(hdcp,
 					hdcp->displays[i].index);
 		}
@@ -658,7 +662,7 @@ enum mod_hdcp_status mod_hdcp_hdcp2_enable_encryption(struct mod_hdcp *hdcp)
 {
 	struct psp_context *psp = hdcp->config.psp.handle;
 	struct ta_hdcp_shared_memory *hdcp_cmd;
-	struct mod_hdcp_display *display = get_first_active_display(hdcp);
+	struct mod_hdcp_display *display = get_first_added_display(hdcp);
 
 	hdcp_cmd = (struct ta_hdcp_shared_memory *)psp->hdcp_context.hdcp_shared_buf;
 	memset(hdcp_cmd, 0, sizeof(struct ta_hdcp_shared_memory));
@@ -743,7 +747,8 @@ enum mod_hdcp_status mod_hdcp_hdcp2_enable_dp_stream_encryption(struct mod_hdcp
 
 
 	for (i = 0; i < MAX_NUM_OF_DISPLAYS; i++) {
-		if (hdcp->displays[i].adjust.disable)
+		if (hdcp->displays[i].state != MOD_HDCP_DISPLAY_ACTIVE_AND_ADDED ||
+		    hdcp->displays[i].adjust.disable)
 			continue;
 		hdcp_cmd->in_msg.hdcp2_enable_dp_stream_encryption.display_handle = hdcp->displays[i].index;
 		hdcp_cmd->in_msg.hdcp2_enable_dp_stream_encryption.session_handle = hdcp->auth.id;
diff --git a/drivers/gpu/drm/amd/display/modules/inc/mod_hdcp.h b/drivers/gpu/drm/amd/display/modules/inc/mod_hdcp.h
index eae9309..c088602 100644
--- a/drivers/gpu/drm/amd/display/modules/inc/mod_hdcp.h
+++ b/drivers/gpu/drm/amd/display/modules/inc/mod_hdcp.h
@@ -117,6 +117,7 @@ enum mod_hdcp_operation_mode {
 enum mod_hdcp_display_state {
 	MOD_HDCP_DISPLAY_INACTIVE = 0,
 	MOD_HDCP_DISPLAY_ACTIVE,
+	MOD_HDCP_DISPLAY_ACTIVE_AND_ADDED,
 	MOD_HDCP_DISPLAY_ENCRYPTION_ENABLED
 };
 
diff --git a/drivers/gpu/drm/amd/powerplay/amd_powerplay.c b/drivers/gpu/drm/amd/powerplay/amd_powerplay.c
index c195575..2a12614 100644
--- a/drivers/gpu/drm/amd/powerplay/amd_powerplay.c
+++ b/drivers/gpu/drm/amd/powerplay/amd_powerplay.c
@@ -1452,7 +1452,8 @@ static int pp_get_asic_baco_state(void *handle, int *state)
 	if (!hwmgr)
 		return -EINVAL;
 
-	if (!hwmgr->pm_en || !hwmgr->hwmgr_func->get_asic_baco_state)
+	if (!(hwmgr->not_vf && amdgpu_dpm) ||
+		!hwmgr->hwmgr_func->get_asic_baco_state)
 		return 0;
 
 	mutex_lock(&hwmgr->smu_lock);
diff --git a/drivers/gpu/drm/amd/powerplay/arcturus_ppt.c b/drivers/gpu/drm/amd/powerplay/arcturus_ppt.c
index c6d3bef..1ef0923 100644
--- a/drivers/gpu/drm/amd/powerplay/arcturus_ppt.c
+++ b/drivers/gpu/drm/amd/powerplay/arcturus_ppt.c
@@ -35,6 +35,7 @@
 #include "arcturus_ppt.h"
 #include "smu_v11_0_pptable.h"
 #include "arcturus_ppsmc.h"
+#include "nbio/nbio_7_4_offset.h"
 #include "nbio/nbio_7_4_sh_mask.h"
 #include "amdgpu_xgmi.h"
 #include <linux/i2c.h>
@@ -793,8 +794,21 @@ static int arcturus_force_clk_levels(struct smu_context *smu,
 	struct arcturus_dpm_table *dpm_table;
 	struct arcturus_single_dpm_table *single_dpm_table;
 	uint32_t soft_min_level, soft_max_level;
+	uint32_t smu_version;
 	int ret = 0;
 
+	ret = smu_get_smc_version(smu, NULL, &smu_version);
+	if (ret) {
+		pr_err("Failed to get smu version!\n");
+		return ret;
+	}
+
+	if (smu_version >= 0x361200) {
+		pr_err("Forcing clock level is not supported with "
+		       "54.18 and onwards SMU firmwares\n");
+		return -EOPNOTSUPP;
+	}
+
 	soft_min_level = mask ? (ffs(mask) - 1) : 0;
 	soft_max_level = mask ? (fls(mask) - 1) : 0;
 
@@ -1511,6 +1525,38 @@ static int arcturus_set_power_profile_mode(struct smu_context *smu,
 	return 0;
 }
 
+static int arcturus_set_performance_level(struct smu_context *smu,
+					  enum amd_dpm_forced_level level)
+{
+	uint32_t smu_version;
+	int ret;
+
+	ret = smu_get_smc_version(smu, NULL, &smu_version);
+	if (ret) {
+		pr_err("Failed to get smu version!\n");
+		return ret;
+	}
+
+	switch (level) {
+	case AMD_DPM_FORCED_LEVEL_HIGH:
+	case AMD_DPM_FORCED_LEVEL_LOW:
+	case AMD_DPM_FORCED_LEVEL_PROFILE_STANDARD:
+	case AMD_DPM_FORCED_LEVEL_PROFILE_MIN_SCLK:
+	case AMD_DPM_FORCED_LEVEL_PROFILE_MIN_MCLK:
+	case AMD_DPM_FORCED_LEVEL_PROFILE_PEAK:
+		if (smu_version >= 0x361200) {
+			pr_err("Forcing clock level is not supported with "
+			       "54.18 and onwards SMU firmwares\n");
+			return -EOPNOTSUPP;
+		}
+		break;
+	default:
+		break;
+	}
+
+	return smu_v11_0_set_performance_level(smu, level);
+}
+
 static void arcturus_dump_pptable(struct smu_context *smu)
 {
 	struct smu_table_context *table_context = &smu->smu_table;
@@ -2210,6 +2256,18 @@ static void arcturus_i2c_eeprom_control_fini(struct i2c_adapter *control)
 	i2c_del_adapter(control);
 }
 
+static bool arcturus_is_baco_supported(struct smu_context *smu)
+{
+	struct amdgpu_device *adev = smu->adev;
+	uint32_t val;
+
+	if (!smu_v11_0_baco_is_support(smu))
+		return false;
+
+	val = RREG32_SOC15(NBIO, 0, mmRCC_BIF_STRAP0);
+	return (val & RCC_BIF_STRAP0__STRAP_PX_CAPABLE_MASK) ? true : false;
+}
+
 static uint32_t arcturus_get_pptable_power_limit(struct smu_context *smu)
 {
 	PPTable_t *pptable = smu->smu_table.driver_pptable;
@@ -2272,7 +2330,7 @@ static const struct pptable_funcs arcturus_ppt_funcs = {
 	.get_profiling_clk_mask = arcturus_get_profiling_clk_mask,
 	.get_power_profile_mode = arcturus_get_power_profile_mode,
 	.set_power_profile_mode = arcturus_set_power_profile_mode,
-	.set_performance_level = smu_v11_0_set_performance_level,
+	.set_performance_level = arcturus_set_performance_level,
 	/* debug (internal used) */
 	.dump_pptable = arcturus_dump_pptable,
 	.get_power_limit = arcturus_get_power_limit,
@@ -2321,7 +2379,7 @@ static const struct pptable_funcs arcturus_ppt_funcs = {
 	.register_irq_handler = smu_v11_0_register_irq_handler,
 	.set_azalia_d3_pme = smu_v11_0_set_azalia_d3_pme,
 	.get_max_sustainable_clocks_by_dc = smu_v11_0_get_max_sustainable_clocks_by_dc,
-	.baco_is_support= smu_v11_0_baco_is_support,
+	.baco_is_support= arcturus_is_baco_supported,
 	.baco_get_state = smu_v11_0_baco_get_state,
 	.baco_set_state = smu_v11_0_baco_set_state,
 	.baco_enter = smu_v11_0_baco_enter,
diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c
index 7740488..4795eb6 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c
@@ -3804,9 +3804,12 @@ static int smu7_trim_single_dpm_states(struct pp_hwmgr *hwmgr,
 {
 	uint32_t i;
 
+	/* force the trim if mclk_switching is disabled to prevent flicker */
+	bool force_trim = (low_limit == high_limit);
 	for (i = 0; i < dpm_table->count; i++) {
 	/*skip the trim if od is enabled*/
-		if (!hwmgr->od_enabled && (dpm_table->dpm_levels[i].value < low_limit
+		if ((!hwmgr->od_enabled || force_trim)
+			&& (dpm_table->dpm_levels[i].value < low_limit
 			|| dpm_table->dpm_levels[i].value > high_limit))
 			dpm_table->dpm_levels[i].enabled = false;
 		else
diff --git a/drivers/gpu/drm/amd/powerplay/navi10_ppt.c b/drivers/gpu/drm/amd/powerplay/navi10_ppt.c
index 9c60b38a..1503028 100644
--- a/drivers/gpu/drm/amd/powerplay/navi10_ppt.c
+++ b/drivers/gpu/drm/amd/powerplay/navi10_ppt.c
@@ -28,13 +28,15 @@
 #include "smu_internal.h"
 #include "atomfirmware.h"
 #include "amdgpu_atomfirmware.h"
+#include "soc15_common.h"
 #include "smu_v11_0.h"
 #include "smu11_driver_if_navi10.h"
 #include "atom.h"
 #include "navi10_ppt.h"
 #include "smu_v11_0_pptable.h"
 #include "smu_v11_0_ppsmc.h"
-#include "nbio/nbio_7_4_sh_mask.h"
+#include "nbio/nbio_2_3_offset.h"
+#include "nbio/nbio_2_3_sh_mask.h"
 
 #include "asic_reg/mp/mp_11_0_sh_mask.h"
 
@@ -1985,6 +1987,18 @@ static int navi10_setup_od_limits(struct smu_context *smu) {
 	return 0;
 }
 
+static bool navi10_is_baco_supported(struct smu_context *smu)
+{
+	struct amdgpu_device *adev = smu->adev;
+	uint32_t val;
+
+	if (!smu_v11_0_baco_is_support(smu))
+		return false;
+
+	val = RREG32_SOC15(NBIO, 0, mmRCC_BIF_STRAP0);
+	return (val & RCC_BIF_STRAP0__STRAP_PX_CAPABLE_MASK) ? true : false;
+}
+
 static int navi10_set_default_od_settings(struct smu_context *smu, bool initialize) {
 	OverDriveTable_t *od_table, *boot_od_table;
 	int ret = 0;
@@ -2361,7 +2375,7 @@ static const struct pptable_funcs navi10_ppt_funcs = {
 	.register_irq_handler = smu_v11_0_register_irq_handler,
 	.set_azalia_d3_pme = smu_v11_0_set_azalia_d3_pme,
 	.get_max_sustainable_clocks_by_dc = smu_v11_0_get_max_sustainable_clocks_by_dc,
-	.baco_is_support= smu_v11_0_baco_is_support,
+	.baco_is_support= navi10_is_baco_supported,
 	.baco_get_state = smu_v11_0_baco_get_state,
 	.baco_set_state = smu_v11_0_baco_set_state,
 	.baco_enter = smu_v11_0_baco_enter,
diff --git a/drivers/gpu/drm/amd/powerplay/renoir_ppt.c b/drivers/gpu/drm/amd/powerplay/renoir_ppt.c
index 7bf52ec..ff73a73 100644
--- a/drivers/gpu/drm/amd/powerplay/renoir_ppt.c
+++ b/drivers/gpu/drm/amd/powerplay/renoir_ppt.c
@@ -239,6 +239,7 @@ static int renoir_print_clk_levels(struct smu_context *smu,
 	uint32_t cur_value = 0, value = 0, count = 0, min = 0, max = 0;
 	DpmClocks_t *clk_table = smu->smu_table.clocks_table;
 	SmuMetrics_t metrics;
+	bool cur_value_match_level = false;
 
 	if (!clk_table || clk_type >= SMU_CLK_COUNT)
 		return -EINVAL;
@@ -297,8 +298,13 @@ static int renoir_print_clk_levels(struct smu_context *smu,
 		GET_DPM_CUR_FREQ(clk_table, clk_type, i, value);
 		size += sprintf(buf + size, "%d: %uMhz %s\n", i, value,
 				cur_value == value ? "*" : "");
+		if (cur_value == value)
+			cur_value_match_level = true;
 	}
 
+	if (!cur_value_match_level)
+		size += sprintf(buf + size, "   %uMhz *\n", cur_value);
+
 	return size;
 }
 
@@ -887,6 +893,17 @@ static int renoir_read_sensor(struct smu_context *smu,
 	return ret;
 }
 
+static bool renoir_is_dpm_running(struct smu_context *smu)
+{
+	/*
+	 * Util now, the pmfw hasn't exported the interface of SMU
+	 * feature mask to APU SKU so just force on all the feature
+	 * at early initial stage.
+	 */
+	return true;
+
+}
+
 static const struct pptable_funcs renoir_ppt_funcs = {
 	.get_smu_msg_index = renoir_get_smu_msg_index,
 	.get_smu_clk_index = renoir_get_smu_clk_index,
@@ -927,6 +944,7 @@ static const struct pptable_funcs renoir_ppt_funcs = {
 	.mode2_reset = smu_v12_0_mode2_reset,
 	.set_soft_freq_limited_range = smu_v12_0_set_soft_freq_limited_range,
 	.set_driver_table_location = smu_v12_0_set_driver_table_location,
+	.is_dpm_running = renoir_is_dpm_running,
 };
 
 void renoir_set_ppt_funcs(struct smu_context *smu)
diff --git a/drivers/gpu/drm/amd/powerplay/renoir_ppt.h b/drivers/gpu/drm/amd/powerplay/renoir_ppt.h
index 2a390dd..89cd6da 100644
--- a/drivers/gpu/drm/amd/powerplay/renoir_ppt.h
+++ b/drivers/gpu/drm/amd/powerplay/renoir_ppt.h
@@ -37,7 +37,7 @@ extern void renoir_set_ppt_funcs(struct smu_context *smu);
 			freq = table->SocClocks[dpm_level].Freq;	\
 			break;						\
 		case SMU_MCLK:						\
-			freq = table->MemClocks[dpm_level].Freq;	\
+			freq = table->FClocks[dpm_level].Freq;	\
 			break;						\
 		case SMU_DCEFCLK:					\
 			freq = table->DcfClocks[dpm_level].Freq;	\
diff --git a/drivers/gpu/drm/amd/powerplay/smu_v11_0.c b/drivers/gpu/drm/amd/powerplay/smu_v11_0.c
index d19e1d0..655ba4f 100644
--- a/drivers/gpu/drm/amd/powerplay/smu_v11_0.c
+++ b/drivers/gpu/drm/amd/powerplay/smu_v11_0.c
@@ -42,8 +42,6 @@
 #include "asic_reg/thm/thm_11_0_2_sh_mask.h"
 #include "asic_reg/mp/mp_11_0_offset.h"
 #include "asic_reg/mp/mp_11_0_sh_mask.h"
-#include "asic_reg/nbio/nbio_7_4_offset.h"
-#include "asic_reg/nbio/nbio_7_4_sh_mask.h"
 #include "asic_reg/smuio/smuio_11_0_0_offset.h"
 #include "asic_reg/smuio/smuio_11_0_0_sh_mask.h"
 
@@ -1662,9 +1660,7 @@ static int smu_v11_0_baco_set_armd3_sequence(struct smu_context *smu, enum smu_v
 
 bool smu_v11_0_baco_is_support(struct smu_context *smu)
 {
-	struct amdgpu_device *adev = smu->adev;
 	struct smu_baco_context *smu_baco = &smu->smu_baco;
-	uint32_t val;
 	bool baco_support;
 
 	mutex_lock(&smu_baco->mutex);
@@ -1679,11 +1675,7 @@ bool smu_v11_0_baco_is_support(struct smu_context *smu)
 	   !smu_feature_is_enabled(smu, SMU_FEATURE_BACO_BIT))
 		return false;
 
-	val = RREG32_SOC15(NBIO, 0, mmRCC_BIF_STRAP0);
-	if (val & RCC_BIF_STRAP0__STRAP_PX_CAPABLE_MASK)
-		return true;
-
-	return false;
+	return true;
 }
 
 enum smu_baco_state smu_v11_0_baco_get_state(struct smu_context *smu)
@@ -1700,11 +1692,9 @@ enum smu_baco_state smu_v11_0_baco_get_state(struct smu_context *smu)
 
 int smu_v11_0_baco_set_state(struct smu_context *smu, enum smu_baco_state state)
 {
-
 	struct smu_baco_context *smu_baco = &smu->smu_baco;
 	struct amdgpu_device *adev = smu->adev;
 	struct amdgpu_ras *ras = amdgpu_ras_get_context(adev);
-	uint32_t bif_doorbell_intr_cntl;
 	uint32_t data;
 	int ret = 0;
 
@@ -1713,14 +1703,7 @@ int smu_v11_0_baco_set_state(struct smu_context *smu, enum smu_baco_state state)
 
 	mutex_lock(&smu_baco->mutex);
 
-	bif_doorbell_intr_cntl = RREG32_SOC15(NBIO, 0, mmBIF_DOORBELL_INT_CNTL);
-
 	if (state == SMU_BACO_STATE_ENTER) {
-		bif_doorbell_intr_cntl = REG_SET_FIELD(bif_doorbell_intr_cntl,
-						BIF_DOORBELL_INT_CNTL,
-						DOORBELL_INTERRUPT_DISABLE, 1);
-		WREG32_SOC15(NBIO, 0, mmBIF_DOORBELL_INT_CNTL, bif_doorbell_intr_cntl);
-
 		if (!ras || !ras->supported) {
 			data = RREG32_SOC15(THM, 0, mmTHM_BACO_CNTL);
 			data |= 0x80000000;
@@ -1735,10 +1718,11 @@ int smu_v11_0_baco_set_state(struct smu_context *smu, enum smu_baco_state state)
 		if (ret)
 			goto out;
 
-		bif_doorbell_intr_cntl = REG_SET_FIELD(bif_doorbell_intr_cntl,
-						BIF_DOORBELL_INT_CNTL,
-						DOORBELL_INTERRUPT_DISABLE, 0);
-		WREG32_SOC15(NBIO, 0, mmBIF_DOORBELL_INT_CNTL, bif_doorbell_intr_cntl);
+		if (ras && ras->supported) {
+			ret = smu_send_smc_msg(smu, SMU_MSG_PrepareMp1ForUnload, NULL);
+			if (ret)
+				goto out;
+		}
 
 		/* clear vbios scratch 6 and 7 for coming asic reinit */
 		WREG32(adev->bios_scratch_reg_offset + 6, 0);
diff --git a/drivers/gpu/drm/amd/powerplay/vega20_ppt.c b/drivers/gpu/drm/amd/powerplay/vega20_ppt.c
index 49ff375..3f10443 100644
--- a/drivers/gpu/drm/amd/powerplay/vega20_ppt.c
+++ b/drivers/gpu/drm/amd/powerplay/vega20_ppt.c
@@ -35,6 +35,7 @@
 #include "vega20_ppt.h"
 #include "vega20_pptable.h"
 #include "vega20_ppsmc.h"
+#include "nbio/nbio_7_4_offset.h"
 #include "nbio/nbio_7_4_sh_mask.h"
 #include "asic_reg/thm/thm_11_0_2_offset.h"
 #include "asic_reg/thm/thm_11_0_2_sh_mask.h"
@@ -3174,6 +3175,17 @@ static int vega20_update_pcie_parameters(struct smu_context *smu,
 	return ret;
 }
 
+static bool vega20_is_baco_supported(struct smu_context *smu)
+{
+	struct amdgpu_device *adev = smu->adev;
+	uint32_t val;
+
+	if (!smu_v11_0_baco_is_support(smu))
+		return false;
+
+	val = RREG32_SOC15(NBIO, 0, mmRCC_BIF_STRAP0);
+	return (val & RCC_BIF_STRAP0__STRAP_PX_CAPABLE_MASK) ? true : false;
+}
 
 static const struct pptable_funcs vega20_ppt_funcs = {
 	.tables_init = vega20_tables_init,
@@ -3262,7 +3274,7 @@ static const struct pptable_funcs vega20_ppt_funcs = {
 	.register_irq_handler = smu_v11_0_register_irq_handler,
 	.set_azalia_d3_pme = smu_v11_0_set_azalia_d3_pme,
 	.get_max_sustainable_clocks_by_dc = smu_v11_0_get_max_sustainable_clocks_by_dc,
-	.baco_is_support= smu_v11_0_baco_is_support,
+	.baco_is_support= vega20_is_baco_supported,
 	.baco_get_state = smu_v11_0_baco_get_state,
 	.baco_set_state = smu_v11_0_baco_set_state,
 	.baco_enter = smu_v11_0_baco_enter,
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 9ded2ce..76736fb 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -1652,8 +1652,7 @@ static ssize_t analogix_dpaux_transfer(struct drm_dp_aux *aux,
 }
 
 struct analogix_dp_device *
-analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
-		 struct analogix_dp_plat_data *plat_data)
+analogix_dp_probe(struct device *dev, struct analogix_dp_plat_data *plat_data)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct analogix_dp_device *dp;
@@ -1756,22 +1755,30 @@ analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
 					irq_flags, "analogix-dp", dp);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to request irq\n");
-		goto err_disable_pm_runtime;
+		return ERR_PTR(ret);
 	}
 	disable_irq(dp->irq);
 
+	return dp;
+}
+EXPORT_SYMBOL_GPL(analogix_dp_probe);
+
+int analogix_dp_bind(struct analogix_dp_device *dp, struct drm_device *drm_dev)
+{
+	int ret;
+
 	dp->drm_dev = drm_dev;
 	dp->encoder = dp->plat_data->encoder;
 
 	dp->aux.name = "DP-AUX";
 	dp->aux.transfer = analogix_dpaux_transfer;
-	dp->aux.dev = &pdev->dev;
+	dp->aux.dev = dp->dev;
 
 	ret = drm_dp_aux_register(&dp->aux);
 	if (ret)
-		return ERR_PTR(ret);
+		return ret;
 
-	pm_runtime_enable(dev);
+	pm_runtime_enable(dp->dev);
 
 	ret = analogix_dp_create_bridge(drm_dev, dp);
 	if (ret) {
@@ -1779,13 +1786,12 @@ analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
 		goto err_disable_pm_runtime;
 	}
 
-	return dp;
+	return 0;
 
 err_disable_pm_runtime:
+	pm_runtime_disable(dp->dev);
 
-	pm_runtime_disable(dev);
-
-	return ERR_PTR(ret);
+	return ret;
 }
 EXPORT_SYMBOL_GPL(analogix_dp_bind);
 
@@ -1802,10 +1808,15 @@ void analogix_dp_unbind(struct analogix_dp_device *dp)
 
 	drm_dp_aux_unregister(&dp->aux);
 	pm_runtime_disable(dp->dev);
-	clk_disable_unprepare(dp->clock);
 }
 EXPORT_SYMBOL_GPL(analogix_dp_unbind);
 
+void analogix_dp_remove(struct analogix_dp_device *dp)
+{
+	clk_disable_unprepare(dp->clock);
+}
+EXPORT_SYMBOL_GPL(analogix_dp_remove);
+
 #ifdef CONFIG_PM
 int analogix_dp_suspend(struct analogix_dp_device *dp)
 {
diff --git a/drivers/gpu/drm/drm_file.c b/drivers/gpu/drm/drm_file.c
index c4c704e..eb009d3 100644
--- a/drivers/gpu/drm/drm_file.c
+++ b/drivers/gpu/drm/drm_file.c
@@ -48,6 +48,11 @@
 #include "drm_internal.h"
 #include "drm_legacy.h"
 
+#if defined(CONFIG_MMU) && defined(CONFIG_TRANSPARENT_HUGEPAGE)
+#include <uapi/asm/mman.h>
+#include <drm/drm_vma_manager.h>
+#endif
+
 /* from BKL pushdown */
 DEFINE_MUTEX(drm_global_mutex);
 
@@ -872,3 +877,139 @@ struct file *mock_drm_getfile(struct drm_minor *minor, unsigned int flags)
 	return file;
 }
 EXPORT_SYMBOL_FOR_TESTS_ONLY(mock_drm_getfile);
+
+#ifdef CONFIG_MMU
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+/*
+ * drm_addr_inflate() attempts to construct an aligned area by inflating
+ * the area size and skipping the unaligned start of the area.
+ * adapted from shmem_get_unmapped_area()
+ */
+static unsigned long drm_addr_inflate(unsigned long addr,
+				      unsigned long len,
+				      unsigned long pgoff,
+				      unsigned long flags,
+				      unsigned long huge_size)
+{
+	unsigned long offset, inflated_len;
+	unsigned long inflated_addr;
+	unsigned long inflated_offset;
+
+	offset = (pgoff << PAGE_SHIFT) & (huge_size - 1);
+	if (offset && offset + len < 2 * huge_size)
+		return addr;
+	if ((addr & (huge_size - 1)) == offset)
+		return addr;
+
+	inflated_len = len + huge_size - PAGE_SIZE;
+	if (inflated_len > TASK_SIZE)
+		return addr;
+	if (inflated_len < len)
+		return addr;
+
+	inflated_addr = current->mm->get_unmapped_area(NULL, 0, inflated_len,
+						       0, flags);
+	if (IS_ERR_VALUE(inflated_addr))
+		return addr;
+	if (inflated_addr & ~PAGE_MASK)
+		return addr;
+
+	inflated_offset = inflated_addr & (huge_size - 1);
+	inflated_addr += offset - inflated_offset;
+	if (inflated_offset > offset)
+		inflated_addr += huge_size;
+
+	if (inflated_addr > TASK_SIZE - len)
+		return addr;
+
+	return inflated_addr;
+}
+
+/**
+ * drm_get_unmapped_area() - Get an unused user-space virtual memory area
+ * suitable for huge page table entries.
+ * @file: The struct file representing the address space being mmap()'d.
+ * @uaddr: Start address suggested by user-space.
+ * @len: Length of the area.
+ * @pgoff: The page offset into the address space.
+ * @flags: mmap flags
+ * @mgr: The address space manager used by the drm driver. This argument can
+ * probably be removed at some point when all drivers use the same
+ * address space manager.
+ *
+ * This function attempts to find an unused user-space virtual memory area
+ * that can accommodate the size we want to map, and that is properly
+ * aligned to facilitate huge page table entries matching actual
+ * huge pages or huge page aligned memory in buffer objects. Buffer objects
+ * are assumed to start at huge page boundary pfns (io memory) or be
+ * populated by huge pages aligned to the start of the buffer object
+ * (system- or coherent memory). Adapted from shmem_get_unmapped_area.
+ *
+ * Return: aligned user-space address.
+ */
+unsigned long drm_get_unmapped_area(struct file *file,
+				    unsigned long uaddr, unsigned long len,
+				    unsigned long pgoff, unsigned long flags,
+				    struct drm_vma_offset_manager *mgr)
+{
+	unsigned long addr;
+	unsigned long inflated_addr;
+	struct drm_vma_offset_node *node;
+
+	if (len > TASK_SIZE)
+		return -ENOMEM;
+
+	/*
+	 * @pgoff is the file page-offset the huge page boundaries of
+	 * which typically aligns to physical address huge page boundaries.
+	 * That's not true for DRM, however, where physical address huge
+	 * page boundaries instead are aligned with the offset from
+	 * buffer object start. So adjust @pgoff to be the offset from
+	 * buffer object start.
+	 */
+	drm_vma_offset_lock_lookup(mgr);
+	node = drm_vma_offset_lookup_locked(mgr, pgoff, 1);
+	if (node)
+		pgoff -= node->vm_node.start;
+	drm_vma_offset_unlock_lookup(mgr);
+
+	addr = current->mm->get_unmapped_area(file, uaddr, len, pgoff, flags);
+	if (IS_ERR_VALUE(addr))
+		return addr;
+	if (addr & ~PAGE_MASK)
+		return addr;
+	if (addr > TASK_SIZE - len)
+		return addr;
+
+	if (len < HPAGE_PMD_SIZE)
+		return addr;
+	if (flags & MAP_FIXED)
+		return addr;
+	/*
+	 * Our priority is to support MAP_SHARED mapped hugely;
+	 * and support MAP_PRIVATE mapped hugely too, until it is COWed.
+	 * But if caller specified an address hint, respect that as before.
+	 */
+	if (uaddr)
+		return addr;
+
+	inflated_addr = drm_addr_inflate(addr, len, pgoff, flags,
+					 HPAGE_PMD_SIZE);
+
+	if (IS_ENABLED(CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD) &&
+	    len >= HPAGE_PUD_SIZE)
+		inflated_addr = drm_addr_inflate(inflated_addr, len, pgoff,
+						 flags, HPAGE_PUD_SIZE);
+	return inflated_addr;
+}
+#else /* CONFIG_TRANSPARENT_HUGEPAGE */
+unsigned long drm_get_unmapped_area(struct file *file,
+				    unsigned long uaddr, unsigned long len,
+				    unsigned long pgoff, unsigned long flags,
+				    struct drm_vma_offset_manager *mgr)
+{
+	return current->mm->get_unmapped_area(file, uaddr, len, pgoff, flags);
+}
+#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
+EXPORT_SYMBOL_GPL(drm_get_unmapped_area);
+#endif /* CONFIG_MMU */
diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c
index bc6e208..8981abe 100644
--- a/drivers/gpu/drm/drm_mm.c
+++ b/drivers/gpu/drm/drm_mm.c
@@ -45,7 +45,6 @@
 #include <linux/export.h>
 #include <linux/interval_tree_generic.h>
 #include <linux/seq_file.h>
-#include <linux/sched/signal.h>
 #include <linux/slab.h>
 #include <linux/stacktrace.h>
 
@@ -367,11 +366,6 @@ next_hole(struct drm_mm *mm,
 	  struct drm_mm_node *node,
 	  enum drm_mm_insert_mode mode)
 {
-	/* Searching is slow; check if we ran out of time/patience */
-	cond_resched();
-	if (fatal_signal_pending(current))
-		return NULL;
-
 	switch (mode) {
 	default:
 	case DRM_MM_INSERT_BEST:
@@ -563,7 +557,7 @@ int drm_mm_insert_node_in_range(struct drm_mm * const mm,
 		return 0;
 	}
 
-	return signal_pending(current) ? -ERESTARTSYS : -ENOSPC;
+	return -ENOSPC;
 }
 EXPORT_SYMBOL(drm_mm_insert_node_in_range);
 
diff --git a/drivers/gpu/drm/drm_prime.c b/drivers/gpu/drm/drm_prime.c
index 1de2cde..282774e 100644
--- a/drivers/gpu/drm/drm_prime.c
+++ b/drivers/gpu/drm/drm_prime.c
@@ -962,27 +962,40 @@ int drm_prime_sg_to_page_addr_arrays(struct sg_table *sgt, struct page **pages,
 	unsigned count;
 	struct scatterlist *sg;
 	struct page *page;
-	u32 len, index;
+	u32 page_len, page_index;
 	dma_addr_t addr;
+	u32 dma_len, dma_index;
 
-	index = 0;
+	/*
+	 * Scatterlist elements contains both pages and DMA addresses, but
+	 * one shoud not assume 1:1 relation between them. The sg->length is
+	 * the size of the physical memory chunk described by the sg->page,
+	 * while sg_dma_len(sg) is the size of the DMA (IO virtual) chunk
+	 * described by the sg_dma_address(sg).
+	 */
+	page_index = 0;
+	dma_index = 0;
 	for_each_sg(sgt->sgl, sg, sgt->nents, count) {
-		len = sg_dma_len(sg);
+		page_len = sg->length;
 		page = sg_page(sg);
+		dma_len = sg_dma_len(sg);
 		addr = sg_dma_address(sg);
 
-		while (len > 0) {
-			if (WARN_ON(index >= max_entries))
+		while (pages && page_len > 0) {
+			if (WARN_ON(page_index >= max_entries))
 				return -1;
-			if (pages)
-				pages[index] = page;
-			if (addrs)
-				addrs[index] = addr;
-
+			pages[page_index] = page;
 			page++;
+			page_len -= PAGE_SIZE;
+			page_index++;
+		}
+		while (addrs && dma_len > 0) {
+			if (WARN_ON(dma_index >= max_entries))
+				return -1;
+			addrs[dma_index] = addr;
 			addr += PAGE_SIZE;
-			len -= PAGE_SIZE;
-			index++;
+			dma_len -= PAGE_SIZE;
+			dma_index++;
 		}
 	}
 	return 0;
diff --git a/drivers/gpu/drm/exynos/exynos_dp.c b/drivers/gpu/drm/exynos/exynos_dp.c
index d23d350..5ee0906 100644
--- a/drivers/gpu/drm/exynos/exynos_dp.c
+++ b/drivers/gpu/drm/exynos/exynos_dp.c
@@ -159,15 +159,8 @@ static int exynos_dp_bind(struct device *dev, struct device *master, void *data)
 	struct drm_device *drm_dev = data;
 	int ret;
 
-	dp->dev = dev;
 	dp->drm_dev = drm_dev;
 
-	dp->plat_data.dev_type = EXYNOS_DP;
-	dp->plat_data.power_on_start = exynos_dp_poweron;
-	dp->plat_data.power_off = exynos_dp_poweroff;
-	dp->plat_data.attach = exynos_dp_bridge_attach;
-	dp->plat_data.get_modes = exynos_dp_get_modes;
-
 	if (!dp->plat_data.panel && !dp->ptn_bridge) {
 		ret = exynos_dp_dt_parse_panel(dp);
 		if (ret)
@@ -185,13 +178,11 @@ static int exynos_dp_bind(struct device *dev, struct device *master, void *data)
 
 	dp->plat_data.encoder = encoder;
 
-	dp->adp = analogix_dp_bind(dev, dp->drm_dev, &dp->plat_data);
-	if (IS_ERR(dp->adp)) {
+	ret = analogix_dp_bind(dp->adp, dp->drm_dev);
+	if (ret)
 		dp->encoder.funcs->destroy(&dp->encoder);
-		return PTR_ERR(dp->adp);
-	}
 
-	return 0;
+	return ret;
 }
 
 static void exynos_dp_unbind(struct device *dev, struct device *master,
@@ -222,6 +213,7 @@ static int exynos_dp_probe(struct platform_device *pdev)
 	if (!dp)
 		return -ENOMEM;
 
+	dp->dev = dev;
 	/*
 	 * We just use the drvdata until driver run into component
 	 * add function, and then we would set drvdata to null, so
@@ -247,16 +239,29 @@ static int exynos_dp_probe(struct platform_device *pdev)
 
 	/* The remote port can be either a panel or a bridge */
 	dp->plat_data.panel = panel;
+	dp->plat_data.dev_type = EXYNOS_DP;
+	dp->plat_data.power_on_start = exynos_dp_poweron;
+	dp->plat_data.power_off = exynos_dp_poweroff;
+	dp->plat_data.attach = exynos_dp_bridge_attach;
+	dp->plat_data.get_modes = exynos_dp_get_modes;
 	dp->plat_data.skip_connector = !!bridge;
+
 	dp->ptn_bridge = bridge;
 
 out:
+	dp->adp = analogix_dp_probe(dev, &dp->plat_data);
+	if (IS_ERR(dp->adp))
+		return PTR_ERR(dp->adp);
+
 	return component_add(&pdev->dev, &exynos_dp_ops);
 }
 
 static int exynos_dp_remove(struct platform_device *pdev)
 {
+	struct exynos_dp_device *dp = platform_get_drvdata(pdev);
+
 	component_del(&pdev->dev, &exynos_dp_ops);
+	analogix_dp_remove(dp->adp);
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/i915/.gitignore b/drivers/gpu/drm/i915/.gitignore
index d9a77f3..81972dc 100644
--- a/drivers/gpu/drm/i915/.gitignore
+++ b/drivers/gpu/drm/i915/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 *.hdrtest
diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index 9f887a8..6cd1f62 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -28,9 +28,6 @@
 CFLAGS_i915_pci.o = $(call cc-disable-warning, override-init)
 CFLAGS_display/intel_fbdev.o = $(call cc-disable-warning, override-init)
 
-subdir-ccflags-y += \
-	$(call as-instr,movntdqa (%eax)$(comma)%xmm0,-DCONFIG_AS_MOVNTDQA)
-
 subdir-ccflags-y += -I$(srctree)/$(src)
 
 # Please keep these build lists sorted!
diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index 73d0f46..2c617c9 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -947,7 +947,8 @@ static const struct cnl_ddi_buf_trans *
 ehl_get_combo_buf_trans(struct drm_i915_private *dev_priv, int type, int rate,
 			int *n_entries)
 {
-	if (type == INTEL_OUTPUT_DP && rate > 270000) {
+	if (type != INTEL_OUTPUT_HDMI && type != INTEL_OUTPUT_EDP &&
+	    rate > 270000) {
 		*n_entries = ARRAY_SIZE(ehl_combo_phy_ddi_translations_hbr2_hbr3);
 		return ehl_combo_phy_ddi_translations_hbr2_hbr3;
 	}
@@ -959,7 +960,7 @@ static const struct cnl_ddi_buf_trans *
 tgl_get_combo_buf_trans(struct drm_i915_private *dev_priv, int type, int rate,
 			int *n_entries)
 {
-	if (type != INTEL_OUTPUT_DP) {
+	if (type == INTEL_OUTPUT_HDMI || type == INTEL_OUTPUT_EDP) {
 		return icl_get_combo_buf_trans(dev_priv, type, rate, n_entries);
 	} else if (rate > 270000) {
 		*n_entries = ARRAY_SIZE(tgl_combo_phy_ddi_translations_dp_hbr2);
@@ -1869,7 +1870,11 @@ static void intel_ddi_get_power_domains(struct intel_encoder *encoder,
 		return;
 
 	dig_port = enc_to_dig_port(encoder);
-	intel_display_power_get(dev_priv, dig_port->ddi_io_power_domain);
+
+	if (!intel_phy_is_tc(dev_priv, phy) ||
+	    dig_port->tc_mode != TC_PORT_TBT_ALT)
+		intel_display_power_get(dev_priv,
+					dig_port->ddi_io_power_domain);
 
 	/*
 	 * AUX power is only needed for (e)DP mode, and for HDMI mode on TC
diff --git a/drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c
index 36d0695..b7440f0 100644
--- a/drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c
+++ b/drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c
@@ -896,11 +896,13 @@ static inline struct i915_ggtt *cache_to_ggtt(struct reloc_cache *cache)
 
 static void reloc_gpu_flush(struct reloc_cache *cache)
 {
-	GEM_BUG_ON(cache->rq_size >= cache->rq->batch->obj->base.size / sizeof(u32));
+	struct drm_i915_gem_object *obj = cache->rq->batch->obj;
+
+	GEM_BUG_ON(cache->rq_size >= obj->base.size / sizeof(u32));
 	cache->rq_cmd[cache->rq_size] = MI_BATCH_BUFFER_END;
 
-	__i915_gem_object_flush_map(cache->rq->batch->obj, 0, cache->rq_size);
-	i915_gem_object_unpin_map(cache->rq->batch->obj);
+	__i915_gem_object_flush_map(obj, 0, sizeof(u32) * (cache->rq_size + 1));
+	i915_gem_object_unpin_map(obj);
 
 	intel_gt_chipset_flush(cache->rq->engine->gt);
 
@@ -1477,10 +1479,8 @@ static int eb_relocate_vma(struct i915_execbuffer *eb, struct eb_vma *ev)
 				 * can read from this userspace address.
 				 */
 				offset = gen8_canonical_addr(offset & ~UPDATE);
-				if (unlikely(__put_user(offset, &urelocs[r-stack].presumed_offset))) {
-					remain = -EFAULT;
-					goto out;
-				}
+				__put_user(offset,
+					   &urelocs[r - stack].presumed_offset);
 			}
 		} while (r++, --count);
 		urelocs += ARRAY_SIZE(stack);
diff --git a/drivers/gpu/drm/i915/gt/intel_ggtt.c b/drivers/gpu/drm/i915/gt/intel_ggtt.c
index aed498a..4c5a209 100644
--- a/drivers/gpu/drm/i915/gt/intel_ggtt.c
+++ b/drivers/gpu/drm/i915/gt/intel_ggtt.c
@@ -191,10 +191,11 @@ static void gen8_ggtt_insert_entries(struct i915_address_space *vm,
 				     enum i915_cache_level level,
 				     u32 flags)
 {
-	struct i915_ggtt *ggtt = i915_vm_to_ggtt(vm);
-	struct sgt_iter sgt_iter;
-	gen8_pte_t __iomem *gtt_entries;
 	const gen8_pte_t pte_encode = gen8_ggtt_pte_encode(0, level, 0);
+	struct i915_ggtt *ggtt = i915_vm_to_ggtt(vm);
+	gen8_pte_t __iomem *gte;
+	gen8_pte_t __iomem *end;
+	struct sgt_iter iter;
 	dma_addr_t addr;
 
 	/*
@@ -202,10 +203,17 @@ static void gen8_ggtt_insert_entries(struct i915_address_space *vm,
 	 * not to allow the user to override access to a read only page.
 	 */
 
-	gtt_entries = (gen8_pte_t __iomem *)ggtt->gsm;
-	gtt_entries += vma->node.start / I915_GTT_PAGE_SIZE;
-	for_each_sgt_daddr(addr, sgt_iter, vma->pages)
-		gen8_set_pte(gtt_entries++, pte_encode | addr);
+	gte = (gen8_pte_t __iomem *)ggtt->gsm;
+	gte += vma->node.start / I915_GTT_PAGE_SIZE;
+	end = gte + vma->node.size / I915_GTT_PAGE_SIZE;
+
+	for_each_sgt_daddr(addr, iter, vma->pages)
+		gen8_set_pte(gte++, pte_encode | addr);
+	GEM_BUG_ON(gte > end);
+
+	/* Fill the allocated but "unused" space beyond the end of the buffer */
+	while (gte < end)
+		gen8_set_pte(gte++, vm->scratch[0].encode);
 
 	/*
 	 * We want to flush the TLBs only after we're certain all the PTE
@@ -241,13 +249,22 @@ static void gen6_ggtt_insert_entries(struct i915_address_space *vm,
 				     u32 flags)
 {
 	struct i915_ggtt *ggtt = i915_vm_to_ggtt(vm);
-	gen6_pte_t __iomem *entries = (gen6_pte_t __iomem *)ggtt->gsm;
-	unsigned int i = vma->node.start / I915_GTT_PAGE_SIZE;
+	gen6_pte_t __iomem *gte;
+	gen6_pte_t __iomem *end;
 	struct sgt_iter iter;
 	dma_addr_t addr;
 
+	gte = (gen6_pte_t __iomem *)ggtt->gsm;
+	gte += vma->node.start / I915_GTT_PAGE_SIZE;
+	end = gte + vma->node.size / I915_GTT_PAGE_SIZE;
+
 	for_each_sgt_daddr(addr, iter, vma->pages)
-		iowrite32(vm->pte_encode(addr, level, flags), &entries[i++]);
+		iowrite32(vm->pte_encode(addr, level, flags), gte++);
+	GEM_BUG_ON(gte > end);
+
+	/* Fill the allocated but "unused" space beyond the end of the buffer */
+	while (gte < end)
+		iowrite32(vm->scratch[0].encode, gte++);
 
 	/*
 	 * We want to flush the TLBs only after we're certain all the PTE
diff --git a/drivers/gpu/drm/i915/gvt/cmd_parser.c b/drivers/gpu/drm/i915/gvt/cmd_parser.c
index 9e065ad..a3cc080 100644
--- a/drivers/gpu/drm/i915/gvt/cmd_parser.c
+++ b/drivers/gpu/drm/i915/gvt/cmd_parser.c
@@ -164,6 +164,7 @@ struct decode_info {
 #define OP_STATE_BASE_ADDRESS                   OP_3D_MEDIA(0x0, 0x1, 0x01)
 #define OP_STATE_SIP                            OP_3D_MEDIA(0x0, 0x1, 0x02)
 #define OP_3D_MEDIA_0_1_4			OP_3D_MEDIA(0x0, 0x1, 0x04)
+#define OP_SWTESS_BASE_ADDRESS			OP_3D_MEDIA(0x0, 0x1, 0x03)
 
 #define OP_3DSTATE_VF_STATISTICS_GM45           OP_3D_MEDIA(0x1, 0x0, 0x0B)
 
@@ -967,18 +968,6 @@ static int cmd_handler_lri(struct parser_exec_state *s)
 {
 	int i, ret = 0;
 	int cmd_len = cmd_length(s);
-	u32 valid_len = CMD_LEN(1);
-
-	/*
-	 * Official intel docs are somewhat sloppy , check the definition of
-	 * MI_LOAD_REGISTER_IMM.
-	 */
-	#define MAX_VALID_LEN 127
-	if ((cmd_len < valid_len) || (cmd_len > MAX_VALID_LEN)) {
-		gvt_err("len is not valid:  len=%u  valid_len=%u\n",
-			cmd_len, valid_len);
-		return -EFAULT;
-	}
 
 	for (i = 1; i < cmd_len; i += 2) {
 		if (IS_BROADWELL(s->engine->i915) && s->engine->id != RCS0) {
@@ -2485,6 +2474,9 @@ static const struct cmd_info cmd_info[] = {
 	{"OP_3D_MEDIA_0_1_4", OP_3D_MEDIA_0_1_4, F_LEN_VAR, R_RCS, D_ALL,
 		ADDR_FIX_1(1), 8, NULL},
 
+	{"OP_SWTESS_BASE_ADDRESS", OP_SWTESS_BASE_ADDRESS,
+		F_LEN_VAR, R_RCS, D_ALL, ADDR_FIX_2(1, 2), 3, NULL},
+
 	{"3DSTATE_VS", OP_3DSTATE_VS, F_LEN_VAR, R_RCS, D_ALL, 0, 8, NULL},
 
 	{"3DSTATE_SF", OP_3DSTATE_SF, F_LEN_VAR, R_RCS, D_ALL, 0, 8, NULL},
diff --git a/drivers/gpu/drm/i915/gvt/display.c b/drivers/gpu/drm/i915/gvt/display.c
index 6e5c988..a83df2f 100644
--- a/drivers/gpu/drm/i915/gvt/display.c
+++ b/drivers/gpu/drm/i915/gvt/display.c
@@ -221,7 +221,7 @@ static void emulate_monitor_status_change(struct intel_vgpu *vgpu)
 			~(TRANS_DDI_BPC_MASK | TRANS_DDI_MODE_SELECT_MASK |
 			TRANS_DDI_PORT_MASK);
 		vgpu_vreg_t(vgpu, TRANS_DDI_FUNC_CTL(TRANSCODER_A)) |=
-			(TRANS_DDI_BPC_8 | TRANS_DDI_MODE_SELECT_DVI |
+			(TRANS_DDI_BPC_8 | TRANS_DDI_MODE_SELECT_DP_SST |
 			(PORT_B << TRANS_DDI_PORT_SHIFT) |
 			TRANS_DDI_FUNC_ENABLE);
 		if (IS_BROADWELL(dev_priv)) {
@@ -241,7 +241,7 @@ static void emulate_monitor_status_change(struct intel_vgpu *vgpu)
 			~(TRANS_DDI_BPC_MASK | TRANS_DDI_MODE_SELECT_MASK |
 			TRANS_DDI_PORT_MASK);
 		vgpu_vreg_t(vgpu, TRANS_DDI_FUNC_CTL(TRANSCODER_A)) |=
-			(TRANS_DDI_BPC_8 | TRANS_DDI_MODE_SELECT_DVI |
+			(TRANS_DDI_BPC_8 | TRANS_DDI_MODE_SELECT_DP_SST |
 			(PORT_C << TRANS_DDI_PORT_SHIFT) |
 			TRANS_DDI_FUNC_ENABLE);
 		if (IS_BROADWELL(dev_priv)) {
@@ -261,7 +261,7 @@ static void emulate_monitor_status_change(struct intel_vgpu *vgpu)
 			~(TRANS_DDI_BPC_MASK | TRANS_DDI_MODE_SELECT_MASK |
 			TRANS_DDI_PORT_MASK);
 		vgpu_vreg_t(vgpu, TRANS_DDI_FUNC_CTL(TRANSCODER_A)) |=
-			(TRANS_DDI_BPC_8 | TRANS_DDI_MODE_SELECT_DVI |
+			(TRANS_DDI_BPC_8 | TRANS_DDI_MODE_SELECT_DP_SST |
 			(PORT_D << TRANS_DDI_PORT_SHIFT) |
 			TRANS_DDI_FUNC_ENABLE);
 		if (IS_BROADWELL(dev_priv)) {
diff --git a/drivers/gpu/drm/i915/gvt/handlers.c b/drivers/gpu/drm/i915/gvt/handlers.c
index 0182e2a..2faf50e 100644
--- a/drivers/gpu/drm/i915/gvt/handlers.c
+++ b/drivers/gpu/drm/i915/gvt/handlers.c
@@ -462,11 +462,14 @@ static int pipeconf_mmio_write(struct intel_vgpu *vgpu, unsigned int offset,
 	return 0;
 }
 
-/* ascendingly sorted */
+/* sorted in ascending order */
 static i915_reg_t force_nonpriv_white_list[] = {
+	_MMIO(0xd80),
 	GEN9_CS_DEBUG_MODE1, //_MMIO(0x20ec)
 	GEN9_CTX_PREEMPT_REG,//_MMIO(0x2248)
-	PS_INVOCATION_COUNT,//_MMIO(0x2348)
+	CL_PRIMITIVES_COUNT, //_MMIO(0x2340)
+	PS_INVOCATION_COUNT, //_MMIO(0x2348)
+	PS_DEPTH_COUNT, //_MMIO(0x2350)
 	GEN8_CS_CHICKEN1,//_MMIO(0x2580)
 	_MMIO(0x2690),
 	_MMIO(0x2694),
@@ -491,6 +494,7 @@ static i915_reg_t force_nonpriv_white_list[] = {
 	_MMIO(0xe18c),
 	_MMIO(0xe48c),
 	_MMIO(0xe5f4),
+	_MMIO(0x64844),
 };
 
 /* a simple bsearch */
diff --git a/drivers/gpu/drm/i915/gvt/kvmgt.c b/drivers/gpu/drm/i915/gvt/kvmgt.c
index 074c4ef..eee5304 100644
--- a/drivers/gpu/drm/i915/gvt/kvmgt.c
+++ b/drivers/gpu/drm/i915/gvt/kvmgt.c
@@ -131,6 +131,7 @@ struct kvmgt_vdev {
 	struct work_struct release_work;
 	atomic_t released;
 	struct vfio_device *vfio_device;
+	struct vfio_group *vfio_group;
 };
 
 static inline struct kvmgt_vdev *kvmgt_vdev(struct intel_vgpu *vgpu)
@@ -151,6 +152,7 @@ static void gvt_unpin_guest_page(struct intel_vgpu *vgpu, unsigned long gfn,
 		unsigned long size)
 {
 	struct drm_i915_private *i915 = vgpu->gvt->gt->i915;
+	struct kvmgt_vdev *vdev = kvmgt_vdev(vgpu);
 	int total_pages;
 	int npage;
 	int ret;
@@ -160,7 +162,7 @@ static void gvt_unpin_guest_page(struct intel_vgpu *vgpu, unsigned long gfn,
 	for (npage = 0; npage < total_pages; npage++) {
 		unsigned long cur_gfn = gfn + npage;
 
-		ret = vfio_unpin_pages(mdev_dev(kvmgt_vdev(vgpu)->mdev), &cur_gfn, 1);
+		ret = vfio_group_unpin_pages(vdev->vfio_group, &cur_gfn, 1);
 		drm_WARN_ON(&i915->drm, ret != 1);
 	}
 }
@@ -169,6 +171,7 @@ static void gvt_unpin_guest_page(struct intel_vgpu *vgpu, unsigned long gfn,
 static int gvt_pin_guest_page(struct intel_vgpu *vgpu, unsigned long gfn,
 		unsigned long size, struct page **page)
 {
+	struct kvmgt_vdev *vdev = kvmgt_vdev(vgpu);
 	unsigned long base_pfn = 0;
 	int total_pages;
 	int npage;
@@ -183,8 +186,8 @@ static int gvt_pin_guest_page(struct intel_vgpu *vgpu, unsigned long gfn,
 		unsigned long cur_gfn = gfn + npage;
 		unsigned long pfn;
 
-		ret = vfio_pin_pages(mdev_dev(kvmgt_vdev(vgpu)->mdev), &cur_gfn, 1,
-				     IOMMU_READ | IOMMU_WRITE, &pfn);
+		ret = vfio_group_pin_pages(vdev->vfio_group, &cur_gfn, 1,
+					   IOMMU_READ | IOMMU_WRITE, &pfn);
 		if (ret != 1) {
 			gvt_vgpu_err("vfio_pin_pages failed for gfn 0x%lx, ret %d\n",
 				     cur_gfn, ret);
@@ -792,6 +795,7 @@ static int intel_vgpu_open(struct mdev_device *mdev)
 	struct kvmgt_vdev *vdev = kvmgt_vdev(vgpu);
 	unsigned long events;
 	int ret;
+	struct vfio_group *vfio_group;
 
 	vdev->iommu_notifier.notifier_call = intel_vgpu_iommu_notifier;
 	vdev->group_notifier.notifier_call = intel_vgpu_group_notifier;
@@ -814,6 +818,14 @@ static int intel_vgpu_open(struct mdev_device *mdev)
 		goto undo_iommu;
 	}
 
+	vfio_group = vfio_group_get_external_user_from_dev(mdev_dev(mdev));
+	if (IS_ERR_OR_NULL(vfio_group)) {
+		ret = !vfio_group ? -EFAULT : PTR_ERR(vfio_group);
+		gvt_vgpu_err("vfio_group_get_external_user_from_dev failed\n");
+		goto undo_register;
+	}
+	vdev->vfio_group = vfio_group;
+
 	/* Take a module reference as mdev core doesn't take
 	 * a reference for vendor driver.
 	 */
@@ -830,6 +842,10 @@ static int intel_vgpu_open(struct mdev_device *mdev)
 	return ret;
 
 undo_group:
+	vfio_group_put_external_user(vdev->vfio_group);
+	vdev->vfio_group = NULL;
+
+undo_register:
 	vfio_unregister_notifier(mdev_dev(mdev), VFIO_GROUP_NOTIFY,
 					&vdev->group_notifier);
 
@@ -884,6 +900,7 @@ static void __intel_vgpu_release(struct intel_vgpu *vgpu)
 	kvmgt_guest_exit(info);
 
 	intel_vgpu_release_msi_eventfd_ctx(vgpu);
+	vfio_group_put_external_user(vdev->vfio_group);
 
 	vdev->kvm = NULL;
 	vgpu->handle = 0;
@@ -2035,33 +2052,14 @@ static int kvmgt_rw_gpa(unsigned long handle, unsigned long gpa,
 			void *buf, unsigned long len, bool write)
 {
 	struct kvmgt_guest_info *info;
-	struct kvm *kvm;
-	int idx, ret;
-	bool kthread = current->mm == NULL;
 
 	if (!handle_valid(handle))
 		return -ESRCH;
 
 	info = (struct kvmgt_guest_info *)handle;
-	kvm = info->kvm;
 
-	if (kthread) {
-		if (!mmget_not_zero(kvm->mm))
-			return -EFAULT;
-		use_mm(kvm->mm);
-	}
-
-	idx = srcu_read_lock(&kvm->srcu);
-	ret = write ? kvm_write_guest(kvm, gpa, buf, len) :
-		      kvm_read_guest(kvm, gpa, buf, len);
-	srcu_read_unlock(&kvm->srcu, idx);
-
-	if (kthread) {
-		unuse_mm(kvm->mm);
-		mmput(kvm->mm);
-	}
-
-	return ret;
+	return vfio_dma_rw(kvmgt_vdev(info->vgpu)->vfio_group,
+			   gpa, buf, len, write);
 }
 
 static int kvmgt_read_gpa(unsigned long handle, unsigned long gpa,
diff --git a/drivers/gpu/drm/i915/gvt/scheduler.c b/drivers/gpu/drm/i915/gvt/scheduler.c
index 1c95bf8..cb11c31 100644
--- a/drivers/gpu/drm/i915/gvt/scheduler.c
+++ b/drivers/gpu/drm/i915/gvt/scheduler.c
@@ -296,8 +296,8 @@ shadow_context_descriptor_update(struct intel_context *ce,
 	 * Update bits 0-11 of the context descriptor which includes flags
 	 * like GEN8_CTX_* cached in desc_template
 	 */
-	desc &= ~(0x3 << GEN8_CTX_ADDRESSING_MODE_SHIFT);
-	desc |= workload->ctx_desc.addressing_mode <<
+	desc &= ~(0x3ull << GEN8_CTX_ADDRESSING_MODE_SHIFT);
+	desc |= (u64)workload->ctx_desc.addressing_mode <<
 		GEN8_CTX_ADDRESSING_MODE_SHIFT;
 
 	ce->lrc_desc = desc;
diff --git a/drivers/gpu/drm/i915/i915_memcpy.c b/drivers/gpu/drm/i915/i915_memcpy.c
index fdd5504..7b3b83b 100644
--- a/drivers/gpu/drm/i915/i915_memcpy.c
+++ b/drivers/gpu/drm/i915/i915_memcpy.c
@@ -35,7 +35,6 @@
 
 static DEFINE_STATIC_KEY_FALSE(has_movntdqa);
 
-#ifdef CONFIG_AS_MOVNTDQA
 static void __memcpy_ntdqa(void *dst, const void *src, unsigned long len)
 {
 	kernel_fpu_begin();
@@ -93,10 +92,6 @@ static void __memcpy_ntdqu(void *dst, const void *src, unsigned long len)
 
 	kernel_fpu_end();
 }
-#else
-static void __memcpy_ntdqa(void *dst, const void *src, unsigned long len) {}
-static void __memcpy_ntdqu(void *dst, const void *src, unsigned long len) {}
-#endif
 
 /**
  * i915_memcpy_from_wc: perform an accelerated *aligned* read from WC
diff --git a/drivers/gpu/drm/i915/i915_perf.c b/drivers/gpu/drm/i915/i915_perf.c
index 551be58..66a46e4 100644
--- a/drivers/gpu/drm/i915/i915_perf.c
+++ b/drivers/gpu/drm/i915/i915_perf.c
@@ -2941,49 +2941,6 @@ void i915_oa_init_reg_state(const struct intel_context *ce,
 }
 
 /**
- * i915_perf_read_locked - &i915_perf_stream_ops->read with error normalisation
- * @stream: An i915 perf stream
- * @file: An i915 perf stream file
- * @buf: destination buffer given by userspace
- * @count: the number of bytes userspace wants to read
- * @ppos: (inout) file seek position (unused)
- *
- * Besides wrapping &i915_perf_stream_ops->read this provides a common place to
- * ensure that if we've successfully copied any data then reporting that takes
- * precedence over any internal error status, so the data isn't lost.
- *
- * For example ret will be -ENOSPC whenever there is more buffered data than
- * can be copied to userspace, but that's only interesting if we weren't able
- * to copy some data because it implies the userspace buffer is too small to
- * receive a single record (and we never split records).
- *
- * Another case with ret == -EFAULT is more of a grey area since it would seem
- * like bad form for userspace to ask us to overrun its buffer, but the user
- * knows best:
- *
- *   http://yarchive.net/comp/linux/partial_reads_writes.html
- *
- * Returns: The number of bytes copied or a negative error code on failure.
- */
-static ssize_t i915_perf_read_locked(struct i915_perf_stream *stream,
-				     struct file *file,
-				     char __user *buf,
-				     size_t count,
-				     loff_t *ppos)
-{
-	/* Note we keep the offset (aka bytes read) separate from any
-	 * error status so that the final check for whether we return
-	 * the bytes read with a higher precedence than any error (see
-	 * comment below) doesn't need to be handled/duplicated in
-	 * stream->ops->read() implementations.
-	 */
-	size_t offset = 0;
-	int ret = stream->ops->read(stream, buf, count, &offset);
-
-	return offset ?: (ret ?: -EAGAIN);
-}
-
-/**
  * i915_perf_read - handles read() FOP for i915 perf stream FDs
  * @file: An i915 perf stream file
  * @buf: destination buffer given by userspace
@@ -3008,7 +2965,8 @@ static ssize_t i915_perf_read(struct file *file,
 {
 	struct i915_perf_stream *stream = file->private_data;
 	struct i915_perf *perf = stream->perf;
-	ssize_t ret;
+	size_t offset = 0;
+	int ret;
 
 	/* To ensure it's handled consistently we simply treat all reads of a
 	 * disabled stream as an error. In particular it might otherwise lead
@@ -3031,13 +2989,12 @@ static ssize_t i915_perf_read(struct file *file,
 				return ret;
 
 			mutex_lock(&perf->lock);
-			ret = i915_perf_read_locked(stream, file,
-						    buf, count, ppos);
+			ret = stream->ops->read(stream, buf, count, &offset);
 			mutex_unlock(&perf->lock);
-		} while (ret == -EAGAIN);
+		} while (!offset && !ret);
 	} else {
 		mutex_lock(&perf->lock);
-		ret = i915_perf_read_locked(stream, file, buf, count, ppos);
+		ret = stream->ops->read(stream, buf, count, &offset);
 		mutex_unlock(&perf->lock);
 	}
 
@@ -3048,15 +3005,15 @@ static ssize_t i915_perf_read(struct file *file,
 	 * and read() returning -EAGAIN. Clearing the oa.pollin state here
 	 * effectively ensures we back off until the next hrtimer callback
 	 * before reporting another EPOLLIN event.
+	 * The exception to this is if ops->read() returned -ENOSPC which means
+	 * that more OA data is available than could fit in the user provided
+	 * buffer. In this case we want the next poll() call to not block.
 	 */
-	if (ret >= 0 || ret == -EAGAIN) {
-		/* Maybe make ->pollin per-stream state if we support multiple
-		 * concurrent streams in the future.
-		 */
+	if (ret != -ENOSPC)
 		stream->pollin = false;
-	}
 
-	return ret;
+	/* Possible values for ret are 0, -EFAULT, -ENOSPC, -EIO, ... */
+	return offset ?: (ret ?: -EAGAIN);
 }
 
 static enum hrtimer_restart oa_poll_check_timer_cb(struct hrtimer *hrtimer)
diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi.c b/drivers/gpu/drm/mediatek/mtk_hdmi.c
index a8b2055..ff43a3d 100644
--- a/drivers/gpu/drm/mediatek/mtk_hdmi.c
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi.c
@@ -12,6 +12,7 @@
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/mfd/syscon.h>
+#include <linux/mutex.h>
 #include <linux/of_platform.h>
 #include <linux/of.h>
 #include <linux/of_gpio.h>
@@ -169,6 +170,9 @@ struct mtk_hdmi {
 	bool audio_enable;
 	bool powered;
 	bool enabled;
+	hdmi_codec_plugged_cb plugged_cb;
+	struct device *codec_dev;
+	struct mutex update_plugged_status_lock;
 };
 
 static inline struct mtk_hdmi *hdmi_ctx_from_bridge(struct drm_bridge *b)
@@ -1194,13 +1198,26 @@ static void mtk_hdmi_clk_disable_audio(struct mtk_hdmi *hdmi)
 	clk_disable_unprepare(hdmi->clk[MTK_HDMI_CLK_AUD_SPDIF]);
 }
 
+static enum drm_connector_status
+mtk_hdmi_update_plugged_status(struct mtk_hdmi *hdmi)
+{
+	bool connected;
+
+	mutex_lock(&hdmi->update_plugged_status_lock);
+	connected = mtk_cec_hpd_high(hdmi->cec_dev);
+	if (hdmi->plugged_cb && hdmi->codec_dev)
+		hdmi->plugged_cb(hdmi->codec_dev, connected);
+	mutex_unlock(&hdmi->update_plugged_status_lock);
+
+	return connected ?
+	       connector_status_connected : connector_status_disconnected;
+}
+
 static enum drm_connector_status hdmi_conn_detect(struct drm_connector *conn,
 						  bool force)
 {
 	struct mtk_hdmi *hdmi = hdmi_ctx_from_conn(conn);
-
-	return mtk_cec_hpd_high(hdmi->cec_dev) ?
-	       connector_status_connected : connector_status_disconnected;
+	return mtk_hdmi_update_plugged_status(hdmi);
 }
 
 static void hdmi_conn_destroy(struct drm_connector *conn)
@@ -1657,20 +1674,39 @@ static int mtk_hdmi_audio_get_eld(struct device *dev, void *data, uint8_t *buf,
 	return 0;
 }
 
+static int mtk_hdmi_audio_hook_plugged_cb(struct device *dev, void *data,
+					  hdmi_codec_plugged_cb fn,
+					  struct device *codec_dev)
+{
+	struct mtk_hdmi *hdmi = data;
+
+	mutex_lock(&hdmi->update_plugged_status_lock);
+	hdmi->plugged_cb = fn;
+	hdmi->codec_dev = codec_dev;
+	mutex_unlock(&hdmi->update_plugged_status_lock);
+
+	mtk_hdmi_update_plugged_status(hdmi);
+
+	return 0;
+}
+
 static const struct hdmi_codec_ops mtk_hdmi_audio_codec_ops = {
 	.hw_params = mtk_hdmi_audio_hw_params,
 	.audio_startup = mtk_hdmi_audio_startup,
 	.audio_shutdown = mtk_hdmi_audio_shutdown,
 	.digital_mute = mtk_hdmi_audio_digital_mute,
 	.get_eld = mtk_hdmi_audio_get_eld,
+	.hook_plugged_cb = mtk_hdmi_audio_hook_plugged_cb,
 };
 
-static void mtk_hdmi_register_audio_driver(struct device *dev)
+static int mtk_hdmi_register_audio_driver(struct device *dev)
 {
+	struct mtk_hdmi *hdmi = dev_get_drvdata(dev);
 	struct hdmi_codec_pdata codec_data = {
 		.ops = &mtk_hdmi_audio_codec_ops,
 		.max_i2s_channels = 2,
 		.i2s = 1,
+		.data = hdmi,
 	};
 	struct platform_device *pdev;
 
@@ -1678,9 +1714,10 @@ static void mtk_hdmi_register_audio_driver(struct device *dev)
 					     PLATFORM_DEVID_AUTO, &codec_data,
 					     sizeof(codec_data));
 	if (IS_ERR(pdev))
-		return;
+		return PTR_ERR(pdev);
 
 	DRM_INFO("%s driver bound to HDMI\n", HDMI_CODEC_DRV_NAME);
+	return 0;
 }
 
 static int mtk_drm_hdmi_probe(struct platform_device *pdev)
@@ -1706,6 +1743,7 @@ static int mtk_drm_hdmi_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	mutex_init(&hdmi->update_plugged_status_lock);
 	platform_set_drvdata(pdev, hdmi);
 
 	ret = mtk_hdmi_output_init(hdmi);
@@ -1714,7 +1752,11 @@ static int mtk_drm_hdmi_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	mtk_hdmi_register_audio_driver(dev);
+	ret = mtk_hdmi_register_audio_driver(dev);
+	if (ret) {
+		dev_err(dev, "Failed to register audio driver: %d\n", ret);
+		return ret;
+	}
 
 	hdmi->bridge.funcs = &mtk_hdmi_bridge_funcs;
 	hdmi->bridge.of_node = pdev->dev.of_node;
diff --git a/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c b/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c
index 6650f47..47b9898 100644
--- a/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c
+++ b/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c
@@ -633,7 +633,7 @@ struct msm_kms *mdp5_kms_init(struct drm_device *dev)
 
 	if (config->platform.iommu) {
 		iommu_dev = &pdev->dev;
-		if (!iommu_dev->iommu_fwspec)
+		if (!dev_iommu_fwspec_get(iommu_dev))
 			iommu_dev = iommu_dev->parent;
 
 		aspace = msm_gem_address_space_create(iommu_dev,
diff --git a/drivers/gpu/drm/nouveau/dispnv04/dac.c b/drivers/gpu/drm/nouveau/dispnv04/dac.c
index e8eef88..ffdd447 100644
--- a/drivers/gpu/drm/nouveau/dispnv04/dac.c
+++ b/drivers/gpu/drm/nouveau/dispnv04/dac.c
@@ -35,7 +35,8 @@
 
 #include <subdev/bios/gpio.h>
 #include <subdev/gpio.h>
-#include <subdev/timer.h>
+
+#include <nvif/timer.h>
 
 int nv04_dac_output_offset(struct drm_encoder *encoder)
 {
diff --git a/drivers/gpu/drm/nouveau/dispnv04/hw.c b/drivers/gpu/drm/nouveau/dispnv04/hw.c
index 3fdfafa..b674d68 100644
--- a/drivers/gpu/drm/nouveau/dispnv04/hw.c
+++ b/drivers/gpu/drm/nouveau/dispnv04/hw.c
@@ -26,6 +26,7 @@
 #include "hw.h"
 
 #include <subdev/bios/pll.h>
+#include <nvif/timer.h>
 
 #define CHIPSET_NFORCE 0x01a0
 #define CHIPSET_NFORCE2 0x01f0
diff --git a/drivers/gpu/drm/nouveau/dispnv50/base507c.c b/drivers/gpu/drm/nouveau/dispnv50/base507c.c
index 00a85f1..ee78215 100644
--- a/drivers/gpu/drm/nouveau/dispnv50/base507c.c
+++ b/drivers/gpu/drm/nouveau/dispnv50/base507c.c
@@ -23,6 +23,7 @@
 
 #include <nvif/cl507c.h>
 #include <nvif/event.h>
+#include <nvif/timer.h>
 
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_fourcc.h>
diff --git a/drivers/gpu/drm/nouveau/dispnv50/core507d.c b/drivers/gpu/drm/nouveau/dispnv50/core507d.c
index e7fcfa6..c5152c3 100644
--- a/drivers/gpu/drm/nouveau/dispnv50/core507d.c
+++ b/drivers/gpu/drm/nouveau/dispnv50/core507d.c
@@ -23,6 +23,7 @@
 #include "head.h"
 
 #include <nvif/cl507d.h>
+#include <nvif/timer.h>
 
 #include "nouveau_bo.h"
 
diff --git a/drivers/gpu/drm/nouveau/dispnv50/corec37d.c b/drivers/gpu/drm/nouveau/dispnv50/corec37d.c
index 3b36dc8..c03cb98 100644
--- a/drivers/gpu/drm/nouveau/dispnv50/corec37d.c
+++ b/drivers/gpu/drm/nouveau/dispnv50/corec37d.c
@@ -24,6 +24,8 @@
 
 #include <nouveau_bo.h>
 
+#include <nvif/timer.h>
+
 void
 corec37d_wndw_owner(struct nv50_core *core)
 {
diff --git a/drivers/gpu/drm/nouveau/dispnv50/curs507a.c b/drivers/gpu/drm/nouveau/dispnv50/curs507a.c
index 397143b..8c5cf09 100644
--- a/drivers/gpu/drm/nouveau/dispnv50/curs507a.c
+++ b/drivers/gpu/drm/nouveau/dispnv50/curs507a.c
@@ -24,21 +24,36 @@
 #include "head.h"
 
 #include <nvif/cl507a.h>
+#include <nvif/timer.h>
 
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_plane_helper.h>
 
+bool
+curs507a_space(struct nv50_wndw *wndw)
+{
+	nvif_msec(&nouveau_drm(wndw->plane.dev)->client.device, 2,
+		if (nvif_rd32(&wndw->wimm.base.user, 0x0008) >= 4)
+			return true;
+	);
+	WARN_ON(1);
+	return false;
+}
+
 static void
 curs507a_update(struct nv50_wndw *wndw, u32 *interlock)
 {
-	nvif_wr32(&wndw->wimm.base.user, 0x0080, 0x00000000);
+	if (curs507a_space(wndw))
+		nvif_wr32(&wndw->wimm.base.user, 0x0080, 0x00000000);
 }
 
 static void
 curs507a_point(struct nv50_wndw *wndw, struct nv50_wndw_atom *asyw)
 {
-	nvif_wr32(&wndw->wimm.base.user, 0x0084, asyw->point.y << 16 |
-						 asyw->point.x);
+	if (curs507a_space(wndw)) {
+		nvif_wr32(&wndw->wimm.base.user, 0x0084, asyw->point.y << 16 |
+							 asyw->point.x);
+	}
 }
 
 const struct nv50_wimm_func
diff --git a/drivers/gpu/drm/nouveau/dispnv50/cursc37a.c b/drivers/gpu/drm/nouveau/dispnv50/cursc37a.c
index 23fb29d..96dff4f 100644
--- a/drivers/gpu/drm/nouveau/dispnv50/cursc37a.c
+++ b/drivers/gpu/drm/nouveau/dispnv50/cursc37a.c
@@ -25,14 +25,17 @@
 static void
 cursc37a_update(struct nv50_wndw *wndw, u32 *interlock)
 {
-	nvif_wr32(&wndw->wimm.base.user, 0x0200, 0x00000001);
+	if (curs507a_space(wndw))
+		nvif_wr32(&wndw->wimm.base.user, 0x0200, 0x00000001);
 }
 
 static void
 cursc37a_point(struct nv50_wndw *wndw, struct nv50_wndw_atom *asyw)
 {
-	nvif_wr32(&wndw->wimm.base.user, 0x0208, asyw->point.y << 16 |
-						 asyw->point.x);
+	if (curs507a_space(wndw)) {
+		nvif_wr32(&wndw->wimm.base.user, 0x0208, asyw->point.y << 16 |
+							 asyw->point.x);
+	}
 }
 
 static const struct nv50_wimm_func
diff --git a/drivers/gpu/drm/nouveau/dispnv50/disp.c b/drivers/gpu/drm/nouveau/dispnv50/disp.c
index 4d1c584..6be9df18 100644
--- a/drivers/gpu/drm/nouveau/dispnv50/disp.c
+++ b/drivers/gpu/drm/nouveau/dispnv50/disp.c
@@ -45,6 +45,7 @@
 #include <nvif/cl5070.h>
 #include <nvif/cl507d.h>
 #include <nvif/event.h>
+#include <nvif/timer.h>
 
 #include "nouveau_drv.h"
 #include "nouveau_dma.h"
diff --git a/drivers/gpu/drm/nouveau/dispnv50/ovly827e.c b/drivers/gpu/drm/nouveau/dispnv50/ovly827e.c
index 2e68fc7..4f7ce57 100644
--- a/drivers/gpu/drm/nouveau/dispnv50/ovly827e.c
+++ b/drivers/gpu/drm/nouveau/dispnv50/ovly827e.c
@@ -24,6 +24,8 @@
 
 #include <nouveau_bo.h>
 
+#include <nvif/timer.h>
+
 static void
 ovly827e_image_set(struct nv50_wndw *wndw, struct nv50_wndw_atom *asyw)
 {
diff --git a/drivers/gpu/drm/nouveau/dispnv50/wndw.h b/drivers/gpu/drm/nouveau/dispnv50/wndw.h
index caf3974..a7412b9d 100644
--- a/drivers/gpu/drm/nouveau/dispnv50/wndw.h
+++ b/drivers/gpu/drm/nouveau/dispnv50/wndw.h
@@ -97,6 +97,7 @@ struct nv50_wimm_func {
 };
 
 extern const struct nv50_wimm_func curs507a;
+bool curs507a_space(struct nv50_wndw *);
 
 int wndwc37e_new(struct nouveau_drm *, enum drm_plane_type, int, s32,
 		 struct nv50_wndw **);
diff --git a/drivers/gpu/drm/nouveau/include/nvif/device.h b/drivers/gpu/drm/nouveau/include/nvif/device.h
index 25d969d..c2a572c 100644
--- a/drivers/gpu/drm/nouveau/include/nvif/device.h
+++ b/drivers/gpu/drm/nouveau/include/nvif/device.h
@@ -23,27 +23,6 @@ int  nvif_device_init(struct nvif_object *, u32 handle, s32 oclass, void *, u32,
 void nvif_device_fini(struct nvif_device *);
 u64  nvif_device_time(struct nvif_device *);
 
-/* Delay based on GPU time (ie. PTIMER).
- *
- * Will return -ETIMEDOUT unless the loop was terminated with 'break',
- * where it will return the number of nanoseconds taken instead.
- */
-#define nvif_nsec(d,n,cond...) ({                                              \
-	struct nvif_device *_device = (d);                                     \
-	u64 _nsecs = (n), _time0 = nvif_device_time(_device);                  \
-	s64 _taken = 0;                                                        \
-                                                                               \
-	do {                                                                   \
-		cond                                                           \
-	} while (_taken = nvif_device_time(_device) - _time0, _taken < _nsecs);\
-                                                                               \
-	if (_taken >= _nsecs)                                                  \
-		_taken = -ETIMEDOUT;                                           \
-	_taken;                                                                \
-})
-#define nvif_usec(d,u,cond...) nvif_nsec((d), (u) * 1000, ##cond)
-#define nvif_msec(d,m,cond...) nvif_usec((d), (m) * 1000, ##cond)
-
 /*XXX*/
 #include <subdev/bios.h>
 #include <subdev/fb.h>
diff --git a/drivers/gpu/drm/nouveau/include/nvif/timer.h b/drivers/gpu/drm/nouveau/include/nvif/timer.h
new file mode 100644
index 0000000..57587a9
--- /dev/null
+++ b/drivers/gpu/drm/nouveau/include/nvif/timer.h
@@ -0,0 +1,35 @@
+#ifndef __NVIF_TIMER_H__
+#define __NVIF_TIMER_H__
+#include <nvif/os.h>
+
+struct nvif_timer_wait {
+	struct nvif_device *device;
+	u64 limit;
+	u64 time0;
+	u64 time1;
+	int reads;
+};
+
+void nvif_timer_wait_init(struct nvif_device *, u64 nsec,
+			  struct nvif_timer_wait *);
+s64 nvif_timer_wait_test(struct nvif_timer_wait *);
+
+/* Delay based on GPU time (ie. PTIMER).
+ *
+ * Will return -ETIMEDOUT unless the loop was terminated with 'break',
+ * where it will return the number of nanoseconds taken instead.
+ */
+#define nvif_nsec(d,n,cond...) ({                                              \
+	struct nvif_timer_wait _wait;                                          \
+	s64 _taken = 0;                                                        \
+                                                                               \
+	nvif_timer_wait_init((d), (n), &_wait);                                \
+	do {                                                                   \
+		cond                                                           \
+	} while ((_taken = nvif_timer_wait_test(&_wait)) >= 0);                \
+                                                                               \
+	_taken;                                                                \
+})
+#define nvif_usec(d,u,cond...) nvif_nsec((d), (u) * 1000, ##cond)
+#define nvif_msec(d,m,cond...) nvif_usec((d), (m) * 1000, ##cond)
+#endif
diff --git a/drivers/gpu/drm/nouveau/include/nvif/user.h b/drivers/gpu/drm/nouveau/include/nvif/user.h
index 03c1182..6825574 100644
--- a/drivers/gpu/drm/nouveau/include/nvif/user.h
+++ b/drivers/gpu/drm/nouveau/include/nvif/user.h
@@ -10,6 +10,7 @@ struct nvif_user {
 
 struct nvif_user_func {
 	void (*doorbell)(struct nvif_user *, u32 token);
+	u64 (*time)(struct nvif_user *);
 };
 
 int nvif_user_init(struct nvif_device *);
diff --git a/drivers/gpu/drm/nouveau/nouveau_bo.c b/drivers/gpu/drm/nouveau/nouveau_bo.c
index 2b4b21b..c40f127 100644
--- a/drivers/gpu/drm/nouveau/nouveau_bo.c
+++ b/drivers/gpu/drm/nouveau/nouveau_bo.c
@@ -1494,8 +1494,13 @@ nouveau_ttm_io_mem_reserve(struct ttm_bo_device *bdev, struct ttm_mem_reg *reg)
 			ret = nvif_object_map_handle(&mem->mem.object,
 						     &args, argc,
 						     &handle, &length);
-			if (ret != 1)
-				return ret ? ret : -EINVAL;
+			if (ret != 1) {
+				if (WARN_ON(ret == 0))
+					return -EINVAL;
+				if (ret == -ENOSPC)
+					return -EAGAIN;
+				return ret;
+			}
 
 			reg->bus.base = 0;
 			reg->bus.offset = handle;
diff --git a/drivers/gpu/drm/nouveau/nouveau_debugfs.c b/drivers/gpu/drm/nouveau/nouveau_debugfs.c
index 7dfbbbc..15a3d40 100644
--- a/drivers/gpu/drm/nouveau/nouveau_debugfs.c
+++ b/drivers/gpu/drm/nouveau/nouveau_debugfs.c
@@ -222,22 +222,18 @@ nouveau_drm_debugfs_init(struct drm_minor *minor)
 {
 	struct nouveau_drm *drm = nouveau_drm(minor->dev);
 	struct dentry *dentry;
-	int i, ret;
+	int i;
 
 	for (i = 0; i < ARRAY_SIZE(nouveau_debugfs_files); i++) {
-		dentry = debugfs_create_file(nouveau_debugfs_files[i].name,
-					     S_IRUGO | S_IWUSR,
-					     minor->debugfs_root, minor->dev,
-					     nouveau_debugfs_files[i].fops);
-		if (!dentry)
-			return -ENOMEM;
+		debugfs_create_file(nouveau_debugfs_files[i].name,
+				    S_IRUGO | S_IWUSR,
+				    minor->debugfs_root, minor->dev,
+				    nouveau_debugfs_files[i].fops);
 	}
 
-	ret = drm_debugfs_create_files(nouveau_debugfs_list,
-				       NOUVEAU_DEBUGFS_ENTRIES,
-				       minor->debugfs_root, minor);
-	if (ret)
-		return ret;
+	drm_debugfs_create_files(nouveau_debugfs_list,
+				 NOUVEAU_DEBUGFS_ENTRIES,
+				 minor->debugfs_root, minor);
 
 	/* Set the size of the vbios since we know it, and it's confusing to
 	 * userspace if it wants to seek() but the file has a length of 0
diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c
index 6b1629c..ca4087f 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_drm.c
@@ -618,6 +618,64 @@ nouveau_drm_device_fini(struct drm_device *dev)
 	kfree(drm);
 }
 
+/*
+ * On some Intel PCIe bridge controllers doing a
+ * D0 -> D3hot -> D3cold -> D0 sequence causes Nvidia GPUs to not reappear.
+ * Skipping the intermediate D3hot step seems to make it work again. This is
+ * probably caused by not meeting the expectation the involved AML code has
+ * when the GPU is put into D3hot state before invoking it.
+ *
+ * This leads to various manifestations of this issue:
+ *  - AML code execution to power on the GPU hits an infinite loop (as the
+ *    code waits on device memory to change).
+ *  - kernel crashes, as all PCI reads return -1, which most code isn't able
+ *    to handle well enough.
+ *
+ * In all cases dmesg will contain at least one line like this:
+ * 'nouveau 0000:01:00.0: Refused to change power state, currently in D3'
+ * followed by a lot of nouveau timeouts.
+ *
+ * In the \_SB.PCI0.PEG0.PG00._OFF code deeper down writes bit 0x80 to the not
+ * documented PCI config space register 0x248 of the Intel PCIe bridge
+ * controller (0x1901) in order to change the state of the PCIe link between
+ * the PCIe port and the GPU. There are alternative code paths using other
+ * registers, which seem to work fine (executed pre Windows 8):
+ *  - 0xbc bit 0x20 (publicly available documentation claims 'reserved')
+ *  - 0xb0 bit 0x10 (link disable)
+ * Changing the conditions inside the firmware by poking into the relevant
+ * addresses does resolve the issue, but it seemed to be ACPI private memory
+ * and not any device accessible memory at all, so there is no portable way of
+ * changing the conditions.
+ * On a XPS 9560 that means bits [0,3] on \CPEX need to be cleared.
+ *
+ * The only systems where this behavior can be seen are hybrid graphics laptops
+ * with a secondary Nvidia Maxwell, Pascal or Turing GPU. It's unclear whether
+ * this issue only occurs in combination with listed Intel PCIe bridge
+ * controllers and the mentioned GPUs or other devices as well.
+ *
+ * documentation on the PCIe bridge controller can be found in the
+ * "7th Generation Intel® Processor Families for H Platforms Datasheet Volume 2"
+ * Section "12 PCI Express* Controller (x16) Registers"
+ */
+
+static void quirk_broken_nv_runpm(struct pci_dev *pdev)
+{
+	struct drm_device *dev = pci_get_drvdata(pdev);
+	struct nouveau_drm *drm = nouveau_drm(dev);
+	struct pci_dev *bridge = pci_upstream_bridge(pdev);
+
+	if (!bridge || bridge->vendor != PCI_VENDOR_ID_INTEL)
+		return;
+
+	switch (bridge->device) {
+	case 0x1901:
+		drm->old_pm_cap = pdev->pm_cap;
+		pdev->pm_cap = 0;
+		NV_INFO(drm, "Disabling PCI power management to avoid bug\n");
+		break;
+	}
+}
+
 static int nouveau_drm_probe(struct pci_dev *pdev,
 			     const struct pci_device_id *pent)
 {
@@ -699,6 +757,7 @@ static int nouveau_drm_probe(struct pci_dev *pdev,
 	if (ret)
 		goto fail_drm_dev_init;
 
+	quirk_broken_nv_runpm(pdev);
 	return 0;
 
 fail_drm_dev_init:
@@ -734,7 +793,11 @@ static void
 nouveau_drm_remove(struct pci_dev *pdev)
 {
 	struct drm_device *dev = pci_get_drvdata(pdev);
+	struct nouveau_drm *drm = nouveau_drm(dev);
 
+	/* revert our workaround */
+	if (drm->old_pm_cap)
+		pdev->pm_cap = drm->old_pm_cap;
 	nouveau_drm_device_remove(dev);
 	pci_disable_device(pdev);
 }
diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h
index c2c332f..2a65197 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drv.h
+++ b/drivers/gpu/drm/nouveau/nouveau_drv.h
@@ -140,6 +140,8 @@ struct nouveau_drm {
 
 	struct list_head clients;
 
+	u8 old_pm_cap;
+
 	struct {
 		struct agp_bridge_data *bridge;
 		u32 base;
diff --git a/drivers/gpu/drm/nouveau/nouveau_svm.c b/drivers/gpu/drm/nouveau/nouveau_svm.c
index e3797b2..645fedd 100644
--- a/drivers/gpu/drm/nouveau/nouveau_svm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_svm.c
@@ -171,6 +171,11 @@ nouveau_svmm_bind(struct drm_device *dev, void *data,
 	mm = get_task_mm(current);
 	down_read(&mm->mmap_sem);
 
+	if (!cli->svm.svmm) {
+		up_read(&mm->mmap_sem);
+		return -EINVAL;
+	}
+
 	for (addr = args->va_start, end = args->va_start + size; addr < end;) {
 		struct vm_area_struct *vma;
 		unsigned long next;
@@ -179,6 +184,7 @@ nouveau_svmm_bind(struct drm_device *dev, void *data,
 		if (!vma)
 			break;
 
+		addr = max(addr, vma->vm_start);
 		next = min(vma->vm_end, end);
 		/* This is a best effort so we ignore errors */
 		nouveau_dmem_migrate_vma(cli->drm, vma, addr, next);
@@ -656,9 +662,6 @@ nouveau_svm_fault(struct nvif_notify *notify)
 		limit = start + (ARRAY_SIZE(args.phys) << PAGE_SHIFT);
 		if (start < svmm->unmanaged.limit)
 			limit = min_t(u64, limit, svmm->unmanaged.start);
-		else
-		if (limit > svmm->unmanaged.start)
-			start = max_t(u64, start, svmm->unmanaged.limit);
 		SVMM_DBG(svmm, "wndw %016llx-%016llx", start, limit);
 
 		mm = svmm->notifier.mm;
diff --git a/drivers/gpu/drm/nouveau/nvif/Kbuild b/drivers/gpu/drm/nouveau/nvif/Kbuild
index 50d583d..f194d35 100644
--- a/drivers/gpu/drm/nouveau/nvif/Kbuild
+++ b/drivers/gpu/drm/nouveau/nvif/Kbuild
@@ -8,6 +8,7 @@
 nvif-y += nvif/mem.o
 nvif-y += nvif/mmu.o
 nvif-y += nvif/notify.o
+nvif-y += nvif/timer.o
 nvif-y += nvif/vmm.o
 
 # Usermode classes
diff --git a/drivers/gpu/drm/nouveau/nvif/device.c b/drivers/gpu/drm/nouveau/nvif/device.c
index 1ec101b..0e92db4 100644
--- a/drivers/gpu/drm/nouveau/nvif/device.c
+++ b/drivers/gpu/drm/nouveau/nvif/device.c
@@ -27,11 +27,15 @@
 u64
 nvif_device_time(struct nvif_device *device)
 {
-	struct nv_device_time_v0 args = {};
-	int ret = nvif_object_mthd(&device->object, NV_DEVICE_V0_TIME,
-				   &args, sizeof(args));
-	WARN_ON_ONCE(ret != 0);
-	return args.time;
+	if (!device->user.func) {
+		struct nv_device_time_v0 args = {};
+		int ret = nvif_object_mthd(&device->object, NV_DEVICE_V0_TIME,
+					   &args, sizeof(args));
+		WARN_ON_ONCE(ret != 0);
+		return args.time;
+	}
+
+	return device->user.func->time(&device->user);
 }
 
 void
diff --git a/drivers/gpu/drm/nouveau/nvif/timer.c b/drivers/gpu/drm/nouveau/nvif/timer.c
new file mode 100644
index 0000000..602c1a2
--- /dev/null
+++ b/drivers/gpu/drm/nouveau/nvif/timer.c
@@ -0,0 +1,56 @@
+/*
+ * Copyright 2020 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <nvif/timer.h>
+#include <nvif/device.h>
+
+s64
+nvif_timer_wait_test(struct nvif_timer_wait *wait)
+{
+	u64 time = nvif_device_time(wait->device);
+
+	if (wait->reads == 0) {
+		wait->time0 = time;
+		wait->time1 = time;
+	}
+
+	if (wait->time1 == time) {
+		if (WARN_ON(wait->reads++ == 16))
+			return -ETIMEDOUT;
+	} else {
+		wait->time1 = time;
+		wait->reads = 1;
+	}
+
+	if (wait->time1 - wait->time0 > wait->limit)
+		return -ETIMEDOUT;
+
+	return wait->time1 - wait->time0;
+}
+
+void
+nvif_timer_wait_init(struct nvif_device *device, u64 nsec,
+		     struct nvif_timer_wait *wait)
+{
+	wait->device = device;
+	wait->limit = nsec;
+	wait->reads = 0;
+}
diff --git a/drivers/gpu/drm/nouveau/nvif/userc361.c b/drivers/gpu/drm/nouveau/nvif/userc361.c
index 19f9958..1116f87 100644
--- a/drivers/gpu/drm/nouveau/nvif/userc361.c
+++ b/drivers/gpu/drm/nouveau/nvif/userc361.c
@@ -21,6 +21,19 @@
  */
 #include <nvif/user.h>
 
+static u64
+nvif_userc361_time(struct nvif_user *user)
+{
+	u32 hi, lo;
+
+	do {
+		hi = nvif_rd32(&user->object, 0x084);
+		lo = nvif_rd32(&user->object, 0x080);
+	} while (hi != nvif_rd32(&user->object, 0x084));
+
+	return ((u64)hi << 32 | lo);
+}
+
 static void
 nvif_userc361_doorbell(struct nvif_user *user, u32 token)
 {
@@ -30,4 +43,5 @@ nvif_userc361_doorbell(struct nvif_user *user, u32 token)
 const struct nvif_user_func
 nvif_userc361 = {
 	.doorbell = nvif_userc361_doorbell,
+	.time = nvif_userc361_time,
 };
diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/gr/gf100.c b/drivers/gpu/drm/nouveau/nvkm/engine/gr/gf100.c
index dd8f85b..f2f5636 100644
--- a/drivers/gpu/drm/nouveau/nvkm/engine/gr/gf100.c
+++ b/drivers/gpu/drm/nouveau/nvkm/engine/gr/gf100.c
@@ -1981,8 +1981,34 @@ gf100_gr_init_(struct nvkm_gr *base)
 {
 	struct gf100_gr *gr = gf100_gr(base);
 	struct nvkm_subdev *subdev = &base->engine.subdev;
+	struct nvkm_device *device = subdev->device;
+	bool reset = device->chipset == 0x137 || device->chipset == 0x138;
 	u32 ret;
 
+	/* On certain GP107/GP108 boards, we trigger a weird issue where
+	 * GR will stop responding to PRI accesses after we've asked the
+	 * SEC2 RTOS to boot the GR falcons.  This happens with far more
+	 * frequency when cold-booting a board (ie. returning from D3).
+	 *
+	 * The root cause for this is not known and has proven difficult
+	 * to isolate, with many avenues being dead-ends.
+	 *
+	 * A workaround was discovered by Karol, whereby putting GR into
+	 * reset for an extended period right before initialisation
+	 * prevents the problem from occuring.
+	 *
+	 * XXX: As RM does not require any such workaround, this is more
+	 *      of a hack than a true fix.
+	 */
+	reset = nvkm_boolopt(device->cfgopt, "NvGrResetWar", reset);
+	if (reset) {
+		nvkm_mask(device, 0x000200, 0x00001000, 0x00000000);
+		nvkm_rd32(device, 0x000200);
+		msleep(50);
+		nvkm_mask(device, 0x000200, 0x00001000, 0x00001000);
+		nvkm_rd32(device, 0x000200);
+	}
+
 	nvkm_pmu_pgob(gr->base.engine.subdev.device->pmu, false);
 
 	ret = nvkm_falcon_get(&gr->fecs.falcon, subdev);
diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/sec2/gp108.c b/drivers/gpu/drm/nouveau/nvkm/engine/sec2/gp108.c
index 232a9d7..e770c94 100644
--- a/drivers/gpu/drm/nouveau/nvkm/engine/sec2/gp108.c
+++ b/drivers/gpu/drm/nouveau/nvkm/engine/sec2/gp108.c
@@ -25,6 +25,9 @@
 MODULE_FIRMWARE("nvidia/gp108/sec2/desc.bin");
 MODULE_FIRMWARE("nvidia/gp108/sec2/image.bin");
 MODULE_FIRMWARE("nvidia/gp108/sec2/sig.bin");
+MODULE_FIRMWARE("nvidia/gv100/sec2/desc.bin");
+MODULE_FIRMWARE("nvidia/gv100/sec2/image.bin");
+MODULE_FIRMWARE("nvidia/gv100/sec2/sig.bin");
 
 static const struct nvkm_sec2_fwif
 gp108_sec2_fwif[] = {
diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/sec2/tu102.c b/drivers/gpu/drm/nouveau/nvkm/engine/sec2/tu102.c
index b6ebd95..a829565 100644
--- a/drivers/gpu/drm/nouveau/nvkm/engine/sec2/tu102.c
+++ b/drivers/gpu/drm/nouveau/nvkm/engine/sec2/tu102.c
@@ -56,6 +56,22 @@ tu102_sec2_nofw(struct nvkm_sec2 *sec2, int ver,
 	return 0;
 }
 
+MODULE_FIRMWARE("nvidia/tu102/sec2/desc.bin");
+MODULE_FIRMWARE("nvidia/tu102/sec2/image.bin");
+MODULE_FIRMWARE("nvidia/tu102/sec2/sig.bin");
+MODULE_FIRMWARE("nvidia/tu104/sec2/desc.bin");
+MODULE_FIRMWARE("nvidia/tu104/sec2/image.bin");
+MODULE_FIRMWARE("nvidia/tu104/sec2/sig.bin");
+MODULE_FIRMWARE("nvidia/tu106/sec2/desc.bin");
+MODULE_FIRMWARE("nvidia/tu106/sec2/image.bin");
+MODULE_FIRMWARE("nvidia/tu106/sec2/sig.bin");
+MODULE_FIRMWARE("nvidia/tu116/sec2/desc.bin");
+MODULE_FIRMWARE("nvidia/tu116/sec2/image.bin");
+MODULE_FIRMWARE("nvidia/tu116/sec2/sig.bin");
+MODULE_FIRMWARE("nvidia/tu117/sec2/desc.bin");
+MODULE_FIRMWARE("nvidia/tu117/sec2/image.bin");
+MODULE_FIRMWARE("nvidia/tu117/sec2/sig.bin");
+
 static const struct nvkm_sec2_fwif
 tu102_sec2_fwif[] = {
 	{  0, gp102_sec2_load, &tu102_sec2, &gp102_sec2_acr_1 },
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadowpci.c b/drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadowpci.c
index 9b91da0..8d9812a 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadowpci.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadowpci.c
@@ -101,9 +101,13 @@ platform_init(struct nvkm_bios *bios, const char *name)
 	else
 		return ERR_PTR(-ENODEV);
 
+	if (!pdev->rom || pdev->romlen == 0)
+		return ERR_PTR(-ENODEV);
+
 	if ((priv = kmalloc(sizeof(*priv), GFP_KERNEL))) {
+		priv->size = pdev->romlen;
 		if (ret = -ENODEV,
-		    (priv->rom = pci_platform_rom(pdev, &priv->size)))
+		    (priv->rom = ioremap(pdev->rom, pdev->romlen)))
 			return priv;
 		kfree(priv);
 	}
@@ -111,11 +115,20 @@ platform_init(struct nvkm_bios *bios, const char *name)
 	return ERR_PTR(ret);
 }
 
+static void
+platform_fini(void *data)
+{
+	struct priv *priv = data;
+
+	iounmap(priv->rom);
+	kfree(priv);
+}
+
 const struct nvbios_source
 nvbios_platform = {
 	.name = "PLATFORM",
 	.init = platform_init,
-	.fini = (void(*)(void *))kfree,
+	.fini = platform_fini,
 	.read = pcirom_read,
 	.rw = true,
 };
diff --git a/drivers/gpu/drm/omapdrm/dss/dss.c b/drivers/gpu/drm/omapdrm/dss/dss.c
index b76fc2b..4d5739f 100644
--- a/drivers/gpu/drm/omapdrm/dss/dss.c
+++ b/drivers/gpu/drm/omapdrm/dss/dss.c
@@ -1348,9 +1348,15 @@ static int dss_component_compare(struct device *dev, void *data)
 	return dev == child;
 }
 
+struct dss_component_match_data {
+	struct device *dev;
+	struct component_match **match;
+};
+
 static int dss_add_child_component(struct device *dev, void *data)
 {
-	struct component_match **match = data;
+	struct dss_component_match_data *cmatch = data;
+	struct component_match **match = cmatch->match;
 
 	/*
 	 * HACK
@@ -1361,7 +1367,17 @@ static int dss_add_child_component(struct device *dev, void *data)
 	if (strstr(dev_name(dev), "rfbi"))
 		return 0;
 
-	component_match_add(dev->parent, match, dss_component_compare, dev);
+	/*
+	 * Handle possible interconnect target modules defined within the DSS.
+	 * The DSS components can be children of an interconnect target module
+	 * after the device tree has been updated for the module data.
+	 * See also omapdss_boot_init() for compatible fixup.
+	 */
+	if (strstr(dev_name(dev), "target-module"))
+		return device_for_each_child(dev, cmatch,
+					     dss_add_child_component);
+
+	component_match_add(cmatch->dev, match, dss_component_compare, dev);
 
 	return 0;
 }
@@ -1404,6 +1420,7 @@ static int dss_probe_hardware(struct dss_device *dss)
 static int dss_probe(struct platform_device *pdev)
 {
 	const struct soc_device_attribute *soc;
+	struct dss_component_match_data cmatch;
 	struct component_match *match = NULL;
 	struct resource *dss_mem;
 	struct dss_device *dss;
@@ -1481,7 +1498,9 @@ static int dss_probe(struct platform_device *pdev)
 
 	omapdss_gather_components(&pdev->dev);
 
-	device_for_each_child(&pdev->dev, &match, dss_add_child_component);
+	cmatch.dev = &pdev->dev;
+	cmatch.match = &match;
+	device_for_each_child(&pdev->dev, &cmatch, dss_add_child_component);
 
 	r = component_master_add_with_match(&pdev->dev, &dss_component_ops, match);
 	if (r)
diff --git a/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c b/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c
index 00372f4..72a7da7 100644
--- a/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c
+++ b/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c
@@ -178,9 +178,24 @@ static const struct of_device_id omapdss_of_fixups_whitelist[] __initconst = {
 	{},
 };
 
+static void __init omapdss_find_children(struct device_node *np)
+{
+	struct device_node *child;
+
+	for_each_available_child_of_node(np, child) {
+		if (!of_find_property(child, "compatible", NULL))
+			continue;
+
+		omapdss_walk_device(child, true);
+
+		if (of_device_is_compatible(child, "ti,sysc"))
+			omapdss_find_children(child);
+	}
+}
+
 static int __init omapdss_boot_init(void)
 {
-	struct device_node *dss, *child;
+	struct device_node *dss;
 
 	INIT_LIST_HEAD(&dss_conv_list);
 
@@ -190,13 +205,7 @@ static int __init omapdss_boot_init(void)
 		goto put_node;
 
 	omapdss_walk_device(dss, true);
-
-	for_each_available_child_of_node(dss, child) {
-		if (!of_find_property(child, "compatible", NULL))
-			continue;
-
-		omapdss_walk_device(child, true);
-	}
+	omapdss_find_children(dss);
 
 	while (!list_empty(&dss_conv_list)) {
 		struct dss_conv_node *n;
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 0ce81b1..3ad828e 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -361,7 +361,6 @@ static int panel_dpi_probe(struct device *dev,
 	struct panel_desc *desc;
 	unsigned int bus_flags;
 	struct videomode vm;
-	const char *mapping;
 	int ret;
 
 	np = dev->of_node;
@@ -386,16 +385,6 @@ static int panel_dpi_probe(struct device *dev,
 	of_property_read_u32(np, "width-mm", &desc->size.width);
 	of_property_read_u32(np, "height-mm", &desc->size.height);
 
-	of_property_read_string(np, "data-mapping", &mapping);
-	if (!strcmp(mapping, "rgb24"))
-		desc->bus_format = MEDIA_BUS_FMT_RGB888_1X24;
-	else if (!strcmp(mapping, "rgb565"))
-		desc->bus_format = MEDIA_BUS_FMT_RGB565_1X16;
-	else if (!strcmp(mapping, "bgr666"))
-		desc->bus_format = MEDIA_BUS_FMT_RGB666_1X18;
-	else if (!strcmp(mapping, "lvds666"))
-		desc->bus_format = MEDIA_BUS_FMT_RGB666_1X24_CPADHI;
-
 	/* Extract bus_flags from display_timing */
 	bus_flags = 0;
 	vm.flags = timing->flags;
diff --git a/drivers/gpu/drm/radeon/.gitignore b/drivers/gpu/drm/radeon/.gitignore
index 403eb3a..9c1a941 100644
--- a/drivers/gpu/drm/radeon/.gitignore
+++ b/drivers/gpu/drm/radeon/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 mkregtable
 *_reg_safe.h
 
diff --git a/drivers/gpu/drm/radeon/radeon_bios.c b/drivers/gpu/drm/radeon/radeon_bios.c
index c42f73f..bb29cf0 100644
--- a/drivers/gpu/drm/radeon/radeon_bios.c
+++ b/drivers/gpu/drm/radeon/radeon_bios.c
@@ -108,25 +108,33 @@ static bool radeon_read_bios(struct radeon_device *rdev)
 
 static bool radeon_read_platform_bios(struct radeon_device *rdev)
 {
-	uint8_t __iomem *bios;
-	size_t size;
+	phys_addr_t rom = rdev->pdev->rom;
+	size_t romlen = rdev->pdev->romlen;
+	void __iomem *bios;
 
 	rdev->bios = NULL;
 
-	bios = pci_platform_rom(rdev->pdev, &size);
-	if (!bios) {
+	if (!rom || romlen == 0)
 		return false;
-	}
 
-	if (size == 0 || bios[0] != 0x55 || bios[1] != 0xaa) {
+	rdev->bios = kzalloc(romlen, GFP_KERNEL);
+	if (!rdev->bios)
 		return false;
-	}
-	rdev->bios = kmemdup(bios, size, GFP_KERNEL);
-	if (rdev->bios == NULL) {
-		return false;
-	}
+
+	bios = ioremap(rom, romlen);
+	if (!bios)
+		goto free_bios;
+
+	memcpy_fromio(rdev->bios, bios, romlen);
+	iounmap(bios);
+
+	if (rdev->bios[0] != 0x55 || rdev->bios[1] != 0xaa)
+		goto free_bios;
 
 	return true;
+free_bios:
+	kfree(rdev->bios);
+	return false;
 }
 
 #ifdef CONFIG_ACPI
diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
index f38f5e1..ce98c08 100644
--- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
+++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
@@ -325,15 +325,9 @@ static int rockchip_dp_bind(struct device *dev, struct device *master,
 			    void *data)
 {
 	struct rockchip_dp_device *dp = dev_get_drvdata(dev);
-	const struct rockchip_dp_chip_data *dp_data;
 	struct drm_device *drm_dev = data;
 	int ret;
 
-	dp_data = of_device_get_match_data(dev);
-	if (!dp_data)
-		return -ENODEV;
-
-	dp->data = dp_data;
 	dp->drm_dev = drm_dev;
 
 	ret = rockchip_dp_drm_create_encoder(dp);
@@ -344,16 +338,9 @@ static int rockchip_dp_bind(struct device *dev, struct device *master,
 
 	dp->plat_data.encoder = &dp->encoder;
 
-	dp->plat_data.dev_type = dp->data->chip_type;
-	dp->plat_data.power_on_start = rockchip_dp_poweron_start;
-	dp->plat_data.power_off = rockchip_dp_powerdown;
-	dp->plat_data.get_modes = rockchip_dp_get_modes;
-
-	dp->adp = analogix_dp_bind(dev, dp->drm_dev, &dp->plat_data);
-	if (IS_ERR(dp->adp)) {
-		ret = PTR_ERR(dp->adp);
+	ret = analogix_dp_bind(dp->adp, drm_dev);
+	if (ret)
 		goto err_cleanup_encoder;
-	}
 
 	return 0;
 err_cleanup_encoder:
@@ -368,8 +355,6 @@ static void rockchip_dp_unbind(struct device *dev, struct device *master,
 
 	analogix_dp_unbind(dp->adp);
 	dp->encoder.funcs->destroy(&dp->encoder);
-
-	dp->adp = ERR_PTR(-ENODEV);
 }
 
 static const struct component_ops rockchip_dp_component_ops = {
@@ -380,10 +365,15 @@ static const struct component_ops rockchip_dp_component_ops = {
 static int rockchip_dp_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
+	const struct rockchip_dp_chip_data *dp_data;
 	struct drm_panel *panel = NULL;
 	struct rockchip_dp_device *dp;
 	int ret;
 
+	dp_data = of_device_get_match_data(dev);
+	if (!dp_data)
+		return -ENODEV;
+
 	ret = drm_of_find_panel_or_bridge(dev->of_node, 1, 0, &panel, NULL);
 	if (ret < 0)
 		return ret;
@@ -394,7 +384,12 @@ static int rockchip_dp_probe(struct platform_device *pdev)
 
 	dp->dev = dev;
 	dp->adp = ERR_PTR(-ENODEV);
+	dp->data = dp_data;
 	dp->plat_data.panel = panel;
+	dp->plat_data.dev_type = dp->data->chip_type;
+	dp->plat_data.power_on_start = rockchip_dp_poweron_start;
+	dp->plat_data.power_off = rockchip_dp_powerdown;
+	dp->plat_data.get_modes = rockchip_dp_get_modes;
 
 	ret = rockchip_dp_of_probe(dp);
 	if (ret < 0)
@@ -402,12 +397,19 @@ static int rockchip_dp_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, dp);
 
+	dp->adp = analogix_dp_probe(dev, &dp->plat_data);
+	if (IS_ERR(dp->adp))
+		return PTR_ERR(dp->adp);
+
 	return component_add(dev, &rockchip_dp_component_ops);
 }
 
 static int rockchip_dp_remove(struct platform_device *pdev)
 {
+	struct rockchip_dp_device *dp = platform_get_drvdata(pdev);
+
 	component_del(&pdev->dev, &rockchip_dp_component_ops);
+	analogix_dp_remove(dp->adp);
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/ttm/ttm_bo_vm.c b/drivers/gpu/drm/ttm/ttm_bo_vm.c
index cb8829c..0ad30b1 100644
--- a/drivers/gpu/drm/ttm/ttm_bo_vm.c
+++ b/drivers/gpu/drm/ttm/ttm_bo_vm.c
@@ -162,6 +162,89 @@ vm_fault_t ttm_bo_vm_reserve(struct ttm_buffer_object *bo,
 }
 EXPORT_SYMBOL(ttm_bo_vm_reserve);
 
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+/**
+ * ttm_bo_vm_insert_huge - Insert a pfn for PUD or PMD faults
+ * @vmf: Fault data
+ * @bo: The buffer object
+ * @page_offset: Page offset from bo start
+ * @fault_page_size: The size of the fault in pages.
+ * @pgprot: The page protections.
+ * Does additional checking whether it's possible to insert a PUD or PMD
+ * pfn and performs the insertion.
+ *
+ * Return: VM_FAULT_NOPAGE on successful insertion, VM_FAULT_FALLBACK if
+ * a huge fault was not possible, or on insertion error.
+ */
+static vm_fault_t ttm_bo_vm_insert_huge(struct vm_fault *vmf,
+					struct ttm_buffer_object *bo,
+					pgoff_t page_offset,
+					pgoff_t fault_page_size,
+					pgprot_t pgprot)
+{
+	pgoff_t i;
+	vm_fault_t ret;
+	unsigned long pfn;
+	pfn_t pfnt;
+	struct ttm_tt *ttm = bo->ttm;
+	bool write = vmf->flags & FAULT_FLAG_WRITE;
+
+	/* Fault should not cross bo boundary. */
+	page_offset &= ~(fault_page_size - 1);
+	if (page_offset + fault_page_size > bo->num_pages)
+		goto out_fallback;
+
+	if (bo->mem.bus.is_iomem)
+		pfn = ttm_bo_io_mem_pfn(bo, page_offset);
+	else
+		pfn = page_to_pfn(ttm->pages[page_offset]);
+
+	/* pfn must be fault_page_size aligned. */
+	if ((pfn & (fault_page_size - 1)) != 0)
+		goto out_fallback;
+
+	/* Check that memory is contiguous. */
+	if (!bo->mem.bus.is_iomem) {
+		for (i = 1; i < fault_page_size; ++i) {
+			if (page_to_pfn(ttm->pages[page_offset + i]) != pfn + i)
+				goto out_fallback;
+		}
+	} else if (bo->bdev->driver->io_mem_pfn) {
+		for (i = 1; i < fault_page_size; ++i) {
+			if (ttm_bo_io_mem_pfn(bo, page_offset + i) != pfn + i)
+				goto out_fallback;
+		}
+	}
+
+	pfnt = __pfn_to_pfn_t(pfn, PFN_DEV);
+	if (fault_page_size == (HPAGE_PMD_SIZE >> PAGE_SHIFT))
+		ret = vmf_insert_pfn_pmd_prot(vmf, pfnt, pgprot, write);
+#ifdef CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD
+	else if (fault_page_size == (HPAGE_PUD_SIZE >> PAGE_SHIFT))
+		ret = vmf_insert_pfn_pud_prot(vmf, pfnt, pgprot, write);
+#endif
+	else
+		WARN_ON_ONCE(ret = VM_FAULT_FALLBACK);
+
+	if (ret != VM_FAULT_NOPAGE)
+		goto out_fallback;
+
+	return VM_FAULT_NOPAGE;
+out_fallback:
+	count_vm_event(THP_FAULT_FALLBACK);
+	return VM_FAULT_FALLBACK;
+}
+#else
+static vm_fault_t ttm_bo_vm_insert_huge(struct vm_fault *vmf,
+					struct ttm_buffer_object *bo,
+					pgoff_t page_offset,
+					pgoff_t fault_page_size,
+					pgprot_t pgprot)
+{
+	return VM_FAULT_FALLBACK;
+}
+#endif
+
 /**
  * ttm_bo_vm_fault_reserved - TTM fault helper
  * @vmf: The struct vm_fault given as argument to the fault callback
@@ -169,6 +252,7 @@ EXPORT_SYMBOL(ttm_bo_vm_reserve);
  * @num_prefault: Maximum number of prefault pages. The caller may want to
  * specify this based on madvice settings and the size of the GPU object
  * backed by the memory.
+ * @fault_page_size: The size of the fault in pages.
  *
  * This function inserts one or more page table entries pointing to the
  * memory backing the buffer object, and then returns a return code
@@ -182,7 +266,8 @@ EXPORT_SYMBOL(ttm_bo_vm_reserve);
  */
 vm_fault_t ttm_bo_vm_fault_reserved(struct vm_fault *vmf,
 				    pgprot_t prot,
-				    pgoff_t num_prefault)
+				    pgoff_t num_prefault,
+				    pgoff_t fault_page_size)
 {
 	struct vm_area_struct *vma = vmf->vma;
 	struct ttm_buffer_object *bo = vma->vm_private_data;
@@ -274,6 +359,13 @@ vm_fault_t ttm_bo_vm_fault_reserved(struct vm_fault *vmf,
 		prot = pgprot_decrypted(prot);
 	}
 
+	/* We don't prefault on huge faults. Yet. */
+	if (IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE) && fault_page_size != 1) {
+		ret = ttm_bo_vm_insert_huge(vmf, bo, page_offset,
+					    fault_page_size, prot);
+		goto out_io_unlock;
+	}
+
 	/*
 	 * Speculatively prefault a number of pages. Only error on
 	 * first page.
@@ -340,7 +432,7 @@ vm_fault_t ttm_bo_vm_fault(struct vm_fault *vmf)
 		return ret;
 
 	prot = vma->vm_page_prot;
-	ret = ttm_bo_vm_fault_reserved(vmf, prot, TTM_BO_VM_NUM_PREFAULT);
+	ret = ttm_bo_vm_fault_reserved(vmf, prot, TTM_BO_VM_NUM_PREFAULT, 1);
 	if (ret == VM_FAULT_RETRY && !(vmf->flags & FAULT_FLAG_RETRY_NOWAIT))
 		return ret;
 
@@ -451,7 +543,7 @@ static const struct vm_operations_struct ttm_bo_vm_ops = {
 	.fault = ttm_bo_vm_fault,
 	.open = ttm_bo_vm_open,
 	.close = ttm_bo_vm_close,
-	.access = ttm_bo_vm_access
+	.access = ttm_bo_vm_access,
 };
 
 static struct ttm_buffer_object *ttm_bo_vm_lookup(struct ttm_bo_device *bdev,
diff --git a/drivers/gpu/drm/vboxvideo/vbox_drv.c b/drivers/gpu/drm/vboxvideo/vbox_drv.c
index 8512d97..ac8f75d 100644
--- a/drivers/gpu/drm/vboxvideo/vbox_drv.c
+++ b/drivers/gpu/drm/vboxvideo/vbox_drv.c
@@ -41,6 +41,10 @@ static int vbox_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (!vbox_check_supported(VBE_DISPI_ID_HGSMI))
 		return -ENODEV;
 
+	ret = drm_fb_helper_remove_conflicting_pci_framebuffers(pdev, "vboxvideodrmfb");
+	if (ret)
+		return ret;
+
 	vbox = kzalloc(sizeof(*vbox), GFP_KERNEL);
 	if (!vbox)
 		return -ENOMEM;
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index cea18dc..3407192 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -681,11 +681,23 @@ static enum drm_mode_status
 vc4_hdmi_encoder_mode_valid(struct drm_encoder *crtc,
 			    const struct drm_display_mode *mode)
 {
-	/* HSM clock must be 108% of the pixel clock.  Additionally,
-	 * the AXI clock needs to be at least 25% of pixel clock, but
-	 * HSM ends up being the limiting factor.
+	/*
+	 * As stated in RPi's vc4 firmware "HDMI state machine (HSM) clock must
+	 * be faster than pixel clock, infinitesimally faster, tested in
+	 * simulation. Otherwise, exact value is unimportant for HDMI
+	 * operation." This conflicts with bcm2835's vc4 documentation, which
+	 * states HSM's clock has to be at least 108% of the pixel clock.
+	 *
+	 * Real life tests reveal that vc4's firmware statement holds up, and
+	 * users are able to use pixel clocks closer to HSM's, namely for
+	 * 1920x1200@60Hz. So it was decided to have leave a 1% margin between
+	 * both clocks. Which, for RPi0-3 implies a maximum pixel clock of
+	 * 162MHz.
+	 *
+	 * Additionally, the AXI clock needs to be at least 25% of
+	 * pixel clock, but HSM ends up being the limiting factor.
 	 */
-	if (mode->clock > HSM_CLOCK_FREQ / (1000 * 108 / 100))
+	if (mode->clock > HSM_CLOCK_FREQ / (1000 * 101 / 100))
 		return MODE_CLOCK_HIGH;
 
 	return MODE_OK;
diff --git a/drivers/gpu/drm/virtio/virtgpu_object.c b/drivers/gpu/drm/virtio/virtgpu_object.c
index 2bfb13d..d9039bb 100644
--- a/drivers/gpu/drm/virtio/virtgpu_object.c
+++ b/drivers/gpu/drm/virtio/virtgpu_object.c
@@ -123,15 +123,17 @@ bool virtio_gpu_is_shmem(struct virtio_gpu_object *bo)
 struct drm_gem_object *virtio_gpu_create_object(struct drm_device *dev,
 						size_t size)
 {
-	struct virtio_gpu_object *bo;
+	struct virtio_gpu_object_shmem *shmem;
+	struct drm_gem_shmem_object *dshmem;
 
-	bo = kzalloc(sizeof(*bo), GFP_KERNEL);
-	if (!bo)
+	shmem = kzalloc(sizeof(*shmem), GFP_KERNEL);
+	if (!shmem)
 		return NULL;
 
-	bo->base.base.funcs = &virtio_gpu_shmem_funcs;
-	bo->base.map_cached = true;
-	return &bo->base.base;
+	dshmem = &shmem->base.base;
+	dshmem->base.funcs = &virtio_gpu_shmem_funcs;
+	dshmem->map_cached = true;
+	return &dshmem->base;
 }
 
 static int virtio_gpu_object_shmem_init(struct virtio_gpu_device *vgdev,
diff --git a/drivers/gpu/drm/vmwgfx/Makefile b/drivers/gpu/drm/vmwgfx/Makefile
index 5c3515e..31f85f0 100644
--- a/drivers/gpu/drm/vmwgfx/Makefile
+++ b/drivers/gpu/drm/vmwgfx/Makefile
@@ -11,4 +11,5 @@
 	    vmwgfx_validation.o vmwgfx_page_dirty.o vmwgfx_streamoutput.o \
 	    ttm_object.o ttm_lock.o
 
+vmwgfx-$(CONFIG_TRANSPARENT_HUGEPAGE) += vmwgfx_thp.o
 obj-$(CONFIG_DRM_VMWGFX) := vmwgfx.o
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
index 71e45b56..c2247a8 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
@@ -1247,6 +1247,18 @@ static void vmw_remove(struct pci_dev *pdev)
 	pci_disable_device(pdev);
 }
 
+static unsigned long
+vmw_get_unmapped_area(struct file *file, unsigned long uaddr,
+		      unsigned long len, unsigned long pgoff,
+		      unsigned long flags)
+{
+	struct drm_file *file_priv = file->private_data;
+	struct vmw_private *dev_priv = vmw_priv(file_priv->minor->dev);
+
+	return drm_get_unmapped_area(file, uaddr, len, pgoff, flags,
+				     &dev_priv->vma_manager);
+}
+
 static int vmwgfx_pm_notifier(struct notifier_block *nb, unsigned long val,
 			      void *ptr)
 {
@@ -1418,6 +1430,7 @@ static const struct file_operations vmwgfx_driver_fops = {
 	.compat_ioctl = vmw_compat_ioctl,
 #endif
 	.llseek = noop_llseek,
+	.get_unmapped_area = vmw_get_unmapped_area,
 };
 
 static struct drm_driver driver = {
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
index 5ddbcb9..8cdcd6e 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
@@ -1000,6 +1000,7 @@ extern int vmw_mmap(struct file *filp, struct vm_area_struct *vma);
 
 extern void vmw_validation_mem_init_ttm(struct vmw_private *dev_priv,
 					size_t gran);
+
 /**
  * TTM buffer object driver - vmwgfx_ttm_buffer.c
  */
@@ -1510,6 +1511,17 @@ void vmw_bo_dirty_unmap(struct vmw_buffer_object *vbo,
 			pgoff_t start, pgoff_t end);
 vm_fault_t vmw_bo_vm_fault(struct vm_fault *vmf);
 vm_fault_t vmw_bo_vm_mkwrite(struct vm_fault *vmf);
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+vm_fault_t vmw_bo_vm_huge_fault(struct vm_fault *vmf,
+				enum page_entry_size pe_size);
+#endif
+
+/* Transparent hugepage support - vmwgfx_thp.c */
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+extern const struct ttm_mem_type_manager_func vmw_thp_func;
+#else
+#define vmw_thp_func ttm_bo_manager_func
+#endif
 
 /**
  * VMW_DEBUG_KMS - Debug output for kernel mode-setting
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_page_dirty.c b/drivers/gpu/drm/vmwgfx/vmwgfx_page_dirty.c
index 60cfbfa..d4d66532 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_page_dirty.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_page_dirty.c
@@ -473,11 +473,11 @@ vm_fault_t vmw_bo_vm_fault(struct vm_fault *vmf)
 	 * a lot of unnecessary write faults.
 	 */
 	if (vbo->dirty && vbo->dirty->method == VMW_BO_DIRTY_MKWRITE)
-		prot = vma->vm_page_prot;
+		prot = vm_get_page_prot(vma->vm_flags & ~VM_SHARED);
 	else
 		prot = vm_get_page_prot(vma->vm_flags);
 
-	ret = ttm_bo_vm_fault_reserved(vmf, prot, num_prefault);
+	ret = ttm_bo_vm_fault_reserved(vmf, prot, num_prefault, 1);
 	if (ret == VM_FAULT_RETRY && !(vmf->flags & FAULT_FLAG_RETRY_NOWAIT))
 		return ret;
 
@@ -486,3 +486,75 @@ vm_fault_t vmw_bo_vm_fault(struct vm_fault *vmf)
 
 	return ret;
 }
+
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+vm_fault_t vmw_bo_vm_huge_fault(struct vm_fault *vmf,
+				enum page_entry_size pe_size)
+{
+	struct vm_area_struct *vma = vmf->vma;
+	struct ttm_buffer_object *bo = (struct ttm_buffer_object *)
+	    vma->vm_private_data;
+	struct vmw_buffer_object *vbo =
+		container_of(bo, struct vmw_buffer_object, base);
+	pgprot_t prot;
+	vm_fault_t ret;
+	pgoff_t fault_page_size;
+	bool write = vmf->flags & FAULT_FLAG_WRITE;
+	bool is_cow_mapping =
+		(vma->vm_flags & (VM_SHARED | VM_MAYWRITE)) == VM_MAYWRITE;
+
+	switch (pe_size) {
+	case PE_SIZE_PMD:
+		fault_page_size = HPAGE_PMD_SIZE >> PAGE_SHIFT;
+		break;
+#ifdef CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD
+	case PE_SIZE_PUD:
+		fault_page_size = HPAGE_PUD_SIZE >> PAGE_SHIFT;
+		break;
+#endif
+	default:
+		WARN_ON_ONCE(1);
+		return VM_FAULT_FALLBACK;
+	}
+
+	/* Always do write dirty-tracking and COW on PTE level. */
+	if (write && (READ_ONCE(vbo->dirty) || is_cow_mapping))
+		return VM_FAULT_FALLBACK;
+
+	ret = ttm_bo_vm_reserve(bo, vmf);
+	if (ret)
+		return ret;
+
+	if (vbo->dirty) {
+		pgoff_t allowed_prefault;
+		unsigned long page_offset;
+
+		page_offset = vmf->pgoff -
+			drm_vma_node_start(&bo->base.vma_node);
+		if (page_offset >= bo->num_pages ||
+		    vmw_resources_clean(vbo, page_offset,
+					page_offset + PAGE_SIZE,
+					&allowed_prefault)) {
+			ret = VM_FAULT_SIGBUS;
+			goto out_unlock;
+		}
+
+		/*
+		 * Write protect, so we get a new fault on write, and can
+		 * split.
+		 */
+		prot = vm_get_page_prot(vma->vm_flags & ~VM_SHARED);
+	} else {
+		prot = vm_get_page_prot(vma->vm_flags);
+	}
+
+	ret = ttm_bo_vm_fault_reserved(vmf, prot, 1, fault_page_size);
+	if (ret == VM_FAULT_RETRY && !(vmf->flags & FAULT_FLAG_RETRY_NOWAIT))
+		return ret;
+
+out_unlock:
+	dma_resv_unlock(bo->base.resv);
+
+	return ret;
+}
+#endif
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_thp.c b/drivers/gpu/drm/vmwgfx/vmwgfx_thp.c
new file mode 100644
index 0000000..b7c816b
--- /dev/null
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_thp.c
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Huge page-table-entry support for IO memory.
+ *
+ * Copyright (C) 2007-2019 Vmware, Inc. All rights reservedd.
+ */
+#include "vmwgfx_drv.h"
+#include <drm/ttm/ttm_module.h>
+#include <drm/ttm/ttm_bo_driver.h>
+#include <drm/ttm/ttm_placement.h>
+
+/**
+ * struct vmw_thp_manager - Range manager implementing huge page alignment
+ *
+ * @mm: The underlying range manager. Protected by @lock.
+ * @lock: Manager lock.
+ */
+struct vmw_thp_manager {
+	struct drm_mm mm;
+	spinlock_t lock;
+};
+
+static int vmw_thp_insert_aligned(struct drm_mm *mm, struct drm_mm_node *node,
+				  unsigned long align_pages,
+				  const struct ttm_place *place,
+				  struct ttm_mem_reg *mem,
+				  unsigned long lpfn,
+				  enum drm_mm_insert_mode mode)
+{
+	if (align_pages >= mem->page_alignment &&
+	    (!mem->page_alignment || align_pages % mem->page_alignment == 0)) {
+		return drm_mm_insert_node_in_range(mm, node,
+						   mem->num_pages,
+						   align_pages, 0,
+						   place->fpfn, lpfn, mode);
+	}
+
+	return -ENOSPC;
+}
+
+static int vmw_thp_get_node(struct ttm_mem_type_manager *man,
+			    struct ttm_buffer_object *bo,
+			    const struct ttm_place *place,
+			    struct ttm_mem_reg *mem)
+{
+	struct vmw_thp_manager *rman = (struct vmw_thp_manager *) man->priv;
+	struct drm_mm *mm = &rman->mm;
+	struct drm_mm_node *node;
+	unsigned long align_pages;
+	unsigned long lpfn;
+	enum drm_mm_insert_mode mode = DRM_MM_INSERT_BEST;
+	int ret;
+
+	node = kzalloc(sizeof(*node), GFP_KERNEL);
+	if (!node)
+		return -ENOMEM;
+
+	lpfn = place->lpfn;
+	if (!lpfn)
+		lpfn = man->size;
+
+	mode = DRM_MM_INSERT_BEST;
+	if (place->flags & TTM_PL_FLAG_TOPDOWN)
+		mode = DRM_MM_INSERT_HIGH;
+
+	spin_lock(&rman->lock);
+	if (IS_ENABLED(CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD)) {
+		align_pages = (HPAGE_PUD_SIZE >> PAGE_SHIFT);
+		if (mem->num_pages >= align_pages) {
+			ret = vmw_thp_insert_aligned(mm, node, align_pages,
+						     place, mem, lpfn, mode);
+			if (!ret)
+				goto found_unlock;
+		}
+	}
+
+	align_pages = (HPAGE_PMD_SIZE >> PAGE_SHIFT);
+	if (mem->num_pages >= align_pages) {
+		ret = vmw_thp_insert_aligned(mm, node, align_pages, place, mem,
+					     lpfn, mode);
+		if (!ret)
+			goto found_unlock;
+	}
+
+	ret = drm_mm_insert_node_in_range(mm, node, mem->num_pages,
+					  mem->page_alignment, 0,
+					  place->fpfn, lpfn, mode);
+found_unlock:
+	spin_unlock(&rman->lock);
+
+	if (unlikely(ret)) {
+		kfree(node);
+	} else {
+		mem->mm_node = node;
+		mem->start = node->start;
+	}
+
+	return 0;
+}
+
+
+
+static void vmw_thp_put_node(struct ttm_mem_type_manager *man,
+			     struct ttm_mem_reg *mem)
+{
+	struct vmw_thp_manager *rman = (struct vmw_thp_manager *) man->priv;
+
+	if (mem->mm_node) {
+		spin_lock(&rman->lock);
+		drm_mm_remove_node(mem->mm_node);
+		spin_unlock(&rman->lock);
+
+		kfree(mem->mm_node);
+		mem->mm_node = NULL;
+	}
+}
+
+static int vmw_thp_init(struct ttm_mem_type_manager *man,
+			unsigned long p_size)
+{
+	struct vmw_thp_manager *rman;
+
+	rman = kzalloc(sizeof(*rman), GFP_KERNEL);
+	if (!rman)
+		return -ENOMEM;
+
+	drm_mm_init(&rman->mm, 0, p_size);
+	spin_lock_init(&rman->lock);
+	man->priv = rman;
+	return 0;
+}
+
+static int vmw_thp_takedown(struct ttm_mem_type_manager *man)
+{
+	struct vmw_thp_manager *rman = (struct vmw_thp_manager *) man->priv;
+	struct drm_mm *mm = &rman->mm;
+
+	spin_lock(&rman->lock);
+	if (drm_mm_clean(mm)) {
+		drm_mm_takedown(mm);
+		spin_unlock(&rman->lock);
+		kfree(rman);
+		man->priv = NULL;
+		return 0;
+	}
+	spin_unlock(&rman->lock);
+	return -EBUSY;
+}
+
+static void vmw_thp_debug(struct ttm_mem_type_manager *man,
+			  struct drm_printer *printer)
+{
+	struct vmw_thp_manager *rman = (struct vmw_thp_manager *) man->priv;
+
+	spin_lock(&rman->lock);
+	drm_mm_print(&rman->mm, printer);
+	spin_unlock(&rman->lock);
+}
+
+const struct ttm_mem_type_manager_func vmw_thp_func = {
+	.init = vmw_thp_init,
+	.takedown = vmw_thp_takedown,
+	.get_node = vmw_thp_get_node,
+	.put_node = vmw_thp_put_node,
+	.debug = vmw_thp_debug
+};
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ttm_buffer.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ttm_buffer.c
index 3f3b2c7..bf0bc46 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_ttm_buffer.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ttm_buffer.c
@@ -749,7 +749,7 @@ static int vmw_init_mem_type(struct ttm_bo_device *bdev, uint32_t type,
 		break;
 	case TTM_PL_VRAM:
 		/* "On-card" video ram */
-		man->func = &ttm_bo_manager_func;
+		man->func = &vmw_thp_func;
 		man->gpu_offset = 0;
 		man->flags = TTM_MEMTYPE_FLAG_FIXED | TTM_MEMTYPE_FLAG_MAPPABLE;
 		man->available_caching = TTM_PL_FLAG_CACHED;
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ttm_glue.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ttm_glue.c
index aa7e50f..3c03b17 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_ttm_glue.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ttm_glue.c
@@ -34,7 +34,10 @@ int vmw_mmap(struct file *filp, struct vm_area_struct *vma)
 		.page_mkwrite = vmw_bo_vm_mkwrite,
 		.fault = vmw_bo_vm_fault,
 		.open = ttm_bo_vm_open,
-		.close = ttm_bo_vm_close
+		.close = ttm_bo_vm_close,
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+		.huge_fault = vmw_bo_vm_huge_fault,
+#endif
 	};
 	struct drm_file *file_priv = filp->private_data;
 	struct vmw_private *dev_priv = vmw_priv(file_priv->minor->dev);
diff --git a/drivers/gpu/drm/xen/xen_drm_front.c b/drivers/gpu/drm/xen/xen_drm_front.c
index 4be49c1..3741420 100644
--- a/drivers/gpu/drm/xen/xen_drm_front.c
+++ b/drivers/gpu/drm/xen/xen_drm_front.c
@@ -401,7 +401,7 @@ static int xen_drm_drv_dumb_create(struct drm_file *filp,
 
 	obj = xen_drm_front_gem_create(dev, args->size);
 	if (IS_ERR_OR_NULL(obj)) {
-		ret = PTR_ERR(obj);
+		ret = PTR_ERR_OR_ZERO(obj);
 		goto fail;
 	}
 
diff --git a/drivers/gpu/trace/Kconfig b/drivers/gpu/trace/Kconfig
new file mode 100644
index 0000000..c24e9ed
--- /dev/null
+++ b/drivers/gpu/trace/Kconfig
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+config TRACE_GPU_MEM
+	bool
diff --git a/drivers/gpu/trace/Makefile b/drivers/gpu/trace/Makefile
new file mode 100644
index 0000000..b70fbdc
--- /dev/null
+++ b/drivers/gpu/trace/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_TRACE_GPU_MEM) += trace_gpu_mem.o
diff --git a/drivers/gpu/trace/trace_gpu_mem.c b/drivers/gpu/trace/trace_gpu_mem.c
new file mode 100644
index 0000000..01e8558
--- /dev/null
+++ b/drivers/gpu/trace/trace_gpu_mem.c
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * GPU memory trace points
+ *
+ * Copyright (C) 2020 Google, Inc.
+ */
+
+#include <linux/module.h>
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/gpu_mem.h>
+
+EXPORT_TRACEPOINT_SYMBOL(gpu_mem_total);
diff --git a/drivers/hv/channel_mgmt.c b/drivers/hv/channel_mgmt.c
index 0370364..501c43c 100644
--- a/drivers/hv/channel_mgmt.c
+++ b/drivers/hv/channel_mgmt.c
@@ -839,6 +839,9 @@ void vmbus_initiate_unload(bool crash)
 {
 	struct vmbus_channel_message_header hdr;
 
+	if (xchg(&vmbus_connection.conn_state, DISCONNECTED) == DISCONNECTED)
+		return;
+
 	/* Pre-Win2012R2 hosts don't support reconnect */
 	if (vmbus_proto_version < VERSION_WIN8_1)
 		return;
diff --git a/drivers/hv/hv_balloon.c b/drivers/hv/hv_balloon.c
index a02ce43..32e3bc0 100644
--- a/drivers/hv/hv_balloon.c
+++ b/drivers/hv/hv_balloon.c
@@ -533,7 +533,6 @@ struct hv_dynmem_device {
 	 * State to synchronize hot-add.
 	 */
 	struct completion  ol_waitevent;
-	bool ha_waiting;
 	/*
 	 * This thread handles hot-add
 	 * requests from the host as well as notifying
@@ -634,10 +633,7 @@ static int hv_memory_notifier(struct notifier_block *nb, unsigned long val,
 	switch (val) {
 	case MEM_ONLINE:
 	case MEM_CANCEL_ONLINE:
-		if (dm_device.ha_waiting) {
-			dm_device.ha_waiting = false;
-			complete(&dm_device.ol_waitevent);
-		}
+		complete(&dm_device.ol_waitevent);
 		break;
 
 	case MEM_OFFLINE:
@@ -726,8 +722,7 @@ static void hv_mem_hot_add(unsigned long start, unsigned long size,
 		has->covered_end_pfn +=  processed_pfn;
 		spin_unlock_irqrestore(&dm_device.ha_lock, flags);
 
-		init_completion(&dm_device.ol_waitevent);
-		dm_device.ha_waiting = !memhp_auto_online;
+		reinit_completion(&dm_device.ol_waitevent);
 
 		nid = memory_add_physaddr_to_nid(PFN_PHYS(start_pfn));
 		ret = add_memory(nid, PFN_PHYS((start_pfn)),
@@ -753,15 +748,14 @@ static void hv_mem_hot_add(unsigned long start, unsigned long size,
 		}
 
 		/*
-		 * Wait for the memory block to be onlined when memory onlining
-		 * is done outside of kernel (memhp_auto_online). Since the hot
-		 * add has succeeded, it is ok to proceed even if the pages in
-		 * the hot added region have not been "onlined" within the
-		 * allowed time.
+		 * Wait for memory to get onlined. If the kernel onlined the
+		 * memory when adding it, this will return directly. Otherwise,
+		 * it will wait for user space to online the memory. This helps
+		 * to avoid adding memory faster than it is getting onlined. As
+		 * adding succeeded, it is ok to proceed even if the memory was
+		 * not onlined in time.
 		 */
-		if (dm_device.ha_waiting)
-			wait_for_completion_timeout(&dm_device.ol_waitevent,
-						    5*HZ);
+		wait_for_completion_timeout(&dm_device.ol_waitevent, 5 * HZ);
 		post_status(&dm_device);
 	}
 }
@@ -1706,6 +1700,7 @@ static int balloon_probe(struct hv_device *dev,
 
 #ifdef CONFIG_MEMORY_HOTPLUG
 	set_online_page_callback(&hv_online_page);
+	init_completion(&dm_device.ol_waitevent);
 	register_memory_notifier(&hv_memory_nb);
 #endif
 
diff --git a/drivers/hv/hv_debugfs.c b/drivers/hv/hv_debugfs.c
index 8a28785..ccf752b 100644
--- a/drivers/hv/hv_debugfs.c
+++ b/drivers/hv/hv_debugfs.c
@@ -11,7 +11,7 @@
 
 #include "hyperv_vmbus.h"
 
-struct dentry *hv_debug_root;
+static struct dentry *hv_debug_root;
 
 static int hv_debugfs_delay_get(void *data, u64 *val)
 {
diff --git a/drivers/hv/hyperv_vmbus.h b/drivers/hv/hyperv_vmbus.h
index f5fa3b3..70b30e2 100644
--- a/drivers/hv/hyperv_vmbus.h
+++ b/drivers/hv/hyperv_vmbus.h
@@ -292,7 +292,7 @@ struct vmbus_msginfo {
 	struct list_head msglist_entry;
 
 	/* The message itself */
-	unsigned char msg[0];
+	unsigned char msg[];
 };
 
 
diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
index 029378c..a68bce4 100644
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -31,6 +31,7 @@
 #include <linux/kdebug.h>
 #include <linux/efi.h>
 #include <linux/random.h>
+#include <linux/kernel.h>
 #include <linux/syscore_ops.h>
 #include <clocksource/hyperv_timer.h>
 #include "hyperv_vmbus.h"
@@ -48,14 +49,35 @@ static int hyperv_cpuhp_online;
 
 static void *hv_panic_page;
 
+/*
+ * Boolean to control whether to report panic messages over Hyper-V.
+ *
+ * It can be set via /proc/sys/kernel/hyperv/record_panic_msg
+ */
+static int sysctl_record_panic_msg = 1;
+
+static int hyperv_report_reg(void)
+{
+	return !sysctl_record_panic_msg || !hv_panic_page;
+}
+
 static int hyperv_panic_event(struct notifier_block *nb, unsigned long val,
 			      void *args)
 {
 	struct pt_regs *regs;
 
-	regs = current_pt_regs();
+	vmbus_initiate_unload(true);
 
-	hyperv_report_panic(regs, val);
+	/*
+	 * Hyper-V should be notified only once about a panic.  If we will be
+	 * doing hyperv_report_panic_msg() later with kmsg data, don't do
+	 * the notification here.
+	 */
+	if (ms_hyperv.misc_features & HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE
+	    && hyperv_report_reg()) {
+		regs = current_pt_regs();
+		hyperv_report_panic(regs, val, false);
+	}
 	return NOTIFY_DONE;
 }
 
@@ -65,7 +87,13 @@ static int hyperv_die_event(struct notifier_block *nb, unsigned long val,
 	struct die_args *die = (struct die_args *)args;
 	struct pt_regs *regs = die->regs;
 
-	hyperv_report_panic(regs, val);
+	/*
+	 * Hyper-V should be notified only once about a panic.  If we will be
+	 * doing hyperv_report_panic_msg() later with kmsg data, don't do
+	 * the notification here.
+	 */
+	if (hyperv_report_reg())
+		hyperv_report_panic(regs, val, true);
 	return NOTIFY_DONE;
 }
 
@@ -1253,13 +1281,6 @@ static void vmbus_isr(void)
 }
 
 /*
- * Boolean to control whether to report panic messages over Hyper-V.
- *
- * It can be set via /proc/sys/kernel/hyperv/record_panic_msg
- */
-static int sysctl_record_panic_msg = 1;
-
-/*
  * Callback from kmsg_dump. Grab as much as possible from the end of the kmsg
  * buffer and call into Hyper-V to transfer the data.
  */
@@ -1382,19 +1403,29 @@ static int vmbus_bus_init(void)
 			hv_panic_page = (void *)hv_alloc_hyperv_zeroed_page();
 			if (hv_panic_page) {
 				ret = kmsg_dump_register(&hv_kmsg_dumper);
-				if (ret)
+				if (ret) {
 					pr_err("Hyper-V: kmsg dump register "
 						"error 0x%x\n", ret);
+					hv_free_hyperv_page(
+					    (unsigned long)hv_panic_page);
+					hv_panic_page = NULL;
+				}
 			} else
 				pr_err("Hyper-V: panic message page memory "
 					"allocation failed");
 		}
 
 		register_die_notifier(&hyperv_die_block);
-		atomic_notifier_chain_register(&panic_notifier_list,
-					       &hyperv_panic_block);
 	}
 
+	/*
+	 * Always register the panic notifier because we need to unload
+	 * the VMbus channel connection to prevent any VMbus
+	 * activity after the VM panics.
+	 */
+	atomic_notifier_chain_register(&panic_notifier_list,
+			       &hyperv_panic_block);
+
 	vmbus_request_offers();
 
 	return 0;
@@ -1407,7 +1438,6 @@ static int vmbus_bus_init(void)
 	hv_remove_vmbus_irq();
 
 	bus_unregister(&hv_bus);
-	hv_free_hyperv_page((unsigned long)hv_panic_page);
 	unregister_sysctl_table(hv_ctl_table_hdr);
 	hv_ctl_table_hdr = NULL;
 	return ret;
@@ -2204,8 +2234,6 @@ static int vmbus_bus_suspend(struct device *dev)
 
 	vmbus_initiate_unload(false);
 
-	vmbus_connection.conn_state = DISCONNECTED;
-
 	/* Reset the event for the next resume. */
 	reinit_completion(&vmbus_connection.ready_for_resume_event);
 
@@ -2289,7 +2317,6 @@ static void hv_kexec_handler(void)
 {
 	hv_stimer_global_cleanup();
 	vmbus_initiate_unload(false);
-	vmbus_connection.conn_state = DISCONNECTED;
 	/* Make sure conn_state is set as hv_synic_cleanup checks for it */
 	mb();
 	cpuhp_remove_state(hyperv_cpuhp_online);
@@ -2306,7 +2333,6 @@ static void hv_crash_handler(struct pt_regs *regs)
 	 * doing the cleanup for current CPU only. This should be sufficient
 	 * for kdump.
 	 */
-	vmbus_connection.conn_state = DISCONNECTED;
 	cpu = smp_processor_id();
 	hv_stimer_cleanup(cpu);
 	hv_synic_disable_regs(cpu);
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 05a3083..4c62f90 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -412,7 +412,7 @@
 	  hard disk drives.
 
 	  This driver can also be built as a module. If so, the module
-	  will be called satatemp.
+	  will be called drivetemp.
 
 config SENSORS_DS620
 	tristate "Dallas Semiconductor DS620"
diff --git a/drivers/hwmon/dell-smm-hwmon.c b/drivers/hwmon/dell-smm-hwmon.c
index d4c8300..ab719d3 100644
--- a/drivers/hwmon/dell-smm-hwmon.c
+++ b/drivers/hwmon/dell-smm-hwmon.c
@@ -7,7 +7,7 @@
  * Hwmon integration:
  * Copyright (C) 2011  Jean Delvare <jdelvare@suse.de>
  * Copyright (C) 2013, 2014  Guenter Roeck <linux@roeck-us.net>
- * Copyright (C) 2014, 2015  Pali Rohár <pali.rohar@gmail.com>
+ * Copyright (C) 2014, 2015  Pali Rohár <pali@kernel.org>
  */
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
@@ -86,7 +86,7 @@ static unsigned int auto_fan;
 #define I8K_HWMON_HAVE_FAN3	(1 << 12)
 
 MODULE_AUTHOR("Massimo Dal Zotto (dz@debian.org)");
-MODULE_AUTHOR("Pali Rohár <pali.rohar@gmail.com>");
+MODULE_AUTHOR("Pali Rohár <pali@kernel.org>");
 MODULE_DESCRIPTION("Dell laptop SMM BIOS hwmon driver");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("i8k");
diff --git a/drivers/hwmon/drivetemp.c b/drivers/hwmon/drivetemp.c
index 370d0c7..9179460 100644
--- a/drivers/hwmon/drivetemp.c
+++ b/drivers/hwmon/drivetemp.c
@@ -264,12 +264,18 @@ static int drivetemp_get_scttemp(struct drivetemp_data *st, u32 attr, long *val)
 		return err;
 	switch (attr) {
 	case hwmon_temp_input:
+		if (!temp_is_valid(buf[SCT_STATUS_TEMP]))
+			return -ENODATA;
 		*val = temp_from_sct(buf[SCT_STATUS_TEMP]);
 		break;
 	case hwmon_temp_lowest:
+		if (!temp_is_valid(buf[SCT_STATUS_TEMP_LOWEST]))
+			return -ENODATA;
 		*val = temp_from_sct(buf[SCT_STATUS_TEMP_LOWEST]);
 		break;
 	case hwmon_temp_highest:
+		if (!temp_is_valid(buf[SCT_STATUS_TEMP_HIGHEST]))
+			return -ENODATA;
 		*val = temp_from_sct(buf[SCT_STATUS_TEMP_HIGHEST]);
 		break;
 	default:
diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c
index f2d81b0..e3f1ebe 100644
--- a/drivers/hwmon/jc42.c
+++ b/drivers/hwmon/jc42.c
@@ -506,7 +506,7 @@ static int jc42_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	}
 	data->config = config;
 
-	hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
+	hwmon_dev = devm_hwmon_device_register_with_info(dev, "jc42",
 							 data, &jc42_chip_info,
 							 NULL);
 	return PTR_ERR_OR_ZERO(hwmon_dev);
diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c
index 3f37d5d..9915578 100644
--- a/drivers/hwmon/k10temp.c
+++ b/drivers/hwmon/k10temp.c
@@ -186,7 +186,7 @@ static long get_raw_temp(struct k10temp_data *data)
 	return temp;
 }
 
-const char *k10temp_temp_label[] = {
+static const char *k10temp_temp_label[] = {
 	"Tctl",
 	"Tdie",
 	"Tccd1",
@@ -199,12 +199,12 @@ const char *k10temp_temp_label[] = {
 	"Tccd8",
 };
 
-const char *k10temp_in_label[] = {
+static const char *k10temp_in_label[] = {
 	"Vcore",
 	"Vsoc",
 };
 
-const char *k10temp_curr_label[] = {
+static const char *k10temp_curr_label[] = {
 	"Icore",
 	"Isoc",
 };
diff --git a/drivers/hwmon/pmbus/isl68137.c b/drivers/hwmon/pmbus/isl68137.c
index 4d23152..0c62271 100644
--- a/drivers/hwmon/pmbus/isl68137.c
+++ b/drivers/hwmon/pmbus/isl68137.c
@@ -21,8 +21,50 @@
 #define ISL68137_VOUT_AVS	0x30
 #define RAA_DMPVR2_READ_VMON	0xc8
 
-enum versions {
+enum chips {
 	isl68137,
+	isl68220,
+	isl68221,
+	isl68222,
+	isl68223,
+	isl68224,
+	isl68225,
+	isl68226,
+	isl68227,
+	isl68229,
+	isl68233,
+	isl68239,
+	isl69222,
+	isl69223,
+	isl69224,
+	isl69225,
+	isl69227,
+	isl69228,
+	isl69234,
+	isl69236,
+	isl69239,
+	isl69242,
+	isl69243,
+	isl69247,
+	isl69248,
+	isl69254,
+	isl69255,
+	isl69256,
+	isl69259,
+	isl69260,
+	isl69268,
+	isl69269,
+	isl69298,
+	raa228000,
+	raa228004,
+	raa228006,
+	raa228228,
+	raa229001,
+	raa229004,
+};
+
+enum variants {
+	raa_dmpvr1_2rail,
 	raa_dmpvr2_1rail,
 	raa_dmpvr2_2rail,
 	raa_dmpvr2_3rail,
@@ -186,7 +228,7 @@ static int isl68137_probe(struct i2c_client *client,
 	memcpy(info, &raa_dmpvr_info, sizeof(*info));
 
 	switch (id->driver_data) {
-	case isl68137:
+	case raa_dmpvr1_2rail:
 		info->pages = 2;
 		info->R[PSC_VOLTAGE_IN] = 3;
 		info->func[0] &= ~PMBUS_HAVE_VMON;
@@ -224,11 +266,47 @@ static int isl68137_probe(struct i2c_client *client,
 }
 
 static const struct i2c_device_id raa_dmpvr_id[] = {
-	{"isl68137", isl68137},
-	{"raa_dmpvr2_1rail", raa_dmpvr2_1rail},
-	{"raa_dmpvr2_2rail", raa_dmpvr2_2rail},
-	{"raa_dmpvr2_3rail", raa_dmpvr2_3rail},
-	{"raa_dmpvr2_hv", raa_dmpvr2_hv},
+	{"isl68137", raa_dmpvr1_2rail},
+	{"isl68220", raa_dmpvr2_2rail},
+	{"isl68221", raa_dmpvr2_3rail},
+	{"isl68222", raa_dmpvr2_2rail},
+	{"isl68223", raa_dmpvr2_2rail},
+	{"isl68224", raa_dmpvr2_3rail},
+	{"isl68225", raa_dmpvr2_2rail},
+	{"isl68226", raa_dmpvr2_3rail},
+	{"isl68227", raa_dmpvr2_1rail},
+	{"isl68229", raa_dmpvr2_3rail},
+	{"isl68233", raa_dmpvr2_2rail},
+	{"isl68239", raa_dmpvr2_3rail},
+
+	{"isl69222", raa_dmpvr2_2rail},
+	{"isl69223", raa_dmpvr2_3rail},
+	{"isl69224", raa_dmpvr2_2rail},
+	{"isl69225", raa_dmpvr2_2rail},
+	{"isl69227", raa_dmpvr2_3rail},
+	{"isl69228", raa_dmpvr2_3rail},
+	{"isl69234", raa_dmpvr2_2rail},
+	{"isl69236", raa_dmpvr2_2rail},
+	{"isl69239", raa_dmpvr2_3rail},
+	{"isl69242", raa_dmpvr2_2rail},
+	{"isl69243", raa_dmpvr2_1rail},
+	{"isl69247", raa_dmpvr2_2rail},
+	{"isl69248", raa_dmpvr2_2rail},
+	{"isl69254", raa_dmpvr2_2rail},
+	{"isl69255", raa_dmpvr2_2rail},
+	{"isl69256", raa_dmpvr2_2rail},
+	{"isl69259", raa_dmpvr2_2rail},
+	{"isl69260", raa_dmpvr2_2rail},
+	{"isl69268", raa_dmpvr2_2rail},
+	{"isl69269", raa_dmpvr2_3rail},
+	{"isl69298", raa_dmpvr2_2rail},
+
+	{"raa228000", raa_dmpvr2_hv},
+	{"raa228004", raa_dmpvr2_hv},
+	{"raa228006", raa_dmpvr2_hv},
+	{"raa228228", raa_dmpvr2_2rail},
+	{"raa229001", raa_dmpvr2_2rail},
+	{"raa229004", raa_dmpvr2_2rail},
 	{}
 };
 
diff --git a/drivers/hwspinlock/Kconfig b/drivers/hwspinlock/Kconfig
index 37740e9..826a105 100644
--- a/drivers/hwspinlock/Kconfig
+++ b/drivers/hwspinlock/Kconfig
@@ -9,7 +9,7 @@
 config HWSPINLOCK_OMAP
 	tristate "OMAP Hardware Spinlock device"
 	depends on HWSPINLOCK
-	depends on ARCH_OMAP4 || SOC_OMAP5 || SOC_DRA7XX || SOC_AM33XX || SOC_AM43XX || ARCH_K3
+	depends on ARCH_OMAP4 || SOC_OMAP5 || SOC_DRA7XX || SOC_AM33XX || SOC_AM43XX || ARCH_K3 || COMPILE_TEST
 	help
 	  Say y here to support the OMAP Hardware Spinlock device (firstly
 	  introduced in OMAP4).
@@ -19,7 +19,7 @@
 config HWSPINLOCK_QCOM
 	tristate "Qualcomm Hardware Spinlock device"
 	depends on HWSPINLOCK
-	depends on ARCH_QCOM
+	depends on ARCH_QCOM || COMPILE_TEST
 	select MFD_SYSCON
 	help
 	  Say y here to support the Qualcomm Hardware Mutex functionality, which
@@ -31,7 +31,7 @@
 config HWSPINLOCK_SIRF
 	tristate "SIRF Hardware Spinlock device"
 	depends on HWSPINLOCK
-	depends on ARCH_SIRF
+	depends on ARCH_SIRF || COMPILE_TEST
 	help
 	  Say y here to support the SIRF Hardware Spinlock device, which
 	  provides a synchronisation mechanism for the various processors
@@ -42,7 +42,7 @@
 
 config HWSPINLOCK_SPRD
 	tristate "SPRD Hardware Spinlock device"
-	depends on ARCH_SPRD
+	depends on ARCH_SPRD || COMPILE_TEST
 	depends on HWSPINLOCK
 	help
 	  Say y here to support the SPRD Hardware Spinlock device.
@@ -51,7 +51,7 @@
 
 config HWSPINLOCK_STM32
 	tristate "STM32 Hardware Spinlock device"
-	depends on MACH_STM32MP157
+	depends on MACH_STM32MP157 || COMPILE_TEST
 	depends on HWSPINLOCK
 	help
 	  Say y here to support the STM32 Hardware Spinlock device.
@@ -61,7 +61,7 @@
 config HSEM_U8500
 	tristate "STE Hardware Semaphore functionality"
 	depends on HWSPINLOCK
-	depends on ARCH_U8500
+	depends on ARCH_U8500 || COMPILE_TEST
 	help
 	  Say y here to support the STE Hardware Semaphore functionality, which
 	  provides a synchronisation mechanism for the various processor on the
diff --git a/drivers/hwspinlock/hwspinlock_internal.h b/drivers/hwspinlock/hwspinlock_internal.h
index 9eb6bd0..2989276 100644
--- a/drivers/hwspinlock/hwspinlock_internal.h
+++ b/drivers/hwspinlock/hwspinlock_internal.h
@@ -56,7 +56,7 @@ struct hwspinlock_device {
 	const struct hwspinlock_ops *ops;
 	int base_id;
 	int num_locks;
-	struct hwspinlock lock[0];
+	struct hwspinlock lock[];
 };
 
 static inline int hwlock_to_id(struct hwspinlock *hwlock)
diff --git a/drivers/hwtracing/coresight/Kconfig b/drivers/hwtracing/coresight/Kconfig
index 6ff30e2..83e841b 100644
--- a/drivers/hwtracing/coresight/Kconfig
+++ b/drivers/hwtracing/coresight/Kconfig
@@ -110,4 +110,25 @@
 	  properly, please refer Documentation/trace/coresight-cpu-debug.rst
 	  for detailed description and the example for usage.
 
+config CORESIGHT_CTI
+	bool "CoreSight Cross Trigger Interface (CTI) driver"
+	depends on ARM || ARM64
+	help
+	  This driver provides support for CoreSight CTI and CTM components.
+	  These provide hardware triggering events between CoreSight trace
+	  source and sink components. These can be used to halt trace or
+	  inject events into the trace stream. CTI also provides a software
+	  control to trigger the same halt events. This can provide fast trace
+	  halt compared to disabling sources and sinks normally in driver
+	  software.
+
+config CORESIGHT_CTI_INTEGRATION_REGS
+	bool "Access CTI CoreSight Integration Registers"
+	depends on CORESIGHT_CTI
+	help
+	  This option adds support for the CoreSight integration registers on
+	  this device. The integration registers allow the exploration of the
+	  CTI trigger connections between this and other devices.These
+	  registers are not used in normal operation and can leave devices in
+	  an inconsistent state.
 endif
diff --git a/drivers/hwtracing/coresight/Makefile b/drivers/hwtracing/coresight/Makefile
index 3c0ac42..0e3e72f 100644
--- a/drivers/hwtracing/coresight/Makefile
+++ b/drivers/hwtracing/coresight/Makefile
@@ -17,3 +17,6 @@
 obj-$(CONFIG_CORESIGHT_STM) += coresight-stm.o
 obj-$(CONFIG_CORESIGHT_CPU_DEBUG) += coresight-cpu-debug.o
 obj-$(CONFIG_CORESIGHT_CATU) += coresight-catu.o
+obj-$(CONFIG_CORESIGHT_CTI) += coresight-cti.o \
+				coresight-cti-platform.o \
+				coresight-cti-sysfs.o
diff --git a/drivers/hwtracing/coresight/coresight-cti-platform.c b/drivers/hwtracing/coresight/coresight-cti-platform.c
new file mode 100644
index 0000000..b44d831
--- /dev/null
+++ b/drivers/hwtracing/coresight/coresight-cti-platform.c
@@ -0,0 +1,485 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019, The Linaro Limited. All rights reserved.
+ */
+
+#include <dt-bindings/arm/coresight-cti-dt.h>
+#include <linux/of.h>
+
+#include "coresight-cti.h"
+
+/* Number of CTI signals in the v8 architecturally defined connection */
+#define NR_V8PE_IN_SIGS		2
+#define NR_V8PE_OUT_SIGS	3
+#define NR_V8ETM_INOUT_SIGS	4
+
+/* CTI device tree trigger connection node keyword */
+#define CTI_DT_CONNS		"trig-conns"
+
+/* CTI device tree connection property keywords */
+#define CTI_DT_V8ARCH_COMPAT	"arm,coresight-cti-v8-arch"
+#define CTI_DT_CSDEV_ASSOC	"arm,cs-dev-assoc"
+#define CTI_DT_TRIGIN_SIGS	"arm,trig-in-sigs"
+#define CTI_DT_TRIGOUT_SIGS	"arm,trig-out-sigs"
+#define CTI_DT_TRIGIN_TYPES	"arm,trig-in-types"
+#define CTI_DT_TRIGOUT_TYPES	"arm,trig-out-types"
+#define CTI_DT_FILTER_OUT_SIGS	"arm,trig-filters"
+#define CTI_DT_CONN_NAME	"arm,trig-conn-name"
+#define CTI_DT_CTM_ID		"arm,cti-ctm-id"
+
+#ifdef CONFIG_OF
+/*
+ * CTI can be bound to a CPU, or a system device.
+ * CPU can be declared at the device top level or in a connections node
+ * so need to check relative to node not device.
+ */
+static int of_cti_get_cpu_at_node(const struct device_node *node)
+{
+	int cpu;
+	struct device_node *dn;
+
+	if (node == NULL)
+		return -1;
+
+	dn = of_parse_phandle(node, "cpu", 0);
+	/* CTI affinity defaults to no cpu */
+	if (!dn)
+		return -1;
+	cpu = of_cpu_node_to_id(dn);
+	of_node_put(dn);
+
+	/* No Affinity  if no cpu nodes are found */
+	return (cpu < 0) ? -1 : cpu;
+}
+
+#else
+static int of_cti_get_cpu_at_node(const struct device_node *node)
+{
+	return -1;
+}
+
+#endif
+
+/*
+ * CTI can be bound to a CPU, or a system device.
+ * CPU can be declared at the device top level or in a connections node
+ * so need to check relative to node not device.
+ */
+static int cti_plat_get_cpu_at_node(struct fwnode_handle *fwnode)
+{
+	if (is_of_node(fwnode))
+		return of_cti_get_cpu_at_node(to_of_node(fwnode));
+	return -1;
+}
+
+const char *cti_plat_get_node_name(struct fwnode_handle *fwnode)
+{
+	if (is_of_node(fwnode))
+		return of_node_full_name(to_of_node(fwnode));
+	return "unknown";
+}
+
+/*
+ * Extract a name from the fwnode.
+ * If the device associated with the node is a coresight_device, then return
+ * that name and the coresight_device pointer, otherwise return the node name.
+ */
+static const char *
+cti_plat_get_csdev_or_node_name(struct fwnode_handle *fwnode,
+				struct coresight_device **csdev)
+{
+	const char *name = NULL;
+	*csdev = coresight_find_csdev_by_fwnode(fwnode);
+	if (*csdev)
+		name = dev_name(&(*csdev)->dev);
+	else
+		name = cti_plat_get_node_name(fwnode);
+	return name;
+}
+
+static bool cti_plat_node_name_eq(struct fwnode_handle *fwnode,
+				  const char *name)
+{
+	if (is_of_node(fwnode))
+		return of_node_name_eq(to_of_node(fwnode), name);
+	return false;
+}
+
+static int cti_plat_create_v8_etm_connection(struct device *dev,
+					     struct cti_drvdata *drvdata)
+{
+	int ret = -ENOMEM, i;
+	struct fwnode_handle *root_fwnode, *cs_fwnode;
+	const char *assoc_name = NULL;
+	struct coresight_device *csdev;
+	struct cti_trig_con *tc = NULL;
+
+	root_fwnode = dev_fwnode(dev);
+	if (IS_ERR_OR_NULL(root_fwnode))
+		return -EINVAL;
+
+	/* Can optionally have an etm node - return if not  */
+	cs_fwnode = fwnode_find_reference(root_fwnode, CTI_DT_CSDEV_ASSOC, 0);
+	if (IS_ERR_OR_NULL(cs_fwnode))
+		return 0;
+
+	/* allocate memory */
+	tc = cti_allocate_trig_con(dev, NR_V8ETM_INOUT_SIGS,
+				   NR_V8ETM_INOUT_SIGS);
+	if (!tc)
+		goto create_v8_etm_out;
+
+	/* build connection data */
+	tc->con_in->used_mask = 0xF0; /* sigs <4,5,6,7> */
+	tc->con_out->used_mask = 0xF0; /* sigs <4,5,6,7> */
+
+	/*
+	 * The EXTOUT type signals from the ETM are connected to a set of input
+	 * triggers on the CTI, the EXTIN being connected to output triggers.
+	 */
+	for (i = 0; i < NR_V8ETM_INOUT_SIGS; i++) {
+		tc->con_in->sig_types[i] = ETM_EXTOUT;
+		tc->con_out->sig_types[i] = ETM_EXTIN;
+	}
+
+	/*
+	 * We look to see if the ETM coresight device associated with this
+	 * handle has been registered with the system - i.e. probed before
+	 * this CTI. If so csdev will be non NULL and we can use the device
+	 * name and pass the csdev to the connection entry function where
+	 * the association will be recorded.
+	 * If not, then simply record the name in the connection data, the
+	 * probing of the ETM will call into the CTI driver API to update the
+	 * association then.
+	 */
+	assoc_name = cti_plat_get_csdev_or_node_name(cs_fwnode, &csdev);
+	ret = cti_add_connection_entry(dev, drvdata, tc, csdev, assoc_name);
+
+create_v8_etm_out:
+	fwnode_handle_put(cs_fwnode);
+	return ret;
+}
+
+/*
+ * Create an architecturally defined v8 connection
+ * must have a cpu, can have an ETM.
+ */
+static int cti_plat_create_v8_connections(struct device *dev,
+					  struct cti_drvdata *drvdata)
+{
+	struct cti_device *cti_dev = &drvdata->ctidev;
+	struct cti_trig_con *tc = NULL;
+	int cpuid = 0;
+	char cpu_name_str[16];
+	int ret = -ENOMEM;
+
+	/* Must have a cpu node */
+	cpuid = cti_plat_get_cpu_at_node(dev_fwnode(dev));
+	if (cpuid < 0) {
+		dev_warn(dev,
+			 "ARM v8 architectural CTI connection: missing cpu\n");
+		return -EINVAL;
+	}
+	cti_dev->cpu = cpuid;
+
+	/* Allocate the v8 cpu connection memory */
+	tc = cti_allocate_trig_con(dev, NR_V8PE_IN_SIGS, NR_V8PE_OUT_SIGS);
+	if (!tc)
+		goto of_create_v8_out;
+
+	/* Set the v8 PE CTI connection data */
+	tc->con_in->used_mask = 0x3; /* sigs <0 1> */
+	tc->con_in->sig_types[0] = PE_DBGTRIGGER;
+	tc->con_in->sig_types[1] = PE_PMUIRQ;
+	tc->con_out->used_mask = 0x7; /* sigs <0 1 2 > */
+	tc->con_out->sig_types[0] = PE_EDBGREQ;
+	tc->con_out->sig_types[1] = PE_DBGRESTART;
+	tc->con_out->sig_types[2] = PE_CTIIRQ;
+	scnprintf(cpu_name_str, sizeof(cpu_name_str), "cpu%d", cpuid);
+
+	ret = cti_add_connection_entry(dev, drvdata, tc, NULL, cpu_name_str);
+	if (ret)
+		goto of_create_v8_out;
+
+	/* Create the v8 ETM associated connection */
+	ret = cti_plat_create_v8_etm_connection(dev, drvdata);
+	if (ret)
+		goto of_create_v8_out;
+
+	/* filter pe_edbgreq - PE trigout sig <0> */
+	drvdata->config.trig_out_filter |= 0x1;
+
+of_create_v8_out:
+	return ret;
+}
+
+static int cti_plat_check_v8_arch_compatible(struct device *dev)
+{
+	struct fwnode_handle *fwnode = dev_fwnode(dev);
+
+	if (is_of_node(fwnode))
+		return of_device_is_compatible(to_of_node(fwnode),
+					       CTI_DT_V8ARCH_COMPAT);
+	return 0;
+}
+
+static int cti_plat_count_sig_elements(const struct fwnode_handle *fwnode,
+				       const char *name)
+{
+	int nr_elem = fwnode_property_count_u32(fwnode, name);
+
+	return (nr_elem < 0 ? 0 : nr_elem);
+}
+
+static int cti_plat_read_trig_group(struct cti_trig_grp *tgrp,
+				    const struct fwnode_handle *fwnode,
+				    const char *grp_name)
+{
+	int idx, err = 0;
+	u32 *values;
+
+	if (!tgrp->nr_sigs)
+		return 0;
+
+	values = kcalloc(tgrp->nr_sigs, sizeof(u32), GFP_KERNEL);
+	if (!values)
+		return -ENOMEM;
+
+	err = fwnode_property_read_u32_array(fwnode, grp_name,
+					     values, tgrp->nr_sigs);
+
+	if (!err) {
+		/* set the signal usage mask */
+		for (idx = 0; idx < tgrp->nr_sigs; idx++)
+			tgrp->used_mask |= BIT(values[idx]);
+	}
+
+	kfree(values);
+	return err;
+}
+
+static int cti_plat_read_trig_types(struct cti_trig_grp *tgrp,
+				    const struct fwnode_handle *fwnode,
+				    const char *type_name)
+{
+	int items, err = 0, nr_sigs;
+	u32 *values = NULL, i;
+
+	/* allocate an array according to number of signals in connection */
+	nr_sigs = tgrp->nr_sigs;
+	if (!nr_sigs)
+		return 0;
+
+	/* see if any types have been included in the device description */
+	items = cti_plat_count_sig_elements(fwnode, type_name);
+	if (items > nr_sigs)
+		return -EINVAL;
+
+	/* need an array to store the values iff there are any */
+	if (items) {
+		values = kcalloc(items, sizeof(u32), GFP_KERNEL);
+		if (!values)
+			return -ENOMEM;
+
+		err = fwnode_property_read_u32_array(fwnode, type_name,
+						     values, items);
+		if (err)
+			goto read_trig_types_out;
+	}
+
+	/*
+	 * Match type id to signal index, 1st type to 1st index etc.
+	 * If fewer types than signals default remainder to GEN_IO.
+	 */
+	for (i = 0; i < nr_sigs; i++) {
+		if (i < items) {
+			tgrp->sig_types[i] =
+				values[i] < CTI_TRIG_MAX ? values[i] : GEN_IO;
+		} else {
+			tgrp->sig_types[i] = GEN_IO;
+		}
+	}
+
+read_trig_types_out:
+	kfree(values);
+	return err;
+}
+
+static int cti_plat_process_filter_sigs(struct cti_drvdata *drvdata,
+					const struct fwnode_handle *fwnode)
+{
+	struct cti_trig_grp *tg = NULL;
+	int err = 0, nr_filter_sigs;
+
+	nr_filter_sigs = cti_plat_count_sig_elements(fwnode,
+						     CTI_DT_FILTER_OUT_SIGS);
+	if (nr_filter_sigs == 0)
+		return 0;
+
+	if (nr_filter_sigs > drvdata->config.nr_trig_max)
+		return -EINVAL;
+
+	tg = kzalloc(sizeof(*tg), GFP_KERNEL);
+	if (!tg)
+		return -ENOMEM;
+
+	err = cti_plat_read_trig_group(tg, fwnode, CTI_DT_FILTER_OUT_SIGS);
+	if (!err)
+		drvdata->config.trig_out_filter |= tg->used_mask;
+
+	kfree(tg);
+	return err;
+}
+
+static int cti_plat_create_connection(struct device *dev,
+				      struct cti_drvdata *drvdata,
+				      struct fwnode_handle *fwnode)
+{
+	struct cti_trig_con *tc = NULL;
+	int cpuid = -1, err = 0;
+	struct fwnode_handle *cs_fwnode = NULL;
+	struct coresight_device *csdev = NULL;
+	const char *assoc_name = "unknown";
+	char cpu_name_str[16];
+	int nr_sigs_in, nr_sigs_out;
+
+	/* look to see how many in and out signals we have */
+	nr_sigs_in = cti_plat_count_sig_elements(fwnode, CTI_DT_TRIGIN_SIGS);
+	nr_sigs_out = cti_plat_count_sig_elements(fwnode, CTI_DT_TRIGOUT_SIGS);
+
+	if ((nr_sigs_in > drvdata->config.nr_trig_max) ||
+	    (nr_sigs_out > drvdata->config.nr_trig_max))
+		return -EINVAL;
+
+	tc = cti_allocate_trig_con(dev, nr_sigs_in, nr_sigs_out);
+	if (!tc)
+		return -ENOMEM;
+
+	/* look for the signals properties. */
+	err = cti_plat_read_trig_group(tc->con_in, fwnode,
+				       CTI_DT_TRIGIN_SIGS);
+	if (err)
+		goto create_con_err;
+
+	err = cti_plat_read_trig_types(tc->con_in, fwnode,
+				       CTI_DT_TRIGIN_TYPES);
+	if (err)
+		goto create_con_err;
+
+	err = cti_plat_read_trig_group(tc->con_out, fwnode,
+				       CTI_DT_TRIGOUT_SIGS);
+	if (err)
+		goto create_con_err;
+
+	err = cti_plat_read_trig_types(tc->con_out, fwnode,
+				       CTI_DT_TRIGOUT_TYPES);
+	if (err)
+		goto create_con_err;
+
+	err = cti_plat_process_filter_sigs(drvdata, fwnode);
+	if (err)
+		goto create_con_err;
+
+	/* read the connection name if set - may be overridden by later */
+	fwnode_property_read_string(fwnode, CTI_DT_CONN_NAME, &assoc_name);
+
+	/* associated cpu ? */
+	cpuid = cti_plat_get_cpu_at_node(fwnode);
+	if (cpuid >= 0) {
+		drvdata->ctidev.cpu = cpuid;
+		scnprintf(cpu_name_str, sizeof(cpu_name_str), "cpu%d", cpuid);
+		assoc_name = cpu_name_str;
+	} else {
+		/* associated device ? */
+		cs_fwnode = fwnode_find_reference(fwnode,
+						  CTI_DT_CSDEV_ASSOC, 0);
+		if (!IS_ERR_OR_NULL(cs_fwnode)) {
+			assoc_name = cti_plat_get_csdev_or_node_name(cs_fwnode,
+								     &csdev);
+			fwnode_handle_put(cs_fwnode);
+		}
+	}
+	/* set up a connection */
+	err = cti_add_connection_entry(dev, drvdata, tc, csdev, assoc_name);
+
+create_con_err:
+	return err;
+}
+
+static int cti_plat_create_impdef_connections(struct device *dev,
+					      struct cti_drvdata *drvdata)
+{
+	int rc = 0;
+	struct fwnode_handle *fwnode = dev_fwnode(dev);
+	struct fwnode_handle *child = NULL;
+
+	if (IS_ERR_OR_NULL(fwnode))
+		return -EINVAL;
+
+	fwnode_for_each_child_node(fwnode, child) {
+		if (cti_plat_node_name_eq(child, CTI_DT_CONNS))
+			rc = cti_plat_create_connection(dev, drvdata,
+							child);
+		if (rc != 0)
+			break;
+	}
+	fwnode_handle_put(child);
+
+	return rc;
+}
+
+/* get the hardware configuration & connection data. */
+int cti_plat_get_hw_data(struct device *dev,
+			 struct cti_drvdata *drvdata)
+{
+	int rc = 0;
+	struct cti_device *cti_dev = &drvdata->ctidev;
+
+	/* get any CTM ID - defaults to 0 */
+	device_property_read_u32(dev, CTI_DT_CTM_ID, &cti_dev->ctm_id);
+
+	/* check for a v8 architectural CTI device */
+	if (cti_plat_check_v8_arch_compatible(dev))
+		rc = cti_plat_create_v8_connections(dev, drvdata);
+	else
+		rc = cti_plat_create_impdef_connections(dev, drvdata);
+	if (rc)
+		return rc;
+
+	/* if no connections, just add a single default based on max IN-OUT */
+	if (cti_dev->nr_trig_con == 0)
+		rc = cti_add_default_connection(dev, drvdata);
+	return rc;
+}
+
+struct coresight_platform_data *
+coresight_cti_get_platform_data(struct device *dev)
+{
+	int ret = -ENOENT;
+	struct coresight_platform_data *pdata = NULL;
+	struct fwnode_handle *fwnode = dev_fwnode(dev);
+	struct cti_drvdata *drvdata = dev_get_drvdata(dev);
+
+	if (IS_ERR_OR_NULL(fwnode))
+		goto error;
+
+	/*
+	 * Alloc platform data but leave it zero init. CTI does not use the
+	 * same connection infrastructuree as trace path components but an
+	 * empty struct enables us to use the standard coresight component
+	 * registration code.
+	 */
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata) {
+		ret = -ENOMEM;
+		goto error;
+	}
+
+	/* get some CTI specifics */
+	ret = cti_plat_get_hw_data(dev, drvdata);
+
+	if (!ret)
+		return pdata;
+error:
+	return ERR_PTR(ret);
+}
diff --git a/drivers/hwtracing/coresight/coresight-cti-sysfs.c b/drivers/hwtracing/coresight/coresight-cti-sysfs.c
new file mode 100644
index 0000000..1f8fb7c
--- /dev/null
+++ b/drivers/hwtracing/coresight/coresight-cti-sysfs.c
@@ -0,0 +1,1206 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 Linaro Limited, All rights reserved.
+ * Author: Mike Leach <mike.leach@linaro.org>
+ */
+
+#include <linux/coresight.h>
+
+#include "coresight-cti.h"
+
+/*
+ * Declare the number of static declared attribute groups
+ * Value includes groups + NULL value at end of table.
+ */
+#define CORESIGHT_CTI_STATIC_GROUPS_MAX 5
+
+/*
+ * List of trigger signal type names. Match the constants declared in
+ * include\dt-bindings\arm\coresight-cti-dt.h
+ */
+static const char * const sig_type_names[] = {
+	"genio",	/* GEN_IO */
+	"intreq",	/* GEN_INTREQ */
+	"intack",	/* GEN_INTACK */
+	"haltreq",	/* GEN_HALTREQ */
+	"restartreq",	/* GEN_RESTARTREQ */
+	"pe_edbgreq",	/* PE_EDBGREQ */
+	"pe_dbgrestart",/* PE_DBGRESTART */
+	"pe_ctiirq",	/* PE_CTIIRQ */
+	"pe_pmuirq",	/* PE_PMUIRQ */
+	"pe_dbgtrigger",/* PE_DBGTRIGGER */
+	"etm_extout",	/* ETM_EXTOUT */
+	"etm_extin",	/* ETM_EXTIN */
+	"snk_full",	/* SNK_FULL */
+	"snk_acqcomp",	/* SNK_ACQCOMP */
+	"snk_flushcomp",/* SNK_FLUSHCOMP */
+	"snk_flushin",	/* SNK_FLUSHIN */
+	"snk_trigin",	/* SNK_TRIGIN */
+	"stm_asyncout",	/* STM_ASYNCOUT */
+	"stm_tout_spte",/* STM_TOUT_SPTE */
+	"stm_tout_sw",	/* STM_TOUT_SW */
+	"stm_tout_hete",/* STM_TOUT_HETE */
+	"stm_hwevent",	/* STM_HWEVENT */
+	"ela_tstart",	/* ELA_TSTART */
+	"ela_tstop",	/* ELA_TSTOP */
+	"ela_dbgreq",	/* ELA_DBGREQ */
+};
+
+/* Show function pointer used in the connections dynamic declared attributes*/
+typedef ssize_t (*p_show_fn)(struct device *dev, struct device_attribute *attr,
+			     char *buf);
+
+/* Connection attribute types */
+enum cti_conn_attr_type {
+	CTI_CON_ATTR_NAME,
+	CTI_CON_ATTR_TRIGIN_SIG,
+	CTI_CON_ATTR_TRIGOUT_SIG,
+	CTI_CON_ATTR_TRIGIN_TYPES,
+	CTI_CON_ATTR_TRIGOUT_TYPES,
+	CTI_CON_ATTR_MAX,
+};
+
+/* Names for the connection attributes */
+static const char * const con_attr_names[CTI_CON_ATTR_MAX] = {
+	"name",
+	"in_signals",
+	"out_signals",
+	"in_types",
+	"out_types",
+};
+
+/* basic attributes */
+static ssize_t enable_show(struct device *dev,
+			   struct device_attribute *attr,
+			   char *buf)
+{
+	int enable_req;
+	bool enabled, powered;
+	struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent);
+
+	enable_req = atomic_read(&drvdata->config.enable_req_count);
+	spin_lock(&drvdata->spinlock);
+	powered = drvdata->config.hw_powered;
+	enabled = drvdata->config.hw_enabled;
+	spin_unlock(&drvdata->spinlock);
+
+	if (powered)
+		return sprintf(buf, "%d\n", enabled);
+	else
+		return sprintf(buf, "%d\n", !!enable_req);
+}
+
+static ssize_t enable_store(struct device *dev,
+			    struct device_attribute *attr,
+			    const char *buf, size_t size)
+{
+	int ret = 0;
+	unsigned long val;
+	struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent);
+
+	ret = kstrtoul(buf, 0, &val);
+	if (ret)
+		return ret;
+
+	if (val)
+		ret = cti_enable(drvdata->csdev);
+	else
+		ret = cti_disable(drvdata->csdev);
+	if (ret)
+		return ret;
+	return size;
+}
+static DEVICE_ATTR_RW(enable);
+
+static ssize_t powered_show(struct device *dev,
+			    struct device_attribute *attr,
+			    char *buf)
+{
+	bool powered;
+	struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent);
+
+	spin_lock(&drvdata->spinlock);
+	powered = drvdata->config.hw_powered;
+	spin_unlock(&drvdata->spinlock);
+
+	return sprintf(buf, "%d\n", powered);
+}
+static DEVICE_ATTR_RO(powered);
+
+static ssize_t ctmid_show(struct device *dev,
+			  struct device_attribute *attr, char *buf)
+{
+	struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent);
+
+	return sprintf(buf, "%d\n", drvdata->ctidev.ctm_id);
+}
+static DEVICE_ATTR_RO(ctmid);
+
+static ssize_t nr_trigger_cons_show(struct device *dev,
+				    struct device_attribute *attr,
+				    char *buf)
+{
+	struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent);
+
+	return sprintf(buf, "%d\n", drvdata->ctidev.nr_trig_con);
+}
+static DEVICE_ATTR_RO(nr_trigger_cons);
+
+/* attribute and group sysfs tables. */
+static struct attribute *coresight_cti_attrs[] = {
+	&dev_attr_enable.attr,
+	&dev_attr_powered.attr,
+	&dev_attr_ctmid.attr,
+	&dev_attr_nr_trigger_cons.attr,
+	NULL,
+};
+
+/* register based attributes */
+
+/* macro to access RO registers with power check only (no enable check). */
+#define coresight_cti_reg(name, offset)			\
+static ssize_t name##_show(struct device *dev,				\
+			   struct device_attribute *attr, char *buf)	\
+{									\
+	struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent);	\
+	u32 val = 0;							\
+	pm_runtime_get_sync(dev->parent);				\
+	spin_lock(&drvdata->spinlock);					\
+	if (drvdata->config.hw_powered)					\
+		val = readl_relaxed(drvdata->base + offset);		\
+	spin_unlock(&drvdata->spinlock);				\
+	pm_runtime_put_sync(dev->parent);				\
+	return sprintf(buf, "0x%x\n", val);				\
+}									\
+static DEVICE_ATTR_RO(name)
+
+/* coresight management registers */
+coresight_cti_reg(devaff0, CTIDEVAFF0);
+coresight_cti_reg(devaff1, CTIDEVAFF1);
+coresight_cti_reg(authstatus, CORESIGHT_AUTHSTATUS);
+coresight_cti_reg(devarch, CORESIGHT_DEVARCH);
+coresight_cti_reg(devid, CORESIGHT_DEVID);
+coresight_cti_reg(devtype, CORESIGHT_DEVTYPE);
+coresight_cti_reg(pidr0, CORESIGHT_PERIPHIDR0);
+coresight_cti_reg(pidr1, CORESIGHT_PERIPHIDR1);
+coresight_cti_reg(pidr2, CORESIGHT_PERIPHIDR2);
+coresight_cti_reg(pidr3, CORESIGHT_PERIPHIDR3);
+coresight_cti_reg(pidr4, CORESIGHT_PERIPHIDR4);
+
+static struct attribute *coresight_cti_mgmt_attrs[] = {
+	&dev_attr_devaff0.attr,
+	&dev_attr_devaff1.attr,
+	&dev_attr_authstatus.attr,
+	&dev_attr_devarch.attr,
+	&dev_attr_devid.attr,
+	&dev_attr_devtype.attr,
+	&dev_attr_pidr0.attr,
+	&dev_attr_pidr1.attr,
+	&dev_attr_pidr2.attr,
+	&dev_attr_pidr3.attr,
+	&dev_attr_pidr4.attr,
+	NULL,
+};
+
+/* CTI low level programming registers */
+
+/*
+ * Show a simple 32 bit value if enabled and powered.
+ * If inaccessible & pcached_val not NULL then show cached value.
+ */
+static ssize_t cti_reg32_show(struct device *dev, char *buf,
+			      u32 *pcached_val, int reg_offset)
+{
+	u32 val = 0;
+	struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent);
+	struct cti_config *config = &drvdata->config;
+
+	spin_lock(&drvdata->spinlock);
+	if ((reg_offset >= 0) && cti_active(config)) {
+		CS_UNLOCK(drvdata->base);
+		val = readl_relaxed(drvdata->base + reg_offset);
+		if (pcached_val)
+			*pcached_val = val;
+		CS_LOCK(drvdata->base);
+	} else if (pcached_val) {
+		val = *pcached_val;
+	}
+	spin_unlock(&drvdata->spinlock);
+	return sprintf(buf, "%#x\n", val);
+}
+
+/*
+ * Store a simple 32 bit value.
+ * If pcached_val not NULL, then copy to here too,
+ * if reg_offset >= 0 then write through if enabled.
+ */
+static ssize_t cti_reg32_store(struct device *dev, const char *buf,
+			       size_t size, u32 *pcached_val, int reg_offset)
+{
+	unsigned long val;
+	struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent);
+	struct cti_config *config = &drvdata->config;
+
+	if (kstrtoul(buf, 0, &val))
+		return -EINVAL;
+
+	spin_lock(&drvdata->spinlock);
+	/* local store */
+	if (pcached_val)
+		*pcached_val = (u32)val;
+
+	/* write through if offset and enabled */
+	if ((reg_offset >= 0) && cti_active(config))
+		cti_write_single_reg(drvdata, reg_offset, val);
+	spin_unlock(&drvdata->spinlock);
+	return size;
+}
+
+/* Standard macro for simple rw cti config registers */
+#define cti_config_reg32_rw(name, cfgname, offset)			\
+static ssize_t name##_show(struct device *dev,				\
+			   struct device_attribute *attr,		\
+			   char *buf)					\
+{									\
+	struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent);	\
+	return cti_reg32_show(dev, buf,					\
+			      &drvdata->config.cfgname, offset);	\
+}									\
+									\
+static ssize_t name##_store(struct device *dev,				\
+			    struct device_attribute *attr,		\
+			    const char *buf, size_t size)		\
+{									\
+	struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent);	\
+	return cti_reg32_store(dev, buf, size,				\
+			       &drvdata->config.cfgname, offset);	\
+}									\
+static DEVICE_ATTR_RW(name)
+
+static ssize_t inout_sel_show(struct device *dev,
+			      struct device_attribute *attr,
+			      char *buf)
+{
+	u32 val;
+	struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent);
+
+	val = (u32)drvdata->config.ctiinout_sel;
+	return sprintf(buf, "%d\n", val);
+}
+
+static ssize_t inout_sel_store(struct device *dev,
+			       struct device_attribute *attr,
+			       const char *buf, size_t size)
+{
+	unsigned long val;
+	struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent);
+
+	if (kstrtoul(buf, 0, &val))
+		return -EINVAL;
+	if (val > (CTIINOUTEN_MAX - 1))
+		return -EINVAL;
+
+	spin_lock(&drvdata->spinlock);
+	drvdata->config.ctiinout_sel = val;
+	spin_unlock(&drvdata->spinlock);
+	return size;
+}
+static DEVICE_ATTR_RW(inout_sel);
+
+static ssize_t inen_show(struct device *dev,
+			 struct device_attribute *attr,
+			 char *buf)
+{
+	unsigned long val;
+	int index;
+	struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent);
+
+	spin_lock(&drvdata->spinlock);
+	index = drvdata->config.ctiinout_sel;
+	val = drvdata->config.ctiinen[index];
+	spin_unlock(&drvdata->spinlock);
+	return sprintf(buf, "%#lx\n", val);
+}
+
+static ssize_t inen_store(struct device *dev,
+			  struct device_attribute *attr,
+			  const char *buf, size_t size)
+{
+	unsigned long val;
+	int index;
+	struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent);
+	struct cti_config *config = &drvdata->config;
+
+	if (kstrtoul(buf, 0, &val))
+		return -EINVAL;
+
+	spin_lock(&drvdata->spinlock);
+	index = config->ctiinout_sel;
+	config->ctiinen[index] = val;
+
+	/* write through if enabled */
+	if (cti_active(config))
+		cti_write_single_reg(drvdata, CTIINEN(index), val);
+	spin_unlock(&drvdata->spinlock);
+	return size;
+}
+static DEVICE_ATTR_RW(inen);
+
+static ssize_t outen_show(struct device *dev,
+			  struct device_attribute *attr,
+			  char *buf)
+{
+	unsigned long val;
+	int index;
+	struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent);
+
+	spin_lock(&drvdata->spinlock);
+	index = drvdata->config.ctiinout_sel;
+	val = drvdata->config.ctiouten[index];
+	spin_unlock(&drvdata->spinlock);
+	return sprintf(buf, "%#lx\n", val);
+}
+
+static ssize_t outen_store(struct device *dev,
+			   struct device_attribute *attr,
+			   const char *buf, size_t size)
+{
+	unsigned long val;
+	int index;
+	struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent);
+	struct cti_config *config = &drvdata->config;
+
+	if (kstrtoul(buf, 0, &val))
+		return -EINVAL;
+
+	spin_lock(&drvdata->spinlock);
+	index = config->ctiinout_sel;
+	config->ctiouten[index] = val;
+
+	/* write through if enabled */
+	if (cti_active(config))
+		cti_write_single_reg(drvdata, CTIOUTEN(index), val);
+	spin_unlock(&drvdata->spinlock);
+	return size;
+}
+static DEVICE_ATTR_RW(outen);
+
+static ssize_t intack_store(struct device *dev,
+			    struct device_attribute *attr,
+			    const char *buf, size_t size)
+{
+	unsigned long val;
+
+	if (kstrtoul(buf, 0, &val))
+		return -EINVAL;
+
+	cti_write_intack(dev, val);
+	return size;
+}
+static DEVICE_ATTR_WO(intack);
+
+cti_config_reg32_rw(gate, ctigate, CTIGATE);
+cti_config_reg32_rw(asicctl, asicctl, ASICCTL);
+cti_config_reg32_rw(appset, ctiappset, CTIAPPSET);
+
+static ssize_t appclear_store(struct device *dev,
+			      struct device_attribute *attr,
+			      const char *buf, size_t size)
+{
+	unsigned long val;
+	struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent);
+	struct cti_config *config = &drvdata->config;
+
+	if (kstrtoul(buf, 0, &val))
+		return -EINVAL;
+
+	spin_lock(&drvdata->spinlock);
+
+	/* a 1'b1 in appclr clears down the same bit in appset*/
+	config->ctiappset &= ~val;
+
+	/* write through if enabled */
+	if (cti_active(config))
+		cti_write_single_reg(drvdata, CTIAPPCLEAR, val);
+	spin_unlock(&drvdata->spinlock);
+	return size;
+}
+static DEVICE_ATTR_WO(appclear);
+
+static ssize_t apppulse_store(struct device *dev,
+			      struct device_attribute *attr,
+			      const char *buf, size_t size)
+{
+	unsigned long val;
+	struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent);
+	struct cti_config *config = &drvdata->config;
+
+	if (kstrtoul(buf, 0, &val))
+		return -EINVAL;
+
+	spin_lock(&drvdata->spinlock);
+
+	/* write through if enabled */
+	if (cti_active(config))
+		cti_write_single_reg(drvdata, CTIAPPPULSE, val);
+	spin_unlock(&drvdata->spinlock);
+	return size;
+}
+static DEVICE_ATTR_WO(apppulse);
+
+coresight_cti_reg(triginstatus, CTITRIGINSTATUS);
+coresight_cti_reg(trigoutstatus, CTITRIGOUTSTATUS);
+coresight_cti_reg(chinstatus, CTICHINSTATUS);
+coresight_cti_reg(choutstatus, CTICHOUTSTATUS);
+
+/*
+ * Define CONFIG_CORESIGHT_CTI_INTEGRATION_REGS to enable the access to the
+ * integration control registers. Normally only used to investigate connection
+ * data.
+ */
+#ifdef CONFIG_CORESIGHT_CTI_INTEGRATION_REGS
+
+/* macro to access RW registers with power check only (no enable check). */
+#define coresight_cti_reg_rw(name, offset)				\
+static ssize_t name##_show(struct device *dev,				\
+			   struct device_attribute *attr, char *buf)	\
+{									\
+	struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent);	\
+	u32 val = 0;							\
+	pm_runtime_get_sync(dev->parent);				\
+	spin_lock(&drvdata->spinlock);					\
+	if (drvdata->config.hw_powered)					\
+		val = readl_relaxed(drvdata->base + offset);		\
+	spin_unlock(&drvdata->spinlock);				\
+	pm_runtime_put_sync(dev->parent);				\
+	return sprintf(buf, "0x%x\n", val);				\
+}									\
+									\
+static ssize_t name##_store(struct device *dev,				\
+			    struct device_attribute *attr,		\
+			    const char *buf, size_t size)		\
+{									\
+	struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent);	\
+	unsigned long val = 0;						\
+	if (kstrtoul(buf, 0, &val))					\
+		return -EINVAL;						\
+									\
+	pm_runtime_get_sync(dev->parent);				\
+	spin_lock(&drvdata->spinlock);					\
+	if (drvdata->config.hw_powered)					\
+		cti_write_single_reg(drvdata, offset, val);		\
+	spin_unlock(&drvdata->spinlock);				\
+	pm_runtime_put_sync(dev->parent);				\
+	return size;							\
+}									\
+static DEVICE_ATTR_RW(name)
+
+/* macro to access WO registers with power check only (no enable check). */
+#define coresight_cti_reg_wo(name, offset)				\
+static ssize_t name##_store(struct device *dev,				\
+			    struct device_attribute *attr,		\
+			    const char *buf, size_t size)		\
+{									\
+	struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent);	\
+	unsigned long val = 0;						\
+	if (kstrtoul(buf, 0, &val))					\
+		return -EINVAL;						\
+									\
+	pm_runtime_get_sync(dev->parent);				\
+	spin_lock(&drvdata->spinlock);					\
+	if (drvdata->config.hw_powered)					\
+		cti_write_single_reg(drvdata, offset, val);		\
+	spin_unlock(&drvdata->spinlock);				\
+	pm_runtime_put_sync(dev->parent);				\
+	return size;							\
+}									\
+static DEVICE_ATTR_WO(name)
+
+coresight_cti_reg_rw(itchout, ITCHOUT);
+coresight_cti_reg_rw(ittrigout, ITTRIGOUT);
+coresight_cti_reg_rw(itctrl, CORESIGHT_ITCTRL);
+coresight_cti_reg_wo(itchinack, ITCHINACK);
+coresight_cti_reg_wo(ittriginack, ITTRIGINACK);
+coresight_cti_reg(ittrigin, ITTRIGIN);
+coresight_cti_reg(itchin, ITCHIN);
+coresight_cti_reg(itchoutack, ITCHOUTACK);
+coresight_cti_reg(ittrigoutack, ITTRIGOUTACK);
+
+#endif /* CORESIGHT_CTI_INTEGRATION_REGS */
+
+static struct attribute *coresight_cti_regs_attrs[] = {
+	&dev_attr_inout_sel.attr,
+	&dev_attr_inen.attr,
+	&dev_attr_outen.attr,
+	&dev_attr_gate.attr,
+	&dev_attr_asicctl.attr,
+	&dev_attr_intack.attr,
+	&dev_attr_appset.attr,
+	&dev_attr_appclear.attr,
+	&dev_attr_apppulse.attr,
+	&dev_attr_triginstatus.attr,
+	&dev_attr_trigoutstatus.attr,
+	&dev_attr_chinstatus.attr,
+	&dev_attr_choutstatus.attr,
+#ifdef CONFIG_CORESIGHT_CTI_INTEGRATION_REGS
+	&dev_attr_itctrl.attr,
+	&dev_attr_ittrigin.attr,
+	&dev_attr_itchin.attr,
+	&dev_attr_ittrigout.attr,
+	&dev_attr_itchout.attr,
+	&dev_attr_itchoutack.attr,
+	&dev_attr_ittrigoutack.attr,
+	&dev_attr_ittriginack.attr,
+	&dev_attr_itchinack.attr,
+#endif
+	NULL,
+};
+
+/* CTI channel x-trigger programming */
+static int
+cti_trig_op_parse(struct device *dev, enum cti_chan_op op,
+		  enum cti_trig_dir dir, const char *buf, size_t size)
+{
+	u32 chan_idx;
+	u32 trig_idx;
+	int items, err = -EINVAL;
+
+	/* extract chan idx and trigger idx */
+	items = sscanf(buf, "%d %d", &chan_idx, &trig_idx);
+	if (items == 2) {
+		err = cti_channel_trig_op(dev, op, dir, chan_idx, trig_idx);
+		if (!err)
+			err = size;
+	}
+	return err;
+}
+
+static ssize_t trigin_attach_store(struct device *dev,
+				   struct device_attribute *attr,
+				   const char *buf, size_t size)
+{
+	return cti_trig_op_parse(dev, CTI_CHAN_ATTACH, CTI_TRIG_IN,
+				 buf, size);
+}
+static DEVICE_ATTR_WO(trigin_attach);
+
+static ssize_t trigin_detach_store(struct device *dev,
+				   struct device_attribute *attr,
+				   const char *buf, size_t size)
+{
+	return cti_trig_op_parse(dev, CTI_CHAN_DETACH, CTI_TRIG_IN,
+				 buf, size);
+}
+static DEVICE_ATTR_WO(trigin_detach);
+
+static ssize_t trigout_attach_store(struct device *dev,
+				    struct device_attribute *attr,
+				    const char *buf, size_t size)
+{
+	return cti_trig_op_parse(dev, CTI_CHAN_ATTACH, CTI_TRIG_OUT,
+				 buf, size);
+}
+static DEVICE_ATTR_WO(trigout_attach);
+
+static ssize_t trigout_detach_store(struct device *dev,
+				    struct device_attribute *attr,
+				    const char *buf, size_t size)
+{
+	return cti_trig_op_parse(dev, CTI_CHAN_DETACH, CTI_TRIG_OUT,
+				 buf, size);
+}
+static DEVICE_ATTR_WO(trigout_detach);
+
+
+static ssize_t chan_gate_enable_store(struct device *dev,
+				      struct device_attribute *attr,
+				      const char *buf, size_t size)
+{
+	int err = 0, channel = 0;
+
+	if (kstrtoint(buf, 0, &channel))
+		return -EINVAL;
+
+	err = cti_channel_gate_op(dev, CTI_GATE_CHAN_ENABLE, channel);
+	return err ? err : size;
+}
+
+static ssize_t chan_gate_enable_show(struct device *dev,
+				     struct device_attribute *attr,
+				     char *buf)
+{
+	struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent);
+	struct cti_config *cfg = &drvdata->config;
+	unsigned long ctigate_bitmask = cfg->ctigate;
+	int size = 0;
+
+	if (cfg->ctigate == 0)
+		size = sprintf(buf, "\n");
+	else
+		size = bitmap_print_to_pagebuf(true, buf, &ctigate_bitmask,
+					       cfg->nr_ctm_channels);
+	return size;
+}
+static DEVICE_ATTR_RW(chan_gate_enable);
+
+static ssize_t chan_gate_disable_store(struct device *dev,
+				       struct device_attribute *attr,
+				       const char *buf, size_t size)
+{
+	int err = 0, channel = 0;
+
+	if (kstrtoint(buf, 0, &channel))
+		return -EINVAL;
+
+	err = cti_channel_gate_op(dev, CTI_GATE_CHAN_DISABLE, channel);
+	return err ? err : size;
+}
+static DEVICE_ATTR_WO(chan_gate_disable);
+
+static int
+chan_op_parse(struct device *dev, enum cti_chan_set_op op, const char *buf)
+{
+	int err = 0, channel = 0;
+
+	if (kstrtoint(buf, 0, &channel))
+		return -EINVAL;
+
+	err = cti_channel_setop(dev, op, channel);
+	return err;
+
+}
+
+static ssize_t chan_set_store(struct device *dev,
+			      struct device_attribute *attr,
+			      const char *buf, size_t size)
+{
+	int err = chan_op_parse(dev, CTI_CHAN_SET, buf);
+
+	return err ? err : size;
+}
+static DEVICE_ATTR_WO(chan_set);
+
+static ssize_t chan_clear_store(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t size)
+{
+	int err = chan_op_parse(dev, CTI_CHAN_CLR, buf);
+
+	return err ? err : size;
+}
+static DEVICE_ATTR_WO(chan_clear);
+
+static ssize_t chan_pulse_store(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t size)
+{
+	int err = chan_op_parse(dev, CTI_CHAN_PULSE, buf);
+
+	return err ? err : size;
+}
+static DEVICE_ATTR_WO(chan_pulse);
+
+static ssize_t trig_filter_enable_show(struct device *dev,
+				       struct device_attribute *attr,
+				       char *buf)
+{
+	u32 val;
+	struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent);
+
+	spin_lock(&drvdata->spinlock);
+	val = drvdata->config.trig_filter_enable;
+	spin_unlock(&drvdata->spinlock);
+	return sprintf(buf, "%d\n", val);
+}
+
+static ssize_t trig_filter_enable_store(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf, size_t size)
+{
+	unsigned long val;
+	struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent);
+
+	if (kstrtoul(buf, 0, &val))
+		return -EINVAL;
+
+	spin_lock(&drvdata->spinlock);
+	drvdata->config.trig_filter_enable = !!val;
+	spin_unlock(&drvdata->spinlock);
+	return size;
+}
+static DEVICE_ATTR_RW(trig_filter_enable);
+
+static ssize_t trigout_filtered_show(struct device *dev,
+				     struct device_attribute *attr,
+				     char *buf)
+{
+	struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent);
+	struct cti_config *cfg = &drvdata->config;
+	int size = 0, nr_trig_max = cfg->nr_trig_max;
+	unsigned long mask = cfg->trig_out_filter;
+
+	if (mask)
+		size = bitmap_print_to_pagebuf(true, buf, &mask, nr_trig_max);
+	return size;
+}
+static DEVICE_ATTR_RO(trigout_filtered);
+
+/* clear all xtrigger / channel programming */
+static ssize_t chan_xtrigs_reset_store(struct device *dev,
+				       struct device_attribute *attr,
+				       const char *buf, size_t size)
+{
+	int i;
+	struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent);
+	struct cti_config *config = &drvdata->config;
+
+	spin_lock(&drvdata->spinlock);
+
+	/* clear the CTI trigger / channel programming registers */
+	for (i = 0; i < config->nr_trig_max; i++) {
+		config->ctiinen[i] = 0;
+		config->ctiouten[i] = 0;
+	}
+
+	/* clear the other regs */
+	config->ctigate = GENMASK(config->nr_ctm_channels - 1, 0);
+	config->asicctl = 0;
+	config->ctiappset = 0;
+	config->ctiinout_sel = 0;
+	config->xtrig_rchan_sel = 0;
+
+	/* if enabled then write through */
+	if (cti_active(config))
+		cti_write_all_hw_regs(drvdata);
+
+	spin_unlock(&drvdata->spinlock);
+	return size;
+}
+static DEVICE_ATTR_WO(chan_xtrigs_reset);
+
+/*
+ * Write to select a channel to view, read to display the
+ * cross triggers for the selected channel.
+ */
+static ssize_t chan_xtrigs_sel_store(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t size)
+{
+	unsigned long val;
+	struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent);
+
+	if (kstrtoul(buf, 0, &val))
+		return -EINVAL;
+	if (val > (drvdata->config.nr_ctm_channels - 1))
+		return -EINVAL;
+
+	spin_lock(&drvdata->spinlock);
+	drvdata->config.xtrig_rchan_sel = val;
+	spin_unlock(&drvdata->spinlock);
+	return size;
+}
+
+static ssize_t chan_xtrigs_sel_show(struct device *dev,
+				    struct device_attribute *attr,
+				    char *buf)
+{
+	unsigned long val;
+	struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent);
+
+	spin_lock(&drvdata->spinlock);
+	val = drvdata->config.xtrig_rchan_sel;
+	spin_unlock(&drvdata->spinlock);
+
+	return sprintf(buf, "%ld\n", val);
+}
+static DEVICE_ATTR_RW(chan_xtrigs_sel);
+
+static ssize_t chan_xtrigs_in_show(struct device *dev,
+				   struct device_attribute *attr,
+				   char *buf)
+{
+	struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent);
+	struct cti_config *cfg = &drvdata->config;
+	int used = 0, reg_idx;
+	int nr_trig_max = drvdata->config.nr_trig_max;
+	u32 chan_mask = BIT(cfg->xtrig_rchan_sel);
+
+	for (reg_idx = 0; reg_idx < nr_trig_max; reg_idx++) {
+		if (chan_mask & cfg->ctiinen[reg_idx])
+			used += sprintf(buf + used, "%d ", reg_idx);
+	}
+
+	used += sprintf(buf + used, "\n");
+	return used;
+}
+static DEVICE_ATTR_RO(chan_xtrigs_in);
+
+static ssize_t chan_xtrigs_out_show(struct device *dev,
+				    struct device_attribute *attr,
+				    char *buf)
+{
+	struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent);
+	struct cti_config *cfg = &drvdata->config;
+	int used = 0, reg_idx;
+	int nr_trig_max = drvdata->config.nr_trig_max;
+	u32 chan_mask = BIT(cfg->xtrig_rchan_sel);
+
+	for (reg_idx = 0; reg_idx < nr_trig_max; reg_idx++) {
+		if (chan_mask & cfg->ctiouten[reg_idx])
+			used += sprintf(buf + used, "%d ", reg_idx);
+	}
+
+	used += sprintf(buf + used, "\n");
+	return used;
+}
+static DEVICE_ATTR_RO(chan_xtrigs_out);
+
+static ssize_t print_chan_list(struct device *dev,
+			       char *buf, bool inuse)
+{
+	struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent);
+	struct cti_config *config = &drvdata->config;
+	int size, i;
+	unsigned long inuse_bits = 0, chan_mask;
+
+	/* scan regs to get bitmap of channels in use. */
+	spin_lock(&drvdata->spinlock);
+	for (i = 0; i < config->nr_trig_max; i++) {
+		inuse_bits |= config->ctiinen[i];
+		inuse_bits |= config->ctiouten[i];
+	}
+	spin_unlock(&drvdata->spinlock);
+
+	/* inverse bits if printing free channels */
+	if (!inuse)
+		inuse_bits = ~inuse_bits;
+
+	/* list of channels, or 'none' */
+	chan_mask = GENMASK(config->nr_ctm_channels - 1, 0);
+	if (inuse_bits & chan_mask)
+		size = bitmap_print_to_pagebuf(true, buf, &inuse_bits,
+					       config->nr_ctm_channels);
+	else
+		size = sprintf(buf, "\n");
+	return size;
+}
+
+static ssize_t chan_inuse_show(struct device *dev,
+			       struct device_attribute *attr,
+			       char *buf)
+{
+	return print_chan_list(dev, buf, true);
+}
+static DEVICE_ATTR_RO(chan_inuse);
+
+static ssize_t chan_free_show(struct device *dev,
+			      struct device_attribute *attr,
+			      char *buf)
+{
+	return print_chan_list(dev, buf, false);
+}
+static DEVICE_ATTR_RO(chan_free);
+
+static struct attribute *coresight_cti_channel_attrs[] = {
+	&dev_attr_trigin_attach.attr,
+	&dev_attr_trigin_detach.attr,
+	&dev_attr_trigout_attach.attr,
+	&dev_attr_trigout_detach.attr,
+	&dev_attr_trig_filter_enable.attr,
+	&dev_attr_trigout_filtered.attr,
+	&dev_attr_chan_gate_enable.attr,
+	&dev_attr_chan_gate_disable.attr,
+	&dev_attr_chan_set.attr,
+	&dev_attr_chan_clear.attr,
+	&dev_attr_chan_pulse.attr,
+	&dev_attr_chan_inuse.attr,
+	&dev_attr_chan_free.attr,
+	&dev_attr_chan_xtrigs_sel.attr,
+	&dev_attr_chan_xtrigs_in.attr,
+	&dev_attr_chan_xtrigs_out.attr,
+	&dev_attr_chan_xtrigs_reset.attr,
+	NULL,
+};
+
+/* Create the connections trigger groups and attrs dynamically */
+/*
+ * Each connection has dynamic group triggers<N> + name, trigin/out sigs/types
+ * attributes, + each device has static nr_trigger_cons giving the number
+ * of groups. e.g. in sysfs:-
+ * /cti_<name>/triggers0
+ * /cti_<name>/triggers1
+ * /cti_<name>/nr_trigger_cons
+ * where nr_trigger_cons = 2
+ */
+static ssize_t con_name_show(struct device *dev,
+			     struct device_attribute *attr,
+			     char *buf)
+{
+	struct dev_ext_attribute *ext_attr =
+		container_of(attr, struct dev_ext_attribute, attr);
+	struct cti_trig_con *con = (struct cti_trig_con *)ext_attr->var;
+
+	return sprintf(buf, "%s\n", con->con_dev_name);
+}
+
+static ssize_t trigin_sig_show(struct device *dev,
+			       struct device_attribute *attr,
+			       char *buf)
+{
+	struct dev_ext_attribute *ext_attr =
+		container_of(attr, struct dev_ext_attribute, attr);
+	struct cti_trig_con *con = (struct cti_trig_con *)ext_attr->var;
+	struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent);
+	struct cti_config *cfg = &drvdata->config;
+	unsigned long mask = con->con_in->used_mask;
+
+	return bitmap_print_to_pagebuf(true, buf, &mask, cfg->nr_trig_max);
+}
+
+static ssize_t trigout_sig_show(struct device *dev,
+				struct device_attribute *attr,
+				char *buf)
+{
+	struct dev_ext_attribute *ext_attr =
+		container_of(attr, struct dev_ext_attribute, attr);
+	struct cti_trig_con *con = (struct cti_trig_con *)ext_attr->var;
+	struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent);
+	struct cti_config *cfg = &drvdata->config;
+	unsigned long mask = con->con_out->used_mask;
+
+	return bitmap_print_to_pagebuf(true, buf, &mask, cfg->nr_trig_max);
+}
+
+/* convert a sig type id to a name */
+static const char *
+cti_sig_type_name(struct cti_trig_con *con, int used_count, bool in)
+{
+	int idx = 0;
+	struct cti_trig_grp *grp = in ? con->con_in : con->con_out;
+
+	if (used_count < grp->nr_sigs)
+		idx = grp->sig_types[used_count];
+	return sig_type_names[idx];
+}
+
+static ssize_t trigin_type_show(struct device *dev,
+				struct device_attribute *attr,
+				char *buf)
+{
+	struct dev_ext_attribute *ext_attr =
+		container_of(attr, struct dev_ext_attribute, attr);
+	struct cti_trig_con *con = (struct cti_trig_con *)ext_attr->var;
+	int sig_idx, used = 0;
+	const char *name;
+
+	for (sig_idx = 0; sig_idx < con->con_in->nr_sigs; sig_idx++) {
+		name = cti_sig_type_name(con, sig_idx, true);
+		used += sprintf(buf + used, "%s ", name);
+	}
+	used += sprintf(buf + used, "\n");
+	return used;
+}
+
+static ssize_t trigout_type_show(struct device *dev,
+				 struct device_attribute *attr,
+				 char *buf)
+{
+	struct dev_ext_attribute *ext_attr =
+		container_of(attr, struct dev_ext_attribute, attr);
+	struct cti_trig_con *con = (struct cti_trig_con *)ext_attr->var;
+	int sig_idx, used = 0;
+	const char *name;
+
+	for (sig_idx = 0; sig_idx < con->con_out->nr_sigs; sig_idx++) {
+		name = cti_sig_type_name(con, sig_idx, false);
+		used += sprintf(buf + used, "%s ", name);
+	}
+	used += sprintf(buf + used, "\n");
+	return used;
+}
+
+/*
+ * Array of show function names declared above to allow selection
+ * for the connection attributes
+ */
+static p_show_fn show_fns[CTI_CON_ATTR_MAX] = {
+	con_name_show,
+	trigin_sig_show,
+	trigout_sig_show,
+	trigin_type_show,
+	trigout_type_show,
+};
+
+static int cti_create_con_sysfs_attr(struct device *dev,
+				     struct cti_trig_con *con,
+				     enum cti_conn_attr_type attr_type,
+				     int attr_idx)
+{
+	struct dev_ext_attribute *eattr = 0;
+	char *name = 0;
+
+	eattr = devm_kzalloc(dev, sizeof(struct dev_ext_attribute),
+				    GFP_KERNEL);
+	if (eattr) {
+		name = devm_kstrdup(dev, con_attr_names[attr_type],
+				    GFP_KERNEL);
+		if (name) {
+			/* fill out the underlying attribute struct */
+			eattr->attr.attr.name = name;
+			eattr->attr.attr.mode = 0444;
+
+			/* now the device_attribute struct */
+			eattr->attr.show = show_fns[attr_type];
+		} else {
+			return -ENOMEM;
+		}
+	} else {
+		return -ENOMEM;
+	}
+	eattr->var = con;
+	con->con_attrs[attr_idx] = &eattr->attr.attr;
+	return 0;
+}
+
+static struct attribute_group *
+cti_create_con_sysfs_group(struct device *dev, struct cti_device *ctidev,
+			   int con_idx, struct cti_trig_con *tc)
+{
+	struct attribute_group *group = NULL;
+	int grp_idx;
+
+	group = devm_kzalloc(dev, sizeof(struct attribute_group), GFP_KERNEL);
+	if (!group)
+		return NULL;
+
+	group->name = devm_kasprintf(dev, GFP_KERNEL, "triggers%d", con_idx);
+	if (!group->name)
+		return NULL;
+
+	grp_idx = con_idx + CORESIGHT_CTI_STATIC_GROUPS_MAX - 1;
+	ctidev->con_groups[grp_idx] = group;
+	tc->attr_group = group;
+	return group;
+}
+
+/* create a triggers connection group and the attributes for that group */
+static int cti_create_con_attr_set(struct device *dev, int con_idx,
+				   struct cti_device *ctidev,
+				   struct cti_trig_con *tc)
+{
+	struct attribute_group *attr_group = NULL;
+	int attr_idx = 0;
+	int err = -ENOMEM;
+
+	attr_group = cti_create_con_sysfs_group(dev, ctidev, con_idx, tc);
+	if (!attr_group)
+		return -ENOMEM;
+
+	/* allocate NULL terminated array of attributes */
+	tc->con_attrs = devm_kcalloc(dev, CTI_CON_ATTR_MAX + 1,
+				     sizeof(struct attribute *), GFP_KERNEL);
+	if (!tc->con_attrs)
+		return -ENOMEM;
+
+	err = cti_create_con_sysfs_attr(dev, tc, CTI_CON_ATTR_NAME,
+					attr_idx++);
+	if (err)
+		return err;
+
+	if (tc->con_in->nr_sigs > 0) {
+		err = cti_create_con_sysfs_attr(dev, tc,
+						CTI_CON_ATTR_TRIGIN_SIG,
+						attr_idx++);
+		if (err)
+			return err;
+
+		err = cti_create_con_sysfs_attr(dev, tc,
+						CTI_CON_ATTR_TRIGIN_TYPES,
+						attr_idx++);
+		if (err)
+			return err;
+	}
+
+	if (tc->con_out->nr_sigs > 0) {
+		err = cti_create_con_sysfs_attr(dev, tc,
+						CTI_CON_ATTR_TRIGOUT_SIG,
+						attr_idx++);
+		if (err)
+			return err;
+
+		err = cti_create_con_sysfs_attr(dev, tc,
+						CTI_CON_ATTR_TRIGOUT_TYPES,
+						attr_idx++);
+		if (err)
+			return err;
+	}
+	attr_group->attrs = tc->con_attrs;
+	return 0;
+}
+
+/* create the array of group pointers for the CTI sysfs groups */
+int cti_create_cons_groups(struct device *dev, struct cti_device *ctidev)
+{
+	int nr_groups;
+
+	/* nr groups = dynamic + static + NULL terminator */
+	nr_groups = ctidev->nr_trig_con + CORESIGHT_CTI_STATIC_GROUPS_MAX;
+	ctidev->con_groups = devm_kcalloc(dev, nr_groups,
+					  sizeof(struct attribute_group *),
+					  GFP_KERNEL);
+	if (!ctidev->con_groups)
+		return -ENOMEM;
+	return 0;
+}
+
+int cti_create_cons_sysfs(struct device *dev, struct cti_drvdata *drvdata)
+{
+	struct cti_device *ctidev = &drvdata->ctidev;
+	int err = 0, con_idx = 0, i;
+	struct cti_trig_con *tc = NULL;
+
+	err = cti_create_cons_groups(dev, ctidev);
+	if (err)
+		return err;
+
+	/* populate first locations with the static set of groups */
+	for (i = 0; i < (CORESIGHT_CTI_STATIC_GROUPS_MAX - 1); i++)
+		ctidev->con_groups[i] = coresight_cti_groups[i];
+
+	/* add dynamic set for each connection */
+	list_for_each_entry(tc, &ctidev->trig_cons, node) {
+		err = cti_create_con_attr_set(dev, con_idx++, ctidev, tc);
+		if (err)
+			break;
+	}
+	return err;
+}
+
+/* attribute and group sysfs tables. */
+static const struct attribute_group coresight_cti_group = {
+	.attrs = coresight_cti_attrs,
+};
+
+static const struct attribute_group coresight_cti_mgmt_group = {
+	.attrs = coresight_cti_mgmt_attrs,
+	.name = "mgmt",
+};
+
+static const struct attribute_group coresight_cti_regs_group = {
+	.attrs = coresight_cti_regs_attrs,
+	.name = "regs",
+};
+
+static const struct attribute_group coresight_cti_channels_group = {
+	.attrs = coresight_cti_channel_attrs,
+	.name = "channels",
+};
+
+const struct attribute_group *
+coresight_cti_groups[CORESIGHT_CTI_STATIC_GROUPS_MAX] = {
+	&coresight_cti_group,
+	&coresight_cti_mgmt_group,
+	&coresight_cti_regs_group,
+	&coresight_cti_channels_group,
+	NULL,
+};
diff --git a/drivers/hwtracing/coresight/coresight-cti.c b/drivers/hwtracing/coresight/coresight-cti.c
new file mode 100644
index 0000000..aa6e024
--- /dev/null
+++ b/drivers/hwtracing/coresight/coresight-cti.c
@@ -0,0 +1,745 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018 Linaro Limited, All rights reserved.
+ * Author: Mike Leach <mike.leach@linaro.org>
+ */
+
+#include <linux/property.h>
+#include "coresight-cti.h"
+
+/**
+ * CTI devices can be associated with a PE, or be connected to CoreSight
+ * hardware. We have a list of all CTIs irrespective of CPU bound or
+ * otherwise.
+ *
+ * We assume that the non-CPU CTIs are always powered as we do with sinks etc.
+ *
+ * We leave the client to figure out if all the CTIs are interconnected with
+ * the same CTM, in general this is the case but does not always have to be.
+ */
+
+/* net of CTI devices connected via CTM */
+LIST_HEAD(ect_net);
+
+/* protect the list */
+static DEFINE_MUTEX(ect_mutex);
+
+#define csdev_to_cti_drvdata(csdev)	\
+	dev_get_drvdata(csdev->dev.parent)
+
+/*
+ * CTI naming. CTI bound to cores will have the name cti_cpu<N> where
+ * N is the CPU ID. System CTIs will have the name cti_sys<I> where I
+ * is an index allocated by order of discovery.
+ *
+ * CTI device name list - for CTI not bound to cores.
+ */
+DEFINE_CORESIGHT_DEVLIST(cti_sys_devs, "cti_sys");
+
+/* write set of regs to hardware - call with spinlock claimed */
+void cti_write_all_hw_regs(struct cti_drvdata *drvdata)
+{
+	struct cti_config *config = &drvdata->config;
+	int i;
+
+	CS_UNLOCK(drvdata->base);
+
+	/* disable CTI before writing registers */
+	writel_relaxed(0, drvdata->base + CTICONTROL);
+
+	/* write the CTI trigger registers */
+	for (i = 0; i < config->nr_trig_max; i++) {
+		writel_relaxed(config->ctiinen[i], drvdata->base + CTIINEN(i));
+		writel_relaxed(config->ctiouten[i],
+			       drvdata->base + CTIOUTEN(i));
+	}
+
+	/* other regs */
+	writel_relaxed(config->ctigate, drvdata->base + CTIGATE);
+	writel_relaxed(config->asicctl, drvdata->base + ASICCTL);
+	writel_relaxed(config->ctiappset, drvdata->base + CTIAPPSET);
+
+	/* re-enable CTI */
+	writel_relaxed(1, drvdata->base + CTICONTROL);
+
+	CS_LOCK(drvdata->base);
+}
+
+static void cti_enable_hw_smp_call(void *info)
+{
+	struct cti_drvdata *drvdata = info;
+
+	cti_write_all_hw_regs(drvdata);
+}
+
+/* write regs to hardware and enable */
+static int cti_enable_hw(struct cti_drvdata *drvdata)
+{
+	struct cti_config *config = &drvdata->config;
+	struct device *dev = &drvdata->csdev->dev;
+	int rc = 0;
+
+	pm_runtime_get_sync(dev->parent);
+	spin_lock(&drvdata->spinlock);
+
+	/* no need to do anything if enabled or unpowered*/
+	if (config->hw_enabled || !config->hw_powered)
+		goto cti_state_unchanged;
+
+	/* claim the device */
+	rc = coresight_claim_device(drvdata->base);
+	if (rc)
+		goto cti_err_not_enabled;
+
+	if (drvdata->ctidev.cpu >= 0) {
+		rc = smp_call_function_single(drvdata->ctidev.cpu,
+					      cti_enable_hw_smp_call,
+					      drvdata, 1);
+		if (rc)
+			goto cti_err_not_enabled;
+	} else {
+		cti_write_all_hw_regs(drvdata);
+	}
+
+	config->hw_enabled = true;
+	atomic_inc(&drvdata->config.enable_req_count);
+	spin_unlock(&drvdata->spinlock);
+	return rc;
+
+cti_state_unchanged:
+	atomic_inc(&drvdata->config.enable_req_count);
+
+	/* cannot enable due to error */
+cti_err_not_enabled:
+	spin_unlock(&drvdata->spinlock);
+	pm_runtime_put(dev->parent);
+	return rc;
+}
+
+/* disable hardware */
+static int cti_disable_hw(struct cti_drvdata *drvdata)
+{
+	struct cti_config *config = &drvdata->config;
+	struct device *dev = &drvdata->csdev->dev;
+
+	spin_lock(&drvdata->spinlock);
+
+	/* check refcount - disable on 0 */
+	if (atomic_dec_return(&drvdata->config.enable_req_count) > 0)
+		goto cti_not_disabled;
+
+	/* no need to do anything if disabled or cpu unpowered */
+	if (!config->hw_enabled || !config->hw_powered)
+		goto cti_not_disabled;
+
+	CS_UNLOCK(drvdata->base);
+
+	/* disable CTI */
+	writel_relaxed(0, drvdata->base + CTICONTROL);
+	config->hw_enabled = false;
+
+	coresight_disclaim_device_unlocked(drvdata->base);
+	CS_LOCK(drvdata->base);
+	spin_unlock(&drvdata->spinlock);
+	pm_runtime_put(dev);
+	return 0;
+
+	/* not disabled this call */
+cti_not_disabled:
+	spin_unlock(&drvdata->spinlock);
+	return 0;
+}
+
+void cti_write_single_reg(struct cti_drvdata *drvdata, int offset, u32 value)
+{
+	CS_UNLOCK(drvdata->base);
+	writel_relaxed(value, drvdata->base + offset);
+	CS_LOCK(drvdata->base);
+}
+
+void cti_write_intack(struct device *dev, u32 ackval)
+{
+	struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent);
+	struct cti_config *config = &drvdata->config;
+
+	spin_lock(&drvdata->spinlock);
+	/* write if enabled */
+	if (cti_active(config))
+		cti_write_single_reg(drvdata, CTIINTACK, ackval);
+	spin_unlock(&drvdata->spinlock);
+}
+
+/*
+ * Look at the HW DEVID register for some of the HW settings.
+ * DEVID[15:8] - max number of in / out triggers.
+ */
+#define CTI_DEVID_MAXTRIGS(devid_val) ((int) BMVAL(devid_val, 8, 15))
+
+/* DEVID[19:16] - number of CTM channels */
+#define CTI_DEVID_CTMCHANNELS(devid_val) ((int) BMVAL(devid_val, 16, 19))
+
+static void cti_set_default_config(struct device *dev,
+				   struct cti_drvdata *drvdata)
+{
+	struct cti_config *config = &drvdata->config;
+	u32 devid;
+
+	devid = readl_relaxed(drvdata->base + CORESIGHT_DEVID);
+	config->nr_trig_max = CTI_DEVID_MAXTRIGS(devid);
+
+	/*
+	 * no current hardware should exceed this, but protect the driver
+	 * in case of fault / out of spec hw
+	 */
+	if (config->nr_trig_max > CTIINOUTEN_MAX) {
+		dev_warn_once(dev,
+			"Limiting HW MaxTrig value(%d) to driver max(%d)\n",
+			config->nr_trig_max, CTIINOUTEN_MAX);
+		config->nr_trig_max = CTIINOUTEN_MAX;
+	}
+
+	config->nr_ctm_channels = CTI_DEVID_CTMCHANNELS(devid);
+
+	/* Most regs default to 0 as zalloc'ed except...*/
+	config->trig_filter_enable = true;
+	config->ctigate = GENMASK(config->nr_ctm_channels - 1, 0);
+	atomic_set(&config->enable_req_count, 0);
+}
+
+/*
+ * Add a connection entry to the list of connections for this
+ * CTI device.
+ */
+int cti_add_connection_entry(struct device *dev, struct cti_drvdata *drvdata,
+			     struct cti_trig_con *tc,
+			     struct coresight_device *csdev,
+			     const char *assoc_dev_name)
+{
+	struct cti_device *cti_dev = &drvdata->ctidev;
+
+	tc->con_dev = csdev;
+	/*
+	 * Prefer actual associated CS device dev name to supplied value -
+	 * which is likely to be node name / other conn name.
+	 */
+	if (csdev)
+		tc->con_dev_name = dev_name(&csdev->dev);
+	else if (assoc_dev_name != NULL) {
+		tc->con_dev_name = devm_kstrdup(dev,
+						assoc_dev_name, GFP_KERNEL);
+		if (!tc->con_dev_name)
+			return -ENOMEM;
+	}
+	list_add_tail(&tc->node, &cti_dev->trig_cons);
+	cti_dev->nr_trig_con++;
+
+	/* add connection usage bit info to overall info */
+	drvdata->config.trig_in_use |= tc->con_in->used_mask;
+	drvdata->config.trig_out_use |= tc->con_out->used_mask;
+
+	return 0;
+}
+
+/* create a trigger connection with appropriately sized signal groups */
+struct cti_trig_con *cti_allocate_trig_con(struct device *dev, int in_sigs,
+					   int out_sigs)
+{
+	struct cti_trig_con *tc = NULL;
+	struct cti_trig_grp *in = NULL, *out = NULL;
+
+	tc = devm_kzalloc(dev, sizeof(struct cti_trig_con), GFP_KERNEL);
+	if (!tc)
+		return tc;
+
+	in = devm_kzalloc(dev,
+			  offsetof(struct cti_trig_grp, sig_types[in_sigs]),
+			  GFP_KERNEL);
+	if (!in)
+		return NULL;
+
+	out = devm_kzalloc(dev,
+			   offsetof(struct cti_trig_grp, sig_types[out_sigs]),
+			   GFP_KERNEL);
+	if (!out)
+		return NULL;
+
+	tc->con_in = in;
+	tc->con_out = out;
+	tc->con_in->nr_sigs = in_sigs;
+	tc->con_out->nr_sigs = out_sigs;
+	return tc;
+}
+
+/*
+ * Add a default connection if nothing else is specified.
+ * single connection based on max in/out info, no assoc device
+ */
+int cti_add_default_connection(struct device *dev, struct cti_drvdata *drvdata)
+{
+	int ret = 0;
+	int n_trigs = drvdata->config.nr_trig_max;
+	u32 n_trig_mask = GENMASK(n_trigs - 1, 0);
+	struct cti_trig_con *tc = NULL;
+
+	/*
+	 * Assume max trigs for in and out,
+	 * all used, default sig types allocated
+	 */
+	tc = cti_allocate_trig_con(dev, n_trigs, n_trigs);
+	if (!tc)
+		return -ENOMEM;
+
+	tc->con_in->used_mask = n_trig_mask;
+	tc->con_out->used_mask = n_trig_mask;
+	ret = cti_add_connection_entry(dev, drvdata, tc, NULL, "default");
+	return ret;
+}
+
+/** cti channel api **/
+/* attach/detach channel from trigger - write through if enabled. */
+int cti_channel_trig_op(struct device *dev, enum cti_chan_op op,
+			enum cti_trig_dir direction, u32 channel_idx,
+			u32 trigger_idx)
+{
+	struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent);
+	struct cti_config *config = &drvdata->config;
+	u32 trig_bitmask;
+	u32 chan_bitmask;
+	u32 reg_value;
+	int reg_offset;
+
+	/* ensure indexes in range */
+	if ((channel_idx >= config->nr_ctm_channels) ||
+	   (trigger_idx >= config->nr_trig_max))
+		return -EINVAL;
+
+	trig_bitmask = BIT(trigger_idx);
+
+	/* ensure registered triggers and not out filtered */
+	if (direction == CTI_TRIG_IN)	{
+		if (!(trig_bitmask & config->trig_in_use))
+			return -EINVAL;
+	} else {
+		if (!(trig_bitmask & config->trig_out_use))
+			return -EINVAL;
+
+		if ((config->trig_filter_enable) &&
+		    (config->trig_out_filter & trig_bitmask))
+			return -EINVAL;
+	}
+
+	/* update the local register values */
+	chan_bitmask = BIT(channel_idx);
+	reg_offset = (direction == CTI_TRIG_IN ? CTIINEN(trigger_idx) :
+		      CTIOUTEN(trigger_idx));
+
+	spin_lock(&drvdata->spinlock);
+
+	/* read - modify write - the trigger / channel enable value */
+	reg_value = direction == CTI_TRIG_IN ? config->ctiinen[trigger_idx] :
+		     config->ctiouten[trigger_idx];
+	if (op == CTI_CHAN_ATTACH)
+		reg_value |= chan_bitmask;
+	else
+		reg_value &= ~chan_bitmask;
+
+	/* write local copy */
+	if (direction == CTI_TRIG_IN)
+		config->ctiinen[trigger_idx] = reg_value;
+	else
+		config->ctiouten[trigger_idx] = reg_value;
+
+	/* write through if enabled */
+	if (cti_active(config))
+		cti_write_single_reg(drvdata, reg_offset, reg_value);
+	spin_unlock(&drvdata->spinlock);
+	return 0;
+}
+
+int cti_channel_gate_op(struct device *dev, enum cti_chan_gate_op op,
+			u32 channel_idx)
+{
+	struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent);
+	struct cti_config *config = &drvdata->config;
+	u32 chan_bitmask;
+	u32 reg_value;
+	int err = 0;
+
+	if (channel_idx >= config->nr_ctm_channels)
+		return -EINVAL;
+
+	chan_bitmask = BIT(channel_idx);
+
+	spin_lock(&drvdata->spinlock);
+	reg_value = config->ctigate;
+	switch (op) {
+	case CTI_GATE_CHAN_ENABLE:
+		reg_value |= chan_bitmask;
+		break;
+
+	case CTI_GATE_CHAN_DISABLE:
+		reg_value &= ~chan_bitmask;
+		break;
+
+	default:
+		err = -EINVAL;
+		break;
+	}
+	if (err == 0) {
+		config->ctigate = reg_value;
+		if (cti_active(config))
+			cti_write_single_reg(drvdata, CTIGATE, reg_value);
+	}
+	spin_unlock(&drvdata->spinlock);
+	return err;
+}
+
+int cti_channel_setop(struct device *dev, enum cti_chan_set_op op,
+		      u32 channel_idx)
+{
+	struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent);
+	struct cti_config *config = &drvdata->config;
+	u32 chan_bitmask;
+	u32 reg_value;
+	u32 reg_offset;
+	int err = 0;
+
+	if (channel_idx >= config->nr_ctm_channels)
+		return -EINVAL;
+
+	chan_bitmask = BIT(channel_idx);
+
+	spin_lock(&drvdata->spinlock);
+	reg_value = config->ctiappset;
+	switch (op) {
+	case CTI_CHAN_SET:
+		config->ctiappset |= chan_bitmask;
+		reg_value  = config->ctiappset;
+		reg_offset = CTIAPPSET;
+		break;
+
+	case CTI_CHAN_CLR:
+		config->ctiappset &= ~chan_bitmask;
+		reg_value = chan_bitmask;
+		reg_offset = CTIAPPCLEAR;
+		break;
+
+	case CTI_CHAN_PULSE:
+		config->ctiappset &= ~chan_bitmask;
+		reg_value = chan_bitmask;
+		reg_offset = CTIAPPPULSE;
+		break;
+
+	default:
+		err = -EINVAL;
+		break;
+	}
+
+	if ((err == 0) && cti_active(config))
+		cti_write_single_reg(drvdata, reg_offset, reg_value);
+	spin_unlock(&drvdata->spinlock);
+
+	return err;
+}
+
+/*
+ * Look for a matching connection device name in the list of connections.
+ * If found then swap in the csdev name, set trig con association pointer
+ * and return found.
+ */
+static bool
+cti_match_fixup_csdev(struct cti_device *ctidev, const char *node_name,
+		      struct coresight_device *csdev)
+{
+	struct cti_trig_con *tc;
+
+	list_for_each_entry(tc, &ctidev->trig_cons, node) {
+		if (tc->con_dev_name) {
+			if (!strcmp(node_name, tc->con_dev_name)) {
+				/* match: so swap in csdev name & dev */
+				tc->con_dev_name = dev_name(&csdev->dev);
+				tc->con_dev = csdev;
+				return true;
+			}
+		}
+	}
+	return false;
+}
+
+/*
+ * Search the cti list to add an associated CTI into the supplied CS device
+ * This will set the association if CTI declared before the CS device.
+ * (called from coresight_register() with coresight_mutex locked).
+ */
+void cti_add_assoc_to_csdev(struct coresight_device *csdev)
+{
+	struct cti_drvdata *ect_item;
+	struct cti_device *ctidev;
+	const char *node_name = NULL;
+
+	/* protect the list */
+	mutex_lock(&ect_mutex);
+
+	/* exit if current is an ECT device.*/
+	if ((csdev->type == CORESIGHT_DEV_TYPE_ECT) || list_empty(&ect_net))
+		goto cti_add_done;
+
+	/* if we didn't find the csdev previously we used the fwnode name */
+	node_name = cti_plat_get_node_name(dev_fwnode(csdev->dev.parent));
+	if (!node_name)
+		goto cti_add_done;
+
+	/* for each CTI in list... */
+	list_for_each_entry(ect_item, &ect_net, node) {
+		ctidev = &ect_item->ctidev;
+		if (cti_match_fixup_csdev(ctidev, node_name, csdev)) {
+			/*
+			 * if we found a matching csdev then update the ECT
+			 * association pointer for the device with this CTI.
+			 */
+			csdev->ect_dev = ect_item->csdev;
+			break;
+		}
+	}
+cti_add_done:
+	mutex_unlock(&ect_mutex);
+}
+EXPORT_SYMBOL_GPL(cti_add_assoc_to_csdev);
+
+/*
+ * Removing the associated devices is easier.
+ * A CTI will not have a value for csdev->ect_dev.
+ */
+void cti_remove_assoc_from_csdev(struct coresight_device *csdev)
+{
+	struct cti_drvdata *ctidrv;
+	struct cti_trig_con *tc;
+	struct cti_device *ctidev;
+
+	mutex_lock(&ect_mutex);
+	if (csdev->ect_dev) {
+		ctidrv = csdev_to_cti_drvdata(csdev->ect_dev);
+		ctidev = &ctidrv->ctidev;
+		list_for_each_entry(tc, &ctidev->trig_cons, node) {
+			if (tc->con_dev == csdev->ect_dev) {
+				tc->con_dev = NULL;
+				break;
+			}
+		}
+		csdev->ect_dev = NULL;
+	}
+	mutex_unlock(&ect_mutex);
+}
+EXPORT_SYMBOL_GPL(cti_remove_assoc_from_csdev);
+
+/*
+ * Update the cross references where the associated device was found
+ * while we were building the connection info. This will occur if the
+ * assoc device was registered before the CTI.
+ */
+static void cti_update_conn_xrefs(struct cti_drvdata *drvdata)
+{
+	struct cti_trig_con *tc;
+	struct cti_device *ctidev = &drvdata->ctidev;
+
+	list_for_each_entry(tc, &ctidev->trig_cons, node) {
+		if (tc->con_dev)
+			/* set tc->con_dev->ect_dev */
+			coresight_set_assoc_ectdev_mutex(tc->con_dev,
+							 drvdata->csdev);
+	}
+}
+
+static void cti_remove_conn_xrefs(struct cti_drvdata *drvdata)
+{
+	struct cti_trig_con *tc;
+	struct cti_device *ctidev = &drvdata->ctidev;
+
+	list_for_each_entry(tc, &ctidev->trig_cons, node) {
+		if (tc->con_dev) {
+			coresight_set_assoc_ectdev_mutex(tc->con_dev,
+							 NULL);
+		}
+	}
+}
+
+/** cti ect operations **/
+int cti_enable(struct coresight_device *csdev)
+{
+	struct cti_drvdata *drvdata = csdev_to_cti_drvdata(csdev);
+
+	return cti_enable_hw(drvdata);
+}
+
+int cti_disable(struct coresight_device *csdev)
+{
+	struct cti_drvdata *drvdata = csdev_to_cti_drvdata(csdev);
+
+	return cti_disable_hw(drvdata);
+}
+
+const struct coresight_ops_ect cti_ops_ect = {
+	.enable = cti_enable,
+	.disable = cti_disable,
+};
+
+const struct coresight_ops cti_ops = {
+	.ect_ops = &cti_ops_ect,
+};
+
+/*
+ * Free up CTI specific resources
+ * called by dev->release, need to call down to underlying csdev release.
+ */
+static void cti_device_release(struct device *dev)
+{
+	struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent);
+	struct cti_drvdata *ect_item, *ect_tmp;
+
+	mutex_lock(&ect_mutex);
+	cti_remove_conn_xrefs(drvdata);
+
+	/* remove from the list */
+	list_for_each_entry_safe(ect_item, ect_tmp, &ect_net, node) {
+		if (ect_item == drvdata) {
+			list_del(&ect_item->node);
+			break;
+		}
+	}
+	mutex_unlock(&ect_mutex);
+
+	if (drvdata->csdev_release)
+		drvdata->csdev_release(dev);
+}
+
+static int cti_probe(struct amba_device *adev, const struct amba_id *id)
+{
+	int ret = 0;
+	void __iomem *base;
+	struct device *dev = &adev->dev;
+	struct cti_drvdata *drvdata = NULL;
+	struct coresight_desc cti_desc;
+	struct coresight_platform_data *pdata = NULL;
+	struct resource *res = &adev->res;
+
+	/* driver data*/
+	drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL);
+	if (!drvdata) {
+		ret = -ENOMEM;
+		dev_info(dev, "%s, mem err\n", __func__);
+		goto err_out;
+	}
+
+	/* Validity for the resource is already checked by the AMBA core */
+	base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base)) {
+		ret = PTR_ERR(base);
+		dev_err(dev, "%s, remap err\n", __func__);
+		goto err_out;
+	}
+	drvdata->base = base;
+
+	dev_set_drvdata(dev, drvdata);
+
+	/* default CTI device info  */
+	drvdata->ctidev.cpu = -1;
+	drvdata->ctidev.nr_trig_con = 0;
+	drvdata->ctidev.ctm_id = 0;
+	INIT_LIST_HEAD(&drvdata->ctidev.trig_cons);
+
+	spin_lock_init(&drvdata->spinlock);
+
+	/* initialise CTI driver config values */
+	cti_set_default_config(dev, drvdata);
+
+	pdata = coresight_cti_get_platform_data(dev);
+	if (IS_ERR(pdata)) {
+		dev_err(dev, "coresight_cti_get_platform_data err\n");
+		ret =  PTR_ERR(pdata);
+		goto err_out;
+	}
+
+	/* default to powered - could change on PM notifications */
+	drvdata->config.hw_powered = true;
+
+	/* set up device name - will depend if cpu bound or otherwise */
+	if (drvdata->ctidev.cpu >= 0)
+		cti_desc.name = devm_kasprintf(dev, GFP_KERNEL, "cti_cpu%d",
+					       drvdata->ctidev.cpu);
+	else
+		cti_desc.name = coresight_alloc_device_name(&cti_sys_devs, dev);
+	if (!cti_desc.name) {
+		ret = -ENOMEM;
+		goto err_out;
+	}
+
+	/* create dynamic attributes for connections */
+	ret = cti_create_cons_sysfs(dev, drvdata);
+	if (ret) {
+		dev_err(dev, "%s: create dynamic sysfs entries failed\n",
+			cti_desc.name);
+		goto err_out;
+	}
+
+	/* set up coresight component description */
+	cti_desc.pdata = pdata;
+	cti_desc.type = CORESIGHT_DEV_TYPE_ECT;
+	cti_desc.subtype.ect_subtype = CORESIGHT_DEV_SUBTYPE_ECT_CTI;
+	cti_desc.ops = &cti_ops;
+	cti_desc.groups = drvdata->ctidev.con_groups;
+	cti_desc.dev = dev;
+	drvdata->csdev = coresight_register(&cti_desc);
+	if (IS_ERR(drvdata->csdev)) {
+		ret = PTR_ERR(drvdata->csdev);
+		goto err_out;
+	}
+
+	/* add to list of CTI devices */
+	mutex_lock(&ect_mutex);
+	list_add(&drvdata->node, &ect_net);
+	/* set any cross references */
+	cti_update_conn_xrefs(drvdata);
+	mutex_unlock(&ect_mutex);
+
+	/* set up release chain */
+	drvdata->csdev_release = drvdata->csdev->dev.release;
+	drvdata->csdev->dev.release = cti_device_release;
+
+	/* all done - dec pm refcount */
+	pm_runtime_put(&adev->dev);
+	dev_info(&drvdata->csdev->dev, "CTI initialized\n");
+	return 0;
+
+err_out:
+	return ret;
+}
+
+static struct amba_cs_uci_id uci_id_cti[] = {
+	{
+		/*  CTI UCI data */
+		.devarch	= 0x47701a14, /* CTI v2 */
+		.devarch_mask	= 0xfff0ffff,
+		.devtype	= 0x00000014, /* maj(0x4-debug) min(0x1-ECT) */
+	}
+};
+
+static const struct amba_id cti_ids[] = {
+	CS_AMBA_ID(0x000bb906), /* Coresight CTI (SoC 400), C-A72, C-A57 */
+	CS_AMBA_ID(0x000bb922), /* CTI - C-A8 */
+	CS_AMBA_ID(0x000bb9a8), /* CTI - C-A53 */
+	CS_AMBA_ID(0x000bb9aa), /* CTI - C-A73 */
+	CS_AMBA_UCI_ID(0x000bb9da, uci_id_cti), /* CTI - C-A35 */
+	CS_AMBA_UCI_ID(0x000bb9ed, uci_id_cti), /* Coresight CTI (SoC 600) */
+	{ 0, 0},
+};
+
+static struct amba_driver cti_driver = {
+	.drv = {
+		.name	= "coresight-cti",
+		.owner = THIS_MODULE,
+		.suppress_bind_attrs = true,
+	},
+	.probe		= cti_probe,
+	.id_table	= cti_ids,
+};
+builtin_amba_driver(cti_driver);
diff --git a/drivers/hwtracing/coresight/coresight-cti.h b/drivers/hwtracing/coresight/coresight-cti.h
new file mode 100644
index 0000000..004df3a
--- /dev/null
+++ b/drivers/hwtracing/coresight/coresight-cti.h
@@ -0,0 +1,235 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2018 Linaro Limited, All rights reserved.
+ * Author: Mike Leach <mike.leach@linaro.org>
+ */
+
+#ifndef _CORESIGHT_CORESIGHT_CTI_H
+#define _CORESIGHT_CORESIGHT_CTI_H
+
+#include <asm/local.h>
+#include <linux/spinlock.h>
+#include "coresight-priv.h"
+
+/*
+ * Device registers
+ * 0x000 - 0x144: CTI programming and status
+ * 0xEDC - 0xEF8: CTI integration test.
+ * 0xF00 - 0xFFC: Coresight management registers.
+ */
+/* CTI programming registers */
+#define CTICONTROL		0x000
+#define CTIINTACK		0x010
+#define CTIAPPSET		0x014
+#define CTIAPPCLEAR		0x018
+#define CTIAPPPULSE		0x01C
+#define CTIINEN(n)		(0x020 + (4 * n))
+#define CTIOUTEN(n)		(0x0A0 + (4 * n))
+#define CTITRIGINSTATUS		0x130
+#define CTITRIGOUTSTATUS	0x134
+#define CTICHINSTATUS		0x138
+#define CTICHOUTSTATUS		0x13C
+#define CTIGATE			0x140
+#define ASICCTL			0x144
+/* Integration test registers */
+#define ITCHINACK		0xEDC /* WO CTI CSSoc 400 only*/
+#define ITTRIGINACK		0xEE0 /* WO CTI CSSoc 400 only*/
+#define ITCHOUT			0xEE4 /* WO RW-600 */
+#define ITTRIGOUT		0xEE8 /* WO RW-600 */
+#define ITCHOUTACK		0xEEC /* RO CTI CSSoc 400 only*/
+#define ITTRIGOUTACK		0xEF0 /* RO CTI CSSoc 400 only*/
+#define ITCHIN			0xEF4 /* RO */
+#define ITTRIGIN		0xEF8 /* RO */
+/* management registers */
+#define CTIDEVAFF0		0xFA8
+#define CTIDEVAFF1		0xFAC
+
+/*
+ * CTI CSSoc 600 has a max of 32 trigger signals per direction.
+ * CTI CSSoc 400 has 8 IO triggers - other CTIs can be impl def.
+ * Max of in and out defined in the DEVID register.
+ * - pick up actual number used from .dts parameters if present.
+ */
+#define CTIINOUTEN_MAX		32
+
+/**
+ * Group of related trigger signals
+ *
+ * @nr_sigs: number of signals in the group.
+ * @used_mask: bitmask representing the signal indexes in the group.
+ * @sig_types: array of types for the signals, length nr_sigs.
+ */
+struct cti_trig_grp {
+	int nr_sigs;
+	u32 used_mask;
+	int sig_types[];
+};
+
+/**
+ * Trigger connection - connection between a CTI and other (coresight) device
+ * lists input and output trigger signals for the device
+ *
+ * @con_in: connected CTIIN signals for the device.
+ * @con_out: connected CTIOUT signals for the device.
+ * @con_dev: coresight device connected to the CTI, NULL if not CS device
+ * @con_dev_name: name of connected device (CS or CPU)
+ * @node: entry node in list of connections.
+ * @con_attrs: Dynamic sysfs attributes specific to this connection.
+ * @attr_group: Dynamic attribute group created for this connection.
+ */
+struct cti_trig_con {
+	struct cti_trig_grp *con_in;
+	struct cti_trig_grp *con_out;
+	struct coresight_device *con_dev;
+	const char *con_dev_name;
+	struct list_head node;
+	struct attribute **con_attrs;
+	struct attribute_group *attr_group;
+};
+
+/**
+ * struct cti_device - description of CTI device properties.
+ *
+ * @nt_trig_con: Number of external devices connected to this device.
+ * @ctm_id: which CTM this device is connected to (by default it is
+ *          assumed there is a single CTM per SoC, ID 0).
+ * @trig_cons: list of connections to this device.
+ * @cpu: CPU ID if associated with CPU, -1 otherwise.
+ * @con_groups: combined static and dynamic sysfs groups for trigger
+ *		connections.
+ */
+struct cti_device {
+	int nr_trig_con;
+	u32 ctm_id;
+	struct list_head trig_cons;
+	int cpu;
+	const struct attribute_group **con_groups;
+};
+
+/**
+ * struct cti_config - configuration of the CTI device hardware
+ *
+ * @nr_trig_max: Max number of trigger signals implemented on device.
+ *		 (max of trig_in or trig_out) - from ID register.
+ * @nr_ctm_channels: number of available CTM channels - from ID register.
+ * @enable_req_count: CTI is enabled alongside >=1 associated devices.
+ * @hw_enabled: true if hw is currently enabled.
+ * @hw_powered: true if associated cpu powered on, or no cpu.
+ * @trig_in_use: bitfield of in triggers registered as in use.
+ * @trig_out_use: bitfield of out triggers registered as in use.
+ * @trig_out_filter: bitfield of out triggers that are blocked if filter
+ *		     enabled. Typically this would be dbgreq / restart on
+ *		     a core CTI.
+ * @trig_filter_enable: 1 if filtering enabled.
+ * @xtrig_rchan_sel: channel selection for xtrigger connection show.
+ * @ctiappset: CTI Software application channel set.
+ * @ctiinout_sel: register selector for INEN and OUTEN regs.
+ * @ctiinen: enable input trigger to a channel.
+ * @ctiouten: enable output trigger from a channel.
+ * @ctigate: gate channel output from CTI to CTM.
+ * @asicctl: asic control register.
+ */
+struct cti_config {
+	/* hardware description */
+	int nr_ctm_channels;
+	int nr_trig_max;
+
+	/* cti enable control */
+	atomic_t enable_req_count;
+	bool hw_enabled;
+	bool hw_powered;
+
+	/* registered triggers and filtering */
+	u32 trig_in_use;
+	u32 trig_out_use;
+	u32 trig_out_filter;
+	bool trig_filter_enable;
+	u8 xtrig_rchan_sel;
+
+	/* cti cross trig programmable regs */
+	u32 ctiappset;
+	u8 ctiinout_sel;
+	u32 ctiinen[CTIINOUTEN_MAX];
+	u32 ctiouten[CTIINOUTEN_MAX];
+	u32 ctigate;
+	u32 asicctl;
+};
+
+/**
+ * struct cti_drvdata - specifics for the CTI device
+ * @base:	Memory mapped base address for this component..
+ * @csdev:	Standard CoreSight device information.
+ * @ctidev:	Extra information needed by the CTI/CTM framework.
+ * @spinlock:	Control data access to one at a time.
+ * @config:	Configuration data for this CTI device.
+ * @node:	List entry of this device in the list of CTI devices.
+ * @csdev_release: release function for underlying coresight_device.
+ */
+struct cti_drvdata {
+	void __iomem *base;
+	struct coresight_device	*csdev;
+	struct cti_device ctidev;
+	spinlock_t spinlock;
+	struct cti_config config;
+	struct list_head node;
+	void (*csdev_release)(struct device *dev);
+};
+
+/*
+ * Channel operation types.
+ */
+enum cti_chan_op {
+	CTI_CHAN_ATTACH,
+	CTI_CHAN_DETACH,
+};
+
+enum cti_trig_dir {
+	CTI_TRIG_IN,
+	CTI_TRIG_OUT,
+};
+
+enum cti_chan_gate_op {
+	CTI_GATE_CHAN_ENABLE,
+	CTI_GATE_CHAN_DISABLE,
+};
+
+enum cti_chan_set_op {
+	CTI_CHAN_SET,
+	CTI_CHAN_CLR,
+	CTI_CHAN_PULSE,
+};
+
+/* private cti driver fns & vars */
+extern const struct attribute_group *coresight_cti_groups[];
+int cti_add_default_connection(struct device *dev,
+			       struct cti_drvdata *drvdata);
+int cti_add_connection_entry(struct device *dev, struct cti_drvdata *drvdata,
+			     struct cti_trig_con *tc,
+			     struct coresight_device *csdev,
+			     const char *assoc_dev_name);
+struct cti_trig_con *cti_allocate_trig_con(struct device *dev, int in_sigs,
+					   int out_sigs);
+int cti_enable(struct coresight_device *csdev);
+int cti_disable(struct coresight_device *csdev);
+void cti_write_all_hw_regs(struct cti_drvdata *drvdata);
+void cti_write_intack(struct device *dev, u32 ackval);
+void cti_write_single_reg(struct cti_drvdata *drvdata, int offset, u32 value);
+int cti_channel_trig_op(struct device *dev, enum cti_chan_op op,
+			enum cti_trig_dir direction, u32 channel_idx,
+			u32 trigger_idx);
+int cti_channel_gate_op(struct device *dev, enum cti_chan_gate_op op,
+			u32 channel_idx);
+int cti_channel_setop(struct device *dev, enum cti_chan_set_op op,
+		      u32 channel_idx);
+int cti_create_cons_sysfs(struct device *dev, struct cti_drvdata *drvdata);
+struct coresight_platform_data *
+coresight_cti_get_platform_data(struct device *dev);
+const char *cti_plat_get_node_name(struct fwnode_handle *fwnode);
+
+/* cti powered and enabled */
+static inline bool cti_active(struct cti_config *cfg)
+{
+	return cfg->hw_powered && cfg->hw_enabled;
+}
+
+#endif  /* _CORESIGHT_CORESIGHT_CTI_H */
diff --git a/drivers/hwtracing/coresight/coresight-platform.c b/drivers/hwtracing/coresight/coresight-platform.c
index 3c5bee4..43418a2 100644
--- a/drivers/hwtracing/coresight/coresight-platform.c
+++ b/drivers/hwtracing/coresight/coresight-platform.c
@@ -57,6 +57,26 @@ coresight_find_device_by_fwnode(struct fwnode_handle *fwnode)
 	return bus_find_device_by_fwnode(&amba_bustype, fwnode);
 }
 
+/*
+ * Find a registered coresight device from a device fwnode.
+ * The node info is associated with the AMBA parent, but the
+ * csdev keeps a copy so iterate round the coresight bus to
+ * find the device.
+ */
+struct coresight_device *
+coresight_find_csdev_by_fwnode(struct fwnode_handle *r_fwnode)
+{
+	struct device *dev;
+	struct coresight_device *csdev = NULL;
+
+	dev = bus_find_device_by_fwnode(&coresight_bustype, r_fwnode);
+	if (dev) {
+		csdev = to_coresight_device(dev);
+		put_device(dev);
+	}
+	return csdev;
+}
+
 #ifdef CONFIG_OF
 static inline bool of_coresight_legacy_ep_is_input(struct device_node *ep)
 {
diff --git a/drivers/hwtracing/coresight/coresight-priv.h b/drivers/hwtracing/coresight/coresight-priv.h
index 82e563c..890f9a5 100644
--- a/drivers/hwtracing/coresight/coresight-priv.h
+++ b/drivers/hwtracing/coresight/coresight-priv.h
@@ -22,6 +22,7 @@
 #define CORESIGHT_CLAIMCLR	0xfa4
 #define CORESIGHT_LAR		0xfb0
 #define CORESIGHT_LSR		0xfb4
+#define CORESIGHT_DEVARCH	0xfbc
 #define CORESIGHT_AUTHSTATUS	0xfb8
 #define CORESIGHT_DEVID		0xfc8
 #define CORESIGHT_DEVTYPE	0xfcc
@@ -161,6 +162,16 @@ static inline int etm_readl_cp14(u32 off, unsigned int *val) { return 0; }
 static inline int etm_writel_cp14(u32 off, u32 val) { return 0; }
 #endif
 
+#ifdef CONFIG_CORESIGHT_CTI
+extern void cti_add_assoc_to_csdev(struct coresight_device *csdev);
+extern void cti_remove_assoc_from_csdev(struct coresight_device *csdev);
+
+#else
+static inline void cti_add_assoc_to_csdev(struct coresight_device *csdev) {}
+static inline void
+cti_remove_assoc_from_csdev(struct coresight_device *csdev) {}
+#endif
+
 /*
  * Macros and inline functions to handle CoreSight UCI data and driver
  * private data in AMBA ID table entries, and extract data values.
@@ -201,5 +212,9 @@ static inline void *coresight_get_uci_data(const struct amba_id *id)
 }
 
 void coresight_release_platform_data(struct coresight_platform_data *pdata);
+struct coresight_device *
+coresight_find_csdev_by_fwnode(struct fwnode_handle *r_fwnode);
+void coresight_set_assoc_ectdev_mutex(struct coresight_device *csdev,
+				      struct coresight_device *ect_csdev);
 
 #endif
diff --git a/drivers/hwtracing/coresight/coresight.c b/drivers/hwtracing/coresight/coresight.c
index ef20f74..c71553c 100644
--- a/drivers/hwtracing/coresight/coresight.c
+++ b/drivers/hwtracing/coresight/coresight.c
@@ -216,6 +216,44 @@ void coresight_disclaim_device(void __iomem *base)
 	CS_LOCK(base);
 }
 
+/* enable or disable an associated CTI device of the supplied CS device */
+static int
+coresight_control_assoc_ectdev(struct coresight_device *csdev, bool enable)
+{
+	int ect_ret = 0;
+	struct coresight_device *ect_csdev = csdev->ect_dev;
+
+	if (!ect_csdev)
+		return 0;
+
+	if (enable) {
+		if (ect_ops(ect_csdev)->enable)
+			ect_ret = ect_ops(ect_csdev)->enable(ect_csdev);
+	} else {
+		if (ect_ops(ect_csdev)->disable)
+			ect_ret = ect_ops(ect_csdev)->disable(ect_csdev);
+	}
+
+	/* output warning if ECT enable is preventing trace operation */
+	if (ect_ret)
+		dev_info(&csdev->dev, "Associated ECT device (%s) %s failed\n",
+			 dev_name(&ect_csdev->dev),
+			 enable ? "enable" : "disable");
+	return ect_ret;
+}
+
+/*
+ * Set the associated ect / cti device while holding the coresight_mutex
+ * to avoid a race with coresight_enable that may try to use this value.
+ */
+void coresight_set_assoc_ectdev_mutex(struct coresight_device *csdev,
+				      struct coresight_device *ect_csdev)
+{
+	mutex_lock(&coresight_mutex);
+	csdev->ect_dev = ect_csdev;
+	mutex_unlock(&coresight_mutex);
+}
+
 static int coresight_enable_sink(struct coresight_device *csdev,
 				 u32 mode, void *data)
 {
@@ -228,9 +266,14 @@ static int coresight_enable_sink(struct coresight_device *csdev,
 	if (!sink_ops(csdev)->enable)
 		return -EINVAL;
 
-	ret = sink_ops(csdev)->enable(csdev, mode, data);
+	ret = coresight_control_assoc_ectdev(csdev, true);
 	if (ret)
 		return ret;
+	ret = sink_ops(csdev)->enable(csdev, mode, data);
+	if (ret) {
+		coresight_control_assoc_ectdev(csdev, false);
+		return ret;
+	}
 	csdev->enable = true;
 
 	return 0;
@@ -246,6 +289,7 @@ static void coresight_disable_sink(struct coresight_device *csdev)
 	ret = sink_ops(csdev)->disable(csdev);
 	if (ret)
 		return;
+	coresight_control_assoc_ectdev(csdev, false);
 	csdev->enable = false;
 }
 
@@ -269,8 +313,15 @@ static int coresight_enable_link(struct coresight_device *csdev,
 	if (link_subtype == CORESIGHT_DEV_SUBTYPE_LINK_SPLIT && outport < 0)
 		return outport;
 
-	if (link_ops(csdev)->enable)
-		ret = link_ops(csdev)->enable(csdev, inport, outport);
+	if (link_ops(csdev)->enable) {
+		ret = coresight_control_assoc_ectdev(csdev, true);
+		if (!ret) {
+			ret = link_ops(csdev)->enable(csdev, inport, outport);
+			if (ret)
+				coresight_control_assoc_ectdev(csdev, false);
+		}
+	}
+
 	if (!ret)
 		csdev->enable = true;
 
@@ -300,8 +351,10 @@ static void coresight_disable_link(struct coresight_device *csdev,
 		nr_conns = 1;
 	}
 
-	if (link_ops(csdev)->disable)
+	if (link_ops(csdev)->disable) {
 		link_ops(csdev)->disable(csdev, inport, outport);
+		coresight_control_assoc_ectdev(csdev, false);
+	}
 
 	for (i = 0; i < nr_conns; i++)
 		if (atomic_read(&csdev->refcnt[i]) != 0)
@@ -322,9 +375,14 @@ static int coresight_enable_source(struct coresight_device *csdev, u32 mode)
 
 	if (!csdev->enable) {
 		if (source_ops(csdev)->enable) {
-			ret = source_ops(csdev)->enable(csdev, NULL, mode);
+			ret = coresight_control_assoc_ectdev(csdev, true);
 			if (ret)
 				return ret;
+			ret = source_ops(csdev)->enable(csdev, NULL, mode);
+			if (ret) {
+				coresight_control_assoc_ectdev(csdev, false);
+				return ret;
+			};
 		}
 		csdev->enable = true;
 	}
@@ -347,6 +405,7 @@ static bool coresight_disable_source(struct coresight_device *csdev)
 	if (atomic_dec_return(csdev->refcnt) == 0) {
 		if (source_ops(csdev)->disable)
 			source_ops(csdev)->disable(csdev, NULL);
+		coresight_control_assoc_ectdev(csdev, false);
 		csdev->enable = false;
 	}
 	return !csdev->enable;
@@ -955,12 +1014,16 @@ static struct device_type coresight_dev_type[] = {
 	{
 		.name = "helper",
 	},
+	{
+		.name = "ect",
+	},
 };
 
 static void coresight_device_release(struct device *dev)
 {
 	struct coresight_device *csdev = to_coresight_device(dev);
 
+	cti_remove_assoc_from_csdev(csdev);
 	fwnode_handle_put(csdev->dev.fwnode);
 	kfree(csdev->refcnt);
 	kfree(csdev);
@@ -1027,17 +1090,11 @@ static void coresight_fixup_device_conns(struct coresight_device *csdev)
 
 	for (i = 0; i < csdev->pdata->nr_outport; i++) {
 		struct coresight_connection *conn = &csdev->pdata->conns[i];
-		struct device *dev = NULL;
 
-		dev = bus_find_device_by_fwnode(&coresight_bustype, conn->child_fwnode);
-		if (dev) {
-			conn->child_dev = to_coresight_device(dev);
-			/* and put reference from 'bus_find_device()' */
-			put_device(dev);
-		} else {
+		conn->child_dev =
+			coresight_find_csdev_by_fwnode(conn->child_fwnode);
+		if (!conn->child_dev)
 			csdev->orphan = true;
-			conn->child_dev = NULL;
-		}
 	}
 }
 
@@ -1249,6 +1306,7 @@ struct coresight_device *coresight_register(struct coresight_desc *desc)
 
 	coresight_fixup_device_conns(csdev);
 	coresight_fixup_orphan_conns(csdev);
+	cti_add_assoc_to_csdev(csdev);
 
 	mutex_unlock(&coresight_mutex);
 
diff --git a/drivers/hwtracing/intel_th/intel_th.h b/drivers/hwtracing/intel_th/intel_th.h
index 6f4f548..5fe6947 100644
--- a/drivers/hwtracing/intel_th/intel_th.h
+++ b/drivers/hwtracing/intel_th/intel_th.h
@@ -47,11 +47,13 @@ struct intel_th_output {
 /**
  * struct intel_th_drvdata - describes hardware capabilities and quirks
  * @tscu_enable:	device needs SW to enable time stamping unit
+ * @multi_is_broken:	device has multiblock mode is broken
  * @has_mintctl:	device has interrupt control (MINTCTL) register
  * @host_mode_only:	device can only operate in 'host debugger' mode
  */
 struct intel_th_drvdata {
 	unsigned int	tscu_enable        : 1,
+			multi_is_broken    : 1,
 			has_mintctl        : 1,
 			host_mode_only     : 1;
 };
diff --git a/drivers/hwtracing/intel_th/msu.c b/drivers/hwtracing/intel_th/msu.c
index 255f8f4..3a77551 100644
--- a/drivers/hwtracing/intel_th/msu.c
+++ b/drivers/hwtracing/intel_th/msu.c
@@ -138,6 +138,7 @@ struct msc {
 	struct list_head	win_list;
 	struct sg_table		single_sgt;
 	struct msc_window	*cur_win;
+	struct msc_window	*switch_on_unlock;
 	unsigned long		nr_pages;
 	unsigned long		single_sz;
 	unsigned int		single_wrap : 1;
@@ -154,10 +155,13 @@ struct msc {
 
 	struct list_head	iter_list;
 
+	bool			stop_on_full;
+
 	/* config */
 	unsigned int		enabled : 1,
 				wrap	: 1,
-				do_irq	: 1;
+				do_irq	: 1,
+				multi_is_broken : 1;
 	unsigned int		mode;
 	unsigned int		burst_len;
 	unsigned int		index;
@@ -1665,7 +1669,7 @@ static int intel_th_msc_init(struct msc *msc)
 {
 	atomic_set(&msc->user_count, -1);
 
-	msc->mode = MSC_MODE_MULTI;
+	msc->mode = msc->multi_is_broken ? MSC_MODE_SINGLE : MSC_MODE_MULTI;
 	mutex_init(&msc->buf_mutex);
 	INIT_LIST_HEAD(&msc->win_list);
 	INIT_LIST_HEAD(&msc->iter_list);
@@ -1717,6 +1721,10 @@ void intel_th_msc_window_unlock(struct device *dev, struct sg_table *sgt)
 		return;
 
 	msc_win_set_lockout(win, WIN_LOCKED, WIN_READY);
+	if (msc->switch_on_unlock == win) {
+		msc->switch_on_unlock = NULL;
+		msc_win_switch(msc);
+	}
 }
 EXPORT_SYMBOL_GPL(intel_th_msc_window_unlock);
 
@@ -1757,7 +1765,11 @@ static irqreturn_t intel_th_msc_interrupt(struct intel_th_device *thdev)
 
 	/* next window: if READY, proceed, if LOCKED, stop the trace */
 	if (msc_win_set_lockout(next_win, WIN_READY, WIN_INUSE)) {
-		schedule_work(&msc->work);
+		if (msc->stop_on_full)
+			schedule_work(&msc->work);
+		else
+			msc->switch_on_unlock = next_win;
+
 		return IRQ_HANDLED;
 	}
 
@@ -1877,6 +1889,9 @@ mode_store(struct device *dev, struct device_attribute *attr, const char *buf,
 	return -EINVAL;
 
 found:
+	if (i == MSC_MODE_MULTI && msc->multi_is_broken)
+		return -EOPNOTSUPP;
+
 	mutex_lock(&msc->buf_mutex);
 	ret = 0;
 
@@ -2047,11 +2062,36 @@ win_switch_store(struct device *dev, struct device_attribute *attr,
 
 static DEVICE_ATTR_WO(win_switch);
 
+static ssize_t stop_on_full_show(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	struct msc *msc = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%d\n", msc->stop_on_full);
+}
+
+static ssize_t stop_on_full_store(struct device *dev,
+				  struct device_attribute *attr,
+				  const char *buf, size_t size)
+{
+	struct msc *msc = dev_get_drvdata(dev);
+	int ret;
+
+	ret = kstrtobool(buf, &msc->stop_on_full);
+	if (ret)
+		return ret;
+
+	return size;
+}
+
+static DEVICE_ATTR_RW(stop_on_full);
+
 static struct attribute *msc_output_attrs[] = {
 	&dev_attr_wrap.attr,
 	&dev_attr_mode.attr,
 	&dev_attr_nr_pages.attr,
 	&dev_attr_win_switch.attr,
+	&dev_attr_stop_on_full.attr,
 	NULL,
 };
 
@@ -2083,6 +2123,9 @@ static int intel_th_msc_probe(struct intel_th_device *thdev)
 	if (!res)
 		msc->do_irq = 1;
 
+	if (INTEL_TH_CAP(to_intel_th(thdev), multi_is_broken))
+		msc->multi_is_broken = 1;
+
 	msc->index = thdev->id;
 
 	msc->thdev = thdev;
diff --git a/drivers/hwtracing/intel_th/pci.c b/drivers/hwtracing/intel_th/pci.c
index 86aa6a4..7ccac74 100644
--- a/drivers/hwtracing/intel_th/pci.c
+++ b/drivers/hwtracing/intel_th/pci.c
@@ -120,6 +120,10 @@ static void intel_th_pci_remove(struct pci_dev *pdev)
 	pci_free_irq_vectors(pdev);
 }
 
+static const struct intel_th_drvdata intel_th_1x_multi_is_broken = {
+	.multi_is_broken	= 1,
+};
+
 static const struct intel_th_drvdata intel_th_2x = {
 	.tscu_enable	= 1,
 	.has_mintctl	= 1,
@@ -152,7 +156,7 @@ static const struct pci_device_id intel_th_pci_id_table[] = {
 	{
 		/* Kaby Lake PCH-H */
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xa2a6),
-		.driver_data = (kernel_ulong_t)0,
+		.driver_data = (kernel_ulong_t)&intel_th_1x_multi_is_broken,
 	},
 	{
 		/* Denverton */
@@ -207,7 +211,7 @@ static const struct pci_device_id intel_th_pci_id_table[] = {
 	{
 		/* Comet Lake PCH-V */
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xa3a6),
-		.driver_data = (kernel_ulong_t)&intel_th_2x,
+		.driver_data = (kernel_ulong_t)&intel_th_1x_multi_is_broken,
 	},
 	{
 		/* Ice Lake NNPI */
diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index 5ac93f4..dff4e17 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -459,17 +459,17 @@ static int pca_init(struct i2c_adapter *adap)
 		/* To avoid integer overflow, use clock/100 for calculations */
 		clock = pca_clock(pca_data) / 100;
 
-		if (pca_data->i2c_clock > 1000000) {
+		if (pca_data->i2c_clock > I2C_MAX_FAST_MODE_PLUS_FREQ) {
 			mode = I2C_PCA_MODE_TURBO;
 			min_tlow = 14;
 			min_thi  = 5;
 			raise_fall_time = 22; /* Raise 11e-8s, Fall 11e-8s */
-		} else if (pca_data->i2c_clock > 400000) {
+		} else if (pca_data->i2c_clock > I2C_MAX_FAST_MODE_FREQ) {
 			mode = I2C_PCA_MODE_FASTP;
 			min_tlow = 17;
 			min_thi  = 9;
 			raise_fall_time = 22; /* Raise 11e-8s, Fall 11e-8s */
-		} else if (pca_data->i2c_clock > 100000) {
+		} else if (pca_data->i2c_clock > I2C_MAX_STANDARD_MODE_FREQ) {
 			mode = I2C_PCA_MODE_FAST;
 			min_tlow = 44;
 			min_thi  = 20;
diff --git a/drivers/i2c/busses/i2c-altera.c b/drivers/i2c/busses/i2c-altera.c
index 1de23b4..f5c00f9 100644
--- a/drivers/i2c/busses/i2c-altera.c
+++ b/drivers/i2c/busses/i2c-altera.c
@@ -147,7 +147,7 @@ static void altr_i2c_init(struct altr_i2c_dev *idev)
 		  (ALTR_I2C_THRESHOLD << ALTR_I2C_CTRL_TCT_SHFT);
 	u32 t_high, t_low;
 
-	if (idev->bus_clk_rate <= 100000) {
+	if (idev->bus_clk_rate <= I2C_MAX_STANDARD_MODE_FREQ) {
 		tmp &= ~ALTR_I2C_CTRL_BSPEED;
 		/* Standard mode SCL 50/50 */
 		t_high = divisor * 1 / 2;
@@ -384,7 +384,6 @@ static int altr_i2c_probe(struct platform_device *pdev)
 	struct altr_i2c_dev *idev = NULL;
 	struct resource *res;
 	int irq, ret;
-	u32 val;
 
 	idev = devm_kzalloc(&pdev->dev, sizeof(*idev), GFP_KERNEL);
 	if (!idev)
@@ -411,22 +410,22 @@ static int altr_i2c_probe(struct platform_device *pdev)
 	init_completion(&idev->msg_complete);
 	spin_lock_init(&idev->lock);
 
-	val = device_property_read_u32(idev->dev, "fifo-size",
+	ret = device_property_read_u32(idev->dev, "fifo-size",
 				       &idev->fifo_size);
-	if (val) {
+	if (ret) {
 		dev_err(&pdev->dev, "FIFO size set to default of %d\n",
 			ALTR_I2C_DFLT_FIFO_SZ);
 		idev->fifo_size = ALTR_I2C_DFLT_FIFO_SZ;
 	}
 
-	val = device_property_read_u32(idev->dev, "clock-frequency",
+	ret = device_property_read_u32(idev->dev, "clock-frequency",
 				       &idev->bus_clk_rate);
-	if (val) {
+	if (ret) {
 		dev_err(&pdev->dev, "Default to 100kHz\n");
-		idev->bus_clk_rate = 100000;	/* default clock rate */
+		idev->bus_clk_rate = I2C_MAX_STANDARD_MODE_FREQ;	/* default clock rate */
 	}
 
-	if (idev->bus_clk_rate > 400000) {
+	if (idev->bus_clk_rate > I2C_MAX_FAST_MODE_FREQ) {
 		dev_err(&pdev->dev, "invalid clock-frequency %d\n",
 			idev->bus_clk_rate);
 		return -EINVAL;
diff --git a/drivers/i2c/busses/i2c-amd-mp2-plat.c b/drivers/i2c/busses/i2c-amd-mp2-plat.c
index f5b3f00c..17df9e8 100644
--- a/drivers/i2c/busses/i2c-amd-mp2-plat.c
+++ b/drivers/i2c/busses/i2c-amd-mp2-plat.c
@@ -201,32 +201,37 @@ static int i2c_amd_resume(struct amd_i2c_common *i2c_common)
 }
 #endif
 
+static const u32 supported_speeds[] = {
+	I2C_MAX_HIGH_SPEED_MODE_FREQ,
+	I2C_MAX_TURBO_MODE_FREQ,
+	I2C_MAX_FAST_MODE_PLUS_FREQ,
+	I2C_MAX_FAST_MODE_FREQ,
+	I2C_MAX_STANDARD_MODE_FREQ,
+};
+
 static enum speed_enum i2c_amd_get_bus_speed(struct platform_device *pdev)
 {
 	u32 acpi_speed;
 	int i;
-	static const u32 supported_speeds[] = {
-		0, 100000, 400000, 1000000, 1400000, 3400000
-	};
 
 	acpi_speed = i2c_acpi_find_bus_speed(&pdev->dev);
 	/* round down to the lowest standard speed */
-	for (i = 1; i < ARRAY_SIZE(supported_speeds); i++) {
-		if (acpi_speed < supported_speeds[i])
+	for (i = 0; i < ARRAY_SIZE(supported_speeds); i++) {
+		if (acpi_speed >= supported_speeds[i])
 			break;
 	}
-	acpi_speed = supported_speeds[i - 1];
+	acpi_speed = i < ARRAY_SIZE(supported_speeds) ? supported_speeds[i] : 0;
 
 	switch (acpi_speed) {
-	case 100000:
+	case I2C_MAX_STANDARD_MODE_FREQ:
 		return speed100k;
-	case 400000:
+	case I2C_MAX_FAST_MODE_FREQ:
 		return speed400k;
-	case 1000000:
+	case I2C_MAX_FAST_MODE_PLUS_FREQ:
 		return speed1000k;
-	case 1400000:
+	case I2C_MAX_TURBO_MODE_FREQ:
 		return speed1400k;
-	case 3400000:
+	case I2C_MAX_HIGH_SPEED_MODE_FREQ:
 		return speed3400k;
 	default:
 		return speed400k;
diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
index a7be6f2..07c1993 100644
--- a/drivers/i2c/busses/i2c-aspeed.c
+++ b/drivers/i2c/busses/i2c-aspeed.c
@@ -997,7 +997,7 @@ static int aspeed_i2c_probe_bus(struct platform_device *pdev)
 	if (ret < 0) {
 		dev_err(&pdev->dev,
 			"Could not read bus-frequency property\n");
-		bus->bus_frequency = 100000;
+		bus->bus_frequency = I2C_MAX_STANDARD_MODE_FREQ;
 	}
 
 	match = of_match_node(aspeed_i2c_bus_of_table, pdev->dev.of_node);
diff --git a/drivers/i2c/busses/i2c-at91-master.c b/drivers/i2c/busses/i2c-at91-master.c
index 7a862e0..0aba51a 100644
--- a/drivers/i2c/busses/i2c-at91-master.c
+++ b/drivers/i2c/busses/i2c-at91-master.c
@@ -18,11 +18,13 @@
 #include <linux/dma-mapping.h>
 #include <linux/dmaengine.h>
 #include <linux/err.h>
+#include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/pinctrl/consumer.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/dma-atmel.h>
 #include <linux/pm_runtime.h>
@@ -478,6 +480,7 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev)
 	unsigned long time_left;
 	bool has_unre_flag = dev->pdata->has_unre_flag;
 	bool has_alt_cmd = dev->pdata->has_alt_cmd;
+	struct i2c_bus_recovery_info *rinfo = &dev->rinfo;
 
 	/*
 	 * WARNING: the TXCOMP bit in the Status Register is NOT a clear on
@@ -637,6 +640,13 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev)
 		at91_twi_write(dev, AT91_TWI_CR,
 			       AT91_TWI_THRCLR | AT91_TWI_LOCKCLR);
 	}
+
+	if (rinfo->get_sda && !(rinfo->get_sda(&dev->adapter))) {
+		dev_dbg(dev->dev,
+			"SDA is down; clear bus using gpio\n");
+		i2c_recover_bus(&dev->adapter);
+	}
+
 	return ret;
 }
 
@@ -806,6 +816,70 @@ static int at91_twi_configure_dma(struct at91_twi_dev *dev, u32 phy_addr)
 	return ret;
 }
 
+static void at91_prepare_twi_recovery(struct i2c_adapter *adap)
+{
+	struct at91_twi_dev *dev = i2c_get_adapdata(adap);
+
+	pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_gpio);
+}
+
+static void at91_unprepare_twi_recovery(struct i2c_adapter *adap)
+{
+	struct at91_twi_dev *dev = i2c_get_adapdata(adap);
+
+	pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_default);
+}
+
+static int at91_init_twi_recovery_info(struct platform_device *pdev,
+				       struct at91_twi_dev *dev)
+{
+	struct i2c_bus_recovery_info *rinfo = &dev->rinfo;
+
+	dev->pinctrl = devm_pinctrl_get(&pdev->dev);
+	if (!dev->pinctrl || IS_ERR(dev->pinctrl)) {
+		dev_info(dev->dev, "can't get pinctrl, bus recovery not supported\n");
+		return PTR_ERR(dev->pinctrl);
+	}
+
+	dev->pinctrl_pins_default = pinctrl_lookup_state(dev->pinctrl,
+							 PINCTRL_STATE_DEFAULT);
+	dev->pinctrl_pins_gpio = pinctrl_lookup_state(dev->pinctrl,
+						      "gpio");
+	rinfo->sda_gpiod = devm_gpiod_get(&pdev->dev, "sda", GPIOD_IN);
+	if (PTR_ERR(rinfo->sda_gpiod) == -EPROBE_DEFER)
+		return -EPROBE_DEFER;
+
+	rinfo->scl_gpiod = devm_gpiod_get(&pdev->dev, "scl",
+					  GPIOD_OUT_HIGH_OPEN_DRAIN);
+	if (PTR_ERR(rinfo->scl_gpiod) == -EPROBE_DEFER)
+		return -EPROBE_DEFER;
+
+	if (IS_ERR(rinfo->sda_gpiod) ||
+	    IS_ERR(rinfo->scl_gpiod) ||
+	    IS_ERR(dev->pinctrl_pins_default) ||
+	    IS_ERR(dev->pinctrl_pins_gpio)) {
+		dev_info(&pdev->dev, "recovery information incomplete\n");
+		if (!IS_ERR(rinfo->sda_gpiod)) {
+			gpiod_put(rinfo->sda_gpiod);
+			rinfo->sda_gpiod = NULL;
+		}
+		if (!IS_ERR(rinfo->scl_gpiod)) {
+			gpiod_put(rinfo->scl_gpiod);
+			rinfo->scl_gpiod = NULL;
+		}
+		return -EINVAL;
+	}
+
+	dev_info(&pdev->dev, "using scl, sda for recovery\n");
+
+	rinfo->prepare_recovery = at91_prepare_twi_recovery;
+	rinfo->unprepare_recovery = at91_unprepare_twi_recovery;
+	rinfo->recover_bus = i2c_generic_scl_recovery;
+	dev->adapter.bus_recovery_info = rinfo;
+
+	return 0;
+}
+
 int at91_twi_probe_master(struct platform_device *pdev,
 			  u32 phy_addr, struct at91_twi_dev *dev)
 {
@@ -838,6 +912,10 @@ int at91_twi_probe_master(struct platform_device *pdev,
 						     "i2c-analog-filter");
 	at91_calc_twi_clock(dev);
 
+	rc = at91_init_twi_recovery_info(pdev, dev);
+	if (rc == -EPROBE_DEFER)
+		return rc;
+
 	dev->adapter.algo = &at91_twi_algorithm;
 	dev->adapter.quirks = &at91_twi_quirks;
 
diff --git a/drivers/i2c/busses/i2c-at91.h b/drivers/i2c/busses/i2c-at91.h
index 977a67b..f57a6ca 100644
--- a/drivers/i2c/busses/i2c-at91.h
+++ b/drivers/i2c/busses/i2c-at91.h
@@ -151,6 +151,10 @@ struct at91_twi_dev {
 	u32 fifo_size;
 	struct at91_twi_dma dma;
 	bool slave_detected;
+	struct i2c_bus_recovery_info rinfo;
+	struct pinctrl *pinctrl;
+	struct pinctrl_state *pinctrl_pins_default;
+	struct pinctrl_state *pinctrl_pins_gpio;
 #ifdef CONFIG_I2C_AT91_SLAVE_EXPERIMENTAL
 	unsigned smr;
 	struct i2c_client *slave;
diff --git a/drivers/i2c/busses/i2c-axxia.c b/drivers/i2c/busses/i2c-axxia.c
index 0214daa..be3681d 100644
--- a/drivers/i2c/busses/i2c-axxia.c
+++ b/drivers/i2c/busses/i2c-axxia.c
@@ -199,7 +199,7 @@ static int axxia_i2c_init(struct axxia_i2c_dev *idev)
 	/* Enable Master Mode */
 	writel(0x1, idev->base + GLOBAL_CONTROL);
 
-	if (idev->bus_clk_rate <= 100000) {
+	if (idev->bus_clk_rate <= I2C_MAX_STANDARD_MODE_FREQ) {
 		/* Standard mode SCL 50/50, tSU:DAT = 250 ns */
 		t_high = divisor * 1 / 2;
 		t_low = divisor * 1 / 2;
@@ -765,7 +765,7 @@ static int axxia_i2c_probe(struct platform_device *pdev)
 
 	of_property_read_u32(np, "clock-frequency", &idev->bus_clk_rate);
 	if (idev->bus_clk_rate == 0)
-		idev->bus_clk_rate = 100000;	/* default clock rate */
+		idev->bus_clk_rate = I2C_MAX_STANDARD_MODE_FREQ;	/* default clock rate */
 
 	ret = clk_prepare_enable(idev->i2c_clk);
 	if (ret) {
diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c
index 30efb79..44be092 100644
--- a/drivers/i2c/busses/i2c-bcm-iproc.c
+++ b/drivers/i2c/busses/i2c-bcm-iproc.c
@@ -858,25 +858,25 @@ static int bcm_iproc_i2c_cfg_speed(struct bcm_iproc_i2c_dev *iproc_i2c)
 	if (ret < 0) {
 		dev_info(iproc_i2c->device,
 			"unable to interpret clock-frequency DT property\n");
-		bus_speed = 100000;
+		bus_speed = I2C_MAX_STANDARD_MODE_FREQ;
 	}
 
-	if (bus_speed < 100000) {
+	if (bus_speed < I2C_MAX_STANDARD_MODE_FREQ) {
 		dev_err(iproc_i2c->device, "%d Hz bus speed not supported\n",
 			bus_speed);
 		dev_err(iproc_i2c->device,
 			"valid speeds are 100khz and 400khz\n");
 		return -EINVAL;
-	} else if (bus_speed < 400000) {
-		bus_speed = 100000;
+	} else if (bus_speed < I2C_MAX_FAST_MODE_FREQ) {
+		bus_speed = I2C_MAX_STANDARD_MODE_FREQ;
 	} else {
-		bus_speed = 400000;
+		bus_speed = I2C_MAX_FAST_MODE_FREQ;
 	}
 
 	iproc_i2c->bus_speed = bus_speed;
 	val = iproc_i2c_rd_reg(iproc_i2c, TIM_CFG_OFFSET);
 	val &= ~BIT(TIM_CFG_MODE_400_SHIFT);
-	val |= (bus_speed == 400000) << TIM_CFG_MODE_400_SHIFT;
+	val |= (bus_speed == I2C_MAX_FAST_MODE_FREQ) << TIM_CFG_MODE_400_SHIFT;
 	iproc_i2c_wr_reg(iproc_i2c, TIM_CFG_OFFSET, val);
 
 	dev_info(iproc_i2c->device, "bus set to %u Hz\n", bus_speed);
@@ -1029,7 +1029,7 @@ static int bcm_iproc_i2c_resume(struct device *dev)
 	/* configure to the desired bus speed */
 	val = iproc_i2c_rd_reg(iproc_i2c, TIM_CFG_OFFSET);
 	val &= ~BIT(TIM_CFG_MODE_400_SHIFT);
-	val |= (iproc_i2c->bus_speed == 400000) << TIM_CFG_MODE_400_SHIFT;
+	val |= (iproc_i2c->bus_speed == I2C_MAX_FAST_MODE_FREQ) << TIM_CFG_MODE_400_SHIFT;
 	iproc_i2c_wr_reg(iproc_i2c, TIM_CFG_OFFSET, val);
 
 	bcm_iproc_i2c_enable_disable(iproc_i2c, true);
diff --git a/drivers/i2c/busses/i2c-bcm-kona.c b/drivers/i2c/busses/i2c-bcm-kona.c
index 4e489a9d..572aebb 100644
--- a/drivers/i2c/busses/i2c-bcm-kona.c
+++ b/drivers/i2c/busses/i2c-bcm-kona.c
@@ -722,16 +722,16 @@ static int bcm_kona_i2c_assign_bus_speed(struct bcm_kona_i2c_dev *dev)
 	}
 
 	switch (bus_speed) {
-	case 100000:
+	case I2C_MAX_STANDARD_MODE_FREQ:
 		dev->std_cfg = &std_cfg_table[BCM_SPD_100K];
 		break;
-	case 400000:
+	case I2C_MAX_FAST_MODE_FREQ:
 		dev->std_cfg = &std_cfg_table[BCM_SPD_400K];
 		break;
-	case 1000000:
+	case I2C_MAX_FAST_MODE_PLUS_FREQ:
 		dev->std_cfg = &std_cfg_table[BCM_SPD_1MHZ];
 		break;
-	case 3400000:
+	case I2C_MAX_HIGH_SPEED_MODE_FREQ:
 		/* Send mastercode at 100k */
 		dev->std_cfg = &std_cfg_table[BCM_SPD_100K];
 		dev->hs_cfg = &hs_cfg_table[BCM_SPD_3P4MHZ];
diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c
index 5ab901a..d9b86fc 100644
--- a/drivers/i2c/busses/i2c-bcm2835.c
+++ b/drivers/i2c/busses/i2c-bcm2835.c
@@ -439,7 +439,7 @@ static int bcm2835_i2c_probe(struct platform_device *pdev)
 	if (ret < 0) {
 		dev_warn(&pdev->dev,
 			 "Could not read clock-frequency property\n");
-		bus_clk_rate = 100000;
+		bus_clk_rate = I2C_MAX_STANDARD_MODE_FREQ;
 	}
 
 	ret = clk_set_rate_exclusive(i2c_dev->bus_clk, bus_clk_rate);
diff --git a/drivers/i2c/busses/i2c-brcmstb.c b/drivers/i2c/busses/i2c-brcmstb.c
index 5069915..169a283 100644
--- a/drivers/i2c/busses/i2c-brcmstb.c
+++ b/drivers/i2c/busses/i2c-brcmstb.c
@@ -580,6 +580,31 @@ static void brcmstb_i2c_set_bsc_reg_defaults(struct brcmstb_i2c_dev *dev)
 	brcmstb_i2c_set_bus_speed(dev);
 }
 
+#define AUTOI2C_CTRL0		0x26c
+#define AUTOI2C_CTRL0_RELEASE_BSC	BIT(1)
+
+static int bcm2711_release_bsc(struct brcmstb_i2c_dev *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev->device);
+	struct resource *iomem;
+	void __iomem *autoi2c;
+
+	/* Map hardware registers */
+	iomem = platform_get_resource_byname(pdev, IORESOURCE_MEM, "auto-i2c");
+	autoi2c = devm_ioremap_resource(&pdev->dev, iomem);
+	if (IS_ERR(autoi2c))
+		return PTR_ERR(autoi2c);
+
+	writel(AUTOI2C_CTRL0_RELEASE_BSC, autoi2c + AUTOI2C_CTRL0);
+	devm_iounmap(&pdev->dev, autoi2c);
+
+	/* We need to reset the controller after the release */
+	dev->bsc_regmap->iic_enable = 0;
+	bsc_writel(dev, dev->bsc_regmap->iic_enable, iic_enable);
+
+	return 0;
+}
+
 static int brcmstb_i2c_probe(struct platform_device *pdev)
 {
 	int rc = 0;
@@ -609,6 +634,13 @@ static int brcmstb_i2c_probe(struct platform_device *pdev)
 		goto probe_errorout;
 	}
 
+	if (of_device_is_compatible(dev->device->of_node,
+				    "brcm,bcm2711-hdmi-i2c")) {
+		rc = bcm2711_release_bsc(dev);
+		if (rc)
+			goto probe_errorout;
+	}
+
 	rc = of_property_read_string(dev->device->of_node, "interrupt-names",
 				     &int_name);
 	if (rc < 0)
@@ -705,6 +737,7 @@ static SIMPLE_DEV_PM_OPS(brcmstb_i2c_pm, brcmstb_i2c_suspend,
 static const struct of_device_id brcmstb_i2c_of_match[] = {
 	{.compatible = "brcm,brcmstb-i2c"},
 	{.compatible = "brcm,brcmper-i2c"},
+	{.compatible = "brcm,bcm2711-hdmi-i2c"},
 	{},
 };
 MODULE_DEVICE_TABLE(of, brcmstb_i2c_of_match);
diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c
index 1105aee..89d58f7 100644
--- a/drivers/i2c/busses/i2c-cadence.c
+++ b/drivers/i2c/busses/i2c-cadence.c
@@ -104,9 +104,6 @@
 
 #define DRIVER_NAME		"cdns-i2c"
 
-#define CDNS_I2C_SPEED_MAX	400000
-#define CDNS_I2C_SPEED_DEFAULT	100000
-
 #define CDNS_I2C_DIVA_MAX	4
 #define CDNS_I2C_DIVB_MAX	64
 
@@ -949,8 +946,8 @@ static int cdns_i2c_probe(struct platform_device *pdev)
 
 	ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency",
 			&id->i2c_clk);
-	if (ret || (id->i2c_clk > CDNS_I2C_SPEED_MAX))
-		id->i2c_clk = CDNS_I2C_SPEED_DEFAULT;
+	if (ret || (id->i2c_clk > I2C_MAX_FAST_MODE_FREQ))
+		id->i2c_clk = I2C_MAX_STANDARD_MODE_FREQ;
 
 	cdns_i2c_writereg(CDNS_I2C_CR_ACK_EN | CDNS_I2C_CR_NEA | CDNS_I2C_CR_MS,
 			  CDNS_I2C_CR_OFFSET);
diff --git a/drivers/i2c/busses/i2c-designware-baytrail.c b/drivers/i2c/busses/i2c-designware-baytrail.c
index 33da07d..c6a7a00 100644
--- a/drivers/i2c/busses/i2c-designware-baytrail.c
+++ b/drivers/i2c/busses/i2c-designware-baytrail.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Intel BayTrail PMIC I2C bus semaphore implementaion
+ * Intel BayTrail PMIC I2C bus semaphore implementation
  * Copyright (c) 2014, Intel Corporation.
  */
 #include <linux/device.h>
diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c
index 2de7452..c70c6fc 100644
--- a/drivers/i2c/busses/i2c-designware-common.c
+++ b/drivers/i2c/busses/i2c-designware-common.c
@@ -102,7 +102,7 @@ int i2c_dw_set_reg_access(struct dw_i2c_dev *dev)
 	i2c_dw_release_lock(dev);
 
 	if (reg == swab32(DW_IC_COMP_TYPE_VALUE)) {
-		/* Configure register endianess access */
+		/* Configure register endianness access */
 		dev->flags |= ACCESS_SWAP;
 	} else if (reg == (DW_IC_COMP_TYPE_VALUE & 0x0000ffff)) {
 		/* Configure register access mode 16bit */
@@ -190,10 +190,10 @@ int i2c_dw_set_sda_hold(struct dw_i2c_dev *dev)
 
 		/*
 		 * Workaround for avoiding TX arbitration lost in case I2C
-		 * slave pulls SDA down "too quickly" after falling egde of
+		 * slave pulls SDA down "too quickly" after falling edge of
 		 * SCL by enabling non-zero SDA RX hold. Specification says it
 		 * extends incoming SDA low to high transition while SCL is
-		 * high but it apprears to help also above issue.
+		 * high but it appears to help also above issue.
 		 */
 		if (!(dev->sda_hold_time & DW_IC_SDA_HOLD_RX_MASK))
 			dev->sda_hold_time |= 1 << DW_IC_SDA_HOLD_RX_SHIFT;
@@ -344,6 +344,28 @@ int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev)
 		return -EIO;
 }
 
+void i2c_dw_set_fifo_size(struct dw_i2c_dev *dev)
+{
+	u32 param, tx_fifo_depth, rx_fifo_depth;
+
+	/*
+	 * Try to detect the FIFO depth if not set by interface driver,
+	 * the depth could be from 2 to 256 from HW spec.
+	 */
+	param = dw_readl(dev, DW_IC_COMP_PARAM_1);
+	tx_fifo_depth = ((param >> 16) & 0xff) + 1;
+	rx_fifo_depth = ((param >> 8)  & 0xff) + 1;
+	if (!dev->tx_fifo_depth) {
+		dev->tx_fifo_depth = tx_fifo_depth;
+		dev->rx_fifo_depth = rx_fifo_depth;
+	} else if (tx_fifo_depth >= 2) {
+		dev->tx_fifo_depth = min_t(u32, dev->tx_fifo_depth,
+				tx_fifo_depth);
+		dev->rx_fifo_depth = min_t(u32, dev->rx_fifo_depth,
+				rx_fifo_depth);
+	}
+}
+
 u32 i2c_dw_func(struct i2c_adapter *adap)
 {
 	struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
@@ -356,7 +378,7 @@ void i2c_dw_disable(struct dw_i2c_dev *dev)
 	/* Disable controller */
 	__i2c_dw_disable(dev);
 
-	/* Disable all interupts */
+	/* Disable all interrupts */
 	dw_writel(dev, 0, DW_IC_INTR_MASK);
 	dw_readl(dev, DW_IC_CLR_INTR);
 }
@@ -366,11 +388,5 @@ void i2c_dw_disable_int(struct dw_i2c_dev *dev)
 	dw_writel(dev, 0, DW_IC_INTR_MASK);
 }
 
-u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev)
-{
-	return dw_readl(dev, DW_IC_COMP_PARAM_1);
-}
-EXPORT_SYMBOL_GPL(i2c_dw_read_comp_param);
-
 MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter core");
 MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index 67edbbd..b220ad6 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -297,6 +297,7 @@ int i2c_dw_acquire_lock(struct dw_i2c_dev *dev);
 void i2c_dw_release_lock(struct dw_i2c_dev *dev);
 int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev);
 int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev);
+void i2c_dw_set_fifo_size(struct dw_i2c_dev *dev);
 u32 i2c_dw_func(struct i2c_adapter *adap);
 void i2c_dw_disable(struct dw_i2c_dev *dev);
 void i2c_dw_disable_int(struct dw_i2c_dev *dev);
@@ -313,7 +314,6 @@ static inline void __i2c_dw_disable_nowait(struct dw_i2c_dev *dev)
 
 void __i2c_dw_disable(struct dw_i2c_dev *dev);
 
-extern u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev);
 extern int i2c_dw_probe(struct dw_i2c_dev *dev);
 #if IS_ENABLED(CONFIG_I2C_DESIGNWARE_SLAVE)
 extern int i2c_dw_probe_slave(struct dw_i2c_dev *dev);
diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c
index e8b3282..3a58eef2 100644
--- a/drivers/i2c/busses/i2c-designware-master.c
+++ b/drivers/i2c/busses/i2c-designware-master.c
@@ -521,7 +521,7 @@ static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev)
 
 	/*
 	 * The IC_INTR_STAT register just indicates "enabled" interrupts.
-	 * Ths unmasked raw version of interrupt status bits are available
+	 * The unmasked raw version of interrupt status bits is available
 	 * in the IC_RAW_INTR_STAT register.
 	 *
 	 * That is,
@@ -698,6 +698,8 @@ int i2c_dw_probe(struct dw_i2c_dev *dev)
 	if (ret)
 		return ret;
 
+	i2c_dw_set_fifo_size(dev);
+
 	ret = dev->init(dev);
 	if (ret)
 		return ret;
diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index 05b35ac..7a0b65b 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -109,7 +109,7 @@ static int mfld_setup(struct pci_dev *pdev, struct dw_pci_controller *c)
 static int mrfld_setup(struct pci_dev *pdev, struct dw_pci_controller *c)
 {
 	/*
-	 * On Intel Merrifield the user visible i2c busses are enumerated
+	 * On Intel Merrifield the user visible i2c buses are enumerated
 	 * [1..7]. So, we add 1 to shift the default range. Besides that the
 	 * first PCI slot provides 4 functions, that's why we have to add 0 to
 	 * the first slot and 4 to the next one.
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 3b7d58c..5536673 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -99,16 +99,16 @@ static int dw_i2c_acpi_configure(struct platform_device *pdev)
 	dw_i2c_acpi_params(pdev, "FMCN", &dev->fs_hcnt, &dev->fs_lcnt, &fs_ht);
 
 	switch (t->bus_freq_hz) {
-	case 100000:
+	case I2C_MAX_STANDARD_MODE_FREQ:
 		dev->sda_hold_time = ss_ht;
 		break;
-	case 1000000:
+	case I2C_MAX_FAST_MODE_PLUS_FREQ:
 		dev->sda_hold_time = fp_ht;
 		break;
-	case 3400000:
+	case I2C_MAX_HIGH_SPEED_MODE_FREQ:
 		dev->sda_hold_time = hs_ht;
 		break;
-	case 400000:
+	case I2C_MAX_FAST_MODE_FREQ:
 	default:
 		dev->sda_hold_time = fs_ht;
 		break;
@@ -198,10 +198,10 @@ static void i2c_dw_configure_master(struct dw_i2c_dev *dev)
 	dev->mode = DW_IC_MASTER;
 
 	switch (t->bus_freq_hz) {
-	case 100000:
+	case I2C_MAX_STANDARD_MODE_FREQ:
 		dev->master_cfg |= DW_IC_CON_SPEED_STD;
 		break;
-	case 3400000:
+	case I2C_MAX_HIGH_SPEED_MODE_FREQ:
 		dev->master_cfg |= DW_IC_CON_SPEED_HIGH;
 		break;
 	default:
@@ -219,28 +219,6 @@ static void i2c_dw_configure_slave(struct dw_i2c_dev *dev)
 	dev->mode = DW_IC_SLAVE;
 }
 
-static void dw_i2c_set_fifo_size(struct dw_i2c_dev *dev)
-{
-	u32 param, tx_fifo_depth, rx_fifo_depth;
-
-	/*
-	 * Try to detect the FIFO depth if not set by interface driver,
-	 * the depth could be from 2 to 256 from HW spec.
-	 */
-	param = i2c_dw_read_comp_param(dev);
-	tx_fifo_depth = ((param >> 16) & 0xff) + 1;
-	rx_fifo_depth = ((param >> 8)  & 0xff) + 1;
-	if (!dev->tx_fifo_depth) {
-		dev->tx_fifo_depth = tx_fifo_depth;
-		dev->rx_fifo_depth = rx_fifo_depth;
-	} else if (tx_fifo_depth >= 2) {
-		dev->tx_fifo_depth = min_t(u32, dev->tx_fifo_depth,
-				tx_fifo_depth);
-		dev->rx_fifo_depth = min_t(u32, dev->rx_fifo_depth,
-				rx_fifo_depth);
-	}
-}
-
 static void dw_i2c_plat_pm_cleanup(struct dw_i2c_dev *dev)
 {
 	pm_runtime_disable(dev->dev);
@@ -249,6 +227,13 @@ static void dw_i2c_plat_pm_cleanup(struct dw_i2c_dev *dev)
 		pm_runtime_put_noidle(dev->dev);
 }
 
+static const u32 supported_speeds[] = {
+	I2C_MAX_HIGH_SPEED_MODE_FREQ,
+	I2C_MAX_FAST_MODE_PLUS_FREQ,
+	I2C_MAX_FAST_MODE_FREQ,
+	I2C_MAX_STANDARD_MODE_FREQ,
+};
+
 static int dw_i2c_plat_probe(struct platform_device *pdev)
 {
 	struct dw_i2c_platform_data *pdata = dev_get_platdata(&pdev->dev);
@@ -258,9 +243,6 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 	u32 acpi_speed;
 	struct resource *mem;
 	int i, irq, ret;
-	static const int supported_speeds[] = {
-		0, 100000, 400000, 1000000, 3400000
-	};
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
@@ -296,11 +278,11 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 	 * Some DSTDs use a non standard speed, round down to the lowest
 	 * standard speed.
 	 */
-	for (i = 1; i < ARRAY_SIZE(supported_speeds); i++) {
-		if (acpi_speed < supported_speeds[i])
+	for (i = 0; i < ARRAY_SIZE(supported_speeds); i++) {
+		if (acpi_speed >= supported_speeds[i])
 			break;
 	}
-	acpi_speed = supported_speeds[i - 1];
+	acpi_speed = i < ARRAY_SIZE(supported_speeds) ? supported_speeds[i] : 0;
 
 	/*
 	 * Find bus speed from the "clock-frequency" device property, ACPI
@@ -311,7 +293,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 	else if (acpi_speed || t->bus_freq_hz)
 		t->bus_freq_hz = max(t->bus_freq_hz, acpi_speed);
 	else
-		t->bus_freq_hz = 400000;
+		t->bus_freq_hz = I2C_MAX_FAST_MODE_FREQ;
 
 	dev->flags |= (uintptr_t)device_get_match_data(&pdev->dev);
 
@@ -325,8 +307,11 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 	 * Only standard mode at 100kHz, fast mode at 400kHz,
 	 * fast mode plus at 1MHz and high speed mode at 3.4MHz are supported.
 	 */
-	if (t->bus_freq_hz != 100000 && t->bus_freq_hz != 400000 &&
-	    t->bus_freq_hz != 1000000 && t->bus_freq_hz != 3400000) {
+	for (i = 0; i < ARRAY_SIZE(supported_speeds); i++) {
+		if (t->bus_freq_hz == supported_speeds[i])
+			break;
+	}
+	if (i == ARRAY_SIZE(supported_speeds)) {
 		dev_err(&pdev->dev,
 			"%d Hz is unsupported, only 100kHz, 400kHz, 1MHz and 3.4MHz are supported\n",
 			t->bus_freq_hz);
@@ -362,8 +347,6 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 				div_u64(clk_khz * t->sda_hold_ns + 500000, 1000000);
 	}
 
-	dw_i2c_set_fifo_size(dev);
-
 	adap = &dev->adapter;
 	adap->owner = THIS_MODULE;
 	adap->class = I2C_CLASS_DEPRECATED;
@@ -371,10 +354,16 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 	adap->dev.of_node = pdev->dev.of_node;
 	adap->nr = -1;
 
-	dev_pm_set_driver_flags(&pdev->dev,
-				DPM_FLAG_SMART_PREPARE |
-				DPM_FLAG_SMART_SUSPEND |
-				DPM_FLAG_LEAVE_SUSPENDED);
+	if (dev->flags & ACCESS_NO_IRQ_SUSPEND) {
+		dev_pm_set_driver_flags(&pdev->dev,
+					DPM_FLAG_SMART_PREPARE |
+					DPM_FLAG_LEAVE_SUSPENDED);
+	} else {
+		dev_pm_set_driver_flags(&pdev->dev,
+					DPM_FLAG_SMART_PREPARE |
+					DPM_FLAG_SMART_SUSPEND |
+					DPM_FLAG_LEAVE_SUSPENDED);
+	}
 
 	/* The code below assumes runtime PM to be disabled. */
 	WARN_ON(pm_runtime_enabled(&pdev->dev));
diff --git a/drivers/i2c/busses/i2c-designware-slave.c b/drivers/i2c/busses/i2c-designware-slave.c
index f5f0017..f5ecf76 100644
--- a/drivers/i2c/busses/i2c-designware-slave.c
+++ b/drivers/i2c/busses/i2c-designware-slave.c
@@ -107,7 +107,7 @@ static u32 i2c_dw_read_clear_intrbits_slave(struct dw_i2c_dev *dev)
 
 	/*
 	 * The IC_INTR_STAT register just indicates "enabled" interrupts.
-	 * Ths unmasked raw version of interrupt status bits are available
+	 * The unmasked raw version of interrupt status bits is available
 	 * in the IC_RAW_INTR_STAT register.
 	 *
 	 * That is,
@@ -260,6 +260,8 @@ int i2c_dw_probe_slave(struct dw_i2c_dev *dev)
 	if (ret)
 		return ret;
 
+	i2c_dw_set_fifo_size(dev);
+
 	ret = dev->init(dev);
 	if (ret)
 		return ret;
diff --git a/drivers/i2c/busses/i2c-digicolor.c b/drivers/i2c/busses/i2c-digicolor.c
index 3adf725..056a5c4 100644
--- a/drivers/i2c/busses/i2c-digicolor.c
+++ b/drivers/i2c/busses/i2c-digicolor.c
@@ -18,7 +18,6 @@
 #include <linux/of.h>
 #include <linux/platform_device.h>
 
-#define DEFAULT_FREQ		100000
 #define TIMEOUT_MS		100
 
 #define II_CONTROL		0x0
@@ -300,7 +299,7 @@ static int dc_i2c_probe(struct platform_device *pdev)
 
 	if (of_property_read_u32(pdev->dev.of_node, "clock-frequency",
 				 &i2c->frequency))
-		i2c->frequency = DEFAULT_FREQ;
+		i2c->frequency = I2C_MAX_STANDARD_MODE_FREQ;
 
 	i2c->dev = &pdev->dev;
 	platform_set_drvdata(pdev, i2c);
diff --git a/drivers/i2c/busses/i2c-diolan-u2c.c b/drivers/i2c/busses/i2c-diolan-u2c.c
index 382f105..b48b788 100644
--- a/drivers/i2c/busses/i2c-diolan-u2c.c
+++ b/drivers/i2c/busses/i2c-diolan-u2c.c
@@ -64,8 +64,6 @@
 #define U2C_I2C_SPEED_2KHZ	242	/* 2 kHz, minimum speed */
 #define U2C_I2C_SPEED(f)	((DIV_ROUND_UP(1000000, (f)) - 10) / 2 + 1)
 
-#define U2C_I2C_FREQ_FAST	400000
-#define U2C_I2C_FREQ_STD	100000
 #define U2C_I2C_FREQ(s)		(1000000 / (2 * (s - 1) + 10))
 
 #define DIOLAN_USB_TIMEOUT	100	/* in ms */
@@ -87,7 +85,7 @@ struct i2c_diolan_u2c {
 	int ocount;			/* Number of enqueued messages */
 };
 
-static uint frequency = U2C_I2C_FREQ_STD;	/* I2C clock frequency in Hz */
+static uint frequency = I2C_MAX_STANDARD_MODE_FREQ;	/* I2C clock frequency in Hz */
 
 module_param(frequency, uint, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(frequency, "I2C clock frequency in hertz");
@@ -299,12 +297,12 @@ static int diolan_init(struct i2c_diolan_u2c *dev)
 {
 	int speed, ret;
 
-	if (frequency >= 200000) {
+	if (frequency >= 2 * I2C_MAX_STANDARD_MODE_FREQ) {
 		speed = U2C_I2C_SPEED_FAST;
-		frequency = U2C_I2C_FREQ_FAST;
-	} else if (frequency >= 100000 || frequency == 0) {
+		frequency = I2C_MAX_FAST_MODE_FREQ;
+	} else if (frequency >= I2C_MAX_STANDARD_MODE_FREQ || frequency == 0) {
 		speed = U2C_I2C_SPEED_STD;
-		frequency = U2C_I2C_FREQ_STD;
+		frequency = I2C_MAX_STANDARD_MODE_FREQ;
 	} else {
 		speed = U2C_I2C_SPEED(frequency);
 		if (speed > U2C_I2C_SPEED_2KHZ)
diff --git a/drivers/i2c/busses/i2c-efm32.c b/drivers/i2c/busses/i2c-efm32.c
index a8c6323..18cca8f 100644
--- a/drivers/i2c/busses/i2c-efm32.c
+++ b/drivers/i2c/busses/i2c-efm32.c
@@ -388,7 +388,7 @@ static int efm32_i2c_probe(struct platform_device *pdev)
 	if (!ret) {
 		dev_dbg(&pdev->dev, "using frequency %u\n", frequency);
 	} else {
-		frequency = 100000;
+		frequency = I2C_MAX_STANDARD_MODE_FREQ;
 		dev_info(&pdev->dev, "defaulting to 100 kHz\n");
 	}
 	ddata->frequency = frequency;
diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c
index e7514c1..5270309 100644
--- a/drivers/i2c/busses/i2c-exynos5.c
+++ b/drivers/i2c/busses/i2c-exynos5.c
@@ -164,13 +164,6 @@
 #define HSI2C_MASTER_ID(x)			((x & 0xff) << 24)
 #define MASTER_ID(x)				((x & 0x7) + 0x08)
 
-/*
- * Controller operating frequency, timing values for operation
- * are calculated against this frequency
- */
-#define HSI2C_HS_TX_CLOCK	1000000
-#define HSI2C_FS_TX_CLOCK	100000
-
 #define EXYNOS5_I2C_TIMEOUT (msecs_to_jiffies(100))
 
 enum i2c_type_exynos {
@@ -264,6 +257,9 @@ static void exynos5_i2c_clr_pend_irq(struct exynos5_i2c *i2c)
  * exynos5_i2c_set_timing: updates the registers with appropriate
  * timing values calculated
  *
+ * Timing values for operation are calculated against either 100kHz
+ * or 1MHz controller operating frequency.
+ *
  * Returns 0 on success, -EINVAL if the cycle length cannot
  * be calculated.
  */
@@ -281,7 +277,7 @@ static int exynos5_i2c_set_timing(struct exynos5_i2c *i2c, bool hs_timings)
 	unsigned int t_ftl_cycle;
 	unsigned int clkin = clk_get_rate(i2c->clk);
 	unsigned int op_clk = hs_timings ? i2c->op_clock :
-		(i2c->op_clock >= HSI2C_HS_TX_CLOCK) ? HSI2C_FS_TX_CLOCK :
+		(i2c->op_clock >= I2C_MAX_FAST_MODE_PLUS_FREQ) ? I2C_MAX_STANDARD_MODE_FREQ :
 		i2c->op_clock;
 	int div, clk_cycle, temp;
 
@@ -353,7 +349,7 @@ static int exynos5_hsi2c_clock_setup(struct exynos5_i2c *i2c)
 	/* always set Fast Speed timings */
 	int ret = exynos5_i2c_set_timing(i2c, false);
 
-	if (ret < 0 || i2c->op_clock < HSI2C_HS_TX_CLOCK)
+	if (ret < 0 || i2c->op_clock < I2C_MAX_FAST_MODE_PLUS_FREQ)
 		return ret;
 
 	return exynos5_i2c_set_timing(i2c, true);
@@ -376,7 +372,7 @@ static void exynos5_i2c_init(struct exynos5_i2c *i2c)
 					i2c->regs + HSI2C_CTL);
 	writel(HSI2C_TRAILING_COUNT, i2c->regs + HSI2C_TRAILIG_CTL);
 
-	if (i2c->op_clock >= HSI2C_HS_TX_CLOCK) {
+	if (i2c->op_clock >= I2C_MAX_FAST_MODE_PLUS_FREQ) {
 		writel(HSI2C_MASTER_ID(MASTER_ID(i2c->adap.nr)),
 					i2c->regs + HSI2C_ADDR);
 		i2c_conf |= HSI2C_HS_MODE;
@@ -748,7 +744,7 @@ static int exynos5_i2c_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	if (of_property_read_u32(np, "clock-frequency", &i2c->op_clock))
-		i2c->op_clock = HSI2C_FS_TX_CLOCK;
+		i2c->op_clock = I2C_MAX_STANDARD_MODE_FREQ;
 
 	strlcpy(i2c->adap.name, "exynos5-i2c", sizeof(i2c->adap.name));
 	i2c->adap.owner   = THIS_MODULE;
diff --git a/drivers/i2c/busses/i2c-hix5hd2.c b/drivers/i2c/busses/i2c-hix5hd2.c
index 224f830..6610304 100644
--- a/drivers/i2c/busses/i2c-hix5hd2.c
+++ b/drivers/i2c/busses/i2c-hix5hd2.c
@@ -68,8 +68,6 @@
 #define I2C_ARBITRATE_INTR	BIT(1)
 #define I2C_OVER_INTR		BIT(0)
 
-#define HIX5I2C_MAX_FREQ	400000		/* 400k */
-
 enum hix5hd2_i2c_state {
 	HIX5I2C_STAT_RW_ERR = -1,
 	HIX5I2C_STAT_INIT,
@@ -400,12 +398,12 @@ static int hix5hd2_i2c_probe(struct platform_device *pdev)
 
 	if (of_property_read_u32(np, "clock-frequency", &freq)) {
 		/* use 100k as default value */
-		priv->freq = 100000;
+		priv->freq = I2C_MAX_STANDARD_MODE_FREQ;
 	} else {
-		if (freq > HIX5I2C_MAX_FREQ) {
-			priv->freq = HIX5I2C_MAX_FREQ;
+		if (freq > I2C_MAX_FAST_MODE_FREQ) {
+			priv->freq = I2C_MAX_FAST_MODE_FREQ;
 			dev_warn(priv->dev, "use max freq %d instead\n",
-				 HIX5I2C_MAX_FREQ);
+				 I2C_MAX_FAST_MODE_FREQ);
 		} else {
 			priv->freq = freq;
 		}
diff --git a/drivers/i2c/busses/i2c-img-scb.c b/drivers/i2c/busses/i2c-img-scb.c
index 20a4fbc..422097a 100644
--- a/drivers/i2c/busses/i2c-img-scb.c
+++ b/drivers/i2c/busses/i2c-img-scb.c
@@ -304,7 +304,7 @@ static struct img_i2c_timings timings[] = {
 	/* Standard mode */
 	{
 		.name = "standard",
-		.max_bitrate = 100000,
+		.max_bitrate = I2C_MAX_STANDARD_MODE_FREQ,
 		.tckh = 4000,
 		.tckl = 4700,
 		.tsdh = 4700,
@@ -316,7 +316,7 @@ static struct img_i2c_timings timings[] = {
 	/* Fast mode */
 	{
 		.name = "fast",
-		.max_bitrate = 400000,
+		.max_bitrate = I2C_MAX_FAST_MODE_FREQ,
 		.tckh = 600,
 		.tckl = 1300,
 		.tsdh = 600,
diff --git a/drivers/i2c/busses/i2c-imx-lpi2c.c b/drivers/i2c/busses/i2c-imx-lpi2c.c
index c92b564..94743ba 100644
--- a/drivers/i2c/busses/i2c-imx-lpi2c.c
+++ b/drivers/i2c/busses/i2c-imx-lpi2c.c
@@ -75,12 +75,6 @@
 #define I2C_CLK_RATIO	2
 #define CHUNK_DATA	256
 
-#define LPI2C_DEFAULT_RATE	100000
-#define STARDARD_MAX_BITRATE	400000
-#define FAST_MAX_BITRATE	1000000
-#define FAST_PLUS_MAX_BITRATE	3400000
-#define HIGHSPEED_MAX_BITRATE	5000000
-
 #define I2C_PM_TIMEOUT		10 /* ms */
 
 enum lpi2c_imx_mode {
@@ -152,13 +146,13 @@ static void lpi2c_imx_set_mode(struct lpi2c_imx_struct *lpi2c_imx)
 	unsigned int bitrate = lpi2c_imx->bitrate;
 	enum lpi2c_imx_mode mode;
 
-	if (bitrate < STARDARD_MAX_BITRATE)
+	if (bitrate < I2C_MAX_FAST_MODE_FREQ)
 		mode = STANDARD;
-	else if (bitrate < FAST_MAX_BITRATE)
+	else if (bitrate < I2C_MAX_FAST_MODE_PLUS_FREQ)
 		mode = FAST;
-	else if (bitrate < FAST_PLUS_MAX_BITRATE)
+	else if (bitrate < I2C_MAX_HIGH_SPEED_MODE_FREQ)
 		mode = FAST_PLUS;
-	else if (bitrate < HIGHSPEED_MAX_BITRATE)
+	else if (bitrate < I2C_MAX_ULTRA_FAST_MODE_FREQ)
 		mode = HS;
 	else
 		mode = ULTRA_FAST;
@@ -578,7 +572,7 @@ static int lpi2c_imx_probe(struct platform_device *pdev)
 	ret = of_property_read_u32(pdev->dev.of_node,
 				   "clock-frequency", &lpi2c_imx->bitrate);
 	if (ret)
-		lpi2c_imx->bitrate = LPI2C_DEFAULT_RATE;
+		lpi2c_imx->bitrate = I2C_MAX_STANDARD_MODE_FREQ;
 
 	ret = devm_request_irq(&pdev->dev, irq, lpi2c_imx_isr, 0,
 			       pdev->name, lpi2c_imx);
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index a3b6133..0ab5381 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -34,6 +34,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
+#include <linux/iopoll.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
@@ -49,9 +50,6 @@
 /* This will be the driver name the kernel reports */
 #define DRIVER_NAME "imx-i2c"
 
-/* Default value */
-#define IMX_I2C_BIT_RATE	100000	/* 100kHz */
-
 /*
  * Enable DMA if transfer byte size is bigger than this threshold.
  * As the hardware request, it must bigger than 4 bytes.\
@@ -414,7 +412,7 @@ static void i2c_imx_dma_free(struct imx_i2c_struct *i2c_imx)
 	dma->chan_using = NULL;
 }
 
-static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy)
+static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy, bool atomic)
 {
 	unsigned long orig_jiffies = jiffies;
 	unsigned int temp;
@@ -444,15 +442,37 @@ static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy)
 				"<%s> I2C bus is busy\n", __func__);
 			return -ETIMEDOUT;
 		}
-		schedule();
+		if (atomic)
+			udelay(100);
+		else
+			schedule();
 	}
 
 	return 0;
 }
 
-static int i2c_imx_trx_complete(struct imx_i2c_struct *i2c_imx)
+static int i2c_imx_trx_complete(struct imx_i2c_struct *i2c_imx, bool atomic)
 {
-	wait_event_timeout(i2c_imx->queue, i2c_imx->i2csr & I2SR_IIF, HZ / 10);
+	if (atomic) {
+		void __iomem *addr = i2c_imx->base + (IMX_I2C_I2SR << i2c_imx->hwdata->regshift);
+		unsigned int regval;
+
+		/*
+		 * The formula for the poll timeout is documented in the RM
+		 * Rev.5 on page 1878:
+		 *     T_min = 10/F_scl
+		 * Set the value hard as it is done for the non-atomic use-case.
+		 * Use 10 kHz for the calculation since this is the minimum
+		 * allowed SMBus frequency. Also add an offset of 100us since it
+		 * turned out that the I2SR_IIF bit isn't set correctly within
+		 * the minimum timeout in polling mode.
+		 */
+		readb_poll_timeout_atomic(addr, regval, regval & I2SR_IIF, 5, 1000 + 100);
+		i2c_imx->i2csr = regval;
+		imx_i2c_write_reg(0, i2c_imx, IMX_I2C_I2SR);
+	} else {
+		wait_event_timeout(i2c_imx->queue, i2c_imx->i2csr & I2SR_IIF, HZ / 10);
+	}
 
 	if (unlikely(!(i2c_imx->i2csr & I2SR_IIF))) {
 		dev_dbg(&i2c_imx->adapter.dev, "<%s> Timeout\n", __func__);
@@ -530,7 +550,7 @@ static int i2c_imx_clk_notifier_call(struct notifier_block *nb,
 	return NOTIFY_OK;
 }
 
-static int i2c_imx_start(struct imx_i2c_struct *i2c_imx)
+static int i2c_imx_start(struct imx_i2c_struct *i2c_imx, bool atomic)
 {
 	unsigned int temp = 0;
 	int result;
@@ -543,23 +563,29 @@ static int i2c_imx_start(struct imx_i2c_struct *i2c_imx)
 	imx_i2c_write_reg(i2c_imx->hwdata->i2cr_ien_opcode, i2c_imx, IMX_I2C_I2CR);
 
 	/* Wait controller to be stable */
-	usleep_range(50, 150);
+	if (atomic)
+		udelay(50);
+	else
+		usleep_range(50, 150);
 
 	/* Start I2C transaction */
 	temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
 	temp |= I2CR_MSTA;
 	imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
-	result = i2c_imx_bus_busy(i2c_imx, 1);
+	result = i2c_imx_bus_busy(i2c_imx, 1, atomic);
 	if (result)
 		return result;
 
 	temp |= I2CR_IIEN | I2CR_MTX | I2CR_TXAK;
+	if (atomic)
+		temp &= ~I2CR_IIEN; /* Disable interrupt */
+
 	temp &= ~I2CR_DMAEN;
 	imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
 	return result;
 }
 
-static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx)
+static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx, bool atomic)
 {
 	unsigned int temp = 0;
 
@@ -581,7 +607,7 @@ static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx)
 	}
 
 	if (!i2c_imx->stopped)
-		i2c_imx_bus_busy(i2c_imx, 0);
+		i2c_imx_bus_busy(i2c_imx, 0, atomic);
 
 	/* Disable I2C controller */
 	temp = i2c_imx->hwdata->i2cr_ien_opcode ^ I2CR_IEN,
@@ -662,7 +688,7 @@ static int i2c_imx_dma_write(struct imx_i2c_struct *i2c_imx,
 	/* The last data byte must be transferred by the CPU. */
 	imx_i2c_write_reg(msgs->buf[msgs->len-1],
 				i2c_imx, IMX_I2C_I2DR);
-	result = i2c_imx_trx_complete(i2c_imx);
+	result = i2c_imx_trx_complete(i2c_imx, false);
 	if (result)
 		return result;
 
@@ -721,7 +747,7 @@ static int i2c_imx_dma_read(struct imx_i2c_struct *i2c_imx,
 
 	msgs->buf[msgs->len-2] = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
 	/* read n byte data */
-	result = i2c_imx_trx_complete(i2c_imx);
+	result = i2c_imx_trx_complete(i2c_imx, false);
 	if (result)
 		return result;
 
@@ -734,7 +760,7 @@ static int i2c_imx_dma_read(struct imx_i2c_struct *i2c_imx,
 		temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
 		temp &= ~(I2CR_MSTA | I2CR_MTX);
 		imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
-		i2c_imx_bus_busy(i2c_imx, 0);
+		i2c_imx_bus_busy(i2c_imx, 0, false);
 	} else {
 		/*
 		 * For i2c master receiver repeat restart operation like:
@@ -752,7 +778,8 @@ static int i2c_imx_dma_read(struct imx_i2c_struct *i2c_imx,
 	return 0;
 }
 
-static int i2c_imx_write(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs)
+static int i2c_imx_write(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs,
+			 bool atomic)
 {
 	int i, result;
 
@@ -761,7 +788,7 @@ static int i2c_imx_write(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs)
 
 	/* write slave address */
 	imx_i2c_write_reg(i2c_8bit_addr_from_msg(msgs), i2c_imx, IMX_I2C_I2DR);
-	result = i2c_imx_trx_complete(i2c_imx);
+	result = i2c_imx_trx_complete(i2c_imx, atomic);
 	if (result)
 		return result;
 	result = i2c_imx_acked(i2c_imx);
@@ -775,7 +802,7 @@ static int i2c_imx_write(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs)
 			"<%s> write byte: B%d=0x%X\n",
 			__func__, i, msgs->buf[i]);
 		imx_i2c_write_reg(msgs->buf[i], i2c_imx, IMX_I2C_I2DR);
-		result = i2c_imx_trx_complete(i2c_imx);
+		result = i2c_imx_trx_complete(i2c_imx, atomic);
 		if (result)
 			return result;
 		result = i2c_imx_acked(i2c_imx);
@@ -785,7 +812,8 @@ static int i2c_imx_write(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs)
 	return 0;
 }
 
-static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs, bool is_lastmsg)
+static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs,
+			bool is_lastmsg, bool atomic)
 {
 	int i, result;
 	unsigned int temp;
@@ -798,7 +826,7 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs, bo
 
 	/* write slave address */
 	imx_i2c_write_reg(i2c_8bit_addr_from_msg(msgs), i2c_imx, IMX_I2C_I2DR);
-	result = i2c_imx_trx_complete(i2c_imx);
+	result = i2c_imx_trx_complete(i2c_imx, atomic);
 	if (result)
 		return result;
 	result = i2c_imx_acked(i2c_imx);
@@ -831,7 +859,7 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs, bo
 	for (i = 0; i < msgs->len; i++) {
 		u8 len = 0;
 
-		result = i2c_imx_trx_complete(i2c_imx);
+		result = i2c_imx_trx_complete(i2c_imx, atomic);
 		if (result)
 			return result;
 		/*
@@ -859,7 +887,7 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs, bo
 				temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
 				temp &= ~(I2CR_MSTA | I2CR_MTX);
 				imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
-				i2c_imx_bus_busy(i2c_imx, 0);
+				i2c_imx_bus_busy(i2c_imx, 0, atomic);
 			} else {
 				/*
 				 * For i2c master receiver repeat restart operation like:
@@ -890,8 +918,8 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs, bo
 	return 0;
 }
 
-static int i2c_imx_xfer(struct i2c_adapter *adapter,
-						struct i2c_msg *msgs, int num)
+static int i2c_imx_xfer_common(struct i2c_adapter *adapter,
+			       struct i2c_msg *msgs, int num, bool atomic)
 {
 	unsigned int i, temp;
 	int result;
@@ -900,16 +928,16 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter,
 
 	dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
 
-	result = pm_runtime_get_sync(i2c_imx->adapter.dev.parent);
-	if (result < 0)
-		goto out;
-
 	/* Start I2C transfer */
-	result = i2c_imx_start(i2c_imx);
+	result = i2c_imx_start(i2c_imx, atomic);
 	if (result) {
-		if (i2c_imx->adapter.bus_recovery_info) {
+		/*
+		 * Bus recovery uses gpiod_get_value_cansleep() which is not
+		 * allowed within atomic context.
+		 */
+		if (!atomic && i2c_imx->adapter.bus_recovery_info) {
 			i2c_recover_bus(&i2c_imx->adapter);
-			result = i2c_imx_start(i2c_imx);
+			result = i2c_imx_start(i2c_imx, atomic);
 		}
 	}
 
@@ -927,7 +955,7 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter,
 			temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
 			temp |= I2CR_RSTA;
 			imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
-			result = i2c_imx_bus_busy(i2c_imx, 1);
+			result = i2c_imx_bus_busy(i2c_imx, 1, atomic);
 			if (result)
 				goto fail0;
 		}
@@ -951,13 +979,14 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter,
 			(temp & I2SR_SRW ? 1 : 0), (temp & I2SR_IIF ? 1 : 0),
 			(temp & I2SR_RXAK ? 1 : 0));
 #endif
-		if (msgs[i].flags & I2C_M_RD)
-			result = i2c_imx_read(i2c_imx, &msgs[i], is_lastmsg);
-		else {
-			if (i2c_imx->dma && msgs[i].len >= DMA_THRESHOLD)
+		if (msgs[i].flags & I2C_M_RD) {
+			result = i2c_imx_read(i2c_imx, &msgs[i], is_lastmsg, atomic);
+		} else {
+			if (!atomic &&
+			    i2c_imx->dma && msgs[i].len >= DMA_THRESHOLD)
 				result = i2c_imx_dma_write(i2c_imx, &msgs[i]);
 			else
-				result = i2c_imx_write(i2c_imx, &msgs[i]);
+				result = i2c_imx_write(i2c_imx, &msgs[i], atomic);
 		}
 		if (result)
 			goto fail0;
@@ -965,18 +994,49 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter,
 
 fail0:
 	/* Stop I2C transfer */
-	i2c_imx_stop(i2c_imx);
+	i2c_imx_stop(i2c_imx, atomic);
 
-	pm_runtime_mark_last_busy(i2c_imx->adapter.dev.parent);
-	pm_runtime_put_autosuspend(i2c_imx->adapter.dev.parent);
-
-out:
 	dev_dbg(&i2c_imx->adapter.dev, "<%s> exit with: %s: %d\n", __func__,
 		(result < 0) ? "error" : "success msg",
 			(result < 0) ? result : num);
 	return (result < 0) ? result : num;
 }
 
+static int i2c_imx_xfer(struct i2c_adapter *adapter,
+			struct i2c_msg *msgs, int num)
+{
+	struct imx_i2c_struct *i2c_imx = i2c_get_adapdata(adapter);
+	int result;
+
+	result = pm_runtime_get_sync(i2c_imx->adapter.dev.parent);
+	if (result < 0)
+		return result;
+
+	result = i2c_imx_xfer_common(adapter, msgs, num, false);
+
+	pm_runtime_mark_last_busy(i2c_imx->adapter.dev.parent);
+	pm_runtime_put_autosuspend(i2c_imx->adapter.dev.parent);
+
+	return result;
+}
+
+static int i2c_imx_xfer_atomic(struct i2c_adapter *adapter,
+			       struct i2c_msg *msgs, int num)
+{
+	struct imx_i2c_struct *i2c_imx = i2c_get_adapdata(adapter);
+	int result;
+
+	result = clk_enable(i2c_imx->clk);
+	if (result)
+		return result;
+
+	result = i2c_imx_xfer_common(adapter, msgs, num, true);
+
+	clk_disable(i2c_imx->clk);
+
+	return result;
+}
+
 static void i2c_imx_prepare_recovery(struct i2c_adapter *adap)
 {
 	struct imx_i2c_struct *i2c_imx;
@@ -1049,8 +1109,9 @@ static u32 i2c_imx_func(struct i2c_adapter *adapter)
 }
 
 static const struct i2c_algorithm i2c_imx_algo = {
-	.master_xfer	= i2c_imx_xfer,
-	.functionality	= i2c_imx_func,
+	.master_xfer = i2c_imx_xfer,
+	.master_xfer_atomic = i2c_imx_xfer_atomic,
+	.functionality = i2c_imx_func,
 };
 
 static int i2c_imx_probe(struct platform_device *pdev)
@@ -1066,10 +1127,8 @@ static int i2c_imx_probe(struct platform_device *pdev)
 	dev_dbg(&pdev->dev, "<%s>\n", __func__);
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(&pdev->dev, "can't get irq number\n");
+	if (irq < 0)
 		return irq;
-	}
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	base = devm_ioremap_resource(&pdev->dev, res);
@@ -1139,7 +1198,7 @@ static int i2c_imx_probe(struct platform_device *pdev)
 		goto rpm_disable;
 
 	/* Set up clock divider */
-	i2c_imx->bitrate = IMX_I2C_BIT_RATE;
+	i2c_imx->bitrate = I2C_MAX_STANDARD_MODE_FREQ;
 	ret = of_property_read_u32(pdev->dev.of_node,
 				   "clock-frequency", &i2c_imx->bitrate);
 	if (ret < 0 && pdata && pdata->bitrate)
diff --git a/drivers/i2c/busses/i2c-lpc2k.c b/drivers/i2c/busses/i2c-lpc2k.c
index deea18b..13b0c12 100644
--- a/drivers/i2c/busses/i2c-lpc2k.c
+++ b/drivers/i2c/busses/i2c-lpc2k.c
@@ -396,7 +396,7 @@ static int i2c_lpc2k_probe(struct platform_device *pdev)
 	ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency",
 				   &bus_clk_rate);
 	if (ret)
-		bus_clk_rate = 100000; /* 100 kHz default clock rate */
+		bus_clk_rate = I2C_MAX_STANDARD_MODE_FREQ;
 
 	clkrate = clk_get_rate(i2c->clk);
 	if (clkrate == 0) {
@@ -407,9 +407,9 @@ static int i2c_lpc2k_probe(struct platform_device *pdev)
 
 	/* Setup I2C dividers to generate clock with proper duty cycle */
 	clkrate = clkrate / bus_clk_rate;
-	if (bus_clk_rate <= 100000)
+	if (bus_clk_rate <= I2C_MAX_STANDARD_MODE_FREQ)
 		scl_high = (clkrate * I2C_STD_MODE_DUTY) / 100;
-	else if (bus_clk_rate <= 400000)
+	else if (bus_clk_rate <= I2C_MAX_FAST_MODE_FREQ)
 		scl_high = (clkrate * I2C_FAST_MODE_DUTY) / 100;
 	else
 		scl_high = (clkrate * I2C_FAST_MODE_PLUS_DUTY) / 100;
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 2152ec5f..0ca6c38a 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -56,9 +56,6 @@
 #define I2C_DMA_4G_MODE			0x0001
 
 #define I2C_DEFAULT_CLK_DIV		5
-#define I2C_DEFAULT_SPEED		100000	/* hz */
-#define MAX_FS_MODE_SPEED		400000
-#define MAX_HS_MODE_SPEED		3400000
 #define MAX_SAMPLE_CNT_DIV		8
 #define MAX_STEP_CNT_DIV		64
 #define MAX_HS_STEP_CNT_DIV		8
@@ -450,10 +447,10 @@ static int mtk_i2c_calculate_speed(struct mtk_i2c *i2c, unsigned int clk_src,
 	unsigned int best_mul;
 	unsigned int cnt_mul;
 
-	if (target_speed > MAX_HS_MODE_SPEED)
-		target_speed = MAX_HS_MODE_SPEED;
+	if (target_speed > I2C_MAX_FAST_MODE_PLUS_FREQ)
+		target_speed = I2C_MAX_FAST_MODE_PLUS_FREQ;
 
-	if (target_speed > MAX_FS_MODE_SPEED)
+	if (target_speed > I2C_MAX_FAST_MODE_FREQ)
 		max_step_cnt = MAX_HS_STEP_CNT_DIV;
 	else
 		max_step_cnt = MAX_STEP_CNT_DIV;
@@ -514,9 +511,9 @@ static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk)
 	clk_src = parent_clk / i2c->clk_src_div;
 	target_speed = i2c->speed_hz;
 
-	if (target_speed > MAX_FS_MODE_SPEED) {
+	if (target_speed > I2C_MAX_FAST_MODE_FREQ) {
 		/* Set master code speed register */
-		ret = mtk_i2c_calculate_speed(i2c, clk_src, MAX_FS_MODE_SPEED,
+		ret = mtk_i2c_calculate_speed(i2c, clk_src, I2C_MAX_FAST_MODE_FREQ,
 					      &l_step_cnt, &l_sample_cnt);
 		if (ret < 0)
 			return ret;
@@ -581,7 +578,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
 
 	control_reg = mtk_i2c_readw(i2c, OFFSET_CONTROL) &
 			~(I2C_CONTROL_DIR_CHANGE | I2C_CONTROL_RS);
-	if ((i2c->speed_hz > MAX_FS_MODE_SPEED) || (left_num >= 1))
+	if ((i2c->speed_hz > I2C_MAX_FAST_MODE_FREQ) || (left_num >= 1))
 		control_reg |= I2C_CONTROL_RS;
 
 	if (i2c->op == I2C_MASTER_WRRD)
@@ -590,7 +587,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
 	mtk_i2c_writew(i2c, control_reg, OFFSET_CONTROL);
 
 	/* set start condition */
-	if (i2c->speed_hz <= I2C_DEFAULT_SPEED)
+	if (i2c->speed_hz <= I2C_MAX_STANDARD_MODE_FREQ)
 		mtk_i2c_writew(i2c, I2C_ST_START_CON, OFFSET_EXT_CONF);
 	else
 		mtk_i2c_writew(i2c, I2C_FS_START_CON, OFFSET_EXT_CONF);
@@ -798,7 +795,7 @@ static int mtk_i2c_transfer(struct i2c_adapter *adap,
 		}
 	}
 
-	if (i2c->auto_restart && num >= 2 && i2c->speed_hz > MAX_FS_MODE_SPEED)
+	if (i2c->auto_restart && num >= 2 && i2c->speed_hz > I2C_MAX_FAST_MODE_FREQ)
 		/* ignore the first restart irq after the master code,
 		 * otherwise the first transfer will be discarded.
 		 */
@@ -893,7 +890,7 @@ static int mtk_i2c_parse_dt(struct device_node *np, struct mtk_i2c *i2c)
 
 	ret = of_property_read_u32(np, "clock-frequency", &i2c->speed_hz);
 	if (ret < 0)
-		i2c->speed_hz = I2C_DEFAULT_SPEED;
+		i2c->speed_hz = I2C_MAX_STANDARD_MODE_FREQ;
 
 	ret = of_property_read_u32(np, "clock-div", &i2c->clk_src_div);
 	if (ret < 0)
diff --git a/drivers/i2c/busses/i2c-mt7621.c b/drivers/i2c/busses/i2c-mt7621.c
index 62df837..45fe4a7 100644
--- a/drivers/i2c/busses/i2c-mt7621.c
+++ b/drivers/i2c/busses/i2c-mt7621.c
@@ -300,7 +300,7 @@ static int mtk_i2c_probe(struct platform_device *pdev)
 
 	if (of_property_read_u32(pdev->dev.of_node, "clock-frequency",
 				 &i2c->bus_freq))
-		i2c->bus_freq = 100000;
+		i2c->bus_freq = I2C_MAX_STANDARD_MODE_FREQ;
 
 	if (i2c->bus_freq == 0) {
 		dev_warn(i2c->dev, "clock-frequency 0 not supported\n");
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index febb7c7..9b8f1d8 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -810,7 +810,7 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
 	tclk = clk_get_rate(drv_data->clk);
 
 	if (of_property_read_u32(np, "clock-frequency", &bus_freq))
-		bus_freq = 100000; /* 100kHz by default */
+		bus_freq = I2C_MAX_STANDARD_MODE_FREQ; /* 100kHz by default */
 
 	if (of_device_is_compatible(np, "allwinner,sun4i-a10-i2c") ||
 	    of_device_is_compatible(np, "allwinner,sun6i-a31-i2c"))
@@ -846,14 +846,14 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
 	if (of_device_is_compatible(np, "marvell,mv78230-i2c")) {
 		drv_data->offload_enabled = true;
 		/* The delay is only needed in standard mode (100kHz) */
-		if (bus_freq <= 100000)
+		if (bus_freq <= I2C_MAX_STANDARD_MODE_FREQ)
 			drv_data->errata_delay = true;
 	}
 
 	if (of_device_is_compatible(np, "marvell,mv78230-a0-i2c")) {
 		drv_data->offload_enabled = false;
 		/* The delay is only needed in standard mode (100kHz) */
-		if (bus_freq <= 100000)
+		if (bus_freq <= I2C_MAX_STANDARD_MODE_FREQ)
 			drv_data->errata_delay = true;
 	}
 
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index 8922491..9587347 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -731,7 +731,7 @@ static void mxs_i2c_derive_timing(struct mxs_i2c_dev *i2c, uint32_t speed)
 	 * This is compensated for by subtracting the respective constants
 	 * from the values written to the timing registers.
 	 */
-	if (speed > 100000) {
+	if (speed > I2C_MAX_STANDARD_MODE_FREQ) {
 		/* fast mode */
 		low_count = DIV_ROUND_CLOSEST(divider * 13, (13 + 6));
 		high_count = DIV_ROUND_CLOSEST(divider * 6, (13 + 6));
@@ -769,7 +769,7 @@ static int mxs_i2c_get_ofdata(struct mxs_i2c_dev *i2c)
 	ret = of_property_read_u32(node, "clock-frequency", &speed);
 	if (ret) {
 		dev_warn(dev, "No I2C speed selected, using 100kHz\n");
-		speed = 100000;
+		speed = I2C_MAX_STANDARD_MODE_FREQ;
 	}
 
 	mxs_i2c_derive_timing(i2c, speed);
@@ -836,10 +836,10 @@ static int mxs_i2c_probe(struct platform_device *pdev)
 	}
 
 	/* Setup the DMA */
-	i2c->dmach = dma_request_slave_channel(dev, "rx-tx");
-	if (!i2c->dmach) {
+	i2c->dmach = dma_request_chan(dev, "rx-tx");
+	if (IS_ERR(i2c->dmach)) {
 		dev_err(dev, "Failed to request dma\n");
-		return -ENODEV;
+		return PTR_ERR(i2c->dmach);
 	}
 
 	platform_set_drvdata(pdev, i2c);
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index 01a7d72..e1e8d4ef 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -396,7 +396,7 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev)
 	 * 2 whereas it is 3 for fast and fastplus mode of
 	 * operation. TODO - high speed support.
 	 */
-	div = (dev->clk_freq > 100000) ? 3 : 2;
+	div = (dev->clk_freq > I2C_MAX_STANDARD_MODE_FREQ) ? 3 : 2;
 
 	/*
 	 * generate the mask for baud rate counters. The controller
@@ -420,7 +420,7 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev)
 	if (dev->sm > I2C_FREQ_MODE_FAST) {
 		dev_err(&dev->adev->dev,
 			"do not support this mode defaulting to std. mode\n");
-		brcr2 = i2c_clk/(100000 * 2) & 0xffff;
+		brcr2 = i2c_clk / (I2C_MAX_STANDARD_MODE_FREQ * 2) & 0xffff;
 		writel((brcr1 | brcr2), dev->virtbase + I2C_BRCR);
 		writel(I2C_FREQ_MODE_STANDARD << 4,
 				dev->virtbase + I2C_CR);
@@ -949,10 +949,10 @@ static void nmk_i2c_of_probe(struct device_node *np,
 {
 	/* Default to 100 kHz if no frequency is given in the node */
 	if (of_property_read_u32(np, "clock-frequency", &nmk->clk_freq))
-		nmk->clk_freq = 100000;
+		nmk->clk_freq = I2C_MAX_STANDARD_MODE_FREQ;
 
 	/* This driver only supports 'standard' and 'fast' modes of operation. */
-	if (nmk->clk_freq <= 100000)
+	if (nmk->clk_freq <= I2C_MAX_STANDARD_MODE_FREQ)
 		nmk->sm = I2C_FREQ_MODE_STANDARD;
 	else
 		nmk->sm = I2C_FREQ_MODE_FAST;
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 2dfea35..71b4637 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1355,7 +1355,6 @@ omap_i2c_probe(struct platform_device *pdev)
 {
 	struct omap_i2c_dev	*omap;
 	struct i2c_adapter	*adap;
-	struct resource		*mem;
 	const struct omap_i2c_bus_platform_data *pdata =
 		dev_get_platdata(&pdev->dev);
 	struct device_node	*node = pdev->dev.of_node;
@@ -1375,14 +1374,13 @@ omap_i2c_probe(struct platform_device *pdev)
 	if (!omap)
 		return -ENOMEM;
 
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	omap->base = devm_ioremap_resource(&pdev->dev, mem);
+	omap->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(omap->base))
 		return PTR_ERR(omap->base);
 
 	match = of_match_device(of_match_ptr(omap_i2c_of_match), &pdev->dev);
 	if (match) {
-		u32 freq = 100000; /* default to 100000 Hz */
+		u32 freq = I2C_MAX_STANDARD_MODE_FREQ;
 
 		pdata = match->data;
 		omap->flags = pdata->flags;
diff --git a/drivers/i2c/busses/i2c-owl.c b/drivers/i2c/busses/i2c-owl.c
index b6b5a49..3ab8be6 100644
--- a/drivers/i2c/busses/i2c-owl.c
+++ b/drivers/i2c/busses/i2c-owl.c
@@ -87,9 +87,6 @@
 
 #define OWL_I2C_MAX_RETRIES	50
 
-#define OWL_I2C_DEF_SPEED_HZ	100000
-#define OWL_I2C_MAX_SPEED_HZ	400000
-
 struct owl_i2c_dev {
 	struct i2c_adapter	adap;
 	struct i2c_msg		*msg;
@@ -419,11 +416,11 @@ static int owl_i2c_probe(struct platform_device *pdev)
 
 	if (of_property_read_u32(dev->of_node, "clock-frequency",
 				 &i2c_dev->bus_freq))
-		i2c_dev->bus_freq = OWL_I2C_DEF_SPEED_HZ;
+		i2c_dev->bus_freq = I2C_MAX_STANDARD_MODE_FREQ;
 
 	/* We support only frequencies of 100k and 400k for now */
-	if (i2c_dev->bus_freq != OWL_I2C_DEF_SPEED_HZ &&
-	    i2c_dev->bus_freq != OWL_I2C_MAX_SPEED_HZ) {
+	if (i2c_dev->bus_freq != I2C_MAX_STANDARD_MODE_FREQ &&
+	    i2c_dev->bus_freq != I2C_MAX_FAST_MODE_FREQ) {
 		dev_err(dev, "invalid clock-frequency %d\n", i2c_dev->bus_freq);
 		return -EINVAL;
 	}
diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c
index 81eb441..a535889 100644
--- a/drivers/i2c/busses/i2c-parport.c
+++ b/drivers/i2c/busses/i2c-parport.c
@@ -333,13 +333,17 @@ static void i2c_parport_attach(struct parport *port)
 
 	/* Setup SMBus alert if supported */
 	if (adapter_parm[type].smbus_alert) {
-		adapter->ara = i2c_setup_smbus_alert(&adapter->adapter,
-						     &adapter->alert_data);
-		if (adapter->ara)
+		struct i2c_client *ara;
+
+		ara = i2c_new_smbus_alert_device(&adapter->adapter,
+						 &adapter->alert_data);
+		if (!IS_ERR(ara)) {
+			adapter->ara = ara;
 			parport_enable_irq(port);
-		else
+		} else {
 			dev_warn(&adapter->pdev->dev,
 				 "Failed to register ARA client\n");
+		}
 	}
 
 	/* Add the new adapter to the list */
diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
index 973e533..d565714 100644
--- a/drivers/i2c/busses/i2c-powermac.c
+++ b/drivers/i2c/busses/i2c-powermac.c
@@ -279,14 +279,13 @@ static bool i2c_powermac_get_type(struct i2c_adapter *adap,
 {
 	char tmp[16];
 
-	/* Note: we to _NOT_ want the standard
-	 * i2c drivers to match with any of our powermac stuff
-	 * unless they have been specifically modified to handle
-	 * it on a case by case basis. For example, for thermal
-	 * control, things like lm75 etc... shall match with their
-	 * corresponding windfarm drivers, _NOT_ the generic ones,
-	 * so we force a prefix of AAPL, onto the modalias to
-	 * make that happen
+	/*
+	 * Note: we do _NOT_ want the standard i2c drivers to match with any of
+	 * our powermac stuff unless they have been specifically modified to
+	 * handle it on a case by case basis. For example, for thermal control,
+	 * things like lm75 etc... shall match with their corresponding
+	 * windfarm drivers, _NOT_ the generic ones, so we force a prefix of
+	 * 'MAC', onto the modalias to make that happen
 	 */
 
 	/* First try proper modalias */
diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index 17abf60c..18d1e4f 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -10,7 +10,6 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/qcom-geni-se.h>
@@ -502,45 +501,40 @@ static int geni_i2c_probe(struct platform_device *pdev)
 	struct resource *res;
 	u32 proto, tx_depth;
 	int ret;
+	struct device *dev = &pdev->dev;
 
-	gi2c = devm_kzalloc(&pdev->dev, sizeof(*gi2c), GFP_KERNEL);
+	gi2c = devm_kzalloc(dev, sizeof(*gi2c), GFP_KERNEL);
 	if (!gi2c)
 		return -ENOMEM;
 
-	gi2c->se.dev = &pdev->dev;
-	gi2c->se.wrapper = dev_get_drvdata(pdev->dev.parent);
+	gi2c->se.dev = dev;
+	gi2c->se.wrapper = dev_get_drvdata(dev->parent);
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	gi2c->se.base = devm_ioremap_resource(&pdev->dev, res);
+	gi2c->se.base = devm_ioremap_resource(dev, res);
 	if (IS_ERR(gi2c->se.base))
 		return PTR_ERR(gi2c->se.base);
 
-	gi2c->se.clk = devm_clk_get(&pdev->dev, "se");
-	if (IS_ERR(gi2c->se.clk) && !has_acpi_companion(&pdev->dev)) {
-		ret = PTR_ERR(gi2c->se.clk);
-		dev_err(&pdev->dev, "Err getting SE Core clk %d\n", ret);
-		return ret;
-	}
+	gi2c->se.clk = devm_clk_get(dev, "se");
+	if (IS_ERR(gi2c->se.clk) && !has_acpi_companion(dev))
+		return PTR_ERR(gi2c->se.clk);
 
-	ret = device_property_read_u32(&pdev->dev, "clock-frequency",
-							&gi2c->clk_freq_out);
+	ret = device_property_read_u32(dev, "clock-frequency",
+				       &gi2c->clk_freq_out);
 	if (ret) {
-		dev_info(&pdev->dev,
-			"Bus frequency not specified, default to 100kHz.\n");
+		dev_info(dev, "Bus frequency not specified, default to 100kHz.\n");
 		gi2c->clk_freq_out = KHZ(100);
 	}
 
-	if (has_acpi_companion(&pdev->dev))
-		ACPI_COMPANION_SET(&gi2c->adap.dev, ACPI_COMPANION(&pdev->dev));
+	if (has_acpi_companion(dev))
+		ACPI_COMPANION_SET(&gi2c->adap.dev, ACPI_COMPANION(dev));
 
 	gi2c->irq = platform_get_irq(pdev, 0);
-	if (gi2c->irq < 0) {
-		dev_err(&pdev->dev, "IRQ error for i2c-geni\n");
+	if (gi2c->irq < 0)
 		return gi2c->irq;
-	}
 
 	ret = geni_i2c_clk_map_idx(gi2c);
 	if (ret) {
-		dev_err(&pdev->dev, "Invalid clk frequency %d Hz: %d\n",
+		dev_err(dev, "Invalid clk frequency %d Hz: %d\n",
 			gi2c->clk_freq_out, ret);
 		return ret;
 	}
@@ -549,29 +543,29 @@ static int geni_i2c_probe(struct platform_device *pdev)
 	init_completion(&gi2c->done);
 	spin_lock_init(&gi2c->lock);
 	platform_set_drvdata(pdev, gi2c);
-	ret = devm_request_irq(&pdev->dev, gi2c->irq, geni_i2c_irq,
-			       IRQF_TRIGGER_HIGH, "i2c_geni", gi2c);
+	ret = devm_request_irq(dev, gi2c->irq, geni_i2c_irq, 0,
+			       dev_name(dev), gi2c);
 	if (ret) {
-		dev_err(&pdev->dev, "Request_irq failed:%d: err:%d\n",
+		dev_err(dev, "Request_irq failed:%d: err:%d\n",
 			gi2c->irq, ret);
 		return ret;
 	}
 	/* Disable the interrupt so that the system can enter low-power mode */
 	disable_irq(gi2c->irq);
 	i2c_set_adapdata(&gi2c->adap, gi2c);
-	gi2c->adap.dev.parent = &pdev->dev;
-	gi2c->adap.dev.of_node = pdev->dev.of_node;
+	gi2c->adap.dev.parent = dev;
+	gi2c->adap.dev.of_node = dev->of_node;
 	strlcpy(gi2c->adap.name, "Geni-I2C", sizeof(gi2c->adap.name));
 
 	ret = geni_se_resources_on(&gi2c->se);
 	if (ret) {
-		dev_err(&pdev->dev, "Error turning on resources %d\n", ret);
+		dev_err(dev, "Error turning on resources %d\n", ret);
 		return ret;
 	}
 	proto = geni_se_read_proto(&gi2c->se);
 	tx_depth = geni_se_get_tx_fifo_depth(&gi2c->se);
 	if (proto != GENI_SE_I2C) {
-		dev_err(&pdev->dev, "Invalid proto %d\n", proto);
+		dev_err(dev, "Invalid proto %d\n", proto);
 		geni_se_resources_off(&gi2c->se);
 		return -ENXIO;
 	}
@@ -581,11 +575,11 @@ static int geni_i2c_probe(struct platform_device *pdev)
 							true, true, true);
 	ret = geni_se_resources_off(&gi2c->se);
 	if (ret) {
-		dev_err(&pdev->dev, "Error turning off resources %d\n", ret);
+		dev_err(dev, "Error turning off resources %d\n", ret);
 		return ret;
 	}
 
-	dev_dbg(&pdev->dev, "i2c fifo/se-dma mode. fifo depth:%d\n", tx_depth);
+	dev_dbg(dev, "i2c fifo/se-dma mode. fifo depth:%d\n", tx_depth);
 
 	gi2c->suspended = 1;
 	pm_runtime_set_suspended(gi2c->se.dev);
@@ -595,12 +589,12 @@ static int geni_i2c_probe(struct platform_device *pdev)
 
 	ret = i2c_add_adapter(&gi2c->adap);
 	if (ret) {
-		dev_err(&pdev->dev, "Error adding i2c adapter %d\n", ret);
+		dev_err(dev, "Error adding i2c adapter %d\n", ret);
 		pm_runtime_disable(gi2c->se.dev);
 		return ret;
 	}
 
-	dev_dbg(&pdev->dev, "Geni-I2C adaptor successfully added\n");
+	dev_dbg(dev, "Geni-I2C adaptor successfully added\n");
 
 	return 0;
 }
diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
index 2d7dabe..748872a 100644
--- a/drivers/i2c/busses/i2c-qup.c
+++ b/drivers/i2c/busses/i2c-qup.c
@@ -136,13 +136,8 @@
  */
 #define TOUT_MIN			2
 
-/* I2C Frequency Modes */
-#define I2C_STANDARD_FREQ		100000
-#define I2C_FAST_MODE_FREQ		400000
-#define I2C_FAST_MODE_PLUS_FREQ		1000000
-
 /* Default values. Use these if FW query fails */
-#define DEFAULT_CLK_FREQ I2C_STANDARD_FREQ
+#define DEFAULT_CLK_FREQ I2C_MAX_STANDARD_MODE_FREQ
 #define DEFAULT_SRC_CLK 20000000
 
 /*
@@ -1756,7 +1751,7 @@ static int qup_i2c_probe(struct platform_device *pdev)
 
 nodma:
 	/* We support frequencies up to FAST Mode Plus (1MHz) */
-	if (!clk_freq || clk_freq > I2C_FAST_MODE_PLUS_FREQ) {
+	if (!clk_freq || clk_freq > I2C_MAX_FAST_MODE_PLUS_FREQ) {
 		dev_err(qup->dev, "clock frequency not supported %d\n",
 			clk_freq);
 		return -EINVAL;
@@ -1861,7 +1856,7 @@ static int qup_i2c_probe(struct platform_device *pdev)
 	qup->in_fifo_sz = qup->in_blk_sz * (2 << size);
 
 	hs_div = 3;
-	if (clk_freq <= I2C_STANDARD_FREQ) {
+	if (clk_freq <= I2C_MAX_STANDARD_MODE_FREQ) {
 		fs_div = ((src_clk_freq / clk_freq) / 2) - 3;
 		qup->clk_ctl = (hs_div << 8) | (fs_div & 0xff);
 	} else {
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index 879f0e6..3b5397a 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -235,17 +235,20 @@ static int rcar_i2c_bus_barrier(struct rcar_i2c_priv *priv)
 	return i2c_recover_bus(&priv->adap);
 }
 
-static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv, struct i2c_timings *t)
+static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv)
 {
 	u32 scgd, cdf, round, ick, sum, scl, cdf_width;
 	unsigned long rate;
 	struct device *dev = rcar_i2c_priv_to_dev(priv);
+	struct i2c_timings t = {
+		.bus_freq_hz		= I2C_MAX_STANDARD_MODE_FREQ,
+		.scl_fall_ns		= 35,
+		.scl_rise_ns		= 200,
+		.scl_int_delay_ns	= 50,
+	};
 
 	/* Fall back to previously used values if not supplied */
-	t->bus_freq_hz = t->bus_freq_hz ?: 100000;
-	t->scl_fall_ns = t->scl_fall_ns ?: 35;
-	t->scl_rise_ns = t->scl_rise_ns ?: 200;
-	t->scl_int_delay_ns = t->scl_int_delay_ns ?: 50;
+	i2c_parse_fw_timings(dev, &t, false);
 
 	switch (priv->devtype) {
 	case I2C_RCAR_GEN1:
@@ -291,7 +294,7 @@ static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv, struct i2c_timin
 	 *  = F[sum * ick / 1000000000]
 	 *  = F[(ick / 1000000) * sum / 1000]
 	 */
-	sum = t->scl_fall_ns + t->scl_rise_ns + t->scl_int_delay_ns;
+	sum = t.scl_fall_ns + t.scl_rise_ns + t.scl_int_delay_ns;
 	round = (ick + 500000) / 1000000 * sum;
 	round = (round + 500) / 1000;
 
@@ -309,7 +312,7 @@ static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv, struct i2c_timin
 	 */
 	for (scgd = 0; scgd < 0x40; scgd++) {
 		scl = ick / (20 + (scgd * 8) + round);
-		if (scl <= t->bus_freq_hz)
+		if (scl <= t.bus_freq_hz)
 			goto scgd_find;
 	}
 	dev_err(dev, "it is impossible to calculate best SCL\n");
@@ -317,7 +320,7 @@ static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv, struct i2c_timin
 
 scgd_find:
 	dev_dbg(dev, "clk %d/%d(%lu), round %u, CDF:0x%x, SCGD: 0x%x\n",
-		scl, t->bus_freq_hz, rate, round, cdf, scgd);
+		scl, t.bus_freq_hz, rate, round, cdf, scgd);
 
 	/* keep icccr value */
 	priv->icccr = scgd << cdf_width | cdf;
@@ -920,7 +923,6 @@ static int rcar_i2c_probe(struct platform_device *pdev)
 	struct rcar_i2c_priv *priv;
 	struct i2c_adapter *adap;
 	struct device *dev = &pdev->dev;
-	struct i2c_timings i2c_t;
 	int ret;
 
 	/* Otherwise logic will break because some bytes must always use PIO */
@@ -957,8 +959,6 @@ static int rcar_i2c_probe(struct platform_device *pdev)
 	i2c_set_adapdata(adap, priv);
 	strlcpy(adap->name, pdev->name, sizeof(adap->name));
 
-	i2c_parse_fw_timings(dev, &i2c_t, false);
-
 	/* Init DMA */
 	sg_init_table(&priv->sg, 1);
 	priv->dma_direction = DMA_NONE;
@@ -967,7 +967,7 @@ static int rcar_i2c_probe(struct platform_device *pdev)
 	/* Activate device for clock calculation */
 	pm_runtime_enable(dev);
 	pm_runtime_get_sync(dev);
-	ret = rcar_i2c_clock_calculate(priv, &i2c_t);
+	ret = rcar_i2c_clock_calculate(priv);
 	if (ret < 0)
 		goto out_pm_put;
 
diff --git a/drivers/i2c/busses/i2c-riic.c b/drivers/i2c/busses/i2c-riic.c
index 8004148..4eccc0f 100644
--- a/drivers/i2c/busses/i2c-riic.c
+++ b/drivers/i2c/busses/i2c-riic.c
@@ -287,10 +287,10 @@ static int riic_init_hw(struct riic_dev *riic, struct i2c_timings *t)
 
 	pm_runtime_get_sync(riic->adapter.dev.parent);
 
-	if (t->bus_freq_hz > 400000) {
+	if (t->bus_freq_hz > I2C_MAX_FAST_MODE_FREQ) {
 		dev_err(&riic->adapter.dev,
-			"unsupported bus speed (%dHz). 400000 max\n",
-			t->bus_freq_hz);
+			"unsupported bus speed (%dHz). %d max\n",
+			t->bus_freq_hz, I2C_MAX_FAST_MODE_FREQ);
 		ret = -EINVAL;
 		goto out;
 	}
diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index 1a33007..73272d4 100644
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -539,9 +539,9 @@ static irqreturn_t rk3x_i2c_irq(int irqno, void *dev_id)
  */
 static const struct i2c_spec_values *rk3x_i2c_get_spec(unsigned int speed)
 {
-	if (speed <= 100000)
+	if (speed <= I2C_MAX_STANDARD_MODE_FREQ)
 		return &standard_mode_spec;
-	else if (speed <= 400000)
+	else if (speed <= I2C_MAX_FAST_MODE_FREQ)
 		return &fast_mode_spec;
 	else
 		return &fast_mode_plus_spec;
@@ -578,8 +578,8 @@ static int rk3x_i2c_v0_calc_timings(unsigned long clk_rate,
 	int ret = 0;
 
 	/* Only support standard-mode and fast-mode */
-	if (WARN_ON(t->bus_freq_hz > 400000))
-		t->bus_freq_hz = 400000;
+	if (WARN_ON(t->bus_freq_hz > I2C_MAX_FAST_MODE_FREQ))
+		t->bus_freq_hz = I2C_MAX_FAST_MODE_FREQ;
 
 	/* prevent scl_rate_khz from becoming 0 */
 	if (WARN_ON(t->bus_freq_hz < 1000))
@@ -758,8 +758,8 @@ static int rk3x_i2c_v1_calc_timings(unsigned long clk_rate,
 	int ret = 0;
 
 	/* Support standard-mode, fast-mode and fast-mode plus */
-	if (WARN_ON(t->bus_freq_hz > 1000000))
-		t->bus_freq_hz = 1000000;
+	if (WARN_ON(t->bus_freq_hz > I2C_MAX_FAST_MODE_PLUS_FREQ))
+		t->bus_freq_hz = I2C_MAX_FAST_MODE_PLUS_FREQ;
 
 	/* prevent scl_rate_khz from becoming 0 */
 	if (WARN_ON(t->bus_freq_hz < 1000))
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index c98ef4c..5a5638e 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -835,11 +835,11 @@ static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got)
 	int freq;
 
 	i2c->clkrate = clkin;
-	clkin /= 1000;		/* clkin now in KHz */
+	clkin /= 1000;	/* clkin now in KHz */
 
 	dev_dbg(i2c->dev, "pdata desired frequency %lu\n", pdata->frequency);
 
-	target_frequency = pdata->frequency ? pdata->frequency : 100000;
+	target_frequency = pdata->frequency ?: I2C_MAX_STANDARD_MODE_FREQ;
 
 	target_frequency /= 1000; /* Target frequency now in KHz */
 
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index 82b3b79..d83ca40 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -145,9 +145,6 @@ struct sh_mobile_dt_config {
 
 #define IIC_FLAG_HAS_ICIC67	(1 << 0)
 
-#define STANDARD_MODE		100000
-#define FAST_MODE		400000
-
 /* Register offsets */
 #define ICDR			0x00
 #define ICCR			0x04
@@ -270,11 +267,11 @@ static int sh_mobile_i2c_init(struct sh_mobile_i2c_data *pd)
 
 	i2c_clk_khz = clk_get_rate(pd->clk) / 1000 / pd->clks_per_count;
 
-	if (pd->bus_speed == STANDARD_MODE) {
+	if (pd->bus_speed == I2C_MAX_STANDARD_MODE_FREQ) {
 		tLOW	= 47;	/* tLOW = 4.7 us */
 		tHIGH	= 40;	/* tHD;STA = tHIGH = 4.0 us */
 		tf	= 3;	/* tf = 0.3 us */
-	} else if (pd->bus_speed == FAST_MODE) {
+	} else if (pd->bus_speed == I2C_MAX_FAST_MODE_FREQ) {
 		tLOW	= 13;	/* tLOW = 1.3 us */
 		tHIGH	= 6;	/* tHD;STA = tHIGH = 0.6 us */
 		tf	= 3;	/* tf = 0.3 us */
@@ -851,7 +848,7 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
 		return PTR_ERR(pd->reg);
 
 	ret = of_property_read_u32(dev->dev.of_node, "clock-frequency", &bus_speed);
-	pd->bus_speed = (ret || !bus_speed) ? STANDARD_MODE : bus_speed;
+	pd->bus_speed = (ret || !bus_speed) ? I2C_MAX_STANDARD_MODE_FREQ : bus_speed;
 	pd->clks_per_count = 1;
 
 	/* Newer variants come with two new bits in ICIC */
diff --git a/drivers/i2c/busses/i2c-sirf.c b/drivers/i2c/busses/i2c-sirf.c
index fb7a046..a459e00 100644
--- a/drivers/i2c/busses/i2c-sirf.c
+++ b/drivers/i2c/busses/i2c-sirf.c
@@ -62,7 +62,6 @@
 #define SIRFSOC_I2C_STOP		BIT(6)
 #define SIRFSOC_I2C_START		BIT(7)
 
-#define SIRFSOC_I2C_DEFAULT_SPEED 100000
 #define SIRFSOC_I2C_ERR_NOACK      1
 #define SIRFSOC_I2C_ERR_TIMEOUT    2
 
@@ -353,7 +352,7 @@ static int i2c_sirfsoc_probe(struct platform_device *pdev)
 	err = of_property_read_u32(pdev->dev.of_node,
 		"clock-frequency", &bitrate);
 	if (err < 0)
-		bitrate = SIRFSOC_I2C_DEFAULT_SPEED;
+		bitrate = I2C_MAX_STANDARD_MODE_FREQ;
 
 	/*
 	 * Due to some hardware design issues, we need to tune the formula.
diff --git a/drivers/i2c/busses/i2c-sprd.c b/drivers/i2c/busses/i2c-sprd.c
index b432e75..123a42b 100644
--- a/drivers/i2c/busses/i2c-sprd.c
+++ b/drivers/i2c/busses/i2c-sprd.c
@@ -337,9 +337,9 @@ static void sprd_i2c_set_clk(struct sprd_i2c *i2c_dev, u32 freq)
 	writel(div1, i2c_dev->base + ADDR_DVD1);
 
 	/* Start hold timing = hold time(us) * source clock */
-	if (freq == 400000)
+	if (freq == I2C_MAX_FAST_MODE_FREQ)
 		writel((6 * apb_clk) / 10000000, i2c_dev->base + ADDR_STA0_DVD);
-	else if (freq == 100000)
+	else if (freq == I2C_MAX_STANDARD_MODE_FREQ)
 		writel((4 * apb_clk) / 1000000, i2c_dev->base + ADDR_STA0_DVD);
 }
 
@@ -502,7 +502,7 @@ static int sprd_i2c_probe(struct platform_device *pdev)
 	snprintf(i2c_dev->adap.name, sizeof(i2c_dev->adap.name),
 		 "%s", "sprd-i2c");
 
-	i2c_dev->bus_freq = 100000;
+	i2c_dev->bus_freq = I2C_MAX_STANDARD_MODE_FREQ;
 	i2c_dev->adap.owner = THIS_MODULE;
 	i2c_dev->dev = dev;
 	i2c_dev->adap.retries = 3;
@@ -516,7 +516,8 @@ static int sprd_i2c_probe(struct platform_device *pdev)
 		i2c_dev->bus_freq = prop;
 
 	/* We only support 100k and 400k now, otherwise will return error. */
-	if (i2c_dev->bus_freq != 100000 && i2c_dev->bus_freq != 400000)
+	if (i2c_dev->bus_freq != I2C_MAX_STANDARD_MODE_FREQ &&
+	    i2c_dev->bus_freq != I2C_MAX_FAST_MODE_FREQ)
 		return -EINVAL;
 
 	ret = sprd_i2c_clk_init(i2c_dev);
diff --git a/drivers/i2c/busses/i2c-st.c b/drivers/i2c/busses/i2c-st.c
index f7f7b5b..faa81a9 100644
--- a/drivers/i2c/busses/i2c-st.c
+++ b/drivers/i2c/busses/i2c-st.c
@@ -213,7 +213,7 @@ static inline void st_i2c_clr_bits(void __iomem *reg, u32 mask)
  */
 static struct st_i2c_timings i2c_timings[] = {
 	[I2C_MODE_STANDARD] = {
-		.rate			= 100000,
+		.rate			= I2C_MAX_STANDARD_MODE_FREQ,
 		.rep_start_hold		= 4400,
 		.rep_start_setup	= 5170,
 		.start_hold		= 4400,
@@ -222,7 +222,7 @@ static struct st_i2c_timings i2c_timings[] = {
 		.bus_free_time		= 5170,
 	},
 	[I2C_MODE_FAST] = {
-		.rate			= 400000,
+		.rate			= I2C_MAX_FAST_MODE_FREQ,
 		.rep_start_hold		= 660,
 		.rep_start_setup	= 660,
 		.start_hold		= 660,
@@ -836,7 +836,7 @@ static int st_i2c_probe(struct platform_device *pdev)
 
 	i2c_dev->mode = I2C_MODE_STANDARD;
 	ret = of_property_read_u32(np, "clock-frequency", &clk_rate);
-	if ((!ret) && (clk_rate == 400000))
+	if (!ret && (clk_rate == I2C_MAX_FAST_MODE_FREQ))
 		i2c_dev->mode = I2C_MODE_FAST;
 
 	i2c_dev->dev = &pdev->dev;
diff --git a/drivers/i2c/busses/i2c-stm32f4.c b/drivers/i2c/busses/i2c-stm32f4.c
index ba600d7..d6a69df 100644
--- a/drivers/i2c/busses/i2c-stm32f4.c
+++ b/drivers/i2c/busses/i2c-stm32f4.c
@@ -232,10 +232,10 @@ static void stm32f4_i2c_set_speed_mode(struct stm32f4_i2c_dev *i2c_dev)
 		 * In standard mode:
 		 * t_scl_high = t_scl_low = CCR * I2C parent clk period
 		 * So to reach 100 kHz, we have:
-		 * CCR = I2C parent rate / 100 kHz >> 1
+		 * CCR = I2C parent rate / (100 kHz * 2)
 		 *
 		 * For example with parent rate = 2 MHz:
-		 * CCR = 2000000 / (100000 << 1) = 10
+		 * CCR = 2000000 / (100000 * 2) = 10
 		 * t_scl_high = t_scl_low = 10 * (1 / 2000000) = 5000 ns
 		 * t_scl_high + t_scl_low = 10000 ns so 100 kHz is reached
 		 *
@@ -243,7 +243,7 @@ static void stm32f4_i2c_set_speed_mode(struct stm32f4_i2c_dev *i2c_dev)
 		 * parent rate is not higher than 46 MHz . As a result val
 		 * is at most 8 bits wide and so fits into the CCR bits [11:0].
 		 */
-		val = i2c_dev->parent_rate / (100000 << 1);
+		val = i2c_dev->parent_rate / (I2C_MAX_STANDARD_MODE_FREQ * 2);
 	} else {
 		/*
 		 * In fast mode, we compute CCR with duty = 0 as with low
@@ -263,7 +263,7 @@ static void stm32f4_i2c_set_speed_mode(struct stm32f4_i2c_dev *i2c_dev)
 		 * parent rate is not higher than 46 MHz . As a result val
 		 * is at most 6 bits wide and so fits into the CCR bits [11:0].
 		 */
-		val = DIV_ROUND_UP(i2c_dev->parent_rate, 400000 * 3);
+		val = DIV_ROUND_UP(i2c_dev->parent_rate, I2C_MAX_FAST_MODE_FREQ * 3);
 
 		/* Select Fast mode */
 		ccr |= STM32F4_I2C_CCR_FS;
@@ -807,7 +807,7 @@ static int stm32f4_i2c_probe(struct platform_device *pdev)
 
 	i2c_dev->speed = STM32_I2C_SPEED_STANDARD;
 	ret = of_property_read_u32(np, "clock-frequency", &clk_rate);
-	if (!ret && clk_rate >= 400000)
+	if (!ret && clk_rate >= I2C_MAX_FAST_MODE_FREQ)
 		i2c_dev->speed = STM32_I2C_SPEED_FAST;
 
 	i2c_dev->dev = &pdev->dev;
diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index 5c3e8ac..330ffed 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -29,6 +29,7 @@
 #include <linux/platform_device.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/pm_runtime.h>
+#include <linux/pm_wakeirq.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 #include <linux/slab.h>
@@ -49,6 +50,7 @@
 
 /* STM32F7 I2C control 1 */
 #define STM32F7_I2C_CR1_PECEN			BIT(23)
+#define STM32F7_I2C_CR1_WUPEN			BIT(18)
 #define STM32F7_I2C_CR1_SBC			BIT(16)
 #define STM32F7_I2C_CR1_RXDMAEN			BIT(15)
 #define STM32F7_I2C_CR1_TXDMAEN			BIT(14)
@@ -174,7 +176,6 @@
  * @cr2: Control register 2
  * @oar1: Own address 1 register
  * @oar2: Own address 2 register
- * @pecr: PEC register
  * @tmgr: Timing register
  */
 struct stm32f7_i2c_regs {
@@ -182,7 +183,6 @@ struct stm32f7_i2c_regs {
 	u32 cr2;
 	u32 oar1;
 	u32 oar2;
-	u32 pecr;
 	u32 tmgr;
 };
 
@@ -221,6 +221,7 @@ struct stm32f7_i2c_spec {
  * @fall_time: Fall time (ns)
  * @dnf: Digital filter coefficient (0-16)
  * @analog_filter: Analog filter delay (On/Off)
+ * @fmp_clr_offset: Fast Mode Plus clear register offset from set register
  */
 struct stm32f7_i2c_setup {
 	enum stm32_i2c_speed speed;
@@ -230,6 +231,7 @@ struct stm32f7_i2c_setup {
 	u32 fall_time;
 	u8 dnf;
 	bool analog_filter;
+	u32 fmp_clr_offset;
 };
 
 /**
@@ -301,6 +303,10 @@ struct stm32f7_i2c_msg {
  * @dma: dma data
  * @use_dma: boolean to know if dma is used in the current transfer
  * @regmap: holds SYSCFG phandle for Fast Mode Plus bits
+ * @fmp_sreg: register address for setting Fast Mode Plus bits
+ * @fmp_creg: register address for clearing Fast Mode Plus bits
+ * @fmp_mask: mask for Fast Mode Plus bits in set register
+ * @wakeup_src: boolean to know if the device is a wakeup source
  */
 struct stm32f7_i2c_dev {
 	struct i2c_adapter adap;
@@ -323,6 +329,10 @@ struct stm32f7_i2c_dev {
 	struct stm32_i2c_dma *dma;
 	bool use_dma;
 	struct regmap *regmap;
+	u32 fmp_sreg;
+	u32 fmp_creg;
+	u32 fmp_mask;
+	bool wakeup_src;
 };
 
 /*
@@ -334,9 +344,9 @@ struct stm32f7_i2c_dev {
  */
 static struct stm32f7_i2c_spec i2c_specs[] = {
 	[STM32_I2C_SPEED_STANDARD] = {
-		.rate = 100000,
-		.rate_min = 80000,
-		.rate_max = 100000,
+		.rate = I2C_MAX_STANDARD_MODE_FREQ,
+		.rate_min = I2C_MAX_STANDARD_MODE_FREQ * 8 / 10,	/* 80% */
+		.rate_max = I2C_MAX_STANDARD_MODE_FREQ,
 		.fall_max = 300,
 		.rise_max = 1000,
 		.hddat_min = 0,
@@ -346,9 +356,9 @@ static struct stm32f7_i2c_spec i2c_specs[] = {
 		.h_min = 4000,
 	},
 	[STM32_I2C_SPEED_FAST] = {
-		.rate = 400000,
-		.rate_min = 320000,
-		.rate_max = 400000,
+		.rate = I2C_MAX_FAST_MODE_FREQ,
+		.rate_min = I2C_MAX_FAST_MODE_FREQ * 8 / 10,		/* 80% */
+		.rate_max = I2C_MAX_FAST_MODE_FREQ,
 		.fall_max = 300,
 		.rise_max = 300,
 		.hddat_min = 0,
@@ -358,9 +368,9 @@ static struct stm32f7_i2c_spec i2c_specs[] = {
 		.h_min = 600,
 	},
 	[STM32_I2C_SPEED_FAST_PLUS] = {
-		.rate = 1000000,
-		.rate_min = 800000,
-		.rate_max = 1000000,
+		.rate = I2C_MAX_FAST_MODE_PLUS_FREQ,
+		.rate_min = I2C_MAX_FAST_MODE_PLUS_FREQ * 8 / 10,	/* 80% */
+		.rate_max = I2C_MAX_FAST_MODE_PLUS_FREQ,
 		.fall_max = 100,
 		.rise_max = 120,
 		.hddat_min = 0,
@@ -378,6 +388,14 @@ static const struct stm32f7_i2c_setup stm32f7_setup = {
 	.analog_filter = STM32F7_I2C_ANALOG_FILTER_ENABLE,
 };
 
+static const struct stm32f7_i2c_setup stm32mp15_setup = {
+	.rise_time = STM32F7_I2C_RISE_TIME_DEFAULT,
+	.fall_time = STM32F7_I2C_FALL_TIME_DEFAULT,
+	.dnf = STM32F7_I2C_DNF_DEFAULT,
+	.analog_filter = STM32F7_I2C_ANALOG_FILTER_ENABLE,
+	.fmp_clr_offset = 0x40,
+};
+
 static inline void stm32f7_i2c_set_bits(void __iomem *reg, u32 mask)
 {
 	writel_relaxed(readl_relaxed(reg) | mask, reg);
@@ -592,8 +610,25 @@ static int stm32f7_i2c_compute_timing(struct stm32f7_i2c_dev *i2c_dev,
 static int stm32f7_i2c_setup_timing(struct stm32f7_i2c_dev *i2c_dev,
 				    struct stm32f7_i2c_setup *setup)
 {
+	struct i2c_timings timings, *t = &timings;
 	int ret = 0;
 
+	t->bus_freq_hz = I2C_MAX_STANDARD_MODE_FREQ;
+	t->scl_rise_ns = i2c_dev->setup.rise_time;
+	t->scl_fall_ns = i2c_dev->setup.fall_time;
+
+	i2c_parse_fw_timings(i2c_dev->dev, t, false);
+
+	if (t->bus_freq_hz >= I2C_MAX_FAST_MODE_PLUS_FREQ)
+		i2c_dev->speed = STM32_I2C_SPEED_FAST_PLUS;
+	else if (t->bus_freq_hz >= I2C_MAX_FAST_MODE_FREQ)
+		i2c_dev->speed = STM32_I2C_SPEED_FAST;
+	else
+		i2c_dev->speed = STM32_I2C_SPEED_STANDARD;
+
+	i2c_dev->setup.rise_time = t->scl_rise_ns;
+	i2c_dev->setup.fall_time = t->scl_fall_ns;
+
 	setup->speed = i2c_dev->speed;
 	setup->speed_freq = i2c_specs[setup->speed].rate;
 	setup->clock_src = clk_get_rate(i2c_dev->clk);
@@ -1691,6 +1726,24 @@ static int stm32f7_i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
 	return ret;
 }
 
+static void stm32f7_i2c_enable_wakeup(struct stm32f7_i2c_dev *i2c_dev,
+				      bool enable)
+{
+	void __iomem *base = i2c_dev->base;
+	u32 mask = STM32F7_I2C_CR1_WUPEN;
+
+	if (!i2c_dev->wakeup_src)
+		return;
+
+	if (enable) {
+		device_set_wakeup_enable(i2c_dev->dev, true);
+		stm32f7_i2c_set_bits(base + STM32F7_I2C_CR1, mask);
+	} else {
+		device_set_wakeup_enable(i2c_dev->dev, false);
+		stm32f7_i2c_clr_bits(base + STM32F7_I2C_CR1, mask);
+	}
+}
+
 static int stm32f7_i2c_reg_slave(struct i2c_client *slave)
 {
 	struct stm32f7_i2c_dev *i2c_dev = i2c_get_adapdata(slave->adapter);
@@ -1717,6 +1770,9 @@ static int stm32f7_i2c_reg_slave(struct i2c_client *slave)
 	if (ret < 0)
 		return ret;
 
+	if (!stm32f7_i2c_is_slave_registered(i2c_dev))
+		stm32f7_i2c_enable_wakeup(i2c_dev, true);
+
 	if (id == 0) {
 		/* Configure Own Address 1 */
 		oar1 = readl_relaxed(i2c_dev->base + STM32F7_I2C_OAR1);
@@ -1758,6 +1814,9 @@ static int stm32f7_i2c_reg_slave(struct i2c_client *slave)
 
 	ret = 0;
 pm_free:
+	if (!stm32f7_i2c_is_slave_registered(i2c_dev))
+		stm32f7_i2c_enable_wakeup(i2c_dev, false);
+
 	pm_runtime_mark_last_busy(dev);
 	pm_runtime_put_autosuspend(dev);
 
@@ -1791,8 +1850,10 @@ static int stm32f7_i2c_unreg_slave(struct i2c_client *slave)
 
 	i2c_dev->slave[id] = NULL;
 
-	if (!(stm32f7_i2c_is_slave_registered(i2c_dev)))
+	if (!stm32f7_i2c_is_slave_registered(i2c_dev)) {
 		stm32f7_i2c_disable_irq(i2c_dev, STM32F7_I2C_ALL_IRQ_MASK);
+		stm32f7_i2c_enable_wakeup(i2c_dev, false);
+	}
 
 	pm_runtime_mark_last_busy(i2c_dev->dev);
 	pm_runtime_put_autosuspend(i2c_dev->dev);
@@ -1800,28 +1861,51 @@ static int stm32f7_i2c_unreg_slave(struct i2c_client *slave)
 	return 0;
 }
 
+static int stm32f7_i2c_write_fm_plus_bits(struct stm32f7_i2c_dev *i2c_dev,
+					  bool enable)
+{
+	int ret;
+
+	if (i2c_dev->speed != STM32_I2C_SPEED_FAST_PLUS ||
+	    IS_ERR_OR_NULL(i2c_dev->regmap))
+		/* Optional */
+		return 0;
+
+	if (i2c_dev->fmp_sreg == i2c_dev->fmp_creg)
+		ret = regmap_update_bits(i2c_dev->regmap,
+					 i2c_dev->fmp_sreg,
+					 i2c_dev->fmp_mask,
+					 enable ? i2c_dev->fmp_mask : 0);
+	else
+		ret = regmap_write(i2c_dev->regmap,
+				   enable ? i2c_dev->fmp_sreg :
+					    i2c_dev->fmp_creg,
+				   i2c_dev->fmp_mask);
+
+	return ret;
+}
+
 static int stm32f7_i2c_setup_fm_plus_bits(struct platform_device *pdev,
 					  struct stm32f7_i2c_dev *i2c_dev)
 {
 	struct device_node *np = pdev->dev.of_node;
 	int ret;
-	u32 reg, mask;
 
 	i2c_dev->regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg-fmp");
-	if (IS_ERR(i2c_dev->regmap)) {
+	if (IS_ERR(i2c_dev->regmap))
 		/* Optional */
 		return 0;
-	}
 
-	ret = of_property_read_u32_index(np, "st,syscfg-fmp", 1, &reg);
+	ret = of_property_read_u32_index(np, "st,syscfg-fmp", 1,
+					 &i2c_dev->fmp_sreg);
 	if (ret)
 		return ret;
 
-	ret = of_property_read_u32_index(np, "st,syscfg-fmp", 2, &mask);
-	if (ret)
-		return ret;
+	i2c_dev->fmp_creg = i2c_dev->fmp_sreg +
+			       i2c_dev->setup.fmp_clr_offset;
 
-	return regmap_update_bits(i2c_dev->regmap, reg, mask, mask);
+	return of_property_read_u32_index(np, "st,syscfg-fmp", 2,
+					  &i2c_dev->fmp_mask);
 }
 
 static u32 stm32f7_i2c_func(struct i2c_adapter *adap)
@@ -1847,7 +1931,6 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
 	struct stm32f7_i2c_dev *i2c_dev;
 	const struct stm32f7_i2c_setup *setup;
 	struct resource *res;
-	u32 clk_rate, rise_time, fall_time;
 	struct i2c_adapter *adap;
 	struct reset_control *rst;
 	dma_addr_t phy_addr;
@@ -1879,6 +1962,9 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
 		return irq_error ? : -ENOENT;
 	}
 
+	i2c_dev->wakeup_src = of_property_read_bool(pdev->dev.of_node,
+						    "wakeup-source");
+
 	i2c_dev->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(i2c_dev->clk)) {
 		dev_err(&pdev->dev, "Error: Missing controller clock\n");
@@ -1891,20 +1977,6 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	i2c_dev->speed = STM32_I2C_SPEED_STANDARD;
-	ret = device_property_read_u32(&pdev->dev, "clock-frequency",
-				       &clk_rate);
-	if (!ret && clk_rate >= 1000000) {
-		i2c_dev->speed = STM32_I2C_SPEED_FAST_PLUS;
-		ret = stm32f7_i2c_setup_fm_plus_bits(pdev, i2c_dev);
-		if (ret)
-			goto clk_free;
-	} else if (!ret && clk_rate >= 400000) {
-		i2c_dev->speed = STM32_I2C_SPEED_FAST;
-	} else if (!ret && clk_rate >= 100000) {
-		i2c_dev->speed = STM32_I2C_SPEED_STANDARD;
-	}
-
 	rst = devm_reset_control_get(&pdev->dev, NULL);
 	if (IS_ERR(rst)) {
 		dev_err(&pdev->dev, "Error: Missing controller reset\n");
@@ -1944,20 +2016,19 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
 	}
 	i2c_dev->setup = *setup;
 
-	ret = device_property_read_u32(i2c_dev->dev, "i2c-scl-rising-time-ns",
-				       &rise_time);
-	if (!ret)
-		i2c_dev->setup.rise_time = rise_time;
-
-	ret = device_property_read_u32(i2c_dev->dev, "i2c-scl-falling-time-ns",
-				       &fall_time);
-	if (!ret)
-		i2c_dev->setup.fall_time = fall_time;
-
 	ret = stm32f7_i2c_setup_timing(i2c_dev, &i2c_dev->setup);
 	if (ret)
 		goto clk_free;
 
+	if (i2c_dev->speed == STM32_I2C_SPEED_FAST_PLUS) {
+		ret = stm32f7_i2c_setup_fm_plus_bits(pdev, i2c_dev);
+		if (ret)
+			goto clk_free;
+		ret = stm32f7_i2c_write_fm_plus_bits(i2c_dev, true);
+		if (ret)
+			goto clk_free;
+	}
+
 	adap = &i2c_dev->adap;
 	i2c_set_adapdata(adap, i2c_dev);
 	snprintf(adap->name, sizeof(adap->name), "STM32F7 I2C(%pa)",
@@ -1982,7 +2053,17 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
 		if (ret != -EPROBE_DEFER)
 			dev_err(&pdev->dev,
 				"Failed to request dma error %i\n", ret);
-		goto clk_free;
+		goto fmp_clear;
+	}
+
+	if (i2c_dev->wakeup_src) {
+		device_set_wakeup_capable(i2c_dev->dev, true);
+
+		ret = dev_pm_set_wake_irq(i2c_dev->dev, irq_event);
+		if (ret) {
+			dev_err(i2c_dev->dev, "Failed to set wake up irq\n");
+			goto clr_wakeup_capable;
+		}
 	}
 
 	platform_set_drvdata(pdev, i2c_dev);
@@ -2014,11 +2095,21 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
 	pm_runtime_set_suspended(i2c_dev->dev);
 	pm_runtime_dont_use_autosuspend(i2c_dev->dev);
 
+	if (i2c_dev->wakeup_src)
+		dev_pm_clear_wake_irq(i2c_dev->dev);
+
+clr_wakeup_capable:
+	if (i2c_dev->wakeup_src)
+		device_set_wakeup_capable(i2c_dev->dev, false);
+
 	if (i2c_dev->dma) {
 		stm32_i2c_dma_free(i2c_dev->dma);
 		i2c_dev->dma = NULL;
 	}
 
+fmp_clear:
+	stm32f7_i2c_write_fm_plus_bits(i2c_dev, false);
+
 clk_free:
 	clk_disable_unprepare(i2c_dev->clk);
 
@@ -2032,6 +2123,15 @@ static int stm32f7_i2c_remove(struct platform_device *pdev)
 	i2c_del_adapter(&i2c_dev->adap);
 	pm_runtime_get_sync(i2c_dev->dev);
 
+	if (i2c_dev->wakeup_src) {
+		dev_pm_clear_wake_irq(i2c_dev->dev);
+		/*
+		 * enforce that wakeup is disabled and that the device
+		 * is marked as non wakeup capable
+		 */
+		device_init_wakeup(i2c_dev->dev, false);
+	}
+
 	pm_runtime_put_noidle(i2c_dev->dev);
 	pm_runtime_disable(i2c_dev->dev);
 	pm_runtime_set_suspended(i2c_dev->dev);
@@ -2042,6 +2142,8 @@ static int stm32f7_i2c_remove(struct platform_device *pdev)
 		i2c_dev->dma = NULL;
 	}
 
+	stm32f7_i2c_write_fm_plus_bits(i2c_dev, false);
+
 	clk_disable_unprepare(i2c_dev->clk);
 
 	return 0;
@@ -2073,8 +2175,8 @@ static int __maybe_unused stm32f7_i2c_runtime_resume(struct device *dev)
 	return 0;
 }
 
-static int __maybe_unused
-stm32f7_i2c_regs_backup(struct stm32f7_i2c_dev *i2c_dev)
+#ifdef CONFIG_PM_SLEEP
+static int stm32f7_i2c_regs_backup(struct stm32f7_i2c_dev *i2c_dev)
 {
 	int ret;
 	struct stm32f7_i2c_regs *backup_regs = &i2c_dev->backup_regs;
@@ -2087,16 +2189,15 @@ stm32f7_i2c_regs_backup(struct stm32f7_i2c_dev *i2c_dev)
 	backup_regs->cr2 = readl_relaxed(i2c_dev->base + STM32F7_I2C_CR2);
 	backup_regs->oar1 = readl_relaxed(i2c_dev->base + STM32F7_I2C_OAR1);
 	backup_regs->oar2 = readl_relaxed(i2c_dev->base + STM32F7_I2C_OAR2);
-	backup_regs->pecr = readl_relaxed(i2c_dev->base + STM32F7_I2C_PECR);
 	backup_regs->tmgr = readl_relaxed(i2c_dev->base + STM32F7_I2C_TIMINGR);
+	stm32f7_i2c_write_fm_plus_bits(i2c_dev, false);
 
 	pm_runtime_put_sync(i2c_dev->dev);
 
 	return ret;
 }
 
-static int __maybe_unused
-stm32f7_i2c_regs_restore(struct stm32f7_i2c_dev *i2c_dev)
+static int stm32f7_i2c_regs_restore(struct stm32f7_i2c_dev *i2c_dev)
 {
 	u32 cr1;
 	int ret;
@@ -2120,48 +2221,55 @@ stm32f7_i2c_regs_restore(struct stm32f7_i2c_dev *i2c_dev)
 	writel_relaxed(backup_regs->cr2, i2c_dev->base + STM32F7_I2C_CR2);
 	writel_relaxed(backup_regs->oar1, i2c_dev->base + STM32F7_I2C_OAR1);
 	writel_relaxed(backup_regs->oar2, i2c_dev->base + STM32F7_I2C_OAR2);
-	writel_relaxed(backup_regs->pecr, i2c_dev->base + STM32F7_I2C_PECR);
+	stm32f7_i2c_write_fm_plus_bits(i2c_dev, true);
 
 	pm_runtime_put_sync(i2c_dev->dev);
 
 	return ret;
 }
 
-static int __maybe_unused stm32f7_i2c_suspend(struct device *dev)
+static int stm32f7_i2c_suspend(struct device *dev)
 {
 	struct stm32f7_i2c_dev *i2c_dev = dev_get_drvdata(dev);
 	int ret;
 
 	i2c_mark_adapter_suspended(&i2c_dev->adap);
-	ret = stm32f7_i2c_regs_backup(i2c_dev);
-	if (ret < 0) {
-		i2c_mark_adapter_resumed(&i2c_dev->adap);
-		return ret;
-	}
 
-	pinctrl_pm_select_sleep_state(dev);
-	pm_runtime_force_suspend(dev);
+	if (!device_may_wakeup(dev) && !dev->power.wakeup_path) {
+		ret = stm32f7_i2c_regs_backup(i2c_dev);
+		if (ret < 0) {
+			i2c_mark_adapter_resumed(&i2c_dev->adap);
+			return ret;
+		}
+
+		pinctrl_pm_select_sleep_state(dev);
+		pm_runtime_force_suspend(dev);
+	}
 
 	return 0;
 }
 
-static int __maybe_unused stm32f7_i2c_resume(struct device *dev)
+static int stm32f7_i2c_resume(struct device *dev)
 {
 	struct stm32f7_i2c_dev *i2c_dev = dev_get_drvdata(dev);
 	int ret;
 
-	ret = pm_runtime_force_resume(dev);
-	if (ret < 0)
-		return ret;
-	pinctrl_pm_select_default_state(dev);
+	if (!device_may_wakeup(dev) && !dev->power.wakeup_path) {
+		ret = pm_runtime_force_resume(dev);
+		if (ret < 0)
+			return ret;
+		pinctrl_pm_select_default_state(dev);
 
-	ret = stm32f7_i2c_regs_restore(i2c_dev);
-	if (ret < 0)
-		return ret;
+		ret = stm32f7_i2c_regs_restore(i2c_dev);
+		if (ret < 0)
+			return ret;
+	}
+
 	i2c_mark_adapter_resumed(&i2c_dev->adap);
 
 	return 0;
 }
+#endif
 
 static const struct dev_pm_ops stm32f7_i2c_pm_ops = {
 	SET_RUNTIME_PM_OPS(stm32f7_i2c_runtime_suspend,
@@ -2171,6 +2279,7 @@ static const struct dev_pm_ops stm32f7_i2c_pm_ops = {
 
 static const struct of_device_id stm32f7_i2c_match[] = {
 	{ .compatible = "st,stm32f7-i2c", .data = &stm32f7_setup},
+	{ .compatible = "st,stm32mp15-i2c", .data = &stm32mp15_setup},
 	{},
 };
 MODULE_DEVICE_TABLE(of, stm32f7_i2c_match);
diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c
index 42e0a53..ba6b60c 100644
--- a/drivers/i2c/busses/i2c-stu300.c
+++ b/drivers/i2c/busses/i2c-stu300.c
@@ -132,7 +132,7 @@ enum stu300_error {
 #define NUM_ADDR_RESEND_ATTEMPTS 12
 
 /* I2C clock speed, in Hz 0-400kHz*/
-static unsigned int scl_frequency = 100000;
+static unsigned int scl_frequency = I2C_MAX_STANDARD_MODE_FREQ;
 module_param(scl_frequency, uint,  0644);
 
 /**
@@ -497,7 +497,7 @@ static int stu300_set_clk(struct stu300_dev *dev, unsigned long clkrate)
 	dev_dbg(&dev->pdev->dev, "Clock rate %lu Hz, I2C bus speed %d Hz "
 		"virtbase %p\n", clkrate, dev->speed, dev->virtbase);
 
-	if (dev->speed > 100000)
+	if (dev->speed > I2C_MAX_STANDARD_MODE_FREQ)
 		/* Fast Mode I2C */
 		val = ((clkrate/dev->speed) - 9)/3 + 1;
 	else
@@ -518,7 +518,7 @@ static int stu300_set_clk(struct stu300_dev *dev, unsigned long clkrate)
 		return -EINVAL;
 	}
 
-	if (dev->speed > 100000) {
+	if (dev->speed > I2C_MAX_STANDARD_MODE_FREQ) {
 		/* CC6..CC0 */
 		stu300_wr8((val & I2C_CCR_CC_MASK) | I2C_CCR_FMSM,
 			   dev->virtbase + I2C_CCR);
diff --git a/drivers/i2c/busses/i2c-sun6i-p2wi.c b/drivers/i2c/busses/i2c-sun6i-p2wi.c
index 7c07ce1..e5293f0 100644
--- a/drivers/i2c/busses/i2c-sun6i-p2wi.c
+++ b/drivers/i2c/busses/i2c-sun6i-p2wi.c
@@ -186,7 +186,7 @@ static int p2wi_probe(struct platform_device *pdev)
 	struct device_node *np = dev->of_node;
 	struct device_node *childnp;
 	unsigned long parent_clk_freq;
-	u32 clk_freq = 100000;
+	u32 clk_freq = I2C_MAX_STANDARD_MODE_FREQ;
 	struct resource *r;
 	struct p2wi *p2wi;
 	u32 slave_addr;
diff --git a/drivers/i2c/busses/i2c-synquacer.c b/drivers/i2c/busses/i2c-synquacer.c
index 8602679..9099d0a 100644
--- a/drivers/i2c/busses/i2c-synquacer.c
+++ b/drivers/i2c/busses/i2c-synquacer.c
@@ -67,10 +67,10 @@
 
 /* STANDARD MODE frequency */
 #define SYNQUACER_I2C_CLK_MASTER_STD(rate)			\
-	DIV_ROUND_UP(DIV_ROUND_UP((rate), 100000) - 2, 2)
+	DIV_ROUND_UP(DIV_ROUND_UP((rate), I2C_MAX_STANDARD_MODE_FREQ) - 2, 2)
 /* FAST MODE frequency */
 #define SYNQUACER_I2C_CLK_MASTER_FAST(rate)			\
-	DIV_ROUND_UP((DIV_ROUND_UP((rate), 400000) - 2) * 2, 3)
+	DIV_ROUND_UP((DIV_ROUND_UP((rate), I2C_MAX_FAST_MODE_FREQ) - 2) * 2, 3)
 
 /* (clkrate <= 18000000) */
 /* calculate the value of CS bits in CCR register on standard mode */
@@ -602,7 +602,7 @@ static int synquacer_i2c_probe(struct platform_device *pdev)
 	i2c->adapter.nr = pdev->id;
 	init_completion(&i2c->completion);
 
-	if (bus_speed < 400000)
+	if (bus_speed < I2C_MAX_FAST_MODE_FREQ)
 		i2c->speed_khz = SYNQUACER_I2C_SPEED_SM;
 	else
 		i2c->speed_khz = SYNQUACER_I2C_SPEED_FM;
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index cbc2ad4..8280ac7 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -123,10 +123,6 @@
 #define I2C_THIGH_SHIFT				8
 #define I2C_INTERFACE_TIMING_1			0x98
 
-#define I2C_STANDARD_MODE			100000
-#define I2C_FAST_MODE				400000
-#define I2C_FAST_PLUS_MODE			1000000
-
 /* Packet header size in bytes */
 #define I2C_PACKET_HEADER_SIZE			12
 
@@ -737,8 +733,8 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev, bool clk_reinit)
 					I2C_CLK_DIVISOR_STD_FAST_MODE_SHIFT;
 	i2c_writel(i2c_dev, clk_divisor, I2C_CLK_DIVISOR);
 
-	if (i2c_dev->bus_clk_rate > I2C_STANDARD_MODE &&
-	    i2c_dev->bus_clk_rate <= I2C_FAST_PLUS_MODE) {
+	if (i2c_dev->bus_clk_rate > I2C_MAX_STANDARD_MODE_FREQ &&
+	    i2c_dev->bus_clk_rate <= I2C_MAX_FAST_MODE_PLUS_FREQ) {
 		tlow = i2c_dev->hw->tlow_fast_fastplus_mode;
 		thigh = i2c_dev->hw->thigh_fast_fastplus_mode;
 		tsu_thd = i2c_dev->hw->setup_hold_time_fast_fast_plus_mode;
@@ -1000,14 +996,13 @@ tegra_i2c_poll_completion_timeout(struct tegra_i2c_dev *i2c_dev,
 	do {
 		u32 status = i2c_readl(i2c_dev, I2C_INT_STATUS);
 
-		if (status) {
+		if (status)
 			tegra_i2c_isr(i2c_dev->irq, i2c_dev);
 
-			if (completion_done(complete)) {
-				s64 delta = ktime_ms_delta(ktimeout, ktime);
+		if (completion_done(complete)) {
+			s64 delta = ktime_ms_delta(ktimeout, ktime);
 
-				return msecs_to_jiffies(delta) ?: 1;
-			}
+			return msecs_to_jiffies(delta) ?: 1;
 		}
 
 		ktime = ktime_get();
@@ -1034,14 +1029,18 @@ tegra_i2c_wait_completion_timeout(struct tegra_i2c_dev *i2c_dev,
 		disable_irq(i2c_dev->irq);
 
 		/*
-		 * There is a chance that completion may happen after IRQ
-		 * synchronization, which is done by disable_irq().
+		 * Under some rare circumstances (like running KASAN +
+		 * NFS root) CPU, which handles interrupt, may stuck in
+		 * uninterruptible state for a significant time.  In this
+		 * case we will get timeout if I2C transfer is running on
+		 * a sibling CPU, despite of IRQ being raised.
+		 *
+		 * In order to handle this rare condition, the IRQ status
+		 * needs to be checked after timeout.
 		 */
-		if (ret == 0 && completion_done(complete)) {
-			dev_warn(i2c_dev->dev,
-				 "completion done after timeout\n");
-			ret = 1;
-		}
+		if (ret == 0)
+			ret = tegra_i2c_poll_completion_timeout(i2c_dev,
+								complete, 0);
 	}
 
 	return ret;
@@ -1220,6 +1219,15 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 		time_left = tegra_i2c_wait_completion_timeout(
 				i2c_dev, &i2c_dev->dma_complete, xfer_time);
 
+		/*
+		 * Synchronize DMA first, since dmaengine_terminate_sync()
+		 * performs synchronization after the transfer's termination
+		 * and we want to get a completion if transfer succeeded.
+		 */
+		dmaengine_synchronize(i2c_dev->msg_read ?
+				      i2c_dev->rx_dma_chan :
+				      i2c_dev->tx_dma_chan);
+
 		dmaengine_terminate_sync(i2c_dev->msg_read ?
 					 i2c_dev->rx_dma_chan :
 					 i2c_dev->tx_dma_chan);
@@ -1341,7 +1349,7 @@ static void tegra_i2c_parse_dt(struct tegra_i2c_dev *i2c_dev)
 	ret = of_property_read_u32(np, "clock-frequency",
 				   &i2c_dev->bus_clk_rate);
 	if (ret)
-		i2c_dev->bus_clk_rate = 100000; /* default clock rate */
+		i2c_dev->bus_clk_rate = I2C_MAX_STANDARD_MODE_FREQ; /* default clock rate */
 
 	multi_mode = of_property_read_bool(np, "multi-master");
 	i2c_dev->is_multimaster_mode = multi_mode;
@@ -1640,12 +1648,12 @@ static int tegra_i2c_probe(struct platform_device *pdev)
 		}
 	}
 
-	if (i2c_dev->bus_clk_rate > I2C_FAST_MODE &&
-	    i2c_dev->bus_clk_rate <= I2C_FAST_PLUS_MODE)
+	if (i2c_dev->bus_clk_rate > I2C_MAX_FAST_MODE_FREQ &&
+	    i2c_dev->bus_clk_rate <= I2C_MAX_FAST_MODE_PLUS_FREQ)
 		i2c_dev->clk_divisor_non_hs_mode =
 				i2c_dev->hw->clk_divisor_fast_plus_mode;
-	else if (i2c_dev->bus_clk_rate > I2C_STANDARD_MODE &&
-		 i2c_dev->bus_clk_rate <= I2C_FAST_MODE)
+	else if (i2c_dev->bus_clk_rate > I2C_MAX_STANDARD_MODE_FREQ &&
+		 i2c_dev->bus_clk_rate <= I2C_MAX_FAST_MODE_FREQ)
 		i2c_dev->clk_divisor_non_hs_mode =
 				i2c_dev->hw->clk_divisor_fast_mode;
 	else
diff --git a/drivers/i2c/busses/i2c-thunderx-pcidrv.c b/drivers/i2c/busses/i2c-thunderx-pcidrv.c
index 19f8eec..12c90aa 100644
--- a/drivers/i2c/busses/i2c-thunderx-pcidrv.c
+++ b/drivers/i2c/busses/i2c-thunderx-pcidrv.c
@@ -118,6 +118,8 @@ static void thunder_i2c_clock_disable(struct device *dev, struct clk *clk)
 static int thunder_i2c_smbus_setup_of(struct octeon_i2c *i2c,
 				      struct device_node *node)
 {
+	struct i2c_client *ara;
+
 	if (!node)
 		return -EINVAL;
 
@@ -125,9 +127,12 @@ static int thunder_i2c_smbus_setup_of(struct octeon_i2c *i2c,
 	if (!i2c->alert_data.irq)
 		return -EINVAL;
 
-	i2c->ara = i2c_setup_smbus_alert(&i2c->adap, &i2c->alert_data);
-	if (!i2c->ara)
-		return -ENODEV;
+	ara = i2c_new_smbus_alert_device(&i2c->adap, &i2c->alert_data);
+	if (IS_ERR(ara))
+		return PTR_ERR(ara);
+
+	i2c->ara = ara;
+
 	return 0;
 }
 
@@ -178,7 +183,7 @@ static int thunder_i2c_probe_pci(struct pci_dev *pdev,
 	thunder_i2c_clock_enable(dev, i2c);
 	ret = device_property_read_u32(dev, "clock-frequency", &i2c->twsi_freq);
 	if (ret)
-		i2c->twsi_freq = 100000;
+		i2c->twsi_freq = I2C_MAX_STANDARD_MODE_FREQ;
 
 	init_waitqueue_head(&i2c->queue);
 
diff --git a/drivers/i2c/busses/i2c-uniphier-f.c b/drivers/i2c/busses/i2c-uniphier-f.c
index 4241aac..2b258d5 100644
--- a/drivers/i2c/busses/i2c-uniphier-f.c
+++ b/drivers/i2c/busses/i2c-uniphier-f.c
@@ -73,8 +73,6 @@
 #define UNIPHIER_FI2C_BYTE_WISE		BIT(3)
 #define UNIPHIER_FI2C_DEFER_STOP_COMP	BIT(4)
 
-#define UNIPHIER_FI2C_DEFAULT_SPEED	100000
-#define UNIPHIER_FI2C_MAX_SPEED		400000
 #define UNIPHIER_FI2C_FIFO_SIZE		8
 
 struct uniphier_fi2c_priv {
@@ -537,9 +535,9 @@ static int uniphier_fi2c_probe(struct platform_device *pdev)
 	}
 
 	if (of_property_read_u32(dev->of_node, "clock-frequency", &bus_speed))
-		bus_speed = UNIPHIER_FI2C_DEFAULT_SPEED;
+		bus_speed = I2C_MAX_STANDARD_MODE_FREQ;
 
-	if (!bus_speed || bus_speed > UNIPHIER_FI2C_MAX_SPEED) {
+	if (!bus_speed || bus_speed > I2C_MAX_FAST_MODE_FREQ) {
 		dev_err(dev, "invalid clock-frequency %d\n", bus_speed);
 		return -EINVAL;
 	}
diff --git a/drivers/i2c/busses/i2c-uniphier.c b/drivers/i2c/busses/i2c-uniphier.c
index 0270090..668b1fa 100644
--- a/drivers/i2c/busses/i2c-uniphier.c
+++ b/drivers/i2c/busses/i2c-uniphier.c
@@ -35,9 +35,6 @@
 #define UNIPHIER_I2C_NOISE	0x1c	/* noise filter control */
 #define UNIPHIER_I2C_SETUP	0x20	/* setup time control */
 
-#define UNIPHIER_I2C_DEFAULT_SPEED	100000
-#define UNIPHIER_I2C_MAX_SPEED		400000
-
 struct uniphier_i2c_priv {
 	struct completion comp;
 	struct i2c_adapter adap;
@@ -333,9 +330,9 @@ static int uniphier_i2c_probe(struct platform_device *pdev)
 	}
 
 	if (of_property_read_u32(dev->of_node, "clock-frequency", &bus_speed))
-		bus_speed = UNIPHIER_I2C_DEFAULT_SPEED;
+		bus_speed = I2C_MAX_STANDARD_MODE_FREQ;
 
-	if (!bus_speed || bus_speed > UNIPHIER_I2C_MAX_SPEED) {
+	if (!bus_speed || bus_speed > I2C_MAX_FAST_MODE_FREQ) {
 		dev_err(dev, "invalid clock-frequency %d\n", bus_speed);
 		return -EINVAL;
 	}
diff --git a/drivers/i2c/busses/i2c-wmt.c b/drivers/i2c/busses/i2c-wmt.c
index 524017f..88f5aafd 100644
--- a/drivers/i2c/busses/i2c-wmt.c
+++ b/drivers/i2c/busses/i2c-wmt.c
@@ -399,7 +399,7 @@ static int wmt_i2c_probe(struct platform_device *pdev)
 
 	i2c_dev->mode = I2C_MODE_STANDARD;
 	err = of_property_read_u32(np, "clock-frequency", &clk_rate);
-	if ((!err) && (clk_rate == 400000))
+	if (!err && (clk_rate == I2C_MAX_FAST_MODE_FREQ))
 		i2c_dev->mode = I2C_MODE_FAST;
 
 	i2c_dev->dev = &pdev->dev;
diff --git a/drivers/i2c/busses/i2c-xlp9xx.c b/drivers/i2c/busses/i2c-xlp9xx.c
index 8a87397..391c878 100644
--- a/drivers/i2c/busses/i2c-xlp9xx.c
+++ b/drivers/i2c/busses/i2c-xlp9xx.c
@@ -71,8 +71,6 @@
 #define XLP9XX_I2C_SLAVEADDR_ADDR_SHIFT		1
 
 #define XLP9XX_I2C_IP_CLK_FREQ		133000000UL
-#define XLP9XX_I2C_DEFAULT_FREQ		100000
-#define XLP9XX_I2C_HIGH_FREQ		400000
 #define XLP9XX_I2C_FIFO_SIZE		0x80U
 #define XLP9XX_I2C_TIMEOUT_MS		1000
 #define XLP9XX_I2C_BUSY_TIMEOUT		50
@@ -476,12 +474,12 @@ static int xlp9xx_i2c_get_frequency(struct platform_device *pdev,
 
 	err = device_property_read_u32(&pdev->dev, "clock-frequency", &freq);
 	if (err) {
-		freq = XLP9XX_I2C_DEFAULT_FREQ;
+		freq = I2C_MAX_STANDARD_MODE_FREQ;
 		dev_dbg(&pdev->dev, "using default frequency %u\n", freq);
-	} else if (freq == 0 || freq > XLP9XX_I2C_HIGH_FREQ) {
+	} else if (freq == 0 || freq > I2C_MAX_FAST_MODE_FREQ) {
 		dev_warn(&pdev->dev, "invalid frequency %u, using default\n",
 			 freq);
-		freq = XLP9XX_I2C_DEFAULT_FREQ;
+		freq = I2C_MAX_STANDARD_MODE_FREQ;
 	}
 	priv->clk_hz = freq;
 
@@ -491,12 +489,16 @@ static int xlp9xx_i2c_get_frequency(struct platform_device *pdev,
 static int xlp9xx_i2c_smbus_setup(struct xlp9xx_i2c_dev *priv,
 				  struct platform_device *pdev)
 {
+	struct i2c_client *ara;
+
 	if (!priv->alert_data.irq)
 		return -EINVAL;
 
-	priv->ara = i2c_setup_smbus_alert(&priv->adapter, &priv->alert_data);
-	if (!priv->ara)
-		return -ENODEV;
+	ara = i2c_new_smbus_alert_device(&priv->adapter, &priv->alert_data);
+	if (IS_ERR(ara))
+		return PTR_ERR(ara);
+
+	priv->ara = ara;
 
 	return 0;
 }
diff --git a/drivers/i2c/busses/i2c-xlr.c b/drivers/i2c/busses/i2c-xlr.c
index 34cd4b3..282f161 100644
--- a/drivers/i2c/busses/i2c-xlr.c
+++ b/drivers/i2c/busses/i2c-xlr.c
@@ -404,7 +404,7 @@ static int xlr_i2c_probe(struct platform_device *pdev)
 
 	if (of_property_read_u32(pdev->dev.of_node, "clock-frequency",
 				 &busfreq))
-		busfreq = 100000;
+		busfreq = I2C_MAX_STANDARD_MODE_FREQ;
 
 	clk = devm_clk_get(&pdev->dev, NULL);
 	if (!IS_ERR(clk)) {
diff --git a/drivers/i2c/i2c-core-acpi.c b/drivers/i2c/i2c-core-acpi.c
index 8b0ff78..c8f42f2 100644
--- a/drivers/i2c/i2c-core-acpi.c
+++ b/drivers/i2c/i2c-core-acpi.c
@@ -318,7 +318,7 @@ static acpi_status i2c_acpi_lookup_speed(acpi_handle handle, u32 level,
 		lookup->min_speed = lookup->speed;
 
 	if (acpi_match_device_ids(adev, i2c_acpi_force_400khz_device_ids) == 0)
-		lookup->force_speed = 400000;
+		lookup->force_speed = I2C_MAX_FAST_MODE_FREQ;
 
 	return AE_OK;
 }
diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
index cefad08..a669127 100644
--- a/drivers/i2c/i2c-core-base.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -1593,32 +1593,30 @@ EXPORT_SYMBOL(i2c_del_adapter);
  * @dev: The device to scan for I2C timing properties
  * @t: the i2c_timings struct to be filled with values
  * @use_defaults: bool to use sane defaults derived from the I2C specification
- *		  when properties are not found, otherwise use 0
+ *		  when properties are not found, otherwise don't update
  *
  * Scan the device for the generic I2C properties describing timing parameters
  * for the signal and fill the given struct with the results. If a property was
  * not found and use_defaults was true, then maximum timings are assumed which
  * are derived from the I2C specification. If use_defaults is not used, the
- * results will be 0, so drivers can apply their own defaults later. The latter
- * is mainly intended for avoiding regressions of existing drivers which want
- * to switch to this function. New drivers almost always should use the defaults.
+ * results will be as before, so drivers can apply their own defaults before
+ * calling this helper. The latter is mainly intended for avoiding regressions
+ * of existing drivers which want to switch to this function. New drivers
+ * almost always should use the defaults.
  */
-
 void i2c_parse_fw_timings(struct device *dev, struct i2c_timings *t, bool use_defaults)
 {
 	int ret;
 
-	memset(t, 0, sizeof(*t));
-
 	ret = device_property_read_u32(dev, "clock-frequency", &t->bus_freq_hz);
 	if (ret && use_defaults)
-		t->bus_freq_hz = 100000;
+		t->bus_freq_hz = I2C_MAX_STANDARD_MODE_FREQ;
 
 	ret = device_property_read_u32(dev, "i2c-scl-rising-time-ns", &t->scl_rise_ns);
 	if (ret && use_defaults) {
-		if (t->bus_freq_hz <= 100000)
+		if (t->bus_freq_hz <= I2C_MAX_STANDARD_MODE_FREQ)
 			t->scl_rise_ns = 1000;
-		else if (t->bus_freq_hz <= 400000)
+		else if (t->bus_freq_hz <= I2C_MAX_FAST_MODE_FREQ)
 			t->scl_rise_ns = 300;
 		else
 			t->scl_rise_ns = 120;
@@ -1626,25 +1624,31 @@ void i2c_parse_fw_timings(struct device *dev, struct i2c_timings *t, bool use_de
 
 	ret = device_property_read_u32(dev, "i2c-scl-falling-time-ns", &t->scl_fall_ns);
 	if (ret && use_defaults) {
-		if (t->bus_freq_hz <= 400000)
+		if (t->bus_freq_hz <= I2C_MAX_FAST_MODE_FREQ)
 			t->scl_fall_ns = 300;
 		else
 			t->scl_fall_ns = 120;
 	}
 
-	device_property_read_u32(dev, "i2c-scl-internal-delay-ns", &t->scl_int_delay_ns);
+	ret = device_property_read_u32(dev, "i2c-scl-internal-delay-ns", &t->scl_int_delay_ns);
+	if (ret && use_defaults)
+		t->scl_int_delay_ns = 0;
 
 	ret = device_property_read_u32(dev, "i2c-sda-falling-time-ns", &t->sda_fall_ns);
 	if (ret && use_defaults)
 		t->sda_fall_ns = t->scl_fall_ns;
 
-	device_property_read_u32(dev, "i2c-sda-hold-time-ns", &t->sda_hold_ns);
+	ret = device_property_read_u32(dev, "i2c-sda-hold-time-ns", &t->sda_hold_ns);
+	if (ret && use_defaults)
+		t->sda_hold_ns = 0;
 
-	device_property_read_u32(dev, "i2c-digital-filter-width-ns",
-				 &t->digital_filter_width_ns);
+	ret = device_property_read_u32(dev, "i2c-digital-filter-width-ns", &t->digital_filter_width_ns);
+	if (ret && use_defaults)
+		t->digital_filter_width_ns = 0;
 
-	device_property_read_u32(dev, "i2c-analog-filter-cutoff-frequency",
-				 &t->analog_filter_cutoff_freq_hz);
+	ret = device_property_read_u32(dev, "i2c-analog-filter-cutoff-frequency", &t->analog_filter_cutoff_freq_hz);
+	if (ret && use_defaults)
+		t->analog_filter_cutoff_freq_hz = 0;
 }
 EXPORT_SYMBOL_GPL(i2c_parse_fw_timings);
 
@@ -2269,19 +2273,6 @@ i2c_new_scanned_device(struct i2c_adapter *adap,
 }
 EXPORT_SYMBOL_GPL(i2c_new_scanned_device);
 
-struct i2c_client *
-i2c_new_probed_device(struct i2c_adapter *adap,
-		      struct i2c_board_info *info,
-		      unsigned short const *addr_list,
-		      int (*probe)(struct i2c_adapter *adap, unsigned short addr))
-{
-	struct i2c_client *client;
-
-	client = i2c_new_scanned_device(adap, info, addr_list, probe);
-	return IS_ERR(client) ? NULL : client;
-}
-EXPORT_SYMBOL_GPL(i2c_new_probed_device);
-
 struct i2c_adapter *i2c_get_adapter(int nr)
 {
 	struct i2c_adapter *adapter;
diff --git a/drivers/i2c/i2c-core-smbus.c b/drivers/i2c/i2c-core-smbus.c
index 3ac426a..b34d2ff 100644
--- a/drivers/i2c/i2c-core-smbus.c
+++ b/drivers/i2c/i2c-core-smbus.c
@@ -666,7 +666,7 @@ s32 i2c_smbus_read_i2c_block_data_or_emulated(const struct i2c_client *client,
 EXPORT_SYMBOL(i2c_smbus_read_i2c_block_data_or_emulated);
 
 /**
- * i2c_setup_smbus_alert - Setup SMBus alert support
+ * i2c_new_smbus_alert_device - get ara client for SMBus alert support
  * @adapter: the target adapter
  * @setup: setup data for the SMBus alert handler
  * Context: can sleep
@@ -676,31 +676,25 @@ EXPORT_SYMBOL(i2c_smbus_read_i2c_block_data_or_emulated);
  * Handling can be done either through our IRQ handler, or by the
  * adapter (from its handler, periodic polling, or whatever).
  *
- * NOTE that if we manage the IRQ, we *MUST* know if it's level or
- * edge triggered in order to hand it to the workqueue correctly.
- * If triggering the alert seems to wedge the system, you probably
- * should have said it's level triggered.
- *
  * This returns the ara client, which should be saved for later use with
- * i2c_handle_smbus_alert() and ultimately i2c_unregister_device(); or NULL
- * to indicate an error.
+ * i2c_handle_smbus_alert() and ultimately i2c_unregister_device(); or an
+ * ERRPTR to indicate an error.
  */
-struct i2c_client *i2c_setup_smbus_alert(struct i2c_adapter *adapter,
-					 struct i2c_smbus_alert_setup *setup)
+struct i2c_client *i2c_new_smbus_alert_device(struct i2c_adapter *adapter,
+					      struct i2c_smbus_alert_setup *setup)
 {
 	struct i2c_board_info ara_board_info = {
 		I2C_BOARD_INFO("smbus_alert", 0x0c),
 		.platform_data = setup,
 	};
 
-	return i2c_new_device(adapter, &ara_board_info);
+	return i2c_new_client_device(adapter, &ara_board_info);
 }
-EXPORT_SYMBOL_GPL(i2c_setup_smbus_alert);
+EXPORT_SYMBOL_GPL(i2c_new_smbus_alert_device);
 
 #if IS_ENABLED(CONFIG_I2C_SMBUS) && IS_ENABLED(CONFIG_OF)
 int of_i2c_setup_smbus_alert(struct i2c_adapter *adapter)
 {
-	struct i2c_client *client;
 	int irq;
 
 	irq = of_property_match_string(adapter->dev.of_node, "interrupt-names",
@@ -710,11 +704,7 @@ int of_i2c_setup_smbus_alert(struct i2c_adapter *adapter)
 	else if (irq < 0)
 		return irq;
 
-	client = i2c_setup_smbus_alert(adapter, NULL);
-	if (!client)
-		return -ENODEV;
-
-	return 0;
+	return PTR_ERR_OR_ZERO(i2c_new_smbus_alert_device(adapter, NULL));
 }
 EXPORT_SYMBOL_GPL(of_i2c_setup_smbus_alert);
 #endif
diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index 2ea4585..da020ac 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -15,6 +15,7 @@
 /* The I2C_RDWR ioctl code is written by Kolja Waschk <waschk@telos.de> */
 
 #include <linux/cdev.h>
+#include <linux/compat.h>
 #include <linux/device.h>
 #include <linux/fs.h>
 #include <linux/i2c-dev.h>
@@ -27,7 +28,6 @@
 #include <linux/notifier.h>
 #include <linux/slab.h>
 #include <linux/uaccess.h>
-#include <linux/compat.h>
 
 /*
  * An i2c_dev represents an i2c_adapter ... an I2C or SMBus master, not a
@@ -40,7 +40,7 @@
 struct i2c_dev {
 	struct list_head list;
 	struct i2c_adapter *adap;
-	struct device *dev;
+	struct device dev;
 	struct cdev cdev;
 };
 
@@ -84,12 +84,14 @@ static struct i2c_dev *get_free_i2c_dev(struct i2c_adapter *adap)
 	return i2c_dev;
 }
 
-static void put_i2c_dev(struct i2c_dev *i2c_dev)
+static void put_i2c_dev(struct i2c_dev *i2c_dev, bool del_cdev)
 {
 	spin_lock(&i2c_dev_list_lock);
 	list_del(&i2c_dev->list);
 	spin_unlock(&i2c_dev_list_lock);
-	kfree(i2c_dev);
+	if (del_cdev)
+		cdev_device_del(&i2c_dev->cdev, &i2c_dev->dev);
+	put_device(&i2c_dev->dev);
 }
 
 static ssize_t name_show(struct device *dev,
@@ -628,6 +630,14 @@ static const struct file_operations i2cdev_fops = {
 
 static struct class *i2c_dev_class;
 
+static void i2cdev_dev_release(struct device *dev)
+{
+	struct i2c_dev *i2c_dev;
+
+	i2c_dev = container_of(dev, struct i2c_dev, dev);
+	kfree(i2c_dev);
+}
+
 static int i2cdev_attach_adapter(struct device *dev, void *dummy)
 {
 	struct i2c_adapter *adap;
@@ -644,27 +654,23 @@ static int i2cdev_attach_adapter(struct device *dev, void *dummy)
 
 	cdev_init(&i2c_dev->cdev, &i2cdev_fops);
 	i2c_dev->cdev.owner = THIS_MODULE;
-	res = cdev_add(&i2c_dev->cdev, MKDEV(I2C_MAJOR, adap->nr), 1);
-	if (res)
-		goto error_cdev;
 
-	/* register this i2c device with the driver core */
-	i2c_dev->dev = device_create(i2c_dev_class, &adap->dev,
-				     MKDEV(I2C_MAJOR, adap->nr), NULL,
-				     "i2c-%d", adap->nr);
-	if (IS_ERR(i2c_dev->dev)) {
-		res = PTR_ERR(i2c_dev->dev);
-		goto error;
+	device_initialize(&i2c_dev->dev);
+	i2c_dev->dev.devt = MKDEV(I2C_MAJOR, adap->nr);
+	i2c_dev->dev.class = i2c_dev_class;
+	i2c_dev->dev.parent = &adap->dev;
+	i2c_dev->dev.release = i2cdev_dev_release;
+	dev_set_name(&i2c_dev->dev, "i2c-%d", adap->nr);
+
+	res = cdev_device_add(&i2c_dev->cdev, &i2c_dev->dev);
+	if (res) {
+		put_i2c_dev(i2c_dev, false);
+		return res;
 	}
 
 	pr_debug("i2c-dev: adapter [%s] registered as minor %d\n",
 		 adap->name, adap->nr);
 	return 0;
-error:
-	cdev_del(&i2c_dev->cdev);
-error_cdev:
-	put_i2c_dev(i2c_dev);
-	return res;
 }
 
 static int i2cdev_detach_adapter(struct device *dev, void *dummy)
@@ -680,9 +686,7 @@ static int i2cdev_detach_adapter(struct device *dev, void *dummy)
 	if (!i2c_dev) /* attach_adapter must have failed */
 		return 0;
 
-	cdev_del(&i2c_dev->cdev);
-	put_i2c_dev(i2c_dev);
-	device_destroy(i2c_dev_class, MKDEV(I2C_MAJOR, adap->nr));
+	put_i2c_dev(i2c_dev, true);
 
 	pr_debug("i2c-dev: adapter [%s] unregistered\n", adap->name);
 	return 0;
diff --git a/drivers/i2c/i2c-slave-eeprom.c b/drivers/i2c/i2c-slave-eeprom.c
index db9763c..cb415b1 100644
--- a/drivers/i2c/i2c-slave-eeprom.c
+++ b/drivers/i2c/i2c-slave-eeprom.c
@@ -96,7 +96,7 @@ static ssize_t i2c_slave_eeprom_bin_read(struct file *filp, struct kobject *kobj
 	struct eeprom_data *eeprom;
 	unsigned long flags;
 
-	eeprom = dev_get_drvdata(container_of(kobj, struct device, kobj));
+	eeprom = dev_get_drvdata(kobj_to_dev(kobj));
 
 	spin_lock_irqsave(&eeprom->buffer_lock, flags);
 	memcpy(buf, &eeprom->buffer[off], count);
@@ -111,7 +111,7 @@ static ssize_t i2c_slave_eeprom_bin_write(struct file *filp, struct kobject *kob
 	struct eeprom_data *eeprom;
 	unsigned long flags;
 
-	eeprom = dev_get_drvdata(container_of(kobj, struct device, kobj));
+	eeprom = dev_get_drvdata(kobj_to_dev(kobj));
 
 	spin_lock_irqsave(&eeprom->buffer_lock, flags);
 	memcpy(&eeprom->buffer[off], buf, count);
diff --git a/drivers/i2c/i2c-smbus.c b/drivers/i2c/i2c-smbus.c
index 7e2f5d0..809bcf8 100644
--- a/drivers/i2c/i2c-smbus.c
+++ b/drivers/i2c/i2c-smbus.c
@@ -184,7 +184,7 @@ static struct i2c_driver smbalert_driver = {
  * corresponding I2C device driver's alert function.
  *
  * It is assumed that ara is a valid i2c client previously returned by
- * i2c_setup_smbus_alert().
+ * i2c_new_smbus_alert_device().
  */
 int i2c_handle_smbus_alert(struct i2c_client *ara)
 {
diff --git a/drivers/ide/ide-scan-pci.c b/drivers/ide/ide-scan-pci.c
index acf8748..b0411a1 100644
--- a/drivers/ide/ide-scan-pci.c
+++ b/drivers/ide/ide-scan-pci.c
@@ -89,8 +89,7 @@ static int __init ide_scan_pcidev(struct pci_dev *dev)
 static int __init ide_scan_pcibus(void)
 {
 	struct pci_dev *dev = NULL;
-	struct pci_driver *d;
-	struct list_head *l, *n;
+	struct pci_driver *d, *tmp;
 
 	pre_init = 0;
 	for_each_pci_dev(dev)
@@ -101,9 +100,8 @@ static int __init ide_scan_pcibus(void)
 	 *	are post init.
 	 */
 
-	list_for_each_safe(l, n, &ide_pci_drivers) {
-		list_del(l);
-		d = list_entry(l, struct pci_driver, node);
+	list_for_each_entry_safe(d, tmp, &ide_pci_drivers, node) {
+		list_del(&d->node);
 		if (__pci_register_driver(d, d->driver.owner,
 					  d->driver.mod_name))
 			printk(KERN_ERR "%s: failed to register %s driver\n",
diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig
index 5bd5185..d5c073a 100644
--- a/drivers/iio/Kconfig
+++ b/drivers/iio/Kconfig
@@ -88,6 +88,7 @@
 if IIO_TRIGGER
    source "drivers/iio/trigger/Kconfig"
 endif #IIO_TRIGGER
+source "drivers/iio/position/Kconfig"
 source "drivers/iio/potentiometer/Kconfig"
 source "drivers/iio/potentiostat/Kconfig"
 source "drivers/iio/pressure/Kconfig"
diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile
index bff682a..1712011 100644
--- a/drivers/iio/Makefile
+++ b/drivers/iio/Makefile
@@ -31,6 +31,7 @@
 obj-y += magnetometer/
 obj-y += multiplexer/
 obj-y += orientation/
+obj-y += position/
 obj-y += potentiometer/
 obj-y += potentiostat/
 obj-y += pressure/
diff --git a/drivers/iio/accel/cros_ec_accel_legacy.c b/drivers/iio/accel/cros_ec_accel_legacy.c
index 68e847c..2532b9a 100644
--- a/drivers/iio/accel/cros_ec_accel_legacy.c
+++ b/drivers/iio/accel/cros_ec_accel_legacy.c
@@ -170,7 +170,8 @@ static int cros_ec_accel_legacy_probe(struct platform_device *pdev)
 	if (!indio_dev)
 		return -ENOMEM;
 
-	ret = cros_ec_sensors_core_init(pdev, indio_dev, true);
+	ret = cros_ec_sensors_core_init(pdev, indio_dev, true,
+					cros_ec_sensors_capture, NULL);
 	if (ret)
 		return ret;
 
@@ -190,11 +191,6 @@ static int cros_ec_accel_legacy_probe(struct platform_device *pdev)
 		state->sign[CROS_EC_SENSOR_Z] = -1;
 	}
 
-	ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
-			cros_ec_sensors_capture, NULL);
-	if (ret)
-		return ret;
-
 	return devm_iio_device_register(dev, indio_dev);
 }
 
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index f4da821..12bb8b7 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -795,6 +795,16 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called rcar-gyroadc.
 
+config RN5T618_ADC
+	tristate "ADC for the RN5T618/RC5T619 family of chips"
+	depends on MFD_RN5T618
+	help
+	  Say yes here to build support for the integrated ADC inside the
+	  RN5T618/619 series PMICs:
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rn5t618-adc.
+
 config ROCKCHIP_SARADC
 	tristate "Rockchip SARADC driver"
 	depends on ARCH_ROCKCHIP || (ARM && COMPILE_TEST)
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 8462455..6378078 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -75,6 +75,7 @@
 obj-$(CONFIG_QCOM_SPMI_VADC) += qcom-spmi-vadc.o
 obj-$(CONFIG_QCOM_PM8XXX_XOADC) += qcom-pm8xxx-xoadc.o
 obj-$(CONFIG_RCAR_GYRO_ADC) += rcar-gyroadc.o
+obj-$(CONFIG_RN5T618_ADC) += rn5t618-adc.o
 obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o
 obj-$(CONFIG_SC27XX_ADC) += sc27xx_adc.o
 obj-$(CONFIG_SPEAR_ADC) += spear_adc.o
diff --git a/drivers/iio/adc/rn5t618-adc.c b/drivers/iio/adc/rn5t618-adc.c
new file mode 100644
index 0000000..f21027e
--- /dev/null
+++ b/drivers/iio/adc/rn5t618-adc.c
@@ -0,0 +1,256 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * ADC driver for the RICOH RN5T618 power management chip family
+ *
+ * Copyright (C) 2019 Andreas Kemnade
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mfd/rn5t618.h>
+#include <linux/platform_device.h>
+#include <linux/completion.h>
+#include <linux/regmap.h>
+#include <linux/iio/iio.h>
+#include <linux/slab.h>
+
+#define RN5T618_ADC_CONVERSION_TIMEOUT   (msecs_to_jiffies(500))
+#define RN5T618_REFERENCE_VOLT 2500
+
+/* mask for selecting channels for single conversion */
+#define RN5T618_ADCCNT3_CHANNEL_MASK 0x7
+/* average 4-time conversion mode */
+#define RN5T618_ADCCNT3_AVG BIT(3)
+/* set for starting a single conversion, gets cleared by hw when done */
+#define RN5T618_ADCCNT3_GODONE BIT(4)
+/* automatic conversion, period is in ADCCNT2, selected channels are
+ * in ADCCNT1
+ */
+#define RN5T618_ADCCNT3_AUTO BIT(5)
+#define RN5T618_ADCEND_IRQ BIT(0)
+
+struct rn5t618_adc_data {
+	struct device *dev;
+	struct rn5t618 *rn5t618;
+	struct completion conv_completion;
+	int irq;
+};
+
+struct rn5t618_channel_ratios {
+	u16 numerator;
+	u16 denominator;
+};
+
+enum rn5t618_channels {
+	LIMMON = 0,
+	VBAT,
+	VADP,
+	VUSB,
+	VSYS,
+	VTHM,
+	AIN1,
+	AIN0
+};
+
+static const struct rn5t618_channel_ratios rn5t618_ratios[8] = {
+	[LIMMON] = {50, 32}, /* measured across 20mOhm, amplified by 32 */
+	[VBAT] = {2, 1},
+	[VADP] = {3, 1},
+	[VUSB] = {3, 1},
+	[VSYS] = {3, 1},
+	[VTHM] = {1, 1},
+	[AIN1] = {1, 1},
+	[AIN0] = {1, 1},
+};
+
+static int rn5t618_read_adc_reg(struct rn5t618 *rn5t618, int reg, u16 *val)
+{
+	u8 data[2];
+	int ret;
+
+	ret = regmap_bulk_read(rn5t618->regmap, reg, data, sizeof(data));
+	if (ret < 0)
+		return ret;
+
+	*val = (data[0] << 4) | (data[1] & 0xF);
+
+	return 0;
+}
+
+static irqreturn_t rn5t618_adc_irq(int irq, void *data)
+{
+	struct rn5t618_adc_data *adc = data;
+	unsigned int r = 0;
+	int ret;
+
+	/* clear low & high threshold irqs */
+	regmap_write(adc->rn5t618->regmap, RN5T618_IR_ADC1, 0);
+	regmap_write(adc->rn5t618->regmap, RN5T618_IR_ADC2, 0);
+
+	ret = regmap_read(adc->rn5t618->regmap, RN5T618_IR_ADC3, &r);
+	if (ret < 0)
+		dev_err(adc->dev, "failed to read IRQ status: %d\n", ret);
+
+	regmap_write(adc->rn5t618->regmap, RN5T618_IR_ADC3, 0);
+
+	if (r & RN5T618_ADCEND_IRQ)
+		complete(&adc->conv_completion);
+
+	return IRQ_HANDLED;
+}
+
+static int rn5t618_adc_read(struct iio_dev *iio_dev,
+			    const struct iio_chan_spec *chan,
+			    int *val, int *val2, long mask)
+{
+	struct rn5t618_adc_data *adc = iio_priv(iio_dev);
+	u16 raw;
+	int ret;
+
+	if (mask == IIO_CHAN_INFO_SCALE) {
+		*val = RN5T618_REFERENCE_VOLT *
+		       rn5t618_ratios[chan->channel].numerator;
+		*val2 = rn5t618_ratios[chan->channel].denominator * 4095;
+
+		return IIO_VAL_FRACTIONAL;
+	}
+
+	/* select channel */
+	ret = regmap_update_bits(adc->rn5t618->regmap, RN5T618_ADCCNT3,
+				 RN5T618_ADCCNT3_CHANNEL_MASK,
+				 chan->channel);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_write(adc->rn5t618->regmap, RN5T618_EN_ADCIR3,
+			   RN5T618_ADCEND_IRQ);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_update_bits(adc->rn5t618->regmap, RN5T618_ADCCNT3,
+				 RN5T618_ADCCNT3_AVG,
+				 mask == IIO_CHAN_INFO_AVERAGE_RAW ?
+				 RN5T618_ADCCNT3_AVG : 0);
+	if (ret < 0)
+		return ret;
+
+	init_completion(&adc->conv_completion);
+	/* single conversion */
+	ret = regmap_update_bits(adc->rn5t618->regmap, RN5T618_ADCCNT3,
+				 RN5T618_ADCCNT3_GODONE,
+				 RN5T618_ADCCNT3_GODONE);
+	if (ret < 0)
+		return ret;
+
+	ret = wait_for_completion_timeout(&adc->conv_completion,
+					  RN5T618_ADC_CONVERSION_TIMEOUT);
+	if (ret == 0) {
+		dev_warn(adc->dev, "timeout waiting for adc result\n");
+		return -ETIMEDOUT;
+	}
+
+	ret = rn5t618_read_adc_reg(adc->rn5t618,
+				   RN5T618_ILIMDATAH + 2 * chan->channel,
+				   &raw);
+	if (ret < 0)
+		return ret;
+
+	*val = raw;
+
+	return IIO_VAL_INT;
+}
+
+static const struct iio_info rn5t618_adc_iio_info = {
+	.read_raw = &rn5t618_adc_read,
+};
+
+#define RN5T618_ADC_CHANNEL(_channel, _type, _name) { \
+	.type = _type, \
+	.channel = _channel, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+			      BIT(IIO_CHAN_INFO_AVERAGE_RAW) | \
+			      BIT(IIO_CHAN_INFO_SCALE), \
+	.datasheet_name = _name, \
+	.indexed = 1. \
+}
+
+static const struct iio_chan_spec rn5t618_adc_iio_channels[] = {
+	RN5T618_ADC_CHANNEL(LIMMON, IIO_CURRENT, "LIMMON"),
+	RN5T618_ADC_CHANNEL(VBAT, IIO_VOLTAGE, "VBAT"),
+	RN5T618_ADC_CHANNEL(VADP, IIO_VOLTAGE, "VADP"),
+	RN5T618_ADC_CHANNEL(VUSB, IIO_VOLTAGE, "VUSB"),
+	RN5T618_ADC_CHANNEL(VSYS, IIO_VOLTAGE, "VSYS"),
+	RN5T618_ADC_CHANNEL(VTHM, IIO_VOLTAGE, "VTHM"),
+	RN5T618_ADC_CHANNEL(AIN1, IIO_VOLTAGE, "AIN1"),
+	RN5T618_ADC_CHANNEL(AIN0, IIO_VOLTAGE, "AIN0")
+};
+
+static int rn5t618_adc_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct iio_dev *iio_dev;
+	struct rn5t618_adc_data *adc;
+	struct rn5t618 *rn5t618 = dev_get_drvdata(pdev->dev.parent);
+
+	iio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc));
+	if (!iio_dev) {
+		dev_err(&pdev->dev, "failed allocating iio device\n");
+		return -ENOMEM;
+	}
+
+	adc = iio_priv(iio_dev);
+	adc->dev = &pdev->dev;
+	adc->rn5t618 = rn5t618;
+
+	if (rn5t618->irq_data)
+		adc->irq = regmap_irq_get_virq(rn5t618->irq_data,
+					       RN5T618_IRQ_ADC);
+
+	if (adc->irq <= 0) {
+		dev_err(&pdev->dev, "get virq failed\n");
+		return -EINVAL;
+	}
+
+	init_completion(&adc->conv_completion);
+
+	iio_dev->name = dev_name(&pdev->dev);
+	iio_dev->dev.parent = &pdev->dev;
+	iio_dev->info = &rn5t618_adc_iio_info;
+	iio_dev->modes = INDIO_DIRECT_MODE;
+	iio_dev->channels = rn5t618_adc_iio_channels;
+	iio_dev->num_channels = ARRAY_SIZE(rn5t618_adc_iio_channels);
+
+	/* stop any auto-conversion */
+	ret = regmap_write(rn5t618->regmap, RN5T618_ADCCNT3, 0);
+	if (ret < 0)
+		return ret;
+
+	platform_set_drvdata(pdev, iio_dev);
+
+	ret = devm_request_threaded_irq(adc->dev, adc->irq, NULL,
+					rn5t618_adc_irq,
+					IRQF_ONESHOT, dev_name(adc->dev),
+					adc);
+	if (ret < 0) {
+		dev_err(adc->dev, "request irq %d failed: %d\n", adc->irq, ret);
+		return ret;
+	}
+
+	return devm_iio_device_register(adc->dev, iio_dev);
+}
+
+static struct platform_driver rn5t618_adc_driver = {
+	.driver = {
+		.name   = "rn5t618-adc",
+	},
+	.probe = rn5t618_adc_probe,
+};
+
+module_platform_driver(rn5t618_adc_driver);
+MODULE_ALIAS("platform:rn5t618-adc");
+MODULE_DESCRIPTION("RICOH RN5T618 ADC driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c b/drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c
index 1dcc2a1..af801e2 100644
--- a/drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c
@@ -97,7 +97,7 @@ static int cros_ec_lid_angle_probe(struct platform_device *pdev)
 	if (!indio_dev)
 		return -ENOMEM;
 
-	ret = cros_ec_sensors_core_init(pdev, indio_dev, false);
+	ret = cros_ec_sensors_core_init(pdev, indio_dev, false, NULL, NULL);
 	if (ret)
 		return ret;
 
@@ -127,7 +127,6 @@ MODULE_DEVICE_TABLE(platform, cros_ec_lid_angle_ids);
 static struct platform_driver cros_ec_lid_angle_platform_driver = {
 	.driver = {
 		.name	= DRV_NAME,
-		.pm	= &cros_ec_sensors_pm_ops,
 	},
 	.probe		= cros_ec_lid_angle_probe,
 	.id_table	= cros_ec_lid_angle_ids,
diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
index 576e45f..a66941fd 100644
--- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
@@ -230,10 +230,14 @@ static int cros_ec_sensors_probe(struct platform_device *pdev)
 	if (!indio_dev)
 		return -ENOMEM;
 
-	ret = cros_ec_sensors_core_init(pdev, indio_dev, true);
+	ret = cros_ec_sensors_core_init(pdev, indio_dev, true,
+					cros_ec_sensors_capture,
+					cros_ec_sensors_push_data);
 	if (ret)
 		return ret;
 
+	iio_buffer_set_attrs(indio_dev->buffer, cros_ec_sensor_fifo_attributes);
+
 	indio_dev->info = &ec_sensors_info;
 	state = iio_priv(indio_dev);
 	for (channel = state->channels, i = CROS_EC_SENSOR_X;
@@ -245,7 +249,6 @@ static int cros_ec_sensors_probe(struct platform_device *pdev)
 			BIT(IIO_CHAN_INFO_CALIBSCALE);
 		channel->info_mask_shared_by_all =
 			BIT(IIO_CHAN_INFO_SCALE) |
-			BIT(IIO_CHAN_INFO_FREQUENCY) |
 			BIT(IIO_CHAN_INFO_SAMP_FREQ);
 		channel->info_mask_shared_by_all_available =
 			BIT(IIO_CHAN_INFO_SAMP_FREQ);
@@ -292,11 +295,6 @@ static int cros_ec_sensors_probe(struct platform_device *pdev)
 	else
 		state->core.read_ec_sensors_data = cros_ec_sensors_read_cmd;
 
-	ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
-			cros_ec_sensors_capture, NULL);
-	if (ret)
-		return ret;
-
 	return devm_iio_device_register(dev, indio_dev);
 }
 
@@ -317,7 +315,6 @@ MODULE_DEVICE_TABLE(platform, cros_ec_sensors_ids);
 static struct platform_driver cros_ec_sensors_platform_driver = {
 	.driver = {
 		.name	= "cros-ec-sensors",
-		.pm	= &cros_ec_sensors_pm_ops,
 	},
 	.probe		= cros_ec_sensors_probe,
 	.id_table	= cros_ec_sensors_ids,
diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
index d3a3626..c831915 100644
--- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
@@ -11,7 +11,9 @@
 #include <linux/iio/common/cros_ec_sensors_core.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/kfifo_buf.h>
+#include <linux/iio/sysfs.h>
 #include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/slab.h>
@@ -20,6 +22,12 @@
 #include <linux/platform_data/cros_ec_sensorhub.h>
 #include <linux/platform_device.h>
 
+/*
+ * Hard coded to the first device to support sensor fifo.  The EC has a 2048
+ * byte fifo and will trigger an interrupt when fifo is 2/3 full.
+ */
+#define CROS_EC_FIFO_SIZE (2048 * 2 / 3)
+
 static char *cros_ec_loc[] = {
 	[MOTIONSENSE_LOC_BASE] = "base",
 	[MOTIONSENSE_LOC_LID] = "lid",
@@ -53,8 +61,15 @@ static int cros_ec_get_host_cmd_version_mask(struct cros_ec_device *ec_dev,
 
 static void get_default_min_max_freq(enum motionsensor_type type,
 				     u32 *min_freq,
-				     u32 *max_freq)
+				     u32 *max_freq,
+				     u32 *max_fifo_events)
 {
+	/*
+	 * We don't know fifo size, set to size previously used by older
+	 * hardware.
+	 */
+	*max_fifo_events = CROS_EC_FIFO_SIZE;
+
 	switch (type) {
 	case MOTIONSENSE_TYPE_ACCEL:
 	case MOTIONSENSE_TYPE_GYRO:
@@ -82,9 +97,155 @@ static void get_default_min_max_freq(enum motionsensor_type type,
 	}
 }
 
+static int cros_ec_sensor_set_ec_rate(struct cros_ec_sensors_core_state *st,
+				      int rate)
+{
+	int ret;
+
+	if (rate > U16_MAX)
+		rate = U16_MAX;
+
+	mutex_lock(&st->cmd_lock);
+	st->param.cmd = MOTIONSENSE_CMD_EC_RATE;
+	st->param.ec_rate.data = rate;
+	ret = cros_ec_motion_send_host_cmd(st, 0);
+	mutex_unlock(&st->cmd_lock);
+	return ret;
+}
+
+static ssize_t cros_ec_sensor_set_report_latency(struct device *dev,
+						 struct device_attribute *attr,
+						 const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+	int integer, fract, ret;
+	int latency;
+
+	ret = iio_str_to_fixpoint(buf, 100000, &integer, &fract);
+	if (ret)
+		return ret;
+
+	/* EC rate is in ms. */
+	latency = integer * 1000 + fract / 1000;
+	ret = cros_ec_sensor_set_ec_rate(st, latency);
+	if (ret < 0)
+		return ret;
+
+	return len;
+}
+
+static ssize_t cros_ec_sensor_get_report_latency(struct device *dev,
+						 struct device_attribute *attr,
+						 char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+	int latency, ret;
+
+	mutex_lock(&st->cmd_lock);
+	st->param.cmd = MOTIONSENSE_CMD_EC_RATE;
+	st->param.ec_rate.data = EC_MOTION_SENSE_NO_VALUE;
+
+	ret = cros_ec_motion_send_host_cmd(st, 0);
+	latency = st->resp->ec_rate.ret;
+	mutex_unlock(&st->cmd_lock);
+	if (ret < 0)
+		return ret;
+
+	return sprintf(buf, "%d.%06u\n",
+		       latency / 1000,
+		       (latency % 1000) * 1000);
+}
+
+static IIO_DEVICE_ATTR(hwfifo_timeout, 0644,
+		       cros_ec_sensor_get_report_latency,
+		       cros_ec_sensor_set_report_latency, 0);
+
+static ssize_t hwfifo_watermark_max_show(struct device *dev,
+					 struct device_attribute *attr,
+					 char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+
+	return sprintf(buf, "%d\n", st->fifo_max_event_count);
+}
+
+static IIO_DEVICE_ATTR_RO(hwfifo_watermark_max, 0);
+
+const struct attribute *cros_ec_sensor_fifo_attributes[] = {
+	&iio_dev_attr_hwfifo_timeout.dev_attr.attr,
+	&iio_dev_attr_hwfifo_watermark_max.dev_attr.attr,
+	NULL,
+};
+EXPORT_SYMBOL_GPL(cros_ec_sensor_fifo_attributes);
+
+int cros_ec_sensors_push_data(struct iio_dev *indio_dev,
+			      s16 *data,
+			      s64 timestamp)
+{
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+	s16 *out;
+	s64 delta;
+	unsigned int i;
+
+	/*
+	 * Ignore samples if the buffer is not set: it is needed if the ODR is
+	 * set but the buffer is not enabled yet.
+	 */
+	if (!iio_buffer_enabled(indio_dev))
+		return 0;
+
+	out = (s16 *)st->samples;
+	for_each_set_bit(i,
+			 indio_dev->active_scan_mask,
+			 indio_dev->masklength) {
+		*out = data[i];
+		out++;
+	}
+
+	if (iio_device_get_clock(indio_dev) != CLOCK_BOOTTIME)
+		delta = iio_get_time_ns(indio_dev) - cros_ec_get_time_ns();
+	else
+		delta = 0;
+
+	iio_push_to_buffers_with_timestamp(indio_dev, st->samples,
+					   timestamp + delta);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cros_ec_sensors_push_data);
+
+static void cros_ec_sensors_core_clean(void *arg)
+{
+	struct platform_device *pdev = (struct platform_device *)arg;
+	struct cros_ec_sensorhub *sensor_hub =
+		dev_get_drvdata(pdev->dev.parent);
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+	u8 sensor_num = st->param.info.sensor_num;
+
+	cros_ec_sensorhub_unregister_push_data(sensor_hub, sensor_num);
+}
+
+/**
+ * cros_ec_sensors_core_init() - basic initialization of the core structure
+ * @pdev:		platform device created for the sensors
+ * @indio_dev:		iio device structure of the device
+ * @physical_device:	true if the device refers to a physical device
+ * @trigger_capture:    function pointer to call buffer is triggered,
+ *    for backward compatibility.
+ * @push_data:          function to call when cros_ec_sensorhub receives
+ *    a sample for that sensor.
+ *
+ * Return: 0 on success, -errno on failure.
+ */
 int cros_ec_sensors_core_init(struct platform_device *pdev,
 			      struct iio_dev *indio_dev,
-			      bool physical_device)
+			      bool physical_device,
+			      cros_ec_sensors_capture_t trigger_capture,
+			      cros_ec_sensorhub_push_data_cb_t push_data)
 {
 	struct device *dev = &pdev->dev;
 	struct cros_ec_sensors_core_state *state = iio_priv(indio_dev);
@@ -92,6 +253,7 @@ int cros_ec_sensors_core_init(struct platform_device *pdev,
 	struct cros_ec_dev *ec = sensor_hub->ec;
 	struct cros_ec_sensor_platform *sensor_platform = dev_get_platdata(dev);
 	u32 ver_mask;
+	int frequencies[ARRAY_SIZE(state->frequencies) / 2] = { 0 };
 	int ret, i;
 
 	platform_set_drvdata(pdev, indio_dev);
@@ -123,8 +285,6 @@ int cros_ec_sensors_core_init(struct platform_device *pdev,
 	indio_dev->name = pdev->name;
 
 	if (physical_device) {
-		indio_dev->modes = INDIO_DIRECT_MODE;
-
 		state->param.cmd = MOTIONSENSE_CMD_INFO;
 		state->param.info.sensor_num = sensor_platform->sensor_num;
 		ret = cros_ec_motion_send_host_cmd(state, 0);
@@ -142,16 +302,63 @@ int cros_ec_sensors_core_init(struct platform_device *pdev,
 			state->calib[i].scale = MOTION_SENSE_DEFAULT_SCALE;
 
 		/* 0 is a correct value used to stop the device */
-		state->frequencies[0] = 0;
 		if (state->msg->version < 3) {
 			get_default_min_max_freq(state->resp->info.type,
-						 &state->frequencies[1],
-						 &state->frequencies[2]);
+						 &frequencies[1],
+						 &frequencies[2],
+						 &state->fifo_max_event_count);
 		} else {
-			state->frequencies[1] =
-			    state->resp->info_3.min_frequency;
-			state->frequencies[2] =
-			    state->resp->info_3.max_frequency;
+			frequencies[1] = state->resp->info_3.min_frequency;
+			frequencies[2] = state->resp->info_3.max_frequency;
+			state->fifo_max_event_count =
+			    state->resp->info_3.fifo_max_event_count;
+		}
+		for (i = 0; i < ARRAY_SIZE(frequencies); i++) {
+			state->frequencies[2 * i] = frequencies[i] / 1000;
+			state->frequencies[2 * i + 1] =
+				(frequencies[i] % 1000) * 1000;
+		}
+
+		if (cros_ec_check_features(ec, EC_FEATURE_MOTION_SENSE_FIFO)) {
+			/*
+			 * Create a software buffer, feed by the EC FIFO.
+			 * We can not use trigger here, as events are generated
+			 * as soon as sample_frequency is set.
+			 */
+			struct iio_buffer *buffer;
+
+			buffer = devm_iio_kfifo_allocate(dev);
+			if (!buffer)
+				return -ENOMEM;
+
+			iio_device_attach_buffer(indio_dev, buffer);
+			indio_dev->modes = INDIO_BUFFER_SOFTWARE;
+
+			ret = cros_ec_sensorhub_register_push_data(
+					sensor_hub, sensor_platform->sensor_num,
+					indio_dev, push_data);
+			if (ret)
+				return ret;
+
+			ret = devm_add_action_or_reset(
+					dev, cros_ec_sensors_core_clean, pdev);
+			if (ret)
+				return ret;
+
+			/* Timestamp coming from FIFO are in ns since boot. */
+			ret = iio_device_set_clock(indio_dev, CLOCK_BOOTTIME);
+			if (ret)
+				return ret;
+		} else {
+			/*
+			 * The only way to get samples in buffer is to set a
+			 * software tigger (systrig, hrtimer).
+			 */
+			ret = devm_iio_triggered_buffer_setup(
+					dev, indio_dev, NULL, trigger_capture,
+					NULL);
+			if (ret)
+				return ret;
 		}
 	}
 
@@ -159,6 +366,16 @@ int cros_ec_sensors_core_init(struct platform_device *pdev,
 }
 EXPORT_SYMBOL_GPL(cros_ec_sensors_core_init);
 
+/**
+ * cros_ec_motion_send_host_cmd() - send motion sense host command
+ * @state:		pointer to state information for device
+ * @opt_length:	optional length to reduce the response size, useful on the data
+ *		path. Otherwise, the maximal allowed response size is used
+ *
+ * When called, the sub-command is assumed to be set in param->cmd.
+ *
+ * Return: 0 on success, -errno on failure.
+ */
 int cros_ec_motion_send_host_cmd(struct cros_ec_sensors_core_state *state,
 				 u16 opt_length)
 {
@@ -421,6 +638,14 @@ int cros_ec_sensors_read_lpc(struct iio_dev *indio_dev,
 }
 EXPORT_SYMBOL_GPL(cros_ec_sensors_read_lpc);
 
+/**
+ * cros_ec_sensors_read_cmd() - retrieve data using the EC command protocol
+ * @indio_dev:	pointer to IIO device
+ * @scan_mask:	bitmap of the sensor indices to scan
+ * @data:	location to store data
+ *
+ * Return: 0 on success, -errno on failure.
+ */
 int cros_ec_sensors_read_cmd(struct iio_dev *indio_dev,
 			     unsigned long scan_mask, s16 *data)
 {
@@ -445,6 +670,18 @@ int cros_ec_sensors_read_cmd(struct iio_dev *indio_dev,
 }
 EXPORT_SYMBOL_GPL(cros_ec_sensors_read_cmd);
 
+/**
+ * cros_ec_sensors_capture() - the trigger handler function
+ * @irq:	the interrupt number.
+ * @p:		a pointer to the poll function.
+ *
+ * On a trigger event occurring, if the pollfunc is attached then this
+ * handler is called as a threaded interrupt (and hence may sleep). It
+ * is responsible for grabbing data from the device and pushing it into
+ * the associated buffer.
+ *
+ * Return: IRQ_HANDLED
+ */
 irqreturn_t cros_ec_sensors_capture(int irq, void *p)
 {
 	struct iio_poll_func *pf = p;
@@ -480,26 +717,24 @@ irqreturn_t cros_ec_sensors_capture(int irq, void *p)
 }
 EXPORT_SYMBOL_GPL(cros_ec_sensors_capture);
 
+/**
+ * cros_ec_sensors_core_read() - function to request a value from the sensor
+ * @st:		pointer to state information for device
+ * @chan:	channel specification structure table
+ * @val:	will contain one element making up the returned value
+ * @val2:	will contain another element making up the returned value
+ * @mask:	specifies which values to be requested
+ *
+ * Return:	the type of value returned by the device
+ */
 int cros_ec_sensors_core_read(struct cros_ec_sensors_core_state *st,
 			  struct iio_chan_spec const *chan,
 			  int *val, int *val2, long mask)
 {
-	int ret;
+	int ret, frequency;
 
 	switch (mask) {
 	case IIO_CHAN_INFO_SAMP_FREQ:
-		st->param.cmd = MOTIONSENSE_CMD_EC_RATE;
-		st->param.ec_rate.data =
-			EC_MOTION_SENSE_NO_VALUE;
-
-		ret = cros_ec_motion_send_host_cmd(st, 0);
-		if (ret)
-			break;
-
-		*val = st->resp->ec_rate.ret;
-		ret = IIO_VAL_INT;
-		break;
-	case IIO_CHAN_INFO_FREQUENCY:
 		st->param.cmd = MOTIONSENSE_CMD_SENSOR_ODR;
 		st->param.sensor_odr.data =
 			EC_MOTION_SENSE_NO_VALUE;
@@ -508,8 +743,10 @@ int cros_ec_sensors_core_read(struct cros_ec_sensors_core_state *st,
 		if (ret)
 			break;
 
-		*val = st->resp->sensor_odr.ret;
-		ret = IIO_VAL_INT;
+		frequency = st->resp->sensor_odr.ret;
+		*val = frequency / 1000;
+		*val2 = (frequency % 1000) * 1000;
+		ret = IIO_VAL_INT_PLUS_MICRO;
 		break;
 	default:
 		ret = -EINVAL;
@@ -520,6 +757,17 @@ int cros_ec_sensors_core_read(struct cros_ec_sensors_core_state *st,
 }
 EXPORT_SYMBOL_GPL(cros_ec_sensors_core_read);
 
+/**
+ * cros_ec_sensors_core_read_avail() - get available values
+ * @indio_dev:		pointer to state information for device
+ * @chan:	channel specification structure table
+ * @vals:	list of available values
+ * @type:	type of data returned
+ * @length:	number of data returned in the array
+ * @mask:	specifies which values to be requested
+ *
+ * Return:	an error code, IIO_AVAIL_RANGE or IIO_AVAIL_LIST
+ */
 int cros_ec_sensors_core_read_avail(struct iio_dev *indio_dev,
 				    struct iio_chan_spec const *chan,
 				    const int **vals,
@@ -533,7 +781,7 @@ int cros_ec_sensors_core_read_avail(struct iio_dev *indio_dev,
 	case IIO_CHAN_INFO_SAMP_FREQ:
 		*length = ARRAY_SIZE(state->frequencies);
 		*vals = (const int *)&state->frequencies;
-		*type = IIO_VAL_INT;
+		*type = IIO_VAL_INT_PLUS_MICRO;
 		return IIO_AVAIL_LIST;
 	}
 
@@ -541,31 +789,33 @@ int cros_ec_sensors_core_read_avail(struct iio_dev *indio_dev,
 }
 EXPORT_SYMBOL_GPL(cros_ec_sensors_core_read_avail);
 
+/**
+ * cros_ec_sensors_core_write() - function to write a value to the sensor
+ * @st:		pointer to state information for device
+ * @chan:	channel specification structure table
+ * @val:	first part of value to write
+ * @val2:	second part of value to write
+ * @mask:	specifies which values to write
+ *
+ * Return:	the type of value returned by the device
+ */
 int cros_ec_sensors_core_write(struct cros_ec_sensors_core_state *st,
 			       struct iio_chan_spec const *chan,
 			       int val, int val2, long mask)
 {
-	int ret;
+	int ret, frequency;
 
 	switch (mask) {
-	case IIO_CHAN_INFO_FREQUENCY:
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		frequency = val * 1000 + val2 / 1000;
 		st->param.cmd = MOTIONSENSE_CMD_SENSOR_ODR;
-		st->param.sensor_odr.data = val;
+		st->param.sensor_odr.data = frequency;
 
 		/* Always roundup, so caller gets at least what it asks for. */
 		st->param.sensor_odr.roundup = 1;
 
 		ret = cros_ec_motion_send_host_cmd(st, 0);
 		break;
-	case IIO_CHAN_INFO_SAMP_FREQ:
-		st->param.cmd = MOTIONSENSE_CMD_EC_RATE;
-		st->param.ec_rate.data = val;
-
-		ret = cros_ec_motion_send_host_cmd(st, 0);
-		if (ret)
-			break;
-		st->curr_sampl_freq = val;
-		break;
 	default:
 		ret = -EINVAL;
 		break;
@@ -574,52 +824,5 @@ int cros_ec_sensors_core_write(struct cros_ec_sensors_core_state *st,
 }
 EXPORT_SYMBOL_GPL(cros_ec_sensors_core_write);
 
-static int __maybe_unused cros_ec_sensors_prepare(struct device *dev)
-{
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
-	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
-
-	if (st->curr_sampl_freq == 0)
-		return 0;
-
-	/*
-	 * If the sensors are sampled at high frequency, we will not be able to
-	 * sleep. Set sampling to a long period if necessary.
-	 */
-	if (st->curr_sampl_freq < CROS_EC_MIN_SUSPEND_SAMPLING_FREQUENCY) {
-		mutex_lock(&st->cmd_lock);
-		st->param.cmd = MOTIONSENSE_CMD_EC_RATE;
-		st->param.ec_rate.data = CROS_EC_MIN_SUSPEND_SAMPLING_FREQUENCY;
-		cros_ec_motion_send_host_cmd(st, 0);
-		mutex_unlock(&st->cmd_lock);
-	}
-	return 0;
-}
-
-static void __maybe_unused cros_ec_sensors_complete(struct device *dev)
-{
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
-	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
-
-	if (st->curr_sampl_freq == 0)
-		return;
-
-	if (st->curr_sampl_freq < CROS_EC_MIN_SUSPEND_SAMPLING_FREQUENCY) {
-		mutex_lock(&st->cmd_lock);
-		st->param.cmd = MOTIONSENSE_CMD_EC_RATE;
-		st->param.ec_rate.data = st->curr_sampl_freq;
-		cros_ec_motion_send_host_cmd(st, 0);
-		mutex_unlock(&st->cmd_lock);
-	}
-}
-
-const struct dev_pm_ops cros_ec_sensors_pm_ops = {
-#ifdef CONFIG_PM_SLEEP
-	.prepare = cros_ec_sensors_prepare,
-	.complete = cros_ec_sensors_complete
-#endif
-};
-EXPORT_SYMBOL_GPL(cros_ec_sensors_pm_ops);
-
 MODULE_DESCRIPTION("ChromeOS EC sensor hub core functions");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
index eac63c1..2352c42 100644
--- a/drivers/iio/industrialio-core.c
+++ b/drivers/iio/industrialio-core.c
@@ -189,7 +189,12 @@ ssize_t iio_read_const_attr(struct device *dev,
 }
 EXPORT_SYMBOL(iio_read_const_attr);
 
-static int iio_device_set_clock(struct iio_dev *indio_dev, clockid_t clock_id)
+/**
+ * iio_device_set_clock() - Set current timestamping clock for the device
+ * @indio_dev: IIO device structure containing the device
+ * @clock_id: timestamping clock posix identifier to set.
+ */
+int iio_device_set_clock(struct iio_dev *indio_dev, clockid_t clock_id)
 {
 	int ret;
 	const struct iio_event_interface *ev_int = indio_dev->event_interface;
@@ -207,6 +212,7 @@ static int iio_device_set_clock(struct iio_dev *indio_dev, clockid_t clock_id)
 
 	return 0;
 }
+EXPORT_SYMBOL(iio_device_set_clock);
 
 /**
  * iio_get_time_ns() - utility function to get a time stamp for events etc
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index 74970f1..b27719c 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -194,6 +194,16 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called gp2ap020a00f.
 
+config IQS621_ALS
+	tristate "Azoteq IQS621/622 ambient light sensors"
+	depends on MFD_IQS62X || COMPILE_TEST
+	help
+	  Say Y here if you want to build support for the Azoteq IQS621
+	  and IQS622 ambient light sensors.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called iqs621-als.
+
 config SENSORS_ISL29018
 	tristate "Intersil 29018 light and proximity sensor"
 	depends on I2C
diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
index 5c1ebaf..d1c8aa3 100644
--- a/drivers/iio/light/Makefile
+++ b/drivers/iio/light/Makefile
@@ -23,6 +23,7 @@
 obj-$(CONFIG_GP2AP020A00F)	+= gp2ap020a00f.o
 obj-$(CONFIG_HID_SENSOR_ALS)	+= hid-sensor-als.o
 obj-$(CONFIG_HID_SENSOR_PROX)	+= hid-sensor-prox.o
+obj-$(CONFIG_IQS621_ALS)	+= iqs621-als.o
 obj-$(CONFIG_SENSORS_ISL29018)	+= isl29018.o
 obj-$(CONFIG_SENSORS_ISL29028)	+= isl29028.o
 obj-$(CONFIG_ISL29125)		+= isl29125.o
diff --git a/drivers/iio/light/cros_ec_light_prox.c b/drivers/iio/light/cros_ec_light_prox.c
index 7a838e2..2198b50 100644
--- a/drivers/iio/light/cros_ec_light_prox.c
+++ b/drivers/iio/light/cros_ec_light_prox.c
@@ -177,10 +177,14 @@ static int cros_ec_light_prox_probe(struct platform_device *pdev)
 	if (!indio_dev)
 		return -ENOMEM;
 
-	ret = cros_ec_sensors_core_init(pdev, indio_dev, true);
+	ret = cros_ec_sensors_core_init(pdev, indio_dev, true,
+					cros_ec_sensors_capture,
+					cros_ec_sensors_push_data);
 	if (ret)
 		return ret;
 
+	iio_buffer_set_attrs(indio_dev->buffer, cros_ec_sensor_fifo_attributes);
+
 	indio_dev->info = &cros_ec_light_prox_info;
 	state = iio_priv(indio_dev);
 	state->core.type = state->core.resp->info.type;
@@ -189,8 +193,7 @@ static int cros_ec_light_prox_probe(struct platform_device *pdev)
 
 	/* Common part */
 	channel->info_mask_shared_by_all =
-		BIT(IIO_CHAN_INFO_SAMP_FREQ) |
-		BIT(IIO_CHAN_INFO_FREQUENCY);
+		BIT(IIO_CHAN_INFO_SAMP_FREQ);
 	channel->info_mask_shared_by_all_available =
 		BIT(IIO_CHAN_INFO_SAMP_FREQ);
 	channel->scan_type.realbits = CROS_EC_SENSOR_BITS;
@@ -236,11 +239,6 @@ static int cros_ec_light_prox_probe(struct platform_device *pdev)
 
 	state->core.read_ec_sensors_data = cros_ec_sensors_read_cmd;
 
-	ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
-					      cros_ec_sensors_capture, NULL);
-	if (ret)
-		return ret;
-
 	return devm_iio_device_register(dev, indio_dev);
 }
 
@@ -258,7 +256,6 @@ MODULE_DEVICE_TABLE(platform, cros_ec_light_prox_ids);
 static struct platform_driver cros_ec_light_prox_platform_driver = {
 	.driver = {
 		.name	= "cros-ec-light-prox",
-		.pm	= &cros_ec_sensors_pm_ops,
 	},
 	.probe		= cros_ec_light_prox_probe,
 	.id_table	= cros_ec_light_prox_ids,
diff --git a/drivers/iio/light/iqs621-als.c b/drivers/iio/light/iqs621-als.c
new file mode 100644
index 0000000..b2988a7
--- /dev/null
+++ b/drivers/iio/light/iqs621-als.c
@@ -0,0 +1,617 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Azoteq IQS621/622 Ambient Light Sensors
+ *
+ * Copyright (C) 2019 Jeff LaBundy <jeff@labundy.com>
+ */
+
+#include <linux/device.h>
+#include <linux/iio/events.h>
+#include <linux/iio/iio.h>
+#include <linux/kernel.h>
+#include <linux/mfd/iqs62x.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/notifier.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define IQS621_ALS_FLAGS_LIGHT			BIT(7)
+#define IQS621_ALS_FLAGS_RANGE			GENMASK(3, 0)
+
+#define IQS621_ALS_UI_OUT			0x17
+
+#define IQS621_ALS_THRESH_DARK			0x80
+#define IQS621_ALS_THRESH_LIGHT			0x81
+
+#define IQS622_IR_RANGE				0x15
+#define IQS622_IR_FLAGS				0x16
+#define IQS622_IR_FLAGS_TOUCH			BIT(1)
+#define IQS622_IR_FLAGS_PROX			BIT(0)
+
+#define IQS622_IR_UI_OUT			0x17
+
+#define IQS622_IR_THRESH_PROX			0x91
+#define IQS622_IR_THRESH_TOUCH			0x92
+
+struct iqs621_als_private {
+	struct iqs62x_core *iqs62x;
+	struct notifier_block notifier;
+	struct mutex lock;
+	bool light_en;
+	bool range_en;
+	bool prox_en;
+	u8 als_flags;
+	u8 ir_flags_mask;
+	u8 ir_flags;
+	u8 thresh_light;
+	u8 thresh_dark;
+	u8 thresh_prox;
+};
+
+static int iqs621_als_init(struct iqs621_als_private *iqs621_als)
+{
+	struct iqs62x_core *iqs62x = iqs621_als->iqs62x;
+	unsigned int event_mask = 0;
+	int ret;
+
+	switch (iqs621_als->ir_flags_mask) {
+	case IQS622_IR_FLAGS_TOUCH:
+		ret = regmap_write(iqs62x->regmap, IQS622_IR_THRESH_TOUCH,
+				   iqs621_als->thresh_prox);
+		break;
+
+	case IQS622_IR_FLAGS_PROX:
+		ret = regmap_write(iqs62x->regmap, IQS622_IR_THRESH_PROX,
+				   iqs621_als->thresh_prox);
+		break;
+
+	default:
+		ret = regmap_write(iqs62x->regmap, IQS621_ALS_THRESH_LIGHT,
+				   iqs621_als->thresh_light);
+		if (ret)
+			return ret;
+
+		ret = regmap_write(iqs62x->regmap, IQS621_ALS_THRESH_DARK,
+				   iqs621_als->thresh_dark);
+	}
+
+	if (ret)
+		return ret;
+
+	if (iqs621_als->light_en || iqs621_als->range_en)
+		event_mask |= iqs62x->dev_desc->als_mask;
+
+	if (iqs621_als->prox_en)
+		event_mask |= iqs62x->dev_desc->ir_mask;
+
+	return regmap_update_bits(iqs62x->regmap, IQS620_GLBL_EVENT_MASK,
+				  event_mask, 0);
+}
+
+static int iqs621_als_notifier(struct notifier_block *notifier,
+			       unsigned long event_flags, void *context)
+{
+	struct iqs62x_event_data *event_data = context;
+	struct iqs621_als_private *iqs621_als;
+	struct iio_dev *indio_dev;
+	bool light_new, light_old;
+	bool prox_new, prox_old;
+	u8 range_new, range_old;
+	s64 timestamp;
+	int ret;
+
+	iqs621_als = container_of(notifier, struct iqs621_als_private,
+				  notifier);
+	indio_dev = iio_priv_to_dev(iqs621_als);
+	timestamp = iio_get_time_ns(indio_dev);
+
+	mutex_lock(&iqs621_als->lock);
+
+	if (event_flags & BIT(IQS62X_EVENT_SYS_RESET)) {
+		ret = iqs621_als_init(iqs621_als);
+		if (ret) {
+			dev_err(indio_dev->dev.parent,
+				"Failed to re-initialize device: %d\n", ret);
+			ret = NOTIFY_BAD;
+		} else {
+			ret = NOTIFY_OK;
+		}
+
+		goto err_mutex;
+	}
+
+	if (!iqs621_als->light_en && !iqs621_als->range_en &&
+	    !iqs621_als->prox_en) {
+		ret = NOTIFY_DONE;
+		goto err_mutex;
+	}
+
+	/* IQS621 only */
+	light_new = event_data->als_flags & IQS621_ALS_FLAGS_LIGHT;
+	light_old = iqs621_als->als_flags & IQS621_ALS_FLAGS_LIGHT;
+
+	if (iqs621_als->light_en && light_new && !light_old)
+		iio_push_event(indio_dev,
+			       IIO_UNMOD_EVENT_CODE(IIO_LIGHT, 0,
+						    IIO_EV_TYPE_THRESH,
+						    IIO_EV_DIR_RISING),
+			       timestamp);
+	else if (iqs621_als->light_en && !light_new && light_old)
+		iio_push_event(indio_dev,
+			       IIO_UNMOD_EVENT_CODE(IIO_LIGHT, 0,
+						    IIO_EV_TYPE_THRESH,
+						    IIO_EV_DIR_FALLING),
+			       timestamp);
+
+	/* IQS621 and IQS622 */
+	range_new = event_data->als_flags & IQS621_ALS_FLAGS_RANGE;
+	range_old = iqs621_als->als_flags & IQS621_ALS_FLAGS_RANGE;
+
+	if (iqs621_als->range_en && (range_new > range_old))
+		iio_push_event(indio_dev,
+			       IIO_UNMOD_EVENT_CODE(IIO_INTENSITY, 0,
+						    IIO_EV_TYPE_CHANGE,
+						    IIO_EV_DIR_RISING),
+			       timestamp);
+	else if (iqs621_als->range_en && (range_new < range_old))
+		iio_push_event(indio_dev,
+			       IIO_UNMOD_EVENT_CODE(IIO_INTENSITY, 0,
+						    IIO_EV_TYPE_CHANGE,
+						    IIO_EV_DIR_FALLING),
+			       timestamp);
+
+	/* IQS622 only */
+	prox_new = event_data->ir_flags & iqs621_als->ir_flags_mask;
+	prox_old = iqs621_als->ir_flags & iqs621_als->ir_flags_mask;
+
+	if (iqs621_als->prox_en && prox_new && !prox_old)
+		iio_push_event(indio_dev,
+			       IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, 0,
+						    IIO_EV_TYPE_THRESH,
+						    IIO_EV_DIR_RISING),
+			       timestamp);
+	else if (iqs621_als->prox_en && !prox_new && prox_old)
+		iio_push_event(indio_dev,
+			       IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, 0,
+						    IIO_EV_TYPE_THRESH,
+						    IIO_EV_DIR_FALLING),
+			       timestamp);
+
+	iqs621_als->als_flags = event_data->als_flags;
+	iqs621_als->ir_flags = event_data->ir_flags;
+	ret = NOTIFY_OK;
+
+err_mutex:
+	mutex_unlock(&iqs621_als->lock);
+
+	return ret;
+}
+
+static void iqs621_als_notifier_unregister(void *context)
+{
+	struct iqs621_als_private *iqs621_als = context;
+	struct iio_dev *indio_dev = iio_priv_to_dev(iqs621_als);
+	int ret;
+
+	ret = blocking_notifier_chain_unregister(&iqs621_als->iqs62x->nh,
+						 &iqs621_als->notifier);
+	if (ret)
+		dev_err(indio_dev->dev.parent,
+			"Failed to unregister notifier: %d\n", ret);
+}
+
+static int iqs621_als_read_raw(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan,
+			       int *val, int *val2, long mask)
+{
+	struct iqs621_als_private *iqs621_als = iio_priv(indio_dev);
+	struct iqs62x_core *iqs62x = iqs621_als->iqs62x;
+	int ret;
+	__le16 val_buf;
+
+	switch (chan->type) {
+	case IIO_INTENSITY:
+		ret = regmap_read(iqs62x->regmap, chan->address, val);
+		if (ret)
+			return ret;
+
+		*val &= IQS621_ALS_FLAGS_RANGE;
+		return IIO_VAL_INT;
+
+	case IIO_PROXIMITY:
+	case IIO_LIGHT:
+		ret = regmap_raw_read(iqs62x->regmap, chan->address, &val_buf,
+				      sizeof(val_buf));
+		if (ret)
+			return ret;
+
+		*val = le16_to_cpu(val_buf);
+		return IIO_VAL_INT;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int iqs621_als_read_event_config(struct iio_dev *indio_dev,
+					const struct iio_chan_spec *chan,
+					enum iio_event_type type,
+					enum iio_event_direction dir)
+{
+	struct iqs621_als_private *iqs621_als = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&iqs621_als->lock);
+
+	switch (chan->type) {
+	case IIO_LIGHT:
+		ret = iqs621_als->light_en;
+		break;
+
+	case IIO_INTENSITY:
+		ret = iqs621_als->range_en;
+		break;
+
+	case IIO_PROXIMITY:
+		ret = iqs621_als->prox_en;
+		break;
+
+	default:
+		ret = -EINVAL;
+	}
+
+	mutex_unlock(&iqs621_als->lock);
+
+	return ret;
+}
+
+static int iqs621_als_write_event_config(struct iio_dev *indio_dev,
+					 const struct iio_chan_spec *chan,
+					 enum iio_event_type type,
+					 enum iio_event_direction dir,
+					 int state)
+{
+	struct iqs621_als_private *iqs621_als = iio_priv(indio_dev);
+	struct iqs62x_core *iqs62x = iqs621_als->iqs62x;
+	unsigned int val;
+	int ret;
+
+	mutex_lock(&iqs621_als->lock);
+
+	ret = regmap_read(iqs62x->regmap, iqs62x->dev_desc->als_flags, &val);
+	if (ret)
+		goto err_mutex;
+	iqs621_als->als_flags = val;
+
+	switch (chan->type) {
+	case IIO_LIGHT:
+		ret = regmap_update_bits(iqs62x->regmap, IQS620_GLBL_EVENT_MASK,
+					 iqs62x->dev_desc->als_mask,
+					 iqs621_als->range_en || state ? 0 :
+									 0xFF);
+		if (!ret)
+			iqs621_als->light_en = state;
+		break;
+
+	case IIO_INTENSITY:
+		ret = regmap_update_bits(iqs62x->regmap, IQS620_GLBL_EVENT_MASK,
+					 iqs62x->dev_desc->als_mask,
+					 iqs621_als->light_en || state ? 0 :
+									 0xFF);
+		if (!ret)
+			iqs621_als->range_en = state;
+		break;
+
+	case IIO_PROXIMITY:
+		ret = regmap_read(iqs62x->regmap, IQS622_IR_FLAGS, &val);
+		if (ret)
+			goto err_mutex;
+		iqs621_als->ir_flags = val;
+
+		ret = regmap_update_bits(iqs62x->regmap, IQS620_GLBL_EVENT_MASK,
+					 iqs62x->dev_desc->ir_mask,
+					 state ? 0 : 0xFF);
+		if (!ret)
+			iqs621_als->prox_en = state;
+		break;
+
+	default:
+		ret = -EINVAL;
+	}
+
+err_mutex:
+	mutex_unlock(&iqs621_als->lock);
+
+	return ret;
+}
+
+static int iqs621_als_read_event_value(struct iio_dev *indio_dev,
+				       const struct iio_chan_spec *chan,
+				       enum iio_event_type type,
+				       enum iio_event_direction dir,
+				       enum iio_event_info info,
+				       int *val, int *val2)
+{
+	struct iqs621_als_private *iqs621_als = iio_priv(indio_dev);
+	int ret = IIO_VAL_INT;
+
+	mutex_lock(&iqs621_als->lock);
+
+	switch (dir) {
+	case IIO_EV_DIR_RISING:
+		*val = iqs621_als->thresh_light * 16;
+		break;
+
+	case IIO_EV_DIR_FALLING:
+		*val = iqs621_als->thresh_dark * 4;
+		break;
+
+	case IIO_EV_DIR_EITHER:
+		if (iqs621_als->ir_flags_mask == IQS622_IR_FLAGS_TOUCH)
+			*val = iqs621_als->thresh_prox * 4;
+		else
+			*val = iqs621_als->thresh_prox;
+		break;
+
+	default:
+		ret = -EINVAL;
+	}
+
+	mutex_unlock(&iqs621_als->lock);
+
+	return ret;
+}
+
+static int iqs621_als_write_event_value(struct iio_dev *indio_dev,
+					const struct iio_chan_spec *chan,
+					enum iio_event_type type,
+					enum iio_event_direction dir,
+					enum iio_event_info info,
+					int val, int val2)
+{
+	struct iqs621_als_private *iqs621_als = iio_priv(indio_dev);
+	struct iqs62x_core *iqs62x = iqs621_als->iqs62x;
+	unsigned int thresh_reg, thresh_val;
+	u8 ir_flags_mask, *thresh_cache;
+	int ret = -EINVAL;
+
+	mutex_lock(&iqs621_als->lock);
+
+	switch (dir) {
+	case IIO_EV_DIR_RISING:
+		thresh_reg = IQS621_ALS_THRESH_LIGHT;
+		thresh_val = val / 16;
+
+		thresh_cache = &iqs621_als->thresh_light;
+		ir_flags_mask = 0;
+		break;
+
+	case IIO_EV_DIR_FALLING:
+		thresh_reg = IQS621_ALS_THRESH_DARK;
+		thresh_val = val / 4;
+
+		thresh_cache = &iqs621_als->thresh_dark;
+		ir_flags_mask = 0;
+		break;
+
+	case IIO_EV_DIR_EITHER:
+		/*
+		 * The IQS622 supports two detection thresholds, both measured
+		 * in the same arbitrary units reported by read_raw: proximity
+		 * (0 through 255 in steps of 1), and touch (0 through 1020 in
+		 * steps of 4).
+		 *
+		 * Based on the single detection threshold chosen by the user,
+		 * select the hardware threshold that gives the best trade-off
+		 * between range and resolution.
+		 *
+		 * By default, the close-range (but coarse) touch threshold is
+		 * chosen during probe.
+		 */
+		switch (val) {
+		case 0 ... 255:
+			thresh_reg = IQS622_IR_THRESH_PROX;
+			thresh_val = val;
+
+			ir_flags_mask = IQS622_IR_FLAGS_PROX;
+			break;
+
+		case 256 ... 1020:
+			thresh_reg = IQS622_IR_THRESH_TOUCH;
+			thresh_val = val / 4;
+
+			ir_flags_mask = IQS622_IR_FLAGS_TOUCH;
+			break;
+
+		default:
+			goto err_mutex;
+		}
+
+		thresh_cache = &iqs621_als->thresh_prox;
+		break;
+
+	default:
+		goto err_mutex;
+	}
+
+	if (thresh_val > 0xFF)
+		goto err_mutex;
+
+	ret = regmap_write(iqs62x->regmap, thresh_reg, thresh_val);
+	if (ret)
+		goto err_mutex;
+
+	*thresh_cache = thresh_val;
+	iqs621_als->ir_flags_mask = ir_flags_mask;
+
+err_mutex:
+	mutex_unlock(&iqs621_als->lock);
+
+	return ret;
+}
+
+static const struct iio_info iqs621_als_info = {
+	.read_raw = &iqs621_als_read_raw,
+	.read_event_config = iqs621_als_read_event_config,
+	.write_event_config = iqs621_als_write_event_config,
+	.read_event_value = iqs621_als_read_event_value,
+	.write_event_value = iqs621_als_write_event_value,
+};
+
+static const struct iio_event_spec iqs621_als_range_events[] = {
+	{
+		.type = IIO_EV_TYPE_CHANGE,
+		.dir = IIO_EV_DIR_EITHER,
+		.mask_separate = BIT(IIO_EV_INFO_ENABLE),
+	},
+};
+
+static const struct iio_event_spec iqs621_als_light_events[] = {
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_EITHER,
+		.mask_separate = BIT(IIO_EV_INFO_ENABLE),
+	},
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_RISING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE),
+	},
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_FALLING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE),
+	},
+};
+
+static const struct iio_chan_spec iqs621_als_channels[] = {
+	{
+		.type = IIO_INTENSITY,
+		.address = IQS621_ALS_FLAGS,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.event_spec = iqs621_als_range_events,
+		.num_event_specs = ARRAY_SIZE(iqs621_als_range_events),
+	},
+	{
+		.type = IIO_LIGHT,
+		.address = IQS621_ALS_UI_OUT,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+		.event_spec = iqs621_als_light_events,
+		.num_event_specs = ARRAY_SIZE(iqs621_als_light_events),
+	},
+};
+
+static const struct iio_event_spec iqs622_als_prox_events[] = {
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_EITHER,
+		.mask_separate = BIT(IIO_EV_INFO_ENABLE) |
+				 BIT(IIO_EV_INFO_VALUE),
+	},
+};
+
+static const struct iio_chan_spec iqs622_als_channels[] = {
+	{
+		.type = IIO_INTENSITY,
+		.channel2 = IIO_MOD_LIGHT_BOTH,
+		.address = IQS622_ALS_FLAGS,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.event_spec = iqs621_als_range_events,
+		.num_event_specs = ARRAY_SIZE(iqs621_als_range_events),
+		.modified = true,
+	},
+	{
+		.type = IIO_INTENSITY,
+		.channel2 = IIO_MOD_LIGHT_IR,
+		.address = IQS622_IR_RANGE,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.modified = true,
+	},
+	{
+		.type = IIO_PROXIMITY,
+		.address = IQS622_IR_UI_OUT,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.event_spec = iqs622_als_prox_events,
+		.num_event_specs = ARRAY_SIZE(iqs622_als_prox_events),
+	},
+};
+
+static int iqs621_als_probe(struct platform_device *pdev)
+{
+	struct iqs62x_core *iqs62x = dev_get_drvdata(pdev->dev.parent);
+	struct iqs621_als_private *iqs621_als;
+	struct iio_dev *indio_dev;
+	unsigned int val;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*iqs621_als));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	iqs621_als = iio_priv(indio_dev);
+	iqs621_als->iqs62x = iqs62x;
+
+	if (iqs62x->dev_desc->prod_num == IQS622_PROD_NUM) {
+		ret = regmap_read(iqs62x->regmap, IQS622_IR_THRESH_TOUCH,
+				  &val);
+		if (ret)
+			return ret;
+		iqs621_als->thresh_prox = val;
+		iqs621_als->ir_flags_mask = IQS622_IR_FLAGS_TOUCH;
+
+		indio_dev->channels = iqs622_als_channels;
+		indio_dev->num_channels = ARRAY_SIZE(iqs622_als_channels);
+	} else {
+		ret = regmap_read(iqs62x->regmap, IQS621_ALS_THRESH_LIGHT,
+				  &val);
+		if (ret)
+			return ret;
+		iqs621_als->thresh_light = val;
+
+		ret = regmap_read(iqs62x->regmap, IQS621_ALS_THRESH_DARK,
+				  &val);
+		if (ret)
+			return ret;
+		iqs621_als->thresh_dark = val;
+
+		indio_dev->channels = iqs621_als_channels;
+		indio_dev->num_channels = ARRAY_SIZE(iqs621_als_channels);
+	}
+
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->dev.parent = &pdev->dev;
+	indio_dev->name = iqs62x->dev_desc->dev_name;
+	indio_dev->info = &iqs621_als_info;
+
+	mutex_init(&iqs621_als->lock);
+
+	iqs621_als->notifier.notifier_call = iqs621_als_notifier;
+	ret = blocking_notifier_chain_register(&iqs621_als->iqs62x->nh,
+					       &iqs621_als->notifier);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to register notifier: %d\n", ret);
+		return ret;
+	}
+
+	ret = devm_add_action_or_reset(&pdev->dev,
+				       iqs621_als_notifier_unregister,
+				       iqs621_als);
+	if (ret)
+		return ret;
+
+	return devm_iio_device_register(&pdev->dev, indio_dev);
+}
+
+static struct platform_driver iqs621_als_platform_driver = {
+	.driver = {
+		.name = "iqs621-als",
+	},
+	.probe = iqs621_als_probe,
+};
+module_platform_driver(iqs621_als_platform_driver);
+
+MODULE_AUTHOR("Jeff LaBundy <jeff@labundy.com>");
+MODULE_DESCRIPTION("Azoteq IQS621/622 Ambient Light Sensors");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:iqs621-als");
diff --git a/drivers/iio/position/Kconfig b/drivers/iio/position/Kconfig
new file mode 100644
index 0000000..eda67f0
--- /dev/null
+++ b/drivers/iio/position/Kconfig
@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Linear and angular position sensors
+#
+# When adding new entries keep the list in alphabetical order
+
+menu "Linear and angular position sensors"
+
+config IQS624_POS
+	tristate "Azoteq IQS624/625 angular position sensors"
+	depends on MFD_IQS62X || COMPILE_TEST
+	help
+	  Say Y here if you want to build support for the Azoteq IQS624
+	  and IQS625 angular position sensors.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called iqs624-pos.
+
+endmenu
diff --git a/drivers/iio/position/Makefile b/drivers/iio/position/Makefile
new file mode 100644
index 0000000..3cbe7a7
--- /dev/null
+++ b/drivers/iio/position/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for IIO linear and angular position sensors
+#
+
+# When adding new entries keep the list in alphabetical order
+
+obj-$(CONFIG_IQS624_POS)	+= iqs624-pos.o
diff --git a/drivers/iio/position/iqs624-pos.c b/drivers/iio/position/iqs624-pos.c
new file mode 100644
index 0000000..77096c3
--- /dev/null
+++ b/drivers/iio/position/iqs624-pos.c
@@ -0,0 +1,284 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Azoteq IQS624/625 Angular Position Sensors
+ *
+ * Copyright (C) 2019 Jeff LaBundy <jeff@labundy.com>
+ */
+
+#include <linux/device.h>
+#include <linux/iio/events.h>
+#include <linux/iio/iio.h>
+#include <linux/kernel.h>
+#include <linux/mfd/iqs62x.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/notifier.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define IQS624_POS_DEG_OUT			0x16
+
+#define IQS624_POS_SCALE1			(314159 / 180)
+#define IQS624_POS_SCALE2			100000
+
+struct iqs624_pos_private {
+	struct iqs62x_core *iqs62x;
+	struct notifier_block notifier;
+	struct mutex lock;
+	bool angle_en;
+	u16 angle;
+};
+
+static int iqs624_pos_angle_en(struct iqs62x_core *iqs62x, bool angle_en)
+{
+	unsigned int event_mask = IQS624_HALL_UI_WHL_EVENT;
+
+	/*
+	 * The IQS625 reports angular position in the form of coarse intervals,
+	 * so only interval change events are unmasked. Conversely, the IQS624
+	 * reports angular position down to one degree of resolution, so wheel
+	 * movement events are unmasked instead.
+	 */
+	if (iqs62x->dev_desc->prod_num == IQS625_PROD_NUM)
+		event_mask = IQS624_HALL_UI_INT_EVENT;
+
+	return regmap_update_bits(iqs62x->regmap, IQS624_HALL_UI, event_mask,
+				  angle_en ? 0 : 0xFF);
+}
+
+static int iqs624_pos_notifier(struct notifier_block *notifier,
+			       unsigned long event_flags, void *context)
+{
+	struct iqs62x_event_data *event_data = context;
+	struct iqs624_pos_private *iqs624_pos;
+	struct iqs62x_core *iqs62x;
+	struct iio_dev *indio_dev;
+	u16 angle = event_data->ui_data;
+	s64 timestamp;
+	int ret;
+
+	iqs624_pos = container_of(notifier, struct iqs624_pos_private,
+				  notifier);
+	indio_dev = iio_priv_to_dev(iqs624_pos);
+	timestamp = iio_get_time_ns(indio_dev);
+
+	iqs62x = iqs624_pos->iqs62x;
+	if (iqs62x->dev_desc->prod_num == IQS625_PROD_NUM)
+		angle = event_data->interval;
+
+	mutex_lock(&iqs624_pos->lock);
+
+	if (event_flags & BIT(IQS62X_EVENT_SYS_RESET)) {
+		ret = iqs624_pos_angle_en(iqs62x, iqs624_pos->angle_en);
+		if (ret) {
+			dev_err(indio_dev->dev.parent,
+				"Failed to re-initialize device: %d\n", ret);
+			ret = NOTIFY_BAD;
+		} else {
+			ret = NOTIFY_OK;
+		}
+	} else if (iqs624_pos->angle_en && (angle != iqs624_pos->angle)) {
+		iio_push_event(indio_dev,
+			       IIO_UNMOD_EVENT_CODE(IIO_ANGL, 0,
+						    IIO_EV_TYPE_CHANGE,
+						    IIO_EV_DIR_NONE),
+			       timestamp);
+
+		iqs624_pos->angle = angle;
+		ret = NOTIFY_OK;
+	} else {
+		ret = NOTIFY_DONE;
+	}
+
+	mutex_unlock(&iqs624_pos->lock);
+
+	return ret;
+}
+
+static void iqs624_pos_notifier_unregister(void *context)
+{
+	struct iqs624_pos_private *iqs624_pos = context;
+	struct iio_dev *indio_dev = iio_priv_to_dev(iqs624_pos);
+	int ret;
+
+	ret = blocking_notifier_chain_unregister(&iqs624_pos->iqs62x->nh,
+						 &iqs624_pos->notifier);
+	if (ret)
+		dev_err(indio_dev->dev.parent,
+			"Failed to unregister notifier: %d\n", ret);
+}
+
+static int iqs624_pos_angle_get(struct iqs62x_core *iqs62x, unsigned int *val)
+{
+	int ret;
+	__le16 val_buf;
+
+	if (iqs62x->dev_desc->prod_num == IQS625_PROD_NUM)
+		return regmap_read(iqs62x->regmap, iqs62x->dev_desc->interval,
+				   val);
+
+	ret = regmap_raw_read(iqs62x->regmap, IQS624_POS_DEG_OUT, &val_buf,
+			      sizeof(val_buf));
+	if (ret)
+		return ret;
+
+	*val = le16_to_cpu(val_buf);
+
+	return 0;
+}
+
+static int iqs624_pos_read_raw(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan,
+			       int *val, int *val2, long mask)
+{
+	struct iqs624_pos_private *iqs624_pos = iio_priv(indio_dev);
+	struct iqs62x_core *iqs62x = iqs624_pos->iqs62x;
+	unsigned int scale = 1;
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = iqs624_pos_angle_get(iqs62x, val);
+		if (ret)
+			return ret;
+
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_SCALE:
+		if (iqs62x->dev_desc->prod_num == IQS625_PROD_NUM) {
+			ret = regmap_read(iqs62x->regmap, IQS624_INTERVAL_DIV,
+					  &scale);
+			if (ret)
+				return ret;
+		}
+
+		*val = scale * IQS624_POS_SCALE1;
+		*val2 = IQS624_POS_SCALE2;
+		return IIO_VAL_FRACTIONAL;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int iqs624_pos_read_event_config(struct iio_dev *indio_dev,
+					const struct iio_chan_spec *chan,
+					enum iio_event_type type,
+					enum iio_event_direction dir)
+{
+	struct iqs624_pos_private *iqs624_pos = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&iqs624_pos->lock);
+	ret = iqs624_pos->angle_en;
+	mutex_unlock(&iqs624_pos->lock);
+
+	return ret;
+}
+
+static int iqs624_pos_write_event_config(struct iio_dev *indio_dev,
+					 const struct iio_chan_spec *chan,
+					 enum iio_event_type type,
+					 enum iio_event_direction dir,
+					 int state)
+{
+	struct iqs624_pos_private *iqs624_pos = iio_priv(indio_dev);
+	struct iqs62x_core *iqs62x = iqs624_pos->iqs62x;
+	unsigned int val;
+	int ret;
+
+	mutex_lock(&iqs624_pos->lock);
+
+	ret = iqs624_pos_angle_get(iqs62x, &val);
+	if (ret)
+		goto err_mutex;
+
+	ret = iqs624_pos_angle_en(iqs62x, state);
+	if (ret)
+		goto err_mutex;
+
+	iqs624_pos->angle = val;
+	iqs624_pos->angle_en = state;
+
+err_mutex:
+	mutex_unlock(&iqs624_pos->lock);
+
+	return ret;
+}
+
+static const struct iio_info iqs624_pos_info = {
+	.read_raw = &iqs624_pos_read_raw,
+	.read_event_config = iqs624_pos_read_event_config,
+	.write_event_config = iqs624_pos_write_event_config,
+};
+
+static const struct iio_event_spec iqs624_pos_events[] = {
+	{
+		.type = IIO_EV_TYPE_CHANGE,
+		.dir = IIO_EV_DIR_NONE,
+		.mask_separate = BIT(IIO_EV_INFO_ENABLE),
+	},
+};
+
+static const struct iio_chan_spec iqs624_pos_channels[] = {
+	{
+		.type = IIO_ANGL,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE),
+		.event_spec = iqs624_pos_events,
+		.num_event_specs = ARRAY_SIZE(iqs624_pos_events),
+	},
+};
+
+static int iqs624_pos_probe(struct platform_device *pdev)
+{
+	struct iqs62x_core *iqs62x = dev_get_drvdata(pdev->dev.parent);
+	struct iqs624_pos_private *iqs624_pos;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*iqs624_pos));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	iqs624_pos = iio_priv(indio_dev);
+	iqs624_pos->iqs62x = iqs62x;
+
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->dev.parent = &pdev->dev;
+	indio_dev->channels = iqs624_pos_channels;
+	indio_dev->num_channels = ARRAY_SIZE(iqs624_pos_channels);
+	indio_dev->name = iqs62x->dev_desc->dev_name;
+	indio_dev->info = &iqs624_pos_info;
+
+	mutex_init(&iqs624_pos->lock);
+
+	iqs624_pos->notifier.notifier_call = iqs624_pos_notifier;
+	ret = blocking_notifier_chain_register(&iqs624_pos->iqs62x->nh,
+					       &iqs624_pos->notifier);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to register notifier: %d\n", ret);
+		return ret;
+	}
+
+	ret = devm_add_action_or_reset(&pdev->dev,
+				       iqs624_pos_notifier_unregister,
+				       iqs624_pos);
+	if (ret)
+		return ret;
+
+	return devm_iio_device_register(&pdev->dev, indio_dev);
+}
+
+static struct platform_driver iqs624_pos_platform_driver = {
+	.driver = {
+		.name = "iqs624-pos",
+	},
+	.probe = iqs624_pos_probe,
+};
+module_platform_driver(iqs624_pos_platform_driver);
+
+MODULE_AUTHOR("Jeff LaBundy <jeff@labundy.com>");
+MODULE_DESCRIPTION("Azoteq IQS624/625 Angular Position Sensors");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:iqs624-pos");
diff --git a/drivers/iio/pressure/cros_ec_baro.c b/drivers/iio/pressure/cros_ec_baro.c
index b521beb..c079b89 100644
--- a/drivers/iio/pressure/cros_ec_baro.c
+++ b/drivers/iio/pressure/cros_ec_baro.c
@@ -134,10 +134,14 @@ static int cros_ec_baro_probe(struct platform_device *pdev)
 	if (!indio_dev)
 		return -ENOMEM;
 
-	ret = cros_ec_sensors_core_init(pdev, indio_dev, true);
+	ret = cros_ec_sensors_core_init(pdev, indio_dev, true,
+					cros_ec_sensors_capture,
+					cros_ec_sensors_push_data);
 	if (ret)
 		return ret;
 
+	iio_buffer_set_attrs(indio_dev->buffer, cros_ec_sensor_fifo_attributes);
+
 	indio_dev->info = &cros_ec_baro_info;
 	state = iio_priv(indio_dev);
 	state->core.type = state->core.resp->info.type;
@@ -147,8 +151,7 @@ static int cros_ec_baro_probe(struct platform_device *pdev)
 	channel->info_mask_separate = BIT(IIO_CHAN_INFO_RAW);
 	channel->info_mask_shared_by_all =
 		BIT(IIO_CHAN_INFO_SCALE) |
-		BIT(IIO_CHAN_INFO_SAMP_FREQ) |
-		BIT(IIO_CHAN_INFO_FREQUENCY);
+		BIT(IIO_CHAN_INFO_SAMP_FREQ);
 	channel->info_mask_shared_by_all_available =
 		BIT(IIO_CHAN_INFO_SAMP_FREQ);
 	channel->scan_type.realbits = CROS_EC_SENSOR_BITS;
@@ -182,11 +185,6 @@ static int cros_ec_baro_probe(struct platform_device *pdev)
 
 	state->core.read_ec_sensors_data = cros_ec_sensors_read_cmd;
 
-	ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
-					      cros_ec_sensors_capture, NULL);
-	if (ret)
-		return ret;
-
 	return devm_iio_device_register(dev, indio_dev);
 }
 
diff --git a/drivers/iio/temperature/Kconfig b/drivers/iio/temperature/Kconfig
index e1ccb40..f1f2a14 100644
--- a/drivers/iio/temperature/Kconfig
+++ b/drivers/iio/temperature/Kconfig
@@ -4,6 +4,16 @@
 #
 menu "Temperature sensors"
 
+config IQS620AT_TEMP
+	tristate "Azoteq IQS620AT temperature sensor"
+	depends on MFD_IQS62X || COMPILE_TEST
+	help
+	  Say Y here if you want to build support for the Azoteq IQS620AT
+	  temperature sensor.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called iqs620at-temp.
+
 config LTC2983
 	tristate "Analog Devices Multi-Sensor Digital Temperature Measurement System"
 	depends on SPI
diff --git a/drivers/iio/temperature/Makefile b/drivers/iio/temperature/Makefile
index d6b850b..90c1131 100644
--- a/drivers/iio/temperature/Makefile
+++ b/drivers/iio/temperature/Makefile
@@ -3,6 +3,7 @@
 # Makefile for industrial I/O temperature drivers
 #
 
+obj-$(CONFIG_IQS620AT_TEMP) += iqs620at-temp.o
 obj-$(CONFIG_LTC2983) += ltc2983.o
 obj-$(CONFIG_HID_SENSOR_TEMP) += hid-sensor-temperature.o
 obj-$(CONFIG_MAXIM_THERMOCOUPLE) += maxim_thermocouple.o
diff --git a/drivers/iio/temperature/iqs620at-temp.c b/drivers/iio/temperature/iqs620at-temp.c
new file mode 100644
index 0000000..3fd52b3
--- /dev/null
+++ b/drivers/iio/temperature/iqs620at-temp.c
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Azoteq IQS620AT Temperature Sensor
+ *
+ * Copyright (C) 2019 Jeff LaBundy <jeff@labundy.com>
+ */
+
+#include <linux/device.h>
+#include <linux/iio/iio.h>
+#include <linux/kernel.h>
+#include <linux/mfd/iqs62x.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define IQS620_TEMP_UI_OUT			0x1A
+
+#define IQS620_TEMP_SCALE			1000
+#define IQS620_TEMP_OFFSET			(-100)
+
+static int iqs620_temp_read_raw(struct iio_dev *indio_dev,
+				struct iio_chan_spec const *chan,
+				int *val, int *val2, long mask)
+{
+	struct iqs62x_core *iqs62x = iio_device_get_drvdata(indio_dev);
+	int ret;
+	__le16 val_buf;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = regmap_raw_read(iqs62x->regmap, IQS620_TEMP_UI_OUT,
+				      &val_buf, sizeof(val_buf));
+		if (ret)
+			return ret;
+
+		*val = le16_to_cpu(val_buf);
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_SCALE:
+		*val = IQS620_TEMP_SCALE;
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_OFFSET:
+		*val = IQS620_TEMP_OFFSET;
+		return IIO_VAL_INT;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info iqs620_temp_info = {
+	.read_raw = &iqs620_temp_read_raw,
+};
+
+static const struct iio_chan_spec iqs620_temp_channels[] = {
+	{
+		.type = IIO_TEMP,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE) |
+				      BIT(IIO_CHAN_INFO_OFFSET),
+	},
+};
+
+static int iqs620_temp_probe(struct platform_device *pdev)
+{
+	struct iqs62x_core *iqs62x = dev_get_drvdata(pdev->dev.parent);
+	struct iio_dev *indio_dev;
+
+	indio_dev = devm_iio_device_alloc(&pdev->dev, 0);
+	if (!indio_dev)
+		return -ENOMEM;
+
+	iio_device_set_drvdata(indio_dev, iqs62x);
+
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->dev.parent = &pdev->dev;
+	indio_dev->channels = iqs620_temp_channels;
+	indio_dev->num_channels = ARRAY_SIZE(iqs620_temp_channels);
+	indio_dev->name = iqs62x->dev_desc->dev_name;
+	indio_dev->info = &iqs620_temp_info;
+
+	return devm_iio_device_register(&pdev->dev, indio_dev);
+}
+
+static struct platform_driver iqs620_temp_platform_driver = {
+	.driver = {
+		.name = "iqs620at-temp",
+	},
+	.probe = iqs620_temp_probe,
+};
+module_platform_driver(iqs620_temp_platform_driver);
+
+MODULE_AUTHOR("Jeff LaBundy <jeff@labundy.com>");
+MODULE_DESCRIPTION("Azoteq IQS620AT Temperature Sensor");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:iqs620at-temp");
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 4706ff0..28de965 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -663,6 +663,16 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called ipaq-micro-keys.
 
+config KEYBOARD_IQS62X
+	tristate "Azoteq IQS620A/621/622/624/625 keys and switches"
+	depends on MFD_IQS62X
+	help
+	  Say Y here to enable key and switch support for the Azoteq IQS620A,
+	  IQS621, IQS622, IQS624 and IQS625 multi-function sensors.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called iqs62x-keys.
+
 config KEYBOARD_OMAP
 	tristate "TI OMAP keypad support"
 	depends on ARCH_OMAP1
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index f5b1752..1d689fd 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -28,6 +28,7 @@
 obj-$(CONFIG_KEYBOARD_HIL)		+= hil_kbd.o
 obj-$(CONFIG_KEYBOARD_HIL_OLD)		+= hilkbd.o
 obj-$(CONFIG_KEYBOARD_IPAQ_MICRO)	+= ipaq-micro-keys.o
+obj-$(CONFIG_KEYBOARD_IQS62X)		+= iqs62x-keys.o
 obj-$(CONFIG_KEYBOARD_IMX)		+= imx_keypad.o
 obj-$(CONFIG_KEYBOARD_IMX_SC_KEY)	+= imx_sc_key.o
 obj-$(CONFIG_KEYBOARD_HP6XX)		+= jornada680_kbd.o
diff --git a/drivers/input/keyboard/iqs62x-keys.c b/drivers/input/keyboard/iqs62x-keys.c
new file mode 100644
index 0000000..93446b2
--- /dev/null
+++ b/drivers/input/keyboard/iqs62x-keys.c
@@ -0,0 +1,335 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Azoteq IQS620A/621/622/624/625 Keys and Switches
+ *
+ * Copyright (C) 2019 Jeff LaBundy <jeff@labundy.com>
+ */
+
+#include <linux/device.h>
+#include <linux/input.h>
+#include <linux/kernel.h>
+#include <linux/mfd/iqs62x.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+enum {
+	IQS62X_SW_HALL_N,
+	IQS62X_SW_HALL_S,
+};
+
+static const char * const iqs62x_switch_names[] = {
+	[IQS62X_SW_HALL_N] = "hall-switch-north",
+	[IQS62X_SW_HALL_S] = "hall-switch-south",
+};
+
+struct iqs62x_switch_desc {
+	enum iqs62x_event_flag flag;
+	unsigned int code;
+	bool enabled;
+};
+
+struct iqs62x_keys_private {
+	struct iqs62x_core *iqs62x;
+	struct input_dev *input;
+	struct notifier_block notifier;
+	struct iqs62x_switch_desc switches[ARRAY_SIZE(iqs62x_switch_names)];
+	unsigned int keycode[IQS62X_NUM_KEYS];
+	unsigned int keycodemax;
+	u8 interval;
+};
+
+static int iqs62x_keys_parse_prop(struct platform_device *pdev,
+				  struct iqs62x_keys_private *iqs62x_keys)
+{
+	struct fwnode_handle *child;
+	unsigned int val;
+	int ret, i;
+
+	ret = device_property_count_u32(&pdev->dev, "linux,keycodes");
+	if (ret > IQS62X_NUM_KEYS) {
+		dev_err(&pdev->dev, "Too many keycodes present\n");
+		return -EINVAL;
+	} else if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to count keycodes: %d\n", ret);
+		return ret;
+	}
+	iqs62x_keys->keycodemax = ret;
+
+	ret = device_property_read_u32_array(&pdev->dev, "linux,keycodes",
+					     iqs62x_keys->keycode,
+					     iqs62x_keys->keycodemax);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to read keycodes: %d\n", ret);
+		return ret;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(iqs62x_keys->switches); i++) {
+		child = device_get_named_child_node(&pdev->dev,
+						    iqs62x_switch_names[i]);
+		if (!child)
+			continue;
+
+		ret = fwnode_property_read_u32(child, "linux,code", &val);
+		if (ret) {
+			dev_err(&pdev->dev, "Failed to read switch code: %d\n",
+				ret);
+			return ret;
+		}
+		iqs62x_keys->switches[i].code = val;
+		iqs62x_keys->switches[i].enabled = true;
+
+		if (fwnode_property_present(child, "azoteq,use-prox"))
+			iqs62x_keys->switches[i].flag = (i == IQS62X_SW_HALL_N ?
+							 IQS62X_EVENT_HALL_N_P :
+							 IQS62X_EVENT_HALL_S_P);
+		else
+			iqs62x_keys->switches[i].flag = (i == IQS62X_SW_HALL_N ?
+							 IQS62X_EVENT_HALL_N_T :
+							 IQS62X_EVENT_HALL_S_T);
+	}
+
+	return 0;
+}
+
+static int iqs62x_keys_init(struct iqs62x_keys_private *iqs62x_keys)
+{
+	struct iqs62x_core *iqs62x = iqs62x_keys->iqs62x;
+	enum iqs62x_event_flag flag;
+	unsigned int event_reg, val;
+	unsigned int event_mask = 0;
+	int ret, i;
+
+	switch (iqs62x->dev_desc->prod_num) {
+	case IQS620_PROD_NUM:
+	case IQS621_PROD_NUM:
+	case IQS622_PROD_NUM:
+		event_reg = IQS620_GLBL_EVENT_MASK;
+
+		/*
+		 * Discreet button, hysteresis and SAR UI flags represent keys
+		 * and are unmasked if mapped to a valid keycode.
+		 */
+		for (i = 0; i < iqs62x_keys->keycodemax; i++) {
+			if (iqs62x_keys->keycode[i] == KEY_RESERVED)
+				continue;
+
+			if (iqs62x_events[i].reg == IQS62X_EVENT_PROX)
+				event_mask |= iqs62x->dev_desc->prox_mask;
+			else if (iqs62x_events[i].reg == IQS62X_EVENT_HYST)
+				event_mask |= (iqs62x->dev_desc->hyst_mask |
+					       iqs62x->dev_desc->sar_mask);
+		}
+
+		ret = regmap_read(iqs62x->regmap, iqs62x->dev_desc->hall_flags,
+				  &val);
+		if (ret)
+			return ret;
+
+		/*
+		 * Hall UI flags represent switches and are unmasked if their
+		 * corresponding child nodes are present.
+		 */
+		for (i = 0; i < ARRAY_SIZE(iqs62x_keys->switches); i++) {
+			if (!(iqs62x_keys->switches[i].enabled))
+				continue;
+
+			flag = iqs62x_keys->switches[i].flag;
+
+			if (iqs62x_events[flag].reg != IQS62X_EVENT_HALL)
+				continue;
+
+			event_mask |= iqs62x->dev_desc->hall_mask;
+
+			input_report_switch(iqs62x_keys->input,
+					    iqs62x_keys->switches[i].code,
+					    (val & iqs62x_events[flag].mask) ==
+					    iqs62x_events[flag].val);
+		}
+
+		input_sync(iqs62x_keys->input);
+		break;
+
+	case IQS624_PROD_NUM:
+		event_reg = IQS624_HALL_UI;
+
+		/*
+		 * Interval change events represent keys and are unmasked if
+		 * either wheel movement flag is mapped to a valid keycode.
+		 */
+		if (iqs62x_keys->keycode[IQS62X_EVENT_WHEEL_UP] != KEY_RESERVED)
+			event_mask |= IQS624_HALL_UI_INT_EVENT;
+
+		if (iqs62x_keys->keycode[IQS62X_EVENT_WHEEL_DN] != KEY_RESERVED)
+			event_mask |= IQS624_HALL_UI_INT_EVENT;
+
+		ret = regmap_read(iqs62x->regmap, iqs62x->dev_desc->interval,
+				  &val);
+		if (ret)
+			return ret;
+
+		iqs62x_keys->interval = val;
+		break;
+
+	default:
+		return 0;
+	}
+
+	return regmap_update_bits(iqs62x->regmap, event_reg, event_mask, 0);
+}
+
+static int iqs62x_keys_notifier(struct notifier_block *notifier,
+				unsigned long event_flags, void *context)
+{
+	struct iqs62x_event_data *event_data = context;
+	struct iqs62x_keys_private *iqs62x_keys;
+	int ret, i;
+
+	iqs62x_keys = container_of(notifier, struct iqs62x_keys_private,
+				   notifier);
+
+	if (event_flags & BIT(IQS62X_EVENT_SYS_RESET)) {
+		ret = iqs62x_keys_init(iqs62x_keys);
+		if (ret) {
+			dev_err(iqs62x_keys->input->dev.parent,
+				"Failed to re-initialize device: %d\n", ret);
+			return NOTIFY_BAD;
+		}
+
+		return NOTIFY_OK;
+	}
+
+	for (i = 0; i < iqs62x_keys->keycodemax; i++) {
+		if (iqs62x_events[i].reg == IQS62X_EVENT_WHEEL &&
+		    event_data->interval == iqs62x_keys->interval)
+			continue;
+
+		input_report_key(iqs62x_keys->input, iqs62x_keys->keycode[i],
+				 event_flags & BIT(i));
+	}
+
+	for (i = 0; i < ARRAY_SIZE(iqs62x_keys->switches); i++)
+		if (iqs62x_keys->switches[i].enabled)
+			input_report_switch(iqs62x_keys->input,
+					    iqs62x_keys->switches[i].code,
+					    event_flags &
+					    BIT(iqs62x_keys->switches[i].flag));
+
+	input_sync(iqs62x_keys->input);
+
+	if (event_data->interval == iqs62x_keys->interval)
+		return NOTIFY_OK;
+
+	/*
+	 * Each frame contains at most one wheel event (up or down), in which
+	 * case a complementary release cycle is emulated.
+	 */
+	if (event_flags & BIT(IQS62X_EVENT_WHEEL_UP)) {
+		input_report_key(iqs62x_keys->input,
+				 iqs62x_keys->keycode[IQS62X_EVENT_WHEEL_UP],
+				 0);
+		input_sync(iqs62x_keys->input);
+	} else if (event_flags & BIT(IQS62X_EVENT_WHEEL_DN)) {
+		input_report_key(iqs62x_keys->input,
+				 iqs62x_keys->keycode[IQS62X_EVENT_WHEEL_DN],
+				 0);
+		input_sync(iqs62x_keys->input);
+	}
+
+	iqs62x_keys->interval = event_data->interval;
+
+	return NOTIFY_OK;
+}
+
+static int iqs62x_keys_probe(struct platform_device *pdev)
+{
+	struct iqs62x_core *iqs62x = dev_get_drvdata(pdev->dev.parent);
+	struct iqs62x_keys_private *iqs62x_keys;
+	struct input_dev *input;
+	int ret, i;
+
+	iqs62x_keys = devm_kzalloc(&pdev->dev, sizeof(*iqs62x_keys),
+				   GFP_KERNEL);
+	if (!iqs62x_keys)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, iqs62x_keys);
+
+	ret = iqs62x_keys_parse_prop(pdev, iqs62x_keys);
+	if (ret)
+		return ret;
+
+	input = devm_input_allocate_device(&pdev->dev);
+	if (!input)
+		return -ENOMEM;
+
+	input->keycodemax = iqs62x_keys->keycodemax;
+	input->keycode = iqs62x_keys->keycode;
+	input->keycodesize = sizeof(*iqs62x_keys->keycode);
+
+	input->name = iqs62x->dev_desc->dev_name;
+	input->id.bustype = BUS_I2C;
+
+	for (i = 0; i < iqs62x_keys->keycodemax; i++)
+		if (iqs62x_keys->keycode[i] != KEY_RESERVED)
+			input_set_capability(input, EV_KEY,
+					     iqs62x_keys->keycode[i]);
+
+	for (i = 0; i < ARRAY_SIZE(iqs62x_keys->switches); i++)
+		if (iqs62x_keys->switches[i].enabled)
+			input_set_capability(input, EV_SW,
+					     iqs62x_keys->switches[i].code);
+
+	iqs62x_keys->iqs62x = iqs62x;
+	iqs62x_keys->input = input;
+
+	ret = iqs62x_keys_init(iqs62x_keys);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to initialize device: %d\n", ret);
+		return ret;
+	}
+
+	ret = input_register_device(iqs62x_keys->input);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to register device: %d\n", ret);
+		return ret;
+	}
+
+	iqs62x_keys->notifier.notifier_call = iqs62x_keys_notifier;
+	ret = blocking_notifier_chain_register(&iqs62x_keys->iqs62x->nh,
+					       &iqs62x_keys->notifier);
+	if (ret)
+		dev_err(&pdev->dev, "Failed to register notifier: %d\n", ret);
+
+	return ret;
+}
+
+static int iqs62x_keys_remove(struct platform_device *pdev)
+{
+	struct iqs62x_keys_private *iqs62x_keys = platform_get_drvdata(pdev);
+	int ret;
+
+	ret = blocking_notifier_chain_unregister(&iqs62x_keys->iqs62x->nh,
+						 &iqs62x_keys->notifier);
+	if (ret)
+		dev_err(&pdev->dev, "Failed to unregister notifier: %d\n", ret);
+
+	return ret;
+}
+
+static struct platform_driver iqs62x_keys_platform_driver = {
+	.driver = {
+		.name = "iqs62x-keys",
+	},
+	.probe = iqs62x_keys_probe,
+	.remove = iqs62x_keys_remove,
+};
+module_platform_driver(iqs62x_keys_platform_driver);
+
+MODULE_AUTHOR("Jeff LaBundy <jeff@labundy.com>");
+MODULE_DESCRIPTION("Azoteq IQS620A/621/622/624/625 Keys and Switches");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:iqs62x-keys");
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index dc974c2..08e919d 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -530,6 +530,17 @@ static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = {
 			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo LaVie Z"),
 		},
 	},
+	{
+		/*
+		 * Acer Aspire 5738z
+		 * Touchpad stops working in mux mode when dis- + re-enabled
+		 * with the touchpad enable/disable toggle hotkey
+		 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5738"),
+		},
+	},
 	{ }
 };
 
diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c
index 49117996..14c577c 100644
--- a/drivers/input/touchscreen/elants_i2c.c
+++ b/drivers/input/touchscreen/elants_i2c.c
@@ -1309,6 +1309,7 @@ static int elants_i2c_probe(struct i2c_client *client,
 	input_set_abs_params(ts->input, ABS_MT_PRESSURE, 0, 255, 0, 0);
 	input_abs_set_res(ts->input, ABS_MT_POSITION_X, ts->x_res);
 	input_abs_set_res(ts->input, ABS_MT_POSITION_Y, ts->y_res);
+	input_abs_set_res(ts->input, ABS_MT_TOUCH_MAJOR, 1);
 
 	error = input_register_device(ts->input);
 	if (error) {
diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
index 0403102..02c75ea 100644
--- a/drivers/input/touchscreen/goodix.c
+++ b/drivers/input/touchscreen/goodix.c
@@ -29,14 +29,68 @@
 #include <linux/of.h>
 #include <asm/unaligned.h>
 
+#define GOODIX_GPIO_INT_NAME		"irq"
+#define GOODIX_GPIO_RST_NAME		"reset"
+
+#define GOODIX_MAX_HEIGHT		4096
+#define GOODIX_MAX_WIDTH		4096
+#define GOODIX_INT_TRIGGER		1
+#define GOODIX_CONTACT_SIZE		8
+#define GOODIX_MAX_CONTACT_SIZE		9
+#define GOODIX_MAX_CONTACTS		10
+#define GOODIX_MAX_KEYS			7
+
+#define GOODIX_CONFIG_MIN_LENGTH	186
+#define GOODIX_CONFIG_911_LENGTH	186
+#define GOODIX_CONFIG_967_LENGTH	228
+#define GOODIX_CONFIG_GT9X_LENGTH	240
+#define GOODIX_CONFIG_MAX_LENGTH	240
+
+/* Register defines */
+#define GOODIX_REG_COMMAND		0x8040
+#define GOODIX_CMD_SCREEN_OFF		0x05
+
+#define GOODIX_READ_COOR_ADDR		0x814E
+#define GOODIX_GT1X_REG_CONFIG_DATA	0x8050
+#define GOODIX_GT9X_REG_CONFIG_DATA	0x8047
+#define GOODIX_REG_ID			0x8140
+
+#define GOODIX_BUFFER_STATUS_READY	BIT(7)
+#define GOODIX_HAVE_KEY			BIT(4)
+#define GOODIX_BUFFER_STATUS_TIMEOUT	20
+
+#define RESOLUTION_LOC		1
+#define MAX_CONTACTS_LOC	5
+#define TRIGGER_LOC		6
+
+/* Our special handling for GPIO accesses through ACPI is x86 specific */
+#if defined CONFIG_X86 && defined CONFIG_ACPI
+#define ACPI_GPIO_SUPPORT
+#endif
+
 struct goodix_ts_data;
 
+enum goodix_irq_pin_access_method {
+	IRQ_PIN_ACCESS_NONE,
+	IRQ_PIN_ACCESS_GPIO,
+	IRQ_PIN_ACCESS_ACPI_GPIO,
+	IRQ_PIN_ACCESS_ACPI_METHOD,
+};
+
 struct goodix_chip_data {
 	u16 config_addr;
 	int config_len;
-	int (*check_config)(struct goodix_ts_data *, const struct firmware *);
+	int (*check_config)(struct goodix_ts_data *ts, const u8 *cfg, int len);
+	void (*calc_config_checksum)(struct goodix_ts_data *ts);
 };
 
+struct goodix_chip_id {
+	const char *id;
+	const struct goodix_chip_data *data;
+};
+
+#define GOODIX_ID_MAX_LEN	4
+
 struct goodix_ts_data {
 	struct i2c_client *client;
 	struct input_dev *input_dev;
@@ -48,71 +102,72 @@ struct goodix_ts_data {
 	struct regulator *vddio;
 	struct gpio_desc *gpiod_int;
 	struct gpio_desc *gpiod_rst;
-	u16 id;
+	int gpio_count;
+	int gpio_int_idx;
+	char id[GOODIX_ID_MAX_LEN + 1];
 	u16 version;
 	const char *cfg_name;
+	bool reset_controller_at_probe;
+	bool load_cfg_from_disk;
 	struct completion firmware_loading_complete;
 	unsigned long irq_flags;
+	enum goodix_irq_pin_access_method irq_pin_access_method;
 	unsigned int contact_size;
+	u8 config[GOODIX_CONFIG_MAX_LENGTH];
+	unsigned short keymap[GOODIX_MAX_KEYS];
 };
 
-#define GOODIX_GPIO_INT_NAME		"irq"
-#define GOODIX_GPIO_RST_NAME		"reset"
-
-#define GOODIX_MAX_HEIGHT		4096
-#define GOODIX_MAX_WIDTH		4096
-#define GOODIX_INT_TRIGGER		1
-#define GOODIX_CONTACT_SIZE		8
-#define GOODIX_MAX_CONTACT_SIZE		9
-#define GOODIX_MAX_CONTACTS		10
-
-#define GOODIX_CONFIG_MAX_LENGTH	240
-#define GOODIX_CONFIG_911_LENGTH	186
-#define GOODIX_CONFIG_967_LENGTH	228
-
-/* Register defines */
-#define GOODIX_REG_COMMAND		0x8040
-#define GOODIX_CMD_SCREEN_OFF		0x05
-
-#define GOODIX_READ_COOR_ADDR		0x814E
-#define GOODIX_GT1X_REG_CONFIG_DATA	0x8050
-#define GOODIX_GT9X_REG_CONFIG_DATA	0x8047
-#define GOODIX_REG_ID			0x8140
-
-#define GOODIX_BUFFER_STATUS_READY	BIT(7)
-#define GOODIX_BUFFER_STATUS_TIMEOUT	20
-
-#define RESOLUTION_LOC		1
-#define MAX_CONTACTS_LOC	5
-#define TRIGGER_LOC		6
-
 static int goodix_check_cfg_8(struct goodix_ts_data *ts,
-			const struct firmware *cfg);
+			      const u8 *cfg, int len);
 static int goodix_check_cfg_16(struct goodix_ts_data *ts,
-			const struct firmware *cfg);
+			       const u8 *cfg, int len);
+static void goodix_calc_cfg_checksum_8(struct goodix_ts_data *ts);
+static void goodix_calc_cfg_checksum_16(struct goodix_ts_data *ts);
 
 static const struct goodix_chip_data gt1x_chip_data = {
 	.config_addr		= GOODIX_GT1X_REG_CONFIG_DATA,
-	.config_len		= GOODIX_CONFIG_MAX_LENGTH,
+	.config_len		= GOODIX_CONFIG_GT9X_LENGTH,
 	.check_config		= goodix_check_cfg_16,
+	.calc_config_checksum	= goodix_calc_cfg_checksum_16,
 };
 
 static const struct goodix_chip_data gt911_chip_data = {
 	.config_addr		= GOODIX_GT9X_REG_CONFIG_DATA,
 	.config_len		= GOODIX_CONFIG_911_LENGTH,
 	.check_config		= goodix_check_cfg_8,
+	.calc_config_checksum	= goodix_calc_cfg_checksum_8,
 };
 
 static const struct goodix_chip_data gt967_chip_data = {
 	.config_addr		= GOODIX_GT9X_REG_CONFIG_DATA,
 	.config_len		= GOODIX_CONFIG_967_LENGTH,
 	.check_config		= goodix_check_cfg_8,
+	.calc_config_checksum	= goodix_calc_cfg_checksum_8,
 };
 
 static const struct goodix_chip_data gt9x_chip_data = {
 	.config_addr		= GOODIX_GT9X_REG_CONFIG_DATA,
-	.config_len		= GOODIX_CONFIG_MAX_LENGTH,
+	.config_len		= GOODIX_CONFIG_GT9X_LENGTH,
 	.check_config		= goodix_check_cfg_8,
+	.calc_config_checksum	= goodix_calc_cfg_checksum_8,
+};
+
+static const struct goodix_chip_id goodix_chip_ids[] = {
+	{ .id = "1151", .data = &gt1x_chip_data },
+	{ .id = "5663", .data = &gt1x_chip_data },
+	{ .id = "5688", .data = &gt1x_chip_data },
+	{ .id = "917S", .data = &gt1x_chip_data },
+
+	{ .id = "911", .data = &gt911_chip_data },
+	{ .id = "9271", .data = &gt911_chip_data },
+	{ .id = "9110", .data = &gt911_chip_data },
+	{ .id = "927", .data = &gt911_chip_data },
+	{ .id = "928", .data = &gt911_chip_data },
+
+	{ .id = "912", .data = &gt967_chip_data },
+	{ .id = "9147", .data = &gt967_chip_data },
+	{ .id = "967", .data = &gt967_chip_data },
+	{ }
 };
 
 static const unsigned long goodix_irq_flags[] = {
@@ -168,6 +223,22 @@ static const struct dmi_system_id nine_bytes_report[] = {
 	{}
 };
 
+/*
+ * Those tablets have their x coordinate inverted
+ */
+static const struct dmi_system_id inverted_x_screen[] = {
+#if defined(CONFIG_DMI) && defined(CONFIG_X86)
+	{
+		.ident = "Cube I15-TC",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Cube"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "I15-TC")
+		},
+	},
+#endif
+	{}
+};
+
 /**
  * goodix_i2c_read - read data from a register of the i2c slave device.
  *
@@ -235,28 +306,16 @@ static int goodix_i2c_write_u8(struct i2c_client *client, u16 reg, u8 value)
 	return goodix_i2c_write(client, reg, &value, sizeof(value));
 }
 
-static const struct goodix_chip_data *goodix_get_chip_data(u16 id)
+static const struct goodix_chip_data *goodix_get_chip_data(const char *id)
 {
-	switch (id) {
-	case 1151:
-	case 5663:
-	case 5688:
-		return &gt1x_chip_data;
+	unsigned int i;
 
-	case 911:
-	case 9271:
-	case 9110:
-	case 927:
-	case 928:
-		return &gt911_chip_data;
-
-	case 912:
-	case 967:
-		return &gt967_chip_data;
-
-	default:
-		return &gt9x_chip_data;
+	for (i = 0; goodix_chip_ids[i].id; i++) {
+		if (!strcmp(goodix_chip_ids[i].id, id))
+			return goodix_chip_ids[i].data;
 	}
+
+	return &gt9x_chip_data;
 }
 
 static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data)
@@ -264,6 +323,13 @@ static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data)
 	unsigned long max_timeout;
 	int touch_num;
 	int error;
+	u16 addr = GOODIX_READ_COOR_ADDR;
+	/*
+	 * We are going to read 1-byte header,
+	 * ts->contact_size * max(1, touch_num) bytes of coordinates
+	 * and 1-byte footer which contains the touch-key code.
+	 */
+	const int header_contact_keycode_size = 1 + ts->contact_size + 1;
 
 	/*
 	 * The 'buffer status' bit, which indicates that the data is valid, is
@@ -272,8 +338,8 @@ static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data)
 	 */
 	max_timeout = jiffies + msecs_to_jiffies(GOODIX_BUFFER_STATUS_TIMEOUT);
 	do {
-		error = goodix_i2c_read(ts->client, GOODIX_READ_COOR_ADDR,
-					data, ts->contact_size + 1);
+		error = goodix_i2c_read(ts->client, addr, data,
+					header_contact_keycode_size);
 		if (error) {
 			dev_err(&ts->client->dev, "I2C transfer error: %d\n",
 					error);
@@ -286,11 +352,10 @@ static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data)
 				return -EPROTO;
 
 			if (touch_num > 1) {
-				data += 1 + ts->contact_size;
+				addr += header_contact_keycode_size;
+				data += header_contact_keycode_size;
 				error = goodix_i2c_read(ts->client,
-						GOODIX_READ_COOR_ADDR +
-							1 + ts->contact_size,
-						data,
+						addr, data,
 						ts->contact_size *
 							(touch_num - 1));
 				if (error)
@@ -307,7 +372,7 @@ static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data)
 	 * The Goodix panel will send spurious interrupts after a
 	 * 'finger up' event, which will always cause a timeout.
 	 */
-	return 0;
+	return -ENOMSG;
 }
 
 static void goodix_ts_report_touch_8b(struct goodix_ts_data *ts, u8 *coor_data)
@@ -340,6 +405,25 @@ static void goodix_ts_report_touch_9b(struct goodix_ts_data *ts, u8 *coor_data)
 	input_report_abs(ts->input_dev, ABS_MT_WIDTH_MAJOR, input_w);
 }
 
+static void goodix_ts_report_key(struct goodix_ts_data *ts, u8 *data)
+{
+	int touch_num;
+	u8 key_value;
+	int i;
+
+	if (data[0] & GOODIX_HAVE_KEY) {
+		touch_num = data[0] & 0x0f;
+		key_value = data[1 + ts->contact_size * touch_num];
+		for (i = 0; i < GOODIX_MAX_KEYS; i++)
+			if (key_value & BIT(i))
+				input_report_key(ts->input_dev,
+						 ts->keymap[i], 1);
+	} else {
+		for (i = 0; i < GOODIX_MAX_KEYS; i++)
+			input_report_key(ts->input_dev, ts->keymap[i], 0);
+	}
+}
+
 /**
  * goodix_process_events - Process incoming events
  *
@@ -350,7 +434,7 @@ static void goodix_ts_report_touch_9b(struct goodix_ts_data *ts, u8 *coor_data)
  */
 static void goodix_process_events(struct goodix_ts_data *ts)
 {
-	u8  point_data[1 + GOODIX_MAX_CONTACT_SIZE * GOODIX_MAX_CONTACTS];
+	u8  point_data[2 + GOODIX_MAX_CONTACT_SIZE * GOODIX_MAX_CONTACTS];
 	int touch_num;
 	int i;
 
@@ -358,11 +442,7 @@ static void goodix_process_events(struct goodix_ts_data *ts)
 	if (touch_num < 0)
 		return;
 
-	/*
-	 * Bit 4 of the first byte reports the status of the capacitive
-	 * Windows/Home button.
-	 */
-	input_report_key(ts->input_dev, KEY_LEFTMETA, point_data[0] & BIT(4));
+	goodix_ts_report_key(ts, point_data);
 
 	for (i = 0; i < touch_num; i++)
 		if (ts->contact_size == 9)
@@ -406,22 +486,21 @@ static int goodix_request_irq(struct goodix_ts_data *ts)
 					 ts->irq_flags, ts->client->name, ts);
 }
 
-static int goodix_check_cfg_8(struct goodix_ts_data *ts,
-			const struct firmware *cfg)
+static int goodix_check_cfg_8(struct goodix_ts_data *ts, const u8 *cfg, int len)
 {
-	int i, raw_cfg_len = cfg->size - 2;
+	int i, raw_cfg_len = len - 2;
 	u8 check_sum = 0;
 
 	for (i = 0; i < raw_cfg_len; i++)
-		check_sum += cfg->data[i];
+		check_sum += cfg[i];
 	check_sum = (~check_sum) + 1;
-	if (check_sum != cfg->data[raw_cfg_len]) {
+	if (check_sum != cfg[raw_cfg_len]) {
 		dev_err(&ts->client->dev,
 			"The checksum of the config fw is not correct");
 		return -EINVAL;
 	}
 
-	if (cfg->data[raw_cfg_len + 1] != 1) {
+	if (cfg[raw_cfg_len + 1] != 1) {
 		dev_err(&ts->client->dev,
 			"Config fw must have Config_Fresh register set");
 		return -EINVAL;
@@ -430,22 +509,35 @@ static int goodix_check_cfg_8(struct goodix_ts_data *ts,
 	return 0;
 }
 
-static int goodix_check_cfg_16(struct goodix_ts_data *ts,
-			const struct firmware *cfg)
+static void goodix_calc_cfg_checksum_8(struct goodix_ts_data *ts)
 {
-	int i, raw_cfg_len = cfg->size - 3;
+	int i, raw_cfg_len = ts->chip->config_len - 2;
+	u8 check_sum = 0;
+
+	for (i = 0; i < raw_cfg_len; i++)
+		check_sum += ts->config[i];
+	check_sum = (~check_sum) + 1;
+
+	ts->config[raw_cfg_len] = check_sum;
+	ts->config[raw_cfg_len + 1] = 1; /* Set "config_fresh" bit */
+}
+
+static int goodix_check_cfg_16(struct goodix_ts_data *ts, const u8 *cfg,
+			       int len)
+{
+	int i, raw_cfg_len = len - 3;
 	u16 check_sum = 0;
 
 	for (i = 0; i < raw_cfg_len; i += 2)
-		check_sum += get_unaligned_be16(&cfg->data[i]);
+		check_sum += get_unaligned_be16(&cfg[i]);
 	check_sum = (~check_sum) + 1;
-	if (check_sum != get_unaligned_be16(&cfg->data[raw_cfg_len])) {
+	if (check_sum != get_unaligned_be16(&cfg[raw_cfg_len])) {
 		dev_err(&ts->client->dev,
 			"The checksum of the config fw is not correct");
 		return -EINVAL;
 	}
 
-	if (cfg->data[raw_cfg_len + 2] != 1) {
+	if (cfg[raw_cfg_len + 2] != 1) {
 		dev_err(&ts->client->dev,
 			"Config fw must have Config_Fresh register set");
 		return -EINVAL;
@@ -454,22 +546,35 @@ static int goodix_check_cfg_16(struct goodix_ts_data *ts,
 	return 0;
 }
 
+static void goodix_calc_cfg_checksum_16(struct goodix_ts_data *ts)
+{
+	int i, raw_cfg_len = ts->chip->config_len - 3;
+	u16 check_sum = 0;
+
+	for (i = 0; i < raw_cfg_len; i += 2)
+		check_sum += get_unaligned_be16(&ts->config[i]);
+	check_sum = (~check_sum) + 1;
+
+	put_unaligned_be16(check_sum, &ts->config[raw_cfg_len]);
+	ts->config[raw_cfg_len + 2] = 1; /* Set "config_fresh" bit */
+}
+
 /**
  * goodix_check_cfg - Checks if config fw is valid
  *
  * @ts: goodix_ts_data pointer
  * @cfg: firmware config data
  */
-static int goodix_check_cfg(struct goodix_ts_data *ts,
-			    const struct firmware *cfg)
+static int goodix_check_cfg(struct goodix_ts_data *ts, const u8 *cfg, int len)
 {
-	if (cfg->size > GOODIX_CONFIG_MAX_LENGTH) {
+	if (len < GOODIX_CONFIG_MIN_LENGTH ||
+	    len > GOODIX_CONFIG_MAX_LENGTH) {
 		dev_err(&ts->client->dev,
 			"The length of the config fw is not correct");
 		return -EINVAL;
 	}
 
-	return ts->chip->check_config(ts, cfg);
+	return ts->chip->check_config(ts, cfg, len);
 }
 
 /**
@@ -478,17 +583,15 @@ static int goodix_check_cfg(struct goodix_ts_data *ts,
  * @ts: goodix_ts_data pointer
  * @cfg: config firmware to write to device
  */
-static int goodix_send_cfg(struct goodix_ts_data *ts,
-			   const struct firmware *cfg)
+static int goodix_send_cfg(struct goodix_ts_data *ts, const u8 *cfg, int len)
 {
 	int error;
 
-	error = goodix_check_cfg(ts, cfg);
+	error = goodix_check_cfg(ts, cfg, len);
 	if (error)
 		return error;
 
-	error = goodix_i2c_write(ts->client, ts->chip->config_addr, cfg->data,
-				 cfg->size);
+	error = goodix_i2c_write(ts->client, ts->chip->config_addr, cfg, len);
 	if (error) {
 		dev_err(&ts->client->dev, "Failed to write config data: %d",
 			error);
@@ -502,17 +605,93 @@ static int goodix_send_cfg(struct goodix_ts_data *ts,
 	return 0;
 }
 
+#ifdef ACPI_GPIO_SUPPORT
+static int goodix_pin_acpi_direction_input(struct goodix_ts_data *ts)
+{
+	acpi_handle handle = ACPI_HANDLE(&ts->client->dev);
+	acpi_status status;
+
+	status = acpi_evaluate_object(handle, "INTI", NULL, NULL);
+	return ACPI_SUCCESS(status) ? 0 : -EIO;
+}
+
+static int goodix_pin_acpi_output_method(struct goodix_ts_data *ts, int value)
+{
+	acpi_handle handle = ACPI_HANDLE(&ts->client->dev);
+	acpi_status status;
+
+	status = acpi_execute_simple_method(handle, "INTO", value);
+	return ACPI_SUCCESS(status) ? 0 : -EIO;
+}
+#else
+static int goodix_pin_acpi_direction_input(struct goodix_ts_data *ts)
+{
+	dev_err(&ts->client->dev,
+		"%s called on device without ACPI support\n", __func__);
+	return -EINVAL;
+}
+
+static int goodix_pin_acpi_output_method(struct goodix_ts_data *ts, int value)
+{
+	dev_err(&ts->client->dev,
+		"%s called on device without ACPI support\n", __func__);
+	return -EINVAL;
+}
+#endif
+
+static int goodix_irq_direction_output(struct goodix_ts_data *ts, int value)
+{
+	switch (ts->irq_pin_access_method) {
+	case IRQ_PIN_ACCESS_NONE:
+		dev_err(&ts->client->dev,
+			"%s called without an irq_pin_access_method set\n",
+			__func__);
+		return -EINVAL;
+	case IRQ_PIN_ACCESS_GPIO:
+		return gpiod_direction_output(ts->gpiod_int, value);
+	case IRQ_PIN_ACCESS_ACPI_GPIO:
+		/*
+		 * The IRQ pin triggers on a falling edge, so its gets marked
+		 * as active-low, use output_raw to avoid the value inversion.
+		 */
+		return gpiod_direction_output_raw(ts->gpiod_int, value);
+	case IRQ_PIN_ACCESS_ACPI_METHOD:
+		return goodix_pin_acpi_output_method(ts, value);
+	}
+
+	return -EINVAL; /* Never reached */
+}
+
+static int goodix_irq_direction_input(struct goodix_ts_data *ts)
+{
+	switch (ts->irq_pin_access_method) {
+	case IRQ_PIN_ACCESS_NONE:
+		dev_err(&ts->client->dev,
+			"%s called without an irq_pin_access_method set\n",
+			__func__);
+		return -EINVAL;
+	case IRQ_PIN_ACCESS_GPIO:
+		return gpiod_direction_input(ts->gpiod_int);
+	case IRQ_PIN_ACCESS_ACPI_GPIO:
+		return gpiod_direction_input(ts->gpiod_int);
+	case IRQ_PIN_ACCESS_ACPI_METHOD:
+		return goodix_pin_acpi_direction_input(ts);
+	}
+
+	return -EINVAL; /* Never reached */
+}
+
 static int goodix_int_sync(struct goodix_ts_data *ts)
 {
 	int error;
 
-	error = gpiod_direction_output(ts->gpiod_int, 0);
+	error = goodix_irq_direction_output(ts, 0);
 	if (error)
 		return error;
 
 	msleep(50);				/* T5: 50ms */
 
-	error = gpiod_direction_input(ts->gpiod_int);
+	error = goodix_irq_direction_input(ts);
 	if (error)
 		return error;
 
@@ -536,7 +715,7 @@ static int goodix_reset(struct goodix_ts_data *ts)
 	msleep(20);				/* T2: > 10ms */
 
 	/* HIGH: 0x28/0x29, LOW: 0xBA/0xBB */
-	error = gpiod_direction_output(ts->gpiod_int, ts->client->addr == 0x14);
+	error = goodix_irq_direction_output(ts, ts->client->addr == 0x14);
 	if (error)
 		return error;
 
@@ -560,6 +739,124 @@ static int goodix_reset(struct goodix_ts_data *ts)
 	return 0;
 }
 
+#ifdef ACPI_GPIO_SUPPORT
+#include <asm/cpu_device_id.h>
+#include <asm/intel-family.h>
+
+static const struct x86_cpu_id baytrail_cpu_ids[] = {
+	{ X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_SILVERMONT, X86_FEATURE_ANY, },
+	{}
+};
+
+static inline bool is_byt(void)
+{
+	const struct x86_cpu_id *id = x86_match_cpu(baytrail_cpu_ids);
+
+	return !!id;
+}
+
+static const struct acpi_gpio_params first_gpio = { 0, 0, false };
+static const struct acpi_gpio_params second_gpio = { 1, 0, false };
+
+static const struct acpi_gpio_mapping acpi_goodix_int_first_gpios[] = {
+	{ GOODIX_GPIO_INT_NAME "-gpios", &first_gpio, 1 },
+	{ GOODIX_GPIO_RST_NAME "-gpios", &second_gpio, 1 },
+	{ },
+};
+
+static const struct acpi_gpio_mapping acpi_goodix_int_last_gpios[] = {
+	{ GOODIX_GPIO_RST_NAME "-gpios", &first_gpio, 1 },
+	{ GOODIX_GPIO_INT_NAME "-gpios", &second_gpio, 1 },
+	{ },
+};
+
+static const struct acpi_gpio_mapping acpi_goodix_reset_only_gpios[] = {
+	{ GOODIX_GPIO_RST_NAME "-gpios", &first_gpio, 1 },
+	{ },
+};
+
+static int goodix_resource(struct acpi_resource *ares, void *data)
+{
+	struct goodix_ts_data *ts = data;
+	struct device *dev = &ts->client->dev;
+	struct acpi_resource_gpio *gpio;
+
+	switch (ares->type) {
+	case ACPI_RESOURCE_TYPE_GPIO:
+		gpio = &ares->data.gpio;
+		if (gpio->connection_type == ACPI_RESOURCE_GPIO_TYPE_INT) {
+			if (ts->gpio_int_idx == -1) {
+				ts->gpio_int_idx = ts->gpio_count;
+			} else {
+				dev_err(dev, "More then one GpioInt resource, ignoring ACPI GPIO resources\n");
+				ts->gpio_int_idx = -2;
+			}
+		}
+		ts->gpio_count++;
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+/*
+ * This function gets called in case we fail to get the irq GPIO directly
+ * because the ACPI tables lack GPIO-name to APCI _CRS index mappings
+ * (no _DSD UUID daffd814-6eba-4d8c-8a91-bc9bbf4aa301 data).
+ * In that case we add our own mapping and then goodix_get_gpio_config()
+ * retries to get the GPIOs based on the added mapping.
+ */
+static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts)
+{
+	const struct acpi_gpio_mapping *gpio_mapping = NULL;
+	struct device *dev = &ts->client->dev;
+	LIST_HEAD(resources);
+	int ret;
+
+	ts->gpio_count = 0;
+	ts->gpio_int_idx = -1;
+	ret = acpi_dev_get_resources(ACPI_COMPANION(dev), &resources,
+				     goodix_resource, ts);
+	if (ret < 0) {
+		dev_err(dev, "Error getting ACPI resources: %d\n", ret);
+		return ret;
+	}
+
+	acpi_dev_free_resource_list(&resources);
+
+	if (ts->gpio_count == 2 && ts->gpio_int_idx == 0) {
+		ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_GPIO;
+		gpio_mapping = acpi_goodix_int_first_gpios;
+	} else if (ts->gpio_count == 2 && ts->gpio_int_idx == 1) {
+		ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_GPIO;
+		gpio_mapping = acpi_goodix_int_last_gpios;
+	} else if (ts->gpio_count == 1 && ts->gpio_int_idx == -1 &&
+		   acpi_has_method(ACPI_HANDLE(dev), "INTI") &&
+		   acpi_has_method(ACPI_HANDLE(dev), "INTO")) {
+		dev_info(dev, "Using ACPI INTI and INTO methods for IRQ pin access\n");
+		ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_METHOD;
+		gpio_mapping = acpi_goodix_reset_only_gpios;
+	} else if (is_byt() && ts->gpio_count == 2 && ts->gpio_int_idx == -1) {
+		dev_info(dev, "No ACPI GpioInt resource, assuming that the GPIO order is reset, int\n");
+		ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_GPIO;
+		gpio_mapping = acpi_goodix_int_last_gpios;
+	} else {
+		dev_warn(dev, "Unexpected ACPI resources: gpio_count %d, gpio_int_idx %d\n",
+			 ts->gpio_count, ts->gpio_int_idx);
+		return -EINVAL;
+	}
+
+	return devm_acpi_dev_add_driver_gpios(dev, gpio_mapping);
+}
+#else
+static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts)
+{
+	return -EINVAL;
+}
+#endif /* CONFIG_X86 && CONFIG_ACPI */
+
 /**
  * goodix_get_gpio_config - Get GPIO config from ACPI/DT
  *
@@ -570,6 +867,7 @@ static int goodix_get_gpio_config(struct goodix_ts_data *ts)
 	int error;
 	struct device *dev;
 	struct gpio_desc *gpiod;
+	bool added_acpi_mappings = false;
 
 	if (!ts->client)
 		return -EINVAL;
@@ -593,6 +891,7 @@ static int goodix_get_gpio_config(struct goodix_ts_data *ts)
 		return error;
 	}
 
+retry_get_irq_gpio:
 	/* Get the interrupt GPIO pin number */
 	gpiod = devm_gpiod_get_optional(dev, GOODIX_GPIO_INT_NAME, GPIOD_IN);
 	if (IS_ERR(gpiod)) {
@@ -602,6 +901,11 @@ static int goodix_get_gpio_config(struct goodix_ts_data *ts)
 				GOODIX_GPIO_INT_NAME, error);
 		return error;
 	}
+	if (!gpiod && has_acpi_companion(dev) && !added_acpi_mappings) {
+		added_acpi_mappings = true;
+		if (goodix_add_acpi_gpio_mappings(ts) == 0)
+			goto retry_get_irq_gpio;
+	}
 
 	ts->gpiod_int = gpiod;
 
@@ -617,6 +921,31 @@ static int goodix_get_gpio_config(struct goodix_ts_data *ts)
 
 	ts->gpiod_rst = gpiod;
 
+	switch (ts->irq_pin_access_method) {
+	case IRQ_PIN_ACCESS_ACPI_GPIO:
+		/*
+		 * We end up here if goodix_add_acpi_gpio_mappings() has
+		 * called devm_acpi_dev_add_driver_gpios() because the ACPI
+		 * tables did not contain name to index mappings.
+		 * Check that we successfully got both GPIOs after we've
+		 * added our own acpi_gpio_mapping and if we did not get both
+		 * GPIOs reset irq_pin_access_method to IRQ_PIN_ACCESS_NONE.
+		 */
+		if (!ts->gpiod_int || !ts->gpiod_rst)
+			ts->irq_pin_access_method = IRQ_PIN_ACCESS_NONE;
+		break;
+	case IRQ_PIN_ACCESS_ACPI_METHOD:
+		if (!ts->gpiod_rst)
+			ts->irq_pin_access_method = IRQ_PIN_ACCESS_NONE;
+		break;
+	default:
+		if (ts->gpiod_int && ts->gpiod_rst) {
+			ts->reset_controller_at_probe = true;
+			ts->load_cfg_from_disk = true;
+			ts->irq_pin_access_method = IRQ_PIN_ACCESS_GPIO;
+		}
+	}
+
 	return 0;
 }
 
@@ -629,12 +958,11 @@ static int goodix_get_gpio_config(struct goodix_ts_data *ts)
  */
 static void goodix_read_config(struct goodix_ts_data *ts)
 {
-	u8 config[GOODIX_CONFIG_MAX_LENGTH];
 	int x_max, y_max;
 	int error;
 
 	error = goodix_i2c_read(ts->client, ts->chip->config_addr,
-				config, ts->chip->config_len);
+				ts->config, ts->chip->config_len);
 	if (error) {
 		dev_warn(&ts->client->dev, "Error reading config: %d\n",
 			 error);
@@ -643,15 +971,17 @@ static void goodix_read_config(struct goodix_ts_data *ts)
 		return;
 	}
 
-	ts->int_trigger_type = config[TRIGGER_LOC] & 0x03;
-	ts->max_touch_num = config[MAX_CONTACTS_LOC] & 0x0f;
+	ts->int_trigger_type = ts->config[TRIGGER_LOC] & 0x03;
+	ts->max_touch_num = ts->config[MAX_CONTACTS_LOC] & 0x0f;
 
-	x_max = get_unaligned_le16(&config[RESOLUTION_LOC]);
-	y_max = get_unaligned_le16(&config[RESOLUTION_LOC + 2]);
+	x_max = get_unaligned_le16(&ts->config[RESOLUTION_LOC]);
+	y_max = get_unaligned_le16(&ts->config[RESOLUTION_LOC + 2]);
 	if (x_max && y_max) {
 		input_abs_set_max(ts->input_dev, ABS_MT_POSITION_X, x_max - 1);
 		input_abs_set_max(ts->input_dev, ABS_MT_POSITION_Y, y_max - 1);
 	}
+
+	ts->chip->calc_config_checksum(ts);
 }
 
 /**
@@ -663,7 +993,7 @@ static int goodix_read_version(struct goodix_ts_data *ts)
 {
 	int error;
 	u8 buf[6];
-	char id_str[5];
+	char id_str[GOODIX_ID_MAX_LEN + 1];
 
 	error = goodix_i2c_read(ts->client, GOODIX_REG_ID, buf, sizeof(buf));
 	if (error) {
@@ -671,14 +1001,13 @@ static int goodix_read_version(struct goodix_ts_data *ts)
 		return error;
 	}
 
-	memcpy(id_str, buf, 4);
-	id_str[4] = 0;
-	if (kstrtou16(id_str, 10, &ts->id))
-		ts->id = 0x1001;
+	memcpy(id_str, buf, GOODIX_ID_MAX_LEN);
+	id_str[GOODIX_ID_MAX_LEN] = 0;
+	strscpy(ts->id, id_str, GOODIX_ID_MAX_LEN + 1);
 
 	ts->version = get_unaligned_le16(&buf[4]);
 
-	dev_info(&ts->client->dev, "ID %d, version: %04x\n", ts->id,
+	dev_info(&ts->client->dev, "ID %s, version: %04x\n", ts->id,
 		 ts->version);
 
 	return 0;
@@ -722,6 +1051,7 @@ static int goodix_i2c_test(struct i2c_client *client)
 static int goodix_configure_dev(struct goodix_ts_data *ts)
 {
 	int error;
+	int i;
 
 	ts->int_trigger_type = GOODIX_INT_TRIGGER;
 	ts->max_touch_num = GOODIX_MAX_CONTACTS;
@@ -736,11 +1066,23 @@ static int goodix_configure_dev(struct goodix_ts_data *ts)
 	ts->input_dev->phys = "input/ts";
 	ts->input_dev->id.bustype = BUS_I2C;
 	ts->input_dev->id.vendor = 0x0416;
-	ts->input_dev->id.product = ts->id;
+	if (kstrtou16(ts->id, 10, &ts->input_dev->id.product))
+		ts->input_dev->id.product = 0x1001;
 	ts->input_dev->id.version = ts->version;
 
+	ts->input_dev->keycode = ts->keymap;
+	ts->input_dev->keycodesize = sizeof(ts->keymap[0]);
+	ts->input_dev->keycodemax = GOODIX_MAX_KEYS;
+
 	/* Capacitive Windows/Home button on some devices */
-	input_set_capability(ts->input_dev, EV_KEY, KEY_LEFTMETA);
+	for (i = 0; i < GOODIX_MAX_KEYS; ++i) {
+		if (i == 0)
+			ts->keymap[i] = KEY_LEFTMETA;
+		else
+			ts->keymap[i] = KEY_F1 + (i - 1);
+
+		input_set_capability(ts->input_dev, EV_KEY, ts->keymap[i]);
+	}
 
 	input_set_capability(ts->input_dev, EV_ABS, ABS_MT_POSITION_X);
 	input_set_capability(ts->input_dev, EV_ABS, ABS_MT_POSITION_Y);
@@ -780,6 +1122,12 @@ static int goodix_configure_dev(struct goodix_ts_data *ts)
 			"Non-standard 9-bytes report format quirk\n");
 	}
 
+	if (dmi_check_system(inverted_x_screen)) {
+		ts->prop.invert_x = true;
+		dev_dbg(&ts->client->dev,
+			"Applying 'inverted x screen' quirk\n");
+	}
+
 	error = input_mt_init_slots(ts->input_dev, ts->max_touch_num,
 				    INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
 	if (error) {
@@ -820,7 +1168,7 @@ static void goodix_config_cb(const struct firmware *cfg, void *ctx)
 
 	if (cfg) {
 		/* send device configuration to the firmware */
-		error = goodix_send_cfg(ts, cfg);
+		error = goodix_send_cfg(ts, cfg->data, cfg->size);
 		if (error)
 			goto err_release_cfg;
 	}
@@ -889,7 +1237,8 @@ static int goodix_ts_probe(struct i2c_client *client,
 	if (error)
 		return error;
 
-	if (ts->gpiod_int && ts->gpiod_rst) {
+reset:
+	if (ts->reset_controller_at_probe) {
 		/* reset the controller */
 		error = goodix_reset(ts);
 		if (error) {
@@ -900,6 +1249,12 @@ static int goodix_ts_probe(struct i2c_client *client,
 
 	error = goodix_i2c_test(client);
 	if (error) {
+		if (!ts->reset_controller_at_probe &&
+		    ts->irq_pin_access_method != IRQ_PIN_ACCESS_NONE) {
+			/* Retry after a controller reset */
+			ts->reset_controller_at_probe = true;
+			goto reset;
+		}
 		dev_err(&client->dev, "I2C communication failure: %d\n", error);
 		return error;
 	}
@@ -912,10 +1267,10 @@ static int goodix_ts_probe(struct i2c_client *client,
 
 	ts->chip = goodix_get_chip_data(ts->id);
 
-	if (ts->gpiod_int && ts->gpiod_rst) {
+	if (ts->load_cfg_from_disk) {
 		/* update device config */
 		ts->cfg_name = devm_kasprintf(&client->dev, GFP_KERNEL,
-					      "goodix_%d_cfg.bin", ts->id);
+					      "goodix_%s_cfg.bin", ts->id);
 		if (!ts->cfg_name)
 			return -ENOMEM;
 
@@ -943,7 +1298,7 @@ static int goodix_ts_remove(struct i2c_client *client)
 {
 	struct goodix_ts_data *ts = i2c_get_clientdata(client);
 
-	if (ts->gpiod_int && ts->gpiod_rst)
+	if (ts->load_cfg_from_disk)
 		wait_for_completion(&ts->firmware_loading_complete);
 
 	return 0;
@@ -955,19 +1310,20 @@ static int __maybe_unused goodix_suspend(struct device *dev)
 	struct goodix_ts_data *ts = i2c_get_clientdata(client);
 	int error;
 
+	if (ts->load_cfg_from_disk)
+		wait_for_completion(&ts->firmware_loading_complete);
+
 	/* We need gpio pins to suspend/resume */
-	if (!ts->gpiod_int || !ts->gpiod_rst) {
+	if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_NONE) {
 		disable_irq(client->irq);
 		return 0;
 	}
 
-	wait_for_completion(&ts->firmware_loading_complete);
-
 	/* Free IRQ as IRQ pin is used as output in the suspend sequence */
 	goodix_free_irq(ts);
 
 	/* Output LOW on the INT pin for 5 ms */
-	error = gpiod_direction_output(ts->gpiod_int, 0);
+	error = goodix_irq_direction_output(ts, 0);
 	if (error) {
 		goodix_request_irq(ts);
 		return error;
@@ -979,7 +1335,7 @@ static int __maybe_unused goodix_suspend(struct device *dev)
 				    GOODIX_CMD_SCREEN_OFF);
 	if (error) {
 		dev_err(&ts->client->dev, "Screen off command failed\n");
-		gpiod_direction_input(ts->gpiod_int);
+		goodix_irq_direction_input(ts);
 		goodix_request_irq(ts);
 		return -EAGAIN;
 	}
@@ -997,9 +1353,10 @@ static int __maybe_unused goodix_resume(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct goodix_ts_data *ts = i2c_get_clientdata(client);
+	u8 config_ver;
 	int error;
 
-	if (!ts->gpiod_int || !ts->gpiod_rst) {
+	if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_NONE) {
 		enable_irq(client->irq);
 		return 0;
 	}
@@ -1008,7 +1365,7 @@ static int __maybe_unused goodix_resume(struct device *dev)
 	 * Exit sleep mode by outputting HIGH level to INT pin
 	 * for 2ms~5ms.
 	 */
-	error = gpiod_direction_output(ts->gpiod_int, 1);
+	error = goodix_irq_direction_output(ts, 1);
 	if (error)
 		return error;
 
@@ -1018,6 +1375,27 @@ static int __maybe_unused goodix_resume(struct device *dev)
 	if (error)
 		return error;
 
+	error = goodix_i2c_read(ts->client, ts->chip->config_addr,
+				&config_ver, 1);
+	if (error)
+		dev_warn(dev, "Error reading config version: %d, resetting controller\n",
+			 error);
+	else if (config_ver != ts->config[0])
+		dev_info(dev, "Config version mismatch %d != %d, resetting controller\n",
+			 config_ver, ts->config[0]);
+
+	if (error != 0 || config_ver != ts->config[0]) {
+		error = goodix_reset(ts);
+		if (error) {
+			dev_err(dev, "Controller reset failed.\n");
+			return error;
+		}
+
+		error = goodix_send_cfg(ts, ts->config, ts->chip->config_len);
+		if (error)
+			return error;
+	}
+
 	error = goodix_request_irq(ts);
 	if (error)
 		return error;
@@ -1050,6 +1428,8 @@ static const struct of_device_id goodix_of_match[] = {
 	{ .compatible = "goodix,gt911" },
 	{ .compatible = "goodix,gt9110" },
 	{ .compatible = "goodix,gt912" },
+	{ .compatible = "goodix,gt9147" },
+	{ .compatible = "goodix,gt917s" },
 	{ .compatible = "goodix,gt927" },
 	{ .compatible = "goodix,gt9271" },
 	{ .compatible = "goodix,gt928" },
diff --git a/drivers/input/touchscreen/of_touchscreen.c b/drivers/input/touchscreen/of_touchscreen.c
index e16ec4c..97342e1 100644
--- a/drivers/input/touchscreen/of_touchscreen.c
+++ b/drivers/input/touchscreen/of_touchscreen.c
@@ -66,7 +66,7 @@ void touchscreen_parse_properties(struct input_dev *input, bool multitouch,
 {
 	struct device *dev = input->dev.parent;
 	struct input_absinfo *absinfo;
-	unsigned int axis;
+	unsigned int axis, axis_x, axis_y;
 	unsigned int minimum, maximum, fuzz;
 	bool data_present;
 
@@ -74,33 +74,34 @@ void touchscreen_parse_properties(struct input_dev *input, bool multitouch,
 	if (!input->absinfo)
 		return;
 
-	axis = multitouch ? ABS_MT_POSITION_X : ABS_X;
+	axis_x = multitouch ? ABS_MT_POSITION_X : ABS_X;
+	axis_y = multitouch ? ABS_MT_POSITION_Y : ABS_Y;
+
 	data_present = touchscreen_get_prop_u32(dev, "touchscreen-min-x",
-						input_abs_get_min(input, axis),
+						input_abs_get_min(input, axis_x),
 						&minimum) |
 		       touchscreen_get_prop_u32(dev, "touchscreen-size-x",
 						input_abs_get_max(input,
-								  axis) + 1,
+								  axis_x) + 1,
 						&maximum) |
 		       touchscreen_get_prop_u32(dev, "touchscreen-fuzz-x",
-						input_abs_get_fuzz(input, axis),
+						input_abs_get_fuzz(input, axis_x),
 						&fuzz);
 	if (data_present)
-		touchscreen_set_params(input, axis, minimum, maximum - 1, fuzz);
+		touchscreen_set_params(input, axis_x, minimum, maximum - 1, fuzz);
 
-	axis = multitouch ? ABS_MT_POSITION_Y : ABS_Y;
 	data_present = touchscreen_get_prop_u32(dev, "touchscreen-min-y",
-						input_abs_get_min(input, axis),
+						input_abs_get_min(input, axis_y),
 						&minimum) |
 		       touchscreen_get_prop_u32(dev, "touchscreen-size-y",
 						input_abs_get_max(input,
-								  axis) + 1,
+								  axis_y) + 1,
 						&maximum) |
 		       touchscreen_get_prop_u32(dev, "touchscreen-fuzz-y",
-						input_abs_get_fuzz(input, axis),
+						input_abs_get_fuzz(input, axis_y),
 						&fuzz);
 	if (data_present)
-		touchscreen_set_params(input, axis, minimum, maximum - 1, fuzz);
+		touchscreen_set_params(input, axis_y, minimum, maximum - 1, fuzz);
 
 	axis = multitouch ? ABS_MT_PRESSURE : ABS_PRESSURE;
 	data_present = touchscreen_get_prop_u32(dev,
@@ -117,15 +118,13 @@ void touchscreen_parse_properties(struct input_dev *input, bool multitouch,
 	if (!prop)
 		return;
 
-	axis = multitouch ? ABS_MT_POSITION_X : ABS_X;
-
-	prop->max_x = input_abs_get_max(input, axis);
-	prop->max_y = input_abs_get_max(input, axis + 1);
+	prop->max_x = input_abs_get_max(input, axis_x);
+	prop->max_y = input_abs_get_max(input, axis_y);
 
 	prop->invert_x =
 		device_property_read_bool(dev, "touchscreen-inverted-x");
 	if (prop->invert_x) {
-		absinfo = &input->absinfo[axis];
+		absinfo = &input->absinfo[axis_x];
 		absinfo->maximum -= absinfo->minimum;
 		absinfo->minimum = 0;
 	}
@@ -133,7 +132,7 @@ void touchscreen_parse_properties(struct input_dev *input, bool multitouch,
 	prop->invert_y =
 		device_property_read_bool(dev, "touchscreen-inverted-y");
 	if (prop->invert_y) {
-		absinfo = &input->absinfo[axis + 1];
+		absinfo = &input->absinfo[axis_y];
 		absinfo->maximum -= absinfo->minimum;
 		absinfo->minimum = 0;
 	}
@@ -141,7 +140,7 @@ void touchscreen_parse_properties(struct input_dev *input, bool multitouch,
 	prop->swap_x_y =
 		device_property_read_bool(dev, "touchscreen-swapped-x-y");
 	if (prop->swap_x_y)
-		swap(input->absinfo[axis], input->absinfo[axis + 1]);
+		swap(input->absinfo[axis_x], input->absinfo[axis_y]);
 }
 EXPORT_SYMBOL(touchscreen_parse_properties);
 
diff --git a/drivers/interconnect/qcom/Kconfig b/drivers/interconnect/qcom/Kconfig
index 76938ec..a88f2f0 100644
--- a/drivers/interconnect/qcom/Kconfig
+++ b/drivers/interconnect/qcom/Kconfig
@@ -5,6 +5,9 @@
 	help
 	  Support for Qualcomm's Network-on-Chip interconnect hardware.
 
+config INTERCONNECT_QCOM_BCM_VOTER
+	tristate
+
 config INTERCONNECT_QCOM_MSM8916
 	tristate "Qualcomm MSM8916 interconnect driver"
 	depends on INTERCONNECT_QCOM
@@ -23,6 +26,13 @@
 	 This is a driver for the Qualcomm Network-on-Chip on msm8974-based
 	 platforms.
 
+config INTERCONNECT_QCOM_OSM_L3
+	tristate "Qualcomm OSM L3 interconnect driver"
+	depends on INTERCONNECT_QCOM || COMPILE_TEST
+	help
+	  Say y here to support the Operating State Manager (OSM) interconnect
+	  driver which controls the scaling of L3 caches on Qualcomm SoCs.
+
 config INTERCONNECT_QCOM_QCS404
 	tristate "Qualcomm QCS404 interconnect driver"
 	depends on INTERCONNECT_QCOM
@@ -32,10 +42,25 @@
 	  This is a driver for the Qualcomm Network-on-Chip on qcs404-based
 	  platforms.
 
+config INTERCONNECT_QCOM_RPMH
+	tristate
+
+config INTERCONNECT_QCOM_SC7180
+	tristate "Qualcomm SC7180 interconnect driver"
+	depends on INTERCONNECT_QCOM
+	depends on (QCOM_RPMH && QCOM_COMMAND_DB && OF) || COMPILE_TEST
+	select INTERCONNECT_QCOM_RPMH
+	select INTERCONNECT_QCOM_BCM_VOTER
+	help
+	  This is a driver for the Qualcomm Network-on-Chip on sc7180-based
+	  platforms.
+
 config INTERCONNECT_QCOM_SDM845
 	tristate "Qualcomm SDM845 interconnect driver"
 	depends on INTERCONNECT_QCOM
 	depends on (QCOM_RPMH && QCOM_COMMAND_DB && OF) || COMPILE_TEST
+	select INTERCONNECT_QCOM_RPMH
+	select INTERCONNECT_QCOM_BCM_VOTER
 	help
 	  This is a driver for the Qualcomm Network-on-Chip on sdm845-based
 	  platforms.
diff --git a/drivers/interconnect/qcom/Makefile b/drivers/interconnect/qcom/Makefile
index e827157..3a047fe 100644
--- a/drivers/interconnect/qcom/Makefile
+++ b/drivers/interconnect/qcom/Makefile
@@ -1,13 +1,21 @@
 # SPDX-License-Identifier: GPL-2.0
 
+icc-bcm-voter-objs			:= bcm-voter.o
 qnoc-msm8916-objs			:= msm8916.o
 qnoc-msm8974-objs			:= msm8974.o
+icc-osm-l3-objs				:= osm-l3.o
 qnoc-qcs404-objs			:= qcs404.o
+icc-rpmh-obj				:= icc-rpmh.o
+qnoc-sc7180-objs			:= sc7180.o
 qnoc-sdm845-objs			:= sdm845.o
 icc-smd-rpm-objs			:= smd-rpm.o
 
+obj-$(CONFIG_INTERCONNECT_QCOM_BCM_VOTER) += icc-bcm-voter.o
 obj-$(CONFIG_INTERCONNECT_QCOM_MSM8916) += qnoc-msm8916.o
 obj-$(CONFIG_INTERCONNECT_QCOM_MSM8974) += qnoc-msm8974.o
+obj-$(CONFIG_INTERCONNECT_QCOM_OSM_L3) += icc-osm-l3.o
 obj-$(CONFIG_INTERCONNECT_QCOM_QCS404) += qnoc-qcs404.o
+obj-$(CONFIG_INTERCONNECT_QCOM_RPMH) += icc-rpmh.o
+obj-$(CONFIG_INTERCONNECT_QCOM_SC7180) += qnoc-sc7180.o
 obj-$(CONFIG_INTERCONNECT_QCOM_SDM845) += qnoc-sdm845.o
 obj-$(CONFIG_INTERCONNECT_QCOM_SMD_RPM) += icc-smd-rpm.o
diff --git a/drivers/interconnect/qcom/bcm-voter.c b/drivers/interconnect/qcom/bcm-voter.c
new file mode 100644
index 0000000..2adfde8
--- /dev/null
+++ b/drivers/interconnect/qcom/bcm-voter.c
@@ -0,0 +1,366 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include <asm/div64.h>
+#include <linux/interconnect-provider.h>
+#include <linux/list_sort.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include <soc/qcom/rpmh.h>
+#include <soc/qcom/tcs.h>
+
+#include "bcm-voter.h"
+#include "icc-rpmh.h"
+
+static LIST_HEAD(bcm_voters);
+static DEFINE_MUTEX(bcm_voter_lock);
+
+/**
+ * struct bcm_voter - Bus Clock Manager voter
+ * @dev: reference to the device that communicates with the BCM
+ * @np: reference to the device node to match bcm voters
+ * @lock: mutex to protect commit and wake/sleep lists in the voter
+ * @commit_list: list containing bcms to be committed to hardware
+ * @ws_list: list containing bcms that have different wake/sleep votes
+ * @voter_node: list of bcm voters
+ */
+struct bcm_voter {
+	struct device *dev;
+	struct device_node *np;
+	struct mutex lock;
+	struct list_head commit_list;
+	struct list_head ws_list;
+	struct list_head voter_node;
+};
+
+static int cmp_vcd(void *priv, struct list_head *a, struct list_head *b)
+{
+	const struct qcom_icc_bcm *bcm_a =
+			list_entry(a, struct qcom_icc_bcm, list);
+	const struct qcom_icc_bcm *bcm_b =
+			list_entry(b, struct qcom_icc_bcm, list);
+
+	if (bcm_a->aux_data.vcd < bcm_b->aux_data.vcd)
+		return -1;
+	else if (bcm_a->aux_data.vcd == bcm_b->aux_data.vcd)
+		return 0;
+	else
+		return 1;
+}
+
+static void bcm_aggregate(struct qcom_icc_bcm *bcm)
+{
+	size_t i, bucket;
+	u64 agg_avg[QCOM_ICC_NUM_BUCKETS] = {0};
+	u64 agg_peak[QCOM_ICC_NUM_BUCKETS] = {0};
+	u64 temp;
+
+	for (bucket = 0; bucket < QCOM_ICC_NUM_BUCKETS; bucket++) {
+		for (i = 0; i < bcm->num_nodes; i++) {
+			temp = bcm->nodes[i]->sum_avg[bucket] * bcm->aux_data.width;
+			do_div(temp, bcm->nodes[i]->buswidth * bcm->nodes[i]->channels);
+			agg_avg[bucket] = max(agg_avg[bucket], temp);
+
+			temp = bcm->nodes[i]->max_peak[bucket] * bcm->aux_data.width;
+			do_div(temp, bcm->nodes[i]->buswidth);
+			agg_peak[bucket] = max(agg_peak[bucket], temp);
+		}
+
+		temp = agg_avg[bucket] * 1000ULL;
+		do_div(temp, bcm->aux_data.unit);
+		bcm->vote_x[bucket] = temp;
+
+		temp = agg_peak[bucket] * 1000ULL;
+		do_div(temp, bcm->aux_data.unit);
+		bcm->vote_y[bucket] = temp;
+	}
+
+	if (bcm->keepalive && bcm->vote_x[QCOM_ICC_BUCKET_AMC] == 0 &&
+	    bcm->vote_y[QCOM_ICC_BUCKET_AMC] == 0) {
+		bcm->vote_x[QCOM_ICC_BUCKET_AMC] = 1;
+		bcm->vote_x[QCOM_ICC_BUCKET_WAKE] = 1;
+		bcm->vote_y[QCOM_ICC_BUCKET_AMC] = 1;
+		bcm->vote_y[QCOM_ICC_BUCKET_WAKE] = 1;
+	}
+}
+
+static inline void tcs_cmd_gen(struct tcs_cmd *cmd, u64 vote_x, u64 vote_y,
+			       u32 addr, bool commit)
+{
+	bool valid = true;
+
+	if (!cmd)
+		return;
+
+	if (vote_x == 0 && vote_y == 0)
+		valid = false;
+
+	if (vote_x > BCM_TCS_CMD_VOTE_MASK)
+		vote_x = BCM_TCS_CMD_VOTE_MASK;
+
+	if (vote_y > BCM_TCS_CMD_VOTE_MASK)
+		vote_y = BCM_TCS_CMD_VOTE_MASK;
+
+	cmd->addr = addr;
+	cmd->data = BCM_TCS_CMD(commit, valid, vote_x, vote_y);
+
+	/*
+	 * Set the wait for completion flag on command that need to be completed
+	 * before the next command.
+	 */
+	if (commit)
+		cmd->wait = true;
+}
+
+static void tcs_list_gen(struct list_head *bcm_list, int bucket,
+			 struct tcs_cmd tcs_list[MAX_BCMS],
+			 int n[MAX_VCD + 1])
+{
+	struct qcom_icc_bcm *bcm;
+	bool commit;
+	size_t idx = 0, batch = 0, cur_vcd_size = 0;
+
+	memset(n, 0, sizeof(int) * (MAX_VCD + 1));
+
+	list_for_each_entry(bcm, bcm_list, list) {
+		commit = false;
+		cur_vcd_size++;
+		if ((list_is_last(&bcm->list, bcm_list)) ||
+		    bcm->aux_data.vcd != list_next_entry(bcm, list)->aux_data.vcd) {
+			commit = true;
+			cur_vcd_size = 0;
+		}
+		tcs_cmd_gen(&tcs_list[idx], bcm->vote_x[bucket],
+			    bcm->vote_y[bucket], bcm->addr, commit);
+		idx++;
+		n[batch]++;
+		/*
+		 * Batch the BCMs in such a way that we do not split them in
+		 * multiple payloads when they are under the same VCD. This is
+		 * to ensure that every BCM is committed since we only set the
+		 * commit bit on the last BCM request of every VCD.
+		 */
+		if (n[batch] >= MAX_RPMH_PAYLOAD) {
+			if (!commit) {
+				n[batch] -= cur_vcd_size;
+				n[batch + 1] = cur_vcd_size;
+			}
+			batch++;
+		}
+	}
+}
+
+/**
+ * of_bcm_voter_get - gets a bcm voter handle from DT node
+ * @dev: device pointer for the consumer device
+ * @name: name for the bcm voter device
+ *
+ * This function will match a device_node pointer for the phandle
+ * specified in the device DT and return a bcm_voter handle on success.
+ *
+ * Returns bcm_voter pointer or ERR_PTR() on error. EPROBE_DEFER is returned
+ * when matching bcm voter is yet to be found.
+ */
+struct bcm_voter *of_bcm_voter_get(struct device *dev, const char *name)
+{
+	struct bcm_voter *voter = ERR_PTR(-EPROBE_DEFER);
+	struct bcm_voter *temp;
+	struct device_node *np, *node;
+	int idx = 0;
+
+	if (!dev || !dev->of_node)
+		return ERR_PTR(-ENODEV);
+
+	np = dev->of_node;
+
+	if (name) {
+		idx = of_property_match_string(np, "qcom,bcm-voter-names", name);
+		if (idx < 0)
+			return ERR_PTR(idx);
+	}
+
+	node = of_parse_phandle(np, "qcom,bcm-voters", idx);
+
+	mutex_lock(&bcm_voter_lock);
+	list_for_each_entry(temp, &bcm_voters, voter_node) {
+		if (temp->np == node) {
+			voter = temp;
+			break;
+		}
+	}
+	mutex_unlock(&bcm_voter_lock);
+
+	return voter;
+}
+EXPORT_SYMBOL_GPL(of_bcm_voter_get);
+
+/**
+ * qcom_icc_bcm_voter_add - queues up the bcm nodes that require updates
+ * @voter: voter that the bcms are being added to
+ * @bcm: bcm to add to the commit and wake sleep list
+ */
+void qcom_icc_bcm_voter_add(struct bcm_voter *voter, struct qcom_icc_bcm *bcm)
+{
+	if (!voter)
+		return;
+
+	mutex_lock(&voter->lock);
+	if (list_empty(&bcm->list))
+		list_add_tail(&bcm->list, &voter->commit_list);
+
+	if (list_empty(&bcm->ws_list))
+		list_add_tail(&bcm->ws_list, &voter->ws_list);
+
+	mutex_unlock(&voter->lock);
+}
+EXPORT_SYMBOL_GPL(qcom_icc_bcm_voter_add);
+
+/**
+ * qcom_icc_bcm_voter_commit - generates and commits tcs cmds based on bcms
+ * @voter: voter that needs flushing
+ *
+ * This function generates a set of AMC commands and flushes to the BCM device
+ * associated with the voter. It conditionally generate WAKE and SLEEP commands
+ * based on deltas between WAKE/SLEEP requirements. The ws_list persists
+ * through multiple commit requests and bcm nodes are removed only when the
+ * requirements for WAKE matches SLEEP.
+ *
+ * Returns 0 on success, or an appropriate error code otherwise.
+ */
+int qcom_icc_bcm_voter_commit(struct bcm_voter *voter)
+{
+	struct qcom_icc_bcm *bcm;
+	struct qcom_icc_bcm *bcm_tmp;
+	int commit_idx[MAX_VCD + 1];
+	struct tcs_cmd cmds[MAX_BCMS];
+	int ret = 0;
+
+	if (!voter)
+		return 0;
+
+	mutex_lock(&voter->lock);
+	list_for_each_entry(bcm, &voter->commit_list, list)
+		bcm_aggregate(bcm);
+
+	/*
+	 * Pre sort the BCMs based on VCD for ease of generating a command list
+	 * that groups the BCMs with the same VCD together. VCDs are numbered
+	 * with lowest being the most expensive time wise, ensuring that
+	 * those commands are being sent the earliest in the queue. This needs
+	 * to be sorted every commit since we can't guarantee the order in which
+	 * the BCMs are added to the list.
+	 */
+	list_sort(NULL, &voter->commit_list, cmp_vcd);
+
+	/*
+	 * Construct the command list based on a pre ordered list of BCMs
+	 * based on VCD.
+	 */
+	tcs_list_gen(&voter->commit_list, QCOM_ICC_BUCKET_AMC, cmds, commit_idx);
+
+	if (!commit_idx[0])
+		goto out;
+
+	ret = rpmh_invalidate(voter->dev);
+	if (ret) {
+		pr_err("Error invalidating RPMH client (%d)\n", ret);
+		goto out;
+	}
+
+	ret = rpmh_write_batch(voter->dev, RPMH_ACTIVE_ONLY_STATE,
+			       cmds, commit_idx);
+	if (ret) {
+		pr_err("Error sending AMC RPMH requests (%d)\n", ret);
+		goto out;
+	}
+
+	list_for_each_entry_safe(bcm, bcm_tmp, &voter->commit_list, list)
+		list_del_init(&bcm->list);
+
+	list_for_each_entry_safe(bcm, bcm_tmp, &voter->ws_list, ws_list) {
+		/*
+		 * Only generate WAKE and SLEEP commands if a resource's
+		 * requirements change as the execution environment transitions
+		 * between different power states.
+		 */
+		if (bcm->vote_x[QCOM_ICC_BUCKET_WAKE] !=
+		    bcm->vote_x[QCOM_ICC_BUCKET_SLEEP] ||
+		    bcm->vote_y[QCOM_ICC_BUCKET_WAKE] !=
+		    bcm->vote_y[QCOM_ICC_BUCKET_SLEEP])
+			list_add_tail(&bcm->list, &voter->commit_list);
+		else
+			list_del_init(&bcm->ws_list);
+	}
+
+	if (list_empty(&voter->commit_list))
+		goto out;
+
+	list_sort(NULL, &voter->commit_list, cmp_vcd);
+
+	tcs_list_gen(&voter->commit_list, QCOM_ICC_BUCKET_WAKE, cmds, commit_idx);
+
+	ret = rpmh_write_batch(voter->dev, RPMH_WAKE_ONLY_STATE, cmds, commit_idx);
+	if (ret) {
+		pr_err("Error sending WAKE RPMH requests (%d)\n", ret);
+		goto out;
+	}
+
+	tcs_list_gen(&voter->commit_list, QCOM_ICC_BUCKET_SLEEP, cmds, commit_idx);
+
+	ret = rpmh_write_batch(voter->dev, RPMH_SLEEP_STATE, cmds, commit_idx);
+	if (ret) {
+		pr_err("Error sending SLEEP RPMH requests (%d)\n", ret);
+		goto out;
+	}
+
+out:
+	list_for_each_entry_safe(bcm, bcm_tmp, &voter->commit_list, list)
+		list_del_init(&bcm->list);
+
+	mutex_unlock(&voter->lock);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(qcom_icc_bcm_voter_commit);
+
+static int qcom_icc_bcm_voter_probe(struct platform_device *pdev)
+{
+	struct bcm_voter *voter;
+
+	voter = devm_kzalloc(&pdev->dev, sizeof(*voter), GFP_KERNEL);
+	if (!voter)
+		return -ENOMEM;
+
+	voter->dev = &pdev->dev;
+	voter->np = pdev->dev.of_node;
+	mutex_init(&voter->lock);
+	INIT_LIST_HEAD(&voter->commit_list);
+	INIT_LIST_HEAD(&voter->ws_list);
+
+	mutex_lock(&bcm_voter_lock);
+	list_add_tail(&voter->voter_node, &bcm_voters);
+	mutex_unlock(&bcm_voter_lock);
+
+	return 0;
+}
+
+static const struct of_device_id bcm_voter_of_match[] = {
+	{ .compatible = "qcom,bcm-voter" },
+	{ }
+};
+
+static struct platform_driver qcom_icc_bcm_voter_driver = {
+	.probe = qcom_icc_bcm_voter_probe,
+	.driver = {
+		.name		= "bcm_voter",
+		.of_match_table = bcm_voter_of_match,
+	},
+};
+module_platform_driver(qcom_icc_bcm_voter_driver);
+
+MODULE_AUTHOR("David Dai <daidavid1@codeaurora.org>");
+MODULE_DESCRIPTION("Qualcomm BCM Voter interconnect driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/interconnect/qcom/bcm-voter.h b/drivers/interconnect/qcom/bcm-voter.h
new file mode 100644
index 0000000..0f64c0b
--- /dev/null
+++ b/drivers/interconnect/qcom/bcm-voter.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef __DRIVERS_INTERCONNECT_QCOM_BCM_VOTER_H__
+#define __DRIVERS_INTERCONNECT_QCOM_BCM_VOTER_H__
+
+#include <soc/qcom/cmd-db.h>
+#include <soc/qcom/rpmh.h>
+#include <soc/qcom/tcs.h>
+
+#include "icc-rpmh.h"
+
+#define DEFINE_QBCM(_name, _bcmname, _keepalive, ...)			       \
+static struct qcom_icc_bcm _name = {					       \
+	.name = _bcmname,						       \
+	.keepalive = _keepalive,					       \
+	.num_nodes = ARRAY_SIZE(((struct qcom_icc_node *[]){ __VA_ARGS__ })),  \
+	.nodes = { __VA_ARGS__ },					       \
+}
+
+struct bcm_voter *of_bcm_voter_get(struct device *dev, const char *name);
+void qcom_icc_bcm_voter_add(struct bcm_voter *voter, struct qcom_icc_bcm *bcm);
+int qcom_icc_bcm_voter_commit(struct bcm_voter *voter);
+
+#endif
diff --git a/drivers/interconnect/qcom/icc-rpmh.c b/drivers/interconnect/qcom/icc-rpmh.c
new file mode 100644
index 0000000..3ac5182
--- /dev/null
+++ b/drivers/interconnect/qcom/icc-rpmh.c
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/interconnect.h>
+#include <linux/interconnect-provider.h>
+#include <linux/module.h>
+
+#include "bcm-voter.h"
+#include "icc-rpmh.h"
+
+/**
+ * qcom_icc_pre_aggregate - cleans up stale values from prior icc_set
+ * @node: icc node to operate on
+ */
+void qcom_icc_pre_aggregate(struct icc_node *node)
+{
+	size_t i;
+	struct qcom_icc_node *qn;
+
+	qn = node->data;
+
+	for (i = 0; i < QCOM_ICC_NUM_BUCKETS; i++) {
+		qn->sum_avg[i] = 0;
+		qn->max_peak[i] = 0;
+	}
+}
+EXPORT_SYMBOL_GPL(qcom_icc_pre_aggregate);
+
+/**
+ * qcom_icc_aggregate - aggregate bw for buckets indicated by tag
+ * @node: node to aggregate
+ * @tag: tag to indicate which buckets to aggregate
+ * @avg_bw: new bw to sum aggregate
+ * @peak_bw: new bw to max aggregate
+ * @agg_avg: existing aggregate avg bw val
+ * @agg_peak: existing aggregate peak bw val
+ */
+int qcom_icc_aggregate(struct icc_node *node, u32 tag, u32 avg_bw,
+		       u32 peak_bw, u32 *agg_avg, u32 *agg_peak)
+{
+	size_t i;
+	struct qcom_icc_node *qn;
+	struct qcom_icc_provider *qp;
+
+	qn = node->data;
+	qp = to_qcom_provider(node->provider);
+
+	if (!tag)
+		tag = QCOM_ICC_TAG_ALWAYS;
+
+	for (i = 0; i < QCOM_ICC_NUM_BUCKETS; i++) {
+		if (tag & BIT(i)) {
+			qn->sum_avg[i] += avg_bw;
+			qn->max_peak[i] = max_t(u32, qn->max_peak[i], peak_bw);
+		}
+	}
+
+	*agg_avg += avg_bw;
+	*agg_peak = max_t(u32, *agg_peak, peak_bw);
+
+	for (i = 0; i < qn->num_bcms; i++)
+		qcom_icc_bcm_voter_add(qp->voter, qn->bcms[i]);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(qcom_icc_aggregate);
+
+/**
+ * qcom_icc_set - set the constraints based on path
+ * @src: source node for the path to set constraints on
+ * @dst: destination node for the path to set constraints on
+ *
+ * Return: 0 on success, or an error code otherwise
+ */
+int qcom_icc_set(struct icc_node *src, struct icc_node *dst)
+{
+	struct qcom_icc_provider *qp;
+	struct icc_node *node;
+
+	if (!src)
+		node = dst;
+	else
+		node = src;
+
+	qp = to_qcom_provider(node->provider);
+
+	qcom_icc_bcm_voter_commit(qp->voter);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(qcom_icc_set);
+
+/**
+ * qcom_icc_bcm_init - populates bcm aux data and connect qnodes
+ * @bcm: bcm to be initialized
+ * @dev: associated provider device
+ *
+ * Return: 0 on success, or an error code otherwise
+ */
+int qcom_icc_bcm_init(struct qcom_icc_bcm *bcm, struct device *dev)
+{
+	struct qcom_icc_node *qn;
+	const struct bcm_db *data;
+	size_t data_count;
+	int i;
+
+	/* BCM is already initialised*/
+	if (bcm->addr)
+		return 0;
+
+	bcm->addr = cmd_db_read_addr(bcm->name);
+	if (!bcm->addr) {
+		dev_err(dev, "%s could not find RPMh address\n",
+			bcm->name);
+		return -EINVAL;
+	}
+
+	data = cmd_db_read_aux_data(bcm->name, &data_count);
+	if (IS_ERR(data)) {
+		dev_err(dev, "%s command db read error (%ld)\n",
+			bcm->name, PTR_ERR(data));
+		return PTR_ERR(data);
+	}
+	if (!data_count) {
+		dev_err(dev, "%s command db missing or partial aux data\n",
+			bcm->name);
+		return -EINVAL;
+	}
+
+	bcm->aux_data.unit = le32_to_cpu(data->unit);
+	bcm->aux_data.width = le16_to_cpu(data->width);
+	bcm->aux_data.vcd = data->vcd;
+	bcm->aux_data.reserved = data->reserved;
+	INIT_LIST_HEAD(&bcm->list);
+	INIT_LIST_HEAD(&bcm->ws_list);
+
+	/* Link Qnodes to their respective BCMs */
+	for (i = 0; i < bcm->num_nodes; i++) {
+		qn = bcm->nodes[i];
+		qn->bcms[qn->num_bcms] = bcm;
+		qn->num_bcms++;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(qcom_icc_bcm_init);
+
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/interconnect/qcom/icc-rpmh.h b/drivers/interconnect/qcom/icc-rpmh.h
new file mode 100644
index 0000000..903d25e
--- /dev/null
+++ b/drivers/interconnect/qcom/icc-rpmh.h
@@ -0,0 +1,149 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef __DRIVERS_INTERCONNECT_QCOM_ICC_RPMH_H__
+#define __DRIVERS_INTERCONNECT_QCOM_ICC_RPMH_H__
+
+#define to_qcom_provider(_provider) \
+	container_of(_provider, struct qcom_icc_provider, provider)
+
+/**
+ * struct qcom_icc_provider - Qualcomm specific interconnect provider
+ * @provider: generic interconnect provider
+ * @dev: reference to the NoC device
+ * @bcms: list of bcms that maps to the provider
+ * @num_bcms: number of @bcms
+ * @voter: bcm voter targeted by this provider
+ */
+struct qcom_icc_provider {
+	struct icc_provider provider;
+	struct device *dev;
+	struct qcom_icc_bcm **bcms;
+	size_t num_bcms;
+	struct bcm_voter *voter;
+};
+
+/**
+ * struct bcm_db - Auxiliary data pertaining to each Bus Clock Manager (BCM)
+ * @unit: divisor used to convert bytes/sec bw value to an RPMh msg
+ * @width: multiplier used to convert bytes/sec bw value to an RPMh msg
+ * @vcd: virtual clock domain that this bcm belongs to
+ * @reserved: reserved field
+ */
+struct bcm_db {
+	__le32 unit;
+	__le16 width;
+	u8 vcd;
+	u8 reserved;
+};
+
+#define MAX_LINKS		128
+#define MAX_BCMS		64
+#define MAX_BCM_PER_NODE	3
+#define MAX_VCD			10
+
+/*
+ * The AMC bucket denotes constraints that are applied to hardware when
+ * icc_set_bw() completes, whereas the WAKE and SLEEP constraints are applied
+ * when the execution environment transitions between active and low power mode.
+ */
+#define QCOM_ICC_BUCKET_AMC		0
+#define QCOM_ICC_BUCKET_WAKE		1
+#define QCOM_ICC_BUCKET_SLEEP		2
+#define QCOM_ICC_NUM_BUCKETS		3
+#define QCOM_ICC_TAG_AMC		BIT(QCOM_ICC_BUCKET_AMC)
+#define QCOM_ICC_TAG_WAKE		BIT(QCOM_ICC_BUCKET_WAKE)
+#define QCOM_ICC_TAG_SLEEP		BIT(QCOM_ICC_BUCKET_SLEEP)
+#define QCOM_ICC_TAG_ACTIVE_ONLY	(QCOM_ICC_TAG_AMC | QCOM_ICC_TAG_WAKE)
+#define QCOM_ICC_TAG_ALWAYS		(QCOM_ICC_TAG_AMC | QCOM_ICC_TAG_WAKE |\
+					 QCOM_ICC_TAG_SLEEP)
+
+/**
+ * struct qcom_icc_node - Qualcomm specific interconnect nodes
+ * @name: the node name used in debugfs
+ * @links: an array of nodes where we can go next while traversing
+ * @id: a unique node identifier
+ * @num_links: the total number of @links
+ * @channels: num of channels at this node
+ * @buswidth: width of the interconnect between a node and the bus
+ * @sum_avg: current sum aggregate value of all avg bw requests
+ * @max_peak: current max aggregate value of all peak bw requests
+ * @bcms: list of bcms associated with this logical node
+ * @num_bcms: num of @bcms
+ */
+struct qcom_icc_node {
+	const char *name;
+	u16 links[MAX_LINKS];
+	u16 id;
+	u16 num_links;
+	u16 channels;
+	u16 buswidth;
+	u64 sum_avg[QCOM_ICC_NUM_BUCKETS];
+	u64 max_peak[QCOM_ICC_NUM_BUCKETS];
+	struct qcom_icc_bcm *bcms[MAX_BCM_PER_NODE];
+	size_t num_bcms;
+};
+
+/**
+ * struct qcom_icc_bcm - Qualcomm specific hardware accelerator nodes
+ * known as Bus Clock Manager (BCM)
+ * @name: the bcm node name used to fetch BCM data from command db
+ * @type: latency or bandwidth bcm
+ * @addr: address offsets used when voting to RPMH
+ * @vote_x: aggregated threshold values, represents sum_bw when @type is bw bcm
+ * @vote_y: aggregated threshold values, represents peak_bw when @type is bw bcm
+ * @dirty: flag used to indicate whether the bcm needs to be committed
+ * @keepalive: flag used to indicate whether a keepalive is required
+ * @aux_data: auxiliary data used when calculating threshold values and
+ * communicating with RPMh
+ * @list: used to link to other bcms when compiling lists for commit
+ * @ws_list: used to keep track of bcms that may transition between wake/sleep
+ * @num_nodes: total number of @num_nodes
+ * @nodes: list of qcom_icc_nodes that this BCM encapsulates
+ */
+struct qcom_icc_bcm {
+	const char *name;
+	u32 type;
+	u32 addr;
+	u64 vote_x[QCOM_ICC_NUM_BUCKETS];
+	u64 vote_y[QCOM_ICC_NUM_BUCKETS];
+	bool dirty;
+	bool keepalive;
+	struct bcm_db aux_data;
+	struct list_head list;
+	struct list_head ws_list;
+	size_t num_nodes;
+	struct qcom_icc_node *nodes[];
+};
+
+struct qcom_icc_fabric {
+	struct qcom_icc_node **nodes;
+	size_t num_nodes;
+};
+
+struct qcom_icc_desc {
+	struct qcom_icc_node **nodes;
+	size_t num_nodes;
+	struct qcom_icc_bcm **bcms;
+	size_t num_bcms;
+};
+
+#define DEFINE_QNODE(_name, _id, _channels, _buswidth, ...)		\
+		static struct qcom_icc_node _name = {			\
+		.id = _id,						\
+		.name = #_name,						\
+		.channels = _channels,					\
+		.buswidth = _buswidth,					\
+		.num_links = ARRAY_SIZE(((int[]){ __VA_ARGS__ })),	\
+		.links = { __VA_ARGS__ },				\
+	}
+
+int qcom_icc_aggregate(struct icc_node *node, u32 tag, u32 avg_bw,
+		       u32 peak_bw, u32 *agg_avg, u32 *agg_peak);
+int qcom_icc_set(struct icc_node *src, struct icc_node *dst);
+int qcom_icc_bcm_init(struct qcom_icc_bcm *bcm, struct device *dev);
+void qcom_icc_pre_aggregate(struct icc_node *node);
+
+#endif
diff --git a/drivers/interconnect/qcom/osm-l3.c b/drivers/interconnect/qcom/osm-l3.c
new file mode 100644
index 0000000..a03c6d6
--- /dev/null
+++ b/drivers/interconnect/qcom/osm-l3.c
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/interconnect-provider.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
+
+#include "sc7180.h"
+#include "sdm845.h"
+
+#define LUT_MAX_ENTRIES			40U
+#define LUT_SRC				GENMASK(31, 30)
+#define LUT_L_VAL			GENMASK(7, 0)
+#define LUT_ROW_SIZE			32
+#define CLK_HW_DIV			2
+
+/* Register offsets */
+#define REG_ENABLE			0x0
+#define REG_FREQ_LUT			0x110
+#define REG_PERF_STATE			0x920
+
+#define OSM_L3_MAX_LINKS		1
+
+#define to_qcom_provider(_provider) \
+	container_of(_provider, struct qcom_osm_l3_icc_provider, provider)
+
+struct qcom_osm_l3_icc_provider {
+	void __iomem *base;
+	unsigned int max_state;
+	unsigned long lut_tables[LUT_MAX_ENTRIES];
+	struct icc_provider provider;
+};
+
+/**
+ * struct qcom_icc_node - Qualcomm specific interconnect nodes
+ * @name: the node name used in debugfs
+ * @links: an array of nodes where we can go next while traversing
+ * @id: a unique node identifier
+ * @num_links: the total number of @links
+ * @buswidth: width of the interconnect between a node and the bus
+ */
+struct qcom_icc_node {
+	const char *name;
+	u16 links[OSM_L3_MAX_LINKS];
+	u16 id;
+	u16 num_links;
+	u16 buswidth;
+};
+
+struct qcom_icc_desc {
+	struct qcom_icc_node **nodes;
+	size_t num_nodes;
+};
+
+#define DEFINE_QNODE(_name, _id, _buswidth, ...)			\
+		static struct qcom_icc_node _name = {			\
+		.name = #_name,						\
+		.id = _id,						\
+		.buswidth = _buswidth,					\
+		.num_links = ARRAY_SIZE(((int[]){ __VA_ARGS__ })),	\
+		.links = { __VA_ARGS__ },				\
+	}
+
+DEFINE_QNODE(sdm845_osm_apps_l3, SDM845_MASTER_OSM_L3_APPS, 16, SDM845_SLAVE_OSM_L3);
+DEFINE_QNODE(sdm845_osm_l3, SDM845_SLAVE_OSM_L3, 16);
+
+static struct qcom_icc_node *sdm845_osm_l3_nodes[] = {
+	[MASTER_OSM_L3_APPS] = &sdm845_osm_apps_l3,
+	[SLAVE_OSM_L3] = &sdm845_osm_l3,
+};
+
+const static struct qcom_icc_desc sdm845_icc_osm_l3 = {
+	.nodes = sdm845_osm_l3_nodes,
+	.num_nodes = ARRAY_SIZE(sdm845_osm_l3_nodes),
+};
+
+DEFINE_QNODE(sc7180_osm_apps_l3, SC7180_MASTER_OSM_L3_APPS, 16, SC7180_SLAVE_OSM_L3);
+DEFINE_QNODE(sc7180_osm_l3, SC7180_SLAVE_OSM_L3, 16);
+
+static struct qcom_icc_node *sc7180_osm_l3_nodes[] = {
+	[MASTER_OSM_L3_APPS] = &sc7180_osm_apps_l3,
+	[SLAVE_OSM_L3] = &sc7180_osm_l3,
+};
+
+const static struct qcom_icc_desc sc7180_icc_osm_l3 = {
+	.nodes = sc7180_osm_l3_nodes,
+	.num_nodes = ARRAY_SIZE(sc7180_osm_l3_nodes),
+};
+
+static int qcom_icc_set(struct icc_node *src, struct icc_node *dst)
+{
+	struct qcom_osm_l3_icc_provider *qp;
+	struct icc_provider *provider;
+	struct qcom_icc_node *qn;
+	struct icc_node *n;
+	unsigned int index;
+	u32 agg_peak = 0;
+	u32 agg_avg = 0;
+	u64 rate;
+
+	qn = src->data;
+	provider = src->provider;
+	qp = to_qcom_provider(provider);
+
+	list_for_each_entry(n, &provider->nodes, node_list)
+		provider->aggregate(n, 0, n->avg_bw, n->peak_bw,
+				    &agg_avg, &agg_peak);
+
+	rate = max(agg_avg, agg_peak);
+	rate = icc_units_to_bps(rate);
+	do_div(rate, qn->buswidth);
+
+	for (index = 0; index < qp->max_state - 1; index++) {
+		if (qp->lut_tables[index] >= rate)
+			break;
+	}
+
+	writel_relaxed(index, qp->base + REG_PERF_STATE);
+
+	return 0;
+}
+
+static int qcom_osm_l3_remove(struct platform_device *pdev)
+{
+	struct qcom_osm_l3_icc_provider *qp = platform_get_drvdata(pdev);
+
+	icc_nodes_remove(&qp->provider);
+	return icc_provider_del(&qp->provider);
+}
+
+static int qcom_osm_l3_probe(struct platform_device *pdev)
+{
+	u32 info, src, lval, i, prev_freq = 0, freq;
+	static unsigned long hw_rate, xo_rate;
+	struct qcom_osm_l3_icc_provider *qp;
+	const struct qcom_icc_desc *desc;
+	struct icc_onecell_data *data;
+	struct icc_provider *provider;
+	struct qcom_icc_node **qnodes;
+	struct icc_node *node;
+	size_t num_nodes;
+	struct clk *clk;
+	int ret;
+
+	clk = clk_get(&pdev->dev, "xo");
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	xo_rate = clk_get_rate(clk);
+	clk_put(clk);
+
+	clk = clk_get(&pdev->dev, "alternate");
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	hw_rate = clk_get_rate(clk) / CLK_HW_DIV;
+	clk_put(clk);
+
+	qp = devm_kzalloc(&pdev->dev, sizeof(*qp), GFP_KERNEL);
+	if (!qp)
+		return -ENOMEM;
+
+	qp->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(qp->base))
+		return PTR_ERR(qp->base);
+
+	/* HW should be in enabled state to proceed */
+	if (!(readl_relaxed(qp->base + REG_ENABLE) & 0x1)) {
+		dev_err(&pdev->dev, "error hardware not enabled\n");
+		return -ENODEV;
+	}
+
+	for (i = 0; i < LUT_MAX_ENTRIES; i++) {
+		info = readl_relaxed(qp->base + REG_FREQ_LUT +
+				     i * LUT_ROW_SIZE);
+		src = FIELD_GET(LUT_SRC, info);
+		lval = FIELD_GET(LUT_L_VAL, info);
+		if (src)
+			freq = xo_rate * lval;
+		else
+			freq = hw_rate;
+
+		/* Two of the same frequencies signify end of table */
+		if (i > 0 && prev_freq == freq)
+			break;
+
+		dev_dbg(&pdev->dev, "index=%d freq=%d\n", i, freq);
+
+		qp->lut_tables[i] = freq;
+		prev_freq = freq;
+	}
+	qp->max_state = i;
+
+	desc = device_get_match_data(&pdev->dev);
+	if (!desc)
+		return -EINVAL;
+
+	qnodes = desc->nodes;
+	num_nodes = desc->num_nodes;
+
+	data = devm_kcalloc(&pdev->dev, num_nodes, sizeof(*node), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	provider = &qp->provider;
+	provider->dev = &pdev->dev;
+	provider->set = qcom_icc_set;
+	provider->aggregate = icc_std_aggregate;
+	provider->xlate = of_icc_xlate_onecell;
+	INIT_LIST_HEAD(&provider->nodes);
+	provider->data = data;
+
+	ret = icc_provider_add(provider);
+	if (ret) {
+		dev_err(&pdev->dev, "error adding interconnect provider\n");
+		return ret;
+	}
+
+	for (i = 0; i < num_nodes; i++) {
+		size_t j;
+
+		node = icc_node_create(qnodes[i]->id);
+		if (IS_ERR(node)) {
+			ret = PTR_ERR(node);
+			goto err;
+		}
+
+		node->name = qnodes[i]->name;
+		node->data = qnodes[i];
+		icc_node_add(node, provider);
+
+		for (j = 0; j < qnodes[i]->num_links; j++)
+			icc_link_create(node, qnodes[i]->links[j]);
+
+		data->nodes[i] = node;
+	}
+	data->num_nodes = num_nodes;
+
+	platform_set_drvdata(pdev, qp);
+
+	return 0;
+err:
+	icc_nodes_remove(provider);
+	icc_provider_del(provider);
+
+	return ret;
+}
+
+static const struct of_device_id osm_l3_of_match[] = {
+	{ .compatible = "qcom,sc7180-osm-l3", .data = &sc7180_icc_osm_l3 },
+	{ .compatible = "qcom,sdm845-osm-l3", .data = &sdm845_icc_osm_l3 },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, osm_l3_of_match);
+
+static struct platform_driver osm_l3_driver = {
+	.probe = qcom_osm_l3_probe,
+	.remove = qcom_osm_l3_remove,
+	.driver = {
+		.name = "osm-l3",
+		.of_match_table = osm_l3_of_match,
+	},
+};
+module_platform_driver(osm_l3_driver);
+
+MODULE_DESCRIPTION("Qualcomm OSM L3 interconnect driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/interconnect/qcom/sc7180.c b/drivers/interconnect/qcom/sc7180.c
new file mode 100644
index 0000000..dcf493d
--- /dev/null
+++ b/drivers/interconnect/qcom/sc7180.c
@@ -0,0 +1,641 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/interconnect.h>
+#include <linux/interconnect-provider.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <dt-bindings/interconnect/qcom,sc7180.h>
+
+#include "bcm-voter.h"
+#include "icc-rpmh.h"
+#include "sc7180.h"
+
+DEFINE_QNODE(qhm_a1noc_cfg, SC7180_MASTER_A1NOC_CFG, 1, 4, SC7180_SLAVE_SERVICE_A1NOC);
+DEFINE_QNODE(qhm_qspi, SC7180_MASTER_QSPI, 1, 4, SC7180_SLAVE_A1NOC_SNOC);
+DEFINE_QNODE(qhm_qup_0, SC7180_MASTER_QUP_0, 1, 4, SC7180_SLAVE_A1NOC_SNOC);
+DEFINE_QNODE(xm_sdc2, SC7180_MASTER_SDCC_2, 1, 8, SC7180_SLAVE_A1NOC_SNOC);
+DEFINE_QNODE(xm_emmc, SC7180_MASTER_EMMC, 1, 8, SC7180_SLAVE_A1NOC_SNOC);
+DEFINE_QNODE(xm_ufs_mem, SC7180_MASTER_UFS_MEM, 1, 8, SC7180_SLAVE_A1NOC_SNOC);
+DEFINE_QNODE(qhm_a2noc_cfg, SC7180_MASTER_A2NOC_CFG, 1, 4, SC7180_SLAVE_SERVICE_A2NOC);
+DEFINE_QNODE(qhm_qdss_bam, SC7180_MASTER_QDSS_BAM, 1, 4, SC7180_SLAVE_A2NOC_SNOC);
+DEFINE_QNODE(qhm_qup_1, SC7180_MASTER_QUP_1, 1, 4, SC7180_SLAVE_A2NOC_SNOC);
+DEFINE_QNODE(qxm_crypto, SC7180_MASTER_CRYPTO, 1, 8, SC7180_SLAVE_A2NOC_SNOC);
+DEFINE_QNODE(qxm_ipa, SC7180_MASTER_IPA, 1, 8, SC7180_SLAVE_A2NOC_SNOC);
+DEFINE_QNODE(xm_qdss_etr, SC7180_MASTER_QDSS_ETR, 1, 8, SC7180_SLAVE_A2NOC_SNOC);
+DEFINE_QNODE(qhm_usb3, SC7180_MASTER_USB3, 1, 8, SC7180_SLAVE_A2NOC_SNOC);
+DEFINE_QNODE(qxm_camnoc_hf0_uncomp, SC7180_MASTER_CAMNOC_HF0_UNCOMP, 1, 32, SC7180_SLAVE_CAMNOC_UNCOMP);
+DEFINE_QNODE(qxm_camnoc_hf1_uncomp, SC7180_MASTER_CAMNOC_HF1_UNCOMP, 1, 32, SC7180_SLAVE_CAMNOC_UNCOMP);
+DEFINE_QNODE(qxm_camnoc_sf_uncomp, SC7180_MASTER_CAMNOC_SF_UNCOMP, 1, 32, SC7180_SLAVE_CAMNOC_UNCOMP);
+DEFINE_QNODE(qnm_npu, SC7180_MASTER_NPU, 2, 32, SC7180_SLAVE_CDSP_GEM_NOC);
+DEFINE_QNODE(qxm_npu_dsp, SC7180_MASTER_NPU_PROC, 1, 8, SC7180_SLAVE_CDSP_GEM_NOC);
+DEFINE_QNODE(qnm_snoc, SC7180_MASTER_SNOC_CNOC, 1, 8, SC7180_SLAVE_A1NOC_CFG, SC7180_SLAVE_A2NOC_CFG, SC7180_SLAVE_AHB2PHY_SOUTH, SC7180_SLAVE_AHB2PHY_CENTER, SC7180_SLAVE_AOP, SC7180_SLAVE_AOSS, SC7180_SLAVE_BOOT_ROM, SC7180_SLAVE_CAMERA_CFG, SC7180_SLAVE_CAMERA_NRT_THROTTLE_CFG, SC7180_SLAVE_CAMERA_RT_THROTTLE_CFG, SC7180_SLAVE_CLK_CTL, SC7180_SLAVE_RBCPR_CX_CFG, SC7180_SLAVE_RBCPR_MX_CFG, SC7180_SLAVE_CRYPTO_0_CFG, SC7180_SLAVE_DCC_CFG, SC7180_SLAVE_CNOC_DDRSS, SC7180_SLAVE_DISPLAY_CFG, SC7180_SLAVE_DISPLAY_RT_THROTTLE_CFG, SC7180_SLAVE_DISPLAY_THROTTLE_CFG, SC7180_SLAVE_EMMC_CFG, SC7180_SLAVE_GLM,
+		SC7180_SLAVE_GFX3D_CFG, SC7180_SLAVE_IMEM_CFG, SC7180_SLAVE_IPA_CFG, SC7180_SLAVE_CNOC_MNOC_CFG, SC7180_SLAVE_CNOC_MSS, SC7180_SLAVE_NPU_CFG, SC7180_SLAVE_NPU_DMA_BWMON_CFG, SC7180_SLAVE_NPU_PROC_BWMON_CFG, SC7180_SLAVE_PDM, SC7180_SLAVE_PIMEM_CFG, SC7180_SLAVE_PRNG, SC7180_SLAVE_QDSS_CFG, SC7180_SLAVE_QM_CFG, SC7180_SLAVE_QM_MPU_CFG, SC7180_SLAVE_QSPI_0, SC7180_SLAVE_QUP_0, SC7180_SLAVE_QUP_1, SC7180_SLAVE_SDCC_2, SC7180_SLAVE_SECURITY, SC7180_SLAVE_SNOC_CFG, SC7180_SLAVE_TCSR, SC7180_SLAVE_TLMM_WEST, SC7180_SLAVE_TLMM_NORTH, SC7180_SLAVE_TLMM_SOUTH, SC7180_SLAVE_UFS_MEM_CFG, SC7180_SLAVE_USB3, SC7180_SLAVE_VENUS_CFG, SC7180_SLAVE_VENUS_THROTTLE_CFG, SC7180_SLAVE_VSENSE_CTRL_CFG, SC7180_SLAVE_SERVICE_CNOC);
+DEFINE_QNODE(xm_qdss_dap, SC7180_MASTER_QDSS_DAP, 1, 8, SC7180_SLAVE_A1NOC_CFG, SC7180_SLAVE_A2NOC_CFG, SC7180_SLAVE_AHB2PHY_SOUTH, SC7180_SLAVE_AHB2PHY_CENTER, SC7180_SLAVE_AOP, SC7180_SLAVE_AOSS, SC7180_SLAVE_BOOT_ROM, SC7180_SLAVE_CAMERA_CFG, SC7180_SLAVE_CAMERA_NRT_THROTTLE_CFG, SC7180_SLAVE_CAMERA_RT_THROTTLE_CFG, SC7180_SLAVE_CLK_CTL, SC7180_SLAVE_RBCPR_CX_CFG, SC7180_SLAVE_RBCPR_MX_CFG, SC7180_SLAVE_CRYPTO_0_CFG, SC7180_SLAVE_DCC_CFG, SC7180_SLAVE_CNOC_DDRSS, SC7180_SLAVE_DISPLAY_CFG, SC7180_SLAVE_DISPLAY_RT_THROTTLE_CFG, SC7180_SLAVE_DISPLAY_THROTTLE_CFG, SC7180_SLAVE_EMMC_CFG, SC7180_SLAVE_GLM, SC7180_SLAVE_GFX3D_CFG, SC7180_SLAVE_IMEM_CFG, SC7180_SLAVE_IPA_CFG, SC7180_SLAVE_CNOC_MNOC_CFG, SC7180_SLAVE_CNOC_MSS, SC7180_SLAVE_NPU_CFG, SC7180_SLAVE_NPU_DMA_BWMON_CFG,
+SC7180_SLAVE_NPU_PROC_BWMON_CFG, SC7180_SLAVE_PDM, SC7180_SLAVE_PIMEM_CFG, SC7180_SLAVE_PRNG, SC7180_SLAVE_QDSS_CFG, SC7180_SLAVE_QM_CFG, SC7180_SLAVE_QM_MPU_CFG, SC7180_SLAVE_QSPI_0, SC7180_SLAVE_QUP_0, SC7180_SLAVE_QUP_1, SC7180_SLAVE_SDCC_2, SC7180_SLAVE_SECURITY, SC7180_SLAVE_SNOC_CFG, SC7180_SLAVE_TCSR, SC7180_SLAVE_TLMM_WEST, SC7180_SLAVE_TLMM_NORTH, SC7180_SLAVE_TLMM_SOUTH, SC7180_SLAVE_UFS_MEM_CFG, SC7180_SLAVE_USB3, SC7180_SLAVE_VENUS_CFG, SC7180_SLAVE_VENUS_THROTTLE_CFG, SC7180_SLAVE_VSENSE_CTRL_CFG, SC7180_SLAVE_SERVICE_CNOC);
+DEFINE_QNODE(qhm_cnoc_dc_noc, SC7180_MASTER_CNOC_DC_NOC, 1, 4, SC7180_SLAVE_GEM_NOC_CFG, SC7180_SLAVE_LLCC_CFG);
+DEFINE_QNODE(acm_apps0, SC7180_MASTER_APPSS_PROC, 1, 16, SC7180_SLAVE_GEM_NOC_SNOC, SC7180_SLAVE_LLCC);
+DEFINE_QNODE(acm_sys_tcu, SC7180_MASTER_SYS_TCU, 1, 8, SC7180_SLAVE_GEM_NOC_SNOC, SC7180_SLAVE_LLCC);
+DEFINE_QNODE(qhm_gemnoc_cfg, SC7180_MASTER_GEM_NOC_CFG, 1, 4, SC7180_SLAVE_MSS_PROC_MS_MPU_CFG, SC7180_SLAVE_SERVICE_GEM_NOC);
+DEFINE_QNODE(qnm_cmpnoc, SC7180_MASTER_COMPUTE_NOC, 1, 32, SC7180_SLAVE_GEM_NOC_SNOC, SC7180_SLAVE_LLCC);
+DEFINE_QNODE(qnm_mnoc_hf, SC7180_MASTER_MNOC_HF_MEM_NOC, 1, 32, SC7180_SLAVE_LLCC);
+DEFINE_QNODE(qnm_mnoc_sf, SC7180_MASTER_MNOC_SF_MEM_NOC, 1, 32, SC7180_SLAVE_GEM_NOC_SNOC, SC7180_SLAVE_LLCC);
+DEFINE_QNODE(qnm_snoc_gc, SC7180_MASTER_SNOC_GC_MEM_NOC, 1, 8, SC7180_SLAVE_LLCC);
+DEFINE_QNODE(qnm_snoc_sf, SC7180_MASTER_SNOC_SF_MEM_NOC, 1, 16, SC7180_SLAVE_LLCC);
+DEFINE_QNODE(qxm_gpu, SC7180_MASTER_GFX3D, 2, 32, SC7180_SLAVE_GEM_NOC_SNOC, SC7180_SLAVE_LLCC);
+DEFINE_QNODE(ipa_core_master, SC7180_MASTER_IPA_CORE, 1, 8, SC7180_SLAVE_IPA_CORE);
+DEFINE_QNODE(llcc_mc, SC7180_MASTER_LLCC, 2, 4, SC7180_SLAVE_EBI1);
+DEFINE_QNODE(qhm_mnoc_cfg, SC7180_MASTER_CNOC_MNOC_CFG, 1, 4, SC7180_SLAVE_SERVICE_MNOC);
+DEFINE_QNODE(qxm_camnoc_hf0, SC7180_MASTER_CAMNOC_HF0, 2, 32, SC7180_SLAVE_MNOC_HF_MEM_NOC);
+DEFINE_QNODE(qxm_camnoc_hf1, SC7180_MASTER_CAMNOC_HF1, 2, 32, SC7180_SLAVE_MNOC_HF_MEM_NOC);
+DEFINE_QNODE(qxm_camnoc_sf, SC7180_MASTER_CAMNOC_SF, 1, 32, SC7180_SLAVE_MNOC_SF_MEM_NOC);
+DEFINE_QNODE(qxm_mdp0, SC7180_MASTER_MDP0, 1, 32, SC7180_SLAVE_MNOC_HF_MEM_NOC);
+DEFINE_QNODE(qxm_rot, SC7180_MASTER_ROTATOR, 1, 16, SC7180_SLAVE_MNOC_SF_MEM_NOC);
+DEFINE_QNODE(qxm_venus0, SC7180_MASTER_VIDEO_P0, 1, 32, SC7180_SLAVE_MNOC_SF_MEM_NOC);
+DEFINE_QNODE(qxm_venus_arm9, SC7180_MASTER_VIDEO_PROC, 1, 8, SC7180_SLAVE_MNOC_SF_MEM_NOC);
+DEFINE_QNODE(amm_npu_sys, SC7180_MASTER_NPU_SYS, 2, 32, SC7180_SLAVE_NPU_COMPUTE_NOC);
+DEFINE_QNODE(qhm_npu_cfg, SC7180_MASTER_NPU_NOC_CFG, 1, 4, SC7180_SLAVE_NPU_CAL_DP0, SC7180_SLAVE_NPU_CP, SC7180_SLAVE_NPU_INT_DMA_BWMON_CFG, SC7180_SLAVE_NPU_DPM, SC7180_SLAVE_ISENSE_CFG, SC7180_SLAVE_NPU_LLM_CFG, SC7180_SLAVE_NPU_TCM, SC7180_SLAVE_SERVICE_NPU_NOC);
+DEFINE_QNODE(qup_core_master_1, SC7180_MASTER_QUP_CORE_0, 1, 4, SC7180_SLAVE_QUP_CORE_0);
+DEFINE_QNODE(qup_core_master_2, SC7180_MASTER_QUP_CORE_1, 1, 4, SC7180_SLAVE_QUP_CORE_1);
+DEFINE_QNODE(qhm_snoc_cfg, SC7180_MASTER_SNOC_CFG, 1, 4, SC7180_SLAVE_SERVICE_SNOC);
+DEFINE_QNODE(qnm_aggre1_noc, SC7180_MASTER_A1NOC_SNOC, 1, 16, SC7180_SLAVE_APPSS, SC7180_SLAVE_SNOC_CNOC, SC7180_SLAVE_SNOC_GEM_NOC_SF, SC7180_SLAVE_IMEM, SC7180_SLAVE_PIMEM, SC7180_SLAVE_QDSS_STM);
+DEFINE_QNODE(qnm_aggre2_noc, SC7180_MASTER_A2NOC_SNOC, 1, 16, SC7180_SLAVE_APPSS, SC7180_SLAVE_SNOC_CNOC, SC7180_SLAVE_SNOC_GEM_NOC_SF, SC7180_SLAVE_IMEM, SC7180_SLAVE_PIMEM, SC7180_SLAVE_QDSS_STM, SC7180_SLAVE_TCU);
+DEFINE_QNODE(qnm_gemnoc, SC7180_MASTER_GEM_NOC_SNOC, 1, 8, SC7180_SLAVE_APPSS, SC7180_SLAVE_SNOC_CNOC, SC7180_SLAVE_IMEM, SC7180_SLAVE_PIMEM, SC7180_SLAVE_QDSS_STM, SC7180_SLAVE_TCU);
+DEFINE_QNODE(qxm_pimem, SC7180_MASTER_PIMEM, 1, 8, SC7180_SLAVE_SNOC_GEM_NOC_GC, SC7180_SLAVE_IMEM);
+DEFINE_QNODE(qns_a1noc_snoc, SC7180_SLAVE_A1NOC_SNOC, 1, 16, SC7180_MASTER_A1NOC_SNOC);
+DEFINE_QNODE(srvc_aggre1_noc, SC7180_SLAVE_SERVICE_A1NOC, 1, 4);
+DEFINE_QNODE(qns_a2noc_snoc, SC7180_SLAVE_A2NOC_SNOC, 1, 16, SC7180_MASTER_A2NOC_SNOC);
+DEFINE_QNODE(srvc_aggre2_noc, SC7180_SLAVE_SERVICE_A2NOC, 1, 4);
+DEFINE_QNODE(qns_camnoc_uncomp, SC7180_SLAVE_CAMNOC_UNCOMP, 1, 32);
+DEFINE_QNODE(qns_cdsp_gemnoc, SC7180_SLAVE_CDSP_GEM_NOC, 1, 32, SC7180_MASTER_COMPUTE_NOC);
+DEFINE_QNODE(qhs_a1_noc_cfg, SC7180_SLAVE_A1NOC_CFG, 1, 4, SC7180_MASTER_A1NOC_CFG);
+DEFINE_QNODE(qhs_a2_noc_cfg, SC7180_SLAVE_A2NOC_CFG, 1, 4, SC7180_MASTER_A2NOC_CFG);
+DEFINE_QNODE(qhs_ahb2phy0, SC7180_SLAVE_AHB2PHY_SOUTH, 1, 4);
+DEFINE_QNODE(qhs_ahb2phy2, SC7180_SLAVE_AHB2PHY_CENTER, 1, 4);
+DEFINE_QNODE(qhs_aop, SC7180_SLAVE_AOP, 1, 4);
+DEFINE_QNODE(qhs_aoss, SC7180_SLAVE_AOSS, 1, 4);
+DEFINE_QNODE(qhs_boot_rom, SC7180_SLAVE_BOOT_ROM, 1, 4);
+DEFINE_QNODE(qhs_camera_cfg, SC7180_SLAVE_CAMERA_CFG, 1, 4);
+DEFINE_QNODE(qhs_camera_nrt_throttle_cfg, SC7180_SLAVE_CAMERA_NRT_THROTTLE_CFG, 1, 4);
+DEFINE_QNODE(qhs_camera_rt_throttle_cfg, SC7180_SLAVE_CAMERA_RT_THROTTLE_CFG, 1, 4);
+DEFINE_QNODE(qhs_clk_ctl, SC7180_SLAVE_CLK_CTL, 1, 4);
+DEFINE_QNODE(qhs_cpr_cx, SC7180_SLAVE_RBCPR_CX_CFG, 1, 4);
+DEFINE_QNODE(qhs_cpr_mx, SC7180_SLAVE_RBCPR_MX_CFG, 1, 4);
+DEFINE_QNODE(qhs_crypto0_cfg, SC7180_SLAVE_CRYPTO_0_CFG, 1, 4);
+DEFINE_QNODE(qhs_dcc_cfg, SC7180_SLAVE_DCC_CFG, 1, 4);
+DEFINE_QNODE(qhs_ddrss_cfg, SC7180_SLAVE_CNOC_DDRSS, 1, 4, SC7180_MASTER_CNOC_DC_NOC);
+DEFINE_QNODE(qhs_display_cfg, SC7180_SLAVE_DISPLAY_CFG, 1, 4);
+DEFINE_QNODE(qhs_display_rt_throttle_cfg, SC7180_SLAVE_DISPLAY_RT_THROTTLE_CFG, 1, 4);
+DEFINE_QNODE(qhs_display_throttle_cfg, SC7180_SLAVE_DISPLAY_THROTTLE_CFG, 1, 4);
+DEFINE_QNODE(qhs_emmc_cfg, SC7180_SLAVE_EMMC_CFG, 1, 4);
+DEFINE_QNODE(qhs_glm, SC7180_SLAVE_GLM, 1, 4);
+DEFINE_QNODE(qhs_gpuss_cfg, SC7180_SLAVE_GFX3D_CFG, 1, 8);
+DEFINE_QNODE(qhs_imem_cfg, SC7180_SLAVE_IMEM_CFG, 1, 4);
+DEFINE_QNODE(qhs_ipa, SC7180_SLAVE_IPA_CFG, 1, 4);
+DEFINE_QNODE(qhs_mnoc_cfg, SC7180_SLAVE_CNOC_MNOC_CFG, 1, 4, SC7180_MASTER_CNOC_MNOC_CFG);
+DEFINE_QNODE(qhs_mss_cfg, SC7180_SLAVE_CNOC_MSS, 1, 4);
+DEFINE_QNODE(qhs_npu_cfg, SC7180_SLAVE_NPU_CFG, 1, 4, SC7180_MASTER_NPU_NOC_CFG);
+DEFINE_QNODE(qhs_npu_dma_throttle_cfg, SC7180_SLAVE_NPU_DMA_BWMON_CFG, 1, 4);
+DEFINE_QNODE(qhs_npu_dsp_throttle_cfg, SC7180_SLAVE_NPU_PROC_BWMON_CFG, 1, 4);
+DEFINE_QNODE(qhs_pdm, SC7180_SLAVE_PDM, 1, 4);
+DEFINE_QNODE(qhs_pimem_cfg, SC7180_SLAVE_PIMEM_CFG, 1, 4);
+DEFINE_QNODE(qhs_prng, SC7180_SLAVE_PRNG, 1, 4);
+DEFINE_QNODE(qhs_qdss_cfg, SC7180_SLAVE_QDSS_CFG, 1, 4);
+DEFINE_QNODE(qhs_qm_cfg, SC7180_SLAVE_QM_CFG, 1, 4);
+DEFINE_QNODE(qhs_qm_mpu_cfg, SC7180_SLAVE_QM_MPU_CFG, 1, 4);
+DEFINE_QNODE(qhs_qspi, SC7180_SLAVE_QSPI_0, 1, 4);
+DEFINE_QNODE(qhs_qup0, SC7180_SLAVE_QUP_0, 1, 4);
+DEFINE_QNODE(qhs_qup1, SC7180_SLAVE_QUP_1, 1, 4);
+DEFINE_QNODE(qhs_sdc2, SC7180_SLAVE_SDCC_2, 1, 4);
+DEFINE_QNODE(qhs_security, SC7180_SLAVE_SECURITY, 1, 4);
+DEFINE_QNODE(qhs_snoc_cfg, SC7180_SLAVE_SNOC_CFG, 1, 4, SC7180_MASTER_SNOC_CFG);
+DEFINE_QNODE(qhs_tcsr, SC7180_SLAVE_TCSR, 1, 4);
+DEFINE_QNODE(qhs_tlmm_1, SC7180_SLAVE_TLMM_WEST, 1, 4);
+DEFINE_QNODE(qhs_tlmm_2, SC7180_SLAVE_TLMM_NORTH, 1, 4);
+DEFINE_QNODE(qhs_tlmm_3, SC7180_SLAVE_TLMM_SOUTH, 1, 4);
+DEFINE_QNODE(qhs_ufs_mem_cfg, SC7180_SLAVE_UFS_MEM_CFG, 1, 4);
+DEFINE_QNODE(qhs_usb3, SC7180_SLAVE_USB3, 1, 4);
+DEFINE_QNODE(qhs_venus_cfg, SC7180_SLAVE_VENUS_CFG, 1, 4);
+DEFINE_QNODE(qhs_venus_throttle_cfg, SC7180_SLAVE_VENUS_THROTTLE_CFG, 1, 4);
+DEFINE_QNODE(qhs_vsense_ctrl_cfg, SC7180_SLAVE_VSENSE_CTRL_CFG, 1, 4);
+DEFINE_QNODE(srvc_cnoc, SC7180_SLAVE_SERVICE_CNOC, 1, 4);
+DEFINE_QNODE(qhs_gemnoc, SC7180_SLAVE_GEM_NOC_CFG, 1, 4, SC7180_MASTER_GEM_NOC_CFG);
+DEFINE_QNODE(qhs_llcc, SC7180_SLAVE_LLCC_CFG, 1, 4);
+DEFINE_QNODE(qhs_mdsp_ms_mpu_cfg, SC7180_SLAVE_MSS_PROC_MS_MPU_CFG, 1, 4);
+DEFINE_QNODE(qns_gem_noc_snoc, SC7180_SLAVE_GEM_NOC_SNOC, 1, 8, SC7180_MASTER_GEM_NOC_SNOC);
+DEFINE_QNODE(qns_llcc, SC7180_SLAVE_LLCC, 1, 16, SC7180_MASTER_LLCC);
+DEFINE_QNODE(srvc_gemnoc, SC7180_SLAVE_SERVICE_GEM_NOC, 1, 4);
+DEFINE_QNODE(ipa_core_slave, SC7180_SLAVE_IPA_CORE, 1, 8);
+DEFINE_QNODE(ebi, SC7180_SLAVE_EBI1, 2, 4);
+DEFINE_QNODE(qns_mem_noc_hf, SC7180_SLAVE_MNOC_HF_MEM_NOC, 1, 32, SC7180_MASTER_MNOC_HF_MEM_NOC);
+DEFINE_QNODE(qns_mem_noc_sf, SC7180_SLAVE_MNOC_SF_MEM_NOC, 1, 32, SC7180_MASTER_MNOC_SF_MEM_NOC);
+DEFINE_QNODE(srvc_mnoc, SC7180_SLAVE_SERVICE_MNOC, 1, 4);
+DEFINE_QNODE(qhs_cal_dp0, SC7180_SLAVE_NPU_CAL_DP0, 1, 4);
+DEFINE_QNODE(qhs_cp, SC7180_SLAVE_NPU_CP, 1, 4);
+DEFINE_QNODE(qhs_dma_bwmon, SC7180_SLAVE_NPU_INT_DMA_BWMON_CFG, 1, 4);
+DEFINE_QNODE(qhs_dpm, SC7180_SLAVE_NPU_DPM, 1, 4);
+DEFINE_QNODE(qhs_isense, SC7180_SLAVE_ISENSE_CFG, 1, 4);
+DEFINE_QNODE(qhs_llm, SC7180_SLAVE_NPU_LLM_CFG, 1, 4);
+DEFINE_QNODE(qhs_tcm, SC7180_SLAVE_NPU_TCM, 1, 4);
+DEFINE_QNODE(qns_npu_sys, SC7180_SLAVE_NPU_COMPUTE_NOC, 2, 32);
+DEFINE_QNODE(srvc_noc, SC7180_SLAVE_SERVICE_NPU_NOC, 1, 4);
+DEFINE_QNODE(qup_core_slave_1, SC7180_SLAVE_QUP_CORE_0, 1, 4);
+DEFINE_QNODE(qup_core_slave_2, SC7180_SLAVE_QUP_CORE_1, 1, 4);
+DEFINE_QNODE(qhs_apss, SC7180_SLAVE_APPSS, 1, 8);
+DEFINE_QNODE(qns_cnoc, SC7180_SLAVE_SNOC_CNOC, 1, 8, SC7180_MASTER_SNOC_CNOC);
+DEFINE_QNODE(qns_gemnoc_gc, SC7180_SLAVE_SNOC_GEM_NOC_GC, 1, 8, SC7180_MASTER_SNOC_GC_MEM_NOC);
+DEFINE_QNODE(qns_gemnoc_sf, SC7180_SLAVE_SNOC_GEM_NOC_SF, 1, 16, SC7180_MASTER_SNOC_SF_MEM_NOC);
+DEFINE_QNODE(qxs_imem, SC7180_SLAVE_IMEM, 1, 8);
+DEFINE_QNODE(qxs_pimem, SC7180_SLAVE_PIMEM, 1, 8);
+DEFINE_QNODE(srvc_snoc, SC7180_SLAVE_SERVICE_SNOC, 1, 4);
+DEFINE_QNODE(xs_qdss_stm, SC7180_SLAVE_QDSS_STM, 1, 4);
+DEFINE_QNODE(xs_sys_tcu_cfg, SC7180_SLAVE_TCU, 1, 8);
+
+DEFINE_QBCM(bcm_acv, "ACV", false, &ebi);
+DEFINE_QBCM(bcm_mc0, "MC0", true, &ebi);
+DEFINE_QBCM(bcm_sh0, "SH0", true, &qns_llcc);
+DEFINE_QBCM(bcm_mm0, "MM0", false, &qns_mem_noc_hf);
+DEFINE_QBCM(bcm_ce0, "CE0", false, &qxm_crypto);
+DEFINE_QBCM(bcm_ip0, "IP0", false, &ipa_core_slave);
+DEFINE_QBCM(bcm_cn0, "CN0", true, &qnm_snoc, &xm_qdss_dap, &qhs_a1_noc_cfg, &qhs_a2_noc_cfg, &qhs_ahb2phy0, &qhs_aop, &qhs_aoss, &qhs_boot_rom, &qhs_camera_cfg, &qhs_camera_nrt_throttle_cfg, &qhs_camera_rt_throttle_cfg, &qhs_clk_ctl, &qhs_cpr_cx, &qhs_cpr_mx, &qhs_crypto0_cfg, &qhs_dcc_cfg, &qhs_ddrss_cfg, &qhs_display_cfg, &qhs_display_rt_throttle_cfg, &qhs_display_throttle_cfg, &qhs_glm, &qhs_gpuss_cfg, &qhs_imem_cfg, &qhs_ipa, &qhs_mnoc_cfg, &qhs_mss_cfg, &qhs_npu_cfg, &qhs_npu_dma_throttle_cfg, &qhs_npu_dsp_throttle_cfg, &qhs_pimem_cfg, &qhs_prng, &qhs_qdss_cfg, &qhs_qm_cfg, &qhs_qm_mpu_cfg, &qhs_qup0, &qhs_qup1, &qhs_security, &qhs_snoc_cfg, &qhs_tcsr, &qhs_tlmm_1, &qhs_tlmm_2, &qhs_tlmm_3, &qhs_ufs_mem_cfg, &qhs_usb3, &qhs_venus_cfg, &qhs_venus_throttle_cfg, &qhs_vsense_ctrl_cfg, &srvc_cnoc);
+DEFINE_QBCM(bcm_mm1, "MM1", false, &qxm_camnoc_hf0_uncomp, &qxm_camnoc_hf1_uncomp, &qxm_camnoc_sf_uncomp, &qhm_mnoc_cfg, &qxm_mdp0, &qxm_rot, &qxm_venus0, &qxm_venus_arm9);
+DEFINE_QBCM(bcm_sh2, "SH2", false, &acm_sys_tcu);
+DEFINE_QBCM(bcm_mm2, "MM2", false, &qns_mem_noc_sf);
+DEFINE_QBCM(bcm_qup0, "QUP0", false, &qup_core_master_1, &qup_core_master_2);
+DEFINE_QBCM(bcm_sh3, "SH3", false, &qnm_cmpnoc);
+DEFINE_QBCM(bcm_sh4, "SH4", false, &acm_apps0);
+DEFINE_QBCM(bcm_sn0, "SN0", true, &qns_gemnoc_sf);
+DEFINE_QBCM(bcm_co0, "CO0", false, &qns_cdsp_gemnoc);
+DEFINE_QBCM(bcm_sn1, "SN1", false, &qxs_imem);
+DEFINE_QBCM(bcm_cn1, "CN1", false, &qhm_qspi, &xm_sdc2, &xm_emmc, &qhs_ahb2phy2, &qhs_emmc_cfg, &qhs_pdm, &qhs_qspi, &qhs_sdc2);
+DEFINE_QBCM(bcm_sn2, "SN2", false, &qxm_pimem, &qns_gemnoc_gc);
+DEFINE_QBCM(bcm_co2, "CO2", false, &qnm_npu);
+DEFINE_QBCM(bcm_sn3, "SN3", false, &qxs_pimem);
+DEFINE_QBCM(bcm_co3, "CO3", false, &qxm_npu_dsp);
+DEFINE_QBCM(bcm_sn4, "SN4", false, &xs_qdss_stm);
+DEFINE_QBCM(bcm_sn7, "SN7", false, &qnm_aggre1_noc);
+DEFINE_QBCM(bcm_sn9, "SN9", false, &qnm_aggre2_noc);
+DEFINE_QBCM(bcm_sn12, "SN12", false, &qnm_gemnoc);
+
+static struct qcom_icc_bcm *aggre1_noc_bcms[] = {
+	&bcm_cn1,
+};
+
+static struct qcom_icc_node *aggre1_noc_nodes[] = {
+	[MASTER_A1NOC_CFG] = &qhm_a1noc_cfg,
+	[MASTER_QSPI] = &qhm_qspi,
+	[MASTER_QUP_0] = &qhm_qup_0,
+	[MASTER_SDCC_2] = &xm_sdc2,
+	[MASTER_EMMC] = &xm_emmc,
+	[MASTER_UFS_MEM] = &xm_ufs_mem,
+	[SLAVE_A1NOC_SNOC] = &qns_a1noc_snoc,
+	[SLAVE_SERVICE_A1NOC] = &srvc_aggre1_noc,
+};
+
+static struct qcom_icc_desc sc7180_aggre1_noc = {
+	.nodes = aggre1_noc_nodes,
+	.num_nodes = ARRAY_SIZE(aggre1_noc_nodes),
+	.bcms = aggre1_noc_bcms,
+	.num_bcms = ARRAY_SIZE(aggre1_noc_bcms),
+};
+
+static struct qcom_icc_bcm *aggre2_noc_bcms[] = {
+	&bcm_ce0,
+};
+
+static struct qcom_icc_node *aggre2_noc_nodes[] = {
+	[MASTER_A2NOC_CFG] = &qhm_a2noc_cfg,
+	[MASTER_QDSS_BAM] = &qhm_qdss_bam,
+	[MASTER_QUP_1] = &qhm_qup_1,
+	[MASTER_USB3] = &qhm_usb3,
+	[MASTER_CRYPTO] = &qxm_crypto,
+	[MASTER_IPA] = &qxm_ipa,
+	[MASTER_QDSS_ETR] = &xm_qdss_etr,
+	[SLAVE_A2NOC_SNOC] = &qns_a2noc_snoc,
+	[SLAVE_SERVICE_A2NOC] = &srvc_aggre2_noc,
+};
+
+static struct qcom_icc_desc sc7180_aggre2_noc = {
+	.nodes = aggre2_noc_nodes,
+	.num_nodes = ARRAY_SIZE(aggre2_noc_nodes),
+	.bcms = aggre2_noc_bcms,
+	.num_bcms = ARRAY_SIZE(aggre2_noc_bcms),
+};
+
+static struct qcom_icc_bcm *camnoc_virt_bcms[] = {
+	&bcm_mm1,
+};
+
+static struct qcom_icc_node *camnoc_virt_nodes[] = {
+	[MASTER_CAMNOC_HF0_UNCOMP] = &qxm_camnoc_hf0_uncomp,
+	[MASTER_CAMNOC_HF1_UNCOMP] = &qxm_camnoc_hf1_uncomp,
+	[MASTER_CAMNOC_SF_UNCOMP] = &qxm_camnoc_sf_uncomp,
+	[SLAVE_CAMNOC_UNCOMP] = &qns_camnoc_uncomp,
+};
+
+static struct qcom_icc_desc sc7180_camnoc_virt = {
+	.nodes = camnoc_virt_nodes,
+	.num_nodes = ARRAY_SIZE(camnoc_virt_nodes),
+	.bcms = camnoc_virt_bcms,
+	.num_bcms = ARRAY_SIZE(camnoc_virt_bcms),
+};
+
+static struct qcom_icc_bcm *compute_noc_bcms[] = {
+	&bcm_co0,
+	&bcm_co2,
+	&bcm_co3,
+};
+
+static struct qcom_icc_node *compute_noc_nodes[] = {
+	[MASTER_NPU] = &qnm_npu,
+	[MASTER_NPU_PROC] = &qxm_npu_dsp,
+	[SLAVE_CDSP_GEM_NOC] = &qns_cdsp_gemnoc,
+};
+
+static struct qcom_icc_desc sc7180_compute_noc = {
+	.nodes = compute_noc_nodes,
+	.num_nodes = ARRAY_SIZE(compute_noc_nodes),
+	.bcms = compute_noc_bcms,
+	.num_bcms = ARRAY_SIZE(compute_noc_bcms),
+};
+
+static struct qcom_icc_bcm *config_noc_bcms[] = {
+	&bcm_cn0,
+	&bcm_cn1,
+};
+
+static struct qcom_icc_node *config_noc_nodes[] = {
+	[MASTER_SNOC_CNOC] = &qnm_snoc,
+	[MASTER_QDSS_DAP] = &xm_qdss_dap,
+	[SLAVE_A1NOC_CFG] = &qhs_a1_noc_cfg,
+	[SLAVE_A2NOC_CFG] = &qhs_a2_noc_cfg,
+	[SLAVE_AHB2PHY_SOUTH] = &qhs_ahb2phy0,
+	[SLAVE_AHB2PHY_CENTER] = &qhs_ahb2phy2,
+	[SLAVE_AOP] = &qhs_aop,
+	[SLAVE_AOSS] = &qhs_aoss,
+	[SLAVE_BOOT_ROM] = &qhs_boot_rom,
+	[SLAVE_CAMERA_CFG] = &qhs_camera_cfg,
+	[SLAVE_CAMERA_NRT_THROTTLE_CFG] = &qhs_camera_nrt_throttle_cfg,
+	[SLAVE_CAMERA_RT_THROTTLE_CFG] = &qhs_camera_rt_throttle_cfg,
+	[SLAVE_CLK_CTL] = &qhs_clk_ctl,
+	[SLAVE_RBCPR_CX_CFG] = &qhs_cpr_cx,
+	[SLAVE_RBCPR_MX_CFG] = &qhs_cpr_mx,
+	[SLAVE_CRYPTO_0_CFG] = &qhs_crypto0_cfg,
+	[SLAVE_DCC_CFG] = &qhs_dcc_cfg,
+	[SLAVE_CNOC_DDRSS] = &qhs_ddrss_cfg,
+	[SLAVE_DISPLAY_CFG] = &qhs_display_cfg,
+	[SLAVE_DISPLAY_RT_THROTTLE_CFG] = &qhs_display_rt_throttle_cfg,
+	[SLAVE_DISPLAY_THROTTLE_CFG] = &qhs_display_throttle_cfg,
+	[SLAVE_EMMC_CFG] = &qhs_emmc_cfg,
+	[SLAVE_GLM] = &qhs_glm,
+	[SLAVE_GFX3D_CFG] = &qhs_gpuss_cfg,
+	[SLAVE_IMEM_CFG] = &qhs_imem_cfg,
+	[SLAVE_IPA_CFG] = &qhs_ipa,
+	[SLAVE_CNOC_MNOC_CFG] = &qhs_mnoc_cfg,
+	[SLAVE_CNOC_MSS] = &qhs_mss_cfg,
+	[SLAVE_NPU_CFG] = &qhs_npu_cfg,
+	[SLAVE_NPU_DMA_BWMON_CFG] = &qhs_npu_dma_throttle_cfg,
+	[SLAVE_NPU_PROC_BWMON_CFG] = &qhs_npu_dsp_throttle_cfg,
+	[SLAVE_PDM] = &qhs_pdm,
+	[SLAVE_PIMEM_CFG] = &qhs_pimem_cfg,
+	[SLAVE_PRNG] = &qhs_prng,
+	[SLAVE_QDSS_CFG] = &qhs_qdss_cfg,
+	[SLAVE_QM_CFG] = &qhs_qm_cfg,
+	[SLAVE_QM_MPU_CFG] = &qhs_qm_mpu_cfg,
+	[SLAVE_QSPI_0] = &qhs_qspi,
+	[SLAVE_QUP_0] = &qhs_qup0,
+	[SLAVE_QUP_1] = &qhs_qup1,
+	[SLAVE_SDCC_2] = &qhs_sdc2,
+	[SLAVE_SECURITY] = &qhs_security,
+	[SLAVE_SNOC_CFG] = &qhs_snoc_cfg,
+	[SLAVE_TCSR] = &qhs_tcsr,
+	[SLAVE_TLMM_WEST] = &qhs_tlmm_1,
+	[SLAVE_TLMM_NORTH] = &qhs_tlmm_2,
+	[SLAVE_TLMM_SOUTH] = &qhs_tlmm_3,
+	[SLAVE_UFS_MEM_CFG] = &qhs_ufs_mem_cfg,
+	[SLAVE_USB3] = &qhs_usb3,
+	[SLAVE_VENUS_CFG] = &qhs_venus_cfg,
+	[SLAVE_VENUS_THROTTLE_CFG] = &qhs_venus_throttle_cfg,
+	[SLAVE_VSENSE_CTRL_CFG] = &qhs_vsense_ctrl_cfg,
+	[SLAVE_SERVICE_CNOC] = &srvc_cnoc,
+};
+
+static struct qcom_icc_desc sc7180_config_noc = {
+	.nodes = config_noc_nodes,
+	.num_nodes = ARRAY_SIZE(config_noc_nodes),
+	.bcms = config_noc_bcms,
+	.num_bcms = ARRAY_SIZE(config_noc_bcms),
+};
+
+static struct qcom_icc_node *dc_noc_nodes[] = {
+	[MASTER_CNOC_DC_NOC] = &qhm_cnoc_dc_noc,
+	[SLAVE_GEM_NOC_CFG] = &qhs_gemnoc,
+	[SLAVE_LLCC_CFG] = &qhs_llcc,
+};
+
+static struct qcom_icc_desc sc7180_dc_noc = {
+	.nodes = dc_noc_nodes,
+	.num_nodes = ARRAY_SIZE(dc_noc_nodes),
+};
+
+static struct qcom_icc_bcm *gem_noc_bcms[] = {
+	&bcm_sh0,
+	&bcm_sh2,
+	&bcm_sh3,
+	&bcm_sh4,
+};
+
+static struct qcom_icc_node *gem_noc_nodes[] = {
+	[MASTER_APPSS_PROC] = &acm_apps0,
+	[MASTER_SYS_TCU] = &acm_sys_tcu,
+	[MASTER_GEM_NOC_CFG] = &qhm_gemnoc_cfg,
+	[MASTER_COMPUTE_NOC] = &qnm_cmpnoc,
+	[MASTER_MNOC_HF_MEM_NOC] = &qnm_mnoc_hf,
+	[MASTER_MNOC_SF_MEM_NOC] = &qnm_mnoc_sf,
+	[MASTER_SNOC_GC_MEM_NOC] = &qnm_snoc_gc,
+	[MASTER_SNOC_SF_MEM_NOC] = &qnm_snoc_sf,
+	[MASTER_GFX3D] = &qxm_gpu,
+	[SLAVE_MSS_PROC_MS_MPU_CFG] = &qhs_mdsp_ms_mpu_cfg,
+	[SLAVE_GEM_NOC_SNOC] = &qns_gem_noc_snoc,
+	[SLAVE_LLCC] = &qns_llcc,
+	[SLAVE_SERVICE_GEM_NOC] = &srvc_gemnoc,
+};
+
+static struct qcom_icc_desc sc7180_gem_noc = {
+	.nodes = gem_noc_nodes,
+	.num_nodes = ARRAY_SIZE(gem_noc_nodes),
+	.bcms = gem_noc_bcms,
+	.num_bcms = ARRAY_SIZE(gem_noc_bcms),
+};
+
+static struct qcom_icc_bcm *ipa_virt_bcms[] = {
+	&bcm_ip0,
+};
+
+static struct qcom_icc_node *ipa_virt_nodes[] = {
+	[MASTER_IPA_CORE] = &ipa_core_master,
+	[SLAVE_IPA_CORE] = &ipa_core_slave,
+};
+
+static struct qcom_icc_desc sc7180_ipa_virt = {
+	.nodes = ipa_virt_nodes,
+	.num_nodes = ARRAY_SIZE(ipa_virt_nodes),
+	.bcms = ipa_virt_bcms,
+	.num_bcms = ARRAY_SIZE(ipa_virt_bcms),
+};
+
+static struct qcom_icc_bcm *mc_virt_bcms[] = {
+	&bcm_acv,
+	&bcm_mc0,
+};
+
+static struct qcom_icc_node *mc_virt_nodes[] = {
+	[MASTER_LLCC] = &llcc_mc,
+	[SLAVE_EBI1] = &ebi,
+};
+
+static struct qcom_icc_desc sc7180_mc_virt = {
+	.nodes = mc_virt_nodes,
+	.num_nodes = ARRAY_SIZE(mc_virt_nodes),
+	.bcms = mc_virt_bcms,
+	.num_bcms = ARRAY_SIZE(mc_virt_bcms),
+};
+
+static struct qcom_icc_bcm *mmss_noc_bcms[] = {
+	&bcm_mm0,
+	&bcm_mm1,
+	&bcm_mm2,
+};
+
+static struct qcom_icc_node *mmss_noc_nodes[] = {
+	[MASTER_CNOC_MNOC_CFG] = &qhm_mnoc_cfg,
+	[MASTER_CAMNOC_HF0] = &qxm_camnoc_hf0,
+	[MASTER_CAMNOC_HF1] = &qxm_camnoc_hf1,
+	[MASTER_CAMNOC_SF] = &qxm_camnoc_sf,
+	[MASTER_MDP0] = &qxm_mdp0,
+	[MASTER_ROTATOR] = &qxm_rot,
+	[MASTER_VIDEO_P0] = &qxm_venus0,
+	[MASTER_VIDEO_PROC] = &qxm_venus_arm9,
+	[SLAVE_MNOC_HF_MEM_NOC] = &qns_mem_noc_hf,
+	[SLAVE_MNOC_SF_MEM_NOC] = &qns_mem_noc_sf,
+	[SLAVE_SERVICE_MNOC] = &srvc_mnoc,
+};
+
+static struct qcom_icc_desc sc7180_mmss_noc = {
+	.nodes = mmss_noc_nodes,
+	.num_nodes = ARRAY_SIZE(mmss_noc_nodes),
+	.bcms = mmss_noc_bcms,
+	.num_bcms = ARRAY_SIZE(mmss_noc_bcms),
+};
+
+static struct qcom_icc_node *npu_noc_nodes[] = {
+	[MASTER_NPU_SYS] = &amm_npu_sys,
+	[MASTER_NPU_NOC_CFG] = &qhm_npu_cfg,
+	[SLAVE_NPU_CAL_DP0] = &qhs_cal_dp0,
+	[SLAVE_NPU_CP] = &qhs_cp,
+	[SLAVE_NPU_INT_DMA_BWMON_CFG] = &qhs_dma_bwmon,
+	[SLAVE_NPU_DPM] = &qhs_dpm,
+	[SLAVE_ISENSE_CFG] = &qhs_isense,
+	[SLAVE_NPU_LLM_CFG] = &qhs_llm,
+	[SLAVE_NPU_TCM] = &qhs_tcm,
+	[SLAVE_NPU_COMPUTE_NOC] = &qns_npu_sys,
+	[SLAVE_SERVICE_NPU_NOC] = &srvc_noc,
+};
+
+static struct qcom_icc_desc sc7180_npu_noc = {
+	.nodes = npu_noc_nodes,
+	.num_nodes = ARRAY_SIZE(npu_noc_nodes),
+};
+
+static struct qcom_icc_bcm *qup_virt_bcms[] = {
+	&bcm_qup0,
+};
+
+static struct qcom_icc_node *qup_virt_nodes[] = {
+	[MASTER_QUP_CORE_0] = &qup_core_master_1,
+	[MASTER_QUP_CORE_1] = &qup_core_master_2,
+	[SLAVE_QUP_CORE_0] = &qup_core_slave_1,
+	[SLAVE_QUP_CORE_1] = &qup_core_slave_2,
+};
+
+static struct qcom_icc_desc sc7180_qup_virt = {
+	.nodes = qup_virt_nodes,
+	.num_nodes = ARRAY_SIZE(qup_virt_nodes),
+	.bcms = qup_virt_bcms,
+	.num_bcms = ARRAY_SIZE(qup_virt_bcms),
+};
+
+static struct qcom_icc_bcm *system_noc_bcms[] = {
+	&bcm_sn0,
+	&bcm_sn1,
+	&bcm_sn2,
+	&bcm_sn3,
+	&bcm_sn4,
+	&bcm_sn7,
+	&bcm_sn9,
+	&bcm_sn12,
+};
+
+static struct qcom_icc_node *system_noc_nodes[] = {
+	[MASTER_SNOC_CFG] = &qhm_snoc_cfg,
+	[MASTER_A1NOC_SNOC] = &qnm_aggre1_noc,
+	[MASTER_A2NOC_SNOC] = &qnm_aggre2_noc,
+	[MASTER_GEM_NOC_SNOC] = &qnm_gemnoc,
+	[MASTER_PIMEM] = &qxm_pimem,
+	[SLAVE_APPSS] = &qhs_apss,
+	[SLAVE_SNOC_CNOC] = &qns_cnoc,
+	[SLAVE_SNOC_GEM_NOC_GC] = &qns_gemnoc_gc,
+	[SLAVE_SNOC_GEM_NOC_SF] = &qns_gemnoc_sf,
+	[SLAVE_IMEM] = &qxs_imem,
+	[SLAVE_PIMEM] = &qxs_pimem,
+	[SLAVE_SERVICE_SNOC] = &srvc_snoc,
+	[SLAVE_QDSS_STM] = &xs_qdss_stm,
+	[SLAVE_TCU] = &xs_sys_tcu_cfg,
+};
+
+static struct qcom_icc_desc sc7180_system_noc = {
+	.nodes = system_noc_nodes,
+	.num_nodes = ARRAY_SIZE(system_noc_nodes),
+	.bcms = system_noc_bcms,
+	.num_bcms = ARRAY_SIZE(system_noc_bcms),
+};
+
+static int qnoc_probe(struct platform_device *pdev)
+{
+	const struct qcom_icc_desc *desc;
+	struct icc_onecell_data *data;
+	struct icc_provider *provider;
+	struct qcom_icc_node **qnodes;
+	struct qcom_icc_provider *qp;
+	struct icc_node *node;
+	size_t num_nodes, i;
+	int ret;
+
+	desc = device_get_match_data(&pdev->dev);
+	if (!desc)
+		return -EINVAL;
+
+	qnodes = desc->nodes;
+	num_nodes = desc->num_nodes;
+
+	qp = devm_kzalloc(&pdev->dev, sizeof(*qp), GFP_KERNEL);
+	if (!qp)
+		return -ENOMEM;
+
+	data = devm_kcalloc(&pdev->dev, num_nodes, sizeof(*node), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	provider = &qp->provider;
+	provider->dev = &pdev->dev;
+	provider->set = qcom_icc_set;
+	provider->pre_aggregate = qcom_icc_pre_aggregate;
+	provider->aggregate = qcom_icc_aggregate;
+	provider->xlate = of_icc_xlate_onecell;
+	INIT_LIST_HEAD(&provider->nodes);
+	provider->data = data;
+
+	qp->dev = &pdev->dev;
+	qp->bcms = desc->bcms;
+	qp->num_bcms = desc->num_bcms;
+
+	qp->voter = of_bcm_voter_get(qp->dev, NULL);
+	if (IS_ERR(qp->voter))
+		return PTR_ERR(qp->voter);
+
+	ret = icc_provider_add(provider);
+	if (ret) {
+		dev_err(&pdev->dev, "error adding interconnect provider\n");
+		return ret;
+	}
+
+	for (i = 0; i < num_nodes; i++) {
+		size_t j;
+
+		if (!qnodes[i])
+			continue;
+
+		node = icc_node_create(qnodes[i]->id);
+		if (IS_ERR(node)) {
+			ret = PTR_ERR(node);
+			goto err;
+		}
+
+		node->name = qnodes[i]->name;
+		node->data = qnodes[i];
+		icc_node_add(node, provider);
+
+		for (j = 0; j < qnodes[i]->num_links; j++)
+			icc_link_create(node, qnodes[i]->links[j]);
+
+		data->nodes[i] = node;
+	}
+	data->num_nodes = num_nodes;
+
+	for (i = 0; i < qp->num_bcms; i++)
+		qcom_icc_bcm_init(qp->bcms[i], &pdev->dev);
+
+	platform_set_drvdata(pdev, qp);
+
+	return 0;
+err:
+	icc_nodes_remove(provider);
+	icc_provider_del(provider);
+	return ret;
+}
+
+static int qnoc_remove(struct platform_device *pdev)
+{
+	struct qcom_icc_provider *qp = platform_get_drvdata(pdev);
+
+	icc_nodes_remove(&qp->provider);
+	return icc_provider_del(&qp->provider);
+}
+
+static const struct of_device_id qnoc_of_match[] = {
+	{ .compatible = "qcom,sc7180-aggre1-noc",
+	  .data = &sc7180_aggre1_noc},
+	{ .compatible = "qcom,sc7180-aggre2-noc",
+	  .data = &sc7180_aggre2_noc},
+	{ .compatible = "qcom,sc7180-camnoc-virt",
+	  .data = &sc7180_camnoc_virt},
+	{ .compatible = "qcom,sc7180-compute-noc",
+	  .data = &sc7180_compute_noc},
+	{ .compatible = "qcom,sc7180-config-noc",
+	  .data = &sc7180_config_noc},
+	{ .compatible = "qcom,sc7180-dc-noc",
+	  .data = &sc7180_dc_noc},
+	{ .compatible = "qcom,sc7180-gem-noc",
+	  .data = &sc7180_gem_noc},
+	{ .compatible = "qcom,sc7180-ipa-virt",
+	  .data = &sc7180_ipa_virt},
+	{ .compatible = "qcom,sc7180-mc-virt",
+	  .data = &sc7180_mc_virt},
+	{ .compatible = "qcom,sc7180-mmss-noc",
+	  .data = &sc7180_mmss_noc},
+	{ .compatible = "qcom,sc7180-npu-noc",
+	  .data = &sc7180_npu_noc},
+	{ .compatible = "qcom,sc7180-qup-virt",
+	  .data = &sc7180_qup_virt},
+	{ .compatible = "qcom,sc7180-system-noc",
+	  .data = &sc7180_system_noc},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, qnoc_of_match);
+
+static struct platform_driver qnoc_driver = {
+	.probe = qnoc_probe,
+	.remove = qnoc_remove,
+	.driver = {
+		.name = "qnoc-sc7180",
+		.of_match_table = qnoc_of_match,
+	},
+};
+module_platform_driver(qnoc_driver);
+
+MODULE_DESCRIPTION("Qualcomm SC7180 NoC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/interconnect/qcom/sc7180.h b/drivers/interconnect/qcom/sc7180.h
new file mode 100644
index 0000000..c6212a1
--- /dev/null
+++ b/drivers/interconnect/qcom/sc7180.h
@@ -0,0 +1,151 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Qualcomm #define SC7180 interconnect IDs
+ *
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef __DRIVERS_INTERCONNECT_QCOM_SC7180_H
+#define __DRIVERS_INTERCONNECT_QCOM_SC7180_H
+
+#define SC7180_MASTER_APPSS_PROC			0
+#define SC7180_MASTER_SYS_TCU				1
+#define SC7180_MASTER_NPU_SYS				2
+#define SC7180_MASTER_IPA_CORE				3
+#define SC7180_MASTER_LLCC				4
+#define SC7180_MASTER_A1NOC_CFG				5
+#define SC7180_MASTER_A2NOC_CFG				6
+#define SC7180_MASTER_CNOC_DC_NOC			7
+#define SC7180_MASTER_GEM_NOC_CFG			8
+#define SC7180_MASTER_CNOC_MNOC_CFG			9
+#define SC7180_MASTER_NPU_NOC_CFG			10
+#define SC7180_MASTER_QDSS_BAM				11
+#define SC7180_MASTER_QSPI				12
+#define SC7180_MASTER_QUP_0				13
+#define SC7180_MASTER_QUP_1				14
+#define SC7180_MASTER_SNOC_CFG				15
+#define SC7180_MASTER_A1NOC_SNOC			16
+#define SC7180_MASTER_A2NOC_SNOC			17
+#define SC7180_MASTER_COMPUTE_NOC			18
+#define SC7180_MASTER_GEM_NOC_SNOC			19
+#define SC7180_MASTER_MNOC_HF_MEM_NOC			20
+#define SC7180_MASTER_MNOC_SF_MEM_NOC			21
+#define SC7180_MASTER_NPU				22
+#define SC7180_MASTER_SNOC_CNOC				23
+#define SC7180_MASTER_SNOC_GC_MEM_NOC			24
+#define SC7180_MASTER_SNOC_SF_MEM_NOC			25
+#define SC7180_MASTER_QUP_CORE_0			26
+#define SC7180_MASTER_QUP_CORE_1			27
+#define SC7180_MASTER_CAMNOC_HF0			28
+#define SC7180_MASTER_CAMNOC_HF1			29
+#define SC7180_MASTER_CAMNOC_HF0_UNCOMP			30
+#define SC7180_MASTER_CAMNOC_HF1_UNCOMP			31
+#define SC7180_MASTER_CAMNOC_SF				32
+#define SC7180_MASTER_CAMNOC_SF_UNCOMP			33
+#define SC7180_MASTER_CRYPTO				34
+#define SC7180_MASTER_GFX3D				35
+#define SC7180_MASTER_IPA				36
+#define SC7180_MASTER_MDP0				37
+#define SC7180_MASTER_NPU_PROC				38
+#define SC7180_MASTER_PIMEM				39
+#define SC7180_MASTER_ROTATOR				40
+#define SC7180_MASTER_VIDEO_P0				41
+#define SC7180_MASTER_VIDEO_PROC			42
+#define SC7180_MASTER_QDSS_DAP				43
+#define SC7180_MASTER_QDSS_ETR				44
+#define SC7180_MASTER_SDCC_2				45
+#define SC7180_MASTER_UFS_MEM				46
+#define SC7180_MASTER_USB3				47
+#define SC7180_MASTER_EMMC				48
+#define SC7180_SLAVE_EBI1				49
+#define SC7180_SLAVE_IPA_CORE				50
+#define SC7180_SLAVE_A1NOC_CFG				51
+#define SC7180_SLAVE_A2NOC_CFG				52
+#define SC7180_SLAVE_AHB2PHY_SOUTH			53
+#define SC7180_SLAVE_AHB2PHY_CENTER			54
+#define SC7180_SLAVE_AOP				55
+#define SC7180_SLAVE_AOSS				56
+#define SC7180_SLAVE_APPSS				57
+#define SC7180_SLAVE_BOOT_ROM				58
+#define SC7180_SLAVE_NPU_CAL_DP0			59
+#define SC7180_SLAVE_CAMERA_CFG				60
+#define SC7180_SLAVE_CAMERA_NRT_THROTTLE_CFG		61
+#define SC7180_SLAVE_CAMERA_RT_THROTTLE_CFG		62
+#define SC7180_SLAVE_CLK_CTL				63
+#define SC7180_SLAVE_NPU_CP				64
+#define SC7180_SLAVE_RBCPR_CX_CFG			65
+#define SC7180_SLAVE_RBCPR_MX_CFG			66
+#define SC7180_SLAVE_CRYPTO_0_CFG			67
+#define SC7180_SLAVE_DCC_CFG				68
+#define SC7180_SLAVE_CNOC_DDRSS				69
+#define SC7180_SLAVE_DISPLAY_CFG			70
+#define SC7180_SLAVE_DISPLAY_RT_THROTTLE_CFG		71
+#define SC7180_SLAVE_DISPLAY_THROTTLE_CFG		72
+#define SC7180_SLAVE_NPU_INT_DMA_BWMON_CFG		73
+#define SC7180_SLAVE_NPU_DPM				74
+#define SC7180_SLAVE_EMMC_CFG				75
+#define SC7180_SLAVE_GEM_NOC_CFG			76
+#define SC7180_SLAVE_GLM				77
+#define SC7180_SLAVE_GFX3D_CFG				78
+#define SC7180_SLAVE_IMEM_CFG				79
+#define SC7180_SLAVE_IPA_CFG				80
+#define SC7180_SLAVE_ISENSE_CFG				81
+#define SC7180_SLAVE_LLCC_CFG				82
+#define SC7180_SLAVE_NPU_LLM_CFG			83
+#define SC7180_SLAVE_MSS_PROC_MS_MPU_CFG		84
+#define SC7180_SLAVE_CNOC_MNOC_CFG			85
+#define SC7180_SLAVE_CNOC_MSS				86
+#define SC7180_SLAVE_NPU_CFG				87
+#define SC7180_SLAVE_NPU_DMA_BWMON_CFG			88
+#define SC7180_SLAVE_NPU_PROC_BWMON_CFG			89
+#define SC7180_SLAVE_PDM				90
+#define SC7180_SLAVE_PIMEM_CFG				91
+#define SC7180_SLAVE_PRNG				92
+#define SC7180_SLAVE_QDSS_CFG				93
+#define SC7180_SLAVE_QM_CFG				94
+#define SC7180_SLAVE_QM_MPU_CFG				95
+#define SC7180_SLAVE_QSPI_0				96
+#define SC7180_SLAVE_QUP_0				97
+#define SC7180_SLAVE_QUP_1				98
+#define SC7180_SLAVE_SDCC_2				99
+#define SC7180_SLAVE_SECURITY				100
+#define SC7180_SLAVE_SNOC_CFG				101
+#define SC7180_SLAVE_NPU_TCM				102
+#define SC7180_SLAVE_TCSR				103
+#define SC7180_SLAVE_TLMM_WEST				104
+#define SC7180_SLAVE_TLMM_NORTH				105
+#define SC7180_SLAVE_TLMM_SOUTH				106
+#define SC7180_SLAVE_UFS_MEM_CFG			107
+#define SC7180_SLAVE_USB3				108
+#define SC7180_SLAVE_VENUS_CFG				109
+#define SC7180_SLAVE_VENUS_THROTTLE_CFG			110
+#define SC7180_SLAVE_VSENSE_CTRL_CFG			111
+#define SC7180_SLAVE_A1NOC_SNOC				112
+#define SC7180_SLAVE_A2NOC_SNOC				113
+#define SC7180_SLAVE_CAMNOC_UNCOMP			114
+#define SC7180_SLAVE_CDSP_GEM_NOC			115
+#define SC7180_SLAVE_SNOC_CNOC				116
+#define SC7180_SLAVE_GEM_NOC_SNOC			117
+#define SC7180_SLAVE_SNOC_GEM_NOC_GC			118
+#define SC7180_SLAVE_SNOC_GEM_NOC_SF			119
+#define SC7180_SLAVE_LLCC				120
+#define SC7180_SLAVE_MNOC_HF_MEM_NOC			121
+#define SC7180_SLAVE_MNOC_SF_MEM_NOC			122
+#define SC7180_SLAVE_NPU_COMPUTE_NOC			123
+#define SC7180_SLAVE_QUP_CORE_0				124
+#define SC7180_SLAVE_QUP_CORE_1				125
+#define SC7180_SLAVE_IMEM				126
+#define SC7180_SLAVE_PIMEM				127
+#define SC7180_SLAVE_SERVICE_A1NOC			128
+#define SC7180_SLAVE_SERVICE_A2NOC			129
+#define SC7180_SLAVE_SERVICE_CNOC			130
+#define SC7180_SLAVE_SERVICE_GEM_NOC			131
+#define SC7180_SLAVE_SERVICE_MNOC			132
+#define SC7180_SLAVE_SERVICE_NPU_NOC			133
+#define SC7180_SLAVE_SERVICE_SNOC			134
+#define SC7180_SLAVE_QDSS_STM				135
+#define SC7180_SLAVE_TCU				136
+#define SC7180_MASTER_OSM_L3_APPS			137
+#define SC7180_SLAVE_OSM_L3				138
+
+#endif
diff --git a/drivers/interconnect/qcom/sdm845.c b/drivers/interconnect/qcom/sdm845.c
index f078cf0..b013b80 100644
--- a/drivers/interconnect/qcom/sdm845.c
+++ b/drivers/interconnect/qcom/sdm845.c
@@ -1,379 +1,245 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
- *
+ * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
  */
 
-#include <asm/div64.h>
-#include <dt-bindings/interconnect/qcom,sdm845.h>
 #include <linux/device.h>
 #include <linux/interconnect.h>
 #include <linux/interconnect-provider.h>
-#include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
-#include <linux/of_platform.h>
-#include <linux/platform_device.h>
-#include <linux/sort.h>
 
-#include <soc/qcom/cmd-db.h>
-#include <soc/qcom/rpmh.h>
-#include <soc/qcom/tcs.h>
+#include <dt-bindings/interconnect/qcom,sdm845.h>
 
-#define to_qcom_provider(_provider) \
-	container_of(_provider, struct qcom_icc_provider, provider)
+#include "bcm-voter.h"
+#include "icc-rpmh.h"
+#include "sdm845.h"
 
-struct qcom_icc_provider {
-	struct icc_provider provider;
-	struct device *dev;
-	struct qcom_icc_bcm **bcms;
-	size_t num_bcms;
+DEFINE_QNODE(qhm_a1noc_cfg, SDM845_MASTER_A1NOC_CFG, 1, 4, SDM845_SLAVE_SERVICE_A1NOC);
+DEFINE_QNODE(qhm_qup1, SDM845_MASTER_BLSP_1, 1, 4, SDM845_SLAVE_A1NOC_SNOC);
+DEFINE_QNODE(qhm_tsif, SDM845_MASTER_TSIF, 1, 4, SDM845_SLAVE_A1NOC_SNOC);
+DEFINE_QNODE(xm_sdc2, SDM845_MASTER_SDCC_2, 1, 8, SDM845_SLAVE_A1NOC_SNOC);
+DEFINE_QNODE(xm_sdc4, SDM845_MASTER_SDCC_4, 1, 8, SDM845_SLAVE_A1NOC_SNOC);
+DEFINE_QNODE(xm_ufs_card, SDM845_MASTER_UFS_CARD, 1, 8, SDM845_SLAVE_A1NOC_SNOC);
+DEFINE_QNODE(xm_ufs_mem, SDM845_MASTER_UFS_MEM, 1, 8, SDM845_SLAVE_A1NOC_SNOC);
+DEFINE_QNODE(xm_pcie_0, SDM845_MASTER_PCIE_0, 1, 8, SDM845_SLAVE_ANOC_PCIE_A1NOC_SNOC);
+DEFINE_QNODE(qhm_a2noc_cfg, SDM845_MASTER_A2NOC_CFG, 1, 4, SDM845_SLAVE_SERVICE_A2NOC);
+DEFINE_QNODE(qhm_qdss_bam, SDM845_MASTER_QDSS_BAM, 1, 4, SDM845_SLAVE_A2NOC_SNOC);
+DEFINE_QNODE(qhm_qup2, SDM845_MASTER_BLSP_2, 1, 4, SDM845_SLAVE_A2NOC_SNOC);
+DEFINE_QNODE(qnm_cnoc, SDM845_MASTER_CNOC_A2NOC, 1, 8, SDM845_SLAVE_A2NOC_SNOC);
+DEFINE_QNODE(qxm_crypto, SDM845_MASTER_CRYPTO, 1, 8, SDM845_SLAVE_A2NOC_SNOC);
+DEFINE_QNODE(qxm_ipa, SDM845_MASTER_IPA, 1, 8, SDM845_SLAVE_A2NOC_SNOC);
+DEFINE_QNODE(xm_pcie3_1, SDM845_MASTER_PCIE_1, 1, 8, SDM845_SLAVE_ANOC_PCIE_SNOC);
+DEFINE_QNODE(xm_qdss_etr, SDM845_MASTER_QDSS_ETR, 1, 8, SDM845_SLAVE_A2NOC_SNOC);
+DEFINE_QNODE(xm_usb3_0, SDM845_MASTER_USB3_0, 1, 8, SDM845_SLAVE_A2NOC_SNOC);
+DEFINE_QNODE(xm_usb3_1, SDM845_MASTER_USB3_1, 1, 8, SDM845_SLAVE_A2NOC_SNOC);
+DEFINE_QNODE(qxm_camnoc_hf0_uncomp, SDM845_MASTER_CAMNOC_HF0_UNCOMP, 1, 32, SDM845_SLAVE_CAMNOC_UNCOMP);
+DEFINE_QNODE(qxm_camnoc_hf1_uncomp, SDM845_MASTER_CAMNOC_HF1_UNCOMP, 1, 32, SDM845_SLAVE_CAMNOC_UNCOMP);
+DEFINE_QNODE(qxm_camnoc_sf_uncomp, SDM845_MASTER_CAMNOC_SF_UNCOMP, 1, 32, SDM845_SLAVE_CAMNOC_UNCOMP);
+DEFINE_QNODE(qhm_spdm, SDM845_MASTER_SPDM, 1, 4, SDM845_SLAVE_CNOC_A2NOC);
+DEFINE_QNODE(qhm_tic, SDM845_MASTER_TIC, 1, 4, SDM845_SLAVE_A1NOC_CFG, SDM845_SLAVE_A2NOC_CFG, SDM845_SLAVE_AOP, SDM845_SLAVE_AOSS, SDM845_SLAVE_CAMERA_CFG, SDM845_SLAVE_CLK_CTL, SDM845_SLAVE_CDSP_CFG, SDM845_SLAVE_RBCPR_CX_CFG, SDM845_SLAVE_CRYPTO_0_CFG, SDM845_SLAVE_DCC_CFG, SDM845_SLAVE_CNOC_DDRSS, SDM845_SLAVE_DISPLAY_CFG, SDM845_SLAVE_GLM, SDM845_SLAVE_GFX3D_CFG, SDM845_SLAVE_IMEM_CFG, SDM845_SLAVE_IPA_CFG, SDM845_SLAVE_CNOC_MNOC_CFG, SDM845_SLAVE_PCIE_0_CFG, SDM845_SLAVE_PCIE_1_CFG, SDM845_SLAVE_PDM, SDM845_SLAVE_SOUTH_PHY_CFG, SDM845_SLAVE_PIMEM_CFG, SDM845_SLAVE_PRNG, SDM845_SLAVE_QDSS_CFG, SDM845_SLAVE_BLSP_2, SDM845_SLAVE_BLSP_1, SDM845_SLAVE_SDCC_2, SDM845_SLAVE_SDCC_4, SDM845_SLAVE_SNOC_CFG, SDM845_SLAVE_SPDM_WRAPPER, SDM845_SLAVE_SPSS_CFG, SDM845_SLAVE_TCSR, SDM845_SLAVE_TLMM_NORTH, SDM845_SLAVE_TLMM_SOUTH, SDM845_SLAVE_TSIF, SDM845_SLAVE_UFS_CARD_CFG, SDM845_SLAVE_UFS_MEM_CFG, SDM845_SLAVE_USB3_0, SDM845_SLAVE_USB3_1, SDM845_SLAVE_VENUS_CFG, SDM845_SLAVE_VSENSE_CTRL_CFG, SDM845_SLAVE_CNOC_A2NOC, SDM845_SLAVE_SERVICE_CNOC);
+DEFINE_QNODE(qnm_snoc, SDM845_MASTER_SNOC_CNOC, 1, 8, SDM845_SLAVE_A1NOC_CFG, SDM845_SLAVE_A2NOC_CFG, SDM845_SLAVE_AOP, SDM845_SLAVE_AOSS, SDM845_SLAVE_CAMERA_CFG, SDM845_SLAVE_CLK_CTL, SDM845_SLAVE_CDSP_CFG, SDM845_SLAVE_RBCPR_CX_CFG, SDM845_SLAVE_CRYPTO_0_CFG, SDM845_SLAVE_DCC_CFG, SDM845_SLAVE_CNOC_DDRSS, SDM845_SLAVE_DISPLAY_CFG, SDM845_SLAVE_GLM, SDM845_SLAVE_GFX3D_CFG, SDM845_SLAVE_IMEM_CFG, SDM845_SLAVE_IPA_CFG, SDM845_SLAVE_CNOC_MNOC_CFG, SDM845_SLAVE_PCIE_0_CFG, SDM845_SLAVE_PCIE_1_CFG, SDM845_SLAVE_PDM, SDM845_SLAVE_SOUTH_PHY_CFG, SDM845_SLAVE_PIMEM_CFG, SDM845_SLAVE_PRNG, SDM845_SLAVE_QDSS_CFG, SDM845_SLAVE_BLSP_2, SDM845_SLAVE_BLSP_1, SDM845_SLAVE_SDCC_2, SDM845_SLAVE_SDCC_4, SDM845_SLAVE_SNOC_CFG, SDM845_SLAVE_SPDM_WRAPPER, SDM845_SLAVE_SPSS_CFG, SDM845_SLAVE_TCSR, SDM845_SLAVE_TLMM_NORTH, SDM845_SLAVE_TLMM_SOUTH, SDM845_SLAVE_TSIF, SDM845_SLAVE_UFS_CARD_CFG, SDM845_SLAVE_UFS_MEM_CFG, SDM845_SLAVE_USB3_0, SDM845_SLAVE_USB3_1, SDM845_SLAVE_VENUS_CFG, SDM845_SLAVE_VSENSE_CTRL_CFG, SDM845_SLAVE_SERVICE_CNOC);
+DEFINE_QNODE(xm_qdss_dap, SDM845_MASTER_QDSS_DAP, 1, 8, SDM845_SLAVE_A1NOC_CFG, SDM845_SLAVE_A2NOC_CFG, SDM845_SLAVE_AOP, SDM845_SLAVE_AOSS, SDM845_SLAVE_CAMERA_CFG, SDM845_SLAVE_CLK_CTL, SDM845_SLAVE_CDSP_CFG, SDM845_SLAVE_RBCPR_CX_CFG, SDM845_SLAVE_CRYPTO_0_CFG, SDM845_SLAVE_DCC_CFG, SDM845_SLAVE_CNOC_DDRSS, SDM845_SLAVE_DISPLAY_CFG, SDM845_SLAVE_GLM, SDM845_SLAVE_GFX3D_CFG, SDM845_SLAVE_IMEM_CFG, SDM845_SLAVE_IPA_CFG, SDM845_SLAVE_CNOC_MNOC_CFG, SDM845_SLAVE_PCIE_0_CFG, SDM845_SLAVE_PCIE_1_CFG, SDM845_SLAVE_PDM, SDM845_SLAVE_SOUTH_PHY_CFG, SDM845_SLAVE_PIMEM_CFG, SDM845_SLAVE_PRNG, SDM845_SLAVE_QDSS_CFG, SDM845_SLAVE_BLSP_2, SDM845_SLAVE_BLSP_1, SDM845_SLAVE_SDCC_2, SDM845_SLAVE_SDCC_4, SDM845_SLAVE_SNOC_CFG, SDM845_SLAVE_SPDM_WRAPPER, SDM845_SLAVE_SPSS_CFG, SDM845_SLAVE_TCSR, SDM845_SLAVE_TLMM_NORTH, SDM845_SLAVE_TLMM_SOUTH, SDM845_SLAVE_TSIF, SDM845_SLAVE_UFS_CARD_CFG, SDM845_SLAVE_UFS_MEM_CFG, SDM845_SLAVE_USB3_0, SDM845_SLAVE_USB3_1, SDM845_SLAVE_VENUS_CFG, SDM845_SLAVE_VSENSE_CTRL_CFG, SDM845_SLAVE_CNOC_A2NOC, SDM845_SLAVE_SERVICE_CNOC);
+DEFINE_QNODE(qhm_cnoc, SDM845_MASTER_CNOC_DC_NOC, 1, 4, SDM845_SLAVE_LLCC_CFG, SDM845_SLAVE_MEM_NOC_CFG);
+DEFINE_QNODE(acm_l3, SDM845_MASTER_APPSS_PROC, 1, 16, SDM845_SLAVE_GNOC_SNOC, SDM845_SLAVE_GNOC_MEM_NOC, SDM845_SLAVE_SERVICE_GNOC);
+DEFINE_QNODE(pm_gnoc_cfg, SDM845_MASTER_GNOC_CFG, 1, 4, SDM845_SLAVE_SERVICE_GNOC);
+DEFINE_QNODE(llcc_mc, SDM845_MASTER_LLCC, 4, 4, SDM845_SLAVE_EBI1);
+DEFINE_QNODE(acm_tcu, SDM845_MASTER_TCU_0, 1, 8, SDM845_SLAVE_MEM_NOC_GNOC, SDM845_SLAVE_LLCC, SDM845_SLAVE_MEM_NOC_SNOC);
+DEFINE_QNODE(qhm_memnoc_cfg, SDM845_MASTER_MEM_NOC_CFG, 1, 4, SDM845_SLAVE_MSS_PROC_MS_MPU_CFG, SDM845_SLAVE_SERVICE_MEM_NOC);
+DEFINE_QNODE(qnm_apps, SDM845_MASTER_GNOC_MEM_NOC, 2, 32, SDM845_SLAVE_LLCC);
+DEFINE_QNODE(qnm_mnoc_hf, SDM845_MASTER_MNOC_HF_MEM_NOC, 2, 32, SDM845_SLAVE_MEM_NOC_GNOC, SDM845_SLAVE_LLCC);
+DEFINE_QNODE(qnm_mnoc_sf, SDM845_MASTER_MNOC_SF_MEM_NOC, 1, 32, SDM845_SLAVE_MEM_NOC_GNOC, SDM845_SLAVE_LLCC, SDM845_SLAVE_MEM_NOC_SNOC);
+DEFINE_QNODE(qnm_snoc_gc, SDM845_MASTER_SNOC_GC_MEM_NOC, 1, 8, SDM845_SLAVE_LLCC);
+DEFINE_QNODE(qnm_snoc_sf, SDM845_MASTER_SNOC_SF_MEM_NOC, 1, 16, SDM845_SLAVE_MEM_NOC_GNOC, SDM845_SLAVE_LLCC);
+DEFINE_QNODE(qxm_gpu, SDM845_MASTER_GFX3D, 2, 32, SDM845_SLAVE_MEM_NOC_GNOC, SDM845_SLAVE_LLCC, SDM845_SLAVE_MEM_NOC_SNOC);
+DEFINE_QNODE(qhm_mnoc_cfg, SDM845_MASTER_CNOC_MNOC_CFG, 1, 4, SDM845_SLAVE_SERVICE_MNOC);
+DEFINE_QNODE(qxm_camnoc_hf0, SDM845_MASTER_CAMNOC_HF0, 1, 32, SDM845_SLAVE_MNOC_HF_MEM_NOC);
+DEFINE_QNODE(qxm_camnoc_hf1, SDM845_MASTER_CAMNOC_HF1, 1, 32, SDM845_SLAVE_MNOC_HF_MEM_NOC);
+DEFINE_QNODE(qxm_camnoc_sf, SDM845_MASTER_CAMNOC_SF, 1, 32, SDM845_SLAVE_MNOC_SF_MEM_NOC);
+DEFINE_QNODE(qxm_mdp0, SDM845_MASTER_MDP0, 1, 32, SDM845_SLAVE_MNOC_HF_MEM_NOC);
+DEFINE_QNODE(qxm_mdp1, SDM845_MASTER_MDP1, 1, 32, SDM845_SLAVE_MNOC_HF_MEM_NOC);
+DEFINE_QNODE(qxm_rot, SDM845_MASTER_ROTATOR, 1, 32, SDM845_SLAVE_MNOC_SF_MEM_NOC);
+DEFINE_QNODE(qxm_venus0, SDM845_MASTER_VIDEO_P0, 1, 32, SDM845_SLAVE_MNOC_SF_MEM_NOC);
+DEFINE_QNODE(qxm_venus1, SDM845_MASTER_VIDEO_P1, 1, 32, SDM845_SLAVE_MNOC_SF_MEM_NOC);
+DEFINE_QNODE(qxm_venus_arm9, SDM845_MASTER_VIDEO_PROC, 1, 8, SDM845_SLAVE_MNOC_SF_MEM_NOC);
+DEFINE_QNODE(qhm_snoc_cfg, SDM845_MASTER_SNOC_CFG, 1, 4, SDM845_SLAVE_SERVICE_SNOC);
+DEFINE_QNODE(qnm_aggre1_noc, SDM845_MASTER_A1NOC_SNOC, 1, 16, SDM845_SLAVE_APPSS, SDM845_SLAVE_SNOC_CNOC, SDM845_SLAVE_SNOC_MEM_NOC_SF, SDM845_SLAVE_IMEM, SDM845_SLAVE_PIMEM, SDM845_SLAVE_QDSS_STM);
+DEFINE_QNODE(qnm_aggre2_noc, SDM845_MASTER_A2NOC_SNOC, 1, 16, SDM845_SLAVE_APPSS, SDM845_SLAVE_SNOC_CNOC, SDM845_SLAVE_SNOC_MEM_NOC_SF, SDM845_SLAVE_IMEM, SDM845_SLAVE_PCIE_0, SDM845_SLAVE_PCIE_1, SDM845_SLAVE_PIMEM, SDM845_SLAVE_QDSS_STM, SDM845_SLAVE_TCU);
+DEFINE_QNODE(qnm_gladiator_sodv, SDM845_MASTER_GNOC_SNOC, 1, 8, SDM845_SLAVE_APPSS, SDM845_SLAVE_SNOC_CNOC, SDM845_SLAVE_IMEM, SDM845_SLAVE_PCIE_0, SDM845_SLAVE_PCIE_1, SDM845_SLAVE_PIMEM, SDM845_SLAVE_QDSS_STM, SDM845_SLAVE_TCU);
+DEFINE_QNODE(qnm_memnoc, SDM845_MASTER_MEM_NOC_SNOC, 1, 8, SDM845_SLAVE_APPSS, SDM845_SLAVE_SNOC_CNOC, SDM845_SLAVE_IMEM, SDM845_SLAVE_PIMEM, SDM845_SLAVE_QDSS_STM);
+DEFINE_QNODE(qnm_pcie_anoc, SDM845_MASTER_ANOC_PCIE_SNOC, 1, 16, SDM845_SLAVE_APPSS, SDM845_SLAVE_SNOC_CNOC, SDM845_SLAVE_SNOC_MEM_NOC_SF, SDM845_SLAVE_IMEM, SDM845_SLAVE_QDSS_STM);
+DEFINE_QNODE(qxm_pimem, SDM845_MASTER_PIMEM, 1, 8, SDM845_SLAVE_SNOC_MEM_NOC_GC, SDM845_SLAVE_IMEM);
+DEFINE_QNODE(xm_gic, SDM845_MASTER_GIC, 1, 8, SDM845_SLAVE_SNOC_MEM_NOC_GC, SDM845_SLAVE_IMEM);
+DEFINE_QNODE(qns_a1noc_snoc, SDM845_SLAVE_A1NOC_SNOC, 1, 16, SDM845_MASTER_A1NOC_SNOC);
+DEFINE_QNODE(srvc_aggre1_noc, SDM845_SLAVE_SERVICE_A1NOC, 1, 4, 0);
+DEFINE_QNODE(qns_pcie_a1noc_snoc, SDM845_SLAVE_ANOC_PCIE_A1NOC_SNOC, 1, 16, SDM845_MASTER_ANOC_PCIE_SNOC);
+DEFINE_QNODE(qns_a2noc_snoc, SDM845_SLAVE_A2NOC_SNOC, 1, 16, SDM845_MASTER_A2NOC_SNOC);
+DEFINE_QNODE(qns_pcie_snoc, SDM845_SLAVE_ANOC_PCIE_SNOC, 1, 16, SDM845_MASTER_ANOC_PCIE_SNOC);
+DEFINE_QNODE(srvc_aggre2_noc, SDM845_SLAVE_SERVICE_A2NOC, 1, 4);
+DEFINE_QNODE(qns_camnoc_uncomp, SDM845_SLAVE_CAMNOC_UNCOMP, 1, 32);
+DEFINE_QNODE(qhs_a1_noc_cfg, SDM845_SLAVE_A1NOC_CFG, 1, 4, SDM845_MASTER_A1NOC_CFG);
+DEFINE_QNODE(qhs_a2_noc_cfg, SDM845_SLAVE_A2NOC_CFG, 1, 4, SDM845_MASTER_A2NOC_CFG);
+DEFINE_QNODE(qhs_aop, SDM845_SLAVE_AOP, 1, 4);
+DEFINE_QNODE(qhs_aoss, SDM845_SLAVE_AOSS, 1, 4);
+DEFINE_QNODE(qhs_camera_cfg, SDM845_SLAVE_CAMERA_CFG, 1, 4);
+DEFINE_QNODE(qhs_clk_ctl, SDM845_SLAVE_CLK_CTL, 1, 4);
+DEFINE_QNODE(qhs_compute_dsp_cfg, SDM845_SLAVE_CDSP_CFG, 1, 4);
+DEFINE_QNODE(qhs_cpr_cx, SDM845_SLAVE_RBCPR_CX_CFG, 1, 4);
+DEFINE_QNODE(qhs_crypto0_cfg, SDM845_SLAVE_CRYPTO_0_CFG, 1, 4);
+DEFINE_QNODE(qhs_dcc_cfg, SDM845_SLAVE_DCC_CFG, 1, 4, SDM845_MASTER_CNOC_DC_NOC);
+DEFINE_QNODE(qhs_ddrss_cfg, SDM845_SLAVE_CNOC_DDRSS, 1, 4);
+DEFINE_QNODE(qhs_display_cfg, SDM845_SLAVE_DISPLAY_CFG, 1, 4);
+DEFINE_QNODE(qhs_glm, SDM845_SLAVE_GLM, 1, 4);
+DEFINE_QNODE(qhs_gpuss_cfg, SDM845_SLAVE_GFX3D_CFG, 1, 8);
+DEFINE_QNODE(qhs_imem_cfg, SDM845_SLAVE_IMEM_CFG, 1, 4);
+DEFINE_QNODE(qhs_ipa, SDM845_SLAVE_IPA_CFG, 1, 4);
+DEFINE_QNODE(qhs_mnoc_cfg, SDM845_SLAVE_CNOC_MNOC_CFG, 1, 4, SDM845_MASTER_CNOC_MNOC_CFG);
+DEFINE_QNODE(qhs_pcie0_cfg, SDM845_SLAVE_PCIE_0_CFG, 1, 4);
+DEFINE_QNODE(qhs_pcie_gen3_cfg, SDM845_SLAVE_PCIE_1_CFG, 1, 4);
+DEFINE_QNODE(qhs_pdm, SDM845_SLAVE_PDM, 1, 4);
+DEFINE_QNODE(qhs_phy_refgen_south, SDM845_SLAVE_SOUTH_PHY_CFG, 1, 4);
+DEFINE_QNODE(qhs_pimem_cfg, SDM845_SLAVE_PIMEM_CFG, 1, 4);
+DEFINE_QNODE(qhs_prng, SDM845_SLAVE_PRNG, 1, 4);
+DEFINE_QNODE(qhs_qdss_cfg, SDM845_SLAVE_QDSS_CFG, 1, 4);
+DEFINE_QNODE(qhs_qupv3_north, SDM845_SLAVE_BLSP_2, 1, 4);
+DEFINE_QNODE(qhs_qupv3_south, SDM845_SLAVE_BLSP_1, 1, 4);
+DEFINE_QNODE(qhs_sdc2, SDM845_SLAVE_SDCC_2, 1, 4);
+DEFINE_QNODE(qhs_sdc4, SDM845_SLAVE_SDCC_4, 1, 4);
+DEFINE_QNODE(qhs_snoc_cfg, SDM845_SLAVE_SNOC_CFG, 1, 4, SDM845_MASTER_SNOC_CFG);
+DEFINE_QNODE(qhs_spdm, SDM845_SLAVE_SPDM_WRAPPER, 1, 4);
+DEFINE_QNODE(qhs_spss_cfg, SDM845_SLAVE_SPSS_CFG, 1, 4);
+DEFINE_QNODE(qhs_tcsr, SDM845_SLAVE_TCSR, 1, 4);
+DEFINE_QNODE(qhs_tlmm_north, SDM845_SLAVE_TLMM_NORTH, 1, 4);
+DEFINE_QNODE(qhs_tlmm_south, SDM845_SLAVE_TLMM_SOUTH, 1, 4);
+DEFINE_QNODE(qhs_tsif, SDM845_SLAVE_TSIF, 1, 4);
+DEFINE_QNODE(qhs_ufs_card_cfg, SDM845_SLAVE_UFS_CARD_CFG, 1, 4);
+DEFINE_QNODE(qhs_ufs_mem_cfg, SDM845_SLAVE_UFS_MEM_CFG, 1, 4);
+DEFINE_QNODE(qhs_usb3_0, SDM845_SLAVE_USB3_0, 1, 4);
+DEFINE_QNODE(qhs_usb3_1, SDM845_SLAVE_USB3_1, 1, 4);
+DEFINE_QNODE(qhs_venus_cfg, SDM845_SLAVE_VENUS_CFG, 1, 4);
+DEFINE_QNODE(qhs_vsense_ctrl_cfg, SDM845_SLAVE_VSENSE_CTRL_CFG, 1, 4);
+DEFINE_QNODE(qns_cnoc_a2noc, SDM845_SLAVE_CNOC_A2NOC, 1, 8, SDM845_MASTER_CNOC_A2NOC);
+DEFINE_QNODE(srvc_cnoc, SDM845_SLAVE_SERVICE_CNOC, 1, 4);
+DEFINE_QNODE(qhs_llcc, SDM845_SLAVE_LLCC_CFG, 1, 4);
+DEFINE_QNODE(qhs_memnoc, SDM845_SLAVE_MEM_NOC_CFG, 1, 4, SDM845_MASTER_MEM_NOC_CFG);
+DEFINE_QNODE(qns_gladiator_sodv, SDM845_SLAVE_GNOC_SNOC, 1, 8, SDM845_MASTER_GNOC_SNOC);
+DEFINE_QNODE(qns_gnoc_memnoc, SDM845_SLAVE_GNOC_MEM_NOC, 2, 32, SDM845_MASTER_GNOC_MEM_NOC);
+DEFINE_QNODE(srvc_gnoc, SDM845_SLAVE_SERVICE_GNOC, 1, 4);
+DEFINE_QNODE(ebi, SDM845_SLAVE_EBI1, 4, 4);
+DEFINE_QNODE(qhs_mdsp_ms_mpu_cfg, SDM845_SLAVE_MSS_PROC_MS_MPU_CFG, 1, 4);
+DEFINE_QNODE(qns_apps_io, SDM845_SLAVE_MEM_NOC_GNOC, 1, 32);
+DEFINE_QNODE(qns_llcc, SDM845_SLAVE_LLCC, 4, 16, SDM845_MASTER_LLCC);
+DEFINE_QNODE(qns_memnoc_snoc, SDM845_SLAVE_MEM_NOC_SNOC, 1, 8, SDM845_MASTER_MEM_NOC_SNOC);
+DEFINE_QNODE(srvc_memnoc, SDM845_SLAVE_SERVICE_MEM_NOC, 1, 4);
+DEFINE_QNODE(qns2_mem_noc, SDM845_SLAVE_MNOC_SF_MEM_NOC, 1, 32, SDM845_MASTER_MNOC_SF_MEM_NOC);
+DEFINE_QNODE(qns_mem_noc_hf, SDM845_SLAVE_MNOC_HF_MEM_NOC, 2, 32, SDM845_MASTER_MNOC_HF_MEM_NOC);
+DEFINE_QNODE(srvc_mnoc, SDM845_SLAVE_SERVICE_MNOC, 1, 4);
+DEFINE_QNODE(qhs_apss, SDM845_SLAVE_APPSS, 1, 8);
+DEFINE_QNODE(qns_cnoc, SDM845_SLAVE_SNOC_CNOC, 1, 8, SDM845_MASTER_SNOC_CNOC);
+DEFINE_QNODE(qns_memnoc_gc, SDM845_SLAVE_SNOC_MEM_NOC_GC, 1, 8, SDM845_MASTER_SNOC_GC_MEM_NOC);
+DEFINE_QNODE(qns_memnoc_sf, SDM845_SLAVE_SNOC_MEM_NOC_SF, 1, 16, SDM845_MASTER_SNOC_SF_MEM_NOC);
+DEFINE_QNODE(qxs_imem, SDM845_SLAVE_IMEM, 1, 8);
+DEFINE_QNODE(qxs_pcie, SDM845_SLAVE_PCIE_0, 1, 8);
+DEFINE_QNODE(qxs_pcie_gen3, SDM845_SLAVE_PCIE_1, 1, 8);
+DEFINE_QNODE(qxs_pimem, SDM845_SLAVE_PIMEM, 1, 8);
+DEFINE_QNODE(srvc_snoc, SDM845_SLAVE_SERVICE_SNOC, 1, 4);
+DEFINE_QNODE(xs_qdss_stm, SDM845_SLAVE_QDSS_STM, 1, 4);
+DEFINE_QNODE(xs_sys_tcu_cfg, SDM845_SLAVE_TCU, 1, 8);
+
+DEFINE_QBCM(bcm_acv, "ACV", false, &ebi);
+DEFINE_QBCM(bcm_mc0, "MC0", true, &ebi);
+DEFINE_QBCM(bcm_sh0, "SH0", true, &qns_llcc);
+DEFINE_QBCM(bcm_mm0, "MM0", false, &qns_mem_noc_hf);
+DEFINE_QBCM(bcm_sh1, "SH1", false, &qns_apps_io);
+DEFINE_QBCM(bcm_mm1, "MM1", false, &qxm_camnoc_hf0_uncomp, &qxm_camnoc_hf1_uncomp, &qxm_camnoc_sf_uncomp, &qxm_camnoc_hf0, &qxm_camnoc_hf1, &qxm_mdp0, &qxm_mdp1);
+DEFINE_QBCM(bcm_sh2, "SH2", false, &qns_memnoc_snoc);
+DEFINE_QBCM(bcm_mm2, "MM2", false, &qns2_mem_noc);
+DEFINE_QBCM(bcm_sh3, "SH3", false, &acm_tcu);
+DEFINE_QBCM(bcm_mm3, "MM3", false, &qxm_camnoc_sf, &qxm_rot, &qxm_venus0, &qxm_venus1, &qxm_venus_arm9);
+DEFINE_QBCM(bcm_sh5, "SH5", false, &qnm_apps);
+DEFINE_QBCM(bcm_sn0, "SN0", true, &qns_memnoc_sf);
+DEFINE_QBCM(bcm_ce0, "CE0", false, &qxm_crypto);
+DEFINE_QBCM(bcm_cn0, "CN0", false, &qhm_spdm, &qhm_tic, &qnm_snoc, &xm_qdss_dap, &qhs_a1_noc_cfg, &qhs_a2_noc_cfg, &qhs_aop, &qhs_aoss, &qhs_camera_cfg, &qhs_clk_ctl, &qhs_compute_dsp_cfg, &qhs_cpr_cx, &qhs_crypto0_cfg, &qhs_dcc_cfg, &qhs_ddrss_cfg, &qhs_display_cfg, &qhs_glm, &qhs_gpuss_cfg, &qhs_imem_cfg, &qhs_ipa, &qhs_mnoc_cfg, &qhs_pcie0_cfg, &qhs_pcie_gen3_cfg, &qhs_pdm, &qhs_phy_refgen_south, &qhs_pimem_cfg, &qhs_prng, &qhs_qdss_cfg, &qhs_qupv3_north, &qhs_qupv3_south, &qhs_sdc2, &qhs_sdc4, &qhs_snoc_cfg, &qhs_spdm, &qhs_spss_cfg, &qhs_tcsr, &qhs_tlmm_north, &qhs_tlmm_south, &qhs_tsif, &qhs_ufs_card_cfg, &qhs_ufs_mem_cfg, &qhs_usb3_0, &qhs_usb3_1, &qhs_venus_cfg, &qhs_vsense_ctrl_cfg, &qns_cnoc_a2noc, &srvc_cnoc);
+DEFINE_QBCM(bcm_qup0, "QUP0", false, &qhm_qup1, &qhm_qup2);
+DEFINE_QBCM(bcm_sn1, "SN1", false, &qxs_imem);
+DEFINE_QBCM(bcm_sn2, "SN2", false, &qns_memnoc_gc);
+DEFINE_QBCM(bcm_sn3, "SN3", false, &qns_cnoc);
+DEFINE_QBCM(bcm_sn4, "SN4", false, &qxm_pimem);
+DEFINE_QBCM(bcm_sn5, "SN5", false, &xs_qdss_stm);
+DEFINE_QBCM(bcm_sn6, "SN6", false, &qhs_apss, &srvc_snoc, &xs_sys_tcu_cfg);
+DEFINE_QBCM(bcm_sn7, "SN7", false, &qxs_pcie);
+DEFINE_QBCM(bcm_sn8, "SN8", false, &qxs_pcie_gen3);
+DEFINE_QBCM(bcm_sn9, "SN9", false, &srvc_aggre1_noc, &qnm_aggre1_noc);
+DEFINE_QBCM(bcm_sn11, "SN11", false, &srvc_aggre2_noc, &qnm_aggre2_noc);
+DEFINE_QBCM(bcm_sn12, "SN12", false, &qnm_gladiator_sodv, &xm_gic);
+DEFINE_QBCM(bcm_sn14, "SN14", false, &qnm_pcie_anoc);
+DEFINE_QBCM(bcm_sn15, "SN15", false, &qnm_memnoc);
+
+static struct qcom_icc_bcm *aggre1_noc_bcms[] = {
+	&bcm_sn9,
 };
 
-/**
- * struct bcm_db - Auxiliary data pertaining to each Bus Clock Manager (BCM)
- * @unit: divisor used to convert bytes/sec bw value to an RPMh msg
- * @width: multiplier used to convert bytes/sec bw value to an RPMh msg
- * @vcd: virtual clock domain that this bcm belongs to
- * @reserved: reserved field
- */
-struct bcm_db {
-	__le32 unit;
-	__le16 width;
-	u8 vcd;
-	u8 reserved;
-};
-
-#define SDM845_MAX_LINKS	43
-#define SDM845_MAX_BCMS		30
-#define SDM845_MAX_BCM_PER_NODE	2
-#define SDM845_MAX_VCD		10
-
-/*
- * The AMC bucket denotes constraints that are applied to hardware when
- * icc_set_bw() completes, whereas the WAKE and SLEEP constraints are applied
- * when the execution environment transitions between active and low power mode.
- */
-#define QCOM_ICC_BUCKET_AMC		0
-#define QCOM_ICC_BUCKET_WAKE		1
-#define QCOM_ICC_BUCKET_SLEEP		2
-#define QCOM_ICC_NUM_BUCKETS		3
-#define QCOM_ICC_TAG_AMC		BIT(QCOM_ICC_BUCKET_AMC)
-#define QCOM_ICC_TAG_WAKE		BIT(QCOM_ICC_BUCKET_WAKE)
-#define QCOM_ICC_TAG_SLEEP		BIT(QCOM_ICC_BUCKET_SLEEP)
-#define QCOM_ICC_TAG_ACTIVE_ONLY	(QCOM_ICC_TAG_AMC | QCOM_ICC_TAG_WAKE)
-#define QCOM_ICC_TAG_ALWAYS		(QCOM_ICC_TAG_AMC | QCOM_ICC_TAG_WAKE |\
-					 QCOM_ICC_TAG_SLEEP)
-
-/**
- * struct qcom_icc_node - Qualcomm specific interconnect nodes
- * @name: the node name used in debugfs
- * @links: an array of nodes where we can go next while traversing
- * @id: a unique node identifier
- * @num_links: the total number of @links
- * @channels: num of channels at this node
- * @buswidth: width of the interconnect between a node and the bus
- * @sum_avg: current sum aggregate value of all avg bw requests
- * @max_peak: current max aggregate value of all peak bw requests
- * @bcms: list of bcms associated with this logical node
- * @num_bcms: num of @bcms
- */
-struct qcom_icc_node {
-	const char *name;
-	u16 links[SDM845_MAX_LINKS];
-	u16 id;
-	u16 num_links;
-	u16 channels;
-	u16 buswidth;
-	u64 sum_avg[QCOM_ICC_NUM_BUCKETS];
-	u64 max_peak[QCOM_ICC_NUM_BUCKETS];
-	struct qcom_icc_bcm *bcms[SDM845_MAX_BCM_PER_NODE];
-	size_t num_bcms;
-};
-
-/**
- * struct qcom_icc_bcm - Qualcomm specific hardware accelerator nodes
- * known as Bus Clock Manager (BCM)
- * @name: the bcm node name used to fetch BCM data from command db
- * @type: latency or bandwidth bcm
- * @addr: address offsets used when voting to RPMH
- * @vote_x: aggregated threshold values, represents sum_bw when @type is bw bcm
- * @vote_y: aggregated threshold values, represents peak_bw when @type is bw bcm
- * @dirty: flag used to indicate whether the bcm needs to be committed
- * @keepalive: flag used to indicate whether a keepalive is required
- * @aux_data: auxiliary data used when calculating threshold values and
- * communicating with RPMh
- * @list: used to link to other bcms when compiling lists for commit
- * @num_nodes: total number of @num_nodes
- * @nodes: list of qcom_icc_nodes that this BCM encapsulates
- */
-struct qcom_icc_bcm {
-	const char *name;
-	u32 type;
-	u32 addr;
-	u64 vote_x[QCOM_ICC_NUM_BUCKETS];
-	u64 vote_y[QCOM_ICC_NUM_BUCKETS];
-	bool dirty;
-	bool keepalive;
-	struct bcm_db aux_data;
-	struct list_head list;
-	size_t num_nodes;
-	struct qcom_icc_node *nodes[];
-};
-
-struct qcom_icc_fabric {
-	struct qcom_icc_node **nodes;
-	size_t num_nodes;
-};
-
-struct qcom_icc_desc {
-	struct qcom_icc_node **nodes;
-	size_t num_nodes;
-	struct qcom_icc_bcm **bcms;
-	size_t num_bcms;
-};
-
-#define DEFINE_QNODE(_name, _id, _channels, _buswidth,			\
-			_numlinks, ...)					\
-		static struct qcom_icc_node _name = {			\
-		.id = _id,						\
-		.name = #_name,						\
-		.channels = _channels,					\
-		.buswidth = _buswidth,					\
-		.num_links = _numlinks,					\
-		.links = { __VA_ARGS__ },				\
-	}
-
-DEFINE_QNODE(qhm_a1noc_cfg, MASTER_A1NOC_CFG, 1, 4, 1, SLAVE_SERVICE_A1NOC);
-DEFINE_QNODE(qhm_qup1, MASTER_BLSP_1, 1, 4, 1, SLAVE_A1NOC_SNOC);
-DEFINE_QNODE(qhm_tsif, MASTER_TSIF, 1, 4, 1, SLAVE_A1NOC_SNOC);
-DEFINE_QNODE(xm_sdc2, MASTER_SDCC_2, 1, 8, 1, SLAVE_A1NOC_SNOC);
-DEFINE_QNODE(xm_sdc4, MASTER_SDCC_4, 1, 8, 1, SLAVE_A1NOC_SNOC);
-DEFINE_QNODE(xm_ufs_card, MASTER_UFS_CARD, 1, 8, 1, SLAVE_A1NOC_SNOC);
-DEFINE_QNODE(xm_ufs_mem, MASTER_UFS_MEM, 1, 8, 1, SLAVE_A1NOC_SNOC);
-DEFINE_QNODE(xm_pcie_0, MASTER_PCIE_0, 1, 8, 1, SLAVE_ANOC_PCIE_A1NOC_SNOC);
-DEFINE_QNODE(qhm_a2noc_cfg, MASTER_A2NOC_CFG, 1, 4, 1, SLAVE_SERVICE_A2NOC);
-DEFINE_QNODE(qhm_qdss_bam, MASTER_QDSS_BAM, 1, 4, 1, SLAVE_A2NOC_SNOC);
-DEFINE_QNODE(qhm_qup2, MASTER_BLSP_2, 1, 4, 1, SLAVE_A2NOC_SNOC);
-DEFINE_QNODE(qnm_cnoc, MASTER_CNOC_A2NOC, 1, 8, 1, SLAVE_A2NOC_SNOC);
-DEFINE_QNODE(qxm_crypto, MASTER_CRYPTO, 1, 8, 1, SLAVE_A2NOC_SNOC);
-DEFINE_QNODE(qxm_ipa, MASTER_IPA, 1, 8, 1, SLAVE_A2NOC_SNOC);
-DEFINE_QNODE(xm_pcie3_1, MASTER_PCIE_1, 1, 8, 1, SLAVE_ANOC_PCIE_SNOC);
-DEFINE_QNODE(xm_qdss_etr, MASTER_QDSS_ETR, 1, 8, 1, SLAVE_A2NOC_SNOC);
-DEFINE_QNODE(xm_usb3_0, MASTER_USB3_0, 1, 8, 1, SLAVE_A2NOC_SNOC);
-DEFINE_QNODE(xm_usb3_1, MASTER_USB3_1, 1, 8, 1, SLAVE_A2NOC_SNOC);
-DEFINE_QNODE(qxm_camnoc_hf0_uncomp, MASTER_CAMNOC_HF0_UNCOMP, 1, 32, 1, SLAVE_CAMNOC_UNCOMP);
-DEFINE_QNODE(qxm_camnoc_hf1_uncomp, MASTER_CAMNOC_HF1_UNCOMP, 1, 32, 1, SLAVE_CAMNOC_UNCOMP);
-DEFINE_QNODE(qxm_camnoc_sf_uncomp, MASTER_CAMNOC_SF_UNCOMP, 1, 32, 1, SLAVE_CAMNOC_UNCOMP);
-DEFINE_QNODE(qhm_spdm, MASTER_SPDM, 1, 4, 1, SLAVE_CNOC_A2NOC);
-DEFINE_QNODE(qhm_tic, MASTER_TIC, 1, 4, 43, SLAVE_A1NOC_CFG, SLAVE_A2NOC_CFG, SLAVE_AOP, SLAVE_AOSS, SLAVE_CAMERA_CFG, SLAVE_CLK_CTL, SLAVE_CDSP_CFG, SLAVE_RBCPR_CX_CFG, SLAVE_CRYPTO_0_CFG, SLAVE_DCC_CFG, SLAVE_CNOC_DDRSS, SLAVE_DISPLAY_CFG, SLAVE_GLM, SLAVE_GFX3D_CFG, SLAVE_IMEM_CFG, SLAVE_IPA_CFG, SLAVE_CNOC_MNOC_CFG, SLAVE_PCIE_0_CFG, SLAVE_PCIE_1_CFG, SLAVE_PDM, SLAVE_SOUTH_PHY_CFG, SLAVE_PIMEM_CFG, SLAVE_PRNG, SLAVE_QDSS_CFG, SLAVE_BLSP_2, SLAVE_BLSP_1, SLAVE_SDCC_2, SLAVE_SDCC_4, SLAVE_SNOC_CFG, SLAVE_SPDM_WRAPPER, SLAVE_SPSS_CFG, SLAVE_TCSR, SLAVE_TLMM_NORTH, SLAVE_TLMM_SOUTH, SLAVE_TSIF, SLAVE_UFS_CARD_CFG, SLAVE_UFS_MEM_CFG, SLAVE_USB3_0, SLAVE_USB3_1, SLAVE_VENUS_CFG, SLAVE_VSENSE_CTRL_CFG, SLAVE_CNOC_A2NOC, SLAVE_SERVICE_CNOC);
-DEFINE_QNODE(qnm_snoc, MASTER_SNOC_CNOC, 1, 8, 42, SLAVE_A1NOC_CFG, SLAVE_A2NOC_CFG, SLAVE_AOP, SLAVE_AOSS, SLAVE_CAMERA_CFG, SLAVE_CLK_CTL, SLAVE_CDSP_CFG, SLAVE_RBCPR_CX_CFG, SLAVE_CRYPTO_0_CFG, SLAVE_DCC_CFG, SLAVE_CNOC_DDRSS, SLAVE_DISPLAY_CFG, SLAVE_GLM, SLAVE_GFX3D_CFG, SLAVE_IMEM_CFG, SLAVE_IPA_CFG, SLAVE_CNOC_MNOC_CFG, SLAVE_PCIE_0_CFG, SLAVE_PCIE_1_CFG, SLAVE_PDM, SLAVE_SOUTH_PHY_CFG, SLAVE_PIMEM_CFG, SLAVE_PRNG, SLAVE_QDSS_CFG, SLAVE_BLSP_2, SLAVE_BLSP_1, SLAVE_SDCC_2, SLAVE_SDCC_4, SLAVE_SNOC_CFG, SLAVE_SPDM_WRAPPER, SLAVE_SPSS_CFG, SLAVE_TCSR, SLAVE_TLMM_NORTH, SLAVE_TLMM_SOUTH, SLAVE_TSIF, SLAVE_UFS_CARD_CFG, SLAVE_UFS_MEM_CFG, SLAVE_USB3_0, SLAVE_USB3_1, SLAVE_VENUS_CFG, SLAVE_VSENSE_CTRL_CFG, SLAVE_SERVICE_CNOC);
-DEFINE_QNODE(xm_qdss_dap, MASTER_QDSS_DAP, 1, 8, 43, SLAVE_A1NOC_CFG, SLAVE_A2NOC_CFG, SLAVE_AOP, SLAVE_AOSS, SLAVE_CAMERA_CFG, SLAVE_CLK_CTL, SLAVE_CDSP_CFG, SLAVE_RBCPR_CX_CFG, SLAVE_CRYPTO_0_CFG, SLAVE_DCC_CFG, SLAVE_CNOC_DDRSS, SLAVE_DISPLAY_CFG, SLAVE_GLM, SLAVE_GFX3D_CFG, SLAVE_IMEM_CFG, SLAVE_IPA_CFG, SLAVE_CNOC_MNOC_CFG, SLAVE_PCIE_0_CFG, SLAVE_PCIE_1_CFG, SLAVE_PDM, SLAVE_SOUTH_PHY_CFG, SLAVE_PIMEM_CFG, SLAVE_PRNG, SLAVE_QDSS_CFG, SLAVE_BLSP_2, SLAVE_BLSP_1, SLAVE_SDCC_2, SLAVE_SDCC_4, SLAVE_SNOC_CFG, SLAVE_SPDM_WRAPPER, SLAVE_SPSS_CFG, SLAVE_TCSR, SLAVE_TLMM_NORTH, SLAVE_TLMM_SOUTH, SLAVE_TSIF, SLAVE_UFS_CARD_CFG, SLAVE_UFS_MEM_CFG, SLAVE_USB3_0, SLAVE_USB3_1, SLAVE_VENUS_CFG, SLAVE_VSENSE_CTRL_CFG, SLAVE_CNOC_A2NOC, SLAVE_SERVICE_CNOC);
-DEFINE_QNODE(qhm_cnoc, MASTER_CNOC_DC_NOC, 1, 4, 2, SLAVE_LLCC_CFG, SLAVE_MEM_NOC_CFG);
-DEFINE_QNODE(acm_l3, MASTER_APPSS_PROC, 1, 16, 3, SLAVE_GNOC_SNOC, SLAVE_GNOC_MEM_NOC, SLAVE_SERVICE_GNOC);
-DEFINE_QNODE(pm_gnoc_cfg, MASTER_GNOC_CFG, 1, 4, 1, SLAVE_SERVICE_GNOC);
-DEFINE_QNODE(llcc_mc, MASTER_LLCC, 4, 4, 1, SLAVE_EBI1);
-DEFINE_QNODE(acm_tcu, MASTER_TCU_0, 1, 8, 3, SLAVE_MEM_NOC_GNOC, SLAVE_LLCC, SLAVE_MEM_NOC_SNOC);
-DEFINE_QNODE(qhm_memnoc_cfg, MASTER_MEM_NOC_CFG, 1, 4, 2, SLAVE_MSS_PROC_MS_MPU_CFG, SLAVE_SERVICE_MEM_NOC);
-DEFINE_QNODE(qnm_apps, MASTER_GNOC_MEM_NOC, 2, 32, 1, SLAVE_LLCC);
-DEFINE_QNODE(qnm_mnoc_hf, MASTER_MNOC_HF_MEM_NOC, 2, 32, 2, SLAVE_MEM_NOC_GNOC, SLAVE_LLCC);
-DEFINE_QNODE(qnm_mnoc_sf, MASTER_MNOC_SF_MEM_NOC, 1, 32, 3, SLAVE_MEM_NOC_GNOC, SLAVE_LLCC, SLAVE_MEM_NOC_SNOC);
-DEFINE_QNODE(qnm_snoc_gc, MASTER_SNOC_GC_MEM_NOC, 1, 8, 1, SLAVE_LLCC);
-DEFINE_QNODE(qnm_snoc_sf, MASTER_SNOC_SF_MEM_NOC, 1, 16, 2, SLAVE_MEM_NOC_GNOC, SLAVE_LLCC);
-DEFINE_QNODE(qxm_gpu, MASTER_GFX3D, 2, 32, 3, SLAVE_MEM_NOC_GNOC, SLAVE_LLCC, SLAVE_MEM_NOC_SNOC);
-DEFINE_QNODE(qhm_mnoc_cfg, MASTER_CNOC_MNOC_CFG, 1, 4, 1, SLAVE_SERVICE_MNOC);
-DEFINE_QNODE(qxm_camnoc_hf0, MASTER_CAMNOC_HF0, 1, 32, 1, SLAVE_MNOC_HF_MEM_NOC);
-DEFINE_QNODE(qxm_camnoc_hf1, MASTER_CAMNOC_HF1, 1, 32, 1, SLAVE_MNOC_HF_MEM_NOC);
-DEFINE_QNODE(qxm_camnoc_sf, MASTER_CAMNOC_SF, 1, 32, 1, SLAVE_MNOC_SF_MEM_NOC);
-DEFINE_QNODE(qxm_mdp0, MASTER_MDP0, 1, 32, 1, SLAVE_MNOC_HF_MEM_NOC);
-DEFINE_QNODE(qxm_mdp1, MASTER_MDP1, 1, 32, 1, SLAVE_MNOC_HF_MEM_NOC);
-DEFINE_QNODE(qxm_rot, MASTER_ROTATOR, 1, 32, 1, SLAVE_MNOC_SF_MEM_NOC);
-DEFINE_QNODE(qxm_venus0, MASTER_VIDEO_P0, 1, 32, 1, SLAVE_MNOC_SF_MEM_NOC);
-DEFINE_QNODE(qxm_venus1, MASTER_VIDEO_P1, 1, 32, 1, SLAVE_MNOC_SF_MEM_NOC);
-DEFINE_QNODE(qxm_venus_arm9, MASTER_VIDEO_PROC, 1, 8, 1, SLAVE_MNOC_SF_MEM_NOC);
-DEFINE_QNODE(qhm_snoc_cfg, MASTER_SNOC_CFG, 1, 4, 1, SLAVE_SERVICE_SNOC);
-DEFINE_QNODE(qnm_aggre1_noc, MASTER_A1NOC_SNOC, 1, 16, 6, SLAVE_APPSS, SLAVE_SNOC_CNOC, SLAVE_SNOC_MEM_NOC_SF, SLAVE_IMEM, SLAVE_PIMEM, SLAVE_QDSS_STM);
-DEFINE_QNODE(qnm_aggre2_noc, MASTER_A2NOC_SNOC, 1, 16, 9, SLAVE_APPSS, SLAVE_SNOC_CNOC, SLAVE_SNOC_MEM_NOC_SF, SLAVE_IMEM, SLAVE_PCIE_0, SLAVE_PCIE_1, SLAVE_PIMEM, SLAVE_QDSS_STM, SLAVE_TCU);
-DEFINE_QNODE(qnm_gladiator_sodv, MASTER_GNOC_SNOC, 1, 8, 8, SLAVE_APPSS, SLAVE_SNOC_CNOC, SLAVE_IMEM, SLAVE_PCIE_0, SLAVE_PCIE_1, SLAVE_PIMEM, SLAVE_QDSS_STM, SLAVE_TCU);
-DEFINE_QNODE(qnm_memnoc, MASTER_MEM_NOC_SNOC, 1, 8, 5, SLAVE_APPSS, SLAVE_SNOC_CNOC, SLAVE_IMEM, SLAVE_PIMEM, SLAVE_QDSS_STM);
-DEFINE_QNODE(qnm_pcie_anoc, MASTER_ANOC_PCIE_SNOC, 1, 16, 5, SLAVE_APPSS, SLAVE_SNOC_CNOC, SLAVE_SNOC_MEM_NOC_SF, SLAVE_IMEM, SLAVE_QDSS_STM);
-DEFINE_QNODE(qxm_pimem, MASTER_PIMEM, 1, 8, 2, SLAVE_SNOC_MEM_NOC_GC, SLAVE_IMEM);
-DEFINE_QNODE(xm_gic, MASTER_GIC, 1, 8, 2, SLAVE_SNOC_MEM_NOC_GC, SLAVE_IMEM);
-DEFINE_QNODE(qns_a1noc_snoc, SLAVE_A1NOC_SNOC, 1, 16, 1, MASTER_A1NOC_SNOC);
-DEFINE_QNODE(srvc_aggre1_noc, SLAVE_SERVICE_A1NOC, 1, 4, 0);
-DEFINE_QNODE(qns_pcie_a1noc_snoc, SLAVE_ANOC_PCIE_A1NOC_SNOC, 1, 16, 1, MASTER_ANOC_PCIE_SNOC);
-DEFINE_QNODE(qns_a2noc_snoc, SLAVE_A2NOC_SNOC, 1, 16, 1, MASTER_A2NOC_SNOC);
-DEFINE_QNODE(qns_pcie_snoc, SLAVE_ANOC_PCIE_SNOC, 1, 16, 1, MASTER_ANOC_PCIE_SNOC);
-DEFINE_QNODE(srvc_aggre2_noc, SLAVE_SERVICE_A2NOC, 1, 4, 0);
-DEFINE_QNODE(qns_camnoc_uncomp, SLAVE_CAMNOC_UNCOMP, 1, 32, 0);
-DEFINE_QNODE(qhs_a1_noc_cfg, SLAVE_A1NOC_CFG, 1, 4, 1, MASTER_A1NOC_CFG);
-DEFINE_QNODE(qhs_a2_noc_cfg, SLAVE_A2NOC_CFG, 1, 4, 1, MASTER_A2NOC_CFG);
-DEFINE_QNODE(qhs_aop, SLAVE_AOP, 1, 4, 0);
-DEFINE_QNODE(qhs_aoss, SLAVE_AOSS, 1, 4, 0);
-DEFINE_QNODE(qhs_camera_cfg, SLAVE_CAMERA_CFG, 1, 4, 0);
-DEFINE_QNODE(qhs_clk_ctl, SLAVE_CLK_CTL, 1, 4, 0);
-DEFINE_QNODE(qhs_compute_dsp_cfg, SLAVE_CDSP_CFG, 1, 4, 0);
-DEFINE_QNODE(qhs_cpr_cx, SLAVE_RBCPR_CX_CFG, 1, 4, 0);
-DEFINE_QNODE(qhs_crypto0_cfg, SLAVE_CRYPTO_0_CFG, 1, 4, 0);
-DEFINE_QNODE(qhs_dcc_cfg, SLAVE_DCC_CFG, 1, 4, 1, MASTER_CNOC_DC_NOC);
-DEFINE_QNODE(qhs_ddrss_cfg, SLAVE_CNOC_DDRSS, 1, 4, 0);
-DEFINE_QNODE(qhs_display_cfg, SLAVE_DISPLAY_CFG, 1, 4, 0);
-DEFINE_QNODE(qhs_glm, SLAVE_GLM, 1, 4, 0);
-DEFINE_QNODE(qhs_gpuss_cfg, SLAVE_GFX3D_CFG, 1, 8, 0);
-DEFINE_QNODE(qhs_imem_cfg, SLAVE_IMEM_CFG, 1, 4, 0);
-DEFINE_QNODE(qhs_ipa, SLAVE_IPA_CFG, 1, 4, 0);
-DEFINE_QNODE(qhs_mnoc_cfg, SLAVE_CNOC_MNOC_CFG, 1, 4, 1, MASTER_CNOC_MNOC_CFG);
-DEFINE_QNODE(qhs_pcie0_cfg, SLAVE_PCIE_0_CFG, 1, 4, 0);
-DEFINE_QNODE(qhs_pcie_gen3_cfg, SLAVE_PCIE_1_CFG, 1, 4, 0);
-DEFINE_QNODE(qhs_pdm, SLAVE_PDM, 1, 4, 0);
-DEFINE_QNODE(qhs_phy_refgen_south, SLAVE_SOUTH_PHY_CFG, 1, 4, 0);
-DEFINE_QNODE(qhs_pimem_cfg, SLAVE_PIMEM_CFG, 1, 4, 0);
-DEFINE_QNODE(qhs_prng, SLAVE_PRNG, 1, 4, 0);
-DEFINE_QNODE(qhs_qdss_cfg, SLAVE_QDSS_CFG, 1, 4, 0);
-DEFINE_QNODE(qhs_qupv3_north, SLAVE_BLSP_2, 1, 4, 0);
-DEFINE_QNODE(qhs_qupv3_south, SLAVE_BLSP_1, 1, 4, 0);
-DEFINE_QNODE(qhs_sdc2, SLAVE_SDCC_2, 1, 4, 0);
-DEFINE_QNODE(qhs_sdc4, SLAVE_SDCC_4, 1, 4, 0);
-DEFINE_QNODE(qhs_snoc_cfg, SLAVE_SNOC_CFG, 1, 4, 1, MASTER_SNOC_CFG);
-DEFINE_QNODE(qhs_spdm, SLAVE_SPDM_WRAPPER, 1, 4, 0);
-DEFINE_QNODE(qhs_spss_cfg, SLAVE_SPSS_CFG, 1, 4, 0);
-DEFINE_QNODE(qhs_tcsr, SLAVE_TCSR, 1, 4, 0);
-DEFINE_QNODE(qhs_tlmm_north, SLAVE_TLMM_NORTH, 1, 4, 0);
-DEFINE_QNODE(qhs_tlmm_south, SLAVE_TLMM_SOUTH, 1, 4, 0);
-DEFINE_QNODE(qhs_tsif, SLAVE_TSIF, 1, 4, 0);
-DEFINE_QNODE(qhs_ufs_card_cfg, SLAVE_UFS_CARD_CFG, 1, 4, 0);
-DEFINE_QNODE(qhs_ufs_mem_cfg, SLAVE_UFS_MEM_CFG, 1, 4, 0);
-DEFINE_QNODE(qhs_usb3_0, SLAVE_USB3_0, 1, 4, 0);
-DEFINE_QNODE(qhs_usb3_1, SLAVE_USB3_1, 1, 4, 0);
-DEFINE_QNODE(qhs_venus_cfg, SLAVE_VENUS_CFG, 1, 4, 0);
-DEFINE_QNODE(qhs_vsense_ctrl_cfg, SLAVE_VSENSE_CTRL_CFG, 1, 4, 0);
-DEFINE_QNODE(qns_cnoc_a2noc, SLAVE_CNOC_A2NOC, 1, 8, 1, MASTER_CNOC_A2NOC);
-DEFINE_QNODE(srvc_cnoc, SLAVE_SERVICE_CNOC, 1, 4, 0);
-DEFINE_QNODE(qhs_llcc, SLAVE_LLCC_CFG, 1, 4, 0);
-DEFINE_QNODE(qhs_memnoc, SLAVE_MEM_NOC_CFG, 1, 4, 1, MASTER_MEM_NOC_CFG);
-DEFINE_QNODE(qns_gladiator_sodv, SLAVE_GNOC_SNOC, 1, 8, 1, MASTER_GNOC_SNOC);
-DEFINE_QNODE(qns_gnoc_memnoc, SLAVE_GNOC_MEM_NOC, 2, 32, 1, MASTER_GNOC_MEM_NOC);
-DEFINE_QNODE(srvc_gnoc, SLAVE_SERVICE_GNOC, 1, 4, 0);
-DEFINE_QNODE(ebi, SLAVE_EBI1, 4, 4, 0);
-DEFINE_QNODE(qhs_mdsp_ms_mpu_cfg, SLAVE_MSS_PROC_MS_MPU_CFG, 1, 4, 0);
-DEFINE_QNODE(qns_apps_io, SLAVE_MEM_NOC_GNOC, 1, 32, 0);
-DEFINE_QNODE(qns_llcc, SLAVE_LLCC, 4, 16, 1, MASTER_LLCC);
-DEFINE_QNODE(qns_memnoc_snoc, SLAVE_MEM_NOC_SNOC, 1, 8, 1, MASTER_MEM_NOC_SNOC);
-DEFINE_QNODE(srvc_memnoc, SLAVE_SERVICE_MEM_NOC, 1, 4, 0);
-DEFINE_QNODE(qns2_mem_noc, SLAVE_MNOC_SF_MEM_NOC, 1, 32, 1, MASTER_MNOC_SF_MEM_NOC);
-DEFINE_QNODE(qns_mem_noc_hf, SLAVE_MNOC_HF_MEM_NOC, 2, 32, 1, MASTER_MNOC_HF_MEM_NOC);
-DEFINE_QNODE(srvc_mnoc, SLAVE_SERVICE_MNOC, 1, 4, 0);
-DEFINE_QNODE(qhs_apss, SLAVE_APPSS, 1, 8, 0);
-DEFINE_QNODE(qns_cnoc, SLAVE_SNOC_CNOC, 1, 8, 1, MASTER_SNOC_CNOC);
-DEFINE_QNODE(qns_memnoc_gc, SLAVE_SNOC_MEM_NOC_GC, 1, 8, 1, MASTER_SNOC_GC_MEM_NOC);
-DEFINE_QNODE(qns_memnoc_sf, SLAVE_SNOC_MEM_NOC_SF, 1, 16, 1, MASTER_SNOC_SF_MEM_NOC);
-DEFINE_QNODE(qxs_imem, SLAVE_IMEM, 1, 8, 0);
-DEFINE_QNODE(qxs_pcie, SLAVE_PCIE_0, 1, 8, 0);
-DEFINE_QNODE(qxs_pcie_gen3, SLAVE_PCIE_1, 1, 8, 0);
-DEFINE_QNODE(qxs_pimem, SLAVE_PIMEM, 1, 8, 0);
-DEFINE_QNODE(srvc_snoc, SLAVE_SERVICE_SNOC, 1, 4, 0);
-DEFINE_QNODE(xs_qdss_stm, SLAVE_QDSS_STM, 1, 4, 0);
-DEFINE_QNODE(xs_sys_tcu_cfg, SLAVE_TCU, 1, 8, 0);
-
-#define DEFINE_QBCM(_name, _bcmname, _keepalive, _numnodes, ...)	\
-		static struct qcom_icc_bcm _name = {			\
-		.name = _bcmname,					\
-		.keepalive = _keepalive,				\
-		.num_nodes = _numnodes,					\
-		.nodes = { __VA_ARGS__ },				\
-	}
-
-DEFINE_QBCM(bcm_acv, "ACV", false, 1, &ebi);
-DEFINE_QBCM(bcm_mc0, "MC0", true, 1, &ebi);
-DEFINE_QBCM(bcm_sh0, "SH0", true, 1, &qns_llcc);
-DEFINE_QBCM(bcm_mm0, "MM0", false, 1, &qns_mem_noc_hf);
-DEFINE_QBCM(bcm_sh1, "SH1", false, 1, &qns_apps_io);
-DEFINE_QBCM(bcm_mm1, "MM1", false, 7, &qxm_camnoc_hf0_uncomp, &qxm_camnoc_hf1_uncomp, &qxm_camnoc_sf_uncomp, &qxm_camnoc_hf0, &qxm_camnoc_hf1, &qxm_mdp0, &qxm_mdp1);
-DEFINE_QBCM(bcm_sh2, "SH2", false, 1, &qns_memnoc_snoc);
-DEFINE_QBCM(bcm_mm2, "MM2", false, 1, &qns2_mem_noc);
-DEFINE_QBCM(bcm_sh3, "SH3", false, 1, &acm_tcu);
-DEFINE_QBCM(bcm_mm3, "MM3", false, 5, &qxm_camnoc_sf, &qxm_rot, &qxm_venus0, &qxm_venus1, &qxm_venus_arm9);
-DEFINE_QBCM(bcm_sh5, "SH5", false, 1, &qnm_apps);
-DEFINE_QBCM(bcm_sn0, "SN0", true, 1, &qns_memnoc_sf);
-DEFINE_QBCM(bcm_ce0, "CE0", false, 1, &qxm_crypto);
-DEFINE_QBCM(bcm_cn0, "CN0", false, 47, &qhm_spdm, &qhm_tic, &qnm_snoc, &xm_qdss_dap, &qhs_a1_noc_cfg, &qhs_a2_noc_cfg, &qhs_aop, &qhs_aoss, &qhs_camera_cfg, &qhs_clk_ctl, &qhs_compute_dsp_cfg, &qhs_cpr_cx, &qhs_crypto0_cfg, &qhs_dcc_cfg, &qhs_ddrss_cfg, &qhs_display_cfg, &qhs_glm, &qhs_gpuss_cfg, &qhs_imem_cfg, &qhs_ipa, &qhs_mnoc_cfg, &qhs_pcie0_cfg, &qhs_pcie_gen3_cfg, &qhs_pdm, &qhs_phy_refgen_south, &qhs_pimem_cfg, &qhs_prng, &qhs_qdss_cfg, &qhs_qupv3_north, &qhs_qupv3_south, &qhs_sdc2, &qhs_sdc4, &qhs_snoc_cfg, &qhs_spdm, &qhs_spss_cfg, &qhs_tcsr, &qhs_tlmm_north, &qhs_tlmm_south, &qhs_tsif, &qhs_ufs_card_cfg, &qhs_ufs_mem_cfg, &qhs_usb3_0, &qhs_usb3_1, &qhs_venus_cfg, &qhs_vsense_ctrl_cfg, &qns_cnoc_a2noc, &srvc_cnoc);
-DEFINE_QBCM(bcm_qup0, "QUP0", false, 2, &qhm_qup1, &qhm_qup2);
-DEFINE_QBCM(bcm_sn1, "SN1", false, 1, &qxs_imem);
-DEFINE_QBCM(bcm_sn2, "SN2", false, 1, &qns_memnoc_gc);
-DEFINE_QBCM(bcm_sn3, "SN3", false, 1, &qns_cnoc);
-DEFINE_QBCM(bcm_sn4, "SN4", false, 1, &qxm_pimem);
-DEFINE_QBCM(bcm_sn5, "SN5", false, 1, &xs_qdss_stm);
-DEFINE_QBCM(bcm_sn6, "SN6", false, 3, &qhs_apss, &srvc_snoc, &xs_sys_tcu_cfg);
-DEFINE_QBCM(bcm_sn7, "SN7", false, 1, &qxs_pcie);
-DEFINE_QBCM(bcm_sn8, "SN8", false, 1, &qxs_pcie_gen3);
-DEFINE_QBCM(bcm_sn9, "SN9", false, 2, &srvc_aggre1_noc, &qnm_aggre1_noc);
-DEFINE_QBCM(bcm_sn11, "SN11", false, 2, &srvc_aggre2_noc, &qnm_aggre2_noc);
-DEFINE_QBCM(bcm_sn12, "SN12", false, 2, &qnm_gladiator_sodv, &xm_gic);
-DEFINE_QBCM(bcm_sn14, "SN14", false, 1, &qnm_pcie_anoc);
-DEFINE_QBCM(bcm_sn15, "SN15", false, 1, &qnm_memnoc);
-
-static struct qcom_icc_node *rsc_hlos_nodes[] = {
-	[MASTER_APPSS_PROC] = &acm_l3,
-	[MASTER_TCU_0] = &acm_tcu,
-	[MASTER_LLCC] = &llcc_mc,
-	[MASTER_GNOC_CFG] = &pm_gnoc_cfg,
+static struct qcom_icc_node *aggre1_noc_nodes[] = {
 	[MASTER_A1NOC_CFG] = &qhm_a1noc_cfg,
-	[MASTER_A2NOC_CFG] = &qhm_a2noc_cfg,
-	[MASTER_CNOC_DC_NOC] = &qhm_cnoc,
-	[MASTER_MEM_NOC_CFG] = &qhm_memnoc_cfg,
-	[MASTER_CNOC_MNOC_CFG] = &qhm_mnoc_cfg,
-	[MASTER_QDSS_BAM] = &qhm_qdss_bam,
-	[MASTER_BLSP_1] = &qhm_qup1,
-	[MASTER_BLSP_2] = &qhm_qup2,
-	[MASTER_SNOC_CFG] = &qhm_snoc_cfg,
-	[MASTER_SPDM] = &qhm_spdm,
-	[MASTER_TIC] = &qhm_tic,
 	[MASTER_TSIF] = &qhm_tsif,
-	[MASTER_A1NOC_SNOC] = &qnm_aggre1_noc,
-	[MASTER_A2NOC_SNOC] = &qnm_aggre2_noc,
-	[MASTER_GNOC_MEM_NOC] = &qnm_apps,
-	[MASTER_CNOC_A2NOC] = &qnm_cnoc,
-	[MASTER_GNOC_SNOC] = &qnm_gladiator_sodv,
-	[MASTER_MEM_NOC_SNOC] = &qnm_memnoc,
-	[MASTER_MNOC_HF_MEM_NOC] = &qnm_mnoc_hf,
-	[MASTER_MNOC_SF_MEM_NOC] = &qnm_mnoc_sf,
-	[MASTER_ANOC_PCIE_SNOC] = &qnm_pcie_anoc,
-	[MASTER_SNOC_CNOC] = &qnm_snoc,
-	[MASTER_SNOC_GC_MEM_NOC] = &qnm_snoc_gc,
-	[MASTER_SNOC_SF_MEM_NOC] = &qnm_snoc_sf,
-	[MASTER_CAMNOC_HF0] = &qxm_camnoc_hf0,
-	[MASTER_CAMNOC_HF0_UNCOMP] = &qxm_camnoc_hf0_uncomp,
-	[MASTER_CAMNOC_HF1] = &qxm_camnoc_hf1,
-	[MASTER_CAMNOC_HF1_UNCOMP] = &qxm_camnoc_hf1_uncomp,
-	[MASTER_CAMNOC_SF] = &qxm_camnoc_sf,
-	[MASTER_CAMNOC_SF_UNCOMP] = &qxm_camnoc_sf_uncomp,
-	[MASTER_CRYPTO] = &qxm_crypto,
-	[MASTER_GFX3D] = &qxm_gpu,
-	[MASTER_IPA] = &qxm_ipa,
-	[MASTER_MDP0] = &qxm_mdp0,
-	[MASTER_MDP1] = &qxm_mdp1,
-	[MASTER_PIMEM] = &qxm_pimem,
-	[MASTER_ROTATOR] = &qxm_rot,
-	[MASTER_VIDEO_P0] = &qxm_venus0,
-	[MASTER_VIDEO_P1] = &qxm_venus1,
-	[MASTER_VIDEO_PROC] = &qxm_venus_arm9,
-	[MASTER_GIC] = &xm_gic,
-	[MASTER_PCIE_1] = &xm_pcie3_1,
-	[MASTER_PCIE_0] = &xm_pcie_0,
-	[MASTER_QDSS_DAP] = &xm_qdss_dap,
-	[MASTER_QDSS_ETR] = &xm_qdss_etr,
 	[MASTER_SDCC_2] = &xm_sdc2,
 	[MASTER_SDCC_4] = &xm_sdc4,
 	[MASTER_UFS_CARD] = &xm_ufs_card,
 	[MASTER_UFS_MEM] = &xm_ufs_mem,
+	[MASTER_PCIE_0] = &xm_pcie_0,
+	[SLAVE_A1NOC_SNOC] = &qns_a1noc_snoc,
+	[SLAVE_SERVICE_A1NOC] = &srvc_aggre1_noc,
+	[SLAVE_ANOC_PCIE_A1NOC_SNOC] = &qns_pcie_a1noc_snoc,
+};
+
+const static struct qcom_icc_desc sdm845_aggre1_noc = {
+	.nodes = aggre1_noc_nodes,
+	.num_nodes = ARRAY_SIZE(aggre1_noc_nodes),
+	.bcms = aggre1_noc_bcms,
+	.num_bcms = ARRAY_SIZE(aggre1_noc_bcms),
+};
+
+static struct qcom_icc_bcm *aggre2_noc_bcms[] = {
+	&bcm_ce0,
+	&bcm_sn11,
+	&bcm_qup0,
+};
+
+static struct qcom_icc_node *aggre2_noc_nodes[] = {
+	[MASTER_A2NOC_CFG] = &qhm_a2noc_cfg,
+	[MASTER_QDSS_BAM] = &qhm_qdss_bam,
+	[MASTER_CNOC_A2NOC] = &qnm_cnoc,
+	[MASTER_CRYPTO] = &qxm_crypto,
+	[MASTER_IPA] = &qxm_ipa,
+	[MASTER_PCIE_1] = &xm_pcie3_1,
+	[MASTER_QDSS_ETR] = &xm_qdss_etr,
 	[MASTER_USB3_0] = &xm_usb3_0,
 	[MASTER_USB3_1] = &xm_usb3_1,
-	[SLAVE_EBI1] = &ebi,
+	[SLAVE_A2NOC_SNOC] = &qns_a2noc_snoc,
+	[SLAVE_ANOC_PCIE_SNOC] = &qns_pcie_snoc,
+	[SLAVE_SERVICE_A2NOC] = &srvc_aggre2_noc,
+};
+
+const static struct qcom_icc_desc sdm845_aggre2_noc = {
+	.nodes = aggre2_noc_nodes,
+	.num_nodes = ARRAY_SIZE(aggre2_noc_nodes),
+	.bcms = aggre2_noc_bcms,
+	.num_bcms = ARRAY_SIZE(aggre2_noc_bcms),
+};
+
+static struct qcom_icc_bcm *config_noc_bcms[] = {
+	&bcm_cn0,
+};
+
+static struct qcom_icc_node *config_noc_nodes[] = {
+	[MASTER_SPDM] = &qhm_spdm,
+	[MASTER_TIC] = &qhm_tic,
+	[MASTER_SNOC_CNOC] = &qnm_snoc,
+	[MASTER_QDSS_DAP] = &xm_qdss_dap,
 	[SLAVE_A1NOC_CFG] = &qhs_a1_noc_cfg,
 	[SLAVE_A2NOC_CFG] = &qhs_a2_noc_cfg,
 	[SLAVE_AOP] = &qhs_aop,
 	[SLAVE_AOSS] = &qhs_aoss,
-	[SLAVE_APPSS] = &qhs_apss,
 	[SLAVE_CAMERA_CFG] = &qhs_camera_cfg,
 	[SLAVE_CLK_CTL] = &qhs_clk_ctl,
 	[SLAVE_CDSP_CFG] = &qhs_compute_dsp_cfg,
@@ -386,9 +252,6 @@ static struct qcom_icc_node *rsc_hlos_nodes[] = {
 	[SLAVE_GFX3D_CFG] = &qhs_gpuss_cfg,
 	[SLAVE_IMEM_CFG] = &qhs_imem_cfg,
 	[SLAVE_IPA_CFG] = &qhs_ipa,
-	[SLAVE_LLCC_CFG] = &qhs_llcc,
-	[SLAVE_MSS_PROC_MS_MPU_CFG] = &qhs_mdsp_ms_mpu_cfg,
-	[SLAVE_MEM_NOC_CFG] = &qhs_memnoc,
 	[SLAVE_CNOC_MNOC_CFG] = &qhs_mnoc_cfg,
 	[SLAVE_PCIE_0_CFG] = &qhs_pcie0_cfg,
 	[SLAVE_PCIE_1_CFG] = &qhs_pcie_gen3_cfg,
@@ -414,53 +277,122 @@ static struct qcom_icc_node *rsc_hlos_nodes[] = {
 	[SLAVE_USB3_1] = &qhs_usb3_1,
 	[SLAVE_VENUS_CFG] = &qhs_venus_cfg,
 	[SLAVE_VSENSE_CTRL_CFG] = &qhs_vsense_ctrl_cfg,
-	[SLAVE_MNOC_SF_MEM_NOC] = &qns2_mem_noc,
-	[SLAVE_A1NOC_SNOC] = &qns_a1noc_snoc,
-	[SLAVE_A2NOC_SNOC] = &qns_a2noc_snoc,
-	[SLAVE_MEM_NOC_GNOC] = &qns_apps_io,
-	[SLAVE_CAMNOC_UNCOMP] = &qns_camnoc_uncomp,
-	[SLAVE_SNOC_CNOC] = &qns_cnoc,
 	[SLAVE_CNOC_A2NOC] = &qns_cnoc_a2noc,
-	[SLAVE_GNOC_SNOC] = &qns_gladiator_sodv,
-	[SLAVE_GNOC_MEM_NOC] = &qns_gnoc_memnoc,
-	[SLAVE_LLCC] = &qns_llcc,
-	[SLAVE_MNOC_HF_MEM_NOC] = &qns_mem_noc_hf,
-	[SLAVE_SNOC_MEM_NOC_GC] = &qns_memnoc_gc,
-	[SLAVE_SNOC_MEM_NOC_SF] = &qns_memnoc_sf,
-	[SLAVE_MEM_NOC_SNOC] = &qns_memnoc_snoc,
-	[SLAVE_ANOC_PCIE_A1NOC_SNOC] = &qns_pcie_a1noc_snoc,
-	[SLAVE_ANOC_PCIE_SNOC] = &qns_pcie_snoc,
-	[SLAVE_IMEM] = &qxs_imem,
-	[SLAVE_PCIE_0] = &qxs_pcie,
-	[SLAVE_PCIE_1] = &qxs_pcie_gen3,
-	[SLAVE_PIMEM] = &qxs_pimem,
-	[SLAVE_SERVICE_A1NOC] = &srvc_aggre1_noc,
-	[SLAVE_SERVICE_A2NOC] = &srvc_aggre2_noc,
 	[SLAVE_SERVICE_CNOC] = &srvc_cnoc,
-	[SLAVE_SERVICE_GNOC] = &srvc_gnoc,
-	[SLAVE_SERVICE_MEM_NOC] = &srvc_memnoc,
-	[SLAVE_SERVICE_MNOC] = &srvc_mnoc,
-	[SLAVE_SERVICE_SNOC] = &srvc_snoc,
-	[SLAVE_QDSS_STM] = &xs_qdss_stm,
-	[SLAVE_TCU] = &xs_sys_tcu_cfg,
 };
 
-static struct qcom_icc_bcm *rsc_hlos_bcms[] = {
-	&bcm_acv,
+const static struct qcom_icc_desc sdm845_config_noc = {
+	.nodes = config_noc_nodes,
+	.num_nodes = ARRAY_SIZE(config_noc_nodes),
+	.bcms = config_noc_bcms,
+	.num_bcms = ARRAY_SIZE(config_noc_bcms),
+};
+
+static struct qcom_icc_bcm *dc_noc_bcms[] = {
+};
+
+static struct qcom_icc_node *dc_noc_nodes[] = {
+	[MASTER_CNOC_DC_NOC] = &qhm_cnoc,
+	[SLAVE_LLCC_CFG] = &qhs_llcc,
+	[SLAVE_MEM_NOC_CFG] = &qhs_memnoc,
+};
+
+const static struct qcom_icc_desc sdm845_dc_noc = {
+	.nodes = dc_noc_nodes,
+	.num_nodes = ARRAY_SIZE(dc_noc_nodes),
+	.bcms = dc_noc_bcms,
+	.num_bcms = ARRAY_SIZE(dc_noc_bcms),
+};
+
+static struct qcom_icc_bcm *gladiator_noc_bcms[] = {
+};
+
+static struct qcom_icc_node *gladiator_noc_nodes[] = {
+	[MASTER_APPSS_PROC] = &acm_l3,
+	[MASTER_GNOC_CFG] = &pm_gnoc_cfg,
+	[SLAVE_GNOC_SNOC] = &qns_gladiator_sodv,
+	[SLAVE_GNOC_MEM_NOC] = &qns_gnoc_memnoc,
+	[SLAVE_SERVICE_GNOC] = &srvc_gnoc,
+};
+
+const static struct qcom_icc_desc sdm845_gladiator_noc = {
+	.nodes = gladiator_noc_nodes,
+	.num_nodes = ARRAY_SIZE(gladiator_noc_nodes),
+	.bcms = gladiator_noc_bcms,
+	.num_bcms = ARRAY_SIZE(gladiator_noc_bcms),
+};
+
+static struct qcom_icc_bcm *mem_noc_bcms[] = {
 	&bcm_mc0,
+	&bcm_acv,
 	&bcm_sh0,
-	&bcm_mm0,
 	&bcm_sh1,
-	&bcm_mm1,
 	&bcm_sh2,
-	&bcm_mm2,
 	&bcm_sh3,
-	&bcm_mm3,
 	&bcm_sh5,
+};
+
+static struct qcom_icc_node *mem_noc_nodes[] = {
+	[MASTER_TCU_0] = &acm_tcu,
+	[MASTER_MEM_NOC_CFG] = &qhm_memnoc_cfg,
+	[MASTER_GNOC_MEM_NOC] = &qnm_apps,
+	[MASTER_MNOC_HF_MEM_NOC] = &qnm_mnoc_hf,
+	[MASTER_MNOC_SF_MEM_NOC] = &qnm_mnoc_sf,
+	[MASTER_SNOC_GC_MEM_NOC] = &qnm_snoc_gc,
+	[MASTER_SNOC_SF_MEM_NOC] = &qnm_snoc_sf,
+	[MASTER_GFX3D] = &qxm_gpu,
+	[SLAVE_MSS_PROC_MS_MPU_CFG] = &qhs_mdsp_ms_mpu_cfg,
+	[SLAVE_MEM_NOC_GNOC] = &qns_apps_io,
+	[SLAVE_LLCC] = &qns_llcc,
+	[SLAVE_MEM_NOC_SNOC] = &qns_memnoc_snoc,
+	[SLAVE_SERVICE_MEM_NOC] = &srvc_memnoc,
+	[MASTER_LLCC] = &llcc_mc,
+	[SLAVE_EBI1] = &ebi,
+};
+
+const static struct qcom_icc_desc sdm845_mem_noc = {
+	.nodes = mem_noc_nodes,
+	.num_nodes = ARRAY_SIZE(mem_noc_nodes),
+	.bcms = mem_noc_bcms,
+	.num_bcms = ARRAY_SIZE(mem_noc_bcms),
+};
+
+static struct qcom_icc_bcm *mmss_noc_bcms[] = {
+	&bcm_mm0,
+	&bcm_mm1,
+	&bcm_mm2,
+	&bcm_mm3,
+};
+
+static struct qcom_icc_node *mmss_noc_nodes[] = {
+	[MASTER_CNOC_MNOC_CFG] = &qhm_mnoc_cfg,
+	[MASTER_CAMNOC_HF0] = &qxm_camnoc_hf0,
+	[MASTER_CAMNOC_HF1] = &qxm_camnoc_hf1,
+	[MASTER_CAMNOC_SF] = &qxm_camnoc_sf,
+	[MASTER_MDP0] = &qxm_mdp0,
+	[MASTER_MDP1] = &qxm_mdp1,
+	[MASTER_ROTATOR] = &qxm_rot,
+	[MASTER_VIDEO_P0] = &qxm_venus0,
+	[MASTER_VIDEO_P1] = &qxm_venus1,
+	[MASTER_VIDEO_PROC] = &qxm_venus_arm9,
+	[SLAVE_MNOC_SF_MEM_NOC] = &qns2_mem_noc,
+	[SLAVE_MNOC_HF_MEM_NOC] = &qns_mem_noc_hf,
+	[SLAVE_SERVICE_MNOC] = &srvc_mnoc,
+	[MASTER_CAMNOC_HF0_UNCOMP] = &qxm_camnoc_hf0_uncomp,
+	[MASTER_CAMNOC_HF1_UNCOMP] = &qxm_camnoc_hf1_uncomp,
+	[MASTER_CAMNOC_SF_UNCOMP] = &qxm_camnoc_sf_uncomp,
+	[SLAVE_CAMNOC_UNCOMP] = &qns_camnoc_uncomp,
+};
+
+const static struct qcom_icc_desc sdm845_mmss_noc = {
+	.nodes = mmss_noc_nodes,
+	.num_nodes = ARRAY_SIZE(mmss_noc_nodes),
+	.bcms = mmss_noc_bcms,
+	.num_bcms = ARRAY_SIZE(mmss_noc_bcms),
+};
+
+static struct qcom_icc_bcm *system_noc_bcms[] = {
 	&bcm_sn0,
-	&bcm_ce0,
-	&bcm_cn0,
-	&bcm_qup0,
 	&bcm_sn1,
 	&bcm_sn2,
 	&bcm_sn3,
@@ -476,297 +408,34 @@ static struct qcom_icc_bcm *rsc_hlos_bcms[] = {
 	&bcm_sn15,
 };
 
-static struct qcom_icc_desc sdm845_rsc_hlos = {
-	.nodes = rsc_hlos_nodes,
-	.num_nodes = ARRAY_SIZE(rsc_hlos_nodes),
-	.bcms = rsc_hlos_bcms,
-	.num_bcms = ARRAY_SIZE(rsc_hlos_bcms),
+static struct qcom_icc_node *system_noc_nodes[] = {
+	[MASTER_SNOC_CFG] = &qhm_snoc_cfg,
+	[MASTER_A1NOC_SNOC] = &qnm_aggre1_noc,
+	[MASTER_A2NOC_SNOC] = &qnm_aggre2_noc,
+	[MASTER_GNOC_SNOC] = &qnm_gladiator_sodv,
+	[MASTER_MEM_NOC_SNOC] = &qnm_memnoc,
+	[MASTER_ANOC_PCIE_SNOC] = &qnm_pcie_anoc,
+	[MASTER_PIMEM] = &qxm_pimem,
+	[MASTER_GIC] = &xm_gic,
+	[SLAVE_APPSS] = &qhs_apss,
+	[SLAVE_SNOC_CNOC] = &qns_cnoc,
+	[SLAVE_SNOC_MEM_NOC_GC] = &qns_memnoc_gc,
+	[SLAVE_SNOC_MEM_NOC_SF] = &qns_memnoc_sf,
+	[SLAVE_IMEM] = &qxs_imem,
+	[SLAVE_PCIE_0] = &qxs_pcie,
+	[SLAVE_PCIE_1] = &qxs_pcie_gen3,
+	[SLAVE_PIMEM] = &qxs_pimem,
+	[SLAVE_SERVICE_SNOC] = &srvc_snoc,
+	[SLAVE_QDSS_STM] = &xs_qdss_stm,
+	[SLAVE_TCU] = &xs_sys_tcu_cfg,
 };
 
-static int qcom_icc_bcm_init(struct qcom_icc_bcm *bcm, struct device *dev)
-{
-	struct qcom_icc_node *qn;
-	const struct bcm_db *data;
-	size_t data_count;
-	int i;
-
-	bcm->addr = cmd_db_read_addr(bcm->name);
-	if (!bcm->addr) {
-		dev_err(dev, "%s could not find RPMh address\n",
-			bcm->name);
-		return -EINVAL;
-	}
-
-	data = cmd_db_read_aux_data(bcm->name, &data_count);
-	if (IS_ERR(data)) {
-		dev_err(dev, "%s command db read error (%ld)\n",
-			bcm->name, PTR_ERR(data));
-		return PTR_ERR(data);
-	}
-	if (!data_count) {
-		dev_err(dev, "%s command db missing or partial aux data\n",
-			bcm->name);
-		return -EINVAL;
-	}
-
-	bcm->aux_data.unit = le32_to_cpu(data->unit);
-	bcm->aux_data.width = le16_to_cpu(data->width);
-	bcm->aux_data.vcd = data->vcd;
-	bcm->aux_data.reserved = data->reserved;
-
-	/*
-	 * Link Qnodes to their respective BCMs
-	 */
-	for (i = 0; i < bcm->num_nodes; i++) {
-		qn = bcm->nodes[i];
-		qn->bcms[qn->num_bcms] = bcm;
-		qn->num_bcms++;
-	}
-
-	return 0;
-}
-
-inline void tcs_cmd_gen(struct tcs_cmd *cmd, u64 vote_x, u64 vote_y,
-			u32 addr, bool commit)
-{
-	bool valid = true;
-
-	if (!cmd)
-		return;
-
-	if (vote_x == 0 && vote_y == 0)
-		valid = false;
-
-	if (vote_x > BCM_TCS_CMD_VOTE_MASK)
-		vote_x = BCM_TCS_CMD_VOTE_MASK;
-
-	if (vote_y > BCM_TCS_CMD_VOTE_MASK)
-		vote_y = BCM_TCS_CMD_VOTE_MASK;
-
-	cmd->addr = addr;
-	cmd->data = BCM_TCS_CMD(commit, valid, vote_x, vote_y);
-
-	/*
-	 * Set the wait for completion flag on command that need to be completed
-	 * before the next command.
-	 */
-	if (commit)
-		cmd->wait = true;
-}
-
-static void tcs_list_gen(struct list_head *bcm_list, int bucket,
-			 struct tcs_cmd tcs_list[SDM845_MAX_VCD],
-			 int n[SDM845_MAX_VCD])
-{
-	struct qcom_icc_bcm *bcm;
-	bool commit;
-	size_t idx = 0, batch = 0, cur_vcd_size = 0;
-
-	memset(n, 0, sizeof(int) * SDM845_MAX_VCD);
-
-	list_for_each_entry(bcm, bcm_list, list) {
-		commit = false;
-		cur_vcd_size++;
-		if ((list_is_last(&bcm->list, bcm_list)) ||
-		    bcm->aux_data.vcd != list_next_entry(bcm, list)->aux_data.vcd) {
-			commit = true;
-			cur_vcd_size = 0;
-		}
-		tcs_cmd_gen(&tcs_list[idx], bcm->vote_x[bucket],
-			    bcm->vote_y[bucket], bcm->addr, commit);
-		idx++;
-		n[batch]++;
-		/*
-		 * Batch the BCMs in such a way that we do not split them in
-		 * multiple payloads when they are under the same VCD. This is
-		 * to ensure that every BCM is committed since we only set the
-		 * commit bit on the last BCM request of every VCD.
-		 */
-		if (n[batch] >= MAX_RPMH_PAYLOAD) {
-			if (!commit) {
-				n[batch] -= cur_vcd_size;
-				n[batch + 1] = cur_vcd_size;
-			}
-			batch++;
-		}
-	}
-}
-
-static void bcm_aggregate(struct qcom_icc_bcm *bcm)
-{
-	size_t i, bucket;
-	u64 agg_avg[QCOM_ICC_NUM_BUCKETS] = {0};
-	u64 agg_peak[QCOM_ICC_NUM_BUCKETS] = {0};
-	u64 temp;
-
-	for (bucket = 0; bucket < QCOM_ICC_NUM_BUCKETS; bucket++) {
-		for (i = 0; i < bcm->num_nodes; i++) {
-			temp = bcm->nodes[i]->sum_avg[bucket] * bcm->aux_data.width;
-			do_div(temp, bcm->nodes[i]->buswidth * bcm->nodes[i]->channels);
-			agg_avg[bucket] = max(agg_avg[bucket], temp);
-
-			temp = bcm->nodes[i]->max_peak[bucket] * bcm->aux_data.width;
-			do_div(temp, bcm->nodes[i]->buswidth);
-			agg_peak[bucket] = max(agg_peak[bucket], temp);
-		}
-
-		temp = agg_avg[bucket] * 1000ULL;
-		do_div(temp, bcm->aux_data.unit);
-		bcm->vote_x[bucket] = temp;
-
-		temp = agg_peak[bucket] * 1000ULL;
-		do_div(temp, bcm->aux_data.unit);
-		bcm->vote_y[bucket] = temp;
-	}
-
-	if (bcm->keepalive && bcm->vote_x[QCOM_ICC_BUCKET_AMC] == 0 &&
-	    bcm->vote_y[QCOM_ICC_BUCKET_AMC] == 0) {
-		bcm->vote_x[QCOM_ICC_BUCKET_AMC] = 1;
-		bcm->vote_x[QCOM_ICC_BUCKET_WAKE] = 1;
-		bcm->vote_y[QCOM_ICC_BUCKET_AMC] = 1;
-		bcm->vote_y[QCOM_ICC_BUCKET_WAKE] = 1;
-	}
-
-	bcm->dirty = false;
-}
-
-static void qcom_icc_pre_aggregate(struct icc_node *node)
-{
-	size_t i;
-	struct qcom_icc_node *qn;
-
-	qn = node->data;
-
-	for (i = 0; i < QCOM_ICC_NUM_BUCKETS; i++) {
-		qn->sum_avg[i] = 0;
-		qn->max_peak[i] = 0;
-	}
-}
-
-static int qcom_icc_aggregate(struct icc_node *node, u32 tag, u32 avg_bw,
-			      u32 peak_bw, u32 *agg_avg, u32 *agg_peak)
-{
-	size_t i;
-	struct qcom_icc_node *qn;
-
-	qn = node->data;
-
-	if (!tag)
-		tag = QCOM_ICC_TAG_ALWAYS;
-
-	for (i = 0; i < QCOM_ICC_NUM_BUCKETS; i++) {
-		if (tag & BIT(i)) {
-			qn->sum_avg[i] += avg_bw;
-			qn->max_peak[i] = max_t(u32, qn->max_peak[i], peak_bw);
-		}
-	}
-
-	*agg_avg += avg_bw;
-	*agg_peak = max_t(u32, *agg_peak, peak_bw);
-
-	for (i = 0; i < qn->num_bcms; i++)
-		qn->bcms[i]->dirty = true;
-
-	return 0;
-}
-
-static int qcom_icc_set(struct icc_node *src, struct icc_node *dst)
-{
-	struct qcom_icc_provider *qp;
-	struct icc_node *node;
-	struct tcs_cmd cmds[SDM845_MAX_BCMS];
-	struct list_head commit_list;
-	int commit_idx[SDM845_MAX_VCD];
-	int ret = 0, i;
-
-	if (!src)
-		node = dst;
-	else
-		node = src;
-
-	qp = to_qcom_provider(node->provider);
-
-	INIT_LIST_HEAD(&commit_list);
-
-	for (i = 0; i < qp->num_bcms; i++) {
-		if (qp->bcms[i]->dirty) {
-			bcm_aggregate(qp->bcms[i]);
-			list_add_tail(&qp->bcms[i]->list, &commit_list);
-		}
-	}
-
-	/*
-	 * Construct the command list based on a pre ordered list of BCMs
-	 * based on VCD.
-	 */
-	tcs_list_gen(&commit_list, QCOM_ICC_BUCKET_AMC, cmds, commit_idx);
-
-	if (!commit_idx[0])
-		return ret;
-
-	ret = rpmh_invalidate(qp->dev);
-	if (ret) {
-		pr_err("Error invalidating RPMH client (%d)\n", ret);
-		return ret;
-	}
-
-	ret = rpmh_write_batch(qp->dev, RPMH_ACTIVE_ONLY_STATE,
-			       cmds, commit_idx);
-	if (ret) {
-		pr_err("Error sending AMC RPMH requests (%d)\n", ret);
-		return ret;
-	}
-
-	INIT_LIST_HEAD(&commit_list);
-
-	for (i = 0; i < qp->num_bcms; i++) {
-		/*
-		 * Only generate WAKE and SLEEP commands if a resource's
-		 * requirements change as the execution environment transitions
-		 * between different power states.
-		 */
-		if (qp->bcms[i]->vote_x[QCOM_ICC_BUCKET_WAKE] !=
-		    qp->bcms[i]->vote_x[QCOM_ICC_BUCKET_SLEEP] ||
-		    qp->bcms[i]->vote_y[QCOM_ICC_BUCKET_WAKE] !=
-		    qp->bcms[i]->vote_y[QCOM_ICC_BUCKET_SLEEP]) {
-			list_add_tail(&qp->bcms[i]->list, &commit_list);
-		}
-	}
-
-	if (list_empty(&commit_list))
-		return ret;
-
-	tcs_list_gen(&commit_list, QCOM_ICC_BUCKET_WAKE, cmds, commit_idx);
-
-	ret = rpmh_write_batch(qp->dev, RPMH_WAKE_ONLY_STATE, cmds, commit_idx);
-	if (ret) {
-		pr_err("Error sending WAKE RPMH requests (%d)\n", ret);
-		return ret;
-	}
-
-	tcs_list_gen(&commit_list, QCOM_ICC_BUCKET_SLEEP, cmds, commit_idx);
-
-	ret = rpmh_write_batch(qp->dev, RPMH_SLEEP_STATE, cmds, commit_idx);
-	if (ret) {
-		pr_err("Error sending SLEEP RPMH requests (%d)\n", ret);
-		return ret;
-	}
-
-	return ret;
-}
-
-static int cmp_vcd(const void *_l, const void *_r)
-{
-	const struct qcom_icc_bcm **l = (const struct qcom_icc_bcm **)_l;
-	const struct qcom_icc_bcm **r = (const struct qcom_icc_bcm **)_r;
-
-	if (l[0]->aux_data.vcd < r[0]->aux_data.vcd)
-		return -1;
-	else if (l[0]->aux_data.vcd == r[0]->aux_data.vcd)
-		return 0;
-	else
-		return 1;
-}
+const static struct qcom_icc_desc sdm845_system_noc = {
+	.nodes = system_noc_nodes,
+	.num_nodes = ARRAY_SIZE(system_noc_nodes),
+	.bcms = system_noc_bcms,
+	.num_bcms = ARRAY_SIZE(system_noc_bcms),
+};
 
 static int qnoc_probe(struct platform_device *pdev)
 {
@@ -779,7 +448,7 @@ static int qnoc_probe(struct platform_device *pdev)
 	size_t num_nodes, i;
 	int ret;
 
-	desc = of_device_get_match_data(&pdev->dev);
+	desc = device_get_match_data(&pdev->dev);
 	if (!desc)
 		return -EINVAL;
 
@@ -808,6 +477,12 @@ static int qnoc_probe(struct platform_device *pdev)
 	qp->bcms = desc->bcms;
 	qp->num_bcms = desc->num_bcms;
 
+	qp->voter = of_bcm_voter_get(qp->dev, NULL);
+	if (IS_ERR(qp->voter)) {
+		dev_err(&pdev->dev, "bcm_voter err:%ld\n", PTR_ERR(qp->voter));
+		return PTR_ERR(qp->voter);
+	}
+
 	ret = icc_provider_add(provider);
 	if (ret) {
 		dev_err(&pdev->dev, "error adding interconnect provider\n");
@@ -817,6 +492,9 @@ static int qnoc_probe(struct platform_device *pdev)
 	for (i = 0; i < num_nodes; i++) {
 		size_t j;
 
+		if (!qnodes[i])
+			continue;
+
 		node = icc_node_create(qnodes[i]->id);
 		if (IS_ERR(node)) {
 			ret = PTR_ERR(node);
@@ -827,10 +505,6 @@ static int qnoc_probe(struct platform_device *pdev)
 		node->data = qnodes[i];
 		icc_node_add(node, provider);
 
-		dev_dbg(&pdev->dev, "registered node %p %s %d\n", node,
-			qnodes[i]->name, node->id);
-
-		/* populate links */
 		for (j = 0; j < qnodes[i]->num_links; j++)
 			icc_link_create(node, qnodes[i]->links[j]);
 
@@ -841,19 +515,9 @@ static int qnoc_probe(struct platform_device *pdev)
 	for (i = 0; i < qp->num_bcms; i++)
 		qcom_icc_bcm_init(qp->bcms[i], &pdev->dev);
 
-	/*
-	 * Pre sort the BCMs based on VCD for ease of generating a command list
-	 * that groups the BCMs with the same VCD together. VCDs are numbered
-	 * with lowest being the most expensive time wise, ensuring that
-	 * those commands are being sent the earliest in the queue.
-	 */
-	sort(qp->bcms, qp->num_bcms, sizeof(*qp->bcms), cmp_vcd, NULL);
-
 	platform_set_drvdata(pdev, qp);
 
-	dev_dbg(&pdev->dev, "Registered SDM845 ICC\n");
-
-	return ret;
+	return 0;
 err:
 	icc_nodes_remove(provider);
 	icc_provider_del(provider);
@@ -869,8 +533,23 @@ static int qnoc_remove(struct platform_device *pdev)
 }
 
 static const struct of_device_id qnoc_of_match[] = {
-	{ .compatible = "qcom,sdm845-rsc-hlos", .data = &sdm845_rsc_hlos },
-	{ },
+	{ .compatible = "qcom,sdm845-aggre1-noc",
+	  .data = &sdm845_aggre1_noc},
+	{ .compatible = "qcom,sdm845-aggre2-noc",
+	  .data = &sdm845_aggre2_noc},
+	{ .compatible = "qcom,sdm845-config-noc",
+	  .data = &sdm845_config_noc},
+	{ .compatible = "qcom,sdm845-dc-noc",
+	  .data = &sdm845_dc_noc},
+	{ .compatible = "qcom,sdm845-gladiator-noc",
+	  .data = &sdm845_gladiator_noc},
+	{ .compatible = "qcom,sdm845-mem-noc",
+	  .data = &sdm845_mem_noc},
+	{ .compatible = "qcom,sdm845-mmss-noc",
+	  .data = &sdm845_mmss_noc},
+	{ .compatible = "qcom,sdm845-system-noc",
+	  .data = &sdm845_system_noc},
+	{ }
 };
 MODULE_DEVICE_TABLE(of, qnoc_of_match);
 
diff --git a/drivers/interconnect/qcom/sdm845.h b/drivers/interconnect/qcom/sdm845.h
new file mode 100644
index 0000000..776e9c2
--- /dev/null
+++ b/drivers/interconnect/qcom/sdm845.h
@@ -0,0 +1,142 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef __DRIVERS_INTERCONNECT_QCOM_SDM845_H__
+#define __DRIVERS_INTERCONNECT_QCOM_SDM845_H__
+
+#define SDM845_MASTER_A1NOC_CFG				1
+#define SDM845_MASTER_BLSP_1				2
+#define SDM845_MASTER_TSIF				3
+#define SDM845_MASTER_SDCC_2				4
+#define SDM845_MASTER_SDCC_4				5
+#define SDM845_MASTER_UFS_CARD				6
+#define SDM845_MASTER_UFS_MEM				7
+#define SDM845_MASTER_PCIE_0				8
+#define SDM845_MASTER_A2NOC_CFG				9
+#define SDM845_MASTER_QDSS_BAM				10
+#define SDM845_MASTER_BLSP_2				11
+#define SDM845_MASTER_CNOC_A2NOC			12
+#define SDM845_MASTER_CRYPTO				13
+#define SDM845_MASTER_IPA				14
+#define SDM845_MASTER_PCIE_1				15
+#define SDM845_MASTER_QDSS_ETR				16
+#define SDM845_MASTER_USB3_0				17
+#define SDM845_MASTER_USB3_1				18
+#define SDM845_MASTER_CAMNOC_HF0_UNCOMP			19
+#define SDM845_MASTER_CAMNOC_HF1_UNCOMP			20
+#define SDM845_MASTER_CAMNOC_SF_UNCOMP			21
+#define SDM845_MASTER_SPDM				22
+#define SDM845_MASTER_TIC				23
+#define SDM845_MASTER_SNOC_CNOC				24
+#define SDM845_MASTER_QDSS_DAP				25
+#define SDM845_MASTER_CNOC_DC_NOC			26
+#define SDM845_MASTER_APPSS_PROC			27
+#define SDM845_MASTER_GNOC_CFG				28
+#define SDM845_MASTER_LLCC				29
+#define SDM845_MASTER_TCU_0				30
+#define SDM845_MASTER_MEM_NOC_CFG			31
+#define SDM845_MASTER_GNOC_MEM_NOC			32
+#define SDM845_MASTER_MNOC_HF_MEM_NOC			33
+#define SDM845_MASTER_MNOC_SF_MEM_NOC			34
+#define SDM845_MASTER_SNOC_GC_MEM_NOC			35
+#define SDM845_MASTER_SNOC_SF_MEM_NOC			36
+#define SDM845_MASTER_GFX3D				37
+#define SDM845_MASTER_CNOC_MNOC_CFG			38
+#define SDM845_MASTER_CAMNOC_HF0			39
+#define SDM845_MASTER_CAMNOC_HF1			40
+#define SDM845_MASTER_CAMNOC_SF				41
+#define SDM845_MASTER_MDP0				42
+#define SDM845_MASTER_MDP1				43
+#define SDM845_MASTER_ROTATOR				44
+#define SDM845_MASTER_VIDEO_P0				45
+#define SDM845_MASTER_VIDEO_P1				46
+#define SDM845_MASTER_VIDEO_PROC			47
+#define SDM845_MASTER_SNOC_CFG				48
+#define SDM845_MASTER_A1NOC_SNOC			49
+#define SDM845_MASTER_A2NOC_SNOC			50
+#define SDM845_MASTER_GNOC_SNOC				51
+#define SDM845_MASTER_MEM_NOC_SNOC			52
+#define SDM845_MASTER_ANOC_PCIE_SNOC			53
+#define SDM845_MASTER_PIMEM				54
+#define SDM845_MASTER_GIC				55
+#define SDM845_SLAVE_A1NOC_SNOC				56
+#define SDM845_SLAVE_SERVICE_A1NOC			57
+#define SDM845_SLAVE_ANOC_PCIE_A1NOC_SNOC		58
+#define SDM845_SLAVE_A2NOC_SNOC				59
+#define SDM845_SLAVE_ANOC_PCIE_SNOC			60
+#define SDM845_SLAVE_SERVICE_A2NOC			61
+#define SDM845_SLAVE_CAMNOC_UNCOMP			62
+#define SDM845_SLAVE_A1NOC_CFG				63
+#define SDM845_SLAVE_A2NOC_CFG				64
+#define SDM845_SLAVE_AOP				65
+#define SDM845_SLAVE_AOSS				66
+#define SDM845_SLAVE_CAMERA_CFG				67
+#define SDM845_SLAVE_CLK_CTL				68
+#define SDM845_SLAVE_CDSP_CFG				69
+#define SDM845_SLAVE_RBCPR_CX_CFG			70
+#define SDM845_SLAVE_CRYPTO_0_CFG			71
+#define SDM845_SLAVE_DCC_CFG				72
+#define SDM845_SLAVE_CNOC_DDRSS				73
+#define SDM845_SLAVE_DISPLAY_CFG			74
+#define SDM845_SLAVE_GLM				75
+#define SDM845_SLAVE_GFX3D_CFG				76
+#define SDM845_SLAVE_IMEM_CFG				77
+#define SDM845_SLAVE_IPA_CFG				78
+#define SDM845_SLAVE_CNOC_MNOC_CFG			79
+#define SDM845_SLAVE_PCIE_0_CFG				80
+#define SDM845_SLAVE_PCIE_1_CFG				81
+#define SDM845_SLAVE_PDM				82
+#define SDM845_SLAVE_SOUTH_PHY_CFG			83
+#define SDM845_SLAVE_PIMEM_CFG				84
+#define SDM845_SLAVE_PRNG				85
+#define SDM845_SLAVE_QDSS_CFG				86
+#define SDM845_SLAVE_BLSP_2				87
+#define SDM845_SLAVE_BLSP_1				88
+#define SDM845_SLAVE_SDCC_2				89
+#define SDM845_SLAVE_SDCC_4				90
+#define SDM845_SLAVE_SNOC_CFG				91
+#define SDM845_SLAVE_SPDM_WRAPPER			92
+#define SDM845_SLAVE_SPSS_CFG				93
+#define SDM845_SLAVE_TCSR				94
+#define SDM845_SLAVE_TLMM_NORTH				95
+#define SDM845_SLAVE_TLMM_SOUTH				96
+#define SDM845_SLAVE_TSIF				97
+#define SDM845_SLAVE_UFS_CARD_CFG			98
+#define SDM845_SLAVE_UFS_MEM_CFG			99
+#define SDM845_SLAVE_USB3_0				100
+#define SDM845_SLAVE_USB3_1				101
+#define SDM845_SLAVE_VENUS_CFG				102
+#define SDM845_SLAVE_VSENSE_CTRL_CFG			103
+#define SDM845_SLAVE_CNOC_A2NOC				104
+#define SDM845_SLAVE_SERVICE_CNOC			105
+#define SDM845_SLAVE_LLCC_CFG				106
+#define SDM845_SLAVE_MEM_NOC_CFG			107
+#define SDM845_SLAVE_GNOC_SNOC				108
+#define SDM845_SLAVE_GNOC_MEM_NOC			109
+#define SDM845_SLAVE_SERVICE_GNOC			110
+#define SDM845_SLAVE_EBI1				111
+#define SDM845_SLAVE_MSS_PROC_MS_MPU_CFG		112
+#define SDM845_SLAVE_MEM_NOC_GNOC			113
+#define SDM845_SLAVE_LLCC				114
+#define SDM845_SLAVE_MEM_NOC_SNOC			115
+#define SDM845_SLAVE_SERVICE_MEM_NOC			116
+#define SDM845_SLAVE_MNOC_SF_MEM_NOC			117
+#define SDM845_SLAVE_MNOC_HF_MEM_NOC			118
+#define SDM845_SLAVE_SERVICE_MNOC			119
+#define SDM845_SLAVE_APPSS				120
+#define SDM845_SLAVE_SNOC_CNOC				121
+#define SDM845_SLAVE_SNOC_MEM_NOC_GC			122
+#define SDM845_SLAVE_SNOC_MEM_NOC_SF			123
+#define SDM845_SLAVE_IMEM				124
+#define SDM845_SLAVE_PCIE_0				125
+#define SDM845_SLAVE_PCIE_1				126
+#define SDM845_SLAVE_PIMEM				127
+#define SDM845_SLAVE_SERVICE_SNOC			128
+#define SDM845_SLAVE_QDSS_STM				129
+#define SDM845_SLAVE_TCU				130
+#define SDM845_MASTER_OSM_L3_APPS			131
+#define SDM845_SLAVE_OSM_L3				132
+
+#endif /* __DRIVERS_INTERCONNECT_QCOM_SDM845_H__ */
diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index d2fade9..58b4a4d 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -188,6 +188,7 @@
 	select NEED_DMA_MAP_STATE
 	select DMAR_TABLE
 	select SWIOTLB
+	select IOASID
 	help
 	  DMA remapping (DMAR) devices support enables independent address
 	  translations for Direct Memory Access (DMA) from devices.
@@ -273,7 +274,7 @@
 # OMAP IOMMU support
 config OMAP_IOMMU
 	bool "OMAP IOMMU Support"
-	depends on ARM && MMU
+	depends on ARM && MMU || (COMPILE_TEST && (ARM || ARM64 || IA64 || SPARC))
 	depends on ARCH_OMAP2PLUS || COMPILE_TEST
 	select IOMMU_API
 	---help---
@@ -291,7 +292,7 @@
 
 config ROCKCHIP_IOMMU
 	bool "Rockchip IOMMU Support"
-	depends on ARM || ARM64
+	depends on ARM || ARM64 || (COMPILE_TEST && (ARM64 || IA64 || SPARC))
 	depends on ARCH_ROCKCHIP || COMPILE_TEST
 	select IOMMU_API
 	select ARM_DMA_USE_IOMMU
@@ -325,7 +326,7 @@
 
 config EXYNOS_IOMMU
 	bool "Exynos IOMMU Support"
-	depends on ARCH_EXYNOS && MMU
+	depends on ARCH_EXYNOS && MMU || (COMPILE_TEST && (ARM || ARM64 || IA64 || SPARC))
 	depends on !CPU_BIG_ENDIAN # revisit driver if we can enable big-endian ptes
 	select IOMMU_API
 	select ARM_DMA_USE_IOMMU
@@ -361,7 +362,7 @@
 
 config SPAPR_TCE_IOMMU
 	bool "sPAPR TCE IOMMU Support"
-	depends on PPC_POWERNV || PPC_PSERIES
+	depends on PPC_POWERNV || PPC_PSERIES || (PPC && COMPILE_TEST)
 	select IOMMU_API
 	help
 	  Enables bits of IOMMU API required by VFIO. The iommu_ops
@@ -370,7 +371,7 @@
 # ARM IOMMU support
 config ARM_SMMU
 	tristate "ARM Ltd. System MMU (SMMU) Support"
-	depends on (ARM64 || ARM) && MMU
+	depends on (ARM64 || ARM || (COMPILE_TEST && !GENERIC_ATOMIC64)) && MMU
 	select IOMMU_API
 	select IOMMU_IO_PGTABLE_LPAE
 	select ARM_DMA_USE_IOMMU if ARM
@@ -440,7 +441,7 @@
 
 config S390_CCW_IOMMU
 	bool "S390 CCW IOMMU Support"
-	depends on S390 && CCW
+	depends on S390 && CCW || COMPILE_TEST
 	select IOMMU_API
 	help
 	  Enables bits of IOMMU API required by VFIO. The iommu_ops
@@ -448,7 +449,7 @@
 
 config S390_AP_IOMMU
 	bool "S390 AP IOMMU Support"
-	depends on S390 && ZCRYPT
+	depends on S390 && ZCRYPT || COMPILE_TEST
 	select IOMMU_API
 	help
 	  Enables bits of IOMMU API required by VFIO. The iommu_ops
@@ -456,7 +457,7 @@
 
 config MTK_IOMMU
 	bool "MTK IOMMU Support"
-	depends on ARM || ARM64
+	depends on ARM || ARM64 || COMPILE_TEST
 	depends on ARCH_MEDIATEK || COMPILE_TEST
 	select ARM_DMA_USE_IOMMU
 	select IOMMU_API
@@ -506,8 +507,8 @@
 	  guests to run with x2APIC mode enabled.
 
 config VIRTIO_IOMMU
-	bool "Virtio IOMMU driver"
-	depends on VIRTIO=y
+	tristate "Virtio IOMMU driver"
+	depends on VIRTIO
 	depends on ARM64
 	select IOMMU_API
 	select INTERVAL_TREE
diff --git a/drivers/iommu/amd_iommu_types.h b/drivers/iommu/amd_iommu_types.h
index f8d01d6..ca8c452 100644
--- a/drivers/iommu/amd_iommu_types.h
+++ b/drivers/iommu/amd_iommu_types.h
@@ -348,7 +348,7 @@
 
 #define DTE_GCR3_VAL_A(x)	(((x) >> 12) & 0x00007ULL)
 #define DTE_GCR3_VAL_B(x)	(((x) >> 15) & 0x0ffffULL)
-#define DTE_GCR3_VAL_C(x)	(((x) >> 31) & 0xfffffULL)
+#define DTE_GCR3_VAL_C(x)	(((x) >> 31) & 0x1fffffULL)
 
 #define DTE_GCR3_INDEX_A	0
 #define DTE_GCR3_INDEX_B	1
diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
index aa3ac2a..8250873 100644
--- a/drivers/iommu/arm-smmu-v3.c
+++ b/drivers/iommu/arm-smmu-v3.c
@@ -69,6 +69,9 @@
 #define IDR1_SSIDSIZE			GENMASK(10, 6)
 #define IDR1_SIDSIZE			GENMASK(5, 0)
 
+#define ARM_SMMU_IDR3			0xc
+#define IDR3_RIL			(1 << 10)
+
 #define ARM_SMMU_IDR5			0x14
 #define IDR5_STALL_MAX			GENMASK(31, 16)
 #define IDR5_GRAN64K			(1 << 6)
@@ -346,9 +349,14 @@
 #define CMDQ_CFGI_1_LEAF		(1UL << 0)
 #define CMDQ_CFGI_1_RANGE		GENMASK_ULL(4, 0)
 
+#define CMDQ_TLBI_0_NUM			GENMASK_ULL(16, 12)
+#define CMDQ_TLBI_RANGE_NUM_MAX		31
+#define CMDQ_TLBI_0_SCALE		GENMASK_ULL(24, 20)
 #define CMDQ_TLBI_0_VMID		GENMASK_ULL(47, 32)
 #define CMDQ_TLBI_0_ASID		GENMASK_ULL(63, 48)
 #define CMDQ_TLBI_1_LEAF		(1UL << 0)
+#define CMDQ_TLBI_1_TTL			GENMASK_ULL(9, 8)
+#define CMDQ_TLBI_1_TG			GENMASK_ULL(11, 10)
 #define CMDQ_TLBI_1_VA_MASK		GENMASK_ULL(63, 12)
 #define CMDQ_TLBI_1_IPA_MASK		GENMASK_ULL(51, 12)
 
@@ -473,9 +481,13 @@ struct arm_smmu_cmdq_ent {
 		#define CMDQ_OP_TLBI_S2_IPA	0x2a
 		#define CMDQ_OP_TLBI_NSNH_ALL	0x30
 		struct {
+			u8			num;
+			u8			scale;
 			u16			asid;
 			u16			vmid;
 			bool			leaf;
+			u8			ttl;
+			u8			tg;
 			u64			addr;
 		} tlbi;
 
@@ -548,6 +560,11 @@ struct arm_smmu_cmdq {
 	atomic_t			lock;
 };
 
+struct arm_smmu_cmdq_batch {
+	u64				cmds[CMDQ_BATCH_ENTRIES * CMDQ_ENT_DWORDS];
+	int				num;
+};
+
 struct arm_smmu_evtq {
 	struct arm_smmu_queue		q;
 	u32				max_stalls;
@@ -627,6 +644,7 @@ struct arm_smmu_device {
 #define ARM_SMMU_FEAT_HYP		(1 << 12)
 #define ARM_SMMU_FEAT_STALL_FORCE	(1 << 13)
 #define ARM_SMMU_FEAT_VAX		(1 << 14)
+#define ARM_SMMU_FEAT_RANGE_INV		(1 << 15)
 	u32				features;
 
 #define ARM_SMMU_OPT_SKIP_PREFETCH	(1 << 0)
@@ -895,14 +913,22 @@ static int arm_smmu_cmdq_build_cmd(u64 *cmd, struct arm_smmu_cmdq_ent *ent)
 		cmd[1] |= FIELD_PREP(CMDQ_CFGI_1_RANGE, 31);
 		break;
 	case CMDQ_OP_TLBI_NH_VA:
+		cmd[0] |= FIELD_PREP(CMDQ_TLBI_0_NUM, ent->tlbi.num);
+		cmd[0] |= FIELD_PREP(CMDQ_TLBI_0_SCALE, ent->tlbi.scale);
 		cmd[0] |= FIELD_PREP(CMDQ_TLBI_0_VMID, ent->tlbi.vmid);
 		cmd[0] |= FIELD_PREP(CMDQ_TLBI_0_ASID, ent->tlbi.asid);
 		cmd[1] |= FIELD_PREP(CMDQ_TLBI_1_LEAF, ent->tlbi.leaf);
+		cmd[1] |= FIELD_PREP(CMDQ_TLBI_1_TTL, ent->tlbi.ttl);
+		cmd[1] |= FIELD_PREP(CMDQ_TLBI_1_TG, ent->tlbi.tg);
 		cmd[1] |= ent->tlbi.addr & CMDQ_TLBI_1_VA_MASK;
 		break;
 	case CMDQ_OP_TLBI_S2_IPA:
+		cmd[0] |= FIELD_PREP(CMDQ_TLBI_0_NUM, ent->tlbi.num);
+		cmd[0] |= FIELD_PREP(CMDQ_TLBI_0_SCALE, ent->tlbi.scale);
 		cmd[0] |= FIELD_PREP(CMDQ_TLBI_0_VMID, ent->tlbi.vmid);
 		cmd[1] |= FIELD_PREP(CMDQ_TLBI_1_LEAF, ent->tlbi.leaf);
+		cmd[1] |= FIELD_PREP(CMDQ_TLBI_1_TTL, ent->tlbi.ttl);
+		cmd[1] |= FIELD_PREP(CMDQ_TLBI_1_TG, ent->tlbi.tg);
 		cmd[1] |= ent->tlbi.addr & CMDQ_TLBI_1_IPA_MASK;
 		break;
 	case CMDQ_OP_TLBI_NH_ASID:
@@ -1482,6 +1508,24 @@ static int arm_smmu_cmdq_issue_sync(struct arm_smmu_device *smmu)
 	return arm_smmu_cmdq_issue_cmdlist(smmu, NULL, 0, true);
 }
 
+static void arm_smmu_cmdq_batch_add(struct arm_smmu_device *smmu,
+				    struct arm_smmu_cmdq_batch *cmds,
+				    struct arm_smmu_cmdq_ent *cmd)
+{
+	if (cmds->num == CMDQ_BATCH_ENTRIES) {
+		arm_smmu_cmdq_issue_cmdlist(smmu, cmds->cmds, cmds->num, false);
+		cmds->num = 0;
+	}
+	arm_smmu_cmdq_build_cmd(&cmds->cmds[cmds->num * CMDQ_ENT_DWORDS], cmd);
+	cmds->num++;
+}
+
+static int arm_smmu_cmdq_batch_submit(struct arm_smmu_device *smmu,
+				      struct arm_smmu_cmdq_batch *cmds)
+{
+	return arm_smmu_cmdq_issue_cmdlist(smmu, cmds->cmds, cmds->num, true);
+}
+
 /* Context descriptor manipulation functions */
 static void arm_smmu_sync_cd(struct arm_smmu_domain *smmu_domain,
 			     int ssid, bool leaf)
@@ -1489,6 +1533,7 @@ static void arm_smmu_sync_cd(struct arm_smmu_domain *smmu_domain,
 	size_t i;
 	unsigned long flags;
 	struct arm_smmu_master *master;
+	struct arm_smmu_cmdq_batch cmds = {};
 	struct arm_smmu_device *smmu = smmu_domain->smmu;
 	struct arm_smmu_cmdq_ent cmd = {
 		.opcode	= CMDQ_OP_CFGI_CD,
@@ -1502,12 +1547,12 @@ static void arm_smmu_sync_cd(struct arm_smmu_domain *smmu_domain,
 	list_for_each_entry(master, &smmu_domain->devices, domain_head) {
 		for (i = 0; i < master->num_sids; i++) {
 			cmd.cfgi.sid = master->sids[i];
-			arm_smmu_cmdq_issue_cmd(smmu, &cmd);
+			arm_smmu_cmdq_batch_add(smmu, &cmds, &cmd);
 		}
 	}
 	spin_unlock_irqrestore(&smmu_domain->devices_lock, flags);
 
-	arm_smmu_cmdq_issue_sync(smmu);
+	arm_smmu_cmdq_batch_submit(smmu, &cmds);
 }
 
 static int arm_smmu_alloc_cd_leaf_table(struct arm_smmu_device *smmu,
@@ -1531,6 +1576,7 @@ static void arm_smmu_write_cd_l1_desc(__le64 *dst,
 	u64 val = (l1_desc->l2ptr_dma & CTXDESC_L1_DESC_L2PTR_MASK) |
 		  CTXDESC_L1_DESC_V;
 
+	/* See comment in arm_smmu_write_ctx_desc() */
 	WRITE_ONCE(*dst, cpu_to_le64(val));
 }
 
@@ -1726,7 +1772,8 @@ arm_smmu_write_strtab_l1_desc(__le64 *dst, struct arm_smmu_strtab_l1_desc *desc)
 	val |= FIELD_PREP(STRTAB_L1_DESC_SPAN, desc->span);
 	val |= desc->l2ptr_dma & STRTAB_L1_DESC_L2PTR_MASK;
 
-	*dst = cpu_to_le64(val);
+	/* See comment in arm_smmu_write_ctx_desc() */
+	WRITE_ONCE(*dst, cpu_to_le64(val));
 }
 
 static void arm_smmu_sync_ste_for_sid(struct arm_smmu_device *smmu, u32 sid)
@@ -2132,17 +2179,16 @@ arm_smmu_atc_inv_to_cmd(int ssid, unsigned long iova, size_t size,
 	cmd->atc.size	= log2_span;
 }
 
-static int arm_smmu_atc_inv_master(struct arm_smmu_master *master,
-				   struct arm_smmu_cmdq_ent *cmd)
+static int arm_smmu_atc_inv_master(struct arm_smmu_master *master)
 {
 	int i;
+	struct arm_smmu_cmdq_ent cmd;
 
-	if (!master->ats_enabled)
-		return 0;
+	arm_smmu_atc_inv_to_cmd(0, 0, 0, &cmd);
 
 	for (i = 0; i < master->num_sids; i++) {
-		cmd->atc.sid = master->sids[i];
-		arm_smmu_cmdq_issue_cmd(master->smmu, cmd);
+		cmd.atc.sid = master->sids[i];
+		arm_smmu_cmdq_issue_cmd(master->smmu, &cmd);
 	}
 
 	return arm_smmu_cmdq_issue_sync(master->smmu);
@@ -2151,10 +2197,11 @@ static int arm_smmu_atc_inv_master(struct arm_smmu_master *master,
 static int arm_smmu_atc_inv_domain(struct arm_smmu_domain *smmu_domain,
 				   int ssid, unsigned long iova, size_t size)
 {
-	int ret = 0;
+	int i;
 	unsigned long flags;
 	struct arm_smmu_cmdq_ent cmd;
 	struct arm_smmu_master *master;
+	struct arm_smmu_cmdq_batch cmds = {};
 
 	if (!(smmu_domain->smmu->features & ARM_SMMU_FEAT_ATS))
 		return 0;
@@ -2179,11 +2226,18 @@ static int arm_smmu_atc_inv_domain(struct arm_smmu_domain *smmu_domain,
 	arm_smmu_atc_inv_to_cmd(ssid, iova, size, &cmd);
 
 	spin_lock_irqsave(&smmu_domain->devices_lock, flags);
-	list_for_each_entry(master, &smmu_domain->devices, domain_head)
-		ret |= arm_smmu_atc_inv_master(master, &cmd);
+	list_for_each_entry(master, &smmu_domain->devices, domain_head) {
+		if (!master->ats_enabled)
+			continue;
+
+		for (i = 0; i < master->num_sids; i++) {
+			cmd.atc.sid = master->sids[i];
+			arm_smmu_cmdq_batch_add(smmu_domain->smmu, &cmds, &cmd);
+		}
+	}
 	spin_unlock_irqrestore(&smmu_domain->devices_lock, flags);
 
-	return ret ? -ETIMEDOUT : 0;
+	return arm_smmu_cmdq_batch_submit(smmu_domain->smmu, &cmds);
 }
 
 /* IO_PGTABLE API */
@@ -2218,10 +2272,10 @@ static void arm_smmu_tlb_inv_range(unsigned long iova, size_t size,
 				   size_t granule, bool leaf,
 				   struct arm_smmu_domain *smmu_domain)
 {
-	u64 cmds[CMDQ_BATCH_ENTRIES * CMDQ_ENT_DWORDS];
 	struct arm_smmu_device *smmu = smmu_domain->smmu;
-	unsigned long start = iova, end = iova + size;
-	int i = 0;
+	unsigned long start = iova, end = iova + size, num_pages = 0, tg = 0;
+	size_t inv_range = granule;
+	struct arm_smmu_cmdq_batch cmds = {};
 	struct arm_smmu_cmdq_ent cmd = {
 		.tlbi = {
 			.leaf	= leaf,
@@ -2239,19 +2293,50 @@ static void arm_smmu_tlb_inv_range(unsigned long iova, size_t size,
 		cmd.tlbi.vmid	= smmu_domain->s2_cfg.vmid;
 	}
 
+	if (smmu->features & ARM_SMMU_FEAT_RANGE_INV) {
+		/* Get the leaf page size */
+		tg = __ffs(smmu_domain->domain.pgsize_bitmap);
+
+		/* Convert page size of 12,14,16 (log2) to 1,2,3 */
+		cmd.tlbi.tg = (tg - 10) / 2;
+
+		/* Determine what level the granule is at */
+		cmd.tlbi.ttl = 4 - ((ilog2(granule) - 3) / (tg - 3));
+
+		num_pages = size >> tg;
+	}
+
 	while (iova < end) {
-		if (i == CMDQ_BATCH_ENTRIES) {
-			arm_smmu_cmdq_issue_cmdlist(smmu, cmds, i, false);
-			i = 0;
+		if (smmu->features & ARM_SMMU_FEAT_RANGE_INV) {
+			/*
+			 * On each iteration of the loop, the range is 5 bits
+			 * worth of the aligned size remaining.
+			 * The range in pages is:
+			 *
+			 * range = (num_pages & (0x1f << __ffs(num_pages)))
+			 */
+			unsigned long scale, num;
+
+			/* Determine the power of 2 multiple number of pages */
+			scale = __ffs(num_pages);
+			cmd.tlbi.scale = scale;
+
+			/* Determine how many chunks of 2^scale size we have */
+			num = (num_pages >> scale) & CMDQ_TLBI_RANGE_NUM_MAX;
+			cmd.tlbi.num = num - 1;
+
+			/* range is num * 2^scale * pgsize */
+			inv_range = num << (scale + tg);
+
+			/* Clear out the lower order bits for the next iteration */
+			num_pages -= num << scale;
 		}
 
 		cmd.tlbi.addr = iova;
-		arm_smmu_cmdq_build_cmd(&cmds[i * CMDQ_ENT_DWORDS], &cmd);
-		iova += granule;
-		i++;
+		arm_smmu_cmdq_batch_add(smmu, &cmds, &cmd);
+		iova += inv_range;
 	}
-
-	arm_smmu_cmdq_issue_cmdlist(smmu, cmds, i, true);
+	arm_smmu_cmdq_batch_submit(smmu, &cmds);
 
 	/*
 	 * Unfortunately, this can't be leaf-only since we may have
@@ -2611,7 +2696,6 @@ static void arm_smmu_enable_ats(struct arm_smmu_master *master)
 
 static void arm_smmu_disable_ats(struct arm_smmu_master *master)
 {
-	struct arm_smmu_cmdq_ent cmd;
 	struct arm_smmu_domain *smmu_domain = master->domain;
 
 	if (!master->ats_enabled)
@@ -2623,11 +2707,57 @@ static void arm_smmu_disable_ats(struct arm_smmu_master *master)
 	 * ATC invalidation via the SMMU.
 	 */
 	wmb();
-	arm_smmu_atc_inv_to_cmd(0, 0, 0, &cmd);
-	arm_smmu_atc_inv_master(master, &cmd);
+	arm_smmu_atc_inv_master(master);
 	atomic_dec(&smmu_domain->nr_ats_masters);
 }
 
+static int arm_smmu_enable_pasid(struct arm_smmu_master *master)
+{
+	int ret;
+	int features;
+	int num_pasids;
+	struct pci_dev *pdev;
+
+	if (!dev_is_pci(master->dev))
+		return -ENODEV;
+
+	pdev = to_pci_dev(master->dev);
+
+	features = pci_pasid_features(pdev);
+	if (features < 0)
+		return features;
+
+	num_pasids = pci_max_pasids(pdev);
+	if (num_pasids <= 0)
+		return num_pasids;
+
+	ret = pci_enable_pasid(pdev, features);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to enable PASID\n");
+		return ret;
+	}
+
+	master->ssid_bits = min_t(u8, ilog2(num_pasids),
+				  master->smmu->ssid_bits);
+	return 0;
+}
+
+static void arm_smmu_disable_pasid(struct arm_smmu_master *master)
+{
+	struct pci_dev *pdev;
+
+	if (!dev_is_pci(master->dev))
+		return;
+
+	pdev = to_pci_dev(master->dev);
+
+	if (!pdev->pasid_enabled)
+		return;
+
+	master->ssid_bits = 0;
+	pci_disable_pasid(pdev);
+}
+
 static void arm_smmu_detach_dev(struct arm_smmu_master *master)
 {
 	unsigned long flags;
@@ -2659,7 +2789,7 @@ static int arm_smmu_attach_dev(struct iommu_domain *domain, struct device *dev)
 	if (!fwspec)
 		return -ENOENT;
 
-	master = fwspec->iommu_priv;
+	master = dev_iommu_priv_get(dev);
 	smmu = master->smmu;
 
 	arm_smmu_detach_dev(master);
@@ -2795,7 +2925,7 @@ static int arm_smmu_add_device(struct device *dev)
 	if (!fwspec || fwspec->ops != &arm_smmu_ops)
 		return -ENODEV;
 
-	if (WARN_ON_ONCE(fwspec->iommu_priv))
+	if (WARN_ON_ONCE(dev_iommu_priv_get(dev)))
 		return -EBUSY;
 
 	smmu = arm_smmu_get_by_fwnode(fwspec->iommu_fwnode);
@@ -2810,7 +2940,7 @@ static int arm_smmu_add_device(struct device *dev)
 	master->smmu = smmu;
 	master->sids = fwspec->ids;
 	master->num_sids = fwspec->num_ids;
-	fwspec->iommu_priv = master;
+	dev_iommu_priv_set(dev, master);
 
 	/* Check the SIDs are in range of the SMMU and our stream table */
 	for (i = 0; i < master->num_sids; i++) {
@@ -2831,13 +2961,23 @@ static int arm_smmu_add_device(struct device *dev)
 
 	master->ssid_bits = min(smmu->ssid_bits, fwspec->num_pasid_bits);
 
+	/*
+	 * Note that PASID must be enabled before, and disabled after ATS:
+	 * PCI Express Base 4.0r1.0 - 10.5.1.3 ATS Control Register
+	 *
+	 *   Behavior is undefined if this bit is Set and the value of the PASID
+	 *   Enable, Execute Requested Enable, or Privileged Mode Requested bits
+	 *   are changed.
+	 */
+	arm_smmu_enable_pasid(master);
+
 	if (!(smmu->features & ARM_SMMU_FEAT_2_LVL_CDTAB))
 		master->ssid_bits = min_t(u8, master->ssid_bits,
 					  CTXDESC_LINEAR_CDMAX);
 
 	ret = iommu_device_link(&smmu->iommu, dev);
 	if (ret)
-		goto err_free_master;
+		goto err_disable_pasid;
 
 	group = iommu_group_get_for_dev(dev);
 	if (IS_ERR(group)) {
@@ -2850,9 +2990,11 @@ static int arm_smmu_add_device(struct device *dev)
 
 err_unlink:
 	iommu_device_unlink(&smmu->iommu, dev);
+err_disable_pasid:
+	arm_smmu_disable_pasid(master);
 err_free_master:
 	kfree(master);
-	fwspec->iommu_priv = NULL;
+	dev_iommu_priv_set(dev, NULL);
 	return ret;
 }
 
@@ -2865,11 +3007,12 @@ static void arm_smmu_remove_device(struct device *dev)
 	if (!fwspec || fwspec->ops != &arm_smmu_ops)
 		return;
 
-	master = fwspec->iommu_priv;
+	master = dev_iommu_priv_get(dev);
 	smmu = master->smmu;
 	arm_smmu_detach_dev(master);
 	iommu_group_remove_device(dev);
 	iommu_device_unlink(&smmu->iommu, dev);
+	arm_smmu_disable_pasid(master);
 	kfree(master);
 	iommu_fwspec_free(dev);
 }
@@ -3700,6 +3843,11 @@ static int arm_smmu_device_hw_probe(struct arm_smmu_device *smmu)
 	if (smmu->sid_bits <= STRTAB_SPLIT)
 		smmu->features &= ~ARM_SMMU_FEAT_2_LVL_STRTAB;
 
+	/* IDR3 */
+	reg = readl_relaxed(smmu->base + ARM_SMMU_IDR3);
+	if (FIELD_GET(IDR3_RIL, reg))
+		smmu->features |= ARM_SMMU_FEAT_RANGE_INV;
+
 	/* IDR5 */
 	reg = readl_relaxed(smmu->base + ARM_SMMU_IDR5);
 
diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c
index 16c4b87..a6a5796 100644
--- a/drivers/iommu/arm-smmu.c
+++ b/drivers/iommu/arm-smmu.c
@@ -98,12 +98,10 @@ struct arm_smmu_master_cfg {
 	s16				smendx[];
 };
 #define INVALID_SMENDX			-1
-#define __fwspec_cfg(fw) ((struct arm_smmu_master_cfg *)fw->iommu_priv)
-#define fwspec_smmu(fw)  (__fwspec_cfg(fw)->smmu)
-#define fwspec_smendx(fw, i) \
-	(i >= fw->num_ids ? INVALID_SMENDX : __fwspec_cfg(fw)->smendx[i])
-#define for_each_cfg_sme(fw, i, idx) \
-	for (i = 0; idx = fwspec_smendx(fw, i), i < fw->num_ids; ++i)
+#define cfg_smendx(cfg, fw, i) \
+	(i >= fw->num_ids ? INVALID_SMENDX : cfg->smendx[i])
+#define for_each_cfg_sme(cfg, fw, i, idx) \
+	for (i = 0; idx = cfg_smendx(cfg, fw, i), i < fw->num_ids; ++i)
 
 static bool using_legacy_binding, using_generic_binding;
 
@@ -1061,7 +1059,7 @@ static bool arm_smmu_free_sme(struct arm_smmu_device *smmu, int idx)
 static int arm_smmu_master_alloc_smes(struct device *dev)
 {
 	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
-	struct arm_smmu_master_cfg *cfg = fwspec->iommu_priv;
+	struct arm_smmu_master_cfg *cfg = dev_iommu_priv_get(dev);
 	struct arm_smmu_device *smmu = cfg->smmu;
 	struct arm_smmu_smr *smrs = smmu->smrs;
 	struct iommu_group *group;
@@ -1069,7 +1067,7 @@ static int arm_smmu_master_alloc_smes(struct device *dev)
 
 	mutex_lock(&smmu->stream_map_mutex);
 	/* Figure out a viable stream map entry allocation */
-	for_each_cfg_sme(fwspec, i, idx) {
+	for_each_cfg_sme(cfg, fwspec, i, idx) {
 		u16 sid = FIELD_GET(ARM_SMMU_SMR_ID, fwspec->ids[i]);
 		u16 mask = FIELD_GET(ARM_SMMU_SMR_MASK, fwspec->ids[i]);
 
@@ -1100,7 +1098,7 @@ static int arm_smmu_master_alloc_smes(struct device *dev)
 	iommu_group_put(group);
 
 	/* It worked! Now, poke the actual hardware */
-	for_each_cfg_sme(fwspec, i, idx) {
+	for_each_cfg_sme(cfg, fwspec, i, idx) {
 		arm_smmu_write_sme(smmu, idx);
 		smmu->s2crs[idx].group = group;
 	}
@@ -1117,14 +1115,14 @@ static int arm_smmu_master_alloc_smes(struct device *dev)
 	return ret;
 }
 
-static void arm_smmu_master_free_smes(struct iommu_fwspec *fwspec)
+static void arm_smmu_master_free_smes(struct arm_smmu_master_cfg *cfg,
+				      struct iommu_fwspec *fwspec)
 {
-	struct arm_smmu_device *smmu = fwspec_smmu(fwspec);
-	struct arm_smmu_master_cfg *cfg = fwspec->iommu_priv;
+	struct arm_smmu_device *smmu = cfg->smmu;
 	int i, idx;
 
 	mutex_lock(&smmu->stream_map_mutex);
-	for_each_cfg_sme(fwspec, i, idx) {
+	for_each_cfg_sme(cfg, fwspec, i, idx) {
 		if (arm_smmu_free_sme(smmu, idx))
 			arm_smmu_write_sme(smmu, idx);
 		cfg->smendx[i] = INVALID_SMENDX;
@@ -1133,6 +1131,7 @@ static void arm_smmu_master_free_smes(struct iommu_fwspec *fwspec)
 }
 
 static int arm_smmu_domain_add_master(struct arm_smmu_domain *smmu_domain,
+				      struct arm_smmu_master_cfg *cfg,
 				      struct iommu_fwspec *fwspec)
 {
 	struct arm_smmu_device *smmu = smmu_domain->smmu;
@@ -1146,7 +1145,7 @@ static int arm_smmu_domain_add_master(struct arm_smmu_domain *smmu_domain,
 	else
 		type = S2CR_TYPE_TRANS;
 
-	for_each_cfg_sme(fwspec, i, idx) {
+	for_each_cfg_sme(cfg, fwspec, i, idx) {
 		if (type == s2cr[idx].type && cbndx == s2cr[idx].cbndx)
 			continue;
 
@@ -1160,10 +1159,11 @@ static int arm_smmu_domain_add_master(struct arm_smmu_domain *smmu_domain,
 
 static int arm_smmu_attach_dev(struct iommu_domain *domain, struct device *dev)
 {
-	int ret;
-	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
-	struct arm_smmu_device *smmu;
 	struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain);
+	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
+	struct arm_smmu_master_cfg *cfg;
+	struct arm_smmu_device *smmu;
+	int ret;
 
 	if (!fwspec || fwspec->ops != &arm_smmu_ops) {
 		dev_err(dev, "cannot attach to SMMU, is it on the same bus?\n");
@@ -1177,10 +1177,11 @@ static int arm_smmu_attach_dev(struct iommu_domain *domain, struct device *dev)
 	 * domains, just say no (but more politely than by dereferencing NULL).
 	 * This should be at least a WARN_ON once that's sorted.
 	 */
-	if (!fwspec->iommu_priv)
+	cfg = dev_iommu_priv_get(dev);
+	if (!cfg)
 		return -ENODEV;
 
-	smmu = fwspec_smmu(fwspec);
+	smmu = cfg->smmu;
 
 	ret = arm_smmu_rpm_get(smmu);
 	if (ret < 0)
@@ -1204,7 +1205,7 @@ static int arm_smmu_attach_dev(struct iommu_domain *domain, struct device *dev)
 	}
 
 	/* Looks ok, so add the device to the domain */
-	ret = arm_smmu_domain_add_master(smmu_domain, fwspec);
+	ret = arm_smmu_domain_add_master(smmu_domain, cfg, fwspec);
 
 	/*
 	 * Setup an autosuspend delay to avoid bouncing runpm state.
@@ -1383,7 +1384,7 @@ struct arm_smmu_device *arm_smmu_get_by_fwnode(struct fwnode_handle *fwnode)
 
 static int arm_smmu_add_device(struct device *dev)
 {
-	struct arm_smmu_device *smmu;
+	struct arm_smmu_device *smmu = NULL;
 	struct arm_smmu_master_cfg *cfg;
 	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
 	int i, ret;
@@ -1429,7 +1430,7 @@ static int arm_smmu_add_device(struct device *dev)
 		goto out_free;
 
 	cfg->smmu = smmu;
-	fwspec->iommu_priv = cfg;
+	dev_iommu_priv_set(dev, cfg);
 	while (i--)
 		cfg->smendx[i] = INVALID_SMENDX;
 
@@ -1467,7 +1468,7 @@ static void arm_smmu_remove_device(struct device *dev)
 	if (!fwspec || fwspec->ops != &arm_smmu_ops)
 		return;
 
-	cfg  = fwspec->iommu_priv;
+	cfg  = dev_iommu_priv_get(dev);
 	smmu = cfg->smmu;
 
 	ret = arm_smmu_rpm_get(smmu);
@@ -1475,23 +1476,25 @@ static void arm_smmu_remove_device(struct device *dev)
 		return;
 
 	iommu_device_unlink(&smmu->iommu, dev);
-	arm_smmu_master_free_smes(fwspec);
+	arm_smmu_master_free_smes(cfg, fwspec);
 
 	arm_smmu_rpm_put(smmu);
 
+	dev_iommu_priv_set(dev, NULL);
 	iommu_group_remove_device(dev);
-	kfree(fwspec->iommu_priv);
+	kfree(cfg);
 	iommu_fwspec_free(dev);
 }
 
 static struct iommu_group *arm_smmu_device_group(struct device *dev)
 {
+	struct arm_smmu_master_cfg *cfg = dev_iommu_priv_get(dev);
 	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
-	struct arm_smmu_device *smmu = fwspec_smmu(fwspec);
+	struct arm_smmu_device *smmu = cfg->smmu;
 	struct iommu_group *group = NULL;
 	int i, idx;
 
-	for_each_cfg_sme(fwspec, i, idx) {
+	for_each_cfg_sme(cfg, fwspec, i, idx) {
 		if (group && smmu->s2crs[idx].group &&
 		    group != smmu->s2crs[idx].group)
 			return ERR_PTR(-EINVAL);
diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
index 4be5494..ef0a524 100644
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -4501,7 +4501,8 @@ static struct dmar_atsr_unit *dmar_find_atsr(struct acpi_dmar_atsr *atsr)
 	struct dmar_atsr_unit *atsru;
 	struct acpi_dmar_atsr *tmp;
 
-	list_for_each_entry_rcu(atsru, &dmar_atsr_units, list) {
+	list_for_each_entry_rcu(atsru, &dmar_atsr_units, list,
+				dmar_rcu_check()) {
 		tmp = (struct acpi_dmar_atsr *)atsru->hdr;
 		if (atsr->segment != tmp->segment)
 			continue;
diff --git a/drivers/iommu/intel-svm.c b/drivers/iommu/intel-svm.c
index d7f2a53..2998418 100644
--- a/drivers/iommu/intel-svm.c
+++ b/drivers/iommu/intel-svm.c
@@ -531,7 +531,7 @@ struct page_req_dsc {
 	u64 priv_data[2];
 };
 
-#define PRQ_RING_MASK ((0x1000 << PRQ_ORDER) - 0x10)
+#define PRQ_RING_MASK	((0x1000 << PRQ_ORDER) - 0x20)
 
 static bool access_error(struct vm_area_struct *vma, struct page_req_dsc *req)
 {
@@ -611,14 +611,15 @@ static irqreturn_t prq_event_thread(int irq, void *d)
 		 * any faults on kernel addresses. */
 		if (!svm->mm)
 			goto bad_req;
-		/* If the mm is already defunct, don't handle faults. */
-		if (!mmget_not_zero(svm->mm))
-			goto bad_req;
 
 		/* If address is not canonical, return invalid response */
 		if (!is_canonical_address(address))
 			goto bad_req;
 
+		/* If the mm is already defunct, don't handle faults. */
+		if (!mmget_not_zero(svm->mm))
+			goto bad_req;
+
 		down_read(&svm->mm->mmap_sem);
 		vma = find_extend_vma(svm->mm, address);
 		if (!vma || address < vma->vm_start)
diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
index 3e35284..2b47141 100644
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -152,9 +152,9 @@ void iommu_device_unregister(struct iommu_device *iommu)
 }
 EXPORT_SYMBOL_GPL(iommu_device_unregister);
 
-static struct iommu_param *iommu_get_dev_param(struct device *dev)
+static struct dev_iommu *dev_iommu_get(struct device *dev)
 {
-	struct iommu_param *param = dev->iommu_param;
+	struct dev_iommu *param = dev->iommu;
 
 	if (param)
 		return param;
@@ -164,14 +164,14 @@ static struct iommu_param *iommu_get_dev_param(struct device *dev)
 		return NULL;
 
 	mutex_init(&param->lock);
-	dev->iommu_param = param;
+	dev->iommu = param;
 	return param;
 }
 
-static void iommu_free_dev_param(struct device *dev)
+static void dev_iommu_free(struct device *dev)
 {
-	kfree(dev->iommu_param);
-	dev->iommu_param = NULL;
+	kfree(dev->iommu);
+	dev->iommu = NULL;
 }
 
 int iommu_probe_device(struct device *dev)
@@ -183,7 +183,7 @@ int iommu_probe_device(struct device *dev)
 	if (!ops)
 		return -EINVAL;
 
-	if (!iommu_get_dev_param(dev))
+	if (!dev_iommu_get(dev))
 		return -ENOMEM;
 
 	if (!try_module_get(ops->owner)) {
@@ -200,7 +200,7 @@ int iommu_probe_device(struct device *dev)
 err_module_put:
 	module_put(ops->owner);
 err_free_dev_param:
-	iommu_free_dev_param(dev);
+	dev_iommu_free(dev);
 	return ret;
 }
 
@@ -211,9 +211,9 @@ void iommu_release_device(struct device *dev)
 	if (dev->iommu_group)
 		ops->remove_device(dev);
 
-	if (dev->iommu_param) {
+	if (dev->iommu) {
 		module_put(ops->owner);
-		iommu_free_dev_param(dev);
+		dev_iommu_free(dev);
 	}
 }
 
@@ -972,7 +972,7 @@ int iommu_register_device_fault_handler(struct device *dev,
 					iommu_dev_fault_handler_t handler,
 					void *data)
 {
-	struct iommu_param *param = dev->iommu_param;
+	struct dev_iommu *param = dev->iommu;
 	int ret = 0;
 
 	if (!param)
@@ -1015,7 +1015,7 @@ EXPORT_SYMBOL_GPL(iommu_register_device_fault_handler);
  */
 int iommu_unregister_device_fault_handler(struct device *dev)
 {
-	struct iommu_param *param = dev->iommu_param;
+	struct dev_iommu *param = dev->iommu;
 	int ret = 0;
 
 	if (!param)
@@ -1055,7 +1055,7 @@ EXPORT_SYMBOL_GPL(iommu_unregister_device_fault_handler);
  */
 int iommu_report_device_fault(struct device *dev, struct iommu_fault_event *evt)
 {
-	struct iommu_param *param = dev->iommu_param;
+	struct dev_iommu *param = dev->iommu;
 	struct iommu_fault_event *evt_pending = NULL;
 	struct iommu_fault_param *fparam;
 	int ret = 0;
@@ -1104,7 +1104,7 @@ int iommu_page_response(struct device *dev,
 	int ret = -EINVAL;
 	struct iommu_fault_event *evt;
 	struct iommu_fault_page_request *prm;
-	struct iommu_param *param = dev->iommu_param;
+	struct dev_iommu *param = dev->iommu;
 	struct iommu_domain *domain = iommu_get_domain_for_dev(dev);
 
 	if (!domain || !domain->ops->page_response)
@@ -2405,7 +2405,11 @@ int iommu_fwspec_init(struct device *dev, struct fwnode_handle *iommu_fwnode,
 	if (fwspec)
 		return ops == fwspec->ops ? 0 : -EINVAL;
 
-	fwspec = kzalloc(sizeof(*fwspec), GFP_KERNEL);
+	if (!dev_iommu_get(dev))
+		return -ENOMEM;
+
+	/* Preallocate for the overwhelmingly common case of 1 ID */
+	fwspec = kzalloc(struct_size(fwspec, ids, 1), GFP_KERNEL);
 	if (!fwspec)
 		return -ENOMEM;
 
@@ -2432,15 +2436,15 @@ EXPORT_SYMBOL_GPL(iommu_fwspec_free);
 int iommu_fwspec_add_ids(struct device *dev, u32 *ids, int num_ids)
 {
 	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
-	size_t size;
-	int i;
+	int i, new_num;
 
 	if (!fwspec)
 		return -EINVAL;
 
-	size = offsetof(struct iommu_fwspec, ids[fwspec->num_ids + num_ids]);
-	if (size > sizeof(*fwspec)) {
-		fwspec = krealloc(fwspec, size, GFP_KERNEL);
+	new_num = fwspec->num_ids + num_ids;
+	if (new_num > 1) {
+		fwspec = krealloc(fwspec, struct_size(fwspec, ids, new_num),
+				  GFP_KERNEL);
 		if (!fwspec)
 			return -ENOMEM;
 
@@ -2450,7 +2454,7 @@ int iommu_fwspec_add_ids(struct device *dev, u32 *ids, int num_ids)
 	for (i = 0; i < num_ids; i++)
 		fwspec->ids[fwspec->num_ids + i] = ids[i];
 
-	fwspec->num_ids += num_ids;
+	fwspec->num_ids = new_num;
 	return 0;
 }
 EXPORT_SYMBOL_GPL(iommu_fwspec_add_ids);
diff --git a/drivers/iommu/ipmmu-vmsa.c b/drivers/iommu/ipmmu-vmsa.c
index ecb3f94..310cf09 100644
--- a/drivers/iommu/ipmmu-vmsa.c
+++ b/drivers/iommu/ipmmu-vmsa.c
@@ -89,9 +89,7 @@ static struct ipmmu_vmsa_domain *to_vmsa_domain(struct iommu_domain *dom)
 
 static struct ipmmu_vmsa_device *to_ipmmu(struct device *dev)
 {
-	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
-
-	return fwspec ? fwspec->iommu_priv : NULL;
+	return dev_iommu_priv_get(dev);
 }
 
 #define TLB_LOOP_TIMEOUT		100	/* 100us */
@@ -727,14 +725,13 @@ static phys_addr_t ipmmu_iova_to_phys(struct iommu_domain *io_domain,
 static int ipmmu_init_platform_device(struct device *dev,
 				      struct of_phandle_args *args)
 {
-	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
 	struct platform_device *ipmmu_pdev;
 
 	ipmmu_pdev = of_find_device_by_node(args->np);
 	if (!ipmmu_pdev)
 		return -ENODEV;
 
-	fwspec->iommu_priv = platform_get_drvdata(ipmmu_pdev);
+	dev_iommu_priv_set(dev, platform_get_drvdata(ipmmu_pdev));
 
 	return 0;
 }
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 95945f4..5f4d6df 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -358,8 +358,8 @@ static void mtk_iommu_domain_free(struct iommu_domain *domain)
 static int mtk_iommu_attach_device(struct iommu_domain *domain,
 				   struct device *dev)
 {
+	struct mtk_iommu_data *data = dev_iommu_priv_get(dev);
 	struct mtk_iommu_domain *dom = to_mtk_domain(domain);
-	struct mtk_iommu_data *data = dev_iommu_fwspec_get(dev)->iommu_priv;
 
 	if (!data)
 		return -ENODEV;
@@ -378,7 +378,7 @@ static int mtk_iommu_attach_device(struct iommu_domain *domain,
 static void mtk_iommu_detach_device(struct iommu_domain *domain,
 				    struct device *dev)
 {
-	struct mtk_iommu_data *data = dev_iommu_fwspec_get(dev)->iommu_priv;
+	struct mtk_iommu_data *data = dev_iommu_priv_get(dev);
 
 	if (!data)
 		return;
@@ -450,7 +450,7 @@ static int mtk_iommu_add_device(struct device *dev)
 	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
 		return -ENODEV; /* Not a iommu client device */
 
-	data = fwspec->iommu_priv;
+	data = dev_iommu_priv_get(dev);
 	iommu_device_link(&data->iommu, dev);
 
 	group = iommu_group_get_for_dev(dev);
@@ -469,7 +469,7 @@ static void mtk_iommu_remove_device(struct device *dev)
 	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
 		return;
 
-	data = fwspec->iommu_priv;
+	data = dev_iommu_priv_get(dev);
 	iommu_device_unlink(&data->iommu, dev);
 
 	iommu_group_remove_device(dev);
@@ -496,7 +496,6 @@ static struct iommu_group *mtk_iommu_device_group(struct device *dev)
 
 static int mtk_iommu_of_xlate(struct device *dev, struct of_phandle_args *args)
 {
-	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
 	struct platform_device *m4updev;
 
 	if (args->args_count != 1) {
@@ -505,13 +504,13 @@ static int mtk_iommu_of_xlate(struct device *dev, struct of_phandle_args *args)
 		return -EINVAL;
 	}
 
-	if (!fwspec->iommu_priv) {
+	if (!dev_iommu_priv_get(dev)) {
 		/* Get the m4u device */
 		m4updev = of_find_device_by_node(args->np);
 		if (WARN_ON(!m4updev))
 			return -EINVAL;
 
-		fwspec->iommu_priv = platform_get_drvdata(m4updev);
+		dev_iommu_priv_set(dev, platform_get_drvdata(m4updev));
 	}
 
 	return iommu_fwspec_add_ids(dev, args->args, 1);
diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
index e93b94e..a31be05 100644
--- a/drivers/iommu/mtk_iommu_v1.c
+++ b/drivers/iommu/mtk_iommu_v1.c
@@ -263,8 +263,8 @@ static void mtk_iommu_domain_free(struct iommu_domain *domain)
 static int mtk_iommu_attach_device(struct iommu_domain *domain,
 				   struct device *dev)
 {
+	struct mtk_iommu_data *data = dev_iommu_priv_get(dev);
 	struct mtk_iommu_domain *dom = to_mtk_domain(domain);
-	struct mtk_iommu_data *data = dev_iommu_fwspec_get(dev)->iommu_priv;
 	int ret;
 
 	if (!data)
@@ -286,7 +286,7 @@ static int mtk_iommu_attach_device(struct iommu_domain *domain,
 static void mtk_iommu_detach_device(struct iommu_domain *domain,
 				    struct device *dev)
 {
-	struct mtk_iommu_data *data = dev_iommu_fwspec_get(dev)->iommu_priv;
+	struct mtk_iommu_data *data = dev_iommu_priv_get(dev);
 
 	if (!data)
 		return;
@@ -387,20 +387,20 @@ static int mtk_iommu_create_mapping(struct device *dev,
 		return -EINVAL;
 	}
 
-	if (!fwspec->iommu_priv) {
+	if (!dev_iommu_priv_get(dev)) {
 		/* Get the m4u device */
 		m4updev = of_find_device_by_node(args->np);
 		if (WARN_ON(!m4updev))
 			return -EINVAL;
 
-		fwspec->iommu_priv = platform_get_drvdata(m4updev);
+		dev_iommu_priv_set(dev, platform_get_drvdata(m4updev));
 	}
 
 	ret = iommu_fwspec_add_ids(dev, args->args, 1);
 	if (ret)
 		return ret;
 
-	data = fwspec->iommu_priv;
+	data = dev_iommu_priv_get(dev);
 	m4udev = data->dev;
 	mtk_mapping = m4udev->archdata.iommu;
 	if (!mtk_mapping) {
@@ -459,7 +459,7 @@ static int mtk_iommu_add_device(struct device *dev)
 	if (err)
 		return err;
 
-	data = fwspec->iommu_priv;
+	data = dev_iommu_priv_get(dev);
 	mtk_mapping = data->dev->archdata.iommu;
 	err = arm_iommu_attach_device(dev, mtk_mapping);
 	if (err) {
@@ -478,7 +478,7 @@ static void mtk_iommu_remove_device(struct device *dev)
 	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
 		return;
 
-	data = fwspec->iommu_priv;
+	data = dev_iommu_priv_get(dev);
 	iommu_device_unlink(&data->iommu, dev);
 
 	iommu_group_remove_device(dev);
diff --git a/drivers/iommu/omap-iommu.c b/drivers/iommu/omap-iommu.c
index be551cc..887fefc 100644
--- a/drivers/iommu/omap-iommu.c
+++ b/drivers/iommu/omap-iommu.c
@@ -167,7 +167,7 @@ static int omap2_iommu_enable(struct omap_iommu *obj)
 {
 	u32 l, pa;
 
-	if (!obj->iopgd || !IS_ALIGNED((u32)obj->iopgd,  SZ_16K))
+	if (!obj->iopgd || !IS_ALIGNED((unsigned long)obj->iopgd,  SZ_16K))
 		return -EINVAL;
 
 	pa = virt_to_phys(obj->iopgd);
@@ -434,7 +434,7 @@ static void flush_iotlb_page(struct omap_iommu *obj, u32 da)
 		bytes = iopgsz_to_bytes(cr.cam & 3);
 
 		if ((start <= da) && (da < start + bytes)) {
-			dev_dbg(obj->dev, "%s: %08x<=%08x(%x)\n",
+			dev_dbg(obj->dev, "%s: %08x<=%08x(%zx)\n",
 				__func__, start, da, bytes);
 			iotlb_load_cr(obj, &cr);
 			iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY);
@@ -1352,11 +1352,11 @@ static int omap_iommu_map(struct iommu_domain *domain, unsigned long da,
 
 	omap_pgsz = bytes_to_iopgsz(bytes);
 	if (omap_pgsz < 0) {
-		dev_err(dev, "invalid size to map: %d\n", bytes);
+		dev_err(dev, "invalid size to map: %zu\n", bytes);
 		return -EINVAL;
 	}
 
-	dev_dbg(dev, "mapping da 0x%lx to pa %pa size 0x%x\n", da, &pa, bytes);
+	dev_dbg(dev, "mapping da 0x%lx to pa %pa size 0x%zx\n", da, &pa, bytes);
 
 	iotlb_init_entry(&e, da, pa, omap_pgsz);
 
@@ -1393,7 +1393,7 @@ static size_t omap_iommu_unmap(struct iommu_domain *domain, unsigned long da,
 	size_t bytes = 0;
 	int i;
 
-	dev_dbg(dev, "unmapping da 0x%lx size %u\n", da, size);
+	dev_dbg(dev, "unmapping da 0x%lx size %zu\n", da, size);
 
 	iommu = omap_domain->iommus;
 	for (i = 0; i < omap_domain->num_iommus; i++, iommu++) {
diff --git a/drivers/iommu/omap-iopgtable.h b/drivers/iommu/omap-iopgtable.h
index 1a4adb5..51d7400 100644
--- a/drivers/iommu/omap-iopgtable.h
+++ b/drivers/iommu/omap-iopgtable.h
@@ -63,7 +63,8 @@
  *
  * va to pa translation
  */
-static inline phys_addr_t omap_iommu_translate(u32 d, u32 va, u32 mask)
+static inline phys_addr_t omap_iommu_translate(unsigned long d, dma_addr_t va,
+					       dma_addr_t mask)
 {
 	return (d & mask) | (va & (~mask));
 }
diff --git a/drivers/iommu/qcom_iommu.c b/drivers/iommu/qcom_iommu.c
index 4328da0..0e2a964 100644
--- a/drivers/iommu/qcom_iommu.c
+++ b/drivers/iommu/qcom_iommu.c
@@ -48,7 +48,7 @@ struct qcom_iommu_dev {
 	void __iomem		*local_base;
 	u32			 sec_id;
 	u8			 num_ctxs;
-	struct qcom_iommu_ctx	*ctxs[0];   /* indexed by asid-1 */
+	struct qcom_iommu_ctx	*ctxs[];   /* indexed by asid-1 */
 };
 
 struct qcom_iommu_ctx {
@@ -74,16 +74,19 @@ static struct qcom_iommu_domain *to_qcom_iommu_domain(struct iommu_domain *dom)
 
 static const struct iommu_ops qcom_iommu_ops;
 
-static struct qcom_iommu_dev * to_iommu(struct iommu_fwspec *fwspec)
+static struct qcom_iommu_dev * to_iommu(struct device *dev)
 {
+	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
+
 	if (!fwspec || fwspec->ops != &qcom_iommu_ops)
 		return NULL;
-	return fwspec->iommu_priv;
+
+	return dev_iommu_priv_get(dev);
 }
 
-static struct qcom_iommu_ctx * to_ctx(struct iommu_fwspec *fwspec, unsigned asid)
+static struct qcom_iommu_ctx * to_ctx(struct device *dev, unsigned asid)
 {
-	struct qcom_iommu_dev *qcom_iommu = to_iommu(fwspec);
+	struct qcom_iommu_dev *qcom_iommu = to_iommu(dev);
 	if (!qcom_iommu)
 		return NULL;
 	return qcom_iommu->ctxs[asid - 1];
@@ -115,11 +118,14 @@ iommu_readq(struct qcom_iommu_ctx *ctx, unsigned reg)
 
 static void qcom_iommu_tlb_sync(void *cookie)
 {
-	struct iommu_fwspec *fwspec = cookie;
+	struct iommu_fwspec *fwspec;
+	struct device *dev = cookie;
 	unsigned i;
 
+	fwspec = dev_iommu_fwspec_get(dev);
+
 	for (i = 0; i < fwspec->num_ids; i++) {
-		struct qcom_iommu_ctx *ctx = to_ctx(fwspec, fwspec->ids[i]);
+		struct qcom_iommu_ctx *ctx = to_ctx(dev, fwspec->ids[i]);
 		unsigned int val, ret;
 
 		iommu_writel(ctx, ARM_SMMU_CB_TLBSYNC, 0);
@@ -133,11 +139,14 @@ static void qcom_iommu_tlb_sync(void *cookie)
 
 static void qcom_iommu_tlb_inv_context(void *cookie)
 {
-	struct iommu_fwspec *fwspec = cookie;
+	struct device *dev = cookie;
+	struct iommu_fwspec *fwspec;
 	unsigned i;
 
+	fwspec = dev_iommu_fwspec_get(dev);
+
 	for (i = 0; i < fwspec->num_ids; i++) {
-		struct qcom_iommu_ctx *ctx = to_ctx(fwspec, fwspec->ids[i]);
+		struct qcom_iommu_ctx *ctx = to_ctx(dev, fwspec->ids[i]);
 		iommu_writel(ctx, ARM_SMMU_CB_S1_TLBIASID, ctx->asid);
 	}
 
@@ -147,13 +156,16 @@ static void qcom_iommu_tlb_inv_context(void *cookie)
 static void qcom_iommu_tlb_inv_range_nosync(unsigned long iova, size_t size,
 					    size_t granule, bool leaf, void *cookie)
 {
-	struct iommu_fwspec *fwspec = cookie;
+	struct device *dev = cookie;
+	struct iommu_fwspec *fwspec;
 	unsigned i, reg;
 
 	reg = leaf ? ARM_SMMU_CB_S1_TLBIVAL : ARM_SMMU_CB_S1_TLBIVA;
 
+	fwspec = dev_iommu_fwspec_get(dev);
+
 	for (i = 0; i < fwspec->num_ids; i++) {
-		struct qcom_iommu_ctx *ctx = to_ctx(fwspec, fwspec->ids[i]);
+		struct qcom_iommu_ctx *ctx = to_ctx(dev, fwspec->ids[i]);
 		size_t s = size;
 
 		iova = (iova >> 12) << 12;
@@ -222,9 +234,10 @@ static irqreturn_t qcom_iommu_fault(int irq, void *dev)
 
 static int qcom_iommu_init_domain(struct iommu_domain *domain,
 				  struct qcom_iommu_dev *qcom_iommu,
-				  struct iommu_fwspec *fwspec)
+				  struct device *dev)
 {
 	struct qcom_iommu_domain *qcom_domain = to_qcom_iommu_domain(domain);
+	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
 	struct io_pgtable_ops *pgtbl_ops;
 	struct io_pgtable_cfg pgtbl_cfg;
 	int i, ret = 0;
@@ -243,7 +256,7 @@ static int qcom_iommu_init_domain(struct iommu_domain *domain,
 	};
 
 	qcom_domain->iommu = qcom_iommu;
-	pgtbl_ops = alloc_io_pgtable_ops(ARM_32_LPAE_S1, &pgtbl_cfg, fwspec);
+	pgtbl_ops = alloc_io_pgtable_ops(ARM_32_LPAE_S1, &pgtbl_cfg, dev);
 	if (!pgtbl_ops) {
 		dev_err(qcom_iommu->dev, "failed to allocate pagetable ops\n");
 		ret = -ENOMEM;
@@ -256,7 +269,7 @@ static int qcom_iommu_init_domain(struct iommu_domain *domain,
 	domain->geometry.force_aperture = true;
 
 	for (i = 0; i < fwspec->num_ids; i++) {
-		struct qcom_iommu_ctx *ctx = to_ctx(fwspec, fwspec->ids[i]);
+		struct qcom_iommu_ctx *ctx = to_ctx(dev, fwspec->ids[i]);
 
 		if (!ctx->secure_init) {
 			ret = qcom_scm_restore_sec_cfg(qcom_iommu->sec_id, ctx->asid);
@@ -363,8 +376,7 @@ static void qcom_iommu_domain_free(struct iommu_domain *domain)
 
 static int qcom_iommu_attach_dev(struct iommu_domain *domain, struct device *dev)
 {
-	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
-	struct qcom_iommu_dev *qcom_iommu = to_iommu(fwspec);
+	struct qcom_iommu_dev *qcom_iommu = to_iommu(dev);
 	struct qcom_iommu_domain *qcom_domain = to_qcom_iommu_domain(domain);
 	int ret;
 
@@ -375,7 +387,7 @@ static int qcom_iommu_attach_dev(struct iommu_domain *domain, struct device *dev
 
 	/* Ensure that the domain is finalized */
 	pm_runtime_get_sync(qcom_iommu->dev);
-	ret = qcom_iommu_init_domain(domain, qcom_iommu, fwspec);
+	ret = qcom_iommu_init_domain(domain, qcom_iommu, dev);
 	pm_runtime_put_sync(qcom_iommu->dev);
 	if (ret < 0)
 		return ret;
@@ -397,9 +409,9 @@ static int qcom_iommu_attach_dev(struct iommu_domain *domain, struct device *dev
 
 static void qcom_iommu_detach_dev(struct iommu_domain *domain, struct device *dev)
 {
-	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
-	struct qcom_iommu_dev *qcom_iommu = to_iommu(fwspec);
 	struct qcom_iommu_domain *qcom_domain = to_qcom_iommu_domain(domain);
+	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
+	struct qcom_iommu_dev *qcom_iommu = to_iommu(dev);
 	unsigned i;
 
 	if (WARN_ON(!qcom_domain->iommu))
@@ -407,7 +419,7 @@ static void qcom_iommu_detach_dev(struct iommu_domain *domain, struct device *de
 
 	pm_runtime_get_sync(qcom_iommu->dev);
 	for (i = 0; i < fwspec->num_ids; i++) {
-		struct qcom_iommu_ctx *ctx = to_ctx(fwspec, fwspec->ids[i]);
+		struct qcom_iommu_ctx *ctx = to_ctx(dev, fwspec->ids[i]);
 
 		/* Disable the context bank: */
 		iommu_writel(ctx, ARM_SMMU_CB_SCTLR, 0);
@@ -514,7 +526,7 @@ static bool qcom_iommu_capable(enum iommu_cap cap)
 
 static int qcom_iommu_add_device(struct device *dev)
 {
-	struct qcom_iommu_dev *qcom_iommu = to_iommu(dev_iommu_fwspec_get(dev));
+	struct qcom_iommu_dev *qcom_iommu = to_iommu(dev);
 	struct iommu_group *group;
 	struct device_link *link;
 
@@ -545,7 +557,7 @@ static int qcom_iommu_add_device(struct device *dev)
 
 static void qcom_iommu_remove_device(struct device *dev)
 {
-	struct qcom_iommu_dev *qcom_iommu = to_iommu(dev_iommu_fwspec_get(dev));
+	struct qcom_iommu_dev *qcom_iommu = to_iommu(dev);
 
 	if (!qcom_iommu)
 		return;
@@ -557,7 +569,6 @@ static void qcom_iommu_remove_device(struct device *dev)
 
 static int qcom_iommu_of_xlate(struct device *dev, struct of_phandle_args *args)
 {
-	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
 	struct qcom_iommu_dev *qcom_iommu;
 	struct platform_device *iommu_pdev;
 	unsigned asid = args->args[0];
@@ -583,14 +594,14 @@ static int qcom_iommu_of_xlate(struct device *dev, struct of_phandle_args *args)
 	    WARN_ON(asid > qcom_iommu->num_ctxs))
 		return -EINVAL;
 
-	if (!fwspec->iommu_priv) {
-		fwspec->iommu_priv = qcom_iommu;
+	if (!dev_iommu_priv_get(dev)) {
+		dev_iommu_priv_set(dev, qcom_iommu);
 	} else {
 		/* make sure devices iommus dt node isn't referring to
 		 * multiple different iommu devices.  Multiple context
 		 * banks are ok, but multiple devices are not:
 		 */
-		if (WARN_ON(qcom_iommu != fwspec->iommu_priv))
+		if (WARN_ON(qcom_iommu != dev_iommu_priv_get(dev)))
 			return -EINVAL;
 	}
 
diff --git a/drivers/iommu/tegra-gart.c b/drivers/iommu/tegra-gart.c
index 3fb7ba7..db6559e 100644
--- a/drivers/iommu/tegra-gart.c
+++ b/drivers/iommu/tegra-gart.c
@@ -247,7 +247,7 @@ static int gart_iommu_add_device(struct device *dev)
 {
 	struct iommu_group *group;
 
-	if (!dev->iommu_fwspec)
+	if (!dev_iommu_fwspec_get(dev))
 		return -ENODEV;
 
 	group = iommu_group_get_for_dev(dev);
diff --git a/drivers/iommu/virtio-iommu.c b/drivers/iommu/virtio-iommu.c
index cce329d..d5cac4f 100644
--- a/drivers/iommu/virtio-iommu.c
+++ b/drivers/iommu/virtio-iommu.c
@@ -466,7 +466,7 @@ static int viommu_probe_endpoint(struct viommu_dev *viommu, struct device *dev)
 	struct virtio_iommu_req_probe *probe;
 	struct virtio_iommu_probe_property *prop;
 	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
-	struct viommu_endpoint *vdev = fwspec->iommu_priv;
+	struct viommu_endpoint *vdev = dev_iommu_priv_get(dev);
 
 	if (!fwspec->num_ids)
 		return -EINVAL;
@@ -607,24 +607,36 @@ static struct iommu_domain *viommu_domain_alloc(unsigned type)
 	return &vdomain->domain;
 }
 
-static int viommu_domain_finalise(struct viommu_dev *viommu,
+static int viommu_domain_finalise(struct viommu_endpoint *vdev,
 				  struct iommu_domain *domain)
 {
 	int ret;
+	unsigned long viommu_page_size;
+	struct viommu_dev *viommu = vdev->viommu;
 	struct viommu_domain *vdomain = to_viommu_domain(domain);
 
-	vdomain->viommu		= viommu;
-	vdomain->map_flags	= viommu->map_flags;
+	viommu_page_size = 1UL << __ffs(viommu->pgsize_bitmap);
+	if (viommu_page_size > PAGE_SIZE) {
+		dev_err(vdev->dev,
+			"granule 0x%lx larger than system page size 0x%lx\n",
+			viommu_page_size, PAGE_SIZE);
+		return -EINVAL;
+	}
+
+	ret = ida_alloc_range(&viommu->domain_ids, viommu->first_domain,
+			      viommu->last_domain, GFP_KERNEL);
+	if (ret < 0)
+		return ret;
+
+	vdomain->id		= (unsigned int)ret;
 
 	domain->pgsize_bitmap	= viommu->pgsize_bitmap;
 	domain->geometry	= viommu->geometry;
 
-	ret = ida_alloc_range(&viommu->domain_ids, viommu->first_domain,
-			      viommu->last_domain, GFP_KERNEL);
-	if (ret >= 0)
-		vdomain->id = (unsigned int)ret;
+	vdomain->map_flags	= viommu->map_flags;
+	vdomain->viommu		= viommu;
 
-	return ret > 0 ? 0 : ret;
+	return 0;
 }
 
 static void viommu_domain_free(struct iommu_domain *domain)
@@ -648,7 +660,7 @@ static int viommu_attach_dev(struct iommu_domain *domain, struct device *dev)
 	int ret = 0;
 	struct virtio_iommu_req_attach req;
 	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
-	struct viommu_endpoint *vdev = fwspec->iommu_priv;
+	struct viommu_endpoint *vdev = dev_iommu_priv_get(dev);
 	struct viommu_domain *vdomain = to_viommu_domain(domain);
 
 	mutex_lock(&vdomain->mutex);
@@ -657,7 +669,7 @@ static int viommu_attach_dev(struct iommu_domain *domain, struct device *dev)
 		 * Properly initialize the domain now that we know which viommu
 		 * owns it.
 		 */
-		ret = viommu_domain_finalise(vdev->viommu, domain);
+		ret = viommu_domain_finalise(vdev, domain);
 	} else if (vdomain->viommu != vdev->viommu) {
 		dev_err(dev, "cannot attach to foreign vIOMMU\n");
 		ret = -EXDEV;
@@ -807,8 +819,7 @@ static void viommu_iotlb_sync(struct iommu_domain *domain,
 static void viommu_get_resv_regions(struct device *dev, struct list_head *head)
 {
 	struct iommu_resv_region *entry, *new_entry, *msi = NULL;
-	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
-	struct viommu_endpoint *vdev = fwspec->iommu_priv;
+	struct viommu_endpoint *vdev = dev_iommu_priv_get(dev);
 	int prot = IOMMU_WRITE | IOMMU_NOEXEC | IOMMU_MMIO;
 
 	list_for_each_entry(entry, &vdev->resv_regions, list) {
@@ -876,7 +887,7 @@ static int viommu_add_device(struct device *dev)
 	vdev->dev = dev;
 	vdev->viommu = viommu;
 	INIT_LIST_HEAD(&vdev->resv_regions);
-	fwspec->iommu_priv = vdev;
+	dev_iommu_priv_set(dev, vdev);
 
 	if (viommu->probe_size) {
 		/* Get additional information for this endpoint */
@@ -920,7 +931,7 @@ static void viommu_remove_device(struct device *dev)
 	if (!fwspec || fwspec->ops != &viommu_ops)
 		return;
 
-	vdev = fwspec->iommu_priv;
+	vdev = dev_iommu_priv_get(dev);
 
 	iommu_group_remove_device(dev);
 	iommu_device_unlink(&vdev->viommu->iommu, dev);
@@ -1082,7 +1093,6 @@ static int viommu_probe(struct virtio_device *vdev)
 
 #ifdef CONFIG_PCI
 	if (pci_bus_type.iommu_ops != &viommu_ops) {
-		pci_request_acs();
 		ret = bus_set_iommu(&pci_bus_type, &viommu_ops);
 		if (ret)
 			goto err_unregister;
diff --git a/drivers/irqchip/irq-bcm7038-l1.c b/drivers/irqchip/irq-bcm7038-l1.c
index eb9bce9..fd7c537 100644
--- a/drivers/irqchip/irq-bcm7038-l1.c
+++ b/drivers/irqchip/irq-bcm7038-l1.c
@@ -416,7 +416,7 @@ static const struct irq_domain_ops bcm7038_l1_domain_ops = {
 	.map			= bcm7038_l1_map,
 };
 
-int __init bcm7038_l1_of_init(struct device_node *dn,
+static int __init bcm7038_l1_of_init(struct device_node *dn,
 			      struct device_node *parent)
 {
 	struct bcm7038_l1_chip *intc;
diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index 54d142c..124251b 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -14,6 +14,7 @@
 #include <linux/dma-iommu.h>
 #include <linux/efi.h>
 #include <linux/interrupt.h>
+#include <linux/iopoll.h>
 #include <linux/irqdomain.h>
 #include <linux/list.h>
 #include <linux/log2.h>
@@ -3672,6 +3673,20 @@ static int its_vpe_set_affinity(struct irq_data *d,
 	return IRQ_SET_MASK_OK_DONE;
 }
 
+static void its_wait_vpt_parse_complete(void)
+{
+	void __iomem *vlpi_base = gic_data_rdist_vlpi_base();
+	u64 val;
+
+	if (!gic_rdists->has_vpend_valid_dirty)
+		return;
+
+	WARN_ON_ONCE(readq_relaxed_poll_timeout(vlpi_base + GICR_VPENDBASER,
+						val,
+						!(val & GICR_VPENDBASER_Dirty),
+						10, 500));
+}
+
 static void its_vpe_schedule(struct its_vpe *vpe)
 {
 	void __iomem *vlpi_base = gic_data_rdist_vlpi_base();
@@ -3702,6 +3717,8 @@ static void its_vpe_schedule(struct its_vpe *vpe)
 	val |= vpe->idai ? GICR_VPENDBASER_IDAI : 0;
 	val |= GICR_VPENDBASER_Valid;
 	gicr_write_vpendbaser(val, vlpi_base + GICR_VPENDBASER);
+
+	its_wait_vpt_parse_complete();
 }
 
 static void its_vpe_deschedule(struct its_vpe *vpe)
@@ -3910,6 +3927,8 @@ static void its_vpe_4_1_schedule(struct its_vpe *vpe,
 	val |= FIELD_PREP(GICR_VPENDBASER_4_1_VPEID, vpe->vpe_id);
 
 	gicr_write_vpendbaser(val, vlpi_base + GICR_VPENDBASER);
+
+	its_wait_vpt_parse_complete();
 }
 
 static void its_vpe_4_1_deschedule(struct its_vpe *vpe,
@@ -4035,6 +4054,7 @@ static int its_sgi_set_affinity(struct irq_data *d,
 	 * not on the host (since they can only be targetting a vPE).
 	 * Tell the kernel we've done whatever it asked for.
 	 */
+	irq_data_update_effective_affinity(d, mask_val);
 	return IRQ_SET_MASK_OK;
 }
 
diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
index 9dbc81b6..d7006ef 100644
--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -873,6 +873,7 @@ static int __gic_update_rdist_properties(struct redist_region *region,
 	gic_data.rdists.has_rvpeid &= !!(typer & GICR_TYPER_RVPEID);
 	gic_data.rdists.has_direct_lpi &= (!!(typer & GICR_TYPER_DirectLPIS) |
 					   gic_data.rdists.has_rvpeid);
+	gic_data.rdists.has_vpend_valid_dirty &= !!(typer & GICR_TYPER_DIRTY);
 
 	/* Detect non-sensical configurations */
 	if (WARN_ON_ONCE(gic_data.rdists.has_rvpeid && !gic_data.rdists.has_vlpis)) {
@@ -893,10 +894,11 @@ static void gic_update_rdist_properties(void)
 	if (WARN_ON(gic_data.ppi_nr == UINT_MAX))
 		gic_data.ppi_nr = 0;
 	pr_info("%d PPIs implemented\n", gic_data.ppi_nr);
-	pr_info("%sVLPI support, %sdirect LPI support, %sRVPEID support\n",
-		!gic_data.rdists.has_vlpis ? "no " : "",
-		!gic_data.rdists.has_direct_lpi ? "no " : "",
-		!gic_data.rdists.has_rvpeid ? "no " : "");
+	if (gic_data.rdists.has_vlpis)
+		pr_info("GICv4 features: %s%s%s\n",
+			gic_data.rdists.has_direct_lpi ? "DirectLPI " : "",
+			gic_data.rdists.has_rvpeid ? "RVPEID " : "",
+			gic_data.rdists.has_vpend_valid_dirty ? "Valid+Dirty " : "");
 }
 
 /* Check whether it's single security state view */
@@ -1620,6 +1622,7 @@ static int __init gic_init_bases(void __iomem *dist_base,
 	gic_data.rdists.has_rvpeid = true;
 	gic_data.rdists.has_vlpis = true;
 	gic_data.rdists.has_direct_lpi = true;
+	gic_data.rdists.has_vpend_valid_dirty = true;
 
 	if (WARN_ON(!gic_data.domain) || WARN_ON(!gic_data.rdists.rdist)) {
 		err = -ENOMEM;
diff --git a/drivers/irqchip/irq-mbigen.c b/drivers/irqchip/irq-mbigen.c
index 6b566bb..ff7627b 100644
--- a/drivers/irqchip/irq-mbigen.c
+++ b/drivers/irqchip/irq-mbigen.c
@@ -220,10 +220,16 @@ static int mbigen_irq_domain_alloc(struct irq_domain *domain,
 	return 0;
 }
 
+static void mbigen_irq_domain_free(struct irq_domain *domain, unsigned int virq,
+				   unsigned int nr_irqs)
+{
+	platform_msi_domain_free(domain, virq, nr_irqs);
+}
+
 static const struct irq_domain_ops mbigen_domain_ops = {
 	.translate	= mbigen_domain_translate,
 	.alloc		= mbigen_irq_domain_alloc,
-	.free		= irq_domain_free_irqs_common,
+	.free		= mbigen_irq_domain_free,
 };
 
 static int mbigen_of_create_domain(struct platform_device *pdev,
diff --git a/drivers/irqchip/irq-meson-gpio.c b/drivers/irqchip/irq-meson-gpio.c
index ccc7f82..bc7aebc 100644
--- a/drivers/irqchip/irq-meson-gpio.c
+++ b/drivers/irqchip/irq-meson-gpio.c
@@ -144,12 +144,17 @@ struct meson_gpio_irq_controller {
 static void meson_gpio_irq_update_bits(struct meson_gpio_irq_controller *ctl,
 				       unsigned int reg, u32 mask, u32 val)
 {
+	unsigned long flags;
 	u32 tmp;
 
+	spin_lock_irqsave(&ctl->lock, flags);
+
 	tmp = readl_relaxed(ctl->base + reg);
 	tmp &= ~mask;
 	tmp |= val;
 	writel_relaxed(tmp, ctl->base + reg);
+
+	spin_unlock_irqrestore(&ctl->lock, flags);
 }
 
 static void meson_gpio_irq_init_dummy(struct meson_gpio_irq_controller *ctl)
@@ -196,14 +201,15 @@ meson_gpio_irq_request_channel(struct meson_gpio_irq_controller *ctl,
 			       unsigned long  hwirq,
 			       u32 **channel_hwirq)
 {
+	unsigned long flags;
 	unsigned int idx;
 
-	spin_lock(&ctl->lock);
+	spin_lock_irqsave(&ctl->lock, flags);
 
 	/* Find a free channel */
 	idx = find_first_zero_bit(ctl->channel_map, NUM_CHANNEL);
 	if (idx >= NUM_CHANNEL) {
-		spin_unlock(&ctl->lock);
+		spin_unlock_irqrestore(&ctl->lock, flags);
 		pr_err("No channel available\n");
 		return -ENOSPC;
 	}
@@ -211,6 +217,8 @@ meson_gpio_irq_request_channel(struct meson_gpio_irq_controller *ctl,
 	/* Mark the channel as used */
 	set_bit(idx, ctl->channel_map);
 
+	spin_unlock_irqrestore(&ctl->lock, flags);
+
 	/*
 	 * Setup the mux of the channel to route the signal of the pad
 	 * to the appropriate input of the GIC
@@ -225,8 +233,6 @@ meson_gpio_irq_request_channel(struct meson_gpio_irq_controller *ctl,
 	 */
 	*channel_hwirq = &(ctl->channel_irqs[idx]);
 
-	spin_unlock(&ctl->lock);
-
 	pr_debug("hwirq %lu assigned to channel %d - irq %u\n",
 		 hwirq, idx, **channel_hwirq);
 
@@ -287,13 +293,9 @@ static int meson_gpio_irq_type_setup(struct meson_gpio_irq_controller *ctl,
 			val |= REG_EDGE_POL_LOW(params, idx);
 	}
 
-	spin_lock(&ctl->lock);
-
 	meson_gpio_irq_update_bits(ctl, REG_EDGE_POL,
 				   REG_EDGE_POL_MASK(params, idx), val);
 
-	spin_unlock(&ctl->lock);
-
 	return 0;
 }
 
diff --git a/drivers/irqchip/irq-mvebu-icu.c b/drivers/irqchip/irq-mvebu-icu.c
index 547045d..91adf77 100644
--- a/drivers/irqchip/irq-mvebu-icu.c
+++ b/drivers/irqchip/irq-mvebu-icu.c
@@ -66,7 +66,7 @@ struct mvebu_icu_irq_data {
 	unsigned int type;
 };
 
-DEFINE_STATIC_KEY_FALSE(legacy_bindings);
+static DEFINE_STATIC_KEY_FALSE(legacy_bindings);
 
 static void mvebu_icu_init(struct mvebu_icu *icu,
 			   struct mvebu_icu_msi_data *msi_data,
diff --git a/drivers/irqchip/irq-sifive-plic.c b/drivers/irqchip/irq-sifive-plic.c
index c34fb3a..d0a71fe 100644
--- a/drivers/irqchip/irq-sifive-plic.c
+++ b/drivers/irqchip/irq-sifive-plic.c
@@ -56,7 +56,7 @@
 #define     CONTEXT_THRESHOLD		0x00
 #define     CONTEXT_CLAIM		0x04
 
-#define	PLIC_DISABLE_THRESHOLD		0xf
+#define	PLIC_DISABLE_THRESHOLD		0x7
 #define	PLIC_ENABLE_THRESHOLD		0
 
 struct plic_priv {
diff --git a/drivers/irqchip/irq-ti-sci-inta.c b/drivers/irqchip/irq-ti-sci-inta.c
index 8f6e6b0..7e3ebf6 100644
--- a/drivers/irqchip/irq-ti-sci-inta.c
+++ b/drivers/irqchip/irq-ti-sci-inta.c
@@ -37,6 +37,7 @@
 #define VINT_ENABLE_SET_OFFSET	0x0
 #define VINT_ENABLE_CLR_OFFSET	0x8
 #define VINT_STATUS_OFFSET	0x18
+#define VINT_STATUS_MASKED_OFFSET	0x20
 
 /**
  * struct ti_sci_inta_event_desc - Description of an event coming to
@@ -116,7 +117,7 @@ static void ti_sci_inta_irq_handler(struct irq_desc *desc)
 	chained_irq_enter(irq_desc_get_chip(desc), desc);
 
 	val = readq_relaxed(inta->base + vint_desc->vint_id * 0x1000 +
-			    VINT_STATUS_OFFSET);
+			    VINT_STATUS_MASKED_OFFSET);
 
 	for_each_set_bit(bit, &val, MAX_EVENTS_PER_VINT) {
 		virq = irq_find_mapping(domain, vint_desc->events[bit].hwirq);
diff --git a/drivers/irqchip/irq-xilinx-intc.c b/drivers/irqchip/irq-xilinx-intc.c
index 7f811fe..1d3d273 100644
--- a/drivers/irqchip/irq-xilinx-intc.c
+++ b/drivers/irqchip/irq-xilinx-intc.c
@@ -124,6 +124,20 @@ static unsigned int xintc_get_irq_local(struct xintc_irq_chip *irqc)
 	return irq;
 }
 
+unsigned int xintc_get_irq(void)
+{
+	unsigned int irq = -1;
+	u32 hwirq;
+
+	hwirq = xintc_read(primary_intc, IVR);
+	if (hwirq != -1U)
+		irq = irq_find_mapping(primary_intc->root_domain, hwirq);
+
+	pr_debug("irq-xilinx: hwirq=%d, irq=%d\n", hwirq, irq);
+
+	return irq;
+}
+
 static int xintc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
 {
 	struct xintc_irq_chip *irqc = d->host_data;
@@ -163,25 +177,6 @@ static void xil_intc_irq_handler(struct irq_desc *desc)
 	chained_irq_exit(chip, desc);
 }
 
-static void xil_intc_handle_irq(struct pt_regs *regs)
-{
-	u32 hwirq;
-	struct xintc_irq_chip *irqc = primary_intc;
-
-	do {
-		hwirq = xintc_read(irqc, IVR);
-		if (likely(hwirq != -1U)) {
-			int ret;
-
-			ret = handle_domain_irq(irqc->root_domain, hwirq, regs);
-			WARN_ONCE(ret, "Unhandled HWIRQ %d\n", hwirq);
-			continue;
-		}
-
-		break;
-	} while (1);
-}
-
 static int __init xilinx_intc_of_init(struct device_node *intc,
 					     struct device_node *parent)
 {
@@ -250,7 +245,7 @@ static int __init xilinx_intc_of_init(struct device_node *intc,
 		}
 	} else {
 		primary_intc = irqc;
-		set_handle_irq(xil_intc_handle_irq);
+		irq_set_default_host(primary_intc->root_domain);
 	}
 
 	return 0;
diff --git a/drivers/isdn/hardware/mISDN/mISDNisar.c b/drivers/isdn/hardware/mISDN/mISDNisar.c
index e325e87..11e8c7d 100644
--- a/drivers/isdn/hardware/mISDN/mISDNisar.c
+++ b/drivers/isdn/hardware/mISDN/mISDNisar.c
@@ -743,10 +743,10 @@ check_send(struct isar_hw *isar, u8 rdm)
 	}
 }
 
-const char *dmril[] = {"NO SPEED", "1200/75", "NODEF2", "75/1200", "NODEF4",
+static const char *dmril[] = {"NO SPEED", "1200/75", "NODEF2", "75/1200", "NODEF4",
 		       "300", "600", "1200", "2400", "4800", "7200",
 		       "9600nt", "9600t", "12000", "14400", "WRONG"};
-const char *dmrim[] = {"NO MOD", "NO DEF", "V32/V32b", "V22", "V21",
+static const char *dmrim[] = {"NO MOD", "NO DEF", "V32/V32b", "V22", "V21",
 		       "Bell103", "V23", "Bell202", "V17", "V29", "V27ter"};
 
 static void
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index d82f1de..c664d84 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -846,6 +846,17 @@
 	  It is a single boost converter primarily for white LEDs and
 	  audio amplifiers.
 
+config LEDS_IP30
+	tristate "LED support for SGI Octane machines"
+	depends on LEDS_CLASS
+	depends on SGI_MFD_IOC3
+	help
+	  This option enables support for the Red and White LEDs of
+	  SGI Octane machines.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called leds-ip30.
+
 comment "LED Triggers"
 source "drivers/leds/trigger/Kconfig"
 
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index d7e1107..45235d5 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -6,91 +6,92 @@
 obj-$(CONFIG_LEDS_CLASS_FLASH)		+= led-class-flash.o
 obj-$(CONFIG_LEDS_TRIGGERS)		+= led-triggers.o
 
-# LED Platform Drivers
+# LED Platform Drivers (keep this sorted, M-| sort)
 obj-$(CONFIG_LEDS_88PM860X)		+= leds-88pm860x.o
 obj-$(CONFIG_LEDS_AAT1290)		+= leds-aat1290.o
+obj-$(CONFIG_LEDS_ADP5520)		+= leds-adp5520.o
+obj-$(CONFIG_LEDS_AN30259A)		+= leds-an30259a.o
 obj-$(CONFIG_LEDS_APU)			+= leds-apu.o
 obj-$(CONFIG_LEDS_AS3645A)		+= leds-as3645a.o
-obj-$(CONFIG_LEDS_AN30259A)		+= leds-an30259a.o
+obj-$(CONFIG_LEDS_ASIC3)		+= leds-asic3.o
 obj-$(CONFIG_LEDS_BCM6328)		+= leds-bcm6328.o
 obj-$(CONFIG_LEDS_BCM6358)		+= leds-bcm6358.o
 obj-$(CONFIG_LEDS_BD2802)		+= leds-bd2802.o
+obj-$(CONFIG_LEDS_BLINKM)		+= leds-blinkm.o
+obj-$(CONFIG_LEDS_CLEVO_MAIL)		+= leds-clevo-mail.o
+obj-$(CONFIG_LEDS_COBALT_QUBE)		+= leds-cobalt-qube.o
+obj-$(CONFIG_LEDS_COBALT_RAQ)		+= leds-cobalt-raq.o
 obj-$(CONFIG_LEDS_CPCAP)		+= leds-cpcap.o
-obj-$(CONFIG_LEDS_LOCOMO)		+= leds-locomo.o
+obj-$(CONFIG_LEDS_DA903X)		+= leds-da903x.o
+obj-$(CONFIG_LEDS_DA9052)		+= leds-da9052.o
+obj-$(CONFIG_LEDS_FSG)			+= leds-fsg.o
+obj-$(CONFIG_LEDS_GPIO)			+= leds-gpio.o
+obj-$(CONFIG_LEDS_GPIO_REGISTER)	+= leds-gpio-register.o
+obj-$(CONFIG_LEDS_HP6XX)		+= leds-hp6xx.o
+obj-$(CONFIG_LEDS_INTEL_SS4200)		+= leds-ss4200.o
+obj-$(CONFIG_LEDS_IP30)			+= leds-ip30.o
+obj-$(CONFIG_LEDS_IPAQ_MICRO)		+= leds-ipaq-micro.o
+obj-$(CONFIG_LEDS_IS31FL319X)		+= leds-is31fl319x.o
+obj-$(CONFIG_LEDS_IS31FL32XX)		+= leds-is31fl32xx.o
+obj-$(CONFIG_LEDS_KTD2692)		+= leds-ktd2692.o
 obj-$(CONFIG_LEDS_LM3530)		+= leds-lm3530.o
 obj-$(CONFIG_LEDS_LM3532)		+= leds-lm3532.o
 obj-$(CONFIG_LEDS_LM3533)		+= leds-lm3533.o
+obj-$(CONFIG_LEDS_LM355x)		+= leds-lm355x.o
+obj-$(CONFIG_LEDS_LM3601X)		+= leds-lm3601x.o
+obj-$(CONFIG_LEDS_LM36274)		+= leds-lm36274.o
 obj-$(CONFIG_LEDS_LM3642)		+= leds-lm3642.o
-obj-$(CONFIG_LEDS_MIKROTIK_RB532)	+= leds-rb532.o
-obj-$(CONFIG_LEDS_S3C24XX)		+= leds-s3c24xx.o
-obj-$(CONFIG_LEDS_NET48XX)		+= leds-net48xx.o
-obj-$(CONFIG_LEDS_WRAP)			+= leds-wrap.o
-obj-$(CONFIG_LEDS_COBALT_QUBE)		+= leds-cobalt-qube.o
-obj-$(CONFIG_LEDS_COBALT_RAQ)		+= leds-cobalt-raq.o
-obj-$(CONFIG_LEDS_SUNFIRE)		+= leds-sunfire.o
-obj-$(CONFIG_LEDS_PCA9532)		+= leds-pca9532.o
-obj-$(CONFIG_LEDS_GPIO_REGISTER)	+= leds-gpio-register.o
-obj-$(CONFIG_LEDS_GPIO)			+= leds-gpio.o
+obj-$(CONFIG_LEDS_LM3692X)		+= leds-lm3692x.o
+obj-$(CONFIG_LEDS_LM3697)		+= leds-lm3697.o
+obj-$(CONFIG_LEDS_LOCOMO)		+= leds-locomo.o
 obj-$(CONFIG_LEDS_LP3944)		+= leds-lp3944.o
 obj-$(CONFIG_LEDS_LP3952)		+= leds-lp3952.o
-obj-$(CONFIG_LEDS_LP55XX_COMMON)	+= leds-lp55xx-common.o
 obj-$(CONFIG_LEDS_LP5521)		+= leds-lp5521.o
 obj-$(CONFIG_LEDS_LP5523)		+= leds-lp5523.o
 obj-$(CONFIG_LEDS_LP5562)		+= leds-lp5562.o
+obj-$(CONFIG_LEDS_LP55XX_COMMON)	+= leds-lp55xx-common.o
 obj-$(CONFIG_LEDS_LP8501)		+= leds-lp8501.o
 obj-$(CONFIG_LEDS_LP8788)		+= leds-lp8788.o
 obj-$(CONFIG_LEDS_LP8860)		+= leds-lp8860.o
-obj-$(CONFIG_LEDS_TCA6507)		+= leds-tca6507.o
-obj-$(CONFIG_LEDS_TLC591XX)		+= leds-tlc591xx.o
-obj-$(CONFIG_LEDS_CLEVO_MAIL)		+= leds-clevo-mail.o
-obj-$(CONFIG_LEDS_IPAQ_MICRO)		+= leds-ipaq-micro.o
-obj-$(CONFIG_LEDS_HP6XX)		+= leds-hp6xx.o
-obj-$(CONFIG_LEDS_OT200)		+= leds-ot200.o
-obj-$(CONFIG_LEDS_FSG)			+= leds-fsg.o
-obj-$(CONFIG_LEDS_PCA955X)		+= leds-pca955x.o
-obj-$(CONFIG_LEDS_PCA963X)		+= leds-pca963x.o
-obj-$(CONFIG_LEDS_DA903X)		+= leds-da903x.o
-obj-$(CONFIG_LEDS_DA9052)		+= leds-da9052.o
-obj-$(CONFIG_LEDS_WM831X_STATUS)	+= leds-wm831x-status.o
-obj-$(CONFIG_LEDS_WM8350)		+= leds-wm8350.o
-obj-$(CONFIG_LEDS_PWM)			+= leds-pwm.o
-obj-$(CONFIG_LEDS_REGULATOR)		+= leds-regulator.o
-obj-$(CONFIG_LEDS_INTEL_SS4200)		+= leds-ss4200.o
 obj-$(CONFIG_LEDS_LT3593)		+= leds-lt3593.o
-obj-$(CONFIG_LEDS_ADP5520)		+= leds-adp5520.o
-obj-$(CONFIG_LEDS_MC13783)		+= leds-mc13783.o
-obj-$(CONFIG_LEDS_NS2)			+= leds-ns2.o
-obj-$(CONFIG_LEDS_NETXBIG)		+= leds-netxbig.o
-obj-$(CONFIG_LEDS_ASIC3)		+= leds-asic3.o
 obj-$(CONFIG_LEDS_MAX77650)		+= leds-max77650.o
 obj-$(CONFIG_LEDS_MAX77693)		+= leds-max77693.o
 obj-$(CONFIG_LEDS_MAX8997)		+= leds-max8997.o
-obj-$(CONFIG_LEDS_LM355x)		+= leds-lm355x.o
-obj-$(CONFIG_LEDS_BLINKM)		+= leds-blinkm.o
-obj-$(CONFIG_LEDS_SYSCON)		+= leds-syscon.o
+obj-$(CONFIG_LEDS_MC13783)		+= leds-mc13783.o
 obj-$(CONFIG_LEDS_MENF21BMC)		+= leds-menf21bmc.o
-obj-$(CONFIG_LEDS_KTD2692)		+= leds-ktd2692.o
-obj-$(CONFIG_LEDS_POWERNV)		+= leds-powernv.o
-obj-$(CONFIG_LEDS_IS31FL319X)		+= leds-is31fl319x.o
-obj-$(CONFIG_LEDS_IS31FL32XX)		+= leds-is31fl32xx.o
-obj-$(CONFIG_LEDS_PM8058)		+= leds-pm8058.o
+obj-$(CONFIG_LEDS_MIKROTIK_RB532)	+= leds-rb532.o
 obj-$(CONFIG_LEDS_MLXCPLD)		+= leds-mlxcpld.o
 obj-$(CONFIG_LEDS_MLXREG)		+= leds-mlxreg.o
-obj-$(CONFIG_LEDS_NIC78BX)		+= leds-nic78bx.o
-obj-$(CONFIG_LEDS_SPI_BYTE)		+= leds-spi-byte.o
 obj-$(CONFIG_LEDS_MT6323)		+= leds-mt6323.o
-obj-$(CONFIG_LEDS_LM3692X)		+= leds-lm3692x.o
+obj-$(CONFIG_LEDS_NET48XX)		+= leds-net48xx.o
+obj-$(CONFIG_LEDS_NETXBIG)		+= leds-netxbig.o
+obj-$(CONFIG_LEDS_NIC78BX)		+= leds-nic78bx.o
+obj-$(CONFIG_LEDS_NS2)			+= leds-ns2.o
+obj-$(CONFIG_LEDS_OT200)		+= leds-ot200.o
+obj-$(CONFIG_LEDS_PCA9532)		+= leds-pca9532.o
+obj-$(CONFIG_LEDS_PCA955X)		+= leds-pca955x.o
+obj-$(CONFIG_LEDS_PCA963X)		+= leds-pca963x.o
+obj-$(CONFIG_LEDS_PM8058)		+= leds-pm8058.o
+obj-$(CONFIG_LEDS_POWERNV)		+= leds-powernv.o
+obj-$(CONFIG_LEDS_PWM)			+= leds-pwm.o
+obj-$(CONFIG_LEDS_REGULATOR)		+= leds-regulator.o
+obj-$(CONFIG_LEDS_S3C24XX)		+= leds-s3c24xx.o
 obj-$(CONFIG_LEDS_SC27XX_BLTC)		+= leds-sc27xx-bltc.o
-obj-$(CONFIG_LEDS_LM3601X)		+= leds-lm3601x.o
+obj-$(CONFIG_LEDS_SUNFIRE)		+= leds-sunfire.o
+obj-$(CONFIG_LEDS_SYSCON)		+= leds-syscon.o
+obj-$(CONFIG_LEDS_TCA6507)		+= leds-tca6507.o
 obj-$(CONFIG_LEDS_TI_LMU_COMMON)	+= leds-ti-lmu-common.o
-obj-$(CONFIG_LEDS_LM3697)		+= leds-lm3697.o
-obj-$(CONFIG_LEDS_LM36274)		+= leds-lm36274.o
+obj-$(CONFIG_LEDS_TLC591XX)		+= leds-tlc591xx.o
 obj-$(CONFIG_LEDS_TPS6105X)		+= leds-tps6105x.o
+obj-$(CONFIG_LEDS_WM831X_STATUS)	+= leds-wm831x-status.o
+obj-$(CONFIG_LEDS_WM8350)		+= leds-wm8350.o
+obj-$(CONFIG_LEDS_WRAP)			+= leds-wrap.o
 
 # LED SPI Drivers
 obj-$(CONFIG_LEDS_CR0014114)		+= leds-cr0014114.o
 obj-$(CONFIG_LEDS_DAC124S085)		+= leds-dac124s085.o
 obj-$(CONFIG_LEDS_EL15203000)		+= leds-el15203000.o
+obj-$(CONFIG_LEDS_SPI_BYTE)		+= leds-spi-byte.o
 
 # LED Userspace Drivers
 obj-$(CONFIG_LEDS_USER)			+= uleds.o
diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
index 1fc40e8..3363a65 100644
--- a/drivers/leds/led-class.c
+++ b/drivers/leds/led-class.c
@@ -376,7 +376,7 @@ int led_classdev_register_ext(struct device *parent,
 
 	if (ret)
 		dev_warn(parent, "Led %s renamed to %s due to name collision",
-				led_cdev->name, dev_name(led_cdev->dev));
+				proposed_name, dev_name(led_cdev->dev));
 
 	if (led_cdev->flags & LED_BRIGHT_HW_CHANGED) {
 		ret = led_add_brightness_hw_changed(led_cdev);
diff --git a/drivers/leds/leds-bd2802.c b/drivers/leds/leds-bd2802.c
index bd61a82..8bbaef5 100644
--- a/drivers/leds/leds-bd2802.c
+++ b/drivers/leds/leds-bd2802.c
@@ -660,7 +660,6 @@ static int bd2802_probe(struct i2c_client *client,
 			const struct i2c_device_id *id)
 {
 	struct bd2802_led *led;
-	struct bd2802_led_platform_data *pdata;
 	int ret, i;
 
 	led = devm_kzalloc(&client->dev, sizeof(struct bd2802_led), GFP_KERNEL);
@@ -668,7 +667,6 @@ static int bd2802_probe(struct i2c_client *client,
 		return -ENOMEM;
 
 	led->client = client;
-	pdata = led->pdata = dev_get_platdata(&client->dev);
 	i2c_set_clientdata(client, led);
 
 	/*
diff --git a/drivers/leds/leds-ip30.c b/drivers/leds/leds-ip30.c
new file mode 100644
index 0000000..d4ec736
--- /dev/null
+++ b/drivers/leds/leds-ip30.c
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * LED Driver for SGI Octane machines
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+
+#define IP30_LED_SYSTEM	0
+#define IP30_LED_FAULT	1
+
+struct ip30_led {
+	struct led_classdev cdev;
+	u32 __iomem *reg;
+};
+
+static void ip30led_set(struct led_classdev *led_cdev,
+			enum led_brightness value)
+{
+	struct ip30_led *led = container_of(led_cdev, struct ip30_led, cdev);
+
+	writel(value, led->reg);
+}
+
+static int ip30led_create(struct platform_device *pdev, int num)
+{
+	struct resource *res;
+	struct ip30_led *data;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, num);
+	if (!res)
+		return -EBUSY;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->reg = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(data->reg))
+		return PTR_ERR(data->reg);
+
+
+	switch (num) {
+	case IP30_LED_SYSTEM:
+		data->cdev.name = "white:power";
+		break;
+	case IP30_LED_FAULT:
+		data->cdev.name = "red:fault";
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	data->cdev.brightness = readl(data->reg);
+	data->cdev.max_brightness = 1;
+	data->cdev.brightness_set = ip30led_set;
+
+	return devm_led_classdev_register(&pdev->dev, &data->cdev);
+}
+
+static int ip30led_probe(struct platform_device *pdev)
+{
+	int ret;
+
+	ret = ip30led_create(pdev, IP30_LED_SYSTEM);
+	if (ret < 0)
+		return ret;
+
+	return ip30led_create(pdev, IP30_LED_FAULT);
+}
+
+static struct platform_driver ip30led_driver = {
+	.probe		= ip30led_probe,
+	.driver		= {
+		.name		= "ip30-leds",
+	},
+};
+
+module_platform_driver(ip30led_driver);
+
+MODULE_AUTHOR("Thomas Bogendoerfer <tbogendoerfer@suse.de>");
+MODULE_DESCRIPTION("SGI Octane LED driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ip30-leds");
diff --git a/drivers/leds/leds-is31fl32xx.c b/drivers/leds/leds-is31fl32xx.c
index 6f29b89..cd768f9 100644
--- a/drivers/leds/leds-is31fl32xx.c
+++ b/drivers/leds/leds-is31fl32xx.c
@@ -44,7 +44,7 @@ struct is31fl32xx_priv {
 	const struct is31fl32xx_chipdef *cdef;
 	struct i2c_client *client;
 	unsigned int num_leds;
-	struct is31fl32xx_led_data leds[0];
+	struct is31fl32xx_led_data leds[];
 };
 
 /**
diff --git a/drivers/leds/leds-lm3532.c b/drivers/leds/leds-lm3532.c
index 188a57d..aa9bf8c 100644
--- a/drivers/leds/leds-lm3532.c
+++ b/drivers/leds/leds-lm3532.c
@@ -140,7 +140,7 @@ struct lm3532_led {
 	int ctrl_brt_pointer;
 	int num_leds;
 	int full_scale_current;
-	int enabled:1;
+	unsigned int enabled:1;
 	u32 led_strings[LM3532_MAX_CONTROL_BANKS];
 	char label[LED_MAX_NAME_SIZE];
 };
diff --git a/drivers/leds/leds-lm3697.c b/drivers/leds/leds-lm3697.c
index b71711a..872d26f 100644
--- a/drivers/leds/leds-lm3697.c
+++ b/drivers/leds/leds-lm3697.c
@@ -246,7 +246,7 @@ static int lm3697_probe_dt(struct lm3697 *priv)
 
 		led->num_leds = fwnode_property_count_u32(child, "led-sources");
 		if (led->num_leds > LM3697_MAX_LED_STRINGS) {
-			dev_err(&priv->client->dev, "To many LED strings defined\n");
+			dev_err(&priv->client->dev, "Too many LED strings defined\n");
 			continue;
 		}
 
diff --git a/drivers/leds/leds-ns2.c b/drivers/leds/leds-ns2.c
index 7c500df..538ca57 100644
--- a/drivers/leds/leds-ns2.c
+++ b/drivers/leds/leds-ns2.c
@@ -12,14 +12,38 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/leds.h>
 #include <linux/module.h>
-#include <linux/platform_data/leds-kirkwood-ns2.h>
 #include <linux/of.h>
-#include <linux/of_gpio.h>
 #include "leds.h"
 
+enum ns2_led_modes {
+	NS_V2_LED_OFF,
+	NS_V2_LED_ON,
+	NS_V2_LED_SATA,
+};
+
+struct ns2_led_modval {
+	enum ns2_led_modes	mode;
+	int			cmd_level;
+	int			slow_level;
+};
+
+struct ns2_led {
+	const char	*name;
+	const char	*default_trigger;
+	struct gpio_desc *cmd;
+	struct gpio_desc *slow;
+	int		num_modes;
+	struct ns2_led_modval *modval;
+};
+
+struct ns2_led_platform_data {
+	int		num_leds;
+	struct ns2_led	*leds;
+};
+
 /*
  * The Network Space v2 dual-GPIO LED is wired to a CPLD. Three different LED
  * modes are available: off, on and SATA activity blinking. The LED modes are
@@ -29,8 +53,8 @@
 
 struct ns2_led_data {
 	struct led_classdev	cdev;
-	unsigned int		cmd;
-	unsigned int		slow;
+	struct gpio_desc	*cmd;
+	struct gpio_desc	*slow;
 	bool			can_sleep;
 	unsigned char		sata; /* True when SATA mode active. */
 	rwlock_t		rw_lock; /* Lock GPIOs. */
@@ -46,8 +70,8 @@ static int ns2_led_get_mode(struct ns2_led_data *led_dat,
 	int cmd_level;
 	int slow_level;
 
-	cmd_level = gpio_get_value_cansleep(led_dat->cmd);
-	slow_level = gpio_get_value_cansleep(led_dat->slow);
+	cmd_level = gpiod_get_value_cansleep(led_dat->cmd);
+	slow_level = gpiod_get_value_cansleep(led_dat->slow);
 
 	for (i = 0; i < led_dat->num_modes; i++) {
 		if (cmd_level == led_dat->modval[i].cmd_level &&
@@ -80,15 +104,15 @@ static void ns2_led_set_mode(struct ns2_led_data *led_dat,
 	write_lock_irqsave(&led_dat->rw_lock, flags);
 
 	if (!led_dat->can_sleep) {
-		gpio_set_value(led_dat->cmd,
-			       led_dat->modval[i].cmd_level);
-		gpio_set_value(led_dat->slow,
-			       led_dat->modval[i].slow_level);
+		gpiod_set_value(led_dat->cmd,
+				led_dat->modval[i].cmd_level);
+		gpiod_set_value(led_dat->slow,
+				led_dat->modval[i].slow_level);
 		goto exit_unlock;
 	}
 
-	gpio_set_value_cansleep(led_dat->cmd, led_dat->modval[i].cmd_level);
-	gpio_set_value_cansleep(led_dat->slow, led_dat->modval[i].slow_level);
+	gpiod_set_value_cansleep(led_dat->cmd, led_dat->modval[i].cmd_level);
+	gpiod_set_value_cansleep(led_dat->slow, led_dat->modval[i].slow_level);
 
 exit_unlock:
 	write_unlock_irqrestore(&led_dat->rw_lock, flags);
@@ -176,26 +200,6 @@ create_ns2_led(struct platform_device *pdev, struct ns2_led_data *led_dat,
 	int ret;
 	enum ns2_led_modes mode;
 
-	ret = devm_gpio_request_one(&pdev->dev, template->cmd,
-			gpio_get_value_cansleep(template->cmd) ?
-			GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
-			template->name);
-	if (ret) {
-		dev_err(&pdev->dev, "%s: failed to setup command GPIO\n",
-			template->name);
-		return ret;
-	}
-
-	ret = devm_gpio_request_one(&pdev->dev, template->slow,
-			gpio_get_value_cansleep(template->slow) ?
-			GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
-			template->name);
-	if (ret) {
-		dev_err(&pdev->dev, "%s: failed to setup slow GPIO\n",
-			template->name);
-		return ret;
-	}
-
 	rwlock_init(&led_dat->rw_lock);
 
 	led_dat->cdev.name = template->name;
@@ -205,8 +209,8 @@ create_ns2_led(struct platform_device *pdev, struct ns2_led_data *led_dat,
 	led_dat->cdev.groups = ns2_led_groups;
 	led_dat->cmd = template->cmd;
 	led_dat->slow = template->slow;
-	led_dat->can_sleep = gpio_cansleep(led_dat->cmd) |
-				gpio_cansleep(led_dat->slow);
+	led_dat->can_sleep = gpiod_cansleep(led_dat->cmd) |
+				gpiod_cansleep(led_dat->slow);
 	if (led_dat->can_sleep)
 		led_dat->cdev.brightness_set_blocking = ns2_led_set_blocking;
 	else
@@ -261,17 +265,26 @@ ns2_leds_get_of_pdata(struct device *dev, struct ns2_led_platform_data *pdata)
 		const char *string;
 		int i, num_modes;
 		struct ns2_led_modval *modval;
+		struct gpio_desc *gd;
 
-		ret = of_get_named_gpio(child, "cmd-gpio", 0);
-		if (ret < 0)
-			goto err_node_put;
-		led->cmd = ret;
-		ret = of_get_named_gpio(child, "slow-gpio", 0);
-		if (ret < 0)
-			goto err_node_put;
-		led->slow = ret;
 		ret = of_property_read_string(child, "label", &string);
 		led->name = (ret == 0) ? string : child->name;
+
+		gd = gpiod_get_from_of_node(child, "cmd-gpio", 0,
+					    GPIOD_ASIS, led->name);
+		if (IS_ERR(gd)) {
+			ret = PTR_ERR(gd);
+			goto err_node_put;
+		}
+		led->cmd = gd;
+		gd = gpiod_get_from_of_node(child, "slow-gpio", 0,
+					    GPIOD_ASIS, led->name);
+		if (IS_ERR(gd)) {
+			ret = PTR_ERR(gd);
+			goto err_node_put;
+		}
+		led->slow = gd;
+
 		ret = of_property_read_string(child, "linux,default-trigger",
 					      &string);
 		if (ret == 0)
diff --git a/drivers/leds/leds-pwm.c b/drivers/leds/leds-pwm.c
index 8b6965a..6c8a724 100644
--- a/drivers/leds/leds-pwm.c
+++ b/drivers/leds/leds-pwm.c
@@ -16,60 +16,55 @@
 #include <linux/leds.h>
 #include <linux/err.h>
 #include <linux/pwm.h>
-#include <linux/leds_pwm.h>
 #include <linux/slab.h>
 
+struct led_pwm {
+	const char	*name;
+	const char	*default_trigger;
+	u8		active_low;
+	unsigned int	max_brightness;
+};
+
+struct led_pwm_platform_data {
+	int		num_leds;
+	struct led_pwm	*leds;
+};
+
 struct led_pwm_data {
 	struct led_classdev	cdev;
 	struct pwm_device	*pwm;
+	struct pwm_state	pwmstate;
 	unsigned int		active_low;
-	unsigned int		period;
-	int			duty;
 };
 
 struct led_pwm_priv {
 	int num_leds;
-	struct led_pwm_data leds[0];
+	struct led_pwm_data leds[];
 };
 
-static void __led_pwm_set(struct led_pwm_data *led_dat)
-{
-	int new_duty = led_dat->duty;
-
-	pwm_config(led_dat->pwm, new_duty, led_dat->period);
-
-	if (new_duty == 0)
-		pwm_disable(led_dat->pwm);
-	else
-		pwm_enable(led_dat->pwm);
-}
-
 static int led_pwm_set(struct led_classdev *led_cdev,
 		       enum led_brightness brightness)
 {
 	struct led_pwm_data *led_dat =
 		container_of(led_cdev, struct led_pwm_data, cdev);
 	unsigned int max = led_dat->cdev.max_brightness;
-	unsigned long long duty =  led_dat->period;
+	unsigned long long duty = led_dat->pwmstate.period;
 
 	duty *= brightness;
 	do_div(duty, max);
 
 	if (led_dat->active_low)
-		duty = led_dat->period - duty;
+		duty = led_dat->pwmstate.period - duty;
 
-	led_dat->duty = duty;
-
-	__led_pwm_set(led_dat);
-
-	return 0;
+	led_dat->pwmstate.duty_cycle = duty;
+	led_dat->pwmstate.enabled = duty > 0;
+	return pwm_apply_state(led_dat->pwm, &led_dat->pwmstate);
 }
 
 static int led_pwm_add(struct device *dev, struct led_pwm_priv *priv,
 		       struct led_pwm *led, struct fwnode_handle *fwnode)
 {
 	struct led_pwm_data *led_data = &priv->leds[priv->num_leds];
-	struct pwm_args pargs;
 	int ret;
 
 	led_data->active_low = led->active_low;
@@ -93,17 +88,7 @@ static int led_pwm_add(struct device *dev, struct led_pwm_priv *priv,
 
 	led_data->cdev.brightness_set_blocking = led_pwm_set;
 
-	/*
-	 * FIXME: pwm_apply_args() should be removed when switching to the
-	 * atomic PWM API.
-	 */
-	pwm_apply_args(led_data->pwm);
-
-	pwm_get_args(led_data->pwm, &pargs);
-
-	led_data->period = pargs.period;
-	if (!led_data->period && (led->pwm_period_ns > 0))
-		led_data->period = led->pwm_period_ns;
+	pwm_init_state(led_data->pwm, &led_data->pwmstate);
 
 	ret = devm_led_classdev_register(dev, &led_data->cdev);
 	if (ret == 0) {
diff --git a/drivers/macintosh/ans-lcd.c b/drivers/macintosh/ans-lcd.c
index b1314d1..b4821c7 100644
--- a/drivers/macintosh/ans-lcd.c
+++ b/drivers/macintosh/ans-lcd.c
@@ -142,7 +142,7 @@ const struct file_operations anslcd_fops = {
 };
 
 static struct miscdevice anslcd_dev = {
-	ANSLCD_MINOR,
+	LCD_MINOR,
 	"anslcd",
 	&anslcd_fops
 };
diff --git a/drivers/macintosh/ans-lcd.h b/drivers/macintosh/ans-lcd.h
index f0a6e4c..bca7d76 100644
--- a/drivers/macintosh/ans-lcd.h
+++ b/drivers/macintosh/ans-lcd.h
@@ -2,8 +2,6 @@
 #ifndef _PPC_ANS_LCD_H
 #define _PPC_ANS_LCD_H
 
-#define ANSLCD_MINOR		156
-
 #define ANSLCD_CLEAR		0x01
 #define ANSLCD_SENDCTRL		0x02
 #define ANSLCD_SETSHORTDELAY	0x03
diff --git a/drivers/macintosh/therm_windtunnel.c b/drivers/macintosh/therm_windtunnel.c
index a0d87ed..f55f6ad 100644
--- a/drivers/macintosh/therm_windtunnel.c
+++ b/drivers/macintosh/therm_windtunnel.c
@@ -323,7 +323,7 @@ static void do_attach(struct i2c_adapter *adapter)
 		of_node_put(np);
 	} else {
 		strlcpy(info.type, "MAC,ds1775", I2C_NAME_SIZE);
-		i2c_new_probed_device(adapter, &info, scan_ds1775, NULL);
+		i2c_new_scanned_device(adapter, &info, scan_ds1775, NULL);
 	}
 
 	np = of_find_compatible_node(adapter->dev.of_node, NULL, "MAC,adm1030");
@@ -331,7 +331,7 @@ static void do_attach(struct i2c_adapter *adapter)
 		of_node_put(np);
 	} else {
 		strlcpy(info.type, "MAC,adm1030", I2C_NAME_SIZE);
-		i2c_new_probed_device(adapter, &info, scan_adm1030, NULL);
+		i2c_new_scanned_device(adapter, &info, scan_adm1030, NULL);
 	}
 }
 
diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c
index d38fb78..83eb05b 100644
--- a/drivers/macintosh/via-pmu.c
+++ b/drivers/macintosh/via-pmu.c
@@ -75,9 +75,6 @@
 /* Some compile options */
 #undef DEBUG_SLEEP
 
-/* Misc minor number allocated for /dev/pmu */
-#define PMU_MINOR		154
-
 /* How many iterations between battery polls */
 #define BATTERY_POLLING_COUNT	2
 
diff --git a/drivers/md/dm-integrity.c b/drivers/md/dm-integrity.c
index b989d10..4094c47 100644
--- a/drivers/md/dm-integrity.c
+++ b/drivers/md/dm-integrity.c
@@ -1333,7 +1333,7 @@ static int dm_integrity_rw_tag(struct dm_integrity_c *ic, unsigned char *tag, se
 			if (likely(is_power_of_2(ic->tag_size))) {
 				if (unlikely(memcmp(dp, tag, to_copy)))
 					if (unlikely(!ic->discard) ||
-					    unlikely(!memchr_inv(dp, DISCARD_FILLER, to_copy))) {
+					    unlikely(memchr_inv(dp, DISCARD_FILLER, to_copy) != NULL)) {
 						goto thorough_test;
 				}
 			} else {
@@ -3069,7 +3069,7 @@ static void dm_integrity_status(struct dm_target *ti, status_type_t type,
 	switch (type) {
 	case STATUSTYPE_INFO:
 		DMEMIT("%llu %llu",
-			atomic64_read(&ic->number_of_mismatches),
+			(unsigned long long)atomic64_read(&ic->number_of_mismatches),
 			ic->provided_data_sectors);
 		if (ic->sb->flags & cpu_to_le32(SB_FLAG_RECALCULATING))
 			DMEMIT(" %llu", le64_to_cpu(ic->sb->recalc_sector));
diff --git a/drivers/md/dm-linear.c b/drivers/md/dm-linear.c
index 8d07fdf..e1db434 100644
--- a/drivers/md/dm-linear.c
+++ b/drivers/md/dm-linear.c
@@ -201,10 +201,27 @@ static size_t linear_dax_copy_to_iter(struct dm_target *ti, pgoff_t pgoff,
 	return dax_copy_to_iter(dax_dev, pgoff, addr, bytes, i);
 }
 
+static int linear_dax_zero_page_range(struct dm_target *ti, pgoff_t pgoff,
+				      size_t nr_pages)
+{
+	int ret;
+	struct linear_c *lc = ti->private;
+	struct block_device *bdev = lc->dev->bdev;
+	struct dax_device *dax_dev = lc->dev->dax_dev;
+	sector_t dev_sector, sector = pgoff * PAGE_SECTORS;
+
+	dev_sector = linear_map_sector(ti, sector);
+	ret = bdev_dax_pgoff(bdev, dev_sector, nr_pages << PAGE_SHIFT, &pgoff);
+	if (ret)
+		return ret;
+	return dax_zero_page_range(dax_dev, pgoff, nr_pages);
+}
+
 #else
 #define linear_dax_direct_access NULL
 #define linear_dax_copy_from_iter NULL
 #define linear_dax_copy_to_iter NULL
+#define linear_dax_zero_page_range NULL
 #endif
 
 static struct target_type linear_target = {
@@ -226,6 +243,7 @@ static struct target_type linear_target = {
 	.direct_access = linear_dax_direct_access,
 	.dax_copy_from_iter = linear_dax_copy_from_iter,
 	.dax_copy_to_iter = linear_dax_copy_to_iter,
+	.dax_zero_page_range = linear_dax_zero_page_range,
 };
 
 int __init dm_linear_init(void)
diff --git a/drivers/md/dm-log-writes.c b/drivers/md/dm-log-writes.c
index 99721c7..8ea20b5 100644
--- a/drivers/md/dm-log-writes.c
+++ b/drivers/md/dm-log-writes.c
@@ -994,10 +994,26 @@ static size_t log_writes_dax_copy_to_iter(struct dm_target *ti,
 	return dax_copy_to_iter(lc->dev->dax_dev, pgoff, addr, bytes, i);
 }
 
+static int log_writes_dax_zero_page_range(struct dm_target *ti, pgoff_t pgoff,
+					  size_t nr_pages)
+{
+	int ret;
+	struct log_writes_c *lc = ti->private;
+	sector_t sector = pgoff * PAGE_SECTORS;
+
+	ret = bdev_dax_pgoff(lc->dev->bdev, sector, nr_pages << PAGE_SHIFT,
+			     &pgoff);
+	if (ret)
+		return ret;
+	return dax_zero_page_range(lc->dev->dax_dev, pgoff,
+				   nr_pages << PAGE_SHIFT);
+}
+
 #else
 #define log_writes_dax_direct_access NULL
 #define log_writes_dax_copy_from_iter NULL
 #define log_writes_dax_copy_to_iter NULL
+#define log_writes_dax_zero_page_range NULL
 #endif
 
 static struct target_type log_writes_target = {
@@ -1016,6 +1032,7 @@ static struct target_type log_writes_target = {
 	.direct_access = log_writes_dax_direct_access,
 	.dax_copy_from_iter = log_writes_dax_copy_from_iter,
 	.dax_copy_to_iter = log_writes_dax_copy_to_iter,
+	.dax_zero_page_range = log_writes_dax_zero_page_range,
 };
 
 static int __init dm_log_writes_init(void)
diff --git a/drivers/md/dm-stripe.c b/drivers/md/dm-stripe.c
index 63bbcc2..fa813c0 100644
--- a/drivers/md/dm-stripe.c
+++ b/drivers/md/dm-stripe.c
@@ -360,10 +360,32 @@ static size_t stripe_dax_copy_to_iter(struct dm_target *ti, pgoff_t pgoff,
 	return dax_copy_to_iter(dax_dev, pgoff, addr, bytes, i);
 }
 
+static int stripe_dax_zero_page_range(struct dm_target *ti, pgoff_t pgoff,
+				      size_t nr_pages)
+{
+	int ret;
+	sector_t dev_sector, sector = pgoff * PAGE_SECTORS;
+	struct stripe_c *sc = ti->private;
+	struct dax_device *dax_dev;
+	struct block_device *bdev;
+	uint32_t stripe;
+
+	stripe_map_sector(sc, sector, &stripe, &dev_sector);
+	dev_sector += sc->stripe[stripe].physical_start;
+	dax_dev = sc->stripe[stripe].dev->dax_dev;
+	bdev = sc->stripe[stripe].dev->bdev;
+
+	ret = bdev_dax_pgoff(bdev, dev_sector, nr_pages << PAGE_SHIFT, &pgoff);
+	if (ret)
+		return ret;
+	return dax_zero_page_range(dax_dev, pgoff, nr_pages);
+}
+
 #else
 #define stripe_dax_direct_access NULL
 #define stripe_dax_copy_from_iter NULL
 #define stripe_dax_copy_to_iter NULL
+#define stripe_dax_zero_page_range NULL
 #endif
 
 /*
@@ -486,6 +508,7 @@ static struct target_type stripe_target = {
 	.direct_access = stripe_dax_direct_access,
 	.dax_copy_from_iter = stripe_dax_copy_from_iter,
 	.dax_copy_to_iter = stripe_dax_copy_to_iter,
+	.dax_zero_page_range = stripe_dax_zero_page_range,
 };
 
 int __init dm_stripe_init(void)
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 753302e..db9e461 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -1199,6 +1199,35 @@ static size_t dm_dax_copy_to_iter(struct dax_device *dax_dev, pgoff_t pgoff,
 	return ret;
 }
 
+static int dm_dax_zero_page_range(struct dax_device *dax_dev, pgoff_t pgoff,
+				  size_t nr_pages)
+{
+	struct mapped_device *md = dax_get_private(dax_dev);
+	sector_t sector = pgoff * PAGE_SECTORS;
+	struct dm_target *ti;
+	int ret = -EIO;
+	int srcu_idx;
+
+	ti = dm_dax_get_live_target(md, sector, &srcu_idx);
+
+	if (!ti)
+		goto out;
+	if (WARN_ON(!ti->type->dax_zero_page_range)) {
+		/*
+		 * ->zero_page_range() is mandatory dax operation. If we are
+		 *  here, something is wrong.
+		 */
+		dm_put_live_table(md, srcu_idx);
+		goto out;
+	}
+	ret = ti->type->dax_zero_page_range(ti, pgoff, nr_pages);
+
+ out:
+	dm_put_live_table(md, srcu_idx);
+
+	return ret;
+}
+
 /*
  * A target may call dm_accept_partial_bio only from the map routine.  It is
  * allowed for all bio types except REQ_PREFLUSH, REQ_OP_ZONE_RESET,
@@ -1740,8 +1769,9 @@ static blk_qc_t dm_process_bio(struct mapped_device *md,
 	 * won't be imposed.
 	 */
 	if (current->bio_list) {
-		blk_queue_split(md->queue, &bio);
-		if (!is_abnormal_io(bio))
+		if (is_abnormal_io(bio))
+			blk_queue_split(md->queue, &bio);
+		else
 			dm_queue_split(md, ti, &bio);
 	}
 
@@ -1968,7 +1998,7 @@ static struct mapped_device *alloc_dev(int minor)
 	if (IS_ENABLED(CONFIG_DAX_DRIVER)) {
 		md->dax_dev = alloc_dax(md, md->disk->disk_name,
 					&dm_dax_ops, 0);
-		if (!md->dax_dev)
+		if (IS_ERR(md->dax_dev))
 			goto bad;
 	}
 
@@ -3199,6 +3229,7 @@ static const struct dax_operations dm_dax_ops = {
 	.dax_supported = dm_dax_supported,
 	.copy_from_iter = dm_dax_copy_from_iter,
 	.copy_to_iter = dm_dax_copy_to_iter,
+	.zero_page_range = dm_dax_zero_page_range,
 };
 
 /*
diff --git a/drivers/memory/.gitignore b/drivers/memory/.gitignore
index cbca8b0..caedc4c 100644
--- a/drivers/memory/.gitignore
+++ b/drivers/memory/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 ti-emif-asm-offsets.h
diff --git a/drivers/memory/tegra/tegra124-emc.c b/drivers/memory/tegra/tegra124-emc.c
index 21f0524..33b8216 100644
--- a/drivers/memory/tegra/tegra124-emc.c
+++ b/drivers/memory/tegra/tegra124-emc.c
@@ -1158,6 +1158,11 @@ static void emc_debugfs_init(struct device *dev, struct tegra_emc *emc)
 			emc->debugfs.max_rate = emc->timings[i].rate;
 	}
 
+	if (!emc->num_timings) {
+		emc->debugfs.min_rate = clk_get_rate(emc->clk);
+		emc->debugfs.max_rate = emc->debugfs.min_rate;
+	}
+
 	err = clk_set_rate_range(emc->clk, emc->debugfs.min_rate,
 				 emc->debugfs.max_rate);
 	if (err < 0) {
diff --git a/drivers/memory/tegra/tegra20-emc.c b/drivers/memory/tegra/tegra20-emc.c
index 8ae474d..b16715e 100644
--- a/drivers/memory/tegra/tegra20-emc.c
+++ b/drivers/memory/tegra/tegra20-emc.c
@@ -628,6 +628,11 @@ static void tegra_emc_debugfs_init(struct tegra_emc *emc)
 			emc->debugfs.max_rate = emc->timings[i].rate;
 	}
 
+	if (!emc->num_timings) {
+		emc->debugfs.min_rate = clk_get_rate(emc->clk);
+		emc->debugfs.max_rate = emc->debugfs.min_rate;
+	}
+
 	err = clk_set_rate_range(emc->clk, emc->debugfs.min_rate,
 				 emc->debugfs.max_rate);
 	if (err < 0) {
diff --git a/drivers/memory/tegra/tegra30-emc.c b/drivers/memory/tegra/tegra30-emc.c
index e3efd95..b42bdb6 100644
--- a/drivers/memory/tegra/tegra30-emc.c
+++ b/drivers/memory/tegra/tegra30-emc.c
@@ -1256,6 +1256,11 @@ static void tegra_emc_debugfs_init(struct tegra_emc *emc)
 			emc->debugfs.max_rate = emc->timings[i].rate;
 	}
 
+	if (!emc->num_timings) {
+		emc->debugfs.min_rate = clk_get_rate(emc->clk);
+		emc->debugfs.max_rate = emc->debugfs.min_rate;
+	}
+
 	err = clk_set_rate_range(emc->clk, emc->debugfs.min_rate,
 				 emc->debugfs.max_rate);
 	if (err < 0) {
diff --git a/drivers/message/fusion/mptlan.h b/drivers/message/fusion/mptlan.h
index 8a24494..a1ec7e84 100644
--- a/drivers/message/fusion/mptlan.h
+++ b/drivers/message/fusion/mptlan.h
@@ -64,6 +64,7 @@
 #include <linux/if_arp.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/printk.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/workqueue.h>
@@ -111,13 +112,13 @@ MODULE_DESCRIPTION(LANAME);
 #ifdef MPT_LAN_IO_DEBUG
 #define dioprintk(x)  printk x
 #else
-#define dioprintk(x)
+#define dioprintk(x)  no_printk x
 #endif
 
 #ifdef MPT_LAN_DEBUG
 #define dlprintk(x)  printk x
 #else
-#define dlprintk(x)
+#define dlprintk(x)  no_printk x
 #endif
 
 #define NETDEV_TO_LANPRIV_PTR(d)	((struct mpt_lan_priv *)netdev_priv(d))
diff --git a/drivers/message/fusion/mptsas.h b/drivers/message/fusion/mptsas.h
index c396483..e35b138 100644
--- a/drivers/message/fusion/mptsas.h
+++ b/drivers/message/fusion/mptsas.h
@@ -110,7 +110,7 @@ struct fw_event_work {
 	MPT_ADAPTER	*ioc;
 	u32			event;
 	u8			retries;
-	char			event_data[0] __aligned(4);
+	char			event_data[] __aligned(4);
 };
 
 struct mptsas_discovery_event {
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 2b20329..0a59249 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -642,6 +642,19 @@
 	  AT90LS8535 microcontroller flashed with a special iPAQ
 	  firmware using the custom protocol implemented in this driver.
 
+config MFD_IQS62X
+	tristate "Azoteq IQS620A/621/622/624/625 core support"
+	depends on I2C
+	select MFD_CORE
+	select REGMAP_I2C
+	help
+	  Say Y here if you want to build core support for the Azoteq IQS620A,
+	  IQS621, IQS622, IQS624 and IQS625 multi-function sensors. Additional
+	  options must be selected to enable device-specific functions.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called iqs62x.
+
 config MFD_JANZ_CMODIO
 	tristate "Janz CMOD-IO PCI MODULbus Carrier Board"
 	select MFD_CORE
@@ -893,6 +906,7 @@
 	tristate "Support for Motorola CPCAP"
 	depends on SPI
 	depends on OF || COMPILE_TEST
+	select MFD_CORE
 	select REGMAP_SPI
 	select REGMAP_IRQ
 	help
@@ -1058,6 +1072,7 @@
 	depends on OF
 	select MFD_CORE
 	select REGMAP_I2C
+	select REGMAP_IRQ
 	help
 	  Say yes here to add support for the Ricoh RN5T567,
 	  RN5T618, RC5T619 PMIC.
@@ -1201,7 +1216,7 @@
 	  chip. This connects to U8500 either on the SSP/SPI bus (deprecated
 	  since hardware version v1.0) or the I2C bus via PRCMU. It also adds
 	  the irq_chip parts for handling the Mixed Signal chip events.
-	  This chip embeds various other multimedia funtionalities as well.
+	  This chip embeds various other multimedia functionalities as well.
 
 config AB8500_DEBUG
 	bool "Enable debug info via debugfs"
@@ -1851,7 +1866,7 @@
 	  has on board GPIO and regulator functionality which is
 	  supported via the relevant subsystems.  This driver provides
 	  core support for the WM8994, in order to use the actual
-	  functionaltiy of the device other drivers must be enabled.
+	  functionality of the device other drivers must be enabled.
 
 config MFD_WM97xx
 	tristate "Wolfson Microelectronics WM97xx"
@@ -1864,7 +1879,7 @@
 	  designed for smartphone applications.  As well as audio functionality
 	  it has on board GPIO and a touchscreen functionality which is
 	  supported via the relevant subsystems.  This driver provides core
-	  support for the WM97xx, in order to use the actual functionaltiy of
+	  support for the WM97xx, in order to use the actual functionality of
 	  the device other drivers must be enabled.
 
 config MFD_STW481X
@@ -1957,7 +1972,7 @@
 	  Support for ST Microelectronics STPMIC1 PMIC. STPMIC1 has power on
 	  key, watchdog and regulator functionalities which are supported via
 	  the relevant subsystems. This driver provides core support for the
-	  STPMIC1. In order to use the actual functionaltiy of the device other
+	  STPMIC1. In order to use the actual functionality of the device other
 	  drivers must be enabled.
 
 	  To compile this driver as a module, choose M here: the
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index b83f172..f935d10 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -226,6 +226,7 @@
 obj-$(CONFIG_MFD_AS3722)	+= as3722.o
 obj-$(CONFIG_MFD_STW481X)	+= stw481x.o
 obj-$(CONFIG_MFD_IPAQ_MICRO)	+= ipaq-micro.o
+obj-$(CONFIG_MFD_IQS62X)	+= iqs62x.o
 obj-$(CONFIG_MFD_MENF21BMC)	+= menf21bmc.o
 obj-$(CONFIG_MFD_HI6421_PMIC)	+= hi6421-pmic-core.o
 obj-$(CONFIG_MFD_HI655X_PMIC)   += hi655x-pmic.o
diff --git a/drivers/mfd/aat2870-core.c b/drivers/mfd/aat2870-core.c
index 78ee4b2..a17cf75 100644
--- a/drivers/mfd/aat2870-core.c
+++ b/drivers/mfd/aat2870-core.c
@@ -221,7 +221,7 @@ static ssize_t aat2870_dump_reg(struct aat2870_data *aat2870, char *buf)
 
 	count += sprintf(buf, "aat2870 registers\n");
 	for (addr = 0; addr < AAT2870_REG_NUM; addr++) {
-		count += sprintf(buf + count, "0x%02x: ", addr);
+		count += snprintf(buf + count, PAGE_SIZE - count, "0x%02x: ", addr);
 		if (count >= PAGE_SIZE - 1)
 			break;
 
diff --git a/drivers/mfd/cros_ec_dev.c b/drivers/mfd/cros_ec_dev.c
index 39e6116..32c2b91 100644
--- a/drivers/mfd/cros_ec_dev.c
+++ b/drivers/mfd/cros_ec_dev.c
@@ -211,7 +211,7 @@ static int ec_device_probe(struct platform_device *pdev)
 	 * explicitly added on platforms that don't have the PD notifier ACPI
 	 * device entry defined.
 	 */
-	if (IS_ENABLED(CONFIG_OF)) {
+	if (IS_ENABLED(CONFIG_OF) && ec->ec_dev->dev->of_node) {
 		if (cros_ec_check_features(ec, EC_FEATURE_USB_PD)) {
 			retval = mfd_add_hotplug_devices(ec->dev,
 					cros_usbpd_notify_cells,
diff --git a/drivers/mfd/da9062-core.c b/drivers/mfd/da9062-core.c
index 419c735..fc30726 100644
--- a/drivers/mfd/da9062-core.c
+++ b/drivers/mfd/da9062-core.c
@@ -21,6 +21,9 @@
 #define	DA9062_REG_EVENT_B_OFFSET	1
 #define	DA9062_REG_EVENT_C_OFFSET	2
 
+#define	DA9062_IRQ_LOW	0
+#define	DA9062_IRQ_HIGH	1
+
 static struct regmap_irq da9061_irqs[] = {
 	/* EVENT A */
 	[DA9061_IRQ_ONKEY] = {
@@ -369,6 +372,33 @@ static int da9062_get_device_type(struct da9062 *chip)
 	return ret;
 }
 
+static u32 da9062_configure_irq_type(struct da9062 *chip, int irq, u32 *trigger)
+{
+	u32 irq_type = 0;
+	struct irq_data *irq_data = irq_get_irq_data(irq);
+
+	if (!irq_data) {
+		dev_err(chip->dev, "Invalid IRQ: %d\n", irq);
+		return -EINVAL;
+	}
+	*trigger = irqd_get_trigger_type(irq_data);
+
+	switch (*trigger) {
+	case IRQ_TYPE_LEVEL_HIGH:
+		irq_type = DA9062_IRQ_HIGH;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		irq_type = DA9062_IRQ_LOW;
+		break;
+	default:
+		dev_warn(chip->dev, "Unsupported IRQ type: %d\n", *trigger);
+		return -EINVAL;
+	}
+	return regmap_update_bits(chip->regmap, DA9062AA_CONFIG_A,
+			DA9062AA_IRQ_TYPE_MASK,
+			irq_type << DA9062AA_IRQ_TYPE_SHIFT);
+}
+
 static const struct regmap_range da9061_aa_readable_ranges[] = {
 	regmap_reg_range(DA9062AA_PAGE_CON, DA9062AA_STATUS_B),
 	regmap_reg_range(DA9062AA_STATUS_D, DA9062AA_EVENT_C),
@@ -388,6 +418,7 @@ static const struct regmap_range da9061_aa_readable_ranges[] = {
 	regmap_reg_range(DA9062AA_VBUCK1_A, DA9062AA_VBUCK4_A),
 	regmap_reg_range(DA9062AA_VBUCK3_A, DA9062AA_VBUCK3_A),
 	regmap_reg_range(DA9062AA_VLDO1_A, DA9062AA_VLDO4_A),
+	regmap_reg_range(DA9062AA_CONFIG_A, DA9062AA_CONFIG_A),
 	regmap_reg_range(DA9062AA_VBUCK1_B, DA9062AA_VBUCK4_B),
 	regmap_reg_range(DA9062AA_VBUCK3_B, DA9062AA_VBUCK3_B),
 	regmap_reg_range(DA9062AA_VLDO1_B, DA9062AA_VLDO4_B),
@@ -417,6 +448,7 @@ static const struct regmap_range da9061_aa_writeable_ranges[] = {
 	regmap_reg_range(DA9062AA_VBUCK1_A, DA9062AA_VBUCK4_A),
 	regmap_reg_range(DA9062AA_VBUCK3_A, DA9062AA_VBUCK3_A),
 	regmap_reg_range(DA9062AA_VLDO1_A, DA9062AA_VLDO4_A),
+	regmap_reg_range(DA9062AA_CONFIG_A, DA9062AA_CONFIG_A),
 	regmap_reg_range(DA9062AA_VBUCK1_B, DA9062AA_VBUCK4_B),
 	regmap_reg_range(DA9062AA_VBUCK3_B, DA9062AA_VBUCK3_B),
 	regmap_reg_range(DA9062AA_VLDO1_B, DA9062AA_VLDO4_B),
@@ -596,6 +628,7 @@ static int da9062_i2c_probe(struct i2c_client *i2c,
 	const struct regmap_irq_chip *irq_chip;
 	const struct regmap_config *config;
 	int cell_num;
+	u32 trigger_type = 0;
 	int ret;
 
 	chip = devm_kzalloc(&i2c->dev, sizeof(*chip), GFP_KERNEL);
@@ -654,10 +687,15 @@ static int da9062_i2c_probe(struct i2c_client *i2c,
 	if (ret)
 		return ret;
 
+	ret = da9062_configure_irq_type(chip, i2c->irq, &trigger_type);
+	if (ret < 0) {
+		dev_err(chip->dev, "Failed to configure IRQ type\n");
+		return ret;
+	}
+
 	ret = regmap_add_irq_chip(chip->regmap, i2c->irq,
-			IRQF_TRIGGER_LOW | IRQF_ONESHOT | IRQF_SHARED,
-			-1, irq_chip,
-			&chip->regmap_irq);
+			trigger_type | IRQF_SHARED | IRQF_ONESHOT,
+			-1, irq_chip, &chip->regmap_irq);
 	if (ret) {
 		dev_err(chip->dev, "Failed to request IRQ %d: %d\n",
 			i2c->irq, ret);
diff --git a/drivers/mfd/dln2.c b/drivers/mfd/dln2.c
index 7841c11..39276fa 100644
--- a/drivers/mfd/dln2.c
+++ b/drivers/mfd/dln2.c
@@ -90,6 +90,11 @@ struct dln2_mod_rx_slots {
 	spinlock_t lock;
 };
 
+enum dln2_endpoint {
+	DLN2_EP_OUT	= 0,
+	DLN2_EP_IN	= 1,
+};
+
 struct dln2_dev {
 	struct usb_device *usb_dev;
 	struct usb_interface *interface;
@@ -640,35 +645,56 @@ static int dln2_start_rx_urbs(struct dln2_dev *dln2, gfp_t gfp)
 	return 0;
 }
 
+enum {
+	DLN2_ACPI_MATCH_GPIO	= 0,
+	DLN2_ACPI_MATCH_I2C	= 1,
+	DLN2_ACPI_MATCH_SPI	= 2,
+};
+
 static struct dln2_platform_data dln2_pdata_gpio = {
 	.handle = DLN2_HANDLE_GPIO,
 };
 
+static struct mfd_cell_acpi_match dln2_acpi_match_gpio = {
+	.adr = DLN2_ACPI_MATCH_GPIO,
+};
+
 /* Only one I2C port seems to be supported on current hardware */
 static struct dln2_platform_data dln2_pdata_i2c = {
 	.handle = DLN2_HANDLE_I2C,
 	.port = 0,
 };
 
+static struct mfd_cell_acpi_match dln2_acpi_match_i2c = {
+	.adr = DLN2_ACPI_MATCH_I2C,
+};
+
 /* Only one SPI port supported */
 static struct dln2_platform_data dln2_pdata_spi = {
 	.handle = DLN2_HANDLE_SPI,
 	.port = 0,
 };
 
+static struct mfd_cell_acpi_match dln2_acpi_match_spi = {
+	.adr = DLN2_ACPI_MATCH_SPI,
+};
+
 static const struct mfd_cell dln2_devs[] = {
 	{
 		.name = "dln2-gpio",
+		.acpi_match = &dln2_acpi_match_gpio,
 		.platform_data = &dln2_pdata_gpio,
 		.pdata_size = sizeof(struct dln2_platform_data),
 	},
 	{
 		.name = "dln2-i2c",
+		.acpi_match = &dln2_acpi_match_i2c,
 		.platform_data = &dln2_pdata_i2c,
 		.pdata_size = sizeof(struct dln2_platform_data),
 	},
 	{
 		.name = "dln2-spi",
+		.acpi_match = &dln2_acpi_match_spi,
 		.platform_data = &dln2_pdata_spi,
 		.pdata_size = sizeof(struct dln2_platform_data),
 	},
@@ -733,10 +759,10 @@ static int dln2_probe(struct usb_interface *interface,
 	    hostif->desc.bNumEndpoints < 2)
 		return -ENODEV;
 
-	epin = &hostif->endpoint[0].desc;
-	epout = &hostif->endpoint[1].desc;
+	epout = &hostif->endpoint[DLN2_EP_OUT].desc;
 	if (!usb_endpoint_is_bulk_out(epout))
 		return -ENODEV;
+	epin = &hostif->endpoint[DLN2_EP_IN].desc;
 	if (!usb_endpoint_is_bulk_in(epin))
 		return -ENODEV;
 
diff --git a/drivers/mfd/intel-lpss-pci.c b/drivers/mfd/intel-lpss-pci.c
index c40a6c7..7fc0c5d 100644
--- a/drivers/mfd/intel-lpss-pci.c
+++ b/drivers/mfd/intel-lpss-pci.c
@@ -139,6 +139,11 @@ static const struct intel_lpss_platform_info cnl_i2c_info = {
 	.properties = spt_i2c_properties,
 };
 
+static const struct intel_lpss_platform_info ehl_i2c_info = {
+	.clk_rate = 100000000,
+	.properties = bxt_i2c_properties,
+};
+
 static const struct pci_device_id intel_lpss_pci_ids[] = {
 	/* CML-LP */
 	{ PCI_VDEVICE(INTEL, 0x02a8), (kernel_ulong_t)&spt_uart_info },
@@ -231,15 +236,15 @@ static const struct pci_device_id intel_lpss_pci_ids[] = {
 	{ PCI_VDEVICE(INTEL, 0x4b2a), (kernel_ulong_t)&bxt_info },
 	{ PCI_VDEVICE(INTEL, 0x4b2b), (kernel_ulong_t)&bxt_info },
 	{ PCI_VDEVICE(INTEL, 0x4b37), (kernel_ulong_t)&bxt_info },
-	{ PCI_VDEVICE(INTEL, 0x4b44), (kernel_ulong_t)&bxt_i2c_info },
-	{ PCI_VDEVICE(INTEL, 0x4b45), (kernel_ulong_t)&bxt_i2c_info },
-	{ PCI_VDEVICE(INTEL, 0x4b4b), (kernel_ulong_t)&bxt_i2c_info },
-	{ PCI_VDEVICE(INTEL, 0x4b4c), (kernel_ulong_t)&bxt_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x4b44), (kernel_ulong_t)&ehl_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x4b45), (kernel_ulong_t)&ehl_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x4b4b), (kernel_ulong_t)&ehl_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x4b4c), (kernel_ulong_t)&ehl_i2c_info },
 	{ PCI_VDEVICE(INTEL, 0x4b4d), (kernel_ulong_t)&bxt_uart_info },
-	{ PCI_VDEVICE(INTEL, 0x4b78), (kernel_ulong_t)&bxt_i2c_info },
-	{ PCI_VDEVICE(INTEL, 0x4b79), (kernel_ulong_t)&bxt_i2c_info },
-	{ PCI_VDEVICE(INTEL, 0x4b7a), (kernel_ulong_t)&bxt_i2c_info },
-	{ PCI_VDEVICE(INTEL, 0x4b7b), (kernel_ulong_t)&bxt_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x4b78), (kernel_ulong_t)&ehl_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x4b79), (kernel_ulong_t)&ehl_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x4b7a), (kernel_ulong_t)&ehl_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x4b7b), (kernel_ulong_t)&ehl_i2c_info },
 	/* JSL */
 	{ PCI_VDEVICE(INTEL, 0x4da8), (kernel_ulong_t)&spt_uart_info },
 	{ PCI_VDEVICE(INTEL, 0x4da9), (kernel_ulong_t)&spt_uart_info },
@@ -347,6 +352,16 @@ static const struct pci_device_id intel_lpss_pci_ids[] = {
 	{ PCI_VDEVICE(INTEL, 0xa36a), (kernel_ulong_t)&cnl_i2c_info },
 	{ PCI_VDEVICE(INTEL, 0xa36b), (kernel_ulong_t)&cnl_i2c_info },
 	{ PCI_VDEVICE(INTEL, 0xa37b), (kernel_ulong_t)&spt_info },
+	/* CML-V */
+	{ PCI_VDEVICE(INTEL, 0xa3a7), (kernel_ulong_t)&spt_uart_info },
+	{ PCI_VDEVICE(INTEL, 0xa3a8), (kernel_ulong_t)&spt_uart_info },
+	{ PCI_VDEVICE(INTEL, 0xa3a9), (kernel_ulong_t)&spt_info },
+	{ PCI_VDEVICE(INTEL, 0xa3aa), (kernel_ulong_t)&spt_info },
+	{ PCI_VDEVICE(INTEL, 0xa3e0), (kernel_ulong_t)&spt_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0xa3e1), (kernel_ulong_t)&spt_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0xa3e2), (kernel_ulong_t)&spt_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0xa3e3), (kernel_ulong_t)&spt_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0xa3e6), (kernel_ulong_t)&spt_uart_info },
 	{ }
 };
 MODULE_DEVICE_TABLE(pci, intel_lpss_pci_ids);
diff --git a/drivers/mfd/iqs62x.c b/drivers/mfd/iqs62x.c
new file mode 100644
index 0000000..af764bc
--- /dev/null
+++ b/drivers/mfd/iqs62x.c
@@ -0,0 +1,1063 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Azoteq IQS620A/621/622/624/625 Multi-Function Sensors
+ *
+ * Copyright (C) 2019 Jeff LaBundy <jeff@labundy.com>
+ *
+ * These devices rely on application-specific register settings and calibration
+ * data developed in and exported from a suite of GUIs offered by the vendor. A
+ * separate tool converts the GUIs' ASCII-based output into a standard firmware
+ * file parsed by the driver.
+ *
+ * Link to datasheets and GUIs: https://www.azoteq.com/
+ *
+ * Link to conversion tool: https://github.com/jlabundy/iqs62x-h2bin.git
+ */
+
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/firmware.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/iqs62x.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/of_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <asm/unaligned.h>
+
+#define IQS62X_PROD_NUM				0x00
+
+#define IQS62X_SYS_FLAGS			0x10
+#define IQS62X_SYS_FLAGS_IN_ATI			BIT(2)
+
+#define IQS620_HALL_FLAGS			0x16
+#define IQS621_HALL_FLAGS			0x19
+#define IQS622_HALL_FLAGS			IQS621_HALL_FLAGS
+
+#define IQS624_INTERVAL_NUM			0x18
+#define IQS625_INTERVAL_NUM			0x12
+
+#define IQS622_PROX_SETTINGS_4			0x48
+#define IQS620_PROX_SETTINGS_4			0x50
+#define IQS620_PROX_SETTINGS_4_SAR_EN		BIT(7)
+
+#define IQS621_ALS_CAL_DIV_LUX			0x82
+#define IQS621_ALS_CAL_DIV_IR			0x83
+
+#define IQS620_TEMP_CAL_MULT			0xC2
+#define IQS620_TEMP_CAL_DIV			0xC3
+#define IQS620_TEMP_CAL_OFFS			0xC4
+
+#define IQS62X_SYS_SETTINGS			0xD0
+#define IQS62X_SYS_SETTINGS_SOFT_RESET		BIT(7)
+#define IQS62X_SYS_SETTINGS_ACK_RESET		BIT(6)
+#define IQS62X_SYS_SETTINGS_EVENT_MODE		BIT(5)
+#define IQS62X_SYS_SETTINGS_CLK_DIV		BIT(4)
+#define IQS62X_SYS_SETTINGS_REDO_ATI		BIT(1)
+
+#define IQS62X_PWR_SETTINGS			0xD2
+#define IQS62X_PWR_SETTINGS_DIS_AUTO		BIT(5)
+#define IQS62X_PWR_SETTINGS_PWR_MODE_MASK	(BIT(4) | BIT(3))
+#define IQS62X_PWR_SETTINGS_PWR_MODE_HALT	(BIT(4) | BIT(3))
+#define IQS62X_PWR_SETTINGS_PWR_MODE_NORM	0
+
+#define IQS62X_OTP_CMD				0xF0
+#define IQS62X_OTP_CMD_FG3			0x13
+#define IQS62X_OTP_DATA				0xF1
+#define IQS62X_MAX_REG				0xFF
+
+#define IQS62X_HALL_CAL_MASK			GENMASK(3, 0)
+
+#define IQS62X_FW_REC_TYPE_INFO			0
+#define IQS62X_FW_REC_TYPE_PROD			1
+#define IQS62X_FW_REC_TYPE_HALL			2
+#define IQS62X_FW_REC_TYPE_MASK			3
+#define IQS62X_FW_REC_TYPE_DATA			4
+
+#define IQS62X_ATI_POLL_SLEEP_US		10000
+#define IQS62X_ATI_POLL_TIMEOUT_US		500000
+#define IQS62X_ATI_STABLE_DELAY_MS		150
+
+struct iqs62x_fw_rec {
+	u8 type;
+	u8 addr;
+	u8 len;
+	u8 data;
+} __packed;
+
+struct iqs62x_fw_blk {
+	struct list_head list;
+	u8 addr;
+	u8 mask;
+	u8 len;
+	u8 data[];
+};
+
+struct iqs62x_info {
+	u8 prod_num;
+	u8 sw_num;
+	u8 hw_num;
+} __packed;
+
+static int iqs62x_dev_init(struct iqs62x_core *iqs62x)
+{
+	struct iqs62x_fw_blk *fw_blk;
+	unsigned int val;
+	int ret;
+	u8 clk_div = 1;
+
+	list_for_each_entry(fw_blk, &iqs62x->fw_blk_head, list) {
+		if (fw_blk->mask)
+			ret = regmap_update_bits(iqs62x->regmap, fw_blk->addr,
+						 fw_blk->mask, *fw_blk->data);
+		else
+			ret = regmap_raw_write(iqs62x->regmap, fw_blk->addr,
+					       fw_blk->data, fw_blk->len);
+		if (ret)
+			return ret;
+	}
+
+	switch (iqs62x->dev_desc->prod_num) {
+	case IQS620_PROD_NUM:
+	case IQS622_PROD_NUM:
+		ret = regmap_read(iqs62x->regmap,
+				  iqs62x->dev_desc->prox_settings, &val);
+		if (ret)
+			return ret;
+
+		if (val & IQS620_PROX_SETTINGS_4_SAR_EN)
+			iqs62x->ui_sel = IQS62X_UI_SAR1;
+
+		/* fall through */
+
+	case IQS621_PROD_NUM:
+		ret = regmap_write(iqs62x->regmap, IQS620_GLBL_EVENT_MASK,
+				   IQS620_GLBL_EVENT_MASK_PMU |
+				   iqs62x->dev_desc->prox_mask |
+				   iqs62x->dev_desc->sar_mask |
+				   iqs62x->dev_desc->hall_mask |
+				   iqs62x->dev_desc->hyst_mask |
+				   iqs62x->dev_desc->temp_mask |
+				   iqs62x->dev_desc->als_mask |
+				   iqs62x->dev_desc->ir_mask);
+		if (ret)
+			return ret;
+		break;
+
+	default:
+		ret = regmap_write(iqs62x->regmap, IQS624_HALL_UI,
+				   IQS624_HALL_UI_WHL_EVENT |
+				   IQS624_HALL_UI_INT_EVENT |
+				   IQS624_HALL_UI_AUTO_CAL);
+		if (ret)
+			return ret;
+
+		/*
+		 * The IQS625 default interval divider is below the minimum
+		 * permissible value, and the datasheet mandates that it is
+		 * corrected during initialization (unless an updated value
+		 * has already been provided by firmware).
+		 *
+		 * To protect against an unacceptably low user-entered value
+		 * stored in the firmware, the same check is extended to the
+		 * IQS624 as well.
+		 */
+		ret = regmap_read(iqs62x->regmap, IQS624_INTERVAL_DIV, &val);
+		if (ret)
+			return ret;
+
+		if (val >= iqs62x->dev_desc->interval_div)
+			break;
+
+		ret = regmap_write(iqs62x->regmap, IQS624_INTERVAL_DIV,
+				   iqs62x->dev_desc->interval_div);
+		if (ret)
+			return ret;
+	}
+
+	ret = regmap_read(iqs62x->regmap, IQS62X_SYS_SETTINGS, &val);
+	if (ret)
+		return ret;
+
+	if (val & IQS62X_SYS_SETTINGS_CLK_DIV)
+		clk_div = iqs62x->dev_desc->clk_div;
+
+	ret = regmap_write(iqs62x->regmap, IQS62X_SYS_SETTINGS, val |
+			   IQS62X_SYS_SETTINGS_ACK_RESET |
+			   IQS62X_SYS_SETTINGS_EVENT_MODE |
+			   IQS62X_SYS_SETTINGS_REDO_ATI);
+	if (ret)
+		return ret;
+
+	ret = regmap_read_poll_timeout(iqs62x->regmap, IQS62X_SYS_FLAGS, val,
+				       !(val & IQS62X_SYS_FLAGS_IN_ATI),
+				       IQS62X_ATI_POLL_SLEEP_US,
+				       IQS62X_ATI_POLL_TIMEOUT_US * clk_div);
+	if (ret)
+		return ret;
+
+	msleep(IQS62X_ATI_STABLE_DELAY_MS * clk_div);
+
+	return 0;
+}
+
+static int iqs62x_firmware_parse(struct iqs62x_core *iqs62x,
+				 const struct firmware *fw)
+{
+	struct i2c_client *client = iqs62x->client;
+	struct iqs62x_fw_rec *fw_rec;
+	struct iqs62x_fw_blk *fw_blk;
+	unsigned int val;
+	size_t pos = 0;
+	int ret = 0;
+	u8 mask, len, *data;
+	u8 hall_cal_index = 0;
+
+	while (pos < fw->size) {
+		if (pos + sizeof(*fw_rec) > fw->size) {
+			ret = -EINVAL;
+			break;
+		}
+		fw_rec = (struct iqs62x_fw_rec *)(fw->data + pos);
+		pos += sizeof(*fw_rec);
+
+		if (pos + fw_rec->len - 1 > fw->size) {
+			ret = -EINVAL;
+			break;
+		}
+		pos += fw_rec->len - 1;
+
+		switch (fw_rec->type) {
+		case IQS62X_FW_REC_TYPE_INFO:
+			continue;
+
+		case IQS62X_FW_REC_TYPE_PROD:
+			if (fw_rec->data == iqs62x->dev_desc->prod_num)
+				continue;
+
+			dev_err(&client->dev,
+				"Incompatible product number: 0x%02X\n",
+				fw_rec->data);
+			ret = -EINVAL;
+			break;
+
+		case IQS62X_FW_REC_TYPE_HALL:
+			if (!hall_cal_index) {
+				ret = regmap_write(iqs62x->regmap,
+						   IQS62X_OTP_CMD,
+						   IQS62X_OTP_CMD_FG3);
+				if (ret)
+					break;
+
+				ret = regmap_read(iqs62x->regmap,
+						  IQS62X_OTP_DATA, &val);
+				if (ret)
+					break;
+
+				hall_cal_index = val & IQS62X_HALL_CAL_MASK;
+				if (!hall_cal_index) {
+					dev_err(&client->dev,
+						"Uncalibrated device\n");
+					ret = -ENODATA;
+					break;
+				}
+			}
+
+			if (hall_cal_index > fw_rec->len) {
+				ret = -EINVAL;
+				break;
+			}
+
+			mask = 0;
+			data = &fw_rec->data + hall_cal_index - 1;
+			len = sizeof(*data);
+			break;
+
+		case IQS62X_FW_REC_TYPE_MASK:
+			if (fw_rec->len < (sizeof(mask) + sizeof(*data))) {
+				ret = -EINVAL;
+				break;
+			}
+
+			mask = fw_rec->data;
+			data = &fw_rec->data + sizeof(mask);
+			len = sizeof(*data);
+			break;
+
+		case IQS62X_FW_REC_TYPE_DATA:
+			mask = 0;
+			data = &fw_rec->data;
+			len = fw_rec->len;
+			break;
+
+		default:
+			dev_err(&client->dev,
+				"Unrecognized record type: 0x%02X\n",
+				fw_rec->type);
+			ret = -EINVAL;
+		}
+
+		if (ret)
+			break;
+
+		fw_blk = devm_kzalloc(&client->dev,
+				      struct_size(fw_blk, data, len),
+				      GFP_KERNEL);
+		if (!fw_blk) {
+			ret = -ENOMEM;
+			break;
+		}
+
+		fw_blk->addr = fw_rec->addr;
+		fw_blk->mask = mask;
+		fw_blk->len = len;
+		memcpy(fw_blk->data, data, len);
+
+		list_add(&fw_blk->list, &iqs62x->fw_blk_head);
+	}
+
+	release_firmware(fw);
+
+	return ret;
+}
+
+const struct iqs62x_event_desc iqs62x_events[IQS62X_NUM_EVENTS] = {
+	[IQS62X_EVENT_PROX_CH0_T] = {
+		.reg	= IQS62X_EVENT_PROX,
+		.mask	= BIT(4),
+		.val	= BIT(4),
+	},
+	[IQS62X_EVENT_PROX_CH0_P] = {
+		.reg	= IQS62X_EVENT_PROX,
+		.mask	= BIT(0),
+		.val	= BIT(0),
+	},
+	[IQS62X_EVENT_PROX_CH1_T] = {
+		.reg	= IQS62X_EVENT_PROX,
+		.mask	= BIT(5),
+		.val	= BIT(5),
+	},
+	[IQS62X_EVENT_PROX_CH1_P] = {
+		.reg	= IQS62X_EVENT_PROX,
+		.mask	= BIT(1),
+		.val	= BIT(1),
+	},
+	[IQS62X_EVENT_PROX_CH2_T] = {
+		.reg	= IQS62X_EVENT_PROX,
+		.mask	= BIT(6),
+		.val	= BIT(6),
+	},
+	[IQS62X_EVENT_PROX_CH2_P] = {
+		.reg	= IQS62X_EVENT_PROX,
+		.mask	= BIT(2),
+		.val	= BIT(2),
+	},
+	[IQS62X_EVENT_HYST_POS_T] = {
+		.reg	= IQS62X_EVENT_HYST,
+		.mask	= BIT(6) | BIT(7),
+		.val	= BIT(6),
+	},
+	[IQS62X_EVENT_HYST_POS_P] = {
+		.reg	= IQS62X_EVENT_HYST,
+		.mask	= BIT(5) | BIT(7),
+		.val	= BIT(5),
+	},
+	[IQS62X_EVENT_HYST_NEG_T] = {
+		.reg	= IQS62X_EVENT_HYST,
+		.mask	= BIT(6) | BIT(7),
+		.val	= BIT(6) | BIT(7),
+	},
+	[IQS62X_EVENT_HYST_NEG_P] = {
+		.reg	= IQS62X_EVENT_HYST,
+		.mask	= BIT(5) | BIT(7),
+		.val	= BIT(5) | BIT(7),
+	},
+	[IQS62X_EVENT_SAR1_ACT] = {
+		.reg	= IQS62X_EVENT_HYST,
+		.mask	= BIT(4),
+		.val	= BIT(4),
+	},
+	[IQS62X_EVENT_SAR1_QRD] = {
+		.reg	= IQS62X_EVENT_HYST,
+		.mask	= BIT(2),
+		.val	= BIT(2),
+	},
+	[IQS62X_EVENT_SAR1_MOVE] = {
+		.reg	= IQS62X_EVENT_HYST,
+		.mask	= BIT(1),
+		.val	= BIT(1),
+	},
+	[IQS62X_EVENT_SAR1_HALT] = {
+		.reg	= IQS62X_EVENT_HYST,
+		.mask	= BIT(0),
+		.val	= BIT(0),
+	},
+	[IQS62X_EVENT_WHEEL_UP] = {
+		.reg	= IQS62X_EVENT_WHEEL,
+		.mask	= BIT(7) | BIT(6),
+		.val	= BIT(7),
+	},
+	[IQS62X_EVENT_WHEEL_DN] = {
+		.reg	= IQS62X_EVENT_WHEEL,
+		.mask	= BIT(7) | BIT(6),
+		.val	= BIT(7) | BIT(6),
+	},
+	[IQS62X_EVENT_HALL_N_T] = {
+		.reg	= IQS62X_EVENT_HALL,
+		.mask	= BIT(2) | BIT(0),
+		.val	= BIT(2),
+	},
+	[IQS62X_EVENT_HALL_N_P] = {
+		.reg	= IQS62X_EVENT_HALL,
+		.mask	= BIT(1) | BIT(0),
+		.val	= BIT(1),
+	},
+	[IQS62X_EVENT_HALL_S_T] = {
+		.reg	= IQS62X_EVENT_HALL,
+		.mask	= BIT(2) | BIT(0),
+		.val	= BIT(2) | BIT(0),
+	},
+	[IQS62X_EVENT_HALL_S_P] = {
+		.reg	= IQS62X_EVENT_HALL,
+		.mask	= BIT(1) | BIT(0),
+		.val	= BIT(1) | BIT(0),
+	},
+	[IQS62X_EVENT_SYS_RESET] = {
+		.reg	= IQS62X_EVENT_SYS,
+		.mask	= BIT(7),
+		.val	= BIT(7),
+	},
+};
+EXPORT_SYMBOL_GPL(iqs62x_events);
+
+static irqreturn_t iqs62x_irq(int irq, void *context)
+{
+	struct iqs62x_core *iqs62x = context;
+	struct i2c_client *client = iqs62x->client;
+	struct iqs62x_event_data event_data;
+	struct iqs62x_event_desc event_desc;
+	enum iqs62x_event_reg event_reg;
+	unsigned long event_flags = 0;
+	int ret, i, j;
+	u8 event_map[IQS62X_EVENT_SIZE];
+
+	/*
+	 * The device asserts the RDY output to signal the beginning of a
+	 * communication window, which is closed by an I2C stop condition.
+	 * As such, all interrupt status is captured in a single read and
+	 * broadcast to any interested sub-device drivers.
+	 */
+	ret = regmap_raw_read(iqs62x->regmap, IQS62X_SYS_FLAGS, event_map,
+			      sizeof(event_map));
+	if (ret) {
+		dev_err(&client->dev, "Failed to read device status: %d\n",
+			ret);
+		return IRQ_NONE;
+	}
+
+	for (i = 0; i < sizeof(event_map); i++) {
+		event_reg = iqs62x->dev_desc->event_regs[iqs62x->ui_sel][i];
+
+		switch (event_reg) {
+		case IQS62X_EVENT_UI_LO:
+			event_data.ui_data = get_unaligned_le16(&event_map[i]);
+
+			/* fall through */
+
+		case IQS62X_EVENT_UI_HI:
+		case IQS62X_EVENT_NONE:
+			continue;
+
+		case IQS62X_EVENT_ALS:
+			event_data.als_flags = event_map[i];
+			continue;
+
+		case IQS62X_EVENT_IR:
+			event_data.ir_flags = event_map[i];
+			continue;
+
+		case IQS62X_EVENT_INTER:
+			event_data.interval = event_map[i];
+			continue;
+
+		case IQS62X_EVENT_HYST:
+			event_map[i] <<= iqs62x->dev_desc->hyst_shift;
+
+			/* fall through */
+
+		case IQS62X_EVENT_WHEEL:
+		case IQS62X_EVENT_HALL:
+		case IQS62X_EVENT_PROX:
+		case IQS62X_EVENT_SYS:
+			break;
+		}
+
+		for (j = 0; j < IQS62X_NUM_EVENTS; j++) {
+			event_desc = iqs62x_events[j];
+
+			if (event_desc.reg != event_reg)
+				continue;
+
+			if ((event_map[i] & event_desc.mask) == event_desc.val)
+				event_flags |= BIT(j);
+		}
+	}
+
+	/*
+	 * The device resets itself in response to the I2C master stalling
+	 * communication past a fixed timeout. In this case, all registers
+	 * are restored and any interested sub-device drivers are notified.
+	 */
+	if (event_flags & BIT(IQS62X_EVENT_SYS_RESET)) {
+		dev_err(&client->dev, "Unexpected device reset\n");
+
+		ret = iqs62x_dev_init(iqs62x);
+		if (ret) {
+			dev_err(&client->dev,
+				"Failed to re-initialize device: %d\n", ret);
+			return IRQ_NONE;
+		}
+	}
+
+	ret = blocking_notifier_call_chain(&iqs62x->nh, event_flags,
+					   &event_data);
+	if (ret & NOTIFY_STOP_MASK)
+		return IRQ_NONE;
+
+	/*
+	 * Once the communication window is closed, a small delay is added to
+	 * ensure the device's RDY output has been deasserted by the time the
+	 * interrupt handler returns.
+	 */
+	usleep_range(50, 100);
+
+	return IRQ_HANDLED;
+}
+
+static void iqs62x_firmware_load(const struct firmware *fw, void *context)
+{
+	struct iqs62x_core *iqs62x = context;
+	struct i2c_client *client = iqs62x->client;
+	int ret;
+
+	if (fw) {
+		ret = iqs62x_firmware_parse(iqs62x, fw);
+		if (ret) {
+			dev_err(&client->dev, "Failed to parse firmware: %d\n",
+				ret);
+			goto err_out;
+		}
+	}
+
+	ret = iqs62x_dev_init(iqs62x);
+	if (ret) {
+		dev_err(&client->dev, "Failed to initialize device: %d\n", ret);
+		goto err_out;
+	}
+
+	ret = devm_request_threaded_irq(&client->dev, client->irq,
+					NULL, iqs62x_irq, IRQF_ONESHOT,
+					client->name, iqs62x);
+	if (ret) {
+		dev_err(&client->dev, "Failed to request IRQ: %d\n", ret);
+		goto err_out;
+	}
+
+	ret = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_NONE,
+				   iqs62x->dev_desc->sub_devs,
+				   iqs62x->dev_desc->num_sub_devs,
+				   NULL, 0, NULL);
+	if (ret)
+		dev_err(&client->dev, "Failed to add sub-devices: %d\n", ret);
+
+err_out:
+	complete_all(&iqs62x->fw_done);
+}
+
+static const struct mfd_cell iqs620at_sub_devs[] = {
+	{
+		.name = "iqs62x-keys",
+		.of_compatible = "azoteq,iqs620a-keys",
+	},
+	{
+		.name = "iqs620a-pwm",
+		.of_compatible = "azoteq,iqs620a-pwm",
+	},
+	{ .name = "iqs620at-temp", },
+};
+
+static const struct mfd_cell iqs620a_sub_devs[] = {
+	{
+		.name = "iqs62x-keys",
+		.of_compatible = "azoteq,iqs620a-keys",
+	},
+	{
+		.name = "iqs620a-pwm",
+		.of_compatible = "azoteq,iqs620a-pwm",
+	},
+};
+
+static const struct mfd_cell iqs621_sub_devs[] = {
+	{
+		.name = "iqs62x-keys",
+		.of_compatible = "azoteq,iqs621-keys",
+	},
+	{ .name = "iqs621-als", },
+};
+
+static const struct mfd_cell iqs622_sub_devs[] = {
+	{
+		.name = "iqs62x-keys",
+		.of_compatible = "azoteq,iqs622-keys",
+	},
+	{ .name = "iqs621-als", },
+};
+
+static const struct mfd_cell iqs624_sub_devs[] = {
+	{
+		.name = "iqs62x-keys",
+		.of_compatible = "azoteq,iqs624-keys",
+	},
+	{ .name = "iqs624-pos", },
+};
+
+static const struct mfd_cell iqs625_sub_devs[] = {
+	{
+		.name = "iqs62x-keys",
+		.of_compatible = "azoteq,iqs625-keys",
+	},
+	{ .name = "iqs624-pos", },
+};
+
+static const u8 iqs620at_cal_regs[] = {
+	IQS620_TEMP_CAL_MULT,
+	IQS620_TEMP_CAL_DIV,
+	IQS620_TEMP_CAL_OFFS,
+};
+
+static const u8 iqs621_cal_regs[] = {
+	IQS621_ALS_CAL_DIV_LUX,
+	IQS621_ALS_CAL_DIV_IR,
+};
+
+static const enum iqs62x_event_reg iqs620a_event_regs[][IQS62X_EVENT_SIZE] = {
+	[IQS62X_UI_PROX] = {
+		IQS62X_EVENT_SYS,	/* 0x10 */
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_PROX,	/* 0x12 */
+		IQS62X_EVENT_HYST,	/* 0x13 */
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_HALL,	/* 0x16 */
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_NONE,
+	},
+	[IQS62X_UI_SAR1] = {
+		IQS62X_EVENT_SYS,	/* 0x10 */
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_HYST,	/* 0x13 */
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_HALL,	/* 0x16 */
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_NONE,
+	},
+};
+
+static const enum iqs62x_event_reg iqs621_event_regs[][IQS62X_EVENT_SIZE] = {
+	[IQS62X_UI_PROX] = {
+		IQS62X_EVENT_SYS,	/* 0x10 */
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_PROX,	/* 0x12 */
+		IQS62X_EVENT_HYST,	/* 0x13 */
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_ALS,	/* 0x16 */
+		IQS62X_EVENT_UI_LO,	/* 0x17 */
+		IQS62X_EVENT_UI_HI,	/* 0x18 */
+		IQS62X_EVENT_HALL,	/* 0x19 */
+	},
+};
+
+static const enum iqs62x_event_reg iqs622_event_regs[][IQS62X_EVENT_SIZE] = {
+	[IQS62X_UI_PROX] = {
+		IQS62X_EVENT_SYS,	/* 0x10 */
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_PROX,	/* 0x12 */
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_ALS,	/* 0x14 */
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_IR,	/* 0x16 */
+		IQS62X_EVENT_UI_LO,	/* 0x17 */
+		IQS62X_EVENT_UI_HI,	/* 0x18 */
+		IQS62X_EVENT_HALL,	/* 0x19 */
+	},
+	[IQS62X_UI_SAR1] = {
+		IQS62X_EVENT_SYS,	/* 0x10 */
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_HYST,	/* 0x13 */
+		IQS62X_EVENT_ALS,	/* 0x14 */
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_IR,	/* 0x16 */
+		IQS62X_EVENT_UI_LO,	/* 0x17 */
+		IQS62X_EVENT_UI_HI,	/* 0x18 */
+		IQS62X_EVENT_HALL,	/* 0x19 */
+	},
+};
+
+static const enum iqs62x_event_reg iqs624_event_regs[][IQS62X_EVENT_SIZE] = {
+	[IQS62X_UI_PROX] = {
+		IQS62X_EVENT_SYS,	/* 0x10 */
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_PROX,	/* 0x12 */
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_WHEEL,	/* 0x14 */
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_UI_LO,	/* 0x16 */
+		IQS62X_EVENT_UI_HI,	/* 0x17 */
+		IQS62X_EVENT_INTER,	/* 0x18 */
+		IQS62X_EVENT_NONE,
+	},
+};
+
+static const enum iqs62x_event_reg iqs625_event_regs[][IQS62X_EVENT_SIZE] = {
+	[IQS62X_UI_PROX] = {
+		IQS62X_EVENT_SYS,	/* 0x10 */
+		IQS62X_EVENT_PROX,	/* 0x11 */
+		IQS62X_EVENT_INTER,	/* 0x12 */
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_NONE,
+	},
+};
+
+static const struct iqs62x_dev_desc iqs62x_devs[] = {
+	{
+		.dev_name	= "iqs620at",
+		.sub_devs	= iqs620at_sub_devs,
+		.num_sub_devs	= ARRAY_SIZE(iqs620at_sub_devs),
+
+		.prod_num	= IQS620_PROD_NUM,
+		.sw_num		= 0x08,
+		.cal_regs	= iqs620at_cal_regs,
+		.num_cal_regs	= ARRAY_SIZE(iqs620at_cal_regs),
+
+		.prox_mask	= BIT(0),
+		.sar_mask	= BIT(1) | BIT(7),
+		.hall_mask	= BIT(2),
+		.hyst_mask	= BIT(3),
+		.temp_mask	= BIT(4),
+
+		.prox_settings	= IQS620_PROX_SETTINGS_4,
+		.hall_flags	= IQS620_HALL_FLAGS,
+
+		.clk_div	= 4,
+		.fw_name	= "iqs620a.bin",
+		.event_regs	= &iqs620a_event_regs[IQS62X_UI_PROX],
+	},
+	{
+		.dev_name	= "iqs620a",
+		.sub_devs	= iqs620a_sub_devs,
+		.num_sub_devs	= ARRAY_SIZE(iqs620a_sub_devs),
+
+		.prod_num	= IQS620_PROD_NUM,
+		.sw_num		= 0x08,
+
+		.prox_mask	= BIT(0),
+		.sar_mask	= BIT(1) | BIT(7),
+		.hall_mask	= BIT(2),
+		.hyst_mask	= BIT(3),
+		.temp_mask	= BIT(4),
+
+		.prox_settings	= IQS620_PROX_SETTINGS_4,
+		.hall_flags	= IQS620_HALL_FLAGS,
+
+		.clk_div	= 4,
+		.fw_name	= "iqs620a.bin",
+		.event_regs	= &iqs620a_event_regs[IQS62X_UI_PROX],
+	},
+	{
+		.dev_name	= "iqs621",
+		.sub_devs	= iqs621_sub_devs,
+		.num_sub_devs	= ARRAY_SIZE(iqs621_sub_devs),
+
+		.prod_num	= IQS621_PROD_NUM,
+		.sw_num		= 0x09,
+		.cal_regs	= iqs621_cal_regs,
+		.num_cal_regs	= ARRAY_SIZE(iqs621_cal_regs),
+
+		.prox_mask	= BIT(0),
+		.hall_mask	= BIT(1),
+		.als_mask	= BIT(2),
+		.hyst_mask	= BIT(3),
+		.temp_mask	= BIT(4),
+
+		.als_flags	= IQS621_ALS_FLAGS,
+		.hall_flags	= IQS621_HALL_FLAGS,
+		.hyst_shift	= 5,
+
+		.clk_div	= 2,
+		.fw_name	= "iqs621.bin",
+		.event_regs	= &iqs621_event_regs[IQS62X_UI_PROX],
+	},
+	{
+		.dev_name	= "iqs622",
+		.sub_devs	= iqs622_sub_devs,
+		.num_sub_devs	= ARRAY_SIZE(iqs622_sub_devs),
+
+		.prod_num	= IQS622_PROD_NUM,
+		.sw_num		= 0x06,
+
+		.prox_mask	= BIT(0),
+		.sar_mask	= BIT(1),
+		.hall_mask	= BIT(2),
+		.als_mask	= BIT(3),
+		.ir_mask	= BIT(4),
+
+		.prox_settings	= IQS622_PROX_SETTINGS_4,
+		.als_flags	= IQS622_ALS_FLAGS,
+		.hall_flags	= IQS622_HALL_FLAGS,
+
+		.clk_div	= 2,
+		.fw_name	= "iqs622.bin",
+		.event_regs	= &iqs622_event_regs[IQS62X_UI_PROX],
+	},
+	{
+		.dev_name	= "iqs624",
+		.sub_devs	= iqs624_sub_devs,
+		.num_sub_devs	= ARRAY_SIZE(iqs624_sub_devs),
+
+		.prod_num	= IQS624_PROD_NUM,
+		.sw_num		= 0x0B,
+
+		.interval	= IQS624_INTERVAL_NUM,
+		.interval_div	= 3,
+
+		.clk_div	= 2,
+		.fw_name	= "iqs624.bin",
+		.event_regs	= &iqs624_event_regs[IQS62X_UI_PROX],
+	},
+	{
+		.dev_name	= "iqs625",
+		.sub_devs	= iqs625_sub_devs,
+		.num_sub_devs	= ARRAY_SIZE(iqs625_sub_devs),
+
+		.prod_num	= IQS625_PROD_NUM,
+		.sw_num		= 0x0B,
+
+		.interval	= IQS625_INTERVAL_NUM,
+		.interval_div	= 10,
+
+		.clk_div	= 2,
+		.fw_name	= "iqs625.bin",
+		.event_regs	= &iqs625_event_regs[IQS62X_UI_PROX],
+	},
+};
+
+static const struct regmap_config iqs62x_map_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = IQS62X_MAX_REG,
+};
+
+static int iqs62x_probe(struct i2c_client *client)
+{
+	struct iqs62x_core *iqs62x;
+	struct iqs62x_info info;
+	unsigned int val;
+	int ret, i, j;
+	u8 sw_num = 0;
+	const char *fw_name = NULL;
+
+	iqs62x = devm_kzalloc(&client->dev, sizeof(*iqs62x), GFP_KERNEL);
+	if (!iqs62x)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, iqs62x);
+	iqs62x->client = client;
+
+	BLOCKING_INIT_NOTIFIER_HEAD(&iqs62x->nh);
+	INIT_LIST_HEAD(&iqs62x->fw_blk_head);
+	init_completion(&iqs62x->fw_done);
+
+	iqs62x->regmap = devm_regmap_init_i2c(client, &iqs62x_map_config);
+	if (IS_ERR(iqs62x->regmap)) {
+		ret = PTR_ERR(iqs62x->regmap);
+		dev_err(&client->dev, "Failed to initialize register map: %d\n",
+			ret);
+		return ret;
+	}
+
+	ret = regmap_raw_read(iqs62x->regmap, IQS62X_PROD_NUM, &info,
+			      sizeof(info));
+	if (ret)
+		return ret;
+
+	/*
+	 * The following sequence validates the device's product and software
+	 * numbers. It then determines if the device is factory-calibrated by
+	 * checking for nonzero values in the device's designated calibration
+	 * registers (if applicable). Depending on the device, the absence of
+	 * calibration data indicates a reduced feature set or invalid device.
+	 *
+	 * For devices given in both calibrated and uncalibrated versions, the
+	 * calibrated version (e.g. IQS620AT) appears first in the iqs62x_devs
+	 * array. The uncalibrated version (e.g. IQS620A) appears next and has
+	 * the same product and software numbers, but no calibration registers
+	 * are specified.
+	 */
+	for (i = 0; i < ARRAY_SIZE(iqs62x_devs); i++) {
+		if (info.prod_num != iqs62x_devs[i].prod_num)
+			continue;
+
+		iqs62x->dev_desc = &iqs62x_devs[i];
+
+		if (info.sw_num < iqs62x->dev_desc->sw_num)
+			continue;
+
+		sw_num = info.sw_num;
+
+		/*
+		 * Read each of the device's designated calibration registers,
+		 * if any, and exit from the inner loop early if any are equal
+		 * to zero (indicating the device is uncalibrated). This could
+		 * be acceptable depending on the device (e.g. IQS620A instead
+		 * of IQS620AT).
+		 */
+		for (j = 0; j < iqs62x->dev_desc->num_cal_regs; j++) {
+			ret = regmap_read(iqs62x->regmap,
+					  iqs62x->dev_desc->cal_regs[j], &val);
+			if (ret)
+				return ret;
+
+			if (!val)
+				break;
+		}
+
+		/*
+		 * If the number of nonzero values read from the device equals
+		 * the number of designated calibration registers (which could
+		 * be zero), exit from the outer loop early to signal that the
+		 * device's product and software numbers match a known device,
+		 * and the device is calibrated (if applicable).
+		 */
+		if (j == iqs62x->dev_desc->num_cal_regs)
+			break;
+	}
+
+	if (!iqs62x->dev_desc) {
+		dev_err(&client->dev, "Unrecognized product number: 0x%02X\n",
+			info.prod_num);
+		return -EINVAL;
+	}
+
+	if (!sw_num) {
+		dev_err(&client->dev, "Unrecognized software number: 0x%02X\n",
+			info.sw_num);
+		return -EINVAL;
+	}
+
+	if (i == ARRAY_SIZE(iqs62x_devs)) {
+		dev_err(&client->dev, "Uncalibrated device\n");
+		return -ENODATA;
+	}
+
+	device_property_read_string(&client->dev, "firmware-name", &fw_name);
+
+	ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_HOTPLUG,
+				      fw_name ? : iqs62x->dev_desc->fw_name,
+				      &client->dev, GFP_KERNEL, iqs62x,
+				      iqs62x_firmware_load);
+	if (ret)
+		dev_err(&client->dev, "Failed to request firmware: %d\n", ret);
+
+	return ret;
+}
+
+static int iqs62x_remove(struct i2c_client *client)
+{
+	struct iqs62x_core *iqs62x = i2c_get_clientdata(client);
+
+	wait_for_completion(&iqs62x->fw_done);
+
+	return 0;
+}
+
+static int __maybe_unused iqs62x_suspend(struct device *dev)
+{
+	struct iqs62x_core *iqs62x = dev_get_drvdata(dev);
+	int ret;
+
+	wait_for_completion(&iqs62x->fw_done);
+
+	/*
+	 * As per the datasheet, automatic mode switching must be disabled
+	 * before the device is placed in or taken out of halt mode.
+	 */
+	ret = regmap_update_bits(iqs62x->regmap, IQS62X_PWR_SETTINGS,
+				 IQS62X_PWR_SETTINGS_DIS_AUTO, 0xFF);
+	if (ret)
+		return ret;
+
+	return regmap_update_bits(iqs62x->regmap, IQS62X_PWR_SETTINGS,
+				  IQS62X_PWR_SETTINGS_PWR_MODE_MASK,
+				  IQS62X_PWR_SETTINGS_PWR_MODE_HALT);
+}
+
+static int __maybe_unused iqs62x_resume(struct device *dev)
+{
+	struct iqs62x_core *iqs62x = dev_get_drvdata(dev);
+	int ret;
+
+	ret = regmap_update_bits(iqs62x->regmap, IQS62X_PWR_SETTINGS,
+				 IQS62X_PWR_SETTINGS_PWR_MODE_MASK,
+				 IQS62X_PWR_SETTINGS_PWR_MODE_NORM);
+	if (ret)
+		return ret;
+
+	return regmap_update_bits(iqs62x->regmap, IQS62X_PWR_SETTINGS,
+				  IQS62X_PWR_SETTINGS_DIS_AUTO, 0);
+}
+
+static SIMPLE_DEV_PM_OPS(iqs62x_pm, iqs62x_suspend, iqs62x_resume);
+
+static const struct of_device_id iqs62x_of_match[] = {
+	{ .compatible = "azoteq,iqs620a" },
+	{ .compatible = "azoteq,iqs621" },
+	{ .compatible = "azoteq,iqs622" },
+	{ .compatible = "azoteq,iqs624" },
+	{ .compatible = "azoteq,iqs625" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, iqs62x_of_match);
+
+static struct i2c_driver iqs62x_i2c_driver = {
+	.driver = {
+		.name = "iqs62x",
+		.of_match_table = iqs62x_of_match,
+		.pm = &iqs62x_pm,
+	},
+	.probe_new = iqs62x_probe,
+	.remove = iqs62x_remove,
+};
+module_i2c_driver(iqs62x_i2c_driver);
+
+MODULE_AUTHOR("Jeff LaBundy <jeff@labundy.com>");
+MODULE_DESCRIPTION("Azoteq IQS620A/621/622/624/625 Multi-Function Sensors");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 4798d9f..1f4f01b 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -840,7 +840,7 @@ MODULE_DEVICE_TABLE(of, usbhs_omap_dt_ids);
 
 static struct platform_driver usbhs_omap_driver = {
 	.driver = {
-		.name		= (char *)usbhs_driver_name,
+		.name		= usbhs_driver_name,
 		.pm		= &usbhsomap_dev_pm_ops,
 		.of_match_table = usbhs_omap_dt_ids,
 	},
diff --git a/drivers/mfd/omap-usb-tll.c b/drivers/mfd/omap-usb-tll.c
index 265f5e3..4b7f73c 100644
--- a/drivers/mfd/omap-usb-tll.c
+++ b/drivers/mfd/omap-usb-tll.c
@@ -99,7 +99,7 @@
 struct usbtll_omap {
 	void __iomem	*base;
 	int		nch;		/* num. of channels */
-	struct clk	*ch_clk[0];	/* must be the last member */
+	struct clk	*ch_clk[];	/* must be the last member */
 };
 
 /*-------------------------------------------------------------------------*/
@@ -304,7 +304,7 @@ MODULE_DEVICE_TABLE(of, usbtll_omap_dt_ids);
 
 static struct platform_driver usbtll_omap_driver = {
 	.driver = {
-		.name		= (char *)usbtll_driver_name,
+		.name		= usbtll_driver_name,
 		.of_match_table = usbtll_omap_dt_ids,
 	},
 	.probe		= usbtll_omap_probe,
diff --git a/drivers/mfd/qcom-pm8xxx.c b/drivers/mfd/qcom-pm8xxx.c
index 2913332..acd172d 100644
--- a/drivers/mfd/qcom-pm8xxx.c
+++ b/drivers/mfd/qcom-pm8xxx.c
@@ -76,7 +76,7 @@ struct pm_irq_chip {
 	unsigned int		num_masters;
 	const struct pm_irq_data *pm_irq_data;
 	/* MUST BE AT THE END OF THIS STRUCT */
-	u8			config[0];
+	u8			config[];
 };
 
 static int pm8xxx_read_block_irq(struct pm_irq_chip *chip, unsigned int bp,
diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
index a69a674..d109b9f 100644
--- a/drivers/mfd/rk808.c
+++ b/drivers/mfd/rk808.c
@@ -19,7 +19,6 @@
 #include <linux/module.h>
 #include <linux/of_device.h>
 #include <linux/regmap.h>
-#include <linux/syscore_ops.h>
 
 struct rk808_reg_data {
 	int addr;
@@ -186,7 +185,6 @@ static const struct rk808_reg_data rk805_pre_init_reg[] = {
 	{RK805_BUCK4_CONFIG_REG, RK805_BUCK3_4_ILMAX_MASK,
 				 RK805_BUCK4_ILMAX_3500MA},
 	{RK805_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_400MA},
-	{RK805_GPIO_IO_POL_REG, SLP_SD_MSK, SLEEP_FUN},
 	{RK805_THERMAL_REG, TEMP_HOTDIE_MSK, TEMP115C},
 };
 
@@ -449,88 +447,60 @@ static const struct regmap_irq_chip rk818_irq_chip = {
 
 static struct i2c_client *rk808_i2c_client;
 
-static void rk805_device_shutdown(void)
+static void rk808_pm_power_off(void)
 {
 	int ret;
+	unsigned int reg, bit;
 	struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
 
-	if (!rk808)
+	switch (rk808->variant) {
+	case RK805_ID:
+		reg = RK805_DEV_CTRL_REG;
+		bit = DEV_OFF;
+		break;
+	case RK808_ID:
+		reg = RK808_DEVCTRL_REG,
+		bit = DEV_OFF_RST;
+		break;
+	case RK818_ID:
+		reg = RK818_DEVCTRL_REG;
+		bit = DEV_OFF;
+		break;
+	default:
 		return;
-
-	ret = regmap_update_bits(rk808->regmap,
-				 RK805_DEV_CTRL_REG,
-				 DEV_OFF, DEV_OFF);
+	}
+	ret = regmap_update_bits(rk808->regmap, reg, bit, bit);
 	if (ret)
 		dev_err(&rk808_i2c_client->dev, "Failed to shutdown device!\n");
 }
 
-static void rk805_device_shutdown_prepare(void)
+static void rk8xx_shutdown(struct i2c_client *client)
 {
-	int ret;
-	struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
-
-	if (!rk808)
-		return;
-
-	ret = regmap_update_bits(rk808->regmap,
-				 RK805_GPIO_IO_POL_REG,
-				 SLP_SD_MSK, SHUTDOWN_FUN);
-	if (ret)
-		dev_err(&rk808_i2c_client->dev, "Failed to shutdown device!\n");
-}
-
-static void rk808_device_shutdown(void)
-{
-	int ret;
-	struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
-
-	if (!rk808)
-		return;
-
-	ret = regmap_update_bits(rk808->regmap,
-				 RK808_DEVCTRL_REG,
-				 DEV_OFF_RST, DEV_OFF_RST);
-	if (ret)
-		dev_err(&rk808_i2c_client->dev, "Failed to shutdown device!\n");
-}
-
-static void rk818_device_shutdown(void)
-{
-	int ret;
-	struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
-
-	if (!rk808)
-		return;
-
-	ret = regmap_update_bits(rk808->regmap,
-				 RK818_DEVCTRL_REG,
-				 DEV_OFF, DEV_OFF);
-	if (ret)
-		dev_err(&rk808_i2c_client->dev, "Failed to shutdown device!\n");
-}
-
-static void rk8xx_syscore_shutdown(void)
-{
-	struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
+	struct rk808 *rk808 = i2c_get_clientdata(client);
 	int ret;
 
-	if (system_state == SYSTEM_POWER_OFF &&
-	    (rk808->variant == RK809_ID || rk808->variant == RK817_ID)) {
+	switch (rk808->variant) {
+	case RK805_ID:
+		ret = regmap_update_bits(rk808->regmap,
+					 RK805_GPIO_IO_POL_REG,
+					 SLP_SD_MSK,
+					 SHUTDOWN_FUN);
+		break;
+	case RK809_ID:
+	case RK817_ID:
 		ret = regmap_update_bits(rk808->regmap,
 					 RK817_SYS_CFG(3),
 					 RK817_SLPPIN_FUNC_MSK,
 					 SLPPIN_DN_FUN);
-		if (ret) {
-			dev_warn(&rk808_i2c_client->dev,
-				 "Cannot switch to power down function\n");
-		}
+		break;
+	default:
+		return;
 	}
+	if (ret)
+		dev_warn(&client->dev,
+			 "Cannot switch to power down function\n");
 }
 
-static struct syscore_ops rk808_syscore_ops = {
-	.shutdown = rk8xx_syscore_shutdown,
-};
-
 static const struct of_device_id rk808_of_match[] = {
 	{ .compatible = "rockchip,rk805" },
 	{ .compatible = "rockchip,rk808" },
@@ -550,7 +520,7 @@ static int rk808_probe(struct i2c_client *client,
 	const struct mfd_cell *cells;
 	int nr_pre_init_regs;
 	int nr_cells;
-	int pm_off = 0, msb, lsb;
+	int msb, lsb;
 	unsigned char pmic_id_msb, pmic_id_lsb;
 	int ret;
 	int i;
@@ -594,8 +564,6 @@ static int rk808_probe(struct i2c_client *client,
 		nr_pre_init_regs = ARRAY_SIZE(rk805_pre_init_reg);
 		cells = rk805s;
 		nr_cells = ARRAY_SIZE(rk805s);
-		rk808->pm_pwroff_fn = rk805_device_shutdown;
-		rk808->pm_pwroff_prep_fn = rk805_device_shutdown_prepare;
 		break;
 	case RK808_ID:
 		rk808->regmap_cfg = &rk808_regmap_config;
@@ -604,7 +572,6 @@ static int rk808_probe(struct i2c_client *client,
 		nr_pre_init_regs = ARRAY_SIZE(rk808_pre_init_reg);
 		cells = rk808s;
 		nr_cells = ARRAY_SIZE(rk808s);
-		rk808->pm_pwroff_fn = rk808_device_shutdown;
 		break;
 	case RK818_ID:
 		rk808->regmap_cfg = &rk818_regmap_config;
@@ -613,7 +580,6 @@ static int rk808_probe(struct i2c_client *client,
 		nr_pre_init_regs = ARRAY_SIZE(rk818_pre_init_reg);
 		cells = rk818s;
 		nr_cells = ARRAY_SIZE(rk818s);
-		rk808->pm_pwroff_fn = rk818_device_shutdown;
 		break;
 	case RK809_ID:
 	case RK817_ID:
@@ -623,7 +589,6 @@ static int rk808_probe(struct i2c_client *client,
 		nr_pre_init_regs = ARRAY_SIZE(rk817_pre_init_reg);
 		cells = rk817s;
 		nr_cells = ARRAY_SIZE(rk817s);
-		register_syscore_ops(&rk808_syscore_ops);
 		break;
 	default:
 		dev_err(&client->dev, "Unsupported RK8XX ID %lu\n",
@@ -674,17 +639,9 @@ static int rk808_probe(struct i2c_client *client,
 		goto err_irq;
 	}
 
-	pm_off = of_property_read_bool(np,
-				"rockchip,system-power-controller");
-	if (pm_off && !pm_power_off) {
+	if (of_property_read_bool(np, "rockchip,system-power-controller")) {
 		rk808_i2c_client = client;
-		pm_power_off = rk808->pm_pwroff_fn;
-	}
-
-	if (pm_off && !pm_power_off_prepare) {
-		if (!rk808_i2c_client)
-			rk808_i2c_client = client;
-		pm_power_off_prepare = rk808->pm_pwroff_prep_fn;
+		pm_power_off = rk808_pm_power_off;
 	}
 
 	return 0;
@@ -704,25 +661,24 @@ static int rk808_remove(struct i2c_client *client)
 	 * pm_power_off may points to a function from another module.
 	 * Check if the pointer is set by us and only then overwrite it.
 	 */
-	if (rk808->pm_pwroff_fn && pm_power_off == rk808->pm_pwroff_fn)
+	if (pm_power_off == rk808_pm_power_off)
 		pm_power_off = NULL;
 
-	/**
-	 * As above, check if the pointer is set by us before overwrite.
-	 */
-	if (rk808->pm_pwroff_prep_fn &&
-	    pm_power_off_prepare == rk808->pm_pwroff_prep_fn)
-		pm_power_off_prepare = NULL;
-
 	return 0;
 }
 
 static int __maybe_unused rk8xx_suspend(struct device *dev)
 {
-	struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
+	struct rk808 *rk808 = i2c_get_clientdata(to_i2c_client(dev));
 	int ret = 0;
 
 	switch (rk808->variant) {
+	case RK805_ID:
+		ret = regmap_update_bits(rk808->regmap,
+					 RK805_GPIO_IO_POL_REG,
+					 SLP_SD_MSK,
+					 SLEEP_FUN);
+		break;
 	case RK809_ID:
 	case RK817_ID:
 		ret = regmap_update_bits(rk808->regmap,
@@ -739,7 +695,7 @@ static int __maybe_unused rk8xx_suspend(struct device *dev)
 
 static int __maybe_unused rk8xx_resume(struct device *dev)
 {
-	struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
+	struct rk808 *rk808 = i2c_get_clientdata(to_i2c_client(dev));
 	int ret = 0;
 
 	switch (rk808->variant) {
@@ -766,6 +722,7 @@ static struct i2c_driver rk808_i2c_driver = {
 	},
 	.probe    = rk808_probe,
 	.remove   = rk808_remove,
+	.shutdown = rk8xx_shutdown,
 };
 
 module_i2c_driver(rk808_i2c_driver);
diff --git a/drivers/mfd/rn5t618.c b/drivers/mfd/rn5t618.c
index ead2e79..232de50 100644
--- a/drivers/mfd/rn5t618.c
+++ b/drivers/mfd/rn5t618.c
@@ -8,10 +8,13 @@
 
 #include <linux/delay.h>
 #include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
 #include <linux/mfd/core.h>
 #include <linux/mfd/rn5t618.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
+#include <linux/platform_device.h>
 #include <linux/reboot.h>
 #include <linux/regmap.h>
 
@@ -20,6 +23,13 @@ static const struct mfd_cell rn5t618_cells[] = {
 	{ .name = "rn5t618-wdt" },
 };
 
+static const struct mfd_cell rc5t619_cells[] = {
+	{ .name = "rn5t618-adc" },
+	{ .name = "rn5t618-regulator" },
+	{ .name = "rc5t619-rtc" },
+	{ .name = "rn5t618-wdt" },
+};
+
 static bool rn5t618_volatile_reg(struct device *dev, unsigned int reg)
 {
 	switch (reg) {
@@ -32,6 +42,8 @@ static bool rn5t618_volatile_reg(struct device *dev, unsigned int reg)
 	case RN5T618_IR_GPF:
 	case RN5T618_MON_IOIN:
 	case RN5T618_INTMON:
+	case RN5T618_RTC_CTRL1 ... RN5T618_RTC_CTRL2:
+	case RN5T618_RTC_SECONDS ... RN5T618_RTC_YEAR:
 		return true;
 	default:
 		return false;
@@ -46,9 +58,56 @@ static const struct regmap_config rn5t618_regmap_config = {
 	.cache_type	= REGCACHE_RBTREE,
 };
 
+static const struct regmap_irq rc5t619_irqs[] = {
+	REGMAP_IRQ_REG(RN5T618_IRQ_SYS, 0, BIT(0)),
+	REGMAP_IRQ_REG(RN5T618_IRQ_DCDC, 0, BIT(1)),
+	REGMAP_IRQ_REG(RN5T618_IRQ_RTC, 0, BIT(2)),
+	REGMAP_IRQ_REG(RN5T618_IRQ_ADC, 0, BIT(3)),
+	REGMAP_IRQ_REG(RN5T618_IRQ_GPIO, 0, BIT(4)),
+	REGMAP_IRQ_REG(RN5T618_IRQ_CHG, 0, BIT(6)),
+};
+
+static const struct regmap_irq_chip rc5t619_irq_chip = {
+	.name = "rc5t619",
+	.irqs = rc5t619_irqs,
+	.num_irqs = ARRAY_SIZE(rc5t619_irqs),
+	.num_regs = 1,
+	.status_base = RN5T618_INTMON,
+	.mask_base = RN5T618_INTEN,
+	.mask_invert = true,
+};
+
 static struct rn5t618 *rn5t618_pm_power_off;
 static struct notifier_block rn5t618_restart_handler;
 
+static int rn5t618_irq_init(struct rn5t618 *rn5t618)
+{
+	const struct regmap_irq_chip *irq_chip = NULL;
+	int ret;
+
+	if (!rn5t618->irq)
+		return 0;
+
+	switch (rn5t618->variant) {
+	case RC5T619:
+		irq_chip = &rc5t619_irq_chip;
+		break;
+	default:
+		dev_err(rn5t618->dev, "Currently no IRQ support for variant %d\n",
+			(int)rn5t618->variant);
+		return -ENOENT;
+	}
+
+	ret = devm_regmap_add_irq_chip(rn5t618->dev, rn5t618->regmap,
+				       rn5t618->irq,
+				       IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+				       0, irq_chip, &rn5t618->irq_data);
+	if (ret)
+		dev_err(rn5t618->dev, "Failed to register IRQ chip\n");
+
+	return ret;
+}
+
 static void rn5t618_trigger_poweroff_sequence(bool repower)
 {
 	/* disable automatic repower-on */
@@ -87,8 +146,7 @@ static const struct of_device_id rn5t618_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, rn5t618_of_match);
 
-static int rn5t618_i2c_probe(struct i2c_client *i2c,
-			     const struct i2c_device_id *id)
+static int rn5t618_i2c_probe(struct i2c_client *i2c)
 {
 	const struct of_device_id *of_id;
 	struct rn5t618 *priv;
@@ -106,6 +164,8 @@ static int rn5t618_i2c_probe(struct i2c_client *i2c,
 
 	i2c_set_clientdata(i2c, priv);
 	priv->variant = (long)of_id->data;
+	priv->irq = i2c->irq;
+	priv->dev = &i2c->dev;
 
 	priv->regmap = devm_regmap_init_i2c(i2c, &rn5t618_regmap_config);
 	if (IS_ERR(priv->regmap)) {
@@ -114,8 +174,16 @@ static int rn5t618_i2c_probe(struct i2c_client *i2c,
 		return ret;
 	}
 
-	ret = devm_mfd_add_devices(&i2c->dev, -1, rn5t618_cells,
-				   ARRAY_SIZE(rn5t618_cells), NULL, 0, NULL);
+	if (priv->variant == RC5T619)
+		ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE,
+					   rc5t619_cells,
+					   ARRAY_SIZE(rc5t619_cells),
+					   NULL, 0, NULL);
+	else
+		ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE,
+					   rn5t618_cells,
+					   ARRAY_SIZE(rn5t618_cells),
+					   NULL, 0, NULL);
 	if (ret) {
 		dev_err(&i2c->dev, "failed to add sub-devices: %d\n", ret);
 		return ret;
@@ -138,7 +206,7 @@ static int rn5t618_i2c_probe(struct i2c_client *i2c,
 		return ret;
 	}
 
-	return 0;
+	return rn5t618_irq_init(priv);
 }
 
 static int rn5t618_i2c_remove(struct i2c_client *i2c)
@@ -155,19 +223,38 @@ static int rn5t618_i2c_remove(struct i2c_client *i2c)
 	return 0;
 }
 
-static const struct i2c_device_id rn5t618_i2c_id[] = {
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, rn5t618_i2c_id);
+static int __maybe_unused rn5t618_i2c_suspend(struct device *dev)
+{
+	struct rn5t618 *priv = dev_get_drvdata(dev);
+
+	if (priv->irq)
+		disable_irq(priv->irq);
+
+	return 0;
+}
+
+static int __maybe_unused rn5t618_i2c_resume(struct device *dev)
+{
+	struct rn5t618 *priv = dev_get_drvdata(dev);
+
+	if (priv->irq)
+		enable_irq(priv->irq);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(rn5t618_i2c_dev_pm_ops,
+			rn5t618_i2c_suspend,
+			rn5t618_i2c_resume);
 
 static struct i2c_driver rn5t618_i2c_driver = {
 	.driver = {
 		.name = "rn5t618",
 		.of_match_table = of_match_ptr(rn5t618_of_match),
+		.pm = &rn5t618_i2c_dev_pm_ops,
 	},
-	.probe = rn5t618_i2c_probe,
+	.probe_new = rn5t618_i2c_probe,
 	.remove = rn5t618_i2c_remove,
-	.id_table = rn5t618_i2c_id,
 };
 
 module_i2c_driver(rn5t618_i2c_driver);
diff --git a/drivers/mfd/sprd-sc27xx-spi.c b/drivers/mfd/sprd-sc27xx-spi.c
index c0529a1..ebdf2f1 100644
--- a/drivers/mfd/sprd-sc27xx-spi.c
+++ b/drivers/mfd/sprd-sc27xx-spi.c
@@ -10,6 +10,7 @@
 #include <linux/of_device.h>
 #include <linux/regmap.h>
 #include <linux/spi/spi.h>
+#include <uapi/linux/usb/charger.h>
 
 #define SPRD_PMIC_INT_MASK_STATUS	0x0
 #define SPRD_PMIC_INT_RAW_STATUS	0x4
@@ -17,6 +18,16 @@
 
 #define SPRD_SC2731_IRQ_BASE		0x140
 #define SPRD_SC2731_IRQ_NUMS		16
+#define SPRD_SC2731_CHG_DET		0xedc
+
+/* PMIC charger detection definition */
+#define SPRD_PMIC_CHG_DET_DELAY_US	200000
+#define SPRD_PMIC_CHG_DET_TIMEOUT	2000000
+#define SPRD_PMIC_CHG_DET_DONE		BIT(11)
+#define SPRD_PMIC_SDP_TYPE		BIT(7)
+#define SPRD_PMIC_DCP_TYPE		BIT(6)
+#define SPRD_PMIC_CDP_TYPE		BIT(5)
+#define SPRD_PMIC_CHG_TYPE_MASK		GENMASK(7, 5)
 
 struct sprd_pmic {
 	struct regmap *regmap;
@@ -24,12 +35,14 @@ struct sprd_pmic {
 	struct regmap_irq *irqs;
 	struct regmap_irq_chip irq_chip;
 	struct regmap_irq_chip_data *irq_data;
+	const struct sprd_pmic_data *pdata;
 	int irq;
 };
 
 struct sprd_pmic_data {
 	u32 irq_base;
 	u32 num_irqs;
+	u32 charger_det;
 };
 
 /*
@@ -40,8 +53,46 @@ struct sprd_pmic_data {
 static const struct sprd_pmic_data sc2731_data = {
 	.irq_base = SPRD_SC2731_IRQ_BASE,
 	.num_irqs = SPRD_SC2731_IRQ_NUMS,
+	.charger_det = SPRD_SC2731_CHG_DET,
 };
 
+enum usb_charger_type sprd_pmic_detect_charger_type(struct device *dev)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct sprd_pmic *ddata = spi_get_drvdata(spi);
+	const struct sprd_pmic_data *pdata = ddata->pdata;
+	enum usb_charger_type type;
+	u32 val;
+	int ret;
+
+	ret = regmap_read_poll_timeout(ddata->regmap, pdata->charger_det, val,
+				       (val & SPRD_PMIC_CHG_DET_DONE),
+				       SPRD_PMIC_CHG_DET_DELAY_US,
+				       SPRD_PMIC_CHG_DET_TIMEOUT);
+	if (ret) {
+		dev_err(&spi->dev, "failed to detect charger type\n");
+		return UNKNOWN_TYPE;
+	}
+
+	switch (val & SPRD_PMIC_CHG_TYPE_MASK) {
+	case SPRD_PMIC_CDP_TYPE:
+		type = CDP_TYPE;
+		break;
+	case SPRD_PMIC_DCP_TYPE:
+		type = DCP_TYPE;
+		break;
+	case SPRD_PMIC_SDP_TYPE:
+		type = SDP_TYPE;
+		break;
+	default:
+		type = UNKNOWN_TYPE;
+		break;
+	}
+
+	return type;
+}
+EXPORT_SYMBOL_GPL(sprd_pmic_detect_charger_type);
+
 static const struct mfd_cell sprd_pmic_devs[] = {
 	{
 		.name = "sc27xx-wdt",
@@ -181,6 +232,7 @@ static int sprd_pmic_probe(struct spi_device *spi)
 	spi_set_drvdata(spi, ddata);
 	ddata->dev = &spi->dev;
 	ddata->irq = spi->irq;
+	ddata->pdata = pdata;
 
 	ddata->irq_chip.name = dev_name(&spi->dev);
 	ddata->irq_chip.status_base =
diff --git a/drivers/misc/cardreader/rts5227.c b/drivers/misc/cardreader/rts5227.c
index 423fecc..3a9467a 100644
--- a/drivers/misc/cardreader/rts5227.c
+++ b/drivers/misc/cardreader/rts5227.c
@@ -394,6 +394,7 @@ static const struct pcr_ops rts522a_pcr_ops = {
 void rts522a_init_params(struct rtsx_pcr *pcr)
 {
 	rts5227_init_params(pcr);
+	pcr->ops = &rts522a_pcr_ops;
 	pcr->tx_initial_phase = SET_CLOCK_PHASE(20, 20, 11);
 	pcr->reg_pm_ctrl3 = RTS522A_PM_CTRL3;
 
diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index 282c9ef..9ff18d4 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -227,6 +227,7 @@ MODULE_DEVICE_TABLE(of, at24_of_match);
 
 static const struct acpi_device_id at24_acpi_ids[] = {
 	{ "INT3499",	(kernel_ulong_t)&at24_data_INT3499 },
+	{ "TPF0001",	(kernel_ulong_t)&at24_data_24c1024 },
 	{ /* END OF LIST */ }
 };
 MODULE_DEVICE_TABLE(acpi, at24_acpi_ids);
diff --git a/drivers/misc/habanalabs/command_submission.c b/drivers/misc/habanalabs/command_submission.c
index 0bf0867..409276b 100644
--- a/drivers/misc/habanalabs/command_submission.c
+++ b/drivers/misc/habanalabs/command_submission.c
@@ -129,6 +129,8 @@ static int cs_parser(struct hl_fpriv *hpriv, struct hl_cs_job *job)
 		spin_unlock(&job->user_cb->lock);
 		hl_cb_put(job->user_cb);
 		job->user_cb = NULL;
+	} else if (!rc) {
+		job->job_cb_size = job->user_cb_size;
 	}
 
 	return rc;
@@ -507,7 +509,7 @@ static int _hl_cs_ioctl(struct hl_fpriv *hpriv, void __user *chunks,
 	struct hl_cb *cb;
 	bool int_queues_only = true;
 	u32 size_to_copy;
-	int rc, i, parse_cnt;
+	int rc, i;
 
 	*cs_seq = ULLONG_MAX;
 
@@ -547,7 +549,7 @@ static int _hl_cs_ioctl(struct hl_fpriv *hpriv, void __user *chunks,
 	hl_debugfs_add_cs(cs);
 
 	/* Validate ALL the CS chunks before submitting the CS */
-	for (i = 0, parse_cnt = 0 ; i < num_chunks ; i++, parse_cnt++) {
+	for (i = 0 ; i < num_chunks ; i++) {
 		struct hl_cs_chunk *chunk = &cs_chunk_array[i];
 		enum hl_queue_type queue_type;
 		bool is_kernel_allocated_cb;
@@ -585,10 +587,6 @@ static int _hl_cs_ioctl(struct hl_fpriv *hpriv, void __user *chunks,
 		job->cs = cs;
 		job->user_cb = cb;
 		job->user_cb_size = chunk->cb_size;
-		if (is_kernel_allocated_cb)
-			job->job_cb_size = cb->size;
-		else
-			job->job_cb_size = chunk->cb_size;
 		job->hw_queue_id = chunk->queue_index;
 
 		cs->jobs_in_queue_cnt[job->hw_queue_id]++;
@@ -659,8 +657,8 @@ int hl_cs_ioctl(struct hl_fpriv *hpriv, void *data)
 	struct hl_device *hdev = hpriv->hdev;
 	union hl_cs_args *args = data;
 	struct hl_ctx *ctx = hpriv->ctx;
-	void __user *chunks;
-	u32 num_chunks;
+	void __user *chunks_execute, *chunks_restore;
+	u32 num_chunks_execute, num_chunks_restore;
 	u64 cs_seq = ULONG_MAX;
 	int rc, do_ctx_switch;
 	bool need_soft_reset = false;
@@ -673,13 +671,25 @@ int hl_cs_ioctl(struct hl_fpriv *hpriv, void *data)
 		goto out;
 	}
 
+	chunks_execute = (void __user *) (uintptr_t) args->in.chunks_execute;
+	num_chunks_execute = args->in.num_chunks_execute;
+
+	if (!num_chunks_execute) {
+		dev_err(hdev->dev,
+			"Got execute CS with 0 chunks, context %d\n",
+			ctx->asid);
+		rc = -EINVAL;
+		goto out;
+	}
+
 	do_ctx_switch = atomic_cmpxchg(&ctx->thread_ctx_switch_token, 1, 0);
 
 	if (do_ctx_switch || (args->in.cs_flags & HL_CS_FLAGS_FORCE_RESTORE)) {
 		long ret;
 
-		chunks = (void __user *)(uintptr_t)args->in.chunks_restore;
-		num_chunks = args->in.num_chunks_restore;
+		chunks_restore =
+			(void __user *) (uintptr_t) args->in.chunks_restore;
+		num_chunks_restore = args->in.num_chunks_restore;
 
 		mutex_lock(&hpriv->restore_phase_mutex);
 
@@ -707,13 +717,13 @@ int hl_cs_ioctl(struct hl_fpriv *hpriv, void *data)
 
 		hdev->asic_funcs->restore_phase_topology(hdev);
 
-		if (num_chunks == 0) {
+		if (!num_chunks_restore) {
 			dev_dbg(hdev->dev,
 			"Need to run restore phase but restore CS is empty\n");
 			rc = 0;
 		} else {
-			rc = _hl_cs_ioctl(hpriv, chunks, num_chunks,
-						&cs_seq);
+			rc = _hl_cs_ioctl(hpriv, chunks_restore,
+						num_chunks_restore, &cs_seq);
 		}
 
 		mutex_unlock(&hpriv->restore_phase_mutex);
@@ -726,7 +736,7 @@ int hl_cs_ioctl(struct hl_fpriv *hpriv, void *data)
 		}
 
 		/* Need to wait for restore completion before execution phase */
-		if (num_chunks > 0) {
+		if (num_chunks_restore) {
 			ret = _hl_cs_wait_ioctl(hdev, ctx,
 					jiffies_to_usecs(hdev->timeout_jiffies),
 					cs_seq);
@@ -754,18 +764,7 @@ int hl_cs_ioctl(struct hl_fpriv *hpriv, void *data)
 		}
 	}
 
-	chunks = (void __user *)(uintptr_t)args->in.chunks_execute;
-	num_chunks = args->in.num_chunks_execute;
-
-	if (num_chunks == 0) {
-		dev_err(hdev->dev,
-			"Got execute CS with 0 chunks, context %d\n",
-			ctx->asid);
-		rc = -EINVAL;
-		goto out;
-	}
-
-	rc = _hl_cs_ioctl(hpriv, chunks, num_chunks, &cs_seq);
+	rc = _hl_cs_ioctl(hpriv, chunks_execute, num_chunks_execute, &cs_seq);
 
 out:
 	if (rc != -EAGAIN) {
diff --git a/drivers/misc/habanalabs/debugfs.c b/drivers/misc/habanalabs/debugfs.c
index 20413e35..756d36e 100644
--- a/drivers/misc/habanalabs/debugfs.c
+++ b/drivers/misc/habanalabs/debugfs.c
@@ -393,9 +393,10 @@ static int mmu_show(struct seq_file *s, void *data)
 	}
 
 	is_dram_addr = hl_mem_area_inside_range(virt_addr, prop->dmmu.page_size,
-				prop->va_space_dram_start_address,
-				prop->va_space_dram_end_address);
+						prop->dmmu.start_addr,
+						prop->dmmu.end_addr);
 
+	/* shifts and masks are the same in PMMU and HPMMU, use one of them */
 	mmu_prop = is_dram_addr ? &prop->dmmu : &prop->pmmu;
 
 	mutex_lock(&ctx->mmu_lock);
@@ -547,12 +548,15 @@ static bool hl_is_device_va(struct hl_device *hdev, u64 addr)
 		goto out;
 
 	if (hdev->dram_supports_virtual_memory &&
-			addr >= prop->va_space_dram_start_address &&
-			addr < prop->va_space_dram_end_address)
+		(addr >= prop->dmmu.start_addr && addr < prop->dmmu.end_addr))
 		return true;
 
-	if (addr >= prop->va_space_host_start_address &&
-			addr < prop->va_space_host_end_address)
+	if (addr >= prop->pmmu.start_addr &&
+		addr < prop->pmmu.end_addr)
+		return true;
+
+	if (addr >= prop->pmmu_huge.start_addr &&
+		addr < prop->pmmu_huge.end_addr)
 		return true;
 out:
 	return false;
@@ -575,9 +579,10 @@ static int device_va_to_pa(struct hl_device *hdev, u64 virt_addr,
 	}
 
 	is_dram_addr = hl_mem_area_inside_range(virt_addr, prop->dmmu.page_size,
-				prop->va_space_dram_start_address,
-				prop->va_space_dram_end_address);
+						prop->dmmu.start_addr,
+						prop->dmmu.end_addr);
 
+	/* shifts and masks are the same in PMMU and HPMMU, use one of them */
 	mmu_prop = is_dram_addr ? &prop->dmmu : &prop->pmmu;
 
 	mutex_lock(&ctx->mmu_lock);
@@ -705,6 +710,65 @@ static ssize_t hl_data_write32(struct file *f, const char __user *buf,
 	return count;
 }
 
+static ssize_t hl_data_read64(struct file *f, char __user *buf,
+					size_t count, loff_t *ppos)
+{
+	struct hl_dbg_device_entry *entry = file_inode(f)->i_private;
+	struct hl_device *hdev = entry->hdev;
+	char tmp_buf[32];
+	u64 addr = entry->addr;
+	u64 val;
+	ssize_t rc;
+
+	if (*ppos)
+		return 0;
+
+	if (hl_is_device_va(hdev, addr)) {
+		rc = device_va_to_pa(hdev, addr, &addr);
+		if (rc)
+			return rc;
+	}
+
+	rc = hdev->asic_funcs->debugfs_read64(hdev, addr, &val);
+	if (rc) {
+		dev_err(hdev->dev, "Failed to read from 0x%010llx\n", addr);
+		return rc;
+	}
+
+	sprintf(tmp_buf, "0x%016llx\n", val);
+	return simple_read_from_buffer(buf, count, ppos, tmp_buf,
+			strlen(tmp_buf));
+}
+
+static ssize_t hl_data_write64(struct file *f, const char __user *buf,
+					size_t count, loff_t *ppos)
+{
+	struct hl_dbg_device_entry *entry = file_inode(f)->i_private;
+	struct hl_device *hdev = entry->hdev;
+	u64 addr = entry->addr;
+	u64 value;
+	ssize_t rc;
+
+	rc = kstrtoull_from_user(buf, count, 16, &value);
+	if (rc)
+		return rc;
+
+	if (hl_is_device_va(hdev, addr)) {
+		rc = device_va_to_pa(hdev, addr, &addr);
+		if (rc)
+			return rc;
+	}
+
+	rc = hdev->asic_funcs->debugfs_write64(hdev, addr, value);
+	if (rc) {
+		dev_err(hdev->dev, "Failed to write 0x%016llx to 0x%010llx\n",
+			value, addr);
+		return rc;
+	}
+
+	return count;
+}
+
 static ssize_t hl_get_power_state(struct file *f, char __user *buf,
 		size_t count, loff_t *ppos)
 {
@@ -912,6 +976,12 @@ static const struct file_operations hl_data32b_fops = {
 	.write = hl_data_write32
 };
 
+static const struct file_operations hl_data64b_fops = {
+	.owner = THIS_MODULE,
+	.read = hl_data_read64,
+	.write = hl_data_write64
+};
+
 static const struct file_operations hl_i2c_data_fops = {
 	.owner = THIS_MODULE,
 	.read = hl_i2c_data_read,
@@ -1025,6 +1095,12 @@ void hl_debugfs_add_device(struct hl_device *hdev)
 				dev_entry,
 				&hl_data32b_fops);
 
+	debugfs_create_file("data64",
+				0644,
+				dev_entry->root,
+				dev_entry,
+				&hl_data64b_fops);
+
 	debugfs_create_file("set_power_state",
 				0200,
 				dev_entry->root,
diff --git a/drivers/misc/habanalabs/device.c b/drivers/misc/habanalabs/device.c
index b680b0c..aef4de3 100644
--- a/drivers/misc/habanalabs/device.c
+++ b/drivers/misc/habanalabs/device.c
@@ -36,7 +36,7 @@ enum hl_device_status hl_device_status(struct hl_device *hdev)
 		status = HL_DEVICE_STATUS_OPERATIONAL;
 
 	return status;
-};
+}
 
 static void hpriv_release(struct kref *ref)
 {
diff --git a/drivers/misc/habanalabs/goya/goya.c b/drivers/misc/habanalabs/goya/goya.c
index b8a8de2..68f0656 100644
--- a/drivers/misc/habanalabs/goya/goya.c
+++ b/drivers/misc/habanalabs/goya/goya.c
@@ -324,7 +324,11 @@ static u32 goya_all_events[] = {
 	GOYA_ASYNC_EVENT_ID_DMA_BM_CH1,
 	GOYA_ASYNC_EVENT_ID_DMA_BM_CH2,
 	GOYA_ASYNC_EVENT_ID_DMA_BM_CH3,
-	GOYA_ASYNC_EVENT_ID_DMA_BM_CH4
+	GOYA_ASYNC_EVENT_ID_DMA_BM_CH4,
+	GOYA_ASYNC_EVENT_ID_FIX_POWER_ENV_S,
+	GOYA_ASYNC_EVENT_ID_FIX_POWER_ENV_E,
+	GOYA_ASYNC_EVENT_ID_FIX_THERMAL_ENV_S,
+	GOYA_ASYNC_EVENT_ID_FIX_THERMAL_ENV_E
 };
 
 static int goya_mmu_clear_pgt_range(struct hl_device *hdev);
@@ -393,19 +397,21 @@ void goya_get_fixed_properties(struct hl_device *hdev)
 	prop->dmmu.hop2_mask = HOP2_MASK;
 	prop->dmmu.hop3_mask = HOP3_MASK;
 	prop->dmmu.hop4_mask = HOP4_MASK;
-	prop->dmmu.huge_page_size = PAGE_SIZE_2MB;
-
-	/* No difference between PMMU and DMMU except of page size */
-	memcpy(&prop->pmmu, &prop->dmmu, sizeof(prop->dmmu));
+	prop->dmmu.start_addr = VA_DDR_SPACE_START;
+	prop->dmmu.end_addr = VA_DDR_SPACE_END;
 	prop->dmmu.page_size = PAGE_SIZE_2MB;
+
+	/* shifts and masks are the same in PMMU and DMMU */
+	memcpy(&prop->pmmu, &prop->dmmu, sizeof(prop->dmmu));
+	prop->pmmu.start_addr = VA_HOST_SPACE_START;
+	prop->pmmu.end_addr = VA_HOST_SPACE_END;
 	prop->pmmu.page_size = PAGE_SIZE_4KB;
 
-	prop->va_space_host_start_address = VA_HOST_SPACE_START;
-	prop->va_space_host_end_address = VA_HOST_SPACE_END;
-	prop->va_space_dram_start_address = VA_DDR_SPACE_START;
-	prop->va_space_dram_end_address = VA_DDR_SPACE_END;
-	prop->dram_size_for_default_page_mapping =
-			prop->va_space_dram_end_address;
+	/* PMMU and HPMMU are the same except of page size */
+	memcpy(&prop->pmmu_huge, &prop->pmmu, sizeof(prop->pmmu));
+	prop->pmmu_huge.page_size = PAGE_SIZE_2MB;
+
+	prop->dram_size_for_default_page_mapping = VA_DDR_SPACE_END;
 	prop->cfg_size = CFG_SIZE;
 	prop->max_asid = MAX_ASID;
 	prop->num_of_events = GOYA_ASYNC_EVENT_ID_SIZE;
@@ -2573,8 +2579,7 @@ static int goya_hw_init(struct hl_device *hdev)
 	 * After CPU initialization is finished, change DDR bar mapping inside
 	 * iATU to point to the start address of the MMU page tables
 	 */
-	if (goya_set_ddr_bar_base(hdev, DRAM_PHYS_BASE +
-			(MMU_PAGE_TABLES_ADDR &
+	if (goya_set_ddr_bar_base(hdev, (MMU_PAGE_TABLES_ADDR &
 			~(prop->dram_pci_bar_size - 0x1ull))) == U64_MAX) {
 		dev_err(hdev->dev,
 			"failed to map DDR bar to MMU page tables\n");
@@ -3443,12 +3448,13 @@ static int goya_validate_dma_pkt_mmu(struct hl_device *hdev,
 	/*
 	 * WA for HW-23.
 	 * We can't allow user to read from Host using QMANs other than 1.
+	 * PMMU and HPMMU addresses are equal, check only one of them.
 	 */
 	if (parser->hw_queue_id != GOYA_QUEUE_ID_DMA_1 &&
 		hl_mem_area_inside_range(le64_to_cpu(user_dma_pkt->src_addr),
 				le32_to_cpu(user_dma_pkt->tsize),
-				hdev->asic_prop.va_space_host_start_address,
-				hdev->asic_prop.va_space_host_end_address)) {
+				hdev->asic_prop.pmmu.start_addr,
+				hdev->asic_prop.pmmu.end_addr)) {
 		dev_err(hdev->dev,
 			"Can't DMA from host on queue other then 1\n");
 		return -EFAULT;
@@ -4178,6 +4184,96 @@ static int goya_debugfs_write32(struct hl_device *hdev, u64 addr, u32 val)
 	return rc;
 }
 
+static int goya_debugfs_read64(struct hl_device *hdev, u64 addr, u64 *val)
+{
+	struct asic_fixed_properties *prop = &hdev->asic_prop;
+	u64 ddr_bar_addr;
+	int rc = 0;
+
+	if ((addr >= CFG_BASE) && (addr <= CFG_BASE + CFG_SIZE - sizeof(u64))) {
+		u32 val_l = RREG32(addr - CFG_BASE);
+		u32 val_h = RREG32(addr + sizeof(u32) - CFG_BASE);
+
+		*val = (((u64) val_h) << 32) | val_l;
+
+	} else if ((addr >= SRAM_BASE_ADDR) &&
+			(addr <= SRAM_BASE_ADDR + SRAM_SIZE - sizeof(u64))) {
+
+		*val = readq(hdev->pcie_bar[SRAM_CFG_BAR_ID] +
+				(addr - SRAM_BASE_ADDR));
+
+	} else if ((addr >= DRAM_PHYS_BASE) &&
+		   (addr <=
+		    DRAM_PHYS_BASE + hdev->asic_prop.dram_size - sizeof(u64))) {
+
+		u64 bar_base_addr = DRAM_PHYS_BASE +
+				(addr & ~(prop->dram_pci_bar_size - 0x1ull));
+
+		ddr_bar_addr = goya_set_ddr_bar_base(hdev, bar_base_addr);
+		if (ddr_bar_addr != U64_MAX) {
+			*val = readq(hdev->pcie_bar[DDR_BAR_ID] +
+						(addr - bar_base_addr));
+
+			ddr_bar_addr = goya_set_ddr_bar_base(hdev,
+							ddr_bar_addr);
+		}
+		if (ddr_bar_addr == U64_MAX)
+			rc = -EIO;
+
+	} else if (addr >= HOST_PHYS_BASE && !iommu_present(&pci_bus_type)) {
+		*val = *(u64 *) phys_to_virt(addr - HOST_PHYS_BASE);
+
+	} else {
+		rc = -EFAULT;
+	}
+
+	return rc;
+}
+
+static int goya_debugfs_write64(struct hl_device *hdev, u64 addr, u64 val)
+{
+	struct asic_fixed_properties *prop = &hdev->asic_prop;
+	u64 ddr_bar_addr;
+	int rc = 0;
+
+	if ((addr >= CFG_BASE) && (addr <= CFG_BASE + CFG_SIZE - sizeof(u64))) {
+		WREG32(addr - CFG_BASE, lower_32_bits(val));
+		WREG32(addr + sizeof(u32) - CFG_BASE, upper_32_bits(val));
+
+	} else if ((addr >= SRAM_BASE_ADDR) &&
+			(addr <= SRAM_BASE_ADDR + SRAM_SIZE - sizeof(u64))) {
+
+		writeq(val, hdev->pcie_bar[SRAM_CFG_BAR_ID] +
+					(addr - SRAM_BASE_ADDR));
+
+	} else if ((addr >= DRAM_PHYS_BASE) &&
+		   (addr <=
+		    DRAM_PHYS_BASE + hdev->asic_prop.dram_size - sizeof(u64))) {
+
+		u64 bar_base_addr = DRAM_PHYS_BASE +
+				(addr & ~(prop->dram_pci_bar_size - 0x1ull));
+
+		ddr_bar_addr = goya_set_ddr_bar_base(hdev, bar_base_addr);
+		if (ddr_bar_addr != U64_MAX) {
+			writeq(val, hdev->pcie_bar[DDR_BAR_ID] +
+						(addr - bar_base_addr));
+
+			ddr_bar_addr = goya_set_ddr_bar_base(hdev,
+							ddr_bar_addr);
+		}
+		if (ddr_bar_addr == U64_MAX)
+			rc = -EIO;
+
+	} else if (addr >= HOST_PHYS_BASE && !iommu_present(&pci_bus_type)) {
+		*(u64 *) phys_to_virt(addr - HOST_PHYS_BASE) = val;
+
+	} else {
+		rc = -EFAULT;
+	}
+
+	return rc;
+}
+
 static u64 goya_read_pte(struct hl_device *hdev, u64 addr)
 {
 	struct goya_device *goya = hdev->asic_specific;
@@ -4297,6 +4393,14 @@ static const char *_goya_get_event_desc(u16 event_type)
 		return "TPC%d_bmon_spmu";
 	case GOYA_ASYNC_EVENT_ID_DMA_BM_CH0 ... GOYA_ASYNC_EVENT_ID_DMA_BM_CH4:
 		return "DMA_bm_ch%d";
+	case GOYA_ASYNC_EVENT_ID_FIX_POWER_ENV_S:
+		return "POWER_ENV_S";
+	case GOYA_ASYNC_EVENT_ID_FIX_POWER_ENV_E:
+		return "POWER_ENV_E";
+	case GOYA_ASYNC_EVENT_ID_FIX_THERMAL_ENV_S:
+		return "THERMAL_ENV_S";
+	case GOYA_ASYNC_EVENT_ID_FIX_THERMAL_ENV_E:
+		return "THERMAL_ENV_E";
 	default:
 		return "N/A";
 	}
@@ -4388,22 +4492,22 @@ static void goya_get_event_desc(u16 event_type, char *desc, size_t size)
 static void goya_print_razwi_info(struct hl_device *hdev)
 {
 	if (RREG32(mmDMA_MACRO_RAZWI_LBW_WT_VLD)) {
-		dev_err(hdev->dev, "Illegal write to LBW\n");
+		dev_err_ratelimited(hdev->dev, "Illegal write to LBW\n");
 		WREG32(mmDMA_MACRO_RAZWI_LBW_WT_VLD, 0);
 	}
 
 	if (RREG32(mmDMA_MACRO_RAZWI_LBW_RD_VLD)) {
-		dev_err(hdev->dev, "Illegal read from LBW\n");
+		dev_err_ratelimited(hdev->dev, "Illegal read from LBW\n");
 		WREG32(mmDMA_MACRO_RAZWI_LBW_RD_VLD, 0);
 	}
 
 	if (RREG32(mmDMA_MACRO_RAZWI_HBW_WT_VLD)) {
-		dev_err(hdev->dev, "Illegal write to HBW\n");
+		dev_err_ratelimited(hdev->dev, "Illegal write to HBW\n");
 		WREG32(mmDMA_MACRO_RAZWI_HBW_WT_VLD, 0);
 	}
 
 	if (RREG32(mmDMA_MACRO_RAZWI_HBW_RD_VLD)) {
-		dev_err(hdev->dev, "Illegal read from HBW\n");
+		dev_err_ratelimited(hdev->dev, "Illegal read from HBW\n");
 		WREG32(mmDMA_MACRO_RAZWI_HBW_RD_VLD, 0);
 	}
 }
@@ -4423,7 +4527,8 @@ static void goya_print_mmu_error_info(struct hl_device *hdev)
 		addr <<= 32;
 		addr |= RREG32(mmMMU_PAGE_ERROR_CAPTURE_VA);
 
-		dev_err(hdev->dev, "MMU page fault on va 0x%llx\n", addr);
+		dev_err_ratelimited(hdev->dev, "MMU page fault on va 0x%llx\n",
+					addr);
 
 		WREG32(mmMMU_PAGE_ERROR_CAPTURE, 0);
 	}
@@ -4435,7 +4540,7 @@ static void goya_print_irq_info(struct hl_device *hdev, u16 event_type,
 	char desc[20] = "";
 
 	goya_get_event_desc(event_type, desc, sizeof(desc));
-	dev_err(hdev->dev, "Received H/W interrupt %d [\"%s\"]\n",
+	dev_err_ratelimited(hdev->dev, "Received H/W interrupt %d [\"%s\"]\n",
 		event_type, desc);
 
 	if (razwi) {
@@ -4526,6 +4631,33 @@ static int goya_unmask_irq(struct hl_device *hdev, u16 event_type)
 	return rc;
 }
 
+static void goya_print_clk_change_info(struct hl_device *hdev, u16 event_type)
+{
+	switch (event_type) {
+	case GOYA_ASYNC_EVENT_ID_FIX_POWER_ENV_S:
+		dev_info_ratelimited(hdev->dev,
+			"Clock throttling due to power consumption\n");
+		break;
+	case GOYA_ASYNC_EVENT_ID_FIX_POWER_ENV_E:
+		dev_info_ratelimited(hdev->dev,
+			"Power envelop is safe, back to optimal clock\n");
+		break;
+	case GOYA_ASYNC_EVENT_ID_FIX_THERMAL_ENV_S:
+		dev_info_ratelimited(hdev->dev,
+			"Clock throttling due to overheating\n");
+		break;
+	case GOYA_ASYNC_EVENT_ID_FIX_THERMAL_ENV_E:
+		dev_info_ratelimited(hdev->dev,
+			"Thermal envelop is safe, back to optimal clock\n");
+		break;
+
+	default:
+		dev_err(hdev->dev, "Received invalid clock change event %d\n",
+			event_type);
+		break;
+	}
+}
+
 void goya_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_entry)
 {
 	u32 ctl = le32_to_cpu(eq_entry->hdr.ctl);
@@ -4609,6 +4741,14 @@ void goya_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_entry)
 		goya_unmask_irq(hdev, event_type);
 		break;
 
+	case GOYA_ASYNC_EVENT_ID_FIX_POWER_ENV_S:
+	case GOYA_ASYNC_EVENT_ID_FIX_POWER_ENV_E:
+	case GOYA_ASYNC_EVENT_ID_FIX_THERMAL_ENV_S:
+	case GOYA_ASYNC_EVENT_ID_FIX_THERMAL_ENV_E:
+		goya_print_clk_change_info(hdev, event_type);
+		goya_unmask_irq(hdev, event_type);
+		break;
+
 	default:
 		dev_err(hdev->dev, "Received invalid H/W interrupt %d\n",
 				event_type);
@@ -4776,7 +4916,8 @@ static int goya_mmu_add_mappings_for_device_cpu(struct hl_device *hdev)
 
 	for (off = 0 ; off < CPU_FW_IMAGE_SIZE ; off += PAGE_SIZE_2MB) {
 		rc = hl_mmu_map(hdev->kernel_ctx, prop->dram_base_address + off,
-				prop->dram_base_address + off, PAGE_SIZE_2MB);
+				prop->dram_base_address + off, PAGE_SIZE_2MB,
+				(off + PAGE_SIZE_2MB) == CPU_FW_IMAGE_SIZE);
 		if (rc) {
 			dev_err(hdev->dev, "Map failed for address 0x%llx\n",
 				prop->dram_base_address + off);
@@ -4786,7 +4927,7 @@ static int goya_mmu_add_mappings_for_device_cpu(struct hl_device *hdev)
 
 	if (!(hdev->cpu_accessible_dma_address & (PAGE_SIZE_2MB - 1))) {
 		rc = hl_mmu_map(hdev->kernel_ctx, VA_CPU_ACCESSIBLE_MEM_ADDR,
-			hdev->cpu_accessible_dma_address, PAGE_SIZE_2MB);
+			hdev->cpu_accessible_dma_address, PAGE_SIZE_2MB, true);
 
 		if (rc) {
 			dev_err(hdev->dev,
@@ -4799,7 +4940,7 @@ static int goya_mmu_add_mappings_for_device_cpu(struct hl_device *hdev)
 			rc = hl_mmu_map(hdev->kernel_ctx,
 				VA_CPU_ACCESSIBLE_MEM_ADDR + cpu_off,
 				hdev->cpu_accessible_dma_address + cpu_off,
-				PAGE_SIZE_4KB);
+				PAGE_SIZE_4KB, true);
 			if (rc) {
 				dev_err(hdev->dev,
 					"Map failed for CPU accessible memory\n");
@@ -4825,14 +4966,15 @@ static int goya_mmu_add_mappings_for_device_cpu(struct hl_device *hdev)
 	for (; cpu_off >= 0 ; cpu_off -= PAGE_SIZE_4KB)
 		if (hl_mmu_unmap(hdev->kernel_ctx,
 				VA_CPU_ACCESSIBLE_MEM_ADDR + cpu_off,
-				PAGE_SIZE_4KB))
+				PAGE_SIZE_4KB, true))
 			dev_warn_ratelimited(hdev->dev,
 				"failed to unmap address 0x%llx\n",
 				VA_CPU_ACCESSIBLE_MEM_ADDR + cpu_off);
 unmap:
 	for (; off >= 0 ; off -= PAGE_SIZE_2MB)
 		if (hl_mmu_unmap(hdev->kernel_ctx,
-				prop->dram_base_address + off, PAGE_SIZE_2MB))
+				prop->dram_base_address + off, PAGE_SIZE_2MB,
+				true))
 			dev_warn_ratelimited(hdev->dev,
 				"failed to unmap address 0x%llx\n",
 				prop->dram_base_address + off);
@@ -4857,14 +4999,15 @@ void goya_mmu_remove_device_cpu_mappings(struct hl_device *hdev)
 
 	if (!(hdev->cpu_accessible_dma_address & (PAGE_SIZE_2MB - 1))) {
 		if (hl_mmu_unmap(hdev->kernel_ctx, VA_CPU_ACCESSIBLE_MEM_ADDR,
-				PAGE_SIZE_2MB))
+				PAGE_SIZE_2MB, true))
 			dev_warn(hdev->dev,
 				"Failed to unmap CPU accessible memory\n");
 	} else {
 		for (cpu_off = 0 ; cpu_off < SZ_2M ; cpu_off += PAGE_SIZE_4KB)
 			if (hl_mmu_unmap(hdev->kernel_ctx,
 					VA_CPU_ACCESSIBLE_MEM_ADDR + cpu_off,
-					PAGE_SIZE_4KB))
+					PAGE_SIZE_4KB,
+					(cpu_off + PAGE_SIZE_4KB) >= SZ_2M))
 				dev_warn_ratelimited(hdev->dev,
 					"failed to unmap address 0x%llx\n",
 					VA_CPU_ACCESSIBLE_MEM_ADDR + cpu_off);
@@ -4872,7 +5015,8 @@ void goya_mmu_remove_device_cpu_mappings(struct hl_device *hdev)
 
 	for (off = 0 ; off < CPU_FW_IMAGE_SIZE ; off += PAGE_SIZE_2MB)
 		if (hl_mmu_unmap(hdev->kernel_ctx,
-				prop->dram_base_address + off, PAGE_SIZE_2MB))
+				prop->dram_base_address + off, PAGE_SIZE_2MB,
+				(off + PAGE_SIZE_2MB) >= CPU_FW_IMAGE_SIZE))
 			dev_warn_ratelimited(hdev->dev,
 					"Failed to unmap address 0x%llx\n",
 					prop->dram_base_address + off);
@@ -5113,6 +5257,7 @@ static bool goya_is_device_idle(struct hl_device *hdev, u32 *mask,
 }
 
 static void goya_hw_queues_lock(struct hl_device *hdev)
+	__acquires(&goya->hw_queues_lock)
 {
 	struct goya_device *goya = hdev->asic_specific;
 
@@ -5120,6 +5265,7 @@ static void goya_hw_queues_lock(struct hl_device *hdev)
 }
 
 static void goya_hw_queues_unlock(struct hl_device *hdev)
+	__releases(&goya->hw_queues_lock)
 {
 	struct goya_device *goya = hdev->asic_specific;
 
@@ -5180,6 +5326,8 @@ static const struct hl_asic_funcs goya_funcs = {
 	.restore_phase_topology = goya_restore_phase_topology,
 	.debugfs_read32 = goya_debugfs_read32,
 	.debugfs_write32 = goya_debugfs_write32,
+	.debugfs_read64 = goya_debugfs_read64,
+	.debugfs_write64 = goya_debugfs_write64,
 	.add_device_attr = goya_add_device_attr,
 	.handle_eqe = goya_handle_eqe,
 	.set_pll_profile = goya_set_pll_profile,
diff --git a/drivers/misc/habanalabs/goya/goya_coresight.c b/drivers/misc/habanalabs/goya/goya_coresight.c
index c1ee6e2..a1bc930 100644
--- a/drivers/misc/habanalabs/goya/goya_coresight.c
+++ b/drivers/misc/habanalabs/goya/goya_coresight.c
@@ -364,8 +364,8 @@ static int goya_etr_validate_address(struct hl_device *hdev, u64 addr,
 	u64 range_start, range_end;
 
 	if (hdev->mmu_enable) {
-		range_start = prop->va_space_dram_start_address;
-		range_end = prop->va_space_dram_end_address;
+		range_start = prop->dmmu.start_addr;
+		range_end = prop->dmmu.end_addr;
 	} else {
 		range_start = prop->dram_user_base_address;
 		range_end = prop->dram_end_address;
diff --git a/drivers/misc/habanalabs/goya/goya_hwmgr.c b/drivers/misc/habanalabs/goya/goya_hwmgr.c
index b2ebc01..cdd4903 100644
--- a/drivers/misc/habanalabs/goya/goya_hwmgr.c
+++ b/drivers/misc/habanalabs/goya/goya_hwmgr.c
@@ -298,8 +298,8 @@ static ssize_t pm_mng_profile_store(struct device *dev,
 		/* Make sure we are in LOW PLL when changing modes */
 		if (hdev->pm_mng_profile == PM_MANUAL) {
 			hdev->curr_pll_profile = PLL_HIGH;
-			hl_device_set_frequency(hdev, PLL_LOW);
 			hdev->pm_mng_profile = PM_AUTO;
+			hl_device_set_frequency(hdev, PLL_LOW);
 		}
 	} else if (strncmp("manual", buf, strlen("manual")) == 0) {
 		if (hdev->pm_mng_profile == PM_AUTO) {
diff --git a/drivers/misc/habanalabs/habanalabs.h b/drivers/misc/habanalabs/habanalabs.h
index 00c949f..31ebcf9 100644
--- a/drivers/misc/habanalabs/habanalabs.h
+++ b/drivers/misc/habanalabs/habanalabs.h
@@ -132,6 +132,8 @@ enum hl_device_hw_state {
 
 /**
  * struct hl_mmu_properties - ASIC specific MMU address translation properties.
+ * @start_addr: virtual start address of the memory region.
+ * @end_addr: virtual end address of the memory region.
  * @hop0_shift: shift of hop 0 mask.
  * @hop1_shift: shift of hop 1 mask.
  * @hop2_shift: shift of hop 2 mask.
@@ -143,9 +145,10 @@ enum hl_device_hw_state {
  * @hop3_mask: mask to get the PTE address in hop 3.
  * @hop4_mask: mask to get the PTE address in hop 4.
  * @page_size: default page size used to allocate memory.
- * @huge_page_size: page size used to allocate memory with huge pages.
  */
 struct hl_mmu_properties {
+	u64	start_addr;
+	u64	end_addr;
 	u64	hop0_shift;
 	u64	hop1_shift;
 	u64	hop2_shift;
@@ -157,7 +160,6 @@ struct hl_mmu_properties {
 	u64	hop3_mask;
 	u64	hop4_mask;
 	u32	page_size;
-	u32	huge_page_size;
 };
 
 /**
@@ -169,6 +171,8 @@ struct hl_mmu_properties {
  * @preboot_ver: F/W Preboot version.
  * @dmmu: DRAM MMU address translation properties.
  * @pmmu: PCI (host) MMU address translation properties.
+ * @pmmu_huge: PCI (host) MMU address translation properties for memory
+ *              allocated with huge pages.
  * @sram_base_address: SRAM physical start address.
  * @sram_end_address: SRAM physical end address.
  * @sram_user_base_address - SRAM physical start address for user access.
@@ -178,14 +182,6 @@ struct hl_mmu_properties {
  * @dram_size: DRAM total size.
  * @dram_pci_bar_size: size of PCI bar towards DRAM.
  * @max_power_default: max power of the device after reset
- * @va_space_host_start_address: base address of virtual memory range for
- *                               mapping host memory.
- * @va_space_host_end_address: end address of virtual memory range for
- *                             mapping host memory.
- * @va_space_dram_start_address: base address of virtual memory range for
- *                               mapping DRAM memory.
- * @va_space_dram_end_address: end address of virtual memory range for
- *                             mapping DRAM memory.
  * @dram_size_for_default_page_mapping: DRAM size needed to map to avoid page
  *                                      fault.
  * @pcie_dbi_base_address: Base address of the PCIE_DBI block.
@@ -218,6 +214,7 @@ struct asic_fixed_properties {
 	char				preboot_ver[VERSION_MAX_LEN];
 	struct hl_mmu_properties	dmmu;
 	struct hl_mmu_properties	pmmu;
+	struct hl_mmu_properties	pmmu_huge;
 	u64				sram_base_address;
 	u64				sram_end_address;
 	u64				sram_user_base_address;
@@ -227,10 +224,6 @@ struct asic_fixed_properties {
 	u64				dram_size;
 	u64				dram_pci_bar_size;
 	u64				max_power_default;
-	u64				va_space_host_start_address;
-	u64				va_space_host_end_address;
-	u64				va_space_dram_start_address;
-	u64				va_space_dram_end_address;
 	u64				dram_size_for_default_page_mapping;
 	u64				pcie_dbi_base_address;
 	u64				pcie_aux_dbi_reg_addr;
@@ -431,10 +424,12 @@ struct hl_eq {
  * enum hl_asic_type - supported ASIC types.
  * @ASIC_INVALID: Invalid ASIC type.
  * @ASIC_GOYA: Goya device.
+ * @ASIC_GAUDI: Gaudi device.
  */
 enum hl_asic_type {
 	ASIC_INVALID,
-	ASIC_GOYA
+	ASIC_GOYA,
+	ASIC_GAUDI
 };
 
 struct hl_cs_parser;
@@ -589,6 +584,8 @@ struct hl_asic_funcs {
 	void (*restore_phase_topology)(struct hl_device *hdev);
 	int (*debugfs_read32)(struct hl_device *hdev, u64 addr, u32 *val);
 	int (*debugfs_write32)(struct hl_device *hdev, u64 addr, u32 val);
+	int (*debugfs_read64)(struct hl_device *hdev, u64 addr, u64 *val);
+	int (*debugfs_write64)(struct hl_device *hdev, u64 addr, u64 val);
 	void (*add_device_attr)(struct hl_device *hdev,
 				struct attribute_group *dev_attr_grp);
 	void (*handle_eqe)(struct hl_device *hdev,
@@ -658,6 +655,8 @@ struct hl_va_range {
  *		this hits 0l. It is incremented on CS and CS_WAIT.
  * @cs_pending: array of DMA fence objects representing pending CS.
  * @host_va_range: holds available virtual addresses for host mappings.
+ * @host_huge_va_range: holds available virtual addresses for host mappings
+ *                      with huge pages.
  * @dram_va_range: holds available virtual addresses for DRAM mappings.
  * @mem_hash_lock: protects the mem_hash.
  * @mmu_lock: protects the MMU page tables. Any change to the PGT, modifing the
@@ -688,8 +687,9 @@ struct hl_ctx {
 	struct hl_device	*hdev;
 	struct kref		refcount;
 	struct dma_fence	*cs_pending[HL_MAX_PENDING_CS];
-	struct hl_va_range	host_va_range;
-	struct hl_va_range	dram_va_range;
+	struct hl_va_range	*host_va_range;
+	struct hl_va_range	*host_huge_va_range;
+	struct hl_va_range	*dram_va_range;
 	struct mutex		mem_hash_lock;
 	struct mutex		mmu_lock;
 	struct list_head	debugfs_list;
@@ -763,7 +763,7 @@ struct hl_userptr {
  * @aborted: true if CS was aborted due to some device error.
  */
 struct hl_cs {
-	u8			jobs_in_queue_cnt[HL_MAX_QUEUES];
+	u16			jobs_in_queue_cnt[HL_MAX_QUEUES];
 	struct hl_ctx		*ctx;
 	struct list_head	job_list;
 	spinlock_t		job_lock;
@@ -1291,6 +1291,8 @@ struct hl_device_idle_busy_ts {
  *                   otherwise.
  * @dram_supports_virtual_memory: is MMU enabled towards DRAM.
  * @dram_default_page_mapping: is DRAM default page mapping enabled.
+ * @pmmu_huge_range: is a different virtual addresses range used for PMMU with
+ *                   huge pages.
  * @init_done: is the initialization of the device done.
  * @mmu_enable: is MMU enabled.
  * @device_cpu_disabled: is the device CPU disabled (due to timeouts)
@@ -1372,6 +1374,7 @@ struct hl_device {
 	u8				reset_on_lockup;
 	u8				dram_supports_virtual_memory;
 	u8				dram_default_page_mapping;
+	u8				pmmu_huge_range;
 	u8				init_done;
 	u8				device_cpu_disabled;
 	u8				dma_mask;
@@ -1573,8 +1576,10 @@ int hl_mmu_init(struct hl_device *hdev);
 void hl_mmu_fini(struct hl_device *hdev);
 int hl_mmu_ctx_init(struct hl_ctx *ctx);
 void hl_mmu_ctx_fini(struct hl_ctx *ctx);
-int hl_mmu_map(struct hl_ctx *ctx, u64 virt_addr, u64 phys_addr, u32 page_size);
-int hl_mmu_unmap(struct hl_ctx *ctx, u64 virt_addr, u32 page_size);
+int hl_mmu_map(struct hl_ctx *ctx, u64 virt_addr, u64 phys_addr,
+		u32 page_size, bool flush_pte);
+int hl_mmu_unmap(struct hl_ctx *ctx, u64 virt_addr, u32 page_size,
+		bool flush_pte);
 void hl_mmu_swap_out(struct hl_ctx *ctx);
 void hl_mmu_swap_in(struct hl_ctx *ctx);
 
@@ -1606,11 +1611,18 @@ int hl_pci_set_dma_mask(struct hl_device *hdev, u8 dma_mask);
 
 long hl_get_frequency(struct hl_device *hdev, u32 pll_index, bool curr);
 void hl_set_frequency(struct hl_device *hdev, u32 pll_index, u64 freq);
-long hl_get_temperature(struct hl_device *hdev, int sensor_index, u32 attr);
-long hl_get_voltage(struct hl_device *hdev, int sensor_index, u32 attr);
-long hl_get_current(struct hl_device *hdev, int sensor_index, u32 attr);
-long hl_get_fan_speed(struct hl_device *hdev, int sensor_index, u32 attr);
-long hl_get_pwm_info(struct hl_device *hdev, int sensor_index, u32 attr);
+int hl_get_temperature(struct hl_device *hdev,
+		       int sensor_index, u32 attr, long *value);
+int hl_set_temperature(struct hl_device *hdev,
+		       int sensor_index, u32 attr, long value);
+int hl_get_voltage(struct hl_device *hdev,
+		   int sensor_index, u32 attr, long *value);
+int hl_get_current(struct hl_device *hdev,
+		   int sensor_index, u32 attr, long *value);
+int hl_get_fan_speed(struct hl_device *hdev,
+		     int sensor_index, u32 attr, long *value);
+int hl_get_pwm_info(struct hl_device *hdev,
+		    int sensor_index, u32 attr, long *value);
 void hl_set_pwm_info(struct hl_device *hdev, int sensor_index, u32 attr,
 			long value);
 u64 hl_get_max_power(struct hl_device *hdev);
diff --git a/drivers/misc/habanalabs/habanalabs_drv.c b/drivers/misc/habanalabs/habanalabs_drv.c
index 8c342fb..b670859 100644
--- a/drivers/misc/habanalabs/habanalabs_drv.c
+++ b/drivers/misc/habanalabs/habanalabs_drv.c
@@ -40,12 +40,13 @@ MODULE_PARM_DESC(reset_on_lockup,
 #define PCI_VENDOR_ID_HABANALABS	0x1da3
 
 #define PCI_IDS_GOYA			0x0001
+#define PCI_IDS_GAUDI			0x1000
 
 static const struct pci_device_id ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_HABANALABS, PCI_IDS_GOYA), },
+	{ PCI_DEVICE(PCI_VENDOR_ID_HABANALABS, PCI_IDS_GAUDI), },
 	{ 0, }
 };
-MODULE_DEVICE_TABLE(pci, ids);
 
 /*
  * get_asic_type - translate device id to asic type
@@ -63,6 +64,9 @@ static enum hl_asic_type get_asic_type(u16 device)
 	case PCI_IDS_GOYA:
 		asic_type = ASIC_GOYA;
 		break;
+	case PCI_IDS_GAUDI:
+		asic_type = ASIC_GAUDI;
+		break;
 	default:
 		asic_type = ASIC_INVALID;
 		break;
@@ -263,6 +267,11 @@ int create_hdev(struct hl_device **dev, struct pci_dev *pdev,
 			dev_err(&pdev->dev, "Unsupported ASIC\n");
 			rc = -ENODEV;
 			goto free_hdev;
+		} else if (hdev->asic_type == ASIC_GAUDI) {
+			dev_err(&pdev->dev,
+				"GAUDI is not supported by the current kernel\n");
+			rc = -ENODEV;
+			goto free_hdev;
 		}
 	} else {
 		hdev->asic_type = asic_type;
diff --git a/drivers/misc/habanalabs/hwmon.c b/drivers/misc/habanalabs/hwmon.c
index 7be4bac..a21a26e 100644
--- a/drivers/misc/habanalabs/hwmon.c
+++ b/drivers/misc/habanalabs/hwmon.c
@@ -113,6 +113,7 @@ static int hl_read(struct device *dev, enum hwmon_sensor_types type,
 			u32 attr, int channel, long *val)
 {
 	struct hl_device *hdev = dev_get_drvdata(dev);
+	int rc;
 
 	if (hl_device_disabled_or_in_reset(hdev))
 		return -ENODEV;
@@ -125,36 +126,40 @@ static int hl_read(struct device *dev, enum hwmon_sensor_types type,
 		case hwmon_temp_crit:
 		case hwmon_temp_max_hyst:
 		case hwmon_temp_crit_hyst:
+		case hwmon_temp_offset:
+		case hwmon_temp_highest:
 			break;
 		default:
 			return -EINVAL;
 		}
 
-		*val = hl_get_temperature(hdev, channel, attr);
+		rc = hl_get_temperature(hdev, channel, attr, val);
 		break;
 	case hwmon_in:
 		switch (attr) {
 		case hwmon_in_input:
 		case hwmon_in_min:
 		case hwmon_in_max:
+		case hwmon_in_highest:
 			break;
 		default:
 			return -EINVAL;
 		}
 
-		*val = hl_get_voltage(hdev, channel, attr);
+		rc = hl_get_voltage(hdev, channel, attr, val);
 		break;
 	case hwmon_curr:
 		switch (attr) {
 		case hwmon_curr_input:
 		case hwmon_curr_min:
 		case hwmon_curr_max:
+		case hwmon_curr_highest:
 			break;
 		default:
 			return -EINVAL;
 		}
 
-		*val = hl_get_current(hdev, channel, attr);
+		rc = hl_get_current(hdev, channel, attr, val);
 		break;
 	case hwmon_fan:
 		switch (attr) {
@@ -165,7 +170,7 @@ static int hl_read(struct device *dev, enum hwmon_sensor_types type,
 		default:
 			return -EINVAL;
 		}
-		*val = hl_get_fan_speed(hdev, channel, attr);
+		rc = hl_get_fan_speed(hdev, channel, attr, val);
 		break;
 	case hwmon_pwm:
 		switch (attr) {
@@ -175,12 +180,12 @@ static int hl_read(struct device *dev, enum hwmon_sensor_types type,
 		default:
 			return -EINVAL;
 		}
-		*val = hl_get_pwm_info(hdev, channel, attr);
+		rc = hl_get_pwm_info(hdev, channel, attr, val);
 		break;
 	default:
 		return -EINVAL;
 	}
-	return 0;
+	return rc;
 }
 
 static int hl_write(struct device *dev, enum hwmon_sensor_types type,
@@ -192,6 +197,15 @@ static int hl_write(struct device *dev, enum hwmon_sensor_types type,
 		return -ENODEV;
 
 	switch (type) {
+	case hwmon_temp:
+		switch (attr) {
+		case hwmon_temp_offset:
+			break;
+		default:
+			return -EINVAL;
+		}
+		hl_set_temperature(hdev, channel, attr, val);
+		break;
 	case hwmon_pwm:
 		switch (attr) {
 		case hwmon_pwm_input:
@@ -219,7 +233,10 @@ static umode_t hl_is_visible(const void *data, enum hwmon_sensor_types type,
 		case hwmon_temp_max_hyst:
 		case hwmon_temp_crit:
 		case hwmon_temp_crit_hyst:
+		case hwmon_temp_highest:
 			return 0444;
+		case hwmon_temp_offset:
+			return 0644;
 		}
 		break;
 	case hwmon_in:
@@ -227,6 +244,7 @@ static umode_t hl_is_visible(const void *data, enum hwmon_sensor_types type,
 		case hwmon_in_input:
 		case hwmon_in_min:
 		case hwmon_in_max:
+		case hwmon_in_highest:
 			return 0444;
 		}
 		break;
@@ -235,6 +253,7 @@ static umode_t hl_is_visible(const void *data, enum hwmon_sensor_types type,
 		case hwmon_curr_input:
 		case hwmon_curr_min:
 		case hwmon_curr_max:
+		case hwmon_curr_highest:
 			return 0444;
 		}
 		break;
@@ -265,10 +284,10 @@ static const struct hwmon_ops hl_hwmon_ops = {
 	.write = hl_write
 };
 
-long hl_get_temperature(struct hl_device *hdev, int sensor_index, u32 attr)
+int hl_get_temperature(struct hl_device *hdev,
+			int sensor_index, u32 attr, long *value)
 {
 	struct armcp_packet pkt;
-	long result;
 	int rc;
 
 	memset(&pkt, 0, sizeof(pkt));
@@ -279,22 +298,47 @@ long hl_get_temperature(struct hl_device *hdev, int sensor_index, u32 attr)
 	pkt.type = __cpu_to_le16(attr);
 
 	rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &pkt, sizeof(pkt),
-			SENSORS_PKT_TIMEOUT, &result);
+			SENSORS_PKT_TIMEOUT, value);
 
 	if (rc) {
 		dev_err(hdev->dev,
 			"Failed to get temperature from sensor %d, error %d\n",
 			sensor_index, rc);
-		result = 0;
+		*value = 0;
 	}
 
-	return result;
+	return rc;
 }
 
-long hl_get_voltage(struct hl_device *hdev, int sensor_index, u32 attr)
+int hl_set_temperature(struct hl_device *hdev,
+			int sensor_index, u32 attr, long value)
 {
 	struct armcp_packet pkt;
-	long result;
+	int rc;
+
+	memset(&pkt, 0, sizeof(pkt));
+
+	pkt.ctl = cpu_to_le32(ARMCP_PACKET_TEMPERATURE_SET <<
+				ARMCP_PKT_CTL_OPCODE_SHIFT);
+	pkt.sensor_index = __cpu_to_le16(sensor_index);
+	pkt.type = __cpu_to_le16(attr);
+	pkt.value = __cpu_to_le64(value);
+
+	rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &pkt, sizeof(pkt),
+						SENSORS_PKT_TIMEOUT, NULL);
+
+	if (rc)
+		dev_err(hdev->dev,
+			"Failed to set temperature of sensor %d, error %d\n",
+			sensor_index, rc);
+
+	return rc;
+}
+
+int hl_get_voltage(struct hl_device *hdev,
+			int sensor_index, u32 attr, long *value)
+{
+	struct armcp_packet pkt;
 	int rc;
 
 	memset(&pkt, 0, sizeof(pkt));
@@ -305,22 +349,22 @@ long hl_get_voltage(struct hl_device *hdev, int sensor_index, u32 attr)
 	pkt.type = __cpu_to_le16(attr);
 
 	rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &pkt, sizeof(pkt),
-					SENSORS_PKT_TIMEOUT, &result);
+					SENSORS_PKT_TIMEOUT, value);
 
 	if (rc) {
 		dev_err(hdev->dev,
 			"Failed to get voltage from sensor %d, error %d\n",
 			sensor_index, rc);
-		result = 0;
+		*value = 0;
 	}
 
-	return result;
+	return rc;
 }
 
-long hl_get_current(struct hl_device *hdev, int sensor_index, u32 attr)
+int hl_get_current(struct hl_device *hdev,
+			int sensor_index, u32 attr, long *value)
 {
 	struct armcp_packet pkt;
-	long result;
 	int rc;
 
 	memset(&pkt, 0, sizeof(pkt));
@@ -331,22 +375,22 @@ long hl_get_current(struct hl_device *hdev, int sensor_index, u32 attr)
 	pkt.type = __cpu_to_le16(attr);
 
 	rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &pkt, sizeof(pkt),
-					SENSORS_PKT_TIMEOUT, &result);
+					SENSORS_PKT_TIMEOUT, value);
 
 	if (rc) {
 		dev_err(hdev->dev,
 			"Failed to get current from sensor %d, error %d\n",
 			sensor_index, rc);
-		result = 0;
+		*value = 0;
 	}
 
-	return result;
+	return rc;
 }
 
-long hl_get_fan_speed(struct hl_device *hdev, int sensor_index, u32 attr)
+int hl_get_fan_speed(struct hl_device *hdev,
+			int sensor_index, u32 attr, long *value)
 {
 	struct armcp_packet pkt;
-	long result;
 	int rc;
 
 	memset(&pkt, 0, sizeof(pkt));
@@ -357,22 +401,22 @@ long hl_get_fan_speed(struct hl_device *hdev, int sensor_index, u32 attr)
 	pkt.type = __cpu_to_le16(attr);
 
 	rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &pkt, sizeof(pkt),
-					SENSORS_PKT_TIMEOUT, &result);
+					SENSORS_PKT_TIMEOUT, value);
 
 	if (rc) {
 		dev_err(hdev->dev,
 			"Failed to get fan speed from sensor %d, error %d\n",
 			sensor_index, rc);
-		result = 0;
+		*value = 0;
 	}
 
-	return result;
+	return rc;
 }
 
-long hl_get_pwm_info(struct hl_device *hdev, int sensor_index, u32 attr)
+int hl_get_pwm_info(struct hl_device *hdev,
+			int sensor_index, u32 attr, long *value)
 {
 	struct armcp_packet pkt;
-	long result;
 	int rc;
 
 	memset(&pkt, 0, sizeof(pkt));
@@ -383,16 +427,16 @@ long hl_get_pwm_info(struct hl_device *hdev, int sensor_index, u32 attr)
 	pkt.type = __cpu_to_le16(attr);
 
 	rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &pkt, sizeof(pkt),
-					SENSORS_PKT_TIMEOUT, &result);
+					SENSORS_PKT_TIMEOUT, value);
 
 	if (rc) {
 		dev_err(hdev->dev,
 			"Failed to get pwm info from sensor %d, error %d\n",
 			sensor_index, rc);
-		result = 0;
+		*value = 0;
 	}
 
-	return result;
+	return rc;
 }
 
 void hl_set_pwm_info(struct hl_device *hdev, int sensor_index, u32 attr,
diff --git a/drivers/misc/habanalabs/include/armcp_if.h b/drivers/misc/habanalabs/include/armcp_if.h
index e4c6699..bdd0a4c 100644
--- a/drivers/misc/habanalabs/include/armcp_if.h
+++ b/drivers/misc/habanalabs/include/armcp_if.h
@@ -189,6 +189,10 @@ enum pq_init_status {
  *       ArmCP to write to the structure, to prevent data corruption in case of
  *       mismatched driver/FW versions.
  *
+ * ARMCP_PACKET_TEMPERATURE_SET -
+ *       Set the value of the offset property of a specified thermal sensor.
+ *       The packet's arguments specify the desired sensor and the field to
+ *       set.
  */
 
 enum armcp_packet_id {
@@ -214,6 +218,8 @@ enum armcp_packet_id {
 	ARMCP_PACKET_MAX_POWER_GET,		/* sysfs */
 	ARMCP_PACKET_MAX_POWER_SET,		/* sysfs */
 	ARMCP_PACKET_EEPROM_DATA_GET,		/* sysfs */
+	ARMCP_RESERVED,
+	ARMCP_PACKET_TEMPERATURE_SET,		/* sysfs */
 };
 
 #define ARMCP_PACKET_FENCE_VAL	0xFE8CE7A5
@@ -271,24 +277,32 @@ enum armcp_packet_rc {
 	armcp_packet_fault
 };
 
+/*
+ * armcp_temp_type should adhere to hwmon_temp_attributes
+ * defined in Linux kernel hwmon.h file
+ */
 enum armcp_temp_type {
 	armcp_temp_input,
 	armcp_temp_max = 6,
 	armcp_temp_max_hyst,
 	armcp_temp_crit,
-	armcp_temp_crit_hyst
+	armcp_temp_crit_hyst,
+	armcp_temp_offset = 19,
+	armcp_temp_highest = 22
 };
 
 enum armcp_in_attributes {
 	armcp_in_input,
 	armcp_in_min,
-	armcp_in_max
+	armcp_in_max,
+	armcp_in_highest = 7
 };
 
 enum armcp_curr_attributes {
 	armcp_curr_input,
 	armcp_curr_min,
-	armcp_curr_max
+	armcp_curr_max,
+	armcp_curr_highest = 7
 };
 
 enum armcp_fan_attributes {
diff --git a/drivers/misc/habanalabs/include/goya/goya_async_events.h b/drivers/misc/habanalabs/include/goya/goya_async_events.h
index bb7a1aa..5fb9236 100644
--- a/drivers/misc/habanalabs/include/goya/goya_async_events.h
+++ b/drivers/misc/habanalabs/include/goya/goya_async_events.h
@@ -188,6 +188,10 @@ enum goya_async_event_id {
 	GOYA_ASYNC_EVENT_ID_HALT_MACHINE = 485,
 	GOYA_ASYNC_EVENT_ID_INTS_REGISTER = 486,
 	GOYA_ASYNC_EVENT_ID_SOFT_RESET = 487,
+	GOYA_ASYNC_EVENT_ID_FIX_POWER_ENV_S = 507,
+	GOYA_ASYNC_EVENT_ID_FIX_POWER_ENV_E = 508,
+	GOYA_ASYNC_EVENT_ID_FIX_THERMAL_ENV_S = 509,
+	GOYA_ASYNC_EVENT_ID_FIX_THERMAL_ENV_E = 510,
 	GOYA_ASYNC_EVENT_ID_LAST_VALID_ID = 1023,
 	GOYA_ASYNC_EVENT_ID_SIZE
 };
diff --git a/drivers/misc/habanalabs/include/goya/goya_reg_map.h b/drivers/misc/habanalabs/include/goya/goya_reg_map.h
index cd89723..0806128 100644
--- a/drivers/misc/habanalabs/include/goya/goya_reg_map.h
+++ b/drivers/misc/habanalabs/include/goya/goya_reg_map.h
@@ -11,24 +11,27 @@
 /*
  * PSOC scratch-pad registers
  */
-#define mmCPU_PQ_BASE_ADDR_LOW	mmPSOC_GLOBAL_CONF_SCRATCHPAD_0
-#define mmCPU_PQ_BASE_ADDR_HIGH	mmPSOC_GLOBAL_CONF_SCRATCHPAD_1
-#define mmCPU_EQ_BASE_ADDR_LOW	mmPSOC_GLOBAL_CONF_SCRATCHPAD_2
-#define mmCPU_EQ_BASE_ADDR_HIGH	mmPSOC_GLOBAL_CONF_SCRATCHPAD_3
-#define mmCPU_EQ_LENGTH		mmPSOC_GLOBAL_CONF_SCRATCHPAD_4
-#define mmCPU_PQ_LENGTH		mmPSOC_GLOBAL_CONF_SCRATCHPAD_5
-#define mmCPU_EQ_CI		mmPSOC_GLOBAL_CONF_SCRATCHPAD_6
-#define mmCPU_PQ_INIT_STATUS	mmPSOC_GLOBAL_CONF_SCRATCHPAD_7
-#define mmCPU_CQ_BASE_ADDR_LOW	mmPSOC_GLOBAL_CONF_SCRATCHPAD_8
-#define mmCPU_CQ_BASE_ADDR_HIGH	mmPSOC_GLOBAL_CONF_SCRATCHPAD_9
-#define mmCPU_CQ_LENGTH		mmPSOC_GLOBAL_CONF_SCRATCHPAD_10
-#define mmUPD_STS		mmPSOC_GLOBAL_CONF_SCRATCHPAD_26
-#define mmUPD_CMD		mmPSOC_GLOBAL_CONF_SCRATCHPAD_27
-#define mmPREBOOT_VER_OFFSET	mmPSOC_GLOBAL_CONF_SCRATCHPAD_28
-#define mmUBOOT_VER_OFFSET	mmPSOC_GLOBAL_CONF_SCRATCHPAD_29
-#define mmUBOOT_OFFSET		mmPSOC_GLOBAL_CONF_SCRATCHPAD_30
-#define mmBTL_ID		mmPSOC_GLOBAL_CONF_SCRATCHPAD_31
+#define mmCPU_PQ_BASE_ADDR_LOW			mmPSOC_GLOBAL_CONF_SCRATCHPAD_0
+#define mmCPU_PQ_BASE_ADDR_HIGH			mmPSOC_GLOBAL_CONF_SCRATCHPAD_1
+#define mmCPU_EQ_BASE_ADDR_LOW			mmPSOC_GLOBAL_CONF_SCRATCHPAD_2
+#define mmCPU_EQ_BASE_ADDR_HIGH			mmPSOC_GLOBAL_CONF_SCRATCHPAD_3
+#define mmCPU_EQ_LENGTH				mmPSOC_GLOBAL_CONF_SCRATCHPAD_4
+#define mmCPU_PQ_LENGTH				mmPSOC_GLOBAL_CONF_SCRATCHPAD_5
+#define mmCPU_EQ_CI				mmPSOC_GLOBAL_CONF_SCRATCHPAD_6
+#define mmCPU_PQ_INIT_STATUS			mmPSOC_GLOBAL_CONF_SCRATCHPAD_7
+#define mmCPU_CQ_BASE_ADDR_LOW			mmPSOC_GLOBAL_CONF_SCRATCHPAD_8
+#define mmCPU_CQ_BASE_ADDR_HIGH			mmPSOC_GLOBAL_CONF_SCRATCHPAD_9
+#define mmCPU_CQ_LENGTH				mmPSOC_GLOBAL_CONF_SCRATCHPAD_10
+#define mmCPU_BOOT_ERR0				mmPSOC_GLOBAL_CONF_SCRATCHPAD_24
+#define mmCPU_BOOT_ERR1				mmPSOC_GLOBAL_CONF_SCRATCHPAD_25
+#define mmUPD_STS				mmPSOC_GLOBAL_CONF_SCRATCHPAD_26
+#define mmUPD_CMD				mmPSOC_GLOBAL_CONF_SCRATCHPAD_27
+#define mmPREBOOT_VER_OFFSET			mmPSOC_GLOBAL_CONF_SCRATCHPAD_28
+#define mmUBOOT_VER_OFFSET			mmPSOC_GLOBAL_CONF_SCRATCHPAD_29
+#define mmRDWR_TEST				mmPSOC_GLOBAL_CONF_SCRATCHPAD_30
+#define mmBTL_ID				mmPSOC_GLOBAL_CONF_SCRATCHPAD_31
 
-#define mmHW_STATE		mmPSOC_GLOBAL_CONF_APP_STATUS
+#define mmHW_STATE				mmPSOC_GLOBAL_CONF_APP_STATUS
+#define mmPSOC_GLOBAL_CONF_CPU_BOOT_STATUS	mmPSOC_GLOBAL_CONF_WARM_REBOOT
 
 #endif /* GOYA_REG_MAP_H_ */
diff --git a/drivers/misc/habanalabs/include/hl_boot_if.h b/drivers/misc/habanalabs/include/hl_boot_if.h
index 2853a2d..f7992a6 100644
--- a/drivers/misc/habanalabs/include/hl_boot_if.h
+++ b/drivers/misc/habanalabs/include/hl_boot_if.h
@@ -8,20 +8,35 @@
 #ifndef HL_BOOT_IF_H
 #define HL_BOOT_IF_H
 
+#define LKD_HARD_RESET_MAGIC		0xED7BD694
+
+/* CPU error bits in BOOT_ERROR registers */
+#define CPU_BOOT_ERR0_DRAM_INIT_FAIL		(1 << 0)
+#define CPU_BOOT_ERR0_FIT_CORRUPTED		(1 << 1)
+#define CPU_BOOT_ERR0_TS_INIT_FAIL		(1 << 2)
+#define CPU_BOOT_ERR0_DRAM_SKIPPED		(1 << 3)
+#define CPU_BOOT_ERR0_BMC_WAIT_SKIPPED		(1 << 4)
+#define CPU_BOOT_ERR0_NIC_DATA_NOT_RDY		(1 << 5)
+#define CPU_BOOT_ERR0_NIC_FW_FAIL		(1 << 6)
+#define CPU_BOOT_ERR0_ENABLED			(1 << 31)
+
 enum cpu_boot_status {
 	CPU_BOOT_STATUS_NA = 0,		/* Default value after reset of chip */
-	CPU_BOOT_STATUS_IN_WFE,
-	CPU_BOOT_STATUS_DRAM_RDY,
-	CPU_BOOT_STATUS_SRAM_AVAIL,
-	CPU_BOOT_STATUS_IN_BTL,		/* BTL is H/W FSM */
-	CPU_BOOT_STATUS_IN_PREBOOT,
-	CPU_BOOT_STATUS_IN_SPL,
-	CPU_BOOT_STATUS_IN_UBOOT,
-	CPU_BOOT_STATUS_DRAM_INIT_FAIL,
-	CPU_BOOT_STATUS_FIT_CORRUPTED,
-	CPU_BOOT_STATUS_UBOOT_NOT_READY,
-	CPU_BOOT_STATUS_RESERVED,
-	CPU_BOOT_STATUS_TS_INIT_FAIL,
+	CPU_BOOT_STATUS_IN_WFE = 1,
+	CPU_BOOT_STATUS_DRAM_RDY = 2,
+	CPU_BOOT_STATUS_SRAM_AVAIL = 3,
+	CPU_BOOT_STATUS_IN_BTL = 4,	/* BTL is H/W FSM */
+	CPU_BOOT_STATUS_IN_PREBOOT = 5,
+	CPU_BOOT_STATUS_IN_SPL = 6,
+	CPU_BOOT_STATUS_IN_UBOOT = 7,
+	CPU_BOOT_STATUS_DRAM_INIT_FAIL,	/* deprecated - will be removed */
+	CPU_BOOT_STATUS_FIT_CORRUPTED,	/* deprecated - will be removed */
+	CPU_BOOT_STATUS_UBOOT_NOT_READY = 10,
+	CPU_BOOT_STATUS_NIC_FW_RDY = 11,
+	CPU_BOOT_STATUS_TS_INIT_FAIL,	/* deprecated - will be removed */
+	CPU_BOOT_STATUS_DRAM_SKIPPED,	/* deprecated - will be removed */
+	CPU_BOOT_STATUS_BMC_WAITING_SKIPPED, /* deprecated - will be removed */
+	CPU_BOOT_STATUS_READY_TO_BOOT = 15,
 };
 
 enum kmd_msg {
diff --git a/drivers/misc/habanalabs/memory.c b/drivers/misc/habanalabs/memory.c
index 6c72cb4..a72f766 100644
--- a/drivers/misc/habanalabs/memory.c
+++ b/drivers/misc/habanalabs/memory.c
@@ -530,7 +530,7 @@ static u64 get_va_block(struct hl_device *hdev,
 		 * or not, hence we continue with the biggest possible
 		 * granularity.
 		 */
-		page_size = hdev->asic_prop.pmmu.huge_page_size;
+		page_size = hdev->asic_prop.pmmu_huge.page_size;
 	else
 		page_size = hdev->asic_prop.dmmu.page_size;
 
@@ -638,13 +638,12 @@ static int init_phys_pg_pack_from_userptr(struct hl_ctx *ctx,
 				struct hl_userptr *userptr,
 				struct hl_vm_phys_pg_pack **pphys_pg_pack)
 {
-	struct hl_mmu_properties *mmu_prop = &ctx->hdev->asic_prop.pmmu;
 	struct hl_vm_phys_pg_pack *phys_pg_pack;
 	struct scatterlist *sg;
 	dma_addr_t dma_addr;
 	u64 page_mask, total_npages;
 	u32 npages, page_size = PAGE_SIZE,
-		huge_page_size = mmu_prop->huge_page_size;
+		huge_page_size = ctx->hdev->asic_prop.pmmu_huge.page_size;
 	bool first = true, is_huge_page_opt = true;
 	int rc, i, j;
 	u32 pgs_in_huge_page = huge_page_size >> __ffs(page_size);
@@ -747,7 +746,8 @@ static int map_phys_pg_pack(struct hl_ctx *ctx, u64 vaddr,
 	for (i = 0 ; i < phys_pg_pack->npages ; i++) {
 		paddr = phys_pg_pack->pages[i];
 
-		rc = hl_mmu_map(ctx, next_vaddr, paddr, page_size);
+		rc = hl_mmu_map(ctx, next_vaddr, paddr, page_size,
+				(i + 1) == phys_pg_pack->npages);
 		if (rc) {
 			dev_err(hdev->dev,
 				"map failed for handle %u, npages: %llu, mapped: %llu",
@@ -765,7 +765,8 @@ static int map_phys_pg_pack(struct hl_ctx *ctx, u64 vaddr,
 err:
 	next_vaddr = vaddr;
 	for (i = 0 ; i < mapped_pg_cnt ; i++) {
-		if (hl_mmu_unmap(ctx, next_vaddr, page_size))
+		if (hl_mmu_unmap(ctx, next_vaddr, page_size,
+					(i + 1) == mapped_pg_cnt))
 			dev_warn_ratelimited(hdev->dev,
 				"failed to unmap handle %u, va: 0x%llx, pa: 0x%llx, page size: %u\n",
 					phys_pg_pack->handle, next_vaddr,
@@ -794,7 +795,8 @@ static void unmap_phys_pg_pack(struct hl_ctx *ctx, u64 vaddr,
 	next_vaddr = vaddr;
 
 	for (i = 0 ; i < phys_pg_pack->npages ; i++, next_vaddr += page_size) {
-		if (hl_mmu_unmap(ctx, next_vaddr, page_size))
+		if (hl_mmu_unmap(ctx, next_vaddr, page_size,
+				       (i + 1) == phys_pg_pack->npages))
 			dev_warn_ratelimited(hdev->dev,
 			"unmap failed for vaddr: 0x%llx\n", next_vaddr);
 
@@ -853,6 +855,7 @@ static int map_device_va(struct hl_ctx *ctx, struct hl_mem_in *args,
 	struct hl_vm_phys_pg_pack *phys_pg_pack;
 	struct hl_userptr *userptr = NULL;
 	struct hl_vm_hash_node *hnode;
+	struct hl_va_range *va_range;
 	enum vm_type_t *vm_type;
 	u64 ret_vaddr, hint_addr;
 	u32 handle = 0;
@@ -924,9 +927,16 @@ static int map_device_va(struct hl_ctx *ctx, struct hl_mem_in *args,
 		goto hnode_err;
 	}
 
-	ret_vaddr = get_va_block(hdev,
-			is_userptr ? &ctx->host_va_range : &ctx->dram_va_range,
-			phys_pg_pack->total_size, hint_addr, is_userptr);
+	if (is_userptr)
+		if (phys_pg_pack->page_size == hdev->asic_prop.pmmu.page_size)
+			va_range = ctx->host_va_range;
+		else
+			va_range = ctx->host_huge_va_range;
+	else
+		va_range = ctx->dram_va_range;
+
+	ret_vaddr = get_va_block(hdev, va_range, phys_pg_pack->total_size,
+					hint_addr, is_userptr);
 	if (!ret_vaddr) {
 		dev_err(hdev->dev, "no available va block for handle %u\n",
 				handle);
@@ -965,10 +975,8 @@ static int map_device_va(struct hl_ctx *ctx, struct hl_mem_in *args,
 	return 0;
 
 map_err:
-	if (add_va_block(hdev,
-			is_userptr ? &ctx->host_va_range : &ctx->dram_va_range,
-			ret_vaddr,
-			ret_vaddr + phys_pg_pack->total_size - 1))
+	if (add_va_block(hdev, va_range, ret_vaddr,
+				ret_vaddr + phys_pg_pack->total_size - 1))
 		dev_warn(hdev->dev,
 			"release va block failed for handle 0x%x, vaddr: 0x%llx\n",
 				handle, ret_vaddr);
@@ -1030,7 +1038,6 @@ static int unmap_device_va(struct hl_ctx *ctx, u64 vaddr, bool ctx_free)
 
 	if (*vm_type == VM_TYPE_USERPTR) {
 		is_userptr = true;
-		va_range = &ctx->host_va_range;
 		userptr = hnode->ptr;
 		rc = init_phys_pg_pack_from_userptr(ctx, userptr,
 							&phys_pg_pack);
@@ -1040,9 +1047,15 @@ static int unmap_device_va(struct hl_ctx *ctx, u64 vaddr, bool ctx_free)
 				vaddr);
 			goto vm_type_err;
 		}
+
+		if (phys_pg_pack->page_size ==
+					hdev->asic_prop.pmmu.page_size)
+			va_range = ctx->host_va_range;
+		else
+			va_range = ctx->host_huge_va_range;
 	} else if (*vm_type == VM_TYPE_PHYS_PACK) {
 		is_userptr = false;
-		va_range = &ctx->dram_va_range;
+		va_range = ctx->dram_va_range;
 		phys_pg_pack = hnode->ptr;
 	} else {
 		dev_warn(hdev->dev,
@@ -1438,19 +1451,18 @@ bool hl_userptr_is_pinned(struct hl_device *hdev, u64 addr,
 }
 
 /*
- * hl_va_range_init - initialize virtual addresses range
- *
- * @hdev                : pointer to the habanalabs device structure
- * @va_range            : pointer to the range to initialize
- * @start               : range start address
- * @end                 : range end address
+ * va_range_init - initialize virtual addresses range
+ * @hdev: pointer to the habanalabs device structure
+ * @va_range: pointer to the range to initialize
+ * @start: range start address
+ * @end: range end address
  *
  * This function does the following:
  * - Initializes the virtual addresses list of the given range with the given
  *   addresses.
  */
-static int hl_va_range_init(struct hl_device *hdev,
-		struct hl_va_range *va_range, u64 start, u64 end)
+static int va_range_init(struct hl_device *hdev, struct hl_va_range *va_range,
+				u64 start, u64 end)
 {
 	int rc;
 
@@ -1485,47 +1497,105 @@ static int hl_va_range_init(struct hl_device *hdev,
 }
 
 /*
- * hl_vm_ctx_init_with_ranges - initialize virtual memory for context
+ * va_range_fini() - clear a virtual addresses range
+ * @hdev: pointer to the habanalabs structure
+ * va_range: pointer to virtual addresses range
  *
- * @ctx                 : pointer to the habanalabs context structure
- * @host_range_start    : host virtual addresses range start
- * @host_range_end      : host virtual addresses range end
- * @dram_range_start    : dram virtual addresses range start
- * @dram_range_end      : dram virtual addresses range end
+ * This function does the following:
+ * - Frees the virtual addresses block list and its lock
+ */
+static void va_range_fini(struct hl_device *hdev,
+		struct hl_va_range *va_range)
+{
+	mutex_lock(&va_range->lock);
+	clear_va_list_locked(hdev, &va_range->list);
+	mutex_unlock(&va_range->lock);
+
+	mutex_destroy(&va_range->lock);
+	kfree(va_range);
+}
+
+/*
+ * vm_ctx_init_with_ranges() - initialize virtual memory for context
+ * @ctx: pointer to the habanalabs context structure
+ * @host_range_start: host virtual addresses range start.
+ * @host_range_end: host virtual addresses range end.
+ * @host_huge_range_start: host virtual addresses range start for memory
+ *                          allocated with huge pages.
+ * @host_huge_range_end: host virtual addresses range end for memory allocated
+ *                        with huge pages.
+ * @dram_range_start: dram virtual addresses range start.
+ * @dram_range_end: dram virtual addresses range end.
  *
  * This function initializes the following:
  * - MMU for context
  * - Virtual address to area descriptor hashtable
  * - Virtual block list of available virtual memory
  */
-static int hl_vm_ctx_init_with_ranges(struct hl_ctx *ctx, u64 host_range_start,
-				u64 host_range_end, u64 dram_range_start,
-				u64 dram_range_end)
+static int vm_ctx_init_with_ranges(struct hl_ctx *ctx,
+					u64 host_range_start,
+					u64 host_range_end,
+					u64 host_huge_range_start,
+					u64 host_huge_range_end,
+					u64 dram_range_start,
+					u64 dram_range_end)
 {
 	struct hl_device *hdev = ctx->hdev;
 	int rc;
 
+	ctx->host_va_range = kzalloc(sizeof(*ctx->host_va_range), GFP_KERNEL);
+	if (!ctx->host_va_range)
+		return -ENOMEM;
+
+	ctx->host_huge_va_range = kzalloc(sizeof(*ctx->host_huge_va_range),
+						GFP_KERNEL);
+	if (!ctx->host_huge_va_range) {
+		rc =  -ENOMEM;
+		goto host_huge_va_range_err;
+	}
+
+	ctx->dram_va_range = kzalloc(sizeof(*ctx->dram_va_range), GFP_KERNEL);
+	if (!ctx->dram_va_range) {
+		rc = -ENOMEM;
+		goto dram_va_range_err;
+	}
+
 	rc = hl_mmu_ctx_init(ctx);
 	if (rc) {
 		dev_err(hdev->dev, "failed to init context %d\n", ctx->asid);
-		return rc;
+		goto mmu_ctx_err;
 	}
 
 	mutex_init(&ctx->mem_hash_lock);
 	hash_init(ctx->mem_hash);
 
-	mutex_init(&ctx->host_va_range.lock);
+	mutex_init(&ctx->host_va_range->lock);
 
-	rc = hl_va_range_init(hdev, &ctx->host_va_range, host_range_start,
-			host_range_end);
+	rc = va_range_init(hdev, ctx->host_va_range, host_range_start,
+				host_range_end);
 	if (rc) {
 		dev_err(hdev->dev, "failed to init host vm range\n");
-		goto host_vm_err;
+		goto host_page_range_err;
 	}
 
-	mutex_init(&ctx->dram_va_range.lock);
+	if (hdev->pmmu_huge_range) {
+		mutex_init(&ctx->host_huge_va_range->lock);
 
-	rc = hl_va_range_init(hdev, &ctx->dram_va_range, dram_range_start,
+		rc = va_range_init(hdev, ctx->host_huge_va_range,
+					host_huge_range_start,
+					host_huge_range_end);
+		if (rc) {
+			dev_err(hdev->dev,
+				"failed to init host huge vm range\n");
+			goto host_hpage_range_err;
+		}
+	} else {
+		ctx->host_huge_va_range = ctx->host_va_range;
+	}
+
+	mutex_init(&ctx->dram_va_range->lock);
+
+	rc = va_range_init(hdev, ctx->dram_va_range, dram_range_start,
 			dram_range_end);
 	if (rc) {
 		dev_err(hdev->dev, "failed to init dram vm range\n");
@@ -1537,15 +1607,29 @@ static int hl_vm_ctx_init_with_ranges(struct hl_ctx *ctx, u64 host_range_start,
 	return 0;
 
 dram_vm_err:
-	mutex_destroy(&ctx->dram_va_range.lock);
+	mutex_destroy(&ctx->dram_va_range->lock);
 
-	mutex_lock(&ctx->host_va_range.lock);
-	clear_va_list_locked(hdev, &ctx->host_va_range.list);
-	mutex_unlock(&ctx->host_va_range.lock);
-host_vm_err:
-	mutex_destroy(&ctx->host_va_range.lock);
+	if (hdev->pmmu_huge_range) {
+		mutex_lock(&ctx->host_huge_va_range->lock);
+		clear_va_list_locked(hdev, &ctx->host_huge_va_range->list);
+		mutex_unlock(&ctx->host_huge_va_range->lock);
+	}
+host_hpage_range_err:
+	if (hdev->pmmu_huge_range)
+		mutex_destroy(&ctx->host_huge_va_range->lock);
+	mutex_lock(&ctx->host_va_range->lock);
+	clear_va_list_locked(hdev, &ctx->host_va_range->list);
+	mutex_unlock(&ctx->host_va_range->lock);
+host_page_range_err:
+	mutex_destroy(&ctx->host_va_range->lock);
 	mutex_destroy(&ctx->mem_hash_lock);
 	hl_mmu_ctx_fini(ctx);
+mmu_ctx_err:
+	kfree(ctx->dram_va_range);
+dram_va_range_err:
+	kfree(ctx->host_huge_va_range);
+host_huge_va_range_err:
+	kfree(ctx->host_va_range);
 
 	return rc;
 }
@@ -1553,8 +1637,8 @@ static int hl_vm_ctx_init_with_ranges(struct hl_ctx *ctx, u64 host_range_start,
 int hl_vm_ctx_init(struct hl_ctx *ctx)
 {
 	struct asic_fixed_properties *prop = &ctx->hdev->asic_prop;
-	u64 host_range_start, host_range_end, dram_range_start,
-		dram_range_end;
+	u64 host_range_start, host_range_end, host_huge_range_start,
+		host_huge_range_end, dram_range_start, dram_range_end;
 
 	atomic64_set(&ctx->dram_phys_mem, 0);
 
@@ -1566,38 +1650,26 @@ int hl_vm_ctx_init(struct hl_ctx *ctx)
 	 *   address of the memory related to the given handle.
 	 */
 	if (ctx->hdev->mmu_enable) {
-		dram_range_start = prop->va_space_dram_start_address;
-		dram_range_end = prop->va_space_dram_end_address;
-		host_range_start = prop->va_space_host_start_address;
-		host_range_end = prop->va_space_host_end_address;
+		dram_range_start = prop->dmmu.start_addr;
+		dram_range_end = prop->dmmu.end_addr;
+		host_range_start = prop->pmmu.start_addr;
+		host_range_end = prop->pmmu.end_addr;
+		host_huge_range_start = prop->pmmu_huge.start_addr;
+		host_huge_range_end = prop->pmmu_huge.end_addr;
 	} else {
 		dram_range_start = prop->dram_user_base_address;
 		dram_range_end = prop->dram_end_address;
 		host_range_start = prop->dram_user_base_address;
 		host_range_end = prop->dram_end_address;
+		host_huge_range_start = prop->dram_user_base_address;
+		host_huge_range_end = prop->dram_end_address;
 	}
 
-	return hl_vm_ctx_init_with_ranges(ctx, host_range_start, host_range_end,
-			dram_range_start, dram_range_end);
-}
-
-/*
- * hl_va_range_fini     - clear a virtual addresses range
- *
- * @hdev                : pointer to the habanalabs structure
- * va_range             : pointer to virtual addresses range
- *
- * This function does the following:
- * - Frees the virtual addresses block list and its lock
- */
-static void hl_va_range_fini(struct hl_device *hdev,
-		struct hl_va_range *va_range)
-{
-	mutex_lock(&va_range->lock);
-	clear_va_list_locked(hdev, &va_range->list);
-	mutex_unlock(&va_range->lock);
-
-	mutex_destroy(&va_range->lock);
+	return vm_ctx_init_with_ranges(ctx, host_range_start, host_range_end,
+					host_huge_range_start,
+					host_huge_range_end,
+					dram_range_start,
+					dram_range_end);
 }
 
 /*
@@ -1664,8 +1736,10 @@ void hl_vm_ctx_fini(struct hl_ctx *ctx)
 		}
 	spin_unlock(&vm->idr_lock);
 
-	hl_va_range_fini(hdev, &ctx->dram_va_range);
-	hl_va_range_fini(hdev, &ctx->host_va_range);
+	va_range_fini(hdev, ctx->dram_va_range);
+	if (hdev->pmmu_huge_range)
+		va_range_fini(hdev, ctx->host_huge_va_range);
+	va_range_fini(hdev, ctx->host_va_range);
 
 	mutex_destroy(&ctx->mem_hash_lock);
 	hl_mmu_ctx_fini(ctx);
diff --git a/drivers/misc/habanalabs/mmu.c b/drivers/misc/habanalabs/mmu.c
index 6262b26..a290d6b 100644
--- a/drivers/misc/habanalabs/mmu.c
+++ b/drivers/misc/habanalabs/mmu.c
@@ -254,6 +254,15 @@ static inline u64 get_phys_addr(struct hl_ctx *ctx, u64 shadow_addr)
 	return phys_hop_addr + pte_offset;
 }
 
+static bool is_dram_va(struct hl_device *hdev, u64 virt_addr)
+{
+	struct asic_fixed_properties *prop = &hdev->asic_prop;
+
+	return hl_mem_area_inside_range(virt_addr, prop->dmmu.page_size,
+					prop->dmmu.start_addr,
+					prop->dmmu.end_addr);
+}
+
 static int dram_default_mapping_init(struct hl_ctx *ctx)
 {
 	struct hl_device *hdev = ctx->hdev;
@@ -548,6 +557,7 @@ static int _hl_mmu_unmap(struct hl_ctx *ctx, u64 virt_addr, bool is_dram_addr)
 		curr_pte;
 	bool is_huge, clear_hop3 = true;
 
+	/* shifts and masks are the same in PMMU and HPMMU, use one of them */
 	mmu_prop = is_dram_addr ? &prop->dmmu : &prop->pmmu;
 
 	hop0_addr = get_hop0_addr(ctx);
@@ -637,29 +647,27 @@ static int _hl_mmu_unmap(struct hl_ctx *ctx, u64 virt_addr, bool is_dram_addr)
 			clear_hop3 = true;
 
 		if (!clear_hop3)
-			goto flush;
+			goto mapped;
 
 		clear_pte(ctx, hop3_pte_addr);
 
 		if (put_pte(ctx, hop3_addr))
-			goto flush;
+			goto mapped;
 
 		clear_pte(ctx, hop2_pte_addr);
 
 		if (put_pte(ctx, hop2_addr))
-			goto flush;
+			goto mapped;
 
 		clear_pte(ctx, hop1_pte_addr);
 
 		if (put_pte(ctx, hop1_addr))
-			goto flush;
+			goto mapped;
 
 		clear_pte(ctx, hop0_pte_addr);
 	}
 
-flush:
-	flush(ctx);
-
+mapped:
 	return 0;
 
 not_mapped:
@@ -675,6 +683,7 @@ static int _hl_mmu_unmap(struct hl_ctx *ctx, u64 virt_addr, bool is_dram_addr)
  * @ctx: pointer to the context structure
  * @virt_addr: virt addr to map from
  * @page_size: size of the page to unmap
+ * @flush_pte: whether to do a PCI flush
  *
  * This function does the following:
  * - Check that the virt addr is mapped
@@ -685,40 +694,43 @@ static int _hl_mmu_unmap(struct hl_ctx *ctx, u64 virt_addr, bool is_dram_addr)
  * changes the MMU hash, it must be protected by a lock.
  * However, because it maps only a single page, the lock should be implemented
  * in a higher level in order to protect the entire mapping of the memory area
+ *
+ * For optimization reasons PCI flush may be requested once after unmapping of
+ * large area.
  */
-int hl_mmu_unmap(struct hl_ctx *ctx, u64 virt_addr, u32 page_size)
+int hl_mmu_unmap(struct hl_ctx *ctx, u64 virt_addr, u32 page_size,
+		bool flush_pte)
 {
 	struct hl_device *hdev = ctx->hdev;
 	struct asic_fixed_properties *prop = &hdev->asic_prop;
 	struct hl_mmu_properties *mmu_prop;
 	u64 real_virt_addr;
 	u32 real_page_size, npages;
-	int i, rc;
+	int i, rc = 0;
 	bool is_dram_addr;
 
 	if (!hdev->mmu_enable)
 		return 0;
 
-	is_dram_addr = hl_mem_area_inside_range(virt_addr, prop->dmmu.page_size,
-				prop->va_space_dram_start_address,
-				prop->va_space_dram_end_address);
+	is_dram_addr = is_dram_va(hdev, virt_addr);
 
-	mmu_prop = is_dram_addr ? &prop->dmmu : &prop->pmmu;
+	if (is_dram_addr)
+		mmu_prop = &prop->dmmu;
+	else if ((page_size % prop->pmmu_huge.page_size) == 0)
+		mmu_prop = &prop->pmmu_huge;
+	else
+		mmu_prop = &prop->pmmu;
 
 	/*
 	 * The H/W handles mapping of specific page sizes. Hence if the page
 	 * size is bigger, we break it to sub-pages and unmap them separately.
 	 */
-	if ((page_size % mmu_prop->huge_page_size) == 0) {
-		real_page_size = mmu_prop->huge_page_size;
-	} else if ((page_size % mmu_prop->page_size) == 0) {
+	if ((page_size % mmu_prop->page_size) == 0) {
 		real_page_size = mmu_prop->page_size;
 	} else {
 		dev_err(hdev->dev,
-			"page size of %u is not %uKB nor %uMB aligned, can't unmap\n",
-			page_size,
-			mmu_prop->page_size >> 10,
-			mmu_prop->huge_page_size >> 20);
+			"page size of %u is not %uKB aligned, can't unmap\n",
+			page_size, mmu_prop->page_size >> 10);
 
 		return -EFAULT;
 	}
@@ -729,12 +741,15 @@ int hl_mmu_unmap(struct hl_ctx *ctx, u64 virt_addr, u32 page_size)
 	for (i = 0 ; i < npages ; i++) {
 		rc = _hl_mmu_unmap(ctx, real_virt_addr, is_dram_addr);
 		if (rc)
-			return rc;
+			break;
 
 		real_virt_addr += real_page_size;
 	}
 
-	return 0;
+	if (flush_pte)
+		flush(ctx);
+
+	return rc;
 }
 
 static int _hl_mmu_map(struct hl_ctx *ctx, u64 virt_addr, u64 phys_addr,
@@ -753,8 +768,6 @@ static int _hl_mmu_map(struct hl_ctx *ctx, u64 virt_addr, u64 phys_addr,
 		hop4_new = false, is_huge;
 	int rc = -ENOMEM;
 
-	mmu_prop = is_dram_addr ? &prop->dmmu : &prop->pmmu;
-
 	/*
 	 * This mapping function can map a page or a huge page. For huge page
 	 * there are only 3 hops rather than 4. Currently the DRAM allocation
@@ -762,11 +775,15 @@ static int _hl_mmu_map(struct hl_ctx *ctx, u64 virt_addr, u64 phys_addr,
 	 * one of the two page sizes. Since this is a common code for all the
 	 * three cases, we need this hugs page check.
 	 */
-	is_huge = page_size == mmu_prop->huge_page_size;
-
-	if (is_dram_addr && !is_huge) {
-		dev_err(hdev->dev, "DRAM mapping should use huge pages only\n");
-		return -EFAULT;
+	if (is_dram_addr) {
+		mmu_prop = &prop->dmmu;
+		is_huge = true;
+	} else if (page_size == prop->pmmu_huge.page_size) {
+		mmu_prop = &prop->pmmu_huge;
+		is_huge = true;
+	} else {
+		mmu_prop = &prop->pmmu;
+		is_huge = false;
 	}
 
 	hop0_addr = get_hop0_addr(ctx);
@@ -885,8 +902,6 @@ static int _hl_mmu_map(struct hl_ctx *ctx, u64 virt_addr, u64 phys_addr,
 		get_pte(ctx, hop3_addr);
 	}
 
-	flush(ctx);
-
 	return 0;
 
 err:
@@ -909,6 +924,7 @@ static int _hl_mmu_map(struct hl_ctx *ctx, u64 virt_addr, u64 phys_addr,
  * @virt_addr: virt addr to map from
  * @phys_addr: phys addr to map to
  * @page_size: physical page size
+ * @flush_pte: whether to do a PCI flush
  *
  * This function does the following:
  * - Check that the virt addr is not mapped
@@ -919,8 +935,12 @@ static int _hl_mmu_map(struct hl_ctx *ctx, u64 virt_addr, u64 phys_addr,
  * changes the MMU hash, it must be protected by a lock.
  * However, because it maps only a single page, the lock should be implemented
  * in a higher level in order to protect the entire mapping of the memory area
+ *
+ * For optimization reasons PCI flush may be requested once after mapping of
+ * large area.
  */
-int hl_mmu_map(struct hl_ctx *ctx, u64 virt_addr, u64 phys_addr, u32 page_size)
+int hl_mmu_map(struct hl_ctx *ctx, u64 virt_addr, u64 phys_addr, u32 page_size,
+		bool flush_pte)
 {
 	struct hl_device *hdev = ctx->hdev;
 	struct asic_fixed_properties *prop = &hdev->asic_prop;
@@ -933,26 +953,25 @@ int hl_mmu_map(struct hl_ctx *ctx, u64 virt_addr, u64 phys_addr, u32 page_size)
 	if (!hdev->mmu_enable)
 		return 0;
 
-	is_dram_addr = hl_mem_area_inside_range(virt_addr, prop->dmmu.page_size,
-				prop->va_space_dram_start_address,
-				prop->va_space_dram_end_address);
+	is_dram_addr = is_dram_va(hdev, virt_addr);
 
-	mmu_prop = is_dram_addr ? &prop->dmmu : &prop->pmmu;
+	if (is_dram_addr)
+		mmu_prop = &prop->dmmu;
+	else if ((page_size % prop->pmmu_huge.page_size) == 0)
+		mmu_prop = &prop->pmmu_huge;
+	else
+		mmu_prop = &prop->pmmu;
 
 	/*
 	 * The H/W handles mapping of specific page sizes. Hence if the page
 	 * size is bigger, we break it to sub-pages and map them separately.
 	 */
-	if ((page_size % mmu_prop->huge_page_size) == 0) {
-		real_page_size = mmu_prop->huge_page_size;
-	} else if ((page_size % mmu_prop->page_size) == 0) {
+	if ((page_size % mmu_prop->page_size) == 0) {
 		real_page_size = mmu_prop->page_size;
 	} else {
 		dev_err(hdev->dev,
-			"page size of %u is not %dKB nor %dMB aligned, can't unmap\n",
-			page_size,
-			mmu_prop->page_size >> 10,
-			mmu_prop->huge_page_size >> 20);
+			"page size of %u is not %uKB aligned, can't unmap\n",
+			page_size, mmu_prop->page_size >> 10);
 
 		return -EFAULT;
 	}
@@ -976,6 +995,9 @@ int hl_mmu_map(struct hl_ctx *ctx, u64 virt_addr, u64 phys_addr, u32 page_size)
 		mapped_cnt++;
 	}
 
+	if (flush_pte)
+		flush(ctx);
+
 	return 0;
 
 err:
@@ -988,6 +1010,8 @@ int hl_mmu_map(struct hl_ctx *ctx, u64 virt_addr, u64 phys_addr, u32 page_size)
 		real_virt_addr += real_page_size;
 	}
 
+	flush(ctx);
+
 	return rc;
 }
 
diff --git a/drivers/misc/lkdtm/bugs.c b/drivers/misc/lkdtm/bugs.c
index cc92bc3..886459e 100644
--- a/drivers/misc/lkdtm/bugs.c
+++ b/drivers/misc/lkdtm/bugs.c
@@ -11,6 +11,7 @@
 #include <linux/sched/signal.h>
 #include <linux/sched/task_stack.h>
 #include <linux/uaccess.h>
+#include <linux/slab.h>
 
 #ifdef CONFIG_X86_32
 #include <asm/desc.h>
@@ -175,6 +176,80 @@ void lkdtm_HUNG_TASK(void)
 	schedule();
 }
 
+volatile unsigned int huge = INT_MAX - 2;
+volatile unsigned int ignored;
+
+void lkdtm_OVERFLOW_SIGNED(void)
+{
+	int value;
+
+	value = huge;
+	pr_info("Normal signed addition ...\n");
+	value += 1;
+	ignored = value;
+
+	pr_info("Overflowing signed addition ...\n");
+	value += 4;
+	ignored = value;
+}
+
+
+void lkdtm_OVERFLOW_UNSIGNED(void)
+{
+	unsigned int value;
+
+	value = huge;
+	pr_info("Normal unsigned addition ...\n");
+	value += 1;
+	ignored = value;
+
+	pr_info("Overflowing unsigned addition ...\n");
+	value += 4;
+	ignored = value;
+}
+
+/* Intentially using old-style flex array definition of 1 byte. */
+struct array_bounds_flex_array {
+	int one;
+	int two;
+	char data[1];
+};
+
+struct array_bounds {
+	int one;
+	int two;
+	char data[8];
+	int three;
+};
+
+void lkdtm_ARRAY_BOUNDS(void)
+{
+	struct array_bounds_flex_array *not_checked;
+	struct array_bounds *checked;
+	volatile int i;
+
+	not_checked = kmalloc(sizeof(*not_checked) * 2, GFP_KERNEL);
+	checked = kmalloc(sizeof(*checked) * 2, GFP_KERNEL);
+
+	pr_info("Array access within bounds ...\n");
+	/* For both, touch all bytes in the actual member size. */
+	for (i = 0; i < sizeof(checked->data); i++)
+		checked->data[i] = 'A';
+	/*
+	 * For the uninstrumented flex array member, also touch 1 byte
+	 * beyond to verify it is correctly uninstrumented.
+	 */
+	for (i = 0; i < sizeof(not_checked->data) + 1; i++)
+		not_checked->data[i] = 'A';
+
+	pr_info("Array access beyond bounds ...\n");
+	for (i = 0; i < sizeof(checked->data) + 1; i++)
+		checked->data[i] = 'B';
+
+	kfree(not_checked);
+	kfree(checked);
+}
+
 void lkdtm_CORRUPT_LIST_ADD(void)
 {
 	/*
diff --git a/drivers/misc/lkdtm/core.c b/drivers/misc/lkdtm/core.c
index 5ce4ac8..a5e344d 100644
--- a/drivers/misc/lkdtm/core.c
+++ b/drivers/misc/lkdtm/core.c
@@ -130,6 +130,9 @@ static const struct crashtype crashtypes[] = {
 	CRASHTYPE(HARDLOCKUP),
 	CRASHTYPE(SPINLOCKUP),
 	CRASHTYPE(HUNG_TASK),
+	CRASHTYPE(OVERFLOW_SIGNED),
+	CRASHTYPE(OVERFLOW_UNSIGNED),
+	CRASHTYPE(ARRAY_BOUNDS),
 	CRASHTYPE(EXEC_DATA),
 	CRASHTYPE(EXEC_STACK),
 	CRASHTYPE(EXEC_KMALLOC),
diff --git a/drivers/misc/lkdtm/lkdtm.h b/drivers/misc/lkdtm/lkdtm.h
index 8d13d01..601a215 100644
--- a/drivers/misc/lkdtm/lkdtm.h
+++ b/drivers/misc/lkdtm/lkdtm.h
@@ -22,6 +22,9 @@ void lkdtm_SOFTLOCKUP(void);
 void lkdtm_HARDLOCKUP(void);
 void lkdtm_SPINLOCKUP(void);
 void lkdtm_HUNG_TASK(void);
+void lkdtm_OVERFLOW_SIGNED(void);
+void lkdtm_OVERFLOW_UNSIGNED(void);
+void lkdtm_ARRAY_BOUNDS(void);
 void lkdtm_CORRUPT_LIST_ADD(void);
 void lkdtm_CORRUPT_LIST_DEL(void);
 void lkdtm_CORRUPT_USER_DS(void);
diff --git a/drivers/misc/lkdtm/stackleak.c b/drivers/misc/lkdtm/stackleak.c
index d5a0844..d1a5c07 100644
--- a/drivers/misc/lkdtm/stackleak.c
+++ b/drivers/misc/lkdtm/stackleak.c
@@ -16,6 +16,7 @@ void lkdtm_STACKLEAK_ERASING(void)
 	unsigned long *sp, left, found, i;
 	const unsigned long check_depth =
 			STACKLEAK_SEARCH_DEPTH / sizeof(unsigned long);
+	bool test_failed = false;
 
 	/*
 	 * For the details about the alignment of the poison values, see
@@ -34,7 +35,8 @@ void lkdtm_STACKLEAK_ERASING(void)
 		left--;
 	} else {
 		pr_err("FAIL: not enough stack space for the test\n");
-		return;
+		test_failed = true;
+		goto end;
 	}
 
 	pr_info("checking unused part of the thread stack (%lu bytes)...\n",
@@ -52,22 +54,29 @@ void lkdtm_STACKLEAK_ERASING(void)
 	}
 
 	if (found <= check_depth) {
-		pr_err("FAIL: thread stack is not erased (checked %lu bytes)\n",
+		pr_err("FAIL: the erased part is not found (checked %lu bytes)\n",
 						i * sizeof(unsigned long));
-		return;
+		test_failed = true;
+		goto end;
 	}
 
-	pr_info("first %lu bytes are unpoisoned\n",
+	pr_info("the erased part begins after %lu not poisoned bytes\n",
 				(i - found) * sizeof(unsigned long));
 
 	/* The rest of thread stack should be erased */
 	for (; i < left; i++) {
 		if (*(sp - i) != STACKLEAK_POISON) {
-			pr_err("FAIL: thread stack is NOT properly erased\n");
-			return;
+			pr_err("FAIL: bad value number %lu in the erased part: 0x%lx\n",
+								i, *(sp - i));
+			test_failed = true;
 		}
 	}
 
-	pr_info("OK: the rest of the thread stack is properly erased\n");
-	return;
+end:
+	if (test_failed) {
+		pr_err("FAIL: the thread stack is NOT properly erased\n");
+		dump_stack();
+	} else {
+		pr_info("OK: the rest of the thread stack is properly erased\n");
+	}
 }
diff --git a/drivers/misc/mei/bus-fixup.c b/drivers/misc/mei/bus-fixup.c
index 9ad9c01..910f059 100644
--- a/drivers/misc/mei/bus-fixup.c
+++ b/drivers/misc/mei/bus-fixup.c
@@ -91,7 +91,7 @@ struct mkhi_rule_id {
 struct mkhi_fwcaps {
 	struct mkhi_rule_id id;
 	u8 len;
-	u8 data[0];
+	u8 data[];
 } __packed;
 
 struct mkhi_fw_ver_block {
@@ -119,7 +119,7 @@ struct mkhi_msg_hdr {
 
 struct mkhi_msg {
 	struct mkhi_msg_hdr hdr;
-	u8 data[0];
+	u8 data[];
 } __packed;
 
 #define MKHI_OSVER_BUF_LEN (sizeof(struct mkhi_msg_hdr) + \
diff --git a/drivers/misc/mei/client.c b/drivers/misc/mei/client.c
index 1e3edbb..204d807 100644
--- a/drivers/misc/mei/client.c
+++ b/drivers/misc/mei/client.c
@@ -1585,7 +1585,7 @@ int mei_cl_irq_write(struct mei_cl *cl, struct mei_cl_cb *cb,
 		goto err;
 	}
 
-	hbuf_len = mei_slots2data(hbuf_slots);
+	hbuf_len = mei_slots2data(hbuf_slots) & MEI_MSG_MAX_LEN_MASK;
 	dr_slots = mei_dma_ring_empty_slots(dev);
 	dr_len = mei_slots2data(dr_slots);
 
@@ -1718,7 +1718,7 @@ ssize_t mei_cl_write(struct mei_cl *cl, struct mei_cl_cb *cb)
 		goto out;
 	}
 
-	hbuf_len = mei_slots2data(hbuf_slots);
+	hbuf_len = mei_slots2data(hbuf_slots) & MEI_MSG_MAX_LEN_MASK;
 	dr_slots = mei_dma_ring_empty_slots(dev);
 	dr_len =  mei_slots2data(dr_slots);
 
diff --git a/drivers/misc/mei/hw-me-regs.h b/drivers/misc/mei/hw-me-regs.h
index 87a0201..9392934 100644
--- a/drivers/misc/mei/hw-me-regs.h
+++ b/drivers/misc/mei/hw-me-regs.h
@@ -75,9 +75,9 @@
 #define MEI_DEV_ID_KBP_2      0xA2BB  /* Kaby Point 2 */
 
 #define MEI_DEV_ID_CNP_LP     0x9DE0  /* Cannon Point LP */
-#define MEI_DEV_ID_CNP_LP_4   0x9DE4  /* Cannon Point LP 4 (iTouch) */
+#define MEI_DEV_ID_CNP_LP_3   0x9DE4  /* Cannon Point LP 3 (iTouch) */
 #define MEI_DEV_ID_CNP_H      0xA360  /* Cannon Point H */
-#define MEI_DEV_ID_CNP_H_4    0xA364  /* Cannon Point H 4 (iTouch) */
+#define MEI_DEV_ID_CNP_H_3    0xA364  /* Cannon Point H 3 (iTouch) */
 
 #define MEI_DEV_ID_CMP_LP     0x02e0  /* Comet Point LP */
 #define MEI_DEV_ID_CMP_LP_3   0x02e4  /* Comet Point LP 3 (iTouch) */
@@ -87,6 +87,8 @@
 #define MEI_DEV_ID_CMP_H      0x06e0  /* Comet Lake H */
 #define MEI_DEV_ID_CMP_H_3    0x06e4  /* Comet Lake H 3 (iTouch) */
 
+#define MEI_DEV_ID_CDF        0x18D3  /* Cedar Fork */
+
 #define MEI_DEV_ID_ICP_LP     0x34E0  /* Ice Lake Point LP */
 
 #define MEI_DEV_ID_JSP_N      0x4DE0  /* Jasper Lake Point N */
diff --git a/drivers/misc/mei/hw.h b/drivers/misc/mei/hw.h
index d025a5f..b1a8d5e 100644
--- a/drivers/misc/mei/hw.h
+++ b/drivers/misc/mei/hw.h
@@ -209,11 +209,14 @@ struct mei_msg_hdr {
 	u32 extension[0];
 } __packed;
 
+/* The length is up to 9 bits */
+#define MEI_MSG_MAX_LEN_MASK GENMASK(9, 0)
+
 #define MEI_MSG_HDR_MAX 2
 
 struct mei_bus_message {
 	u8 hbm_cmd;
-	u8 data[0];
+	u8 data[];
 } __packed;
 
 /**
diff --git a/drivers/misc/mei/mei_dev.h b/drivers/misc/mei/mei_dev.h
index 76f8ff5..3a29db0 100644
--- a/drivers/misc/mei/mei_dev.h
+++ b/drivers/misc/mei/mei_dev.h
@@ -533,7 +533,7 @@ struct mei_device {
 #endif /* CONFIG_DEBUG_FS */
 
 	const struct mei_hw_ops *ops;
-	char hw[0] __aligned(sizeof(void *));
+	char hw[] __aligned(sizeof(void *));
 };
 
 static inline unsigned long mei_secs_to_jiffies(unsigned long sec)
diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c
index 2711451b..3d21c38 100644
--- a/drivers/misc/mei/pci-me.c
+++ b/drivers/misc/mei/pci-me.c
@@ -1,25 +1,16 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (c) 2003-2019, Intel Corporation. All rights reserved.
+ * Copyright (c) 2003-2020, Intel Corporation. All rights reserved.
  * Intel Management Engine Interface (Intel MEI) Linux driver
  */
 
 #include <linux/module.h>
-#include <linux/moduleparam.h>
 #include <linux/kernel.h>
 #include <linux/device.h>
-#include <linux/fs.h>
 #include <linux/errno.h>
 #include <linux/types.h>
-#include <linux/fcntl.h>
 #include <linux/pci.h>
-#include <linux/poll.h>
-#include <linux/ioctl.h>
-#include <linux/cdev.h>
 #include <linux/sched.h>
-#include <linux/uuid.h>
-#include <linux/compat.h>
-#include <linux/jiffies.h>
 #include <linux/interrupt.h>
 
 #include <linux/pm_domain.h>
@@ -92,9 +83,9 @@ static const struct pci_device_id mei_me_pci_tbl[] = {
 	{MEI_PCI_DEVICE(MEI_DEV_ID_KBP_2, MEI_ME_PCH8_CFG)},
 
 	{MEI_PCI_DEVICE(MEI_DEV_ID_CNP_LP, MEI_ME_PCH12_CFG)},
-	{MEI_PCI_DEVICE(MEI_DEV_ID_CNP_LP_4, MEI_ME_PCH8_CFG)},
+	{MEI_PCI_DEVICE(MEI_DEV_ID_CNP_LP_3, MEI_ME_PCH8_CFG)},
 	{MEI_PCI_DEVICE(MEI_DEV_ID_CNP_H, MEI_ME_PCH12_CFG)},
-	{MEI_PCI_DEVICE(MEI_DEV_ID_CNP_H_4, MEI_ME_PCH8_CFG)},
+	{MEI_PCI_DEVICE(MEI_DEV_ID_CNP_H_3, MEI_ME_PCH8_CFG)},
 
 	{MEI_PCI_DEVICE(MEI_DEV_ID_CMP_LP, MEI_ME_PCH12_CFG)},
 	{MEI_PCI_DEVICE(MEI_DEV_ID_CMP_LP_3, MEI_ME_PCH8_CFG)},
@@ -111,6 +102,8 @@ static const struct pci_device_id mei_me_pci_tbl[] = {
 	{MEI_PCI_DEVICE(MEI_DEV_ID_MCC, MEI_ME_PCH15_CFG)},
 	{MEI_PCI_DEVICE(MEI_DEV_ID_MCC_4, MEI_ME_PCH8_CFG)},
 
+	{MEI_PCI_DEVICE(MEI_DEV_ID_CDF, MEI_ME_PCH8_CFG)},
+
 	/* required last entry */
 	{0, }
 };
diff --git a/drivers/misc/mei/pci-txe.c b/drivers/misc/mei/pci-txe.c
index f1c16a5..beacf2a 100644
--- a/drivers/misc/mei/pci-txe.c
+++ b/drivers/misc/mei/pci-txe.c
@@ -1,20 +1,17 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (c) 2013-2017, Intel Corporation. All rights reserved.
+ * Copyright (c) 2013-2020, Intel Corporation. All rights reserved.
  * Intel Management Engine Interface (Intel MEI) Linux driver
  */
 
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/device.h>
-#include <linux/fs.h>
 #include <linux/errno.h>
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/sched.h>
-#include <linux/uuid.h>
-#include <linux/jiffies.h>
 #include <linux/interrupt.h>
 #include <linux/workqueue.h>
 #include <linux/pm_domain.h>
diff --git a/drivers/misc/mic/Kconfig b/drivers/misc/mic/Kconfig
index b6841ba..8f201d0 100644
--- a/drivers/misc/mic/Kconfig
+++ b/drivers/misc/mic/Kconfig
@@ -133,8 +133,4 @@
 	  OS and tools for MIC to use with this driver are available from
 	  <http://software.intel.com/en-us/mic-developer>.
 
-if VOP
-source "drivers/vhost/Kconfig.vringh"
-endif
-
 endmenu
diff --git a/drivers/misc/mic/host/mic_boot.c b/drivers/misc/mic/host/mic_boot.c
index 4f2d921..fb5b398 100644
--- a/drivers/misc/mic/host/mic_boot.c
+++ b/drivers/misc/mic/host/mic_boot.c
@@ -137,7 +137,7 @@ static void *__mic_dma_alloc(struct device *dev, size_t size,
 	struct scif_hw_dev *scdev = dev_get_drvdata(dev);
 	struct mic_device *mdev = scdev_to_mdev(scdev);
 	dma_addr_t tmp;
-	void *va = kmalloc(size, gfp | __GFP_ZERO);
+	void *va = kzalloc(size, gfp);
 
 	if (va) {
 		tmp = mic_map_single(mdev, va, size);
diff --git a/drivers/misc/mic/host/mic_x100.c b/drivers/misc/mic/host/mic_x100.c
index a774331..d18cda9 100644
--- a/drivers/misc/mic/host/mic_x100.c
+++ b/drivers/misc/mic/host/mic_x100.c
@@ -350,10 +350,10 @@ mic_x100_load_command_line(struct mic_device *mdev, const struct firmware *fw)
 	if (!buf)
 		return -ENOMEM;
 
-	len += snprintf(buf, CMDLINE_SIZE - len,
+	len += scnprintf(buf, CMDLINE_SIZE - len,
 		" mem=%dM", boot_mem);
 	if (mdev->cosm_dev->cmdline)
-		snprintf(buf + len, CMDLINE_SIZE - len, " %s",
+		scnprintf(buf + len, CMDLINE_SIZE - len, " %s",
 			 mdev->cosm_dev->cmdline);
 	memcpy_toio(cmd_line_va, buf, strlen(buf) + 1);
 	kfree(buf);
diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c
index a5e3170..ef5a1af 100644
--- a/drivers/misc/pci_endpoint_test.c
+++ b/drivers/misc/pci_endpoint_test.c
@@ -17,6 +17,7 @@
 #include <linux/mutex.h>
 #include <linux/random.h>
 #include <linux/slab.h>
+#include <linux/uaccess.h>
 #include <linux/pci.h>
 #include <linux/pci_ids.h>
 
@@ -64,6 +65,9 @@
 #define PCI_ENDPOINT_TEST_IRQ_TYPE		0x24
 #define PCI_ENDPOINT_TEST_IRQ_NUMBER		0x28
 
+#define PCI_ENDPOINT_TEST_FLAGS			0x2c
+#define FLAG_USE_DMA				BIT(0)
+
 #define PCI_DEVICE_ID_TI_AM654			0xb00c
 
 #define is_am654_pci_dev(pdev)		\
@@ -98,11 +102,13 @@ struct pci_endpoint_test {
 	struct completion irq_raised;
 	int		last_irq;
 	int		num_irqs;
+	int		irq_type;
 	/* mutex to protect the ioctls */
 	struct mutex	mutex;
 	struct miscdevice miscdev;
 	enum pci_barno test_reg_bar;
 	size_t alignment;
+	const char *name;
 };
 
 struct pci_endpoint_test_data {
@@ -157,6 +163,7 @@ static void pci_endpoint_test_free_irq_vectors(struct pci_endpoint_test *test)
 	struct pci_dev *pdev = test->pdev;
 
 	pci_free_irq_vectors(pdev);
+	test->irq_type = IRQ_TYPE_UNDEFINED;
 }
 
 static bool pci_endpoint_test_alloc_irq_vectors(struct pci_endpoint_test *test,
@@ -191,6 +198,8 @@ static bool pci_endpoint_test_alloc_irq_vectors(struct pci_endpoint_test *test,
 		irq = 0;
 		res = false;
 	}
+
+	test->irq_type = type;
 	test->num_irqs = irq;
 
 	return res;
@@ -218,7 +227,7 @@ static bool pci_endpoint_test_request_irq(struct pci_endpoint_test *test)
 	for (i = 0; i < test->num_irqs; i++) {
 		err = devm_request_irq(dev, pci_irq_vector(pdev, i),
 				       pci_endpoint_test_irqhandler,
-				       IRQF_SHARED, DRV_MODULE_NAME, test);
+				       IRQF_SHARED, test->name, test);
 		if (err)
 			goto fail;
 	}
@@ -315,11 +324,16 @@ static bool pci_endpoint_test_msi_irq(struct pci_endpoint_test *test,
 	return false;
 }
 
-static bool pci_endpoint_test_copy(struct pci_endpoint_test *test, size_t size)
+static bool pci_endpoint_test_copy(struct pci_endpoint_test *test,
+				   unsigned long arg)
 {
+	struct pci_endpoint_test_xfer_param param;
 	bool ret = false;
 	void *src_addr;
 	void *dst_addr;
+	u32 flags = 0;
+	bool use_dma;
+	size_t size;
 	dma_addr_t src_phys_addr;
 	dma_addr_t dst_phys_addr;
 	struct pci_dev *pdev = test->pdev;
@@ -330,25 +344,46 @@ static bool pci_endpoint_test_copy(struct pci_endpoint_test *test, size_t size)
 	dma_addr_t orig_dst_phys_addr;
 	size_t offset;
 	size_t alignment = test->alignment;
+	int irq_type = test->irq_type;
 	u32 src_crc32;
 	u32 dst_crc32;
+	int err;
 
+	err = copy_from_user(&param, (void __user *)arg, sizeof(param));
+	if (err) {
+		dev_err(dev, "Failed to get transfer param\n");
+		return false;
+	}
+
+	size = param.size;
 	if (size > SIZE_MAX - alignment)
 		goto err;
 
+	use_dma = !!(param.flags & PCITEST_FLAGS_USE_DMA);
+	if (use_dma)
+		flags |= FLAG_USE_DMA;
+
 	if (irq_type < IRQ_TYPE_LEGACY || irq_type > IRQ_TYPE_MSIX) {
 		dev_err(dev, "Invalid IRQ type option\n");
 		goto err;
 	}
 
-	orig_src_addr = dma_alloc_coherent(dev, size + alignment,
-					   &orig_src_phys_addr, GFP_KERNEL);
+	orig_src_addr = kzalloc(size + alignment, GFP_KERNEL);
 	if (!orig_src_addr) {
 		dev_err(dev, "Failed to allocate source buffer\n");
 		ret = false;
 		goto err;
 	}
 
+	get_random_bytes(orig_src_addr, size + alignment);
+	orig_src_phys_addr = dma_map_single(dev, orig_src_addr,
+					    size + alignment, DMA_TO_DEVICE);
+	if (dma_mapping_error(dev, orig_src_phys_addr)) {
+		dev_err(dev, "failed to map source buffer address\n");
+		ret = false;
+		goto err_src_phys_addr;
+	}
+
 	if (alignment && !IS_ALIGNED(orig_src_phys_addr, alignment)) {
 		src_phys_addr = PTR_ALIGN(orig_src_phys_addr, alignment);
 		offset = src_phys_addr - orig_src_phys_addr;
@@ -364,15 +399,21 @@ static bool pci_endpoint_test_copy(struct pci_endpoint_test *test, size_t size)
 	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_UPPER_SRC_ADDR,
 				 upper_32_bits(src_phys_addr));
 
-	get_random_bytes(src_addr, size);
 	src_crc32 = crc32_le(~0, src_addr, size);
 
-	orig_dst_addr = dma_alloc_coherent(dev, size + alignment,
-					   &orig_dst_phys_addr, GFP_KERNEL);
+	orig_dst_addr = kzalloc(size + alignment, GFP_KERNEL);
 	if (!orig_dst_addr) {
 		dev_err(dev, "Failed to allocate destination address\n");
 		ret = false;
-		goto err_orig_src_addr;
+		goto err_dst_addr;
+	}
+
+	orig_dst_phys_addr = dma_map_single(dev, orig_dst_addr,
+					    size + alignment, DMA_FROM_DEVICE);
+	if (dma_mapping_error(dev, orig_dst_phys_addr)) {
+		dev_err(dev, "failed to map destination buffer address\n");
+		ret = false;
+		goto err_dst_phys_addr;
 	}
 
 	if (alignment && !IS_ALIGNED(orig_dst_phys_addr, alignment)) {
@@ -392,6 +433,7 @@ static bool pci_endpoint_test_copy(struct pci_endpoint_test *test, size_t size)
 	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_SIZE,
 				 size);
 
+	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_FLAGS, flags);
 	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE, irq_type);
 	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_NUMBER, 1);
 	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND,
@@ -399,24 +441,34 @@ static bool pci_endpoint_test_copy(struct pci_endpoint_test *test, size_t size)
 
 	wait_for_completion(&test->irq_raised);
 
+	dma_unmap_single(dev, orig_dst_phys_addr, size + alignment,
+			 DMA_FROM_DEVICE);
+
 	dst_crc32 = crc32_le(~0, dst_addr, size);
 	if (dst_crc32 == src_crc32)
 		ret = true;
 
-	dma_free_coherent(dev, size + alignment, orig_dst_addr,
-			  orig_dst_phys_addr);
+err_dst_phys_addr:
+	kfree(orig_dst_addr);
 
-err_orig_src_addr:
-	dma_free_coherent(dev, size + alignment, orig_src_addr,
-			  orig_src_phys_addr);
+err_dst_addr:
+	dma_unmap_single(dev, orig_src_phys_addr, size + alignment,
+			 DMA_TO_DEVICE);
+
+err_src_phys_addr:
+	kfree(orig_src_addr);
 
 err:
 	return ret;
 }
 
-static bool pci_endpoint_test_write(struct pci_endpoint_test *test, size_t size)
+static bool pci_endpoint_test_write(struct pci_endpoint_test *test,
+				    unsigned long arg)
 {
+	struct pci_endpoint_test_xfer_param param;
 	bool ret = false;
+	u32 flags = 0;
+	bool use_dma;
 	u32 reg;
 	void *addr;
 	dma_addr_t phys_addr;
@@ -426,24 +478,47 @@ static bool pci_endpoint_test_write(struct pci_endpoint_test *test, size_t size)
 	dma_addr_t orig_phys_addr;
 	size_t offset;
 	size_t alignment = test->alignment;
+	int irq_type = test->irq_type;
+	size_t size;
 	u32 crc32;
+	int err;
 
+	err = copy_from_user(&param, (void __user *)arg, sizeof(param));
+	if (err != 0) {
+		dev_err(dev, "Failed to get transfer param\n");
+		return false;
+	}
+
+	size = param.size;
 	if (size > SIZE_MAX - alignment)
 		goto err;
 
+	use_dma = !!(param.flags & PCITEST_FLAGS_USE_DMA);
+	if (use_dma)
+		flags |= FLAG_USE_DMA;
+
 	if (irq_type < IRQ_TYPE_LEGACY || irq_type > IRQ_TYPE_MSIX) {
 		dev_err(dev, "Invalid IRQ type option\n");
 		goto err;
 	}
 
-	orig_addr = dma_alloc_coherent(dev, size + alignment, &orig_phys_addr,
-				       GFP_KERNEL);
+	orig_addr = kzalloc(size + alignment, GFP_KERNEL);
 	if (!orig_addr) {
 		dev_err(dev, "Failed to allocate address\n");
 		ret = false;
 		goto err;
 	}
 
+	get_random_bytes(orig_addr, size + alignment);
+
+	orig_phys_addr = dma_map_single(dev, orig_addr, size + alignment,
+					DMA_TO_DEVICE);
+	if (dma_mapping_error(dev, orig_phys_addr)) {
+		dev_err(dev, "failed to map source buffer address\n");
+		ret = false;
+		goto err_phys_addr;
+	}
+
 	if (alignment && !IS_ALIGNED(orig_phys_addr, alignment)) {
 		phys_addr =  PTR_ALIGN(orig_phys_addr, alignment);
 		offset = phys_addr - orig_phys_addr;
@@ -453,8 +528,6 @@ static bool pci_endpoint_test_write(struct pci_endpoint_test *test, size_t size)
 		addr = orig_addr;
 	}
 
-	get_random_bytes(addr, size);
-
 	crc32 = crc32_le(~0, addr, size);
 	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_CHECKSUM,
 				 crc32);
@@ -466,6 +539,7 @@ static bool pci_endpoint_test_write(struct pci_endpoint_test *test, size_t size)
 
 	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_SIZE, size);
 
+	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_FLAGS, flags);
 	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE, irq_type);
 	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_NUMBER, 1);
 	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND,
@@ -477,15 +551,24 @@ static bool pci_endpoint_test_write(struct pci_endpoint_test *test, size_t size)
 	if (reg & STATUS_READ_SUCCESS)
 		ret = true;
 
-	dma_free_coherent(dev, size + alignment, orig_addr, orig_phys_addr);
+	dma_unmap_single(dev, orig_phys_addr, size + alignment,
+			 DMA_TO_DEVICE);
+
+err_phys_addr:
+	kfree(orig_addr);
 
 err:
 	return ret;
 }
 
-static bool pci_endpoint_test_read(struct pci_endpoint_test *test, size_t size)
+static bool pci_endpoint_test_read(struct pci_endpoint_test *test,
+				   unsigned long arg)
 {
+	struct pci_endpoint_test_xfer_param param;
 	bool ret = false;
+	u32 flags = 0;
+	bool use_dma;
+	size_t size;
 	void *addr;
 	dma_addr_t phys_addr;
 	struct pci_dev *pdev = test->pdev;
@@ -494,24 +577,44 @@ static bool pci_endpoint_test_read(struct pci_endpoint_test *test, size_t size)
 	dma_addr_t orig_phys_addr;
 	size_t offset;
 	size_t alignment = test->alignment;
+	int irq_type = test->irq_type;
 	u32 crc32;
+	int err;
 
+	err = copy_from_user(&param, (void __user *)arg, sizeof(param));
+	if (err) {
+		dev_err(dev, "Failed to get transfer param\n");
+		return false;
+	}
+
+	size = param.size;
 	if (size > SIZE_MAX - alignment)
 		goto err;
 
+	use_dma = !!(param.flags & PCITEST_FLAGS_USE_DMA);
+	if (use_dma)
+		flags |= FLAG_USE_DMA;
+
 	if (irq_type < IRQ_TYPE_LEGACY || irq_type > IRQ_TYPE_MSIX) {
 		dev_err(dev, "Invalid IRQ type option\n");
 		goto err;
 	}
 
-	orig_addr = dma_alloc_coherent(dev, size + alignment, &orig_phys_addr,
-				       GFP_KERNEL);
+	orig_addr = kzalloc(size + alignment, GFP_KERNEL);
 	if (!orig_addr) {
 		dev_err(dev, "Failed to allocate destination address\n");
 		ret = false;
 		goto err;
 	}
 
+	orig_phys_addr = dma_map_single(dev, orig_addr, size + alignment,
+					DMA_FROM_DEVICE);
+	if (dma_mapping_error(dev, orig_phys_addr)) {
+		dev_err(dev, "failed to map source buffer address\n");
+		ret = false;
+		goto err_phys_addr;
+	}
+
 	if (alignment && !IS_ALIGNED(orig_phys_addr, alignment)) {
 		phys_addr = PTR_ALIGN(orig_phys_addr, alignment);
 		offset = phys_addr - orig_phys_addr;
@@ -528,6 +631,7 @@ static bool pci_endpoint_test_read(struct pci_endpoint_test *test, size_t size)
 
 	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_SIZE, size);
 
+	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_FLAGS, flags);
 	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE, irq_type);
 	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_NUMBER, 1);
 	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND,
@@ -535,15 +639,26 @@ static bool pci_endpoint_test_read(struct pci_endpoint_test *test, size_t size)
 
 	wait_for_completion(&test->irq_raised);
 
+	dma_unmap_single(dev, orig_phys_addr, size + alignment,
+			 DMA_FROM_DEVICE);
+
 	crc32 = crc32_le(~0, addr, size);
 	if (crc32 == pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_CHECKSUM))
 		ret = true;
 
-	dma_free_coherent(dev, size + alignment, orig_addr, orig_phys_addr);
+err_phys_addr:
+	kfree(orig_addr);
 err:
 	return ret;
 }
 
+static bool pci_endpoint_test_clear_irq(struct pci_endpoint_test *test)
+{
+	pci_endpoint_test_release_irq(test);
+	pci_endpoint_test_free_irq_vectors(test);
+	return true;
+}
+
 static bool pci_endpoint_test_set_irq(struct pci_endpoint_test *test,
 				      int req_irq_type)
 {
@@ -555,7 +670,7 @@ static bool pci_endpoint_test_set_irq(struct pci_endpoint_test *test,
 		return false;
 	}
 
-	if (irq_type == req_irq_type)
+	if (test->irq_type == req_irq_type)
 		return true;
 
 	pci_endpoint_test_release_irq(test);
@@ -567,12 +682,10 @@ static bool pci_endpoint_test_set_irq(struct pci_endpoint_test *test,
 	if (!pci_endpoint_test_request_irq(test))
 		goto err;
 
-	irq_type = req_irq_type;
 	return true;
 
 err:
 	pci_endpoint_test_free_irq_vectors(test);
-	irq_type = IRQ_TYPE_UNDEFINED;
 	return false;
 }
 
@@ -616,6 +729,9 @@ static long pci_endpoint_test_ioctl(struct file *file, unsigned int cmd,
 	case PCITEST_GET_IRQTYPE:
 		ret = irq_type;
 		break;
+	case PCITEST_CLEAR_IRQ:
+		ret = pci_endpoint_test_clear_irq(test);
+		break;
 	}
 
 ret:
@@ -633,7 +749,7 @@ static int pci_endpoint_test_probe(struct pci_dev *pdev,
 {
 	int err;
 	int id;
-	char name[20];
+	char name[24];
 	enum pci_barno bar;
 	void __iomem *base;
 	struct device *dev = &pdev->dev;
@@ -652,6 +768,7 @@ static int pci_endpoint_test_probe(struct pci_dev *pdev,
 	test->test_reg_bar = 0;
 	test->alignment = 0;
 	test->pdev = pdev;
+	test->irq_type = IRQ_TYPE_UNDEFINED;
 
 	if (no_msi)
 		irq_type = IRQ_TYPE_LEGACY;
@@ -667,6 +784,12 @@ static int pci_endpoint_test_probe(struct pci_dev *pdev,
 	init_completion(&test->irq_raised);
 	mutex_init(&test->mutex);
 
+	if ((dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(48)) != 0) &&
+	    dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)) != 0) {
+		dev_err(dev, "Cannot set DMA mask\n");
+		return -EINVAL;
+	}
+
 	err = pci_enable_device(pdev);
 	if (err) {
 		dev_err(dev, "Cannot enable PCI device\n");
@@ -684,9 +807,6 @@ static int pci_endpoint_test_probe(struct pci_dev *pdev,
 	if (!pci_endpoint_test_alloc_irq_vectors(test, irq_type))
 		goto err_disable_irq;
 
-	if (!pci_endpoint_test_request_irq(test))
-		goto err_disable_irq;
-
 	for (bar = 0; bar < PCI_STD_NUM_BARS; bar++) {
 		if (pci_resource_flags(pdev, bar) & IORESOURCE_MEM) {
 			base = pci_ioremap_bar(pdev, bar);
@@ -716,12 +836,21 @@ static int pci_endpoint_test_probe(struct pci_dev *pdev,
 	}
 
 	snprintf(name, sizeof(name), DRV_MODULE_NAME ".%d", id);
+	test->name = kstrdup(name, GFP_KERNEL);
+	if (!test->name) {
+		err = -ENOMEM;
+		goto err_ida_remove;
+	}
+
+	if (!pci_endpoint_test_request_irq(test))
+		goto err_kfree_test_name;
+
 	misc_device = &test->miscdev;
 	misc_device->minor = MISC_DYNAMIC_MINOR;
 	misc_device->name = kstrdup(name, GFP_KERNEL);
 	if (!misc_device->name) {
 		err = -ENOMEM;
-		goto err_ida_remove;
+		goto err_release_irq;
 	}
 	misc_device->fops = &pci_endpoint_test_fops,
 
@@ -736,6 +865,12 @@ static int pci_endpoint_test_probe(struct pci_dev *pdev,
 err_kfree_name:
 	kfree(misc_device->name);
 
+err_release_irq:
+	pci_endpoint_test_release_irq(test);
+
+err_kfree_test_name:
+	kfree(test->name);
+
 err_ida_remove:
 	ida_simple_remove(&pci_endpoint_test_ida, id);
 
@@ -744,7 +879,6 @@ static int pci_endpoint_test_probe(struct pci_dev *pdev,
 		if (test->bar[bar])
 			pci_iounmap(pdev, test->bar[bar]);
 	}
-	pci_endpoint_test_release_irq(test);
 
 err_disable_irq:
 	pci_endpoint_test_free_irq_vectors(test);
@@ -770,6 +904,7 @@ static void pci_endpoint_test_remove(struct pci_dev *pdev)
 
 	misc_deregister(&test->miscdev);
 	kfree(misc_device->name);
+	kfree(test->name);
 	ida_simple_remove(&pci_endpoint_test_ida, id);
 	for (bar = 0; bar < PCI_STD_NUM_BARS; bar++) {
 		if (test->bar[bar])
@@ -783,6 +918,12 @@ static void pci_endpoint_test_remove(struct pci_dev *pdev)
 	pci_disable_device(pdev);
 }
 
+static const struct pci_endpoint_test_data default_data = {
+	.test_reg_bar = BAR_0,
+	.alignment = SZ_4K,
+	.irq_type = IRQ_TYPE_MSI,
+};
+
 static const struct pci_endpoint_test_data am654_data = {
 	.test_reg_bar = BAR_2,
 	.alignment = SZ_64K,
@@ -790,8 +931,12 @@ static const struct pci_endpoint_test_data am654_data = {
 };
 
 static const struct pci_device_id pci_endpoint_test_tbl[] = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_DRA74x) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_DRA72x) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_DRA74x),
+	  .driver_data = (kernel_ulong_t)&default_data,
+	},
+	{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_DRA72x),
+	  .driver_data = (kernel_ulong_t)&default_data,
+	},
 	{ PCI_DEVICE(PCI_VENDOR_ID_FREESCALE, 0x81c0) },
 	{ PCI_DEVICE_DATA(SYNOPSYS, EDDA, NULL) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_AM654),
diff --git a/drivers/misc/sgi-gru/grulib.h b/drivers/misc/sgi-gru/grulib.h
index e77d1b1..85c1039 100644
--- a/drivers/misc/sgi-gru/grulib.h
+++ b/drivers/misc/sgi-gru/grulib.h
@@ -136,7 +136,7 @@ struct gru_dump_context_header {
 	pid_t		pid;
 	unsigned long	vaddr;
 	int		cch_locked;
-	unsigned long	data[0];
+	unsigned long	data[];
 };
 
 /*
diff --git a/drivers/misc/sgi-gru/grutables.h b/drivers/misc/sgi-gru/grutables.h
index a7e44b2..5ce8f30 100644
--- a/drivers/misc/sgi-gru/grutables.h
+++ b/drivers/misc/sgi-gru/grutables.h
@@ -372,7 +372,7 @@ struct gru_thread_state {
 	int			ts_data_valid;	/* Indicates if ts_gdata has
 						   valid data */
 	struct gru_gseg_statistics ustats;	/* User statistics */
-	unsigned long		ts_gdata[0];	/* save area for GRU data (CB,
+	unsigned long		ts_gdata[];	/* save area for GRU data (CB,
 						   DS, CBE) */
 };
 
diff --git a/drivers/misc/vexpress-syscfg.c b/drivers/misc/vexpress-syscfg.c
index 058fcd7..a431787 100644
--- a/drivers/misc/vexpress-syscfg.c
+++ b/drivers/misc/vexpress-syscfg.c
@@ -42,7 +42,7 @@ struct vexpress_syscfg_func {
 	struct vexpress_syscfg *syscfg;
 	struct regmap *regmap;
 	int num_templates;
-	u32 template[0]; /* Keep it last! */
+	u32 template[]; /* Keep it last! */
 };
 
 
diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index 00a7948..142c0f9 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -834,7 +834,7 @@ static int chip_ready (struct map_info *map, struct flchip *chip, unsigned long
 			/* Someone else might have been playing with it. */
 			return -EAGAIN;
 		}
-		/* Fall through */
+		fallthrough;
 	case FL_READY:
 	case FL_CFI_QUERY:
 	case FL_JEDEC_QUERY:
@@ -907,7 +907,7 @@ static int chip_ready (struct map_info *map, struct flchip *chip, unsigned long
 		/* Only if there's no operation suspended... */
 		if (mode == FL_READY && chip->oldstate == FL_READY)
 			return 0;
-		/* Fall through */
+		fallthrough;
 	default:
 	sleep:
 		set_current_state(TASK_UNINTERRUPTIBLE);
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index 04b383b..a1f3e10 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -966,8 +966,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr
 		/* Only if there's no operation suspended... */
 		if (mode == FL_READY && chip->oldstate == FL_READY)
 			return 0;
-		/* fall through */
-
+		fallthrough;
 	default:
 	sleep:
 		set_current_state(TASK_UNINTERRUPTIBLE);
@@ -2935,7 +2934,7 @@ static void cfi_amdstd_sync (struct mtd_info *mtd)
 			 * as the whole point is that nobody can do anything
 			 * with the chip now anyway.
 			 */
-			/* fall through */
+			fallthrough;
 		case FL_SYNCING:
 			mutex_unlock(&chip->mutex);
 			break;
diff --git a/drivers/mtd/chips/cfi_cmdset_0020.c b/drivers/mtd/chips/cfi_cmdset_0020.c
index 54edae6..270322b 100644
--- a/drivers/mtd/chips/cfi_cmdset_0020.c
+++ b/drivers/mtd/chips/cfi_cmdset_0020.c
@@ -324,8 +324,7 @@ static inline int do_read_onechip(struct map_info *map, struct flchip *chip, lof
 	case FL_JEDEC_QUERY:
 		map_write(map, CMD(0x70), cmd_addr);
 		chip->state = FL_STATUS;
-		/* Fall through */
-
+		fallthrough;
 	case FL_STATUS:
 		status = map_read(map, cmd_addr);
 		if (map_word_andequal(map, status, status_OK, status_OK)) {
@@ -462,8 +461,7 @@ static int do_write_buffer(struct map_info *map, struct flchip *chip,
 #ifdef DEBUG_CFI_FEATURES
 	printk("%s: 1 status[%x]\n", __func__, map_read(map, cmd_adr));
 #endif
-		/* Fall through */
-
+		fallthrough;
 	case FL_STATUS:
 		status = map_read(map, cmd_adr);
 		if (map_word_andequal(map, status, status_OK, status_OK))
@@ -756,8 +754,7 @@ static inline int do_erase_oneblock(struct map_info *map, struct flchip *chip, u
 	case FL_READY:
 		map_write(map, CMD(0x70), adr);
 		chip->state = FL_STATUS;
-		/* Fall through */
-
+		fallthrough;
 	case FL_STATUS:
 		status = map_read(map, adr);
 		if (map_word_andequal(map, status, status_OK, status_OK))
@@ -998,7 +995,7 @@ static void cfi_staa_sync (struct mtd_info *mtd)
 			 * as the whole point is that nobody can do anything
 			 * with the chip now anyway.
 			 */
-			/* Fall through */
+			fallthrough;
 		case FL_SYNCING:
 			mutex_unlock(&chip->mutex);
 			break;
@@ -1054,8 +1051,7 @@ static inline int do_lock_oneblock(struct map_info *map, struct flchip *chip, un
 	case FL_READY:
 		map_write(map, CMD(0x70), adr);
 		chip->state = FL_STATUS;
-		/* Fall through */
-
+		fallthrough;
 	case FL_STATUS:
 		status = map_read(map, adr);
 		if (map_word_andequal(map, status, status_OK, status_OK))
@@ -1201,8 +1197,7 @@ static inline int do_unlock_oneblock(struct map_info *map, struct flchip *chip,
 	case FL_READY:
 		map_write(map, CMD(0x70), adr);
 		chip->state = FL_STATUS;
-		/* Fall through */
-
+		fallthrough;
 	case FL_STATUS:
 		status = map_read(map, adr);
 		if (map_word_andequal(map, status, status_OK, status_OK))
diff --git a/drivers/mtd/chips/cfi_util.c b/drivers/mtd/chips/cfi_util.c
index e2d4db0..99b7986 100644
--- a/drivers/mtd/chips/cfi_util.c
+++ b/drivers/mtd/chips/cfi_util.c
@@ -109,13 +109,13 @@ map_word cfi_build_cmd(u_long cmd, struct map_info *map, struct cfi_private *cfi
 	case 8:
 		onecmd |= (onecmd << (chip_mode * 32));
 #endif
-		/* fall through */
+		fallthrough;
 	case 4:
 		onecmd |= (onecmd << (chip_mode * 16));
-		/* fall through */
+		fallthrough;
 	case 2:
 		onecmd |= (onecmd << (chip_mode * 8));
-		/* fall through */
+		fallthrough;
 	case 1:
 		;
 	}
@@ -165,13 +165,13 @@ unsigned long cfi_merge_status(map_word val, struct map_info *map,
 	case 8:
 		res |= (onestat >> (chip_mode * 32));
 #endif
-		/* fall through */
+		fallthrough;
 	case 4:
 		res |= (onestat >> (chip_mode * 16));
-		/* fall through */
+		fallthrough;
 	case 2:
 		res |= (onestat >> (chip_mode * 8));
-		/* fall through */
+		fallthrough;
 	case 1:
 		;
 	}
diff --git a/drivers/mtd/devices/block2mtd.c b/drivers/mtd/devices/block2mtd.c
index 36aa082..c08721b 100644
--- a/drivers/mtd/devices/block2mtd.c
+++ b/drivers/mtd/devices/block2mtd.c
@@ -329,10 +329,10 @@ static int ustrtoul(const char *cp, char **endp, unsigned int base)
 	switch (**endp) {
 	case 'G' :
 		result *= 1024;
-		/* fall through */
+		fallthrough;
 	case 'M':
 		result *= 1024;
-		/* fall through */
+		fallthrough;
 	case 'K':
 	case 'k':
 		result *= 1024;
diff --git a/drivers/mtd/devices/phram.c b/drivers/mtd/devices/phram.c
index 931e5c2..087b5e8 100644
--- a/drivers/mtd/devices/phram.c
+++ b/drivers/mtd/devices/phram.c
@@ -148,10 +148,10 @@ static int parse_num64(uint64_t *num64, char *token)
 			switch (token[len - 2]) {
 			case 'G':
 				shift += 10;
-				/* fall through */
+				fallthrough;
 			case 'M':
 				shift += 10;
-				/* fall through */
+				fallthrough;
 			case 'k':
 				shift += 10;
 				token[len - 2] = 0;
@@ -243,22 +243,25 @@ static int phram_setup(const char *val)
 
 	ret = parse_num64(&start, token[1]);
 	if (ret) {
-		kfree(name);
 		parse_err("illegal start address\n");
+		goto error;
 	}
 
 	ret = parse_num64(&len, token[2]);
 	if (ret) {
-		kfree(name);
 		parse_err("illegal device length\n");
+		goto error;
 	}
 
 	ret = register_device(name, start, len);
-	if (!ret)
-		pr_info("%s device: %#llx at %#llx\n", name, len, start);
-	else
-		kfree(name);
+	if (ret)
+		goto error;
 
+	pr_info("%s device: %#llx at %#llx\n", name, len, start);
+	return 0;
+
+error:
+	kfree(name);
 	return ret;
 }
 
diff --git a/drivers/mtd/hyperbus/hbmc-am654.c b/drivers/mtd/hyperbus/hbmc-am654.c
index 08d543b..f350a080 100644
--- a/drivers/mtd/hyperbus/hbmc-am654.c
+++ b/drivers/mtd/hyperbus/hbmc-am654.c
@@ -11,6 +11,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mux/consumer.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/types.h>
@@ -57,8 +58,10 @@ static const struct hyperbus_ops am654_hbmc_ops = {
 
 static int am654_hbmc_probe(struct platform_device *pdev)
 {
+	struct device_node *np = pdev->dev.of_node;
 	struct device *dev = &pdev->dev;
 	struct am654_hbmc_priv *priv;
+	struct resource res;
 	int ret;
 
 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
@@ -67,6 +70,10 @@ static int am654_hbmc_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, priv);
 
+	ret = of_address_to_resource(np, 0, &res);
+	if (ret)
+		return ret;
+
 	if (of_property_read_bool(dev->of_node, "mux-controls")) {
 		struct mux_control *control = devm_mux_control_get(dev, NULL);
 
@@ -88,6 +95,11 @@ static int am654_hbmc_probe(struct platform_device *pdev)
 		goto disable_pm;
 	}
 
+	priv->hbdev.map.size = resource_size(&res);
+	priv->hbdev.map.virt = devm_ioremap_resource(dev, &res);
+	if (IS_ERR(priv->hbdev.map.virt))
+		return PTR_ERR(priv->hbdev.map.virt);
+
 	priv->ctlr.dev = dev;
 	priv->ctlr.ops = &am654_hbmc_ops;
 	priv->hbdev.ctlr = &priv->ctlr;
diff --git a/drivers/mtd/hyperbus/hyperbus-core.c b/drivers/mtd/hyperbus/hyperbus-core.c
index 6af9ea3..32685e8 100644
--- a/drivers/mtd/hyperbus/hyperbus-core.c
+++ b/drivers/mtd/hyperbus/hyperbus-core.c
@@ -10,7 +10,6 @@
 #include <linux/mtd/map.h>
 #include <linux/mtd/mtd.h>
 #include <linux/of.h>
-#include <linux/of_address.h>
 #include <linux/types.h>
 
 static struct hyperbus_device *map_to_hbdev(struct map_info *map)
@@ -62,7 +61,6 @@ int hyperbus_register_device(struct hyperbus_device *hbdev)
 	struct hyperbus_ctlr *ctlr;
 	struct device_node *np;
 	struct map_info *map;
-	struct resource res;
 	struct device *dev;
 	int ret;
 
@@ -73,22 +71,15 @@ int hyperbus_register_device(struct hyperbus_device *hbdev)
 
 	np = hbdev->np;
 	ctlr = hbdev->ctlr;
-	if (!of_device_is_compatible(np, "cypress,hyperflash"))
+	if (!of_device_is_compatible(np, "cypress,hyperflash")) {
+		dev_err(ctlr->dev, "\"cypress,hyperflash\" compatible missing\n");
 		return -ENODEV;
+	}
 
 	hbdev->memtype = HYPERFLASH;
 
-	ret = of_address_to_resource(np, 0, &res);
-	if (ret)
-		return ret;
-
 	dev = ctlr->dev;
 	map = &hbdev->map;
-	map->size = resource_size(&res);
-	map->virt = devm_ioremap_resource(dev, &res);
-	if (IS_ERR(map->virt))
-		return PTR_ERR(map->virt);
-
 	map->name = dev_name(dev);
 	map->bankwidth = 2;
 	map->device_node = np;
diff --git a/drivers/mtd/inftlmount.c b/drivers/mtd/inftlmount.c
index 54b176d..af16d34 100644
--- a/drivers/mtd/inftlmount.c
+++ b/drivers/mtd/inftlmount.c
@@ -130,7 +130,7 @@ static int find_boot_record(struct INFTLrecord *inftl)
 			 "    NoOfBootImageBlocks   = %d\n"
 			 "    NoOfBinaryPartitions  = %d\n"
 			 "    NoOfBDTLPartitions    = %d\n"
-			 "    BlockMultiplerBits    = %d\n"
+			 "    BlockMultiplierBits   = %d\n"
 			 "    FormatFlgs            = %d\n"
 			 "    OsakVersion           = 0x%x\n"
 			 "    PercentUsed           = %d\n",
diff --git a/drivers/mtd/lpddr/lpddr_cmds.c b/drivers/mtd/lpddr/lpddr_cmds.c
index 1efc643..fb1cbc9 100644
--- a/drivers/mtd/lpddr/lpddr_cmds.c
+++ b/drivers/mtd/lpddr/lpddr_cmds.c
@@ -68,7 +68,6 @@ struct mtd_info *lpddr_cmdset(struct map_info *map)
 	shared = kmalloc_array(lpddr->numchips, sizeof(struct flchip_shared),
 						GFP_KERNEL);
 	if (!shared) {
-		kfree(lpddr);
 		kfree(mtd);
 		return NULL;
 	}
@@ -305,8 +304,7 @@ static int chip_ready(struct map_info *map, struct flchip *chip, int mode)
 		/* Only if there's no operation suspended... */
 		if (mode == FL_READY && chip->oldstate == FL_READY)
 			return 0;
-		/* fall through */
-
+		fallthrough;
 	default:
 sleep:
 		set_current_state(TASK_UNINTERRUPTIBLE);
diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c
index 47602af..d3d4e98 100644
--- a/drivers/mtd/maps/sa1100-flash.c
+++ b/drivers/mtd/maps/sa1100-flash.c
@@ -34,7 +34,7 @@ struct sa_subdev_info {
 struct sa_info {
 	struct mtd_info		*mtd;
 	int			num_subdev;
-	struct sa_subdev_info	subdev[0];
+	struct sa_subdev_info	subdev[];
 };
 
 static DEFINE_SPINLOCK(sa1100_vpp_lock);
@@ -81,8 +81,7 @@ static int sa1100_probe_subdev(struct sa_subdev_info *subdev, struct resource *r
 	default:
 		printk(KERN_WARNING "SA1100 flash: unknown base address "
 		       "0x%08lx, assuming CS0\n", phys);
-		/* Fall through */
-
+		fallthrough;
 	case SA1100_CS0_PHYS:
 		subdev->map.bankwidth = (MSC0 & MSC_RBW) ? 2 : 4;
 		break;
diff --git a/drivers/mtd/mtdblock.c b/drivers/mtd/mtdblock.c
index c06b532..078e0f6 100644
--- a/drivers/mtd/mtdblock.c
+++ b/drivers/mtd/mtdblock.c
@@ -294,12 +294,13 @@ static void mtdblock_release(struct mtd_blktrans_dev *mbd)
 static int mtdblock_flush(struct mtd_blktrans_dev *dev)
 {
 	struct mtdblk_dev *mtdblk = container_of(dev, struct mtdblk_dev, mbd);
+	int ret;
 
 	mutex_lock(&mtdblk->cache_mutex);
-	write_cached_data(mtdblk);
+	ret = write_cached_data(mtdblk);
 	mutex_unlock(&mtdblk->cache_mutex);
 	mtd_sync(dev->mtd);
-	return 0;
+	return ret;
 }
 
 static void mtdblock_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index b841008..c5935b2 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -349,6 +349,7 @@ static int mtdchar_writeoob(struct file *file, struct mtd_info *mtd,
 	uint64_t start, uint32_t length, void __user *ptr,
 	uint32_t __user *retp)
 {
+	struct mtd_info *master  = mtd_get_master(mtd);
 	struct mtd_file_info *mfi = file->private_data;
 	struct mtd_oob_ops ops = {};
 	uint32_t retlen;
@@ -360,7 +361,7 @@ static int mtdchar_writeoob(struct file *file, struct mtd_info *mtd,
 	if (length > 4096)
 		return -EINVAL;
 
-	if (!mtd->_write_oob)
+	if (!master->_write_oob)
 		return -EOPNOTSUPP;
 
 	ops.ooblen = length;
@@ -586,6 +587,7 @@ static int mtdchar_blkpg_ioctl(struct mtd_info *mtd,
 static int mtdchar_write_ioctl(struct mtd_info *mtd,
 		struct mtd_write_req __user *argp)
 {
+	struct mtd_info *master = mtd_get_master(mtd);
 	struct mtd_write_req req;
 	struct mtd_oob_ops ops = {};
 	const void __user *usr_data, *usr_oob;
@@ -597,9 +599,8 @@ static int mtdchar_write_ioctl(struct mtd_info *mtd,
 	usr_data = (const void __user *)(uintptr_t)req.usr_data;
 	usr_oob = (const void __user *)(uintptr_t)req.usr_oob;
 
-	if (!mtd->_write_oob)
+	if (!master->_write_oob)
 		return -EOPNOTSUPP;
-
 	ops.mode = req.mode;
 	ops.len = (size_t)req.len;
 	ops.ooblen = (size_t)req.ooblen;
@@ -635,6 +636,7 @@ static int mtdchar_ioctl(struct file *file, u_int cmd, u_long arg)
 {
 	struct mtd_file_info *mfi = file->private_data;
 	struct mtd_info *mtd = mfi->mtd;
+	struct mtd_info *master = mtd_get_master(mtd);
 	void __user *argp = (void __user *)arg;
 	int ret = 0;
 	struct mtd_info_user info;
@@ -824,7 +826,7 @@ static int mtdchar_ioctl(struct file *file, u_int cmd, u_long arg)
 	{
 		struct nand_oobinfo oi;
 
-		if (!mtd->ooblayout)
+		if (!master->ooblayout)
 			return -EOPNOTSUPP;
 
 		ret = get_oobinfo(mtd, &oi);
@@ -918,7 +920,7 @@ static int mtdchar_ioctl(struct file *file, u_int cmd, u_long arg)
 	{
 		struct nand_ecclayout_user *usrlay;
 
-		if (!mtd->ooblayout)
+		if (!master->ooblayout)
 			return -EOPNOTSUPP;
 
 		usrlay = kmalloc(sizeof(*usrlay), GFP_KERNEL);
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index 5fac435..2916674 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -456,13 +456,14 @@ static int mtd_reboot_notifier(struct notifier_block *n, unsigned long state,
 int mtd_wunit_to_pairing_info(struct mtd_info *mtd, int wunit,
 			      struct mtd_pairing_info *info)
 {
-	int npairs = mtd_wunit_per_eb(mtd) / mtd_pairing_groups(mtd);
+	struct mtd_info *master = mtd_get_master(mtd);
+	int npairs = mtd_wunit_per_eb(master) / mtd_pairing_groups(master);
 
 	if (wunit < 0 || wunit >= npairs)
 		return -EINVAL;
 
-	if (mtd->pairing && mtd->pairing->get_info)
-		return mtd->pairing->get_info(mtd, wunit, info);
+	if (master->pairing && master->pairing->get_info)
+		return master->pairing->get_info(master, wunit, info);
 
 	info->group = 0;
 	info->pair = wunit;
@@ -498,15 +499,16 @@ EXPORT_SYMBOL_GPL(mtd_wunit_to_pairing_info);
 int mtd_pairing_info_to_wunit(struct mtd_info *mtd,
 			      const struct mtd_pairing_info *info)
 {
-	int ngroups = mtd_pairing_groups(mtd);
-	int npairs = mtd_wunit_per_eb(mtd) / ngroups;
+	struct mtd_info *master = mtd_get_master(mtd);
+	int ngroups = mtd_pairing_groups(master);
+	int npairs = mtd_wunit_per_eb(master) / ngroups;
 
 	if (!info || info->pair < 0 || info->pair >= npairs ||
 	    info->group < 0 || info->group >= ngroups)
 		return -EINVAL;
 
-	if (mtd->pairing && mtd->pairing->get_wunit)
-		return mtd->pairing->get_wunit(mtd, info);
+	if (master->pairing && master->pairing->get_wunit)
+		return mtd->pairing->get_wunit(master, info);
 
 	return info->pair;
 }
@@ -524,10 +526,12 @@ EXPORT_SYMBOL_GPL(mtd_pairing_info_to_wunit);
  */
 int mtd_pairing_groups(struct mtd_info *mtd)
 {
-	if (!mtd->pairing || !mtd->pairing->ngroups)
+	struct mtd_info *master = mtd_get_master(mtd);
+
+	if (!master->pairing || !master->pairing->ngroups)
 		return 1;
 
-	return mtd->pairing->ngroups;
+	return master->pairing->ngroups;
 }
 EXPORT_SYMBOL_GPL(mtd_pairing_groups);
 
@@ -587,6 +591,7 @@ static int mtd_nvmem_add(struct mtd_info *mtd)
 
 int add_mtd_device(struct mtd_info *mtd)
 {
+	struct mtd_info *master = mtd_get_master(mtd);
 	struct mtd_notifier *not;
 	int i, error;
 
@@ -608,7 +613,7 @@ int add_mtd_device(struct mtd_info *mtd)
 		    (mtd->_read && mtd->_read_oob)))
 		return -EINVAL;
 
-	if (WARN_ON((!mtd->erasesize || !mtd->_erase) &&
+	if (WARN_ON((!mtd->erasesize || !master->_erase) &&
 		    !(mtd->flags & MTD_NO_ERASE)))
 		return -EINVAL;
 
@@ -765,7 +770,8 @@ static void mtd_set_dev_defaults(struct mtd_info *mtd)
 		pr_debug("mtd device won't show a device symlink in sysfs\n");
 	}
 
-	mtd->orig_flags = mtd->flags;
+	INIT_LIST_HEAD(&mtd->partitions);
+	mutex_init(&mtd->master.partitions_lock);
 }
 
 /**
@@ -971,20 +977,26 @@ EXPORT_SYMBOL_GPL(get_mtd_device);
 
 int __get_mtd_device(struct mtd_info *mtd)
 {
+	struct mtd_info *master = mtd_get_master(mtd);
 	int err;
 
-	if (!try_module_get(mtd->owner))
+	if (!try_module_get(master->owner))
 		return -ENODEV;
 
-	if (mtd->_get_device) {
-		err = mtd->_get_device(mtd);
+	if (master->_get_device) {
+		err = master->_get_device(mtd);
 
 		if (err) {
-			module_put(mtd->owner);
+			module_put(master->owner);
 			return err;
 		}
 	}
-	mtd->usecount++;
+
+	while (mtd->parent) {
+		mtd->usecount++;
+		mtd = mtd->parent;
+	}
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(__get_mtd_device);
@@ -1038,13 +1050,18 @@ EXPORT_SYMBOL_GPL(put_mtd_device);
 
 void __put_mtd_device(struct mtd_info *mtd)
 {
-	--mtd->usecount;
-	BUG_ON(mtd->usecount < 0);
+	struct mtd_info *master = mtd_get_master(mtd);
 
-	if (mtd->_put_device)
-		mtd->_put_device(mtd);
+	while (mtd->parent) {
+		--mtd->usecount;
+		BUG_ON(mtd->usecount < 0);
+		mtd = mtd->parent;
+	}
 
-	module_put(mtd->owner);
+	if (master->_put_device)
+		master->_put_device(master);
+
+	module_put(master->owner);
 }
 EXPORT_SYMBOL_GPL(__put_mtd_device);
 
@@ -1055,9 +1072,13 @@ EXPORT_SYMBOL_GPL(__put_mtd_device);
  */
 int mtd_erase(struct mtd_info *mtd, struct erase_info *instr)
 {
+	struct mtd_info *master = mtd_get_master(mtd);
+	u64 mst_ofs = mtd_get_master_ofs(mtd, 0);
+	int ret;
+
 	instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN;
 
-	if (!mtd->erasesize || !mtd->_erase)
+	if (!mtd->erasesize || !master->_erase)
 		return -ENOTSUPP;
 
 	if (instr->addr >= mtd->size || instr->len > mtd->size - instr->addr)
@@ -1069,7 +1090,14 @@ int mtd_erase(struct mtd_info *mtd, struct erase_info *instr)
 		return 0;
 
 	ledtrig_mtd_activity();
-	return mtd->_erase(mtd, instr);
+
+	instr->addr += mst_ofs;
+	ret = master->_erase(master, instr);
+	if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN)
+		instr->fail_addr -= mst_ofs;
+
+	instr->addr -= mst_ofs;
+	return ret;
 }
 EXPORT_SYMBOL_GPL(mtd_erase);
 
@@ -1079,30 +1107,36 @@ EXPORT_SYMBOL_GPL(mtd_erase);
 int mtd_point(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen,
 	      void **virt, resource_size_t *phys)
 {
+	struct mtd_info *master = mtd_get_master(mtd);
+
 	*retlen = 0;
 	*virt = NULL;
 	if (phys)
 		*phys = 0;
-	if (!mtd->_point)
+	if (!master->_point)
 		return -EOPNOTSUPP;
 	if (from < 0 || from >= mtd->size || len > mtd->size - from)
 		return -EINVAL;
 	if (!len)
 		return 0;
-	return mtd->_point(mtd, from, len, retlen, virt, phys);
+
+	from = mtd_get_master_ofs(mtd, from);
+	return master->_point(master, from, len, retlen, virt, phys);
 }
 EXPORT_SYMBOL_GPL(mtd_point);
 
 /* We probably shouldn't allow XIP if the unpoint isn't a NULL */
 int mtd_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
 {
-	if (!mtd->_unpoint)
+	struct mtd_info *master = mtd_get_master(mtd);
+
+	if (!master->_unpoint)
 		return -EOPNOTSUPP;
 	if (from < 0 || from >= mtd->size || len > mtd->size - from)
 		return -EINVAL;
 	if (!len)
 		return 0;
-	return mtd->_unpoint(mtd, from, len);
+	return master->_unpoint(master, mtd_get_master_ofs(mtd, from), len);
 }
 EXPORT_SYMBOL_GPL(mtd_unpoint);
 
@@ -1129,6 +1163,25 @@ unsigned long mtd_get_unmapped_area(struct mtd_info *mtd, unsigned long len,
 }
 EXPORT_SYMBOL_GPL(mtd_get_unmapped_area);
 
+static void mtd_update_ecc_stats(struct mtd_info *mtd, struct mtd_info *master,
+				 const struct mtd_ecc_stats *old_stats)
+{
+	struct mtd_ecc_stats diff;
+
+	if (master == mtd)
+		return;
+
+	diff = master->ecc_stats;
+	diff.failed -= old_stats->failed;
+	diff.corrected -= old_stats->corrected;
+
+	while (mtd->parent) {
+		mtd->ecc_stats.failed += diff.failed;
+		mtd->ecc_stats.corrected += diff.corrected;
+		mtd = mtd->parent;
+	}
+}
+
 int mtd_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen,
 	     u_char *buf)
 {
@@ -1171,8 +1224,10 @@ EXPORT_SYMBOL_GPL(mtd_write);
 int mtd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen,
 		    const u_char *buf)
 {
+	struct mtd_info *master = mtd_get_master(mtd);
+
 	*retlen = 0;
-	if (!mtd->_panic_write)
+	if (!master->_panic_write)
 		return -EOPNOTSUPP;
 	if (to < 0 || to >= mtd->size || len > mtd->size - to)
 		return -EINVAL;
@@ -1183,7 +1238,8 @@ int mtd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen,
 	if (!mtd->oops_panic_write)
 		mtd->oops_panic_write = true;
 
-	return mtd->_panic_write(mtd, to, len, retlen, buf);
+	return master->_panic_write(master, mtd_get_master_ofs(mtd, to), len,
+				    retlen, buf);
 }
 EXPORT_SYMBOL_GPL(mtd_panic_write);
 
@@ -1222,7 +1278,10 @@ static int mtd_check_oob_ops(struct mtd_info *mtd, loff_t offs,
 
 int mtd_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops)
 {
+	struct mtd_info *master = mtd_get_master(mtd);
+	struct mtd_ecc_stats old_stats = master->ecc_stats;
 	int ret_code;
+
 	ops->retlen = ops->oobretlen = 0;
 
 	ret_code = mtd_check_oob_ops(mtd, from, ops);
@@ -1232,14 +1291,17 @@ int mtd_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops)
 	ledtrig_mtd_activity();
 
 	/* Check the validity of a potential fallback on mtd->_read */
-	if (!mtd->_read_oob && (!mtd->_read || ops->oobbuf))
+	if (!master->_read_oob && (!master->_read || ops->oobbuf))
 		return -EOPNOTSUPP;
 
-	if (mtd->_read_oob)
-		ret_code = mtd->_read_oob(mtd, from, ops);
+	from = mtd_get_master_ofs(mtd, from);
+	if (master->_read_oob)
+		ret_code = master->_read_oob(master, from, ops);
 	else
-		ret_code = mtd->_read(mtd, from, ops->len, &ops->retlen,
-				      ops->datbuf);
+		ret_code = master->_read(master, from, ops->len, &ops->retlen,
+					 ops->datbuf);
+
+	mtd_update_ecc_stats(mtd, master, &old_stats);
 
 	/*
 	 * In cases where ops->datbuf != NULL, mtd->_read_oob() has semantics
@@ -1258,6 +1320,7 @@ EXPORT_SYMBOL_GPL(mtd_read_oob);
 int mtd_write_oob(struct mtd_info *mtd, loff_t to,
 				struct mtd_oob_ops *ops)
 {
+	struct mtd_info *master = mtd_get_master(mtd);
 	int ret;
 
 	ops->retlen = ops->oobretlen = 0;
@@ -1272,14 +1335,16 @@ int mtd_write_oob(struct mtd_info *mtd, loff_t to,
 	ledtrig_mtd_activity();
 
 	/* Check the validity of a potential fallback on mtd->_write */
-	if (!mtd->_write_oob && (!mtd->_write || ops->oobbuf))
+	if (!master->_write_oob && (!master->_write || ops->oobbuf))
 		return -EOPNOTSUPP;
 
-	if (mtd->_write_oob)
-		return mtd->_write_oob(mtd, to, ops);
+	to = mtd_get_master_ofs(mtd, to);
+
+	if (master->_write_oob)
+		return master->_write_oob(master, to, ops);
 	else
-		return mtd->_write(mtd, to, ops->len, &ops->retlen,
-				   ops->datbuf);
+		return master->_write(master, to, ops->len, &ops->retlen,
+				      ops->datbuf);
 }
 EXPORT_SYMBOL_GPL(mtd_write_oob);
 
@@ -1302,15 +1367,17 @@ EXPORT_SYMBOL_GPL(mtd_write_oob);
 int mtd_ooblayout_ecc(struct mtd_info *mtd, int section,
 		      struct mtd_oob_region *oobecc)
 {
+	struct mtd_info *master = mtd_get_master(mtd);
+
 	memset(oobecc, 0, sizeof(*oobecc));
 
-	if (!mtd || section < 0)
+	if (!master || section < 0)
 		return -EINVAL;
 
-	if (!mtd->ooblayout || !mtd->ooblayout->ecc)
+	if (!master->ooblayout || !master->ooblayout->ecc)
 		return -ENOTSUPP;
 
-	return mtd->ooblayout->ecc(mtd, section, oobecc);
+	return master->ooblayout->ecc(master, section, oobecc);
 }
 EXPORT_SYMBOL_GPL(mtd_ooblayout_ecc);
 
@@ -1334,15 +1401,17 @@ EXPORT_SYMBOL_GPL(mtd_ooblayout_ecc);
 int mtd_ooblayout_free(struct mtd_info *mtd, int section,
 		       struct mtd_oob_region *oobfree)
 {
+	struct mtd_info *master = mtd_get_master(mtd);
+
 	memset(oobfree, 0, sizeof(*oobfree));
 
-	if (!mtd || section < 0)
+	if (!master || section < 0)
 		return -EINVAL;
 
-	if (!mtd->ooblayout || !mtd->ooblayout->free)
+	if (!master->ooblayout || !master->ooblayout->free)
 		return -ENOTSUPP;
 
-	return mtd->ooblayout->free(mtd, section, oobfree);
+	return master->ooblayout->free(master, section, oobfree);
 }
 EXPORT_SYMBOL_GPL(mtd_ooblayout_free);
 
@@ -1651,60 +1720,69 @@ EXPORT_SYMBOL_GPL(mtd_ooblayout_count_eccbytes);
 int mtd_get_fact_prot_info(struct mtd_info *mtd, size_t len, size_t *retlen,
 			   struct otp_info *buf)
 {
-	if (!mtd->_get_fact_prot_info)
+	struct mtd_info *master = mtd_get_master(mtd);
+
+	if (!master->_get_fact_prot_info)
 		return -EOPNOTSUPP;
 	if (!len)
 		return 0;
-	return mtd->_get_fact_prot_info(mtd, len, retlen, buf);
+	return master->_get_fact_prot_info(master, len, retlen, buf);
 }
 EXPORT_SYMBOL_GPL(mtd_get_fact_prot_info);
 
 int mtd_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, size_t len,
 			   size_t *retlen, u_char *buf)
 {
+	struct mtd_info *master = mtd_get_master(mtd);
+
 	*retlen = 0;
-	if (!mtd->_read_fact_prot_reg)
+	if (!master->_read_fact_prot_reg)
 		return -EOPNOTSUPP;
 	if (!len)
 		return 0;
-	return mtd->_read_fact_prot_reg(mtd, from, len, retlen, buf);
+	return master->_read_fact_prot_reg(master, from, len, retlen, buf);
 }
 EXPORT_SYMBOL_GPL(mtd_read_fact_prot_reg);
 
 int mtd_get_user_prot_info(struct mtd_info *mtd, size_t len, size_t *retlen,
 			   struct otp_info *buf)
 {
-	if (!mtd->_get_user_prot_info)
+	struct mtd_info *master = mtd_get_master(mtd);
+
+	if (!master->_get_user_prot_info)
 		return -EOPNOTSUPP;
 	if (!len)
 		return 0;
-	return mtd->_get_user_prot_info(mtd, len, retlen, buf);
+	return master->_get_user_prot_info(master, len, retlen, buf);
 }
 EXPORT_SYMBOL_GPL(mtd_get_user_prot_info);
 
 int mtd_read_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len,
 			   size_t *retlen, u_char *buf)
 {
+	struct mtd_info *master = mtd_get_master(mtd);
+
 	*retlen = 0;
-	if (!mtd->_read_user_prot_reg)
+	if (!master->_read_user_prot_reg)
 		return -EOPNOTSUPP;
 	if (!len)
 		return 0;
-	return mtd->_read_user_prot_reg(mtd, from, len, retlen, buf);
+	return master->_read_user_prot_reg(master, from, len, retlen, buf);
 }
 EXPORT_SYMBOL_GPL(mtd_read_user_prot_reg);
 
 int mtd_write_user_prot_reg(struct mtd_info *mtd, loff_t to, size_t len,
 			    size_t *retlen, u_char *buf)
 {
+	struct mtd_info *master = mtd_get_master(mtd);
 	int ret;
 
 	*retlen = 0;
-	if (!mtd->_write_user_prot_reg)
+	if (!master->_write_user_prot_reg)
 		return -EOPNOTSUPP;
 	if (!len)
 		return 0;
-	ret = mtd->_write_user_prot_reg(mtd, to, len, retlen, buf);
+	ret = master->_write_user_prot_reg(master, to, len, retlen, buf);
 	if (ret)
 		return ret;
 
@@ -1718,80 +1796,105 @@ EXPORT_SYMBOL_GPL(mtd_write_user_prot_reg);
 
 int mtd_lock_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len)
 {
-	if (!mtd->_lock_user_prot_reg)
+	struct mtd_info *master = mtd_get_master(mtd);
+
+	if (!master->_lock_user_prot_reg)
 		return -EOPNOTSUPP;
 	if (!len)
 		return 0;
-	return mtd->_lock_user_prot_reg(mtd, from, len);
+	return master->_lock_user_prot_reg(master, from, len);
 }
 EXPORT_SYMBOL_GPL(mtd_lock_user_prot_reg);
 
 /* Chip-supported device locking */
 int mtd_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 {
-	if (!mtd->_lock)
+	struct mtd_info *master = mtd_get_master(mtd);
+
+	if (!master->_lock)
 		return -EOPNOTSUPP;
 	if (ofs < 0 || ofs >= mtd->size || len > mtd->size - ofs)
 		return -EINVAL;
 	if (!len)
 		return 0;
-	return mtd->_lock(mtd, ofs, len);
+	return master->_lock(master, mtd_get_master_ofs(mtd, ofs), len);
 }
 EXPORT_SYMBOL_GPL(mtd_lock);
 
 int mtd_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 {
-	if (!mtd->_unlock)
+	struct mtd_info *master = mtd_get_master(mtd);
+
+	if (!master->_unlock)
 		return -EOPNOTSUPP;
 	if (ofs < 0 || ofs >= mtd->size || len > mtd->size - ofs)
 		return -EINVAL;
 	if (!len)
 		return 0;
-	return mtd->_unlock(mtd, ofs, len);
+	return master->_unlock(master, mtd_get_master_ofs(mtd, ofs), len);
 }
 EXPORT_SYMBOL_GPL(mtd_unlock);
 
 int mtd_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 {
-	if (!mtd->_is_locked)
+	struct mtd_info *master = mtd_get_master(mtd);
+
+	if (!master->_is_locked)
 		return -EOPNOTSUPP;
 	if (ofs < 0 || ofs >= mtd->size || len > mtd->size - ofs)
 		return -EINVAL;
 	if (!len)
 		return 0;
-	return mtd->_is_locked(mtd, ofs, len);
+	return master->_is_locked(master, mtd_get_master_ofs(mtd, ofs), len);
 }
 EXPORT_SYMBOL_GPL(mtd_is_locked);
 
 int mtd_block_isreserved(struct mtd_info *mtd, loff_t ofs)
 {
+	struct mtd_info *master = mtd_get_master(mtd);
+
 	if (ofs < 0 || ofs >= mtd->size)
 		return -EINVAL;
-	if (!mtd->_block_isreserved)
+	if (!master->_block_isreserved)
 		return 0;
-	return mtd->_block_isreserved(mtd, ofs);
+	return master->_block_isreserved(master, mtd_get_master_ofs(mtd, ofs));
 }
 EXPORT_SYMBOL_GPL(mtd_block_isreserved);
 
 int mtd_block_isbad(struct mtd_info *mtd, loff_t ofs)
 {
+	struct mtd_info *master = mtd_get_master(mtd);
+
 	if (ofs < 0 || ofs >= mtd->size)
 		return -EINVAL;
-	if (!mtd->_block_isbad)
+	if (!master->_block_isbad)
 		return 0;
-	return mtd->_block_isbad(mtd, ofs);
+	return master->_block_isbad(master, mtd_get_master_ofs(mtd, ofs));
 }
 EXPORT_SYMBOL_GPL(mtd_block_isbad);
 
 int mtd_block_markbad(struct mtd_info *mtd, loff_t ofs)
 {
-	if (!mtd->_block_markbad)
+	struct mtd_info *master = mtd_get_master(mtd);
+	int ret;
+
+	if (!master->_block_markbad)
 		return -EOPNOTSUPP;
 	if (ofs < 0 || ofs >= mtd->size)
 		return -EINVAL;
 	if (!(mtd->flags & MTD_WRITEABLE))
 		return -EROFS;
-	return mtd->_block_markbad(mtd, ofs);
+
+	ret = master->_block_markbad(master, mtd_get_master_ofs(mtd, ofs));
+	if (ret)
+		return ret;
+
+	while (mtd->parent) {
+		mtd->ecc_stats.badblocks++;
+		mtd = mtd->parent;
+	}
+
+	return 0;
 }
 EXPORT_SYMBOL_GPL(mtd_block_markbad);
 
@@ -1841,12 +1944,17 @@ static int default_mtd_writev(struct mtd_info *mtd, const struct kvec *vecs,
 int mtd_writev(struct mtd_info *mtd, const struct kvec *vecs,
 	       unsigned long count, loff_t to, size_t *retlen)
 {
+	struct mtd_info *master = mtd_get_master(mtd);
+
 	*retlen = 0;
 	if (!(mtd->flags & MTD_WRITEABLE))
 		return -EROFS;
-	if (!mtd->_writev)
+
+	if (!master->_writev)
 		return default_mtd_writev(mtd, vecs, count, to, retlen);
-	return mtd->_writev(mtd, vecs, count, to, retlen);
+
+	return master->_writev(master, vecs, count,
+			       mtd_get_master_ofs(mtd, to), retlen);
 }
 EXPORT_SYMBOL_GPL(mtd_writev);
 
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index 7328c06..3f60256 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -20,339 +20,52 @@
 
 #include "mtdcore.h"
 
-/* Our partition linked list */
-static LIST_HEAD(mtd_partitions);
-static DEFINE_MUTEX(mtd_partitions_mutex);
-
-/**
- * struct mtd_part - our partition node structure
- *
- * @mtd: struct holding partition details
- * @parent: parent mtd - flash device or another partition
- * @offset: partition offset relative to the *flash device*
- */
-struct mtd_part {
-	struct mtd_info mtd;
-	struct mtd_info *parent;
-	uint64_t offset;
-	struct list_head list;
-};
-
-/*
- * Given a pointer to the MTD object in the mtd_part structure, we can retrieve
- * the pointer to that structure.
- */
-static inline struct mtd_part *mtd_to_part(const struct mtd_info *mtd)
-{
-	return container_of(mtd, struct mtd_part, mtd);
-}
-
-static u64 part_absolute_offset(struct mtd_info *mtd)
-{
-	struct mtd_part *part = mtd_to_part(mtd);
-
-	if (!mtd_is_partition(mtd))
-		return 0;
-
-	return part_absolute_offset(part->parent) + part->offset;
-}
-
 /*
  * MTD methods which simply translate the effective address and pass through
  * to the _real_ device.
  */
 
-static int part_read(struct mtd_info *mtd, loff_t from, size_t len,
-		size_t *retlen, u_char *buf)
+static inline void free_partition(struct mtd_info *mtd)
 {
-	struct mtd_part *part = mtd_to_part(mtd);
-	struct mtd_ecc_stats stats;
-	int res;
-
-	stats = part->parent->ecc_stats;
-	res = part->parent->_read(part->parent, from + part->offset, len,
-				  retlen, buf);
-	if (unlikely(mtd_is_eccerr(res)))
-		mtd->ecc_stats.failed +=
-			part->parent->ecc_stats.failed - stats.failed;
-	else
-		mtd->ecc_stats.corrected +=
-			part->parent->ecc_stats.corrected - stats.corrected;
-	return res;
+	kfree(mtd->name);
+	kfree(mtd);
 }
 
-static int part_point(struct mtd_info *mtd, loff_t from, size_t len,
-		size_t *retlen, void **virt, resource_size_t *phys)
-{
-	struct mtd_part *part = mtd_to_part(mtd);
-
-	return part->parent->_point(part->parent, from + part->offset, len,
-				    retlen, virt, phys);
-}
-
-static int part_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
-{
-	struct mtd_part *part = mtd_to_part(mtd);
-
-	return part->parent->_unpoint(part->parent, from + part->offset, len);
-}
-
-static int part_read_oob(struct mtd_info *mtd, loff_t from,
-		struct mtd_oob_ops *ops)
-{
-	struct mtd_part *part = mtd_to_part(mtd);
-	struct mtd_ecc_stats stats;
-	int res;
-
-	stats = part->parent->ecc_stats;
-	res = part->parent->_read_oob(part->parent, from + part->offset, ops);
-	if (unlikely(mtd_is_eccerr(res)))
-		mtd->ecc_stats.failed +=
-			part->parent->ecc_stats.failed - stats.failed;
-	else
-		mtd->ecc_stats.corrected +=
-			part->parent->ecc_stats.corrected - stats.corrected;
-	return res;
-}
-
-static int part_read_user_prot_reg(struct mtd_info *mtd, loff_t from,
-		size_t len, size_t *retlen, u_char *buf)
-{
-	struct mtd_part *part = mtd_to_part(mtd);
-	return part->parent->_read_user_prot_reg(part->parent, from, len,
-						 retlen, buf);
-}
-
-static int part_get_user_prot_info(struct mtd_info *mtd, size_t len,
-				   size_t *retlen, struct otp_info *buf)
-{
-	struct mtd_part *part = mtd_to_part(mtd);
-	return part->parent->_get_user_prot_info(part->parent, len, retlen,
-						 buf);
-}
-
-static int part_read_fact_prot_reg(struct mtd_info *mtd, loff_t from,
-		size_t len, size_t *retlen, u_char *buf)
-{
-	struct mtd_part *part = mtd_to_part(mtd);
-	return part->parent->_read_fact_prot_reg(part->parent, from, len,
-						 retlen, buf);
-}
-
-static int part_get_fact_prot_info(struct mtd_info *mtd, size_t len,
-				   size_t *retlen, struct otp_info *buf)
-{
-	struct mtd_part *part = mtd_to_part(mtd);
-	return part->parent->_get_fact_prot_info(part->parent, len, retlen,
-						 buf);
-}
-
-static int part_write(struct mtd_info *mtd, loff_t to, size_t len,
-		size_t *retlen, const u_char *buf)
-{
-	struct mtd_part *part = mtd_to_part(mtd);
-	return part->parent->_write(part->parent, to + part->offset, len,
-				    retlen, buf);
-}
-
-static int part_panic_write(struct mtd_info *mtd, loff_t to, size_t len,
-		size_t *retlen, const u_char *buf)
-{
-	struct mtd_part *part = mtd_to_part(mtd);
-	return part->parent->_panic_write(part->parent, to + part->offset, len,
-					  retlen, buf);
-}
-
-static int part_write_oob(struct mtd_info *mtd, loff_t to,
-		struct mtd_oob_ops *ops)
-{
-	struct mtd_part *part = mtd_to_part(mtd);
-
-	return part->parent->_write_oob(part->parent, to + part->offset, ops);
-}
-
-static int part_write_user_prot_reg(struct mtd_info *mtd, loff_t from,
-		size_t len, size_t *retlen, u_char *buf)
-{
-	struct mtd_part *part = mtd_to_part(mtd);
-	return part->parent->_write_user_prot_reg(part->parent, from, len,
-						  retlen, buf);
-}
-
-static int part_lock_user_prot_reg(struct mtd_info *mtd, loff_t from,
-		size_t len)
-{
-	struct mtd_part *part = mtd_to_part(mtd);
-	return part->parent->_lock_user_prot_reg(part->parent, from, len);
-}
-
-static int part_writev(struct mtd_info *mtd, const struct kvec *vecs,
-		unsigned long count, loff_t to, size_t *retlen)
-{
-	struct mtd_part *part = mtd_to_part(mtd);
-	return part->parent->_writev(part->parent, vecs, count,
-				     to + part->offset, retlen);
-}
-
-static int part_erase(struct mtd_info *mtd, struct erase_info *instr)
-{
-	struct mtd_part *part = mtd_to_part(mtd);
-	int ret;
-
-	instr->addr += part->offset;
-	ret = part->parent->_erase(part->parent, instr);
-	if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN)
-		instr->fail_addr -= part->offset;
-	instr->addr -= part->offset;
-
-	return ret;
-}
-
-static int part_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
-{
-	struct mtd_part *part = mtd_to_part(mtd);
-	return part->parent->_lock(part->parent, ofs + part->offset, len);
-}
-
-static int part_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
-{
-	struct mtd_part *part = mtd_to_part(mtd);
-	return part->parent->_unlock(part->parent, ofs + part->offset, len);
-}
-
-static int part_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
-{
-	struct mtd_part *part = mtd_to_part(mtd);
-	return part->parent->_is_locked(part->parent, ofs + part->offset, len);
-}
-
-static void part_sync(struct mtd_info *mtd)
-{
-	struct mtd_part *part = mtd_to_part(mtd);
-	part->parent->_sync(part->parent);
-}
-
-static int part_suspend(struct mtd_info *mtd)
-{
-	struct mtd_part *part = mtd_to_part(mtd);
-	return part->parent->_suspend(part->parent);
-}
-
-static void part_resume(struct mtd_info *mtd)
-{
-	struct mtd_part *part = mtd_to_part(mtd);
-	part->parent->_resume(part->parent);
-}
-
-static int part_block_isreserved(struct mtd_info *mtd, loff_t ofs)
-{
-	struct mtd_part *part = mtd_to_part(mtd);
-	ofs += part->offset;
-	return part->parent->_block_isreserved(part->parent, ofs);
-}
-
-static int part_block_isbad(struct mtd_info *mtd, loff_t ofs)
-{
-	struct mtd_part *part = mtd_to_part(mtd);
-	ofs += part->offset;
-	return part->parent->_block_isbad(part->parent, ofs);
-}
-
-static int part_block_markbad(struct mtd_info *mtd, loff_t ofs)
-{
-	struct mtd_part *part = mtd_to_part(mtd);
-	int res;
-
-	ofs += part->offset;
-	res = part->parent->_block_markbad(part->parent, ofs);
-	if (!res)
-		mtd->ecc_stats.badblocks++;
-	return res;
-}
-
-static int part_get_device(struct mtd_info *mtd)
-{
-	struct mtd_part *part = mtd_to_part(mtd);
-	return part->parent->_get_device(part->parent);
-}
-
-static void part_put_device(struct mtd_info *mtd)
-{
-	struct mtd_part *part = mtd_to_part(mtd);
-	part->parent->_put_device(part->parent);
-}
-
-static int part_ooblayout_ecc(struct mtd_info *mtd, int section,
-			      struct mtd_oob_region *oobregion)
-{
-	struct mtd_part *part = mtd_to_part(mtd);
-
-	return mtd_ooblayout_ecc(part->parent, section, oobregion);
-}
-
-static int part_ooblayout_free(struct mtd_info *mtd, int section,
-			       struct mtd_oob_region *oobregion)
-{
-	struct mtd_part *part = mtd_to_part(mtd);
-
-	return mtd_ooblayout_free(part->parent, section, oobregion);
-}
-
-static const struct mtd_ooblayout_ops part_ooblayout_ops = {
-	.ecc = part_ooblayout_ecc,
-	.free = part_ooblayout_free,
-};
-
-static int part_max_bad_blocks(struct mtd_info *mtd, loff_t ofs, size_t len)
-{
-	struct mtd_part *part = mtd_to_part(mtd);
-
-	return part->parent->_max_bad_blocks(part->parent,
-					     ofs + part->offset, len);
-}
-
-static inline void free_partition(struct mtd_part *p)
-{
-	kfree(p->mtd.name);
-	kfree(p);
-}
-
-static struct mtd_part *allocate_partition(struct mtd_info *parent,
-			const struct mtd_partition *part, int partno,
-			uint64_t cur_offset)
+static struct mtd_info *allocate_partition(struct mtd_info *parent,
+					   const struct mtd_partition *part,
+					   int partno, uint64_t cur_offset)
 {
 	int wr_alignment = (parent->flags & MTD_NO_ERASE) ? parent->writesize :
 							    parent->erasesize;
-	struct mtd_part *slave;
+	struct mtd_info *child, *master = mtd_get_master(parent);
 	u32 remainder;
 	char *name;
 	u64 tmp;
 
 	/* allocate the partition structure */
-	slave = kzalloc(sizeof(*slave), GFP_KERNEL);
+	child = kzalloc(sizeof(*child), GFP_KERNEL);
 	name = kstrdup(part->name, GFP_KERNEL);
-	if (!name || !slave) {
+	if (!name || !child) {
 		printk(KERN_ERR"memory allocation error while creating partitions for \"%s\"\n",
 		       parent->name);
 		kfree(name);
-		kfree(slave);
+		kfree(child);
 		return ERR_PTR(-ENOMEM);
 	}
 
 	/* set up the MTD object for this partition */
-	slave->mtd.type = parent->type;
-	slave->mtd.flags = parent->orig_flags & ~part->mask_flags;
-	slave->mtd.orig_flags = slave->mtd.flags;
-	slave->mtd.size = part->size;
-	slave->mtd.writesize = parent->writesize;
-	slave->mtd.writebufsize = parent->writebufsize;
-	slave->mtd.oobsize = parent->oobsize;
-	slave->mtd.oobavail = parent->oobavail;
-	slave->mtd.subpage_sft = parent->subpage_sft;
-	slave->mtd.pairing = parent->pairing;
+	child->type = parent->type;
+	child->part.flags = parent->flags & ~part->mask_flags;
+	child->flags = child->part.flags;
+	child->size = part->size;
+	child->writesize = parent->writesize;
+	child->writebufsize = parent->writebufsize;
+	child->oobsize = parent->oobsize;
+	child->oobavail = parent->oobavail;
+	child->subpage_sft = parent->subpage_sft;
 
-	slave->mtd.name = name;
-	slave->mtd.owner = parent->owner;
+	child->name = name;
+	child->owner = parent->owner;
 
 	/* NOTE: Historically, we didn't arrange MTDs as a tree out of
 	 * concern for showing the same data in multiple partitions.
@@ -360,134 +73,76 @@ static struct mtd_part *allocate_partition(struct mtd_info *parent,
 	 * so the MTD_PARTITIONED_MASTER option allows that. The master
 	 * will have device nodes etc only if this is set, so make the
 	 * parent conditional on that option. Note, this is a way to
-	 * distinguish between the master and the partition in sysfs.
+	 * distinguish between the parent and its partitions in sysfs.
 	 */
-	slave->mtd.dev.parent = IS_ENABLED(CONFIG_MTD_PARTITIONED_MASTER) || mtd_is_partition(parent) ?
-				&parent->dev :
-				parent->dev.parent;
-	slave->mtd.dev.of_node = part->of_node;
+	child->dev.parent = IS_ENABLED(CONFIG_MTD_PARTITIONED_MASTER) || mtd_is_partition(parent) ?
+			    &parent->dev : parent->dev.parent;
+	child->dev.of_node = part->of_node;
+	child->parent = parent;
+	child->part.offset = part->offset;
+	INIT_LIST_HEAD(&child->partitions);
 
-	if (parent->_read)
-		slave->mtd._read = part_read;
-	if (parent->_write)
-		slave->mtd._write = part_write;
-
-	if (parent->_panic_write)
-		slave->mtd._panic_write = part_panic_write;
-
-	if (parent->_point && parent->_unpoint) {
-		slave->mtd._point = part_point;
-		slave->mtd._unpoint = part_unpoint;
-	}
-
-	if (parent->_read_oob)
-		slave->mtd._read_oob = part_read_oob;
-	if (parent->_write_oob)
-		slave->mtd._write_oob = part_write_oob;
-	if (parent->_read_user_prot_reg)
-		slave->mtd._read_user_prot_reg = part_read_user_prot_reg;
-	if (parent->_read_fact_prot_reg)
-		slave->mtd._read_fact_prot_reg = part_read_fact_prot_reg;
-	if (parent->_write_user_prot_reg)
-		slave->mtd._write_user_prot_reg = part_write_user_prot_reg;
-	if (parent->_lock_user_prot_reg)
-		slave->mtd._lock_user_prot_reg = part_lock_user_prot_reg;
-	if (parent->_get_user_prot_info)
-		slave->mtd._get_user_prot_info = part_get_user_prot_info;
-	if (parent->_get_fact_prot_info)
-		slave->mtd._get_fact_prot_info = part_get_fact_prot_info;
-	if (parent->_sync)
-		slave->mtd._sync = part_sync;
-	if (!partno && !parent->dev.class && parent->_suspend &&
-	    parent->_resume) {
-		slave->mtd._suspend = part_suspend;
-		slave->mtd._resume = part_resume;
-	}
-	if (parent->_writev)
-		slave->mtd._writev = part_writev;
-	if (parent->_lock)
-		slave->mtd._lock = part_lock;
-	if (parent->_unlock)
-		slave->mtd._unlock = part_unlock;
-	if (parent->_is_locked)
-		slave->mtd._is_locked = part_is_locked;
-	if (parent->_block_isreserved)
-		slave->mtd._block_isreserved = part_block_isreserved;
-	if (parent->_block_isbad)
-		slave->mtd._block_isbad = part_block_isbad;
-	if (parent->_block_markbad)
-		slave->mtd._block_markbad = part_block_markbad;
-	if (parent->_max_bad_blocks)
-		slave->mtd._max_bad_blocks = part_max_bad_blocks;
-
-	if (parent->_get_device)
-		slave->mtd._get_device = part_get_device;
-	if (parent->_put_device)
-		slave->mtd._put_device = part_put_device;
-
-	slave->mtd._erase = part_erase;
-	slave->parent = parent;
-	slave->offset = part->offset;
-
-	if (slave->offset == MTDPART_OFS_APPEND)
-		slave->offset = cur_offset;
-	if (slave->offset == MTDPART_OFS_NXTBLK) {
+	if (child->part.offset == MTDPART_OFS_APPEND)
+		child->part.offset = cur_offset;
+	if (child->part.offset == MTDPART_OFS_NXTBLK) {
 		tmp = cur_offset;
-		slave->offset = cur_offset;
+		child->part.offset = cur_offset;
 		remainder = do_div(tmp, wr_alignment);
 		if (remainder) {
-			slave->offset += wr_alignment - remainder;
+			child->part.offset += wr_alignment - remainder;
 			printk(KERN_NOTICE "Moving partition %d: "
 			       "0x%012llx -> 0x%012llx\n", partno,
-			       (unsigned long long)cur_offset, (unsigned long long)slave->offset);
+			       (unsigned long long)cur_offset,
+			       child->part.offset);
 		}
 	}
-	if (slave->offset == MTDPART_OFS_RETAIN) {
-		slave->offset = cur_offset;
-		if (parent->size - slave->offset >= slave->mtd.size) {
-			slave->mtd.size = parent->size - slave->offset
-							- slave->mtd.size;
+	if (child->part.offset == MTDPART_OFS_RETAIN) {
+		child->part.offset = cur_offset;
+		if (parent->size - child->part.offset >= child->size) {
+			child->size = parent->size - child->part.offset -
+				      child->size;
 		} else {
 			printk(KERN_ERR "mtd partition \"%s\" doesn't have enough space: %#llx < %#llx, disabled\n",
-				part->name, parent->size - slave->offset,
-				slave->mtd.size);
+				part->name, parent->size - child->part.offset,
+				child->size);
 			/* register to preserve ordering */
 			goto out_register;
 		}
 	}
-	if (slave->mtd.size == MTDPART_SIZ_FULL)
-		slave->mtd.size = parent->size - slave->offset;
+	if (child->size == MTDPART_SIZ_FULL)
+		child->size = parent->size - child->part.offset;
 
-	printk(KERN_NOTICE "0x%012llx-0x%012llx : \"%s\"\n", (unsigned long long)slave->offset,
-		(unsigned long long)(slave->offset + slave->mtd.size), slave->mtd.name);
+	printk(KERN_NOTICE "0x%012llx-0x%012llx : \"%s\"\n",
+	       child->part.offset, child->part.offset + child->size,
+	       child->name);
 
 	/* let's do some sanity checks */
-	if (slave->offset >= parent->size) {
+	if (child->part.offset >= parent->size) {
 		/* let's register it anyway to preserve ordering */
-		slave->offset = 0;
-		slave->mtd.size = 0;
+		child->part.offset = 0;
+		child->size = 0;
 
 		/* Initialize ->erasesize to make add_mtd_device() happy. */
-		slave->mtd.erasesize = parent->erasesize;
-
+		child->erasesize = parent->erasesize;
 		printk(KERN_ERR"mtd: partition \"%s\" is out of reach -- disabled\n",
 			part->name);
 		goto out_register;
 	}
-	if (slave->offset + slave->mtd.size > parent->size) {
-		slave->mtd.size = parent->size - slave->offset;
+	if (child->part.offset + child->size > parent->size) {
+		child->size = parent->size - child->part.offset;
 		printk(KERN_WARNING"mtd: partition \"%s\" extends beyond the end of device \"%s\" -- size truncated to %#llx\n",
-			part->name, parent->name, (unsigned long long)slave->mtd.size);
+			part->name, parent->name, child->size);
 	}
 	if (parent->numeraseregions > 1) {
 		/* Deal with variable erase size stuff */
 		int i, max = parent->numeraseregions;
-		u64 end = slave->offset + slave->mtd.size;
+		u64 end = child->part.offset + child->size;
 		struct mtd_erase_region_info *regions = parent->eraseregions;
 
 		/* Find the first erase regions which is part of this
 		 * partition. */
-		for (i = 0; i < max && regions[i].offset <= slave->offset; i++)
+		for (i = 0; i < max && regions[i].offset <= child->part.offset;
+		     i++)
 			;
 		/* The loop searched for the region _behind_ the first one */
 		if (i > 0)
@@ -495,70 +150,68 @@ static struct mtd_part *allocate_partition(struct mtd_info *parent,
 
 		/* Pick biggest erasesize */
 		for (; i < max && regions[i].offset < end; i++) {
-			if (slave->mtd.erasesize < regions[i].erasesize) {
-				slave->mtd.erasesize = regions[i].erasesize;
-			}
+			if (child->erasesize < regions[i].erasesize)
+				child->erasesize = regions[i].erasesize;
 		}
-		BUG_ON(slave->mtd.erasesize == 0);
+		BUG_ON(child->erasesize == 0);
 	} else {
 		/* Single erase size */
-		slave->mtd.erasesize = parent->erasesize;
+		child->erasesize = parent->erasesize;
 	}
 
 	/*
-	 * Slave erasesize might differ from the master one if the master
+	 * Child erasesize might differ from the parent one if the parent
 	 * exposes several regions with different erasesize. Adjust
 	 * wr_alignment accordingly.
 	 */
-	if (!(slave->mtd.flags & MTD_NO_ERASE))
-		wr_alignment = slave->mtd.erasesize;
+	if (!(child->flags & MTD_NO_ERASE))
+		wr_alignment = child->erasesize;
 
-	tmp = part_absolute_offset(parent) + slave->offset;
+	tmp = mtd_get_master_ofs(child, 0);
 	remainder = do_div(tmp, wr_alignment);
-	if ((slave->mtd.flags & MTD_WRITEABLE) && remainder) {
+	if ((child->flags & MTD_WRITEABLE) && remainder) {
 		/* Doesn't start on a boundary of major erase size */
 		/* FIXME: Let it be writable if it is on a boundary of
 		 * _minor_ erase size though */
-		slave->mtd.flags &= ~MTD_WRITEABLE;
+		child->flags &= ~MTD_WRITEABLE;
 		printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase/write block boundary -- force read-only\n",
 			part->name);
 	}
 
-	tmp = part_absolute_offset(parent) + slave->mtd.size;
+	tmp = mtd_get_master_ofs(child, 0) + child->size;
 	remainder = do_div(tmp, wr_alignment);
-	if ((slave->mtd.flags & MTD_WRITEABLE) && remainder) {
-		slave->mtd.flags &= ~MTD_WRITEABLE;
+	if ((child->flags & MTD_WRITEABLE) && remainder) {
+		child->flags &= ~MTD_WRITEABLE;
 		printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase/write block -- force read-only\n",
 			part->name);
 	}
 
-	mtd_set_ooblayout(&slave->mtd, &part_ooblayout_ops);
-	slave->mtd.ecc_step_size = parent->ecc_step_size;
-	slave->mtd.ecc_strength = parent->ecc_strength;
-	slave->mtd.bitflip_threshold = parent->bitflip_threshold;
+	child->ecc_step_size = parent->ecc_step_size;
+	child->ecc_strength = parent->ecc_strength;
+	child->bitflip_threshold = parent->bitflip_threshold;
 
-	if (parent->_block_isbad) {
+	if (master->_block_isbad) {
 		uint64_t offs = 0;
 
-		while (offs < slave->mtd.size) {
-			if (mtd_block_isreserved(parent, offs + slave->offset))
-				slave->mtd.ecc_stats.bbtblocks++;
-			else if (mtd_block_isbad(parent, offs + slave->offset))
-				slave->mtd.ecc_stats.badblocks++;
-			offs += slave->mtd.erasesize;
+		while (offs < child->size) {
+			if (mtd_block_isreserved(child, offs))
+				child->ecc_stats.bbtblocks++;
+			else if (mtd_block_isbad(child, offs))
+				child->ecc_stats.badblocks++;
+			offs += child->erasesize;
 		}
 	}
 
 out_register:
-	return slave;
+	return child;
 }
 
 static ssize_t mtd_partition_offset_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
 	struct mtd_info *mtd = dev_get_drvdata(dev);
-	struct mtd_part *part = mtd_to_part(mtd);
-	return snprintf(buf, PAGE_SIZE, "%llu\n", part->offset);
+
+	return snprintf(buf, PAGE_SIZE, "%lld\n", mtd->part.offset);
 }
 
 static DEVICE_ATTR(offset, S_IRUGO, mtd_partition_offset_show, NULL);
@@ -568,9 +221,9 @@ static const struct attribute *mtd_partition_attrs[] = {
 	NULL
 };
 
-static int mtd_add_partition_attrs(struct mtd_part *new)
+static int mtd_add_partition_attrs(struct mtd_info *new)
 {
-	int ret = sysfs_create_files(&new->mtd.dev.kobj, mtd_partition_attrs);
+	int ret = sysfs_create_files(&new->dev.kobj, mtd_partition_attrs);
 	if (ret)
 		printk(KERN_WARNING
 		       "mtd: failed to create partition attrs, err=%d\n", ret);
@@ -580,8 +233,9 @@ static int mtd_add_partition_attrs(struct mtd_part *new)
 int mtd_add_partition(struct mtd_info *parent, const char *name,
 		      long long offset, long long length)
 {
+	struct mtd_info *master = mtd_get_master(parent);
 	struct mtd_partition part;
-	struct mtd_part *new;
+	struct mtd_info *child;
 	int ret = 0;
 
 	/* the direct offset is expected */
@@ -600,28 +254,28 @@ int mtd_add_partition(struct mtd_info *parent, const char *name,
 	part.size = length;
 	part.offset = offset;
 
-	new = allocate_partition(parent, &part, -1, offset);
-	if (IS_ERR(new))
-		return PTR_ERR(new);
+	child = allocate_partition(parent, &part, -1, offset);
+	if (IS_ERR(child))
+		return PTR_ERR(child);
 
-	mutex_lock(&mtd_partitions_mutex);
-	list_add(&new->list, &mtd_partitions);
-	mutex_unlock(&mtd_partitions_mutex);
+	mutex_lock(&master->master.partitions_lock);
+	list_add_tail(&child->part.node, &parent->partitions);
+	mutex_unlock(&master->master.partitions_lock);
 
-	ret = add_mtd_device(&new->mtd);
+	ret = add_mtd_device(child);
 	if (ret)
 		goto err_remove_part;
 
-	mtd_add_partition_attrs(new);
+	mtd_add_partition_attrs(child);
 
 	return 0;
 
 err_remove_part:
-	mutex_lock(&mtd_partitions_mutex);
-	list_del(&new->list);
-	mutex_unlock(&mtd_partitions_mutex);
+	mutex_lock(&master->master.partitions_lock);
+	list_del(&child->part.node);
+	mutex_unlock(&master->master.partitions_lock);
 
-	free_partition(new);
+	free_partition(child);
 
 	return ret;
 }
@@ -630,119 +284,142 @@ EXPORT_SYMBOL_GPL(mtd_add_partition);
 /**
  * __mtd_del_partition - delete MTD partition
  *
- * @priv: internal MTD struct for partition to be deleted
+ * @priv: MTD structure to be deleted
  *
  * This function must be called with the partitions mutex locked.
  */
-static int __mtd_del_partition(struct mtd_part *priv)
+static int __mtd_del_partition(struct mtd_info *mtd)
 {
-	struct mtd_part *child, *next;
+	struct mtd_info *child, *next;
 	int err;
 
-	list_for_each_entry_safe(child, next, &mtd_partitions, list) {
-		if (child->parent == &priv->mtd) {
-			err = __mtd_del_partition(child);
-			if (err)
-				return err;
-		}
+	list_for_each_entry_safe(child, next, &mtd->partitions, part.node) {
+		err = __mtd_del_partition(child);
+		if (err)
+			return err;
 	}
 
-	sysfs_remove_files(&priv->mtd.dev.kobj, mtd_partition_attrs);
+	sysfs_remove_files(&mtd->dev.kobj, mtd_partition_attrs);
 
-	err = del_mtd_device(&priv->mtd);
+	err = del_mtd_device(mtd);
 	if (err)
 		return err;
 
-	list_del(&priv->list);
-	free_partition(priv);
+	list_del(&child->part.node);
+	free_partition(mtd);
 
 	return 0;
 }
 
 /*
  * This function unregisters and destroy all slave MTD objects which are
- * attached to the given MTD object.
+ * attached to the given MTD object, recursively.
  */
-int del_mtd_partitions(struct mtd_info *mtd)
+static int __del_mtd_partitions(struct mtd_info *mtd)
 {
-	struct mtd_part *slave, *next;
+	struct mtd_info *child, *next;
+	LIST_HEAD(tmp_list);
 	int ret, err = 0;
 
-	mutex_lock(&mtd_partitions_mutex);
-	list_for_each_entry_safe(slave, next, &mtd_partitions, list)
-		if (slave->parent == mtd) {
-			ret = __mtd_del_partition(slave);
-			if (ret < 0)
-				err = ret;
+	list_for_each_entry_safe(child, next, &mtd->partitions, part.node) {
+		if (mtd_has_partitions(child))
+			del_mtd_partitions(child);
+
+		pr_info("Deleting %s MTD partition\n", child->name);
+		ret = del_mtd_device(child);
+		if (ret < 0) {
+			pr_err("Error when deleting partition \"%s\" (%d)\n",
+			       child->name, ret);
+			err = ret;
+			continue;
 		}
-	mutex_unlock(&mtd_partitions_mutex);
+
+		list_del(&child->part.node);
+		free_partition(child);
+	}
 
 	return err;
 }
 
+int del_mtd_partitions(struct mtd_info *mtd)
+{
+	struct mtd_info *master = mtd_get_master(mtd);
+	int ret;
+
+	pr_info("Deleting MTD partitions on \"%s\":\n", mtd->name);
+
+	mutex_lock(&master->master.partitions_lock);
+	ret = __del_mtd_partitions(mtd);
+	mutex_unlock(&master->master.partitions_lock);
+
+	return ret;
+}
+
 int mtd_del_partition(struct mtd_info *mtd, int partno)
 {
-	struct mtd_part *slave, *next;
+	struct mtd_info *child, *master = mtd_get_master(mtd);
 	int ret = -EINVAL;
 
-	mutex_lock(&mtd_partitions_mutex);
-	list_for_each_entry_safe(slave, next, &mtd_partitions, list)
-		if ((slave->parent == mtd) &&
-		    (slave->mtd.index == partno)) {
-			ret = __mtd_del_partition(slave);
+	mutex_lock(&master->master.partitions_lock);
+	list_for_each_entry(child, &mtd->partitions, part.node) {
+		if (child->index == partno) {
+			ret = __mtd_del_partition(child);
 			break;
 		}
-	mutex_unlock(&mtd_partitions_mutex);
+	}
+	mutex_unlock(&master->master.partitions_lock);
 
 	return ret;
 }
 EXPORT_SYMBOL_GPL(mtd_del_partition);
 
 /*
- * This function, given a master MTD object and a partition table, creates
- * and registers slave MTD objects which are bound to the master according to
- * the partition definitions.
+ * This function, given a parent MTD object and a partition table, creates
+ * and registers the child MTD objects which are bound to the parent according
+ * to the partition definitions.
  *
- * For historical reasons, this function's caller only registers the master
+ * For historical reasons, this function's caller only registers the parent
  * if the MTD_PARTITIONED_MASTER config option is set.
  */
 
-int add_mtd_partitions(struct mtd_info *master,
+int add_mtd_partitions(struct mtd_info *parent,
 		       const struct mtd_partition *parts,
 		       int nbparts)
 {
-	struct mtd_part *slave;
+	struct mtd_info *child, *master = mtd_get_master(parent);
 	uint64_t cur_offset = 0;
 	int i, ret;
 
-	printk(KERN_NOTICE "Creating %d MTD partitions on \"%s\":\n", nbparts, master->name);
+	printk(KERN_NOTICE "Creating %d MTD partitions on \"%s\":\n",
+	       nbparts, parent->name);
 
 	for (i = 0; i < nbparts; i++) {
-		slave = allocate_partition(master, parts + i, i, cur_offset);
-		if (IS_ERR(slave)) {
-			ret = PTR_ERR(slave);
+		child = allocate_partition(parent, parts + i, i, cur_offset);
+		if (IS_ERR(child)) {
+			ret = PTR_ERR(child);
 			goto err_del_partitions;
 		}
 
-		mutex_lock(&mtd_partitions_mutex);
-		list_add(&slave->list, &mtd_partitions);
-		mutex_unlock(&mtd_partitions_mutex);
+		mutex_lock(&master->master.partitions_lock);
+		list_add_tail(&child->part.node, &parent->partitions);
+		mutex_unlock(&master->master.partitions_lock);
 
-		ret = add_mtd_device(&slave->mtd);
+		ret = add_mtd_device(child);
 		if (ret) {
-			mutex_lock(&mtd_partitions_mutex);
-			list_del(&slave->list);
-			mutex_unlock(&mtd_partitions_mutex);
+			mutex_lock(&master->master.partitions_lock);
+			list_del(&child->part.node);
+			mutex_unlock(&master->master.partitions_lock);
 
-			free_partition(slave);
+			free_partition(child);
 			goto err_del_partitions;
 		}
 
-		mtd_add_partition_attrs(slave);
-		/* Look for subpartitions */
-		parse_mtd_partitions(&slave->mtd, parts[i].types, NULL);
+		mtd_add_partition_attrs(child);
 
-		cur_offset = slave->offset + slave->mtd.size;
+		/* Look for subpartitions */
+		parse_mtd_partitions(child, parts[i].types, NULL);
+
+		cur_offset = child->part.offset + child->size;
 	}
 
 	return 0;
@@ -1023,29 +700,11 @@ void mtd_part_parser_cleanup(struct mtd_partitions *parts)
 	}
 }
 
-int mtd_is_partition(const struct mtd_info *mtd)
-{
-	struct mtd_part *part;
-	int ispart = 0;
-
-	mutex_lock(&mtd_partitions_mutex);
-	list_for_each_entry(part, &mtd_partitions, list)
-		if (&part->mtd == mtd) {
-			ispart = 1;
-			break;
-		}
-	mutex_unlock(&mtd_partitions_mutex);
-
-	return ispart;
-}
-EXPORT_SYMBOL_GPL(mtd_is_partition);
-
 /* Returns the size of the entire flash chip */
 uint64_t mtd_get_device_size(const struct mtd_info *mtd)
 {
-	if (!mtd_is_partition(mtd))
-		return mtd->size;
+	struct mtd_info *master = mtd_get_master((struct mtd_info *)mtd);
 
-	return mtd_get_device_size(mtd_to_part(mtd)->parent);
+	return master->size;
 }
 EXPORT_SYMBOL_GPL(mtd_get_device_size);
diff --git a/drivers/mtd/nand/onenand/onenand_base.c b/drivers/mtd/nand/onenand/onenand_base.c
index d5326d1..ec18ade 100644
--- a/drivers/mtd/nand/onenand/onenand_base.c
+++ b/drivers/mtd/nand/onenand/onenand_base.c
@@ -3259,7 +3259,7 @@ static void onenand_check_features(struct mtd_info *mtd)
 	switch (density) {
 	case ONENAND_DEVICE_DENSITY_8Gb:
 		this->options |= ONENAND_HAS_NOP_1;
-		/* fall through */
+		fallthrough;
 	case ONENAND_DEVICE_DENSITY_4Gb:
 		if (ONENAND_IS_DDP(this))
 			this->options |= ONENAND_HAS_2PLANE;
diff --git a/drivers/mtd/nand/raw/ams-delta.c b/drivers/mtd/nand/raw/ams-delta.c
index 8312182..d66dab2 100644
--- a/drivers/mtd/nand/raw/ams-delta.c
+++ b/drivers/mtd/nand/raw/ams-delta.c
@@ -19,15 +19,17 @@
 #include <linux/delay.h>
 #include <linux/gpio/consumer.h>
 #include <linux/mtd/mtd.h>
+#include <linux/mtd/nand-gpio.h>
 #include <linux/mtd/rawnand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/sizes.h>
 
 /*
  * MTD structure for E3 (Delta)
  */
-struct ams_delta_nand {
+struct gpio_nand {
 	struct nand_controller	base;
 	struct nand_chip	nand_chip;
 	struct gpio_desc	*gpiod_rdy;
@@ -39,41 +41,20 @@ struct ams_delta_nand {
 	struct gpio_desc	*gpiod_cle;
 	struct gpio_descs	*data_gpiods;
 	bool			data_in;
+	unsigned int		tRP;
+	unsigned int		tWP;
+	u8			(*io_read)(struct gpio_nand *this);
+	void			(*io_write)(struct gpio_nand *this, u8 byte);
 };
 
-/*
- * Define partitions for flash devices
- */
-
-static const struct mtd_partition partition_info[] = {
-	{ .name		= "Kernel",
-	  .offset	= 0,
-	  .size		= 3 * SZ_1M + SZ_512K },
-	{ .name		= "u-boot",
-	  .offset	= 3 * SZ_1M + SZ_512K,
-	  .size		= SZ_256K },
-	{ .name		= "u-boot params",
-	  .offset	= 3 * SZ_1M + SZ_512K + SZ_256K,
-	  .size		= SZ_256K },
-	{ .name		= "Amstrad LDR",
-	  .offset	= 4 * SZ_1M,
-	  .size		= SZ_256K },
-	{ .name		= "File system",
-	  .offset	= 4 * SZ_1M + 1 * SZ_256K,
-	  .size		= 27 * SZ_1M },
-	{ .name		= "PBL reserved",
-	  .offset	= 32 * SZ_1M - 3 * SZ_256K,
-	  .size		=  3 * SZ_256K },
-};
-
-static void ams_delta_write_commit(struct ams_delta_nand *priv)
+static void gpio_nand_write_commit(struct gpio_nand *priv)
 {
-	gpiod_set_value(priv->gpiod_nwe, 0);
-	ndelay(40);
 	gpiod_set_value(priv->gpiod_nwe, 1);
+	ndelay(priv->tWP);
+	gpiod_set_value(priv->gpiod_nwe, 0);
 }
 
-static void ams_delta_io_write(struct ams_delta_nand *priv, u8 byte)
+static void gpio_nand_io_write(struct gpio_nand *priv, u8 byte)
 {
 	struct gpio_descs *data_gpiods = priv->data_gpiods;
 	DECLARE_BITMAP(values, BITS_PER_TYPE(byte)) = { byte, };
@@ -81,10 +62,10 @@ static void ams_delta_io_write(struct ams_delta_nand *priv, u8 byte)
 	gpiod_set_raw_array_value(data_gpiods->ndescs, data_gpiods->desc,
 				  data_gpiods->info, values);
 
-	ams_delta_write_commit(priv);
+	gpio_nand_write_commit(priv);
 }
 
-static void ams_delta_dir_output(struct ams_delta_nand *priv, u8 byte)
+static void gpio_nand_dir_output(struct gpio_nand *priv, u8 byte)
 {
 	struct gpio_descs *data_gpiods = priv->data_gpiods;
 	DECLARE_BITMAP(values, BITS_PER_TYPE(byte)) = { byte, };
@@ -94,30 +75,30 @@ static void ams_delta_dir_output(struct ams_delta_nand *priv, u8 byte)
 		gpiod_direction_output_raw(data_gpiods->desc[i],
 					   test_bit(i, values));
 
-	ams_delta_write_commit(priv);
+	gpio_nand_write_commit(priv);
 
 	priv->data_in = false;
 }
 
-static u8 ams_delta_io_read(struct ams_delta_nand *priv)
+static u8 gpio_nand_io_read(struct gpio_nand *priv)
 {
 	u8 res;
 	struct gpio_descs *data_gpiods = priv->data_gpiods;
 	DECLARE_BITMAP(values, BITS_PER_TYPE(res)) = { 0, };
 
-	gpiod_set_value(priv->gpiod_nre, 0);
-	ndelay(40);
+	gpiod_set_value(priv->gpiod_nre, 1);
+	ndelay(priv->tRP);
 
 	gpiod_get_raw_array_value(data_gpiods->ndescs, data_gpiods->desc,
 				  data_gpiods->info, values);
 
-	gpiod_set_value(priv->gpiod_nre, 1);
+	gpiod_set_value(priv->gpiod_nre, 0);
 
 	res = values[0];
 	return res;
 }
 
-static void ams_delta_dir_input(struct ams_delta_nand *priv)
+static void gpio_nand_dir_input(struct gpio_nand *priv)
 {
 	struct gpio_descs *data_gpiods = priv->data_gpiods;
 	int i;
@@ -128,68 +109,67 @@ static void ams_delta_dir_input(struct ams_delta_nand *priv)
 	priv->data_in = true;
 }
 
-static void ams_delta_write_buf(struct ams_delta_nand *priv, const u8 *buf,
-				int len)
+static void gpio_nand_write_buf(struct gpio_nand *priv, const u8 *buf, int len)
 {
 	int i = 0;
 
 	if (len > 0 && priv->data_in)
-		ams_delta_dir_output(priv, buf[i++]);
+		gpio_nand_dir_output(priv, buf[i++]);
 
 	while (i < len)
-		ams_delta_io_write(priv, buf[i++]);
+		priv->io_write(priv, buf[i++]);
 }
 
-static void ams_delta_read_buf(struct ams_delta_nand *priv, u8 *buf, int len)
+static void gpio_nand_read_buf(struct gpio_nand *priv, u8 *buf, int len)
 {
 	int i;
 
-	if (!priv->data_in)
-		ams_delta_dir_input(priv);
+	if (priv->data_gpiods && !priv->data_in)
+		gpio_nand_dir_input(priv);
 
 	for (i = 0; i < len; i++)
-		buf[i] = ams_delta_io_read(priv);
+		buf[i] = priv->io_read(priv);
 }
 
-static void ams_delta_ctrl_cs(struct ams_delta_nand *priv, bool assert)
+static void gpio_nand_ctrl_cs(struct gpio_nand *priv, bool assert)
 {
-	gpiod_set_value(priv->gpiod_nce, assert ? 0 : 1);
+	gpiod_set_value(priv->gpiod_nce, assert);
 }
 
-static int ams_delta_exec_op(struct nand_chip *this,
+static int gpio_nand_exec_op(struct nand_chip *this,
 			     const struct nand_operation *op, bool check_only)
 {
-	struct ams_delta_nand *priv = nand_get_controller_data(this);
+	struct gpio_nand *priv = nand_get_controller_data(this);
 	const struct nand_op_instr *instr;
 	int ret = 0;
 
 	if (check_only)
 		return 0;
 
-	ams_delta_ctrl_cs(priv, 1);
+	gpio_nand_ctrl_cs(priv, 1);
 
 	for (instr = op->instrs; instr < op->instrs + op->ninstrs; instr++) {
 		switch (instr->type) {
 		case NAND_OP_CMD_INSTR:
 			gpiod_set_value(priv->gpiod_cle, 1);
-			ams_delta_write_buf(priv, &instr->ctx.cmd.opcode, 1);
+			gpio_nand_write_buf(priv, &instr->ctx.cmd.opcode, 1);
 			gpiod_set_value(priv->gpiod_cle, 0);
 			break;
 
 		case NAND_OP_ADDR_INSTR:
 			gpiod_set_value(priv->gpiod_ale, 1);
-			ams_delta_write_buf(priv, instr->ctx.addr.addrs,
+			gpio_nand_write_buf(priv, instr->ctx.addr.addrs,
 					    instr->ctx.addr.naddrs);
 			gpiod_set_value(priv->gpiod_ale, 0);
 			break;
 
 		case NAND_OP_DATA_IN_INSTR:
-			ams_delta_read_buf(priv, instr->ctx.data.buf.in,
+			gpio_nand_read_buf(priv, instr->ctx.data.buf.in,
 					   instr->ctx.data.len);
 			break;
 
 		case NAND_OP_DATA_OUT_INSTR:
-			ams_delta_write_buf(priv, instr->ctx.data.buf.out,
+			gpio_nand_write_buf(priv, instr->ctx.data.buf.out,
 					    instr->ctx.data.len);
 			break;
 
@@ -206,28 +186,61 @@ static int ams_delta_exec_op(struct nand_chip *this,
 			break;
 	}
 
-	ams_delta_ctrl_cs(priv, 0);
+	gpio_nand_ctrl_cs(priv, 0);
 
 	return ret;
 }
 
-static const struct nand_controller_ops ams_delta_ops = {
-	.exec_op = ams_delta_exec_op,
+static int gpio_nand_setup_data_interface(struct nand_chip *this, int csline,
+					  const struct nand_data_interface *cf)
+{
+	struct gpio_nand *priv = nand_get_controller_data(this);
+	const struct nand_sdr_timings *sdr = nand_get_sdr_timings(cf);
+	struct device *dev = &nand_to_mtd(this)->dev;
+
+	if (IS_ERR(sdr))
+		return PTR_ERR(sdr);
+
+	if (csline == NAND_DATA_IFACE_CHECK_ONLY)
+		return 0;
+
+	if (priv->gpiod_nre) {
+		priv->tRP = DIV_ROUND_UP(sdr->tRP_min, 1000);
+		dev_dbg(dev, "using %u ns read pulse width\n", priv->tRP);
+	}
+
+	priv->tWP = DIV_ROUND_UP(sdr->tWP_min, 1000);
+	dev_dbg(dev, "using %u ns write pulse width\n", priv->tWP);
+
+	return 0;
+}
+
+static const struct nand_controller_ops gpio_nand_ops = {
+	.exec_op = gpio_nand_exec_op,
+	.setup_data_interface = gpio_nand_setup_data_interface,
 };
 
 /*
  * Main initialization routine
  */
-static int ams_delta_init(struct platform_device *pdev)
+static int gpio_nand_probe(struct platform_device *pdev)
 {
-	struct ams_delta_nand *priv;
+	struct gpio_nand_platdata *pdata = dev_get_platdata(&pdev->dev);
+	const struct mtd_partition *partitions = NULL;
+	int num_partitions = 0;
+	struct gpio_nand *priv;
 	struct nand_chip *this;
 	struct mtd_info *mtd;
-	struct gpio_descs *data_gpiods;
+	int (*probe)(struct platform_device *pdev, struct gpio_nand *priv);
 	int err = 0;
 
+	if (pdata) {
+		partitions = pdata->parts;
+		num_partitions = pdata->num_parts;
+	}
+
 	/* Allocate memory for MTD device structure and private data */
-	priv = devm_kzalloc(&pdev->dev, sizeof(struct ams_delta_nand),
+	priv = devm_kzalloc(&pdev->dev, sizeof(struct gpio_nand),
 			    GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
@@ -238,6 +251,7 @@ static int ams_delta_init(struct platform_device *pdev)
 	mtd->dev.parent = &pdev->dev;
 
 	nand_set_controller_data(this, priv);
+	nand_set_flash_node(this, pdev->dev.of_node);
 
 	priv->gpiod_rdy = devm_gpiod_get_optional(&pdev->dev, "rdy", GPIOD_IN);
 	if (IS_ERR(priv->gpiod_rdy)) {
@@ -251,29 +265,33 @@ static int ams_delta_init(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, priv);
 
-	/* Set chip enabled, but  */
-	priv->gpiod_nwp = devm_gpiod_get(&pdev->dev, "nwp", GPIOD_OUT_HIGH);
+	/* Set chip enabled but write protected */
+	priv->gpiod_nwp = devm_gpiod_get_optional(&pdev->dev, "nwp",
+						  GPIOD_OUT_HIGH);
 	if (IS_ERR(priv->gpiod_nwp)) {
 		err = PTR_ERR(priv->gpiod_nwp);
 		dev_err(&pdev->dev, "NWP GPIO request failed (%d)\n", err);
 		return err;
 	}
 
-	priv->gpiod_nce = devm_gpiod_get(&pdev->dev, "nce", GPIOD_OUT_HIGH);
+	priv->gpiod_nce = devm_gpiod_get_optional(&pdev->dev, "nce",
+						  GPIOD_OUT_LOW);
 	if (IS_ERR(priv->gpiod_nce)) {
 		err = PTR_ERR(priv->gpiod_nce);
 		dev_err(&pdev->dev, "NCE GPIO request failed (%d)\n", err);
 		return err;
 	}
 
-	priv->gpiod_nre = devm_gpiod_get(&pdev->dev, "nre", GPIOD_OUT_HIGH);
+	priv->gpiod_nre = devm_gpiod_get_optional(&pdev->dev, "nre",
+						  GPIOD_OUT_LOW);
 	if (IS_ERR(priv->gpiod_nre)) {
 		err = PTR_ERR(priv->gpiod_nre);
 		dev_err(&pdev->dev, "NRE GPIO request failed (%d)\n", err);
 		return err;
 	}
 
-	priv->gpiod_nwe = devm_gpiod_get(&pdev->dev, "nwe", GPIOD_OUT_HIGH);
+	priv->gpiod_nwe = devm_gpiod_get_optional(&pdev->dev, "nwe",
+						  GPIOD_OUT_LOW);
 	if (IS_ERR(priv->gpiod_nwe)) {
 		err = PTR_ERR(priv->gpiod_nwe);
 		dev_err(&pdev->dev, "NWE GPIO request failed (%d)\n", err);
@@ -295,28 +313,62 @@ static int ams_delta_init(struct platform_device *pdev)
 	}
 
 	/* Request array of data pins, initialize them as input */
-	data_gpiods = devm_gpiod_get_array(&pdev->dev, "data", GPIOD_IN);
-	if (IS_ERR(data_gpiods)) {
-		err = PTR_ERR(data_gpiods);
+	priv->data_gpiods = devm_gpiod_get_array_optional(&pdev->dev, "data",
+							  GPIOD_IN);
+	if (IS_ERR(priv->data_gpiods)) {
+		err = PTR_ERR(priv->data_gpiods);
 		dev_err(&pdev->dev, "data GPIO request failed: %d\n", err);
 		return err;
 	}
-	priv->data_gpiods = data_gpiods;
-	priv->data_in = true;
+	if (priv->data_gpiods) {
+		if (!priv->gpiod_nwe) {
+			dev_err(&pdev->dev,
+				"mandatory NWE pin not provided by platform\n");
+			return -ENODEV;
+		}
 
-	/* Initialize the NAND controller object embedded in ams_delta_nand. */
-	priv->base.ops = &ams_delta_ops;
+		priv->io_read = gpio_nand_io_read;
+		priv->io_write = gpio_nand_io_write;
+		priv->data_in = true;
+	}
+
+	if (pdev->id_entry)
+		probe = (void *) pdev->id_entry->driver_data;
+	else
+		probe = of_device_get_match_data(&pdev->dev);
+	if (probe)
+		err = probe(pdev, priv);
+	if (err)
+		return err;
+
+	if (!priv->io_read || !priv->io_write) {
+		dev_err(&pdev->dev, "incomplete device configuration\n");
+		return -ENODEV;
+	}
+
+	/* Initialize the NAND controller object embedded in gpio_nand. */
+	priv->base.ops = &gpio_nand_ops;
 	nand_controller_init(&priv->base);
 	this->controller = &priv->base;
 
+	/*
+	 * FIXME: We should release write protection only after nand_scan() to
+	 * be on the safe side but we can't do that until we have a generic way
+	 * to assert/deassert WP from the core.  Even if the core shouldn't
+	 * write things in the nand_scan() path, it should have control on this
+	 * pin just in case we ever need to disable write protection during
+	 * chip detection/initialization.
+	 */
+	/* Release write protection */
+	gpiod_set_value(priv->gpiod_nwp, 0);
+
 	/* Scan to find existence of the device */
 	err = nand_scan(this, 1);
 	if (err)
 		return err;
 
 	/* Register the partitions */
-	err = mtd_device_register(mtd, partition_info,
-				  ARRAY_SIZE(partition_info));
+	err = mtd_device_register(mtd, partitions, num_partitions);
 	if (err)
 		goto err_nand_cleanup;
 
@@ -331,26 +383,47 @@ static int ams_delta_init(struct platform_device *pdev)
 /*
  * Clean up routine
  */
-static int ams_delta_cleanup(struct platform_device *pdev)
+static int gpio_nand_remove(struct platform_device *pdev)
 {
-	struct ams_delta_nand *priv = platform_get_drvdata(pdev);
+	struct gpio_nand *priv = platform_get_drvdata(pdev);
 	struct mtd_info *mtd = nand_to_mtd(&priv->nand_chip);
 
+	/* Apply write protection */
+	gpiod_set_value(priv->gpiod_nwp, 1);
+
 	/* Unregister device */
 	nand_release(mtd_to_nand(mtd));
 
 	return 0;
 }
 
-static struct platform_driver ams_delta_nand_driver = {
-	.probe		= ams_delta_init,
-	.remove		= ams_delta_cleanup,
+static const struct of_device_id gpio_nand_of_id_table[] = {
+	{
+		/* sentinel */
+	},
+};
+MODULE_DEVICE_TABLE(of, gpio_nand_of_id_table);
+
+static const struct platform_device_id gpio_nand_plat_id_table[] = {
+	{
+		.name	= "ams-delta-nand",
+	}, {
+		/* sentinel */
+	},
+};
+MODULE_DEVICE_TABLE(platform, gpio_nand_plat_id_table);
+
+static struct platform_driver gpio_nand_driver = {
+	.probe		= gpio_nand_probe,
+	.remove		= gpio_nand_remove,
+	.id_table	= gpio_nand_plat_id_table,
 	.driver		= {
 		.name	= "ams-delta-nand",
+		.of_match_table = of_match_ptr(gpio_nand_of_id_table),
 	},
 };
 
-module_platform_driver(ams_delta_nand_driver);
+module_platform_driver(gpio_nand_driver);
 
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Jonathan McDowell <noodles@earth.li>");
diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
index 44518dad..e4e3cee 100644
--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
@@ -102,6 +102,45 @@ struct brcm_nand_dma_desc {
 #define NAND_CTRL_RDY			(INTFC_CTLR_READY | INTFC_FLASH_READY)
 #define NAND_POLL_STATUS_TIMEOUT_MS	100
 
+#define EDU_CMD_WRITE          0x00
+#define EDU_CMD_READ           0x01
+#define EDU_STATUS_ACTIVE      BIT(0)
+#define EDU_ERR_STATUS_ERRACK  BIT(0)
+#define EDU_DONE_MASK		GENMASK(1, 0)
+
+#define EDU_CONFIG_MODE_NAND   BIT(0)
+#define EDU_CONFIG_SWAP_BYTE   BIT(1)
+#ifdef CONFIG_CPU_BIG_ENDIAN
+#define EDU_CONFIG_SWAP_CFG     EDU_CONFIG_SWAP_BYTE
+#else
+#define EDU_CONFIG_SWAP_CFG     0
+#endif
+
+/* edu registers */
+enum edu_reg {
+	EDU_CONFIG = 0,
+	EDU_DRAM_ADDR,
+	EDU_EXT_ADDR,
+	EDU_LENGTH,
+	EDU_CMD,
+	EDU_STOP,
+	EDU_STATUS,
+	EDU_DONE,
+	EDU_ERR_STATUS,
+};
+
+static const u16  edu_regs[] = {
+	[EDU_CONFIG] = 0x00,
+	[EDU_DRAM_ADDR] = 0x04,
+	[EDU_EXT_ADDR] = 0x08,
+	[EDU_LENGTH] = 0x0c,
+	[EDU_CMD] = 0x10,
+	[EDU_STOP] = 0x14,
+	[EDU_STATUS] = 0x18,
+	[EDU_DONE] = 0x1c,
+	[EDU_ERR_STATUS] = 0x20,
+};
+
 /* flash_dma registers */
 enum flash_dma_reg {
 	FLASH_DMA_REVISION = 0,
@@ -167,6 +206,8 @@ enum {
 	BRCMNAND_HAS_WP				= BIT(3),
 };
 
+struct brcmnand_host;
+
 struct brcmnand_controller {
 	struct device		*dev;
 	struct nand_controller	controller;
@@ -185,17 +226,32 @@ struct brcmnand_controller {
 
 	int			cmd_pending;
 	bool			dma_pending;
+	bool                    edu_pending;
 	struct completion	done;
 	struct completion	dma_done;
+	struct completion       edu_done;
 
 	/* List of NAND hosts (one for each chip-select) */
 	struct list_head host_list;
 
+	/* EDU info, per-transaction */
+	const u16               *edu_offsets;
+	void __iomem            *edu_base;
+	int			edu_irq;
+	int                     edu_count;
+	u64                     edu_dram_addr;
+	u32                     edu_ext_addr;
+	u32                     edu_cmd;
+	u32                     edu_config;
+
 	/* flash_dma reg */
 	const u16		*flash_dma_offsets;
 	struct brcm_nand_dma_desc *dma_desc;
 	dma_addr_t		dma_pa;
 
+	int (*dma_trans)(struct brcmnand_host *host, u64 addr, u32 *buf,
+			 u32 len, u8 dma_cmd);
+
 	/* in-memory cache of the FLASH_CACHE, used only for some commands */
 	u8			flash_cache[FC_BYTES];
 
@@ -216,6 +272,7 @@ struct brcmnand_controller {
 	u32			nand_cs_nand_xor;
 	u32			corr_stat_threshold;
 	u32			flash_dma_mode;
+	u32                     flash_edu_mode;
 	bool			pio_poll_mode;
 };
 
@@ -657,6 +714,22 @@ static inline void brcmnand_write_fc(struct brcmnand_controller *ctrl,
 	__raw_writel(val, ctrl->nand_fc + word * 4);
 }
 
+static inline void edu_writel(struct brcmnand_controller *ctrl,
+			      enum edu_reg reg, u32 val)
+{
+	u16 offs = ctrl->edu_offsets[reg];
+
+	brcmnand_writel(val, ctrl->edu_base + offs);
+}
+
+static inline u32 edu_readl(struct brcmnand_controller *ctrl,
+			    enum edu_reg reg)
+{
+	u16 offs = ctrl->edu_offsets[reg];
+
+	return brcmnand_readl(ctrl->edu_base + offs);
+}
+
 static void brcmnand_clear_ecc_addr(struct brcmnand_controller *ctrl)
 {
 
@@ -926,6 +999,16 @@ static inline bool has_flash_dma(struct brcmnand_controller *ctrl)
 	return ctrl->flash_dma_base;
 }
 
+static inline bool has_edu(struct brcmnand_controller *ctrl)
+{
+	return ctrl->edu_base;
+}
+
+static inline bool use_dma(struct brcmnand_controller *ctrl)
+{
+	return has_flash_dma(ctrl) || has_edu(ctrl);
+}
+
 static inline void disable_ctrl_irqs(struct brcmnand_controller *ctrl)
 {
 	if (ctrl->pio_poll_mode)
@@ -1299,6 +1382,52 @@ static int write_oob_to_regs(struct brcmnand_controller *ctrl, int i,
 	return tbytes;
 }
 
+static void brcmnand_edu_init(struct brcmnand_controller *ctrl)
+{
+	/* initialize edu */
+	edu_writel(ctrl, EDU_ERR_STATUS, 0);
+	edu_readl(ctrl, EDU_ERR_STATUS);
+	edu_writel(ctrl, EDU_DONE, 0);
+	edu_writel(ctrl, EDU_DONE, 0);
+	edu_writel(ctrl, EDU_DONE, 0);
+	edu_writel(ctrl, EDU_DONE, 0);
+	edu_readl(ctrl, EDU_DONE);
+}
+
+/* edu irq */
+static irqreturn_t brcmnand_edu_irq(int irq, void *data)
+{
+	struct brcmnand_controller *ctrl = data;
+
+	if (ctrl->edu_count) {
+		ctrl->edu_count--;
+		while (!(edu_readl(ctrl, EDU_DONE) & EDU_DONE_MASK))
+			udelay(1);
+		edu_writel(ctrl, EDU_DONE, 0);
+		edu_readl(ctrl, EDU_DONE);
+	}
+
+	if (ctrl->edu_count) {
+		ctrl->edu_dram_addr += FC_BYTES;
+		ctrl->edu_ext_addr += FC_BYTES;
+
+		edu_writel(ctrl, EDU_DRAM_ADDR, (u32)ctrl->edu_dram_addr);
+		edu_readl(ctrl, EDU_DRAM_ADDR);
+		edu_writel(ctrl, EDU_EXT_ADDR, ctrl->edu_ext_addr);
+		edu_readl(ctrl, EDU_EXT_ADDR);
+
+		mb(); /* flush previous writes */
+		edu_writel(ctrl, EDU_CMD, ctrl->edu_cmd);
+		edu_readl(ctrl, EDU_CMD);
+
+		return IRQ_HANDLED;
+	}
+
+	complete(&ctrl->edu_done);
+
+	return IRQ_HANDLED;
+}
+
 static irqreturn_t brcmnand_ctlrdy_irq(int irq, void *data)
 {
 	struct brcmnand_controller *ctrl = data;
@@ -1307,6 +1436,16 @@ static irqreturn_t brcmnand_ctlrdy_irq(int irq, void *data)
 	if (ctrl->dma_pending)
 		return IRQ_HANDLED;
 
+	/* check if you need to piggy back on the ctrlrdy irq */
+	if (ctrl->edu_pending) {
+		if (irq == ctrl->irq && ((int)ctrl->edu_irq >= 0))
+	/* Discard interrupts while using dedicated edu irq */
+			return IRQ_HANDLED;
+
+	/* no registered edu irq, call handler */
+		return brcmnand_edu_irq(irq, data);
+	}
+
 	complete(&ctrl->done);
 	return IRQ_HANDLED;
 }
@@ -1645,6 +1784,81 @@ static void brcmnand_write_buf(struct nand_chip *chip, const uint8_t *buf,
 }
 
 /**
+ *  Kick EDU engine
+ */
+static int brcmnand_edu_trans(struct brcmnand_host *host, u64 addr, u32 *buf,
+			      u32 len, u8 cmd)
+{
+	struct brcmnand_controller *ctrl = host->ctrl;
+	unsigned long timeo = msecs_to_jiffies(200);
+	int ret = 0;
+	int dir = (cmd == CMD_PAGE_READ ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
+	u8 edu_cmd = (cmd == CMD_PAGE_READ ? EDU_CMD_READ : EDU_CMD_WRITE);
+	unsigned int trans = len >> FC_SHIFT;
+	dma_addr_t pa;
+
+	pa = dma_map_single(ctrl->dev, buf, len, dir);
+	if (dma_mapping_error(ctrl->dev, pa)) {
+		dev_err(ctrl->dev, "unable to map buffer for EDU DMA\n");
+		return -ENOMEM;
+	}
+
+	ctrl->edu_pending = true;
+	ctrl->edu_dram_addr = pa;
+	ctrl->edu_ext_addr = addr;
+	ctrl->edu_cmd = edu_cmd;
+	ctrl->edu_count = trans;
+
+	edu_writel(ctrl, EDU_DRAM_ADDR, (u32)ctrl->edu_dram_addr);
+	edu_readl(ctrl,  EDU_DRAM_ADDR);
+	edu_writel(ctrl, EDU_EXT_ADDR, ctrl->edu_ext_addr);
+	edu_readl(ctrl, EDU_EXT_ADDR);
+	edu_writel(ctrl, EDU_LENGTH, FC_BYTES);
+	edu_readl(ctrl, EDU_LENGTH);
+
+	/* Start edu engine */
+	mb(); /* flush previous writes */
+	edu_writel(ctrl, EDU_CMD, ctrl->edu_cmd);
+	edu_readl(ctrl, EDU_CMD);
+
+	if (wait_for_completion_timeout(&ctrl->edu_done, timeo) <= 0) {
+		dev_err(ctrl->dev,
+			"timeout waiting for EDU; status %#x, error status %#x\n",
+			edu_readl(ctrl, EDU_STATUS),
+			edu_readl(ctrl, EDU_ERR_STATUS));
+	}
+
+	dma_unmap_single(ctrl->dev, pa, len, dir);
+
+	/* for program page check NAND status */
+	if (((brcmnand_read_reg(ctrl, BRCMNAND_INTFC_STATUS) &
+	      INTFC_FLASH_STATUS) & NAND_STATUS_FAIL) &&
+	    edu_cmd == EDU_CMD_WRITE) {
+		dev_info(ctrl->dev, "program failed at %llx\n",
+			 (unsigned long long)addr);
+		ret = -EIO;
+	}
+
+	/* Make sure the EDU status is clean */
+	if (edu_readl(ctrl, EDU_STATUS) & EDU_STATUS_ACTIVE)
+		dev_warn(ctrl->dev, "EDU still active: %#x\n",
+			 edu_readl(ctrl, EDU_STATUS));
+
+	if (unlikely(edu_readl(ctrl, EDU_ERR_STATUS) & EDU_ERR_STATUS_ERRACK)) {
+		dev_warn(ctrl->dev, "EDU RBUS error at addr %llx\n",
+			 (unsigned long long)addr);
+		ret = -EIO;
+	}
+
+	ctrl->edu_pending = false;
+	brcmnand_edu_init(ctrl);
+	edu_writel(ctrl, EDU_STOP, 0); /* force stop */
+	edu_readl(ctrl, EDU_STOP);
+
+	return ret;
+}
+
+/**
  * Construct a FLASH_DMA descriptor as part of a linked list. You must know the
  * following ahead of time:
  *  - Is this descriptor the beginning or end of a linked list?
@@ -1850,9 +2064,11 @@ static int brcmnand_read(struct mtd_info *mtd, struct nand_chip *chip,
 try_dmaread:
 	brcmnand_clear_ecc_addr(ctrl);
 
-	if (has_flash_dma(ctrl) && !oob && flash_dma_buf_ok(buf)) {
-		err = brcmnand_dma_trans(host, addr, buf, trans * FC_BYTES,
-					     CMD_PAGE_READ);
+	if (ctrl->dma_trans && !oob && flash_dma_buf_ok(buf)) {
+		err = ctrl->dma_trans(host, addr, buf,
+				      trans * FC_BYTES,
+				      CMD_PAGE_READ);
+
 		if (err) {
 			if (mtd_is_bitflip_or_eccerr(err))
 				err_addr = addr;
@@ -1988,10 +2204,12 @@ static int brcmnand_write(struct mtd_info *mtd, struct nand_chip *chip,
 	for (i = 0; i < ctrl->max_oob; i += 4)
 		oob_reg_write(ctrl, i, 0xffffffff);
 
-	if (has_flash_dma(ctrl) && !oob && flash_dma_buf_ok(buf)) {
-		if (brcmnand_dma_trans(host, addr, (u32 *)buf,
-					mtd->writesize, CMD_PROGRAM_PAGE))
+	if (use_dma(ctrl) && !oob && flash_dma_buf_ok(buf)) {
+		if (ctrl->dma_trans(host, addr, (u32 *)buf, mtd->writesize,
+				    CMD_PROGRAM_PAGE))
+
 			ret = -EIO;
+
 		goto out;
 	}
 
@@ -2494,6 +2712,8 @@ static int brcmnand_suspend(struct device *dev)
 
 	if (has_flash_dma(ctrl))
 		ctrl->flash_dma_mode = flash_dma_readl(ctrl, FLASH_DMA_MODE);
+	else if (has_edu(ctrl))
+		ctrl->edu_config = edu_readl(ctrl, EDU_CONFIG);
 
 	return 0;
 }
@@ -2508,6 +2728,14 @@ static int brcmnand_resume(struct device *dev)
 		flash_dma_writel(ctrl, FLASH_DMA_ERROR_STATUS, 0);
 	}
 
+	if (has_edu(ctrl))
+		ctrl->edu_config = edu_readl(ctrl, EDU_CONFIG);
+	else {
+		edu_writel(ctrl, EDU_CONFIG, ctrl->edu_config);
+		edu_readl(ctrl, EDU_CONFIG);
+		brcmnand_edu_init(ctrl);
+	}
+
 	brcmnand_write_reg(ctrl, BRCMNAND_CS_SELECT, ctrl->nand_cs_nand_select);
 	brcmnand_write_reg(ctrl, BRCMNAND_CS_XOR, ctrl->nand_cs_nand_xor);
 	brcmnand_write_reg(ctrl, BRCMNAND_CORR_THRESHOLD,
@@ -2553,6 +2781,49 @@ MODULE_DEVICE_TABLE(of, brcmnand_of_match);
 /***********************************************************************
  * Platform driver setup (per controller)
  ***********************************************************************/
+static int brcmnand_edu_setup(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct brcmnand_controller *ctrl = dev_get_drvdata(&pdev->dev);
+	struct resource *res;
+	int ret;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "flash-edu");
+	if (res) {
+		ctrl->edu_base = devm_ioremap_resource(dev, res);
+		if (IS_ERR(ctrl->edu_base))
+			return PTR_ERR(ctrl->edu_base);
+
+		ctrl->edu_offsets = edu_regs;
+
+		edu_writel(ctrl, EDU_CONFIG, EDU_CONFIG_MODE_NAND |
+			   EDU_CONFIG_SWAP_CFG);
+		edu_readl(ctrl, EDU_CONFIG);
+
+		/* initialize edu */
+		brcmnand_edu_init(ctrl);
+
+		ctrl->edu_irq = platform_get_irq_optional(pdev, 1);
+		if (ctrl->edu_irq < 0) {
+			dev_warn(dev,
+				 "FLASH EDU enabled, using ctlrdy irq\n");
+		} else {
+			ret = devm_request_irq(dev, ctrl->edu_irq,
+					       brcmnand_edu_irq, 0,
+					       "brcmnand-edu", ctrl);
+			if (ret < 0) {
+				dev_err(ctrl->dev, "can't allocate IRQ %d: error %d\n",
+					ctrl->edu_irq, ret);
+				return ret;
+			}
+
+			dev_info(dev, "FLASH EDU enabled using irq %u\n",
+				 ctrl->edu_irq);
+		}
+	}
+
+	return 0;
+}
 
 int brcmnand_probe(struct platform_device *pdev, struct brcmnand_soc *soc)
 {
@@ -2578,6 +2849,7 @@ int brcmnand_probe(struct platform_device *pdev, struct brcmnand_soc *soc)
 
 	init_completion(&ctrl->done);
 	init_completion(&ctrl->dma_done);
+	init_completion(&ctrl->edu_done);
 	nand_controller_init(&ctrl->controller);
 	ctrl->controller.ops = &brcmnand_controller_ops;
 	INIT_LIST_HEAD(&ctrl->host_list);
@@ -2675,6 +2947,15 @@ int brcmnand_probe(struct platform_device *pdev, struct brcmnand_soc *soc)
 		}
 
 		dev_info(dev, "enabling FLASH_DMA\n");
+		/* set flash dma transfer function to call */
+		ctrl->dma_trans = brcmnand_dma_trans;
+	} else	{
+		ret = brcmnand_edu_setup(pdev);
+		if (ret < 0)
+			goto err;
+
+		/* set edu transfer function to call */
+		ctrl->dma_trans = brcmnand_edu_trans;
 	}
 
 	/* Disable automatic device ID config, direct addressing */
diff --git a/drivers/mtd/nand/raw/cadence-nand-controller.c b/drivers/mtd/nand/raw/cadence-nand-controller.c
index f6c7102..efddc5c 100644
--- a/drivers/mtd/nand/raw/cadence-nand-controller.c
+++ b/drivers/mtd/nand/raw/cadence-nand-controller.c
@@ -30,7 +30,6 @@
  * Generic mode is used for executing rest of commands.
  */
 
-#define MAX_OOB_SIZE_PER_SECTOR	32
 #define MAX_ADDRESS_CYC		6
 #define MAX_ERASE_ADDRESS_CYC	3
 #define MAX_DATA_SIZE		0xFFFC
@@ -190,6 +189,7 @@
 
 /* BCH Engine identification register 3. */
 #define BCH_CFG_3				0x844
+#define		BCH_CFG_3_METADATA_SIZE		GENMASK(23, 16)
 
 /* Ready/Busy# line status. */
 #define RBN_SETINGS				0x1004
@@ -499,6 +499,7 @@ struct cdns_nand_ctrl {
 
 	unsigned long assigned_cs;
 	struct list_head chips;
+	u8 bch_metadata_size;
 };
 
 struct cdns_nand_chip {
@@ -997,6 +998,7 @@ static int cadence_nand_cdma_send(struct cdns_nand_ctrl *cdns_ctrl,
 		return status;
 
 	cadence_nand_reset_irq(cdns_ctrl);
+	reinit_completion(&cdns_ctrl->complete);
 
 	writel_relaxed((u32)cdns_ctrl->dma_cdma_desc,
 		       cdns_ctrl->reg + CMD_REG2);
@@ -1077,6 +1079,14 @@ static int cadence_nand_read_bch_caps(struct cdns_nand_ctrl *cdns_ctrl)
 	int max_step_size = 0, nstrengths, i;
 	u32 reg;
 
+	reg = readl_relaxed(cdns_ctrl->reg + BCH_CFG_3);
+	cdns_ctrl->bch_metadata_size = FIELD_GET(BCH_CFG_3_METADATA_SIZE, reg);
+	if (cdns_ctrl->bch_metadata_size < 4) {
+		dev_err(cdns_ctrl->dev,
+			"Driver needs at least 4 bytes of BCH meta data\n");
+		return -EIO;
+	}
+
 	reg = readl_relaxed(cdns_ctrl->reg + BCH_CFG_0);
 	cdns_ctrl->ecc_strengths[0] = FIELD_GET(BCH_CFG_0_CORR_CAP_0, reg);
 	cdns_ctrl->ecc_strengths[1] = FIELD_GET(BCH_CFG_0_CORR_CAP_1, reg);
@@ -1170,7 +1180,8 @@ static int cadence_nand_hw_init(struct cdns_nand_ctrl *cdns_ctrl)
 	writel_relaxed(0xFFFFFFFF, cdns_ctrl->reg + INTR_STATUS);
 
 	cadence_nand_get_caps(cdns_ctrl);
-	cadence_nand_read_bch_caps(cdns_ctrl);
+	if (cadence_nand_read_bch_caps(cdns_ctrl))
+		return -EIO;
 
 	/*
 	 * Set IO width access to 8.
@@ -2585,9 +2596,8 @@ int cadence_nand_attach_chip(struct nand_chip *chip)
 {
 	struct cdns_nand_ctrl *cdns_ctrl = to_cdns_nand_ctrl(chip->controller);
 	struct cdns_nand_chip *cdns_chip = to_cdns_nand_chip(chip);
-	u32 ecc_size = cdns_chip->sector_count * chip->ecc.bytes;
+	u32 ecc_size;
 	struct mtd_info *mtd = nand_to_mtd(chip);
-	u32 max_oob_data_size;
 	int ret;
 
 	if (chip->options & NAND_BUSWIDTH_16) {
@@ -2603,12 +2613,9 @@ int cadence_nand_attach_chip(struct nand_chip *chip)
 	chip->options |= NAND_NO_SUBPAGE_WRITE;
 
 	cdns_chip->bbm_offs = chip->badblockpos;
-	if (chip->options & NAND_BUSWIDTH_16) {
-		cdns_chip->bbm_offs &= ~0x01;
-		cdns_chip->bbm_len = 2;
-	} else {
-		cdns_chip->bbm_len = 1;
-	}
+	cdns_chip->bbm_offs &= ~0x01;
+	/* this value should be even number */
+	cdns_chip->bbm_len = 2;
 
 	ret = nand_ecc_choose_conf(chip,
 				   &cdns_ctrl->ecc_caps,
@@ -2625,13 +2632,12 @@ int cadence_nand_attach_chip(struct nand_chip *chip)
 	/* Error correction configuration. */
 	cdns_chip->sector_size = chip->ecc.size;
 	cdns_chip->sector_count = mtd->writesize / cdns_chip->sector_size;
+	ecc_size = cdns_chip->sector_count * chip->ecc.bytes;
 
 	cdns_chip->avail_oob_size = mtd->oobsize - ecc_size;
 
-	max_oob_data_size = MAX_OOB_SIZE_PER_SECTOR;
-
-	if (cdns_chip->avail_oob_size > max_oob_data_size)
-		cdns_chip->avail_oob_size = max_oob_data_size;
+	if (cdns_chip->avail_oob_size > cdns_ctrl->bch_metadata_size)
+		cdns_chip->avail_oob_size = cdns_ctrl->bch_metadata_size;
 
 	if ((cdns_chip->avail_oob_size + cdns_chip->bbm_len + ecc_size)
 	    > mtd->oobsize)
diff --git a/drivers/mtd/nand/raw/denali.c b/drivers/mtd/nand/raw/denali.c
index fafd0a0..6a6c919 100644
--- a/drivers/mtd/nand/raw/denali.c
+++ b/drivers/mtd/nand/raw/denali.c
@@ -1317,6 +1317,7 @@ int denali_init(struct denali_controller *denali)
 	iowrite32(CHIP_EN_DONT_CARE__FLAG, denali->reg + CHIP_ENABLE_DONT_CARE);
 	iowrite32(ECC_ENABLE__FLAG, denali->reg + ECC_ENABLE);
 	iowrite32(0xffff, denali->reg + SPARE_AREA_MARKER);
+	iowrite32(WRITE_PROTECT__FLAG, denali->reg + WRITE_PROTECT);
 
 	denali_clear_irq_all(denali);
 
diff --git a/drivers/mtd/nand/raw/denali.h b/drivers/mtd/nand/raw/denali.h
index e5cdcda..ac46eb7 100644
--- a/drivers/mtd/nand/raw/denali.h
+++ b/drivers/mtd/nand/raw/denali.h
@@ -328,7 +328,7 @@ struct denali_chip {
 	struct nand_chip chip;
 	struct list_head node;
 	unsigned int nsels;
-	struct denali_chip_sel sels[0];
+	struct denali_chip_sel sels[];
 };
 
 /**
diff --git a/drivers/mtd/nand/raw/diskonchip.c b/drivers/mtd/nand/raw/diskonchip.c
index c0e1a8e..c2a391a 100644
--- a/drivers/mtd/nand/raw/diskonchip.c
+++ b/drivers/mtd/nand/raw/diskonchip.c
@@ -1169,7 +1169,7 @@ static inline int __init inftl_partscan(struct mtd_info *mtd, struct mtd_partiti
 		"    NoOfBootImageBlocks   = %d\n"
 		"    NoOfBinaryPartitions  = %d\n"
 		"    NoOfBDTLPartitions    = %d\n"
-		"    BlockMultiplerBits    = %d\n"
+		"    BlockMultiplierBits   = %d\n"
 		"    FormatFlgs            = %d\n"
 		"    OsakVersion           = %d.%d.%d.%d\n"
 		"    PercentUsed           = %d\n",
@@ -1482,7 +1482,7 @@ static int __init doc_probe(unsigned long physadr)
 			break;
 		case DOC_ChipID_DocMilPlus32:
 			pr_err("DiskOnChip Millennium Plus 32MB is not supported, ignoring.\n");
-			/* fall through */
+			fallthrough;
 		default:
 			ret = -ENODEV;
 			goto notfound;
diff --git a/drivers/mtd/nand/raw/fsl_elbc_nand.c b/drivers/mtd/nand/raw/fsl_elbc_nand.c
index 634c550..e1dc675 100644
--- a/drivers/mtd/nand/raw/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/raw/fsl_elbc_nand.c
@@ -324,8 +324,7 @@ static void fsl_elbc_cmdfunc(struct nand_chip *chip, unsigned int command,
 	/* READ0 and READ1 read the entire buffer to use hardware ECC. */
 	case NAND_CMD_READ1:
 		column += 256;
-
-	/* fall-through */
+		fallthrough;
 	case NAND_CMD_READ0:
 		dev_dbg(priv->dev,
 		        "fsl_elbc_cmdfunc: NAND_CMD_READ0, page_addr:"
diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
index b9d5d55..53b00c8 100644
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
@@ -1148,20 +1148,21 @@ static int acquire_dma_channels(struct gpmi_nand_data *this)
 {
 	struct platform_device *pdev = this->pdev;
 	struct dma_chan *dma_chan;
+	int ret = 0;
 
 	/* request dma channel */
-	dma_chan = dma_request_slave_channel(&pdev->dev, "rx-tx");
-	if (!dma_chan) {
-		dev_err(this->dev, "Failed to request DMA channel.\n");
-		goto acquire_err;
+	dma_chan = dma_request_chan(&pdev->dev, "rx-tx");
+	if (IS_ERR(dma_chan)) {
+		ret = PTR_ERR(dma_chan);
+		if (ret != -EPROBE_DEFER)
+			dev_err(this->dev, "DMA channel request failed: %d\n",
+				ret);
+		release_dma_channels(this);
+	} else {
+		this->dma_chans[0] = dma_chan;
 	}
 
-	this->dma_chans[0] = dma_chan;
-	return 0;
-
-acquire_err:
-	release_dma_channels(this);
-	return -EINVAL;
+	return ret;
 }
 
 static int gpmi_get_clks(struct gpmi_nand_data *this)
diff --git a/drivers/mtd/nand/raw/ingenic/Kconfig b/drivers/mtd/nand/raw/ingenic/Kconfig
index e30feb5..96c5ae8 100644
--- a/drivers/mtd/nand/raw/ingenic/Kconfig
+++ b/drivers/mtd/nand/raw/ingenic/Kconfig
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 config MTD_NAND_JZ4780
 	tristate "JZ4780 NAND controller"
+	depends on MIPS || COMPILE_TEST
 	depends on JZ4780_NEMC
 	help
 	  Enables support for NAND Flash connected to the NEMC on JZ4780 SoC
diff --git a/drivers/mtd/nand/raw/ingenic/ingenic_ecc.c b/drivers/mtd/nand/raw/ingenic/ingenic_ecc.c
index c954189..8e22cd6 100644
--- a/drivers/mtd/nand/raw/ingenic/ingenic_ecc.c
+++ b/drivers/mtd/nand/raw/ingenic/ingenic_ecc.c
@@ -124,7 +124,6 @@ int ingenic_ecc_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct ingenic_ecc *ecc;
-	struct resource *res;
 
 	ecc = devm_kzalloc(dev, sizeof(*ecc), GFP_KERNEL);
 	if (!ecc)
@@ -134,8 +133,7 @@ int ingenic_ecc_probe(struct platform_device *pdev)
 	if (!ecc->ops)
 		return -EINVAL;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	ecc->base = devm_ioremap_resource(dev, res);
+	ecc->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(ecc->base))
 		return PTR_ERR(ecc->base);
 
diff --git a/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c b/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
index 49afebe..935c490 100644
--- a/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
+++ b/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
@@ -253,7 +253,7 @@ static int ingenic_nand_attach_chip(struct nand_chip *chip)
 		chip->ecc.hwctl = ingenic_nand_ecc_hwctl;
 		chip->ecc.calculate = ingenic_nand_ecc_calculate;
 		chip->ecc.correct = ingenic_nand_ecc_correct;
-		/* fall through */
+		fallthrough;
 	case NAND_ECC_SOFT:
 		dev_info(nfc->dev, "using %s (strength %d, size %d, bytes %d)\n",
 			 (nfc->ecc) ? "hardware ECC" : "software ECC",
diff --git a/drivers/mtd/nand/raw/ingenic/jz4725b_bch.c b/drivers/mtd/nand/raw/ingenic/jz4725b_bch.c
index 6c852ea..2d0e0a2 100644
--- a/drivers/mtd/nand/raw/ingenic/jz4725b_bch.c
+++ b/drivers/mtd/nand/raw/ingenic/jz4725b_bch.c
@@ -145,10 +145,10 @@ static void jz4725b_bch_read_parity(struct ingenic_ecc *bch, u8 *buf,
 	switch (size8) {
 	case 3:
 		dest8[2] = (val >> 16) & 0xff;
-		/* fall-through */
+		fallthrough;
 	case 2:
 		dest8[1] = (val >> 8) & 0xff;
-		/* fall-through */
+		fallthrough;
 	case 1:
 		dest8[0] = val & 0xff;
 		break;
diff --git a/drivers/mtd/nand/raw/ingenic/jz4780_bch.c b/drivers/mtd/nand/raw/ingenic/jz4780_bch.c
index 079266a..d67dbff 100644
--- a/drivers/mtd/nand/raw/ingenic/jz4780_bch.c
+++ b/drivers/mtd/nand/raw/ingenic/jz4780_bch.c
@@ -123,10 +123,10 @@ static void jz4780_bch_read_parity(struct ingenic_ecc *bch, void *buf,
 	switch (size8) {
 	case 3:
 		dest8[2] = (val >> 16) & 0xff;
-		/* fall through */
+		fallthrough;
 	case 2:
 		dest8[1] = (val >> 8) & 0xff;
-		/* fall through */
+		fallthrough;
 	case 1:
 		dest8[0] = val & 0xff;
 		break;
diff --git a/drivers/mtd/nand/raw/internals.h b/drivers/mtd/nand/raw/internals.h
index cba6fe7..9d0caad 100644
--- a/drivers/mtd/nand/raw/internals.h
+++ b/drivers/mtd/nand/raw/internals.h
@@ -30,6 +30,7 @@
 #define NAND_MFR_SAMSUNG	0xec
 #define NAND_MFR_SANDISK	0x45
 #define NAND_MFR_STMICRO	0x20
+/* Kioxia is new name of Toshiba memory. */
 #define NAND_MFR_TOSHIBA	0x98
 #define NAND_MFR_WINBOND	0xef
 
diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c
index fb5abdc..179f0ca 100644
--- a/drivers/mtd/nand/raw/marvell_nand.c
+++ b/drivers/mtd/nand/raw/marvell_nand.c
@@ -334,7 +334,7 @@ struct marvell_nand_chip {
 	int addr_cyc;
 	int selected_die;
 	unsigned int nsels;
-	struct marvell_nand_chip_sel sels[0];
+	struct marvell_nand_chip_sel sels[];
 };
 
 static inline struct marvell_nand_chip *to_marvell_nand(struct nand_chip *chip)
@@ -2743,16 +2743,21 @@ static int marvell_nfc_init_dma(struct marvell_nfc *nfc)
 	if (ret)
 		return ret;
 
-	nfc->dma_chan =	dma_request_slave_channel(nfc->dev, "data");
-	if (!nfc->dma_chan) {
-		dev_err(nfc->dev,
-			"Unable to request data DMA channel\n");
-		return -ENODEV;
+	nfc->dma_chan =	dma_request_chan(nfc->dev, "data");
+	if (IS_ERR(nfc->dma_chan)) {
+		ret = PTR_ERR(nfc->dma_chan);
+		nfc->dma_chan = NULL;
+		if (ret != -EPROBE_DEFER)
+			dev_err(nfc->dev, "DMA channel request failed: %d\n",
+				ret);
+		return ret;
 	}
 
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!r)
-		return -ENXIO;
+	if (!r) {
+		ret = -ENXIO;
+		goto release_channel;
+	}
 
 	config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
 	config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
@@ -2763,7 +2768,7 @@ static int marvell_nfc_init_dma(struct marvell_nfc *nfc)
 	ret = dmaengine_slave_config(nfc->dma_chan, &config);
 	if (ret < 0) {
 		dev_err(nfc->dev, "Failed to configure DMA channel\n");
-		return ret;
+		goto release_channel;
 	}
 
 	/*
@@ -2773,12 +2778,20 @@ static int marvell_nfc_init_dma(struct marvell_nfc *nfc)
 	 * the provided buffer.
 	 */
 	nfc->dma_buf = kmalloc(MAX_CHUNK_SIZE, GFP_KERNEL | GFP_DMA);
-	if (!nfc->dma_buf)
-		return -ENOMEM;
+	if (!nfc->dma_buf) {
+		ret = -ENOMEM;
+		goto release_channel;
+	}
 
 	nfc->use_dma = true;
 
 	return 0;
+
+release_channel:
+	dma_release_channel(nfc->dma_chan);
+	nfc->dma_chan = NULL;
+
+	return ret;
 }
 
 static void marvell_nfc_reset(struct marvell_nfc *nfc)
@@ -2920,10 +2933,13 @@ static int marvell_nfc_probe(struct platform_device *pdev)
 
 	ret = marvell_nand_chips_init(dev, nfc);
 	if (ret)
-		goto unprepare_reg_clk;
+		goto release_dma;
 
 	return 0;
 
+release_dma:
+	if (nfc->use_dma)
+		dma_release_channel(nfc->dma_chan);
 unprepare_reg_clk:
 	clk_disable_unprepare(nfc->reg_clk);
 unprepare_core_clk:
diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
index 9f17b5b..f6fb5c0 100644
--- a/drivers/mtd/nand/raw/meson_nand.c
+++ b/drivers/mtd/nand/raw/meson_nand.c
@@ -118,7 +118,7 @@ struct meson_nfc_nand_chip {
 	u8 *data_buf;
 	__le64 *info_buf;
 	u32 nsels;
-	u8 sels[0];
+	u8 sels[];
 };
 
 struct meson_nand_ecc {
diff --git a/drivers/mtd/nand/raw/mtk_nand.c b/drivers/mtd/nand/raw/mtk_nand.c
index b8305e3..ef149e8 100644
--- a/drivers/mtd/nand/raw/mtk_nand.c
+++ b/drivers/mtd/nand/raw/mtk_nand.c
@@ -131,7 +131,7 @@ struct mtk_nfc_nand_chip {
 	u32 spare_per_sector;
 
 	int nsels;
-	u8 sels[0];
+	u8 sels[];
 	/* nothing after this field */
 };
 
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index f64e3b6..c24e5e2 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -683,7 +683,12 @@ int nand_soft_waitrdy(struct nand_chip *chip, unsigned long timeout_ms)
 	if (ret)
 		return ret;
 
-	timeout_ms = jiffies + msecs_to_jiffies(timeout_ms);
+	/*
+	 * +1 below is necessary because if we are now in the last fraction
+	 * of jiffy and msecs_to_jiffies is 1 then we will wait only that
+	 * small jiffy fraction - possibly leading to false timeout
+	 */
+	timeout_ms = jiffies + msecs_to_jiffies(timeout_ms) + 1;
 	do {
 		ret = nand_read_data_op(chip, &status, sizeof(status), true);
 		if (ret)
@@ -4321,16 +4326,22 @@ static int nand_block_markbad(struct mtd_info *mtd, loff_t ofs)
 /**
  * nand_suspend - [MTD Interface] Suspend the NAND flash
  * @mtd: MTD device structure
+ *
+ * Returns 0 for success or negative error code otherwise.
  */
 static int nand_suspend(struct mtd_info *mtd)
 {
 	struct nand_chip *chip = mtd_to_nand(mtd);
+	int ret = 0;
 
 	mutex_lock(&chip->lock);
-	chip->suspended = 1;
+	if (chip->suspend)
+		ret = chip->suspend(chip);
+	if (!ret)
+		chip->suspended = 1;
 	mutex_unlock(&chip->lock);
 
-	return 0;
+	return ret;
 }
 
 /**
@@ -4342,11 +4353,14 @@ static void nand_resume(struct mtd_info *mtd)
 	struct nand_chip *chip = mtd_to_nand(mtd);
 
 	mutex_lock(&chip->lock);
-	if (chip->suspended)
+	if (chip->suspended) {
+		if (chip->resume)
+			chip->resume(chip);
 		chip->suspended = 0;
-	else
+	} else {
 		pr_err("%s called for a chip which is not in suspended state\n",
 			__func__);
+	}
 	mutex_unlock(&chip->lock);
 }
 
@@ -4360,6 +4374,38 @@ static void nand_shutdown(struct mtd_info *mtd)
 	nand_suspend(mtd);
 }
 
+/**
+ * nand_lock - [MTD Interface] Lock the NAND flash
+ * @mtd: MTD device structure
+ * @ofs: offset byte address
+ * @len: number of bytes to lock (must be a multiple of block/page size)
+ */
+static int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+
+	if (!chip->lock_area)
+		return -ENOTSUPP;
+
+	return chip->lock_area(chip, ofs, len);
+}
+
+/**
+ * nand_unlock - [MTD Interface] Unlock the NAND flash
+ * @mtd: MTD device structure
+ * @ofs: offset byte address
+ * @len: number of bytes to unlock (must be a multiple of block/page size)
+ */
+static int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+
+	if (!chip->unlock_area)
+		return -ENOTSUPP;
+
+	return chip->unlock_area(chip, ofs, len);
+}
+
 /* Set default functions */
 static void nand_set_defaults(struct nand_chip *chip)
 {
@@ -5591,8 +5637,7 @@ static int nand_scan_tail(struct nand_chip *chip)
 		}
 		if (!ecc->read_page)
 			ecc->read_page = nand_read_page_hwecc_oob_first;
-		/* fall through */
-
+		fallthrough;
 	case NAND_ECC_HW:
 		/* Use standard hwecc read page function? */
 		if (!ecc->read_page)
@@ -5611,8 +5656,7 @@ static int nand_scan_tail(struct nand_chip *chip)
 			ecc->read_subpage = nand_read_subpage;
 		if (!ecc->write_subpage && ecc->hwctl && ecc->calculate)
 			ecc->write_subpage = nand_write_subpage_hwecc;
-		/* fall through */
-
+		fallthrough;
 	case NAND_ECC_HW_SYNDROME:
 		if ((!ecc->calculate || !ecc->correct || !ecc->hwctl) &&
 		    (!ecc->read_page ||
@@ -5649,8 +5693,7 @@ static int nand_scan_tail(struct nand_chip *chip)
 			ecc->size, mtd->writesize);
 		ecc->mode = NAND_ECC_SOFT;
 		ecc->algo = NAND_ECC_HAMMING;
-		/* fall through */
-
+		fallthrough;
 	case NAND_ECC_SOFT:
 		ret = nand_set_ecc_soft_ops(chip);
 		if (ret) {
@@ -5786,8 +5829,8 @@ static int nand_scan_tail(struct nand_chip *chip)
 	mtd->_read_oob = nand_read_oob;
 	mtd->_write_oob = nand_write_oob;
 	mtd->_sync = nand_sync;
-	mtd->_lock = NULL;
-	mtd->_unlock = NULL;
+	mtd->_lock = nand_lock;
+	mtd->_unlock = nand_unlock;
 	mtd->_suspend = nand_suspend;
 	mtd->_resume = nand_resume;
 	mtd->_reboot = nand_shutdown;
@@ -5907,6 +5950,8 @@ void nand_cleanup(struct nand_chip *chip)
 	    chip->ecc.algo == NAND_ECC_BCH)
 		nand_bch_free((struct nand_bch_control *)chip->ecc.priv);
 
+	nanddev_cleanup(&chip->base);
+
 	/* Free bad block table memory */
 	kfree(chip->bbt);
 	kfree(chip->data_buf);
diff --git a/drivers/mtd/nand/raw/nand_hynix.c b/drivers/mtd/nand/raw/nand_hynix.c
index 194e422..7caedaa 100644
--- a/drivers/mtd/nand/raw/nand_hynix.c
+++ b/drivers/mtd/nand/raw/nand_hynix.c
@@ -26,7 +26,7 @@
 struct hynix_read_retry {
 	int nregs;
 	const u8 *regs;
-	u8 values[0];
+	u8 values[];
 };
 
 /**
diff --git a/drivers/mtd/nand/raw/nand_legacy.c b/drivers/mtd/nand/raw/nand_legacy.c
index f2526ec..f91e92e 100644
--- a/drivers/mtd/nand/raw/nand_legacy.c
+++ b/drivers/mtd/nand/raw/nand_legacy.c
@@ -331,8 +331,7 @@ static void nand_command(struct nand_chip *chip, unsigned int command,
 		 */
 		if (column == -1 && page_addr == -1)
 			return;
-		/* fall through */
-
+		fallthrough;
 	default:
 		/*
 		 * If we don't have access to the busy pin, we apply the given
@@ -483,8 +482,7 @@ static void nand_command_lp(struct nand_chip *chip, unsigned int command,
 				      NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE);
 		chip->legacy.cmd_ctrl(chip, NAND_CMD_NONE,
 				      NAND_NCE | NAND_CTRL_CHANGE);
-
-		/* fall through - This applies to read commands */
+		fallthrough;	/* This applies to read commands */
 	default:
 		/*
 		 * If we don't have access to the busy pin, we apply the given
diff --git a/drivers/mtd/nand/raw/nand_macronix.c b/drivers/mtd/nand/raw/nand_macronix.c
index 3ff7ce0..09c254c 100644
--- a/drivers/mtd/nand/raw/nand_macronix.c
+++ b/drivers/mtd/nand/raw/nand_macronix.c
@@ -6,11 +6,31 @@
  * Author: Boris Brezillon <boris.brezillon@free-electrons.com>
  */
 
+#include "linux/delay.h"
 #include "internals.h"
 
 #define MACRONIX_READ_RETRY_BIT BIT(0)
 #define MACRONIX_NUM_READ_RETRY_MODES 6
 
+#define ONFI_FEATURE_ADDR_MXIC_PROTECTION 0xA0
+#define MXIC_BLOCK_PROTECTION_ALL_LOCK 0x38
+#define MXIC_BLOCK_PROTECTION_ALL_UNLOCK 0x0
+
+#define ONFI_FEATURE_ADDR_MXIC_RANDOMIZER 0xB0
+#define MACRONIX_RANDOMIZER_BIT BIT(1)
+#define MACRONIX_RANDOMIZER_ENPGM BIT(0)
+#define MACRONIX_RANDOMIZER_RANDEN BIT(1)
+#define MACRONIX_RANDOMIZER_RANDOPT BIT(2)
+#define MACRONIX_RANDOMIZER_MODE_ENTER	\
+	(MACRONIX_RANDOMIZER_ENPGM |	\
+	 MACRONIX_RANDOMIZER_RANDEN |	\
+	 MACRONIX_RANDOMIZER_RANDOPT)
+#define MACRONIX_RANDOMIZER_MODE_EXIT	\
+	(MACRONIX_RANDOMIZER_RANDEN |	\
+	 MACRONIX_RANDOMIZER_RANDOPT)
+
+#define MXIC_CMD_POWER_DOWN 0xB9
+
 struct nand_onfi_vendor_macronix {
 	u8 reserved;
 	u8 reliability_func;
@@ -29,15 +49,83 @@ static int macronix_nand_setup_read_retry(struct nand_chip *chip, int mode)
 	return nand_set_features(chip, ONFI_FEATURE_ADDR_READ_RETRY, feature);
 }
 
+static int macronix_nand_randomizer_check_enable(struct nand_chip *chip)
+{
+	u8 feature[ONFI_SUBFEATURE_PARAM_LEN];
+	int ret;
+
+	ret = nand_get_features(chip, ONFI_FEATURE_ADDR_MXIC_RANDOMIZER,
+				feature);
+	if (ret < 0)
+		return ret;
+
+	if (feature[0])
+		return feature[0];
+
+	feature[0] = MACRONIX_RANDOMIZER_MODE_ENTER;
+	ret = nand_set_features(chip, ONFI_FEATURE_ADDR_MXIC_RANDOMIZER,
+				feature);
+	if (ret < 0)
+		return ret;
+
+	/* RANDEN and RANDOPT OTP bits are programmed */
+	feature[0] = 0x0;
+	ret = nand_prog_page_op(chip, 0, 0, feature, 1);
+	if (ret < 0)
+		return ret;
+
+	ret = nand_get_features(chip, ONFI_FEATURE_ADDR_MXIC_RANDOMIZER,
+				feature);
+	if (ret < 0)
+		return ret;
+
+	feature[0] &= MACRONIX_RANDOMIZER_MODE_EXIT;
+	ret = nand_set_features(chip, ONFI_FEATURE_ADDR_MXIC_RANDOMIZER,
+				feature);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
 static void macronix_nand_onfi_init(struct nand_chip *chip)
 {
 	struct nand_parameters *p = &chip->parameters;
 	struct nand_onfi_vendor_macronix *mxic;
+	struct device_node *dn = nand_get_flash_node(chip);
+	int rand_otp = 0;
+	int ret;
 
 	if (!p->onfi)
 		return;
 
+	if (of_find_property(dn, "mxic,enable-randomizer-otp", NULL))
+		rand_otp = 1;
+
 	mxic = (struct nand_onfi_vendor_macronix *)p->onfi->vendor;
+	/* Subpage write is prohibited in randomizer operatoin */
+	if (rand_otp && chip->options & NAND_NO_SUBPAGE_WRITE &&
+	    mxic->reliability_func & MACRONIX_RANDOMIZER_BIT) {
+		if (p->supports_set_get_features) {
+			bitmap_set(p->set_feature_list,
+				   ONFI_FEATURE_ADDR_MXIC_RANDOMIZER, 1);
+			bitmap_set(p->get_feature_list,
+				   ONFI_FEATURE_ADDR_MXIC_RANDOMIZER, 1);
+			ret = macronix_nand_randomizer_check_enable(chip);
+			if (ret < 0) {
+				bitmap_clear(p->set_feature_list,
+					     ONFI_FEATURE_ADDR_MXIC_RANDOMIZER,
+					     1);
+				bitmap_clear(p->get_feature_list,
+					     ONFI_FEATURE_ADDR_MXIC_RANDOMIZER,
+					     1);
+				pr_info("Macronix NAND randomizer failed\n");
+			} else {
+				pr_info("Macronix NAND randomizer enabled\n");
+			}
+		}
+	}
+
 	if ((mxic->reliability_func & MACRONIX_READ_RETRY_BIT) == 0)
 		return;
 
@@ -91,6 +179,143 @@ static void macronix_nand_fix_broken_get_timings(struct nand_chip *chip)
 		     ONFI_FEATURE_ADDR_TIMING_MODE, 1);
 }
 
+/*
+ * Macronix NAND supports Block Protection by Protectoin(PT) pin;
+ * active high at power-on which protects the entire chip even the #WP is
+ * disabled. Lock/unlock protection area can be partition according to
+ * protection bits, i.e. upper 1/2 locked, upper 1/4 locked and so on.
+ */
+static int mxic_nand_lock(struct nand_chip *chip, loff_t ofs, uint64_t len)
+{
+	u8 feature[ONFI_SUBFEATURE_PARAM_LEN];
+	int ret;
+
+	feature[0] = MXIC_BLOCK_PROTECTION_ALL_LOCK;
+	nand_select_target(chip, 0);
+	ret = nand_set_features(chip, ONFI_FEATURE_ADDR_MXIC_PROTECTION,
+				feature);
+	nand_deselect_target(chip);
+	if (ret)
+		pr_err("%s all blocks failed\n", __func__);
+
+	return ret;
+}
+
+static int mxic_nand_unlock(struct nand_chip *chip, loff_t ofs, uint64_t len)
+{
+	u8 feature[ONFI_SUBFEATURE_PARAM_LEN];
+	int ret;
+
+	feature[0] = MXIC_BLOCK_PROTECTION_ALL_UNLOCK;
+	nand_select_target(chip, 0);
+	ret = nand_set_features(chip, ONFI_FEATURE_ADDR_MXIC_PROTECTION,
+				feature);
+	nand_deselect_target(chip);
+	if (ret)
+		pr_err("%s all blocks failed\n", __func__);
+
+	return ret;
+}
+
+static void macronix_nand_block_protection_support(struct nand_chip *chip)
+{
+	u8 feature[ONFI_SUBFEATURE_PARAM_LEN];
+	int ret;
+
+	bitmap_set(chip->parameters.get_feature_list,
+		   ONFI_FEATURE_ADDR_MXIC_PROTECTION, 1);
+
+	feature[0] = MXIC_BLOCK_PROTECTION_ALL_UNLOCK;
+	nand_select_target(chip, 0);
+	ret = nand_get_features(chip, ONFI_FEATURE_ADDR_MXIC_PROTECTION,
+				feature);
+	nand_deselect_target(chip);
+	if (ret || feature[0] != MXIC_BLOCK_PROTECTION_ALL_LOCK) {
+		if (ret)
+			pr_err("Block protection check failed\n");
+
+		bitmap_clear(chip->parameters.get_feature_list,
+			     ONFI_FEATURE_ADDR_MXIC_PROTECTION, 1);
+		return;
+	}
+
+	bitmap_set(chip->parameters.set_feature_list,
+		   ONFI_FEATURE_ADDR_MXIC_PROTECTION, 1);
+
+	chip->lock_area = mxic_nand_lock;
+	chip->unlock_area = mxic_nand_unlock;
+}
+
+static int nand_power_down_op(struct nand_chip *chip)
+{
+	int ret;
+
+	if (nand_has_exec_op(chip)) {
+		struct nand_op_instr instrs[] = {
+			NAND_OP_CMD(MXIC_CMD_POWER_DOWN, 0),
+		};
+
+		struct nand_operation op = NAND_OPERATION(chip->cur_cs, instrs);
+
+		ret = nand_exec_op(chip, &op);
+		if (ret)
+			return ret;
+
+	} else {
+		chip->legacy.cmdfunc(chip, MXIC_CMD_POWER_DOWN, -1, -1);
+	}
+
+	return 0;
+}
+
+static int mxic_nand_suspend(struct nand_chip *chip)
+{
+	int ret;
+
+	nand_select_target(chip, 0);
+	ret = nand_power_down_op(chip);
+	if (ret < 0)
+		pr_err("Suspending MXIC NAND chip failed (%d)\n", ret);
+	nand_deselect_target(chip);
+
+	return ret;
+}
+
+static void mxic_nand_resume(struct nand_chip *chip)
+{
+	/*
+	 * Toggle #CS pin to resume NAND device and don't care
+	 * of the others CLE, #WE, #RE pins status.
+	 * A NAND controller ensure it is able to assert/de-assert #CS
+	 * by sending any byte over the NAND bus.
+	 * i.e.,
+	 * NAND power down command or reset command w/o R/B# status checking.
+	 */
+	nand_select_target(chip, 0);
+	nand_power_down_op(chip);
+	/* The minimum of a recovery time tRDP is 35 us */
+	usleep_range(35, 100);
+	nand_deselect_target(chip);
+}
+
+static void macronix_nand_deep_power_down_support(struct nand_chip *chip)
+{
+	int i;
+	static const char * const deep_power_down_dev[] = {
+		"MX30UF1G28AD",
+		"MX30UF2G28AD",
+		"MX30UF4G28AD",
+	};
+
+	i = match_string(deep_power_down_dev, ARRAY_SIZE(deep_power_down_dev),
+			 chip->parameters.model);
+	if (i < 0)
+		return;
+
+	chip->suspend = mxic_nand_suspend;
+	chip->resume = mxic_nand_resume;
+}
+
 static int macronix_nand_init(struct nand_chip *chip)
 {
 	if (nand_is_slc(chip))
@@ -98,6 +323,8 @@ static int macronix_nand_init(struct nand_chip *chip)
 
 	macronix_nand_fix_broken_get_timings(chip);
 	macronix_nand_onfi_init(chip);
+	macronix_nand_block_protection_support(chip);
+	macronix_nand_deep_power_down_support(chip);
 
 	return 0;
 }
diff --git a/drivers/mtd/nand/raw/nand_toshiba.c b/drivers/mtd/nand/raw/nand_toshiba.c
index 9c03fbb..f3dcd69 100644
--- a/drivers/mtd/nand/raw/nand_toshiba.c
+++ b/drivers/mtd/nand/raw/nand_toshiba.c
@@ -14,14 +14,68 @@
 /* Recommended to rewrite for BENAND */
 #define TOSHIBA_NAND_STATUS_REWRITE_RECOMMENDED	BIT(3)
 
+/* ECC Status Read Command for BENAND */
+#define TOSHIBA_NAND_CMD_ECC_STATUS_READ	0x7A
+
+/* ECC Status Mask for BENAND */
+#define TOSHIBA_NAND_ECC_STATUS_MASK		0x0F
+
+/* Uncorrectable Error for BENAND */
+#define TOSHIBA_NAND_ECC_STATUS_UNCORR		0x0F
+
+/* Max ECC Steps for BENAND */
+#define TOSHIBA_NAND_MAX_ECC_STEPS		8
+
+static int toshiba_nand_benand_read_eccstatus_op(struct nand_chip *chip,
+						 u8 *buf)
+{
+	u8 *ecc_status = buf;
+
+	if (nand_has_exec_op(chip)) {
+		const struct nand_sdr_timings *sdr =
+			nand_get_sdr_timings(&chip->data_interface);
+		struct nand_op_instr instrs[] = {
+			NAND_OP_CMD(TOSHIBA_NAND_CMD_ECC_STATUS_READ,
+				    PSEC_TO_NSEC(sdr->tADL_min)),
+			NAND_OP_8BIT_DATA_IN(chip->ecc.steps, ecc_status, 0),
+		};
+		struct nand_operation op = NAND_OPERATION(chip->cur_cs, instrs);
+
+		return nand_exec_op(chip, &op);
+	}
+
+	return -ENOTSUPP;
+}
+
 static int toshiba_nand_benand_eccstatus(struct nand_chip *chip)
 {
 	struct mtd_info *mtd = nand_to_mtd(chip);
 	int ret;
 	unsigned int max_bitflips = 0;
-	u8 status;
+	u8 status, ecc_status[TOSHIBA_NAND_MAX_ECC_STEPS];
 
 	/* Check Status */
+	ret = toshiba_nand_benand_read_eccstatus_op(chip, ecc_status);
+	if (!ret) {
+		unsigned int i, bitflips = 0;
+
+		for (i = 0; i < chip->ecc.steps; i++) {
+			bitflips = ecc_status[i] & TOSHIBA_NAND_ECC_STATUS_MASK;
+			if (bitflips == TOSHIBA_NAND_ECC_STATUS_UNCORR) {
+				mtd->ecc_stats.failed++;
+			} else {
+				mtd->ecc_stats.corrected += bitflips;
+				max_bitflips = max(max_bitflips, bitflips);
+			}
+		}
+
+		return max_bitflips;
+	}
+
+	/*
+	 * Fallback to regular status check if
+	 * toshiba_nand_benand_read_eccstatus_op() failed.
+	 */
 	ret = nand_status_op(chip, &status);
 	if (ret)
 		return ret;
@@ -108,7 +162,7 @@ static void toshiba_nand_decode_id(struct nand_chip *chip)
 	 */
 	if (chip->id.len >= 6 && nand_is_slc(chip) &&
 	    (chip->id.data[5] & 0x7) == 0x6 /* 24nm */ &&
-	    !(chip->id.data[4] & 0x80) /* !BENAND */) {
+	    !(chip->id.data[4] & TOSHIBA_NAND_ID4_IS_BENAND) /* !BENAND */) {
 		memorg->oobsize = 32 * memorg->pagesize >> 9;
 		mtd->oobsize = memorg->oobsize;
 	}
diff --git a/drivers/mtd/nand/raw/nandsim.c b/drivers/mtd/nand/raw/nandsim.c
index 9a70754..1de03bb 100644
--- a/drivers/mtd/nand/raw/nandsim.c
+++ b/drivers/mtd/nand/raw/nandsim.c
@@ -2251,10 +2251,10 @@ static int __init ns_init_module(void)
 	switch (bbt) {
 	case 2:
 		chip->bbt_options |= NAND_BBT_NO_OOB;
-		/* fall through */
+		fallthrough;
 	case 1:
 		chip->bbt_options |= NAND_BBT_USE_FLASH;
-		/* fall through */
+		fallthrough;
 	case 0:
 		break;
 	default:
diff --git a/drivers/mtd/nand/raw/omap_elm.c b/drivers/mtd/nand/raw/omap_elm.c
index 5502ffb..3fa0e2c 100644
--- a/drivers/mtd/nand/raw/omap_elm.c
+++ b/drivers/mtd/nand/raw/omap_elm.c
@@ -455,13 +455,13 @@ static int elm_context_save(struct elm_info *info)
 					ELM_SYNDROME_FRAGMENT_5 + offset);
 			regs->elm_syndrome_fragment_4[i] = elm_read_reg(info,
 					ELM_SYNDROME_FRAGMENT_4 + offset);
-			/* fall through */
+			fallthrough;
 		case BCH8_ECC:
 			regs->elm_syndrome_fragment_3[i] = elm_read_reg(info,
 					ELM_SYNDROME_FRAGMENT_3 + offset);
 			regs->elm_syndrome_fragment_2[i] = elm_read_reg(info,
 					ELM_SYNDROME_FRAGMENT_2 + offset);
-			/* fall through */
+			fallthrough;
 		case BCH4_ECC:
 			regs->elm_syndrome_fragment_1[i] = elm_read_reg(info,
 					ELM_SYNDROME_FRAGMENT_1 + offset);
@@ -503,13 +503,13 @@ static int elm_context_restore(struct elm_info *info)
 					regs->elm_syndrome_fragment_5[i]);
 			elm_write_reg(info, ELM_SYNDROME_FRAGMENT_4 + offset,
 					regs->elm_syndrome_fragment_4[i]);
-			/* fall through */
+			fallthrough;
 		case BCH8_ECC:
 			elm_write_reg(info, ELM_SYNDROME_FRAGMENT_3 + offset,
 					regs->elm_syndrome_fragment_3[i]);
 			elm_write_reg(info, ELM_SYNDROME_FRAGMENT_2 + offset,
 					regs->elm_syndrome_fragment_2[i]);
-			/* fall through */
+			fallthrough;
 		case BCH4_ECC:
 			elm_write_reg(info, ELM_SYNDROME_FRAGMENT_1 + offset,
 					regs->elm_syndrome_fragment_1[i]);
diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
index 7bb9a7e..5b11c70 100644
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -2628,6 +2628,29 @@ static const struct nand_controller_ops qcom_nandc_ops = {
 	.attach_chip = qcom_nand_attach_chip,
 };
 
+static void qcom_nandc_unalloc(struct qcom_nand_controller *nandc)
+{
+	if (nandc->props->is_bam) {
+		if (!dma_mapping_error(nandc->dev, nandc->reg_read_dma))
+			dma_unmap_single(nandc->dev, nandc->reg_read_dma,
+					 MAX_REG_RD *
+					 sizeof(*nandc->reg_read_buf),
+					 DMA_FROM_DEVICE);
+
+		if (nandc->tx_chan)
+			dma_release_channel(nandc->tx_chan);
+
+		if (nandc->rx_chan)
+			dma_release_channel(nandc->rx_chan);
+
+		if (nandc->cmd_chan)
+			dma_release_channel(nandc->cmd_chan);
+	} else {
+		if (nandc->chan)
+			dma_release_channel(nandc->chan);
+	}
+}
+
 static int qcom_nandc_alloc(struct qcom_nand_controller *nandc)
 {
 	int ret;
@@ -2673,22 +2696,37 @@ static int qcom_nandc_alloc(struct qcom_nand_controller *nandc)
 			return -EIO;
 		}
 
-		nandc->tx_chan = dma_request_slave_channel(nandc->dev, "tx");
-		if (!nandc->tx_chan) {
-			dev_err(nandc->dev, "failed to request tx channel\n");
-			return -ENODEV;
+		nandc->tx_chan = dma_request_chan(nandc->dev, "tx");
+		if (IS_ERR(nandc->tx_chan)) {
+			ret = PTR_ERR(nandc->tx_chan);
+			nandc->tx_chan = NULL;
+			if (ret != -EPROBE_DEFER)
+				dev_err(nandc->dev,
+					"tx DMA channel request failed: %d\n",
+					ret);
+			goto unalloc;
 		}
 
-		nandc->rx_chan = dma_request_slave_channel(nandc->dev, "rx");
-		if (!nandc->rx_chan) {
-			dev_err(nandc->dev, "failed to request rx channel\n");
-			return -ENODEV;
+		nandc->rx_chan = dma_request_chan(nandc->dev, "rx");
+		if (IS_ERR(nandc->rx_chan)) {
+			ret = PTR_ERR(nandc->rx_chan);
+			nandc->rx_chan = NULL;
+			if (ret != -EPROBE_DEFER)
+				dev_err(nandc->dev,
+					"rx DMA channel request failed: %d\n",
+					ret);
+			goto unalloc;
 		}
 
-		nandc->cmd_chan = dma_request_slave_channel(nandc->dev, "cmd");
-		if (!nandc->cmd_chan) {
-			dev_err(nandc->dev, "failed to request cmd channel\n");
-			return -ENODEV;
+		nandc->cmd_chan = dma_request_chan(nandc->dev, "cmd");
+		if (IS_ERR(nandc->cmd_chan)) {
+			ret = PTR_ERR(nandc->cmd_chan);
+			nandc->cmd_chan = NULL;
+			if (ret != -EPROBE_DEFER)
+				dev_err(nandc->dev,
+					"cmd DMA channel request failed: %d\n",
+					ret);
+			goto unalloc;
 		}
 
 		/*
@@ -2702,14 +2740,19 @@ static int qcom_nandc_alloc(struct qcom_nand_controller *nandc)
 		if (!nandc->bam_txn) {
 			dev_err(nandc->dev,
 				"failed to allocate bam transaction\n");
-			return -ENOMEM;
+			ret = -ENOMEM;
+			goto unalloc;
 		}
 	} else {
-		nandc->chan = dma_request_slave_channel(nandc->dev, "rxtx");
-		if (!nandc->chan) {
-			dev_err(nandc->dev,
-				"failed to request slave channel\n");
-			return -ENODEV;
+		nandc->chan = dma_request_chan(nandc->dev, "rxtx");
+		if (IS_ERR(nandc->chan)) {
+			ret = PTR_ERR(nandc->chan);
+			nandc->chan = NULL;
+			if (ret != -EPROBE_DEFER)
+				dev_err(nandc->dev,
+					"rxtx DMA channel request failed: %d\n",
+					ret);
+			return ret;
 		}
 	}
 
@@ -2720,29 +2763,9 @@ static int qcom_nandc_alloc(struct qcom_nand_controller *nandc)
 	nandc->controller.ops = &qcom_nandc_ops;
 
 	return 0;
-}
-
-static void qcom_nandc_unalloc(struct qcom_nand_controller *nandc)
-{
-	if (nandc->props->is_bam) {
-		if (!dma_mapping_error(nandc->dev, nandc->reg_read_dma))
-			dma_unmap_single(nandc->dev, nandc->reg_read_dma,
-					 MAX_REG_RD *
-					 sizeof(*nandc->reg_read_buf),
-					 DMA_FROM_DEVICE);
-
-		if (nandc->tx_chan)
-			dma_release_channel(nandc->tx_chan);
-
-		if (nandc->rx_chan)
-			dma_release_channel(nandc->rx_chan);
-
-		if (nandc->cmd_chan)
-			dma_release_channel(nandc->cmd_chan);
-	} else {
-		if (nandc->chan)
-			dma_release_channel(nandc->chan);
-	}
+unalloc:
+	qcom_nandc_unalloc(nandc);
+	return ret;
 }
 
 /* one time setup of a few nand controller registers */
diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
index 3ba73f1..b6d45cd 100644
--- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
+++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
@@ -1606,15 +1606,36 @@ static int stm32_fmc2_setup_interface(struct nand_chip *chip, int chipnr,
 /* DMA configuration */
 static int stm32_fmc2_dma_setup(struct stm32_fmc2_nfc *fmc2)
 {
-	int ret;
+	int ret = 0;
 
-	fmc2->dma_tx_ch = dma_request_slave_channel(fmc2->dev, "tx");
-	fmc2->dma_rx_ch = dma_request_slave_channel(fmc2->dev, "rx");
-	fmc2->dma_ecc_ch = dma_request_slave_channel(fmc2->dev, "ecc");
+	fmc2->dma_tx_ch = dma_request_chan(fmc2->dev, "tx");
+	if (IS_ERR(fmc2->dma_tx_ch)) {
+		ret = PTR_ERR(fmc2->dma_tx_ch);
+		if (ret != -ENODEV)
+			dev_err(fmc2->dev,
+				"failed to request tx DMA channel: %d\n", ret);
+		fmc2->dma_tx_ch = NULL;
+		goto err_dma;
+	}
 
-	if (!fmc2->dma_tx_ch || !fmc2->dma_rx_ch || !fmc2->dma_ecc_ch) {
-		dev_warn(fmc2->dev, "DMAs not defined in the device tree, polling mode is used\n");
-		return 0;
+	fmc2->dma_rx_ch = dma_request_chan(fmc2->dev, "rx");
+	if (IS_ERR(fmc2->dma_rx_ch)) {
+		ret = PTR_ERR(fmc2->dma_rx_ch);
+		if (ret != -ENODEV)
+			dev_err(fmc2->dev,
+				"failed to request rx DMA channel: %d\n", ret);
+		fmc2->dma_rx_ch = NULL;
+		goto err_dma;
+	}
+
+	fmc2->dma_ecc_ch = dma_request_chan(fmc2->dev, "ecc");
+	if (IS_ERR(fmc2->dma_ecc_ch)) {
+		ret = PTR_ERR(fmc2->dma_ecc_ch);
+		if (ret != -ENODEV)
+			dev_err(fmc2->dev,
+				"failed to request ecc DMA channel: %d\n", ret);
+		fmc2->dma_ecc_ch = NULL;
+		goto err_dma;
 	}
 
 	ret = sg_alloc_table(&fmc2->dma_ecc_sg, FMC2_MAX_SG, GFP_KERNEL);
@@ -1635,6 +1656,15 @@ static int stm32_fmc2_dma_setup(struct stm32_fmc2_nfc *fmc2)
 	init_completion(&fmc2->dma_ecc_complete);
 
 	return 0;
+
+err_dma:
+	if (ret == -ENODEV) {
+		dev_warn(fmc2->dev,
+			 "DMAs not defined in the DT, polling mode is used\n");
+		ret = 0;
+	}
+
+	return ret;
 }
 
 /* NAND callbacks setup */
diff --git a/drivers/mtd/nand/raw/sunxi_nand.c b/drivers/mtd/nand/raw/sunxi_nand.c
index 37a4ac0..5f3e40b 100644
--- a/drivers/mtd/nand/raw/sunxi_nand.c
+++ b/drivers/mtd/nand/raw/sunxi_nand.c
@@ -195,7 +195,7 @@ struct sunxi_nand_chip {
 	u32 timing_cfg;
 	u32 timing_ctl;
 	int nsels;
-	struct sunxi_nand_chip_sel sels[0];
+	struct sunxi_nand_chip_sel sels[];
 };
 
 static inline struct sunxi_nand_chip *to_sunxi_nand(struct nand_chip *nand)
@@ -2123,8 +2123,16 @@ static int sunxi_nfc_probe(struct platform_device *pdev)
 	if (ret)
 		goto out_ahb_reset_reassert;
 
-	nfc->dmac = dma_request_slave_channel(dev, "rxtx");
-	if (nfc->dmac) {
+	nfc->dmac = dma_request_chan(dev, "rxtx");
+	if (IS_ERR(nfc->dmac)) {
+		ret = PTR_ERR(nfc->dmac);
+		if (ret == -EPROBE_DEFER)
+			goto out_ahb_reset_reassert;
+
+		/* Ignore errors to fall back to PIO mode */
+		dev_warn(dev, "failed to request rxtx DMA channel: %d\n", ret);
+		nfc->dmac = NULL;
+	} else {
 		struct dma_slave_config dmac_cfg = { };
 
 		dmac_cfg.src_addr = r->start + nfc->caps->reg_io_data;
@@ -2138,9 +2146,6 @@ static int sunxi_nfc_probe(struct platform_device *pdev)
 		if (nfc->caps->extra_mbus_conf)
 			writel(readl(nfc->regs + NFC_REG_CTL) |
 			       NFC_DMA_TYPE_NORMAL, nfc->regs + NFC_REG_CTL);
-
-	} else {
-		dev_warn(dev, "failed to request rxtx DMA channel\n");
 	}
 
 	platform_set_drvdata(pdev, nfc);
diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index 89f6bee..b6bb358 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -16,6 +16,7 @@
 #include <linux/mtd/spinand.h>
 #include <linux/of.h>
 #include <linux/slab.h>
+#include <linux/string.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/spi-mem.h>
 
@@ -370,10 +371,11 @@ static int spinand_wait(struct spinand_device *spinand, u8 *s)
 	return status & STATUS_BUSY ? -ETIMEDOUT : 0;
 }
 
-static int spinand_read_id_op(struct spinand_device *spinand, u8 *buf)
+static int spinand_read_id_op(struct spinand_device *spinand, u8 naddr,
+			      u8 ndummy, u8 *buf)
 {
-	struct spi_mem_op op = SPINAND_READID_OP(0, spinand->scratchbuf,
-						 SPINAND_MAX_ID_LEN);
+	struct spi_mem_op op = SPINAND_READID_OP(
+		naddr, ndummy, spinand->scratchbuf, SPINAND_MAX_ID_LEN);
 	int ret;
 
 	ret = spi_mem_exec_op(spinand->spimem, &op);
@@ -568,18 +570,18 @@ static int spinand_mtd_write(struct mtd_info *mtd, loff_t to,
 static bool spinand_isbad(struct nand_device *nand, const struct nand_pos *pos)
 {
 	struct spinand_device *spinand = nand_to_spinand(nand);
+	u8 marker[2] = { };
 	struct nand_page_io_req req = {
 		.pos = *pos,
-		.ooblen = 2,
+		.ooblen = sizeof(marker),
 		.ooboffs = 0,
-		.oobbuf.in = spinand->oobbuf,
+		.oobbuf.in = marker,
 		.mode = MTD_OPS_RAW,
 	};
 
-	memset(spinand->oobbuf, 0, 2);
 	spinand_select_target(spinand, pos->target);
 	spinand_read_page(spinand, &req, false);
-	if (spinand->oobbuf[0] != 0xff || spinand->oobbuf[1] != 0xff)
+	if (marker[0] != 0xff || marker[1] != 0xff)
 		return true;
 
 	return false;
@@ -603,15 +605,16 @@ static int spinand_mtd_block_isbad(struct mtd_info *mtd, loff_t offs)
 static int spinand_markbad(struct nand_device *nand, const struct nand_pos *pos)
 {
 	struct spinand_device *spinand = nand_to_spinand(nand);
+	u8 marker[2] = { };
 	struct nand_page_io_req req = {
 		.pos = *pos,
 		.ooboffs = 0,
-		.ooblen = 2,
-		.oobbuf.out = spinand->oobbuf,
+		.ooblen = sizeof(marker),
+		.oobbuf.out = marker,
+		.mode = MTD_OPS_RAW,
 	};
 	int ret;
 
-	/* Erase block before marking it bad. */
 	ret = spinand_select_target(spinand, pos->target);
 	if (ret)
 		return ret;
@@ -620,9 +623,6 @@ static int spinand_markbad(struct nand_device *nand, const struct nand_pos *pos)
 	if (ret)
 		return ret;
 
-	spinand_erase_op(spinand, pos);
-
-	memset(spinand->oobbuf, 0, 2);
 	return spinand_write_page(spinand, &req);
 }
 
@@ -762,24 +762,62 @@ static const struct spinand_manufacturer *spinand_manufacturers[] = {
 	&winbond_spinand_manufacturer,
 };
 
-static int spinand_manufacturer_detect(struct spinand_device *spinand)
+static int spinand_manufacturer_match(struct spinand_device *spinand,
+				      enum spinand_readid_method rdid_method)
 {
+	u8 *id = spinand->id.data;
 	unsigned int i;
 	int ret;
 
 	for (i = 0; i < ARRAY_SIZE(spinand_manufacturers); i++) {
-		ret = spinand_manufacturers[i]->ops->detect(spinand);
-		if (ret > 0) {
-			spinand->manufacturer = spinand_manufacturers[i];
-			return 0;
-		} else if (ret < 0) {
-			return ret;
-		}
-	}
+		const struct spinand_manufacturer *manufacturer =
+			spinand_manufacturers[i];
 
+		if (id[0] != manufacturer->id)
+			continue;
+
+		ret = spinand_match_and_init(spinand,
+					     manufacturer->chips,
+					     manufacturer->nchips,
+					     rdid_method);
+		if (ret < 0)
+			continue;
+
+		spinand->manufacturer = manufacturer;
+		return 0;
+	}
 	return -ENOTSUPP;
 }
 
+static int spinand_id_detect(struct spinand_device *spinand)
+{
+	u8 *id = spinand->id.data;
+	int ret;
+
+	ret = spinand_read_id_op(spinand, 0, 0, id);
+	if (ret)
+		return ret;
+	ret = spinand_manufacturer_match(spinand, SPINAND_READID_METHOD_OPCODE);
+	if (!ret)
+		return 0;
+
+	ret = spinand_read_id_op(spinand, 1, 0, id);
+	if (ret)
+		return ret;
+	ret = spinand_manufacturer_match(spinand,
+					 SPINAND_READID_METHOD_OPCODE_ADDR);
+	if (!ret)
+		return 0;
+
+	ret = spinand_read_id_op(spinand, 0, 1, id);
+	if (ret)
+		return ret;
+	ret = spinand_manufacturer_match(spinand,
+					 SPINAND_READID_METHOD_OPCODE_DUMMY);
+
+	return ret;
+}
+
 static int spinand_manufacturer_init(struct spinand_device *spinand)
 {
 	if (spinand->manufacturer->ops->init)
@@ -835,9 +873,9 @@ spinand_select_op_variant(struct spinand_device *spinand,
  * @spinand: SPI NAND object
  * @table: SPI NAND device description table
  * @table_size: size of the device description table
+ * @rdid_method: read id method to match
  *
- * Should be used by SPI NAND manufacturer drivers when they want to find a
- * match between a device ID retrieved through the READ_ID command and an
+ * Match between a device ID retrieved through the READ_ID command and an
  * entry in the SPI NAND description table. If a match is found, the spinand
  * object will be initialized with information provided by the matching
  * spinand_info entry.
@@ -846,8 +884,10 @@ spinand_select_op_variant(struct spinand_device *spinand,
  */
 int spinand_match_and_init(struct spinand_device *spinand,
 			   const struct spinand_info *table,
-			   unsigned int table_size, u16 devid)
+			   unsigned int table_size,
+			   enum spinand_readid_method rdid_method)
 {
+	u8 *id = spinand->id.data;
 	struct nand_device *nand = spinand_to_nand(spinand);
 	unsigned int i;
 
@@ -855,13 +895,17 @@ int spinand_match_and_init(struct spinand_device *spinand,
 		const struct spinand_info *info = &table[i];
 		const struct spi_mem_op *op;
 
-		if (devid != info->devid)
+		if (rdid_method != info->devid.method)
+			continue;
+
+		if (memcmp(id + 1, info->devid.id, info->devid.len))
 			continue;
 
 		nand->memorg = table[i].memorg;
 		nand->eccreq = table[i].eccreq;
 		spinand->eccinfo = table[i].eccinfo;
 		spinand->flags = table[i].flags;
+		spinand->id.len = 1 + table[i].devid.len;
 		spinand->select_target = table[i].select_target;
 
 		op = spinand_select_op_variant(spinand,
@@ -898,13 +942,7 @@ static int spinand_detect(struct spinand_device *spinand)
 	if (ret)
 		return ret;
 
-	ret = spinand_read_id_op(spinand, spinand->id.data);
-	if (ret)
-		return ret;
-
-	spinand->id.len = SPINAND_MAX_ID_LEN;
-
-	ret = spinand_manufacturer_detect(spinand);
+	ret = spinand_id_detect(spinand);
 	if (ret) {
 		dev_err(dev, "unknown raw ID %*phN\n", SPINAND_MAX_ID_LEN,
 			spinand->id.data);
diff --git a/drivers/mtd/nand/spi/gigadevice.c b/drivers/mtd/nand/spi/gigadevice.c
index e99d425..d219c97 100644
--- a/drivers/mtd/nand/spi/gigadevice.c
+++ b/drivers/mtd/nand/spi/gigadevice.c
@@ -195,7 +195,8 @@ static int gd5fxgq4ufxxg_ecc_get_status(struct spinand_device *spinand,
 }
 
 static const struct spinand_info gigadevice_spinand_table[] = {
-	SPINAND_INFO("GD5F1GQ4xA", 0xF1,
+	SPINAND_INFO("GD5F1GQ4xA",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0xf1),
 		     NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
 		     NAND_ECCREQ(8, 512),
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
@@ -204,7 +205,8 @@ static const struct spinand_info gigadevice_spinand_table[] = {
 		     0,
 		     SPINAND_ECCINFO(&gd5fxgq4xa_ooblayout,
 				     gd5fxgq4xa_ecc_get_status)),
-	SPINAND_INFO("GD5F2GQ4xA", 0xF2,
+	SPINAND_INFO("GD5F2GQ4xA",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0xf2),
 		     NAND_MEMORG(1, 2048, 64, 64, 2048, 40, 1, 1, 1),
 		     NAND_ECCREQ(8, 512),
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
@@ -213,7 +215,8 @@ static const struct spinand_info gigadevice_spinand_table[] = {
 		     0,
 		     SPINAND_ECCINFO(&gd5fxgq4xa_ooblayout,
 				     gd5fxgq4xa_ecc_get_status)),
-	SPINAND_INFO("GD5F4GQ4xA", 0xF4,
+	SPINAND_INFO("GD5F4GQ4xA",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0xf4),
 		     NAND_MEMORG(1, 2048, 64, 64, 4096, 80, 1, 1, 1),
 		     NAND_ECCREQ(8, 512),
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
@@ -222,7 +225,8 @@ static const struct spinand_info gigadevice_spinand_table[] = {
 		     0,
 		     SPINAND_ECCINFO(&gd5fxgq4xa_ooblayout,
 				     gd5fxgq4xa_ecc_get_status)),
-	SPINAND_INFO("GD5F1GQ4UExxG", 0xd1,
+	SPINAND_INFO("GD5F1GQ4UExxG",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0xd1),
 		     NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
 		     NAND_ECCREQ(8, 512),
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
@@ -231,7 +235,8 @@ static const struct spinand_info gigadevice_spinand_table[] = {
 		     0,
 		     SPINAND_ECCINFO(&gd5fxgq4_variant2_ooblayout,
 				     gd5fxgq4uexxg_ecc_get_status)),
-	SPINAND_INFO("GD5F1GQ4UFxxG", 0xb148,
+	SPINAND_INFO("GD5F1GQ4UFxxG",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE, 0xb1, 0x48),
 		     NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
 		     NAND_ECCREQ(8, 512),
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants_f,
@@ -242,39 +247,13 @@ static const struct spinand_info gigadevice_spinand_table[] = {
 				     gd5fxgq4ufxxg_ecc_get_status)),
 };
 
-static int gigadevice_spinand_detect(struct spinand_device *spinand)
-{
-	u8 *id = spinand->id.data;
-	u16 did;
-	int ret;
-
-	/*
-	 * Earlier GDF5-series devices (A,E) return [0][MID][DID]
-	 * Later (F) devices return [MID][DID1][DID2]
-	 */
-
-	if (id[0] == SPINAND_MFR_GIGADEVICE)
-		did = (id[1] << 8) + id[2];
-	else if (id[0] == 0 && id[1] == SPINAND_MFR_GIGADEVICE)
-		did = id[2];
-	else
-		return 0;
-
-	ret = spinand_match_and_init(spinand, gigadevice_spinand_table,
-				     ARRAY_SIZE(gigadevice_spinand_table),
-				     did);
-	if (ret)
-		return ret;
-
-	return 1;
-}
-
 static const struct spinand_manufacturer_ops gigadevice_spinand_manuf_ops = {
-	.detect = gigadevice_spinand_detect,
 };
 
 const struct spinand_manufacturer gigadevice_spinand_manufacturer = {
 	.id = SPINAND_MFR_GIGADEVICE,
 	.name = "GigaDevice",
+	.chips = gigadevice_spinand_table,
+	.nchips = ARRAY_SIZE(gigadevice_spinand_table),
 	.ops = &gigadevice_spinand_manuf_ops,
 };
diff --git a/drivers/mtd/nand/spi/macronix.c b/drivers/mtd/nand/spi/macronix.c
index 21def3f..0f900f3 100644
--- a/drivers/mtd/nand/spi/macronix.c
+++ b/drivers/mtd/nand/spi/macronix.c
@@ -99,7 +99,8 @@ static int mx35lf1ge4ab_ecc_get_status(struct spinand_device *spinand,
 }
 
 static const struct spinand_info macronix_spinand_table[] = {
-	SPINAND_INFO("MX35LF1GE4AB", 0x12,
+	SPINAND_INFO("MX35LF1GE4AB",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x12),
 		     NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
 		     NAND_ECCREQ(4, 512),
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
@@ -108,7 +109,8 @@ static const struct spinand_info macronix_spinand_table[] = {
 		     SPINAND_HAS_QE_BIT,
 		     SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout,
 				     mx35lf1ge4ab_ecc_get_status)),
-	SPINAND_INFO("MX35LF2GE4AB", 0x22,
+	SPINAND_INFO("MX35LF2GE4AB",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x22),
 		     NAND_MEMORG(1, 2048, 64, 64, 2048, 40, 2, 1, 1),
 		     NAND_ECCREQ(4, 512),
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
@@ -118,33 +120,13 @@ static const struct spinand_info macronix_spinand_table[] = {
 		     SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout, NULL)),
 };
 
-static int macronix_spinand_detect(struct spinand_device *spinand)
-{
-	u8 *id = spinand->id.data;
-	int ret;
-
-	/*
-	 * Macronix SPI NAND read ID needs a dummy byte, so the first byte in
-	 * raw_id is garbage.
-	 */
-	if (id[1] != SPINAND_MFR_MACRONIX)
-		return 0;
-
-	ret = spinand_match_and_init(spinand, macronix_spinand_table,
-				     ARRAY_SIZE(macronix_spinand_table),
-				     id[2]);
-	if (ret)
-		return ret;
-
-	return 1;
-}
-
 static const struct spinand_manufacturer_ops macronix_spinand_manuf_ops = {
-	.detect = macronix_spinand_detect,
 };
 
 const struct spinand_manufacturer macronix_spinand_manufacturer = {
 	.id = SPINAND_MFR_MACRONIX,
 	.name = "Macronix",
+	.chips = macronix_spinand_table,
+	.nchips = ARRAY_SIZE(macronix_spinand_table),
 	.ops = &macronix_spinand_manuf_ops,
 };
diff --git a/drivers/mtd/nand/spi/micron.c b/drivers/mtd/nand/spi/micron.c
index 7d7b1f7..5d370cf 100644
--- a/drivers/mtd/nand/spi/micron.c
+++ b/drivers/mtd/nand/spi/micron.c
@@ -18,6 +18,16 @@
 #define MICRON_STATUS_ECC_4TO6_BITFLIPS	(3 << 4)
 #define MICRON_STATUS_ECC_7TO8_BITFLIPS	(5 << 4)
 
+#define MICRON_CFG_CR			BIT(0)
+
+/*
+ * As per datasheet, die selection is done by the 6th bit of Die
+ * Select Register (Address 0xD0).
+ */
+#define MICRON_DIE_SELECT_REG	0xD0
+
+#define MICRON_SELECT_DIE(x)	((x) << 6)
+
 static SPINAND_OP_VARIANTS(read_cache_variants,
 		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
 		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
@@ -34,38 +44,52 @@ static SPINAND_OP_VARIANTS(update_cache_variants,
 		SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
 		SPINAND_PROG_LOAD(false, 0, NULL, 0));
 
-static int mt29f2g01abagd_ooblayout_ecc(struct mtd_info *mtd, int section,
-					struct mtd_oob_region *region)
+static int micron_8_ooblayout_ecc(struct mtd_info *mtd, int section,
+				  struct mtd_oob_region *region)
 {
 	if (section)
 		return -ERANGE;
 
-	region->offset = 64;
-	region->length = 64;
+	region->offset = mtd->oobsize / 2;
+	region->length = mtd->oobsize / 2;
 
 	return 0;
 }
 
-static int mt29f2g01abagd_ooblayout_free(struct mtd_info *mtd, int section,
-					 struct mtd_oob_region *region)
+static int micron_8_ooblayout_free(struct mtd_info *mtd, int section,
+				   struct mtd_oob_region *region)
 {
 	if (section)
 		return -ERANGE;
 
 	/* Reserve 2 bytes for the BBM. */
 	region->offset = 2;
-	region->length = 62;
+	region->length = (mtd->oobsize / 2) - 2;
 
 	return 0;
 }
 
-static const struct mtd_ooblayout_ops mt29f2g01abagd_ooblayout = {
-	.ecc = mt29f2g01abagd_ooblayout_ecc,
-	.free = mt29f2g01abagd_ooblayout_free,
+static const struct mtd_ooblayout_ops micron_8_ooblayout = {
+	.ecc = micron_8_ooblayout_ecc,
+	.free = micron_8_ooblayout_free,
 };
 
-static int mt29f2g01abagd_ecc_get_status(struct spinand_device *spinand,
-					 u8 status)
+static int micron_select_target(struct spinand_device *spinand,
+				unsigned int target)
+{
+	struct spi_mem_op op = SPINAND_SET_FEATURE_OP(MICRON_DIE_SELECT_REG,
+						      spinand->scratchbuf);
+
+	if (target > 1)
+		return -EINVAL;
+
+	*spinand->scratchbuf = MICRON_SELECT_DIE(target);
+
+	return spi_mem_exec_op(spinand->spimem, &op);
+}
+
+static int micron_8_ecc_get_status(struct spinand_device *spinand,
+				   u8 status)
 {
 	switch (status & MICRON_STATUS_ECC_MASK) {
 	case STATUS_ECC_NO_BITFLIPS:
@@ -91,43 +115,131 @@ static int mt29f2g01abagd_ecc_get_status(struct spinand_device *spinand,
 }
 
 static const struct spinand_info micron_spinand_table[] = {
-	SPINAND_INFO("MT29F2G01ABAGD", 0x24,
+	/* M79A 2Gb 3.3V */
+	SPINAND_INFO("MT29F2G01ABAGD",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x24),
 		     NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 2, 1, 1),
 		     NAND_ECCREQ(8, 512),
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
 					      &write_cache_variants,
 					      &update_cache_variants),
 		     0,
-		     SPINAND_ECCINFO(&mt29f2g01abagd_ooblayout,
-				     mt29f2g01abagd_ecc_get_status)),
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status)),
+	/* M79A 2Gb 1.8V */
+	SPINAND_INFO("MT29F2G01ABBGD",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x25),
+		     NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 2, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status)),
+	/* M78A 1Gb 3.3V */
+	SPINAND_INFO("MT29F1G01ABAFD",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x14),
+		     NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status)),
+	/* M78A 1Gb 1.8V */
+	SPINAND_INFO("MT29F1G01ABAFD",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x15),
+		     NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status)),
+	/* M79A 4Gb 3.3V */
+	SPINAND_INFO("MT29F4G01ADAGD",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x36),
+		     NAND_MEMORG(1, 2048, 128, 64, 2048, 80, 2, 1, 2),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status),
+		     SPINAND_SELECT_TARGET(micron_select_target)),
+	/* M70A 4Gb 3.3V */
+	SPINAND_INFO("MT29F4G01ABAFD",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x34),
+		     NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     SPINAND_HAS_CR_FEAT_BIT,
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status)),
+	/* M70A 4Gb 1.8V */
+	SPINAND_INFO("MT29F4G01ABBFD",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x35),
+		     NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     SPINAND_HAS_CR_FEAT_BIT,
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status)),
+	/* M70A 8Gb 3.3V */
+	SPINAND_INFO("MT29F8G01ADAFD",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x46),
+		     NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 2),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     SPINAND_HAS_CR_FEAT_BIT,
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status),
+		     SPINAND_SELECT_TARGET(micron_select_target)),
+	/* M70A 8Gb 1.8V */
+	SPINAND_INFO("MT29F8G01ADBFD",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x47),
+		     NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 2),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     SPINAND_HAS_CR_FEAT_BIT,
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status),
+		     SPINAND_SELECT_TARGET(micron_select_target)),
 };
 
-static int micron_spinand_detect(struct spinand_device *spinand)
+static int micron_spinand_init(struct spinand_device *spinand)
 {
-	u8 *id = spinand->id.data;
-	int ret;
-
 	/*
-	 * Micron SPI NAND read ID need a dummy byte,
-	 * so the first byte in raw_id is dummy.
+	 * M70A device series enable Continuous Read feature at Power-up,
+	 * which is not supported. Disable this bit to avoid any possible
+	 * failure.
 	 */
-	if (id[1] != SPINAND_MFR_MICRON)
-		return 0;
+	if (spinand->flags & SPINAND_HAS_CR_FEAT_BIT)
+		return spinand_upd_cfg(spinand, MICRON_CFG_CR, 0);
 
-	ret = spinand_match_and_init(spinand, micron_spinand_table,
-				     ARRAY_SIZE(micron_spinand_table), id[2]);
-	if (ret)
-		return ret;
-
-	return 1;
+	return 0;
 }
 
 static const struct spinand_manufacturer_ops micron_spinand_manuf_ops = {
-	.detect = micron_spinand_detect,
+	.init = micron_spinand_init,
 };
 
 const struct spinand_manufacturer micron_spinand_manufacturer = {
 	.id = SPINAND_MFR_MICRON,
 	.name = "Micron",
+	.chips = micron_spinand_table,
+	.nchips = ARRAY_SIZE(micron_spinand_table),
 	.ops = &micron_spinand_manuf_ops,
 };
diff --git a/drivers/mtd/nand/spi/paragon.c b/drivers/mtd/nand/spi/paragon.c
index 5230768..519ade5 100644
--- a/drivers/mtd/nand/spi/paragon.c
+++ b/drivers/mtd/nand/spi/paragon.c
@@ -97,7 +97,8 @@ static const struct mtd_ooblayout_ops pn26g0xa_ooblayout = {
 
 
 static const struct spinand_info paragon_spinand_table[] = {
-	SPINAND_INFO("PN26G01A", 0xe1,
+	SPINAND_INFO("PN26G01A",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xe1),
 		     NAND_MEMORG(1, 2048, 128, 64, 1024, 21, 1, 1, 1),
 		     NAND_ECCREQ(8, 512),
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
@@ -106,7 +107,8 @@ static const struct spinand_info paragon_spinand_table[] = {
 		     0,
 		     SPINAND_ECCINFO(&pn26g0xa_ooblayout,
 				     pn26g0xa_ecc_get_status)),
-	SPINAND_INFO("PN26G02A", 0xe2,
+	SPINAND_INFO("PN26G02A",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xe2),
 		     NAND_MEMORG(1, 2048, 128, 64, 2048, 41, 1, 1, 1),
 		     NAND_ECCREQ(8, 512),
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
@@ -117,31 +119,13 @@ static const struct spinand_info paragon_spinand_table[] = {
 				     pn26g0xa_ecc_get_status)),
 };
 
-static int paragon_spinand_detect(struct spinand_device *spinand)
-{
-	u8 *id = spinand->id.data;
-	int ret;
-
-	/* Read ID returns [0][MID][DID] */
-
-	if (id[1] != SPINAND_MFR_PARAGON)
-		return 0;
-
-	ret = spinand_match_and_init(spinand, paragon_spinand_table,
-				     ARRAY_SIZE(paragon_spinand_table),
-				     id[2]);
-	if (ret)
-		return ret;
-
-	return 1;
-}
-
 static const struct spinand_manufacturer_ops paragon_spinand_manuf_ops = {
-	.detect = paragon_spinand_detect,
 };
 
 const struct spinand_manufacturer paragon_spinand_manufacturer = {
 	.id = SPINAND_MFR_PARAGON,
 	.name = "Paragon",
+	.chips = paragon_spinand_table,
+	.nchips = ARRAY_SIZE(paragon_spinand_table),
 	.ops = &paragon_spinand_manuf_ops,
 };
diff --git a/drivers/mtd/nand/spi/toshiba.c b/drivers/mtd/nand/spi/toshiba.c
index 0db5ee4..bc801d8 100644
--- a/drivers/mtd/nand/spi/toshiba.c
+++ b/drivers/mtd/nand/spi/toshiba.c
@@ -10,6 +10,7 @@
 #include <linux/kernel.h>
 #include <linux/mtd/spinand.h>
 
+/* Kioxia is new name of Toshiba memory. */
 #define SPINAND_MFR_TOSHIBA		0x98
 #define TOSH_STATUS_ECC_HAS_BITFLIPS_T	(3 << 4)
 
@@ -19,14 +20,26 @@ static SPINAND_OP_VARIANTS(read_cache_variants,
 		SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
 		SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
 
+static SPINAND_OP_VARIANTS(write_cache_x4_variants,
+		SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
+		SPINAND_PROG_LOAD(true, 0, NULL, 0));
+
+static SPINAND_OP_VARIANTS(update_cache_x4_variants,
+		SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
+		SPINAND_PROG_LOAD(false, 0, NULL, 0));
+
+/**
+ * Backward compatibility for 1st generation Serial NAND devices
+ * which don't support Quad Program Load operation.
+ */
 static SPINAND_OP_VARIANTS(write_cache_variants,
 		SPINAND_PROG_LOAD(true, 0, NULL, 0));
 
 static SPINAND_OP_VARIANTS(update_cache_variants,
 		SPINAND_PROG_LOAD(false, 0, NULL, 0));
 
-static int tc58cxgxsx_ooblayout_ecc(struct mtd_info *mtd, int section,
-				     struct mtd_oob_region *region)
+static int tx58cxgxsxraix_ooblayout_ecc(struct mtd_info *mtd, int section,
+					struct mtd_oob_region *region)
 {
 	if (section > 0)
 		return -ERANGE;
@@ -37,8 +50,8 @@ static int tc58cxgxsx_ooblayout_ecc(struct mtd_info *mtd, int section,
 	return 0;
 }
 
-static int tc58cxgxsx_ooblayout_free(struct mtd_info *mtd, int section,
-				      struct mtd_oob_region *region)
+static int tx58cxgxsxraix_ooblayout_free(struct mtd_info *mtd, int section,
+					 struct mtd_oob_region *region)
 {
 	if (section > 0)
 		return -ERANGE;
@@ -50,13 +63,13 @@ static int tc58cxgxsx_ooblayout_free(struct mtd_info *mtd, int section,
 	return 0;
 }
 
-static const struct mtd_ooblayout_ops tc58cxgxsx_ooblayout = {
-	.ecc = tc58cxgxsx_ooblayout_ecc,
-	.free = tc58cxgxsx_ooblayout_free,
+static const struct mtd_ooblayout_ops tx58cxgxsxraix_ooblayout = {
+	.ecc = tx58cxgxsxraix_ooblayout_ecc,
+	.free = tx58cxgxsxraix_ooblayout_free,
 };
 
-static int tc58cxgxsx_ecc_get_status(struct spinand_device *spinand,
-				      u8 status)
+static int tx58cxgxsxraix_ecc_get_status(struct spinand_device *spinand,
+					 u8 status)
 {
 	struct nand_device *nand = spinand_to_nand(spinand);
 	u8 mbf = 0;
@@ -94,105 +107,174 @@ static int tc58cxgxsx_ecc_get_status(struct spinand_device *spinand,
 }
 
 static const struct spinand_info toshiba_spinand_table[] = {
-	/* 3.3V 1Gb */
-	SPINAND_INFO("TC58CVG0S3", 0xC2,
+	/* 3.3V 1Gb (1st generation) */
+	SPINAND_INFO("TC58CVG0S3HRAIG",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xC2),
 		     NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
 		     NAND_ECCREQ(8, 512),
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
 					      &write_cache_variants,
 					      &update_cache_variants),
 		     0,
-		     SPINAND_ECCINFO(&tc58cxgxsx_ooblayout,
-				     tc58cxgxsx_ecc_get_status)),
-	/* 3.3V 2Gb */
-	SPINAND_INFO("TC58CVG1S3", 0xCB,
+		     SPINAND_ECCINFO(&tx58cxgxsxraix_ooblayout,
+				     tx58cxgxsxraix_ecc_get_status)),
+	/* 3.3V 2Gb (1st generation) */
+	SPINAND_INFO("TC58CVG1S3HRAIG",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xCB),
 		     NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
 		     NAND_ECCREQ(8, 512),
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
 					      &write_cache_variants,
 					      &update_cache_variants),
 		     0,
-		     SPINAND_ECCINFO(&tc58cxgxsx_ooblayout,
-				     tc58cxgxsx_ecc_get_status)),
-	/* 3.3V 4Gb */
-	SPINAND_INFO("TC58CVG2S0", 0xCD,
+		     SPINAND_ECCINFO(&tx58cxgxsxraix_ooblayout,
+				     tx58cxgxsxraix_ecc_get_status)),
+	/* 3.3V 4Gb (1st generation) */
+	SPINAND_INFO("TC58CVG2S0HRAIG",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xCD),
 		     NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
 		     NAND_ECCREQ(8, 512),
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
 					      &write_cache_variants,
 					      &update_cache_variants),
 		     0,
-		     SPINAND_ECCINFO(&tc58cxgxsx_ooblayout,
-				     tc58cxgxsx_ecc_get_status)),
-	/* 3.3V 4Gb */
-	SPINAND_INFO("TC58CVG2S0", 0xED,
-		     NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
-		     NAND_ECCREQ(8, 512),
-		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
-					      &write_cache_variants,
-					      &update_cache_variants),
-		     0,
-		     SPINAND_ECCINFO(&tc58cxgxsx_ooblayout,
-				     tc58cxgxsx_ecc_get_status)),
-	/* 1.8V 1Gb */
-	SPINAND_INFO("TC58CYG0S3", 0xB2,
+		     SPINAND_ECCINFO(&tx58cxgxsxraix_ooblayout,
+				     tx58cxgxsxraix_ecc_get_status)),
+	/* 1.8V 1Gb (1st generation) */
+	SPINAND_INFO("TC58CYG0S3HRAIG",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xB2),
 		     NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
 		     NAND_ECCREQ(8, 512),
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
 					      &write_cache_variants,
 					      &update_cache_variants),
 		     0,
-		     SPINAND_ECCINFO(&tc58cxgxsx_ooblayout,
-				     tc58cxgxsx_ecc_get_status)),
-	/* 1.8V 2Gb */
-	SPINAND_INFO("TC58CYG1S3", 0xBB,
+		     SPINAND_ECCINFO(&tx58cxgxsxraix_ooblayout,
+				     tx58cxgxsxraix_ecc_get_status)),
+	/* 1.8V 2Gb (1st generation) */
+	SPINAND_INFO("TC58CYG1S3HRAIG",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xBB),
 		     NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
 		     NAND_ECCREQ(8, 512),
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
 					      &write_cache_variants,
 					      &update_cache_variants),
 		     0,
-		     SPINAND_ECCINFO(&tc58cxgxsx_ooblayout,
-				     tc58cxgxsx_ecc_get_status)),
-	/* 1.8V 4Gb */
-	SPINAND_INFO("TC58CYG2S0", 0xBD,
+		     SPINAND_ECCINFO(&tx58cxgxsxraix_ooblayout,
+				     tx58cxgxsxraix_ecc_get_status)),
+	/* 1.8V 4Gb (1st generation) */
+	SPINAND_INFO("TC58CYG2S0HRAIG",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xBD),
 		     NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
 		     NAND_ECCREQ(8, 512),
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
 					      &write_cache_variants,
 					      &update_cache_variants),
 		     0,
-		     SPINAND_ECCINFO(&tc58cxgxsx_ooblayout,
-				     tc58cxgxsx_ecc_get_status)),
-};
-
-static int toshiba_spinand_detect(struct spinand_device *spinand)
-{
-	u8 *id = spinand->id.data;
-	int ret;
+		     SPINAND_ECCINFO(&tx58cxgxsxraix_ooblayout,
+				     tx58cxgxsxraix_ecc_get_status)),
 
 	/*
-	 * Toshiba SPI NAND read ID needs a dummy byte,
-	 * so the first byte in id is garbage.
+	 * 2nd generation serial nand has HOLD_D which is equivalent to
+	 * QE_BIT.
 	 */
-	if (id[1] != SPINAND_MFR_TOSHIBA)
-		return 0;
-
-	ret = spinand_match_and_init(spinand, toshiba_spinand_table,
-				     ARRAY_SIZE(toshiba_spinand_table),
-				     id[2]);
-	if (ret)
-		return ret;
-
-	return 1;
-}
+	/* 3.3V 1Gb (2nd generation) */
+	SPINAND_INFO("TC58CVG0S3HRAIJ",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xE2),
+		     NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_x4_variants,
+					      &update_cache_x4_variants),
+		     SPINAND_HAS_QE_BIT,
+		     SPINAND_ECCINFO(&tx58cxgxsxraix_ooblayout,
+				     tx58cxgxsxraix_ecc_get_status)),
+	/* 3.3V 2Gb (2nd generation) */
+	SPINAND_INFO("TC58CVG1S3HRAIJ",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xEB),
+		     NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_x4_variants,
+					      &update_cache_x4_variants),
+		     SPINAND_HAS_QE_BIT,
+		     SPINAND_ECCINFO(&tx58cxgxsxraix_ooblayout,
+				     tx58cxgxsxraix_ecc_get_status)),
+	/* 3.3V 4Gb (2nd generation) */
+	SPINAND_INFO("TC58CVG2S0HRAIJ",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xED),
+		     NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_x4_variants,
+					      &update_cache_x4_variants),
+		     SPINAND_HAS_QE_BIT,
+		     SPINAND_ECCINFO(&tx58cxgxsxraix_ooblayout,
+				     tx58cxgxsxraix_ecc_get_status)),
+	/* 3.3V 8Gb (2nd generation) */
+	SPINAND_INFO("TH58CVG3S0HRAIJ",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xE4),
+		     NAND_MEMORG(1, 4096, 256, 64, 4096, 80, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_x4_variants,
+					      &update_cache_x4_variants),
+		     SPINAND_HAS_QE_BIT,
+		     SPINAND_ECCINFO(&tx58cxgxsxraix_ooblayout,
+				     tx58cxgxsxraix_ecc_get_status)),
+	/* 1.8V 1Gb (2nd generation) */
+	SPINAND_INFO("TC58CYG0S3HRAIJ",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xD2),
+		     NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_x4_variants,
+					      &update_cache_x4_variants),
+		     SPINAND_HAS_QE_BIT,
+		     SPINAND_ECCINFO(&tx58cxgxsxraix_ooblayout,
+				     tx58cxgxsxraix_ecc_get_status)),
+	/* 1.8V 2Gb (2nd generation) */
+	SPINAND_INFO("TC58CYG1S3HRAIJ",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xDB),
+		     NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_x4_variants,
+					      &update_cache_x4_variants),
+		     SPINAND_HAS_QE_BIT,
+		     SPINAND_ECCINFO(&tx58cxgxsxraix_ooblayout,
+				     tx58cxgxsxraix_ecc_get_status)),
+	/* 1.8V 4Gb (2nd generation) */
+	SPINAND_INFO("TC58CYG2S0HRAIJ",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xDD),
+		     NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_x4_variants,
+					      &update_cache_x4_variants),
+		     SPINAND_HAS_QE_BIT,
+		     SPINAND_ECCINFO(&tx58cxgxsxraix_ooblayout,
+				     tx58cxgxsxraix_ecc_get_status)),
+	/* 1.8V 8Gb (2nd generation) */
+	SPINAND_INFO("TH58CYG3S0HRAIJ",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xD4),
+		     NAND_MEMORG(1, 4096, 256, 64, 4096, 80, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_x4_variants,
+					      &update_cache_x4_variants),
+		     SPINAND_HAS_QE_BIT,
+		     SPINAND_ECCINFO(&tx58cxgxsxraix_ooblayout,
+				     tx58cxgxsxraix_ecc_get_status)),
+};
 
 static const struct spinand_manufacturer_ops toshiba_spinand_manuf_ops = {
-	.detect = toshiba_spinand_detect,
 };
 
 const struct spinand_manufacturer toshiba_spinand_manufacturer = {
 	.id = SPINAND_MFR_TOSHIBA,
 	.name = "Toshiba",
+	.chips = toshiba_spinand_table,
+	.nchips = ARRAY_SIZE(toshiba_spinand_table),
 	.ops = &toshiba_spinand_manuf_ops,
 };
diff --git a/drivers/mtd/nand/spi/winbond.c b/drivers/mtd/nand/spi/winbond.c
index a6c17e0..7668442 100644
--- a/drivers/mtd/nand/spi/winbond.c
+++ b/drivers/mtd/nand/spi/winbond.c
@@ -75,7 +75,8 @@ static int w25m02gv_select_target(struct spinand_device *spinand,
 }
 
 static const struct spinand_info winbond_spinand_table[] = {
-	SPINAND_INFO("W25M02GV", 0xAB,
+	SPINAND_INFO("W25M02GV",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xab),
 		     NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 2),
 		     NAND_ECCREQ(1, 512),
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
@@ -84,7 +85,8 @@ static const struct spinand_info winbond_spinand_table[] = {
 		     0,
 		     SPINAND_ECCINFO(&w25m02gv_ooblayout, NULL),
 		     SPINAND_SELECT_TARGET(w25m02gv_select_target)),
-	SPINAND_INFO("W25N01GV", 0xAA,
+	SPINAND_INFO("W25N01GV",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xaa),
 		     NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
 		     NAND_ECCREQ(1, 512),
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
@@ -94,31 +96,6 @@ static const struct spinand_info winbond_spinand_table[] = {
 		     SPINAND_ECCINFO(&w25m02gv_ooblayout, NULL)),
 };
 
-/**
- * winbond_spinand_detect - initialize device related part in spinand_device
- * struct if it is a Winbond device.
- * @spinand: SPI NAND device structure
- */
-static int winbond_spinand_detect(struct spinand_device *spinand)
-{
-	u8 *id = spinand->id.data;
-	int ret;
-
-	/*
-	 * Winbond SPI NAND read ID need a dummy byte,
-	 * so the first byte in raw_id is dummy.
-	 */
-	if (id[1] != SPINAND_MFR_WINBOND)
-		return 0;
-
-	ret = spinand_match_and_init(spinand, winbond_spinand_table,
-				     ARRAY_SIZE(winbond_spinand_table), id[2]);
-	if (ret)
-		return ret;
-
-	return 1;
-}
-
 static int winbond_spinand_init(struct spinand_device *spinand)
 {
 	struct nand_device *nand = spinand_to_nand(spinand);
@@ -138,12 +115,13 @@ static int winbond_spinand_init(struct spinand_device *spinand)
 }
 
 static const struct spinand_manufacturer_ops winbond_spinand_manuf_ops = {
-	.detect = winbond_spinand_detect,
 	.init = winbond_spinand_init,
 };
 
 const struct spinand_manufacturer winbond_spinand_manufacturer = {
 	.id = SPINAND_MFR_WINBOND,
 	.name = "Winbond",
+	.chips = winbond_spinand_table,
+	.nchips = ARRAY_SIZE(winbond_spinand_table),
 	.ops = &winbond_spinand_manuf_ops,
 };
diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig
index 267b900..6e816ea 100644
--- a/drivers/mtd/spi-nor/Kconfig
+++ b/drivers/mtd/spi-nor/Kconfig
@@ -24,79 +24,6 @@
 	  Please note that some tools/drivers/filesystems may not work with
 	  4096 B erase size (e.g. UBIFS requires 15 KiB as a minimum).
 
-config SPI_ASPEED_SMC
-	tristate "Aspeed flash controllers in SPI mode"
-	depends on ARCH_ASPEED || COMPILE_TEST
-	depends on HAS_IOMEM && OF
-	help
-	  This enables support for the Firmware Memory controller (FMC)
-	  in the Aspeed AST2500/AST2400 SoCs when attached to SPI NOR chips,
-	  and support for the SPI flash memory controller (SPI) for
-	  the host firmware. The implementation only supports SPI NOR.
-
-config SPI_CADENCE_QUADSPI
-	tristate "Cadence Quad SPI controller"
-	depends on OF && (ARM || ARM64 || COMPILE_TEST)
-	help
-	  Enable support for the Cadence Quad SPI Flash controller.
-
-	  Cadence QSPI is a specialized controller for connecting an SPI
-	  Flash over 1/2/4-bit wide bus. Enable this option if you have a
-	  device with a Cadence QSPI controller and want to access the
-	  Flash as an MTD device.
-
-config SPI_HISI_SFC
-	tristate "Hisilicon FMC SPI-NOR Flash Controller(SFC)"
-	depends on ARCH_HISI || COMPILE_TEST
-	depends on HAS_IOMEM
-	help
-	  This enables support for HiSilicon FMC SPI-NOR flash controller.
-
-config SPI_NXP_SPIFI
-	tristate "NXP SPI Flash Interface (SPIFI)"
-	depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
-	depends on HAS_IOMEM
-	help
-	  Enable support for the NXP LPC SPI Flash Interface controller.
-
-	  SPIFI is a specialized controller for connecting serial SPI
-	  Flash. Enable this option if you have a device with a SPIFI
-	  controller and want to access the Flash as a mtd device.
-
-config SPI_INTEL_SPI
-	tristate
-
-config SPI_INTEL_SPI_PCI
-	tristate "Intel PCH/PCU SPI flash PCI driver (DANGEROUS)"
-	depends on X86 && PCI
-	select SPI_INTEL_SPI
-	help
-	  This enables PCI support for the Intel PCH/PCU SPI controller in
-	  master mode. This controller is present in modern Intel hardware
-	  and is used to hold BIOS and other persistent settings. Using
-	  this driver it is possible to upgrade BIOS directly from Linux.
-
-	  Say N here unless you know what you are doing. Overwriting the
-	  SPI flash may render the system unbootable.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called intel-spi-pci.
-
-config SPI_INTEL_SPI_PLATFORM
-	tristate "Intel PCH/PCU SPI flash platform driver (DANGEROUS)"
-	depends on X86
-	select SPI_INTEL_SPI
-	help
-	  This enables platform support for the Intel PCH/PCU SPI
-	  controller in master mode. This controller is present in modern
-	  Intel hardware and is used to hold BIOS and other persistent
-	  settings. Using this driver it is possible to upgrade BIOS
-	  directly from Linux.
-
-	  Say N here unless you know what you are doing. Overwriting the
-	  SPI flash may render the system unbootable.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called intel-spi-platform.
+source "drivers/mtd/spi-nor/controllers/Kconfig"
 
 endif # MTD_SPI_NOR
diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile
index 738dfd7..6539238 100644
--- a/drivers/mtd/spi-nor/Makefile
+++ b/drivers/mtd/spi-nor/Makefile
@@ -1,9 +1,22 @@
 # SPDX-License-Identifier: GPL-2.0
+
+spi-nor-objs			:= core.o sfdp.o
+spi-nor-objs			+= atmel.o
+spi-nor-objs			+= catalyst.o
+spi-nor-objs			+= eon.o
+spi-nor-objs			+= esmt.o
+spi-nor-objs			+= everspin.o
+spi-nor-objs			+= fujitsu.o
+spi-nor-objs			+= gigadevice.o
+spi-nor-objs			+= intel.o
+spi-nor-objs			+= issi.o
+spi-nor-objs			+= macronix.o
+spi-nor-objs			+= micron-st.o
+spi-nor-objs			+= spansion.o
+spi-nor-objs			+= sst.o
+spi-nor-objs			+= winbond.o
+spi-nor-objs			+= xilinx.o
+spi-nor-objs			+= xmc.o
 obj-$(CONFIG_MTD_SPI_NOR)	+= spi-nor.o
-obj-$(CONFIG_SPI_ASPEED_SMC)	+= aspeed-smc.o
-obj-$(CONFIG_SPI_CADENCE_QUADSPI)	+= cadence-quadspi.o
-obj-$(CONFIG_SPI_HISI_SFC)	+= hisi-sfc.o
-obj-$(CONFIG_SPI_NXP_SPIFI)	+= nxp-spifi.o
-obj-$(CONFIG_SPI_INTEL_SPI)	+= intel-spi.o
-obj-$(CONFIG_SPI_INTEL_SPI_PCI)	+= intel-spi-pci.o
-obj-$(CONFIG_SPI_INTEL_SPI_PLATFORM)	+= intel-spi-platform.o
+
+obj-$(CONFIG_MTD_SPI_NOR)	+= controllers/
diff --git a/drivers/mtd/spi-nor/aspeed-smc.c b/drivers/mtd/spi-nor/aspeed-smc.c
deleted file mode 100644
index 3951273..0000000
--- a/drivers/mtd/spi-nor/aspeed-smc.c
+++ /dev/null
@@ -1,910 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * ASPEED Static Memory Controller driver
- *
- * Copyright (c) 2015-2016, IBM Corporation.
- */
-
-#include <linux/bug.h>
-#include <linux/device.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/spi-nor.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
-#include <linux/sizes.h>
-#include <linux/sysfs.h>
-
-#define DEVICE_NAME	"aspeed-smc"
-
-/*
- * The driver only support SPI flash
- */
-enum aspeed_smc_flash_type {
-	smc_type_nor  = 0,
-	smc_type_nand = 1,
-	smc_type_spi  = 2,
-};
-
-struct aspeed_smc_chip;
-
-struct aspeed_smc_info {
-	u32 maxsize;		/* maximum size of chip window */
-	u8 nce;			/* number of chip enables */
-	bool hastype;		/* flash type field exists in config reg */
-	u8 we0;			/* shift for write enable bit for CE0 */
-	u8 ctl0;		/* offset in regs of ctl for CE0 */
-
-	void (*set_4b)(struct aspeed_smc_chip *chip);
-};
-
-static void aspeed_smc_chip_set_4b_spi_2400(struct aspeed_smc_chip *chip);
-static void aspeed_smc_chip_set_4b(struct aspeed_smc_chip *chip);
-
-static const struct aspeed_smc_info fmc_2400_info = {
-	.maxsize = 64 * 1024 * 1024,
-	.nce = 5,
-	.hastype = true,
-	.we0 = 16,
-	.ctl0 = 0x10,
-	.set_4b = aspeed_smc_chip_set_4b,
-};
-
-static const struct aspeed_smc_info spi_2400_info = {
-	.maxsize = 64 * 1024 * 1024,
-	.nce = 1,
-	.hastype = false,
-	.we0 = 0,
-	.ctl0 = 0x04,
-	.set_4b = aspeed_smc_chip_set_4b_spi_2400,
-};
-
-static const struct aspeed_smc_info fmc_2500_info = {
-	.maxsize = 256 * 1024 * 1024,
-	.nce = 3,
-	.hastype = true,
-	.we0 = 16,
-	.ctl0 = 0x10,
-	.set_4b = aspeed_smc_chip_set_4b,
-};
-
-static const struct aspeed_smc_info spi_2500_info = {
-	.maxsize = 128 * 1024 * 1024,
-	.nce = 2,
-	.hastype = false,
-	.we0 = 16,
-	.ctl0 = 0x10,
-	.set_4b = aspeed_smc_chip_set_4b,
-};
-
-enum aspeed_smc_ctl_reg_value {
-	smc_base,		/* base value without mode for other commands */
-	smc_read,		/* command reg for (maybe fast) reads */
-	smc_write,		/* command reg for writes */
-	smc_max,
-};
-
-struct aspeed_smc_controller;
-
-struct aspeed_smc_chip {
-	int cs;
-	struct aspeed_smc_controller *controller;
-	void __iomem *ctl;			/* control register */
-	void __iomem *ahb_base;			/* base of chip window */
-	u32 ahb_window_size;			/* chip mapping window size */
-	u32 ctl_val[smc_max];			/* control settings */
-	enum aspeed_smc_flash_type type;	/* what type of flash */
-	struct spi_nor nor;
-};
-
-struct aspeed_smc_controller {
-	struct device *dev;
-
-	struct mutex mutex;			/* controller access mutex */
-	const struct aspeed_smc_info *info;	/* type info of controller */
-	void __iomem *regs;			/* controller registers */
-	void __iomem *ahb_base;			/* per-chip windows resource */
-	u32 ahb_window_size;			/* full mapping window size */
-
-	struct aspeed_smc_chip *chips[0];	/* pointers to attached chips */
-};
-
-/*
- * SPI Flash Configuration Register (AST2500 SPI)
- *     or
- * Type setting Register (AST2500 FMC).
- * CE0 and CE1 can only be of type SPI. CE2 can be of type NOR but the
- * driver does not support it.
- */
-#define CONFIG_REG			0x0
-#define CONFIG_DISABLE_LEGACY		BIT(31) /* 1 */
-
-#define CONFIG_CE2_WRITE		BIT(18)
-#define CONFIG_CE1_WRITE		BIT(17)
-#define CONFIG_CE0_WRITE		BIT(16)
-
-#define CONFIG_CE2_TYPE			BIT(4) /* AST2500 FMC only */
-#define CONFIG_CE1_TYPE			BIT(2) /* AST2500 FMC only */
-#define CONFIG_CE0_TYPE			BIT(0) /* AST2500 FMC only */
-
-/*
- * CE Control Register
- */
-#define CE_CONTROL_REG			0x4
-
-/*
- * CEx Control Register
- */
-#define CONTROL_AAF_MODE		BIT(31)
-#define CONTROL_IO_MODE_MASK		GENMASK(30, 28)
-#define CONTROL_IO_DUAL_DATA		BIT(29)
-#define CONTROL_IO_DUAL_ADDR_DATA	(BIT(29) | BIT(28))
-#define CONTROL_IO_QUAD_DATA		BIT(30)
-#define CONTROL_IO_QUAD_ADDR_DATA	(BIT(30) | BIT(28))
-#define CONTROL_CE_INACTIVE_SHIFT	24
-#define CONTROL_CE_INACTIVE_MASK	GENMASK(27, \
-					CONTROL_CE_INACTIVE_SHIFT)
-/* 0 = 16T ... 15 = 1T   T=HCLK */
-#define CONTROL_COMMAND_SHIFT		16
-#define CONTROL_DUMMY_COMMAND_OUT	BIT(15)
-#define CONTROL_IO_DUMMY_HI		BIT(14)
-#define CONTROL_IO_DUMMY_HI_SHIFT	14
-#define CONTROL_CLK_DIV4		BIT(13) /* others */
-#define CONTROL_IO_ADDRESS_4B		BIT(13) /* AST2400 SPI */
-#define CONTROL_RW_MERGE		BIT(12)
-#define CONTROL_IO_DUMMY_LO_SHIFT	6
-#define CONTROL_IO_DUMMY_LO		GENMASK(7, \
-						CONTROL_IO_DUMMY_LO_SHIFT)
-#define CONTROL_IO_DUMMY_MASK		(CONTROL_IO_DUMMY_HI | \
-					 CONTROL_IO_DUMMY_LO)
-#define CONTROL_IO_DUMMY_SET(dummy)				 \
-	(((((dummy) >> 2) & 0x1) << CONTROL_IO_DUMMY_HI_SHIFT) | \
-	 (((dummy) & 0x3) << CONTROL_IO_DUMMY_LO_SHIFT))
-
-#define CONTROL_CLOCK_FREQ_SEL_SHIFT	8
-#define CONTROL_CLOCK_FREQ_SEL_MASK	GENMASK(11, \
-						CONTROL_CLOCK_FREQ_SEL_SHIFT)
-#define CONTROL_LSB_FIRST		BIT(5)
-#define CONTROL_CLOCK_MODE_3		BIT(4)
-#define CONTROL_IN_DUAL_DATA		BIT(3)
-#define CONTROL_CE_STOP_ACTIVE_CONTROL	BIT(2)
-#define CONTROL_COMMAND_MODE_MASK	GENMASK(1, 0)
-#define CONTROL_COMMAND_MODE_NORMAL	0
-#define CONTROL_COMMAND_MODE_FREAD	1
-#define CONTROL_COMMAND_MODE_WRITE	2
-#define CONTROL_COMMAND_MODE_USER	3
-
-#define CONTROL_KEEP_MASK						\
-	(CONTROL_AAF_MODE | CONTROL_CE_INACTIVE_MASK | CONTROL_CLK_DIV4 | \
-	 CONTROL_CLOCK_FREQ_SEL_MASK | CONTROL_LSB_FIRST | CONTROL_CLOCK_MODE_3)
-
-/*
- * The Segment Register uses a 8MB unit to encode the start address
- * and the end address of the mapping window of a flash SPI slave :
- *
- *        | byte 1 | byte 2 | byte 3 | byte 4 |
- *        +--------+--------+--------+--------+
- *        |  end   |  start |   0    |   0    |
- */
-#define SEGMENT_ADDR_REG0		0x30
-#define SEGMENT_ADDR_START(_r)		((((_r) >> 16) & 0xFF) << 23)
-#define SEGMENT_ADDR_END(_r)		((((_r) >> 24) & 0xFF) << 23)
-#define SEGMENT_ADDR_VALUE(start, end)					\
-	(((((start) >> 23) & 0xFF) << 16) | ((((end) >> 23) & 0xFF) << 24))
-#define SEGMENT_ADDR_REG(controller, cs)	\
-	((controller)->regs + SEGMENT_ADDR_REG0 + (cs) * 4)
-
-/*
- * In user mode all data bytes read or written to the chip decode address
- * range are transferred to or from the SPI bus. The range is treated as a
- * fifo of arbitratry 1, 2, or 4 byte width but each write has to be aligned
- * to its size. The address within the multiple 8kB range is ignored when
- * sending bytes to the SPI bus.
- *
- * On the arm architecture, as of Linux version 4.3, memcpy_fromio and
- * memcpy_toio on little endian targets use the optimized memcpy routines
- * that were designed for well behavied memory storage. These routines
- * have a stutter if the source and destination are not both word aligned,
- * once with a duplicate access to the source after aligning to the
- * destination to a word boundary, and again with a duplicate access to
- * the source when the final byte count is not word aligned.
- *
- * When writing or reading the fifo this stutter discards data or sends
- * too much data to the fifo and can not be used by this driver.
- *
- * While the low level io string routines that implement the insl family do
- * the desired accesses and memory increments, the cross architecture io
- * macros make them essentially impossible to use on a memory mapped address
- * instead of a a token from the call to iomap of an io port.
- *
- * These fifo routines use readl and friends to a constant io port and update
- * the memory buffer pointer and count via explicit code. The final updates
- * to len are optimistically suppressed.
- */
-static int aspeed_smc_read_from_ahb(void *buf, void __iomem *src, size_t len)
-{
-	size_t offset = 0;
-
-	if (IS_ALIGNED((uintptr_t)src, sizeof(uintptr_t)) &&
-	    IS_ALIGNED((uintptr_t)buf, sizeof(uintptr_t))) {
-		ioread32_rep(src, buf, len >> 2);
-		offset = len & ~0x3;
-		len -= offset;
-	}
-	ioread8_rep(src, (u8 *)buf + offset, len);
-	return 0;
-}
-
-static int aspeed_smc_write_to_ahb(void __iomem *dst, const void *buf,
-				   size_t len)
-{
-	size_t offset = 0;
-
-	if (IS_ALIGNED((uintptr_t)dst, sizeof(uintptr_t)) &&
-	    IS_ALIGNED((uintptr_t)buf, sizeof(uintptr_t))) {
-		iowrite32_rep(dst, buf, len >> 2);
-		offset = len & ~0x3;
-		len -= offset;
-	}
-	iowrite8_rep(dst, (const u8 *)buf + offset, len);
-	return 0;
-}
-
-static inline u32 aspeed_smc_chip_write_bit(struct aspeed_smc_chip *chip)
-{
-	return BIT(chip->controller->info->we0 + chip->cs);
-}
-
-static void aspeed_smc_chip_check_config(struct aspeed_smc_chip *chip)
-{
-	struct aspeed_smc_controller *controller = chip->controller;
-	u32 reg;
-
-	reg = readl(controller->regs + CONFIG_REG);
-
-	if (reg & aspeed_smc_chip_write_bit(chip))
-		return;
-
-	dev_dbg(controller->dev, "config write is not set ! @%p: 0x%08x\n",
-		controller->regs + CONFIG_REG, reg);
-	reg |= aspeed_smc_chip_write_bit(chip);
-	writel(reg, controller->regs + CONFIG_REG);
-}
-
-static void aspeed_smc_start_user(struct spi_nor *nor)
-{
-	struct aspeed_smc_chip *chip = nor->priv;
-	u32 ctl = chip->ctl_val[smc_base];
-
-	/*
-	 * When the chip is controlled in user mode, we need write
-	 * access to send the opcodes to it. So check the config.
-	 */
-	aspeed_smc_chip_check_config(chip);
-
-	ctl |= CONTROL_COMMAND_MODE_USER |
-		CONTROL_CE_STOP_ACTIVE_CONTROL;
-	writel(ctl, chip->ctl);
-
-	ctl &= ~CONTROL_CE_STOP_ACTIVE_CONTROL;
-	writel(ctl, chip->ctl);
-}
-
-static void aspeed_smc_stop_user(struct spi_nor *nor)
-{
-	struct aspeed_smc_chip *chip = nor->priv;
-
-	u32 ctl = chip->ctl_val[smc_read];
-	u32 ctl2 = ctl | CONTROL_COMMAND_MODE_USER |
-		CONTROL_CE_STOP_ACTIVE_CONTROL;
-
-	writel(ctl2, chip->ctl);	/* stop user CE control */
-	writel(ctl, chip->ctl);		/* default to fread or read mode */
-}
-
-static int aspeed_smc_prep(struct spi_nor *nor)
-{
-	struct aspeed_smc_chip *chip = nor->priv;
-
-	mutex_lock(&chip->controller->mutex);
-	return 0;
-}
-
-static void aspeed_smc_unprep(struct spi_nor *nor)
-{
-	struct aspeed_smc_chip *chip = nor->priv;
-
-	mutex_unlock(&chip->controller->mutex);
-}
-
-static int aspeed_smc_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf,
-			       size_t len)
-{
-	struct aspeed_smc_chip *chip = nor->priv;
-
-	aspeed_smc_start_user(nor);
-	aspeed_smc_write_to_ahb(chip->ahb_base, &opcode, 1);
-	aspeed_smc_read_from_ahb(buf, chip->ahb_base, len);
-	aspeed_smc_stop_user(nor);
-	return 0;
-}
-
-static int aspeed_smc_write_reg(struct spi_nor *nor, u8 opcode, const u8 *buf,
-				size_t len)
-{
-	struct aspeed_smc_chip *chip = nor->priv;
-
-	aspeed_smc_start_user(nor);
-	aspeed_smc_write_to_ahb(chip->ahb_base, &opcode, 1);
-	aspeed_smc_write_to_ahb(chip->ahb_base, buf, len);
-	aspeed_smc_stop_user(nor);
-	return 0;
-}
-
-static void aspeed_smc_send_cmd_addr(struct spi_nor *nor, u8 cmd, u32 addr)
-{
-	struct aspeed_smc_chip *chip = nor->priv;
-	__be32 temp;
-	u32 cmdaddr;
-
-	switch (nor->addr_width) {
-	default:
-		WARN_ONCE(1, "Unexpected address width %u, defaulting to 3\n",
-			  nor->addr_width);
-		/* FALLTHROUGH */
-	case 3:
-		cmdaddr = addr & 0xFFFFFF;
-		cmdaddr |= cmd << 24;
-
-		temp = cpu_to_be32(cmdaddr);
-		aspeed_smc_write_to_ahb(chip->ahb_base, &temp, 4);
-		break;
-	case 4:
-		temp = cpu_to_be32(addr);
-		aspeed_smc_write_to_ahb(chip->ahb_base, &cmd, 1);
-		aspeed_smc_write_to_ahb(chip->ahb_base, &temp, 4);
-		break;
-	}
-}
-
-static ssize_t aspeed_smc_read_user(struct spi_nor *nor, loff_t from,
-				    size_t len, u_char *read_buf)
-{
-	struct aspeed_smc_chip *chip = nor->priv;
-	int i;
-	u8 dummy = 0xFF;
-
-	aspeed_smc_start_user(nor);
-	aspeed_smc_send_cmd_addr(nor, nor->read_opcode, from);
-	for (i = 0; i < chip->nor.read_dummy / 8; i++)
-		aspeed_smc_write_to_ahb(chip->ahb_base, &dummy, sizeof(dummy));
-
-	aspeed_smc_read_from_ahb(read_buf, chip->ahb_base, len);
-	aspeed_smc_stop_user(nor);
-	return len;
-}
-
-static ssize_t aspeed_smc_write_user(struct spi_nor *nor, loff_t to,
-				     size_t len, const u_char *write_buf)
-{
-	struct aspeed_smc_chip *chip = nor->priv;
-
-	aspeed_smc_start_user(nor);
-	aspeed_smc_send_cmd_addr(nor, nor->program_opcode, to);
-	aspeed_smc_write_to_ahb(chip->ahb_base, write_buf, len);
-	aspeed_smc_stop_user(nor);
-	return len;
-}
-
-static int aspeed_smc_unregister(struct aspeed_smc_controller *controller)
-{
-	struct aspeed_smc_chip *chip;
-	int n;
-
-	for (n = 0; n < controller->info->nce; n++) {
-		chip = controller->chips[n];
-		if (chip)
-			mtd_device_unregister(&chip->nor.mtd);
-	}
-
-	return 0;
-}
-
-static int aspeed_smc_remove(struct platform_device *dev)
-{
-	return aspeed_smc_unregister(platform_get_drvdata(dev));
-}
-
-static const struct of_device_id aspeed_smc_matches[] = {
-	{ .compatible = "aspeed,ast2400-fmc", .data = &fmc_2400_info },
-	{ .compatible = "aspeed,ast2400-spi", .data = &spi_2400_info },
-	{ .compatible = "aspeed,ast2500-fmc", .data = &fmc_2500_info },
-	{ .compatible = "aspeed,ast2500-spi", .data = &spi_2500_info },
-	{ }
-};
-MODULE_DEVICE_TABLE(of, aspeed_smc_matches);
-
-/*
- * Each chip has a mapping window defined by a segment address
- * register defining a start and an end address on the AHB bus. These
- * addresses can be configured to fit the chip size and offer a
- * contiguous memory region across chips. For the moment, we only
- * check that each chip segment is valid.
- */
-static void __iomem *aspeed_smc_chip_base(struct aspeed_smc_chip *chip,
-					  struct resource *res)
-{
-	struct aspeed_smc_controller *controller = chip->controller;
-	u32 offset = 0;
-	u32 reg;
-
-	if (controller->info->nce > 1) {
-		reg = readl(SEGMENT_ADDR_REG(controller, chip->cs));
-
-		if (SEGMENT_ADDR_START(reg) >= SEGMENT_ADDR_END(reg))
-			return NULL;
-
-		offset = SEGMENT_ADDR_START(reg) - res->start;
-	}
-
-	return controller->ahb_base + offset;
-}
-
-static u32 aspeed_smc_ahb_base_phy(struct aspeed_smc_controller *controller)
-{
-	u32 seg0_val = readl(SEGMENT_ADDR_REG(controller, 0));
-
-	return SEGMENT_ADDR_START(seg0_val);
-}
-
-static u32 chip_set_segment(struct aspeed_smc_chip *chip, u32 cs, u32 start,
-			    u32 size)
-{
-	struct aspeed_smc_controller *controller = chip->controller;
-	void __iomem *seg_reg;
-	u32 seg_oldval, seg_newval, ahb_base_phy, end;
-
-	ahb_base_phy = aspeed_smc_ahb_base_phy(controller);
-
-	seg_reg = SEGMENT_ADDR_REG(controller, cs);
-	seg_oldval = readl(seg_reg);
-
-	/*
-	 * If the chip size is not specified, use the default segment
-	 * size, but take into account the possible overlap with the
-	 * previous segment
-	 */
-	if (!size)
-		size = SEGMENT_ADDR_END(seg_oldval) - start;
-
-	/*
-	 * The segment cannot exceed the maximum window size of the
-	 * controller.
-	 */
-	if (start + size > ahb_base_phy + controller->ahb_window_size) {
-		size = ahb_base_phy + controller->ahb_window_size - start;
-		dev_warn(chip->nor.dev, "CE%d window resized to %dMB",
-			 cs, size >> 20);
-	}
-
-	end = start + size;
-	seg_newval = SEGMENT_ADDR_VALUE(start, end);
-	writel(seg_newval, seg_reg);
-
-	/*
-	 * Restore default value if something goes wrong. The chip
-	 * might have set some bogus value and we would loose access
-	 * to the chip.
-	 */
-	if (seg_newval != readl(seg_reg)) {
-		dev_err(chip->nor.dev, "CE%d window invalid", cs);
-		writel(seg_oldval, seg_reg);
-		start = SEGMENT_ADDR_START(seg_oldval);
-		end = SEGMENT_ADDR_END(seg_oldval);
-		size = end - start;
-	}
-
-	dev_info(chip->nor.dev, "CE%d window [ 0x%.8x - 0x%.8x ] %dMB",
-		 cs, start, end, size >> 20);
-
-	return size;
-}
-
-/*
- * The segment register defines the mapping window on the AHB bus and
- * it needs to be configured depending on the chip size. The segment
- * register of the following CE also needs to be tuned in order to
- * provide a contiguous window across multiple chips.
- *
- * This is expected to be called in increasing CE order
- */
-static u32 aspeed_smc_chip_set_segment(struct aspeed_smc_chip *chip)
-{
-	struct aspeed_smc_controller *controller = chip->controller;
-	u32 ahb_base_phy, start;
-	u32 size = chip->nor.mtd.size;
-
-	/*
-	 * Each controller has a chip size limit for direct memory
-	 * access
-	 */
-	if (size > controller->info->maxsize)
-		size = controller->info->maxsize;
-
-	/*
-	 * The AST2400 SPI controller only handles one chip and does
-	 * not have segment registers. Let's use the chip size for the
-	 * AHB window.
-	 */
-	if (controller->info == &spi_2400_info)
-		goto out;
-
-	/*
-	 * The AST2500 SPI controller has a HW bug when the CE0 chip
-	 * size reaches 128MB. Enforce a size limit of 120MB to
-	 * prevent the controller from using bogus settings in the
-	 * segment register.
-	 */
-	if (chip->cs == 0 && controller->info == &spi_2500_info &&
-	    size == SZ_128M) {
-		size = 120 << 20;
-		dev_info(chip->nor.dev,
-			 "CE%d window resized to %dMB (AST2500 HW quirk)",
-			 chip->cs, size >> 20);
-	}
-
-	ahb_base_phy = aspeed_smc_ahb_base_phy(controller);
-
-	/*
-	 * As a start address for the current segment, use the default
-	 * start address if we are handling CE0 or use the previous
-	 * segment ending address
-	 */
-	if (chip->cs) {
-		u32 prev = readl(SEGMENT_ADDR_REG(controller, chip->cs - 1));
-
-		start = SEGMENT_ADDR_END(prev);
-	} else {
-		start = ahb_base_phy;
-	}
-
-	size = chip_set_segment(chip, chip->cs, start, size);
-
-	/* Update chip base address on the AHB bus */
-	chip->ahb_base = controller->ahb_base + (start - ahb_base_phy);
-
-	/*
-	 * Now, make sure the next segment does not overlap with the
-	 * current one we just configured, even if there is no
-	 * available chip. That could break access in Command Mode.
-	 */
-	if (chip->cs < controller->info->nce - 1)
-		chip_set_segment(chip, chip->cs + 1, start + size, 0);
-
-out:
-	if (size < chip->nor.mtd.size)
-		dev_warn(chip->nor.dev,
-			 "CE%d window too small for chip %dMB",
-			 chip->cs, (u32)chip->nor.mtd.size >> 20);
-
-	return size;
-}
-
-static void aspeed_smc_chip_enable_write(struct aspeed_smc_chip *chip)
-{
-	struct aspeed_smc_controller *controller = chip->controller;
-	u32 reg;
-
-	reg = readl(controller->regs + CONFIG_REG);
-
-	reg |= aspeed_smc_chip_write_bit(chip);
-	writel(reg, controller->regs + CONFIG_REG);
-}
-
-static void aspeed_smc_chip_set_type(struct aspeed_smc_chip *chip, int type)
-{
-	struct aspeed_smc_controller *controller = chip->controller;
-	u32 reg;
-
-	chip->type = type;
-
-	reg = readl(controller->regs + CONFIG_REG);
-	reg &= ~(3 << (chip->cs * 2));
-	reg |= chip->type << (chip->cs * 2);
-	writel(reg, controller->regs + CONFIG_REG);
-}
-
-/*
- * The first chip of the AST2500 FMC flash controller is strapped by
- * hardware, or autodetected, but other chips need to be set. Enforce
- * the 4B setting for all chips.
- */
-static void aspeed_smc_chip_set_4b(struct aspeed_smc_chip *chip)
-{
-	struct aspeed_smc_controller *controller = chip->controller;
-	u32 reg;
-
-	reg = readl(controller->regs + CE_CONTROL_REG);
-	reg |= 1 << chip->cs;
-	writel(reg, controller->regs + CE_CONTROL_REG);
-}
-
-/*
- * The AST2400 SPI flash controller does not have a CE Control
- * register. It uses the CE0 control register to set 4Byte mode at the
- * controller level.
- */
-static void aspeed_smc_chip_set_4b_spi_2400(struct aspeed_smc_chip *chip)
-{
-	chip->ctl_val[smc_base] |= CONTROL_IO_ADDRESS_4B;
-	chip->ctl_val[smc_read] |= CONTROL_IO_ADDRESS_4B;
-}
-
-static int aspeed_smc_chip_setup_init(struct aspeed_smc_chip *chip,
-				      struct resource *res)
-{
-	struct aspeed_smc_controller *controller = chip->controller;
-	const struct aspeed_smc_info *info = controller->info;
-	u32 reg, base_reg;
-
-	/*
-	 * Always turn on the write enable bit to allow opcodes to be
-	 * sent in user mode.
-	 */
-	aspeed_smc_chip_enable_write(chip);
-
-	/* The driver only supports SPI type flash */
-	if (info->hastype)
-		aspeed_smc_chip_set_type(chip, smc_type_spi);
-
-	/*
-	 * Configure chip base address in memory
-	 */
-	chip->ahb_base = aspeed_smc_chip_base(chip, res);
-	if (!chip->ahb_base) {
-		dev_warn(chip->nor.dev, "CE%d window closed", chip->cs);
-		return -EINVAL;
-	}
-
-	/*
-	 * Get value of the inherited control register. U-Boot usually
-	 * does some timing calibration on the FMC chip, so it's good
-	 * to keep them. In the future, we should handle calibration
-	 * from Linux.
-	 */
-	reg = readl(chip->ctl);
-	dev_dbg(controller->dev, "control register: %08x\n", reg);
-
-	base_reg = reg & CONTROL_KEEP_MASK;
-	if (base_reg != reg) {
-		dev_dbg(controller->dev,
-			"control register changed to: %08x\n",
-			base_reg);
-	}
-	chip->ctl_val[smc_base] = base_reg;
-
-	/*
-	 * Retain the prior value of the control register as the
-	 * default if it was normal access mode. Otherwise start with
-	 * the sanitized base value set to read mode.
-	 */
-	if ((reg & CONTROL_COMMAND_MODE_MASK) ==
-	    CONTROL_COMMAND_MODE_NORMAL)
-		chip->ctl_val[smc_read] = reg;
-	else
-		chip->ctl_val[smc_read] = chip->ctl_val[smc_base] |
-			CONTROL_COMMAND_MODE_NORMAL;
-
-	dev_dbg(controller->dev, "default control register: %08x\n",
-		chip->ctl_val[smc_read]);
-	return 0;
-}
-
-static int aspeed_smc_chip_setup_finish(struct aspeed_smc_chip *chip)
-{
-	struct aspeed_smc_controller *controller = chip->controller;
-	const struct aspeed_smc_info *info = controller->info;
-	u32 cmd;
-
-	if (chip->nor.addr_width == 4 && info->set_4b)
-		info->set_4b(chip);
-
-	/* This is for direct AHB access when using Command Mode. */
-	chip->ahb_window_size = aspeed_smc_chip_set_segment(chip);
-
-	/*
-	 * base mode has not been optimized yet. use it for writes.
-	 */
-	chip->ctl_val[smc_write] = chip->ctl_val[smc_base] |
-		chip->nor.program_opcode << CONTROL_COMMAND_SHIFT |
-		CONTROL_COMMAND_MODE_WRITE;
-
-	dev_dbg(controller->dev, "write control register: %08x\n",
-		chip->ctl_val[smc_write]);
-
-	/*
-	 * TODO: Adjust clocks if fast read is supported and interpret
-	 * SPI-NOR flags to adjust controller settings.
-	 */
-	if (chip->nor.read_proto == SNOR_PROTO_1_1_1) {
-		if (chip->nor.read_dummy == 0)
-			cmd = CONTROL_COMMAND_MODE_NORMAL;
-		else
-			cmd = CONTROL_COMMAND_MODE_FREAD;
-	} else {
-		dev_err(chip->nor.dev, "unsupported SPI read mode\n");
-		return -EINVAL;
-	}
-
-	chip->ctl_val[smc_read] |= cmd |
-		CONTROL_IO_DUMMY_SET(chip->nor.read_dummy / 8);
-
-	dev_dbg(controller->dev, "base control register: %08x\n",
-		chip->ctl_val[smc_read]);
-	return 0;
-}
-
-static const struct spi_nor_controller_ops aspeed_smc_controller_ops = {
-	.prepare = aspeed_smc_prep,
-	.unprepare = aspeed_smc_unprep,
-	.read_reg = aspeed_smc_read_reg,
-	.write_reg = aspeed_smc_write_reg,
-	.read = aspeed_smc_read_user,
-	.write = aspeed_smc_write_user,
-};
-
-static int aspeed_smc_setup_flash(struct aspeed_smc_controller *controller,
-				  struct device_node *np, struct resource *r)
-{
-	const struct spi_nor_hwcaps hwcaps = {
-		.mask = SNOR_HWCAPS_READ |
-			SNOR_HWCAPS_READ_FAST |
-			SNOR_HWCAPS_PP,
-	};
-	const struct aspeed_smc_info *info = controller->info;
-	struct device *dev = controller->dev;
-	struct device_node *child;
-	unsigned int cs;
-	int ret = -ENODEV;
-
-	for_each_available_child_of_node(np, child) {
-		struct aspeed_smc_chip *chip;
-		struct spi_nor *nor;
-		struct mtd_info *mtd;
-
-		/* This driver does not support NAND or NOR flash devices. */
-		if (!of_device_is_compatible(child, "jedec,spi-nor"))
-			continue;
-
-		ret = of_property_read_u32(child, "reg", &cs);
-		if (ret) {
-			dev_err(dev, "Couldn't not read chip select.\n");
-			break;
-		}
-
-		if (cs >= info->nce) {
-			dev_err(dev, "Chip select %d out of range.\n",
-				cs);
-			ret = -ERANGE;
-			break;
-		}
-
-		if (controller->chips[cs]) {
-			dev_err(dev, "Chip select %d already in use by %s\n",
-				cs, dev_name(controller->chips[cs]->nor.dev));
-			ret = -EBUSY;
-			break;
-		}
-
-		chip = devm_kzalloc(controller->dev, sizeof(*chip), GFP_KERNEL);
-		if (!chip) {
-			ret = -ENOMEM;
-			break;
-		}
-
-		chip->controller = controller;
-		chip->ctl = controller->regs + info->ctl0 + cs * 4;
-		chip->cs = cs;
-
-		nor = &chip->nor;
-		mtd = &nor->mtd;
-
-		nor->dev = dev;
-		nor->priv = chip;
-		spi_nor_set_flash_node(nor, child);
-		nor->controller_ops = &aspeed_smc_controller_ops;
-
-		ret = aspeed_smc_chip_setup_init(chip, r);
-		if (ret)
-			break;
-
-		/*
-		 * TODO: Add support for Dual and Quad SPI protocols
-		 * attach when board support is present as determined
-		 * by of property.
-		 */
-		ret = spi_nor_scan(nor, NULL, &hwcaps);
-		if (ret)
-			break;
-
-		ret = aspeed_smc_chip_setup_finish(chip);
-		if (ret)
-			break;
-
-		ret = mtd_device_register(mtd, NULL, 0);
-		if (ret)
-			break;
-
-		controller->chips[cs] = chip;
-	}
-
-	if (ret) {
-		of_node_put(child);
-		aspeed_smc_unregister(controller);
-	}
-
-	return ret;
-}
-
-static int aspeed_smc_probe(struct platform_device *pdev)
-{
-	struct device_node *np = pdev->dev.of_node;
-	struct device *dev = &pdev->dev;
-	struct aspeed_smc_controller *controller;
-	const struct of_device_id *match;
-	const struct aspeed_smc_info *info;
-	struct resource *res;
-	int ret;
-
-	match = of_match_device(aspeed_smc_matches, &pdev->dev);
-	if (!match || !match->data)
-		return -ENODEV;
-	info = match->data;
-
-	controller = devm_kzalloc(&pdev->dev,
-				  struct_size(controller, chips, info->nce),
-				  GFP_KERNEL);
-	if (!controller)
-		return -ENOMEM;
-	controller->info = info;
-	controller->dev = dev;
-
-	mutex_init(&controller->mutex);
-	platform_set_drvdata(pdev, controller);
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	controller->regs = devm_ioremap_resource(dev, res);
-	if (IS_ERR(controller->regs))
-		return PTR_ERR(controller->regs);
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	controller->ahb_base = devm_ioremap_resource(dev, res);
-	if (IS_ERR(controller->ahb_base))
-		return PTR_ERR(controller->ahb_base);
-
-	controller->ahb_window_size = resource_size(res);
-
-	ret = aspeed_smc_setup_flash(controller, np, res);
-	if (ret)
-		dev_err(dev, "Aspeed SMC probe failed %d\n", ret);
-
-	return ret;
-}
-
-static struct platform_driver aspeed_smc_driver = {
-	.probe = aspeed_smc_probe,
-	.remove = aspeed_smc_remove,
-	.driver = {
-		.name = DEVICE_NAME,
-		.of_match_table = aspeed_smc_matches,
-	}
-};
-
-module_platform_driver(aspeed_smc_driver);
-
-MODULE_DESCRIPTION("ASPEED Static Memory Controller Driver");
-MODULE_AUTHOR("Cedric Le Goater <clg@kaod.org>");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/mtd/spi-nor/atmel.c b/drivers/mtd/spi-nor/atmel.c
new file mode 100644
index 0000000..3f5f21a
--- /dev/null
+++ b/drivers/mtd/spi-nor/atmel.c
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static const struct flash_info atmel_parts[] = {
+	/* Atmel -- some are (confusingly) marketed as "DataFlash" */
+	{ "at25fs010",  INFO(0x1f6601, 0, 32 * 1024,   4, SECT_4K) },
+	{ "at25fs040",  INFO(0x1f6604, 0, 64 * 1024,   8, SECT_4K) },
+
+	{ "at25df041a", INFO(0x1f4401, 0, 64 * 1024,   8, SECT_4K) },
+	{ "at25df321",  INFO(0x1f4700, 0, 64 * 1024,  64, SECT_4K) },
+	{ "at25df321a", INFO(0x1f4701, 0, 64 * 1024,  64, SECT_4K) },
+	{ "at25df641",  INFO(0x1f4800, 0, 64 * 1024, 128, SECT_4K) },
+
+	{ "at25sl321",	INFO(0x1f4216, 0, 64 * 1024, 64,
+			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+
+	{ "at26f004",   INFO(0x1f0400, 0, 64 * 1024,  8, SECT_4K) },
+	{ "at26df081a", INFO(0x1f4501, 0, 64 * 1024, 16, SECT_4K) },
+	{ "at26df161a", INFO(0x1f4601, 0, 64 * 1024, 32, SECT_4K) },
+	{ "at26df321",  INFO(0x1f4700, 0, 64 * 1024, 64, SECT_4K) },
+
+	{ "at45db081d", INFO(0x1f2500, 0, 64 * 1024, 16, SECT_4K) },
+};
+
+static void atmel_default_init(struct spi_nor *nor)
+{
+	nor->flags |= SNOR_F_HAS_LOCK;
+}
+
+static const struct spi_nor_fixups atmel_fixups = {
+	.default_init = atmel_default_init,
+};
+
+const struct spi_nor_manufacturer spi_nor_atmel = {
+	.name = "atmel",
+	.parts = atmel_parts,
+	.nparts = ARRAY_SIZE(atmel_parts),
+	.fixups = &atmel_fixups,
+};
diff --git a/drivers/mtd/spi-nor/catalyst.c b/drivers/mtd/spi-nor/catalyst.c
new file mode 100644
index 0000000..011b83e
--- /dev/null
+++ b/drivers/mtd/spi-nor/catalyst.c
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static const struct flash_info catalyst_parts[] = {
+	/* Catalyst / On Semiconductor -- non-JEDEC */
+	{ "cat25c11", CAT25_INFO(16, 8, 16, 1,
+				 SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
+	{ "cat25c03", CAT25_INFO(32, 8, 16, 2,
+				 SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
+	{ "cat25c09", CAT25_INFO(128, 8, 32, 2,
+				 SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
+	{ "cat25c17", CAT25_INFO(256, 8, 32, 2,
+				 SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
+	{ "cat25128", CAT25_INFO(2048, 8, 64, 2,
+				 SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
+};
+
+const struct spi_nor_manufacturer spi_nor_catalyst = {
+	.name = "catalyst",
+	.parts = catalyst_parts,
+	.nparts = ARRAY_SIZE(catalyst_parts),
+};
diff --git a/drivers/mtd/spi-nor/controllers/Kconfig b/drivers/mtd/spi-nor/controllers/Kconfig
new file mode 100644
index 0000000..10b8666
--- /dev/null
+++ b/drivers/mtd/spi-nor/controllers/Kconfig
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config SPI_ASPEED_SMC
+	tristate "Aspeed flash controllers in SPI mode"
+	depends on ARCH_ASPEED || COMPILE_TEST
+	depends on HAS_IOMEM && OF
+	help
+	  This enables support for the Firmware Memory controller (FMC)
+	  in the Aspeed AST2500/AST2400 SoCs when attached to SPI NOR chips,
+	  and support for the SPI flash memory controller (SPI) for
+	  the host firmware. The implementation only supports SPI NOR.
+
+config SPI_CADENCE_QUADSPI
+	tristate "Cadence Quad SPI controller"
+	depends on OF && (ARM || ARM64 || COMPILE_TEST)
+	help
+	  Enable support for the Cadence Quad SPI Flash controller.
+
+	  Cadence QSPI is a specialized controller for connecting an SPI
+	  Flash over 1/2/4-bit wide bus. Enable this option if you have a
+	  device with a Cadence QSPI controller and want to access the
+	  Flash as an MTD device.
+
+config SPI_HISI_SFC
+	tristate "Hisilicon FMC SPI-NOR Flash Controller(SFC)"
+	depends on ARCH_HISI || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  This enables support for HiSilicon FMC SPI-NOR flash controller.
+
+config SPI_NXP_SPIFI
+	tristate "NXP SPI Flash Interface (SPIFI)"
+	depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
+	depends on HAS_IOMEM
+	help
+	  Enable support for the NXP LPC SPI Flash Interface controller.
+
+	  SPIFI is a specialized controller for connecting serial SPI
+	  Flash. Enable this option if you have a device with a SPIFI
+	  controller and want to access the Flash as a mtd device.
+
+config SPI_INTEL_SPI
+	tristate
+
+config SPI_INTEL_SPI_PCI
+	tristate "Intel PCH/PCU SPI flash PCI driver (DANGEROUS)"
+	depends on X86 && PCI
+	select SPI_INTEL_SPI
+	help
+	  This enables PCI support for the Intel PCH/PCU SPI controller in
+	  master mode. This controller is present in modern Intel hardware
+	  and is used to hold BIOS and other persistent settings. Using
+	  this driver it is possible to upgrade BIOS directly from Linux.
+
+	  Say N here unless you know what you are doing. Overwriting the
+	  SPI flash may render the system unbootable.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called intel-spi-pci.
+
+config SPI_INTEL_SPI_PLATFORM
+	tristate "Intel PCH/PCU SPI flash platform driver (DANGEROUS)"
+	depends on X86
+	select SPI_INTEL_SPI
+	help
+	  This enables platform support for the Intel PCH/PCU SPI
+	  controller in master mode. This controller is present in modern
+	  Intel hardware and is used to hold BIOS and other persistent
+	  settings. Using this driver it is possible to upgrade BIOS
+	  directly from Linux.
+
+	  Say N here unless you know what you are doing. Overwriting the
+	  SPI flash may render the system unbootable.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called intel-spi-platform.
diff --git a/drivers/mtd/spi-nor/controllers/Makefile b/drivers/mtd/spi-nor/controllers/Makefile
new file mode 100644
index 0000000..46e6fbe
--- /dev/null
+++ b/drivers/mtd/spi-nor/controllers/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_SPI_ASPEED_SMC)	+= aspeed-smc.o
+obj-$(CONFIG_SPI_CADENCE_QUADSPI)	+= cadence-quadspi.o
+obj-$(CONFIG_SPI_HISI_SFC)	+= hisi-sfc.o
+obj-$(CONFIG_SPI_NXP_SPIFI)	+= nxp-spifi.o
+obj-$(CONFIG_SPI_INTEL_SPI)	+= intel-spi.o
+obj-$(CONFIG_SPI_INTEL_SPI_PCI)	+= intel-spi-pci.o
+obj-$(CONFIG_SPI_INTEL_SPI_PLATFORM)	+= intel-spi-platform.o
diff --git a/drivers/mtd/spi-nor/controllers/aspeed-smc.c b/drivers/mtd/spi-nor/controllers/aspeed-smc.c
new file mode 100644
index 0000000..ae85e4c
--- /dev/null
+++ b/drivers/mtd/spi-nor/controllers/aspeed-smc.c
@@ -0,0 +1,910 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ASPEED Static Memory Controller driver
+ *
+ * Copyright (c) 2015-2016, IBM Corporation.
+ */
+
+#include <linux/bug.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/spi-nor.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/sizes.h>
+#include <linux/sysfs.h>
+
+#define DEVICE_NAME	"aspeed-smc"
+
+/*
+ * The driver only support SPI flash
+ */
+enum aspeed_smc_flash_type {
+	smc_type_nor  = 0,
+	smc_type_nand = 1,
+	smc_type_spi  = 2,
+};
+
+struct aspeed_smc_chip;
+
+struct aspeed_smc_info {
+	u32 maxsize;		/* maximum size of chip window */
+	u8 nce;			/* number of chip enables */
+	bool hastype;		/* flash type field exists in config reg */
+	u8 we0;			/* shift for write enable bit for CE0 */
+	u8 ctl0;		/* offset in regs of ctl for CE0 */
+
+	void (*set_4b)(struct aspeed_smc_chip *chip);
+};
+
+static void aspeed_smc_chip_set_4b_spi_2400(struct aspeed_smc_chip *chip);
+static void aspeed_smc_chip_set_4b(struct aspeed_smc_chip *chip);
+
+static const struct aspeed_smc_info fmc_2400_info = {
+	.maxsize = 64 * 1024 * 1024,
+	.nce = 5,
+	.hastype = true,
+	.we0 = 16,
+	.ctl0 = 0x10,
+	.set_4b = aspeed_smc_chip_set_4b,
+};
+
+static const struct aspeed_smc_info spi_2400_info = {
+	.maxsize = 64 * 1024 * 1024,
+	.nce = 1,
+	.hastype = false,
+	.we0 = 0,
+	.ctl0 = 0x04,
+	.set_4b = aspeed_smc_chip_set_4b_spi_2400,
+};
+
+static const struct aspeed_smc_info fmc_2500_info = {
+	.maxsize = 256 * 1024 * 1024,
+	.nce = 3,
+	.hastype = true,
+	.we0 = 16,
+	.ctl0 = 0x10,
+	.set_4b = aspeed_smc_chip_set_4b,
+};
+
+static const struct aspeed_smc_info spi_2500_info = {
+	.maxsize = 128 * 1024 * 1024,
+	.nce = 2,
+	.hastype = false,
+	.we0 = 16,
+	.ctl0 = 0x10,
+	.set_4b = aspeed_smc_chip_set_4b,
+};
+
+enum aspeed_smc_ctl_reg_value {
+	smc_base,		/* base value without mode for other commands */
+	smc_read,		/* command reg for (maybe fast) reads */
+	smc_write,		/* command reg for writes */
+	smc_max,
+};
+
+struct aspeed_smc_controller;
+
+struct aspeed_smc_chip {
+	int cs;
+	struct aspeed_smc_controller *controller;
+	void __iomem *ctl;			/* control register */
+	void __iomem *ahb_base;			/* base of chip window */
+	u32 ahb_window_size;			/* chip mapping window size */
+	u32 ctl_val[smc_max];			/* control settings */
+	enum aspeed_smc_flash_type type;	/* what type of flash */
+	struct spi_nor nor;
+};
+
+struct aspeed_smc_controller {
+	struct device *dev;
+
+	struct mutex mutex;			/* controller access mutex */
+	const struct aspeed_smc_info *info;	/* type info of controller */
+	void __iomem *regs;			/* controller registers */
+	void __iomem *ahb_base;			/* per-chip windows resource */
+	u32 ahb_window_size;			/* full mapping window size */
+
+	struct aspeed_smc_chip *chips[];	/* pointers to attached chips */
+};
+
+/*
+ * SPI Flash Configuration Register (AST2500 SPI)
+ *     or
+ * Type setting Register (AST2500 FMC).
+ * CE0 and CE1 can only be of type SPI. CE2 can be of type NOR but the
+ * driver does not support it.
+ */
+#define CONFIG_REG			0x0
+#define CONFIG_DISABLE_LEGACY		BIT(31) /* 1 */
+
+#define CONFIG_CE2_WRITE		BIT(18)
+#define CONFIG_CE1_WRITE		BIT(17)
+#define CONFIG_CE0_WRITE		BIT(16)
+
+#define CONFIG_CE2_TYPE			BIT(4) /* AST2500 FMC only */
+#define CONFIG_CE1_TYPE			BIT(2) /* AST2500 FMC only */
+#define CONFIG_CE0_TYPE			BIT(0) /* AST2500 FMC only */
+
+/*
+ * CE Control Register
+ */
+#define CE_CONTROL_REG			0x4
+
+/*
+ * CEx Control Register
+ */
+#define CONTROL_AAF_MODE		BIT(31)
+#define CONTROL_IO_MODE_MASK		GENMASK(30, 28)
+#define CONTROL_IO_DUAL_DATA		BIT(29)
+#define CONTROL_IO_DUAL_ADDR_DATA	(BIT(29) | BIT(28))
+#define CONTROL_IO_QUAD_DATA		BIT(30)
+#define CONTROL_IO_QUAD_ADDR_DATA	(BIT(30) | BIT(28))
+#define CONTROL_CE_INACTIVE_SHIFT	24
+#define CONTROL_CE_INACTIVE_MASK	GENMASK(27, \
+					CONTROL_CE_INACTIVE_SHIFT)
+/* 0 = 16T ... 15 = 1T   T=HCLK */
+#define CONTROL_COMMAND_SHIFT		16
+#define CONTROL_DUMMY_COMMAND_OUT	BIT(15)
+#define CONTROL_IO_DUMMY_HI		BIT(14)
+#define CONTROL_IO_DUMMY_HI_SHIFT	14
+#define CONTROL_CLK_DIV4		BIT(13) /* others */
+#define CONTROL_IO_ADDRESS_4B		BIT(13) /* AST2400 SPI */
+#define CONTROL_RW_MERGE		BIT(12)
+#define CONTROL_IO_DUMMY_LO_SHIFT	6
+#define CONTROL_IO_DUMMY_LO		GENMASK(7, \
+						CONTROL_IO_DUMMY_LO_SHIFT)
+#define CONTROL_IO_DUMMY_MASK		(CONTROL_IO_DUMMY_HI | \
+					 CONTROL_IO_DUMMY_LO)
+#define CONTROL_IO_DUMMY_SET(dummy)				 \
+	(((((dummy) >> 2) & 0x1) << CONTROL_IO_DUMMY_HI_SHIFT) | \
+	 (((dummy) & 0x3) << CONTROL_IO_DUMMY_LO_SHIFT))
+
+#define CONTROL_CLOCK_FREQ_SEL_SHIFT	8
+#define CONTROL_CLOCK_FREQ_SEL_MASK	GENMASK(11, \
+						CONTROL_CLOCK_FREQ_SEL_SHIFT)
+#define CONTROL_LSB_FIRST		BIT(5)
+#define CONTROL_CLOCK_MODE_3		BIT(4)
+#define CONTROL_IN_DUAL_DATA		BIT(3)
+#define CONTROL_CE_STOP_ACTIVE_CONTROL	BIT(2)
+#define CONTROL_COMMAND_MODE_MASK	GENMASK(1, 0)
+#define CONTROL_COMMAND_MODE_NORMAL	0
+#define CONTROL_COMMAND_MODE_FREAD	1
+#define CONTROL_COMMAND_MODE_WRITE	2
+#define CONTROL_COMMAND_MODE_USER	3
+
+#define CONTROL_KEEP_MASK						\
+	(CONTROL_AAF_MODE | CONTROL_CE_INACTIVE_MASK | CONTROL_CLK_DIV4 | \
+	 CONTROL_CLOCK_FREQ_SEL_MASK | CONTROL_LSB_FIRST | CONTROL_CLOCK_MODE_3)
+
+/*
+ * The Segment Register uses a 8MB unit to encode the start address
+ * and the end address of the mapping window of a flash SPI slave :
+ *
+ *        | byte 1 | byte 2 | byte 3 | byte 4 |
+ *        +--------+--------+--------+--------+
+ *        |  end   |  start |   0    |   0    |
+ */
+#define SEGMENT_ADDR_REG0		0x30
+#define SEGMENT_ADDR_START(_r)		((((_r) >> 16) & 0xFF) << 23)
+#define SEGMENT_ADDR_END(_r)		((((_r) >> 24) & 0xFF) << 23)
+#define SEGMENT_ADDR_VALUE(start, end)					\
+	(((((start) >> 23) & 0xFF) << 16) | ((((end) >> 23) & 0xFF) << 24))
+#define SEGMENT_ADDR_REG(controller, cs)	\
+	((controller)->regs + SEGMENT_ADDR_REG0 + (cs) * 4)
+
+/*
+ * In user mode all data bytes read or written to the chip decode address
+ * range are transferred to or from the SPI bus. The range is treated as a
+ * fifo of arbitratry 1, 2, or 4 byte width but each write has to be aligned
+ * to its size. The address within the multiple 8kB range is ignored when
+ * sending bytes to the SPI bus.
+ *
+ * On the arm architecture, as of Linux version 4.3, memcpy_fromio and
+ * memcpy_toio on little endian targets use the optimized memcpy routines
+ * that were designed for well behavied memory storage. These routines
+ * have a stutter if the source and destination are not both word aligned,
+ * once with a duplicate access to the source after aligning to the
+ * destination to a word boundary, and again with a duplicate access to
+ * the source when the final byte count is not word aligned.
+ *
+ * When writing or reading the fifo this stutter discards data or sends
+ * too much data to the fifo and can not be used by this driver.
+ *
+ * While the low level io string routines that implement the insl family do
+ * the desired accesses and memory increments, the cross architecture io
+ * macros make them essentially impossible to use on a memory mapped address
+ * instead of a a token from the call to iomap of an io port.
+ *
+ * These fifo routines use readl and friends to a constant io port and update
+ * the memory buffer pointer and count via explicit code. The final updates
+ * to len are optimistically suppressed.
+ */
+static int aspeed_smc_read_from_ahb(void *buf, void __iomem *src, size_t len)
+{
+	size_t offset = 0;
+
+	if (IS_ALIGNED((uintptr_t)src, sizeof(uintptr_t)) &&
+	    IS_ALIGNED((uintptr_t)buf, sizeof(uintptr_t))) {
+		ioread32_rep(src, buf, len >> 2);
+		offset = len & ~0x3;
+		len -= offset;
+	}
+	ioread8_rep(src, (u8 *)buf + offset, len);
+	return 0;
+}
+
+static int aspeed_smc_write_to_ahb(void __iomem *dst, const void *buf,
+				   size_t len)
+{
+	size_t offset = 0;
+
+	if (IS_ALIGNED((uintptr_t)dst, sizeof(uintptr_t)) &&
+	    IS_ALIGNED((uintptr_t)buf, sizeof(uintptr_t))) {
+		iowrite32_rep(dst, buf, len >> 2);
+		offset = len & ~0x3;
+		len -= offset;
+	}
+	iowrite8_rep(dst, (const u8 *)buf + offset, len);
+	return 0;
+}
+
+static inline u32 aspeed_smc_chip_write_bit(struct aspeed_smc_chip *chip)
+{
+	return BIT(chip->controller->info->we0 + chip->cs);
+}
+
+static void aspeed_smc_chip_check_config(struct aspeed_smc_chip *chip)
+{
+	struct aspeed_smc_controller *controller = chip->controller;
+	u32 reg;
+
+	reg = readl(controller->regs + CONFIG_REG);
+
+	if (reg & aspeed_smc_chip_write_bit(chip))
+		return;
+
+	dev_dbg(controller->dev, "config write is not set ! @%p: 0x%08x\n",
+		controller->regs + CONFIG_REG, reg);
+	reg |= aspeed_smc_chip_write_bit(chip);
+	writel(reg, controller->regs + CONFIG_REG);
+}
+
+static void aspeed_smc_start_user(struct spi_nor *nor)
+{
+	struct aspeed_smc_chip *chip = nor->priv;
+	u32 ctl = chip->ctl_val[smc_base];
+
+	/*
+	 * When the chip is controlled in user mode, we need write
+	 * access to send the opcodes to it. So check the config.
+	 */
+	aspeed_smc_chip_check_config(chip);
+
+	ctl |= CONTROL_COMMAND_MODE_USER |
+		CONTROL_CE_STOP_ACTIVE_CONTROL;
+	writel(ctl, chip->ctl);
+
+	ctl &= ~CONTROL_CE_STOP_ACTIVE_CONTROL;
+	writel(ctl, chip->ctl);
+}
+
+static void aspeed_smc_stop_user(struct spi_nor *nor)
+{
+	struct aspeed_smc_chip *chip = nor->priv;
+
+	u32 ctl = chip->ctl_val[smc_read];
+	u32 ctl2 = ctl | CONTROL_COMMAND_MODE_USER |
+		CONTROL_CE_STOP_ACTIVE_CONTROL;
+
+	writel(ctl2, chip->ctl);	/* stop user CE control */
+	writel(ctl, chip->ctl);		/* default to fread or read mode */
+}
+
+static int aspeed_smc_prep(struct spi_nor *nor)
+{
+	struct aspeed_smc_chip *chip = nor->priv;
+
+	mutex_lock(&chip->controller->mutex);
+	return 0;
+}
+
+static void aspeed_smc_unprep(struct spi_nor *nor)
+{
+	struct aspeed_smc_chip *chip = nor->priv;
+
+	mutex_unlock(&chip->controller->mutex);
+}
+
+static int aspeed_smc_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf,
+			       size_t len)
+{
+	struct aspeed_smc_chip *chip = nor->priv;
+
+	aspeed_smc_start_user(nor);
+	aspeed_smc_write_to_ahb(chip->ahb_base, &opcode, 1);
+	aspeed_smc_read_from_ahb(buf, chip->ahb_base, len);
+	aspeed_smc_stop_user(nor);
+	return 0;
+}
+
+static int aspeed_smc_write_reg(struct spi_nor *nor, u8 opcode, const u8 *buf,
+				size_t len)
+{
+	struct aspeed_smc_chip *chip = nor->priv;
+
+	aspeed_smc_start_user(nor);
+	aspeed_smc_write_to_ahb(chip->ahb_base, &opcode, 1);
+	aspeed_smc_write_to_ahb(chip->ahb_base, buf, len);
+	aspeed_smc_stop_user(nor);
+	return 0;
+}
+
+static void aspeed_smc_send_cmd_addr(struct spi_nor *nor, u8 cmd, u32 addr)
+{
+	struct aspeed_smc_chip *chip = nor->priv;
+	__be32 temp;
+	u32 cmdaddr;
+
+	switch (nor->addr_width) {
+	default:
+		WARN_ONCE(1, "Unexpected address width %u, defaulting to 3\n",
+			  nor->addr_width);
+		fallthrough;
+	case 3:
+		cmdaddr = addr & 0xFFFFFF;
+		cmdaddr |= cmd << 24;
+
+		temp = cpu_to_be32(cmdaddr);
+		aspeed_smc_write_to_ahb(chip->ahb_base, &temp, 4);
+		break;
+	case 4:
+		temp = cpu_to_be32(addr);
+		aspeed_smc_write_to_ahb(chip->ahb_base, &cmd, 1);
+		aspeed_smc_write_to_ahb(chip->ahb_base, &temp, 4);
+		break;
+	}
+}
+
+static ssize_t aspeed_smc_read_user(struct spi_nor *nor, loff_t from,
+				    size_t len, u_char *read_buf)
+{
+	struct aspeed_smc_chip *chip = nor->priv;
+	int i;
+	u8 dummy = 0xFF;
+
+	aspeed_smc_start_user(nor);
+	aspeed_smc_send_cmd_addr(nor, nor->read_opcode, from);
+	for (i = 0; i < chip->nor.read_dummy / 8; i++)
+		aspeed_smc_write_to_ahb(chip->ahb_base, &dummy, sizeof(dummy));
+
+	aspeed_smc_read_from_ahb(read_buf, chip->ahb_base, len);
+	aspeed_smc_stop_user(nor);
+	return len;
+}
+
+static ssize_t aspeed_smc_write_user(struct spi_nor *nor, loff_t to,
+				     size_t len, const u_char *write_buf)
+{
+	struct aspeed_smc_chip *chip = nor->priv;
+
+	aspeed_smc_start_user(nor);
+	aspeed_smc_send_cmd_addr(nor, nor->program_opcode, to);
+	aspeed_smc_write_to_ahb(chip->ahb_base, write_buf, len);
+	aspeed_smc_stop_user(nor);
+	return len;
+}
+
+static int aspeed_smc_unregister(struct aspeed_smc_controller *controller)
+{
+	struct aspeed_smc_chip *chip;
+	int n;
+
+	for (n = 0; n < controller->info->nce; n++) {
+		chip = controller->chips[n];
+		if (chip)
+			mtd_device_unregister(&chip->nor.mtd);
+	}
+
+	return 0;
+}
+
+static int aspeed_smc_remove(struct platform_device *dev)
+{
+	return aspeed_smc_unregister(platform_get_drvdata(dev));
+}
+
+static const struct of_device_id aspeed_smc_matches[] = {
+	{ .compatible = "aspeed,ast2400-fmc", .data = &fmc_2400_info },
+	{ .compatible = "aspeed,ast2400-spi", .data = &spi_2400_info },
+	{ .compatible = "aspeed,ast2500-fmc", .data = &fmc_2500_info },
+	{ .compatible = "aspeed,ast2500-spi", .data = &spi_2500_info },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, aspeed_smc_matches);
+
+/*
+ * Each chip has a mapping window defined by a segment address
+ * register defining a start and an end address on the AHB bus. These
+ * addresses can be configured to fit the chip size and offer a
+ * contiguous memory region across chips. For the moment, we only
+ * check that each chip segment is valid.
+ */
+static void __iomem *aspeed_smc_chip_base(struct aspeed_smc_chip *chip,
+					  struct resource *res)
+{
+	struct aspeed_smc_controller *controller = chip->controller;
+	u32 offset = 0;
+	u32 reg;
+
+	if (controller->info->nce > 1) {
+		reg = readl(SEGMENT_ADDR_REG(controller, chip->cs));
+
+		if (SEGMENT_ADDR_START(reg) >= SEGMENT_ADDR_END(reg))
+			return NULL;
+
+		offset = SEGMENT_ADDR_START(reg) - res->start;
+	}
+
+	return controller->ahb_base + offset;
+}
+
+static u32 aspeed_smc_ahb_base_phy(struct aspeed_smc_controller *controller)
+{
+	u32 seg0_val = readl(SEGMENT_ADDR_REG(controller, 0));
+
+	return SEGMENT_ADDR_START(seg0_val);
+}
+
+static u32 chip_set_segment(struct aspeed_smc_chip *chip, u32 cs, u32 start,
+			    u32 size)
+{
+	struct aspeed_smc_controller *controller = chip->controller;
+	void __iomem *seg_reg;
+	u32 seg_oldval, seg_newval, ahb_base_phy, end;
+
+	ahb_base_phy = aspeed_smc_ahb_base_phy(controller);
+
+	seg_reg = SEGMENT_ADDR_REG(controller, cs);
+	seg_oldval = readl(seg_reg);
+
+	/*
+	 * If the chip size is not specified, use the default segment
+	 * size, but take into account the possible overlap with the
+	 * previous segment
+	 */
+	if (!size)
+		size = SEGMENT_ADDR_END(seg_oldval) - start;
+
+	/*
+	 * The segment cannot exceed the maximum window size of the
+	 * controller.
+	 */
+	if (start + size > ahb_base_phy + controller->ahb_window_size) {
+		size = ahb_base_phy + controller->ahb_window_size - start;
+		dev_warn(chip->nor.dev, "CE%d window resized to %dMB",
+			 cs, size >> 20);
+	}
+
+	end = start + size;
+	seg_newval = SEGMENT_ADDR_VALUE(start, end);
+	writel(seg_newval, seg_reg);
+
+	/*
+	 * Restore default value if something goes wrong. The chip
+	 * might have set some bogus value and we would loose access
+	 * to the chip.
+	 */
+	if (seg_newval != readl(seg_reg)) {
+		dev_err(chip->nor.dev, "CE%d window invalid", cs);
+		writel(seg_oldval, seg_reg);
+		start = SEGMENT_ADDR_START(seg_oldval);
+		end = SEGMENT_ADDR_END(seg_oldval);
+		size = end - start;
+	}
+
+	dev_info(chip->nor.dev, "CE%d window [ 0x%.8x - 0x%.8x ] %dMB",
+		 cs, start, end, size >> 20);
+
+	return size;
+}
+
+/*
+ * The segment register defines the mapping window on the AHB bus and
+ * it needs to be configured depending on the chip size. The segment
+ * register of the following CE also needs to be tuned in order to
+ * provide a contiguous window across multiple chips.
+ *
+ * This is expected to be called in increasing CE order
+ */
+static u32 aspeed_smc_chip_set_segment(struct aspeed_smc_chip *chip)
+{
+	struct aspeed_smc_controller *controller = chip->controller;
+	u32 ahb_base_phy, start;
+	u32 size = chip->nor.mtd.size;
+
+	/*
+	 * Each controller has a chip size limit for direct memory
+	 * access
+	 */
+	if (size > controller->info->maxsize)
+		size = controller->info->maxsize;
+
+	/*
+	 * The AST2400 SPI controller only handles one chip and does
+	 * not have segment registers. Let's use the chip size for the
+	 * AHB window.
+	 */
+	if (controller->info == &spi_2400_info)
+		goto out;
+
+	/*
+	 * The AST2500 SPI controller has a HW bug when the CE0 chip
+	 * size reaches 128MB. Enforce a size limit of 120MB to
+	 * prevent the controller from using bogus settings in the
+	 * segment register.
+	 */
+	if (chip->cs == 0 && controller->info == &spi_2500_info &&
+	    size == SZ_128M) {
+		size = 120 << 20;
+		dev_info(chip->nor.dev,
+			 "CE%d window resized to %dMB (AST2500 HW quirk)",
+			 chip->cs, size >> 20);
+	}
+
+	ahb_base_phy = aspeed_smc_ahb_base_phy(controller);
+
+	/*
+	 * As a start address for the current segment, use the default
+	 * start address if we are handling CE0 or use the previous
+	 * segment ending address
+	 */
+	if (chip->cs) {
+		u32 prev = readl(SEGMENT_ADDR_REG(controller, chip->cs - 1));
+
+		start = SEGMENT_ADDR_END(prev);
+	} else {
+		start = ahb_base_phy;
+	}
+
+	size = chip_set_segment(chip, chip->cs, start, size);
+
+	/* Update chip base address on the AHB bus */
+	chip->ahb_base = controller->ahb_base + (start - ahb_base_phy);
+
+	/*
+	 * Now, make sure the next segment does not overlap with the
+	 * current one we just configured, even if there is no
+	 * available chip. That could break access in Command Mode.
+	 */
+	if (chip->cs < controller->info->nce - 1)
+		chip_set_segment(chip, chip->cs + 1, start + size, 0);
+
+out:
+	if (size < chip->nor.mtd.size)
+		dev_warn(chip->nor.dev,
+			 "CE%d window too small for chip %dMB",
+			 chip->cs, (u32)chip->nor.mtd.size >> 20);
+
+	return size;
+}
+
+static void aspeed_smc_chip_enable_write(struct aspeed_smc_chip *chip)
+{
+	struct aspeed_smc_controller *controller = chip->controller;
+	u32 reg;
+
+	reg = readl(controller->regs + CONFIG_REG);
+
+	reg |= aspeed_smc_chip_write_bit(chip);
+	writel(reg, controller->regs + CONFIG_REG);
+}
+
+static void aspeed_smc_chip_set_type(struct aspeed_smc_chip *chip, int type)
+{
+	struct aspeed_smc_controller *controller = chip->controller;
+	u32 reg;
+
+	chip->type = type;
+
+	reg = readl(controller->regs + CONFIG_REG);
+	reg &= ~(3 << (chip->cs * 2));
+	reg |= chip->type << (chip->cs * 2);
+	writel(reg, controller->regs + CONFIG_REG);
+}
+
+/*
+ * The first chip of the AST2500 FMC flash controller is strapped by
+ * hardware, or autodetected, but other chips need to be set. Enforce
+ * the 4B setting for all chips.
+ */
+static void aspeed_smc_chip_set_4b(struct aspeed_smc_chip *chip)
+{
+	struct aspeed_smc_controller *controller = chip->controller;
+	u32 reg;
+
+	reg = readl(controller->regs + CE_CONTROL_REG);
+	reg |= 1 << chip->cs;
+	writel(reg, controller->regs + CE_CONTROL_REG);
+}
+
+/*
+ * The AST2400 SPI flash controller does not have a CE Control
+ * register. It uses the CE0 control register to set 4Byte mode at the
+ * controller level.
+ */
+static void aspeed_smc_chip_set_4b_spi_2400(struct aspeed_smc_chip *chip)
+{
+	chip->ctl_val[smc_base] |= CONTROL_IO_ADDRESS_4B;
+	chip->ctl_val[smc_read] |= CONTROL_IO_ADDRESS_4B;
+}
+
+static int aspeed_smc_chip_setup_init(struct aspeed_smc_chip *chip,
+				      struct resource *res)
+{
+	struct aspeed_smc_controller *controller = chip->controller;
+	const struct aspeed_smc_info *info = controller->info;
+	u32 reg, base_reg;
+
+	/*
+	 * Always turn on the write enable bit to allow opcodes to be
+	 * sent in user mode.
+	 */
+	aspeed_smc_chip_enable_write(chip);
+
+	/* The driver only supports SPI type flash */
+	if (info->hastype)
+		aspeed_smc_chip_set_type(chip, smc_type_spi);
+
+	/*
+	 * Configure chip base address in memory
+	 */
+	chip->ahb_base = aspeed_smc_chip_base(chip, res);
+	if (!chip->ahb_base) {
+		dev_warn(chip->nor.dev, "CE%d window closed", chip->cs);
+		return -EINVAL;
+	}
+
+	/*
+	 * Get value of the inherited control register. U-Boot usually
+	 * does some timing calibration on the FMC chip, so it's good
+	 * to keep them. In the future, we should handle calibration
+	 * from Linux.
+	 */
+	reg = readl(chip->ctl);
+	dev_dbg(controller->dev, "control register: %08x\n", reg);
+
+	base_reg = reg & CONTROL_KEEP_MASK;
+	if (base_reg != reg) {
+		dev_dbg(controller->dev,
+			"control register changed to: %08x\n",
+			base_reg);
+	}
+	chip->ctl_val[smc_base] = base_reg;
+
+	/*
+	 * Retain the prior value of the control register as the
+	 * default if it was normal access mode. Otherwise start with
+	 * the sanitized base value set to read mode.
+	 */
+	if ((reg & CONTROL_COMMAND_MODE_MASK) ==
+	    CONTROL_COMMAND_MODE_NORMAL)
+		chip->ctl_val[smc_read] = reg;
+	else
+		chip->ctl_val[smc_read] = chip->ctl_val[smc_base] |
+			CONTROL_COMMAND_MODE_NORMAL;
+
+	dev_dbg(controller->dev, "default control register: %08x\n",
+		chip->ctl_val[smc_read]);
+	return 0;
+}
+
+static int aspeed_smc_chip_setup_finish(struct aspeed_smc_chip *chip)
+{
+	struct aspeed_smc_controller *controller = chip->controller;
+	const struct aspeed_smc_info *info = controller->info;
+	u32 cmd;
+
+	if (chip->nor.addr_width == 4 && info->set_4b)
+		info->set_4b(chip);
+
+	/* This is for direct AHB access when using Command Mode. */
+	chip->ahb_window_size = aspeed_smc_chip_set_segment(chip);
+
+	/*
+	 * base mode has not been optimized yet. use it for writes.
+	 */
+	chip->ctl_val[smc_write] = chip->ctl_val[smc_base] |
+		chip->nor.program_opcode << CONTROL_COMMAND_SHIFT |
+		CONTROL_COMMAND_MODE_WRITE;
+
+	dev_dbg(controller->dev, "write control register: %08x\n",
+		chip->ctl_val[smc_write]);
+
+	/*
+	 * TODO: Adjust clocks if fast read is supported and interpret
+	 * SPI-NOR flags to adjust controller settings.
+	 */
+	if (chip->nor.read_proto == SNOR_PROTO_1_1_1) {
+		if (chip->nor.read_dummy == 0)
+			cmd = CONTROL_COMMAND_MODE_NORMAL;
+		else
+			cmd = CONTROL_COMMAND_MODE_FREAD;
+	} else {
+		dev_err(chip->nor.dev, "unsupported SPI read mode\n");
+		return -EINVAL;
+	}
+
+	chip->ctl_val[smc_read] |= cmd |
+		CONTROL_IO_DUMMY_SET(chip->nor.read_dummy / 8);
+
+	dev_dbg(controller->dev, "base control register: %08x\n",
+		chip->ctl_val[smc_read]);
+	return 0;
+}
+
+static const struct spi_nor_controller_ops aspeed_smc_controller_ops = {
+	.prepare = aspeed_smc_prep,
+	.unprepare = aspeed_smc_unprep,
+	.read_reg = aspeed_smc_read_reg,
+	.write_reg = aspeed_smc_write_reg,
+	.read = aspeed_smc_read_user,
+	.write = aspeed_smc_write_user,
+};
+
+static int aspeed_smc_setup_flash(struct aspeed_smc_controller *controller,
+				  struct device_node *np, struct resource *r)
+{
+	const struct spi_nor_hwcaps hwcaps = {
+		.mask = SNOR_HWCAPS_READ |
+			SNOR_HWCAPS_READ_FAST |
+			SNOR_HWCAPS_PP,
+	};
+	const struct aspeed_smc_info *info = controller->info;
+	struct device *dev = controller->dev;
+	struct device_node *child;
+	unsigned int cs;
+	int ret = -ENODEV;
+
+	for_each_available_child_of_node(np, child) {
+		struct aspeed_smc_chip *chip;
+		struct spi_nor *nor;
+		struct mtd_info *mtd;
+
+		/* This driver does not support NAND or NOR flash devices. */
+		if (!of_device_is_compatible(child, "jedec,spi-nor"))
+			continue;
+
+		ret = of_property_read_u32(child, "reg", &cs);
+		if (ret) {
+			dev_err(dev, "Couldn't not read chip select.\n");
+			break;
+		}
+
+		if (cs >= info->nce) {
+			dev_err(dev, "Chip select %d out of range.\n",
+				cs);
+			ret = -ERANGE;
+			break;
+		}
+
+		if (controller->chips[cs]) {
+			dev_err(dev, "Chip select %d already in use by %s\n",
+				cs, dev_name(controller->chips[cs]->nor.dev));
+			ret = -EBUSY;
+			break;
+		}
+
+		chip = devm_kzalloc(controller->dev, sizeof(*chip), GFP_KERNEL);
+		if (!chip) {
+			ret = -ENOMEM;
+			break;
+		}
+
+		chip->controller = controller;
+		chip->ctl = controller->regs + info->ctl0 + cs * 4;
+		chip->cs = cs;
+
+		nor = &chip->nor;
+		mtd = &nor->mtd;
+
+		nor->dev = dev;
+		nor->priv = chip;
+		spi_nor_set_flash_node(nor, child);
+		nor->controller_ops = &aspeed_smc_controller_ops;
+
+		ret = aspeed_smc_chip_setup_init(chip, r);
+		if (ret)
+			break;
+
+		/*
+		 * TODO: Add support for Dual and Quad SPI protocols
+		 * attach when board support is present as determined
+		 * by of property.
+		 */
+		ret = spi_nor_scan(nor, NULL, &hwcaps);
+		if (ret)
+			break;
+
+		ret = aspeed_smc_chip_setup_finish(chip);
+		if (ret)
+			break;
+
+		ret = mtd_device_register(mtd, NULL, 0);
+		if (ret)
+			break;
+
+		controller->chips[cs] = chip;
+	}
+
+	if (ret) {
+		of_node_put(child);
+		aspeed_smc_unregister(controller);
+	}
+
+	return ret;
+}
+
+static int aspeed_smc_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct device *dev = &pdev->dev;
+	struct aspeed_smc_controller *controller;
+	const struct of_device_id *match;
+	const struct aspeed_smc_info *info;
+	struct resource *res;
+	int ret;
+
+	match = of_match_device(aspeed_smc_matches, &pdev->dev);
+	if (!match || !match->data)
+		return -ENODEV;
+	info = match->data;
+
+	controller = devm_kzalloc(&pdev->dev,
+				  struct_size(controller, chips, info->nce),
+				  GFP_KERNEL);
+	if (!controller)
+		return -ENOMEM;
+	controller->info = info;
+	controller->dev = dev;
+
+	mutex_init(&controller->mutex);
+	platform_set_drvdata(pdev, controller);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	controller->regs = devm_ioremap_resource(dev, res);
+	if (IS_ERR(controller->regs))
+		return PTR_ERR(controller->regs);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	controller->ahb_base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(controller->ahb_base))
+		return PTR_ERR(controller->ahb_base);
+
+	controller->ahb_window_size = resource_size(res);
+
+	ret = aspeed_smc_setup_flash(controller, np, res);
+	if (ret)
+		dev_err(dev, "Aspeed SMC probe failed %d\n", ret);
+
+	return ret;
+}
+
+static struct platform_driver aspeed_smc_driver = {
+	.probe = aspeed_smc_probe,
+	.remove = aspeed_smc_remove,
+	.driver = {
+		.name = DEVICE_NAME,
+		.of_match_table = aspeed_smc_matches,
+	}
+};
+
+module_platform_driver(aspeed_smc_driver);
+
+MODULE_DESCRIPTION("ASPEED Static Memory Controller Driver");
+MODULE_AUTHOR("Cedric Le Goater <clg@kaod.org>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/controllers/cadence-quadspi.c
similarity index 100%
rename from drivers/mtd/spi-nor/cadence-quadspi.c
rename to drivers/mtd/spi-nor/controllers/cadence-quadspi.c
diff --git a/drivers/mtd/spi-nor/hisi-sfc.c b/drivers/mtd/spi-nor/controllers/hisi-sfc.c
similarity index 100%
rename from drivers/mtd/spi-nor/hisi-sfc.c
rename to drivers/mtd/spi-nor/controllers/hisi-sfc.c
diff --git a/drivers/mtd/spi-nor/intel-spi-pci.c b/drivers/mtd/spi-nor/controllers/intel-spi-pci.c
similarity index 100%
rename from drivers/mtd/spi-nor/intel-spi-pci.c
rename to drivers/mtd/spi-nor/controllers/intel-spi-pci.c
diff --git a/drivers/mtd/spi-nor/intel-spi-platform.c b/drivers/mtd/spi-nor/controllers/intel-spi-platform.c
similarity index 100%
rename from drivers/mtd/spi-nor/intel-spi-platform.c
rename to drivers/mtd/spi-nor/controllers/intel-spi-platform.c
diff --git a/drivers/mtd/spi-nor/intel-spi.c b/drivers/mtd/spi-nor/controllers/intel-spi.c
similarity index 100%
rename from drivers/mtd/spi-nor/intel-spi.c
rename to drivers/mtd/spi-nor/controllers/intel-spi.c
diff --git a/drivers/mtd/spi-nor/intel-spi.h b/drivers/mtd/spi-nor/controllers/intel-spi.h
similarity index 100%
rename from drivers/mtd/spi-nor/intel-spi.h
rename to drivers/mtd/spi-nor/controllers/intel-spi.h
diff --git a/drivers/mtd/spi-nor/nxp-spifi.c b/drivers/mtd/spi-nor/controllers/nxp-spifi.c
similarity index 100%
rename from drivers/mtd/spi-nor/nxp-spifi.c
rename to drivers/mtd/spi-nor/controllers/nxp-spifi.c
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
new file mode 100644
index 0000000..cc68ea8
--- /dev/null
+++ b/drivers/mtd/spi-nor/core.c
@@ -0,0 +1,3466 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Based on m25p80.c, by Mike Lavender (mike@steroidmicros.com), with
+ * influence from lart.c (Abraham Van Der Merwe) and mtd_dataflash.c
+ *
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/math64.h>
+#include <linux/sizes.h>
+#include <linux/slab.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/of_platform.h>
+#include <linux/sched/task_stack.h>
+#include <linux/spi/flash.h>
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+/* Define max times to check status register before we give up. */
+
+/*
+ * For everything but full-chip erase; probably could be much smaller, but kept
+ * around for safety for now
+ */
+#define DEFAULT_READY_WAIT_JIFFIES		(40UL * HZ)
+
+/*
+ * For full-chip erase, calibrated to a 2MB flash (M25P16); should be scaled up
+ * for larger flash
+ */
+#define CHIP_ERASE_2MB_READY_WAIT_JIFFIES	(40UL * HZ)
+
+#define SPI_NOR_MAX_ADDR_WIDTH	4
+
+/**
+ * spi_nor_spimem_bounce() - check if a bounce buffer is needed for the data
+ *                           transfer
+ * @nor:        pointer to 'struct spi_nor'
+ * @op:         pointer to 'struct spi_mem_op' template for transfer
+ *
+ * If we have to use the bounce buffer, the data field in @op will be updated.
+ *
+ * Return: true if the bounce buffer is needed, false if not
+ */
+static bool spi_nor_spimem_bounce(struct spi_nor *nor, struct spi_mem_op *op)
+{
+	/* op->data.buf.in occupies the same memory as op->data.buf.out */
+	if (object_is_on_stack(op->data.buf.in) ||
+	    !virt_addr_valid(op->data.buf.in)) {
+		if (op->data.nbytes > nor->bouncebuf_size)
+			op->data.nbytes = nor->bouncebuf_size;
+		op->data.buf.in = nor->bouncebuf;
+		return true;
+	}
+
+	return false;
+}
+
+/**
+ * spi_nor_spimem_exec_op() - execute a memory operation
+ * @nor:        pointer to 'struct spi_nor'
+ * @op:         pointer to 'struct spi_mem_op' template for transfer
+ *
+ * Return: 0 on success, -error otherwise.
+ */
+static int spi_nor_spimem_exec_op(struct spi_nor *nor, struct spi_mem_op *op)
+{
+	int error;
+
+	error = spi_mem_adjust_op_size(nor->spimem, op);
+	if (error)
+		return error;
+
+	return spi_mem_exec_op(nor->spimem, op);
+}
+
+/**
+ * spi_nor_spimem_read_data() - read data from flash's memory region via
+ *                              spi-mem
+ * @nor:        pointer to 'struct spi_nor'
+ * @from:       offset to read from
+ * @len:        number of bytes to read
+ * @buf:        pointer to dst buffer
+ *
+ * Return: number of bytes read successfully, -errno otherwise
+ */
+static ssize_t spi_nor_spimem_read_data(struct spi_nor *nor, loff_t from,
+					size_t len, u8 *buf)
+{
+	struct spi_mem_op op =
+		SPI_MEM_OP(SPI_MEM_OP_CMD(nor->read_opcode, 1),
+			   SPI_MEM_OP_ADDR(nor->addr_width, from, 1),
+			   SPI_MEM_OP_DUMMY(nor->read_dummy, 1),
+			   SPI_MEM_OP_DATA_IN(len, buf, 1));
+	bool usebouncebuf;
+	ssize_t nbytes;
+	int error;
+
+	/* get transfer protocols. */
+	op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(nor->read_proto);
+	op.addr.buswidth = spi_nor_get_protocol_addr_nbits(nor->read_proto);
+	op.dummy.buswidth = op.addr.buswidth;
+	op.data.buswidth = spi_nor_get_protocol_data_nbits(nor->read_proto);
+
+	/* convert the dummy cycles to the number of bytes */
+	op.dummy.nbytes = (nor->read_dummy * op.dummy.buswidth) / 8;
+
+	usebouncebuf = spi_nor_spimem_bounce(nor, &op);
+
+	if (nor->dirmap.rdesc) {
+		nbytes = spi_mem_dirmap_read(nor->dirmap.rdesc, op.addr.val,
+					     op.data.nbytes, op.data.buf.in);
+	} else {
+		error = spi_nor_spimem_exec_op(nor, &op);
+		if (error)
+			return error;
+		nbytes = op.data.nbytes;
+	}
+
+	if (usebouncebuf && nbytes > 0)
+		memcpy(buf, op.data.buf.in, nbytes);
+
+	return nbytes;
+}
+
+/**
+ * spi_nor_read_data() - read data from flash memory
+ * @nor:        pointer to 'struct spi_nor'
+ * @from:       offset to read from
+ * @len:        number of bytes to read
+ * @buf:        pointer to dst buffer
+ *
+ * Return: number of bytes read successfully, -errno otherwise
+ */
+ssize_t spi_nor_read_data(struct spi_nor *nor, loff_t from, size_t len, u8 *buf)
+{
+	if (nor->spimem)
+		return spi_nor_spimem_read_data(nor, from, len, buf);
+
+	return nor->controller_ops->read(nor, from, len, buf);
+}
+
+/**
+ * spi_nor_spimem_write_data() - write data to flash memory via
+ *                               spi-mem
+ * @nor:        pointer to 'struct spi_nor'
+ * @to:         offset to write to
+ * @len:        number of bytes to write
+ * @buf:        pointer to src buffer
+ *
+ * Return: number of bytes written successfully, -errno otherwise
+ */
+static ssize_t spi_nor_spimem_write_data(struct spi_nor *nor, loff_t to,
+					 size_t len, const u8 *buf)
+{
+	struct spi_mem_op op =
+		SPI_MEM_OP(SPI_MEM_OP_CMD(nor->program_opcode, 1),
+			   SPI_MEM_OP_ADDR(nor->addr_width, to, 1),
+			   SPI_MEM_OP_NO_DUMMY,
+			   SPI_MEM_OP_DATA_OUT(len, buf, 1));
+	ssize_t nbytes;
+	int error;
+
+	op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(nor->write_proto);
+	op.addr.buswidth = spi_nor_get_protocol_addr_nbits(nor->write_proto);
+	op.data.buswidth = spi_nor_get_protocol_data_nbits(nor->write_proto);
+
+	if (nor->program_opcode == SPINOR_OP_AAI_WP && nor->sst_write_second)
+		op.addr.nbytes = 0;
+
+	if (spi_nor_spimem_bounce(nor, &op))
+		memcpy(nor->bouncebuf, buf, op.data.nbytes);
+
+	if (nor->dirmap.wdesc) {
+		nbytes = spi_mem_dirmap_write(nor->dirmap.wdesc, op.addr.val,
+					      op.data.nbytes, op.data.buf.out);
+	} else {
+		error = spi_nor_spimem_exec_op(nor, &op);
+		if (error)
+			return error;
+		nbytes = op.data.nbytes;
+	}
+
+	return nbytes;
+}
+
+/**
+ * spi_nor_write_data() - write data to flash memory
+ * @nor:        pointer to 'struct spi_nor'
+ * @to:         offset to write to
+ * @len:        number of bytes to write
+ * @buf:        pointer to src buffer
+ *
+ * Return: number of bytes written successfully, -errno otherwise
+ */
+ssize_t spi_nor_write_data(struct spi_nor *nor, loff_t to, size_t len,
+			   const u8 *buf)
+{
+	if (nor->spimem)
+		return spi_nor_spimem_write_data(nor, to, len, buf);
+
+	return nor->controller_ops->write(nor, to, len, buf);
+}
+
+/**
+ * spi_nor_write_enable() - Set write enable latch with Write Enable command.
+ * @nor:	pointer to 'struct spi_nor'.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_write_enable(struct spi_nor *nor)
+{
+	int ret;
+
+	if (nor->spimem) {
+		struct spi_mem_op op =
+			SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WREN, 1),
+				   SPI_MEM_OP_NO_ADDR,
+				   SPI_MEM_OP_NO_DUMMY,
+				   SPI_MEM_OP_NO_DATA);
+
+		ret = spi_mem_exec_op(nor->spimem, &op);
+	} else {
+		ret = nor->controller_ops->write_reg(nor, SPINOR_OP_WREN,
+						     NULL, 0);
+	}
+
+	if (ret)
+		dev_dbg(nor->dev, "error %d on Write Enable\n", ret);
+
+	return ret;
+}
+
+/**
+ * spi_nor_write_disable() - Send Write Disable instruction to the chip.
+ * @nor:	pointer to 'struct spi_nor'.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_write_disable(struct spi_nor *nor)
+{
+	int ret;
+
+	if (nor->spimem) {
+		struct spi_mem_op op =
+			SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRDI, 1),
+				   SPI_MEM_OP_NO_ADDR,
+				   SPI_MEM_OP_NO_DUMMY,
+				   SPI_MEM_OP_NO_DATA);
+
+		ret = spi_mem_exec_op(nor->spimem, &op);
+	} else {
+		ret = nor->controller_ops->write_reg(nor, SPINOR_OP_WRDI,
+						     NULL, 0);
+	}
+
+	if (ret)
+		dev_dbg(nor->dev, "error %d on Write Disable\n", ret);
+
+	return ret;
+}
+
+/**
+ * spi_nor_read_sr() - Read the Status Register.
+ * @nor:	pointer to 'struct spi_nor'.
+ * @sr:		pointer to a DMA-able buffer where the value of the
+ *              Status Register will be written.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_read_sr(struct spi_nor *nor, u8 *sr)
+{
+	int ret;
+
+	if (nor->spimem) {
+		struct spi_mem_op op =
+			SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDSR, 1),
+				   SPI_MEM_OP_NO_ADDR,
+				   SPI_MEM_OP_NO_DUMMY,
+				   SPI_MEM_OP_DATA_IN(1, sr, 1));
+
+		ret = spi_mem_exec_op(nor->spimem, &op);
+	} else {
+		ret = nor->controller_ops->read_reg(nor, SPINOR_OP_RDSR,
+						    sr, 1);
+	}
+
+	if (ret)
+		dev_dbg(nor->dev, "error %d reading SR\n", ret);
+
+	return ret;
+}
+
+/**
+ * spi_nor_read_fsr() - Read the Flag Status Register.
+ * @nor:	pointer to 'struct spi_nor'
+ * @fsr:	pointer to a DMA-able buffer where the value of the
+ *              Flag Status Register will be written.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_read_fsr(struct spi_nor *nor, u8 *fsr)
+{
+	int ret;
+
+	if (nor->spimem) {
+		struct spi_mem_op op =
+			SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDFSR, 1),
+				   SPI_MEM_OP_NO_ADDR,
+				   SPI_MEM_OP_NO_DUMMY,
+				   SPI_MEM_OP_DATA_IN(1, fsr, 1));
+
+		ret = spi_mem_exec_op(nor->spimem, &op);
+	} else {
+		ret = nor->controller_ops->read_reg(nor, SPINOR_OP_RDFSR,
+						    fsr, 1);
+	}
+
+	if (ret)
+		dev_dbg(nor->dev, "error %d reading FSR\n", ret);
+
+	return ret;
+}
+
+/**
+ * spi_nor_read_cr() - Read the Configuration Register using the
+ * SPINOR_OP_RDCR (35h) command.
+ * @nor:	pointer to 'struct spi_nor'
+ * @cr:		pointer to a DMA-able buffer where the value of the
+ *              Configuration Register will be written.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_read_cr(struct spi_nor *nor, u8 *cr)
+{
+	int ret;
+
+	if (nor->spimem) {
+		struct spi_mem_op op =
+			SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDCR, 1),
+				   SPI_MEM_OP_NO_ADDR,
+				   SPI_MEM_OP_NO_DUMMY,
+				   SPI_MEM_OP_DATA_IN(1, cr, 1));
+
+		ret = spi_mem_exec_op(nor->spimem, &op);
+	} else {
+		ret = nor->controller_ops->read_reg(nor, SPINOR_OP_RDCR, cr, 1);
+	}
+
+	if (ret)
+		dev_dbg(nor->dev, "error %d reading CR\n", ret);
+
+	return ret;
+}
+
+/**
+ * spi_nor_set_4byte_addr_mode() - Enter/Exit 4-byte address mode.
+ * @nor:	pointer to 'struct spi_nor'.
+ * @enable:	true to enter the 4-byte address mode, false to exit the 4-byte
+ *		address mode.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_set_4byte_addr_mode(struct spi_nor *nor, bool enable)
+{
+	int ret;
+
+	if (nor->spimem) {
+		struct spi_mem_op op =
+			SPI_MEM_OP(SPI_MEM_OP_CMD(enable ?
+						  SPINOR_OP_EN4B :
+						  SPINOR_OP_EX4B,
+						  1),
+				  SPI_MEM_OP_NO_ADDR,
+				  SPI_MEM_OP_NO_DUMMY,
+				  SPI_MEM_OP_NO_DATA);
+
+		ret = spi_mem_exec_op(nor->spimem, &op);
+	} else {
+		ret = nor->controller_ops->write_reg(nor,
+						     enable ? SPINOR_OP_EN4B :
+							      SPINOR_OP_EX4B,
+						     NULL, 0);
+	}
+
+	if (ret)
+		dev_dbg(nor->dev, "error %d setting 4-byte mode\n", ret);
+
+	return ret;
+}
+
+/**
+ * spansion_set_4byte_addr_mode() - Set 4-byte address mode for Spansion
+ * flashes.
+ * @nor:	pointer to 'struct spi_nor'.
+ * @enable:	true to enter the 4-byte address mode, false to exit the 4-byte
+ *		address mode.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spansion_set_4byte_addr_mode(struct spi_nor *nor, bool enable)
+{
+	int ret;
+
+	nor->bouncebuf[0] = enable << 7;
+
+	if (nor->spimem) {
+		struct spi_mem_op op =
+			SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_BRWR, 1),
+				   SPI_MEM_OP_NO_ADDR,
+				   SPI_MEM_OP_NO_DUMMY,
+				   SPI_MEM_OP_DATA_OUT(1, nor->bouncebuf, 1));
+
+		ret = spi_mem_exec_op(nor->spimem, &op);
+	} else {
+		ret = nor->controller_ops->write_reg(nor, SPINOR_OP_BRWR,
+						     nor->bouncebuf, 1);
+	}
+
+	if (ret)
+		dev_dbg(nor->dev, "error %d setting 4-byte mode\n", ret);
+
+	return ret;
+}
+
+/**
+ * spi_nor_write_ear() - Write Extended Address Register.
+ * @nor:	pointer to 'struct spi_nor'.
+ * @ear:	value to write to the Extended Address Register.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_write_ear(struct spi_nor *nor, u8 ear)
+{
+	int ret;
+
+	nor->bouncebuf[0] = ear;
+
+	if (nor->spimem) {
+		struct spi_mem_op op =
+			SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WREAR, 1),
+				   SPI_MEM_OP_NO_ADDR,
+				   SPI_MEM_OP_NO_DUMMY,
+				   SPI_MEM_OP_DATA_OUT(1, nor->bouncebuf, 1));
+
+		ret = spi_mem_exec_op(nor->spimem, &op);
+	} else {
+		ret = nor->controller_ops->write_reg(nor, SPINOR_OP_WREAR,
+						     nor->bouncebuf, 1);
+	}
+
+	if (ret)
+		dev_dbg(nor->dev, "error %d writing EAR\n", ret);
+
+	return ret;
+}
+
+/**
+ * spi_nor_xread_sr() - Read the Status Register on S3AN flashes.
+ * @nor:	pointer to 'struct spi_nor'.
+ * @sr:		pointer to a DMA-able buffer where the value of the
+ *              Status Register will be written.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_xread_sr(struct spi_nor *nor, u8 *sr)
+{
+	int ret;
+
+	if (nor->spimem) {
+		struct spi_mem_op op =
+			SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_XRDSR, 1),
+				   SPI_MEM_OP_NO_ADDR,
+				   SPI_MEM_OP_NO_DUMMY,
+				   SPI_MEM_OP_DATA_IN(1, sr, 1));
+
+		ret = spi_mem_exec_op(nor->spimem, &op);
+	} else {
+		ret = nor->controller_ops->read_reg(nor, SPINOR_OP_XRDSR,
+						    sr, 1);
+	}
+
+	if (ret)
+		dev_dbg(nor->dev, "error %d reading XRDSR\n", ret);
+
+	return ret;
+}
+
+/**
+ * spi_nor_xsr_ready() - Query the Status Register of the S3AN flash to see if
+ * the flash is ready for new commands.
+ * @nor:	pointer to 'struct spi_nor'.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_xsr_ready(struct spi_nor *nor)
+{
+	int ret;
+
+	ret = spi_nor_xread_sr(nor, nor->bouncebuf);
+	if (ret)
+		return ret;
+
+	return !!(nor->bouncebuf[0] & XSR_RDY);
+}
+
+/**
+ * spi_nor_clear_sr() - Clear the Status Register.
+ * @nor:	pointer to 'struct spi_nor'.
+ */
+static void spi_nor_clear_sr(struct spi_nor *nor)
+{
+	int ret;
+
+	if (nor->spimem) {
+		struct spi_mem_op op =
+			SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_CLSR, 1),
+				   SPI_MEM_OP_NO_ADDR,
+				   SPI_MEM_OP_NO_DUMMY,
+				   SPI_MEM_OP_NO_DATA);
+
+		ret = spi_mem_exec_op(nor->spimem, &op);
+	} else {
+		ret = nor->controller_ops->write_reg(nor, SPINOR_OP_CLSR,
+						     NULL, 0);
+	}
+
+	if (ret)
+		dev_dbg(nor->dev, "error %d clearing SR\n", ret);
+}
+
+/**
+ * spi_nor_sr_ready() - Query the Status Register to see if the flash is ready
+ * for new commands.
+ * @nor:	pointer to 'struct spi_nor'.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_sr_ready(struct spi_nor *nor)
+{
+	int ret = spi_nor_read_sr(nor, nor->bouncebuf);
+
+	if (ret)
+		return ret;
+
+	if (nor->flags & SNOR_F_USE_CLSR &&
+	    nor->bouncebuf[0] & (SR_E_ERR | SR_P_ERR)) {
+		if (nor->bouncebuf[0] & SR_E_ERR)
+			dev_err(nor->dev, "Erase Error occurred\n");
+		else
+			dev_err(nor->dev, "Programming Error occurred\n");
+
+		spi_nor_clear_sr(nor);
+
+		/*
+		 * WEL bit remains set to one when an erase or page program
+		 * error occurs. Issue a Write Disable command to protect
+		 * against inadvertent writes that can possibly corrupt the
+		 * contents of the memory.
+		 */
+		ret = spi_nor_write_disable(nor);
+		if (ret)
+			return ret;
+
+		return -EIO;
+	}
+
+	return !(nor->bouncebuf[0] & SR_WIP);
+}
+
+/**
+ * spi_nor_clear_fsr() - Clear the Flag Status Register.
+ * @nor:	pointer to 'struct spi_nor'.
+ */
+static void spi_nor_clear_fsr(struct spi_nor *nor)
+{
+	int ret;
+
+	if (nor->spimem) {
+		struct spi_mem_op op =
+			SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_CLFSR, 1),
+				   SPI_MEM_OP_NO_ADDR,
+				   SPI_MEM_OP_NO_DUMMY,
+				   SPI_MEM_OP_NO_DATA);
+
+		ret = spi_mem_exec_op(nor->spimem, &op);
+	} else {
+		ret = nor->controller_ops->write_reg(nor, SPINOR_OP_CLFSR,
+						     NULL, 0);
+	}
+
+	if (ret)
+		dev_dbg(nor->dev, "error %d clearing FSR\n", ret);
+}
+
+/**
+ * spi_nor_fsr_ready() - Query the Flag Status Register to see if the flash is
+ * ready for new commands.
+ * @nor:	pointer to 'struct spi_nor'.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_fsr_ready(struct spi_nor *nor)
+{
+	int ret = spi_nor_read_fsr(nor, nor->bouncebuf);
+
+	if (ret)
+		return ret;
+
+	if (nor->bouncebuf[0] & (FSR_E_ERR | FSR_P_ERR)) {
+		if (nor->bouncebuf[0] & FSR_E_ERR)
+			dev_err(nor->dev, "Erase operation failed.\n");
+		else
+			dev_err(nor->dev, "Program operation failed.\n");
+
+		if (nor->bouncebuf[0] & FSR_PT_ERR)
+			dev_err(nor->dev,
+			"Attempted to modify a protected sector.\n");
+
+		spi_nor_clear_fsr(nor);
+
+		/*
+		 * WEL bit remains set to one when an erase or page program
+		 * error occurs. Issue a Write Disable command to protect
+		 * against inadvertent writes that can possibly corrupt the
+		 * contents of the memory.
+		 */
+		ret = spi_nor_write_disable(nor);
+		if (ret)
+			return ret;
+
+		return -EIO;
+	}
+
+	return nor->bouncebuf[0] & FSR_READY;
+}
+
+/**
+ * spi_nor_ready() - Query the flash to see if it is ready for new commands.
+ * @nor:	pointer to 'struct spi_nor'.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_ready(struct spi_nor *nor)
+{
+	int sr, fsr;
+
+	if (nor->flags & SNOR_F_READY_XSR_RDY)
+		sr = spi_nor_xsr_ready(nor);
+	else
+		sr = spi_nor_sr_ready(nor);
+	if (sr < 0)
+		return sr;
+	fsr = nor->flags & SNOR_F_USE_FSR ? spi_nor_fsr_ready(nor) : 1;
+	if (fsr < 0)
+		return fsr;
+	return sr && fsr;
+}
+
+/**
+ * spi_nor_wait_till_ready_with_timeout() - Service routine to read the
+ * Status Register until ready, or timeout occurs.
+ * @nor:		pointer to "struct spi_nor".
+ * @timeout_jiffies:	jiffies to wait until timeout.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_wait_till_ready_with_timeout(struct spi_nor *nor,
+						unsigned long timeout_jiffies)
+{
+	unsigned long deadline;
+	int timeout = 0, ret;
+
+	deadline = jiffies + timeout_jiffies;
+
+	while (!timeout) {
+		if (time_after_eq(jiffies, deadline))
+			timeout = 1;
+
+		ret = spi_nor_ready(nor);
+		if (ret < 0)
+			return ret;
+		if (ret)
+			return 0;
+
+		cond_resched();
+	}
+
+	dev_dbg(nor->dev, "flash operation timed out\n");
+
+	return -ETIMEDOUT;
+}
+
+/**
+ * spi_nor_wait_till_ready() - Wait for a predefined amount of time for the
+ * flash to be ready, or timeout occurs.
+ * @nor:	pointer to "struct spi_nor".
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_wait_till_ready(struct spi_nor *nor)
+{
+	return spi_nor_wait_till_ready_with_timeout(nor,
+						    DEFAULT_READY_WAIT_JIFFIES);
+}
+
+/**
+ * spi_nor_write_sr() - Write the Status Register.
+ * @nor:	pointer to 'struct spi_nor'.
+ * @sr:		pointer to DMA-able buffer to write to the Status Register.
+ * @len:	number of bytes to write to the Status Register.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_write_sr(struct spi_nor *nor, const u8 *sr, size_t len)
+{
+	int ret;
+
+	ret = spi_nor_write_enable(nor);
+	if (ret)
+		return ret;
+
+	if (nor->spimem) {
+		struct spi_mem_op op =
+			SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRSR, 1),
+				   SPI_MEM_OP_NO_ADDR,
+				   SPI_MEM_OP_NO_DUMMY,
+				   SPI_MEM_OP_DATA_OUT(len, sr, 1));
+
+		ret = spi_mem_exec_op(nor->spimem, &op);
+	} else {
+		ret = nor->controller_ops->write_reg(nor, SPINOR_OP_WRSR,
+						     sr, len);
+	}
+
+	if (ret) {
+		dev_dbg(nor->dev, "error %d writing SR\n", ret);
+		return ret;
+	}
+
+	return spi_nor_wait_till_ready(nor);
+}
+
+/**
+ * spi_nor_write_sr1_and_check() - Write one byte to the Status Register 1 and
+ * ensure that the byte written match the received value.
+ * @nor:	pointer to a 'struct spi_nor'.
+ * @sr1:	byte value to be written to the Status Register.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_write_sr1_and_check(struct spi_nor *nor, u8 sr1)
+{
+	int ret;
+
+	nor->bouncebuf[0] = sr1;
+
+	ret = spi_nor_write_sr(nor, nor->bouncebuf, 1);
+	if (ret)
+		return ret;
+
+	ret = spi_nor_read_sr(nor, nor->bouncebuf);
+	if (ret)
+		return ret;
+
+	if (nor->bouncebuf[0] != sr1) {
+		dev_dbg(nor->dev, "SR1: read back test failed\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/**
+ * spi_nor_write_16bit_sr_and_check() - Write the Status Register 1 and the
+ * Status Register 2 in one shot. Ensure that the byte written in the Status
+ * Register 1 match the received value, and that the 16-bit Write did not
+ * affect what was already in the Status Register 2.
+ * @nor:	pointer to a 'struct spi_nor'.
+ * @sr1:	byte value to be written to the Status Register 1.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_write_16bit_sr_and_check(struct spi_nor *nor, u8 sr1)
+{
+	int ret;
+	u8 *sr_cr = nor->bouncebuf;
+	u8 cr_written;
+
+	/* Make sure we don't overwrite the contents of Status Register 2. */
+	if (!(nor->flags & SNOR_F_NO_READ_CR)) {
+		ret = spi_nor_read_cr(nor, &sr_cr[1]);
+		if (ret)
+			return ret;
+	} else if (nor->params->quad_enable) {
+		/*
+		 * If the Status Register 2 Read command (35h) is not
+		 * supported, we should at least be sure we don't
+		 * change the value of the SR2 Quad Enable bit.
+		 *
+		 * We can safely assume that when the Quad Enable method is
+		 * set, the value of the QE bit is one, as a consequence of the
+		 * nor->params->quad_enable() call.
+		 *
+		 * We can safely assume that the Quad Enable bit is present in
+		 * the Status Register 2 at BIT(1). According to the JESD216
+		 * revB standard, BFPT DWORDS[15], bits 22:20, the 16-bit
+		 * Write Status (01h) command is available just for the cases
+		 * in which the QE bit is described in SR2 at BIT(1).
+		 */
+		sr_cr[1] = SR2_QUAD_EN_BIT1;
+	} else {
+		sr_cr[1] = 0;
+	}
+
+	sr_cr[0] = sr1;
+
+	ret = spi_nor_write_sr(nor, sr_cr, 2);
+	if (ret)
+		return ret;
+
+	if (nor->flags & SNOR_F_NO_READ_CR)
+		return 0;
+
+	cr_written = sr_cr[1];
+
+	ret = spi_nor_read_cr(nor, &sr_cr[1]);
+	if (ret)
+		return ret;
+
+	if (cr_written != sr_cr[1]) {
+		dev_dbg(nor->dev, "CR: read back test failed\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/**
+ * spi_nor_write_16bit_cr_and_check() - Write the Status Register 1 and the
+ * Configuration Register in one shot. Ensure that the byte written in the
+ * Configuration Register match the received value, and that the 16-bit Write
+ * did not affect what was already in the Status Register 1.
+ * @nor:	pointer to a 'struct spi_nor'.
+ * @cr:		byte value to be written to the Configuration Register.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_write_16bit_cr_and_check(struct spi_nor *nor, u8 cr)
+{
+	int ret;
+	u8 *sr_cr = nor->bouncebuf;
+	u8 sr_written;
+
+	/* Keep the current value of the Status Register 1. */
+	ret = spi_nor_read_sr(nor, sr_cr);
+	if (ret)
+		return ret;
+
+	sr_cr[1] = cr;
+
+	ret = spi_nor_write_sr(nor, sr_cr, 2);
+	if (ret)
+		return ret;
+
+	sr_written = sr_cr[0];
+
+	ret = spi_nor_read_sr(nor, sr_cr);
+	if (ret)
+		return ret;
+
+	if (sr_written != sr_cr[0]) {
+		dev_dbg(nor->dev, "SR: Read back test failed\n");
+		return -EIO;
+	}
+
+	if (nor->flags & SNOR_F_NO_READ_CR)
+		return 0;
+
+	ret = spi_nor_read_cr(nor, &sr_cr[1]);
+	if (ret)
+		return ret;
+
+	if (cr != sr_cr[1]) {
+		dev_dbg(nor->dev, "CR: read back test failed\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/**
+ * spi_nor_write_sr_and_check() - Write the Status Register 1 and ensure that
+ * the byte written match the received value without affecting other bits in the
+ * Status Register 1 and 2.
+ * @nor:	pointer to a 'struct spi_nor'.
+ * @sr1:	byte value to be written to the Status Register.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_write_sr_and_check(struct spi_nor *nor, u8 sr1)
+{
+	if (nor->flags & SNOR_F_HAS_16BIT_SR)
+		return spi_nor_write_16bit_sr_and_check(nor, sr1);
+
+	return spi_nor_write_sr1_and_check(nor, sr1);
+}
+
+/**
+ * spi_nor_write_sr2() - Write the Status Register 2 using the
+ * SPINOR_OP_WRSR2 (3eh) command.
+ * @nor:	pointer to 'struct spi_nor'.
+ * @sr2:	pointer to DMA-able buffer to write to the Status Register 2.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_write_sr2(struct spi_nor *nor, const u8 *sr2)
+{
+	int ret;
+
+	ret = spi_nor_write_enable(nor);
+	if (ret)
+		return ret;
+
+	if (nor->spimem) {
+		struct spi_mem_op op =
+			SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRSR2, 1),
+				   SPI_MEM_OP_NO_ADDR,
+				   SPI_MEM_OP_NO_DUMMY,
+				   SPI_MEM_OP_DATA_OUT(1, sr2, 1));
+
+		ret = spi_mem_exec_op(nor->spimem, &op);
+	} else {
+		ret = nor->controller_ops->write_reg(nor, SPINOR_OP_WRSR2,
+						     sr2, 1);
+	}
+
+	if (ret) {
+		dev_dbg(nor->dev, "error %d writing SR2\n", ret);
+		return ret;
+	}
+
+	return spi_nor_wait_till_ready(nor);
+}
+
+/**
+ * spi_nor_read_sr2() - Read the Status Register 2 using the
+ * SPINOR_OP_RDSR2 (3fh) command.
+ * @nor:	pointer to 'struct spi_nor'.
+ * @sr2:	pointer to DMA-able buffer where the value of the
+ *		Status Register 2 will be written.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_read_sr2(struct spi_nor *nor, u8 *sr2)
+{
+	int ret;
+
+	if (nor->spimem) {
+		struct spi_mem_op op =
+			SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDSR2, 1),
+				   SPI_MEM_OP_NO_ADDR,
+				   SPI_MEM_OP_NO_DUMMY,
+				   SPI_MEM_OP_DATA_IN(1, sr2, 1));
+
+		ret = spi_mem_exec_op(nor->spimem, &op);
+	} else {
+		ret = nor->controller_ops->read_reg(nor, SPINOR_OP_RDSR2,
+						    sr2, 1);
+	}
+
+	if (ret)
+		dev_dbg(nor->dev, "error %d reading SR2\n", ret);
+
+	return ret;
+}
+
+/**
+ * spi_nor_erase_chip() - Erase the entire flash memory.
+ * @nor:	pointer to 'struct spi_nor'.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_erase_chip(struct spi_nor *nor)
+{
+	int ret;
+
+	dev_dbg(nor->dev, " %lldKiB\n", (long long)(nor->mtd.size >> 10));
+
+	if (nor->spimem) {
+		struct spi_mem_op op =
+			SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_CHIP_ERASE, 1),
+				   SPI_MEM_OP_NO_ADDR,
+				   SPI_MEM_OP_NO_DUMMY,
+				   SPI_MEM_OP_NO_DATA);
+
+		ret = spi_mem_exec_op(nor->spimem, &op);
+	} else {
+		ret = nor->controller_ops->write_reg(nor, SPINOR_OP_CHIP_ERASE,
+						     NULL, 0);
+	}
+
+	if (ret)
+		dev_dbg(nor->dev, "error %d erasing chip\n", ret);
+
+	return ret;
+}
+
+static u8 spi_nor_convert_opcode(u8 opcode, const u8 table[][2], size_t size)
+{
+	size_t i;
+
+	for (i = 0; i < size; i++)
+		if (table[i][0] == opcode)
+			return table[i][1];
+
+	/* No conversion found, keep input op code. */
+	return opcode;
+}
+
+u8 spi_nor_convert_3to4_read(u8 opcode)
+{
+	static const u8 spi_nor_3to4_read[][2] = {
+		{ SPINOR_OP_READ,	SPINOR_OP_READ_4B },
+		{ SPINOR_OP_READ_FAST,	SPINOR_OP_READ_FAST_4B },
+		{ SPINOR_OP_READ_1_1_2,	SPINOR_OP_READ_1_1_2_4B },
+		{ SPINOR_OP_READ_1_2_2,	SPINOR_OP_READ_1_2_2_4B },
+		{ SPINOR_OP_READ_1_1_4,	SPINOR_OP_READ_1_1_4_4B },
+		{ SPINOR_OP_READ_1_4_4,	SPINOR_OP_READ_1_4_4_4B },
+		{ SPINOR_OP_READ_1_1_8,	SPINOR_OP_READ_1_1_8_4B },
+		{ SPINOR_OP_READ_1_8_8,	SPINOR_OP_READ_1_8_8_4B },
+
+		{ SPINOR_OP_READ_1_1_1_DTR,	SPINOR_OP_READ_1_1_1_DTR_4B },
+		{ SPINOR_OP_READ_1_2_2_DTR,	SPINOR_OP_READ_1_2_2_DTR_4B },
+		{ SPINOR_OP_READ_1_4_4_DTR,	SPINOR_OP_READ_1_4_4_DTR_4B },
+	};
+
+	return spi_nor_convert_opcode(opcode, spi_nor_3to4_read,
+				      ARRAY_SIZE(spi_nor_3to4_read));
+}
+
+static u8 spi_nor_convert_3to4_program(u8 opcode)
+{
+	static const u8 spi_nor_3to4_program[][2] = {
+		{ SPINOR_OP_PP,		SPINOR_OP_PP_4B },
+		{ SPINOR_OP_PP_1_1_4,	SPINOR_OP_PP_1_1_4_4B },
+		{ SPINOR_OP_PP_1_4_4,	SPINOR_OP_PP_1_4_4_4B },
+		{ SPINOR_OP_PP_1_1_8,	SPINOR_OP_PP_1_1_8_4B },
+		{ SPINOR_OP_PP_1_8_8,	SPINOR_OP_PP_1_8_8_4B },
+	};
+
+	return spi_nor_convert_opcode(opcode, spi_nor_3to4_program,
+				      ARRAY_SIZE(spi_nor_3to4_program));
+}
+
+static u8 spi_nor_convert_3to4_erase(u8 opcode)
+{
+	static const u8 spi_nor_3to4_erase[][2] = {
+		{ SPINOR_OP_BE_4K,	SPINOR_OP_BE_4K_4B },
+		{ SPINOR_OP_BE_32K,	SPINOR_OP_BE_32K_4B },
+		{ SPINOR_OP_SE,		SPINOR_OP_SE_4B },
+	};
+
+	return spi_nor_convert_opcode(opcode, spi_nor_3to4_erase,
+				      ARRAY_SIZE(spi_nor_3to4_erase));
+}
+
+static bool spi_nor_has_uniform_erase(const struct spi_nor *nor)
+{
+	return !!nor->params->erase_map.uniform_erase_type;
+}
+
+static void spi_nor_set_4byte_opcodes(struct spi_nor *nor)
+{
+	nor->read_opcode = spi_nor_convert_3to4_read(nor->read_opcode);
+	nor->program_opcode = spi_nor_convert_3to4_program(nor->program_opcode);
+	nor->erase_opcode = spi_nor_convert_3to4_erase(nor->erase_opcode);
+
+	if (!spi_nor_has_uniform_erase(nor)) {
+		struct spi_nor_erase_map *map = &nor->params->erase_map;
+		struct spi_nor_erase_type *erase;
+		int i;
+
+		for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) {
+			erase = &map->erase_type[i];
+			erase->opcode =
+				spi_nor_convert_3to4_erase(erase->opcode);
+		}
+	}
+}
+
+int spi_nor_lock_and_prep(struct spi_nor *nor)
+{
+	int ret = 0;
+
+	mutex_lock(&nor->lock);
+
+	if (nor->controller_ops &&  nor->controller_ops->prepare) {
+		ret = nor->controller_ops->prepare(nor);
+		if (ret) {
+			mutex_unlock(&nor->lock);
+			return ret;
+		}
+	}
+	return ret;
+}
+
+void spi_nor_unlock_and_unprep(struct spi_nor *nor)
+{
+	if (nor->controller_ops && nor->controller_ops->unprepare)
+		nor->controller_ops->unprepare(nor);
+	mutex_unlock(&nor->lock);
+}
+
+static u32 spi_nor_convert_addr(struct spi_nor *nor, loff_t addr)
+{
+	if (!nor->params->convert_addr)
+		return addr;
+
+	return nor->params->convert_addr(nor, addr);
+}
+
+/*
+ * Initiate the erasure of a single sector
+ */
+static int spi_nor_erase_sector(struct spi_nor *nor, u32 addr)
+{
+	int i;
+
+	addr = spi_nor_convert_addr(nor, addr);
+
+	if (nor->spimem) {
+		struct spi_mem_op op =
+			SPI_MEM_OP(SPI_MEM_OP_CMD(nor->erase_opcode, 1),
+				   SPI_MEM_OP_ADDR(nor->addr_width, addr, 1),
+				   SPI_MEM_OP_NO_DUMMY,
+				   SPI_MEM_OP_NO_DATA);
+
+		return spi_mem_exec_op(nor->spimem, &op);
+	} else if (nor->controller_ops->erase) {
+		return nor->controller_ops->erase(nor, addr);
+	}
+
+	/*
+	 * Default implementation, if driver doesn't have a specialized HW
+	 * control
+	 */
+	for (i = nor->addr_width - 1; i >= 0; i--) {
+		nor->bouncebuf[i] = addr & 0xff;
+		addr >>= 8;
+	}
+
+	return nor->controller_ops->write_reg(nor, nor->erase_opcode,
+					      nor->bouncebuf, nor->addr_width);
+}
+
+/**
+ * spi_nor_div_by_erase_size() - calculate remainder and update new dividend
+ * @erase:	pointer to a structure that describes a SPI NOR erase type
+ * @dividend:	dividend value
+ * @remainder:	pointer to u32 remainder (will be updated)
+ *
+ * Return: the result of the division
+ */
+static u64 spi_nor_div_by_erase_size(const struct spi_nor_erase_type *erase,
+				     u64 dividend, u32 *remainder)
+{
+	/* JEDEC JESD216B Standard imposes erase sizes to be power of 2. */
+	*remainder = (u32)dividend & erase->size_mask;
+	return dividend >> erase->size_shift;
+}
+
+/**
+ * spi_nor_find_best_erase_type() - find the best erase type for the given
+ *				    offset in the serial flash memory and the
+ *				    number of bytes to erase. The region in
+ *				    which the address fits is expected to be
+ *				    provided.
+ * @map:	the erase map of the SPI NOR
+ * @region:	pointer to a structure that describes a SPI NOR erase region
+ * @addr:	offset in the serial flash memory
+ * @len:	number of bytes to erase
+ *
+ * Return: a pointer to the best fitted erase type, NULL otherwise.
+ */
+static const struct spi_nor_erase_type *
+spi_nor_find_best_erase_type(const struct spi_nor_erase_map *map,
+			     const struct spi_nor_erase_region *region,
+			     u64 addr, u32 len)
+{
+	const struct spi_nor_erase_type *erase;
+	u32 rem;
+	int i;
+	u8 erase_mask = region->offset & SNOR_ERASE_TYPE_MASK;
+
+	/*
+	 * Erase types are ordered by size, with the smallest erase type at
+	 * index 0.
+	 */
+	for (i = SNOR_ERASE_TYPE_MAX - 1; i >= 0; i--) {
+		/* Does the erase region support the tested erase type? */
+		if (!(erase_mask & BIT(i)))
+			continue;
+
+		erase = &map->erase_type[i];
+
+		/* Don't erase more than what the user has asked for. */
+		if (erase->size > len)
+			continue;
+
+		/* Alignment is not mandatory for overlaid regions */
+		if (region->offset & SNOR_OVERLAID_REGION)
+			return erase;
+
+		spi_nor_div_by_erase_size(erase, addr, &rem);
+		if (rem)
+			continue;
+		else
+			return erase;
+	}
+
+	return NULL;
+}
+
+static u64 spi_nor_region_is_last(const struct spi_nor_erase_region *region)
+{
+	return region->offset & SNOR_LAST_REGION;
+}
+
+static u64 spi_nor_region_end(const struct spi_nor_erase_region *region)
+{
+	return (region->offset & ~SNOR_ERASE_FLAGS_MASK) + region->size;
+}
+
+/**
+ * spi_nor_region_next() - get the next spi nor region
+ * @region:	pointer to a structure that describes a SPI NOR erase region
+ *
+ * Return: the next spi nor region or NULL if last region.
+ */
+struct spi_nor_erase_region *
+spi_nor_region_next(struct spi_nor_erase_region *region)
+{
+	if (spi_nor_region_is_last(region))
+		return NULL;
+	region++;
+	return region;
+}
+
+/**
+ * spi_nor_find_erase_region() - find the region of the serial flash memory in
+ *				 which the offset fits
+ * @map:	the erase map of the SPI NOR
+ * @addr:	offset in the serial flash memory
+ *
+ * Return: a pointer to the spi_nor_erase_region struct, ERR_PTR(-errno)
+ *	   otherwise.
+ */
+static struct spi_nor_erase_region *
+spi_nor_find_erase_region(const struct spi_nor_erase_map *map, u64 addr)
+{
+	struct spi_nor_erase_region *region = map->regions;
+	u64 region_start = region->offset & ~SNOR_ERASE_FLAGS_MASK;
+	u64 region_end = region_start + region->size;
+
+	while (addr < region_start || addr >= region_end) {
+		region = spi_nor_region_next(region);
+		if (!region)
+			return ERR_PTR(-EINVAL);
+
+		region_start = region->offset & ~SNOR_ERASE_FLAGS_MASK;
+		region_end = region_start + region->size;
+	}
+
+	return region;
+}
+
+/**
+ * spi_nor_init_erase_cmd() - initialize an erase command
+ * @region:	pointer to a structure that describes a SPI NOR erase region
+ * @erase:	pointer to a structure that describes a SPI NOR erase type
+ *
+ * Return: the pointer to the allocated erase command, ERR_PTR(-errno)
+ *	   otherwise.
+ */
+static struct spi_nor_erase_command *
+spi_nor_init_erase_cmd(const struct spi_nor_erase_region *region,
+		       const struct spi_nor_erase_type *erase)
+{
+	struct spi_nor_erase_command *cmd;
+
+	cmd = kmalloc(sizeof(*cmd), GFP_KERNEL);
+	if (!cmd)
+		return ERR_PTR(-ENOMEM);
+
+	INIT_LIST_HEAD(&cmd->list);
+	cmd->opcode = erase->opcode;
+	cmd->count = 1;
+
+	if (region->offset & SNOR_OVERLAID_REGION)
+		cmd->size = region->size;
+	else
+		cmd->size = erase->size;
+
+	return cmd;
+}
+
+/**
+ * spi_nor_destroy_erase_cmd_list() - destroy erase command list
+ * @erase_list:	list of erase commands
+ */
+static void spi_nor_destroy_erase_cmd_list(struct list_head *erase_list)
+{
+	struct spi_nor_erase_command *cmd, *next;
+
+	list_for_each_entry_safe(cmd, next, erase_list, list) {
+		list_del(&cmd->list);
+		kfree(cmd);
+	}
+}
+
+/**
+ * spi_nor_init_erase_cmd_list() - initialize erase command list
+ * @nor:	pointer to a 'struct spi_nor'
+ * @erase_list:	list of erase commands to be executed once we validate that the
+ *		erase can be performed
+ * @addr:	offset in the serial flash memory
+ * @len:	number of bytes to erase
+ *
+ * Builds the list of best fitted erase commands and verifies if the erase can
+ * be performed.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_init_erase_cmd_list(struct spi_nor *nor,
+				       struct list_head *erase_list,
+				       u64 addr, u32 len)
+{
+	const struct spi_nor_erase_map *map = &nor->params->erase_map;
+	const struct spi_nor_erase_type *erase, *prev_erase = NULL;
+	struct spi_nor_erase_region *region;
+	struct spi_nor_erase_command *cmd = NULL;
+	u64 region_end;
+	int ret = -EINVAL;
+
+	region = spi_nor_find_erase_region(map, addr);
+	if (IS_ERR(region))
+		return PTR_ERR(region);
+
+	region_end = spi_nor_region_end(region);
+
+	while (len) {
+		erase = spi_nor_find_best_erase_type(map, region, addr, len);
+		if (!erase)
+			goto destroy_erase_cmd_list;
+
+		if (prev_erase != erase ||
+		    region->offset & SNOR_OVERLAID_REGION) {
+			cmd = spi_nor_init_erase_cmd(region, erase);
+			if (IS_ERR(cmd)) {
+				ret = PTR_ERR(cmd);
+				goto destroy_erase_cmd_list;
+			}
+
+			list_add_tail(&cmd->list, erase_list);
+		} else {
+			cmd->count++;
+		}
+
+		addr += cmd->size;
+		len -= cmd->size;
+
+		if (len && addr >= region_end) {
+			region = spi_nor_region_next(region);
+			if (!region)
+				goto destroy_erase_cmd_list;
+			region_end = spi_nor_region_end(region);
+		}
+
+		prev_erase = erase;
+	}
+
+	return 0;
+
+destroy_erase_cmd_list:
+	spi_nor_destroy_erase_cmd_list(erase_list);
+	return ret;
+}
+
+/**
+ * spi_nor_erase_multi_sectors() - perform a non-uniform erase
+ * @nor:	pointer to a 'struct spi_nor'
+ * @addr:	offset in the serial flash memory
+ * @len:	number of bytes to erase
+ *
+ * Build a list of best fitted erase commands and execute it once we validate
+ * that the erase can be performed.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_erase_multi_sectors(struct spi_nor *nor, u64 addr, u32 len)
+{
+	LIST_HEAD(erase_list);
+	struct spi_nor_erase_command *cmd, *next;
+	int ret;
+
+	ret = spi_nor_init_erase_cmd_list(nor, &erase_list, addr, len);
+	if (ret)
+		return ret;
+
+	list_for_each_entry_safe(cmd, next, &erase_list, list) {
+		nor->erase_opcode = cmd->opcode;
+		while (cmd->count) {
+			ret = spi_nor_write_enable(nor);
+			if (ret)
+				goto destroy_erase_cmd_list;
+
+			ret = spi_nor_erase_sector(nor, addr);
+			if (ret)
+				goto destroy_erase_cmd_list;
+
+			addr += cmd->size;
+			cmd->count--;
+
+			ret = spi_nor_wait_till_ready(nor);
+			if (ret)
+				goto destroy_erase_cmd_list;
+		}
+		list_del(&cmd->list);
+		kfree(cmd);
+	}
+
+	return 0;
+
+destroy_erase_cmd_list:
+	spi_nor_destroy_erase_cmd_list(&erase_list);
+	return ret;
+}
+
+/*
+ * Erase an address range on the nor chip.  The address range may extend
+ * one or more erase sectors.  Return an error is there is a problem erasing.
+ */
+static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+	struct spi_nor *nor = mtd_to_spi_nor(mtd);
+	u32 addr, len;
+	uint32_t rem;
+	int ret;
+
+	dev_dbg(nor->dev, "at 0x%llx, len %lld\n", (long long)instr->addr,
+			(long long)instr->len);
+
+	if (spi_nor_has_uniform_erase(nor)) {
+		div_u64_rem(instr->len, mtd->erasesize, &rem);
+		if (rem)
+			return -EINVAL;
+	}
+
+	addr = instr->addr;
+	len = instr->len;
+
+	ret = spi_nor_lock_and_prep(nor);
+	if (ret)
+		return ret;
+
+	/* whole-chip erase? */
+	if (len == mtd->size && !(nor->flags & SNOR_F_NO_OP_CHIP_ERASE)) {
+		unsigned long timeout;
+
+		ret = spi_nor_write_enable(nor);
+		if (ret)
+			goto erase_err;
+
+		ret = spi_nor_erase_chip(nor);
+		if (ret)
+			goto erase_err;
+
+		/*
+		 * Scale the timeout linearly with the size of the flash, with
+		 * a minimum calibrated to an old 2MB flash. We could try to
+		 * pull these from CFI/SFDP, but these values should be good
+		 * enough for now.
+		 */
+		timeout = max(CHIP_ERASE_2MB_READY_WAIT_JIFFIES,
+			      CHIP_ERASE_2MB_READY_WAIT_JIFFIES *
+			      (unsigned long)(mtd->size / SZ_2M));
+		ret = spi_nor_wait_till_ready_with_timeout(nor, timeout);
+		if (ret)
+			goto erase_err;
+
+	/* REVISIT in some cases we could speed up erasing large regions
+	 * by using SPINOR_OP_SE instead of SPINOR_OP_BE_4K.  We may have set up
+	 * to use "small sector erase", but that's not always optimal.
+	 */
+
+	/* "sector"-at-a-time erase */
+	} else if (spi_nor_has_uniform_erase(nor)) {
+		while (len) {
+			ret = spi_nor_write_enable(nor);
+			if (ret)
+				goto erase_err;
+
+			ret = spi_nor_erase_sector(nor, addr);
+			if (ret)
+				goto erase_err;
+
+			addr += mtd->erasesize;
+			len -= mtd->erasesize;
+
+			ret = spi_nor_wait_till_ready(nor);
+			if (ret)
+				goto erase_err;
+		}
+
+	/* erase multiple sectors */
+	} else {
+		ret = spi_nor_erase_multi_sectors(nor, addr, len);
+		if (ret)
+			goto erase_err;
+	}
+
+	ret = spi_nor_write_disable(nor);
+
+erase_err:
+	spi_nor_unlock_and_unprep(nor);
+
+	return ret;
+}
+
+static u8 spi_nor_get_sr_bp_mask(struct spi_nor *nor)
+{
+	u8 mask = SR_BP2 | SR_BP1 | SR_BP0;
+
+	if (nor->flags & SNOR_F_HAS_SR_BP3_BIT6)
+		return mask | SR_BP3_BIT6;
+
+	if (nor->flags & SNOR_F_HAS_4BIT_BP)
+		return mask | SR_BP3;
+
+	return mask;
+}
+
+static u8 spi_nor_get_sr_tb_mask(struct spi_nor *nor)
+{
+	if (nor->flags & SNOR_F_HAS_SR_TB_BIT6)
+		return SR_TB_BIT6;
+	else
+		return SR_TB_BIT5;
+}
+
+static u64 spi_nor_get_min_prot_length_sr(struct spi_nor *nor)
+{
+	unsigned int bp_slots, bp_slots_needed;
+	u8 mask = spi_nor_get_sr_bp_mask(nor);
+
+	/* Reserved one for "protect none" and one for "protect all". */
+	bp_slots = (1 << hweight8(mask)) - 2;
+	bp_slots_needed = ilog2(nor->info->n_sectors);
+
+	if (bp_slots_needed > bp_slots)
+		return nor->info->sector_size <<
+			(bp_slots_needed - bp_slots);
+	else
+		return nor->info->sector_size;
+}
+
+static void spi_nor_get_locked_range_sr(struct spi_nor *nor, u8 sr, loff_t *ofs,
+					uint64_t *len)
+{
+	struct mtd_info *mtd = &nor->mtd;
+	u64 min_prot_len;
+	u8 mask = spi_nor_get_sr_bp_mask(nor);
+	u8 tb_mask = spi_nor_get_sr_tb_mask(nor);
+	u8 bp, val = sr & mask;
+
+	if (nor->flags & SNOR_F_HAS_SR_BP3_BIT6 && val & SR_BP3_BIT6)
+		val = (val & ~SR_BP3_BIT6) | SR_BP3;
+
+	bp = val >> SR_BP_SHIFT;
+
+	if (!bp) {
+		/* No protection */
+		*ofs = 0;
+		*len = 0;
+		return;
+	}
+
+	min_prot_len = spi_nor_get_min_prot_length_sr(nor);
+	*len = min_prot_len << (bp - 1);
+
+	if (*len > mtd->size)
+		*len = mtd->size;
+
+	if (nor->flags & SNOR_F_HAS_SR_TB && sr & tb_mask)
+		*ofs = 0;
+	else
+		*ofs = mtd->size - *len;
+}
+
+/*
+ * Return 1 if the entire region is locked (if @locked is true) or unlocked (if
+ * @locked is false); 0 otherwise
+ */
+static int spi_nor_check_lock_status_sr(struct spi_nor *nor, loff_t ofs,
+					uint64_t len, u8 sr, bool locked)
+{
+	loff_t lock_offs;
+	uint64_t lock_len;
+
+	if (!len)
+		return 1;
+
+	spi_nor_get_locked_range_sr(nor, sr, &lock_offs, &lock_len);
+
+	if (locked)
+		/* Requested range is a sub-range of locked range */
+		return (ofs + len <= lock_offs + lock_len) && (ofs >= lock_offs);
+	else
+		/* Requested range does not overlap with locked range */
+		return (ofs >= lock_offs + lock_len) || (ofs + len <= lock_offs);
+}
+
+static int spi_nor_is_locked_sr(struct spi_nor *nor, loff_t ofs, uint64_t len,
+				u8 sr)
+{
+	return spi_nor_check_lock_status_sr(nor, ofs, len, sr, true);
+}
+
+static int spi_nor_is_unlocked_sr(struct spi_nor *nor, loff_t ofs, uint64_t len,
+				  u8 sr)
+{
+	return spi_nor_check_lock_status_sr(nor, ofs, len, sr, false);
+}
+
+/*
+ * Lock a region of the flash. Compatible with ST Micro and similar flash.
+ * Supports the block protection bits BP{0,1,2}/BP{0,1,2,3} in the status
+ * register
+ * (SR). Does not support these features found in newer SR bitfields:
+ *   - SEC: sector/block protect - only handle SEC=0 (block protect)
+ *   - CMP: complement protect - only support CMP=0 (range is not complemented)
+ *
+ * Support for the following is provided conditionally for some flash:
+ *   - TB: top/bottom protect
+ *
+ * Sample table portion for 8MB flash (Winbond w25q64fw):
+ *
+ *   SEC  |  TB   |  BP2  |  BP1  |  BP0  |  Prot Length  | Protected Portion
+ *  --------------------------------------------------------------------------
+ *    X   |   X   |   0   |   0   |   0   |  NONE         | NONE
+ *    0   |   0   |   0   |   0   |   1   |  128 KB       | Upper 1/64
+ *    0   |   0   |   0   |   1   |   0   |  256 KB       | Upper 1/32
+ *    0   |   0   |   0   |   1   |   1   |  512 KB       | Upper 1/16
+ *    0   |   0   |   1   |   0   |   0   |  1 MB         | Upper 1/8
+ *    0   |   0   |   1   |   0   |   1   |  2 MB         | Upper 1/4
+ *    0   |   0   |   1   |   1   |   0   |  4 MB         | Upper 1/2
+ *    X   |   X   |   1   |   1   |   1   |  8 MB         | ALL
+ *  ------|-------|-------|-------|-------|---------------|-------------------
+ *    0   |   1   |   0   |   0   |   1   |  128 KB       | Lower 1/64
+ *    0   |   1   |   0   |   1   |   0   |  256 KB       | Lower 1/32
+ *    0   |   1   |   0   |   1   |   1   |  512 KB       | Lower 1/16
+ *    0   |   1   |   1   |   0   |   0   |  1 MB         | Lower 1/8
+ *    0   |   1   |   1   |   0   |   1   |  2 MB         | Lower 1/4
+ *    0   |   1   |   1   |   1   |   0   |  4 MB         | Lower 1/2
+ *
+ * Returns negative on errors, 0 on success.
+ */
+static int spi_nor_sr_lock(struct spi_nor *nor, loff_t ofs, uint64_t len)
+{
+	struct mtd_info *mtd = &nor->mtd;
+	u64 min_prot_len;
+	int ret, status_old, status_new;
+	u8 mask = spi_nor_get_sr_bp_mask(nor);
+	u8 tb_mask = spi_nor_get_sr_tb_mask(nor);
+	u8 pow, val;
+	loff_t lock_len;
+	bool can_be_top = true, can_be_bottom = nor->flags & SNOR_F_HAS_SR_TB;
+	bool use_top;
+
+	ret = spi_nor_read_sr(nor, nor->bouncebuf);
+	if (ret)
+		return ret;
+
+	status_old = nor->bouncebuf[0];
+
+	/* If nothing in our range is unlocked, we don't need to do anything */
+	if (spi_nor_is_locked_sr(nor, ofs, len, status_old))
+		return 0;
+
+	/* If anything below us is unlocked, we can't use 'bottom' protection */
+	if (!spi_nor_is_locked_sr(nor, 0, ofs, status_old))
+		can_be_bottom = false;
+
+	/* If anything above us is unlocked, we can't use 'top' protection */
+	if (!spi_nor_is_locked_sr(nor, ofs + len, mtd->size - (ofs + len),
+				  status_old))
+		can_be_top = false;
+
+	if (!can_be_bottom && !can_be_top)
+		return -EINVAL;
+
+	/* Prefer top, if both are valid */
+	use_top = can_be_top;
+
+	/* lock_len: length of region that should end up locked */
+	if (use_top)
+		lock_len = mtd->size - ofs;
+	else
+		lock_len = ofs + len;
+
+	if (lock_len == mtd->size) {
+		val = mask;
+	} else {
+		min_prot_len = spi_nor_get_min_prot_length_sr(nor);
+		pow = ilog2(lock_len) - ilog2(min_prot_len) + 1;
+		val = pow << SR_BP_SHIFT;
+
+		if (nor->flags & SNOR_F_HAS_SR_BP3_BIT6 && val & SR_BP3)
+			val = (val & ~SR_BP3) | SR_BP3_BIT6;
+
+		if (val & ~mask)
+			return -EINVAL;
+
+		/* Don't "lock" with no region! */
+		if (!(val & mask))
+			return -EINVAL;
+	}
+
+	status_new = (status_old & ~mask & ~tb_mask) | val;
+
+	/* Disallow further writes if WP pin is asserted */
+	status_new |= SR_SRWD;
+
+	if (!use_top)
+		status_new |= tb_mask;
+
+	/* Don't bother if they're the same */
+	if (status_new == status_old)
+		return 0;
+
+	/* Only modify protection if it will not unlock other areas */
+	if ((status_new & mask) < (status_old & mask))
+		return -EINVAL;
+
+	return spi_nor_write_sr_and_check(nor, status_new);
+}
+
+/*
+ * Unlock a region of the flash. See spi_nor_sr_lock() for more info
+ *
+ * Returns negative on errors, 0 on success.
+ */
+static int spi_nor_sr_unlock(struct spi_nor *nor, loff_t ofs, uint64_t len)
+{
+	struct mtd_info *mtd = &nor->mtd;
+	u64 min_prot_len;
+	int ret, status_old, status_new;
+	u8 mask = spi_nor_get_sr_bp_mask(nor);
+	u8 tb_mask = spi_nor_get_sr_tb_mask(nor);
+	u8 pow, val;
+	loff_t lock_len;
+	bool can_be_top = true, can_be_bottom = nor->flags & SNOR_F_HAS_SR_TB;
+	bool use_top;
+
+	ret = spi_nor_read_sr(nor, nor->bouncebuf);
+	if (ret)
+		return ret;
+
+	status_old = nor->bouncebuf[0];
+
+	/* If nothing in our range is locked, we don't need to do anything */
+	if (spi_nor_is_unlocked_sr(nor, ofs, len, status_old))
+		return 0;
+
+	/* If anything below us is locked, we can't use 'top' protection */
+	if (!spi_nor_is_unlocked_sr(nor, 0, ofs, status_old))
+		can_be_top = false;
+
+	/* If anything above us is locked, we can't use 'bottom' protection */
+	if (!spi_nor_is_unlocked_sr(nor, ofs + len, mtd->size - (ofs + len),
+				    status_old))
+		can_be_bottom = false;
+
+	if (!can_be_bottom && !can_be_top)
+		return -EINVAL;
+
+	/* Prefer top, if both are valid */
+	use_top = can_be_top;
+
+	/* lock_len: length of region that should remain locked */
+	if (use_top)
+		lock_len = mtd->size - (ofs + len);
+	else
+		lock_len = ofs;
+
+	if (lock_len == 0) {
+		val = 0; /* fully unlocked */
+	} else {
+		min_prot_len = spi_nor_get_min_prot_length_sr(nor);
+		pow = ilog2(lock_len) - ilog2(min_prot_len) + 1;
+		val = pow << SR_BP_SHIFT;
+
+		if (nor->flags & SNOR_F_HAS_SR_BP3_BIT6 && val & SR_BP3)
+			val = (val & ~SR_BP3) | SR_BP3_BIT6;
+
+		/* Some power-of-two sizes are not supported */
+		if (val & ~mask)
+			return -EINVAL;
+	}
+
+	status_new = (status_old & ~mask & ~tb_mask) | val;
+
+	/* Don't protect status register if we're fully unlocked */
+	if (lock_len == 0)
+		status_new &= ~SR_SRWD;
+
+	if (!use_top)
+		status_new |= tb_mask;
+
+	/* Don't bother if they're the same */
+	if (status_new == status_old)
+		return 0;
+
+	/* Only modify protection if it will not lock other areas */
+	if ((status_new & mask) > (status_old & mask))
+		return -EINVAL;
+
+	return spi_nor_write_sr_and_check(nor, status_new);
+}
+
+/*
+ * Check if a region of the flash is (completely) locked. See spi_nor_sr_lock()
+ * for more info.
+ *
+ * Returns 1 if entire region is locked, 0 if any portion is unlocked, and
+ * negative on errors.
+ */
+static int spi_nor_sr_is_locked(struct spi_nor *nor, loff_t ofs, uint64_t len)
+{
+	int ret;
+
+	ret = spi_nor_read_sr(nor, nor->bouncebuf);
+	if (ret)
+		return ret;
+
+	return spi_nor_is_locked_sr(nor, ofs, len, nor->bouncebuf[0]);
+}
+
+static const struct spi_nor_locking_ops spi_nor_sr_locking_ops = {
+	.lock = spi_nor_sr_lock,
+	.unlock = spi_nor_sr_unlock,
+	.is_locked = spi_nor_sr_is_locked,
+};
+
+static int spi_nor_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+	struct spi_nor *nor = mtd_to_spi_nor(mtd);
+	int ret;
+
+	ret = spi_nor_lock_and_prep(nor);
+	if (ret)
+		return ret;
+
+	ret = nor->params->locking_ops->lock(nor, ofs, len);
+
+	spi_nor_unlock_and_unprep(nor);
+	return ret;
+}
+
+static int spi_nor_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+	struct spi_nor *nor = mtd_to_spi_nor(mtd);
+	int ret;
+
+	ret = spi_nor_lock_and_prep(nor);
+	if (ret)
+		return ret;
+
+	ret = nor->params->locking_ops->unlock(nor, ofs, len);
+
+	spi_nor_unlock_and_unprep(nor);
+	return ret;
+}
+
+static int spi_nor_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+	struct spi_nor *nor = mtd_to_spi_nor(mtd);
+	int ret;
+
+	ret = spi_nor_lock_and_prep(nor);
+	if (ret)
+		return ret;
+
+	ret = nor->params->locking_ops->is_locked(nor, ofs, len);
+
+	spi_nor_unlock_and_unprep(nor);
+	return ret;
+}
+
+/**
+ * spi_nor_sr1_bit6_quad_enable() - Set the Quad Enable BIT(6) in the Status
+ * Register 1.
+ * @nor:	pointer to a 'struct spi_nor'
+ *
+ * Bit 6 of the Status Register 1 is the QE bit for Macronix like QSPI memories.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_sr1_bit6_quad_enable(struct spi_nor *nor)
+{
+	int ret;
+
+	ret = spi_nor_read_sr(nor, nor->bouncebuf);
+	if (ret)
+		return ret;
+
+	if (nor->bouncebuf[0] & SR1_QUAD_EN_BIT6)
+		return 0;
+
+	nor->bouncebuf[0] |= SR1_QUAD_EN_BIT6;
+
+	return spi_nor_write_sr1_and_check(nor, nor->bouncebuf[0]);
+}
+
+/**
+ * spi_nor_sr2_bit1_quad_enable() - set the Quad Enable BIT(1) in the Status
+ * Register 2.
+ * @nor:       pointer to a 'struct spi_nor'.
+ *
+ * Bit 1 of the Status Register 2 is the QE bit for Spansion like QSPI memories.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_sr2_bit1_quad_enable(struct spi_nor *nor)
+{
+	int ret;
+
+	if (nor->flags & SNOR_F_NO_READ_CR)
+		return spi_nor_write_16bit_cr_and_check(nor, SR2_QUAD_EN_BIT1);
+
+	ret = spi_nor_read_cr(nor, nor->bouncebuf);
+	if (ret)
+		return ret;
+
+	if (nor->bouncebuf[0] & SR2_QUAD_EN_BIT1)
+		return 0;
+
+	nor->bouncebuf[0] |= SR2_QUAD_EN_BIT1;
+
+	return spi_nor_write_16bit_cr_and_check(nor, nor->bouncebuf[0]);
+}
+
+/**
+ * spi_nor_sr2_bit7_quad_enable() - set QE bit in Status Register 2.
+ * @nor:	pointer to a 'struct spi_nor'
+ *
+ * Set the Quad Enable (QE) bit in the Status Register 2.
+ *
+ * This is one of the procedures to set the QE bit described in the SFDP
+ * (JESD216 rev B) specification but no manufacturer using this procedure has
+ * been identified yet, hence the name of the function.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_sr2_bit7_quad_enable(struct spi_nor *nor)
+{
+	u8 *sr2 = nor->bouncebuf;
+	int ret;
+	u8 sr2_written;
+
+	/* Check current Quad Enable bit value. */
+	ret = spi_nor_read_sr2(nor, sr2);
+	if (ret)
+		return ret;
+	if (*sr2 & SR2_QUAD_EN_BIT7)
+		return 0;
+
+	/* Update the Quad Enable bit. */
+	*sr2 |= SR2_QUAD_EN_BIT7;
+
+	ret = spi_nor_write_sr2(nor, sr2);
+	if (ret)
+		return ret;
+
+	sr2_written = *sr2;
+
+	/* Read back and check it. */
+	ret = spi_nor_read_sr2(nor, sr2);
+	if (ret)
+		return ret;
+
+	if (*sr2 != sr2_written) {
+		dev_dbg(nor->dev, "SR2: Read back test failed\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static const struct spi_nor_manufacturer *manufacturers[] = {
+	&spi_nor_atmel,
+	&spi_nor_catalyst,
+	&spi_nor_eon,
+	&spi_nor_esmt,
+	&spi_nor_everspin,
+	&spi_nor_fujitsu,
+	&spi_nor_gigadevice,
+	&spi_nor_intel,
+	&spi_nor_issi,
+	&spi_nor_macronix,
+	&spi_nor_micron,
+	&spi_nor_st,
+	&spi_nor_spansion,
+	&spi_nor_sst,
+	&spi_nor_winbond,
+	&spi_nor_xilinx,
+	&spi_nor_xmc,
+};
+
+static const struct flash_info *
+spi_nor_search_part_by_id(const struct flash_info *parts, unsigned int nparts,
+			  const u8 *id)
+{
+	unsigned int i;
+
+	for (i = 0; i < nparts; i++) {
+		if (parts[i].id_len &&
+		    !memcmp(parts[i].id, id, parts[i].id_len))
+			return &parts[i];
+	}
+
+	return NULL;
+}
+
+static const struct flash_info *spi_nor_read_id(struct spi_nor *nor)
+{
+	const struct flash_info *info;
+	u8 *id = nor->bouncebuf;
+	unsigned int i;
+	int ret;
+
+	if (nor->spimem) {
+		struct spi_mem_op op =
+			SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDID, 1),
+				   SPI_MEM_OP_NO_ADDR,
+				   SPI_MEM_OP_NO_DUMMY,
+				   SPI_MEM_OP_DATA_IN(SPI_NOR_MAX_ID_LEN, id, 1));
+
+		ret = spi_mem_exec_op(nor->spimem, &op);
+	} else {
+		ret = nor->controller_ops->read_reg(nor, SPINOR_OP_RDID, id,
+						    SPI_NOR_MAX_ID_LEN);
+	}
+	if (ret) {
+		dev_dbg(nor->dev, "error %d reading JEDEC ID\n", ret);
+		return ERR_PTR(ret);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(manufacturers); i++) {
+		info = spi_nor_search_part_by_id(manufacturers[i]->parts,
+						 manufacturers[i]->nparts,
+						 id);
+		if (info) {
+			nor->manufacturer = manufacturers[i];
+			return info;
+		}
+	}
+
+	dev_err(nor->dev, "unrecognized JEDEC id bytes: %*ph\n",
+		SPI_NOR_MAX_ID_LEN, id);
+	return ERR_PTR(-ENODEV);
+}
+
+static int spi_nor_read(struct mtd_info *mtd, loff_t from, size_t len,
+			size_t *retlen, u_char *buf)
+{
+	struct spi_nor *nor = mtd_to_spi_nor(mtd);
+	ssize_t ret;
+
+	dev_dbg(nor->dev, "from 0x%08x, len %zd\n", (u32)from, len);
+
+	ret = spi_nor_lock_and_prep(nor);
+	if (ret)
+		return ret;
+
+	while (len) {
+		loff_t addr = from;
+
+		addr = spi_nor_convert_addr(nor, addr);
+
+		ret = spi_nor_read_data(nor, addr, len, buf);
+		if (ret == 0) {
+			/* We shouldn't see 0-length reads */
+			ret = -EIO;
+			goto read_err;
+		}
+		if (ret < 0)
+			goto read_err;
+
+		WARN_ON(ret > len);
+		*retlen += ret;
+		buf += ret;
+		from += ret;
+		len -= ret;
+	}
+	ret = 0;
+
+read_err:
+	spi_nor_unlock_and_unprep(nor);
+	return ret;
+}
+
+/*
+ * Write an address range to the nor chip.  Data must be written in
+ * FLASH_PAGESIZE chunks.  The address range may be any size provided
+ * it is within the physical boundaries.
+ */
+static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
+	size_t *retlen, const u_char *buf)
+{
+	struct spi_nor *nor = mtd_to_spi_nor(mtd);
+	size_t page_offset, page_remain, i;
+	ssize_t ret;
+
+	dev_dbg(nor->dev, "to 0x%08x, len %zd\n", (u32)to, len);
+
+	ret = spi_nor_lock_and_prep(nor);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < len; ) {
+		ssize_t written;
+		loff_t addr = to + i;
+
+		/*
+		 * If page_size is a power of two, the offset can be quickly
+		 * calculated with an AND operation. On the other cases we
+		 * need to do a modulus operation (more expensive).
+		 * Power of two numbers have only one bit set and we can use
+		 * the instruction hweight32 to detect if we need to do a
+		 * modulus (do_div()) or not.
+		 */
+		if (hweight32(nor->page_size) == 1) {
+			page_offset = addr & (nor->page_size - 1);
+		} else {
+			uint64_t aux = addr;
+
+			page_offset = do_div(aux, nor->page_size);
+		}
+		/* the size of data remaining on the first page */
+		page_remain = min_t(size_t,
+				    nor->page_size - page_offset, len - i);
+
+		addr = spi_nor_convert_addr(nor, addr);
+
+		ret = spi_nor_write_enable(nor);
+		if (ret)
+			goto write_err;
+
+		ret = spi_nor_write_data(nor, addr, page_remain, buf + i);
+		if (ret < 0)
+			goto write_err;
+		written = ret;
+
+		ret = spi_nor_wait_till_ready(nor);
+		if (ret)
+			goto write_err;
+		*retlen += written;
+		i += written;
+	}
+
+write_err:
+	spi_nor_unlock_and_unprep(nor);
+	return ret;
+}
+
+static int spi_nor_check(struct spi_nor *nor)
+{
+	if (!nor->dev ||
+	    (!nor->spimem && !nor->controller_ops) ||
+	    (!nor->spimem && nor->controller_ops &&
+	    (!nor->controller_ops->read ||
+	     !nor->controller_ops->write ||
+	     !nor->controller_ops->read_reg ||
+	     !nor->controller_ops->write_reg))) {
+		pr_err("spi-nor: please fill all the necessary fields!\n");
+		return -EINVAL;
+	}
+
+	if (nor->spimem && nor->controller_ops) {
+		dev_err(nor->dev, "nor->spimem and nor->controller_ops are mutually exclusive, please set just one of them.\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void
+spi_nor_set_read_settings(struct spi_nor_read_command *read,
+			  u8 num_mode_clocks,
+			  u8 num_wait_states,
+			  u8 opcode,
+			  enum spi_nor_protocol proto)
+{
+	read->num_mode_clocks = num_mode_clocks;
+	read->num_wait_states = num_wait_states;
+	read->opcode = opcode;
+	read->proto = proto;
+}
+
+void spi_nor_set_pp_settings(struct spi_nor_pp_command *pp, u8 opcode,
+			     enum spi_nor_protocol proto)
+{
+	pp->opcode = opcode;
+	pp->proto = proto;
+}
+
+static int spi_nor_hwcaps2cmd(u32 hwcaps, const int table[][2], size_t size)
+{
+	size_t i;
+
+	for (i = 0; i < size; i++)
+		if (table[i][0] == (int)hwcaps)
+			return table[i][1];
+
+	return -EINVAL;
+}
+
+int spi_nor_hwcaps_read2cmd(u32 hwcaps)
+{
+	static const int hwcaps_read2cmd[][2] = {
+		{ SNOR_HWCAPS_READ,		SNOR_CMD_READ },
+		{ SNOR_HWCAPS_READ_FAST,	SNOR_CMD_READ_FAST },
+		{ SNOR_HWCAPS_READ_1_1_1_DTR,	SNOR_CMD_READ_1_1_1_DTR },
+		{ SNOR_HWCAPS_READ_1_1_2,	SNOR_CMD_READ_1_1_2 },
+		{ SNOR_HWCAPS_READ_1_2_2,	SNOR_CMD_READ_1_2_2 },
+		{ SNOR_HWCAPS_READ_2_2_2,	SNOR_CMD_READ_2_2_2 },
+		{ SNOR_HWCAPS_READ_1_2_2_DTR,	SNOR_CMD_READ_1_2_2_DTR },
+		{ SNOR_HWCAPS_READ_1_1_4,	SNOR_CMD_READ_1_1_4 },
+		{ SNOR_HWCAPS_READ_1_4_4,	SNOR_CMD_READ_1_4_4 },
+		{ SNOR_HWCAPS_READ_4_4_4,	SNOR_CMD_READ_4_4_4 },
+		{ SNOR_HWCAPS_READ_1_4_4_DTR,	SNOR_CMD_READ_1_4_4_DTR },
+		{ SNOR_HWCAPS_READ_1_1_8,	SNOR_CMD_READ_1_1_8 },
+		{ SNOR_HWCAPS_READ_1_8_8,	SNOR_CMD_READ_1_8_8 },
+		{ SNOR_HWCAPS_READ_8_8_8,	SNOR_CMD_READ_8_8_8 },
+		{ SNOR_HWCAPS_READ_1_8_8_DTR,	SNOR_CMD_READ_1_8_8_DTR },
+	};
+
+	return spi_nor_hwcaps2cmd(hwcaps, hwcaps_read2cmd,
+				  ARRAY_SIZE(hwcaps_read2cmd));
+}
+
+static int spi_nor_hwcaps_pp2cmd(u32 hwcaps)
+{
+	static const int hwcaps_pp2cmd[][2] = {
+		{ SNOR_HWCAPS_PP,		SNOR_CMD_PP },
+		{ SNOR_HWCAPS_PP_1_1_4,		SNOR_CMD_PP_1_1_4 },
+		{ SNOR_HWCAPS_PP_1_4_4,		SNOR_CMD_PP_1_4_4 },
+		{ SNOR_HWCAPS_PP_4_4_4,		SNOR_CMD_PP_4_4_4 },
+		{ SNOR_HWCAPS_PP_1_1_8,		SNOR_CMD_PP_1_1_8 },
+		{ SNOR_HWCAPS_PP_1_8_8,		SNOR_CMD_PP_1_8_8 },
+		{ SNOR_HWCAPS_PP_8_8_8,		SNOR_CMD_PP_8_8_8 },
+	};
+
+	return spi_nor_hwcaps2cmd(hwcaps, hwcaps_pp2cmd,
+				  ARRAY_SIZE(hwcaps_pp2cmd));
+}
+
+/**
+ * spi_nor_spimem_check_op - check if the operation is supported
+ *                           by controller
+ *@nor:        pointer to a 'struct spi_nor'
+ *@op:         pointer to op template to be checked
+ *
+ * Returns 0 if operation is supported, -ENOTSUPP otherwise.
+ */
+static int spi_nor_spimem_check_op(struct spi_nor *nor,
+				   struct spi_mem_op *op)
+{
+	/*
+	 * First test with 4 address bytes. The opcode itself might
+	 * be a 3B addressing opcode but we don't care, because
+	 * SPI controller implementation should not check the opcode,
+	 * but just the sequence.
+	 */
+	op->addr.nbytes = 4;
+	if (!spi_mem_supports_op(nor->spimem, op)) {
+		if (nor->mtd.size > SZ_16M)
+			return -ENOTSUPP;
+
+		/* If flash size <= 16MB, 3 address bytes are sufficient */
+		op->addr.nbytes = 3;
+		if (!spi_mem_supports_op(nor->spimem, op))
+			return -ENOTSUPP;
+	}
+
+	return 0;
+}
+
+/**
+ * spi_nor_spimem_check_readop - check if the read op is supported
+ *                               by controller
+ *@nor:         pointer to a 'struct spi_nor'
+ *@read:        pointer to op template to be checked
+ *
+ * Returns 0 if operation is supported, -ENOTSUPP otherwise.
+ */
+static int spi_nor_spimem_check_readop(struct spi_nor *nor,
+				       const struct spi_nor_read_command *read)
+{
+	struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(read->opcode, 1),
+					  SPI_MEM_OP_ADDR(3, 0, 1),
+					  SPI_MEM_OP_DUMMY(0, 1),
+					  SPI_MEM_OP_DATA_IN(0, NULL, 1));
+
+	op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(read->proto);
+	op.addr.buswidth = spi_nor_get_protocol_addr_nbits(read->proto);
+	op.data.buswidth = spi_nor_get_protocol_data_nbits(read->proto);
+	op.dummy.buswidth = op.addr.buswidth;
+	op.dummy.nbytes = (read->num_mode_clocks + read->num_wait_states) *
+			  op.dummy.buswidth / 8;
+
+	return spi_nor_spimem_check_op(nor, &op);
+}
+
+/**
+ * spi_nor_spimem_check_pp - check if the page program op is supported
+ *                           by controller
+ *@nor:         pointer to a 'struct spi_nor'
+ *@pp:          pointer to op template to be checked
+ *
+ * Returns 0 if operation is supported, -ENOTSUPP otherwise.
+ */
+static int spi_nor_spimem_check_pp(struct spi_nor *nor,
+				   const struct spi_nor_pp_command *pp)
+{
+	struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(pp->opcode, 1),
+					  SPI_MEM_OP_ADDR(3, 0, 1),
+					  SPI_MEM_OP_NO_DUMMY,
+					  SPI_MEM_OP_DATA_OUT(0, NULL, 1));
+
+	op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(pp->proto);
+	op.addr.buswidth = spi_nor_get_protocol_addr_nbits(pp->proto);
+	op.data.buswidth = spi_nor_get_protocol_data_nbits(pp->proto);
+
+	return spi_nor_spimem_check_op(nor, &op);
+}
+
+/**
+ * spi_nor_spimem_adjust_hwcaps - Find optimal Read/Write protocol
+ *                                based on SPI controller capabilities
+ * @nor:        pointer to a 'struct spi_nor'
+ * @hwcaps:     pointer to resulting capabilities after adjusting
+ *              according to controller and flash's capability
+ */
+static void
+spi_nor_spimem_adjust_hwcaps(struct spi_nor *nor, u32 *hwcaps)
+{
+	struct spi_nor_flash_parameter *params = nor->params;
+	unsigned int cap;
+
+	/* DTR modes are not supported yet, mask them all. */
+	*hwcaps &= ~SNOR_HWCAPS_DTR;
+
+	/* X-X-X modes are not supported yet, mask them all. */
+	*hwcaps &= ~SNOR_HWCAPS_X_X_X;
+
+	for (cap = 0; cap < sizeof(*hwcaps) * BITS_PER_BYTE; cap++) {
+		int rdidx, ppidx;
+
+		if (!(*hwcaps & BIT(cap)))
+			continue;
+
+		rdidx = spi_nor_hwcaps_read2cmd(BIT(cap));
+		if (rdidx >= 0 &&
+		    spi_nor_spimem_check_readop(nor, &params->reads[rdidx]))
+			*hwcaps &= ~BIT(cap);
+
+		ppidx = spi_nor_hwcaps_pp2cmd(BIT(cap));
+		if (ppidx < 0)
+			continue;
+
+		if (spi_nor_spimem_check_pp(nor,
+					    &params->page_programs[ppidx]))
+			*hwcaps &= ~BIT(cap);
+	}
+}
+
+/**
+ * spi_nor_set_erase_type() - set a SPI NOR erase type
+ * @erase:	pointer to a structure that describes a SPI NOR erase type
+ * @size:	the size of the sector/block erased by the erase type
+ * @opcode:	the SPI command op code to erase the sector/block
+ */
+void spi_nor_set_erase_type(struct spi_nor_erase_type *erase, u32 size,
+			    u8 opcode)
+{
+	erase->size = size;
+	erase->opcode = opcode;
+	/* JEDEC JESD216B Standard imposes erase sizes to be power of 2. */
+	erase->size_shift = ffs(erase->size) - 1;
+	erase->size_mask = (1 << erase->size_shift) - 1;
+}
+
+/**
+ * spi_nor_init_uniform_erase_map() - Initialize uniform erase map
+ * @map:		the erase map of the SPI NOR
+ * @erase_mask:		bitmask encoding erase types that can erase the entire
+ *			flash memory
+ * @flash_size:		the spi nor flash memory size
+ */
+void spi_nor_init_uniform_erase_map(struct spi_nor_erase_map *map,
+				    u8 erase_mask, u64 flash_size)
+{
+	/* Offset 0 with erase_mask and SNOR_LAST_REGION bit set */
+	map->uniform_region.offset = (erase_mask & SNOR_ERASE_TYPE_MASK) |
+				     SNOR_LAST_REGION;
+	map->uniform_region.size = flash_size;
+	map->regions = &map->uniform_region;
+	map->uniform_erase_type = erase_mask;
+}
+
+int spi_nor_post_bfpt_fixups(struct spi_nor *nor,
+			     const struct sfdp_parameter_header *bfpt_header,
+			     const struct sfdp_bfpt *bfpt,
+			     struct spi_nor_flash_parameter *params)
+{
+	int ret;
+
+	if (nor->manufacturer && nor->manufacturer->fixups &&
+	    nor->manufacturer->fixups->post_bfpt) {
+		ret = nor->manufacturer->fixups->post_bfpt(nor, bfpt_header,
+							   bfpt, params);
+		if (ret)
+			return ret;
+	}
+
+	if (nor->info->fixups && nor->info->fixups->post_bfpt)
+		return nor->info->fixups->post_bfpt(nor, bfpt_header, bfpt,
+						    params);
+
+	return 0;
+}
+
+static int spi_nor_select_read(struct spi_nor *nor,
+			       u32 shared_hwcaps)
+{
+	int cmd, best_match = fls(shared_hwcaps & SNOR_HWCAPS_READ_MASK) - 1;
+	const struct spi_nor_read_command *read;
+
+	if (best_match < 0)
+		return -EINVAL;
+
+	cmd = spi_nor_hwcaps_read2cmd(BIT(best_match));
+	if (cmd < 0)
+		return -EINVAL;
+
+	read = &nor->params->reads[cmd];
+	nor->read_opcode = read->opcode;
+	nor->read_proto = read->proto;
+
+	/*
+	 * In the spi-nor framework, we don't need to make the difference
+	 * between mode clock cycles and wait state clock cycles.
+	 * Indeed, the value of the mode clock cycles is used by a QSPI
+	 * flash memory to know whether it should enter or leave its 0-4-4
+	 * (Continuous Read / XIP) mode.
+	 * eXecution In Place is out of the scope of the mtd sub-system.
+	 * Hence we choose to merge both mode and wait state clock cycles
+	 * into the so called dummy clock cycles.
+	 */
+	nor->read_dummy = read->num_mode_clocks + read->num_wait_states;
+	return 0;
+}
+
+static int spi_nor_select_pp(struct spi_nor *nor,
+			     u32 shared_hwcaps)
+{
+	int cmd, best_match = fls(shared_hwcaps & SNOR_HWCAPS_PP_MASK) - 1;
+	const struct spi_nor_pp_command *pp;
+
+	if (best_match < 0)
+		return -EINVAL;
+
+	cmd = spi_nor_hwcaps_pp2cmd(BIT(best_match));
+	if (cmd < 0)
+		return -EINVAL;
+
+	pp = &nor->params->page_programs[cmd];
+	nor->program_opcode = pp->opcode;
+	nor->write_proto = pp->proto;
+	return 0;
+}
+
+/**
+ * spi_nor_select_uniform_erase() - select optimum uniform erase type
+ * @map:		the erase map of the SPI NOR
+ * @wanted_size:	the erase type size to search for. Contains the value of
+ *			info->sector_size or of the "small sector" size in case
+ *			CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is defined.
+ *
+ * Once the optimum uniform sector erase command is found, disable all the
+ * other.
+ *
+ * Return: pointer to erase type on success, NULL otherwise.
+ */
+static const struct spi_nor_erase_type *
+spi_nor_select_uniform_erase(struct spi_nor_erase_map *map,
+			     const u32 wanted_size)
+{
+	const struct spi_nor_erase_type *tested_erase, *erase = NULL;
+	int i;
+	u8 uniform_erase_type = map->uniform_erase_type;
+
+	for (i = SNOR_ERASE_TYPE_MAX - 1; i >= 0; i--) {
+		if (!(uniform_erase_type & BIT(i)))
+			continue;
+
+		tested_erase = &map->erase_type[i];
+
+		/*
+		 * If the current erase size is the one, stop here:
+		 * we have found the right uniform Sector Erase command.
+		 */
+		if (tested_erase->size == wanted_size) {
+			erase = tested_erase;
+			break;
+		}
+
+		/*
+		 * Otherwise, the current erase size is still a valid canditate.
+		 * Select the biggest valid candidate.
+		 */
+		if (!erase && tested_erase->size)
+			erase = tested_erase;
+			/* keep iterating to find the wanted_size */
+	}
+
+	if (!erase)
+		return NULL;
+
+	/* Disable all other Sector Erase commands. */
+	map->uniform_erase_type &= ~SNOR_ERASE_TYPE_MASK;
+	map->uniform_erase_type |= BIT(erase - map->erase_type);
+	return erase;
+}
+
+static int spi_nor_select_erase(struct spi_nor *nor)
+{
+	struct spi_nor_erase_map *map = &nor->params->erase_map;
+	const struct spi_nor_erase_type *erase = NULL;
+	struct mtd_info *mtd = &nor->mtd;
+	u32 wanted_size = nor->info->sector_size;
+	int i;
+
+	/*
+	 * The previous implementation handling Sector Erase commands assumed
+	 * that the SPI flash memory has an uniform layout then used only one
+	 * of the supported erase sizes for all Sector Erase commands.
+	 * So to be backward compatible, the new implementation also tries to
+	 * manage the SPI flash memory as uniform with a single erase sector
+	 * size, when possible.
+	 */
+#ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
+	/* prefer "small sector" erase if possible */
+	wanted_size = 4096u;
+#endif
+
+	if (spi_nor_has_uniform_erase(nor)) {
+		erase = spi_nor_select_uniform_erase(map, wanted_size);
+		if (!erase)
+			return -EINVAL;
+		nor->erase_opcode = erase->opcode;
+		mtd->erasesize = erase->size;
+		return 0;
+	}
+
+	/*
+	 * For non-uniform SPI flash memory, set mtd->erasesize to the
+	 * maximum erase sector size. No need to set nor->erase_opcode.
+	 */
+	for (i = SNOR_ERASE_TYPE_MAX - 1; i >= 0; i--) {
+		if (map->erase_type[i].size) {
+			erase = &map->erase_type[i];
+			break;
+		}
+	}
+
+	if (!erase)
+		return -EINVAL;
+
+	mtd->erasesize = erase->size;
+	return 0;
+}
+
+static int spi_nor_default_setup(struct spi_nor *nor,
+				 const struct spi_nor_hwcaps *hwcaps)
+{
+	struct spi_nor_flash_parameter *params = nor->params;
+	u32 ignored_mask, shared_mask;
+	int err;
+
+	/*
+	 * Keep only the hardware capabilities supported by both the SPI
+	 * controller and the SPI flash memory.
+	 */
+	shared_mask = hwcaps->mask & params->hwcaps.mask;
+
+	if (nor->spimem) {
+		/*
+		 * When called from spi_nor_probe(), all caps are set and we
+		 * need to discard some of them based on what the SPI
+		 * controller actually supports (using spi_mem_supports_op()).
+		 */
+		spi_nor_spimem_adjust_hwcaps(nor, &shared_mask);
+	} else {
+		/*
+		 * SPI n-n-n protocols are not supported when the SPI
+		 * controller directly implements the spi_nor interface.
+		 * Yet another reason to switch to spi-mem.
+		 */
+		ignored_mask = SNOR_HWCAPS_X_X_X;
+		if (shared_mask & ignored_mask) {
+			dev_dbg(nor->dev,
+				"SPI n-n-n protocols are not supported.\n");
+			shared_mask &= ~ignored_mask;
+		}
+	}
+
+	/* Select the (Fast) Read command. */
+	err = spi_nor_select_read(nor, shared_mask);
+	if (err) {
+		dev_dbg(nor->dev,
+			"can't select read settings supported by both the SPI controller and memory.\n");
+		return err;
+	}
+
+	/* Select the Page Program command. */
+	err = spi_nor_select_pp(nor, shared_mask);
+	if (err) {
+		dev_dbg(nor->dev,
+			"can't select write settings supported by both the SPI controller and memory.\n");
+		return err;
+	}
+
+	/* Select the Sector Erase command. */
+	err = spi_nor_select_erase(nor);
+	if (err) {
+		dev_dbg(nor->dev,
+			"can't select erase settings supported by both the SPI controller and memory.\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static int spi_nor_setup(struct spi_nor *nor,
+			 const struct spi_nor_hwcaps *hwcaps)
+{
+	if (!nor->params->setup)
+		return 0;
+
+	return nor->params->setup(nor, hwcaps);
+}
+
+/**
+ * spi_nor_manufacturer_init_params() - Initialize the flash's parameters and
+ * settings based on MFR register and ->default_init() hook.
+ * @nor:	pointer to a 'struct spi-nor'.
+ */
+static void spi_nor_manufacturer_init_params(struct spi_nor *nor)
+{
+	if (nor->manufacturer && nor->manufacturer->fixups &&
+	    nor->manufacturer->fixups->default_init)
+		nor->manufacturer->fixups->default_init(nor);
+
+	if (nor->info->fixups && nor->info->fixups->default_init)
+		nor->info->fixups->default_init(nor);
+}
+
+/**
+ * spi_nor_sfdp_init_params() - Initialize the flash's parameters and settings
+ * based on JESD216 SFDP standard.
+ * @nor:	pointer to a 'struct spi-nor'.
+ *
+ * The method has a roll-back mechanism: in case the SFDP parsing fails, the
+ * legacy flash parameters and settings will be restored.
+ */
+static void spi_nor_sfdp_init_params(struct spi_nor *nor)
+{
+	struct spi_nor_flash_parameter sfdp_params;
+
+	memcpy(&sfdp_params, nor->params, sizeof(sfdp_params));
+
+	if (spi_nor_parse_sfdp(nor, &sfdp_params)) {
+		nor->addr_width = 0;
+		nor->flags &= ~SNOR_F_4B_OPCODES;
+	} else {
+		memcpy(nor->params, &sfdp_params, sizeof(*nor->params));
+	}
+}
+
+/**
+ * spi_nor_info_init_params() - Initialize the flash's parameters and settings
+ * based on nor->info data.
+ * @nor:	pointer to a 'struct spi-nor'.
+ */
+static void spi_nor_info_init_params(struct spi_nor *nor)
+{
+	struct spi_nor_flash_parameter *params = nor->params;
+	struct spi_nor_erase_map *map = &params->erase_map;
+	const struct flash_info *info = nor->info;
+	struct device_node *np = spi_nor_get_flash_node(nor);
+	u8 i, erase_mask;
+
+	/* Initialize legacy flash parameters and settings. */
+	params->quad_enable = spi_nor_sr2_bit1_quad_enable;
+	params->set_4byte_addr_mode = spansion_set_4byte_addr_mode;
+	params->setup = spi_nor_default_setup;
+	/* Default to 16-bit Write Status (01h) Command */
+	nor->flags |= SNOR_F_HAS_16BIT_SR;
+
+	/* Set SPI NOR sizes. */
+	params->size = (u64)info->sector_size * info->n_sectors;
+	params->page_size = info->page_size;
+
+	if (!(info->flags & SPI_NOR_NO_FR)) {
+		/* Default to Fast Read for DT and non-DT platform devices. */
+		params->hwcaps.mask |= SNOR_HWCAPS_READ_FAST;
+
+		/* Mask out Fast Read if not requested at DT instantiation. */
+		if (np && !of_property_read_bool(np, "m25p,fast-read"))
+			params->hwcaps.mask &= ~SNOR_HWCAPS_READ_FAST;
+	}
+
+	/* (Fast) Read settings. */
+	params->hwcaps.mask |= SNOR_HWCAPS_READ;
+	spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ],
+				  0, 0, SPINOR_OP_READ,
+				  SNOR_PROTO_1_1_1);
+
+	if (params->hwcaps.mask & SNOR_HWCAPS_READ_FAST)
+		spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ_FAST],
+					  0, 8, SPINOR_OP_READ_FAST,
+					  SNOR_PROTO_1_1_1);
+
+	if (info->flags & SPI_NOR_DUAL_READ) {
+		params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2;
+		spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ_1_1_2],
+					  0, 8, SPINOR_OP_READ_1_1_2,
+					  SNOR_PROTO_1_1_2);
+	}
+
+	if (info->flags & SPI_NOR_QUAD_READ) {
+		params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4;
+		spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ_1_1_4],
+					  0, 8, SPINOR_OP_READ_1_1_4,
+					  SNOR_PROTO_1_1_4);
+	}
+
+	if (info->flags & SPI_NOR_OCTAL_READ) {
+		params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_8;
+		spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ_1_1_8],
+					  0, 8, SPINOR_OP_READ_1_1_8,
+					  SNOR_PROTO_1_1_8);
+	}
+
+	/* Page Program settings. */
+	params->hwcaps.mask |= SNOR_HWCAPS_PP;
+	spi_nor_set_pp_settings(&params->page_programs[SNOR_CMD_PP],
+				SPINOR_OP_PP, SNOR_PROTO_1_1_1);
+
+	/*
+	 * Sector Erase settings. Sort Erase Types in ascending order, with the
+	 * smallest erase size starting at BIT(0).
+	 */
+	erase_mask = 0;
+	i = 0;
+	if (info->flags & SECT_4K_PMC) {
+		erase_mask |= BIT(i);
+		spi_nor_set_erase_type(&map->erase_type[i], 4096u,
+				       SPINOR_OP_BE_4K_PMC);
+		i++;
+	} else if (info->flags & SECT_4K) {
+		erase_mask |= BIT(i);
+		spi_nor_set_erase_type(&map->erase_type[i], 4096u,
+				       SPINOR_OP_BE_4K);
+		i++;
+	}
+	erase_mask |= BIT(i);
+	spi_nor_set_erase_type(&map->erase_type[i], info->sector_size,
+			       SPINOR_OP_SE);
+	spi_nor_init_uniform_erase_map(map, erase_mask, params->size);
+}
+
+/**
+ * spi_nor_post_sfdp_fixups() - Updates the flash's parameters and settings
+ * after SFDP has been parsed (is also called for SPI NORs that do not
+ * support RDSFDP).
+ * @nor:	pointer to a 'struct spi_nor'
+ *
+ * Typically used to tweak various parameters that could not be extracted by
+ * other means (i.e. when information provided by the SFDP/flash_info tables
+ * are incomplete or wrong).
+ */
+static void spi_nor_post_sfdp_fixups(struct spi_nor *nor)
+{
+	if (nor->manufacturer && nor->manufacturer->fixups &&
+	    nor->manufacturer->fixups->post_sfdp)
+		nor->manufacturer->fixups->post_sfdp(nor);
+
+	if (nor->info->fixups && nor->info->fixups->post_sfdp)
+		nor->info->fixups->post_sfdp(nor);
+}
+
+/**
+ * spi_nor_late_init_params() - Late initialization of default flash parameters.
+ * @nor:	pointer to a 'struct spi_nor'
+ *
+ * Used to set default flash parameters and settings when the ->default_init()
+ * hook or the SFDP parser let voids.
+ */
+static void spi_nor_late_init_params(struct spi_nor *nor)
+{
+	/*
+	 * NOR protection support. When locking_ops are not provided, we pick
+	 * the default ones.
+	 */
+	if (nor->flags & SNOR_F_HAS_LOCK && !nor->params->locking_ops)
+		nor->params->locking_ops = &spi_nor_sr_locking_ops;
+}
+
+/**
+ * spi_nor_init_params() - Initialize the flash's parameters and settings.
+ * @nor:	pointer to a 'struct spi-nor'.
+ *
+ * The flash parameters and settings are initialized based on a sequence of
+ * calls that are ordered by priority:
+ *
+ * 1/ Default flash parameters initialization. The initializations are done
+ *    based on nor->info data:
+ *		spi_nor_info_init_params()
+ *
+ * which can be overwritten by:
+ * 2/ Manufacturer flash parameters initialization. The initializations are
+ *    done based on MFR register, or when the decisions can not be done solely
+ *    based on MFR, by using specific flash_info tweeks, ->default_init():
+ *		spi_nor_manufacturer_init_params()
+ *
+ * which can be overwritten by:
+ * 3/ SFDP flash parameters initialization. JESD216 SFDP is a standard and
+ *    should be more accurate that the above.
+ *		spi_nor_sfdp_init_params()
+ *
+ *    Please note that there is a ->post_bfpt() fixup hook that can overwrite
+ *    the flash parameters and settings immediately after parsing the Basic
+ *    Flash Parameter Table.
+ *
+ * which can be overwritten by:
+ * 4/ Post SFDP flash parameters initialization. Used to tweak various
+ *    parameters that could not be extracted by other means (i.e. when
+ *    information provided by the SFDP/flash_info tables are incomplete or
+ *    wrong).
+ *		spi_nor_post_sfdp_fixups()
+ *
+ * 5/ Late default flash parameters initialization, used when the
+ * ->default_init() hook or the SFDP parser do not set specific params.
+ *		spi_nor_late_init_params()
+ */
+static int spi_nor_init_params(struct spi_nor *nor)
+{
+	nor->params = devm_kzalloc(nor->dev, sizeof(*nor->params), GFP_KERNEL);
+	if (!nor->params)
+		return -ENOMEM;
+
+	spi_nor_info_init_params(nor);
+
+	spi_nor_manufacturer_init_params(nor);
+
+	if ((nor->info->flags & (SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)) &&
+	    !(nor->info->flags & SPI_NOR_SKIP_SFDP))
+		spi_nor_sfdp_init_params(nor);
+
+	spi_nor_post_sfdp_fixups(nor);
+
+	spi_nor_late_init_params(nor);
+
+	return 0;
+}
+
+/**
+ * spi_nor_quad_enable() - enable Quad I/O if needed.
+ * @nor:                pointer to a 'struct spi_nor'
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_quad_enable(struct spi_nor *nor)
+{
+	if (!nor->params->quad_enable)
+		return 0;
+
+	if (!(spi_nor_get_protocol_width(nor->read_proto) == 4 ||
+	      spi_nor_get_protocol_width(nor->write_proto) == 4))
+		return 0;
+
+	return nor->params->quad_enable(nor);
+}
+
+/**
+ * spi_nor_unlock_all() - Unlocks the entire flash memory array.
+ * @nor:	pointer to a 'struct spi_nor'.
+ *
+ * Some SPI NOR flashes are write protected by default after a power-on reset
+ * cycle, in order to avoid inadvertent writes during power-up. Backward
+ * compatibility imposes to unlock the entire flash memory array at power-up
+ * by default.
+ */
+static int spi_nor_unlock_all(struct spi_nor *nor)
+{
+	if (nor->flags & SNOR_F_HAS_LOCK)
+		return spi_nor_unlock(&nor->mtd, 0, nor->params->size);
+
+	return 0;
+}
+
+static int spi_nor_init(struct spi_nor *nor)
+{
+	int err;
+
+	err = spi_nor_quad_enable(nor);
+	if (err) {
+		dev_dbg(nor->dev, "quad mode not supported\n");
+		return err;
+	}
+
+	err = spi_nor_unlock_all(nor);
+	if (err) {
+		dev_dbg(nor->dev, "Failed to unlock the entire flash memory array\n");
+		return err;
+	}
+
+	if (nor->addr_width == 4 && !(nor->flags & SNOR_F_4B_OPCODES)) {
+		/*
+		 * If the RESET# pin isn't hooked up properly, or the system
+		 * otherwise doesn't perform a reset command in the boot
+		 * sequence, it's impossible to 100% protect against unexpected
+		 * reboots (e.g., crashes). Warn the user (or hopefully, system
+		 * designer) that this is bad.
+		 */
+		WARN_ONCE(nor->flags & SNOR_F_BROKEN_RESET,
+			  "enabling reset hack; may not recover from unexpected reboots\n");
+		nor->params->set_4byte_addr_mode(nor, true);
+	}
+
+	return 0;
+}
+
+/* mtd resume handler */
+static void spi_nor_resume(struct mtd_info *mtd)
+{
+	struct spi_nor *nor = mtd_to_spi_nor(mtd);
+	struct device *dev = nor->dev;
+	int ret;
+
+	/* re-initialize the nor chip */
+	ret = spi_nor_init(nor);
+	if (ret)
+		dev_err(dev, "resume() failed\n");
+}
+
+void spi_nor_restore(struct spi_nor *nor)
+{
+	/* restore the addressing mode */
+	if (nor->addr_width == 4 && !(nor->flags & SNOR_F_4B_OPCODES) &&
+	    nor->flags & SNOR_F_BROKEN_RESET)
+		nor->params->set_4byte_addr_mode(nor, false);
+}
+EXPORT_SYMBOL_GPL(spi_nor_restore);
+
+static const struct flash_info *spi_nor_match_id(struct spi_nor *nor,
+						 const char *name)
+{
+	unsigned int i, j;
+
+	for (i = 0; i < ARRAY_SIZE(manufacturers); i++) {
+		for (j = 0; j < manufacturers[i]->nparts; j++) {
+			if (!strcmp(name, manufacturers[i]->parts[j].name)) {
+				nor->manufacturer = manufacturers[i];
+				return &manufacturers[i]->parts[j];
+			}
+		}
+	}
+
+	return NULL;
+}
+
+static int spi_nor_set_addr_width(struct spi_nor *nor)
+{
+	if (nor->addr_width) {
+		/* already configured from SFDP */
+	} else if (nor->info->addr_width) {
+		nor->addr_width = nor->info->addr_width;
+	} else if (nor->mtd.size > 0x1000000) {
+		/* enable 4-byte addressing if the device exceeds 16MiB */
+		nor->addr_width = 4;
+	} else {
+		nor->addr_width = 3;
+	}
+
+	if (nor->addr_width > SPI_NOR_MAX_ADDR_WIDTH) {
+		dev_dbg(nor->dev, "address width is too large: %u\n",
+			nor->addr_width);
+		return -EINVAL;
+	}
+
+	/* Set 4byte opcodes when possible. */
+	if (nor->addr_width == 4 && nor->flags & SNOR_F_4B_OPCODES &&
+	    !(nor->flags & SNOR_F_HAS_4BAIT))
+		spi_nor_set_4byte_opcodes(nor);
+
+	return 0;
+}
+
+static void spi_nor_debugfs_init(struct spi_nor *nor,
+				 const struct flash_info *info)
+{
+	struct mtd_info *mtd = &nor->mtd;
+
+	mtd->dbg.partname = info->name;
+	mtd->dbg.partid = devm_kasprintf(nor->dev, GFP_KERNEL, "spi-nor:%*phN",
+					 info->id_len, info->id);
+}
+
+static const struct flash_info *spi_nor_get_flash_info(struct spi_nor *nor,
+						       const char *name)
+{
+	const struct flash_info *info = NULL;
+
+	if (name)
+		info = spi_nor_match_id(nor, name);
+	/* Try to auto-detect if chip name wasn't specified or not found */
+	if (!info)
+		info = spi_nor_read_id(nor);
+	if (IS_ERR_OR_NULL(info))
+		return ERR_PTR(-ENOENT);
+
+	/*
+	 * If caller has specified name of flash model that can normally be
+	 * detected using JEDEC, let's verify it.
+	 */
+	if (name && info->id_len) {
+		const struct flash_info *jinfo;
+
+		jinfo = spi_nor_read_id(nor);
+		if (IS_ERR(jinfo)) {
+			return jinfo;
+		} else if (jinfo != info) {
+			/*
+			 * JEDEC knows better, so overwrite platform ID. We
+			 * can't trust partitions any longer, but we'll let
+			 * mtd apply them anyway, since some partitions may be
+			 * marked read-only, and we don't want to lose that
+			 * information, even if it's not 100% accurate.
+			 */
+			dev_warn(nor->dev, "found %s, expected %s\n",
+				 jinfo->name, info->name);
+			info = jinfo;
+		}
+	}
+
+	return info;
+}
+
+int spi_nor_scan(struct spi_nor *nor, const char *name,
+		 const struct spi_nor_hwcaps *hwcaps)
+{
+	const struct flash_info *info;
+	struct device *dev = nor->dev;
+	struct mtd_info *mtd = &nor->mtd;
+	struct device_node *np = spi_nor_get_flash_node(nor);
+	int ret;
+	int i;
+
+	ret = spi_nor_check(nor);
+	if (ret)
+		return ret;
+
+	/* Reset SPI protocol for all commands. */
+	nor->reg_proto = SNOR_PROTO_1_1_1;
+	nor->read_proto = SNOR_PROTO_1_1_1;
+	nor->write_proto = SNOR_PROTO_1_1_1;
+
+	/*
+	 * We need the bounce buffer early to read/write registers when going
+	 * through the spi-mem layer (buffers have to be DMA-able).
+	 * For spi-mem drivers, we'll reallocate a new buffer if
+	 * nor->page_size turns out to be greater than PAGE_SIZE (which
+	 * shouldn't happen before long since NOR pages are usually less
+	 * than 1KB) after spi_nor_scan() returns.
+	 */
+	nor->bouncebuf_size = PAGE_SIZE;
+	nor->bouncebuf = devm_kmalloc(dev, nor->bouncebuf_size,
+				      GFP_KERNEL);
+	if (!nor->bouncebuf)
+		return -ENOMEM;
+
+	info = spi_nor_get_flash_info(nor, name);
+	if (IS_ERR(info))
+		return PTR_ERR(info);
+
+	nor->info = info;
+
+	spi_nor_debugfs_init(nor, info);
+
+	mutex_init(&nor->lock);
+
+	/*
+	 * Make sure the XSR_RDY flag is set before calling
+	 * spi_nor_wait_till_ready(). Xilinx S3AN share MFR
+	 * with Atmel spi-nor
+	 */
+	if (info->flags & SPI_NOR_XSR_RDY)
+		nor->flags |=  SNOR_F_READY_XSR_RDY;
+
+	if (info->flags & SPI_NOR_HAS_LOCK)
+		nor->flags |= SNOR_F_HAS_LOCK;
+
+	mtd->_write = spi_nor_write;
+
+	/* Init flash parameters based on flash_info struct and SFDP */
+	ret = spi_nor_init_params(nor);
+	if (ret)
+		return ret;
+
+	if (!mtd->name)
+		mtd->name = dev_name(dev);
+	mtd->priv = nor;
+	mtd->type = MTD_NORFLASH;
+	mtd->writesize = 1;
+	mtd->flags = MTD_CAP_NORFLASH;
+	mtd->size = nor->params->size;
+	mtd->_erase = spi_nor_erase;
+	mtd->_read = spi_nor_read;
+	mtd->_resume = spi_nor_resume;
+
+	if (nor->params->locking_ops) {
+		mtd->_lock = spi_nor_lock;
+		mtd->_unlock = spi_nor_unlock;
+		mtd->_is_locked = spi_nor_is_locked;
+	}
+
+	if (info->flags & USE_FSR)
+		nor->flags |= SNOR_F_USE_FSR;
+	if (info->flags & SPI_NOR_HAS_TB) {
+		nor->flags |= SNOR_F_HAS_SR_TB;
+		if (info->flags & SPI_NOR_TB_SR_BIT6)
+			nor->flags |= SNOR_F_HAS_SR_TB_BIT6;
+	}
+
+	if (info->flags & NO_CHIP_ERASE)
+		nor->flags |= SNOR_F_NO_OP_CHIP_ERASE;
+	if (info->flags & USE_CLSR)
+		nor->flags |= SNOR_F_USE_CLSR;
+
+	if (info->flags & SPI_NOR_4BIT_BP) {
+		nor->flags |= SNOR_F_HAS_4BIT_BP;
+		if (info->flags & SPI_NOR_BP3_SR_BIT6)
+			nor->flags |= SNOR_F_HAS_SR_BP3_BIT6;
+	}
+
+	if (info->flags & SPI_NOR_NO_ERASE)
+		mtd->flags |= MTD_NO_ERASE;
+
+	mtd->dev.parent = dev;
+	nor->page_size = nor->params->page_size;
+	mtd->writebufsize = nor->page_size;
+
+	if (of_property_read_bool(np, "broken-flash-reset"))
+		nor->flags |= SNOR_F_BROKEN_RESET;
+
+	/*
+	 * Configure the SPI memory:
+	 * - select op codes for (Fast) Read, Page Program and Sector Erase.
+	 * - set the number of dummy cycles (mode cycles + wait states).
+	 * - set the SPI protocols for register and memory accesses.
+	 */
+	ret = spi_nor_setup(nor, hwcaps);
+	if (ret)
+		return ret;
+
+	if (info->flags & SPI_NOR_4B_OPCODES)
+		nor->flags |= SNOR_F_4B_OPCODES;
+
+	ret = spi_nor_set_addr_width(nor);
+	if (ret)
+		return ret;
+
+	/* Send all the required SPI flash commands to initialize device */
+	ret = spi_nor_init(nor);
+	if (ret)
+		return ret;
+
+	dev_info(dev, "%s (%lld Kbytes)\n", info->name,
+			(long long)mtd->size >> 10);
+
+	dev_dbg(dev,
+		"mtd .name = %s, .size = 0x%llx (%lldMiB), "
+		".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n",
+		mtd->name, (long long)mtd->size, (long long)(mtd->size >> 20),
+		mtd->erasesize, mtd->erasesize / 1024, mtd->numeraseregions);
+
+	if (mtd->numeraseregions)
+		for (i = 0; i < mtd->numeraseregions; i++)
+			dev_dbg(dev,
+				"mtd.eraseregions[%d] = { .offset = 0x%llx, "
+				".erasesize = 0x%.8x (%uKiB), "
+				".numblocks = %d }\n",
+				i, (long long)mtd->eraseregions[i].offset,
+				mtd->eraseregions[i].erasesize,
+				mtd->eraseregions[i].erasesize / 1024,
+				mtd->eraseregions[i].numblocks);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(spi_nor_scan);
+
+static int spi_nor_create_read_dirmap(struct spi_nor *nor)
+{
+	struct spi_mem_dirmap_info info = {
+		.op_tmpl = SPI_MEM_OP(SPI_MEM_OP_CMD(nor->read_opcode, 1),
+				      SPI_MEM_OP_ADDR(nor->addr_width, 0, 1),
+				      SPI_MEM_OP_DUMMY(nor->read_dummy, 1),
+				      SPI_MEM_OP_DATA_IN(0, NULL, 1)),
+		.offset = 0,
+		.length = nor->mtd.size,
+	};
+	struct spi_mem_op *op = &info.op_tmpl;
+
+	/* get transfer protocols. */
+	op->cmd.buswidth = spi_nor_get_protocol_inst_nbits(nor->read_proto);
+	op->addr.buswidth = spi_nor_get_protocol_addr_nbits(nor->read_proto);
+	op->dummy.buswidth = op->addr.buswidth;
+	op->data.buswidth = spi_nor_get_protocol_data_nbits(nor->read_proto);
+
+	/* convert the dummy cycles to the number of bytes */
+	op->dummy.nbytes = (nor->read_dummy * op->dummy.buswidth) / 8;
+
+	nor->dirmap.rdesc = devm_spi_mem_dirmap_create(nor->dev, nor->spimem,
+						       &info);
+	return PTR_ERR_OR_ZERO(nor->dirmap.rdesc);
+}
+
+static int spi_nor_create_write_dirmap(struct spi_nor *nor)
+{
+	struct spi_mem_dirmap_info info = {
+		.op_tmpl = SPI_MEM_OP(SPI_MEM_OP_CMD(nor->program_opcode, 1),
+				      SPI_MEM_OP_ADDR(nor->addr_width, 0, 1),
+				      SPI_MEM_OP_NO_DUMMY,
+				      SPI_MEM_OP_DATA_OUT(0, NULL, 1)),
+		.offset = 0,
+		.length = nor->mtd.size,
+	};
+	struct spi_mem_op *op = &info.op_tmpl;
+
+	/* get transfer protocols. */
+	op->cmd.buswidth = spi_nor_get_protocol_inst_nbits(nor->write_proto);
+	op->addr.buswidth = spi_nor_get_protocol_addr_nbits(nor->write_proto);
+	op->dummy.buswidth = op->addr.buswidth;
+	op->data.buswidth = spi_nor_get_protocol_data_nbits(nor->write_proto);
+
+	if (nor->program_opcode == SPINOR_OP_AAI_WP && nor->sst_write_second)
+		op->addr.nbytes = 0;
+
+	nor->dirmap.wdesc = devm_spi_mem_dirmap_create(nor->dev, nor->spimem,
+						       &info);
+	return PTR_ERR_OR_ZERO(nor->dirmap.wdesc);
+}
+
+static int spi_nor_probe(struct spi_mem *spimem)
+{
+	struct spi_device *spi = spimem->spi;
+	struct flash_platform_data *data = dev_get_platdata(&spi->dev);
+	struct spi_nor *nor;
+	/*
+	 * Enable all caps by default. The core will mask them after
+	 * checking what's really supported using spi_mem_supports_op().
+	 */
+	const struct spi_nor_hwcaps hwcaps = { .mask = SNOR_HWCAPS_ALL };
+	char *flash_name;
+	int ret;
+
+	nor = devm_kzalloc(&spi->dev, sizeof(*nor), GFP_KERNEL);
+	if (!nor)
+		return -ENOMEM;
+
+	nor->spimem = spimem;
+	nor->dev = &spi->dev;
+	spi_nor_set_flash_node(nor, spi->dev.of_node);
+
+	spi_mem_set_drvdata(spimem, nor);
+
+	if (data && data->name)
+		nor->mtd.name = data->name;
+
+	if (!nor->mtd.name)
+		nor->mtd.name = spi_mem_get_name(spimem);
+
+	/*
+	 * For some (historical?) reason many platforms provide two different
+	 * names in flash_platform_data: "name" and "type". Quite often name is
+	 * set to "m25p80" and then "type" provides a real chip name.
+	 * If that's the case, respect "type" and ignore a "name".
+	 */
+	if (data && data->type)
+		flash_name = data->type;
+	else if (!strcmp(spi->modalias, "spi-nor"))
+		flash_name = NULL; /* auto-detect */
+	else
+		flash_name = spi->modalias;
+
+	ret = spi_nor_scan(nor, flash_name, &hwcaps);
+	if (ret)
+		return ret;
+
+	/*
+	 * None of the existing parts have > 512B pages, but let's play safe
+	 * and add this logic so that if anyone ever adds support for such
+	 * a NOR we don't end up with buffer overflows.
+	 */
+	if (nor->page_size > PAGE_SIZE) {
+		nor->bouncebuf_size = nor->page_size;
+		devm_kfree(nor->dev, nor->bouncebuf);
+		nor->bouncebuf = devm_kmalloc(nor->dev,
+					      nor->bouncebuf_size,
+					      GFP_KERNEL);
+		if (!nor->bouncebuf)
+			return -ENOMEM;
+	}
+
+	ret = spi_nor_create_read_dirmap(nor);
+	if (ret)
+		return ret;
+
+	ret = spi_nor_create_write_dirmap(nor);
+	if (ret)
+		return ret;
+
+	return mtd_device_register(&nor->mtd, data ? data->parts : NULL,
+				   data ? data->nr_parts : 0);
+}
+
+static int spi_nor_remove(struct spi_mem *spimem)
+{
+	struct spi_nor *nor = spi_mem_get_drvdata(spimem);
+
+	spi_nor_restore(nor);
+
+	/* Clean up MTD stuff. */
+	return mtd_device_unregister(&nor->mtd);
+}
+
+static void spi_nor_shutdown(struct spi_mem *spimem)
+{
+	struct spi_nor *nor = spi_mem_get_drvdata(spimem);
+
+	spi_nor_restore(nor);
+}
+
+/*
+ * Do NOT add to this array without reading the following:
+ *
+ * Historically, many flash devices are bound to this driver by their name. But
+ * since most of these flash are compatible to some extent, and their
+ * differences can often be differentiated by the JEDEC read-ID command, we
+ * encourage new users to add support to the spi-nor library, and simply bind
+ * against a generic string here (e.g., "jedec,spi-nor").
+ *
+ * Many flash names are kept here in this list (as well as in spi-nor.c) to
+ * keep them available as module aliases for existing platforms.
+ */
+static const struct spi_device_id spi_nor_dev_ids[] = {
+	/*
+	 * Allow non-DT platform devices to bind to the "spi-nor" modalias, and
+	 * hack around the fact that the SPI core does not provide uevent
+	 * matching for .of_match_table
+	 */
+	{"spi-nor"},
+
+	/*
+	 * Entries not used in DTs that should be safe to drop after replacing
+	 * them with "spi-nor" in platform data.
+	 */
+	{"s25sl064a"},	{"w25x16"},	{"m25p10"},	{"m25px64"},
+
+	/*
+	 * Entries that were used in DTs without "jedec,spi-nor" fallback and
+	 * should be kept for backward compatibility.
+	 */
+	{"at25df321a"},	{"at25df641"},	{"at26df081a"},
+	{"mx25l4005a"},	{"mx25l1606e"},	{"mx25l6405d"},	{"mx25l12805d"},
+	{"mx25l25635e"},{"mx66l51235l"},
+	{"n25q064"},	{"n25q128a11"},	{"n25q128a13"},	{"n25q512a"},
+	{"s25fl256s1"},	{"s25fl512s"},	{"s25sl12801"},	{"s25fl008k"},
+	{"s25fl064k"},
+	{"sst25vf040b"},{"sst25vf016b"},{"sst25vf032b"},{"sst25wf040"},
+	{"m25p40"},	{"m25p80"},	{"m25p16"},	{"m25p32"},
+	{"m25p64"},	{"m25p128"},
+	{"w25x80"},	{"w25x32"},	{"w25q32"},	{"w25q32dw"},
+	{"w25q80bl"},	{"w25q128"},	{"w25q256"},
+
+	/* Flashes that can't be detected using JEDEC */
+	{"m25p05-nonjedec"},	{"m25p10-nonjedec"},	{"m25p20-nonjedec"},
+	{"m25p40-nonjedec"},	{"m25p80-nonjedec"},	{"m25p16-nonjedec"},
+	{"m25p32-nonjedec"},	{"m25p64-nonjedec"},	{"m25p128-nonjedec"},
+
+	/* Everspin MRAMs (non-JEDEC) */
+	{ "mr25h128" }, /* 128 Kib, 40 MHz */
+	{ "mr25h256" }, /* 256 Kib, 40 MHz */
+	{ "mr25h10" },  /*   1 Mib, 40 MHz */
+	{ "mr25h40" },  /*   4 Mib, 40 MHz */
+
+	{ },
+};
+MODULE_DEVICE_TABLE(spi, spi_nor_dev_ids);
+
+static const struct of_device_id spi_nor_of_table[] = {
+	/*
+	 * Generic compatibility for SPI NOR that can be identified by the
+	 * JEDEC READ ID opcode (0x9F). Use this, if possible.
+	 */
+	{ .compatible = "jedec,spi-nor" },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, spi_nor_of_table);
+
+/*
+ * REVISIT: many of these chips have deep power-down modes, which
+ * should clearly be entered on suspend() to minimize power use.
+ * And also when they're otherwise idle...
+ */
+static struct spi_mem_driver spi_nor_driver = {
+	.spidrv = {
+		.driver = {
+			.name = "spi-nor",
+			.of_match_table = spi_nor_of_table,
+		},
+		.id_table = spi_nor_dev_ids,
+	},
+	.probe = spi_nor_probe,
+	.remove = spi_nor_remove,
+	.shutdown = spi_nor_shutdown,
+};
+module_spi_mem_driver(spi_nor_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Huang Shijie <shijie8@gmail.com>");
+MODULE_AUTHOR("Mike Lavender");
+MODULE_DESCRIPTION("framework for SPI NOR");
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
new file mode 100644
index 0000000..6f2f6b2
--- /dev/null
+++ b/drivers/mtd/spi-nor/core.h
@@ -0,0 +1,441 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#ifndef __LINUX_MTD_SPI_NOR_INTERNAL_H
+#define __LINUX_MTD_SPI_NOR_INTERNAL_H
+
+#include "sfdp.h"
+
+#define SPI_NOR_MAX_ID_LEN	6
+
+enum spi_nor_option_flags {
+	SNOR_F_USE_FSR		= BIT(0),
+	SNOR_F_HAS_SR_TB	= BIT(1),
+	SNOR_F_NO_OP_CHIP_ERASE	= BIT(2),
+	SNOR_F_READY_XSR_RDY	= BIT(3),
+	SNOR_F_USE_CLSR		= BIT(4),
+	SNOR_F_BROKEN_RESET	= BIT(5),
+	SNOR_F_4B_OPCODES	= BIT(6),
+	SNOR_F_HAS_4BAIT	= BIT(7),
+	SNOR_F_HAS_LOCK		= BIT(8),
+	SNOR_F_HAS_16BIT_SR	= BIT(9),
+	SNOR_F_NO_READ_CR	= BIT(10),
+	SNOR_F_HAS_SR_TB_BIT6	= BIT(11),
+	SNOR_F_HAS_4BIT_BP      = BIT(12),
+	SNOR_F_HAS_SR_BP3_BIT6  = BIT(13),
+};
+
+struct spi_nor_read_command {
+	u8			num_mode_clocks;
+	u8			num_wait_states;
+	u8			opcode;
+	enum spi_nor_protocol	proto;
+};
+
+struct spi_nor_pp_command {
+	u8			opcode;
+	enum spi_nor_protocol	proto;
+};
+
+enum spi_nor_read_command_index {
+	SNOR_CMD_READ,
+	SNOR_CMD_READ_FAST,
+	SNOR_CMD_READ_1_1_1_DTR,
+
+	/* Dual SPI */
+	SNOR_CMD_READ_1_1_2,
+	SNOR_CMD_READ_1_2_2,
+	SNOR_CMD_READ_2_2_2,
+	SNOR_CMD_READ_1_2_2_DTR,
+
+	/* Quad SPI */
+	SNOR_CMD_READ_1_1_4,
+	SNOR_CMD_READ_1_4_4,
+	SNOR_CMD_READ_4_4_4,
+	SNOR_CMD_READ_1_4_4_DTR,
+
+	/* Octal SPI */
+	SNOR_CMD_READ_1_1_8,
+	SNOR_CMD_READ_1_8_8,
+	SNOR_CMD_READ_8_8_8,
+	SNOR_CMD_READ_1_8_8_DTR,
+
+	SNOR_CMD_READ_MAX
+};
+
+enum spi_nor_pp_command_index {
+	SNOR_CMD_PP,
+
+	/* Quad SPI */
+	SNOR_CMD_PP_1_1_4,
+	SNOR_CMD_PP_1_4_4,
+	SNOR_CMD_PP_4_4_4,
+
+	/* Octal SPI */
+	SNOR_CMD_PP_1_1_8,
+	SNOR_CMD_PP_1_8_8,
+	SNOR_CMD_PP_8_8_8,
+
+	SNOR_CMD_PP_MAX
+};
+
+/**
+ * struct spi_nor_erase_type - Structure to describe a SPI NOR erase type
+ * @size:		the size of the sector/block erased by the erase type.
+ *			JEDEC JESD216B imposes erase sizes to be a power of 2.
+ * @size_shift:		@size is a power of 2, the shift is stored in
+ *			@size_shift.
+ * @size_mask:		the size mask based on @size_shift.
+ * @opcode:		the SPI command op code to erase the sector/block.
+ * @idx:		Erase Type index as sorted in the Basic Flash Parameter
+ *			Table. It will be used to synchronize the supported
+ *			Erase Types with the ones identified in the SFDP
+ *			optional tables.
+ */
+struct spi_nor_erase_type {
+	u32	size;
+	u32	size_shift;
+	u32	size_mask;
+	u8	opcode;
+	u8	idx;
+};
+
+/**
+ * struct spi_nor_erase_command - Used for non-uniform erases
+ * The structure is used to describe a list of erase commands to be executed
+ * once we validate that the erase can be performed. The elements in the list
+ * are run-length encoded.
+ * @list:		for inclusion into the list of erase commands.
+ * @count:		how many times the same erase command should be
+ *			consecutively used.
+ * @size:		the size of the sector/block erased by the command.
+ * @opcode:		the SPI command op code to erase the sector/block.
+ */
+struct spi_nor_erase_command {
+	struct list_head	list;
+	u32			count;
+	u32			size;
+	u8			opcode;
+};
+
+/**
+ * struct spi_nor_erase_region - Structure to describe a SPI NOR erase region
+ * @offset:		the offset in the data array of erase region start.
+ *			LSB bits are used as a bitmask encoding flags to
+ *			determine if this region is overlaid, if this region is
+ *			the last in the SPI NOR flash memory and to indicate
+ *			all the supported erase commands inside this region.
+ *			The erase types are sorted in ascending order with the
+ *			smallest Erase Type size being at BIT(0).
+ * @size:		the size of the region in bytes.
+ */
+struct spi_nor_erase_region {
+	u64		offset;
+	u64		size;
+};
+
+#define SNOR_ERASE_TYPE_MAX	4
+#define SNOR_ERASE_TYPE_MASK	GENMASK_ULL(SNOR_ERASE_TYPE_MAX - 1, 0)
+
+#define SNOR_LAST_REGION	BIT(4)
+#define SNOR_OVERLAID_REGION	BIT(5)
+
+#define SNOR_ERASE_FLAGS_MAX	6
+#define SNOR_ERASE_FLAGS_MASK	GENMASK_ULL(SNOR_ERASE_FLAGS_MAX - 1, 0)
+
+/**
+ * struct spi_nor_erase_map - Structure to describe the SPI NOR erase map
+ * @regions:		array of erase regions. The regions are consecutive in
+ *			address space. Walking through the regions is done
+ *			incrementally.
+ * @uniform_region:	a pre-allocated erase region for SPI NOR with a uniform
+ *			sector size (legacy implementation).
+ * @erase_type:		an array of erase types shared by all the regions.
+ *			The erase types are sorted in ascending order, with the
+ *			smallest Erase Type size being the first member in the
+ *			erase_type array.
+ * @uniform_erase_type:	bitmask encoding erase types that can erase the
+ *			entire memory. This member is completed at init by
+ *			uniform and non-uniform SPI NOR flash memories if they
+ *			support at least one erase type that can erase the
+ *			entire memory.
+ */
+struct spi_nor_erase_map {
+	struct spi_nor_erase_region	*regions;
+	struct spi_nor_erase_region	uniform_region;
+	struct spi_nor_erase_type	erase_type[SNOR_ERASE_TYPE_MAX];
+	u8				uniform_erase_type;
+};
+
+/**
+ * struct spi_nor_locking_ops - SPI NOR locking methods
+ * @lock:	lock a region of the SPI NOR.
+ * @unlock:	unlock a region of the SPI NOR.
+ * @is_locked:	check if a region of the SPI NOR is completely locked
+ */
+struct spi_nor_locking_ops {
+	int (*lock)(struct spi_nor *nor, loff_t ofs, uint64_t len);
+	int (*unlock)(struct spi_nor *nor, loff_t ofs, uint64_t len);
+	int (*is_locked)(struct spi_nor *nor, loff_t ofs, uint64_t len);
+};
+
+/**
+ * struct spi_nor_flash_parameter - SPI NOR flash parameters and settings.
+ * Includes legacy flash parameters and settings that can be overwritten
+ * by the spi_nor_fixups hooks, or dynamically when parsing the JESD216
+ * Serial Flash Discoverable Parameters (SFDP) tables.
+ *
+ * @size:		the flash memory density in bytes.
+ * @page_size:		the page size of the SPI NOR flash memory.
+ * @hwcaps:		describes the read and page program hardware
+ *			capabilities.
+ * @reads:		read capabilities ordered by priority: the higher index
+ *                      in the array, the higher priority.
+ * @page_programs:	page program capabilities ordered by priority: the
+ *                      higher index in the array, the higher priority.
+ * @erase_map:		the erase map parsed from the SFDP Sector Map Parameter
+ *                      Table.
+ * @quad_enable:	enables SPI NOR quad mode.
+ * @set_4byte_addr_mode: puts the SPI NOR in 4 byte addressing mode.
+ * @convert_addr:	converts an absolute address into something the flash
+ *                      will understand. Particularly useful when pagesize is
+ *                      not a power-of-2.
+ * @setup:              configures the SPI NOR memory. Useful for SPI NOR
+ *                      flashes that have peculiarities to the SPI NOR standard
+ *                      e.g. different opcodes, specific address calculation,
+ *                      page size, etc.
+ * @locking_ops:	SPI NOR locking methods.
+ */
+struct spi_nor_flash_parameter {
+	u64				size;
+	u32				page_size;
+
+	struct spi_nor_hwcaps		hwcaps;
+	struct spi_nor_read_command	reads[SNOR_CMD_READ_MAX];
+	struct spi_nor_pp_command	page_programs[SNOR_CMD_PP_MAX];
+
+	struct spi_nor_erase_map        erase_map;
+
+	int (*quad_enable)(struct spi_nor *nor);
+	int (*set_4byte_addr_mode)(struct spi_nor *nor, bool enable);
+	u32 (*convert_addr)(struct spi_nor *nor, u32 addr);
+	int (*setup)(struct spi_nor *nor, const struct spi_nor_hwcaps *hwcaps);
+
+	const struct spi_nor_locking_ops *locking_ops;
+};
+
+/**
+ * struct spi_nor_fixups - SPI NOR fixup hooks
+ * @default_init: called after default flash parameters init. Used to tweak
+ *                flash parameters when information provided by the flash_info
+ *                table is incomplete or wrong.
+ * @post_bfpt: called after the BFPT table has been parsed
+ * @post_sfdp: called after SFDP has been parsed (is also called for SPI NORs
+ *             that do not support RDSFDP). Typically used to tweak various
+ *             parameters that could not be extracted by other means (i.e.
+ *             when information provided by the SFDP/flash_info tables are
+ *             incomplete or wrong).
+ *
+ * Those hooks can be used to tweak the SPI NOR configuration when the SFDP
+ * table is broken or not available.
+ */
+struct spi_nor_fixups {
+	void (*default_init)(struct spi_nor *nor);
+	int (*post_bfpt)(struct spi_nor *nor,
+			 const struct sfdp_parameter_header *bfpt_header,
+			 const struct sfdp_bfpt *bfpt,
+			 struct spi_nor_flash_parameter *params);
+	void (*post_sfdp)(struct spi_nor *nor);
+};
+
+struct flash_info {
+	char		*name;
+
+	/*
+	 * This array stores the ID bytes.
+	 * The first three bytes are the JEDIC ID.
+	 * JEDEC ID zero means "no ID" (mostly older chips).
+	 */
+	u8		id[SPI_NOR_MAX_ID_LEN];
+	u8		id_len;
+
+	/* The size listed here is what works with SPINOR_OP_SE, which isn't
+	 * necessarily called a "sector" by the vendor.
+	 */
+	unsigned	sector_size;
+	u16		n_sectors;
+
+	u16		page_size;
+	u16		addr_width;
+
+	u32		flags;
+#define SECT_4K			BIT(0)	/* SPINOR_OP_BE_4K works uniformly */
+#define SPI_NOR_NO_ERASE	BIT(1)	/* No erase command needed */
+#define SST_WRITE		BIT(2)	/* use SST byte programming */
+#define SPI_NOR_NO_FR		BIT(3)	/* Can't do fastread */
+#define SECT_4K_PMC		BIT(4)	/* SPINOR_OP_BE_4K_PMC works uniformly */
+#define SPI_NOR_DUAL_READ	BIT(5)	/* Flash supports Dual Read */
+#define SPI_NOR_QUAD_READ	BIT(6)	/* Flash supports Quad Read */
+#define USE_FSR			BIT(7)	/* use flag status register */
+#define SPI_NOR_HAS_LOCK	BIT(8)	/* Flash supports lock/unlock via SR */
+#define SPI_NOR_HAS_TB		BIT(9)	/*
+					 * Flash SR has Top/Bottom (TB) protect
+					 * bit. Must be used with
+					 * SPI_NOR_HAS_LOCK.
+					 */
+#define SPI_NOR_XSR_RDY		BIT(10)	/*
+					 * S3AN flashes have specific opcode to
+					 * read the status register.
+					 */
+#define SPI_NOR_4B_OPCODES	BIT(11)	/*
+					 * Use dedicated 4byte address op codes
+					 * to support memory size above 128Mib.
+					 */
+#define NO_CHIP_ERASE		BIT(12) /* Chip does not support chip erase */
+#define SPI_NOR_SKIP_SFDP	BIT(13)	/* Skip parsing of SFDP tables */
+#define USE_CLSR		BIT(14)	/* use CLSR command */
+#define SPI_NOR_OCTAL_READ	BIT(15)	/* Flash supports Octal Read */
+#define SPI_NOR_TB_SR_BIT6	BIT(16)	/*
+					 * Top/Bottom (TB) is bit 6 of
+					 * status register. Must be used with
+					 * SPI_NOR_HAS_TB.
+					 */
+#define SPI_NOR_4BIT_BP		BIT(17) /*
+					 * Flash SR has 4 bit fields (BP0-3)
+					 * for block protection.
+					 */
+#define SPI_NOR_BP3_SR_BIT6	BIT(18) /*
+					 * BP3 is bit 6 of status register.
+					 * Must be used with SPI_NOR_4BIT_BP.
+					 */
+
+	/* Part specific fixup hooks. */
+	const struct spi_nor_fixups *fixups;
+};
+
+/* Used when the "_ext_id" is two bytes at most */
+#define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags)	\
+		.id = {							\
+			((_jedec_id) >> 16) & 0xff,			\
+			((_jedec_id) >> 8) & 0xff,			\
+			(_jedec_id) & 0xff,				\
+			((_ext_id) >> 8) & 0xff,			\
+			(_ext_id) & 0xff,				\
+			},						\
+		.id_len = (!(_jedec_id) ? 0 : (3 + ((_ext_id) ? 2 : 0))),	\
+		.sector_size = (_sector_size),				\
+		.n_sectors = (_n_sectors),				\
+		.page_size = 256,					\
+		.flags = (_flags),
+
+#define INFO6(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags)	\
+		.id = {							\
+			((_jedec_id) >> 16) & 0xff,			\
+			((_jedec_id) >> 8) & 0xff,			\
+			(_jedec_id) & 0xff,				\
+			((_ext_id) >> 16) & 0xff,			\
+			((_ext_id) >> 8) & 0xff,			\
+			(_ext_id) & 0xff,				\
+			},						\
+		.id_len = 6,						\
+		.sector_size = (_sector_size),				\
+		.n_sectors = (_n_sectors),				\
+		.page_size = 256,					\
+		.flags = (_flags),
+
+#define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_width, _flags)	\
+		.sector_size = (_sector_size),				\
+		.n_sectors = (_n_sectors),				\
+		.page_size = (_page_size),				\
+		.addr_width = (_addr_width),				\
+		.flags = (_flags),
+
+#define S3AN_INFO(_jedec_id, _n_sectors, _page_size)			\
+		.id = {							\
+			((_jedec_id) >> 16) & 0xff,			\
+			((_jedec_id) >> 8) & 0xff,			\
+			(_jedec_id) & 0xff				\
+			},						\
+		.id_len = 3,						\
+		.sector_size = (8*_page_size),				\
+		.n_sectors = (_n_sectors),				\
+		.page_size = _page_size,				\
+		.addr_width = 3,					\
+		.flags = SPI_NOR_NO_FR | SPI_NOR_XSR_RDY,
+
+/**
+ * struct spi_nor_manufacturer - SPI NOR manufacturer object
+ * @name: manufacturer name
+ * @parts: array of parts supported by this manufacturer
+ * @nparts: number of entries in the parts array
+ * @fixups: hooks called at various points in time during spi_nor_scan()
+ */
+struct spi_nor_manufacturer {
+	const char *name;
+	const struct flash_info *parts;
+	unsigned int nparts;
+	const struct spi_nor_fixups *fixups;
+};
+
+/* Manufacturer drivers. */
+extern const struct spi_nor_manufacturer spi_nor_atmel;
+extern const struct spi_nor_manufacturer spi_nor_catalyst;
+extern const struct spi_nor_manufacturer spi_nor_eon;
+extern const struct spi_nor_manufacturer spi_nor_esmt;
+extern const struct spi_nor_manufacturer spi_nor_everspin;
+extern const struct spi_nor_manufacturer spi_nor_fujitsu;
+extern const struct spi_nor_manufacturer spi_nor_gigadevice;
+extern const struct spi_nor_manufacturer spi_nor_intel;
+extern const struct spi_nor_manufacturer spi_nor_issi;
+extern const struct spi_nor_manufacturer spi_nor_macronix;
+extern const struct spi_nor_manufacturer spi_nor_micron;
+extern const struct spi_nor_manufacturer spi_nor_st;
+extern const struct spi_nor_manufacturer spi_nor_spansion;
+extern const struct spi_nor_manufacturer spi_nor_sst;
+extern const struct spi_nor_manufacturer spi_nor_winbond;
+extern const struct spi_nor_manufacturer spi_nor_xilinx;
+extern const struct spi_nor_manufacturer spi_nor_xmc;
+
+int spi_nor_write_enable(struct spi_nor *nor);
+int spi_nor_write_disable(struct spi_nor *nor);
+int spi_nor_set_4byte_addr_mode(struct spi_nor *nor, bool enable);
+int spi_nor_write_ear(struct spi_nor *nor, u8 ear);
+int spi_nor_wait_till_ready(struct spi_nor *nor);
+int spi_nor_lock_and_prep(struct spi_nor *nor);
+void spi_nor_unlock_and_unprep(struct spi_nor *nor);
+int spi_nor_sr1_bit6_quad_enable(struct spi_nor *nor);
+int spi_nor_sr2_bit1_quad_enable(struct spi_nor *nor);
+int spi_nor_sr2_bit7_quad_enable(struct spi_nor *nor);
+
+int spi_nor_xread_sr(struct spi_nor *nor, u8 *sr);
+ssize_t spi_nor_read_data(struct spi_nor *nor, loff_t from, size_t len,
+			  u8 *buf);
+ssize_t spi_nor_write_data(struct spi_nor *nor, loff_t to, size_t len,
+			   const u8 *buf);
+
+int spi_nor_hwcaps_read2cmd(u32 hwcaps);
+u8 spi_nor_convert_3to4_read(u8 opcode);
+void spi_nor_set_pp_settings(struct spi_nor_pp_command *pp, u8 opcode,
+			     enum spi_nor_protocol proto);
+
+void spi_nor_set_erase_type(struct spi_nor_erase_type *erase, u32 size,
+			    u8 opcode);
+struct spi_nor_erase_region *
+spi_nor_region_next(struct spi_nor_erase_region *region);
+void spi_nor_init_uniform_erase_map(struct spi_nor_erase_map *map,
+				    u8 erase_mask, u64 flash_size);
+
+int spi_nor_post_bfpt_fixups(struct spi_nor *nor,
+			     const struct sfdp_parameter_header *bfpt_header,
+			     const struct sfdp_bfpt *bfpt,
+			     struct spi_nor_flash_parameter *params);
+
+static struct spi_nor __maybe_unused *mtd_to_spi_nor(struct mtd_info *mtd)
+{
+	return mtd->priv;
+}
+
+#endif /* __LINUX_MTD_SPI_NOR_INTERNAL_H */
diff --git a/drivers/mtd/spi-nor/eon.c b/drivers/mtd/spi-nor/eon.c
new file mode 100644
index 0000000..ddb8e36
--- /dev/null
+++ b/drivers/mtd/spi-nor/eon.c
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static const struct flash_info eon_parts[] = {
+	/* EON -- en25xxx */
+	{ "en25f32",    INFO(0x1c3116, 0, 64 * 1024,   64, SECT_4K) },
+	{ "en25p32",    INFO(0x1c2016, 0, 64 * 1024,   64, 0) },
+	{ "en25q32b",   INFO(0x1c3016, 0, 64 * 1024,   64, 0) },
+	{ "en25p64",    INFO(0x1c2017, 0, 64 * 1024,  128, 0) },
+	{ "en25q64",    INFO(0x1c3017, 0, 64 * 1024,  128, SECT_4K) },
+	{ "en25q80a",   INFO(0x1c3014, 0, 64 * 1024,   16,
+			     SECT_4K | SPI_NOR_DUAL_READ) },
+	{ "en25qh16",   INFO(0x1c7015, 0, 64 * 1024,   32,
+			     SECT_4K | SPI_NOR_DUAL_READ) },
+	{ "en25qh32",   INFO(0x1c7016, 0, 64 * 1024,   64, 0) },
+	{ "en25qh64",   INFO(0x1c7017, 0, 64 * 1024,  128,
+			     SECT_4K | SPI_NOR_DUAL_READ) },
+	{ "en25qh128",  INFO(0x1c7018, 0, 64 * 1024,  256, 0) },
+	{ "en25qh256",  INFO(0x1c7019, 0, 64 * 1024,  512, 0) },
+	{ "en25s64",	INFO(0x1c3817, 0, 64 * 1024,  128, SECT_4K) },
+};
+
+const struct spi_nor_manufacturer spi_nor_eon = {
+	.name = "eon",
+	.parts = eon_parts,
+	.nparts = ARRAY_SIZE(eon_parts),
+};
diff --git a/drivers/mtd/spi-nor/esmt.c b/drivers/mtd/spi-nor/esmt.c
new file mode 100644
index 0000000..c931700
--- /dev/null
+++ b/drivers/mtd/spi-nor/esmt.c
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static const struct flash_info esmt_parts[] = {
+	/* ESMT */
+	{ "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64,
+			   SECT_4K | SPI_NOR_HAS_LOCK) },
+	{ "f25l32qa", INFO(0x8c4116, 0, 64 * 1024, 64,
+			   SECT_4K | SPI_NOR_HAS_LOCK) },
+	{ "f25l64qa", INFO(0x8c4117, 0, 64 * 1024, 128,
+			   SECT_4K | SPI_NOR_HAS_LOCK) },
+};
+
+const struct spi_nor_manufacturer spi_nor_esmt = {
+	.name = "esmt",
+	.parts = esmt_parts,
+	.nparts = ARRAY_SIZE(esmt_parts),
+};
diff --git a/drivers/mtd/spi-nor/everspin.c b/drivers/mtd/spi-nor/everspin.c
new file mode 100644
index 0000000..04a177a
--- /dev/null
+++ b/drivers/mtd/spi-nor/everspin.c
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static const struct flash_info everspin_parts[] = {
+	/* Everspin */
+	{ "mr25h128", CAT25_INFO(16 * 1024, 1, 256, 2,
+				 SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
+	{ "mr25h256", CAT25_INFO(32 * 1024, 1, 256, 2,
+				 SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
+	{ "mr25h10",  CAT25_INFO(128 * 1024, 1, 256, 3,
+				 SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
+	{ "mr25h40",  CAT25_INFO(512 * 1024, 1, 256, 3,
+				 SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
+};
+
+const struct spi_nor_manufacturer spi_nor_everspin = {
+	.name = "everspin",
+	.parts = everspin_parts,
+	.nparts = ARRAY_SIZE(everspin_parts),
+};
diff --git a/drivers/mtd/spi-nor/fujitsu.c b/drivers/mtd/spi-nor/fujitsu.c
new file mode 100644
index 0000000..e385d93
--- /dev/null
+++ b/drivers/mtd/spi-nor/fujitsu.c
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static const struct flash_info fujitsu_parts[] = {
+	/* Fujitsu */
+	{ "mb85rs1mt", INFO(0x047f27, 0, 128 * 1024, 1, SPI_NOR_NO_ERASE) },
+};
+
+const struct spi_nor_manufacturer spi_nor_fujitsu = {
+	.name = "fujitsu",
+	.parts = fujitsu_parts,
+	.nparts = ARRAY_SIZE(fujitsu_parts),
+};
diff --git a/drivers/mtd/spi-nor/gigadevice.c b/drivers/mtd/spi-nor/gigadevice.c
new file mode 100644
index 0000000..447d84b
--- /dev/null
+++ b/drivers/mtd/spi-nor/gigadevice.c
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static void gd25q256_default_init(struct spi_nor *nor)
+{
+	/*
+	 * Some manufacturer like GigaDevice may use different
+	 * bit to set QE on different memories, so the MFR can't
+	 * indicate the quad_enable method for this case, we need
+	 * to set it in the default_init fixup hook.
+	 */
+	nor->params->quad_enable = spi_nor_sr1_bit6_quad_enable;
+}
+
+static struct spi_nor_fixups gd25q256_fixups = {
+	.default_init = gd25q256_default_init,
+};
+
+static const struct flash_info gigadevice_parts[] = {
+	{ "gd25q16", INFO(0xc84015, 0, 64 * 1024,  32,
+			  SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+			  SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
+	{ "gd25q32", INFO(0xc84016, 0, 64 * 1024,  64,
+			  SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+			  SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
+	{ "gd25lq32", INFO(0xc86016, 0, 64 * 1024, 64,
+			   SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+			   SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
+	{ "gd25q64", INFO(0xc84017, 0, 64 * 1024, 128,
+			  SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+			  SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
+	{ "gd25lq64c", INFO(0xc86017, 0, 64 * 1024, 128,
+			    SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+			    SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
+	{ "gd25lq128d", INFO(0xc86018, 0, 64 * 1024, 256,
+			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+			     SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
+	{ "gd25q128", INFO(0xc84018, 0, 64 * 1024, 256,
+			   SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+			   SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
+	{ "gd25q256", INFO(0xc84019, 0, 64 * 1024, 512,
+			   SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+			   SPI_NOR_4B_OPCODES | SPI_NOR_HAS_LOCK |
+			   SPI_NOR_HAS_TB | SPI_NOR_TB_SR_BIT6)
+		.fixups = &gd25q256_fixups },
+};
+
+const struct spi_nor_manufacturer spi_nor_gigadevice = {
+	.name = "gigadevice",
+	.parts = gigadevice_parts,
+	.nparts = ARRAY_SIZE(gigadevice_parts),
+};
diff --git a/drivers/mtd/spi-nor/intel.c b/drivers/mtd/spi-nor/intel.c
new file mode 100644
index 0000000..d8196f1
--- /dev/null
+++ b/drivers/mtd/spi-nor/intel.c
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static const struct flash_info intel_parts[] = {
+	/* Intel/Numonyx -- xxxs33b */
+	{ "160s33b",  INFO(0x898911, 0, 64 * 1024,  32, 0) },
+	{ "320s33b",  INFO(0x898912, 0, 64 * 1024,  64, 0) },
+	{ "640s33b",  INFO(0x898913, 0, 64 * 1024, 128, 0) },
+};
+
+static void intel_default_init(struct spi_nor *nor)
+{
+	nor->flags |= SNOR_F_HAS_LOCK;
+}
+
+static const struct spi_nor_fixups intel_fixups = {
+	.default_init = intel_default_init,
+};
+
+const struct spi_nor_manufacturer spi_nor_intel = {
+	.name = "intel",
+	.parts = intel_parts,
+	.nparts = ARRAY_SIZE(intel_parts),
+	.fixups = &intel_fixups,
+};
diff --git a/drivers/mtd/spi-nor/issi.c b/drivers/mtd/spi-nor/issi.c
new file mode 100644
index 0000000..ffcb60e
--- /dev/null
+++ b/drivers/mtd/spi-nor/issi.c
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static int
+is25lp256_post_bfpt_fixups(struct spi_nor *nor,
+			   const struct sfdp_parameter_header *bfpt_header,
+			   const struct sfdp_bfpt *bfpt,
+			   struct spi_nor_flash_parameter *params)
+{
+	/*
+	 * IS25LP256 supports 4B opcodes, but the BFPT advertises a
+	 * BFPT_DWORD1_ADDRESS_BYTES_3_ONLY address width.
+	 * Overwrite the address width advertised by the BFPT.
+	 */
+	if ((bfpt->dwords[BFPT_DWORD(1)] & BFPT_DWORD1_ADDRESS_BYTES_MASK) ==
+		BFPT_DWORD1_ADDRESS_BYTES_3_ONLY)
+		nor->addr_width = 4;
+
+	return 0;
+}
+
+static struct spi_nor_fixups is25lp256_fixups = {
+	.post_bfpt = is25lp256_post_bfpt_fixups,
+};
+
+static const struct flash_info issi_parts[] = {
+	/* ISSI */
+	{ "is25cd512",  INFO(0x7f9d20, 0, 32 * 1024,   2, SECT_4K) },
+	{ "is25lq040b", INFO(0x9d4013, 0, 64 * 1024,   8,
+			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "is25lp016d", INFO(0x9d6015, 0, 64 * 1024,  32,
+			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "is25lp080d", INFO(0x9d6014, 0, 64 * 1024,  16,
+			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "is25lp032",  INFO(0x9d6016, 0, 64 * 1024,  64,
+			     SECT_4K | SPI_NOR_DUAL_READ) },
+	{ "is25lp064",  INFO(0x9d6017, 0, 64 * 1024, 128,
+			     SECT_4K | SPI_NOR_DUAL_READ) },
+	{ "is25lp128",  INFO(0x9d6018, 0, 64 * 1024, 256,
+			     SECT_4K | SPI_NOR_DUAL_READ) },
+	{ "is25lp256",  INFO(0x9d6019, 0, 64 * 1024, 512,
+			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+			     SPI_NOR_4B_OPCODES)
+		.fixups = &is25lp256_fixups },
+	{ "is25wp032",  INFO(0x9d7016, 0, 64 * 1024,  64,
+			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "is25wp064",  INFO(0x9d7017, 0, 64 * 1024, 128,
+			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "is25wp128",  INFO(0x9d7018, 0, 64 * 1024, 256,
+			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "is25wp256", INFO(0x9d7019, 0, 64 * 1024, 512,
+			    SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+			    SPI_NOR_4B_OPCODES)
+		.fixups = &is25lp256_fixups },
+
+	/* PMC */
+	{ "pm25lv512",   INFO(0,        0, 32 * 1024,    2, SECT_4K_PMC) },
+	{ "pm25lv010",   INFO(0,        0, 32 * 1024,    4, SECT_4K_PMC) },
+	{ "pm25lq032",   INFO(0x7f9d46, 0, 64 * 1024,   64, SECT_4K) },
+};
+
+static void issi_default_init(struct spi_nor *nor)
+{
+	nor->params->quad_enable = spi_nor_sr1_bit6_quad_enable;
+}
+
+static const struct spi_nor_fixups issi_fixups = {
+	.default_init = issi_default_init,
+};
+
+const struct spi_nor_manufacturer spi_nor_issi = {
+	.name = "issi",
+	.parts = issi_parts,
+	.nparts = ARRAY_SIZE(issi_parts),
+	.fixups = &issi_fixups,
+};
diff --git a/drivers/mtd/spi-nor/macronix.c b/drivers/mtd/spi-nor/macronix.c
new file mode 100644
index 0000000..ab0f963
--- /dev/null
+++ b/drivers/mtd/spi-nor/macronix.c
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static int
+mx25l25635_post_bfpt_fixups(struct spi_nor *nor,
+			    const struct sfdp_parameter_header *bfpt_header,
+			    const struct sfdp_bfpt *bfpt,
+			    struct spi_nor_flash_parameter *params)
+{
+	/*
+	 * MX25L25635F supports 4B opcodes but MX25L25635E does not.
+	 * Unfortunately, Macronix has re-used the same JEDEC ID for both
+	 * variants which prevents us from defining a new entry in the parts
+	 * table.
+	 * We need a way to differentiate MX25L25635E and MX25L25635F, and it
+	 * seems that the F version advertises support for Fast Read 4-4-4 in
+	 * its BFPT table.
+	 */
+	if (bfpt->dwords[BFPT_DWORD(5)] & BFPT_DWORD5_FAST_READ_4_4_4)
+		nor->flags |= SNOR_F_4B_OPCODES;
+
+	return 0;
+}
+
+static struct spi_nor_fixups mx25l25635_fixups = {
+	.post_bfpt = mx25l25635_post_bfpt_fixups,
+};
+
+static const struct flash_info macronix_parts[] = {
+	/* Macronix */
+	{ "mx25l512e",   INFO(0xc22010, 0, 64 * 1024,   1, SECT_4K) },
+	{ "mx25l2005a",  INFO(0xc22012, 0, 64 * 1024,   4, SECT_4K) },
+	{ "mx25l4005a",  INFO(0xc22013, 0, 64 * 1024,   8, SECT_4K) },
+	{ "mx25l8005",   INFO(0xc22014, 0, 64 * 1024,  16, 0) },
+	{ "mx25l1606e",  INFO(0xc22015, 0, 64 * 1024,  32, SECT_4K) },
+	{ "mx25l3205d",  INFO(0xc22016, 0, 64 * 1024,  64, SECT_4K) },
+	{ "mx25l3255e",  INFO(0xc29e16, 0, 64 * 1024,  64, SECT_4K) },
+	{ "mx25l6405d",  INFO(0xc22017, 0, 64 * 1024, 128, SECT_4K) },
+	{ "mx25u2033e",  INFO(0xc22532, 0, 64 * 1024,   4, SECT_4K) },
+	{ "mx25u3235f",	 INFO(0xc22536, 0, 64 * 1024,  64,
+			      SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "mx25u4035",   INFO(0xc22533, 0, 64 * 1024,   8, SECT_4K) },
+	{ "mx25u8035",   INFO(0xc22534, 0, 64 * 1024,  16, SECT_4K) },
+	{ "mx25u6435f",  INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) },
+	{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
+	{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
+	{ "mx25r3235f",  INFO(0xc22816, 0, 64 * 1024,  64,
+			      SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "mx25u12835f", INFO(0xc22538, 0, 64 * 1024, 256,
+			      SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512,
+			      SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		.fixups = &mx25l25635_fixups },
+	{ "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512,
+			      SECT_4K | SPI_NOR_4B_OPCODES) },
+	{ "mx25v8035f",  INFO(0xc22314, 0, 64 * 1024,  16,
+			      SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
+	{ "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024,
+			      SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+			      SPI_NOR_4B_OPCODES) },
+	{ "mx66u51235f", INFO(0xc2253a, 0, 64 * 1024, 1024,
+			      SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
+	{ "mx66l1g45g",  INFO(0xc2201b, 0, 64 * 1024, 2048,
+			      SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "mx66l1g55g",  INFO(0xc2261b, 0, 64 * 1024, 2048,
+			      SPI_NOR_QUAD_READ) },
+};
+
+static void macronix_default_init(struct spi_nor *nor)
+{
+	nor->params->quad_enable = spi_nor_sr1_bit6_quad_enable;
+	nor->params->set_4byte_addr_mode = spi_nor_set_4byte_addr_mode;
+}
+
+static const struct spi_nor_fixups macronix_fixups = {
+	.default_init = macronix_default_init,
+};
+
+const struct spi_nor_manufacturer spi_nor_macronix = {
+	.name = "macronix",
+	.parts = macronix_parts,
+	.nparts = ARRAY_SIZE(macronix_parts),
+	.fixups = &macronix_fixups,
+};
diff --git a/drivers/mtd/spi-nor/micron-st.c b/drivers/mtd/spi-nor/micron-st.c
new file mode 100644
index 0000000..6c034b9
--- /dev/null
+++ b/drivers/mtd/spi-nor/micron-st.c
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static const struct flash_info micron_parts[] = {
+	{ "mt35xu512aba", INFO(0x2c5b1a, 0, 128 * 1024, 512,
+			       SECT_4K | USE_FSR | SPI_NOR_OCTAL_READ |
+			       SPI_NOR_4B_OPCODES) },
+	{ "mt35xu02g", INFO(0x2c5b1c, 0, 128 * 1024, 2048,
+			    SECT_4K | USE_FSR | SPI_NOR_OCTAL_READ |
+			    SPI_NOR_4B_OPCODES) },
+};
+
+static const struct flash_info st_parts[] = {
+	{ "n25q016a",	 INFO(0x20bb15, 0, 64 * 1024,   32,
+			      SECT_4K | SPI_NOR_QUAD_READ) },
+	{ "n25q032",	 INFO(0x20ba16, 0, 64 * 1024,   64,
+			      SPI_NOR_QUAD_READ) },
+	{ "n25q032a",	 INFO(0x20bb16, 0, 64 * 1024,   64,
+			      SPI_NOR_QUAD_READ) },
+	{ "n25q064",     INFO(0x20ba17, 0, 64 * 1024,  128,
+			      SECT_4K | SPI_NOR_QUAD_READ) },
+	{ "n25q064a",    INFO(0x20bb17, 0, 64 * 1024,  128,
+			      SECT_4K | SPI_NOR_QUAD_READ) },
+	{ "n25q128a11",  INFO(0x20bb18, 0, 64 * 1024,  256,
+			      SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
+	{ "n25q128a13",  INFO(0x20ba18, 0, 64 * 1024,  256,
+			      SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
+	{ "mt25ql256a",  INFO6(0x20ba19, 0x104400, 64 * 1024,  512,
+			       SECT_4K | USE_FSR | SPI_NOR_DUAL_READ |
+			       SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
+	{ "n25q256a",    INFO(0x20ba19, 0, 64 * 1024,  512, SECT_4K |
+			      USE_FSR | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "mt25qu256a",  INFO6(0x20bb19, 0x104400, 64 * 1024,  512,
+			       SECT_4K | USE_FSR | SPI_NOR_DUAL_READ |
+			       SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
+	{ "n25q256ax1",  INFO(0x20bb19, 0, 64 * 1024,  512,
+			      SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
+	{ "mt25ql512a",  INFO6(0x20ba20, 0x104400, 64 * 1024, 1024,
+			       SECT_4K | USE_FSR | SPI_NOR_DUAL_READ |
+			       SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
+	{ "n25q512ax3",  INFO(0x20ba20, 0, 64 * 1024, 1024,
+			      SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
+			      SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
+			      SPI_NOR_4BIT_BP | SPI_NOR_BP3_SR_BIT6) },
+	{ "mt25qu512a",  INFO6(0x20bb20, 0x104400, 64 * 1024, 1024,
+			       SECT_4K | USE_FSR | SPI_NOR_DUAL_READ |
+			       SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
+	{ "n25q512a",    INFO(0x20bb20, 0, 64 * 1024, 1024,
+			      SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
+			      SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
+			      SPI_NOR_4BIT_BP | SPI_NOR_BP3_SR_BIT6) },
+	{ "n25q00",      INFO(0x20ba21, 0, 64 * 1024, 2048,
+			      SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
+			      NO_CHIP_ERASE) },
+	{ "n25q00a",     INFO(0x20bb21, 0, 64 * 1024, 2048,
+			      SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
+			      NO_CHIP_ERASE) },
+	{ "mt25ql02g",   INFO(0x20ba22, 0, 64 * 1024, 4096,
+			      SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
+			      NO_CHIP_ERASE) },
+	{ "mt25qu02g",   INFO(0x20bb22, 0, 64 * 1024, 4096,
+			      SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
+			      NO_CHIP_ERASE) },
+
+	{ "m25p05",  INFO(0x202010,  0,  32 * 1024,   2, 0) },
+	{ "m25p10",  INFO(0x202011,  0,  32 * 1024,   4, 0) },
+	{ "m25p20",  INFO(0x202012,  0,  64 * 1024,   4, 0) },
+	{ "m25p40",  INFO(0x202013,  0,  64 * 1024,   8, 0) },
+	{ "m25p80",  INFO(0x202014,  0,  64 * 1024,  16, 0) },
+	{ "m25p16",  INFO(0x202015,  0,  64 * 1024,  32, 0) },
+	{ "m25p32",  INFO(0x202016,  0,  64 * 1024,  64, 0) },
+	{ "m25p64",  INFO(0x202017,  0,  64 * 1024, 128, 0) },
+	{ "m25p128", INFO(0x202018,  0, 256 * 1024,  64, 0) },
+
+	{ "m25p05-nonjedec",  INFO(0, 0,  32 * 1024,   2, 0) },
+	{ "m25p10-nonjedec",  INFO(0, 0,  32 * 1024,   4, 0) },
+	{ "m25p20-nonjedec",  INFO(0, 0,  64 * 1024,   4, 0) },
+	{ "m25p40-nonjedec",  INFO(0, 0,  64 * 1024,   8, 0) },
+	{ "m25p80-nonjedec",  INFO(0, 0,  64 * 1024,  16, 0) },
+	{ "m25p16-nonjedec",  INFO(0, 0,  64 * 1024,  32, 0) },
+	{ "m25p32-nonjedec",  INFO(0, 0,  64 * 1024,  64, 0) },
+	{ "m25p64-nonjedec",  INFO(0, 0,  64 * 1024, 128, 0) },
+	{ "m25p128-nonjedec", INFO(0, 0, 256 * 1024,  64, 0) },
+
+	{ "m45pe10", INFO(0x204011,  0, 64 * 1024,    2, 0) },
+	{ "m45pe80", INFO(0x204014,  0, 64 * 1024,   16, 0) },
+	{ "m45pe16", INFO(0x204015,  0, 64 * 1024,   32, 0) },
+
+	{ "m25pe20", INFO(0x208012,  0, 64 * 1024,  4,       0) },
+	{ "m25pe80", INFO(0x208014,  0, 64 * 1024, 16,       0) },
+	{ "m25pe16", INFO(0x208015,  0, 64 * 1024, 32, SECT_4K) },
+
+	{ "m25px16",    INFO(0x207115,  0, 64 * 1024, 32, SECT_4K) },
+	{ "m25px32",    INFO(0x207116,  0, 64 * 1024, 64, SECT_4K) },
+	{ "m25px32-s0", INFO(0x207316,  0, 64 * 1024, 64, SECT_4K) },
+	{ "m25px32-s1", INFO(0x206316,  0, 64 * 1024, 64, SECT_4K) },
+	{ "m25px64",    INFO(0x207117,  0, 64 * 1024, 128, 0) },
+	{ "m25px80",    INFO(0x207114,  0, 64 * 1024, 16, 0) },
+};
+
+/**
+ * st_micron_set_4byte_addr_mode() - Set 4-byte address mode for ST and Micron
+ * flashes.
+ * @nor:	pointer to 'struct spi_nor'.
+ * @enable:	true to enter the 4-byte address mode, false to exit the 4-byte
+ *		address mode.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int st_micron_set_4byte_addr_mode(struct spi_nor *nor, bool enable)
+{
+	int ret;
+
+	ret = spi_nor_write_enable(nor);
+	if (ret)
+		return ret;
+
+	ret = spi_nor_set_4byte_addr_mode(nor, enable);
+	if (ret)
+		return ret;
+
+	return spi_nor_write_disable(nor);
+}
+
+static void micron_st_default_init(struct spi_nor *nor)
+{
+	nor->flags |= SNOR_F_HAS_LOCK;
+	nor->flags &= ~SNOR_F_HAS_16BIT_SR;
+	nor->params->quad_enable = NULL;
+	nor->params->set_4byte_addr_mode = st_micron_set_4byte_addr_mode;
+}
+
+static const struct spi_nor_fixups micron_st_fixups = {
+	.default_init = micron_st_default_init,
+};
+
+const struct spi_nor_manufacturer spi_nor_micron = {
+	.name = "micron",
+	.parts = micron_parts,
+	.nparts = ARRAY_SIZE(micron_parts),
+	.fixups = &micron_st_fixups,
+};
+
+const struct spi_nor_manufacturer spi_nor_st = {
+	.name = "st",
+	.parts = st_parts,
+	.nparts = ARRAY_SIZE(st_parts),
+	.fixups = &micron_st_fixups,
+};
diff --git a/drivers/mtd/spi-nor/sfdp.c b/drivers/mtd/spi-nor/sfdp.c
new file mode 100644
index 0000000..f6038d3
--- /dev/null
+++ b/drivers/mtd/spi-nor/sfdp.c
@@ -0,0 +1,1204 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/slab.h>
+#include <linux/sort.h>
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+#define SFDP_PARAM_HEADER_ID(p)	(((p)->id_msb << 8) | (p)->id_lsb)
+#define SFDP_PARAM_HEADER_PTP(p) \
+	(((p)->parameter_table_pointer[2] << 16) | \
+	 ((p)->parameter_table_pointer[1] <<  8) | \
+	 ((p)->parameter_table_pointer[0] <<  0))
+
+#define SFDP_BFPT_ID		0xff00	/* Basic Flash Parameter Table */
+#define SFDP_SECTOR_MAP_ID	0xff81	/* Sector Map Table */
+#define SFDP_4BAIT_ID		0xff84  /* 4-byte Address Instruction Table */
+
+#define SFDP_SIGNATURE		0x50444653U
+#define SFDP_JESD216_MAJOR	1
+#define SFDP_JESD216_MINOR	0
+#define SFDP_JESD216A_MINOR	5
+#define SFDP_JESD216B_MINOR	6
+
+struct sfdp_header {
+	u32		signature; /* Ox50444653U <=> "SFDP" */
+	u8		minor;
+	u8		major;
+	u8		nph; /* 0-base number of parameter headers */
+	u8		unused;
+
+	/* Basic Flash Parameter Table. */
+	struct sfdp_parameter_header	bfpt_header;
+};
+
+/* Fast Read settings. */
+struct sfdp_bfpt_read {
+	/* The Fast Read x-y-z hardware capability in params->hwcaps.mask. */
+	u32			hwcaps;
+
+	/*
+	 * The <supported_bit> bit in <supported_dword> BFPT DWORD tells us
+	 * whether the Fast Read x-y-z command is supported.
+	 */
+	u32			supported_dword;
+	u32			supported_bit;
+
+	/*
+	 * The half-word at offset <setting_shift> in <setting_dword> BFPT DWORD
+	 * encodes the op code, the number of mode clocks and the number of wait
+	 * states to be used by Fast Read x-y-z command.
+	 */
+	u32			settings_dword;
+	u32			settings_shift;
+
+	/* The SPI protocol for this Fast Read x-y-z command. */
+	enum spi_nor_protocol	proto;
+};
+
+struct sfdp_bfpt_erase {
+	/*
+	 * The half-word at offset <shift> in DWORD <dwoard> encodes the
+	 * op code and erase sector size to be used by Sector Erase commands.
+	 */
+	u32			dword;
+	u32			shift;
+};
+
+#define SMPT_CMD_ADDRESS_LEN_MASK		GENMASK(23, 22)
+#define SMPT_CMD_ADDRESS_LEN_0			(0x0UL << 22)
+#define SMPT_CMD_ADDRESS_LEN_3			(0x1UL << 22)
+#define SMPT_CMD_ADDRESS_LEN_4			(0x2UL << 22)
+#define SMPT_CMD_ADDRESS_LEN_USE_CURRENT	(0x3UL << 22)
+
+#define SMPT_CMD_READ_DUMMY_MASK		GENMASK(19, 16)
+#define SMPT_CMD_READ_DUMMY_SHIFT		16
+#define SMPT_CMD_READ_DUMMY(_cmd) \
+	(((_cmd) & SMPT_CMD_READ_DUMMY_MASK) >> SMPT_CMD_READ_DUMMY_SHIFT)
+#define SMPT_CMD_READ_DUMMY_IS_VARIABLE		0xfUL
+
+#define SMPT_CMD_READ_DATA_MASK			GENMASK(31, 24)
+#define SMPT_CMD_READ_DATA_SHIFT		24
+#define SMPT_CMD_READ_DATA(_cmd) \
+	(((_cmd) & SMPT_CMD_READ_DATA_MASK) >> SMPT_CMD_READ_DATA_SHIFT)
+
+#define SMPT_CMD_OPCODE_MASK			GENMASK(15, 8)
+#define SMPT_CMD_OPCODE_SHIFT			8
+#define SMPT_CMD_OPCODE(_cmd) \
+	(((_cmd) & SMPT_CMD_OPCODE_MASK) >> SMPT_CMD_OPCODE_SHIFT)
+
+#define SMPT_MAP_REGION_COUNT_MASK		GENMASK(23, 16)
+#define SMPT_MAP_REGION_COUNT_SHIFT		16
+#define SMPT_MAP_REGION_COUNT(_header) \
+	((((_header) & SMPT_MAP_REGION_COUNT_MASK) >> \
+	  SMPT_MAP_REGION_COUNT_SHIFT) + 1)
+
+#define SMPT_MAP_ID_MASK			GENMASK(15, 8)
+#define SMPT_MAP_ID_SHIFT			8
+#define SMPT_MAP_ID(_header) \
+	(((_header) & SMPT_MAP_ID_MASK) >> SMPT_MAP_ID_SHIFT)
+
+#define SMPT_MAP_REGION_SIZE_MASK		GENMASK(31, 8)
+#define SMPT_MAP_REGION_SIZE_SHIFT		8
+#define SMPT_MAP_REGION_SIZE(_region) \
+	(((((_region) & SMPT_MAP_REGION_SIZE_MASK) >> \
+	   SMPT_MAP_REGION_SIZE_SHIFT) + 1) * 256)
+
+#define SMPT_MAP_REGION_ERASE_TYPE_MASK		GENMASK(3, 0)
+#define SMPT_MAP_REGION_ERASE_TYPE(_region) \
+	((_region) & SMPT_MAP_REGION_ERASE_TYPE_MASK)
+
+#define SMPT_DESC_TYPE_MAP			BIT(1)
+#define SMPT_DESC_END				BIT(0)
+
+#define SFDP_4BAIT_DWORD_MAX	2
+
+struct sfdp_4bait {
+	/* The hardware capability. */
+	u32		hwcaps;
+
+	/*
+	 * The <supported_bit> bit in DWORD1 of the 4BAIT tells us whether
+	 * the associated 4-byte address op code is supported.
+	 */
+	u32		supported_bit;
+};
+
+/**
+ * spi_nor_read_raw() - raw read of serial flash memory. read_opcode,
+ *			addr_width and read_dummy members of the struct spi_nor
+ *			should be previously
+ * set.
+ * @nor:	pointer to a 'struct spi_nor'
+ * @addr:	offset in the serial flash memory
+ * @len:	number of bytes to read
+ * @buf:	buffer where the data is copied into (dma-safe memory)
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_read_raw(struct spi_nor *nor, u32 addr, size_t len, u8 *buf)
+{
+	ssize_t ret;
+
+	while (len) {
+		ret = spi_nor_read_data(nor, addr, len, buf);
+		if (ret < 0)
+			return ret;
+		if (!ret || ret > len)
+			return -EIO;
+
+		buf += ret;
+		addr += ret;
+		len -= ret;
+	}
+	return 0;
+}
+
+/**
+ * spi_nor_read_sfdp() - read Serial Flash Discoverable Parameters.
+ * @nor:	pointer to a 'struct spi_nor'
+ * @addr:	offset in the SFDP area to start reading data from
+ * @len:	number of bytes to read
+ * @buf:	buffer where the SFDP data are copied into (dma-safe memory)
+ *
+ * Whatever the actual numbers of bytes for address and dummy cycles are
+ * for (Fast) Read commands, the Read SFDP (5Ah) instruction is always
+ * followed by a 3-byte address and 8 dummy clock cycles.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_read_sfdp(struct spi_nor *nor, u32 addr,
+			     size_t len, void *buf)
+{
+	u8 addr_width, read_opcode, read_dummy;
+	int ret;
+
+	read_opcode = nor->read_opcode;
+	addr_width = nor->addr_width;
+	read_dummy = nor->read_dummy;
+
+	nor->read_opcode = SPINOR_OP_RDSFDP;
+	nor->addr_width = 3;
+	nor->read_dummy = 8;
+
+	ret = spi_nor_read_raw(nor, addr, len, buf);
+
+	nor->read_opcode = read_opcode;
+	nor->addr_width = addr_width;
+	nor->read_dummy = read_dummy;
+
+	return ret;
+}
+
+/**
+ * spi_nor_read_sfdp_dma_unsafe() - read Serial Flash Discoverable Parameters.
+ * @nor:	pointer to a 'struct spi_nor'
+ * @addr:	offset in the SFDP area to start reading data from
+ * @len:	number of bytes to read
+ * @buf:	buffer where the SFDP data are copied into
+ *
+ * Wrap spi_nor_read_sfdp() using a kmalloc'ed bounce buffer as @buf is now not
+ * guaranteed to be dma-safe.
+ *
+ * Return: -ENOMEM if kmalloc() fails, the return code of spi_nor_read_sfdp()
+ *          otherwise.
+ */
+static int spi_nor_read_sfdp_dma_unsafe(struct spi_nor *nor, u32 addr,
+					size_t len, void *buf)
+{
+	void *dma_safe_buf;
+	int ret;
+
+	dma_safe_buf = kmalloc(len, GFP_KERNEL);
+	if (!dma_safe_buf)
+		return -ENOMEM;
+
+	ret = spi_nor_read_sfdp(nor, addr, len, dma_safe_buf);
+	memcpy(buf, dma_safe_buf, len);
+	kfree(dma_safe_buf);
+
+	return ret;
+}
+
+static void
+spi_nor_set_read_settings_from_bfpt(struct spi_nor_read_command *read,
+				    u16 half,
+				    enum spi_nor_protocol proto)
+{
+	read->num_mode_clocks = (half >> 5) & 0x07;
+	read->num_wait_states = (half >> 0) & 0x1f;
+	read->opcode = (half >> 8) & 0xff;
+	read->proto = proto;
+}
+
+static const struct sfdp_bfpt_read sfdp_bfpt_reads[] = {
+	/* Fast Read 1-1-2 */
+	{
+		SNOR_HWCAPS_READ_1_1_2,
+		BFPT_DWORD(1), BIT(16),	/* Supported bit */
+		BFPT_DWORD(4), 0,	/* Settings */
+		SNOR_PROTO_1_1_2,
+	},
+
+	/* Fast Read 1-2-2 */
+	{
+		SNOR_HWCAPS_READ_1_2_2,
+		BFPT_DWORD(1), BIT(20),	/* Supported bit */
+		BFPT_DWORD(4), 16,	/* Settings */
+		SNOR_PROTO_1_2_2,
+	},
+
+	/* Fast Read 2-2-2 */
+	{
+		SNOR_HWCAPS_READ_2_2_2,
+		BFPT_DWORD(5),  BIT(0),	/* Supported bit */
+		BFPT_DWORD(6), 16,	/* Settings */
+		SNOR_PROTO_2_2_2,
+	},
+
+	/* Fast Read 1-1-4 */
+	{
+		SNOR_HWCAPS_READ_1_1_4,
+		BFPT_DWORD(1), BIT(22),	/* Supported bit */
+		BFPT_DWORD(3), 16,	/* Settings */
+		SNOR_PROTO_1_1_4,
+	},
+
+	/* Fast Read 1-4-4 */
+	{
+		SNOR_HWCAPS_READ_1_4_4,
+		BFPT_DWORD(1), BIT(21),	/* Supported bit */
+		BFPT_DWORD(3), 0,	/* Settings */
+		SNOR_PROTO_1_4_4,
+	},
+
+	/* Fast Read 4-4-4 */
+	{
+		SNOR_HWCAPS_READ_4_4_4,
+		BFPT_DWORD(5), BIT(4),	/* Supported bit */
+		BFPT_DWORD(7), 16,	/* Settings */
+		SNOR_PROTO_4_4_4,
+	},
+};
+
+static const struct sfdp_bfpt_erase sfdp_bfpt_erases[] = {
+	/* Erase Type 1 in DWORD8 bits[15:0] */
+	{BFPT_DWORD(8), 0},
+
+	/* Erase Type 2 in DWORD8 bits[31:16] */
+	{BFPT_DWORD(8), 16},
+
+	/* Erase Type 3 in DWORD9 bits[15:0] */
+	{BFPT_DWORD(9), 0},
+
+	/* Erase Type 4 in DWORD9 bits[31:16] */
+	{BFPT_DWORD(9), 16},
+};
+
+/**
+ * spi_nor_set_erase_settings_from_bfpt() - set erase type settings from BFPT
+ * @erase:	pointer to a structure that describes a SPI NOR erase type
+ * @size:	the size of the sector/block erased by the erase type
+ * @opcode:	the SPI command op code to erase the sector/block
+ * @i:		erase type index as sorted in the Basic Flash Parameter Table
+ *
+ * The supported Erase Types will be sorted at init in ascending order, with
+ * the smallest Erase Type size being the first member in the erase_type array
+ * of the spi_nor_erase_map structure. Save the Erase Type index as sorted in
+ * the Basic Flash Parameter Table since it will be used later on to
+ * synchronize with the supported Erase Types defined in SFDP optional tables.
+ */
+static void
+spi_nor_set_erase_settings_from_bfpt(struct spi_nor_erase_type *erase,
+				     u32 size, u8 opcode, u8 i)
+{
+	erase->idx = i;
+	spi_nor_set_erase_type(erase, size, opcode);
+}
+
+/**
+ * spi_nor_map_cmp_erase_type() - compare the map's erase types by size
+ * @l:	member in the left half of the map's erase_type array
+ * @r:	member in the right half of the map's erase_type array
+ *
+ * Comparison function used in the sort() call to sort in ascending order the
+ * map's erase types, the smallest erase type size being the first member in the
+ * sorted erase_type array.
+ *
+ * Return: the result of @l->size - @r->size
+ */
+static int spi_nor_map_cmp_erase_type(const void *l, const void *r)
+{
+	const struct spi_nor_erase_type *left = l, *right = r;
+
+	return left->size - right->size;
+}
+
+/**
+ * spi_nor_sort_erase_mask() - sort erase mask
+ * @map:	the erase map of the SPI NOR
+ * @erase_mask:	the erase type mask to be sorted
+ *
+ * Replicate the sort done for the map's erase types in BFPT: sort the erase
+ * mask in ascending order with the smallest erase type size starting from
+ * BIT(0) in the sorted erase mask.
+ *
+ * Return: sorted erase mask.
+ */
+static u8 spi_nor_sort_erase_mask(struct spi_nor_erase_map *map, u8 erase_mask)
+{
+	struct spi_nor_erase_type *erase_type = map->erase_type;
+	int i;
+	u8 sorted_erase_mask = 0;
+
+	if (!erase_mask)
+		return 0;
+
+	/* Replicate the sort done for the map's erase types. */
+	for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++)
+		if (erase_type[i].size && erase_mask & BIT(erase_type[i].idx))
+			sorted_erase_mask |= BIT(i);
+
+	return sorted_erase_mask;
+}
+
+/**
+ * spi_nor_regions_sort_erase_types() - sort erase types in each region
+ * @map:	the erase map of the SPI NOR
+ *
+ * Function assumes that the erase types defined in the erase map are already
+ * sorted in ascending order, with the smallest erase type size being the first
+ * member in the erase_type array. It replicates the sort done for the map's
+ * erase types. Each region's erase bitmask will indicate which erase types are
+ * supported from the sorted erase types defined in the erase map.
+ * Sort the all region's erase type at init in order to speed up the process of
+ * finding the best erase command at runtime.
+ */
+static void spi_nor_regions_sort_erase_types(struct spi_nor_erase_map *map)
+{
+	struct spi_nor_erase_region *region = map->regions;
+	u8 region_erase_mask, sorted_erase_mask;
+
+	while (region) {
+		region_erase_mask = region->offset & SNOR_ERASE_TYPE_MASK;
+
+		sorted_erase_mask = spi_nor_sort_erase_mask(map,
+							    region_erase_mask);
+
+		/* Overwrite erase mask. */
+		region->offset = (region->offset & ~SNOR_ERASE_TYPE_MASK) |
+				 sorted_erase_mask;
+
+		region = spi_nor_region_next(region);
+	}
+}
+
+/**
+ * spi_nor_parse_bfpt() - read and parse the Basic Flash Parameter Table.
+ * @nor:		pointer to a 'struct spi_nor'
+ * @bfpt_header:	pointer to the 'struct sfdp_parameter_header' describing
+ *			the Basic Flash Parameter Table length and version
+ * @params:		pointer to the 'struct spi_nor_flash_parameter' to be
+ *			filled
+ *
+ * The Basic Flash Parameter Table is the main and only mandatory table as
+ * defined by the SFDP (JESD216) specification.
+ * It provides us with the total size (memory density) of the data array and
+ * the number of address bytes for Fast Read, Page Program and Sector Erase
+ * commands.
+ * For Fast READ commands, it also gives the number of mode clock cycles and
+ * wait states (regrouped in the number of dummy clock cycles) for each
+ * supported instruction op code.
+ * For Page Program, the page size is now available since JESD216 rev A, however
+ * the supported instruction op codes are still not provided.
+ * For Sector Erase commands, this table stores the supported instruction op
+ * codes and the associated sector sizes.
+ * Finally, the Quad Enable Requirements (QER) are also available since JESD216
+ * rev A. The QER bits encode the manufacturer dependent procedure to be
+ * executed to set the Quad Enable (QE) bit in some internal register of the
+ * Quad SPI memory. Indeed the QE bit, when it exists, must be set before
+ * sending any Quad SPI command to the memory. Actually, setting the QE bit
+ * tells the memory to reassign its WP# and HOLD#/RESET# pins to functions IO2
+ * and IO3 hence enabling 4 (Quad) I/O lines.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_parse_bfpt(struct spi_nor *nor,
+			      const struct sfdp_parameter_header *bfpt_header,
+			      struct spi_nor_flash_parameter *params)
+{
+	struct spi_nor_erase_map *map = &params->erase_map;
+	struct spi_nor_erase_type *erase_type = map->erase_type;
+	struct sfdp_bfpt bfpt;
+	size_t len;
+	int i, cmd, err;
+	u32 addr;
+	u16 half;
+	u8 erase_mask;
+
+	/* JESD216 Basic Flash Parameter Table length is at least 9 DWORDs. */
+	if (bfpt_header->length < BFPT_DWORD_MAX_JESD216)
+		return -EINVAL;
+
+	/* Read the Basic Flash Parameter Table. */
+	len = min_t(size_t, sizeof(bfpt),
+		    bfpt_header->length * sizeof(u32));
+	addr = SFDP_PARAM_HEADER_PTP(bfpt_header);
+	memset(&bfpt, 0, sizeof(bfpt));
+	err = spi_nor_read_sfdp_dma_unsafe(nor,  addr, len, &bfpt);
+	if (err < 0)
+		return err;
+
+	/* Fix endianness of the BFPT DWORDs. */
+	le32_to_cpu_array(bfpt.dwords, BFPT_DWORD_MAX);
+
+	/* Number of address bytes. */
+	switch (bfpt.dwords[BFPT_DWORD(1)] & BFPT_DWORD1_ADDRESS_BYTES_MASK) {
+	case BFPT_DWORD1_ADDRESS_BYTES_3_ONLY:
+		nor->addr_width = 3;
+		break;
+
+	case BFPT_DWORD1_ADDRESS_BYTES_4_ONLY:
+		nor->addr_width = 4;
+		break;
+
+	default:
+		break;
+	}
+
+	/* Flash Memory Density (in bits). */
+	params->size = bfpt.dwords[BFPT_DWORD(2)];
+	if (params->size & BIT(31)) {
+		params->size &= ~BIT(31);
+
+		/*
+		 * Prevent overflows on params->size. Anyway, a NOR of 2^64
+		 * bits is unlikely to exist so this error probably means
+		 * the BFPT we are reading is corrupted/wrong.
+		 */
+		if (params->size > 63)
+			return -EINVAL;
+
+		params->size = 1ULL << params->size;
+	} else {
+		params->size++;
+	}
+	params->size >>= 3; /* Convert to bytes. */
+
+	/* Fast Read settings. */
+	for (i = 0; i < ARRAY_SIZE(sfdp_bfpt_reads); i++) {
+		const struct sfdp_bfpt_read *rd = &sfdp_bfpt_reads[i];
+		struct spi_nor_read_command *read;
+
+		if (!(bfpt.dwords[rd->supported_dword] & rd->supported_bit)) {
+			params->hwcaps.mask &= ~rd->hwcaps;
+			continue;
+		}
+
+		params->hwcaps.mask |= rd->hwcaps;
+		cmd = spi_nor_hwcaps_read2cmd(rd->hwcaps);
+		read = &params->reads[cmd];
+		half = bfpt.dwords[rd->settings_dword] >> rd->settings_shift;
+		spi_nor_set_read_settings_from_bfpt(read, half, rd->proto);
+	}
+
+	/*
+	 * Sector Erase settings. Reinitialize the uniform erase map using the
+	 * Erase Types defined in the bfpt table.
+	 */
+	erase_mask = 0;
+	memset(&params->erase_map, 0, sizeof(params->erase_map));
+	for (i = 0; i < ARRAY_SIZE(sfdp_bfpt_erases); i++) {
+		const struct sfdp_bfpt_erase *er = &sfdp_bfpt_erases[i];
+		u32 erasesize;
+		u8 opcode;
+
+		half = bfpt.dwords[er->dword] >> er->shift;
+		erasesize = half & 0xff;
+
+		/* erasesize == 0 means this Erase Type is not supported. */
+		if (!erasesize)
+			continue;
+
+		erasesize = 1U << erasesize;
+		opcode = (half >> 8) & 0xff;
+		erase_mask |= BIT(i);
+		spi_nor_set_erase_settings_from_bfpt(&erase_type[i], erasesize,
+						     opcode, i);
+	}
+	spi_nor_init_uniform_erase_map(map, erase_mask, params->size);
+	/*
+	 * Sort all the map's Erase Types in ascending order with the smallest
+	 * erase size being the first member in the erase_type array.
+	 */
+	sort(erase_type, SNOR_ERASE_TYPE_MAX, sizeof(erase_type[0]),
+	     spi_nor_map_cmp_erase_type, NULL);
+	/*
+	 * Sort the erase types in the uniform region in order to update the
+	 * uniform_erase_type bitmask. The bitmask will be used later on when
+	 * selecting the uniform erase.
+	 */
+	spi_nor_regions_sort_erase_types(map);
+	map->uniform_erase_type = map->uniform_region.offset &
+				  SNOR_ERASE_TYPE_MASK;
+
+	/* Stop here if not JESD216 rev A or later. */
+	if (bfpt_header->length < BFPT_DWORD_MAX)
+		return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt,
+						params);
+
+	/* Page size: this field specifies 'N' so the page size = 2^N bytes. */
+	params->page_size = bfpt.dwords[BFPT_DWORD(11)];
+	params->page_size &= BFPT_DWORD11_PAGE_SIZE_MASK;
+	params->page_size >>= BFPT_DWORD11_PAGE_SIZE_SHIFT;
+	params->page_size = 1U << params->page_size;
+
+	/* Quad Enable Requirements. */
+	switch (bfpt.dwords[BFPT_DWORD(15)] & BFPT_DWORD15_QER_MASK) {
+	case BFPT_DWORD15_QER_NONE:
+		params->quad_enable = NULL;
+		break;
+
+	case BFPT_DWORD15_QER_SR2_BIT1_BUGGY:
+		/*
+		 * Writing only one byte to the Status Register has the
+		 * side-effect of clearing Status Register 2.
+		 */
+	case BFPT_DWORD15_QER_SR2_BIT1_NO_RD:
+		/*
+		 * Read Configuration Register (35h) instruction is not
+		 * supported.
+		 */
+		nor->flags |= SNOR_F_HAS_16BIT_SR | SNOR_F_NO_READ_CR;
+		params->quad_enable = spi_nor_sr2_bit1_quad_enable;
+		break;
+
+	case BFPT_DWORD15_QER_SR1_BIT6:
+		nor->flags &= ~SNOR_F_HAS_16BIT_SR;
+		params->quad_enable = spi_nor_sr1_bit6_quad_enable;
+		break;
+
+	case BFPT_DWORD15_QER_SR2_BIT7:
+		nor->flags &= ~SNOR_F_HAS_16BIT_SR;
+		params->quad_enable = spi_nor_sr2_bit7_quad_enable;
+		break;
+
+	case BFPT_DWORD15_QER_SR2_BIT1:
+		/*
+		 * JESD216 rev B or later does not specify if writing only one
+		 * byte to the Status Register clears or not the Status
+		 * Register 2, so let's be cautious and keep the default
+		 * assumption of a 16-bit Write Status (01h) command.
+		 */
+		nor->flags |= SNOR_F_HAS_16BIT_SR;
+
+		params->quad_enable = spi_nor_sr2_bit1_quad_enable;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt, params);
+}
+
+/**
+ * spi_nor_smpt_addr_width() - return the address width used in the
+ *			       configuration detection command.
+ * @nor:	pointer to a 'struct spi_nor'
+ * @settings:	configuration detection command descriptor, dword1
+ */
+static u8 spi_nor_smpt_addr_width(const struct spi_nor *nor, const u32 settings)
+{
+	switch (settings & SMPT_CMD_ADDRESS_LEN_MASK) {
+	case SMPT_CMD_ADDRESS_LEN_0:
+		return 0;
+	case SMPT_CMD_ADDRESS_LEN_3:
+		return 3;
+	case SMPT_CMD_ADDRESS_LEN_4:
+		return 4;
+	case SMPT_CMD_ADDRESS_LEN_USE_CURRENT:
+	default:
+		return nor->addr_width;
+	}
+}
+
+/**
+ * spi_nor_smpt_read_dummy() - return the configuration detection command read
+ *			       latency, in clock cycles.
+ * @nor:	pointer to a 'struct spi_nor'
+ * @settings:	configuration detection command descriptor, dword1
+ *
+ * Return: the number of dummy cycles for an SMPT read
+ */
+static u8 spi_nor_smpt_read_dummy(const struct spi_nor *nor, const u32 settings)
+{
+	u8 read_dummy = SMPT_CMD_READ_DUMMY(settings);
+
+	if (read_dummy == SMPT_CMD_READ_DUMMY_IS_VARIABLE)
+		return nor->read_dummy;
+	return read_dummy;
+}
+
+/**
+ * spi_nor_get_map_in_use() - get the configuration map in use
+ * @nor:	pointer to a 'struct spi_nor'
+ * @smpt:	pointer to the sector map parameter table
+ * @smpt_len:	sector map parameter table length
+ *
+ * Return: pointer to the map in use, ERR_PTR(-errno) otherwise.
+ */
+static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt,
+					 u8 smpt_len)
+{
+	const u32 *ret;
+	u8 *buf;
+	u32 addr;
+	int err;
+	u8 i;
+	u8 addr_width, read_opcode, read_dummy;
+	u8 read_data_mask, map_id;
+
+	/* Use a kmalloc'ed bounce buffer to guarantee it is DMA-able. */
+	buf = kmalloc(sizeof(*buf), GFP_KERNEL);
+	if (!buf)
+		return ERR_PTR(-ENOMEM);
+
+	addr_width = nor->addr_width;
+	read_dummy = nor->read_dummy;
+	read_opcode = nor->read_opcode;
+
+	map_id = 0;
+	/* Determine if there are any optional Detection Command Descriptors */
+	for (i = 0; i < smpt_len; i += 2) {
+		if (smpt[i] & SMPT_DESC_TYPE_MAP)
+			break;
+
+		read_data_mask = SMPT_CMD_READ_DATA(smpt[i]);
+		nor->addr_width = spi_nor_smpt_addr_width(nor, smpt[i]);
+		nor->read_dummy = spi_nor_smpt_read_dummy(nor, smpt[i]);
+		nor->read_opcode = SMPT_CMD_OPCODE(smpt[i]);
+		addr = smpt[i + 1];
+
+		err = spi_nor_read_raw(nor, addr, 1, buf);
+		if (err) {
+			ret = ERR_PTR(err);
+			goto out;
+		}
+
+		/*
+		 * Build an index value that is used to select the Sector Map
+		 * Configuration that is currently in use.
+		 */
+		map_id = map_id << 1 | !!(*buf & read_data_mask);
+	}
+
+	/*
+	 * If command descriptors are provided, they always precede map
+	 * descriptors in the table. There is no need to start the iteration
+	 * over smpt array all over again.
+	 *
+	 * Find the matching configuration map.
+	 */
+	ret = ERR_PTR(-EINVAL);
+	while (i < smpt_len) {
+		if (SMPT_MAP_ID(smpt[i]) == map_id) {
+			ret = smpt + i;
+			break;
+		}
+
+		/*
+		 * If there are no more configuration map descriptors and no
+		 * configuration ID matched the configuration identifier, the
+		 * sector address map is unknown.
+		 */
+		if (smpt[i] & SMPT_DESC_END)
+			break;
+
+		/* increment the table index to the next map */
+		i += SMPT_MAP_REGION_COUNT(smpt[i]) + 1;
+	}
+
+	/* fall through */
+out:
+	kfree(buf);
+	nor->addr_width = addr_width;
+	nor->read_dummy = read_dummy;
+	nor->read_opcode = read_opcode;
+	return ret;
+}
+
+static void spi_nor_region_mark_end(struct spi_nor_erase_region *region)
+{
+	region->offset |= SNOR_LAST_REGION;
+}
+
+static void spi_nor_region_mark_overlay(struct spi_nor_erase_region *region)
+{
+	region->offset |= SNOR_OVERLAID_REGION;
+}
+
+/**
+ * spi_nor_region_check_overlay() - set overlay bit when the region is overlaid
+ * @region:	pointer to a structure that describes a SPI NOR erase region
+ * @erase:	pointer to a structure that describes a SPI NOR erase type
+ * @erase_type:	erase type bitmask
+ */
+static void
+spi_nor_region_check_overlay(struct spi_nor_erase_region *region,
+			     const struct spi_nor_erase_type *erase,
+			     const u8 erase_type)
+{
+	int i;
+
+	for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) {
+		if (!(erase_type & BIT(i)))
+			continue;
+		if (region->size & erase[i].size_mask) {
+			spi_nor_region_mark_overlay(region);
+			return;
+		}
+	}
+}
+
+/**
+ * spi_nor_init_non_uniform_erase_map() - initialize the non-uniform erase map
+ * @nor:	pointer to a 'struct spi_nor'
+ * @params:     pointer to a duplicate 'struct spi_nor_flash_parameter' that is
+ *              used for storing SFDP parsed data
+ * @smpt:	pointer to the sector map parameter table
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int
+spi_nor_init_non_uniform_erase_map(struct spi_nor *nor,
+				   struct spi_nor_flash_parameter *params,
+				   const u32 *smpt)
+{
+	struct spi_nor_erase_map *map = &params->erase_map;
+	struct spi_nor_erase_type *erase = map->erase_type;
+	struct spi_nor_erase_region *region;
+	u64 offset;
+	u32 region_count;
+	int i, j;
+	u8 uniform_erase_type, save_uniform_erase_type;
+	u8 erase_type, regions_erase_type;
+
+	region_count = SMPT_MAP_REGION_COUNT(*smpt);
+	/*
+	 * The regions will be freed when the driver detaches from the
+	 * device.
+	 */
+	region = devm_kcalloc(nor->dev, region_count, sizeof(*region),
+			      GFP_KERNEL);
+	if (!region)
+		return -ENOMEM;
+	map->regions = region;
+
+	uniform_erase_type = 0xff;
+	regions_erase_type = 0;
+	offset = 0;
+	/* Populate regions. */
+	for (i = 0; i < region_count; i++) {
+		j = i + 1; /* index for the region dword */
+		region[i].size = SMPT_MAP_REGION_SIZE(smpt[j]);
+		erase_type = SMPT_MAP_REGION_ERASE_TYPE(smpt[j]);
+		region[i].offset = offset | erase_type;
+
+		spi_nor_region_check_overlay(&region[i], erase, erase_type);
+
+		/*
+		 * Save the erase types that are supported in all regions and
+		 * can erase the entire flash memory.
+		 */
+		uniform_erase_type &= erase_type;
+
+		/*
+		 * regions_erase_type mask will indicate all the erase types
+		 * supported in this configuration map.
+		 */
+		regions_erase_type |= erase_type;
+
+		offset = (region[i].offset & ~SNOR_ERASE_FLAGS_MASK) +
+			 region[i].size;
+	}
+
+	save_uniform_erase_type = map->uniform_erase_type;
+	map->uniform_erase_type = spi_nor_sort_erase_mask(map,
+							  uniform_erase_type);
+
+	if (!regions_erase_type) {
+		/*
+		 * Roll back to the previous uniform_erase_type mask, SMPT is
+		 * broken.
+		 */
+		map->uniform_erase_type = save_uniform_erase_type;
+		return -EINVAL;
+	}
+
+	/*
+	 * BFPT advertises all the erase types supported by all the possible
+	 * map configurations. Mask out the erase types that are not supported
+	 * by the current map configuration.
+	 */
+	for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++)
+		if (!(regions_erase_type & BIT(erase[i].idx)))
+			spi_nor_set_erase_type(&erase[i], 0, 0xFF);
+
+	spi_nor_region_mark_end(&region[i - 1]);
+
+	return 0;
+}
+
+/**
+ * spi_nor_parse_smpt() - parse Sector Map Parameter Table
+ * @nor:		pointer to a 'struct spi_nor'
+ * @smpt_header:	sector map parameter table header
+ * @params:		pointer to a duplicate 'struct spi_nor_flash_parameter'
+ *                      that is used for storing SFDP parsed data
+ *
+ * This table is optional, but when available, we parse it to identify the
+ * location and size of sectors within the main data array of the flash memory
+ * device and to identify which Erase Types are supported by each sector.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_parse_smpt(struct spi_nor *nor,
+			      const struct sfdp_parameter_header *smpt_header,
+			      struct spi_nor_flash_parameter *params)
+{
+	const u32 *sector_map;
+	u32 *smpt;
+	size_t len;
+	u32 addr;
+	int ret;
+
+	/* Read the Sector Map Parameter Table. */
+	len = smpt_header->length * sizeof(*smpt);
+	smpt = kmalloc(len, GFP_KERNEL);
+	if (!smpt)
+		return -ENOMEM;
+
+	addr = SFDP_PARAM_HEADER_PTP(smpt_header);
+	ret = spi_nor_read_sfdp(nor, addr, len, smpt);
+	if (ret)
+		goto out;
+
+	/* Fix endianness of the SMPT DWORDs. */
+	le32_to_cpu_array(smpt, smpt_header->length);
+
+	sector_map = spi_nor_get_map_in_use(nor, smpt, smpt_header->length);
+	if (IS_ERR(sector_map)) {
+		ret = PTR_ERR(sector_map);
+		goto out;
+	}
+
+	ret = spi_nor_init_non_uniform_erase_map(nor, params, sector_map);
+	if (ret)
+		goto out;
+
+	spi_nor_regions_sort_erase_types(&params->erase_map);
+	/* fall through */
+out:
+	kfree(smpt);
+	return ret;
+}
+
+/**
+ * spi_nor_parse_4bait() - parse the 4-Byte Address Instruction Table
+ * @nor:		pointer to a 'struct spi_nor'.
+ * @param_header:	pointer to the 'struct sfdp_parameter_header' describing
+ *			the 4-Byte Address Instruction Table length and version.
+ * @params:		pointer to the 'struct spi_nor_flash_parameter' to be.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_parse_4bait(struct spi_nor *nor,
+			       const struct sfdp_parameter_header *param_header,
+			       struct spi_nor_flash_parameter *params)
+{
+	static const struct sfdp_4bait reads[] = {
+		{ SNOR_HWCAPS_READ,		BIT(0) },
+		{ SNOR_HWCAPS_READ_FAST,	BIT(1) },
+		{ SNOR_HWCAPS_READ_1_1_2,	BIT(2) },
+		{ SNOR_HWCAPS_READ_1_2_2,	BIT(3) },
+		{ SNOR_HWCAPS_READ_1_1_4,	BIT(4) },
+		{ SNOR_HWCAPS_READ_1_4_4,	BIT(5) },
+		{ SNOR_HWCAPS_READ_1_1_1_DTR,	BIT(13) },
+		{ SNOR_HWCAPS_READ_1_2_2_DTR,	BIT(14) },
+		{ SNOR_HWCAPS_READ_1_4_4_DTR,	BIT(15) },
+	};
+	static const struct sfdp_4bait programs[] = {
+		{ SNOR_HWCAPS_PP,		BIT(6) },
+		{ SNOR_HWCAPS_PP_1_1_4,		BIT(7) },
+		{ SNOR_HWCAPS_PP_1_4_4,		BIT(8) },
+	};
+	static const struct sfdp_4bait erases[SNOR_ERASE_TYPE_MAX] = {
+		{ 0u /* not used */,		BIT(9) },
+		{ 0u /* not used */,		BIT(10) },
+		{ 0u /* not used */,		BIT(11) },
+		{ 0u /* not used */,		BIT(12) },
+	};
+	struct spi_nor_pp_command *params_pp = params->page_programs;
+	struct spi_nor_erase_map *map = &params->erase_map;
+	struct spi_nor_erase_type *erase_type = map->erase_type;
+	u32 *dwords;
+	size_t len;
+	u32 addr, discard_hwcaps, read_hwcaps, pp_hwcaps, erase_mask;
+	int i, ret;
+
+	if (param_header->major != SFDP_JESD216_MAJOR ||
+	    param_header->length < SFDP_4BAIT_DWORD_MAX)
+		return -EINVAL;
+
+	/* Read the 4-byte Address Instruction Table. */
+	len = sizeof(*dwords) * SFDP_4BAIT_DWORD_MAX;
+
+	/* Use a kmalloc'ed bounce buffer to guarantee it is DMA-able. */
+	dwords = kmalloc(len, GFP_KERNEL);
+	if (!dwords)
+		return -ENOMEM;
+
+	addr = SFDP_PARAM_HEADER_PTP(param_header);
+	ret = spi_nor_read_sfdp(nor, addr, len, dwords);
+	if (ret)
+		goto out;
+
+	/* Fix endianness of the 4BAIT DWORDs. */
+	le32_to_cpu_array(dwords, SFDP_4BAIT_DWORD_MAX);
+
+	/*
+	 * Compute the subset of (Fast) Read commands for which the 4-byte
+	 * version is supported.
+	 */
+	discard_hwcaps = 0;
+	read_hwcaps = 0;
+	for (i = 0; i < ARRAY_SIZE(reads); i++) {
+		const struct sfdp_4bait *read = &reads[i];
+
+		discard_hwcaps |= read->hwcaps;
+		if ((params->hwcaps.mask & read->hwcaps) &&
+		    (dwords[0] & read->supported_bit))
+			read_hwcaps |= read->hwcaps;
+	}
+
+	/*
+	 * Compute the subset of Page Program commands for which the 4-byte
+	 * version is supported.
+	 */
+	pp_hwcaps = 0;
+	for (i = 0; i < ARRAY_SIZE(programs); i++) {
+		const struct sfdp_4bait *program = &programs[i];
+
+		/*
+		 * The 4 Byte Address Instruction (Optional) Table is the only
+		 * SFDP table that indicates support for Page Program Commands.
+		 * Bypass the params->hwcaps.mask and consider 4BAIT the biggest
+		 * authority for specifying Page Program support.
+		 */
+		discard_hwcaps |= program->hwcaps;
+		if (dwords[0] & program->supported_bit)
+			pp_hwcaps |= program->hwcaps;
+	}
+
+	/*
+	 * Compute the subset of Sector Erase commands for which the 4-byte
+	 * version is supported.
+	 */
+	erase_mask = 0;
+	for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) {
+		const struct sfdp_4bait *erase = &erases[i];
+
+		if (dwords[0] & erase->supported_bit)
+			erase_mask |= BIT(i);
+	}
+
+	/* Replicate the sort done for the map's erase types in BFPT. */
+	erase_mask = spi_nor_sort_erase_mask(map, erase_mask);
+
+	/*
+	 * We need at least one 4-byte op code per read, program and erase
+	 * operation; the .read(), .write() and .erase() hooks share the
+	 * nor->addr_width value.
+	 */
+	if (!read_hwcaps || !pp_hwcaps || !erase_mask)
+		goto out;
+
+	/*
+	 * Discard all operations from the 4-byte instruction set which are
+	 * not supported by this memory.
+	 */
+	params->hwcaps.mask &= ~discard_hwcaps;
+	params->hwcaps.mask |= (read_hwcaps | pp_hwcaps);
+
+	/* Use the 4-byte address instruction set. */
+	for (i = 0; i < SNOR_CMD_READ_MAX; i++) {
+		struct spi_nor_read_command *read_cmd = &params->reads[i];
+
+		read_cmd->opcode = spi_nor_convert_3to4_read(read_cmd->opcode);
+	}
+
+	/* 4BAIT is the only SFDP table that indicates page program support. */
+	if (pp_hwcaps & SNOR_HWCAPS_PP)
+		spi_nor_set_pp_settings(&params_pp[SNOR_CMD_PP],
+					SPINOR_OP_PP_4B, SNOR_PROTO_1_1_1);
+	if (pp_hwcaps & SNOR_HWCAPS_PP_1_1_4)
+		spi_nor_set_pp_settings(&params_pp[SNOR_CMD_PP_1_1_4],
+					SPINOR_OP_PP_1_1_4_4B,
+					SNOR_PROTO_1_1_4);
+	if (pp_hwcaps & SNOR_HWCAPS_PP_1_4_4)
+		spi_nor_set_pp_settings(&params_pp[SNOR_CMD_PP_1_4_4],
+					SPINOR_OP_PP_1_4_4_4B,
+					SNOR_PROTO_1_4_4);
+
+	for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) {
+		if (erase_mask & BIT(i))
+			erase_type[i].opcode = (dwords[1] >>
+						erase_type[i].idx * 8) & 0xFF;
+		else
+			spi_nor_set_erase_type(&erase_type[i], 0u, 0xFF);
+	}
+
+	/*
+	 * We set SNOR_F_HAS_4BAIT in order to skip spi_nor_set_4byte_opcodes()
+	 * later because we already did the conversion to 4byte opcodes. Also,
+	 * this latest function implements a legacy quirk for the erase size of
+	 * Spansion memory. However this quirk is no longer needed with new
+	 * SFDP compliant memories.
+	 */
+	nor->addr_width = 4;
+	nor->flags |= SNOR_F_4B_OPCODES | SNOR_F_HAS_4BAIT;
+
+	/* fall through */
+out:
+	kfree(dwords);
+	return ret;
+}
+
+/**
+ * spi_nor_parse_sfdp() - parse the Serial Flash Discoverable Parameters.
+ * @nor:		pointer to a 'struct spi_nor'
+ * @params:		pointer to the 'struct spi_nor_flash_parameter' to be
+ *			filled
+ *
+ * The Serial Flash Discoverable Parameters are described by the JEDEC JESD216
+ * specification. This is a standard which tends to supported by almost all
+ * (Q)SPI memory manufacturers. Those hard-coded tables allow us to learn at
+ * runtime the main parameters needed to perform basic SPI flash operations such
+ * as Fast Read, Page Program or Sector Erase commands.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_parse_sfdp(struct spi_nor *nor,
+		       struct spi_nor_flash_parameter *params)
+{
+	const struct sfdp_parameter_header *param_header, *bfpt_header;
+	struct sfdp_parameter_header *param_headers = NULL;
+	struct sfdp_header header;
+	struct device *dev = nor->dev;
+	size_t psize;
+	int i, err;
+
+	/* Get the SFDP header. */
+	err = spi_nor_read_sfdp_dma_unsafe(nor, 0, sizeof(header), &header);
+	if (err < 0)
+		return err;
+
+	/* Check the SFDP header version. */
+	if (le32_to_cpu(header.signature) != SFDP_SIGNATURE ||
+	    header.major != SFDP_JESD216_MAJOR)
+		return -EINVAL;
+
+	/*
+	 * Verify that the first and only mandatory parameter header is a
+	 * Basic Flash Parameter Table header as specified in JESD216.
+	 */
+	bfpt_header = &header.bfpt_header;
+	if (SFDP_PARAM_HEADER_ID(bfpt_header) != SFDP_BFPT_ID ||
+	    bfpt_header->major != SFDP_JESD216_MAJOR)
+		return -EINVAL;
+
+	/*
+	 * Allocate memory then read all parameter headers with a single
+	 * Read SFDP command. These parameter headers will actually be parsed
+	 * twice: a first time to get the latest revision of the basic flash
+	 * parameter table, then a second time to handle the supported optional
+	 * tables.
+	 * Hence we read the parameter headers once for all to reduce the
+	 * processing time. Also we use kmalloc() instead of devm_kmalloc()
+	 * because we don't need to keep these parameter headers: the allocated
+	 * memory is always released with kfree() before exiting this function.
+	 */
+	if (header.nph) {
+		psize = header.nph * sizeof(*param_headers);
+
+		param_headers = kmalloc(psize, GFP_KERNEL);
+		if (!param_headers)
+			return -ENOMEM;
+
+		err = spi_nor_read_sfdp(nor, sizeof(header),
+					psize, param_headers);
+		if (err < 0) {
+			dev_dbg(dev, "failed to read SFDP parameter headers\n");
+			goto exit;
+		}
+	}
+
+	/*
+	 * Check other parameter headers to get the latest revision of
+	 * the basic flash parameter table.
+	 */
+	for (i = 0; i < header.nph; i++) {
+		param_header = &param_headers[i];
+
+		if (SFDP_PARAM_HEADER_ID(param_header) == SFDP_BFPT_ID &&
+		    param_header->major == SFDP_JESD216_MAJOR &&
+		    (param_header->minor > bfpt_header->minor ||
+		     (param_header->minor == bfpt_header->minor &&
+		      param_header->length > bfpt_header->length)))
+			bfpt_header = param_header;
+	}
+
+	err = spi_nor_parse_bfpt(nor, bfpt_header, params);
+	if (err)
+		goto exit;
+
+	/* Parse optional parameter tables. */
+	for (i = 0; i < header.nph; i++) {
+		param_header = &param_headers[i];
+
+		switch (SFDP_PARAM_HEADER_ID(param_header)) {
+		case SFDP_SECTOR_MAP_ID:
+			err = spi_nor_parse_smpt(nor, param_header, params);
+			break;
+
+		case SFDP_4BAIT_ID:
+			err = spi_nor_parse_4bait(nor, param_header, params);
+			break;
+
+		default:
+			break;
+		}
+
+		if (err) {
+			dev_warn(dev, "Failed to parse optional parameter table: %04x\n",
+				 SFDP_PARAM_HEADER_ID(param_header));
+			/*
+			 * Let's not drop all information we extracted so far
+			 * if optional table parsers fail. In case of failing,
+			 * each optional parser is responsible to roll back to
+			 * the previously known spi_nor data.
+			 */
+			err = 0;
+		}
+	}
+
+exit:
+	kfree(param_headers);
+	return err;
+}
diff --git a/drivers/mtd/spi-nor/sfdp.h b/drivers/mtd/spi-nor/sfdp.h
new file mode 100644
index 0000000..e0a8ded
--- /dev/null
+++ b/drivers/mtd/spi-nor/sfdp.h
@@ -0,0 +1,98 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#ifndef __LINUX_MTD_SFDP_H
+#define __LINUX_MTD_SFDP_H
+
+/* Basic Flash Parameter Table */
+
+/*
+ * JESD216 rev B defines a Basic Flash Parameter Table of 16 DWORDs.
+ * They are indexed from 1 but C arrays are indexed from 0.
+ */
+#define BFPT_DWORD(i)		((i) - 1)
+#define BFPT_DWORD_MAX		16
+
+struct sfdp_bfpt {
+	u32	dwords[BFPT_DWORD_MAX];
+};
+
+/* The first version of JESD216 defined only 9 DWORDs. */
+#define BFPT_DWORD_MAX_JESD216			9
+
+/* 1st DWORD. */
+#define BFPT_DWORD1_FAST_READ_1_1_2		BIT(16)
+#define BFPT_DWORD1_ADDRESS_BYTES_MASK		GENMASK(18, 17)
+#define BFPT_DWORD1_ADDRESS_BYTES_3_ONLY	(0x0UL << 17)
+#define BFPT_DWORD1_ADDRESS_BYTES_3_OR_4	(0x1UL << 17)
+#define BFPT_DWORD1_ADDRESS_BYTES_4_ONLY	(0x2UL << 17)
+#define BFPT_DWORD1_DTR				BIT(19)
+#define BFPT_DWORD1_FAST_READ_1_2_2		BIT(20)
+#define BFPT_DWORD1_FAST_READ_1_4_4		BIT(21)
+#define BFPT_DWORD1_FAST_READ_1_1_4		BIT(22)
+
+/* 5th DWORD. */
+#define BFPT_DWORD5_FAST_READ_2_2_2		BIT(0)
+#define BFPT_DWORD5_FAST_READ_4_4_4		BIT(4)
+
+/* 11th DWORD. */
+#define BFPT_DWORD11_PAGE_SIZE_SHIFT		4
+#define BFPT_DWORD11_PAGE_SIZE_MASK		GENMASK(7, 4)
+
+/* 15th DWORD. */
+
+/*
+ * (from JESD216 rev B)
+ * Quad Enable Requirements (QER):
+ * - 000b: Device does not have a QE bit. Device detects 1-1-4 and 1-4-4
+ *         reads based on instruction. DQ3/HOLD# functions are hold during
+ *         instruction phase.
+ * - 001b: QE is bit 1 of status register 2. It is set via Write Status with
+ *         two data bytes where bit 1 of the second byte is one.
+ *         [...]
+ *         Writing only one byte to the status register has the side-effect of
+ *         clearing status register 2, including the QE bit. The 100b code is
+ *         used if writing one byte to the status register does not modify
+ *         status register 2.
+ * - 010b: QE is bit 6 of status register 1. It is set via Write Status with
+ *         one data byte where bit 6 is one.
+ *         [...]
+ * - 011b: QE is bit 7 of status register 2. It is set via Write status
+ *         register 2 instruction 3Eh with one data byte where bit 7 is one.
+ *         [...]
+ *         The status register 2 is read using instruction 3Fh.
+ * - 100b: QE is bit 1 of status register 2. It is set via Write Status with
+ *         two data bytes where bit 1 of the second byte is one.
+ *         [...]
+ *         In contrast to the 001b code, writing one byte to the status
+ *         register does not modify status register 2.
+ * - 101b: QE is bit 1 of status register 2. Status register 1 is read using
+ *         Read Status instruction 05h. Status register2 is read using
+ *         instruction 35h. QE is set via Write Status instruction 01h with
+ *         two data bytes where bit 1 of the second byte is one.
+ *         [...]
+ */
+#define BFPT_DWORD15_QER_MASK			GENMASK(22, 20)
+#define BFPT_DWORD15_QER_NONE			(0x0UL << 20) /* Micron */
+#define BFPT_DWORD15_QER_SR2_BIT1_BUGGY		(0x1UL << 20)
+#define BFPT_DWORD15_QER_SR1_BIT6		(0x2UL << 20) /* Macronix */
+#define BFPT_DWORD15_QER_SR2_BIT7		(0x3UL << 20)
+#define BFPT_DWORD15_QER_SR2_BIT1_NO_RD		(0x4UL << 20)
+#define BFPT_DWORD15_QER_SR2_BIT1		(0x5UL << 20) /* Spansion */
+
+struct sfdp_parameter_header {
+	u8		id_lsb;
+	u8		minor;
+	u8		major;
+	u8		length; /* in double words */
+	u8		parameter_table_pointer[3]; /* byte address */
+	u8		id_msb;
+};
+
+int spi_nor_parse_sfdp(struct spi_nor *nor,
+		       struct spi_nor_flash_parameter *params);
+
+#endif /* __LINUX_MTD_SFDP_H */
diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
new file mode 100644
index 0000000..6756202
--- /dev/null
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static const struct flash_info spansion_parts[] = {
+	/* Spansion/Cypress -- single (large) sector size only, at least
+	 * for the chips listed here (without boot sectors).
+	 */
+	{ "s25sl032p",  INFO(0x010215, 0x4d00,  64 * 1024,  64,
+			     SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "s25sl064p",  INFO(0x010216, 0x4d00,  64 * 1024, 128,
+			     SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "s25fl128s0", INFO6(0x012018, 0x4d0080, 256 * 1024, 64,
+			      SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+			      USE_CLSR) },
+	{ "s25fl128s1", INFO6(0x012018, 0x4d0180, 64 * 1024, 256,
+			      SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+			      USE_CLSR) },
+	{ "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, USE_CLSR) },
+	{ "s25fl256s1", INFO(0x010219, 0x4d01,  64 * 1024, 512,
+			     SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+			     USE_CLSR) },
+	{ "s25fl512s",  INFO6(0x010220, 0x4d0080, 256 * 1024, 256,
+			      SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+			      SPI_NOR_HAS_LOCK | USE_CLSR) },
+	{ "s25fs512s",  INFO6(0x010220, 0x4d0081, 256 * 1024, 256,
+			      SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+			      USE_CLSR) },
+	{ "s70fl01gs",  INFO(0x010221, 0x4d00, 256 * 1024, 256, 0) },
+	{ "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024,  64, 0) },
+	{ "s25sl12801", INFO(0x012018, 0x0301,  64 * 1024, 256, 0) },
+	{ "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024,  64,
+			     SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+			     USE_CLSR) },
+	{ "s25fl129p1", INFO(0x012018, 0x4d01,  64 * 1024, 256,
+			     SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+			     USE_CLSR) },
+	{ "s25sl004a",  INFO(0x010212,      0,  64 * 1024,   8, 0) },
+	{ "s25sl008a",  INFO(0x010213,      0,  64 * 1024,  16, 0) },
+	{ "s25sl016a",  INFO(0x010214,      0,  64 * 1024,  32, 0) },
+	{ "s25sl032a",  INFO(0x010215,      0,  64 * 1024,  64, 0) },
+	{ "s25sl064a",  INFO(0x010216,      0,  64 * 1024, 128, 0) },
+	{ "s25fl004k",  INFO(0xef4013,      0,  64 * 1024,   8,
+			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "s25fl008k",  INFO(0xef4014,      0,  64 * 1024,  16,
+			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "s25fl016k",  INFO(0xef4015,      0,  64 * 1024,  32,
+			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "s25fl064k",  INFO(0xef4017,      0,  64 * 1024, 128, SECT_4K) },
+	{ "s25fl116k",  INFO(0x014015,      0,  64 * 1024,  32,
+			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "s25fl132k",  INFO(0x014016,      0,  64 * 1024,  64, SECT_4K) },
+	{ "s25fl164k",  INFO(0x014017,      0,  64 * 1024, 128, SECT_4K) },
+	{ "s25fl204k",  INFO(0x014013,      0,  64 * 1024,   8,
+			     SECT_4K | SPI_NOR_DUAL_READ) },
+	{ "s25fl208k",  INFO(0x014014,      0,  64 * 1024,  16,
+			     SECT_4K | SPI_NOR_DUAL_READ) },
+	{ "s25fl064l",  INFO(0x016017,      0,  64 * 1024, 128,
+			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+			     SPI_NOR_4B_OPCODES) },
+	{ "s25fl128l",  INFO(0x016018,      0,  64 * 1024, 256,
+			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+			     SPI_NOR_4B_OPCODES) },
+	{ "s25fl256l",  INFO(0x016019,      0,  64 * 1024, 512,
+			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+			     SPI_NOR_4B_OPCODES) },
+};
+
+static void spansion_post_sfdp_fixups(struct spi_nor *nor)
+{
+	if (nor->params->size <= SZ_16M)
+		return;
+
+	nor->flags |= SNOR_F_4B_OPCODES;
+	/* No small sector erase for 4-byte command set */
+	nor->erase_opcode = SPINOR_OP_SE;
+	nor->mtd.erasesize = nor->info->sector_size;
+}
+
+static const struct spi_nor_fixups spansion_fixups = {
+	.post_sfdp = spansion_post_sfdp_fixups,
+};
+
+const struct spi_nor_manufacturer spi_nor_spansion = {
+	.name = "spansion",
+	.parts = spansion_parts,
+	.nparts = ARRAY_SIZE(spansion_parts),
+	.fixups = &spansion_fixups,
+};
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
deleted file mode 100644
index 4fc632e..0000000
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ /dev/null
@@ -1,5434 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Based on m25p80.c, by Mike Lavender (mike@steroidmicros.com), with
- * influence from lart.c (Abraham Van Der Merwe) and mtd_dataflash.c
- *
- * Copyright (C) 2005, Intec Automation Inc.
- * Copyright (C) 2014, Freescale Semiconductor, Inc.
- */
-
-#include <linux/err.h>
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/mutex.h>
-#include <linux/math64.h>
-#include <linux/sizes.h>
-#include <linux/slab.h>
-#include <linux/sort.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/of_platform.h>
-#include <linux/sched/task_stack.h>
-#include <linux/spi/flash.h>
-#include <linux/mtd/spi-nor.h>
-
-/* Define max times to check status register before we give up. */
-
-/*
- * For everything but full-chip erase; probably could be much smaller, but kept
- * around for safety for now
- */
-#define DEFAULT_READY_WAIT_JIFFIES		(40UL * HZ)
-
-/*
- * For full-chip erase, calibrated to a 2MB flash (M25P16); should be scaled up
- * for larger flash
- */
-#define CHIP_ERASE_2MB_READY_WAIT_JIFFIES	(40UL * HZ)
-
-#define SPI_NOR_MAX_ID_LEN	6
-#define SPI_NOR_MAX_ADDR_WIDTH	4
-
-struct sfdp_parameter_header {
-	u8		id_lsb;
-	u8		minor;
-	u8		major;
-	u8		length; /* in double words */
-	u8		parameter_table_pointer[3]; /* byte address */
-	u8		id_msb;
-};
-
-#define SFDP_PARAM_HEADER_ID(p)	(((p)->id_msb << 8) | (p)->id_lsb)
-#define SFDP_PARAM_HEADER_PTP(p) \
-	(((p)->parameter_table_pointer[2] << 16) | \
-	 ((p)->parameter_table_pointer[1] <<  8) | \
-	 ((p)->parameter_table_pointer[0] <<  0))
-
-#define SFDP_BFPT_ID		0xff00	/* Basic Flash Parameter Table */
-#define SFDP_SECTOR_MAP_ID	0xff81	/* Sector Map Table */
-#define SFDP_4BAIT_ID		0xff84  /* 4-byte Address Instruction Table */
-
-#define SFDP_SIGNATURE		0x50444653U
-#define SFDP_JESD216_MAJOR	1
-#define SFDP_JESD216_MINOR	0
-#define SFDP_JESD216A_MINOR	5
-#define SFDP_JESD216B_MINOR	6
-
-struct sfdp_header {
-	u32		signature; /* Ox50444653U <=> "SFDP" */
-	u8		minor;
-	u8		major;
-	u8		nph; /* 0-base number of parameter headers */
-	u8		unused;
-
-	/* Basic Flash Parameter Table. */
-	struct sfdp_parameter_header	bfpt_header;
-};
-
-/* Basic Flash Parameter Table */
-
-/*
- * JESD216 rev B defines a Basic Flash Parameter Table of 16 DWORDs.
- * They are indexed from 1 but C arrays are indexed from 0.
- */
-#define BFPT_DWORD(i)		((i) - 1)
-#define BFPT_DWORD_MAX		16
-
-/* The first version of JESD216 defined only 9 DWORDs. */
-#define BFPT_DWORD_MAX_JESD216			9
-
-/* 1st DWORD. */
-#define BFPT_DWORD1_FAST_READ_1_1_2		BIT(16)
-#define BFPT_DWORD1_ADDRESS_BYTES_MASK		GENMASK(18, 17)
-#define BFPT_DWORD1_ADDRESS_BYTES_3_ONLY	(0x0UL << 17)
-#define BFPT_DWORD1_ADDRESS_BYTES_3_OR_4	(0x1UL << 17)
-#define BFPT_DWORD1_ADDRESS_BYTES_4_ONLY	(0x2UL << 17)
-#define BFPT_DWORD1_DTR				BIT(19)
-#define BFPT_DWORD1_FAST_READ_1_2_2		BIT(20)
-#define BFPT_DWORD1_FAST_READ_1_4_4		BIT(21)
-#define BFPT_DWORD1_FAST_READ_1_1_4		BIT(22)
-
-/* 5th DWORD. */
-#define BFPT_DWORD5_FAST_READ_2_2_2		BIT(0)
-#define BFPT_DWORD5_FAST_READ_4_4_4		BIT(4)
-
-/* 11th DWORD. */
-#define BFPT_DWORD11_PAGE_SIZE_SHIFT		4
-#define BFPT_DWORD11_PAGE_SIZE_MASK		GENMASK(7, 4)
-
-/* 15th DWORD. */
-
-/*
- * (from JESD216 rev B)
- * Quad Enable Requirements (QER):
- * - 000b: Device does not have a QE bit. Device detects 1-1-4 and 1-4-4
- *         reads based on instruction. DQ3/HOLD# functions are hold during
- *         instruction phase.
- * - 001b: QE is bit 1 of status register 2. It is set via Write Status with
- *         two data bytes where bit 1 of the second byte is one.
- *         [...]
- *         Writing only one byte to the status register has the side-effect of
- *         clearing status register 2, including the QE bit. The 100b code is
- *         used if writing one byte to the status register does not modify
- *         status register 2.
- * - 010b: QE is bit 6 of status register 1. It is set via Write Status with
- *         one data byte where bit 6 is one.
- *         [...]
- * - 011b: QE is bit 7 of status register 2. It is set via Write status
- *         register 2 instruction 3Eh with one data byte where bit 7 is one.
- *         [...]
- *         The status register 2 is read using instruction 3Fh.
- * - 100b: QE is bit 1 of status register 2. It is set via Write Status with
- *         two data bytes where bit 1 of the second byte is one.
- *         [...]
- *         In contrast to the 001b code, writing one byte to the status
- *         register does not modify status register 2.
- * - 101b: QE is bit 1 of status register 2. Status register 1 is read using
- *         Read Status instruction 05h. Status register2 is read using
- *         instruction 35h. QE is set via Write Status instruction 01h with
- *         two data bytes where bit 1 of the second byte is one.
- *         [...]
- */
-#define BFPT_DWORD15_QER_MASK			GENMASK(22, 20)
-#define BFPT_DWORD15_QER_NONE			(0x0UL << 20) /* Micron */
-#define BFPT_DWORD15_QER_SR2_BIT1_BUGGY		(0x1UL << 20)
-#define BFPT_DWORD15_QER_SR1_BIT6		(0x2UL << 20) /* Macronix */
-#define BFPT_DWORD15_QER_SR2_BIT7		(0x3UL << 20)
-#define BFPT_DWORD15_QER_SR2_BIT1_NO_RD		(0x4UL << 20)
-#define BFPT_DWORD15_QER_SR2_BIT1		(0x5UL << 20) /* Spansion */
-
-struct sfdp_bfpt {
-	u32	dwords[BFPT_DWORD_MAX];
-};
-
-/**
- * struct spi_nor_fixups - SPI NOR fixup hooks
- * @default_init: called after default flash parameters init. Used to tweak
- *                flash parameters when information provided by the flash_info
- *                table is incomplete or wrong.
- * @post_bfpt: called after the BFPT table has been parsed
- * @post_sfdp: called after SFDP has been parsed (is also called for SPI NORs
- *             that do not support RDSFDP). Typically used to tweak various
- *             parameters that could not be extracted by other means (i.e.
- *             when information provided by the SFDP/flash_info tables are
- *             incomplete or wrong).
- *
- * Those hooks can be used to tweak the SPI NOR configuration when the SFDP
- * table is broken or not available.
- */
-struct spi_nor_fixups {
-	void (*default_init)(struct spi_nor *nor);
-	int (*post_bfpt)(struct spi_nor *nor,
-			 const struct sfdp_parameter_header *bfpt_header,
-			 const struct sfdp_bfpt *bfpt,
-			 struct spi_nor_flash_parameter *params);
-	void (*post_sfdp)(struct spi_nor *nor);
-};
-
-struct flash_info {
-	char		*name;
-
-	/*
-	 * This array stores the ID bytes.
-	 * The first three bytes are the JEDIC ID.
-	 * JEDEC ID zero means "no ID" (mostly older chips).
-	 */
-	u8		id[SPI_NOR_MAX_ID_LEN];
-	u8		id_len;
-
-	/* The size listed here is what works with SPINOR_OP_SE, which isn't
-	 * necessarily called a "sector" by the vendor.
-	 */
-	unsigned	sector_size;
-	u16		n_sectors;
-
-	u16		page_size;
-	u16		addr_width;
-
-	u32		flags;
-#define SECT_4K			BIT(0)	/* SPINOR_OP_BE_4K works uniformly */
-#define SPI_NOR_NO_ERASE	BIT(1)	/* No erase command needed */
-#define SST_WRITE		BIT(2)	/* use SST byte programming */
-#define SPI_NOR_NO_FR		BIT(3)	/* Can't do fastread */
-#define SECT_4K_PMC		BIT(4)	/* SPINOR_OP_BE_4K_PMC works uniformly */
-#define SPI_NOR_DUAL_READ	BIT(5)	/* Flash supports Dual Read */
-#define SPI_NOR_QUAD_READ	BIT(6)	/* Flash supports Quad Read */
-#define USE_FSR			BIT(7)	/* use flag status register */
-#define SPI_NOR_HAS_LOCK	BIT(8)	/* Flash supports lock/unlock via SR */
-#define SPI_NOR_HAS_TB		BIT(9)	/*
-					 * Flash SR has Top/Bottom (TB) protect
-					 * bit. Must be used with
-					 * SPI_NOR_HAS_LOCK.
-					 */
-#define SPI_NOR_XSR_RDY		BIT(10)	/*
-					 * S3AN flashes have specific opcode to
-					 * read the status register.
-					 * Flags SPI_NOR_XSR_RDY and SPI_S3AN
-					 * use the same bit as one implies the
-					 * other, but we will get rid of
-					 * SPI_S3AN soon.
-					 */
-#define	SPI_S3AN		BIT(10)	/*
-					 * Xilinx Spartan 3AN In-System Flash
-					 * (MFR cannot be used for probing
-					 * because it has the same value as
-					 * ATMEL flashes)
-					 */
-#define SPI_NOR_4B_OPCODES	BIT(11)	/*
-					 * Use dedicated 4byte address op codes
-					 * to support memory size above 128Mib.
-					 */
-#define NO_CHIP_ERASE		BIT(12) /* Chip does not support chip erase */
-#define SPI_NOR_SKIP_SFDP	BIT(13)	/* Skip parsing of SFDP tables */
-#define USE_CLSR		BIT(14)	/* use CLSR command */
-#define SPI_NOR_OCTAL_READ	BIT(15)	/* Flash supports Octal Read */
-#define SPI_NOR_TB_SR_BIT6	BIT(16)	/*
-					 * Top/Bottom (TB) is bit 6 of
-					 * status register. Must be used with
-					 * SPI_NOR_HAS_TB.
-					 */
-
-	/* Part specific fixup hooks. */
-	const struct spi_nor_fixups *fixups;
-};
-
-#define JEDEC_MFR(info)	((info)->id[0])
-
-/**
- * spi_nor_spimem_xfer_data() - helper function to read/write data to
- *                              flash's memory region
- * @nor:        pointer to 'struct spi_nor'
- * @op:         pointer to 'struct spi_mem_op' template for transfer
- *
- * Return: number of bytes transferred on success, -errno otherwise
- */
-static ssize_t spi_nor_spimem_xfer_data(struct spi_nor *nor,
-					struct spi_mem_op *op)
-{
-	bool usebouncebuf = false;
-	void *rdbuf = NULL;
-	const void *buf;
-	int ret;
-
-	if (op->data.dir == SPI_MEM_DATA_IN)
-		buf = op->data.buf.in;
-	else
-		buf = op->data.buf.out;
-
-	if (object_is_on_stack(buf) || !virt_addr_valid(buf))
-		usebouncebuf = true;
-
-	if (usebouncebuf) {
-		if (op->data.nbytes > nor->bouncebuf_size)
-			op->data.nbytes = nor->bouncebuf_size;
-
-		if (op->data.dir == SPI_MEM_DATA_IN) {
-			rdbuf = op->data.buf.in;
-			op->data.buf.in = nor->bouncebuf;
-		} else {
-			op->data.buf.out = nor->bouncebuf;
-			memcpy(nor->bouncebuf, buf,
-			       op->data.nbytes);
-		}
-	}
-
-	ret = spi_mem_adjust_op_size(nor->spimem, op);
-	if (ret)
-		return ret;
-
-	ret = spi_mem_exec_op(nor->spimem, op);
-	if (ret)
-		return ret;
-
-	if (usebouncebuf && op->data.dir == SPI_MEM_DATA_IN)
-		memcpy(rdbuf, nor->bouncebuf, op->data.nbytes);
-
-	return op->data.nbytes;
-}
-
-/**
- * spi_nor_spimem_read_data() - read data from flash's memory region via
- *                              spi-mem
- * @nor:        pointer to 'struct spi_nor'
- * @from:       offset to read from
- * @len:        number of bytes to read
- * @buf:        pointer to dst buffer
- *
- * Return: number of bytes read successfully, -errno otherwise
- */
-static ssize_t spi_nor_spimem_read_data(struct spi_nor *nor, loff_t from,
-					size_t len, u8 *buf)
-{
-	struct spi_mem_op op =
-		SPI_MEM_OP(SPI_MEM_OP_CMD(nor->read_opcode, 1),
-			   SPI_MEM_OP_ADDR(nor->addr_width, from, 1),
-			   SPI_MEM_OP_DUMMY(nor->read_dummy, 1),
-			   SPI_MEM_OP_DATA_IN(len, buf, 1));
-
-	/* get transfer protocols. */
-	op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(nor->read_proto);
-	op.addr.buswidth = spi_nor_get_protocol_addr_nbits(nor->read_proto);
-	op.dummy.buswidth = op.addr.buswidth;
-	op.data.buswidth = spi_nor_get_protocol_data_nbits(nor->read_proto);
-
-	/* convert the dummy cycles to the number of bytes */
-	op.dummy.nbytes = (nor->read_dummy * op.dummy.buswidth) / 8;
-
-	return spi_nor_spimem_xfer_data(nor, &op);
-}
-
-/**
- * spi_nor_read_data() - read data from flash memory
- * @nor:        pointer to 'struct spi_nor'
- * @from:       offset to read from
- * @len:        number of bytes to read
- * @buf:        pointer to dst buffer
- *
- * Return: number of bytes read successfully, -errno otherwise
- */
-static ssize_t spi_nor_read_data(struct spi_nor *nor, loff_t from, size_t len,
-				 u8 *buf)
-{
-	if (nor->spimem)
-		return spi_nor_spimem_read_data(nor, from, len, buf);
-
-	return nor->controller_ops->read(nor, from, len, buf);
-}
-
-/**
- * spi_nor_spimem_write_data() - write data to flash memory via
- *                               spi-mem
- * @nor:        pointer to 'struct spi_nor'
- * @to:         offset to write to
- * @len:        number of bytes to write
- * @buf:        pointer to src buffer
- *
- * Return: number of bytes written successfully, -errno otherwise
- */
-static ssize_t spi_nor_spimem_write_data(struct spi_nor *nor, loff_t to,
-					 size_t len, const u8 *buf)
-{
-	struct spi_mem_op op =
-		SPI_MEM_OP(SPI_MEM_OP_CMD(nor->program_opcode, 1),
-			   SPI_MEM_OP_ADDR(nor->addr_width, to, 1),
-			   SPI_MEM_OP_NO_DUMMY,
-			   SPI_MEM_OP_DATA_OUT(len, buf, 1));
-
-	op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(nor->write_proto);
-	op.addr.buswidth = spi_nor_get_protocol_addr_nbits(nor->write_proto);
-	op.data.buswidth = spi_nor_get_protocol_data_nbits(nor->write_proto);
-
-	if (nor->program_opcode == SPINOR_OP_AAI_WP && nor->sst_write_second)
-		op.addr.nbytes = 0;
-
-	return spi_nor_spimem_xfer_data(nor, &op);
-}
-
-/**
- * spi_nor_write_data() - write data to flash memory
- * @nor:        pointer to 'struct spi_nor'
- * @to:         offset to write to
- * @len:        number of bytes to write
- * @buf:        pointer to src buffer
- *
- * Return: number of bytes written successfully, -errno otherwise
- */
-static ssize_t spi_nor_write_data(struct spi_nor *nor, loff_t to, size_t len,
-				  const u8 *buf)
-{
-	if (nor->spimem)
-		return spi_nor_spimem_write_data(nor, to, len, buf);
-
-	return nor->controller_ops->write(nor, to, len, buf);
-}
-
-/**
- * spi_nor_write_enable() - Set write enable latch with Write Enable command.
- * @nor:	pointer to 'struct spi_nor'.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_write_enable(struct spi_nor *nor)
-{
-	int ret;
-
-	if (nor->spimem) {
-		struct spi_mem_op op =
-			SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WREN, 1),
-				   SPI_MEM_OP_NO_ADDR,
-				   SPI_MEM_OP_NO_DUMMY,
-				   SPI_MEM_OP_NO_DATA);
-
-		ret = spi_mem_exec_op(nor->spimem, &op);
-	} else {
-		ret = nor->controller_ops->write_reg(nor, SPINOR_OP_WREN,
-						     NULL, 0);
-	}
-
-	if (ret)
-		dev_dbg(nor->dev, "error %d on Write Enable\n", ret);
-
-	return ret;
-}
-
-/**
- * spi_nor_write_disable() - Send Write Disable instruction to the chip.
- * @nor:	pointer to 'struct spi_nor'.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_write_disable(struct spi_nor *nor)
-{
-	int ret;
-
-	if (nor->spimem) {
-		struct spi_mem_op op =
-			SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRDI, 1),
-				   SPI_MEM_OP_NO_ADDR,
-				   SPI_MEM_OP_NO_DUMMY,
-				   SPI_MEM_OP_NO_DATA);
-
-		ret = spi_mem_exec_op(nor->spimem, &op);
-	} else {
-		ret = nor->controller_ops->write_reg(nor, SPINOR_OP_WRDI,
-						     NULL, 0);
-	}
-
-	if (ret)
-		dev_dbg(nor->dev, "error %d on Write Disable\n", ret);
-
-	return ret;
-}
-
-/**
- * spi_nor_read_sr() - Read the Status Register.
- * @nor:	pointer to 'struct spi_nor'.
- * @sr:		pointer to a DMA-able buffer where the value of the
- *              Status Register will be written.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_read_sr(struct spi_nor *nor, u8 *sr)
-{
-	int ret;
-
-	if (nor->spimem) {
-		struct spi_mem_op op =
-			SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDSR, 1),
-				   SPI_MEM_OP_NO_ADDR,
-				   SPI_MEM_OP_NO_DUMMY,
-				   SPI_MEM_OP_DATA_IN(1, sr, 1));
-
-		ret = spi_mem_exec_op(nor->spimem, &op);
-	} else {
-		ret = nor->controller_ops->read_reg(nor, SPINOR_OP_RDSR,
-						    sr, 1);
-	}
-
-	if (ret)
-		dev_dbg(nor->dev, "error %d reading SR\n", ret);
-
-	return ret;
-}
-
-/**
- * spi_nor_read_fsr() - Read the Flag Status Register.
- * @nor:	pointer to 'struct spi_nor'
- * @fsr:	pointer to a DMA-able buffer where the value of the
- *              Flag Status Register will be written.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_read_fsr(struct spi_nor *nor, u8 *fsr)
-{
-	int ret;
-
-	if (nor->spimem) {
-		struct spi_mem_op op =
-			SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDFSR, 1),
-				   SPI_MEM_OP_NO_ADDR,
-				   SPI_MEM_OP_NO_DUMMY,
-				   SPI_MEM_OP_DATA_IN(1, fsr, 1));
-
-		ret = spi_mem_exec_op(nor->spimem, &op);
-	} else {
-		ret = nor->controller_ops->read_reg(nor, SPINOR_OP_RDFSR,
-						    fsr, 1);
-	}
-
-	if (ret)
-		dev_dbg(nor->dev, "error %d reading FSR\n", ret);
-
-	return ret;
-}
-
-/**
- * spi_nor_read_cr() - Read the Configuration Register using the
- * SPINOR_OP_RDCR (35h) command.
- * @nor:	pointer to 'struct spi_nor'
- * @cr:		pointer to a DMA-able buffer where the value of the
- *              Configuration Register will be written.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_read_cr(struct spi_nor *nor, u8 *cr)
-{
-	int ret;
-
-	if (nor->spimem) {
-		struct spi_mem_op op =
-			SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDCR, 1),
-				   SPI_MEM_OP_NO_ADDR,
-				   SPI_MEM_OP_NO_DUMMY,
-				   SPI_MEM_OP_DATA_IN(1, cr, 1));
-
-		ret = spi_mem_exec_op(nor->spimem, &op);
-	} else {
-		ret = nor->controller_ops->read_reg(nor, SPINOR_OP_RDCR, cr, 1);
-	}
-
-	if (ret)
-		dev_dbg(nor->dev, "error %d reading CR\n", ret);
-
-	return ret;
-}
-
-/**
- * macronix_set_4byte() - Set 4-byte address mode for Macronix flashes.
- * @nor:	pointer to 'struct spi_nor'.
- * @enable:	true to enter the 4-byte address mode, false to exit the 4-byte
- *		address mode.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int macronix_set_4byte(struct spi_nor *nor, bool enable)
-{
-	int ret;
-
-	if (nor->spimem) {
-		struct spi_mem_op op =
-			SPI_MEM_OP(SPI_MEM_OP_CMD(enable ?
-						  SPINOR_OP_EN4B :
-						  SPINOR_OP_EX4B,
-						  1),
-				  SPI_MEM_OP_NO_ADDR,
-				  SPI_MEM_OP_NO_DUMMY,
-				  SPI_MEM_OP_NO_DATA);
-
-		ret = spi_mem_exec_op(nor->spimem, &op);
-	} else {
-		ret = nor->controller_ops->write_reg(nor,
-						     enable ? SPINOR_OP_EN4B :
-							      SPINOR_OP_EX4B,
-						     NULL, 0);
-	}
-
-	if (ret)
-		dev_dbg(nor->dev, "error %d setting 4-byte mode\n", ret);
-
-	return ret;
-}
-
-/**
- * st_micron_set_4byte() - Set 4-byte address mode for ST and Micron flashes.
- * @nor:	pointer to 'struct spi_nor'.
- * @enable:	true to enter the 4-byte address mode, false to exit the 4-byte
- *		address mode.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int st_micron_set_4byte(struct spi_nor *nor, bool enable)
-{
-	int ret;
-
-	ret = spi_nor_write_enable(nor);
-	if (ret)
-		return ret;
-
-	ret = macronix_set_4byte(nor, enable);
-	if (ret)
-		return ret;
-
-	return spi_nor_write_disable(nor);
-}
-
-/**
- * spansion_set_4byte() - Set 4-byte address mode for Spansion flashes.
- * @nor:	pointer to 'struct spi_nor'.
- * @enable:	true to enter the 4-byte address mode, false to exit the 4-byte
- *		address mode.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spansion_set_4byte(struct spi_nor *nor, bool enable)
-{
-	int ret;
-
-	nor->bouncebuf[0] = enable << 7;
-
-	if (nor->spimem) {
-		struct spi_mem_op op =
-			SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_BRWR, 1),
-				   SPI_MEM_OP_NO_ADDR,
-				   SPI_MEM_OP_NO_DUMMY,
-				   SPI_MEM_OP_DATA_OUT(1, nor->bouncebuf, 1));
-
-		ret = spi_mem_exec_op(nor->spimem, &op);
-	} else {
-		ret = nor->controller_ops->write_reg(nor, SPINOR_OP_BRWR,
-						     nor->bouncebuf, 1);
-	}
-
-	if (ret)
-		dev_dbg(nor->dev, "error %d setting 4-byte mode\n", ret);
-
-	return ret;
-}
-
-/**
- * spi_nor_write_ear() - Write Extended Address Register.
- * @nor:	pointer to 'struct spi_nor'.
- * @ear:	value to write to the Extended Address Register.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_write_ear(struct spi_nor *nor, u8 ear)
-{
-	int ret;
-
-	nor->bouncebuf[0] = ear;
-
-	if (nor->spimem) {
-		struct spi_mem_op op =
-			SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WREAR, 1),
-				   SPI_MEM_OP_NO_ADDR,
-				   SPI_MEM_OP_NO_DUMMY,
-				   SPI_MEM_OP_DATA_OUT(1, nor->bouncebuf, 1));
-
-		ret = spi_mem_exec_op(nor->spimem, &op);
-	} else {
-		ret = nor->controller_ops->write_reg(nor, SPINOR_OP_WREAR,
-						     nor->bouncebuf, 1);
-	}
-
-	if (ret)
-		dev_dbg(nor->dev, "error %d writing EAR\n", ret);
-
-	return ret;
-}
-
-/**
- * winbond_set_4byte() - Set 4-byte address mode for Winbond flashes.
- * @nor:	pointer to 'struct spi_nor'.
- * @enable:	true to enter the 4-byte address mode, false to exit the 4-byte
- *		address mode.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int winbond_set_4byte(struct spi_nor *nor, bool enable)
-{
-	int ret;
-
-	ret = macronix_set_4byte(nor, enable);
-	if (ret || enable)
-		return ret;
-
-	/*
-	 * On Winbond W25Q256FV, leaving 4byte mode causes the Extended Address
-	 * Register to be set to 1, so all 3-byte-address reads come from the
-	 * second 16M. We must clear the register to enable normal behavior.
-	 */
-	ret = spi_nor_write_enable(nor);
-	if (ret)
-		return ret;
-
-	ret = spi_nor_write_ear(nor, 0);
-	if (ret)
-		return ret;
-
-	return spi_nor_write_disable(nor);
-}
-
-/**
- * spi_nor_xread_sr() - Read the Status Register on S3AN flashes.
- * @nor:	pointer to 'struct spi_nor'.
- * @sr:		pointer to a DMA-able buffer where the value of the
- *              Status Register will be written.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_xread_sr(struct spi_nor *nor, u8 *sr)
-{
-	int ret;
-
-	if (nor->spimem) {
-		struct spi_mem_op op =
-			SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_XRDSR, 1),
-				   SPI_MEM_OP_NO_ADDR,
-				   SPI_MEM_OP_NO_DUMMY,
-				   SPI_MEM_OP_DATA_IN(1, sr, 1));
-
-		ret = spi_mem_exec_op(nor->spimem, &op);
-	} else {
-		ret = nor->controller_ops->read_reg(nor, SPINOR_OP_XRDSR,
-						    sr, 1);
-	}
-
-	if (ret)
-		dev_dbg(nor->dev, "error %d reading XRDSR\n", ret);
-
-	return ret;
-}
-
-/**
- * s3an_sr_ready() - Query the Status Register of the S3AN flash to see if the
- * flash is ready for new commands.
- * @nor:	pointer to 'struct spi_nor'.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int s3an_sr_ready(struct spi_nor *nor)
-{
-	int ret;
-
-	ret = spi_nor_xread_sr(nor, nor->bouncebuf);
-	if (ret)
-		return ret;
-
-	return !!(nor->bouncebuf[0] & XSR_RDY);
-}
-
-/**
- * spi_nor_clear_sr() - Clear the Status Register.
- * @nor:	pointer to 'struct spi_nor'.
- */
-static void spi_nor_clear_sr(struct spi_nor *nor)
-{
-	int ret;
-
-	if (nor->spimem) {
-		struct spi_mem_op op =
-			SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_CLSR, 1),
-				   SPI_MEM_OP_NO_ADDR,
-				   SPI_MEM_OP_NO_DUMMY,
-				   SPI_MEM_OP_NO_DATA);
-
-		ret = spi_mem_exec_op(nor->spimem, &op);
-	} else {
-		ret = nor->controller_ops->write_reg(nor, SPINOR_OP_CLSR,
-						     NULL, 0);
-	}
-
-	if (ret)
-		dev_dbg(nor->dev, "error %d clearing SR\n", ret);
-}
-
-/**
- * spi_nor_sr_ready() - Query the Status Register to see if the flash is ready
- * for new commands.
- * @nor:	pointer to 'struct spi_nor'.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_sr_ready(struct spi_nor *nor)
-{
-	int ret = spi_nor_read_sr(nor, nor->bouncebuf);
-
-	if (ret)
-		return ret;
-
-	if (nor->flags & SNOR_F_USE_CLSR &&
-	    nor->bouncebuf[0] & (SR_E_ERR | SR_P_ERR)) {
-		if (nor->bouncebuf[0] & SR_E_ERR)
-			dev_err(nor->dev, "Erase Error occurred\n");
-		else
-			dev_err(nor->dev, "Programming Error occurred\n");
-
-		spi_nor_clear_sr(nor);
-		return -EIO;
-	}
-
-	return !(nor->bouncebuf[0] & SR_WIP);
-}
-
-/**
- * spi_nor_clear_fsr() - Clear the Flag Status Register.
- * @nor:	pointer to 'struct spi_nor'.
- */
-static void spi_nor_clear_fsr(struct spi_nor *nor)
-{
-	int ret;
-
-	if (nor->spimem) {
-		struct spi_mem_op op =
-			SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_CLFSR, 1),
-				   SPI_MEM_OP_NO_ADDR,
-				   SPI_MEM_OP_NO_DUMMY,
-				   SPI_MEM_OP_NO_DATA);
-
-		ret = spi_mem_exec_op(nor->spimem, &op);
-	} else {
-		ret = nor->controller_ops->write_reg(nor, SPINOR_OP_CLFSR,
-						     NULL, 0);
-	}
-
-	if (ret)
-		dev_dbg(nor->dev, "error %d clearing FSR\n", ret);
-}
-
-/**
- * spi_nor_fsr_ready() - Query the Flag Status Register to see if the flash is
- * ready for new commands.
- * @nor:	pointer to 'struct spi_nor'.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_fsr_ready(struct spi_nor *nor)
-{
-	int ret = spi_nor_read_fsr(nor, nor->bouncebuf);
-
-	if (ret)
-		return ret;
-
-	if (nor->bouncebuf[0] & (FSR_E_ERR | FSR_P_ERR)) {
-		if (nor->bouncebuf[0] & FSR_E_ERR)
-			dev_err(nor->dev, "Erase operation failed.\n");
-		else
-			dev_err(nor->dev, "Program operation failed.\n");
-
-		if (nor->bouncebuf[0] & FSR_PT_ERR)
-			dev_err(nor->dev,
-			"Attempted to modify a protected sector.\n");
-
-		spi_nor_clear_fsr(nor);
-		return -EIO;
-	}
-
-	return nor->bouncebuf[0] & FSR_READY;
-}
-
-/**
- * spi_nor_ready() - Query the flash to see if it is ready for new commands.
- * @nor:	pointer to 'struct spi_nor'.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_ready(struct spi_nor *nor)
-{
-	int sr, fsr;
-
-	if (nor->flags & SNOR_F_READY_XSR_RDY)
-		sr = s3an_sr_ready(nor);
-	else
-		sr = spi_nor_sr_ready(nor);
-	if (sr < 0)
-		return sr;
-	fsr = nor->flags & SNOR_F_USE_FSR ? spi_nor_fsr_ready(nor) : 1;
-	if (fsr < 0)
-		return fsr;
-	return sr && fsr;
-}
-
-/**
- * spi_nor_wait_till_ready_with_timeout() - Service routine to read the
- * Status Register until ready, or timeout occurs.
- * @nor:		pointer to "struct spi_nor".
- * @timeout_jiffies:	jiffies to wait until timeout.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_wait_till_ready_with_timeout(struct spi_nor *nor,
-						unsigned long timeout_jiffies)
-{
-	unsigned long deadline;
-	int timeout = 0, ret;
-
-	deadline = jiffies + timeout_jiffies;
-
-	while (!timeout) {
-		if (time_after_eq(jiffies, deadline))
-			timeout = 1;
-
-		ret = spi_nor_ready(nor);
-		if (ret < 0)
-			return ret;
-		if (ret)
-			return 0;
-
-		cond_resched();
-	}
-
-	dev_dbg(nor->dev, "flash operation timed out\n");
-
-	return -ETIMEDOUT;
-}
-
-/**
- * spi_nor_wait_till_ready() - Wait for a predefined amount of time for the
- * flash to be ready, or timeout occurs.
- * @nor:	pointer to "struct spi_nor".
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_wait_till_ready(struct spi_nor *nor)
-{
-	return spi_nor_wait_till_ready_with_timeout(nor,
-						    DEFAULT_READY_WAIT_JIFFIES);
-}
-
-/**
- * spi_nor_write_sr() - Write the Status Register.
- * @nor:	pointer to 'struct spi_nor'.
- * @sr:		pointer to DMA-able buffer to write to the Status Register.
- * @len:	number of bytes to write to the Status Register.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_write_sr(struct spi_nor *nor, const u8 *sr, size_t len)
-{
-	int ret;
-
-	ret = spi_nor_write_enable(nor);
-	if (ret)
-		return ret;
-
-	if (nor->spimem) {
-		struct spi_mem_op op =
-			SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRSR, 1),
-				   SPI_MEM_OP_NO_ADDR,
-				   SPI_MEM_OP_NO_DUMMY,
-				   SPI_MEM_OP_DATA_OUT(len, sr, 1));
-
-		ret = spi_mem_exec_op(nor->spimem, &op);
-	} else {
-		ret = nor->controller_ops->write_reg(nor, SPINOR_OP_WRSR,
-						     sr, len);
-	}
-
-	if (ret) {
-		dev_dbg(nor->dev, "error %d writing SR\n", ret);
-		return ret;
-	}
-
-	return spi_nor_wait_till_ready(nor);
-}
-
-/**
- * spi_nor_write_sr1_and_check() - Write one byte to the Status Register 1 and
- * ensure that the byte written match the received value.
- * @nor:	pointer to a 'struct spi_nor'.
- * @sr1:	byte value to be written to the Status Register.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_write_sr1_and_check(struct spi_nor *nor, u8 sr1)
-{
-	int ret;
-
-	nor->bouncebuf[0] = sr1;
-
-	ret = spi_nor_write_sr(nor, nor->bouncebuf, 1);
-	if (ret)
-		return ret;
-
-	ret = spi_nor_read_sr(nor, nor->bouncebuf);
-	if (ret)
-		return ret;
-
-	if (nor->bouncebuf[0] != sr1) {
-		dev_dbg(nor->dev, "SR1: read back test failed\n");
-		return -EIO;
-	}
-
-	return 0;
-}
-
-/**
- * spi_nor_write_16bit_sr_and_check() - Write the Status Register 1 and the
- * Status Register 2 in one shot. Ensure that the byte written in the Status
- * Register 1 match the received value, and that the 16-bit Write did not
- * affect what was already in the Status Register 2.
- * @nor:	pointer to a 'struct spi_nor'.
- * @sr1:	byte value to be written to the Status Register 1.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_write_16bit_sr_and_check(struct spi_nor *nor, u8 sr1)
-{
-	int ret;
-	u8 *sr_cr = nor->bouncebuf;
-	u8 cr_written;
-
-	/* Make sure we don't overwrite the contents of Status Register 2. */
-	if (!(nor->flags & SNOR_F_NO_READ_CR)) {
-		ret = spi_nor_read_cr(nor, &sr_cr[1]);
-		if (ret)
-			return ret;
-	} else if (nor->params.quad_enable) {
-		/*
-		 * If the Status Register 2 Read command (35h) is not
-		 * supported, we should at least be sure we don't
-		 * change the value of the SR2 Quad Enable bit.
-		 *
-		 * We can safely assume that when the Quad Enable method is
-		 * set, the value of the QE bit is one, as a consequence of the
-		 * nor->params.quad_enable() call.
-		 *
-		 * We can safely assume that the Quad Enable bit is present in
-		 * the Status Register 2 at BIT(1). According to the JESD216
-		 * revB standard, BFPT DWORDS[15], bits 22:20, the 16-bit
-		 * Write Status (01h) command is available just for the cases
-		 * in which the QE bit is described in SR2 at BIT(1).
-		 */
-		sr_cr[1] = SR2_QUAD_EN_BIT1;
-	} else {
-		sr_cr[1] = 0;
-	}
-
-	sr_cr[0] = sr1;
-
-	ret = spi_nor_write_sr(nor, sr_cr, 2);
-	if (ret)
-		return ret;
-
-	if (nor->flags & SNOR_F_NO_READ_CR)
-		return 0;
-
-	cr_written = sr_cr[1];
-
-	ret = spi_nor_read_cr(nor, &sr_cr[1]);
-	if (ret)
-		return ret;
-
-	if (cr_written != sr_cr[1]) {
-		dev_dbg(nor->dev, "CR: read back test failed\n");
-		return -EIO;
-	}
-
-	return 0;
-}
-
-/**
- * spi_nor_write_16bit_cr_and_check() - Write the Status Register 1 and the
- * Configuration Register in one shot. Ensure that the byte written in the
- * Configuration Register match the received value, and that the 16-bit Write
- * did not affect what was already in the Status Register 1.
- * @nor:	pointer to a 'struct spi_nor'.
- * @cr:		byte value to be written to the Configuration Register.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_write_16bit_cr_and_check(struct spi_nor *nor, u8 cr)
-{
-	int ret;
-	u8 *sr_cr = nor->bouncebuf;
-	u8 sr_written;
-
-	/* Keep the current value of the Status Register 1. */
-	ret = spi_nor_read_sr(nor, sr_cr);
-	if (ret)
-		return ret;
-
-	sr_cr[1] = cr;
-
-	ret = spi_nor_write_sr(nor, sr_cr, 2);
-	if (ret)
-		return ret;
-
-	sr_written = sr_cr[0];
-
-	ret = spi_nor_read_sr(nor, sr_cr);
-	if (ret)
-		return ret;
-
-	if (sr_written != sr_cr[0]) {
-		dev_dbg(nor->dev, "SR: Read back test failed\n");
-		return -EIO;
-	}
-
-	if (nor->flags & SNOR_F_NO_READ_CR)
-		return 0;
-
-	ret = spi_nor_read_cr(nor, &sr_cr[1]);
-	if (ret)
-		return ret;
-
-	if (cr != sr_cr[1]) {
-		dev_dbg(nor->dev, "CR: read back test failed\n");
-		return -EIO;
-	}
-
-	return 0;
-}
-
-/**
- * spi_nor_write_sr_and_check() - Write the Status Register 1 and ensure that
- * the byte written match the received value without affecting other bits in the
- * Status Register 1 and 2.
- * @nor:	pointer to a 'struct spi_nor'.
- * @sr1:	byte value to be written to the Status Register.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_write_sr_and_check(struct spi_nor *nor, u8 sr1)
-{
-	if (nor->flags & SNOR_F_HAS_16BIT_SR)
-		return spi_nor_write_16bit_sr_and_check(nor, sr1);
-
-	return spi_nor_write_sr1_and_check(nor, sr1);
-}
-
-/**
- * spi_nor_write_sr2() - Write the Status Register 2 using the
- * SPINOR_OP_WRSR2 (3eh) command.
- * @nor:	pointer to 'struct spi_nor'.
- * @sr2:	pointer to DMA-able buffer to write to the Status Register 2.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_write_sr2(struct spi_nor *nor, const u8 *sr2)
-{
-	int ret;
-
-	ret = spi_nor_write_enable(nor);
-	if (ret)
-		return ret;
-
-	if (nor->spimem) {
-		struct spi_mem_op op =
-			SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRSR2, 1),
-				   SPI_MEM_OP_NO_ADDR,
-				   SPI_MEM_OP_NO_DUMMY,
-				   SPI_MEM_OP_DATA_OUT(1, sr2, 1));
-
-		ret = spi_mem_exec_op(nor->spimem, &op);
-	} else {
-		ret = nor->controller_ops->write_reg(nor, SPINOR_OP_WRSR2,
-						     sr2, 1);
-	}
-
-	if (ret) {
-		dev_dbg(nor->dev, "error %d writing SR2\n", ret);
-		return ret;
-	}
-
-	return spi_nor_wait_till_ready(nor);
-}
-
-/**
- * spi_nor_read_sr2() - Read the Status Register 2 using the
- * SPINOR_OP_RDSR2 (3fh) command.
- * @nor:	pointer to 'struct spi_nor'.
- * @sr2:	pointer to DMA-able buffer where the value of the
- *		Status Register 2 will be written.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_read_sr2(struct spi_nor *nor, u8 *sr2)
-{
-	int ret;
-
-	if (nor->spimem) {
-		struct spi_mem_op op =
-			SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDSR2, 1),
-				   SPI_MEM_OP_NO_ADDR,
-				   SPI_MEM_OP_NO_DUMMY,
-				   SPI_MEM_OP_DATA_IN(1, sr2, 1));
-
-		ret = spi_mem_exec_op(nor->spimem, &op);
-	} else {
-		ret = nor->controller_ops->read_reg(nor, SPINOR_OP_RDSR2,
-						    sr2, 1);
-	}
-
-	if (ret)
-		dev_dbg(nor->dev, "error %d reading SR2\n", ret);
-
-	return ret;
-}
-
-/**
- * spi_nor_erase_chip() - Erase the entire flash memory.
- * @nor:	pointer to 'struct spi_nor'.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_erase_chip(struct spi_nor *nor)
-{
-	int ret;
-
-	dev_dbg(nor->dev, " %lldKiB\n", (long long)(nor->mtd.size >> 10));
-
-	if (nor->spimem) {
-		struct spi_mem_op op =
-			SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_CHIP_ERASE, 1),
-				   SPI_MEM_OP_NO_ADDR,
-				   SPI_MEM_OP_NO_DUMMY,
-				   SPI_MEM_OP_NO_DATA);
-
-		ret = spi_mem_exec_op(nor->spimem, &op);
-	} else {
-		ret = nor->controller_ops->write_reg(nor, SPINOR_OP_CHIP_ERASE,
-						     NULL, 0);
-	}
-
-	if (ret)
-		dev_dbg(nor->dev, "error %d erasing chip\n", ret);
-
-	return ret;
-}
-
-static struct spi_nor *mtd_to_spi_nor(struct mtd_info *mtd)
-{
-	return mtd->priv;
-}
-
-static u8 spi_nor_convert_opcode(u8 opcode, const u8 table[][2], size_t size)
-{
-	size_t i;
-
-	for (i = 0; i < size; i++)
-		if (table[i][0] == opcode)
-			return table[i][1];
-
-	/* No conversion found, keep input op code. */
-	return opcode;
-}
-
-static u8 spi_nor_convert_3to4_read(u8 opcode)
-{
-	static const u8 spi_nor_3to4_read[][2] = {
-		{ SPINOR_OP_READ,	SPINOR_OP_READ_4B },
-		{ SPINOR_OP_READ_FAST,	SPINOR_OP_READ_FAST_4B },
-		{ SPINOR_OP_READ_1_1_2,	SPINOR_OP_READ_1_1_2_4B },
-		{ SPINOR_OP_READ_1_2_2,	SPINOR_OP_READ_1_2_2_4B },
-		{ SPINOR_OP_READ_1_1_4,	SPINOR_OP_READ_1_1_4_4B },
-		{ SPINOR_OP_READ_1_4_4,	SPINOR_OP_READ_1_4_4_4B },
-		{ SPINOR_OP_READ_1_1_8,	SPINOR_OP_READ_1_1_8_4B },
-		{ SPINOR_OP_READ_1_8_8,	SPINOR_OP_READ_1_8_8_4B },
-
-		{ SPINOR_OP_READ_1_1_1_DTR,	SPINOR_OP_READ_1_1_1_DTR_4B },
-		{ SPINOR_OP_READ_1_2_2_DTR,	SPINOR_OP_READ_1_2_2_DTR_4B },
-		{ SPINOR_OP_READ_1_4_4_DTR,	SPINOR_OP_READ_1_4_4_DTR_4B },
-	};
-
-	return spi_nor_convert_opcode(opcode, spi_nor_3to4_read,
-				      ARRAY_SIZE(spi_nor_3to4_read));
-}
-
-static u8 spi_nor_convert_3to4_program(u8 opcode)
-{
-	static const u8 spi_nor_3to4_program[][2] = {
-		{ SPINOR_OP_PP,		SPINOR_OP_PP_4B },
-		{ SPINOR_OP_PP_1_1_4,	SPINOR_OP_PP_1_1_4_4B },
-		{ SPINOR_OP_PP_1_4_4,	SPINOR_OP_PP_1_4_4_4B },
-		{ SPINOR_OP_PP_1_1_8,	SPINOR_OP_PP_1_1_8_4B },
-		{ SPINOR_OP_PP_1_8_8,	SPINOR_OP_PP_1_8_8_4B },
-	};
-
-	return spi_nor_convert_opcode(opcode, spi_nor_3to4_program,
-				      ARRAY_SIZE(spi_nor_3to4_program));
-}
-
-static u8 spi_nor_convert_3to4_erase(u8 opcode)
-{
-	static const u8 spi_nor_3to4_erase[][2] = {
-		{ SPINOR_OP_BE_4K,	SPINOR_OP_BE_4K_4B },
-		{ SPINOR_OP_BE_32K,	SPINOR_OP_BE_32K_4B },
-		{ SPINOR_OP_SE,		SPINOR_OP_SE_4B },
-	};
-
-	return spi_nor_convert_opcode(opcode, spi_nor_3to4_erase,
-				      ARRAY_SIZE(spi_nor_3to4_erase));
-}
-
-static void spi_nor_set_4byte_opcodes(struct spi_nor *nor)
-{
-	nor->read_opcode = spi_nor_convert_3to4_read(nor->read_opcode);
-	nor->program_opcode = spi_nor_convert_3to4_program(nor->program_opcode);
-	nor->erase_opcode = spi_nor_convert_3to4_erase(nor->erase_opcode);
-
-	if (!spi_nor_has_uniform_erase(nor)) {
-		struct spi_nor_erase_map *map = &nor->params.erase_map;
-		struct spi_nor_erase_type *erase;
-		int i;
-
-		for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) {
-			erase = &map->erase_type[i];
-			erase->opcode =
-				spi_nor_convert_3to4_erase(erase->opcode);
-		}
-	}
-}
-
-static int spi_nor_lock_and_prep(struct spi_nor *nor)
-{
-	int ret = 0;
-
-	mutex_lock(&nor->lock);
-
-	if (nor->controller_ops &&  nor->controller_ops->prepare) {
-		ret = nor->controller_ops->prepare(nor);
-		if (ret) {
-			mutex_unlock(&nor->lock);
-			return ret;
-		}
-	}
-	return ret;
-}
-
-static void spi_nor_unlock_and_unprep(struct spi_nor *nor)
-{
-	if (nor->controller_ops && nor->controller_ops->unprepare)
-		nor->controller_ops->unprepare(nor);
-	mutex_unlock(&nor->lock);
-}
-
-/*
- * This code converts an address to the Default Address Mode, that has non
- * power of two page sizes. We must support this mode because it is the default
- * mode supported by Xilinx tools, it can access the whole flash area and
- * changing over to the Power-of-two mode is irreversible and corrupts the
- * original data.
- * Addr can safely be unsigned int, the biggest S3AN device is smaller than
- * 4 MiB.
- */
-static u32 s3an_convert_addr(struct spi_nor *nor, u32 addr)
-{
-	u32 offset, page;
-
-	offset = addr % nor->page_size;
-	page = addr / nor->page_size;
-	page <<= (nor->page_size > 512) ? 10 : 9;
-
-	return page | offset;
-}
-
-static u32 spi_nor_convert_addr(struct spi_nor *nor, loff_t addr)
-{
-	if (!nor->params.convert_addr)
-		return addr;
-
-	return nor->params.convert_addr(nor, addr);
-}
-
-/*
- * Initiate the erasure of a single sector
- */
-static int spi_nor_erase_sector(struct spi_nor *nor, u32 addr)
-{
-	int i;
-
-	addr = spi_nor_convert_addr(nor, addr);
-
-	if (nor->spimem) {
-		struct spi_mem_op op =
-			SPI_MEM_OP(SPI_MEM_OP_CMD(nor->erase_opcode, 1),
-				   SPI_MEM_OP_ADDR(nor->addr_width, addr, 1),
-				   SPI_MEM_OP_NO_DUMMY,
-				   SPI_MEM_OP_NO_DATA);
-
-		return spi_mem_exec_op(nor->spimem, &op);
-	} else if (nor->controller_ops->erase) {
-		return nor->controller_ops->erase(nor, addr);
-	}
-
-	/*
-	 * Default implementation, if driver doesn't have a specialized HW
-	 * control
-	 */
-	for (i = nor->addr_width - 1; i >= 0; i--) {
-		nor->bouncebuf[i] = addr & 0xff;
-		addr >>= 8;
-	}
-
-	return nor->controller_ops->write_reg(nor, nor->erase_opcode,
-					      nor->bouncebuf, nor->addr_width);
-}
-
-/**
- * spi_nor_div_by_erase_size() - calculate remainder and update new dividend
- * @erase:	pointer to a structure that describes a SPI NOR erase type
- * @dividend:	dividend value
- * @remainder:	pointer to u32 remainder (will be updated)
- *
- * Return: the result of the division
- */
-static u64 spi_nor_div_by_erase_size(const struct spi_nor_erase_type *erase,
-				     u64 dividend, u32 *remainder)
-{
-	/* JEDEC JESD216B Standard imposes erase sizes to be power of 2. */
-	*remainder = (u32)dividend & erase->size_mask;
-	return dividend >> erase->size_shift;
-}
-
-/**
- * spi_nor_find_best_erase_type() - find the best erase type for the given
- *				    offset in the serial flash memory and the
- *				    number of bytes to erase. The region in
- *				    which the address fits is expected to be
- *				    provided.
- * @map:	the erase map of the SPI NOR
- * @region:	pointer to a structure that describes a SPI NOR erase region
- * @addr:	offset in the serial flash memory
- * @len:	number of bytes to erase
- *
- * Return: a pointer to the best fitted erase type, NULL otherwise.
- */
-static const struct spi_nor_erase_type *
-spi_nor_find_best_erase_type(const struct spi_nor_erase_map *map,
-			     const struct spi_nor_erase_region *region,
-			     u64 addr, u32 len)
-{
-	const struct spi_nor_erase_type *erase;
-	u32 rem;
-	int i;
-	u8 erase_mask = region->offset & SNOR_ERASE_TYPE_MASK;
-
-	/*
-	 * Erase types are ordered by size, with the smallest erase type at
-	 * index 0.
-	 */
-	for (i = SNOR_ERASE_TYPE_MAX - 1; i >= 0; i--) {
-		/* Does the erase region support the tested erase type? */
-		if (!(erase_mask & BIT(i)))
-			continue;
-
-		erase = &map->erase_type[i];
-
-		/* Don't erase more than what the user has asked for. */
-		if (erase->size > len)
-			continue;
-
-		/* Alignment is not mandatory for overlaid regions */
-		if (region->offset & SNOR_OVERLAID_REGION)
-			return erase;
-
-		spi_nor_div_by_erase_size(erase, addr, &rem);
-		if (rem)
-			continue;
-		else
-			return erase;
-	}
-
-	return NULL;
-}
-
-/**
- * spi_nor_region_next() - get the next spi nor region
- * @region:	pointer to a structure that describes a SPI NOR erase region
- *
- * Return: the next spi nor region or NULL if last region.
- */
-static struct spi_nor_erase_region *
-spi_nor_region_next(struct spi_nor_erase_region *region)
-{
-	if (spi_nor_region_is_last(region))
-		return NULL;
-	region++;
-	return region;
-}
-
-/**
- * spi_nor_find_erase_region() - find the region of the serial flash memory in
- *				 which the offset fits
- * @map:	the erase map of the SPI NOR
- * @addr:	offset in the serial flash memory
- *
- * Return: a pointer to the spi_nor_erase_region struct, ERR_PTR(-errno)
- *	   otherwise.
- */
-static struct spi_nor_erase_region *
-spi_nor_find_erase_region(const struct spi_nor_erase_map *map, u64 addr)
-{
-	struct spi_nor_erase_region *region = map->regions;
-	u64 region_start = region->offset & ~SNOR_ERASE_FLAGS_MASK;
-	u64 region_end = region_start + region->size;
-
-	while (addr < region_start || addr >= region_end) {
-		region = spi_nor_region_next(region);
-		if (!region)
-			return ERR_PTR(-EINVAL);
-
-		region_start = region->offset & ~SNOR_ERASE_FLAGS_MASK;
-		region_end = region_start + region->size;
-	}
-
-	return region;
-}
-
-/**
- * spi_nor_init_erase_cmd() - initialize an erase command
- * @region:	pointer to a structure that describes a SPI NOR erase region
- * @erase:	pointer to a structure that describes a SPI NOR erase type
- *
- * Return: the pointer to the allocated erase command, ERR_PTR(-errno)
- *	   otherwise.
- */
-static struct spi_nor_erase_command *
-spi_nor_init_erase_cmd(const struct spi_nor_erase_region *region,
-		       const struct spi_nor_erase_type *erase)
-{
-	struct spi_nor_erase_command *cmd;
-
-	cmd = kmalloc(sizeof(*cmd), GFP_KERNEL);
-	if (!cmd)
-		return ERR_PTR(-ENOMEM);
-
-	INIT_LIST_HEAD(&cmd->list);
-	cmd->opcode = erase->opcode;
-	cmd->count = 1;
-
-	if (region->offset & SNOR_OVERLAID_REGION)
-		cmd->size = region->size;
-	else
-		cmd->size = erase->size;
-
-	return cmd;
-}
-
-/**
- * spi_nor_destroy_erase_cmd_list() - destroy erase command list
- * @erase_list:	list of erase commands
- */
-static void spi_nor_destroy_erase_cmd_list(struct list_head *erase_list)
-{
-	struct spi_nor_erase_command *cmd, *next;
-
-	list_for_each_entry_safe(cmd, next, erase_list, list) {
-		list_del(&cmd->list);
-		kfree(cmd);
-	}
-}
-
-/**
- * spi_nor_init_erase_cmd_list() - initialize erase command list
- * @nor:	pointer to a 'struct spi_nor'
- * @erase_list:	list of erase commands to be executed once we validate that the
- *		erase can be performed
- * @addr:	offset in the serial flash memory
- * @len:	number of bytes to erase
- *
- * Builds the list of best fitted erase commands and verifies if the erase can
- * be performed.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_init_erase_cmd_list(struct spi_nor *nor,
-				       struct list_head *erase_list,
-				       u64 addr, u32 len)
-{
-	const struct spi_nor_erase_map *map = &nor->params.erase_map;
-	const struct spi_nor_erase_type *erase, *prev_erase = NULL;
-	struct spi_nor_erase_region *region;
-	struct spi_nor_erase_command *cmd = NULL;
-	u64 region_end;
-	int ret = -EINVAL;
-
-	region = spi_nor_find_erase_region(map, addr);
-	if (IS_ERR(region))
-		return PTR_ERR(region);
-
-	region_end = spi_nor_region_end(region);
-
-	while (len) {
-		erase = spi_nor_find_best_erase_type(map, region, addr, len);
-		if (!erase)
-			goto destroy_erase_cmd_list;
-
-		if (prev_erase != erase ||
-		    region->offset & SNOR_OVERLAID_REGION) {
-			cmd = spi_nor_init_erase_cmd(region, erase);
-			if (IS_ERR(cmd)) {
-				ret = PTR_ERR(cmd);
-				goto destroy_erase_cmd_list;
-			}
-
-			list_add_tail(&cmd->list, erase_list);
-		} else {
-			cmd->count++;
-		}
-
-		addr += cmd->size;
-		len -= cmd->size;
-
-		if (len && addr >= region_end) {
-			region = spi_nor_region_next(region);
-			if (!region)
-				goto destroy_erase_cmd_list;
-			region_end = spi_nor_region_end(region);
-		}
-
-		prev_erase = erase;
-	}
-
-	return 0;
-
-destroy_erase_cmd_list:
-	spi_nor_destroy_erase_cmd_list(erase_list);
-	return ret;
-}
-
-/**
- * spi_nor_erase_multi_sectors() - perform a non-uniform erase
- * @nor:	pointer to a 'struct spi_nor'
- * @addr:	offset in the serial flash memory
- * @len:	number of bytes to erase
- *
- * Build a list of best fitted erase commands and execute it once we validate
- * that the erase can be performed.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_erase_multi_sectors(struct spi_nor *nor, u64 addr, u32 len)
-{
-	LIST_HEAD(erase_list);
-	struct spi_nor_erase_command *cmd, *next;
-	int ret;
-
-	ret = spi_nor_init_erase_cmd_list(nor, &erase_list, addr, len);
-	if (ret)
-		return ret;
-
-	list_for_each_entry_safe(cmd, next, &erase_list, list) {
-		nor->erase_opcode = cmd->opcode;
-		while (cmd->count) {
-			ret = spi_nor_write_enable(nor);
-			if (ret)
-				goto destroy_erase_cmd_list;
-
-			ret = spi_nor_erase_sector(nor, addr);
-			if (ret)
-				goto destroy_erase_cmd_list;
-
-			addr += cmd->size;
-			cmd->count--;
-
-			ret = spi_nor_wait_till_ready(nor);
-			if (ret)
-				goto destroy_erase_cmd_list;
-		}
-		list_del(&cmd->list);
-		kfree(cmd);
-	}
-
-	return 0;
-
-destroy_erase_cmd_list:
-	spi_nor_destroy_erase_cmd_list(&erase_list);
-	return ret;
-}
-
-/*
- * Erase an address range on the nor chip.  The address range may extend
- * one or more erase sectors.  Return an error is there is a problem erasing.
- */
-static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr)
-{
-	struct spi_nor *nor = mtd_to_spi_nor(mtd);
-	u32 addr, len;
-	uint32_t rem;
-	int ret;
-
-	dev_dbg(nor->dev, "at 0x%llx, len %lld\n", (long long)instr->addr,
-			(long long)instr->len);
-
-	if (spi_nor_has_uniform_erase(nor)) {
-		div_u64_rem(instr->len, mtd->erasesize, &rem);
-		if (rem)
-			return -EINVAL;
-	}
-
-	addr = instr->addr;
-	len = instr->len;
-
-	ret = spi_nor_lock_and_prep(nor);
-	if (ret)
-		return ret;
-
-	/* whole-chip erase? */
-	if (len == mtd->size && !(nor->flags & SNOR_F_NO_OP_CHIP_ERASE)) {
-		unsigned long timeout;
-
-		ret = spi_nor_write_enable(nor);
-		if (ret)
-			goto erase_err;
-
-		ret = spi_nor_erase_chip(nor);
-		if (ret)
-			goto erase_err;
-
-		/*
-		 * Scale the timeout linearly with the size of the flash, with
-		 * a minimum calibrated to an old 2MB flash. We could try to
-		 * pull these from CFI/SFDP, but these values should be good
-		 * enough for now.
-		 */
-		timeout = max(CHIP_ERASE_2MB_READY_WAIT_JIFFIES,
-			      CHIP_ERASE_2MB_READY_WAIT_JIFFIES *
-			      (unsigned long)(mtd->size / SZ_2M));
-		ret = spi_nor_wait_till_ready_with_timeout(nor, timeout);
-		if (ret)
-			goto erase_err;
-
-	/* REVISIT in some cases we could speed up erasing large regions
-	 * by using SPINOR_OP_SE instead of SPINOR_OP_BE_4K.  We may have set up
-	 * to use "small sector erase", but that's not always optimal.
-	 */
-
-	/* "sector"-at-a-time erase */
-	} else if (spi_nor_has_uniform_erase(nor)) {
-		while (len) {
-			ret = spi_nor_write_enable(nor);
-			if (ret)
-				goto erase_err;
-
-			ret = spi_nor_erase_sector(nor, addr);
-			if (ret)
-				goto erase_err;
-
-			addr += mtd->erasesize;
-			len -= mtd->erasesize;
-
-			ret = spi_nor_wait_till_ready(nor);
-			if (ret)
-				goto erase_err;
-		}
-
-	/* erase multiple sectors */
-	} else {
-		ret = spi_nor_erase_multi_sectors(nor, addr, len);
-		if (ret)
-			goto erase_err;
-	}
-
-	ret = spi_nor_write_disable(nor);
-
-erase_err:
-	spi_nor_unlock_and_unprep(nor);
-
-	return ret;
-}
-
-static void stm_get_locked_range(struct spi_nor *nor, u8 sr, loff_t *ofs,
-				 uint64_t *len)
-{
-	struct mtd_info *mtd = &nor->mtd;
-	u8 mask = SR_BP2 | SR_BP1 | SR_BP0;
-	u8 tb_mask = SR_TB_BIT5;
-	int shift = ffs(mask) - 1;
-	int pow;
-
-	if (nor->flags & SNOR_F_HAS_SR_TB_BIT6)
-		tb_mask = SR_TB_BIT6;
-
-	if (!(sr & mask)) {
-		/* No protection */
-		*ofs = 0;
-		*len = 0;
-	} else {
-		pow = ((sr & mask) ^ mask) >> shift;
-		*len = mtd->size >> pow;
-		if (nor->flags & SNOR_F_HAS_SR_TB && sr & tb_mask)
-			*ofs = 0;
-		else
-			*ofs = mtd->size - *len;
-	}
-}
-
-/*
- * Return 1 if the entire region is locked (if @locked is true) or unlocked (if
- * @locked is false); 0 otherwise
- */
-static int stm_check_lock_status_sr(struct spi_nor *nor, loff_t ofs, uint64_t len,
-				    u8 sr, bool locked)
-{
-	loff_t lock_offs;
-	uint64_t lock_len;
-
-	if (!len)
-		return 1;
-
-	stm_get_locked_range(nor, sr, &lock_offs, &lock_len);
-
-	if (locked)
-		/* Requested range is a sub-range of locked range */
-		return (ofs + len <= lock_offs + lock_len) && (ofs >= lock_offs);
-	else
-		/* Requested range does not overlap with locked range */
-		return (ofs >= lock_offs + lock_len) || (ofs + len <= lock_offs);
-}
-
-static int stm_is_locked_sr(struct spi_nor *nor, loff_t ofs, uint64_t len,
-			    u8 sr)
-{
-	return stm_check_lock_status_sr(nor, ofs, len, sr, true);
-}
-
-static int stm_is_unlocked_sr(struct spi_nor *nor, loff_t ofs, uint64_t len,
-			      u8 sr)
-{
-	return stm_check_lock_status_sr(nor, ofs, len, sr, false);
-}
-
-/*
- * Lock a region of the flash. Compatible with ST Micro and similar flash.
- * Supports the block protection bits BP{0,1,2} in the status register
- * (SR). Does not support these features found in newer SR bitfields:
- *   - SEC: sector/block protect - only handle SEC=0 (block protect)
- *   - CMP: complement protect - only support CMP=0 (range is not complemented)
- *
- * Support for the following is provided conditionally for some flash:
- *   - TB: top/bottom protect
- *
- * Sample table portion for 8MB flash (Winbond w25q64fw):
- *
- *   SEC  |  TB   |  BP2  |  BP1  |  BP0  |  Prot Length  | Protected Portion
- *  --------------------------------------------------------------------------
- *    X   |   X   |   0   |   0   |   0   |  NONE         | NONE
- *    0   |   0   |   0   |   0   |   1   |  128 KB       | Upper 1/64
- *    0   |   0   |   0   |   1   |   0   |  256 KB       | Upper 1/32
- *    0   |   0   |   0   |   1   |   1   |  512 KB       | Upper 1/16
- *    0   |   0   |   1   |   0   |   0   |  1 MB         | Upper 1/8
- *    0   |   0   |   1   |   0   |   1   |  2 MB         | Upper 1/4
- *    0   |   0   |   1   |   1   |   0   |  4 MB         | Upper 1/2
- *    X   |   X   |   1   |   1   |   1   |  8 MB         | ALL
- *  ------|-------|-------|-------|-------|---------------|-------------------
- *    0   |   1   |   0   |   0   |   1   |  128 KB       | Lower 1/64
- *    0   |   1   |   0   |   1   |   0   |  256 KB       | Lower 1/32
- *    0   |   1   |   0   |   1   |   1   |  512 KB       | Lower 1/16
- *    0   |   1   |   1   |   0   |   0   |  1 MB         | Lower 1/8
- *    0   |   1   |   1   |   0   |   1   |  2 MB         | Lower 1/4
- *    0   |   1   |   1   |   1   |   0   |  4 MB         | Lower 1/2
- *
- * Returns negative on errors, 0 on success.
- */
-static int stm_lock(struct spi_nor *nor, loff_t ofs, uint64_t len)
-{
-	struct mtd_info *mtd = &nor->mtd;
-	int ret, status_old, status_new;
-	u8 mask = SR_BP2 | SR_BP1 | SR_BP0;
-	u8 tb_mask = SR_TB_BIT5;
-	u8 shift = ffs(mask) - 1, pow, val;
-	loff_t lock_len;
-	bool can_be_top = true, can_be_bottom = nor->flags & SNOR_F_HAS_SR_TB;
-	bool use_top;
-
-	ret = spi_nor_read_sr(nor, nor->bouncebuf);
-	if (ret)
-		return ret;
-
-	status_old = nor->bouncebuf[0];
-
-	/* If nothing in our range is unlocked, we don't need to do anything */
-	if (stm_is_locked_sr(nor, ofs, len, status_old))
-		return 0;
-
-	/* If anything below us is unlocked, we can't use 'bottom' protection */
-	if (!stm_is_locked_sr(nor, 0, ofs, status_old))
-		can_be_bottom = false;
-
-	/* If anything above us is unlocked, we can't use 'top' protection */
-	if (!stm_is_locked_sr(nor, ofs + len, mtd->size - (ofs + len),
-				status_old))
-		can_be_top = false;
-
-	if (!can_be_bottom && !can_be_top)
-		return -EINVAL;
-
-	/* Prefer top, if both are valid */
-	use_top = can_be_top;
-
-	/* lock_len: length of region that should end up locked */
-	if (use_top)
-		lock_len = mtd->size - ofs;
-	else
-		lock_len = ofs + len;
-
-	if (nor->flags & SNOR_F_HAS_SR_TB_BIT6)
-		tb_mask = SR_TB_BIT6;
-
-	/*
-	 * Need smallest pow such that:
-	 *
-	 *   1 / (2^pow) <= (len / size)
-	 *
-	 * so (assuming power-of-2 size) we do:
-	 *
-	 *   pow = ceil(log2(size / len)) = log2(size) - floor(log2(len))
-	 */
-	pow = ilog2(mtd->size) - ilog2(lock_len);
-	val = mask - (pow << shift);
-	if (val & ~mask)
-		return -EINVAL;
-	/* Don't "lock" with no region! */
-	if (!(val & mask))
-		return -EINVAL;
-
-	status_new = (status_old & ~mask & ~tb_mask) | val;
-
-	/* Disallow further writes if WP pin is asserted */
-	status_new |= SR_SRWD;
-
-	if (!use_top)
-		status_new |= tb_mask;
-
-	/* Don't bother if they're the same */
-	if (status_new == status_old)
-		return 0;
-
-	/* Only modify protection if it will not unlock other areas */
-	if ((status_new & mask) < (status_old & mask))
-		return -EINVAL;
-
-	return spi_nor_write_sr_and_check(nor, status_new);
-}
-
-/*
- * Unlock a region of the flash. See stm_lock() for more info
- *
- * Returns negative on errors, 0 on success.
- */
-static int stm_unlock(struct spi_nor *nor, loff_t ofs, uint64_t len)
-{
-	struct mtd_info *mtd = &nor->mtd;
-	int ret, status_old, status_new;
-	u8 mask = SR_BP2 | SR_BP1 | SR_BP0;
-	u8 tb_mask = SR_TB_BIT5;
-	u8 shift = ffs(mask) - 1, pow, val;
-	loff_t lock_len;
-	bool can_be_top = true, can_be_bottom = nor->flags & SNOR_F_HAS_SR_TB;
-	bool use_top;
-
-	ret = spi_nor_read_sr(nor, nor->bouncebuf);
-	if (ret)
-		return ret;
-
-	status_old = nor->bouncebuf[0];
-
-	/* If nothing in our range is locked, we don't need to do anything */
-	if (stm_is_unlocked_sr(nor, ofs, len, status_old))
-		return 0;
-
-	/* If anything below us is locked, we can't use 'top' protection */
-	if (!stm_is_unlocked_sr(nor, 0, ofs, status_old))
-		can_be_top = false;
-
-	/* If anything above us is locked, we can't use 'bottom' protection */
-	if (!stm_is_unlocked_sr(nor, ofs + len, mtd->size - (ofs + len),
-				status_old))
-		can_be_bottom = false;
-
-	if (!can_be_bottom && !can_be_top)
-		return -EINVAL;
-
-	/* Prefer top, if both are valid */
-	use_top = can_be_top;
-
-	/* lock_len: length of region that should remain locked */
-	if (use_top)
-		lock_len = mtd->size - (ofs + len);
-	else
-		lock_len = ofs;
-
-	if (nor->flags & SNOR_F_HAS_SR_TB_BIT6)
-		tb_mask = SR_TB_BIT6;
-	/*
-	 * Need largest pow such that:
-	 *
-	 *   1 / (2^pow) >= (len / size)
-	 *
-	 * so (assuming power-of-2 size) we do:
-	 *
-	 *   pow = floor(log2(size / len)) = log2(size) - ceil(log2(len))
-	 */
-	pow = ilog2(mtd->size) - order_base_2(lock_len);
-	if (lock_len == 0) {
-		val = 0; /* fully unlocked */
-	} else {
-		val = mask - (pow << shift);
-		/* Some power-of-two sizes are not supported */
-		if (val & ~mask)
-			return -EINVAL;
-	}
-
-	status_new = (status_old & ~mask & ~tb_mask) | val;
-
-	/* Don't protect status register if we're fully unlocked */
-	if (lock_len == 0)
-		status_new &= ~SR_SRWD;
-
-	if (!use_top)
-		status_new |= tb_mask;
-
-	/* Don't bother if they're the same */
-	if (status_new == status_old)
-		return 0;
-
-	/* Only modify protection if it will not lock other areas */
-	if ((status_new & mask) > (status_old & mask))
-		return -EINVAL;
-
-	return spi_nor_write_sr_and_check(nor, status_new);
-}
-
-/*
- * Check if a region of the flash is (completely) locked. See stm_lock() for
- * more info.
- *
- * Returns 1 if entire region is locked, 0 if any portion is unlocked, and
- * negative on errors.
- */
-static int stm_is_locked(struct spi_nor *nor, loff_t ofs, uint64_t len)
-{
-	int ret;
-
-	ret = spi_nor_read_sr(nor, nor->bouncebuf);
-	if (ret)
-		return ret;
-
-	return stm_is_locked_sr(nor, ofs, len, nor->bouncebuf[0]);
-}
-
-static const struct spi_nor_locking_ops stm_locking_ops = {
-	.lock = stm_lock,
-	.unlock = stm_unlock,
-	.is_locked = stm_is_locked,
-};
-
-static int spi_nor_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
-{
-	struct spi_nor *nor = mtd_to_spi_nor(mtd);
-	int ret;
-
-	ret = spi_nor_lock_and_prep(nor);
-	if (ret)
-		return ret;
-
-	ret = nor->params.locking_ops->lock(nor, ofs, len);
-
-	spi_nor_unlock_and_unprep(nor);
-	return ret;
-}
-
-static int spi_nor_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
-{
-	struct spi_nor *nor = mtd_to_spi_nor(mtd);
-	int ret;
-
-	ret = spi_nor_lock_and_prep(nor);
-	if (ret)
-		return ret;
-
-	ret = nor->params.locking_ops->unlock(nor, ofs, len);
-
-	spi_nor_unlock_and_unprep(nor);
-	return ret;
-}
-
-static int spi_nor_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
-{
-	struct spi_nor *nor = mtd_to_spi_nor(mtd);
-	int ret;
-
-	ret = spi_nor_lock_and_prep(nor);
-	if (ret)
-		return ret;
-
-	ret = nor->params.locking_ops->is_locked(nor, ofs, len);
-
-	spi_nor_unlock_and_unprep(nor);
-	return ret;
-}
-
-/**
- * spi_nor_sr1_bit6_quad_enable() - Set the Quad Enable BIT(6) in the Status
- * Register 1.
- * @nor:	pointer to a 'struct spi_nor'
- *
- * Bit 6 of the Status Register 1 is the QE bit for Macronix like QSPI memories.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_sr1_bit6_quad_enable(struct spi_nor *nor)
-{
-	int ret;
-
-	ret = spi_nor_read_sr(nor, nor->bouncebuf);
-	if (ret)
-		return ret;
-
-	if (nor->bouncebuf[0] & SR1_QUAD_EN_BIT6)
-		return 0;
-
-	nor->bouncebuf[0] |= SR1_QUAD_EN_BIT6;
-
-	return spi_nor_write_sr1_and_check(nor, nor->bouncebuf[0]);
-}
-
-/**
- * spi_nor_sr2_bit1_quad_enable() - set the Quad Enable BIT(1) in the Status
- * Register 2.
- * @nor:       pointer to a 'struct spi_nor'.
- *
- * Bit 1 of the Status Register 2 is the QE bit for Spansion like QSPI memories.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_sr2_bit1_quad_enable(struct spi_nor *nor)
-{
-	int ret;
-
-	if (nor->flags & SNOR_F_NO_READ_CR)
-		return spi_nor_write_16bit_cr_and_check(nor, SR2_QUAD_EN_BIT1);
-
-	ret = spi_nor_read_cr(nor, nor->bouncebuf);
-	if (ret)
-		return ret;
-
-	if (nor->bouncebuf[0] & SR2_QUAD_EN_BIT1)
-		return 0;
-
-	nor->bouncebuf[0] |= SR2_QUAD_EN_BIT1;
-
-	return spi_nor_write_16bit_cr_and_check(nor, nor->bouncebuf[0]);
-}
-
-/**
- * spi_nor_sr2_bit7_quad_enable() - set QE bit in Status Register 2.
- * @nor:	pointer to a 'struct spi_nor'
- *
- * Set the Quad Enable (QE) bit in the Status Register 2.
- *
- * This is one of the procedures to set the QE bit described in the SFDP
- * (JESD216 rev B) specification but no manufacturer using this procedure has
- * been identified yet, hence the name of the function.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_sr2_bit7_quad_enable(struct spi_nor *nor)
-{
-	u8 *sr2 = nor->bouncebuf;
-	int ret;
-	u8 sr2_written;
-
-	/* Check current Quad Enable bit value. */
-	ret = spi_nor_read_sr2(nor, sr2);
-	if (ret)
-		return ret;
-	if (*sr2 & SR2_QUAD_EN_BIT7)
-		return 0;
-
-	/* Update the Quad Enable bit. */
-	*sr2 |= SR2_QUAD_EN_BIT7;
-
-	ret = spi_nor_write_sr2(nor, sr2);
-	if (ret)
-		return ret;
-
-	sr2_written = *sr2;
-
-	/* Read back and check it. */
-	ret = spi_nor_read_sr2(nor, sr2);
-	if (ret)
-		return ret;
-
-	if (*sr2 != sr2_written) {
-		dev_dbg(nor->dev, "SR2: Read back test failed\n");
-		return -EIO;
-	}
-
-	return 0;
-}
-
-/* Used when the "_ext_id" is two bytes at most */
-#define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags)	\
-		.id = {							\
-			((_jedec_id) >> 16) & 0xff,			\
-			((_jedec_id) >> 8) & 0xff,			\
-			(_jedec_id) & 0xff,				\
-			((_ext_id) >> 8) & 0xff,			\
-			(_ext_id) & 0xff,				\
-			},						\
-		.id_len = (!(_jedec_id) ? 0 : (3 + ((_ext_id) ? 2 : 0))),	\
-		.sector_size = (_sector_size),				\
-		.n_sectors = (_n_sectors),				\
-		.page_size = 256,					\
-		.flags = (_flags),
-
-#define INFO6(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags)	\
-		.id = {							\
-			((_jedec_id) >> 16) & 0xff,			\
-			((_jedec_id) >> 8) & 0xff,			\
-			(_jedec_id) & 0xff,				\
-			((_ext_id) >> 16) & 0xff,			\
-			((_ext_id) >> 8) & 0xff,			\
-			(_ext_id) & 0xff,				\
-			},						\
-		.id_len = 6,						\
-		.sector_size = (_sector_size),				\
-		.n_sectors = (_n_sectors),				\
-		.page_size = 256,					\
-		.flags = (_flags),
-
-#define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_width, _flags)	\
-		.sector_size = (_sector_size),				\
-		.n_sectors = (_n_sectors),				\
-		.page_size = (_page_size),				\
-		.addr_width = (_addr_width),				\
-		.flags = (_flags),
-
-#define S3AN_INFO(_jedec_id, _n_sectors, _page_size)			\
-		.id = {							\
-			((_jedec_id) >> 16) & 0xff,			\
-			((_jedec_id) >> 8) & 0xff,			\
-			(_jedec_id) & 0xff				\
-			},						\
-		.id_len = 3,						\
-		.sector_size = (8*_page_size),				\
-		.n_sectors = (_n_sectors),				\
-		.page_size = _page_size,				\
-		.addr_width = 3,					\
-		.flags = SPI_NOR_NO_FR | SPI_S3AN,
-
-static int
-is25lp256_post_bfpt_fixups(struct spi_nor *nor,
-			   const struct sfdp_parameter_header *bfpt_header,
-			   const struct sfdp_bfpt *bfpt,
-			   struct spi_nor_flash_parameter *params)
-{
-	/*
-	 * IS25LP256 supports 4B opcodes, but the BFPT advertises a
-	 * BFPT_DWORD1_ADDRESS_BYTES_3_ONLY address width.
-	 * Overwrite the address width advertised by the BFPT.
-	 */
-	if ((bfpt->dwords[BFPT_DWORD(1)] & BFPT_DWORD1_ADDRESS_BYTES_MASK) ==
-		BFPT_DWORD1_ADDRESS_BYTES_3_ONLY)
-		nor->addr_width = 4;
-
-	return 0;
-}
-
-static struct spi_nor_fixups is25lp256_fixups = {
-	.post_bfpt = is25lp256_post_bfpt_fixups,
-};
-
-static int
-mx25l25635_post_bfpt_fixups(struct spi_nor *nor,
-			    const struct sfdp_parameter_header *bfpt_header,
-			    const struct sfdp_bfpt *bfpt,
-			    struct spi_nor_flash_parameter *params)
-{
-	/*
-	 * MX25L25635F supports 4B opcodes but MX25L25635E does not.
-	 * Unfortunately, Macronix has re-used the same JEDEC ID for both
-	 * variants which prevents us from defining a new entry in the parts
-	 * table.
-	 * We need a way to differentiate MX25L25635E and MX25L25635F, and it
-	 * seems that the F version advertises support for Fast Read 4-4-4 in
-	 * its BFPT table.
-	 */
-	if (bfpt->dwords[BFPT_DWORD(5)] & BFPT_DWORD5_FAST_READ_4_4_4)
-		nor->flags |= SNOR_F_4B_OPCODES;
-
-	return 0;
-}
-
-static struct spi_nor_fixups mx25l25635_fixups = {
-	.post_bfpt = mx25l25635_post_bfpt_fixups,
-};
-
-static void gd25q256_default_init(struct spi_nor *nor)
-{
-	/*
-	 * Some manufacturer like GigaDevice may use different
-	 * bit to set QE on different memories, so the MFR can't
-	 * indicate the quad_enable method for this case, we need
-	 * to set it in the default_init fixup hook.
-	 */
-	nor->params.quad_enable = spi_nor_sr1_bit6_quad_enable;
-}
-
-static struct spi_nor_fixups gd25q256_fixups = {
-	.default_init = gd25q256_default_init,
-};
-
-/* NOTE: double check command sets and memory organization when you add
- * more nor chips.  This current list focusses on newer chips, which
- * have been converging on command sets which including JEDEC ID.
- *
- * All newly added entries should describe *hardware* and should use SECT_4K
- * (or SECT_4K_PMC) if hardware supports erasing 4 KiB sectors. For usage
- * scenarios excluding small sectors there is config option that can be
- * disabled: CONFIG_MTD_SPI_NOR_USE_4K_SECTORS.
- * For historical (and compatibility) reasons (before we got above config) some
- * old entries may be missing 4K flag.
- */
-static const struct flash_info spi_nor_ids[] = {
-	/* Atmel -- some are (confusingly) marketed as "DataFlash" */
-	{ "at25fs010",  INFO(0x1f6601, 0, 32 * 1024,   4, SECT_4K) },
-	{ "at25fs040",  INFO(0x1f6604, 0, 64 * 1024,   8, SECT_4K) },
-
-	{ "at25df041a", INFO(0x1f4401, 0, 64 * 1024,   8, SECT_4K) },
-	{ "at25df321",  INFO(0x1f4700, 0, 64 * 1024,  64, SECT_4K) },
-	{ "at25df321a", INFO(0x1f4701, 0, 64 * 1024,  64, SECT_4K) },
-	{ "at25df641",  INFO(0x1f4800, 0, 64 * 1024, 128, SECT_4K) },
-
-	{ "at25sl321",	INFO(0x1f4216, 0, 64 * 1024, 64,
-			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-
-	{ "at26f004",   INFO(0x1f0400, 0, 64 * 1024,  8, SECT_4K) },
-	{ "at26df081a", INFO(0x1f4501, 0, 64 * 1024, 16, SECT_4K) },
-	{ "at26df161a", INFO(0x1f4601, 0, 64 * 1024, 32, SECT_4K) },
-	{ "at26df321",  INFO(0x1f4700, 0, 64 * 1024, 64, SECT_4K) },
-
-	{ "at45db081d", INFO(0x1f2500, 0, 64 * 1024, 16, SECT_4K) },
-
-	/* EON -- en25xxx */
-	{ "en25f32",    INFO(0x1c3116, 0, 64 * 1024,   64, SECT_4K) },
-	{ "en25p32",    INFO(0x1c2016, 0, 64 * 1024,   64, 0) },
-	{ "en25q32b",   INFO(0x1c3016, 0, 64 * 1024,   64, 0) },
-	{ "en25p64",    INFO(0x1c2017, 0, 64 * 1024,  128, 0) },
-	{ "en25q64",    INFO(0x1c3017, 0, 64 * 1024,  128, SECT_4K) },
-	{ "en25q80a",   INFO(0x1c3014, 0, 64 * 1024,   16,
-			SECT_4K | SPI_NOR_DUAL_READ) },
-	{ "en25qh16",   INFO(0x1c7015, 0, 64 * 1024,   32,
-			SECT_4K | SPI_NOR_DUAL_READ) },
-	{ "en25qh32",   INFO(0x1c7016, 0, 64 * 1024,   64, 0) },
-	{ "en25qh64",   INFO(0x1c7017, 0, 64 * 1024,  128,
-			SECT_4K | SPI_NOR_DUAL_READ) },
-	{ "en25qh128",  INFO(0x1c7018, 0, 64 * 1024,  256, 0) },
-	{ "en25qh256",  INFO(0x1c7019, 0, 64 * 1024,  512, 0) },
-	{ "en25s64",	INFO(0x1c3817, 0, 64 * 1024,  128, SECT_4K) },
-
-	/* ESMT */
-	{ "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64, SECT_4K | SPI_NOR_HAS_LOCK) },
-	{ "f25l32qa", INFO(0x8c4116, 0, 64 * 1024, 64, SECT_4K | SPI_NOR_HAS_LOCK) },
-	{ "f25l64qa", INFO(0x8c4117, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_HAS_LOCK) },
-
-	/* Everspin */
-	{ "mr25h128", CAT25_INFO( 16 * 1024, 1, 256, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
-	{ "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
-	{ "mr25h10",  CAT25_INFO(128 * 1024, 1, 256, 3, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
-	{ "mr25h40",  CAT25_INFO(512 * 1024, 1, 256, 3, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
-
-	/* Fujitsu */
-	{ "mb85rs1mt", INFO(0x047f27, 0, 128 * 1024, 1, SPI_NOR_NO_ERASE) },
-
-	/* GigaDevice */
-	{
-		"gd25q16", INFO(0xc84015, 0, 64 * 1024,  32,
-			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
-	},
-	{
-		"gd25q32", INFO(0xc84016, 0, 64 * 1024,  64,
-			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
-	},
-	{
-		"gd25lq32", INFO(0xc86016, 0, 64 * 1024, 64,
-			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
-	},
-	{
-		"gd25q64", INFO(0xc84017, 0, 64 * 1024, 128,
-			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
-	},
-	{
-		"gd25lq64c", INFO(0xc86017, 0, 64 * 1024, 128,
-			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
-	},
-	{
-		"gd25lq128d", INFO(0xc86018, 0, 64 * 1024, 256,
-			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
-	},
-	{
-		"gd25q128", INFO(0xc84018, 0, 64 * 1024, 256,
-			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
-	},
-	{
-		"gd25q256", INFO(0xc84019, 0, 64 * 1024, 512,
-			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			SPI_NOR_4B_OPCODES | SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
-			SPI_NOR_TB_SR_BIT6)
-			.fixups = &gd25q256_fixups,
-	},
-
-	/* Intel/Numonyx -- xxxs33b */
-	{ "160s33b",  INFO(0x898911, 0, 64 * 1024,  32, 0) },
-	{ "320s33b",  INFO(0x898912, 0, 64 * 1024,  64, 0) },
-	{ "640s33b",  INFO(0x898913, 0, 64 * 1024, 128, 0) },
-
-	/* ISSI */
-	{ "is25cd512",  INFO(0x7f9d20, 0, 32 * 1024,   2, SECT_4K) },
-	{ "is25lq040b", INFO(0x9d4013, 0, 64 * 1024,   8,
-			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "is25lp016d", INFO(0x9d6015, 0, 64 * 1024,  32,
-			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "is25lp080d", INFO(0x9d6014, 0, 64 * 1024,  16,
-			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "is25lp032",  INFO(0x9d6016, 0, 64 * 1024,  64,
-			SECT_4K | SPI_NOR_DUAL_READ) },
-	{ "is25lp064",  INFO(0x9d6017, 0, 64 * 1024, 128,
-			SECT_4K | SPI_NOR_DUAL_READ) },
-	{ "is25lp128",  INFO(0x9d6018, 0, 64 * 1024, 256,
-			SECT_4K | SPI_NOR_DUAL_READ) },
-	{ "is25lp256",  INFO(0x9d6019, 0, 64 * 1024, 512,
-			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			SPI_NOR_4B_OPCODES)
-			.fixups = &is25lp256_fixups },
-	{ "is25wp032",  INFO(0x9d7016, 0, 64 * 1024,  64,
-			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "is25wp064",  INFO(0x9d7017, 0, 64 * 1024, 128,
-			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "is25wp128",  INFO(0x9d7018, 0, 64 * 1024, 256,
-			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "is25wp256", INFO(0x9d7019, 0, 64 * 1024, 512,
-			    SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			    SPI_NOR_4B_OPCODES)
-		       .fixups = &is25lp256_fixups },
-
-	/* Macronix */
-	{ "mx25l512e",   INFO(0xc22010, 0, 64 * 1024,   1, SECT_4K) },
-	{ "mx25l2005a",  INFO(0xc22012, 0, 64 * 1024,   4, SECT_4K) },
-	{ "mx25l4005a",  INFO(0xc22013, 0, 64 * 1024,   8, SECT_4K) },
-	{ "mx25l8005",   INFO(0xc22014, 0, 64 * 1024,  16, 0) },
-	{ "mx25l1606e",  INFO(0xc22015, 0, 64 * 1024,  32, SECT_4K) },
-	{ "mx25l3205d",  INFO(0xc22016, 0, 64 * 1024,  64, SECT_4K) },
-	{ "mx25l3255e",  INFO(0xc29e16, 0, 64 * 1024,  64, SECT_4K) },
-	{ "mx25l6405d",  INFO(0xc22017, 0, 64 * 1024, 128, SECT_4K) },
-	{ "mx25u2033e",  INFO(0xc22532, 0, 64 * 1024,   4, SECT_4K) },
-	{ "mx25u3235f",	 INFO(0xc22536, 0, 64 * 1024,  64,
-			 SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "mx25u4035",   INFO(0xc22533, 0, 64 * 1024,   8, SECT_4K) },
-	{ "mx25u8035",   INFO(0xc22534, 0, 64 * 1024,  16, SECT_4K) },
-	{ "mx25u6435f",  INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) },
-	{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
-	{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
-	{ "mx25r3235f",  INFO(0xc22816, 0, 64 * 1024,  64,
-			 SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "mx25u12835f", INFO(0xc22538, 0, 64 * 1024, 256,
-			 SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512,
-			 SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
-			 .fixups = &mx25l25635_fixups },
-	{ "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_4B_OPCODES) },
-	{ "mx25v8035f",  INFO(0xc22314, 0, 64 * 1024,  16,
-			 SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
-	{ "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
-	{ "mx66u51235f", INFO(0xc2253a, 0, 64 * 1024, 1024, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
-	{ "mx66l1g45g",  INFO(0xc2201b, 0, 64 * 1024, 2048, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "mx66l1g55g",  INFO(0xc2261b, 0, 64 * 1024, 2048, SPI_NOR_QUAD_READ) },
-
-	/* Micron <--> ST Micro */
-	{ "n25q016a",	 INFO(0x20bb15, 0, 64 * 1024,   32, SECT_4K | SPI_NOR_QUAD_READ) },
-	{ "n25q032",	 INFO(0x20ba16, 0, 64 * 1024,   64, SPI_NOR_QUAD_READ) },
-	{ "n25q032a",	 INFO(0x20bb16, 0, 64 * 1024,   64, SPI_NOR_QUAD_READ) },
-	{ "n25q064",     INFO(0x20ba17, 0, 64 * 1024,  128, SECT_4K | SPI_NOR_QUAD_READ) },
-	{ "n25q064a",    INFO(0x20bb17, 0, 64 * 1024,  128, SECT_4K | SPI_NOR_QUAD_READ) },
-	{ "n25q128a11",  INFO(0x20bb18, 0, 64 * 1024,  256, SECT_4K |
-			      USE_FSR | SPI_NOR_QUAD_READ) },
-	{ "n25q128a13",  INFO(0x20ba18, 0, 64 * 1024,  256, SECT_4K |
-			      USE_FSR | SPI_NOR_QUAD_READ) },
-	{ "mt25ql256a",  INFO6(0x20ba19, 0x104400, 64 * 1024,  512,
-			       SECT_4K | USE_FSR | SPI_NOR_DUAL_READ |
-			       SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
-	{ "n25q256a",    INFO(0x20ba19, 0, 64 * 1024,  512, SECT_4K |
-			      USE_FSR | SPI_NOR_DUAL_READ |
-			      SPI_NOR_QUAD_READ) },
-	{ "mt25qu256a",  INFO6(0x20bb19, 0x104400, 64 * 1024,  512,
-			       SECT_4K | USE_FSR | SPI_NOR_DUAL_READ |
-			       SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
-	{ "n25q256ax1",  INFO(0x20bb19, 0, 64 * 1024,  512, SECT_4K |
-			      USE_FSR | SPI_NOR_QUAD_READ) },
-	{ "mt25ql512a",  INFO6(0x20ba20, 0x104400, 64 * 1024, 1024,
-			       SECT_4K | USE_FSR | SPI_NOR_DUAL_READ |
-			       SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
-	{ "n25q512ax3",  INFO(0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
-	{ "mt25qu512a",  INFO6(0x20bb20, 0x104400, 64 * 1024, 1024,
-			       SECT_4K | USE_FSR | SPI_NOR_DUAL_READ |
-			       SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
-	{ "n25q512a",    INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K |
-			      USE_FSR | SPI_NOR_QUAD_READ) },
-	{ "n25q00",      INFO(0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
-	{ "n25q00a",     INFO(0x20bb21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
-	{ "mt25ql02g",   INFO(0x20ba22, 0, 64 * 1024, 4096,
-			      SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
-			      NO_CHIP_ERASE) },
-	{ "mt25qu02g",   INFO(0x20bb22, 0, 64 * 1024, 4096, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
-
-	/* Micron */
-	{
-		"mt35xu512aba", INFO(0x2c5b1a, 0, 128 * 1024, 512,
-			SECT_4K | USE_FSR | SPI_NOR_OCTAL_READ |
-			SPI_NOR_4B_OPCODES)
-	},
-	{ "mt35xu02g",  INFO(0x2c5b1c, 0, 128 * 1024, 2048,
-			     SECT_4K | USE_FSR | SPI_NOR_OCTAL_READ |
-			     SPI_NOR_4B_OPCODES) },
-
-	/* PMC */
-	{ "pm25lv512",   INFO(0,        0, 32 * 1024,    2, SECT_4K_PMC) },
-	{ "pm25lv010",   INFO(0,        0, 32 * 1024,    4, SECT_4K_PMC) },
-	{ "pm25lq032",   INFO(0x7f9d46, 0, 64 * 1024,   64, SECT_4K) },
-
-	/* Spansion/Cypress -- single (large) sector size only, at least
-	 * for the chips listed here (without boot sectors).
-	 */
-	{ "s25sl032p",  INFO(0x010215, 0x4d00,  64 * 1024,  64, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "s25sl064p",  INFO(0x010216, 0x4d00,  64 * 1024, 128, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "s25fl128s0", INFO6(0x012018, 0x4d0080, 256 * 1024, 64,
-			SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
-	{ "s25fl128s1", INFO6(0x012018, 0x4d0180, 64 * 1024, 256,
-			SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
-	{ "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, USE_CLSR) },
-	{ "s25fl256s1", INFO(0x010219, 0x4d01,  64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
-	{ "s25fl512s",  INFO6(0x010220, 0x4d0080, 256 * 1024, 256,
-			SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			SPI_NOR_HAS_LOCK | USE_CLSR) },
-	{ "s25fs512s",  INFO6(0x010220, 0x4d0081, 256 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
-	{ "s70fl01gs",  INFO(0x010221, 0x4d00, 256 * 1024, 256, 0) },
-	{ "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024,  64, 0) },
-	{ "s25sl12801", INFO(0x012018, 0x0301,  64 * 1024, 256, 0) },
-	{ "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024,  64, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
-	{ "s25fl129p1", INFO(0x012018, 0x4d01,  64 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
-	{ "s25sl004a",  INFO(0x010212,      0,  64 * 1024,   8, 0) },
-	{ "s25sl008a",  INFO(0x010213,      0,  64 * 1024,  16, 0) },
-	{ "s25sl016a",  INFO(0x010214,      0,  64 * 1024,  32, 0) },
-	{ "s25sl032a",  INFO(0x010215,      0,  64 * 1024,  64, 0) },
-	{ "s25sl064a",  INFO(0x010216,      0,  64 * 1024, 128, 0) },
-	{ "s25fl004k",  INFO(0xef4013,      0,  64 * 1024,   8, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "s25fl008k",  INFO(0xef4014,      0,  64 * 1024,  16, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "s25fl016k",  INFO(0xef4015,      0,  64 * 1024,  32, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "s25fl064k",  INFO(0xef4017,      0,  64 * 1024, 128, SECT_4K) },
-	{ "s25fl116k",  INFO(0x014015,      0,  64 * 1024,  32, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "s25fl132k",  INFO(0x014016,      0,  64 * 1024,  64, SECT_4K) },
-	{ "s25fl164k",  INFO(0x014017,      0,  64 * 1024, 128, SECT_4K) },
-	{ "s25fl204k",  INFO(0x014013,      0,  64 * 1024,   8, SECT_4K | SPI_NOR_DUAL_READ) },
-	{ "s25fl208k",  INFO(0x014014,      0,  64 * 1024,  16, SECT_4K | SPI_NOR_DUAL_READ) },
-	{ "s25fl064l",  INFO(0x016017,      0,  64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
-	{ "s25fl128l",  INFO(0x016018,      0,  64 * 1024, 256, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
-	{ "s25fl256l",  INFO(0x016019,      0,  64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
-
-	/* SST -- large erase sizes are "overlays", "sectors" are 4K */
-	{ "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024,  8, SECT_4K | SST_WRITE) },
-	{ "sst25vf080b", INFO(0xbf258e, 0, 64 * 1024, 16, SECT_4K | SST_WRITE) },
-	{ "sst25vf016b", INFO(0xbf2541, 0, 64 * 1024, 32, SECT_4K | SST_WRITE) },
-	{ "sst25vf032b", INFO(0xbf254a, 0, 64 * 1024, 64, SECT_4K | SST_WRITE) },
-	{ "sst25vf064c", INFO(0xbf254b, 0, 64 * 1024, 128, SECT_4K) },
-	{ "sst25wf512",  INFO(0xbf2501, 0, 64 * 1024,  1, SECT_4K | SST_WRITE) },
-	{ "sst25wf010",  INFO(0xbf2502, 0, 64 * 1024,  2, SECT_4K | SST_WRITE) },
-	{ "sst25wf020",  INFO(0xbf2503, 0, 64 * 1024,  4, SECT_4K | SST_WRITE) },
-	{ "sst25wf020a", INFO(0x621612, 0, 64 * 1024,  4, SECT_4K) },
-	{ "sst25wf040b", INFO(0x621613, 0, 64 * 1024,  8, SECT_4K) },
-	{ "sst25wf040",  INFO(0xbf2504, 0, 64 * 1024,  8, SECT_4K | SST_WRITE) },
-	{ "sst25wf080",  INFO(0xbf2505, 0, 64 * 1024, 16, SECT_4K | SST_WRITE) },
-	{ "sst26wf016b", INFO(0xbf2651, 0, 64 * 1024, 32, SECT_4K |
-			      SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "sst26vf016b", INFO(0xbf2641, 0, 64 * 1024, 32, SECT_4K |
-			      SPI_NOR_DUAL_READ) },
-	{ "sst26vf064b", INFO(0xbf2643, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-
-	/* ST Microelectronics -- newer production may have feature updates */
-	{ "m25p05",  INFO(0x202010,  0,  32 * 1024,   2, 0) },
-	{ "m25p10",  INFO(0x202011,  0,  32 * 1024,   4, 0) },
-	{ "m25p20",  INFO(0x202012,  0,  64 * 1024,   4, 0) },
-	{ "m25p40",  INFO(0x202013,  0,  64 * 1024,   8, 0) },
-	{ "m25p80",  INFO(0x202014,  0,  64 * 1024,  16, 0) },
-	{ "m25p16",  INFO(0x202015,  0,  64 * 1024,  32, 0) },
-	{ "m25p32",  INFO(0x202016,  0,  64 * 1024,  64, 0) },
-	{ "m25p64",  INFO(0x202017,  0,  64 * 1024, 128, 0) },
-	{ "m25p128", INFO(0x202018,  0, 256 * 1024,  64, 0) },
-
-	{ "m25p05-nonjedec",  INFO(0, 0,  32 * 1024,   2, 0) },
-	{ "m25p10-nonjedec",  INFO(0, 0,  32 * 1024,   4, 0) },
-	{ "m25p20-nonjedec",  INFO(0, 0,  64 * 1024,   4, 0) },
-	{ "m25p40-nonjedec",  INFO(0, 0,  64 * 1024,   8, 0) },
-	{ "m25p80-nonjedec",  INFO(0, 0,  64 * 1024,  16, 0) },
-	{ "m25p16-nonjedec",  INFO(0, 0,  64 * 1024,  32, 0) },
-	{ "m25p32-nonjedec",  INFO(0, 0,  64 * 1024,  64, 0) },
-	{ "m25p64-nonjedec",  INFO(0, 0,  64 * 1024, 128, 0) },
-	{ "m25p128-nonjedec", INFO(0, 0, 256 * 1024,  64, 0) },
-
-	{ "m45pe10", INFO(0x204011,  0, 64 * 1024,    2, 0) },
-	{ "m45pe80", INFO(0x204014,  0, 64 * 1024,   16, 0) },
-	{ "m45pe16", INFO(0x204015,  0, 64 * 1024,   32, 0) },
-
-	{ "m25pe20", INFO(0x208012,  0, 64 * 1024,  4,       0) },
-	{ "m25pe80", INFO(0x208014,  0, 64 * 1024, 16,       0) },
-	{ "m25pe16", INFO(0x208015,  0, 64 * 1024, 32, SECT_4K) },
-
-	{ "m25px16",    INFO(0x207115,  0, 64 * 1024, 32, SECT_4K) },
-	{ "m25px32",    INFO(0x207116,  0, 64 * 1024, 64, SECT_4K) },
-	{ "m25px32-s0", INFO(0x207316,  0, 64 * 1024, 64, SECT_4K) },
-	{ "m25px32-s1", INFO(0x206316,  0, 64 * 1024, 64, SECT_4K) },
-	{ "m25px64",    INFO(0x207117,  0, 64 * 1024, 128, 0) },
-	{ "m25px80",    INFO(0x207114,  0, 64 * 1024, 16, 0) },
-
-	/* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */
-	{ "w25x05", INFO(0xef3010, 0, 64 * 1024,  1,  SECT_4K) },
-	{ "w25x10", INFO(0xef3011, 0, 64 * 1024,  2,  SECT_4K) },
-	{ "w25x20", INFO(0xef3012, 0, 64 * 1024,  4,  SECT_4K) },
-	{ "w25x40", INFO(0xef3013, 0, 64 * 1024,  8,  SECT_4K) },
-	{ "w25x80", INFO(0xef3014, 0, 64 * 1024,  16, SECT_4K) },
-	{ "w25x16", INFO(0xef3015, 0, 64 * 1024,  32, SECT_4K) },
-	{
-		"w25q16dw", INFO(0xef6015, 0, 64 * 1024,  32,
-			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
-	},
-	{ "w25x32", INFO(0xef3016, 0, 64 * 1024,  64, SECT_4K) },
-	{
-		"w25q16jv-im/jm", INFO(0xef7015, 0, 64 * 1024,  32,
-			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
-	},
-	{ "w25q20cl", INFO(0xef4012, 0, 64 * 1024,  4, SECT_4K) },
-	{ "w25q20bw", INFO(0xef5012, 0, 64 * 1024,  4, SECT_4K) },
-	{ "w25q20ew", INFO(0xef6012, 0, 64 * 1024,  4, SECT_4K) },
-	{ "w25q32", INFO(0xef4016, 0, 64 * 1024,  64, SECT_4K) },
-	{
-		"w25q32dw", INFO(0xef6016, 0, 64 * 1024,  64,
-			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
-	},
-	{
-		"w25q32jv", INFO(0xef7016, 0, 64 * 1024,  64,
-			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
-	},
-	{
-		"w25q32jwm", INFO(0xef8016, 0, 64 * 1024,  64,
-			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
-	},
-	{ "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) },
-	{ "w25q64", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) },
-	{
-		"w25q64dw", INFO(0xef6017, 0, 64 * 1024, 128,
-			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
-	},
-	{
-		"w25q128fw", INFO(0xef6018, 0, 64 * 1024, 256,
-			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
-	},
-	{
-		"w25q128jv", INFO(0xef7018, 0, 64 * 1024, 256,
-			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
-	},
-	{ "w25q80", INFO(0xef5014, 0, 64 * 1024,  16, SECT_4K) },
-	{ "w25q80bl", INFO(0xef4014, 0, 64 * 1024,  16, SECT_4K) },
-	{ "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
-	{ "w25q256", INFO(0xef4019, 0, 64 * 1024, 512,
-			  SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			  SPI_NOR_4B_OPCODES) },
-	{ "w25q256jvm", INFO(0xef7019, 0, 64 * 1024, 512,
-			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "w25q256jw", INFO(0xef6019, 0, 64 * 1024, 512,
-			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "w25m512jv", INFO(0xef7119, 0, 64 * 1024, 1024,
-			SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_DUAL_READ) },
-
-	/* Catalyst / On Semiconductor -- non-JEDEC */
-	{ "cat25c11", CAT25_INFO(  16, 8, 16, 1, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
-	{ "cat25c03", CAT25_INFO(  32, 8, 16, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
-	{ "cat25c09", CAT25_INFO( 128, 8, 32, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
-	{ "cat25c17", CAT25_INFO( 256, 8, 32, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
-	{ "cat25128", CAT25_INFO(2048, 8, 64, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
-
-	/* Xilinx S3AN Internal Flash */
-	{ "3S50AN", S3AN_INFO(0x1f2200, 64, 264) },
-	{ "3S200AN", S3AN_INFO(0x1f2400, 256, 264) },
-	{ "3S400AN", S3AN_INFO(0x1f2400, 256, 264) },
-	{ "3S700AN", S3AN_INFO(0x1f2500, 512, 264) },
-	{ "3S1400AN", S3AN_INFO(0x1f2600, 512, 528) },
-
-	/* XMC (Wuhan Xinxin Semiconductor Manufacturing Corp.) */
-	{ "XM25QH64A", INFO(0x207017, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "XM25QH128A", INFO(0x207018, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ },
-};
-
-static const struct flash_info *spi_nor_read_id(struct spi_nor *nor)
-{
-	int			tmp;
-	u8			*id = nor->bouncebuf;
-	const struct flash_info	*info;
-
-	if (nor->spimem) {
-		struct spi_mem_op op =
-			SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDID, 1),
-				   SPI_MEM_OP_NO_ADDR,
-				   SPI_MEM_OP_NO_DUMMY,
-				   SPI_MEM_OP_DATA_IN(SPI_NOR_MAX_ID_LEN, id, 1));
-
-		tmp = spi_mem_exec_op(nor->spimem, &op);
-	} else {
-		tmp = nor->controller_ops->read_reg(nor, SPINOR_OP_RDID, id,
-						    SPI_NOR_MAX_ID_LEN);
-	}
-	if (tmp) {
-		dev_dbg(nor->dev, "error %d reading JEDEC ID\n", tmp);
-		return ERR_PTR(tmp);
-	}
-
-	for (tmp = 0; tmp < ARRAY_SIZE(spi_nor_ids) - 1; tmp++) {
-		info = &spi_nor_ids[tmp];
-		if (info->id_len) {
-			if (!memcmp(info->id, id, info->id_len))
-				return &spi_nor_ids[tmp];
-		}
-	}
-	dev_err(nor->dev, "unrecognized JEDEC id bytes: %*ph\n",
-		SPI_NOR_MAX_ID_LEN, id);
-	return ERR_PTR(-ENODEV);
-}
-
-static int spi_nor_read(struct mtd_info *mtd, loff_t from, size_t len,
-			size_t *retlen, u_char *buf)
-{
-	struct spi_nor *nor = mtd_to_spi_nor(mtd);
-	ssize_t ret;
-
-	dev_dbg(nor->dev, "from 0x%08x, len %zd\n", (u32)from, len);
-
-	ret = spi_nor_lock_and_prep(nor);
-	if (ret)
-		return ret;
-
-	while (len) {
-		loff_t addr = from;
-
-		addr = spi_nor_convert_addr(nor, addr);
-
-		ret = spi_nor_read_data(nor, addr, len, buf);
-		if (ret == 0) {
-			/* We shouldn't see 0-length reads */
-			ret = -EIO;
-			goto read_err;
-		}
-		if (ret < 0)
-			goto read_err;
-
-		WARN_ON(ret > len);
-		*retlen += ret;
-		buf += ret;
-		from += ret;
-		len -= ret;
-	}
-	ret = 0;
-
-read_err:
-	spi_nor_unlock_and_unprep(nor);
-	return ret;
-}
-
-static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
-		size_t *retlen, const u_char *buf)
-{
-	struct spi_nor *nor = mtd_to_spi_nor(mtd);
-	size_t actual = 0;
-	int ret;
-
-	dev_dbg(nor->dev, "to 0x%08x, len %zd\n", (u32)to, len);
-
-	ret = spi_nor_lock_and_prep(nor);
-	if (ret)
-		return ret;
-
-	ret = spi_nor_write_enable(nor);
-	if (ret)
-		goto out;
-
-	nor->sst_write_second = false;
-
-	/* Start write from odd address. */
-	if (to % 2) {
-		nor->program_opcode = SPINOR_OP_BP;
-
-		/* write one byte. */
-		ret = spi_nor_write_data(nor, to, 1, buf);
-		if (ret < 0)
-			goto out;
-		WARN(ret != 1, "While writing 1 byte written %i bytes\n", ret);
-		ret = spi_nor_wait_till_ready(nor);
-		if (ret)
-			goto out;
-
-		to++;
-		actual++;
-	}
-
-	/* Write out most of the data here. */
-	for (; actual < len - 1; actual += 2) {
-		nor->program_opcode = SPINOR_OP_AAI_WP;
-
-		/* write two bytes. */
-		ret = spi_nor_write_data(nor, to, 2, buf + actual);
-		if (ret < 0)
-			goto out;
-		WARN(ret != 2, "While writing 2 bytes written %i bytes\n", ret);
-		ret = spi_nor_wait_till_ready(nor);
-		if (ret)
-			goto out;
-		to += 2;
-		nor->sst_write_second = true;
-	}
-	nor->sst_write_second = false;
-
-	ret = spi_nor_write_disable(nor);
-	if (ret)
-		goto out;
-
-	ret = spi_nor_wait_till_ready(nor);
-	if (ret)
-		goto out;
-
-	/* Write out trailing byte if it exists. */
-	if (actual != len) {
-		ret = spi_nor_write_enable(nor);
-		if (ret)
-			goto out;
-
-		nor->program_opcode = SPINOR_OP_BP;
-		ret = spi_nor_write_data(nor, to, 1, buf + actual);
-		if (ret < 0)
-			goto out;
-		WARN(ret != 1, "While writing 1 byte written %i bytes\n", ret);
-		ret = spi_nor_wait_till_ready(nor);
-		if (ret)
-			goto out;
-
-		actual += 1;
-
-		ret = spi_nor_write_disable(nor);
-	}
-out:
-	*retlen += actual;
-	spi_nor_unlock_and_unprep(nor);
-	return ret;
-}
-
-/*
- * Write an address range to the nor chip.  Data must be written in
- * FLASH_PAGESIZE chunks.  The address range may be any size provided
- * it is within the physical boundaries.
- */
-static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
-	size_t *retlen, const u_char *buf)
-{
-	struct spi_nor *nor = mtd_to_spi_nor(mtd);
-	size_t page_offset, page_remain, i;
-	ssize_t ret;
-
-	dev_dbg(nor->dev, "to 0x%08x, len %zd\n", (u32)to, len);
-
-	ret = spi_nor_lock_and_prep(nor);
-	if (ret)
-		return ret;
-
-	for (i = 0; i < len; ) {
-		ssize_t written;
-		loff_t addr = to + i;
-
-		/*
-		 * If page_size is a power of two, the offset can be quickly
-		 * calculated with an AND operation. On the other cases we
-		 * need to do a modulus operation (more expensive).
-		 * Power of two numbers have only one bit set and we can use
-		 * the instruction hweight32 to detect if we need to do a
-		 * modulus (do_div()) or not.
-		 */
-		if (hweight32(nor->page_size) == 1) {
-			page_offset = addr & (nor->page_size - 1);
-		} else {
-			uint64_t aux = addr;
-
-			page_offset = do_div(aux, nor->page_size);
-		}
-		/* the size of data remaining on the first page */
-		page_remain = min_t(size_t,
-				    nor->page_size - page_offset, len - i);
-
-		addr = spi_nor_convert_addr(nor, addr);
-
-		ret = spi_nor_write_enable(nor);
-		if (ret)
-			goto write_err;
-
-		ret = spi_nor_write_data(nor, addr, page_remain, buf + i);
-		if (ret < 0)
-			goto write_err;
-		written = ret;
-
-		ret = spi_nor_wait_till_ready(nor);
-		if (ret)
-			goto write_err;
-		*retlen += written;
-		i += written;
-	}
-
-write_err:
-	spi_nor_unlock_and_unprep(nor);
-	return ret;
-}
-
-static int spi_nor_check(struct spi_nor *nor)
-{
-	if (!nor->dev ||
-	    (!nor->spimem && !nor->controller_ops) ||
-	    (!nor->spimem && nor->controller_ops &&
-	    (!nor->controller_ops->read ||
-	     !nor->controller_ops->write ||
-	     !nor->controller_ops->read_reg ||
-	     !nor->controller_ops->write_reg))) {
-		pr_err("spi-nor: please fill all the necessary fields!\n");
-		return -EINVAL;
-	}
-
-	if (nor->spimem && nor->controller_ops) {
-		dev_err(nor->dev, "nor->spimem and nor->controller_ops are mutually exclusive, please set just one of them.\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int s3an_nor_setup(struct spi_nor *nor,
-			  const struct spi_nor_hwcaps *hwcaps)
-{
-	int ret;
-
-	ret = spi_nor_xread_sr(nor, nor->bouncebuf);
-	if (ret)
-		return ret;
-
-	nor->erase_opcode = SPINOR_OP_XSE;
-	nor->program_opcode = SPINOR_OP_XPP;
-	nor->read_opcode = SPINOR_OP_READ;
-	nor->flags |= SNOR_F_NO_OP_CHIP_ERASE;
-
-	/*
-	 * This flashes have a page size of 264 or 528 bytes (known as
-	 * Default addressing mode). It can be changed to a more standard
-	 * Power of two mode where the page size is 256/512. This comes
-	 * with a price: there is 3% less of space, the data is corrupted
-	 * and the page size cannot be changed back to default addressing
-	 * mode.
-	 *
-	 * The current addressing mode can be read from the XRDSR register
-	 * and should not be changed, because is a destructive operation.
-	 */
-	if (nor->bouncebuf[0] & XSR_PAGESIZE) {
-		/* Flash in Power of 2 mode */
-		nor->page_size = (nor->page_size == 264) ? 256 : 512;
-		nor->mtd.writebufsize = nor->page_size;
-		nor->mtd.size = 8 * nor->page_size * nor->info->n_sectors;
-		nor->mtd.erasesize = 8 * nor->page_size;
-	} else {
-		/* Flash in Default addressing mode */
-		nor->params.convert_addr = s3an_convert_addr;
-		nor->mtd.erasesize = nor->info->sector_size;
-	}
-
-	return 0;
-}
-
-static void
-spi_nor_set_read_settings(struct spi_nor_read_command *read,
-			  u8 num_mode_clocks,
-			  u8 num_wait_states,
-			  u8 opcode,
-			  enum spi_nor_protocol proto)
-{
-	read->num_mode_clocks = num_mode_clocks;
-	read->num_wait_states = num_wait_states;
-	read->opcode = opcode;
-	read->proto = proto;
-}
-
-static void
-spi_nor_set_pp_settings(struct spi_nor_pp_command *pp,
-			u8 opcode,
-			enum spi_nor_protocol proto)
-{
-	pp->opcode = opcode;
-	pp->proto = proto;
-}
-
-static int spi_nor_hwcaps2cmd(u32 hwcaps, const int table[][2], size_t size)
-{
-	size_t i;
-
-	for (i = 0; i < size; i++)
-		if (table[i][0] == (int)hwcaps)
-			return table[i][1];
-
-	return -EINVAL;
-}
-
-static int spi_nor_hwcaps_read2cmd(u32 hwcaps)
-{
-	static const int hwcaps_read2cmd[][2] = {
-		{ SNOR_HWCAPS_READ,		SNOR_CMD_READ },
-		{ SNOR_HWCAPS_READ_FAST,	SNOR_CMD_READ_FAST },
-		{ SNOR_HWCAPS_READ_1_1_1_DTR,	SNOR_CMD_READ_1_1_1_DTR },
-		{ SNOR_HWCAPS_READ_1_1_2,	SNOR_CMD_READ_1_1_2 },
-		{ SNOR_HWCAPS_READ_1_2_2,	SNOR_CMD_READ_1_2_2 },
-		{ SNOR_HWCAPS_READ_2_2_2,	SNOR_CMD_READ_2_2_2 },
-		{ SNOR_HWCAPS_READ_1_2_2_DTR,	SNOR_CMD_READ_1_2_2_DTR },
-		{ SNOR_HWCAPS_READ_1_1_4,	SNOR_CMD_READ_1_1_4 },
-		{ SNOR_HWCAPS_READ_1_4_4,	SNOR_CMD_READ_1_4_4 },
-		{ SNOR_HWCAPS_READ_4_4_4,	SNOR_CMD_READ_4_4_4 },
-		{ SNOR_HWCAPS_READ_1_4_4_DTR,	SNOR_CMD_READ_1_4_4_DTR },
-		{ SNOR_HWCAPS_READ_1_1_8,	SNOR_CMD_READ_1_1_8 },
-		{ SNOR_HWCAPS_READ_1_8_8,	SNOR_CMD_READ_1_8_8 },
-		{ SNOR_HWCAPS_READ_8_8_8,	SNOR_CMD_READ_8_8_8 },
-		{ SNOR_HWCAPS_READ_1_8_8_DTR,	SNOR_CMD_READ_1_8_8_DTR },
-	};
-
-	return spi_nor_hwcaps2cmd(hwcaps, hwcaps_read2cmd,
-				  ARRAY_SIZE(hwcaps_read2cmd));
-}
-
-static int spi_nor_hwcaps_pp2cmd(u32 hwcaps)
-{
-	static const int hwcaps_pp2cmd[][2] = {
-		{ SNOR_HWCAPS_PP,		SNOR_CMD_PP },
-		{ SNOR_HWCAPS_PP_1_1_4,		SNOR_CMD_PP_1_1_4 },
-		{ SNOR_HWCAPS_PP_1_4_4,		SNOR_CMD_PP_1_4_4 },
-		{ SNOR_HWCAPS_PP_4_4_4,		SNOR_CMD_PP_4_4_4 },
-		{ SNOR_HWCAPS_PP_1_1_8,		SNOR_CMD_PP_1_1_8 },
-		{ SNOR_HWCAPS_PP_1_8_8,		SNOR_CMD_PP_1_8_8 },
-		{ SNOR_HWCAPS_PP_8_8_8,		SNOR_CMD_PP_8_8_8 },
-	};
-
-	return spi_nor_hwcaps2cmd(hwcaps, hwcaps_pp2cmd,
-				  ARRAY_SIZE(hwcaps_pp2cmd));
-}
-
-/*
- * Serial Flash Discoverable Parameters (SFDP) parsing.
- */
-
-/**
- * spi_nor_read_raw() - raw read of serial flash memory. read_opcode,
- *			addr_width and read_dummy members of the struct spi_nor
- *			should be previously
- * set.
- * @nor:	pointer to a 'struct spi_nor'
- * @addr:	offset in the serial flash memory
- * @len:	number of bytes to read
- * @buf:	buffer where the data is copied into (dma-safe memory)
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_read_raw(struct spi_nor *nor, u32 addr, size_t len, u8 *buf)
-{
-	ssize_t ret;
-
-	while (len) {
-		ret = spi_nor_read_data(nor, addr, len, buf);
-		if (ret < 0)
-			return ret;
-		if (!ret || ret > len)
-			return -EIO;
-
-		buf += ret;
-		addr += ret;
-		len -= ret;
-	}
-	return 0;
-}
-
-/**
- * spi_nor_read_sfdp() - read Serial Flash Discoverable Parameters.
- * @nor:	pointer to a 'struct spi_nor'
- * @addr:	offset in the SFDP area to start reading data from
- * @len:	number of bytes to read
- * @buf:	buffer where the SFDP data are copied into (dma-safe memory)
- *
- * Whatever the actual numbers of bytes for address and dummy cycles are
- * for (Fast) Read commands, the Read SFDP (5Ah) instruction is always
- * followed by a 3-byte address and 8 dummy clock cycles.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_read_sfdp(struct spi_nor *nor, u32 addr,
-			     size_t len, void *buf)
-{
-	u8 addr_width, read_opcode, read_dummy;
-	int ret;
-
-	read_opcode = nor->read_opcode;
-	addr_width = nor->addr_width;
-	read_dummy = nor->read_dummy;
-
-	nor->read_opcode = SPINOR_OP_RDSFDP;
-	nor->addr_width = 3;
-	nor->read_dummy = 8;
-
-	ret = spi_nor_read_raw(nor, addr, len, buf);
-
-	nor->read_opcode = read_opcode;
-	nor->addr_width = addr_width;
-	nor->read_dummy = read_dummy;
-
-	return ret;
-}
-
-/**
- * spi_nor_spimem_check_op - check if the operation is supported
- *                           by controller
- *@nor:        pointer to a 'struct spi_nor'
- *@op:         pointer to op template to be checked
- *
- * Returns 0 if operation is supported, -ENOTSUPP otherwise.
- */
-static int spi_nor_spimem_check_op(struct spi_nor *nor,
-				   struct spi_mem_op *op)
-{
-	/*
-	 * First test with 4 address bytes. The opcode itself might
-	 * be a 3B addressing opcode but we don't care, because
-	 * SPI controller implementation should not check the opcode,
-	 * but just the sequence.
-	 */
-	op->addr.nbytes = 4;
-	if (!spi_mem_supports_op(nor->spimem, op)) {
-		if (nor->mtd.size > SZ_16M)
-			return -ENOTSUPP;
-
-		/* If flash size <= 16MB, 3 address bytes are sufficient */
-		op->addr.nbytes = 3;
-		if (!spi_mem_supports_op(nor->spimem, op))
-			return -ENOTSUPP;
-	}
-
-	return 0;
-}
-
-/**
- * spi_nor_spimem_check_readop - check if the read op is supported
- *                               by controller
- *@nor:         pointer to a 'struct spi_nor'
- *@read:        pointer to op template to be checked
- *
- * Returns 0 if operation is supported, -ENOTSUPP otherwise.
- */
-static int spi_nor_spimem_check_readop(struct spi_nor *nor,
-				       const struct spi_nor_read_command *read)
-{
-	struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(read->opcode, 1),
-					  SPI_MEM_OP_ADDR(3, 0, 1),
-					  SPI_MEM_OP_DUMMY(0, 1),
-					  SPI_MEM_OP_DATA_IN(0, NULL, 1));
-
-	op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(read->proto);
-	op.addr.buswidth = spi_nor_get_protocol_addr_nbits(read->proto);
-	op.data.buswidth = spi_nor_get_protocol_data_nbits(read->proto);
-	op.dummy.buswidth = op.addr.buswidth;
-	op.dummy.nbytes = (read->num_mode_clocks + read->num_wait_states) *
-			  op.dummy.buswidth / 8;
-
-	return spi_nor_spimem_check_op(nor, &op);
-}
-
-/**
- * spi_nor_spimem_check_pp - check if the page program op is supported
- *                           by controller
- *@nor:         pointer to a 'struct spi_nor'
- *@pp:          pointer to op template to be checked
- *
- * Returns 0 if operation is supported, -ENOTSUPP otherwise.
- */
-static int spi_nor_spimem_check_pp(struct spi_nor *nor,
-				   const struct spi_nor_pp_command *pp)
-{
-	struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(pp->opcode, 1),
-					  SPI_MEM_OP_ADDR(3, 0, 1),
-					  SPI_MEM_OP_NO_DUMMY,
-					  SPI_MEM_OP_DATA_OUT(0, NULL, 1));
-
-	op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(pp->proto);
-	op.addr.buswidth = spi_nor_get_protocol_addr_nbits(pp->proto);
-	op.data.buswidth = spi_nor_get_protocol_data_nbits(pp->proto);
-
-	return spi_nor_spimem_check_op(nor, &op);
-}
-
-/**
- * spi_nor_spimem_adjust_hwcaps - Find optimal Read/Write protocol
- *                                based on SPI controller capabilities
- * @nor:        pointer to a 'struct spi_nor'
- * @hwcaps:     pointer to resulting capabilities after adjusting
- *              according to controller and flash's capability
- */
-static void
-spi_nor_spimem_adjust_hwcaps(struct spi_nor *nor, u32 *hwcaps)
-{
-	struct spi_nor_flash_parameter *params =  &nor->params;
-	unsigned int cap;
-
-	/* DTR modes are not supported yet, mask them all. */
-	*hwcaps &= ~SNOR_HWCAPS_DTR;
-
-	/* X-X-X modes are not supported yet, mask them all. */
-	*hwcaps &= ~SNOR_HWCAPS_X_X_X;
-
-	for (cap = 0; cap < sizeof(*hwcaps) * BITS_PER_BYTE; cap++) {
-		int rdidx, ppidx;
-
-		if (!(*hwcaps & BIT(cap)))
-			continue;
-
-		rdidx = spi_nor_hwcaps_read2cmd(BIT(cap));
-		if (rdidx >= 0 &&
-		    spi_nor_spimem_check_readop(nor, &params->reads[rdidx]))
-			*hwcaps &= ~BIT(cap);
-
-		ppidx = spi_nor_hwcaps_pp2cmd(BIT(cap));
-		if (ppidx < 0)
-			continue;
-
-		if (spi_nor_spimem_check_pp(nor,
-					    &params->page_programs[ppidx]))
-			*hwcaps &= ~BIT(cap);
-	}
-}
-
-/**
- * spi_nor_read_sfdp_dma_unsafe() - read Serial Flash Discoverable Parameters.
- * @nor:	pointer to a 'struct spi_nor'
- * @addr:	offset in the SFDP area to start reading data from
- * @len:	number of bytes to read
- * @buf:	buffer where the SFDP data are copied into
- *
- * Wrap spi_nor_read_sfdp() using a kmalloc'ed bounce buffer as @buf is now not
- * guaranteed to be dma-safe.
- *
- * Return: -ENOMEM if kmalloc() fails, the return code of spi_nor_read_sfdp()
- *          otherwise.
- */
-static int spi_nor_read_sfdp_dma_unsafe(struct spi_nor *nor, u32 addr,
-					size_t len, void *buf)
-{
-	void *dma_safe_buf;
-	int ret;
-
-	dma_safe_buf = kmalloc(len, GFP_KERNEL);
-	if (!dma_safe_buf)
-		return -ENOMEM;
-
-	ret = spi_nor_read_sfdp(nor, addr, len, dma_safe_buf);
-	memcpy(buf, dma_safe_buf, len);
-	kfree(dma_safe_buf);
-
-	return ret;
-}
-
-/* Fast Read settings. */
-
-static void
-spi_nor_set_read_settings_from_bfpt(struct spi_nor_read_command *read,
-				    u16 half,
-				    enum spi_nor_protocol proto)
-{
-	read->num_mode_clocks = (half >> 5) & 0x07;
-	read->num_wait_states = (half >> 0) & 0x1f;
-	read->opcode = (half >> 8) & 0xff;
-	read->proto = proto;
-}
-
-struct sfdp_bfpt_read {
-	/* The Fast Read x-y-z hardware capability in params->hwcaps.mask. */
-	u32			hwcaps;
-
-	/*
-	 * The <supported_bit> bit in <supported_dword> BFPT DWORD tells us
-	 * whether the Fast Read x-y-z command is supported.
-	 */
-	u32			supported_dword;
-	u32			supported_bit;
-
-	/*
-	 * The half-word at offset <setting_shift> in <setting_dword> BFPT DWORD
-	 * encodes the op code, the number of mode clocks and the number of wait
-	 * states to be used by Fast Read x-y-z command.
-	 */
-	u32			settings_dword;
-	u32			settings_shift;
-
-	/* The SPI protocol for this Fast Read x-y-z command. */
-	enum spi_nor_protocol	proto;
-};
-
-static const struct sfdp_bfpt_read sfdp_bfpt_reads[] = {
-	/* Fast Read 1-1-2 */
-	{
-		SNOR_HWCAPS_READ_1_1_2,
-		BFPT_DWORD(1), BIT(16),	/* Supported bit */
-		BFPT_DWORD(4), 0,	/* Settings */
-		SNOR_PROTO_1_1_2,
-	},
-
-	/* Fast Read 1-2-2 */
-	{
-		SNOR_HWCAPS_READ_1_2_2,
-		BFPT_DWORD(1), BIT(20),	/* Supported bit */
-		BFPT_DWORD(4), 16,	/* Settings */
-		SNOR_PROTO_1_2_2,
-	},
-
-	/* Fast Read 2-2-2 */
-	{
-		SNOR_HWCAPS_READ_2_2_2,
-		BFPT_DWORD(5),  BIT(0),	/* Supported bit */
-		BFPT_DWORD(6), 16,	/* Settings */
-		SNOR_PROTO_2_2_2,
-	},
-
-	/* Fast Read 1-1-4 */
-	{
-		SNOR_HWCAPS_READ_1_1_4,
-		BFPT_DWORD(1), BIT(22),	/* Supported bit */
-		BFPT_DWORD(3), 16,	/* Settings */
-		SNOR_PROTO_1_1_4,
-	},
-
-	/* Fast Read 1-4-4 */
-	{
-		SNOR_HWCAPS_READ_1_4_4,
-		BFPT_DWORD(1), BIT(21),	/* Supported bit */
-		BFPT_DWORD(3), 0,	/* Settings */
-		SNOR_PROTO_1_4_4,
-	},
-
-	/* Fast Read 4-4-4 */
-	{
-		SNOR_HWCAPS_READ_4_4_4,
-		BFPT_DWORD(5), BIT(4),	/* Supported bit */
-		BFPT_DWORD(7), 16,	/* Settings */
-		SNOR_PROTO_4_4_4,
-	},
-};
-
-struct sfdp_bfpt_erase {
-	/*
-	 * The half-word at offset <shift> in DWORD <dwoard> encodes the
-	 * op code and erase sector size to be used by Sector Erase commands.
-	 */
-	u32			dword;
-	u32			shift;
-};
-
-static const struct sfdp_bfpt_erase sfdp_bfpt_erases[] = {
-	/* Erase Type 1 in DWORD8 bits[15:0] */
-	{BFPT_DWORD(8), 0},
-
-	/* Erase Type 2 in DWORD8 bits[31:16] */
-	{BFPT_DWORD(8), 16},
-
-	/* Erase Type 3 in DWORD9 bits[15:0] */
-	{BFPT_DWORD(9), 0},
-
-	/* Erase Type 4 in DWORD9 bits[31:16] */
-	{BFPT_DWORD(9), 16},
-};
-
-/**
- * spi_nor_set_erase_type() - set a SPI NOR erase type
- * @erase:	pointer to a structure that describes a SPI NOR erase type
- * @size:	the size of the sector/block erased by the erase type
- * @opcode:	the SPI command op code to erase the sector/block
- */
-static void spi_nor_set_erase_type(struct spi_nor_erase_type *erase,
-				   u32 size, u8 opcode)
-{
-	erase->size = size;
-	erase->opcode = opcode;
-	/* JEDEC JESD216B Standard imposes erase sizes to be power of 2. */
-	erase->size_shift = ffs(erase->size) - 1;
-	erase->size_mask = (1 << erase->size_shift) - 1;
-}
-
-/**
- * spi_nor_set_erase_settings_from_bfpt() - set erase type settings from BFPT
- * @erase:	pointer to a structure that describes a SPI NOR erase type
- * @size:	the size of the sector/block erased by the erase type
- * @opcode:	the SPI command op code to erase the sector/block
- * @i:		erase type index as sorted in the Basic Flash Parameter Table
- *
- * The supported Erase Types will be sorted at init in ascending order, with
- * the smallest Erase Type size being the first member in the erase_type array
- * of the spi_nor_erase_map structure. Save the Erase Type index as sorted in
- * the Basic Flash Parameter Table since it will be used later on to
- * synchronize with the supported Erase Types defined in SFDP optional tables.
- */
-static void
-spi_nor_set_erase_settings_from_bfpt(struct spi_nor_erase_type *erase,
-				     u32 size, u8 opcode, u8 i)
-{
-	erase->idx = i;
-	spi_nor_set_erase_type(erase, size, opcode);
-}
-
-/**
- * spi_nor_map_cmp_erase_type() - compare the map's erase types by size
- * @l:	member in the left half of the map's erase_type array
- * @r:	member in the right half of the map's erase_type array
- *
- * Comparison function used in the sort() call to sort in ascending order the
- * map's erase types, the smallest erase type size being the first member in the
- * sorted erase_type array.
- *
- * Return: the result of @l->size - @r->size
- */
-static int spi_nor_map_cmp_erase_type(const void *l, const void *r)
-{
-	const struct spi_nor_erase_type *left = l, *right = r;
-
-	return left->size - right->size;
-}
-
-/**
- * spi_nor_sort_erase_mask() - sort erase mask
- * @map:	the erase map of the SPI NOR
- * @erase_mask:	the erase type mask to be sorted
- *
- * Replicate the sort done for the map's erase types in BFPT: sort the erase
- * mask in ascending order with the smallest erase type size starting from
- * BIT(0) in the sorted erase mask.
- *
- * Return: sorted erase mask.
- */
-static u8 spi_nor_sort_erase_mask(struct spi_nor_erase_map *map, u8 erase_mask)
-{
-	struct spi_nor_erase_type *erase_type = map->erase_type;
-	int i;
-	u8 sorted_erase_mask = 0;
-
-	if (!erase_mask)
-		return 0;
-
-	/* Replicate the sort done for the map's erase types. */
-	for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++)
-		if (erase_type[i].size && erase_mask & BIT(erase_type[i].idx))
-			sorted_erase_mask |= BIT(i);
-
-	return sorted_erase_mask;
-}
-
-/**
- * spi_nor_regions_sort_erase_types() - sort erase types in each region
- * @map:	the erase map of the SPI NOR
- *
- * Function assumes that the erase types defined in the erase map are already
- * sorted in ascending order, with the smallest erase type size being the first
- * member in the erase_type array. It replicates the sort done for the map's
- * erase types. Each region's erase bitmask will indicate which erase types are
- * supported from the sorted erase types defined in the erase map.
- * Sort the all region's erase type at init in order to speed up the process of
- * finding the best erase command at runtime.
- */
-static void spi_nor_regions_sort_erase_types(struct spi_nor_erase_map *map)
-{
-	struct spi_nor_erase_region *region = map->regions;
-	u8 region_erase_mask, sorted_erase_mask;
-
-	while (region) {
-		region_erase_mask = region->offset & SNOR_ERASE_TYPE_MASK;
-
-		sorted_erase_mask = spi_nor_sort_erase_mask(map,
-							    region_erase_mask);
-
-		/* Overwrite erase mask. */
-		region->offset = (region->offset & ~SNOR_ERASE_TYPE_MASK) |
-				 sorted_erase_mask;
-
-		region = spi_nor_region_next(region);
-	}
-}
-
-/**
- * spi_nor_init_uniform_erase_map() - Initialize uniform erase map
- * @map:		the erase map of the SPI NOR
- * @erase_mask:		bitmask encoding erase types that can erase the entire
- *			flash memory
- * @flash_size:		the spi nor flash memory size
- */
-static void spi_nor_init_uniform_erase_map(struct spi_nor_erase_map *map,
-					   u8 erase_mask, u64 flash_size)
-{
-	/* Offset 0 with erase_mask and SNOR_LAST_REGION bit set */
-	map->uniform_region.offset = (erase_mask & SNOR_ERASE_TYPE_MASK) |
-				     SNOR_LAST_REGION;
-	map->uniform_region.size = flash_size;
-	map->regions = &map->uniform_region;
-	map->uniform_erase_type = erase_mask;
-}
-
-static int
-spi_nor_post_bfpt_fixups(struct spi_nor *nor,
-			 const struct sfdp_parameter_header *bfpt_header,
-			 const struct sfdp_bfpt *bfpt,
-			 struct spi_nor_flash_parameter *params)
-{
-	if (nor->info->fixups && nor->info->fixups->post_bfpt)
-		return nor->info->fixups->post_bfpt(nor, bfpt_header, bfpt,
-						    params);
-
-	return 0;
-}
-
-/**
- * spi_nor_parse_bfpt() - read and parse the Basic Flash Parameter Table.
- * @nor:		pointer to a 'struct spi_nor'
- * @bfpt_header:	pointer to the 'struct sfdp_parameter_header' describing
- *			the Basic Flash Parameter Table length and version
- * @params:		pointer to the 'struct spi_nor_flash_parameter' to be
- *			filled
- *
- * The Basic Flash Parameter Table is the main and only mandatory table as
- * defined by the SFDP (JESD216) specification.
- * It provides us with the total size (memory density) of the data array and
- * the number of address bytes for Fast Read, Page Program and Sector Erase
- * commands.
- * For Fast READ commands, it also gives the number of mode clock cycles and
- * wait states (regrouped in the number of dummy clock cycles) for each
- * supported instruction op code.
- * For Page Program, the page size is now available since JESD216 rev A, however
- * the supported instruction op codes are still not provided.
- * For Sector Erase commands, this table stores the supported instruction op
- * codes and the associated sector sizes.
- * Finally, the Quad Enable Requirements (QER) are also available since JESD216
- * rev A. The QER bits encode the manufacturer dependent procedure to be
- * executed to set the Quad Enable (QE) bit in some internal register of the
- * Quad SPI memory. Indeed the QE bit, when it exists, must be set before
- * sending any Quad SPI command to the memory. Actually, setting the QE bit
- * tells the memory to reassign its WP# and HOLD#/RESET# pins to functions IO2
- * and IO3 hence enabling 4 (Quad) I/O lines.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_parse_bfpt(struct spi_nor *nor,
-			      const struct sfdp_parameter_header *bfpt_header,
-			      struct spi_nor_flash_parameter *params)
-{
-	struct spi_nor_erase_map *map = &params->erase_map;
-	struct spi_nor_erase_type *erase_type = map->erase_type;
-	struct sfdp_bfpt bfpt;
-	size_t len;
-	int i, cmd, err;
-	u32 addr;
-	u16 half;
-	u8 erase_mask;
-
-	/* JESD216 Basic Flash Parameter Table length is at least 9 DWORDs. */
-	if (bfpt_header->length < BFPT_DWORD_MAX_JESD216)
-		return -EINVAL;
-
-	/* Read the Basic Flash Parameter Table. */
-	len = min_t(size_t, sizeof(bfpt),
-		    bfpt_header->length * sizeof(u32));
-	addr = SFDP_PARAM_HEADER_PTP(bfpt_header);
-	memset(&bfpt, 0, sizeof(bfpt));
-	err = spi_nor_read_sfdp_dma_unsafe(nor,  addr, len, &bfpt);
-	if (err < 0)
-		return err;
-
-	/* Fix endianness of the BFPT DWORDs. */
-	for (i = 0; i < BFPT_DWORD_MAX; i++)
-		bfpt.dwords[i] = le32_to_cpu(bfpt.dwords[i]);
-
-	/* Number of address bytes. */
-	switch (bfpt.dwords[BFPT_DWORD(1)] & BFPT_DWORD1_ADDRESS_BYTES_MASK) {
-	case BFPT_DWORD1_ADDRESS_BYTES_3_ONLY:
-		nor->addr_width = 3;
-		break;
-
-	case BFPT_DWORD1_ADDRESS_BYTES_4_ONLY:
-		nor->addr_width = 4;
-		break;
-
-	default:
-		break;
-	}
-
-	/* Flash Memory Density (in bits). */
-	params->size = bfpt.dwords[BFPT_DWORD(2)];
-	if (params->size & BIT(31)) {
-		params->size &= ~BIT(31);
-
-		/*
-		 * Prevent overflows on params->size. Anyway, a NOR of 2^64
-		 * bits is unlikely to exist so this error probably means
-		 * the BFPT we are reading is corrupted/wrong.
-		 */
-		if (params->size > 63)
-			return -EINVAL;
-
-		params->size = 1ULL << params->size;
-	} else {
-		params->size++;
-	}
-	params->size >>= 3; /* Convert to bytes. */
-
-	/* Fast Read settings. */
-	for (i = 0; i < ARRAY_SIZE(sfdp_bfpt_reads); i++) {
-		const struct sfdp_bfpt_read *rd = &sfdp_bfpt_reads[i];
-		struct spi_nor_read_command *read;
-
-		if (!(bfpt.dwords[rd->supported_dword] & rd->supported_bit)) {
-			params->hwcaps.mask &= ~rd->hwcaps;
-			continue;
-		}
-
-		params->hwcaps.mask |= rd->hwcaps;
-		cmd = spi_nor_hwcaps_read2cmd(rd->hwcaps);
-		read = &params->reads[cmd];
-		half = bfpt.dwords[rd->settings_dword] >> rd->settings_shift;
-		spi_nor_set_read_settings_from_bfpt(read, half, rd->proto);
-	}
-
-	/*
-	 * Sector Erase settings. Reinitialize the uniform erase map using the
-	 * Erase Types defined in the bfpt table.
-	 */
-	erase_mask = 0;
-	memset(&params->erase_map, 0, sizeof(params->erase_map));
-	for (i = 0; i < ARRAY_SIZE(sfdp_bfpt_erases); i++) {
-		const struct sfdp_bfpt_erase *er = &sfdp_bfpt_erases[i];
-		u32 erasesize;
-		u8 opcode;
-
-		half = bfpt.dwords[er->dword] >> er->shift;
-		erasesize = half & 0xff;
-
-		/* erasesize == 0 means this Erase Type is not supported. */
-		if (!erasesize)
-			continue;
-
-		erasesize = 1U << erasesize;
-		opcode = (half >> 8) & 0xff;
-		erase_mask |= BIT(i);
-		spi_nor_set_erase_settings_from_bfpt(&erase_type[i], erasesize,
-						     opcode, i);
-	}
-	spi_nor_init_uniform_erase_map(map, erase_mask, params->size);
-	/*
-	 * Sort all the map's Erase Types in ascending order with the smallest
-	 * erase size being the first member in the erase_type array.
-	 */
-	sort(erase_type, SNOR_ERASE_TYPE_MAX, sizeof(erase_type[0]),
-	     spi_nor_map_cmp_erase_type, NULL);
-	/*
-	 * Sort the erase types in the uniform region in order to update the
-	 * uniform_erase_type bitmask. The bitmask will be used later on when
-	 * selecting the uniform erase.
-	 */
-	spi_nor_regions_sort_erase_types(map);
-	map->uniform_erase_type = map->uniform_region.offset &
-				  SNOR_ERASE_TYPE_MASK;
-
-	/* Stop here if not JESD216 rev A or later. */
-	if (bfpt_header->length < BFPT_DWORD_MAX)
-		return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt,
-						params);
-
-	/* Page size: this field specifies 'N' so the page size = 2^N bytes. */
-	params->page_size = bfpt.dwords[BFPT_DWORD(11)];
-	params->page_size &= BFPT_DWORD11_PAGE_SIZE_MASK;
-	params->page_size >>= BFPT_DWORD11_PAGE_SIZE_SHIFT;
-	params->page_size = 1U << params->page_size;
-
-	/* Quad Enable Requirements. */
-	switch (bfpt.dwords[BFPT_DWORD(15)] & BFPT_DWORD15_QER_MASK) {
-	case BFPT_DWORD15_QER_NONE:
-		params->quad_enable = NULL;
-		break;
-
-	case BFPT_DWORD15_QER_SR2_BIT1_BUGGY:
-		/*
-		 * Writing only one byte to the Status Register has the
-		 * side-effect of clearing Status Register 2.
-		 */
-	case BFPT_DWORD15_QER_SR2_BIT1_NO_RD:
-		/*
-		 * Read Configuration Register (35h) instruction is not
-		 * supported.
-		 */
-		nor->flags |= SNOR_F_HAS_16BIT_SR | SNOR_F_NO_READ_CR;
-		params->quad_enable = spi_nor_sr2_bit1_quad_enable;
-		break;
-
-	case BFPT_DWORD15_QER_SR1_BIT6:
-		nor->flags &= ~SNOR_F_HAS_16BIT_SR;
-		params->quad_enable = spi_nor_sr1_bit6_quad_enable;
-		break;
-
-	case BFPT_DWORD15_QER_SR2_BIT7:
-		nor->flags &= ~SNOR_F_HAS_16BIT_SR;
-		params->quad_enable = spi_nor_sr2_bit7_quad_enable;
-		break;
-
-	case BFPT_DWORD15_QER_SR2_BIT1:
-		/*
-		 * JESD216 rev B or later does not specify if writing only one
-		 * byte to the Status Register clears or not the Status
-		 * Register 2, so let's be cautious and keep the default
-		 * assumption of a 16-bit Write Status (01h) command.
-		 */
-		nor->flags |= SNOR_F_HAS_16BIT_SR;
-
-		params->quad_enable = spi_nor_sr2_bit1_quad_enable;
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt, params);
-}
-
-#define SMPT_CMD_ADDRESS_LEN_MASK		GENMASK(23, 22)
-#define SMPT_CMD_ADDRESS_LEN_0			(0x0UL << 22)
-#define SMPT_CMD_ADDRESS_LEN_3			(0x1UL << 22)
-#define SMPT_CMD_ADDRESS_LEN_4			(0x2UL << 22)
-#define SMPT_CMD_ADDRESS_LEN_USE_CURRENT	(0x3UL << 22)
-
-#define SMPT_CMD_READ_DUMMY_MASK		GENMASK(19, 16)
-#define SMPT_CMD_READ_DUMMY_SHIFT		16
-#define SMPT_CMD_READ_DUMMY(_cmd) \
-	(((_cmd) & SMPT_CMD_READ_DUMMY_MASK) >> SMPT_CMD_READ_DUMMY_SHIFT)
-#define SMPT_CMD_READ_DUMMY_IS_VARIABLE		0xfUL
-
-#define SMPT_CMD_READ_DATA_MASK			GENMASK(31, 24)
-#define SMPT_CMD_READ_DATA_SHIFT		24
-#define SMPT_CMD_READ_DATA(_cmd) \
-	(((_cmd) & SMPT_CMD_READ_DATA_MASK) >> SMPT_CMD_READ_DATA_SHIFT)
-
-#define SMPT_CMD_OPCODE_MASK			GENMASK(15, 8)
-#define SMPT_CMD_OPCODE_SHIFT			8
-#define SMPT_CMD_OPCODE(_cmd) \
-	(((_cmd) & SMPT_CMD_OPCODE_MASK) >> SMPT_CMD_OPCODE_SHIFT)
-
-#define SMPT_MAP_REGION_COUNT_MASK		GENMASK(23, 16)
-#define SMPT_MAP_REGION_COUNT_SHIFT		16
-#define SMPT_MAP_REGION_COUNT(_header) \
-	((((_header) & SMPT_MAP_REGION_COUNT_MASK) >> \
-	  SMPT_MAP_REGION_COUNT_SHIFT) + 1)
-
-#define SMPT_MAP_ID_MASK			GENMASK(15, 8)
-#define SMPT_MAP_ID_SHIFT			8
-#define SMPT_MAP_ID(_header) \
-	(((_header) & SMPT_MAP_ID_MASK) >> SMPT_MAP_ID_SHIFT)
-
-#define SMPT_MAP_REGION_SIZE_MASK		GENMASK(31, 8)
-#define SMPT_MAP_REGION_SIZE_SHIFT		8
-#define SMPT_MAP_REGION_SIZE(_region) \
-	(((((_region) & SMPT_MAP_REGION_SIZE_MASK) >> \
-	   SMPT_MAP_REGION_SIZE_SHIFT) + 1) * 256)
-
-#define SMPT_MAP_REGION_ERASE_TYPE_MASK		GENMASK(3, 0)
-#define SMPT_MAP_REGION_ERASE_TYPE(_region) \
-	((_region) & SMPT_MAP_REGION_ERASE_TYPE_MASK)
-
-#define SMPT_DESC_TYPE_MAP			BIT(1)
-#define SMPT_DESC_END				BIT(0)
-
-/**
- * spi_nor_smpt_addr_width() - return the address width used in the
- *			       configuration detection command.
- * @nor:	pointer to a 'struct spi_nor'
- * @settings:	configuration detection command descriptor, dword1
- */
-static u8 spi_nor_smpt_addr_width(const struct spi_nor *nor, const u32 settings)
-{
-	switch (settings & SMPT_CMD_ADDRESS_LEN_MASK) {
-	case SMPT_CMD_ADDRESS_LEN_0:
-		return 0;
-	case SMPT_CMD_ADDRESS_LEN_3:
-		return 3;
-	case SMPT_CMD_ADDRESS_LEN_4:
-		return 4;
-	case SMPT_CMD_ADDRESS_LEN_USE_CURRENT:
-		/* fall through */
-	default:
-		return nor->addr_width;
-	}
-}
-
-/**
- * spi_nor_smpt_read_dummy() - return the configuration detection command read
- *			       latency, in clock cycles.
- * @nor:	pointer to a 'struct spi_nor'
- * @settings:	configuration detection command descriptor, dword1
- *
- * Return: the number of dummy cycles for an SMPT read
- */
-static u8 spi_nor_smpt_read_dummy(const struct spi_nor *nor, const u32 settings)
-{
-	u8 read_dummy = SMPT_CMD_READ_DUMMY(settings);
-
-	if (read_dummy == SMPT_CMD_READ_DUMMY_IS_VARIABLE)
-		return nor->read_dummy;
-	return read_dummy;
-}
-
-/**
- * spi_nor_get_map_in_use() - get the configuration map in use
- * @nor:	pointer to a 'struct spi_nor'
- * @smpt:	pointer to the sector map parameter table
- * @smpt_len:	sector map parameter table length
- *
- * Return: pointer to the map in use, ERR_PTR(-errno) otherwise.
- */
-static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt,
-					 u8 smpt_len)
-{
-	const u32 *ret;
-	u8 *buf;
-	u32 addr;
-	int err;
-	u8 i;
-	u8 addr_width, read_opcode, read_dummy;
-	u8 read_data_mask, map_id;
-
-	/* Use a kmalloc'ed bounce buffer to guarantee it is DMA-able. */
-	buf = kmalloc(sizeof(*buf), GFP_KERNEL);
-	if (!buf)
-		return ERR_PTR(-ENOMEM);
-
-	addr_width = nor->addr_width;
-	read_dummy = nor->read_dummy;
-	read_opcode = nor->read_opcode;
-
-	map_id = 0;
-	/* Determine if there are any optional Detection Command Descriptors */
-	for (i = 0; i < smpt_len; i += 2) {
-		if (smpt[i] & SMPT_DESC_TYPE_MAP)
-			break;
-
-		read_data_mask = SMPT_CMD_READ_DATA(smpt[i]);
-		nor->addr_width = spi_nor_smpt_addr_width(nor, smpt[i]);
-		nor->read_dummy = spi_nor_smpt_read_dummy(nor, smpt[i]);
-		nor->read_opcode = SMPT_CMD_OPCODE(smpt[i]);
-		addr = smpt[i + 1];
-
-		err = spi_nor_read_raw(nor, addr, 1, buf);
-		if (err) {
-			ret = ERR_PTR(err);
-			goto out;
-		}
-
-		/*
-		 * Build an index value that is used to select the Sector Map
-		 * Configuration that is currently in use.
-		 */
-		map_id = map_id << 1 | !!(*buf & read_data_mask);
-	}
-
-	/*
-	 * If command descriptors are provided, they always precede map
-	 * descriptors in the table. There is no need to start the iteration
-	 * over smpt array all over again.
-	 *
-	 * Find the matching configuration map.
-	 */
-	ret = ERR_PTR(-EINVAL);
-	while (i < smpt_len) {
-		if (SMPT_MAP_ID(smpt[i]) == map_id) {
-			ret = smpt + i;
-			break;
-		}
-
-		/*
-		 * If there are no more configuration map descriptors and no
-		 * configuration ID matched the configuration identifier, the
-		 * sector address map is unknown.
-		 */
-		if (smpt[i] & SMPT_DESC_END)
-			break;
-
-		/* increment the table index to the next map */
-		i += SMPT_MAP_REGION_COUNT(smpt[i]) + 1;
-	}
-
-	/* fall through */
-out:
-	kfree(buf);
-	nor->addr_width = addr_width;
-	nor->read_dummy = read_dummy;
-	nor->read_opcode = read_opcode;
-	return ret;
-}
-
-/**
- * spi_nor_region_check_overlay() - set overlay bit when the region is overlaid
- * @region:	pointer to a structure that describes a SPI NOR erase region
- * @erase:	pointer to a structure that describes a SPI NOR erase type
- * @erase_type:	erase type bitmask
- */
-static void
-spi_nor_region_check_overlay(struct spi_nor_erase_region *region,
-			     const struct spi_nor_erase_type *erase,
-			     const u8 erase_type)
-{
-	int i;
-
-	for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) {
-		if (!(erase_type & BIT(i)))
-			continue;
-		if (region->size & erase[i].size_mask) {
-			spi_nor_region_mark_overlay(region);
-			return;
-		}
-	}
-}
-
-/**
- * spi_nor_init_non_uniform_erase_map() - initialize the non-uniform erase map
- * @nor:	pointer to a 'struct spi_nor'
- * @params:     pointer to a duplicate 'struct spi_nor_flash_parameter' that is
- *              used for storing SFDP parsed data
- * @smpt:	pointer to the sector map parameter table
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int
-spi_nor_init_non_uniform_erase_map(struct spi_nor *nor,
-				   struct spi_nor_flash_parameter *params,
-				   const u32 *smpt)
-{
-	struct spi_nor_erase_map *map = &params->erase_map;
-	struct spi_nor_erase_type *erase = map->erase_type;
-	struct spi_nor_erase_region *region;
-	u64 offset;
-	u32 region_count;
-	int i, j;
-	u8 uniform_erase_type, save_uniform_erase_type;
-	u8 erase_type, regions_erase_type;
-
-	region_count = SMPT_MAP_REGION_COUNT(*smpt);
-	/*
-	 * The regions will be freed when the driver detaches from the
-	 * device.
-	 */
-	region = devm_kcalloc(nor->dev, region_count, sizeof(*region),
-			      GFP_KERNEL);
-	if (!region)
-		return -ENOMEM;
-	map->regions = region;
-
-	uniform_erase_type = 0xff;
-	regions_erase_type = 0;
-	offset = 0;
-	/* Populate regions. */
-	for (i = 0; i < region_count; i++) {
-		j = i + 1; /* index for the region dword */
-		region[i].size = SMPT_MAP_REGION_SIZE(smpt[j]);
-		erase_type = SMPT_MAP_REGION_ERASE_TYPE(smpt[j]);
-		region[i].offset = offset | erase_type;
-
-		spi_nor_region_check_overlay(&region[i], erase, erase_type);
-
-		/*
-		 * Save the erase types that are supported in all regions and
-		 * can erase the entire flash memory.
-		 */
-		uniform_erase_type &= erase_type;
-
-		/*
-		 * regions_erase_type mask will indicate all the erase types
-		 * supported in this configuration map.
-		 */
-		regions_erase_type |= erase_type;
-
-		offset = (region[i].offset & ~SNOR_ERASE_FLAGS_MASK) +
-			 region[i].size;
-	}
-
-	save_uniform_erase_type = map->uniform_erase_type;
-	map->uniform_erase_type = spi_nor_sort_erase_mask(map,
-							  uniform_erase_type);
-
-	if (!regions_erase_type) {
-		/*
-		 * Roll back to the previous uniform_erase_type mask, SMPT is
-		 * broken.
-		 */
-		map->uniform_erase_type = save_uniform_erase_type;
-		return -EINVAL;
-	}
-
-	/*
-	 * BFPT advertises all the erase types supported by all the possible
-	 * map configurations. Mask out the erase types that are not supported
-	 * by the current map configuration.
-	 */
-	for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++)
-		if (!(regions_erase_type & BIT(erase[i].idx)))
-			spi_nor_set_erase_type(&erase[i], 0, 0xFF);
-
-	spi_nor_region_mark_end(&region[i - 1]);
-
-	return 0;
-}
-
-/**
- * spi_nor_parse_smpt() - parse Sector Map Parameter Table
- * @nor:		pointer to a 'struct spi_nor'
- * @smpt_header:	sector map parameter table header
- * @params:		pointer to a duplicate 'struct spi_nor_flash_parameter'
- *                      that is used for storing SFDP parsed data
- *
- * This table is optional, but when available, we parse it to identify the
- * location and size of sectors within the main data array of the flash memory
- * device and to identify which Erase Types are supported by each sector.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_parse_smpt(struct spi_nor *nor,
-			      const struct sfdp_parameter_header *smpt_header,
-			      struct spi_nor_flash_parameter *params)
-{
-	const u32 *sector_map;
-	u32 *smpt;
-	size_t len;
-	u32 addr;
-	int i, ret;
-
-	/* Read the Sector Map Parameter Table. */
-	len = smpt_header->length * sizeof(*smpt);
-	smpt = kmalloc(len, GFP_KERNEL);
-	if (!smpt)
-		return -ENOMEM;
-
-	addr = SFDP_PARAM_HEADER_PTP(smpt_header);
-	ret = spi_nor_read_sfdp(nor, addr, len, smpt);
-	if (ret)
-		goto out;
-
-	/* Fix endianness of the SMPT DWORDs. */
-	for (i = 0; i < smpt_header->length; i++)
-		smpt[i] = le32_to_cpu(smpt[i]);
-
-	sector_map = spi_nor_get_map_in_use(nor, smpt, smpt_header->length);
-	if (IS_ERR(sector_map)) {
-		ret = PTR_ERR(sector_map);
-		goto out;
-	}
-
-	ret = spi_nor_init_non_uniform_erase_map(nor, params, sector_map);
-	if (ret)
-		goto out;
-
-	spi_nor_regions_sort_erase_types(&params->erase_map);
-	/* fall through */
-out:
-	kfree(smpt);
-	return ret;
-}
-
-#define SFDP_4BAIT_DWORD_MAX	2
-
-struct sfdp_4bait {
-	/* The hardware capability. */
-	u32		hwcaps;
-
-	/*
-	 * The <supported_bit> bit in DWORD1 of the 4BAIT tells us whether
-	 * the associated 4-byte address op code is supported.
-	 */
-	u32		supported_bit;
-};
-
-/**
- * spi_nor_parse_4bait() - parse the 4-Byte Address Instruction Table
- * @nor:		pointer to a 'struct spi_nor'.
- * @param_header:	pointer to the 'struct sfdp_parameter_header' describing
- *			the 4-Byte Address Instruction Table length and version.
- * @params:		pointer to the 'struct spi_nor_flash_parameter' to be.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_parse_4bait(struct spi_nor *nor,
-			       const struct sfdp_parameter_header *param_header,
-			       struct spi_nor_flash_parameter *params)
-{
-	static const struct sfdp_4bait reads[] = {
-		{ SNOR_HWCAPS_READ,		BIT(0) },
-		{ SNOR_HWCAPS_READ_FAST,	BIT(1) },
-		{ SNOR_HWCAPS_READ_1_1_2,	BIT(2) },
-		{ SNOR_HWCAPS_READ_1_2_2,	BIT(3) },
-		{ SNOR_HWCAPS_READ_1_1_4,	BIT(4) },
-		{ SNOR_HWCAPS_READ_1_4_4,	BIT(5) },
-		{ SNOR_HWCAPS_READ_1_1_1_DTR,	BIT(13) },
-		{ SNOR_HWCAPS_READ_1_2_2_DTR,	BIT(14) },
-		{ SNOR_HWCAPS_READ_1_4_4_DTR,	BIT(15) },
-	};
-	static const struct sfdp_4bait programs[] = {
-		{ SNOR_HWCAPS_PP,		BIT(6) },
-		{ SNOR_HWCAPS_PP_1_1_4,		BIT(7) },
-		{ SNOR_HWCAPS_PP_1_4_4,		BIT(8) },
-	};
-	static const struct sfdp_4bait erases[SNOR_ERASE_TYPE_MAX] = {
-		{ 0u /* not used */,		BIT(9) },
-		{ 0u /* not used */,		BIT(10) },
-		{ 0u /* not used */,		BIT(11) },
-		{ 0u /* not used */,		BIT(12) },
-	};
-	struct spi_nor_pp_command *params_pp = params->page_programs;
-	struct spi_nor_erase_map *map = &params->erase_map;
-	struct spi_nor_erase_type *erase_type = map->erase_type;
-	u32 *dwords;
-	size_t len;
-	u32 addr, discard_hwcaps, read_hwcaps, pp_hwcaps, erase_mask;
-	int i, ret;
-
-	if (param_header->major != SFDP_JESD216_MAJOR ||
-	    param_header->length < SFDP_4BAIT_DWORD_MAX)
-		return -EINVAL;
-
-	/* Read the 4-byte Address Instruction Table. */
-	len = sizeof(*dwords) * SFDP_4BAIT_DWORD_MAX;
-
-	/* Use a kmalloc'ed bounce buffer to guarantee it is DMA-able. */
-	dwords = kmalloc(len, GFP_KERNEL);
-	if (!dwords)
-		return -ENOMEM;
-
-	addr = SFDP_PARAM_HEADER_PTP(param_header);
-	ret = spi_nor_read_sfdp(nor, addr, len, dwords);
-	if (ret)
-		goto out;
-
-	/* Fix endianness of the 4BAIT DWORDs. */
-	for (i = 0; i < SFDP_4BAIT_DWORD_MAX; i++)
-		dwords[i] = le32_to_cpu(dwords[i]);
-
-	/*
-	 * Compute the subset of (Fast) Read commands for which the 4-byte
-	 * version is supported.
-	 */
-	discard_hwcaps = 0;
-	read_hwcaps = 0;
-	for (i = 0; i < ARRAY_SIZE(reads); i++) {
-		const struct sfdp_4bait *read = &reads[i];
-
-		discard_hwcaps |= read->hwcaps;
-		if ((params->hwcaps.mask & read->hwcaps) &&
-		    (dwords[0] & read->supported_bit))
-			read_hwcaps |= read->hwcaps;
-	}
-
-	/*
-	 * Compute the subset of Page Program commands for which the 4-byte
-	 * version is supported.
-	 */
-	pp_hwcaps = 0;
-	for (i = 0; i < ARRAY_SIZE(programs); i++) {
-		const struct sfdp_4bait *program = &programs[i];
-
-		/*
-		 * The 4 Byte Address Instruction (Optional) Table is the only
-		 * SFDP table that indicates support for Page Program Commands.
-		 * Bypass the params->hwcaps.mask and consider 4BAIT the biggest
-		 * authority for specifying Page Program support.
-		 */
-		discard_hwcaps |= program->hwcaps;
-		if (dwords[0] & program->supported_bit)
-			pp_hwcaps |= program->hwcaps;
-	}
-
-	/*
-	 * Compute the subset of Sector Erase commands for which the 4-byte
-	 * version is supported.
-	 */
-	erase_mask = 0;
-	for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) {
-		const struct sfdp_4bait *erase = &erases[i];
-
-		if (dwords[0] & erase->supported_bit)
-			erase_mask |= BIT(i);
-	}
-
-	/* Replicate the sort done for the map's erase types in BFPT. */
-	erase_mask = spi_nor_sort_erase_mask(map, erase_mask);
-
-	/*
-	 * We need at least one 4-byte op code per read, program and erase
-	 * operation; the .read(), .write() and .erase() hooks share the
-	 * nor->addr_width value.
-	 */
-	if (!read_hwcaps || !pp_hwcaps || !erase_mask)
-		goto out;
-
-	/*
-	 * Discard all operations from the 4-byte instruction set which are
-	 * not supported by this memory.
-	 */
-	params->hwcaps.mask &= ~discard_hwcaps;
-	params->hwcaps.mask |= (read_hwcaps | pp_hwcaps);
-
-	/* Use the 4-byte address instruction set. */
-	for (i = 0; i < SNOR_CMD_READ_MAX; i++) {
-		struct spi_nor_read_command *read_cmd = &params->reads[i];
-
-		read_cmd->opcode = spi_nor_convert_3to4_read(read_cmd->opcode);
-	}
-
-	/* 4BAIT is the only SFDP table that indicates page program support. */
-	if (pp_hwcaps & SNOR_HWCAPS_PP)
-		spi_nor_set_pp_settings(&params_pp[SNOR_CMD_PP],
-					SPINOR_OP_PP_4B, SNOR_PROTO_1_1_1);
-	if (pp_hwcaps & SNOR_HWCAPS_PP_1_1_4)
-		spi_nor_set_pp_settings(&params_pp[SNOR_CMD_PP_1_1_4],
-					SPINOR_OP_PP_1_1_4_4B,
-					SNOR_PROTO_1_1_4);
-	if (pp_hwcaps & SNOR_HWCAPS_PP_1_4_4)
-		spi_nor_set_pp_settings(&params_pp[SNOR_CMD_PP_1_4_4],
-					SPINOR_OP_PP_1_4_4_4B,
-					SNOR_PROTO_1_4_4);
-
-	for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) {
-		if (erase_mask & BIT(i))
-			erase_type[i].opcode = (dwords[1] >>
-						erase_type[i].idx * 8) & 0xFF;
-		else
-			spi_nor_set_erase_type(&erase_type[i], 0u, 0xFF);
-	}
-
-	/*
-	 * We set SNOR_F_HAS_4BAIT in order to skip spi_nor_set_4byte_opcodes()
-	 * later because we already did the conversion to 4byte opcodes. Also,
-	 * this latest function implements a legacy quirk for the erase size of
-	 * Spansion memory. However this quirk is no longer needed with new
-	 * SFDP compliant memories.
-	 */
-	nor->addr_width = 4;
-	nor->flags |= SNOR_F_4B_OPCODES | SNOR_F_HAS_4BAIT;
-
-	/* fall through */
-out:
-	kfree(dwords);
-	return ret;
-}
-
-/**
- * spi_nor_parse_sfdp() - parse the Serial Flash Discoverable Parameters.
- * @nor:		pointer to a 'struct spi_nor'
- * @params:		pointer to the 'struct spi_nor_flash_parameter' to be
- *			filled
- *
- * The Serial Flash Discoverable Parameters are described by the JEDEC JESD216
- * specification. This is a standard which tends to supported by almost all
- * (Q)SPI memory manufacturers. Those hard-coded tables allow us to learn at
- * runtime the main parameters needed to perform basic SPI flash operations such
- * as Fast Read, Page Program or Sector Erase commands.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_parse_sfdp(struct spi_nor *nor,
-			      struct spi_nor_flash_parameter *params)
-{
-	const struct sfdp_parameter_header *param_header, *bfpt_header;
-	struct sfdp_parameter_header *param_headers = NULL;
-	struct sfdp_header header;
-	struct device *dev = nor->dev;
-	size_t psize;
-	int i, err;
-
-	/* Get the SFDP header. */
-	err = spi_nor_read_sfdp_dma_unsafe(nor, 0, sizeof(header), &header);
-	if (err < 0)
-		return err;
-
-	/* Check the SFDP header version. */
-	if (le32_to_cpu(header.signature) != SFDP_SIGNATURE ||
-	    header.major != SFDP_JESD216_MAJOR)
-		return -EINVAL;
-
-	/*
-	 * Verify that the first and only mandatory parameter header is a
-	 * Basic Flash Parameter Table header as specified in JESD216.
-	 */
-	bfpt_header = &header.bfpt_header;
-	if (SFDP_PARAM_HEADER_ID(bfpt_header) != SFDP_BFPT_ID ||
-	    bfpt_header->major != SFDP_JESD216_MAJOR)
-		return -EINVAL;
-
-	/*
-	 * Allocate memory then read all parameter headers with a single
-	 * Read SFDP command. These parameter headers will actually be parsed
-	 * twice: a first time to get the latest revision of the basic flash
-	 * parameter table, then a second time to handle the supported optional
-	 * tables.
-	 * Hence we read the parameter headers once for all to reduce the
-	 * processing time. Also we use kmalloc() instead of devm_kmalloc()
-	 * because we don't need to keep these parameter headers: the allocated
-	 * memory is always released with kfree() before exiting this function.
-	 */
-	if (header.nph) {
-		psize = header.nph * sizeof(*param_headers);
-
-		param_headers = kmalloc(psize, GFP_KERNEL);
-		if (!param_headers)
-			return -ENOMEM;
-
-		err = spi_nor_read_sfdp(nor, sizeof(header),
-					psize, param_headers);
-		if (err < 0) {
-			dev_dbg(dev, "failed to read SFDP parameter headers\n");
-			goto exit;
-		}
-	}
-
-	/*
-	 * Check other parameter headers to get the latest revision of
-	 * the basic flash parameter table.
-	 */
-	for (i = 0; i < header.nph; i++) {
-		param_header = &param_headers[i];
-
-		if (SFDP_PARAM_HEADER_ID(param_header) == SFDP_BFPT_ID &&
-		    param_header->major == SFDP_JESD216_MAJOR &&
-		    (param_header->minor > bfpt_header->minor ||
-		     (param_header->minor == bfpt_header->minor &&
-		      param_header->length > bfpt_header->length)))
-			bfpt_header = param_header;
-	}
-
-	err = spi_nor_parse_bfpt(nor, bfpt_header, params);
-	if (err)
-		goto exit;
-
-	/* Parse optional parameter tables. */
-	for (i = 0; i < header.nph; i++) {
-		param_header = &param_headers[i];
-
-		switch (SFDP_PARAM_HEADER_ID(param_header)) {
-		case SFDP_SECTOR_MAP_ID:
-			err = spi_nor_parse_smpt(nor, param_header, params);
-			break;
-
-		case SFDP_4BAIT_ID:
-			err = spi_nor_parse_4bait(nor, param_header, params);
-			break;
-
-		default:
-			break;
-		}
-
-		if (err) {
-			dev_warn(dev, "Failed to parse optional parameter table: %04x\n",
-				 SFDP_PARAM_HEADER_ID(param_header));
-			/*
-			 * Let's not drop all information we extracted so far
-			 * if optional table parsers fail. In case of failing,
-			 * each optional parser is responsible to roll back to
-			 * the previously known spi_nor data.
-			 */
-			err = 0;
-		}
-	}
-
-exit:
-	kfree(param_headers);
-	return err;
-}
-
-static int spi_nor_select_read(struct spi_nor *nor,
-			       u32 shared_hwcaps)
-{
-	int cmd, best_match = fls(shared_hwcaps & SNOR_HWCAPS_READ_MASK) - 1;
-	const struct spi_nor_read_command *read;
-
-	if (best_match < 0)
-		return -EINVAL;
-
-	cmd = spi_nor_hwcaps_read2cmd(BIT(best_match));
-	if (cmd < 0)
-		return -EINVAL;
-
-	read = &nor->params.reads[cmd];
-	nor->read_opcode = read->opcode;
-	nor->read_proto = read->proto;
-
-	/*
-	 * In the spi-nor framework, we don't need to make the difference
-	 * between mode clock cycles and wait state clock cycles.
-	 * Indeed, the value of the mode clock cycles is used by a QSPI
-	 * flash memory to know whether it should enter or leave its 0-4-4
-	 * (Continuous Read / XIP) mode.
-	 * eXecution In Place is out of the scope of the mtd sub-system.
-	 * Hence we choose to merge both mode and wait state clock cycles
-	 * into the so called dummy clock cycles.
-	 */
-	nor->read_dummy = read->num_mode_clocks + read->num_wait_states;
-	return 0;
-}
-
-static int spi_nor_select_pp(struct spi_nor *nor,
-			     u32 shared_hwcaps)
-{
-	int cmd, best_match = fls(shared_hwcaps & SNOR_HWCAPS_PP_MASK) - 1;
-	const struct spi_nor_pp_command *pp;
-
-	if (best_match < 0)
-		return -EINVAL;
-
-	cmd = spi_nor_hwcaps_pp2cmd(BIT(best_match));
-	if (cmd < 0)
-		return -EINVAL;
-
-	pp = &nor->params.page_programs[cmd];
-	nor->program_opcode = pp->opcode;
-	nor->write_proto = pp->proto;
-	return 0;
-}
-
-/**
- * spi_nor_select_uniform_erase() - select optimum uniform erase type
- * @map:		the erase map of the SPI NOR
- * @wanted_size:	the erase type size to search for. Contains the value of
- *			info->sector_size or of the "small sector" size in case
- *			CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is defined.
- *
- * Once the optimum uniform sector erase command is found, disable all the
- * other.
- *
- * Return: pointer to erase type on success, NULL otherwise.
- */
-static const struct spi_nor_erase_type *
-spi_nor_select_uniform_erase(struct spi_nor_erase_map *map,
-			     const u32 wanted_size)
-{
-	const struct spi_nor_erase_type *tested_erase, *erase = NULL;
-	int i;
-	u8 uniform_erase_type = map->uniform_erase_type;
-
-	for (i = SNOR_ERASE_TYPE_MAX - 1; i >= 0; i--) {
-		if (!(uniform_erase_type & BIT(i)))
-			continue;
-
-		tested_erase = &map->erase_type[i];
-
-		/*
-		 * If the current erase size is the one, stop here:
-		 * we have found the right uniform Sector Erase command.
-		 */
-		if (tested_erase->size == wanted_size) {
-			erase = tested_erase;
-			break;
-		}
-
-		/*
-		 * Otherwise, the current erase size is still a valid canditate.
-		 * Select the biggest valid candidate.
-		 */
-		if (!erase && tested_erase->size)
-			erase = tested_erase;
-			/* keep iterating to find the wanted_size */
-	}
-
-	if (!erase)
-		return NULL;
-
-	/* Disable all other Sector Erase commands. */
-	map->uniform_erase_type &= ~SNOR_ERASE_TYPE_MASK;
-	map->uniform_erase_type |= BIT(erase - map->erase_type);
-	return erase;
-}
-
-static int spi_nor_select_erase(struct spi_nor *nor)
-{
-	struct spi_nor_erase_map *map = &nor->params.erase_map;
-	const struct spi_nor_erase_type *erase = NULL;
-	struct mtd_info *mtd = &nor->mtd;
-	u32 wanted_size = nor->info->sector_size;
-	int i;
-
-	/*
-	 * The previous implementation handling Sector Erase commands assumed
-	 * that the SPI flash memory has an uniform layout then used only one
-	 * of the supported erase sizes for all Sector Erase commands.
-	 * So to be backward compatible, the new implementation also tries to
-	 * manage the SPI flash memory as uniform with a single erase sector
-	 * size, when possible.
-	 */
-#ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
-	/* prefer "small sector" erase if possible */
-	wanted_size = 4096u;
-#endif
-
-	if (spi_nor_has_uniform_erase(nor)) {
-		erase = spi_nor_select_uniform_erase(map, wanted_size);
-		if (!erase)
-			return -EINVAL;
-		nor->erase_opcode = erase->opcode;
-		mtd->erasesize = erase->size;
-		return 0;
-	}
-
-	/*
-	 * For non-uniform SPI flash memory, set mtd->erasesize to the
-	 * maximum erase sector size. No need to set nor->erase_opcode.
-	 */
-	for (i = SNOR_ERASE_TYPE_MAX - 1; i >= 0; i--) {
-		if (map->erase_type[i].size) {
-			erase = &map->erase_type[i];
-			break;
-		}
-	}
-
-	if (!erase)
-		return -EINVAL;
-
-	mtd->erasesize = erase->size;
-	return 0;
-}
-
-static int spi_nor_default_setup(struct spi_nor *nor,
-				 const struct spi_nor_hwcaps *hwcaps)
-{
-	struct spi_nor_flash_parameter *params = &nor->params;
-	u32 ignored_mask, shared_mask;
-	int err;
-
-	/*
-	 * Keep only the hardware capabilities supported by both the SPI
-	 * controller and the SPI flash memory.
-	 */
-	shared_mask = hwcaps->mask & params->hwcaps.mask;
-
-	if (nor->spimem) {
-		/*
-		 * When called from spi_nor_probe(), all caps are set and we
-		 * need to discard some of them based on what the SPI
-		 * controller actually supports (using spi_mem_supports_op()).
-		 */
-		spi_nor_spimem_adjust_hwcaps(nor, &shared_mask);
-	} else {
-		/*
-		 * SPI n-n-n protocols are not supported when the SPI
-		 * controller directly implements the spi_nor interface.
-		 * Yet another reason to switch to spi-mem.
-		 */
-		ignored_mask = SNOR_HWCAPS_X_X_X;
-		if (shared_mask & ignored_mask) {
-			dev_dbg(nor->dev,
-				"SPI n-n-n protocols are not supported.\n");
-			shared_mask &= ~ignored_mask;
-		}
-	}
-
-	/* Select the (Fast) Read command. */
-	err = spi_nor_select_read(nor, shared_mask);
-	if (err) {
-		dev_dbg(nor->dev,
-			"can't select read settings supported by both the SPI controller and memory.\n");
-		return err;
-	}
-
-	/* Select the Page Program command. */
-	err = spi_nor_select_pp(nor, shared_mask);
-	if (err) {
-		dev_dbg(nor->dev,
-			"can't select write settings supported by both the SPI controller and memory.\n");
-		return err;
-	}
-
-	/* Select the Sector Erase command. */
-	err = spi_nor_select_erase(nor);
-	if (err) {
-		dev_dbg(nor->dev,
-			"can't select erase settings supported by both the SPI controller and memory.\n");
-		return err;
-	}
-
-	return 0;
-}
-
-static int spi_nor_setup(struct spi_nor *nor,
-			 const struct spi_nor_hwcaps *hwcaps)
-{
-	if (!nor->params.setup)
-		return 0;
-
-	return nor->params.setup(nor, hwcaps);
-}
-
-static void atmel_set_default_init(struct spi_nor *nor)
-{
-	nor->flags |= SNOR_F_HAS_LOCK;
-}
-
-static void intel_set_default_init(struct spi_nor *nor)
-{
-	nor->flags |= SNOR_F_HAS_LOCK;
-}
-
-static void issi_set_default_init(struct spi_nor *nor)
-{
-	nor->params.quad_enable = spi_nor_sr1_bit6_quad_enable;
-}
-
-static void macronix_set_default_init(struct spi_nor *nor)
-{
-	nor->params.quad_enable = spi_nor_sr1_bit6_quad_enable;
-	nor->params.set_4byte = macronix_set_4byte;
-}
-
-static void sst_set_default_init(struct spi_nor *nor)
-{
-	nor->flags |= SNOR_F_HAS_LOCK;
-}
-
-static void st_micron_set_default_init(struct spi_nor *nor)
-{
-	nor->flags |= SNOR_F_HAS_LOCK;
-	nor->flags &= ~SNOR_F_HAS_16BIT_SR;
-	nor->params.quad_enable = NULL;
-	nor->params.set_4byte = st_micron_set_4byte;
-}
-
-static void winbond_set_default_init(struct spi_nor *nor)
-{
-	nor->params.set_4byte = winbond_set_4byte;
-}
-
-/**
- * spi_nor_manufacturer_init_params() - Initialize the flash's parameters and
- * settings based on MFR register and ->default_init() hook.
- * @nor:	pointer to a 'struct spi-nor'.
- */
-static void spi_nor_manufacturer_init_params(struct spi_nor *nor)
-{
-	/* Init flash parameters based on MFR */
-	switch (JEDEC_MFR(nor->info)) {
-	case SNOR_MFR_ATMEL:
-		atmel_set_default_init(nor);
-		break;
-
-	case SNOR_MFR_INTEL:
-		intel_set_default_init(nor);
-		break;
-
-	case SNOR_MFR_ISSI:
-		issi_set_default_init(nor);
-		break;
-
-	case SNOR_MFR_MACRONIX:
-		macronix_set_default_init(nor);
-		break;
-
-	case SNOR_MFR_ST:
-	case SNOR_MFR_MICRON:
-		st_micron_set_default_init(nor);
-		break;
-
-	case SNOR_MFR_SST:
-		sst_set_default_init(nor);
-		break;
-
-	case SNOR_MFR_WINBOND:
-		winbond_set_default_init(nor);
-		break;
-
-	default:
-		break;
-	}
-
-	if (nor->info->fixups && nor->info->fixups->default_init)
-		nor->info->fixups->default_init(nor);
-}
-
-/**
- * spi_nor_sfdp_init_params() - Initialize the flash's parameters and settings
- * based on JESD216 SFDP standard.
- * @nor:	pointer to a 'struct spi-nor'.
- *
- * The method has a roll-back mechanism: in case the SFDP parsing fails, the
- * legacy flash parameters and settings will be restored.
- */
-static void spi_nor_sfdp_init_params(struct spi_nor *nor)
-{
-	struct spi_nor_flash_parameter sfdp_params;
-
-	memcpy(&sfdp_params, &nor->params, sizeof(sfdp_params));
-
-	if (spi_nor_parse_sfdp(nor, &sfdp_params)) {
-		nor->addr_width = 0;
-		nor->flags &= ~SNOR_F_4B_OPCODES;
-	} else {
-		memcpy(&nor->params, &sfdp_params, sizeof(nor->params));
-	}
-}
-
-/**
- * spi_nor_info_init_params() - Initialize the flash's parameters and settings
- * based on nor->info data.
- * @nor:	pointer to a 'struct spi-nor'.
- */
-static void spi_nor_info_init_params(struct spi_nor *nor)
-{
-	struct spi_nor_flash_parameter *params = &nor->params;
-	struct spi_nor_erase_map *map = &params->erase_map;
-	const struct flash_info *info = nor->info;
-	struct device_node *np = spi_nor_get_flash_node(nor);
-	u8 i, erase_mask;
-
-	/* Initialize legacy flash parameters and settings. */
-	params->quad_enable = spi_nor_sr2_bit1_quad_enable;
-	params->set_4byte = spansion_set_4byte;
-	params->setup = spi_nor_default_setup;
-	/* Default to 16-bit Write Status (01h) Command */
-	nor->flags |= SNOR_F_HAS_16BIT_SR;
-
-	/* Set SPI NOR sizes. */
-	params->size = (u64)info->sector_size * info->n_sectors;
-	params->page_size = info->page_size;
-
-	if (!(info->flags & SPI_NOR_NO_FR)) {
-		/* Default to Fast Read for DT and non-DT platform devices. */
-		params->hwcaps.mask |= SNOR_HWCAPS_READ_FAST;
-
-		/* Mask out Fast Read if not requested at DT instantiation. */
-		if (np && !of_property_read_bool(np, "m25p,fast-read"))
-			params->hwcaps.mask &= ~SNOR_HWCAPS_READ_FAST;
-	}
-
-	/* (Fast) Read settings. */
-	params->hwcaps.mask |= SNOR_HWCAPS_READ;
-	spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ],
-				  0, 0, SPINOR_OP_READ,
-				  SNOR_PROTO_1_1_1);
-
-	if (params->hwcaps.mask & SNOR_HWCAPS_READ_FAST)
-		spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ_FAST],
-					  0, 8, SPINOR_OP_READ_FAST,
-					  SNOR_PROTO_1_1_1);
-
-	if (info->flags & SPI_NOR_DUAL_READ) {
-		params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2;
-		spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ_1_1_2],
-					  0, 8, SPINOR_OP_READ_1_1_2,
-					  SNOR_PROTO_1_1_2);
-	}
-
-	if (info->flags & SPI_NOR_QUAD_READ) {
-		params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4;
-		spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ_1_1_4],
-					  0, 8, SPINOR_OP_READ_1_1_4,
-					  SNOR_PROTO_1_1_4);
-	}
-
-	if (info->flags & SPI_NOR_OCTAL_READ) {
-		params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_8;
-		spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ_1_1_8],
-					  0, 8, SPINOR_OP_READ_1_1_8,
-					  SNOR_PROTO_1_1_8);
-	}
-
-	/* Page Program settings. */
-	params->hwcaps.mask |= SNOR_HWCAPS_PP;
-	spi_nor_set_pp_settings(&params->page_programs[SNOR_CMD_PP],
-				SPINOR_OP_PP, SNOR_PROTO_1_1_1);
-
-	/*
-	 * Sector Erase settings. Sort Erase Types in ascending order, with the
-	 * smallest erase size starting at BIT(0).
-	 */
-	erase_mask = 0;
-	i = 0;
-	if (info->flags & SECT_4K_PMC) {
-		erase_mask |= BIT(i);
-		spi_nor_set_erase_type(&map->erase_type[i], 4096u,
-				       SPINOR_OP_BE_4K_PMC);
-		i++;
-	} else if (info->flags & SECT_4K) {
-		erase_mask |= BIT(i);
-		spi_nor_set_erase_type(&map->erase_type[i], 4096u,
-				       SPINOR_OP_BE_4K);
-		i++;
-	}
-	erase_mask |= BIT(i);
-	spi_nor_set_erase_type(&map->erase_type[i], info->sector_size,
-			       SPINOR_OP_SE);
-	spi_nor_init_uniform_erase_map(map, erase_mask, params->size);
-}
-
-static void spansion_post_sfdp_fixups(struct spi_nor *nor)
-{
-	if (nor->params.size <= SZ_16M)
-		return;
-
-	nor->flags |= SNOR_F_4B_OPCODES;
-	/* No small sector erase for 4-byte command set */
-	nor->erase_opcode = SPINOR_OP_SE;
-	nor->mtd.erasesize = nor->info->sector_size;
-}
-
-static void s3an_post_sfdp_fixups(struct spi_nor *nor)
-{
-	nor->params.setup = s3an_nor_setup;
-}
-
-/**
- * spi_nor_post_sfdp_fixups() - Updates the flash's parameters and settings
- * after SFDP has been parsed (is also called for SPI NORs that do not
- * support RDSFDP).
- * @nor:	pointer to a 'struct spi_nor'
- *
- * Typically used to tweak various parameters that could not be extracted by
- * other means (i.e. when information provided by the SFDP/flash_info tables
- * are incomplete or wrong).
- */
-static void spi_nor_post_sfdp_fixups(struct spi_nor *nor)
-{
-	switch (JEDEC_MFR(nor->info)) {
-	case SNOR_MFR_SPANSION:
-		spansion_post_sfdp_fixups(nor);
-		break;
-
-	default:
-		break;
-	}
-
-	if (nor->info->flags & SPI_S3AN)
-		s3an_post_sfdp_fixups(nor);
-
-	if (nor->info->fixups && nor->info->fixups->post_sfdp)
-		nor->info->fixups->post_sfdp(nor);
-}
-
-/**
- * spi_nor_late_init_params() - Late initialization of default flash parameters.
- * @nor:	pointer to a 'struct spi_nor'
- *
- * Used to set default flash parameters and settings when the ->default_init()
- * hook or the SFDP parser let voids.
- */
-static void spi_nor_late_init_params(struct spi_nor *nor)
-{
-	/*
-	 * NOR protection support. When locking_ops are not provided, we pick
-	 * the default ones.
-	 */
-	if (nor->flags & SNOR_F_HAS_LOCK && !nor->params.locking_ops)
-		nor->params.locking_ops = &stm_locking_ops;
-}
-
-/**
- * spi_nor_init_params() - Initialize the flash's parameters and settings.
- * @nor:	pointer to a 'struct spi-nor'.
- *
- * The flash parameters and settings are initialized based on a sequence of
- * calls that are ordered by priority:
- *
- * 1/ Default flash parameters initialization. The initializations are done
- *    based on nor->info data:
- *		spi_nor_info_init_params()
- *
- * which can be overwritten by:
- * 2/ Manufacturer flash parameters initialization. The initializations are
- *    done based on MFR register, or when the decisions can not be done solely
- *    based on MFR, by using specific flash_info tweeks, ->default_init():
- *		spi_nor_manufacturer_init_params()
- *
- * which can be overwritten by:
- * 3/ SFDP flash parameters initialization. JESD216 SFDP is a standard and
- *    should be more accurate that the above.
- *		spi_nor_sfdp_init_params()
- *
- *    Please note that there is a ->post_bfpt() fixup hook that can overwrite
- *    the flash parameters and settings immediately after parsing the Basic
- *    Flash Parameter Table.
- *
- * which can be overwritten by:
- * 4/ Post SFDP flash parameters initialization. Used to tweak various
- *    parameters that could not be extracted by other means (i.e. when
- *    information provided by the SFDP/flash_info tables are incomplete or
- *    wrong).
- *		spi_nor_post_sfdp_fixups()
- *
- * 5/ Late default flash parameters initialization, used when the
- * ->default_init() hook or the SFDP parser do not set specific params.
- *		spi_nor_late_init_params()
- */
-static void spi_nor_init_params(struct spi_nor *nor)
-{
-	spi_nor_info_init_params(nor);
-
-	spi_nor_manufacturer_init_params(nor);
-
-	if ((nor->info->flags & (SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)) &&
-	    !(nor->info->flags & SPI_NOR_SKIP_SFDP))
-		spi_nor_sfdp_init_params(nor);
-
-	spi_nor_post_sfdp_fixups(nor);
-
-	spi_nor_late_init_params(nor);
-}
-
-/**
- * spi_nor_quad_enable() - enable Quad I/O if needed.
- * @nor:                pointer to a 'struct spi_nor'
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_quad_enable(struct spi_nor *nor)
-{
-	if (!nor->params.quad_enable)
-		return 0;
-
-	if (!(spi_nor_get_protocol_width(nor->read_proto) == 4 ||
-	      spi_nor_get_protocol_width(nor->write_proto) == 4))
-		return 0;
-
-	return nor->params.quad_enable(nor);
-}
-
-/**
- * spi_nor_unlock_all() - Unlocks the entire flash memory array.
- * @nor:	pointer to a 'struct spi_nor'.
- *
- * Some SPI NOR flashes are write protected by default after a power-on reset
- * cycle, in order to avoid inadvertent writes during power-up. Backward
- * compatibility imposes to unlock the entire flash memory array at power-up
- * by default.
- */
-static int spi_nor_unlock_all(struct spi_nor *nor)
-{
-	if (nor->flags & SNOR_F_HAS_LOCK)
-		return spi_nor_unlock(&nor->mtd, 0, nor->params.size);
-
-	return 0;
-}
-
-static int spi_nor_init(struct spi_nor *nor)
-{
-	int err;
-
-	err = spi_nor_quad_enable(nor);
-	if (err) {
-		dev_dbg(nor->dev, "quad mode not supported\n");
-		return err;
-	}
-
-	err = spi_nor_unlock_all(nor);
-	if (err) {
-		dev_dbg(nor->dev, "Failed to unlock the entire flash memory array\n");
-		return err;
-	}
-
-	if (nor->addr_width == 4 && !(nor->flags & SNOR_F_4B_OPCODES)) {
-		/*
-		 * If the RESET# pin isn't hooked up properly, or the system
-		 * otherwise doesn't perform a reset command in the boot
-		 * sequence, it's impossible to 100% protect against unexpected
-		 * reboots (e.g., crashes). Warn the user (or hopefully, system
-		 * designer) that this is bad.
-		 */
-		WARN_ONCE(nor->flags & SNOR_F_BROKEN_RESET,
-			  "enabling reset hack; may not recover from unexpected reboots\n");
-		nor->params.set_4byte(nor, true);
-	}
-
-	return 0;
-}
-
-/* mtd resume handler */
-static void spi_nor_resume(struct mtd_info *mtd)
-{
-	struct spi_nor *nor = mtd_to_spi_nor(mtd);
-	struct device *dev = nor->dev;
-	int ret;
-
-	/* re-initialize the nor chip */
-	ret = spi_nor_init(nor);
-	if (ret)
-		dev_err(dev, "resume() failed\n");
-}
-
-void spi_nor_restore(struct spi_nor *nor)
-{
-	/* restore the addressing mode */
-	if (nor->addr_width == 4 && !(nor->flags & SNOR_F_4B_OPCODES) &&
-	    nor->flags & SNOR_F_BROKEN_RESET)
-		nor->params.set_4byte(nor, false);
-}
-EXPORT_SYMBOL_GPL(spi_nor_restore);
-
-static const struct flash_info *spi_nor_match_id(const char *name)
-{
-	const struct flash_info *id = spi_nor_ids;
-
-	while (id->name) {
-		if (!strcmp(name, id->name))
-			return id;
-		id++;
-	}
-	return NULL;
-}
-
-static int spi_nor_set_addr_width(struct spi_nor *nor)
-{
-	if (nor->addr_width) {
-		/* already configured from SFDP */
-	} else if (nor->info->addr_width) {
-		nor->addr_width = nor->info->addr_width;
-	} else if (nor->mtd.size > 0x1000000) {
-		/* enable 4-byte addressing if the device exceeds 16MiB */
-		nor->addr_width = 4;
-	} else {
-		nor->addr_width = 3;
-	}
-
-	if (nor->addr_width > SPI_NOR_MAX_ADDR_WIDTH) {
-		dev_dbg(nor->dev, "address width is too large: %u\n",
-			nor->addr_width);
-		return -EINVAL;
-	}
-
-	/* Set 4byte opcodes when possible. */
-	if (nor->addr_width == 4 && nor->flags & SNOR_F_4B_OPCODES &&
-	    !(nor->flags & SNOR_F_HAS_4BAIT))
-		spi_nor_set_4byte_opcodes(nor);
-
-	return 0;
-}
-
-static void spi_nor_debugfs_init(struct spi_nor *nor,
-				 const struct flash_info *info)
-{
-	struct mtd_info *mtd = &nor->mtd;
-
-	mtd->dbg.partname = info->name;
-	mtd->dbg.partid = devm_kasprintf(nor->dev, GFP_KERNEL, "spi-nor:%*phN",
-					 info->id_len, info->id);
-}
-
-static const struct flash_info *spi_nor_get_flash_info(struct spi_nor *nor,
-						       const char *name)
-{
-	const struct flash_info *info = NULL;
-
-	if (name)
-		info = spi_nor_match_id(name);
-	/* Try to auto-detect if chip name wasn't specified or not found */
-	if (!info)
-		info = spi_nor_read_id(nor);
-	if (IS_ERR_OR_NULL(info))
-		return ERR_PTR(-ENOENT);
-
-	/*
-	 * If caller has specified name of flash model that can normally be
-	 * detected using JEDEC, let's verify it.
-	 */
-	if (name && info->id_len) {
-		const struct flash_info *jinfo;
-
-		jinfo = spi_nor_read_id(nor);
-		if (IS_ERR(jinfo)) {
-			return jinfo;
-		} else if (jinfo != info) {
-			/*
-			 * JEDEC knows better, so overwrite platform ID. We
-			 * can't trust partitions any longer, but we'll let
-			 * mtd apply them anyway, since some partitions may be
-			 * marked read-only, and we don't want to lose that
-			 * information, even if it's not 100% accurate.
-			 */
-			dev_warn(nor->dev, "found %s, expected %s\n",
-				 jinfo->name, info->name);
-			info = jinfo;
-		}
-	}
-
-	return info;
-}
-
-int spi_nor_scan(struct spi_nor *nor, const char *name,
-		 const struct spi_nor_hwcaps *hwcaps)
-{
-	const struct flash_info *info;
-	struct device *dev = nor->dev;
-	struct mtd_info *mtd = &nor->mtd;
-	struct device_node *np = spi_nor_get_flash_node(nor);
-	struct spi_nor_flash_parameter *params = &nor->params;
-	int ret;
-	int i;
-
-	ret = spi_nor_check(nor);
-	if (ret)
-		return ret;
-
-	/* Reset SPI protocol for all commands. */
-	nor->reg_proto = SNOR_PROTO_1_1_1;
-	nor->read_proto = SNOR_PROTO_1_1_1;
-	nor->write_proto = SNOR_PROTO_1_1_1;
-
-	/*
-	 * We need the bounce buffer early to read/write registers when going
-	 * through the spi-mem layer (buffers have to be DMA-able).
-	 * For spi-mem drivers, we'll reallocate a new buffer if
-	 * nor->page_size turns out to be greater than PAGE_SIZE (which
-	 * shouldn't happen before long since NOR pages are usually less
-	 * than 1KB) after spi_nor_scan() returns.
-	 */
-	nor->bouncebuf_size = PAGE_SIZE;
-	nor->bouncebuf = devm_kmalloc(dev, nor->bouncebuf_size,
-				      GFP_KERNEL);
-	if (!nor->bouncebuf)
-		return -ENOMEM;
-
-	info = spi_nor_get_flash_info(nor, name);
-	if (IS_ERR(info))
-		return PTR_ERR(info);
-
-	nor->info = info;
-
-	spi_nor_debugfs_init(nor, info);
-
-	mutex_init(&nor->lock);
-
-	/*
-	 * Make sure the XSR_RDY flag is set before calling
-	 * spi_nor_wait_till_ready(). Xilinx S3AN share MFR
-	 * with Atmel spi-nor
-	 */
-	if (info->flags & SPI_NOR_XSR_RDY)
-		nor->flags |=  SNOR_F_READY_XSR_RDY;
-
-	if (info->flags & SPI_NOR_HAS_LOCK)
-		nor->flags |= SNOR_F_HAS_LOCK;
-
-	/* Init flash parameters based on flash_info struct and SFDP */
-	spi_nor_init_params(nor);
-
-	if (!mtd->name)
-		mtd->name = dev_name(dev);
-	mtd->priv = nor;
-	mtd->type = MTD_NORFLASH;
-	mtd->writesize = 1;
-	mtd->flags = MTD_CAP_NORFLASH;
-	mtd->size = params->size;
-	mtd->_erase = spi_nor_erase;
-	mtd->_read = spi_nor_read;
-	mtd->_resume = spi_nor_resume;
-
-	if (nor->params.locking_ops) {
-		mtd->_lock = spi_nor_lock;
-		mtd->_unlock = spi_nor_unlock;
-		mtd->_is_locked = spi_nor_is_locked;
-	}
-
-	/* sst nor chips use AAI word program */
-	if (info->flags & SST_WRITE)
-		mtd->_write = sst_write;
-	else
-		mtd->_write = spi_nor_write;
-
-	if (info->flags & USE_FSR)
-		nor->flags |= SNOR_F_USE_FSR;
-	if (info->flags & SPI_NOR_HAS_TB) {
-		nor->flags |= SNOR_F_HAS_SR_TB;
-		if (info->flags & SPI_NOR_TB_SR_BIT6)
-			nor->flags |= SNOR_F_HAS_SR_TB_BIT6;
-	}
-
-	if (info->flags & NO_CHIP_ERASE)
-		nor->flags |= SNOR_F_NO_OP_CHIP_ERASE;
-	if (info->flags & USE_CLSR)
-		nor->flags |= SNOR_F_USE_CLSR;
-
-	if (info->flags & SPI_NOR_NO_ERASE)
-		mtd->flags |= MTD_NO_ERASE;
-
-	mtd->dev.parent = dev;
-	nor->page_size = params->page_size;
-	mtd->writebufsize = nor->page_size;
-
-	if (of_property_read_bool(np, "broken-flash-reset"))
-		nor->flags |= SNOR_F_BROKEN_RESET;
-
-	/*
-	 * Configure the SPI memory:
-	 * - select op codes for (Fast) Read, Page Program and Sector Erase.
-	 * - set the number of dummy cycles (mode cycles + wait states).
-	 * - set the SPI protocols for register and memory accesses.
-	 */
-	ret = spi_nor_setup(nor, hwcaps);
-	if (ret)
-		return ret;
-
-	if (info->flags & SPI_NOR_4B_OPCODES)
-		nor->flags |= SNOR_F_4B_OPCODES;
-
-	ret = spi_nor_set_addr_width(nor);
-	if (ret)
-		return ret;
-
-	/* Send all the required SPI flash commands to initialize device */
-	ret = spi_nor_init(nor);
-	if (ret)
-		return ret;
-
-	dev_info(dev, "%s (%lld Kbytes)\n", info->name,
-			(long long)mtd->size >> 10);
-
-	dev_dbg(dev,
-		"mtd .name = %s, .size = 0x%llx (%lldMiB), "
-		".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n",
-		mtd->name, (long long)mtd->size, (long long)(mtd->size >> 20),
-		mtd->erasesize, mtd->erasesize / 1024, mtd->numeraseregions);
-
-	if (mtd->numeraseregions)
-		for (i = 0; i < mtd->numeraseregions; i++)
-			dev_dbg(dev,
-				"mtd.eraseregions[%d] = { .offset = 0x%llx, "
-				".erasesize = 0x%.8x (%uKiB), "
-				".numblocks = %d }\n",
-				i, (long long)mtd->eraseregions[i].offset,
-				mtd->eraseregions[i].erasesize,
-				mtd->eraseregions[i].erasesize / 1024,
-				mtd->eraseregions[i].numblocks);
-	return 0;
-}
-EXPORT_SYMBOL_GPL(spi_nor_scan);
-
-static int spi_nor_probe(struct spi_mem *spimem)
-{
-	struct spi_device *spi = spimem->spi;
-	struct flash_platform_data *data = dev_get_platdata(&spi->dev);
-	struct spi_nor *nor;
-	/*
-	 * Enable all caps by default. The core will mask them after
-	 * checking what's really supported using spi_mem_supports_op().
-	 */
-	const struct spi_nor_hwcaps hwcaps = { .mask = SNOR_HWCAPS_ALL };
-	char *flash_name;
-	int ret;
-
-	nor = devm_kzalloc(&spi->dev, sizeof(*nor), GFP_KERNEL);
-	if (!nor)
-		return -ENOMEM;
-
-	nor->spimem = spimem;
-	nor->dev = &spi->dev;
-	spi_nor_set_flash_node(nor, spi->dev.of_node);
-
-	spi_mem_set_drvdata(spimem, nor);
-
-	if (data && data->name)
-		nor->mtd.name = data->name;
-
-	if (!nor->mtd.name)
-		nor->mtd.name = spi_mem_get_name(spimem);
-
-	/*
-	 * For some (historical?) reason many platforms provide two different
-	 * names in flash_platform_data: "name" and "type". Quite often name is
-	 * set to "m25p80" and then "type" provides a real chip name.
-	 * If that's the case, respect "type" and ignore a "name".
-	 */
-	if (data && data->type)
-		flash_name = data->type;
-	else if (!strcmp(spi->modalias, "spi-nor"))
-		flash_name = NULL; /* auto-detect */
-	else
-		flash_name = spi->modalias;
-
-	ret = spi_nor_scan(nor, flash_name, &hwcaps);
-	if (ret)
-		return ret;
-
-	/*
-	 * None of the existing parts have > 512B pages, but let's play safe
-	 * and add this logic so that if anyone ever adds support for such
-	 * a NOR we don't end up with buffer overflows.
-	 */
-	if (nor->page_size > PAGE_SIZE) {
-		nor->bouncebuf_size = nor->page_size;
-		devm_kfree(nor->dev, nor->bouncebuf);
-		nor->bouncebuf = devm_kmalloc(nor->dev,
-					      nor->bouncebuf_size,
-					      GFP_KERNEL);
-		if (!nor->bouncebuf)
-			return -ENOMEM;
-	}
-
-	return mtd_device_register(&nor->mtd, data ? data->parts : NULL,
-				   data ? data->nr_parts : 0);
-}
-
-static int spi_nor_remove(struct spi_mem *spimem)
-{
-	struct spi_nor *nor = spi_mem_get_drvdata(spimem);
-
-	spi_nor_restore(nor);
-
-	/* Clean up MTD stuff. */
-	return mtd_device_unregister(&nor->mtd);
-}
-
-static void spi_nor_shutdown(struct spi_mem *spimem)
-{
-	struct spi_nor *nor = spi_mem_get_drvdata(spimem);
-
-	spi_nor_restore(nor);
-}
-
-/*
- * Do NOT add to this array without reading the following:
- *
- * Historically, many flash devices are bound to this driver by their name. But
- * since most of these flash are compatible to some extent, and their
- * differences can often be differentiated by the JEDEC read-ID command, we
- * encourage new users to add support to the spi-nor library, and simply bind
- * against a generic string here (e.g., "jedec,spi-nor").
- *
- * Many flash names are kept here in this list (as well as in spi-nor.c) to
- * keep them available as module aliases for existing platforms.
- */
-static const struct spi_device_id spi_nor_dev_ids[] = {
-	/*
-	 * Allow non-DT platform devices to bind to the "spi-nor" modalias, and
-	 * hack around the fact that the SPI core does not provide uevent
-	 * matching for .of_match_table
-	 */
-	{"spi-nor"},
-
-	/*
-	 * Entries not used in DTs that should be safe to drop after replacing
-	 * them with "spi-nor" in platform data.
-	 */
-	{"s25sl064a"},	{"w25x16"},	{"m25p10"},	{"m25px64"},
-
-	/*
-	 * Entries that were used in DTs without "jedec,spi-nor" fallback and
-	 * should be kept for backward compatibility.
-	 */
-	{"at25df321a"},	{"at25df641"},	{"at26df081a"},
-	{"mx25l4005a"},	{"mx25l1606e"},	{"mx25l6405d"},	{"mx25l12805d"},
-	{"mx25l25635e"},{"mx66l51235l"},
-	{"n25q064"},	{"n25q128a11"},	{"n25q128a13"},	{"n25q512a"},
-	{"s25fl256s1"},	{"s25fl512s"},	{"s25sl12801"},	{"s25fl008k"},
-	{"s25fl064k"},
-	{"sst25vf040b"},{"sst25vf016b"},{"sst25vf032b"},{"sst25wf040"},
-	{"m25p40"},	{"m25p80"},	{"m25p16"},	{"m25p32"},
-	{"m25p64"},	{"m25p128"},
-	{"w25x80"},	{"w25x32"},	{"w25q32"},	{"w25q32dw"},
-	{"w25q80bl"},	{"w25q128"},	{"w25q256"},
-
-	/* Flashes that can't be detected using JEDEC */
-	{"m25p05-nonjedec"},	{"m25p10-nonjedec"},	{"m25p20-nonjedec"},
-	{"m25p40-nonjedec"},	{"m25p80-nonjedec"},	{"m25p16-nonjedec"},
-	{"m25p32-nonjedec"},	{"m25p64-nonjedec"},	{"m25p128-nonjedec"},
-
-	/* Everspin MRAMs (non-JEDEC) */
-	{ "mr25h128" }, /* 128 Kib, 40 MHz */
-	{ "mr25h256" }, /* 256 Kib, 40 MHz */
-	{ "mr25h10" },  /*   1 Mib, 40 MHz */
-	{ "mr25h40" },  /*   4 Mib, 40 MHz */
-
-	{ },
-};
-MODULE_DEVICE_TABLE(spi, spi_nor_dev_ids);
-
-static const struct of_device_id spi_nor_of_table[] = {
-	/*
-	 * Generic compatibility for SPI NOR that can be identified by the
-	 * JEDEC READ ID opcode (0x9F). Use this, if possible.
-	 */
-	{ .compatible = "jedec,spi-nor" },
-	{ /* sentinel */ },
-};
-MODULE_DEVICE_TABLE(of, spi_nor_of_table);
-
-/*
- * REVISIT: many of these chips have deep power-down modes, which
- * should clearly be entered on suspend() to minimize power use.
- * And also when they're otherwise idle...
- */
-static struct spi_mem_driver spi_nor_driver = {
-	.spidrv = {
-		.driver = {
-			.name = "spi-nor",
-			.of_match_table = spi_nor_of_table,
-		},
-		.id_table = spi_nor_dev_ids,
-	},
-	.probe = spi_nor_probe,
-	.remove = spi_nor_remove,
-	.shutdown = spi_nor_shutdown,
-};
-module_spi_mem_driver(spi_nor_driver);
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Huang Shijie <shijie8@gmail.com>");
-MODULE_AUTHOR("Mike Lavender");
-MODULE_DESCRIPTION("framework for SPI NOR");
diff --git a/drivers/mtd/spi-nor/sst.c b/drivers/mtd/spi-nor/sst.c
new file mode 100644
index 0000000..e0af6d2
--- /dev/null
+++ b/drivers/mtd/spi-nor/sst.c
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static const struct flash_info sst_parts[] = {
+	/* SST -- large erase sizes are "overlays", "sectors" are 4K */
+	{ "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024,  8,
+			      SECT_4K | SST_WRITE) },
+	{ "sst25vf080b", INFO(0xbf258e, 0, 64 * 1024, 16,
+			      SECT_4K | SST_WRITE) },
+	{ "sst25vf016b", INFO(0xbf2541, 0, 64 * 1024, 32,
+			      SECT_4K | SST_WRITE) },
+	{ "sst25vf032b", INFO(0xbf254a, 0, 64 * 1024, 64,
+			      SECT_4K | SST_WRITE) },
+	{ "sst25vf064c", INFO(0xbf254b, 0, 64 * 1024, 128, SECT_4K) },
+	{ "sst25wf512",  INFO(0xbf2501, 0, 64 * 1024,  1,
+			      SECT_4K | SST_WRITE) },
+	{ "sst25wf010",  INFO(0xbf2502, 0, 64 * 1024,  2,
+			      SECT_4K | SST_WRITE) },
+	{ "sst25wf020",  INFO(0xbf2503, 0, 64 * 1024,  4,
+			      SECT_4K | SST_WRITE) },
+	{ "sst25wf020a", INFO(0x621612, 0, 64 * 1024,  4, SECT_4K) },
+	{ "sst25wf040b", INFO(0x621613, 0, 64 * 1024,  8, SECT_4K) },
+	{ "sst25wf040",  INFO(0xbf2504, 0, 64 * 1024,  8,
+			      SECT_4K | SST_WRITE) },
+	{ "sst25wf080",  INFO(0xbf2505, 0, 64 * 1024, 16,
+			      SECT_4K | SST_WRITE) },
+	{ "sst26wf016b", INFO(0xbf2651, 0, 64 * 1024, 32,
+			      SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "sst26vf016b", INFO(0xbf2641, 0, 64 * 1024, 32,
+			      SECT_4K | SPI_NOR_DUAL_READ) },
+	{ "sst26vf064b", INFO(0xbf2643, 0, 64 * 1024, 128,
+			      SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+};
+
+static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
+		     size_t *retlen, const u_char *buf)
+{
+	struct spi_nor *nor = mtd_to_spi_nor(mtd);
+	size_t actual = 0;
+	int ret;
+
+	dev_dbg(nor->dev, "to 0x%08x, len %zd\n", (u32)to, len);
+
+	ret = spi_nor_lock_and_prep(nor);
+	if (ret)
+		return ret;
+
+	ret = spi_nor_write_enable(nor);
+	if (ret)
+		goto out;
+
+	nor->sst_write_second = false;
+
+	/* Start write from odd address. */
+	if (to % 2) {
+		nor->program_opcode = SPINOR_OP_BP;
+
+		/* write one byte. */
+		ret = spi_nor_write_data(nor, to, 1, buf);
+		if (ret < 0)
+			goto out;
+		WARN(ret != 1, "While writing 1 byte written %i bytes\n", ret);
+		ret = spi_nor_wait_till_ready(nor);
+		if (ret)
+			goto out;
+
+		to++;
+		actual++;
+	}
+
+	/* Write out most of the data here. */
+	for (; actual < len - 1; actual += 2) {
+		nor->program_opcode = SPINOR_OP_AAI_WP;
+
+		/* write two bytes. */
+		ret = spi_nor_write_data(nor, to, 2, buf + actual);
+		if (ret < 0)
+			goto out;
+		WARN(ret != 2, "While writing 2 bytes written %i bytes\n", ret);
+		ret = spi_nor_wait_till_ready(nor);
+		if (ret)
+			goto out;
+		to += 2;
+		nor->sst_write_second = true;
+	}
+	nor->sst_write_second = false;
+
+	ret = spi_nor_write_disable(nor);
+	if (ret)
+		goto out;
+
+	ret = spi_nor_wait_till_ready(nor);
+	if (ret)
+		goto out;
+
+	/* Write out trailing byte if it exists. */
+	if (actual != len) {
+		ret = spi_nor_write_enable(nor);
+		if (ret)
+			goto out;
+
+		nor->program_opcode = SPINOR_OP_BP;
+		ret = spi_nor_write_data(nor, to, 1, buf + actual);
+		if (ret < 0)
+			goto out;
+		WARN(ret != 1, "While writing 1 byte written %i bytes\n", ret);
+		ret = spi_nor_wait_till_ready(nor);
+		if (ret)
+			goto out;
+
+		actual += 1;
+
+		ret = spi_nor_write_disable(nor);
+	}
+out:
+	*retlen += actual;
+	spi_nor_unlock_and_unprep(nor);
+	return ret;
+}
+
+static void sst_default_init(struct spi_nor *nor)
+{
+	nor->flags |= SNOR_F_HAS_LOCK;
+}
+
+static void sst_post_sfdp_fixups(struct spi_nor *nor)
+{
+	if (nor->info->flags & SST_WRITE)
+		nor->mtd._write = sst_write;
+}
+
+static const struct spi_nor_fixups sst_fixups = {
+	.default_init = sst_default_init,
+	.post_sfdp = sst_post_sfdp_fixups,
+};
+
+const struct spi_nor_manufacturer spi_nor_sst = {
+	.name = "sst",
+	.parts = sst_parts,
+	.nparts = ARRAY_SIZE(sst_parts),
+	.fixups = &sst_fixups,
+};
diff --git a/drivers/mtd/spi-nor/winbond.c b/drivers/mtd/spi-nor/winbond.c
new file mode 100644
index 0000000..17deaba
--- /dev/null
+++ b/drivers/mtd/spi-nor/winbond.c
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static const struct flash_info winbond_parts[] = {
+	/* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */
+	{ "w25x05", INFO(0xef3010, 0, 64 * 1024,  1,  SECT_4K) },
+	{ "w25x10", INFO(0xef3011, 0, 64 * 1024,  2,  SECT_4K) },
+	{ "w25x20", INFO(0xef3012, 0, 64 * 1024,  4,  SECT_4K) },
+	{ "w25x40", INFO(0xef3013, 0, 64 * 1024,  8,  SECT_4K) },
+	{ "w25x80", INFO(0xef3014, 0, 64 * 1024,  16, SECT_4K) },
+	{ "w25x16", INFO(0xef3015, 0, 64 * 1024,  32, SECT_4K) },
+	{ "w25q16dw", INFO(0xef6015, 0, 64 * 1024,  32,
+			   SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+			   SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
+	{ "w25x32", INFO(0xef3016, 0, 64 * 1024,  64, SECT_4K) },
+	{ "w25q16jv-im/jm", INFO(0xef7015, 0, 64 * 1024,  32,
+				 SECT_4K | SPI_NOR_DUAL_READ |
+				 SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK |
+				 SPI_NOR_HAS_TB) },
+	{ "w25q20cl", INFO(0xef4012, 0, 64 * 1024,  4, SECT_4K) },
+	{ "w25q20bw", INFO(0xef5012, 0, 64 * 1024,  4, SECT_4K) },
+	{ "w25q20ew", INFO(0xef6012, 0, 64 * 1024,  4, SECT_4K) },
+	{ "w25q32", INFO(0xef4016, 0, 64 * 1024,  64, SECT_4K) },
+	{ "w25q32dw", INFO(0xef6016, 0, 64 * 1024,  64,
+			   SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+			   SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
+	{ "w25q32jv", INFO(0xef7016, 0, 64 * 1024,  64,
+			   SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+			   SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+	},
+	{ "w25q32jwm", INFO(0xef8016, 0, 64 * 1024,  64,
+			    SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+			    SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
+	{ "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) },
+	{ "w25q64", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) },
+	{ "w25q64dw", INFO(0xef6017, 0, 64 * 1024, 128,
+			   SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+			   SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
+	{ "w25q128fw", INFO(0xef6018, 0, 64 * 1024, 256,
+			    SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+			    SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
+	{ "w25q128jv", INFO(0xef7018, 0, 64 * 1024, 256,
+			    SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+			    SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
+	{ "w25q80", INFO(0xef5014, 0, 64 * 1024,  16, SECT_4K) },
+	{ "w25q80bl", INFO(0xef4014, 0, 64 * 1024,  16, SECT_4K) },
+	{ "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
+	{ "w25q256", INFO(0xef4019, 0, 64 * 1024, 512,
+			  SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+			  SPI_NOR_4B_OPCODES) },
+	{ "w25q256jvm", INFO(0xef7019, 0, 64 * 1024, 512,
+			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "w25q256jw", INFO(0xef6019, 0, 64 * 1024, 512,
+			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "w25m512jv", INFO(0xef7119, 0, 64 * 1024, 1024,
+			    SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_DUAL_READ) },
+};
+
+/**
+ * winbond_set_4byte_addr_mode() - Set 4-byte address mode for Winbond flashes.
+ * @nor:	pointer to 'struct spi_nor'.
+ * @enable:	true to enter the 4-byte address mode, false to exit the 4-byte
+ *		address mode.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int winbond_set_4byte_addr_mode(struct spi_nor *nor, bool enable)
+{
+	int ret;
+
+	ret = spi_nor_set_4byte_addr_mode(nor, enable);
+	if (ret || enable)
+		return ret;
+
+	/*
+	 * On Winbond W25Q256FV, leaving 4byte mode causes the Extended Address
+	 * Register to be set to 1, so all 3-byte-address reads come from the
+	 * second 16M. We must clear the register to enable normal behavior.
+	 */
+	ret = spi_nor_write_enable(nor);
+	if (ret)
+		return ret;
+
+	ret = spi_nor_write_ear(nor, 0);
+	if (ret)
+		return ret;
+
+	return spi_nor_write_disable(nor);
+}
+
+static void winbond_default_init(struct spi_nor *nor)
+{
+	nor->params->set_4byte_addr_mode = winbond_set_4byte_addr_mode;
+}
+
+static const struct spi_nor_fixups winbond_fixups = {
+	.default_init = winbond_default_init,
+};
+
+const struct spi_nor_manufacturer spi_nor_winbond = {
+	.name = "winbond",
+	.parts = winbond_parts,
+	.nparts = ARRAY_SIZE(winbond_parts),
+	.fixups = &winbond_fixups,
+};
diff --git a/drivers/mtd/spi-nor/xilinx.c b/drivers/mtd/spi-nor/xilinx.c
new file mode 100644
index 0000000..1138bdb
--- /dev/null
+++ b/drivers/mtd/spi-nor/xilinx.c
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static const struct flash_info xilinx_parts[] = {
+	/* Xilinx S3AN Internal Flash */
+	{ "3S50AN", S3AN_INFO(0x1f2200, 64, 264) },
+	{ "3S200AN", S3AN_INFO(0x1f2400, 256, 264) },
+	{ "3S400AN", S3AN_INFO(0x1f2400, 256, 264) },
+	{ "3S700AN", S3AN_INFO(0x1f2500, 512, 264) },
+	{ "3S1400AN", S3AN_INFO(0x1f2600, 512, 528) },
+};
+
+/*
+ * This code converts an address to the Default Address Mode, that has non
+ * power of two page sizes. We must support this mode because it is the default
+ * mode supported by Xilinx tools, it can access the whole flash area and
+ * changing over to the Power-of-two mode is irreversible and corrupts the
+ * original data.
+ * Addr can safely be unsigned int, the biggest S3AN device is smaller than
+ * 4 MiB.
+ */
+static u32 s3an_convert_addr(struct spi_nor *nor, u32 addr)
+{
+	u32 offset, page;
+
+	offset = addr % nor->page_size;
+	page = addr / nor->page_size;
+	page <<= (nor->page_size > 512) ? 10 : 9;
+
+	return page | offset;
+}
+
+static int xilinx_nor_setup(struct spi_nor *nor,
+			    const struct spi_nor_hwcaps *hwcaps)
+{
+	int ret;
+
+	ret = spi_nor_xread_sr(nor, nor->bouncebuf);
+	if (ret)
+		return ret;
+
+	nor->erase_opcode = SPINOR_OP_XSE;
+	nor->program_opcode = SPINOR_OP_XPP;
+	nor->read_opcode = SPINOR_OP_READ;
+	nor->flags |= SNOR_F_NO_OP_CHIP_ERASE;
+
+	/*
+	 * This flashes have a page size of 264 or 528 bytes (known as
+	 * Default addressing mode). It can be changed to a more standard
+	 * Power of two mode where the page size is 256/512. This comes
+	 * with a price: there is 3% less of space, the data is corrupted
+	 * and the page size cannot be changed back to default addressing
+	 * mode.
+	 *
+	 * The current addressing mode can be read from the XRDSR register
+	 * and should not be changed, because is a destructive operation.
+	 */
+	if (nor->bouncebuf[0] & XSR_PAGESIZE) {
+		/* Flash in Power of 2 mode */
+		nor->page_size = (nor->page_size == 264) ? 256 : 512;
+		nor->mtd.writebufsize = nor->page_size;
+		nor->mtd.size = 8 * nor->page_size * nor->info->n_sectors;
+		nor->mtd.erasesize = 8 * nor->page_size;
+	} else {
+		/* Flash in Default addressing mode */
+		nor->params->convert_addr = s3an_convert_addr;
+		nor->mtd.erasesize = nor->info->sector_size;
+	}
+
+	return 0;
+}
+
+static void xilinx_post_sfdp_fixups(struct spi_nor *nor)
+{
+	nor->params->setup = xilinx_nor_setup;
+}
+
+static const struct spi_nor_fixups xilinx_fixups = {
+	.post_sfdp = xilinx_post_sfdp_fixups,
+};
+
+const struct spi_nor_manufacturer spi_nor_xilinx = {
+	.name = "xilinx",
+	.parts = xilinx_parts,
+	.nparts = ARRAY_SIZE(xilinx_parts),
+	.fixups = &xilinx_fixups,
+};
diff --git a/drivers/mtd/spi-nor/xmc.c b/drivers/mtd/spi-nor/xmc.c
new file mode 100644
index 0000000..2c7773b
--- /dev/null
+++ b/drivers/mtd/spi-nor/xmc.c
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static const struct flash_info xmc_parts[] = {
+	/* XMC (Wuhan Xinxin Semiconductor Manufacturing Corp.) */
+	{ "XM25QH64A", INFO(0x207017, 0, 64 * 1024, 128,
+			    SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "XM25QH128A", INFO(0x207018, 0, 64 * 1024, 256,
+			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+};
+
+const struct spi_nor_manufacturer spi_nor_xmc = {
+	.name = "xmc",
+	.parts = xmc_parts,
+	.nparts = ARRAY_SIZE(xmc_parts),
+};
diff --git a/drivers/mtd/ubi/attach.c b/drivers/mtd/ubi/attach.c
index ea7440a..ae5abe4 100644
--- a/drivers/mtd/ubi/attach.c
+++ b/drivers/mtd/ubi/attach.c
@@ -1059,7 +1059,7 @@ static int scan_peb(struct ubi_device *ubi, struct ubi_attach_info *ai,
 			 * be a result of power cut during erasure.
 			 */
 			ai->maybe_bad_peb_count += 1;
-		/* fall through */
+		fallthrough;
 	case UBI_IO_BAD_HDR:
 			/*
 			 * If we're facing a bad VID header we have to drop *all*
diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index 2f93c25..12c0234 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -1342,10 +1342,10 @@ static int bytes_str_to_int(const char *str)
 	switch (*endp) {
 	case 'G':
 		result *= 1024;
-		/* fall through */
+		fallthrough;
 	case 'M':
 		result *= 1024;
-		/* fall through */
+		fallthrough;
 	case 'K':
 		result *= 1024;
 		if (endp[1] == 'i' && endp[2] == 'B')
diff --git a/drivers/mtd/ubi/fastmap-wl.c b/drivers/mtd/ubi/fastmap-wl.c
index 426820a..b486250 100644
--- a/drivers/mtd/ubi/fastmap-wl.c
+++ b/drivers/mtd/ubi/fastmap-wl.c
@@ -39,6 +39,13 @@ static struct ubi_wl_entry *find_anchor_wl_entry(struct rb_root *root)
 	return victim;
 }
 
+static inline void return_unused_peb(struct ubi_device *ubi,
+				     struct ubi_wl_entry *e)
+{
+	wl_tree_add(e, &ubi->free);
+	ubi->free_count++;
+}
+
 /**
  * return_unused_pool_pebs - returns unused PEB to the free tree.
  * @ubi: UBI device description object
@@ -52,8 +59,7 @@ static void return_unused_pool_pebs(struct ubi_device *ubi,
 
 	for (i = pool->used; i < pool->size; i++) {
 		e = ubi->lookuptbl[pool->pebs[i]];
-		wl_tree_add(e, &ubi->free);
-		ubi->free_count++;
+		return_unused_peb(ubi, e);
 	}
 }
 
@@ -361,6 +367,11 @@ static void ubi_fastmap_close(struct ubi_device *ubi)
 	return_unused_pool_pebs(ubi, &ubi->fm_pool);
 	return_unused_pool_pebs(ubi, &ubi->fm_wl_pool);
 
+	if (ubi->fm_anchor) {
+		return_unused_peb(ubi, ubi->fm_anchor);
+		ubi->fm_anchor = NULL;
+	}
+
 	if (ubi->fm) {
 		for (i = 0; i < ubi->fm->used_blocks; i++)
 			kfree(ubi->fm->e[i]);
diff --git a/drivers/mtd/ubi/ubi-media.h b/drivers/mtd/ubi/ubi-media.h
index b5fe8f82..386db05 100644
--- a/drivers/mtd/ubi/ubi-media.h
+++ b/drivers/mtd/ubi/ubi-media.h
@@ -498,6 +498,6 @@ struct ubi_fm_volhdr {
 struct ubi_fm_eba {
 	__be32 magic;
 	__be32 reserved_pebs;
-	__be32 pnum[0];
+	__be32 pnum[];
 } __packed;
 #endif /* !__UBI_MEDIA_H__ */
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index 837d690..5146cce 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -1875,7 +1875,8 @@ int ubi_wl_init(struct ubi_device *ubi, struct ubi_attach_info *ai)
 		goto out_free;
 
 #ifdef CONFIG_MTD_UBI_FASTMAP
-	ubi_ensure_anchor_pebs(ubi);
+	if (!ubi->ro_mode && !ubi->fm_disabled)
+		ubi_ensure_anchor_pebs(ubi);
 #endif
 	return 0;
 
diff --git a/drivers/net/caif/Kconfig b/drivers/net/caif/Kconfig
index e74e2bb..9db0570 100644
--- a/drivers/net/caif/Kconfig
+++ b/drivers/net/caif/Kconfig
@@ -58,8 +58,4 @@
 	---help---
 	  The CAIF driver for CAIF over Virtio.
 
-if CAIF_VIRTIO
-source "drivers/vhost/Kconfig.vringh"
-endif
-
 endif # CAIF_DRIVERS
diff --git a/drivers/net/can/slcan.c b/drivers/net/can/slcan.c
index 086dfb1..91cdc0a 100644
--- a/drivers/net/can/slcan.c
+++ b/drivers/net/can/slcan.c
@@ -148,7 +148,7 @@ static void slc_bump(struct slcan *sl)
 	u32 tmpid;
 	char *cmd = sl->rbuff;
 
-	cf.can_id = 0;
+	memset(&cf, 0, sizeof(cf));
 
 	switch (*cmd) {
 	case 'r':
@@ -187,8 +187,6 @@ static void slc_bump(struct slcan *sl)
 	else
 		return;
 
-	*(u64 *) (&cf.data) = 0; /* clear payload */
-
 	/* RTR frames may have a dlc > 0 but they never have any data bytes */
 	if (!(cf.can_id & CAN_RTR_FLAG)) {
 		for (i = 0; i < cf.can_dlc; i++) {
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index affa5c6..c7ac63f 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -480,7 +480,7 @@ static int bcm_sf2_mdio_register(struct dsa_switch *ds)
 	priv->slave_mii_bus->parent = ds->dev->parent;
 	priv->slave_mii_bus->phy_mask = ~priv->indir_phy_mask;
 
-	err = of_mdiobus_register(priv->slave_mii_bus, dn);
+	err = mdiobus_register(priv->slave_mii_bus);
 	if (err && dn)
 		of_node_put(dn);
 
@@ -1079,6 +1079,7 @@ static int bcm_sf2_sw_probe(struct platform_device *pdev)
 	const struct bcm_sf2_of_data *data;
 	struct b53_platform_data *pdata;
 	struct dsa_switch_ops *ops;
+	struct device_node *ports;
 	struct bcm_sf2_priv *priv;
 	struct b53_device *dev;
 	struct dsa_switch *ds;
@@ -1146,7 +1147,11 @@ static int bcm_sf2_sw_probe(struct platform_device *pdev)
 	set_bit(0, priv->cfp.used);
 	set_bit(0, priv->cfp.unique);
 
-	bcm_sf2_identify_ports(priv, dn->child);
+	ports = of_find_node_by_name(dn, "ports");
+	if (ports) {
+		bcm_sf2_identify_ports(priv, ports);
+		of_node_put(ports);
+	}
 
 	priv->irq0 = irq_of_parse_and_map(dn, 0);
 	priv->irq1 = irq_of_parse_and_map(dn, 1);
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index ef57552..5c444cd 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -67,58 +67,6 @@ static const struct mt7530_mib_desc mt7530_mib[] = {
 };
 
 static int
-mt7623_trgmii_write(struct mt7530_priv *priv,  u32 reg, u32 val)
-{
-	int ret;
-
-	ret =  regmap_write(priv->ethernet, TRGMII_BASE(reg), val);
-	if (ret < 0)
-		dev_err(priv->dev,
-			"failed to priv write register\n");
-	return ret;
-}
-
-static u32
-mt7623_trgmii_read(struct mt7530_priv *priv, u32 reg)
-{
-	int ret;
-	u32 val;
-
-	ret = regmap_read(priv->ethernet, TRGMII_BASE(reg), &val);
-	if (ret < 0) {
-		dev_err(priv->dev,
-			"failed to priv read register\n");
-		return ret;
-	}
-
-	return val;
-}
-
-static void
-mt7623_trgmii_rmw(struct mt7530_priv *priv, u32 reg,
-		  u32 mask, u32 set)
-{
-	u32 val;
-
-	val = mt7623_trgmii_read(priv, reg);
-	val &= ~mask;
-	val |= set;
-	mt7623_trgmii_write(priv, reg, val);
-}
-
-static void
-mt7623_trgmii_set(struct mt7530_priv *priv, u32 reg, u32 val)
-{
-	mt7623_trgmii_rmw(priv, reg, 0, val);
-}
-
-static void
-mt7623_trgmii_clear(struct mt7530_priv *priv, u32 reg, u32 val)
-{
-	mt7623_trgmii_rmw(priv, reg, val, 0);
-}
-
-static int
 core_read_mmd_indirect(struct mt7530_priv *priv, int prtad, int devad)
 {
 	struct mii_bus *bus = priv->bus;
@@ -530,27 +478,6 @@ mt7530_pad_clk_setup(struct dsa_switch *ds, int mode)
 		for (i = 0 ; i < NUM_TRGMII_CTRL; i++)
 			mt7530_rmw(priv, MT7530_TRGMII_RD(i),
 				   RD_TAP_MASK, RD_TAP(16));
-	else
-		if (priv->id != ID_MT7621)
-			mt7623_trgmii_set(priv, GSW_INTF_MODE,
-					  INTF_MODE_TRGMII);
-
-	return 0;
-}
-
-static int
-mt7623_pad_clk_setup(struct dsa_switch *ds)
-{
-	struct mt7530_priv *priv = ds->priv;
-	int i;
-
-	for (i = 0 ; i < NUM_TRGMII_CTRL; i++)
-		mt7623_trgmii_write(priv, GSW_TRGMII_TD_ODT(i),
-				    TD_DM_DRVP(8) | TD_DM_DRVN(8));
-
-	mt7623_trgmii_set(priv, GSW_TRGMII_RCK_CTRL, RX_RST | RXC_DQSISEL);
-	mt7623_trgmii_clear(priv, GSW_TRGMII_RCK_CTRL, RX_RST);
-
 	return 0;
 }
 
@@ -846,8 +773,9 @@ mt7530_port_set_vlan_unaware(struct dsa_switch *ds, int port)
 	 */
 	mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
 		   MT7530_PORT_MATRIX_MODE);
-	mt7530_rmw(priv, MT7530_PVC_P(port), VLAN_ATTR_MASK,
-		   VLAN_ATTR(MT7530_VLAN_TRANSPARENT));
+	mt7530_rmw(priv, MT7530_PVC_P(port), VLAN_ATTR_MASK | PVC_EG_TAG_MASK,
+		   VLAN_ATTR(MT7530_VLAN_TRANSPARENT) |
+		   PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT));
 
 	for (i = 0; i < MT7530_NUM_PORTS; i++) {
 		if (dsa_is_user_port(ds, i) &&
@@ -863,8 +791,8 @@ mt7530_port_set_vlan_unaware(struct dsa_switch *ds, int port)
 	if (all_user_ports_removed) {
 		mt7530_write(priv, MT7530_PCR_P(MT7530_CPU_PORT),
 			     PCR_MATRIX(dsa_user_ports(priv->ds)));
-		mt7530_write(priv, MT7530_PVC_P(MT7530_CPU_PORT),
-			     PORT_SPEC_TAG);
+		mt7530_write(priv, MT7530_PVC_P(MT7530_CPU_PORT), PORT_SPEC_TAG
+			     | PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT));
 	}
 }
 
@@ -890,8 +818,9 @@ mt7530_port_set_vlan_aware(struct dsa_switch *ds, int port)
 	/* Set the port as a user port which is to be able to recognize VID
 	 * from incoming packets before fetching entry within the VLAN table.
 	 */
-	mt7530_rmw(priv, MT7530_PVC_P(port), VLAN_ATTR_MASK,
-		   VLAN_ATTR(MT7530_VLAN_USER));
+	mt7530_rmw(priv, MT7530_PVC_P(port), VLAN_ATTR_MASK | PVC_EG_TAG_MASK,
+		   VLAN_ATTR(MT7530_VLAN_USER) |
+		   PVC_EG_TAG(MT7530_VLAN_EG_DISABLED));
 }
 
 static void
@@ -1303,10 +1232,6 @@ mt7530_setup(struct dsa_switch *ds)
 	dn = dsa_to_port(ds, MT7530_CPU_PORT)->master->dev.of_node->parent;
 
 	if (priv->id == ID_MT7530) {
-		priv->ethernet = syscon_node_to_regmap(dn);
-		if (IS_ERR(priv->ethernet))
-			return PTR_ERR(priv->ethernet);
-
 		regulator_set_voltage(priv->core_pwr, 1000000, 1000000);
 		ret = regulator_enable(priv->core_pwr);
 		if (ret < 0) {
@@ -1380,6 +1305,10 @@ mt7530_setup(struct dsa_switch *ds)
 			mt7530_cpu_port_enable(priv, i);
 		else
 			mt7530_port_disable(ds, i);
+
+		/* Enable consistent egress tag */
+		mt7530_rmw(priv, MT7530_PVC_P(i), PVC_EG_TAG_MASK,
+			   PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT));
 	}
 
 	/* Setup port 5 */
@@ -1403,6 +1332,9 @@ mt7530_setup(struct dsa_switch *ds)
 				continue;
 
 			phy_node = of_parse_phandle(mac_np, "phy-handle", 0);
+			if (!phy_node)
+				continue;
+
 			if (phy_node->parent == priv->dev->of_node->parent) {
 				ret = of_get_phy_mode(mac_np, &interface);
 				if (ret && ret != -ENODEV)
@@ -1465,14 +1397,6 @@ static void mt7530_phylink_mac_config(struct dsa_switch *ds, int port,
 		/* Setup TX circuit incluing relevant PAD and driving */
 		mt7530_pad_clk_setup(ds, state->interface);
 
-		if (priv->id == ID_MT7530) {
-			/* Setup RX circuit, relevant PAD and driving on the
-			 * host which must be placed after the setup on the
-			 * device side is all finished.
-			 */
-			mt7623_pad_clk_setup(ds);
-		}
-
 		priv->p6_interface = state->interface;
 		break;
 	default:
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index ef9b52f..979bb63 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -172,9 +172,16 @@ enum mt7530_port_mode {
 /* Register for port vlan control */
 #define MT7530_PVC_P(x)			(0x2010 + ((x) * 0x100))
 #define  PORT_SPEC_TAG			BIT(5)
+#define  PVC_EG_TAG(x)			(((x) & 0x7) << 8)
+#define  PVC_EG_TAG_MASK		PVC_EG_TAG(7)
 #define  VLAN_ATTR(x)			(((x) & 0x3) << 6)
 #define  VLAN_ATTR_MASK			VLAN_ATTR(3)
 
+enum mt7530_vlan_port_eg_tag {
+	MT7530_VLAN_EG_DISABLED = 0,
+	MT7530_VLAN_EG_CONSISTENT = 1,
+};
+
 enum mt7530_vlan_port_attr {
 	MT7530_VLAN_USER = 0,
 	MT7530_VLAN_TRANSPARENT = 3,
@@ -277,7 +284,6 @@ enum mt7530_vlan_port_attr {
 
 /* Registers for TRGMII on the both side */
 #define MT7530_TRGMII_RCK_CTRL		0x7a00
-#define GSW_TRGMII_RCK_CTRL		0x300
 #define  RX_RST				BIT(31)
 #define  RXC_DQSISEL			BIT(30)
 #define  DQSI1_TAP_MASK			(0x7f << 8)
@@ -286,31 +292,24 @@ enum mt7530_vlan_port_attr {
 #define  DQSI0_TAP(x)			((x) & 0x7f)
 
 #define MT7530_TRGMII_RCK_RTT		0x7a04
-#define GSW_TRGMII_RCK_RTT		0x304
 #define  DQS1_GATE			BIT(31)
 #define  DQS0_GATE			BIT(30)
 
 #define MT7530_TRGMII_RD(x)		(0x7a10 + (x) * 8)
-#define GSW_TRGMII_RD(x)		(0x310 + (x) * 8)
 #define  BSLIP_EN			BIT(31)
 #define  EDGE_CHK			BIT(30)
 #define  RD_TAP_MASK			0x7f
 #define  RD_TAP(x)			((x) & 0x7f)
 
-#define GSW_TRGMII_TXCTRL		0x340
 #define MT7530_TRGMII_TXCTRL		0x7a40
 #define  TRAIN_TXEN			BIT(31)
 #define  TXC_INV			BIT(30)
 #define  TX_RST				BIT(28)
 
 #define MT7530_TRGMII_TD_ODT(i)		(0x7a54 + 8 * (i))
-#define GSW_TRGMII_TD_ODT(i)		(0x354 + 8 * (i))
 #define  TD_DM_DRVP(x)			((x) & 0xf)
 #define  TD_DM_DRVN(x)			(((x) & 0xf) << 4)
 
-#define GSW_INTF_MODE			0x390
-#define  INTF_MODE_TRGMII		BIT(1)
-
 #define MT7530_TRGMII_TCK_CTRL		0x7a78
 #define  TCK_TAP(x)			(((x) & 0xf) << 8)
 
@@ -443,7 +442,6 @@ static const char *p5_intf_modes(unsigned int p5_interface)
  * @ds:			The pointer to the dsa core structure
  * @bus:		The bus used for the device and built-in PHY
  * @rstc:		The pointer to reset control used by MCM
- * @ethernet:		The regmap used for access TRGMII-based registers
  * @core_pwr:		The power supplied into the core
  * @io_pwr:		The power supplied into the I/O
  * @reset:		The descriptor for GPIO line tied to its reset pin
@@ -460,7 +458,6 @@ struct mt7530_priv {
 	struct dsa_switch	*ds;
 	struct mii_bus		*bus;
 	struct reset_control	*rstc;
-	struct regmap		*ethernet;
 	struct regulator	*core_pwr;
 	struct regulator	*io_pwr;
 	struct gpio_desc	*reset;
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 2215932..dd8a566 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -709,7 +709,8 @@ static void mv88e6xxx_mac_link_down(struct dsa_switch *ds, int port,
 	ops = chip->info->ops;
 
 	mv88e6xxx_reg_lock(chip);
-	if (!mv88e6xxx_port_ppu_updates(chip, port) && ops->port_set_link)
+	if ((!mv88e6xxx_port_ppu_updates(chip, port) ||
+	     mode == MLO_AN_FIXED) && ops->port_set_link)
 		err = ops->port_set_link(chip, port, LINK_FORCED_DOWN);
 	mv88e6xxx_reg_unlock(chip);
 
@@ -731,7 +732,7 @@ static void mv88e6xxx_mac_link_up(struct dsa_switch *ds, int port,
 	ops = chip->info->ops;
 
 	mv88e6xxx_reg_lock(chip);
-	if (!mv88e6xxx_port_ppu_updates(chip, port)) {
+	if (!mv88e6xxx_port_ppu_updates(chip, port) || mode == MLO_AN_FIXED) {
 		/* FIXME: for an automedia port, should we force the link
 		 * down here - what if the link comes up due to "other" media
 		 * while we're bringing the port up, how is the exclusivity
diff --git a/drivers/net/dsa/ocelot/felix.c b/drivers/net/dsa/ocelot/felix.c
index 79ca3aad..d0a3764 100644
--- a/drivers/net/dsa/ocelot/felix.c
+++ b/drivers/net/dsa/ocelot/felix.c
@@ -46,11 +46,8 @@ static int felix_fdb_add(struct dsa_switch *ds, int port,
 			 const unsigned char *addr, u16 vid)
 {
 	struct ocelot *ocelot = ds->priv;
-	bool vlan_aware;
 
-	vlan_aware = dsa_port_is_vlan_filtering(dsa_to_port(ds, port));
-
-	return ocelot_fdb_add(ocelot, port, addr, vid, vlan_aware);
+	return ocelot_fdb_add(ocelot, port, addr, vid);
 }
 
 static int felix_fdb_del(struct dsa_switch *ds, int port,
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
index b71f9b0..a87264f 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
@@ -514,7 +514,7 @@ static void xgbe_isr_task(unsigned long data)
 				xgbe_disable_rx_tx_ints(pdata);
 
 				/* Turn on polling */
-				__napi_schedule_irqoff(&pdata->napi);
+				__napi_schedule(&pdata->napi);
 			}
 		} else {
 			/* Don't clear Rx/Tx status if doing per channel DMA
diff --git a/drivers/net/ethernet/aquantia/atlantic/macsec/macsec_api.c b/drivers/net/ethernet/aquantia/atlantic/macsec/macsec_api.c
index 97901c1..fbe9d88 100644
--- a/drivers/net/ethernet/aquantia/atlantic/macsec/macsec_api.c
+++ b/drivers/net/ethernet/aquantia/atlantic/macsec/macsec_api.c
@@ -491,7 +491,7 @@ get_ingress_preclass_record(struct aq_hw_s *hw,
 	rec->snap[1] = packed_record[8] & 0xFF;
 
 	rec->llc = (packed_record[8] >> 8) & 0xFF;
-	rec->llc = packed_record[9] << 8;
+	rec->llc |= packed_record[9] << 8;
 
 	rec->mac_sa[0] = packed_record[10];
 	rec->mac_sa[0] |= packed_record[11] << 16;
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
index 9638d65..517caed 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
@@ -6874,7 +6874,8 @@ int bnx2x_link_update(struct link_params *params, struct link_vars *vars)
 			case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY:
 			/* In this option, the first PHY makes sure to pass the
 			 * traffic through itself only.
-			 * Its not clear how to reset the link on the second phy
+			 * It's not clear how to reset the link on the second
+			 * phy.
 			 */
 				active_external_phy = EXT_PHY1;
 				break;
diff --git a/drivers/net/ethernet/cavium/common/cavium_ptp.h b/drivers/net/ethernet/cavium/common/cavium_ptp.h
index a04eccb..1e0ffe8 100644
--- a/drivers/net/ethernet/cavium/common/cavium_ptp.h
+++ b/drivers/net/ethernet/cavium/common/cavium_ptp.h
@@ -24,7 +24,7 @@ struct cavium_ptp {
 	struct ptp_clock *ptp_clock;
 };
 
-#if IS_ENABLED(CONFIG_CAVIUM_PTP)
+#if IS_REACHABLE(CONFIG_CAVIUM_PTP)
 
 struct cavium_ptp *cavium_ptp_get(void);
 void cavium_ptp_put(struct cavium_ptp *ptp);
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index 75fde0d..a70018f 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -3132,7 +3132,6 @@ static int cxgb_set_mac_addr(struct net_device *dev, void *p)
 		return ret;
 
 	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
-	pi->xact_addr_filt = ret;
 	return 0;
 }
 
@@ -6672,6 +6671,10 @@ static void shutdown_one(struct pci_dev *pdev)
 			if (adapter->port[i]->reg_state == NETREG_REGISTERED)
 				cxgb_close(adapter->port[i]);
 
+		rtnl_lock();
+		cxgb4_mqprio_stop_offload(adapter);
+		rtnl_unlock();
+
 		if (is_uld(adapter)) {
 			detach_ulds(adapter);
 			t4_uld_clean_up(adapter);
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_mqprio.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_mqprio.c
index ec3eb45..e6af490 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_mqprio.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_mqprio.c
@@ -301,6 +301,7 @@ static void cxgb4_mqprio_free_hw_resources(struct net_device *dev)
 			cxgb4_clear_msix_aff(eorxq->msix->vec,
 					     eorxq->msix->aff_mask);
 			free_irq(eorxq->msix->vec, &eorxq->rspq);
+			cxgb4_free_msix_idx_in_bmap(adap, eorxq->msix->idx);
 		}
 
 		free_rspq_fl(adap, &eorxq->rspq, &eorxq->fl);
@@ -611,6 +612,28 @@ int cxgb4_setup_tc_mqprio(struct net_device *dev,
 	return ret;
 }
 
+void cxgb4_mqprio_stop_offload(struct adapter *adap)
+{
+	struct cxgb4_tc_port_mqprio *tc_port_mqprio;
+	struct net_device *dev;
+	u8 i;
+
+	if (!adap->tc_mqprio || !adap->tc_mqprio->port_mqprio)
+		return;
+
+	for_each_port(adap, i) {
+		dev = adap->port[i];
+		if (!dev)
+			continue;
+
+		tc_port_mqprio = &adap->tc_mqprio->port_mqprio[i];
+		if (!tc_port_mqprio->mqprio.qopt.num_tc)
+			continue;
+
+		cxgb4_mqprio_disable_offload(dev);
+	}
+}
+
 int cxgb4_init_tc_mqprio(struct adapter *adap)
 {
 	struct cxgb4_tc_port_mqprio *tc_port_mqprio, *port_mqprio;
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_mqprio.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_mqprio.h
index c532f1e..ff87941 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_mqprio.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_mqprio.h
@@ -38,6 +38,7 @@ struct cxgb4_tc_mqprio {
 
 int cxgb4_setup_tc_mqprio(struct net_device *dev,
 			  struct tc_mqprio_qopt_offload *mqprio);
+void cxgb4_mqprio_stop_offload(struct adapter *adap);
 int cxgb4_init_tc_mqprio(struct adapter *adap);
 void cxgb4_cleanup_tc_mqprio(struct adapter *adap);
 #endif /* __CXGB4_TC_MQPRIO_H__ */
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
index 239f678..2a3480f 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
@@ -3742,7 +3742,7 @@ int t4_phy_fw_ver(struct adapter *adap, int *phy_fw_ver)
 		 FW_PARAMS_PARAM_Z_V(FW_PARAMS_PARAM_DEV_PHYFW_VERSION));
 	ret = t4_query_params(adap, adap->mbox, adap->pf, 0, 1,
 			      &param, &val);
-	if (ret < 0)
+	if (ret)
 		return ret;
 	*phy_fw_ver = val;
 	return 0;
diff --git a/drivers/net/ethernet/dec/tulip/tulip_core.c b/drivers/net/ethernet/dec/tulip/tulip_core.c
index 48ea658..15efc29 100644
--- a/drivers/net/ethernet/dec/tulip/tulip_core.c
+++ b/drivers/net/ethernet/dec/tulip/tulip_core.c
@@ -1277,7 +1277,7 @@ static const struct net_device_ops tulip_netdev_ops = {
 #endif
 };
 
-const struct pci_device_id early_486_chipsets[] = {
+static const struct pci_device_id early_486_chipsets[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82424) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_496) },
 	{ },
diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index 835b781..8723620 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -1731,7 +1731,7 @@ static int ftgmac100_setup_clk(struct ftgmac100 *priv)
 	if (rc)
 		goto cleanup_clk;
 
-	/* RCLK is for RMII, typically used for NCSI. Optional because its not
+	/* RCLK is for RMII, typically used for NCSI. Optional because it's not
 	 * necessary if it's the AST2400 MAC, or the MAC is configured for
 	 * RGMII, or the controller is not an ASPEED-based controller.
 	 */
diff --git a/drivers/net/ethernet/freescale/fec.h b/drivers/net/ethernet/freescale/fec.h
index bd898f5..e74dd1f 100644
--- a/drivers/net/ethernet/freescale/fec.h
+++ b/drivers/net/ethernet/freescale/fec.h
@@ -488,6 +488,12 @@ struct fec_enet_priv_rx_q {
 	struct  sk_buff *rx_skbuff[RX_RING_SIZE];
 };
 
+struct fec_stop_mode_gpr {
+	struct regmap *gpr;
+	u8 reg;
+	u8 bit;
+};
+
 /* The FEC buffer descriptors track the ring buffers.  The rx_bd_base and
  * tx_bd_base always point to the base of the buffer descriptors.  The
  * cur_rx and cur_tx point to the currently available buffer.
@@ -562,6 +568,7 @@ struct fec_enet_private {
 	int hwts_tx_en;
 	struct delayed_work time_keep;
 	struct regulator *reg_phy;
+	struct fec_stop_mode_gpr stop_gpr;
 
 	unsigned int tx_align;
 	unsigned int rx_align;
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index c1c267b..dc6f876 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -62,6 +62,8 @@
 #include <linux/if_vlan.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/prefetch.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
 #include <soc/imx/cpuidle.h>
 
 #include <asm/cacheflush.h>
@@ -84,6 +86,56 @@ static void fec_enet_itr_coal_init(struct net_device *ndev);
 #define FEC_ENET_OPD_V	0xFFF0
 #define FEC_MDIO_PM_TIMEOUT  100 /* ms */
 
+struct fec_devinfo {
+	u32 quirks;
+	u8 stop_gpr_reg;
+	u8 stop_gpr_bit;
+};
+
+static const struct fec_devinfo fec_imx25_info = {
+	.quirks = FEC_QUIRK_USE_GASKET | FEC_QUIRK_MIB_CLEAR |
+		  FEC_QUIRK_HAS_FRREG,
+};
+
+static const struct fec_devinfo fec_imx27_info = {
+	.quirks = FEC_QUIRK_MIB_CLEAR | FEC_QUIRK_HAS_FRREG,
+};
+
+static const struct fec_devinfo fec_imx28_info = {
+	.quirks = FEC_QUIRK_ENET_MAC | FEC_QUIRK_SWAP_FRAME |
+		  FEC_QUIRK_SINGLE_MDIO | FEC_QUIRK_HAS_RACC |
+		  FEC_QUIRK_HAS_FRREG,
+};
+
+static const struct fec_devinfo fec_imx6q_info = {
+	.quirks = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT |
+		  FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM |
+		  FEC_QUIRK_HAS_VLAN | FEC_QUIRK_ERR006358 |
+		  FEC_QUIRK_HAS_RACC,
+	.stop_gpr_reg = 0x34,
+	.stop_gpr_bit = 27,
+};
+
+static const struct fec_devinfo fec_mvf600_info = {
+	.quirks = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_RACC,
+};
+
+static const struct fec_devinfo fec_imx6x_info = {
+	.quirks = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT |
+		  FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM |
+		  FEC_QUIRK_HAS_VLAN | FEC_QUIRK_HAS_AVB |
+		  FEC_QUIRK_ERR007885 | FEC_QUIRK_BUG_CAPTURE |
+		  FEC_QUIRK_HAS_RACC | FEC_QUIRK_HAS_COALESCE,
+};
+
+static const struct fec_devinfo fec_imx6ul_info = {
+	.quirks = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT |
+		  FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM |
+		  FEC_QUIRK_HAS_VLAN | FEC_QUIRK_ERR007885 |
+		  FEC_QUIRK_BUG_CAPTURE | FEC_QUIRK_HAS_RACC |
+		  FEC_QUIRK_HAS_COALESCE,
+};
+
 static struct platform_device_id fec_devtype[] = {
 	{
 		/* keep it for coldfire */
@@ -91,39 +143,25 @@ static struct platform_device_id fec_devtype[] = {
 		.driver_data = 0,
 	}, {
 		.name = "imx25-fec",
-		.driver_data = FEC_QUIRK_USE_GASKET | FEC_QUIRK_MIB_CLEAR |
-			       FEC_QUIRK_HAS_FRREG,
+		.driver_data = (kernel_ulong_t)&fec_imx25_info,
 	}, {
 		.name = "imx27-fec",
-		.driver_data = FEC_QUIRK_MIB_CLEAR | FEC_QUIRK_HAS_FRREG,
+		.driver_data = (kernel_ulong_t)&fec_imx27_info,
 	}, {
 		.name = "imx28-fec",
-		.driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_SWAP_FRAME |
-				FEC_QUIRK_SINGLE_MDIO | FEC_QUIRK_HAS_RACC |
-				FEC_QUIRK_HAS_FRREG,
+		.driver_data = (kernel_ulong_t)&fec_imx28_info,
 	}, {
 		.name = "imx6q-fec",
-		.driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT |
-				FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM |
-				FEC_QUIRK_HAS_VLAN | FEC_QUIRK_ERR006358 |
-				FEC_QUIRK_HAS_RACC,
+		.driver_data = (kernel_ulong_t)&fec_imx6q_info,
 	}, {
 		.name = "mvf600-fec",
-		.driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_RACC,
+		.driver_data = (kernel_ulong_t)&fec_mvf600_info,
 	}, {
 		.name = "imx6sx-fec",
-		.driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT |
-				FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM |
-				FEC_QUIRK_HAS_VLAN | FEC_QUIRK_HAS_AVB |
-				FEC_QUIRK_ERR007885 | FEC_QUIRK_BUG_CAPTURE |
-				FEC_QUIRK_HAS_RACC | FEC_QUIRK_HAS_COALESCE,
+		.driver_data = (kernel_ulong_t)&fec_imx6x_info,
 	}, {
 		.name = "imx6ul-fec",
-		.driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT |
-				FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM |
-				FEC_QUIRK_HAS_VLAN | FEC_QUIRK_ERR007885 |
-				FEC_QUIRK_BUG_CAPTURE | FEC_QUIRK_HAS_RACC |
-				FEC_QUIRK_HAS_COALESCE,
+		.driver_data = (kernel_ulong_t)&fec_imx6ul_info,
 	}, {
 		/* sentinel */
 	}
@@ -1092,11 +1130,28 @@ fec_restart(struct net_device *ndev)
 
 }
 
+static void fec_enet_stop_mode(struct fec_enet_private *fep, bool enabled)
+{
+	struct fec_platform_data *pdata = fep->pdev->dev.platform_data;
+	struct fec_stop_mode_gpr *stop_gpr = &fep->stop_gpr;
+
+	if (stop_gpr->gpr) {
+		if (enabled)
+			regmap_update_bits(stop_gpr->gpr, stop_gpr->reg,
+					   BIT(stop_gpr->bit),
+					   BIT(stop_gpr->bit));
+		else
+			regmap_update_bits(stop_gpr->gpr, stop_gpr->reg,
+					   BIT(stop_gpr->bit), 0);
+	} else if (pdata && pdata->sleep_mode_enable) {
+		pdata->sleep_mode_enable(enabled);
+	}
+}
+
 static void
 fec_stop(struct net_device *ndev)
 {
 	struct fec_enet_private *fep = netdev_priv(ndev);
-	struct fec_platform_data *pdata = fep->pdev->dev.platform_data;
 	u32 rmii_mode = readl(fep->hwp + FEC_R_CNTRL) & (1 << 8);
 	u32 val;
 
@@ -1125,9 +1180,7 @@ fec_stop(struct net_device *ndev)
 		val = readl(fep->hwp + FEC_ECNTRL);
 		val |= (FEC_ECR_MAGICEN | FEC_ECR_SLEEP);
 		writel(val, fep->hwp + FEC_ECNTRL);
-
-		if (pdata && pdata->sleep_mode_enable)
-			pdata->sleep_mode_enable(true);
+		fec_enet_stop_mode(fep, true);
 	}
 	writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED);
 
@@ -3398,6 +3451,37 @@ static int fec_enet_get_irq_cnt(struct platform_device *pdev)
 	return irq_cnt;
 }
 
+static int fec_enet_init_stop_mode(struct fec_enet_private *fep,
+				   struct fec_devinfo *dev_info,
+				   struct device_node *np)
+{
+	struct device_node *gpr_np;
+	int ret = 0;
+
+	if (!dev_info)
+		return 0;
+
+	gpr_np = of_parse_phandle(np, "gpr", 0);
+	if (!gpr_np)
+		return 0;
+
+	fep->stop_gpr.gpr = syscon_node_to_regmap(gpr_np);
+	if (IS_ERR(fep->stop_gpr.gpr)) {
+		dev_err(&fep->pdev->dev, "could not find gpr regmap\n");
+		ret = PTR_ERR(fep->stop_gpr.gpr);
+		fep->stop_gpr.gpr = NULL;
+		goto out;
+	}
+
+	fep->stop_gpr.reg = dev_info->stop_gpr_reg;
+	fep->stop_gpr.bit = dev_info->stop_gpr_bit;
+
+out:
+	of_node_put(gpr_np);
+
+	return ret;
+}
+
 static int
 fec_probe(struct platform_device *pdev)
 {
@@ -3413,6 +3497,7 @@ fec_probe(struct platform_device *pdev)
 	int num_rx_qs;
 	char irq_name[8];
 	int irq_cnt;
+	struct fec_devinfo *dev_info;
 
 	fec_enet_get_queue_num(pdev, &num_tx_qs, &num_rx_qs);
 
@@ -3430,7 +3515,9 @@ fec_probe(struct platform_device *pdev)
 	of_id = of_match_device(fec_dt_ids, &pdev->dev);
 	if (of_id)
 		pdev->id_entry = of_id->data;
-	fep->quirks = pdev->id_entry->driver_data;
+	dev_info = (struct fec_devinfo *)pdev->id_entry->driver_data;
+	if (dev_info)
+		fep->quirks = dev_info->quirks;
 
 	fep->netdev = ndev;
 	fep->num_rx_queues = num_rx_qs;
@@ -3464,6 +3551,10 @@ fec_probe(struct platform_device *pdev)
 	if (of_get_property(np, "fsl,magic-packet", NULL))
 		fep->wol_flag |= FEC_WOL_HAS_MAGIC_PACKET;
 
+	ret = fec_enet_init_stop_mode(fep, dev_info, np);
+	if (ret)
+		goto failed_stop_mode;
+
 	phy_node = of_parse_phandle(np, "phy-handle", 0);
 	if (!phy_node && of_phy_is_fixed_link(np)) {
 		ret = of_phy_register_fixed_link(np);
@@ -3632,6 +3723,7 @@ fec_probe(struct platform_device *pdev)
 	if (of_phy_is_fixed_link(np))
 		of_phy_deregister_fixed_link(np);
 	of_node_put(phy_node);
+failed_stop_mode:
 failed_phy:
 	dev_id--;
 failed_ioremap:
@@ -3709,7 +3801,6 @@ static int __maybe_unused fec_resume(struct device *dev)
 {
 	struct net_device *ndev = dev_get_drvdata(dev);
 	struct fec_enet_private *fep = netdev_priv(ndev);
-	struct fec_platform_data *pdata = fep->pdev->dev.platform_data;
 	int ret;
 	int val;
 
@@ -3727,8 +3818,8 @@ static int __maybe_unused fec_resume(struct device *dev)
 			goto failed_clk;
 		}
 		if (fep->wol_flag & FEC_WOL_FLAG_ENABLE) {
-			if (pdata && pdata->sleep_mode_enable)
-				pdata->sleep_mode_enable(false);
+			fec_enet_stop_mode(fep, false);
+
 			val = readl(fep->hwp + FEC_ECNTRL);
 			val &= ~(FEC_ECR_MAGICEN | FEC_ECR_SLEEP);
 			writel(val, fep->hwp + FEC_ECNTRL);
diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index 306a4e5..5b190c2 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -3508,9 +3508,9 @@ static pci_ers_result_t ice_pci_err_slot_reset(struct pci_dev *pdev)
 			result = PCI_ERS_RESULT_DISCONNECT;
 	}
 
-	err = pci_cleanup_aer_uncorrect_error_status(pdev);
+	err = pci_aer_clear_nonfatal_status(pdev);
 	if (err)
-		dev_dbg(&pdev->dev, "pci_cleanup_aer_uncorrect_error_status failed, error %d\n",
+		dev_dbg(&pdev->dev, "pci_aer_clear_nonfatal_status() failed, error %d\n",
 			err);
 		/* non-fatal, continue */
 
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 5be61f7..5188977 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -5383,7 +5383,7 @@ static int __init mvneta_driver_init(void)
 {
 	int ret;
 
-	ret = cpuhp_setup_state_multi(CPUHP_AP_ONLINE_DYN, "net/mvmeta:online",
+	ret = cpuhp_setup_state_multi(CPUHP_AP_ONLINE_DYN, "net/mvneta:online",
 				      mvneta_cpu_online,
 				      mvneta_cpu_down_prepare);
 	if (ret < 0)
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index 8d28f90..0904710 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -65,6 +65,17 @@ u32 mtk_r32(struct mtk_eth *eth, unsigned reg)
 	return __raw_readl(eth->base + reg);
 }
 
+u32 mtk_m32(struct mtk_eth *eth, u32 mask, u32 set, unsigned reg)
+{
+	u32 val;
+
+	val = mtk_r32(eth, reg);
+	val &= ~mask;
+	val |= set;
+	mtk_w32(eth, val, reg);
+	return reg;
+}
+
 static int mtk_mdio_busy_wait(struct mtk_eth *eth)
 {
 	unsigned long t_start = jiffies;
@@ -193,7 +204,7 @@ static void mtk_mac_config(struct phylink_config *config, unsigned int mode,
 	struct mtk_mac *mac = container_of(config, struct mtk_mac,
 					   phylink_config);
 	struct mtk_eth *eth = mac->hw;
-	u32 mcr_cur, mcr_new, sid;
+	u32 mcr_cur, mcr_new, sid, i;
 	int val, ge_mode, err;
 
 	/* MT76x8 has no hardware settings between for the MAC */
@@ -255,6 +266,17 @@ static void mtk_mac_config(struct phylink_config *config, unsigned int mode,
 				    PHY_INTERFACE_MODE_TRGMII)
 					mtk_gmac0_rgmii_adjust(mac->hw,
 							       state->speed);
+
+				/* mt7623_pad_clk_setup */
+				for (i = 0 ; i < NUM_TRGMII_CTRL; i++)
+					mtk_w32(mac->hw,
+						TD_DM_DRVP(8) | TD_DM_DRVN(8),
+						TRGMII_TD_ODT(i));
+
+				/* Assert/release MT7623 RXC reset */
+				mtk_m32(mac->hw, 0, RXC_RST | RXC_DQSISEL,
+					TRGMII_RCK_CTRL);
+				mtk_m32(mac->hw, RXC_RST, 0, TRGMII_RCK_CTRL);
 			}
 		}
 
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
index 85830fe..454cfcd 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
@@ -352,10 +352,13 @@
 #define DQSI0(x)		((x << 0) & GENMASK(6, 0))
 #define DQSI1(x)		((x << 8) & GENMASK(14, 8))
 #define RXCTL_DMWTLAT(x)	((x << 16) & GENMASK(18, 16))
+#define RXC_RST			BIT(31)
 #define RXC_DQSISEL		BIT(30)
 #define RCK_CTRL_RGMII_1000	(RXC_DQSISEL | RXCTL_DMWTLAT(2) | DQSI1(16))
 #define RCK_CTRL_RGMII_10_100	RXCTL_DMWTLAT(2)
 
+#define NUM_TRGMII_CTRL		5
+
 /* TRGMII RXC control register */
 #define TRGMII_TCK_CTRL		0x10340
 #define TXCTL_DMWTLAT(x)	((x << 16) & GENMASK(18, 16))
@@ -363,6 +366,11 @@
 #define TCK_CTRL_RGMII_1000	TXCTL_DMWTLAT(2)
 #define TCK_CTRL_RGMII_10_100	(TXC_INV | TXCTL_DMWTLAT(2))
 
+/* TRGMII TX Drive Strength */
+#define TRGMII_TD_ODT(i)	(0x10354 + 8 * (i))
+#define  TD_DM_DRVP(x)		((x) & 0xf)
+#define  TD_DM_DRVN(x)		(((x) & 0xf) << 4)
+
 /* TRGMII Interface mode register */
 #define INTF_MODE		0x10390
 #define TRGMII_INTF_DIS		BIT(0)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/devlink.c b/drivers/net/ethernet/mellanox/mlx5/core/devlink.c
index bdeb291f..e94f0c4 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/devlink.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/devlink.c
@@ -23,7 +23,10 @@ static int mlx5_devlink_flash_update(struct devlink *devlink,
 	if (err)
 		return err;
 
-	return mlx5_firmware_flash(dev, fw, extack);
+	err = mlx5_firmware_flash(dev, fw, extack);
+	release_firmware(fw);
+
+	return err;
 }
 
 static u8 mlx5_fw_ver_major(u32 version)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.c b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.c
index ad3e3a6..16416ea 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.c
@@ -67,11 +67,9 @@ struct mlx5_ct_ft {
 	struct nf_flowtable *nf_ft;
 	struct mlx5_tc_ct_priv *ct_priv;
 	struct rhashtable ct_entries_ht;
-	struct list_head ct_entries_list;
 };
 
 struct mlx5_ct_entry {
-	struct list_head list;
 	u16 zone;
 	struct rhash_head node;
 	struct flow_rule *flow_rule;
@@ -617,8 +615,6 @@ mlx5_tc_ct_block_flow_offload_add(struct mlx5_ct_ft *ft,
 	if (err)
 		goto err_insert;
 
-	list_add(&entry->list, &ft->ct_entries_list);
-
 	return 0;
 
 err_insert:
@@ -646,7 +642,6 @@ mlx5_tc_ct_block_flow_offload_del(struct mlx5_ct_ft *ft,
 	WARN_ON(rhashtable_remove_fast(&ft->ct_entries_ht,
 				       &entry->node,
 				       cts_ht_params));
-	list_del(&entry->list);
 	kfree(entry);
 
 	return 0;
@@ -818,7 +813,6 @@ mlx5_tc_ct_add_ft_cb(struct mlx5_tc_ct_priv *ct_priv, u16 zone,
 	ft->zone = zone;
 	ft->nf_ft = nf_ft;
 	ft->ct_priv = ct_priv;
-	INIT_LIST_HEAD(&ft->ct_entries_list);
 	refcount_set(&ft->refcount, 1);
 
 	err = rhashtable_init(&ft->ct_entries_ht, &cts_ht_params);
@@ -847,12 +841,12 @@ mlx5_tc_ct_add_ft_cb(struct mlx5_tc_ct_priv *ct_priv, u16 zone,
 }
 
 static void
-mlx5_tc_ct_flush_ft(struct mlx5_tc_ct_priv *ct_priv, struct mlx5_ct_ft *ft)
+mlx5_tc_ct_flush_ft_entry(void *ptr, void *arg)
 {
-	struct mlx5_ct_entry *entry;
+	struct mlx5_tc_ct_priv *ct_priv = arg;
+	struct mlx5_ct_entry *entry = ptr;
 
-	list_for_each_entry(entry, &ft->ct_entries_list, list)
-		mlx5_tc_ct_entry_del_rules(ft->ct_priv, entry);
+	mlx5_tc_ct_entry_del_rules(ct_priv, entry);
 }
 
 static void
@@ -863,9 +857,10 @@ mlx5_tc_ct_del_ft_cb(struct mlx5_tc_ct_priv *ct_priv, struct mlx5_ct_ft *ft)
 
 	nf_flow_table_offload_del_cb(ft->nf_ft,
 				     mlx5_tc_ct_block_flow_offload, ft);
-	mlx5_tc_ct_flush_ft(ct_priv, ft);
 	rhashtable_remove_fast(&ct_priv->zone_ht, &ft->node, zone_params);
-	rhashtable_destroy(&ft->ct_entries_ht);
+	rhashtable_free_and_destroy(&ft->ct_entries_ht,
+				    mlx5_tc_ct_flush_ft_entry,
+				    ct_priv);
 	kfree(ft);
 }
 
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index dd7f338..f02150a 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -5526,8 +5526,8 @@ static void mlx5e_remove(struct mlx5_core_dev *mdev, void *vpriv)
 #ifdef CONFIG_MLX5_CORE_EN_DCB
 	mlx5e_dcbnl_delete_app(priv);
 #endif
-	mlx5e_devlink_port_unregister(priv);
 	unregister_netdev(priv->netdev);
+	mlx5e_devlink_port_unregister(priv);
 	mlx5e_detach(mdev, vpriv);
 	mlx5e_destroy_netdev(priv);
 }
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
index 2a0243e..55457f2 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
@@ -2050,29 +2050,30 @@ static int register_devlink_port(struct mlx5_core_dev *dev,
 	struct mlx5_eswitch_rep *rep = rpriv->rep;
 	struct netdev_phys_item_id ppid = {};
 	unsigned int dl_port_index = 0;
+	u16 pfnum;
 
 	if (!is_devlink_port_supported(dev, rpriv))
 		return 0;
 
 	mlx5e_rep_get_port_parent_id(rpriv->netdev, &ppid);
+	pfnum = PCI_FUNC(dev->pdev->devfn);
 
 	if (rep->vport == MLX5_VPORT_UPLINK) {
 		devlink_port_attrs_set(&rpriv->dl_port,
 				       DEVLINK_PORT_FLAVOUR_PHYSICAL,
-				       PCI_FUNC(dev->pdev->devfn), false, 0,
+				       pfnum, false, 0,
 				       &ppid.id[0], ppid.id_len);
 		dl_port_index = vport_to_devlink_port_index(dev, rep->vport);
 	} else if (rep->vport == MLX5_VPORT_PF) {
 		devlink_port_attrs_pci_pf_set(&rpriv->dl_port,
 					      &ppid.id[0], ppid.id_len,
-					      dev->pdev->devfn);
+					      pfnum);
 		dl_port_index = rep->vport;
 	} else if (mlx5_eswitch_is_vf_vport(dev->priv.eswitch,
 					    rpriv->rep->vport)) {
 		devlink_port_attrs_pci_vf_set(&rpriv->dl_port,
 					      &ppid.id[0], ppid.id_len,
-					      dev->pdev->devfn,
-					      rep->vport - 1);
+					      pfnum, rep->vport - 1);
 		dl_port_index = vport_to_devlink_port_index(dev, rep->vport);
 	}
 
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
index 438128d..a574c58 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
@@ -1343,7 +1343,8 @@ mlx5e_tc_add_fdb_flow(struct mlx5e_priv *priv,
 	if (err)
 		return err;
 
-	if (attr->action & MLX5_FLOW_CONTEXT_ACTION_MOD_HDR) {
+	if (attr->action & MLX5_FLOW_CONTEXT_ACTION_MOD_HDR &&
+	    !(attr->ct_attr.ct_action & TCA_CT_ACT_CLEAR)) {
 		err = mlx5e_attach_mod_hdr(priv, flow, parse_attr);
 		dealloc_mod_hdr_actions(&parse_attr->mod_hdr_acts);
 		if (err)
@@ -3558,12 +3559,13 @@ static int add_vlan_pop_action(struct mlx5e_priv *priv,
 			       struct mlx5_esw_flow_attr *attr,
 			       u32 *action)
 {
-	int nest_level = attr->parse_attr->filter_dev->lower_level;
 	struct flow_action_entry vlan_act = {
 		.id = FLOW_ACTION_VLAN_POP,
 	};
-	int err = 0;
+	int nest_level, err = 0;
 
+	nest_level = attr->parse_attr->filter_dev->lower_level -
+						priv->netdev->lower_level;
 	while (nest_level--) {
 		err = parse_tc_vlan_action(priv, &vlan_act, attr, action);
 		if (err)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h
index 39f42f9..c1848b57 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h
@@ -403,7 +403,6 @@ enum {
 	MLX5_ESW_ATTR_FLAG_VLAN_HANDLED  = BIT(0),
 	MLX5_ESW_ATTR_FLAG_SLOW_PATH     = BIT(1),
 	MLX5_ESW_ATTR_FLAG_NO_IN_PORT    = BIT(2),
-	MLX5_ESW_ATTR_FLAG_HAIRPIN	 = BIT(3),
 };
 
 struct mlx5_esw_flow_attr {
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
index f171eb2..b2e38e0 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
@@ -300,7 +300,6 @@ mlx5_eswitch_add_offloaded_rule(struct mlx5_eswitch *esw,
 	bool split = !!(attr->split_count);
 	struct mlx5_flow_handle *rule;
 	struct mlx5_flow_table *fdb;
-	bool hairpin = false;
 	int j, i = 0;
 
 	if (esw->mode != MLX5_ESWITCH_OFFLOADS)
@@ -398,21 +397,16 @@ mlx5_eswitch_add_offloaded_rule(struct mlx5_eswitch *esw,
 		goto err_esw_get;
 	}
 
-	if (mlx5_eswitch_termtbl_required(esw, attr, &flow_act, spec)) {
+	if (mlx5_eswitch_termtbl_required(esw, attr, &flow_act, spec))
 		rule = mlx5_eswitch_add_termtbl_rule(esw, fdb, spec, attr,
 						     &flow_act, dest, i);
-		hairpin = true;
-	} else {
+	else
 		rule = mlx5_add_flow_rules(fdb, spec, &flow_act, dest, i);
-	}
 	if (IS_ERR(rule))
 		goto err_add_rule;
 	else
 		atomic64_inc(&esw->offloads.num_flows);
 
-	if (hairpin)
-		attr->flags |= MLX5_ESW_ATTR_FLAG_HAIRPIN;
-
 	return rule;
 
 err_add_rule:
@@ -501,7 +495,7 @@ __mlx5_eswitch_del_rule(struct mlx5_eswitch *esw,
 
 	mlx5_del_flow_rules(rule);
 
-	if (attr->flags & MLX5_ESW_ATTR_FLAG_HAIRPIN) {
+	if (!(attr->flags & MLX5_ESW_ATTR_FLAG_SLOW_PATH)) {
 		/* unref the term table */
 		for (i = 0; i < MLX5_MAX_FLOW_FWD_VPORTS; i++) {
 			if (attr->dests[i].termtbl)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/health.c b/drivers/net/ethernet/mellanox/mlx5/core/health.c
index fa1665c..f99e175 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/health.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/health.c
@@ -243,7 +243,7 @@ void mlx5_error_sw_reset(struct mlx5_core_dev *dev)
 		if (mlx5_get_nic_state(dev) == MLX5_NIC_IFC_DISABLED)
 			break;
 
-		cond_resched();
+		msleep(20);
 	} while (!time_after(jiffies, end));
 
 	if (mlx5_get_nic_state(dev) != MLX5_NIC_IFC_DISABLED) {
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_flower.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_flower.c
index 2f76908..51117a5 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_flower.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_flower.c
@@ -150,14 +150,20 @@ static int mlxsw_sp_flower_parse_actions(struct mlxsw_sp *mlxsw_sp,
 			u8 prio = act->vlan.prio;
 			u16 vid = act->vlan.vid;
 
-			return mlxsw_sp_acl_rulei_act_vlan(mlxsw_sp, rulei,
-							   act->id, vid,
-							   proto, prio, extack);
+			err = mlxsw_sp_acl_rulei_act_vlan(mlxsw_sp, rulei,
+							  act->id, vid,
+							  proto, prio, extack);
+			if (err)
+				return err;
+			break;
 			}
 		case FLOW_ACTION_PRIORITY:
-			return mlxsw_sp_acl_rulei_act_priority(mlxsw_sp, rulei,
-							       act->priority,
-							       extack);
+			err = mlxsw_sp_acl_rulei_act_priority(mlxsw_sp, rulei,
+							      act->priority,
+							      extack);
+			if (err)
+				return err;
+			break;
 		case FLOW_ACTION_MANGLE: {
 			enum flow_action_mangle_base htype = act->mangle.htype;
 			__be32 be_mask = (__force __be32) act->mangle.mask;
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_trap.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_trap.c
index 9096ffd..fbf714d 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_trap.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_trap.c
@@ -643,7 +643,7 @@ static int mlxsw_sp_trap_policer_bs(u64 burst, u8 *p_burst_size,
 {
 	int bs = fls64(burst) - 1;
 
-	if (burst != (1 << bs)) {
+	if (burst != (BIT_ULL(bs))) {
 		NL_SET_ERR_MSG_MOD(extack, "Policer burst size is not power of two");
 		return -EINVAL;
 	}
diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
index b4731df..a8c48a4 100644
--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c
@@ -183,58 +183,11 @@ static void ocelot_vlan_mode(struct ocelot *ocelot, int port,
 	ocelot_write(ocelot, val, ANA_VLANMASK);
 }
 
-void ocelot_port_vlan_filtering(struct ocelot *ocelot, int port,
-				bool vlan_aware)
-{
-	struct ocelot_port *ocelot_port = ocelot->ports[port];
-	u32 val;
-
-	if (vlan_aware)
-		val = ANA_PORT_VLAN_CFG_VLAN_AWARE_ENA |
-		      ANA_PORT_VLAN_CFG_VLAN_POP_CNT(1);
-	else
-		val = 0;
-	ocelot_rmw_gix(ocelot, val,
-		       ANA_PORT_VLAN_CFG_VLAN_AWARE_ENA |
-		       ANA_PORT_VLAN_CFG_VLAN_POP_CNT_M,
-		       ANA_PORT_VLAN_CFG, port);
-
-	if (vlan_aware && !ocelot_port->vid)
-		/* If port is vlan-aware and tagged, drop untagged and priority
-		 * tagged frames.
-		 */
-		val = ANA_PORT_DROP_CFG_DROP_UNTAGGED_ENA |
-		      ANA_PORT_DROP_CFG_DROP_PRIO_S_TAGGED_ENA |
-		      ANA_PORT_DROP_CFG_DROP_PRIO_C_TAGGED_ENA;
-	else
-		val = 0;
-	ocelot_rmw_gix(ocelot, val,
-		       ANA_PORT_DROP_CFG_DROP_UNTAGGED_ENA |
-		       ANA_PORT_DROP_CFG_DROP_PRIO_S_TAGGED_ENA |
-		       ANA_PORT_DROP_CFG_DROP_PRIO_C_TAGGED_ENA,
-		       ANA_PORT_DROP_CFG, port);
-
-	if (vlan_aware) {
-		if (ocelot_port->vid)
-			/* Tag all frames except when VID == DEFAULT_VLAN */
-			val |= REW_TAG_CFG_TAG_CFG(1);
-		else
-			/* Tag all frames */
-			val |= REW_TAG_CFG_TAG_CFG(3);
-	} else {
-		/* Port tagging disabled. */
-		val = REW_TAG_CFG_TAG_CFG(0);
-	}
-	ocelot_rmw_gix(ocelot, val,
-		       REW_TAG_CFG_TAG_CFG_M,
-		       REW_TAG_CFG, port);
-}
-EXPORT_SYMBOL(ocelot_port_vlan_filtering);
-
 static int ocelot_port_set_native_vlan(struct ocelot *ocelot, int port,
 				       u16 vid)
 {
 	struct ocelot_port *ocelot_port = ocelot->ports[port];
+	u32 val = 0;
 
 	if (ocelot_port->vid != vid) {
 		/* Always permit deleting the native VLAN (vid = 0) */
@@ -251,9 +204,59 @@ static int ocelot_port_set_native_vlan(struct ocelot *ocelot, int port,
 		       REW_PORT_VLAN_CFG_PORT_VID_M,
 		       REW_PORT_VLAN_CFG, port);
 
+	if (ocelot_port->vlan_aware && !ocelot_port->vid)
+		/* If port is vlan-aware and tagged, drop untagged and priority
+		 * tagged frames.
+		 */
+		val = ANA_PORT_DROP_CFG_DROP_UNTAGGED_ENA |
+		      ANA_PORT_DROP_CFG_DROP_PRIO_S_TAGGED_ENA |
+		      ANA_PORT_DROP_CFG_DROP_PRIO_C_TAGGED_ENA;
+	ocelot_rmw_gix(ocelot, val,
+		       ANA_PORT_DROP_CFG_DROP_UNTAGGED_ENA |
+		       ANA_PORT_DROP_CFG_DROP_PRIO_S_TAGGED_ENA |
+		       ANA_PORT_DROP_CFG_DROP_PRIO_C_TAGGED_ENA,
+		       ANA_PORT_DROP_CFG, port);
+
+	if (ocelot_port->vlan_aware) {
+		if (ocelot_port->vid)
+			/* Tag all frames except when VID == DEFAULT_VLAN */
+			val = REW_TAG_CFG_TAG_CFG(1);
+		else
+			/* Tag all frames */
+			val = REW_TAG_CFG_TAG_CFG(3);
+	} else {
+		/* Port tagging disabled. */
+		val = REW_TAG_CFG_TAG_CFG(0);
+	}
+	ocelot_rmw_gix(ocelot, val,
+		       REW_TAG_CFG_TAG_CFG_M,
+		       REW_TAG_CFG, port);
+
 	return 0;
 }
 
+void ocelot_port_vlan_filtering(struct ocelot *ocelot, int port,
+				bool vlan_aware)
+{
+	struct ocelot_port *ocelot_port = ocelot->ports[port];
+	u32 val;
+
+	ocelot_port->vlan_aware = vlan_aware;
+
+	if (vlan_aware)
+		val = ANA_PORT_VLAN_CFG_VLAN_AWARE_ENA |
+		      ANA_PORT_VLAN_CFG_VLAN_POP_CNT(1);
+	else
+		val = 0;
+	ocelot_rmw_gix(ocelot, val,
+		       ANA_PORT_VLAN_CFG_VLAN_AWARE_ENA |
+		       ANA_PORT_VLAN_CFG_VLAN_POP_CNT_M,
+		       ANA_PORT_VLAN_CFG, port);
+
+	ocelot_port_set_native_vlan(ocelot, port, ocelot_port->vid);
+}
+EXPORT_SYMBOL(ocelot_port_vlan_filtering);
+
 /* Default vlan to clasify for untagged frames (may be zero) */
 static void ocelot_port_set_pvid(struct ocelot *ocelot, int port, u16 pvid)
 {
@@ -873,12 +876,12 @@ static void ocelot_get_stats64(struct net_device *dev,
 }
 
 int ocelot_fdb_add(struct ocelot *ocelot, int port,
-		   const unsigned char *addr, u16 vid, bool vlan_aware)
+		   const unsigned char *addr, u16 vid)
 {
 	struct ocelot_port *ocelot_port = ocelot->ports[port];
 
 	if (!vid) {
-		if (!vlan_aware)
+		if (!ocelot_port->vlan_aware)
 			/* If the bridge is not VLAN aware and no VID was
 			 * provided, set it to pvid to ensure the MAC entry
 			 * matches incoming untagged packets
@@ -905,7 +908,7 @@ static int ocelot_port_fdb_add(struct ndmsg *ndm, struct nlattr *tb[],
 	struct ocelot *ocelot = priv->port.ocelot;
 	int port = priv->chip_port;
 
-	return ocelot_fdb_add(ocelot, port, addr, vid, priv->vlan_aware);
+	return ocelot_fdb_add(ocelot, port, addr, vid);
 }
 
 int ocelot_fdb_del(struct ocelot *ocelot, int port,
@@ -1496,8 +1499,8 @@ static int ocelot_port_attr_set(struct net_device *dev,
 		ocelot_port_attr_ageing_set(ocelot, port, attr->u.ageing_time);
 		break;
 	case SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING:
-		priv->vlan_aware = attr->u.vlan_filtering;
-		ocelot_port_vlan_filtering(ocelot, port, priv->vlan_aware);
+		ocelot_port_vlan_filtering(ocelot, port,
+					   attr->u.vlan_filtering);
 		break;
 	case SWITCHDEV_ATTR_ID_BRIDGE_MC_DISABLED:
 		ocelot_port_attr_mc_set(ocelot, port, !attr->u.mc_disabled);
@@ -1868,7 +1871,6 @@ static int ocelot_netdevice_port_event(struct net_device *dev,
 			} else {
 				err = ocelot_port_bridge_leave(ocelot, port,
 							       info->upper_dev);
-				priv->vlan_aware = false;
 			}
 		}
 		if (netif_is_lag_master(info->upper_dev)) {
diff --git a/drivers/net/ethernet/mscc/ocelot.h b/drivers/net/ethernet/mscc/ocelot.h
index e34ef83..641af92 100644
--- a/drivers/net/ethernet/mscc/ocelot.h
+++ b/drivers/net/ethernet/mscc/ocelot.h
@@ -56,8 +56,6 @@ struct ocelot_port_private {
 	struct phy_device *phy;
 	u8 chip_port;
 
-	u8 vlan_aware;
-
 	struct phy *serdes;
 
 	struct ocelot_port_tc tc;
diff --git a/drivers/net/ethernet/neterion/s2io.c b/drivers/net/ethernet/neterion/s2io.c
index 0ec6b8e..67e6260 100644
--- a/drivers/net/ethernet/neterion/s2io.c
+++ b/drivers/net/ethernet/neterion/s2io.c
@@ -5155,7 +5155,7 @@ static int do_s2io_delete_unicast_mc(struct s2io_nic *sp, u64 addr)
 /* read mac entries from CAM */
 static u64 do_s2io_read_unicast_mc(struct s2io_nic *sp, int offset)
 {
-	u64 tmp64 = 0xffffffffffff0000ULL, val64;
+	u64 tmp64, val64;
 	struct XENA_dev_config __iomem *bar0 = sp->bar0;
 
 	/* read mac addr */
diff --git a/drivers/net/ethernet/pensando/ionic/ionic_lif.c b/drivers/net/ethernet/pensando/ionic/ionic_lif.c
index 4b8a760..5acf4f4 100644
--- a/drivers/net/ethernet/pensando/ionic/ionic_lif.c
+++ b/drivers/net/ethernet/pensando/ionic/ionic_lif.c
@@ -2127,6 +2127,8 @@ static void ionic_lif_handle_fw_up(struct ionic_lif *lif)
 	if (lif->registered)
 		ionic_lif_set_netdev_info(lif);
 
+	ionic_rx_filter_replay(lif);
+
 	if (netif_running(lif->netdev)) {
 		err = ionic_txrx_alloc(lif);
 		if (err)
@@ -2206,9 +2208,9 @@ static void ionic_lif_deinit(struct ionic_lif *lif)
 	if (!test_bit(IONIC_LIF_F_FW_RESET, lif->state)) {
 		cancel_work_sync(&lif->deferred.work);
 		cancel_work_sync(&lif->tx_timeout_work);
+		ionic_rx_filters_deinit(lif);
 	}
 
-	ionic_rx_filters_deinit(lif);
 	if (lif->netdev->features & NETIF_F_RXHASH)
 		ionic_lif_rss_deinit(lif);
 
@@ -2339,24 +2341,30 @@ static int ionic_station_set(struct ionic_lif *lif)
 	err = ionic_adminq_post_wait(lif, &ctx);
 	if (err)
 		return err;
-
+	netdev_dbg(lif->netdev, "found initial MAC addr %pM\n",
+		   ctx.comp.lif_getattr.mac);
 	if (is_zero_ether_addr(ctx.comp.lif_getattr.mac))
 		return 0;
 
-	memcpy(addr.sa_data, ctx.comp.lif_getattr.mac, netdev->addr_len);
-	addr.sa_family = AF_INET;
-	err = eth_prepare_mac_addr_change(netdev, &addr);
-	if (err) {
-		netdev_warn(lif->netdev, "ignoring bad MAC addr from NIC %pM - err %d\n",
-			    addr.sa_data, err);
-		return 0;
+	if (!ether_addr_equal(ctx.comp.lif_getattr.mac, netdev->dev_addr)) {
+		memcpy(addr.sa_data, ctx.comp.lif_getattr.mac, netdev->addr_len);
+		addr.sa_family = AF_INET;
+		err = eth_prepare_mac_addr_change(netdev, &addr);
+		if (err) {
+			netdev_warn(lif->netdev, "ignoring bad MAC addr from NIC %pM - err %d\n",
+				    addr.sa_data, err);
+			return 0;
+		}
+
+		if (!is_zero_ether_addr(netdev->dev_addr)) {
+			netdev_dbg(lif->netdev, "deleting station MAC addr %pM\n",
+				   netdev->dev_addr);
+			ionic_lif_addr(lif, netdev->dev_addr, false);
+		}
+
+		eth_commit_mac_addr_change(netdev, &addr);
 	}
 
-	netdev_dbg(lif->netdev, "deleting station MAC addr %pM\n",
-		   netdev->dev_addr);
-	ionic_lif_addr(lif, netdev->dev_addr, false);
-
-	eth_commit_mac_addr_change(netdev, &addr);
 	netdev_dbg(lif->netdev, "adding station MAC addr %pM\n",
 		   netdev->dev_addr);
 	ionic_lif_addr(lif, netdev->dev_addr, true);
@@ -2421,9 +2429,11 @@ static int ionic_lif_init(struct ionic_lif *lif)
 	if (err)
 		goto err_out_notifyq_deinit;
 
-	err = ionic_rx_filters_init(lif);
-	if (err)
-		goto err_out_notifyq_deinit;
+	if (!test_bit(IONIC_LIF_F_FW_RESET, lif->state)) {
+		err = ionic_rx_filters_init(lif);
+		if (err)
+			goto err_out_notifyq_deinit;
+	}
 
 	err = ionic_station_set(lif);
 	if (err)
diff --git a/drivers/net/ethernet/pensando/ionic/ionic_rx_filter.c b/drivers/net/ethernet/pensando/ionic/ionic_rx_filter.c
index 7a093f1..80eeb76 100644
--- a/drivers/net/ethernet/pensando/ionic/ionic_rx_filter.c
+++ b/drivers/net/ethernet/pensando/ionic/ionic_rx_filter.c
@@ -2,6 +2,7 @@
 /* Copyright(c) 2017 - 2019 Pensando Systems, Inc */
 
 #include <linux/netdevice.h>
+#include <linux/dynamic_debug.h>
 #include <linux/etherdevice.h>
 
 #include "ionic.h"
@@ -17,17 +18,49 @@ void ionic_rx_filter_free(struct ionic_lif *lif, struct ionic_rx_filter *f)
 	devm_kfree(dev, f);
 }
 
-int ionic_rx_filter_del(struct ionic_lif *lif, struct ionic_rx_filter *f)
+void ionic_rx_filter_replay(struct ionic_lif *lif)
 {
-	struct ionic_admin_ctx ctx = {
-		.work = COMPLETION_INITIALIZER_ONSTACK(ctx.work),
-		.cmd.rx_filter_del = {
-			.opcode = IONIC_CMD_RX_FILTER_DEL,
-			.filter_id = cpu_to_le32(f->filter_id),
-		},
-	};
+	struct ionic_rx_filter_add_cmd *ac;
+	struct ionic_admin_ctx ctx;
+	struct ionic_rx_filter *f;
+	struct hlist_head *head;
+	struct hlist_node *tmp;
+	unsigned int i;
+	int err;
 
-	return ionic_adminq_post_wait(lif, &ctx);
+	ac = &ctx.cmd.rx_filter_add;
+
+	for (i = 0; i < IONIC_RX_FILTER_HLISTS; i++) {
+		head = &lif->rx_filters.by_id[i];
+		hlist_for_each_entry_safe(f, tmp, head, by_id) {
+			ctx.work = COMPLETION_INITIALIZER_ONSTACK(ctx.work);
+			memcpy(ac, &f->cmd, sizeof(f->cmd));
+			dev_dbg(&lif->netdev->dev, "replay filter command:\n");
+			dynamic_hex_dump("cmd ", DUMP_PREFIX_OFFSET, 16, 1,
+					 &ctx.cmd, sizeof(ctx.cmd), true);
+
+			err = ionic_adminq_post_wait(lif, &ctx);
+			if (err) {
+				switch (le16_to_cpu(ac->match)) {
+				case IONIC_RX_FILTER_MATCH_VLAN:
+					netdev_info(lif->netdev, "Replay failed - %d: vlan %d\n",
+						    err,
+						    le16_to_cpu(ac->vlan.vlan));
+					break;
+				case IONIC_RX_FILTER_MATCH_MAC:
+					netdev_info(lif->netdev, "Replay failed - %d: mac %pM\n",
+						    err, ac->mac.addr);
+					break;
+				case IONIC_RX_FILTER_MATCH_MAC_VLAN:
+					netdev_info(lif->netdev, "Replay failed - %d: vlan %d mac %pM\n",
+						    err,
+						    le16_to_cpu(ac->vlan.vlan),
+						    ac->mac.addr);
+					break;
+				}
+			}
+		}
+	}
 }
 
 int ionic_rx_filters_init(struct ionic_lif *lif)
diff --git a/drivers/net/ethernet/pensando/ionic/ionic_rx_filter.h b/drivers/net/ethernet/pensando/ionic/ionic_rx_filter.h
index b6aec9c..cf8f4c0 100644
--- a/drivers/net/ethernet/pensando/ionic/ionic_rx_filter.h
+++ b/drivers/net/ethernet/pensando/ionic/ionic_rx_filter.h
@@ -24,7 +24,7 @@ struct ionic_rx_filters {
 };
 
 void ionic_rx_filter_free(struct ionic_lif *lif, struct ionic_rx_filter *f);
-int ionic_rx_filter_del(struct ionic_lif *lif, struct ionic_rx_filter *f);
+void ionic_rx_filter_replay(struct ionic_lif *lif);
 int ionic_rx_filters_init(struct ionic_lif *lif);
 void ionic_rx_filters_deinit(struct ionic_lif *lif);
 int ionic_rx_filter_save(struct ionic_lif *lif, u32 flow_id, u16 rxq_index,
diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.c b/drivers/net/ethernet/qlogic/qed/qed_l2.c
index 1a5fc2a..29810a1 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_l2.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_l2.c
@@ -369,8 +369,8 @@ int qed_sp_eth_vport_start(struct qed_hwfn *p_hwfn,
 	struct qed_spq_entry *p_ent =  NULL;
 	struct qed_sp_init_data init_data;
 	u8 abs_vport_id = 0;
-	int rc = -EINVAL;
 	u16 rx_mode = 0;
+	int rc;
 
 	rc = qed_fw_vport(p_hwfn, p_params->vport_id, &abs_vport_id);
 	if (rc)
diff --git a/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c b/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c
index 1305522..40efe60 100644
--- a/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c
+++ b/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c
@@ -282,7 +282,6 @@ static int rmnet_changelink(struct net_device *dev, struct nlattr *tb[],
 {
 	struct rmnet_priv *priv = netdev_priv(dev);
 	struct net_device *real_dev;
-	struct rmnet_endpoint *ep;
 	struct rmnet_port *port;
 	u16 mux_id;
 
@@ -297,19 +296,27 @@ static int rmnet_changelink(struct net_device *dev, struct nlattr *tb[],
 
 	if (data[IFLA_RMNET_MUX_ID]) {
 		mux_id = nla_get_u16(data[IFLA_RMNET_MUX_ID]);
-		if (rmnet_get_endpoint(port, mux_id)) {
-			NL_SET_ERR_MSG_MOD(extack, "MUX ID already exists");
-			return -EINVAL;
+
+		if (mux_id != priv->mux_id) {
+			struct rmnet_endpoint *ep;
+
+			ep = rmnet_get_endpoint(port, priv->mux_id);
+			if (!ep)
+				return -ENODEV;
+
+			if (rmnet_get_endpoint(port, mux_id)) {
+				NL_SET_ERR_MSG_MOD(extack,
+						   "MUX ID already exists");
+				return -EINVAL;
+			}
+
+			hlist_del_init_rcu(&ep->hlnode);
+			hlist_add_head_rcu(&ep->hlnode,
+					   &port->muxed_ep[mux_id]);
+
+			ep->mux_id = mux_id;
+			priv->mux_id = mux_id;
 		}
-		ep = rmnet_get_endpoint(port, priv->mux_id);
-		if (!ep)
-			return -ENODEV;
-
-		hlist_del_init_rcu(&ep->hlnode);
-		hlist_add_head_rcu(&ep->hlnode, &port->muxed_ep[mux_id]);
-
-		ep->mux_id = mux_id;
-		priv->mux_id = mux_id;
 	}
 
 	if (data[IFLA_RMNET_FLAGS]) {
diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
index 55cb573..bf5bf05 100644
--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c
@@ -5441,9 +5441,8 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	netif_napi_add(dev, &tp->napi, rtl8169_poll, NAPI_POLL_WEIGHT);
 
-	dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO |
-		NETIF_F_RXCSUM | NETIF_F_HW_VLAN_CTAG_TX |
-		NETIF_F_HW_VLAN_CTAG_RX;
+	dev->hw_features = NETIF_F_IP_CSUM | NETIF_F_RXCSUM |
+			   NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX;
 	dev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO |
 		NETIF_F_HIGHDMA;
 	dev->priv_flags |= IFF_LIVE_ADDR_CHANGE;
@@ -5460,26 +5459,26 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		/* Disallow toggling */
 		dev->hw_features &= ~NETIF_F_HW_VLAN_CTAG_RX;
 
+	if (rtl_chip_supports_csum_v2(tp))
+		dev->hw_features |= NETIF_F_IPV6_CSUM;
+
+	dev->features |= dev->hw_features;
+
+	/* There has been a number of reports that using SG/TSO results in
+	 * tx timeouts. However for a lot of people SG/TSO works fine.
+	 * Therefore disable both features by default, but allow users to
+	 * enable them. Use at own risk!
+	 */
 	if (rtl_chip_supports_csum_v2(tp)) {
-		dev->hw_features |= NETIF_F_IPV6_CSUM | NETIF_F_TSO6;
+		dev->hw_features |= NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6;
 		dev->gso_max_size = RTL_GSO_MAX_SIZE_V2;
 		dev->gso_max_segs = RTL_GSO_MAX_SEGS_V2;
 	} else {
+		dev->hw_features |= NETIF_F_SG | NETIF_F_TSO;
 		dev->gso_max_size = RTL_GSO_MAX_SIZE_V1;
 		dev->gso_max_segs = RTL_GSO_MAX_SEGS_V1;
 	}
 
-	/* RTL8168e-vl and one RTL8168c variant are known to have a
-	 * HW issue with TSO.
-	 */
-	if (tp->mac_version == RTL_GIGA_MAC_VER_34 ||
-	    tp->mac_version == RTL_GIGA_MAC_VER_22) {
-		dev->vlan_features &= ~(NETIF_F_ALL_TSO | NETIF_F_SG);
-		dev->hw_features &= ~(NETIF_F_ALL_TSO | NETIF_F_SG);
-	}
-
-	dev->features |= dev->hw_features;
-
 	dev->hw_features |= NETIF_F_RXALL;
 	dev->hw_features |= NETIF_F_RXFCS;
 
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
index e0212d2..fa32cd5 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
@@ -241,6 +241,8 @@ static int socfpga_set_phy_mode_common(int phymode, u32 *val)
 	switch (phymode) {
 	case PHY_INTERFACE_MODE_RGMII:
 	case PHY_INTERFACE_MODE_RGMII_ID:
+	case PHY_INTERFACE_MODE_RGMII_RXID:
+	case PHY_INTERFACE_MODE_RGMII_TXID:
 		*val = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII;
 		break;
 	case PHY_INTERFACE_MODE_MII:
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
index 7d40760..0e1ca2c 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
@@ -150,6 +150,8 @@ static int sun7i_gmac_probe(struct platform_device *pdev)
 	plat_dat->init = sun7i_gmac_init;
 	plat_dat->exit = sun7i_gmac_exit;
 	plat_dat->fix_mac_speed = sun7i_fix_speed;
+	plat_dat->tx_fifo_size = 4096;
+	plat_dat->rx_fifo_size = 16384;
 
 	ret = sun7i_gmac_init(pdev, plat_dat->bsp_priv);
 	if (ret)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
index 5427843..efc6ec1 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
@@ -207,7 +207,7 @@ static void dwmac1000_set_filter(struct mac_device_info *hw,
 			reg++;
 		}
 
-		while (reg <= perfect_addr_number) {
+		while (reg < perfect_addr_number) {
 			writel(0, ioaddr + GMAC_ADDR_HIGH(reg));
 			writel(0, ioaddr + GMAC_ADDR_LOW(reg));
 			reg++;
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
index 0e4575f..ad4df9b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
@@ -577,8 +577,13 @@ static void dwxgmac2_update_vlan_hash(struct mac_device_info *hw, u32 hash,
 			value |= XGMAC_VLAN_EDVLP;
 			value |= XGMAC_VLAN_ESVL;
 			value |= XGMAC_VLAN_DOVLTC;
+		} else {
+			value &= ~XGMAC_VLAN_EDVLP;
+			value &= ~XGMAC_VLAN_ESVL;
+			value &= ~XGMAC_VLAN_DOVLTC;
 		}
 
+		value &= ~XGMAC_VLAN_VID;
 		writel(value, ioaddr + XGMAC_VLAN_TAG);
 	} else if (perfect_match) {
 		u32 value = readl(ioaddr + XGMAC_PACKET_FILTER);
@@ -589,13 +594,19 @@ static void dwxgmac2_update_vlan_hash(struct mac_device_info *hw, u32 hash,
 
 		value = readl(ioaddr + XGMAC_VLAN_TAG);
 
+		value &= ~XGMAC_VLAN_VTHM;
 		value |= XGMAC_VLAN_ETV;
 		if (is_double) {
 			value |= XGMAC_VLAN_EDVLP;
 			value |= XGMAC_VLAN_ESVL;
 			value |= XGMAC_VLAN_DOVLTC;
+		} else {
+			value &= ~XGMAC_VLAN_EDVLP;
+			value &= ~XGMAC_VLAN_ESVL;
+			value &= ~XGMAC_VLAN_DOVLTC;
 		}
 
+		value &= ~XGMAC_VLAN_VID;
 		writel(value | perfect_match, ioaddr + XGMAC_VLAN_TAG);
 	} else {
 		u32 value = readl(ioaddr + XGMAC_PACKET_FILTER);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 2fb671e..e6898fd 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -4566,9 +4566,13 @@ static int stmmac_vlan_rx_add_vid(struct net_device *ndev, __be16 proto, u16 vid
 		return ret;
 	}
 
-	ret = stmmac_add_hw_vlan_rx_fltr(priv, ndev, priv->hw, proto, vid);
+	if (priv->hw->num_vlan) {
+		ret = stmmac_add_hw_vlan_rx_fltr(priv, ndev, priv->hw, proto, vid);
+		if (ret)
+			return ret;
+	}
 
-	return ret;
+	return 0;
 }
 
 static int stmmac_vlan_rx_kill_vid(struct net_device *ndev, __be16 proto, u16 vid)
@@ -4581,9 +4585,12 @@ static int stmmac_vlan_rx_kill_vid(struct net_device *ndev, __be16 proto, u16 vi
 		is_double = true;
 
 	clear_bit(vid, priv->active_vlans);
-	ret = stmmac_del_hw_vlan_rx_fltr(priv, ndev, priv->hw, proto, vid);
-	if (ret)
-		return ret;
+
+	if (priv->hw->num_vlan) {
+		ret = stmmac_del_hw_vlan_rx_fltr(priv, ndev, priv->hw, proto, vid);
+		if (ret)
+			return ret;
+	}
 
 	return stmmac_vlan_update(priv, is_double);
 }
diff --git a/drivers/net/ethernet/ti/am65-cpsw-nuss.c b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
index f71c15c..2bf5673 100644
--- a/drivers/net/ethernet/ti/am65-cpsw-nuss.c
+++ b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
@@ -1372,7 +1372,7 @@ static int am65_cpsw_nuss_init_tx_chns(struct am65_cpsw_common *common)
 err:
 	i = devm_add_action(dev, am65_cpsw_nuss_free_tx_chns, common);
 	if (i) {
-		dev_err(dev, "failed to add free_tx_chns action %d", i);
+		dev_err(dev, "Failed to add free_tx_chns action %d\n", i);
 		return i;
 	}
 
@@ -1481,7 +1481,7 @@ static int am65_cpsw_nuss_init_rx_chns(struct am65_cpsw_common *common)
 err:
 	i = devm_add_action(dev, am65_cpsw_nuss_free_rx_chns, common);
 	if (i) {
-		dev_err(dev, "failed to add free_rx_chns action %d", i);
+		dev_err(dev, "Failed to add free_rx_chns action %d\n", i);
 		return i;
 	}
 
@@ -1691,7 +1691,7 @@ static int am65_cpsw_nuss_init_ndev_2g(struct am65_cpsw_common *common)
 	ret = devm_add_action_or_reset(dev, am65_cpsw_pcpu_stats_free,
 				       ndev_priv->stats);
 	if (ret) {
-		dev_err(dev, "failed to add percpu stat free action %d", ret);
+		dev_err(dev, "Failed to add percpu stat free action %d\n", ret);
 		return ret;
 	}
 
diff --git a/drivers/net/ipa/ipa_modem.c b/drivers/net/ipa/ipa_modem.c
index 55c9329..ed10818 100644
--- a/drivers/net/ipa/ipa_modem.c
+++ b/drivers/net/ipa/ipa_modem.c
@@ -297,14 +297,13 @@ static void ipa_modem_crashed(struct ipa *ipa)
 
 	ret = ipa_endpoint_modem_exception_reset_all(ipa);
 	if (ret)
-		dev_err(dev, "error %d resetting exception endpoint",
-			ret);
+		dev_err(dev, "error %d resetting exception endpoint\n", ret);
 
 	ipa_endpoint_modem_pause_all(ipa, false);
 
 	ret = ipa_modem_stop(ipa);
 	if (ret)
-		dev_err(dev, "error %d stopping modem", ret);
+		dev_err(dev, "error %d stopping modem\n", ret);
 
 	/* Now prepare for the next modem boot */
 	ret = ipa_mem_zero_modem(ipa);
diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c
index da82d7f..a183250 100644
--- a/drivers/net/macsec.c
+++ b/drivers/net/macsec.c
@@ -2594,6 +2594,9 @@ static int macsec_upd_offload(struct sk_buff *skb, struct genl_info *info)
 		return PTR_ERR(dev);
 	macsec = macsec_priv(dev);
 
+	if (!tb_offload[MACSEC_OFFLOAD_ATTR_TYPE])
+		return -EINVAL;
+
 	offload = nla_get_u8(tb_offload[MACSEC_OFFLOAD_ATTR_TYPE]);
 	if (macsec->offload == offload)
 		return 0;
@@ -3806,7 +3809,7 @@ static int macsec_changelink(struct net_device *dev, struct nlattr *tb[],
 			     struct netlink_ext_ack *extack)
 {
 	struct macsec_dev *macsec = macsec_priv(dev);
-	struct macsec_tx_sa tx_sc;
+	struct macsec_tx_sc tx_sc;
 	struct macsec_secy secy;
 	int ret;
 
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 481cf48..31f731e 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -425,8 +425,8 @@ static int at803x_parse_dt(struct phy_device *phydev)
 		 */
 		if (at803x_match_phy_id(phydev, ATH8030_PHY_ID) ||
 		    at803x_match_phy_id(phydev, ATH8035_PHY_ID)) {
-			priv->clk_25m_reg &= ~AT8035_CLK_OUT_MASK;
-			priv->clk_25m_mask &= ~AT8035_CLK_OUT_MASK;
+			priv->clk_25m_reg &= AT8035_CLK_OUT_MASK;
+			priv->clk_25m_mask &= AT8035_CLK_OUT_MASK;
 		}
 	}
 
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 4714ca0..7fc8e10 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -1263,6 +1263,30 @@ static int marvell_read_status_page_an(struct phy_device *phydev,
 	int lpa;
 	int err;
 
+	if (!(status & MII_M1011_PHY_STATUS_RESOLVED)) {
+		phydev->link = 0;
+		return 0;
+	}
+
+	if (status & MII_M1011_PHY_STATUS_FULLDUPLEX)
+		phydev->duplex = DUPLEX_FULL;
+	else
+		phydev->duplex = DUPLEX_HALF;
+
+	switch (status & MII_M1011_PHY_STATUS_SPD_MASK) {
+	case MII_M1011_PHY_STATUS_1000:
+		phydev->speed = SPEED_1000;
+		break;
+
+	case MII_M1011_PHY_STATUS_100:
+		phydev->speed = SPEED_100;
+		break;
+
+	default:
+		phydev->speed = SPEED_10;
+		break;
+	}
+
 	if (!fiber) {
 		err = genphy_read_lpa(phydev);
 		if (err < 0)
@@ -1291,28 +1315,6 @@ static int marvell_read_status_page_an(struct phy_device *phydev,
 		}
 	}
 
-	if (!(status & MII_M1011_PHY_STATUS_RESOLVED))
-		return 0;
-
-	if (status & MII_M1011_PHY_STATUS_FULLDUPLEX)
-		phydev->duplex = DUPLEX_FULL;
-	else
-		phydev->duplex = DUPLEX_HALF;
-
-	switch (status & MII_M1011_PHY_STATUS_SPD_MASK) {
-	case MII_M1011_PHY_STATUS_1000:
-		phydev->speed = SPEED_1000;
-		break;
-
-	case MII_M1011_PHY_STATUS_100:
-		phydev->speed = SPEED_100;
-		break;
-
-	default:
-		phydev->speed = SPEED_10;
-		break;
-	}
-
 	return 0;
 }
 
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index 7621bad..95e3f46 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -33,6 +33,8 @@
 #define MV_PHY_ALASKA_NBT_QUIRK_REV	(MARVELL_PHY_ID_88X3310 | 0xa)
 
 enum {
+	MV_PMA_FW_VER0		= 0xc011,
+	MV_PMA_FW_VER1		= 0xc012,
 	MV_PMA_BOOT		= 0xc050,
 	MV_PMA_BOOT_FATAL	= BIT(0),
 
@@ -73,7 +75,8 @@ enum {
 
 	/* Vendor2 MMD registers */
 	MV_V2_PORT_CTRL		= 0xf001,
-	MV_V2_PORT_CTRL_PWRDOWN = 0x0800,
+	MV_V2_PORT_CTRL_SWRST	= BIT(15),
+	MV_V2_PORT_CTRL_PWRDOWN = BIT(11),
 	MV_V2_TEMP_CTRL		= 0xf08a,
 	MV_V2_TEMP_CTRL_MASK	= 0xc000,
 	MV_V2_TEMP_CTRL_SAMPLE	= 0x0000,
@@ -83,6 +86,8 @@ enum {
 };
 
 struct mv3310_priv {
+	u32 firmware_ver;
+
 	struct device *hwmon_dev;
 	char *hwmon_name;
 };
@@ -235,8 +240,17 @@ static int mv3310_power_down(struct phy_device *phydev)
 
 static int mv3310_power_up(struct phy_device *phydev)
 {
-	return phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2, MV_V2_PORT_CTRL,
-				  MV_V2_PORT_CTRL_PWRDOWN);
+	struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
+	int ret;
+
+	ret = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2, MV_V2_PORT_CTRL,
+				 MV_V2_PORT_CTRL_PWRDOWN);
+
+	if (priv->firmware_ver < 0x00030000)
+		return ret;
+
+	return phy_set_bits_mmd(phydev, MDIO_MMD_VEND2, MV_V2_PORT_CTRL,
+				MV_V2_PORT_CTRL_SWRST);
 }
 
 static int mv3310_reset(struct phy_device *phydev, u32 unit)
@@ -355,6 +369,22 @@ static int mv3310_probe(struct phy_device *phydev)
 
 	dev_set_drvdata(&phydev->mdio.dev, priv);
 
+	ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MV_PMA_FW_VER0);
+	if (ret < 0)
+		return ret;
+
+	priv->firmware_ver = ret << 16;
+
+	ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MV_PMA_FW_VER1);
+	if (ret < 0)
+		return ret;
+
+	priv->firmware_ver |= ret;
+
+	phydev_info(phydev, "Firmware version %u.%u.%u.%u\n",
+		    priv->firmware_ver >> 24, (priv->firmware_ver >> 16) & 255,
+		    (priv->firmware_ver >> 8) & 255, priv->firmware_ver & 255);
+
 	/* Powering down the port when not in use saves about 600mW */
 	ret = mv3310_power_down(phydev);
 	if (ret)
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 522760c..7a4eb3f 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -464,7 +464,7 @@ static struct class mdio_bus_class = {
 
 /**
  * mdio_find_bus - Given the name of a mdiobus, find the mii_bus.
- * @mdio_bus_np: Pointer to the mii_bus.
+ * @mdio_name: The name of a mdiobus.
  *
  * Returns a reference to the mii_bus, or NULL if none found.  The
  * embedded struct device will have its reference count incremented,
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 2ec19e5..3a4d83fa 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -25,6 +25,7 @@
 #include <linux/micrel_phy.h>
 #include <linux/of.h>
 #include <linux/clk.h>
+#include <linux/delay.h>
 
 /* Operation Mode Strap Override */
 #define MII_KSZPHY_OMSO				0x16
@@ -952,6 +953,12 @@ static int kszphy_resume(struct phy_device *phydev)
 
 	genphy_resume(phydev);
 
+	/* After switching from power-down to normal mode, an internal global
+	 * reset is automatically generated. Wait a minimum of 1 ms before
+	 * read/write access to the PHY registers.
+	 */
+	usleep_range(1000, 2000);
+
 	ret = kszphy_config_reset(phydev);
 	if (ret)
 		return ret;
@@ -1197,7 +1204,7 @@ static struct phy_driver ksphy_driver[] = {
 	.driver_data	= &ksz9021_type,
 	.probe		= kszphy_probe,
 	.config_init	= ksz9131_config_init,
-	.read_status	= ksz9031_read_status,
+	.read_status	= genphy_read_status,
 	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= kszphy_config_intr,
 	.get_sset_count = kszphy_get_sset_count,
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 228fe44..44889eb 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -1678,8 +1678,12 @@ static struct sk_buff *tun_build_skb(struct tun_struct *tun,
 			alloc_frag->offset += buflen;
 		}
 		err = tun_xdp_act(tun, xdp_prog, &xdp, act);
-		if (err < 0)
-			goto err_xdp;
+		if (err < 0) {
+			if (act == XDP_REDIRECT || act == XDP_TX)
+				put_page(alloc_frag->page);
+			goto out;
+		}
+
 		if (err == XDP_REDIRECT)
 			xdp_do_flush();
 		if (err != XDP_PASS)
@@ -1693,8 +1697,6 @@ static struct sk_buff *tun_build_skb(struct tun_struct *tun,
 
 	return __tun_build_skb(tfile, alloc_frag, buf, buflen, len, pad);
 
-err_xdp:
-	put_page(alloc_frag->page);
 out:
 	rcu_read_unlock();
 	local_bh_enable();
@@ -1886,6 +1888,7 @@ static ssize_t tun_get_user(struct tun_struct *tun, struct tun_file *tfile,
 
 	skb_reset_network_header(skb);
 	skb_probe_transport_header(skb);
+	skb_record_rx_queue(skb, tfile->queue_index);
 
 	if (skb_xdp) {
 		struct bpf_prog *xdp_prog;
@@ -2457,6 +2460,7 @@ static int tun_xdp_one(struct tun_struct *tun,
 	skb->protocol = eth_type_trans(skb, tun->dev);
 	skb_reset_network_header(skb);
 	skb_probe_transport_header(skb);
+	skb_record_rx_queue(skb, tfile->queue_index);
 
 	if (skb_xdp) {
 		err = do_xdp_generic(xdp_prog, skb);
@@ -2468,7 +2472,6 @@ static int tun_xdp_one(struct tun_struct *tun,
 	    !tfile->detached)
 		rxhash = __skb_get_hash_symmetric(skb);
 
-	skb_record_rx_queue(skb, tfile->queue_index);
 	netif_receive_skb(skb);
 
 	/* No need for get_cpu_ptr() here since this function is
diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c
index 8783e2a..0ef7e1f 100644
--- a/drivers/net/usb/pegasus.c
+++ b/drivers/net/usb/pegasus.c
@@ -54,6 +54,7 @@ static const char driver_name[] = "pegasus";
 #undef	PEGASUS_WRITE_EEPROM
 #define	BMSR_MEDIA	(BMSR_10HALF | BMSR_10FULL | BMSR_100HALF | \
 			BMSR_100FULL | BMSR_ANEGCAPABLE)
+#define CARRIER_CHECK_DELAY (2 * HZ)
 
 static bool loopback;
 static bool mii_mode;
@@ -1089,17 +1090,12 @@ static inline void setup_pegasus_II(pegasus_t *pegasus)
 		set_register(pegasus, Reg81, 2);
 }
 
-
-static int pegasus_count;
-static struct workqueue_struct *pegasus_workqueue;
-#define CARRIER_CHECK_DELAY (2 * HZ)
-
 static void check_carrier(struct work_struct *work)
 {
 	pegasus_t *pegasus = container_of(work, pegasus_t, carrier_check.work);
 	set_carrier(pegasus->net);
 	if (!(pegasus->flags & PEGASUS_UNPLUG)) {
-		queue_delayed_work(pegasus_workqueue, &pegasus->carrier_check,
+		queue_delayed_work(system_long_wq, &pegasus->carrier_check,
 			CARRIER_CHECK_DELAY);
 	}
 }
@@ -1120,18 +1116,6 @@ static int pegasus_blacklisted(struct usb_device *udev)
 	return 0;
 }
 
-/* we rely on probe() and remove() being serialized so we
- * don't need extra locking on pegasus_count.
- */
-static void pegasus_dec_workqueue(void)
-{
-	pegasus_count--;
-	if (pegasus_count == 0) {
-		destroy_workqueue(pegasus_workqueue);
-		pegasus_workqueue = NULL;
-	}
-}
-
 static int pegasus_probe(struct usb_interface *intf,
 			 const struct usb_device_id *id)
 {
@@ -1144,14 +1128,6 @@ static int pegasus_probe(struct usb_interface *intf,
 	if (pegasus_blacklisted(dev))
 		return -ENODEV;
 
-	if (pegasus_count == 0) {
-		pegasus_workqueue = alloc_workqueue("pegasus", WQ_MEM_RECLAIM,
-						    0);
-		if (!pegasus_workqueue)
-			return -ENOMEM;
-	}
-	pegasus_count++;
-
 	net = alloc_etherdev(sizeof(struct pegasus));
 	if (!net)
 		goto out;
@@ -1209,7 +1185,7 @@ static int pegasus_probe(struct usb_interface *intf,
 	res = register_netdev(net);
 	if (res)
 		goto out3;
-	queue_delayed_work(pegasus_workqueue, &pegasus->carrier_check,
+	queue_delayed_work(system_long_wq, &pegasus->carrier_check,
 			   CARRIER_CHECK_DELAY);
 	dev_info(&intf->dev, "%s, %s, %pM\n", net->name,
 		 usb_dev_id[dev_index].name, net->dev_addr);
@@ -1222,7 +1198,6 @@ static int pegasus_probe(struct usb_interface *intf,
 out1:
 	free_netdev(net);
 out:
-	pegasus_dec_workqueue();
 	return res;
 }
 
@@ -1237,7 +1212,7 @@ static void pegasus_disconnect(struct usb_interface *intf)
 	}
 
 	pegasus->flags |= PEGASUS_UNPLUG;
-	cancel_delayed_work(&pegasus->carrier_check);
+	cancel_delayed_work_sync(&pegasus->carrier_check);
 	unregister_netdev(pegasus->net);
 	unlink_all_urbs(pegasus);
 	free_all_urbs(pegasus);
@@ -1246,7 +1221,6 @@ static void pegasus_disconnect(struct usb_interface *intf)
 		pegasus->rx_skb = NULL;
 	}
 	free_netdev(pegasus->net);
-	pegasus_dec_workqueue();
 }
 
 static int pegasus_suspend(struct usb_interface *intf, pm_message_t message)
@@ -1254,7 +1228,7 @@ static int pegasus_suspend(struct usb_interface *intf, pm_message_t message)
 	struct pegasus *pegasus = usb_get_intfdata(intf);
 
 	netif_device_detach(pegasus->net);
-	cancel_delayed_work(&pegasus->carrier_check);
+	cancel_delayed_work_sync(&pegasus->carrier_check);
 	if (netif_running(pegasus->net)) {
 		usb_kill_urb(pegasus->rx_urb);
 		usb_kill_urb(pegasus->intr_urb);
@@ -1276,7 +1250,7 @@ static int pegasus_resume(struct usb_interface *intf)
 		pegasus->intr_urb->actual_length = 0;
 		intr_callback(pegasus->intr_urb);
 	}
-	queue_delayed_work(pegasus_workqueue, &pegasus->carrier_check,
+	queue_delayed_work(system_long_wq, &pegasus->carrier_check,
 				CARRIER_CHECK_DELAY);
 	return 0;
 }
diff --git a/drivers/net/wan/.gitignore b/drivers/net/wan/.gitignore
index dae3ea6..247bfbf 100644
--- a/drivers/net/wan/.gitignore
+++ b/drivers/net/wan/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 wanxlfw.inc
diff --git a/drivers/net/wimax/i2400m/driver.c b/drivers/net/wimax/i2400m/driver.c
index f66c0f8..ecb3fcc 100644
--- a/drivers/net/wimax/i2400m/driver.c
+++ b/drivers/net/wimax/i2400m/driver.c
@@ -740,9 +740,6 @@ EXPORT_SYMBOL_GPL(i2400m_error_recovery);
 static
 int i2400m_bm_buf_alloc(struct i2400m *i2400m)
 {
-	int result;
-
-	result = -ENOMEM;
 	i2400m->bm_cmd_buf = kzalloc(I2400M_BM_CMD_BUF_SIZE, GFP_KERNEL);
 	if (i2400m->bm_cmd_buf == NULL)
 		goto error_bm_cmd_kzalloc;
@@ -754,7 +751,7 @@ int i2400m_bm_buf_alloc(struct i2400m *i2400m)
 error_bm_ack_buf_kzalloc:
 	kfree(i2400m->bm_cmd_buf);
 error_bm_cmd_kzalloc:
-	return result;
+	return -ENOMEM;
 }
 
 
@@ -843,7 +840,7 @@ EXPORT_SYMBOL_GPL(i2400m_reset);
  */
 int i2400m_setup(struct i2400m *i2400m, enum i2400m_bri bm_flags)
 {
-	int result = -ENODEV;
+	int result;
 	struct device *dev = i2400m_dev(i2400m);
 	struct wimax_dev *wimax_dev = &i2400m->wimax_dev;
 	struct net_device *net_dev = i2400m->wimax_dev.net_dev;
diff --git a/drivers/net/wireless/ath/ath11k/thermal.h b/drivers/net/wireless/ath/ath11k/thermal.h
index 459b8d4..f9af55f 100644
--- a/drivers/net/wireless/ath/ath11k/thermal.h
+++ b/drivers/net/wireless/ath/ath11k/thermal.h
@@ -36,12 +36,13 @@ static inline int ath11k_thermal_register(struct ath11k_base *sc)
 	return 0;
 }
 
-static inline void ath11k_thermal_unregister(struct ath11k *ar)
+static inline void ath11k_thermal_unregister(struct ath11k_base *sc)
 {
 }
 
 static inline int ath11k_thermal_set_throttling(struct ath11k *ar, u32 throttle_state)
 {
+	return 0;
 }
 
 static inline void ath11k_thermal_event_temperature(struct ath11k *ar,
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
index 23627c9..436f501 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
@@ -729,9 +729,18 @@ static int brcmf_net_mon_stop(struct net_device *ndev)
 	return err;
 }
 
+static netdev_tx_t brcmf_net_mon_start_xmit(struct sk_buff *skb,
+					    struct net_device *ndev)
+{
+	dev_kfree_skb_any(skb);
+
+	return NETDEV_TX_OK;
+}
+
 static const struct net_device_ops brcmf_netdev_ops_mon = {
 	.ndo_open = brcmf_net_mon_open,
 	.ndo_stop = brcmf_net_mon_stop,
+	.ndo_start_xmit = brcmf_net_mon_start_xmit,
 };
 
 int brcmf_net_mon_attach(struct brcmf_if *ifp)
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 7fe8207..7c4b7c3 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -3669,9 +3669,9 @@ static int hwsim_new_radio_nl(struct sk_buff *msg, struct genl_info *info)
 	}
 
 	if (info->attrs[HWSIM_ATTR_RADIO_NAME]) {
-		hwname = kasprintf(GFP_KERNEL, "%.*s",
-				   nla_len(info->attrs[HWSIM_ATTR_RADIO_NAME]),
-				   (char *)nla_data(info->attrs[HWSIM_ATTR_RADIO_NAME]));
+		hwname = kstrndup((char *)nla_data(info->attrs[HWSIM_ATTR_RADIO_NAME]),
+				  nla_len(info->attrs[HWSIM_ATTR_RADIO_NAME]),
+				  GFP_KERNEL);
 		if (!hwname)
 			return -ENOMEM;
 		param.hwname = hwname;
@@ -3691,9 +3691,9 @@ static int hwsim_del_radio_nl(struct sk_buff *msg, struct genl_info *info)
 	if (info->attrs[HWSIM_ATTR_RADIO_ID]) {
 		idx = nla_get_u32(info->attrs[HWSIM_ATTR_RADIO_ID]);
 	} else if (info->attrs[HWSIM_ATTR_RADIO_NAME]) {
-		hwname = kasprintf(GFP_KERNEL, "%.*s",
-				   nla_len(info->attrs[HWSIM_ATTR_RADIO_NAME]),
-				   (char *)nla_data(info->attrs[HWSIM_ATTR_RADIO_NAME]));
+		hwname = kstrndup((char *)nla_data(info->attrs[HWSIM_ATTR_RADIO_NAME]),
+				  nla_len(info->attrs[HWSIM_ATTR_RADIO_NAME]),
+				  GFP_KERNEL);
 		if (!hwname)
 			return -ENOMEM;
 	} else
diff --git a/drivers/net/wireless/realtek/rtw88/pci.c b/drivers/net/wireless/realtek/rtw88/pci.c
index e37c714..1af87eb 100644
--- a/drivers/net/wireless/realtek/rtw88/pci.c
+++ b/drivers/net/wireless/realtek/rtw88/pci.c
@@ -1338,22 +1338,17 @@ static void rtw_pci_phy_cfg(struct rtw_dev *rtwdev)
 	rtw_pci_link_cfg(rtwdev);
 }
 
-#ifdef CONFIG_PM
-static int rtw_pci_suspend(struct device *dev)
+static int __maybe_unused rtw_pci_suspend(struct device *dev)
 {
 	return 0;
 }
 
-static int rtw_pci_resume(struct device *dev)
+static int __maybe_unused rtw_pci_resume(struct device *dev)
 {
 	return 0;
 }
 
 static SIMPLE_DEV_PM_OPS(rtw_pm_ops, rtw_pci_suspend, rtw_pci_resume);
-#define RTW_PM_OPS (&rtw_pm_ops)
-#else
-#define RTW_PM_OPS NULL
-#endif
 
 static int rtw_pci_claim(struct rtw_dev *rtwdev, struct pci_dev *pdev)
 {
@@ -1582,7 +1577,7 @@ static struct pci_driver rtw_pci_driver = {
 	.id_table = rtw_pci_id_table,
 	.probe = rtw_pci_probe,
 	.remove = rtw_pci_remove,
-	.driver.pm = RTW_PM_OPS,
+	.driver.pm = &rtw_pm_ops,
 };
 module_pci_driver(rtw_pci_driver);
 
diff --git a/drivers/ntb/hw/idt/ntb_hw_idt.c b/drivers/ntb/hw/idt/ntb_hw_idt.c
index dcf2346..edae523 100644
--- a/drivers/ntb/hw/idt/ntb_hw_idt.c
+++ b/drivers/ntb/hw/idt/ntb_hw_idt.c
@@ -2674,8 +2674,8 @@ static int idt_init_pci(struct idt_ntb_dev *ndev)
 	ret = pci_enable_pcie_error_reporting(pdev);
 	if (ret != 0)
 		dev_warn(&pdev->dev, "PCIe AER capability disabled\n");
-	else /* Cleanup uncorrectable error status before getting to init */
-		pci_cleanup_aer_uncorrect_error_status(pdev);
+	else /* Cleanup nonfatal error status before getting to init */
+		pci_aer_clear_nonfatal_status(pdev);
 
 	/* First enable the PCI device */
 	ret = pcim_enable_device(pdev);
diff --git a/drivers/nvdimm/bus.c b/drivers/nvdimm/bus.c
index a8b5159..09087c3 100644
--- a/drivers/nvdimm/bus.c
+++ b/drivers/nvdimm/bus.c
@@ -1042,8 +1042,10 @@ static int __nd_ioctl(struct nvdimm_bus *nvdimm_bus, struct nvdimm *nvdimm,
 			return -EFAULT;
 	}
 
-	if (!desc || (desc->out_num + desc->in_num == 0) ||
-			!test_bit(cmd, &cmd_mask))
+	if (!desc ||
+	    (desc->out_num + desc->in_num == 0) ||
+	    cmd > ND_CMD_CALL ||
+	    !test_bit(cmd, &cmd_mask))
 		return -ENOTTY;
 
 	/* fail write commands (when read-only) */
diff --git a/drivers/nvdimm/dimm.c b/drivers/nvdimm/dimm.c
index 64776ed..7d4ddc4 100644
--- a/drivers/nvdimm/dimm.c
+++ b/drivers/nvdimm/dimm.c
@@ -99,7 +99,7 @@ static int nvdimm_probe(struct device *dev)
 	if (ndd->ns_current >= 0) {
 		rc = nd_label_reserve_dpa(ndd);
 		if (rc == 0)
-			nvdimm_set_aliasing(dev);
+			nvdimm_set_labeling(dev);
 	}
 	nvdimm_bus_unlock(dev);
 
diff --git a/drivers/nvdimm/dimm_devs.c b/drivers/nvdimm/dimm_devs.c
index 94ea6db..b7b77e8 100644
--- a/drivers/nvdimm/dimm_devs.c
+++ b/drivers/nvdimm/dimm_devs.c
@@ -32,7 +32,7 @@ int nvdimm_check_config_data(struct device *dev)
 
 	if (!nvdimm->cmd_mask ||
 	    !test_bit(ND_CMD_GET_CONFIG_DATA, &nvdimm->cmd_mask)) {
-		if (test_bit(NDD_ALIASING, &nvdimm->flags))
+		if (test_bit(NDD_LABELING, &nvdimm->flags))
 			return -ENXIO;
 		else
 			return -ENOTTY;
@@ -173,11 +173,11 @@ int nvdimm_set_config_data(struct nvdimm_drvdata *ndd, size_t offset,
 	return rc;
 }
 
-void nvdimm_set_aliasing(struct device *dev)
+void nvdimm_set_labeling(struct device *dev)
 {
 	struct nvdimm *nvdimm = to_nvdimm(dev);
 
-	set_bit(NDD_ALIASING, &nvdimm->flags);
+	set_bit(NDD_LABELING, &nvdimm->flags);
 }
 
 void nvdimm_set_locked(struct device *dev)
@@ -312,8 +312,9 @@ static ssize_t flags_show(struct device *dev,
 {
 	struct nvdimm *nvdimm = to_nvdimm(dev);
 
-	return sprintf(buf, "%s%s\n",
+	return sprintf(buf, "%s%s%s\n",
 			test_bit(NDD_ALIASING, &nvdimm->flags) ? "alias " : "",
+			test_bit(NDD_LABELING, &nvdimm->flags) ? "label " : "",
 			test_bit(NDD_LOCKED, &nvdimm->flags) ? "lock " : "");
 }
 static DEVICE_ATTR_RO(flags);
@@ -562,6 +563,21 @@ int nvdimm_security_freeze(struct nvdimm *nvdimm)
 	return rc;
 }
 
+static unsigned long dpa_align(struct nd_region *nd_region)
+{
+	struct device *dev = &nd_region->dev;
+
+	if (dev_WARN_ONCE(dev, !is_nvdimm_bus_locked(dev),
+				"bus lock required for capacity provision\n"))
+		return 0;
+	if (dev_WARN_ONCE(dev, !nd_region->ndr_mappings || nd_region->align
+				% nd_region->ndr_mappings,
+				"invalid region align %#lx mappings: %d\n",
+				nd_region->align, nd_region->ndr_mappings))
+		return 0;
+	return nd_region->align / nd_region->ndr_mappings;
+}
+
 int alias_dpa_busy(struct device *dev, void *data)
 {
 	resource_size_t map_end, blk_start, new;
@@ -570,6 +586,7 @@ int alias_dpa_busy(struct device *dev, void *data)
 	struct nd_region *nd_region;
 	struct nvdimm_drvdata *ndd;
 	struct resource *res;
+	unsigned long align;
 	int i;
 
 	if (!is_memory(dev))
@@ -607,13 +624,21 @@ int alias_dpa_busy(struct device *dev, void *data)
 	 * Find the free dpa from the end of the last pmem allocation to
 	 * the end of the interleave-set mapping.
 	 */
+	align = dpa_align(nd_region);
+	if (!align)
+		return 0;
+
 	for_each_dpa_resource(ndd, res) {
+		resource_size_t start, end;
+
 		if (strncmp(res->name, "pmem", 4) != 0)
 			continue;
-		if ((res->start >= blk_start && res->start < map_end)
-				|| (res->end >= blk_start
-					&& res->end <= map_end)) {
-			new = max(blk_start, min(map_end + 1, res->end + 1));
+
+		start = ALIGN_DOWN(res->start, align);
+		end = ALIGN(res->end + 1, align) - 1;
+		if ((start >= blk_start && start < map_end)
+				|| (end >= blk_start && end <= map_end)) {
+			new = max(blk_start, min(map_end, end) + 1);
 			if (new != blk_start) {
 				blk_start = new;
 				goto retry;
@@ -653,6 +678,7 @@ resource_size_t nd_blk_available_dpa(struct nd_region *nd_region)
 		.res = NULL,
 	};
 	struct resource *res;
+	unsigned long align;
 
 	if (!ndd)
 		return 0;
@@ -660,10 +686,20 @@ resource_size_t nd_blk_available_dpa(struct nd_region *nd_region)
 	device_for_each_child(&nvdimm_bus->dev, &info, alias_dpa_busy);
 
 	/* now account for busy blk allocations in unaliased dpa */
+	align = dpa_align(nd_region);
+	if (!align)
+		return 0;
 	for_each_dpa_resource(ndd, res) {
+		resource_size_t start, end, size;
+
 		if (strncmp(res->name, "blk", 3) != 0)
 			continue;
-		info.available -= resource_size(res);
+		start = ALIGN_DOWN(res->start, align);
+		end = ALIGN(res->end + 1, align) - 1;
+		size = end - start + 1;
+		if (size >= info.available)
+			return 0;
+		info.available -= size;
 	}
 
 	return info.available;
@@ -682,19 +718,31 @@ resource_size_t nd_pmem_max_contiguous_dpa(struct nd_region *nd_region,
 	struct nvdimm_bus *nvdimm_bus;
 	resource_size_t max = 0;
 	struct resource *res;
+	unsigned long align;
 
 	/* if a dimm is disabled the available capacity is zero */
 	if (!ndd)
 		return 0;
 
+	align = dpa_align(nd_region);
+	if (!align)
+		return 0;
+
 	nvdimm_bus = walk_to_nvdimm_bus(ndd->dev);
 	if (__reserve_free_pmem(&nd_region->dev, nd_mapping->nvdimm))
 		return 0;
 	for_each_dpa_resource(ndd, res) {
+		resource_size_t start, end;
+
 		if (strcmp(res->name, "pmem-reserve") != 0)
 			continue;
-		if (resource_size(res) > max)
-			max = resource_size(res);
+		/* trim free space relative to current alignment setting */
+		start = ALIGN(res->start, align);
+		end = ALIGN_DOWN(res->end + 1, align) - 1;
+		if (end < start)
+			continue;
+		if (end - start + 1 > max)
+			max = end - start + 1;
 	}
 	release_free_pmem(nvdimm_bus, nd_mapping);
 	return max;
@@ -722,24 +770,33 @@ resource_size_t nd_pmem_available_dpa(struct nd_region *nd_region,
 	struct nvdimm_drvdata *ndd = to_ndd(nd_mapping);
 	struct resource *res;
 	const char *reason;
+	unsigned long align;
 
 	if (!ndd)
 		return 0;
 
+	align = dpa_align(nd_region);
+	if (!align)
+		return 0;
+
 	map_start = nd_mapping->start;
 	map_end = map_start + nd_mapping->size - 1;
 	blk_start = max(map_start, map_end + 1 - *overlap);
 	for_each_dpa_resource(ndd, res) {
-		if (res->start >= map_start && res->start < map_end) {
+		resource_size_t start, end;
+
+		start = ALIGN_DOWN(res->start, align);
+		end = ALIGN(res->end + 1, align) - 1;
+		if (start >= map_start && start < map_end) {
 			if (strncmp(res->name, "blk", 3) == 0)
 				blk_start = min(blk_start,
-						max(map_start, res->start));
-			else if (res->end > map_end) {
+						max(map_start, start));
+			else if (end > map_end) {
 				reason = "misaligned to iset";
 				goto err;
 			} else
-				busy += resource_size(res);
-		} else if (res->end >= map_start && res->end <= map_end) {
+				busy += end - start + 1;
+		} else if (end >= map_start && end <= map_end) {
 			if (strncmp(res->name, "blk", 3) == 0) {
 				/*
 				 * If a BLK allocation overlaps the start of
@@ -748,8 +805,8 @@ resource_size_t nd_pmem_available_dpa(struct nd_region *nd_region,
 				 */
 				blk_start = map_start;
 			} else
-				busy += resource_size(res);
-		} else if (map_start > res->start && map_start < res->end) {
+				busy += end - start + 1;
+		} else if (map_start > start && map_start < end) {
 			/* total eclipse of the mapping */
 			busy += nd_mapping->size;
 			blk_start = map_start;
@@ -759,7 +816,7 @@ resource_size_t nd_pmem_available_dpa(struct nd_region *nd_region,
 	*overlap = map_end + 1 - blk_start;
 	available = blk_start - map_start;
 	if (busy < available)
-		return available - busy;
+		return ALIGN_DOWN(available - busy, align);
 	return 0;
 
  err:
diff --git a/drivers/nvdimm/e820.c b/drivers/nvdimm/e820.c
index e02f60a..4cd18be 100644
--- a/drivers/nvdimm/e820.c
+++ b/drivers/nvdimm/e820.c
@@ -7,6 +7,7 @@
 #include <linux/memory_hotplug.h>
 #include <linux/libnvdimm.h>
 #include <linux/module.h>
+#include <linux/numa.h>
 
 static int e820_pmem_remove(struct platform_device *pdev)
 {
@@ -16,27 +17,16 @@ static int e820_pmem_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_MEMORY_HOTPLUG
-static int e820_range_to_nid(resource_size_t addr)
-{
-	return memory_add_physaddr_to_nid(addr);
-}
-#else
-static int e820_range_to_nid(resource_size_t addr)
-{
-	return NUMA_NO_NODE;
-}
-#endif
-
 static int e820_register_one(struct resource *res, void *data)
 {
 	struct nd_region_desc ndr_desc;
 	struct nvdimm_bus *nvdimm_bus = data;
+	int nid = phys_to_target_node(res->start);
 
 	memset(&ndr_desc, 0, sizeof(ndr_desc));
 	ndr_desc.res = res;
-	ndr_desc.numa_node = e820_range_to_nid(res->start);
-	ndr_desc.target_node = ndr_desc.numa_node;
+	ndr_desc.numa_node = numa_map_to_online_node(nid);
+	ndr_desc.target_node = nid;
 	set_bit(ND_REGION_PAGEMAP, &ndr_desc.flags);
 	if (!nvdimm_pmem_region_create(nvdimm_bus, &ndr_desc))
 		return -ENXIO;
diff --git a/drivers/nvdimm/label.h b/drivers/nvdimm/label.h
index 4c7b775..956b6d1 100644
--- a/drivers/nvdimm/label.h
+++ b/drivers/nvdimm/label.h
@@ -62,7 +62,7 @@ struct nd_namespace_index {
 	__le16 major;
 	__le16 minor;
 	__le64 checksum;
-	u8 free[0];
+	u8 free[];
 };
 
 /**
diff --git a/drivers/nvdimm/namespace_devs.c b/drivers/nvdimm/namespace_devs.c
index 032dc61..ae155e8 100644
--- a/drivers/nvdimm/namespace_devs.c
+++ b/drivers/nvdimm/namespace_devs.c
@@ -10,6 +10,7 @@
 #include <linux/nd.h>
 #include "nd-core.h"
 #include "pmem.h"
+#include "pfn.h"
 #include "nd.h"
 
 static void namespace_io_release(struct device *dev)
@@ -541,6 +542,11 @@ static void space_valid(struct nd_region *nd_region, struct nvdimm_drvdata *ndd,
 {
 	bool is_reserve = strcmp(label_id->id, "pmem-reserve") == 0;
 	bool is_pmem = strncmp(label_id->id, "pmem", 4) == 0;
+	unsigned long align;
+
+	align = nd_region->align / nd_region->ndr_mappings;
+	valid->start = ALIGN(valid->start, align);
+	valid->end = ALIGN_DOWN(valid->end + 1, align) - 1;
 
 	if (valid->start >= valid->end)
 		goto invalid;
@@ -980,10 +986,10 @@ static ssize_t __size_store(struct device *dev, unsigned long long val)
 		return -ENXIO;
 	}
 
-	div_u64_rem(val, PAGE_SIZE * nd_region->ndr_mappings, &remainder);
+	div_u64_rem(val, nd_region->align, &remainder);
 	if (remainder) {
 		dev_dbg(dev, "%llu is not %ldK aligned\n", val,
-				(PAGE_SIZE * nd_region->ndr_mappings) / SZ_1K);
+				nd_region->align / SZ_1K);
 		return -EINVAL;
 	}
 
@@ -1739,6 +1745,22 @@ struct nd_namespace_common *nvdimm_namespace_common_probe(struct device *dev)
 		return ERR_PTR(-ENODEV);
 	}
 
+	/*
+	 * Note, alignment validation for fsdax and devdax mode
+	 * namespaces happens in nd_pfn_validate() where infoblock
+	 * padding parameters can be applied.
+	 */
+	if (pmem_should_map_pages(dev)) {
+		struct nd_namespace_io *nsio = to_nd_namespace_io(&ndns->dev);
+		struct resource *res = &nsio->res;
+
+		if (!IS_ALIGNED(res->start | (res->end + 1),
+					memremap_compat_align())) {
+			dev_err(&ndns->dev, "%pr misaligned, unable to map\n", res);
+			return ERR_PTR(-EOPNOTSUPP);
+		}
+	}
+
 	if (is_namespace_pmem(&ndns->dev)) {
 		struct nd_namespace_pmem *nspm;
 
@@ -2521,7 +2543,7 @@ static int init_active_labels(struct nd_region *nd_region)
 		if (!ndd) {
 			if (test_bit(NDD_LOCKED, &nvdimm->flags))
 				/* fail, label data may be unreadable */;
-			else if (test_bit(NDD_ALIASING, &nvdimm->flags))
+			else if (test_bit(NDD_LABELING, &nvdimm->flags))
 				/* fail, labels needed to disambiguate dpa */;
 			else
 				return 0;
diff --git a/drivers/nvdimm/nd.h b/drivers/nvdimm/nd.h
index c9f6a5b..85dbb2a 100644
--- a/drivers/nvdimm/nd.h
+++ b/drivers/nvdimm/nd.h
@@ -39,7 +39,7 @@ struct nd_region_data {
 	int ns_count;
 	int ns_active;
 	unsigned int hints_shift;
-	void __iomem *flush_wpq[0];
+	void __iomem *flush_wpq[];
 };
 
 static inline void __iomem *ndrd_get_flush_wpq(struct nd_region_data *ndrd,
@@ -146,6 +146,7 @@ struct nd_region {
 	struct device *btt_seed;
 	struct device *pfn_seed;
 	struct device *dax_seed;
+	unsigned long align;
 	u16 ndr_mappings;
 	u64 ndr_size;
 	u64 ndr_start;
@@ -156,7 +157,7 @@ struct nd_region {
 	struct nd_interleave_set *nd_set;
 	struct nd_percpu_lane __percpu *lane;
 	int (*flush)(struct nd_region *nd_region, struct bio *bio);
-	struct nd_mapping mapping[0];
+	struct nd_mapping mapping[];
 };
 
 struct nd_blk_region {
@@ -252,7 +253,7 @@ int nvdimm_set_config_data(struct nvdimm_drvdata *ndd, size_t offset,
 		void *buf, size_t len);
 long nvdimm_clear_poison(struct device *dev, phys_addr_t phys,
 		unsigned int len);
-void nvdimm_set_aliasing(struct device *dev);
+void nvdimm_set_labeling(struct device *dev);
 void nvdimm_set_locked(struct device *dev);
 void nvdimm_clear_locked(struct device *dev);
 int nvdimm_security_setup_events(struct device *dev);
diff --git a/drivers/nvdimm/of_pmem.c b/drivers/nvdimm/of_pmem.c
index 8224d14..6826a27 100644
--- a/drivers/nvdimm/of_pmem.c
+++ b/drivers/nvdimm/of_pmem.c
@@ -62,8 +62,10 @@ static int of_pmem_region_probe(struct platform_device *pdev)
 
 		if (is_volatile)
 			region = nvdimm_volatile_region_create(bus, &ndr_desc);
-		else
+		else {
+			set_bit(ND_REGION_PERSIST_MEMCTRL, &ndr_desc.flags);
 			region = nvdimm_pmem_region_create(bus, &ndr_desc);
+		}
 
 		if (!region)
 			dev_warn(&pdev->dev, "Unable to register region %pR from %pOF\n",
diff --git a/drivers/nvdimm/pfn.h b/drivers/nvdimm/pfn.h
index acb1951..37cb1b8 100644
--- a/drivers/nvdimm/pfn.h
+++ b/drivers/nvdimm/pfn.h
@@ -24,6 +24,18 @@ struct nd_pfn_sb {
 	__le64 npfns;
 	__le32 mode;
 	/* minor-version-1 additions for section alignment */
+	/**
+	 * @start_pad: Deprecated attribute to pad start-misaligned namespaces
+	 *
+	 * start_pad is deprecated because the original definition did
+	 * not comprehend that dataoff is relative to the base address
+	 * of the namespace not the start_pad adjusted base. The result
+	 * is that the dax path is broken, but the block-I/O path is
+	 * not. The kernel will no longer create namespaces using start
+	 * padding, but it still supports block-I/O for legacy
+	 * configurations mainly to allow a backup, reconfigure the
+	 * namespace, and restore flow to repair dax operation.
+	 */
 	__le32 start_pad;
 	__le32 end_trunc;
 	/* minor-version-2 record the base alignment of the mapping */
diff --git a/drivers/nvdimm/pfn_devs.c b/drivers/nvdimm/pfn_devs.c
index b94f7a7..34db557 100644
--- a/drivers/nvdimm/pfn_devs.c
+++ b/drivers/nvdimm/pfn_devs.c
@@ -446,6 +446,7 @@ static bool nd_supported_alignment(unsigned long align)
 int nd_pfn_validate(struct nd_pfn *nd_pfn, const char *sig)
 {
 	u64 checksum, offset;
+	struct resource *res;
 	enum nd_pfn_mode mode;
 	struct nd_namespace_io *nsio;
 	unsigned long align, start_pad;
@@ -561,14 +562,14 @@ int nd_pfn_validate(struct nd_pfn *nd_pfn, const char *sig)
 			dev_dbg(&nd_pfn->dev, "align: %lx:%lx mode: %d:%d\n",
 					nd_pfn->align, align, nd_pfn->mode,
 					mode);
-			return -EINVAL;
+			return -EOPNOTSUPP;
 		}
 	}
 
 	if (align > nvdimm_namespace_capacity(ndns)) {
 		dev_err(&nd_pfn->dev, "alignment: %lx exceeds capacity %llx\n",
 				align, nvdimm_namespace_capacity(ndns));
-		return -EINVAL;
+		return -EOPNOTSUPP;
 	}
 
 	/*
@@ -578,18 +579,31 @@ int nd_pfn_validate(struct nd_pfn *nd_pfn, const char *sig)
 	 * established.
 	 */
 	nsio = to_nd_namespace_io(&ndns->dev);
-	if (offset >= resource_size(&nsio->res)) {
+	res = &nsio->res;
+	if (offset >= resource_size(res)) {
 		dev_err(&nd_pfn->dev, "pfn array size exceeds capacity of %s\n",
 				dev_name(&ndns->dev));
-		return -EBUSY;
+		return -EOPNOTSUPP;
 	}
 
-	if ((align && !IS_ALIGNED(nsio->res.start + offset + start_pad, align))
+	if ((align && !IS_ALIGNED(res->start + offset + start_pad, align))
 			|| !IS_ALIGNED(offset, PAGE_SIZE)) {
 		dev_err(&nd_pfn->dev,
 				"bad offset: %#llx dax disabled align: %#lx\n",
 				offset, align);
-		return -ENXIO;
+		return -EOPNOTSUPP;
+	}
+
+	if (!IS_ALIGNED(res->start + le32_to_cpu(pfn_sb->start_pad),
+				memremap_compat_align())) {
+		dev_err(&nd_pfn->dev, "resource start misaligned\n");
+		return -EOPNOTSUPP;
+	}
+
+	if (!IS_ALIGNED(res->end + 1 - le32_to_cpu(pfn_sb->end_trunc),
+				memremap_compat_align())) {
+		dev_err(&nd_pfn->dev, "resource end misaligned\n");
+		return -EOPNOTSUPP;
 	}
 
 	return 0;
@@ -750,7 +764,19 @@ static int nd_pfn_init(struct nd_pfn *nd_pfn)
 	start = nsio->res.start;
 	size = resource_size(&nsio->res);
 	npfns = PHYS_PFN(size - SZ_8K);
-	align = max(nd_pfn->align, (1UL << SUBSECTION_SHIFT));
+	align = max(nd_pfn->align, memremap_compat_align());
+
+	/*
+	 * When @start is misaligned fail namespace creation. See
+	 * the 'struct nd_pfn_sb' commentary on why ->start_pad is not
+	 * an option.
+	 */
+	if (!IS_ALIGNED(start, memremap_compat_align())) {
+		dev_err(&nd_pfn->dev, "%s: start %pa misaligned to %#lx\n",
+				dev_name(&ndns->dev), &start,
+				memremap_compat_align());
+		return -EINVAL;
+	}
 	end_trunc = start + size - ALIGN_DOWN(start + size, align);
 	if (nd_pfn->mode == PFN_MODE_PMEM) {
 		/*
diff --git a/drivers/nvdimm/pmem.c b/drivers/nvdimm/pmem.c
index 4ffc6f7..2df6994 100644
--- a/drivers/nvdimm/pmem.c
+++ b/drivers/nvdimm/pmem.c
@@ -136,9 +136,25 @@ static blk_status_t read_pmem(struct page *page, unsigned int off,
 	return BLK_STS_OK;
 }
 
-static blk_status_t pmem_do_bvec(struct pmem_device *pmem, struct page *page,
-			unsigned int len, unsigned int off, unsigned int op,
-			sector_t sector)
+static blk_status_t pmem_do_read(struct pmem_device *pmem,
+			struct page *page, unsigned int page_off,
+			sector_t sector, unsigned int len)
+{
+	blk_status_t rc;
+	phys_addr_t pmem_off = sector * 512 + pmem->data_offset;
+	void *pmem_addr = pmem->virt_addr + pmem_off;
+
+	if (unlikely(is_bad_pmem(&pmem->bb, sector, len)))
+		return BLK_STS_IOERR;
+
+	rc = read_pmem(page, page_off, pmem_addr, len);
+	flush_dcache_page(page);
+	return rc;
+}
+
+static blk_status_t pmem_do_write(struct pmem_device *pmem,
+			struct page *page, unsigned int page_off,
+			sector_t sector, unsigned int len)
 {
 	blk_status_t rc = BLK_STS_OK;
 	bool bad_pmem = false;
@@ -148,34 +164,25 @@ static blk_status_t pmem_do_bvec(struct pmem_device *pmem, struct page *page,
 	if (unlikely(is_bad_pmem(&pmem->bb, sector, len)))
 		bad_pmem = true;
 
-	if (!op_is_write(op)) {
-		if (unlikely(bad_pmem))
-			rc = BLK_STS_IOERR;
-		else {
-			rc = read_pmem(page, off, pmem_addr, len);
-			flush_dcache_page(page);
-		}
-	} else {
-		/*
-		 * Note that we write the data both before and after
-		 * clearing poison.  The write before clear poison
-		 * handles situations where the latest written data is
-		 * preserved and the clear poison operation simply marks
-		 * the address range as valid without changing the data.
-		 * In this case application software can assume that an
-		 * interrupted write will either return the new good
-		 * data or an error.
-		 *
-		 * However, if pmem_clear_poison() leaves the data in an
-		 * indeterminate state we need to perform the write
-		 * after clear poison.
-		 */
-		flush_dcache_page(page);
-		write_pmem(pmem_addr, page, off, len);
-		if (unlikely(bad_pmem)) {
-			rc = pmem_clear_poison(pmem, pmem_off, len);
-			write_pmem(pmem_addr, page, off, len);
-		}
+	/*
+	 * Note that we write the data both before and after
+	 * clearing poison.  The write before clear poison
+	 * handles situations where the latest written data is
+	 * preserved and the clear poison operation simply marks
+	 * the address range as valid without changing the data.
+	 * In this case application software can assume that an
+	 * interrupted write will either return the new good
+	 * data or an error.
+	 *
+	 * However, if pmem_clear_poison() leaves the data in an
+	 * indeterminate state we need to perform the write
+	 * after clear poison.
+	 */
+	flush_dcache_page(page);
+	write_pmem(pmem_addr, page, page_off, len);
+	if (unlikely(bad_pmem)) {
+		rc = pmem_clear_poison(pmem, pmem_off, len);
+		write_pmem(pmem_addr, page, page_off, len);
 	}
 
 	return rc;
@@ -197,8 +204,12 @@ static blk_qc_t pmem_make_request(struct request_queue *q, struct bio *bio)
 
 	do_acct = nd_iostat_start(bio, &start);
 	bio_for_each_segment(bvec, bio, iter) {
-		rc = pmem_do_bvec(pmem, bvec.bv_page, bvec.bv_len,
-				bvec.bv_offset, bio_op(bio), iter.bi_sector);
+		if (op_is_write(bio_op(bio)))
+			rc = pmem_do_write(pmem, bvec.bv_page, bvec.bv_offset,
+				iter.bi_sector, bvec.bv_len);
+		else
+			rc = pmem_do_read(pmem, bvec.bv_page, bvec.bv_offset,
+				iter.bi_sector, bvec.bv_len);
 		if (rc) {
 			bio->bi_status = rc;
 			break;
@@ -223,9 +234,12 @@ static int pmem_rw_page(struct block_device *bdev, sector_t sector,
 	struct pmem_device *pmem = bdev->bd_queue->queuedata;
 	blk_status_t rc;
 
-	rc = pmem_do_bvec(pmem, page, hpage_nr_pages(page) * PAGE_SIZE,
-			  0, op, sector);
-
+	if (op_is_write(op))
+		rc = pmem_do_write(pmem, page, 0, sector,
+				   hpage_nr_pages(page) * PAGE_SIZE);
+	else
+		rc = pmem_do_read(pmem, page, 0, sector,
+				   hpage_nr_pages(page) * PAGE_SIZE);
 	/*
 	 * The ->rw_page interface is subtle and tricky.  The core
 	 * retries on any error, so we can only invoke page_endio() in
@@ -268,6 +282,16 @@ static const struct block_device_operations pmem_fops = {
 	.revalidate_disk =	nvdimm_revalidate_disk,
 };
 
+static int pmem_dax_zero_page_range(struct dax_device *dax_dev, pgoff_t pgoff,
+				    size_t nr_pages)
+{
+	struct pmem_device *pmem = dax_get_private(dax_dev);
+
+	return blk_status_to_errno(pmem_do_write(pmem, ZERO_PAGE(0), 0,
+				   PFN_PHYS(pgoff) >> SECTOR_SHIFT,
+				   PAGE_SIZE));
+}
+
 static long pmem_dax_direct_access(struct dax_device *dax_dev,
 		pgoff_t pgoff, long nr_pages, void **kaddr, pfn_t *pfn)
 {
@@ -299,6 +323,7 @@ static const struct dax_operations pmem_dax_ops = {
 	.dax_supported = generic_fsdax_supported,
 	.copy_from_iter = pmem_copy_from_iter,
 	.copy_to_iter = pmem_copy_to_iter,
+	.zero_page_range = pmem_dax_zero_page_range,
 };
 
 static const struct attribute_group *pmem_attribute_groups[] = {
@@ -461,9 +486,9 @@ static int pmem_attach_disk(struct device *dev,
 	if (is_nvdimm_sync(nd_region))
 		flags = DAXDEV_F_SYNC;
 	dax_dev = alloc_dax(pmem, disk->disk_name, &pmem_dax_ops, flags);
-	if (!dax_dev) {
+	if (IS_ERR(dax_dev)) {
 		put_disk(disk);
-		return -ENOMEM;
+		return PTR_ERR(dax_dev);
 	}
 	dax_write_cache(dax_dev, nvdimm_has_cache(nd_region));
 	pmem->dax_dev = dax_dev;
diff --git a/drivers/nvdimm/region_devs.c b/drivers/nvdimm/region_devs.c
index a19e535..ccbb5b4 100644
--- a/drivers/nvdimm/region_devs.c
+++ b/drivers/nvdimm/region_devs.c
@@ -195,16 +195,16 @@ EXPORT_SYMBOL_GPL(nd_blk_region_set_provider_data);
 int nd_region_to_nstype(struct nd_region *nd_region)
 {
 	if (is_memory(&nd_region->dev)) {
-		u16 i, alias;
+		u16 i, label;
 
-		for (i = 0, alias = 0; i < nd_region->ndr_mappings; i++) {
+		for (i = 0, label = 0; i < nd_region->ndr_mappings; i++) {
 			struct nd_mapping *nd_mapping = &nd_region->mapping[i];
 			struct nvdimm *nvdimm = nd_mapping->nvdimm;
 
-			if (test_bit(NDD_ALIASING, &nvdimm->flags))
-				alias++;
+			if (test_bit(NDD_LABELING, &nvdimm->flags))
+				label++;
 		}
-		if (alias)
+		if (label)
 			return ND_DEVICE_NAMESPACE_PMEM;
 		else
 			return ND_DEVICE_NAMESPACE_IO;
@@ -216,21 +216,25 @@ int nd_region_to_nstype(struct nd_region *nd_region)
 }
 EXPORT_SYMBOL(nd_region_to_nstype);
 
+static unsigned long long region_size(struct nd_region *nd_region)
+{
+	if (is_memory(&nd_region->dev)) {
+		return nd_region->ndr_size;
+	} else if (nd_region->ndr_mappings == 1) {
+		struct nd_mapping *nd_mapping = &nd_region->mapping[0];
+
+		return nd_mapping->size;
+	}
+
+	return 0;
+}
+
 static ssize_t size_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
 	struct nd_region *nd_region = to_nd_region(dev);
-	unsigned long long size = 0;
 
-	if (is_memory(dev)) {
-		size = nd_region->ndr_size;
-	} else if (nd_region->ndr_mappings == 1) {
-		struct nd_mapping *nd_mapping = &nd_region->mapping[0];
-
-		size = nd_mapping->size;
-	}
-
-	return sprintf(buf, "%llu\n", size);
+	return sprintf(buf, "%llu\n", region_size(nd_region));
 }
 static DEVICE_ATTR_RO(size);
 
@@ -529,6 +533,54 @@ static ssize_t read_only_store(struct device *dev,
 }
 static DEVICE_ATTR_RW(read_only);
 
+static ssize_t align_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct nd_region *nd_region = to_nd_region(dev);
+
+	return sprintf(buf, "%#lx\n", nd_region->align);
+}
+
+static ssize_t align_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t len)
+{
+	struct nd_region *nd_region = to_nd_region(dev);
+	unsigned long val, dpa;
+	u32 remainder;
+	int rc;
+
+	rc = kstrtoul(buf, 0, &val);
+	if (rc)
+		return rc;
+
+	if (!nd_region->ndr_mappings)
+		return -ENXIO;
+
+	/*
+	 * Ensure space-align is evenly divisible by the region
+	 * interleave-width because the kernel typically has no facility
+	 * to determine which DIMM(s), dimm-physical-addresses, would
+	 * contribute to the tail capacity in system-physical-address
+	 * space for the namespace.
+	 */
+	dpa = div_u64_rem(val, nd_region->ndr_mappings, &remainder);
+	if (!is_power_of_2(dpa) || dpa < PAGE_SIZE
+			|| val > region_size(nd_region) || remainder)
+		return -EINVAL;
+
+	/*
+	 * Given that space allocation consults this value multiple
+	 * times ensure it does not change for the duration of the
+	 * allocation.
+	 */
+	nvdimm_bus_lock(dev);
+	nd_region->align = val;
+	nvdimm_bus_unlock(dev);
+
+	return len;
+}
+static DEVICE_ATTR_RW(align);
+
 static ssize_t region_badblocks_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
@@ -571,6 +623,7 @@ static DEVICE_ATTR_RO(persistence_domain);
 
 static struct attribute *nd_region_attributes[] = {
 	&dev_attr_size.attr,
+	&dev_attr_align.attr,
 	&dev_attr_nstype.attr,
 	&dev_attr_mappings.attr,
 	&dev_attr_btt_seed.attr,
@@ -626,6 +679,19 @@ static umode_t region_visible(struct kobject *kobj, struct attribute *a, int n)
 		return a->mode;
 	}
 
+	if (a == &dev_attr_align.attr) {
+		int i;
+
+		for (i = 0; i < nd_region->ndr_mappings; i++) {
+			struct nd_mapping *nd_mapping = &nd_region->mapping[i];
+			struct nvdimm *nvdimm = nd_mapping->nvdimm;
+
+			if (test_bit(NDD_LABELING, &nvdimm->flags))
+				return a->mode;
+		}
+		return 0;
+	}
+
 	if (a != &dev_attr_set_cookie.attr
 			&& a != &dev_attr_available_size.attr)
 		return a->mode;
@@ -935,6 +1001,41 @@ void nd_region_release_lane(struct nd_region *nd_region, unsigned int lane)
 }
 EXPORT_SYMBOL(nd_region_release_lane);
 
+/*
+ * PowerPC requires this alignment for memremap_pages(). All other archs
+ * should be ok with SUBSECTION_SIZE (see memremap_compat_align()).
+ */
+#define MEMREMAP_COMPAT_ALIGN_MAX SZ_16M
+
+static unsigned long default_align(struct nd_region *nd_region)
+{
+	unsigned long align;
+	int i, mappings;
+	u32 remainder;
+
+	if (is_nd_blk(&nd_region->dev))
+		align = PAGE_SIZE;
+	else
+		align = MEMREMAP_COMPAT_ALIGN_MAX;
+
+	for (i = 0; i < nd_region->ndr_mappings; i++) {
+		struct nd_mapping *nd_mapping = &nd_region->mapping[i];
+		struct nvdimm *nvdimm = nd_mapping->nvdimm;
+
+		if (test_bit(NDD_ALIASING, &nvdimm->flags)) {
+			align = MEMREMAP_COMPAT_ALIGN_MAX;
+			break;
+		}
+	}
+
+	mappings = max_t(u16, 1, nd_region->ndr_mappings);
+	div_u64_rem(align, mappings, &remainder);
+	if (remainder)
+		align *= mappings;
+
+	return align;
+}
+
 static struct nd_region *nd_region_create(struct nvdimm_bus *nvdimm_bus,
 		struct nd_region_desc *ndr_desc,
 		const struct device_type *dev_type, const char *caller)
@@ -1039,6 +1140,7 @@ static struct nd_region *nd_region_create(struct nvdimm_bus *nvdimm_bus,
 	dev->of_node = ndr_desc->of_node;
 	nd_region->ndr_size = resource_size(ndr_desc->res);
 	nd_region->ndr_start = ndr_desc->res->start;
+	nd_region->align = default_align(nd_region);
 	if (ndr_desc->flush)
 		nd_region->flush = ndr_desc->flush;
 	else
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 4f907e3..91c1bd6 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -6,6 +6,7 @@
 
 #include <linux/blkdev.h>
 #include <linux/blk-mq.h>
+#include <linux/compat.h>
 #include <linux/delay.h>
 #include <linux/errno.h>
 #include <linux/hdreg.h>
@@ -1252,6 +1253,18 @@ static void nvme_enable_aen(struct nvme_ctrl *ctrl)
 	queue_work(nvme_wq, &ctrl->async_event_work);
 }
 
+/*
+ * Convert integer values from ioctl structures to user pointers, silently
+ * ignoring the upper bits in the compat case to match behaviour of 32-bit
+ * kernels.
+ */
+static void __user *nvme_to_user_ptr(uintptr_t ptrval)
+{
+	if (in_compat_syscall())
+		ptrval = (compat_uptr_t)ptrval;
+	return (void __user *)ptrval;
+}
+
 static int nvme_submit_io(struct nvme_ns *ns, struct nvme_user_io __user *uio)
 {
 	struct nvme_user_io io;
@@ -1275,7 +1288,7 @@ static int nvme_submit_io(struct nvme_ns *ns, struct nvme_user_io __user *uio)
 
 	length = (io.nblocks + 1) << ns->lba_shift;
 	meta_len = (io.nblocks + 1) * ns->ms;
-	metadata = (void __user *)(uintptr_t)io.metadata;
+	metadata = nvme_to_user_ptr(io.metadata);
 
 	if (ns->ext) {
 		length += meta_len;
@@ -1298,7 +1311,7 @@ static int nvme_submit_io(struct nvme_ns *ns, struct nvme_user_io __user *uio)
 	c.rw.appmask = cpu_to_le16(io.appmask);
 
 	return nvme_submit_user_cmd(ns->queue, &c,
-			(void __user *)(uintptr_t)io.addr, length,
+			nvme_to_user_ptr(io.addr), length,
 			metadata, meta_len, lower_32_bits(io.slba), NULL, 0);
 }
 
@@ -1418,9 +1431,9 @@ static int nvme_user_cmd(struct nvme_ctrl *ctrl, struct nvme_ns *ns,
 
 	effects = nvme_passthru_start(ctrl, ns, cmd.opcode);
 	status = nvme_submit_user_cmd(ns ? ns->queue : ctrl->admin_q, &c,
-			(void __user *)(uintptr_t)cmd.addr, cmd.data_len,
-			(void __user *)(uintptr_t)cmd.metadata,
-			cmd.metadata_len, 0, &result, timeout);
+			nvme_to_user_ptr(cmd.addr), cmd.data_len,
+			nvme_to_user_ptr(cmd.metadata), cmd.metadata_len,
+			0, &result, timeout);
 	nvme_passthru_end(ctrl, effects);
 
 	if (status >= 0) {
@@ -1465,8 +1478,8 @@ static int nvme_user_cmd64(struct nvme_ctrl *ctrl, struct nvme_ns *ns,
 
 	effects = nvme_passthru_start(ctrl, ns, cmd.opcode);
 	status = nvme_submit_user_cmd(ns ? ns->queue : ctrl->admin_q, &c,
-			(void __user *)(uintptr_t)cmd.addr, cmd.data_len,
-			(void __user *)(uintptr_t)cmd.metadata, cmd.metadata_len,
+			nvme_to_user_ptr(cmd.addr), cmd.data_len,
+			nvme_to_user_ptr(cmd.metadata), cmd.metadata_len,
 			0, &cmd.result, timeout);
 	nvme_passthru_end(ctrl, effects);
 
@@ -1884,6 +1897,13 @@ static void __nvme_revalidate_disk(struct gendisk *disk, struct nvme_id_ns *id)
 	if (ns->head->disk) {
 		nvme_update_disk_info(ns->head->disk, ns, id);
 		blk_queue_stack_limits(ns->head->disk->queue, ns->queue);
+		if (bdi_cap_stable_pages_required(ns->queue->backing_dev_info)) {
+			struct backing_dev_info *info =
+				ns->head->disk->queue->backing_dev_info;
+
+                        info->capabilities |= BDI_CAP_STABLE_WRITES;
+		}
+
 		revalidate_disk(ns->head->disk);
 	}
 #endif
diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c
index a8bf2fb..7dfc4a2 100644
--- a/drivers/nvme/host/fc.c
+++ b/drivers/nvme/host/fc.c
@@ -342,8 +342,7 @@ nvme_fc_register_localport(struct nvme_fc_port_info *pinfo,
 	    !template->ls_req || !template->fcp_io ||
 	    !template->ls_abort || !template->fcp_abort ||
 	    !template->max_hw_queues || !template->max_sgl_segments ||
-	    !template->max_dif_sgl_segments || !template->dma_boundary ||
-	    !template->module) {
+	    !template->max_dif_sgl_segments || !template->dma_boundary) {
 		ret = -EINVAL;
 		goto out_reghost_failed;
 	}
@@ -2016,7 +2015,6 @@ nvme_fc_ctrl_free(struct kref *ref)
 {
 	struct nvme_fc_ctrl *ctrl =
 		container_of(ref, struct nvme_fc_ctrl, ref);
-	struct nvme_fc_lport *lport = ctrl->lport;
 	unsigned long flags;
 
 	if (ctrl->ctrl.tagset) {
@@ -2043,7 +2041,6 @@ nvme_fc_ctrl_free(struct kref *ref)
 	if (ctrl->ctrl.opts)
 		nvmf_free_options(ctrl->ctrl.opts);
 	kfree(ctrl);
-	module_put(lport->ops->module);
 }
 
 static void
@@ -3074,15 +3071,10 @@ nvme_fc_init_ctrl(struct device *dev, struct nvmf_ctrl_options *opts,
 		goto out_fail;
 	}
 
-	if (!try_module_get(lport->ops->module)) {
-		ret = -EUNATCH;
-		goto out_free_ctrl;
-	}
-
 	idx = ida_simple_get(&nvme_fc_ctrl_cnt, 0, 0, GFP_KERNEL);
 	if (idx < 0) {
 		ret = -ENOSPC;
-		goto out_mod_put;
+		goto out_free_ctrl;
 	}
 
 	ctrl->ctrl.opts = opts;
@@ -3232,8 +3224,6 @@ nvme_fc_init_ctrl(struct device *dev, struct nvmf_ctrl_options *opts,
 out_free_ida:
 	put_device(ctrl->dev);
 	ida_simple_remove(&nvme_fc_ctrl_cnt, ctrl->cnum);
-out_mod_put:
-	module_put(lport->ops->module);
 out_free_ctrl:
 	kfree(ctrl);
 out_fail:
diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c
index 61bf875..54603bd 100644
--- a/drivers/nvme/host/multipath.c
+++ b/drivers/nvme/host/multipath.c
@@ -510,7 +510,7 @@ static int nvme_update_ana_state(struct nvme_ctrl *ctrl,
 	if (!nr_nsids)
 		return 0;
 
-	down_write(&ctrl->namespaces_rwsem);
+	down_read(&ctrl->namespaces_rwsem);
 	list_for_each_entry(ns, &ctrl->namespaces, list) {
 		unsigned nsid = le32_to_cpu(desc->nsids[n]);
 
@@ -521,7 +521,7 @@ static int nvme_update_ana_state(struct nvme_ctrl *ctrl,
 		if (++n == nr_nsids)
 			break;
 	}
-	up_write(&ctrl->namespaces_rwsem);
+	up_read(&ctrl->namespaces_rwsem);
 	return 0;
 }
 
diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c
index 86603d9..cac8a93 100644
--- a/drivers/nvme/host/rdma.c
+++ b/drivers/nvme/host/rdma.c
@@ -142,14 +142,6 @@ static void nvme_rdma_recv_done(struct ib_cq *cq, struct ib_wc *wc);
 static const struct blk_mq_ops nvme_rdma_mq_ops;
 static const struct blk_mq_ops nvme_rdma_admin_mq_ops;
 
-/* XXX: really should move to a generic header sooner or later.. */
-static inline void put_unaligned_le24(u32 val, u8 *p)
-{
-	*p++ = val;
-	*p++ = val >> 8;
-	*p++ = val >> 16;
-}
-
 static inline int nvme_rdma_queue_idx(struct nvme_rdma_queue *queue)
 {
 	return queue - queue->ctrl->queues;
@@ -1350,7 +1342,7 @@ static int nvme_rdma_post_send(struct nvme_rdma_queue *queue,
 	int ret;
 
 	sge->addr   = qe->dma;
-	sge->length = sizeof(struct nvme_command),
+	sge->length = sizeof(struct nvme_command);
 	sge->lkey   = queue->device->pd->local_dma_lkey;
 
 	wr.next       = NULL;
diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c
index 0ef14f0..c15a921 100644
--- a/drivers/nvme/host/tcp.c
+++ b/drivers/nvme/host/tcp.c
@@ -174,16 +174,14 @@ static inline bool nvme_tcp_async_req(struct nvme_tcp_request *req)
 static inline bool nvme_tcp_has_inline_data(struct nvme_tcp_request *req)
 {
 	struct request *rq;
-	unsigned int bytes;
 
 	if (unlikely(nvme_tcp_async_req(req)))
 		return false; /* async events don't have a request */
 
 	rq = blk_mq_rq_from_pdu(req);
-	bytes = blk_rq_payload_bytes(rq);
 
-	return rq_data_dir(rq) == WRITE && bytes &&
-		bytes <= nvme_tcp_inline_data_size(req->queue);
+	return rq_data_dir(rq) == WRITE && req->data_len &&
+		req->data_len <= nvme_tcp_inline_data_size(req->queue);
 }
 
 static inline struct page *nvme_tcp_req_cur_page(struct nvme_tcp_request *req)
@@ -1075,7 +1073,7 @@ static void nvme_tcp_io_work(struct work_struct *w)
 		if (result > 0)
 			pending = true;
 		else if (unlikely(result < 0))
-			break;
+			return;
 
 		if (!pending)
 			return;
@@ -2164,7 +2162,9 @@ static blk_status_t nvme_tcp_map_data(struct nvme_tcp_queue *queue,
 
 	c->common.flags |= NVME_CMD_SGL_METABUF;
 
-	if (rq_data_dir(rq) == WRITE && req->data_len &&
+	if (!blk_rq_nr_phys_segments(rq))
+		nvme_tcp_set_sg_null(c);
+	else if (rq_data_dir(rq) == WRITE &&
 	    req->data_len <= nvme_tcp_inline_data_size(queue))
 		nvme_tcp_set_sg_inline(queue, c, req->data_len);
 	else
@@ -2191,7 +2191,8 @@ static blk_status_t nvme_tcp_setup_cmd_pdu(struct nvme_ns *ns,
 	req->data_sent = 0;
 	req->pdu_len = 0;
 	req->pdu_sent = 0;
-	req->data_len = blk_rq_payload_bytes(rq);
+	req->data_len = blk_rq_nr_phys_segments(rq) ?
+				blk_rq_payload_bytes(rq) : 0;
 	req->curr_bio = rq->bio;
 
 	if (rq_data_dir(rq) == WRITE &&
@@ -2298,6 +2299,9 @@ static int nvme_tcp_poll(struct blk_mq_hw_ctx *hctx)
 	struct nvme_tcp_queue *queue = hctx->driver_data;
 	struct sock *sk = queue->sock->sk;
 
+	if (!test_bit(NVME_TCP_Q_LIVE, &queue->flags))
+		return 0;
+
 	if (sk_can_busy_loop(sk) && skb_queue_empty_lockless(&sk->sk_receive_queue))
 		sk_busy_loop(sk, true);
 	nvme_tcp_try_recv(queue);
diff --git a/drivers/nvme/target/configfs.c b/drivers/nvme/target/configfs.c
index 7aa1078..58cabd7 100644
--- a/drivers/nvme/target/configfs.c
+++ b/drivers/nvme/target/configfs.c
@@ -1098,12 +1098,19 @@ static struct configfs_attribute *nvmet_referral_attrs[] = {
 	NULL,
 };
 
-static void nvmet_referral_release(struct config_item *item)
+static void nvmet_referral_notify(struct config_group *group,
+		struct config_item *item)
 {
 	struct nvmet_port *parent = to_nvmet_port(item->ci_parent->ci_parent);
 	struct nvmet_port *port = to_nvmet_port(item);
 
 	nvmet_referral_disable(parent, port);
+}
+
+static void nvmet_referral_release(struct config_item *item)
+{
+	struct nvmet_port *port = to_nvmet_port(item);
+
 	kfree(port);
 }
 
@@ -1134,6 +1141,7 @@ static struct config_group *nvmet_referral_make(
 
 static struct configfs_group_operations nvmet_referral_group_ops = {
 	.make_group		= nvmet_referral_make,
+	.disconnect_notify	= nvmet_referral_notify,
 };
 
 static const struct config_item_type nvmet_referrals_type = {
diff --git a/drivers/nvme/target/fc.c b/drivers/nvme/target/fc.c
index a0db637..a8ceb77 100644
--- a/drivers/nvme/target/fc.c
+++ b/drivers/nvme/target/fc.c
@@ -684,7 +684,7 @@ nvmet_fc_delete_target_queue(struct nvmet_fc_tgt_queue *queue)
 	disconnect = atomic_xchg(&queue->connected, 0);
 
 	spin_lock_irqsave(&queue->qlock, flags);
-	/* about outstanding io's */
+	/* abort outstanding io's */
 	for (i = 0; i < queue->sqsize; fod++, i++) {
 		if (fod->active) {
 			spin_lock(&fod->flock);
diff --git a/drivers/nvme/target/fcloop.c b/drivers/nvme/target/fcloop.c
index 1c50af6..f69ce66 100644
--- a/drivers/nvme/target/fcloop.c
+++ b/drivers/nvme/target/fcloop.c
@@ -198,10 +198,13 @@ struct fcloop_lport_priv {
 };
 
 struct fcloop_rport {
-	struct nvme_fc_remote_port *remoteport;
-	struct nvmet_fc_target_port *targetport;
-	struct fcloop_nport *nport;
-	struct fcloop_lport *lport;
+	struct nvme_fc_remote_port	*remoteport;
+	struct nvmet_fc_target_port	*targetport;
+	struct fcloop_nport		*nport;
+	struct fcloop_lport		*lport;
+	spinlock_t			lock;
+	struct list_head		ls_list;
+	struct work_struct		ls_work;
 };
 
 struct fcloop_tport {
@@ -224,11 +227,10 @@ struct fcloop_nport {
 };
 
 struct fcloop_lsreq {
-	struct fcloop_tport		*tport;
 	struct nvmefc_ls_req		*lsreq;
-	struct work_struct		work;
 	struct nvmefc_tgt_ls_req	tgt_ls_req;
 	int				status;
+	struct list_head		ls_list; /* fcloop_rport->ls_list */
 };
 
 struct fcloop_rscn {
@@ -292,21 +294,32 @@ fcloop_delete_queue(struct nvme_fc_local_port *localport,
 {
 }
 
-
-/*
- * Transmit of LS RSP done (e.g. buffers all set). call back up
- * initiator "done" flows.
- */
 static void
-fcloop_tgt_lsrqst_done_work(struct work_struct *work)
+fcloop_rport_lsrqst_work(struct work_struct *work)
 {
-	struct fcloop_lsreq *tls_req =
-		container_of(work, struct fcloop_lsreq, work);
-	struct fcloop_tport *tport = tls_req->tport;
-	struct nvmefc_ls_req *lsreq = tls_req->lsreq;
+	struct fcloop_rport *rport =
+		container_of(work, struct fcloop_rport, ls_work);
+	struct fcloop_lsreq *tls_req;
 
-	if (!tport || tport->remoteport)
-		lsreq->done(lsreq, tls_req->status);
+	spin_lock(&rport->lock);
+	for (;;) {
+		tls_req = list_first_entry_or_null(&rport->ls_list,
+				struct fcloop_lsreq, ls_list);
+		if (!tls_req)
+			break;
+
+		list_del(&tls_req->ls_list);
+		spin_unlock(&rport->lock);
+
+		tls_req->lsreq->done(tls_req->lsreq, tls_req->status);
+		/*
+		 * callee may free memory containing tls_req.
+		 * do not reference lsreq after this.
+		 */
+
+		spin_lock(&rport->lock);
+	}
+	spin_unlock(&rport->lock);
 }
 
 static int
@@ -319,17 +332,18 @@ fcloop_ls_req(struct nvme_fc_local_port *localport,
 	int ret = 0;
 
 	tls_req->lsreq = lsreq;
-	INIT_WORK(&tls_req->work, fcloop_tgt_lsrqst_done_work);
+	INIT_LIST_HEAD(&tls_req->ls_list);
 
 	if (!rport->targetport) {
 		tls_req->status = -ECONNREFUSED;
-		tls_req->tport = NULL;
-		schedule_work(&tls_req->work);
+		spin_lock(&rport->lock);
+		list_add_tail(&rport->ls_list, &tls_req->ls_list);
+		spin_unlock(&rport->lock);
+		schedule_work(&rport->ls_work);
 		return ret;
 	}
 
 	tls_req->status = 0;
-	tls_req->tport = rport->targetport->private;
 	ret = nvmet_fc_rcv_ls_req(rport->targetport, &tls_req->tgt_ls_req,
 				 lsreq->rqstaddr, lsreq->rqstlen);
 
@@ -337,18 +351,28 @@ fcloop_ls_req(struct nvme_fc_local_port *localport,
 }
 
 static int
-fcloop_xmt_ls_rsp(struct nvmet_fc_target_port *tport,
+fcloop_xmt_ls_rsp(struct nvmet_fc_target_port *targetport,
 			struct nvmefc_tgt_ls_req *tgt_lsreq)
 {
 	struct fcloop_lsreq *tls_req = tgt_ls_req_to_lsreq(tgt_lsreq);
 	struct nvmefc_ls_req *lsreq = tls_req->lsreq;
+	struct fcloop_tport *tport = targetport->private;
+	struct nvme_fc_remote_port *remoteport = tport->remoteport;
+	struct fcloop_rport *rport;
 
 	memcpy(lsreq->rspaddr, tgt_lsreq->rspbuf,
 		((lsreq->rsplen < tgt_lsreq->rsplen) ?
 				lsreq->rsplen : tgt_lsreq->rsplen));
+
 	tgt_lsreq->done(tgt_lsreq);
 
-	schedule_work(&tls_req->work);
+	if (remoteport) {
+		rport = remoteport->private;
+		spin_lock(&rport->lock);
+		list_add_tail(&rport->ls_list, &tls_req->ls_list);
+		spin_unlock(&rport->lock);
+		schedule_work(&rport->ls_work);
+	}
 
 	return 0;
 }
@@ -834,6 +858,7 @@ fcloop_remoteport_delete(struct nvme_fc_remote_port *remoteport)
 {
 	struct fcloop_rport *rport = remoteport->private;
 
+	flush_work(&rport->ls_work);
 	fcloop_nport_put(rport->nport);
 }
 
@@ -850,7 +875,6 @@ fcloop_targetport_delete(struct nvmet_fc_target_port *targetport)
 #define FCLOOP_DMABOUND_4G		0xFFFFFFFF
 
 static struct nvme_fc_port_template fctemplate = {
-	.module			= THIS_MODULE,
 	.localport_delete	= fcloop_localport_delete,
 	.remoteport_delete	= fcloop_remoteport_delete,
 	.create_queue		= fcloop_create_queue,
@@ -1136,6 +1160,9 @@ fcloop_create_remote_port(struct device *dev, struct device_attribute *attr,
 	rport->nport = nport;
 	rport->lport = nport->lport;
 	nport->rport = rport;
+	spin_lock_init(&rport->lock);
+	INIT_WORK(&rport->ls_work, fcloop_rport_lsrqst_work);
+	INIT_LIST_HEAD(&rport->ls_list);
 
 	return count;
 }
diff --git a/drivers/nvme/target/rdma.c b/drivers/nvme/target/rdma.c
index 9e1b8c6..fd47de0 100644
--- a/drivers/nvme/target/rdma.c
+++ b/drivers/nvme/target/rdma.c
@@ -78,6 +78,7 @@ enum nvmet_rdma_queue_state {
 
 struct nvmet_rdma_queue {
 	struct rdma_cm_id	*cm_id;
+	struct ib_qp		*qp;
 	struct nvmet_port	*port;
 	struct ib_cq		*cq;
 	atomic_t		sq_wr_avail;
@@ -105,6 +106,13 @@ struct nvmet_rdma_queue {
 	struct list_head	queue_list;
 };
 
+struct nvmet_rdma_port {
+	struct nvmet_port	*nport;
+	struct sockaddr_storage addr;
+	struct rdma_cm_id	*cm_id;
+	struct delayed_work	repair_work;
+};
+
 struct nvmet_rdma_device {
 	struct ib_device	*device;
 	struct ib_pd		*pd;
@@ -146,12 +154,6 @@ static int num_pages(int len)
 	return 1 + (((len - 1) & PAGE_MASK) >> PAGE_SHIFT);
 }
 
-/* XXX: really should move to a generic header sooner or later.. */
-static inline u32 get_unaligned_le24(const u8 *p)
-{
-	return (u32)p[0] | (u32)p[1] << 8 | (u32)p[2] << 16;
-}
-
 static inline bool nvmet_rdma_need_data_in(struct nvmet_rdma_rsp *rsp)
 {
 	return nvme_is_write(rsp->req.cmd) &&
@@ -467,7 +469,7 @@ static int nvmet_rdma_post_recv(struct nvmet_rdma_device *ndev,
 	if (ndev->srq)
 		ret = ib_post_srq_recv(ndev->srq, &cmd->wr, NULL);
 	else
-		ret = ib_post_recv(cmd->queue->cm_id->qp, &cmd->wr, NULL);
+		ret = ib_post_recv(cmd->queue->qp, &cmd->wr, NULL);
 
 	if (unlikely(ret))
 		pr_err("post_recv cmd failed\n");
@@ -506,7 +508,7 @@ static void nvmet_rdma_release_rsp(struct nvmet_rdma_rsp *rsp)
 	atomic_add(1 + rsp->n_rdma, &queue->sq_wr_avail);
 
 	if (rsp->n_rdma) {
-		rdma_rw_ctx_destroy(&rsp->rw, queue->cm_id->qp,
+		rdma_rw_ctx_destroy(&rsp->rw, queue->qp,
 				queue->cm_id->port_num, rsp->req.sg,
 				rsp->req.sg_cnt, nvmet_data_dir(&rsp->req));
 	}
@@ -590,7 +592,7 @@ static void nvmet_rdma_read_data_done(struct ib_cq *cq, struct ib_wc *wc)
 
 	WARN_ON(rsp->n_rdma <= 0);
 	atomic_add(rsp->n_rdma, &queue->sq_wr_avail);
-	rdma_rw_ctx_destroy(&rsp->rw, queue->cm_id->qp,
+	rdma_rw_ctx_destroy(&rsp->rw, queue->qp,
 			queue->cm_id->port_num, rsp->req.sg,
 			rsp->req.sg_cnt, nvmet_data_dir(&rsp->req));
 	rsp->n_rdma = 0;
@@ -745,7 +747,7 @@ static bool nvmet_rdma_execute_command(struct nvmet_rdma_rsp *rsp)
 	}
 
 	if (nvmet_rdma_need_data_in(rsp)) {
-		if (rdma_rw_ctx_post(&rsp->rw, queue->cm_id->qp,
+		if (rdma_rw_ctx_post(&rsp->rw, queue->qp,
 				queue->cm_id->port_num, &rsp->read_cqe, NULL))
 			nvmet_req_complete(&rsp->req, NVME_SC_DATA_XFER_ERROR);
 	} else {
@@ -917,7 +919,8 @@ static void nvmet_rdma_free_dev(struct kref *ref)
 static struct nvmet_rdma_device *
 nvmet_rdma_find_get_device(struct rdma_cm_id *cm_id)
 {
-	struct nvmet_port *port = cm_id->context;
+	struct nvmet_rdma_port *port = cm_id->context;
+	struct nvmet_port *nport = port->nport;
 	struct nvmet_rdma_device *ndev;
 	int inline_page_count;
 	int inline_sge_count;
@@ -934,17 +937,17 @@ nvmet_rdma_find_get_device(struct rdma_cm_id *cm_id)
 	if (!ndev)
 		goto out_err;
 
-	inline_page_count = num_pages(port->inline_data_size);
+	inline_page_count = num_pages(nport->inline_data_size);
 	inline_sge_count = max(cm_id->device->attrs.max_sge_rd,
 				cm_id->device->attrs.max_recv_sge) - 1;
 	if (inline_page_count > inline_sge_count) {
 		pr_warn("inline_data_size %d cannot be supported by device %s. Reducing to %lu.\n",
-			port->inline_data_size, cm_id->device->name,
+			nport->inline_data_size, cm_id->device->name,
 			inline_sge_count * PAGE_SIZE);
-		port->inline_data_size = inline_sge_count * PAGE_SIZE;
+		nport->inline_data_size = inline_sge_count * PAGE_SIZE;
 		inline_page_count = inline_sge_count;
 	}
-	ndev->inline_data_size = port->inline_data_size;
+	ndev->inline_data_size = nport->inline_data_size;
 	ndev->inline_page_count = inline_page_count;
 	ndev->device = cm_id->device;
 	kref_init(&ndev->ref);
@@ -1030,6 +1033,7 @@ static int nvmet_rdma_create_queue_ib(struct nvmet_rdma_queue *queue)
 		pr_err("failed to create_qp ret= %d\n", ret);
 		goto err_destroy_cq;
 	}
+	queue->qp = queue->cm_id->qp;
 
 	atomic_set(&queue->sq_wr_avail, qp_attr.cap.max_send_wr);
 
@@ -1058,11 +1062,10 @@ static int nvmet_rdma_create_queue_ib(struct nvmet_rdma_queue *queue)
 
 static void nvmet_rdma_destroy_queue_ib(struct nvmet_rdma_queue *queue)
 {
-	struct ib_qp *qp = queue->cm_id->qp;
-
-	ib_drain_qp(qp);
-	rdma_destroy_id(queue->cm_id);
-	ib_destroy_qp(qp);
+	ib_drain_qp(queue->qp);
+	if (queue->cm_id)
+		rdma_destroy_id(queue->cm_id);
+	ib_destroy_qp(queue->qp);
 	ib_free_cq(queue->cq);
 }
 
@@ -1272,6 +1275,7 @@ static int nvmet_rdma_cm_accept(struct rdma_cm_id *cm_id,
 static int nvmet_rdma_queue_connect(struct rdma_cm_id *cm_id,
 		struct rdma_cm_event *event)
 {
+	struct nvmet_rdma_port *port = cm_id->context;
 	struct nvmet_rdma_device *ndev;
 	struct nvmet_rdma_queue *queue;
 	int ret = -EINVAL;
@@ -1287,7 +1291,7 @@ static int nvmet_rdma_queue_connect(struct rdma_cm_id *cm_id,
 		ret = -ENOMEM;
 		goto put_device;
 	}
-	queue->port = cm_id->context;
+	queue->port = port->nport;
 
 	if (queue->host_qid == 0) {
 		/* Let inflight controller teardown complete */
@@ -1296,9 +1300,12 @@ static int nvmet_rdma_queue_connect(struct rdma_cm_id *cm_id,
 
 	ret = nvmet_rdma_cm_accept(cm_id, queue, &event->param.conn);
 	if (ret) {
-		schedule_work(&queue->release_work);
-		/* Destroying rdma_cm id is not needed here */
-		return 0;
+		/*
+		 * Don't destroy the cm_id in free path, as we implicitly
+		 * destroy the cm_id here with non-zero ret code.
+		 */
+		queue->cm_id = NULL;
+		goto free_queue;
 	}
 
 	mutex_lock(&nvmet_rdma_queue_mutex);
@@ -1307,6 +1314,8 @@ static int nvmet_rdma_queue_connect(struct rdma_cm_id *cm_id,
 
 	return 0;
 
+free_queue:
+	nvmet_rdma_free_queue(queue);
 put_device:
 	kref_put(&ndev->ref, nvmet_rdma_free_dev);
 
@@ -1412,7 +1421,7 @@ static void nvmet_rdma_queue_connect_fail(struct rdma_cm_id *cm_id,
 static int nvmet_rdma_device_removal(struct rdma_cm_id *cm_id,
 		struct nvmet_rdma_queue *queue)
 {
-	struct nvmet_port *port;
+	struct nvmet_rdma_port *port;
 
 	if (queue) {
 		/*
@@ -1431,7 +1440,7 @@ static int nvmet_rdma_device_removal(struct rdma_cm_id *cm_id,
 	 * cm_id destroy. use atomic xchg to make sure
 	 * we don't compete with remove_port.
 	 */
-	if (xchg(&port->priv, NULL) != cm_id)
+	if (xchg(&port->cm_id, NULL) != cm_id)
 		return 0;
 
 	/*
@@ -1462,6 +1471,13 @@ static int nvmet_rdma_cm_handler(struct rdma_cm_id *cm_id,
 		nvmet_rdma_queue_established(queue);
 		break;
 	case RDMA_CM_EVENT_ADDR_CHANGE:
+		if (!queue) {
+			struct nvmet_rdma_port *port = cm_id->context;
+
+			schedule_delayed_work(&port->repair_work, 0);
+			break;
+		}
+		/* FALLTHROUGH */
 	case RDMA_CM_EVENT_DISCONNECTED:
 	case RDMA_CM_EVENT_TIMEWAIT_EXIT:
 		nvmet_rdma_queue_disconnect(queue);
@@ -1504,43 +1520,20 @@ static void nvmet_rdma_delete_ctrl(struct nvmet_ctrl *ctrl)
 	mutex_unlock(&nvmet_rdma_queue_mutex);
 }
 
-static int nvmet_rdma_add_port(struct nvmet_port *port)
+static void nvmet_rdma_disable_port(struct nvmet_rdma_port *port)
 {
+	struct rdma_cm_id *cm_id = xchg(&port->cm_id, NULL);
+
+	if (cm_id)
+		rdma_destroy_id(cm_id);
+}
+
+static int nvmet_rdma_enable_port(struct nvmet_rdma_port *port)
+{
+	struct sockaddr *addr = (struct sockaddr *)&port->addr;
 	struct rdma_cm_id *cm_id;
-	struct sockaddr_storage addr = { };
-	__kernel_sa_family_t af;
 	int ret;
 
-	switch (port->disc_addr.adrfam) {
-	case NVMF_ADDR_FAMILY_IP4:
-		af = AF_INET;
-		break;
-	case NVMF_ADDR_FAMILY_IP6:
-		af = AF_INET6;
-		break;
-	default:
-		pr_err("address family %d not supported\n",
-				port->disc_addr.adrfam);
-		return -EINVAL;
-	}
-
-	if (port->inline_data_size < 0) {
-		port->inline_data_size = NVMET_RDMA_DEFAULT_INLINE_DATA_SIZE;
-	} else if (port->inline_data_size > NVMET_RDMA_MAX_INLINE_DATA_SIZE) {
-		pr_warn("inline_data_size %u is too large, reducing to %u\n",
-			port->inline_data_size,
-			NVMET_RDMA_MAX_INLINE_DATA_SIZE);
-		port->inline_data_size = NVMET_RDMA_MAX_INLINE_DATA_SIZE;
-	}
-
-	ret = inet_pton_with_scope(&init_net, af, port->disc_addr.traddr,
-			port->disc_addr.trsvcid, &addr);
-	if (ret) {
-		pr_err("malformed ip/port passed: %s:%s\n",
-			port->disc_addr.traddr, port->disc_addr.trsvcid);
-		return ret;
-	}
-
 	cm_id = rdma_create_id(&init_net, nvmet_rdma_cm_handler, port,
 			RDMA_PS_TCP, IB_QPT_RC);
 	if (IS_ERR(cm_id)) {
@@ -1558,23 +1551,19 @@ static int nvmet_rdma_add_port(struct nvmet_port *port)
 		goto out_destroy_id;
 	}
 
-	ret = rdma_bind_addr(cm_id, (struct sockaddr *)&addr);
+	ret = rdma_bind_addr(cm_id, addr);
 	if (ret) {
-		pr_err("binding CM ID to %pISpcs failed (%d)\n",
-			(struct sockaddr *)&addr, ret);
+		pr_err("binding CM ID to %pISpcs failed (%d)\n", addr, ret);
 		goto out_destroy_id;
 	}
 
 	ret = rdma_listen(cm_id, 128);
 	if (ret) {
-		pr_err("listening to %pISpcs failed (%d)\n",
-			(struct sockaddr *)&addr, ret);
+		pr_err("listening to %pISpcs failed (%d)\n", addr, ret);
 		goto out_destroy_id;
 	}
 
-	pr_info("enabling port %d (%pISpcs)\n",
-		le16_to_cpu(port->disc_addr.portid), (struct sockaddr *)&addr);
-	port->priv = cm_id;
+	port->cm_id = cm_id;
 	return 0;
 
 out_destroy_id:
@@ -1582,18 +1571,92 @@ static int nvmet_rdma_add_port(struct nvmet_port *port)
 	return ret;
 }
 
-static void nvmet_rdma_remove_port(struct nvmet_port *port)
+static void nvmet_rdma_repair_port_work(struct work_struct *w)
 {
-	struct rdma_cm_id *cm_id = xchg(&port->priv, NULL);
+	struct nvmet_rdma_port *port = container_of(to_delayed_work(w),
+			struct nvmet_rdma_port, repair_work);
+	int ret;
 
-	if (cm_id)
-		rdma_destroy_id(cm_id);
+	nvmet_rdma_disable_port(port);
+	ret = nvmet_rdma_enable_port(port);
+	if (ret)
+		schedule_delayed_work(&port->repair_work, 5 * HZ);
+}
+
+static int nvmet_rdma_add_port(struct nvmet_port *nport)
+{
+	struct nvmet_rdma_port *port;
+	__kernel_sa_family_t af;
+	int ret;
+
+	port = kzalloc(sizeof(*port), GFP_KERNEL);
+	if (!port)
+		return -ENOMEM;
+
+	nport->priv = port;
+	port->nport = nport;
+	INIT_DELAYED_WORK(&port->repair_work, nvmet_rdma_repair_port_work);
+
+	switch (nport->disc_addr.adrfam) {
+	case NVMF_ADDR_FAMILY_IP4:
+		af = AF_INET;
+		break;
+	case NVMF_ADDR_FAMILY_IP6:
+		af = AF_INET6;
+		break;
+	default:
+		pr_err("address family %d not supported\n",
+			nport->disc_addr.adrfam);
+		ret = -EINVAL;
+		goto out_free_port;
+	}
+
+	if (nport->inline_data_size < 0) {
+		nport->inline_data_size = NVMET_RDMA_DEFAULT_INLINE_DATA_SIZE;
+	} else if (nport->inline_data_size > NVMET_RDMA_MAX_INLINE_DATA_SIZE) {
+		pr_warn("inline_data_size %u is too large, reducing to %u\n",
+			nport->inline_data_size,
+			NVMET_RDMA_MAX_INLINE_DATA_SIZE);
+		nport->inline_data_size = NVMET_RDMA_MAX_INLINE_DATA_SIZE;
+	}
+
+	ret = inet_pton_with_scope(&init_net, af, nport->disc_addr.traddr,
+			nport->disc_addr.trsvcid, &port->addr);
+	if (ret) {
+		pr_err("malformed ip/port passed: %s:%s\n",
+			nport->disc_addr.traddr, nport->disc_addr.trsvcid);
+		goto out_free_port;
+	}
+
+	ret = nvmet_rdma_enable_port(port);
+	if (ret)
+		goto out_free_port;
+
+	pr_info("enabling port %d (%pISpcs)\n",
+		le16_to_cpu(nport->disc_addr.portid),
+		(struct sockaddr *)&port->addr);
+
+	return 0;
+
+out_free_port:
+	kfree(port);
+	return ret;
+}
+
+static void nvmet_rdma_remove_port(struct nvmet_port *nport)
+{
+	struct nvmet_rdma_port *port = nport->priv;
+
+	cancel_delayed_work_sync(&port->repair_work);
+	nvmet_rdma_disable_port(port);
+	kfree(port);
 }
 
 static void nvmet_rdma_disc_port_addr(struct nvmet_req *req,
-		struct nvmet_port *port, char *traddr)
+		struct nvmet_port *nport, char *traddr)
 {
-	struct rdma_cm_id *cm_id = port->priv;
+	struct nvmet_rdma_port *port = nport->priv;
+	struct rdma_cm_id *cm_id = port->cm_id;
 
 	if (inet_addr_is_any((struct sockaddr *)&cm_id->route.addr.src_addr)) {
 		struct nvmet_rdma_rsp *rsp =
@@ -1603,7 +1666,7 @@ static void nvmet_rdma_disc_port_addr(struct nvmet_req *req,
 
 		sprintf(traddr, "%pISc", addr);
 	} else {
-		memcpy(traddr, port->disc_addr.traddr, NVMF_TRADDR_SIZE);
+		memcpy(traddr, nport->disc_addr.traddr, NVMF_TRADDR_SIZE);
 	}
 }
 
diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
index 35efab1..d7b7f6d 100644
--- a/drivers/nvmem/Kconfig
+++ b/drivers/nvmem/Kconfig
@@ -55,6 +55,18 @@
 	  This is a driver for the SCU On-Chip OTP Controller (OCOTP)
 	  available on i.MX8 SoCs.
 
+config JZ4780_EFUSE
+	tristate "JZ4780 EFUSE Memory Support"
+	depends on MACH_INGENIC || COMPILE_TEST
+	depends on HAS_IOMEM
+	depends on OF
+	select REGMAP_MMIO
+	help
+	  Say Y here to include support for JZ4780 efuse memory found on
+	  all JZ4780 SoC based devices.
+	  To compile this driver as a module, choose M here: the module
+	  will be called nvmem_jz4780_efuse.
+
 config NVMEM_LPC18XX_EEPROM
 	tristate "NXP LPC18XX EEPROM Memory Support"
 	depends on ARCH_LPC18XX || COMPILE_TEST
diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile
index 6b466cd..a7c3772 100644
--- a/drivers/nvmem/Makefile
+++ b/drivers/nvmem/Makefile
@@ -6,9 +6,6 @@
 obj-$(CONFIG_NVMEM)		+= nvmem_core.o
 nvmem_core-y			:= core.o
 
-obj-$(CONFIG_NVMEM_SYSFS)	+= nvmem_sysfs.o
-nvmem_sysfs-y			:= nvmem-sysfs.o
-
 # Devices
 obj-$(CONFIG_NVMEM_BCM_OCOTP)	+= nvmem-bcm-ocotp.o
 nvmem-bcm-ocotp-y		:= bcm-ocotp.o
@@ -18,6 +15,8 @@
 nvmem-imx-ocotp-y		:= imx-ocotp.o
 obj-$(CONFIG_NVMEM_IMX_OCOTP_SCU)	+= nvmem-imx-ocotp-scu.o
 nvmem-imx-ocotp-scu-y		:= imx-ocotp-scu.o
+obj-$(CONFIG_JZ4780_EFUSE)		+= nvmem_jz4780_efuse.o
+nvmem_jz4780_efuse-y		:= jz4780-efuse.o
 obj-$(CONFIG_NVMEM_LPC18XX_EEPROM)	+= nvmem_lpc18xx_eeprom.o
 nvmem_lpc18xx_eeprom-y	:= lpc18xx_eeprom.o
 obj-$(CONFIG_NVMEM_LPC18XX_OTP)	+= nvmem_lpc18xx_otp.o
diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c
index ef326f2..05c6ae4 100644
--- a/drivers/nvmem/core.c
+++ b/drivers/nvmem/core.c
@@ -18,7 +18,31 @@
 #include <linux/gpio/consumer.h>
 #include <linux/of.h>
 #include <linux/slab.h>
-#include "nvmem.h"
+
+struct nvmem_device {
+	struct module		*owner;
+	struct device		dev;
+	int			stride;
+	int			word_size;
+	int			id;
+	struct kref		refcnt;
+	size_t			size;
+	bool			read_only;
+	bool			root_only;
+	int			flags;
+	enum nvmem_type		type;
+	struct bin_attribute	eeprom;
+	struct device		*base_dev;
+	struct list_head	cells;
+	nvmem_reg_read_t	reg_read;
+	nvmem_reg_write_t	reg_write;
+	struct gpio_desc	*wp_gpio;
+	void *priv;
+};
+
+#define to_nvmem_device(d) container_of(d, struct nvmem_device, dev)
+
+#define FLAG_COMPAT		BIT(0)
 
 struct nvmem_cell {
 	const char		*name;
@@ -42,6 +66,250 @@ static LIST_HEAD(nvmem_lookup_list);
 
 static BLOCKING_NOTIFIER_HEAD(nvmem_notifier);
 
+#ifdef CONFIG_NVMEM_SYSFS
+static const char * const nvmem_type_str[] = {
+	[NVMEM_TYPE_UNKNOWN] = "Unknown",
+	[NVMEM_TYPE_EEPROM] = "EEPROM",
+	[NVMEM_TYPE_OTP] = "OTP",
+	[NVMEM_TYPE_BATTERY_BACKED] = "Battery backed",
+};
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+static struct lock_class_key eeprom_lock_key;
+#endif
+
+static ssize_t type_show(struct device *dev,
+			 struct device_attribute *attr, char *buf)
+{
+	struct nvmem_device *nvmem = to_nvmem_device(dev);
+
+	return sprintf(buf, "%s\n", nvmem_type_str[nvmem->type]);
+}
+
+static DEVICE_ATTR_RO(type);
+
+static struct attribute *nvmem_attrs[] = {
+	&dev_attr_type.attr,
+	NULL,
+};
+
+static ssize_t bin_attr_nvmem_read(struct file *filp, struct kobject *kobj,
+				   struct bin_attribute *attr, char *buf,
+				   loff_t pos, size_t count)
+{
+	struct device *dev;
+	struct nvmem_device *nvmem;
+	int rc;
+
+	if (attr->private)
+		dev = attr->private;
+	else
+		dev = container_of(kobj, struct device, kobj);
+	nvmem = to_nvmem_device(dev);
+
+	/* Stop the user from reading */
+	if (pos >= nvmem->size)
+		return 0;
+
+	if (count < nvmem->word_size)
+		return -EINVAL;
+
+	if (pos + count > nvmem->size)
+		count = nvmem->size - pos;
+
+	count = round_down(count, nvmem->word_size);
+
+	if (!nvmem->reg_read)
+		return -EPERM;
+
+	rc = nvmem->reg_read(nvmem->priv, pos, buf, count);
+
+	if (rc)
+		return rc;
+
+	return count;
+}
+
+static ssize_t bin_attr_nvmem_write(struct file *filp, struct kobject *kobj,
+				    struct bin_attribute *attr, char *buf,
+				    loff_t pos, size_t count)
+{
+	struct device *dev;
+	struct nvmem_device *nvmem;
+	int rc;
+
+	if (attr->private)
+		dev = attr->private;
+	else
+		dev = container_of(kobj, struct device, kobj);
+	nvmem = to_nvmem_device(dev);
+
+	/* Stop the user from writing */
+	if (pos >= nvmem->size)
+		return -EFBIG;
+
+	if (count < nvmem->word_size)
+		return -EINVAL;
+
+	if (pos + count > nvmem->size)
+		count = nvmem->size - pos;
+
+	count = round_down(count, nvmem->word_size);
+
+	if (!nvmem->reg_write)
+		return -EPERM;
+
+	rc = nvmem->reg_write(nvmem->priv, pos, buf, count);
+
+	if (rc)
+		return rc;
+
+	return count;
+}
+
+static umode_t nvmem_bin_attr_is_visible(struct kobject *kobj,
+					 struct bin_attribute *attr, int i)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct nvmem_device *nvmem = to_nvmem_device(dev);
+	umode_t mode = 0400;
+
+	if (!nvmem->root_only)
+		mode |= 0044;
+
+	if (!nvmem->read_only)
+		mode |= 0200;
+
+	if (!nvmem->reg_write)
+		mode &= ~0200;
+
+	if (!nvmem->reg_read)
+		mode &= ~0444;
+
+	return mode;
+}
+
+/* default read/write permissions */
+static struct bin_attribute bin_attr_rw_nvmem = {
+	.attr	= {
+		.name	= "nvmem",
+		.mode	= 0644,
+	},
+	.read	= bin_attr_nvmem_read,
+	.write	= bin_attr_nvmem_write,
+};
+
+static struct bin_attribute *nvmem_bin_attributes[] = {
+	&bin_attr_rw_nvmem,
+	NULL,
+};
+
+static const struct attribute_group nvmem_bin_group = {
+	.bin_attrs	= nvmem_bin_attributes,
+	.attrs		= nvmem_attrs,
+	.is_bin_visible = nvmem_bin_attr_is_visible,
+};
+
+static const struct attribute_group *nvmem_dev_groups[] = {
+	&nvmem_bin_group,
+	NULL,
+};
+
+/* read only permission */
+static struct bin_attribute bin_attr_ro_nvmem = {
+	.attr	= {
+		.name	= "nvmem",
+		.mode	= 0444,
+	},
+	.read	= bin_attr_nvmem_read,
+};
+
+/* default read/write permissions, root only */
+static struct bin_attribute bin_attr_rw_root_nvmem = {
+	.attr	= {
+		.name	= "nvmem",
+		.mode	= 0600,
+	},
+	.read	= bin_attr_nvmem_read,
+	.write	= bin_attr_nvmem_write,
+};
+
+/* read only permission, root only */
+static struct bin_attribute bin_attr_ro_root_nvmem = {
+	.attr	= {
+		.name	= "nvmem",
+		.mode	= 0400,
+	},
+	.read	= bin_attr_nvmem_read,
+};
+
+/*
+ * nvmem_setup_compat() - Create an additional binary entry in
+ * drivers sys directory, to be backwards compatible with the older
+ * drivers/misc/eeprom drivers.
+ */
+static int nvmem_sysfs_setup_compat(struct nvmem_device *nvmem,
+				    const struct nvmem_config *config)
+{
+	int rval;
+
+	if (!config->compat)
+		return 0;
+
+	if (!config->base_dev)
+		return -EINVAL;
+
+	if (nvmem->read_only) {
+		if (config->root_only)
+			nvmem->eeprom = bin_attr_ro_root_nvmem;
+		else
+			nvmem->eeprom = bin_attr_ro_nvmem;
+	} else {
+		if (config->root_only)
+			nvmem->eeprom = bin_attr_rw_root_nvmem;
+		else
+			nvmem->eeprom = bin_attr_rw_nvmem;
+	}
+	nvmem->eeprom.attr.name = "eeprom";
+	nvmem->eeprom.size = nvmem->size;
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+	nvmem->eeprom.attr.key = &eeprom_lock_key;
+#endif
+	nvmem->eeprom.private = &nvmem->dev;
+	nvmem->base_dev = config->base_dev;
+
+	rval = device_create_bin_file(nvmem->base_dev, &nvmem->eeprom);
+	if (rval) {
+		dev_err(&nvmem->dev,
+			"Failed to create eeprom binary file %d\n", rval);
+		return rval;
+	}
+
+	nvmem->flags |= FLAG_COMPAT;
+
+	return 0;
+}
+
+static void nvmem_sysfs_remove_compat(struct nvmem_device *nvmem,
+			      const struct nvmem_config *config)
+{
+	if (config->compat)
+		device_remove_bin_file(nvmem->base_dev, &nvmem->eeprom);
+}
+
+#else /* CONFIG_NVMEM_SYSFS */
+
+static int nvmem_sysfs_setup_compat(struct nvmem_device *nvmem,
+				    const struct nvmem_config *config)
+{
+	return -ENOSYS;
+}
+static void nvmem_sysfs_remove_compat(struct nvmem_device *nvmem,
+				      const struct nvmem_config *config)
+{
+}
+
+#endif /* CONFIG_NVMEM_SYSFS */
 
 static int nvmem_reg_read(struct nvmem_device *nvmem, unsigned int offset,
 			  void *val, size_t bytes)
@@ -72,6 +340,7 @@ static void nvmem_release(struct device *dev)
 	struct nvmem_device *nvmem = to_nvmem_device(dev);
 
 	ida_simple_remove(&nvmem_ida, nvmem->id);
+	gpiod_put(nvmem->wp_gpio);
 	kfree(nvmem);
 }
 
@@ -338,6 +607,9 @@ struct nvmem_device *nvmem_register(const struct nvmem_config *config)
 	if (!config->dev)
 		return ERR_PTR(-EINVAL);
 
+	if (!config->reg_read && !config->reg_write)
+		return ERR_PTR(-EINVAL);
+
 	nvmem = kzalloc(sizeof(*nvmem), GFP_KERNEL);
 	if (!nvmem)
 		return ERR_PTR(-ENOMEM);
@@ -347,14 +619,18 @@ struct nvmem_device *nvmem_register(const struct nvmem_config *config)
 		kfree(nvmem);
 		return ERR_PTR(rval);
 	}
+
 	if (config->wp_gpio)
 		nvmem->wp_gpio = config->wp_gpio;
 	else
 		nvmem->wp_gpio = gpiod_get_optional(config->dev, "wp",
 						    GPIOD_OUT_HIGH);
-	if (IS_ERR(nvmem->wp_gpio))
-		return ERR_CAST(nvmem->wp_gpio);
-
+	if (IS_ERR(nvmem->wp_gpio)) {
+		ida_simple_remove(&nvmem_ida, nvmem->id);
+		rval = PTR_ERR(nvmem->wp_gpio);
+		kfree(nvmem);
+		return ERR_PTR(rval);
+	}
 
 	kref_init(&nvmem->refcnt);
 	INIT_LIST_HEAD(&nvmem->cells);
@@ -369,6 +645,7 @@ struct nvmem_device *nvmem_register(const struct nvmem_config *config)
 	nvmem->dev.type = &nvmem_provider_type;
 	nvmem->dev.bus = &nvmem_bus_type;
 	nvmem->dev.parent = config->dev;
+	nvmem->root_only = config->root_only;
 	nvmem->priv = config->priv;
 	nvmem->type = config->type;
 	nvmem->reg_read = config->reg_read;
@@ -387,13 +664,13 @@ struct nvmem_device *nvmem_register(const struct nvmem_config *config)
 	nvmem->read_only = device_property_present(config->dev, "read-only") ||
 			   config->read_only || !nvmem->reg_write;
 
-	nvmem->dev.groups = nvmem_sysfs_get_groups(nvmem, config);
-
-	device_initialize(&nvmem->dev);
+#ifdef CONFIG_NVMEM_SYSFS
+	nvmem->dev.groups = nvmem_dev_groups;
+#endif
 
 	dev_dbg(&nvmem->dev, "Registering nvmem device %s\n", config->name);
 
-	rval = device_add(&nvmem->dev);
+	rval = device_register(&nvmem->dev);
 	if (rval)
 		goto err_put_device;
 
@@ -447,8 +724,7 @@ static void nvmem_device_release(struct kref *kref)
 		device_remove_bin_file(nvmem->base_dev, &nvmem->eeprom);
 
 	nvmem_device_remove_all_cells(nvmem);
-	device_del(&nvmem->dev);
-	put_device(&nvmem->dev);
+	device_unregister(&nvmem->dev);
 }
 
 /**
@@ -1088,16 +1364,8 @@ int nvmem_cell_write(struct nvmem_cell *cell, void *buf, size_t len)
 }
 EXPORT_SYMBOL_GPL(nvmem_cell_write);
 
-/**
- * nvmem_cell_read_u16() - Read a cell value as an u16
- *
- * @dev: Device that requests the nvmem cell.
- * @cell_id: Name of nvmem cell to read.
- * @val: pointer to output value.
- *
- * Return: 0 on success or negative errno.
- */
-int nvmem_cell_read_u16(struct device *dev, const char *cell_id, u16 *val)
+static int nvmem_cell_read_common(struct device *dev, const char *cell_id,
+				  void *val, size_t count)
 {
 	struct nvmem_cell *cell;
 	void *buf;
@@ -1112,17 +1380,31 @@ int nvmem_cell_read_u16(struct device *dev, const char *cell_id, u16 *val)
 		nvmem_cell_put(cell);
 		return PTR_ERR(buf);
 	}
-	if (len != sizeof(*val)) {
+	if (len != count) {
 		kfree(buf);
 		nvmem_cell_put(cell);
 		return -EINVAL;
 	}
-	memcpy(val, buf, sizeof(*val));
+	memcpy(val, buf, count);
 	kfree(buf);
 	nvmem_cell_put(cell);
 
 	return 0;
 }
+
+/**
+ * nvmem_cell_read_u16() - Read a cell value as an u16
+ *
+ * @dev: Device that requests the nvmem cell.
+ * @cell_id: Name of nvmem cell to read.
+ * @val: pointer to output value.
+ *
+ * Return: 0 on success or negative errno.
+ */
+int nvmem_cell_read_u16(struct device *dev, const char *cell_id, u16 *val)
+{
+	return nvmem_cell_read_common(dev, cell_id, val, sizeof(*val));
+}
 EXPORT_SYMBOL_GPL(nvmem_cell_read_u16);
 
 /**
@@ -1136,33 +1418,26 @@ EXPORT_SYMBOL_GPL(nvmem_cell_read_u16);
  */
 int nvmem_cell_read_u32(struct device *dev, const char *cell_id, u32 *val)
 {
-	struct nvmem_cell *cell;
-	void *buf;
-	size_t len;
-
-	cell = nvmem_cell_get(dev, cell_id);
-	if (IS_ERR(cell))
-		return PTR_ERR(cell);
-
-	buf = nvmem_cell_read(cell, &len);
-	if (IS_ERR(buf)) {
-		nvmem_cell_put(cell);
-		return PTR_ERR(buf);
-	}
-	if (len != sizeof(*val)) {
-		kfree(buf);
-		nvmem_cell_put(cell);
-		return -EINVAL;
-	}
-	memcpy(val, buf, sizeof(*val));
-
-	kfree(buf);
-	nvmem_cell_put(cell);
-	return 0;
+	return nvmem_cell_read_common(dev, cell_id, val, sizeof(*val));
 }
 EXPORT_SYMBOL_GPL(nvmem_cell_read_u32);
 
 /**
+ * nvmem_cell_read_u64() - Read a cell value as an u64
+ *
+ * @dev: Device that requests the nvmem cell.
+ * @cell_id: Name of nvmem cell to read.
+ * @val: pointer to output value.
+ *
+ * Return: 0 on success or negative errno.
+ */
+int nvmem_cell_read_u64(struct device *dev, const char *cell_id, u64 *val)
+{
+	return nvmem_cell_read_common(dev, cell_id, val, sizeof(*val));
+}
+EXPORT_SYMBOL_GPL(nvmem_cell_read_u64);
+
+/**
  * nvmem_device_cell_read() - Read a given nvmem device and cell
  *
  * @nvmem: nvmem device to read from.
diff --git a/drivers/nvmem/imx-ocotp.c b/drivers/nvmem/imx-ocotp.c
index 4ba9cc8..50bea2a 100644
--- a/drivers/nvmem/imx-ocotp.c
+++ b/drivers/nvmem/imx-ocotp.c
@@ -44,6 +44,11 @@
 #define IMX_OCOTP_BM_CTRL_ERROR		0x00000200
 #define IMX_OCOTP_BM_CTRL_REL_SHADOWS	0x00000400
 
+#define IMX_OCOTP_BM_CTRL_ADDR_8MP		0x000001FF
+#define IMX_OCOTP_BM_CTRL_BUSY_8MP		0x00000200
+#define IMX_OCOTP_BM_CTRL_ERROR_8MP		0x00000400
+#define IMX_OCOTP_BM_CTRL_REL_SHADOWS_8MP	0x00000800
+
 #define IMX_OCOTP_BM_CTRL_DEFAULT				\
 	{							\
 		.bm_addr = IMX_OCOTP_BM_CTRL_ADDR,		\
@@ -52,6 +57,14 @@
 		.bm_rel_shadows = IMX_OCOTP_BM_CTRL_REL_SHADOWS,\
 	}
 
+#define IMX_OCOTP_BM_CTRL_8MP					\
+	{							\
+		.bm_addr = IMX_OCOTP_BM_CTRL_ADDR_8MP,		\
+		.bm_busy = IMX_OCOTP_BM_CTRL_BUSY_8MP,		\
+		.bm_error = IMX_OCOTP_BM_CTRL_ERROR_8MP,	\
+		.bm_rel_shadows = IMX_OCOTP_BM_CTRL_REL_SHADOWS_8MP,\
+	}
+
 #define TIMING_STROBE_PROG_US		10	/* Min time to blow a fuse */
 #define TIMING_STROBE_READ_NS		37	/* Min time before read */
 #define TIMING_RELAX_NS			17
@@ -193,9 +206,9 @@ static int imx_ocotp_read(void *context, unsigned int offset,
 
 static void imx_ocotp_set_imx6_timing(struct ocotp_priv *priv)
 {
-	unsigned long clk_rate = 0;
+	unsigned long clk_rate;
 	unsigned long strobe_read, relax, strobe_prog;
-	u32 timing = 0;
+	u32 timing;
 
 	/* 47.3.1.3.1
 	 * Program HW_OCOTP_TIMING[STROBE_PROG] and HW_OCOTP_TIMING[RELAX]
@@ -245,9 +258,9 @@ static void imx_ocotp_set_imx6_timing(struct ocotp_priv *priv)
 
 static void imx_ocotp_set_imx7_timing(struct ocotp_priv *priv)
 {
-	unsigned long clk_rate = 0;
+	unsigned long clk_rate;
 	u64 fsource, strobe_prog;
-	u32 timing = 0;
+	u32 timing;
 
 	/* i.MX 7Solo Applications Processor Reference Manual, Rev. 0.1
 	 * 6.4.3.3
@@ -520,6 +533,13 @@ static const struct ocotp_params imx8mn_params = {
 	.ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
 };
 
+static const struct ocotp_params imx8mp_params = {
+	.nregs = 384,
+	.bank_address_words = 0,
+	.set_timing = imx_ocotp_set_imx6_timing,
+	.ctrl = IMX_OCOTP_BM_CTRL_8MP,
+};
+
 static const struct of_device_id imx_ocotp_dt_ids[] = {
 	{ .compatible = "fsl,imx6q-ocotp",  .data = &imx6q_params },
 	{ .compatible = "fsl,imx6sl-ocotp", .data = &imx6sl_params },
@@ -532,6 +552,7 @@ static const struct of_device_id imx_ocotp_dt_ids[] = {
 	{ .compatible = "fsl,imx8mq-ocotp", .data = &imx8mq_params },
 	{ .compatible = "fsl,imx8mm-ocotp", .data = &imx8mm_params },
 	{ .compatible = "fsl,imx8mn-ocotp", .data = &imx8mn_params },
+	{ .compatible = "fsl,imx8mp-ocotp", .data = &imx8mp_params },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, imx_ocotp_dt_ids);
diff --git a/drivers/nvmem/jz4780-efuse.c b/drivers/nvmem/jz4780-efuse.c
new file mode 100644
index 0000000..512e187
--- /dev/null
+++ b/drivers/nvmem/jz4780-efuse.c
@@ -0,0 +1,239 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * JZ4780 EFUSE Memory Support driver
+ *
+ * Copyright (c) 2017 PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
+ * Copyright (c) 2020 H. Nikolaus Schaller <hns@goldelico.com>
+ */
+
+/*
+ * Currently supports JZ4780 efuse which has 8K programmable bit.
+ * Efuse is separated into seven segments as below:
+ *
+ * -----------------------------------------------------------------------
+ * | 64 bit | 128 bit | 128 bit | 3520 bit | 8 bit | 2296 bit | 2048 bit |
+ * -----------------------------------------------------------------------
+ *
+ * The rom itself is accessed using a 9 bit address line and an 8 word wide bus
+ * which reads/writes based on strobes. The strobe is configured in the config
+ * register and is based on number of cycles of the bus clock.
+ *
+ * Driver supports read only as the writes are done in the Factory.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/timer.h>
+
+#define JZ_EFUCTRL		(0x0)	/* Control Register */
+#define JZ_EFUCFG		(0x4)	/* Configure Register*/
+#define JZ_EFUSTATE		(0x8)	/* Status Register */
+#define JZ_EFUDATA(n)		(0xC + (n) * 4)
+
+/* We read 32 byte chunks to avoid complexity in the driver. */
+#define JZ_EFU_READ_SIZE 32
+
+#define EFUCTRL_ADDR_MASK	0x3FF
+#define EFUCTRL_ADDR_SHIFT	21
+#define EFUCTRL_LEN_MASK	0x1F
+#define EFUCTRL_LEN_SHIFT	16
+#define EFUCTRL_PG_EN		BIT(15)
+#define EFUCTRL_WR_EN		BIT(1)
+#define EFUCTRL_RD_EN		BIT(0)
+
+#define EFUCFG_INT_EN		BIT(31)
+#define EFUCFG_RD_ADJ_MASK	0xF
+#define EFUCFG_RD_ADJ_SHIFT	20
+#define EFUCFG_RD_STR_MASK	0xF
+#define EFUCFG_RD_STR_SHIFT	16
+#define EFUCFG_WR_ADJ_MASK	0xF
+#define EFUCFG_WR_ADJ_SHIFT	12
+#define EFUCFG_WR_STR_MASK	0xFFF
+#define EFUCFG_WR_STR_SHIFT	0
+
+#define EFUSTATE_WR_DONE	BIT(1)
+#define EFUSTATE_RD_DONE	BIT(0)
+
+struct jz4780_efuse {
+	struct device *dev;
+	struct regmap *map;
+	struct clk *clk;
+};
+
+/* main entry point */
+static int jz4780_efuse_read(void *context, unsigned int offset,
+			     void *val, size_t bytes)
+{
+	struct jz4780_efuse *efuse = context;
+
+	while (bytes > 0) {
+		size_t start = offset & ~(JZ_EFU_READ_SIZE - 1);
+		size_t chunk = min(bytes, (start + JZ_EFU_READ_SIZE)
+				    - offset);
+		char buf[JZ_EFU_READ_SIZE];
+		unsigned int tmp;
+		u32 ctrl;
+		int ret;
+
+		ctrl = (start << EFUCTRL_ADDR_SHIFT)
+			| ((JZ_EFU_READ_SIZE - 1) << EFUCTRL_LEN_SHIFT)
+			| EFUCTRL_RD_EN;
+
+		regmap_update_bits(efuse->map, JZ_EFUCTRL,
+				   (EFUCTRL_ADDR_MASK << EFUCTRL_ADDR_SHIFT) |
+				   (EFUCTRL_LEN_MASK << EFUCTRL_LEN_SHIFT) |
+				   EFUCTRL_PG_EN | EFUCTRL_WR_EN |
+				   EFUCTRL_RD_EN,
+				   ctrl);
+
+		ret = regmap_read_poll_timeout(efuse->map, JZ_EFUSTATE,
+					       tmp, tmp & EFUSTATE_RD_DONE,
+					       1 * MSEC_PER_SEC,
+					       50 * MSEC_PER_SEC);
+		if (ret < 0) {
+			dev_err(efuse->dev, "Time out while reading efuse data");
+			return ret;
+		}
+
+		ret = regmap_bulk_read(efuse->map, JZ_EFUDATA(0),
+				       buf, JZ_EFU_READ_SIZE / sizeof(u32));
+		if (ret < 0)
+			return ret;
+
+		memcpy(val, &buf[offset - start], chunk);
+
+		val += chunk;
+		offset += chunk;
+		bytes -= chunk;
+	}
+
+	return 0;
+}
+
+static struct nvmem_config jz4780_efuse_nvmem_config = {
+	.name = "jz4780-efuse",
+	.size = 1024,
+	.word_size = 1,
+	.stride = 1,
+	.owner = THIS_MODULE,
+	.reg_read = jz4780_efuse_read,
+};
+
+static const struct regmap_config jz4780_efuse_regmap_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = JZ_EFUDATA(7),
+};
+
+static void clk_disable_unprepare_helper(void *clock)
+{
+	clk_disable_unprepare(clock);
+}
+
+static int jz4780_efuse_probe(struct platform_device *pdev)
+{
+	struct nvmem_device *nvmem;
+	struct jz4780_efuse *efuse;
+	struct nvmem_config cfg;
+	unsigned long clk_rate;
+	unsigned long rd_adj;
+	unsigned long rd_strobe;
+	struct device *dev = &pdev->dev;
+	void __iomem *regs;
+	int ret;
+
+	efuse = devm_kzalloc(dev, sizeof(*efuse), GFP_KERNEL);
+	if (!efuse)
+		return -ENOMEM;
+
+	regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(regs))
+		return PTR_ERR(regs);
+
+	efuse->map = devm_regmap_init_mmio(dev, regs,
+					   &jz4780_efuse_regmap_config);
+	if (IS_ERR(efuse->map))
+		return PTR_ERR(efuse->map);
+
+	efuse->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(efuse->clk))
+		return PTR_ERR(efuse->clk);
+
+	ret = clk_prepare_enable(efuse->clk);
+	if (ret < 0)
+		return ret;
+
+	ret = devm_add_action_or_reset(&pdev->dev,
+				       clk_disable_unprepare_helper,
+				       efuse->clk);
+	if (ret < 0)
+		return ret;
+
+	clk_rate = clk_get_rate(efuse->clk);
+
+	efuse->dev = dev;
+
+	/*
+	 * rd_adj and rd_strobe are 4 bit values
+	 * conditions:
+	 *   bus clk_period * (rd_adj + 1) > 6.5ns
+	 *   bus clk_period * (rd_adj + 5 + rd_strobe) > 35ns
+	 *   i.e. rd_adj >= 6.5ns / clk_period
+	 *   i.e. rd_strobe >= 35 ns / clk_period - 5 - rd_adj + 1
+	 * constants:
+	 *   1 / 6.5ns == 153846154 Hz
+	 *   1 / 35ns == 28571429 Hz
+	 */
+
+	rd_adj = clk_rate / 153846154;
+	rd_strobe = clk_rate / 28571429 - 5 - rd_adj + 1;
+
+	if (rd_adj > EFUCFG_RD_ADJ_MASK ||
+	    rd_strobe > EFUCFG_RD_STR_MASK) {
+		dev_err(&pdev->dev, "Cannot set clock configuration\n");
+		return -EINVAL;
+	}
+
+	regmap_update_bits(efuse->map, JZ_EFUCFG,
+			   (EFUCFG_RD_ADJ_MASK << EFUCFG_RD_ADJ_SHIFT) |
+			   (EFUCFG_RD_STR_MASK << EFUCFG_RD_STR_SHIFT),
+			   (rd_adj << EFUCFG_RD_ADJ_SHIFT) |
+			   (rd_strobe << EFUCFG_RD_STR_SHIFT));
+
+	cfg = jz4780_efuse_nvmem_config;
+	cfg.dev = &pdev->dev;
+	cfg.priv = efuse;
+
+	nvmem = devm_nvmem_register(dev, &cfg);
+	if (IS_ERR(nvmem))
+		return PTR_ERR(nvmem);
+
+	return 0;
+}
+
+static const struct of_device_id jz4780_efuse_match[] = {
+	{ .compatible = "ingenic,jz4780-efuse" },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, jz4780_efuse_match);
+
+static struct platform_driver jz4780_efuse_driver = {
+	.probe  = jz4780_efuse_probe,
+	.driver = {
+		.name = "jz4780-efuse",
+		.of_match_table = jz4780_efuse_match,
+	},
+};
+module_platform_driver(jz4780_efuse_driver);
+
+MODULE_AUTHOR("PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>");
+MODULE_AUTHOR("H. Nikolaus Schaller <hns@goldelico.com>");
+MODULE_AUTHOR("Paul Cercueil <paul@crapouillou.net>");
+MODULE_DESCRIPTION("Ingenic JZ4780 efuse driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/mxs-ocotp.c b/drivers/nvmem/mxs-ocotp.c
index 8e4898d..588ab56 100644
--- a/drivers/nvmem/mxs-ocotp.c
+++ b/drivers/nvmem/mxs-ocotp.c
@@ -130,6 +130,11 @@ static const struct of_device_id mxs_ocotp_match[] = {
 };
 MODULE_DEVICE_TABLE(of, mxs_ocotp_match);
 
+static void mxs_ocotp_action(void *data)
+{
+	clk_unprepare(data);
+}
+
 static int mxs_ocotp_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -160,39 +165,26 @@ static int mxs_ocotp_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	ret = devm_add_action_or_reset(&pdev->dev, mxs_ocotp_action, otp->clk);
+	if (ret)
+		return ret;
+
 	data = match->data;
 
 	ocotp_config.size = data->size;
 	ocotp_config.priv = otp;
 	ocotp_config.dev = dev;
 	otp->nvmem = devm_nvmem_register(dev, &ocotp_config);
-	if (IS_ERR(otp->nvmem)) {
-		ret = PTR_ERR(otp->nvmem);
-		goto err_clk;
-	}
+	if (IS_ERR(otp->nvmem))
+		return PTR_ERR(otp->nvmem);
 
 	platform_set_drvdata(pdev, otp);
 
 	return 0;
-
-err_clk:
-	clk_unprepare(otp->clk);
-
-	return ret;
-}
-
-static int mxs_ocotp_remove(struct platform_device *pdev)
-{
-	struct mxs_ocotp *otp = platform_get_drvdata(pdev);
-
-	clk_unprepare(otp->clk);
-
-	return 0;
 }
 
 static struct platform_driver mxs_ocotp_driver = {
 	.probe = mxs_ocotp_probe,
-	.remove = mxs_ocotp_remove,
 	.driver = {
 		.name = "mxs-ocotp",
 		.of_match_table = mxs_ocotp_match,
diff --git a/drivers/nvmem/nvmem-sysfs.c b/drivers/nvmem/nvmem-sysfs.c
deleted file mode 100644
index 9e0c429..0000000
--- a/drivers/nvmem/nvmem-sysfs.c
+++ /dev/null
@@ -1,263 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2019, Linaro Limited
- */
-#include "nvmem.h"
-
-static const char * const nvmem_type_str[] = {
-	[NVMEM_TYPE_UNKNOWN] = "Unknown",
-	[NVMEM_TYPE_EEPROM] = "EEPROM",
-	[NVMEM_TYPE_OTP] = "OTP",
-	[NVMEM_TYPE_BATTERY_BACKED] = "Battery backed",
-};
-
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-static struct lock_class_key eeprom_lock_key;
-#endif
-
-static ssize_t type_show(struct device *dev,
-			 struct device_attribute *attr, char *buf)
-{
-	struct nvmem_device *nvmem = to_nvmem_device(dev);
-
-	return sprintf(buf, "%s\n", nvmem_type_str[nvmem->type]);
-}
-
-static DEVICE_ATTR_RO(type);
-
-static struct attribute *nvmem_attrs[] = {
-	&dev_attr_type.attr,
-	NULL,
-};
-
-static ssize_t bin_attr_nvmem_read(struct file *filp, struct kobject *kobj,
-				    struct bin_attribute *attr,
-				    char *buf, loff_t pos, size_t count)
-{
-	struct device *dev;
-	struct nvmem_device *nvmem;
-	int rc;
-
-	if (attr->private)
-		dev = attr->private;
-	else
-		dev = container_of(kobj, struct device, kobj);
-	nvmem = to_nvmem_device(dev);
-
-	/* Stop the user from reading */
-	if (pos >= nvmem->size)
-		return 0;
-
-	if (count < nvmem->word_size)
-		return -EINVAL;
-
-	if (pos + count > nvmem->size)
-		count = nvmem->size - pos;
-
-	count = round_down(count, nvmem->word_size);
-
-	rc = nvmem->reg_read(nvmem->priv, pos, buf, count);
-
-	if (rc)
-		return rc;
-
-	return count;
-}
-
-static ssize_t bin_attr_nvmem_write(struct file *filp, struct kobject *kobj,
-				     struct bin_attribute *attr,
-				     char *buf, loff_t pos, size_t count)
-{
-	struct device *dev;
-	struct nvmem_device *nvmem;
-	int rc;
-
-	if (attr->private)
-		dev = attr->private;
-	else
-		dev = container_of(kobj, struct device, kobj);
-	nvmem = to_nvmem_device(dev);
-
-	/* Stop the user from writing */
-	if (pos >= nvmem->size)
-		return -EFBIG;
-
-	if (count < nvmem->word_size)
-		return -EINVAL;
-
-	if (pos + count > nvmem->size)
-		count = nvmem->size - pos;
-
-	count = round_down(count, nvmem->word_size);
-
-	rc = nvmem->reg_write(nvmem->priv, pos, buf, count);
-
-	if (rc)
-		return rc;
-
-	return count;
-}
-
-/* default read/write permissions */
-static struct bin_attribute bin_attr_rw_nvmem = {
-	.attr	= {
-		.name	= "nvmem",
-		.mode	= 0644,
-	},
-	.read	= bin_attr_nvmem_read,
-	.write	= bin_attr_nvmem_write,
-};
-
-static struct bin_attribute *nvmem_bin_rw_attributes[] = {
-	&bin_attr_rw_nvmem,
-	NULL,
-};
-
-static const struct attribute_group nvmem_bin_rw_group = {
-	.bin_attrs	= nvmem_bin_rw_attributes,
-	.attrs		= nvmem_attrs,
-};
-
-static const struct attribute_group *nvmem_rw_dev_groups[] = {
-	&nvmem_bin_rw_group,
-	NULL,
-};
-
-/* read only permission */
-static struct bin_attribute bin_attr_ro_nvmem = {
-	.attr	= {
-		.name	= "nvmem",
-		.mode	= 0444,
-	},
-	.read	= bin_attr_nvmem_read,
-};
-
-static struct bin_attribute *nvmem_bin_ro_attributes[] = {
-	&bin_attr_ro_nvmem,
-	NULL,
-};
-
-static const struct attribute_group nvmem_bin_ro_group = {
-	.bin_attrs	= nvmem_bin_ro_attributes,
-	.attrs		= nvmem_attrs,
-};
-
-static const struct attribute_group *nvmem_ro_dev_groups[] = {
-	&nvmem_bin_ro_group,
-	NULL,
-};
-
-/* default read/write permissions, root only */
-static struct bin_attribute bin_attr_rw_root_nvmem = {
-	.attr	= {
-		.name	= "nvmem",
-		.mode	= 0600,
-	},
-	.read	= bin_attr_nvmem_read,
-	.write	= bin_attr_nvmem_write,
-};
-
-static struct bin_attribute *nvmem_bin_rw_root_attributes[] = {
-	&bin_attr_rw_root_nvmem,
-	NULL,
-};
-
-static const struct attribute_group nvmem_bin_rw_root_group = {
-	.bin_attrs	= nvmem_bin_rw_root_attributes,
-	.attrs		= nvmem_attrs,
-};
-
-static const struct attribute_group *nvmem_rw_root_dev_groups[] = {
-	&nvmem_bin_rw_root_group,
-	NULL,
-};
-
-/* read only permission, root only */
-static struct bin_attribute bin_attr_ro_root_nvmem = {
-	.attr	= {
-		.name	= "nvmem",
-		.mode	= 0400,
-	},
-	.read	= bin_attr_nvmem_read,
-};
-
-static struct bin_attribute *nvmem_bin_ro_root_attributes[] = {
-	&bin_attr_ro_root_nvmem,
-	NULL,
-};
-
-static const struct attribute_group nvmem_bin_ro_root_group = {
-	.bin_attrs	= nvmem_bin_ro_root_attributes,
-	.attrs		= nvmem_attrs,
-};
-
-static const struct attribute_group *nvmem_ro_root_dev_groups[] = {
-	&nvmem_bin_ro_root_group,
-	NULL,
-};
-
-const struct attribute_group **nvmem_sysfs_get_groups(
-					struct nvmem_device *nvmem,
-					const struct nvmem_config *config)
-{
-	if (config->root_only)
-		return nvmem->read_only ?
-			nvmem_ro_root_dev_groups :
-			nvmem_rw_root_dev_groups;
-
-	return nvmem->read_only ? nvmem_ro_dev_groups : nvmem_rw_dev_groups;
-}
-
-/*
- * nvmem_setup_compat() - Create an additional binary entry in
- * drivers sys directory, to be backwards compatible with the older
- * drivers/misc/eeprom drivers.
- */
-int nvmem_sysfs_setup_compat(struct nvmem_device *nvmem,
-			      const struct nvmem_config *config)
-{
-	int rval;
-
-	if (!config->compat)
-		return 0;
-
-	if (!config->base_dev)
-		return -EINVAL;
-
-	if (nvmem->read_only) {
-		if (config->root_only)
-			nvmem->eeprom = bin_attr_ro_root_nvmem;
-		else
-			nvmem->eeprom = bin_attr_ro_nvmem;
-	} else {
-		if (config->root_only)
-			nvmem->eeprom = bin_attr_rw_root_nvmem;
-		else
-			nvmem->eeprom = bin_attr_rw_nvmem;
-	}
-	nvmem->eeprom.attr.name = "eeprom";
-	nvmem->eeprom.size = nvmem->size;
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-	nvmem->eeprom.attr.key = &eeprom_lock_key;
-#endif
-	nvmem->eeprom.private = &nvmem->dev;
-	nvmem->base_dev = config->base_dev;
-
-	rval = device_create_bin_file(nvmem->base_dev, &nvmem->eeprom);
-	if (rval) {
-		dev_err(&nvmem->dev,
-			"Failed to create eeprom binary file %d\n", rval);
-		return rval;
-	}
-
-	nvmem->flags |= FLAG_COMPAT;
-
-	return 0;
-}
-
-void nvmem_sysfs_remove_compat(struct nvmem_device *nvmem,
-			      const struct nvmem_config *config)
-{
-	if (config->compat)
-		device_remove_bin_file(nvmem->base_dev, &nvmem->eeprom);
-}
diff --git a/drivers/nvmem/nvmem.h b/drivers/nvmem/nvmem.h
deleted file mode 100644
index be0d66d..0000000
--- a/drivers/nvmem/nvmem.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-
-#ifndef _DRIVERS_NVMEM_H
-#define _DRIVERS_NVMEM_H
-
-#include <linux/device.h>
-#include <linux/fs.h>
-#include <linux/kref.h>
-#include <linux/list.h>
-#include <linux/nvmem-consumer.h>
-#include <linux/nvmem-provider.h>
-#include <linux/gpio/consumer.h>
-
-struct nvmem_device {
-	struct module		*owner;
-	struct device		dev;
-	int			stride;
-	int			word_size;
-	int			id;
-	struct kref		refcnt;
-	size_t			size;
-	bool			read_only;
-	int			flags;
-	enum nvmem_type		type;
-	struct bin_attribute	eeprom;
-	struct device		*base_dev;
-	struct list_head	cells;
-	nvmem_reg_read_t	reg_read;
-	nvmem_reg_write_t	reg_write;
-	struct gpio_desc	*wp_gpio;
-	void *priv;
-};
-
-#define to_nvmem_device(d) container_of(d, struct nvmem_device, dev)
-#define FLAG_COMPAT		BIT(0)
-
-#ifdef CONFIG_NVMEM_SYSFS
-const struct attribute_group **nvmem_sysfs_get_groups(
-					struct nvmem_device *nvmem,
-					const struct nvmem_config *config);
-int nvmem_sysfs_setup_compat(struct nvmem_device *nvmem,
-			      const struct nvmem_config *config);
-void nvmem_sysfs_remove_compat(struct nvmem_device *nvmem,
-			      const struct nvmem_config *config);
-#else
-static inline const struct attribute_group **nvmem_sysfs_get_groups(
-					struct nvmem_device *nvmem,
-					const struct nvmem_config *config)
-{
-	return NULL;
-}
-
-static inline int nvmem_sysfs_setup_compat(struct nvmem_device *nvmem,
-				      const struct nvmem_config *config)
-{
-	return -ENOSYS;
-}
-static inline void nvmem_sysfs_remove_compat(struct nvmem_device *nvmem,
-			      const struct nvmem_config *config)
-{
-}
-#endif /* CONFIG_NVMEM_SYSFS */
-
-#endif /* _DRIVERS_NVMEM_H */
diff --git a/drivers/nvmem/sprd-efuse.c b/drivers/nvmem/sprd-efuse.c
index 2f1e0fb..925feb2 100644
--- a/drivers/nvmem/sprd-efuse.c
+++ b/drivers/nvmem/sprd-efuse.c
@@ -217,12 +217,14 @@ static int sprd_efuse_raw_prog(struct sprd_efuse *efuse, u32 blk, bool doub,
 	 * Enable the auto-check function to validate if the programming is
 	 * successful.
 	 */
-	sprd_efuse_set_auto_check(efuse, true);
+	if (lock)
+		sprd_efuse_set_auto_check(efuse, true);
 
 	writel(*data, efuse->base + SPRD_EFUSE_MEM(blk));
 
 	/* Disable auto-check and data double after programming */
-	sprd_efuse_set_auto_check(efuse, false);
+	if (lock)
+		sprd_efuse_set_auto_check(efuse, false);
 	sprd_efuse_set_data_double(efuse, false);
 
 	/*
@@ -237,9 +239,9 @@ static int sprd_efuse_raw_prog(struct sprd_efuse *efuse, u32 blk, bool doub,
 		writel(SPRD_EFUSE_ERR_CLR_MASK,
 		       efuse->base + SPRD_EFUSE_ERR_CLR);
 		ret = -EBUSY;
-	} else {
+	} else if (lock) {
 		sprd_efuse_set_prog_lock(efuse, lock);
-		writel(*data, efuse->base + SPRD_EFUSE_MEM(blk));
+		writel(0, efuse->base + SPRD_EFUSE_MEM(blk));
 		sprd_efuse_set_prog_lock(efuse, false);
 	}
 
@@ -322,6 +324,8 @@ static int sprd_efuse_read(void *context, u32 offset, void *val, size_t bytes)
 static int sprd_efuse_write(void *context, u32 offset, void *val, size_t bytes)
 {
 	struct sprd_efuse *efuse = context;
+	bool blk_double = efuse->data->blk_double;
+	bool lock;
 	int ret;
 
 	ret = sprd_efuse_lock(efuse);
@@ -332,7 +336,20 @@ static int sprd_efuse_write(void *context, u32 offset, void *val, size_t bytes)
 	if (ret)
 		goto unlock;
 
-	ret = sprd_efuse_raw_prog(efuse, offset, false, false, val);
+	/*
+	 * If the writing bytes are equal with the block width, which means the
+	 * whole block will be programmed. For this case, we should not allow
+	 * this block to be programmed again by locking this block.
+	 *
+	 * If the block was programmed partially, we should allow this block to
+	 * be programmed again.
+	 */
+	if (bytes < SPRD_EFUSE_BLOCK_WIDTH)
+		lock = false;
+	else
+		lock = true;
+
+	ret = sprd_efuse_raw_prog(efuse, offset, blk_double, lock, val);
 
 	clk_disable_unprepare(efuse->clk);
 
diff --git a/drivers/of/address.c b/drivers/of/address.c
index e8a39c3..8eea3f6 100644
--- a/drivers/of/address.c
+++ b/drivers/of/address.c
@@ -100,6 +100,28 @@ static unsigned int of_bus_default_get_flags(const __be32 *addr)
 	return IORESOURCE_MEM;
 }
 
+static unsigned int of_bus_pci_get_flags(const __be32 *addr)
+{
+	unsigned int flags = 0;
+	u32 w = be32_to_cpup(addr);
+
+	if (!IS_ENABLED(CONFIG_PCI))
+		return 0;
+
+	switch((w >> 24) & 0x03) {
+	case 0x01:
+		flags |= IORESOURCE_IO;
+		break;
+	case 0x02: /* 32 bits */
+	case 0x03: /* 64 bits */
+		flags |= IORESOURCE_MEM;
+		break;
+	}
+	if (w & 0x40000000)
+		flags |= IORESOURCE_PREFETCH;
+	return flags;
+}
+
 #ifdef CONFIG_PCI
 /*
  * PCI bus specific translator
@@ -125,25 +147,6 @@ static void of_bus_pci_count_cells(struct device_node *np,
 		*sizec = 2;
 }
 
-static unsigned int of_bus_pci_get_flags(const __be32 *addr)
-{
-	unsigned int flags = 0;
-	u32 w = be32_to_cpup(addr);
-
-	switch((w >> 24) & 0x03) {
-	case 0x01:
-		flags |= IORESOURCE_IO;
-		break;
-	case 0x02: /* 32 bits */
-	case 0x03: /* 64 bits */
-		flags |= IORESOURCE_MEM;
-		break;
-	}
-	if (w & 0x40000000)
-		flags |= IORESOURCE_PREFETCH;
-	return flags;
-}
-
 static u64 of_bus_pci_map(__be32 *addr, const __be32 *range, int na, int ns,
 		int pna)
 {
@@ -234,93 +237,6 @@ int of_pci_address_to_resource(struct device_node *dev, int bar,
 }
 EXPORT_SYMBOL_GPL(of_pci_address_to_resource);
 
-static int parser_init(struct of_pci_range_parser *parser,
-			struct device_node *node, const char *name)
-{
-	const int na = 3, ns = 2;
-	int rlen;
-
-	parser->node = node;
-	parser->pna = of_n_addr_cells(node);
-	parser->np = parser->pna + na + ns;
-	parser->dma = !strcmp(name, "dma-ranges");
-
-	parser->range = of_get_property(node, name, &rlen);
-	if (parser->range == NULL)
-		return -ENOENT;
-
-	parser->end = parser->range + rlen / sizeof(__be32);
-
-	return 0;
-}
-
-int of_pci_range_parser_init(struct of_pci_range_parser *parser,
-				struct device_node *node)
-{
-	return parser_init(parser, node, "ranges");
-}
-EXPORT_SYMBOL_GPL(of_pci_range_parser_init);
-
-int of_pci_dma_range_parser_init(struct of_pci_range_parser *parser,
-				struct device_node *node)
-{
-	return parser_init(parser, node, "dma-ranges");
-}
-EXPORT_SYMBOL_GPL(of_pci_dma_range_parser_init);
-
-struct of_pci_range *of_pci_range_parser_one(struct of_pci_range_parser *parser,
-						struct of_pci_range *range)
-{
-	const int na = 3, ns = 2;
-
-	if (!range)
-		return NULL;
-
-	if (!parser->range || parser->range + parser->np > parser->end)
-		return NULL;
-
-	range->pci_space = be32_to_cpup(parser->range);
-	range->flags = of_bus_pci_get_flags(parser->range);
-	range->pci_addr = of_read_number(parser->range + 1, ns);
-	if (parser->dma)
-		range->cpu_addr = of_translate_dma_address(parser->node,
-				parser->range + na);
-	else
-		range->cpu_addr = of_translate_address(parser->node,
-				parser->range + na);
-	range->size = of_read_number(parser->range + parser->pna + na, ns);
-
-	parser->range += parser->np;
-
-	/* Now consume following elements while they are contiguous */
-	while (parser->range + parser->np <= parser->end) {
-		u32 flags;
-		u64 pci_addr, cpu_addr, size;
-
-		flags = of_bus_pci_get_flags(parser->range);
-		pci_addr = of_read_number(parser->range + 1, ns);
-		if (parser->dma)
-			cpu_addr = of_translate_dma_address(parser->node,
-					parser->range + na);
-		else
-			cpu_addr = of_translate_address(parser->node,
-					parser->range + na);
-		size = of_read_number(parser->range + parser->pna + na, ns);
-
-		if (flags != range->flags)
-			break;
-		if (pci_addr != range->pci_addr + range->size ||
-		    cpu_addr != range->cpu_addr + range->size)
-			break;
-
-		range->size += size;
-		parser->range += parser->np;
-	}
-
-	return range;
-}
-EXPORT_SYMBOL_GPL(of_pci_range_parser_one);
-
 /*
  * of_pci_range_to_resource - Create a resource from an of_pci_range
  * @range:	the PCI range that describes the resource
@@ -775,6 +691,101 @@ const __be32 *of_get_address(struct device_node *dev, int index, u64 *size,
 }
 EXPORT_SYMBOL(of_get_address);
 
+static int parser_init(struct of_pci_range_parser *parser,
+			struct device_node *node, const char *name)
+{
+	int rlen;
+
+	parser->node = node;
+	parser->pna = of_n_addr_cells(node);
+	parser->na = of_bus_n_addr_cells(node);
+	parser->ns = of_bus_n_size_cells(node);
+	parser->dma = !strcmp(name, "dma-ranges");
+
+	parser->range = of_get_property(node, name, &rlen);
+	if (parser->range == NULL)
+		return -ENOENT;
+
+	parser->end = parser->range + rlen / sizeof(__be32);
+
+	return 0;
+}
+
+int of_pci_range_parser_init(struct of_pci_range_parser *parser,
+				struct device_node *node)
+{
+	return parser_init(parser, node, "ranges");
+}
+EXPORT_SYMBOL_GPL(of_pci_range_parser_init);
+
+int of_pci_dma_range_parser_init(struct of_pci_range_parser *parser,
+				struct device_node *node)
+{
+	return parser_init(parser, node, "dma-ranges");
+}
+EXPORT_SYMBOL_GPL(of_pci_dma_range_parser_init);
+#define of_dma_range_parser_init of_pci_dma_range_parser_init
+
+struct of_pci_range *of_pci_range_parser_one(struct of_pci_range_parser *parser,
+						struct of_pci_range *range)
+{
+	int na = parser->na;
+	int ns = parser->ns;
+	int np = parser->pna + na + ns;
+
+	if (!range)
+		return NULL;
+
+	if (!parser->range || parser->range + np > parser->end)
+		return NULL;
+
+	if (parser->na == 3)
+		range->flags = of_bus_pci_get_flags(parser->range);
+	else
+		range->flags = 0;
+
+	range->pci_addr = of_read_number(parser->range, na);
+
+	if (parser->dma)
+		range->cpu_addr = of_translate_dma_address(parser->node,
+				parser->range + na);
+	else
+		range->cpu_addr = of_translate_address(parser->node,
+				parser->range + na);
+	range->size = of_read_number(parser->range + parser->pna + na, ns);
+
+	parser->range += np;
+
+	/* Now consume following elements while they are contiguous */
+	while (parser->range + np <= parser->end) {
+		u32 flags = 0;
+		u64 pci_addr, cpu_addr, size;
+
+		if (parser->na == 3)
+			flags = of_bus_pci_get_flags(parser->range);
+		pci_addr = of_read_number(parser->range, na);
+		if (parser->dma)
+			cpu_addr = of_translate_dma_address(parser->node,
+					parser->range + na);
+		else
+			cpu_addr = of_translate_address(parser->node,
+					parser->range + na);
+		size = of_read_number(parser->range + parser->pna + na, ns);
+
+		if (flags != range->flags)
+			break;
+		if (pci_addr != range->pci_addr + range->size ||
+		    cpu_addr != range->cpu_addr + range->size)
+			break;
+
+		range->size += size;
+		parser->range += np;
+	}
+
+	return range;
+}
+EXPORT_SYMBOL_GPL(of_pci_range_parser_one);
+
 static u64 of_translate_ioport(struct device_node *dev, const __be32 *in_addr,
 			u64 size)
 {
@@ -928,10 +939,12 @@ int of_dma_get_range(struct device_node *np, u64 *dma_addr, u64 *paddr, u64 *siz
 {
 	struct device_node *node = of_node_get(np);
 	const __be32 *ranges = NULL;
-	int len, naddr, nsize, pna;
+	int len;
 	int ret = 0;
 	bool found_dma_ranges = false;
-	u64 dmaaddr;
+	struct of_range_parser parser;
+	struct of_range range;
+	u64 dma_start = U64_MAX, dma_end = 0, dma_offset = 0;
 
 	while (node) {
 		ranges = of_get_property(node, "dma-ranges", &len);
@@ -956,32 +969,38 @@ int of_dma_get_range(struct device_node *np, u64 *dma_addr, u64 *paddr, u64 *siz
 		goto out;
 	}
 
-	naddr = of_bus_n_addr_cells(node);
-	nsize = of_bus_n_size_cells(node);
-	pna = of_n_addr_cells(node);
-	if ((len / sizeof(__be32)) % (pna + naddr + nsize)) {
+	of_dma_range_parser_init(&parser, node);
+
+	for_each_of_range(&parser, &range) {
+		pr_debug("dma_addr(%llx) cpu_addr(%llx) size(%llx)\n",
+			 range.bus_addr, range.cpu_addr, range.size);
+
+		if (dma_offset && range.cpu_addr - range.bus_addr != dma_offset) {
+			pr_warn("Can't handle multiple dma-ranges with different offsets on node(%pOF)\n", node);
+			/* Don't error out as we'd break some existing DTs */
+			continue;
+		}
+		dma_offset = range.cpu_addr - range.bus_addr;
+
+		/* Take lower and upper limits */
+		if (range.bus_addr < dma_start)
+			dma_start = range.bus_addr;
+		if (range.bus_addr + range.size > dma_end)
+			dma_end = range.bus_addr + range.size;
+	}
+
+	if (dma_start >= dma_end) {
 		ret = -EINVAL;
+		pr_debug("Invalid DMA ranges configuration on node(%pOF)\n",
+			 node);
 		goto out;
 	}
 
-	/* dma-ranges format:
-	 * DMA addr	: naddr cells
-	 * CPU addr	: pna cells
-	 * size		: nsize cells
-	 */
-	dmaaddr = of_read_number(ranges, naddr);
-	*paddr = of_translate_dma_address(node, ranges + naddr);
-	if (*paddr == OF_BAD_ADDR) {
-		pr_err("translation of DMA address(%llx) to CPU address failed node(%pOF)\n",
-		       dmaaddr, np);
-		ret = -EINVAL;
-		goto out;
-	}
-	*dma_addr = dmaaddr;
+	*dma_addr = dma_start;
+	*size = dma_end - dma_start;
+	*paddr = dma_start + dma_offset;
 
-	*size = of_read_number(ranges + naddr + pna, nsize);
-
-	pr_debug("dma_addr(%llx) cpu_addr(%llx) size(%llx)\n",
+	pr_debug("final: dma_addr(%llx) cpu_addr(%llx) size(%llx)\n",
 		 *dma_addr, *paddr, *size);
 
 out:
diff --git a/drivers/of/of_private.h b/drivers/of/of_private.h
index 207863c..edc6822 100644
--- a/drivers/of/of_private.h
+++ b/drivers/of/of_private.h
@@ -24,7 +24,7 @@ struct alias_prop {
 	const char *alias;
 	struct device_node *np;
 	int id;
-	char stem[0];
+	char stem[];
 };
 
 #if defined(CONFIG_SPARC)
diff --git a/drivers/of/of_reserved_mem.c b/drivers/of/of_reserved_mem.c
index 6bd610e..1a84bc0 100644
--- a/drivers/of/of_reserved_mem.c
+++ b/drivers/of/of_reserved_mem.c
@@ -22,7 +22,7 @@
 #include <linux/slab.h>
 #include <linux/memblock.h>
 
-#define MAX_RESERVED_REGIONS	32
+#define MAX_RESERVED_REGIONS	64
 static struct reserved_mem reserved_mem[MAX_RESERVED_REGIONS];
 static int reserved_mem_count;
 
diff --git a/drivers/of/overlay.c b/drivers/of/overlay.c
index c9219fd..50bbe0e 100644
--- a/drivers/of/overlay.c
+++ b/drivers/of/overlay.c
@@ -261,6 +261,8 @@ static struct property *dup_and_fixup_symbol_prop(
 
 	of_property_set_flag(new_prop, OF_DYNAMIC);
 
+	kfree(target_path);
+
 	return new_prop;
 
 err_free_new_prop:
diff --git a/drivers/of/property.c b/drivers/of/property.c
index f104f15..b4916dcc 100644
--- a/drivers/of/property.c
+++ b/drivers/of/property.c
@@ -1204,6 +1204,8 @@ DEFINE_SIMPLE_PROP(mboxes, "mboxes", "#mbox-cells")
 DEFINE_SIMPLE_PROP(io_channels, "io-channel", "#io-channel-cells")
 DEFINE_SIMPLE_PROP(interrupt_parent, "interrupt-parent", NULL)
 DEFINE_SIMPLE_PROP(dmas, "dmas", "#dma-cells")
+DEFINE_SIMPLE_PROP(power_domains, "power-domains", "#power-domain-cells")
+DEFINE_SIMPLE_PROP(hwlocks, "hwlocks", "#hwlock-cells")
 DEFINE_SUFFIX_PROP(regulators, "-supply", NULL)
 DEFINE_SUFFIX_PROP(gpio, "-gpio", "#gpio-cells")
 DEFINE_SUFFIX_PROP(gpios, "-gpios", "#gpio-cells")
@@ -1226,6 +1228,8 @@ static const struct supplier_bindings of_supplier_bindings[] = {
 	{ .parse_prop = parse_io_channels, },
 	{ .parse_prop = parse_interrupt_parent, },
 	{ .parse_prop = parse_dmas, },
+	{ .parse_prop = parse_power_domains, },
+	{ .parse_prop = parse_hwlocks, },
 	{ .parse_prop = parse_regulators, },
 	{ .parse_prop = parse_gpio, },
 	{ .parse_prop = parse_gpios, },
diff --git a/drivers/of/resolver.c b/drivers/of/resolver.c
index 83c7662..b278ab4 100644
--- a/drivers/of/resolver.c
+++ b/drivers/of/resolver.c
@@ -321,8 +321,11 @@ int of_resolve_phandles(struct device_node *overlay)
 
 		err = of_property_read_string(tree_symbols,
 				prop->name, &refpath);
-		if (err)
+		if (err) {
+			pr_err("node label '%s' not found in live devicetree symbols table\n",
+			       prop->name);
 			goto out;
+		}
 
 		refnode = of_find_node_by_path(refpath);
 		if (!refnode) {
diff --git a/drivers/of/unittest-data/Makefile b/drivers/of/unittest-data/Makefile
index 9b68070..009f404 100644
--- a/drivers/of/unittest-data/Makefile
+++ b/drivers/of/unittest-data/Makefile
@@ -21,7 +21,13 @@
 			    overlay_bad_add_dup_prop.dtb.o \
 			    overlay_bad_phandle.dtb.o \
 			    overlay_bad_symbol.dtb.o \
-			    overlay_base.dtb.o
+			    overlay_base.dtb.o \
+			    overlay_gpio_01.dtb.o \
+			    overlay_gpio_02a.dtb.o \
+			    overlay_gpio_02b.dtb.o \
+			    overlay_gpio_03.dtb.o \
+			    overlay_gpio_04a.dtb.o \
+			    overlay_gpio_04b.dtb.o
 
 # enable creation of __symbols__ node
 DTC_FLAGS_overlay += -@
diff --git a/drivers/of/unittest-data/overlay_bad_add_dup_prop.dts b/drivers/of/unittest-data/overlay_bad_add_dup_prop.dts
index c190da5..6327d1f 100644
--- a/drivers/of/unittest-data/overlay_bad_add_dup_prop.dts
+++ b/drivers/of/unittest-data/overlay_bad_add_dup_prop.dts
@@ -3,22 +3,37 @@
 /plugin/;
 
 /*
- * &electric_1/motor-1 and &spin_ctrl_1 are the same node:
- *   /testcase-data-2/substation@100/motor-1
+ * &electric_1/motor-1/electric and &spin_ctrl_1/electric are the same node:
+ *   /testcase-data-2/substation@100/motor-1/electric
  *
  * Thus the property "rpm_avail" in each fragment will
  * result in an attempt to update the same property twice.
  * This will result in an error and the overlay apply
  * will fail.
+ *
+ * The previous version of this test did not include the extra
+ * level of node 'electric'.  That resulted in the 'rpm_avail'
+ * property being located in the pre-existing node 'motor-1'.
+ * Modifying a property results in a WARNING that a memory leak
+ * will occur if the overlay is removed.  Since the overlay apply
+ * fails, the memory leak does actually occur, and kmemleak will
+ * further report the memory leak if CONFIG_DEBUG_KMEMLEAK is
+ * enabled.  Adding the overlay node 'electric' avoids the
+ * memory leak and thus people who use kmemleak will not
+ * have to debug this non-problem again.
  */
 
 &electric_1 {
 
 	motor-1 {
-		rpm_avail = < 100 >;
+		electric {
+			rpm_avail = < 100 >;
+		};
 	};
 };
 
 &spin_ctrl_1 {
-		rpm_avail = < 100 200 >;
+		electric {
+			rpm_avail = < 100 200 >;
+		};
 };
diff --git a/drivers/of/unittest-data/overlay_gpio_01.dts b/drivers/of/unittest-data/overlay_gpio_01.dts
new file mode 100644
index 0000000..699ff10
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_gpio_01.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+&unittest_test_bus {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	gpio@0 {
+		compatible = "unittest-gpio";
+		reg = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ngpios = <2>;
+		gpio-line-names = "line-A", "line-B";
+
+		line-b {
+			gpio-hog;
+			gpios = <2 0>;
+			input;
+			line-name = "line-B-input";
+		};
+	};
+};
diff --git a/drivers/of/unittest-data/overlay_gpio_02a.dts b/drivers/of/unittest-data/overlay_gpio_02a.dts
new file mode 100644
index 0000000..ec59aff6
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_gpio_02a.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+&unittest_test_bus {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	gpio@2 {
+		compatible = "unittest-gpio";
+		reg = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ngpios = <2>;
+		gpio-line-names = "line-A", "line-B";
+	};
+};
diff --git a/drivers/of/unittest-data/overlay_gpio_02b.dts b/drivers/of/unittest-data/overlay_gpio_02b.dts
new file mode 100644
index 0000000..43ce111
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_gpio_02b.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+&unittest_test_bus {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	gpio@2 {
+		line-a {
+			gpio-hog;
+			gpios = <1 0>;
+			input;
+			line-name = "line-A-input";
+		};
+	};
+};
diff --git a/drivers/of/unittest-data/overlay_gpio_03.dts b/drivers/of/unittest-data/overlay_gpio_03.dts
new file mode 100644
index 0000000..6e03123
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_gpio_03.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+&unittest_test_bus {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	gpio@3 {
+		compatible = "unittest-gpio";
+		reg = <3>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ngpios = <2>;
+		gpio-line-names = "line-A", "line-B", "line-C", "line-D";
+
+		line-d {
+			gpio-hog;
+			gpios = <4 0>;
+			input;
+			line-name = "line-D-input";
+		};
+	};
+};
diff --git a/drivers/of/unittest-data/overlay_gpio_04a.dts b/drivers/of/unittest-data/overlay_gpio_04a.dts
new file mode 100644
index 0000000..7b1e04e
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_gpio_04a.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+&unittest_test_bus {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	gpio@4 {
+		compatible = "unittest-gpio";
+		reg = <4>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ngpios = <2>;
+		gpio-line-names = "line-A", "line-B", "line-C", "line-D";
+	};
+};
diff --git a/drivers/of/unittest-data/overlay_gpio_04b.dts b/drivers/of/unittest-data/overlay_gpio_04b.dts
new file mode 100644
index 0000000..a14e95c
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_gpio_04b.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+&unittest_test_bus {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	gpio@4 {
+		line-c {
+			gpio-hog;
+			gpios = <3 0>;
+			input;
+			line-name = "line-C-input";
+		};
+	};
+};
diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c
index 68b8758..398de04 100644
--- a/drivers/of/unittest.c
+++ b/drivers/of/unittest.c
@@ -24,6 +24,7 @@
 
 #include <linux/i2c.h>
 #include <linux/i2c-mux.h>
+#include <linux/gpio/driver.h>
 
 #include <linux/bitops.h>
 
@@ -46,6 +47,20 @@ static struct unittest_results {
 	failed; \
 })
 
+/*
+ * Expected message may have a message level other than KERN_INFO.
+ * Print the expected message only if the current loglevel will allow
+ * the actual message to print.
+ *
+ * Do not use EXPECT_BEGIN() or EXPECT_END() for messages generated by
+ * pr_debug().
+ */
+#define EXPECT_BEGIN(level, fmt, ...) \
+	printk(level pr_fmt("EXPECT \\ : ") fmt, ##__VA_ARGS__)
+
+#define EXPECT_END(level, fmt, ...) \
+	printk(level pr_fmt("EXPECT / : ") fmt, ##__VA_ARGS__)
+
 static void __init of_unittest_find_node_by_name(void)
 {
 	struct device_node *np;
@@ -444,29 +459,77 @@ static void __init of_unittest_parse_phandle_with_args(void)
 
 	/* Check for missing cells property */
 	memset(&args, 0, sizeof(args));
+
+	EXPECT_BEGIN(KERN_INFO,
+		     "OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1");
+
 	rc = of_parse_phandle_with_args(np, "phandle-list",
 					"#phandle-cells-missing", 0, &args);
+
+	EXPECT_END(KERN_INFO,
+		   "OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1");
+
 	unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc);
+
+	EXPECT_BEGIN(KERN_INFO,
+		     "OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1");
+
 	rc = of_count_phandle_with_args(np, "phandle-list",
 					"#phandle-cells-missing");
+
+	EXPECT_END(KERN_INFO,
+		   "OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1");
+
 	unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc);
 
 	/* Check for bad phandle in list */
 	memset(&args, 0, sizeof(args));
+
+	EXPECT_BEGIN(KERN_INFO,
+		     "OF: /testcase-data/phandle-tests/consumer-a: could not find phandle");
+
 	rc = of_parse_phandle_with_args(np, "phandle-list-bad-phandle",
 					"#phandle-cells", 0, &args);
+
+	EXPECT_END(KERN_INFO,
+		   "OF: /testcase-data/phandle-tests/consumer-a: could not find phandle");
+
 	unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc);
+
+	EXPECT_BEGIN(KERN_INFO,
+		     "OF: /testcase-data/phandle-tests/consumer-a: could not find phandle");
+
 	rc = of_count_phandle_with_args(np, "phandle-list-bad-phandle",
 					"#phandle-cells");
+
+	EXPECT_END(KERN_INFO,
+		   "OF: /testcase-data/phandle-tests/consumer-a: could not find phandle");
+
 	unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc);
 
 	/* Check for incorrectly formed argument list */
 	memset(&args, 0, sizeof(args));
+
+	EXPECT_BEGIN(KERN_INFO,
+		     "OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1");
+
 	rc = of_parse_phandle_with_args(np, "phandle-list-bad-args",
 					"#phandle-cells", 1, &args);
+
+	EXPECT_END(KERN_INFO,
+		   "OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1");
+
 	unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc);
+
+	EXPECT_BEGIN(KERN_INFO,
+		     "OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1");
+
 	rc = of_count_phandle_with_args(np, "phandle-list-bad-args",
 					"#phandle-cells");
+
+	EXPECT_END(KERN_INFO,
+		   "OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1");
+
 	unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc);
 }
 
@@ -577,20 +640,41 @@ static void __init of_unittest_parse_phandle_with_args_map(void)
 
 	/* Check for missing cells,map,mask property */
 	memset(&args, 0, sizeof(args));
+
+	EXPECT_BEGIN(KERN_INFO,
+		     "OF: /testcase-data/phandle-tests/consumer-b: could not get #phandle-missing-cells for /testcase-data/phandle-tests/provider1");
+
 	rc = of_parse_phandle_with_args_map(np, "phandle-list",
 					    "phandle-missing", 0, &args);
+	EXPECT_END(KERN_INFO,
+		   "OF: /testcase-data/phandle-tests/consumer-b: could not get #phandle-missing-cells for /testcase-data/phandle-tests/provider1");
+
 	unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc);
 
 	/* Check for bad phandle in list */
 	memset(&args, 0, sizeof(args));
+
+	EXPECT_BEGIN(KERN_INFO,
+		     "OF: /testcase-data/phandle-tests/consumer-b: could not find phandle");
+
 	rc = of_parse_phandle_with_args_map(np, "phandle-list-bad-phandle",
 					    "phandle", 0, &args);
+	EXPECT_END(KERN_INFO,
+		   "OF: /testcase-data/phandle-tests/consumer-b: could not find phandle");
+
 	unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc);
 
 	/* Check for incorrectly formed argument list */
 	memset(&args, 0, sizeof(args));
+
+	EXPECT_BEGIN(KERN_INFO,
+		     "OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found -1");
+
 	rc = of_parse_phandle_with_args_map(np, "phandle-list-bad-args",
 					    "phandle", 1, &args);
+	EXPECT_END(KERN_INFO,
+		   "OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found -1");
+
 	unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc);
 }
 
@@ -777,6 +861,10 @@ static void __init of_unittest_changeset(void)
 	unittest(!of_changeset_revert(&chgset), "revert failed\n");
 
 	of_changeset_destroy(&chgset);
+
+	of_node_put(n1);
+	of_node_put(n2);
+	of_node_put(n21);
 #endif
 }
 
@@ -1121,7 +1209,15 @@ static void __init of_unittest_platform_populate(void)
 		np = of_find_node_by_path("/testcase-data/testcase-device2");
 		pdev = of_find_device_by_node(np);
 		unittest(pdev, "device 2 creation failed\n");
+
+		EXPECT_BEGIN(KERN_INFO,
+			     "platform testcase-data:testcase-device2: IRQ index 0 not found");
+
 		irq = platform_get_irq(pdev, 0);
+
+		EXPECT_END(KERN_INFO,
+			   "platform testcase-data:testcase-device2: IRQ index 0 not found");
+
 		unittest(irq < 0 && irq != -EPROBE_DEFER,
 			 "device parsing error failed - %d\n", irq);
 	}
@@ -1151,10 +1247,13 @@ static void __init of_unittest_platform_populate(void)
 
 	of_platform_populate(np, match, NULL, &test_bus->dev);
 	for_each_child_of_node(np, child) {
-		for_each_child_of_node(child, grandchild)
-			unittest(of_find_device_by_node(grandchild),
+		for_each_child_of_node(child, grandchild) {
+			pdev = of_find_device_by_node(grandchild);
+			unittest(pdev,
 				 "Could not create device for node '%pOFn'\n",
 				 grandchild);
+			of_dev_put(pdev);
+		}
 	}
 
 	of_platform_depopulate(&test_bus->dev);
@@ -1325,6 +1424,9 @@ static int __init unittest_data_add(void)
 		return 0;
 	}
 
+	EXPECT_BEGIN(KERN_INFO,
+		     "Duplicate name in testcase-data, renamed to \"duplicate-name#1\"");
+
 	/* attach the sub-tree to live tree */
 	np = unittest_data_node->child;
 	while (np) {
@@ -1335,6 +1437,9 @@ static int __init unittest_data_add(void)
 		np = next;
 	}
 
+	EXPECT_END(KERN_INFO,
+		   "Duplicate name in testcase-data, renamed to \"duplicate-name#1\"");
+
 	of_overlay_mutex_unlock();
 
 	return 0;
@@ -1410,6 +1515,249 @@ static int of_path_platform_device_exists(const char *path)
 	return pdev != NULL;
 }
 
+#ifdef CONFIG_OF_GPIO
+
+struct unittest_gpio_dev {
+	struct gpio_chip chip;
+};
+
+static int unittest_gpio_chip_request_count;
+static int unittest_gpio_probe_count;
+static int unittest_gpio_probe_pass_count;
+
+static int unittest_gpio_chip_request(struct gpio_chip *chip, unsigned int offset)
+{
+	unittest_gpio_chip_request_count++;
+
+	pr_debug("%s(): %s %d %d\n", __func__, chip->label, offset,
+		 unittest_gpio_chip_request_count);
+	return 0;
+}
+
+static int unittest_gpio_probe(struct platform_device *pdev)
+{
+	struct unittest_gpio_dev *devptr;
+	int ret;
+
+	unittest_gpio_probe_count++;
+
+	devptr = kzalloc(sizeof(*devptr), GFP_KERNEL);
+	if (!devptr)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, devptr);
+
+	devptr->chip.of_node = pdev->dev.of_node;
+	devptr->chip.label = "of-unittest-gpio";
+	devptr->chip.base = -1; /* dynamic allocation */
+	devptr->chip.ngpio = 5;
+	devptr->chip.request = unittest_gpio_chip_request;
+
+	ret = gpiochip_add_data(&devptr->chip, NULL);
+
+	unittest(!ret,
+		 "gpiochip_add_data() for node @%pOF failed, ret = %d\n", devptr->chip.of_node, ret);
+
+	if (!ret)
+		unittest_gpio_probe_pass_count++;
+	return ret;
+}
+
+static int unittest_gpio_remove(struct platform_device *pdev)
+{
+	struct unittest_gpio_dev *gdev = platform_get_drvdata(pdev);
+	struct device *dev = &pdev->dev;
+	struct device_node *np = pdev->dev.of_node;
+
+	dev_dbg(dev, "%s for node @%pOF\n", __func__, np);
+
+	if (!gdev)
+		return -EINVAL;
+
+	if (gdev->chip.base != -1)
+		gpiochip_remove(&gdev->chip);
+
+	platform_set_drvdata(pdev, NULL);
+	kfree(gdev);
+
+	return 0;
+}
+
+static const struct of_device_id unittest_gpio_id[] = {
+	{ .compatible = "unittest-gpio", },
+	{}
+};
+
+static struct platform_driver unittest_gpio_driver = {
+	.probe	= unittest_gpio_probe,
+	.remove	= unittest_gpio_remove,
+	.driver	= {
+		.name		= "unittest-gpio",
+		.of_match_table	= of_match_ptr(unittest_gpio_id),
+	},
+};
+
+static void __init of_unittest_overlay_gpio(void)
+{
+	int chip_request_count;
+	int probe_pass_count;
+	int ret;
+
+	/*
+	 * tests: apply overlays before registering driver
+	 * Similar to installing a driver as a module, the
+	 * driver is registered after applying the overlays.
+	 *
+	 * The overlays are applied by overlay_data_apply()
+	 * instead of of_unittest_apply_overlay() so that they
+	 * will not be tracked.  Thus they will not be removed
+	 * by of_unittest_destroy_tracked_overlays().
+	 *
+	 * - apply overlay_gpio_01
+	 * - apply overlay_gpio_02a
+	 * - apply overlay_gpio_02b
+	 * - register driver
+	 *
+	 * register driver will result in
+	 *   - probe and processing gpio hog for overlay_gpio_01
+	 *   - probe for overlay_gpio_02a
+	 *   - processing gpio for overlay_gpio_02b
+	 */
+
+	probe_pass_count = unittest_gpio_probe_pass_count;
+	chip_request_count = unittest_gpio_chip_request_count;
+
+	/*
+	 * overlay_gpio_01 contains gpio node and child gpio hog node
+	 * overlay_gpio_02a contains gpio node
+	 * overlay_gpio_02b contains child gpio hog node
+	 */
+
+	unittest(overlay_data_apply("overlay_gpio_01", NULL),
+		 "Adding overlay 'overlay_gpio_01' failed\n");
+
+	unittest(overlay_data_apply("overlay_gpio_02a", NULL),
+		 "Adding overlay 'overlay_gpio_02a' failed\n");
+
+	unittest(overlay_data_apply("overlay_gpio_02b", NULL),
+		 "Adding overlay 'overlay_gpio_02b' failed\n");
+
+	/*
+	 * messages are the result of the probes, after the
+	 * driver is registered
+	 */
+
+	EXPECT_BEGIN(KERN_INFO,
+		     "GPIO line <<int>> (line-B-input) hogged as input\n");
+
+	EXPECT_BEGIN(KERN_INFO,
+		     "GPIO line <<int>> (line-A-input) hogged as input\n");
+
+	ret = platform_driver_register(&unittest_gpio_driver);
+	if (unittest(ret == 0, "could not register unittest gpio driver\n"))
+		return;
+
+	EXPECT_END(KERN_INFO,
+		   "GPIO line <<int>> (line-A-input) hogged as input\n");
+	EXPECT_END(KERN_INFO,
+		   "GPIO line <<int>> (line-B-input) hogged as input\n");
+
+	unittest(probe_pass_count + 2 == unittest_gpio_probe_pass_count,
+		 "unittest_gpio_probe() failed or not called\n");
+
+	unittest(chip_request_count + 2 == unittest_gpio_chip_request_count,
+		 "unittest_gpio_chip_request() called %d times (expected 1 time)\n",
+		 unittest_gpio_chip_request_count - chip_request_count);
+
+	/*
+	 * tests: apply overlays after registering driver
+	 *
+	 * Similar to a driver built-in to the kernel, the
+	 * driver is registered before applying the overlays.
+	 *
+	 * overlay_gpio_03 contains gpio node and child gpio hog node
+	 *
+	 * - apply overlay_gpio_03
+	 *
+	 * apply overlay will result in
+	 *   - probe and processing gpio hog.
+	 */
+
+	probe_pass_count = unittest_gpio_probe_pass_count;
+	chip_request_count = unittest_gpio_chip_request_count;
+
+	EXPECT_BEGIN(KERN_INFO,
+		     "GPIO line <<int>> (line-D-input) hogged as input\n");
+
+	/* overlay_gpio_03 contains gpio node and child gpio hog node */
+
+	unittest(overlay_data_apply("overlay_gpio_03", NULL),
+		 "Adding overlay 'overlay_gpio_03' failed\n");
+
+	EXPECT_END(KERN_INFO,
+		   "GPIO line <<int>> (line-D-input) hogged as input\n");
+
+	unittest(probe_pass_count + 1 == unittest_gpio_probe_pass_count,
+		 "unittest_gpio_probe() failed or not called\n");
+
+	unittest(chip_request_count + 1 == unittest_gpio_chip_request_count,
+		 "unittest_gpio_chip_request() called %d times (expected 1 time)\n",
+		 unittest_gpio_chip_request_count - chip_request_count);
+
+	/*
+	 * overlay_gpio_04a contains gpio node
+	 *
+	 * - apply overlay_gpio_04a
+	 *
+	 * apply the overlay will result in
+	 *   - probe for overlay_gpio_04a
+	 */
+
+	probe_pass_count = unittest_gpio_probe_pass_count;
+	chip_request_count = unittest_gpio_chip_request_count;
+
+	/* overlay_gpio_04a contains gpio node */
+
+	unittest(overlay_data_apply("overlay_gpio_04a", NULL),
+		 "Adding overlay 'overlay_gpio_04a' failed\n");
+
+	unittest(probe_pass_count + 1 == unittest_gpio_probe_pass_count,
+		 "unittest_gpio_probe() failed or not called\n");
+
+	/*
+	 * overlay_gpio_04b contains child gpio hog node
+	 *
+	 * - apply overlay_gpio_04b
+	 *
+	 * apply the overlay will result in
+	 *   - processing gpio for overlay_gpio_04b
+	 */
+
+	EXPECT_BEGIN(KERN_INFO,
+		     "GPIO line <<int>> (line-C-input) hogged as input\n");
+
+	/* overlay_gpio_04b contains child gpio hog node */
+
+	unittest(overlay_data_apply("overlay_gpio_04b", NULL),
+		 "Adding overlay 'overlay_gpio_04b' failed\n");
+
+	EXPECT_END(KERN_INFO,
+		   "GPIO line <<int>> (line-C-input) hogged as input\n");
+
+	unittest(chip_request_count + 1 == unittest_gpio_chip_request_count,
+		 "unittest_gpio_chip_request() called %d times (expected 1 time)\n",
+		 unittest_gpio_chip_request_count - chip_request_count);
+}
+
+#else
+
+static void __init of_unittest_overlay_gpio(void)
+{
+	/* skip tests */
+}
+
+#endif
+
 #if IS_BUILTIN(CONFIG_I2C)
 
 /* get the i2c client device instantiated at the path */
@@ -1511,19 +1859,27 @@ static const char *overlay_name_from_nr(int nr)
 
 static const char *bus_path = "/testcase-data/overlay-node/test-bus";
 
-/* it is guaranteed that overlay ids are assigned in sequence */
+/* FIXME: it is NOT guaranteed that overlay ids are assigned in sequence */
+
 #define MAX_UNITTEST_OVERLAYS	256
 static unsigned long overlay_id_bits[BITS_TO_LONGS(MAX_UNITTEST_OVERLAYS)];
 static int overlay_first_id = -1;
 
+static long of_unittest_overlay_tracked(int id)
+{
+	if (WARN_ON(id >= MAX_UNITTEST_OVERLAYS))
+		return 0;
+	return overlay_id_bits[BIT_WORD(id)] & BIT_MASK(id);
+}
+
 static void of_unittest_track_overlay(int id)
 {
 	if (overlay_first_id < 0)
 		overlay_first_id = id;
 	id -= overlay_first_id;
 
-	/* we shouldn't need that many */
-	BUG_ON(id >= MAX_UNITTEST_OVERLAYS);
+	if (WARN_ON(id >= MAX_UNITTEST_OVERLAYS))
+		return;
 	overlay_id_bits[BIT_WORD(id)] |= BIT_MASK(id);
 }
 
@@ -1532,7 +1888,8 @@ static void of_unittest_untrack_overlay(int id)
 	if (overlay_first_id < 0)
 		return;
 	id -= overlay_first_id;
-	BUG_ON(id >= MAX_UNITTEST_OVERLAYS);
+	if (WARN_ON(id >= MAX_UNITTEST_OVERLAYS))
+		return;
 	overlay_id_bits[BIT_WORD(id)] &= ~BIT_MASK(id);
 }
 
@@ -1548,7 +1905,7 @@ static void of_unittest_destroy_tracked_overlays(void)
 		defers = 0;
 		/* remove in reverse order */
 		for (id = MAX_UNITTEST_OVERLAYS - 1; id >= 0; id--) {
-			if (!(overlay_id_bits[BIT_WORD(id)] & BIT_MASK(id)))
+			if (!of_unittest_overlay_tracked(id))
 				continue;
 
 			ovcs_id = id + overlay_first_id;
@@ -1565,7 +1922,7 @@ static void of_unittest_destroy_tracked_overlays(void)
 				continue;
 			}
 
-			overlay_id_bits[BIT_WORD(id)] &= ~BIT_MASK(id);
+			of_unittest_untrack_overlay(id);
 		}
 	} while (defers > 0);
 }
@@ -1626,7 +1983,7 @@ static int __init of_unittest_apply_revert_overlay_check(int overlay_nr,
 		int unittest_nr, int before, int after,
 		enum overlay_type ovtype)
 {
-	int ret, ovcs_id;
+	int ret, ovcs_id, save_id;
 
 	/* unittest device must be in before state */
 	if (of_unittest_device_exists(unittest_nr, ovtype) != before) {
@@ -1654,6 +2011,7 @@ static int __init of_unittest_apply_revert_overlay_check(int overlay_nr,
 		return -EINVAL;
 	}
 
+	save_id = ovcs_id;
 	ret = of_overlay_remove(&ovcs_id);
 	if (ret != 0) {
 		unittest(0, "%s failed to be destroyed @\"%s\"\n",
@@ -1661,6 +2019,7 @@ static int __init of_unittest_apply_revert_overlay_check(int overlay_nr,
 				unittest_path(unittest_nr, ovtype));
 		return ret;
 	}
+	of_unittest_untrack_overlay(save_id);
 
 	/* unittest device must be again in before state */
 	if (of_unittest_device_exists(unittest_nr, PDEV_OVERLAY) != before) {
@@ -1677,8 +2036,18 @@ static int __init of_unittest_apply_revert_overlay_check(int overlay_nr,
 /* test activation of device */
 static void __init of_unittest_overlay_0(void)
 {
+	int ret;
+
+	EXPECT_BEGIN(KERN_INFO,
+		     "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest0/status");
+
 	/* device should enable */
-	if (of_unittest_apply_overlay_check(0, 0, 0, 1, PDEV_OVERLAY))
+	ret = of_unittest_apply_overlay_check(0, 0, 0, 1, PDEV_OVERLAY);
+
+	EXPECT_END(KERN_INFO,
+		   "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest0/status");
+
+	if (ret)
 		return;
 
 	unittest(1, "overlay test %d passed\n", 0);
@@ -1687,28 +2056,58 @@ static void __init of_unittest_overlay_0(void)
 /* test deactivation of device */
 static void __init of_unittest_overlay_1(void)
 {
+	int ret;
+
+	EXPECT_BEGIN(KERN_INFO,
+		     "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest1/status");
+
 	/* device should disable */
-	if (of_unittest_apply_overlay_check(1, 1, 1, 0, PDEV_OVERLAY))
+	ret = of_unittest_apply_overlay_check(1, 1, 1, 0, PDEV_OVERLAY);
+
+	EXPECT_END(KERN_INFO,
+		   "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest1/status");
+
+	if (ret)
 		return;
 
 	unittest(1, "overlay test %d passed\n", 1);
+
 }
 
 /* test activation of device */
 static void __init of_unittest_overlay_2(void)
 {
-	/* device should enable */
-	if (of_unittest_apply_overlay_check(2, 2, 0, 1, PDEV_OVERLAY))
-		return;
+	int ret;
 
+	EXPECT_BEGIN(KERN_INFO,
+		     "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest2/status");
+
+	/* device should enable */
+	ret = of_unittest_apply_overlay_check(2, 2, 0, 1, PDEV_OVERLAY);
+
+	EXPECT_END(KERN_INFO,
+		   "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest2/status");
+
+	if (ret)
+		return;
 	unittest(1, "overlay test %d passed\n", 2);
 }
 
 /* test deactivation of device */
 static void __init of_unittest_overlay_3(void)
 {
+	int ret;
+
+	EXPECT_BEGIN(KERN_INFO,
+		     "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest3/status");
+
 	/* device should disable */
-	if (of_unittest_apply_overlay_check(3, 3, 1, 0, PDEV_OVERLAY))
+	ret = of_unittest_apply_overlay_check(3, 3, 1, 0, PDEV_OVERLAY);
+
+	EXPECT_END(KERN_INFO,
+		   "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest3/status");
+
+	if (ret)
 		return;
 
 	unittest(1, "overlay test %d passed\n", 3);
@@ -1727,8 +2126,18 @@ static void __init of_unittest_overlay_4(void)
 /* test overlay apply/revert sequence */
 static void __init of_unittest_overlay_5(void)
 {
+	int ret;
+
+	EXPECT_BEGIN(KERN_INFO,
+		     "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest5/status");
+
 	/* device should disable */
-	if (of_unittest_apply_revert_overlay_check(5, 5, 0, 1, PDEV_OVERLAY))
+	ret = of_unittest_apply_revert_overlay_check(5, 5, 0, 1, PDEV_OVERLAY);
+
+	EXPECT_END(KERN_INFO,
+		   "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest5/status");
+
+	if (ret)
 		return;
 
 	unittest(1, "overlay test %d passed\n", 5);
@@ -1742,6 +2151,8 @@ static void __init of_unittest_overlay_6(void)
 	int before = 0, after = 1;
 	const char *overlay_name;
 
+	int ret;
+
 	/* unittest device must be in before state */
 	for (i = 0; i < 2; i++) {
 		if (of_unittest_device_exists(unittest_nr + i, PDEV_OVERLAY)
@@ -1756,18 +2167,41 @@ static void __init of_unittest_overlay_6(void)
 	}
 
 	/* apply the overlays */
-	for (i = 0; i < 2; i++) {
 
-		overlay_name = overlay_name_from_nr(overlay_nr + i);
+	EXPECT_BEGIN(KERN_INFO,
+		     "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest6/status");
 
-		if (!overlay_data_apply(overlay_name, &ovcs_id)) {
-			unittest(0, "could not apply overlay \"%s\"\n",
-					overlay_name);
+	overlay_name = overlay_name_from_nr(overlay_nr + 0);
+
+	ret = overlay_data_apply(overlay_name, &ovcs_id);
+
+	if (!ret) {
+		unittest(0, "could not apply overlay \"%s\"\n", overlay_name);
 			return;
-		}
-		ov_id[i] = ovcs_id;
-		of_unittest_track_overlay(ov_id[i]);
 	}
+	ov_id[0] = ovcs_id;
+	of_unittest_track_overlay(ov_id[0]);
+
+	EXPECT_END(KERN_INFO,
+		   "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest6/status");
+
+	EXPECT_BEGIN(KERN_INFO,
+		     "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest7/status");
+
+	overlay_name = overlay_name_from_nr(overlay_nr + 1);
+
+	ret = overlay_data_apply(overlay_name, &ovcs_id);
+
+	if (!ret) {
+		unittest(0, "could not apply overlay \"%s\"\n", overlay_name);
+			return;
+	}
+	ov_id[1] = ovcs_id;
+	of_unittest_track_overlay(ov_id[1]);
+
+	EXPECT_END(KERN_INFO,
+		   "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest7/status");
+
 
 	for (i = 0; i < 2; i++) {
 		/* unittest device must be in after state */
@@ -1808,6 +2242,7 @@ static void __init of_unittest_overlay_6(void)
 	}
 
 	unittest(1, "overlay test %d passed\n", 6);
+
 }
 
 /* test overlay application in sequence */
@@ -1816,26 +2251,65 @@ static void __init of_unittest_overlay_8(void)
 	int i, ov_id[2], ovcs_id;
 	int overlay_nr = 8, unittest_nr = 8;
 	const char *overlay_name;
+	int ret;
 
 	/* we don't care about device state in this test */
 
+	EXPECT_BEGIN(KERN_INFO,
+		     "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest8/status");
+
+	overlay_name = overlay_name_from_nr(overlay_nr + 0);
+
+	ret = overlay_data_apply(overlay_name, &ovcs_id);
+	if (!ret)
+		unittest(0, "could not apply overlay \"%s\"\n", overlay_name);
+
+	EXPECT_END(KERN_INFO,
+		   "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest8/status");
+
+	if (!ret)
+		return;
+
+	ov_id[0] = ovcs_id;
+	of_unittest_track_overlay(ov_id[0]);
+
+	overlay_name = overlay_name_from_nr(overlay_nr + 1);
+
+	EXPECT_BEGIN(KERN_INFO,
+		     "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest8/property-foo");
+
 	/* apply the overlays */
-	for (i = 0; i < 2; i++) {
+	ret = overlay_data_apply(overlay_name, &ovcs_id);
 
-		overlay_name = overlay_name_from_nr(overlay_nr + i);
+	EXPECT_END(KERN_INFO,
+		   "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest8/property-foo");
 
-		if (!overlay_data_apply(overlay_name, &ovcs_id)) {
-			unittest(0, "could not apply overlay \"%s\"\n",
-					overlay_name);
-			return;
-		}
-		ov_id[i] = ovcs_id;
-		of_unittest_track_overlay(ov_id[i]);
+	if (!ret) {
+		unittest(0, "could not apply overlay \"%s\"\n", overlay_name);
+		return;
 	}
 
+	ov_id[1] = ovcs_id;
+	of_unittest_track_overlay(ov_id[1]);
+
 	/* now try to remove first overlay (it should fail) */
 	ovcs_id = ov_id[0];
-	if (!of_overlay_remove(&ovcs_id)) {
+
+	EXPECT_BEGIN(KERN_INFO,
+		     "OF: overlay: node_overlaps_later_cs: #6 overlaps with #7 @/testcase-data/overlay-node/test-bus/test-unittest8");
+
+	EXPECT_BEGIN(KERN_INFO,
+		     "OF: overlay: overlay #6 is not topmost");
+
+	ret = of_overlay_remove(&ovcs_id);
+
+	EXPECT_END(KERN_INFO,
+		   "OF: overlay: overlay #6 is not topmost");
+
+	EXPECT_END(KERN_INFO,
+		   "OF: overlay: node_overlaps_later_cs: #6 overlaps with #7 @/testcase-data/overlay-node/test-bus/test-unittest8");
+
+	if (!ret) {
 		unittest(0, "%s was destroyed @\"%s\"\n",
 				overlay_name_from_nr(overlay_nr + 0),
 				unittest_path(unittest_nr,
@@ -1867,6 +2341,7 @@ static void __init of_unittest_overlay_10(void)
 
 	/* device should disable */
 	ret = of_unittest_apply_overlay_check(10, 10, 0, 1, PDEV_OVERLAY);
+
 	if (unittest(ret == 0,
 			"overlay test %d failed; overlay application\n", 10))
 		return;
@@ -1890,6 +2365,7 @@ static void __init of_unittest_overlay_11(void)
 	/* device should disable */
 	ret = of_unittest_apply_revert_overlay_check(11, 11, 0, 1,
 			PDEV_OVERLAY);
+
 	unittest(ret == 0, "overlay test %d failed; overlay apply\n", 11);
 }
 
@@ -2120,12 +2596,21 @@ static int of_unittest_overlay_i2c_init(void)
 		return ret;
 
 	ret = platform_driver_register(&unittest_i2c_bus_driver);
+
 	if (unittest(ret == 0,
 			"could not register unittest i2c bus driver\n"))
 		return ret;
 
 #if IS_BUILTIN(CONFIG_I2C_MUX)
+
+	EXPECT_BEGIN(KERN_INFO,
+		     "i2c i2c-1: Added multiplexed i2c bus 2");
+
 	ret = i2c_add_driver(&unittest_i2c_mux_driver);
+
+	EXPECT_END(KERN_INFO,
+		   "i2c i2c-1: Added multiplexed i2c bus 2");
+
 	if (unittest(ret == 0,
 			"could not register unittest i2c mux driver\n"))
 		return ret;
@@ -2145,8 +2630,18 @@ static void of_unittest_overlay_i2c_cleanup(void)
 
 static void __init of_unittest_overlay_i2c_12(void)
 {
+	int ret;
+
 	/* device should enable */
-	if (of_unittest_apply_overlay_check(12, 12, 0, 1, I2C_OVERLAY))
+	EXPECT_BEGIN(KERN_INFO,
+		     "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/i2c-test-bus/test-unittest12/status");
+
+	ret = of_unittest_apply_overlay_check(12, 12, 0, 1, I2C_OVERLAY);
+
+	EXPECT_END(KERN_INFO,
+		   "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/i2c-test-bus/test-unittest12/status");
+
+	if (ret)
 		return;
 
 	unittest(1, "overlay test %d passed\n", 12);
@@ -2155,8 +2650,18 @@ static void __init of_unittest_overlay_i2c_12(void)
 /* test deactivation of device */
 static void __init of_unittest_overlay_i2c_13(void)
 {
+	int ret;
+
+	EXPECT_BEGIN(KERN_INFO,
+		     "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/i2c-test-bus/test-unittest13/status");
+
 	/* device should disable */
-	if (of_unittest_apply_overlay_check(13, 13, 1, 0, I2C_OVERLAY))
+	ret = of_unittest_apply_overlay_check(13, 13, 1, 0, I2C_OVERLAY);
+
+	EXPECT_END(KERN_INFO,
+		   "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/i2c-test-bus/test-unittest13/status");
+
+	if (ret)
 		return;
 
 	unittest(1, "overlay test %d passed\n", 13);
@@ -2169,8 +2674,18 @@ static void of_unittest_overlay_i2c_14(void)
 
 static void __init of_unittest_overlay_i2c_15(void)
 {
+	int ret;
+
 	/* device should enable */
-	if (of_unittest_apply_overlay_check(15, 15, 0, 1, I2C_OVERLAY))
+	EXPECT_BEGIN(KERN_INFO,
+		     "i2c i2c-1: Added multiplexed i2c bus 3");
+
+	ret = of_unittest_apply_overlay_check(15, 15, 0, 1, I2C_OVERLAY);
+
+	EXPECT_END(KERN_INFO,
+		   "i2c i2c-1: Added multiplexed i2c bus 3");
+
+	if (ret)
 		return;
 
 	unittest(1, "overlay test %d passed\n", 15);
@@ -2242,6 +2757,8 @@ static void __init of_unittest_overlay(void)
 	of_unittest_overlay_i2c_cleanup();
 #endif
 
+	of_unittest_overlay_gpio();
+
 	of_unittest_destroy_tracked_overlays();
 
 out:
@@ -2295,6 +2812,12 @@ OVERLAY_INFO_EXTERN(overlay_11);
 OVERLAY_INFO_EXTERN(overlay_12);
 OVERLAY_INFO_EXTERN(overlay_13);
 OVERLAY_INFO_EXTERN(overlay_15);
+OVERLAY_INFO_EXTERN(overlay_gpio_01);
+OVERLAY_INFO_EXTERN(overlay_gpio_02a);
+OVERLAY_INFO_EXTERN(overlay_gpio_02b);
+OVERLAY_INFO_EXTERN(overlay_gpio_03);
+OVERLAY_INFO_EXTERN(overlay_gpio_04a);
+OVERLAY_INFO_EXTERN(overlay_gpio_04b);
 OVERLAY_INFO_EXTERN(overlay_bad_add_dup_node);
 OVERLAY_INFO_EXTERN(overlay_bad_add_dup_prop);
 OVERLAY_INFO_EXTERN(overlay_bad_phandle);
@@ -2319,6 +2842,12 @@ static struct overlay_info overlays[] = {
 	OVERLAY_INFO(overlay_12, 0),
 	OVERLAY_INFO(overlay_13, 0),
 	OVERLAY_INFO(overlay_15, 0),
+	OVERLAY_INFO(overlay_gpio_01, 0),
+	OVERLAY_INFO(overlay_gpio_02a, 0),
+	OVERLAY_INFO(overlay_gpio_02b, 0),
+	OVERLAY_INFO(overlay_gpio_03, 0),
+	OVERLAY_INFO(overlay_gpio_04a, 0),
+	OVERLAY_INFO(overlay_gpio_04b, 0),
 	OVERLAY_INFO(overlay_bad_add_dup_node, -EINVAL),
 	OVERLAY_INFO(overlay_bad_add_dup_prop, -EINVAL),
 	OVERLAY_INFO(overlay_bad_phandle, -EINVAL),
@@ -2470,6 +2999,7 @@ static __init void of_unittest_overlay_high_level(void)
 	struct device_node *overlay_base_symbols;
 	struct device_node **pprev;
 	struct property *prop;
+	int ret;
 
 	if (!overlay_base_root) {
 		unittest(0, "overlay_base_root not initialized\n");
@@ -2564,8 +3094,11 @@ static __init void of_unittest_overlay_high_level(void)
 				goto err_unlock;
 			}
 			if (__of_add_property(of_symbols, new_prop)) {
+				kfree(new_prop->name);
+				kfree(new_prop->value);
+				kfree(new_prop);
 				/* "name" auto-generated by unflatten */
-				if (!strcmp(new_prop->name, "name"))
+				if (!strcmp(prop->name, "name"))
 					continue;
 				unittest(0, "duplicate property '%s' in overlay_base node __symbols__",
 					 prop->name);
@@ -2584,15 +3117,86 @@ static __init void of_unittest_overlay_high_level(void)
 
 	/* now do the normal overlay usage test */
 
-	unittest(overlay_data_apply("overlay", NULL),
-		 "Adding overlay 'overlay' failed\n");
+	EXPECT_BEGIN(KERN_ERR,
+		     "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/substation@100/status");
+	EXPECT_BEGIN(KERN_ERR,
+		     "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/fairway-1/status");
+	EXPECT_BEGIN(KERN_ERR,
+		     "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/fairway-1/ride@100/track@30/incline-up");
+	EXPECT_BEGIN(KERN_ERR,
+		     "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/fairway-1/ride@100/track@40/incline-up");
+	EXPECT_BEGIN(KERN_ERR,
+		     "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/lights@40000/status");
+	EXPECT_BEGIN(KERN_ERR,
+		     "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/lights@40000/color");
+	EXPECT_BEGIN(KERN_ERR,
+		     "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/lights@40000/rate");
+	EXPECT_BEGIN(KERN_ERR,
+		     "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /__symbols__/hvac_2");
+	EXPECT_BEGIN(KERN_ERR,
+		     "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /__symbols__/ride_200");
+	EXPECT_BEGIN(KERN_ERR,
+		     "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /__symbols__/ride_200_left");
+	EXPECT_BEGIN(KERN_ERR,
+		     "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /__symbols__/ride_200_right");
+
+	ret = overlay_data_apply("overlay", NULL);
+
+	EXPECT_END(KERN_ERR,
+		   "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /__symbols__/ride_200_right");
+	EXPECT_END(KERN_ERR,
+		   "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /__symbols__/ride_200_left");
+	EXPECT_END(KERN_ERR,
+		   "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /__symbols__/ride_200");
+	EXPECT_END(KERN_ERR,
+		   "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /__symbols__/hvac_2");
+	EXPECT_END(KERN_ERR,
+		   "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/lights@40000/rate");
+	EXPECT_END(KERN_ERR,
+		   "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/lights@40000/color");
+	EXPECT_END(KERN_ERR,
+		   "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/lights@40000/status");
+	EXPECT_END(KERN_ERR,
+		   "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/fairway-1/ride@100/track@40/incline-up");
+	EXPECT_END(KERN_ERR,
+		   "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/fairway-1/ride@100/track@30/incline-up");
+	EXPECT_END(KERN_ERR,
+		   "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/fairway-1/status");
+	EXPECT_END(KERN_ERR,
+		   "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/substation@100/status");
+
+	unittest(ret, "Adding overlay 'overlay' failed\n");
+
+	EXPECT_BEGIN(KERN_ERR,
+		     "OF: overlay: ERROR: multiple fragments add and/or delete node /testcase-data-2/substation@100/motor-1/controller");
+	EXPECT_BEGIN(KERN_ERR,
+		     "OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/controller/name");
 
 	unittest(overlay_data_apply("overlay_bad_add_dup_node", NULL),
 		 "Adding overlay 'overlay_bad_add_dup_node' failed\n");
 
+	EXPECT_END(KERN_ERR,
+		   "OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/controller/name");
+	EXPECT_END(KERN_ERR,
+		   "OF: overlay: ERROR: multiple fragments add and/or delete node /testcase-data-2/substation@100/motor-1/controller");
+
+	EXPECT_BEGIN(KERN_ERR,
+		     "OF: overlay: ERROR: multiple fragments add and/or delete node /testcase-data-2/substation@100/motor-1/electric");
+	EXPECT_BEGIN(KERN_ERR,
+		     "OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/electric/rpm_avail");
+	EXPECT_BEGIN(KERN_ERR,
+		     "OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/electric/name");
+
 	unittest(overlay_data_apply("overlay_bad_add_dup_prop", NULL),
 		 "Adding overlay 'overlay_bad_add_dup_prop' failed\n");
 
+	EXPECT_END(KERN_ERR,
+		     "OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/electric/name");
+	EXPECT_END(KERN_ERR,
+		     "OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/electric/rpm_avail");
+	EXPECT_END(KERN_ERR,
+		     "OF: overlay: ERROR: multiple fragments add and/or delete node /testcase-data-2/substation@100/motor-1/electric");
+
 	unittest(overlay_data_apply("overlay_bad_phandle", NULL),
 		 "Adding overlay 'overlay_bad_phandle' failed\n");
 
@@ -2616,6 +3220,8 @@ static int __init of_unittest(void)
 	struct device_node *np;
 	int res;
 
+	pr_info("start of unittest - you will see error messages\n");
+
 	/* adding data for unittest */
 
 	if (IS_ENABLED(CONFIG_UML))
@@ -2634,7 +3240,6 @@ static int __init of_unittest(void)
 	}
 	of_node_put(np);
 
-	pr_info("start of unittest - you will see error messages\n");
 	of_unittest_check_tree_linkage();
 	of_unittest_check_phandles();
 	of_unittest_find_node_by_name();
diff --git a/drivers/opp/core.c b/drivers/opp/core.c
index ba43e6a..e4f01e7 100644
--- a/drivers/opp/core.c
+++ b/drivers/opp/core.c
@@ -819,6 +819,8 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
 	if (unlikely(!target_freq)) {
 		if (opp_table->required_opp_tables) {
 			ret = _set_required_opps(dev, opp_table, NULL);
+		} else if (!_get_opp_count(opp_table)) {
+			return 0;
 		} else {
 			dev_err(dev, "target frequency can't be 0\n");
 			ret = -EINVAL;
@@ -849,6 +851,18 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
 		goto put_opp_table;
 	}
 
+	/*
+	 * For IO devices which require an OPP on some platforms/SoCs
+	 * while just needing to scale the clock on some others
+	 * we look for empty OPP tables with just a clock handle and
+	 * scale only the clk. This makes dev_pm_opp_set_rate()
+	 * equivalent to a clk_set_rate()
+	 */
+	if (!_get_opp_count(opp_table)) {
+		ret = _generic_set_opp_clk_only(dev, clk, freq);
+		goto put_opp_table;
+	}
+
 	temp_freq = old_freq;
 	old_opp = _find_freq_ceil(opp_table, &temp_freq);
 	if (IS_ERR(old_opp)) {
diff --git a/drivers/parisc/eisa.c b/drivers/parisc/eisa.c
index 9d00a24..f96e5ea 100644
--- a/drivers/parisc/eisa.c
+++ b/drivers/parisc/eisa.c
@@ -243,11 +243,6 @@ static irqreturn_t dummy_irq2_handler(int _, void *dev)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction irq2_action = {
-	.handler = dummy_irq2_handler,
-	.name = "cascade",
-};
-
 static void init_eisa_pic(void)
 {
 	unsigned long flags;
@@ -335,7 +330,8 @@ static int __init eisa_probe(struct parisc_device *dev)
 	}
 
 	/* Reserve IRQ2 */
-	setup_irq(2, &irq2_action);
+	if (request_irq(2, dummy_irq2_handler, 0, "cascade", NULL))
+		pr_err("Failed to request irq 2 (cascade)\n");
 	for (i = 0; i < 16; i++) {
 		irq_set_chip_and_handler(i, &eisa_interrupt_type,
 					 handle_simple_irq);
diff --git a/drivers/pci/ats.c b/drivers/pci/ats.c
index 3ef0bb2..390e92f 100644
--- a/drivers/pci/ats.c
+++ b/drivers/pci/ats.c
@@ -366,6 +366,7 @@ int pci_enable_pasid(struct pci_dev *pdev, int features)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(pci_enable_pasid);
 
 /**
  * pci_disable_pasid - Disable the PASID capability
@@ -390,6 +391,7 @@ void pci_disable_pasid(struct pci_dev *pdev)
 
 	pdev->pasid_enabled = 0;
 }
+EXPORT_SYMBOL_GPL(pci_disable_pasid);
 
 /**
  * pci_restore_pasid_state - Restore PASID capabilities
@@ -441,6 +443,7 @@ int pci_pasid_features(struct pci_dev *pdev)
 
 	return supported;
 }
+EXPORT_SYMBOL_GPL(pci_pasid_features);
 
 #define PASID_NUMBER_SHIFT	8
 #define PASID_NUMBER_MASK	(0x1f << PASID_NUMBER_SHIFT)
@@ -469,4 +472,5 @@ int pci_max_pasids(struct pci_dev *pdev)
 
 	return (1 << supported);
 }
+EXPORT_SYMBOL_GPL(pci_max_pasids);
 #endif /* CONFIG_PCI_PASID */
diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index 20bf00f..91bfdb7 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -213,16 +213,6 @@
 	  Say Y here if you want to enable PCIe controller support on
 	  MediaTek SoCs.
 
-config PCIE_MOBIVEIL
-	bool "Mobiveil AXI PCIe controller"
-	depends on ARCH_ZYNQMP || COMPILE_TEST
-	depends on OF
-	depends on PCI_MSI_IRQ_DOMAIN
-	help
-	  Say Y here if you want to enable support for the Mobiveil AXI PCIe
-	  Soft IP. It has up to 8 outbound and inbound windows
-	  for address translation and it is a PCIe Gen4 IP.
-
 config PCIE_TANGO_SMP8759
 	bool "Tango SMP8759 PCIe controller (DANGEROUS)"
 	depends on ARCH_TANGO && PCI_MSI && OF
@@ -269,5 +259,6 @@
 	  have a common interface with the Hyper-V PCI frontend driver.
 
 source "drivers/pci/controller/dwc/Kconfig"
+source "drivers/pci/controller/mobiveil/Kconfig"
 source "drivers/pci/controller/cadence/Kconfig"
 endmenu
diff --git a/drivers/pci/controller/Makefile b/drivers/pci/controller/Makefile
index 01b2502..158c597 100644
--- a/drivers/pci/controller/Makefile
+++ b/drivers/pci/controller/Makefile
@@ -25,12 +25,12 @@
 obj-$(CONFIG_PCIE_ROCKCHIP_EP) += pcie-rockchip-ep.o
 obj-$(CONFIG_PCIE_ROCKCHIP_HOST) += pcie-rockchip-host.o
 obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o
-obj-$(CONFIG_PCIE_MOBIVEIL) += pcie-mobiveil.o
 obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o
 obj-$(CONFIG_VMD) += vmd.o
 obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb.o
 # pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW
 obj-y				+= dwc/
+obj-y				+= mobiveil/
 
 
 # The following drivers are for devices that use the generic ACPI
diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
index 0830dfc..03dcaf6 100644
--- a/drivers/pci/controller/dwc/Kconfig
+++ b/drivers/pci/controller/dwc/Kconfig
@@ -248,14 +248,37 @@
 	  implement the driver.
 
 config PCIE_TEGRA194
-	tristate "NVIDIA Tegra194 (and later) PCIe controller"
+	tristate
+
+config PCIE_TEGRA194_HOST
+	tristate "NVIDIA Tegra194 (and later) PCIe controller - Host Mode"
 	depends on ARCH_TEGRA_194_SOC || COMPILE_TEST
 	depends on PCI_MSI_IRQ_DOMAIN
 	select PCIE_DW_HOST
 	select PHY_TEGRA194_P2U
+	select PCIE_TEGRA194
 	help
-	  Say Y here if you want support for DesignWare core based PCIe host
-	  controller found in NVIDIA Tegra194 SoC.
+	  Enables support for the PCIe controller in the NVIDIA Tegra194 SoC to
+	  work in host mode. There are two instances of PCIe controllers in
+	  Tegra194. This controller can work either as EP or RC. In order to
+	  enable host-specific features PCIE_TEGRA194_HOST must be selected and
+	  in order to enable device-specific features PCIE_TEGRA194_EP must be
+	  selected. This uses the DesignWare core.
+
+config PCIE_TEGRA194_EP
+	tristate "NVIDIA Tegra194 (and later) PCIe controller - Endpoint Mode"
+	depends on ARCH_TEGRA_194_SOC || COMPILE_TEST
+	depends on PCI_ENDPOINT
+	select PCIE_DW_EP
+	select PHY_TEGRA194_P2U
+	select PCIE_TEGRA194
+	help
+	  Enables support for the PCIe controller in the NVIDIA Tegra194 SoC to
+	  work in host mode. There are two instances of PCIe controllers in
+	  Tegra194. This controller can work either as EP or RC. In order to
+	  enable host-specific features PCIE_TEGRA194_HOST must be selected and
+	  in order to enable device-specific features PCIE_TEGRA194_EP must be
+	  selected. This uses the DesignWare core.
 
 config PCIE_UNIPHIER
 	bool "Socionext UniPhier PCIe controllers"
diff --git a/drivers/pci/controller/dwc/pci-dra7xx.c b/drivers/pci/controller/dwc/pci-dra7xx.c
index 9bf7fa9..3b0e58f 100644
--- a/drivers/pci/controller/dwc/pci-dra7xx.c
+++ b/drivers/pci/controller/dwc/pci-dra7xx.c
@@ -215,10 +215,6 @@ static int dra7xx_pcie_host_init(struct pcie_port *pp)
 	return 0;
 }
 
-static const struct dw_pcie_host_ops dra7xx_pcie_host_ops = {
-	.host_init = dra7xx_pcie_host_init,
-};
-
 static int dra7xx_pcie_intx_map(struct irq_domain *domain, unsigned int irq,
 				irq_hw_number_t hwirq)
 {
@@ -233,43 +229,77 @@ static const struct irq_domain_ops intx_domain_ops = {
 	.xlate = pci_irqd_intx_xlate,
 };
 
-static int dra7xx_pcie_init_irq_domain(struct pcie_port *pp)
+static int dra7xx_pcie_handle_msi(struct pcie_port *pp, int index)
 {
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
-	struct device *dev = pci->dev;
-	struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pci);
-	struct device_node *node = dev->of_node;
-	struct device_node *pcie_intc_node =  of_get_next_child(node, NULL);
+	unsigned long val;
+	int pos, irq;
 
-	if (!pcie_intc_node) {
-		dev_err(dev, "No PCIe Intc node found\n");
-		return -ENODEV;
+	val = dw_pcie_readl_dbi(pci, PCIE_MSI_INTR0_STATUS +
+				   (index * MSI_REG_CTRL_BLOCK_SIZE));
+	if (!val)
+		return 0;
+
+	pos = find_next_bit(&val, MAX_MSI_IRQS_PER_CTRL, 0);
+	while (pos != MAX_MSI_IRQS_PER_CTRL) {
+		irq = irq_find_mapping(pp->irq_domain,
+				       (index * MAX_MSI_IRQS_PER_CTRL) + pos);
+		generic_handle_irq(irq);
+		pos++;
+		pos = find_next_bit(&val, MAX_MSI_IRQS_PER_CTRL, pos);
 	}
 
-	dra7xx->irq_domain = irq_domain_add_linear(pcie_intc_node, PCI_NUM_INTX,
-						   &intx_domain_ops, pp);
-	of_node_put(pcie_intc_node);
-	if (!dra7xx->irq_domain) {
-		dev_err(dev, "Failed to get a INTx IRQ domain\n");
-		return -ENODEV;
-	}
-
-	return 0;
+	return 1;
 }
 
-static irqreturn_t dra7xx_pcie_msi_irq_handler(int irq, void *arg)
+static void dra7xx_pcie_handle_msi_irq(struct pcie_port *pp)
 {
-	struct dra7xx_pcie *dra7xx = arg;
-	struct dw_pcie *pci = dra7xx->pci;
-	struct pcie_port *pp = &pci->pp;
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	int ret, i, count, num_ctrls;
+
+	num_ctrls = pp->num_vectors / MAX_MSI_IRQS_PER_CTRL;
+
+	/**
+	 * Need to make sure all MSI status bits read 0 before exiting.
+	 * Else, new MSI IRQs are not registered by the wrapper. Have an
+	 * upperbound for the loop and exit the IRQ in case of IRQ flood
+	 * to avoid locking up system in interrupt context.
+	 */
+	count = 0;
+	do {
+		ret = 0;
+
+		for (i = 0; i < num_ctrls; i++)
+			ret |= dra7xx_pcie_handle_msi(pp, i);
+		count++;
+	} while (ret && count <= 1000);
+
+	if (count > 1000)
+		dev_warn_ratelimited(pci->dev,
+				     "Too many MSI IRQs to handle\n");
+}
+
+static void dra7xx_pcie_msi_irq_handler(struct irq_desc *desc)
+{
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	struct dra7xx_pcie *dra7xx;
+	struct dw_pcie *pci;
+	struct pcie_port *pp;
 	unsigned long reg;
 	u32 virq, bit;
 
+	chained_irq_enter(chip, desc);
+
+	pp = irq_desc_get_handler_data(desc);
+	pci = to_dw_pcie_from_pp(pp);
+	dra7xx = to_dra7xx_pcie(pci);
+
 	reg = dra7xx_pcie_readl(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI);
+	dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI, reg);
 
 	switch (reg) {
 	case MSI:
-		dw_handle_msi_irq(pp);
+		dra7xx_pcie_handle_msi_irq(pp);
 		break;
 	case INTA:
 	case INTB:
@@ -283,9 +313,7 @@ static irqreturn_t dra7xx_pcie_msi_irq_handler(int irq, void *arg)
 		break;
 	}
 
-	dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI, reg);
-
-	return IRQ_HANDLED;
+	chained_irq_exit(chip, desc);
 }
 
 static irqreturn_t dra7xx_pcie_irq_handler(int irq, void *arg)
@@ -347,6 +375,145 @@ static irqreturn_t dra7xx_pcie_irq_handler(int irq, void *arg)
 	return IRQ_HANDLED;
 }
 
+static int dra7xx_pcie_init_irq_domain(struct pcie_port *pp)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	struct device *dev = pci->dev;
+	struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pci);
+	struct device_node *node = dev->of_node;
+	struct device_node *pcie_intc_node =  of_get_next_child(node, NULL);
+
+	if (!pcie_intc_node) {
+		dev_err(dev, "No PCIe Intc node found\n");
+		return -ENODEV;
+	}
+
+	irq_set_chained_handler_and_data(pp->irq, dra7xx_pcie_msi_irq_handler,
+					 pp);
+	dra7xx->irq_domain = irq_domain_add_linear(pcie_intc_node, PCI_NUM_INTX,
+						   &intx_domain_ops, pp);
+	of_node_put(pcie_intc_node);
+	if (!dra7xx->irq_domain) {
+		dev_err(dev, "Failed to get a INTx IRQ domain\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static void dra7xx_pcie_setup_msi_msg(struct irq_data *d, struct msi_msg *msg)
+{
+	struct pcie_port *pp = irq_data_get_irq_chip_data(d);
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	u64 msi_target;
+
+	msi_target = (u64)pp->msi_data;
+
+	msg->address_lo = lower_32_bits(msi_target);
+	msg->address_hi = upper_32_bits(msi_target);
+
+	msg->data = d->hwirq;
+
+	dev_dbg(pci->dev, "msi#%d address_hi %#x address_lo %#x\n",
+		(int)d->hwirq, msg->address_hi, msg->address_lo);
+}
+
+static int dra7xx_pcie_msi_set_affinity(struct irq_data *d,
+					const struct cpumask *mask,
+					bool force)
+{
+	return -EINVAL;
+}
+
+static void dra7xx_pcie_bottom_mask(struct irq_data *d)
+{
+	struct pcie_port *pp = irq_data_get_irq_chip_data(d);
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	unsigned int res, bit, ctrl;
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&pp->lock, flags);
+
+	ctrl = d->hwirq / MAX_MSI_IRQS_PER_CTRL;
+	res = ctrl * MSI_REG_CTRL_BLOCK_SIZE;
+	bit = d->hwirq % MAX_MSI_IRQS_PER_CTRL;
+
+	pp->irq_mask[ctrl] |= BIT(bit);
+	dw_pcie_writel_dbi(pci, PCIE_MSI_INTR0_MASK + res,
+			   pp->irq_mask[ctrl]);
+
+	raw_spin_unlock_irqrestore(&pp->lock, flags);
+}
+
+static void dra7xx_pcie_bottom_unmask(struct irq_data *d)
+{
+	struct pcie_port *pp = irq_data_get_irq_chip_data(d);
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	unsigned int res, bit, ctrl;
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&pp->lock, flags);
+
+	ctrl = d->hwirq / MAX_MSI_IRQS_PER_CTRL;
+	res = ctrl * MSI_REG_CTRL_BLOCK_SIZE;
+	bit = d->hwirq % MAX_MSI_IRQS_PER_CTRL;
+
+	pp->irq_mask[ctrl] &= ~BIT(bit);
+	dw_pcie_writel_dbi(pci, PCIE_MSI_INTR0_MASK + res,
+			   pp->irq_mask[ctrl]);
+
+	raw_spin_unlock_irqrestore(&pp->lock, flags);
+}
+
+static void dra7xx_pcie_bottom_ack(struct irq_data *d)
+{
+	struct pcie_port *pp  = irq_data_get_irq_chip_data(d);
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	unsigned int res, bit, ctrl;
+
+	ctrl = d->hwirq / MAX_MSI_IRQS_PER_CTRL;
+	res = ctrl * MSI_REG_CTRL_BLOCK_SIZE;
+	bit = d->hwirq % MAX_MSI_IRQS_PER_CTRL;
+
+	dw_pcie_writel_dbi(pci, PCIE_MSI_INTR0_STATUS + res, BIT(bit));
+}
+
+static struct irq_chip dra7xx_pci_msi_bottom_irq_chip = {
+	.name = "DRA7XX-PCI-MSI",
+	.irq_ack = dra7xx_pcie_bottom_ack,
+	.irq_compose_msi_msg = dra7xx_pcie_setup_msi_msg,
+	.irq_set_affinity = dra7xx_pcie_msi_set_affinity,
+	.irq_mask = dra7xx_pcie_bottom_mask,
+	.irq_unmask = dra7xx_pcie_bottom_unmask,
+};
+
+static int dra7xx_pcie_msi_host_init(struct pcie_port *pp)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	u32 ctrl, num_ctrls;
+
+	pp->msi_irq_chip = &dra7xx_pci_msi_bottom_irq_chip;
+
+	num_ctrls = pp->num_vectors / MAX_MSI_IRQS_PER_CTRL;
+	/* Initialize IRQ Status array */
+	for (ctrl = 0; ctrl < num_ctrls; ctrl++) {
+		pp->irq_mask[ctrl] = ~0;
+		dw_pcie_writel_dbi(pci, PCIE_MSI_INTR0_MASK +
+				    (ctrl * MSI_REG_CTRL_BLOCK_SIZE),
+				    pp->irq_mask[ctrl]);
+		dw_pcie_writel_dbi(pci, PCIE_MSI_INTR0_ENABLE +
+				    (ctrl * MSI_REG_CTRL_BLOCK_SIZE),
+				    ~0);
+	}
+
+	return dw_pcie_allocate_domains(pp);
+}
+
+static const struct dw_pcie_host_ops dra7xx_pcie_host_ops = {
+	.host_init = dra7xx_pcie_host_init,
+	.msi_host_init = dra7xx_pcie_msi_host_init,
+};
+
 static void dra7xx_pcie_ep_init(struct dw_pcie_ep *ep)
 {
 	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
@@ -467,14 +634,6 @@ static int __init dra7xx_add_pcie_port(struct dra7xx_pcie *dra7xx,
 		return pp->irq;
 	}
 
-	ret = devm_request_irq(dev, pp->irq, dra7xx_pcie_msi_irq_handler,
-			       IRQF_SHARED | IRQF_NO_THREAD,
-			       "dra7-pcie-msi",	dra7xx);
-	if (ret) {
-		dev_err(dev, "failed to request irq\n");
-		return ret;
-	}
-
 	ret = dra7xx_pcie_init_irq_domain(pp);
 	if (ret < 0)
 		return ret;
diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index c8c702c..790679f 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -959,6 +959,9 @@ static int ks_pcie_am654_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
 	case PCI_EPC_IRQ_MSI:
 		dw_pcie_ep_raise_msi_irq(ep, func_no, interrupt_num);
 		break;
+	case PCI_EPC_IRQ_MSIX:
+		dw_pcie_ep_raise_msix_irq(ep, func_no, interrupt_num);
+		break;
 	default:
 		dev_err(pci->dev, "UNKNOWN IRQ type\n");
 		return -EINVAL;
@@ -970,7 +973,7 @@ static int ks_pcie_am654_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
 static const struct pci_epc_features ks_pcie_am654_epc_features = {
 	.linkup_notifier = false,
 	.msi_capable = true,
-	.msix_capable = false,
+	.msix_capable = true,
 	.reserved_bar = 1 << BAR_0 | 1 << BAR_1,
 	.bar_fixed_64bit = 1 << BAR_0,
 	.bar_fixed_size[2] = SZ_1M,
diff --git a/drivers/pci/controller/dwc/pci-meson.c b/drivers/pci/controller/dwc/pci-meson.c
index 3772b02..3715dce 100644
--- a/drivers/pci/controller/dwc/pci-meson.c
+++ b/drivers/pci/controller/dwc/pci-meson.c
@@ -66,7 +66,6 @@
 #define PORT_CLK_RATE			100000000UL
 #define MAX_PAYLOAD_SIZE		256
 #define MAX_READ_REQ_SIZE		256
-#define MESON_PCIE_PHY_POWERUP		0x1c
 #define PCIE_RESET_DELAY		500
 #define PCIE_SHARED_RESET		1
 #define PCIE_NORMAL_RESET		0
@@ -81,26 +80,19 @@ enum pcie_data_rate {
 struct meson_pcie_mem_res {
 	void __iomem *elbi_base;
 	void __iomem *cfg_base;
-	void __iomem *phy_base;
 };
 
 struct meson_pcie_clk_res {
 	struct clk *clk;
-	struct clk *mipi_gate;
 	struct clk *port_clk;
 	struct clk *general_clk;
 };
 
 struct meson_pcie_rc_reset {
-	struct reset_control *phy;
 	struct reset_control *port;
 	struct reset_control *apb;
 };
 
-struct meson_pcie_param {
-	bool has_shared_phy;
-};
-
 struct meson_pcie {
 	struct dw_pcie pci;
 	struct meson_pcie_mem_res mem_res;
@@ -108,7 +100,6 @@ struct meson_pcie {
 	struct meson_pcie_rc_reset mrst;
 	struct gpio_desc *reset_gpio;
 	struct phy *phy;
-	const struct meson_pcie_param *param;
 };
 
 static struct reset_control *meson_pcie_get_reset(struct meson_pcie *mp,
@@ -130,13 +121,6 @@ static int meson_pcie_get_resets(struct meson_pcie *mp)
 {
 	struct meson_pcie_rc_reset *mrst = &mp->mrst;
 
-	if (!mp->param->has_shared_phy) {
-		mrst->phy = meson_pcie_get_reset(mp, "phy", PCIE_SHARED_RESET);
-		if (IS_ERR(mrst->phy))
-			return PTR_ERR(mrst->phy);
-		reset_control_deassert(mrst->phy);
-	}
-
 	mrst->port = meson_pcie_get_reset(mp, "port", PCIE_NORMAL_RESET);
 	if (IS_ERR(mrst->port))
 		return PTR_ERR(mrst->port);
@@ -162,22 +146,6 @@ static void __iomem *meson_pcie_get_mem(struct platform_device *pdev,
 	return devm_ioremap_resource(dev, res);
 }
 
-static void __iomem *meson_pcie_get_mem_shared(struct platform_device *pdev,
-					       struct meson_pcie *mp,
-					       const char *id)
-{
-	struct device *dev = mp->pci.dev;
-	struct resource *res;
-
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, id);
-	if (!res) {
-		dev_err(dev, "No REG resource %s\n", id);
-		return ERR_PTR(-ENXIO);
-	}
-
-	return devm_ioremap(dev, res->start, resource_size(res));
-}
-
 static int meson_pcie_get_mems(struct platform_device *pdev,
 			       struct meson_pcie *mp)
 {
@@ -189,14 +157,6 @@ static int meson_pcie_get_mems(struct platform_device *pdev,
 	if (IS_ERR(mp->mem_res.cfg_base))
 		return PTR_ERR(mp->mem_res.cfg_base);
 
-	/* Meson AXG SoC has two PCI controllers use same phy register */
-	if (!mp->param->has_shared_phy) {
-		mp->mem_res.phy_base =
-			meson_pcie_get_mem_shared(pdev, mp, "phy");
-		if (IS_ERR(mp->mem_res.phy_base))
-			return PTR_ERR(mp->mem_res.phy_base);
-	}
-
 	return 0;
 }
 
@@ -204,37 +164,33 @@ static int meson_pcie_power_on(struct meson_pcie *mp)
 {
 	int ret = 0;
 
-	if (mp->param->has_shared_phy) {
-		ret = phy_init(mp->phy);
-		if (ret)
-			return ret;
+	ret = phy_init(mp->phy);
+	if (ret)
+		return ret;
 
-		ret = phy_power_on(mp->phy);
-		if (ret) {
-			phy_exit(mp->phy);
-			return ret;
-		}
-	} else
-		writel(MESON_PCIE_PHY_POWERUP, mp->mem_res.phy_base);
+	ret = phy_power_on(mp->phy);
+	if (ret) {
+		phy_exit(mp->phy);
+		return ret;
+	}
 
 	return 0;
 }
 
+static void meson_pcie_power_off(struct meson_pcie *mp)
+{
+	phy_power_off(mp->phy);
+	phy_exit(mp->phy);
+}
+
 static int meson_pcie_reset(struct meson_pcie *mp)
 {
 	struct meson_pcie_rc_reset *mrst = &mp->mrst;
 	int ret = 0;
 
-	if (mp->param->has_shared_phy) {
-		ret = phy_reset(mp->phy);
-		if (ret)
-			return ret;
-	} else {
-		reset_control_assert(mrst->phy);
-		udelay(PCIE_RESET_DELAY);
-		reset_control_deassert(mrst->phy);
-		udelay(PCIE_RESET_DELAY);
-	}
+	ret = phy_reset(mp->phy);
+	if (ret)
+		return ret;
 
 	reset_control_assert(mrst->port);
 	reset_control_assert(mrst->apb);
@@ -286,12 +242,6 @@ static int meson_pcie_probe_clocks(struct meson_pcie *mp)
 	if (IS_ERR(res->port_clk))
 		return PTR_ERR(res->port_clk);
 
-	if (!mp->param->has_shared_phy) {
-		res->mipi_gate = meson_pcie_probe_clock(dev, "mipi", 0);
-		if (IS_ERR(res->mipi_gate))
-			return PTR_ERR(res->mipi_gate);
-	}
-
 	res->general_clk = meson_pcie_probe_clock(dev, "general", 0);
 	if (IS_ERR(res->general_clk))
 		return PTR_ERR(res->general_clk);
@@ -562,7 +512,6 @@ static const struct dw_pcie_ops dw_pcie_ops = {
 
 static int meson_pcie_probe(struct platform_device *pdev)
 {
-	const struct meson_pcie_param *match_data;
 	struct device *dev = &pdev->dev;
 	struct dw_pcie *pci;
 	struct meson_pcie *mp;
@@ -576,17 +525,10 @@ static int meson_pcie_probe(struct platform_device *pdev)
 	pci->dev = dev;
 	pci->ops = &dw_pcie_ops;
 
-	match_data = of_device_get_match_data(dev);
-	if (!match_data) {
-		dev_err(dev, "failed to get match data\n");
-		return -ENODEV;
-	}
-	mp->param = match_data;
-
-	if (mp->param->has_shared_phy) {
-		mp->phy = devm_phy_get(dev, "pcie");
-		if (IS_ERR(mp->phy))
-			return PTR_ERR(mp->phy);
+	mp->phy = devm_phy_get(dev, "pcie");
+	if (IS_ERR(mp->phy)) {
+		dev_err(dev, "get phy failed, %ld\n", PTR_ERR(mp->phy));
+		return PTR_ERR(mp->phy);
 	}
 
 	mp->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
@@ -636,30 +578,16 @@ static int meson_pcie_probe(struct platform_device *pdev)
 	return 0;
 
 err_phy:
-	if (mp->param->has_shared_phy) {
-		phy_power_off(mp->phy);
-		phy_exit(mp->phy);
-	}
-
+	meson_pcie_power_off(mp);
 	return ret;
 }
 
-static struct meson_pcie_param meson_pcie_axg_param = {
-	.has_shared_phy = false,
-};
-
-static struct meson_pcie_param meson_pcie_g12a_param = {
-	.has_shared_phy = true,
-};
-
 static const struct of_device_id meson_pcie_of_match[] = {
 	{
 		.compatible = "amlogic,axg-pcie",
-		.data = &meson_pcie_axg_param,
 	},
 	{
 		.compatible = "amlogic,g12a-pcie",
-		.data = &meson_pcie_g12a_param,
 	},
 	{},
 };
diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
index cfeccd7..1cdcbd1 100644
--- a/drivers/pci/controller/dwc/pcie-designware-ep.c
+++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
@@ -18,6 +18,15 @@ void dw_pcie_ep_linkup(struct dw_pcie_ep *ep)
 
 	pci_epc_linkup(epc);
 }
+EXPORT_SYMBOL_GPL(dw_pcie_ep_linkup);
+
+void dw_pcie_ep_init_notify(struct dw_pcie_ep *ep)
+{
+	struct pci_epc *epc = ep->epc;
+
+	pci_epc_init_notify(epc);
+}
+EXPORT_SYMBOL_GPL(dw_pcie_ep_init_notify);
 
 static void __dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum pci_barno bar,
 				   int flags)
@@ -125,6 +134,7 @@ static void dw_pcie_ep_clear_bar(struct pci_epc *epc, u8 func_no,
 
 	dw_pcie_disable_atu(pci, atu_index, DW_PCIE_REGION_INBOUND);
 	clear_bit(atu_index, ep->ib_window_map);
+	ep->epf_bar[bar] = NULL;
 }
 
 static int dw_pcie_ep_set_bar(struct pci_epc *epc, u8 func_no,
@@ -158,6 +168,7 @@ static int dw_pcie_ep_set_bar(struct pci_epc *epc, u8 func_no,
 		dw_pcie_writel_dbi(pci, reg + 4, 0);
 	}
 
+	ep->epf_bar[bar] = epf_bar;
 	dw_pcie_dbi_ro_wr_dis(pci);
 
 	return 0;
@@ -269,7 +280,8 @@ static int dw_pcie_ep_get_msix(struct pci_epc *epc, u8 func_no)
 	return val;
 }
 
-static int dw_pcie_ep_set_msix(struct pci_epc *epc, u8 func_no, u16 interrupts)
+static int dw_pcie_ep_set_msix(struct pci_epc *epc, u8 func_no, u16 interrupts,
+			       enum pci_barno bir, u32 offset)
 {
 	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
 	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
@@ -278,12 +290,22 @@ static int dw_pcie_ep_set_msix(struct pci_epc *epc, u8 func_no, u16 interrupts)
 	if (!ep->msix_cap)
 		return -EINVAL;
 
+	dw_pcie_dbi_ro_wr_en(pci);
+
 	reg = ep->msix_cap + PCI_MSIX_FLAGS;
 	val = dw_pcie_readw_dbi(pci, reg);
 	val &= ~PCI_MSIX_FLAGS_QSIZE;
 	val |= interrupts;
-	dw_pcie_dbi_ro_wr_en(pci);
 	dw_pcie_writew_dbi(pci, reg, val);
+
+	reg = ep->msix_cap + PCI_MSIX_TABLE;
+	val = offset | bir;
+	dw_pcie_writel_dbi(pci, reg, val);
+
+	reg = ep->msix_cap + PCI_MSIX_PBA;
+	val = (offset + (interrupts * PCI_MSIX_ENTRY_SIZE)) | bir;
+	dw_pcie_writel_dbi(pci, reg, val);
+
 	dw_pcie_dbi_ro_wr_dis(pci);
 
 	return 0;
@@ -409,55 +431,41 @@ int dw_pcie_ep_raise_msix_irq(struct dw_pcie_ep *ep, u8 func_no,
 			     u16 interrupt_num)
 {
 	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+	struct pci_epf_msix_tbl *msix_tbl;
 	struct pci_epc *epc = ep->epc;
-	u16 tbl_offset, bir;
-	u32 bar_addr_upper, bar_addr_lower;
-	u32 msg_addr_upper, msg_addr_lower;
+	struct pci_epf_bar *epf_bar;
 	u32 reg, msg_data, vec_ctrl;
-	u64 tbl_addr, msg_addr, reg_u64;
-	void __iomem *msix_tbl;
+	unsigned int aligned_offset;
+	u32 tbl_offset;
+	u64 msg_addr;
 	int ret;
+	u8 bir;
 
 	reg = ep->msix_cap + PCI_MSIX_TABLE;
 	tbl_offset = dw_pcie_readl_dbi(pci, reg);
 	bir = (tbl_offset & PCI_MSIX_TABLE_BIR);
 	tbl_offset &= PCI_MSIX_TABLE_OFFSET;
 
-	reg = PCI_BASE_ADDRESS_0 + (4 * bir);
-	bar_addr_upper = 0;
-	bar_addr_lower = dw_pcie_readl_dbi(pci, reg);
-	reg_u64 = (bar_addr_lower & PCI_BASE_ADDRESS_MEM_TYPE_MASK);
-	if (reg_u64 == PCI_BASE_ADDRESS_MEM_TYPE_64)
-		bar_addr_upper = dw_pcie_readl_dbi(pci, reg + 4);
+	epf_bar = ep->epf_bar[bir];
+	msix_tbl = epf_bar->addr;
+	msix_tbl = (struct pci_epf_msix_tbl *)((char *)msix_tbl + tbl_offset);
 
-	tbl_addr = ((u64) bar_addr_upper) << 32 | bar_addr_lower;
-	tbl_addr += (tbl_offset + ((interrupt_num - 1) * PCI_MSIX_ENTRY_SIZE));
-	tbl_addr &= PCI_BASE_ADDRESS_MEM_MASK;
-
-	msix_tbl = ioremap(ep->phys_base + tbl_addr,
-				   PCI_MSIX_ENTRY_SIZE);
-	if (!msix_tbl)
-		return -EINVAL;
-
-	msg_addr_lower = readl(msix_tbl + PCI_MSIX_ENTRY_LOWER_ADDR);
-	msg_addr_upper = readl(msix_tbl + PCI_MSIX_ENTRY_UPPER_ADDR);
-	msg_addr = ((u64) msg_addr_upper) << 32 | msg_addr_lower;
-	msg_data = readl(msix_tbl + PCI_MSIX_ENTRY_DATA);
-	vec_ctrl = readl(msix_tbl + PCI_MSIX_ENTRY_VECTOR_CTRL);
-
-	iounmap(msix_tbl);
+	msg_addr = msix_tbl[(interrupt_num - 1)].msg_addr;
+	msg_data = msix_tbl[(interrupt_num - 1)].msg_data;
+	vec_ctrl = msix_tbl[(interrupt_num - 1)].vector_ctrl;
 
 	if (vec_ctrl & PCI_MSIX_ENTRY_CTRL_MASKBIT) {
 		dev_dbg(pci->dev, "MSI-X entry ctrl set\n");
 		return -EPERM;
 	}
 
-	ret = dw_pcie_ep_map_addr(epc, func_no, ep->msi_mem_phys, msg_addr,
+	aligned_offset = msg_addr & (epc->mem->page_size - 1);
+	ret = dw_pcie_ep_map_addr(epc, func_no, ep->msi_mem_phys,  msg_addr,
 				  epc->mem->page_size);
 	if (ret)
 		return ret;
 
-	writel(msg_data, ep->msi_mem);
+	writel(msg_data, ep->msi_mem + aligned_offset);
 
 	dw_pcie_ep_unmap_addr(epc, func_no, ep->msi_mem_phys);
 
@@ -492,19 +500,54 @@ static unsigned int dw_pcie_ep_find_ext_capability(struct dw_pcie *pci, int cap)
 	return 0;
 }
 
+int dw_pcie_ep_init_complete(struct dw_pcie_ep *ep)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+	unsigned int offset;
+	unsigned int nbars;
+	u8 hdr_type;
+	u32 reg;
+	int i;
+
+	hdr_type = dw_pcie_readb_dbi(pci, PCI_HEADER_TYPE);
+	if (hdr_type != PCI_HEADER_TYPE_NORMAL) {
+		dev_err(pci->dev,
+			"PCIe controller is not set to EP mode (hdr_type:0x%x)!\n",
+			hdr_type);
+		return -EIO;
+	}
+
+	ep->msi_cap = dw_pcie_find_capability(pci, PCI_CAP_ID_MSI);
+
+	ep->msix_cap = dw_pcie_find_capability(pci, PCI_CAP_ID_MSIX);
+
+	offset = dw_pcie_ep_find_ext_capability(pci, PCI_EXT_CAP_ID_REBAR);
+	if (offset) {
+		reg = dw_pcie_readl_dbi(pci, offset + PCI_REBAR_CTRL);
+		nbars = (reg & PCI_REBAR_CTRL_NBAR_MASK) >>
+			PCI_REBAR_CTRL_NBAR_SHIFT;
+
+		dw_pcie_dbi_ro_wr_en(pci);
+		for (i = 0; i < nbars; i++, offset += PCI_REBAR_CTRL)
+			dw_pcie_writel_dbi(pci, offset + PCI_REBAR_CAP, 0x0);
+		dw_pcie_dbi_ro_wr_dis(pci);
+	}
+
+	dw_pcie_setup(pci);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(dw_pcie_ep_init_complete);
+
 int dw_pcie_ep_init(struct dw_pcie_ep *ep)
 {
-	int i;
 	int ret;
-	u32 reg;
 	void *addr;
-	u8 hdr_type;
-	unsigned int nbars;
-	unsigned int offset;
 	struct pci_epc *epc;
 	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
 	struct device *dev = pci->dev;
 	struct device_node *np = dev->of_node;
+	const struct pci_epc_features *epc_features;
 
 	if (!pci->dbi_base || !pci->dbi_base2) {
 		dev_err(dev, "dbi_base/dbi_base2 is not populated\n");
@@ -563,13 +606,6 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep)
 	if (ep->ops->ep_init)
 		ep->ops->ep_init(ep);
 
-	hdr_type = dw_pcie_readb_dbi(pci, PCI_HEADER_TYPE);
-	if (hdr_type != PCI_HEADER_TYPE_NORMAL) {
-		dev_err(pci->dev, "PCIe controller is not set to EP mode (hdr_type:0x%x)!\n",
-			hdr_type);
-		return -EIO;
-	}
-
 	ret = of_property_read_u8(np, "max-functions", &epc->max_functions);
 	if (ret < 0)
 		epc->max_functions = 1;
@@ -587,23 +623,13 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep)
 		dev_err(dev, "Failed to reserve memory for MSI/MSI-X\n");
 		return -ENOMEM;
 	}
-	ep->msi_cap = dw_pcie_find_capability(pci, PCI_CAP_ID_MSI);
 
-	ep->msix_cap = dw_pcie_find_capability(pci, PCI_CAP_ID_MSIX);
-
-	offset = dw_pcie_ep_find_ext_capability(pci, PCI_EXT_CAP_ID_REBAR);
-	if (offset) {
-		reg = dw_pcie_readl_dbi(pci, offset + PCI_REBAR_CTRL);
-		nbars = (reg & PCI_REBAR_CTRL_NBAR_MASK) >>
-			PCI_REBAR_CTRL_NBAR_SHIFT;
-
-		dw_pcie_dbi_ro_wr_en(pci);
-		for (i = 0; i < nbars; i++, offset += PCI_REBAR_CTRL)
-			dw_pcie_writel_dbi(pci, offset + PCI_REBAR_CAP, 0x0);
-		dw_pcie_dbi_ro_wr_dis(pci);
+	if (ep->ops->get_features) {
+		epc_features = ep->ops->get_features(ep);
+		if (epc_features->core_init_notifier)
+			return 0;
 	}
 
-	dw_pcie_setup(pci);
-
-	return 0;
+	return dw_pcie_ep_init_complete(ep);
 }
+EXPORT_SYMBOL_GPL(dw_pcie_ep_init);
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index a22ea59..d6e1f39 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -233,6 +233,7 @@ struct dw_pcie_ep {
 	phys_addr_t		msi_mem_phys;
 	u8			msi_cap;	/* MSI capability offset */
 	u8			msix_cap;	/* MSI-X capability offset */
+	struct pci_epf_bar	*epf_bar[PCI_STD_NUM_BARS];
 };
 
 struct dw_pcie_ops {
@@ -411,6 +412,8 @@ static inline int dw_pcie_allocate_domains(struct pcie_port *pp)
 #ifdef CONFIG_PCIE_DW_EP
 void dw_pcie_ep_linkup(struct dw_pcie_ep *ep);
 int dw_pcie_ep_init(struct dw_pcie_ep *ep);
+int dw_pcie_ep_init_complete(struct dw_pcie_ep *ep);
+void dw_pcie_ep_init_notify(struct dw_pcie_ep *ep);
 void dw_pcie_ep_exit(struct dw_pcie_ep *ep);
 int dw_pcie_ep_raise_legacy_irq(struct dw_pcie_ep *ep, u8 func_no);
 int dw_pcie_ep_raise_msi_irq(struct dw_pcie_ep *ep, u8 func_no,
@@ -428,6 +431,15 @@ static inline int dw_pcie_ep_init(struct dw_pcie_ep *ep)
 	return 0;
 }
 
+static inline int dw_pcie_ep_init_complete(struct dw_pcie_ep *ep)
+{
+	return 0;
+}
+
+static inline void dw_pcie_ep_init_notify(struct dw_pcie_ep *ep)
+{
+}
+
 static inline void dw_pcie_ep_exit(struct dw_pcie_ep *ep)
 {
 }
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 5ea527a..138e1a2 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -1439,7 +1439,13 @@ static void qcom_fixup_class(struct pci_dev *dev)
 {
 	dev->class = PCI_CLASS_BRIDGE_PCI << 8;
 }
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, PCI_ANY_ID, qcom_fixup_class);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0101, qcom_fixup_class);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0104, qcom_fixup_class);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0106, qcom_fixup_class);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0107, qcom_fixup_class);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0302, qcom_fixup_class);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x1000, qcom_fixup_class);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x1001, qcom_fixup_class);
 
 static struct platform_driver qcom_pcie_driver = {
 	.probe = qcom_pcie_probe,
diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
index cbe95f0..ae30a2f 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -11,6 +11,7 @@
 #include <linux/debugfs.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/interrupt.h>
 #include <linux/iopoll.h>
 #include <linux/kernel.h>
@@ -53,6 +54,7 @@
 #define APPL_INTR_EN_L0_0_LINK_STATE_INT_EN	BIT(0)
 #define APPL_INTR_EN_L0_0_MSI_RCV_INT_EN	BIT(4)
 #define APPL_INTR_EN_L0_0_INT_INT_EN		BIT(8)
+#define APPL_INTR_EN_L0_0_PCI_CMD_EN_INT_EN	BIT(15)
 #define APPL_INTR_EN_L0_0_CDM_REG_CHK_INT_EN	BIT(19)
 #define APPL_INTR_EN_L0_0_SYS_INTR_EN		BIT(30)
 #define APPL_INTR_EN_L0_0_SYS_MSI_INTR_EN	BIT(31)
@@ -60,19 +62,26 @@
 #define APPL_INTR_STATUS_L0			0xC
 #define APPL_INTR_STATUS_L0_LINK_STATE_INT	BIT(0)
 #define APPL_INTR_STATUS_L0_INT_INT		BIT(8)
+#define APPL_INTR_STATUS_L0_PCI_CMD_EN_INT	BIT(15)
+#define APPL_INTR_STATUS_L0_PEX_RST_INT		BIT(16)
 #define APPL_INTR_STATUS_L0_CDM_REG_CHK_INT	BIT(18)
 
 #define APPL_INTR_EN_L1_0_0				0x1C
 #define APPL_INTR_EN_L1_0_0_LINK_REQ_RST_NOT_INT_EN	BIT(1)
+#define APPL_INTR_EN_L1_0_0_RDLH_LINK_UP_INT_EN		BIT(3)
+#define APPL_INTR_EN_L1_0_0_HOT_RESET_DONE_INT_EN	BIT(30)
 
 #define APPL_INTR_STATUS_L1_0_0				0x20
 #define APPL_INTR_STATUS_L1_0_0_LINK_REQ_RST_NOT_CHGED	BIT(1)
+#define APPL_INTR_STATUS_L1_0_0_RDLH_LINK_UP_CHGED	BIT(3)
+#define APPL_INTR_STATUS_L1_0_0_HOT_RESET_DONE		BIT(30)
 
 #define APPL_INTR_STATUS_L1_1			0x2C
 #define APPL_INTR_STATUS_L1_2			0x30
 #define APPL_INTR_STATUS_L1_3			0x34
 #define APPL_INTR_STATUS_L1_6			0x3C
 #define APPL_INTR_STATUS_L1_7			0x40
+#define APPL_INTR_STATUS_L1_15_CFG_BME_CHGED	BIT(1)
 
 #define APPL_INTR_EN_L1_8_0			0x44
 #define APPL_INTR_EN_L1_8_BW_MGT_INT_EN		BIT(2)
@@ -103,8 +112,12 @@
 #define APPL_INTR_STATUS_L1_18_CDM_REG_CHK_CMP_ERR	BIT(1)
 #define APPL_INTR_STATUS_L1_18_CDM_REG_CHK_LOGIC_ERR	BIT(0)
 
+#define APPL_MSI_CTRL_1				0xAC
+
 #define APPL_MSI_CTRL_2				0xB0
 
+#define APPL_LEGACY_INTX			0xB8
+
 #define APPL_LTR_MSG_1				0xC4
 #define LTR_MSG_REQ				BIT(15)
 #define LTR_MST_NO_SNOOP_SHIFT			16
@@ -205,6 +218,13 @@
 #define AMBA_ERROR_RESPONSE_CRS_OKAY_FFFFFFFF	1
 #define AMBA_ERROR_RESPONSE_CRS_OKAY_FFFF0001	2
 
+#define MSIX_ADDR_MATCH_LOW_OFF			0x940
+#define MSIX_ADDR_MATCH_LOW_OFF_EN		BIT(0)
+#define MSIX_ADDR_MATCH_LOW_OFF_MASK		GENMASK(31, 2)
+
+#define MSIX_ADDR_MATCH_HIGH_OFF		0x944
+#define MSIX_ADDR_MATCH_HIGH_OFF_MASK		GENMASK(31, 0)
+
 #define PORT_LOGIC_MSIX_DOORBELL			0x948
 
 #define CAP_SPCIE_CAP_OFF			0x154
@@ -223,6 +243,13 @@
 #define GEN3_CORE_CLK_FREQ	250000000
 #define GEN4_CORE_CLK_FREQ	500000000
 
+#define LTR_MSG_TIMEOUT		(100 * 1000)
+
+#define PERST_DEBOUNCE_TIME	(5 * 1000)
+
+#define EP_STATE_DISABLED	0
+#define EP_STATE_ENABLED	1
+
 static const unsigned int pcie_gen_freq[] = {
 	GEN1_CORE_CLK_FREQ,
 	GEN2_CORE_CLK_FREQ,
@@ -260,6 +287,8 @@ struct tegra_pcie_dw {
 	struct dw_pcie pci;
 	struct tegra_bpmp *bpmp;
 
+	enum dw_pcie_device_mode mode;
+
 	bool supports_clkreq;
 	bool enable_cdm_check;
 	bool link_state;
@@ -283,6 +312,16 @@ struct tegra_pcie_dw {
 	struct phy **phys;
 
 	struct dentry *debugfs;
+
+	/* Endpoint mode specific */
+	struct gpio_desc *pex_rst_gpiod;
+	struct gpio_desc *pex_refclk_sel_gpiod;
+	unsigned int pex_rst_irq;
+	int ep_state;
+};
+
+struct tegra_pcie_dw_of_data {
+	enum dw_pcie_device_mode mode;
 };
 
 static inline struct tegra_pcie_dw *to_tegra_pcie(struct dw_pcie *pci)
@@ -339,8 +378,9 @@ static void apply_bad_link_workaround(struct pcie_port *pp)
 	}
 }
 
-static irqreturn_t tegra_pcie_rp_irq_handler(struct tegra_pcie_dw *pcie)
+static irqreturn_t tegra_pcie_rp_irq_handler(int irq, void *arg)
 {
+	struct tegra_pcie_dw *pcie = arg;
 	struct dw_pcie *pci = &pcie->pci;
 	struct pcie_port *pp = &pci->pp;
 	u32 val, tmp;
@@ -411,11 +451,121 @@ static irqreturn_t tegra_pcie_rp_irq_handler(struct tegra_pcie_dw *pcie)
 	return IRQ_HANDLED;
 }
 
-static irqreturn_t tegra_pcie_irq_handler(int irq, void *arg)
+static void pex_ep_event_hot_rst_done(struct tegra_pcie_dw *pcie)
+{
+	u32 val;
+
+	appl_writel(pcie, 0xFFFFFFFF, APPL_INTR_STATUS_L0);
+	appl_writel(pcie, 0xFFFFFFFF, APPL_INTR_STATUS_L1_0_0);
+	appl_writel(pcie, 0xFFFFFFFF, APPL_INTR_STATUS_L1_1);
+	appl_writel(pcie, 0xFFFFFFFF, APPL_INTR_STATUS_L1_2);
+	appl_writel(pcie, 0xFFFFFFFF, APPL_INTR_STATUS_L1_3);
+	appl_writel(pcie, 0xFFFFFFFF, APPL_INTR_STATUS_L1_6);
+	appl_writel(pcie, 0xFFFFFFFF, APPL_INTR_STATUS_L1_7);
+	appl_writel(pcie, 0xFFFFFFFF, APPL_INTR_STATUS_L1_8_0);
+	appl_writel(pcie, 0xFFFFFFFF, APPL_INTR_STATUS_L1_9);
+	appl_writel(pcie, 0xFFFFFFFF, APPL_INTR_STATUS_L1_10);
+	appl_writel(pcie, 0xFFFFFFFF, APPL_INTR_STATUS_L1_11);
+	appl_writel(pcie, 0xFFFFFFFF, APPL_INTR_STATUS_L1_13);
+	appl_writel(pcie, 0xFFFFFFFF, APPL_INTR_STATUS_L1_14);
+	appl_writel(pcie, 0xFFFFFFFF, APPL_INTR_STATUS_L1_15);
+	appl_writel(pcie, 0xFFFFFFFF, APPL_INTR_STATUS_L1_17);
+	appl_writel(pcie, 0xFFFFFFFF, APPL_MSI_CTRL_2);
+
+	val = appl_readl(pcie, APPL_CTRL);
+	val |= APPL_CTRL_LTSSM_EN;
+	appl_writel(pcie, val, APPL_CTRL);
+}
+
+static irqreturn_t tegra_pcie_ep_irq_thread(int irq, void *arg)
 {
 	struct tegra_pcie_dw *pcie = arg;
+	struct dw_pcie *pci = &pcie->pci;
+	u32 val, speed;
 
-	return tegra_pcie_rp_irq_handler(pcie);
+	speed = dw_pcie_readw_dbi(pci, pcie->pcie_cap_base + PCI_EXP_LNKSTA) &
+		PCI_EXP_LNKSTA_CLS;
+	clk_set_rate(pcie->core_clk, pcie_gen_freq[speed - 1]);
+
+	/* If EP doesn't advertise L1SS, just return */
+	val = dw_pcie_readl_dbi(pci, pcie->cfg_link_cap_l1sub);
+	if (!(val & (PCI_L1SS_CAP_ASPM_L1_1 | PCI_L1SS_CAP_ASPM_L1_2)))
+		return IRQ_HANDLED;
+
+	/* Check if BME is set to '1' */
+	val = dw_pcie_readl_dbi(pci, PCI_COMMAND);
+	if (val & PCI_COMMAND_MASTER) {
+		ktime_t timeout;
+
+		/* 110us for both snoop and no-snoop */
+		val = 110 | (2 << PCI_LTR_SCALE_SHIFT) | LTR_MSG_REQ;
+		val |= (val << LTR_MST_NO_SNOOP_SHIFT);
+		appl_writel(pcie, val, APPL_LTR_MSG_1);
+
+		/* Send LTR upstream */
+		val = appl_readl(pcie, APPL_LTR_MSG_2);
+		val |= APPL_LTR_MSG_2_LTR_MSG_REQ_STATE;
+		appl_writel(pcie, val, APPL_LTR_MSG_2);
+
+		timeout = ktime_add_us(ktime_get(), LTR_MSG_TIMEOUT);
+		for (;;) {
+			val = appl_readl(pcie, APPL_LTR_MSG_2);
+			if (!(val & APPL_LTR_MSG_2_LTR_MSG_REQ_STATE))
+				break;
+			if (ktime_after(ktime_get(), timeout))
+				break;
+			usleep_range(1000, 1100);
+		}
+		if (val & APPL_LTR_MSG_2_LTR_MSG_REQ_STATE)
+			dev_err(pcie->dev, "Failed to send LTR message\n");
+	}
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t tegra_pcie_ep_hard_irq(int irq, void *arg)
+{
+	struct tegra_pcie_dw *pcie = arg;
+	struct dw_pcie_ep *ep = &pcie->pci.ep;
+	int spurious = 1;
+	u32 val, tmp;
+
+	val = appl_readl(pcie, APPL_INTR_STATUS_L0);
+	if (val & APPL_INTR_STATUS_L0_LINK_STATE_INT) {
+		val = appl_readl(pcie, APPL_INTR_STATUS_L1_0_0);
+		appl_writel(pcie, val, APPL_INTR_STATUS_L1_0_0);
+
+		if (val & APPL_INTR_STATUS_L1_0_0_HOT_RESET_DONE)
+			pex_ep_event_hot_rst_done(pcie);
+
+		if (val & APPL_INTR_STATUS_L1_0_0_RDLH_LINK_UP_CHGED) {
+			tmp = appl_readl(pcie, APPL_LINK_STATUS);
+			if (tmp & APPL_LINK_STATUS_RDLH_LINK_UP) {
+				dev_dbg(pcie->dev, "Link is up with Host\n");
+				dw_pcie_ep_linkup(ep);
+			}
+		}
+
+		spurious = 0;
+	}
+
+	if (val & APPL_INTR_STATUS_L0_PCI_CMD_EN_INT) {
+		val = appl_readl(pcie, APPL_INTR_STATUS_L1_15);
+		appl_writel(pcie, val, APPL_INTR_STATUS_L1_15);
+
+		if (val & APPL_INTR_STATUS_L1_15_CFG_BME_CHGED)
+			return IRQ_WAKE_THREAD;
+
+		spurious = 0;
+	}
+
+	if (spurious) {
+		dev_warn(pcie->dev, "Random interrupt (STATUS = 0x%08X)\n",
+			 val);
+		appl_writel(pcie, val, APPL_INTR_STATUS_L0);
+	}
+
+	return IRQ_HANDLED;
 }
 
 static int tegra_pcie_dw_rd_own_conf(struct pcie_port *pp, int where, int size,
@@ -884,8 +1034,26 @@ static void tegra_pcie_set_msi_vec_num(struct pcie_port *pp)
 	pp->num_vectors = MAX_MSI_IRQS;
 }
 
+static int tegra_pcie_dw_start_link(struct dw_pcie *pci)
+{
+	struct tegra_pcie_dw *pcie = to_tegra_pcie(pci);
+
+	enable_irq(pcie->pex_rst_irq);
+
+	return 0;
+}
+
+static void tegra_pcie_dw_stop_link(struct dw_pcie *pci)
+{
+	struct tegra_pcie_dw *pcie = to_tegra_pcie(pci);
+
+	disable_irq(pcie->pex_rst_irq);
+}
+
 static const struct dw_pcie_ops tegra_dw_pcie_ops = {
 	.link_up = tegra_pcie_dw_link_up,
+	.start_link = tegra_pcie_dw_start_link,
+	.stop_link = tegra_pcie_dw_stop_link,
 };
 
 static struct dw_pcie_host_ops tegra_pcie_dw_host_ops = {
@@ -986,6 +1154,40 @@ static int tegra_pcie_dw_parse_dt(struct tegra_pcie_dw *pcie)
 	pcie->enable_cdm_check =
 		of_property_read_bool(np, "snps,enable-cdm-check");
 
+	if (pcie->mode == DW_PCIE_RC_TYPE)
+		return 0;
+
+	/* Endpoint mode specific DT entries */
+	pcie->pex_rst_gpiod = devm_gpiod_get(pcie->dev, "reset", GPIOD_IN);
+	if (IS_ERR(pcie->pex_rst_gpiod)) {
+		int err = PTR_ERR(pcie->pex_rst_gpiod);
+		const char *level = KERN_ERR;
+
+		if (err == -EPROBE_DEFER)
+			level = KERN_DEBUG;
+
+		dev_printk(level, pcie->dev,
+			   dev_fmt("Failed to get PERST GPIO: %d\n"),
+			   err);
+		return err;
+	}
+
+	pcie->pex_refclk_sel_gpiod = devm_gpiod_get(pcie->dev,
+						    "nvidia,refclk-select",
+						    GPIOD_OUT_HIGH);
+	if (IS_ERR(pcie->pex_refclk_sel_gpiod)) {
+		int err = PTR_ERR(pcie->pex_refclk_sel_gpiod);
+		const char *level = KERN_ERR;
+
+		if (err == -EPROBE_DEFER)
+			level = KERN_DEBUG;
+
+		dev_printk(level, pcie->dev,
+			   dev_fmt("Failed to get REFCLK select GPIOs: %d\n"),
+			   err);
+		pcie->pex_refclk_sel_gpiod = NULL;
+	}
+
 	return 0;
 }
 
@@ -1017,6 +1219,34 @@ static int tegra_pcie_bpmp_set_ctrl_state(struct tegra_pcie_dw *pcie,
 	return tegra_bpmp_transfer(pcie->bpmp, &msg);
 }
 
+static int tegra_pcie_bpmp_set_pll_state(struct tegra_pcie_dw *pcie,
+					 bool enable)
+{
+	struct mrq_uphy_response resp;
+	struct tegra_bpmp_message msg;
+	struct mrq_uphy_request req;
+
+	memset(&req, 0, sizeof(req));
+	memset(&resp, 0, sizeof(resp));
+
+	if (enable) {
+		req.cmd = CMD_UPHY_PCIE_EP_CONTROLLER_PLL_INIT;
+		req.ep_ctrlr_pll_init.ep_controller = pcie->cid;
+	} else {
+		req.cmd = CMD_UPHY_PCIE_EP_CONTROLLER_PLL_OFF;
+		req.ep_ctrlr_pll_off.ep_controller = pcie->cid;
+	}
+
+	memset(&msg, 0, sizeof(msg));
+	msg.mrq = MRQ_UPHY;
+	msg.tx.data = &req;
+	msg.tx.size = sizeof(req);
+	msg.rx.data = &resp;
+	msg.rx.size = sizeof(resp);
+
+	return tegra_bpmp_transfer(pcie->bpmp, &msg);
+}
+
 static void tegra_pcie_downstream_dev_to_D0(struct tegra_pcie_dw *pcie)
 {
 	struct pcie_port *pp = &pcie->pci.pp;
@@ -1427,8 +1657,396 @@ static int tegra_pcie_config_rp(struct tegra_pcie_dw *pcie)
 	return ret;
 }
 
+static void pex_ep_event_pex_rst_assert(struct tegra_pcie_dw *pcie)
+{
+	u32 val;
+	int ret;
+
+	if (pcie->ep_state == EP_STATE_DISABLED)
+		return;
+
+	/* Disable LTSSM */
+	val = appl_readl(pcie, APPL_CTRL);
+	val &= ~APPL_CTRL_LTSSM_EN;
+	appl_writel(pcie, val, APPL_CTRL);
+
+	ret = readl_poll_timeout(pcie->appl_base + APPL_DEBUG, val,
+				 ((val & APPL_DEBUG_LTSSM_STATE_MASK) >>
+				 APPL_DEBUG_LTSSM_STATE_SHIFT) ==
+				 LTSSM_STATE_PRE_DETECT,
+				 1, LTSSM_TIMEOUT);
+	if (ret)
+		dev_err(pcie->dev, "Failed to go Detect state: %d\n", ret);
+
+	reset_control_assert(pcie->core_rst);
+
+	tegra_pcie_disable_phy(pcie);
+
+	reset_control_assert(pcie->core_apb_rst);
+
+	clk_disable_unprepare(pcie->core_clk);
+
+	pm_runtime_put_sync(pcie->dev);
+
+	ret = tegra_pcie_bpmp_set_pll_state(pcie, false);
+	if (ret)
+		dev_err(pcie->dev, "Failed to turn off UPHY: %d\n", ret);
+
+	pcie->ep_state = EP_STATE_DISABLED;
+	dev_dbg(pcie->dev, "Uninitialization of endpoint is completed\n");
+}
+
+static void pex_ep_event_pex_rst_deassert(struct tegra_pcie_dw *pcie)
+{
+	struct dw_pcie *pci = &pcie->pci;
+	struct dw_pcie_ep *ep = &pci->ep;
+	struct device *dev = pcie->dev;
+	u32 val;
+	int ret;
+
+	if (pcie->ep_state == EP_STATE_ENABLED)
+		return;
+
+	ret = pm_runtime_get_sync(dev);
+	if (ret < 0) {
+		dev_err(dev, "Failed to get runtime sync for PCIe dev: %d\n",
+			ret);
+		return;
+	}
+
+	ret = tegra_pcie_bpmp_set_pll_state(pcie, true);
+	if (ret) {
+		dev_err(dev, "Failed to init UPHY for PCIe EP: %d\n", ret);
+		goto fail_pll_init;
+	}
+
+	ret = clk_prepare_enable(pcie->core_clk);
+	if (ret) {
+		dev_err(dev, "Failed to enable core clock: %d\n", ret);
+		goto fail_core_clk_enable;
+	}
+
+	ret = reset_control_deassert(pcie->core_apb_rst);
+	if (ret) {
+		dev_err(dev, "Failed to deassert core APB reset: %d\n", ret);
+		goto fail_core_apb_rst;
+	}
+
+	ret = tegra_pcie_enable_phy(pcie);
+	if (ret) {
+		dev_err(dev, "Failed to enable PHY: %d\n", ret);
+		goto fail_phy;
+	}
+
+	/* Clear any stale interrupt statuses */
+	appl_writel(pcie, 0xFFFFFFFF, APPL_INTR_STATUS_L0);
+	appl_writel(pcie, 0xFFFFFFFF, APPL_INTR_STATUS_L1_0_0);
+	appl_writel(pcie, 0xFFFFFFFF, APPL_INTR_STATUS_L1_1);
+	appl_writel(pcie, 0xFFFFFFFF, APPL_INTR_STATUS_L1_2);
+	appl_writel(pcie, 0xFFFFFFFF, APPL_INTR_STATUS_L1_3);
+	appl_writel(pcie, 0xFFFFFFFF, APPL_INTR_STATUS_L1_6);
+	appl_writel(pcie, 0xFFFFFFFF, APPL_INTR_STATUS_L1_7);
+	appl_writel(pcie, 0xFFFFFFFF, APPL_INTR_STATUS_L1_8_0);
+	appl_writel(pcie, 0xFFFFFFFF, APPL_INTR_STATUS_L1_9);
+	appl_writel(pcie, 0xFFFFFFFF, APPL_INTR_STATUS_L1_10);
+	appl_writel(pcie, 0xFFFFFFFF, APPL_INTR_STATUS_L1_11);
+	appl_writel(pcie, 0xFFFFFFFF, APPL_INTR_STATUS_L1_13);
+	appl_writel(pcie, 0xFFFFFFFF, APPL_INTR_STATUS_L1_14);
+	appl_writel(pcie, 0xFFFFFFFF, APPL_INTR_STATUS_L1_15);
+	appl_writel(pcie, 0xFFFFFFFF, APPL_INTR_STATUS_L1_17);
+
+	/* configure this core for EP mode operation */
+	val = appl_readl(pcie, APPL_DM_TYPE);
+	val &= ~APPL_DM_TYPE_MASK;
+	val |= APPL_DM_TYPE_EP;
+	appl_writel(pcie, val, APPL_DM_TYPE);
+
+	appl_writel(pcie, 0x0, APPL_CFG_SLCG_OVERRIDE);
+
+	val = appl_readl(pcie, APPL_CTRL);
+	val |= APPL_CTRL_SYS_PRE_DET_STATE;
+	val |= APPL_CTRL_HW_HOT_RST_EN;
+	appl_writel(pcie, val, APPL_CTRL);
+
+	val = appl_readl(pcie, APPL_CFG_MISC);
+	val |= APPL_CFG_MISC_SLV_EP_MODE;
+	val |= (APPL_CFG_MISC_ARCACHE_VAL << APPL_CFG_MISC_ARCACHE_SHIFT);
+	appl_writel(pcie, val, APPL_CFG_MISC);
+
+	val = appl_readl(pcie, APPL_PINMUX);
+	val |= APPL_PINMUX_CLK_OUTPUT_IN_OVERRIDE_EN;
+	val |= APPL_PINMUX_CLK_OUTPUT_IN_OVERRIDE;
+	appl_writel(pcie, val, APPL_PINMUX);
+
+	appl_writel(pcie, pcie->dbi_res->start & APPL_CFG_BASE_ADDR_MASK,
+		    APPL_CFG_BASE_ADDR);
+
+	appl_writel(pcie, pcie->atu_dma_res->start &
+		    APPL_CFG_IATU_DMA_BASE_ADDR_MASK,
+		    APPL_CFG_IATU_DMA_BASE_ADDR);
+
+	val = appl_readl(pcie, APPL_INTR_EN_L0_0);
+	val |= APPL_INTR_EN_L0_0_SYS_INTR_EN;
+	val |= APPL_INTR_EN_L0_0_LINK_STATE_INT_EN;
+	val |= APPL_INTR_EN_L0_0_PCI_CMD_EN_INT_EN;
+	appl_writel(pcie, val, APPL_INTR_EN_L0_0);
+
+	val = appl_readl(pcie, APPL_INTR_EN_L1_0_0);
+	val |= APPL_INTR_EN_L1_0_0_HOT_RESET_DONE_INT_EN;
+	val |= APPL_INTR_EN_L1_0_0_RDLH_LINK_UP_INT_EN;
+	appl_writel(pcie, val, APPL_INTR_EN_L1_0_0);
+
+	reset_control_deassert(pcie->core_rst);
+
+	if (pcie->update_fc_fixup) {
+		val = dw_pcie_readl_dbi(pci, CFG_TIMER_CTRL_MAX_FUNC_NUM_OFF);
+		val |= 0x1 << CFG_TIMER_CTRL_ACK_NAK_SHIFT;
+		dw_pcie_writel_dbi(pci, CFG_TIMER_CTRL_MAX_FUNC_NUM_OFF, val);
+	}
+
+	config_gen3_gen4_eq_presets(pcie);
+
+	init_host_aspm(pcie);
+
+	/* Disable ASPM-L1SS advertisement if there is no CLKREQ routing */
+	if (!pcie->supports_clkreq) {
+		disable_aspm_l11(pcie);
+		disable_aspm_l12(pcie);
+	}
+
+	val = dw_pcie_readl_dbi(pci, GEN3_RELATED_OFF);
+	val &= ~GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL;
+	dw_pcie_writel_dbi(pci, GEN3_RELATED_OFF, val);
+
+	/* Configure N_FTS & FTS */
+	val = dw_pcie_readl_dbi(pci, PORT_LOGIC_ACK_F_ASPM_CTRL);
+	val &= ~(N_FTS_MASK << N_FTS_SHIFT);
+	val |= N_FTS_VAL << N_FTS_SHIFT;
+	dw_pcie_writel_dbi(pci, PORT_LOGIC_ACK_F_ASPM_CTRL, val);
+
+	val = dw_pcie_readl_dbi(pci, PORT_LOGIC_GEN2_CTRL);
+	val &= ~FTS_MASK;
+	val |= FTS_VAL;
+	dw_pcie_writel_dbi(pci, PORT_LOGIC_GEN2_CTRL, val);
+
+	/* Configure Max Speed from DT */
+	if (pcie->max_speed && pcie->max_speed != -EINVAL) {
+		val = dw_pcie_readl_dbi(pci, pcie->pcie_cap_base +
+					PCI_EXP_LNKCAP);
+		val &= ~PCI_EXP_LNKCAP_SLS;
+		val |= pcie->max_speed;
+		dw_pcie_writel_dbi(pci, pcie->pcie_cap_base + PCI_EXP_LNKCAP,
+				   val);
+	}
+
+	pcie->pcie_cap_base = dw_pcie_find_capability(&pcie->pci,
+						      PCI_CAP_ID_EXP);
+	clk_set_rate(pcie->core_clk, GEN4_CORE_CLK_FREQ);
+
+	val = (ep->msi_mem_phys & MSIX_ADDR_MATCH_LOW_OFF_MASK);
+	val |= MSIX_ADDR_MATCH_LOW_OFF_EN;
+	dw_pcie_writel_dbi(pci, MSIX_ADDR_MATCH_LOW_OFF, val);
+	val = (lower_32_bits(ep->msi_mem_phys) & MSIX_ADDR_MATCH_HIGH_OFF_MASK);
+	dw_pcie_writel_dbi(pci, MSIX_ADDR_MATCH_HIGH_OFF, val);
+
+	ret = dw_pcie_ep_init_complete(ep);
+	if (ret) {
+		dev_err(dev, "Failed to complete initialization: %d\n", ret);
+		goto fail_init_complete;
+	}
+
+	dw_pcie_ep_init_notify(ep);
+
+	/* Enable LTSSM */
+	val = appl_readl(pcie, APPL_CTRL);
+	val |= APPL_CTRL_LTSSM_EN;
+	appl_writel(pcie, val, APPL_CTRL);
+
+	pcie->ep_state = EP_STATE_ENABLED;
+	dev_dbg(dev, "Initialization of endpoint is completed\n");
+
+	return;
+
+fail_init_complete:
+	reset_control_assert(pcie->core_rst);
+	tegra_pcie_disable_phy(pcie);
+fail_phy:
+	reset_control_assert(pcie->core_apb_rst);
+fail_core_apb_rst:
+	clk_disable_unprepare(pcie->core_clk);
+fail_core_clk_enable:
+	tegra_pcie_bpmp_set_pll_state(pcie, false);
+fail_pll_init:
+	pm_runtime_put_sync(dev);
+}
+
+static irqreturn_t tegra_pcie_ep_pex_rst_irq(int irq, void *arg)
+{
+	struct tegra_pcie_dw *pcie = arg;
+
+	if (gpiod_get_value(pcie->pex_rst_gpiod))
+		pex_ep_event_pex_rst_assert(pcie);
+	else
+		pex_ep_event_pex_rst_deassert(pcie);
+
+	return IRQ_HANDLED;
+}
+
+static int tegra_pcie_ep_raise_legacy_irq(struct tegra_pcie_dw *pcie, u16 irq)
+{
+	/* Tegra194 supports only INTA */
+	if (irq > 1)
+		return -EINVAL;
+
+	appl_writel(pcie, 1, APPL_LEGACY_INTX);
+	usleep_range(1000, 2000);
+	appl_writel(pcie, 0, APPL_LEGACY_INTX);
+	return 0;
+}
+
+static int tegra_pcie_ep_raise_msi_irq(struct tegra_pcie_dw *pcie, u16 irq)
+{
+	if (unlikely(irq > 31))
+		return -EINVAL;
+
+	appl_writel(pcie, (1 << irq), APPL_MSI_CTRL_1);
+
+	return 0;
+}
+
+static int tegra_pcie_ep_raise_msix_irq(struct tegra_pcie_dw *pcie, u16 irq)
+{
+	struct dw_pcie_ep *ep = &pcie->pci.ep;
+
+	writel(irq, ep->msi_mem);
+
+	return 0;
+}
+
+static int tegra_pcie_ep_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
+				   enum pci_epc_irq_type type,
+				   u16 interrupt_num)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+	struct tegra_pcie_dw *pcie = to_tegra_pcie(pci);
+
+	switch (type) {
+	case PCI_EPC_IRQ_LEGACY:
+		return tegra_pcie_ep_raise_legacy_irq(pcie, interrupt_num);
+
+	case PCI_EPC_IRQ_MSI:
+		return tegra_pcie_ep_raise_msi_irq(pcie, interrupt_num);
+
+	case PCI_EPC_IRQ_MSIX:
+		return tegra_pcie_ep_raise_msix_irq(pcie, interrupt_num);
+
+	default:
+		dev_err(pci->dev, "Unknown IRQ type\n");
+		return -EPERM;
+	}
+
+	return 0;
+}
+
+static const struct pci_epc_features tegra_pcie_epc_features = {
+	.linkup_notifier = true,
+	.core_init_notifier = true,
+	.msi_capable = false,
+	.msix_capable = false,
+	.reserved_bar = 1 << BAR_2 | 1 << BAR_3 | 1 << BAR_4 | 1 << BAR_5,
+	.bar_fixed_64bit = 1 << BAR_0,
+	.bar_fixed_size[0] = SZ_1M,
+};
+
+static const struct pci_epc_features*
+tegra_pcie_ep_get_features(struct dw_pcie_ep *ep)
+{
+	return &tegra_pcie_epc_features;
+}
+
+static struct dw_pcie_ep_ops pcie_ep_ops = {
+	.raise_irq = tegra_pcie_ep_raise_irq,
+	.get_features = tegra_pcie_ep_get_features,
+};
+
+static int tegra_pcie_config_ep(struct tegra_pcie_dw *pcie,
+				struct platform_device *pdev)
+{
+	struct dw_pcie *pci = &pcie->pci;
+	struct device *dev = pcie->dev;
+	struct dw_pcie_ep *ep;
+	struct resource *res;
+	char *name;
+	int ret;
+
+	ep = &pci->ep;
+	ep->ops = &pcie_ep_ops;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "addr_space");
+	if (!res)
+		return -EINVAL;
+
+	ep->phys_base = res->start;
+	ep->addr_size = resource_size(res);
+	ep->page_size = SZ_64K;
+
+	ret = gpiod_set_debounce(pcie->pex_rst_gpiod, PERST_DEBOUNCE_TIME);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set PERST GPIO debounce time: %d\n",
+			ret);
+		return ret;
+	}
+
+	ret = gpiod_to_irq(pcie->pex_rst_gpiod);
+	if (ret < 0) {
+		dev_err(dev, "Failed to get IRQ for PERST GPIO: %d\n", ret);
+		return ret;
+	}
+	pcie->pex_rst_irq = (unsigned int)ret;
+
+	name = devm_kasprintf(dev, GFP_KERNEL, "tegra_pcie_%u_pex_rst_irq",
+			      pcie->cid);
+	if (!name) {
+		dev_err(dev, "Failed to create PERST IRQ string\n");
+		return -ENOMEM;
+	}
+
+	irq_set_status_flags(pcie->pex_rst_irq, IRQ_NOAUTOEN);
+
+	pcie->ep_state = EP_STATE_DISABLED;
+
+	ret = devm_request_threaded_irq(dev, pcie->pex_rst_irq, NULL,
+					tegra_pcie_ep_pex_rst_irq,
+					IRQF_TRIGGER_RISING |
+					IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+					name, (void *)pcie);
+	if (ret < 0) {
+		dev_err(dev, "Failed to request IRQ for PERST: %d\n", ret);
+		return ret;
+	}
+
+	name = devm_kasprintf(dev, GFP_KERNEL, "tegra_pcie_%u_ep_work",
+			      pcie->cid);
+	if (!name) {
+		dev_err(dev, "Failed to create PCIe EP work thread string\n");
+		return -ENOMEM;
+	}
+
+	pm_runtime_enable(dev);
+
+	ret = dw_pcie_ep_init(ep);
+	if (ret) {
+		dev_err(dev, "Failed to initialize DWC Endpoint subsystem: %d\n",
+			ret);
+		return ret;
+	}
+
+	return 0;
+}
+
 static int tegra_pcie_dw_probe(struct platform_device *pdev)
 {
+	const struct tegra_pcie_dw_of_data *data;
 	struct device *dev = &pdev->dev;
 	struct resource *atu_dma_res;
 	struct tegra_pcie_dw *pcie;
@@ -1440,6 +2058,8 @@ static int tegra_pcie_dw_probe(struct platform_device *pdev)
 	int ret;
 	u32 i;
 
+	data = of_device_get_match_data(dev);
+
 	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
 	if (!pcie)
 		return -ENOMEM;
@@ -1449,19 +2069,37 @@ static int tegra_pcie_dw_probe(struct platform_device *pdev)
 	pci->ops = &tegra_dw_pcie_ops;
 	pp = &pci->pp;
 	pcie->dev = &pdev->dev;
+	pcie->mode = (enum dw_pcie_device_mode)data->mode;
 
 	ret = tegra_pcie_dw_parse_dt(pcie);
 	if (ret < 0) {
-		dev_err(dev, "Failed to parse device tree: %d\n", ret);
+		const char *level = KERN_ERR;
+
+		if (ret == -EPROBE_DEFER)
+			level = KERN_DEBUG;
+
+		dev_printk(level, dev,
+			   dev_fmt("Failed to parse device tree: %d\n"),
+			   ret);
 		return ret;
 	}
 
 	ret = tegra_pcie_get_slot_regulators(pcie);
 	if (ret < 0) {
-		dev_err(dev, "Failed to get slot regulators: %d\n", ret);
+		const char *level = KERN_ERR;
+
+		if (ret == -EPROBE_DEFER)
+			level = KERN_DEBUG;
+
+		dev_printk(level, dev,
+			   dev_fmt("Failed to get slot regulators: %d\n"),
+			   ret);
 		return ret;
 	}
 
+	if (pcie->pex_refclk_sel_gpiod)
+		gpiod_set_value(pcie->pex_refclk_sel_gpiod, 1);
+
 	pcie->pex_ctl_supply = devm_regulator_get(dev, "vddio-pex-ctl");
 	if (IS_ERR(pcie->pex_ctl_supply)) {
 		ret = PTR_ERR(pcie->pex_ctl_supply);
@@ -1557,24 +2195,49 @@ static int tegra_pcie_dw_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	ret = devm_request_irq(dev, pp->irq, tegra_pcie_irq_handler,
-			       IRQF_SHARED, "tegra-pcie-intr", pcie);
-	if (ret) {
-		dev_err(dev, "Failed to request IRQ %d: %d\n", pp->irq, ret);
-		return ret;
-	}
-
 	pcie->bpmp = tegra_bpmp_get(dev);
 	if (IS_ERR(pcie->bpmp))
 		return PTR_ERR(pcie->bpmp);
 
 	platform_set_drvdata(pdev, pcie);
 
-	ret = tegra_pcie_config_rp(pcie);
-	if (ret && ret != -ENOMEDIUM)
-		goto fail;
-	else
-		return 0;
+	switch (pcie->mode) {
+	case DW_PCIE_RC_TYPE:
+		ret = devm_request_irq(dev, pp->irq, tegra_pcie_rp_irq_handler,
+				       IRQF_SHARED, "tegra-pcie-intr", pcie);
+		if (ret) {
+			dev_err(dev, "Failed to request IRQ %d: %d\n", pp->irq,
+				ret);
+			goto fail;
+		}
+
+		ret = tegra_pcie_config_rp(pcie);
+		if (ret && ret != -ENOMEDIUM)
+			goto fail;
+		else
+			return 0;
+		break;
+
+	case DW_PCIE_EP_TYPE:
+		ret = devm_request_threaded_irq(dev, pp->irq,
+						tegra_pcie_ep_hard_irq,
+						tegra_pcie_ep_irq_thread,
+						IRQF_SHARED | IRQF_ONESHOT,
+						"tegra-pcie-ep-intr", pcie);
+		if (ret) {
+			dev_err(dev, "Failed to request IRQ %d: %d\n", pp->irq,
+				ret);
+			goto fail;
+		}
+
+		ret = tegra_pcie_config_ep(pcie, pdev);
+		if (ret < 0)
+			goto fail;
+		break;
+
+	default:
+		dev_err(dev, "Invalid PCIe device type %d\n", pcie->mode);
+	}
 
 fail:
 	tegra_bpmp_put(pcie->bpmp);
@@ -1593,6 +2256,8 @@ static int tegra_pcie_dw_remove(struct platform_device *pdev)
 	pm_runtime_put_sync(pcie->dev);
 	pm_runtime_disable(pcie->dev);
 	tegra_bpmp_put(pcie->bpmp);
+	if (pcie->pex_refclk_sel_gpiod)
+		gpiod_set_value(pcie->pex_refclk_sel_gpiod, 0);
 
 	return 0;
 }
@@ -1697,9 +2362,22 @@ static void tegra_pcie_dw_shutdown(struct platform_device *pdev)
 	__deinit_controller(pcie);
 }
 
+static const struct tegra_pcie_dw_of_data tegra_pcie_dw_rc_of_data = {
+	.mode = DW_PCIE_RC_TYPE,
+};
+
+static const struct tegra_pcie_dw_of_data tegra_pcie_dw_ep_of_data = {
+	.mode = DW_PCIE_EP_TYPE,
+};
+
 static const struct of_device_id tegra_pcie_dw_of_match[] = {
 	{
 		.compatible = "nvidia,tegra194-pcie",
+		.data = &tegra_pcie_dw_rc_of_data,
+	},
+	{
+		.compatible = "nvidia,tegra194-pcie-ep",
+		.data = &tegra_pcie_dw_ep_of_data,
 	},
 	{},
 };
diff --git a/drivers/pci/controller/mobiveil/Kconfig b/drivers/pci/controller/mobiveil/Kconfig
new file mode 100644
index 0000000..a62d247
--- /dev/null
+++ b/drivers/pci/controller/mobiveil/Kconfig
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: GPL-2.0
+
+menu "Mobiveil PCIe Core Support"
+	depends on PCI
+
+config PCIE_MOBIVEIL
+	bool
+
+config PCIE_MOBIVEIL_HOST
+	bool
+	depends on PCI_MSI_IRQ_DOMAIN
+	select PCIE_MOBIVEIL
+
+config PCIE_MOBIVEIL_PLAT
+	bool "Mobiveil AXI PCIe controller"
+	depends on ARCH_ZYNQMP || COMPILE_TEST
+	depends on OF
+	depends on PCI_MSI_IRQ_DOMAIN
+	select PCIE_MOBIVEIL_HOST
+	help
+	  Say Y here if you want to enable support for the Mobiveil AXI PCIe
+	  Soft IP. It has up to 8 outbound and inbound windows
+	  for address translation and it is a PCIe Gen4 IP.
+
+config PCIE_LAYERSCAPE_GEN4
+	bool "Freescale Layerscape PCIe Gen4 controller"
+	depends on PCI
+	depends on OF && (ARM64 || ARCH_LAYERSCAPE)
+	depends on PCI_MSI_IRQ_DOMAIN
+	select PCIE_MOBIVEIL_HOST
+	help
+	  Say Y here if you want PCIe Gen4 controller support on
+	  Layerscape SoCs.
+endmenu
diff --git a/drivers/pci/controller/mobiveil/Makefile b/drivers/pci/controller/mobiveil/Makefile
new file mode 100644
index 0000000..99d879d
--- /dev/null
+++ b/drivers/pci/controller/mobiveil/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_PCIE_MOBIVEIL) += pcie-mobiveil.o
+obj-$(CONFIG_PCIE_MOBIVEIL_HOST) += pcie-mobiveil-host.o
+obj-$(CONFIG_PCIE_MOBIVEIL_PLAT) += pcie-mobiveil-plat.o
+obj-$(CONFIG_PCIE_LAYERSCAPE_GEN4) += pcie-layerscape-gen4.o
diff --git a/drivers/pci/controller/mobiveil/pcie-layerscape-gen4.c b/drivers/pci/controller/mobiveil/pcie-layerscape-gen4.c
new file mode 100644
index 0000000..a6d2190
--- /dev/null
+++ b/drivers/pci/controller/mobiveil/pcie-layerscape-gen4.c
@@ -0,0 +1,267 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PCIe Gen4 host controller driver for NXP Layerscape SoCs
+ *
+ * Copyright 2019-2020 NXP
+ *
+ * Author: Zhiqiang Hou <Zhiqiang.Hou@nxp.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/of_pci.h>
+#include <linux/of_platform.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/resource.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+
+#include "pcie-mobiveil.h"
+
+/* LUT and PF control registers */
+#define PCIE_LUT_OFF			0x80000
+#define PCIE_PF_OFF			0xc0000
+#define PCIE_PF_INT_STAT		0x18
+#define PF_INT_STAT_PABRST		BIT(31)
+
+#define PCIE_PF_DBG			0x7fc
+#define PF_DBG_LTSSM_MASK		0x3f
+#define PF_DBG_LTSSM_L0			0x2d /* L0 state */
+#define PF_DBG_WE			BIT(31)
+#define PF_DBG_PABR			BIT(27)
+
+#define to_ls_pcie_g4(x)		platform_get_drvdata((x)->pdev)
+
+struct ls_pcie_g4 {
+	struct mobiveil_pcie pci;
+	struct delayed_work dwork;
+	int irq;
+};
+
+static inline u32 ls_pcie_g4_lut_readl(struct ls_pcie_g4 *pcie, u32 off)
+{
+	return ioread32(pcie->pci.csr_axi_slave_base + PCIE_LUT_OFF + off);
+}
+
+static inline void ls_pcie_g4_lut_writel(struct ls_pcie_g4 *pcie,
+					 u32 off, u32 val)
+{
+	iowrite32(val, pcie->pci.csr_axi_slave_base + PCIE_LUT_OFF + off);
+}
+
+static inline u32 ls_pcie_g4_pf_readl(struct ls_pcie_g4 *pcie, u32 off)
+{
+	return ioread32(pcie->pci.csr_axi_slave_base + PCIE_PF_OFF + off);
+}
+
+static inline void ls_pcie_g4_pf_writel(struct ls_pcie_g4 *pcie,
+					u32 off, u32 val)
+{
+	iowrite32(val, pcie->pci.csr_axi_slave_base + PCIE_PF_OFF + off);
+}
+
+static int ls_pcie_g4_link_up(struct mobiveil_pcie *pci)
+{
+	struct ls_pcie_g4 *pcie = to_ls_pcie_g4(pci);
+	u32 state;
+
+	state = ls_pcie_g4_pf_readl(pcie, PCIE_PF_DBG);
+	state =	state & PF_DBG_LTSSM_MASK;
+
+	if (state == PF_DBG_LTSSM_L0)
+		return 1;
+
+	return 0;
+}
+
+static void ls_pcie_g4_disable_interrupt(struct ls_pcie_g4 *pcie)
+{
+	struct mobiveil_pcie *mv_pci = &pcie->pci;
+
+	mobiveil_csr_writel(mv_pci, 0, PAB_INTP_AMBA_MISC_ENB);
+}
+
+static void ls_pcie_g4_enable_interrupt(struct ls_pcie_g4 *pcie)
+{
+	struct mobiveil_pcie *mv_pci = &pcie->pci;
+	u32 val;
+
+	/* Clear the interrupt status */
+	mobiveil_csr_writel(mv_pci, 0xffffffff, PAB_INTP_AMBA_MISC_STAT);
+
+	val = PAB_INTP_INTX_MASK | PAB_INTP_MSI | PAB_INTP_RESET |
+	      PAB_INTP_PCIE_UE | PAB_INTP_IE_PMREDI | PAB_INTP_IE_EC;
+	mobiveil_csr_writel(mv_pci, val, PAB_INTP_AMBA_MISC_ENB);
+}
+
+static int ls_pcie_g4_reinit_hw(struct ls_pcie_g4 *pcie)
+{
+	struct mobiveil_pcie *mv_pci = &pcie->pci;
+	struct device *dev = &mv_pci->pdev->dev;
+	u32 val, act_stat;
+	int to = 100;
+
+	/* Poll for pab_csb_reset to set and PAB activity to clear */
+	do {
+		usleep_range(10, 15);
+		val = ls_pcie_g4_pf_readl(pcie, PCIE_PF_INT_STAT);
+		act_stat = mobiveil_csr_readl(mv_pci, PAB_ACTIVITY_STAT);
+	} while (((val & PF_INT_STAT_PABRST) == 0 || act_stat) && to--);
+	if (to < 0) {
+		dev_err(dev, "Poll PABRST&PABACT timeout\n");
+		return -EIO;
+	}
+
+	/* clear PEX_RESET bit in PEX_PF0_DBG register */
+	val = ls_pcie_g4_pf_readl(pcie, PCIE_PF_DBG);
+	val |= PF_DBG_WE;
+	ls_pcie_g4_pf_writel(pcie, PCIE_PF_DBG, val);
+
+	val = ls_pcie_g4_pf_readl(pcie, PCIE_PF_DBG);
+	val |= PF_DBG_PABR;
+	ls_pcie_g4_pf_writel(pcie, PCIE_PF_DBG, val);
+
+	val = ls_pcie_g4_pf_readl(pcie, PCIE_PF_DBG);
+	val &= ~PF_DBG_WE;
+	ls_pcie_g4_pf_writel(pcie, PCIE_PF_DBG, val);
+
+	mobiveil_host_init(mv_pci, true);
+
+	to = 100;
+	while (!ls_pcie_g4_link_up(mv_pci) && to--)
+		usleep_range(200, 250);
+	if (to < 0) {
+		dev_err(dev, "PCIe link training timeout\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static irqreturn_t ls_pcie_g4_isr(int irq, void *dev_id)
+{
+	struct ls_pcie_g4 *pcie = (struct ls_pcie_g4 *)dev_id;
+	struct mobiveil_pcie *mv_pci = &pcie->pci;
+	u32 val;
+
+	val = mobiveil_csr_readl(mv_pci, PAB_INTP_AMBA_MISC_STAT);
+	if (!val)
+		return IRQ_NONE;
+
+	if (val & PAB_INTP_RESET) {
+		ls_pcie_g4_disable_interrupt(pcie);
+		schedule_delayed_work(&pcie->dwork, msecs_to_jiffies(1));
+	}
+
+	mobiveil_csr_writel(mv_pci, val, PAB_INTP_AMBA_MISC_STAT);
+
+	return IRQ_HANDLED;
+}
+
+static int ls_pcie_g4_interrupt_init(struct mobiveil_pcie *mv_pci)
+{
+	struct ls_pcie_g4 *pcie = to_ls_pcie_g4(mv_pci);
+	struct platform_device *pdev = mv_pci->pdev;
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	pcie->irq = platform_get_irq_byname(pdev, "intr");
+	if (pcie->irq < 0) {
+		dev_err(dev, "Can't get 'intr' IRQ, errno = %d\n", pcie->irq);
+		return pcie->irq;
+	}
+	ret = devm_request_irq(dev, pcie->irq, ls_pcie_g4_isr,
+			       IRQF_SHARED, pdev->name, pcie);
+	if (ret) {
+		dev_err(dev, "Can't register PCIe IRQ, errno = %d\n", ret);
+		return  ret;
+	}
+
+	return 0;
+}
+
+static void ls_pcie_g4_reset(struct work_struct *work)
+{
+	struct delayed_work *dwork = container_of(work, struct delayed_work,
+						  work);
+	struct ls_pcie_g4 *pcie = container_of(dwork, struct ls_pcie_g4, dwork);
+	struct mobiveil_pcie *mv_pci = &pcie->pci;
+	u16 ctrl;
+
+	ctrl = mobiveil_csr_readw(mv_pci, PCI_BRIDGE_CONTROL);
+	ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
+	mobiveil_csr_writew(mv_pci, ctrl, PCI_BRIDGE_CONTROL);
+
+	if (!ls_pcie_g4_reinit_hw(pcie))
+		return;
+
+	ls_pcie_g4_enable_interrupt(pcie);
+}
+
+static struct mobiveil_rp_ops ls_pcie_g4_rp_ops = {
+	.interrupt_init = ls_pcie_g4_interrupt_init,
+};
+
+static const struct mobiveil_pab_ops ls_pcie_g4_pab_ops = {
+	.link_up = ls_pcie_g4_link_up,
+};
+
+static int __init ls_pcie_g4_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct pci_host_bridge *bridge;
+	struct mobiveil_pcie *mv_pci;
+	struct ls_pcie_g4 *pcie;
+	struct device_node *np = dev->of_node;
+	int ret;
+
+	if (!of_parse_phandle(np, "msi-parent", 0)) {
+		dev_err(dev, "Failed to find msi-parent\n");
+		return -EINVAL;
+	}
+
+	bridge = devm_pci_alloc_host_bridge(dev, sizeof(*pcie));
+	if (!bridge)
+		return -ENOMEM;
+
+	pcie = pci_host_bridge_priv(bridge);
+	mv_pci = &pcie->pci;
+
+	mv_pci->pdev = pdev;
+	mv_pci->ops = &ls_pcie_g4_pab_ops;
+	mv_pci->rp.ops = &ls_pcie_g4_rp_ops;
+	mv_pci->rp.bridge = bridge;
+
+	platform_set_drvdata(pdev, pcie);
+
+	INIT_DELAYED_WORK(&pcie->dwork, ls_pcie_g4_reset);
+
+	ret = mobiveil_pcie_host_probe(mv_pci);
+	if (ret) {
+		dev_err(dev, "Fail to probe\n");
+		return  ret;
+	}
+
+	ls_pcie_g4_enable_interrupt(pcie);
+
+	return 0;
+}
+
+static const struct of_device_id ls_pcie_g4_of_match[] = {
+	{ .compatible = "fsl,lx2160a-pcie", },
+	{ },
+};
+
+static struct platform_driver ls_pcie_g4_driver = {
+	.driver = {
+		.name = "layerscape-pcie-gen4",
+		.of_match_table = ls_pcie_g4_of_match,
+		.suppress_bind_attrs = true,
+	},
+};
+
+builtin_platform_driver_probe(ls_pcie_g4_driver, ls_pcie_g4_probe);
diff --git a/drivers/pci/controller/mobiveil/pcie-mobiveil-host.c b/drivers/pci/controller/mobiveil/pcie-mobiveil-host.c
new file mode 100644
index 0000000..a94be26
--- /dev/null
+++ b/drivers/pci/controller/mobiveil/pcie-mobiveil-host.c
@@ -0,0 +1,636 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PCIe host controller driver for Mobiveil PCIe Host controller
+ *
+ * Copyright (c) 2018 Mobiveil Inc.
+ * Copyright 2019-2020 NXP
+ *
+ * Author: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
+ *	   Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/msi.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/of_pci.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "pcie-mobiveil.h"
+
+static bool mobiveil_pcie_valid_device(struct pci_bus *bus, unsigned int devfn)
+{
+	struct mobiveil_pcie *pcie = bus->sysdata;
+	struct mobiveil_root_port *rp = &pcie->rp;
+
+	/* Only one device down on each root port */
+	if ((bus->number == rp->root_bus_nr) && (devfn > 0))
+		return false;
+
+	/*
+	 * Do not read more than one device on the bus directly
+	 * attached to RC
+	 */
+	if ((bus->primary == rp->root_bus_nr) && (PCI_SLOT(devfn) > 0))
+		return false;
+
+	return true;
+}
+
+/*
+ * mobiveil_pcie_map_bus - routine to get the configuration base of either
+ * root port or endpoint
+ */
+static void __iomem *mobiveil_pcie_map_bus(struct pci_bus *bus,
+					   unsigned int devfn, int where)
+{
+	struct mobiveil_pcie *pcie = bus->sysdata;
+	struct mobiveil_root_port *rp = &pcie->rp;
+	u32 value;
+
+	if (!mobiveil_pcie_valid_device(bus, devfn))
+		return NULL;
+
+	/* RC config access */
+	if (bus->number == rp->root_bus_nr)
+		return pcie->csr_axi_slave_base + where;
+
+	/*
+	 * EP config access (in Config/APIO space)
+	 * Program PEX Address base (31..16 bits) with appropriate value
+	 * (BDF) in PAB_AXI_AMAP_PEX_WIN_L0 Register.
+	 * Relies on pci_lock serialization
+	 */
+	value = bus->number << PAB_BUS_SHIFT |
+		PCI_SLOT(devfn) << PAB_DEVICE_SHIFT |
+		PCI_FUNC(devfn) << PAB_FUNCTION_SHIFT;
+
+	mobiveil_csr_writel(pcie, value, PAB_AXI_AMAP_PEX_WIN_L(WIN_NUM_0));
+
+	return rp->config_axi_slave_base + where;
+}
+
+static struct pci_ops mobiveil_pcie_ops = {
+	.map_bus = mobiveil_pcie_map_bus,
+	.read = pci_generic_config_read,
+	.write = pci_generic_config_write,
+};
+
+static void mobiveil_pcie_isr(struct irq_desc *desc)
+{
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	struct mobiveil_pcie *pcie = irq_desc_get_handler_data(desc);
+	struct device *dev = &pcie->pdev->dev;
+	struct mobiveil_root_port *rp = &pcie->rp;
+	struct mobiveil_msi *msi = &rp->msi;
+	u32 msi_data, msi_addr_lo, msi_addr_hi;
+	u32 intr_status, msi_status;
+	unsigned long shifted_status;
+	u32 bit, virq, val, mask;
+
+	/*
+	 * The core provides a single interrupt for both INTx/MSI messages.
+	 * So we'll read both INTx and MSI status
+	 */
+
+	chained_irq_enter(chip, desc);
+
+	/* read INTx status */
+	val = mobiveil_csr_readl(pcie, PAB_INTP_AMBA_MISC_STAT);
+	mask = mobiveil_csr_readl(pcie, PAB_INTP_AMBA_MISC_ENB);
+	intr_status = val & mask;
+
+	/* Handle INTx */
+	if (intr_status & PAB_INTP_INTX_MASK) {
+		shifted_status = mobiveil_csr_readl(pcie,
+						    PAB_INTP_AMBA_MISC_STAT);
+		shifted_status &= PAB_INTP_INTX_MASK;
+		shifted_status >>= PAB_INTX_START;
+		do {
+			for_each_set_bit(bit, &shifted_status, PCI_NUM_INTX) {
+				virq = irq_find_mapping(rp->intx_domain,
+							bit + 1);
+				if (virq)
+					generic_handle_irq(virq);
+				else
+					dev_err_ratelimited(dev, "unexpected IRQ, INT%d\n",
+							    bit);
+
+				/* clear interrupt handled */
+				mobiveil_csr_writel(pcie,
+						    1 << (PAB_INTX_START + bit),
+						    PAB_INTP_AMBA_MISC_STAT);
+			}
+
+			shifted_status = mobiveil_csr_readl(pcie,
+							    PAB_INTP_AMBA_MISC_STAT);
+			shifted_status &= PAB_INTP_INTX_MASK;
+			shifted_status >>= PAB_INTX_START;
+		} while (shifted_status != 0);
+	}
+
+	/* read extra MSI status register */
+	msi_status = readl_relaxed(pcie->apb_csr_base + MSI_STATUS_OFFSET);
+
+	/* handle MSI interrupts */
+	while (msi_status & 1) {
+		msi_data = readl_relaxed(pcie->apb_csr_base + MSI_DATA_OFFSET);
+
+		/*
+		 * MSI_STATUS_OFFSET register gets updated to zero
+		 * once we pop not only the MSI data but also address
+		 * from MSI hardware FIFO. So keeping these following
+		 * two dummy reads.
+		 */
+		msi_addr_lo = readl_relaxed(pcie->apb_csr_base +
+					    MSI_ADDR_L_OFFSET);
+		msi_addr_hi = readl_relaxed(pcie->apb_csr_base +
+					    MSI_ADDR_H_OFFSET);
+		dev_dbg(dev, "MSI registers, data: %08x, addr: %08x:%08x\n",
+			msi_data, msi_addr_hi, msi_addr_lo);
+
+		virq = irq_find_mapping(msi->dev_domain, msi_data);
+		if (virq)
+			generic_handle_irq(virq);
+
+		msi_status = readl_relaxed(pcie->apb_csr_base +
+					   MSI_STATUS_OFFSET);
+	}
+
+	/* Clear the interrupt status */
+	mobiveil_csr_writel(pcie, intr_status, PAB_INTP_AMBA_MISC_STAT);
+	chained_irq_exit(chip, desc);
+}
+
+static int mobiveil_pcie_parse_dt(struct mobiveil_pcie *pcie)
+{
+	struct device *dev = &pcie->pdev->dev;
+	struct platform_device *pdev = pcie->pdev;
+	struct device_node *node = dev->of_node;
+	struct mobiveil_root_port *rp = &pcie->rp;
+	struct resource *res;
+
+	/* map config resource */
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+					   "config_axi_slave");
+	rp->config_axi_slave_base = devm_pci_remap_cfg_resource(dev, res);
+	if (IS_ERR(rp->config_axi_slave_base))
+		return PTR_ERR(rp->config_axi_slave_base);
+	rp->ob_io_res = res;
+
+	/* map csr resource */
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+					   "csr_axi_slave");
+	pcie->csr_axi_slave_base = devm_pci_remap_cfg_resource(dev, res);
+	if (IS_ERR(pcie->csr_axi_slave_base))
+		return PTR_ERR(pcie->csr_axi_slave_base);
+	pcie->pcie_reg_base = res->start;
+
+	/* read the number of windows requested */
+	if (of_property_read_u32(node, "apio-wins", &pcie->apio_wins))
+		pcie->apio_wins = MAX_PIO_WINDOWS;
+
+	if (of_property_read_u32(node, "ppio-wins", &pcie->ppio_wins))
+		pcie->ppio_wins = MAX_PIO_WINDOWS;
+
+	return 0;
+}
+
+static void mobiveil_pcie_enable_msi(struct mobiveil_pcie *pcie)
+{
+	phys_addr_t msg_addr = pcie->pcie_reg_base;
+	struct mobiveil_msi *msi = &pcie->rp.msi;
+
+	msi->num_of_vectors = PCI_NUM_MSI;
+	msi->msi_pages_phys = (phys_addr_t)msg_addr;
+
+	writel_relaxed(lower_32_bits(msg_addr),
+		       pcie->apb_csr_base + MSI_BASE_LO_OFFSET);
+	writel_relaxed(upper_32_bits(msg_addr),
+		       pcie->apb_csr_base + MSI_BASE_HI_OFFSET);
+	writel_relaxed(4096, pcie->apb_csr_base + MSI_SIZE_OFFSET);
+	writel_relaxed(1, pcie->apb_csr_base + MSI_ENABLE_OFFSET);
+}
+
+int mobiveil_host_init(struct mobiveil_pcie *pcie, bool reinit)
+{
+	struct mobiveil_root_port *rp = &pcie->rp;
+	struct pci_host_bridge *bridge = rp->bridge;
+	u32 value, pab_ctrl, type;
+	struct resource_entry *win;
+
+	pcie->ib_wins_configured = 0;
+	pcie->ob_wins_configured = 0;
+
+	if (!reinit) {
+		/* setup bus numbers */
+		value = mobiveil_csr_readl(pcie, PCI_PRIMARY_BUS);
+		value &= 0xff000000;
+		value |= 0x00ff0100;
+		mobiveil_csr_writel(pcie, value, PCI_PRIMARY_BUS);
+	}
+
+	/*
+	 * program Bus Master Enable Bit in Command Register in PAB Config
+	 * Space
+	 */
+	value = mobiveil_csr_readl(pcie, PCI_COMMAND);
+	value |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
+	mobiveil_csr_writel(pcie, value, PCI_COMMAND);
+
+	/*
+	 * program PIO Enable Bit to 1 (and PEX PIO Enable to 1) in PAB_CTRL
+	 * register
+	 */
+	pab_ctrl = mobiveil_csr_readl(pcie, PAB_CTRL);
+	pab_ctrl |= (1 << AMBA_PIO_ENABLE_SHIFT) | (1 << PEX_PIO_ENABLE_SHIFT);
+	mobiveil_csr_writel(pcie, pab_ctrl, PAB_CTRL);
+
+	/*
+	 * program PIO Enable Bit to 1 and Config Window Enable Bit to 1 in
+	 * PAB_AXI_PIO_CTRL Register
+	 */
+	value = mobiveil_csr_readl(pcie, PAB_AXI_PIO_CTRL);
+	value |= APIO_EN_MASK;
+	mobiveil_csr_writel(pcie, value, PAB_AXI_PIO_CTRL);
+
+	/* Enable PCIe PIO master */
+	value = mobiveil_csr_readl(pcie, PAB_PEX_PIO_CTRL);
+	value |= 1 << PIO_ENABLE_SHIFT;
+	mobiveil_csr_writel(pcie, value, PAB_PEX_PIO_CTRL);
+
+	/*
+	 * we'll program one outbound window for config reads and
+	 * another default inbound window for all the upstream traffic
+	 * rest of the outbound windows will be configured according to
+	 * the "ranges" field defined in device tree
+	 */
+
+	/* config outbound translation window */
+	program_ob_windows(pcie, WIN_NUM_0, rp->ob_io_res->start, 0,
+			   CFG_WINDOW_TYPE, resource_size(rp->ob_io_res));
+
+	/* memory inbound translation window */
+	program_ib_windows(pcie, WIN_NUM_0, 0, 0, MEM_WINDOW_TYPE, IB_WIN_SIZE);
+
+	/* Get the I/O and memory ranges from DT */
+	resource_list_for_each_entry(win, &bridge->windows) {
+		if (resource_type(win->res) == IORESOURCE_MEM)
+			type = MEM_WINDOW_TYPE;
+		else if (resource_type(win->res) == IORESOURCE_IO)
+			type = IO_WINDOW_TYPE;
+		else
+			continue;
+
+		/* configure outbound translation window */
+		program_ob_windows(pcie, pcie->ob_wins_configured,
+				   win->res->start,
+				   win->res->start - win->offset,
+				   type, resource_size(win->res));
+	}
+
+	/* fixup for PCIe class register */
+	value = mobiveil_csr_readl(pcie, PAB_INTP_AXI_PIO_CLASS);
+	value &= 0xff;
+	value |= (PCI_CLASS_BRIDGE_PCI << 16);
+	mobiveil_csr_writel(pcie, value, PAB_INTP_AXI_PIO_CLASS);
+
+	return 0;
+}
+
+static void mobiveil_mask_intx_irq(struct irq_data *data)
+{
+	struct irq_desc *desc = irq_to_desc(data->irq);
+	struct mobiveil_pcie *pcie;
+	struct mobiveil_root_port *rp;
+	unsigned long flags;
+	u32 mask, shifted_val;
+
+	pcie = irq_desc_get_chip_data(desc);
+	rp = &pcie->rp;
+	mask = 1 << ((data->hwirq + PAB_INTX_START) - 1);
+	raw_spin_lock_irqsave(&rp->intx_mask_lock, flags);
+	shifted_val = mobiveil_csr_readl(pcie, PAB_INTP_AMBA_MISC_ENB);
+	shifted_val &= ~mask;
+	mobiveil_csr_writel(pcie, shifted_val, PAB_INTP_AMBA_MISC_ENB);
+	raw_spin_unlock_irqrestore(&rp->intx_mask_lock, flags);
+}
+
+static void mobiveil_unmask_intx_irq(struct irq_data *data)
+{
+	struct irq_desc *desc = irq_to_desc(data->irq);
+	struct mobiveil_pcie *pcie;
+	struct mobiveil_root_port *rp;
+	unsigned long flags;
+	u32 shifted_val, mask;
+
+	pcie = irq_desc_get_chip_data(desc);
+	rp = &pcie->rp;
+	mask = 1 << ((data->hwirq + PAB_INTX_START) - 1);
+	raw_spin_lock_irqsave(&rp->intx_mask_lock, flags);
+	shifted_val = mobiveil_csr_readl(pcie, PAB_INTP_AMBA_MISC_ENB);
+	shifted_val |= mask;
+	mobiveil_csr_writel(pcie, shifted_val, PAB_INTP_AMBA_MISC_ENB);
+	raw_spin_unlock_irqrestore(&rp->intx_mask_lock, flags);
+}
+
+static struct irq_chip intx_irq_chip = {
+	.name = "mobiveil_pcie:intx",
+	.irq_enable = mobiveil_unmask_intx_irq,
+	.irq_disable = mobiveil_mask_intx_irq,
+	.irq_mask = mobiveil_mask_intx_irq,
+	.irq_unmask = mobiveil_unmask_intx_irq,
+};
+
+/* routine to setup the INTx related data */
+static int mobiveil_pcie_intx_map(struct irq_domain *domain, unsigned int irq,
+				  irq_hw_number_t hwirq)
+{
+	irq_set_chip_and_handler(irq, &intx_irq_chip, handle_level_irq);
+	irq_set_chip_data(irq, domain->host_data);
+
+	return 0;
+}
+
+/* INTx domain operations structure */
+static const struct irq_domain_ops intx_domain_ops = {
+	.map = mobiveil_pcie_intx_map,
+};
+
+static struct irq_chip mobiveil_msi_irq_chip = {
+	.name = "Mobiveil PCIe MSI",
+	.irq_mask = pci_msi_mask_irq,
+	.irq_unmask = pci_msi_unmask_irq,
+};
+
+static struct msi_domain_info mobiveil_msi_domain_info = {
+	.flags	= (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
+		   MSI_FLAG_PCI_MSIX),
+	.chip	= &mobiveil_msi_irq_chip,
+};
+
+static void mobiveil_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
+{
+	struct mobiveil_pcie *pcie = irq_data_get_irq_chip_data(data);
+	phys_addr_t addr = pcie->pcie_reg_base + (data->hwirq * sizeof(int));
+
+	msg->address_lo = lower_32_bits(addr);
+	msg->address_hi = upper_32_bits(addr);
+	msg->data = data->hwirq;
+
+	dev_dbg(&pcie->pdev->dev, "msi#%d address_hi %#x address_lo %#x\n",
+		(int)data->hwirq, msg->address_hi, msg->address_lo);
+}
+
+static int mobiveil_msi_set_affinity(struct irq_data *irq_data,
+				     const struct cpumask *mask, bool force)
+{
+	return -EINVAL;
+}
+
+static struct irq_chip mobiveil_msi_bottom_irq_chip = {
+	.name			= "Mobiveil MSI",
+	.irq_compose_msi_msg	= mobiveil_compose_msi_msg,
+	.irq_set_affinity	= mobiveil_msi_set_affinity,
+};
+
+static int mobiveil_irq_msi_domain_alloc(struct irq_domain *domain,
+					 unsigned int virq,
+					 unsigned int nr_irqs, void *args)
+{
+	struct mobiveil_pcie *pcie = domain->host_data;
+	struct mobiveil_msi *msi = &pcie->rp.msi;
+	unsigned long bit;
+
+	WARN_ON(nr_irqs != 1);
+	mutex_lock(&msi->lock);
+
+	bit = find_first_zero_bit(msi->msi_irq_in_use, msi->num_of_vectors);
+	if (bit >= msi->num_of_vectors) {
+		mutex_unlock(&msi->lock);
+		return -ENOSPC;
+	}
+
+	set_bit(bit, msi->msi_irq_in_use);
+
+	mutex_unlock(&msi->lock);
+
+	irq_domain_set_info(domain, virq, bit, &mobiveil_msi_bottom_irq_chip,
+			    domain->host_data, handle_level_irq, NULL, NULL);
+	return 0;
+}
+
+static void mobiveil_irq_msi_domain_free(struct irq_domain *domain,
+					 unsigned int virq,
+					 unsigned int nr_irqs)
+{
+	struct irq_data *d = irq_domain_get_irq_data(domain, virq);
+	struct mobiveil_pcie *pcie = irq_data_get_irq_chip_data(d);
+	struct mobiveil_msi *msi = &pcie->rp.msi;
+
+	mutex_lock(&msi->lock);
+
+	if (!test_bit(d->hwirq, msi->msi_irq_in_use))
+		dev_err(&pcie->pdev->dev, "trying to free unused MSI#%lu\n",
+			d->hwirq);
+	else
+		__clear_bit(d->hwirq, msi->msi_irq_in_use);
+
+	mutex_unlock(&msi->lock);
+}
+static const struct irq_domain_ops msi_domain_ops = {
+	.alloc	= mobiveil_irq_msi_domain_alloc,
+	.free	= mobiveil_irq_msi_domain_free,
+};
+
+static int mobiveil_allocate_msi_domains(struct mobiveil_pcie *pcie)
+{
+	struct device *dev = &pcie->pdev->dev;
+	struct fwnode_handle *fwnode = of_node_to_fwnode(dev->of_node);
+	struct mobiveil_msi *msi = &pcie->rp.msi;
+
+	mutex_init(&msi->lock);
+	msi->dev_domain = irq_domain_add_linear(NULL, msi->num_of_vectors,
+						&msi_domain_ops, pcie);
+	if (!msi->dev_domain) {
+		dev_err(dev, "failed to create IRQ domain\n");
+		return -ENOMEM;
+	}
+
+	msi->msi_domain = pci_msi_create_irq_domain(fwnode,
+						    &mobiveil_msi_domain_info,
+						    msi->dev_domain);
+	if (!msi->msi_domain) {
+		dev_err(dev, "failed to create MSI domain\n");
+		irq_domain_remove(msi->dev_domain);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static int mobiveil_pcie_init_irq_domain(struct mobiveil_pcie *pcie)
+{
+	struct device *dev = &pcie->pdev->dev;
+	struct device_node *node = dev->of_node;
+	struct mobiveil_root_port *rp = &pcie->rp;
+	int ret;
+
+	/* setup INTx */
+	rp->intx_domain = irq_domain_add_linear(node, PCI_NUM_INTX,
+						&intx_domain_ops, pcie);
+
+	if (!rp->intx_domain) {
+		dev_err(dev, "Failed to get a INTx IRQ domain\n");
+		return -ENOMEM;
+	}
+
+	raw_spin_lock_init(&rp->intx_mask_lock);
+
+	/* setup MSI */
+	ret = mobiveil_allocate_msi_domains(pcie);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int mobiveil_pcie_integrated_interrupt_init(struct mobiveil_pcie *pcie)
+{
+	struct platform_device *pdev = pcie->pdev;
+	struct device *dev = &pdev->dev;
+	struct mobiveil_root_port *rp = &pcie->rp;
+	struct resource *res;
+	int ret;
+
+	/* map MSI config resource */
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "apb_csr");
+	pcie->apb_csr_base = devm_pci_remap_cfg_resource(dev, res);
+	if (IS_ERR(pcie->apb_csr_base))
+		return PTR_ERR(pcie->apb_csr_base);
+
+	/* setup MSI hardware registers */
+	mobiveil_pcie_enable_msi(pcie);
+
+	rp->irq = platform_get_irq(pdev, 0);
+	if (rp->irq <= 0) {
+		dev_err(dev, "failed to map IRQ: %d\n", rp->irq);
+		return -ENODEV;
+	}
+
+	/* initialize the IRQ domains */
+	ret = mobiveil_pcie_init_irq_domain(pcie);
+	if (ret) {
+		dev_err(dev, "Failed creating IRQ Domain\n");
+		return ret;
+	}
+
+	irq_set_chained_handler_and_data(rp->irq, mobiveil_pcie_isr, pcie);
+
+	/* Enable interrupts */
+	mobiveil_csr_writel(pcie, (PAB_INTP_INTX_MASK | PAB_INTP_MSI_MASK),
+			    PAB_INTP_AMBA_MISC_ENB);
+
+
+	return 0;
+}
+
+static int mobiveil_pcie_interrupt_init(struct mobiveil_pcie *pcie)
+{
+	struct mobiveil_root_port *rp = &pcie->rp;
+
+	if (rp->ops->interrupt_init)
+		return rp->ops->interrupt_init(pcie);
+
+	return mobiveil_pcie_integrated_interrupt_init(pcie);
+}
+
+static bool mobiveil_pcie_is_bridge(struct mobiveil_pcie *pcie)
+{
+	u32 header_type;
+
+	header_type = mobiveil_csr_readb(pcie, PCI_HEADER_TYPE);
+	header_type &= 0x7f;
+
+	return header_type == PCI_HEADER_TYPE_BRIDGE;
+}
+
+int mobiveil_pcie_host_probe(struct mobiveil_pcie *pcie)
+{
+	struct mobiveil_root_port *rp = &pcie->rp;
+	struct pci_host_bridge *bridge = rp->bridge;
+	struct device *dev = &pcie->pdev->dev;
+	struct pci_bus *bus;
+	struct pci_bus *child;
+	int ret;
+
+	ret = mobiveil_pcie_parse_dt(pcie);
+	if (ret) {
+		dev_err(dev, "Parsing DT failed, ret: %x\n", ret);
+		return ret;
+	}
+
+	if (!mobiveil_pcie_is_bridge(pcie))
+		return -ENODEV;
+
+	/* parse the host bridge base addresses from the device tree file */
+	ret = pci_parse_request_of_pci_ranges(dev, &bridge->windows,
+					      &bridge->dma_ranges, NULL);
+	if (ret) {
+		dev_err(dev, "Getting bridge resources failed\n");
+		return ret;
+	}
+
+	/*
+	 * configure all inbound and outbound windows and prepare the RC for
+	 * config access
+	 */
+	ret = mobiveil_host_init(pcie, false);
+	if (ret) {
+		dev_err(dev, "Failed to initialize host\n");
+		return ret;
+	}
+
+	ret = mobiveil_pcie_interrupt_init(pcie);
+	if (ret) {
+		dev_err(dev, "Interrupt init failed\n");
+		return ret;
+	}
+
+	/* Initialize bridge */
+	bridge->dev.parent = dev;
+	bridge->sysdata = pcie;
+	bridge->busnr = rp->root_bus_nr;
+	bridge->ops = &mobiveil_pcie_ops;
+	bridge->map_irq = of_irq_parse_and_map_pci;
+	bridge->swizzle_irq = pci_common_swizzle;
+
+	ret = mobiveil_bringup_link(pcie);
+	if (ret) {
+		dev_info(dev, "link bring-up failed\n");
+		return ret;
+	}
+
+	/* setup the kernel resources for the newly added PCIe root bus */
+	ret = pci_scan_root_bus_bridge(bridge);
+	if (ret)
+		return ret;
+
+	bus = bridge->bus;
+
+	pci_assign_unassigned_bus_resources(bus);
+	list_for_each_entry(child, &bus->children, node)
+		pcie_bus_configure_settings(child);
+	pci_bus_add_devices(bus);
+
+	return 0;
+}
diff --git a/drivers/pci/controller/mobiveil/pcie-mobiveil-plat.c b/drivers/pci/controller/mobiveil/pcie-mobiveil-plat.c
new file mode 100644
index 0000000..f6fcd95c2
--- /dev/null
+++ b/drivers/pci/controller/mobiveil/pcie-mobiveil-plat.c
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PCIe host controller driver for Mobiveil PCIe Host controller
+ *
+ * Copyright (c) 2018 Mobiveil Inc.
+ * Copyright 2019 NXP
+ *
+ * Author: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
+ *	   Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_pci.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "pcie-mobiveil.h"
+
+static int mobiveil_pcie_probe(struct platform_device *pdev)
+{
+	struct mobiveil_pcie *pcie;
+	struct pci_host_bridge *bridge;
+	struct device *dev = &pdev->dev;
+
+	/* allocate the PCIe port */
+	bridge = devm_pci_alloc_host_bridge(dev, sizeof(*pcie));
+	if (!bridge)
+		return -ENOMEM;
+
+	pcie = pci_host_bridge_priv(bridge);
+	pcie->rp.bridge = bridge;
+
+	pcie->pdev = pdev;
+
+	return mobiveil_pcie_host_probe(pcie);
+}
+
+static const struct of_device_id mobiveil_pcie_of_match[] = {
+	{.compatible = "mbvl,gpex40-pcie",},
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, mobiveil_pcie_of_match);
+
+static struct platform_driver mobiveil_pcie_driver = {
+	.probe = mobiveil_pcie_probe,
+	.driver = {
+		.name = "mobiveil-pcie",
+		.of_match_table = mobiveil_pcie_of_match,
+		.suppress_bind_attrs = true,
+	},
+};
+
+builtin_platform_driver(mobiveil_pcie_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Mobiveil PCIe host controller driver");
+MODULE_AUTHOR("Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>");
diff --git a/drivers/pci/controller/mobiveil/pcie-mobiveil.c b/drivers/pci/controller/mobiveil/pcie-mobiveil.c
new file mode 100644
index 0000000..62ecbae
--- /dev/null
+++ b/drivers/pci/controller/mobiveil/pcie-mobiveil.c
@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PCIe host controller driver for Mobiveil PCIe Host controller
+ *
+ * Copyright (c) 2018 Mobiveil Inc.
+ * Copyright 2019 NXP
+ *
+ * Author: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
+ *	   Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+
+#include "pcie-mobiveil.h"
+
+/*
+ * mobiveil_pcie_sel_page - routine to access paged register
+ *
+ * Registers whose address greater than PAGED_ADDR_BNDRY (0xc00) are paged,
+ * for this scheme to work extracted higher 6 bits of the offset will be
+ * written to pg_sel field of PAB_CTRL register and rest of the lower 10
+ * bits enabled with PAGED_ADDR_BNDRY are used as offset of the register.
+ */
+static void mobiveil_pcie_sel_page(struct mobiveil_pcie *pcie, u8 pg_idx)
+{
+	u32 val;
+
+	val = readl(pcie->csr_axi_slave_base + PAB_CTRL);
+	val &= ~(PAGE_SEL_MASK << PAGE_SEL_SHIFT);
+	val |= (pg_idx & PAGE_SEL_MASK) << PAGE_SEL_SHIFT;
+
+	writel(val, pcie->csr_axi_slave_base + PAB_CTRL);
+}
+
+static void __iomem *mobiveil_pcie_comp_addr(struct mobiveil_pcie *pcie,
+					     u32 off)
+{
+	if (off < PAGED_ADDR_BNDRY) {
+		/* For directly accessed registers, clear the pg_sel field */
+		mobiveil_pcie_sel_page(pcie, 0);
+		return pcie->csr_axi_slave_base + off;
+	}
+
+	mobiveil_pcie_sel_page(pcie, OFFSET_TO_PAGE_IDX(off));
+	return pcie->csr_axi_slave_base + OFFSET_TO_PAGE_ADDR(off);
+}
+
+static int mobiveil_pcie_read(void __iomem *addr, int size, u32 *val)
+{
+	if ((uintptr_t)addr & (size - 1)) {
+		*val = 0;
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+	}
+
+	switch (size) {
+	case 4:
+		*val = readl(addr);
+		break;
+	case 2:
+		*val = readw(addr);
+		break;
+	case 1:
+		*val = readb(addr);
+		break;
+	default:
+		*val = 0;
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int mobiveil_pcie_write(void __iomem *addr, int size, u32 val)
+{
+	if ((uintptr_t)addr & (size - 1))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	switch (size) {
+	case 4:
+		writel(val, addr);
+		break;
+	case 2:
+		writew(val, addr);
+		break;
+	case 1:
+		writeb(val, addr);
+		break;
+	default:
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+u32 mobiveil_csr_read(struct mobiveil_pcie *pcie, u32 off, size_t size)
+{
+	void __iomem *addr;
+	u32 val;
+	int ret;
+
+	addr = mobiveil_pcie_comp_addr(pcie, off);
+
+	ret = mobiveil_pcie_read(addr, size, &val);
+	if (ret)
+		dev_err(&pcie->pdev->dev, "read CSR address failed\n");
+
+	return val;
+}
+
+void mobiveil_csr_write(struct mobiveil_pcie *pcie, u32 val, u32 off,
+			       size_t size)
+{
+	void __iomem *addr;
+	int ret;
+
+	addr = mobiveil_pcie_comp_addr(pcie, off);
+
+	ret = mobiveil_pcie_write(addr, size, val);
+	if (ret)
+		dev_err(&pcie->pdev->dev, "write CSR address failed\n");
+}
+
+bool mobiveil_pcie_link_up(struct mobiveil_pcie *pcie)
+{
+	if (pcie->ops->link_up)
+		return pcie->ops->link_up(pcie);
+
+	return (mobiveil_csr_readl(pcie, LTSSM_STATUS) &
+		LTSSM_STATUS_L0_MASK) == LTSSM_STATUS_L0;
+}
+
+void program_ib_windows(struct mobiveil_pcie *pcie, int win_num,
+			u64 cpu_addr, u64 pci_addr, u32 type, u64 size)
+{
+	u32 value;
+	u64 size64 = ~(size - 1);
+
+	if (win_num >= pcie->ppio_wins) {
+		dev_err(&pcie->pdev->dev,
+			"ERROR: max inbound windows reached !\n");
+		return;
+	}
+
+	value = mobiveil_csr_readl(pcie, PAB_PEX_AMAP_CTRL(win_num));
+	value &= ~(AMAP_CTRL_TYPE_MASK << AMAP_CTRL_TYPE_SHIFT | WIN_SIZE_MASK);
+	value |= type << AMAP_CTRL_TYPE_SHIFT | 1 << AMAP_CTRL_EN_SHIFT |
+		 (lower_32_bits(size64) & WIN_SIZE_MASK);
+	mobiveil_csr_writel(pcie, value, PAB_PEX_AMAP_CTRL(win_num));
+
+	mobiveil_csr_writel(pcie, upper_32_bits(size64),
+			    PAB_EXT_PEX_AMAP_SIZEN(win_num));
+
+	mobiveil_csr_writel(pcie, lower_32_bits(cpu_addr),
+			    PAB_PEX_AMAP_AXI_WIN(win_num));
+	mobiveil_csr_writel(pcie, upper_32_bits(cpu_addr),
+			    PAB_EXT_PEX_AMAP_AXI_WIN(win_num));
+
+	mobiveil_csr_writel(pcie, lower_32_bits(pci_addr),
+			    PAB_PEX_AMAP_PEX_WIN_L(win_num));
+	mobiveil_csr_writel(pcie, upper_32_bits(pci_addr),
+			    PAB_PEX_AMAP_PEX_WIN_H(win_num));
+
+	pcie->ib_wins_configured++;
+}
+
+/*
+ * routine to program the outbound windows
+ */
+void program_ob_windows(struct mobiveil_pcie *pcie, int win_num,
+			u64 cpu_addr, u64 pci_addr, u32 type, u64 size)
+{
+	u32 value;
+	u64 size64 = ~(size - 1);
+
+	if (win_num >= pcie->apio_wins) {
+		dev_err(&pcie->pdev->dev,
+			"ERROR: max outbound windows reached !\n");
+		return;
+	}
+
+	/*
+	 * program Enable Bit to 1, Type Bit to (00) base 2, AXI Window Size Bit
+	 * to 4 KB in PAB_AXI_AMAP_CTRL register
+	 */
+	value = mobiveil_csr_readl(pcie, PAB_AXI_AMAP_CTRL(win_num));
+	value &= ~(WIN_TYPE_MASK << WIN_TYPE_SHIFT | WIN_SIZE_MASK);
+	value |= 1 << WIN_ENABLE_SHIFT | type << WIN_TYPE_SHIFT |
+		 (lower_32_bits(size64) & WIN_SIZE_MASK);
+	mobiveil_csr_writel(pcie, value, PAB_AXI_AMAP_CTRL(win_num));
+
+	mobiveil_csr_writel(pcie, upper_32_bits(size64),
+			    PAB_EXT_AXI_AMAP_SIZE(win_num));
+
+	/*
+	 * program AXI window base with appropriate value in
+	 * PAB_AXI_AMAP_AXI_WIN0 register
+	 */
+	mobiveil_csr_writel(pcie,
+			    lower_32_bits(cpu_addr) & (~AXI_WINDOW_ALIGN_MASK),
+			    PAB_AXI_AMAP_AXI_WIN(win_num));
+	mobiveil_csr_writel(pcie, upper_32_bits(cpu_addr),
+			    PAB_EXT_AXI_AMAP_AXI_WIN(win_num));
+
+	mobiveil_csr_writel(pcie, lower_32_bits(pci_addr),
+			    PAB_AXI_AMAP_PEX_WIN_L(win_num));
+	mobiveil_csr_writel(pcie, upper_32_bits(pci_addr),
+			    PAB_AXI_AMAP_PEX_WIN_H(win_num));
+
+	pcie->ob_wins_configured++;
+}
+
+int mobiveil_bringup_link(struct mobiveil_pcie *pcie)
+{
+	int retries;
+
+	/* check if the link is up or not */
+	for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
+		if (mobiveil_pcie_link_up(pcie))
+			return 0;
+
+		usleep_range(LINK_WAIT_MIN, LINK_WAIT_MAX);
+	}
+
+	dev_err(&pcie->pdev->dev, "link never came up\n");
+
+	return -ETIMEDOUT;
+}
diff --git a/drivers/pci/controller/mobiveil/pcie-mobiveil.h b/drivers/pci/controller/mobiveil/pcie-mobiveil.h
new file mode 100644
index 0000000..767e36a
--- /dev/null
+++ b/drivers/pci/controller/mobiveil/pcie-mobiveil.h
@@ -0,0 +1,226 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * PCIe host controller driver for Mobiveil PCIe Host controller
+ *
+ * Copyright (c) 2018 Mobiveil Inc.
+ * Copyright 2019 NXP
+ *
+ * Author: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
+ *	   Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
+ */
+
+#ifndef _PCIE_MOBIVEIL_H
+#define _PCIE_MOBIVEIL_H
+
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/msi.h>
+#include "../../pci.h"
+
+/* register offsets and bit positions */
+
+/*
+ * translation tables are grouped into windows, each window registers are
+ * grouped into blocks of 4 or 16 registers each
+ */
+#define PAB_REG_BLOCK_SIZE		16
+#define PAB_EXT_REG_BLOCK_SIZE		4
+
+#define PAB_REG_ADDR(offset, win)	\
+	(offset + (win * PAB_REG_BLOCK_SIZE))
+#define PAB_EXT_REG_ADDR(offset, win)	\
+	(offset + (win * PAB_EXT_REG_BLOCK_SIZE))
+
+#define LTSSM_STATUS			0x0404
+#define  LTSSM_STATUS_L0_MASK		0x3f
+#define  LTSSM_STATUS_L0		0x2d
+
+#define PAB_CTRL			0x0808
+#define  AMBA_PIO_ENABLE_SHIFT		0
+#define  PEX_PIO_ENABLE_SHIFT		1
+#define  PAGE_SEL_SHIFT			13
+#define  PAGE_SEL_MASK			0x3f
+#define  PAGE_LO_MASK			0x3ff
+#define  PAGE_SEL_OFFSET_SHIFT		10
+
+#define PAB_ACTIVITY_STAT		0x81c
+
+#define PAB_AXI_PIO_CTRL		0x0840
+#define  APIO_EN_MASK			0xf
+
+#define PAB_PEX_PIO_CTRL		0x08c0
+#define  PIO_ENABLE_SHIFT		0
+
+#define PAB_INTP_AMBA_MISC_ENB		0x0b0c
+#define PAB_INTP_AMBA_MISC_STAT		0x0b1c
+#define  PAB_INTP_RESET			BIT(1)
+#define  PAB_INTP_MSI			BIT(3)
+#define  PAB_INTP_INTA			BIT(5)
+#define  PAB_INTP_INTB			BIT(6)
+#define  PAB_INTP_INTC			BIT(7)
+#define  PAB_INTP_INTD			BIT(8)
+#define  PAB_INTP_PCIE_UE		BIT(9)
+#define  PAB_INTP_IE_PMREDI		BIT(29)
+#define  PAB_INTP_IE_EC			BIT(30)
+#define  PAB_INTP_MSI_MASK		PAB_INTP_MSI
+#define  PAB_INTP_INTX_MASK		(PAB_INTP_INTA | PAB_INTP_INTB |\
+					PAB_INTP_INTC | PAB_INTP_INTD)
+
+#define PAB_AXI_AMAP_CTRL(win)		PAB_REG_ADDR(0x0ba0, win)
+#define  WIN_ENABLE_SHIFT		0
+#define  WIN_TYPE_SHIFT			1
+#define  WIN_TYPE_MASK			0x3
+#define  WIN_SIZE_MASK			0xfffffc00
+
+#define PAB_EXT_AXI_AMAP_SIZE(win)	PAB_EXT_REG_ADDR(0xbaf0, win)
+
+#define PAB_EXT_AXI_AMAP_AXI_WIN(win)	PAB_EXT_REG_ADDR(0x80a0, win)
+#define PAB_AXI_AMAP_AXI_WIN(win)	PAB_REG_ADDR(0x0ba4, win)
+#define  AXI_WINDOW_ALIGN_MASK		3
+
+#define PAB_AXI_AMAP_PEX_WIN_L(win)	PAB_REG_ADDR(0x0ba8, win)
+#define  PAB_BUS_SHIFT			24
+#define  PAB_DEVICE_SHIFT		19
+#define  PAB_FUNCTION_SHIFT		16
+
+#define PAB_AXI_AMAP_PEX_WIN_H(win)	PAB_REG_ADDR(0x0bac, win)
+#define PAB_INTP_AXI_PIO_CLASS		0x474
+
+#define PAB_PEX_AMAP_CTRL(win)		PAB_REG_ADDR(0x4ba0, win)
+#define  AMAP_CTRL_EN_SHIFT		0
+#define  AMAP_CTRL_TYPE_SHIFT		1
+#define  AMAP_CTRL_TYPE_MASK		3
+
+#define PAB_EXT_PEX_AMAP_SIZEN(win)	PAB_EXT_REG_ADDR(0xbef0, win)
+#define PAB_EXT_PEX_AMAP_AXI_WIN(win)	PAB_EXT_REG_ADDR(0xb4a0, win)
+#define PAB_PEX_AMAP_AXI_WIN(win)	PAB_REG_ADDR(0x4ba4, win)
+#define PAB_PEX_AMAP_PEX_WIN_L(win)	PAB_REG_ADDR(0x4ba8, win)
+#define PAB_PEX_AMAP_PEX_WIN_H(win)	PAB_REG_ADDR(0x4bac, win)
+
+/* starting offset of INTX bits in status register */
+#define PAB_INTX_START			5
+
+/* supported number of MSI interrupts */
+#define PCI_NUM_MSI			16
+
+/* MSI registers */
+#define MSI_BASE_LO_OFFSET		0x04
+#define MSI_BASE_HI_OFFSET		0x08
+#define MSI_SIZE_OFFSET			0x0c
+#define MSI_ENABLE_OFFSET		0x14
+#define MSI_STATUS_OFFSET		0x18
+#define MSI_DATA_OFFSET			0x20
+#define MSI_ADDR_L_OFFSET		0x24
+#define MSI_ADDR_H_OFFSET		0x28
+
+/* outbound and inbound window definitions */
+#define WIN_NUM_0			0
+#define WIN_NUM_1			1
+#define CFG_WINDOW_TYPE			0
+#define IO_WINDOW_TYPE			1
+#define MEM_WINDOW_TYPE			2
+#define IB_WIN_SIZE			((u64)256 * 1024 * 1024 * 1024)
+#define MAX_PIO_WINDOWS			8
+
+/* Parameters for the waiting for link up routine */
+#define LINK_WAIT_MAX_RETRIES		10
+#define LINK_WAIT_MIN			90000
+#define LINK_WAIT_MAX			100000
+
+#define PAGED_ADDR_BNDRY		0xc00
+#define OFFSET_TO_PAGE_ADDR(off)	\
+	((off & PAGE_LO_MASK) | PAGED_ADDR_BNDRY)
+#define OFFSET_TO_PAGE_IDX(off)		\
+	((off >> PAGE_SEL_OFFSET_SHIFT) & PAGE_SEL_MASK)
+
+struct mobiveil_msi {			/* MSI information */
+	struct mutex lock;		/* protect bitmap variable */
+	struct irq_domain *msi_domain;
+	struct irq_domain *dev_domain;
+	phys_addr_t msi_pages_phys;
+	int num_of_vectors;
+	DECLARE_BITMAP(msi_irq_in_use, PCI_NUM_MSI);
+};
+
+struct mobiveil_pcie;
+
+struct mobiveil_rp_ops {
+	int (*interrupt_init)(struct mobiveil_pcie *pcie);
+};
+
+struct mobiveil_root_port {
+	char root_bus_nr;
+	void __iomem *config_axi_slave_base;	/* endpoint config base */
+	struct resource *ob_io_res;
+	struct mobiveil_rp_ops *ops;
+	int irq;
+	raw_spinlock_t intx_mask_lock;
+	struct irq_domain *intx_domain;
+	struct mobiveil_msi msi;
+	struct pci_host_bridge *bridge;
+};
+
+struct mobiveil_pab_ops {
+	int (*link_up)(struct mobiveil_pcie *pcie);
+};
+
+struct mobiveil_pcie {
+	struct platform_device *pdev;
+	void __iomem *csr_axi_slave_base;	/* root port config base */
+	void __iomem *apb_csr_base;	/* MSI register base */
+	phys_addr_t pcie_reg_base;	/* Physical PCIe Controller Base */
+	int apio_wins;
+	int ppio_wins;
+	int ob_wins_configured;		/* configured outbound windows */
+	int ib_wins_configured;		/* configured inbound windows */
+	const struct mobiveil_pab_ops *ops;
+	struct mobiveil_root_port rp;
+};
+
+int mobiveil_pcie_host_probe(struct mobiveil_pcie *pcie);
+int mobiveil_host_init(struct mobiveil_pcie *pcie, bool reinit);
+bool mobiveil_pcie_link_up(struct mobiveil_pcie *pcie);
+int mobiveil_bringup_link(struct mobiveil_pcie *pcie);
+void program_ob_windows(struct mobiveil_pcie *pcie, int win_num, u64 cpu_addr,
+			u64 pci_addr, u32 type, u64 size);
+void program_ib_windows(struct mobiveil_pcie *pcie, int win_num, u64 cpu_addr,
+			u64 pci_addr, u32 type, u64 size);
+u32 mobiveil_csr_read(struct mobiveil_pcie *pcie, u32 off, size_t size);
+void mobiveil_csr_write(struct mobiveil_pcie *pcie, u32 val, u32 off,
+			size_t size);
+
+static inline u32 mobiveil_csr_readl(struct mobiveil_pcie *pcie, u32 off)
+{
+	return mobiveil_csr_read(pcie, off, 0x4);
+}
+
+static inline u16 mobiveil_csr_readw(struct mobiveil_pcie *pcie, u32 off)
+{
+	return mobiveil_csr_read(pcie, off, 0x2);
+}
+
+static inline u8 mobiveil_csr_readb(struct mobiveil_pcie *pcie, u32 off)
+{
+	return mobiveil_csr_read(pcie, off, 0x1);
+}
+
+
+static inline void mobiveil_csr_writel(struct mobiveil_pcie *pcie, u32 val,
+				       u32 off)
+{
+	mobiveil_csr_write(pcie, val, off, 0x4);
+}
+
+static inline void mobiveil_csr_writew(struct mobiveil_pcie *pcie, u16 val,
+				       u32 off)
+{
+	mobiveil_csr_write(pcie, val, off, 0x2);
+}
+
+static inline void mobiveil_csr_writeb(struct mobiveil_pcie *pcie, u8 val,
+				       u32 off)
+{
+	mobiveil_csr_write(pcie, val, off, 0x1);
+}
+
+#endif /* _PCIE_MOBIVEIL_H */
diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
index 9977abf..e15022f 100644
--- a/drivers/pci/controller/pci-hyperv.c
+++ b/drivers/pci/controller/pci-hyperv.c
@@ -63,6 +63,7 @@
 enum pci_protocol_version_t {
 	PCI_PROTOCOL_VERSION_1_1 = PCI_MAKE_VERSION(1, 1),	/* Win10 */
 	PCI_PROTOCOL_VERSION_1_2 = PCI_MAKE_VERSION(1, 2),	/* RS1 */
+	PCI_PROTOCOL_VERSION_1_3 = PCI_MAKE_VERSION(1, 3),	/* Vibranium */
 };
 
 #define CPU_AFFINITY_ALL	-1ULL
@@ -72,6 +73,7 @@ enum pci_protocol_version_t {
  * first.
  */
 static enum pci_protocol_version_t pci_protocol_versions[] = {
+	PCI_PROTOCOL_VERSION_1_3,
 	PCI_PROTOCOL_VERSION_1_2,
 	PCI_PROTOCOL_VERSION_1_1,
 };
@@ -119,6 +121,7 @@ enum pci_message_type {
 	PCI_RESOURCES_ASSIGNED2		= PCI_MESSAGE_BASE + 0x16,
 	PCI_CREATE_INTERRUPT_MESSAGE2	= PCI_MESSAGE_BASE + 0x17,
 	PCI_DELETE_INTERRUPT_MESSAGE2	= PCI_MESSAGE_BASE + 0x18, /* unused */
+	PCI_BUS_RELATIONS2		= PCI_MESSAGE_BASE + 0x19,
 	PCI_MESSAGE_MAXIMUM
 };
 
@@ -164,6 +167,26 @@ struct pci_function_description {
 	u32	ser;	/* serial number */
 } __packed;
 
+enum pci_device_description_flags {
+	HV_PCI_DEVICE_FLAG_NONE			= 0x0,
+	HV_PCI_DEVICE_FLAG_NUMA_AFFINITY	= 0x1,
+};
+
+struct pci_function_description2 {
+	u16	v_id;	/* vendor ID */
+	u16	d_id;	/* device ID */
+	u8	rev;
+	u8	prog_intf;
+	u8	subclass;
+	u8	base_class;
+	u32	subsystem_id;
+	union	win_slot_encoding win_slot;
+	u32	ser;	/* serial number */
+	u32	flags;
+	u16	virtual_numa_node;
+	u16	reserved;
+} __packed;
+
 /**
  * struct hv_msi_desc
  * @vector:		IDT entry
@@ -260,7 +283,7 @@ struct pci_packet {
 				int resp_packet_size);
 	void *compl_ctxt;
 
-	struct pci_message message[0];
+	struct pci_message message[];
 };
 
 /*
@@ -296,7 +319,13 @@ struct pci_bus_d0_entry {
 struct pci_bus_relations {
 	struct pci_incoming_message incoming;
 	u32 device_count;
-	struct pci_function_description func[0];
+	struct pci_function_description func[];
+} __packed;
+
+struct pci_bus_relations2 {
+	struct pci_incoming_message incoming;
+	u32 device_count;
+	struct pci_function_description2 func[];
 } __packed;
 
 struct pci_q_res_req_response {
@@ -407,42 +436,6 @@ struct pci_eject_response {
 static int pci_ring_size = (4 * PAGE_SIZE);
 
 /*
- * Definitions or interrupt steering hypercall.
- */
-#define HV_PARTITION_ID_SELF		((u64)-1)
-#define HVCALL_RETARGET_INTERRUPT	0x7e
-
-struct hv_interrupt_entry {
-	u32	source;			/* 1 for MSI(-X) */
-	u32	reserved1;
-	u32	address;
-	u32	data;
-};
-
-/*
- * flags for hv_device_interrupt_target.flags
- */
-#define HV_DEVICE_INTERRUPT_TARGET_MULTICAST		1
-#define HV_DEVICE_INTERRUPT_TARGET_PROCESSOR_SET	2
-
-struct hv_device_interrupt_target {
-	u32	vector;
-	u32	flags;
-	union {
-		u64		 vp_mask;
-		struct hv_vpset vp_set;
-	};
-};
-
-struct retarget_msi_interrupt {
-	u64	partition_id;		/* use "self" */
-	u64	device_id;
-	struct hv_interrupt_entry int_entry;
-	u64	reserved2;
-	struct hv_device_interrupt_target int_target;
-} __packed __aligned(8);
-
-/*
  * Driver specific state.
  */
 
@@ -488,7 +481,7 @@ struct hv_pcibus_device {
 	struct workqueue_struct *wq;
 
 	/* hypercall arg, must not cross page boundary */
-	struct retarget_msi_interrupt retarget_msi_interrupt_params;
+	struct hv_retarget_device_interrupt retarget_msi_interrupt_params;
 
 	/*
 	 * Don't put anything here: retarget_msi_interrupt_params must be last
@@ -505,10 +498,24 @@ struct hv_dr_work {
 	struct hv_pcibus_device *bus;
 };
 
+struct hv_pcidev_description {
+	u16	v_id;	/* vendor ID */
+	u16	d_id;	/* device ID */
+	u8	rev;
+	u8	prog_intf;
+	u8	subclass;
+	u8	base_class;
+	u32	subsystem_id;
+	union	win_slot_encoding win_slot;
+	u32	ser;	/* serial number */
+	u32	flags;
+	u16	virtual_numa_node;
+};
+
 struct hv_dr_state {
 	struct list_head list_entry;
 	u32 device_count;
-	struct pci_function_description func[0];
+	struct hv_pcidev_description func[];
 };
 
 enum hv_pcichild_state {
@@ -525,7 +532,7 @@ struct hv_pci_dev {
 	refcount_t refs;
 	enum hv_pcichild_state state;
 	struct pci_slot *pci_slot;
-	struct pci_function_description desc;
+	struct hv_pcidev_description desc;
 	bool reported_missing;
 	struct hv_pcibus_device *hbus;
 	struct work_struct wrk;
@@ -1184,7 +1191,7 @@ static void hv_irq_unmask(struct irq_data *data)
 {
 	struct msi_desc *msi_desc = irq_data_get_msi_desc(data);
 	struct irq_cfg *cfg = irqd_cfg(data);
-	struct retarget_msi_interrupt *params;
+	struct hv_retarget_device_interrupt *params;
 	struct hv_pcibus_device *hbus;
 	struct cpumask *dest;
 	cpumask_var_t tmp;
@@ -1206,8 +1213,7 @@ static void hv_irq_unmask(struct irq_data *data)
 	memset(params, 0, sizeof(*params));
 	params->partition_id = HV_PARTITION_ID_SELF;
 	params->int_entry.source = 1; /* MSI(-X) */
-	params->int_entry.address = msi_desc->msg.address_lo;
-	params->int_entry.data = msi_desc->msg.data;
+	hv_set_msi_entry_from_desc(&params->int_entry.msi_entry, msi_desc);
 	params->device_id = (hbus->hdev->dev_instance.b[5] << 24) |
 			   (hbus->hdev->dev_instance.b[4] << 16) |
 			   (hbus->hdev->dev_instance.b[7] << 8) |
@@ -1401,6 +1407,7 @@ static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
 		break;
 
 	case PCI_PROTOCOL_VERSION_1_2:
+	case PCI_PROTOCOL_VERSION_1_3:
 		size = hv_compose_msi_req_v2(&ctxt.int_pkts.v2,
 					dest,
 					hpdev->desc.win_slot.slot,
@@ -1799,6 +1806,27 @@ static void hv_pci_remove_slots(struct hv_pcibus_device *hbus)
 	}
 }
 
+/*
+ * Set NUMA node for the devices on the bus
+ */
+static void hv_pci_assign_numa_node(struct hv_pcibus_device *hbus)
+{
+	struct pci_dev *dev;
+	struct pci_bus *bus = hbus->pci_bus;
+	struct hv_pci_dev *hv_dev;
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		hv_dev = get_pcichild_wslot(hbus, devfn_to_wslot(dev->devfn));
+		if (!hv_dev)
+			continue;
+
+		if (hv_dev->desc.flags & HV_PCI_DEVICE_FLAG_NUMA_AFFINITY)
+			set_dev_node(&dev->dev, hv_dev->desc.virtual_numa_node);
+
+		put_pcichild(hv_dev);
+	}
+}
+
 /**
  * create_root_hv_pci_bus() - Expose a new root PCI bus
  * @hbus:	Root PCI bus, as understood by this driver
@@ -1821,6 +1849,7 @@ static int create_root_hv_pci_bus(struct hv_pcibus_device *hbus)
 
 	pci_lock_rescan_remove();
 	pci_scan_child_bus(hbus->pci_bus);
+	hv_pci_assign_numa_node(hbus);
 	pci_bus_assign_resources(hbus->pci_bus);
 	hv_pci_assign_slots(hbus);
 	pci_bus_add_devices(hbus->pci_bus);
@@ -1877,7 +1906,7 @@ static void q_resource_requirements(void *context, struct pci_response *resp,
  * Return: Pointer to the new tracking struct
  */
 static struct hv_pci_dev *new_pcichild_device(struct hv_pcibus_device *hbus,
-		struct pci_function_description *desc)
+		struct hv_pcidev_description *desc)
 {
 	struct hv_pci_dev *hpdev;
 	struct pci_child_message *res_req;
@@ -1988,7 +2017,7 @@ static void pci_devices_present_work(struct work_struct *work)
 {
 	u32 child_no;
 	bool found;
-	struct pci_function_description *new_desc;
+	struct hv_pcidev_description *new_desc;
 	struct hv_pci_dev *hpdev;
 	struct hv_pcibus_device *hbus;
 	struct list_head removed;
@@ -2089,6 +2118,7 @@ static void pci_devices_present_work(struct work_struct *work)
 		 */
 		pci_lock_rescan_remove();
 		pci_scan_child_bus(hbus->pci_bus);
+		hv_pci_assign_numa_node(hbus);
 		hv_pci_assign_slots(hbus);
 		pci_unlock_rescan_remove();
 		break;
@@ -2107,17 +2137,15 @@ static void pci_devices_present_work(struct work_struct *work)
 }
 
 /**
- * hv_pci_devices_present() - Handles list of new children
+ * hv_pci_start_relations_work() - Queue work to start device discovery
  * @hbus:	Root PCI bus, as understood by this driver
- * @relations:	Packet from host listing children
+ * @dr:		The list of children returned from host
  *
- * This function is invoked whenever a new list of devices for
- * this bus appears.
+ * Return:  0 on success, -errno on failure
  */
-static void hv_pci_devices_present(struct hv_pcibus_device *hbus,
-				   struct pci_bus_relations *relations)
+static int hv_pci_start_relations_work(struct hv_pcibus_device *hbus,
+				       struct hv_dr_state *dr)
 {
-	struct hv_dr_state *dr;
 	struct hv_dr_work *dr_wrk;
 	unsigned long flags;
 	bool pending_dr;
@@ -2125,29 +2153,15 @@ static void hv_pci_devices_present(struct hv_pcibus_device *hbus,
 	if (hbus->state == hv_pcibus_removing) {
 		dev_info(&hbus->hdev->device,
 			 "PCI VMBus BUS_RELATIONS: ignored\n");
-		return;
+		return -ENOENT;
 	}
 
 	dr_wrk = kzalloc(sizeof(*dr_wrk), GFP_NOWAIT);
 	if (!dr_wrk)
-		return;
-
-	dr = kzalloc(offsetof(struct hv_dr_state, func) +
-		     (sizeof(struct pci_function_description) *
-		      (relations->device_count)), GFP_NOWAIT);
-	if (!dr)  {
-		kfree(dr_wrk);
-		return;
-	}
+		return -ENOMEM;
 
 	INIT_WORK(&dr_wrk->wrk, pci_devices_present_work);
 	dr_wrk->bus = hbus;
-	dr->device_count = relations->device_count;
-	if (dr->device_count != 0) {
-		memcpy(dr->func, relations->func,
-		       sizeof(struct pci_function_description) *
-		       dr->device_count);
-	}
 
 	spin_lock_irqsave(&hbus->device_list_lock, flags);
 	/*
@@ -2165,6 +2179,87 @@ static void hv_pci_devices_present(struct hv_pcibus_device *hbus,
 		get_hvpcibus(hbus);
 		queue_work(hbus->wq, &dr_wrk->wrk);
 	}
+
+	return 0;
+}
+
+/**
+ * hv_pci_devices_present() - Handle list of new children
+ * @hbus:      Root PCI bus, as understood by this driver
+ * @relations: Packet from host listing children
+ *
+ * Process a new list of devices on the bus. The list of devices is
+ * discovered by VSP and sent to us via VSP message PCI_BUS_RELATIONS,
+ * whenever a new list of devices for this bus appears.
+ */
+static void hv_pci_devices_present(struct hv_pcibus_device *hbus,
+				   struct pci_bus_relations *relations)
+{
+	struct hv_dr_state *dr;
+	int i;
+
+	dr = kzalloc(offsetof(struct hv_dr_state, func) +
+		     (sizeof(struct hv_pcidev_description) *
+		      (relations->device_count)), GFP_NOWAIT);
+
+	if (!dr)
+		return;
+
+	dr->device_count = relations->device_count;
+	for (i = 0; i < dr->device_count; i++) {
+		dr->func[i].v_id = relations->func[i].v_id;
+		dr->func[i].d_id = relations->func[i].d_id;
+		dr->func[i].rev = relations->func[i].rev;
+		dr->func[i].prog_intf = relations->func[i].prog_intf;
+		dr->func[i].subclass = relations->func[i].subclass;
+		dr->func[i].base_class = relations->func[i].base_class;
+		dr->func[i].subsystem_id = relations->func[i].subsystem_id;
+		dr->func[i].win_slot = relations->func[i].win_slot;
+		dr->func[i].ser = relations->func[i].ser;
+	}
+
+	if (hv_pci_start_relations_work(hbus, dr))
+		kfree(dr);
+}
+
+/**
+ * hv_pci_devices_present2() - Handle list of new children
+ * @hbus:	Root PCI bus, as understood by this driver
+ * @relations:	Packet from host listing children
+ *
+ * This function is the v2 version of hv_pci_devices_present()
+ */
+static void hv_pci_devices_present2(struct hv_pcibus_device *hbus,
+				    struct pci_bus_relations2 *relations)
+{
+	struct hv_dr_state *dr;
+	int i;
+
+	dr = kzalloc(offsetof(struct hv_dr_state, func) +
+		     (sizeof(struct hv_pcidev_description) *
+		      (relations->device_count)), GFP_NOWAIT);
+
+	if (!dr)
+		return;
+
+	dr->device_count = relations->device_count;
+	for (i = 0; i < dr->device_count; i++) {
+		dr->func[i].v_id = relations->func[i].v_id;
+		dr->func[i].d_id = relations->func[i].d_id;
+		dr->func[i].rev = relations->func[i].rev;
+		dr->func[i].prog_intf = relations->func[i].prog_intf;
+		dr->func[i].subclass = relations->func[i].subclass;
+		dr->func[i].base_class = relations->func[i].base_class;
+		dr->func[i].subsystem_id = relations->func[i].subsystem_id;
+		dr->func[i].win_slot = relations->func[i].win_slot;
+		dr->func[i].ser = relations->func[i].ser;
+		dr->func[i].flags = relations->func[i].flags;
+		dr->func[i].virtual_numa_node =
+			relations->func[i].virtual_numa_node;
+	}
+
+	if (hv_pci_start_relations_work(hbus, dr))
+		kfree(dr);
 }
 
 /**
@@ -2280,6 +2375,7 @@ static void hv_pci_onchannelcallback(void *context)
 	struct pci_response *response;
 	struct pci_incoming_message *new_message;
 	struct pci_bus_relations *bus_rel;
+	struct pci_bus_relations2 *bus_rel2;
 	struct pci_dev_inval_block *inval;
 	struct pci_dev_incoming *dev_message;
 	struct hv_pci_dev *hpdev;
@@ -2347,6 +2443,21 @@ static void hv_pci_onchannelcallback(void *context)
 				hv_pci_devices_present(hbus, bus_rel);
 				break;
 
+			case PCI_BUS_RELATIONS2:
+
+				bus_rel2 = (struct pci_bus_relations2 *)buffer;
+				if (bytes_recvd <
+				    offsetof(struct pci_bus_relations2, func) +
+				    (sizeof(struct pci_function_description2) *
+				     (bus_rel2->device_count))) {
+					dev_err(&hbus->hdev->device,
+						"bus relations v2 too small\n");
+					break;
+				}
+
+				hv_pci_devices_present2(hbus, bus_rel2);
+				break;
+
 			case PCI_EJECT:
 
 				dev_message = (struct pci_dev_incoming *)buffer;
@@ -2922,7 +3033,7 @@ static int hv_pci_probe(struct hv_device *hdev,
 	 * positive by using kmemleak_alloc() and kmemleak_free() to ask
 	 * kmemleak to track and scan the hbus buffer.
 	 */
-	hbus = (struct hv_pcibus_device *)kzalloc(HV_HYP_PAGE_SIZE, GFP_KERNEL);
+	hbus = kzalloc(HV_HYP_PAGE_SIZE, GFP_KERNEL);
 	if (!hbus)
 		return -ENOMEM;
 	hbus->state = hv_pcibus_init;
@@ -3058,7 +3169,7 @@ static int hv_pci_probe(struct hv_device *hdev,
 free_dom:
 	hv_put_dom_num(hbus->sysdata.domain);
 free_bus:
-	free_page((unsigned long)hbus);
+	kfree(hbus);
 	return ret;
 }
 
@@ -3069,7 +3180,7 @@ static int hv_pci_bus_exit(struct hv_device *hdev, bool hibernating)
 		struct pci_packet teardown_packet;
 		u8 buffer[sizeof(struct pci_message)];
 	} pkt;
-	struct pci_bus_relations relations;
+	struct hv_dr_state *dr;
 	struct hv_pci_compl comp_pkt;
 	int ret;
 
@@ -3082,8 +3193,9 @@ static int hv_pci_bus_exit(struct hv_device *hdev, bool hibernating)
 
 	if (!hibernating) {
 		/* Delete any children which might still exist. */
-		memset(&relations, 0, sizeof(relations));
-		hv_pci_devices_present(hbus, &relations);
+		dr = kzalloc(sizeof(*dr), GFP_KERNEL);
+		if (dr && hv_pci_start_relations_work(hbus, dr))
+			kfree(dr);
 	}
 
 	ret = hv_send_resources_released(hdev);
diff --git a/drivers/pci/controller/pci-tegra.c b/drivers/pci/controller/pci-tegra.c
index 0e03cef..3e64ba6 100644
--- a/drivers/pci/controller/pci-tegra.c
+++ b/drivers/pci/controller/pci-tegra.c
@@ -355,16 +355,6 @@ struct tegra_pcie {
 	int irq;
 
 	struct resource cs;
-	struct resource io;
-	struct resource pio;
-	struct resource mem;
-	struct resource prefetch;
-	struct resource busn;
-
-	struct {
-		resource_size_t mem;
-		resource_size_t io;
-	} offset;
 
 	struct clk *pex_clk;
 	struct clk *afi_clk;
@@ -797,38 +787,6 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, 0x0bf1, tegra_pcie_relax_enable);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, 0x0e1c, tegra_pcie_relax_enable);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, 0x0e1d, tegra_pcie_relax_enable);
 
-static int tegra_pcie_request_resources(struct tegra_pcie *pcie)
-{
-	struct pci_host_bridge *host = pci_host_bridge_from_priv(pcie);
-	struct list_head *windows = &host->windows;
-	struct device *dev = pcie->dev;
-	int err;
-
-	pci_add_resource_offset(windows, &pcie->pio, pcie->offset.io);
-	pci_add_resource_offset(windows, &pcie->mem, pcie->offset.mem);
-	pci_add_resource_offset(windows, &pcie->prefetch, pcie->offset.mem);
-	pci_add_resource(windows, &pcie->busn);
-
-	err = devm_request_pci_bus_resources(dev, windows);
-	if (err < 0) {
-		pci_free_resource_list(windows);
-		return err;
-	}
-
-	pci_remap_iospace(&pcie->pio, pcie->io.start);
-
-	return 0;
-}
-
-static void tegra_pcie_free_resources(struct tegra_pcie *pcie)
-{
-	struct pci_host_bridge *host = pci_host_bridge_from_priv(pcie);
-	struct list_head *windows = &host->windows;
-
-	pci_unmap_iospace(&pcie->pio);
-	pci_free_resource_list(windows);
-}
-
 static int tegra_pcie_map_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
 {
 	struct tegra_pcie *pcie = pdev->bus->sysdata;
@@ -909,36 +867,49 @@ static irqreturn_t tegra_pcie_isr(int irq, void *arg)
  */
 static void tegra_pcie_setup_translations(struct tegra_pcie *pcie)
 {
-	u32 fpci_bar, size, axi_address;
+	u32 size;
+	struct resource_entry *entry;
+	struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie);
 
 	/* Bar 0: type 1 extended configuration space */
 	size = resource_size(&pcie->cs);
 	afi_writel(pcie, pcie->cs.start, AFI_AXI_BAR0_START);
 	afi_writel(pcie, size >> 12, AFI_AXI_BAR0_SZ);
 
-	/* Bar 1: downstream IO bar */
-	fpci_bar = 0xfdfc0000;
-	size = resource_size(&pcie->io);
-	axi_address = pcie->io.start;
-	afi_writel(pcie, axi_address, AFI_AXI_BAR1_START);
-	afi_writel(pcie, size >> 12, AFI_AXI_BAR1_SZ);
-	afi_writel(pcie, fpci_bar, AFI_FPCI_BAR1);
+	resource_list_for_each_entry(entry, &bridge->windows) {
+		u32 fpci_bar, axi_address;
+		struct resource *res = entry->res;
 
-	/* Bar 2: prefetchable memory BAR */
-	fpci_bar = (((pcie->prefetch.start >> 12) & 0x0fffffff) << 4) | 0x1;
-	size = resource_size(&pcie->prefetch);
-	axi_address = pcie->prefetch.start;
-	afi_writel(pcie, axi_address, AFI_AXI_BAR2_START);
-	afi_writel(pcie, size >> 12, AFI_AXI_BAR2_SZ);
-	afi_writel(pcie, fpci_bar, AFI_FPCI_BAR2);
+		size = resource_size(res);
 
-	/* Bar 3: non prefetchable memory BAR */
-	fpci_bar = (((pcie->mem.start >> 12) & 0x0fffffff) << 4) | 0x1;
-	size = resource_size(&pcie->mem);
-	axi_address = pcie->mem.start;
-	afi_writel(pcie, axi_address, AFI_AXI_BAR3_START);
-	afi_writel(pcie, size >> 12, AFI_AXI_BAR3_SZ);
-	afi_writel(pcie, fpci_bar, AFI_FPCI_BAR3);
+		switch (resource_type(res)) {
+		case IORESOURCE_IO:
+			/* Bar 1: downstream IO bar */
+			fpci_bar = 0xfdfc0000;
+			axi_address = pci_pio_to_address(res->start);
+			afi_writel(pcie, axi_address, AFI_AXI_BAR1_START);
+			afi_writel(pcie, size >> 12, AFI_AXI_BAR1_SZ);
+			afi_writel(pcie, fpci_bar, AFI_FPCI_BAR1);
+			break;
+		case IORESOURCE_MEM:
+			fpci_bar = (((res->start >> 12) & 0x0fffffff) << 4) | 0x1;
+			axi_address = res->start;
+
+			if (res->flags & IORESOURCE_PREFETCH) {
+				/* Bar 2: prefetchable memory BAR */
+				afi_writel(pcie, axi_address, AFI_AXI_BAR2_START);
+				afi_writel(pcie, size >> 12, AFI_AXI_BAR2_SZ);
+				afi_writel(pcie, fpci_bar, AFI_FPCI_BAR2);
+
+			} else {
+				/* Bar 3: non prefetchable memory BAR */
+				afi_writel(pcie, axi_address, AFI_AXI_BAR3_START);
+				afi_writel(pcie, size >> 12, AFI_AXI_BAR3_SZ);
+				afi_writel(pcie, fpci_bar, AFI_FPCI_BAR3);
+			}
+			break;
+		}
+	}
 
 	/* NULL out the remaining BARs as they are not used */
 	afi_writel(pcie, 0, AFI_AXI_BAR4_START);
@@ -2157,76 +2128,10 @@ static int tegra_pcie_parse_dt(struct tegra_pcie *pcie)
 	struct device *dev = pcie->dev;
 	struct device_node *np = dev->of_node, *port;
 	const struct tegra_pcie_soc *soc = pcie->soc;
-	struct of_pci_range_parser parser;
-	struct of_pci_range range;
 	u32 lanes = 0, mask = 0;
 	unsigned int lane = 0;
-	struct resource res;
 	int err;
 
-	if (of_pci_range_parser_init(&parser, np)) {
-		dev_err(dev, "missing \"ranges\" property\n");
-		return -EINVAL;
-	}
-
-	for_each_of_pci_range(&parser, &range) {
-		err = of_pci_range_to_resource(&range, np, &res);
-		if (err < 0)
-			return err;
-
-		switch (res.flags & IORESOURCE_TYPE_BITS) {
-		case IORESOURCE_IO:
-			/* Track the bus -> CPU I/O mapping offset. */
-			pcie->offset.io = res.start - range.pci_addr;
-
-			memcpy(&pcie->pio, &res, sizeof(res));
-			pcie->pio.name = np->full_name;
-
-			/*
-			 * The Tegra PCIe host bridge uses this to program the
-			 * mapping of the I/O space to the physical address,
-			 * so we override the .start and .end fields here that
-			 * of_pci_range_to_resource() converted to I/O space.
-			 * We also set the IORESOURCE_MEM type to clarify that
-			 * the resource is in the physical memory space.
-			 */
-			pcie->io.start = range.cpu_addr;
-			pcie->io.end = range.cpu_addr + range.size - 1;
-			pcie->io.flags = IORESOURCE_MEM;
-			pcie->io.name = "I/O";
-
-			memcpy(&res, &pcie->io, sizeof(res));
-			break;
-
-		case IORESOURCE_MEM:
-			/*
-			 * Track the bus -> CPU memory mapping offset. This
-			 * assumes that the prefetchable and non-prefetchable
-			 * regions will be the last of type IORESOURCE_MEM in
-			 * the ranges property.
-			 * */
-			pcie->offset.mem = res.start - range.pci_addr;
-
-			if (res.flags & IORESOURCE_PREFETCH) {
-				memcpy(&pcie->prefetch, &res, sizeof(res));
-				pcie->prefetch.name = "prefetchable";
-			} else {
-				memcpy(&pcie->mem, &res, sizeof(res));
-				pcie->mem.name = "non-prefetchable";
-			}
-			break;
-		}
-	}
-
-	err = of_pci_parse_bus_range(np, &pcie->busn);
-	if (err < 0) {
-		dev_err(dev, "failed to parse ranges property: %d\n", err);
-		pcie->busn.name = np->name;
-		pcie->busn.start = 0;
-		pcie->busn.end = 0xff;
-		pcie->busn.flags = IORESOURCE_BUS;
-	}
-
 	/* parse root ports */
 	for_each_child_of_node(np, port) {
 		struct tegra_pcie_port *rp;
@@ -2766,6 +2671,7 @@ static int tegra_pcie_probe(struct platform_device *pdev)
 	struct pci_host_bridge *host;
 	struct tegra_pcie *pcie;
 	struct pci_bus *child;
+	struct resource *bus;
 	int err;
 
 	host = devm_pci_alloc_host_bridge(dev, sizeof(*pcie));
@@ -2780,6 +2686,12 @@ static int tegra_pcie_probe(struct platform_device *pdev)
 	INIT_LIST_HEAD(&pcie->ports);
 	pcie->dev = dev;
 
+	err = pci_parse_request_of_pci_ranges(dev, &host->windows, NULL, &bus);
+	if (err) {
+		dev_err(dev, "Getting bridge resources failed\n");
+		return err;
+	}
+
 	err = tegra_pcie_parse_dt(pcie);
 	if (err < 0)
 		return err;
@@ -2803,11 +2715,7 @@ static int tegra_pcie_probe(struct platform_device *pdev)
 		goto teardown_msi;
 	}
 
-	err = tegra_pcie_request_resources(pcie);
-	if (err)
-		goto pm_runtime_put;
-
-	host->busnr = pcie->busn.start;
+	host->busnr = bus->start;
 	host->dev.parent = &pdev->dev;
 	host->ops = &tegra_pcie_ops;
 	host->map_irq = tegra_pcie_map_irq;
@@ -2816,7 +2724,7 @@ static int tegra_pcie_probe(struct platform_device *pdev)
 	err = pci_scan_root_bus_bridge(host);
 	if (err < 0) {
 		dev_err(dev, "failed to register host: %d\n", err);
-		goto free_resources;
+		goto pm_runtime_put;
 	}
 
 	pci_bus_size_bridges(host->bus);
@@ -2835,8 +2743,6 @@ static int tegra_pcie_probe(struct platform_device *pdev)
 
 	return 0;
 
-free_resources:
-	tegra_pcie_free_resources(pcie);
 pm_runtime_put:
 	pm_runtime_put_sync(pcie->dev);
 	pm_runtime_disable(pcie->dev);
@@ -2858,7 +2764,6 @@ static int tegra_pcie_remove(struct platform_device *pdev)
 
 	pci_stop_root_bus(host->bus);
 	pci_remove_root_bus(host->bus);
-	tegra_pcie_free_resources(pcie);
 	pm_runtime_put_sync(pcie->dev);
 	pm_runtime_disable(pcie->dev);
 
diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index 3a10e67..6d79d14 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -824,8 +824,8 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie)
 	cls = FIELD_GET(PCI_EXP_LNKSTA_CLS, lnksta);
 	nlw = FIELD_GET(PCI_EXP_LNKSTA_NLW, lnksta);
 	dev_info(dev, "link up, %s x%u %s\n",
-		 PCIE_SPEED2STR(cls + PCI_SPEED_133MHz_PCIX_533),
-		 nlw, ssc_good ? "(SSC)" : "(!SSC)");
+		 pci_speed_string(pcie_link_speed[cls]), nlw,
+		 ssc_good ? "(SSC)" : "(!SSC)");
 
 	/* PCIe->SCB endian mode for BAR */
 	tmp = readl(base + PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1);
diff --git a/drivers/pci/controller/pcie-mobiveil.c b/drivers/pci/controller/pcie-mobiveil.c
deleted file mode 100644
index 3a696ca..0000000
--- a/drivers/pci/controller/pcie-mobiveil.c
+++ /dev/null
@@ -1,958 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * PCIe host controller driver for Mobiveil PCIe Host controller
- *
- * Copyright (c) 2018 Mobiveil Inc.
- * Author: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
- */
-
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/irqchip/chained_irq.h>
-#include <linux/irqdomain.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/msi.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/of_pci.h>
-#include <linux/pci.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-#include "../pci.h"
-
-/* register offsets and bit positions */
-
-/*
- * translation tables are grouped into windows, each window registers are
- * grouped into blocks of 4 or 16 registers each
- */
-#define PAB_REG_BLOCK_SIZE		16
-#define PAB_EXT_REG_BLOCK_SIZE		4
-
-#define PAB_REG_ADDR(offset, win)	\
-	(offset + (win * PAB_REG_BLOCK_SIZE))
-#define PAB_EXT_REG_ADDR(offset, win)	\
-	(offset + (win * PAB_EXT_REG_BLOCK_SIZE))
-
-#define LTSSM_STATUS			0x0404
-#define  LTSSM_STATUS_L0_MASK		0x3f
-#define  LTSSM_STATUS_L0		0x2d
-
-#define PAB_CTRL			0x0808
-#define  AMBA_PIO_ENABLE_SHIFT		0
-#define  PEX_PIO_ENABLE_SHIFT		1
-#define  PAGE_SEL_SHIFT			13
-#define  PAGE_SEL_MASK			0x3f
-#define  PAGE_LO_MASK			0x3ff
-#define  PAGE_SEL_OFFSET_SHIFT		10
-
-#define PAB_AXI_PIO_CTRL		0x0840
-#define  APIO_EN_MASK			0xf
-
-#define PAB_PEX_PIO_CTRL		0x08c0
-#define  PIO_ENABLE_SHIFT		0
-
-#define PAB_INTP_AMBA_MISC_ENB		0x0b0c
-#define PAB_INTP_AMBA_MISC_STAT		0x0b1c
-#define  PAB_INTP_INTX_MASK		0x01e0
-#define  PAB_INTP_MSI_MASK		0x8
-
-#define PAB_AXI_AMAP_CTRL(win)		PAB_REG_ADDR(0x0ba0, win)
-#define  WIN_ENABLE_SHIFT		0
-#define  WIN_TYPE_SHIFT			1
-#define  WIN_TYPE_MASK			0x3
-#define  WIN_SIZE_MASK			0xfffffc00
-
-#define PAB_EXT_AXI_AMAP_SIZE(win)	PAB_EXT_REG_ADDR(0xbaf0, win)
-
-#define PAB_EXT_AXI_AMAP_AXI_WIN(win)	PAB_EXT_REG_ADDR(0x80a0, win)
-#define PAB_AXI_AMAP_AXI_WIN(win)	PAB_REG_ADDR(0x0ba4, win)
-#define  AXI_WINDOW_ALIGN_MASK		3
-
-#define PAB_AXI_AMAP_PEX_WIN_L(win)	PAB_REG_ADDR(0x0ba8, win)
-#define  PAB_BUS_SHIFT			24
-#define  PAB_DEVICE_SHIFT		19
-#define  PAB_FUNCTION_SHIFT		16
-
-#define PAB_AXI_AMAP_PEX_WIN_H(win)	PAB_REG_ADDR(0x0bac, win)
-#define PAB_INTP_AXI_PIO_CLASS		0x474
-
-#define PAB_PEX_AMAP_CTRL(win)		PAB_REG_ADDR(0x4ba0, win)
-#define  AMAP_CTRL_EN_SHIFT		0
-#define  AMAP_CTRL_TYPE_SHIFT		1
-#define  AMAP_CTRL_TYPE_MASK		3
-
-#define PAB_EXT_PEX_AMAP_SIZEN(win)	PAB_EXT_REG_ADDR(0xbef0, win)
-#define PAB_EXT_PEX_AMAP_AXI_WIN(win)	PAB_EXT_REG_ADDR(0xb4a0, win)
-#define PAB_PEX_AMAP_AXI_WIN(win)	PAB_REG_ADDR(0x4ba4, win)
-#define PAB_PEX_AMAP_PEX_WIN_L(win)	PAB_REG_ADDR(0x4ba8, win)
-#define PAB_PEX_AMAP_PEX_WIN_H(win)	PAB_REG_ADDR(0x4bac, win)
-
-/* starting offset of INTX bits in status register */
-#define PAB_INTX_START			5
-
-/* supported number of MSI interrupts */
-#define PCI_NUM_MSI			16
-
-/* MSI registers */
-#define MSI_BASE_LO_OFFSET		0x04
-#define MSI_BASE_HI_OFFSET		0x08
-#define MSI_SIZE_OFFSET			0x0c
-#define MSI_ENABLE_OFFSET		0x14
-#define MSI_STATUS_OFFSET		0x18
-#define MSI_DATA_OFFSET			0x20
-#define MSI_ADDR_L_OFFSET		0x24
-#define MSI_ADDR_H_OFFSET		0x28
-
-/* outbound and inbound window definitions */
-#define WIN_NUM_0			0
-#define WIN_NUM_1			1
-#define CFG_WINDOW_TYPE			0
-#define IO_WINDOW_TYPE			1
-#define MEM_WINDOW_TYPE			2
-#define IB_WIN_SIZE			((u64)256 * 1024 * 1024 * 1024)
-#define MAX_PIO_WINDOWS			8
-
-/* Parameters for the waiting for link up routine */
-#define LINK_WAIT_MAX_RETRIES		10
-#define LINK_WAIT_MIN			90000
-#define LINK_WAIT_MAX			100000
-
-#define PAGED_ADDR_BNDRY		0xc00
-#define OFFSET_TO_PAGE_ADDR(off)	\
-	((off & PAGE_LO_MASK) | PAGED_ADDR_BNDRY)
-#define OFFSET_TO_PAGE_IDX(off)		\
-	((off >> PAGE_SEL_OFFSET_SHIFT) & PAGE_SEL_MASK)
-
-struct mobiveil_msi {			/* MSI information */
-	struct mutex lock;		/* protect bitmap variable */
-	struct irq_domain *msi_domain;
-	struct irq_domain *dev_domain;
-	phys_addr_t msi_pages_phys;
-	int num_of_vectors;
-	DECLARE_BITMAP(msi_irq_in_use, PCI_NUM_MSI);
-};
-
-struct mobiveil_pcie {
-	struct platform_device *pdev;
-	void __iomem *config_axi_slave_base;	/* endpoint config base */
-	void __iomem *csr_axi_slave_base;	/* root port config base */
-	void __iomem *apb_csr_base;	/* MSI register base */
-	phys_addr_t pcie_reg_base;	/* Physical PCIe Controller Base */
-	struct irq_domain *intx_domain;
-	raw_spinlock_t intx_mask_lock;
-	int irq;
-	int apio_wins;
-	int ppio_wins;
-	int ob_wins_configured;		/* configured outbound windows */
-	int ib_wins_configured;		/* configured inbound windows */
-	struct resource *ob_io_res;
-	char root_bus_nr;
-	struct mobiveil_msi msi;
-};
-
-/*
- * mobiveil_pcie_sel_page - routine to access paged register
- *
- * Registers whose address greater than PAGED_ADDR_BNDRY (0xc00) are paged,
- * for this scheme to work extracted higher 6 bits of the offset will be
- * written to pg_sel field of PAB_CTRL register and rest of the lower 10
- * bits enabled with PAGED_ADDR_BNDRY are used as offset of the register.
- */
-static void mobiveil_pcie_sel_page(struct mobiveil_pcie *pcie, u8 pg_idx)
-{
-	u32 val;
-
-	val = readl(pcie->csr_axi_slave_base + PAB_CTRL);
-	val &= ~(PAGE_SEL_MASK << PAGE_SEL_SHIFT);
-	val |= (pg_idx & PAGE_SEL_MASK) << PAGE_SEL_SHIFT;
-
-	writel(val, pcie->csr_axi_slave_base + PAB_CTRL);
-}
-
-static void *mobiveil_pcie_comp_addr(struct mobiveil_pcie *pcie, u32 off)
-{
-	if (off < PAGED_ADDR_BNDRY) {
-		/* For directly accessed registers, clear the pg_sel field */
-		mobiveil_pcie_sel_page(pcie, 0);
-		return pcie->csr_axi_slave_base + off;
-	}
-
-	mobiveil_pcie_sel_page(pcie, OFFSET_TO_PAGE_IDX(off));
-	return pcie->csr_axi_slave_base + OFFSET_TO_PAGE_ADDR(off);
-}
-
-static int mobiveil_pcie_read(void __iomem *addr, int size, u32 *val)
-{
-	if ((uintptr_t)addr & (size - 1)) {
-		*val = 0;
-		return PCIBIOS_BAD_REGISTER_NUMBER;
-	}
-
-	switch (size) {
-	case 4:
-		*val = readl(addr);
-		break;
-	case 2:
-		*val = readw(addr);
-		break;
-	case 1:
-		*val = readb(addr);
-		break;
-	default:
-		*val = 0;
-		return PCIBIOS_BAD_REGISTER_NUMBER;
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int mobiveil_pcie_write(void __iomem *addr, int size, u32 val)
-{
-	if ((uintptr_t)addr & (size - 1))
-		return PCIBIOS_BAD_REGISTER_NUMBER;
-
-	switch (size) {
-	case 4:
-		writel(val, addr);
-		break;
-	case 2:
-		writew(val, addr);
-		break;
-	case 1:
-		writeb(val, addr);
-		break;
-	default:
-		return PCIBIOS_BAD_REGISTER_NUMBER;
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static u32 mobiveil_csr_read(struct mobiveil_pcie *pcie, u32 off, size_t size)
-{
-	void *addr;
-	u32 val;
-	int ret;
-
-	addr = mobiveil_pcie_comp_addr(pcie, off);
-
-	ret = mobiveil_pcie_read(addr, size, &val);
-	if (ret)
-		dev_err(&pcie->pdev->dev, "read CSR address failed\n");
-
-	return val;
-}
-
-static void mobiveil_csr_write(struct mobiveil_pcie *pcie, u32 val, u32 off,
-			       size_t size)
-{
-	void *addr;
-	int ret;
-
-	addr = mobiveil_pcie_comp_addr(pcie, off);
-
-	ret = mobiveil_pcie_write(addr, size, val);
-	if (ret)
-		dev_err(&pcie->pdev->dev, "write CSR address failed\n");
-}
-
-static u32 mobiveil_csr_readl(struct mobiveil_pcie *pcie, u32 off)
-{
-	return mobiveil_csr_read(pcie, off, 0x4);
-}
-
-static void mobiveil_csr_writel(struct mobiveil_pcie *pcie, u32 val, u32 off)
-{
-	mobiveil_csr_write(pcie, val, off, 0x4);
-}
-
-static bool mobiveil_pcie_link_up(struct mobiveil_pcie *pcie)
-{
-	return (mobiveil_csr_readl(pcie, LTSSM_STATUS) &
-		LTSSM_STATUS_L0_MASK) == LTSSM_STATUS_L0;
-}
-
-static bool mobiveil_pcie_valid_device(struct pci_bus *bus, unsigned int devfn)
-{
-	struct mobiveil_pcie *pcie = bus->sysdata;
-
-	/* Only one device down on each root port */
-	if ((bus->number == pcie->root_bus_nr) && (devfn > 0))
-		return false;
-
-	/*
-	 * Do not read more than one device on the bus directly
-	 * attached to RC
-	 */
-	if ((bus->primary == pcie->root_bus_nr) && (PCI_SLOT(devfn) > 0))
-		return false;
-
-	return true;
-}
-
-/*
- * mobiveil_pcie_map_bus - routine to get the configuration base of either
- * root port or endpoint
- */
-static void __iomem *mobiveil_pcie_map_bus(struct pci_bus *bus,
-					   unsigned int devfn, int where)
-{
-	struct mobiveil_pcie *pcie = bus->sysdata;
-	u32 value;
-
-	if (!mobiveil_pcie_valid_device(bus, devfn))
-		return NULL;
-
-	/* RC config access */
-	if (bus->number == pcie->root_bus_nr)
-		return pcie->csr_axi_slave_base + where;
-
-	/*
-	 * EP config access (in Config/APIO space)
-	 * Program PEX Address base (31..16 bits) with appropriate value
-	 * (BDF) in PAB_AXI_AMAP_PEX_WIN_L0 Register.
-	 * Relies on pci_lock serialization
-	 */
-	value = bus->number << PAB_BUS_SHIFT |
-		PCI_SLOT(devfn) << PAB_DEVICE_SHIFT |
-		PCI_FUNC(devfn) << PAB_FUNCTION_SHIFT;
-
-	mobiveil_csr_writel(pcie, value, PAB_AXI_AMAP_PEX_WIN_L(WIN_NUM_0));
-
-	return pcie->config_axi_slave_base + where;
-}
-
-static struct pci_ops mobiveil_pcie_ops = {
-	.map_bus = mobiveil_pcie_map_bus,
-	.read = pci_generic_config_read,
-	.write = pci_generic_config_write,
-};
-
-static void mobiveil_pcie_isr(struct irq_desc *desc)
-{
-	struct irq_chip *chip = irq_desc_get_chip(desc);
-	struct mobiveil_pcie *pcie = irq_desc_get_handler_data(desc);
-	struct device *dev = &pcie->pdev->dev;
-	struct mobiveil_msi *msi = &pcie->msi;
-	u32 msi_data, msi_addr_lo, msi_addr_hi;
-	u32 intr_status, msi_status;
-	unsigned long shifted_status;
-	u32 bit, virq, val, mask;
-
-	/*
-	 * The core provides a single interrupt for both INTx/MSI messages.
-	 * So we'll read both INTx and MSI status
-	 */
-
-	chained_irq_enter(chip, desc);
-
-	/* read INTx status */
-	val = mobiveil_csr_readl(pcie, PAB_INTP_AMBA_MISC_STAT);
-	mask = mobiveil_csr_readl(pcie, PAB_INTP_AMBA_MISC_ENB);
-	intr_status = val & mask;
-
-	/* Handle INTx */
-	if (intr_status & PAB_INTP_INTX_MASK) {
-		shifted_status = mobiveil_csr_readl(pcie,
-						    PAB_INTP_AMBA_MISC_STAT);
-		shifted_status &= PAB_INTP_INTX_MASK;
-		shifted_status >>= PAB_INTX_START;
-		do {
-			for_each_set_bit(bit, &shifted_status, PCI_NUM_INTX) {
-				virq = irq_find_mapping(pcie->intx_domain,
-							bit + 1);
-				if (virq)
-					generic_handle_irq(virq);
-				else
-					dev_err_ratelimited(dev, "unexpected IRQ, INT%d\n",
-							    bit);
-
-				/* clear interrupt handled */
-				mobiveil_csr_writel(pcie,
-						    1 << (PAB_INTX_START + bit),
-						    PAB_INTP_AMBA_MISC_STAT);
-			}
-
-			shifted_status = mobiveil_csr_readl(pcie,
-							    PAB_INTP_AMBA_MISC_STAT);
-			shifted_status &= PAB_INTP_INTX_MASK;
-			shifted_status >>= PAB_INTX_START;
-		} while (shifted_status != 0);
-	}
-
-	/* read extra MSI status register */
-	msi_status = readl_relaxed(pcie->apb_csr_base + MSI_STATUS_OFFSET);
-
-	/* handle MSI interrupts */
-	while (msi_status & 1) {
-		msi_data = readl_relaxed(pcie->apb_csr_base + MSI_DATA_OFFSET);
-
-		/*
-		 * MSI_STATUS_OFFSET register gets updated to zero
-		 * once we pop not only the MSI data but also address
-		 * from MSI hardware FIFO. So keeping these following
-		 * two dummy reads.
-		 */
-		msi_addr_lo = readl_relaxed(pcie->apb_csr_base +
-					    MSI_ADDR_L_OFFSET);
-		msi_addr_hi = readl_relaxed(pcie->apb_csr_base +
-					    MSI_ADDR_H_OFFSET);
-		dev_dbg(dev, "MSI registers, data: %08x, addr: %08x:%08x\n",
-			msi_data, msi_addr_hi, msi_addr_lo);
-
-		virq = irq_find_mapping(msi->dev_domain, msi_data);
-		if (virq)
-			generic_handle_irq(virq);
-
-		msi_status = readl_relaxed(pcie->apb_csr_base +
-					   MSI_STATUS_OFFSET);
-	}
-
-	/* Clear the interrupt status */
-	mobiveil_csr_writel(pcie, intr_status, PAB_INTP_AMBA_MISC_STAT);
-	chained_irq_exit(chip, desc);
-}
-
-static int mobiveil_pcie_parse_dt(struct mobiveil_pcie *pcie)
-{
-	struct device *dev = &pcie->pdev->dev;
-	struct platform_device *pdev = pcie->pdev;
-	struct device_node *node = dev->of_node;
-	struct resource *res;
-
-	/* map config resource */
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-					   "config_axi_slave");
-	pcie->config_axi_slave_base = devm_pci_remap_cfg_resource(dev, res);
-	if (IS_ERR(pcie->config_axi_slave_base))
-		return PTR_ERR(pcie->config_axi_slave_base);
-	pcie->ob_io_res = res;
-
-	/* map csr resource */
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-					   "csr_axi_slave");
-	pcie->csr_axi_slave_base = devm_pci_remap_cfg_resource(dev, res);
-	if (IS_ERR(pcie->csr_axi_slave_base))
-		return PTR_ERR(pcie->csr_axi_slave_base);
-	pcie->pcie_reg_base = res->start;
-
-	/* map MSI config resource */
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "apb_csr");
-	pcie->apb_csr_base = devm_pci_remap_cfg_resource(dev, res);
-	if (IS_ERR(pcie->apb_csr_base))
-		return PTR_ERR(pcie->apb_csr_base);
-
-	/* read the number of windows requested */
-	if (of_property_read_u32(node, "apio-wins", &pcie->apio_wins))
-		pcie->apio_wins = MAX_PIO_WINDOWS;
-
-	if (of_property_read_u32(node, "ppio-wins", &pcie->ppio_wins))
-		pcie->ppio_wins = MAX_PIO_WINDOWS;
-
-	pcie->irq = platform_get_irq(pdev, 0);
-	if (pcie->irq <= 0) {
-		dev_err(dev, "failed to map IRQ: %d\n", pcie->irq);
-		return -ENODEV;
-	}
-
-	return 0;
-}
-
-static void program_ib_windows(struct mobiveil_pcie *pcie, int win_num,
-			       u64 cpu_addr, u64 pci_addr, u32 type, u64 size)
-{
-	u32 value;
-	u64 size64 = ~(size - 1);
-
-	if (win_num >= pcie->ppio_wins) {
-		dev_err(&pcie->pdev->dev,
-			"ERROR: max inbound windows reached !\n");
-		return;
-	}
-
-	value = mobiveil_csr_readl(pcie, PAB_PEX_AMAP_CTRL(win_num));
-	value &= ~(AMAP_CTRL_TYPE_MASK << AMAP_CTRL_TYPE_SHIFT | WIN_SIZE_MASK);
-	value |= type << AMAP_CTRL_TYPE_SHIFT | 1 << AMAP_CTRL_EN_SHIFT |
-		 (lower_32_bits(size64) & WIN_SIZE_MASK);
-	mobiveil_csr_writel(pcie, value, PAB_PEX_AMAP_CTRL(win_num));
-
-	mobiveil_csr_writel(pcie, upper_32_bits(size64),
-			    PAB_EXT_PEX_AMAP_SIZEN(win_num));
-
-	mobiveil_csr_writel(pcie, lower_32_bits(cpu_addr),
-			    PAB_PEX_AMAP_AXI_WIN(win_num));
-	mobiveil_csr_writel(pcie, upper_32_bits(cpu_addr),
-			    PAB_EXT_PEX_AMAP_AXI_WIN(win_num));
-
-	mobiveil_csr_writel(pcie, lower_32_bits(pci_addr),
-			    PAB_PEX_AMAP_PEX_WIN_L(win_num));
-	mobiveil_csr_writel(pcie, upper_32_bits(pci_addr),
-			    PAB_PEX_AMAP_PEX_WIN_H(win_num));
-
-	pcie->ib_wins_configured++;
-}
-
-/*
- * routine to program the outbound windows
- */
-static void program_ob_windows(struct mobiveil_pcie *pcie, int win_num,
-			       u64 cpu_addr, u64 pci_addr, u32 type, u64 size)
-{
-	u32 value;
-	u64 size64 = ~(size - 1);
-
-	if (win_num >= pcie->apio_wins) {
-		dev_err(&pcie->pdev->dev,
-			"ERROR: max outbound windows reached !\n");
-		return;
-	}
-
-	/*
-	 * program Enable Bit to 1, Type Bit to (00) base 2, AXI Window Size Bit
-	 * to 4 KB in PAB_AXI_AMAP_CTRL register
-	 */
-	value = mobiveil_csr_readl(pcie, PAB_AXI_AMAP_CTRL(win_num));
-	value &= ~(WIN_TYPE_MASK << WIN_TYPE_SHIFT | WIN_SIZE_MASK);
-	value |= 1 << WIN_ENABLE_SHIFT | type << WIN_TYPE_SHIFT |
-		 (lower_32_bits(size64) & WIN_SIZE_MASK);
-	mobiveil_csr_writel(pcie, value, PAB_AXI_AMAP_CTRL(win_num));
-
-	mobiveil_csr_writel(pcie, upper_32_bits(size64),
-			    PAB_EXT_AXI_AMAP_SIZE(win_num));
-
-	/*
-	 * program AXI window base with appropriate value in
-	 * PAB_AXI_AMAP_AXI_WIN0 register
-	 */
-	mobiveil_csr_writel(pcie,
-			    lower_32_bits(cpu_addr) & (~AXI_WINDOW_ALIGN_MASK),
-			    PAB_AXI_AMAP_AXI_WIN(win_num));
-	mobiveil_csr_writel(pcie, upper_32_bits(cpu_addr),
-			    PAB_EXT_AXI_AMAP_AXI_WIN(win_num));
-
-	mobiveil_csr_writel(pcie, lower_32_bits(pci_addr),
-			    PAB_AXI_AMAP_PEX_WIN_L(win_num));
-	mobiveil_csr_writel(pcie, upper_32_bits(pci_addr),
-			    PAB_AXI_AMAP_PEX_WIN_H(win_num));
-
-	pcie->ob_wins_configured++;
-}
-
-static int mobiveil_bringup_link(struct mobiveil_pcie *pcie)
-{
-	int retries;
-
-	/* check if the link is up or not */
-	for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
-		if (mobiveil_pcie_link_up(pcie))
-			return 0;
-
-		usleep_range(LINK_WAIT_MIN, LINK_WAIT_MAX);
-	}
-
-	dev_err(&pcie->pdev->dev, "link never came up\n");
-
-	return -ETIMEDOUT;
-}
-
-static void mobiveil_pcie_enable_msi(struct mobiveil_pcie *pcie)
-{
-	phys_addr_t msg_addr = pcie->pcie_reg_base;
-	struct mobiveil_msi *msi = &pcie->msi;
-
-	pcie->msi.num_of_vectors = PCI_NUM_MSI;
-	msi->msi_pages_phys = (phys_addr_t)msg_addr;
-
-	writel_relaxed(lower_32_bits(msg_addr),
-		       pcie->apb_csr_base + MSI_BASE_LO_OFFSET);
-	writel_relaxed(upper_32_bits(msg_addr),
-		       pcie->apb_csr_base + MSI_BASE_HI_OFFSET);
-	writel_relaxed(4096, pcie->apb_csr_base + MSI_SIZE_OFFSET);
-	writel_relaxed(1, pcie->apb_csr_base + MSI_ENABLE_OFFSET);
-}
-
-static int mobiveil_host_init(struct mobiveil_pcie *pcie)
-{
-	struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie);
-	u32 value, pab_ctrl, type;
-	struct resource_entry *win;
-
-	/* setup bus numbers */
-	value = mobiveil_csr_readl(pcie, PCI_PRIMARY_BUS);
-	value &= 0xff000000;
-	value |= 0x00ff0100;
-	mobiveil_csr_writel(pcie, value, PCI_PRIMARY_BUS);
-
-	/*
-	 * program Bus Master Enable Bit in Command Register in PAB Config
-	 * Space
-	 */
-	value = mobiveil_csr_readl(pcie, PCI_COMMAND);
-	value |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
-	mobiveil_csr_writel(pcie, value, PCI_COMMAND);
-
-	/*
-	 * program PIO Enable Bit to 1 (and PEX PIO Enable to 1) in PAB_CTRL
-	 * register
-	 */
-	pab_ctrl = mobiveil_csr_readl(pcie, PAB_CTRL);
-	pab_ctrl |= (1 << AMBA_PIO_ENABLE_SHIFT) | (1 << PEX_PIO_ENABLE_SHIFT);
-	mobiveil_csr_writel(pcie, pab_ctrl, PAB_CTRL);
-
-	mobiveil_csr_writel(pcie, (PAB_INTP_INTX_MASK | PAB_INTP_MSI_MASK),
-			    PAB_INTP_AMBA_MISC_ENB);
-
-	/*
-	 * program PIO Enable Bit to 1 and Config Window Enable Bit to 1 in
-	 * PAB_AXI_PIO_CTRL Register
-	 */
-	value = mobiveil_csr_readl(pcie, PAB_AXI_PIO_CTRL);
-	value |= APIO_EN_MASK;
-	mobiveil_csr_writel(pcie, value, PAB_AXI_PIO_CTRL);
-
-	/* Enable PCIe PIO master */
-	value = mobiveil_csr_readl(pcie, PAB_PEX_PIO_CTRL);
-	value |= 1 << PIO_ENABLE_SHIFT;
-	mobiveil_csr_writel(pcie, value, PAB_PEX_PIO_CTRL);
-
-	/*
-	 * we'll program one outbound window for config reads and
-	 * another default inbound window for all the upstream traffic
-	 * rest of the outbound windows will be configured according to
-	 * the "ranges" field defined in device tree
-	 */
-
-	/* config outbound translation window */
-	program_ob_windows(pcie, WIN_NUM_0, pcie->ob_io_res->start, 0,
-			   CFG_WINDOW_TYPE, resource_size(pcie->ob_io_res));
-
-	/* memory inbound translation window */
-	program_ib_windows(pcie, WIN_NUM_0, 0, 0, MEM_WINDOW_TYPE, IB_WIN_SIZE);
-
-	/* Get the I/O and memory ranges from DT */
-	resource_list_for_each_entry(win, &bridge->windows) {
-		if (resource_type(win->res) == IORESOURCE_MEM)
-			type = MEM_WINDOW_TYPE;
-		else if (resource_type(win->res) == IORESOURCE_IO)
-			type = IO_WINDOW_TYPE;
-		else
-			continue;
-
-		/* configure outbound translation window */
-		program_ob_windows(pcie, pcie->ob_wins_configured,
-				   win->res->start,
-				   win->res->start - win->offset,
-				   type, resource_size(win->res));
-	}
-
-	/* fixup for PCIe class register */
-	value = mobiveil_csr_readl(pcie, PAB_INTP_AXI_PIO_CLASS);
-	value &= 0xff;
-	value |= (PCI_CLASS_BRIDGE_PCI << 16);
-	mobiveil_csr_writel(pcie, value, PAB_INTP_AXI_PIO_CLASS);
-
-	/* setup MSI hardware registers */
-	mobiveil_pcie_enable_msi(pcie);
-
-	return 0;
-}
-
-static void mobiveil_mask_intx_irq(struct irq_data *data)
-{
-	struct irq_desc *desc = irq_to_desc(data->irq);
-	struct mobiveil_pcie *pcie;
-	unsigned long flags;
-	u32 mask, shifted_val;
-
-	pcie = irq_desc_get_chip_data(desc);
-	mask = 1 << ((data->hwirq + PAB_INTX_START) - 1);
-	raw_spin_lock_irqsave(&pcie->intx_mask_lock, flags);
-	shifted_val = mobiveil_csr_readl(pcie, PAB_INTP_AMBA_MISC_ENB);
-	shifted_val &= ~mask;
-	mobiveil_csr_writel(pcie, shifted_val, PAB_INTP_AMBA_MISC_ENB);
-	raw_spin_unlock_irqrestore(&pcie->intx_mask_lock, flags);
-}
-
-static void mobiveil_unmask_intx_irq(struct irq_data *data)
-{
-	struct irq_desc *desc = irq_to_desc(data->irq);
-	struct mobiveil_pcie *pcie;
-	unsigned long flags;
-	u32 shifted_val, mask;
-
-	pcie = irq_desc_get_chip_data(desc);
-	mask = 1 << ((data->hwirq + PAB_INTX_START) - 1);
-	raw_spin_lock_irqsave(&pcie->intx_mask_lock, flags);
-	shifted_val = mobiveil_csr_readl(pcie, PAB_INTP_AMBA_MISC_ENB);
-	shifted_val |= mask;
-	mobiveil_csr_writel(pcie, shifted_val, PAB_INTP_AMBA_MISC_ENB);
-	raw_spin_unlock_irqrestore(&pcie->intx_mask_lock, flags);
-}
-
-static struct irq_chip intx_irq_chip = {
-	.name = "mobiveil_pcie:intx",
-	.irq_enable = mobiveil_unmask_intx_irq,
-	.irq_disable = mobiveil_mask_intx_irq,
-	.irq_mask = mobiveil_mask_intx_irq,
-	.irq_unmask = mobiveil_unmask_intx_irq,
-};
-
-/* routine to setup the INTx related data */
-static int mobiveil_pcie_intx_map(struct irq_domain *domain, unsigned int irq,
-				  irq_hw_number_t hwirq)
-{
-	irq_set_chip_and_handler(irq, &intx_irq_chip, handle_level_irq);
-	irq_set_chip_data(irq, domain->host_data);
-
-	return 0;
-}
-
-/* INTx domain operations structure */
-static const struct irq_domain_ops intx_domain_ops = {
-	.map = mobiveil_pcie_intx_map,
-};
-
-static struct irq_chip mobiveil_msi_irq_chip = {
-	.name = "Mobiveil PCIe MSI",
-	.irq_mask = pci_msi_mask_irq,
-	.irq_unmask = pci_msi_unmask_irq,
-};
-
-static struct msi_domain_info mobiveil_msi_domain_info = {
-	.flags	= (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
-		   MSI_FLAG_PCI_MSIX),
-	.chip	= &mobiveil_msi_irq_chip,
-};
-
-static void mobiveil_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
-{
-	struct mobiveil_pcie *pcie = irq_data_get_irq_chip_data(data);
-	phys_addr_t addr = pcie->pcie_reg_base + (data->hwirq * sizeof(int));
-
-	msg->address_lo = lower_32_bits(addr);
-	msg->address_hi = upper_32_bits(addr);
-	msg->data = data->hwirq;
-
-	dev_dbg(&pcie->pdev->dev, "msi#%d address_hi %#x address_lo %#x\n",
-		(int)data->hwirq, msg->address_hi, msg->address_lo);
-}
-
-static int mobiveil_msi_set_affinity(struct irq_data *irq_data,
-				     const struct cpumask *mask, bool force)
-{
-	return -EINVAL;
-}
-
-static struct irq_chip mobiveil_msi_bottom_irq_chip = {
-	.name			= "Mobiveil MSI",
-	.irq_compose_msi_msg	= mobiveil_compose_msi_msg,
-	.irq_set_affinity	= mobiveil_msi_set_affinity,
-};
-
-static int mobiveil_irq_msi_domain_alloc(struct irq_domain *domain,
-					 unsigned int virq,
-					 unsigned int nr_irqs, void *args)
-{
-	struct mobiveil_pcie *pcie = domain->host_data;
-	struct mobiveil_msi *msi = &pcie->msi;
-	unsigned long bit;
-
-	WARN_ON(nr_irqs != 1);
-	mutex_lock(&msi->lock);
-
-	bit = find_first_zero_bit(msi->msi_irq_in_use, msi->num_of_vectors);
-	if (bit >= msi->num_of_vectors) {
-		mutex_unlock(&msi->lock);
-		return -ENOSPC;
-	}
-
-	set_bit(bit, msi->msi_irq_in_use);
-
-	mutex_unlock(&msi->lock);
-
-	irq_domain_set_info(domain, virq, bit, &mobiveil_msi_bottom_irq_chip,
-			    domain->host_data, handle_level_irq, NULL, NULL);
-	return 0;
-}
-
-static void mobiveil_irq_msi_domain_free(struct irq_domain *domain,
-					 unsigned int virq,
-					 unsigned int nr_irqs)
-{
-	struct irq_data *d = irq_domain_get_irq_data(domain, virq);
-	struct mobiveil_pcie *pcie = irq_data_get_irq_chip_data(d);
-	struct mobiveil_msi *msi = &pcie->msi;
-
-	mutex_lock(&msi->lock);
-
-	if (!test_bit(d->hwirq, msi->msi_irq_in_use))
-		dev_err(&pcie->pdev->dev, "trying to free unused MSI#%lu\n",
-			d->hwirq);
-	else
-		__clear_bit(d->hwirq, msi->msi_irq_in_use);
-
-	mutex_unlock(&msi->lock);
-}
-static const struct irq_domain_ops msi_domain_ops = {
-	.alloc	= mobiveil_irq_msi_domain_alloc,
-	.free	= mobiveil_irq_msi_domain_free,
-};
-
-static int mobiveil_allocate_msi_domains(struct mobiveil_pcie *pcie)
-{
-	struct device *dev = &pcie->pdev->dev;
-	struct fwnode_handle *fwnode = of_node_to_fwnode(dev->of_node);
-	struct mobiveil_msi *msi = &pcie->msi;
-
-	mutex_init(&pcie->msi.lock);
-	msi->dev_domain = irq_domain_add_linear(NULL, msi->num_of_vectors,
-						&msi_domain_ops, pcie);
-	if (!msi->dev_domain) {
-		dev_err(dev, "failed to create IRQ domain\n");
-		return -ENOMEM;
-	}
-
-	msi->msi_domain = pci_msi_create_irq_domain(fwnode,
-						    &mobiveil_msi_domain_info,
-						    msi->dev_domain);
-	if (!msi->msi_domain) {
-		dev_err(dev, "failed to create MSI domain\n");
-		irq_domain_remove(msi->dev_domain);
-		return -ENOMEM;
-	}
-
-	return 0;
-}
-
-static int mobiveil_pcie_init_irq_domain(struct mobiveil_pcie *pcie)
-{
-	struct device *dev = &pcie->pdev->dev;
-	struct device_node *node = dev->of_node;
-	int ret;
-
-	/* setup INTx */
-	pcie->intx_domain = irq_domain_add_linear(node, PCI_NUM_INTX,
-						  &intx_domain_ops, pcie);
-
-	if (!pcie->intx_domain) {
-		dev_err(dev, "Failed to get a INTx IRQ domain\n");
-		return -ENOMEM;
-	}
-
-	raw_spin_lock_init(&pcie->intx_mask_lock);
-
-	/* setup MSI */
-	ret = mobiveil_allocate_msi_domains(pcie);
-	if (ret)
-		return ret;
-
-	return 0;
-}
-
-static int mobiveil_pcie_probe(struct platform_device *pdev)
-{
-	struct mobiveil_pcie *pcie;
-	struct pci_bus *bus;
-	struct pci_bus *child;
-	struct pci_host_bridge *bridge;
-	struct device *dev = &pdev->dev;
-	int ret;
-
-	/* allocate the PCIe port */
-	bridge = devm_pci_alloc_host_bridge(dev, sizeof(*pcie));
-	if (!bridge)
-		return -ENOMEM;
-
-	pcie = pci_host_bridge_priv(bridge);
-
-	pcie->pdev = pdev;
-
-	ret = mobiveil_pcie_parse_dt(pcie);
-	if (ret) {
-		dev_err(dev, "Parsing DT failed, ret: %x\n", ret);
-		return ret;
-	}
-
-	/* parse the host bridge base addresses from the device tree file */
-	ret = pci_parse_request_of_pci_ranges(dev, &bridge->windows,
-					      &bridge->dma_ranges, NULL);
-	if (ret) {
-		dev_err(dev, "Getting bridge resources failed\n");
-		return ret;
-	}
-
-	/*
-	 * configure all inbound and outbound windows and prepare the RC for
-	 * config access
-	 */
-	ret = mobiveil_host_init(pcie);
-	if (ret) {
-		dev_err(dev, "Failed to initialize host\n");
-		return ret;
-	}
-
-	/* initialize the IRQ domains */
-	ret = mobiveil_pcie_init_irq_domain(pcie);
-	if (ret) {
-		dev_err(dev, "Failed creating IRQ Domain\n");
-		return ret;
-	}
-
-	irq_set_chained_handler_and_data(pcie->irq, mobiveil_pcie_isr, pcie);
-
-	/* Initialize bridge */
-	bridge->dev.parent = dev;
-	bridge->sysdata = pcie;
-	bridge->busnr = pcie->root_bus_nr;
-	bridge->ops = &mobiveil_pcie_ops;
-	bridge->map_irq = of_irq_parse_and_map_pci;
-	bridge->swizzle_irq = pci_common_swizzle;
-
-	ret = mobiveil_bringup_link(pcie);
-	if (ret) {
-		dev_info(dev, "link bring-up failed\n");
-		return ret;
-	}
-
-	/* setup the kernel resources for the newly added PCIe root bus */
-	ret = pci_scan_root_bus_bridge(bridge);
-	if (ret)
-		return ret;
-
-	bus = bridge->bus;
-
-	pci_assign_unassigned_bus_resources(bus);
-	list_for_each_entry(child, &bus->children, node)
-		pcie_bus_configure_settings(child);
-	pci_bus_add_devices(bus);
-
-	return 0;
-}
-
-static const struct of_device_id mobiveil_pcie_of_match[] = {
-	{.compatible = "mbvl,gpex40-pcie",},
-	{},
-};
-
-MODULE_DEVICE_TABLE(of, mobiveil_pcie_of_match);
-
-static struct platform_driver mobiveil_pcie_driver = {
-	.probe = mobiveil_pcie_probe,
-	.driver = {
-		.name = "mobiveil-pcie",
-		.of_match_table = mobiveil_pcie_of_match,
-		.suppress_bind_attrs = true,
-	},
-};
-
-builtin_platform_driver(mobiveil_pcie_driver);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("Mobiveil PCIe host controller driver");
-MODULE_AUTHOR("Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>");
diff --git a/drivers/pci/endpoint/functions/pci-epf-test.c b/drivers/pci/endpoint/functions/pci-epf-test.c
index 5d74f81..60330f3e 100644
--- a/drivers/pci/endpoint/functions/pci-epf-test.c
+++ b/drivers/pci/endpoint/functions/pci-epf-test.c
@@ -8,6 +8,7 @@
 
 #include <linux/crc32.h>
 #include <linux/delay.h>
+#include <linux/dmaengine.h>
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/slab.h>
@@ -39,6 +40,8 @@
 #define STATUS_SRC_ADDR_INVALID		BIT(7)
 #define STATUS_DST_ADDR_INVALID		BIT(8)
 
+#define FLAG_USE_DMA			BIT(0)
+
 #define TIMER_RESOLUTION		1
 
 static struct workqueue_struct *kpcitest_workqueue;
@@ -47,7 +50,11 @@ struct pci_epf_test {
 	void			*reg[PCI_STD_NUM_BARS];
 	struct pci_epf		*epf;
 	enum pci_barno		test_reg_bar;
+	size_t			msix_table_offset;
 	struct delayed_work	cmd_handler;
+	struct dma_chan		*dma_chan;
+	struct completion	transfer_complete;
+	bool			dma_supported;
 	const struct pci_epc_features *epc_features;
 };
 
@@ -61,6 +68,7 @@ struct pci_epf_test_reg {
 	u32	checksum;
 	u32	irq_type;
 	u32	irq_number;
+	u32	flags;
 } __packed;
 
 static struct pci_epf_header test_header = {
@@ -72,13 +80,156 @@ static struct pci_epf_header test_header = {
 
 static size_t bar_size[] = { 512, 512, 1024, 16384, 131072, 1048576 };
 
+static void pci_epf_test_dma_callback(void *param)
+{
+	struct pci_epf_test *epf_test = param;
+
+	complete(&epf_test->transfer_complete);
+}
+
+/**
+ * pci_epf_test_data_transfer() - Function that uses dmaengine API to transfer
+ *				  data between PCIe EP and remote PCIe RC
+ * @epf_test: the EPF test device that performs the data transfer operation
+ * @dma_dst: The destination address of the data transfer. It can be a physical
+ *	     address given by pci_epc_mem_alloc_addr or DMA mapping APIs.
+ * @dma_src: The source address of the data transfer. It can be a physical
+ *	     address given by pci_epc_mem_alloc_addr or DMA mapping APIs.
+ * @len: The size of the data transfer
+ *
+ * Function that uses dmaengine API to transfer data between PCIe EP and remote
+ * PCIe RC. The source and destination address can be a physical address given
+ * by pci_epc_mem_alloc_addr or the one obtained using DMA mapping APIs.
+ *
+ * The function returns '0' on success and negative value on failure.
+ */
+static int pci_epf_test_data_transfer(struct pci_epf_test *epf_test,
+				      dma_addr_t dma_dst, dma_addr_t dma_src,
+				      size_t len)
+{
+	enum dma_ctrl_flags flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT;
+	struct dma_chan *chan = epf_test->dma_chan;
+	struct pci_epf *epf = epf_test->epf;
+	struct dma_async_tx_descriptor *tx;
+	struct device *dev = &epf->dev;
+	dma_cookie_t cookie;
+	int ret;
+
+	if (IS_ERR_OR_NULL(chan)) {
+		dev_err(dev, "Invalid DMA memcpy channel\n");
+		return -EINVAL;
+	}
+
+	tx = dmaengine_prep_dma_memcpy(chan, dma_dst, dma_src, len, flags);
+	if (!tx) {
+		dev_err(dev, "Failed to prepare DMA memcpy\n");
+		return -EIO;
+	}
+
+	tx->callback = pci_epf_test_dma_callback;
+	tx->callback_param = epf_test;
+	cookie = tx->tx_submit(tx);
+	reinit_completion(&epf_test->transfer_complete);
+
+	ret = dma_submit_error(cookie);
+	if (ret) {
+		dev_err(dev, "Failed to do DMA tx_submit %d\n", cookie);
+		return -EIO;
+	}
+
+	dma_async_issue_pending(chan);
+	ret = wait_for_completion_interruptible(&epf_test->transfer_complete);
+	if (ret < 0) {
+		dmaengine_terminate_sync(chan);
+		dev_err(dev, "DMA wait_for_completion_timeout\n");
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+/**
+ * pci_epf_test_init_dma_chan() - Function to initialize EPF test DMA channel
+ * @epf_test: the EPF test device that performs data transfer operation
+ *
+ * Function to initialize EPF test DMA channel.
+ */
+static int pci_epf_test_init_dma_chan(struct pci_epf_test *epf_test)
+{
+	struct pci_epf *epf = epf_test->epf;
+	struct device *dev = &epf->dev;
+	struct dma_chan *dma_chan;
+	dma_cap_mask_t mask;
+	int ret;
+
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_MEMCPY, mask);
+
+	dma_chan = dma_request_chan_by_mask(&mask);
+	if (IS_ERR(dma_chan)) {
+		ret = PTR_ERR(dma_chan);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "Failed to get DMA channel\n");
+		return ret;
+	}
+	init_completion(&epf_test->transfer_complete);
+
+	epf_test->dma_chan = dma_chan;
+
+	return 0;
+}
+
+/**
+ * pci_epf_test_clean_dma_chan() - Function to cleanup EPF test DMA channel
+ * @epf: the EPF test device that performs data transfer operation
+ *
+ * Helper to cleanup EPF test DMA channel.
+ */
+static void pci_epf_test_clean_dma_chan(struct pci_epf_test *epf_test)
+{
+	dma_release_channel(epf_test->dma_chan);
+	epf_test->dma_chan = NULL;
+}
+
+static void pci_epf_test_print_rate(const char *ops, u64 size,
+				    struct timespec64 *start,
+				    struct timespec64 *end, bool dma)
+{
+	struct timespec64 ts;
+	u64 rate, ns;
+
+	ts = timespec64_sub(*end, *start);
+
+	/* convert both size (stored in 'rate') and time in terms of 'ns' */
+	ns = timespec64_to_ns(&ts);
+	rate = size * NSEC_PER_SEC;
+
+	/* Divide both size (stored in 'rate') and ns by a common factor */
+	while (ns > UINT_MAX) {
+		rate >>= 1;
+		ns >>= 1;
+	}
+
+	if (!ns)
+		return;
+
+	/* calculate the rate */
+	do_div(rate, (uint32_t)ns);
+
+	pr_info("\n%s => Size: %llu bytes\t DMA: %s\t Time: %llu.%09u seconds\t"
+		"Rate: %llu KB/s\n", ops, size, dma ? "YES" : "NO",
+		(u64)ts.tv_sec, (u32)ts.tv_nsec, rate / 1024);
+}
+
 static int pci_epf_test_copy(struct pci_epf_test *epf_test)
 {
 	int ret;
+	bool use_dma;
 	void __iomem *src_addr;
 	void __iomem *dst_addr;
 	phys_addr_t src_phys_addr;
 	phys_addr_t dst_phys_addr;
+	struct timespec64 start, end;
 	struct pci_epf *epf = epf_test->epf;
 	struct device *dev = &epf->dev;
 	struct pci_epc *epc = epf->epc;
@@ -117,8 +268,26 @@ static int pci_epf_test_copy(struct pci_epf_test *epf_test)
 		goto err_dst_addr;
 	}
 
-	memcpy(dst_addr, src_addr, reg->size);
+	ktime_get_ts64(&start);
+	use_dma = !!(reg->flags & FLAG_USE_DMA);
+	if (use_dma) {
+		if (!epf_test->dma_supported) {
+			dev_err(dev, "Cannot transfer data using DMA\n");
+			ret = -EINVAL;
+			goto err_map_addr;
+		}
 
+		ret = pci_epf_test_data_transfer(epf_test, dst_phys_addr,
+						 src_phys_addr, reg->size);
+		if (ret)
+			dev_err(dev, "Data transfer failed\n");
+	} else {
+		memcpy(dst_addr, src_addr, reg->size);
+	}
+	ktime_get_ts64(&end);
+	pci_epf_test_print_rate("COPY", reg->size, &start, &end, use_dma);
+
+err_map_addr:
 	pci_epc_unmap_addr(epc, epf->func_no, dst_phys_addr);
 
 err_dst_addr:
@@ -140,10 +309,14 @@ static int pci_epf_test_read(struct pci_epf_test *epf_test)
 	void __iomem *src_addr;
 	void *buf;
 	u32 crc32;
+	bool use_dma;
 	phys_addr_t phys_addr;
+	phys_addr_t dst_phys_addr;
+	struct timespec64 start, end;
 	struct pci_epf *epf = epf_test->epf;
 	struct device *dev = &epf->dev;
 	struct pci_epc *epc = epf->epc;
+	struct device *dma_dev = epf->epc->dev.parent;
 	enum pci_barno test_reg_bar = epf_test->test_reg_bar;
 	struct pci_epf_test_reg *reg = epf_test->reg[test_reg_bar];
 
@@ -169,12 +342,44 @@ static int pci_epf_test_read(struct pci_epf_test *epf_test)
 		goto err_map_addr;
 	}
 
-	memcpy_fromio(buf, src_addr, reg->size);
+	use_dma = !!(reg->flags & FLAG_USE_DMA);
+	if (use_dma) {
+		if (!epf_test->dma_supported) {
+			dev_err(dev, "Cannot transfer data using DMA\n");
+			ret = -EINVAL;
+			goto err_dma_map;
+		}
+
+		dst_phys_addr = dma_map_single(dma_dev, buf, reg->size,
+					       DMA_FROM_DEVICE);
+		if (dma_mapping_error(dma_dev, dst_phys_addr)) {
+			dev_err(dev, "Failed to map destination buffer addr\n");
+			ret = -ENOMEM;
+			goto err_dma_map;
+		}
+
+		ktime_get_ts64(&start);
+		ret = pci_epf_test_data_transfer(epf_test, dst_phys_addr,
+						 phys_addr, reg->size);
+		if (ret)
+			dev_err(dev, "Data transfer failed\n");
+		ktime_get_ts64(&end);
+
+		dma_unmap_single(dma_dev, dst_phys_addr, reg->size,
+				 DMA_FROM_DEVICE);
+	} else {
+		ktime_get_ts64(&start);
+		memcpy_fromio(buf, src_addr, reg->size);
+		ktime_get_ts64(&end);
+	}
+
+	pci_epf_test_print_rate("READ", reg->size, &start, &end, use_dma);
 
 	crc32 = crc32_le(~0, buf, reg->size);
 	if (crc32 != reg->checksum)
 		ret = -EIO;
 
+err_dma_map:
 	kfree(buf);
 
 err_map_addr:
@@ -192,10 +397,14 @@ static int pci_epf_test_write(struct pci_epf_test *epf_test)
 	int ret;
 	void __iomem *dst_addr;
 	void *buf;
+	bool use_dma;
 	phys_addr_t phys_addr;
+	phys_addr_t src_phys_addr;
+	struct timespec64 start, end;
 	struct pci_epf *epf = epf_test->epf;
 	struct device *dev = &epf->dev;
 	struct pci_epc *epc = epf->epc;
+	struct device *dma_dev = epf->epc->dev.parent;
 	enum pci_barno test_reg_bar = epf_test->test_reg_bar;
 	struct pci_epf_test_reg *reg = epf_test->reg[test_reg_bar];
 
@@ -224,7 +433,38 @@ static int pci_epf_test_write(struct pci_epf_test *epf_test)
 	get_random_bytes(buf, reg->size);
 	reg->checksum = crc32_le(~0, buf, reg->size);
 
-	memcpy_toio(dst_addr, buf, reg->size);
+	use_dma = !!(reg->flags & FLAG_USE_DMA);
+	if (use_dma) {
+		if (!epf_test->dma_supported) {
+			dev_err(dev, "Cannot transfer data using DMA\n");
+			ret = -EINVAL;
+			goto err_map_addr;
+		}
+
+		src_phys_addr = dma_map_single(dma_dev, buf, reg->size,
+					       DMA_TO_DEVICE);
+		if (dma_mapping_error(dma_dev, src_phys_addr)) {
+			dev_err(dev, "Failed to map source buffer addr\n");
+			ret = -ENOMEM;
+			goto err_dma_map;
+		}
+
+		ktime_get_ts64(&start);
+		ret = pci_epf_test_data_transfer(epf_test, phys_addr,
+						 src_phys_addr, reg->size);
+		if (ret)
+			dev_err(dev, "Data transfer failed\n");
+		ktime_get_ts64(&end);
+
+		dma_unmap_single(dma_dev, src_phys_addr, reg->size,
+				 DMA_TO_DEVICE);
+	} else {
+		ktime_get_ts64(&start);
+		memcpy_toio(dst_addr, buf, reg->size);
+		ktime_get_ts64(&end);
+	}
+
+	pci_epf_test_print_rate("WRITE", reg->size, &start, &end, use_dma);
 
 	/*
 	 * wait 1ms inorder for the write to complete. Without this delay L3
@@ -232,6 +472,7 @@ static int pci_epf_test_write(struct pci_epf_test *epf_test)
 	 */
 	usleep_range(1000, 2000);
 
+err_dma_map:
 	kfree(buf);
 
 err_map_addr:
@@ -360,14 +601,6 @@ static void pci_epf_test_cmd_handler(struct work_struct *work)
 			   msecs_to_jiffies(1));
 }
 
-static void pci_epf_test_linkup(struct pci_epf *epf)
-{
-	struct pci_epf_test *epf_test = epf_get_drvdata(epf);
-
-	queue_delayed_work(kpcitest_workqueue, &epf_test->cmd_handler,
-			   msecs_to_jiffies(1));
-}
-
 static void pci_epf_test_unbind(struct pci_epf *epf)
 {
 	struct pci_epf_test *epf_test = epf_get_drvdata(epf);
@@ -376,6 +609,7 @@ static void pci_epf_test_unbind(struct pci_epf *epf)
 	int bar;
 
 	cancel_delayed_work(&epf_test->cmd_handler);
+	pci_epf_test_clean_dma_chan(epf_test);
 	pci_epc_stop(epc);
 	for (bar = 0; bar < PCI_STD_NUM_BARS; bar++) {
 		epf_bar = &epf->bar[bar];
@@ -424,11 +658,90 @@ static int pci_epf_test_set_bar(struct pci_epf *epf)
 	return 0;
 }
 
+static int pci_epf_test_core_init(struct pci_epf *epf)
+{
+	struct pci_epf_test *epf_test = epf_get_drvdata(epf);
+	struct pci_epf_header *header = epf->header;
+	const struct pci_epc_features *epc_features;
+	struct pci_epc *epc = epf->epc;
+	struct device *dev = &epf->dev;
+	bool msix_capable = false;
+	bool msi_capable = true;
+	int ret;
+
+	epc_features = pci_epc_get_features(epc, epf->func_no);
+	if (epc_features) {
+		msix_capable = epc_features->msix_capable;
+		msi_capable = epc_features->msi_capable;
+	}
+
+	ret = pci_epc_write_header(epc, epf->func_no, header);
+	if (ret) {
+		dev_err(dev, "Configuration header write failed\n");
+		return ret;
+	}
+
+	ret = pci_epf_test_set_bar(epf);
+	if (ret)
+		return ret;
+
+	if (msi_capable) {
+		ret = pci_epc_set_msi(epc, epf->func_no, epf->msi_interrupts);
+		if (ret) {
+			dev_err(dev, "MSI configuration failed\n");
+			return ret;
+		}
+	}
+
+	if (msix_capable) {
+		ret = pci_epc_set_msix(epc, epf->func_no, epf->msix_interrupts,
+				       epf_test->test_reg_bar,
+				       epf_test->msix_table_offset);
+		if (ret) {
+			dev_err(dev, "MSI-X configuration failed\n");
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int pci_epf_test_notifier(struct notifier_block *nb, unsigned long val,
+				 void *data)
+{
+	struct pci_epf *epf = container_of(nb, struct pci_epf, nb);
+	struct pci_epf_test *epf_test = epf_get_drvdata(epf);
+	int ret;
+
+	switch (val) {
+	case CORE_INIT:
+		ret = pci_epf_test_core_init(epf);
+		if (ret)
+			return NOTIFY_BAD;
+		break;
+
+	case LINK_UP:
+		queue_delayed_work(kpcitest_workqueue, &epf_test->cmd_handler,
+				   msecs_to_jiffies(1));
+		break;
+
+	default:
+		dev_err(&epf->dev, "Invalid EPF test notifier event\n");
+		return NOTIFY_BAD;
+	}
+
+	return NOTIFY_OK;
+}
+
 static int pci_epf_test_alloc_space(struct pci_epf *epf)
 {
 	struct pci_epf_test *epf_test = epf_get_drvdata(epf);
 	struct device *dev = &epf->dev;
 	struct pci_epf_bar *epf_bar;
+	size_t msix_table_size = 0;
+	size_t test_reg_bar_size;
+	size_t pba_size = 0;
+	bool msix_capable;
 	void *base;
 	int bar, add;
 	enum pci_barno test_reg_bar = epf_test->test_reg_bar;
@@ -437,13 +750,25 @@ static int pci_epf_test_alloc_space(struct pci_epf *epf)
 
 	epc_features = epf_test->epc_features;
 
-	if (epc_features->bar_fixed_size[test_reg_bar])
-		test_reg_size = bar_size[test_reg_bar];
-	else
-		test_reg_size = sizeof(struct pci_epf_test_reg);
+	test_reg_bar_size = ALIGN(sizeof(struct pci_epf_test_reg), 128);
 
-	base = pci_epf_alloc_space(epf, test_reg_size,
-				   test_reg_bar, epc_features->align);
+	msix_capable = epc_features->msix_capable;
+	if (msix_capable) {
+		msix_table_size = PCI_MSIX_ENTRY_SIZE * epf->msix_interrupts;
+		epf_test->msix_table_offset = test_reg_bar_size;
+		/* Align to QWORD or 8 Bytes */
+		pba_size = ALIGN(DIV_ROUND_UP(epf->msix_interrupts, 8), 8);
+	}
+	test_reg_size = test_reg_bar_size + msix_table_size + pba_size;
+
+	if (epc_features->bar_fixed_size[test_reg_bar]) {
+		if (test_reg_size > bar_size[test_reg_bar])
+			return -ENOMEM;
+		test_reg_size = bar_size[test_reg_bar];
+	}
+
+	base = pci_epf_alloc_space(epf, test_reg_size, test_reg_bar,
+				   epc_features->align);
 	if (!base) {
 		dev_err(dev, "Failed to allocated register space\n");
 		return -ENOMEM;
@@ -492,14 +817,11 @@ static int pci_epf_test_bind(struct pci_epf *epf)
 {
 	int ret;
 	struct pci_epf_test *epf_test = epf_get_drvdata(epf);
-	struct pci_epf_header *header = epf->header;
 	const struct pci_epc_features *epc_features;
 	enum pci_barno test_reg_bar = BAR_0;
 	struct pci_epc *epc = epf->epc;
-	struct device *dev = &epf->dev;
 	bool linkup_notifier = false;
-	bool msix_capable = false;
-	bool msi_capable = true;
+	bool core_init_notifier = false;
 
 	if (WARN_ON_ONCE(!epc))
 		return -EINVAL;
@@ -507,8 +829,7 @@ static int pci_epf_test_bind(struct pci_epf *epf)
 	epc_features = pci_epc_get_features(epc, epf->func_no);
 	if (epc_features) {
 		linkup_notifier = epc_features->linkup_notifier;
-		msix_capable = epc_features->msix_capable;
-		msi_capable = epc_features->msi_capable;
+		core_init_notifier = epc_features->core_init_notifier;
 		test_reg_bar = pci_epc_get_first_free_bar(epc_features);
 		pci_epf_configure_bar(epf, epc_features);
 	}
@@ -516,38 +837,28 @@ static int pci_epf_test_bind(struct pci_epf *epf)
 	epf_test->test_reg_bar = test_reg_bar;
 	epf_test->epc_features = epc_features;
 
-	ret = pci_epc_write_header(epc, epf->func_no, header);
-	if (ret) {
-		dev_err(dev, "Configuration header write failed\n");
-		return ret;
-	}
-
 	ret = pci_epf_test_alloc_space(epf);
 	if (ret)
 		return ret;
 
-	ret = pci_epf_test_set_bar(epf);
+	if (!core_init_notifier) {
+		ret = pci_epf_test_core_init(epf);
+		if (ret)
+			return ret;
+	}
+
+	epf_test->dma_supported = true;
+
+	ret = pci_epf_test_init_dma_chan(epf_test);
 	if (ret)
-		return ret;
+		epf_test->dma_supported = false;
 
-	if (msi_capable) {
-		ret = pci_epc_set_msi(epc, epf->func_no, epf->msi_interrupts);
-		if (ret) {
-			dev_err(dev, "MSI configuration failed\n");
-			return ret;
-		}
-	}
-
-	if (msix_capable) {
-		ret = pci_epc_set_msix(epc, epf->func_no, epf->msix_interrupts);
-		if (ret) {
-			dev_err(dev, "MSI-X configuration failed\n");
-			return ret;
-		}
-	}
-
-	if (!linkup_notifier)
+	if (linkup_notifier) {
+		epf->nb.notifier_call = pci_epf_test_notifier;
+		pci_epc_register_notifier(epc, &epf->nb);
+	} else {
 		queue_work(kpcitest_workqueue, &epf_test->cmd_handler.work);
+	}
 
 	return 0;
 }
@@ -580,7 +891,6 @@ static int pci_epf_test_probe(struct pci_epf *epf)
 static struct pci_epf_ops ops = {
 	.unbind	= pci_epf_test_unbind,
 	.bind	= pci_epf_test_bind,
-	.linkup = pci_epf_test_linkup,
 };
 
 static struct pci_epf_driver test_driver = {
diff --git a/drivers/pci/endpoint/pci-ep-cfs.c b/drivers/pci/endpoint/pci-ep-cfs.c
index d1288a0..55edce5 100644
--- a/drivers/pci/endpoint/pci-ep-cfs.c
+++ b/drivers/pci/endpoint/pci-ep-cfs.c
@@ -29,7 +29,6 @@ struct pci_epc_group {
 	struct config_group group;
 	struct pci_epc *epc;
 	bool start;
-	unsigned long function_num_map;
 };
 
 static inline struct pci_epf_group *to_pci_epf_group(struct config_item *item)
@@ -58,6 +57,7 @@ static ssize_t pci_epc_start_store(struct config_item *item, const char *page,
 
 	if (!start) {
 		pci_epc_stop(epc);
+		epc_group->start = 0;
 		return len;
 	}
 
@@ -89,37 +89,22 @@ static int pci_epc_epf_link(struct config_item *epc_item,
 			    struct config_item *epf_item)
 {
 	int ret;
-	u32 func_no = 0;
 	struct pci_epf_group *epf_group = to_pci_epf_group(epf_item);
 	struct pci_epc_group *epc_group = to_pci_epc_group(epc_item);
 	struct pci_epc *epc = epc_group->epc;
 	struct pci_epf *epf = epf_group->epf;
 
-	func_no = find_first_zero_bit(&epc_group->function_num_map,
-				      BITS_PER_LONG);
-	if (func_no >= BITS_PER_LONG)
-		return -EINVAL;
-
-	set_bit(func_no, &epc_group->function_num_map);
-	epf->func_no = func_no;
-
 	ret = pci_epc_add_epf(epc, epf);
 	if (ret)
-		goto err_add_epf;
+		return ret;
 
 	ret = pci_epf_bind(epf);
-	if (ret)
-		goto err_epf_bind;
+	if (ret) {
+		pci_epc_remove_epf(epc, epf);
+		return ret;
+	}
 
 	return 0;
-
-err_epf_bind:
-	pci_epc_remove_epf(epc, epf);
-
-err_add_epf:
-	clear_bit(func_no, &epc_group->function_num_map);
-
-	return ret;
 }
 
 static void pci_epc_epf_unlink(struct config_item *epc_item,
@@ -134,7 +119,6 @@ static void pci_epc_epf_unlink(struct config_item *epc_item,
 
 	epc = epc_group->epc;
 	epf = epf_group->epf;
-	clear_bit(epf->func_no, &epc_group->function_num_map);
 	pci_epf_unbind(epf);
 	pci_epc_remove_epf(epc, epf);
 }
diff --git a/drivers/pci/endpoint/pci-epc-core.c b/drivers/pci/endpoint/pci-epc-core.c
index 2091508..82ba0dc 100644
--- a/drivers/pci/endpoint/pci-epc-core.c
+++ b/drivers/pci/endpoint/pci-epc-core.c
@@ -120,7 +120,6 @@ const struct pci_epc_features *pci_epc_get_features(struct pci_epc *epc,
 						    u8 func_no)
 {
 	const struct pci_epc_features *epc_features;
-	unsigned long flags;
 
 	if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions)
 		return NULL;
@@ -128,9 +127,9 @@ const struct pci_epc_features *pci_epc_get_features(struct pci_epc *epc,
 	if (!epc->ops->get_features)
 		return NULL;
 
-	spin_lock_irqsave(&epc->lock, flags);
+	mutex_lock(&epc->lock);
 	epc_features = epc->ops->get_features(epc, func_no);
-	spin_unlock_irqrestore(&epc->lock, flags);
+	mutex_unlock(&epc->lock);
 
 	return epc_features;
 }
@@ -144,14 +143,12 @@ EXPORT_SYMBOL_GPL(pci_epc_get_features);
  */
 void pci_epc_stop(struct pci_epc *epc)
 {
-	unsigned long flags;
-
 	if (IS_ERR(epc) || !epc->ops->stop)
 		return;
 
-	spin_lock_irqsave(&epc->lock, flags);
+	mutex_lock(&epc->lock);
 	epc->ops->stop(epc);
-	spin_unlock_irqrestore(&epc->lock, flags);
+	mutex_unlock(&epc->lock);
 }
 EXPORT_SYMBOL_GPL(pci_epc_stop);
 
@@ -164,7 +161,6 @@ EXPORT_SYMBOL_GPL(pci_epc_stop);
 int pci_epc_start(struct pci_epc *epc)
 {
 	int ret;
-	unsigned long flags;
 
 	if (IS_ERR(epc))
 		return -EINVAL;
@@ -172,9 +168,9 @@ int pci_epc_start(struct pci_epc *epc)
 	if (!epc->ops->start)
 		return 0;
 
-	spin_lock_irqsave(&epc->lock, flags);
+	mutex_lock(&epc->lock);
 	ret = epc->ops->start(epc);
-	spin_unlock_irqrestore(&epc->lock, flags);
+	mutex_unlock(&epc->lock);
 
 	return ret;
 }
@@ -193,7 +189,6 @@ int pci_epc_raise_irq(struct pci_epc *epc, u8 func_no,
 		      enum pci_epc_irq_type type, u16 interrupt_num)
 {
 	int ret;
-	unsigned long flags;
 
 	if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions)
 		return -EINVAL;
@@ -201,9 +196,9 @@ int pci_epc_raise_irq(struct pci_epc *epc, u8 func_no,
 	if (!epc->ops->raise_irq)
 		return 0;
 
-	spin_lock_irqsave(&epc->lock, flags);
+	mutex_lock(&epc->lock);
 	ret = epc->ops->raise_irq(epc, func_no, type, interrupt_num);
-	spin_unlock_irqrestore(&epc->lock, flags);
+	mutex_unlock(&epc->lock);
 
 	return ret;
 }
@@ -219,7 +214,6 @@ EXPORT_SYMBOL_GPL(pci_epc_raise_irq);
 int pci_epc_get_msi(struct pci_epc *epc, u8 func_no)
 {
 	int interrupt;
-	unsigned long flags;
 
 	if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions)
 		return 0;
@@ -227,9 +221,9 @@ int pci_epc_get_msi(struct pci_epc *epc, u8 func_no)
 	if (!epc->ops->get_msi)
 		return 0;
 
-	spin_lock_irqsave(&epc->lock, flags);
+	mutex_lock(&epc->lock);
 	interrupt = epc->ops->get_msi(epc, func_no);
-	spin_unlock_irqrestore(&epc->lock, flags);
+	mutex_unlock(&epc->lock);
 
 	if (interrupt < 0)
 		return 0;
@@ -252,7 +246,6 @@ int pci_epc_set_msi(struct pci_epc *epc, u8 func_no, u8 interrupts)
 {
 	int ret;
 	u8 encode_int;
-	unsigned long flags;
 
 	if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions ||
 	    interrupts > 32)
@@ -263,9 +256,9 @@ int pci_epc_set_msi(struct pci_epc *epc, u8 func_no, u8 interrupts)
 
 	encode_int = order_base_2(interrupts);
 
-	spin_lock_irqsave(&epc->lock, flags);
+	mutex_lock(&epc->lock);
 	ret = epc->ops->set_msi(epc, func_no, encode_int);
-	spin_unlock_irqrestore(&epc->lock, flags);
+	mutex_unlock(&epc->lock);
 
 	return ret;
 }
@@ -281,7 +274,6 @@ EXPORT_SYMBOL_GPL(pci_epc_set_msi);
 int pci_epc_get_msix(struct pci_epc *epc, u8 func_no)
 {
 	int interrupt;
-	unsigned long flags;
 
 	if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions)
 		return 0;
@@ -289,9 +281,9 @@ int pci_epc_get_msix(struct pci_epc *epc, u8 func_no)
 	if (!epc->ops->get_msix)
 		return 0;
 
-	spin_lock_irqsave(&epc->lock, flags);
+	mutex_lock(&epc->lock);
 	interrupt = epc->ops->get_msix(epc, func_no);
-	spin_unlock_irqrestore(&epc->lock, flags);
+	mutex_unlock(&epc->lock);
 
 	if (interrupt < 0)
 		return 0;
@@ -305,13 +297,15 @@ EXPORT_SYMBOL_GPL(pci_epc_get_msix);
  * @epc: the EPC device on which MSI-X has to be configured
  * @func_no: the endpoint function number in the EPC device
  * @interrupts: number of MSI-X interrupts required by the EPF
+ * @bir: BAR where the MSI-X table resides
+ * @offset: Offset pointing to the start of MSI-X table
  *
  * Invoke to set the required number of MSI-X interrupts.
  */
-int pci_epc_set_msix(struct pci_epc *epc, u8 func_no, u16 interrupts)
+int pci_epc_set_msix(struct pci_epc *epc, u8 func_no, u16 interrupts,
+		     enum pci_barno bir, u32 offset)
 {
 	int ret;
-	unsigned long flags;
 
 	if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions ||
 	    interrupts < 1 || interrupts > 2048)
@@ -320,9 +314,9 @@ int pci_epc_set_msix(struct pci_epc *epc, u8 func_no, u16 interrupts)
 	if (!epc->ops->set_msix)
 		return 0;
 
-	spin_lock_irqsave(&epc->lock, flags);
-	ret = epc->ops->set_msix(epc, func_no, interrupts - 1);
-	spin_unlock_irqrestore(&epc->lock, flags);
+	mutex_lock(&epc->lock);
+	ret = epc->ops->set_msix(epc, func_no, interrupts - 1, bir, offset);
+	mutex_unlock(&epc->lock);
 
 	return ret;
 }
@@ -339,17 +333,15 @@ EXPORT_SYMBOL_GPL(pci_epc_set_msix);
 void pci_epc_unmap_addr(struct pci_epc *epc, u8 func_no,
 			phys_addr_t phys_addr)
 {
-	unsigned long flags;
-
 	if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions)
 		return;
 
 	if (!epc->ops->unmap_addr)
 		return;
 
-	spin_lock_irqsave(&epc->lock, flags);
+	mutex_lock(&epc->lock);
 	epc->ops->unmap_addr(epc, func_no, phys_addr);
-	spin_unlock_irqrestore(&epc->lock, flags);
+	mutex_unlock(&epc->lock);
 }
 EXPORT_SYMBOL_GPL(pci_epc_unmap_addr);
 
@@ -367,7 +359,6 @@ int pci_epc_map_addr(struct pci_epc *epc, u8 func_no,
 		     phys_addr_t phys_addr, u64 pci_addr, size_t size)
 {
 	int ret;
-	unsigned long flags;
 
 	if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions)
 		return -EINVAL;
@@ -375,9 +366,9 @@ int pci_epc_map_addr(struct pci_epc *epc, u8 func_no,
 	if (!epc->ops->map_addr)
 		return 0;
 
-	spin_lock_irqsave(&epc->lock, flags);
+	mutex_lock(&epc->lock);
 	ret = epc->ops->map_addr(epc, func_no, phys_addr, pci_addr, size);
-	spin_unlock_irqrestore(&epc->lock, flags);
+	mutex_unlock(&epc->lock);
 
 	return ret;
 }
@@ -394,8 +385,6 @@ EXPORT_SYMBOL_GPL(pci_epc_map_addr);
 void pci_epc_clear_bar(struct pci_epc *epc, u8 func_no,
 		       struct pci_epf_bar *epf_bar)
 {
-	unsigned long flags;
-
 	if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions ||
 	    (epf_bar->barno == BAR_5 &&
 	     epf_bar->flags & PCI_BASE_ADDRESS_MEM_TYPE_64))
@@ -404,9 +393,9 @@ void pci_epc_clear_bar(struct pci_epc *epc, u8 func_no,
 	if (!epc->ops->clear_bar)
 		return;
 
-	spin_lock_irqsave(&epc->lock, flags);
+	mutex_lock(&epc->lock);
 	epc->ops->clear_bar(epc, func_no, epf_bar);
-	spin_unlock_irqrestore(&epc->lock, flags);
+	mutex_unlock(&epc->lock);
 }
 EXPORT_SYMBOL_GPL(pci_epc_clear_bar);
 
@@ -422,7 +411,6 @@ int pci_epc_set_bar(struct pci_epc *epc, u8 func_no,
 		    struct pci_epf_bar *epf_bar)
 {
 	int ret;
-	unsigned long irq_flags;
 	int flags = epf_bar->flags;
 
 	if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions ||
@@ -437,9 +425,9 @@ int pci_epc_set_bar(struct pci_epc *epc, u8 func_no,
 	if (!epc->ops->set_bar)
 		return 0;
 
-	spin_lock_irqsave(&epc->lock, irq_flags);
+	mutex_lock(&epc->lock);
 	ret = epc->ops->set_bar(epc, func_no, epf_bar);
-	spin_unlock_irqrestore(&epc->lock, irq_flags);
+	mutex_unlock(&epc->lock);
 
 	return ret;
 }
@@ -460,7 +448,6 @@ int pci_epc_write_header(struct pci_epc *epc, u8 func_no,
 			 struct pci_epf_header *header)
 {
 	int ret;
-	unsigned long flags;
 
 	if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions)
 		return -EINVAL;
@@ -468,9 +455,9 @@ int pci_epc_write_header(struct pci_epc *epc, u8 func_no,
 	if (!epc->ops->write_header)
 		return 0;
 
-	spin_lock_irqsave(&epc->lock, flags);
+	mutex_lock(&epc->lock);
 	ret = epc->ops->write_header(epc, func_no, header);
-	spin_unlock_irqrestore(&epc->lock, flags);
+	mutex_unlock(&epc->lock);
 
 	return ret;
 }
@@ -487,7 +474,8 @@ EXPORT_SYMBOL_GPL(pci_epc_write_header);
  */
 int pci_epc_add_epf(struct pci_epc *epc, struct pci_epf *epf)
 {
-	unsigned long flags;
+	u32 func_no;
+	int ret = 0;
 
 	if (epf->epc)
 		return -EBUSY;
@@ -495,16 +483,30 @@ int pci_epc_add_epf(struct pci_epc *epc, struct pci_epf *epf)
 	if (IS_ERR(epc))
 		return -EINVAL;
 
-	if (epf->func_no > epc->max_functions - 1)
-		return -EINVAL;
+	mutex_lock(&epc->lock);
+	func_no = find_first_zero_bit(&epc->function_num_map,
+				      BITS_PER_LONG);
+	if (func_no >= BITS_PER_LONG) {
+		ret = -EINVAL;
+		goto ret;
+	}
 
+	if (func_no > epc->max_functions - 1) {
+		dev_err(&epc->dev, "Exceeding max supported Function Number\n");
+		ret = -EINVAL;
+		goto ret;
+	}
+
+	set_bit(func_no, &epc->function_num_map);
+	epf->func_no = func_no;
 	epf->epc = epc;
 
-	spin_lock_irqsave(&epc->lock, flags);
 	list_add_tail(&epf->list, &epc->pci_epf);
-	spin_unlock_irqrestore(&epc->lock, flags);
 
-	return 0;
+ret:
+	mutex_unlock(&epc->lock);
+
+	return ret;
 }
 EXPORT_SYMBOL_GPL(pci_epc_add_epf);
 
@@ -517,15 +519,14 @@ EXPORT_SYMBOL_GPL(pci_epc_add_epf);
  */
 void pci_epc_remove_epf(struct pci_epc *epc, struct pci_epf *epf)
 {
-	unsigned long flags;
-
 	if (!epc || IS_ERR(epc) || !epf)
 		return;
 
-	spin_lock_irqsave(&epc->lock, flags);
+	mutex_lock(&epc->lock);
+	clear_bit(epf->func_no, &epc->function_num_map);
 	list_del(&epf->list);
 	epf->epc = NULL;
-	spin_unlock_irqrestore(&epc->lock, flags);
+	mutex_unlock(&epc->lock);
 }
 EXPORT_SYMBOL_GPL(pci_epc_remove_epf);
 
@@ -539,20 +540,31 @@ EXPORT_SYMBOL_GPL(pci_epc_remove_epf);
  */
 void pci_epc_linkup(struct pci_epc *epc)
 {
-	unsigned long flags;
-	struct pci_epf *epf;
-
 	if (!epc || IS_ERR(epc))
 		return;
 
-	spin_lock_irqsave(&epc->lock, flags);
-	list_for_each_entry(epf, &epc->pci_epf, list)
-		pci_epf_linkup(epf);
-	spin_unlock_irqrestore(&epc->lock, flags);
+	atomic_notifier_call_chain(&epc->notifier, LINK_UP, NULL);
 }
 EXPORT_SYMBOL_GPL(pci_epc_linkup);
 
 /**
+ * pci_epc_init_notify() - Notify the EPF device that EPC device's core
+ *			   initialization is completed.
+ * @epc: the EPC device whose core initialization is completeds
+ *
+ * Invoke to Notify the EPF device that the EPC device's initialization
+ * is completed.
+ */
+void pci_epc_init_notify(struct pci_epc *epc)
+{
+	if (!epc || IS_ERR(epc))
+		return;
+
+	atomic_notifier_call_chain(&epc->notifier, CORE_INIT, NULL);
+}
+EXPORT_SYMBOL_GPL(pci_epc_init_notify);
+
+/**
  * pci_epc_destroy() - destroy the EPC device
  * @epc: the EPC device that has to be destroyed
  *
@@ -610,8 +622,9 @@ __pci_epc_create(struct device *dev, const struct pci_epc_ops *ops,
 		goto err_ret;
 	}
 
-	spin_lock_init(&epc->lock);
+	mutex_init(&epc->lock);
 	INIT_LIST_HEAD(&epc->pci_epf);
+	ATOMIC_INIT_NOTIFIER_HEAD(&epc->notifier);
 
 	device_initialize(&epc->dev);
 	epc->dev.class = pci_epc_class;
diff --git a/drivers/pci/endpoint/pci-epc-mem.c b/drivers/pci/endpoint/pci-epc-mem.c
index d2b174c..abfac11 100644
--- a/drivers/pci/endpoint/pci-epc-mem.c
+++ b/drivers/pci/endpoint/pci-epc-mem.c
@@ -79,6 +79,7 @@ int __pci_epc_mem_init(struct pci_epc *epc, phys_addr_t phys_base, size_t size,
 	mem->page_size = page_size;
 	mem->pages = pages;
 	mem->size = size;
+	mutex_init(&mem->lock);
 
 	epc->mem = mem;
 
@@ -122,7 +123,7 @@ void __iomem *pci_epc_mem_alloc_addr(struct pci_epc *epc,
 				     phys_addr_t *phys_addr, size_t size)
 {
 	int pageno;
-	void __iomem *virt_addr;
+	void __iomem *virt_addr = NULL;
 	struct pci_epc_mem *mem = epc->mem;
 	unsigned int page_shift = ilog2(mem->page_size);
 	int order;
@@ -130,15 +131,18 @@ void __iomem *pci_epc_mem_alloc_addr(struct pci_epc *epc,
 	size = ALIGN(size, mem->page_size);
 	order = pci_epc_mem_get_order(mem, size);
 
+	mutex_lock(&mem->lock);
 	pageno = bitmap_find_free_region(mem->bitmap, mem->pages, order);
 	if (pageno < 0)
-		return NULL;
+		goto ret;
 
 	*phys_addr = mem->phys_base + ((phys_addr_t)pageno << page_shift);
 	virt_addr = ioremap(*phys_addr, size);
 	if (!virt_addr)
 		bitmap_release_region(mem->bitmap, pageno, order);
 
+ret:
+	mutex_unlock(&mem->lock);
 	return virt_addr;
 }
 EXPORT_SYMBOL_GPL(pci_epc_mem_alloc_addr);
@@ -164,7 +168,9 @@ void pci_epc_mem_free_addr(struct pci_epc *epc, phys_addr_t phys_addr,
 	pageno = (phys_addr - mem->phys_base) >> page_shift;
 	size = ALIGN(size, mem->page_size);
 	order = pci_epc_mem_get_order(mem, size);
+	mutex_lock(&mem->lock);
 	bitmap_release_region(mem->bitmap, pageno, order);
+	mutex_unlock(&mem->lock);
 }
 EXPORT_SYMBOL_GPL(pci_epc_mem_free_addr);
 
diff --git a/drivers/pci/endpoint/pci-epf-core.c b/drivers/pci/endpoint/pci-epf-core.c
index fb1306d..244e00f 100644
--- a/drivers/pci/endpoint/pci-epf-core.c
+++ b/drivers/pci/endpoint/pci-epf-core.c
@@ -21,26 +21,6 @@ static struct bus_type pci_epf_bus_type;
 static const struct device_type pci_epf_type;
 
 /**
- * pci_epf_linkup() - Notify the function driver that EPC device has
- *		      established a connection with the Root Complex.
- * @epf: the EPF device bound to the EPC device which has established
- *	 the connection with the host
- *
- * Invoke to notify the function driver that EPC device has established
- * a connection with the Root Complex.
- */
-void pci_epf_linkup(struct pci_epf *epf)
-{
-	if (!epf->driver) {
-		dev_WARN(&epf->dev, "epf device not bound to driver\n");
-		return;
-	}
-
-	epf->driver->ops->linkup(epf);
-}
-EXPORT_SYMBOL_GPL(pci_epf_linkup);
-
-/**
  * pci_epf_unbind() - Notify the function driver that the binding between the
  *		      EPF device and EPC device has been lost
  * @epf: the EPF device which has lost the binding with the EPC device
@@ -55,7 +35,9 @@ void pci_epf_unbind(struct pci_epf *epf)
 		return;
 	}
 
+	mutex_lock(&epf->lock);
 	epf->driver->ops->unbind(epf);
+	mutex_unlock(&epf->lock);
 	module_put(epf->driver->owner);
 }
 EXPORT_SYMBOL_GPL(pci_epf_unbind);
@@ -69,6 +51,8 @@ EXPORT_SYMBOL_GPL(pci_epf_unbind);
  */
 int pci_epf_bind(struct pci_epf *epf)
 {
+	int ret;
+
 	if (!epf->driver) {
 		dev_WARN(&epf->dev, "epf device not bound to driver\n");
 		return -EINVAL;
@@ -77,7 +61,11 @@ int pci_epf_bind(struct pci_epf *epf)
 	if (!try_module_get(epf->driver->owner))
 		return -EAGAIN;
 
-	return epf->driver->ops->bind(epf);
+	mutex_lock(&epf->lock);
+	ret = epf->driver->ops->bind(epf);
+	mutex_unlock(&epf->lock);
+
+	return ret;
 }
 EXPORT_SYMBOL_GPL(pci_epf_bind);
 
@@ -99,6 +87,7 @@ void pci_epf_free_space(struct pci_epf *epf, void *addr, enum pci_barno bar)
 			  epf->bar[bar].phys_addr);
 
 	epf->bar[bar].phys_addr = 0;
+	epf->bar[bar].addr = NULL;
 	epf->bar[bar].size = 0;
 	epf->bar[bar].barno = 0;
 	epf->bar[bar].flags = 0;
@@ -135,6 +124,7 @@ void *pci_epf_alloc_space(struct pci_epf *epf, size_t size, enum pci_barno bar,
 	}
 
 	epf->bar[bar].phys_addr = phys_addr;
+	epf->bar[bar].addr = space;
 	epf->bar[bar].size = size;
 	epf->bar[bar].barno = bar;
 	epf->bar[bar].flags |= upper_32_bits(size) ?
@@ -214,7 +204,7 @@ int __pci_epf_register_driver(struct pci_epf_driver *driver,
 	if (!driver->ops)
 		return -EINVAL;
 
-	if (!driver->ops->bind || !driver->ops->unbind || !driver->ops->linkup)
+	if (!driver->ops->bind || !driver->ops->unbind)
 		return -EINVAL;
 
 	driver->driver.bus = &pci_epf_bus_type;
@@ -272,6 +262,7 @@ struct pci_epf *pci_epf_create(const char *name)
 	device_initialize(dev);
 	dev->bus = &pci_epf_bus_type;
 	dev->type = &pci_epf_type;
+	mutex_init(&epf->lock);
 
 	ret = dev_set_name(dev, "%s", name);
 	if (ret) {
diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h
index aa61d4c..ae44f46 100644
--- a/drivers/pci/hotplug/pciehp.h
+++ b/drivers/pci/hotplug/pciehp.h
@@ -84,6 +84,7 @@ struct controller {
 	struct pcie_device *pcie;
 
 	u32 slot_cap;				/* capabilities and quirks */
+	unsigned int inband_presence_disabled:1;
 
 	u16 slot_ctrl;				/* control register access */
 	struct mutex ctrl_lock;
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 8a2cb17..53433b3 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -14,6 +14,7 @@
 
 #define dev_fmt(fmt) "pciehp: " fmt
 
+#include <linux/dmi.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/jiffies.h>
@@ -26,6 +27,24 @@
 #include "../pci.h"
 #include "pciehp.h"
 
+static const struct dmi_system_id inband_presence_disabled_dmi_table[] = {
+	/*
+	 * Match all Dell systems, as some Dell systems have inband
+	 * presence disabled on NVMe slots (but don't support the bit to
+	 * report it). Setting inband presence disabled should have no
+	 * negative effect, except on broken hotplug slots that never
+	 * assert presence detect--and those will still work, they will
+	 * just have a bit of extra delay before being probed.
+	 */
+	{
+		.ident = "Dell System",
+		.matches = {
+			DMI_MATCH(DMI_OEM_STRING, "Dell System"),
+		},
+	},
+	{}
+};
+
 static inline struct pci_dev *ctrl_dev(struct controller *ctrl)
 {
 	return ctrl->pcie->port;
@@ -252,6 +271,22 @@ static bool pci_bus_check_dev(struct pci_bus *bus, int devfn)
 	return found;
 }
 
+static void pcie_wait_for_presence(struct pci_dev *pdev)
+{
+	int timeout = 1250;
+	u16 slot_status;
+
+	do {
+		pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status);
+		if (slot_status & PCI_EXP_SLTSTA_PDS)
+			return;
+		msleep(10);
+		timeout -= 10;
+	} while (timeout > 0);
+
+	pci_info(pdev, "Timeout waiting for Presence Detect\n");
+}
+
 int pciehp_check_link_status(struct controller *ctrl)
 {
 	struct pci_dev *pdev = ctrl_dev(ctrl);
@@ -261,6 +296,9 @@ int pciehp_check_link_status(struct controller *ctrl)
 	if (!pcie_wait_for_link(pdev, true))
 		return -1;
 
+	if (ctrl->inband_presence_disabled)
+		pcie_wait_for_presence(pdev);
+
 	found = pci_bus_check_dev(ctrl->pcie->port->subordinate,
 					PCI_DEVFN(0, 0));
 
@@ -527,7 +565,7 @@ static irqreturn_t pciehp_isr(int irq, void *dev_id)
 	struct controller *ctrl = (struct controller *)dev_id;
 	struct pci_dev *pdev = ctrl_dev(ctrl);
 	struct device *parent = pdev->dev.parent;
-	u16 status, events;
+	u16 status, events = 0;
 
 	/*
 	 * Interrupts only occur in D3hot or shallower and only if enabled
@@ -552,6 +590,7 @@ static irqreturn_t pciehp_isr(int irq, void *dev_id)
 		}
 	}
 
+read_status:
 	pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &status);
 	if (status == (u16) ~0) {
 		ctrl_info(ctrl, "%s: no response from device\n", __func__);
@@ -564,24 +603,37 @@ static irqreturn_t pciehp_isr(int irq, void *dev_id)
 	 * Slot Status contains plain status bits as well as event
 	 * notification bits; right now we only want the event bits.
 	 */
-	events = status & (PCI_EXP_SLTSTA_ABP | PCI_EXP_SLTSTA_PFD |
-			   PCI_EXP_SLTSTA_PDC | PCI_EXP_SLTSTA_CC |
-			   PCI_EXP_SLTSTA_DLLSC);
+	status &= PCI_EXP_SLTSTA_ABP | PCI_EXP_SLTSTA_PFD |
+		  PCI_EXP_SLTSTA_PDC | PCI_EXP_SLTSTA_CC |
+		  PCI_EXP_SLTSTA_DLLSC;
 
 	/*
 	 * If we've already reported a power fault, don't report it again
 	 * until we've done something to handle it.
 	 */
 	if (ctrl->power_fault_detected)
-		events &= ~PCI_EXP_SLTSTA_PFD;
+		status &= ~PCI_EXP_SLTSTA_PFD;
 
+	events |= status;
 	if (!events) {
 		if (parent)
 			pm_runtime_put(parent);
 		return IRQ_NONE;
 	}
 
-	pcie_capability_write_word(pdev, PCI_EXP_SLTSTA, events);
+	if (status) {
+		pcie_capability_write_word(pdev, PCI_EXP_SLTSTA, events);
+
+		/*
+		 * In MSI mode, all event bits must be zero before the port
+		 * will send a new interrupt (PCIe Base Spec r5.0 sec 6.7.3.4).
+		 * So re-read the Slot Status register in case a bit was set
+		 * between read and write.
+		 */
+		if (pci_dev_msi_enabled(pdev) && !pciehp_poll_mode)
+			goto read_status;
+	}
+
 	ctrl_dbg(ctrl, "pending interrupts %#06x from Slot Status\n", events);
 	if (parent)
 		pm_runtime_put(parent);
@@ -625,17 +677,15 @@ static irqreturn_t pciehp_ist(int irq, void *dev_id)
 	if (atomic_fetch_and(~RERUN_ISR, &ctrl->pending_events) & RERUN_ISR) {
 		ret = pciehp_isr(irq, dev_id);
 		enable_irq(irq);
-		if (ret != IRQ_WAKE_THREAD) {
-			pci_config_pm_runtime_put(pdev);
-			return ret;
-		}
+		if (ret != IRQ_WAKE_THREAD)
+			goto out;
 	}
 
 	synchronize_hardirq(irq);
 	events = atomic_xchg(&ctrl->pending_events, 0);
 	if (!events) {
-		pci_config_pm_runtime_put(pdev);
-		return IRQ_NONE;
+		ret = IRQ_NONE;
+		goto out;
 	}
 
 	/* Check Attention Button Pressed */
@@ -664,10 +714,12 @@ static irqreturn_t pciehp_ist(int irq, void *dev_id)
 		pciehp_handle_presence_or_link_change(ctrl, events);
 	up_read(&ctrl->reset_lock);
 
+	ret = IRQ_HANDLED;
+out:
 	pci_config_pm_runtime_put(pdev);
 	ctrl->ist_running = false;
 	wake_up(&ctrl->requester);
-	return IRQ_HANDLED;
+	return ret;
 }
 
 static int pciehp_poll(void *data)
@@ -848,7 +900,7 @@ static inline void dbg_ctrl(struct controller *ctrl)
 struct controller *pcie_init(struct pcie_device *dev)
 {
 	struct controller *ctrl;
-	u32 slot_cap, link_cap;
+	u32 slot_cap, slot_cap2, link_cap;
 	u8 poweron;
 	struct pci_dev *pdev = dev->port;
 	struct pci_bus *subordinate = pdev->subordinate;
@@ -883,6 +935,16 @@ struct controller *pcie_init(struct pcie_device *dev)
 	ctrl->state = list_empty(&subordinate->devices) ? OFF_STATE : ON_STATE;
 	up_read(&pci_bus_sem);
 
+	pcie_capability_read_dword(pdev, PCI_EXP_SLTCAP2, &slot_cap2);
+	if (slot_cap2 & PCI_EXP_SLTCAP2_IBPD) {
+		pcie_write_cmd_nowait(ctrl, PCI_EXP_SLTCTL_IBPD_DISABLE,
+				      PCI_EXP_SLTCTL_IBPD_DISABLE);
+		ctrl->inband_presence_disabled = 1;
+	}
+
+	if (dmi_first_match(inband_presence_disabled_dmi_table))
+		ctrl->inband_presence_disabled = 1;
+
 	/* Check if Data Link Layer Link Active Reporting is implemented */
 	pcie_capability_read_dword(pdev, PCI_EXP_LNKCAP, &link_cap);
 
@@ -892,7 +954,7 @@ struct controller *pcie_init(struct pcie_device *dev)
 		PCI_EXP_SLTSTA_MRLSC | PCI_EXP_SLTSTA_CC |
 		PCI_EXP_SLTSTA_DLLSC | PCI_EXP_SLTSTA_PDC);
 
-	ctrl_info(ctrl, "Slot #%d AttnBtn%c PwrCtrl%c MRL%c AttnInd%c PwrInd%c HotPlug%c Surprise%c Interlock%c NoCompl%c LLActRep%c%s\n",
+	ctrl_info(ctrl, "Slot #%d AttnBtn%c PwrCtrl%c MRL%c AttnInd%c PwrInd%c HotPlug%c Surprise%c Interlock%c NoCompl%c IbPresDis%c LLActRep%c%s\n",
 		(slot_cap & PCI_EXP_SLTCAP_PSN) >> 19,
 		FLAG(slot_cap, PCI_EXP_SLTCAP_ABP),
 		FLAG(slot_cap, PCI_EXP_SLTCAP_PCP),
@@ -903,6 +965,7 @@ struct controller *pcie_init(struct pcie_device *dev)
 		FLAG(slot_cap, PCI_EXP_SLTCAP_HPS),
 		FLAG(slot_cap, PCI_EXP_SLTCAP_EIP),
 		FLAG(slot_cap, PCI_EXP_SLTCAP_NCCS),
+		FLAG(slot_cap2, PCI_EXP_SLTCAP2_IBPD),
 		FLAG(link_cap, PCI_EXP_LNKCAP_DLLLARC),
 		pdev->broken_cmd_compl ? " (with Cmd Compl erratum)" : "");
 
diff --git a/drivers/pci/hotplug/rpadlpar_core.c b/drivers/pci/hotplug/rpadlpar_core.c
index 977946e..c5eb509 100644
--- a/drivers/pci/hotplug/rpadlpar_core.c
+++ b/drivers/pci/hotplug/rpadlpar_core.c
@@ -140,7 +140,7 @@ static void dlpar_pci_add_bus(struct device_node *dn)
 	struct pci_controller *phb = pdn->phb;
 	struct pci_dev *dev = NULL;
 
-	eeh_add_device_tree_early(pdn);
+	pseries_eeh_init_edev_recursive(pdn);
 
 	/* Add EADS device to PHB bus, adding new entry to bus->devices */
 	dev = of_create_pci_dev(dn, phb->bus, pdn->devfn);
diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c
index e408e40..6504869 100644
--- a/drivers/pci/hotplug/rpaphp_core.c
+++ b/drivers/pci/hotplug/rpaphp_core.c
@@ -288,11 +288,10 @@ EXPORT_SYMBOL_GPL(rpaphp_check_drc_props);
 
 static int is_php_type(char *drc_type)
 {
-	unsigned long value;
 	char *endptr;
 
 	/* PCI Hotplug nodes have an integer for drc_type */
-	value = simple_strtoul(drc_type, &endptr, 10);
+	simple_strtoul(drc_type, &endptr, 10);
 	if (endptr == drc_type)
 		return 0;
 
@@ -494,6 +493,8 @@ static int enable_slot(struct hotplug_slot *hotplug_slot)
 		return retval;
 
 	if (state == PRESENT) {
+		pseries_eeh_init_edev_recursive(PCI_DN(slot->dn));
+
 		pci_lock_rescan_remove();
 		pci_hp_add_devices(slot->bus);
 		pci_unlock_rescan_remove();
diff --git a/drivers/pci/hotplug/rpaphp_pci.c b/drivers/pci/hotplug/rpaphp_pci.c
index beca61b..c380bda 100644
--- a/drivers/pci/hotplug/rpaphp_pci.c
+++ b/drivers/pci/hotplug/rpaphp_pci.c
@@ -95,8 +95,10 @@ int rpaphp_enable_slot(struct slot *slot)
 			return -EINVAL;
 		}
 
-		if (list_empty(&bus->devices))
+		if (list_empty(&bus->devices)) {
+			pseries_eeh_init_edev_recursive(PCI_DN(slot->dn));
 			pci_hp_add_devices(bus);
+		}
 
 		if (!list_empty(&bus->devices)) {
 			slot->state = CONFIGURED;
diff --git a/drivers/pci/hotplug/s390_pci_hpc.c b/drivers/pci/hotplug/s390_pci_hpc.c
index 30ee722..39295d8 100644
--- a/drivers/pci/hotplug/s390_pci_hpc.c
+++ b/drivers/pci/hotplug/s390_pci_hpc.c
@@ -19,7 +19,6 @@
 #include <asm/sclp.h>
 
 #define SLOT_NAME_SIZE	10
-static LIST_HEAD(s390_hotplug_slot_list);
 
 static int zpci_fn_configured(enum zpci_state state)
 {
@@ -27,97 +26,86 @@ static int zpci_fn_configured(enum zpci_state state)
 	       state == ZPCI_FN_STATE_ONLINE;
 }
 
-/*
- * struct slot - slot information for each *physical* slot
- */
-struct slot {
-	struct list_head slot_list;
-	struct hotplug_slot hotplug_slot;
-	struct zpci_dev *zdev;
-};
-
-static inline struct slot *to_slot(struct hotplug_slot *hotplug_slot)
+static inline int zdev_configure(struct zpci_dev *zdev)
 {
-	return container_of(hotplug_slot, struct slot, hotplug_slot);
-}
+	int ret = sclp_pci_configure(zdev->fid);
 
-static inline int slot_configure(struct slot *slot)
-{
-	int ret = sclp_pci_configure(slot->zdev->fid);
-
-	zpci_dbg(3, "conf fid:%x, rc:%d\n", slot->zdev->fid, ret);
+	zpci_dbg(3, "conf fid:%x, rc:%d\n", zdev->fid, ret);
 	if (!ret)
-		slot->zdev->state = ZPCI_FN_STATE_CONFIGURED;
+		zdev->state = ZPCI_FN_STATE_CONFIGURED;
 
 	return ret;
 }
 
-static inline int slot_deconfigure(struct slot *slot)
+static inline int zdev_deconfigure(struct zpci_dev *zdev)
 {
-	int ret = sclp_pci_deconfigure(slot->zdev->fid);
+	int ret = sclp_pci_deconfigure(zdev->fid);
 
-	zpci_dbg(3, "deconf fid:%x, rc:%d\n", slot->zdev->fid, ret);
+	zpci_dbg(3, "deconf fid:%x, rc:%d\n", zdev->fid, ret);
 	if (!ret)
-		slot->zdev->state = ZPCI_FN_STATE_STANDBY;
+		zdev->state = ZPCI_FN_STATE_STANDBY;
 
 	return ret;
 }
 
 static int enable_slot(struct hotplug_slot *hotplug_slot)
 {
-	struct slot *slot = to_slot(hotplug_slot);
+	struct zpci_dev *zdev = container_of(hotplug_slot, struct zpci_dev,
+					     hotplug_slot);
 	int rc;
 
-	if (slot->zdev->state != ZPCI_FN_STATE_STANDBY)
+	if (zdev->state != ZPCI_FN_STATE_STANDBY)
 		return -EIO;
 
-	rc = slot_configure(slot);
+	rc = zdev_configure(zdev);
 	if (rc)
 		return rc;
 
-	rc = zpci_enable_device(slot->zdev);
+	rc = zpci_enable_device(zdev);
 	if (rc)
 		goto out_deconfigure;
 
-	pci_scan_slot(slot->zdev->bus, ZPCI_DEVFN);
+	pci_scan_slot(zdev->bus, ZPCI_DEVFN);
 	pci_lock_rescan_remove();
-	pci_bus_add_devices(slot->zdev->bus);
+	pci_bus_add_devices(zdev->bus);
 	pci_unlock_rescan_remove();
 
 	return rc;
 
 out_deconfigure:
-	slot_deconfigure(slot);
+	zdev_deconfigure(zdev);
 	return rc;
 }
 
 static int disable_slot(struct hotplug_slot *hotplug_slot)
 {
-	struct slot *slot = to_slot(hotplug_slot);
+	struct zpci_dev *zdev = container_of(hotplug_slot, struct zpci_dev,
+					     hotplug_slot);
 	struct pci_dev *pdev;
 	int rc;
 
-	if (!zpci_fn_configured(slot->zdev->state))
+	if (!zpci_fn_configured(zdev->state))
 		return -EIO;
 
-	pdev = pci_get_slot(slot->zdev->bus, ZPCI_DEVFN);
+	pdev = pci_get_slot(zdev->bus, ZPCI_DEVFN);
 	if (pdev) {
 		pci_stop_and_remove_bus_device_locked(pdev);
 		pci_dev_put(pdev);
 	}
 
-	rc = zpci_disable_device(slot->zdev);
+	rc = zpci_disable_device(zdev);
 	if (rc)
 		return rc;
 
-	return slot_deconfigure(slot);
+	return zdev_deconfigure(zdev);
 }
 
 static int get_power_status(struct hotplug_slot *hotplug_slot, u8 *value)
 {
-	struct slot *slot = to_slot(hotplug_slot);
+	struct zpci_dev *zdev = container_of(hotplug_slot, struct zpci_dev,
+					     hotplug_slot);
 
-	switch (slot->zdev->state) {
+	switch (zdev->state) {
 	case ZPCI_FN_STATE_STANDBY:
 		*value = 0;
 		break;
@@ -145,44 +133,15 @@ static const struct hotplug_slot_ops s390_hotplug_slot_ops = {
 int zpci_init_slot(struct zpci_dev *zdev)
 {
 	char name[SLOT_NAME_SIZE];
-	struct slot *slot;
-	int rc;
 
-	if (!zdev)
-		return 0;
-
-	slot = kzalloc(sizeof(*slot), GFP_KERNEL);
-	if (!slot)
-		goto error;
-
-	slot->zdev = zdev;
-	slot->hotplug_slot.ops = &s390_hotplug_slot_ops;
+	zdev->hotplug_slot.ops = &s390_hotplug_slot_ops;
 
 	snprintf(name, SLOT_NAME_SIZE, "%08x", zdev->fid);
-	rc = pci_hp_register(&slot->hotplug_slot, zdev->bus,
-			     ZPCI_DEVFN, name);
-	if (rc)
-		goto error_reg;
-
-	list_add(&slot->slot_list, &s390_hotplug_slot_list);
-	return 0;
-
-error_reg:
-	kfree(slot);
-error:
-	return -ENOMEM;
+	return pci_hp_register(&zdev->hotplug_slot, zdev->bus,
+			       ZPCI_DEVFN, name);
 }
 
 void zpci_exit_slot(struct zpci_dev *zdev)
 {
-	struct slot *slot, *next;
-
-	list_for_each_entry_safe(slot, next, &s390_hotplug_slot_list,
-				 slot_list) {
-		if (slot->zdev != zdev)
-			continue;
-		list_del(&slot->slot_list);
-		pci_hp_deregister(&slot->hotplug_slot);
-		kfree(slot);
-	}
+	pci_hp_deregister(&zdev->hotplug_slot);
 }
diff --git a/drivers/pci/p2pdma.c b/drivers/pci/p2pdma.c
index 9a8a383..b73b10b 100644
--- a/drivers/pci/p2pdma.c
+++ b/drivers/pci/p2pdma.c
@@ -291,6 +291,9 @@ static const struct pci_p2pdma_whitelist_entry {
 	{PCI_VENDOR_ID_INTEL,	0x2f01, REQ_SAME_HOST_BRIDGE},
 	/* Intel SkyLake-E */
 	{PCI_VENDOR_ID_INTEL,	0x2030, 0},
+	{PCI_VENDOR_ID_INTEL,	0x2031, 0},
+	{PCI_VENDOR_ID_INTEL,	0x2032, 0},
+	{PCI_VENDOR_ID_INTEL,	0x2033, 0},
 	{PCI_VENDOR_ID_INTEL,	0x2020, 0},
 	{}
 };
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index 0c02d50..d21969f 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -439,7 +439,7 @@ enum hpx_type3_dev_type {
 static u16 hpx3_device_type(struct pci_dev *dev)
 {
 	u16 pcie_type = pci_pcie_type(dev);
-	const int pcie_to_hpx3_type[] = {
+	static const int pcie_to_hpx3_type[] = {
 		[PCI_EXP_TYPE_ENDPOINT]    = HPX_TYPE_ENDPOINT,
 		[PCI_EXP_TYPE_LEG_END]     = HPX_TYPE_LEG_END,
 		[PCI_EXP_TYPE_RC_END]      = HPX_TYPE_RC_END,
@@ -1241,6 +1241,7 @@ static void pci_acpi_setup(struct device *dev)
 
 	pci_acpi_optimize_delay(pci_dev, adev->handle);
 	pci_acpi_set_untrusted(pci_dev);
+	pci_acpi_add_edr_notifier(pci_dev);
 
 	pci_acpi_add_pm_notifier(adev, pci_dev);
 	if (!adev->wakeup.flags.valid)
@@ -1268,6 +1269,7 @@ static void pci_acpi_cleanup(struct device *dev)
 	if (!adev)
 		return;
 
+	pci_acpi_remove_edr_notifier(pci_dev);
 	pci_acpi_remove_pm_notifier(adev);
 	if (adev->wakeup.flags.valid) {
 		acpi_device_power_remove_dependent(adev, dev);
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 13f766d..6d78df9 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -156,7 +156,8 @@ static ssize_t max_link_speed_show(struct device *dev,
 {
 	struct pci_dev *pdev = to_pci_dev(dev);
 
-	return sprintf(buf, "%s\n", PCIE_SPEED2STR(pcie_get_speed_cap(pdev)));
+	return sprintf(buf, "%s\n",
+		       pci_speed_string(pcie_get_speed_cap(pdev)));
 }
 static DEVICE_ATTR_RO(max_link_speed);
 
@@ -175,33 +176,15 @@ static ssize_t current_link_speed_show(struct device *dev,
 	struct pci_dev *pci_dev = to_pci_dev(dev);
 	u16 linkstat;
 	int err;
-	const char *speed;
+	enum pci_bus_speed speed;
 
 	err = pcie_capability_read_word(pci_dev, PCI_EXP_LNKSTA, &linkstat);
 	if (err)
 		return -EINVAL;
 
-	switch (linkstat & PCI_EXP_LNKSTA_CLS) {
-	case PCI_EXP_LNKSTA_CLS_32_0GB:
-		speed = "32 GT/s";
-		break;
-	case PCI_EXP_LNKSTA_CLS_16_0GB:
-		speed = "16 GT/s";
-		break;
-	case PCI_EXP_LNKSTA_CLS_8_0GB:
-		speed = "8 GT/s";
-		break;
-	case PCI_EXP_LNKSTA_CLS_5_0GB:
-		speed = "5 GT/s";
-		break;
-	case PCI_EXP_LNKSTA_CLS_2_5GB:
-		speed = "2.5 GT/s";
-		break;
-	default:
-		speed = "Unknown speed";
-	}
+	speed = pcie_link_speed[linkstat & PCI_EXP_LNKSTA_CLS];
 
-	return sprintf(buf, "%s\n", speed);
+	return sprintf(buf, "%s\n", pci_speed_string(speed));
 }
 static DEVICE_ATTR_RO(current_link_speed);
 
@@ -464,7 +447,8 @@ static ssize_t dev_rescan_store(struct device *dev,
 	}
 	return count;
 }
-static DEVICE_ATTR_WO(dev_rescan);
+static struct device_attribute dev_attr_dev_rescan = __ATTR(rescan, 0200, NULL,
+							    dev_rescan_store);
 
 static ssize_t remove_store(struct device *dev, struct device_attribute *attr,
 			    const char *buf, size_t count)
@@ -501,7 +485,8 @@ static ssize_t bus_rescan_store(struct device *dev,
 	}
 	return count;
 }
-static DEVICE_ATTR_WO(bus_rescan);
+static struct device_attribute dev_attr_bus_rescan = __ATTR(rescan, 0200, NULL,
+							    bus_rescan_store);
 
 #if defined(CONFIG_PM) && defined(CONFIG_ACPI)
 static ssize_t d3cold_allowed_store(struct device *dev,
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 8682131..595fcf5 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1560,7 +1560,7 @@ void pci_restore_state(struct pci_dev *dev)
 	pci_restore_rebar_state(dev);
 	pci_restore_dpc_state(dev);
 
-	pci_cleanup_aer_error_status_regs(dev);
+	pci_aer_clear_status(dev);
 	pci_restore_aer_state(dev);
 
 	pci_restore_config_space(dev);
@@ -5841,19 +5841,10 @@ enum pci_bus_speed pcie_get_speed_cap(struct pci_dev *dev)
 	 * where only 2.5 GT/s and 5.0 GT/s speeds were defined.
 	 */
 	pcie_capability_read_dword(dev, PCI_EXP_LNKCAP2, &lnkcap2);
-	if (lnkcap2) { /* PCIe r3.0-compliant */
-		if (lnkcap2 & PCI_EXP_LNKCAP2_SLS_32_0GB)
-			return PCIE_SPEED_32_0GT;
-		else if (lnkcap2 & PCI_EXP_LNKCAP2_SLS_16_0GB)
-			return PCIE_SPEED_16_0GT;
-		else if (lnkcap2 & PCI_EXP_LNKCAP2_SLS_8_0GB)
-			return PCIE_SPEED_8_0GT;
-		else if (lnkcap2 & PCI_EXP_LNKCAP2_SLS_5_0GB)
-			return PCIE_SPEED_5_0GT;
-		else if (lnkcap2 & PCI_EXP_LNKCAP2_SLS_2_5GB)
-			return PCIE_SPEED_2_5GT;
-		return PCI_SPEED_UNKNOWN;
-	}
+
+	/* PCIe r3.0-compliant */
+	if (lnkcap2)
+		return PCIE_LNKCAP2_SLS2SPEED(lnkcap2);
 
 	pcie_capability_read_dword(dev, PCI_EXP_LNKCAP, &lnkcap);
 	if ((lnkcap & PCI_EXP_LNKCAP_SLS) == PCI_EXP_LNKCAP_SLS_5_0GB)
@@ -5929,14 +5920,14 @@ void __pcie_print_link_status(struct pci_dev *dev, bool verbose)
 	if (bw_avail >= bw_cap && verbose)
 		pci_info(dev, "%u.%03u Gb/s available PCIe bandwidth (%s x%d link)\n",
 			 bw_cap / 1000, bw_cap % 1000,
-			 PCIE_SPEED2STR(speed_cap), width_cap);
+			 pci_speed_string(speed_cap), width_cap);
 	else if (bw_avail < bw_cap)
 		pci_info(dev, "%u.%03u Gb/s available PCIe bandwidth, limited by %s x%d link at %s (capable of %u.%03u Gb/s with %s x%d link)\n",
 			 bw_avail / 1000, bw_avail % 1000,
-			 PCIE_SPEED2STR(speed), width,
+			 pci_speed_string(speed), width,
 			 limiting_dev ? pci_name(limiting_dev) : "<unknown>",
 			 bw_cap / 1000, bw_cap % 1000,
-			 PCIE_SPEED2STR(speed_cap), width_cap);
+			 pci_speed_string(speed_cap), width_cap);
 }
 
 /**
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 6394e77..6d3f758 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -292,22 +292,25 @@ void pci_disable_bridge_window(struct pci_dev *dev);
 struct pci_bus *pci_bus_get(struct pci_bus *bus);
 void pci_bus_put(struct pci_bus *bus);
 
-/* PCIe link information */
-#define PCIE_SPEED2STR(speed) \
-	((speed) == PCIE_SPEED_16_0GT ? "16 GT/s" : \
-	 (speed) == PCIE_SPEED_8_0GT ? "8 GT/s" : \
-	 (speed) == PCIE_SPEED_5_0GT ? "5 GT/s" : \
-	 (speed) == PCIE_SPEED_2_5GT ? "2.5 GT/s" : \
-	 "Unknown speed")
+/* PCIe link information from Link Capabilities 2 */
+#define PCIE_LNKCAP2_SLS2SPEED(lnkcap2) \
+	((lnkcap2) & PCI_EXP_LNKCAP2_SLS_32_0GB ? PCIE_SPEED_32_0GT : \
+	 (lnkcap2) & PCI_EXP_LNKCAP2_SLS_16_0GB ? PCIE_SPEED_16_0GT : \
+	 (lnkcap2) & PCI_EXP_LNKCAP2_SLS_8_0GB ? PCIE_SPEED_8_0GT : \
+	 (lnkcap2) & PCI_EXP_LNKCAP2_SLS_5_0GB ? PCIE_SPEED_5_0GT : \
+	 (lnkcap2) & PCI_EXP_LNKCAP2_SLS_2_5GB ? PCIE_SPEED_2_5GT : \
+	 PCI_SPEED_UNKNOWN)
 
 /* PCIe speed to Mb/s reduced by encoding overhead */
 #define PCIE_SPEED2MBS_ENC(speed) \
-	((speed) == PCIE_SPEED_16_0GT ? 16000*128/130 : \
+	((speed) == PCIE_SPEED_32_0GT ? 32000*128/130 : \
+	 (speed) == PCIE_SPEED_16_0GT ? 16000*128/130 : \
 	 (speed) == PCIE_SPEED_8_0GT  ?  8000*128/130 : \
 	 (speed) == PCIE_SPEED_5_0GT  ?  5000*8/10 : \
 	 (speed) == PCIE_SPEED_2_5GT  ?  2500*8/10 : \
 	 0)
 
+const char *pci_speed_string(enum pci_bus_speed speed);
 enum pci_bus_speed pcie_get_speed_cap(struct pci_dev *dev);
 enum pcie_link_width pcie_get_width_cap(struct pci_dev *dev);
 u32 pcie_bandwidth_capable(struct pci_dev *dev, enum pci_bus_speed *speed,
@@ -448,9 +451,13 @@ void aer_print_error(struct pci_dev *dev, struct aer_err_info *info);
 #ifdef CONFIG_PCIE_DPC
 void pci_save_dpc_state(struct pci_dev *dev);
 void pci_restore_dpc_state(struct pci_dev *dev);
+void pci_dpc_init(struct pci_dev *pdev);
+void dpc_process_error(struct pci_dev *pdev);
+pci_ers_result_t dpc_reset_link(struct pci_dev *pdev);
 #else
 static inline void pci_save_dpc_state(struct pci_dev *dev) {}
 static inline void pci_restore_dpc_state(struct pci_dev *dev) {}
+static inline void pci_dpc_init(struct pci_dev *pdev) {}
 #endif
 
 #ifdef CONFIG_PCI_ATS
@@ -547,8 +554,9 @@ static inline int pci_dev_specific_disable_acs_redir(struct pci_dev *dev)
 #endif
 
 /* PCI error reporting and recovery */
-void pcie_do_recovery(struct pci_dev *dev, enum pci_channel_state state,
-		      u32 service);
+pci_ers_result_t pcie_do_recovery(struct pci_dev *dev,
+			enum pci_channel_state state,
+			pci_ers_result_t (*reset_link)(struct pci_dev *pdev));
 
 bool pcie_wait_for_link(struct pci_dev *pdev, bool active);
 #ifdef CONFIG_PCIEASPM
@@ -651,12 +659,16 @@ void pci_aer_exit(struct pci_dev *dev);
 extern const struct attribute_group aer_stats_attr_group;
 void pci_aer_clear_fatal_status(struct pci_dev *dev);
 void pci_aer_clear_device_status(struct pci_dev *dev);
+int pci_aer_clear_status(struct pci_dev *dev);
+int pci_aer_raw_clear_status(struct pci_dev *dev);
 #else
 static inline void pci_no_aer(void) { }
 static inline void pci_aer_init(struct pci_dev *d) { }
 static inline void pci_aer_exit(struct pci_dev *d) { }
 static inline void pci_aer_clear_fatal_status(struct pci_dev *dev) { }
 static inline void pci_aer_clear_device_status(struct pci_dev *dev) { }
+static inline int pci_aer_clear_status(struct pci_dev *dev) { return -EINVAL; }
+static inline int pci_aer_raw_clear_status(struct pci_dev *dev) { return -EINVAL; }
 #endif
 
 #ifdef CONFIG_ACPI
diff --git a/drivers/pci/pcie/Kconfig b/drivers/pci/pcie/Kconfig
index 7876dc4..6638681 100644
--- a/drivers/pci/pcie/Kconfig
+++ b/drivers/pci/pcie/Kconfig
@@ -141,3 +141,13 @@
 	  This enables PCI Express Bandwidth Change Notification.  If
 	  you know link width or rate changes occur only to correct
 	  unreliable links, you may answer Y.
+
+config PCIE_EDR
+	bool "PCI Express Error Disconnect Recover support"
+	depends on PCIE_DPC && ACPI
+	help
+	  This option adds Error Disconnect Recover support as specified
+	  in the Downstream Port Containment Related Enhancements ECN to
+	  the PCI Firmware Specification r3.2.  Enable this if you want to
+	  support hybrid DPC model which uses both firmware and OS to
+	  implement DPC.
diff --git a/drivers/pci/pcie/Makefile b/drivers/pci/pcie/Makefile
index efb9d2e..68da928 100644
--- a/drivers/pci/pcie/Makefile
+++ b/drivers/pci/pcie/Makefile
@@ -13,3 +13,4 @@
 obj-$(CONFIG_PCIE_DPC)		+= dpc.o
 obj-$(CONFIG_PCIE_PTM)		+= ptm.o
 obj-$(CONFIG_PCIE_BW)		+= bw_notification.o
+obj-$(CONFIG_PCIE_EDR)		+= edr.o
diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
index 4a818b0..f4274d3 100644
--- a/drivers/pci/pcie/aer.c
+++ b/drivers/pci/pcie/aer.c
@@ -102,6 +102,7 @@ struct aer_stats {
 #define ERR_UNCOR_ID(d)			(d >> 16)
 
 static int pcie_aer_disable;
+static pci_ers_result_t aer_root_reset(struct pci_dev *dev);
 
 void pci_no_aer(void)
 {
@@ -376,7 +377,7 @@ void pci_aer_clear_device_status(struct pci_dev *dev)
 	pcie_capability_write_word(dev, PCI_EXP_DEVSTA, sta);
 }
 
-int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev)
+int pci_aer_clear_nonfatal_status(struct pci_dev *dev)
 {
 	int pos;
 	u32 status, sev;
@@ -397,7 +398,7 @@ int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev)
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(pci_cleanup_aer_uncorrect_error_status);
+EXPORT_SYMBOL_GPL(pci_aer_clear_nonfatal_status);
 
 void pci_aer_clear_fatal_status(struct pci_dev *dev)
 {
@@ -419,7 +420,16 @@ void pci_aer_clear_fatal_status(struct pci_dev *dev)
 		pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, status);
 }
 
-int pci_cleanup_aer_error_status_regs(struct pci_dev *dev)
+/**
+ * pci_aer_raw_clear_status - Clear AER error registers.
+ * @dev: the PCI device
+ *
+ * Clearing AER error status registers unconditionally, regardless of
+ * whether they're owned by firmware or the OS.
+ *
+ * Returns 0 on success, or negative on failure.
+ */
+int pci_aer_raw_clear_status(struct pci_dev *dev)
 {
 	int pos;
 	u32 status;
@@ -432,9 +442,6 @@ int pci_cleanup_aer_error_status_regs(struct pci_dev *dev)
 	if (!pos)
 		return -EIO;
 
-	if (pcie_aer_get_firmware_first(dev))
-		return -EIO;
-
 	port_type = pci_pcie_type(dev);
 	if (port_type == PCI_EXP_TYPE_ROOT_PORT) {
 		pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &status);
@@ -450,6 +457,14 @@ int pci_cleanup_aer_error_status_regs(struct pci_dev *dev)
 	return 0;
 }
 
+int pci_aer_clear_status(struct pci_dev *dev)
+{
+	if (pcie_aer_get_firmware_first(dev))
+		return -EIO;
+
+	return pci_aer_raw_clear_status(dev);
+}
+
 void pci_save_aer_state(struct pci_dev *dev)
 {
 	struct pci_cap_saved_state *save_state;
@@ -515,7 +530,7 @@ void pci_aer_init(struct pci_dev *dev)
 	n = pcie_cap_has_rtctl(dev) ? 5 : 4;
 	pci_add_ext_cap_save_buffer(dev, PCI_EXT_CAP_ID_ERR, sizeof(u32) * n);
 
-	pci_cleanup_aer_error_status_regs(dev);
+	pci_aer_clear_status(dev);
 }
 
 void pci_aer_exit(struct pci_dev *dev)
@@ -1053,11 +1068,9 @@ static void handle_error_source(struct pci_dev *dev, struct aer_err_info *info)
 					info->status);
 		pci_aer_clear_device_status(dev);
 	} else if (info->severity == AER_NONFATAL)
-		pcie_do_recovery(dev, pci_channel_io_normal,
-				 PCIE_PORT_SERVICE_AER);
+		pcie_do_recovery(dev, pci_channel_io_normal, aer_root_reset);
 	else if (info->severity == AER_FATAL)
-		pcie_do_recovery(dev, pci_channel_io_frozen,
-				 PCIE_PORT_SERVICE_AER);
+		pcie_do_recovery(dev, pci_channel_io_frozen, aer_root_reset);
 	pci_dev_put(dev);
 }
 
@@ -1094,10 +1107,10 @@ static void aer_recover_work_func(struct work_struct *work)
 		cper_print_aer(pdev, entry.severity, entry.regs);
 		if (entry.severity == AER_NONFATAL)
 			pcie_do_recovery(pdev, pci_channel_io_normal,
-					 PCIE_PORT_SERVICE_AER);
+					 aer_root_reset);
 		else if (entry.severity == AER_FATAL)
 			pcie_do_recovery(pdev, pci_channel_io_frozen,
-					 PCIE_PORT_SERVICE_AER);
+					 aer_root_reset);
 		pci_dev_put(pdev);
 	}
 }
@@ -1501,7 +1514,6 @@ static struct pcie_port_service_driver aerdriver = {
 
 	.probe		= aer_probe,
 	.remove		= aer_remove,
-	.reset_link	= aer_root_reset,
 };
 
 /**
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 0dcd443..2378ed6 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -273,7 +273,7 @@ static void pcie_aspm_configure_common_clock(struct pcie_link_state *link)
 		}
 		if (consistent)
 			return;
-		pci_warn(parent, "ASPM: current common clock configuration is broken, reconfiguring\n");
+		pci_info(parent, "ASPM: current common clock configuration is inconsistent, reconfiguring\n");
 	}
 
 	/* Configure downstream component, all functions */
@@ -747,9 +747,9 @@ static void pcie_config_aspm_l1ss(struct pcie_link_state *link, u32 state)
 
 	/* Enable what we need to enable */
 	pci_clear_and_set_dword(parent, up_cap_ptr + PCI_L1SS_CTL1,
-				PCI_L1SS_CAP_L1_PM_SS, val);
+				PCI_L1SS_CTL1_L1SS_MASK, val);
 	pci_clear_and_set_dword(child, dw_cap_ptr + PCI_L1SS_CTL1,
-				PCI_L1SS_CAP_L1_PM_SS, val);
+				PCI_L1SS_CTL1_L1SS_MASK, val);
 }
 
 static void pcie_config_aspm_dev(struct pci_dev *pdev, u32 val)
diff --git a/drivers/pci/pcie/dpc.c b/drivers/pci/pcie/dpc.c
index e06f42f..7621704 100644
--- a/drivers/pci/pcie/dpc.c
+++ b/drivers/pci/pcie/dpc.c
@@ -17,13 +17,6 @@
 #include "portdrv.h"
 #include "../pci.h"
 
-struct dpc_dev {
-	struct pcie_device	*dev;
-	u16			cap_pos;
-	bool			rp_extensions;
-	u8			rp_log_size;
-};
-
 static const char * const rp_pio_error_string[] = {
 	"Configuration Request received UR Completion",	 /* Bit Position 0  */
 	"Configuration Request received CA Completion",	 /* Bit Position 1  */
@@ -46,63 +39,42 @@ static const char * const rp_pio_error_string[] = {
 	"Memory Request Completion Timeout",		 /* Bit Position 18 */
 };
 
-static struct dpc_dev *to_dpc_dev(struct pci_dev *dev)
-{
-	struct device *device;
-
-	device = pcie_port_find_device(dev, PCIE_PORT_SERVICE_DPC);
-	if (!device)
-		return NULL;
-	return get_service_data(to_pcie_device(device));
-}
-
 void pci_save_dpc_state(struct pci_dev *dev)
 {
-	struct dpc_dev *dpc;
 	struct pci_cap_saved_state *save_state;
 	u16 *cap;
 
 	if (!pci_is_pcie(dev))
 		return;
 
-	dpc = to_dpc_dev(dev);
-	if (!dpc)
-		return;
-
 	save_state = pci_find_saved_ext_cap(dev, PCI_EXT_CAP_ID_DPC);
 	if (!save_state)
 		return;
 
 	cap = (u16 *)&save_state->cap.data[0];
-	pci_read_config_word(dev, dpc->cap_pos + PCI_EXP_DPC_CTL, cap);
+	pci_read_config_word(dev, dev->dpc_cap + PCI_EXP_DPC_CTL, cap);
 }
 
 void pci_restore_dpc_state(struct pci_dev *dev)
 {
-	struct dpc_dev *dpc;
 	struct pci_cap_saved_state *save_state;
 	u16 *cap;
 
 	if (!pci_is_pcie(dev))
 		return;
 
-	dpc = to_dpc_dev(dev);
-	if (!dpc)
-		return;
-
 	save_state = pci_find_saved_ext_cap(dev, PCI_EXT_CAP_ID_DPC);
 	if (!save_state)
 		return;
 
 	cap = (u16 *)&save_state->cap.data[0];
-	pci_write_config_word(dev, dpc->cap_pos + PCI_EXP_DPC_CTL, *cap);
+	pci_write_config_word(dev, dev->dpc_cap + PCI_EXP_DPC_CTL, *cap);
 }
 
-static int dpc_wait_rp_inactive(struct dpc_dev *dpc)
+static int dpc_wait_rp_inactive(struct pci_dev *pdev)
 {
 	unsigned long timeout = jiffies + HZ;
-	struct pci_dev *pdev = dpc->dev->port;
-	u16 cap = dpc->cap_pos, status;
+	u16 cap = pdev->dpc_cap, status;
 
 	pci_read_config_word(pdev, cap + PCI_EXP_DPC_STATUS, &status);
 	while (status & PCI_EXP_DPC_RP_BUSY &&
@@ -117,17 +89,15 @@ static int dpc_wait_rp_inactive(struct dpc_dev *dpc)
 	return 0;
 }
 
-static pci_ers_result_t dpc_reset_link(struct pci_dev *pdev)
+pci_ers_result_t dpc_reset_link(struct pci_dev *pdev)
 {
-	struct dpc_dev *dpc;
 	u16 cap;
 
 	/*
 	 * DPC disables the Link automatically in hardware, so it has
 	 * already been reset by the time we get here.
 	 */
-	dpc = to_dpc_dev(pdev);
-	cap = dpc->cap_pos;
+	cap = pdev->dpc_cap;
 
 	/*
 	 * Wait until the Link is inactive, then clear DPC Trigger Status
@@ -135,7 +105,7 @@ static pci_ers_result_t dpc_reset_link(struct pci_dev *pdev)
 	 */
 	pcie_wait_for_link(pdev, false);
 
-	if (dpc->rp_extensions && dpc_wait_rp_inactive(dpc))
+	if (pdev->dpc_rp_extensions && dpc_wait_rp_inactive(pdev))
 		return PCI_ERS_RESULT_DISCONNECT;
 
 	pci_write_config_word(pdev, cap + PCI_EXP_DPC_STATUS,
@@ -147,10 +117,9 @@ static pci_ers_result_t dpc_reset_link(struct pci_dev *pdev)
 	return PCI_ERS_RESULT_RECOVERED;
 }
 
-static void dpc_process_rp_pio_error(struct dpc_dev *dpc)
+static void dpc_process_rp_pio_error(struct pci_dev *pdev)
 {
-	struct pci_dev *pdev = dpc->dev->port;
-	u16 cap = dpc->cap_pos, dpc_status, first_error;
+	u16 cap = pdev->dpc_cap, dpc_status, first_error;
 	u32 status, mask, sev, syserr, exc, dw0, dw1, dw2, dw3, log, prefix;
 	int i;
 
@@ -175,7 +144,7 @@ static void dpc_process_rp_pio_error(struct dpc_dev *dpc)
 				first_error == i ? " (First)" : "");
 	}
 
-	if (dpc->rp_log_size < 4)
+	if (pdev->dpc_rp_log_size < 4)
 		goto clear_status;
 	pci_read_config_dword(pdev, cap + PCI_EXP_DPC_RP_PIO_HEADER_LOG,
 			      &dw0);
@@ -188,12 +157,12 @@ static void dpc_process_rp_pio_error(struct dpc_dev *dpc)
 	pci_err(pdev, "TLP Header: %#010x %#010x %#010x %#010x\n",
 		dw0, dw1, dw2, dw3);
 
-	if (dpc->rp_log_size < 5)
+	if (pdev->dpc_rp_log_size < 5)
 		goto clear_status;
 	pci_read_config_dword(pdev, cap + PCI_EXP_DPC_RP_PIO_IMPSPEC_LOG, &log);
 	pci_err(pdev, "RP PIO ImpSpec Log %#010x\n", log);
 
-	for (i = 0; i < dpc->rp_log_size - 5; i++) {
+	for (i = 0; i < pdev->dpc_rp_log_size - 5; i++) {
 		pci_read_config_dword(pdev,
 			cap + PCI_EXP_DPC_RP_PIO_TLPPREFIX_LOG, &prefix);
 		pci_err(pdev, "TLP Prefix Header: dw%d, %#010x\n", i, prefix);
@@ -224,12 +193,10 @@ static int dpc_get_aer_uncorrect_severity(struct pci_dev *dev,
 	return 1;
 }
 
-static irqreturn_t dpc_handler(int irq, void *context)
+void dpc_process_error(struct pci_dev *pdev)
 {
+	u16 cap = pdev->dpc_cap, status, source, reason, ext_reason;
 	struct aer_err_info info;
-	struct dpc_dev *dpc = context;
-	struct pci_dev *pdev = dpc->dev->port;
-	u16 cap = dpc->cap_pos, status, source, reason, ext_reason;
 
 	pci_read_config_word(pdev, cap + PCI_EXP_DPC_STATUS, &status);
 	pci_read_config_word(pdev, cap + PCI_EXP_DPC_SOURCE_ID, &source);
@@ -248,27 +215,33 @@ static irqreturn_t dpc_handler(int irq, void *context)
 				     "reserved error");
 
 	/* show RP PIO error detail information */
-	if (dpc->rp_extensions && reason == 3 && ext_reason == 0)
-		dpc_process_rp_pio_error(dpc);
+	if (pdev->dpc_rp_extensions && reason == 3 && ext_reason == 0)
+		dpc_process_rp_pio_error(pdev);
 	else if (reason == 0 &&
 		 dpc_get_aer_uncorrect_severity(pdev, &info) &&
 		 aer_get_device_error_info(pdev, &info)) {
 		aer_print_error(pdev, &info);
-		pci_cleanup_aer_uncorrect_error_status(pdev);
+		pci_aer_clear_nonfatal_status(pdev);
 		pci_aer_clear_fatal_status(pdev);
 	}
+}
+
+static irqreturn_t dpc_handler(int irq, void *context)
+{
+	struct pci_dev *pdev = context;
+
+	dpc_process_error(pdev);
 
 	/* We configure DPC so it only triggers on ERR_FATAL */
-	pcie_do_recovery(pdev, pci_channel_io_frozen, PCIE_PORT_SERVICE_DPC);
+	pcie_do_recovery(pdev, pci_channel_io_frozen, dpc_reset_link);
 
 	return IRQ_HANDLED;
 }
 
 static irqreturn_t dpc_irq(int irq, void *context)
 {
-	struct dpc_dev *dpc = (struct dpc_dev *)context;
-	struct pci_dev *pdev = dpc->dev->port;
-	u16 cap = dpc->cap_pos, status;
+	struct pci_dev *pdev = context;
+	u16 cap = pdev->dpc_cap, status;
 
 	pci_read_config_word(pdev, cap + PCI_EXP_DPC_STATUS, &status);
 
@@ -282,10 +255,30 @@ static irqreturn_t dpc_irq(int irq, void *context)
 	return IRQ_HANDLED;
 }
 
+void pci_dpc_init(struct pci_dev *pdev)
+{
+	u16 cap;
+
+	pdev->dpc_cap = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_DPC);
+	if (!pdev->dpc_cap)
+		return;
+
+	pci_read_config_word(pdev, pdev->dpc_cap + PCI_EXP_DPC_CAP, &cap);
+	if (!(cap & PCI_EXP_DPC_CAP_RP_EXT))
+		return;
+
+	pdev->dpc_rp_extensions = true;
+	pdev->dpc_rp_log_size = (cap & PCI_EXP_DPC_RP_PIO_LOG_SIZE) >> 8;
+	if (pdev->dpc_rp_log_size < 4 || pdev->dpc_rp_log_size > 9) {
+		pci_err(pdev, "RP PIO log size %u is invalid\n",
+			pdev->dpc_rp_log_size);
+		pdev->dpc_rp_log_size = 0;
+	}
+}
+
 #define FLAG(x, y) (((x) & (y)) ? '+' : '-')
 static int dpc_probe(struct pcie_device *dev)
 {
-	struct dpc_dev *dpc;
 	struct pci_dev *pdev = dev->port;
 	struct device *device = &dev->device;
 	int status;
@@ -294,43 +287,25 @@ static int dpc_probe(struct pcie_device *dev)
 	if (pcie_aer_get_firmware_first(pdev) && !pcie_ports_dpc_native)
 		return -ENOTSUPP;
 
-	dpc = devm_kzalloc(device, sizeof(*dpc), GFP_KERNEL);
-	if (!dpc)
-		return -ENOMEM;
-
-	dpc->cap_pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_DPC);
-	dpc->dev = dev;
-	set_service_data(dev, dpc);
-
 	status = devm_request_threaded_irq(device, dev->irq, dpc_irq,
 					   dpc_handler, IRQF_SHARED,
-					   "pcie-dpc", dpc);
+					   "pcie-dpc", pdev);
 	if (status) {
 		pci_warn(pdev, "request IRQ%d failed: %d\n", dev->irq,
 			 status);
 		return status;
 	}
 
-	pci_read_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_CAP, &cap);
-	pci_read_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_CTL, &ctl);
-
-	dpc->rp_extensions = (cap & PCI_EXP_DPC_CAP_RP_EXT);
-	if (dpc->rp_extensions) {
-		dpc->rp_log_size = (cap & PCI_EXP_DPC_RP_PIO_LOG_SIZE) >> 8;
-		if (dpc->rp_log_size < 4 || dpc->rp_log_size > 9) {
-			pci_err(pdev, "RP PIO log size %u is invalid\n",
-				dpc->rp_log_size);
-			dpc->rp_log_size = 0;
-		}
-	}
+	pci_read_config_word(pdev, pdev->dpc_cap + PCI_EXP_DPC_CAP, &cap);
+	pci_read_config_word(pdev, pdev->dpc_cap + PCI_EXP_DPC_CTL, &ctl);
 
 	ctl = (ctl & 0xfff4) | PCI_EXP_DPC_CTL_EN_FATAL | PCI_EXP_DPC_CTL_INT_EN;
-	pci_write_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_CTL, ctl);
+	pci_write_config_word(pdev, pdev->dpc_cap + PCI_EXP_DPC_CTL, ctl);
 
 	pci_info(pdev, "error containment capabilities: Int Msg #%d, RPExt%c PoisonedTLP%c SwTrigger%c RP PIO Log %d, DL_ActiveErr%c\n",
 		 cap & PCI_EXP_DPC_IRQ, FLAG(cap, PCI_EXP_DPC_CAP_RP_EXT),
 		 FLAG(cap, PCI_EXP_DPC_CAP_POISONED_TLP),
-		 FLAG(cap, PCI_EXP_DPC_CAP_SW_TRIGGER), dpc->rp_log_size,
+		 FLAG(cap, PCI_EXP_DPC_CAP_SW_TRIGGER), pdev->dpc_rp_log_size,
 		 FLAG(cap, PCI_EXP_DPC_CAP_DL_ACTIVE));
 
 	pci_add_ext_cap_save_buffer(pdev, PCI_EXT_CAP_ID_DPC, sizeof(u16));
@@ -339,13 +314,12 @@ static int dpc_probe(struct pcie_device *dev)
 
 static void dpc_remove(struct pcie_device *dev)
 {
-	struct dpc_dev *dpc = get_service_data(dev);
 	struct pci_dev *pdev = dev->port;
 	u16 ctl;
 
-	pci_read_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_CTL, &ctl);
+	pci_read_config_word(pdev, pdev->dpc_cap + PCI_EXP_DPC_CTL, &ctl);
 	ctl &= ~(PCI_EXP_DPC_CTL_EN_FATAL | PCI_EXP_DPC_CTL_INT_EN);
-	pci_write_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_CTL, ctl);
+	pci_write_config_word(pdev, pdev->dpc_cap + PCI_EXP_DPC_CTL, ctl);
 }
 
 static struct pcie_port_service_driver dpcdriver = {
@@ -354,7 +328,6 @@ static struct pcie_port_service_driver dpcdriver = {
 	.service	= PCIE_PORT_SERVICE_DPC,
 	.probe		= dpc_probe,
 	.remove		= dpc_remove,
-	.reset_link	= dpc_reset_link,
 };
 
 int __init pcie_dpc_init(void)
diff --git a/drivers/pci/pcie/edr.c b/drivers/pci/pcie/edr.c
new file mode 100644
index 0000000..594622a
--- /dev/null
+++ b/drivers/pci/pcie/edr.c
@@ -0,0 +1,239 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PCI Error Disconnect Recover support
+ * Author: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
+ *
+ * Copyright (C) 2020 Intel Corp.
+ */
+
+#define dev_fmt(fmt) "EDR: " fmt
+
+#include <linux/pci.h>
+#include <linux/pci-acpi.h>
+
+#include "portdrv.h"
+#include "../pci.h"
+
+#define EDR_PORT_DPC_ENABLE_DSM		0x0C
+#define EDR_PORT_LOCATE_DSM		0x0D
+#define EDR_OST_SUCCESS			0x80
+#define EDR_OST_FAILED			0x81
+
+/*
+ * _DSM wrapper function to enable/disable DPC
+ * @pdev   : PCI device structure
+ *
+ * returns 0 on success or errno on failure.
+ */
+static int acpi_enable_dpc(struct pci_dev *pdev)
+{
+	struct acpi_device *adev = ACPI_COMPANION(&pdev->dev);
+	union acpi_object *obj, argv4, req;
+	int status = 0;
+
+	/*
+	 * Behavior when calling unsupported _DSM functions is undefined,
+	 * so check whether EDR_PORT_DPC_ENABLE_DSM is supported.
+	 */
+	if (!acpi_check_dsm(adev->handle, &pci_acpi_dsm_guid, 5,
+			    1ULL << EDR_PORT_DPC_ENABLE_DSM))
+		return 0;
+
+	req.type = ACPI_TYPE_INTEGER;
+	req.integer.value = 1;
+
+	argv4.type = ACPI_TYPE_PACKAGE;
+	argv4.package.count = 1;
+	argv4.package.elements = &req;
+
+	/*
+	 * Per Downstream Port Containment Related Enhancements ECN to PCI
+	 * Firmware Specification r3.2, sec 4.6.12, EDR_PORT_DPC_ENABLE_DSM is
+	 * optional.  Return success if it's not implemented.
+	 */
+	obj = acpi_evaluate_dsm(adev->handle, &pci_acpi_dsm_guid, 5,
+				EDR_PORT_DPC_ENABLE_DSM, &argv4);
+	if (!obj)
+		return 0;
+
+	if (obj->type != ACPI_TYPE_INTEGER) {
+		pci_err(pdev, FW_BUG "Enable DPC _DSM returned non integer\n");
+		status = -EIO;
+	}
+
+	if (obj->integer.value != 1) {
+		pci_err(pdev, "Enable DPC _DSM failed to enable DPC\n");
+		status = -EIO;
+	}
+
+	ACPI_FREE(obj);
+
+	return status;
+}
+
+/*
+ * _DSM wrapper function to locate DPC port
+ * @pdev   : Device which received EDR event
+ *
+ * Returns pci_dev or NULL.  Caller is responsible for dropping a reference
+ * on the returned pci_dev with pci_dev_put().
+ */
+static struct pci_dev *acpi_dpc_port_get(struct pci_dev *pdev)
+{
+	struct acpi_device *adev = ACPI_COMPANION(&pdev->dev);
+	union acpi_object *obj;
+	u16 port;
+
+	/*
+	 * Behavior when calling unsupported _DSM functions is undefined,
+	 * so check whether EDR_PORT_DPC_ENABLE_DSM is supported.
+	 */
+	if (!acpi_check_dsm(adev->handle, &pci_acpi_dsm_guid, 5,
+			    1ULL << EDR_PORT_LOCATE_DSM))
+		return pci_dev_get(pdev);
+
+	obj = acpi_evaluate_dsm(adev->handle, &pci_acpi_dsm_guid, 5,
+				EDR_PORT_LOCATE_DSM, NULL);
+	if (!obj)
+		return pci_dev_get(pdev);
+
+	if (obj->type != ACPI_TYPE_INTEGER) {
+		ACPI_FREE(obj);
+		pci_err(pdev, FW_BUG "Locate Port _DSM returned non integer\n");
+		return NULL;
+	}
+
+	/*
+	 * Firmware returns DPC port BDF details in following format:
+	 *	15:8 = bus
+	 *	 7:3 = device
+	 *	 2:0 = function
+	 */
+	port = obj->integer.value;
+
+	ACPI_FREE(obj);
+
+	return pci_get_domain_bus_and_slot(pci_domain_nr(pdev->bus),
+					   PCI_BUS_NUM(port), port & 0xff);
+}
+
+/*
+ * _OST wrapper function to let firmware know the status of EDR event
+ * @pdev   : Device used to send _OST
+ * @edev   : Device which experienced EDR event
+ * @status : Status of EDR event
+ */
+static int acpi_send_edr_status(struct pci_dev *pdev, struct pci_dev *edev,
+				u16 status)
+{
+	struct acpi_device *adev = ACPI_COMPANION(&pdev->dev);
+	u32 ost_status;
+
+	pci_dbg(pdev, "Status for %s: %#x\n", pci_name(edev), status);
+
+	ost_status = PCI_DEVID(edev->bus->number, edev->devfn) << 16;
+	ost_status |= status;
+
+	status = acpi_evaluate_ost(adev->handle, ACPI_NOTIFY_DISCONNECT_RECOVER,
+				   ost_status, NULL);
+	if (ACPI_FAILURE(status))
+		return -EINVAL;
+
+	return 0;
+}
+
+static void edr_handle_event(acpi_handle handle, u32 event, void *data)
+{
+	struct pci_dev *pdev = data, *edev;
+	pci_ers_result_t estate = PCI_ERS_RESULT_DISCONNECT;
+	u16 status;
+
+	pci_info(pdev, "ACPI event %#x received\n", event);
+
+	if (event != ACPI_NOTIFY_DISCONNECT_RECOVER)
+		return;
+
+	/* Locate the port which issued EDR event */
+	edev = acpi_dpc_port_get(pdev);
+	if (!edev) {
+		pci_err(pdev, "Firmware failed to locate DPC port\n");
+		return;
+	}
+
+	pci_dbg(pdev, "Reported EDR dev: %s\n", pci_name(edev));
+
+	/* If port does not support DPC, just send the OST */
+	if (!edev->dpc_cap) {
+		pci_err(edev, FW_BUG "This device doesn't support DPC\n");
+		goto send_ost;
+	}
+
+	/* Check if there is a valid DPC trigger */
+	pci_read_config_word(edev, edev->dpc_cap + PCI_EXP_DPC_STATUS, &status);
+	if (!(status & PCI_EXP_DPC_STATUS_TRIGGER)) {
+		pci_err(edev, "Invalid DPC trigger %#010x\n", status);
+		goto send_ost;
+	}
+
+	dpc_process_error(edev);
+	pci_aer_raw_clear_status(edev);
+
+	/*
+	 * Irrespective of whether the DPC event is triggered by ERR_FATAL
+	 * or ERR_NONFATAL, since the link is already down, use the FATAL
+	 * error recovery path for both cases.
+	 */
+	estate = pcie_do_recovery(edev, pci_channel_io_frozen, dpc_reset_link);
+
+send_ost:
+
+	/*
+	 * If recovery is successful, send _OST(0xF, BDF << 16 | 0x80)
+	 * to firmware. If not successful, send _OST(0xF, BDF << 16 | 0x81).
+	 */
+	if (estate == PCI_ERS_RESULT_RECOVERED) {
+		pci_dbg(edev, "DPC port successfully recovered\n");
+		acpi_send_edr_status(pdev, edev, EDR_OST_SUCCESS);
+	} else {
+		pci_dbg(edev, "DPC port recovery failed\n");
+		acpi_send_edr_status(pdev, edev, EDR_OST_FAILED);
+	}
+
+	pci_dev_put(edev);
+}
+
+void pci_acpi_add_edr_notifier(struct pci_dev *pdev)
+{
+	struct acpi_device *adev = ACPI_COMPANION(&pdev->dev);
+	acpi_status status;
+
+	if (!adev) {
+		pci_dbg(pdev, "No valid ACPI node, skipping EDR init\n");
+		return;
+	}
+
+	status = acpi_install_notify_handler(adev->handle, ACPI_SYSTEM_NOTIFY,
+					     edr_handle_event, pdev);
+	if (ACPI_FAILURE(status)) {
+		pci_err(pdev, "Failed to install notify handler\n");
+		return;
+	}
+
+	if (acpi_enable_dpc(pdev))
+		acpi_remove_notify_handler(adev->handle, ACPI_SYSTEM_NOTIFY,
+					   edr_handle_event);
+	else
+		pci_dbg(pdev, "Notify handler installed\n");
+}
+
+void pci_acpi_remove_edr_notifier(struct pci_dev *pdev)
+{
+	struct acpi_device *adev = ACPI_COMPANION(&pdev->dev);
+
+	if (!adev)
+		return;
+
+	acpi_remove_notify_handler(adev->handle, ACPI_SYSTEM_NOTIFY,
+				   edr_handle_event);
+	pci_dbg(pdev, "Notify handler removed\n");
+}
diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
index 01dfc8b..14bb8f5 100644
--- a/drivers/pci/pcie/err.c
+++ b/drivers/pci/pcie/err.c
@@ -146,49 +146,9 @@ static int report_resume(struct pci_dev *dev, void *data)
 	return 0;
 }
 
-/**
- * default_reset_link - default reset function
- * @dev: pointer to pci_dev data structure
- *
- * Invoked when performing link reset on a Downstream Port or a
- * Root Port with no aer driver.
- */
-static pci_ers_result_t default_reset_link(struct pci_dev *dev)
-{
-	int rc;
-
-	rc = pci_bus_error_reset(dev);
-	pci_printk(KERN_DEBUG, dev, "downstream link has been reset\n");
-	return rc ? PCI_ERS_RESULT_DISCONNECT : PCI_ERS_RESULT_RECOVERED;
-}
-
-static pci_ers_result_t reset_link(struct pci_dev *dev, u32 service)
-{
-	pci_ers_result_t status;
-	struct pcie_port_service_driver *driver = NULL;
-
-	driver = pcie_port_find_service(dev, service);
-	if (driver && driver->reset_link) {
-		status = driver->reset_link(dev);
-	} else if (pcie_downstream_port(dev)) {
-		status = default_reset_link(dev);
-	} else {
-		pci_printk(KERN_DEBUG, dev, "no link-reset support at upstream device %s\n",
-			pci_name(dev));
-		return PCI_ERS_RESULT_DISCONNECT;
-	}
-
-	if (status != PCI_ERS_RESULT_RECOVERED) {
-		pci_printk(KERN_DEBUG, dev, "link reset at upstream device %s failed\n",
-			pci_name(dev));
-		return PCI_ERS_RESULT_DISCONNECT;
-	}
-
-	return status;
-}
-
-void pcie_do_recovery(struct pci_dev *dev, enum pci_channel_state state,
-		      u32 service)
+pci_ers_result_t pcie_do_recovery(struct pci_dev *dev,
+			enum pci_channel_state state,
+			pci_ers_result_t (*reset_link)(struct pci_dev *pdev))
 {
 	pci_ers_result_t status = PCI_ERS_RESULT_CAN_RECOVER;
 	struct pci_bus *bus;
@@ -203,14 +163,16 @@ void pcie_do_recovery(struct pci_dev *dev, enum pci_channel_state state,
 	bus = dev->subordinate;
 
 	pci_dbg(dev, "broadcast error_detected message\n");
-	if (state == pci_channel_io_frozen)
+	if (state == pci_channel_io_frozen) {
 		pci_walk_bus(bus, report_frozen_detected, &status);
-	else
+		status = reset_link(dev);
+		if (status != PCI_ERS_RESULT_RECOVERED) {
+			pci_warn(dev, "link reset failed\n");
+			goto failed;
+		}
+	} else {
 		pci_walk_bus(bus, report_normal_detected, &status);
-
-	if (state == pci_channel_io_frozen &&
-	    reset_link(dev, service) != PCI_ERS_RESULT_RECOVERED)
-		goto failed;
+	}
 
 	if (status == PCI_ERS_RESULT_CAN_RECOVER) {
 		status = PCI_ERS_RESULT_RECOVERED;
@@ -236,13 +198,15 @@ void pcie_do_recovery(struct pci_dev *dev, enum pci_channel_state state,
 	pci_walk_bus(bus, report_resume, &status);
 
 	pci_aer_clear_device_status(dev);
-	pci_cleanup_aer_uncorrect_error_status(dev);
+	pci_aer_clear_nonfatal_status(dev);
 	pci_info(dev, "device recovery successful\n");
-	return;
+	return status;
 
 failed:
 	pci_uevent_ers(dev, PCI_ERS_RESULT_DISCONNECT);
 
 	/* TODO: Should kernel panic here? */
 	pci_info(dev, "device recovery failed\n");
+
+	return status;
 }
diff --git a/drivers/pci/pcie/portdrv.h b/drivers/pci/pcie/portdrv.h
index 1e67361..64b5e08 100644
--- a/drivers/pci/pcie/portdrv.h
+++ b/drivers/pci/pcie/portdrv.h
@@ -92,9 +92,6 @@ struct pcie_port_service_driver {
 	/* Device driver may resume normal operations */
 	void (*error_resume)(struct pci_dev *dev);
 
-	/* Link Reset Capability - AER service driver specific */
-	pci_ers_result_t (*reset_link)(struct pci_dev *dev);
-
 	int port_type;  /* Type of the port this driver can handle */
 	u32 service;    /* Port service this device represents */
 
@@ -161,7 +158,5 @@ static inline int pcie_aer_get_firmware_first(struct pci_dev *pci_dev)
 }
 #endif
 
-struct pcie_port_service_driver *pcie_port_find_service(struct pci_dev *dev,
-							u32 service);
 struct device *pcie_port_find_device(struct pci_dev *dev, u32 service);
 #endif /* _PORTDRV_H_ */
diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
index 5075cb9..50a9522 100644
--- a/drivers/pci/pcie/portdrv_core.c
+++ b/drivers/pci/pcie/portdrv_core.c
@@ -459,27 +459,6 @@ static int find_service_iter(struct device *device, void *data)
 }
 
 /**
- * pcie_port_find_service - find the service driver
- * @dev: PCI Express port the service is associated with
- * @service: Service to find
- *
- * Find PCI Express port service driver associated with given service
- */
-struct pcie_port_service_driver *pcie_port_find_service(struct pci_dev *dev,
-							u32 service)
-{
-	struct pcie_port_service_driver *drv;
-	struct portdrv_service_data pdrvs;
-
-	pdrvs.drv = NULL;
-	pdrvs.service = service;
-	device_for_each_child(&dev->dev, &pdrvs, find_service_iter);
-
-	drv = pdrvs.drv;
-	return drv;
-}
-
-/**
  * pcie_port_find_device - find the struct device
  * @dev: PCI Express port the service is associated with
  * @service: For the service to find
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 512cb43..77b8a14 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -598,6 +598,7 @@ static void pci_init_host_bridge(struct pci_host_bridge *bridge)
 	bridge->native_shpc_hotplug = 1;
 	bridge->native_pme = 1;
 	bridge->native_ltr = 1;
+	bridge->native_dpc = 1;
 }
 
 struct pci_host_bridge *pci_alloc_host_bridge(size_t priv)
@@ -640,6 +641,7 @@ void pci_free_host_bridge(struct pci_host_bridge *bridge)
 }
 EXPORT_SYMBOL(pci_free_host_bridge);
 
+/* Indexed by PCI_X_SSTATUS_FREQ (secondary bus mode and frequency) */
 static const unsigned char pcix_bus_speed[] = {
 	PCI_SPEED_UNKNOWN,		/* 0 */
 	PCI_SPEED_66MHz_PCIX,		/* 1 */
@@ -659,6 +661,7 @@ static const unsigned char pcix_bus_speed[] = {
 	PCI_SPEED_133MHz_PCIX_533	/* F */
 };
 
+/* Indexed by PCI_EXP_LNKCAP_SLS, PCI_EXP_LNKSTA_CLS */
 const unsigned char pcie_link_speed[] = {
 	PCI_SPEED_UNKNOWN,		/* 0 */
 	PCIE_SPEED_2_5GT,		/* 1 */
@@ -677,6 +680,44 @@ const unsigned char pcie_link_speed[] = {
 	PCI_SPEED_UNKNOWN,		/* E */
 	PCI_SPEED_UNKNOWN		/* F */
 };
+EXPORT_SYMBOL_GPL(pcie_link_speed);
+
+const char *pci_speed_string(enum pci_bus_speed speed)
+{
+	/* Indexed by the pci_bus_speed enum */
+	static const char *speed_strings[] = {
+	    "33 MHz PCI",		/* 0x00 */
+	    "66 MHz PCI",		/* 0x01 */
+	    "66 MHz PCI-X",		/* 0x02 */
+	    "100 MHz PCI-X",		/* 0x03 */
+	    "133 MHz PCI-X",		/* 0x04 */
+	    NULL,			/* 0x05 */
+	    NULL,			/* 0x06 */
+	    NULL,			/* 0x07 */
+	    NULL,			/* 0x08 */
+	    "66 MHz PCI-X 266",		/* 0x09 */
+	    "100 MHz PCI-X 266",	/* 0x0a */
+	    "133 MHz PCI-X 266",	/* 0x0b */
+	    "Unknown AGP",		/* 0x0c */
+	    "1x AGP",			/* 0x0d */
+	    "2x AGP",			/* 0x0e */
+	    "4x AGP",			/* 0x0f */
+	    "8x AGP",			/* 0x10 */
+	    "66 MHz PCI-X 533",		/* 0x11 */
+	    "100 MHz PCI-X 533",	/* 0x12 */
+	    "133 MHz PCI-X 533",	/* 0x13 */
+	    "2.5 GT/s PCIe",		/* 0x14 */
+	    "5.0 GT/s PCIe",		/* 0x15 */
+	    "8.0 GT/s PCIe",		/* 0x16 */
+	    "16.0 GT/s PCIe",		/* 0x17 */
+	    "32.0 GT/s PCIe",		/* 0x18 */
+	};
+
+	if (speed < ARRAY_SIZE(speed_strings))
+		return speed_strings[speed];
+	return "Unknown";
+}
+EXPORT_SYMBOL_GPL(pci_speed_string);
 
 void pcie_update_link_speed(struct pci_bus *bus, u16 linksta)
 {
@@ -2329,6 +2370,7 @@ static void pci_init_capabilities(struct pci_dev *dev)
 	pci_enable_acs(dev);		/* Enable ACS P2P upstream forwarding */
 	pci_ptm_init(dev);		/* Precision Time Measurement */
 	pci_aer_init(dev);		/* Advanced Error Reporting */
+	pci_dpc_init(dev);		/* Downstream Port Containment */
 
 	pcie_report_downtraining(dev);
 
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 29f473e..28c9a24 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1970,26 +1970,92 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_80332_1,	quirk
 /*
  * IO-APIC1 on 6300ESB generates boot interrupts, see Intel order no
  * 300641-004US, section 5.7.3.
+ *
+ * Core IO on Xeon E5 1600/2600/4600, see Intel order no 326509-003.
+ * Core IO on Xeon E5 v2, see Intel order no 329188-003.
+ * Core IO on Xeon E7 v2, see Intel order no 329595-002.
+ * Core IO on Xeon E5 v3, see Intel order no 330784-003.
+ * Core IO on Xeon E7 v3, see Intel order no 332315-001US.
+ * Core IO on Xeon E5 v4, see Intel order no 333810-002US.
+ * Core IO on Xeon E7 v4, see Intel order no 332315-001US.
+ * Core IO on Xeon D-1500, see Intel order no 332051-001.
+ * Core IO on Xeon Scalable, see Intel order no 610950.
  */
-#define INTEL_6300_IOAPIC_ABAR		0x40
+#define INTEL_6300_IOAPIC_ABAR		0x40	/* Bus 0, Dev 29, Func 5 */
 #define INTEL_6300_DISABLE_BOOT_IRQ	(1<<14)
 
+#define INTEL_CIPINTRC_CFG_OFFSET	0x14C	/* Bus 0, Dev 5, Func 0 */
+#define INTEL_CIPINTRC_DIS_INTX_ICH	(1<<25)
+
 static void quirk_disable_intel_boot_interrupt(struct pci_dev *dev)
 {
 	u16 pci_config_word;
+	u32 pci_config_dword;
 
 	if (noioapicquirk)
 		return;
 
-	pci_read_config_word(dev, INTEL_6300_IOAPIC_ABAR, &pci_config_word);
-	pci_config_word |= INTEL_6300_DISABLE_BOOT_IRQ;
-	pci_write_config_word(dev, INTEL_6300_IOAPIC_ABAR, pci_config_word);
-
+	switch (dev->device) {
+	case PCI_DEVICE_ID_INTEL_ESB_10:
+		pci_read_config_word(dev, INTEL_6300_IOAPIC_ABAR,
+				     &pci_config_word);
+		pci_config_word |= INTEL_6300_DISABLE_BOOT_IRQ;
+		pci_write_config_word(dev, INTEL_6300_IOAPIC_ABAR,
+				      pci_config_word);
+		break;
+	case 0x3c28:	/* Xeon E5 1600/2600/4600	*/
+	case 0x0e28:	/* Xeon E5/E7 V2		*/
+	case 0x2f28:	/* Xeon E5/E7 V3,V4		*/
+	case 0x6f28:	/* Xeon D-1500			*/
+	case 0x2034:	/* Xeon Scalable Family		*/
+		pci_read_config_dword(dev, INTEL_CIPINTRC_CFG_OFFSET,
+				      &pci_config_dword);
+		pci_config_dword |= INTEL_CIPINTRC_DIS_INTX_ICH;
+		pci_write_config_dword(dev, INTEL_CIPINTRC_CFG_OFFSET,
+				       pci_config_dword);
+		break;
+	default:
+		return;
+	}
 	pci_info(dev, "disabled boot interrupts on device [%04x:%04x]\n",
 		 dev->vendor, dev->device);
 }
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,   PCI_DEVICE_ID_INTEL_ESB_10,	quirk_disable_intel_boot_interrupt);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL,   PCI_DEVICE_ID_INTEL_ESB_10,	quirk_disable_intel_boot_interrupt);
+/*
+ * Device 29 Func 5 Device IDs of IO-APIC
+ * containing ABAR—APIC1 Alternate Base Address Register
+ */
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_ESB_10,
+		quirk_disable_intel_boot_interrupt);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_ESB_10,
+		quirk_disable_intel_boot_interrupt);
+
+/*
+ * Device 5 Func 0 Device IDs of Core IO modules/hubs
+ * containing Coherent Interface Protocol Interrupt Control
+ *
+ * Device IDs obtained from volume 2 datasheets of commented
+ * families above.
+ */
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x3c28,
+		quirk_disable_intel_boot_interrupt);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x0e28,
+		quirk_disable_intel_boot_interrupt);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x2f28,
+		quirk_disable_intel_boot_interrupt);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x6f28,
+		quirk_disable_intel_boot_interrupt);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x2034,
+		quirk_disable_intel_boot_interrupt);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL,	0x3c28,
+		quirk_disable_intel_boot_interrupt);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL,	0x0e28,
+		quirk_disable_intel_boot_interrupt);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL,	0x2f28,
+		quirk_disable_intel_boot_interrupt);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL,	0x6f28,
+		quirk_disable_intel_boot_interrupt);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL,	0x2034,
+		quirk_disable_intel_boot_interrupt);
 
 /* Disable boot interrupts on HT-1000 */
 #define BC_HT1000_FEATURE_REG		0x64
@@ -4400,6 +4466,29 @@ static int pci_quirk_xgene_acs(struct pci_dev *dev, u16 acs_flags)
 }
 
 /*
+ * Many Zhaoxin Root Ports and Switch Downstream Ports have no ACS capability.
+ * But the implementation could block peer-to-peer transactions between them
+ * and provide ACS-like functionality.
+ */
+static int  pci_quirk_zhaoxin_pcie_ports_acs(struct pci_dev *dev, u16 acs_flags)
+{
+	if (!pci_is_pcie(dev) ||
+	    ((pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT) &&
+	     (pci_pcie_type(dev) != PCI_EXP_TYPE_DOWNSTREAM)))
+		return -ENOTTY;
+
+	switch (dev->device) {
+	case 0x0710 ... 0x071e:
+	case 0x0721:
+	case 0x0723 ... 0x0732:
+		return pci_acs_ctrl_enabled(acs_flags,
+			PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF);
+	}
+
+	return false;
+}
+
+/*
  * Many Intel PCH Root Ports do provide ACS-like features to disable peer
  * transactions and validate bus numbers in requests, but do not provide an
  * actual PCIe ACS capability.  This is the list of device IDs known to fall
@@ -4701,6 +4790,12 @@ static const struct pci_dev_acs_enabled {
 	{ PCI_VENDOR_ID_BROADCOM, 0xD714, pci_quirk_brcm_acs },
 	/* Amazon Annapurna Labs */
 	{ PCI_VENDOR_ID_AMAZON_ANNAPURNA_LABS, 0x0031, pci_quirk_al_acs },
+	/* Zhaoxin multi-function devices */
+	{ PCI_VENDOR_ID_ZHAOXIN, 0x3038, pci_quirk_mf_endpoint_acs },
+	{ PCI_VENDOR_ID_ZHAOXIN, 0x3104, pci_quirk_mf_endpoint_acs },
+	{ PCI_VENDOR_ID_ZHAOXIN, 0x9083, pci_quirk_mf_endpoint_acs },
+	/* Zhaoxin Root/Downstream Ports */
+	{ PCI_VENDOR_ID_ZHAOXIN, PCI_ANY_ID, pci_quirk_zhaoxin_pcie_ports_acs },
 	{ 0 }
 };
 
@@ -5461,3 +5556,14 @@ static void quirk_reset_lenovo_thinkpad_p50_nvgpu(struct pci_dev *pdev)
 DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_NVIDIA, 0x13b1,
 			      PCI_CLASS_DISPLAY_VGA, 8,
 			      quirk_reset_lenovo_thinkpad_p50_nvgpu);
+
+/*
+ * Device [1b21:2142]
+ * When in D0, PME# doesn't get asserted when plugging USB 3.0 device.
+ */
+static void pci_fixup_no_d0_pme(struct pci_dev *dev)
+{
+	pci_info(dev, "PME# does not work under D0, disabling it\n");
+	dev->pme_support &= ~(PCI_PM_CAP_PME_D0 >> PCI_PM_CAP_PME_SHIFT);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ASMEDIA, 0x2142, pci_fixup_no_d0_pme);
diff --git a/drivers/pci/rom.c b/drivers/pci/rom.c
index 137bf0c..8fc9a4e9 100644
--- a/drivers/pci/rom.c
+++ b/drivers/pci/rom.c
@@ -195,20 +195,3 @@ void pci_unmap_rom(struct pci_dev *pdev, void __iomem *rom)
 		pci_disable_rom(pdev);
 }
 EXPORT_SYMBOL(pci_unmap_rom);
-
-/**
- * pci_platform_rom - provides a pointer to any ROM image provided by the
- * platform
- * @pdev: pointer to pci device struct
- * @size: pointer to receive size of pci window over ROM
- */
-void __iomem *pci_platform_rom(struct pci_dev *pdev, size_t *size)
-{
-	if (pdev->rom && pdev->romlen) {
-		*size = pdev->romlen;
-		return phys_to_virt((phys_addr_t)pdev->rom);
-	}
-
-	return NULL;
-}
-EXPORT_SYMBOL(pci_platform_rom);
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index f2461bf..bbcef1a 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -846,7 +846,7 @@ static resource_size_t window_alignment(struct pci_bus *bus, unsigned long type)
 		 * Per spec, I/O windows are 4K-aligned, but some bridges have
 		 * an extension to support 1K alignment.
 		 */
-		if (bus->self->io_window_1k)
+		if (bus->self && bus->self->io_window_1k)
 			align = PCI_P2P_DEFAULT_IO_ALIGN_1K;
 		else
 			align = PCI_P2P_DEFAULT_IO_ALIGN;
@@ -920,7 +920,7 @@ static void pbus_size_io(struct pci_bus *bus, resource_size_t min_size,
 		calculate_iosize(size, min_size, size1, add_size, children_add_size,
 			resource_size(b_res), min_align);
 	if (!size0 && !size1) {
-		if (b_res->start || b_res->end)
+		if (bus->self && (b_res->start || b_res->end))
 			pci_info(bus->self, "disabling bridge window %pR to %pR (unused)\n",
 				 b_res, &bus->busn_res);
 		b_res->flags = 0;
@@ -930,7 +930,7 @@ static void pbus_size_io(struct pci_bus *bus, resource_size_t min_size,
 	b_res->start = min_align;
 	b_res->end = b_res->start + size0 - 1;
 	b_res->flags |= IORESOURCE_STARTALIGN;
-	if (size1 > size0 && realloc_head) {
+	if (bus->self && size1 > size0 && realloc_head) {
 		add_to_list(realloc_head, bus->self, b_res, size1-size0,
 			    min_align);
 		pci_info(bus->self, "bridge window %pR to %pR add_size %llx\n",
@@ -1073,7 +1073,7 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
 		calculate_memsize(size, min_size, add_size, children_add_size,
 				resource_size(b_res), add_align);
 	if (!size0 && !size1) {
-		if (b_res->start || b_res->end)
+		if (bus->self && (b_res->start || b_res->end))
 			pci_info(bus->self, "disabling bridge window %pR to %pR (unused)\n",
 				 b_res, &bus->busn_res);
 		b_res->flags = 0;
@@ -1082,7 +1082,7 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
 	b_res->start = min_align;
 	b_res->end = size0 + min_align - 1;
 	b_res->flags |= IORESOURCE_STARTALIGN;
-	if (size1 > size0 && realloc_head) {
+	if (bus->self && size1 > size0 && realloc_head) {
 		add_to_list(realloc_head, bus->self, b_res, size1-size0, add_align);
 		pci_info(bus->self, "bridge window %pR to %pR add_size %llx add_align %llx\n",
 			   b_res, &bus->busn_res,
@@ -1196,8 +1196,9 @@ void __pci_bus_size_bridges(struct pci_bus *bus, struct list_head *realloc_head)
 	unsigned long mask, prefmask, type2 = 0, type3 = 0;
 	resource_size_t additional_io_size = 0, additional_mmio_size = 0,
 			additional_mmio_pref_size = 0;
-	struct resource *b_res;
-	int ret;
+	struct resource *pref;
+	struct pci_host_bridge *host;
+	int hdr_type, i, ret;
 
 	list_for_each_entry(dev, &bus->devices, bus_list) {
 		struct pci_bus *b = dev->subordinate;
@@ -1217,10 +1218,20 @@ void __pci_bus_size_bridges(struct pci_bus *bus, struct list_head *realloc_head)
 	}
 
 	/* The root bus? */
-	if (pci_is_root_bus(bus))
-		return;
+	if (pci_is_root_bus(bus)) {
+		host = to_pci_host_bridge(bus->bridge);
+		if (!host->size_windows)
+			return;
+		pci_bus_for_each_resource(bus, pref, i)
+			if (pref && (pref->flags & IORESOURCE_PREFETCH))
+				break;
+		hdr_type = -1;	/* Intentionally invalid - not a PCI device. */
+	} else {
+		pref = &bus->self->resource[PCI_BRIDGE_RESOURCES + 2];
+		hdr_type = bus->self->hdr_type;
+	}
 
-	switch (bus->self->hdr_type) {
+	switch (hdr_type) {
 	case PCI_HEADER_TYPE_CARDBUS:
 		/* Don't size CardBuses yet */
 		break;
@@ -1242,10 +1253,9 @@ void __pci_bus_size_bridges(struct pci_bus *bus, struct list_head *realloc_head)
 		 * the size required to put all 64-bit prefetchable
 		 * resources in it.
 		 */
-		b_res = &bus->self->resource[PCI_BRIDGE_RESOURCES];
 		mask = IORESOURCE_MEM;
 		prefmask = IORESOURCE_MEM | IORESOURCE_PREFETCH;
-		if (b_res[2].flags & IORESOURCE_MEM_64) {
+		if (pref && (pref->flags & IORESOURCE_MEM_64)) {
 			prefmask |= IORESOURCE_MEM_64;
 			ret = pbus_size_mem(bus, prefmask, prefmask,
 				prefmask, prefmask,
diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c
index ae4aa0e..cc386ef 100644
--- a/drivers/pci/slot.c
+++ b/drivers/pci/slot.c
@@ -49,45 +49,9 @@ static ssize_t address_read_file(struct pci_slot *slot, char *buf)
 				slot->number);
 }
 
-/* these strings match up with the values in pci_bus_speed */
-static const char *pci_bus_speed_strings[] = {
-	"33 MHz PCI",		/* 0x00 */
-	"66 MHz PCI",		/* 0x01 */
-	"66 MHz PCI-X",		/* 0x02 */
-	"100 MHz PCI-X",	/* 0x03 */
-	"133 MHz PCI-X",	/* 0x04 */
-	NULL,			/* 0x05 */
-	NULL,			/* 0x06 */
-	NULL,			/* 0x07 */
-	NULL,			/* 0x08 */
-	"66 MHz PCI-X 266",	/* 0x09 */
-	"100 MHz PCI-X 266",	/* 0x0a */
-	"133 MHz PCI-X 266",	/* 0x0b */
-	"Unknown AGP",		/* 0x0c */
-	"1x AGP",		/* 0x0d */
-	"2x AGP",		/* 0x0e */
-	"4x AGP",		/* 0x0f */
-	"8x AGP",		/* 0x10 */
-	"66 MHz PCI-X 533",	/* 0x11 */
-	"100 MHz PCI-X 533",	/* 0x12 */
-	"133 MHz PCI-X 533",	/* 0x13 */
-	"2.5 GT/s PCIe",	/* 0x14 */
-	"5.0 GT/s PCIe",	/* 0x15 */
-	"8.0 GT/s PCIe",	/* 0x16 */
-	"16.0 GT/s PCIe",	/* 0x17 */
-	"32.0 GT/s PCIe",	/* 0x18 */
-};
-
 static ssize_t bus_speed_read(enum pci_bus_speed speed, char *buf)
 {
-	const char *speed_string;
-
-	if (speed < ARRAY_SIZE(pci_bus_speed_strings))
-		speed_string = pci_bus_speed_strings[speed];
-	else
-		speed_string = "Unknown";
-
-	return sprintf(buf, "%s\n", speed_string);
+	return sprintf(buf, "%s\n", pci_speed_string(speed));
 }
 
 static ssize_t max_speed_read_file(struct pci_slot *slot, char *buf)
diff --git a/drivers/pcmcia/cs_internal.h b/drivers/pcmcia/cs_internal.h
index 33c9b6e..fb9b17f 100644
--- a/drivers/pcmcia/cs_internal.h
+++ b/drivers/pcmcia/cs_internal.h
@@ -40,7 +40,7 @@ struct cis_cache_entry {
 	unsigned int		addr;
 	unsigned int		len;
 	unsigned int		attr;
-	unsigned char		cache[0];
+	unsigned char		cache[];
 };
 
 struct pccard_resource_ops {
diff --git a/drivers/pcmcia/omap_cf.c b/drivers/pcmcia/omap_cf.c
index 0a04eb0..d3ef5534 100644
--- a/drivers/pcmcia/omap_cf.c
+++ b/drivers/pcmcia/omap_cf.c
@@ -329,7 +329,7 @@ static int __exit omap_cf_remove(struct platform_device *pdev)
 
 static struct platform_driver omap_cf_driver = {
 	.driver = {
-		.name	= (char *) driver_name,
+		.name	= driver_name,
 	},
 	.remove		= __exit_p(omap_cf_remove),
 };
diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c
index 9e6922c..3b05760 100644
--- a/drivers/pcmcia/rsrc_nonstatic.c
+++ b/drivers/pcmcia/rsrc_nonstatic.c
@@ -1076,7 +1076,7 @@ static ssize_t show_io_db(struct device *dev,
 	for (p = data->io_db.next; p != &data->io_db; p = p->next) {
 		if (ret > (PAGE_SIZE - 10))
 			continue;
-		ret += snprintf(&buf[ret], (PAGE_SIZE - ret - 1),
+		ret += scnprintf(&buf[ret], (PAGE_SIZE - ret - 1),
 				"0x%08lx - 0x%08lx\n",
 				((unsigned long) p->base),
 				((unsigned long) p->base + p->num - 1));
@@ -1133,7 +1133,7 @@ static ssize_t show_mem_db(struct device *dev,
 	     p = p->next) {
 		if (ret > (PAGE_SIZE - 10))
 			continue;
-		ret += snprintf(&buf[ret], (PAGE_SIZE - ret - 1),
+		ret += scnprintf(&buf[ret], (PAGE_SIZE - ret - 1),
 				"0x%08lx - 0x%08lx\n",
 				((unsigned long) p->base),
 				((unsigned long) p->base + p->num - 1));
@@ -1142,7 +1142,7 @@ static ssize_t show_mem_db(struct device *dev,
 	for (p = data->mem_db.next; p != &data->mem_db; p = p->next) {
 		if (ret > (PAGE_SIZE - 10))
 			continue;
-		ret += snprintf(&buf[ret], (PAGE_SIZE - ret - 1),
+		ret += scnprintf(&buf[ret], (PAGE_SIZE - ret - 1),
 				"0x%08lx - 0x%08lx\n",
 				((unsigned long) p->base),
 				((unsigned long) p->base + p->num - 1));
diff --git a/drivers/pcmcia/sa1100_simpad.c b/drivers/pcmcia/sa1100_simpad.c
index e2e8729..784ada5 100644
--- a/drivers/pcmcia/sa1100_simpad.c
+++ b/drivers/pcmcia/sa1100_simpad.c
@@ -14,7 +14,7 @@
 #include <asm/mach-types.h>
 #include <mach/simpad.h>
 #include "sa1100_generic.h"
- 
+
 static int simpad_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
 {
 
@@ -66,7 +66,7 @@ simpad_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
 		simpad_clear_cs3_bit(VCC_3V_EN|VCC_5V_EN|EN0|EN1);
 		break;
 
-	case 33:  
+	case 33:
 		simpad_clear_cs3_bit(VCC_3V_EN|EN1);
 		simpad_set_cs3_bit(VCC_5V_EN|EN0);
 		break;
@@ -95,7 +95,7 @@ static void simpad_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
 	simpad_set_cs3_bit(PCMCIA_RESET);
 }
 
-static struct pcmcia_low_level simpad_pcmcia_ops = { 
+static struct pcmcia_low_level simpad_pcmcia_ops = {
 	.owner			= THIS_MODULE,
 	.hw_init		= simpad_pcmcia_hw_init,
 	.hw_shutdown		= simpad_pcmcia_hw_shutdown,
diff --git a/drivers/pcmcia/soc_common.h b/drivers/pcmcia/soc_common.h
index b7f993f..222e81c 100644
--- a/drivers/pcmcia/soc_common.h
+++ b/drivers/pcmcia/soc_common.h
@@ -88,7 +88,7 @@ struct soc_pcmcia_socket {
 
 struct skt_dev_info {
 	int nskt;
-	struct soc_pcmcia_socket skt[0];
+	struct soc_pcmcia_socket skt[];
 };
 
 struct pcmcia_state {
diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
index 49b1c6a..bf6529b 100644
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -180,12 +180,12 @@ static ssize_t show_yenta_registers(struct device *yentadev, struct device_attri
 	for (i = 0; i < 0x24; i += 4) {
 		unsigned val;
 		if (!(i & 15))
-			offset += snprintf(buf + offset, PAGE_SIZE - offset, "\n%02x:", i);
+			offset += scnprintf(buf + offset, PAGE_SIZE - offset, "\n%02x:", i);
 		val = cb_readl(socket, i);
-		offset += snprintf(buf + offset, PAGE_SIZE - offset, " %08x", val);
+		offset += scnprintf(buf + offset, PAGE_SIZE - offset, " %08x", val);
 	}
 
-	offset += snprintf(buf + offset, PAGE_SIZE - offset, "\n\nExCA registers:");
+	offset += scnprintf(buf + offset, PAGE_SIZE - offset, "\n\nExCA registers:");
 	for (i = 0; i < 0x45; i++) {
 		unsigned char val;
 		if (!(i & 7)) {
@@ -193,10 +193,10 @@ static ssize_t show_yenta_registers(struct device *yentadev, struct device_attri
 				memcpy(buf + offset, " -", 2);
 				offset += 2;
 			} else
-				offset += snprintf(buf + offset, PAGE_SIZE - offset, "\n%02x:", i);
+				offset += scnprintf(buf + offset, PAGE_SIZE - offset, "\n%02x:", i);
 		}
 		val = exca_readb(socket, i);
-		offset += snprintf(buf + offset, PAGE_SIZE - offset, " %02x", val);
+		offset += scnprintf(buf + offset, PAGE_SIZE - offset, " %02x", val);
 	}
 	buf[offset++] = '\n';
 	return offset;
diff --git a/drivers/phy/amlogic/Kconfig b/drivers/phy/amlogic/Kconfig
index af774ac..71801e3 100644
--- a/drivers/phy/amlogic/Kconfig
+++ b/drivers/phy/amlogic/Kconfig
@@ -59,3 +59,25 @@
 	  Enable this to support the Meson USB3 + PCIE Combo PHY found
 	  in Meson G12A SoCs.
 	  If unsure, say N.
+
+config PHY_MESON_AXG_PCIE
+	tristate "Meson AXG PCIE PHY driver"
+	default ARCH_MESON
+	depends on OF && (ARCH_MESON || COMPILE_TEST)
+	select GENERIC_PHY
+	select REGMAP_MMIO
+	help
+	  Enable this to support the Meson MIPI + PCIE PHY found
+	  in Meson AXG SoCs.
+	  If unsure, say N.
+
+config PHY_MESON_AXG_MIPI_PCIE_ANALOG
+	tristate "Meson AXG MIPI + PCIE analog PHY driver"
+	default ARCH_MESON
+	depends on OF && (ARCH_MESON || COMPILE_TEST)
+	select GENERIC_PHY
+	select REGMAP_MMIO
+	help
+	  Enable this to support the Meson MIPI + PCIE analog PHY
+	  found in Meson AXG SoCs.
+	  If unsure, say N.
diff --git a/drivers/phy/amlogic/Makefile b/drivers/phy/amlogic/Makefile
index 11d1c42..e2baa13 100644
--- a/drivers/phy/amlogic/Makefile
+++ b/drivers/phy/amlogic/Makefile
@@ -1,6 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_PHY_MESON8B_USB2)		+= phy-meson8b-usb2.o
-obj-$(CONFIG_PHY_MESON_GXL_USB2)	+= phy-meson-gxl-usb2.o
-obj-$(CONFIG_PHY_MESON_G12A_USB2)	+= phy-meson-g12a-usb2.o
-obj-$(CONFIG_PHY_MESON_GXL_USB3)	+= phy-meson-gxl-usb3.o
-obj-$(CONFIG_PHY_MESON_G12A_USB3_PCIE)	+= phy-meson-g12a-usb3-pcie.o
+obj-$(CONFIG_PHY_MESON8B_USB2)			+= phy-meson8b-usb2.o
+obj-$(CONFIG_PHY_MESON_GXL_USB2)		+= phy-meson-gxl-usb2.o
+obj-$(CONFIG_PHY_MESON_G12A_USB2)		+= phy-meson-g12a-usb2.o
+obj-$(CONFIG_PHY_MESON_GXL_USB3)		+= phy-meson-gxl-usb3.o
+obj-$(CONFIG_PHY_MESON_G12A_USB3_PCIE)		+= phy-meson-g12a-usb3-pcie.o
+obj-$(CONFIG_PHY_MESON_AXG_PCIE)		+= phy-meson-axg-pcie.o
+obj-$(CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG)	+= phy-meson-axg-mipi-pcie-analog.o
diff --git a/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c b/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c
new file mode 100644
index 0000000..1431cbf
--- /dev/null
+++ b/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Amlogic AXG MIPI + PCIE analog PHY driver
+ *
+ * Copyright (C) 2019 Remi Pommarel <repk@triplefau.lt>
+ */
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/regmap.h>
+#include <linux/platform_device.h>
+#include <dt-bindings/phy/phy.h>
+
+#define HHI_MIPI_CNTL0 0x00
+#define		HHI_MIPI_CNTL0_COMMON_BLOCK	GENMASK(31, 28)
+#define		HHI_MIPI_CNTL0_ENABLE		BIT(29)
+#define		HHI_MIPI_CNTL0_BANDGAP		BIT(26)
+#define		HHI_MIPI_CNTL0_DECODE_TO_RTERM	GENMASK(15, 12)
+#define		HHI_MIPI_CNTL0_OUTPUT_EN	BIT(3)
+
+#define HHI_MIPI_CNTL1 0x01
+#define		HHI_MIPI_CNTL1_CH0_CML_PDR_EN	BIT(12)
+#define		HHI_MIPI_CNTL1_LP_ABILITY	GENMASK(5, 4)
+#define		HHI_MIPI_CNTL1_LP_RESISTER	BIT(3)
+#define		HHI_MIPI_CNTL1_INPUT_SETTING	BIT(2)
+#define		HHI_MIPI_CNTL1_INPUT_SEL	BIT(1)
+#define		HHI_MIPI_CNTL1_PRBS7_EN		BIT(0)
+
+#define HHI_MIPI_CNTL2 0x02
+#define		HHI_MIPI_CNTL2_CH_PU		GENMASK(31, 25)
+#define		HHI_MIPI_CNTL2_CH_CTL		GENMASK(24, 19)
+#define		HHI_MIPI_CNTL2_CH0_DIGDR_EN	BIT(18)
+#define		HHI_MIPI_CNTL2_CH_DIGDR_EN	BIT(17)
+#define		HHI_MIPI_CNTL2_LPULPS_EN	BIT(16)
+#define		HHI_MIPI_CNTL2_CH_EN(n)		BIT(15 - (n))
+#define		HHI_MIPI_CNTL2_CH0_LP_CTL	GENMASK(10, 1)
+
+struct phy_axg_mipi_pcie_analog_priv {
+	struct phy *phy;
+	unsigned int mode;
+	struct regmap *regmap;
+};
+
+static const struct regmap_config phy_axg_mipi_pcie_analog_regmap_conf = {
+	.reg_bits = 8,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = HHI_MIPI_CNTL2,
+};
+
+static int phy_axg_mipi_pcie_analog_power_on(struct phy *phy)
+{
+	struct phy_axg_mipi_pcie_analog_priv *priv = phy_get_drvdata(phy);
+
+	/* MIPI not supported yet */
+	if (priv->mode != PHY_TYPE_PCIE)
+		return -EINVAL;
+
+	regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
+			   HHI_MIPI_CNTL0_BANDGAP, HHI_MIPI_CNTL0_BANDGAP);
+
+	regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
+			   HHI_MIPI_CNTL0_ENABLE, HHI_MIPI_CNTL0_ENABLE);
+	return 0;
+}
+
+static int phy_axg_mipi_pcie_analog_power_off(struct phy *phy)
+{
+	struct phy_axg_mipi_pcie_analog_priv *priv = phy_get_drvdata(phy);
+
+	/* MIPI not supported yet */
+	if (priv->mode != PHY_TYPE_PCIE)
+		return -EINVAL;
+
+	regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
+			   HHI_MIPI_CNTL0_BANDGAP, 0);
+	regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
+			   HHI_MIPI_CNTL0_ENABLE, 0);
+	return 0;
+}
+
+static int phy_axg_mipi_pcie_analog_init(struct phy *phy)
+{
+	return 0;
+}
+
+static int phy_axg_mipi_pcie_analog_exit(struct phy *phy)
+{
+	return 0;
+}
+
+static const struct phy_ops phy_axg_mipi_pcie_analog_ops = {
+	.init = phy_axg_mipi_pcie_analog_init,
+	.exit = phy_axg_mipi_pcie_analog_exit,
+	.power_on = phy_axg_mipi_pcie_analog_power_on,
+	.power_off = phy_axg_mipi_pcie_analog_power_off,
+	.owner = THIS_MODULE,
+};
+
+static struct phy *phy_axg_mipi_pcie_analog_xlate(struct device *dev,
+						  struct of_phandle_args *args)
+{
+	struct phy_axg_mipi_pcie_analog_priv *priv = dev_get_drvdata(dev);
+	unsigned int mode;
+
+	if (args->args_count != 1) {
+		dev_err(dev, "invalid number of arguments\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	mode = args->args[0];
+
+	/* MIPI mode is not supported yet */
+	if (mode != PHY_TYPE_PCIE) {
+		dev_err(dev, "invalid phy mode select argument\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	priv->mode = mode;
+	return priv->phy;
+}
+
+static int phy_axg_mipi_pcie_analog_probe(struct platform_device *pdev)
+{
+	struct phy_provider *phy;
+	struct device *dev = &pdev->dev;
+	struct phy_axg_mipi_pcie_analog_priv *priv;
+	struct device_node *np = dev->of_node;
+	struct regmap *map;
+	struct resource *res;
+	void __iomem *base;
+	int ret;
+
+	priv = devm_kmalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base)) {
+		dev_err(dev, "failed to get regmap base\n");
+		return PTR_ERR(base);
+	}
+
+	map = devm_regmap_init_mmio(dev, base,
+				    &phy_axg_mipi_pcie_analog_regmap_conf);
+	if (IS_ERR(map)) {
+		dev_err(dev, "failed to get HHI regmap\n");
+		return PTR_ERR(map);
+	}
+	priv->regmap = map;
+
+	priv->phy = devm_phy_create(dev, np, &phy_axg_mipi_pcie_analog_ops);
+	if (IS_ERR(priv->phy)) {
+		ret = PTR_ERR(priv->phy);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "failed to create PHY\n");
+		return ret;
+	}
+
+	phy_set_drvdata(priv->phy, priv);
+	dev_set_drvdata(dev, priv);
+
+	phy = devm_of_phy_provider_register(dev,
+					    phy_axg_mipi_pcie_analog_xlate);
+
+	return PTR_ERR_OR_ZERO(phy);
+}
+
+static const struct of_device_id phy_axg_mipi_pcie_analog_of_match[] = {
+	{
+		.compatible = "amlogic,axg-mipi-pcie-analog-phy",
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, phy_axg_mipi_pcie_analog_of_match);
+
+static struct platform_driver phy_axg_mipi_pcie_analog_driver = {
+	.probe = phy_axg_mipi_pcie_analog_probe,
+	.driver = {
+		.name = "phy-axg-mipi-pcie-analog",
+		.of_match_table = phy_axg_mipi_pcie_analog_of_match,
+	},
+};
+module_platform_driver(phy_axg_mipi_pcie_analog_driver);
+
+MODULE_AUTHOR("Remi Pommarel <repk@triplefau.lt>");
+MODULE_DESCRIPTION("Amlogic AXG MIPI + PCIE analog PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/amlogic/phy-meson-axg-pcie.c b/drivers/phy/amlogic/phy-meson-axg-pcie.c
new file mode 100644
index 0000000..377ed0d
--- /dev/null
+++ b/drivers/phy/amlogic/phy-meson-axg-pcie.c
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Amlogic AXG PCIE PHY driver
+ *
+ * Copyright (C) 2020 Remi Pommarel <repk@triplefau.lt>
+ */
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/platform_device.h>
+#include <linux/bitfield.h>
+#include <dt-bindings/phy/phy.h>
+
+#define MESON_PCIE_REG0 0x00
+#define		MESON_PCIE_COMMON_CLK	BIT(4)
+#define		MESON_PCIE_PORT_SEL	GENMASK(3, 2)
+#define		MESON_PCIE_CLK		BIT(1)
+#define		MESON_PCIE_POWERDOWN	BIT(0)
+
+#define MESON_PCIE_TWO_X1		FIELD_PREP(MESON_PCIE_PORT_SEL, 0x3)
+#define MESON_PCIE_COMMON_REF_CLK	FIELD_PREP(MESON_PCIE_COMMON_CLK, 0x1)
+#define MESON_PCIE_PHY_INIT		(MESON_PCIE_TWO_X1 |		\
+					 MESON_PCIE_COMMON_REF_CLK)
+#define MESON_PCIE_RESET_DELAY		500
+
+struct phy_axg_pcie_priv {
+	struct phy *phy;
+	struct phy *analog;
+	struct regmap *regmap;
+	struct reset_control *reset;
+};
+
+static const struct regmap_config phy_axg_pcie_regmap_conf = {
+	.reg_bits = 8,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = MESON_PCIE_REG0,
+};
+
+static int phy_axg_pcie_power_on(struct phy *phy)
+{
+	struct phy_axg_pcie_priv *priv = phy_get_drvdata(phy);
+	int ret;
+
+	ret = phy_power_on(priv->analog);
+	if (ret != 0)
+		return ret;
+
+	regmap_update_bits(priv->regmap, MESON_PCIE_REG0,
+			   MESON_PCIE_POWERDOWN, 0);
+	return 0;
+}
+
+static int phy_axg_pcie_power_off(struct phy *phy)
+{
+	struct phy_axg_pcie_priv *priv = phy_get_drvdata(phy);
+	int ret;
+
+	ret = phy_power_off(priv->analog);
+	if (ret != 0)
+		return ret;
+
+	regmap_update_bits(priv->regmap, MESON_PCIE_REG0,
+			   MESON_PCIE_POWERDOWN, 1);
+	return 0;
+}
+
+static int phy_axg_pcie_init(struct phy *phy)
+{
+	struct phy_axg_pcie_priv *priv = phy_get_drvdata(phy);
+	int ret;
+
+	ret = phy_init(priv->analog);
+	if (ret != 0)
+		return ret;
+
+	regmap_write(priv->regmap, MESON_PCIE_REG0, MESON_PCIE_PHY_INIT);
+	return reset_control_reset(priv->reset);
+}
+
+static int phy_axg_pcie_exit(struct phy *phy)
+{
+	struct phy_axg_pcie_priv *priv = phy_get_drvdata(phy);
+	int ret;
+
+	ret = phy_exit(priv->analog);
+	if (ret != 0)
+		return ret;
+
+	return reset_control_reset(priv->reset);
+}
+
+static int phy_axg_pcie_reset(struct phy *phy)
+{
+	struct phy_axg_pcie_priv *priv = phy_get_drvdata(phy);
+	int ret = 0;
+
+	ret = phy_reset(priv->analog);
+	if (ret != 0)
+		goto out;
+
+	ret = reset_control_assert(priv->reset);
+	if (ret != 0)
+		goto out;
+	udelay(MESON_PCIE_RESET_DELAY);
+
+	ret = reset_control_deassert(priv->reset);
+	if (ret != 0)
+		goto out;
+	udelay(MESON_PCIE_RESET_DELAY);
+
+out:
+	return ret;
+}
+
+static const struct phy_ops phy_axg_pcie_ops = {
+	.init = phy_axg_pcie_init,
+	.exit = phy_axg_pcie_exit,
+	.power_on = phy_axg_pcie_power_on,
+	.power_off = phy_axg_pcie_power_off,
+	.reset = phy_axg_pcie_reset,
+	.owner = THIS_MODULE,
+};
+
+static int phy_axg_pcie_probe(struct platform_device *pdev)
+{
+	struct phy_provider *pphy;
+	struct device *dev = &pdev->dev;
+	struct phy_axg_pcie_priv *priv;
+	struct device_node *np = dev->of_node;
+	struct resource *res;
+	void __iomem *base;
+	int ret;
+
+	priv = devm_kmalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->phy = devm_phy_create(dev, np, &phy_axg_pcie_ops);
+	if (IS_ERR(priv->phy)) {
+		ret = PTR_ERR(priv->phy);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "failed to create PHY\n");
+		return ret;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	priv->regmap = devm_regmap_init_mmio(dev, base,
+					     &phy_axg_pcie_regmap_conf);
+	if (IS_ERR(priv->regmap))
+		return PTR_ERR(priv->regmap);
+
+	priv->reset = devm_reset_control_array_get(dev, false, false);
+	if (IS_ERR(priv->reset))
+		return PTR_ERR(priv->reset);
+
+	priv->analog = devm_phy_get(dev, "analog");
+	if (IS_ERR(priv->analog))
+		return PTR_ERR(priv->analog);
+
+	phy_set_drvdata(priv->phy, priv);
+	dev_set_drvdata(dev, priv);
+	pphy = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+	return PTR_ERR_OR_ZERO(pphy);
+}
+
+static const struct of_device_id phy_axg_pcie_of_match[] = {
+	{
+		.compatible = "amlogic,axg-pcie-phy",
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, phy_axg_pcie_of_match);
+
+static struct platform_driver phy_axg_pcie_driver = {
+	.probe = phy_axg_pcie_probe,
+	.driver = {
+		.name = "phy-axg-pcie",
+		.of_match_table = phy_axg_pcie_of_match,
+	},
+};
+module_platform_driver(phy_axg_pcie_driver);
+
+MODULE_AUTHOR("Remi Pommarel <repk@triplefau.lt>");
+MODULE_DESCRIPTION("Amlogic AXG PCIE PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index df0ef69..834c599 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -126,6 +126,18 @@
 	  Driver for TI DA850/OMAP-L138/AM18XX pinconf. Used to control
 	  pullup/pulldown pin groups.
 
+config PINCTRL_DA9062
+	tristate "Dialog Semiconductor DA9062 PMIC pinctrl and GPIO Support"
+	depends on MFD_DA9062
+	select GPIOLIB
+	help
+	  The Dialog DA9062 PMIC provides multiple GPIOs that can be muxed for
+	  different functions. This driver bundles a pinctrl driver to select the
+	  function muxing and a GPIO driver to handle the GPIO when the GPIO
+	  function is selected.
+
+	  Say yes to enable pinctrl and GPIO support for the DA9062 PMIC.
+
 config PINCTRL_DIGICOLOR
 	bool
 	depends on OF && (ARCH_DIGICOLOR || COMPILE_TEST)
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 879f312..0b36a1c 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -16,6 +16,7 @@
 obj-$(CONFIG_PINCTRL_AMD)	+= pinctrl-amd.o
 obj-$(CONFIG_PINCTRL_BM1880)	+= pinctrl-bm1880.o
 obj-$(CONFIG_PINCTRL_DA850_PUPD) += pinctrl-da850-pupd.o
+obj-$(CONFIG_PINCTRL_DA9062)	+= pinctrl-da9062.o
 obj-$(CONFIG_PINCTRL_DIGICOLOR)	+= pinctrl-digicolor.o
 obj-$(CONFIG_PINCTRL_FALCON)	+= pinctrl-falcon.o
 obj-$(CONFIG_PINCTRL_GEMINI)	+= pinctrl-gemini.o
diff --git a/drivers/pinctrl/actions/pinctrl-s700.c b/drivers/pinctrl/actions/pinctrl-s700.c
index 771d6fd..47a4ccd 100644
--- a/drivers/pinctrl/actions/pinctrl-s700.c
+++ b/drivers/pinctrl/actions/pinctrl-s700.c
@@ -1125,317 +1125,317 @@ static const struct owl_pingroup s700_groups[] = {
 };
 
 static const char * const nor_groups[] = {
-	"lcd0_d18",
-	"i2s_d0",
-	"i2s0_pcm0",
-	"i2s1_pcm0",
-	"i2s_d1",
-	"ks_in2",
-	"ks_in1",
-	"ks_in0",
-	"ks_in3",
-	"ks_out0",
-	"ks_out1",
-	"ks_out2",
-	"lcd0_d2",
-	"lvds_ee_pn",
-	"uart2_rx_tx",
-	"spi0_i2c_pcm",
-	"lvds_e_pn",
-	"sd0_d0",
-	"sd0_d1",
-	"sd0_d2_d3",
-	"sd1_d0_d3",
-	"sd0_cmd",
-	"sd1_cmd",
-	"sens0_ckout",
-	"sen0_pclk",
+	"lcd0_d18_mfp",
+	"i2s_d0_mfp",
+	"i2s0_pcm0_mfp",
+	"i2s1_pcm0_mfp",
+	"i2s_d1_mfp",
+	"ks_in2_mfp",
+	"ks_in1_mfp",
+	"ks_in0_mfp",
+	"ks_in3_mfp",
+	"ks_out0_mfp",
+	"ks_out1_mfp",
+	"ks_out2_mfp",
+	"lcd0_d2_mfp",
+	"lvds_ee_pn_mfp",
+	"uart2_rx_tx_mfp",
+	"spi0_i2c_pcm_mfp",
+	"lvds_e_pn_mfp",
+	"sd0_d0_mfp",
+	"sd0_d1_mfp",
+	"sd0_d2_d3_mfp",
+	"sd1_d0_d3_mfp",
+	"sd0_cmd_mfp",
+	"sd1_cmd_mfp",
+	"sens0_ckout_mfp",
+	"sen0_pclk_mfp",
 };
 
 static const char * const eth_rmii_groups[] = {
-	"rgmii_txd23",
-	"rgmii_rxd2",
-	"rgmii_rxd3",
-	"rgmii_txd01",
-	"rgmii_txd0",
-	"rgmii_txd1",
-	"rgmii_txen",
-	"rgmii_rxen",
-	"rgmii_rxd1",
-	"rgmii_rxd0",
-	"rgmii_ref_clk",
+	"rgmii_txd23_mfp",
+	"rgmii_rxd2_mfp",
+	"rgmii_rxd3_mfp",
+	"rgmii_txd01_mfp",
+	"rgmii_txd0_mfp",
+	"rgmii_txd1_mfp",
+	"rgmii_txen_mfp",
+	"rgmii_rxen_mfp",
+	"rgmii_rxd1_mfp",
+	"rgmii_rxd0_mfp",
+	"rgmii_ref_clk_mfp",
 	"eth_smi_dummy",
 };
 
 static const char * const eth_smii_groups[] = {
-	"rgmii_txd0",
-	"rgmii_txd1",
-	"rgmii_rxd0",
-	"rgmii_rxd1",
-	"rgmii_ref_clk",
+	"rgmii_txd0_mfp",
+	"rgmii_txd1_mfp",
+	"rgmii_rxd0_mfp",
+	"rgmii_rxd1_mfp",
+	"rgmii_ref_clk_mfp",
 	"eth_smi_dummy",
 };
 
 static const char * const spi0_groups[] = {
-	"dsi_dn0",
-	"dsi_dp2",
-	"dsi_dp0",
-	"uart2_rx_tx",
-	"spi0_i2c_pcm",
-	"dsi_dn2",
+	"dsi_dn0_mfp",
+	"dsi_dp2_mfp",
+	"dsi_dp0_mfp",
+	"uart2_rx_tx_mfp",
+	"spi0_i2c_pcm_mfp",
+	"dsi_dn2_mfp",
 };
 
 static const char * const spi1_groups[] = {
-	"uart0_rx",
-	"uart0_tx",
+	"uart0_rx_mfp",
+	"uart0_tx_mfp",
 	"i2c0_mfp",
 };
 
 static const char * const spi2_groups[] = {
-	"rgmii_txd01",
-	"rgmii_txd0",
-	"rgmii_txd1",
-	"rgmii_ref_clk",
-	"dnand_acle_ce0",
+	"rgmii_txd01_mfp",
+	"rgmii_txd0_mfp",
+	"rgmii_txd1_mfp",
+	"rgmii_ref_clk_mfp",
+	"dnand_acle_ce0_mfp",
 };
 
 static const char * const spi3_groups[] = {
-	"rgmii_txen",
-	"rgmii_rxen",
-	"rgmii_rxd1",
-	"rgmii_rxd0",
+	"rgmii_txen_mfp",
+	"rgmii_rxen_mfp",
+	"rgmii_rxd1_mfp",
+	"rgmii_rxd0_mfp",
 };
 
 static const char * const sens0_groups[] = {
-	"csi_cn_cp",
-	"sens0_ckout",
-	"csi_dn_dp",
-	"sen0_pclk",
+	"csi_cn_cp_mfp",
+	"sens0_ckout_mfp",
+	"csi_dn_dp_mfp",
+	"sen0_pclk_mfp",
 };
 
 static const char * const sens1_groups[] = {
-	"lcd0_d18",
-	"ks_in2",
-	"ks_in1",
-	"ks_in0",
-	"ks_in3",
-	"ks_out0",
-	"ks_out1",
-	"ks_out2",
-	"sens0_ckout",
-	"pcm1_in",
-	"pcm1_clk",
-	"pcm1_sync",
-	"pcm1_out",
+	"lcd0_d18_mfp",
+	"ks_in2_mfp",
+	"ks_in1_mfp",
+	"ks_in0_mfp",
+	"ks_in3_mfp",
+	"ks_out0_mfp",
+	"ks_out1_mfp",
+	"ks_out2_mfp",
+	"sens0_ckout_mfp",
+	"pcm1_in_mfp",
+	"pcm1_clk_mfp",
+	"pcm1_sync_mfp",
+	"pcm1_out_mfp",
 };
 
 static const char * const uart0_groups[] = {
-	"uart2_rtsb",
-	"uart2_ctsb",
-	"uart0_rx",
-	"uart0_tx",
+	"uart2_rtsb_mfp",
+	"uart2_ctsb_mfp",
+	"uart0_rx_mfp",
+	"uart0_tx_mfp",
 };
 
 static const char * const uart1_groups[] = {
-	"sd0_d2_d3",
+	"sd0_d2_d3_mfp",
 	"i2c0_mfp",
 };
 
 static const char * const uart2_groups[] = {
-	"rgmii_txen",
-	"rgmii_rxen",
-	"rgmii_rxd1",
-	"rgmii_rxd0",
-	"dsi_dn0",
-	"dsi_dp2",
-	"dsi_dp0",
-	"uart2_rx_tx",
-	"dsi_dn2",
-	"uart2_rtsb",
-	"uart2_ctsb",
-	"sd0_d0",
-	"sd0_d1",
-	"sd0_d2_d3",
-	"uart0_rx",
-	"uart0_tx",
+	"rgmii_txen_mfp",
+	"rgmii_rxen_mfp",
+	"rgmii_rxd1_mfp",
+	"rgmii_rxd0_mfp",
+	"dsi_dn0_mfp",
+	"dsi_dp2_mfp",
+	"dsi_dp0_mfp",
+	"uart2_rx_tx_mfp",
+	"dsi_dn2_mfp",
+	"uart2_rtsb_mfp",
+	"uart2_ctsb_mfp",
+	"sd0_d0_mfp",
+	"sd0_d1_mfp",
+	"sd0_d2_d3_mfp",
+	"uart0_rx_mfp",
+	"uart0_tx_mfp",
 	"i2c0_mfp",
 	"uart2_dummy"
 };
 
 static const char * const uart3_groups[] = {
-	"rgmii_txd23",
-	"rgmii_rxd2",
-	"rgmii_rxd3",
-	"uart3_rtsb",
-	"uart3_ctsb",
+	"rgmii_txd23_mfp",
+	"rgmii_rxd2_mfp",
+	"rgmii_rxd3_mfp",
+	"uart3_rtsb_mfp",
+	"uart3_ctsb_mfp",
 	"uart3_dummy"
 };
 
 static const char * const uart4_groups[] = {
-	"rgmii_txd01",
-	"rgmii_ref_clk",
-	"ks_out0",
-	"ks_out1",
+	"rgmii_txd01_mfp",
+	"rgmii_ref_clk_mfp",
+	"ks_out0_mfp",
+	"ks_out1_mfp",
 };
 
 static const char * const uart5_groups[] = {
-	"rgmii_rxd1",
-	"rgmii_rxd0",
-	"ks_out0",
-	"ks_out2",
-	"uart3_rtsb",
-	"uart3_ctsb",
-	"sd0_d0",
-	"sd0_d1",
+	"rgmii_rxd1_mfp",
+	"rgmii_rxd0_mfp",
+	"ks_out0_mfp",
+	"ks_out2_mfp",
+	"uart3_rtsb_mfp",
+	"uart3_ctsb_mfp",
+	"sd0_d0_mfp",
+	"sd0_d1_mfp",
 };
 
 static const char * const uart6_groups[] = {
-	"rgmii_txd0",
-	"rgmii_txd1",
+	"rgmii_txd0_mfp",
+	"rgmii_txd1_mfp",
 };
 
 static const char * const i2s0_groups[] = {
-	"i2s_d0",
-	"i2s_pcm1",
-	"i2s0_pcm0",
+	"i2s_d0_mfp",
+	"i2s_pcm1_mfp",
+	"i2s0_pcm0_mfp",
 };
 
 static const char * const i2s1_groups[] = {
-	"i2s1_pcm0",
-	"i2s_d1",
+	"i2s1_pcm0_mfp",
+	"i2s_d1_mfp",
 	"i2s1_dummy",
-	"spi0_i2c_pcm",
-	"uart0_rx",
-	"uart0_tx",
+	"spi0_i2c_pcm_mfp",
+	"uart0_rx_mfp",
+	"uart0_tx_mfp",
 };
 
 static const char * const pcm1_groups[] = {
-	"i2s_pcm1",
-	"spi0_i2c_pcm",
-	"uart0_rx",
-	"uart0_tx",
-	"pcm1_in",
-	"pcm1_clk",
-	"pcm1_sync",
-	"pcm1_out",
+	"i2s_pcm1_mfp",
+	"spi0_i2c_pcm_mfp",
+	"uart0_rx_mfp",
+	"uart0_tx_mfp",
+	"pcm1_in_mfp",
+	"pcm1_clk_mfp",
+	"pcm1_sync_mfp",
+	"pcm1_out_mfp",
 };
 
 static const char * const pcm0_groups[] = {
-	"i2s0_pcm0",
-	"i2s1_pcm0",
-	"uart2_rx_tx",
-	"spi0_i2c_pcm",
+	"i2s0_pcm0_mfp",
+	"i2s1_pcm0_mfp",
+	"uart2_rx_tx_mfp",
+	"spi0_i2c_pcm_mfp",
 };
 
 static const char * const ks_groups[] = {
-	"ks_in2",
-	"ks_in1",
-	"ks_in0",
-	"ks_in3",
-	"ks_out0",
-	"ks_out1",
-	"ks_out2",
+	"ks_in2_mfp",
+	"ks_in1_mfp",
+	"ks_in0_mfp",
+	"ks_in3_mfp",
+	"ks_out0_mfp",
+	"ks_out1_mfp",
+	"ks_out2_mfp",
 };
 
 static const char * const jtag_groups[] = {
-	"ks_in2",
-	"ks_in1",
-	"ks_in0",
-	"ks_in3",
-	"ks_out1",
-	"sd0_d0",
-	"sd0_d2_d3",
-	"sd0_cmd",
-	"sd0_clk",
+	"ks_in2_mfp",
+	"ks_in1_mfp",
+	"ks_in0_mfp",
+	"ks_in3_mfp",
+	"ks_out1_mfp",
+	"sd0_d0_mfp",
+	"sd0_d2_d3_mfp",
+	"sd0_cmd_mfp",
+	"sd0_clk_mfp",
 };
 
 static const char * const pwm0_groups[] = {
-	"rgmii_rxd2",
-	"rgmii_txen",
-	"ks_in2",
-	"sen0_pclk",
+	"rgmii_rxd2_mfp",
+	"rgmii_txen_mfp",
+	"ks_in2_mfp",
+	"sen0_pclk_mfp",
 };
 
 static const char * const pwm1_groups[] = {
-	"rgmii_rxen",
-	"ks_in1",
-	"ks_in3",
-	"sens0_ckout",
+	"rgmii_rxen_mfp",
+	"ks_in1_mfp",
+	"ks_in3_mfp",
+	"sens0_ckout_mfp",
 };
 
 static const char * const pwm2_groups[] = {
-	"lcd0_d18",
-	"rgmii_rxd3",
-	"rgmii_rxd1",
-	"ks_out0",
-	"ks_out2",
+	"lcd0_d18_mfp",
+	"rgmii_rxd3_mfp",
+	"rgmii_rxd1_mfp",
+	"ks_out0_mfp",
+	"ks_out2_mfp",
 };
 
 static const char * const pwm3_groups[] = {
-	"rgmii_rxd0",
-	"ks_out1",
-	"lcd0_d2",
+	"rgmii_rxd0_mfp",
+	"ks_out1_mfp",
+	"lcd0_d2_mfp",
 };
 
 static const char * const pwm4_groups[] = {
-	"lcd0_d18",
-	"rgmii_txd01",
-	"rgmii_txd0",
-	"ks_in0",
-	"pcm1_in",
-	"nand_ceb3",
+	"lcd0_d18_mfp",
+	"rgmii_txd01_mfp",
+	"rgmii_txd0_mfp",
+	"ks_in0_mfp",
+	"pcm1_in_mfp",
+	"nand_ceb3_mfp",
 };
 
 static const char * const pwm5_groups[] = {
-	"rgmii_txd1",
-	"ks_in1",
-	"pcm1_clk",
-	"nand_ceb2",
+	"rgmii_txd1_mfp",
+	"ks_in1_mfp",
+	"pcm1_clk_mfp",
+	"nand_ceb2_mfp",
 };
 
 static const char * const p0_groups[] = {
-	"ks_in2",
-	"ks_in0",
+	"ks_in2_mfp",
+	"ks_in0_mfp",
 };
 
 static const char * const sd0_groups[] = {
-	"ks_out0",
-	"ks_out1",
-	"ks_out2",
-	"lcd0_d2",
-	"dsi_dp3",
-	"dsi_dp0",
-	"sd0_d0",
-	"sd0_d1",
-	"sd0_d2_d3",
-	"sd1_d0_d3",
-	"sd0_cmd",
-	"sd0_clk",
+	"ks_out0_mfp",
+	"ks_out1_mfp",
+	"ks_out2_mfp",
+	"lcd0_d2_mfp",
+	"dsi_dp3_mfp",
+	"dsi_dp0_mfp",
+	"sd0_d0_mfp",
+	"sd0_d1_mfp",
+	"sd0_d2_d3_mfp",
+	"sd1_d0_d3_mfp",
+	"sd0_cmd_mfp",
+	"sd0_clk_mfp",
 };
 
 static const char * const sd1_groups[] = {
-	"dsi_dp2",
-	"mfp1_16_14",
-	"lcd0_d2",
-	"mfp1_16_14_d17",
-	"dsi_dp3",
-	"dsi_dn3",
-	"dsi_dnp1_cp_d2",
-	"dsi_dnp1_cp_d17",
-	"dsi_dn2",
-	"sd1_d0_d3",
-	"sd1_cmd",
+	"dsi_dp2_mfp",
+	"mfp1_16_14_mfp",
+	"lcd0_d2_mfp",
+	"mfp1_16_14_d17_mfp",
+	"dsi_dp3_mfp",
+	"dsi_dn3_mfp",
+	"dsi_dnp1_cp_d2_mfp",
+	"dsi_dnp1_cp_d17_mfp",
+	"dsi_dn2_mfp",
+	"sd1_d0_d3_mfp",
+	"sd1_cmd_mfp",
 	"sd1_dummy",
 };
 
 static const char * const sd2_groups[] = {
-	"dnand_data_wr",
+	"dnand_data_wr_mfp",
 };
 
 static const char * const i2c0_groups[] = {
-	"uart0_rx",
-	"uart0_tx",
-	"i2c0_mfp",
+	"uart0_rx_mfp",
+	"uart0_tx_mfp",
+	"i2c0_mfp_mfp",
 };
 
 static const char * const i2c1_groups[] = {
@@ -1448,85 +1448,85 @@ static const char * const i2c2_groups[] = {
 };
 
 static const char * const i2c3_groups[] = {
-	"uart2_rx_tx",
-	"pcm1_sync",
-	"pcm1_out",
+	"uart2_rx_tx_mfp",
+	"pcm1_sync_mfp",
+	"pcm1_out_mfp",
 };
 
 static const char * const lvds_groups[] = {
-	"lvds_o_pn",
-	"lvds_ee_pn",
-	"lvds_e_pn",
+	"lvds_o_pn_mfp",
+	"lvds_ee_pn_mfp",
+	"lvds_e_pn_mfp",
 };
 
 static const char * const bt_groups[] = {
-	"i2s_pcm1",
-	"i2s0_pcm0",
-	"i2s1_pcm0",
-	"ks_in2",
-	"ks_in1",
-	"ks_in0",
-	"ks_in3",
-	"ks_out0",
-	"ks_out1",
-	"ks_out2",
-	"lvds_o_pn",
-	"lvds_ee_pn",
-	"pcm1_in",
-	"pcm1_clk",
-	"pcm1_sync",
-	"pcm1_out",
+	"i2s_pcm1_mfp",
+	"i2s0_pcm0_mfp",
+	"i2s1_pcm0_mfp",
+	"ks_in2_mfp",
+	"ks_in1_mfp",
+	"ks_in0_mfp",
+	"ks_in3_mfp",
+	"ks_out0_mfp",
+	"ks_out1_mfp",
+	"ks_out2_mfp",
+	"lvds_o_pn_mfp",
+	"lvds_ee_pn_mfp",
+	"pcm1_in_mfp",
+	"pcm1_clk_mfp",
+	"pcm1_sync_mfp",
+	"pcm1_out_mfp",
 };
 
 static const char * const lcd0_groups[] = {
-	"lcd0_d18",
-	"lcd0_d2",
-	"mfp1_16_14_d17",
-	"lvds_o_pn",
-	"dsi_dp3",
-	"dsi_dn3",
-	"lvds_ee_pn",
-	"dsi_dnp1_cp_d2",
-	"dsi_dnp1_cp_d17",
-	"lvds_e_pn",
+	"lcd0_d18_mfp",
+	"lcd0_d2_mfp",
+	"mfp1_16_14_d17_mfp",
+	"lvds_o_pn_mfp",
+	"dsi_dp3_mfp",
+	"dsi_dn3_mfp",
+	"lvds_ee_pn_mfp",
+	"dsi_dnp1_cp_d2_mfp",
+	"dsi_dnp1_cp_d17_mfp",
+	"lvds_e_pn_mfp",
 };
 
 
 static const char * const usb30_groups[] = {
-	"ks_in1",
+	"ks_in1_mfp",
 };
 
 static const char * const clko_25m_groups[] = {
-	"clko_25m",
+	"clko_25m_mfp",
 };
 
 static const char * const mipi_csi_groups[] = {
-	"csi_cn_cp",
-	"csi_dn_dp",
+	"csi_cn_cp_mfp",
+	"csi_dn_dp_mfp",
 };
 
 static const char * const dsi_groups[] = {
-	"dsi_dn0",
-	"dsi_dp2",
-	"dsi_dp3",
-	"dsi_dn3",
-	"dsi_dp0",
-	"dsi_dnp1_cp_d2",
-	"dsi_dnp1_cp_d17",
-	"dsi_dn2",
+	"dsi_dn0_mfp",
+	"dsi_dp2_mfp",
+	"dsi_dp3_mfp",
+	"dsi_dn3_mfp",
+	"dsi_dp0_mfp",
+	"dsi_dnp1_cp_d2_mfp",
+	"dsi_dnp1_cp_d17_mfp",
+	"dsi_dn2_mfp",
 	"dsi_dummy",
 };
 
 static const char * const nand_groups[] = {
-	"dnand_data_wr",
-	"dnand_acle_ce0",
-	"nand_ceb2",
-	"nand_ceb3",
+	"dnand_data_wr_mfp",
+	"dnand_acle_ce0_mfp",
+	"nand_ceb2_mfp",
+	"nand_ceb3_mfp",
 	"nand_dummy",
 };
 
 static const char * const spdif_groups[] = {
-	"uart0_tx",
+	"uart0_tx_mfp",
 };
 
 static const char * const sirq0_groups[] = {
diff --git a/drivers/pinctrl/bcm/pinctrl-bcm2835.c b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
index 0de1a3a..06bd2b7 100644
--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
@@ -37,12 +37,10 @@
 
 #define MODULE_NAME "pinctrl-bcm2835"
 #define BCM2835_NUM_GPIOS 54
+#define BCM2711_NUM_GPIOS 58
 #define BCM2835_NUM_BANKS 2
 #define BCM2835_NUM_IRQS  3
 
-#define BCM2835_PIN_BITMAP_SZ \
-	DIV_ROUND_UP(BCM2835_NUM_GPIOS, sizeof(unsigned long) * 8)
-
 /* GPIO register offsets */
 #define GPFSEL0		0x0	/* Function Select */
 #define GPSET0		0x1c	/* Pin Output Set */
@@ -81,10 +79,11 @@ struct bcm2835_pinctrl {
 
 	/* note: locking assumes each bank will have its own unsigned long */
 	unsigned long enabled_irq_map[BCM2835_NUM_BANKS];
-	unsigned int irq_type[BCM2835_NUM_GPIOS];
+	unsigned int irq_type[BCM2711_NUM_GPIOS];
 
 	struct pinctrl_dev *pctl_dev;
 	struct gpio_chip gpio_chip;
+	struct pinctrl_desc pctl_desc;
 	struct pinctrl_gpio_range gpio_range;
 
 	raw_spinlock_t irq_lock[BCM2835_NUM_BANKS];
@@ -147,6 +146,10 @@ static struct pinctrl_pin_desc bcm2835_gpio_pins[] = {
 	BCM2835_GPIO_PIN(51),
 	BCM2835_GPIO_PIN(52),
 	BCM2835_GPIO_PIN(53),
+	BCM2835_GPIO_PIN(54),
+	BCM2835_GPIO_PIN(55),
+	BCM2835_GPIO_PIN(56),
+	BCM2835_GPIO_PIN(57),
 };
 
 /* one pin per group */
@@ -205,6 +208,10 @@ static const char * const bcm2835_gpio_groups[] = {
 	"gpio51",
 	"gpio52",
 	"gpio53",
+	"gpio54",
+	"gpio55",
+	"gpio56",
+	"gpio57",
 };
 
 enum bcm2835_fsel {
@@ -322,7 +329,10 @@ static int bcm2835_gpio_get_direction(struct gpio_chip *chip, unsigned int offse
 	if (fsel > BCM2835_FSEL_GPIO_OUT)
 		return -EINVAL;
 
-	return (fsel == BCM2835_FSEL_GPIO_IN);
+	if (fsel == BCM2835_FSEL_GPIO_IN)
+		return GPIO_LINE_DIRECTION_IN;
+
+	return GPIO_LINE_DIRECTION_OUT;
 }
 
 static void bcm2835_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
@@ -355,6 +365,22 @@ static const struct gpio_chip bcm2835_gpio_chip = {
 	.can_sleep = false,
 };
 
+static const struct gpio_chip bcm2711_gpio_chip = {
+	.label = "pinctrl-bcm2711",
+	.owner = THIS_MODULE,
+	.request = gpiochip_generic_request,
+	.free = gpiochip_generic_free,
+	.direction_input = bcm2835_gpio_direction_input,
+	.direction_output = bcm2835_gpio_direction_output,
+	.get_direction = bcm2835_gpio_get_direction,
+	.get = bcm2835_gpio_get,
+	.set = bcm2835_gpio_set,
+	.set_config = gpiochip_generic_config,
+	.base = -1,
+	.ngpio = BCM2711_NUM_GPIOS,
+	.can_sleep = false,
+};
+
 static void bcm2835_gpio_irq_handle_bank(struct bcm2835_pinctrl *pc,
 					 unsigned int bank, u32 mask)
 {
@@ -401,7 +427,7 @@ static void bcm2835_gpio_irq_handler(struct irq_desc *desc)
 		bcm2835_gpio_irq_handle_bank(pc, 0, 0xf0000000);
 		bcm2835_gpio_irq_handle_bank(pc, 1, 0x00003fff);
 		break;
-	case 2: /* IRQ2 covers GPIOs 46-53 */
+	case 2: /* IRQ2 covers GPIOs 46-57 */
 		bcm2835_gpio_irq_handle_bank(pc, 1, 0x003fc000);
 		break;
 	}
@@ -620,7 +646,7 @@ static struct irq_chip bcm2835_gpio_irq_chip = {
 
 static int bcm2835_pctl_get_groups_count(struct pinctrl_dev *pctldev)
 {
-	return ARRAY_SIZE(bcm2835_gpio_groups);
+	return BCM2835_NUM_GPIOS;
 }
 
 static const char *bcm2835_pctl_get_group_name(struct pinctrl_dev *pctldev,
@@ -778,7 +804,7 @@ static int bcm2835_pctl_dt_node_to_map(struct pinctrl_dev *pctldev,
 		err = of_property_read_u32_index(np, "brcm,pins", i, &pin);
 		if (err)
 			goto out;
-		if (pin >= ARRAY_SIZE(bcm2835_gpio_pins)) {
+		if (pin >= pc->pctl_desc.npins) {
 			dev_err(pc->dev, "%pOF: invalid brcm,pins value %d\n",
 				np, pin);
 			err = -EINVAL;
@@ -854,7 +880,7 @@ static int bcm2835_pmx_get_function_groups(struct pinctrl_dev *pctldev,
 {
 	/* every pin can do every function */
 	*groups = bcm2835_gpio_groups;
-	*num_groups = ARRAY_SIZE(bcm2835_gpio_groups);
+	*num_groups = BCM2835_NUM_GPIOS;
 
 	return 0;
 }
@@ -1054,29 +1080,62 @@ static const struct pinconf_ops bcm2711_pinconf_ops = {
 	.pin_config_set = bcm2711_pinconf_set,
 };
 
-static struct pinctrl_desc bcm2835_pinctrl_desc = {
+static const struct pinctrl_desc bcm2835_pinctrl_desc = {
 	.name = MODULE_NAME,
 	.pins = bcm2835_gpio_pins,
-	.npins = ARRAY_SIZE(bcm2835_gpio_pins),
+	.npins = BCM2835_NUM_GPIOS,
 	.pctlops = &bcm2835_pctl_ops,
 	.pmxops = &bcm2835_pmx_ops,
 	.confops = &bcm2835_pinconf_ops,
 	.owner = THIS_MODULE,
 };
 
-static struct pinctrl_gpio_range bcm2835_pinctrl_gpio_range = {
+static const struct pinctrl_desc bcm2711_pinctrl_desc = {
+	.name = "pinctrl-bcm2711",
+	.pins = bcm2835_gpio_pins,
+	.npins = BCM2711_NUM_GPIOS,
+	.pctlops = &bcm2835_pctl_ops,
+	.pmxops = &bcm2835_pmx_ops,
+	.confops = &bcm2711_pinconf_ops,
+	.owner = THIS_MODULE,
+};
+
+static const struct pinctrl_gpio_range bcm2835_pinctrl_gpio_range = {
 	.name = MODULE_NAME,
 	.npins = BCM2835_NUM_GPIOS,
 };
 
+static const struct pinctrl_gpio_range bcm2711_pinctrl_gpio_range = {
+	.name = "pinctrl-bcm2711",
+	.npins = BCM2711_NUM_GPIOS,
+};
+
+struct bcm_plat_data {
+	const struct gpio_chip *gpio_chip;
+	const struct pinctrl_desc *pctl_desc;
+	const struct pinctrl_gpio_range *gpio_range;
+};
+
+static const struct bcm_plat_data bcm2835_plat_data = {
+	.gpio_chip = &bcm2835_gpio_chip,
+	.pctl_desc = &bcm2835_pinctrl_desc,
+	.gpio_range = &bcm2835_pinctrl_gpio_range,
+};
+
+static const struct bcm_plat_data bcm2711_plat_data = {
+	.gpio_chip = &bcm2711_gpio_chip,
+	.pctl_desc = &bcm2711_pinctrl_desc,
+	.gpio_range = &bcm2711_pinctrl_gpio_range,
+};
+
 static const struct of_device_id bcm2835_pinctrl_match[] = {
 	{
 		.compatible = "brcm,bcm2835-gpio",
-		.data = &bcm2835_pinconf_ops,
+		.data = &bcm2835_plat_data,
 	},
 	{
 		.compatible = "brcm,bcm2711-gpio",
-		.data = &bcm2711_pinconf_ops,
+		.data = &bcm2711_plat_data,
 	},
 	{}
 };
@@ -1085,14 +1144,15 @@ static int bcm2835_pinctrl_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct device_node *np = dev->of_node;
+	const struct bcm_plat_data *pdata;
 	struct bcm2835_pinctrl *pc;
 	struct gpio_irq_chip *girq;
 	struct resource iomem;
 	int err, i;
 	const struct of_device_id *match;
 
-	BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_pins) != BCM2835_NUM_GPIOS);
-	BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_groups) != BCM2835_NUM_GPIOS);
+	BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_pins) != BCM2711_NUM_GPIOS);
+	BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_groups) != BCM2711_NUM_GPIOS);
 
 	pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL);
 	if (!pc)
@@ -1111,7 +1171,13 @@ static int bcm2835_pinctrl_probe(struct platform_device *pdev)
 	if (IS_ERR(pc->base))
 		return PTR_ERR(pc->base);
 
-	pc->gpio_chip = bcm2835_gpio_chip;
+	match = of_match_node(bcm2835_pinctrl_match, pdev->dev.of_node);
+	if (!match)
+		return -EINVAL;
+
+	pdata = match->data;
+
+	pc->gpio_chip = *pdata->gpio_chip;
 	pc->gpio_chip.parent = dev;
 	pc->gpio_chip.of_node = np;
 
@@ -1162,19 +1228,14 @@ static int bcm2835_pinctrl_probe(struct platform_device *pdev)
 		return err;
 	}
 
-	match = of_match_node(bcm2835_pinctrl_match, pdev->dev.of_node);
-	if (match) {
-		bcm2835_pinctrl_desc.confops =
-			(const struct pinconf_ops *)match->data;
-	}
-
-	pc->pctl_dev = devm_pinctrl_register(dev, &bcm2835_pinctrl_desc, pc);
+	pc->pctl_desc = *pdata->pctl_desc;
+	pc->pctl_dev = devm_pinctrl_register(dev, &pc->pctl_desc, pc);
 	if (IS_ERR(pc->pctl_dev)) {
 		gpiochip_remove(&pc->gpio_chip);
 		return PTR_ERR(pc->pctl_dev);
 	}
 
-	pc->gpio_range = bcm2835_pinctrl_gpio_range;
+	pc->gpio_range = *pdata->gpio_range;
 	pc->gpio_range.base = pc->gpio_chip.base;
 	pc->gpio_range.gc = &pc->gpio_chip;
 	pinctrl_add_gpio_range(pc->pctl_dev, &pc->gpio_range);
diff --git a/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c b/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c
index 2516621..a38f0d5 100644
--- a/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c
+++ b/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c
@@ -363,7 +363,10 @@ static int iproc_gpio_get_direction(struct gpio_chip *gc, unsigned int gpio)
 	unsigned int offset = IPROC_GPIO_REG(gpio, IPROC_GPIO_OUT_EN_OFFSET);
 	unsigned int shift = IPROC_GPIO_SHIFT(gpio);
 
-	return !(readl(chip->base + offset) & BIT(shift));
+	if (readl(chip->base + offset) & BIT(shift))
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
 }
 
 static void iproc_gpio_set(struct gpio_chip *gc, unsigned gpio, int val)
diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c
index f23c55e..821242b 100644
--- a/drivers/pinctrl/core.c
+++ b/drivers/pinctrl/core.c
@@ -176,6 +176,7 @@ const char *pin_get_name(struct pinctrl_dev *pctldev, const unsigned pin)
 
 	return desc->name;
 }
+EXPORT_SYMBOL_GPL(pin_get_name);
 
 /* Deletes a range of pin descriptors */
 static void pinctrl_free_pindescs(struct pinctrl_dev *pctldev,
diff --git a/drivers/pinctrl/devicetree.c b/drivers/pinctrl/devicetree.c
index 1ed20ac..c6fe7d6 100644
--- a/drivers/pinctrl/devicetree.c
+++ b/drivers/pinctrl/devicetree.c
@@ -103,6 +103,7 @@ struct pinctrl_dev *of_pinctrl_get(struct device_node *np)
 {
 	return get_pinctrl_dev_from_of_node(np);
 }
+EXPORT_SYMBOL_GPL(of_pinctrl_get);
 
 static int dt_to_map_one_config(struct pinctrl *p,
 				struct pinctrl_dev *hog_pctldev,
diff --git a/drivers/pinctrl/freescale/Kconfig b/drivers/pinctrl/freescale/Kconfig
index de775a8..c784663 100644
--- a/drivers/pinctrl/freescale/Kconfig
+++ b/drivers/pinctrl/freescale/Kconfig
@@ -125,28 +125,28 @@
 
 config PINCTRL_IMX8MM
 	bool "IMX8MM pinctrl driver"
-	depends on ARCH_MXC && ARM64
+	depends on ARCH_MXC
 	select PINCTRL_IMX
 	help
 	  Say Y here to enable the imx8mm pinctrl driver
 
 config PINCTRL_IMX8MN
 	bool "IMX8MN pinctrl driver"
-	depends on ARCH_MXC && ARM64
+	depends on ARCH_MXC
 	select PINCTRL_IMX
 	help
 	  Say Y here to enable the imx8mn pinctrl driver
 
 config PINCTRL_IMX8MP
 	bool "IMX8MP pinctrl driver"
-	depends on ARCH_MXC && ARM64
+	depends on ARCH_MXC
 	select PINCTRL_IMX
 	help
 	  Say Y here to enable the imx8mp pinctrl driver
 
 config PINCTRL_IMX8MQ
 	bool "IMX8MQ pinctrl driver"
-	depends on ARCH_MXC && ARM64
+	depends on ARCH_MXC
 	select PINCTRL_IMX
 	help
 	  Say Y here to enable the imx8mq pinctrl driver
diff --git a/drivers/pinctrl/mediatek/pinctrl-mt6765.c b/drivers/pinctrl/mediatek/pinctrl-mt6765.c
index 32451e8..905dae8c 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mt6765.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mt6765.c
@@ -1070,15 +1070,12 @@ static const struct mtk_pin_soc mt6765_data = {
 	.ngrps = ARRAY_SIZE(mtk_pins_mt6765),
 	.eint_hw = &mt6765_eint_hw,
 	.gpio_m = 0,
-	.ies_present = true,
 	.base_names = mt6765_pinctrl_register_base_names,
 	.nbase_names = ARRAY_SIZE(mt6765_pinctrl_register_base_names),
-	.bias_disable_set = mtk_pinconf_bias_disable_set,
-	.bias_disable_get = mtk_pinconf_bias_disable_get,
-	.bias_set = mtk_pinconf_bias_set,
-	.bias_get = mtk_pinconf_bias_get,
-	.drive_set = mtk_pinconf_drive_set_rev1,
-	.drive_get = mtk_pinconf_drive_get_rev1,
+	.bias_set_combo = mtk_pinconf_bias_set_combo,
+	.bias_get_combo = mtk_pinconf_bias_get_combo,
+	.drive_set = mtk_pinconf_drive_set_raw,
+	.drive_get = mtk_pinconf_drive_get_raw,
 	.adv_pull_get = mtk_pinconf_adv_pull_get,
 	.adv_pull_set = mtk_pinconf_adv_pull_set,
 };
diff --git a/drivers/pinctrl/mediatek/pinctrl-mt8183.c b/drivers/pinctrl/mediatek/pinctrl-mt8183.c
index 9a74d50..6031833 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mt8183.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mt8183.c
@@ -554,13 +554,10 @@ static const struct mtk_pin_soc mt8183_data = {
 	.ngrps = ARRAY_SIZE(mtk_pins_mt8183),
 	.eint_hw = &mt8183_eint_hw,
 	.gpio_m = 0,
-	.ies_present = true,
 	.base_names = mt8183_pinctrl_register_base_names,
 	.nbase_names = ARRAY_SIZE(mt8183_pinctrl_register_base_names),
-	.bias_disable_set = mtk_pinconf_bias_disable_set_rev1,
-	.bias_disable_get = mtk_pinconf_bias_disable_get_rev1,
-	.bias_set = mtk_pinconf_bias_set_rev1,
-	.bias_get = mtk_pinconf_bias_get_rev1,
+	.bias_set_combo = mtk_pinconf_bias_set_combo,
+	.bias_get_combo = mtk_pinconf_bias_get_combo,
 	.drive_set = mtk_pinconf_drive_set_rev1,
 	.drive_get = mtk_pinconf_drive_get_rev1,
 	.adv_pull_get = mtk_pinconf_adv_pull_get,
diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
index 20e1c89..d3169a8 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
@@ -6,6 +6,7 @@
  *
  */
 
+#include <dt-bindings/pinctrl/mt65xx.h>
 #include <linux/device.h>
 #include <linux/err.h>
 #include <linux/gpio/driver.h>
@@ -66,34 +67,44 @@ static int mtk_hw_pin_field_lookup(struct mtk_pinctrl *hw,
 				   const struct mtk_pin_desc *desc,
 				   int field, struct mtk_pin_field *pfd)
 {
-	const struct mtk_pin_field_calc *c, *e;
+	const struct mtk_pin_field_calc *c;
 	const struct mtk_pin_reg_calc *rc;
+	int start = 0, end, check;
+	bool found = false;
 	u32 bits;
 
 	if (hw->soc->reg_cal && hw->soc->reg_cal[field].range) {
 		rc = &hw->soc->reg_cal[field];
 	} else {
 		dev_dbg(hw->dev,
-			"Not support field %d for pin %d (%s)\n",
-			field, desc->number, desc->name);
+			"Not support field %d for this soc\n", field);
 		return -ENOTSUPP;
 	}
 
-	c = rc->range;
-	e = c + rc->nranges;
+	end = rc->nranges - 1;
 
-	while (c < e) {
-		if (desc->number >= c->s_pin && desc->number <= c->e_pin)
+	while (start <= end) {
+		check = (start + end) >> 1;
+		if (desc->number >= rc->range[check].s_pin
+		 && desc->number <= rc->range[check].e_pin) {
+			found = true;
 			break;
-		c++;
+		} else if (start == end)
+			break;
+		else if (desc->number < rc->range[check].s_pin)
+			end = check - 1;
+		else
+			start = check + 1;
 	}
 
-	if (c >= e) {
+	if (!found) {
 		dev_dbg(hw->dev, "Not support field %d for pin = %d (%s)\n",
 			field, desc->number, desc->name);
 		return -ENOTSUPP;
 	}
 
+	c = rc->range + check;
+
 	if (c->i_base > hw->nbase - 1) {
 		dev_err(hw->dev,
 			"Invalid base for field %d for pin = %d (%s)\n",
@@ -182,6 +193,9 @@ int mtk_hw_set_value(struct mtk_pinctrl *hw, const struct mtk_pin_desc *desc,
 	if (err)
 		return err;
 
+	if (value < 0 || value > pf.mask)
+		return -EINVAL;
+
 	if (!pf.next)
 		mtk_rmw(hw, pf.index, pf.offset, pf.mask << pf.bitpos,
 			(value & pf.mask) << pf.bitpos);
@@ -502,6 +516,226 @@ int mtk_pinconf_bias_get_rev1(struct mtk_pinctrl *hw,
 	return 0;
 }
 
+/* Combo for the following pull register type:
+ * 1. PU + PD
+ * 2. PULLSEL + PULLEN
+ * 3. PUPD + R0 + R1
+ */
+static int mtk_pinconf_bias_set_pu_pd(struct mtk_pinctrl *hw,
+				const struct mtk_pin_desc *desc,
+				u32 pullup, u32 arg)
+{
+	int err, pu, pd;
+
+	if (arg == MTK_DISABLE) {
+		pu = 0;
+		pd = 0;
+	} else if ((arg == MTK_ENABLE) && pullup) {
+		pu = 1;
+		pd = 0;
+	} else if ((arg == MTK_ENABLE) && !pullup) {
+		pu = 0;
+		pd = 1;
+	} else {
+		err = -EINVAL;
+		goto out;
+	}
+
+	err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_PU, pu);
+	if (err)
+		goto out;
+
+	err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_PD, pd);
+
+out:
+	return err;
+}
+
+static int mtk_pinconf_bias_set_pullsel_pullen(struct mtk_pinctrl *hw,
+				const struct mtk_pin_desc *desc,
+				u32 pullup, u32 arg)
+{
+	int err, enable;
+
+	if (arg == MTK_DISABLE)
+		enable = 0;
+	else if (arg == MTK_ENABLE)
+		enable = 1;
+	else {
+		err = -EINVAL;
+		goto out;
+	}
+
+	err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_PULLEN, enable);
+	if (err)
+		goto out;
+
+	err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_PULLSEL, pullup);
+
+out:
+	return err;
+}
+
+static int mtk_pinconf_bias_set_pupd_r1_r0(struct mtk_pinctrl *hw,
+				const struct mtk_pin_desc *desc,
+				u32 pullup, u32 arg)
+{
+	int err, r0, r1;
+
+	if ((arg == MTK_DISABLE) || (arg == MTK_PUPD_SET_R1R0_00)) {
+		pullup = 0;
+		r0 = 0;
+		r1 = 0;
+	} else if (arg == MTK_PUPD_SET_R1R0_01) {
+		r0 = 1;
+		r1 = 0;
+	} else if (arg == MTK_PUPD_SET_R1R0_10) {
+		r0 = 0;
+		r1 = 1;
+	} else if (arg == MTK_PUPD_SET_R1R0_11) {
+		r0 = 1;
+		r1 = 1;
+	} else {
+		err = -EINVAL;
+		goto out;
+	}
+
+	/* MTK HW PUPD bit: 1 for pull-down, 0 for pull-up */
+	err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_PUPD, !pullup);
+	if (err)
+		goto out;
+
+	err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_R0, r0);
+	if (err)
+		goto out;
+
+	err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_R1, r1);
+
+out:
+	return err;
+}
+
+static int mtk_pinconf_bias_get_pu_pd(struct mtk_pinctrl *hw,
+				const struct mtk_pin_desc *desc,
+				u32 *pullup, u32 *enable)
+{
+	int err, pu, pd;
+
+	err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_PU, &pu);
+	if (err)
+		goto out;
+
+	err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_PD, &pd);
+	if (err)
+		goto out;
+
+	if (pu == 0 && pd == 0) {
+		*pullup = 0;
+		*enable = MTK_DISABLE;
+	} else if (pu == 1 && pd == 0) {
+		*pullup = 1;
+		*enable = MTK_ENABLE;
+	} else if (pu == 0 && pd == 1) {
+		*pullup = 0;
+		*enable = MTK_ENABLE;
+	} else
+		err = -EINVAL;
+
+out:
+	return err;
+}
+
+static int mtk_pinconf_bias_get_pullsel_pullen(struct mtk_pinctrl *hw,
+				const struct mtk_pin_desc *desc,
+				u32 *pullup, u32 *enable)
+{
+	int err;
+
+	err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_PULLSEL, pullup);
+	if (err)
+		goto out;
+
+	err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_PULLEN, enable);
+
+out:
+	return err;
+}
+
+static int mtk_pinconf_bias_get_pupd_r1_r0(struct mtk_pinctrl *hw,
+				const struct mtk_pin_desc *desc,
+				u32 *pullup, u32 *enable)
+{
+	int err, r0, r1;
+
+	err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_PUPD, pullup);
+	if (err)
+		goto out;
+	/* MTK HW PUPD bit: 1 for pull-down, 0 for pull-up */
+	*pullup = !(*pullup);
+
+	err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_R0, &r0);
+	if (err)
+		goto out;
+
+	err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_R1, &r1);
+	if (err)
+		goto out;
+
+	if ((r1 == 0) && (r0 == 0))
+		*enable = MTK_PUPD_SET_R1R0_00;
+	else if ((r1 == 0) && (r0 == 1))
+		*enable = MTK_PUPD_SET_R1R0_01;
+	else if ((r1 == 1) && (r0 == 0))
+		*enable = MTK_PUPD_SET_R1R0_10;
+	else if ((r1 == 1) && (r0 == 1))
+		*enable = MTK_PUPD_SET_R1R0_11;
+	else
+		err = -EINVAL;
+
+out:
+	return err;
+}
+
+int mtk_pinconf_bias_set_combo(struct mtk_pinctrl *hw,
+				const struct mtk_pin_desc *desc,
+				u32 pullup, u32 arg)
+{
+	int err;
+
+	err = mtk_pinconf_bias_set_pu_pd(hw, desc, pullup, arg);
+	if (!err)
+		goto out;
+
+	err = mtk_pinconf_bias_set_pullsel_pullen(hw, desc, pullup, arg);
+	if (!err)
+		goto out;
+
+	err = mtk_pinconf_bias_set_pupd_r1_r0(hw, desc, pullup, arg);
+
+out:
+	return err;
+}
+
+int mtk_pinconf_bias_get_combo(struct mtk_pinctrl *hw,
+			      const struct mtk_pin_desc *desc,
+			      u32 *pullup, u32 *enable)
+{
+	int err;
+
+	err = mtk_pinconf_bias_get_pu_pd(hw, desc, pullup, enable);
+	if (!err)
+		goto out;
+
+	err = mtk_pinconf_bias_get_pullsel_pullen(hw, desc, pullup, enable);
+	if (!err)
+		goto out;
+
+	err = mtk_pinconf_bias_get_pupd_r1_r0(hw, desc, pullup, enable);
+
+out:
+	return err;
+}
+
 /* Revision 0 */
 int mtk_pinconf_drive_set(struct mtk_pinctrl *hw,
 			  const struct mtk_pin_desc *desc, u32 arg)
@@ -593,6 +827,18 @@ int mtk_pinconf_drive_get_rev1(struct mtk_pinctrl *hw,
 	return 0;
 }
 
+int mtk_pinconf_drive_set_raw(struct mtk_pinctrl *hw,
+			       const struct mtk_pin_desc *desc, u32 arg)
+{
+	return mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DRV, arg);
+}
+
+int mtk_pinconf_drive_get_raw(struct mtk_pinctrl *hw,
+			       const struct mtk_pin_desc *desc, int *val)
+{
+	return mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DRV, val);
+}
+
 int mtk_pinconf_adv_pull_set(struct mtk_pinctrl *hw,
 			     const struct mtk_pin_desc *desc, bool pullup,
 			     u32 arg)
diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
index 1b7da42..27df087 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
@@ -216,6 +216,11 @@ struct mtk_pin_soc {
 	int (*bias_get)(struct mtk_pinctrl *hw,
 			const struct mtk_pin_desc *desc, bool pullup, int *res);
 
+	int (*bias_set_combo)(struct mtk_pinctrl *hw,
+			const struct mtk_pin_desc *desc, u32 pullup, u32 arg);
+	int (*bias_get_combo)(struct mtk_pinctrl *hw,
+			const struct mtk_pin_desc *desc, u32 *pullup, u32 *arg);
+
 	int (*drive_set)(struct mtk_pinctrl *hw,
 			 const struct mtk_pin_desc *desc, u32 arg);
 	int (*drive_get)(struct mtk_pinctrl *hw,
@@ -277,6 +282,12 @@ int mtk_pinconf_bias_set_rev1(struct mtk_pinctrl *hw,
 int mtk_pinconf_bias_get_rev1(struct mtk_pinctrl *hw,
 			      const struct mtk_pin_desc *desc, bool pullup,
 			      int *res);
+int mtk_pinconf_bias_set_combo(struct mtk_pinctrl *hw,
+				const struct mtk_pin_desc *desc,
+				u32 pullup, u32 enable);
+int mtk_pinconf_bias_get_combo(struct mtk_pinctrl *hw,
+			      const struct mtk_pin_desc *desc,
+			      u32 *pullup, u32 *enable);
 
 int mtk_pinconf_drive_set(struct mtk_pinctrl *hw,
 			  const struct mtk_pin_desc *desc, u32 arg);
@@ -288,6 +299,11 @@ int mtk_pinconf_drive_set_rev1(struct mtk_pinctrl *hw,
 int mtk_pinconf_drive_get_rev1(struct mtk_pinctrl *hw,
 			       const struct mtk_pin_desc *desc, int *val);
 
+int mtk_pinconf_drive_set_raw(struct mtk_pinctrl *hw,
+			       const struct mtk_pin_desc *desc, u32 arg);
+int mtk_pinconf_drive_get_raw(struct mtk_pinctrl *hw,
+			       const struct mtk_pin_desc *desc, int *val);
+
 int mtk_pinconf_adv_pull_set(struct mtk_pinctrl *hw,
 			     const struct mtk_pin_desc *desc, bool pullup,
 			     u32 arg);
diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
index 67f8444..a02ad10e 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
@@ -804,7 +804,10 @@ static int mtk_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
 		pctl->devdata->spec_dir_set(&reg_addr, offset);
 
 	regmap_read(pctl->regmap1, reg_addr, &read_val);
-	return !(read_val & bit);
+	if (read_val & bit)
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
 }
 
 static int mtk_gpio_get(struct gpio_chip *chip, unsigned offset)
diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.c b/drivers/pinctrl/mediatek/pinctrl-paris.c
index 923264d..3853ec3 100644
--- a/drivers/pinctrl/mediatek/pinctrl-paris.c
+++ b/drivers/pinctrl/mediatek/pinctrl-paris.c
@@ -78,93 +78,88 @@ static int mtk_pinconf_get(struct pinctrl_dev *pctldev,
 {
 	struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
 	u32 param = pinconf_to_config_param(*config);
-	int val, val2, err, reg, ret = 1;
+	int pullup, err, reg, ret = 1;
 	const struct mtk_pin_desc *desc;
 
+	if (pin >= hw->soc->npins) {
+		err = -EINVAL;
+		goto out;
+	}
 	desc = (const struct mtk_pin_desc *)&hw->soc->pins[pin];
 
 	switch (param) {
 	case PIN_CONFIG_BIAS_DISABLE:
-		if (hw->soc->bias_disable_get) {
-			err = hw->soc->bias_disable_get(hw, desc, &ret);
-			if (err)
-				return err;
-		} else {
-			return -ENOTSUPP;
-		}
-		break;
 	case PIN_CONFIG_BIAS_PULL_UP:
-		if (hw->soc->bias_get) {
-			err = hw->soc->bias_get(hw, desc, 1, &ret);
-			if (err)
-				return err;
-		} else {
-			return -ENOTSUPP;
-		}
-		break;
 	case PIN_CONFIG_BIAS_PULL_DOWN:
-		if (hw->soc->bias_get) {
-			err = hw->soc->bias_get(hw, desc, 0, &ret);
+		if (hw->soc->bias_get_combo) {
+			err = hw->soc->bias_get_combo(hw, desc, &pullup, &ret);
 			if (err)
-				return err;
-		} else {
-			return -ENOTSUPP;
-		}
-		break;
-	case PIN_CONFIG_SLEW_RATE:
-		err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_SR, &val);
-		if (err)
-			return err;
-
-		if (!val)
-			return -EINVAL;
-
-		break;
-	case PIN_CONFIG_INPUT_ENABLE:
-	case PIN_CONFIG_OUTPUT_ENABLE:
-		err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DIR, &val);
-		if (err)
-			return err;
-
-		/* HW takes input mode as zero; output mode as non-zero */
-		if ((val && param == PIN_CONFIG_INPUT_ENABLE) ||
-		    (!val && param == PIN_CONFIG_OUTPUT_ENABLE))
-			return -EINVAL;
-
-		break;
-	case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
-		err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DIR, &val);
-		if (err)
-			return err;
-
-		err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_SMT, &val2);
-		if (err)
-			return err;
-
-		if (val || !val2)
-			return -EINVAL;
-
-		break;
-	case PIN_CONFIG_DRIVE_STRENGTH:
-		if (hw->soc->drive_get) {
-			err = hw->soc->drive_get(hw, desc, &ret);
-			if (err)
-				return err;
+				goto out;
+			if (param == PIN_CONFIG_BIAS_DISABLE) {
+				if (ret == MTK_PUPD_SET_R1R0_00)
+					ret = MTK_DISABLE;
+			} else if (param == PIN_CONFIG_BIAS_PULL_UP) {
+				/* When desire to get pull-up value, return
+				 *  error if current setting is pull-down
+				 */
+				if (!pullup)
+					err = -EINVAL;
+			} else if (param == PIN_CONFIG_BIAS_PULL_DOWN) {
+				/* When desire to get pull-down value, return
+				 *  error if current setting is pull-up
+				 */
+				if (pullup)
+					err = -EINVAL;
+			}
 		} else {
 			err = -ENOTSUPP;
 		}
 		break;
+	case PIN_CONFIG_SLEW_RATE:
+		err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_SR, &ret);
+		break;
+	case PIN_CONFIG_INPUT_ENABLE:
+	case PIN_CONFIG_OUTPUT_ENABLE:
+		err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DIR, &ret);
+		if (err)
+			goto out;
+		/*     CONFIG     Current direction return value
+		 * -------------  ----------------- ----------------------
+		 * OUTPUT_ENABLE       output       1 (= HW value)
+		 *                     input        0 (= HW value)
+		 * INPUT_ENABLE        output       0 (= reverse HW value)
+		 *                     input        1 (= reverse HW value)
+		 */
+		if (param == PIN_CONFIG_INPUT_ENABLE)
+			ret = !ret;
+
+		break;
+	case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
+		err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DIR, &ret);
+		if (err)
+			goto out;
+		/* return error when in output mode
+		 * because schmitt trigger only work in input mode
+		 */
+		if (ret) {
+			err = -EINVAL;
+			goto out;
+		}
+
+		err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_SMT, &ret);
+
+		break;
+	case PIN_CONFIG_DRIVE_STRENGTH:
+		if (hw->soc->drive_get)
+			err = hw->soc->drive_get(hw, desc, &ret);
+		else
+			err = -ENOTSUPP;
+		break;
 	case MTK_PIN_CONFIG_TDSEL:
 	case MTK_PIN_CONFIG_RDSEL:
 		reg = (param == MTK_PIN_CONFIG_TDSEL) ?
 		       PINCTRL_PIN_REG_TDSEL : PINCTRL_PIN_REG_RDSEL;
-
-		err = mtk_hw_get_value(hw, desc, reg, &val);
-		if (err)
-			return err;
-
-		ret = val;
-
+		err = mtk_hw_get_value(hw, desc, reg, &ret);
 		break;
 	case MTK_PIN_CONFIG_PU_ADV:
 	case MTK_PIN_CONFIG_PD_ADV:
@@ -173,28 +168,24 @@ static int mtk_pinconf_get(struct pinctrl_dev *pctldev,
 
 			pullup = param == MTK_PIN_CONFIG_PU_ADV;
 			err = hw->soc->adv_pull_get(hw, desc, pullup, &ret);
-			if (err)
-				return err;
-		} else {
-			return -ENOTSUPP;
-		}
+		} else
+			err = -ENOTSUPP;
 		break;
 	case MTK_PIN_CONFIG_DRV_ADV:
-		if (hw->soc->adv_drive_get) {
+		if (hw->soc->adv_drive_get)
 			err = hw->soc->adv_drive_get(hw, desc, &ret);
-			if (err)
-				return err;
-		} else {
-			return -ENOTSUPP;
-		}
+		else
+			err = -ENOTSUPP;
 		break;
 	default:
-		return -ENOTSUPP;
+		err = -ENOTSUPP;
 	}
 
-	*config = pinconf_to_config_packed(param, ret);
+out:
+	if (!err)
+		*config = pinconf_to_config_packed(param, ret);
 
-	return 0;
+	return err;
 }
 
 static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
@@ -206,64 +197,55 @@ static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
 	int err = 0;
 	u32 reg;
 
+	if (pin >= hw->soc->npins) {
+		err = -EINVAL;
+		goto err;
+	}
 	desc = (const struct mtk_pin_desc *)&hw->soc->pins[pin];
 
 	switch ((u32)param) {
 	case PIN_CONFIG_BIAS_DISABLE:
-		if (hw->soc->bias_disable_set) {
-			err = hw->soc->bias_disable_set(hw, desc);
-			if (err)
-				return err;
-		} else {
-			return -ENOTSUPP;
-		}
+		if (hw->soc->bias_set_combo)
+			err = hw->soc->bias_set_combo(hw, desc, 0, MTK_DISABLE);
+		else
+			err = -ENOTSUPP;
 		break;
 	case PIN_CONFIG_BIAS_PULL_UP:
-		if (hw->soc->bias_set) {
-			err = hw->soc->bias_set(hw, desc, 1);
-			if (err)
-				return err;
-		} else {
-			return -ENOTSUPP;
-		}
+		if (hw->soc->bias_set_combo)
+			err = hw->soc->bias_set_combo(hw, desc, 1, arg);
+		else
+			err = -ENOTSUPP;
 		break;
 	case PIN_CONFIG_BIAS_PULL_DOWN:
-		if (hw->soc->bias_set) {
-			err = hw->soc->bias_set(hw, desc, 0);
-			if (err)
-				return err;
-		} else {
-			return -ENOTSUPP;
-		}
+		if (hw->soc->bias_set_combo)
+			err = hw->soc->bias_set_combo(hw, desc, 0, arg);
+		else
+			err = -ENOTSUPP;
 		break;
 	case PIN_CONFIG_OUTPUT_ENABLE:
 		err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_SMT,
 				       MTK_DISABLE);
-		if (err)
+		/* Keep set direction to consider the case that a GPIO pin
+		 *  does not have SMT control
+		 */
+		if (err != -ENOTSUPP)
 			goto err;
 
 		err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR,
 				       MTK_OUTPUT);
-		if (err)
-			goto err;
 		break;
 	case PIN_CONFIG_INPUT_ENABLE:
-		if (hw->soc->ies_present) {
-			mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_IES,
-					 MTK_ENABLE);
-		}
+		/* regard all non-zero value as enable */
+		err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_IES, !!arg);
+		if (err)
+			goto err;
 
 		err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR,
 				       MTK_INPUT);
-		if (err)
-			goto err;
 		break;
 	case PIN_CONFIG_SLEW_RATE:
-		err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_SR,
-				       arg);
-		if (err)
-			goto err;
-
+		/* regard all non-zero value as enable */
+		err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_SR, !!arg);
 		break;
 	case PIN_CONFIG_OUTPUT:
 		err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR,
@@ -273,41 +255,29 @@ static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
 
 		err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DO,
 				       arg);
-		if (err)
-			goto err;
 		break;
+	case PIN_CONFIG_INPUT_SCHMITT:
 	case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
 		/* arg = 1: Input mode & SMT enable ;
 		 * arg = 0: Output mode & SMT disable
 		 */
-		arg = arg ? 2 : 1;
-		err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR,
-				       arg & 1);
+		err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR, !arg);
 		if (err)
 			goto err;
 
-		err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_SMT,
-				       !!(arg & 2));
-		if (err)
-			goto err;
+		err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_SMT, !!arg);
 		break;
 	case PIN_CONFIG_DRIVE_STRENGTH:
-		if (hw->soc->drive_set) {
+		if (hw->soc->drive_set)
 			err = hw->soc->drive_set(hw, desc, arg);
-			if (err)
-				return err;
-		} else {
-			return -ENOTSUPP;
-		}
+		else
+			err = -ENOTSUPP;
 		break;
 	case MTK_PIN_CONFIG_TDSEL:
 	case MTK_PIN_CONFIG_RDSEL:
 		reg = (param == MTK_PIN_CONFIG_TDSEL) ?
 		       PINCTRL_PIN_REG_TDSEL : PINCTRL_PIN_REG_RDSEL;
-
 		err = mtk_hw_set_value(hw, desc, reg, arg);
-		if (err)
-			goto err;
 		break;
 	case MTK_PIN_CONFIG_PU_ADV:
 	case MTK_PIN_CONFIG_PD_ADV:
@@ -317,20 +287,14 @@ static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
 			pullup = param == MTK_PIN_CONFIG_PU_ADV;
 			err = hw->soc->adv_pull_set(hw, desc, pullup,
 						    arg);
-			if (err)
-				return err;
-		} else {
-			return -ENOTSUPP;
-		}
+		} else
+			err = -ENOTSUPP;
 		break;
 	case MTK_PIN_CONFIG_DRV_ADV:
-		if (hw->soc->adv_drive_set) {
+		if (hw->soc->adv_drive_set)
 			err = hw->soc->adv_drive_set(hw, desc, arg);
-			if (err)
-				return err;
-		} else {
-			return -ENOTSUPP;
-		}
+		else
+			err = -ENOTSUPP;
 		break;
 	default:
 		err = -ENOTSUPP;
@@ -575,12 +539,120 @@ static int mtk_pctrl_get_group_pins(struct pinctrl_dev *pctldev,
 	return 0;
 }
 
+static int mtk_hw_get_value_wrap(struct mtk_pinctrl *hw, unsigned int gpio, int field)
+{
+	const struct mtk_pin_desc *desc;
+	int value, err;
+
+	if (gpio >= hw->soc->npins)
+		return -EINVAL;
+
+	desc = (const struct mtk_pin_desc *)&hw->soc->pins[gpio];
+
+	err = mtk_hw_get_value(hw, desc, field, &value);
+	if (err)
+		return err;
+
+	return value;
+}
+
+#define mtk_pctrl_get_pinmux(hw, gpio)			\
+	mtk_hw_get_value_wrap(hw, gpio, PINCTRL_PIN_REG_MODE)
+
+#define mtk_pctrl_get_direction(hw, gpio)		\
+	mtk_hw_get_value_wrap(hw, gpio, PINCTRL_PIN_REG_DIR)
+
+#define mtk_pctrl_get_out(hw, gpio)			\
+	mtk_hw_get_value_wrap(hw, gpio, PINCTRL_PIN_REG_DO)
+
+#define mtk_pctrl_get_in(hw, gpio)			\
+	mtk_hw_get_value_wrap(hw, gpio, PINCTRL_PIN_REG_DI)
+
+#define mtk_pctrl_get_smt(hw, gpio)			\
+	mtk_hw_get_value_wrap(hw, gpio, PINCTRL_PIN_REG_SMT)
+
+#define mtk_pctrl_get_ies(hw, gpio)			\
+	mtk_hw_get_value_wrap(hw, gpio, PINCTRL_PIN_REG_IES)
+
+#define mtk_pctrl_get_driving(hw, gpio)			\
+	mtk_hw_get_value_wrap(hw, gpio, PINCTRL_PIN_REG_DRV)
+
+ssize_t mtk_pctrl_show_one_pin(struct mtk_pinctrl *hw,
+	unsigned int gpio, char *buf, unsigned int bufLen)
+{
+	int pinmux, pullup, pullen, len = 0, r1 = -1, r0 = -1;
+	const struct mtk_pin_desc *desc;
+
+	if (gpio >= hw->soc->npins)
+		return -EINVAL;
+
+	desc = (const struct mtk_pin_desc *)&hw->soc->pins[gpio];
+	pinmux = mtk_pctrl_get_pinmux(hw, gpio);
+	if (pinmux >= hw->soc->nfuncs)
+		pinmux -= hw->soc->nfuncs;
+
+	mtk_pinconf_bias_get_combo(hw, desc, &pullup, &pullen);
+	if (pullen == MTK_PUPD_SET_R1R0_00) {
+		pullen = 0;
+		r1 = 0;
+		r0 = 0;
+	} else if (pullen == MTK_PUPD_SET_R1R0_01) {
+		pullen = 1;
+		r1 = 0;
+		r0 = 1;
+	} else if (pullen == MTK_PUPD_SET_R1R0_10) {
+		pullen = 1;
+		r1 = 1;
+		r0 = 0;
+	} else if (pullen == MTK_PUPD_SET_R1R0_11) {
+		pullen = 1;
+		r1 = 1;
+		r0 = 1;
+	} else if (pullen != MTK_DISABLE && pullen != MTK_ENABLE) {
+		pullen = 0;
+	}
+	len += scnprintf(buf + len, bufLen - len,
+			"%03d: %1d%1d%1d%1d%02d%1d%1d%1d%1d",
+			gpio,
+			pinmux,
+			mtk_pctrl_get_direction(hw, gpio),
+			mtk_pctrl_get_out(hw, gpio),
+			mtk_pctrl_get_in(hw, gpio),
+			mtk_pctrl_get_driving(hw, gpio),
+			mtk_pctrl_get_smt(hw, gpio),
+			mtk_pctrl_get_ies(hw, gpio),
+			pullen,
+			pullup);
+
+	if (r1 != -1) {
+		len += scnprintf(buf + len, bufLen - len, " (%1d %1d)\n",
+			r1, r0);
+	} else {
+		len += scnprintf(buf + len, bufLen - len, "\n");
+	}
+
+	return len;
+}
+
+#define PIN_DBG_BUF_SZ 96
+static void mtk_pctrl_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s,
+			  unsigned int gpio)
+{
+	struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
+	char buf[PIN_DBG_BUF_SZ];
+
+	(void)mtk_pctrl_show_one_pin(hw, gpio, buf, PIN_DBG_BUF_SZ);
+
+	seq_printf(s, "%s", buf);
+}
+
 static const struct pinctrl_ops mtk_pctlops = {
 	.dt_node_to_map		= mtk_pctrl_dt_node_to_map,
 	.dt_free_map		= pinctrl_utils_free_map,
 	.get_groups_count	= mtk_pctrl_get_groups_count,
 	.get_group_name		= mtk_pctrl_get_group_name,
 	.get_group_pins		= mtk_pctrl_get_group_pins,
+	.pin_dbg_show           = mtk_pctrl_dbg_show,
 };
 
 static int mtk_pmx_get_funcs_cnt(struct pinctrl_dev *pctldev)
@@ -677,6 +749,7 @@ static const struct pinconf_ops mtk_confops = {
 	.pin_config_get = mtk_pinconf_get,
 	.pin_config_group_get	= mtk_pconf_group_get,
 	.pin_config_group_set	= mtk_pconf_group_set,
+	.is_generic = true,
 };
 
 static struct pinctrl_desc mtk_desc = {
@@ -693,13 +766,19 @@ static int mtk_gpio_get_direction(struct gpio_chip *chip, unsigned int gpio)
 	const struct mtk_pin_desc *desc;
 	int value, err;
 
+	if (gpio >= hw->soc->npins)
+		return -EINVAL;
+
 	desc = (const struct mtk_pin_desc *)&hw->soc->pins[gpio];
 
 	err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DIR, &value);
 	if (err)
 		return err;
 
-	return !value;
+	if (value)
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
 }
 
 static int mtk_gpio_get(struct gpio_chip *chip, unsigned int gpio)
@@ -708,6 +787,9 @@ static int mtk_gpio_get(struct gpio_chip *chip, unsigned int gpio)
 	const struct mtk_pin_desc *desc;
 	int value, err;
 
+	if (gpio >= hw->soc->npins)
+		return -EINVAL;
+
 	desc = (const struct mtk_pin_desc *)&hw->soc->pins[gpio];
 
 	err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DI, &value);
@@ -722,6 +804,9 @@ static void mtk_gpio_set(struct gpio_chip *chip, unsigned int gpio, int value)
 	struct mtk_pinctrl *hw = gpiochip_get_data(chip);
 	const struct mtk_pin_desc *desc;
 
+	if (gpio >= hw->soc->npins)
+		return;
+
 	desc = (const struct mtk_pin_desc *)&hw->soc->pins[gpio];
 
 	mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DO, !!value);
@@ -729,12 +814,22 @@ static void mtk_gpio_set(struct gpio_chip *chip, unsigned int gpio, int value)
 
 static int mtk_gpio_direction_input(struct gpio_chip *chip, unsigned int gpio)
 {
+	struct mtk_pinctrl *hw = gpiochip_get_data(chip);
+
+	if (gpio >= hw->soc->npins)
+		return -EINVAL;
+
 	return pinctrl_gpio_direction_input(chip->base + gpio);
 }
 
 static int mtk_gpio_direction_output(struct gpio_chip *chip, unsigned int gpio,
 				     int value)
 {
+	struct mtk_pinctrl *hw = gpiochip_get_data(chip);
+
+	if (gpio >= hw->soc->npins)
+		return -EINVAL;
+
 	mtk_gpio_set(chip, gpio, value);
 
 	return pinctrl_gpio_direction_output(chip->base + gpio);
diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.h b/drivers/pinctrl/mediatek/pinctrl-paris.h
index 3d43771..afb7650 100644
--- a/drivers/pinctrl/mediatek/pinctrl-paris.h
+++ b/drivers/pinctrl/mediatek/pinctrl-paris.h
@@ -60,6 +60,9 @@
 int mtk_paris_pinctrl_probe(struct platform_device *pdev,
 			    const struct mtk_pin_soc *soc);
 
+ssize_t mtk_pctrl_show_one_pin(struct mtk_pinctrl *hw,
+	unsigned int gpio, char *buf, unsigned int bufLen);
+
 extern const struct dev_pm_ops mtk_paris_pinctrl_pm_ops;
 
 #endif /* __PINCTRL_PARIS_H */
diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
index 926b999..d130c63 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
@@ -231,10 +231,24 @@ static const unsigned int hdmi_hpd_pins[]	= { GPIOH_0 };
 static const unsigned int hdmi_sda_pins[]	= { GPIOH_1 };
 static const unsigned int hdmi_scl_pins[]	= { GPIOH_2 };
 
+static const unsigned int tsin_a_d_valid_pins[] = { GPIOY_0 };
+static const unsigned int tsin_a_sop_pins[]	= { GPIOY_1 };
+static const unsigned int tsin_a_clk_pins[]	= { GPIOY_2 };
+static const unsigned int tsin_a_d0_pins[]	= { GPIOY_3 };
+static const unsigned int tsin_a_dp_pins[]	= {
+	GPIOY_4, GPIOY_5, GPIOY_6, GPIOY_7, GPIOY_8, GPIOY_9, GPIOY_10
+};
+
+static const unsigned int tsin_a_fail_pins[]	= { GPIOY_11 };
 static const unsigned int i2s_out_ch23_y_pins[]	= { GPIOY_8 };
 static const unsigned int i2s_out_ch45_y_pins[]	= { GPIOY_9 };
 static const unsigned int i2s_out_ch67_y_pins[]	= { GPIOY_10 };
 
+static const unsigned int tsin_b_d_valid_pins[] = { GPIOX_6 };
+static const unsigned int tsin_b_sop_pins[]	= { GPIOX_7 };
+static const unsigned int tsin_b_clk_pins[]	= { GPIOX_8 };
+static const unsigned int tsin_b_d0_pins[]	= { GPIOX_9 };
+
 static const unsigned int spdif_out_y_pins[]	= { GPIOY_12 };
 
 static const unsigned int gen_clk_out_pins[]	= { GPIOY_15 };
@@ -437,12 +451,22 @@ static struct meson_pmx_group meson_gxbb_periphs_groups[] = {
 	GROUP(pwm_a_x,		3,	17),
 	GROUP(pwm_e,		2,	30),
 	GROUP(pwm_f_x,		3,	18),
+	GROUP(tsin_b_d_valid,	3,	9),
+	GROUP(tsin_b_sop,	3,	8),
+	GROUP(tsin_b_clk,	3,	10),
+	GROUP(tsin_b_d0,	3,	7),
 
 	/* Bank Y */
 	GROUP(uart_cts_c,	1,	17),
 	GROUP(uart_rts_c,	1,	16),
 	GROUP(uart_tx_c,	1,	19),
 	GROUP(uart_rx_c,	1,	18),
+	GROUP(tsin_a_fail,	3,	3),
+	GROUP(tsin_a_d_valid,	3,	2),
+	GROUP(tsin_a_sop,	3,	1),
+	GROUP(tsin_a_clk,	3,	0),
+	GROUP(tsin_a_d0,	3,	4),
+	GROUP(tsin_a_dp,	3,	5),
 	GROUP(pwm_a_y,		1,	21),
 	GROUP(pwm_f_y,		1,	20),
 	GROUP(i2s_out_ch23_y,	1,	5),
@@ -601,6 +625,15 @@ static const char * const gpio_periphs_groups[] = {
 	"GPIOX_20", "GPIOX_21", "GPIOX_22",
 };
 
+static const char * const tsin_a_groups[] = {
+	"tsin_a_clk", "tsin_a_sop", "tsin_a_d_valid", "tsin_a_d0",
+	"tsin_a_dp", "tsin_a_fail",
+};
+
+static const char * const tsin_b_groups[] = {
+	"tsin_b_clk", "tsin_b_sop", "tsin_b_d_valid", "tsin_b_d0",
+};
+
 static const char * const emmc_groups[] = {
 	"emmc_nand_d07", "emmc_clk", "emmc_cmd", "emmc_ds",
 };
@@ -792,6 +825,8 @@ static struct meson_pmx_func meson_gxbb_periphs_functions[] = {
 	FUNCTION(i2s_out),
 	FUNCTION(spdif_out),
 	FUNCTION(gen_clk_out),
+	FUNCTION(tsin_a),
+	FUNCTION(tsin_b),
 };
 
 static struct meson_pmx_func meson_gxbb_aobus_functions[] = {
diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxl.c b/drivers/pinctrl/meson/pinctrl-meson-gxl.c
index 2ac921c8..32552d7 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-gxl.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxl.c
@@ -241,6 +241,17 @@ static const unsigned int tsin_a_dp_pins[] = {
 	GPIODV_1, GPIODV_2, GPIODV_3, GPIODV_4, GPIODV_5, GPIODV_6, GPIODV_7,
 };
 
+static const unsigned int tsin_b_clk_pins[]	= { GPIOH_6 };
+static const unsigned int tsin_b_d0_pins[]	= { GPIOH_7 };
+static const unsigned int tsin_b_sop_pins[]	= { GPIOH_8 };
+static const unsigned int tsin_b_d_valid_pins[] = { GPIOH_9 };
+
+static const unsigned int tsin_b_fail_z4_pins[] = { GPIOZ_4 };
+static const unsigned int tsin_b_clk_z3_pins[]	= { GPIOZ_3 };
+static const unsigned int tsin_b_d0_z2_pins[]	= { GPIOZ_2 };
+static const unsigned int tsin_b_sop_z1_pins[]	= { GPIOZ_1 };
+static const unsigned int tsin_b_d_valid_z0_pins[] = { GPIOZ_0 };
+
 static const struct pinctrl_pin_desc meson_gxl_aobus_pins[] = {
 	MESON_PIN(GPIOAO_0),
 	MESON_PIN(GPIOAO_1),
@@ -438,6 +449,11 @@ static struct meson_pmx_group meson_gxl_periphs_groups[] = {
 	GROUP(eth_txd1,		4,	12),
 	GROUP(eth_txd2,		4,	11),
 	GROUP(eth_txd3,		4,	10),
+	GROUP(tsin_b_fail_z4,	3,	15),
+	GROUP(tsin_b_clk_z3,	3,	16),
+	GROUP(tsin_b_d0_z2,	3,	17),
+	GROUP(tsin_b_sop_z1,	3,	18),
+	GROUP(tsin_b_d_valid_z0, 3,	19),
 	GROUP(pwm_c,		3,	20),
 	GROUP(i2s_out_ch23_z,	3,	26),
 	GROUP(i2s_out_ch45_z,	3,	25),
@@ -454,6 +470,10 @@ static struct meson_pmx_group meson_gxl_periphs_groups[] = {
 	GROUP(i2s_out_lr_clk,	6,	24),
 	GROUP(i2s_out_ch01,	6,	23),
 	GROUP(spdif_out_h,	6,	28),
+	GROUP(tsin_b_d0,	6,	17),
+	GROUP(tsin_b_sop,	6,	18),
+	GROUP(tsin_b_d_valid,	6,	19),
+	GROUP(tsin_b_clk,	6,	20),
 
 	/* Bank DV */
 	GROUP(uart_tx_b,	2,	16),
@@ -689,6 +709,12 @@ static const char * const tsin_a_groups[] = {
 	"tsin_a_dp", "tsin_a_fail",
 };
 
+static const char * const tsin_b_groups[] = {
+	"tsin_b_clk", "tsin_b_sop", "tsin_b_d_valid", "tsin_b_d0",
+	"tsin_b_clk_z3", "tsin_b_sop_z1", "tsin_b_d_valid_z0", "tsin_b_d0_z2",
+	"tsin_b_fail_z4",
+};
+
 static const char * const gpio_aobus_groups[] = {
 	"GPIOAO_0", "GPIOAO_1", "GPIOAO_2", "GPIOAO_3", "GPIOAO_4",
 	"GPIOAO_5", "GPIOAO_6", "GPIOAO_7", "GPIOAO_8", "GPIOAO_9",
@@ -764,6 +790,7 @@ static struct meson_pmx_func meson_gxl_periphs_functions[] = {
 	FUNCTION(spdif_out),
 	FUNCTION(eth_led),
 	FUNCTION(tsin_a),
+	FUNCTION(tsin_b),
 };
 
 static struct meson_pmx_func meson_gxl_aobus_functions[] = {
diff --git a/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c b/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
index 243fba2..5f125bd 100644
--- a/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
+++ b/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
@@ -15,6 +15,7 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
+#include <linux/of_irq.h>
 #include <linux/pinctrl/pinconf-generic.h>
 #include <linux/pinctrl/pinconf.h>
 #include <linux/pinctrl/pinctrl.h>
@@ -402,7 +403,10 @@ static int armada_37xx_gpio_get_direction(struct gpio_chip *chip,
 	mask = BIT(offset);
 	regmap_read(info->regmap, reg, &val);
 
-	return !(val & mask);
+	if (val & mask)
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
 }
 
 static int armada_37xx_gpio_direction_output(struct gpio_chip *chip,
@@ -738,14 +742,7 @@ static int armada_37xx_irqchip_register(struct platform_device *pdev,
 		return ret;
 	}
 
-	nr_irq_parent = platform_irq_count(pdev);
-	if (nr_irq_parent < 0) {
-		if (nr_irq_parent != -EPROBE_DEFER)
-			dev_err(dev, "Couldn't determine irq count: %pe\n",
-				ERR_PTR(nr_irq_parent));
-		return nr_irq_parent;
-	}
-
+	nr_irq_parent = of_irq_count(np);
 	spin_lock_init(&info->irq_lock);
 
 	if (!nr_irq_parent) {
@@ -782,7 +779,7 @@ static int armada_37xx_irqchip_register(struct platform_device *pdev,
 	if (!girq->parents)
 		return -ENOMEM;
 	for (i = 0; i < nr_irq_parent; i++) {
-		int irq = platform_get_irq(pdev, i);
+		int irq = irq_of_parse_and_map(np, i);
 
 		if (irq < 0)
 			continue;
diff --git a/drivers/pinctrl/nomadik/pinctrl-nomadik.c b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
index 95f864d..ca7bbe4 100644
--- a/drivers/pinctrl/nomadik/pinctrl-nomadik.c
+++ b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
@@ -831,11 +831,14 @@ static int nmk_gpio_get_dir(struct gpio_chip *chip, unsigned offset)
 
 	clk_enable(nmk_chip->clk);
 
-	dir = !(readl(nmk_chip->addr + NMK_GPIO_DIR) & BIT(offset));
+	dir = readl(nmk_chip->addr + NMK_GPIO_DIR) & BIT(offset);
 
 	clk_disable(nmk_chip->clk);
 
-	return dir;
+	if (dir)
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
 }
 
 static int nmk_gpio_make_input(struct gpio_chip *chip, unsigned offset)
diff --git a/drivers/pinctrl/pinconf-generic.c b/drivers/pinctrl/pinconf-generic.c
index 9eb8630..dfef471 100644
--- a/drivers/pinctrl/pinconf-generic.c
+++ b/drivers/pinctrl/pinconf-generic.c
@@ -286,6 +286,7 @@ int pinconf_generic_parse_dt_config(struct device_node *np,
 	kfree(cfg);
 	return ret;
 }
+EXPORT_SYMBOL_GPL(pinconf_generic_parse_dt_config);
 
 int pinconf_generic_dt_subnode_to_map(struct pinctrl_dev *pctldev,
 		struct device_node *np, struct pinctrl_map **map,
diff --git a/drivers/pinctrl/pinctrl-amd.c b/drivers/pinctrl/pinctrl-amd.c
index 73aff65..1fe62a3 100644
--- a/drivers/pinctrl/pinctrl-amd.c
+++ b/drivers/pinctrl/pinctrl-amd.c
@@ -46,7 +46,10 @@ static int amd_gpio_get_direction(struct gpio_chip *gc, unsigned offset)
 	pin_reg = readl(gpio_dev->base + offset * 4);
 	raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
 
-	return !(pin_reg & BIT(OUTPUT_ENABLE_OFF));
+	if (pin_reg & BIT(OUTPUT_ENABLE_OFF))
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
 }
 
 static int amd_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
index 207f266..52386ad 100644
--- a/drivers/pinctrl/pinctrl-at91.c
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -1414,7 +1414,10 @@ static int at91_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
 	u32 osr;
 
 	osr = readl_relaxed(pio + PIO_OSR);
-	return !(osr & mask);
+	if (osr & mask)
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
 }
 
 static int at91_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
diff --git a/drivers/pinctrl/pinctrl-axp209.c b/drivers/pinctrl/pinctrl-axp209.c
index be5b645..207cbae 100644
--- a/drivers/pinctrl/pinctrl-axp209.c
+++ b/drivers/pinctrl/pinctrl-axp209.c
@@ -149,13 +149,16 @@ static int axp20x_gpio_get_direction(struct gpio_chip *chip,
 	 * going to change the value soon anyway. Default to output.
 	 */
 	if ((val & AXP20X_GPIO_FUNCTIONS) > 2)
-		return 0;
+		return GPIO_LINE_DIRECTION_OUT;
 
 	/*
 	 * The GPIO directions are the three lowest values.
 	 * 2 is input, 0 and 1 are output
 	 */
-	return val & 2;
+	if (val & 2)
+		return GPIO_LINE_DIRECTION_IN;
+
+	return GPIO_LINE_DIRECTION_OUT;
 }
 
 static int axp20x_gpio_output(struct gpio_chip *chip, unsigned int offset,
diff --git a/drivers/pinctrl/pinctrl-da9062.c b/drivers/pinctrl/pinctrl-da9062.c
new file mode 100644
index 0000000..1c08579
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-da9062.c
@@ -0,0 +1,300 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Dialog DA9062 pinctrl and GPIO driver.
+ * Based on DA9055 GPIO driver.
+ *
+ * TODO:
+ *   - add pinmux and pinctrl support (gpio alternate mode)
+ *
+ * Documents:
+ * [1] https://www.dialog-semiconductor.com/sites/default/files/da9062_datasheet_3v6.pdf
+ *
+ * Copyright (C) 2019 Pengutronix, Marco Felsch <kernel@pengutronix.de>
+ */
+#include <linux/bits.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <linux/gpio/driver.h>
+
+#include <linux/mfd/da9062/core.h>
+#include <linux/mfd/da9062/registers.h>
+
+/*
+ * We need this get the gpio_desc from a <gpio_chip,offset> tuple to decide if
+ * the gpio is active low without a vendor specific dt-binding.
+ */
+#include "../gpio/gpiolib.h"
+
+#define DA9062_TYPE(offset)		(4 * (offset % 2))
+#define DA9062_PIN_SHIFT(offset)	(4 * (offset % 2))
+#define DA9062_PIN_ALTERNATE		0x00 /* gpio alternate mode */
+#define DA9062_PIN_GPI			0x01 /* gpio in */
+#define DA9062_PIN_GPO_OD		0x02 /* gpio out open-drain */
+#define DA9062_PIN_GPO_PP		0x03 /* gpio out push-pull */
+#define DA9062_GPIO_NUM			5
+
+struct da9062_pctl {
+	struct da9062 *da9062;
+	struct gpio_chip gc;
+	unsigned int pin_config[DA9062_GPIO_NUM];
+};
+
+static int da9062_pctl_get_pin_mode(struct da9062_pctl *pctl,
+				    unsigned int offset)
+{
+	struct regmap *regmap = pctl->da9062->regmap;
+	int ret, val;
+
+	ret = regmap_read(regmap, DA9062AA_GPIO_0_1 + (offset >> 1), &val);
+	if (ret < 0)
+		return ret;
+
+	val >>= DA9062_PIN_SHIFT(offset);
+	val &= DA9062AA_GPIO0_PIN_MASK;
+
+	return val;
+}
+
+static int da9062_pctl_set_pin_mode(struct da9062_pctl *pctl,
+				    unsigned int offset, unsigned int mode_req)
+{
+	struct regmap *regmap = pctl->da9062->regmap;
+	unsigned int mode = mode_req;
+	unsigned int mask;
+	int ret;
+
+	mode &= DA9062AA_GPIO0_PIN_MASK;
+	mode <<= DA9062_PIN_SHIFT(offset);
+	mask = DA9062AA_GPIO0_PIN_MASK << DA9062_PIN_SHIFT(offset);
+
+	ret = regmap_update_bits(regmap, DA9062AA_GPIO_0_1 + (offset >> 1),
+				 mask, mode);
+	if (!ret)
+		pctl->pin_config[offset] = mode_req;
+
+	return ret;
+}
+
+static int da9062_gpio_get(struct gpio_chip *gc, unsigned int offset)
+{
+	struct da9062_pctl *pctl = gpiochip_get_data(gc);
+	struct regmap *regmap = pctl->da9062->regmap;
+	int gpio_mode, val;
+	int ret;
+
+	gpio_mode = da9062_pctl_get_pin_mode(pctl, offset);
+	if (gpio_mode < 0)
+		return gpio_mode;
+
+	switch (gpio_mode) {
+	case DA9062_PIN_ALTERNATE:
+		return -ENOTSUPP;
+	case DA9062_PIN_GPI:
+		ret = regmap_read(regmap, DA9062AA_STATUS_B, &val);
+		if (ret < 0)
+			return ret;
+		break;
+	case DA9062_PIN_GPO_OD:
+	case DA9062_PIN_GPO_PP:
+		ret = regmap_read(regmap, DA9062AA_GPIO_MODE0_4, &val);
+		if (ret < 0)
+			return ret;
+	}
+
+	return !!(val & BIT(offset));
+}
+
+static void da9062_gpio_set(struct gpio_chip *gc, unsigned int offset,
+			    int value)
+{
+	struct da9062_pctl *pctl = gpiochip_get_data(gc);
+	struct regmap *regmap = pctl->da9062->regmap;
+
+	regmap_update_bits(regmap, DA9062AA_GPIO_MODE0_4, BIT(offset),
+			   value << offset);
+}
+
+static int da9062_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
+{
+	struct da9062_pctl *pctl = gpiochip_get_data(gc);
+	int gpio_mode;
+
+	gpio_mode = da9062_pctl_get_pin_mode(pctl, offset);
+	if (gpio_mode < 0)
+		return gpio_mode;
+
+	switch (gpio_mode) {
+	case DA9062_PIN_ALTERNATE:
+		return -ENOTSUPP;
+	case DA9062_PIN_GPI:
+		return GPIO_LINE_DIRECTION_IN;
+	case DA9062_PIN_GPO_OD:
+	case DA9062_PIN_GPO_PP:
+		return GPIO_LINE_DIRECTION_OUT;
+	}
+
+	return -EINVAL;
+}
+
+static int da9062_gpio_direction_input(struct gpio_chip *gc,
+				       unsigned int offset)
+{
+	struct da9062_pctl *pctl = gpiochip_get_data(gc);
+	struct regmap *regmap = pctl->da9062->regmap;
+	struct gpio_desc *desc = gpiochip_get_desc(gc, offset);
+	unsigned int gpi_type;
+	int ret;
+
+	ret = da9062_pctl_set_pin_mode(pctl, offset, DA9062_PIN_GPI);
+	if (ret)
+		return ret;
+
+	/*
+	 * If the gpio is active low we should set it in hw too. No worries
+	 * about gpio_get() because we read and return the gpio-level. So the
+	 * gpiolib active_low handling is still correct.
+	 *
+	 * 0 - active low, 1 - active high
+	 */
+	gpi_type = !gpiod_is_active_low(desc);
+
+	return regmap_update_bits(regmap, DA9062AA_GPIO_0_1 + (offset >> 1),
+				DA9062AA_GPIO0_TYPE_MASK << DA9062_TYPE(offset),
+				gpi_type << DA9062_TYPE(offset));
+}
+
+static int da9062_gpio_direction_output(struct gpio_chip *gc,
+					unsigned int offset, int value)
+{
+	struct da9062_pctl *pctl = gpiochip_get_data(gc);
+	unsigned int pin_config = pctl->pin_config[offset];
+	int ret;
+
+	ret = da9062_pctl_set_pin_mode(pctl, offset, pin_config);
+	if (ret)
+		return ret;
+
+	da9062_gpio_set(gc, offset, value);
+
+	return 0;
+}
+
+static int da9062_gpio_set_config(struct gpio_chip *gc, unsigned int offset,
+				  unsigned long config)
+{
+	struct da9062_pctl *pctl = gpiochip_get_data(gc);
+	struct regmap *regmap = pctl->da9062->regmap;
+	int gpio_mode;
+
+	/*
+	 * We need to meet the following restrictions [1, Figure 18]:
+	 * - PIN_CONFIG_BIAS_PULL_DOWN -> only allowed if the pin is used as
+	 *				  gpio input
+	 * - PIN_CONFIG_BIAS_PULL_UP   -> only allowed if the pin is used as
+	 *				  gpio output open-drain.
+	 */
+
+	switch (pinconf_to_config_param(config)) {
+	case PIN_CONFIG_BIAS_DISABLE:
+		return regmap_update_bits(regmap, DA9062AA_CONFIG_K,
+					  BIT(offset), 0);
+	case PIN_CONFIG_BIAS_PULL_DOWN:
+		gpio_mode = da9062_pctl_get_pin_mode(pctl, offset);
+		if (gpio_mode < 0)
+			return -EINVAL;
+		else if (gpio_mode != DA9062_PIN_GPI)
+			return -ENOTSUPP;
+		return regmap_update_bits(regmap, DA9062AA_CONFIG_K,
+					  BIT(offset), BIT(offset));
+	case PIN_CONFIG_BIAS_PULL_UP:
+		gpio_mode = da9062_pctl_get_pin_mode(pctl, offset);
+		if (gpio_mode < 0)
+			return -EINVAL;
+		else if (gpio_mode != DA9062_PIN_GPO_OD)
+			return -ENOTSUPP;
+		return regmap_update_bits(regmap, DA9062AA_CONFIG_K,
+					  BIT(offset), BIT(offset));
+	case PIN_CONFIG_DRIVE_OPEN_DRAIN:
+		return da9062_pctl_set_pin_mode(pctl, offset,
+						DA9062_PIN_GPO_OD);
+	case PIN_CONFIG_DRIVE_PUSH_PULL:
+		return da9062_pctl_set_pin_mode(pctl, offset,
+						DA9062_PIN_GPO_PP);
+	default:
+		return -ENOTSUPP;
+	}
+}
+
+static int da9062_gpio_to_irq(struct gpio_chip *gc, unsigned int offset)
+{
+	struct da9062_pctl *pctl = gpiochip_get_data(gc);
+	struct da9062 *da9062 = pctl->da9062;
+
+	return regmap_irq_get_virq(da9062->regmap_irq,
+				   DA9062_IRQ_GPI0 + offset);
+}
+
+static const struct gpio_chip reference_gc = {
+	.owner = THIS_MODULE,
+	.get = da9062_gpio_get,
+	.set = da9062_gpio_set,
+	.get_direction = da9062_gpio_get_direction,
+	.direction_input = da9062_gpio_direction_input,
+	.direction_output = da9062_gpio_direction_output,
+	.set_config = da9062_gpio_set_config,
+	.to_irq = da9062_gpio_to_irq,
+	.can_sleep = true,
+	.ngpio = DA9062_GPIO_NUM,
+	.base = -1,
+};
+
+static int da9062_pctl_probe(struct platform_device *pdev)
+{
+	struct device *parent = pdev->dev.parent;
+	struct da9062_pctl *pctl;
+	int i;
+
+	pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
+	if (!pctl)
+		return -ENOMEM;
+
+	pctl->da9062 = dev_get_drvdata(parent);
+	if (!pctl->da9062)
+		return -EINVAL;
+
+	if (!device_property_present(parent, "gpio-controller"))
+		return 0;
+
+	for (i = 0; i < ARRAY_SIZE(pctl->pin_config); i++)
+		pctl->pin_config[i] = DA9062_PIN_GPO_PP;
+
+	/*
+	 * Currently the driver handles only the GPIO support. The
+	 * pinctrl/pinmux support can be added later if needed.
+	 */
+	pctl->gc = reference_gc;
+	pctl->gc.label = dev_name(&pdev->dev);
+	pctl->gc.parent = &pdev->dev;
+#ifdef CONFIG_OF_GPIO
+	pctl->gc.of_node = parent->of_node;
+#endif
+
+	platform_set_drvdata(pdev, pctl);
+
+	return devm_gpiochip_add_data(&pdev->dev, &pctl->gc, pctl);
+}
+
+static struct platform_driver da9062_pctl_driver = {
+	.probe = da9062_pctl_probe,
+	.driver = {
+		.name	= "da9062-gpio",
+	},
+};
+module_platform_driver(da9062_pctl_driver);
+
+MODULE_AUTHOR("Marco Felsch <kernel@pengutronix.de>");
+MODULE_DESCRIPTION("DA9062 PMIC pinctrl and GPIO Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:da9062-gpio");
diff --git a/drivers/pinctrl/pinctrl-ingenic.c b/drivers/pinctrl/pinctrl-ingenic.c
index 96f04d1..e5dcf77 100644
--- a/drivers/pinctrl/pinctrl-ingenic.c
+++ b/drivers/pinctrl/pinctrl-ingenic.c
@@ -4,6 +4,7 @@
  *
  * Copyright (c) 2017 Paul Cercueil <paul@crapouillou.net>
  * Copyright (c) 2019 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
+ * Copyright (c) 2017, 2019 Paul Boddie <paul@boddie.org.uk>
  */
 
 #include <linux/compiler.h>
@@ -900,6 +901,7 @@ static int jz4780_mmc0_8bit_a_pins[] = { 0x04, 0x05, 0x06, 0x07, 0x18, };
 static int jz4780_i2c3_pins[] = { 0x6a, 0x6b, };
 static int jz4780_i2c4_e_pins[] = { 0x8c, 0x8d, };
 static int jz4780_i2c4_f_pins[] = { 0xb9, 0xb8, };
+static int jz4780_hdmi_ddc_pins[] = { 0xb9, 0xb8, };
 
 static int jz4780_uart2_data_funcs[] = { 1, 1, };
 static int jz4780_uart2_hwflow_funcs[] = { 1, 1, };
@@ -908,6 +910,7 @@ static int jz4780_mmc0_8bit_a_funcs[] = { 1, 1, 1, 1, 1, };
 static int jz4780_i2c3_funcs[] = { 1, 1, };
 static int jz4780_i2c4_e_funcs[] = { 1, 1, };
 static int jz4780_i2c4_f_funcs[] = { 1, 1, };
+static int jz4780_hdmi_ddc_funcs[] = { 0, 0, };
 
 static const struct group_desc jz4780_groups[] = {
 	INGENIC_PIN_GROUP("uart0-data", jz4770_uart0_data),
@@ -950,6 +953,7 @@ static const struct group_desc jz4780_groups[] = {
 	INGENIC_PIN_GROUP("i2c3-data", jz4780_i2c3),
 	INGENIC_PIN_GROUP("i2c4-data-e", jz4780_i2c4_e),
 	INGENIC_PIN_GROUP("i2c4-data-f", jz4780_i2c4_f),
+	INGENIC_PIN_GROUP("hdmi-ddc", jz4780_hdmi_ddc),
 	INGENIC_PIN_GROUP("cim-data", jz4770_cim_8bit),
 	INGENIC_PIN_GROUP("lcd-24bit", jz4770_lcd_24bit),
 	{ "lcd-no-pins", },
@@ -982,6 +986,7 @@ static const char *jz4780_nemc_groups[] = {
 static const char *jz4780_i2c3_groups[] = { "i2c3-data", };
 static const char *jz4780_i2c4_groups[] = { "i2c4-data-e", "i2c4-data-f", };
 static const char *jz4780_cim_groups[] = { "cim-data", };
+static const char *jz4780_hdmi_ddc_groups[] = { "hdmi-ddc", };
 
 static const struct function_desc jz4780_functions[] = {
 	{ "uart0", jz4770_uart0_groups, ARRAY_SIZE(jz4770_uart0_groups), },
@@ -1014,6 +1019,8 @@ static const struct function_desc jz4780_functions[] = {
 	{ "pwm5", jz4770_pwm5_groups, ARRAY_SIZE(jz4770_pwm5_groups), },
 	{ "pwm6", jz4770_pwm6_groups, ARRAY_SIZE(jz4770_pwm6_groups), },
 	{ "pwm7", jz4770_pwm7_groups, ARRAY_SIZE(jz4770_pwm7_groups), },
+	{ "hdmi-ddc", jz4780_hdmi_ddc_groups,
+		      ARRAY_SIZE(jz4780_hdmi_ddc_groups), },
 };
 
 static const struct ingenic_chip_info jz4780_chip_info = {
@@ -1437,6 +1444,19 @@ static int x1830_mmc1_4bit_pins[] = { 0x45, 0x46, 0x47, };
 static int x1830_i2c0_pins[] = { 0x0c, 0x0d, };
 static int x1830_i2c1_pins[] = { 0x39, 0x3a, };
 static int x1830_i2c2_pins[] = { 0x5b, 0x5c, };
+static int x1830_lcd_rgb_18bit_pins[] = {
+	0x62, 0x63, 0x64, 0x65, 0x66, 0x67,
+	0x68, 0x69, 0x6c, 0x6d, 0x6e, 0x6f,
+	0x70, 0x71, 0x72, 0x73, 0x76, 0x77,
+	0x78, 0x79, 0x7a, 0x7b,
+};
+static int x1830_lcd_slcd_8bit_pins[] = {
+	0x62, 0x63, 0x64, 0x65, 0x66, 0x67, 0x6c, 0x6d,
+	0x69, 0x72, 0x73, 0x7b, 0x7a,
+};
+static int x1830_lcd_slcd_16bit_pins[] = {
+	0x6e, 0x6f, 0x70, 0x71, 0x76, 0x77, 0x78, 0x79,
+};
 static int x1830_pwm_pwm0_b_pins[] = { 0x31, };
 static int x1830_pwm_pwm0_c_pins[] = { 0x4b, };
 static int x1830_pwm_pwm1_b_pins[] = { 0x32, };
@@ -1486,6 +1506,16 @@ static int x1830_mmc1_4bit_funcs[] = { 0, 0, 0, };
 static int x1830_i2c0_funcs[] = { 1, 1, };
 static int x1830_i2c1_funcs[] = { 0, 0, };
 static int x1830_i2c2_funcs[] = { 1, 1, };
+static int x1830_lcd_rgb_18bit_funcs[] = {
+	0, 0, 0, 0, 0, 0,
+	0, 0, 0, 0, 0, 0,
+	0, 0, 0, 0, 0, 0,
+	0, 0, 0, 0,
+};
+static int x1830_lcd_slcd_8bit_funcs[] = {
+	1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+};
+static int x1830_lcd_slcd_16bit_funcs[] = { 1, 1, 1, 1, 1, 1, 1, 1, };
 static int x1830_pwm_pwm0_b_funcs[] = { 0, };
 static int x1830_pwm_pwm0_c_funcs[] = { 1, };
 static int x1830_pwm_pwm1_b_funcs[] = { 0, };
@@ -1534,6 +1564,10 @@ static const struct group_desc x1830_groups[] = {
 	INGENIC_PIN_GROUP("i2c0-data", x1830_i2c0),
 	INGENIC_PIN_GROUP("i2c1-data", x1830_i2c1),
 	INGENIC_PIN_GROUP("i2c2-data", x1830_i2c2),
+	INGENIC_PIN_GROUP("lcd-rgb-18bit", x1830_lcd_rgb_18bit),
+	INGENIC_PIN_GROUP("lcd-slcd-8bit", x1830_lcd_slcd_8bit),
+	INGENIC_PIN_GROUP("lcd-slcd-16bit", x1830_lcd_slcd_16bit),
+	{ "lcd-no-pins", },
 	INGENIC_PIN_GROUP("pwm0-b", x1830_pwm_pwm0_b),
 	INGENIC_PIN_GROUP("pwm0-c", x1830_pwm_pwm0_c),
 	INGENIC_PIN_GROUP("pwm1-b", x1830_pwm_pwm1_b),
@@ -1572,6 +1606,9 @@ static const char *x1830_mmc1_groups[] = { "mmc1-1bit", "mmc1-4bit", };
 static const char *x1830_i2c0_groups[] = { "i2c0-data", };
 static const char *x1830_i2c1_groups[] = { "i2c1-data", };
 static const char *x1830_i2c2_groups[] = { "i2c2-data", };
+static const char *x1830_lcd_groups[] = {
+	"lcd-rgb-18bit", "lcd-slcd-8bit", "lcd-slcd-16bit", "lcd-no-pins",
+};
 static const char *x1830_pwm0_groups[] = { "pwm0-b", "pwm0-c", };
 static const char *x1830_pwm1_groups[] = { "pwm1-b", "pwm1-c", };
 static const char *x1830_pwm2_groups[] = { "pwm2-c-8", "pwm2-c-13", };
@@ -1593,6 +1630,7 @@ static const struct function_desc x1830_functions[] = {
 	{ "i2c0", x1830_i2c0_groups, ARRAY_SIZE(x1830_i2c0_groups), },
 	{ "i2c1", x1830_i2c1_groups, ARRAY_SIZE(x1830_i2c1_groups), },
 	{ "i2c2", x1830_i2c2_groups, ARRAY_SIZE(x1830_i2c2_groups), },
+	{ "lcd", x1830_lcd_groups, ARRAY_SIZE(x1830_lcd_groups), },
 	{ "pwm0", x1830_pwm0_groups, ARRAY_SIZE(x1830_pwm0_groups), },
 	{ "pwm1", x1830_pwm1_groups, ARRAY_SIZE(x1830_pwm1_groups), },
 	{ "pwm2", x1830_pwm2_groups, ARRAY_SIZE(x1830_pwm2_groups), },
@@ -1916,13 +1954,19 @@ static int ingenic_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
 	struct ingenic_pinctrl *jzpc = jzgc->jzpc;
 	unsigned int pin = gc->base + offset;
 
-	if (jzpc->info->version >= ID_JZ4760)
-		return ingenic_get_pin_config(jzpc, pin, JZ4760_GPIO_PAT1);
+	if (jzpc->info->version >= ID_JZ4760) {
+		if (ingenic_get_pin_config(jzpc, pin, JZ4760_GPIO_PAT1))
+			return GPIO_LINE_DIRECTION_IN;
+		return GPIO_LINE_DIRECTION_OUT;
+	}
 
 	if (ingenic_get_pin_config(jzpc, pin, JZ4740_GPIO_SELECT))
-		return true;
+		return GPIO_LINE_DIRECTION_IN;
 
-	return !ingenic_get_pin_config(jzpc, pin, JZ4740_GPIO_DIR);
+	if (ingenic_get_pin_config(jzpc, pin, JZ4740_GPIO_DIR))
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
 }
 
 static const struct pinctrl_ops ingenic_pctlops = {
@@ -2158,7 +2202,8 @@ static int ingenic_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
 			break;
 
 		default:
-			unreachable();
+			/* unreachable */
+			break;
 		}
 	}
 
@@ -2278,11 +2323,8 @@ static int __init ingenic_gpio_probe(struct ingenic_pinctrl *jzpc,
 	jzgc->gc.direction_input = ingenic_gpio_direction_input;
 	jzgc->gc.direction_output = ingenic_gpio_direction_output;
 	jzgc->gc.get_direction = ingenic_gpio_get_direction;
-
-	if (of_property_read_bool(node, "gpio-ranges")) {
-		jzgc->gc.request = gpiochip_generic_request;
-		jzgc->gc.free = gpiochip_generic_free;
-	}
+	jzgc->gc.request = gpiochip_generic_request;
+	jzgc->gc.free = gpiochip_generic_free;
 
 	jzgc->irq = irq_of_parse_and_map(node, 0);
 	if (!jzgc->irq)
diff --git a/drivers/pinctrl/pinctrl-ocelot.c b/drivers/pinctrl/pinctrl-ocelot.c
index eb3dd0d..ed8eac6 100644
--- a/drivers/pinctrl/pinctrl-ocelot.c
+++ b/drivers/pinctrl/pinctrl-ocelot.c
@@ -604,7 +604,10 @@ static int ocelot_gpio_get_direction(struct gpio_chip *chip,
 
 	regmap_read(info->map, REG(OCELOT_GPIO_OE, info, offset), &val);
 
-	return !(val & BIT(offset % 32));
+	if (val & BIT(offset % 32))
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
 }
 
 static int ocelot_gpio_direction_input(struct gpio_chip *chip,
diff --git a/drivers/pinctrl/pinctrl-oxnas.c b/drivers/pinctrl/pinctrl-oxnas.c
index 674b7b5..5a31227 100644
--- a/drivers/pinctrl/pinctrl-oxnas.c
+++ b/drivers/pinctrl/pinctrl-oxnas.c
@@ -756,7 +756,10 @@ static int oxnas_gpio_get_direction(struct gpio_chip *chip,
 	struct oxnas_gpio_bank *bank = gpiochip_get_data(chip);
 	u32 mask = BIT(offset);
 
-	return !(readl_relaxed(bank->reg_base + OUTPUT_EN) & mask);
+	if (readl_relaxed(bank->reg_base + OUTPUT_EN) & mask)
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
 }
 
 static int oxnas_gpio_direction_input(struct gpio_chip *chip,
diff --git a/drivers/pinctrl/pinctrl-pic32.c b/drivers/pinctrl/pinctrl-pic32.c
index e5d6d3f..a6e2a4a 100644
--- a/drivers/pinctrl/pinctrl-pic32.c
+++ b/drivers/pinctrl/pinctrl-pic32.c
@@ -1990,7 +1990,10 @@ static int pic32_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
 {
 	struct pic32_gpio_bank *bank = gpiochip_get_data(chip);
 
-	return !!(readl(bank->reg_base + TRIS_REG) & BIT(offset));
+	if (readl(bank->reg_base + TRIS_REG) & BIT(offset))
+		return GPIO_LINE_DIRECTION_IN;
+
+	return GPIO_LINE_DIRECTION_OUT;
 }
 
 static void pic32_gpio_irq_ack(struct irq_data *data)
diff --git a/drivers/pinctrl/pinctrl-pistachio.c b/drivers/pinctrl/pinctrl-pistachio.c
index fa370c1..ec761ba 100644
--- a/drivers/pinctrl/pinctrl-pistachio.c
+++ b/drivers/pinctrl/pinctrl-pistachio.c
@@ -1166,7 +1166,10 @@ static int pistachio_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
 {
 	struct pistachio_gpio_bank *bank = gpiochip_get_data(chip);
 
-	return !(gpio_readl(bank, GPIO_OUTPUT_EN) & BIT(offset));
+	if (gpio_readl(bank, GPIO_OUTPUT_EN) & BIT(offset))
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
 }
 
 static int pistachio_gpio_get(struct gpio_chip *chip, unsigned offset)
diff --git a/drivers/pinctrl/pinctrl-rk805.c b/drivers/pinctrl/pinctrl-rk805.c
index 26adbe9..cccbe07 100644
--- a/drivers/pinctrl/pinctrl-rk805.c
+++ b/drivers/pinctrl/pinctrl-rk805.c
@@ -184,7 +184,7 @@ static int rk805_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
 
 	/* default output*/
 	if (!pci->pin_cfg[offset].dir_msk)
-		return 0;
+		return GPIO_LINE_DIRECTION_OUT;
 
 	ret = regmap_read(pci->rk808->regmap,
 			  pci->pin_cfg[offset].reg,
@@ -194,7 +194,10 @@ static int rk805_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
 		return ret;
 	}
 
-	return !(val & pci->pin_cfg[offset].dir_msk);
+	if (val & pci->pin_cfg[offset].dir_msk)
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
 }
 
 static const struct gpio_chip rk805_gpio_chip = {
diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
index fc9a2a9..0989513 100644
--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -2549,7 +2549,10 @@ static int rockchip_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
 	data = readl_relaxed(bank->reg_base + GPIO_SWPORT_DDR);
 	clk_disable(bank->clk);
 
-	return !(data & BIT(offset));
+	if (data & BIT(offset))
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
 }
 
 /*
diff --git a/drivers/pinctrl/pinctrl-rza1.c b/drivers/pinctrl/pinctrl-rza1.c
index 617585b..da2d836 100644
--- a/drivers/pinctrl/pinctrl-rza1.c
+++ b/drivers/pinctrl/pinctrl-rza1.c
@@ -777,7 +777,10 @@ static int rza1_gpio_get_direction(struct gpio_chip *chip, unsigned int gpio)
 {
 	struct rza1_port *port = gpiochip_get_data(chip);
 
-	return !!rza1_get_bit(port, RZA1_PM_REG, gpio);
+	if (rza1_get_bit(port, RZA1_PM_REG, gpio))
+		return GPIO_LINE_DIRECTION_IN;
+
+	return GPIO_LINE_DIRECTION_OUT;
 }
 
 static int rza1_gpio_direction_input(struct gpio_chip *chip,
diff --git a/drivers/pinctrl/pinctrl-rza2.c b/drivers/pinctrl/pinctrl-rza2.c
index a205964..c5bf98c 100644
--- a/drivers/pinctrl/pinctrl-rza2.c
+++ b/drivers/pinctrl/pinctrl-rza2.c
@@ -135,10 +135,10 @@ static int rza2_chip_get_direction(struct gpio_chip *chip, unsigned int offset)
 	reg16 = (reg16 >> (pin * 2)) & RZA2_PDR_MASK;
 
 	if (reg16 == RZA2_PDR_OUTPUT)
-		return 0;
+		return GPIO_LINE_DIRECTION_OUT;
 
 	if (reg16 == RZA2_PDR_INPUT)
-		return 1;
+		return GPIO_LINE_DIRECTION_IN;
 
 	/*
 	 * This GPIO controller has a default Hi-Z state that is not input or
@@ -146,7 +146,7 @@ static int rza2_chip_get_direction(struct gpio_chip *chip, unsigned int offset)
 	 */
 	rza2_pin_to_gpio(priv->base, offset, 1);
 
-	return 1;
+	return GPIO_LINE_DIRECTION_IN;
 }
 
 static int rza2_chip_direction_input(struct gpio_chip *chip,
diff --git a/drivers/pinctrl/pinctrl-st.c b/drivers/pinctrl/pinctrl-st.c
index 4f39a79..7b8c7a0 100644
--- a/drivers/pinctrl/pinctrl-st.c
+++ b/drivers/pinctrl/pinctrl-st.c
@@ -746,7 +746,10 @@ static int st_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
 	function = st_pctl_get_pin_function(&pc, offset);
 	if (function) {
 		st_pinconf_get_direction(&pc, offset, &config);
-		return !ST_PINCONF_UNPACK_OE(config);
+		if (ST_PINCONF_UNPACK_OE(config))
+			return GPIO_LINE_DIRECTION_OUT;
+
+		return GPIO_LINE_DIRECTION_IN;
 	}
 
 	/*
@@ -758,7 +761,10 @@ static int st_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
 		direction |= ((value >> offset) & 0x1) << i;
 	}
 
-	return (direction == ST_GPIO_DIRECTION_IN);
+	if (direction == ST_GPIO_DIRECTION_IN)
+		return GPIO_LINE_DIRECTION_IN;
+
+	return GPIO_LINE_DIRECTION_OUT;
 }
 
 /* Pinctrl Groups */
@@ -996,6 +1002,7 @@ static void st_pinconf_dbg_show(struct pinctrl_dev *pctldev,
 	unsigned int function;
 	int offset = st_gpio_pin(pin_id);
 	char f[16];
+	int oe;
 
 	mutex_unlock(&pctldev->mutex);
 	pc = st_get_pio_control(pctldev, pin_id);
@@ -1008,10 +1015,11 @@ static void st_pinconf_dbg_show(struct pinctrl_dev *pctldev,
 	else
 		snprintf(f, 5, "GPIO");
 
+	oe = st_gpio_get_direction(&pc_to_bank(pc)->gpio_chip, offset);
 	seq_printf(s, "[OE:%d,PU:%ld,OD:%ld]\t%s\n"
 		"\t\t[retime:%ld,invclk:%ld,clknotdat:%ld,"
 		"de:%ld,rt-clk:%ld,rt-delay:%ld]",
-		!st_gpio_get_direction(&pc_to_bank(pc)->gpio_chip, offset),
+		(oe == GPIO_LINE_DIRECTION_OUT),
 		ST_PINCONF_UNPACK_PU(config),
 		ST_PINCONF_UNPACK_OD(config),
 		f,
diff --git a/drivers/pinctrl/pinctrl-stmfx.c b/drivers/pinctrl/pinctrl-stmfx.c
index 1672379..60100b4 100644
--- a/drivers/pinctrl/pinctrl-stmfx.c
+++ b/drivers/pinctrl/pinctrl-stmfx.c
@@ -134,10 +134,14 @@ static int stmfx_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
 	ret = regmap_read(pctl->stmfx->map, reg, &val);
 	/*
 	 * On stmfx, gpio pins direction is (0)input, (1)output.
-	 * .get_direction returns 0=out, 1=in
 	 */
+	if (ret)
+		return ret;
 
-	return ret ? ret : !(val & mask);
+	if (val & mask)
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
 }
 
 static int stmfx_gpio_direction_input(struct gpio_chip *gc, unsigned int offset)
@@ -223,6 +227,13 @@ static int stmfx_pinconf_get(struct pinctrl_dev *pctldev,
 	dir = stmfx_gpio_get_direction(&pctl->gpio_chip, pin);
 	if (dir < 0)
 		return dir;
+
+	/*
+	 * Currently the gpiolib IN is 1 and OUT is 0 but let's not count
+	 * on it just to be on the safe side also in the future :)
+	 */
+	dir = (dir == GPIO_LINE_DIRECTION_IN) ? 1 : 0;
+
 	type = stmfx_pinconf_get_type(pctl, pin);
 	if (type < 0)
 		return type;
@@ -360,7 +371,7 @@ static void stmfx_pinconf_dbg_show(struct pinctrl_dev *pctldev,
 	if (val < 0)
 		return;
 
-	if (!dir) {
+	if (dir == GPIO_LINE_DIRECTION_OUT) {
 		seq_printf(s, "output %s ", val ? "high" : "low");
 		if (type)
 			seq_printf(s, "open drain %s internal pull-up ",
diff --git a/drivers/pinctrl/pinctrl-sx150x.c b/drivers/pinctrl/pinctrl-sx150x.c
index 5666659..6e74bd8 100644
--- a/drivers/pinctrl/pinctrl-sx150x.c
+++ b/drivers/pinctrl/pinctrl-sx150x.c
@@ -391,13 +391,16 @@ static int sx150x_gpio_get_direction(struct gpio_chip *chip,
 	int ret;
 
 	if (sx150x_pin_is_oscio(pctl, offset))
-		return false;
+		return GPIO_LINE_DIRECTION_OUT;
 
 	ret = regmap_read(pctl->regmap, pctl->data->reg_dir, &value);
 	if (ret < 0)
 		return ret;
 
-	return !!(value & BIT(offset));
+	if (value & BIT(offset))
+		return GPIO_LINE_DIRECTION_IN;
+
+	return GPIO_LINE_DIRECTION_OUT;
 }
 
 static int sx150x_gpio_get(struct gpio_chip *chip, unsigned int offset)
@@ -687,7 +690,7 @@ static int sx150x_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin,
 		if (ret < 0)
 			return ret;
 
-		if (ret)
+		if (ret == GPIO_LINE_DIRECTION_IN)
 			return -EINVAL;
 
 		ret = sx150x_gpio_get(&pctl->gpio, pin);
diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
index 811af2f8..c5d4428 100644
--- a/drivers/pinctrl/qcom/Kconfig
+++ b/drivers/pinctrl/qcom/Kconfig
@@ -50,6 +50,16 @@
 	  Qualcomm Technologies Inc. IPQ8074 platform. Select this for
 	  IPQ8074.
 
+config PINCTRL_IPQ6018
+	tristate "Qualcomm Technologies, Inc. IPQ6018 pin controller driver"
+	depends on GPIOLIB && OF
+	select PINCTRL_MSM
+	help
+	  This is the pinctrl, pinmux, pinconf and gpiolib driver for
+	  the Qualcomm Technologies Inc. TLMM block found on the
+	  Qualcomm Technologies Inc. IPQ6018 platform. Select this for
+	  IPQ6018.
+
 config PINCTRL_MSM8660
 	tristate "Qualcomm 8660 pin controller driver"
 	depends on GPIOLIB && OF
diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile
index c2c2f9a..d9e0904 100644
--- a/drivers/pinctrl/qcom/Makefile
+++ b/drivers/pinctrl/qcom/Makefile
@@ -6,6 +6,7 @@
 obj-$(CONFIG_PINCTRL_IPQ4019)	+= pinctrl-ipq4019.o
 obj-$(CONFIG_PINCTRL_IPQ8064)	+= pinctrl-ipq8064.o
 obj-$(CONFIG_PINCTRL_IPQ8074)	+= pinctrl-ipq8074.o
+obj-$(CONFIG_PINCTRL_IPQ6018)	+= pinctrl-ipq6018.o
 obj-$(CONFIG_PINCTRL_MSM8660)	+= pinctrl-msm8660.o
 obj-$(CONFIG_PINCTRL_MSM8960)	+= pinctrl-msm8960.o
 obj-$(CONFIG_PINCTRL_MSM8X74)	+= pinctrl-msm8x74.o
diff --git a/drivers/pinctrl/qcom/pinctrl-ipq6018.c b/drivers/pinctrl/qcom/pinctrl-ipq6018.c
new file mode 100644
index 0000000..38c33a7
--- /dev/null
+++ b/drivers/pinctrl/qcom/pinctrl-ipq6018.c
@@ -0,0 +1,1107 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-msm.h"
+
+#define FUNCTION(fname)			                \
+	[msm_mux_##fname] = {		                \
+		.name = #fname,				\
+		.groups = fname##_groups,               \
+		.ngroups = ARRAY_SIZE(fname##_groups),	\
+	}
+
+#define REG_SIZE 0x1000
+#define PINGROUP(id, f1, f2, f3, f4, f5, f6, f7, f8, f9)	\
+	{					        \
+		.name = "gpio" #id,			\
+		.pins = gpio##id##_pins,		\
+		.npins = (unsigned int)ARRAY_SIZE(gpio##id##_pins),	\
+		.funcs = (int[]){			\
+			msm_mux_gpio, /* gpio mode */	\
+			msm_mux_##f1,			\
+			msm_mux_##f2,			\
+			msm_mux_##f3,			\
+			msm_mux_##f4,			\
+			msm_mux_##f5,			\
+			msm_mux_##f6,			\
+			msm_mux_##f7,			\
+			msm_mux_##f8,			\
+			msm_mux_##f9			\
+		},				        \
+		.nfuncs = 10,				\
+		.ctl_reg = REG_SIZE * id,			\
+		.io_reg = 0x4 + REG_SIZE * id,		\
+		.intr_cfg_reg = 0x8 + REG_SIZE * id,		\
+		.intr_status_reg = 0xc + REG_SIZE * id,	\
+		.intr_target_reg = 0x8 + REG_SIZE * id,	\
+		.mux_bit = 2,			\
+		.pull_bit = 0,			\
+		.drv_bit = 6,			\
+		.oe_bit = 9,			\
+		.in_bit = 0,			\
+		.out_bit = 1,			\
+		.intr_enable_bit = 0,		\
+		.intr_status_bit = 0,		\
+		.intr_target_bit = 5,		\
+		.intr_target_kpss_val = 3,	\
+		.intr_raw_status_bit = 4,	\
+		.intr_polarity_bit = 1,		\
+		.intr_detection_bit = 2,	\
+		.intr_detection_width = 2,	\
+	}
+
+static const struct pinctrl_pin_desc ipq6018_pins[] = {
+	PINCTRL_PIN(0, "GPIO_0"),
+	PINCTRL_PIN(1, "GPIO_1"),
+	PINCTRL_PIN(2, "GPIO_2"),
+	PINCTRL_PIN(3, "GPIO_3"),
+	PINCTRL_PIN(4, "GPIO_4"),
+	PINCTRL_PIN(5, "GPIO_5"),
+	PINCTRL_PIN(6, "GPIO_6"),
+	PINCTRL_PIN(7, "GPIO_7"),
+	PINCTRL_PIN(8, "GPIO_8"),
+	PINCTRL_PIN(9, "GPIO_9"),
+	PINCTRL_PIN(10, "GPIO_10"),
+	PINCTRL_PIN(11, "GPIO_11"),
+	PINCTRL_PIN(12, "GPIO_12"),
+	PINCTRL_PIN(13, "GPIO_13"),
+	PINCTRL_PIN(14, "GPIO_14"),
+	PINCTRL_PIN(15, "GPIO_15"),
+	PINCTRL_PIN(16, "GPIO_16"),
+	PINCTRL_PIN(17, "GPIO_17"),
+	PINCTRL_PIN(18, "GPIO_18"),
+	PINCTRL_PIN(19, "GPIO_19"),
+	PINCTRL_PIN(20, "GPIO_20"),
+	PINCTRL_PIN(21, "GPIO_21"),
+	PINCTRL_PIN(22, "GPIO_22"),
+	PINCTRL_PIN(23, "GPIO_23"),
+	PINCTRL_PIN(24, "GPIO_24"),
+	PINCTRL_PIN(25, "GPIO_25"),
+	PINCTRL_PIN(26, "GPIO_26"),
+	PINCTRL_PIN(27, "GPIO_27"),
+	PINCTRL_PIN(28, "GPIO_28"),
+	PINCTRL_PIN(29, "GPIO_29"),
+	PINCTRL_PIN(30, "GPIO_30"),
+	PINCTRL_PIN(31, "GPIO_31"),
+	PINCTRL_PIN(32, "GPIO_32"),
+	PINCTRL_PIN(33, "GPIO_33"),
+	PINCTRL_PIN(34, "GPIO_34"),
+	PINCTRL_PIN(35, "GPIO_35"),
+	PINCTRL_PIN(36, "GPIO_36"),
+	PINCTRL_PIN(37, "GPIO_37"),
+	PINCTRL_PIN(38, "GPIO_38"),
+	PINCTRL_PIN(39, "GPIO_39"),
+	PINCTRL_PIN(40, "GPIO_40"),
+	PINCTRL_PIN(41, "GPIO_41"),
+	PINCTRL_PIN(42, "GPIO_42"),
+	PINCTRL_PIN(43, "GPIO_43"),
+	PINCTRL_PIN(44, "GPIO_44"),
+	PINCTRL_PIN(45, "GPIO_45"),
+	PINCTRL_PIN(46, "GPIO_46"),
+	PINCTRL_PIN(47, "GPIO_47"),
+	PINCTRL_PIN(48, "GPIO_48"),
+	PINCTRL_PIN(49, "GPIO_49"),
+	PINCTRL_PIN(50, "GPIO_50"),
+	PINCTRL_PIN(51, "GPIO_51"),
+	PINCTRL_PIN(52, "GPIO_52"),
+	PINCTRL_PIN(53, "GPIO_53"),
+	PINCTRL_PIN(54, "GPIO_54"),
+	PINCTRL_PIN(55, "GPIO_55"),
+	PINCTRL_PIN(56, "GPIO_56"),
+	PINCTRL_PIN(57, "GPIO_57"),
+	PINCTRL_PIN(58, "GPIO_58"),
+	PINCTRL_PIN(59, "GPIO_59"),
+	PINCTRL_PIN(60, "GPIO_60"),
+	PINCTRL_PIN(61, "GPIO_61"),
+	PINCTRL_PIN(62, "GPIO_62"),
+	PINCTRL_PIN(63, "GPIO_63"),
+	PINCTRL_PIN(64, "GPIO_64"),
+	PINCTRL_PIN(65, "GPIO_65"),
+	PINCTRL_PIN(66, "GPIO_66"),
+	PINCTRL_PIN(67, "GPIO_67"),
+	PINCTRL_PIN(68, "GPIO_68"),
+	PINCTRL_PIN(69, "GPIO_69"),
+	PINCTRL_PIN(70, "GPIO_70"),
+	PINCTRL_PIN(71, "GPIO_71"),
+	PINCTRL_PIN(72, "GPIO_72"),
+	PINCTRL_PIN(73, "GPIO_73"),
+	PINCTRL_PIN(74, "GPIO_74"),
+	PINCTRL_PIN(75, "GPIO_75"),
+	PINCTRL_PIN(76, "GPIO_76"),
+	PINCTRL_PIN(77, "GPIO_77"),
+	PINCTRL_PIN(78, "GPIO_78"),
+	PINCTRL_PIN(79, "GPIO_79"),
+};
+
+#define DECLARE_MSM_GPIO_PINS(pin) \
+	static const unsigned int gpio##pin##_pins[] = { pin }
+DECLARE_MSM_GPIO_PINS(0);
+DECLARE_MSM_GPIO_PINS(1);
+DECLARE_MSM_GPIO_PINS(2);
+DECLARE_MSM_GPIO_PINS(3);
+DECLARE_MSM_GPIO_PINS(4);
+DECLARE_MSM_GPIO_PINS(5);
+DECLARE_MSM_GPIO_PINS(6);
+DECLARE_MSM_GPIO_PINS(7);
+DECLARE_MSM_GPIO_PINS(8);
+DECLARE_MSM_GPIO_PINS(9);
+DECLARE_MSM_GPIO_PINS(10);
+DECLARE_MSM_GPIO_PINS(11);
+DECLARE_MSM_GPIO_PINS(12);
+DECLARE_MSM_GPIO_PINS(13);
+DECLARE_MSM_GPIO_PINS(14);
+DECLARE_MSM_GPIO_PINS(15);
+DECLARE_MSM_GPIO_PINS(16);
+DECLARE_MSM_GPIO_PINS(17);
+DECLARE_MSM_GPIO_PINS(18);
+DECLARE_MSM_GPIO_PINS(19);
+DECLARE_MSM_GPIO_PINS(20);
+DECLARE_MSM_GPIO_PINS(21);
+DECLARE_MSM_GPIO_PINS(22);
+DECLARE_MSM_GPIO_PINS(23);
+DECLARE_MSM_GPIO_PINS(24);
+DECLARE_MSM_GPIO_PINS(25);
+DECLARE_MSM_GPIO_PINS(26);
+DECLARE_MSM_GPIO_PINS(27);
+DECLARE_MSM_GPIO_PINS(28);
+DECLARE_MSM_GPIO_PINS(29);
+DECLARE_MSM_GPIO_PINS(30);
+DECLARE_MSM_GPIO_PINS(31);
+DECLARE_MSM_GPIO_PINS(32);
+DECLARE_MSM_GPIO_PINS(33);
+DECLARE_MSM_GPIO_PINS(34);
+DECLARE_MSM_GPIO_PINS(35);
+DECLARE_MSM_GPIO_PINS(36);
+DECLARE_MSM_GPIO_PINS(37);
+DECLARE_MSM_GPIO_PINS(38);
+DECLARE_MSM_GPIO_PINS(39);
+DECLARE_MSM_GPIO_PINS(40);
+DECLARE_MSM_GPIO_PINS(41);
+DECLARE_MSM_GPIO_PINS(42);
+DECLARE_MSM_GPIO_PINS(43);
+DECLARE_MSM_GPIO_PINS(44);
+DECLARE_MSM_GPIO_PINS(45);
+DECLARE_MSM_GPIO_PINS(46);
+DECLARE_MSM_GPIO_PINS(47);
+DECLARE_MSM_GPIO_PINS(48);
+DECLARE_MSM_GPIO_PINS(49);
+DECLARE_MSM_GPIO_PINS(50);
+DECLARE_MSM_GPIO_PINS(51);
+DECLARE_MSM_GPIO_PINS(52);
+DECLARE_MSM_GPIO_PINS(53);
+DECLARE_MSM_GPIO_PINS(54);
+DECLARE_MSM_GPIO_PINS(55);
+DECLARE_MSM_GPIO_PINS(56);
+DECLARE_MSM_GPIO_PINS(57);
+DECLARE_MSM_GPIO_PINS(58);
+DECLARE_MSM_GPIO_PINS(59);
+DECLARE_MSM_GPIO_PINS(60);
+DECLARE_MSM_GPIO_PINS(61);
+DECLARE_MSM_GPIO_PINS(62);
+DECLARE_MSM_GPIO_PINS(63);
+DECLARE_MSM_GPIO_PINS(64);
+DECLARE_MSM_GPIO_PINS(65);
+DECLARE_MSM_GPIO_PINS(66);
+DECLARE_MSM_GPIO_PINS(67);
+DECLARE_MSM_GPIO_PINS(68);
+DECLARE_MSM_GPIO_PINS(69);
+DECLARE_MSM_GPIO_PINS(70);
+DECLARE_MSM_GPIO_PINS(71);
+DECLARE_MSM_GPIO_PINS(72);
+DECLARE_MSM_GPIO_PINS(73);
+DECLARE_MSM_GPIO_PINS(74);
+DECLARE_MSM_GPIO_PINS(75);
+DECLARE_MSM_GPIO_PINS(76);
+DECLARE_MSM_GPIO_PINS(77);
+DECLARE_MSM_GPIO_PINS(78);
+DECLARE_MSM_GPIO_PINS(79);
+
+enum ipq6018_functions {
+	msm_mux_atest_char,
+	msm_mux_atest_char0,
+	msm_mux_atest_char1,
+	msm_mux_atest_char2,
+	msm_mux_atest_char3,
+	msm_mux_audio0,
+	msm_mux_audio1,
+	msm_mux_audio2,
+	msm_mux_audio3,
+	msm_mux_audio_rxbclk,
+	msm_mux_audio_rxfsync,
+	msm_mux_audio_rxmclk,
+	msm_mux_audio_rxmclkin,
+	msm_mux_audio_txbclk,
+	msm_mux_audio_txfsync,
+	msm_mux_audio_txmclk,
+	msm_mux_audio_txmclkin,
+	msm_mux_blsp0_i2c,
+	msm_mux_blsp0_spi,
+	msm_mux_blsp0_uart,
+	msm_mux_blsp1_i2c,
+	msm_mux_blsp1_spi,
+	msm_mux_blsp1_uart,
+	msm_mux_blsp2_i2c,
+	msm_mux_blsp2_spi,
+	msm_mux_blsp2_uart,
+	msm_mux_blsp3_i2c,
+	msm_mux_blsp3_spi,
+	msm_mux_blsp3_uart,
+	msm_mux_blsp4_i2c,
+	msm_mux_blsp4_spi,
+	msm_mux_blsp4_uart,
+	msm_mux_blsp5_i2c,
+	msm_mux_blsp5_uart,
+	msm_mux_burn0,
+	msm_mux_burn1,
+	msm_mux_cri_trng,
+	msm_mux_cri_trng0,
+	msm_mux_cri_trng1,
+	msm_mux_cxc0,
+	msm_mux_cxc1,
+	msm_mux_dbg_out,
+	msm_mux_gcc_plltest,
+	msm_mux_gcc_tlmm,
+	msm_mux_gpio,
+	msm_mux_lpass_aud,
+	msm_mux_lpass_aud0,
+	msm_mux_lpass_aud1,
+	msm_mux_lpass_aud2,
+	msm_mux_lpass_pcm,
+	msm_mux_lpass_pdm,
+	msm_mux_mac00,
+	msm_mux_mac01,
+	msm_mux_mac10,
+	msm_mux_mac11,
+	msm_mux_mac12,
+	msm_mux_mac13,
+	msm_mux_mac20,
+	msm_mux_mac21,
+	msm_mux_mdc,
+	msm_mux_mdio,
+	msm_mux_pcie0_clk,
+	msm_mux_pcie0_rst,
+	msm_mux_pcie0_wake,
+	msm_mux_prng_rosc,
+	msm_mux_pta1_0,
+	msm_mux_pta1_1,
+	msm_mux_pta1_2,
+	msm_mux_pta2_0,
+	msm_mux_pta2_1,
+	msm_mux_pta2_2,
+	msm_mux_pwm00,
+	msm_mux_pwm01,
+	msm_mux_pwm02,
+	msm_mux_pwm03,
+	msm_mux_pwm04,
+	msm_mux_pwm10,
+	msm_mux_pwm11,
+	msm_mux_pwm12,
+	msm_mux_pwm13,
+	msm_mux_pwm14,
+	msm_mux_pwm20,
+	msm_mux_pwm21,
+	msm_mux_pwm22,
+	msm_mux_pwm23,
+	msm_mux_pwm24,
+	msm_mux_pwm30,
+	msm_mux_pwm31,
+	msm_mux_pwm32,
+	msm_mux_pwm33,
+	msm_mux_qdss_cti_trig_in_a0,
+	msm_mux_qdss_cti_trig_in_a1,
+	msm_mux_qdss_cti_trig_out_a0,
+	msm_mux_qdss_cti_trig_out_a1,
+	msm_mux_qdss_cti_trig_in_b0,
+	msm_mux_qdss_cti_trig_in_b1,
+	msm_mux_qdss_cti_trig_out_b0,
+	msm_mux_qdss_cti_trig_out_b1,
+	msm_mux_qdss_traceclk_a,
+	msm_mux_qdss_tracectl_a,
+	msm_mux_qdss_tracedata_a,
+	msm_mux_qdss_traceclk_b,
+	msm_mux_qdss_tracectl_b,
+	msm_mux_qdss_tracedata_b,
+	msm_mux_qpic_pad,
+	msm_mux_rx0,
+	msm_mux_rx1,
+	msm_mux_rx_swrm,
+	msm_mux_rx_swrm0,
+	msm_mux_rx_swrm1,
+	msm_mux_sd_card,
+	msm_mux_sd_write,
+	msm_mux_tsens_max,
+	msm_mux_tx_swrm,
+	msm_mux_tx_swrm0,
+	msm_mux_tx_swrm1,
+	msm_mux_tx_swrm2,
+	msm_mux_wci20,
+	msm_mux_wci21,
+	msm_mux_wci22,
+	msm_mux_wci23,
+	msm_mux_wsa_swrm,
+	msm_mux__,
+};
+
+static const char * const blsp3_uart_groups[] = {
+	"gpio73", "gpio74", "gpio75", "gpio76",
+};
+
+static const char * const blsp3_i2c_groups[] = {
+	"gpio73", "gpio74",
+};
+
+static const char * const blsp3_spi_groups[] = {
+	"gpio73", "gpio74", "gpio75", "gpio76", "gpio77", "gpio78", "gpio79",
+};
+
+static const char * const wci20_groups[] = {
+	"gpio0", "gpio2",
+};
+
+static const char * const qpic_pad_groups[] = {
+	"gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio9", "gpio10",
+	"gpio11", "gpio17",
+};
+
+static const char * const burn0_groups[] = {
+	"gpio0",
+};
+
+static const char * const mac12_groups[] = {
+	"gpio1", "gpio11",
+};
+
+static const char * const qdss_tracectl_b_groups[] = {
+	"gpio1",
+};
+
+static const char * const burn1_groups[] = {
+	"gpio1",
+};
+
+static const char * const qdss_traceclk_b_groups[] = {
+	"gpio0",
+};
+
+static const char * const qdss_tracedata_b_groups[] = {
+	"gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7", "gpio8", "gpio9",
+	"gpio10", "gpio11", "gpio12", "gpio13", "gpio14", "gpio15", "gpio16",
+	"gpio17",
+};
+
+static const char * const mac01_groups[] = {
+	"gpio3", "gpio4",
+};
+
+static const char * const mac21_groups[] = {
+	"gpio5", "gpio6",
+};
+
+static const char * const atest_char_groups[] = {
+	"gpio9",
+};
+
+static const char * const cxc0_groups[] = {
+	"gpio9", "gpio16",
+};
+
+static const char * const mac13_groups[] = {
+	"gpio9", "gpio16",
+};
+
+static const char * const dbg_out_groups[] = {
+	"gpio9",
+};
+
+static const char * const wci22_groups[] = {
+	"gpio11", "gpio17",
+};
+
+static const char * const pwm00_groups[] = {
+	"gpio18",
+};
+
+static const char * const atest_char0_groups[] = {
+	"gpio18",
+};
+
+static const char * const wci23_groups[] = {
+	"gpio18", "gpio19",
+};
+
+static const char * const mac11_groups[] = {
+	"gpio18", "gpio19",
+};
+
+static const char * const pwm10_groups[] = {
+	"gpio19",
+};
+
+static const char * const atest_char1_groups[] = {
+	"gpio19",
+};
+
+static const char * const pwm20_groups[] = {
+	"gpio20",
+};
+
+static const char * const atest_char2_groups[] = {
+	"gpio20",
+};
+
+static const char * const pwm30_groups[] = {
+	"gpio21",
+};
+
+static const char * const atest_char3_groups[] = {
+	"gpio21",
+};
+
+static const char * const audio_txmclk_groups[] = {
+	"gpio22",
+};
+
+static const char * const audio_txmclkin_groups[] = {
+	"gpio22",
+};
+
+static const char * const pwm02_groups[] = {
+	"gpio22",
+};
+
+static const char * const tx_swrm0_groups[] = {
+	"gpio22",
+};
+
+static const char * const qdss_cti_trig_out_b0_groups[] = {
+	"gpio22",
+};
+
+static const char * const audio_txbclk_groups[] = {
+	"gpio23",
+};
+
+static const char * const pwm12_groups[] = {
+	"gpio23",
+};
+
+static const char * const wsa_swrm_groups[] = {
+	"gpio23", "gpio24",
+};
+
+static const char * const tx_swrm1_groups[] = {
+	"gpio23",
+};
+
+static const char * const qdss_cti_trig_in_b0_groups[] = {
+	"gpio23",
+};
+
+static const char * const audio_txfsync_groups[] = {
+	"gpio24",
+};
+
+static const char * const pwm22_groups[] = {
+	"gpio24",
+};
+
+static const char * const tx_swrm2_groups[] = {
+	"gpio24",
+};
+
+static const char * const qdss_cti_trig_out_b1_groups[] = {
+	"gpio24",
+};
+
+static const char * const audio0_groups[] = {
+	"gpio25", "gpio32",
+};
+
+static const char * const pwm32_groups[] = {
+	"gpio25",
+};
+
+static const char * const tx_swrm_groups[] = {
+	"gpio25",
+};
+
+static const char * const qdss_cti_trig_in_b1_groups[] = {
+	"gpio25",
+};
+
+static const char * const audio1_groups[] = {
+	"gpio26", "gpio33",
+};
+
+static const char * const pwm04_groups[] = {
+	"gpio26",
+};
+
+static const char * const audio2_groups[] = {
+	"gpio27",
+};
+
+static const char * const pwm14_groups[] = {
+	"gpio27",
+};
+
+static const char * const audio3_groups[] = {
+	"gpio28",
+};
+
+static const char * const pwm24_groups[] = {
+	"gpio28",
+};
+
+static const char * const audio_rxmclk_groups[] = {
+	"gpio29",
+};
+
+static const char * const audio_rxmclkin_groups[] = {
+	"gpio29",
+};
+
+static const char * const pwm03_groups[] = {
+	"gpio29",
+};
+
+static const char * const lpass_pdm_groups[] = {
+	"gpio29", "gpio30", "gpio31", "gpio32",
+};
+
+static const char * const lpass_aud_groups[] = {
+	"gpio29",
+};
+
+static const char * const qdss_cti_trig_in_a1_groups[] = {
+	"gpio29",
+};
+
+static const char * const audio_rxbclk_groups[] = {
+	"gpio30",
+};
+
+static const char * const pwm13_groups[] = {
+	"gpio30",
+};
+
+static const char * const lpass_aud0_groups[] = {
+	"gpio30",
+};
+
+static const char * const rx_swrm_groups[] = {
+	"gpio30",
+};
+
+static const char * const qdss_cti_trig_out_a1_groups[] = {
+	"gpio30",
+};
+
+static const char * const audio_rxfsync_groups[] = {
+	"gpio31",
+};
+
+static const char * const pwm23_groups[] = {
+	"gpio31",
+};
+
+static const char * const lpass_aud1_groups[] = {
+	"gpio31",
+};
+
+static const char * const rx_swrm0_groups[] = {
+	"gpio31",
+};
+
+static const char * const qdss_cti_trig_in_a0_groups[] = {
+	"gpio31",
+};
+
+static const char * const pwm33_groups[] = {
+	"gpio32",
+};
+
+static const char * const lpass_aud2_groups[] = {
+	"gpio32",
+};
+
+static const char * const rx_swrm1_groups[] = {
+	"gpio32",
+};
+
+static const char * const qdss_cti_trig_out_a0_groups[] = {
+	"gpio32",
+};
+
+static const char * const lpass_pcm_groups[] = {
+	"gpio34", "gpio35", "gpio36", "gpio37",
+};
+
+static const char * const mac10_groups[] = {
+	"gpio34", "gpio35",
+};
+
+static const char * const mac00_groups[] = {
+	"gpio34", "gpio35",
+};
+
+static const char * const mac20_groups[] = {
+	"gpio36", "gpio37",
+};
+
+static const char * const blsp0_uart_groups[] = {
+	"gpio38", "gpio39", "gpio40", "gpio41",
+};
+
+static const char * const blsp0_i2c_groups[] = {
+	"gpio38", "gpio39",
+};
+
+static const char * const blsp0_spi_groups[] = {
+	"gpio38", "gpio39", "gpio40", "gpio41",
+};
+
+static const char * const blsp2_uart_groups[] = {
+	"gpio42", "gpio43", "gpio44", "gpio45",
+};
+
+static const char * const blsp2_i2c_groups[] = {
+	"gpio42", "gpio43",
+};
+
+static const char * const blsp2_spi_groups[] = {
+	"gpio42", "gpio43", "gpio44", "gpio45",
+};
+
+static const char * const blsp5_i2c_groups[] = {
+	"gpio46", "gpio47",
+};
+
+static const char * const blsp5_uart_groups[] = {
+	"gpio48", "gpio49",
+};
+
+static const char * const qdss_traceclk_a_groups[] = {
+	"gpio48",
+};
+
+static const char * const qdss_tracectl_a_groups[] = {
+	"gpio49",
+};
+
+static const char * const pwm01_groups[] = {
+	"gpio50",
+};
+
+static const char * const pta1_1_groups[] = {
+	"gpio51",
+};
+
+static const char * const pwm11_groups[] = {
+	"gpio51",
+};
+
+static const char * const rx1_groups[] = {
+	"gpio51",
+};
+
+static const char * const pta1_2_groups[] = {
+	"gpio52",
+};
+
+static const char * const pwm21_groups[] = {
+	"gpio52",
+};
+
+static const char * const pta1_0_groups[] = {
+	"gpio53",
+};
+
+static const char * const pwm31_groups[] = {
+	"gpio53",
+};
+
+static const char * const prng_rosc_groups[] = {
+	"gpio53",
+};
+
+static const char * const blsp4_uart_groups[] = {
+	"gpio55", "gpio56", "gpio57", "gpio58",
+};
+
+static const char * const blsp4_i2c_groups[] = {
+	"gpio55", "gpio56",
+};
+
+static const char * const blsp4_spi_groups[] = {
+	"gpio55", "gpio56", "gpio57", "gpio58",
+};
+
+static const char * const pcie0_clk_groups[] = {
+	"gpio59",
+};
+
+static const char * const cri_trng0_groups[] = {
+	"gpio59",
+};
+
+static const char * const pcie0_rst_groups[] = {
+	"gpio60",
+};
+
+static const char * const cri_trng1_groups[] = {
+	"gpio60",
+};
+
+static const char * const pcie0_wake_groups[] = {
+	"gpio61",
+};
+
+static const char * const cri_trng_groups[] = {
+	"gpio61",
+};
+
+static const char * const sd_card_groups[] = {
+	"gpio62",
+};
+
+static const char * const sd_write_groups[] = {
+	"gpio63",
+};
+
+static const char * const rx0_groups[] = {
+	"gpio63",
+};
+
+static const char * const tsens_max_groups[] = {
+	"gpio63",
+};
+
+static const char * const mdc_groups[] = {
+	"gpio64",
+};
+
+static const char * const qdss_tracedata_a_groups[] = {
+	"gpio64", "gpio65", "gpio66", "gpio67", "gpio68", "gpio69", "gpio70",
+	"gpio71", "gpio72", "gpio73", "gpio74", "gpio75", "gpio76", "gpio77",
+	"gpio78", "gpio79",
+};
+
+static const char * const mdio_groups[] = {
+	"gpio65",
+};
+
+static const char * const pta2_0_groups[] = {
+	"gpio66",
+};
+
+static const char * const wci21_groups[] = {
+	"gpio66", "gpio68",
+};
+
+static const char * const cxc1_groups[] = {
+	"gpio66", "gpio68",
+};
+
+static const char * const pta2_1_groups[] = {
+	"gpio67",
+};
+
+static const char * const pta2_2_groups[] = {
+	"gpio68",
+};
+
+static const char * const blsp1_uart_groups[] = {
+	"gpio69", "gpio70", "gpio71", "gpio72",
+};
+
+static const char * const blsp1_i2c_groups[] = {
+	"gpio69", "gpio70",
+};
+
+static const char * const blsp1_spi_groups[] = {
+	"gpio69", "gpio70", "gpio71", "gpio72",
+};
+
+static const char * const gcc_plltest_groups[] = {
+	"gpio69", "gpio71",
+};
+
+static const char * const gcc_tlmm_groups[] = {
+	"gpio70",
+};
+
+static const char * const gpio_groups[] = {
+	"gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7",
+	"gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14",
+	"gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21",
+	"gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28",
+	"gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35",
+	"gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42",
+	"gpio43", "gpio44", "gpio45", "gpio46", "gpio47", "gpio48", "gpio49",
+	"gpio50", "gpio51", "gpio52", "gpio53", "gpio54", "gpio55", "gpio56",
+	"gpio57", "gpio58", "gpio59", "gpio60", "gpio61", "gpio62", "gpio63",
+	"gpio64", "gpio65", "gpio66", "gpio67", "gpio68", "gpio69", "gpio70",
+	"gpio71", "gpio72", "gpio73", "gpio74", "gpio75", "gpio76", "gpio77",
+	"gpio78", "gpio79",
+};
+
+static const struct msm_function ipq6018_functions[] = {
+	FUNCTION(atest_char),
+	FUNCTION(atest_char0),
+	FUNCTION(atest_char1),
+	FUNCTION(atest_char2),
+	FUNCTION(atest_char3),
+	FUNCTION(audio0),
+	FUNCTION(audio1),
+	FUNCTION(audio2),
+	FUNCTION(audio3),
+	FUNCTION(audio_rxbclk),
+	FUNCTION(audio_rxfsync),
+	FUNCTION(audio_rxmclk),
+	FUNCTION(audio_rxmclkin),
+	FUNCTION(audio_txbclk),
+	FUNCTION(audio_txfsync),
+	FUNCTION(audio_txmclk),
+	FUNCTION(audio_txmclkin),
+	FUNCTION(blsp0_i2c),
+	FUNCTION(blsp0_spi),
+	FUNCTION(blsp0_uart),
+	FUNCTION(blsp1_i2c),
+	FUNCTION(blsp1_spi),
+	FUNCTION(blsp1_uart),
+	FUNCTION(blsp2_i2c),
+	FUNCTION(blsp2_spi),
+	FUNCTION(blsp2_uart),
+	FUNCTION(blsp3_i2c),
+	FUNCTION(blsp3_spi),
+	FUNCTION(blsp3_uart),
+	FUNCTION(blsp4_i2c),
+	FUNCTION(blsp4_spi),
+	FUNCTION(blsp4_uart),
+	FUNCTION(blsp5_i2c),
+	FUNCTION(blsp5_uart),
+	FUNCTION(burn0),
+	FUNCTION(burn1),
+	FUNCTION(cri_trng),
+	FUNCTION(cri_trng0),
+	FUNCTION(cri_trng1),
+	FUNCTION(cxc0),
+	FUNCTION(cxc1),
+	FUNCTION(dbg_out),
+	FUNCTION(gcc_plltest),
+	FUNCTION(gcc_tlmm),
+	FUNCTION(gpio),
+	FUNCTION(lpass_aud),
+	FUNCTION(lpass_aud0),
+	FUNCTION(lpass_aud1),
+	FUNCTION(lpass_aud2),
+	FUNCTION(lpass_pcm),
+	FUNCTION(lpass_pdm),
+	FUNCTION(mac00),
+	FUNCTION(mac01),
+	FUNCTION(mac10),
+	FUNCTION(mac11),
+	FUNCTION(mac12),
+	FUNCTION(mac13),
+	FUNCTION(mac20),
+	FUNCTION(mac21),
+	FUNCTION(mdc),
+	FUNCTION(mdio),
+	FUNCTION(pcie0_clk),
+	FUNCTION(pcie0_rst),
+	FUNCTION(pcie0_wake),
+	FUNCTION(prng_rosc),
+	FUNCTION(pta1_0),
+	FUNCTION(pta1_1),
+	FUNCTION(pta1_2),
+	FUNCTION(pta2_0),
+	FUNCTION(pta2_1),
+	FUNCTION(pta2_2),
+	FUNCTION(pwm00),
+	FUNCTION(pwm01),
+	FUNCTION(pwm02),
+	FUNCTION(pwm03),
+	FUNCTION(pwm04),
+	FUNCTION(pwm10),
+	FUNCTION(pwm11),
+	FUNCTION(pwm12),
+	FUNCTION(pwm13),
+	FUNCTION(pwm14),
+	FUNCTION(pwm20),
+	FUNCTION(pwm21),
+	FUNCTION(pwm22),
+	FUNCTION(pwm23),
+	FUNCTION(pwm24),
+	FUNCTION(pwm30),
+	FUNCTION(pwm31),
+	FUNCTION(pwm32),
+	FUNCTION(pwm33),
+	FUNCTION(qdss_cti_trig_in_a0),
+	FUNCTION(qdss_cti_trig_in_a1),
+	FUNCTION(qdss_cti_trig_out_a0),
+	FUNCTION(qdss_cti_trig_out_a1),
+	FUNCTION(qdss_cti_trig_in_b0),
+	FUNCTION(qdss_cti_trig_in_b1),
+	FUNCTION(qdss_cti_trig_out_b0),
+	FUNCTION(qdss_cti_trig_out_b1),
+	FUNCTION(qdss_traceclk_a),
+	FUNCTION(qdss_tracectl_a),
+	FUNCTION(qdss_tracedata_a),
+	FUNCTION(qdss_traceclk_b),
+	FUNCTION(qdss_tracectl_b),
+	FUNCTION(qdss_tracedata_b),
+	FUNCTION(qpic_pad),
+	FUNCTION(rx0),
+	FUNCTION(rx1),
+	FUNCTION(rx_swrm),
+	FUNCTION(rx_swrm0),
+	FUNCTION(rx_swrm1),
+	FUNCTION(sd_card),
+	FUNCTION(sd_write),
+	FUNCTION(tsens_max),
+	FUNCTION(tx_swrm),
+	FUNCTION(tx_swrm0),
+	FUNCTION(tx_swrm1),
+	FUNCTION(tx_swrm2),
+	FUNCTION(wci20),
+	FUNCTION(wci21),
+	FUNCTION(wci22),
+	FUNCTION(wci23),
+	FUNCTION(wsa_swrm),
+};
+
+static const struct msm_pingroup ipq6018_groups[] = {
+	PINGROUP(0, qpic_pad, wci20, qdss_traceclk_b, _, burn0, _, _, _, _),
+	PINGROUP(1, qpic_pad, mac12, qdss_tracectl_b, _, burn1, _, _, _, _),
+	PINGROUP(2, qpic_pad, wci20, qdss_tracedata_b, _, _, _, _, _, _),
+	PINGROUP(3, qpic_pad, mac01, qdss_tracedata_b, _, _, _, _, _, _),
+	PINGROUP(4, qpic_pad, mac01, qdss_tracedata_b, _, _, _, _, _, _),
+	PINGROUP(5, qpic_pad, mac21, qdss_tracedata_b, _, _, _, _, _, _),
+	PINGROUP(6, qpic_pad, mac21, qdss_tracedata_b, _, _, _, _, _, _),
+	PINGROUP(7, qpic_pad, qdss_tracedata_b, _, _, _, _, _, _, _),
+	PINGROUP(8, qpic_pad, qdss_tracedata_b, _, _, _, _, _, _, _),
+	PINGROUP(9, qpic_pad, atest_char, cxc0, mac13, dbg_out, qdss_tracedata_b, _, _, _),
+	PINGROUP(10, qpic_pad, qdss_tracedata_b, _, _, _, _, _, _, _),
+	PINGROUP(11, qpic_pad, wci22, mac12, qdss_tracedata_b, _, _, _, _, _),
+	PINGROUP(12, qpic_pad, qdss_tracedata_b, _, _, _, _, _, _, _),
+	PINGROUP(13, qpic_pad, qdss_tracedata_b, _, _, _, _, _, _, _),
+	PINGROUP(14, qpic_pad, qdss_tracedata_b, _, _, _, _, _, _, _),
+	PINGROUP(15, qpic_pad, qdss_tracedata_b, _, _, _, _, _, _, _),
+	PINGROUP(16, qpic_pad, cxc0, mac13, qdss_tracedata_b, _, _, _, _, _),
+	PINGROUP(17, qpic_pad, qdss_tracedata_b, wci22, _, _, _, _, _, _),
+	PINGROUP(18, pwm00, atest_char0, wci23, mac11, _, _, _, _, _),
+	PINGROUP(19, pwm10, atest_char1, wci23, mac11, _, _, _, _, _),
+	PINGROUP(20, pwm20, atest_char2, _, _, _, _, _, _, _),
+	PINGROUP(21, pwm30, atest_char3, _, _, _, _, _, _, _),
+	PINGROUP(22, audio_txmclk, audio_txmclkin, pwm02, tx_swrm0, _, qdss_cti_trig_out_b0, _, _, _),
+	PINGROUP(23, audio_txbclk, pwm12, wsa_swrm, tx_swrm1, _, qdss_cti_trig_in_b0, _, _, _),
+	PINGROUP(24, audio_txfsync, pwm22, wsa_swrm, tx_swrm2, _, qdss_cti_trig_out_b1, _, _, _),
+	PINGROUP(25, audio0, pwm32, tx_swrm, _, qdss_cti_trig_in_b1, _, _, _, _),
+	PINGROUP(26, audio1, pwm04, _, _, _, _, _, _, _),
+	PINGROUP(27, audio2, pwm14, _, _, _, _, _, _, _),
+	PINGROUP(28, audio3, pwm24, _, _, _, _, _, _, _),
+	PINGROUP(29, audio_rxmclk, audio_rxmclkin, pwm03, lpass_pdm, lpass_aud, qdss_cti_trig_in_a1, _, _, _),
+	PINGROUP(30, audio_rxbclk, pwm13, lpass_pdm, lpass_aud0, rx_swrm, _, qdss_cti_trig_out_a1, _, _),
+	PINGROUP(31, audio_rxfsync, pwm23, lpass_pdm, lpass_aud1, rx_swrm0, _, qdss_cti_trig_in_a0, _, _),
+	PINGROUP(32, audio0, pwm33, lpass_pdm, lpass_aud2, rx_swrm1, _, qdss_cti_trig_out_a0, _, _),
+	PINGROUP(33, audio1, _, _, _, _, _, _, _, _),
+	PINGROUP(34, lpass_pcm, mac10, mac00, _, _, _, _, _, _),
+	PINGROUP(35, lpass_pcm, mac10, mac00, _, _, _, _, _, _),
+	PINGROUP(36, lpass_pcm, mac20, _, _, _, _, _, _, _),
+	PINGROUP(37, lpass_pcm, mac20, _, _, _, _, _, _, _),
+	PINGROUP(38, blsp0_uart, blsp0_i2c, blsp0_spi, _, _, _, _, _, _),
+	PINGROUP(39, blsp0_uart, blsp0_i2c, blsp0_spi, _, _, _, _, _, _),
+	PINGROUP(40, blsp0_uart, blsp0_spi, _, _, _, _, _, _, _),
+	PINGROUP(41, blsp0_uart, blsp0_spi, _, _, _, _, _, _, _),
+	PINGROUP(42, blsp2_uart, blsp2_i2c, blsp2_spi, _, _, _, _, _, _),
+	PINGROUP(43, blsp2_uart, blsp2_i2c, blsp2_spi, _, _, _, _, _, _),
+	PINGROUP(44, blsp2_uart, blsp2_spi, _, _, _, _, _, _, _),
+	PINGROUP(45, blsp2_uart, blsp2_spi, _, _, _, _, _, _, _),
+	PINGROUP(46, blsp5_i2c, _, _, _, _, _, _, _, _),
+	PINGROUP(47, blsp5_i2c, _, _, _, _, _, _, _, _),
+	PINGROUP(48, blsp5_uart, _, qdss_traceclk_a, _, _, _, _, _, _),
+	PINGROUP(49, blsp5_uart, _, qdss_tracectl_a, _, _, _, _, _, _),
+	PINGROUP(50, pwm01, _, _, _, _, _, _, _, _),
+	PINGROUP(51, pta1_1, pwm11, _, rx1, _, _, _, _, _),
+	PINGROUP(52, pta1_2, pwm21, _, _, _, _, _, _, _),
+	PINGROUP(53, pta1_0, pwm31, prng_rosc, _, _, _, _, _, _),
+	PINGROUP(54, _, _, _, _, _, _, _, _, _),
+	PINGROUP(55, blsp4_uart, blsp4_i2c, blsp4_spi, _, _, _, _, _, _),
+	PINGROUP(56, blsp4_uart, blsp4_i2c, blsp4_spi, _, _, _, _, _, _),
+	PINGROUP(57, blsp4_uart, blsp4_spi, _, _, _, _, _, _, _),
+	PINGROUP(58, blsp4_uart, blsp4_spi, _, _, _, _, _, _, _),
+	PINGROUP(59, pcie0_clk, _, _, cri_trng0, _, _, _, _, _),
+	PINGROUP(60, pcie0_rst, _, _, cri_trng1, _, _, _, _, _),
+	PINGROUP(61, pcie0_wake, _, _, cri_trng, _, _, _, _, _),
+	PINGROUP(62, sd_card, _, _, _, _, _, _, _, _),
+	PINGROUP(63, sd_write, rx0, _, tsens_max, _, _, _, _, _),
+	PINGROUP(64, mdc, _, qdss_tracedata_a, _, _, _, _, _, _),
+	PINGROUP(65, mdio, _, qdss_tracedata_a, _, _, _, _, _, _),
+	PINGROUP(66, pta2_0, wci21, cxc1, qdss_tracedata_a, _, _, _, _, _),
+	PINGROUP(67, pta2_1, qdss_tracedata_a, _, _, _, _, _, _, _),
+	PINGROUP(68, pta2_2, wci21, cxc1, qdss_tracedata_a, _, _, _, _, _),
+	PINGROUP(69, blsp1_uart, blsp1_i2c, blsp1_spi, gcc_plltest, qdss_tracedata_a, _, _, _, _),
+	PINGROUP(70, blsp1_uart, blsp1_i2c, blsp1_spi, gcc_tlmm, qdss_tracedata_a, _, _, _, _),
+	PINGROUP(71, blsp1_uart, blsp1_spi, gcc_plltest, qdss_tracedata_a, _, _, _, _, _),
+	PINGROUP(72, blsp1_uart, blsp1_spi, qdss_tracedata_a, _, _, _, _, _, _),
+	PINGROUP(73, blsp3_uart, blsp3_i2c, blsp3_spi, _, qdss_tracedata_a, _, _, _, _),
+	PINGROUP(74, blsp3_uart, blsp3_i2c, blsp3_spi, _, qdss_tracedata_a, _, _, _, _),
+	PINGROUP(75, blsp3_uart, blsp3_spi, _, qdss_tracedata_a, _, _, _, _, _),
+	PINGROUP(76, blsp3_uart, blsp3_spi, _, qdss_tracedata_a, _, _, _, _, _),
+	PINGROUP(77, blsp3_spi, _, qdss_tracedata_a, _, _, _, _, _, _),
+	PINGROUP(78, blsp3_spi, _, qdss_tracedata_a, _, _, _, _, _, _),
+	PINGROUP(79, blsp3_spi, _, qdss_tracedata_a, _, _, _, _, _, _),
+};
+
+static const struct msm_pinctrl_soc_data ipq6018_pinctrl = {
+	.pins = ipq6018_pins,
+	.npins = ARRAY_SIZE(ipq6018_pins),
+	.functions = ipq6018_functions,
+	.nfunctions = ARRAY_SIZE(ipq6018_functions),
+	.groups = ipq6018_groups,
+	.ngroups = ARRAY_SIZE(ipq6018_groups),
+	.ngpios = 80,
+};
+
+static int ipq6018_pinctrl_probe(struct platform_device *pdev)
+{
+	return msm_pinctrl_probe(pdev, &ipq6018_pinctrl);
+}
+
+static const struct of_device_id ipq6018_pinctrl_of_match[] = {
+	{ .compatible = "qcom,ipq6018-pinctrl", },
+	{ },
+};
+
+static struct platform_driver ipq6018_pinctrl_driver = {
+	.driver = {
+		.name = "ipq6018-pinctrl",
+		.of_match_table = ipq6018_pinctrl_of_match,
+	},
+	.probe = ipq6018_pinctrl_probe,
+	.remove = msm_pinctrl_remove,
+};
+
+static int __init ipq6018_pinctrl_init(void)
+{
+	return platform_driver_register(&ipq6018_pinctrl_driver);
+}
+arch_initcall(ipq6018_pinctrl_init);
+
+static void __exit ipq6018_pinctrl_exit(void)
+{
+	platform_driver_unregister(&ipq6018_pinctrl_driver);
+}
+module_exit(ipq6018_pinctrl_exit);
+
+MODULE_DESCRIPTION("QTI ipq6018 pinctrl driver");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, ipq6018_pinctrl_of_match);
diff --git a/drivers/pinctrl/qcom/pinctrl-ipq8064.c b/drivers/pinctrl/qcom/pinctrl-ipq8064.c
index c2fb1dd..ac717ee 100644
--- a/drivers/pinctrl/qcom/pinctrl-ipq8064.c
+++ b/drivers/pinctrl/qcom/pinctrl-ipq8064.c
@@ -299,7 +299,7 @@ static const char * const gpio_groups[] = {
 };
 
 static const char * const mdio_groups[] = {
-	"gpio0", "gpio1", "gpio10", "gpio11",
+	"gpio0", "gpio1", "gpio2", "gpio10", "gpio11", "gpio66",
 };
 
 static const char * const mi2s_groups[] = {
@@ -403,8 +403,8 @@ static const char * const usb2_hsic_groups[] = {
 };
 
 static const char * const rgmii2_groups[] = {
-	"gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
-	"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62",
+	"gpio2", "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
+	"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62", "gpio66",
 };
 
 static const char * const sata_groups[] = {
@@ -539,7 +539,7 @@ static const struct msm_function ipq8064_functions[] = {
 static const struct msm_pingroup ipq8064_groups[] = {
 	PINGROUP(0, mdio, NA, NA, NA, NA, NA, NA, NA, NA, NA),
 	PINGROUP(1, mdio, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-	PINGROUP(2, gsbi5_spi_cs3, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(2, gsbi5_spi_cs3, rgmii2, mdio, NA, NA, NA, NA, NA, NA, NA),
 	PINGROUP(3, pcie1_rst, pcie1_prsnt, pdm, NA, NA, NA, NA, NA, NA, NA),
 	PINGROUP(4, pcie1_pwren_n, pcie1_pwren, NA, NA, NA, NA, NA, NA, NA, NA),
 	PINGROUP(5, pcie1_clk_req, pcie1_pwrflt, NA, NA, NA, NA, NA, NA, NA, NA),
@@ -603,7 +603,7 @@ static const struct msm_pingroup ipq8064_groups[] = {
 	PINGROUP(63, pcie3_rst, NA, NA, NA, NA, NA, NA, NA, NA, NA),
 	PINGROUP(64, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
 	PINGROUP(65, pcie3_clk_req, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-	PINGROUP(66, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(66, rgmii2, mdio, NA, NA, NA, NA, NA, NA, NA, NA),
 	PINGROUP(67, usb2_hsic, NA, NA, NA, NA, NA, NA, NA, NA, NA),
 	PINGROUP(68, usb2_hsic, NA, NA, NA, NA, NA, NA, NA, NA, NA),
 	SDC_PINGROUP(sdc3_clk, 0x204a, 14, 6),
diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
index 1a948c3..9a398a2 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -22,6 +22,8 @@
 #include <linux/reboot.h>
 #include <linux/pm.h>
 #include <linux/log2.h>
+#include <linux/qcom_scm.h>
+#include <linux/io.h>
 
 #include <linux/soc/qcom/irq.h>
 
@@ -60,6 +62,8 @@ struct msm_pinctrl {
 	struct irq_chip irq_chip;
 	int irq;
 
+	bool intr_target_use_scm;
+
 	raw_spinlock_t lock;
 
 	DECLARE_BITMAP(dual_edge_irqs, MAX_NR_GPIO);
@@ -68,6 +72,7 @@ struct msm_pinctrl {
 
 	const struct msm_pinctrl_soc_data *soc;
 	void __iomem *regs[MAX_NR_TILES];
+	u32 phys_base[MAX_NR_TILES];
 };
 
 #define MSM_ACCESSOR(name) \
@@ -489,8 +494,8 @@ static int msm_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
 
 	val = msm_readl_ctl(pctrl, g);
 
-	/* 0 = output, 1 = input */
-	return val & BIT(g->oe_bit) ? 0 : 1;
+	return val & BIT(g->oe_bit) ? GPIO_LINE_DIRECTION_OUT :
+				      GPIO_LINE_DIRECTION_IN;
 }
 
 static int msm_gpio_get(struct gpio_chip *chip, unsigned offset)
@@ -882,11 +887,30 @@ static int msm_gpio_irq_set_type(struct irq_data *d, unsigned int type)
 	else
 		clear_bit(d->hwirq, pctrl->dual_edge_irqs);
 
-	/* Route interrupts to application cpu */
-	val = msm_readl_intr_target(pctrl, g);
-	val &= ~(7 << g->intr_target_bit);
-	val |= g->intr_target_kpss_val << g->intr_target_bit;
-	msm_writel_intr_target(val, pctrl, g);
+	/* Route interrupts to application cpu.
+	 * With intr_target_use_scm interrupts are routed to
+	 * application cpu using scm calls.
+	 */
+	if (pctrl->intr_target_use_scm) {
+		u32 addr = pctrl->phys_base[0] + g->intr_target_reg;
+		int ret;
+
+		qcom_scm_io_readl(addr, &val);
+
+		val &= ~(7 << g->intr_target_bit);
+		val |= g->intr_target_kpss_val << g->intr_target_bit;
+
+		ret = qcom_scm_io_writel(addr, val);
+		if (ret)
+			dev_err(pctrl->dev,
+				"Failed routing %lu interrupt to Apps proc",
+				d->hwirq);
+	} else {
+		val = msm_readl_intr_target(pctrl, g);
+		val &= ~(7 << g->intr_target_bit);
+		val |= g->intr_target_kpss_val << g->intr_target_bit;
+		msm_writel_intr_target(val, pctrl, g);
+	}
 
 	/* Update configuration for gpio.
 	 * RAW_STATUS_EN is left on for all gpio irqs. Due to the
@@ -1240,6 +1264,9 @@ int msm_pinctrl_probe(struct platform_device *pdev,
 	pctrl->dev = &pdev->dev;
 	pctrl->soc = soc_data;
 	pctrl->chip = msm_gpio_template;
+	pctrl->intr_target_use_scm = of_device_is_compatible(
+					pctrl->dev->of_node,
+					"qcom,ipq8064-pinctrl");
 
 	raw_spin_lock_init(&pctrl->lock);
 
@@ -1252,9 +1279,12 @@ int msm_pinctrl_probe(struct platform_device *pdev,
 				return PTR_ERR(pctrl->regs[i]);
 		}
 	} else {
-		pctrl->regs[0] = devm_platform_ioremap_resource(pdev, 0);
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+		pctrl->regs[0] = devm_ioremap_resource(&pdev->dev, res);
 		if (IS_ERR(pctrl->regs[0]))
 			return PTR_ERR(pctrl->regs[0]);
+
+		pctrl->phys_base[0] = res->start;
 	}
 
 	msm_pinctrl_setup_pm_reset(pctrl);
diff --git a/drivers/pinctrl/sh-pfc/Kconfig b/drivers/pinctrl/sh-pfc/Kconfig
index cf0e0dc..9552851 100644
--- a/drivers/pinctrl/sh-pfc/Kconfig
+++ b/drivers/pinctrl/sh-pfc/Kconfig
@@ -26,8 +26,8 @@
 	select PINCTRL_PFC_R8A7792 if ARCH_R8A7792
 	select PINCTRL_PFC_R8A7793 if ARCH_R8A7793
 	select PINCTRL_PFC_R8A7794 if ARCH_R8A7794
-	select PINCTRL_PFC_R8A77950 if ARCH_R8A77950 || ARCH_R8A7795
-	select PINCTRL_PFC_R8A77951 if ARCH_R8A77951 || ARCH_R8A7795
+	select PINCTRL_PFC_R8A77950 if ARCH_R8A77950
+	select PINCTRL_PFC_R8A77951 if ARCH_R8A77951
 	select PINCTRL_PFC_R8A77960 if ARCH_R8A77960
 	select PINCTRL_PFC_R8A77961 if ARCH_R8A77961
 	select PINCTRL_PFC_R8A77965 if ARCH_R8A77965
diff --git a/drivers/pinctrl/sh-pfc/core.c b/drivers/pinctrl/sh-pfc/core.c
index 8220911..a2e19ef 100644
--- a/drivers/pinctrl/sh-pfc/core.c
+++ b/drivers/pinctrl/sh-pfc/core.c
@@ -726,6 +726,27 @@ static int sh_pfc_suspend_init(struct sh_pfc *pfc) { return 0; }
 #endif /* CONFIG_PM_SLEEP && CONFIG_ARM_PSCI_FW */
 
 #ifdef DEBUG
+#define SH_PFC_MAX_REGS		300
+#define SH_PFC_MAX_ENUMS	3000
+
+static unsigned int sh_pfc_errors __initdata = 0;
+static unsigned int sh_pfc_warnings __initdata = 0;
+static u32 *sh_pfc_regs __initdata = NULL;
+static u32 sh_pfc_num_regs __initdata = 0;
+static u16 *sh_pfc_enums __initdata = NULL;
+static u32 sh_pfc_num_enums __initdata = 0;
+
+#define sh_pfc_err(fmt, ...)					\
+	do {							\
+		pr_err("%s: " fmt, drvname, ##__VA_ARGS__);	\
+		sh_pfc_errors++;				\
+	} while (0)
+#define sh_pfc_warn(fmt, ...)					\
+	do {							\
+		pr_warn("%s: " fmt, drvname, ##__VA_ARGS__);	\
+		sh_pfc_warnings++;				\
+	} while (0)
+
 static bool __init is0s(const u16 *enum_ids, unsigned int n)
 {
 	unsigned int i;
@@ -737,77 +758,181 @@ static bool __init is0s(const u16 *enum_ids, unsigned int n)
 	return true;
 }
 
-static unsigned int sh_pfc_errors __initdata = 0;
-static unsigned int sh_pfc_warnings __initdata = 0;
+static bool __init same_name(const char *a, const char *b)
+{
+	if (!a || !b)
+		return false;
+
+	return !strcmp(a, b);
+}
+
+static void __init sh_pfc_check_reg(const char *drvname, u32 reg)
+{
+	unsigned int i;
+
+	for (i = 0; i < sh_pfc_num_regs; i++)
+		if (reg == sh_pfc_regs[i]) {
+			sh_pfc_err("reg 0x%x conflict\n", reg);
+			return;
+		}
+
+	if (sh_pfc_num_regs == SH_PFC_MAX_REGS) {
+		pr_warn_once("%s: Please increase SH_PFC_MAX_REGS\n", drvname);
+		return;
+	}
+
+	sh_pfc_regs[sh_pfc_num_regs++] = reg;
+}
+
+static int __init sh_pfc_check_enum(const char *drvname, u16 enum_id)
+{
+	unsigned int i;
+
+	for (i = 0; i < sh_pfc_num_enums; i++) {
+		if (enum_id == sh_pfc_enums[i])
+			return -EINVAL;
+	}
+
+	if (sh_pfc_num_enums == SH_PFC_MAX_ENUMS) {
+		pr_warn_once("%s: Please increase SH_PFC_MAX_ENUMS\n", drvname);
+		return 0;
+	}
+
+	sh_pfc_enums[sh_pfc_num_enums++] = enum_id;
+	return 0;
+}
+
+static void __init sh_pfc_check_reg_enums(const char *drvname, u32 reg,
+					  const u16 *enums, unsigned int n)
+{
+	unsigned int i;
+
+	for (i = 0; i < n; i++) {
+		if (enums[i] && sh_pfc_check_enum(drvname, enums[i]))
+			sh_pfc_err("reg 0x%x enum_id %u conflict\n", reg,
+				   enums[i]);
+	}
+}
+
+static void __init sh_pfc_check_pin(const struct sh_pfc_soc_info *info,
+				    u32 reg, unsigned int pin)
+{
+	const char *drvname = info->name;
+	unsigned int i;
+
+	if (pin == SH_PFC_PIN_NONE)
+		return;
+
+	for (i = 0; i < info->nr_pins; i++) {
+		if (pin == info->pins[i].pin)
+			return;
+	}
+
+	sh_pfc_err("reg 0x%x: pin %u not found\n", reg, pin);
+}
 
 static void __init sh_pfc_check_cfg_reg(const char *drvname,
 					const struct pinmux_cfg_reg *cfg_reg)
 {
 	unsigned int i, n, rw, fw;
 
+	sh_pfc_check_reg(drvname, cfg_reg->reg);
+
 	if (cfg_reg->field_width) {
-		/* Checked at build time */
-		return;
+		n = cfg_reg->reg_width / cfg_reg->field_width;
+		/* Skip field checks (done at build time) */
+		goto check_enum_ids;
 	}
 
 	for (i = 0, n = 0, rw = 0; (fw = cfg_reg->var_field_width[i]); i++) {
-		if (fw > 3 && is0s(&cfg_reg->enum_ids[n], 1 << fw)) {
-			pr_warn("%s: reg 0x%x: reserved field [%u:%u] can be split to reduce table size\n",
-				drvname, cfg_reg->reg, rw, rw + fw - 1);
-			sh_pfc_warnings++;
-		}
+		if (fw > 3 && is0s(&cfg_reg->enum_ids[n], 1 << fw))
+			sh_pfc_warn("reg 0x%x: reserved field [%u:%u] can be split to reduce table size\n",
+				    cfg_reg->reg, rw, rw + fw - 1);
 		n += 1 << fw;
 		rw += fw;
 	}
 
-	if (rw != cfg_reg->reg_width) {
-		pr_err("%s: reg 0x%x: var_field_width declares %u instead of %u bits\n",
-		       drvname, cfg_reg->reg, rw, cfg_reg->reg_width);
-		sh_pfc_errors++;
-	}
+	if (rw != cfg_reg->reg_width)
+		sh_pfc_err("reg 0x%x: var_field_width declares %u instead of %u bits\n",
+			   cfg_reg->reg, rw, cfg_reg->reg_width);
 
-	if (n != cfg_reg->nr_enum_ids) {
-		pr_err("%s: reg 0x%x: enum_ids[] has %u instead of %u values\n",
-		       drvname, cfg_reg->reg, cfg_reg->nr_enum_ids, n);
-		sh_pfc_errors++;
+	if (n != cfg_reg->nr_enum_ids)
+		sh_pfc_err("reg 0x%x: enum_ids[] has %u instead of %u values\n",
+			   cfg_reg->reg, cfg_reg->nr_enum_ids, n);
+
+check_enum_ids:
+	sh_pfc_check_reg_enums(drvname, cfg_reg->reg, cfg_reg->enum_ids, n);
+}
+
+static void __init sh_pfc_check_drive_reg(const struct sh_pfc_soc_info *info,
+					  const struct pinmux_drive_reg *drive)
+{
+	const char *drvname = info->name;
+	unsigned long seen = 0, mask;
+	unsigned int i;
+
+	sh_pfc_check_reg(info->name, drive->reg);
+	for (i = 0; i < ARRAY_SIZE(drive->fields); i++) {
+		const struct pinmux_drive_reg_field *field = &drive->fields[i];
+
+		if (!field->pin && !field->offset && !field->size)
+			continue;
+
+		mask = GENMASK(field->offset + field->size, field->offset);
+		if (mask & seen)
+			sh_pfc_err("drive_reg 0x%x: field %u overlap\n",
+				   drive->reg, i);
+		seen |= mask;
+
+		sh_pfc_check_pin(info, drive->reg, field->pin);
 	}
 }
 
+static void __init sh_pfc_check_bias_reg(const struct sh_pfc_soc_info *info,
+					 const struct pinmux_bias_reg *bias)
+{
+	unsigned int i;
+
+	sh_pfc_check_reg(info->name, bias->puen);
+	if (bias->pud)
+		sh_pfc_check_reg(info->name, bias->pud);
+	for (i = 0; i < ARRAY_SIZE(bias->pins); i++)
+		sh_pfc_check_pin(info, bias->puen, bias->pins[i]);
+}
+
 static void __init sh_pfc_check_info(const struct sh_pfc_soc_info *info)
 {
-	const struct sh_pfc_function *func;
 	const char *drvname = info->name;
 	unsigned int *refcnts;
 	unsigned int i, j, k;
 
 	pr_info("Checking %s\n", drvname);
+	sh_pfc_num_regs = 0;
+	sh_pfc_num_enums = 0;
 
 	/* Check pins */
 	for (i = 0; i < info->nr_pins; i++) {
+		const struct sh_pfc_pin *pin = &info->pins[i];
+
+		if (!pin->name) {
+			sh_pfc_err("empty pin %u\n", i);
+			continue;
+		}
 		for (j = 0; j < i; j++) {
-			if (!strcmp(info->pins[i].name, info->pins[j].name)) {
-				pr_err("%s: pin %s/%s: name conflict\n",
-				       drvname, info->pins[i].name,
-				       info->pins[j].name);
-				sh_pfc_errors++;
-			}
+			const struct sh_pfc_pin *pin2 = &info->pins[j];
 
-			if (info->pins[i].pin != (u16)-1 &&
-			    info->pins[i].pin == info->pins[j].pin) {
-				pr_err("%s: pin %s/%s: pin %u conflict\n",
-				       drvname, info->pins[i].name,
-				       info->pins[j].name, info->pins[i].pin);
-				sh_pfc_errors++;
-			}
+			if (same_name(pin->name, pin2->name))
+				sh_pfc_err("pin %s: name conflict\n",
+					   pin->name);
 
-			if (info->pins[i].enum_id &&
-			    info->pins[i].enum_id == info->pins[j].enum_id) {
-				pr_err("%s: pin %s/%s: enum_id %u conflict\n",
-				       drvname, info->pins[i].name,
-				       info->pins[j].name,
-				       info->pins[i].enum_id);
-				sh_pfc_errors++;
-			}
+			if (pin->pin != (u16)-1 && pin->pin == pin2->pin)
+				sh_pfc_err("pin %s/%s: pin %u conflict\n",
+					   pin->name, pin2->name, pin->pin);
+
+			if (pin->enum_id && pin->enum_id == pin2->enum_id)
+				sh_pfc_err("pin %s/%s: enum_id %u conflict\n",
+					   pin->name, pin2->name,
+					   pin->enum_id);
 		}
 	}
 
@@ -817,45 +942,49 @@ static void __init sh_pfc_check_info(const struct sh_pfc_soc_info *info)
 		return;
 
 	for (i = 0; i < info->nr_functions; i++) {
-		func = &info->functions[i];
+		const struct sh_pfc_function *func = &info->functions[i];
+
 		if (!func->name) {
-			pr_err("%s: empty function %u\n", drvname, i);
-			sh_pfc_errors++;
+			sh_pfc_err("empty function %u\n", i);
 			continue;
 		}
+		for (j = 0; j < i; j++) {
+			if (same_name(func->name, info->functions[j].name))
+				sh_pfc_err("function %s: name conflict\n",
+					   func->name);
+		}
 		for (j = 0; j < func->nr_groups; j++) {
 			for (k = 0; k < info->nr_groups; k++) {
-				if (info->groups[k].name &&
-				    !strcmp(func->groups[j],
-					    info->groups[k].name)) {
+				if (same_name(func->groups[j],
+					      info->groups[k].name)) {
 					refcnts[k]++;
 					break;
 				}
 			}
 
-			if (k == info->nr_groups) {
-				pr_err("%s: function %s: group %s not found\n",
-				       drvname, func->name, func->groups[j]);
-				sh_pfc_errors++;
-			}
+			if (k == info->nr_groups)
+				sh_pfc_err("function %s: group %s not found\n",
+					   func->name, func->groups[j]);
 		}
 	}
 
 	for (i = 0; i < info->nr_groups; i++) {
-		if (!info->groups[i].name) {
-			pr_err("%s: empty group %u\n", drvname, i);
-			sh_pfc_errors++;
+		const struct sh_pfc_pin_group *group = &info->groups[i];
+
+		if (!group->name) {
+			sh_pfc_err("empty group %u\n", i);
 			continue;
 		}
-		if (!refcnts[i]) {
-			pr_err("%s: orphan group %s\n", drvname,
-			       info->groups[i].name);
-			sh_pfc_errors++;
-		} else if (refcnts[i] > 1) {
-			pr_warn("%s: group %s referenced by %u functions\n",
-				drvname, info->groups[i].name, refcnts[i]);
-			sh_pfc_warnings++;
+		for (j = 0; j < i; j++) {
+			if (same_name(group->name, info->groups[j].name))
+				sh_pfc_err("group %s: name conflict\n",
+					   group->name);
 		}
+		if (!refcnts[i])
+			sh_pfc_err("orphan group %s\n", group->name);
+		else if (refcnts[i] > 1)
+			sh_pfc_warn("group %s referenced by %u functions\n",
+				    group->name, refcnts[i]);
 	}
 
 	kfree(refcnts);
@@ -863,12 +992,62 @@ static void __init sh_pfc_check_info(const struct sh_pfc_soc_info *info)
 	/* Check config register descriptions */
 	for (i = 0; info->cfg_regs && info->cfg_regs[i].reg; i++)
 		sh_pfc_check_cfg_reg(drvname, &info->cfg_regs[i]);
+
+	/* Check drive strength registers */
+	for (i = 0; info->drive_regs && info->drive_regs[i].reg; i++)
+		sh_pfc_check_drive_reg(info, &info->drive_regs[i]);
+
+	/* Check bias registers */
+	for (i = 0; info->bias_regs && info->bias_regs[i].puen; i++)
+		sh_pfc_check_bias_reg(info, &info->bias_regs[i]);
+
+	/* Check ioctrl registers */
+	for (i = 0; info->ioctrl_regs && info->ioctrl_regs[i].reg; i++)
+		sh_pfc_check_reg(drvname, info->ioctrl_regs[i].reg);
+
+	/* Check data registers */
+	for (i = 0; info->data_regs && info->data_regs[i].reg; i++) {
+		sh_pfc_check_reg(drvname, info->data_regs[i].reg);
+		sh_pfc_check_reg_enums(drvname, info->data_regs[i].reg,
+				       info->data_regs[i].enum_ids,
+				       info->data_regs[i].reg_width);
+	}
+
+#ifdef CONFIG_PINCTRL_SH_FUNC_GPIO
+	/* Check function GPIOs */
+	for (i = 0; i < info->nr_func_gpios; i++) {
+		const struct pinmux_func *func = &info->func_gpios[i];
+
+		if (!func->name) {
+			sh_pfc_err("empty function gpio %u\n", i);
+			continue;
+		}
+		for (j = 0; j < i; j++) {
+			if (same_name(func->name, info->func_gpios[j].name))
+				sh_pfc_err("func_gpio %s: name conflict\n",
+					   func->name);
+		}
+		if (sh_pfc_check_enum(drvname, func->enum_id))
+			sh_pfc_err("%s enum_id %u conflict\n", func->name,
+				   func->enum_id);
+	}
+#endif
 }
 
 static void __init sh_pfc_check_driver(const struct platform_driver *pdrv)
 {
 	unsigned int i;
 
+	sh_pfc_regs = kcalloc(SH_PFC_MAX_REGS, sizeof(*sh_pfc_regs),
+			      GFP_KERNEL);
+	if (!sh_pfc_regs)
+		return;
+
+	sh_pfc_enums = kcalloc(SH_PFC_MAX_ENUMS, sizeof(*sh_pfc_enums),
+			      GFP_KERNEL);
+	if (!sh_pfc_enums)
+		goto free_regs;
+
 	pr_warn("Checking builtin pinmux tables\n");
 
 	for (i = 0; pdrv->id_table[i].name[0]; i++)
@@ -881,6 +1060,10 @@ static void __init sh_pfc_check_driver(const struct platform_driver *pdrv)
 
 	pr_warn("Detected %u errors and %u warnings\n", sh_pfc_errors,
 		sh_pfc_warnings);
+
+	kfree(sh_pfc_enums);
+free_regs:
+	kfree(sh_pfc_regs);
 }
 
 #else /* !DEBUG */
diff --git a/drivers/pinctrl/sh-pfc/gpio.c b/drivers/pinctrl/sh-pfc/gpio.c
index 8213e11..9c6e931 100644
--- a/drivers/pinctrl/sh-pfc/gpio.c
+++ b/drivers/pinctrl/sh-pfc/gpio.c
@@ -205,14 +205,11 @@ static int gpio_pin_to_irq(struct gpio_chip *gc, unsigned offset)
 
 		for (k = 0; gpios[k] >= 0; k++) {
 			if (gpios[k] == offset)
-				goto found;
+				return pfc->irqs[i];
 		}
 	}
 
 	return 0;
-
-found:
-	return pfc->irqs[i];
 }
 
 static int gpio_pin_setup(struct sh_pfc_chip *chip)
diff --git a/drivers/pinctrl/sirf/pinctrl-atlas7.c b/drivers/pinctrl/sirf/pinctrl-atlas7.c
index b1a9611..50df9e0 100644
--- a/drivers/pinctrl/sirf/pinctrl-atlas7.c
+++ b/drivers/pinctrl/sirf/pinctrl-atlas7.c
@@ -352,7 +352,7 @@ struct atlas7_gpio_chip {
 	int nbank;
 	raw_spinlock_t lock;
 	struct gpio_chip chip;
-	struct atlas7_gpio_bank banks[0];
+	struct atlas7_gpio_bank banks[];
 };
 
 /**
diff --git a/drivers/pinctrl/sprd/Kconfig b/drivers/pinctrl/sprd/Kconfig
index b6c5479..eef35d0 100644
--- a/drivers/pinctrl/sprd/Kconfig
+++ b/drivers/pinctrl/sprd/Kconfig
@@ -4,9 +4,7 @@
 #
 
 config PINCTRL_SPRD
-	bool "Spreadtrum pinctrl driver"
-	depends on OF
-	depends on ARCH_SPRD || COMPILE_TEST
+	tristate
 	select PINMUX
 	select PINCONF
 	select GENERIC_PINCONF
@@ -15,7 +13,9 @@
 	  Say Y here to enable Spreadtrum pinctrl driver
 
 config PINCTRL_SPRD_SC9860
-	bool "Spreadtrum SC9860 pinctrl driver"
-	depends on PINCTRL_SPRD
+	tristate "Spreadtrum SC9860 pinctrl driver"
+	depends on OF
+	depends on ARCH_SPRD || COMPILE_TEST
+	select PINCTRL_SPRD
 	help
 	  Say Y here to enable Spreadtrum SC9860 pinctrl driver
diff --git a/drivers/pinctrl/sprd/pinctrl-sprd.c b/drivers/pinctrl/sprd/pinctrl-sprd.c
index 157712ab..48cbf2a 100644
--- a/drivers/pinctrl/sprd/pinctrl-sprd.c
+++ b/drivers/pinctrl/sprd/pinctrl-sprd.c
@@ -464,9 +464,15 @@ static int sprd_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin_id,
 		case PIN_CONFIG_INPUT_ENABLE:
 			arg = (reg >> SLEEP_INPUT_SHIFT) & SLEEP_INPUT_MASK;
 			break;
-		case PIN_CONFIG_OUTPUT:
+		case PIN_CONFIG_OUTPUT_ENABLE:
 			arg = reg & SLEEP_OUTPUT_MASK;
 			break;
+		case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
+			if ((reg & SLEEP_OUTPUT) || (reg & SLEEP_INPUT))
+				return -EINVAL;
+
+			arg = 1;
+			break;
 		case PIN_CONFIG_DRIVE_STRENGTH:
 			arg = (reg >> DRIVE_STRENGTH_SHIFT) &
 				DRIVE_STRENGTH_MASK;
@@ -635,13 +641,23 @@ static int sprd_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin_id,
 					shift = SLEEP_INPUT_SHIFT;
 				}
 				break;
-			case PIN_CONFIG_OUTPUT:
+			case PIN_CONFIG_OUTPUT_ENABLE:
 				if (is_sleep_config == true) {
-					val |= SLEEP_OUTPUT;
+					if (arg > 0)
+						val |= SLEEP_OUTPUT;
+					else
+						val &= ~SLEEP_OUTPUT;
+
 					mask = SLEEP_OUTPUT_MASK;
 					shift = SLEEP_OUTPUT_SHIFT;
 				}
 				break;
+			case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
+				if (is_sleep_config == true) {
+					val = shift = 0;
+					mask = SLEEP_OUTPUT | SLEEP_INPUT;
+				}
+				break;
 			case PIN_CONFIG_DRIVE_STRENGTH:
 				if (arg < 2 || arg > 60)
 					return -EINVAL;
@@ -1090,6 +1106,7 @@ int sprd_pinctrl_core_probe(struct platform_device *pdev,
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(sprd_pinctrl_core_probe);
 
 int sprd_pinctrl_remove(struct platform_device *pdev)
 {
@@ -1098,6 +1115,7 @@ int sprd_pinctrl_remove(struct platform_device *pdev)
 	pinctrl_unregister(sprd_pctl->pctl);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(sprd_pinctrl_remove);
 
 void sprd_pinctrl_shutdown(struct platform_device *pdev)
 {
@@ -1112,6 +1130,7 @@ void sprd_pinctrl_shutdown(struct platform_device *pdev)
 		return;
 	pinctrl_select_state(pinctl, state);
 }
+EXPORT_SYMBOL_GPL(sprd_pinctrl_shutdown);
 
 MODULE_DESCRIPTION("SPREADTRUM Pin Controller Driver");
 MODULE_AUTHOR("Baolin Wang <baolin.wang@spreadtrum.com>");
diff --git a/drivers/pinctrl/stm32/pinctrl-stm32.c b/drivers/pinctrl/stm32/pinctrl-stm32.c
index af3b24f..a657cd8 100644
--- a/drivers/pinctrl/stm32/pinctrl-stm32.c
+++ b/drivers/pinctrl/stm32/pinctrl-stm32.c
@@ -284,9 +284,9 @@ static int stm32_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
 
 	stm32_pmx_get_mode(bank, pin, &mode, &alt);
 	if ((alt == 0) && (mode == 0))
-		ret = 1;
+		ret = GPIO_LINE_DIRECTION_IN;
 	else if ((alt == 0) && (mode == 1))
-		ret = 0;
+		ret = GPIO_LINE_DIRECTION_OUT;
 	else
 		ret = -EINVAL;
 
diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
index b35c324..8e792f8 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
@@ -13,6 +13,7 @@
 #include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/gpio/driver.h>
+#include <linux/interrupt.h>
 #include <linux/irqdomain.h>
 #include <linux/irqchip/chained_irq.h>
 #include <linux/export.h>
@@ -1058,6 +1059,14 @@ static void sunxi_pinctrl_irq_ack_unmask(struct irq_data *d)
 	sunxi_pinctrl_irq_unmask(d);
 }
 
+static int sunxi_pinctrl_irq_set_wake(struct irq_data *d, unsigned int on)
+{
+	struct sunxi_pinctrl *pctl = irq_data_get_irq_chip_data(d);
+	u8 bank = d->hwirq / IRQ_PER_BANK;
+
+	return irq_set_irq_wake(pctl->irq[bank], on);
+}
+
 static struct irq_chip sunxi_pinctrl_edge_irq_chip = {
 	.name		= "sunxi_pio_edge",
 	.irq_ack	= sunxi_pinctrl_irq_ack,
@@ -1066,7 +1075,8 @@ static struct irq_chip sunxi_pinctrl_edge_irq_chip = {
 	.irq_request_resources = sunxi_pinctrl_irq_request_resources,
 	.irq_release_resources = sunxi_pinctrl_irq_release_resources,
 	.irq_set_type	= sunxi_pinctrl_irq_set_type,
-	.flags		= IRQCHIP_SKIP_SET_WAKE,
+	.irq_set_wake	= sunxi_pinctrl_irq_set_wake,
+	.flags		= IRQCHIP_MASK_ON_SUSPEND,
 };
 
 static struct irq_chip sunxi_pinctrl_level_irq_chip = {
@@ -1081,7 +1091,9 @@ static struct irq_chip sunxi_pinctrl_level_irq_chip = {
 	.irq_request_resources = sunxi_pinctrl_irq_request_resources,
 	.irq_release_resources = sunxi_pinctrl_irq_release_resources,
 	.irq_set_type	= sunxi_pinctrl_irq_set_type,
-	.flags		= IRQCHIP_SKIP_SET_WAKE | IRQCHIP_EOI_THREADED |
+	.irq_set_wake	= sunxi_pinctrl_irq_set_wake,
+	.flags		= IRQCHIP_EOI_THREADED |
+			  IRQCHIP_MASK_ON_SUSPEND |
 			  IRQCHIP_EOI_IF_HANDLED,
 };
 
diff --git a/drivers/pinctrl/tegra/pinctrl-tegra.c b/drivers/pinctrl/tegra/pinctrl-tegra.c
index cefbbb8..21661f6 100644
--- a/drivers/pinctrl/tegra/pinctrl-tegra.c
+++ b/drivers/pinctrl/tegra/pinctrl-tegra.c
@@ -275,11 +275,57 @@ static int tegra_pinctrl_set_mux(struct pinctrl_dev *pctldev,
 	return 0;
 }
 
+static int tegra_pinctrl_gpio_request_enable(struct pinctrl_dev *pctldev,
+					     struct pinctrl_gpio_range *range,
+					     unsigned int offset)
+{
+	struct tegra_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);
+	const struct tegra_pingroup *group;
+	u32 value;
+
+	if (!pmx->soc->sfsel_in_mux)
+		return 0;
+
+	group = &pmx->soc->groups[offset];
+
+	if (group->mux_reg < 0 || group->sfsel_bit < 0)
+		return -EINVAL;
+
+	value = pmx_readl(pmx, group->mux_bank, group->mux_reg);
+	value &= ~BIT(group->sfsel_bit);
+	pmx_writel(pmx, value, group->mux_bank, group->mux_reg);
+
+	return 0;
+}
+
+static void tegra_pinctrl_gpio_disable_free(struct pinctrl_dev *pctldev,
+					    struct pinctrl_gpio_range *range,
+					    unsigned int offset)
+{
+	struct tegra_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);
+	const struct tegra_pingroup *group;
+	u32 value;
+
+	if (!pmx->soc->sfsel_in_mux)
+		return;
+
+	group = &pmx->soc->groups[offset];
+
+	if (group->mux_reg < 0 || group->sfsel_bit < 0)
+		return;
+
+	value = pmx_readl(pmx, group->mux_bank, group->mux_reg);
+	value |= BIT(group->sfsel_bit);
+	pmx_writel(pmx, value, group->mux_bank, group->mux_reg);
+}
+
 static const struct pinmux_ops tegra_pinmux_ops = {
 	.get_functions_count = tegra_pinctrl_get_funcs_count,
 	.get_function_name = tegra_pinctrl_get_func_name,
 	.get_function_groups = tegra_pinctrl_get_func_groups,
 	.set_mux = tegra_pinctrl_set_mux,
+	.gpio_request_enable = tegra_pinctrl_gpio_request_enable,
+	.gpio_disable_free = tegra_pinctrl_gpio_disable_free,
 };
 
 static int tegra_pinconf_reg(struct tegra_pmx *pmx,
@@ -689,12 +735,12 @@ const struct dev_pm_ops tegra_pinctrl_pm = {
 	.resume = &tegra_pinctrl_resume
 };
 
-static bool gpio_node_has_range(const char *compatible)
+static bool tegra_pinctrl_gpio_node_has_range(struct tegra_pmx *pmx)
 {
 	struct device_node *np;
 	bool has_prop = false;
 
-	np = of_find_compatible_node(NULL, NULL, compatible);
+	np = of_find_compatible_node(NULL, NULL, pmx->soc->gpio_compatible);
 	if (!np)
 		return has_prop;
 
@@ -794,7 +840,7 @@ int tegra_pinctrl_probe(struct platform_device *pdev,
 
 	tegra_pinctrl_clear_parked_bits(pmx);
 
-	if (!gpio_node_has_range(pmx->soc->gpio_compatible))
+	if (pmx->soc->ngpios > 0 && !tegra_pinctrl_gpio_node_has_range(pmx))
 		pinctrl_add_gpio_range(pmx->pctl, &tegra_pinctrl_gpio_range);
 
 	platform_set_drvdata(pdev, pmx);
diff --git a/drivers/pinctrl/tegra/pinctrl-tegra.h b/drivers/pinctrl/tegra/pinctrl-tegra.h
index 0fc82ee..fcad7f7 100644
--- a/drivers/pinctrl/tegra/pinctrl-tegra.h
+++ b/drivers/pinctrl/tegra/pinctrl-tegra.h
@@ -107,7 +107,8 @@ struct tegra_function {
  *			drvup, slwr, slwf, and drvtype parameters.
  * @drv_bank:		Drive fields register bank.
  * @hsm_bit:		High Speed Mode register bit.
- * @schmitt_bit:	Scmitt register bit.
+ * @sfsel_bit:		GPIO/SFIO selection register bit.
+ * @schmitt_bit:	Schmitt register bit.
  * @lpmd_bit:		Low Power Mode register bit.
  * @drvdn_bit:		Drive Down register bit.
  * @drvdn_width:	Drive Down field width.
@@ -153,6 +154,7 @@ struct tegra_pingroup {
 	s32 ioreset_bit:6;
 	s32 rcv_sel_bit:6;
 	s32 hsm_bit:6;
+	s32 sfsel_bit:6;
 	s32 schmitt_bit:6;
 	s32 lpmd_bit:6;
 	s32 drvdn_bit:6;
@@ -192,6 +194,7 @@ struct tegra_pinctrl_soc_data {
 	bool hsm_in_mux;
 	bool schmitt_in_mux;
 	bool drvtype_in_mux;
+	bool sfsel_in_mux;
 };
 
 extern const struct dev_pm_ops tegra_pinctrl_pm;
diff --git a/drivers/pinctrl/tegra/pinctrl-tegra194.c b/drivers/pinctrl/tegra/pinctrl-tegra194.c
index daf44cf..2e0b5f7 100644
--- a/drivers/pinctrl/tegra/pinctrl-tegra194.c
+++ b/drivers/pinctrl/tegra/pinctrl-tegra194.c
@@ -24,17 +24,14 @@
 
 /* Define unique ID for each pins */
 enum pin_id {
-	TEGRA_PIN_PEX_L5_CLKREQ_N_PGG0 = 256,
-	TEGRA_PIN_PEX_L5_RST_N_PGG1 = 257,
-	TEGRA_PIN_NUM_GPIOS = 258,
+	TEGRA_PIN_PEX_L5_CLKREQ_N_PGG0,
+	TEGRA_PIN_PEX_L5_RST_N_PGG1,
 };
 
 /* Table for pin descriptor */
 static const struct pinctrl_pin_desc tegra194_pins[] = {
-	PINCTRL_PIN(TEGRA_PIN_PEX_L5_CLKREQ_N_PGG0,
-		    "TEGRA_PIN_PEX_L5_CLKREQ_N_PGG0"),
-	PINCTRL_PIN(TEGRA_PIN_PEX_L5_RST_N_PGG1,
-		    "TEGRA_PIN_PEX_L5_RST_N_PGG1"),
+	PINCTRL_PIN(TEGRA_PIN_PEX_L5_CLKREQ_N_PGG0, "PEX_L5_CLKREQ_N_PGG0"),
+	PINCTRL_PIN(TEGRA_PIN_PEX_L5_RST_N_PGG1, "PEX_L5_RST_N_PGG1"),
 };
 
 static const unsigned int pex_l5_clkreq_n_pgg0_pins[] = {
@@ -59,6 +56,7 @@ enum tegra_mux_dt {
 	{					\
 		.name = #lid,			\
 	}
+
 static struct tegra_function tegra194_functions[] = {
 	TEGRA_PIN_FUNCTION(rsvd0),
 	TEGRA_PIN_FUNCTION(rsvd1),
@@ -70,7 +68,7 @@ static struct tegra_function tegra194_functions[] = {
 #define DRV_PINGROUP_ENTRY_Y(r, drvdn_b, drvdn_w, drvup_b,	\
 			     drvup_w, slwr_b, slwr_w, slwf_b,	\
 			     slwf_w, bank)			\
-		.drv_reg = ((r)),			\
+		.drv_reg = ((r)),				\
 		.drv_bank = bank,				\
 		.drvdn_bit = drvdn_b,				\
 		.drvdn_width = drvdn_w,				\
@@ -89,7 +87,7 @@ static struct tegra_function tegra194_functions[] = {
 		.hsm_bit = -1,					\
 		.mux_bank = bank,				\
 		.mux_bit = 0,					\
-		.pupd_reg = ((r)),		\
+		.pupd_reg = ((r)),				\
 		.pupd_bank = bank,				\
 		.pupd_bit = 2,					\
 		.tri_reg = ((r)),				\
@@ -97,6 +95,7 @@ static struct tegra_function tegra194_functions[] = {
 		.tri_bit = 4,					\
 		.einput_bit = e_input,				\
 		.odrain_bit = e_od,				\
+		.sfsel_bit = 10,				\
 		.schmitt_bit = schmitt_b,			\
 		.drvtype_bit = 13,				\
 		.drv_reg = -1,					\
@@ -109,20 +108,20 @@ static struct tegra_function tegra194_functions[] = {
 
 #define PINGROUP(pg_name, f0, f1, f2, f3, r, bank, pupd, e_lpbk,	\
 		 e_input, e_lpdr, e_od, schmitt_b, drvtype, io_rail)	\
-	{							\
-		.name = #pg_name,				\
-		.pins = pg_name##_pins,				\
-		.npins = ARRAY_SIZE(pg_name##_pins),		\
-			.funcs = {				\
-				TEGRA_MUX_##f0,			\
-				TEGRA_MUX_##f1,			\
-				TEGRA_MUX_##f2,			\
-				TEGRA_MUX_##f3,			\
-			},					\
-		PIN_PINGROUP_ENTRY_Y(r, bank, pupd, e_lpbk,	\
-				     e_input, e_od,		\
-				     schmitt_b, drvtype),	\
-		drive_##pg_name,				\
+	{								\
+		.name = #pg_name,					\
+		.pins = pg_name##_pins,					\
+		.npins = ARRAY_SIZE(pg_name##_pins),			\
+			.funcs = {					\
+				TEGRA_MUX_##f0,				\
+				TEGRA_MUX_##f1,				\
+				TEGRA_MUX_##f2,				\
+				TEGRA_MUX_##f3,				\
+			},						\
+		PIN_PINGROUP_ENTRY_Y(r, bank, pupd, e_lpbk,		\
+				     e_input, e_od,			\
+				     schmitt_b, drvtype),		\
+		drive_##pg_name,					\
 	}
 
 static const struct tegra_pingroup tegra194_groups[] = {
@@ -133,7 +132,6 @@ static const struct tegra_pingroup tegra194_groups[] = {
 };
 
 static const struct tegra_pinctrl_soc_data tegra194_pinctrl = {
-	.ngpios = TEGRA_PIN_NUM_GPIOS,
 	.pins = tegra194_pins,
 	.npins = ARRAY_SIZE(tegra194_pins),
 	.functions = tegra194_functions,
@@ -143,6 +141,7 @@ static const struct tegra_pinctrl_soc_data tegra194_pinctrl = {
 	.hsm_in_mux = true,
 	.schmitt_in_mux = true,
 	.drvtype_in_mux = true,
+	.sfsel_in_mux = true,
 };
 
 static int tegra194_pinctrl_probe(struct platform_device *pdev)
diff --git a/drivers/pinctrl/uniphier/pinctrl-uniphier-core.c b/drivers/pinctrl/uniphier/pinctrl-uniphier-core.c
index 57babf3..ade348b 100644
--- a/drivers/pinctrl/uniphier/pinctrl-uniphier-core.c
+++ b/drivers/pinctrl/uniphier/pinctrl-uniphier-core.c
@@ -29,7 +29,7 @@ struct uniphier_pinctrl_reg_region {
 	struct list_head node;
 	unsigned int base;
 	unsigned int nregs;
-	u32 vals[0];
+	u32 vals[];
 };
 
 struct uniphier_pinctrl_priv {
diff --git a/drivers/pinctrl/vt8500/pinctrl-wmt.c b/drivers/pinctrl/vt8500/pinctrl-wmt.c
index ea910a1..65b97e2 100644
--- a/drivers/pinctrl/vt8500/pinctrl-wmt.c
+++ b/drivers/pinctrl/vt8500/pinctrl-wmt.c
@@ -486,8 +486,10 @@ static int wmt_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
 	u32 val;
 
 	val = readl_relaxed(data->base + reg_dir);
-	/* Return 0 == output, 1 == input */
-	return !(val & BIT(bit));
+	if (val & BIT(bit))
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
 }
 
 static int wmt_gpio_get_value(struct gpio_chip *chip, unsigned offset)
diff --git a/drivers/platform/chrome/Kconfig b/drivers/platform/chrome/Kconfig
index 5f57282..03ea512 100644
--- a/drivers/platform/chrome/Kconfig
+++ b/drivers/platform/chrome/Kconfig
@@ -7,7 +7,7 @@
 	tristate "Platform support for Chrome hardware (transitional)"
 	select CHROME_PLATFORMS
 	select CROS_EC
-	select CONFIG_MFD_CROS_EC_DEV
+	select MFD_CROS_EC_DEV
 	depends on X86 || ARM || ARM64 || COMPILE_TEST
 	help
 	  This is a transitional Kconfig option and will be removed after
@@ -214,6 +214,17 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called cros_ec_sysfs.
 
+config CROS_EC_TYPEC
+	tristate "ChromeOS EC Type-C Connector Control"
+	depends on MFD_CROS_EC_DEV && TYPEC
+	default MFD_CROS_EC_DEV
+	help
+	  If you say Y here, you get support for accessing Type C connector
+	  information from the Chrome OS EC.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called cros_ec_typec.
+
 config CROS_USBPD_LOGGER
 	tristate "Logging driver for USB PD charger"
 	depends on CHARGER_CROS_USBPD
@@ -226,6 +237,20 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called cros_usbpd_logger.
 
+config CROS_USBPD_NOTIFY
+	tristate "ChromeOS Type-C power delivery event notifier"
+	depends on MFD_CROS_EC_DEV
+	default MFD_CROS_EC_DEV
+	help
+	  If you say Y here, you get support for Type-C PD event notifications
+	  from the ChromeOS EC. On ACPI platorms this driver will bind to the
+	  GOOG0003 ACPI device, and on platforms which don't have this device it
+	  will get initialized on ECs which support the feature
+	  EC_FEATURE_USB_PD.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cros_usbpd_notify.
+
 source "drivers/platform/chrome/wilco_ec/Kconfig"
 
 endif # CHROMEOS_PLATFORMS
diff --git a/drivers/platform/chrome/Makefile b/drivers/platform/chrome/Makefile
index aacd592..41baccb 100644
--- a/drivers/platform/chrome/Makefile
+++ b/drivers/platform/chrome/Makefile
@@ -12,6 +12,7 @@
 obj-$(CONFIG_CROS_EC_RPMSG)		+= cros_ec_rpmsg.o
 obj-$(CONFIG_CROS_EC_SPI)		+= cros_ec_spi.o
 cros_ec_lpcs-objs			:= cros_ec_lpc.o cros_ec_lpc_mec.o
+obj-$(CONFIG_CROS_EC_TYPEC)		+= cros_ec_typec.o
 obj-$(CONFIG_CROS_EC_LPC)		+= cros_ec_lpcs.o
 obj-$(CONFIG_CROS_EC_PROTO)		+= cros_ec_proto.o cros_ec_trace.o
 obj-$(CONFIG_CROS_KBD_LED_BACKLIGHT)	+= cros_kbd_led_backlight.o
@@ -19,8 +20,10 @@
 obj-$(CONFIG_CROS_EC_LIGHTBAR)		+= cros_ec_lightbar.o
 obj-$(CONFIG_CROS_EC_VBC)		+= cros_ec_vbc.o
 obj-$(CONFIG_CROS_EC_DEBUGFS)		+= cros_ec_debugfs.o
-obj-$(CONFIG_CROS_EC_SENSORHUB)		+= cros_ec_sensorhub.o
+cros-ec-sensorhub-objs			:= cros_ec_sensorhub.o cros_ec_sensorhub_ring.o
+obj-$(CONFIG_CROS_EC_SENSORHUB)		+= cros-ec-sensorhub.o
 obj-$(CONFIG_CROS_EC_SYSFS)		+= cros_ec_sysfs.o
 obj-$(CONFIG_CROS_USBPD_LOGGER)		+= cros_usbpd_logger.o
+obj-$(CONFIG_CROS_USBPD_NOTIFY)		+= cros_usbpd_notify.o
 
 obj-$(CONFIG_WILCO_EC)			+= wilco_ec/
diff --git a/drivers/platform/chrome/chromeos_laptop.c b/drivers/platform/chrome/chromeos_laptop.c
index 4f3651f..472a03d 100644
--- a/drivers/platform/chrome/chromeos_laptop.c
+++ b/drivers/platform/chrome/chromeos_laptop.c
@@ -103,7 +103,7 @@ chromes_laptop_instantiate_i2c_device(struct i2c_adapter *adapter,
 			pr_debug("%d-%02x is probed at %02x\n",
 				 adapter->nr, info->addr, dummy->addr);
 			i2c_unregister_device(dummy);
-			client = i2c_new_device(adapter, info);
+			client = i2c_new_client_device(adapter, info);
 		}
 	}
 
diff --git a/drivers/platform/chrome/cros_ec.c b/drivers/platform/chrome/cros_ec.c
index 6fc8f2c..3104680 100644
--- a/drivers/platform/chrome/cros_ec.c
+++ b/drivers/platform/chrome/cros_ec.c
@@ -120,7 +120,7 @@ static int cros_ec_sleep_event(struct cros_ec_device *ec_dev, u8 sleep_event)
 
 	buf.msg.command = EC_CMD_HOST_SLEEP_EVENT;
 
-	ret = cros_ec_cmd_xfer(ec_dev, &buf.msg);
+	ret = cros_ec_cmd_xfer_status(ec_dev, &buf.msg);
 
 	/* For now, report failure to transition to S0ix with a warning. */
 	if (ret >= 0 && ec_dev->host_sleep_v1 &&
@@ -138,6 +138,24 @@ static int cros_ec_sleep_event(struct cros_ec_device *ec_dev, u8 sleep_event)
 	return ret;
 }
 
+static int cros_ec_ready_event(struct notifier_block *nb,
+			       unsigned long queued_during_suspend,
+			       void *_notify)
+{
+	struct cros_ec_device *ec_dev = container_of(nb, struct cros_ec_device,
+						     notifier_ready);
+	u32 host_event = cros_ec_get_host_event(ec_dev);
+
+	if (host_event & EC_HOST_EVENT_MASK(EC_HOST_EVENT_INTERFACE_READY)) {
+		mutex_lock(&ec_dev->lock);
+		cros_ec_query_all(ec_dev);
+		mutex_unlock(&ec_dev->lock);
+		return NOTIFY_OK;
+	}
+
+	return NOTIFY_DONE;
+}
+
 /**
  * cros_ec_register() - Register a new ChromeOS EC, using the provided info.
  * @ec_dev: Device to register.
@@ -237,6 +255,18 @@ int cros_ec_register(struct cros_ec_device *ec_dev)
 		dev_dbg(ec_dev->dev, "Error %d clearing sleep event to ec",
 			err);
 
+	if (ec_dev->mkbp_event_supported) {
+		/*
+		 * Register the notifier for EC_HOST_EVENT_INTERFACE_READY
+		 * event.
+		 */
+		ec_dev->notifier_ready.notifier_call = cros_ec_ready_event;
+		err = blocking_notifier_chain_register(&ec_dev->event_notifier,
+						      &ec_dev->notifier_ready);
+		if (err)
+			return err;
+	}
+
 	dev_info(dev, "Chrome EC device registered\n");
 
 	return 0;
diff --git a/drivers/platform/chrome/cros_ec_chardev.c b/drivers/platform/chrome/cros_ec_chardev.c
index c65e70b..e0bce86 100644
--- a/drivers/platform/chrome/cros_ec_chardev.c
+++ b/drivers/platform/chrome/cros_ec_chardev.c
@@ -48,7 +48,7 @@ struct ec_event {
 	struct list_head node;
 	size_t size;
 	u8 event_type;
-	u8 data[0];
+	u8 data[];
 };
 
 static int ec_get_version(struct cros_ec_dev *ec, char *str, int maxlen)
@@ -301,7 +301,7 @@ static long cros_ec_chardev_ioctl_xcmd(struct cros_ec_dev *ec, void __user *arg)
 	}
 
 	s_cmd->command += ec->cmd_offset;
-	ret = cros_ec_cmd_xfer(ec->ec_dev, s_cmd);
+	ret = cros_ec_cmd_xfer_status(ec->ec_dev, s_cmd);
 	/* Only copy data to userland if data was received. */
 	if (ret < 0)
 		goto exit;
diff --git a/drivers/platform/chrome/cros_ec_lightbar.c b/drivers/platform/chrome/cros_ec_lightbar.c
index b4c110c..b59180b 100644
--- a/drivers/platform/chrome/cros_ec_lightbar.c
+++ b/drivers/platform/chrome/cros_ec_lightbar.c
@@ -116,7 +116,7 @@ static int get_lightbar_version(struct cros_ec_dev *ec,
 
 	param = (struct ec_params_lightbar *)msg->data;
 	param->cmd = LIGHTBAR_CMD_VERSION;
-	ret = cros_ec_cmd_xfer(ec->ec_dev, msg);
+	ret = cros_ec_cmd_xfer_status(ec->ec_dev, msg);
 	if (ret < 0) {
 		ret = 0;
 		goto exit;
@@ -193,15 +193,10 @@ static ssize_t brightness_store(struct device *dev,
 	if (ret)
 		goto exit;
 
-	ret = cros_ec_cmd_xfer(ec->ec_dev, msg);
+	ret = cros_ec_cmd_xfer_status(ec->ec_dev, msg);
 	if (ret < 0)
 		goto exit;
 
-	if (msg->result != EC_RES_SUCCESS) {
-		ret = -EINVAL;
-		goto exit;
-	}
-
 	ret = count;
 exit:
 	kfree(msg);
@@ -258,13 +253,10 @@ static ssize_t led_rgb_store(struct device *dev, struct device_attribute *attr,
 					goto exit;
 			}
 
-			ret = cros_ec_cmd_xfer(ec->ec_dev, msg);
+			ret = cros_ec_cmd_xfer_status(ec->ec_dev, msg);
 			if (ret < 0)
 				goto exit;
 
-			if (msg->result != EC_RES_SUCCESS)
-				goto exit;
-
 			i = 0;
 			ok = 1;
 		}
@@ -305,14 +297,13 @@ static ssize_t sequence_show(struct device *dev,
 	if (ret)
 		goto exit;
 
-	ret = cros_ec_cmd_xfer(ec->ec_dev, msg);
-	if (ret < 0)
-		goto exit;
-
-	if (msg->result != EC_RES_SUCCESS) {
+	ret = cros_ec_cmd_xfer_status(ec->ec_dev, msg);
+	if (ret == -EPROTO) {
 		ret = scnprintf(buf, PAGE_SIZE,
 				"ERROR: EC returned %d\n", msg->result);
 		goto exit;
+	} else if (ret < 0) {
+		goto exit;
 	}
 
 	resp = (struct ec_response_lightbar *)msg->data;
@@ -344,13 +335,10 @@ static int lb_send_empty_cmd(struct cros_ec_dev *ec, uint8_t cmd)
 	if (ret)
 		goto error;
 
-	ret = cros_ec_cmd_xfer(ec->ec_dev, msg);
+	ret = cros_ec_cmd_xfer_status(ec->ec_dev, msg);
 	if (ret < 0)
 		goto error;
-	if (msg->result != EC_RES_SUCCESS) {
-		ret = -EINVAL;
-		goto error;
-	}
+
 	ret = 0;
 error:
 	kfree(msg);
@@ -377,13 +365,10 @@ static int lb_manual_suspend_ctrl(struct cros_ec_dev *ec, uint8_t enable)
 	if (ret)
 		goto error;
 
-	ret = cros_ec_cmd_xfer(ec->ec_dev, msg);
+	ret = cros_ec_cmd_xfer_status(ec->ec_dev, msg);
 	if (ret < 0)
 		goto error;
-	if (msg->result != EC_RES_SUCCESS) {
-		ret = -EINVAL;
-		goto error;
-	}
+
 	ret = 0;
 error:
 	kfree(msg);
@@ -425,15 +410,10 @@ static ssize_t sequence_store(struct device *dev, struct device_attribute *attr,
 	if (ret)
 		goto exit;
 
-	ret = cros_ec_cmd_xfer(ec->ec_dev, msg);
+	ret = cros_ec_cmd_xfer_status(ec->ec_dev, msg);
 	if (ret < 0)
 		goto exit;
 
-	if (msg->result != EC_RES_SUCCESS) {
-		ret = -EINVAL;
-		goto exit;
-	}
-
 	ret = count;
 exit:
 	kfree(msg);
@@ -487,13 +467,9 @@ static ssize_t program_store(struct device *dev, struct device_attribute *attr,
 	 */
 	msg->outsize = count + extra_bytes;
 
-	ret = cros_ec_cmd_xfer(ec->ec_dev, msg);
+	ret = cros_ec_cmd_xfer_status(ec->ec_dev, msg);
 	if (ret < 0)
 		goto exit;
-	if (msg->result != EC_RES_SUCCESS) {
-		ret = -EINVAL;
-		goto exit;
-	}
 
 	ret = count;
 exit:
diff --git a/drivers/platform/chrome/cros_ec_proto.c b/drivers/platform/chrome/cros_ec_proto.c
index 3cfa643..3e745e0 100644
--- a/drivers/platform/chrome/cros_ec_proto.c
+++ b/drivers/platform/chrome/cros_ec_proto.c
@@ -553,7 +553,10 @@ EXPORT_SYMBOL(cros_ec_cmd_xfer);
  * replied with success status. It's not necessary to check msg->result when
  * using this function.
  *
- * Return: The number of bytes transferred on success or negative error code.
+ * Return:
+ * >=0 - The number of bytes transferred
+ * -ENOTSUPP - Operation not supported
+ * -EPROTO - Protocol error
  */
 int cros_ec_cmd_xfer_status(struct cros_ec_device *ec_dev,
 			    struct cros_ec_command *msg)
@@ -563,6 +566,10 @@ int cros_ec_cmd_xfer_status(struct cros_ec_device *ec_dev,
 	ret = cros_ec_cmd_xfer(ec_dev, msg);
 	if (ret < 0) {
 		dev_err(ec_dev->dev, "Command xfer error (err:%d)\n", ret);
+	} else if (msg->result == EC_RES_INVALID_VERSION) {
+		dev_dbg(ec_dev->dev, "Command invalid version (err:%d)\n",
+			msg->result);
+		return -ENOTSUPP;
 	} else if (msg->result != EC_RES_SUCCESS) {
 		dev_dbg(ec_dev->dev, "Command result (err: %d)\n", msg->result);
 		return -EPROTO;
diff --git a/drivers/platform/chrome/cros_ec_rpmsg.c b/drivers/platform/chrome/cros_ec_rpmsg.c
index dbc3f55..7e8629e 100644
--- a/drivers/platform/chrome/cros_ec_rpmsg.c
+++ b/drivers/platform/chrome/cros_ec_rpmsg.c
@@ -44,6 +44,8 @@ struct cros_ec_rpmsg {
 	struct completion xfer_ack;
 	struct work_struct host_event_work;
 	struct rpmsg_endpoint *ept;
+	bool has_pending_host_event;
+	bool probe_done;
 };
 
 /**
@@ -177,7 +179,14 @@ static int cros_ec_rpmsg_callback(struct rpmsg_device *rpdev, void *data,
 		memcpy(ec_dev->din, resp->data, len);
 		complete(&ec_rpmsg->xfer_ack);
 	} else if (resp->type == HOST_EVENT_MARK) {
-		schedule_work(&ec_rpmsg->host_event_work);
+		/*
+		 * If the host event is sent before cros_ec_register is
+		 * finished, queue the host event.
+		 */
+		if (ec_rpmsg->probe_done)
+			schedule_work(&ec_rpmsg->host_event_work);
+		else
+			ec_rpmsg->has_pending_host_event = true;
 	} else {
 		dev_warn(ec_dev->dev, "rpmsg received invalid type = %d",
 			 resp->type);
@@ -240,6 +249,11 @@ static int cros_ec_rpmsg_probe(struct rpmsg_device *rpdev)
 		return ret;
 	}
 
+	ec_rpmsg->probe_done = true;
+
+	if (ec_rpmsg->has_pending_host_event)
+		schedule_work(&ec_rpmsg->host_event_work);
+
 	return 0;
 }
 
diff --git a/drivers/platform/chrome/cros_ec_sensorhub.c b/drivers/platform/chrome/cros_ec_sensorhub.c
index 79fefd3..b7f2c00 100644
--- a/drivers/platform/chrome/cros_ec_sensorhub.c
+++ b/drivers/platform/chrome/cros_ec_sensorhub.c
@@ -50,10 +50,8 @@ static int cros_ec_sensorhub_register(struct device *dev,
 				      struct cros_ec_sensorhub *sensorhub)
 {
 	int sensor_type[MOTIONSENSE_TYPE_MAX] = { 0 };
+	struct cros_ec_command *msg = sensorhub->msg;
 	struct cros_ec_dev *ec = sensorhub->ec;
-	struct ec_params_motion_sense *params;
-	struct ec_response_motion_sense *resp;
-	struct cros_ec_command *msg;
 	int ret, i, sensor_num;
 	char *name;
 
@@ -65,27 +63,19 @@ static int cros_ec_sensorhub_register(struct device *dev,
 		return sensor_num;
 	}
 
+	sensorhub->sensor_num = sensor_num;
 	if (sensor_num == 0) {
 		dev_err(dev, "Zero sensors reported.\n");
 		return -EINVAL;
 	}
 
-	/* Prepare a message to send INFO command to each sensor. */
-	msg = kzalloc(sizeof(*msg) + max(sizeof(*params), sizeof(*resp)),
-		      GFP_KERNEL);
-	if (!msg)
-		return -ENOMEM;
-
 	msg->version = 1;
-	msg->command = EC_CMD_MOTION_SENSE_CMD + ec->cmd_offset;
-	msg->outsize = sizeof(*params);
-	msg->insize = sizeof(*resp);
-	params = (struct ec_params_motion_sense *)msg->data;
-	resp = (struct ec_response_motion_sense *)msg->data;
+	msg->insize = sizeof(struct ec_response_motion_sense);
+	msg->outsize = sizeof(struct ec_params_motion_sense);
 
 	for (i = 0; i < sensor_num; i++) {
-		params->cmd = MOTIONSENSE_CMD_INFO;
-		params->info.sensor_num = i;
+		sensorhub->params->cmd = MOTIONSENSE_CMD_INFO;
+		sensorhub->params->info.sensor_num = i;
 
 		ret = cros_ec_cmd_xfer_status(ec->ec_dev, msg);
 		if (ret < 0) {
@@ -94,7 +84,7 @@ static int cros_ec_sensorhub_register(struct device *dev,
 			continue;
 		}
 
-		switch (resp->info.type) {
+		switch (sensorhub->resp->info.type) {
 		case MOTIONSENSE_TYPE_ACCEL:
 			name = "cros-ec-accel";
 			break;
@@ -117,15 +107,16 @@ static int cros_ec_sensorhub_register(struct device *dev,
 			name = "cros-ec-activity";
 			break;
 		default:
-			dev_warn(dev, "unknown type %d\n", resp->info.type);
+			dev_warn(dev, "unknown type %d\n",
+				 sensorhub->resp->info.type);
 			continue;
 		}
 
 		ret = cros_ec_sensorhub_allocate_sensor(dev, name, i);
 		if (ret)
-			goto error;
+			return ret;
 
-		sensor_type[resp->info.type]++;
+		sensor_type[sensorhub->resp->info.type]++;
 	}
 
 	if (sensor_type[MOTIONSENSE_TYPE_ACCEL] >= 2)
@@ -137,29 +128,41 @@ static int cros_ec_sensorhub_register(struct device *dev,
 							"cros-ec-lid-angle",
 							0);
 		if (ret)
-			goto error;
+			return ret;
 	}
 
-	kfree(msg);
 	return 0;
-
-error:
-	kfree(msg);
-	return ret;
 }
 
 static int cros_ec_sensorhub_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
+	struct cros_ec_dev *ec = dev_get_drvdata(dev->parent);
 	struct cros_ec_sensorhub *data;
+	struct cros_ec_command *msg;
 	int ret;
 	int i;
 
+	msg = devm_kzalloc(dev, sizeof(struct cros_ec_command) +
+			   max((u16)sizeof(struct ec_params_motion_sense),
+			       ec->ec_dev->max_response), GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
+
+	msg->command = EC_CMD_MOTION_SENSE_CMD + ec->cmd_offset;
+
 	data = devm_kzalloc(dev, sizeof(struct cros_ec_sensorhub), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
 
-	data->ec = dev_get_drvdata(dev->parent);
+	mutex_init(&data->cmd_lock);
+
+	data->dev = dev;
+	data->ec = ec;
+	data->msg = msg;
+	data->params = (struct ec_params_motion_sense *)msg->data;
+	data->resp = (struct ec_response_motion_sense *)msg->data;
+
 	dev_set_drvdata(dev, data);
 
 	/* Check whether this EC is a sensor hub. */
@@ -172,7 +175,8 @@ static int cros_ec_sensorhub_probe(struct platform_device *pdev)
 		 * If the device has sensors but does not claim to
 		 * be a sensor hub, we are in legacy mode.
 		 */
-		for (i = 0; i < 2; i++) {
+		data->sensor_num = 2;
+		for (i = 0; i < data->sensor_num; i++) {
 			ret = cros_ec_sensorhub_allocate_sensor(dev,
 						"cros-ec-accel-legacy", i);
 			if (ret)
@@ -180,12 +184,63 @@ static int cros_ec_sensorhub_probe(struct platform_device *pdev)
 		}
 	}
 
+	/*
+	 * If the EC does not have a FIFO, the sensors will query their data
+	 * themselves via sysfs or a software trigger.
+	 */
+	if (cros_ec_check_features(ec, EC_FEATURE_MOTION_SENSE_FIFO)) {
+		ret = cros_ec_sensorhub_ring_add(data);
+		if (ret)
+			return ret;
+		/*
+		 * The msg and its data is not under the control of the ring
+		 * handler.
+		 */
+		return devm_add_action_or_reset(dev,
+						cros_ec_sensorhub_ring_remove,
+						data);
+	}
+
 	return 0;
 }
 
+#ifdef CONFIG_PM_SLEEP
+/*
+ * When the EC is suspending, we must stop sending interrupt,
+ * we may use the same interrupt line for waking up the device.
+ * Tell the EC to stop sending non-interrupt event on the iio ring.
+ */
+static int cros_ec_sensorhub_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct cros_ec_sensorhub *sensorhub = platform_get_drvdata(pdev);
+	struct cros_ec_dev *ec = sensorhub->ec;
+
+	if (cros_ec_check_features(ec, EC_FEATURE_MOTION_SENSE_FIFO))
+		return cros_ec_sensorhub_ring_fifo_enable(sensorhub, false);
+	return 0;
+}
+
+static int cros_ec_sensorhub_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct cros_ec_sensorhub *sensorhub = platform_get_drvdata(pdev);
+	struct cros_ec_dev *ec = sensorhub->ec;
+
+	if (cros_ec_check_features(ec, EC_FEATURE_MOTION_SENSE_FIFO))
+		return cros_ec_sensorhub_ring_fifo_enable(sensorhub, true);
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(cros_ec_sensorhub_pm_ops,
+		cros_ec_sensorhub_suspend,
+		cros_ec_sensorhub_resume);
+
 static struct platform_driver cros_ec_sensorhub_driver = {
 	.driver = {
 		.name = DRV_NAME,
+		.pm = &cros_ec_sensorhub_pm_ops,
 	},
 	.probe = cros_ec_sensorhub_probe,
 };
diff --git a/drivers/platform/chrome/cros_ec_sensorhub_ring.c b/drivers/platform/chrome/cros_ec_sensorhub_ring.c
new file mode 100644
index 0000000..c48e5b3
--- /dev/null
+++ b/drivers/platform/chrome/cros_ec_sensorhub_ring.c
@@ -0,0 +1,1046 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for Chrome OS EC Sensor hub FIFO.
+ *
+ * Copyright 2020 Google LLC
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/iio/iio.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
+#include <linux/platform_data/cros_ec_sensorhub.h>
+#include <linux/platform_device.h>
+#include <linux/sort.h>
+#include <linux/slab.h>
+
+/* Precision of fixed point for the m values from the filter */
+#define M_PRECISION BIT(23)
+
+/* Only activate the filter once we have at least this many elements. */
+#define TS_HISTORY_THRESHOLD 8
+
+/*
+ * If we don't have any history entries for this long, empty the filter to
+ * make sure there are no big discontinuities.
+ */
+#define TS_HISTORY_BORED_US 500000
+
+/* To measure by how much the filter is overshooting, if it happens. */
+#define FUTURE_TS_ANALYTICS_COUNT_MAX 100
+
+static inline int
+cros_sensorhub_send_sample(struct cros_ec_sensorhub *sensorhub,
+			   struct cros_ec_sensors_ring_sample *sample)
+{
+	cros_ec_sensorhub_push_data_cb_t cb;
+	int id = sample->sensor_id;
+	struct iio_dev *indio_dev;
+
+	if (id >= sensorhub->sensor_num)
+		return -EINVAL;
+
+	cb = sensorhub->push_data[id].push_data_cb;
+	if (!cb)
+		return 0;
+
+	indio_dev = sensorhub->push_data[id].indio_dev;
+
+	if (sample->flag & MOTIONSENSE_SENSOR_FLAG_FLUSH)
+		return 0;
+
+	return cb(indio_dev, sample->vector, sample->timestamp);
+}
+
+/**
+ * cros_ec_sensorhub_register_push_data() - register the callback to the hub.
+ *
+ * @sensorhub : Sensor Hub object
+ * @sensor_num : The sensor the caller is interested in.
+ * @indio_dev : The iio device to use when a sample arrives.
+ * @cb : The callback to call when a sample arrives.
+ *
+ * The callback cb will be used by cros_ec_sensorhub_ring to distribute events
+ * from the EC.
+ *
+ * Return: 0 when callback is registered.
+ *         EINVAL is the sensor number is invalid or the slot already used.
+ */
+int cros_ec_sensorhub_register_push_data(struct cros_ec_sensorhub *sensorhub,
+					 u8 sensor_num,
+					 struct iio_dev *indio_dev,
+					 cros_ec_sensorhub_push_data_cb_t cb)
+{
+	if (sensor_num >= sensorhub->sensor_num)
+		return -EINVAL;
+	if (sensorhub->push_data[sensor_num].indio_dev)
+		return -EINVAL;
+
+	sensorhub->push_data[sensor_num].indio_dev = indio_dev;
+	sensorhub->push_data[sensor_num].push_data_cb = cb;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cros_ec_sensorhub_register_push_data);
+
+void cros_ec_sensorhub_unregister_push_data(struct cros_ec_sensorhub *sensorhub,
+					    u8 sensor_num)
+{
+	sensorhub->push_data[sensor_num].indio_dev = NULL;
+	sensorhub->push_data[sensor_num].push_data_cb = NULL;
+}
+EXPORT_SYMBOL_GPL(cros_ec_sensorhub_unregister_push_data);
+
+/**
+ * cros_ec_sensorhub_ring_fifo_enable() - Enable or disable interrupt generation
+ *					  for FIFO events.
+ * @sensorhub: Sensor Hub object
+ * @on: true when events are requested.
+ *
+ * To be called before sleeping or when noone is listening.
+ * Return: 0 on success, or an error when we can not communicate with the EC.
+ *
+ */
+int cros_ec_sensorhub_ring_fifo_enable(struct cros_ec_sensorhub *sensorhub,
+				       bool on)
+{
+	int ret, i;
+
+	mutex_lock(&sensorhub->cmd_lock);
+	if (sensorhub->tight_timestamps)
+		for (i = 0; i < sensorhub->sensor_num; i++)
+			sensorhub->batch_state[i].last_len = 0;
+
+	sensorhub->params->cmd = MOTIONSENSE_CMD_FIFO_INT_ENABLE;
+	sensorhub->params->fifo_int_enable.enable = on;
+
+	sensorhub->msg->outsize = sizeof(struct ec_params_motion_sense);
+	sensorhub->msg->insize = sizeof(struct ec_response_motion_sense);
+
+	ret = cros_ec_cmd_xfer_status(sensorhub->ec->ec_dev, sensorhub->msg);
+	mutex_unlock(&sensorhub->cmd_lock);
+
+	/* We expect to receive a payload of 4 bytes, ignore. */
+	if (ret > 0)
+		ret = 0;
+
+	return ret;
+}
+
+static int cros_ec_sensor_ring_median_cmp(const void *pv1, const void *pv2)
+{
+	s64 v1 = *(s64 *)pv1;
+	s64 v2 = *(s64 *)pv2;
+
+	if (v1 > v2)
+		return 1;
+	else if (v1 < v2)
+		return -1;
+	else
+		return 0;
+}
+
+/*
+ * cros_ec_sensor_ring_median: Gets median of an array of numbers
+ *
+ * For now it's implemented using an inefficient > O(n) sort then return
+ * the middle element. A more optimal method would be something like
+ * quickselect, but given that n = 64 we can probably live with it in the
+ * name of clarity.
+ *
+ * Warning: the input array gets modified (sorted)!
+ */
+static s64 cros_ec_sensor_ring_median(s64 *array, size_t length)
+{
+	sort(array, length, sizeof(s64), cros_ec_sensor_ring_median_cmp, NULL);
+	return array[length / 2];
+}
+
+/*
+ * IRQ Timestamp Filtering
+ *
+ * Lower down in cros_ec_sensor_ring_process_event(), for each sensor event
+ * we have to calculate it's timestamp in the AP timebase. There are 3 time
+ * points:
+ *   a - EC timebase, sensor event
+ *   b - EC timebase, IRQ
+ *   c - AP timebase, IRQ
+ *   a' - what we want: sensor even in AP timebase
+ *
+ * While a and b are recorded at accurate times (due to the EC real time
+ * nature); c is pretty untrustworthy, even though it's recorded the
+ * first thing in ec_irq_handler(). There is a very good change we'll get
+ * added lantency due to:
+ *   other irqs
+ *   ddrfreq
+ *   cpuidle
+ *
+ * Normally a' = c - b + a, but if we do that naive math any jitter in c
+ * will get coupled in a', which we don't want. We want a function
+ * a' = cros_ec_sensor_ring_ts_filter(a) which will filter out outliers in c.
+ *
+ * Think of a graph of AP time(b) on the y axis vs EC time(c) on the x axis.
+ * The slope of the line won't be exactly 1, there will be some clock drift
+ * between the 2 chips for various reasons (mechanical stress, temperature,
+ * voltage). We need to extrapolate values for a future x, without trusting
+ * recent y values too much.
+ *
+ * We use a median filter for the slope, then another median filter for the
+ * y-intercept to calculate this function:
+ *   dx[n] = x[n-1] - x[n]
+ *   dy[n] = x[n-1] - x[n]
+ *   m[n] = dy[n] / dx[n]
+ *   median_m = median(m[n-k:n])
+ *   error[i] = y[n-i] - median_m * x[n-i]
+ *   median_error = median(error[:k])
+ *   predicted_y = median_m * x + median_error
+ *
+ * Implementation differences from above:
+ * - Redefined y to be actually c - b, this gives us a lot more precision
+ * to do the math. (c-b)/b variations are more obvious than c/b variations.
+ * - Since we don't have floating point, any operations involving slope are
+ * done using fixed point math (*M_PRECISION)
+ * - Since x and y grow with time, we keep zeroing the graph (relative to
+ * the last sample), this way math involving *x[n-i] will not overflow
+ * - EC timestamps are kept in us, it improves the slope calculation precision
+ */
+
+/**
+ * cros_ec_sensor_ring_ts_filter_update() - Update filter history.
+ *
+ * @state: Filter information.
+ * @b: IRQ timestamp, EC timebase (us)
+ * @c: IRQ timestamp, AP timebase (ns)
+ *
+ * Given a new IRQ timestamp pair (EC and AP timebases), add it to the filter
+ * history.
+ */
+static void
+cros_ec_sensor_ring_ts_filter_update(struct cros_ec_sensors_ts_filter_state
+				     *state,
+				     s64 b, s64 c)
+{
+	s64 x, y;
+	s64 dx, dy;
+	s64 m; /* stored as *M_PRECISION */
+	s64 *m_history_copy = state->temp_buf;
+	s64 *error = state->temp_buf;
+	int i;
+
+	/* we trust b the most, that'll be our independent variable */
+	x = b;
+	/* y is the offset between AP and EC times, in ns */
+	y = c - b * 1000;
+
+	dx = (state->x_history[0] + state->x_offset) - x;
+	if (dx == 0)
+		return; /* we already have this irq in the history */
+	dy = (state->y_history[0] + state->y_offset) - y;
+	m = div64_s64(dy * M_PRECISION, dx);
+
+	/* Empty filter if we haven't seen any action in a while. */
+	if (-dx > TS_HISTORY_BORED_US)
+		state->history_len = 0;
+
+	/* Move everything over, also update offset to all absolute coords .*/
+	for (i = state->history_len - 1; i >= 1; i--) {
+		state->x_history[i] = state->x_history[i - 1] + dx;
+		state->y_history[i] = state->y_history[i - 1] + dy;
+
+		state->m_history[i] = state->m_history[i - 1];
+		/*
+		 * Also use the same loop to copy m_history for future
+		 * median extraction.
+		 */
+		m_history_copy[i] = state->m_history[i - 1];
+	}
+
+	/* Store the x and y, but remember offset is actually last sample. */
+	state->x_offset = x;
+	state->y_offset = y;
+	state->x_history[0] = 0;
+	state->y_history[0] = 0;
+
+	state->m_history[0] = m;
+	m_history_copy[0] = m;
+
+	if (state->history_len < CROS_EC_SENSORHUB_TS_HISTORY_SIZE)
+		state->history_len++;
+
+	/* Precalculate things for the filter. */
+	if (state->history_len > TS_HISTORY_THRESHOLD) {
+		state->median_m =
+		    cros_ec_sensor_ring_median(m_history_copy,
+					       state->history_len - 1);
+
+		/*
+		 * Calculate y-intercepts as if m_median is the slope and
+		 * points in the history are on the line. median_error will
+		 * still be in the offset coordinate system.
+		 */
+		for (i = 0; i < state->history_len; i++)
+			error[i] = state->y_history[i] -
+				div_s64(state->median_m * state->x_history[i],
+					M_PRECISION);
+		state->median_error =
+			cros_ec_sensor_ring_median(error, state->history_len);
+	} else {
+		state->median_m = 0;
+		state->median_error = 0;
+	}
+}
+
+/**
+ * cros_ec_sensor_ring_ts_filter() - Translate EC timebase timestamp to AP
+ *                                   timebase
+ *
+ * @state: filter information.
+ * @x: any ec timestamp (us):
+ *
+ * cros_ec_sensor_ring_ts_filter(a) => a' event timestamp, AP timebase
+ * cros_ec_sensor_ring_ts_filter(b) => calculated timestamp when the EC IRQ
+ *                           should have happened on the AP, with low jitter
+ *
+ * Note: The filter will only activate once state->history_len goes
+ * over TS_HISTORY_THRESHOLD. Otherwise it'll just do the naive c - b + a
+ * transform.
+ *
+ * How to derive the formula, starting from:
+ *   f(x) = median_m * x + median_error
+ * That's the calculated AP - EC offset (at the x point in time)
+ * Undo the coordinate system transform:
+ *   f(x) = median_m * (x - x_offset) + median_error + y_offset
+ * Remember to undo the "y = c - b * 1000" modification:
+ *   f(x) = median_m * (x - x_offset) + median_error + y_offset + x * 1000
+ *
+ * Return: timestamp in AP timebase (ns)
+ */
+static s64
+cros_ec_sensor_ring_ts_filter(struct cros_ec_sensors_ts_filter_state *state,
+			      s64 x)
+{
+	return div_s64(state->median_m * (x - state->x_offset), M_PRECISION)
+	       + state->median_error + state->y_offset + x * 1000;
+}
+
+/*
+ * Since a and b were originally 32 bit values from the EC,
+ * they overflow relatively often, casting is not enough, so we need to
+ * add an offset.
+ */
+static void
+cros_ec_sensor_ring_fix_overflow(s64 *ts,
+				 const s64 overflow_period,
+				 struct cros_ec_sensors_ec_overflow_state
+				 *state)
+{
+	s64 adjust;
+
+	*ts += state->offset;
+	if (abs(state->last - *ts) > (overflow_period / 2)) {
+		adjust = state->last > *ts ? overflow_period : -overflow_period;
+		state->offset += adjust;
+		*ts += adjust;
+	}
+	state->last = *ts;
+}
+
+static void
+cros_ec_sensor_ring_check_for_past_timestamp(struct cros_ec_sensorhub
+					     *sensorhub,
+					     struct cros_ec_sensors_ring_sample
+					     *sample)
+{
+	const u8 sensor_id = sample->sensor_id;
+
+	/* If this event is earlier than one we saw before... */
+	if (sensorhub->batch_state[sensor_id].newest_sensor_event >
+	    sample->timestamp)
+		/* mark it for spreading. */
+		sample->timestamp =
+			sensorhub->batch_state[sensor_id].last_ts;
+	else
+		sensorhub->batch_state[sensor_id].newest_sensor_event =
+			sample->timestamp;
+}
+
+/**
+ * cros_ec_sensor_ring_process_event() - Process one EC FIFO event
+ *
+ * @sensorhub: Sensor Hub object.
+ * @fifo_info: FIFO information from the EC (includes b point, EC timebase).
+ * @fifo_timestamp: EC IRQ, kernel timebase (aka c).
+ * @current_timestamp: calculated event timestamp, kernel timebase (aka a').
+ * @in: incoming FIFO event from EC (includes a point, EC timebase).
+ * @out: outgoing event to user space (includes a').
+ *
+ * Process one EC event, add it in the ring if necessary.
+ *
+ * Return: true if out event has been populated.
+ */
+static bool
+cros_ec_sensor_ring_process_event(struct cros_ec_sensorhub *sensorhub,
+				const struct ec_response_motion_sense_fifo_info
+				*fifo_info,
+				const ktime_t fifo_timestamp,
+				ktime_t *current_timestamp,
+				struct ec_response_motion_sensor_data *in,
+				struct cros_ec_sensors_ring_sample *out)
+{
+	const s64 now = cros_ec_get_time_ns();
+	int axis, async_flags;
+
+	/* Do not populate the filter based on asynchronous events. */
+	async_flags = in->flags &
+		(MOTIONSENSE_SENSOR_FLAG_ODR | MOTIONSENSE_SENSOR_FLAG_FLUSH);
+
+	if (in->flags & MOTIONSENSE_SENSOR_FLAG_TIMESTAMP && !async_flags) {
+		s64 a = in->timestamp;
+		s64 b = fifo_info->timestamp;
+		s64 c = fifo_timestamp;
+
+		cros_ec_sensor_ring_fix_overflow(&a, 1LL << 32,
+					  &sensorhub->overflow_a);
+		cros_ec_sensor_ring_fix_overflow(&b, 1LL << 32,
+					  &sensorhub->overflow_b);
+
+		if (sensorhub->tight_timestamps) {
+			cros_ec_sensor_ring_ts_filter_update(
+					&sensorhub->filter, b, c);
+			*current_timestamp = cros_ec_sensor_ring_ts_filter(
+					&sensorhub->filter, a);
+		} else {
+			s64 new_timestamp;
+
+			/*
+			 * Disable filtering since we might add more jitter
+			 * if b is in a random point in time.
+			 */
+			new_timestamp = fifo_timestamp -
+					fifo_info->timestamp  * 1000 +
+					in->timestamp * 1000;
+			/*
+			 * The timestamp can be stale if we had to use the fifo
+			 * info timestamp.
+			 */
+			if (new_timestamp - *current_timestamp > 0)
+				*current_timestamp = new_timestamp;
+		}
+	}
+
+	if (in->flags & MOTIONSENSE_SENSOR_FLAG_ODR) {
+		if (sensorhub->tight_timestamps) {
+			sensorhub->batch_state[in->sensor_num].last_len = 0;
+			sensorhub->batch_state[in->sensor_num].penul_len = 0;
+		}
+		/*
+		 * ODR change is only useful for the sensor_ring, it does not
+		 * convey information to clients.
+		 */
+		return false;
+	}
+
+	if (in->flags & MOTIONSENSE_SENSOR_FLAG_FLUSH) {
+		out->sensor_id = in->sensor_num;
+		out->timestamp = *current_timestamp;
+		out->flag = in->flags;
+		if (sensorhub->tight_timestamps)
+			sensorhub->batch_state[out->sensor_id].last_len = 0;
+		/*
+		 * No other payload information provided with
+		 * flush ack.
+		 */
+		return true;
+	}
+
+	if (in->flags & MOTIONSENSE_SENSOR_FLAG_TIMESTAMP)
+		/* If we just have a timestamp, skip this entry. */
+		return false;
+
+	/* Regular sample */
+	out->sensor_id = in->sensor_num;
+	if (*current_timestamp - now > 0) {
+		/*
+		 * This fix is needed to overcome the timestamp filter putting
+		 * events in the future.
+		 */
+		sensorhub->future_timestamp_total_ns +=
+			*current_timestamp - now;
+		if (++sensorhub->future_timestamp_count ==
+				FUTURE_TS_ANALYTICS_COUNT_MAX) {
+			s64 avg = div_s64(sensorhub->future_timestamp_total_ns,
+					sensorhub->future_timestamp_count);
+			dev_warn_ratelimited(sensorhub->dev,
+					     "100 timestamps in the future, %lldns shaved on average\n",
+					     avg);
+			sensorhub->future_timestamp_count = 0;
+			sensorhub->future_timestamp_total_ns = 0;
+		}
+		out->timestamp = now;
+	} else {
+		out->timestamp = *current_timestamp;
+	}
+
+	out->flag = in->flags;
+	for (axis = 0; axis < 3; axis++)
+		out->vector[axis] = in->data[axis];
+
+	if (sensorhub->tight_timestamps)
+		cros_ec_sensor_ring_check_for_past_timestamp(sensorhub, out);
+	return true;
+}
+
+/*
+ * cros_ec_sensor_ring_spread_add: Calculate proper timestamps then add to
+ *                                 ringbuffer.
+ *
+ * This is the new spreading code, assumes every sample's timestamp
+ * preceeds the sample. Run if tight_timestamps == true.
+ *
+ * Sometimes the EC receives only one interrupt (hence timestamp) for
+ * a batch of samples. Only the first sample will have the correct
+ * timestamp. So we must interpolate the other samples.
+ * We use the previous batch timestamp and our current batch timestamp
+ * as a way to calculate period, then spread the samples evenly.
+ *
+ * s0 int, 0ms
+ * s1 int, 10ms
+ * s2 int, 20ms
+ * 30ms point goes by, no interrupt, previous one is still asserted
+ * downloading s2 and s3
+ * s3 sample, 20ms (incorrect timestamp)
+ * s4 int, 40ms
+ *
+ * The batches are [(s0), (s1), (s2, s3), (s4)]. Since the 3rd batch
+ * has 2 samples in them, we adjust the timestamp of s3.
+ * s2 - s1 = 10ms, so s3 must be s2 + 10ms => 20ms. If s1 would have
+ * been part of a bigger batch things would have gotten a little
+ * more complicated.
+ *
+ * Note: we also assume another sensor sample doesn't break up a batch
+ * in 2 or more partitions. Example, there can't ever be a sync sensor
+ * in between S2 and S3. This simplifies the following code.
+ */
+static void
+cros_ec_sensor_ring_spread_add(struct cros_ec_sensorhub *sensorhub,
+			       unsigned long sensor_mask,
+			       struct cros_ec_sensors_ring_sample *last_out)
+{
+	struct cros_ec_sensors_ring_sample *batch_start, *next_batch_start;
+	int id;
+
+	for_each_set_bit(id, &sensor_mask, sensorhub->sensor_num) {
+		for (batch_start = sensorhub->ring; batch_start < last_out;
+		     batch_start = next_batch_start) {
+			/*
+			 * For each batch (where all samples have the same
+			 * timestamp).
+			 */
+			int batch_len, sample_idx;
+			struct cros_ec_sensors_ring_sample *batch_end =
+				batch_start;
+			struct cros_ec_sensors_ring_sample *s;
+			s64 batch_timestamp = batch_start->timestamp;
+			s64 sample_period;
+
+			/*
+			 * Skip over batches that start with the sensor types
+			 * we're not looking at right now.
+			 */
+			if (batch_start->sensor_id != id) {
+				next_batch_start = batch_start + 1;
+				continue;
+			}
+
+			/*
+			 * Do not start a batch
+			 * from a flush, as it happens asynchronously to the
+			 * regular flow of events.
+			 */
+			if (batch_start->flag & MOTIONSENSE_SENSOR_FLAG_FLUSH) {
+				cros_sensorhub_send_sample(sensorhub,
+							   batch_start);
+				next_batch_start = batch_start + 1;
+				continue;
+			}
+
+			if (batch_start->timestamp <=
+			    sensorhub->batch_state[id].last_ts) {
+				batch_timestamp =
+					sensorhub->batch_state[id].last_ts;
+				batch_len = sensorhub->batch_state[id].last_len;
+
+				sample_idx = batch_len;
+
+				sensorhub->batch_state[id].last_ts =
+				  sensorhub->batch_state[id].penul_ts;
+				sensorhub->batch_state[id].last_len =
+				  sensorhub->batch_state[id].penul_len;
+			} else {
+				/*
+				 * Push first sample in the batch to the,
+				 * kifo, it's guaranteed to be correct, the
+				 * rest will follow later on.
+				 */
+				sample_idx = 1;
+				batch_len = 1;
+				cros_sensorhub_send_sample(sensorhub,
+							   batch_start);
+				batch_start++;
+			}
+
+			/* Find all samples have the same timestamp. */
+			for (s = batch_start; s < last_out; s++) {
+				if (s->sensor_id != id)
+					/*
+					 * Skip over other sensor types that
+					 * are interleaved, don't count them.
+					 */
+					continue;
+				if (s->timestamp != batch_timestamp)
+					/* we discovered the next batch */
+					break;
+				if (s->flag & MOTIONSENSE_SENSOR_FLAG_FLUSH)
+					/* break on flush packets */
+					break;
+				batch_end = s;
+				batch_len++;
+			}
+
+			if (batch_len == 1)
+				goto done_with_this_batch;
+
+			/* Can we calculate period? */
+			if (sensorhub->batch_state[id].last_len == 0) {
+				dev_warn(sensorhub->dev, "Sensor %d: lost %d samples when spreading\n",
+					 id, batch_len - 1);
+				goto done_with_this_batch;
+				/*
+				 * Note: we're dropping the rest of the samples
+				 * in this batch since we have no idea where
+				 * they're supposed to go without a period
+				 * calculation.
+				 */
+			}
+
+			sample_period = div_s64(batch_timestamp -
+				sensorhub->batch_state[id].last_ts,
+				sensorhub->batch_state[id].last_len);
+			dev_dbg(sensorhub->dev,
+				"Adjusting %d samples, sensor %d last_batch @%lld (%d samples) batch_timestamp=%lld => period=%lld\n",
+				batch_len, id,
+				sensorhub->batch_state[id].last_ts,
+				sensorhub->batch_state[id].last_len,
+				batch_timestamp,
+				sample_period);
+
+			/*
+			 * Adjust timestamps of the samples then push them to
+			 * kfifo.
+			 */
+			for (s = batch_start; s <= batch_end; s++) {
+				if (s->sensor_id != id)
+					/*
+					 * Skip over other sensor types that
+					 * are interleaved, don't change them.
+					 */
+					continue;
+
+				s->timestamp = batch_timestamp +
+					sample_period * sample_idx;
+				sample_idx++;
+
+				cros_sensorhub_send_sample(sensorhub, s);
+			}
+
+done_with_this_batch:
+			sensorhub->batch_state[id].penul_ts =
+				sensorhub->batch_state[id].last_ts;
+			sensorhub->batch_state[id].penul_len =
+				sensorhub->batch_state[id].last_len;
+
+			sensorhub->batch_state[id].last_ts =
+				batch_timestamp;
+			sensorhub->batch_state[id].last_len = batch_len;
+
+			next_batch_start = batch_end + 1;
+		}
+	}
+}
+
+/*
+ * cros_ec_sensor_ring_spread_add_legacy: Calculate proper timestamps then
+ * add to ringbuffer (legacy).
+ *
+ * Note: This assumes we're running old firmware, where every sample's timestamp
+ * is after the sample. Run if tight_timestamps == false.
+ *
+ * If there is a sample with a proper timestamp
+ *
+ *                        timestamp | count
+ *                        -----------------
+ * older_unprocess_out --> TS1      | 1
+ *                         TS1      | 2
+ *                out -->  TS1      | 3
+ *           next_out -->  TS2      |
+ *
+ * We spread time for the samples [older_unprocess_out .. out]
+ * between TS1 and TS2: [TS1+1/4, TS1+2/4, TS1+3/4, TS2].
+ *
+ * If we reach the end of the samples, we compare with the
+ * current timestamp:
+ *
+ * older_unprocess_out --> TS1      | 1
+ *                         TS1      | 2
+ *                 out --> TS1      | 3
+ *
+ * We know have [TS1+1/3, TS1+2/3, current timestamp]
+ */
+static void
+cros_ec_sensor_ring_spread_add_legacy(struct cros_ec_sensorhub *sensorhub,
+				      unsigned long sensor_mask,
+				      s64 current_timestamp,
+				      struct cros_ec_sensors_ring_sample
+				      *last_out)
+{
+	struct cros_ec_sensors_ring_sample *out;
+	int i;
+
+	for_each_set_bit(i, &sensor_mask, sensorhub->sensor_num) {
+		s64 older_timestamp;
+		s64 timestamp;
+		struct cros_ec_sensors_ring_sample *older_unprocess_out =
+			sensorhub->ring;
+		struct cros_ec_sensors_ring_sample *next_out;
+		int count = 1;
+
+		for (out = sensorhub->ring; out < last_out; out = next_out) {
+			s64 time_period;
+
+			next_out = out + 1;
+			if (out->sensor_id != i)
+				continue;
+
+			/* Timestamp to start with */
+			older_timestamp = out->timestamp;
+
+			/* Find next sample. */
+			while (next_out < last_out && next_out->sensor_id != i)
+				next_out++;
+
+			if (next_out >= last_out) {
+				timestamp = current_timestamp;
+			} else {
+				timestamp = next_out->timestamp;
+				if (timestamp == older_timestamp) {
+					count++;
+					continue;
+				}
+			}
+
+			/*
+			 * The next sample has a new timestamp, spread the
+			 * unprocessed samples.
+			 */
+			if (next_out < last_out)
+				count++;
+			time_period = div_s64(timestamp - older_timestamp,
+					      count);
+
+			for (; older_unprocess_out <= out;
+					older_unprocess_out++) {
+				if (older_unprocess_out->sensor_id != i)
+					continue;
+				older_timestamp += time_period;
+				older_unprocess_out->timestamp =
+					older_timestamp;
+			}
+			count = 1;
+			/* The next_out sample has a valid timestamp, skip. */
+			next_out++;
+			older_unprocess_out = next_out;
+		}
+	}
+
+	/* Push the event into the kfifo */
+	for (out = sensorhub->ring; out < last_out; out++)
+		cros_sensorhub_send_sample(sensorhub, out);
+}
+
+/**
+ * cros_ec_sensorhub_ring_handler() - The trigger handler function
+ *
+ * @sensorhub: Sensor Hub object.
+ *
+ * Called by the notifier, process the EC sensor FIFO queue.
+ */
+static void cros_ec_sensorhub_ring_handler(struct cros_ec_sensorhub *sensorhub)
+{
+	struct ec_response_motion_sense_fifo_info *fifo_info =
+		sensorhub->fifo_info;
+	struct cros_ec_dev *ec = sensorhub->ec;
+	ktime_t fifo_timestamp, current_timestamp;
+	int i, j, number_data, ret;
+	unsigned long sensor_mask = 0;
+	struct ec_response_motion_sensor_data *in;
+	struct cros_ec_sensors_ring_sample *out, *last_out;
+
+	mutex_lock(&sensorhub->cmd_lock);
+
+	/* Get FIFO information if there are lost vectors. */
+	if (fifo_info->total_lost) {
+		int fifo_info_length =
+			sizeof(struct ec_response_motion_sense_fifo_info) +
+			sizeof(u16) * sensorhub->sensor_num;
+
+		/* Need to retrieve the number of lost vectors per sensor */
+		sensorhub->params->cmd = MOTIONSENSE_CMD_FIFO_INFO;
+		sensorhub->msg->outsize = 1;
+		sensorhub->msg->insize = fifo_info_length;
+
+		if (cros_ec_cmd_xfer_status(ec->ec_dev, sensorhub->msg) < 0)
+			goto error;
+
+		memcpy(fifo_info, &sensorhub->resp->fifo_info,
+		       fifo_info_length);
+
+		/*
+		 * Update collection time, will not be as precise as the
+		 * non-error case.
+		 */
+		fifo_timestamp = cros_ec_get_time_ns();
+	} else {
+		fifo_timestamp = sensorhub->fifo_timestamp[
+			CROS_EC_SENSOR_NEW_TS];
+	}
+
+	if (fifo_info->count > sensorhub->fifo_size ||
+	    fifo_info->size != sensorhub->fifo_size) {
+		dev_warn(sensorhub->dev,
+			 "Mismatch EC data: count %d, size %d - expected %d\n",
+			 fifo_info->count, fifo_info->size,
+			 sensorhub->fifo_size);
+		goto error;
+	}
+
+	/* Copy elements in the main fifo */
+	current_timestamp = sensorhub->fifo_timestamp[CROS_EC_SENSOR_LAST_TS];
+	out = sensorhub->ring;
+	for (i = 0; i < fifo_info->count; i += number_data) {
+		sensorhub->params->cmd = MOTIONSENSE_CMD_FIFO_READ;
+		sensorhub->params->fifo_read.max_data_vector =
+			fifo_info->count - i;
+		sensorhub->msg->outsize =
+			sizeof(struct ec_params_motion_sense);
+		sensorhub->msg->insize =
+			sizeof(sensorhub->resp->fifo_read) +
+			sensorhub->params->fifo_read.max_data_vector *
+			  sizeof(struct ec_response_motion_sensor_data);
+		ret = cros_ec_cmd_xfer_status(ec->ec_dev, sensorhub->msg);
+		if (ret < 0) {
+			dev_warn(sensorhub->dev, "Fifo error: %d\n", ret);
+			break;
+		}
+		number_data = sensorhub->resp->fifo_read.number_data;
+		if (number_data == 0) {
+			dev_dbg(sensorhub->dev, "Unexpected empty FIFO\n");
+			break;
+		}
+		if (number_data > fifo_info->count - i) {
+			dev_warn(sensorhub->dev,
+				 "Invalid EC data: too many entry received: %d, expected %d\n",
+				 number_data, fifo_info->count - i);
+			break;
+		}
+		if (out + number_data >
+		    sensorhub->ring + fifo_info->count) {
+			dev_warn(sensorhub->dev,
+				 "Too many samples: %d (%zd data) to %d entries for expected %d entries\n",
+				 i, out - sensorhub->ring, i + number_data,
+				 fifo_info->count);
+			break;
+		}
+
+		for (in = sensorhub->resp->fifo_read.data, j = 0;
+		     j < number_data; j++, in++) {
+			if (cros_ec_sensor_ring_process_event(
+						sensorhub, fifo_info,
+						fifo_timestamp,
+						&current_timestamp,
+						in, out)) {
+				sensor_mask |= BIT(in->sensor_num);
+				out++;
+			}
+		}
+	}
+	mutex_unlock(&sensorhub->cmd_lock);
+	last_out = out;
+
+	if (out == sensorhub->ring)
+		/* Unexpected empty FIFO. */
+		goto ring_handler_end;
+
+	/*
+	 * Check if current_timestamp is ahead of the last sample. Normally,
+	 * the EC appends a timestamp after the last sample, but if the AP
+	 * is slow to respond to the IRQ, the EC may have added new samples.
+	 * Use the FIFO info timestamp as last timestamp then.
+	 */
+	if (!sensorhub->tight_timestamps &&
+	    (last_out - 1)->timestamp == current_timestamp)
+		current_timestamp = fifo_timestamp;
+
+	/* Warn on lost samples. */
+	if (fifo_info->total_lost)
+		for (i = 0; i < sensorhub->sensor_num; i++) {
+			if (fifo_info->lost[i]) {
+				dev_warn_ratelimited(sensorhub->dev,
+						     "Sensor %d: lost: %d out of %d\n",
+						     i, fifo_info->lost[i],
+						     fifo_info->total_lost);
+				if (sensorhub->tight_timestamps)
+					sensorhub->batch_state[i].last_len = 0;
+			}
+		}
+
+	/*
+	 * Spread samples in case of batching, then add them to the
+	 * ringbuffer.
+	 */
+	if (sensorhub->tight_timestamps)
+		cros_ec_sensor_ring_spread_add(sensorhub, sensor_mask,
+					       last_out);
+	else
+		cros_ec_sensor_ring_spread_add_legacy(sensorhub, sensor_mask,
+						      current_timestamp,
+						      last_out);
+
+ring_handler_end:
+	sensorhub->fifo_timestamp[CROS_EC_SENSOR_LAST_TS] = current_timestamp;
+	return;
+
+error:
+	mutex_unlock(&sensorhub->cmd_lock);
+}
+
+static int cros_ec_sensorhub_event(struct notifier_block *nb,
+				   unsigned long queued_during_suspend,
+				   void *_notify)
+{
+	struct cros_ec_sensorhub *sensorhub;
+	struct cros_ec_device *ec_dev;
+
+	sensorhub = container_of(nb, struct cros_ec_sensorhub, notifier);
+	ec_dev = sensorhub->ec->ec_dev;
+
+	if (ec_dev->event_data.event_type != EC_MKBP_EVENT_SENSOR_FIFO)
+		return NOTIFY_DONE;
+
+	if (ec_dev->event_size != sizeof(ec_dev->event_data.data.sensor_fifo)) {
+		dev_warn(ec_dev->dev, "Invalid fifo info size\n");
+		return NOTIFY_DONE;
+	}
+
+	if (queued_during_suspend)
+		return NOTIFY_OK;
+
+	memcpy(sensorhub->fifo_info, &ec_dev->event_data.data.sensor_fifo.info,
+	       sizeof(*sensorhub->fifo_info));
+	sensorhub->fifo_timestamp[CROS_EC_SENSOR_NEW_TS] =
+		ec_dev->last_event_time;
+	cros_ec_sensorhub_ring_handler(sensorhub);
+
+	return NOTIFY_OK;
+}
+
+/**
+ * cros_ec_sensorhub_ring_add() - Add the FIFO functionality if the EC
+ *				  supports it.
+ *
+ * @sensorhub : Sensor Hub object.
+ *
+ * Return: 0 on success.
+ */
+int cros_ec_sensorhub_ring_add(struct cros_ec_sensorhub *sensorhub)
+{
+	struct cros_ec_dev *ec = sensorhub->ec;
+	int ret;
+	int fifo_info_length =
+		sizeof(struct ec_response_motion_sense_fifo_info) +
+		sizeof(u16) * sensorhub->sensor_num;
+
+	/* Allocate the array for lost events. */
+	sensorhub->fifo_info = devm_kzalloc(sensorhub->dev, fifo_info_length,
+					    GFP_KERNEL);
+	if (!sensorhub->fifo_info)
+		return -ENOMEM;
+
+	/* Retrieve FIFO information */
+	sensorhub->msg->version = 2;
+	sensorhub->params->cmd = MOTIONSENSE_CMD_FIFO_INFO;
+	sensorhub->msg->outsize = 1;
+	sensorhub->msg->insize = fifo_info_length;
+
+	ret = cros_ec_cmd_xfer_status(ec->ec_dev, sensorhub->msg);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Allocate the full fifo. We need to copy the whole FIFO to set
+	 * timestamps properly.
+	 */
+	sensorhub->fifo_size = sensorhub->resp->fifo_info.size;
+	sensorhub->ring = devm_kcalloc(sensorhub->dev, sensorhub->fifo_size,
+				       sizeof(*sensorhub->ring), GFP_KERNEL);
+	if (!sensorhub->ring)
+		return -ENOMEM;
+
+	/*
+	 * Allocate the callback area based on the number of sensors.
+	 */
+	sensorhub->push_data = devm_kcalloc(
+			sensorhub->dev, sensorhub->sensor_num,
+			sizeof(*sensorhub->push_data),
+			GFP_KERNEL);
+	if (!sensorhub->push_data)
+		return -ENOMEM;
+
+	sensorhub->fifo_timestamp[CROS_EC_SENSOR_LAST_TS] =
+		cros_ec_get_time_ns();
+
+	sensorhub->tight_timestamps = cros_ec_check_features(
+			ec, EC_FEATURE_MOTION_SENSE_TIGHT_TIMESTAMPS);
+
+	if (sensorhub->tight_timestamps) {
+		sensorhub->batch_state = devm_kcalloc(sensorhub->dev,
+				sensorhub->sensor_num,
+				sizeof(*sensorhub->batch_state),
+				GFP_KERNEL);
+		if (!sensorhub->batch_state)
+			return -ENOMEM;
+	}
+
+	/* Register the notifier that will act as a top half interrupt. */
+	sensorhub->notifier.notifier_call = cros_ec_sensorhub_event;
+	ret = blocking_notifier_chain_register(&ec->ec_dev->event_notifier,
+					       &sensorhub->notifier);
+	if (ret < 0)
+		return ret;
+
+	/* Start collection samples. */
+	return cros_ec_sensorhub_ring_fifo_enable(sensorhub, true);
+}
+
+void cros_ec_sensorhub_ring_remove(void *arg)
+{
+	struct cros_ec_sensorhub *sensorhub = arg;
+	struct cros_ec_device *ec_dev = sensorhub->ec->ec_dev;
+
+	/* Disable the ring, prevent EC interrupt to the AP for nothing. */
+	cros_ec_sensorhub_ring_fifo_enable(sensorhub, false);
+	blocking_notifier_chain_unregister(&ec_dev->event_notifier,
+					   &sensorhub->notifier);
+}
diff --git a/drivers/platform/chrome/cros_ec_spi.c b/drivers/platform/chrome/cros_ec_spi.c
index 46786d2..debea5c 100644
--- a/drivers/platform/chrome/cros_ec_spi.c
+++ b/drivers/platform/chrome/cros_ec_spi.c
@@ -127,7 +127,8 @@ static int terminate_request(struct cros_ec_device *ec_dev)
 	 */
 	spi_message_init(&msg);
 	memset(&trans, 0, sizeof(trans));
-	trans.delay_usecs = ec_spi->end_of_msg_delay;
+	trans.delay.value = ec_spi->end_of_msg_delay;
+	trans.delay.unit = SPI_DELAY_UNIT_USECS;
 	spi_message_add_tail(&trans, &msg);
 
 	ret = spi_sync_locked(ec_spi->spi, &msg);
@@ -416,7 +417,8 @@ static int do_cros_ec_pkt_xfer_spi(struct cros_ec_device *ec_dev,
 	spi_message_init(&msg);
 	if (ec_spi->start_of_msg_delay) {
 		memset(&trans_delay, 0, sizeof(trans_delay));
-		trans_delay.delay_usecs = ec_spi->start_of_msg_delay;
+		trans_delay.delay.value = ec_spi->start_of_msg_delay;
+		trans_delay.delay.unit = SPI_DELAY_UNIT_USECS;
 		spi_message_add_tail(&trans_delay, &msg);
 	}
 
diff --git a/drivers/platform/chrome/cros_ec_sysfs.c b/drivers/platform/chrome/cros_ec_sysfs.c
index 07dac97..d45ea5d 100644
--- a/drivers/platform/chrome/cros_ec_sysfs.c
+++ b/drivers/platform/chrome/cros_ec_sysfs.c
@@ -149,14 +149,14 @@ static ssize_t version_show(struct device *dev,
 	/* Get build info. */
 	msg->command = EC_CMD_GET_BUILD_INFO + ec->cmd_offset;
 	msg->insize = EC_HOST_PARAM_SIZE;
-	ret = cros_ec_cmd_xfer(ec->ec_dev, msg);
-	if (ret < 0)
-		count += scnprintf(buf + count, PAGE_SIZE - count,
-				   "Build info:    XFER ERROR %d\n", ret);
-	else if (msg->result != EC_RES_SUCCESS)
+	ret = cros_ec_cmd_xfer_status(ec->ec_dev, msg);
+	if (ret == -EPROTO) {
 		count += scnprintf(buf + count, PAGE_SIZE - count,
 				   "Build info:    EC error %d\n", msg->result);
-	else {
+	} else if (ret < 0) {
+		count += scnprintf(buf + count, PAGE_SIZE - count,
+				   "Build info:    XFER ERROR %d\n", ret);
+	} else {
 		msg->data[EC_HOST_PARAM_SIZE - 1] = '\0';
 		count += scnprintf(buf + count, PAGE_SIZE - count,
 				   "Build info:    %s\n", msg->data);
@@ -165,14 +165,14 @@ static ssize_t version_show(struct device *dev,
 	/* Get chip info. */
 	msg->command = EC_CMD_GET_CHIP_INFO + ec->cmd_offset;
 	msg->insize = sizeof(*r_chip);
-	ret = cros_ec_cmd_xfer(ec->ec_dev, msg);
-	if (ret < 0)
-		count += scnprintf(buf + count, PAGE_SIZE - count,
-				   "Chip info:     XFER ERROR %d\n", ret);
-	else if (msg->result != EC_RES_SUCCESS)
+	ret = cros_ec_cmd_xfer_status(ec->ec_dev, msg);
+	if (ret == -EPROTO) {
 		count += scnprintf(buf + count, PAGE_SIZE - count,
 				   "Chip info:     EC error %d\n", msg->result);
-	else {
+	} else if (ret < 0) {
+		count += scnprintf(buf + count, PAGE_SIZE - count,
+				   "Chip info:     XFER ERROR %d\n", ret);
+	} else {
 		r_chip = (struct ec_response_get_chip_info *)msg->data;
 
 		r_chip->vendor[sizeof(r_chip->vendor) - 1] = '\0';
@@ -189,14 +189,14 @@ static ssize_t version_show(struct device *dev,
 	/* Get board version */
 	msg->command = EC_CMD_GET_BOARD_VERSION + ec->cmd_offset;
 	msg->insize = sizeof(*r_board);
-	ret = cros_ec_cmd_xfer(ec->ec_dev, msg);
-	if (ret < 0)
-		count += scnprintf(buf + count, PAGE_SIZE - count,
-				   "Board version: XFER ERROR %d\n", ret);
-	else if (msg->result != EC_RES_SUCCESS)
+	ret = cros_ec_cmd_xfer_status(ec->ec_dev, msg);
+	if (ret == -EPROTO) {
 		count += scnprintf(buf + count, PAGE_SIZE - count,
 				   "Board version: EC error %d\n", msg->result);
-	else {
+	} else if (ret < 0) {
+		count += scnprintf(buf + count, PAGE_SIZE - count,
+				   "Board version: XFER ERROR %d\n", ret);
+	} else {
 		r_board = (struct ec_response_board_version *)msg->data;
 
 		count += scnprintf(buf + count, PAGE_SIZE - count,
diff --git a/drivers/platform/chrome/cros_ec_typec.c b/drivers/platform/chrome/cros_ec_typec.c
new file mode 100644
index 0000000..874269c
--- /dev/null
+++ b/drivers/platform/chrome/cros_ec_typec.c
@@ -0,0 +1,357 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2020 Google LLC
+ *
+ * This driver provides the ability to view and manage Type C ports through the
+ * Chrome OS EC.
+ */
+
+#include <linux/acpi.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
+#include <linux/platform_device.h>
+#include <linux/usb/typec.h>
+
+#define DRV_NAME "cros-ec-typec"
+
+/* Platform-specific data for the Chrome OS EC Type C controller. */
+struct cros_typec_data {
+	struct device *dev;
+	struct cros_ec_device *ec;
+	int num_ports;
+	unsigned int cmd_ver;
+	/* Array of ports, indexed by port number. */
+	struct typec_port *ports[EC_USB_PD_MAX_PORTS];
+	/* Initial capabilities for each port. */
+	struct typec_capability *caps[EC_USB_PD_MAX_PORTS];
+};
+
+static int cros_typec_parse_port_props(struct typec_capability *cap,
+				       struct fwnode_handle *fwnode,
+				       struct device *dev)
+{
+	const char *buf;
+	int ret;
+
+	memset(cap, 0, sizeof(*cap));
+	ret = fwnode_property_read_string(fwnode, "power-role", &buf);
+	if (ret) {
+		dev_err(dev, "power-role not found: %d\n", ret);
+		return ret;
+	}
+
+	ret = typec_find_port_power_role(buf);
+	if (ret < 0)
+		return ret;
+	cap->type = ret;
+
+	ret = fwnode_property_read_string(fwnode, "data-role", &buf);
+	if (ret) {
+		dev_err(dev, "data-role not found: %d\n", ret);
+		return ret;
+	}
+
+	ret = typec_find_port_data_role(buf);
+	if (ret < 0)
+		return ret;
+	cap->data = ret;
+
+	ret = fwnode_property_read_string(fwnode, "try-power-role", &buf);
+	if (ret) {
+		dev_err(dev, "try-power-role not found: %d\n", ret);
+		return ret;
+	}
+
+	ret = typec_find_power_role(buf);
+	if (ret < 0)
+		return ret;
+	cap->prefer_role = ret;
+
+	cap->fwnode = fwnode;
+
+	return 0;
+}
+
+static int cros_typec_init_ports(struct cros_typec_data *typec)
+{
+	struct device *dev = typec->dev;
+	struct typec_capability *cap;
+	struct fwnode_handle *fwnode;
+	const char *port_prop;
+	int ret;
+	int i;
+	int nports;
+	u32 port_num = 0;
+
+	nports = device_get_child_node_count(dev);
+	if (nports == 0) {
+		dev_err(dev, "No port entries found.\n");
+		return -ENODEV;
+	}
+
+	if (nports > typec->num_ports) {
+		dev_err(dev, "More ports listed than can be supported.\n");
+		return -EINVAL;
+	}
+
+	/* DT uses "reg" to specify port number. */
+	port_prop = dev->of_node ? "reg" : "port-number";
+	device_for_each_child_node(dev, fwnode) {
+		if (fwnode_property_read_u32(fwnode, port_prop, &port_num)) {
+			ret = -EINVAL;
+			dev_err(dev, "No port-number for port, aborting.\n");
+			goto unregister_ports;
+		}
+
+		if (port_num >= typec->num_ports) {
+			dev_err(dev, "Invalid port number.\n");
+			ret = -EINVAL;
+			goto unregister_ports;
+		}
+
+		dev_dbg(dev, "Registering port %d\n", port_num);
+
+		cap = devm_kzalloc(dev, sizeof(*cap), GFP_KERNEL);
+		if (!cap) {
+			ret = -ENOMEM;
+			goto unregister_ports;
+		}
+
+		typec->caps[port_num] = cap;
+
+		ret = cros_typec_parse_port_props(cap, fwnode, dev);
+		if (ret < 0)
+			goto unregister_ports;
+
+		typec->ports[port_num] = typec_register_port(dev, cap);
+		if (IS_ERR(typec->ports[port_num])) {
+			dev_err(dev, "Failed to register port %d\n", port_num);
+			ret = PTR_ERR(typec->ports[port_num]);
+			goto unregister_ports;
+		}
+	}
+
+	return 0;
+
+unregister_ports:
+	for (i = 0; i < typec->num_ports; i++)
+		typec_unregister_port(typec->ports[i]);
+	return ret;
+}
+
+static int cros_typec_ec_command(struct cros_typec_data *typec,
+				 unsigned int version,
+				 unsigned int command,
+				 void *outdata,
+				 unsigned int outsize,
+				 void *indata,
+				 unsigned int insize)
+{
+	struct cros_ec_command *msg;
+	int ret;
+
+	msg = kzalloc(sizeof(*msg) + max(outsize, insize), GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
+
+	msg->version = version;
+	msg->command = command;
+	msg->outsize = outsize;
+	msg->insize = insize;
+
+	if (outsize)
+		memcpy(msg->data, outdata, outsize);
+
+	ret = cros_ec_cmd_xfer_status(typec->ec, msg);
+	if (ret >= 0 && insize)
+		memcpy(indata, msg->data, insize);
+
+	kfree(msg);
+	return ret;
+}
+
+static void cros_typec_set_port_params_v0(struct cros_typec_data *typec,
+		int port_num, struct ec_response_usb_pd_control *resp)
+{
+	struct typec_port *port = typec->ports[port_num];
+	enum typec_orientation polarity;
+
+	if (!resp->enabled)
+		polarity = TYPEC_ORIENTATION_NONE;
+	else if (!resp->polarity)
+		polarity = TYPEC_ORIENTATION_NORMAL;
+	else
+		polarity = TYPEC_ORIENTATION_REVERSE;
+
+	typec_set_pwr_role(port, resp->role ? TYPEC_SOURCE : TYPEC_SINK);
+	typec_set_orientation(port, polarity);
+}
+
+static void cros_typec_set_port_params_v1(struct cros_typec_data *typec,
+		int port_num, struct ec_response_usb_pd_control_v1 *resp)
+{
+	struct typec_port *port = typec->ports[port_num];
+	enum typec_orientation polarity;
+
+	if (!(resp->enabled & PD_CTRL_RESP_ENABLED_CONNECTED))
+		polarity = TYPEC_ORIENTATION_NONE;
+	else if (!resp->polarity)
+		polarity = TYPEC_ORIENTATION_NORMAL;
+	else
+		polarity = TYPEC_ORIENTATION_REVERSE;
+	typec_set_orientation(port, polarity);
+	typec_set_data_role(port, resp->role & PD_CTRL_RESP_ROLE_DATA ?
+			TYPEC_HOST : TYPEC_DEVICE);
+	typec_set_pwr_role(port, resp->role & PD_CTRL_RESP_ROLE_POWER ?
+			TYPEC_SOURCE : TYPEC_SINK);
+	typec_set_vconn_role(port, resp->role & PD_CTRL_RESP_ROLE_VCONN ?
+			TYPEC_SOURCE : TYPEC_SINK);
+}
+
+static int cros_typec_port_update(struct cros_typec_data *typec, int port_num)
+{
+	struct ec_params_usb_pd_control req;
+	struct ec_response_usb_pd_control_v1 resp;
+	int ret;
+
+	if (port_num < 0 || port_num >= typec->num_ports) {
+		dev_err(typec->dev, "cannot get status for invalid port %d\n",
+			port_num);
+		return -EINVAL;
+	}
+
+	req.port = port_num;
+	req.role = USB_PD_CTRL_ROLE_NO_CHANGE;
+	req.mux = USB_PD_CTRL_MUX_NO_CHANGE;
+	req.swap = USB_PD_CTRL_SWAP_NONE;
+
+	ret = cros_typec_ec_command(typec, typec->cmd_ver,
+				    EC_CMD_USB_PD_CONTROL, &req, sizeof(req),
+				    &resp, sizeof(resp));
+	if (ret < 0)
+		return ret;
+
+	dev_dbg(typec->dev, "Enabled %d: 0x%hhx\n", port_num, resp.enabled);
+	dev_dbg(typec->dev, "Role %d: 0x%hhx\n", port_num, resp.role);
+	dev_dbg(typec->dev, "Polarity %d: 0x%hhx\n", port_num, resp.polarity);
+	dev_dbg(typec->dev, "State %d: %s\n", port_num, resp.state);
+
+	if (typec->cmd_ver == 1)
+		cros_typec_set_port_params_v1(typec, port_num, &resp);
+	else
+		cros_typec_set_port_params_v0(typec, port_num,
+			(struct ec_response_usb_pd_control *) &resp);
+
+	return 0;
+}
+
+static int cros_typec_get_cmd_version(struct cros_typec_data *typec)
+{
+	struct ec_params_get_cmd_versions_v1 req_v1;
+	struct ec_response_get_cmd_versions resp;
+	int ret;
+
+	/* We're interested in the PD control command version. */
+	req_v1.cmd = EC_CMD_USB_PD_CONTROL;
+	ret = cros_typec_ec_command(typec, 1, EC_CMD_GET_CMD_VERSIONS,
+				    &req_v1, sizeof(req_v1), &resp,
+				    sizeof(resp));
+	if (ret < 0)
+		return ret;
+
+	if (resp.version_mask & EC_VER_MASK(1))
+		typec->cmd_ver = 1;
+	else
+		typec->cmd_ver = 0;
+
+	dev_dbg(typec->dev, "PD Control has version mask 0x%hhx\n",
+		typec->cmd_ver);
+
+	return 0;
+}
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id cros_typec_acpi_id[] = {
+	{ "GOOG0014", 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(acpi, cros_typec_acpi_id);
+#endif
+
+#ifdef CONFIG_OF
+static const struct of_device_id cros_typec_of_match[] = {
+	{ .compatible = "google,cros-ec-typec", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, cros_typec_of_match);
+#endif
+
+static int cros_typec_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct cros_typec_data *typec;
+	struct ec_response_usb_pd_ports resp;
+	int ret, i;
+
+	typec = devm_kzalloc(dev, sizeof(*typec), GFP_KERNEL);
+	if (!typec)
+		return -ENOMEM;
+
+	typec->dev = dev;
+	typec->ec = dev_get_drvdata(pdev->dev.parent);
+	platform_set_drvdata(pdev, typec);
+
+	ret = cros_typec_get_cmd_version(typec);
+	if (ret < 0) {
+		dev_err(dev, "failed to get PD command version info\n");
+		return ret;
+	}
+
+	ret = cros_typec_ec_command(typec, 0, EC_CMD_USB_PD_PORTS, NULL, 0,
+				    &resp, sizeof(resp));
+	if (ret < 0)
+		return ret;
+
+	typec->num_ports = resp.num_ports;
+	if (typec->num_ports > EC_USB_PD_MAX_PORTS) {
+		dev_warn(typec->dev,
+			 "Too many ports reported: %d, limiting to max: %d\n",
+			 typec->num_ports, EC_USB_PD_MAX_PORTS);
+		typec->num_ports = EC_USB_PD_MAX_PORTS;
+	}
+
+	ret = cros_typec_init_ports(typec);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < typec->num_ports; i++) {
+		ret = cros_typec_port_update(typec, i);
+		if (ret < 0)
+			goto unregister_ports;
+	}
+
+	return 0;
+
+unregister_ports:
+	for (i = 0; i < typec->num_ports; i++)
+		if (typec->ports[i])
+			typec_unregister_port(typec->ports[i]);
+	return ret;
+}
+
+static struct platform_driver cros_typec_driver = {
+	.driver	= {
+		.name = DRV_NAME,
+		.acpi_match_table = ACPI_PTR(cros_typec_acpi_id),
+		.of_match_table = of_match_ptr(cros_typec_of_match),
+	},
+	.probe = cros_typec_probe,
+};
+
+module_platform_driver(cros_typec_driver);
+
+MODULE_AUTHOR("Prashant Malani <pmalani@chromium.org>");
+MODULE_DESCRIPTION("Chrome OS EC Type C control");
+MODULE_LICENSE("GPL");
diff --git a/drivers/platform/chrome/cros_ec_vbc.c b/drivers/platform/chrome/cros_ec_vbc.c
index 8edae46..46482d1 100644
--- a/drivers/platform/chrome/cros_ec_vbc.c
+++ b/drivers/platform/chrome/cros_ec_vbc.c
@@ -40,7 +40,7 @@ static ssize_t vboot_context_read(struct file *filp, struct kobject *kobj,
 	msg->outsize = para_sz;
 	msg->insize = resp_sz;
 
-	err = cros_ec_cmd_xfer(ecdev, msg);
+	err = cros_ec_cmd_xfer_status(ecdev, msg);
 	if (err < 0) {
 		dev_err(dev, "Error sending read request: %d\n", err);
 		kfree(msg);
@@ -83,7 +83,7 @@ static ssize_t vboot_context_write(struct file *filp, struct kobject *kobj,
 	msg->outsize = para_sz;
 	msg->insize = 0;
 
-	err = cros_ec_cmd_xfer(ecdev, msg);
+	err = cros_ec_cmd_xfer_status(ecdev, msg);
 	if (err < 0) {
 		dev_err(dev, "Error sending write request: %d\n", err);
 		kfree(msg);
diff --git a/drivers/platform/chrome/cros_usbpd_notify.c b/drivers/platform/chrome/cros_usbpd_notify.c
new file mode 100644
index 0000000..7f36142
--- /dev/null
+++ b/drivers/platform/chrome/cros_usbpd_notify.c
@@ -0,0 +1,306 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2020 Google LLC
+ *
+ * This driver serves as the receiver of cros_ec PD host events.
+ */
+
+#include <linux/acpi.h>
+#include <linux/module.h>
+#include <linux/platform_data/cros_ec_proto.h>
+#include <linux/platform_data/cros_usbpd_notify.h>
+#include <linux/platform_device.h>
+
+#define DRV_NAME "cros-usbpd-notify"
+#define DRV_NAME_PLAT_ACPI "cros-usbpd-notify-acpi"
+#define ACPI_DRV_NAME "GOOG0003"
+
+static BLOCKING_NOTIFIER_HEAD(cros_usbpd_notifier_list);
+
+struct cros_usbpd_notify_data {
+	struct device *dev;
+	struct cros_ec_device *ec;
+	struct notifier_block nb;
+};
+
+/**
+ * cros_usbpd_register_notify - Register a notifier callback for PD events.
+ * @nb: Notifier block pointer to register
+ *
+ * On ACPI platforms this corresponds to host events on the ECPD
+ * "GOOG0003" ACPI device. On non-ACPI platforms this will filter mkbp events
+ * for USB PD events.
+ *
+ * Return: 0 on success or negative error code.
+ */
+int cros_usbpd_register_notify(struct notifier_block *nb)
+{
+	return blocking_notifier_chain_register(&cros_usbpd_notifier_list,
+						nb);
+}
+EXPORT_SYMBOL_GPL(cros_usbpd_register_notify);
+
+/**
+ * cros_usbpd_unregister_notify - Unregister notifier callback for PD events.
+ * @nb: Notifier block pointer to unregister
+ *
+ * Unregister a notifier callback that was previously registered with
+ * cros_usbpd_register_notify().
+ */
+void cros_usbpd_unregister_notify(struct notifier_block *nb)
+{
+	blocking_notifier_chain_unregister(&cros_usbpd_notifier_list, nb);
+}
+EXPORT_SYMBOL_GPL(cros_usbpd_unregister_notify);
+
+/**
+ * cros_ec_pd_command - Send a command to the EC.
+ *
+ * @ec_dev: EC device
+ * @command: EC command
+ * @outdata: EC command output data
+ * @outsize: Size of outdata
+ * @indata: EC command input data
+ * @insize: Size of indata
+ *
+ * Return: >= 0 on success, negative error number on failure.
+ */
+static int cros_ec_pd_command(struct cros_ec_device *ec_dev,
+			      int command,
+			      uint8_t *outdata,
+			      int outsize,
+			      uint8_t *indata,
+			      int insize)
+{
+	struct cros_ec_command *msg;
+	int ret;
+
+	msg = kzalloc(sizeof(*msg) + max(insize, outsize), GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
+
+	msg->command = command;
+	msg->outsize = outsize;
+	msg->insize = insize;
+
+	if (outsize)
+		memcpy(msg->data, outdata, outsize);
+
+	ret = cros_ec_cmd_xfer_status(ec_dev, msg);
+	if (ret < 0)
+		goto error;
+
+	if (insize)
+		memcpy(indata, msg->data, insize);
+error:
+	kfree(msg);
+	return ret;
+}
+
+static void cros_usbpd_get_event_and_notify(struct device  *dev,
+					    struct cros_ec_device *ec_dev)
+{
+	struct ec_response_host_event_status host_event_status;
+	u32 event = 0;
+	int ret;
+
+	/*
+	 * We still send a 0 event out to older devices which don't
+	 * have the updated device heirarchy.
+	 */
+	if (!ec_dev) {
+		dev_dbg(dev,
+			"EC device inaccessible; sending 0 event status.\n");
+		goto send_notify;
+	}
+
+	/* Check for PD host events on EC. */
+	ret = cros_ec_pd_command(ec_dev, EC_CMD_PD_HOST_EVENT_STATUS,
+				 NULL, 0,
+				 (uint8_t *)&host_event_status,
+				 sizeof(host_event_status));
+	if (ret < 0) {
+		dev_warn(dev, "Can't get host event status (err: %d)\n", ret);
+		goto send_notify;
+	}
+
+	event = host_event_status.status;
+
+send_notify:
+	blocking_notifier_call_chain(&cros_usbpd_notifier_list, event, NULL);
+}
+
+#ifdef CONFIG_ACPI
+
+static void cros_usbpd_notify_acpi(acpi_handle device, u32 event, void *data)
+{
+	struct cros_usbpd_notify_data *pdnotify = data;
+
+	cros_usbpd_get_event_and_notify(pdnotify->dev, pdnotify->ec);
+}
+
+static int cros_usbpd_notify_probe_acpi(struct platform_device *pdev)
+{
+	struct cros_usbpd_notify_data *pdnotify;
+	struct device *dev = &pdev->dev;
+	struct acpi_device *adev;
+	struct cros_ec_device *ec_dev;
+	acpi_status status;
+
+	adev = ACPI_COMPANION(dev);
+
+	pdnotify = devm_kzalloc(dev, sizeof(*pdnotify), GFP_KERNEL);
+	if (!pdnotify)
+		return -ENOMEM;
+
+	/* Get the EC device pointer needed to talk to the EC. */
+	ec_dev = dev_get_drvdata(dev->parent);
+	if (!ec_dev) {
+		/*
+		 * We continue even for older devices which don't have the
+		 * correct device heirarchy, namely, GOOG0003 is a child
+		 * of GOOG0004.
+		 */
+		dev_warn(dev, "Couldn't get Chrome EC device pointer.\n");
+	}
+
+	pdnotify->dev = dev;
+	pdnotify->ec = ec_dev;
+
+	status = acpi_install_notify_handler(adev->handle,
+					     ACPI_ALL_NOTIFY,
+					     cros_usbpd_notify_acpi,
+					     pdnotify);
+	if (ACPI_FAILURE(status)) {
+		dev_warn(dev, "Failed to register notify handler %08x\n",
+			 status);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int cros_usbpd_notify_remove_acpi(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct acpi_device *adev = ACPI_COMPANION(dev);
+
+	acpi_remove_notify_handler(adev->handle, ACPI_ALL_NOTIFY,
+				   cros_usbpd_notify_acpi);
+
+	return 0;
+}
+
+static const struct acpi_device_id cros_usbpd_notify_acpi_device_ids[] = {
+	{ ACPI_DRV_NAME, 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, cros_usbpd_notify_acpi_device_ids);
+
+static struct platform_driver cros_usbpd_notify_acpi_driver = {
+	.driver = {
+		.name = DRV_NAME_PLAT_ACPI,
+		.acpi_match_table = cros_usbpd_notify_acpi_device_ids,
+	},
+	.probe = cros_usbpd_notify_probe_acpi,
+	.remove = cros_usbpd_notify_remove_acpi,
+};
+
+#endif /* CONFIG_ACPI */
+
+static int cros_usbpd_notify_plat(struct notifier_block *nb,
+				  unsigned long queued_during_suspend,
+				  void *data)
+{
+	struct cros_usbpd_notify_data *pdnotify = container_of(nb,
+			struct cros_usbpd_notify_data, nb);
+	struct cros_ec_device *ec_dev = (struct cros_ec_device *)data;
+	u32 host_event = cros_ec_get_host_event(ec_dev);
+
+	if (!host_event)
+		return NOTIFY_DONE;
+
+	if (host_event & EC_HOST_EVENT_MASK(EC_HOST_EVENT_PD_MCU)) {
+		cros_usbpd_get_event_and_notify(pdnotify->dev, ec_dev);
+		return NOTIFY_OK;
+	}
+	return NOTIFY_DONE;
+}
+
+static int cros_usbpd_notify_probe_plat(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct cros_ec_dev *ecdev = dev_get_drvdata(dev->parent);
+	struct cros_usbpd_notify_data *pdnotify;
+	int ret;
+
+	pdnotify = devm_kzalloc(dev, sizeof(*pdnotify), GFP_KERNEL);
+	if (!pdnotify)
+		return -ENOMEM;
+
+	pdnotify->dev = dev;
+	pdnotify->ec = ecdev->ec_dev;
+	pdnotify->nb.notifier_call = cros_usbpd_notify_plat;
+
+	dev_set_drvdata(dev, pdnotify);
+
+	ret = blocking_notifier_chain_register(&ecdev->ec_dev->event_notifier,
+					       &pdnotify->nb);
+	if (ret < 0) {
+		dev_err(dev, "Failed to register notifier\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int cros_usbpd_notify_remove_plat(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct cros_ec_dev *ecdev = dev_get_drvdata(dev->parent);
+	struct cros_usbpd_notify_data *pdnotify =
+		(struct cros_usbpd_notify_data *)dev_get_drvdata(dev);
+
+	blocking_notifier_chain_unregister(&ecdev->ec_dev->event_notifier,
+					   &pdnotify->nb);
+
+	return 0;
+}
+
+static struct platform_driver cros_usbpd_notify_plat_driver = {
+	.driver = {
+		.name = DRV_NAME,
+	},
+	.probe = cros_usbpd_notify_probe_plat,
+	.remove = cros_usbpd_notify_remove_plat,
+};
+
+static int __init cros_usbpd_notify_init(void)
+{
+	int ret;
+
+	ret = platform_driver_register(&cros_usbpd_notify_plat_driver);
+	if (ret < 0)
+		return ret;
+
+#ifdef CONFIG_ACPI
+	platform_driver_register(&cros_usbpd_notify_acpi_driver);
+#endif
+	return 0;
+}
+
+static void __exit cros_usbpd_notify_exit(void)
+{
+#ifdef CONFIG_ACPI
+	platform_driver_unregister(&cros_usbpd_notify_acpi_driver);
+#endif
+	platform_driver_unregister(&cros_usbpd_notify_plat_driver);
+}
+
+module_init(cros_usbpd_notify_init);
+module_exit(cros_usbpd_notify_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("ChromeOS power delivery notifier device");
+MODULE_AUTHOR("Jon Flatley <jflat@chromium.org>");
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/platform/chrome/wilco_ec/event.c b/drivers/platform/chrome/wilco_ec/event.c
index dba3d44..8145185 100644
--- a/drivers/platform/chrome/wilco_ec/event.c
+++ b/drivers/platform/chrome/wilco_ec/event.c
@@ -79,7 +79,7 @@ static DEFINE_IDA(event_ida);
 struct ec_event {
 	u16 size;
 	u16 type;
-	u16 event[0];
+	u16 event[];
 } __packed;
 
 #define ec_event_num_words(ev) (ev->size - 1)
@@ -96,7 +96,7 @@ struct ec_event_queue {
 	int capacity;
 	int head;
 	int tail;
-	struct ec_event *entries[0];
+	struct ec_event *entries[];
 };
 
 /* Maximum number of events to store in ec_event_queue */
diff --git a/drivers/platform/chrome/wilco_ec/properties.c b/drivers/platform/chrome/wilco_ec/properties.c
index 62f2761..c2bf4c9 100644
--- a/drivers/platform/chrome/wilco_ec/properties.c
+++ b/drivers/platform/chrome/wilco_ec/properties.c
@@ -3,8 +3,11 @@
  * Copyright 2019 Google LLC
  */
 
+#include <linux/errno.h>
+#include <linux/export.h>
 #include <linux/platform_data/wilco-ec.h>
 #include <linux/string.h>
+#include <linux/types.h>
 #include <asm/unaligned.h>
 
 /* Operation code; what the EC should do with the property */
diff --git a/drivers/platform/chrome/wilco_ec/sysfs.c b/drivers/platform/chrome/wilco_ec/sysfs.c
index f0d174b..3c587b4 100644
--- a/drivers/platform/chrome/wilco_ec/sysfs.c
+++ b/drivers/platform/chrome/wilco_ec/sysfs.c
@@ -8,8 +8,12 @@
  * See Documentation/ABI/testing/sysfs-platform-wilco-ec for more information.
  */
 
+#include <linux/device.h>
+#include <linux/kernel.h>
 #include <linux/platform_data/wilco-ec.h>
+#include <linux/string.h>
 #include <linux/sysfs.h>
+#include <linux/types.h>
 
 #define CMD_KB_CMOS			0x7C
 #define SUB_CMD_KB_CMOS_AUTO_ON		0x03
diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c
index 74e988f..f8d3e3b 100644
--- a/drivers/platform/x86/dell-laptop.c
+++ b/drivers/platform/x86/dell-laptop.c
@@ -4,7 +4,7 @@
  *
  *  Copyright (c) Red Hat <mjg@redhat.com>
  *  Copyright (c) 2014 Gabriele Mazzotta <gabriele.mzt@gmail.com>
- *  Copyright (c) 2014 Pali Rohár <pali.rohar@gmail.com>
+ *  Copyright (c) 2014 Pali Rohár <pali@kernel.org>
  *
  *  Based on documentation in the libsmbios package:
  *  Copyright (C) 2005-2014 Dell Inc.
@@ -2295,6 +2295,6 @@ module_exit(dell_exit);
 
 MODULE_AUTHOR("Matthew Garrett <mjg@redhat.com>");
 MODULE_AUTHOR("Gabriele Mazzotta <gabriele.mzt@gmail.com>");
-MODULE_AUTHOR("Pali Rohár <pali.rohar@gmail.com>");
+MODULE_AUTHOR("Pali Rohár <pali@kernel.org>");
 MODULE_DESCRIPTION("Dell laptop driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/platform/x86/dell-rbtn.c b/drivers/platform/x86/dell-rbtn.c
index a6b856c..a89fad4 100644
--- a/drivers/platform/x86/dell-rbtn.c
+++ b/drivers/platform/x86/dell-rbtn.c
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
     Dell Airplane Mode Switch driver
-    Copyright (C) 2014-2015  Pali Rohár <pali.rohar@gmail.com>
+    Copyright (C) 2014-2015  Pali Rohár <pali@kernel.org>
 
 */
 
@@ -495,5 +495,5 @@ MODULE_PARM_DESC(auto_remove_rfkill, "Automatically remove rfkill devices when "
 				     "(default true)");
 MODULE_DEVICE_TABLE(acpi, rbtn_ids);
 MODULE_DESCRIPTION("Dell Airplane Mode Switch driver");
-MODULE_AUTHOR("Pali Rohár <pali.rohar@gmail.com>");
+MODULE_AUTHOR("Pali Rohár <pali@kernel.org>");
 MODULE_LICENSE("GPL");
diff --git a/drivers/platform/x86/dell-rbtn.h b/drivers/platform/x86/dell-rbtn.h
index 0fdc816..5e030f9 100644
--- a/drivers/platform/x86/dell-rbtn.h
+++ b/drivers/platform/x86/dell-rbtn.h
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
     Dell Airplane Mode Switch driver
-    Copyright (C) 2014-2015  Pali Rohár <pali.rohar@gmail.com>
+    Copyright (C) 2014-2015  Pali Rohár <pali@kernel.org>
 
 */
 
diff --git a/drivers/platform/x86/dell-smbios-base.c b/drivers/platform/x86/dell-smbios-base.c
index fe59b0e..2e2cd56 100644
--- a/drivers/platform/x86/dell-smbios-base.c
+++ b/drivers/platform/x86/dell-smbios-base.c
@@ -4,7 +4,7 @@
  *
  *  Copyright (c) Red Hat <mjg@redhat.com>
  *  Copyright (c) 2014 Gabriele Mazzotta <gabriele.mzt@gmail.com>
- *  Copyright (c) 2014 Pali Rohár <pali.rohar@gmail.com>
+ *  Copyright (c) 2014 Pali Rohár <pali@kernel.org>
  *
  *  Based on documentation in the libsmbios package:
  *  Copyright (C) 2005-2014 Dell Inc.
@@ -645,7 +645,7 @@ module_exit(dell_smbios_exit);
 
 MODULE_AUTHOR("Matthew Garrett <mjg@redhat.com>");
 MODULE_AUTHOR("Gabriele Mazzotta <gabriele.mzt@gmail.com>");
-MODULE_AUTHOR("Pali Rohár <pali.rohar@gmail.com>");
+MODULE_AUTHOR("Pali Rohár <pali@kernel.org>");
 MODULE_AUTHOR("Mario Limonciello <mario.limonciello@dell.com>");
 MODULE_DESCRIPTION("Common functions for kernel modules using Dell SMBIOS");
 MODULE_LICENSE("GPL");
diff --git a/drivers/platform/x86/dell-smbios-smm.c b/drivers/platform/x86/dell-smbios-smm.c
index d6854d1..97c52a8 100644
--- a/drivers/platform/x86/dell-smbios-smm.c
+++ b/drivers/platform/x86/dell-smbios-smm.c
@@ -4,7 +4,7 @@
  *
  *  Copyright (c) Red Hat <mjg@redhat.com>
  *  Copyright (c) 2014 Gabriele Mazzotta <gabriele.mzt@gmail.com>
- *  Copyright (c) 2014 Pali Rohár <pali.rohar@gmail.com>
+ *  Copyright (c) 2014 Pali Rohár <pali@kernel.org>
  *  Copyright (c) 2017 Dell Inc.
  */
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
diff --git a/drivers/platform/x86/dell-smbios.h b/drivers/platform/x86/dell-smbios.h
index a7ff980..75fa8ea 100644
--- a/drivers/platform/x86/dell-smbios.h
+++ b/drivers/platform/x86/dell-smbios.h
@@ -4,7 +4,7 @@
  *
  *  Copyright (c) Red Hat <mjg@redhat.com>
  *  Copyright (c) 2014 Gabriele Mazzotta <gabriele.mzt@gmail.com>
- *  Copyright (c) 2014 Pali Rohár <pali.rohar@gmail.com>
+ *  Copyright (c) 2014 Pali Rohár <pali@kernel.org>
  *
  *  Based on documentation in the libsmbios package:
  *  Copyright (C) 2005-2014 Dell Inc.
diff --git a/drivers/platform/x86/dell-smo8800.c b/drivers/platform/x86/dell-smo8800.c
index b531fe8..5d9304a 100644
--- a/drivers/platform/x86/dell-smo8800.c
+++ b/drivers/platform/x86/dell-smo8800.c
@@ -3,7 +3,7 @@
  *  dell-smo8800.c - Dell Latitude ACPI SMO88XX freefall sensor driver
  *
  *  Copyright (C) 2012 Sonal Santan <sonal.santan@gmail.com>
- *  Copyright (C) 2014 Pali Rohár <pali.rohar@gmail.com>
+ *  Copyright (C) 2014 Pali Rohár <pali@kernel.org>
  *
  *  This is loosely based on lis3lv02d driver.
  */
diff --git a/drivers/platform/x86/dell-wmi.c b/drivers/platform/x86/dell-wmi.c
index 6669db2..86e8dd6 100644
--- a/drivers/platform/x86/dell-wmi.c
+++ b/drivers/platform/x86/dell-wmi.c
@@ -3,7 +3,7 @@
  * Dell WMI hotkeys
  *
  * Copyright (C) 2008 Red Hat <mjg@redhat.com>
- * Copyright (C) 2014-2015 Pali Rohár <pali.rohar@gmail.com>
+ * Copyright (C) 2014-2015 Pali Rohár <pali@kernel.org>
  *
  * Portions based on wistron_btns.c:
  * Copyright (C) 2005 Miloslav Trmac <mitr@volny.cz>
@@ -29,7 +29,7 @@
 #include "dell-wmi-descriptor.h"
 
 MODULE_AUTHOR("Matthew Garrett <mjg@redhat.com>");
-MODULE_AUTHOR("Pali Rohár <pali.rohar@gmail.com>");
+MODULE_AUTHOR("Pali Rohár <pali@kernel.org>");
 MODULE_DESCRIPTION("Dell laptop WMI hotkeys driver");
 MODULE_LICENSE("GPL");
 
diff --git a/drivers/platform/x86/intel-hid.c b/drivers/platform/x86/intel-hid.c
index 5f4f571..cc7dd4d 100644
--- a/drivers/platform/x86/intel-hid.c
+++ b/drivers/platform/x86/intel-hid.c
@@ -19,8 +19,8 @@ MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Alex Hung");
 
 static const struct acpi_device_id intel_hid_ids[] = {
-	{"INT1051", 0},
 	{"INT33D5", 0},
+	{"INTC1051", 0},
 	{"", 0},
 };
 MODULE_DEVICE_TABLE(acpi, intel_hid_ids);
diff --git a/drivers/platform/x86/intel_int0002_vgpio.c b/drivers/platform/x86/intel_int0002_vgpio.c
index 7b23efc..289c665 100644
--- a/drivers/platform/x86/intel_int0002_vgpio.c
+++ b/drivers/platform/x86/intel_int0002_vgpio.c
@@ -127,6 +127,14 @@ static irqreturn_t int0002_irq(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
+static bool int0002_check_wake(void *data)
+{
+	u32 gpe_sts_reg;
+
+	gpe_sts_reg = inl(GPE0A_STS_PORT);
+	return (gpe_sts_reg & GPE0A_PME_B0_STS_BIT);
+}
+
 static struct irq_chip int0002_byt_irqchip = {
 	.name			= DRV_NAME,
 	.irq_ack		= int0002_irq_ack,
@@ -220,6 +228,7 @@ static int int0002_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	acpi_register_wakeup_handler(irq, int0002_check_wake, NULL);
 	device_init_wakeup(dev, true);
 	return 0;
 }
@@ -227,6 +236,7 @@ static int int0002_probe(struct platform_device *pdev)
 static int int0002_remove(struct platform_device *pdev)
 {
 	device_init_wakeup(&pdev->dev, false);
+	acpi_unregister_wakeup_handler(int0002_check_wake, NULL);
 	return 0;
 }
 
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index 513efe8..8903803 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -248,7 +248,7 @@
 	  action according to the mode.
 
 config POWER_RESET_SC27XX
-	bool "Spreadtrum SC27xx PMIC power-off driver"
+	tristate "Spreadtrum SC27xx PMIC power-off driver"
 	depends on MFD_SC27XX_PMIC || COMPILE_TEST
 	help
 	  This driver supports powering off a system through
diff --git a/drivers/power/reset/at91-reset.c b/drivers/power/reset/at91-reset.c
index d94e326..3ff9d93 100644
--- a/drivers/power/reset/at91-reset.c
+++ b/drivers/power/reset/at91-reset.c
@@ -35,6 +35,7 @@
 
 #define AT91_RSTC_MR	0x08		/* Reset Controller Mode Register */
 #define AT91_RSTC_URSTEN	BIT(0)		/* User Reset Enable */
+#define AT91_RSTC_URSTASYNC	BIT(2)		/* User Reset Asynchronous Control */
 #define AT91_RSTC_URSTIEN	BIT(4)		/* User Reset Interrupt Enable */
 #define AT91_RSTC_ERSTL		GENMASK(11, 8)	/* External Reset Length */
 
@@ -49,105 +50,63 @@ enum reset_type {
 	RESET_TYPE_ULP2		= 8,
 };
 
-static void __iomem *at91_ramc_base[2], *at91_rstc_base;
-static struct clk *sclk;
+struct at91_reset {
+	void __iomem *rstc_base;
+	void __iomem *ramc_base[2];
+	struct clk *sclk;
+	struct notifier_block nb;
+	u32 args;
+	u32 ramc_lpr;
+};
 
 /*
 * unless the SDRAM is cleanly shutdown before we hit the
 * reset register it can be left driving the data bus and
 * killing the chance of a subsequent boot from NAND
 */
-static int at91sam9260_restart(struct notifier_block *this, unsigned long mode,
-			       void *cmd)
+static int at91_reset(struct notifier_block *this, unsigned long mode,
+		      void *cmd)
 {
+	struct at91_reset *reset = container_of(this, struct at91_reset, nb);
+
 	asm volatile(
 		/* Align to cache lines */
 		".balign 32\n\t"
 
-		/* Disable SDRAM accesses */
-		"str	%2, [%0, #" __stringify(AT91_SDRAMC_TR) "]\n\t"
-
-		/* Power down SDRAM */
-		"str	%3, [%0, #" __stringify(AT91_SDRAMC_LPR) "]\n\t"
-
-		/* Reset CPU */
-		"str	%4, [%1, #" __stringify(AT91_RSTC_CR) "]\n\t"
-
-		"b	.\n\t"
-		:
-		: "r" (at91_ramc_base[0]),
-		  "r" (at91_rstc_base),
-		  "r" (1),
-		  "r" cpu_to_le32(AT91_SDRAMC_LPCB_POWER_DOWN),
-		  "r" cpu_to_le32(AT91_RSTC_KEY | AT91_RSTC_PERRST | AT91_RSTC_PROCRST));
-
-	return NOTIFY_DONE;
-}
-
-static int at91sam9g45_restart(struct notifier_block *this, unsigned long mode,
-			       void *cmd)
-{
-	asm volatile(
-		/*
-		 * Test wether we have a second RAM controller to care
-		 * about.
-		 *
-		 * First, test that we can dereference the virtual address.
-		 */
-		"cmp	%1, #0\n\t"
-		"beq	1f\n\t"
-
-		/* Then, test that the RAM controller is enabled */
-		"ldr	r0, [%1]\n\t"
-		"cmp	r0, #0\n\t"
-
-		/* Align to cache lines */
-		".balign 32\n\t"
-
 		/* Disable SDRAM0 accesses */
-		"1:	str	%3, [%0, #" __stringify(AT91_DDRSDRC_RTR) "]\n\t"
+		"	tst	%0, #0\n\t"
+		"	beq	1f\n\t"
+		"	str	%3, [%0, #" __stringify(AT91_DDRSDRC_RTR) "]\n\t"
 		/* Power down SDRAM0 */
-		"	str	%4, [%0, #" __stringify(AT91_DDRSDRC_LPR) "]\n\t"
+		"	str	%4, [%0, %6]\n\t"
 		/* Disable SDRAM1 accesses */
+		"1:	tst	%1, #0\n\t"
+		"	beq	2f\n\t"
 		"	strne	%3, [%1, #" __stringify(AT91_DDRSDRC_RTR) "]\n\t"
 		/* Power down SDRAM1 */
-		"	strne	%4, [%1, #" __stringify(AT91_DDRSDRC_LPR) "]\n\t"
+		"	strne	%4, [%1, %6]\n\t"
 		/* Reset CPU */
-		"	str	%5, [%2, #" __stringify(AT91_RSTC_CR) "]\n\t"
+		"2:	str	%5, [%2, #" __stringify(AT91_RSTC_CR) "]\n\t"
 
 		"	b	.\n\t"
 		:
-		: "r" (at91_ramc_base[0]),
-		  "r" (at91_ramc_base[1]),
-		  "r" (at91_rstc_base),
+		: "r" (reset->ramc_base[0]),
+		  "r" (reset->ramc_base[1]),
+		  "r" (reset->rstc_base),
 		  "r" (1),
 		  "r" cpu_to_le32(AT91_DDRSDRC_LPCB_POWER_DOWN),
-		  "r" cpu_to_le32(AT91_RSTC_KEY | AT91_RSTC_PERRST | AT91_RSTC_PROCRST)
-		: "r0");
+		  "r" (reset->args),
+		  "r" (reset->ramc_lpr)
+		: "r4");
 
 	return NOTIFY_DONE;
 }
 
-static int sama5d3_restart(struct notifier_block *this, unsigned long mode,
-			   void *cmd)
-{
-	writel(AT91_RSTC_KEY | AT91_RSTC_PERRST | AT91_RSTC_PROCRST,
-	       at91_rstc_base);
-
-	return NOTIFY_DONE;
-}
-
-static int samx7_restart(struct notifier_block *this, unsigned long mode,
-			 void *cmd)
-{
-	writel(AT91_RSTC_KEY | AT91_RSTC_PROCRST, at91_rstc_base);
-	return NOTIFY_DONE;
-}
-
-static void __init at91_reset_status(struct platform_device *pdev)
+static void __init at91_reset_status(struct platform_device *pdev,
+				     void __iomem *base)
 {
 	const char *reason;
-	u32 reg = readl(at91_rstc_base + AT91_RSTC_SR);
+	u32 reg = readl(base + AT91_RSTC_SR);
 
 	switch ((reg & AT91_RSTC_RSTTYP) >> 8) {
 	case RESET_TYPE_GENERAL:
@@ -183,42 +142,68 @@ static void __init at91_reset_status(struct platform_device *pdev)
 }
 
 static const struct of_device_id at91_ramc_of_match[] = {
-	{ .compatible = "atmel,at91sam9260-sdramc", },
-	{ .compatible = "atmel,at91sam9g45-ddramc", },
+	{
+		.compatible = "atmel,at91sam9260-sdramc",
+		.data = (void *)AT91_SDRAMC_LPR,
+	},
+	{
+		.compatible = "atmel,at91sam9g45-ddramc",
+		.data = (void *)AT91_DDRSDRC_LPR,
+	},
 	{ /* sentinel */ }
 };
 
 static const struct of_device_id at91_reset_of_match[] = {
-	{ .compatible = "atmel,at91sam9260-rstc", .data = at91sam9260_restart },
-	{ .compatible = "atmel,at91sam9g45-rstc", .data = at91sam9g45_restart },
-	{ .compatible = "atmel,sama5d3-rstc", .data = sama5d3_restart },
-	{ .compatible = "atmel,samx7-rstc", .data = samx7_restart },
-	{ .compatible = "microchip,sam9x60-rstc", .data = samx7_restart },
+	{
+		.compatible = "atmel,at91sam9260-rstc",
+		.data = (void *)(AT91_RSTC_KEY | AT91_RSTC_PERRST |
+				 AT91_RSTC_PROCRST),
+	},
+	{
+		.compatible = "atmel,at91sam9g45-rstc",
+		.data = (void *)(AT91_RSTC_KEY | AT91_RSTC_PERRST |
+				 AT91_RSTC_PROCRST)
+	},
+	{
+		.compatible = "atmel,sama5d3-rstc",
+		.data = (void *)(AT91_RSTC_KEY | AT91_RSTC_PERRST |
+				 AT91_RSTC_PROCRST)
+	},
+	{
+		.compatible = "atmel,samx7-rstc",
+		.data = (void *)(AT91_RSTC_KEY | AT91_RSTC_PROCRST)
+	},
+	{
+		.compatible = "microchip,sam9x60-rstc",
+		.data = (void *)(AT91_RSTC_KEY | AT91_RSTC_PROCRST)
+	},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, at91_reset_of_match);
 
-static struct notifier_block at91_restart_nb = {
-	.priority = 192,
-};
-
 static int __init at91_reset_probe(struct platform_device *pdev)
 {
 	const struct of_device_id *match;
+	struct at91_reset *reset;
 	struct device_node *np;
 	int ret, idx = 0;
 
-	at91_rstc_base = of_iomap(pdev->dev.of_node, 0);
-	if (!at91_rstc_base) {
+	reset = devm_kzalloc(&pdev->dev, sizeof(*reset), GFP_KERNEL);
+	if (!reset)
+		return -ENOMEM;
+
+	reset->rstc_base = of_iomap(pdev->dev.of_node, 0);
+	if (!reset->rstc_base) {
 		dev_err(&pdev->dev, "Could not map reset controller address\n");
 		return -ENODEV;
 	}
 
 	if (!of_device_is_compatible(pdev->dev.of_node, "atmel,sama5d3-rstc")) {
 		/* we need to shutdown the ddr controller, so get ramc base */
-		for_each_matching_node(np, at91_ramc_of_match) {
-			at91_ramc_base[idx] = of_iomap(np, 0);
-			if (!at91_ramc_base[idx]) {
+		for_each_matching_node_and_match(np, at91_ramc_of_match, &match) {
+			reset->ramc_lpr = (u32)match->data;
+			reset->ramc_base[idx] = of_iomap(np, 0);
+			if (!reset->ramc_base[idx]) {
 				dev_err(&pdev->dev, "Could not map ram controller address\n");
 				of_node_put(np);
 				return -ENODEV;
@@ -228,33 +213,46 @@ static int __init at91_reset_probe(struct platform_device *pdev)
 	}
 
 	match = of_match_node(at91_reset_of_match, pdev->dev.of_node);
-	at91_restart_nb.notifier_call = match->data;
+	reset->nb.notifier_call = at91_reset;
+	reset->nb.priority = 192;
+	reset->args = (u32)match->data;
 
-	sclk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(sclk))
-		return PTR_ERR(sclk);
+	reset->sclk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(reset->sclk))
+		return PTR_ERR(reset->sclk);
 
-	ret = clk_prepare_enable(sclk);
+	ret = clk_prepare_enable(reset->sclk);
 	if (ret) {
 		dev_err(&pdev->dev, "Could not enable slow clock\n");
 		return ret;
 	}
 
-	ret = register_restart_handler(&at91_restart_nb);
+	platform_set_drvdata(pdev, reset);
+
+	if (of_device_is_compatible(pdev->dev.of_node, "microchip,sam9x60-rstc")) {
+		u32 val = readl(reset->rstc_base + AT91_RSTC_MR);
+
+		writel(AT91_RSTC_KEY | AT91_RSTC_URSTASYNC | val,
+		       reset->rstc_base + AT91_RSTC_MR);
+	}
+
+	ret = register_restart_handler(&reset->nb);
 	if (ret) {
-		clk_disable_unprepare(sclk);
+		clk_disable_unprepare(reset->sclk);
 		return ret;
 	}
 
-	at91_reset_status(pdev);
+	at91_reset_status(pdev, reset->rstc_base);
 
 	return 0;
 }
 
 static int __exit at91_reset_remove(struct platform_device *pdev)
 {
-	unregister_restart_handler(&at91_restart_nb);
-	clk_disable_unprepare(sclk);
+	struct at91_reset *reset = platform_get_drvdata(pdev);
+
+	unregister_restart_handler(&reset->nb);
+	clk_disable_unprepare(reset->sclk);
 
 	return 0;
 }
diff --git a/drivers/power/reset/sc27xx-poweroff.c b/drivers/power/reset/sc27xx-poweroff.c
index 29fb08b..90287c3 100644
--- a/drivers/power/reset/sc27xx-poweroff.c
+++ b/drivers/power/reset/sc27xx-poweroff.c
@@ -6,6 +6,7 @@
 
 #include <linux/cpu.h>
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/pm.h>
 #include <linux/regmap.h>
@@ -13,6 +14,8 @@
 
 #define SC27XX_PWR_PD_HW	0xc2c
 #define SC27XX_PWR_OFF_EN	BIT(0)
+#define SC27XX_SLP_CTRL		0xdf0
+#define SC27XX_LDO_XTL_EN	BIT(3)
 
 static struct regmap *regmap;
 
@@ -27,10 +30,13 @@ static struct regmap *regmap;
  */
 static void sc27xx_poweroff_shutdown(void)
 {
-#ifdef CONFIG_PM_SLEEP_SMP
-	int cpu = smp_processor_id();
+#ifdef CONFIG_HOTPLUG_CPU
+	int cpu;
 
-	freeze_secondary_cpus(cpu);
+	for_each_online_cpu(cpu) {
+		if (cpu != smp_processor_id())
+			remove_cpu(cpu);
+	}
 #endif
 }
 
@@ -40,6 +46,9 @@ static struct syscore_ops poweroff_syscore_ops = {
 
 static void sc27xx_poweroff_do_poweroff(void)
 {
+	/* Disable the external subsys connection's power firstly */
+	regmap_write(regmap, SC27XX_SLP_CTRL, SC27XX_LDO_XTL_EN);
+
 	regmap_write(regmap, SC27XX_PWR_PD_HW, SC27XX_PWR_OFF_EN);
 }
 
@@ -63,4 +72,8 @@ static struct platform_driver sc27xx_poweroff_driver = {
 		.name = "sc27xx-poweroff",
 	},
 };
-builtin_platform_driver(sc27xx_poweroff_driver);
+module_platform_driver(sc27xx_poweroff_driver);
+
+MODULE_DESCRIPTION("Power off driver for SC27XX PMIC Device");
+MODULE_AUTHOR("Baolin Wang <baolin.wang@unisoc.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index 9a5591a..f3424fd 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -480,7 +480,7 @@
 	  called gpio-charger.
 
 config CHARGER_MANAGER
-	bool "Battery charger manager for multiple chargers"
+	tristate "Battery charger manager for multiple chargers"
 	depends on REGULATOR
 	select EXTCON
 	help
@@ -659,7 +659,7 @@
 
 config CHARGER_CROS_USBPD
 	tristate "ChromeOS EC based USBPD charger"
-	depends on CROS_EC
+	depends on CROS_USBPD_NOTIFY
 	default n
 	help
 	  Say Y here to enable ChromeOS EC based USBPD charger
diff --git a/drivers/power/supply/ab8500_charger.c b/drivers/power/supply/ab8500_charger.c
index f69550d..9469fe1 100644
--- a/drivers/power/supply/ab8500_charger.c
+++ b/drivers/power/supply/ab8500_charger.c
@@ -404,7 +404,7 @@ static void ab8500_enable_disable_sw_fallback(struct ab8500_charger *di,
 }
 
 /**
- * ab8500_power_supply_changed - a wrapper with local extentions for
+ * ab8500_power_supply_changed - a wrapper with local extensions for
  * power_supply_changed
  * @di:	  pointer to the ab8500_charger structure
  * @psy:  pointer to power_supply_that have changed.
@@ -683,7 +683,7 @@ static int ab8500_charger_max_usb_curr(struct ab8500_charger *di,
 	/*
 	 * Platform only supports USB 2.0.
 	 * This means that charging current from USB source
-	 * is maximum 500 mA. Every occurence of USB_STAT_*_HOST_*
+	 * is maximum 500 mA. Every occurrence of USB_STAT_*_HOST_*
 	 * should set USB_CH_IP_CUR_LVL_0P5.
 	 */
 
@@ -1379,13 +1379,13 @@ static int ab8500_charger_ac_en(struct ux500_charger *charger,
 
 		/*
 		 * Due to a bug in AB8500, BTEMP_HIGH/LOW interrupts
-		 * will be triggered everytime we enable the VDD ADC supply.
+		 * will be triggered every time we enable the VDD ADC supply.
 		 * This will turn off charging for a short while.
 		 * It can be avoided by having the supply on when
 		 * there is a charger enabled. Normally the VDD ADC supply
-		 * is enabled everytime a GPADC conversion is triggered. We will
-		 * force it to be enabled from this driver to have
-		 * the GPADC module independant of the AB8500 chargers
+		 * is enabled every time a GPADC conversion is triggered.
+		 * We will force it to be enabled from this driver to have
+		 * the GPADC module independent of the AB8500 chargers
 		 */
 		if (!di->vddadc_en_ac) {
 			ret = regulator_enable(di->regu);
@@ -1455,7 +1455,7 @@ static int ab8500_charger_ac_en(struct ux500_charger *charger,
 		if (is_ab8500_1p1_or_earlier(di->parent)) {
 			/*
 			 * For ABB revision 1.0 and 1.1 there is a bug in the
-			 * watchdog logic. That means we have to continously
+			 * watchdog logic. That means we have to continuously
 			 * kick the charger watchdog even when no charger is
 			 * connected. This is only valid once the AC charger
 			 * has been enabled. This is a bug that is not handled
@@ -1552,13 +1552,13 @@ static int ab8500_charger_usb_en(struct ux500_charger *charger,
 
 		/*
 		 * Due to a bug in AB8500, BTEMP_HIGH/LOW interrupts
-		 * will be triggered everytime we enable the VDD ADC supply.
+		 * will be triggered every time we enable the VDD ADC supply.
 		 * This will turn off charging for a short while.
 		 * It can be avoided by having the supply on when
 		 * there is a charger enabled. Normally the VDD ADC supply
-		 * is enabled everytime a GPADC conversion is triggered. We will
-		 * force it to be enabled from this driver to have
-		 * the GPADC module independant of the AB8500 chargers
+		 * is enabled every time a GPADC conversion is triggered.
+		 * We will force it to be enabled from this driver to have
+		 * the GPADC module independent of the AB8500 chargers
 		 */
 		if (!di->vddadc_en_usb) {
 			ret = regulator_enable(di->regu);
@@ -1582,7 +1582,10 @@ static int ab8500_charger_usb_en(struct ux500_charger *charger,
 			return -ENXIO;
 		}
 
-		/* ChVoltLevel: max voltage upto which battery can be charged */
+		/*
+		 * ChVoltLevel: max voltage up to which battery can be
+		 * charged
+		 */
 		ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
 			AB8500_CH_VOLT_LVL_REG, (u8) volt_index);
 		if (ret) {
@@ -2014,7 +2017,7 @@ static void ab8500_charger_check_hw_failure_work(struct work_struct *work)
  * Work queue function for kicking the charger watchdog.
  *
  * For ABB revision 1.0 and 1.1 there is a bug in the watchdog
- * logic. That means we have to continously kick the charger
+ * logic. That means we have to continuously kick the charger
  * watchdog even when no charger is connected. This is only
  * valid once the AC charger has been enabled. This is
  * a bug that is not handled by the algorithm and the
@@ -2262,7 +2265,7 @@ static void ab8500_charger_usb_link_status_work(struct work_struct *work)
 	 * Some chargers that breaks the USB spec is
 	 * identified as invalid by AB8500 and it refuse
 	 * to start the charging process. but by jumping
-	 * thru a few hoops it can be forced to start.
+	 * through a few hoops it can be forced to start.
 	 */
 	if (is_ab8500(di->parent))
 		ret = abx500_get_register_interruptible(di->dev, AB8500_USB,
@@ -3214,7 +3217,7 @@ static int ab8500_charger_resume(struct platform_device *pdev)
 
 	/*
 	 * For ABB revision 1.0 and 1.1 there is a bug in the watchdog
-	 * logic. That means we have to continously kick the charger
+	 * logic. That means we have to continuously kick the charger
 	 * watchdog even when no charger is connected. This is only
 	 * valid once the AC charger has been enabled. This is
 	 * a bug that is not handled by the algorithm and the
@@ -3483,7 +3486,7 @@ static int ab8500_charger_probe(struct platform_device *pdev)
 
 	/*
 	 * For ABB revision 1.0 and 1.1 there is a bug in the watchdog
-	 * logic. That means we have to continously kick the charger
+	 * logic. That means we have to continuously kick the charger
 	 * watchdog even when no charger is connected. This is only
 	 * valid once the AC charger has been enabled. This is
 	 * a bug that is not handled by the algorithm and the
diff --git a/drivers/power/supply/axp288_charger.c b/drivers/power/supply/axp288_charger.c
index 1bbba6b..cf4c67b 100644
--- a/drivers/power/supply/axp288_charger.c
+++ b/drivers/power/supply/axp288_charger.c
@@ -21,6 +21,7 @@
 #include <linux/property.h>
 #include <linux/mfd/axp20x.h>
 #include <linux/extcon.h>
+#include <linux/dmi.h>
 
 #define PS_STAT_VBUS_TRIGGER		BIT(0)
 #define PS_STAT_BAT_CHRG_DIR		BIT(2)
@@ -545,6 +546,49 @@ static irqreturn_t axp288_charger_irq_thread_handler(int irq, void *dev)
 	return IRQ_HANDLED;
 }
 
+/*
+ * The HP Pavilion x2 10 series comes in a number of variants:
+ * Bay Trail SoC    + AXP288 PMIC, DMI_BOARD_NAME: "815D"
+ * Cherry Trail SoC + AXP288 PMIC, DMI_BOARD_NAME: "813E"
+ * Cherry Trail SoC + TI PMIC,     DMI_BOARD_NAME: "827C" or "82F4"
+ *
+ * The variants with the AXP288 PMIC are all kinds of special:
+ *
+ * 1. All variants use a Type-C connector which the AXP288 does not support, so
+ * when using a Type-C charger it is not recognized. Unlike most AXP288 devices,
+ * this model actually has mostly working ACPI AC / Battery code, the ACPI code
+ * "solves" this by simply setting the input_current_limit to 3A.
+ * There are still some issues with the ACPI code, so we use this native driver,
+ * and to solve the charging not working (500mA is not enough) issue we hardcode
+ * the 3A input_current_limit like the ACPI code does.
+ *
+ * 2. If no charger is connected the machine boots with the vbus-path disabled.
+ * Normally this is done when a 5V boost converter is active to avoid the PMIC
+ * trying to charge from the 5V boost converter's output. This is done when
+ * an OTG host cable is inserted and the ID pin on the micro-B receptacle is
+ * pulled low and the ID pin has an ACPI event handler associated with it
+ * which re-enables the vbus-path when the ID pin is pulled high when the
+ * OTG host cable is removed. The Type-C connector has no ID pin, there is
+ * no ID pin handler and there appears to be no 5V boost converter, so we
+ * end up not charging because the vbus-path is disabled, until we unplug
+ * the charger which automatically clears the vbus-path disable bit and then
+ * on the second plug-in of the adapter we start charging. To solve the not
+ * charging on first charger plugin we unconditionally enable the vbus-path at
+ * probe on this model, which is safe since there is no 5V boost converter.
+ */
+static const struct dmi_system_id axp288_hp_x2_dmi_ids[] = {
+	{
+		/*
+		 * Bay Trail model has "Hewlett-Packard" as sys_vendor, Cherry
+		 * Trail model has "HP", so we only match on product_name.
+		 */
+		.matches = {
+			DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion x2 Detachable"),
+		},
+	},
+	{} /* Terminating entry */
+};
+
 static void axp288_charger_extcon_evt_worker(struct work_struct *work)
 {
 	struct axp288_chrg_info *info =
@@ -568,7 +612,11 @@ static void axp288_charger_extcon_evt_worker(struct work_struct *work)
 	}
 
 	/* Determine cable/charger type */
-	if (extcon_get_state(edev, EXTCON_CHG_USB_SDP) > 0) {
+	if (dmi_check_system(axp288_hp_x2_dmi_ids)) {
+		/* See comment above axp288_hp_x2_dmi_ids declaration */
+		dev_dbg(&info->pdev->dev, "HP X2 with Type-C, setting inlmt to 3A\n");
+		current_limit = 3000000;
+	} else if (extcon_get_state(edev, EXTCON_CHG_USB_SDP) > 0) {
 		dev_dbg(&info->pdev->dev, "USB SDP charger is connected\n");
 		current_limit = 500000;
 	} else if (extcon_get_state(edev, EXTCON_CHG_USB_CDP) > 0) {
@@ -685,6 +733,13 @@ static int charger_init_hw_regs(struct axp288_chrg_info *info)
 		return ret;
 	}
 
+	if (dmi_check_system(axp288_hp_x2_dmi_ids)) {
+		/* See comment above axp288_hp_x2_dmi_ids declaration */
+		ret = axp288_charger_vbus_path_select(info, true);
+		if (ret < 0)
+			return ret;
+	}
+
 	/* Read current charge voltage and current limit */
 	ret = regmap_read(info->regmap, AXP20X_CHRG_CTRL1, &val);
 	if (ret < 0) {
diff --git a/drivers/power/supply/axp288_fuel_gauge.c b/drivers/power/supply/axp288_fuel_gauge.c
index e1bc4e6..f40fa0e 100644
--- a/drivers/power/supply/axp288_fuel_gauge.c
+++ b/drivers/power/supply/axp288_fuel_gauge.c
@@ -706,14 +706,14 @@ static const struct dmi_system_id axp288_fuel_gauge_blacklist[] = {
 	{
 		/* Intel Cherry Trail Compute Stick, Windows version */
 		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Intel Corporation"),
+			DMI_MATCH(DMI_SYS_VENDOR, "Intel"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "STK1AW32SC"),
 		},
 	},
 	{
 		/* Intel Cherry Trail Compute Stick, version without an OS */
 		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Intel Corporation"),
+			DMI_MATCH(DMI_SYS_VENDOR, "Intel"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "STK1A32SC"),
 		},
 	},
diff --git a/drivers/power/supply/bq2415x_charger.c b/drivers/power/supply/bq2415x_charger.c
index 532f6e4..a1f00ae 100644
--- a/drivers/power/supply/bq2415x_charger.c
+++ b/drivers/power/supply/bq2415x_charger.c
@@ -2,7 +2,7 @@
 /*
  * bq2415x charger driver
  *
- * Copyright (C) 2011-2013  Pali Rohár <pali.rohar@gmail.com>
+ * Copyright (C) 2011-2013  Pali Rohár <pali@kernel.org>
  *
  * Datasheets:
  * http://www.ti.com/product/bq24150
@@ -1788,6 +1788,6 @@ static struct i2c_driver bq2415x_driver = {
 };
 module_i2c_driver(bq2415x_driver);
 
-MODULE_AUTHOR("Pali Rohár <pali.rohar@gmail.com>");
+MODULE_AUTHOR("Pali Rohár <pali@kernel.org>");
 MODULE_DESCRIPTION("bq2415x charger driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/bq27xxx_battery.c b/drivers/power/supply/bq27xxx_battery.c
index 195c18c..942c921 100644
--- a/drivers/power/supply/bq27xxx_battery.c
+++ b/drivers/power/supply/bq27xxx_battery.c
@@ -4,7 +4,7 @@
  * Copyright (C) 2008 Rodolfo Giometti <giometti@linux.it>
  * Copyright (C) 2008 Eurotech S.p.A. <info@eurotech.it>
  * Copyright (C) 2010-2011 Lars-Peter Clausen <lars@metafoo.de>
- * Copyright (C) 2011 Pali Rohár <pali.rohar@gmail.com>
+ * Copyright (C) 2011 Pali Rohár <pali@kernel.org>
  * Copyright (C) 2017 Liam Breck <kernel@networkimprov.net>
  *
  * Based on a previous work by Copyright (C) 2008 Texas Instruments, Inc.
@@ -1885,7 +1885,10 @@ int bq27xxx_battery_setup(struct bq27xxx_device_info *di)
 
 	di->bat = power_supply_register_no_ws(di->dev, psy_desc, &psy_cfg);
 	if (IS_ERR(di->bat)) {
-		dev_err(di->dev, "failed to register battery\n");
+		if (PTR_ERR(di->bat) == -EPROBE_DEFER)
+			dev_dbg(di->dev, "failed to register battery, deferring probe\n");
+		else
+			dev_err(di->dev, "failed to register battery\n");
 		return PTR_ERR(di->bat);
 	}
 
diff --git a/drivers/power/supply/cros_usbpd-charger.c b/drivers/power/supply/cros_usbpd-charger.c
index 30c3d37..2a45e84 100644
--- a/drivers/power/supply/cros_usbpd-charger.c
+++ b/drivers/power/supply/cros_usbpd-charger.c
@@ -8,6 +8,7 @@
 #include <linux/module.h>
 #include <linux/platform_data/cros_ec_commands.h>
 #include <linux/platform_data/cros_ec_proto.h>
+#include <linux/platform_data/cros_usbpd_notify.h>
 #include <linux/platform_device.h>
 #include <linux/power_supply.h>
 #include <linux/slab.h>
@@ -517,32 +518,21 @@ static int cros_usbpd_charger_property_is_writeable(struct power_supply *psy,
 }
 
 static int cros_usbpd_charger_ec_event(struct notifier_block *nb,
-				       unsigned long queued_during_suspend,
+				       unsigned long host_event,
 				       void *_notify)
 {
-	struct cros_ec_device *ec_device;
-	struct charger_data *charger;
-	u32 host_event;
+	struct charger_data *charger = container_of(nb, struct charger_data,
+						    notifier);
 
-	charger = container_of(nb, struct charger_data, notifier);
-	ec_device = charger->ec_device;
-
-	host_event = cros_ec_get_host_event(ec_device);
-	if (host_event & EC_HOST_EVENT_MASK(EC_HOST_EVENT_PD_MCU)) {
-		cros_usbpd_charger_power_changed(charger->ports[0]->psy);
-		return NOTIFY_OK;
-	} else {
-		return NOTIFY_DONE;
-	}
+	cros_usbpd_charger_power_changed(charger->ports[0]->psy);
+	return NOTIFY_OK;
 }
 
 static void cros_usbpd_charger_unregister_notifier(void *data)
 {
 	struct charger_data *charger = data;
-	struct cros_ec_device *ec_device = charger->ec_device;
 
-	blocking_notifier_chain_unregister(&ec_device->event_notifier,
-					   &charger->notifier);
+	cros_usbpd_unregister_notify(&charger->notifier);
 }
 
 static int cros_usbpd_charger_probe(struct platform_device *pd)
@@ -676,21 +666,17 @@ static int cros_usbpd_charger_probe(struct platform_device *pd)
 		goto fail;
 	}
 
-	if (ec_device->mkbp_event_supported) {
-		/* Get PD events from the EC */
-		charger->notifier.notifier_call = cros_usbpd_charger_ec_event;
-		ret = blocking_notifier_chain_register(
-						&ec_device->event_notifier,
-						&charger->notifier);
-		if (ret < 0) {
-			dev_warn(dev, "failed to register notifier\n");
-		} else {
-			ret = devm_add_action_or_reset(dev,
-					cros_usbpd_charger_unregister_notifier,
-					charger);
-			if (ret < 0)
-				goto fail;
-		}
+	/* Get PD events from the EC */
+	charger->notifier.notifier_call = cros_usbpd_charger_ec_event;
+	ret = cros_usbpd_register_notify(&charger->notifier);
+	if (ret < 0) {
+		dev_warn(dev, "failed to register notifier\n");
+	} else {
+		ret = devm_add_action_or_reset(dev,
+				cros_usbpd_charger_unregister_notifier,
+				charger);
+		if (ret < 0)
+			goto fail;
 	}
 
 	return 0;
diff --git a/drivers/power/supply/ingenic-battery.c b/drivers/power/supply/ingenic-battery.c
index 2748715..dd3d93d 100644
--- a/drivers/power/supply/ingenic-battery.c
+++ b/drivers/power/supply/ingenic-battery.c
@@ -148,7 +148,8 @@ static int ingenic_battery_probe(struct platform_device *pdev)
 
 	bat->battery = devm_power_supply_register(dev, desc, &psy_cfg);
 	if (IS_ERR(bat->battery)) {
-		dev_err(dev, "Unable to register battery\n");
+		if (PTR_ERR(bat->battery) != -EPROBE_DEFER)
+			dev_err(dev, "Unable to register battery\n");
 		return PTR_ERR(bat->battery);
 	}
 
diff --git a/drivers/power/supply/isp1704_charger.c b/drivers/power/supply/isp1704_charger.c
index 4812ac1..b6efc45 100644
--- a/drivers/power/supply/isp1704_charger.c
+++ b/drivers/power/supply/isp1704_charger.c
@@ -3,7 +3,7 @@
  * ISP1704 USB Charger Detection driver
  *
  * Copyright (C) 2010 Nokia Corporation
- * Copyright (C) 2012 - 2013 Pali Rohár <pali.rohar@gmail.com>
+ * Copyright (C) 2012 - 2013 Pali Rohár <pali@kernel.org>
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/power/supply/rx51_battery.c b/drivers/power/supply/rx51_battery.c
index 8548b63..6e488ec 100644
--- a/drivers/power/supply/rx51_battery.c
+++ b/drivers/power/supply/rx51_battery.c
@@ -2,7 +2,7 @@
 /*
  * Nokia RX-51 battery driver
  *
- * Copyright (C) 2012  Pali Rohár <pali.rohar@gmail.com>
+ * Copyright (C) 2012  Pali Rohár <pali@kernel.org>
  */
 
 #include <linux/module.h>
@@ -278,6 +278,6 @@ static struct platform_driver rx51_battery_driver = {
 module_platform_driver(rx51_battery_driver);
 
 MODULE_ALIAS("platform:rx51-battery");
-MODULE_AUTHOR("Pali Rohár <pali.rohar@gmail.com>");
+MODULE_AUTHOR("Pali Rohár <pali@kernel.org>");
 MODULE_DESCRIPTION("Nokia RX-51 battery driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/sc27xx_fuel_gauge.c b/drivers/power/supply/sc27xx_fuel_gauge.c
index 469c83f..a7c8a84 100644
--- a/drivers/power/supply/sc27xx_fuel_gauge.c
+++ b/drivers/power/supply/sc27xx_fuel_gauge.c
@@ -614,6 +614,17 @@ static int sc27xx_fgu_get_property(struct power_supply *psy,
 		val->intval = data->total_cap * 1000;
 		break;
 
+	case POWER_SUPPLY_PROP_CHARGE_NOW:
+		ret = sc27xx_fgu_get_clbcnt(data, &value);
+		if (ret)
+			goto error;
+
+		value = DIV_ROUND_CLOSEST(value * 10,
+					  36 * SC27XX_FGU_SAMPLE_HZ);
+		val->intval = sc27xx_fgu_adc_to_current(data, value);
+
+		break;
+
 	default:
 		ret = -EINVAL;
 		break;
@@ -682,6 +693,7 @@ static enum power_supply_property sc27xx_fgu_props[] = {
 	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
 	POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN,
 	POWER_SUPPLY_PROP_CALIBRATE,
+	POWER_SUPPLY_PROP_CHARGE_NOW
 };
 
 static const struct power_supply_desc sc27xx_fgu_desc = {
diff --git a/drivers/power/supply/twl4030_charger.c b/drivers/power/supply/twl4030_charger.c
index 648ab80..1bc49b2e 100644
--- a/drivers/power/supply/twl4030_charger.c
+++ b/drivers/power/supply/twl4030_charger.c
@@ -726,10 +726,10 @@ twl4030_bci_mode_show(struct device *dev,
 
 	for (i = 0; i < ARRAY_SIZE(modes); i++)
 		if (mode == i)
-			len += snprintf(buf+len, PAGE_SIZE-len,
+			len += scnprintf(buf+len, PAGE_SIZE-len,
 					"[%s] ", modes[i]);
 		else
-			len += snprintf(buf+len, PAGE_SIZE-len,
+			len += scnprintf(buf+len, PAGE_SIZE-len,
 					"%s ", modes[i]);
 	buf[len-1] = '\n';
 	return len;
diff --git a/drivers/ps3/sys-manager-core.c b/drivers/ps3/sys-manager-core.c
index 24709c5..e061b7d0 100644
--- a/drivers/ps3/sys-manager-core.c
+++ b/drivers/ps3/sys-manager-core.c
@@ -31,7 +31,7 @@ void ps3_sys_manager_register_ops(const struct ps3_sys_manager_ops *ops)
 {
 	BUG_ON(!ops);
 	BUG_ON(!ops->dev);
-	ps3_sys_manager_ops = ops ? *ops : ps3_sys_manager_ops;
+	ps3_sys_manager_ops = *ops;
 }
 EXPORT_SYMBOL_GPL(ps3_sys_manager_register_ops);
 
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index 30190be..eebbc91 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -33,6 +33,15 @@
 	bool
 	default y if SYSFS
 
+config PWM_DEBUG
+	bool "PWM lowlevel drivers additional checks and debug messages"
+	depends on DEBUG_KERNEL
+	help
+	  This option enables some additional checks to help lowlevel driver
+	  authors to get their callbacks implemented correctly.
+	  It is expected to introduce some runtime overhead and diagnostic
+	  output to the kernel log, so only enable while working on a driver.
+
 config PWM_AB8500
 	tristate "AB8500 PWM support"
 	depends on AB8500_CORE && ARCH_U8500
@@ -44,7 +53,8 @@
 
 config PWM_ATMEL
 	tristate "Atmel PWM support"
-	depends on ARCH_AT91 && OF
+	depends on OF
+	depends on ARCH_AT91 || COMPILE_TEST
 	help
 	  Generic PWM framework driver for Atmel SoC.
 
@@ -100,7 +110,7 @@
 
 config PWM_BCM2835
 	tristate "BCM2835 PWM support"
-	depends on ARCH_BCM2835 || ARCH_BRCMSTB
+	depends on ARCH_BCM2835 || ARCH_BRCMSTB || COMPILE_TEST
 	help
 	  PWM framework driver for BCM2835 controller (Raspberry Pi)
 
@@ -109,7 +119,7 @@
 
 config PWM_BERLIN
 	tristate "Marvell Berlin PWM support"
-	depends on ARCH_BERLIN
+	depends on ARCH_BERLIN || COMPILE_TEST
 	help
 	  PWM framework driver for Marvell Berlin SoCs.
 
@@ -118,7 +128,7 @@
 
 config PWM_BRCMSTB
 	tristate "Broadcom STB PWM support"
-	depends on ARCH_BRCMSTB || BMIPS_GENERIC
+	depends on ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
 	help
 	  Generic PWM framework driver for the Broadcom Set-top-Box
 	  SoCs (BCM7xxx).
@@ -152,7 +162,7 @@
 
 config PWM_EP93XX
 	tristate "Cirrus Logic EP93xx PWM support"
-	depends on ARCH_EP93XX
+	depends on ARCH_EP93XX || COMPILE_TEST
 	help
 	  Generic PWM framework driver for Cirrus Logic EP93xx.
 
@@ -195,7 +205,7 @@
 
 config PWM_IMX1
 	tristate "i.MX1 PWM support"
-	depends on ARCH_MXC
+	depends on ARCH_MXC || COMPILE_TEST
 	help
 	  Generic PWM framework driver for i.MX1 and i.MX21
 
@@ -204,7 +214,7 @@
 
 config PWM_IMX27
 	tristate "i.MX27 PWM support"
-	depends on ARCH_MXC
+	depends on ARCH_MXC || COMPILE_TEST
 	help
 	  Generic PWM framework driver for i.MX27 and later i.MX SoCs.
 
@@ -225,6 +235,8 @@
 config PWM_JZ4740
 	tristate "Ingenic JZ47xx PWM support"
 	depends on MACH_INGENIC
+	depends on COMMON_CLK
+	select MFD_SYSCON
 	help
 	  Generic PWM framework driver for Ingenic JZ47xx based
 	  machines.
@@ -244,7 +256,7 @@
 
 config PWM_LPC18XX_SCT
 	tristate "LPC18xx/43xx PWM/SCT support"
-	depends on ARCH_LPC18XX
+	depends on ARCH_LPC18XX || COMPILE_TEST
 	help
 	  Generic PWM framework driver for NXP LPC18xx PWM/SCT which
 	  supports 16 channels.
@@ -256,7 +268,7 @@
 
 config PWM_LPC32XX
 	tristate "LPC32XX PWM support"
-	depends on ARCH_LPC32XX
+	depends on ARCH_LPC32XX || COMPILE_TEST
 	help
 	  Generic PWM framework driver for LPC32XX. The LPC32XX SOC has two
 	  PWM controllers.
@@ -289,7 +301,8 @@
 
 config PWM_MESON
 	tristate "Amlogic Meson PWM driver"
-	depends on ARCH_MESON
+	depends on ARCH_MESON || COMPILE_TEST
+	depends on COMMON_CLK
 	help
 	  The platform driver for Amlogic Meson PWM controller.
 
@@ -318,7 +331,8 @@
 
 config PWM_MXS
 	tristate "Freescale MXS PWM support"
-	depends on ARCH_MXS && OF
+	depends on OF
+	depends on ARCH_MXS || COMPILE_TEST
 	select STMP_DEVICE
 	help
 	  Generic PWM framework driver for Freescale MXS.
@@ -357,7 +371,7 @@
 
 config PWM_PXA
 	tristate "PXA PWM support"
-	depends on ARCH_PXA
+	depends on ARCH_PXA || COMPILE_TEST
 	help
 	  Generic PWM framework driver for PXA.
 
@@ -388,14 +402,14 @@
 
 config PWM_ROCKCHIP
 	tristate "Rockchip PWM support"
-	depends on ARCH_ROCKCHIP
+	depends on ARCH_ROCKCHIP || COMPILE_TEST
 	help
 	  Generic PWM framework driver for the PWM controller found on
 	  Rockchip SoCs.
 
 config PWM_SAMSUNG
 	tristate "Samsung PWM support"
-	depends on PLAT_SAMSUNG || ARCH_EXYNOS
+	depends on PLAT_SAMSUNG || ARCH_EXYNOS || COMPILE_TEST
 	help
 	  Generic PWM framework driver for Samsung.
 
@@ -415,7 +429,7 @@
 
 config PWM_SPEAR
 	tristate "STMicroelectronics SPEAr PWM support"
-	depends on PLAT_SPEAR
+	depends on PLAT_SPEAR || COMPILE_TEST
 	depends on OF
 	help
 	  Generic PWM framework driver for the PWM controller on ST
@@ -437,7 +451,7 @@
 
 config PWM_STI
 	tristate "STiH4xx PWM support"
-	depends on ARCH_STI
+	depends on ARCH_STI || COMPILE_TEST
 	depends on OF
 	help
 	  Generic PWM framework driver for STiH4xx SoCs.
@@ -447,7 +461,7 @@
 
 config PWM_STM32
 	tristate "STMicroelectronics STM32 PWM"
-	depends on MFD_STM32_TIMERS
+	depends on MFD_STM32_TIMERS || COMPILE_TEST
 	help
 	  Generic PWM framework driver for STM32 SoCs.
 
@@ -483,7 +497,7 @@
 
 config PWM_TEGRA
 	tristate "NVIDIA Tegra PWM support"
-	depends on ARCH_TEGRA
+	depends on ARCH_TEGRA || COMPILE_TEST
 	help
 	  Generic PWM framework driver for the PWFM controller found on NVIDIA
 	  Tegra SoCs.
@@ -493,7 +507,7 @@
 
 config PWM_TIECAP
 	tristate "ECAP PWM support"
-	depends on ARCH_OMAP2PLUS || ARCH_DAVINCI_DA8XX || ARCH_KEYSTONE || ARCH_K3
+	depends on ARCH_OMAP2PLUS || ARCH_DAVINCI_DA8XX || ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST
 	help
 	  PWM driver support for the ECAP APWM controller found on TI SOCs
 
@@ -502,7 +516,7 @@
 
 config PWM_TIEHRPWM
 	tristate "EHRPWM PWM support"
-	depends on ARCH_OMAP2PLUS || ARCH_DAVINCI_DA8XX || ARCH_K3
+	depends on ARCH_OMAP2PLUS || ARCH_DAVINCI_DA8XX || ARCH_K3 || COMPILE_TEST
 	help
 	  PWM driver support for the EHRPWM controller found on TI SOCs
 
@@ -529,7 +543,7 @@
 
 config PWM_VT8500
 	tristate "vt8500 PWM support"
-	depends on ARCH_VT8500
+	depends on ARCH_VT8500 || COMPILE_TEST
 	help
 	  Generic PWM framework driver for vt8500.
 
@@ -538,7 +552,7 @@
 
 config PWM_ZX
 	tristate "ZTE ZX PWM support"
-	depends on ARCH_ZX
+	depends on ARCH_ZX || COMPILE_TEST
 	help
 	  Generic PWM framework driver for ZTE ZX family SoCs.
 
diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c
index 5a7f659..9973c44 100644
--- a/drivers/pwm/core.c
+++ b/drivers/pwm/core.c
@@ -120,6 +120,9 @@ static int pwm_device_request(struct pwm_device *pwm, const char *label)
 	if (pwm->chip->ops->get_state) {
 		pwm->chip->ops->get_state(pwm->chip, pwm, &pwm->state);
 		trace_pwm_get(pwm, &pwm->state);
+
+		if (IS_ENABLED(PWM_DEBUG))
+			pwm->last = pwm->state;
 	}
 
 	set_bit(PWMF_REQUESTED, &pwm->flags);
@@ -232,17 +235,28 @@ void *pwm_get_chip_data(struct pwm_device *pwm)
 }
 EXPORT_SYMBOL_GPL(pwm_get_chip_data);
 
-static bool pwm_ops_check(const struct pwm_ops *ops)
+static bool pwm_ops_check(const struct pwm_chip *chip)
 {
+
+	const struct pwm_ops *ops = chip->ops;
+
 	/* driver supports legacy, non-atomic operation */
-	if (ops->config && ops->enable && ops->disable)
-		return true;
+	if (ops->config && ops->enable && ops->disable) {
+		if (IS_ENABLED(CONFIG_PWM_DEBUG))
+			dev_warn(chip->dev,
+				 "Driver needs updating to atomic API\n");
 
-	/* driver supports atomic operation */
-	if (ops->apply)
 		return true;
+	}
 
-	return false;
+	if (!ops->apply)
+		return false;
+
+	if (IS_ENABLED(CONFIG_PWM_DEBUG) && !ops->get_state)
+		dev_warn(chip->dev,
+			 "Please implement the .get_state() callback\n");
+
+	return true;
 }
 
 /**
@@ -266,7 +280,7 @@ int pwmchip_add_with_polarity(struct pwm_chip *chip,
 	if (!chip || !chip->dev || !chip->ops || !chip->npwm)
 		return -EINVAL;
 
-	if (!pwm_ops_check(chip->ops))
+	if (!pwm_ops_check(chip))
 		return -EINVAL;
 
 	mutex_lock(&pwm_lock);
@@ -450,6 +464,107 @@ void pwm_free(struct pwm_device *pwm)
 }
 EXPORT_SYMBOL_GPL(pwm_free);
 
+static void pwm_apply_state_debug(struct pwm_device *pwm,
+				  const struct pwm_state *state)
+{
+	struct pwm_state *last = &pwm->last;
+	struct pwm_chip *chip = pwm->chip;
+	struct pwm_state s1, s2;
+	int err;
+
+	if (!IS_ENABLED(CONFIG_PWM_DEBUG))
+		return;
+
+	/* No reasonable diagnosis possible without .get_state() */
+	if (!chip->ops->get_state)
+		return;
+
+	/*
+	 * *state was just applied. Read out the hardware state and do some
+	 * checks.
+	 */
+
+	chip->ops->get_state(chip, pwm, &s1);
+	trace_pwm_get(pwm, &s1);
+
+	/*
+	 * The lowlevel driver either ignored .polarity (which is a bug) or as
+	 * best effort inverted .polarity and fixed .duty_cycle respectively.
+	 * Undo this inversion and fixup for further tests.
+	 */
+	if (s1.enabled && s1.polarity != state->polarity) {
+		s2.polarity = state->polarity;
+		s2.duty_cycle = s1.period - s1.duty_cycle;
+		s2.period = s1.period;
+		s2.enabled = s1.enabled;
+	} else {
+		s2 = s1;
+	}
+
+	if (s2.polarity != state->polarity &&
+	    state->duty_cycle < state->period)
+		dev_warn(chip->dev, ".apply ignored .polarity\n");
+
+	if (state->enabled &&
+	    last->polarity == state->polarity &&
+	    last->period > s2.period &&
+	    last->period <= state->period)
+		dev_warn(chip->dev,
+			 ".apply didn't pick the best available period (requested: %u, applied: %u, possible: %u)\n",
+			 state->period, s2.period, last->period);
+
+	if (state->enabled && state->period < s2.period)
+		dev_warn(chip->dev,
+			 ".apply is supposed to round down period (requested: %u, applied: %u)\n",
+			 state->period, s2.period);
+
+	if (state->enabled &&
+	    last->polarity == state->polarity &&
+	    last->period == s2.period &&
+	    last->duty_cycle > s2.duty_cycle &&
+	    last->duty_cycle <= state->duty_cycle)
+		dev_warn(chip->dev,
+			 ".apply didn't pick the best available duty cycle (requested: %u/%u, applied: %u/%u, possible: %u/%u)\n",
+			 state->duty_cycle, state->period,
+			 s2.duty_cycle, s2.period,
+			 last->duty_cycle, last->period);
+
+	if (state->enabled && state->duty_cycle < s2.duty_cycle)
+		dev_warn(chip->dev,
+			 ".apply is supposed to round down duty_cycle (requested: %u/%u, applied: %u/%u)\n",
+			 state->duty_cycle, state->period,
+			 s2.duty_cycle, s2.period);
+
+	if (!state->enabled && s2.enabled && s2.duty_cycle > 0)
+		dev_warn(chip->dev,
+			 "requested disabled, but yielded enabled with duty > 0");
+
+	/* reapply the state that the driver reported being configured. */
+	err = chip->ops->apply(chip, pwm, &s1);
+	if (err) {
+		*last = s1;
+		dev_err(chip->dev, "failed to reapply current setting\n");
+		return;
+	}
+
+	trace_pwm_apply(pwm, &s1);
+
+	chip->ops->get_state(chip, pwm, last);
+	trace_pwm_get(pwm, last);
+
+	/* reapplication of the current state should give an exact match */
+	if (s1.enabled != last->enabled ||
+	    s1.polarity != last->polarity ||
+	    (s1.enabled && s1.period != last->period) ||
+	    (s1.enabled && s1.duty_cycle != last->duty_cycle)) {
+		dev_err(chip->dev,
+			".apply is not idempotent (ena=%d pol=%d %u/%u) -> (ena=%d pol=%d %u/%u)\n",
+			s1.enabled, s1.polarity, s1.duty_cycle, s1.period,
+			last->enabled, last->polarity, last->duty_cycle,
+			last->period);
+	}
+}
+
 /**
  * pwm_apply_state() - atomically apply a new state to a PWM device
  * @pwm: PWM device
@@ -480,6 +595,12 @@ int pwm_apply_state(struct pwm_device *pwm, const struct pwm_state *state)
 		trace_pwm_apply(pwm, state);
 
 		pwm->state = *state;
+
+		/*
+		 * only do this after pwm->state was applied as some
+		 * implementations of .get_state depend on this
+		 */
+		pwm_apply_state_debug(pwm, state);
 	} else {
 		/*
 		 * FIXME: restore the initial state in case of error.
diff --git a/drivers/pwm/pwm-bcm2835.c b/drivers/pwm/pwm-bcm2835.c
index 91e24f0..d78f86f 100644
--- a/drivers/pwm/pwm-bcm2835.c
+++ b/drivers/pwm/pwm-bcm2835.c
@@ -166,6 +166,7 @@ static int bcm2835_pwm_probe(struct platform_device *pdev)
 
 	pc->chip.dev = &pdev->dev;
 	pc->chip.ops = &bcm2835_pwm_ops;
+	pc->chip.base = -1;
 	pc->chip.npwm = 2;
 	pc->chip.of_xlate = of_pwm_xlate_with_flags;
 	pc->chip.of_pwm_n_cells = 3;
diff --git a/drivers/pwm/pwm-imx-tpm.c b/drivers/pwm/pwm-imx-tpm.c
index 9145f61..5f3d7f7 100644
--- a/drivers/pwm/pwm-imx-tpm.c
+++ b/drivers/pwm/pwm-imx-tpm.c
@@ -18,10 +18,8 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/io.h>
-#include <linux/log2.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/of_address.h>
 #include <linux/platform_device.h>
 #include <linux/pwm.h>
 #include <linux/slab.h>
diff --git a/drivers/pwm/pwm-imx27.c b/drivers/pwm/pwm-imx27.c
index 35a7ac42..a6e40d4 100644
--- a/drivers/pwm/pwm-imx27.c
+++ b/drivers/pwm/pwm-imx27.c
@@ -18,7 +18,6 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/pwm.h>
 #include <linux/slab.h>
@@ -96,9 +95,8 @@ struct pwm_imx27_chip {
 
 #define to_pwm_imx27_chip(chip)	container_of(chip, struct pwm_imx27_chip, chip)
 
-static int pwm_imx27_clk_prepare_enable(struct pwm_chip *chip)
+static int pwm_imx27_clk_prepare_enable(struct pwm_imx27_chip *imx)
 {
-	struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
 	int ret;
 
 	ret = clk_prepare_enable(imx->clk_ipg);
@@ -114,10 +112,8 @@ static int pwm_imx27_clk_prepare_enable(struct pwm_chip *chip)
 	return 0;
 }
 
-static void pwm_imx27_clk_disable_unprepare(struct pwm_chip *chip)
+static void pwm_imx27_clk_disable_unprepare(struct pwm_imx27_chip *imx)
 {
-	struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
-
 	clk_disable_unprepare(imx->clk_per);
 	clk_disable_unprepare(imx->clk_ipg);
 }
@@ -130,7 +126,7 @@ static void pwm_imx27_get_state(struct pwm_chip *chip,
 	u64 tmp;
 	int ret;
 
-	ret = pwm_imx27_clk_prepare_enable(chip);
+	ret = pwm_imx27_clk_prepare_enable(imx);
 	if (ret < 0)
 		return;
 
@@ -174,8 +170,7 @@ static void pwm_imx27_get_state(struct pwm_chip *chip,
 	tmp = NSEC_PER_SEC * (u64)(val);
 	state->duty_cycle = DIV_ROUND_CLOSEST_ULL(tmp, pwm_clk);
 
-	if (!state->enabled)
-		pwm_imx27_clk_disable_unprepare(chip);
+	pwm_imx27_clk_disable_unprepare(imx);
 }
 
 static void pwm_imx27_sw_reset(struct pwm_chip *chip)
@@ -259,7 +254,7 @@ static int pwm_imx27_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	if (cstate.enabled) {
 		pwm_imx27_wait_fifo_slot(chip, pwm);
 	} else {
-		ret = pwm_imx27_clk_prepare_enable(chip);
+		ret = pwm_imx27_clk_prepare_enable(imx);
 		if (ret)
 			return ret;
 
@@ -289,8 +284,8 @@ static int pwm_imx27_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 
 	writel(cr, imx->mmio_base + MX3_PWMCR);
 
-	if (!state->enabled && cstate.enabled)
-		pwm_imx27_clk_disable_unprepare(chip);
+	if (!state->enabled)
+		pwm_imx27_clk_disable_unprepare(imx);
 
 	return 0;
 }
@@ -310,6 +305,8 @@ MODULE_DEVICE_TABLE(of, pwm_imx27_dt_ids);
 static int pwm_imx27_probe(struct platform_device *pdev)
 {
 	struct pwm_imx27_chip *imx;
+	int ret;
+	u32 pwmcr;
 
 	imx = devm_kzalloc(&pdev->dev, sizeof(*imx), GFP_KERNEL);
 	if (imx == NULL)
@@ -352,6 +349,15 @@ static int pwm_imx27_probe(struct platform_device *pdev)
 	if (IS_ERR(imx->mmio_base))
 		return PTR_ERR(imx->mmio_base);
 
+	ret = pwm_imx27_clk_prepare_enable(imx);
+	if (ret)
+		return ret;
+
+	/* keep clks on if pwm is running */
+	pwmcr = readl(imx->mmio_base + MX3_PWMCR);
+	if (!(pwmcr & MX3_PWMCR_EN))
+		pwm_imx27_clk_disable_unprepare(imx);
+
 	return pwmchip_add(&imx->chip);
 }
 
@@ -361,8 +367,6 @@ static int pwm_imx27_remove(struct platform_device *pdev)
 
 	imx = platform_get_drvdata(pdev);
 
-	pwm_imx27_clk_disable_unprepare(&imx->chip);
-
 	return pwmchip_remove(&imx->chip);
 }
 
diff --git a/drivers/pwm/pwm-jz4740.c b/drivers/pwm/pwm-jz4740.c
index 9d78cc2..3cd5c05 100644
--- a/drivers/pwm/pwm-jz4740.c
+++ b/drivers/pwm/pwm-jz4740.c
@@ -13,18 +13,19 @@
 #include <linux/err.h>
 #include <linux/gpio.h>
 #include <linux/kernel.h>
+#include <linux/mfd/ingenic-tcu.h>
+#include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/pwm.h>
-
-#include <asm/mach-jz4740/timer.h>
+#include <linux/regmap.h>
 
 #define NUM_PWM 8
 
 struct jz4740_pwm_chip {
 	struct pwm_chip chip;
-	struct clk *clk;
+	struct regmap *map;
 };
 
 static inline struct jz4740_pwm_chip *to_jz4740(struct pwm_chip *chip)
@@ -32,82 +33,134 @@ static inline struct jz4740_pwm_chip *to_jz4740(struct pwm_chip *chip)
 	return container_of(chip, struct jz4740_pwm_chip, chip);
 }
 
+static bool jz4740_pwm_can_use_chn(struct jz4740_pwm_chip *jz,
+				   unsigned int channel)
+{
+	/* Enable all TCU channels for PWM use by default except channels 0/1 */
+	u32 pwm_channels_mask = GENMASK(NUM_PWM - 1, 2);
+
+	device_property_read_u32(jz->chip.dev->parent,
+				 "ingenic,pwm-channels-mask",
+				 &pwm_channels_mask);
+
+	return !!(pwm_channels_mask & BIT(channel));
+}
+
 static int jz4740_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
 {
-	/*
-	 * Timers 0 and 1 are used for system tasks, so they are unavailable
-	 * for use as PWMs.
-	 */
-	if (pwm->hwpwm < 2)
+	struct jz4740_pwm_chip *jz = to_jz4740(chip);
+	struct clk *clk;
+	char name[16];
+	int err;
+
+	if (!jz4740_pwm_can_use_chn(jz, pwm->hwpwm))
 		return -EBUSY;
 
-	jz4740_timer_start(pwm->hwpwm);
+	snprintf(name, sizeof(name), "timer%u", pwm->hwpwm);
+
+	clk = clk_get(chip->dev, name);
+	if (IS_ERR(clk)) {
+		if (PTR_ERR(clk) != -EPROBE_DEFER)
+			dev_err(chip->dev, "Failed to get clock: %pe", clk);
+
+		return PTR_ERR(clk);
+	}
+
+	err = clk_prepare_enable(clk);
+	if (err < 0) {
+		clk_put(clk);
+		return err;
+	}
+
+	pwm_set_chip_data(pwm, clk);
 
 	return 0;
 }
 
 static void jz4740_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
 {
-	jz4740_timer_set_ctrl(pwm->hwpwm, 0);
+	struct clk *clk = pwm_get_chip_data(pwm);
 
-	jz4740_timer_stop(pwm->hwpwm);
+	clk_disable_unprepare(clk);
+	clk_put(clk);
 }
 
 static int jz4740_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
 {
-	uint32_t ctrl = jz4740_timer_get_ctrl(pwm->pwm);
+	struct jz4740_pwm_chip *jz = to_jz4740(chip);
 
-	ctrl |= JZ_TIMER_CTRL_PWM_ENABLE;
-	jz4740_timer_set_ctrl(pwm->hwpwm, ctrl);
-	jz4740_timer_enable(pwm->hwpwm);
+	/* Enable PWM output */
+	regmap_update_bits(jz->map, TCU_REG_TCSRc(pwm->hwpwm),
+			   TCU_TCSR_PWM_EN, TCU_TCSR_PWM_EN);
+
+	/* Start counter */
+	regmap_write(jz->map, TCU_REG_TESR, BIT(pwm->hwpwm));
 
 	return 0;
 }
 
 static void jz4740_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
 {
-	uint32_t ctrl = jz4740_timer_get_ctrl(pwm->hwpwm);
+	struct jz4740_pwm_chip *jz = to_jz4740(chip);
 
 	/*
 	 * Set duty > period. This trick allows the TCU channels in TCU2 mode to
 	 * properly return to their init level.
 	 */
-	jz4740_timer_set_duty(pwm->hwpwm, 0xffff);
-	jz4740_timer_set_period(pwm->hwpwm, 0x0);
+	regmap_write(jz->map, TCU_REG_TDHRc(pwm->hwpwm), 0xffff);
+	regmap_write(jz->map, TCU_REG_TDFRc(pwm->hwpwm), 0x0);
 
 	/*
 	 * Disable PWM output.
 	 * In TCU2 mode (channel 1/2 on JZ4750+), this must be done before the
 	 * counter is stopped, while in TCU1 mode the order does not matter.
 	 */
-	ctrl &= ~JZ_TIMER_CTRL_PWM_ENABLE;
-	jz4740_timer_set_ctrl(pwm->hwpwm, ctrl);
+	regmap_update_bits(jz->map, TCU_REG_TCSRc(pwm->hwpwm),
+			   TCU_TCSR_PWM_EN, 0);
 
 	/* Stop counter */
-	jz4740_timer_disable(pwm->hwpwm);
+	regmap_write(jz->map, TCU_REG_TECR, BIT(pwm->hwpwm));
 }
 
 static int jz4740_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 			    const struct pwm_state *state)
 {
 	struct jz4740_pwm_chip *jz4740 = to_jz4740(pwm->chip);
-	unsigned long long tmp;
+	unsigned long long tmp = 0xffffull * NSEC_PER_SEC;
+	struct clk *clk = pwm_get_chip_data(pwm);
 	unsigned long period, duty;
-	unsigned int prescaler = 0;
-	uint16_t ctrl;
+	long rate;
+	int err;
 
-	tmp = (unsigned long long)clk_get_rate(jz4740->clk) * state->period;
-	do_div(tmp, 1000000000);
-	period = tmp;
+	/*
+	 * Limit the clock to a maximum rate that still gives us a period value
+	 * which fits in 16 bits.
+	 */
+	do_div(tmp, state->period);
 
-	while (period > 0xffff && prescaler < 6) {
-		period >>= 2;
-		++prescaler;
+	/*
+	 * /!\ IMPORTANT NOTE:
+	 * -------------------
+	 * This code relies on the fact that clk_round_rate() will always round
+	 * down, which is not a valid assumption given by the clk API, but only
+	 * happens to be true with the clk drivers used for Ingenic SoCs.
+	 *
+	 * Right now, there is no alternative as the clk API does not have a
+	 * round-down function (and won't have one for a while), but if it ever
+	 * comes to light, a round-down function should be used instead.
+	 */
+	rate = clk_round_rate(clk, tmp);
+	if (rate < 0) {
+		dev_err(chip->dev, "Unable to round rate: %ld", rate);
+		return rate;
 	}
 
-	if (prescaler == 6)
-		return -EINVAL;
+	/* Calculate period value */
+	tmp = (unsigned long long)rate * state->period;
+	do_div(tmp, NSEC_PER_SEC);
+	period = (unsigned long)tmp;
 
+	/* Calculate duty value */
 	tmp = (unsigned long long)period * state->duty_cycle;
 	do_div(tmp, state->period);
 	duty = period - tmp;
@@ -117,25 +170,37 @@ static int jz4740_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 
 	jz4740_pwm_disable(chip, pwm);
 
-	jz4740_timer_set_count(pwm->hwpwm, 0);
-	jz4740_timer_set_duty(pwm->hwpwm, duty);
-	jz4740_timer_set_period(pwm->hwpwm, period);
-
-	ctrl = JZ_TIMER_CTRL_PRESCALER(prescaler) | JZ_TIMER_CTRL_SRC_EXT |
-		JZ_TIMER_CTRL_PWM_ABBRUPT_SHUTDOWN;
-
-	jz4740_timer_set_ctrl(pwm->hwpwm, ctrl);
-
-	switch (state->polarity) {
-	case PWM_POLARITY_NORMAL:
-		ctrl &= ~JZ_TIMER_CTRL_PWM_ACTIVE_LOW;
-		break;
-	case PWM_POLARITY_INVERSED:
-		ctrl |= JZ_TIMER_CTRL_PWM_ACTIVE_LOW;
-		break;
+	err = clk_set_rate(clk, rate);
+	if (err) {
+		dev_err(chip->dev, "Unable to set rate: %d", err);
+		return err;
 	}
 
-	jz4740_timer_set_ctrl(pwm->hwpwm, ctrl);
+	/* Reset counter to 0 */
+	regmap_write(jz4740->map, TCU_REG_TCNTc(pwm->hwpwm), 0);
+
+	/* Set duty */
+	regmap_write(jz4740->map, TCU_REG_TDHRc(pwm->hwpwm), duty);
+
+	/* Set period */
+	regmap_write(jz4740->map, TCU_REG_TDFRc(pwm->hwpwm), period);
+
+	/* Set abrupt shutdown */
+	regmap_update_bits(jz4740->map, TCU_REG_TCSRc(pwm->hwpwm),
+			   TCU_TCSR_PWM_SD, TCU_TCSR_PWM_SD);
+
+	/* Set polarity */
+	switch (state->polarity) {
+	case PWM_POLARITY_NORMAL:
+		regmap_update_bits(jz4740->map, TCU_REG_TCSRc(pwm->hwpwm),
+				   TCU_TCSR_PWM_INITL_HIGH, 0);
+		break;
+	case PWM_POLARITY_INVERSED:
+		regmap_update_bits(jz4740->map, TCU_REG_TCSRc(pwm->hwpwm),
+				   TCU_TCSR_PWM_INITL_HIGH,
+				   TCU_TCSR_PWM_INITL_HIGH);
+		break;
+	}
 
 	if (state->enabled)
 		jz4740_pwm_enable(chip, pwm);
@@ -152,17 +217,20 @@ static const struct pwm_ops jz4740_pwm_ops = {
 
 static int jz4740_pwm_probe(struct platform_device *pdev)
 {
+	struct device *dev = &pdev->dev;
 	struct jz4740_pwm_chip *jz4740;
 
-	jz4740 = devm_kzalloc(&pdev->dev, sizeof(*jz4740), GFP_KERNEL);
+	jz4740 = devm_kzalloc(dev, sizeof(*jz4740), GFP_KERNEL);
 	if (!jz4740)
 		return -ENOMEM;
 
-	jz4740->clk = devm_clk_get(&pdev->dev, "ext");
-	if (IS_ERR(jz4740->clk))
-		return PTR_ERR(jz4740->clk);
+	jz4740->map = device_node_to_regmap(dev->parent->of_node);
+	if (IS_ERR(jz4740->map)) {
+		dev_err(dev, "regmap not found: %ld\n", PTR_ERR(jz4740->map));
+		return PTR_ERR(jz4740->map);
+	}
 
-	jz4740->chip.dev = &pdev->dev;
+	jz4740->chip.dev = dev;
 	jz4740->chip.ops = &jz4740_pwm_ops;
 	jz4740->chip.npwm = NUM_PWM;
 	jz4740->chip.base = -1;
diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c
index 6245bbd..bd0d733 100644
--- a/drivers/pwm/pwm-meson.c
+++ b/drivers/pwm/pwm-meson.c
@@ -136,7 +136,7 @@ static int meson_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
 			dev_err(dev, "failed to set parent %s for %s: %d\n",
 				__clk_get_name(channel->clk_parent),
 				__clk_get_name(channel->clk), err);
-				return err;
+			return err;
 		}
 	}
 
@@ -163,7 +163,7 @@ static int meson_pwm_calc(struct meson_pwm *meson, struct pwm_device *pwm,
 {
 	struct meson_pwm_channel *channel = pwm_get_chip_data(pwm);
 	unsigned int duty, period, pre_div, cnt, duty_cnt;
-	unsigned long fin_freq = -1;
+	unsigned long fin_freq;
 
 	duty = state->duty_cycle;
 	period = state->period;
diff --git a/drivers/pwm/pwm-mxs.c b/drivers/pwm/pwm-mxs.c
index f2e57fc..7ce6169 100644
--- a/drivers/pwm/pwm-mxs.c
+++ b/drivers/pwm/pwm-mxs.c
@@ -9,7 +9,6 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/of_address.h>
 #include <linux/platform_device.h>
 #include <linux/pwm.h>
 #include <linux/slab.h>
diff --git a/drivers/pwm/pwm-omap-dmtimer.c b/drivers/pwm/pwm-omap-dmtimer.c
index 9e4378d..0d31833 100644
--- a/drivers/pwm/pwm-omap-dmtimer.c
+++ b/drivers/pwm/pwm-omap-dmtimer.c
@@ -10,7 +10,27 @@
  *
  * Description:
  *   This file is the core OMAP support for the generic, Linux
- *   PWM driver / controller, using the OMAP's dual-mode timers.
+ *   PWM driver / controller, using the OMAP's dual-mode timers
+ *   with a timer counter that goes up. When it overflows it gets
+ *   reloaded with the load value and the pwm output goes up.
+ *   When counter matches with match register, the output goes down.
+ *   Reference Manual: http://www.ti.com/lit/ug/spruh73q/spruh73q.pdf
+ *
+ * Limitations:
+ * - When PWM is stopped, timer counter gets stopped immediately. This
+ *   doesn't allow the current PWM period to complete and stops abruptly.
+ * - When PWM is running and changing both duty cycle and period,
+ *   we cannot prevent in software that the output might produce
+ *   a period with mixed settings. Especially when period/duty_cyle
+ *   is updated while the pwm pin is high, current pwm period/duty_cycle
+ *   can get updated as below based on the current timer counter:
+ *   	- period for current cycle =  current_period + new period
+ *   	- duty_cycle for current period = current period + new duty_cycle.
+ * - PWM OMAP DM timer cannot change the polarity when pwm is active. When
+ *   user requests a change in polarity when in active state:
+ *	- PWM is stopped abruptly(without completing the current cycle)
+ *	- Polarity is changed
+ *	- A fresh cycle is started.
  */
 
 #include <linux/clk.h>
@@ -20,8 +40,8 @@
 #include <linux/mutex.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
+#include <clocksource/timer-ti-dm.h>
 #include <linux/platform_data/dmtimer-omap.h>
-#include <linux/platform_data/pwm_omap_dmtimer.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/pwm.h>
@@ -31,10 +51,20 @@
 #define DM_TIMER_LOAD_MIN 0xfffffffe
 #define DM_TIMER_MAX      0xffffffff
 
+/**
+ * struct pwm_omap_dmtimer_chip - Structure representing a pwm chip
+ *				  corresponding to omap dmtimer.
+ * @chip:		PWM chip structure representing PWM controller
+ * @mutex:		Mutex to protect pwm apply state
+ * @dm_timer:		Pointer to omap dm timer.
+ * @pdata:		Pointer to omap dm timer ops.
+ * dm_timer_pdev:	Pointer to omap dm timer platform device
+ */
 struct pwm_omap_dmtimer_chip {
 	struct pwm_chip chip;
+	/* Mutex to protect pwm apply state */
 	struct mutex mutex;
-	pwm_omap_dmtimer *dm_timer;
+	struct omap_dm_timer *dm_timer;
 	const struct omap_dm_timer_ops *pdata;
 	struct platform_device *dm_timer_pdev;
 };
@@ -45,11 +75,22 @@ to_pwm_omap_dmtimer_chip(struct pwm_chip *chip)
 	return container_of(chip, struct pwm_omap_dmtimer_chip, chip);
 }
 
+/**
+ * pwm_omap_dmtimer_get_clock_cycles() - Get clock cycles in a time frame
+ * @clk_rate:	pwm timer clock rate
+ * @ns:		time frame in nano seconds.
+ *
+ * Return number of clock cycles in a given period(ins ns).
+ */
 static u32 pwm_omap_dmtimer_get_clock_cycles(unsigned long clk_rate, int ns)
 {
 	return DIV_ROUND_CLOSEST_ULL((u64)clk_rate * ns, NSEC_PER_SEC);
 }
 
+/**
+ * pwm_omap_dmtimer_start() - Start the pwm omap dm timer in pwm mode
+ * @omap:	Pointer to pwm omap dm timer chip
+ */
 static void pwm_omap_dmtimer_start(struct pwm_omap_dmtimer_chip *omap)
 {
 	/*
@@ -67,28 +108,46 @@ static void pwm_omap_dmtimer_start(struct pwm_omap_dmtimer_chip *omap)
 	omap->pdata->start(omap->dm_timer);
 }
 
-static int pwm_omap_dmtimer_enable(struct pwm_chip *chip,
-				   struct pwm_device *pwm)
+/**
+ * pwm_omap_dmtimer_is_enabled() -  Detect if the pwm is enabled.
+ * @omap:	Pointer to pwm omap dm timer chip
+ *
+ * Return true if pwm is enabled else false.
+ */
+static bool pwm_omap_dmtimer_is_enabled(struct pwm_omap_dmtimer_chip *omap)
 {
-	struct pwm_omap_dmtimer_chip *omap = to_pwm_omap_dmtimer_chip(chip);
+	u32 status;
 
-	mutex_lock(&omap->mutex);
-	pwm_omap_dmtimer_start(omap);
-	mutex_unlock(&omap->mutex);
+	status = omap->pdata->get_pwm_status(omap->dm_timer);
 
-	return 0;
+	return !!(status & OMAP_TIMER_CTRL_ST);
 }
 
-static void pwm_omap_dmtimer_disable(struct pwm_chip *chip,
-				     struct pwm_device *pwm)
+/**
+ * pwm_omap_dmtimer_polarity() -  Detect the polarity of pwm.
+ * @omap:	Pointer to pwm omap dm timer chip
+ *
+ * Return the polarity of pwm.
+ */
+static int pwm_omap_dmtimer_polarity(struct pwm_omap_dmtimer_chip *omap)
 {
-	struct pwm_omap_dmtimer_chip *omap = to_pwm_omap_dmtimer_chip(chip);
+	u32 status;
 
-	mutex_lock(&omap->mutex);
-	omap->pdata->stop(omap->dm_timer);
-	mutex_unlock(&omap->mutex);
+	status = omap->pdata->get_pwm_status(omap->dm_timer);
+
+	return !!(status & OMAP_TIMER_CTRL_SCPWM);
 }
 
+/**
+ * pwm_omap_dmtimer_config() - Update the configuration of pwm omap dm timer
+ * @chip:	Pointer to PWM controller
+ * @pwm:	Pointer to PWM channel
+ * @duty_ns:	New duty cycle in nano seconds
+ * @period_ns:	New period in nano seconds
+ *
+ * Return 0 if successfully changed the period/duty_cycle else appropriate
+ * error.
+ */
 static int pwm_omap_dmtimer_config(struct pwm_chip *chip,
 				   struct pwm_device *pwm,
 				   int duty_ns, int period_ns)
@@ -96,31 +155,26 @@ static int pwm_omap_dmtimer_config(struct pwm_chip *chip,
 	struct pwm_omap_dmtimer_chip *omap = to_pwm_omap_dmtimer_chip(chip);
 	u32 period_cycles, duty_cycles;
 	u32 load_value, match_value;
-	struct clk *fclk;
 	unsigned long clk_rate;
-	bool timer_active;
+	struct clk *fclk;
 
 	dev_dbg(chip->dev, "requested duty cycle: %d ns, period: %d ns\n",
 		duty_ns, period_ns);
 
-	mutex_lock(&omap->mutex);
 	if (duty_ns == pwm_get_duty_cycle(pwm) &&
-	    period_ns == pwm_get_period(pwm)) {
-		/* No change - don't cause any transients. */
-		mutex_unlock(&omap->mutex);
+	    period_ns == pwm_get_period(pwm))
 		return 0;
-	}
 
 	fclk = omap->pdata->get_fclk(omap->dm_timer);
 	if (!fclk) {
 		dev_err(chip->dev, "invalid pmtimer fclk\n");
-		goto err_einval;
+		return -EINVAL;
 	}
 
 	clk_rate = clk_get_rate(fclk);
 	if (!clk_rate) {
 		dev_err(chip->dev, "invalid pmtimer fclk rate\n");
-		goto err_einval;
+		return -EINVAL;
 	}
 
 	dev_dbg(chip->dev, "clk rate: %luHz\n", clk_rate);
@@ -148,7 +202,7 @@ static int pwm_omap_dmtimer_config(struct pwm_chip *chip,
 		dev_info(chip->dev,
 			 "period %d ns too short for clock rate %lu Hz\n",
 			 period_ns, clk_rate);
-		goto err_einval;
+		return -EINVAL;
 	}
 
 	if (duty_cycles < 1) {
@@ -174,81 +228,103 @@ static int pwm_omap_dmtimer_config(struct pwm_chip *chip,
 	load_value = (DM_TIMER_MAX - period_cycles) + 1;
 	match_value = load_value + duty_cycles - 1;
 
-	/*
-	 * We MUST stop the associated dual-mode timer before attempting to
-	 * write its registers, but calls to omap_dm_timer_start/stop must
-	 * be balanced so check if timer is active before calling timer_stop.
-	 */
-	timer_active = pm_runtime_active(&omap->dm_timer_pdev->dev);
-	if (timer_active)
-		omap->pdata->stop(omap->dm_timer);
-
 	omap->pdata->set_load(omap->dm_timer, load_value);
 	omap->pdata->set_match(omap->dm_timer, true, match_value);
 
 	dev_dbg(chip->dev, "load value: %#08x (%d), match value: %#08x (%d)\n",
 		load_value, load_value,	match_value, match_value);
 
-	omap->pdata->set_pwm(omap->dm_timer,
-			      pwm_get_polarity(pwm) == PWM_POLARITY_INVERSED,
-			      true,
-			      PWM_OMAP_DMTIMER_TRIGGER_OVERFLOW_AND_COMPARE,
-			      true);
-
-	/* If config was called while timer was running it must be reenabled. */
-	if (timer_active)
-		pwm_omap_dmtimer_start(omap);
-
-	mutex_unlock(&omap->mutex);
-
 	return 0;
-
-err_einval:
-	mutex_unlock(&omap->mutex);
-
-	return -EINVAL;
 }
 
-static int pwm_omap_dmtimer_set_polarity(struct pwm_chip *chip,
-					 struct pwm_device *pwm,
-					 enum pwm_polarity polarity)
+/**
+ * pwm_omap_dmtimer_set_polarity() - Changes the polarity of the pwm dm timer.
+ * @chip:	Pointer to PWM controller
+ * @pwm:	Pointer to PWM channel
+ * @polarity:	New pwm polarity to be set
+ */
+static void pwm_omap_dmtimer_set_polarity(struct pwm_chip *chip,
+					  struct pwm_device *pwm,
+					  enum pwm_polarity polarity)
 {
 	struct pwm_omap_dmtimer_chip *omap = to_pwm_omap_dmtimer_chip(chip);
+	bool enabled;
 
-	/*
-	 * PWM core will not call set_polarity while PWM is enabled so it's
-	 * safe to reconfigure the timer here without stopping it first.
-	 */
-	mutex_lock(&omap->mutex);
+	/* Disable the PWM before changing the polarity. */
+	enabled = pwm_omap_dmtimer_is_enabled(omap);
+	if (enabled)
+		omap->pdata->stop(omap->dm_timer);
+
 	omap->pdata->set_pwm(omap->dm_timer,
-			      polarity == PWM_POLARITY_INVERSED,
-			      true,
-			      PWM_OMAP_DMTIMER_TRIGGER_OVERFLOW_AND_COMPARE,
-			      true);
+			     polarity == PWM_POLARITY_INVERSED,
+			     true, OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE,
+			     true);
+
+	if (enabled)
+		pwm_omap_dmtimer_start(omap);
+}
+
+/**
+ * pwm_omap_dmtimer_apply() - Changes the state of the pwm omap dm timer.
+ * @chip:	Pointer to PWM controller
+ * @pwm:	Pointer to PWM channel
+ * @state:	New state to apply
+ *
+ * Return 0 if successfully changed the state else appropriate error.
+ */
+static int pwm_omap_dmtimer_apply(struct pwm_chip *chip,
+				  struct pwm_device *pwm,
+				  const struct pwm_state *state)
+{
+	struct pwm_omap_dmtimer_chip *omap = to_pwm_omap_dmtimer_chip(chip);
+	int ret = 0;
+
+	mutex_lock(&omap->mutex);
+
+	if (pwm_omap_dmtimer_is_enabled(omap) && !state->enabled) {
+		omap->pdata->stop(omap->dm_timer);
+		goto unlock_mutex;
+	}
+
+	if (pwm_omap_dmtimer_polarity(omap) != state->polarity)
+		pwm_omap_dmtimer_set_polarity(chip, pwm, state->polarity);
+
+	ret = pwm_omap_dmtimer_config(chip, pwm, state->duty_cycle,
+				      state->period);
+	if (ret)
+		goto unlock_mutex;
+
+	if (!pwm_omap_dmtimer_is_enabled(omap) && state->enabled) {
+		omap->pdata->set_pwm(omap->dm_timer,
+				     state->polarity == PWM_POLARITY_INVERSED,
+				     true,
+				     OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE,
+				     true);
+		pwm_omap_dmtimer_start(omap);
+	}
+
+unlock_mutex:
 	mutex_unlock(&omap->mutex);
 
-	return 0;
+	return ret;
 }
 
 static const struct pwm_ops pwm_omap_dmtimer_ops = {
-	.enable	= pwm_omap_dmtimer_enable,
-	.disable = pwm_omap_dmtimer_disable,
-	.config	= pwm_omap_dmtimer_config,
-	.set_polarity = pwm_omap_dmtimer_set_polarity,
+	.apply = pwm_omap_dmtimer_apply,
 	.owner = THIS_MODULE,
 };
 
 static int pwm_omap_dmtimer_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
-	struct device_node *timer;
-	struct platform_device *timer_pdev;
-	struct pwm_omap_dmtimer_chip *omap;
 	struct dmtimer_platform_data *timer_pdata;
 	const struct omap_dm_timer_ops *pdata;
-	pwm_omap_dmtimer *dm_timer;
-	u32 v;
+	struct platform_device *timer_pdev;
+	struct pwm_omap_dmtimer_chip *omap;
+	struct omap_dm_timer *dm_timer;
+	struct device_node *timer;
 	int ret = 0;
+	u32 v;
 
 	timer = of_parse_phandle(np, "ti,timers", 0);
 	if (!timer)
@@ -281,6 +357,7 @@ static int pwm_omap_dmtimer_probe(struct platform_device *pdev)
 	    !pdata->set_load ||
 	    !pdata->set_match ||
 	    !pdata->set_pwm ||
+	    !pdata->get_pwm_status ||
 	    !pdata->set_prescaler ||
 	    !pdata->write_counter) {
 		dev_err(&pdev->dev, "Incomplete dmtimer pdata structure\n");
diff --git a/drivers/pwm/pwm-pca9685.c b/drivers/pwm/pwm-pca9685.c
index b07bdca..76cd22b 100644
--- a/drivers/pwm/pwm-pca9685.c
+++ b/drivers/pwm/pwm-pca9685.c
@@ -20,6 +20,7 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/pm_runtime.h>
+#include <linux/bitmap.h>
 
 /*
  * Because the PCA9685 has only one prescaler per chip, changing the period of
@@ -69,11 +70,11 @@
 struct pca9685 {
 	struct pwm_chip chip;
 	struct regmap *regmap;
-	int duty_ns;
 	int period_ns;
 #if IS_ENABLED(CONFIG_GPIOLIB)
 	struct mutex lock;
 	struct gpio_chip gpio;
+	DECLARE_BITMAP(pwms_inuse, PCA9685_MAXCHAN + 1);
 #endif
 };
 
@@ -83,53 +84,53 @@ static inline struct pca9685 *to_pca(struct pwm_chip *chip)
 }
 
 #if IS_ENABLED(CONFIG_GPIOLIB)
+static bool pca9685_pwm_test_and_set_inuse(struct pca9685 *pca, int pwm_idx)
+{
+	bool is_inuse;
+
+	mutex_lock(&pca->lock);
+	if (pwm_idx >= PCA9685_MAXCHAN) {
+		/*
+		 * "all LEDs" channel:
+		 * pretend already in use if any of the PWMs are requested
+		 */
+		if (!bitmap_empty(pca->pwms_inuse, PCA9685_MAXCHAN)) {
+			is_inuse = true;
+			goto out;
+		}
+	} else {
+		/*
+		 * regular channel:
+		 * pretend already in use if the "all LEDs" channel is requested
+		 */
+		if (test_bit(PCA9685_MAXCHAN, pca->pwms_inuse)) {
+			is_inuse = true;
+			goto out;
+		}
+	}
+	is_inuse = test_and_set_bit(pwm_idx, pca->pwms_inuse);
+out:
+	mutex_unlock(&pca->lock);
+	return is_inuse;
+}
+
+static void pca9685_pwm_clear_inuse(struct pca9685 *pca, int pwm_idx)
+{
+	mutex_lock(&pca->lock);
+	clear_bit(pwm_idx, pca->pwms_inuse);
+	mutex_unlock(&pca->lock);
+}
+
 static int pca9685_pwm_gpio_request(struct gpio_chip *gpio, unsigned int offset)
 {
 	struct pca9685 *pca = gpiochip_get_data(gpio);
-	struct pwm_device *pwm;
 
-	mutex_lock(&pca->lock);
-
-	pwm = &pca->chip.pwms[offset];
-
-	if (pwm->flags & (PWMF_REQUESTED | PWMF_EXPORTED)) {
-		mutex_unlock(&pca->lock);
+	if (pca9685_pwm_test_and_set_inuse(pca, offset))
 		return -EBUSY;
-	}
-
-	pwm_set_chip_data(pwm, (void *)1);
-
-	mutex_unlock(&pca->lock);
 	pm_runtime_get_sync(pca->chip.dev);
 	return 0;
 }
 
-static bool pca9685_pwm_is_gpio(struct pca9685 *pca, struct pwm_device *pwm)
-{
-	bool is_gpio = false;
-
-	mutex_lock(&pca->lock);
-
-	if (pwm->hwpwm >= PCA9685_MAXCHAN) {
-		unsigned int i;
-
-		/*
-		 * Check if any of the GPIOs are requested and in that case
-		 * prevent using the "all LEDs" channel.
-		 */
-		for (i = 0; i < pca->gpio.ngpio; i++)
-			if (gpiochip_is_requested(&pca->gpio, i)) {
-				is_gpio = true;
-				break;
-			}
-	} else if (pwm_get_chip_data(pwm)) {
-		is_gpio = true;
-	}
-
-	mutex_unlock(&pca->lock);
-	return is_gpio;
-}
-
 static int pca9685_pwm_gpio_get(struct gpio_chip *gpio, unsigned int offset)
 {
 	struct pca9685 *pca = gpiochip_get_data(gpio);
@@ -162,13 +163,14 @@ static void pca9685_pwm_gpio_free(struct gpio_chip *gpio, unsigned int offset)
 
 	pca9685_pwm_gpio_set(gpio, offset, 0);
 	pm_runtime_put(pca->chip.dev);
+	pca9685_pwm_clear_inuse(pca, offset);
 }
 
 static int pca9685_pwm_gpio_get_direction(struct gpio_chip *chip,
 					  unsigned int offset)
 {
 	/* Always out */
-	return 0;
+	return GPIO_LINE_DIRECTION_OUT;
 }
 
 static int pca9685_pwm_gpio_direction_input(struct gpio_chip *gpio,
@@ -213,12 +215,17 @@ static int pca9685_pwm_gpio_probe(struct pca9685 *pca)
 	return devm_gpiochip_add_data(dev, &pca->gpio, pca);
 }
 #else
-static inline bool pca9685_pwm_is_gpio(struct pca9685 *pca,
-				       struct pwm_device *pwm)
+static inline bool pca9685_pwm_test_and_set_inuse(struct pca9685 *pca,
+						  int pwm_idx)
 {
 	return false;
 }
 
+static inline void
+pca9685_pwm_clear_inuse(struct pca9685 *pca, int pwm_idx)
+{
+}
+
 static inline int pca9685_pwm_gpio_probe(struct pca9685 *pca)
 {
 	return 0;
@@ -272,8 +279,6 @@ static int pca9685_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 		}
 	}
 
-	pca->duty_ns = duty_ns;
-
 	if (duty_ns < 1) {
 		if (pwm->hwpwm >= PCA9685_MAXCHAN)
 			reg = PCA9685_ALL_LED_OFF_H;
@@ -402,7 +407,7 @@ static int pca9685_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
 {
 	struct pca9685 *pca = to_pca(chip);
 
-	if (pca9685_pwm_is_gpio(pca, pwm))
+	if (pca9685_pwm_test_and_set_inuse(pca, pwm->hwpwm))
 		return -EBUSY;
 	pm_runtime_get_sync(chip->dev);
 
@@ -411,8 +416,11 @@ static int pca9685_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
 
 static void pca9685_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
 {
+	struct pca9685 *pca = to_pca(chip);
+
 	pca9685_pwm_disable(chip, pwm);
 	pm_runtime_put(chip->dev);
+	pca9685_pwm_clear_inuse(pca, pwm->hwpwm);
 }
 
 static const struct pwm_ops pca9685_pwm_ops = {
@@ -449,7 +457,6 @@ static int pca9685_pwm_probe(struct i2c_client *client,
 			ret);
 		return ret;
 	}
-	pca->duty_ns = 0;
 	pca->period_ns = PCA9685_DEFAULT_PERIOD;
 
 	i2c_set_clientdata(client, pca);
@@ -512,8 +519,7 @@ static int pca9685_pwm_remove(struct i2c_client *client)
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static int pca9685_pwm_runtime_suspend(struct device *dev)
+static int __maybe_unused pca9685_pwm_runtime_suspend(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct pca9685 *pca = i2c_get_clientdata(client);
@@ -522,7 +528,7 @@ static int pca9685_pwm_runtime_suspend(struct device *dev)
 	return 0;
 }
 
-static int pca9685_pwm_runtime_resume(struct device *dev)
+static int __maybe_unused pca9685_pwm_runtime_resume(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct pca9685 *pca = i2c_get_clientdata(client);
@@ -530,7 +536,6 @@ static int pca9685_pwm_runtime_resume(struct device *dev)
 	pca9685_set_sleep_mode(pca, false);
 	return 0;
 }
-#endif
 
 static const struct i2c_device_id pca9685_id[] = {
 	{ "pca9685", 0 },
diff --git a/drivers/pwm/pwm-rcar.c b/drivers/pwm/pwm-rcar.c
index 2685577..7ab9eb6 100644
--- a/drivers/pwm/pwm-rcar.c
+++ b/drivers/pwm/pwm-rcar.c
@@ -229,24 +229,28 @@ static int rcar_pwm_probe(struct platform_device *pdev)
 	rcar_pwm->chip.base = -1;
 	rcar_pwm->chip.npwm = 1;
 
+	pm_runtime_enable(&pdev->dev);
+
 	ret = pwmchip_add(&rcar_pwm->chip);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to register PWM chip: %d\n", ret);
+		pm_runtime_disable(&pdev->dev);
 		return ret;
 	}
 
-	pm_runtime_enable(&pdev->dev);
-
 	return 0;
 }
 
 static int rcar_pwm_remove(struct platform_device *pdev)
 {
 	struct rcar_pwm_chip *rcar_pwm = platform_get_drvdata(pdev);
+	int ret;
+
+	ret = pwmchip_remove(&rcar_pwm->chip);
 
 	pm_runtime_disable(&pdev->dev);
 
-	return pwmchip_remove(&rcar_pwm->chip);
+	return ret;
 }
 
 static const struct of_device_id rcar_pwm_of_table[] = {
diff --git a/drivers/pwm/pwm-renesas-tpu.c b/drivers/pwm/pwm-renesas-tpu.c
index 4a855a2..81ad5a5 100644
--- a/drivers/pwm/pwm-renesas-tpu.c
+++ b/drivers/pwm/pwm-renesas-tpu.c
@@ -415,16 +415,15 @@ static int tpu_probe(struct platform_device *pdev)
 	tpu->chip.base = -1;
 	tpu->chip.npwm = TPU_CHANNEL_MAX;
 
+	pm_runtime_enable(&pdev->dev);
+
 	ret = pwmchip_add(&tpu->chip);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to register PWM chip\n");
+		pm_runtime_disable(&pdev->dev);
 		return ret;
 	}
 
-	dev_info(&pdev->dev, "TPU PWM %d registered\n", tpu->pdev->id);
-
-	pm_runtime_enable(&pdev->dev);
-
 	return 0;
 }
 
@@ -434,12 +433,10 @@ static int tpu_remove(struct platform_device *pdev)
 	int ret;
 
 	ret = pwmchip_remove(&tpu->chip);
-	if (ret)
-		return ret;
 
 	pm_runtime_disable(&pdev->dev);
 
-	return 0;
+	return ret;
 }
 
 #ifdef CONFIG_OF
diff --git a/drivers/pwm/pwm-sun4i.c b/drivers/pwm/pwm-sun4i.c
index 3e3efa6..5c677c5 100644
--- a/drivers/pwm/pwm-sun4i.c
+++ b/drivers/pwm/pwm-sun4i.c
@@ -90,7 +90,6 @@ struct sun4i_pwm_chip {
 	spinlock_t ctrl_lock;
 	const struct sun4i_pwm_data *data;
 	unsigned long next_period[2];
-	bool needs_delay[2];
 };
 
 static inline struct sun4i_pwm_chip *to_sun4i_pwm_chip(struct pwm_chip *chip)
@@ -287,7 +286,6 @@ static int sun4i_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	sun4i_pwm_writel(sun4i_pwm, val, PWM_CH_PRD(pwm->hwpwm));
 	sun4i_pwm->next_period[pwm->hwpwm] = jiffies +
 		usecs_to_jiffies(cstate.period / 1000 + 1);
-	sun4i_pwm->needs_delay[pwm->hwpwm] = true;
 
 	if (state->polarity != PWM_POLARITY_NORMAL)
 		ctrl &= ~BIT_CH(PWM_ACT_STATE, pwm->hwpwm);
@@ -298,7 +296,7 @@ static int sun4i_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 
 	if (state->enabled) {
 		ctrl |= BIT_CH(PWM_EN, pwm->hwpwm);
-	} else if (!sun4i_pwm->needs_delay[pwm->hwpwm]) {
+	} else {
 		ctrl &= ~BIT_CH(PWM_EN, pwm->hwpwm);
 		ctrl &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
 	}
@@ -310,15 +308,9 @@ static int sun4i_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	if (state->enabled)
 		return 0;
 
-	if (!sun4i_pwm->needs_delay[pwm->hwpwm]) {
-		clk_disable_unprepare(sun4i_pwm->clk);
-		return 0;
-	}
-
 	/* We need a full period to elapse before disabling the channel. */
 	now = jiffies;
-	if (sun4i_pwm->needs_delay[pwm->hwpwm] &&
-	    time_before(now, sun4i_pwm->next_period[pwm->hwpwm])) {
+	if (time_before(now, sun4i_pwm->next_period[pwm->hwpwm])) {
 		delay_us = jiffies_to_usecs(sun4i_pwm->next_period[pwm->hwpwm] -
 					   now);
 		if ((delay_us / 500) > MAX_UDELAY_MS)
@@ -326,7 +318,6 @@ static int sun4i_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 		else
 			usleep_range(delay_us, delay_us * 2);
 	}
-	sun4i_pwm->needs_delay[pwm->hwpwm] = false;
 
 	spin_lock(&sun4i_pwm->ctrl_lock);
 	ctrl = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG);
diff --git a/drivers/pwm/pwm-tegra.c b/drivers/pwm/pwm-tegra.c
index aa12fb3..d26ed8f 100644
--- a/drivers/pwm/pwm-tegra.c
+++ b/drivers/pwm/pwm-tegra.c
@@ -282,9 +282,15 @@ static const struct tegra_pwm_soc tegra186_pwm_soc = {
 	.max_frequency = 102000000UL,
 };
 
+static const struct tegra_pwm_soc tegra194_pwm_soc = {
+	.num_channels = 1,
+	.max_frequency = 408000000UL,
+};
+
 static const struct of_device_id tegra_pwm_of_match[] = {
 	{ .compatible = "nvidia,tegra20-pwm", .data = &tegra20_pwm_soc },
 	{ .compatible = "nvidia,tegra186-pwm", .data = &tegra186_pwm_soc },
+	{ .compatible = "nvidia,tegra194-pwm", .data = &tegra194_pwm_soc },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, tegra_pwm_of_match);
diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
index ffdb5bc..fbaed07 100644
--- a/drivers/remoteproc/Kconfig
+++ b/drivers/remoteproc/Kconfig
@@ -35,7 +35,7 @@
 
 config OMAP_REMOTEPROC
 	tristate "OMAP remoteproc support"
-	depends on ARCH_OMAP4 || SOC_OMAP5
+	depends on ARCH_OMAP4 || SOC_OMAP5 || SOC_DRA7XX
 	depends on OMAP_IOMMU
 	select MAILBOX
 	select OMAP2PLUS_MBOX
@@ -52,6 +52,18 @@
 	  It's safe to say N here if you're not interested in multimedia
 	  offloading or just want a bare minimum kernel.
 
+config OMAP_REMOTEPROC_WATCHDOG
+	bool "OMAP remoteproc watchdog timer"
+	depends on OMAP_REMOTEPROC
+	default n
+	help
+	  Say Y here to enable watchdog timer for remote processors.
+
+	  This option controls the watchdog functionality for the remote
+	  processors in OMAP. Dedicated OMAP DMTimers are used by the remote
+	  processors and triggers the timer interrupt upon a watchdog
+	  detection.
+
 config WKUP_M3_RPROC
 	tristate "AMx3xx Wakeup M3 remoteproc support"
 	depends on SOC_AM33XX || SOC_AM43XX
diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
index 3e72b6f..8957ed2 100644
--- a/drivers/remoteproc/imx_rproc.c
+++ b/drivers/remoteproc/imx_rproc.c
@@ -186,7 +186,7 @@ static int imx_rproc_stop(struct rproc *rproc)
 }
 
 static int imx_rproc_da_to_sys(struct imx_rproc *priv, u64 da,
-			       int len, u64 *sys)
+			       size_t len, u64 *sys)
 {
 	const struct imx_rproc_dcfg *dcfg = priv->dcfg;
 	int i;
@@ -203,19 +203,19 @@ static int imx_rproc_da_to_sys(struct imx_rproc *priv, u64 da,
 		}
 	}
 
-	dev_warn(priv->dev, "Translation failed: da = 0x%llx len = 0x%x\n",
+	dev_warn(priv->dev, "Translation failed: da = 0x%llx len = 0x%zx\n",
 		 da, len);
 	return -ENOENT;
 }
 
-static void *imx_rproc_da_to_va(struct rproc *rproc, u64 da, int len)
+static void *imx_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len)
 {
 	struct imx_rproc *priv = rproc->priv;
 	void *va = NULL;
 	u64 sys;
 	int i;
 
-	if (len <= 0)
+	if (len == 0)
 		return NULL;
 
 	/*
@@ -235,7 +235,8 @@ static void *imx_rproc_da_to_va(struct rproc *rproc, u64 da, int len)
 		}
 	}
 
-	dev_dbg(&rproc->dev, "da = 0x%llx len = 0x%x va = 0x%p\n", da, len, va);
+	dev_dbg(&rproc->dev, "da = 0x%llx len = 0x%zx va = 0x%p\n",
+		da, len, va);
 
 	return va;
 }
diff --git a/drivers/remoteproc/keystone_remoteproc.c b/drivers/remoteproc/keystone_remoteproc.c
index 5c4658f..cd26616 100644
--- a/drivers/remoteproc/keystone_remoteproc.c
+++ b/drivers/remoteproc/keystone_remoteproc.c
@@ -246,7 +246,7 @@ static void keystone_rproc_kick(struct rproc *rproc, int vqid)
  * can be used either by the remoteproc core for loading (when using kernel
  * remoteproc loader), or by any rpmsg bus drivers.
  */
-static void *keystone_rproc_da_to_va(struct rproc *rproc, u64 da, int len)
+static void *keystone_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len)
 {
 	struct keystone_rproc *ksproc = rproc->priv;
 	void __iomem *va = NULL;
@@ -255,7 +255,7 @@ static void *keystone_rproc_da_to_va(struct rproc *rproc, u64 da, int len)
 	size_t size;
 	int i;
 
-	if (len <= 0)
+	if (len == 0)
 		return NULL;
 
 	for (i = 0; i < ksproc->num_mems; i++) {
diff --git a/drivers/remoteproc/mtk_scp.c b/drivers/remoteproc/mtk_scp.c
index 7ccdf64..ea3743e 100644
--- a/drivers/remoteproc/mtk_scp.c
+++ b/drivers/remoteproc/mtk_scp.c
@@ -320,7 +320,7 @@ static int scp_start(struct rproc *rproc)
 	return ret;
 }
 
-static void *scp_da_to_va(struct rproc *rproc, u64 da, int len)
+static void *scp_da_to_va(struct rproc *rproc, u64 da, size_t len)
 {
 	struct mtk_scp *scp = (struct mtk_scp *)rproc->priv;
 	int offset;
diff --git a/drivers/remoteproc/omap_remoteproc.c b/drivers/remoteproc/omap_remoteproc.c
index 639819407..6955fab 100644
--- a/drivers/remoteproc/omap_remoteproc.c
+++ b/drivers/remoteproc/omap_remoteproc.c
@@ -2,7 +2,7 @@
 /*
  * OMAP Remote Processor driver
  *
- * Copyright (C) 2011 Texas Instruments, Inc.
+ * Copyright (C) 2011-2020 Texas Instruments Incorporated - http://www.ti.com/
  * Copyright (C) 2011 Google, Inc.
  *
  * Ohad Ben-Cohen <ohad@wizery.com>
@@ -15,31 +15,466 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/clk/ti.h>
 #include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of_device.h>
+#include <linux/of_reserved_mem.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
 #include <linux/remoteproc.h>
 #include <linux/mailbox_client.h>
+#include <linux/omap-iommu.h>
 #include <linux/omap-mailbox.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <linux/reset.h>
+#include <clocksource/timer-ti-dm.h>
 
-#include <linux/platform_data/remoteproc-omap.h>
+#include <linux/platform_data/dmtimer-omap.h>
 
 #include "omap_remoteproc.h"
 #include "remoteproc_internal.h"
 
+/* default auto-suspend delay (ms) */
+#define DEFAULT_AUTOSUSPEND_DELAY		10000
+
+/**
+ * struct omap_rproc_boot_data - boot data structure for the DSP omap rprocs
+ * @syscon: regmap handle for the system control configuration module
+ * @boot_reg: boot register offset within the @syscon regmap
+ * @boot_reg_shift: bit-field shift required for the boot address value in
+ *		    @boot_reg
+ */
+struct omap_rproc_boot_data {
+	struct regmap *syscon;
+	unsigned int boot_reg;
+	unsigned int boot_reg_shift;
+};
+
+/**
+ * struct omap_rproc_mem - internal memory structure
+ * @cpu_addr: MPU virtual address of the memory region
+ * @bus_addr: bus address used to access the memory region
+ * @dev_addr: device address of the memory region from DSP view
+ * @size: size of the memory region
+ */
+struct omap_rproc_mem {
+	void __iomem *cpu_addr;
+	phys_addr_t bus_addr;
+	u32 dev_addr;
+	size_t size;
+};
+
+/**
+ * struct omap_rproc_timer - data structure for a timer used by a omap rproc
+ * @odt: timer pointer
+ * @timer_ops: OMAP dmtimer ops for @odt timer
+ * @irq: timer irq
+ */
+struct omap_rproc_timer {
+	struct omap_dm_timer *odt;
+	const struct omap_dm_timer_ops *timer_ops;
+	int irq;
+};
+
 /**
  * struct omap_rproc - omap remote processor state
  * @mbox: mailbox channel handle
  * @client: mailbox client to request the mailbox channel
+ * @boot_data: boot data structure for setting processor boot address
+ * @mem: internal memory regions data
+ * @num_mems: number of internal memory regions
+ * @num_timers: number of rproc timer(s)
+ * @num_wd_timers: number of rproc watchdog timers
+ * @timers: timer(s) info used by rproc
+ * @autosuspend_delay: auto-suspend delay value to be used for runtime pm
+ * @need_resume: if true a resume is needed in the system resume callback
  * @rproc: rproc handle
+ * @reset: reset handle
+ * @pm_comp: completion primitive to sync for suspend response
+ * @fck: functional clock for the remoteproc
+ * @suspend_acked: state machine flag to store the suspend request ack
  */
 struct omap_rproc {
 	struct mbox_chan *mbox;
 	struct mbox_client client;
+	struct omap_rproc_boot_data *boot_data;
+	struct omap_rproc_mem *mem;
+	int num_mems;
+	int num_timers;
+	int num_wd_timers;
+	struct omap_rproc_timer *timers;
+	int autosuspend_delay;
+	bool need_resume;
 	struct rproc *rproc;
+	struct reset_control *reset;
+	struct completion pm_comp;
+	struct clk *fck;
+	bool suspend_acked;
 };
 
 /**
+ * struct omap_rproc_mem_data - memory definitions for an omap remote processor
+ * @name: name for this memory entry
+ * @dev_addr: device address for the memory entry
+ */
+struct omap_rproc_mem_data {
+	const char *name;
+	const u32 dev_addr;
+};
+
+/**
+ * struct omap_rproc_dev_data - device data for the omap remote processor
+ * @device_name: device name of the remote processor
+ * @mems: memory definitions for this remote processor
+ */
+struct omap_rproc_dev_data {
+	const char *device_name;
+	const struct omap_rproc_mem_data *mems;
+};
+
+/**
+ * omap_rproc_request_timer() - request a timer for a remoteproc
+ * @dev: device requesting the timer
+ * @np: device node pointer to the desired timer
+ * @timer: handle to a struct omap_rproc_timer to return the timer handle
+ *
+ * This helper function is used primarily to request a timer associated with
+ * a remoteproc. The returned handle is stored in the .odt field of the
+ * @timer structure passed in, and is used to invoke other timer specific
+ * ops (like starting a timer either during device initialization or during
+ * a resume operation, or for stopping/freeing a timer).
+ *
+ * Return: 0 on success, otherwise an appropriate failure
+ */
+static int omap_rproc_request_timer(struct device *dev, struct device_node *np,
+				    struct omap_rproc_timer *timer)
+{
+	int ret;
+
+	timer->odt = timer->timer_ops->request_by_node(np);
+	if (!timer->odt) {
+		dev_err(dev, "request for timer node %p failed\n", np);
+		return -EBUSY;
+	}
+
+	ret = timer->timer_ops->set_source(timer->odt, OMAP_TIMER_SRC_SYS_CLK);
+	if (ret) {
+		dev_err(dev, "error setting OMAP_TIMER_SRC_SYS_CLK as source for timer node %p\n",
+			np);
+		timer->timer_ops->free(timer->odt);
+		return ret;
+	}
+
+	/* clean counter, remoteproc code will set the value */
+	timer->timer_ops->set_load(timer->odt, 0);
+
+	return 0;
+}
+
+/**
+ * omap_rproc_start_timer() - start a timer for a remoteproc
+ * @timer: handle to a OMAP rproc timer
+ *
+ * This helper function is used to start a timer associated with a remoteproc,
+ * obtained using the request_timer ops. The helper function needs to be
+ * invoked by the driver to start the timer (during device initialization)
+ * or to just resume the timer.
+ *
+ * Return: 0 on success, otherwise a failure as returned by DMTimer ops
+ */
+static inline int omap_rproc_start_timer(struct omap_rproc_timer *timer)
+{
+	return timer->timer_ops->start(timer->odt);
+}
+
+/**
+ * omap_rproc_stop_timer() - stop a timer for a remoteproc
+ * @timer: handle to a OMAP rproc timer
+ *
+ * This helper function is used to disable a timer associated with a
+ * remoteproc, and needs to be called either during a device shutdown
+ * or suspend operation. The separate helper function allows the driver
+ * to just stop a timer without having to release the timer during a
+ * suspend operation.
+ *
+ * Return: 0 on success, otherwise a failure as returned by DMTimer ops
+ */
+static inline int omap_rproc_stop_timer(struct omap_rproc_timer *timer)
+{
+	return timer->timer_ops->stop(timer->odt);
+}
+
+/**
+ * omap_rproc_release_timer() - release a timer for a remoteproc
+ * @timer: handle to a OMAP rproc timer
+ *
+ * This helper function is used primarily to release a timer associated
+ * with a remoteproc. The dmtimer will be available for other clients to
+ * use once released.
+ *
+ * Return: 0 on success, otherwise a failure as returned by DMTimer ops
+ */
+static inline int omap_rproc_release_timer(struct omap_rproc_timer *timer)
+{
+	return timer->timer_ops->free(timer->odt);
+}
+
+/**
+ * omap_rproc_get_timer_irq() - get the irq for a timer
+ * @timer: handle to a OMAP rproc timer
+ *
+ * This function is used to get the irq associated with a watchdog timer. The
+ * function is called by the OMAP remoteproc driver to register a interrupt
+ * handler to handle watchdog events on the remote processor.
+ *
+ * Return: irq id on success, otherwise a failure as returned by DMTimer ops
+ */
+static inline int omap_rproc_get_timer_irq(struct omap_rproc_timer *timer)
+{
+	return timer->timer_ops->get_irq(timer->odt);
+}
+
+/**
+ * omap_rproc_ack_timer_irq() - acknowledge a timer irq
+ * @timer: handle to a OMAP rproc timer
+ *
+ * This function is used to clear the irq associated with a watchdog timer. The
+ * The function is called by the OMAP remoteproc upon a watchdog event on the
+ * remote processor to clear the interrupt status of the watchdog timer.
+ */
+static inline void omap_rproc_ack_timer_irq(struct omap_rproc_timer *timer)
+{
+	timer->timer_ops->write_status(timer->odt, OMAP_TIMER_INT_OVERFLOW);
+}
+
+/**
+ * omap_rproc_watchdog_isr() - Watchdog ISR handler for remoteproc device
+ * @irq: IRQ number associated with a watchdog timer
+ * @data: IRQ handler data
+ *
+ * This ISR routine executes the required necessary low-level code to
+ * acknowledge a watchdog timer interrupt. There can be multiple watchdog
+ * timers associated with a rproc (like IPUs which have 2 watchdog timers,
+ * one per Cortex M3/M4 core), so a lookup has to be performed to identify
+ * the timer to acknowledge its interrupt.
+ *
+ * The function also invokes rproc_report_crash to report the watchdog event
+ * to the remoteproc driver core, to trigger a recovery.
+ *
+ * Return: IRQ_HANDLED on success, otherwise IRQ_NONE
+ */
+static irqreturn_t omap_rproc_watchdog_isr(int irq, void *data)
+{
+	struct rproc *rproc = data;
+	struct omap_rproc *oproc = rproc->priv;
+	struct device *dev = rproc->dev.parent;
+	struct omap_rproc_timer *timers = oproc->timers;
+	struct omap_rproc_timer *wd_timer = NULL;
+	int num_timers = oproc->num_timers + oproc->num_wd_timers;
+	int i;
+
+	for (i = oproc->num_timers; i < num_timers; i++) {
+		if (timers[i].irq > 0 && irq == timers[i].irq) {
+			wd_timer = &timers[i];
+			break;
+		}
+	}
+
+	if (!wd_timer) {
+		dev_err(dev, "invalid timer\n");
+		return IRQ_NONE;
+	}
+
+	omap_rproc_ack_timer_irq(wd_timer);
+
+	rproc_report_crash(rproc, RPROC_WATCHDOG);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * omap_rproc_enable_timers() - enable the timers for a remoteproc
+ * @rproc: handle of a remote processor
+ * @configure: boolean flag used to acquire and configure the timer handle
+ *
+ * This function is used primarily to enable the timers associated with
+ * a remoteproc. The configure flag is provided to allow the driver to
+ * to either acquire and start a timer (during device initialization) or
+ * to just start a timer (during a resume operation).
+ *
+ * Return: 0 on success, otherwise an appropriate failure
+ */
+static int omap_rproc_enable_timers(struct rproc *rproc, bool configure)
+{
+	int i;
+	int ret = 0;
+	struct platform_device *tpdev;
+	struct dmtimer_platform_data *tpdata;
+	const struct omap_dm_timer_ops *timer_ops;
+	struct omap_rproc *oproc = rproc->priv;
+	struct omap_rproc_timer *timers = oproc->timers;
+	struct device *dev = rproc->dev.parent;
+	struct device_node *np = NULL;
+	int num_timers = oproc->num_timers + oproc->num_wd_timers;
+
+	if (!num_timers)
+		return 0;
+
+	if (!configure)
+		goto start_timers;
+
+	for (i = 0; i < num_timers; i++) {
+		if (i < oproc->num_timers)
+			np = of_parse_phandle(dev->of_node, "ti,timers", i);
+		else
+			np = of_parse_phandle(dev->of_node,
+					      "ti,watchdog-timers",
+					      (i - oproc->num_timers));
+		if (!np) {
+			ret = -ENXIO;
+			dev_err(dev, "device node lookup for timer at index %d failed: %d\n",
+				i < oproc->num_timers ? i :
+				i - oproc->num_timers, ret);
+			goto free_timers;
+		}
+
+		tpdev = of_find_device_by_node(np);
+		if (!tpdev) {
+			ret = -ENODEV;
+			dev_err(dev, "could not get timer platform device\n");
+			goto put_node;
+		}
+
+		tpdata = dev_get_platdata(&tpdev->dev);
+		put_device(&tpdev->dev);
+		if (!tpdata) {
+			ret = -EINVAL;
+			dev_err(dev, "dmtimer pdata structure NULL\n");
+			goto put_node;
+		}
+
+		timer_ops = tpdata->timer_ops;
+		if (!timer_ops || !timer_ops->request_by_node ||
+		    !timer_ops->set_source || !timer_ops->set_load ||
+		    !timer_ops->free || !timer_ops->start ||
+		    !timer_ops->stop || !timer_ops->get_irq ||
+		    !timer_ops->write_status) {
+			ret = -EINVAL;
+			dev_err(dev, "device does not have required timer ops\n");
+			goto put_node;
+		}
+
+		timers[i].irq = -1;
+		timers[i].timer_ops = timer_ops;
+		ret = omap_rproc_request_timer(dev, np, &timers[i]);
+		if (ret) {
+			dev_err(dev, "request for timer %p failed: %d\n", np,
+				ret);
+			goto put_node;
+		}
+		of_node_put(np);
+
+		if (i >= oproc->num_timers) {
+			timers[i].irq = omap_rproc_get_timer_irq(&timers[i]);
+			if (timers[i].irq < 0) {
+				dev_err(dev, "get_irq for timer %p failed: %d\n",
+					np, timers[i].irq);
+				ret = -EBUSY;
+				goto free_timers;
+			}
+
+			ret = request_irq(timers[i].irq,
+					  omap_rproc_watchdog_isr, IRQF_SHARED,
+					  "rproc-wdt", rproc);
+			if (ret) {
+				dev_err(dev, "error requesting irq for timer %p\n",
+					np);
+				omap_rproc_release_timer(&timers[i]);
+				timers[i].odt = NULL;
+				timers[i].timer_ops = NULL;
+				timers[i].irq = -1;
+				goto free_timers;
+			}
+		}
+	}
+
+start_timers:
+	for (i = 0; i < num_timers; i++) {
+		ret = omap_rproc_start_timer(&timers[i]);
+		if (ret) {
+			dev_err(dev, "start timer %p failed failed: %d\n", np,
+				ret);
+			break;
+		}
+	}
+	if (ret) {
+		while (i >= 0) {
+			omap_rproc_stop_timer(&timers[i]);
+			i--;
+		}
+		goto put_node;
+	}
+	return 0;
+
+put_node:
+	if (configure)
+		of_node_put(np);
+free_timers:
+	while (i--) {
+		if (i >= oproc->num_timers)
+			free_irq(timers[i].irq, rproc);
+		omap_rproc_release_timer(&timers[i]);
+		timers[i].odt = NULL;
+		timers[i].timer_ops = NULL;
+		timers[i].irq = -1;
+	}
+
+	return ret;
+}
+
+/**
+ * omap_rproc_disable_timers() - disable the timers for a remoteproc
+ * @rproc: handle of a remote processor
+ * @configure: boolean flag used to release the timer handle
+ *
+ * This function is used primarily to disable the timers associated with
+ * a remoteproc. The configure flag is provided to allow the driver to
+ * to either stop and release a timer (during device shutdown) or to just
+ * stop a timer (during a suspend operation).
+ *
+ * Return: 0 on success or no timers
+ */
+static int omap_rproc_disable_timers(struct rproc *rproc, bool configure)
+{
+	int i;
+	struct omap_rproc *oproc = rproc->priv;
+	struct omap_rproc_timer *timers = oproc->timers;
+	int num_timers = oproc->num_timers + oproc->num_wd_timers;
+
+	if (!num_timers)
+		return 0;
+
+	for (i = 0; i < num_timers; i++) {
+		omap_rproc_stop_timer(&timers[i]);
+		if (configure) {
+			if (i >= oproc->num_timers)
+				free_irq(timers[i].irq, rproc);
+			omap_rproc_release_timer(&timers[i]);
+			timers[i].odt = NULL;
+			timers[i].timer_ops = NULL;
+			timers[i].irq = -1;
+		}
+	}
+
+	return 0;
+}
+
+/**
  * omap_rproc_mbox_callback() - inbound mailbox message handler
  * @client: mailbox client pointer used for requesting the mailbox channel
  * @data: mailbox payload
@@ -65,13 +500,29 @@ static void omap_rproc_mbox_callback(struct mbox_client *client, void *data)
 
 	switch (msg) {
 	case RP_MBOX_CRASH:
-		/* just log this for now. later, we'll also do recovery */
+		/*
+		 * remoteproc detected an exception, notify the rproc core.
+		 * The remoteproc core will handle the recovery.
+		 */
 		dev_err(dev, "omap rproc %s crashed\n", name);
+		rproc_report_crash(oproc->rproc, RPROC_FATAL_ERROR);
 		break;
 	case RP_MBOX_ECHO_REPLY:
 		dev_info(dev, "received echo reply from %s\n", name);
 		break;
+	case RP_MBOX_SUSPEND_ACK:
+		/* Fall through */
+	case RP_MBOX_SUSPEND_CANCEL:
+		oproc->suspend_acked = msg == RP_MBOX_SUSPEND_ACK;
+		complete(&oproc->pm_comp);
+		break;
 	default:
+		if (msg >= RP_MBOX_READY && msg < RP_MBOX_END_MSG)
+			return;
+		if (msg > oproc->rproc->max_notifyid) {
+			dev_dbg(dev, "dropping unknown message 0x%x", msg);
+			return;
+		}
 		/* msg contains the index of the triggered vring */
 		if (rproc_vq_interrupt(oproc->rproc, msg) == IRQ_NONE)
 			dev_dbg(dev, "no message was found in vqid %d\n", msg);
@@ -85,11 +536,52 @@ static void omap_rproc_kick(struct rproc *rproc, int vqid)
 	struct device *dev = rproc->dev.parent;
 	int ret;
 
+	/* wake up the rproc before kicking it */
+	ret = pm_runtime_get_sync(dev);
+	if (WARN_ON(ret < 0)) {
+		dev_err(dev, "pm_runtime_get_sync() failed during kick, ret = %d\n",
+			ret);
+		pm_runtime_put_noidle(dev);
+		return;
+	}
+
 	/* send the index of the triggered virtqueue in the mailbox payload */
 	ret = mbox_send_message(oproc->mbox, (void *)vqid);
 	if (ret < 0)
 		dev_err(dev, "failed to send mailbox message, status = %d\n",
 			ret);
+
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+}
+
+/**
+ * omap_rproc_write_dsp_boot_addr() - set boot address for DSP remote processor
+ * @rproc: handle of a remote processor
+ *
+ * Set boot address for a supported DSP remote processor.
+ *
+ * Return: 0 on success, or -EINVAL if boot address is not aligned properly
+ */
+static int omap_rproc_write_dsp_boot_addr(struct rproc *rproc)
+{
+	struct device *dev = rproc->dev.parent;
+	struct omap_rproc *oproc = rproc->priv;
+	struct omap_rproc_boot_data *bdata = oproc->boot_data;
+	u32 offset = bdata->boot_reg;
+	u32 value;
+	u32 mask;
+
+	if (rproc->bootaddr & (SZ_1K - 1)) {
+		dev_err(dev, "invalid boot address 0x%llx, must be aligned on a 1KB boundary\n",
+			rproc->bootaddr);
+		return -EINVAL;
+	}
+
+	value = rproc->bootaddr >> bdata->boot_reg_shift;
+	mask = ~(SZ_1K - 1) >> bdata->boot_reg_shift;
+
+	return regmap_update_bits(bdata->syscon, offset, mask, value);
 }
 
 /*
@@ -103,13 +595,14 @@ static int omap_rproc_start(struct rproc *rproc)
 {
 	struct omap_rproc *oproc = rproc->priv;
 	struct device *dev = rproc->dev.parent;
-	struct platform_device *pdev = to_platform_device(dev);
-	struct omap_rproc_pdata *pdata = pdev->dev.platform_data;
 	int ret;
 	struct mbox_client *client = &oproc->client;
 
-	if (pdata->set_bootaddr)
-		pdata->set_bootaddr(rproc->bootaddr);
+	if (oproc->boot_data) {
+		ret = omap_rproc_write_dsp_boot_addr(rproc);
+		if (ret)
+			return ret;
+	}
 
 	client->dev = dev;
 	client->tx_done = NULL;
@@ -117,7 +610,7 @@ static int omap_rproc_start(struct rproc *rproc)
 	client->tx_block = false;
 	client->knows_txdone = false;
 
-	oproc->mbox = omap_mbox_request_channel(client, pdata->mbox_name);
+	oproc->mbox = mbox_request_channel(client, 0);
 	if (IS_ERR(oproc->mbox)) {
 		ret = -EBUSY;
 		dev_err(dev, "mbox_request_channel failed: %ld\n",
@@ -138,14 +631,34 @@ static int omap_rproc_start(struct rproc *rproc)
 		goto put_mbox;
 	}
 
-	ret = pdata->device_enable(pdev);
+	ret = omap_rproc_enable_timers(rproc, true);
 	if (ret) {
-		dev_err(dev, "omap_device_enable failed: %d\n", ret);
+		dev_err(dev, "omap_rproc_enable_timers failed: %d\n", ret);
 		goto put_mbox;
 	}
 
+	ret = reset_control_deassert(oproc->reset);
+	if (ret) {
+		dev_err(dev, "reset control deassert failed: %d\n", ret);
+		goto disable_timers;
+	}
+
+	/*
+	 * remote processor is up, so update the runtime pm status and
+	 * enable the auto-suspend. The device usage count is incremented
+	 * manually for balancing it for auto-suspend
+	 */
+	pm_runtime_set_active(dev);
+	pm_runtime_use_autosuspend(dev);
+	pm_runtime_get_noresume(dev);
+	pm_runtime_enable(dev);
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
 	return 0;
 
+disable_timers:
+	omap_rproc_disable_timers(rproc, true);
 put_mbox:
 	mbox_free_channel(oproc->mbox);
 	return ret;
@@ -155,32 +668,638 @@ static int omap_rproc_start(struct rproc *rproc)
 static int omap_rproc_stop(struct rproc *rproc)
 {
 	struct device *dev = rproc->dev.parent;
-	struct platform_device *pdev = to_platform_device(dev);
-	struct omap_rproc_pdata *pdata = pdev->dev.platform_data;
 	struct omap_rproc *oproc = rproc->priv;
 	int ret;
 
-	ret = pdata->device_shutdown(pdev);
-	if (ret)
+	/*
+	 * cancel any possible scheduled runtime suspend by incrementing
+	 * the device usage count, and resuming the device. The remoteproc
+	 * also needs to be woken up if suspended, to avoid the remoteproc
+	 * OS to continue to remember any context that it has saved, and
+	 * avoid potential issues in misindentifying a subsequent device
+	 * reboot as a power restore boot
+	 */
+	ret = pm_runtime_get_sync(dev);
+	if (ret < 0) {
+		pm_runtime_put_noidle(dev);
 		return ret;
+	}
+
+	ret = reset_control_assert(oproc->reset);
+	if (ret)
+		goto out;
+
+	ret = omap_rproc_disable_timers(rproc, true);
+	if (ret)
+		goto enable_device;
 
 	mbox_free_channel(oproc->mbox);
 
+	/*
+	 * update the runtime pm states and status now that the remoteproc
+	 * has stopped
+	 */
+	pm_runtime_disable(dev);
+	pm_runtime_dont_use_autosuspend(dev);
+	pm_runtime_put_noidle(dev);
+	pm_runtime_set_suspended(dev);
+
 	return 0;
+
+enable_device:
+	reset_control_deassert(oproc->reset);
+out:
+	/* schedule the next auto-suspend */
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+	return ret;
+}
+
+/**
+ * omap_rproc_da_to_va() - internal memory translation helper
+ * @rproc: remote processor to apply the address translation for
+ * @da: device address to translate
+ * @len: length of the memory buffer
+ *
+ * Custom function implementing the rproc .da_to_va ops to provide address
+ * translation (device address to kernel virtual address) for internal RAMs
+ * present in a DSP or IPU device). The translated addresses can be used
+ * either by the remoteproc core for loading, or by any rpmsg bus drivers.
+ *
+ * Return: translated virtual address in kernel memory space on success,
+ *         or NULL on failure.
+ */
+static void *omap_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len)
+{
+	struct omap_rproc *oproc = rproc->priv;
+	int i;
+	u32 offset;
+
+	if (len <= 0)
+		return NULL;
+
+	if (!oproc->num_mems)
+		return NULL;
+
+	for (i = 0; i < oproc->num_mems; i++) {
+		if (da >= oproc->mem[i].dev_addr && da + len <=
+		    oproc->mem[i].dev_addr + oproc->mem[i].size) {
+			offset = da - oproc->mem[i].dev_addr;
+			/* __force to make sparse happy with type conversion */
+			return (__force void *)(oproc->mem[i].cpu_addr +
+						offset);
+		}
+	}
+
+	return NULL;
 }
 
 static const struct rproc_ops omap_rproc_ops = {
 	.start		= omap_rproc_start,
 	.stop		= omap_rproc_stop,
 	.kick		= omap_rproc_kick,
+	.da_to_va	= omap_rproc_da_to_va,
 };
 
+#ifdef CONFIG_PM
+static bool _is_rproc_in_standby(struct omap_rproc *oproc)
+{
+	return ti_clk_is_in_standby(oproc->fck);
+}
+
+/* 1 sec is long enough time to let the remoteproc side suspend the device */
+#define DEF_SUSPEND_TIMEOUT 1000
+static int _omap_rproc_suspend(struct rproc *rproc, bool auto_suspend)
+{
+	struct device *dev = rproc->dev.parent;
+	struct omap_rproc *oproc = rproc->priv;
+	unsigned long to = msecs_to_jiffies(DEF_SUSPEND_TIMEOUT);
+	unsigned long ta = jiffies + to;
+	u32 suspend_msg = auto_suspend ?
+				RP_MBOX_SUSPEND_AUTO : RP_MBOX_SUSPEND_SYSTEM;
+	int ret;
+
+	reinit_completion(&oproc->pm_comp);
+	oproc->suspend_acked = false;
+	ret = mbox_send_message(oproc->mbox, (void *)suspend_msg);
+	if (ret < 0) {
+		dev_err(dev, "PM mbox_send_message failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = wait_for_completion_timeout(&oproc->pm_comp, to);
+	if (!oproc->suspend_acked)
+		return -EBUSY;
+
+	/*
+	 * The remoteproc side is returning the ACK message before saving the
+	 * context, because the context saving is performed within a SYS/BIOS
+	 * function, and it cannot have any inter-dependencies against the IPC
+	 * layer. Also, as the SYS/BIOS needs to preserve properly the processor
+	 * register set, sending this ACK or signalling the completion of the
+	 * context save through a shared memory variable can never be the
+	 * absolute last thing to be executed on the remoteproc side, and the
+	 * MPU cannot use the ACK message as a sync point to put the remoteproc
+	 * into reset. The only way to ensure that the remote processor has
+	 * completed saving the context is to check that the module has reached
+	 * STANDBY state (after saving the context, the SYS/BIOS executes the
+	 * appropriate target-specific WFI instruction causing the module to
+	 * enter STANDBY).
+	 */
+	while (!_is_rproc_in_standby(oproc)) {
+		if (time_after(jiffies, ta))
+			return -ETIME;
+		schedule();
+	}
+
+	ret = reset_control_assert(oproc->reset);
+	if (ret) {
+		dev_err(dev, "reset assert during suspend failed %d\n", ret);
+		return ret;
+	}
+
+	ret = omap_rproc_disable_timers(rproc, false);
+	if (ret) {
+		dev_err(dev, "disabling timers during suspend failed %d\n",
+			ret);
+		goto enable_device;
+	}
+
+	/*
+	 * IOMMUs would have to be disabled specifically for runtime suspend.
+	 * They are handled automatically through System PM callbacks for
+	 * regular system suspend
+	 */
+	if (auto_suspend) {
+		ret = omap_iommu_domain_deactivate(rproc->domain);
+		if (ret) {
+			dev_err(dev, "iommu domain deactivate failed %d\n",
+				ret);
+			goto enable_timers;
+		}
+	}
+
+	return 0;
+
+enable_timers:
+	/* ignore errors on re-enabling code */
+	omap_rproc_enable_timers(rproc, false);
+enable_device:
+	reset_control_deassert(oproc->reset);
+	return ret;
+}
+
+static int _omap_rproc_resume(struct rproc *rproc, bool auto_suspend)
+{
+	struct device *dev = rproc->dev.parent;
+	struct omap_rproc *oproc = rproc->priv;
+	int ret;
+
+	/*
+	 * IOMMUs would have to be enabled specifically for runtime resume.
+	 * They would have been already enabled automatically through System
+	 * PM callbacks for regular system resume
+	 */
+	if (auto_suspend) {
+		ret = omap_iommu_domain_activate(rproc->domain);
+		if (ret) {
+			dev_err(dev, "omap_iommu activate failed %d\n", ret);
+			goto out;
+		}
+	}
+
+	/* boot address could be lost after suspend, so restore it */
+	if (oproc->boot_data) {
+		ret = omap_rproc_write_dsp_boot_addr(rproc);
+		if (ret) {
+			dev_err(dev, "boot address restore failed %d\n", ret);
+			goto suspend_iommu;
+		}
+	}
+
+	ret = omap_rproc_enable_timers(rproc, false);
+	if (ret) {
+		dev_err(dev, "enabling timers during resume failed %d\n", ret);
+		goto suspend_iommu;
+	}
+
+	ret = reset_control_deassert(oproc->reset);
+	if (ret) {
+		dev_err(dev, "reset deassert during resume failed %d\n", ret);
+		goto disable_timers;
+	}
+
+	return 0;
+
+disable_timers:
+	omap_rproc_disable_timers(rproc, false);
+suspend_iommu:
+	if (auto_suspend)
+		omap_iommu_domain_deactivate(rproc->domain);
+out:
+	return ret;
+}
+
+static int __maybe_unused omap_rproc_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct rproc *rproc = platform_get_drvdata(pdev);
+	struct omap_rproc *oproc = rproc->priv;
+	int ret = 0;
+
+	mutex_lock(&rproc->lock);
+	if (rproc->state == RPROC_OFFLINE)
+		goto out;
+
+	if (rproc->state == RPROC_SUSPENDED)
+		goto out;
+
+	if (rproc->state != RPROC_RUNNING) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	ret = _omap_rproc_suspend(rproc, false);
+	if (ret) {
+		dev_err(dev, "suspend failed %d\n", ret);
+		goto out;
+	}
+
+	/*
+	 * remoteproc is running at the time of system suspend, so remember
+	 * it so as to wake it up during system resume
+	 */
+	oproc->need_resume = true;
+	rproc->state = RPROC_SUSPENDED;
+
+out:
+	mutex_unlock(&rproc->lock);
+	return ret;
+}
+
+static int __maybe_unused omap_rproc_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct rproc *rproc = platform_get_drvdata(pdev);
+	struct omap_rproc *oproc = rproc->priv;
+	int ret = 0;
+
+	mutex_lock(&rproc->lock);
+	if (rproc->state == RPROC_OFFLINE)
+		goto out;
+
+	if (rproc->state != RPROC_SUSPENDED) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	/*
+	 * remoteproc was auto-suspended at the time of system suspend,
+	 * so no need to wake-up the processor (leave it in suspended
+	 * state, will be woken up during a subsequent runtime_resume)
+	 */
+	if (!oproc->need_resume)
+		goto out;
+
+	ret = _omap_rproc_resume(rproc, false);
+	if (ret) {
+		dev_err(dev, "resume failed %d\n", ret);
+		goto out;
+	}
+
+	oproc->need_resume = false;
+	rproc->state = RPROC_RUNNING;
+
+	pm_runtime_mark_last_busy(dev);
+out:
+	mutex_unlock(&rproc->lock);
+	return ret;
+}
+
+static int omap_rproc_runtime_suspend(struct device *dev)
+{
+	struct rproc *rproc = dev_get_drvdata(dev);
+	struct omap_rproc *oproc = rproc->priv;
+	int ret;
+
+	mutex_lock(&rproc->lock);
+	if (rproc->state == RPROC_CRASHED) {
+		dev_dbg(dev, "rproc cannot be runtime suspended when crashed!\n");
+		ret = -EBUSY;
+		goto out;
+	}
+
+	if (WARN_ON(rproc->state != RPROC_RUNNING)) {
+		dev_err(dev, "rproc cannot be runtime suspended when not running!\n");
+		ret = -EBUSY;
+		goto out;
+	}
+
+	/*
+	 * do not even attempt suspend if the remote processor is not
+	 * idled for runtime auto-suspend
+	 */
+	if (!_is_rproc_in_standby(oproc)) {
+		ret = -EBUSY;
+		goto abort;
+	}
+
+	ret = _omap_rproc_suspend(rproc, true);
+	if (ret)
+		goto abort;
+
+	rproc->state = RPROC_SUSPENDED;
+	mutex_unlock(&rproc->lock);
+	return 0;
+
+abort:
+	pm_runtime_mark_last_busy(dev);
+out:
+	mutex_unlock(&rproc->lock);
+	return ret;
+}
+
+static int omap_rproc_runtime_resume(struct device *dev)
+{
+	struct rproc *rproc = dev_get_drvdata(dev);
+	int ret;
+
+	mutex_lock(&rproc->lock);
+	if (WARN_ON(rproc->state != RPROC_SUSPENDED)) {
+		dev_err(dev, "rproc cannot be runtime resumed if not suspended! state=%d\n",
+			rproc->state);
+		ret = -EBUSY;
+		goto out;
+	}
+
+	ret = _omap_rproc_resume(rproc, true);
+	if (ret) {
+		dev_err(dev, "runtime resume failed %d\n", ret);
+		goto out;
+	}
+
+	rproc->state = RPROC_RUNNING;
+out:
+	mutex_unlock(&rproc->lock);
+	return ret;
+}
+#endif /* CONFIG_PM */
+
+static const struct omap_rproc_mem_data ipu_mems[] = {
+	{ .name = "l2ram", .dev_addr = 0x20000000 },
+	{ },
+};
+
+static const struct omap_rproc_mem_data dra7_dsp_mems[] = {
+	{ .name = "l2ram", .dev_addr = 0x800000 },
+	{ .name = "l1pram", .dev_addr = 0xe00000 },
+	{ .name = "l1dram", .dev_addr = 0xf00000 },
+	{ },
+};
+
+static const struct omap_rproc_dev_data omap4_dsp_dev_data = {
+	.device_name	= "dsp",
+};
+
+static const struct omap_rproc_dev_data omap4_ipu_dev_data = {
+	.device_name	= "ipu",
+	.mems		= ipu_mems,
+};
+
+static const struct omap_rproc_dev_data omap5_dsp_dev_data = {
+	.device_name	= "dsp",
+};
+
+static const struct omap_rproc_dev_data omap5_ipu_dev_data = {
+	.device_name	= "ipu",
+	.mems		= ipu_mems,
+};
+
+static const struct omap_rproc_dev_data dra7_dsp_dev_data = {
+	.device_name	= "dsp",
+	.mems		= dra7_dsp_mems,
+};
+
+static const struct omap_rproc_dev_data dra7_ipu_dev_data = {
+	.device_name	= "ipu",
+	.mems		= ipu_mems,
+};
+
+static const struct of_device_id omap_rproc_of_match[] = {
+	{
+		.compatible     = "ti,omap4-dsp",
+		.data           = &omap4_dsp_dev_data,
+	},
+	{
+		.compatible     = "ti,omap4-ipu",
+		.data           = &omap4_ipu_dev_data,
+	},
+	{
+		.compatible     = "ti,omap5-dsp",
+		.data           = &omap5_dsp_dev_data,
+	},
+	{
+		.compatible     = "ti,omap5-ipu",
+		.data           = &omap5_ipu_dev_data,
+	},
+	{
+		.compatible     = "ti,dra7-dsp",
+		.data           = &dra7_dsp_dev_data,
+	},
+	{
+		.compatible     = "ti,dra7-ipu",
+		.data           = &dra7_ipu_dev_data,
+	},
+	{
+		/* end */
+	},
+};
+MODULE_DEVICE_TABLE(of, omap_rproc_of_match);
+
+static const char *omap_rproc_get_firmware(struct platform_device *pdev)
+{
+	const char *fw_name;
+	int ret;
+
+	ret = of_property_read_string(pdev->dev.of_node, "firmware-name",
+				      &fw_name);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return fw_name;
+}
+
+static int omap_rproc_get_boot_data(struct platform_device *pdev,
+				    struct rproc *rproc)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct omap_rproc *oproc = rproc->priv;
+	const struct omap_rproc_dev_data *data;
+	int ret;
+
+	data = of_device_get_match_data(&pdev->dev);
+	if (!data)
+		return -ENODEV;
+
+	if (!of_property_read_bool(np, "ti,bootreg"))
+		return 0;
+
+	oproc->boot_data = devm_kzalloc(&pdev->dev, sizeof(*oproc->boot_data),
+					GFP_KERNEL);
+	if (!oproc->boot_data)
+		return -ENOMEM;
+
+	oproc->boot_data->syscon =
+			syscon_regmap_lookup_by_phandle(np, "ti,bootreg");
+	if (IS_ERR(oproc->boot_data->syscon)) {
+		ret = PTR_ERR(oproc->boot_data->syscon);
+		return ret;
+	}
+
+	if (of_property_read_u32_index(np, "ti,bootreg", 1,
+				       &oproc->boot_data->boot_reg)) {
+		dev_err(&pdev->dev, "couldn't get the boot register\n");
+		return -EINVAL;
+	}
+
+	of_property_read_u32_index(np, "ti,bootreg", 2,
+				   &oproc->boot_data->boot_reg_shift);
+
+	return 0;
+}
+
+static int omap_rproc_of_get_internal_memories(struct platform_device *pdev,
+					       struct rproc *rproc)
+{
+	struct omap_rproc *oproc = rproc->priv;
+	struct device *dev = &pdev->dev;
+	const struct omap_rproc_dev_data *data;
+	struct resource *res;
+	int num_mems;
+	int i;
+
+	data = of_device_get_match_data(dev);
+	if (!data)
+		return -ENODEV;
+
+	if (!data->mems)
+		return 0;
+
+	num_mems = of_property_count_elems_of_size(dev->of_node, "reg",
+						   sizeof(u32)) / 2;
+
+	oproc->mem = devm_kcalloc(dev, num_mems, sizeof(*oproc->mem),
+				  GFP_KERNEL);
+	if (!oproc->mem)
+		return -ENOMEM;
+
+	for (i = 0; data->mems[i].name; i++) {
+		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+						   data->mems[i].name);
+		if (!res) {
+			dev_err(dev, "no memory defined for %s\n",
+				data->mems[i].name);
+			return -ENOMEM;
+		}
+		oproc->mem[i].cpu_addr = devm_ioremap_resource(dev, res);
+		if (IS_ERR(oproc->mem[i].cpu_addr)) {
+			dev_err(dev, "failed to parse and map %s memory\n",
+				data->mems[i].name);
+			return PTR_ERR(oproc->mem[i].cpu_addr);
+		}
+		oproc->mem[i].bus_addr = res->start;
+		oproc->mem[i].dev_addr = data->mems[i].dev_addr;
+		oproc->mem[i].size = resource_size(res);
+
+		dev_dbg(dev, "memory %8s: bus addr %pa size 0x%x va %pK da 0x%x\n",
+			data->mems[i].name, &oproc->mem[i].bus_addr,
+			oproc->mem[i].size, oproc->mem[i].cpu_addr,
+			oproc->mem[i].dev_addr);
+	}
+	oproc->num_mems = num_mems;
+
+	return 0;
+}
+
+#ifdef CONFIG_OMAP_REMOTEPROC_WATCHDOG
+static int omap_rproc_count_wdog_timers(struct device *dev)
+{
+	struct device_node *np = dev->of_node;
+	int ret;
+
+	ret = of_count_phandle_with_args(np, "ti,watchdog-timers", NULL);
+	if (ret <= 0) {
+		dev_dbg(dev, "device does not have watchdog timers, status = %d\n",
+			ret);
+		ret = 0;
+	}
+
+	return ret;
+}
+#else
+static int omap_rproc_count_wdog_timers(struct device *dev)
+{
+	return 0;
+}
+#endif
+
+static int omap_rproc_of_get_timers(struct platform_device *pdev,
+				    struct rproc *rproc)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct omap_rproc *oproc = rproc->priv;
+	struct device *dev = &pdev->dev;
+	int num_timers;
+
+	/*
+	 * Timer nodes are directly used in client nodes as phandles, so
+	 * retrieve the count using appropriate size
+	 */
+	oproc->num_timers = of_count_phandle_with_args(np, "ti,timers", NULL);
+	if (oproc->num_timers <= 0) {
+		dev_dbg(dev, "device does not have timers, status = %d\n",
+			oproc->num_timers);
+		oproc->num_timers = 0;
+	}
+
+	oproc->num_wd_timers = omap_rproc_count_wdog_timers(dev);
+
+	num_timers = oproc->num_timers + oproc->num_wd_timers;
+	if (num_timers) {
+		oproc->timers = devm_kcalloc(dev, num_timers,
+					     sizeof(*oproc->timers),
+					     GFP_KERNEL);
+		if (!oproc->timers)
+			return -ENOMEM;
+
+		dev_dbg(dev, "device has %d tick timers and %d watchdog timers\n",
+			oproc->num_timers, oproc->num_wd_timers);
+	}
+
+	return 0;
+}
+
 static int omap_rproc_probe(struct platform_device *pdev)
 {
-	struct omap_rproc_pdata *pdata = pdev->dev.platform_data;
+	struct device_node *np = pdev->dev.of_node;
 	struct omap_rproc *oproc;
 	struct rproc *rproc;
+	const char *firmware;
 	int ret;
+	struct reset_control *reset;
+
+	if (!np) {
+		dev_err(&pdev->dev, "only DT-based devices are supported\n");
+		return -ENODEV;
+	}
+
+	reset = devm_reset_control_array_get_exclusive(&pdev->dev);
+	if (IS_ERR(reset))
+		return PTR_ERR(reset);
+
+	firmware = omap_rproc_get_firmware(pdev);
+	if (IS_ERR(firmware))
+		return PTR_ERR(firmware);
 
 	ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
 	if (ret) {
@@ -188,24 +1307,60 @@ static int omap_rproc_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	rproc = rproc_alloc(&pdev->dev, pdata->name, &omap_rproc_ops,
-			    pdata->firmware, sizeof(*oproc));
+	rproc = rproc_alloc(&pdev->dev, dev_name(&pdev->dev), &omap_rproc_ops,
+			    firmware, sizeof(*oproc));
 	if (!rproc)
 		return -ENOMEM;
 
 	oproc = rproc->priv;
 	oproc->rproc = rproc;
+	oproc->reset = reset;
 	/* All existing OMAP IPU and DSP processors have an MMU */
 	rproc->has_iommu = true;
 
+	ret = omap_rproc_of_get_internal_memories(pdev, rproc);
+	if (ret)
+		goto free_rproc;
+
+	ret = omap_rproc_get_boot_data(pdev, rproc);
+	if (ret)
+		goto free_rproc;
+
+	ret = omap_rproc_of_get_timers(pdev, rproc);
+	if (ret)
+		goto free_rproc;
+
+	init_completion(&oproc->pm_comp);
+	oproc->autosuspend_delay = DEFAULT_AUTOSUSPEND_DELAY;
+
+	of_property_read_u32(pdev->dev.of_node, "ti,autosuspend-delay-ms",
+			     &oproc->autosuspend_delay);
+
+	pm_runtime_set_autosuspend_delay(&pdev->dev, oproc->autosuspend_delay);
+
+	oproc->fck = devm_clk_get(&pdev->dev, 0);
+	if (IS_ERR(oproc->fck)) {
+		ret = PTR_ERR(oproc->fck);
+		goto free_rproc;
+	}
+
+	ret = of_reserved_mem_device_init(&pdev->dev);
+	if (ret) {
+		dev_warn(&pdev->dev, "device does not have specific CMA pool.\n");
+		dev_warn(&pdev->dev, "Typically this should be provided,\n");
+		dev_warn(&pdev->dev, "only omit if you know what you are doing.\n");
+	}
+
 	platform_set_drvdata(pdev, rproc);
 
 	ret = rproc_add(rproc);
 	if (ret)
-		goto free_rproc;
+		goto release_mem;
 
 	return 0;
 
+release_mem:
+	of_reserved_mem_device_release(&pdev->dev);
 free_rproc:
 	rproc_free(rproc);
 	return ret;
@@ -217,15 +1372,24 @@ static int omap_rproc_remove(struct platform_device *pdev)
 
 	rproc_del(rproc);
 	rproc_free(rproc);
+	of_reserved_mem_device_release(&pdev->dev);
 
 	return 0;
 }
 
+static const struct dev_pm_ops omap_rproc_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(omap_rproc_suspend, omap_rproc_resume)
+	SET_RUNTIME_PM_OPS(omap_rproc_runtime_suspend,
+			   omap_rproc_runtime_resume, NULL)
+};
+
 static struct platform_driver omap_rproc_driver = {
 	.probe = omap_rproc_probe,
 	.remove = omap_rproc_remove,
 	.driver = {
 		.name = "omap-rproc",
+		.pm = &omap_rproc_pm_ops,
+		.of_match_table = omap_rproc_of_match,
 	},
 };
 
diff --git a/drivers/remoteproc/omap_remoteproc.h b/drivers/remoteproc/omap_remoteproc.h
index f6d2036..828e132 100644
--- a/drivers/remoteproc/omap_remoteproc.h
+++ b/drivers/remoteproc/omap_remoteproc.h
@@ -1,35 +1,10 @@
+/* SPDX-License-Identifier: BSD-3-Clause */
 /*
  * Remote processor messaging
  *
- * Copyright (C) 2011 Texas Instruments, Inc.
+ * Copyright (C) 2011-2020 Texas Instruments, Inc.
  * Copyright (C) 2011 Google, Inc.
  * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- *   notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- *   notice, this list of conditions and the following disclaimer in
- *   the documentation and/or other materials provided with the
- *   distribution.
- * * Neither the name Texas Instruments nor the names of its
- *   contributors may be used to endorse or promote products derived
- *   from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
 #ifndef _OMAP_RPMSG_H
@@ -56,6 +31,22 @@
  *
  * @RP_MBOX_ABORT_REQUEST: a "please crash" request, used for testing the
  * recovery mechanism (to some extent).
+ *
+ * @RP_MBOX_SUSPEND_AUTO: auto suspend request for the remote processor
+ *
+ * @RP_MBOX_SUSPEND_SYSTEM: system suspend request for the remote processor
+ *
+ * @RP_MBOX_SUSPEND_ACK: successful response from remote processor for a
+ * suspend request
+ *
+ * @RP_MBOX_SUSPEND_CANCEL: a cancel suspend response from a remote processor
+ * on a suspend request
+ *
+ * Introduce new message definitions if any here.
+ *
+ * @RP_MBOX_END_MSG: Indicates end of known/defined messages from remote core
+ * This should be the last definition.
+ *
  */
 enum omap_rp_mbox_messages {
 	RP_MBOX_READY		= 0xFFFFFF00,
@@ -64,6 +55,11 @@ enum omap_rp_mbox_messages {
 	RP_MBOX_ECHO_REQUEST	= 0xFFFFFF03,
 	RP_MBOX_ECHO_REPLY	= 0xFFFFFF04,
 	RP_MBOX_ABORT_REQUEST	= 0xFFFFFF05,
+	RP_MBOX_SUSPEND_AUTO	= 0xFFFFFF10,
+	RP_MBOX_SUSPEND_SYSTEM	= 0xFFFFFF11,
+	RP_MBOX_SUSPEND_ACK	= 0xFFFFFF12,
+	RP_MBOX_SUSPEND_CANCEL	= 0xFFFFFF13,
+	RP_MBOX_END_MSG		= 0xFFFFFF14,
 };
 
 #endif /* _OMAP_RPMSG_H */
diff --git a/drivers/remoteproc/qcom_q6v5.c b/drivers/remoteproc/qcom_q6v5.c
index cb0f4a0..111a442 100644
--- a/drivers/remoteproc/qcom_q6v5.c
+++ b/drivers/remoteproc/qcom_q6v5.c
@@ -15,6 +15,8 @@
 #include <linux/remoteproc.h>
 #include "qcom_q6v5.h"
 
+#define Q6V5_PANIC_DELAY_MS	200
+
 /**
  * qcom_q6v5_prepare() - reinitialize the qcom_q6v5 context before start
  * @q6v5:	reference to qcom_q6v5 context to be reinitialized
@@ -163,6 +165,24 @@ int qcom_q6v5_request_stop(struct qcom_q6v5 *q6v5)
 EXPORT_SYMBOL_GPL(qcom_q6v5_request_stop);
 
 /**
+ * qcom_q6v5_panic() - panic handler to invoke a stop on the remote
+ * @q6v5:	reference to qcom_q6v5 context
+ *
+ * Set the stop bit and sleep in order to allow the remote processor to flush
+ * its caches etc for post mortem debugging.
+ *
+ * Return: 200ms
+ */
+unsigned long qcom_q6v5_panic(struct qcom_q6v5 *q6v5)
+{
+	qcom_smem_state_update_bits(q6v5->state,
+				    BIT(q6v5->stop_bit), BIT(q6v5->stop_bit));
+
+	return Q6V5_PANIC_DELAY_MS;
+}
+EXPORT_SYMBOL_GPL(qcom_q6v5_panic);
+
+/**
  * qcom_q6v5_init() - initializer of the q6v5 common struct
  * @q6v5:	handle to be initialized
  * @pdev:	platform_device reference for acquiring resources
diff --git a/drivers/remoteproc/qcom_q6v5.h b/drivers/remoteproc/qcom_q6v5.h
index 7ac92c1..c4ed887 100644
--- a/drivers/remoteproc/qcom_q6v5.h
+++ b/drivers/remoteproc/qcom_q6v5.h
@@ -42,5 +42,6 @@ int qcom_q6v5_prepare(struct qcom_q6v5 *q6v5);
 int qcom_q6v5_unprepare(struct qcom_q6v5 *q6v5);
 int qcom_q6v5_request_stop(struct qcom_q6v5 *q6v5);
 int qcom_q6v5_wait_for_start(struct qcom_q6v5 *q6v5, int timeout);
+unsigned long qcom_q6v5_panic(struct qcom_q6v5 *q6v5);
 
 #endif
diff --git a/drivers/remoteproc/qcom_q6v5_adsp.c b/drivers/remoteproc/qcom_q6v5_adsp.c
index e953886..24a3db9 100644
--- a/drivers/remoteproc/qcom_q6v5_adsp.c
+++ b/drivers/remoteproc/qcom_q6v5_adsp.c
@@ -270,7 +270,7 @@ static int adsp_stop(struct rproc *rproc)
 	return ret;
 }
 
-static void *adsp_da_to_va(struct rproc *rproc, u64 da, int len)
+static void *adsp_da_to_va(struct rproc *rproc, u64 da, size_t len)
 {
 	struct qcom_adsp *adsp = (struct qcom_adsp *)rproc->priv;
 	int offset;
@@ -282,12 +282,20 @@ static void *adsp_da_to_va(struct rproc *rproc, u64 da, int len)
 	return adsp->mem_region + offset;
 }
 
+static unsigned long adsp_panic(struct rproc *rproc)
+{
+	struct qcom_adsp *adsp = rproc->priv;
+
+	return qcom_q6v5_panic(&adsp->q6v5);
+}
+
 static const struct rproc_ops adsp_ops = {
 	.start = adsp_start,
 	.stop = adsp_stop,
 	.da_to_va = adsp_da_to_va,
 	.parse_fw = qcom_register_dump_segments,
 	.load = adsp_load,
+	.panic = adsp_panic,
 };
 
 static int adsp_init_clock(struct qcom_adsp *adsp, const char **clk_ids)
diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index f9ccce7..ce49c32 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -381,23 +381,33 @@ static void q6v5_pds_disable(struct q6v5 *qproc, struct device **pds,
 }
 
 static int q6v5_xfer_mem_ownership(struct q6v5 *qproc, int *current_perm,
-				   bool remote_owner, phys_addr_t addr,
+				   bool local, bool remote, phys_addr_t addr,
 				   size_t size)
 {
-	struct qcom_scm_vmperm next;
+	struct qcom_scm_vmperm next[2];
+	int perms = 0;
 
 	if (!qproc->need_mem_protection)
 		return 0;
-	if (remote_owner && *current_perm == BIT(QCOM_SCM_VMID_MSS_MSA))
-		return 0;
-	if (!remote_owner && *current_perm == BIT(QCOM_SCM_VMID_HLOS))
+
+	if (local == !!(*current_perm & BIT(QCOM_SCM_VMID_HLOS)) &&
+	    remote == !!(*current_perm & BIT(QCOM_SCM_VMID_MSS_MSA)))
 		return 0;
 
-	next.vmid = remote_owner ? QCOM_SCM_VMID_MSS_MSA : QCOM_SCM_VMID_HLOS;
-	next.perm = remote_owner ? QCOM_SCM_PERM_RW : QCOM_SCM_PERM_RWX;
+	if (local) {
+		next[perms].vmid = QCOM_SCM_VMID_HLOS;
+		next[perms].perm = QCOM_SCM_PERM_RWX;
+		perms++;
+	}
+
+	if (remote) {
+		next[perms].vmid = QCOM_SCM_VMID_MSS_MSA;
+		next[perms].perm = QCOM_SCM_PERM_RW;
+		perms++;
+	}
 
 	return qcom_scm_assign_mem(addr, ALIGN(size, SZ_4K),
-				   current_perm, &next, 1);
+				   current_perm, next, perms);
 }
 
 static int q6v5_load(struct rproc *rproc, const struct firmware *fw)
@@ -803,7 +813,8 @@ static int q6v5_mpss_init_image(struct q6v5 *qproc, const struct firmware *fw)
 
 	/* Hypervisor mapping to access metadata by modem */
 	mdata_perm = BIT(QCOM_SCM_VMID_HLOS);
-	ret = q6v5_xfer_mem_ownership(qproc, &mdata_perm, true, phys, size);
+	ret = q6v5_xfer_mem_ownership(qproc, &mdata_perm, false, true,
+				      phys, size);
 	if (ret) {
 		dev_err(qproc->dev,
 			"assigning Q6 access to metadata failed: %d\n", ret);
@@ -821,7 +832,8 @@ static int q6v5_mpss_init_image(struct q6v5 *qproc, const struct firmware *fw)
 		dev_err(qproc->dev, "MPSS header authentication failed: %d\n", ret);
 
 	/* Metadata authentication done, remove modem access */
-	xferop_ret = q6v5_xfer_mem_ownership(qproc, &mdata_perm, false, phys, size);
+	xferop_ret = q6v5_xfer_mem_ownership(qproc, &mdata_perm, true, false,
+					     phys, size);
 	if (xferop_ret)
 		dev_warn(qproc->dev,
 			 "mdt buffer not reclaimed system may become unstable\n");
@@ -908,7 +920,7 @@ static int q6v5_mba_load(struct q6v5 *qproc)
 	}
 
 	/* Assign MBA image access in DDR to q6 */
-	ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, true,
+	ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, false, true,
 				      qproc->mba_phys, qproc->mba_size);
 	if (ret) {
 		dev_err(qproc->dev,
@@ -945,8 +957,8 @@ static int q6v5_mba_load(struct q6v5 *qproc)
 	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_nc);
 
 reclaim_mba:
-	xfermemop_ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, false,
-						qproc->mba_phys,
+	xfermemop_ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, true,
+						false, qproc->mba_phys,
 						qproc->mba_size);
 	if (xfermemop_ret) {
 		dev_err(qproc->dev,
@@ -1003,11 +1015,6 @@ static void q6v5_mba_reclaim(struct q6v5 *qproc)
 		writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
 	}
 
-	ret = q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm,
-				      false, qproc->mpss_phys,
-				      qproc->mpss_size);
-	WARN_ON(ret);
-
 	q6v5_reset_assert(qproc);
 
 	q6v5_clk_disable(qproc->dev, qproc->reset_clks,
@@ -1021,7 +1028,7 @@ static void q6v5_mba_reclaim(struct q6v5 *qproc)
 	/* In case of failure or coredump scenario where reclaiming MBA memory
 	 * could not happen reclaim it here.
 	 */
-	ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, false,
+	ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, true, false,
 				      qproc->mba_phys,
 				      qproc->mba_size);
 	WARN_ON(ret);
@@ -1037,6 +1044,23 @@ static void q6v5_mba_reclaim(struct q6v5 *qproc)
 	}
 }
 
+static int q6v5_reload_mba(struct rproc *rproc)
+{
+	struct q6v5 *qproc = rproc->priv;
+	const struct firmware *fw;
+	int ret;
+
+	ret = request_firmware(&fw, rproc->firmware, qproc->dev);
+	if (ret < 0)
+		return ret;
+
+	q6v5_load(rproc, fw);
+	ret = q6v5_mba_load(qproc);
+	release_firmware(fw);
+
+	return ret;
+}
+
 static int q6v5_mpss_load(struct q6v5 *qproc)
 {
 	const struct elf32_phdr *phdrs;
@@ -1048,6 +1072,7 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
 	phys_addr_t boot_addr;
 	phys_addr_t min_addr = PHYS_ADDR_MAX;
 	phys_addr_t max_addr = 0;
+	u32 code_length;
 	bool relocate = false;
 	char *fw_name;
 	size_t fw_name_len;
@@ -1097,6 +1122,24 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
 			max_addr = ALIGN(phdr->p_paddr + phdr->p_memsz, SZ_4K);
 	}
 
+	/**
+	 * In case of a modem subsystem restart on secure devices, the modem
+	 * memory can be reclaimed only after MBA is loaded. For modem cold
+	 * boot this will be a nop
+	 */
+	q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, true, false,
+				qproc->mpss_phys, qproc->mpss_size);
+
+	/* Share ownership between Linux and MSS, during segment loading */
+	ret = q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, true, true,
+				      qproc->mpss_phys, qproc->mpss_size);
+	if (ret) {
+		dev_err(qproc->dev,
+			"assigning Q6 access to mpss memory failed: %d\n", ret);
+		ret = -EAGAIN;
+		goto release_firmware;
+	}
+
 	mpss_reloc = relocate ? min_addr : qproc->mpss_phys;
 	qproc->mpss_reloc = mpss_reloc;
 	/* Load firmware segments */
@@ -1145,10 +1188,25 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
 			       phdr->p_memsz - phdr->p_filesz);
 		}
 		size += phdr->p_memsz;
+
+		code_length = readl(qproc->rmb_base + RMB_PMI_CODE_LENGTH_REG);
+		if (!code_length) {
+			boot_addr = relocate ? qproc->mpss_phys : min_addr;
+			writel(boot_addr, qproc->rmb_base + RMB_PMI_CODE_START_REG);
+			writel(RMB_CMD_LOAD_READY, qproc->rmb_base + RMB_MBA_COMMAND_REG);
+		}
+		writel(size, qproc->rmb_base + RMB_PMI_CODE_LENGTH_REG);
+
+		ret = readl(qproc->rmb_base + RMB_MBA_STATUS_REG);
+		if (ret < 0) {
+			dev_err(qproc->dev, "MPSS authentication failed: %d\n",
+				ret);
+			goto release_firmware;
+		}
 	}
 
 	/* Transfer ownership of modem ddr region to q6 */
-	ret = q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, true,
+	ret = q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, false, true,
 				      qproc->mpss_phys, qproc->mpss_size);
 	if (ret) {
 		dev_err(qproc->dev,
@@ -1157,11 +1215,6 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
 		goto release_firmware;
 	}
 
-	boot_addr = relocate ? qproc->mpss_phys : min_addr;
-	writel(boot_addr, qproc->rmb_base + RMB_PMI_CODE_START_REG);
-	writel(RMB_CMD_LOAD_READY, qproc->rmb_base + RMB_MBA_COMMAND_REG);
-	writel(size, qproc->rmb_base + RMB_PMI_CODE_LENGTH_REG);
-
 	ret = q6v5_rmb_mba_wait(qproc, RMB_MBA_AUTH_COMPLETE, 10000);
 	if (ret == -ETIMEDOUT)
 		dev_err(qproc->dev, "MPSS authentication timed out\n");
@@ -1186,8 +1239,16 @@ static void qcom_q6v5_dump_segment(struct rproc *rproc,
 	void *ptr = rproc_da_to_va(rproc, segment->da, segment->size);
 
 	/* Unlock mba before copying segments */
-	if (!qproc->dump_mba_loaded)
-		ret = q6v5_mba_load(qproc);
+	if (!qproc->dump_mba_loaded) {
+		ret = q6v5_reload_mba(rproc);
+		if (!ret) {
+			/* Reset ownership back to Linux to copy segments */
+			ret = q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm,
+						      true, false,
+						      qproc->mpss_phys,
+						      qproc->mpss_size);
+		}
+	}
 
 	if (!ptr || ret)
 		memset(dest, 0xff, segment->size);
@@ -1198,8 +1259,14 @@ static void qcom_q6v5_dump_segment(struct rproc *rproc,
 
 	/* Reclaim mba after copying segments */
 	if (qproc->dump_segment_mask == qproc->dump_complete_mask) {
-		if (qproc->dump_mba_loaded)
+		if (qproc->dump_mba_loaded) {
+			/* Try to reset ownership back to Q6 */
+			q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm,
+						false, true,
+						qproc->mpss_phys,
+						qproc->mpss_size);
 			q6v5_mba_reclaim(qproc);
+		}
 	}
 }
 
@@ -1225,8 +1292,8 @@ static int q6v5_start(struct rproc *rproc)
 		goto reclaim_mpss;
 	}
 
-	xfermemop_ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, false,
-						qproc->mba_phys,
+	xfermemop_ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, true,
+						false, qproc->mba_phys,
 						qproc->mba_size);
 	if (xfermemop_ret)
 		dev_err(qproc->dev,
@@ -1239,10 +1306,6 @@ static int q6v5_start(struct rproc *rproc)
 	return 0;
 
 reclaim_mpss:
-	xfermemop_ret = q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm,
-						false, qproc->mpss_phys,
-						qproc->mpss_size);
-	WARN_ON(xfermemop_ret);
 	q6v5_mba_reclaim(qproc);
 
 	return ret;
@@ -1264,7 +1327,7 @@ static int q6v5_stop(struct rproc *rproc)
 	return 0;
 }
 
-static void *q6v5_da_to_va(struct rproc *rproc, u64 da, int len)
+static void *q6v5_da_to_va(struct rproc *rproc, u64 da, size_t len)
 {
 	struct q6v5 *qproc = rproc->priv;
 	int offset;
diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
index edf9d0e..7a63efb 100644
--- a/drivers/remoteproc/qcom_q6v5_pas.c
+++ b/drivers/remoteproc/qcom_q6v5_pas.c
@@ -222,7 +222,7 @@ static int adsp_stop(struct rproc *rproc)
 	return ret;
 }
 
-static void *adsp_da_to_va(struct rproc *rproc, u64 da, int len)
+static void *adsp_da_to_va(struct rproc *rproc, u64 da, size_t len)
 {
 	struct qcom_adsp *adsp = (struct qcom_adsp *)rproc->priv;
 	int offset;
@@ -234,12 +234,20 @@ static void *adsp_da_to_va(struct rproc *rproc, u64 da, int len)
 	return adsp->mem_region + offset;
 }
 
+static unsigned long adsp_panic(struct rproc *rproc)
+{
+	struct qcom_adsp *adsp = (struct qcom_adsp *)rproc->priv;
+
+	return qcom_q6v5_panic(&adsp->q6v5);
+}
+
 static const struct rproc_ops adsp_ops = {
 	.start = adsp_start,
 	.stop = adsp_stop,
 	.da_to_va = adsp_da_to_va,
 	.parse_fw = qcom_register_dump_segments,
 	.load = adsp_load,
+	.panic = adsp_panic,
 };
 
 static int adsp_init_clock(struct qcom_adsp *adsp)
diff --git a/drivers/remoteproc/qcom_q6v5_wcss.c b/drivers/remoteproc/qcom_q6v5_wcss.c
index f93e1e4..f1924b7 100644
--- a/drivers/remoteproc/qcom_q6v5_wcss.c
+++ b/drivers/remoteproc/qcom_q6v5_wcss.c
@@ -406,7 +406,7 @@ static int q6v5_wcss_stop(struct rproc *rproc)
 	return 0;
 }
 
-static void *q6v5_wcss_da_to_va(struct rproc *rproc, u64 da, int len)
+static void *q6v5_wcss_da_to_va(struct rproc *rproc, u64 da, size_t len)
 {
 	struct q6v5_wcss *wcss = rproc->priv;
 	int offset;
diff --git a/drivers/remoteproc/qcom_wcnss.c b/drivers/remoteproc/qcom_wcnss.c
index dc13575..0c7afd0 100644
--- a/drivers/remoteproc/qcom_wcnss.c
+++ b/drivers/remoteproc/qcom_wcnss.c
@@ -287,7 +287,7 @@ static int wcnss_stop(struct rproc *rproc)
 	return ret;
 }
 
-static void *wcnss_da_to_va(struct rproc *rproc, u64 da, int len)
+static void *wcnss_da_to_va(struct rproc *rproc, u64 da, size_t len)
 {
 	struct qcom_wcnss *wcnss = (struct qcom_wcnss *)rproc->priv;
 	int offset;
diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index 097f33e..e12a54e 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -16,6 +16,7 @@
 
 #define pr_fmt(fmt)    "%s: " fmt, __func__
 
+#include <linux/delay.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/device.h>
@@ -26,6 +27,7 @@
 #include <linux/string.h>
 #include <linux/debugfs.h>
 #include <linux/devcoredump.h>
+#include <linux/rculist.h>
 #include <linux/remoteproc.h>
 #include <linux/iommu.h>
 #include <linux/idr.h>
@@ -38,11 +40,13 @@
 #include <linux/platform_device.h>
 
 #include "remoteproc_internal.h"
+#include "remoteproc_elf_helpers.h"
 
 #define HIGH_BITS_MASK 0xFFFFFFFF00000000ULL
 
 static DEFINE_MUTEX(rproc_list_mutex);
 static LIST_HEAD(rproc_list);
+static struct notifier_block rproc_panic_nb;
 
 typedef int (*rproc_handle_resource_t)(struct rproc *rproc,
 				 void *, int offset, int avail);
@@ -185,7 +189,7 @@ EXPORT_SYMBOL(rproc_va_to_pa);
  * here the output of the DMA API for the carveouts, which should be more
  * correct.
  */
-void *rproc_da_to_va(struct rproc *rproc, u64 da, int len)
+void *rproc_da_to_va(struct rproc *rproc, u64 da, size_t len)
 {
 	struct rproc_mem_entry *carveout;
 	void *ptr = NULL;
@@ -224,7 +228,8 @@ EXPORT_SYMBOL(rproc_da_to_va);
 /**
  * rproc_find_carveout_by_name() - lookup the carveout region by a name
  * @rproc: handle of a remote processor
- * @name,..: carveout name to find (standard printf format)
+ * @name: carveout name to find (format string)
+ * @...: optional parameters matching @name string
  *
  * Platform driver has the capability to register some pre-allacoted carveout
  * (physically contiguous memory regions) before rproc firmware loading and
@@ -318,8 +323,9 @@ int rproc_alloc_vring(struct rproc_vdev *rvdev, int i)
 	struct device *dev = &rproc->dev;
 	struct rproc_vring *rvring = &rvdev->vring[i];
 	struct fw_rsc_vdev *rsc;
-	int ret, size, notifyid;
+	int ret, notifyid;
 	struct rproc_mem_entry *mem;
+	size_t size;
 
 	/* actual size of vring (in bytes) */
 	size = PAGE_ALIGN(vring_size(rvring->len, rvring->align));
@@ -445,6 +451,7 @@ static void rproc_rvdev_release(struct device *dev)
  * rproc_handle_vdev() - handle a vdev fw resource
  * @rproc: the remote processor
  * @rsc: the vring resource descriptor
+ * @offset: offset of the resource entry
  * @avail: size of available data (for sanity checking the image)
  *
  * This resource entry requests the host to statically register a virtio
@@ -587,6 +594,7 @@ void rproc_vdev_release(struct kref *ref)
  * rproc_handle_trace() - handle a shared trace buffer resource
  * @rproc: the remote processor
  * @rsc: the trace resource descriptor
+ * @offset: offset of the resource entry
  * @avail: size of available data (for sanity checking the image)
  *
  * In case the remote processor dumps trace logs into memory,
@@ -652,6 +660,7 @@ static int rproc_handle_trace(struct rproc *rproc, struct fw_rsc_trace *rsc,
  * rproc_handle_devmem() - handle devmem resource entry
  * @rproc: remote processor handle
  * @rsc: the devmem resource entry
+ * @offset: offset of the resource entry
  * @avail: size of available data (for sanity checking the image)
  *
  * Remote processors commonly need to access certain on-chip peripherals.
@@ -746,11 +755,12 @@ static int rproc_alloc_carveout(struct rproc *rproc,
 	va = dma_alloc_coherent(dev->parent, mem->len, &dma, GFP_KERNEL);
 	if (!va) {
 		dev_err(dev->parent,
-			"failed to allocate dma memory: len 0x%x\n", mem->len);
+			"failed to allocate dma memory: len 0x%zx\n",
+			mem->len);
 		return -ENOMEM;
 	}
 
-	dev_dbg(dev, "carveout va %pK, dma %pad, len 0x%x\n",
+	dev_dbg(dev, "carveout va %pK, dma %pad, len 0x%zx\n",
 		va, &dma, mem->len);
 
 	if (mem->da != FW_RSC_ADDR_ANY && !rproc->domain) {
@@ -853,6 +863,7 @@ static int rproc_release_carveout(struct rproc *rproc,
  * rproc_handle_carveout() - handle phys contig memory allocation requests
  * @rproc: rproc handle
  * @rsc: the resource entry
+ * @offset: offset of the resource entry
  * @avail: size of available data (for image validation)
  *
  * This function will handle firmware requests for allocation of physically
@@ -957,7 +968,7 @@ EXPORT_SYMBOL(rproc_add_carveout);
  */
 struct rproc_mem_entry *
 rproc_mem_entry_init(struct device *dev,
-		     void *va, dma_addr_t dma, int len, u32 da,
+		     void *va, dma_addr_t dma, size_t len, u32 da,
 		     int (*alloc)(struct rproc *, struct rproc_mem_entry *),
 		     int (*release)(struct rproc *, struct rproc_mem_entry *),
 		     const char *name, ...)
@@ -999,7 +1010,7 @@ EXPORT_SYMBOL(rproc_mem_entry_init);
  * provided by client.
  */
 struct rproc_mem_entry *
-rproc_of_resm_mem_entry_init(struct device *dev, u32 of_resm_idx, int len,
+rproc_of_resm_mem_entry_init(struct device *dev, u32 of_resm_idx, size_t len,
 			     u32 da, const char *name, ...)
 {
 	struct rproc_mem_entry *mem;
@@ -1022,7 +1033,7 @@ rproc_of_resm_mem_entry_init(struct device *dev, u32 of_resm_idx, int len,
 }
 EXPORT_SYMBOL(rproc_of_resm_mem_entry_init);
 
-/**
+/*
  * A lookup table for resource handlers. The indices are defined in
  * enum fw_resource_type.
  */
@@ -1270,7 +1281,7 @@ static void rproc_resource_cleanup(struct rproc *rproc)
 		unmapped = iommu_unmap(rproc->domain, entry->da, entry->len);
 		if (unmapped != entry->len) {
 			/* nothing much to do besides complaining */
-			dev_err(dev, "failed to unmap %u/%zu\n", entry->len,
+			dev_err(dev, "failed to unmap %zx/%zu\n", entry->len,
 				unmapped);
 		}
 
@@ -1564,20 +1575,21 @@ EXPORT_SYMBOL(rproc_coredump_add_custom_segment);
 static void rproc_coredump(struct rproc *rproc)
 {
 	struct rproc_dump_segment *segment;
-	struct elf32_phdr *phdr;
-	struct elf32_hdr *ehdr;
+	void *phdr;
+	void *ehdr;
 	size_t data_size;
 	size_t offset;
 	void *data;
 	void *ptr;
+	u8 class = rproc->elf_class;
 	int phnum = 0;
 
 	if (list_empty(&rproc->dump_segments))
 		return;
 
-	data_size = sizeof(*ehdr);
+	data_size = elf_size_of_hdr(class);
 	list_for_each_entry(segment, &rproc->dump_segments, node) {
-		data_size += sizeof(*phdr) + segment->size;
+		data_size += elf_size_of_phdr(class) + segment->size;
 
 		phnum++;
 	}
@@ -1588,33 +1600,33 @@ static void rproc_coredump(struct rproc *rproc)
 
 	ehdr = data;
 
-	memset(ehdr, 0, sizeof(*ehdr));
-	memcpy(ehdr->e_ident, ELFMAG, SELFMAG);
-	ehdr->e_ident[EI_CLASS] = ELFCLASS32;
-	ehdr->e_ident[EI_DATA] = ELFDATA2LSB;
-	ehdr->e_ident[EI_VERSION] = EV_CURRENT;
-	ehdr->e_ident[EI_OSABI] = ELFOSABI_NONE;
-	ehdr->e_type = ET_CORE;
-	ehdr->e_machine = EM_NONE;
-	ehdr->e_version = EV_CURRENT;
-	ehdr->e_entry = rproc->bootaddr;
-	ehdr->e_phoff = sizeof(*ehdr);
-	ehdr->e_ehsize = sizeof(*ehdr);
-	ehdr->e_phentsize = sizeof(*phdr);
-	ehdr->e_phnum = phnum;
+	memset(ehdr, 0, elf_size_of_hdr(class));
+	/* e_ident field is common for both elf32 and elf64 */
+	elf_hdr_init_ident(ehdr, class);
 
-	phdr = data + ehdr->e_phoff;
-	offset = ehdr->e_phoff + sizeof(*phdr) * ehdr->e_phnum;
+	elf_hdr_set_e_type(class, ehdr, ET_CORE);
+	elf_hdr_set_e_machine(class, ehdr, EM_NONE);
+	elf_hdr_set_e_version(class, ehdr, EV_CURRENT);
+	elf_hdr_set_e_entry(class, ehdr, rproc->bootaddr);
+	elf_hdr_set_e_phoff(class, ehdr, elf_size_of_hdr(class));
+	elf_hdr_set_e_ehsize(class, ehdr, elf_size_of_hdr(class));
+	elf_hdr_set_e_phentsize(class, ehdr, elf_size_of_phdr(class));
+	elf_hdr_set_e_phnum(class, ehdr, phnum);
+
+	phdr = data + elf_hdr_get_e_phoff(class, ehdr);
+	offset = elf_hdr_get_e_phoff(class, ehdr);
+	offset += elf_size_of_phdr(class) * elf_hdr_get_e_phnum(class, ehdr);
+
 	list_for_each_entry(segment, &rproc->dump_segments, node) {
-		memset(phdr, 0, sizeof(*phdr));
-		phdr->p_type = PT_LOAD;
-		phdr->p_offset = offset;
-		phdr->p_vaddr = segment->da;
-		phdr->p_paddr = segment->da;
-		phdr->p_filesz = segment->size;
-		phdr->p_memsz = segment->size;
-		phdr->p_flags = PF_R | PF_W | PF_X;
-		phdr->p_align = 0;
+		memset(phdr, 0, elf_size_of_phdr(class));
+		elf_phdr_set_p_type(class, phdr, PT_LOAD);
+		elf_phdr_set_p_offset(class, phdr, offset);
+		elf_phdr_set_p_vaddr(class, phdr, segment->da);
+		elf_phdr_set_p_paddr(class, phdr, segment->da);
+		elf_phdr_set_p_filesz(class, phdr, segment->size);
+		elf_phdr_set_p_memsz(class, phdr, segment->size);
+		elf_phdr_set_p_flags(class, phdr, PF_R | PF_W | PF_X);
+		elf_phdr_set_p_align(class, phdr, 0);
 
 		if (segment->dump) {
 			segment->dump(rproc, segment, data + offset);
@@ -1630,8 +1642,8 @@ static void rproc_coredump(struct rproc *rproc)
 			}
 		}
 
-		offset += phdr->p_filesz;
-		phdr++;
+		offset += elf_phdr_get_p_filesz(class, phdr);
+		phdr += elf_size_of_phdr(class);
 	}
 
 	dev_coredumpv(&rproc->dev, data, data_size, GFP_KERNEL);
@@ -1653,12 +1665,16 @@ int rproc_trigger_recovery(struct rproc *rproc)
 	struct device *dev = &rproc->dev;
 	int ret;
 
-	dev_err(dev, "recovering %s\n", rproc->name);
-
 	ret = mutex_lock_interruptible(&rproc->lock);
 	if (ret)
 		return ret;
 
+	/* State could have changed before we got the mutex */
+	if (rproc->state != RPROC_CRASHED)
+		goto unlock_mutex;
+
+	dev_err(dev, "recovering %s\n", rproc->name);
+
 	ret = rproc_stop(rproc, true);
 	if (ret)
 		goto unlock_mutex;
@@ -1685,6 +1701,7 @@ int rproc_trigger_recovery(struct rproc *rproc)
 
 /**
  * rproc_crash_handler_work() - handle a crash
+ * @work: work treating the crash
  *
  * This function needs to handle everything related to a crash, like cpu
  * registers and stack dump, information to help to debug the fatal error, etc.
@@ -1854,8 +1871,8 @@ struct rproc *rproc_get_by_phandle(phandle phandle)
 	if (!np)
 		return NULL;
 
-	mutex_lock(&rproc_list_mutex);
-	list_for_each_entry(r, &rproc_list, node) {
+	rcu_read_lock();
+	list_for_each_entry_rcu(r, &rproc_list, node) {
 		if (r->dev.parent && r->dev.parent->of_node == np) {
 			/* prevent underlying implementation from being removed */
 			if (!try_module_get(r->dev.parent->driver->owner)) {
@@ -1868,7 +1885,7 @@ struct rproc *rproc_get_by_phandle(phandle phandle)
 			break;
 		}
 	}
-	mutex_unlock(&rproc_list_mutex);
+	rcu_read_unlock();
 
 	of_node_put(np);
 
@@ -1925,7 +1942,7 @@ int rproc_add(struct rproc *rproc)
 
 	/* expose to rproc_get_by_phandle users */
 	mutex_lock(&rproc_list_mutex);
-	list_add(&rproc->node, &rproc_list);
+	list_add_rcu(&rproc->node, &rproc_list);
 	mutex_unlock(&rproc_list_mutex);
 
 	return 0;
@@ -2029,6 +2046,7 @@ struct rproc *rproc_alloc(struct device *dev, const char *name,
 	rproc->name = name;
 	rproc->priv = &rproc[1];
 	rproc->auto_boot = true;
+	rproc->elf_class = ELFCLASS32;
 
 	device_initialize(&rproc->dev);
 	rproc->dev.parent = dev;
@@ -2053,7 +2071,8 @@ struct rproc *rproc_alloc(struct device *dev, const char *name,
 		rproc->ops->load = rproc_elf_load_segments;
 		rproc->ops->parse_fw = rproc_elf_load_rsc_table;
 		rproc->ops->find_loaded_rsc_table = rproc_elf_find_loaded_rsc_table;
-		rproc->ops->sanity_check = rproc_elf_sanity_check;
+		if (!rproc->ops->sanity_check)
+			rproc->ops->sanity_check = rproc_elf32_sanity_check;
 		rproc->ops->get_boot_addr = rproc_elf_get_boot_addr;
 	}
 
@@ -2140,9 +2159,12 @@ int rproc_del(struct rproc *rproc)
 
 	/* the rproc is downref'ed as soon as it's removed from the klist */
 	mutex_lock(&rproc_list_mutex);
-	list_del(&rproc->node);
+	list_del_rcu(&rproc->node);
 	mutex_unlock(&rproc_list_mutex);
 
+	/* Ensure that no readers of rproc_list are still active */
+	synchronize_rcu();
+
 	device_del(&rproc->dev);
 
 	return 0;
@@ -2216,10 +2238,50 @@ void rproc_report_crash(struct rproc *rproc, enum rproc_crash_type type)
 }
 EXPORT_SYMBOL(rproc_report_crash);
 
+static int rproc_panic_handler(struct notifier_block *nb, unsigned long event,
+			       void *ptr)
+{
+	unsigned int longest = 0;
+	struct rproc *rproc;
+	unsigned int d;
+
+	rcu_read_lock();
+	list_for_each_entry_rcu(rproc, &rproc_list, node) {
+		if (!rproc->ops->panic || rproc->state != RPROC_RUNNING)
+			continue;
+
+		d = rproc->ops->panic(rproc);
+		longest = max(longest, d);
+	}
+	rcu_read_unlock();
+
+	/*
+	 * Delay for the longest requested duration before returning. This can
+	 * be used by the remoteproc drivers to give the remote processor time
+	 * to perform any requested operations (such as flush caches), when
+	 * it's not possible to signal the Linux side due to the panic.
+	 */
+	mdelay(longest);
+
+	return NOTIFY_DONE;
+}
+
+static void __init rproc_init_panic(void)
+{
+	rproc_panic_nb.notifier_call = rproc_panic_handler;
+	atomic_notifier_chain_register(&panic_notifier_list, &rproc_panic_nb);
+}
+
+static void __exit rproc_exit_panic(void)
+{
+	atomic_notifier_chain_unregister(&panic_notifier_list, &rproc_panic_nb);
+}
+
 static int __init remoteproc_init(void)
 {
 	rproc_init_sysfs();
 	rproc_init_debugfs();
+	rproc_init_panic();
 
 	return 0;
 }
@@ -2229,6 +2291,7 @@ static void __exit remoteproc_exit(void)
 {
 	ida_destroy(&rproc_dev_index);
 
+	rproc_exit_panic();
 	rproc_exit_debugfs();
 	rproc_exit_sysfs();
 }
diff --git a/drivers/remoteproc/remoteproc_debugfs.c b/drivers/remoteproc/remoteproc_debugfs.c
index dd93cf0..d734cad 100644
--- a/drivers/remoteproc/remoteproc_debugfs.c
+++ b/drivers/remoteproc/remoteproc_debugfs.c
@@ -138,16 +138,16 @@ rproc_recovery_write(struct file *filp, const char __user *user_buf,
 		buf[count - 1] = '\0';
 
 	if (!strncmp(buf, "enabled", count)) {
+		/* change the flag and begin the recovery process if needed */
 		rproc->recovery_disabled = false;
-		/* if rproc has crashed, trigger recovery */
-		if (rproc->state == RPROC_CRASHED)
-			rproc_trigger_recovery(rproc);
+		rproc_trigger_recovery(rproc);
 	} else if (!strncmp(buf, "disabled", count)) {
 		rproc->recovery_disabled = true;
 	} else if (!strncmp(buf, "recover", count)) {
-		/* if rproc has crashed, trigger recovery */
-		if (rproc->state == RPROC_CRASHED)
-			rproc_trigger_recovery(rproc);
+		/* begin the recovery process without changing the flag */
+		rproc_trigger_recovery(rproc);
+	} else {
+		return -EINVAL;
 	}
 
 	return count;
@@ -293,7 +293,7 @@ static int rproc_carveouts_show(struct seq_file *seq, void *p)
 		seq_printf(seq, "\tVirtual address: %pK\n", carveout->va);
 		seq_printf(seq, "\tDMA address: %pad\n", &carveout->dma);
 		seq_printf(seq, "\tDevice address: 0x%x\n", carveout->da);
-		seq_printf(seq, "\tLength: 0x%x Bytes\n\n", carveout->len);
+		seq_printf(seq, "\tLength: 0x%zx Bytes\n\n", carveout->len);
 	}
 
 	return 0;
@@ -349,7 +349,7 @@ void rproc_create_debug_dir(struct rproc *rproc)
 
 	debugfs_create_file("name", 0400, rproc->dbg_dir,
 			    rproc, &rproc_name_ops);
-	debugfs_create_file("recovery", 0400, rproc->dbg_dir,
+	debugfs_create_file("recovery", 0600, rproc->dbg_dir,
 			    rproc, &rproc_recovery_ops);
 	debugfs_create_file("crash", 0200, rproc->dbg_dir,
 			    rproc, &rproc_crash_ops);
diff --git a/drivers/remoteproc/remoteproc_elf_helpers.h b/drivers/remoteproc/remoteproc_elf_helpers.h
new file mode 100644
index 0000000..4b6be7b
--- /dev/null
+++ b/drivers/remoteproc/remoteproc_elf_helpers.h
@@ -0,0 +1,96 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Remote processor elf helpers defines
+ *
+ * Copyright (C) 2020 Kalray, Inc.
+ */
+
+#ifndef REMOTEPROC_ELF_LOADER_H
+#define REMOTEPROC_ELF_LOADER_H
+
+#include <linux/elf.h>
+#include <linux/types.h>
+
+/**
+ * fw_elf_get_class - Get elf class
+ * @fw: the ELF firmware image
+ *
+ * Note that we use and elf32_hdr to access the class since the start of the
+ * struct is the same for both elf class
+ *
+ * Return: elf class of the firmware
+ */
+static inline u8 fw_elf_get_class(const struct firmware *fw)
+{
+	struct elf32_hdr *ehdr = (struct elf32_hdr *)fw->data;
+
+	return ehdr->e_ident[EI_CLASS];
+}
+
+static inline void elf_hdr_init_ident(struct elf32_hdr *hdr, u8 class)
+{
+	memcpy(hdr->e_ident, ELFMAG, SELFMAG);
+	hdr->e_ident[EI_CLASS] = class;
+	hdr->e_ident[EI_DATA] = ELFDATA2LSB;
+	hdr->e_ident[EI_VERSION] = EV_CURRENT;
+	hdr->e_ident[EI_OSABI] = ELFOSABI_NONE;
+}
+
+/* Generate getter and setter for a specific elf struct/field */
+#define ELF_GEN_FIELD_GET_SET(__s, __field, __type) \
+static inline __type elf_##__s##_get_##__field(u8 class, const void *arg) \
+{ \
+	if (class == ELFCLASS32) \
+		return (__type) ((const struct elf32_##__s *) arg)->__field; \
+	else \
+		return (__type) ((const struct elf64_##__s *) arg)->__field; \
+} \
+static inline void elf_##__s##_set_##__field(u8 class, void *arg, \
+					     __type value) \
+{ \
+	if (class == ELFCLASS32) \
+		((struct elf32_##__s *) arg)->__field = (__type) value; \
+	else \
+		((struct elf64_##__s *) arg)->__field = (__type) value; \
+}
+
+ELF_GEN_FIELD_GET_SET(hdr, e_entry, u64)
+ELF_GEN_FIELD_GET_SET(hdr, e_phnum, u16)
+ELF_GEN_FIELD_GET_SET(hdr, e_shnum, u16)
+ELF_GEN_FIELD_GET_SET(hdr, e_phoff, u64)
+ELF_GEN_FIELD_GET_SET(hdr, e_shoff, u64)
+ELF_GEN_FIELD_GET_SET(hdr, e_shstrndx, u16)
+ELF_GEN_FIELD_GET_SET(hdr, e_machine, u16)
+ELF_GEN_FIELD_GET_SET(hdr, e_type, u16)
+ELF_GEN_FIELD_GET_SET(hdr, e_version, u32)
+ELF_GEN_FIELD_GET_SET(hdr, e_ehsize, u32)
+ELF_GEN_FIELD_GET_SET(hdr, e_phentsize, u16)
+
+ELF_GEN_FIELD_GET_SET(phdr, p_paddr, u64)
+ELF_GEN_FIELD_GET_SET(phdr, p_vaddr, u64)
+ELF_GEN_FIELD_GET_SET(phdr, p_filesz, u64)
+ELF_GEN_FIELD_GET_SET(phdr, p_memsz, u64)
+ELF_GEN_FIELD_GET_SET(phdr, p_type, u32)
+ELF_GEN_FIELD_GET_SET(phdr, p_offset, u64)
+ELF_GEN_FIELD_GET_SET(phdr, p_flags, u32)
+ELF_GEN_FIELD_GET_SET(phdr, p_align, u64)
+
+ELF_GEN_FIELD_GET_SET(shdr, sh_size, u64)
+ELF_GEN_FIELD_GET_SET(shdr, sh_offset, u64)
+ELF_GEN_FIELD_GET_SET(shdr, sh_name, u32)
+ELF_GEN_FIELD_GET_SET(shdr, sh_addr, u64)
+
+#define ELF_STRUCT_SIZE(__s) \
+static inline unsigned long elf_size_of_##__s(u8 class) \
+{ \
+	if (class == ELFCLASS32)\
+		return sizeof(struct elf32_##__s); \
+	else \
+		return sizeof(struct elf64_##__s); \
+}
+
+ELF_STRUCT_SIZE(shdr)
+ELF_STRUCT_SIZE(phdr)
+ELF_STRUCT_SIZE(hdr)
+
+#endif /* REMOTEPROC_ELF_LOADER_H */
diff --git a/drivers/remoteproc/remoteproc_elf_loader.c b/drivers/remoteproc/remoteproc_elf_loader.c
index 606aae1..16e2c49 100644
--- a/drivers/remoteproc/remoteproc_elf_loader.c
+++ b/drivers/remoteproc/remoteproc_elf_loader.c
@@ -23,20 +23,29 @@
 #include <linux/elf.h>
 
 #include "remoteproc_internal.h"
+#include "remoteproc_elf_helpers.h"
 
 /**
- * rproc_elf_sanity_check() - Sanity Check ELF firmware image
+ * rproc_elf_sanity_check() - Sanity Check for ELF32/ELF64 firmware image
  * @rproc: the remote processor handle
  * @fw: the ELF firmware image
  *
- * Make sure this fw image is sane.
+ * Make sure this fw image is sane (ie a correct ELF32/ELF64 file).
  */
 int rproc_elf_sanity_check(struct rproc *rproc, const struct firmware *fw)
 {
 	const char *name = rproc->firmware;
 	struct device *dev = &rproc->dev;
+	/*
+	 * Elf files are beginning with the same structure. Thus, to simplify
+	 * header parsing, we can use the elf32_hdr one for both elf64 and
+	 * elf32.
+	 */
 	struct elf32_hdr *ehdr;
+	u32 elf_shdr_get_size;
+	u64 phoff, shoff;
 	char class;
+	u16 phnum;
 
 	if (!fw) {
 		dev_err(dev, "failed to load %s\n", name);
@@ -50,13 +59,22 @@ int rproc_elf_sanity_check(struct rproc *rproc, const struct firmware *fw)
 
 	ehdr = (struct elf32_hdr *)fw->data;
 
-	/* We only support ELF32 at this point */
+	if (memcmp(ehdr->e_ident, ELFMAG, SELFMAG)) {
+		dev_err(dev, "Image is corrupted (bad magic)\n");
+		return -EINVAL;
+	}
+
 	class = ehdr->e_ident[EI_CLASS];
-	if (class != ELFCLASS32) {
+	if (class != ELFCLASS32 && class != ELFCLASS64) {
 		dev_err(dev, "Unsupported class: %d\n", class);
 		return -EINVAL;
 	}
 
+	if (class == ELFCLASS64 && fw->size < sizeof(struct elf64_hdr)) {
+		dev_err(dev, "elf64 header is too small\n");
+		return -EINVAL;
+	}
+
 	/* We assume the firmware has the same endianness as the host */
 # ifdef __LITTLE_ENDIAN
 	if (ehdr->e_ident[EI_DATA] != ELFDATA2LSB) {
@@ -67,31 +85,55 @@ int rproc_elf_sanity_check(struct rproc *rproc, const struct firmware *fw)
 		return -EINVAL;
 	}
 
-	if (fw->size < ehdr->e_shoff + sizeof(struct elf32_shdr)) {
+	phoff = elf_hdr_get_e_phoff(class, fw->data);
+	shoff = elf_hdr_get_e_shoff(class, fw->data);
+	phnum =  elf_hdr_get_e_phnum(class, fw->data);
+	elf_shdr_get_size = elf_size_of_shdr(class);
+
+	if (fw->size < shoff + elf_shdr_get_size) {
 		dev_err(dev, "Image is too small\n");
 		return -EINVAL;
 	}
 
-	if (memcmp(ehdr->e_ident, ELFMAG, SELFMAG)) {
-		dev_err(dev, "Image is corrupted (bad magic)\n");
-		return -EINVAL;
-	}
-
-	if (ehdr->e_phnum == 0) {
+	if (phnum == 0) {
 		dev_err(dev, "No loadable segments\n");
 		return -EINVAL;
 	}
 
-	if (ehdr->e_phoff > fw->size) {
+	if (phoff > fw->size) {
 		dev_err(dev, "Firmware size is too small\n");
 		return -EINVAL;
 	}
 
+	dev_dbg(dev, "Firmware is an elf%d file\n",
+		class == ELFCLASS32 ? 32 : 64);
+
 	return 0;
 }
 EXPORT_SYMBOL(rproc_elf_sanity_check);
 
 /**
+ * rproc_elf_sanity_check() - Sanity Check ELF32 firmware image
+ * @rproc: the remote processor handle
+ * @fw: the ELF32 firmware image
+ *
+ * Make sure this fw image is sane.
+ */
+int rproc_elf32_sanity_check(struct rproc *rproc, const struct firmware *fw)
+{
+	int ret = rproc_elf_sanity_check(rproc, fw);
+
+	if (ret)
+		return ret;
+
+	if (fw_elf_get_class(fw) == ELFCLASS32)
+		return 0;
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL(rproc_elf32_sanity_check);
+
+/**
  * rproc_elf_get_boot_addr() - Get rproc's boot address.
  * @rproc: the remote processor handle
  * @fw: the ELF firmware image
@@ -102,11 +144,9 @@ EXPORT_SYMBOL(rproc_elf_sanity_check);
  * Note that the boot address is not a configurable property of all remote
  * processors. Some will always boot at a specific hard-coded address.
  */
-u32 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw)
+u64 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw)
 {
-	struct elf32_hdr *ehdr  = (struct elf32_hdr *)fw->data;
-
-	return ehdr->e_entry;
+	return elf_hdr_get_e_entry(fw_elf_get_class(fw), fw->data);
 }
 EXPORT_SYMBOL(rproc_elf_get_boot_addr);
 
@@ -137,53 +177,65 @@ EXPORT_SYMBOL(rproc_elf_get_boot_addr);
 int rproc_elf_load_segments(struct rproc *rproc, const struct firmware *fw)
 {
 	struct device *dev = &rproc->dev;
-	struct elf32_hdr *ehdr;
-	struct elf32_phdr *phdr;
+	const void *ehdr, *phdr;
 	int i, ret = 0;
+	u16 phnum;
 	const u8 *elf_data = fw->data;
+	u8 class = fw_elf_get_class(fw);
+	u32 elf_phdr_get_size = elf_size_of_phdr(class);
 
-	ehdr = (struct elf32_hdr *)elf_data;
-	phdr = (struct elf32_phdr *)(elf_data + ehdr->e_phoff);
+	ehdr = elf_data;
+	phnum = elf_hdr_get_e_phnum(class, ehdr);
+	phdr = elf_data + elf_hdr_get_e_phoff(class, ehdr);
 
 	/* go through the available ELF segments */
-	for (i = 0; i < ehdr->e_phnum; i++, phdr++) {
-		u32 da = phdr->p_paddr;
-		u32 memsz = phdr->p_memsz;
-		u32 filesz = phdr->p_filesz;
-		u32 offset = phdr->p_offset;
+	for (i = 0; i < phnum; i++, phdr += elf_phdr_get_size) {
+		u64 da = elf_phdr_get_p_paddr(class, phdr);
+		u64 memsz = elf_phdr_get_p_memsz(class, phdr);
+		u64 filesz = elf_phdr_get_p_filesz(class, phdr);
+		u64 offset = elf_phdr_get_p_offset(class, phdr);
+		u32 type = elf_phdr_get_p_type(class, phdr);
 		void *ptr;
 
-		if (phdr->p_type != PT_LOAD)
+		if (type != PT_LOAD)
 			continue;
 
-		dev_dbg(dev, "phdr: type %d da 0x%x memsz 0x%x filesz 0x%x\n",
-			phdr->p_type, da, memsz, filesz);
+		dev_dbg(dev, "phdr: type %d da 0x%llx memsz 0x%llx filesz 0x%llx\n",
+			type, da, memsz, filesz);
 
 		if (filesz > memsz) {
-			dev_err(dev, "bad phdr filesz 0x%x memsz 0x%x\n",
+			dev_err(dev, "bad phdr filesz 0x%llx memsz 0x%llx\n",
 				filesz, memsz);
 			ret = -EINVAL;
 			break;
 		}
 
 		if (offset + filesz > fw->size) {
-			dev_err(dev, "truncated fw: need 0x%x avail 0x%zx\n",
+			dev_err(dev, "truncated fw: need 0x%llx avail 0x%zx\n",
 				offset + filesz, fw->size);
 			ret = -EINVAL;
 			break;
 		}
 
+		if (!rproc_u64_fit_in_size_t(memsz)) {
+			dev_err(dev, "size (%llx) does not fit in size_t type\n",
+				memsz);
+			ret = -EOVERFLOW;
+			break;
+		}
+
 		/* grab the kernel address for this device address */
 		ptr = rproc_da_to_va(rproc, da, memsz);
 		if (!ptr) {
-			dev_err(dev, "bad phdr da 0x%x mem 0x%x\n", da, memsz);
+			dev_err(dev, "bad phdr da 0x%llx mem 0x%llx\n", da,
+				memsz);
 			ret = -EINVAL;
 			break;
 		}
 
 		/* put the segment where the remote processor expects it */
-		if (phdr->p_filesz)
-			memcpy(ptr, elf_data + phdr->p_offset, filesz);
+		if (filesz)
+			memcpy(ptr, elf_data + offset, filesz);
 
 		/*
 		 * Zero out remaining memory for this segment.
@@ -196,28 +248,42 @@ int rproc_elf_load_segments(struct rproc *rproc, const struct firmware *fw)
 			memset(ptr + filesz, 0, memsz - filesz);
 	}
 
+	if (ret == 0)
+		rproc->elf_class = class;
+
 	return ret;
 }
 EXPORT_SYMBOL(rproc_elf_load_segments);
 
-static struct elf32_shdr *
-find_table(struct device *dev, struct elf32_hdr *ehdr, size_t fw_size)
+static const void *
+find_table(struct device *dev, const struct firmware *fw)
 {
-	struct elf32_shdr *shdr;
+	const void *shdr, *name_table_shdr;
 	int i;
 	const char *name_table;
 	struct resource_table *table = NULL;
-	const u8 *elf_data = (void *)ehdr;
+	const u8 *elf_data = (void *)fw->data;
+	u8 class = fw_elf_get_class(fw);
+	size_t fw_size = fw->size;
+	const void *ehdr = elf_data;
+	u16 shnum = elf_hdr_get_e_shnum(class, ehdr);
+	u32 elf_shdr_get_size = elf_size_of_shdr(class);
+	u16 shstrndx = elf_hdr_get_e_shstrndx(class, ehdr);
 
 	/* look for the resource table and handle it */
-	shdr = (struct elf32_shdr *)(elf_data + ehdr->e_shoff);
-	name_table = elf_data + shdr[ehdr->e_shstrndx].sh_offset;
+	/* First, get the section header according to the elf class */
+	shdr = elf_data + elf_hdr_get_e_shoff(class, ehdr);
+	/* Compute name table section header entry in shdr array */
+	name_table_shdr = shdr + (shstrndx * elf_shdr_get_size);
+	/* Finally, compute the name table section address in elf */
+	name_table = elf_data + elf_shdr_get_sh_offset(class, name_table_shdr);
 
-	for (i = 0; i < ehdr->e_shnum; i++, shdr++) {
-		u32 size = shdr->sh_size;
-		u32 offset = shdr->sh_offset;
+	for (i = 0; i < shnum; i++, shdr += elf_shdr_get_size) {
+		u64 size = elf_shdr_get_sh_size(class, shdr);
+		u64 offset = elf_shdr_get_sh_offset(class, shdr);
+		u32 name = elf_shdr_get_sh_name(class, shdr);
 
-		if (strcmp(name_table + shdr->sh_name, ".resource_table"))
+		if (strcmp(name_table + name, ".resource_table"))
 			continue;
 
 		table = (struct resource_table *)(elf_data + offset);
@@ -270,21 +336,21 @@ find_table(struct device *dev, struct elf32_hdr *ehdr, size_t fw_size)
  */
 int rproc_elf_load_rsc_table(struct rproc *rproc, const struct firmware *fw)
 {
-	struct elf32_hdr *ehdr;
-	struct elf32_shdr *shdr;
+	const void *shdr;
 	struct device *dev = &rproc->dev;
 	struct resource_table *table = NULL;
 	const u8 *elf_data = fw->data;
 	size_t tablesz;
+	u8 class = fw_elf_get_class(fw);
+	u64 sh_offset;
 
-	ehdr = (struct elf32_hdr *)elf_data;
-
-	shdr = find_table(dev, ehdr, fw->size);
+	shdr = find_table(dev, fw);
 	if (!shdr)
 		return -EINVAL;
 
-	table = (struct resource_table *)(elf_data + shdr->sh_offset);
-	tablesz = shdr->sh_size;
+	sh_offset = elf_shdr_get_sh_offset(class, shdr);
+	table = (struct resource_table *)(elf_data + sh_offset);
+	tablesz = elf_shdr_get_sh_size(class, shdr);
 
 	/*
 	 * Create a copy of the resource table. When a virtio device starts
@@ -317,13 +383,24 @@ EXPORT_SYMBOL(rproc_elf_load_rsc_table);
 struct resource_table *rproc_elf_find_loaded_rsc_table(struct rproc *rproc,
 						       const struct firmware *fw)
 {
-	struct elf32_hdr *ehdr = (struct elf32_hdr *)fw->data;
-	struct elf32_shdr *shdr;
+	const void *shdr;
+	u64 sh_addr, sh_size;
+	u8 class = fw_elf_get_class(fw);
+	struct device *dev = &rproc->dev;
 
-	shdr = find_table(&rproc->dev, ehdr, fw->size);
+	shdr = find_table(&rproc->dev, fw);
 	if (!shdr)
 		return NULL;
 
-	return rproc_da_to_va(rproc, shdr->sh_addr, shdr->sh_size);
+	sh_addr = elf_shdr_get_sh_addr(class, shdr);
+	sh_size = elf_shdr_get_sh_size(class, shdr);
+
+	if (!rproc_u64_fit_in_size_t(sh_size)) {
+		dev_err(dev, "size (%llx) does not fit in size_t type\n",
+			sh_size);
+		return NULL;
+	}
+
+	return rproc_da_to_va(rproc, sh_addr, sh_size);
 }
 EXPORT_SYMBOL(rproc_elf_find_loaded_rsc_table);
diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h
index 493ef92..b389dc7 100644
--- a/drivers/remoteproc/remoteproc_internal.h
+++ b/drivers/remoteproc/remoteproc_internal.h
@@ -50,12 +50,13 @@ void rproc_exit_sysfs(void);
 void rproc_free_vring(struct rproc_vring *rvring);
 int rproc_alloc_vring(struct rproc_vdev *rvdev, int i);
 
-void *rproc_da_to_va(struct rproc *rproc, u64 da, int len);
+void *rproc_da_to_va(struct rproc *rproc, u64 da, size_t len);
 phys_addr_t rproc_va_to_pa(void *cpu_addr);
 int rproc_trigger_recovery(struct rproc *rproc);
 
+int rproc_elf32_sanity_check(struct rproc *rproc, const struct firmware *fw);
 int rproc_elf_sanity_check(struct rproc *rproc, const struct firmware *fw);
-u32 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw);
+u64 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw);
 int rproc_elf_load_segments(struct rproc *rproc, const struct firmware *fw);
 int rproc_elf_load_rsc_table(struct rproc *rproc, const struct firmware *fw);
 struct resource_table *rproc_elf_find_loaded_rsc_table(struct rproc *rproc,
@@ -73,7 +74,7 @@ int rproc_fw_sanity_check(struct rproc *rproc, const struct firmware *fw)
 }
 
 static inline
-u32 rproc_get_boot_addr(struct rproc *rproc, const struct firmware *fw)
+u64 rproc_get_boot_addr(struct rproc *rproc, const struct firmware *fw)
 {
 	if (rproc->ops->get_boot_addr)
 		return rproc->ops->get_boot_addr(rproc, fw);
@@ -119,4 +120,13 @@ struct resource_table *rproc_find_loaded_rsc_table(struct rproc *rproc,
 	return NULL;
 }
 
+static inline
+bool rproc_u64_fit_in_size_t(u64 val)
+{
+	if (sizeof(size_t) == sizeof(u64))
+		return true;
+
+	return (val <= (size_t) -1);
+}
+
 #endif /* REMOTEPROC_INTERNAL_H */
diff --git a/drivers/remoteproc/remoteproc_virtio.c b/drivers/remoteproc/remoteproc_virtio.c
index 8c07cb2..e61d738 100644
--- a/drivers/remoteproc/remoteproc_virtio.c
+++ b/drivers/remoteproc/remoteproc_virtio.c
@@ -320,6 +320,7 @@ static void rproc_virtio_dev_release(struct device *dev)
 /**
  * rproc_add_virtio_dev() - register an rproc-induced virtio device
  * @rvdev: the remote vdev
+ * @id: the device type identification (used to match it with a driver).
  *
  * This function registers a virtio device. This vdev's partent is
  * the rproc device.
@@ -334,6 +335,13 @@ int rproc_add_virtio_dev(struct rproc_vdev *rvdev, int id)
 	struct rproc_mem_entry *mem;
 	int ret;
 
+	if (rproc->ops->kick == NULL) {
+		ret = -EINVAL;
+		dev_err(dev, ".kick method not defined for %s",
+				rproc->name);
+		goto out;
+	}
+
 	/* Try to find dedicated vdev buffer carveout */
 	mem = rproc_find_carveout_by_name(rproc, "vdev%dbuffer", rvdev->index);
 	if (mem) {
diff --git a/drivers/remoteproc/st_remoteproc.c b/drivers/remoteproc/st_remoteproc.c
index ee13d23..a6cbfa4 100644
--- a/drivers/remoteproc/st_remoteproc.c
+++ b/drivers/remoteproc/st_remoteproc.c
@@ -190,7 +190,7 @@ static int st_rproc_start(struct rproc *rproc)
 		}
 	}
 
-	dev_info(&rproc->dev, "Started from 0x%x\n", rproc->bootaddr);
+	dev_info(&rproc->dev, "Started from 0x%llx\n", rproc->bootaddr);
 
 	return 0;
 
@@ -233,7 +233,7 @@ static const struct rproc_ops st_rproc_ops = {
 	.parse_fw		= st_rproc_parse_fw,
 	.load			= rproc_elf_load_segments,
 	.find_loaded_rsc_table	= rproc_elf_find_loaded_rsc_table,
-	.sanity_check		= rproc_elf_sanity_check,
+	.sanity_check		= rproc_elf32_sanity_check,
 	.get_boot_addr		= rproc_elf_get_boot_addr,
 };
 
diff --git a/drivers/remoteproc/st_slim_rproc.c b/drivers/remoteproc/st_slim_rproc.c
index 04492fe..3cca8b6 100644
--- a/drivers/remoteproc/st_slim_rproc.c
+++ b/drivers/remoteproc/st_slim_rproc.c
@@ -174,7 +174,7 @@ static int slim_rproc_stop(struct rproc *rproc)
 	return 0;
 }
 
-static void *slim_rproc_da_to_va(struct rproc *rproc, u64 da, int len)
+static void *slim_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len)
 {
 	struct st_slim_rproc *slim_rproc = rproc->priv;
 	void *va = NULL;
@@ -191,7 +191,7 @@ static void *slim_rproc_da_to_va(struct rproc *rproc, u64 da, int len)
 		}
 	}
 
-	dev_dbg(&rproc->dev, "da = 0x%llx len = 0x%x va = 0x%pK\n",
+	dev_dbg(&rproc->dev, "da = 0x%llx len = 0x%zx va = 0x%pK\n",
 		da, len, va);
 
 	return va;
@@ -203,7 +203,7 @@ static const struct rproc_ops slim_rproc_ops = {
 	.da_to_va       = slim_rproc_da_to_va,
 	.get_boot_addr	= rproc_elf_get_boot_addr,
 	.load		= rproc_elf_load_segments,
-	.sanity_check	= rproc_elf_sanity_check,
+	.sanity_check	= rproc_elf32_sanity_check,
 };
 
 /**
diff --git a/drivers/remoteproc/stm32_rproc.c b/drivers/remoteproc/stm32_rproc.c
index a18f880..6a66dbf 100644
--- a/drivers/remoteproc/stm32_rproc.c
+++ b/drivers/remoteproc/stm32_rproc.c
@@ -505,7 +505,7 @@ static struct rproc_ops st_rproc_ops = {
 	.load		= rproc_elf_load_segments,
 	.parse_fw	= stm32_rproc_parse_fw,
 	.find_loaded_rsc_table = rproc_elf_find_loaded_rsc_table,
-	.sanity_check	= rproc_elf_sanity_check,
+	.sanity_check	= rproc_elf32_sanity_check,
 	.get_boot_addr	= rproc_elf_get_boot_addr,
 };
 
@@ -602,7 +602,7 @@ static int stm32_rproc_parse_dt(struct platform_device *pdev)
 
 	err = stm32_rproc_get_syscon(np, "st,syscfg-pdds", &ddata->pdds);
 	if (err)
-		dev_warn(dev, "failed to get pdds\n");
+		dev_info(dev, "failed to get pdds\n");
 
 	rproc->auto_boot = of_property_read_bool(np, "st,auto-boot");
 
diff --git a/drivers/remoteproc/wkup_m3_rproc.c b/drivers/remoteproc/wkup_m3_rproc.c
index 3984e58..b9349d6 100644
--- a/drivers/remoteproc/wkup_m3_rproc.c
+++ b/drivers/remoteproc/wkup_m3_rproc.c
@@ -80,14 +80,14 @@ static int wkup_m3_rproc_stop(struct rproc *rproc)
 	return 0;
 }
 
-static void *wkup_m3_rproc_da_to_va(struct rproc *rproc, u64 da, int len)
+static void *wkup_m3_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len)
 {
 	struct wkup_m3_rproc *wkupm3 = rproc->priv;
 	void *va = NULL;
 	int i;
 	u32 offset;
 
-	if (len <= 0)
+	if (len == 0)
 		return NULL;
 
 	for (i = 0; i < WKUPM3_MEM_MAX; i++) {
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 8e50388..ec873f0 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -41,9 +41,6 @@
 	  device should record time in UTC, since the kernel won't do
 	  timezone correction.
 
-	  The driver for this RTC device must be loaded before late_initcall
-	  functions run, so it must usually be statically linked.
-
 	  This clock should be battery-backed, so that it reads the correct
 	  time when the system boots from a power-off state. Otherwise, your
 	  system will need an external clock source (like an NTP server).
@@ -241,6 +238,7 @@
 config RTC_DRV_DS1307
 	tristate "Dallas/Maxim DS1307/37/38/39/40/41, ST M41T00, EPSON RX-8025, ISL12057"
 	select REGMAP_I2C
+	select WATCHDOG_CORE if WATCHDOG
 	help
 	  If you say yes here you get support for various compatible RTC
 	  chips (often with battery backup) connected with I2C. This driver
@@ -592,6 +590,16 @@
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-rc5t583.
 
+config RTC_DRV_RC5T619
+	tristate "RICOH RC5T619 RTC driver"
+	depends on MFD_RN5T618
+	help
+	  If you say yes here you get support for the RTC on the
+	  RICOH RC5T619 chips.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-rc5t619.
+
 config RTC_DRV_S35390A
 	tristate "Seiko Instruments S-35390A"
 	select BITREVERSE
@@ -1335,7 +1343,7 @@
 
 config RTC_DRV_FSL_FTM_ALARM
 	tristate "Freescale FlexTimer alarm timer"
-	depends on ARCH_LAYERSCAPE || SOC_LS1021A
+	depends on ARCH_LAYERSCAPE || SOC_LS1021A || COMPILE_TEST
 	help
 	   For the FlexTimer in LS1012A, LS1021A, LS1028A, LS1043A, LS1046A,
 	   LS1088A, LS208xA, we can use FTM as the wakeup source.
@@ -1762,6 +1770,7 @@
 config RTC_DRV_SNVS
 	tristate "Freescale SNVS RTC support"
 	select REGMAP_MMIO
+	depends on ARCH_MXC || COMPILE_TEST
 	depends on HAS_IOMEM
 	depends on OF
 	help
@@ -1807,6 +1816,16 @@
 	   This driver can also be built as a module. If so, the module
 	   will be called rtc-moxart
 
+config RTC_DRV_MT2712
+	tristate "MediaTek MT2712 SoC based RTC"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	help
+	  This enables support for the real time clock built in the MediaTek
+	  SoCs for MT2712.
+
+	  This drive can also be built as a module. If so, the module
+	  will be called rtc-mt2712.
+
 config RTC_DRV_MT6397
 	tristate "MediaTek PMIC based RTC"
 	depends on MFD_MT6397 || (COMPILE_TEST && IRQ_DOMAIN)
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 24c7dfa..0721752 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -6,7 +6,6 @@
 ccflags-$(CONFIG_RTC_DEBUG)	:= -DDEBUG
 
 obj-$(CONFIG_RTC_LIB)		+= lib.o
-obj-$(CONFIG_RTC_HCTOSYS)	+= hctosys.o
 obj-$(CONFIG_RTC_SYSTOHC)	+= systohc.o
 obj-$(CONFIG_RTC_CLASS)		+= rtc-core.o
 obj-$(CONFIG_RTC_MC146818_LIB)	+= rtc-mc146818-lib.o
@@ -106,6 +105,7 @@
 obj-$(CONFIG_RTC_DRV_MOXART)	+= rtc-moxart.o
 obj-$(CONFIG_RTC_DRV_MPC5121)	+= rtc-mpc5121.o
 obj-$(CONFIG_RTC_DRV_MSM6242)	+= rtc-msm6242.o
+obj-$(CONFIG_RTC_DRV_MT2712)	+= rtc-mt2712.o
 obj-$(CONFIG_RTC_DRV_MT6397)	+= rtc-mt6397.o
 obj-$(CONFIG_RTC_DRV_MT7622)	+= rtc-mt7622.o
 obj-$(CONFIG_RTC_DRV_MV)	+= rtc-mv.o
@@ -133,6 +133,7 @@
 obj-$(CONFIG_RTC_DRV_R7301)	+= rtc-r7301.o
 obj-$(CONFIG_RTC_DRV_R9701)	+= rtc-r9701.o
 obj-$(CONFIG_RTC_DRV_RC5T583)	+= rtc-rc5t583.o
+obj-$(CONFIG_RTC_DRV_RC5T619)	+= rtc-rc5t619.o
 obj-$(CONFIG_RTC_DRV_RK808)	+= rtc-rk808.o
 obj-$(CONFIG_RTC_DRV_RP5C01)	+= rtc-rp5c01.o
 obj-$(CONFIG_RTC_DRV_RS5C313)	+= rtc-rs5c313.o
diff --git a/drivers/rtc/class.c b/drivers/rtc/class.c
index 9458e6d..7c88d19 100644
--- a/drivers/rtc/class.c
+++ b/drivers/rtc/class.c
@@ -34,6 +34,50 @@ static void rtc_device_release(struct device *dev)
 #ifdef CONFIG_RTC_HCTOSYS_DEVICE
 /* Result of the last RTC to system clock attempt. */
 int rtc_hctosys_ret = -ENODEV;
+
+/* IMPORTANT: the RTC only stores whole seconds. It is arbitrary
+ * whether it stores the most close value or the value with partial
+ * seconds truncated. However, it is important that we use it to store
+ * the truncated value. This is because otherwise it is necessary,
+ * in an rtc sync function, to read both xtime.tv_sec and
+ * xtime.tv_nsec. On some processors (i.e. ARM), an atomic read
+ * of >32bits is not possible. So storing the most close value would
+ * slow down the sync API. So here we have the truncated value and
+ * the best guess is to add 0.5s.
+ */
+
+static void rtc_hctosys(struct rtc_device *rtc)
+{
+	int err;
+	struct rtc_time tm;
+	struct timespec64 tv64 = {
+		.tv_nsec = NSEC_PER_SEC >> 1,
+	};
+
+	err = rtc_read_time(rtc, &tm);
+	if (err) {
+		dev_err(rtc->dev.parent,
+			"hctosys: unable to read the hardware clock\n");
+		goto err_read;
+	}
+
+	tv64.tv_sec = rtc_tm_to_time64(&tm);
+
+#if BITS_PER_LONG == 32
+	if (tv64.tv_sec > INT_MAX) {
+		err = -ERANGE;
+		goto err_read;
+	}
+#endif
+
+	err = do_settimeofday64(&tv64);
+
+	dev_info(rtc->dev.parent, "setting system clock to %ptR UTC (%lld)\n",
+		 &tm, (long long)tv64.tv_sec);
+
+err_read:
+	rtc_hctosys_ret = err;
+}
 #endif
 
 #if defined(CONFIG_PM_SLEEP) && defined(CONFIG_RTC_HCTOSYS_DEVICE)
@@ -375,6 +419,11 @@ int __rtc_register_device(struct module *owner, struct rtc_device *rtc)
 	dev_info(rtc->dev.parent, "registered as %s\n",
 		 dev_name(&rtc->dev));
 
+#ifdef CONFIG_RTC_HCTOSYS_DEVICE
+	if (!strcmp(dev_name(&rtc->dev), CONFIG_RTC_HCTOSYS_DEVICE))
+		rtc_hctosys(rtc);
+#endif
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(__rtc_register_device);
diff --git a/drivers/rtc/hctosys.c b/drivers/rtc/hctosys.c
deleted file mode 100644
index a74d0d8..0000000
--- a/drivers/rtc/hctosys.c
+++ /dev/null
@@ -1,69 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * RTC subsystem, initialize system time on startup
- *
- * Copyright (C) 2005 Tower Technologies
- * Author: Alessandro Zummo <a.zummo@towertech.it>
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/rtc.h>
-
-/* IMPORTANT: the RTC only stores whole seconds. It is arbitrary
- * whether it stores the most close value or the value with partial
- * seconds truncated. However, it is important that we use it to store
- * the truncated value. This is because otherwise it is necessary,
- * in an rtc sync function, to read both xtime.tv_sec and
- * xtime.tv_nsec. On some processors (i.e. ARM), an atomic read
- * of >32bits is not possible. So storing the most close value would
- * slow down the sync API. So here we have the truncated value and
- * the best guess is to add 0.5s.
- */
-
-static int __init rtc_hctosys(void)
-{
-	int err = -ENODEV;
-	struct rtc_time tm;
-	struct timespec64 tv64 = {
-		.tv_nsec = NSEC_PER_SEC >> 1,
-	};
-	struct rtc_device *rtc = rtc_class_open(CONFIG_RTC_HCTOSYS_DEVICE);
-
-	if (!rtc) {
-		pr_info("unable to open rtc device (%s)\n",
-			CONFIG_RTC_HCTOSYS_DEVICE);
-		goto err_open;
-	}
-
-	err = rtc_read_time(rtc, &tm);
-	if (err) {
-		dev_err(rtc->dev.parent,
-			"hctosys: unable to read the hardware clock\n");
-		goto err_read;
-	}
-
-	tv64.tv_sec = rtc_tm_to_time64(&tm);
-
-#if BITS_PER_LONG == 32
-	if (tv64.tv_sec > INT_MAX) {
-		err = -ERANGE;
-		goto err_read;
-	}
-#endif
-
-	err = do_settimeofday64(&tv64);
-
-	dev_info(rtc->dev.parent, "setting system clock to %ptR UTC (%lld)\n",
-		 &tm, (long long)tv64.tv_sec);
-
-err_read:
-	rtc_class_close(rtc);
-
-err_open:
-	rtc_hctosys_ret = err;
-
-	return err;
-}
-
-late_initcall(rtc_hctosys);
diff --git a/drivers/rtc/rtc-88pm860x.c b/drivers/rtc/rtc-88pm860x.c
index 4743b16..cc9b14e 100644
--- a/drivers/rtc/rtc-88pm860x.c
+++ b/drivers/rtc/rtc-88pm860x.c
@@ -28,7 +28,6 @@ struct pm860x_rtc_info {
 
 	int			irq;
 	int			vrtc;
-	int			(*sync)(unsigned int ticks);
 };
 
 #define REG_VRTC_MEAS1		0x7D
@@ -76,33 +75,6 @@ static int pm860x_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
 	return 0;
 }
 
-/*
- * Calculate the next alarm time given the requested alarm time mask
- * and the current time.
- */
-static void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now,
-				struct rtc_time *alrm)
-{
-	unsigned long next_time;
-	unsigned long now_time;
-
-	next->tm_year = now->tm_year;
-	next->tm_mon = now->tm_mon;
-	next->tm_mday = now->tm_mday;
-	next->tm_hour = alrm->tm_hour;
-	next->tm_min = alrm->tm_min;
-	next->tm_sec = alrm->tm_sec;
-
-	rtc_tm_to_time(now, &now_time);
-	rtc_tm_to_time(next, &next_time);
-
-	if (next_time < now_time) {
-		/* Advance one day */
-		next_time += 60 * 60 * 24;
-		rtc_time_to_tm(next_time, next);
-	}
-}
-
 static int pm860x_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
 	struct pm860x_rtc_info *info = dev_get_drvdata(dev);
@@ -123,7 +95,7 @@ static int pm860x_rtc_read_time(struct device *dev, struct rtc_time *tm)
 	dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
 		base, data, ticks);
 
-	rtc_time_to_tm(ticks, tm);
+	rtc_time64_to_tm(ticks, tm);
 
 	return 0;
 }
@@ -140,7 +112,7 @@ static int pm860x_rtc_set_time(struct device *dev, struct rtc_time *tm)
 			1900 + tm->tm_year);
 		return -EINVAL;
 	}
-	rtc_tm_to_time(tm, &ticks);
+	ticks = rtc_tm_to_time64(tm);
 
 	/* load 32-bit read-only counter */
 	pm860x_bulk_read(info->i2c, PM8607_RTC_COUNTER1, 4, buf);
@@ -155,8 +127,6 @@ static int pm860x_rtc_set_time(struct device *dev, struct rtc_time *tm)
 	pm860x_page_reg_write(info->i2c, REG2_DATA, (base >> 8) & 0xFF);
 	pm860x_page_reg_write(info->i2c, REG3_DATA, base & 0xFF);
 
-	if (info->sync)
-		info->sync(ticks);
 	return 0;
 }
 
@@ -180,7 +150,7 @@ static int pm860x_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 	dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
 		base, data, ticks);
 
-	rtc_time_to_tm(ticks, &alrm->time);
+	rtc_time64_to_tm(ticks, &alrm->time);
 	ret = pm860x_reg_read(info->i2c, PM8607_RTC1);
 	alrm->enabled = (ret & ALARM_EN) ? 1 : 0;
 	alrm->pending = (ret & (ALARM | ALARM_WAKEUP)) ? 1 : 0;
@@ -190,7 +160,6 @@ static int pm860x_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 static int pm860x_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 {
 	struct pm860x_rtc_info *info = dev_get_drvdata(dev);
-	struct rtc_time now_tm, alarm_tm;
 	unsigned long ticks, base, data;
 	unsigned char buf[8];
 	int mask;
@@ -203,18 +172,7 @@ static int pm860x_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 	base = ((unsigned long)buf[1] << 24) | (buf[3] << 16) |
 		(buf[5] << 8) | buf[7];
 
-	/* load 32-bit read-only counter */
-	pm860x_bulk_read(info->i2c, PM8607_RTC_COUNTER1, 4, buf);
-	data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
-		(buf[1] << 8) | buf[0];
-	ticks = base + data;
-	dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
-		base, data, ticks);
-
-	rtc_time_to_tm(ticks, &now_tm);
-	rtc_next_alarm_time(&alarm_tm, &now_tm, &alrm->time);
-	/* get new ticks for alarm in 24 hours */
-	rtc_tm_to_time(&alarm_tm, &ticks);
+	ticks = rtc_tm_to_time64(&alrm->time);
 	data = ticks - base;
 
 	buf[0] = data & 0xff;
@@ -309,20 +267,15 @@ static int pm860x_rtc_dt_init(struct platform_device *pdev,
 	return 0;
 }
 #else
-#define pm860x_rtc_dt_init(x, y)	(-1)
+#define pm860x_rtc_dt_init(x, y)	do { } while (0)
 #endif
 
 static int pm860x_rtc_probe(struct platform_device *pdev)
 {
 	struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
-	struct pm860x_rtc_pdata *pdata = NULL;
 	struct pm860x_rtc_info *info;
-	struct rtc_time tm;
-	unsigned long ticks = 0;
 	int ret;
 
-	pdata = dev_get_platdata(&pdev->dev);
-
 	info = devm_kzalloc(&pdev->dev, sizeof(struct pm860x_rtc_info),
 			    GFP_KERNEL);
 	if (!info)
@@ -336,6 +289,10 @@ static int pm860x_rtc_probe(struct platform_device *pdev)
 	info->dev = &pdev->dev;
 	dev_set_drvdata(&pdev->dev, info);
 
+	info->rtc_dev = devm_rtc_allocate_device(&pdev->dev);
+	if (IS_ERR(info->rtc_dev))
+		return PTR_ERR(info->rtc_dev);
+
 	ret = devm_request_threaded_irq(&pdev->dev, info->irq, NULL,
 					rtc_update_handler, IRQF_ONESHOT, "rtc",
 					info);
@@ -351,39 +308,14 @@ static int pm860x_rtc_probe(struct platform_device *pdev)
 	pm860x_page_reg_write(info->i2c, REG2_ADDR, REG2_DATA);
 	pm860x_page_reg_write(info->i2c, REG3_ADDR, REG3_DATA);
 
-	ret = pm860x_rtc_read_time(&pdev->dev, &tm);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Failed to read initial time.\n");
-		return ret;
-	}
-	if ((tm.tm_year < 70) || (tm.tm_year > 138)) {
-		tm.tm_year = 70;
-		tm.tm_mon = 0;
-		tm.tm_mday = 1;
-		tm.tm_hour = 0;
-		tm.tm_min = 0;
-		tm.tm_sec = 0;
-		ret = pm860x_rtc_set_time(&pdev->dev, &tm);
-		if (ret < 0) {
-			dev_err(&pdev->dev, "Failed to set initial time.\n");
-			return ret;
-		}
-	}
-	rtc_tm_to_time(&tm, &ticks);
-	if (pm860x_rtc_dt_init(pdev, info)) {
-		if (pdata && pdata->sync) {
-			pdata->sync(ticks);
-			info->sync = pdata->sync;
-		}
-	}
+	pm860x_rtc_dt_init(pdev, info);
 
-	info->rtc_dev = devm_rtc_device_register(&pdev->dev, "88pm860x-rtc",
-					    &pm860x_rtc_ops, THIS_MODULE);
-	ret = PTR_ERR(info->rtc_dev);
-	if (IS_ERR(info->rtc_dev)) {
-		dev_err(&pdev->dev, "Failed to register RTC device: %d\n", ret);
+	info->rtc_dev->ops = &pm860x_rtc_ops;
+	info->rtc_dev->range_max = U32_MAX;
+
+	ret = rtc_register_device(info->rtc_dev);
+	if (ret)
 		return ret;
-	}
 
 	/*
 	 * enable internal XO instead of internal 3.25MHz clock since it can
@@ -393,12 +325,6 @@ static int pm860x_rtc_probe(struct platform_device *pdev)
 
 #ifdef VRTC_CALIBRATION
 	/* <00> -- 2.7V, <01> -- 2.9V, <10> -- 3.1V, <11> -- 3.3V */
-	if (pm860x_rtc_dt_init(pdev, info)) {
-		if (pdata && pdata->vrtc)
-			info->vrtc = pdata->vrtc & 0x3;
-		else
-			info->vrtc = 1;
-	}
 	pm860x_set_bits(info->i2c, PM8607_MEAS_EN2, MEAS2_VRTC, MEAS2_VRTC);
 
 	/* calibrate VRTC */
diff --git a/drivers/rtc/rtc-ab8500.c b/drivers/rtc/rtc-ab8500.c
index 8492ffe..3d60f32 100644
--- a/drivers/rtc/rtc-ab8500.c
+++ b/drivers/rtc/rtc-ab8500.c
@@ -100,7 +100,7 @@ static int ab8500_rtc_read_time(struct device *dev, struct rtc_time *tm)
 	secs =	secs / COUNTS_PER_SEC;
 	secs =	secs + (mins * 60);
 
-	rtc_time_to_tm(secs, tm);
+	rtc_time64_to_tm(secs, tm);
 	return 0;
 }
 
@@ -110,7 +110,7 @@ static int ab8500_rtc_set_time(struct device *dev, struct rtc_time *tm)
 	unsigned char buf[ARRAY_SIZE(ab8500_rtc_time_regs)];
 	unsigned long no_secs, no_mins, secs = 0;
 
-	rtc_tm_to_time(tm, &secs);
+	secs = rtc_tm_to_time64(tm);
 
 	no_mins = secs / 60;
 
@@ -168,7 +168,7 @@ static int ab8500_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 	mins = (buf[0] << 16) | (buf[1] << 8) | (buf[2]);
 	secs = mins * 60;
 
-	rtc_time_to_tm(secs, &alarm->time);
+	rtc_time64_to_tm(secs, &alarm->time);
 
 	return 0;
 }
@@ -188,7 +188,7 @@ static int ab8500_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 	struct rtc_time curtm;
 
 	/* Get the number of seconds since 1970 */
-	rtc_tm_to_time(&alarm->time, &secs);
+	secs = rtc_tm_to_time64(&alarm->time);
 
 	/*
 	 * Check whether alarm is set less than 1min.
@@ -196,7 +196,7 @@ static int ab8500_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 	 * return -EINVAL, so UIE EMUL can take it up, incase of UIE_ON
 	 */
 	ab8500_rtc_read_time(dev, &curtm); /* Read current time */
-	rtc_tm_to_time(&curtm, &cursec);
+	cursec = rtc_tm_to_time64(&curtm);
 	if ((secs - cursec) < 59) {
 		dev_dbg(dev, "Alarm less than 1 minute not supported\r\n");
 		return -EINVAL;
diff --git a/drivers/rtc/rtc-au1xxx.c b/drivers/rtc/rtc-au1xxx.c
index 7c5530c..791bebc 100644
--- a/drivers/rtc/rtc-au1xxx.c
+++ b/drivers/rtc/rtc-au1xxx.c
@@ -34,7 +34,7 @@ static int au1xtoy_rtc_read_time(struct device *dev, struct rtc_time *tm)
 
 	t = alchemy_rdsys(AU1000_SYS_TOYREAD);
 
-	rtc_time_to_tm(t, tm);
+	rtc_time64_to_tm(t, tm);
 
 	return 0;
 }
@@ -43,7 +43,7 @@ static int au1xtoy_rtc_set_time(struct device *dev, struct rtc_time *tm)
 {
 	unsigned long t;
 
-	rtc_tm_to_time(tm, &t);
+	t = rtc_tm_to_time64(tm);
 
 	alchemy_wrsys(t, AU1000_SYS_TOYWRITE);
 
@@ -65,17 +65,13 @@ static int au1xtoy_rtc_probe(struct platform_device *pdev)
 {
 	struct rtc_device *rtcdev;
 	unsigned long t;
-	int ret;
 
 	t = alchemy_rdsys(AU1000_SYS_CNTRCTRL);
 	if (!(t & CNTR_OK)) {
 		dev_err(&pdev->dev, "counters not working; aborting.\n");
-		ret = -ENODEV;
-		goto out_err;
+		return -ENODEV;
 	}
 
-	ret = -ETIMEDOUT;
-
 	/* set counter0 tickrate to 1Hz if necessary */
 	if (alchemy_rdsys(AU1000_SYS_TOYTRIM) != 32767) {
 		/* wait until hardware gives access to TRIM register */
@@ -88,7 +84,7 @@ static int au1xtoy_rtc_probe(struct platform_device *pdev)
 			 * counters are unusable.
 			 */
 			dev_err(&pdev->dev, "timeout waiting for access\n");
-			goto out_err;
+			return -ETIMEDOUT;
 		}
 
 		/* set 1Hz TOY tick rate */
@@ -99,19 +95,16 @@ static int au1xtoy_rtc_probe(struct platform_device *pdev)
 	while (alchemy_rdsys(AU1000_SYS_CNTRCTRL) & SYS_CNTRL_C0S)
 		msleep(1);
 
-	rtcdev = devm_rtc_device_register(&pdev->dev, "rtc-au1xxx",
-				     &au1xtoy_rtc_ops, THIS_MODULE);
-	if (IS_ERR(rtcdev)) {
-		ret = PTR_ERR(rtcdev);
-		goto out_err;
-	}
+	rtcdev = devm_rtc_allocate_device(&pdev->dev);
+	if (IS_ERR(rtcdev))
+		return PTR_ERR(rtcdev);
+
+	rtcdev->ops = &au1xtoy_rtc_ops;
+	rtcdev->range_max = U32_MAX;
 
 	platform_set_drvdata(pdev, rtcdev);
 
-	return 0;
-
-out_err:
-	return ret;
+	return rtc_register_device(rtcdev);
 }
 
 static struct platform_driver au1xrtc_driver = {
diff --git a/drivers/rtc/rtc-bd70528.c b/drivers/rtc/rtc-bd70528.c
index bbbb1f0..4492b77 100644
--- a/drivers/rtc/rtc-bd70528.c
+++ b/drivers/rtc/rtc-bd70528.c
@@ -542,10 +542,8 @@ static int bd70528_probe(struct platform_device *pdev)
 
 	irq = platform_get_irq_byname(pdev, irq_name);
 
-	if (irq < 0) {
-		dev_err(&pdev->dev, "Failed to get irq\n");
+	if (irq < 0)
 		return irq;
-	}
 
 	platform_set_drvdata(pdev, bd_rtc);
 
diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index 82bfe00..bcc96ab 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -649,10 +649,11 @@ static struct cmos_rtc	cmos_rtc;
 
 static irqreturn_t cmos_interrupt(int irq, void *p)
 {
+	unsigned long	flags;
 	u8		irqstat;
 	u8		rtc_control;
 
-	spin_lock(&rtc_lock);
+	spin_lock_irqsave(&rtc_lock, flags);
 
 	/* When the HPET interrupt handler calls us, the interrupt
 	 * status is passed as arg1 instead of the irq number.  But
@@ -686,7 +687,7 @@ static irqreturn_t cmos_interrupt(int irq, void *p)
 			hpet_mask_rtc_irq_bit(RTC_AIE);
 		CMOS_READ(RTC_INTR_FLAGS);
 	}
-	spin_unlock(&rtc_lock);
+	spin_unlock_irqrestore(&rtc_lock, flags);
 
 	if (is_intr(irqstat)) {
 		rtc_update_irq(p, 1, irqstat);
diff --git a/drivers/rtc/rtc-cpcap.c b/drivers/rtc/rtc-cpcap.c
index 6a3b70f..a603f1f 100644
--- a/drivers/rtc/rtc-cpcap.c
+++ b/drivers/rtc/rtc-cpcap.c
@@ -56,14 +56,14 @@ static void cpcap2rtc_time(struct rtc_time *rtc, struct cpcap_time *cpcap)
 	tod = (cpcap->tod1 & TOD1_MASK) | ((cpcap->tod2 & TOD2_MASK) << 8);
 	time = tod + ((cpcap->day & DAY_MASK) * SECS_PER_DAY);
 
-	rtc_time_to_tm(time, rtc);
+	rtc_time64_to_tm(time, rtc);
 }
 
 static void rtc2cpcap_time(struct cpcap_time *cpcap, struct rtc_time *rtc)
 {
 	unsigned long time;
 
-	rtc_tm_to_time(rtc, &time);
+	time = rtc_tm_to_time64(rtc);
 
 	cpcap->day = time / SECS_PER_DAY;
 	time %= SECS_PER_DAY;
@@ -256,12 +256,13 @@ static int cpcap_rtc_probe(struct platform_device *pdev)
 		return -ENODEV;
 
 	platform_set_drvdata(pdev, rtc);
-	rtc->rtc_dev = devm_rtc_device_register(dev, "cpcap_rtc",
-						&cpcap_rtc_ops, THIS_MODULE);
-
+	rtc->rtc_dev = devm_rtc_allocate_device(dev);
 	if (IS_ERR(rtc->rtc_dev))
 		return PTR_ERR(rtc->rtc_dev);
 
+	rtc->rtc_dev->ops = &cpcap_rtc_ops;
+	rtc->rtc_dev->range_max = (1 << 14) * SECS_PER_DAY - 1;
+
 	err = cpcap_get_vendor(dev, rtc->regmap, &rtc->vendor);
 	if (err)
 		return err;
@@ -298,7 +299,7 @@ static int cpcap_rtc_probe(struct platform_device *pdev)
 		/* ignore error and continue without wakeup support */
 	}
 
-	return 0;
+	return rtc_register_device(rtc->rtc_dev);
 }
 
 static const struct of_device_id cpcap_rtc_of_match[] = {
diff --git a/drivers/rtc/rtc-da9052.c b/drivers/rtc/rtc-da9052.c
index 204eb7c..58de10d 100644
--- a/drivers/rtc/rtc-da9052.c
+++ b/drivers/rtc/rtc-da9052.c
@@ -103,13 +103,11 @@ static int da9052_set_alarm(struct da9052_rtc *rtc, struct rtc_time *rtc_tm)
 	int ret;
 	uint8_t v[3];
 
-	ret = rtc_tm_to_time(rtc_tm, &alm_time);
-	if (ret != 0)
-		return ret;
+	alm_time = rtc_tm_to_time64(rtc_tm);
 
 	if (rtc_tm->tm_sec > 0) {
 		alm_time += 60 - rtc_tm->tm_sec;
-		rtc_time_to_tm(alm_time, rtc_tm);
+		rtc_time64_to_tm(alm_time, rtc_tm);
 	}
 	BUG_ON(rtc_tm->tm_sec); /* it will cause repeated irqs if not zero */
 
@@ -298,12 +296,18 @@ static int da9052_rtc_probe(struct platform_device *pdev)
 		rtc_err(rtc, "Failed to disable TICKS: %d\n", ret);
 
 	device_init_wakeup(&pdev->dev, true);
-	rtc->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
-				       &da9052_rtc_ops, THIS_MODULE);
-
+	rtc->rtc = devm_rtc_allocate_device(&pdev->dev);
 	if (IS_ERR(rtc->rtc))
 		return PTR_ERR(rtc->rtc);
 
+	rtc->rtc->ops = &da9052_rtc_ops;
+	rtc->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
+	rtc->rtc->range_max = RTC_TIMESTAMP_END_2063;
+
+	ret = rtc_register_device(rtc->rtc);
+	if (ret)
+		return ret;
+
 	ret = da9052_request_irq(rtc->da9052, DA9052_IRQ_ALARM, "ALM",
 				da9052_rtc_irq, rtc);
 	if (ret != 0) {
diff --git a/drivers/rtc/rtc-davinci.c b/drivers/rtc/rtc-davinci.c
index 390b735..73f87a1 100644
--- a/drivers/rtc/rtc-davinci.c
+++ b/drivers/rtc/rtc-davinci.c
@@ -227,7 +227,7 @@ davinci_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
 	return ret;
 }
 
-static int convertfromdays(u16 days, struct rtc_time *tm)
+static void convertfromdays(u16 days, struct rtc_time *tm)
 {
 	int tmp_days, year, mon;
 
@@ -250,24 +250,17 @@ static int convertfromdays(u16 days, struct rtc_time *tm)
 			break;
 		}
 	}
-	return 0;
 }
 
-static int convert2days(u16 *days, struct rtc_time *tm)
+static void convert2days(u16 *days, struct rtc_time *tm)
 {
 	int i;
 	*days = 0;
 
-	/* epoch == 1900 */
-	if (tm->tm_year < 100 || tm->tm_year > 199)
-		return -EINVAL;
-
 	for (i = 2000; i < 1900 + tm->tm_year; i++)
 		*days += rtc_year_days(1, 12, i);
 
 	*days += rtc_year_days(tm->tm_mday, tm->tm_mon, 1900 + tm->tm_year);
-
-	return 0;
 }
 
 static int davinci_rtc_read_time(struct device *dev, struct rtc_time *tm)
@@ -300,8 +293,7 @@ static int davinci_rtc_read_time(struct device *dev, struct rtc_time *tm)
 	days <<= 8;
 	days |= day0;
 
-	if (convertfromdays(days, tm) < 0)
-		return -EINVAL;
+	convertfromdays(days, tm);
 
 	return 0;
 }
@@ -313,8 +305,7 @@ static int davinci_rtc_set_time(struct device *dev, struct rtc_time *tm)
 	u8 rtc_cctrl;
 	unsigned long flags;
 
-	if (convert2days(&days, tm) < 0)
-		return -EINVAL;
+	convert2days(&days, tm);
 
 	spin_lock_irqsave(&davinci_rtc_lock, flags);
 
@@ -396,8 +387,7 @@ static int davinci_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
 	days <<= 8;
 	days |= day0;
 
-	if (convertfromdays(days, &alm->time) < 0)
-		return -EINVAL;
+	convertfromdays(days, &alm->time);
 
 	alm->pending = !!(rtcss_read(davinci_rtc,
 			  PRTCSS_RTC_CCTRL) &
@@ -413,29 +403,7 @@ static int davinci_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
 	unsigned long flags;
 	u16 days;
 
-	if (alm->time.tm_mday <= 0 && alm->time.tm_mon < 0
-	    && alm->time.tm_year < 0) {
-		struct rtc_time tm;
-		unsigned long now, then;
-
-		davinci_rtc_read_time(dev, &tm);
-		rtc_tm_to_time(&tm, &now);
-
-		alm->time.tm_mday = tm.tm_mday;
-		alm->time.tm_mon = tm.tm_mon;
-		alm->time.tm_year = tm.tm_year;
-		rtc_tm_to_time(&alm->time, &then);
-
-		if (then < now) {
-			rtc_time_to_tm(now + 24 * 60 * 60, &tm);
-			alm->time.tm_mday = tm.tm_mday;
-			alm->time.tm_mon = tm.tm_mon;
-			alm->time.tm_year = tm.tm_year;
-		}
-	}
-
-	if (convert2days(&days, &alm->time) < 0)
-		return -EINVAL;
+	convert2days(&days, &alm->time);
 
 	spin_lock_irqsave(&davinci_rtc_lock, flags);
 
@@ -485,13 +453,13 @@ static int __init davinci_rtc_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, davinci_rtc);
 
-	davinci_rtc->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
-				    &davinci_rtc_ops, THIS_MODULE);
-	if (IS_ERR(davinci_rtc->rtc)) {
-		dev_err(dev, "unable to register RTC device, err %d\n",
-				ret);
+	davinci_rtc->rtc = devm_rtc_allocate_device(&pdev->dev);
+	if (IS_ERR(davinci_rtc->rtc))
 		return PTR_ERR(davinci_rtc->rtc);
-	}
+
+	davinci_rtc->rtc->ops = &davinci_rtc_ops;
+	davinci_rtc->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
+	davinci_rtc->rtc->range_max = RTC_TIMESTAMP_BEGIN_2000 + (1 << 16) * 86400ULL - 1;
 
 	rtcif_write(davinci_rtc, PRTCIF_INTFLG_RTCSS, PRTCIF_INTFLG);
 	rtcif_write(davinci_rtc, 0, PRTCIF_INTEN);
@@ -516,7 +484,7 @@ static int __init davinci_rtc_probe(struct platform_device *pdev)
 
 	device_init_wakeup(&pdev->dev, 0);
 
-	return 0;
+	return rtc_register_device(davinci_rtc->rtc);
 }
 
 static int __exit davinci_rtc_remove(struct platform_device *pdev)
diff --git a/drivers/rtc/rtc-ds1305.c b/drivers/rtc/rtc-ds1305.c
index 4420fbf..a3d7908 100644
--- a/drivers/rtc/rtc-ds1305.c
+++ b/drivers/rtc/rtc-ds1305.c
@@ -325,17 +325,13 @@ static int ds1305_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
 	u8		buf[1 + DS1305_ALM_LEN];
 
 	/* convert desired alarm to time_t */
-	status = rtc_tm_to_time(&alm->time, &later);
-	if (status < 0)
-		return status;
+	later = rtc_tm_to_time64(&alm->time);
 
 	/* Read current time as time_t */
 	status = ds1305_get_time(dev, &tm);
 	if (status < 0)
 		return status;
-	status = rtc_tm_to_time(&tm, &now);
-	if (status < 0)
-		return status;
+	now = rtc_tm_to_time64(&tm);
 
 	/* make sure alarm fires within the next 24 hours */
 	if (later <= now)
@@ -694,6 +690,8 @@ static int ds1305_probe(struct spi_device *spi)
 		return PTR_ERR(ds1305->rtc);
 
 	ds1305->rtc->ops = &ds1305_ops;
+	ds1305->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
+	ds1305->rtc->range_max = RTC_TIMESTAMP_END_2099;
 
 	ds1305_nvmem_cfg.priv = ds1305;
 	ds1305->rtc->nvram_old_abi = true;
diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
index 1f7e8ae..4970294 100644
--- a/drivers/rtc/rtc-ds1307.c
+++ b/drivers/rtc/rtc-ds1307.c
@@ -22,6 +22,7 @@
 #include <linux/hwmon-sysfs.h>
 #include <linux/clk-provider.h>
 #include <linux/regmap.h>
+#include <linux/watchdog.h>
 
 /*
  * We can't determine type by probing, but if we expect pre-Linux code
@@ -144,6 +145,15 @@ enum ds_type {
 #	define M41TXX_BIT_CALIB_SIGN	BIT(5)
 #	define M41TXX_M_CALIBRATION	GENMASK(4, 0)
 
+#define DS1388_REG_WDOG_HUN_SECS	0x08
+#define DS1388_REG_WDOG_SECS		0x09
+#define DS1388_REG_FLAG			0x0b
+#	define DS1388_BIT_WF		BIT(6)
+#	define DS1388_BIT_OSF		BIT(7)
+#define DS1388_REG_CONTROL		0x0c
+#	define DS1388_BIT_RST		BIT(0)
+#	define DS1388_BIT_WDE		BIT(1)
+
 /* negative offset step is -2.034ppm */
 #define M41TXX_NEG_OFFSET_STEP_PPB	2034
 /* positive offset step is +4.068ppm */
@@ -252,6 +262,13 @@ static int ds1307_get_time(struct device *dev, struct rtc_time *t)
 		if (tmp & DS1340_BIT_OSF)
 			return -EINVAL;
 		break;
+	case ds_1388:
+		ret = regmap_read(ds1307->regmap, DS1388_REG_FLAG, &tmp);
+		if (ret)
+			return ret;
+		if (tmp & DS1388_BIT_OSF)
+			return -EINVAL;
+		break;
 	case mcp794xx:
 		if (!(tmp & MCP794XX_BIT_ST))
 			return -EINVAL;
@@ -845,6 +862,72 @@ static int m41txx_rtc_set_offset(struct device *dev, long offset)
 				  ctrl_reg);
 }
 
+#ifdef CONFIG_WATCHDOG_CORE
+static int ds1388_wdt_start(struct watchdog_device *wdt_dev)
+{
+	struct ds1307 *ds1307 = watchdog_get_drvdata(wdt_dev);
+	u8 regs[2];
+	int ret;
+
+	ret = regmap_update_bits(ds1307->regmap, DS1388_REG_FLAG,
+				 DS1388_BIT_WF, 0);
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(ds1307->regmap, DS1388_REG_CONTROL,
+				 DS1388_BIT_WDE | DS1388_BIT_RST, 0);
+	if (ret)
+		return ret;
+
+	/*
+	 * watchdog timeouts are measured in seconds. So ignore hundredths of
+	 * seconds field.
+	 */
+	regs[0] = 0;
+	regs[1] = bin2bcd(wdt_dev->timeout);
+
+	ret = regmap_bulk_write(ds1307->regmap, DS1388_REG_WDOG_HUN_SECS, regs,
+				sizeof(regs));
+	if (ret)
+		return ret;
+
+	return regmap_update_bits(ds1307->regmap, DS1388_REG_CONTROL,
+				  DS1388_BIT_WDE | DS1388_BIT_RST,
+				  DS1388_BIT_WDE | DS1388_BIT_RST);
+}
+
+static int ds1388_wdt_stop(struct watchdog_device *wdt_dev)
+{
+	struct ds1307 *ds1307 = watchdog_get_drvdata(wdt_dev);
+
+	return regmap_update_bits(ds1307->regmap, DS1388_REG_CONTROL,
+				  DS1388_BIT_WDE | DS1388_BIT_RST, 0);
+}
+
+static int ds1388_wdt_ping(struct watchdog_device *wdt_dev)
+{
+	struct ds1307 *ds1307 = watchdog_get_drvdata(wdt_dev);
+	u8 regs[2];
+
+	return regmap_bulk_read(ds1307->regmap, DS1388_REG_WDOG_HUN_SECS, regs,
+				sizeof(regs));
+}
+
+static int ds1388_wdt_set_timeout(struct watchdog_device *wdt_dev,
+				  unsigned int val)
+{
+	struct ds1307 *ds1307 = watchdog_get_drvdata(wdt_dev);
+	u8 regs[2];
+
+	wdt_dev->timeout = val;
+	regs[0] = 0;
+	regs[1] = bin2bcd(wdt_dev->timeout);
+
+	return regmap_bulk_write(ds1307->regmap, DS1388_REG_WDOG_HUN_SECS, regs,
+				 sizeof(regs));
+}
+#endif
+
 static const struct rtc_class_ops rx8130_rtc_ops = {
 	.read_time      = ds1307_get_time,
 	.set_time       = ds1307_set_time,
@@ -1567,6 +1650,48 @@ static void ds1307_clks_register(struct ds1307 *ds1307)
 
 #endif /* CONFIG_COMMON_CLK */
 
+#ifdef CONFIG_WATCHDOG_CORE
+static const struct watchdog_info ds1388_wdt_info = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+	.identity = "DS1388 watchdog",
+};
+
+static const struct watchdog_ops ds1388_wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = ds1388_wdt_start,
+	.stop = ds1388_wdt_stop,
+	.ping = ds1388_wdt_ping,
+	.set_timeout = ds1388_wdt_set_timeout,
+
+};
+
+static void ds1307_wdt_register(struct ds1307 *ds1307)
+{
+	struct watchdog_device	*wdt;
+
+	if (ds1307->type != ds_1388)
+		return;
+
+	wdt = devm_kzalloc(ds1307->dev, sizeof(*wdt), GFP_KERNEL);
+	if (!wdt)
+		return;
+
+	wdt->info = &ds1388_wdt_info;
+	wdt->ops = &ds1388_wdt_ops;
+	wdt->timeout = 99;
+	wdt->max_timeout = 99;
+	wdt->min_timeout = 1;
+
+	watchdog_init_timeout(wdt, 0, ds1307->dev);
+	watchdog_set_drvdata(wdt, ds1307);
+	devm_watchdog_register_device(ds1307->dev, wdt);
+}
+#else
+static void ds1307_wdt_register(struct ds1307 *ds1307)
+{
+}
+#endif /* CONFIG_WATCHDOG_CORE */
+
 static const struct regmap_config regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
@@ -1856,6 +1981,7 @@ static int ds1307_probe(struct i2c_client *client,
 
 	ds1307_hwmon_register(ds1307);
 	ds1307_clks_register(ds1307);
+	ds1307_wdt_register(ds1307);
 
 	return 0;
 
diff --git a/drivers/rtc/rtc-ds1374.c b/drivers/rtc/rtc-ds1374.c
index 6e9ddcd..9c51a12 100644
--- a/drivers/rtc/rtc-ds1374.c
+++ b/drivers/rtc/rtc-ds1374.c
@@ -164,7 +164,7 @@ static int ds1374_read_time(struct device *dev, struct rtc_time *time)
 
 	ret = ds1374_read_rtc(client, &itime, DS1374_REG_TOD0, 4);
 	if (!ret)
-		rtc_time_to_tm(itime, time);
+		rtc_time64_to_tm(itime, time);
 
 	return ret;
 }
@@ -172,9 +172,8 @@ static int ds1374_read_time(struct device *dev, struct rtc_time *time)
 static int ds1374_set_time(struct device *dev, struct rtc_time *time)
 {
 	struct i2c_client *client = to_i2c_client(dev);
-	unsigned long itime;
+	unsigned long itime = rtc_tm_to_time64(time);
 
-	rtc_tm_to_time(time, &itime);
 	return ds1374_write_rtc(client, itime, DS1374_REG_TOD0, 4);
 }
 
@@ -212,7 +211,7 @@ static int ds1374_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 	if (ret)
 		goto out;
 
-	rtc_time_to_tm(now + cur_alarm, &alarm->time);
+	rtc_time64_to_tm(now + cur_alarm, &alarm->time);
 	alarm->enabled = !!(cr & DS1374_REG_CR_WACE);
 	alarm->pending = !!(sr & DS1374_REG_SR_AF);
 
@@ -237,8 +236,8 @@ static int ds1374_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 	if (ret < 0)
 		return ret;
 
-	rtc_tm_to_time(&alarm->time, &new_alarm);
-	rtc_tm_to_time(&now, &itime);
+	new_alarm = rtc_tm_to_time64(&alarm->time);
+	itime = rtc_tm_to_time64(&now);
 
 	/* This can happen due to races, in addition to dates that are
 	 * truly in the past.  To avoid requiring the caller to check for
@@ -620,6 +619,10 @@ static int ds1374_probe(struct i2c_client *client,
 	if (!ds1374)
 		return -ENOMEM;
 
+	ds1374->rtc = devm_rtc_allocate_device(&client->dev);
+	if (IS_ERR(ds1374->rtc))
+		return PTR_ERR(ds1374->rtc);
+
 	ds1374->client = client;
 	i2c_set_clientdata(client, ds1374);
 
@@ -641,12 +644,12 @@ static int ds1374_probe(struct i2c_client *client,
 		device_set_wakeup_capable(&client->dev, 1);
 	}
 
-	ds1374->rtc = devm_rtc_device_register(&client->dev, client->name,
-						&ds1374_rtc_ops, THIS_MODULE);
-	if (IS_ERR(ds1374->rtc)) {
-		dev_err(&client->dev, "unable to register the class device\n");
-		return PTR_ERR(ds1374->rtc);
-	}
+	ds1374->rtc->ops = &ds1374_rtc_ops;
+	ds1374->rtc->range_max = U32_MAX;
+
+	ret = rtc_register_device(ds1374->rtc);
+	if (ret)
+		return ret;
 
 #ifdef CONFIG_RTC_DRV_DS1374_WDT
 	save_client = client;
diff --git a/drivers/rtc/rtc-fsl-ftm-alarm.c b/drivers/rtc/rtc-fsl-ftm-alarm.c
index 9e6e994..756af62 100644
--- a/drivers/rtc/rtc-fsl-ftm-alarm.c
+++ b/drivers/rtc/rtc-fsl-ftm-alarm.c
@@ -20,6 +20,7 @@
 #include <linux/fsl/ftm.h>
 #include <linux/rtc.h>
 #include <linux/time.h>
+#include <linux/acpi.h>
 
 #define FTM_SC_CLK(c)		((c) << FTM_SC_CLK_MASK_SHIFT)
 
@@ -151,6 +152,8 @@ static irqreturn_t ftm_rtc_alarm_interrupt(int irq, void *dev)
 {
 	struct ftm_rtc *rtc = dev;
 
+	rtc_update_irq(rtc->rtc_dev, 1, RTC_IRQF | RTC_AF);
+
 	ftm_irq_acknowledge(rtc);
 	ftm_irq_disable(rtc);
 	ftm_clean_alarm(rtc);
@@ -242,7 +245,6 @@ static const struct rtc_class_ops ftm_rtc_ops = {
 
 static int ftm_rtc_probe(struct platform_device *pdev)
 {
-	struct device_node *np = pdev->dev.of_node;
 	int irq;
 	int ret;
 	struct ftm_rtc *rtc;
@@ -265,10 +267,10 @@ static int ftm_rtc_probe(struct platform_device *pdev)
 		return PTR_ERR(rtc->base);
 	}
 
-	irq = irq_of_parse_and_map(np, 0);
-	if (irq <= 0) {
-		dev_err(&pdev->dev, "unable to get IRQ from DT, %d\n", irq);
-		return -EINVAL;
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "can't get irq number\n");
+		return irq;
 	}
 
 	ret = devm_request_irq(&pdev->dev, irq, ftm_rtc_alarm_interrupt,
@@ -278,7 +280,9 @@ static int ftm_rtc_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	rtc->big_endian = of_property_read_bool(np, "big-endian");
+	rtc->big_endian =
+		device_property_read_bool(&pdev->dev, "big-endian");
+
 	rtc->alarm_freq = (u32)FIXED_FREQ_CLK / (u32)MAX_FREQ_DIV;
 	rtc->rtc_dev->ops = &ftm_rtc_ops;
 
@@ -305,11 +309,18 @@ static const struct of_device_id ftm_rtc_match[] = {
 	{ },
 };
 
+static const struct acpi_device_id ftm_imx_acpi_ids[] = {
+	{"NXP0011",},
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, ftm_imx_acpi_ids);
+
 static struct platform_driver ftm_rtc_driver = {
 	.probe		= ftm_rtc_probe,
 	.driver		= {
 		.name	= "ftm-alarm",
 		.of_match_table = ftm_rtc_match,
+		.acpi_match_table = ACPI_PTR(ftm_imx_acpi_ids),
 	},
 };
 
diff --git a/drivers/rtc/rtc-imx-sc.c b/drivers/rtc/rtc-imx-sc.c
index cf2c121..a5f59e6 100644
--- a/drivers/rtc/rtc-imx-sc.c
+++ b/drivers/rtc/rtc-imx-sc.c
@@ -37,7 +37,7 @@ struct imx_sc_msg_timer_rtc_set_alarm {
 	u8 hour;
 	u8 min;
 	u8 sec;
-} __packed;
+} __packed __aligned(4);
 
 static int imx_sc_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
diff --git a/drivers/rtc/rtc-jz4740.c b/drivers/rtc/rtc-jz4740.c
index 18023e4..e4c7190 100644
--- a/drivers/rtc/rtc-jz4740.c
+++ b/drivers/rtc/rtc-jz4740.c
@@ -46,6 +46,7 @@
 
 enum jz4740_rtc_type {
 	ID_JZ4740,
+	ID_JZ4760,
 	ID_JZ4780,
 };
 
@@ -106,7 +107,7 @@ static inline int jz4740_rtc_reg_write(struct jz4740_rtc *rtc, size_t reg,
 {
 	int ret = 0;
 
-	if (rtc->type >= ID_JZ4780)
+	if (rtc->type >= ID_JZ4760)
 		ret = jz4780_rtc_enable_write(rtc);
 	if (ret == 0)
 		ret = jz4740_rtc_wait_write_ready(rtc);
@@ -298,6 +299,7 @@ static void jz4740_rtc_power_off(void)
 
 static const struct of_device_id jz4740_rtc_of_match[] = {
 	{ .compatible = "ingenic,jz4740-rtc", .data = (void *)ID_JZ4740 },
+	{ .compatible = "ingenic,jz4760-rtc", .data = (void *)ID_JZ4760 },
 	{ .compatible = "ingenic,jz4780-rtc", .data = (void *)ID_JZ4780 },
 	{},
 };
@@ -372,13 +374,14 @@ static int jz4740_rtc_probe(struct platform_device *pdev)
 		if (!pm_power_off) {
 			/* Default: 60ms */
 			rtc->reset_pin_assert_time = 60;
-			of_property_read_u32(np, "reset-pin-assert-time-ms",
+			of_property_read_u32(np,
+					     "ingenic,reset-pin-assert-time-ms",
 					     &rtc->reset_pin_assert_time);
 
 			/* Default: 100ms */
 			rtc->min_wakeup_pin_assert_time = 100;
 			of_property_read_u32(np,
-					     "min-wakeup-pin-assert-time-ms",
+					     "ingenic,min-wakeup-pin-assert-time-ms",
 					     &rtc->min_wakeup_pin_assert_time);
 
 			dev_for_power_off = &pdev->dev;
diff --git a/drivers/rtc/rtc-m48t35.c b/drivers/rtc/rtc-m48t35.c
index e8194f1..92f19bf 100644
--- a/drivers/rtc/rtc-m48t35.c
+++ b/drivers/rtc/rtc-m48t35.c
@@ -160,15 +160,10 @@ static int m48t35_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	priv->size = resource_size(res);
-	/*
-	 * kludge: remove the #ifndef after ioc3 resource
-	 * conflicts are resolved
-	 */
-#ifndef CONFIG_SGI_IP27
 	if (!devm_request_mem_region(&pdev->dev, res->start, priv->size,
 				     pdev->name))
 		return -EBUSY;
-#endif
+
 	priv->baseaddr = res->start;
 	priv->reg = devm_ioremap(&pdev->dev, priv->baseaddr, priv->size);
 	if (!priv->reg)
diff --git a/drivers/rtc/rtc-mpc5121.c b/drivers/rtc/rtc-mpc5121.c
index 15a9d02..3040844 100644
--- a/drivers/rtc/rtc-mpc5121.c
+++ b/drivers/rtc/rtc-mpc5121.c
@@ -111,7 +111,7 @@ static int mpc5121_rtc_read_time(struct device *dev, struct rtc_time *tm)
 	 */
 	now = in_be32(&regs->actual_time) + in_be32(&regs->target_time);
 
-	rtc_time_to_tm(now, tm);
+	rtc_time64_to_tm(now, tm);
 
 	/*
 	 * update second minute hour registers
@@ -126,16 +126,14 @@ static int mpc5121_rtc_set_time(struct device *dev, struct rtc_time *tm)
 {
 	struct mpc5121_rtc_data *rtc = dev_get_drvdata(dev);
 	struct mpc5121_rtc_regs __iomem *regs = rtc->regs;
-	int ret;
 	unsigned long now;
 
 	/*
 	 * The actual_time register is read only so we write the offset
 	 * between it and linux time to the target_time register.
 	 */
-	ret = rtc_tm_to_time(tm, &now);
-	if (ret == 0)
-		out_be32(&regs->target_time, now - in_be32(&regs->actual_time));
+	now = rtc_tm_to_time64(tm);
+	out_be32(&regs->target_time, now - in_be32(&regs->actual_time));
 
 	/*
 	 * update second minute hour registers
@@ -315,8 +313,8 @@ static int mpc5121_rtc_probe(struct platform_device *op)
 	if (!rtc)
 		return -ENOMEM;
 
-	rtc->regs = of_iomap(op->dev.of_node, 0);
-	if (!rtc->regs) {
+	rtc->regs = devm_platform_ioremap_resource(op, 0);
+	if (IS_ERR(rtc->regs)) {
 		dev_err(&op->dev, "%s: couldn't map io space\n", __func__);
 		return -ENOSYS;
 	}
@@ -326,8 +324,8 @@ static int mpc5121_rtc_probe(struct platform_device *op)
 	platform_set_drvdata(op, rtc);
 
 	rtc->irq = irq_of_parse_and_map(op->dev.of_node, 1);
-	err = request_irq(rtc->irq, mpc5121_rtc_handler, 0,
-						"mpc5121-rtc", &op->dev);
+	err = devm_request_irq(&op->dev, rtc->irq, mpc5121_rtc_handler, 0,
+			       "mpc5121-rtc", &op->dev);
 	if (err) {
 		dev_err(&op->dev, "%s: could not request irq: %i\n",
 							__func__, rtc->irq);
@@ -335,14 +333,26 @@ static int mpc5121_rtc_probe(struct platform_device *op)
 	}
 
 	rtc->irq_periodic = irq_of_parse_and_map(op->dev.of_node, 0);
-	err = request_irq(rtc->irq_periodic, mpc5121_rtc_handler_upd,
-				0, "mpc5121-rtc_upd", &op->dev);
+	err = devm_request_irq(&op->dev, rtc->irq_periodic,
+			       mpc5121_rtc_handler_upd, 0, "mpc5121-rtc_upd",
+			       &op->dev);
 	if (err) {
 		dev_err(&op->dev, "%s: could not request irq: %i\n",
 						__func__, rtc->irq_periodic);
 		goto out_dispose2;
 	}
 
+	rtc->rtc = devm_rtc_allocate_device(&op->dev);
+	if (IS_ERR(rtc->rtc)) {
+		err = PTR_ERR(rtc->rtc);
+		goto out_dispose2;
+	}
+
+	rtc->rtc->ops = &mpc5200_rtc_ops;
+	rtc->rtc->uie_unsupported = 1;
+	rtc->rtc->range_min = RTC_TIMESTAMP_BEGIN_0000;
+	rtc->rtc->range_max = 65733206399ULL; /* 4052-12-31 23:59:59 */
+
 	if (of_device_is_compatible(op->dev.of_node, "fsl,mpc5121-rtc")) {
 		u32 ka;
 		ka = in_be32(&rtc->regs->keep_alive);
@@ -351,30 +361,26 @@ static int mpc5121_rtc_probe(struct platform_device *op)
 				"mpc5121-rtc: Battery or oscillator failure!\n");
 			out_be32(&rtc->regs->keep_alive, ka);
 		}
-
-		rtc->rtc = devm_rtc_device_register(&op->dev, "mpc5121-rtc",
-						&mpc5121_rtc_ops, THIS_MODULE);
-	} else {
-		rtc->rtc = devm_rtc_device_register(&op->dev, "mpc5200-rtc",
-						&mpc5200_rtc_ops, THIS_MODULE);
+		rtc->rtc->ops = &mpc5121_rtc_ops;
+		/*
+		 * This is a limitation of the driver that abuses the target
+		 * time register, the actual maximum year for the mpc5121 is
+		 * also 4052.
+		 */
+		rtc->rtc->range_min = 0;
+		rtc->rtc->range_max = U32_MAX;
 	}
 
-	if (IS_ERR(rtc->rtc)) {
-		err = PTR_ERR(rtc->rtc);
-		goto out_free_irq;
-	}
-	rtc->rtc->uie_unsupported = 1;
+	err = rtc_register_device(rtc->rtc);
+	if (err)
+		goto out_dispose2;
 
 	return 0;
 
-out_free_irq:
-	free_irq(rtc->irq_periodic, &op->dev);
 out_dispose2:
 	irq_dispose_mapping(rtc->irq_periodic);
-	free_irq(rtc->irq, &op->dev);
 out_dispose:
 	irq_dispose_mapping(rtc->irq);
-	iounmap(rtc->regs);
 
 	return err;
 }
@@ -388,9 +394,6 @@ static int mpc5121_rtc_remove(struct platform_device *op)
 	out_8(&regs->alm_enable, 0);
 	out_8(&regs->int_enable, in_8(&regs->int_enable) & ~0x1);
 
-	iounmap(rtc->regs);
-	free_irq(rtc->irq, &op->dev);
-	free_irq(rtc->irq_periodic, &op->dev);
 	irq_dispose_mapping(rtc->irq);
 	irq_dispose_mapping(rtc->irq_periodic);
 
diff --git a/drivers/rtc/rtc-mt2712.c b/drivers/rtc/rtc-mt2712.c
new file mode 100644
index 0000000..581b873
--- /dev/null
+++ b/drivers/rtc/rtc-mt2712.c
@@ -0,0 +1,423 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 MediaTek Inc.
+ * Author: Ran Bi <ran.bi@mediatek.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/irqdomain.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+
+#define MT2712_BBPU		0x0000
+#define MT2712_BBPU_CLRPKY	BIT(4)
+#define MT2712_BBPU_RELOAD	BIT(5)
+#define MT2712_BBPU_CBUSY	BIT(6)
+#define MT2712_BBPU_KEY		(0x43 << 8)
+
+#define MT2712_IRQ_STA		0x0004
+#define MT2712_IRQ_STA_AL	BIT(0)
+#define MT2712_IRQ_STA_TC	BIT(1)
+
+#define MT2712_IRQ_EN		0x0008
+#define MT2712_IRQ_EN_AL	BIT(0)
+#define MT2712_IRQ_EN_TC	BIT(1)
+#define MT2712_IRQ_EN_ONESHOT	BIT(2)
+
+#define MT2712_CII_EN		0x000c
+
+#define MT2712_AL_MASK		0x0010
+#define MT2712_AL_MASK_DOW	BIT(4)
+
+#define MT2712_TC_SEC		0x0014
+#define MT2712_TC_MIN		0x0018
+#define MT2712_TC_HOU		0x001c
+#define MT2712_TC_DOM		0x0020
+#define MT2712_TC_DOW		0x0024
+#define MT2712_TC_MTH		0x0028
+#define MT2712_TC_YEA		0x002c
+
+#define MT2712_AL_SEC		0x0030
+#define MT2712_AL_MIN		0x0034
+#define MT2712_AL_HOU		0x0038
+#define MT2712_AL_DOM		0x003c
+#define MT2712_AL_DOW		0x0040
+#define MT2712_AL_MTH		0x0044
+#define MT2712_AL_YEA		0x0048
+
+#define MT2712_SEC_MASK		0x003f
+#define MT2712_MIN_MASK		0x003f
+#define MT2712_HOU_MASK		0x001f
+#define MT2712_DOM_MASK		0x001f
+#define MT2712_DOW_MASK		0x0007
+#define MT2712_MTH_MASK		0x000f
+#define MT2712_YEA_MASK		0x007f
+
+#define MT2712_POWERKEY1	0x004c
+#define MT2712_POWERKEY2	0x0050
+#define MT2712_POWERKEY1_KEY	0xa357
+#define MT2712_POWERKEY2_KEY	0x67d2
+
+#define MT2712_CON0		0x005c
+#define MT2712_CON1		0x0060
+
+#define MT2712_PROT		0x0070
+#define MT2712_PROT_UNLOCK1	0x9136
+#define MT2712_PROT_UNLOCK2	0x586a
+
+#define MT2712_WRTGR		0x0078
+
+#define MT2712_RTC_TIMESTAMP_END_2127	4985971199LL
+
+struct mt2712_rtc {
+	struct rtc_device	*rtc;
+	void __iomem		*base;
+	int			irq;
+	u8			irq_wake_enabled;
+	u8			powerlost;
+};
+
+static inline u32 mt2712_readl(struct mt2712_rtc *mt2712_rtc, u32 reg)
+{
+	return readl(mt2712_rtc->base + reg);
+}
+
+static inline void mt2712_writel(struct mt2712_rtc *mt2712_rtc,
+				 u32 reg, u32 val)
+{
+	writel(val, mt2712_rtc->base + reg);
+}
+
+static void mt2712_rtc_write_trigger(struct mt2712_rtc *mt2712_rtc)
+{
+	unsigned long timeout = jiffies + HZ / 10;
+
+	mt2712_writel(mt2712_rtc, MT2712_WRTGR, 1);
+	while (1) {
+		if (!(mt2712_readl(mt2712_rtc, MT2712_BBPU)
+					& MT2712_BBPU_CBUSY))
+			break;
+
+		if (time_after(jiffies, timeout)) {
+			dev_err(&mt2712_rtc->rtc->dev,
+				"%s time out!\n", __func__);
+			break;
+		}
+		cpu_relax();
+	}
+}
+
+static void mt2712_rtc_writeif_unlock(struct mt2712_rtc *mt2712_rtc)
+{
+	mt2712_writel(mt2712_rtc, MT2712_PROT, MT2712_PROT_UNLOCK1);
+	mt2712_rtc_write_trigger(mt2712_rtc);
+	mt2712_writel(mt2712_rtc, MT2712_PROT, MT2712_PROT_UNLOCK2);
+	mt2712_rtc_write_trigger(mt2712_rtc);
+}
+
+static irqreturn_t rtc_irq_handler_thread(int irq, void *data)
+{
+	struct mt2712_rtc *mt2712_rtc = data;
+	u16 irqsta;
+
+	/* Clear interrupt */
+	irqsta = mt2712_readl(mt2712_rtc, MT2712_IRQ_STA);
+	if (irqsta & MT2712_IRQ_STA_AL) {
+		rtc_update_irq(mt2712_rtc->rtc, 1, RTC_IRQF | RTC_AF);
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_NONE;
+}
+
+static void __mt2712_rtc_read_time(struct mt2712_rtc *mt2712_rtc,
+				   struct rtc_time *tm, int *sec)
+{
+	tm->tm_sec  = mt2712_readl(mt2712_rtc, MT2712_TC_SEC)
+			& MT2712_SEC_MASK;
+	tm->tm_min  = mt2712_readl(mt2712_rtc, MT2712_TC_MIN)
+			& MT2712_MIN_MASK;
+	tm->tm_hour = mt2712_readl(mt2712_rtc, MT2712_TC_HOU)
+			& MT2712_HOU_MASK;
+	tm->tm_mday = mt2712_readl(mt2712_rtc, MT2712_TC_DOM)
+			& MT2712_DOM_MASK;
+	tm->tm_mon  = (mt2712_readl(mt2712_rtc, MT2712_TC_MTH) - 1)
+			& MT2712_MTH_MASK;
+	tm->tm_year = (mt2712_readl(mt2712_rtc, MT2712_TC_YEA) + 100)
+			& MT2712_YEA_MASK;
+
+	*sec = mt2712_readl(mt2712_rtc, MT2712_TC_SEC) & MT2712_SEC_MASK;
+}
+
+static int mt2712_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct mt2712_rtc *mt2712_rtc = dev_get_drvdata(dev);
+	int sec;
+
+	if (mt2712_rtc->powerlost)
+		return -EINVAL;
+
+	do {
+		__mt2712_rtc_read_time(mt2712_rtc, tm, &sec);
+	} while (sec < tm->tm_sec);	/* SEC has carried */
+
+	return 0;
+}
+
+static int mt2712_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct mt2712_rtc *mt2712_rtc = dev_get_drvdata(dev);
+
+	mt2712_writel(mt2712_rtc, MT2712_TC_SEC, tm->tm_sec  & MT2712_SEC_MASK);
+	mt2712_writel(mt2712_rtc, MT2712_TC_MIN, tm->tm_min  & MT2712_MIN_MASK);
+	mt2712_writel(mt2712_rtc, MT2712_TC_HOU, tm->tm_hour & MT2712_HOU_MASK);
+	mt2712_writel(mt2712_rtc, MT2712_TC_DOM, tm->tm_mday & MT2712_DOM_MASK);
+	mt2712_writel(mt2712_rtc, MT2712_TC_MTH,
+		      (tm->tm_mon + 1) & MT2712_MTH_MASK);
+	mt2712_writel(mt2712_rtc, MT2712_TC_YEA,
+		      (tm->tm_year - 100) & MT2712_YEA_MASK);
+
+	mt2712_rtc_write_trigger(mt2712_rtc);
+
+	if (mt2712_rtc->powerlost)
+		mt2712_rtc->powerlost = false;
+
+	return 0;
+}
+
+static int mt2712_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+	struct mt2712_rtc *mt2712_rtc = dev_get_drvdata(dev);
+	struct rtc_time *tm = &alm->time;
+	u16 irqen;
+
+	irqen = mt2712_readl(mt2712_rtc, MT2712_IRQ_EN);
+	alm->enabled = !!(irqen & MT2712_IRQ_EN_AL);
+
+	tm->tm_sec  = mt2712_readl(mt2712_rtc, MT2712_AL_SEC) & MT2712_SEC_MASK;
+	tm->tm_min  = mt2712_readl(mt2712_rtc, MT2712_AL_MIN) & MT2712_MIN_MASK;
+	tm->tm_hour = mt2712_readl(mt2712_rtc, MT2712_AL_HOU) & MT2712_HOU_MASK;
+	tm->tm_mday = mt2712_readl(mt2712_rtc, MT2712_AL_DOM) & MT2712_DOM_MASK;
+	tm->tm_mon  = (mt2712_readl(mt2712_rtc, MT2712_AL_MTH) - 1)
+		      & MT2712_MTH_MASK;
+	tm->tm_year = (mt2712_readl(mt2712_rtc, MT2712_AL_YEA) + 100)
+		      & MT2712_YEA_MASK;
+
+	return 0;
+}
+
+static int mt2712_rtc_alarm_irq_enable(struct device *dev,
+				       unsigned int enabled)
+{
+	struct mt2712_rtc *mt2712_rtc = dev_get_drvdata(dev);
+	u16 irqen;
+
+	irqen = mt2712_readl(mt2712_rtc, MT2712_IRQ_EN);
+	if (enabled)
+		irqen |= MT2712_IRQ_EN_AL;
+	else
+		irqen &= ~MT2712_IRQ_EN_AL;
+	mt2712_writel(mt2712_rtc, MT2712_IRQ_EN, irqen);
+	mt2712_rtc_write_trigger(mt2712_rtc);
+
+	return 0;
+}
+
+static int mt2712_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+	struct mt2712_rtc *mt2712_rtc = dev_get_drvdata(dev);
+	struct rtc_time *tm = &alm->time;
+
+	dev_dbg(&mt2712_rtc->rtc->dev, "set al time: %ptR, alm en: %d\n",
+		tm, alm->enabled);
+
+	mt2712_writel(mt2712_rtc, MT2712_AL_SEC,
+		      (mt2712_readl(mt2712_rtc, MT2712_AL_SEC)
+		       & ~(MT2712_SEC_MASK)) | (tm->tm_sec  & MT2712_SEC_MASK));
+	mt2712_writel(mt2712_rtc, MT2712_AL_MIN,
+		      (mt2712_readl(mt2712_rtc, MT2712_AL_MIN)
+		       & ~(MT2712_MIN_MASK)) | (tm->tm_min  & MT2712_MIN_MASK));
+	mt2712_writel(mt2712_rtc, MT2712_AL_HOU,
+		      (mt2712_readl(mt2712_rtc, MT2712_AL_HOU)
+		       & ~(MT2712_HOU_MASK)) | (tm->tm_hour & MT2712_HOU_MASK));
+	mt2712_writel(mt2712_rtc, MT2712_AL_DOM,
+		      (mt2712_readl(mt2712_rtc, MT2712_AL_DOM)
+		       & ~(MT2712_DOM_MASK)) | (tm->tm_mday & MT2712_DOM_MASK));
+	mt2712_writel(mt2712_rtc, MT2712_AL_MTH,
+		      (mt2712_readl(mt2712_rtc, MT2712_AL_MTH)
+		       & ~(MT2712_MTH_MASK))
+		      | ((tm->tm_mon + 1) & MT2712_MTH_MASK));
+	mt2712_writel(mt2712_rtc, MT2712_AL_YEA,
+		      (mt2712_readl(mt2712_rtc, MT2712_AL_YEA)
+		       & ~(MT2712_YEA_MASK))
+		      | ((tm->tm_year - 100) & MT2712_YEA_MASK));
+
+	/* mask day of week */
+	mt2712_writel(mt2712_rtc, MT2712_AL_MASK, MT2712_AL_MASK_DOW);
+	mt2712_rtc_write_trigger(mt2712_rtc);
+
+	mt2712_rtc_alarm_irq_enable(dev, alm->enabled);
+
+	return 0;
+}
+
+/* Init RTC register */
+static void mt2712_rtc_hw_init(struct mt2712_rtc *mt2712_rtc)
+{
+	u32 p1, p2;
+
+	mt2712_writel(mt2712_rtc, MT2712_BBPU,
+		      MT2712_BBPU_KEY | MT2712_BBPU_RELOAD);
+
+	mt2712_writel(mt2712_rtc, MT2712_CII_EN, 0);
+	mt2712_writel(mt2712_rtc, MT2712_AL_MASK, 0);
+	/* necessary before set MT2712_POWERKEY */
+	mt2712_writel(mt2712_rtc, MT2712_CON0, 0x4848);
+	mt2712_writel(mt2712_rtc, MT2712_CON1, 0x0048);
+
+	mt2712_rtc_write_trigger(mt2712_rtc);
+
+	p1 = mt2712_readl(mt2712_rtc, MT2712_POWERKEY1);
+	p2 = mt2712_readl(mt2712_rtc, MT2712_POWERKEY2);
+	if (p1 != MT2712_POWERKEY1_KEY || p2 != MT2712_POWERKEY2_KEY) {
+		mt2712_rtc->powerlost = true;
+		dev_dbg(&mt2712_rtc->rtc->dev,
+			"powerkey not set (lost power)\n");
+	} else {
+		mt2712_rtc->powerlost = false;
+	}
+
+	/* RTC need POWERKEY1/2 match, then goto normal work mode */
+	mt2712_writel(mt2712_rtc, MT2712_POWERKEY1, MT2712_POWERKEY1_KEY);
+	mt2712_writel(mt2712_rtc, MT2712_POWERKEY2, MT2712_POWERKEY2_KEY);
+	mt2712_rtc_write_trigger(mt2712_rtc);
+
+	mt2712_rtc_writeif_unlock(mt2712_rtc);
+}
+
+static const struct rtc_class_ops mt2712_rtc_ops = {
+	.read_time	= mt2712_rtc_read_time,
+	.set_time	= mt2712_rtc_set_time,
+	.read_alarm	= mt2712_rtc_read_alarm,
+	.set_alarm	= mt2712_rtc_set_alarm,
+	.alarm_irq_enable = mt2712_rtc_alarm_irq_enable,
+};
+
+static int mt2712_rtc_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct mt2712_rtc *mt2712_rtc;
+	int ret;
+
+	mt2712_rtc = devm_kzalloc(&pdev->dev,
+				  sizeof(struct mt2712_rtc), GFP_KERNEL);
+	if (!mt2712_rtc)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	mt2712_rtc->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(mt2712_rtc->base))
+		return PTR_ERR(mt2712_rtc->base);
+
+	/* rtc hw init */
+	mt2712_rtc_hw_init(mt2712_rtc);
+
+	mt2712_rtc->irq = platform_get_irq(pdev, 0);
+	if (mt2712_rtc->irq < 0) {
+		dev_err(&pdev->dev, "No IRQ resource\n");
+		return mt2712_rtc->irq;
+	}
+
+	platform_set_drvdata(pdev, mt2712_rtc);
+
+	mt2712_rtc->rtc = devm_rtc_allocate_device(&pdev->dev);
+	if (IS_ERR(mt2712_rtc->rtc))
+		return PTR_ERR(mt2712_rtc->rtc);
+
+	ret = devm_request_threaded_irq(&pdev->dev, mt2712_rtc->irq, NULL,
+					rtc_irq_handler_thread,
+					IRQF_ONESHOT | IRQF_TRIGGER_LOW,
+					dev_name(&mt2712_rtc->rtc->dev),
+					mt2712_rtc);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to request alarm IRQ: %d: %d\n",
+			mt2712_rtc->irq, ret);
+		return ret;
+	}
+
+	device_init_wakeup(&pdev->dev, true);
+
+	mt2712_rtc->rtc->ops = &mt2712_rtc_ops;
+	mt2712_rtc->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
+	mt2712_rtc->rtc->range_max = MT2712_RTC_TIMESTAMP_END_2127;
+
+	ret = rtc_register_device(mt2712_rtc->rtc);
+	if (ret) {
+		dev_err(&pdev->dev, "register rtc device failed\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int mt2712_rtc_suspend(struct device *dev)
+{
+	int wake_status = 0;
+	struct mt2712_rtc *mt2712_rtc = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev)) {
+		wake_status = enable_irq_wake(mt2712_rtc->irq);
+		if (!wake_status)
+			mt2712_rtc->irq_wake_enabled = true;
+	}
+
+	return 0;
+}
+
+static int mt2712_rtc_resume(struct device *dev)
+{
+	int wake_status = 0;
+	struct mt2712_rtc *mt2712_rtc = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev) && mt2712_rtc->irq_wake_enabled) {
+		wake_status = disable_irq_wake(mt2712_rtc->irq);
+		if (!wake_status)
+			mt2712_rtc->irq_wake_enabled = false;
+	}
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(mt2712_pm_ops, mt2712_rtc_suspend,
+			 mt2712_rtc_resume);
+#endif
+
+static const struct of_device_id mt2712_rtc_of_match[] = {
+	{ .compatible = "mediatek,mt2712-rtc", },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(of, mt2712_rtc_of_match);
+
+static struct platform_driver mt2712_rtc_driver = {
+	.driver = {
+		.name = "mt2712-rtc",
+		.of_match_table = mt2712_rtc_of_match,
+#ifdef CONFIG_PM_SLEEP
+		.pm = &mt2712_pm_ops,
+#endif
+	},
+	.probe  = mt2712_rtc_probe,
+};
+
+module_platform_driver(mt2712_rtc_driver);
+
+MODULE_DESCRIPTION("MediaTek MT2712 SoC based RTC Driver");
+MODULE_AUTHOR("Ran Bi <ran.bi@mediatek.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/rtc/rtc-mxc.c b/drivers/rtc/rtc-mxc.c
index 902d57d..a8cfbde 100644
--- a/drivers/rtc/rtc-mxc.c
+++ b/drivers/rtc/rtc-mxc.c
@@ -307,6 +307,14 @@ static const struct rtc_class_ops mxc_rtc_ops = {
 	.alarm_irq_enable	= mxc_rtc_alarm_irq_enable,
 };
 
+static void mxc_rtc_action(void *p)
+{
+	struct rtc_plat_data *pdata = p;
+
+	clk_disable_unprepare(pdata->clk_ref);
+	clk_disable_unprepare(pdata->clk_ipg);
+}
+
 static int mxc_rtc_probe(struct platform_device *pdev)
 {
 	struct rtc_device *rtc;
@@ -366,14 +374,20 @@ static int mxc_rtc_probe(struct platform_device *pdev)
 
 	pdata->clk_ref = devm_clk_get(&pdev->dev, "ref");
 	if (IS_ERR(pdata->clk_ref)) {
+		clk_disable_unprepare(pdata->clk_ipg);
 		dev_err(&pdev->dev, "unable to get ref clock!\n");
-		ret = PTR_ERR(pdata->clk_ref);
-		goto exit_put_clk_ipg;
+		return PTR_ERR(pdata->clk_ref);
 	}
 
 	ret = clk_prepare_enable(pdata->clk_ref);
+	if (ret) {
+		clk_disable_unprepare(pdata->clk_ipg);
+		return ret;
+	}
+
+	ret = devm_add_action_or_reset(&pdev->dev, mxc_rtc_action, pdata);
 	if (ret)
-		goto exit_put_clk_ipg;
+		return ret;
 
 	rate = clk_get_rate(pdata->clk_ref);
 
@@ -385,16 +399,14 @@ static int mxc_rtc_probe(struct platform_device *pdev)
 		reg = RTC_INPUT_CLK_38400HZ;
 	else {
 		dev_err(&pdev->dev, "rtc clock is not valid (%lu)\n", rate);
-		ret = -EINVAL;
-		goto exit_put_clk_ref;
+		return -EINVAL;
 	}
 
 	reg |= RTC_ENABLE_BIT;
 	writew(reg, (pdata->ioaddr + RTC_RTCCTL));
 	if (((readw(pdata->ioaddr + RTC_RTCCTL)) & RTC_ENABLE_BIT) == 0) {
 		dev_err(&pdev->dev, "hardware module can't be enabled!\n");
-		ret = -EIO;
-		goto exit_put_clk_ref;
+		return -EIO;
 	}
 
 	platform_set_drvdata(pdev, pdata);
@@ -417,29 +429,10 @@ static int mxc_rtc_probe(struct platform_device *pdev)
 	}
 
 	ret = rtc_register_device(rtc);
-	if (ret)
-		goto exit_put_clk_ref;
-
-	return 0;
-
-exit_put_clk_ref:
-	clk_disable_unprepare(pdata->clk_ref);
-exit_put_clk_ipg:
-	clk_disable_unprepare(pdata->clk_ipg);
 
 	return ret;
 }
 
-static int mxc_rtc_remove(struct platform_device *pdev)
-{
-	struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
-
-	clk_disable_unprepare(pdata->clk_ref);
-	clk_disable_unprepare(pdata->clk_ipg);
-
-	return 0;
-}
-
 static struct platform_driver mxc_rtc_driver = {
 	.driver = {
 		   .name	= "mxc_rtc",
@@ -447,7 +440,6 @@ static struct platform_driver mxc_rtc_driver = {
 	},
 	.id_table = imx_rtc_devtype,
 	.probe = mxc_rtc_probe,
-	.remove = mxc_rtc_remove,
 };
 
 module_platform_driver(mxc_rtc_driver)
diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c
index d4ed20f..c20fc79 100644
--- a/drivers/rtc/rtc-omap.c
+++ b/drivers/rtc/rtc-omap.c
@@ -9,7 +9,6 @@
  * Copyright (C) 2014 Johan Hovold <johan@kernel.org>
  */
 
-#include <dt-bindings/gpio/gpio.h>
 #include <linux/bcd.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
diff --git a/drivers/rtc/rtc-pcf85063.c b/drivers/rtc/rtc-pcf85063.c
index 1db17ba..7a87f46 100644
--- a/drivers/rtc/rtc-pcf85063.c
+++ b/drivers/rtc/rtc-pcf85063.c
@@ -9,6 +9,7 @@
  * Copyright (C) 2019 Micro Crystal AG
  * Author: Alexandre Belloni <alexandre.belloni@bootlin.com>
  */
+#include <linux/clk-provider.h>
 #include <linux/i2c.h>
 #include <linux/bcd.h>
 #include <linux/rtc.h>
@@ -44,6 +45,10 @@
 #define PCF85063_OFFSET_STEP0		4340
 #define PCF85063_OFFSET_STEP1		4069
 
+#define PCF85063_REG_CLKO_F_MASK	0x07 /* frequency mask */
+#define PCF85063_REG_CLKO_F_32768HZ	0x00
+#define PCF85063_REG_CLKO_F_OFF		0x07
+
 #define PCF85063_REG_RAM		0x03
 
 #define PCF85063_REG_SC			0x04 /* datetime */
@@ -61,6 +66,9 @@ struct pcf85063_config {
 struct pcf85063 {
 	struct rtc_device	*rtc;
 	struct regmap		*regmap;
+#ifdef CONFIG_COMMON_CLK
+	struct clk_hw		clkout_hw;
+#endif
 };
 
 static int pcf85063_rtc_read_time(struct device *dev, struct rtc_time *tm)
@@ -357,6 +365,150 @@ static int pcf85063_load_capacitance(struct pcf85063 *pcf85063,
 				  PCF85063_REG_CTRL1_CAP_SEL, reg);
 }
 
+#ifdef CONFIG_COMMON_CLK
+/*
+ * Handling of the clkout
+ */
+
+#define clkout_hw_to_pcf85063(_hw) container_of(_hw, struct pcf85063, clkout_hw)
+
+static int clkout_rates[] = {
+	32768,
+	16384,
+	8192,
+	4096,
+	2048,
+	1024,
+	1,
+	0
+};
+
+static unsigned long pcf85063_clkout_recalc_rate(struct clk_hw *hw,
+						 unsigned long parent_rate)
+{
+	struct pcf85063 *pcf85063 = clkout_hw_to_pcf85063(hw);
+	unsigned int buf;
+	int ret = regmap_read(pcf85063->regmap, PCF85063_REG_CTRL2, &buf);
+
+	if (ret < 0)
+		return 0;
+
+	buf &= PCF85063_REG_CLKO_F_MASK;
+	return clkout_rates[buf];
+}
+
+static long pcf85063_clkout_round_rate(struct clk_hw *hw, unsigned long rate,
+				       unsigned long *prate)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(clkout_rates); i++)
+		if (clkout_rates[i] <= rate)
+			return clkout_rates[i];
+
+	return 0;
+}
+
+static int pcf85063_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
+				    unsigned long parent_rate)
+{
+	struct pcf85063 *pcf85063 = clkout_hw_to_pcf85063(hw);
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(clkout_rates); i++)
+		if (clkout_rates[i] == rate)
+			return regmap_update_bits(pcf85063->regmap,
+				PCF85063_REG_CTRL2,
+				PCF85063_REG_CLKO_F_MASK, i);
+
+	return -EINVAL;
+}
+
+static int pcf85063_clkout_control(struct clk_hw *hw, bool enable)
+{
+	struct pcf85063 *pcf85063 = clkout_hw_to_pcf85063(hw);
+	unsigned int buf;
+	int ret;
+
+	ret = regmap_read(pcf85063->regmap, PCF85063_REG_OFFSET, &buf);
+	if (ret < 0)
+		return ret;
+	buf &= PCF85063_REG_CLKO_F_MASK;
+
+	if (enable) {
+		if (buf == PCF85063_REG_CLKO_F_OFF)
+			buf = PCF85063_REG_CLKO_F_32768HZ;
+		else
+			return 0;
+	} else {
+		if (buf != PCF85063_REG_CLKO_F_OFF)
+			buf = PCF85063_REG_CLKO_F_OFF;
+		else
+			return 0;
+	}
+
+	return regmap_update_bits(pcf85063->regmap, PCF85063_REG_CTRL2,
+					PCF85063_REG_CLKO_F_MASK, buf);
+}
+
+static int pcf85063_clkout_prepare(struct clk_hw *hw)
+{
+	return pcf85063_clkout_control(hw, 1);
+}
+
+static void pcf85063_clkout_unprepare(struct clk_hw *hw)
+{
+	pcf85063_clkout_control(hw, 0);
+}
+
+static int pcf85063_clkout_is_prepared(struct clk_hw *hw)
+{
+	struct pcf85063 *pcf85063 = clkout_hw_to_pcf85063(hw);
+	unsigned int buf;
+	int ret = regmap_read(pcf85063->regmap, PCF85063_REG_CTRL2, &buf);
+
+	if (ret < 0)
+		return 0;
+
+	return (buf & PCF85063_REG_CLKO_F_MASK) != PCF85063_REG_CLKO_F_OFF;
+}
+
+static const struct clk_ops pcf85063_clkout_ops = {
+	.prepare = pcf85063_clkout_prepare,
+	.unprepare = pcf85063_clkout_unprepare,
+	.is_prepared = pcf85063_clkout_is_prepared,
+	.recalc_rate = pcf85063_clkout_recalc_rate,
+	.round_rate = pcf85063_clkout_round_rate,
+	.set_rate = pcf85063_clkout_set_rate,
+};
+
+static struct clk *pcf85063_clkout_register_clk(struct pcf85063 *pcf85063)
+{
+	struct clk *clk;
+	struct clk_init_data init;
+
+	init.name = "pcf85063-clkout";
+	init.ops = &pcf85063_clkout_ops;
+	init.flags = 0;
+	init.parent_names = NULL;
+	init.num_parents = 0;
+	pcf85063->clkout_hw.init = &init;
+
+	/* optional override of the clockname */
+	of_property_read_string(pcf85063->rtc->dev.of_node,
+				"clock-output-names", &init.name);
+
+	/* register the clock */
+	clk = devm_clk_register(&pcf85063->rtc->dev, &pcf85063->clkout_hw);
+
+	if (!IS_ERR(clk))
+		of_clk_add_provider(pcf85063->rtc->dev.of_node,
+				    of_clk_src_simple_get, clk);
+
+	return clk;
+}
+#endif
+
 static const struct pcf85063_config pcf85063a_config = {
 	.regmap = {
 		.reg_bits = 8,
@@ -457,6 +609,11 @@ static int pcf85063_probe(struct i2c_client *client)
 	nvmem_cfg.priv = pcf85063->regmap;
 	rtc_nvmem_register(pcf85063->rtc, &nvmem_cfg);
 
+#ifdef CONFIG_COMMON_CLK
+	/* register clk in common clk framework */
+	pcf85063_clkout_register_clk(pcf85063);
+#endif
+
 	return rtc_register_device(pcf85063->rtc);
 }
 
diff --git a/drivers/rtc/rtc-pl030.c b/drivers/rtc/rtc-pl030.c
index d4a5f8a..ebe03eb 100644
--- a/drivers/rtc/rtc-pl030.c
+++ b/drivers/rtc/rtc-pl030.c
@@ -36,32 +36,24 @@ static int pl030_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 {
 	struct pl030_rtc *rtc = dev_get_drvdata(dev);
 
-	rtc_time_to_tm(readl(rtc->base + RTC_MR), &alrm->time);
+	rtc_time64_to_tm(readl(rtc->base + RTC_MR), &alrm->time);
 	return 0;
 }
 
 static int pl030_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 {
 	struct pl030_rtc *rtc = dev_get_drvdata(dev);
-	unsigned long time;
-	int ret;
 
-	/*
-	 * At the moment, we can only deal with non-wildcarded alarm times.
-	 */
-	ret = rtc_valid_tm(&alrm->time);
-	if (ret == 0)
-		ret = rtc_tm_to_time(&alrm->time, &time);
-	if (ret == 0)
-		writel(time, rtc->base + RTC_MR);
-	return ret;
+	writel(rtc_tm_to_time64(&alrm->time), rtc->base + RTC_MR);
+
+	return 0;
 }
 
 static int pl030_read_time(struct device *dev, struct rtc_time *tm)
 {
 	struct pl030_rtc *rtc = dev_get_drvdata(dev);
 
-	rtc_time_to_tm(readl(rtc->base + RTC_DR), tm);
+	rtc_time64_to_tm(readl(rtc->base + RTC_DR), tm);
 
 	return 0;
 }
@@ -77,14 +69,10 @@ static int pl030_read_time(struct device *dev, struct rtc_time *tm)
 static int pl030_set_time(struct device *dev, struct rtc_time *tm)
 {
 	struct pl030_rtc *rtc = dev_get_drvdata(dev);
-	unsigned long time;
-	int ret;
 
-	ret = rtc_tm_to_time(tm, &time);
-	if (ret == 0)
-		writel(time + 1, rtc->base + RTC_LR);
+	writel(rtc_tm_to_time64(tm) + 1, rtc->base + RTC_LR);
 
-	return ret;
+	return 0;
 }
 
 static const struct rtc_class_ops pl030_ops = {
@@ -116,6 +104,7 @@ static int pl030_probe(struct amba_device *dev, const struct amba_id *id)
 	}
 
 	rtc->rtc->ops = &pl030_ops;
+	rtc->rtc->range_max = U32_MAX;
 	rtc->base = ioremap(dev->res.start, resource_size(&dev->res));
 	if (!rtc->base) {
 		ret = -ENOMEM;
diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c
index 180caeb..40d7450 100644
--- a/drivers/rtc/rtc-pl031.c
+++ b/drivers/rtc/rtc-pl031.c
@@ -80,6 +80,8 @@ struct pl031_vendor_data {
 	bool clockwatch;
 	bool st_weekday;
 	unsigned long irqflags;
+	time64_t range_min;
+	timeu64_t range_max;
 };
 
 struct pl031_local {
@@ -123,11 +125,9 @@ static int pl031_stv2_tm_to_time(struct device *dev,
 		return -EINVAL;
 	} else if (wday == -1) {
 		/* wday is not provided, calculate it here */
-		unsigned long time;
 		struct rtc_time calc_tm;
 
-		rtc_tm_to_time(tm, &time);
-		rtc_time_to_tm(time, &calc_tm);
+		rtc_time64_to_tm(rtc_tm_to_time64(tm), &calc_tm);
 		wday = calc_tm.tm_wday;
 	}
 
@@ -210,17 +210,13 @@ static int pl031_stv2_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 	unsigned long bcd_year;
 	int ret;
 
-	/* At the moment, we can only deal with non-wildcarded alarm times. */
-	ret = rtc_valid_tm(&alarm->time);
+	ret = pl031_stv2_tm_to_time(dev, &alarm->time,
+				    &time, &bcd_year);
 	if (ret == 0) {
-		ret = pl031_stv2_tm_to_time(dev, &alarm->time,
-					    &time, &bcd_year);
-		if (ret == 0) {
-			writel(bcd_year, ldata->base + RTC_YMR);
-			writel(time, ldata->base + RTC_MR);
+		writel(bcd_year, ldata->base + RTC_YMR);
+		writel(time, ldata->base + RTC_MR);
 
-			pl031_alarm_irq_enable(dev, alarm->enabled);
-		}
+		pl031_alarm_irq_enable(dev, alarm->enabled);
 	}
 
 	return ret;
@@ -248,30 +244,25 @@ static int pl031_read_time(struct device *dev, struct rtc_time *tm)
 {
 	struct pl031_local *ldata = dev_get_drvdata(dev);
 
-	rtc_time_to_tm(readl(ldata->base + RTC_DR), tm);
+	rtc_time64_to_tm(readl(ldata->base + RTC_DR), tm);
 
 	return 0;
 }
 
 static int pl031_set_time(struct device *dev, struct rtc_time *tm)
 {
-	unsigned long time;
 	struct pl031_local *ldata = dev_get_drvdata(dev);
-	int ret;
 
-	ret = rtc_tm_to_time(tm, &time);
+	writel(rtc_tm_to_time64(tm), ldata->base + RTC_LR);
 
-	if (ret == 0)
-		writel(time, ldata->base + RTC_LR);
-
-	return ret;
+	return 0;
 }
 
 static int pl031_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 {
 	struct pl031_local *ldata = dev_get_drvdata(dev);
 
-	rtc_time_to_tm(readl(ldata->base + RTC_MR), &alarm->time);
+	rtc_time64_to_tm(readl(ldata->base + RTC_MR), &alarm->time);
 
 	alarm->pending = readl(ldata->base + RTC_RIS) & RTC_BIT_AI;
 	alarm->enabled = readl(ldata->base + RTC_IMSC) & RTC_BIT_AI;
@@ -282,20 +273,10 @@ static int pl031_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 static int pl031_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 {
 	struct pl031_local *ldata = dev_get_drvdata(dev);
-	unsigned long time;
-	int ret;
 
-	/* At the moment, we can only deal with non-wildcarded alarm times. */
-	ret = rtc_valid_tm(&alarm->time);
-	if (ret == 0) {
-		ret = rtc_tm_to_time(&alarm->time, &time);
-		if (ret == 0) {
-			writel(time, ldata->base + RTC_MR);
-			pl031_alarm_irq_enable(dev, alarm->enabled);
-		}
-	}
+	writel(rtc_tm_to_time64(&alarm->time), ldata->base + RTC_MR);
 
-	return ret;
+	return 0;
 }
 
 static int pl031_remove(struct amba_device *adev)
@@ -383,6 +364,8 @@ static int pl031_probe(struct amba_device *adev, const struct amba_id *id)
 		return PTR_ERR(ldata->rtc);
 
 	ldata->rtc->ops = ops;
+	ldata->rtc->range_min = vendor->range_min;
+	ldata->rtc->range_max = vendor->range_max;
 
 	ret = rtc_register_device(ldata->rtc);
 	if (ret)
@@ -413,6 +396,7 @@ static struct pl031_vendor_data arm_pl031 = {
 		.set_alarm = pl031_set_alarm,
 		.alarm_irq_enable = pl031_alarm_irq_enable,
 	},
+	.range_max = U32_MAX,
 };
 
 /* The First ST derivative */
@@ -426,6 +410,7 @@ static struct pl031_vendor_data stv1_pl031 = {
 	},
 	.clockwatch = true,
 	.st_weekday = true,
+	.range_max = U32_MAX,
 };
 
 /* And the second ST derivative */
@@ -446,6 +431,8 @@ static struct pl031_vendor_data stv2_pl031 = {
 	 * remove IRQF_COND_SUSPEND
 	 */
 	.irqflags = IRQF_SHARED | IRQF_COND_SUSPEND,
+	.range_min = RTC_TIMESTAMP_BEGIN_0000,
+	.range_max = RTC_TIMESTAMP_END_9999,
 };
 
 static const struct amba_id pl031_ids[] = {
diff --git a/drivers/rtc/rtc-pm8xxx.c b/drivers/rtc/rtc-pm8xxx.c
index 07ea1be..b45ee2c 100644
--- a/drivers/rtc/rtc-pm8xxx.c
+++ b/drivers/rtc/rtc-pm8xxx.c
@@ -84,7 +84,7 @@ static int pm8xxx_rtc_set_time(struct device *dev, struct rtc_time *tm)
 	if (!rtc_dd->allow_set_time)
 		return -EACCES;
 
-	rtc_tm_to_time(tm, &secs);
+	secs = rtc_tm_to_time64(tm);
 
 	dev_dbg(dev, "Seconds value to be written to RTC = %lu\n", secs);
 
@@ -208,7 +208,7 @@ static int pm8xxx_rtc_read_time(struct device *dev, struct rtc_time *tm)
 	secs = value[0] | (value[1] << 8) | (value[2] << 16) |
 	       ((unsigned long)value[3] << 24);
 
-	rtc_time_to_tm(secs, tm);
+	rtc_time64_to_tm(secs, tm);
 
 	dev_dbg(dev, "secs = %lu, h:m:s == %ptRt, y-m-d = %ptRdr\n", secs, tm, tm);
 
@@ -224,7 +224,7 @@ static int pm8xxx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 	struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
 	const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
 
-	rtc_tm_to_time(&alarm->time, &secs);
+	secs = rtc_tm_to_time64(&alarm->time);
 
 	for (i = 0; i < NUM_8_BIT_RTC_REGS; i++) {
 		value[i] = secs & 0xFF;
@@ -280,13 +280,7 @@ static int pm8xxx_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 	secs = value[0] | (value[1] << 8) | (value[2] << 16) |
 	       ((unsigned long)value[3] << 24);
 
-	rtc_time_to_tm(secs, &alarm->time);
-
-	rc = rtc_valid_tm(&alarm->time);
-	if (rc < 0) {
-		dev_err(dev, "Invalid alarm time read from RTC\n");
-		return rc;
-	}
+	rtc_time64_to_tm(secs, &alarm->time);
 
 	dev_dbg(dev, "Alarm set for - h:m:s=%ptRt, y-m-d=%ptRdr\n",
 		&alarm->time, &alarm->time);
@@ -301,6 +295,7 @@ static int pm8xxx_rtc_alarm_irq_enable(struct device *dev, unsigned int enable)
 	struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
 	const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
 	unsigned int ctrl_reg;
+	u8 value[NUM_8_BIT_RTC_REGS] = {0};
 
 	spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
 
@@ -319,6 +314,16 @@ static int pm8xxx_rtc_alarm_irq_enable(struct device *dev, unsigned int enable)
 		goto rtc_rw_fail;
 	}
 
+	/* Clear Alarm register */
+	if (!enable) {
+		rc = regmap_bulk_write(rtc_dd->regmap, regs->alarm_rw, value,
+				       sizeof(value));
+		if (rc) {
+			dev_err(dev, "Clear RTC ALARM register failed\n");
+			goto rtc_rw_fail;
+		}
+	}
+
 rtc_rw_fail:
 	spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
 	return rc;
@@ -486,13 +491,12 @@ static int pm8xxx_rtc_probe(struct platform_device *pdev)
 	device_init_wakeup(&pdev->dev, 1);
 
 	/* Register the RTC device */
-	rtc_dd->rtc = devm_rtc_device_register(&pdev->dev, "pm8xxx_rtc",
-					       &pm8xxx_rtc_ops, THIS_MODULE);
-	if (IS_ERR(rtc_dd->rtc)) {
-		dev_err(&pdev->dev, "%s: RTC registration failed (%ld)\n",
-			__func__, PTR_ERR(rtc_dd->rtc));
+	rtc_dd->rtc = devm_rtc_allocate_device(&pdev->dev);
+	if (IS_ERR(rtc_dd->rtc))
 		return PTR_ERR(rtc_dd->rtc);
-	}
+
+	rtc_dd->rtc->ops = &pm8xxx_rtc_ops;
+	rtc_dd->rtc->range_max = U32_MAX;
 
 	/* Request the alarm IRQ */
 	rc = devm_request_any_context_irq(&pdev->dev, rtc_dd->rtc_alarm_irq,
@@ -504,9 +508,7 @@ static int pm8xxx_rtc_probe(struct platform_device *pdev)
 		return rc;
 	}
 
-	dev_dbg(&pdev->dev, "Probe success !!\n");
-
-	return 0;
+	return rtc_register_device(rtc_dd->rtc);
 }
 
 #ifdef CONFIG_PM_SLEEP
diff --git a/drivers/rtc/rtc-puv3.c b/drivers/rtc/rtc-puv3.c
index 89ff71316..954b88d 100644
--- a/drivers/rtc/rtc-puv3.c
+++ b/drivers/rtc/rtc-puv3.c
@@ -85,7 +85,7 @@ static int puv3_rtc_setpie(struct device *dev, int enabled)
 /* Time read/write */
 static int puv3_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm)
 {
-	rtc_time_to_tm(readl(RTC_RCNR), rtc_tm);
+	rtc_time64_to_tm(readl(RTC_RCNR), rtc_tm);
 
 	dev_dbg(dev, "read time %ptRr\n", rtc_tm);
 
@@ -94,12 +94,9 @@ static int puv3_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm)
 
 static int puv3_rtc_settime(struct device *dev, struct rtc_time *tm)
 {
-	unsigned long rtc_count = 0;
-
 	dev_dbg(dev, "set time %ptRr\n", tm);
 
-	rtc_tm_to_time(tm, &rtc_count);
-	writel(rtc_count, RTC_RCNR);
+	writel(rtc_tm_to_time64(tm), RTC_RCNR);
 
 	return 0;
 }
@@ -108,7 +105,7 @@ static int puv3_rtc_getalarm(struct device *dev, struct rtc_wkalrm *alrm)
 {
 	struct rtc_time *alm_tm = &alrm->time;
 
-	rtc_time_to_tm(readl(RTC_RTAR), alm_tm);
+	rtc_time64_to_tm(readl(RTC_RTAR), alm_tm);
 
 	alrm->enabled = readl(RTC_RTSR) & RTC_RTSR_ALE;
 
@@ -120,12 +117,10 @@ static int puv3_rtc_getalarm(struct device *dev, struct rtc_wkalrm *alrm)
 static int puv3_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
 {
 	struct rtc_time *tm = &alrm->time;
-	unsigned long rtcalarm_count = 0;
 
 	dev_dbg(dev, "set alarm: %d, %ptRr\n", alrm->enabled, tm);
 
-	rtc_tm_to_time(tm, &rtcalarm_count);
-	writel(rtcalarm_count, RTC_RTAR);
+	writel(rtc_tm_to_time64(tm), RTC_RTAR);
 
 	puv3_rtc_setaie(dev, alrm->enabled);
 
@@ -234,6 +229,7 @@ static int puv3_rtc_probe(struct platform_device *pdev)
 
 	/* register RTC and exit */
 	rtc->ops = &puv3_rtcops;
+	rtc->range_max = U32_MAX;
 	ret = rtc_register_device(rtc);
 	if (ret)
 		goto err_nortc;
diff --git a/drivers/rtc/rtc-rc5t619.c b/drivers/rtc/rtc-rc5t619.c
new file mode 100644
index 0000000..24e386e
--- /dev/null
+++ b/drivers/rtc/rtc-rc5t619.c
@@ -0,0 +1,444 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * drivers/rtc/rtc-rc5t619.c
+ *
+ * Real time clock driver for RICOH RC5T619 power management chip.
+ *
+ * Copyright (C) 2019 Andreas Kemnade
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mfd/rn5t618.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/bcd.h>
+#include <linux/rtc.h>
+#include <linux/slab.h>
+#include <linux/irqdomain.h>
+
+struct rc5t619_rtc {
+	int			irq;
+	struct rtc_device	*rtc;
+	struct rn5t618 *rn5t618;
+};
+
+#define CTRL1_ALARM_ENABLED 0x40
+#define CTRL1_24HR 0x20
+#define CTRL1_PERIODIC_MASK 0xf
+
+#define CTRL2_PON 0x10
+#define CTRL2_ALARM_STATUS 0x80
+#define CTRL2_CTFG 0x4
+#define CTRL2_CTC 0x1
+
+#define MONTH_CENTFLAG 0x80
+#define HOUR_PMFLAG 0x20
+#define MDAY_DAL_EXT 0x80
+
+static uint8_t rtc5t619_12hour_bcd2bin(uint8_t hour)
+{
+	if (hour & HOUR_PMFLAG) {
+		hour = bcd2bin(hour & ~HOUR_PMFLAG);
+		return hour == 12 ? 12 : 12 + hour;
+	}
+
+	hour = bcd2bin(hour);
+	return hour == 12 ? 0 : hour;
+}
+
+static uint8_t rtc5t619_12hour_bin2bcd(uint8_t hour)
+{
+	if (!hour)
+		return 0x12;
+
+	if (hour < 12)
+		return bin2bcd(hour);
+
+	if (hour == 12)
+		return 0x12 | HOUR_PMFLAG;
+
+	return bin2bcd(hour - 12) | HOUR_PMFLAG;
+}
+
+static int rc5t619_rtc_periodic_disable(struct device *dev)
+{
+	struct rc5t619_rtc *rtc = dev_get_drvdata(dev);
+	int err;
+
+	/* disable function */
+	err = regmap_update_bits(rtc->rn5t618->regmap,
+				 RN5T618_RTC_CTRL1, CTRL1_PERIODIC_MASK, 0);
+	if (err < 0)
+		return err;
+
+	/* clear alarm flag and CTFG */
+	err = regmap_update_bits(rtc->rn5t618->regmap, RN5T618_RTC_CTRL2,
+				 CTRL2_ALARM_STATUS | CTRL2_CTFG | CTRL2_CTC,
+				 0);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+/* things to be done once after power on */
+static int rc5t619_rtc_pon_setup(struct device *dev)
+{
+	struct rc5t619_rtc *rtc = dev_get_drvdata(dev);
+	int err;
+	unsigned int reg_data;
+
+	err = regmap_read(rtc->rn5t618->regmap, RN5T618_RTC_CTRL2, &reg_data);
+	if (err < 0)
+		return err;
+
+	/* clear VDET PON */
+	reg_data &= ~(CTRL2_PON | CTRL2_CTC | 0x4a);	/* 0101-1011 */
+	reg_data |= 0x20;	/* 0010-0000 */
+	err = regmap_write(rtc->rn5t618->regmap, RN5T618_RTC_CTRL2, reg_data);
+	if (err < 0)
+		return err;
+
+	/* clearing RTC Adjust register */
+	err = regmap_write(rtc->rn5t618->regmap, RN5T618_RTC_ADJUST, 0);
+	if (err)
+		return err;
+
+	return regmap_update_bits(rtc->rn5t618->regmap,
+					RN5T618_RTC_CTRL1,
+					CTRL1_24HR, CTRL1_24HR);
+}
+
+static int rc5t619_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct rc5t619_rtc *rtc = dev_get_drvdata(dev);
+	u8 buff[7];
+	int err;
+	int cent_flag;
+	unsigned int ctrl1;
+	unsigned int ctrl2;
+
+	err = regmap_read(rtc->rn5t618->regmap, RN5T618_RTC_CTRL2, &ctrl2);
+	if (err < 0)
+		return err;
+
+	if (ctrl2 & CTRL2_PON)
+		return -EINVAL;
+
+	err = regmap_read(rtc->rn5t618->regmap, RN5T618_RTC_CTRL1, &ctrl1);
+	if (err < 0)
+		return err;
+
+	err = regmap_bulk_read(rtc->rn5t618->regmap, RN5T618_RTC_SECONDS,
+			       buff, sizeof(buff));
+	if (err < 0)
+		return err;
+
+	if (buff[5] & MONTH_CENTFLAG)
+		cent_flag = 1;
+	else
+		cent_flag = 0;
+
+	tm->tm_sec  = bcd2bin(buff[0]);
+	tm->tm_min  = bcd2bin(buff[1]);
+
+	if (ctrl1 & CTRL1_24HR)
+		tm->tm_hour = bcd2bin(buff[2]);
+	else
+		tm->tm_hour = rtc5t619_12hour_bcd2bin(buff[2]);
+
+	tm->tm_wday = bcd2bin(buff[3]);
+	tm->tm_mday = bcd2bin(buff[4]);
+	tm->tm_mon  = bcd2bin(buff[5] & 0x1f) - 1; /* back to system 0-11 */
+	tm->tm_year = bcd2bin(buff[6]) + 100 * cent_flag;
+
+	return 0;
+}
+
+static int rc5t619_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct rc5t619_rtc *rtc = dev_get_drvdata(dev);
+	u8 buff[7];
+	int err;
+	int cent_flag;
+	unsigned int ctrl1;
+	unsigned int ctrl2;
+
+	err = regmap_read(rtc->rn5t618->regmap, RN5T618_RTC_CTRL2, &ctrl2);
+	if (err < 0)
+		return err;
+
+	if (ctrl2 & CTRL2_PON)
+		rc5t619_rtc_pon_setup(dev);
+
+	err = regmap_read(rtc->rn5t618->regmap, RN5T618_RTC_CTRL1, &ctrl1);
+	if (err < 0)
+		return err;
+
+	if (tm->tm_year >= 100)
+		cent_flag = 1;
+	else
+		cent_flag = 0;
+
+	buff[0] = bin2bcd(tm->tm_sec);
+	buff[1] = bin2bcd(tm->tm_min);
+
+	if (ctrl1 & CTRL1_24HR)
+		buff[2] = bin2bcd(tm->tm_hour);
+	else
+		buff[2] = rtc5t619_12hour_bin2bcd(tm->tm_hour);
+
+	buff[3] = bin2bcd(tm->tm_wday);
+	buff[4] = bin2bcd(tm->tm_mday);
+	buff[5] = bin2bcd(tm->tm_mon + 1);	/* system set 0-11 */
+	buff[6] = bin2bcd(tm->tm_year - cent_flag * 100);
+
+	if (cent_flag)
+		buff[5] |= MONTH_CENTFLAG;
+
+	err = regmap_bulk_write(rtc->rn5t618->regmap, RN5T618_RTC_SECONDS,
+				buff, sizeof(buff));
+	if (err < 0) {
+		dev_err(dev, "failed to program new time: %d\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+/* 0-disable, 1-enable */
+static int rc5t619_rtc_alarm_enable(struct device *dev, unsigned int enabled)
+{
+	struct rc5t619_rtc *rtc = dev_get_drvdata(dev);
+
+	return regmap_update_bits(rtc->rn5t618->regmap,
+			RN5T618_RTC_CTRL1,
+			CTRL1_ALARM_ENABLED,
+			enabled ? CTRL1_ALARM_ENABLED : 0);
+}
+
+static int rc5t619_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct rc5t619_rtc *rtc = dev_get_drvdata(dev);
+	u8 buff[6];
+	unsigned int buff_cent;
+	int err;
+	int cent_flag;
+	unsigned int ctrl1;
+
+	err = regmap_read(rtc->rn5t618->regmap, RN5T618_RTC_CTRL1, &ctrl1);
+	if (err)
+		return err;
+
+	err = regmap_read(rtc->rn5t618->regmap, RN5T618_RTC_MONTH, &buff_cent);
+	if (err < 0) {
+		dev_err(dev, "failed to read time: %d\n", err);
+		return err;
+	}
+
+	if (buff_cent & MONTH_CENTFLAG)
+		cent_flag = 1;
+	else
+		cent_flag = 0;
+
+	err = regmap_bulk_read(rtc->rn5t618->regmap, RN5T618_RTC_ALARM_Y_SEC,
+			       buff, sizeof(buff));
+	if (err)
+		return err;
+
+	buff[3] = buff[3] & 0x3f;
+
+	alrm->time.tm_sec  = bcd2bin(buff[0]);
+	alrm->time.tm_min  = bcd2bin(buff[1]);
+
+	if (ctrl1 & CTRL1_24HR)
+		alrm->time.tm_hour = bcd2bin(buff[2]);
+	else
+		alrm->time.tm_hour = rtc5t619_12hour_bcd2bin(buff[2]);
+
+	alrm->time.tm_mday = bcd2bin(buff[3]);
+	alrm->time.tm_mon  = bcd2bin(buff[4]) - 1;
+	alrm->time.tm_year = bcd2bin(buff[5]) + 100 * cent_flag;
+	alrm->enabled = !!(ctrl1 & CTRL1_ALARM_ENABLED);
+	dev_dbg(dev, "read alarm: %ptR\n", &alrm->time);
+
+	return 0;
+}
+
+static int rc5t619_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct rc5t619_rtc *rtc = dev_get_drvdata(dev);
+	u8 buff[6];
+	int err;
+	int cent_flag;
+	unsigned int ctrl1;
+
+	err = regmap_read(rtc->rn5t618->regmap, RN5T618_RTC_CTRL1, &ctrl1);
+	if (err)
+		return err;
+
+	err = rc5t619_rtc_alarm_enable(dev, 0);
+	if (err < 0)
+		return err;
+
+	if (rtc->irq == -1)
+		return -EINVAL;
+
+	if (alrm->enabled == 0)
+		return 0;
+
+	if (alrm->time.tm_year >= 100)
+		cent_flag = 1;
+	else
+		cent_flag = 0;
+
+	alrm->time.tm_mon += 1;
+	buff[0] = bin2bcd(alrm->time.tm_sec);
+	buff[1] = bin2bcd(alrm->time.tm_min);
+
+	if (ctrl1 & CTRL1_24HR)
+		buff[2] = bin2bcd(alrm->time.tm_hour);
+	else
+		buff[2] = rtc5t619_12hour_bin2bcd(alrm->time.tm_hour);
+
+	buff[3] = bin2bcd(alrm->time.tm_mday);
+	buff[4] = bin2bcd(alrm->time.tm_mon);
+	buff[5] = bin2bcd(alrm->time.tm_year - 100 * cent_flag);
+	buff[3] |= MDAY_DAL_EXT;
+
+	err = regmap_bulk_write(rtc->rn5t618->regmap, RN5T618_RTC_ALARM_Y_SEC,
+				buff, sizeof(buff));
+	if (err < 0)
+		return err;
+
+	return rc5t619_rtc_alarm_enable(dev, alrm->enabled);
+}
+
+static const struct rtc_class_ops rc5t619_rtc_ops = {
+	.read_time	= rc5t619_rtc_read_time,
+	.set_time	= rc5t619_rtc_set_time,
+	.set_alarm	= rc5t619_rtc_set_alarm,
+	.read_alarm	= rc5t619_rtc_read_alarm,
+	.alarm_irq_enable = rc5t619_rtc_alarm_enable,
+};
+
+static int rc5t619_rtc_alarm_flag_clr(struct device *dev)
+{
+	struct rc5t619_rtc *rtc = dev_get_drvdata(dev);
+
+	/* clear alarm-D status bits.*/
+	return regmap_update_bits(rtc->rn5t618->regmap,
+				RN5T618_RTC_CTRL2,
+				CTRL2_ALARM_STATUS | CTRL2_CTC, 0);
+}
+
+static irqreturn_t rc5t619_rtc_irq(int irq, void *data)
+{
+	struct device *dev = data;
+	struct rc5t619_rtc *rtc = dev_get_drvdata(dev);
+
+	rc5t619_rtc_alarm_flag_clr(dev);
+
+	rtc_update_irq(rtc->rtc, 1, RTC_IRQF | RTC_AF);
+	return IRQ_HANDLED;
+}
+
+static int rc5t619_rtc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct rn5t618 *rn5t618 = dev_get_drvdata(pdev->dev.parent);
+	struct rc5t619_rtc *rtc;
+	unsigned int ctrl2;
+	int err;
+
+	rtc = devm_kzalloc(dev, sizeof(*rtc), GFP_KERNEL);
+	if (IS_ERR(rtc)) {
+		err = PTR_ERR(rtc);
+		return -ENOMEM;
+	}
+
+	rtc->rn5t618 = rn5t618;
+
+	dev_set_drvdata(dev, rtc);
+	rtc->irq = -1;
+
+	if (rn5t618->irq_data)
+		rtc->irq = regmap_irq_get_virq(rn5t618->irq_data,
+					       RN5T618_IRQ_RTC);
+
+	if (rtc->irq  < 0)
+		rtc->irq = -1;
+
+	err = regmap_read(rtc->rn5t618->regmap, RN5T618_RTC_CTRL2, &ctrl2);
+	if (err < 0)
+		return err;
+
+	/* disable rtc periodic function */
+	err = rc5t619_rtc_periodic_disable(&pdev->dev);
+	if (err)
+		return err;
+
+	if (ctrl2 & CTRL2_PON) {
+		err = rc5t619_rtc_alarm_flag_clr(&pdev->dev);
+		if (err)
+			return err;
+	}
+
+	rtc->rtc = devm_rtc_allocate_device(&pdev->dev);
+	if (IS_ERR(rtc->rtc)) {
+		err = PTR_ERR(rtc->rtc);
+		dev_err(dev, "RTC device register: err %d\n", err);
+		return err;
+	}
+
+	rtc->rtc->ops = &rc5t619_rtc_ops;
+	rtc->rtc->range_min = RTC_TIMESTAMP_BEGIN_1900;
+	rtc->rtc->range_max = RTC_TIMESTAMP_END_2099;
+
+	/* set interrupt and enable it */
+	if (rtc->irq != -1) {
+		err = devm_request_threaded_irq(&pdev->dev, rtc->irq, NULL,
+						rc5t619_rtc_irq,
+						IRQF_ONESHOT,
+						"rtc-rc5t619",
+						&pdev->dev);
+		if (err < 0) {
+			dev_err(&pdev->dev, "request IRQ:%d fail\n", rtc->irq);
+			rtc->irq = -1;
+
+			err = rc5t619_rtc_alarm_enable(&pdev->dev, 0);
+			if (err)
+				return err;
+
+		} else {
+			/* enable wake */
+			device_init_wakeup(&pdev->dev, 1);
+			enable_irq_wake(rtc->irq);
+		}
+	} else {
+		/* system don't want to using alarm interrupt, so close it */
+		err = rc5t619_rtc_alarm_enable(&pdev->dev, 0);
+		if (err)
+			return err;
+
+		dev_warn(&pdev->dev, "rc5t619 interrupt is disabled\n");
+	}
+
+	return rtc_register_device(rtc->rtc);
+}
+
+static struct platform_driver rc5t619_rtc_driver = {
+	.driver	= {
+		.name	= "rc5t619-rtc",
+	},
+	.probe	= rc5t619_rtc_probe,
+};
+
+module_platform_driver(rc5t619_rtc_driver);
+MODULE_ALIAS("platform:rc5t619-rtc");
+MODULE_DESCRIPTION("RICOH RC5T619 RTC driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
index d37893f..9ccc97c 100644
--- a/drivers/rtc/rtc-sa1100.c
+++ b/drivers/rtc/rtc-sa1100.c
@@ -111,20 +111,17 @@ static int sa1100_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
 	struct sa1100_rtc *info = dev_get_drvdata(dev);
 
-	rtc_time_to_tm(readl_relaxed(info->rcnr), tm);
+	rtc_time64_to_tm(readl_relaxed(info->rcnr), tm);
 	return 0;
 }
 
 static int sa1100_rtc_set_time(struct device *dev, struct rtc_time *tm)
 {
 	struct sa1100_rtc *info = dev_get_drvdata(dev);
-	unsigned long time;
-	int ret;
 
-	ret = rtc_tm_to_time(tm, &time);
-	if (ret == 0)
-		writel_relaxed(time, info->rcnr);
-	return ret;
+	writel_relaxed(rtc_tm_to_time64(tm), info->rcnr);
+
+	return 0;
 }
 
 static int sa1100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
@@ -141,24 +138,18 @@ static int sa1100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 static int sa1100_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 {
 	struct sa1100_rtc *info = dev_get_drvdata(dev);
-	unsigned long time;
-	int ret;
 
 	spin_lock_irq(&info->lock);
-	ret = rtc_tm_to_time(&alrm->time, &time);
-	if (ret != 0)
-		goto out;
 	writel_relaxed(readl_relaxed(info->rtsr) &
 		(RTSR_HZE | RTSR_ALE | RTSR_AL), info->rtsr);
-	writel_relaxed(time, info->rtar);
+	writel_relaxed(rtc_tm_to_time64(&alrm->time), info->rtar);
 	if (alrm->enabled)
 		writel_relaxed(readl_relaxed(info->rtsr) | RTSR_ALE, info->rtsr);
 	else
 		writel_relaxed(readl_relaxed(info->rtsr) & ~RTSR_ALE, info->rtsr);
-out:
 	spin_unlock_irq(&info->lock);
 
-	return ret;
+	return 0;
 }
 
 static int sa1100_rtc_proc(struct device *dev, struct seq_file *seq)
@@ -182,7 +173,6 @@ static const struct rtc_class_ops sa1100_rtc_ops = {
 
 int sa1100_rtc_init(struct platform_device *pdev, struct sa1100_rtc *info)
 {
-	struct rtc_device *rtc;
 	int ret;
 
 	spin_lock_init(&info->lock);
@@ -211,15 +201,15 @@ int sa1100_rtc_init(struct platform_device *pdev, struct sa1100_rtc *info)
 		writel_relaxed(0, info->rcnr);
 	}
 
-	rtc = devm_rtc_device_register(&pdev->dev, pdev->name, &sa1100_rtc_ops,
-					THIS_MODULE);
-	if (IS_ERR(rtc)) {
-		clk_disable_unprepare(info->clk);
-		return PTR_ERR(rtc);
-	}
-	info->rtc = rtc;
+	info->rtc->ops = &sa1100_rtc_ops;
+	info->rtc->max_user_freq = RTC_FREQ;
+	info->rtc->range_max = U32_MAX;
 
-	rtc->max_user_freq = RTC_FREQ;
+	ret = rtc_register_device(info->rtc);
+	if (ret) {
+		clk_disable_unprepare(info->clk);
+		return ret;
+	}
 
 	/* Fix for a nasty initialization problem the in SA11xx RTSR register.
 	 * See also the comments in sa1100_rtc_interrupt().
@@ -267,6 +257,10 @@ static int sa1100_rtc_probe(struct platform_device *pdev)
 	info->irq_1hz = irq_1hz;
 	info->irq_alarm = irq_alarm;
 
+	info->rtc = devm_rtc_allocate_device(&pdev->dev);
+	if (IS_ERR(info->rtc))
+		return PTR_ERR(info->rtc);
+
 	ret = devm_request_irq(&pdev->dev, irq_1hz, sa1100_rtc_interrupt, 0,
 			       "rtc 1Hz", &pdev->dev);
 	if (ret) {
diff --git a/drivers/rtc/rtc-sh.c b/drivers/rtc/rtc-sh.c
index feb1f8e..9167b48 100644
--- a/drivers/rtc/rtc-sh.c
+++ b/drivers/rtc/rtc-sh.c
@@ -504,8 +504,7 @@ static int __init sh_rtc_probe(struct platform_device *pdev)
 	if (unlikely(!rtc->res))
 		return -EBUSY;
 
-	rtc->regbase = devm_ioremap(&pdev->dev, rtc->res->start,
-					rtc->regsize);
+	rtc->regbase = devm_ioremap(&pdev->dev, rtc->res->start, rtc->regsize);
 	if (unlikely(!rtc->regbase))
 		return -EINVAL;
 
diff --git a/drivers/rtc/rtc-sirfsoc.c b/drivers/rtc/rtc-sirfsoc.c
index a2c9c55..abf1943 100644
--- a/drivers/rtc/rtc-sirfsoc.c
+++ b/drivers/rtc/rtc-sirfsoc.c
@@ -90,13 +90,13 @@ static int sirfsoc_rtc_read_alarm(struct device *dev,
 	 */
 	/* if alarm is in next overflow cycle */
 	if (rtc_count > rtc_alarm)
-		rtc_time_to_tm((rtcdrv->overflow_rtc + 1)
-				<< (BITS_PER_LONG - RTC_SHIFT)
-				| rtc_alarm >> RTC_SHIFT, &(alrm->time));
+		rtc_time64_to_tm((rtcdrv->overflow_rtc + 1)
+				 << (BITS_PER_LONG - RTC_SHIFT)
+				 | rtc_alarm >> RTC_SHIFT, &alrm->time);
 	else
-		rtc_time_to_tm(rtcdrv->overflow_rtc
-				<< (BITS_PER_LONG - RTC_SHIFT)
-				| rtc_alarm >> RTC_SHIFT, &(alrm->time));
+		rtc_time64_to_tm(rtcdrv->overflow_rtc
+				 << (BITS_PER_LONG - RTC_SHIFT)
+				 | rtc_alarm >> RTC_SHIFT, &alrm->time);
 	if (sirfsoc_rtc_readl(rtcdrv, RTC_STATUS) & SIRFSOC_RTC_AL0E)
 		alrm->enabled = 1;
 
@@ -113,7 +113,7 @@ static int sirfsoc_rtc_set_alarm(struct device *dev,
 	rtcdrv = dev_get_drvdata(dev);
 
 	if (alrm->enabled) {
-		rtc_tm_to_time(&(alrm->time), &rtc_alarm);
+		rtc_alarm = rtc_tm_to_time64(&alrm->time);
 
 		spin_lock_irq(&rtcdrv->lock);
 
@@ -181,8 +181,8 @@ static int sirfsoc_rtc_read_time(struct device *dev,
 		cpu_relax();
 	} while (tmp_rtc != sirfsoc_rtc_readl(rtcdrv, RTC_CN));
 
-	rtc_time_to_tm(rtcdrv->overflow_rtc << (BITS_PER_LONG - RTC_SHIFT) |
-					tmp_rtc >> RTC_SHIFT, tm);
+	rtc_time64_to_tm(rtcdrv->overflow_rtc << (BITS_PER_LONG - RTC_SHIFT)
+			 | tmp_rtc >> RTC_SHIFT, tm);
 	return 0;
 }
 
@@ -193,7 +193,7 @@ static int sirfsoc_rtc_set_time(struct device *dev,
 	struct sirfsoc_rtc_drv *rtcdrv;
 	rtcdrv = dev_get_drvdata(dev);
 
-	rtc_tm_to_time(tm, &rtc_time);
+	rtc_time = rtc_tm_to_time64(tm);
 
 	rtcdrv->overflow_rtc = rtc_time >> (BITS_PER_LONG - RTC_SHIFT);
 
@@ -341,28 +341,22 @@ static int sirfsoc_rtc_probe(struct platform_device *pdev)
 	rtcdrv->overflow_rtc =
 		sirfsoc_rtc_readl(rtcdrv, RTC_SW_VALUE);
 
-	rtcdrv->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
-			&sirfsoc_rtc_ops, THIS_MODULE);
-	if (IS_ERR(rtcdrv->rtc)) {
-		err = PTR_ERR(rtcdrv->rtc);
-		dev_err(&pdev->dev, "can't register RTC device\n");
-		return err;
-	}
+	rtcdrv->rtc = devm_rtc_allocate_device(&pdev->dev);
+	if (IS_ERR(rtcdrv->rtc))
+		return PTR_ERR(rtcdrv->rtc);
+
+	rtcdrv->rtc->ops = &sirfsoc_rtc_ops;
+	rtcdrv->rtc->range_max = (1ULL << 60) - 1;
 
 	rtcdrv->irq = platform_get_irq(pdev, 0);
-	err = devm_request_irq(
-			&pdev->dev,
-			rtcdrv->irq,
-			sirfsoc_rtc_irq_handler,
-			IRQF_SHARED,
-			pdev->name,
-			rtcdrv);
+	err = devm_request_irq(&pdev->dev, rtcdrv->irq, sirfsoc_rtc_irq_handler,
+			       IRQF_SHARED, pdev->name, rtcdrv);
 	if (err) {
 		dev_err(&pdev->dev, "Unable to register for the SiRF SOC RTC IRQ\n");
 		return err;
 	}
 
-	return 0;
+	return rtc_register_device(rtcdrv->rtc);
 }
 
 #ifdef CONFIG_PM_SLEEP
diff --git a/drivers/rtc/rtc-snvs.c b/drivers/rtc/rtc-snvs.c
index 757f4da..35ee08a 100644
--- a/drivers/rtc/rtc-snvs.c
+++ b/drivers/rtc/rtc-snvs.c
@@ -7,7 +7,6 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/pm_wakeirq.h>
 #include <linux/rtc.h>
@@ -264,6 +263,12 @@ static const struct regmap_config snvs_rtc_config = {
 	.reg_stride = 4,
 };
 
+static void snvs_rtc_action(void *data)
+{
+	if (data)
+		clk_disable_unprepare(data);
+}
+
 static int snvs_rtc_probe(struct platform_device *pdev)
 {
 	struct snvs_rtc_data *data;
@@ -314,6 +319,10 @@ static int snvs_rtc_probe(struct platform_device *pdev)
 		}
 	}
 
+	ret = devm_add_action_or_reset(&pdev->dev, snvs_rtc_action, data->clk);
+	if (ret)
+		return ret;
+
 	platform_set_drvdata(pdev, data);
 
 	/* Initialize glitch detect */
@@ -326,7 +335,7 @@ static int snvs_rtc_probe(struct platform_device *pdev)
 	ret = snvs_rtc_enable(data, true);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to enable rtc %d\n", ret);
-		goto error_rtc_device_register;
+		return ret;
 	}
 
 	device_init_wakeup(&pdev->dev, true);
@@ -339,24 +348,13 @@ static int snvs_rtc_probe(struct platform_device *pdev)
 	if (ret) {
 		dev_err(&pdev->dev, "failed to request irq %d: %d\n",
 			data->irq, ret);
-		goto error_rtc_device_register;
+		return ret;
 	}
 
 	data->rtc->ops = &snvs_rtc_ops;
 	data->rtc->range_max = U32_MAX;
-	ret = rtc_register_device(data->rtc);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to register rtc: %d\n", ret);
-		goto error_rtc_device_register;
-	}
 
-	return 0;
-
-error_rtc_device_register:
-	if (data->clk)
-		clk_disable_unprepare(data->clk);
-
-	return ret;
+	return rtc_register_device(data->rtc);
 }
 
 static int __maybe_unused snvs_rtc_suspend_noirq(struct device *dev)
diff --git a/drivers/rtc/rtc-starfire.c b/drivers/rtc/rtc-starfire.c
index a7d4932..37a2627 100644
--- a/drivers/rtc/rtc-starfire.c
+++ b/drivers/rtc/rtc-starfire.c
@@ -27,7 +27,7 @@ static u32 starfire_get_time(void)
 
 static int starfire_read_time(struct device *dev, struct rtc_time *tm)
 {
-	rtc_time_to_tm(starfire_get_time(), tm);
+	rtc_time64_to_tm(starfire_get_time(), tm);
 	return 0;
 }
 
@@ -39,14 +39,16 @@ static int __init starfire_rtc_probe(struct platform_device *pdev)
 {
 	struct rtc_device *rtc;
 
-	rtc = devm_rtc_device_register(&pdev->dev, "starfire",
-				&starfire_rtc_ops, THIS_MODULE);
+	rtc = devm_rtc_allocate_device(&pdev->dev);
 	if (IS_ERR(rtc))
 		return PTR_ERR(rtc);
 
+	rtc->ops = &starfire_rtc_ops;
+	rtc->range_max = U32_MAX;
+
 	platform_set_drvdata(pdev, rtc);
 
-	return 0;
+	return rtc_register_device(rtc);
 }
 
 static struct platform_driver starfire_rtc_driver = {
diff --git a/drivers/rtc/rtc-sun6i.c b/drivers/rtc/rtc-sun6i.c
index 852f5f3..e2b8b15 100644
--- a/drivers/rtc/rtc-sun6i.c
+++ b/drivers/rtc/rtc-sun6i.c
@@ -108,7 +108,6 @@
  * driver, even though it is somewhat limited.
  */
 #define SUN6I_YEAR_MIN				1970
-#define SUN6I_YEAR_MAX				2033
 #define SUN6I_YEAR_OFF				(SUN6I_YEAR_MIN - 1900)
 
 /*
@@ -250,19 +249,17 @@ static void __init sun6i_rtc_clk_init(struct device_node *node,
 		writel(reg, rtc->base + SUN6I_LOSC_CTRL);
 	}
 
-	/* Switch to the external, more precise, oscillator */
-	reg |= SUN6I_LOSC_CTRL_EXT_OSC;
-	if (rtc->data->has_losc_en)
-		reg |= SUN6I_LOSC_CTRL_EXT_LOSC_EN;
+	/* Switch to the external, more precise, oscillator, if present */
+	if (of_get_property(node, "clocks", NULL)) {
+		reg |= SUN6I_LOSC_CTRL_EXT_OSC;
+		if (rtc->data->has_losc_en)
+			reg |= SUN6I_LOSC_CTRL_EXT_LOSC_EN;
+	}
 	writel(reg, rtc->base + SUN6I_LOSC_CTRL);
 
 	/* Yes, I know, this is ugly. */
 	sun6i_rtc = rtc;
 
-	/* Deal with old DTs */
-	if (!of_get_property(node, "clocks", NULL))
-		goto err;
-
 	/* Only read IOSC name from device tree if it is exported */
 	if (rtc->data->export_iosc)
 		of_property_read_string_index(node, "clock-output-names", 2,
@@ -279,11 +276,13 @@ static void __init sun6i_rtc_clk_init(struct device_node *node,
 	}
 
 	parents[0] = clk_hw_get_name(rtc->int_osc);
+	/* If there is no external oscillator, this will be NULL and ... */
 	parents[1] = of_clk_get_parent_name(node, 0);
 
 	rtc->hw.init = &init;
 
 	init.parent_names = parents;
+	/* ... number of clock parents will be 1. */
 	init.num_parents = of_clk_get_parent_count(node) + 1;
 	of_property_read_string_index(node, "clock-output-names", 0,
 				      &init.name);
@@ -499,7 +498,7 @@ static int sun6i_rtc_getalarm(struct device *dev, struct rtc_wkalrm *wkalrm)
 
 	wkalrm->enabled = !!(alrm_en & SUN6I_ALRM_EN_CNT_EN);
 	wkalrm->pending = !!(alrm_st & SUN6I_ALRM_EN_CNT_EN);
-	rtc_time_to_tm(chip->alarm, &wkalrm->time);
+	rtc_time64_to_tm(chip->alarm, &wkalrm->time);
 
 	return 0;
 }
@@ -520,8 +519,8 @@ static int sun6i_rtc_setalarm(struct device *dev, struct rtc_wkalrm *wkalrm)
 		return -EINVAL;
 	}
 
-	rtc_tm_to_time(alrm_tm, &time_set);
-	rtc_tm_to_time(&tm_now, &time_now);
+	time_set = rtc_tm_to_time64(alrm_tm);
+	time_now = rtc_tm_to_time64(&tm_now);
 	if (time_set <= time_now) {
 		dev_err(dev, "Date to set in the past\n");
 		return -EINVAL;
@@ -569,14 +568,6 @@ static int sun6i_rtc_settime(struct device *dev, struct rtc_time *rtc_tm)
 	struct sun6i_rtc_dev *chip = dev_get_drvdata(dev);
 	u32 date = 0;
 	u32 time = 0;
-	int year;
-
-	year = rtc_tm->tm_year + 1900;
-	if (year < SUN6I_YEAR_MIN || year > SUN6I_YEAR_MAX) {
-		dev_err(dev, "rtc only supports year in range %d - %d\n",
-			SUN6I_YEAR_MIN, SUN6I_YEAR_MAX);
-		return -EINVAL;
-	}
 
 	rtc_tm->tm_year -= SUN6I_YEAR_OFF;
 	rtc_tm->tm_mon += 1;
@@ -585,7 +576,7 @@ static int sun6i_rtc_settime(struct device *dev, struct rtc_time *rtc_tm)
 		SUN6I_DATE_SET_MON_VALUE(rtc_tm->tm_mon)  |
 		SUN6I_DATE_SET_YEAR_VALUE(rtc_tm->tm_year);
 
-	if (is_leap_year(year))
+	if (is_leap_year(rtc_tm->tm_year + SUN6I_YEAR_MIN))
 		date |= SUN6I_LEAP_SET_VALUE(1);
 
 	time = SUN6I_TIME_SET_SEC_VALUE(rtc_tm->tm_sec)  |
@@ -726,12 +717,16 @@ static int sun6i_rtc_probe(struct platform_device *pdev)
 
 	device_init_wakeup(&pdev->dev, 1);
 
-	chip->rtc = devm_rtc_device_register(&pdev->dev, "rtc-sun6i",
-					     &sun6i_rtc_ops, THIS_MODULE);
-	if (IS_ERR(chip->rtc)) {
-		dev_err(&pdev->dev, "unable to register device\n");
+	chip->rtc = devm_rtc_allocate_device(&pdev->dev);
+	if (IS_ERR(chip->rtc))
 		return PTR_ERR(chip->rtc);
-	}
+
+	chip->rtc->ops = &sun6i_rtc_ops;
+	chip->rtc->range_max = 2019686399LL; /* 2033-12-31 23:59:59 */
+
+	ret = rtc_register_device(chip->rtc);
+	if (ret)
+		return ret;
 
 	dev_info(&pdev->dev, "RTC enabled\n");
 
diff --git a/drivers/rtc/rtc-zynqmp.c b/drivers/rtc/rtc-zynqmp.c
index 5786866..4b1077e 100644
--- a/drivers/rtc/rtc-zynqmp.c
+++ b/drivers/rtc/rtc-zynqmp.c
@@ -38,6 +38,8 @@
 
 #define RTC_CALIB_DEF		0x198233
 #define RTC_CALIB_MASK		0x1FFFFF
+#define RTC_ALRM_MASK          BIT(1)
+#define RTC_MSEC               1000
 
 struct xlnx_rtc_dev {
 	struct rtc_device	*rtc;
@@ -123,11 +125,28 @@ static int xlnx_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 static int xlnx_rtc_alarm_irq_enable(struct device *dev, u32 enabled)
 {
 	struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
+	unsigned int status;
+	ulong timeout;
 
-	if (enabled)
+	timeout = jiffies + msecs_to_jiffies(RTC_MSEC);
+
+	if (enabled) {
+		while (1) {
+			status = readl(xrtcdev->reg_base + RTC_INT_STS);
+			if (!((status & RTC_ALRM_MASK) == RTC_ALRM_MASK))
+				break;
+
+			if (time_after_eq(jiffies, timeout)) {
+				dev_err(dev, "Time out occur, while clearing alarm status bit\n");
+				return -ETIMEDOUT;
+			}
+			writel(RTC_INT_ALRM, xrtcdev->reg_base + RTC_INT_STS);
+		}
+
 		writel(RTC_INT_ALRM, xrtcdev->reg_base + RTC_INT_EN);
-	else
+	} else {
 		writel(RTC_INT_ALRM, xrtcdev->reg_base + RTC_INT_DIS);
+	}
 
 	return 0;
 }
@@ -183,8 +202,8 @@ static irqreturn_t xlnx_rtc_interrupt(int irq, void *id)
 	if (!(status & (RTC_INT_SEC | RTC_INT_ALRM)))
 		return IRQ_NONE;
 
-	/* Clear RTC_INT_ALRM interrupt only */
-	writel(RTC_INT_ALRM, xrtcdev->reg_base + RTC_INT_STS);
+	/* Disable RTC_INT_ALRM interrupt only */
+	writel(RTC_INT_ALRM, xrtcdev->reg_base + RTC_INT_DIS);
 
 	if (status & RTC_INT_ALRM)
 		rtc_update_irq(xrtcdev->rtc, 1, RTC_IRQF | RTC_AF);
diff --git a/drivers/rtc/sysfs.c b/drivers/rtc/sysfs.c
index b7ca7d7..950fac0 100644
--- a/drivers/rtc/sysfs.c
+++ b/drivers/rtc/sysfs.c
@@ -279,7 +279,7 @@ static bool rtc_does_wakealarm(struct rtc_device *rtc)
 static umode_t rtc_attr_is_visible(struct kobject *kobj,
 				   struct attribute *attr, int n)
 {
-	struct device *dev = container_of(kobj, struct device, kobj);
+	struct device *dev = kobj_to_dev(kobj);
 	struct rtc_device *rtc = to_rtc_device(dev);
 	umode_t mode = attr->mode;
 
diff --git a/drivers/s390/block/Kconfig b/drivers/s390/block/Kconfig
index a8682f6..376f1ef 100644
--- a/drivers/s390/block/Kconfig
+++ b/drivers/s390/block/Kconfig
@@ -26,7 +26,6 @@
 	def_tristate y
 	prompt "Support for DASD devices"
 	depends on CCW && BLOCK
-	select IOSCHED_DEADLINE
 	help
 	  Enable this option if you want to access DASDs directly utilizing
 	  S/390s channel subsystem commands. This is necessary for running
diff --git a/drivers/s390/block/dasd_diag.c b/drivers/s390/block/dasd_diag.c
index 8d49716..facb588 100644
--- a/drivers/s390/block/dasd_diag.c
+++ b/drivers/s390/block/dasd_diag.c
@@ -58,7 +58,7 @@ struct dasd_diag_private {
 
 struct dasd_diag_req {
 	unsigned int block_count;
-	struct dasd_diag_bio bio[0];
+	struct dasd_diag_bio bio[];
 };
 
 static const u8 DASD_DIAG_CMS1[] = { 0xc3, 0xd4, 0xe2, 0xf1 };/* EBCDIC CMS1 */
diff --git a/drivers/s390/block/dasd_eckd.h b/drivers/s390/block/dasd_eckd.h
index 6943508..ca24a78 100644
--- a/drivers/s390/block/dasd_eckd.h
+++ b/drivers/s390/block/dasd_eckd.h
@@ -220,7 +220,7 @@ struct LRE_eckd_data {
 	__u8 imbedded_count;
 	__u8 extended_operation;
 	__u16 extended_parameter_length;
-	__u8 extended_parameter[0];
+	__u8 extended_parameter[];
 } __attribute__ ((packed));
 
 /* Prefix data for format 0x00 and 0x01 */
diff --git a/drivers/s390/block/dcssblk.c b/drivers/s390/block/dcssblk.c
index 80d2229..384edff 100644
--- a/drivers/s390/block/dcssblk.c
+++ b/drivers/s390/block/dcssblk.c
@@ -57,11 +57,26 @@ static size_t dcssblk_dax_copy_to_iter(struct dax_device *dax_dev,
 	return copy_to_iter(addr, bytes, i);
 }
 
+static int dcssblk_dax_zero_page_range(struct dax_device *dax_dev,
+				       pgoff_t pgoff, size_t nr_pages)
+{
+	long rc;
+	void *kaddr;
+
+	rc = dax_direct_access(dax_dev, pgoff, nr_pages, &kaddr, NULL);
+	if (rc < 0)
+		return rc;
+	memset(kaddr, 0, nr_pages << PAGE_SHIFT);
+	dax_flush(dax_dev, kaddr, nr_pages << PAGE_SHIFT);
+	return 0;
+}
+
 static const struct dax_operations dcssblk_dax_ops = {
 	.direct_access = dcssblk_dax_direct_access,
 	.dax_supported = generic_fsdax_supported,
 	.copy_from_iter = dcssblk_dax_copy_from_iter,
 	.copy_to_iter = dcssblk_dax_copy_to_iter,
+	.zero_page_range = dcssblk_dax_zero_page_range,
 };
 
 struct dcssblk_dev_info {
@@ -680,8 +695,9 @@ dcssblk_add_store(struct device *dev, struct device_attribute *attr, const char
 
 	dev_info->dax_dev = alloc_dax(dev_info, dev_info->gd->disk_name,
 			&dcssblk_dax_ops, DAXDEV_F_SYNC);
-	if (!dev_info->dax_dev) {
-		rc = -ENOMEM;
+	if (IS_ERR(dev_info->dax_dev)) {
+		rc = PTR_ERR(dev_info->dax_dev);
+		dev_info->dax_dev = NULL;
 		goto put_dev;
 	}
 
diff --git a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c
index e7cf0a1..92757f9 100644
--- a/drivers/s390/char/con3215.c
+++ b/drivers/s390/char/con3215.c
@@ -398,7 +398,7 @@ static void raw3215_irq(struct ccw_device *cdev, unsigned long intparm,
 		}
 		if (dstat == 0x08)
 			break;
-		/* else, fall through */
+		fallthrough;
 	case 0x04:
 		/* Device end interrupt. */
 		if ((raw = req->info) == NULL)
diff --git a/drivers/s390/char/hmcdrv_ftp.c b/drivers/s390/char/hmcdrv_ftp.c
index 0e70397..37ee8f6 100644
--- a/drivers/s390/char/hmcdrv_ftp.c
+++ b/drivers/s390/char/hmcdrv_ftp.c
@@ -137,7 +137,7 @@ static int hmcdrv_ftp_parse(char *cmd, struct hmcdrv_ftp_cmdspec *ftp)
 			while ((*cmd != '\0') && !iscntrl(*cmd))
 				++cmd;
 			ftp->fname = start;
-			/* fall through */
+			fallthrough;
 		default:
 			*cmd = '\0';
 			break;
diff --git a/drivers/s390/char/raw3270.h b/drivers/s390/char/raw3270.h
index 3afaa35..08f36e9 100644
--- a/drivers/s390/char/raw3270.h
+++ b/drivers/s390/char/raw3270.h
@@ -211,7 +211,7 @@ struct string
 	struct list_head update;
 	unsigned long size;
 	unsigned long len;
-	char string[0];
+	char string[];
 } __attribute__ ((aligned(8)));
 
 static inline struct string *
diff --git a/drivers/s390/char/sclp_cmd.c b/drivers/s390/char/sclp_cmd.c
index 37d42de..a864b21 100644
--- a/drivers/s390/char/sclp_cmd.c
+++ b/drivers/s390/char/sclp_cmd.c
@@ -406,7 +406,7 @@ static void __init add_memory_merged(u16 rn)
 	if (!size)
 		goto skip_add;
 	for (addr = start; addr < start + size; addr += block_size)
-		add_memory(numa_pfn_to_nid(PFN_DOWN(addr)), addr, block_size);
+		add_memory(0, addr, block_size);
 skip_add:
 	first_rn = rn;
 	num = 1;
diff --git a/drivers/s390/char/sclp_pci.c b/drivers/s390/char/sclp_pci.c
index 995e919..a3e5a5f 100644
--- a/drivers/s390/char/sclp_pci.c
+++ b/drivers/s390/char/sclp_pci.c
@@ -39,7 +39,7 @@ struct err_notify_evbuf {
 	u8 atype;
 	u32 fh;
 	u32 fid;
-	u8 data[0];
+	u8 data[];
 } __packed;
 
 struct err_notify_sccb {
diff --git a/drivers/s390/char/sclp_sdias.c b/drivers/s390/char/sclp_sdias.c
index 13f97fd..644b610 100644
--- a/drivers/s390/char/sclp_sdias.c
+++ b/drivers/s390/char/sclp_sdias.c
@@ -214,7 +214,7 @@ int sclp_sdias_copy(void *dest, int start_blk, int nr_blks)
 		break;
 	case SDIAS_EVSTATE_NO_DATA:
 		TRACE("no data\n");
-		/* fall through */
+		fallthrough;
 	default:
 		pr_err("Error from SCLP while copying hsa. Event status = %x\n",
 		       sdias_evbuf.event_status);
diff --git a/drivers/s390/char/tape_core.c b/drivers/s390/char/tape_core.c
index 3e0b2f6..380e6a6 100644
--- a/drivers/s390/char/tape_core.c
+++ b/drivers/s390/char/tape_core.c
@@ -677,7 +677,7 @@ tape_generic_remove(struct ccw_device *cdev)
 	switch (device->tape_state) {
 		case TS_INIT:
 			tape_state_set(device, TS_NOT_OPER);
-			/* fallthrough */
+			fallthrough;
 		case TS_NOT_OPER:
 			/*
 			 * Nothing to do.
@@ -950,7 +950,7 @@ __tape_start_request(struct tape_device *device, struct tape_request *request)
 				break;
 			if (device->tape_state == TS_UNUSED)
 				break;
-			/* fallthrough */
+			fallthrough;
 		default:
 			if (device->tape_state == TS_BLKUSE)
 				break;
@@ -1118,7 +1118,7 @@ __tape_do_irq (struct ccw_device *cdev, unsigned long intparm, struct irb *irb)
 			case -ETIMEDOUT:
 				DBF_LH(1, "(%08x): Request timed out\n",
 				       device->cdev_id);
-				/* fallthrough */
+				fallthrough;
 			case -EIO:
 				__tape_end_request(device, request, -EIO);
 				break;
diff --git a/drivers/s390/cio/airq.c b/drivers/s390/cio/airq.c
index 427b2e2..cb466ed 100644
--- a/drivers/s390/cio/airq.c
+++ b/drivers/s390/cio/airq.c
@@ -105,16 +105,12 @@ static irqreturn_t do_airq_interrupt(int irq, void *dummy)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction airq_interrupt = {
-	.name	 = "AIO",
-	.handler = do_airq_interrupt,
-};
-
 void __init init_airq_interrupts(void)
 {
 	irq_set_chip_and_handler(THIN_INTERRUPT,
 				 &dummy_irq_chip, handle_percpu_irq);
-	setup_irq(THIN_INTERRUPT, &airq_interrupt);
+	if (request_irq(THIN_INTERRUPT, do_airq_interrupt, 0, "AIO", NULL))
+		panic("Failed to register AIO interrupt\n");
 }
 
 static inline unsigned long iv_size(unsigned long bits)
diff --git a/drivers/s390/cio/ccwgroup.c b/drivers/s390/cio/ccwgroup.c
index b42a937..483a9ec 100644
--- a/drivers/s390/cio/ccwgroup.c
+++ b/drivers/s390/cio/ccwgroup.c
@@ -485,79 +485,10 @@ static void ccwgroup_shutdown(struct device *dev)
 		gdrv->shutdown(gdev);
 }
 
-static int ccwgroup_pm_prepare(struct device *dev)
-{
-	struct ccwgroup_device *gdev = to_ccwgroupdev(dev);
-	struct ccwgroup_driver *gdrv = to_ccwgroupdrv(gdev->dev.driver);
-
-	/* Fail while device is being set online/offline. */
-	if (atomic_read(&gdev->onoff))
-		return -EAGAIN;
-
-	if (!gdev->dev.driver || gdev->state != CCWGROUP_ONLINE)
-		return 0;
-
-	return gdrv->prepare ? gdrv->prepare(gdev) : 0;
-}
-
-static void ccwgroup_pm_complete(struct device *dev)
-{
-	struct ccwgroup_device *gdev = to_ccwgroupdev(dev);
-	struct ccwgroup_driver *gdrv = to_ccwgroupdrv(dev->driver);
-
-	if (!gdev->dev.driver || gdev->state != CCWGROUP_ONLINE)
-		return;
-
-	if (gdrv->complete)
-		gdrv->complete(gdev);
-}
-
-static int ccwgroup_pm_freeze(struct device *dev)
-{
-	struct ccwgroup_device *gdev = to_ccwgroupdev(dev);
-	struct ccwgroup_driver *gdrv = to_ccwgroupdrv(gdev->dev.driver);
-
-	if (!gdev->dev.driver || gdev->state != CCWGROUP_ONLINE)
-		return 0;
-
-	return gdrv->freeze ? gdrv->freeze(gdev) : 0;
-}
-
-static int ccwgroup_pm_thaw(struct device *dev)
-{
-	struct ccwgroup_device *gdev = to_ccwgroupdev(dev);
-	struct ccwgroup_driver *gdrv = to_ccwgroupdrv(gdev->dev.driver);
-
-	if (!gdev->dev.driver || gdev->state != CCWGROUP_ONLINE)
-		return 0;
-
-	return gdrv->thaw ? gdrv->thaw(gdev) : 0;
-}
-
-static int ccwgroup_pm_restore(struct device *dev)
-{
-	struct ccwgroup_device *gdev = to_ccwgroupdev(dev);
-	struct ccwgroup_driver *gdrv = to_ccwgroupdrv(gdev->dev.driver);
-
-	if (!gdev->dev.driver || gdev->state != CCWGROUP_ONLINE)
-		return 0;
-
-	return gdrv->restore ? gdrv->restore(gdev) : 0;
-}
-
-static const struct dev_pm_ops ccwgroup_pm_ops = {
-	.prepare = ccwgroup_pm_prepare,
-	.complete = ccwgroup_pm_complete,
-	.freeze = ccwgroup_pm_freeze,
-	.thaw = ccwgroup_pm_thaw,
-	.restore = ccwgroup_pm_restore,
-};
-
 static struct bus_type ccwgroup_bus_type = {
 	.name   = "ccwgroup",
 	.remove = ccwgroup_remove,
 	.shutdown = ccwgroup_shutdown,
-	.pm = &ccwgroup_pm_ops,
 };
 
 bool dev_is_ccwgroup(struct device *dev)
diff --git a/drivers/s390/cio/chsc.c b/drivers/s390/cio/chsc.c
index 6392a1b..1ca73c2 100644
--- a/drivers/s390/cio/chsc.c
+++ b/drivers/s390/cio/chsc.c
@@ -180,11 +180,12 @@ EXPORT_SYMBOL_GPL(chsc_ssqd);
  * @scssc: request and response block for SADC
  * @summary_indicator_addr: summary indicator address
  * @subchannel_indicator_addr: subchannel indicator address
+ * @isc: Interruption Subclass for this subchannel
  *
  * Returns 0 on success.
  */
 int chsc_sadc(struct subchannel_id schid, struct chsc_scssc_area *scssc,
-	      u64 summary_indicator_addr, u64 subchannel_indicator_addr)
+	      u64 summary_indicator_addr, u64 subchannel_indicator_addr, u8 isc)
 {
 	memset(scssc, 0, sizeof(*scssc));
 	scssc->request.length = 0x0fe0;
@@ -196,7 +197,7 @@ int chsc_sadc(struct subchannel_id schid, struct chsc_scssc_area *scssc,
 
 	scssc->ks = PAGE_DEFAULT_KEY >> 4;
 	scssc->kc = PAGE_DEFAULT_KEY >> 4;
-	scssc->isc = QDIO_AIRQ_ISC;
+	scssc->isc = isc;
 	scssc->schid = schid;
 
 	/* enable the time delay disablement facility */
diff --git a/drivers/s390/cio/chsc.h b/drivers/s390/cio/chsc.h
index e57d68e..34de6d77 100644
--- a/drivers/s390/cio/chsc.h
+++ b/drivers/s390/cio/chsc.h
@@ -163,7 +163,8 @@ void chsc_chp_offline(struct chp_id chpid);
 int chsc_get_channel_measurement_chars(struct channel_path *chp);
 int chsc_ssqd(struct subchannel_id schid, struct chsc_ssqd_area *ssqd);
 int chsc_sadc(struct subchannel_id schid, struct chsc_scssc_area *scssc,
-	      u64 summary_indicator_addr, u64 subchannel_indicator_addr);
+	      u64 summary_indicator_addr, u64 subchannel_indicator_addr,
+	      u8 isc);
 int chsc_sgib(u32 origin);
 int chsc_error_from_response(int response);
 
diff --git a/drivers/s390/cio/cio.c b/drivers/s390/cio/cio.c
index 18f5458..6d716db 100644
--- a/drivers/s390/cio/cio.c
+++ b/drivers/s390/cio/cio.c
@@ -563,16 +563,12 @@ static irqreturn_t do_cio_interrupt(int irq, void *dummy)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction io_interrupt = {
-	.name	 = "I/O",
-	.handler = do_cio_interrupt,
-};
-
 void __init init_cio_interrupts(void)
 {
 	irq_set_chip_and_handler(IO_INTERRUPT,
 				 &dummy_irq_chip, handle_percpu_irq);
-	setup_irq(IO_INTERRUPT, &io_interrupt);
+	if (request_irq(IO_INTERRUPT, do_cio_interrupt, 0, "I/O", NULL))
+		panic("Failed to register I/O interrupt\n");
 }
 
 #ifdef CONFIG_CCW_CONSOLE
diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c
index 0c6245f..b29fe8d 100644
--- a/drivers/s390/cio/device.c
+++ b/drivers/s390/cio/device.c
@@ -849,8 +849,10 @@ static void io_subchannel_register(struct ccw_device *cdev)
 	 * Now we know this subchannel will stay, we can throw
 	 * our delayed uevent.
 	 */
-	dev_set_uevent_suppress(&sch->dev, 0);
-	kobject_uevent(&sch->dev.kobj, KOBJ_ADD);
+	if (dev_get_uevent_suppress(&sch->dev)) {
+		dev_set_uevent_suppress(&sch->dev, 0);
+		kobject_uevent(&sch->dev.kobj, KOBJ_ADD);
+	}
 	/* make it known to the system */
 	ret = ccw_device_add(cdev);
 	if (ret) {
@@ -1058,8 +1060,11 @@ static int io_subchannel_probe(struct subchannel *sch)
 		 * Throw the delayed uevent for the subchannel, register
 		 * the ccw_device and exit.
 		 */
-		dev_set_uevent_suppress(&sch->dev, 0);
-		kobject_uevent(&sch->dev.kobj, KOBJ_ADD);
+		if (dev_get_uevent_suppress(&sch->dev)) {
+			/* should always be the case for the console */
+			dev_set_uevent_suppress(&sch->dev, 0);
+			kobject_uevent(&sch->dev.kobj, KOBJ_ADD);
+		}
 		cdev = sch_get_cdev(sch);
 		rc = ccw_device_add(cdev);
 		if (rc) {
@@ -1262,7 +1267,7 @@ static int recovery_check(struct device *dev, void *data)
 		sch = to_subchannel(cdev->dev.parent);
 		if ((sch->schib.pmcw.pam & sch->opm) == sch->vpm)
 			break;
-		/* fall through */
+		fallthrough;
 	case DEV_STATE_DISCONNECTED:
 		CIO_MSG_EVENT(3, "recovery: trigger 0.%x.%04x\n",
 			      cdev->private->dev_id.ssid,
@@ -2091,7 +2096,7 @@ static void ccw_device_todo(struct work_struct *work)
 	case CDEV_TODO_UNREG_EVAL:
 		if (!sch_is_pseudo_sch(sch))
 			css_schedule_eval(sch->schid);
-		/* fall-through */
+		fallthrough;
 	case CDEV_TODO_UNREG:
 		if (sch_is_pseudo_sch(sch))
 			ccw_device_unregister(cdev);
diff --git a/drivers/s390/cio/idset.c b/drivers/s390/cio/idset.c
index 835de44..77d0ea7 100644
--- a/drivers/s390/cio/idset.c
+++ b/drivers/s390/cio/idset.c
@@ -13,7 +13,7 @@
 struct idset {
 	int num_ssid;
 	int num_id;
-	unsigned long bitmap[0];
+	unsigned long bitmap[];
 };
 
 static inline unsigned long bitmap_size(int num_ssid, int num_id)
diff --git a/drivers/s390/cio/qdio.h b/drivers/s390/cio/qdio.h
index f72f961..b8453b5 100644
--- a/drivers/s390/cio/qdio.h
+++ b/drivers/s390/cio/qdio.h
@@ -250,7 +250,6 @@ struct qdio_q {
 	/* upper-layer program handler */
 	qdio_handler_t (*handler);
 
-	struct dentry *debugfs_q;
 	struct qdio_irq *irq_ptr;
 	struct sl *sl;
 	/*
@@ -266,7 +265,6 @@ struct qdio_irq {
 	struct ccw_device *cdev;
 	struct list_head entry;		/* list of thinint devices */
 	struct dentry *debugfs_dev;
-	struct dentry *debugfs_perf;
 
 	unsigned long int_parm;
 	struct subchannel_id schid;
@@ -376,7 +374,6 @@ int tiqdio_allocate_memory(void);
 void tiqdio_free_memory(void);
 int tiqdio_register_thinints(void);
 void tiqdio_unregister_thinints(void);
-void clear_nonshared_ind(struct qdio_irq *);
 int test_nonshared_ind(struct qdio_irq *);
 
 /* prototypes for setup */
@@ -391,12 +388,9 @@ void qdio_setup_ssqd_info(struct qdio_irq *irq_ptr);
 int qdio_setup_get_ssqd(struct qdio_irq *irq_ptr,
 			struct subchannel_id *schid,
 			struct qdio_ssqd_desc *data);
-int qdio_setup_irq(struct qdio_initialize *init_data);
-void qdio_print_subchannel_info(struct qdio_irq *irq_ptr,
-				struct ccw_device *cdev);
+int qdio_setup_irq(struct qdio_irq *irq_ptr, struct qdio_initialize *init_data);
+void qdio_print_subchannel_info(struct qdio_irq *irq_ptr);
 void qdio_release_memory(struct qdio_irq *irq_ptr);
-int qdio_setup_create_sysfs(struct ccw_device *cdev);
-void qdio_setup_destroy_sysfs(struct ccw_device *cdev);
 int qdio_setup_init(void);
 void qdio_setup_exit(void);
 int qdio_enable_async_operation(struct qdio_output_q *q);
diff --git a/drivers/s390/cio/qdio_debug.c b/drivers/s390/cio/qdio_debug.c
index 0024460..286b044 100644
--- a/drivers/s390/cio/qdio_debug.c
+++ b/drivers/s390/cio/qdio_debug.c
@@ -58,30 +58,16 @@ static void qdio_clear_dbf_list(void)
 	mutex_unlock(&qdio_dbf_list_mutex);
 }
 
-int qdio_allocate_dbf(struct qdio_initialize *init_data,
-		       struct qdio_irq *irq_ptr)
+int qdio_allocate_dbf(struct qdio_irq *irq_ptr)
 {
 	char text[QDIO_DBF_NAME_LEN];
 	struct qdio_dbf_entry *new_entry;
 
-	DBF_EVENT("qfmt:%1d", init_data->q_format);
-	DBF_HEX(init_data->adapter_name, 8);
-	DBF_EVENT("qpff%4x", init_data->qib_param_field_format);
-	DBF_HEX(&init_data->qib_param_field, sizeof(void *));
-	DBF_HEX(&init_data->input_slib_elements, sizeof(void *));
-	DBF_HEX(&init_data->output_slib_elements, sizeof(void *));
-	DBF_EVENT("niq:%1d noq:%1d", init_data->no_input_qs,
-		  init_data->no_output_qs);
-	DBF_HEX(&init_data->input_handler, sizeof(void *));
-	DBF_HEX(&init_data->output_handler, sizeof(void *));
-	DBF_HEX(&init_data->int_parm, sizeof(long));
-	DBF_HEX(&init_data->input_sbal_addr_array, sizeof(void *));
-	DBF_HEX(&init_data->output_sbal_addr_array, sizeof(void *));
 	DBF_EVENT("irq:%8lx", (unsigned long)irq_ptr);
 
 	/* allocate trace view for the interface */
 	snprintf(text, QDIO_DBF_NAME_LEN, "qdio_%s",
-					dev_name(&init_data->cdev->dev));
+		 dev_name(&irq_ptr->cdev->dev));
 	irq_ptr->debug_area = qdio_get_dbf_entry(text);
 	if (irq_ptr->debug_area)
 		DBF_DEV_EVENT(DBF_ERR, irq_ptr, "dbf reused");
@@ -190,6 +176,23 @@ static int qstat_show(struct seq_file *m, void *v)
 
 DEFINE_SHOW_ATTRIBUTE(qstat);
 
+static int ssqd_show(struct seq_file *m, void *v)
+{
+	struct ccw_device *cdev = m->private;
+	struct qdio_ssqd_desc ssqd;
+	int rc;
+
+	rc = qdio_get_ssqd_desc(cdev, &ssqd);
+	if (rc)
+		return rc;
+
+	seq_hex_dump(m, "", DUMP_PREFIX_NONE, 16, 4, &ssqd, sizeof(ssqd),
+		     false);
+	return 0;
+}
+
+DEFINE_SHOW_ATTRIBUTE(ssqd);
+
 static char *qperf_names[] = {
 	"Assumed adapter interrupts",
 	"QDIO interrupts",
@@ -284,53 +287,37 @@ static const struct file_operations debugfs_perf_fops = {
 	.release = single_release,
 };
 
-static void setup_debugfs_entry(struct qdio_q *q)
+static void setup_debugfs_entry(struct dentry *parent, struct qdio_q *q)
 {
 	char name[QDIO_DEBUGFS_NAME_LEN];
 
 	snprintf(name, QDIO_DEBUGFS_NAME_LEN, "%s_%d",
 		 q->is_input_q ? "input" : "output",
 		 q->nr);
-	q->debugfs_q = debugfs_create_file(name, 0444,
-				q->irq_ptr->debugfs_dev, q, &qstat_fops);
-	if (IS_ERR(q->debugfs_q))
-		q->debugfs_q = NULL;
+	debugfs_create_file(name, 0444, parent, q, &qstat_fops);
 }
 
-void qdio_setup_debug_entries(struct qdio_irq *irq_ptr, struct ccw_device *cdev)
+void qdio_setup_debug_entries(struct qdio_irq *irq_ptr)
 {
 	struct qdio_q *q;
 	int i;
 
-	irq_ptr->debugfs_dev = debugfs_create_dir(dev_name(&cdev->dev),
+	irq_ptr->debugfs_dev = debugfs_create_dir(dev_name(&irq_ptr->cdev->dev),
 						  debugfs_root);
-	if (IS_ERR(irq_ptr->debugfs_dev))
-		irq_ptr->debugfs_dev = NULL;
-
-	irq_ptr->debugfs_perf = debugfs_create_file("statistics",
-				S_IFREG | S_IRUGO | S_IWUSR,
-				irq_ptr->debugfs_dev, irq_ptr,
-				&debugfs_perf_fops);
-	if (IS_ERR(irq_ptr->debugfs_perf))
-		irq_ptr->debugfs_perf = NULL;
+	debugfs_create_file("statistics", S_IFREG | S_IRUGO | S_IWUSR,
+			    irq_ptr->debugfs_dev, irq_ptr, &debugfs_perf_fops);
+	debugfs_create_file("ssqd", 0444, irq_ptr->debugfs_dev, irq_ptr->cdev,
+			    &ssqd_fops);
 
 	for_each_input_queue(irq_ptr, q, i)
-		setup_debugfs_entry(q);
+		setup_debugfs_entry(irq_ptr->debugfs_dev, q);
 	for_each_output_queue(irq_ptr, q, i)
-		setup_debugfs_entry(q);
+		setup_debugfs_entry(irq_ptr->debugfs_dev, q);
 }
 
 void qdio_shutdown_debug_entries(struct qdio_irq *irq_ptr)
 {
-	struct qdio_q *q;
-	int i;
-
-	for_each_input_queue(irq_ptr, q, i)
-		debugfs_remove(q->debugfs_q);
-	for_each_output_queue(irq_ptr, q, i)
-		debugfs_remove(q->debugfs_q);
-	debugfs_remove(irq_ptr->debugfs_perf);
-	debugfs_remove(irq_ptr->debugfs_dev);
+	debugfs_remove_recursive(irq_ptr->debugfs_dev);
 }
 
 int __init qdio_debug_init(void)
@@ -352,7 +339,7 @@ int __init qdio_debug_init(void)
 void qdio_debug_exit(void)
 {
 	qdio_clear_dbf_list();
-	debugfs_remove(debugfs_root);
+	debugfs_remove_recursive(debugfs_root);
 	debug_unregister(qdio_dbf_setup);
 	debug_unregister(qdio_dbf_error);
 }
diff --git a/drivers/s390/cio/qdio_debug.h b/drivers/s390/cio/qdio_debug.h
index f85f5fa..0dfba08 100644
--- a/drivers/s390/cio/qdio_debug.h
+++ b/drivers/s390/cio/qdio_debug.h
@@ -64,10 +64,8 @@ static inline void DBF_DEV_HEX(struct qdio_irq *dev, void *addr,
 	debug_event(dev->debug_area, level, addr, len);
 }
 
-int qdio_allocate_dbf(struct qdio_initialize *init_data,
-		       struct qdio_irq *irq_ptr);
-void qdio_setup_debug_entries(struct qdio_irq *irq_ptr,
-			      struct ccw_device *cdev);
+int qdio_allocate_dbf(struct qdio_irq *irq_ptr);
+void qdio_setup_debug_entries(struct qdio_irq *irq_ptr);
 void qdio_shutdown_debug_entries(struct qdio_irq *irq_ptr);
 int qdio_debug_init(void);
 void qdio_debug_exit(void);
diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c
index 02ced59..bcc3ab1 100644
--- a/drivers/s390/cio/qdio_main.c
+++ b/drivers/s390/cio/qdio_main.c
@@ -1100,9 +1100,8 @@ int qdio_get_ssqd_desc(struct ccw_device *cdev,
 }
 EXPORT_SYMBOL_GPL(qdio_get_ssqd_desc);
 
-static void qdio_shutdown_queues(struct ccw_device *cdev)
+static void qdio_shutdown_queues(struct qdio_irq *irq_ptr)
 {
-	struct qdio_irq *irq_ptr = cdev->private->qdio_data;
 	struct qdio_q *q;
 	int i;
 
@@ -1150,7 +1149,7 @@ int qdio_shutdown(struct ccw_device *cdev, int how)
 	qdio_set_state(irq_ptr, QDIO_IRQ_STATE_STOPPED);
 
 	tiqdio_remove_device(irq_ptr);
-	qdio_shutdown_queues(cdev);
+	qdio_shutdown_queues(irq_ptr);
 	qdio_shutdown_debug_entries(irq_ptr);
 
 	/* cleanup subchannel */
@@ -1221,26 +1220,21 @@ EXPORT_SYMBOL_GPL(qdio_free);
 
 /**
  * qdio_allocate - allocate qdio queues and associated data
- * @init_data: initialization data
+ * @cdev: associated ccw device
+ * @no_input_qs: allocate this number of Input Queues
+ * @no_output_qs: allocate this number of Output Queues
  */
-int qdio_allocate(struct qdio_initialize *init_data)
+int qdio_allocate(struct ccw_device *cdev, unsigned int no_input_qs,
+		  unsigned int no_output_qs)
 {
 	struct subchannel_id schid;
 	struct qdio_irq *irq_ptr;
 
-	ccw_device_get_schid(init_data->cdev, &schid);
+	ccw_device_get_schid(cdev, &schid);
 	DBF_EVENT("qallocate:%4x", schid.sch_no);
 
-	if ((init_data->no_input_qs && !init_data->input_handler) ||
-	    (init_data->no_output_qs && !init_data->output_handler))
-		return -EINVAL;
-
-	if ((init_data->no_input_qs > QDIO_MAX_QUEUES_PER_IRQ) ||
-	    (init_data->no_output_qs > QDIO_MAX_QUEUES_PER_IRQ))
-		return -EINVAL;
-
-	if ((!init_data->input_sbal_addr_array) ||
-	    (!init_data->output_sbal_addr_array))
+	if (no_input_qs > QDIO_MAX_QUEUES_PER_IRQ ||
+	    no_output_qs > QDIO_MAX_QUEUES_PER_IRQ)
 		return -EINVAL;
 
 	/* irq_ptr must be in GFP_DMA since it contains ccw1.cda */
@@ -1248,10 +1242,14 @@ int qdio_allocate(struct qdio_initialize *init_data)
 	if (!irq_ptr)
 		goto out_err;
 
+	irq_ptr->cdev = cdev;
 	mutex_init(&irq_ptr->setup_mutex);
-	if (qdio_allocate_dbf(init_data, irq_ptr))
+	if (qdio_allocate_dbf(irq_ptr))
 		goto out_rel;
 
+	DBF_DEV_EVENT(DBF_ERR, irq_ptr, "alloc niq:%1u noq:%1u", no_input_qs,
+		      no_output_qs);
+
 	/*
 	 * Allocate a page for the chsc calls in qdio_establish.
 	 * Must be pre-allocated since a zfcp recovery will call
@@ -1267,12 +1265,11 @@ int qdio_allocate(struct qdio_initialize *init_data)
 	if (!irq_ptr->qdr)
 		goto out_rel;
 
-	if (qdio_allocate_qs(irq_ptr, init_data->no_input_qs,
-			     init_data->no_output_qs))
+	if (qdio_allocate_qs(irq_ptr, no_input_qs, no_output_qs))
 		goto out_rel;
 
 	INIT_LIST_HEAD(&irq_ptr->entry);
-	init_data->cdev->private->qdio_data = irq_ptr;
+	cdev->private->qdio_data = irq_ptr;
 	qdio_set_state(irq_ptr, QDIO_IRQ_STATE_INACTIVE);
 	return 0;
 out_rel:
@@ -1304,26 +1301,54 @@ static void qdio_detect_hsicq(struct qdio_irq *irq_ptr)
 	DBF_EVENT("use_cq:%d", use_cq);
 }
 
+static void qdio_trace_init_data(struct qdio_irq *irq,
+				 struct qdio_initialize *data)
+{
+	DBF_DEV_EVENT(DBF_ERR, irq, "qfmt:%1u", data->q_format);
+	DBF_DEV_HEX(irq, data->adapter_name, 8, DBF_ERR);
+	DBF_DEV_EVENT(DBF_ERR, irq, "qpff%4x", data->qib_param_field_format);
+	DBF_DEV_HEX(irq, &data->qib_param_field, sizeof(void *), DBF_ERR);
+	DBF_DEV_HEX(irq, &data->input_slib_elements, sizeof(void *), DBF_ERR);
+	DBF_DEV_HEX(irq, &data->output_slib_elements, sizeof(void *), DBF_ERR);
+	DBF_DEV_EVENT(DBF_ERR, irq, "niq:%1u noq:%1u", data->no_input_qs,
+		      data->no_output_qs);
+	DBF_DEV_HEX(irq, &data->input_handler, sizeof(void *), DBF_ERR);
+	DBF_DEV_HEX(irq, &data->output_handler, sizeof(void *), DBF_ERR);
+	DBF_DEV_HEX(irq, &data->int_parm, sizeof(long), DBF_ERR);
+	DBF_DEV_HEX(irq, &data->input_sbal_addr_array, sizeof(void *), DBF_ERR);
+	DBF_DEV_HEX(irq, &data->output_sbal_addr_array, sizeof(void *),
+		    DBF_ERR);
+}
+
 /**
  * qdio_establish - establish queues on a qdio subchannel
+ * @cdev: associated ccw device
  * @init_data: initialization data
  */
-int qdio_establish(struct qdio_initialize *init_data)
+int qdio_establish(struct ccw_device *cdev,
+		   struct qdio_initialize *init_data)
 {
-	struct ccw_device *cdev = init_data->cdev;
+	struct qdio_irq *irq_ptr = cdev->private->qdio_data;
 	struct subchannel_id schid;
-	struct qdio_irq *irq_ptr;
 	int rc;
 
 	ccw_device_get_schid(cdev, &schid);
 	DBF_EVENT("qestablish:%4x", schid.sch_no);
 
-	irq_ptr = cdev->private->qdio_data;
 	if (!irq_ptr)
 		return -ENODEV;
 
+	if ((init_data->no_input_qs && !init_data->input_handler) ||
+	    (init_data->no_output_qs && !init_data->output_handler))
+		return -EINVAL;
+
+	if (!init_data->input_sbal_addr_array ||
+	    !init_data->output_sbal_addr_array)
+		return -EINVAL;
+
 	mutex_lock(&irq_ptr->setup_mutex);
-	qdio_setup_irq(init_data);
+	qdio_trace_init_data(irq_ptr, init_data);
+	qdio_setup_irq(irq_ptr, init_data);
 
 	rc = qdio_establish_thinint(irq_ptr);
 	if (rc) {
@@ -1369,8 +1394,8 @@ int qdio_establish(struct qdio_initialize *init_data)
 	qdio_init_buf_states(irq_ptr);
 
 	mutex_unlock(&irq_ptr->setup_mutex);
-	qdio_print_subchannel_info(irq_ptr, cdev);
-	qdio_setup_debug_entries(irq_ptr, cdev);
+	qdio_print_subchannel_info(irq_ptr);
+	qdio_setup_debug_entries(irq_ptr);
 	return 0;
 }
 EXPORT_SYMBOL_GPL(qdio_establish);
@@ -1381,14 +1406,13 @@ EXPORT_SYMBOL_GPL(qdio_establish);
  */
 int qdio_activate(struct ccw_device *cdev)
 {
+	struct qdio_irq *irq_ptr = cdev->private->qdio_data;
 	struct subchannel_id schid;
-	struct qdio_irq *irq_ptr;
 	int rc;
 
 	ccw_device_get_schid(cdev, &schid);
 	DBF_EVENT("qactivate:%4x", schid.sch_no);
 
-	irq_ptr = cdev->private->qdio_data;
 	if (!irq_ptr)
 		return -ENODEV;
 
@@ -1619,8 +1643,6 @@ int qdio_start_irq(struct ccw_device *cdev)
 	if (!irq_ptr)
 		return -ENODEV;
 
-	clear_nonshared_ind(irq_ptr);
-
 	for_each_input_queue(irq_ptr, q, i)
 		qdio_stop_polling(q);
 
diff --git a/drivers/s390/cio/qdio_setup.c b/drivers/s390/cio/qdio_setup.c
index 7b831bb..3083edd 100644
--- a/drivers/s390/cio/qdio_setup.c
+++ b/drivers/s390/cio/qdio_setup.c
@@ -213,8 +213,6 @@ static void setup_queues(struct qdio_irq *irq_ptr,
 			 struct qdio_initialize *qdio_init)
 {
 	struct qdio_q *q;
-	struct qdio_buffer **input_sbal_array = qdio_init->input_sbal_addr_array;
-	struct qdio_buffer **output_sbal_array = qdio_init->output_sbal_addr_array;
 	struct qdio_outbuf_state *output_sbal_state_array =
 				  qdio_init->output_sbal_state_array;
 	int i;
@@ -225,8 +223,8 @@ static void setup_queues(struct qdio_irq *irq_ptr,
 
 		q->is_input_q = 1;
 
-		setup_storage_lists(q, irq_ptr, input_sbal_array, i);
-		input_sbal_array += QDIO_MAX_BUFFERS_PER_Q;
+		setup_storage_lists(q, irq_ptr,
+				    qdio_init->input_sbal_addr_array[i], i);
 
 		if (is_thinint_irq(irq_ptr)) {
 			tasklet_init(&q->tasklet, tiqdio_inbound_processing,
@@ -245,8 +243,8 @@ static void setup_queues(struct qdio_irq *irq_ptr,
 		output_sbal_state_array += QDIO_MAX_BUFFERS_PER_Q;
 
 		q->is_input_q = 0;
-		setup_storage_lists(q, irq_ptr, output_sbal_array, i);
-		output_sbal_array += QDIO_MAX_BUFFERS_PER_Q;
+		setup_storage_lists(q, irq_ptr,
+				    qdio_init->output_sbal_addr_array[i], i);
 
 		tasklet_init(&q->tasklet, qdio_outbound_processing,
 			     (unsigned long) q);
@@ -449,10 +447,10 @@ static void setup_qib(struct qdio_irq *irq_ptr,
 	memcpy(irq_ptr->qib.ebcnam, init_data->adapter_name, 8);
 }
 
-int qdio_setup_irq(struct qdio_initialize *init_data)
+int qdio_setup_irq(struct qdio_irq *irq_ptr, struct qdio_initialize *init_data)
 {
+	struct ccw_device *cdev = irq_ptr->cdev;
 	struct ciw *ciw;
-	struct qdio_irq *irq_ptr = init_data->cdev->private->qdio_data;
 
 	memset(&irq_ptr->qib, 0, sizeof(irq_ptr->qib));
 	memset(&irq_ptr->siga_flag, 0, sizeof(irq_ptr->siga_flag));
@@ -460,8 +458,9 @@ int qdio_setup_irq(struct qdio_initialize *init_data)
 	memset(&irq_ptr->ssqd_desc, 0, sizeof(irq_ptr->ssqd_desc));
 	memset(&irq_ptr->perf_stat, 0, sizeof(irq_ptr->perf_stat));
 
-	irq_ptr->debugfs_dev = irq_ptr->debugfs_perf = NULL;
-	irq_ptr->sch_token = irq_ptr->state = irq_ptr->perf_stat_enabled = 0;
+	irq_ptr->debugfs_dev = NULL;
+	irq_ptr->sch_token = irq_ptr->perf_stat_enabled = 0;
+	irq_ptr->state = QDIO_IRQ_STATE_INACTIVE;
 
 	/* wipes qib.ac, required by ar7063 */
 	memset(irq_ptr->qdr, 0, sizeof(struct qdr));
@@ -469,9 +468,8 @@ int qdio_setup_irq(struct qdio_initialize *init_data)
 	irq_ptr->int_parm = init_data->int_parm;
 	irq_ptr->nr_input_qs = init_data->no_input_qs;
 	irq_ptr->nr_output_qs = init_data->no_output_qs;
-	irq_ptr->cdev = init_data->cdev;
 	irq_ptr->scan_threshold = init_data->scan_threshold;
-	ccw_device_get_schid(irq_ptr->cdev, &irq_ptr->schid);
+	ccw_device_get_schid(cdev, &irq_ptr->schid);
 	setup_queues(irq_ptr, init_data);
 
 	if (init_data->irq_poll) {
@@ -494,14 +492,14 @@ int qdio_setup_irq(struct qdio_initialize *init_data)
 	/* qdr, qib, sls, slsbs, slibs, sbales are filled now */
 
 	/* get qdio commands */
-	ciw = ccw_device_get_ciw(init_data->cdev, CIW_TYPE_EQUEUE);
+	ciw = ccw_device_get_ciw(cdev, CIW_TYPE_EQUEUE);
 	if (!ciw) {
 		DBF_ERROR("%4x NO EQ", irq_ptr->schid.sch_no);
 		return -EINVAL;
 	}
 	irq_ptr->equeue = *ciw;
 
-	ciw = ccw_device_get_ciw(init_data->cdev, CIW_TYPE_AQUEUE);
+	ciw = ccw_device_get_ciw(cdev, CIW_TYPE_AQUEUE);
 	if (!ciw) {
 		DBF_ERROR("%4x NO AQ", irq_ptr->schid.sch_no);
 		return -EINVAL;
@@ -509,21 +507,20 @@ int qdio_setup_irq(struct qdio_initialize *init_data)
 	irq_ptr->aqueue = *ciw;
 
 	/* set new interrupt handler */
-	spin_lock_irq(get_ccwdev_lock(irq_ptr->cdev));
-	irq_ptr->orig_handler = init_data->cdev->handler;
-	init_data->cdev->handler = qdio_int_handler;
-	spin_unlock_irq(get_ccwdev_lock(irq_ptr->cdev));
+	spin_lock_irq(get_ccwdev_lock(cdev));
+	irq_ptr->orig_handler = cdev->handler;
+	cdev->handler = qdio_int_handler;
+	spin_unlock_irq(get_ccwdev_lock(cdev));
 	return 0;
 }
 
-void qdio_print_subchannel_info(struct qdio_irq *irq_ptr,
-				struct ccw_device *cdev)
+void qdio_print_subchannel_info(struct qdio_irq *irq_ptr)
 {
 	char s[80];
 
 	snprintf(s, 80, "qdio: %s %s on SC %x using "
 		 "AI:%d QEBSM:%d PRI:%d TDD:%d SIGA:%s%s%s%s%s\n",
-		 dev_name(&cdev->dev),
+		 dev_name(&irq_ptr->cdev->dev),
 		 (irq_ptr->qib.qfmt == QDIO_QETH_QFMT) ? "OSA" :
 			((irq_ptr->qib.qfmt == QDIO_ZFCP_QFMT) ? "ZFCP" : "HS"),
 		 irq_ptr->schid.sch_no,
diff --git a/drivers/s390/cio/qdio_thinint.c b/drivers/s390/cio/qdio_thinint.c
index 8f315c5..ae50373 100644
--- a/drivers/s390/cio/qdio_thinint.c
+++ b/drivers/s390/cio/qdio_thinint.c
@@ -82,36 +82,16 @@ void tiqdio_remove_device(struct qdio_irq *irq_ptr)
 	INIT_LIST_HEAD(&irq_ptr->entry);
 }
 
-static inline int has_multiple_inq_on_dsci(struct qdio_irq *irq_ptr)
-{
-	return irq_ptr->nr_input_qs > 1;
-}
-
 static inline int references_shared_dsci(struct qdio_irq *irq_ptr)
 {
 	return irq_ptr->dsci == &q_indicators[TIQDIO_SHARED_IND].ind;
 }
 
-static inline int shared_ind(struct qdio_irq *irq_ptr)
-{
-	return references_shared_dsci(irq_ptr) ||
-		has_multiple_inq_on_dsci(irq_ptr);
-}
-
-void clear_nonshared_ind(struct qdio_irq *irq_ptr)
-{
-	if (!is_thinint_irq(irq_ptr))
-		return;
-	if (shared_ind(irq_ptr))
-		return;
-	xchg(irq_ptr->dsci, 0);
-}
-
 int test_nonshared_ind(struct qdio_irq *irq_ptr)
 {
 	if (!is_thinint_irq(irq_ptr))
 		return 0;
-	if (shared_ind(irq_ptr))
+	if (references_shared_dsci(irq_ptr))
 		return 0;
 	if (*irq_ptr->dsci)
 		return 1;
@@ -131,8 +111,7 @@ static inline void tiqdio_call_inq_handlers(struct qdio_irq *irq)
 	struct qdio_q *q;
 	int i;
 
-	if (!references_shared_dsci(irq) &&
-	    has_multiple_inq_on_dsci(irq))
+	if (!references_shared_dsci(irq))
 		xchg(irq->dsci, 0);
 
 	if (irq->irq_poll) {
@@ -145,9 +124,6 @@ static inline void tiqdio_call_inq_handlers(struct qdio_irq *irq)
 	}
 
 	for_each_input_queue(irq, q, i) {
-		if (!shared_ind(irq))
-			xchg(irq->dsci, 0);
-
 		/*
 		 * Call inbound processing but not directly
 		 * since that could starve other thinint queues.
@@ -207,7 +183,7 @@ static int set_subchannel_ind(struct qdio_irq *irq_ptr, int reset)
 	}
 
 	rc = chsc_sadc(irq_ptr->schid, scssc, summary_indicator_addr,
-		       subchannel_indicator_addr);
+		       subchannel_indicator_addr, tiqdio_airq.isc);
 	if (rc) {
 		DBF_ERROR("%4x SSI r:%4x", irq_ptr->schid.sch_no,
 			  scssc->response.code);
diff --git a/drivers/s390/cio/vfio_ccw_drv.c b/drivers/s390/cio/vfio_ccw_drv.c
index e401a3d..339a6bc 100644
--- a/drivers/s390/cio/vfio_ccw_drv.c
+++ b/drivers/s390/cio/vfio_ccw_drv.c
@@ -167,6 +167,11 @@ static int vfio_ccw_sch_probe(struct subchannel *sch)
 	if (ret)
 		goto out_disable;
 
+	if (dev_get_uevent_suppress(&sch->dev)) {
+		dev_set_uevent_suppress(&sch->dev, 0);
+		kobject_uevent(&sch->dev.kobj, KOBJ_ADD);
+	}
+
 	VFIO_CCW_MSG_EVENT(4, "bound to subchannel %x.%x.%04x\n",
 			   sch->schid.cssid, sch->schid.ssid,
 			   sch->schid.sch_no);
diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c
index 5256e3c..3506444 100644
--- a/drivers/s390/crypto/ap_bus.c
+++ b/drivers/s390/crypto/ap_bus.c
@@ -18,13 +18,13 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/err.h>
+#include <linux/freezer.h>
 #include <linux/interrupt.h>
 #include <linux/workqueue.h>
 #include <linux/slab.h>
 #include <linux/notifier.h>
 #include <linux/kthread.h>
 #include <linux/mutex.h>
-#include <linux/suspend.h>
 #include <asm/airq.h>
 #include <linux/atomic.h>
 #include <asm/isc.h>
@@ -103,16 +103,9 @@ static struct hrtimer ap_poll_timer;
  */
 static unsigned long long poll_timeout = 250000;
 
-/* Suspend flag */
-static int ap_suspend_flag;
 /* Maximum domain id */
 static int ap_max_domain_id;
-/*
- * Flag to check if domain was set through module parameter domain=. This is
- * important when supsend and resume is done in a z/VM environment where the
- * domain might change.
- */
-static int user_set_domain;
+
 static struct bus_type ap_bus_type;
 
 /* Adapter interrupt definitions */
@@ -360,7 +353,7 @@ void ap_wait(enum ap_wait wait)
 			wake_up(&ap_poll_wait);
 			break;
 		}
-		/* Fall through */
+		fallthrough;
 	case AP_WAIT_TIMEOUT:
 		spin_lock_bh(&ap_poll_timer_lock);
 		if (!hrtimer_is_queued(&ap_poll_timer)) {
@@ -386,8 +379,6 @@ void ap_request_timeout(struct timer_list *t)
 {
 	struct ap_queue *aq = from_timer(aq, t, timeout);
 
-	if (ap_suspend_flag)
-		return;
 	spin_lock_bh(&aq->lock);
 	ap_wait(ap_sm_event(aq, AP_EVENT_TIMEOUT));
 	spin_unlock_bh(&aq->lock);
@@ -401,8 +392,7 @@ void ap_request_timeout(struct timer_list *t)
  */
 static enum hrtimer_restart ap_poll_timeout(struct hrtimer *unused)
 {
-	if (!ap_suspend_flag)
-		tasklet_schedule(&ap_tasklet);
+	tasklet_schedule(&ap_tasklet);
 	return HRTIMER_NORESTART;
 }
 
@@ -413,8 +403,7 @@ static enum hrtimer_restart ap_poll_timeout(struct hrtimer *unused)
 static void ap_interrupt_handler(struct airq_struct *airq, bool floating)
 {
 	inc_irq_stat(IRQIO_APB);
-	if (!ap_suspend_flag)
-		tasklet_schedule(&ap_tasklet);
+	tasklet_schedule(&ap_tasklet);
 }
 
 /**
@@ -486,7 +475,7 @@ static int ap_poll_thread(void *data)
 	while (!kthread_should_stop()) {
 		add_wait_queue(&ap_poll_wait, &wait);
 		set_current_state(TASK_INTERRUPTIBLE);
-		if (ap_suspend_flag || !ap_pending_requests()) {
+		if (!ap_pending_requests()) {
 			schedule();
 			try_to_freeze();
 		}
@@ -587,51 +576,6 @@ static int ap_uevent(struct device *dev, struct kobj_uevent_env *env)
 	return retval;
 }
 
-static int ap_dev_suspend(struct device *dev)
-{
-	struct ap_device *ap_dev = to_ap_dev(dev);
-
-	if (ap_dev->drv && ap_dev->drv->suspend)
-		ap_dev->drv->suspend(ap_dev);
-	return 0;
-}
-
-static int ap_dev_resume(struct device *dev)
-{
-	struct ap_device *ap_dev = to_ap_dev(dev);
-
-	if (ap_dev->drv && ap_dev->drv->resume)
-		ap_dev->drv->resume(ap_dev);
-	return 0;
-}
-
-static void ap_bus_suspend(void)
-{
-	AP_DBF(DBF_DEBUG, "%s running\n", __func__);
-
-	ap_suspend_flag = 1;
-	/*
-	 * Disable scanning for devices, thus we do not want to scan
-	 * for them after removing.
-	 */
-	flush_work(&ap_scan_work);
-	tasklet_disable(&ap_tasklet);
-}
-
-static int __ap_card_devices_unregister(struct device *dev, void *dummy)
-{
-	if (is_card_dev(dev))
-		device_unregister(dev);
-	return 0;
-}
-
-static int __ap_queue_devices_unregister(struct device *dev, void *dummy)
-{
-	if (is_queue_dev(dev))
-		device_unregister(dev);
-	return 0;
-}
-
 static int __ap_queue_devices_with_id_unregister(struct device *dev, void *data)
 {
 	if (is_queue_dev(dev) &&
@@ -640,67 +584,10 @@ static int __ap_queue_devices_with_id_unregister(struct device *dev, void *data)
 	return 0;
 }
 
-static void ap_bus_resume(void)
-{
-	int rc;
-
-	AP_DBF(DBF_DEBUG, "%s running\n", __func__);
-
-	/* remove all queue devices */
-	bus_for_each_dev(&ap_bus_type, NULL, NULL,
-			 __ap_queue_devices_unregister);
-	/* remove all card devices */
-	bus_for_each_dev(&ap_bus_type, NULL, NULL,
-			 __ap_card_devices_unregister);
-
-	/* Reset thin interrupt setting */
-	if (ap_interrupts_available() && !ap_using_interrupts()) {
-		rc = register_adapter_interrupt(&ap_airq);
-		ap_airq_flag = (rc == 0);
-	}
-	if (!ap_interrupts_available() && ap_using_interrupts()) {
-		unregister_adapter_interrupt(&ap_airq);
-		ap_airq_flag = 0;
-	}
-	/* Reset domain */
-	if (!user_set_domain)
-		ap_domain_index = -1;
-	/* Get things going again */
-	ap_suspend_flag = 0;
-	if (ap_airq_flag)
-		xchg(ap_airq.lsi_ptr, 0);
-	tasklet_enable(&ap_tasklet);
-	queue_work(system_long_wq, &ap_scan_work);
-}
-
-static int ap_power_event(struct notifier_block *this, unsigned long event,
-			  void *ptr)
-{
-	switch (event) {
-	case PM_HIBERNATION_PREPARE:
-	case PM_SUSPEND_PREPARE:
-		ap_bus_suspend();
-		break;
-	case PM_POST_HIBERNATION:
-	case PM_POST_SUSPEND:
-		ap_bus_resume();
-		break;
-	default:
-		break;
-	}
-	return NOTIFY_DONE;
-}
-static struct notifier_block ap_power_notifier = {
-	.notifier_call = ap_power_event,
-};
-
-static SIMPLE_DEV_PM_OPS(ap_bus_pm_ops, ap_dev_suspend, ap_dev_resume);
-
 static struct bus_type ap_bus_type = {
 	.name = "ap",
 	.match = &ap_bus_match,
 	.uevent = &ap_uevent,
-	.pm = &ap_bus_pm_ops,
 };
 
 static int __ap_revise_reserved(struct device *dev, void *dummy)
@@ -873,8 +760,6 @@ EXPORT_SYMBOL(ap_driver_unregister);
 
 void ap_bus_force_rescan(void)
 {
-	if (ap_suspend_flag)
-		return;
 	/* processing a asynchronous bus rescan */
 	del_timer(&ap_config_timer);
 	queue_work(system_long_wq, &ap_scan_work);
@@ -1021,7 +906,7 @@ EXPORT_SYMBOL(ap_parse_mask_str);
 
 static ssize_t ap_domain_show(struct bus_type *bus, char *buf)
 {
-	return snprintf(buf, PAGE_SIZE, "%d\n", ap_domain_index);
+	return scnprintf(buf, PAGE_SIZE, "%d\n", ap_domain_index);
 }
 
 static ssize_t ap_domain_store(struct bus_type *bus,
@@ -1047,14 +932,14 @@ static BUS_ATTR_RW(ap_domain);
 static ssize_t ap_control_domain_mask_show(struct bus_type *bus, char *buf)
 {
 	if (!ap_configuration)	/* QCI not supported */
-		return snprintf(buf, PAGE_SIZE, "not supported\n");
+		return scnprintf(buf, PAGE_SIZE, "not supported\n");
 
-	return snprintf(buf, PAGE_SIZE,
-			"0x%08x%08x%08x%08x%08x%08x%08x%08x\n",
-			ap_configuration->adm[0], ap_configuration->adm[1],
-			ap_configuration->adm[2], ap_configuration->adm[3],
-			ap_configuration->adm[4], ap_configuration->adm[5],
-			ap_configuration->adm[6], ap_configuration->adm[7]);
+	return scnprintf(buf, PAGE_SIZE,
+			 "0x%08x%08x%08x%08x%08x%08x%08x%08x\n",
+			 ap_configuration->adm[0], ap_configuration->adm[1],
+			 ap_configuration->adm[2], ap_configuration->adm[3],
+			 ap_configuration->adm[4], ap_configuration->adm[5],
+			 ap_configuration->adm[6], ap_configuration->adm[7]);
 }
 
 static BUS_ATTR_RO(ap_control_domain_mask);
@@ -1062,14 +947,14 @@ static BUS_ATTR_RO(ap_control_domain_mask);
 static ssize_t ap_usage_domain_mask_show(struct bus_type *bus, char *buf)
 {
 	if (!ap_configuration)	/* QCI not supported */
-		return snprintf(buf, PAGE_SIZE, "not supported\n");
+		return scnprintf(buf, PAGE_SIZE, "not supported\n");
 
-	return snprintf(buf, PAGE_SIZE,
-			"0x%08x%08x%08x%08x%08x%08x%08x%08x\n",
-			ap_configuration->aqm[0], ap_configuration->aqm[1],
-			ap_configuration->aqm[2], ap_configuration->aqm[3],
-			ap_configuration->aqm[4], ap_configuration->aqm[5],
-			ap_configuration->aqm[6], ap_configuration->aqm[7]);
+	return scnprintf(buf, PAGE_SIZE,
+			 "0x%08x%08x%08x%08x%08x%08x%08x%08x\n",
+			 ap_configuration->aqm[0], ap_configuration->aqm[1],
+			 ap_configuration->aqm[2], ap_configuration->aqm[3],
+			 ap_configuration->aqm[4], ap_configuration->aqm[5],
+			 ap_configuration->aqm[6], ap_configuration->aqm[7]);
 }
 
 static BUS_ATTR_RO(ap_usage_domain_mask);
@@ -1077,29 +962,29 @@ static BUS_ATTR_RO(ap_usage_domain_mask);
 static ssize_t ap_adapter_mask_show(struct bus_type *bus, char *buf)
 {
 	if (!ap_configuration)	/* QCI not supported */
-		return snprintf(buf, PAGE_SIZE, "not supported\n");
+		return scnprintf(buf, PAGE_SIZE, "not supported\n");
 
-	return snprintf(buf, PAGE_SIZE,
-			"0x%08x%08x%08x%08x%08x%08x%08x%08x\n",
-			ap_configuration->apm[0], ap_configuration->apm[1],
-			ap_configuration->apm[2], ap_configuration->apm[3],
-			ap_configuration->apm[4], ap_configuration->apm[5],
-			ap_configuration->apm[6], ap_configuration->apm[7]);
+	return scnprintf(buf, PAGE_SIZE,
+			 "0x%08x%08x%08x%08x%08x%08x%08x%08x\n",
+			 ap_configuration->apm[0], ap_configuration->apm[1],
+			 ap_configuration->apm[2], ap_configuration->apm[3],
+			 ap_configuration->apm[4], ap_configuration->apm[5],
+			 ap_configuration->apm[6], ap_configuration->apm[7]);
 }
 
 static BUS_ATTR_RO(ap_adapter_mask);
 
 static ssize_t ap_interrupts_show(struct bus_type *bus, char *buf)
 {
-	return snprintf(buf, PAGE_SIZE, "%d\n",
-			ap_using_interrupts() ? 1 : 0);
+	return scnprintf(buf, PAGE_SIZE, "%d\n",
+			 ap_using_interrupts() ? 1 : 0);
 }
 
 static BUS_ATTR_RO(ap_interrupts);
 
 static ssize_t config_time_show(struct bus_type *bus, char *buf)
 {
-	return snprintf(buf, PAGE_SIZE, "%d\n", ap_config_time);
+	return scnprintf(buf, PAGE_SIZE, "%d\n", ap_config_time);
 }
 
 static ssize_t config_time_store(struct bus_type *bus,
@@ -1118,7 +1003,7 @@ static BUS_ATTR_RW(config_time);
 
 static ssize_t poll_thread_show(struct bus_type *bus, char *buf)
 {
-	return snprintf(buf, PAGE_SIZE, "%d\n", ap_poll_kthread ? 1 : 0);
+	return scnprintf(buf, PAGE_SIZE, "%d\n", ap_poll_kthread ? 1 : 0);
 }
 
 static ssize_t poll_thread_store(struct bus_type *bus,
@@ -1141,7 +1026,7 @@ static BUS_ATTR_RW(poll_thread);
 
 static ssize_t poll_timeout_show(struct bus_type *bus, char *buf)
 {
-	return snprintf(buf, PAGE_SIZE, "%llu\n", poll_timeout);
+	return scnprintf(buf, PAGE_SIZE, "%llu\n", poll_timeout);
 }
 
 static ssize_t poll_timeout_store(struct bus_type *bus, const char *buf,
@@ -1176,7 +1061,7 @@ static ssize_t ap_max_domain_id_show(struct bus_type *bus, char *buf)
 		max_domain_id = ap_max_domain_id ? : -1;
 	else
 		max_domain_id = 15;
-	return snprintf(buf, PAGE_SIZE, "%d\n", max_domain_id);
+	return scnprintf(buf, PAGE_SIZE, "%d\n", max_domain_id);
 }
 
 static BUS_ATTR_RO(ap_max_domain_id);
@@ -1187,10 +1072,10 @@ static ssize_t apmask_show(struct bus_type *bus, char *buf)
 
 	if (mutex_lock_interruptible(&ap_perms_mutex))
 		return -ERESTARTSYS;
-	rc = snprintf(buf, PAGE_SIZE,
-		      "0x%016lx%016lx%016lx%016lx\n",
-		      ap_perms.apm[0], ap_perms.apm[1],
-		      ap_perms.apm[2], ap_perms.apm[3]);
+	rc = scnprintf(buf, PAGE_SIZE,
+		       "0x%016lx%016lx%016lx%016lx\n",
+		       ap_perms.apm[0], ap_perms.apm[1],
+		       ap_perms.apm[2], ap_perms.apm[3]);
 	mutex_unlock(&ap_perms_mutex);
 
 	return rc;
@@ -1218,10 +1103,10 @@ static ssize_t aqmask_show(struct bus_type *bus, char *buf)
 
 	if (mutex_lock_interruptible(&ap_perms_mutex))
 		return -ERESTARTSYS;
-	rc = snprintf(buf, PAGE_SIZE,
-		      "0x%016lx%016lx%016lx%016lx\n",
-		      ap_perms.aqm[0], ap_perms.aqm[1],
-		      ap_perms.aqm[2], ap_perms.aqm[3]);
+	rc = scnprintf(buf, PAGE_SIZE,
+		       "0x%016lx%016lx%016lx%016lx\n",
+		       ap_perms.aqm[0], ap_perms.aqm[1],
+		       ap_perms.aqm[2], ap_perms.aqm[3]);
 	mutex_unlock(&ap_perms_mutex);
 
 	return rc;
@@ -1567,8 +1452,6 @@ static void ap_scan_bus(struct work_struct *unused)
 
 static void ap_config_timeout(struct timer_list *unused)
 {
-	if (ap_suspend_flag)
-		return;
 	queue_work(system_long_wq, &ap_scan_work);
 }
 
@@ -1641,11 +1524,6 @@ static int __init ap_module_init(void)
 			ap_domain_index);
 		ap_domain_index = -1;
 	}
-	/* In resume callback we need to know if the user had set the domain.
-	 * If so, we can not just reset it.
-	 */
-	if (ap_domain_index >= 0)
-		user_set_domain = 1;
 
 	if (ap_interrupts_available()) {
 		rc = register_adapter_interrupt(&ap_airq);
@@ -1688,17 +1566,11 @@ static int __init ap_module_init(void)
 			goto out_work;
 	}
 
-	rc = register_pm_notifier(&ap_power_notifier);
-	if (rc)
-		goto out_pm;
-
 	queue_work(system_long_wq, &ap_scan_work);
 	initialised = true;
 
 	return 0;
 
-out_pm:
-	ap_poll_thread_stop();
 out_work:
 	hrtimer_cancel(&ap_poll_timer);
 	root_device_unregister(ap_root_device);
diff --git a/drivers/s390/crypto/ap_bus.h b/drivers/s390/crypto/ap_bus.h
index 4348fdf..8e8e37b 100644
--- a/drivers/s390/crypto/ap_bus.h
+++ b/drivers/s390/crypto/ap_bus.h
@@ -91,7 +91,6 @@ enum ap_state {
 	AP_STATE_IDLE,
 	AP_STATE_WORKING,
 	AP_STATE_QUEUE_FULL,
-	AP_STATE_SUSPEND_WAIT,
 	AP_STATE_REMOVE,	/* about to be removed from driver */
 	AP_STATE_UNBOUND,	/* momentary not bound to a driver */
 	AP_STATE_BORKED,	/* broken */
@@ -136,8 +135,6 @@ struct ap_driver {
 
 	int (*probe)(struct ap_device *);
 	void (*remove)(struct ap_device *);
-	void (*suspend)(struct ap_device *);
-	void (*resume)(struct ap_device *);
 };
 
 #define to_ap_drv(x) container_of((x), struct ap_driver, driver)
@@ -259,8 +256,6 @@ void ap_queue_init_reply(struct ap_queue *aq, struct ap_message *ap_msg);
 struct ap_queue *ap_queue_create(ap_qid_t qid, int device_type);
 void ap_queue_prepare_remove(struct ap_queue *aq);
 void ap_queue_remove(struct ap_queue *aq);
-void ap_queue_suspend(struct ap_device *ap_dev);
-void ap_queue_resume(struct ap_device *ap_dev);
 void ap_queue_init_state(struct ap_queue *aq);
 
 struct ap_card *ap_card_create(int id, int queue_depth, int raw_device_type,
diff --git a/drivers/s390/crypto/ap_card.c b/drivers/s390/crypto/ap_card.c
index e85bfca..0a39dfd 100644
--- a/drivers/s390/crypto/ap_card.c
+++ b/drivers/s390/crypto/ap_card.c
@@ -23,7 +23,7 @@ static ssize_t hwtype_show(struct device *dev,
 {
 	struct ap_card *ac = to_ap_card(dev);
 
-	return snprintf(buf, PAGE_SIZE, "%d\n", ac->ap_dev.device_type);
+	return scnprintf(buf, PAGE_SIZE, "%d\n", ac->ap_dev.device_type);
 }
 
 static DEVICE_ATTR_RO(hwtype);
@@ -33,7 +33,7 @@ static ssize_t raw_hwtype_show(struct device *dev,
 {
 	struct ap_card *ac = to_ap_card(dev);
 
-	return snprintf(buf, PAGE_SIZE, "%d\n", ac->raw_hwtype);
+	return scnprintf(buf, PAGE_SIZE, "%d\n", ac->raw_hwtype);
 }
 
 static DEVICE_ATTR_RO(raw_hwtype);
@@ -43,7 +43,7 @@ static ssize_t depth_show(struct device *dev, struct device_attribute *attr,
 {
 	struct ap_card *ac = to_ap_card(dev);
 
-	return snprintf(buf, PAGE_SIZE, "%d\n", ac->queue_depth);
+	return scnprintf(buf, PAGE_SIZE, "%d\n", ac->queue_depth);
 }
 
 static DEVICE_ATTR_RO(depth);
@@ -53,7 +53,7 @@ static ssize_t ap_functions_show(struct device *dev,
 {
 	struct ap_card *ac = to_ap_card(dev);
 
-	return snprintf(buf, PAGE_SIZE, "0x%08X\n", ac->functions);
+	return scnprintf(buf, PAGE_SIZE, "0x%08X\n", ac->functions);
 }
 
 static DEVICE_ATTR_RO(ap_functions);
@@ -69,7 +69,7 @@ static ssize_t request_count_show(struct device *dev,
 	spin_lock_bh(&ap_list_lock);
 	req_cnt = atomic64_read(&ac->total_request_count);
 	spin_unlock_bh(&ap_list_lock);
-	return snprintf(buf, PAGE_SIZE, "%llu\n", req_cnt);
+	return scnprintf(buf, PAGE_SIZE, "%llu\n", req_cnt);
 }
 
 static ssize_t request_count_store(struct device *dev,
@@ -102,7 +102,7 @@ static ssize_t requestq_count_show(struct device *dev,
 	for_each_ap_queue(aq, ac)
 		reqq_cnt += aq->requestq_count;
 	spin_unlock_bh(&ap_list_lock);
-	return snprintf(buf, PAGE_SIZE, "%d\n", reqq_cnt);
+	return scnprintf(buf, PAGE_SIZE, "%d\n", reqq_cnt);
 }
 
 static DEVICE_ATTR_RO(requestq_count);
@@ -119,7 +119,7 @@ static ssize_t pendingq_count_show(struct device *dev,
 	for_each_ap_queue(aq, ac)
 		penq_cnt += aq->pendingq_count;
 	spin_unlock_bh(&ap_list_lock);
-	return snprintf(buf, PAGE_SIZE, "%d\n", penq_cnt);
+	return scnprintf(buf, PAGE_SIZE, "%d\n", penq_cnt);
 }
 
 static DEVICE_ATTR_RO(pendingq_count);
@@ -127,7 +127,8 @@ static DEVICE_ATTR_RO(pendingq_count);
 static ssize_t modalias_show(struct device *dev,
 			     struct device_attribute *attr, char *buf)
 {
-	return sprintf(buf, "ap:t%02X\n", to_ap_dev(dev)->device_type);
+	return scnprintf(buf, PAGE_SIZE, "ap:t%02X\n",
+			 to_ap_dev(dev)->device_type);
 }
 
 static DEVICE_ATTR_RO(modalias);
diff --git a/drivers/s390/crypto/ap_queue.c b/drivers/s390/crypto/ap_queue.c
index a317ab4..0eaf1d0 100644
--- a/drivers/s390/crypto/ap_queue.c
+++ b/drivers/s390/crypto/ap_queue.c
@@ -152,7 +152,7 @@ static struct ap_queue_status ap_sm_recv(struct ap_queue *aq)
 			ap_msg->receive(aq, ap_msg, aq->reply);
 			break;
 		}
-		/* fall through */
+		fallthrough;
 	case AP_RESPONSE_NO_PENDING_REPLY:
 		if (!status.queue_empty || aq->queue_count <= 0)
 			break;
@@ -201,31 +201,6 @@ static enum ap_wait ap_sm_read(struct ap_queue *aq)
 }
 
 /**
- * ap_sm_suspend_read(): Receive pending reply messages from an AP queue
- * without changing the device state in between. In suspend mode we don't
- * allow sending new requests, therefore just fetch pending replies.
- * @aq: pointer to the AP queue
- *
- * Returns AP_WAIT_NONE or AP_WAIT_AGAIN
- */
-static enum ap_wait ap_sm_suspend_read(struct ap_queue *aq)
-{
-	struct ap_queue_status status;
-
-	if (!aq->reply)
-		return AP_WAIT_NONE;
-	status = ap_sm_recv(aq);
-	switch (status.response_code) {
-	case AP_RESPONSE_NORMAL:
-		if (aq->queue_count > 0)
-			return AP_WAIT_AGAIN;
-		/* fall through */
-	default:
-		return AP_WAIT_NONE;
-	}
-}
-
-/**
  * ap_sm_write(): Send messages from the request queue to an AP queue.
  * @aq: pointer to the AP queue
  *
@@ -254,7 +229,7 @@ static enum ap_wait ap_sm_write(struct ap_queue *aq)
 			aq->state = AP_STATE_WORKING;
 			return AP_WAIT_AGAIN;
 		}
-		/* fall through */
+		fallthrough;
 	case AP_RESPONSE_Q_FULL:
 		aq->state = AP_STATE_QUEUE_FULL;
 		return AP_WAIT_INTERRUPT;
@@ -380,7 +355,7 @@ static enum ap_wait ap_sm_setirq_wait(struct ap_queue *aq)
 	case AP_RESPONSE_NORMAL:
 		if (aq->queue_count > 0)
 			return AP_WAIT_AGAIN;
-		/* fallthrough */
+		fallthrough;
 	case AP_RESPONSE_NO_PENDING_REPLY:
 		return AP_WAIT_TIMEOUT;
 	default:
@@ -417,10 +392,6 @@ static ap_func_t *ap_jumptable[NR_AP_STATES][NR_AP_EVENTS] = {
 		[AP_EVENT_POLL] = ap_sm_read,
 		[AP_EVENT_TIMEOUT] = ap_sm_reset,
 	},
-	[AP_STATE_SUSPEND_WAIT] = {
-		[AP_EVENT_POLL] = ap_sm_suspend_read,
-		[AP_EVENT_TIMEOUT] = ap_sm_nop,
-	},
 	[AP_STATE_REMOVE] = {
 		[AP_EVENT_POLL] = ap_sm_nop,
 		[AP_EVENT_TIMEOUT] = ap_sm_nop,
@@ -450,28 +421,6 @@ enum ap_wait ap_sm_event_loop(struct ap_queue *aq, enum ap_event event)
 }
 
 /*
- * Power management for queue devices
- */
-void ap_queue_suspend(struct ap_device *ap_dev)
-{
-	struct ap_queue *aq = to_ap_queue(&ap_dev->device);
-
-	/* Poll on the device until all requests are finished. */
-	spin_lock_bh(&aq->lock);
-	aq->state = AP_STATE_SUSPEND_WAIT;
-	while (ap_sm_event(aq, AP_EVENT_POLL) != AP_WAIT_NONE)
-		;
-	aq->state = AP_STATE_BORKED;
-	spin_unlock_bh(&aq->lock);
-}
-EXPORT_SYMBOL(ap_queue_suspend);
-
-void ap_queue_resume(struct ap_device *ap_dev)
-{
-}
-EXPORT_SYMBOL(ap_queue_resume);
-
-/*
  * AP queue related attributes.
  */
 static ssize_t request_count_show(struct device *dev,
@@ -484,7 +433,7 @@ static ssize_t request_count_show(struct device *dev,
 	spin_lock_bh(&aq->lock);
 	req_cnt = aq->total_request_count;
 	spin_unlock_bh(&aq->lock);
-	return snprintf(buf, PAGE_SIZE, "%llu\n", req_cnt);
+	return scnprintf(buf, PAGE_SIZE, "%llu\n", req_cnt);
 }
 
 static ssize_t request_count_store(struct device *dev,
@@ -511,7 +460,7 @@ static ssize_t requestq_count_show(struct device *dev,
 	spin_lock_bh(&aq->lock);
 	reqq_cnt = aq->requestq_count;
 	spin_unlock_bh(&aq->lock);
-	return snprintf(buf, PAGE_SIZE, "%d\n", reqq_cnt);
+	return scnprintf(buf, PAGE_SIZE, "%d\n", reqq_cnt);
 }
 
 static DEVICE_ATTR_RO(requestq_count);
@@ -525,7 +474,7 @@ static ssize_t pendingq_count_show(struct device *dev,
 	spin_lock_bh(&aq->lock);
 	penq_cnt = aq->pendingq_count;
 	spin_unlock_bh(&aq->lock);
-	return snprintf(buf, PAGE_SIZE, "%d\n", penq_cnt);
+	return scnprintf(buf, PAGE_SIZE, "%d\n", penq_cnt);
 }
 
 static DEVICE_ATTR_RO(pendingq_count);
@@ -540,14 +489,14 @@ static ssize_t reset_show(struct device *dev,
 	switch (aq->state) {
 	case AP_STATE_RESET_START:
 	case AP_STATE_RESET_WAIT:
-		rc = snprintf(buf, PAGE_SIZE, "Reset in progress.\n");
+		rc = scnprintf(buf, PAGE_SIZE, "Reset in progress.\n");
 		break;
 	case AP_STATE_WORKING:
 	case AP_STATE_QUEUE_FULL:
-		rc = snprintf(buf, PAGE_SIZE, "Reset Timer armed.\n");
+		rc = scnprintf(buf, PAGE_SIZE, "Reset Timer armed.\n");
 		break;
 	default:
-		rc = snprintf(buf, PAGE_SIZE, "No Reset Timer set.\n");
+		rc = scnprintf(buf, PAGE_SIZE, "No Reset Timer set.\n");
 	}
 	spin_unlock_bh(&aq->lock);
 	return rc;
@@ -581,11 +530,11 @@ static ssize_t interrupt_show(struct device *dev,
 
 	spin_lock_bh(&aq->lock);
 	if (aq->state == AP_STATE_SETIRQ_WAIT)
-		rc = snprintf(buf, PAGE_SIZE, "Enable Interrupt pending.\n");
+		rc = scnprintf(buf, PAGE_SIZE, "Enable Interrupt pending.\n");
 	else if (aq->interrupt == AP_INTR_ENABLED)
-		rc = snprintf(buf, PAGE_SIZE, "Interrupts enabled.\n");
+		rc = scnprintf(buf, PAGE_SIZE, "Interrupts enabled.\n");
 	else
-		rc = snprintf(buf, PAGE_SIZE, "Interrupts disabled.\n");
+		rc = scnprintf(buf, PAGE_SIZE, "Interrupts disabled.\n");
 	spin_unlock_bh(&aq->lock);
 	return rc;
 }
diff --git a/drivers/s390/crypto/pkey_api.c b/drivers/s390/crypto/pkey_api.c
index 2f33c5f..74e63ec 100644
--- a/drivers/s390/crypto/pkey_api.c
+++ b/drivers/s390/crypto/pkey_api.c
@@ -80,7 +80,7 @@ struct clearaeskeytoken {
 	u8  res1[3];
 	u32 keytype;	 /* key type, one of the PKEY_KEYTYPE values */
 	u32 len;	 /* bytes actually stored in clearkey[] */
-	u8  clearkey[0]; /* clear key value */
+	u8  clearkey[]; /* clear key value */
 } __packed;
 
 /*
diff --git a/drivers/s390/crypto/vfio_ap_ops.c b/drivers/s390/crypto/vfio_ap_ops.c
index 5c0f53c..e0bde85 100644
--- a/drivers/s390/crypto/vfio_ap_ops.c
+++ b/drivers/s390/crypto/vfio_ap_ops.c
@@ -90,7 +90,7 @@ static void vfio_ap_wait_for_irqclear(int apqn)
 		case AP_RESPONSE_RESET_IN_PROGRESS:
 			if (!status.irq_enabled)
 				return;
-			/* Fall through */
+			fallthrough;
 		case AP_RESPONSE_BUSY:
 			msleep(20);
 			break;
diff --git a/drivers/s390/crypto/zcrypt_card.c b/drivers/s390/crypto/zcrypt_card.c
index d4f35a1..c53cab4 100644
--- a/drivers/s390/crypto/zcrypt_card.c
+++ b/drivers/s390/crypto/zcrypt_card.c
@@ -41,7 +41,7 @@ static ssize_t type_show(struct device *dev,
 {
 	struct zcrypt_card *zc = to_ap_card(dev)->private;
 
-	return snprintf(buf, PAGE_SIZE, "%s\n", zc->type_string);
+	return scnprintf(buf, PAGE_SIZE, "%s\n", zc->type_string);
 }
 
 static DEVICE_ATTR_RO(type);
@@ -52,7 +52,7 @@ static ssize_t online_show(struct device *dev,
 {
 	struct zcrypt_card *zc = to_ap_card(dev)->private;
 
-	return snprintf(buf, PAGE_SIZE, "%d\n", zc->online);
+	return scnprintf(buf, PAGE_SIZE, "%d\n", zc->online);
 }
 
 static ssize_t online_store(struct device *dev,
@@ -86,7 +86,7 @@ static ssize_t load_show(struct device *dev,
 {
 	struct zcrypt_card *zc = to_ap_card(dev)->private;
 
-	return snprintf(buf, PAGE_SIZE, "%d\n", atomic_read(&zc->load));
+	return scnprintf(buf, PAGE_SIZE, "%d\n", atomic_read(&zc->load));
 }
 
 static DEVICE_ATTR_RO(load);
diff --git a/drivers/s390/crypto/zcrypt_ccamisc.c b/drivers/s390/crypto/zcrypt_ccamisc.c
index 110fe9d..1b83539 100644
--- a/drivers/s390/crypto/zcrypt_ccamisc.c
+++ b/drivers/s390/crypto/zcrypt_ccamisc.c
@@ -592,7 +592,7 @@ int cca_sec2protkey(u16 cardnr, u16 domain,
 				u8  pad2[1];
 				u8  vptype;
 				u8  vp[32];  /* verification pattern */
-			} keyblock;
+			} ckb;
 		} lv3;
 	} __packed * prepparm;
 
@@ -650,15 +650,16 @@ int cca_sec2protkey(u16 cardnr, u16 domain,
 	prepparm = (struct uskrepparm *) prepcblk->rpl_parmb;
 
 	/* check the returned keyblock */
-	if (prepparm->lv3.keyblock.version != 0x01) {
-		DEBUG_ERR("%s reply param keyblock version mismatch 0x%02x != 0x01\n",
-			  __func__, (int) prepparm->lv3.keyblock.version);
+	if (prepparm->lv3.ckb.version != 0x01 &&
+	    prepparm->lv3.ckb.version != 0x02) {
+		DEBUG_ERR("%s reply param keyblock version mismatch 0x%02x\n",
+			  __func__, (int) prepparm->lv3.ckb.version);
 		rc = -EIO;
 		goto out;
 	}
 
 	/* copy the tanslated protected key */
-	switch (prepparm->lv3.keyblock.len) {
+	switch (prepparm->lv3.ckb.len) {
 	case 16+32:
 		/* AES 128 protected key */
 		if (protkeytype)
@@ -676,13 +677,13 @@ int cca_sec2protkey(u16 cardnr, u16 domain,
 		break;
 	default:
 		DEBUG_ERR("%s unknown/unsupported keylen %d\n",
-			  __func__, prepparm->lv3.keyblock.len);
+			  __func__, prepparm->lv3.ckb.len);
 		rc = -EIO;
 		goto out;
 	}
-	memcpy(protkey, prepparm->lv3.keyblock.key, prepparm->lv3.keyblock.len);
+	memcpy(protkey, prepparm->lv3.ckb.key, prepparm->lv3.ckb.len);
 	if (protkeylen)
-		*protkeylen = prepparm->lv3.keyblock.len;
+		*protkeylen = prepparm->lv3.ckb.len;
 
 out:
 	free_cprbmem(mem, PARMBSIZE, 0);
@@ -1260,10 +1261,10 @@ int cca_cipher2protkey(u16 cardnr, u16 domain, const u8 *ckey,
 	prepparm = (struct aurepparm *) prepcblk->rpl_parmb;
 
 	/* check the returned keyblock */
-	if (prepparm->vud.ckb.version != 0x01) {
-		DEBUG_ERR(
-			"%s reply param keyblock version mismatch 0x%02x != 0x01\n",
-			__func__, (int) prepparm->vud.ckb.version);
+	if (prepparm->vud.ckb.version != 0x01 &&
+	    prepparm->vud.ckb.version != 0x02) {
+		DEBUG_ERR("%s reply param keyblock version mismatch 0x%02x\n",
+			  __func__, (int) prepparm->vud.ckb.version);
 		rc = -EIO;
 		goto out;
 	}
@@ -1568,9 +1569,9 @@ static int findcard(u64 mkvp, u16 *pcardnr, u16 *pdomain,
 		return -EINVAL;
 
 	/* fetch status of all crypto cards */
-	device_status = kmalloc_array(MAX_ZDEV_ENTRIES_EXT,
-				      sizeof(struct zcrypt_device_status_ext),
-				      GFP_KERNEL);
+	device_status = kvmalloc_array(MAX_ZDEV_ENTRIES_EXT,
+				       sizeof(struct zcrypt_device_status_ext),
+				       GFP_KERNEL);
 	if (!device_status)
 		return -ENOMEM;
 	zcrypt_device_status_mask_ext(device_status);
@@ -1640,7 +1641,7 @@ static int findcard(u64 mkvp, u16 *pcardnr, u16 *pdomain,
 	} else
 		rc = -ENODEV;
 
-	kfree(device_status);
+	kvfree(device_status);
 	return rc;
 }
 
diff --git a/drivers/s390/crypto/zcrypt_ccamisc.h b/drivers/s390/crypto/zcrypt_ccamisc.h
index 3a9876d..8b7a641 100644
--- a/drivers/s390/crypto/zcrypt_ccamisc.h
+++ b/drivers/s390/crypto/zcrypt_ccamisc.h
@@ -90,7 +90,7 @@ struct cipherkeytoken {
 	u16 kmf1;     /* key management field 1 */
 	u16 kmf2;     /* key management field 2 */
 	u16 kmf3;     /* key management field 3 */
-	u8  vdata[0]; /* variable part data follows */
+	u8  vdata[]; /* variable part data follows */
 } __packed;
 
 /* Some defines for the CCA AES cipherkeytoken kmf1 field */
diff --git a/drivers/s390/crypto/zcrypt_cex2a.c b/drivers/s390/crypto/zcrypt_cex2a.c
index 7cbb384..b447f3e 100644
--- a/drivers/s390/crypto/zcrypt_cex2a.c
+++ b/drivers/s390/crypto/zcrypt_cex2a.c
@@ -204,8 +204,6 @@ static void zcrypt_cex2a_queue_remove(struct ap_device *ap_dev)
 static struct ap_driver zcrypt_cex2a_queue_driver = {
 	.probe = zcrypt_cex2a_queue_probe,
 	.remove = zcrypt_cex2a_queue_remove,
-	.suspend = ap_queue_suspend,
-	.resume = ap_queue_resume,
 	.ids = zcrypt_cex2a_queue_ids,
 	.flags = AP_DRIVER_FLAG_DEFAULT,
 };
diff --git a/drivers/s390/crypto/zcrypt_cex2c.c b/drivers/s390/crypto/zcrypt_cex2c.c
index c78c0d1..2664401 100644
--- a/drivers/s390/crypto/zcrypt_cex2c.c
+++ b/drivers/s390/crypto/zcrypt_cex2c.c
@@ -260,8 +260,6 @@ static void zcrypt_cex2c_queue_remove(struct ap_device *ap_dev)
 static struct ap_driver zcrypt_cex2c_queue_driver = {
 	.probe = zcrypt_cex2c_queue_probe,
 	.remove = zcrypt_cex2c_queue_remove,
-	.suspend = ap_queue_suspend,
-	.resume = ap_queue_resume,
 	.ids = zcrypt_cex2c_queue_ids,
 	.flags = AP_DRIVER_FLAG_DEFAULT,
 };
diff --git a/drivers/s390/crypto/zcrypt_cex4.c b/drivers/s390/crypto/zcrypt_cex4.c
index 9a9d02e..cdaa834 100644
--- a/drivers/s390/crypto/zcrypt_cex4.c
+++ b/drivers/s390/crypto/zcrypt_cex4.c
@@ -87,7 +87,7 @@ static ssize_t cca_serialnr_show(struct device *dev,
 	if (ap_domain_index >= 0)
 		cca_get_info(ac->id, ap_domain_index, &ci, zc->online);
 
-	return snprintf(buf, PAGE_SIZE, "%s\n", ci.serial);
+	return scnprintf(buf, PAGE_SIZE, "%s\n", ci.serial);
 }
 
 static struct device_attribute dev_attr_cca_serialnr =
@@ -122,22 +122,24 @@ static ssize_t cca_mkvps_show(struct device *dev,
 		     &ci, zq->online);
 
 	if (ci.new_mk_state >= '1' && ci.new_mk_state <= '3')
-		n = snprintf(buf, PAGE_SIZE, "AES NEW: %s 0x%016llx\n",
-			     new_state[ci.new_mk_state - '1'], ci.new_mkvp);
+		n = scnprintf(buf, PAGE_SIZE, "AES NEW: %s 0x%016llx\n",
+			      new_state[ci.new_mk_state - '1'], ci.new_mkvp);
 	else
-		n = snprintf(buf, PAGE_SIZE, "AES NEW: - -\n");
+		n = scnprintf(buf, PAGE_SIZE, "AES NEW: - -\n");
 
 	if (ci.cur_mk_state >= '1' && ci.cur_mk_state <= '2')
-		n += snprintf(buf + n, PAGE_SIZE - n, "AES CUR: %s 0x%016llx\n",
-			      cao_state[ci.cur_mk_state - '1'], ci.cur_mkvp);
+		n += scnprintf(buf + n, PAGE_SIZE - n,
+			       "AES CUR: %s 0x%016llx\n",
+			       cao_state[ci.cur_mk_state - '1'], ci.cur_mkvp);
 	else
-		n += snprintf(buf + n, PAGE_SIZE - n, "AES CUR: - -\n");
+		n += scnprintf(buf + n, PAGE_SIZE - n, "AES CUR: - -\n");
 
 	if (ci.old_mk_state >= '1' && ci.old_mk_state <= '2')
-		n += snprintf(buf + n, PAGE_SIZE - n, "AES OLD: %s 0x%016llx\n",
-			      cao_state[ci.old_mk_state - '1'], ci.old_mkvp);
+		n += scnprintf(buf + n, PAGE_SIZE - n,
+			       "AES OLD: %s 0x%016llx\n",
+			       cao_state[ci.old_mk_state - '1'], ci.old_mkvp);
 	else
-		n += snprintf(buf + n, PAGE_SIZE - n, "AES OLD: - -\n");
+		n += scnprintf(buf + n, PAGE_SIZE - n, "AES OLD: - -\n");
 
 	return n;
 }
@@ -170,9 +172,9 @@ static ssize_t ep11_api_ordinalnr_show(struct device *dev,
 	ep11_get_card_info(ac->id, &ci, zc->online);
 
 	if (ci.API_ord_nr > 0)
-		return snprintf(buf, PAGE_SIZE, "%u\n", ci.API_ord_nr);
+		return scnprintf(buf, PAGE_SIZE, "%u\n", ci.API_ord_nr);
 	else
-		return snprintf(buf, PAGE_SIZE, "\n");
+		return scnprintf(buf, PAGE_SIZE, "\n");
 }
 
 static struct device_attribute dev_attr_ep11_api_ordinalnr =
@@ -191,11 +193,11 @@ static ssize_t ep11_fw_version_show(struct device *dev,
 	ep11_get_card_info(ac->id, &ci, zc->online);
 
 	if (ci.FW_version > 0)
-		return snprintf(buf, PAGE_SIZE, "%d.%d\n",
-				(int)(ci.FW_version >> 8),
-				(int)(ci.FW_version & 0xFF));
+		return scnprintf(buf, PAGE_SIZE, "%d.%d\n",
+				 (int)(ci.FW_version >> 8),
+				 (int)(ci.FW_version & 0xFF));
 	else
-		return snprintf(buf, PAGE_SIZE, "\n");
+		return scnprintf(buf, PAGE_SIZE, "\n");
 }
 
 static struct device_attribute dev_attr_ep11_fw_version =
@@ -214,9 +216,9 @@ static ssize_t ep11_serialnr_show(struct device *dev,
 	ep11_get_card_info(ac->id, &ci, zc->online);
 
 	if (ci.serial[0])
-		return snprintf(buf, PAGE_SIZE, "%16.16s\n", ci.serial);
+		return scnprintf(buf, PAGE_SIZE, "%16.16s\n", ci.serial);
 	else
-		return snprintf(buf, PAGE_SIZE, "\n");
+		return scnprintf(buf, PAGE_SIZE, "\n");
 }
 
 static struct device_attribute dev_attr_ep11_serialnr =
@@ -251,11 +253,11 @@ static ssize_t ep11_card_op_modes_show(struct device *dev,
 		if (ci.op_mode & (1 << ep11_op_modes[i].mode_bit)) {
 			if (n > 0)
 				buf[n++] = ' ';
-			n += snprintf(buf + n, PAGE_SIZE - n,
-				      "%s", ep11_op_modes[i].mode_txt);
+			n += scnprintf(buf + n, PAGE_SIZE - n,
+				       "%s", ep11_op_modes[i].mode_txt);
 		}
 	}
-	n += snprintf(buf + n, PAGE_SIZE - n, "\n");
+	n += scnprintf(buf + n, PAGE_SIZE - n, "\n");
 
 	return n;
 }
@@ -298,28 +300,28 @@ static ssize_t ep11_mkvps_show(struct device *dev,
 				     &di);
 
 	if (di.cur_wk_state == '0') {
-		n = snprintf(buf, PAGE_SIZE, "WK CUR: %s -\n",
-			     cwk_state[di.cur_wk_state - '0']);
+		n = scnprintf(buf, PAGE_SIZE, "WK CUR: %s -\n",
+			      cwk_state[di.cur_wk_state - '0']);
 	} else if (di.cur_wk_state == '1') {
-		n = snprintf(buf, PAGE_SIZE, "WK CUR: %s 0x",
-			     cwk_state[di.cur_wk_state - '0']);
+		n = scnprintf(buf, PAGE_SIZE, "WK CUR: %s 0x",
+			      cwk_state[di.cur_wk_state - '0']);
 		bin2hex(buf + n, di.cur_wkvp, sizeof(di.cur_wkvp));
 		n += 2 * sizeof(di.cur_wkvp);
-		n += snprintf(buf + n, PAGE_SIZE - n, "\n");
+		n += scnprintf(buf + n, PAGE_SIZE - n, "\n");
 	} else
-		n = snprintf(buf, PAGE_SIZE, "WK CUR: - -\n");
+		n = scnprintf(buf, PAGE_SIZE, "WK CUR: - -\n");
 
 	if (di.new_wk_state == '0') {
-		n += snprintf(buf + n, PAGE_SIZE - n, "WK NEW: %s -\n",
-			      nwk_state[di.new_wk_state - '0']);
+		n += scnprintf(buf + n, PAGE_SIZE - n, "WK NEW: %s -\n",
+			       nwk_state[di.new_wk_state - '0']);
 	} else if (di.new_wk_state >= '1' && di.new_wk_state <= '2') {
-		n += snprintf(buf + n, PAGE_SIZE - n, "WK NEW: %s 0x",
-			      nwk_state[di.new_wk_state - '0']);
+		n += scnprintf(buf + n, PAGE_SIZE - n, "WK NEW: %s 0x",
+			       nwk_state[di.new_wk_state - '0']);
 		bin2hex(buf + n, di.new_wkvp, sizeof(di.new_wkvp));
 		n += 2 * sizeof(di.new_wkvp);
-		n += snprintf(buf + n, PAGE_SIZE - n, "\n");
+		n += scnprintf(buf + n, PAGE_SIZE - n, "\n");
 	} else
-		n += snprintf(buf + n, PAGE_SIZE - n, "WK NEW: - -\n");
+		n += scnprintf(buf + n, PAGE_SIZE - n, "WK NEW: - -\n");
 
 	return n;
 }
@@ -346,11 +348,11 @@ static ssize_t ep11_queue_op_modes_show(struct device *dev,
 		if (di.op_mode & (1 << ep11_op_modes[i].mode_bit)) {
 			if (n > 0)
 				buf[n++] = ' ';
-			n += snprintf(buf + n, PAGE_SIZE - n,
-				      "%s", ep11_op_modes[i].mode_txt);
+			n += scnprintf(buf + n, PAGE_SIZE - n,
+				       "%s", ep11_op_modes[i].mode_txt);
 		}
 	}
-	n += snprintf(buf + n, PAGE_SIZE - n, "\n");
+	n += scnprintf(buf + n, PAGE_SIZE - n, "\n");
 
 	return n;
 }
@@ -654,8 +656,6 @@ static void zcrypt_cex4_queue_remove(struct ap_device *ap_dev)
 static struct ap_driver zcrypt_cex4_queue_driver = {
 	.probe = zcrypt_cex4_queue_probe,
 	.remove = zcrypt_cex4_queue_remove,
-	.suspend = ap_queue_suspend,
-	.resume = ap_queue_resume,
 	.ids = zcrypt_cex4_queue_ids,
 	.flags = AP_DRIVER_FLAG_DEFAULT,
 };
diff --git a/drivers/s390/crypto/zcrypt_ep11misc.c b/drivers/s390/crypto/zcrypt_ep11misc.c
index 2afe215..004ce02 100644
--- a/drivers/s390/crypto/zcrypt_ep11misc.c
+++ b/drivers/s390/crypto/zcrypt_ep11misc.c
@@ -1217,9 +1217,9 @@ int ep11_findcard2(u32 **apqns, u32 *nr_apqns, u16 cardnr, u16 domain,
 	struct ep11_card_info eci;
 
 	/* fetch status of all crypto cards */
-	device_status = kmalloc_array(MAX_ZDEV_ENTRIES_EXT,
-				      sizeof(struct zcrypt_device_status_ext),
-				      GFP_KERNEL);
+	device_status = kvmalloc_array(MAX_ZDEV_ENTRIES_EXT,
+				       sizeof(struct zcrypt_device_status_ext),
+				       GFP_KERNEL);
 	if (!device_status)
 		return -ENOMEM;
 	zcrypt_device_status_mask_ext(device_status);
@@ -1227,7 +1227,7 @@ int ep11_findcard2(u32 **apqns, u32 *nr_apqns, u16 cardnr, u16 domain,
 	/* allocate 1k space for up to 256 apqns */
 	_apqns = kmalloc_array(256, sizeof(u32), GFP_KERNEL);
 	if (!_apqns) {
-		kfree(device_status);
+		kvfree(device_status);
 		return -ENOMEM;
 	}
 
@@ -1282,7 +1282,7 @@ int ep11_findcard2(u32 **apqns, u32 *nr_apqns, u16 cardnr, u16 domain,
 		rc = 0;
 	}
 
-	kfree(device_status);
+	kvfree(device_status);
 	return rc;
 }
 EXPORT_SYMBOL(ep11_findcard2);
diff --git a/drivers/s390/crypto/zcrypt_msgtype6.c b/drivers/s390/crypto/zcrypt_msgtype6.c
index a36251d..fd1cbb2 100644
--- a/drivers/s390/crypto/zcrypt_msgtype6.c
+++ b/drivers/s390/crypto/zcrypt_msgtype6.c
@@ -590,7 +590,7 @@ struct type86x_reply {
 	struct CPRBX cprbx;
 	unsigned char pad[4];	/* 4 byte function code/rules block ? */
 	unsigned short length;
-	char text[0];
+	char text[];
 } __packed;
 
 struct type86_ep11_reply {
@@ -801,7 +801,7 @@ static int convert_response_ica(struct zcrypt_queue *zq,
 		if (msg->cprbx.cprb_ver_id == 0x02)
 			return convert_type86_ica(zq, reply,
 						  outputdata, outputdatalength);
-		/* fall through - wrong cprb version is an unknown response */
+		fallthrough;	/* wrong cprb version is an unknown response */
 	default: /* Unknown response type, this should NEVER EVER happen */
 		zq->online = 0;
 		pr_err("Cryptographic device %02x.%04x failed and was set offline\n",
@@ -834,7 +834,7 @@ static int convert_response_xcrb(struct zcrypt_queue *zq,
 		}
 		if (msg->cprbx.cprb_ver_id == 0x02)
 			return convert_type86_xcrb(zq, reply, xcRB);
-		/* fall through - wrong cprb version is an unknown response */
+		fallthrough;	/* wrong cprb version is an unknown response */
 	default: /* Unknown response type, this should NEVER EVER happen */
 		xcRB->status = 0x0008044DL; /* HDD_InvalidParm */
 		zq->online = 0;
@@ -864,7 +864,7 @@ static int convert_response_ep11_xcrb(struct zcrypt_queue *zq,
 			return convert_error(zq, reply);
 		if (msg->cprbx.cprb_ver_id == 0x04)
 			return convert_type86_ep11_xcrb(zq, reply, xcRB);
-		/* fall through - wrong cprb version is an unknown resp */
+		fallthrough;	/* wrong cprb version is an unknown resp */
 	default: /* Unknown response type, this should NEVER EVER happen */
 		zq->online = 0;
 		pr_err("Cryptographic device %02x.%04x failed and was set offline\n",
@@ -894,7 +894,7 @@ static int convert_response_rng(struct zcrypt_queue *zq,
 			return -EINVAL;
 		if (msg->cprbx.cprb_ver_id == 0x02)
 			return convert_type86_rng(zq, reply, data);
-		/* fall through - wrong cprb version is an unknown response */
+		fallthrough;	/* wrong cprb version is an unknown response */
 	default: /* Unknown response type, this should NEVER EVER happen */
 		zq->online = 0;
 		pr_err("Cryptographic device %02x.%04x failed and was set offline\n",
diff --git a/drivers/s390/crypto/zcrypt_queue.c b/drivers/s390/crypto/zcrypt_queue.c
index 522c4bc..b7d9fa5 100644
--- a/drivers/s390/crypto/zcrypt_queue.c
+++ b/drivers/s390/crypto/zcrypt_queue.c
@@ -42,7 +42,7 @@ static ssize_t online_show(struct device *dev,
 {
 	struct zcrypt_queue *zq = to_ap_queue(dev)->private;
 
-	return snprintf(buf, PAGE_SIZE, "%d\n", zq->online);
+	return scnprintf(buf, PAGE_SIZE, "%d\n", zq->online);
 }
 
 static ssize_t online_store(struct device *dev,
@@ -78,7 +78,7 @@ static ssize_t load_show(struct device *dev,
 {
 	struct zcrypt_queue *zq = to_ap_queue(dev)->private;
 
-	return snprintf(buf, PAGE_SIZE, "%d\n", atomic_read(&zq->load));
+	return scnprintf(buf, PAGE_SIZE, "%d\n", atomic_read(&zq->load));
 }
 
 static DEVICE_ATTR_RO(load);
diff --git a/drivers/s390/net/ism_drv.c b/drivers/s390/net/ism_drv.c
index 4fc2056..c75112e 100644
--- a/drivers/s390/net/ism_drv.c
+++ b/drivers/s390/net/ism_drv.c
@@ -567,31 +567,11 @@ static void ism_remove(struct pci_dev *pdev)
 	kfree(ism);
 }
 
-static int ism_suspend(struct device *dev)
-{
-	struct ism_dev *ism = dev_get_drvdata(dev);
-
-	ism_dev_exit(ism);
-	return 0;
-}
-
-static int ism_resume(struct device *dev)
-{
-	struct ism_dev *ism = dev_get_drvdata(dev);
-
-	return ism_dev_init(ism);
-}
-
-static SIMPLE_DEV_PM_OPS(ism_pm_ops, ism_suspend, ism_resume);
-
 static struct pci_driver ism_driver = {
 	.name	  = DRV_NAME,
 	.id_table = ism_device_table,
 	.probe	  = ism_probe,
 	.remove	  = ism_remove,
-	.driver	  = {
-		.pm = &ism_pm_ops,
-	},
 };
 
 static int __init ism_init(void)
diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h
index acda230..e0b2631 100644
--- a/drivers/s390/net/qeth_core.h
+++ b/drivers/s390/net/qeth_core.h
@@ -181,11 +181,12 @@ struct qeth_vnicc_info {
 /*****************************************************************************/
 /* QDIO queue and buffer handling                                            */
 /*****************************************************************************/
-#define QETH_MAX_QUEUES 4
+#define QETH_MAX_OUT_QUEUES	4
 #define QETH_IQD_MIN_TXQ	2	/* One for ucast, one for mcast. */
 #define QETH_IQD_MCAST_TXQ	0
 #define QETH_IQD_MIN_UCAST_TXQ	1
 
+#define QETH_MAX_IN_QUEUES	2
 #define QETH_RX_COPYBREAK      (PAGE_SIZE >> 1)
 #define QETH_IN_BUF_SIZE_DEFAULT 65536
 #define QETH_IN_BUF_COUNT_DEFAULT 64
@@ -539,7 +540,7 @@ struct qeth_qdio_info {
 
 	/* output */
 	int no_out_queues;
-	struct qeth_qdio_out_q *out_qs[QETH_MAX_QUEUES];
+	struct qeth_qdio_out_q *out_qs[QETH_MAX_OUT_QUEUES];
 	struct qdio_outbuf_state *out_bufstates;
 
 	/* priority queueing */
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index 24fd17b..f768946 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -4812,28 +4812,13 @@ static void qeth_determine_capabilities(struct qeth_card *card)
 	return;
 }
 
-static void qeth_qdio_establish_cq(struct qeth_card *card,
-				   struct qdio_buffer **in_sbal_ptrs)
-{
-	int i;
-
-	if (card->options.cq == QETH_CQ_ENABLED) {
-		int offset = QDIO_MAX_BUFFERS_PER_Q *
-			     (card->qdio.no_in_queues - 1);
-
-		for (i = 0; i < QDIO_MAX_BUFFERS_PER_Q; i++)
-			in_sbal_ptrs[offset + i] =
-				card->qdio.c_q->bufs[i].buffer;
-	}
-}
-
 static int qeth_qdio_establish(struct qeth_card *card)
 {
+	struct qdio_buffer **out_sbal_ptrs[QETH_MAX_OUT_QUEUES];
+	struct qdio_buffer **in_sbal_ptrs[QETH_MAX_IN_QUEUES];
 	struct qdio_initialize init_data;
 	char *qib_param_field;
-	struct qdio_buffer **in_sbal_ptrs;
-	struct qdio_buffer **out_sbal_ptrs;
-	int i, j, k;
+	unsigned int i;
 	int rc = 0;
 
 	QETH_CARD_TEXT(card, 2, "qdioest");
@@ -4847,35 +4832,14 @@ static int qeth_qdio_establish(struct qeth_card *card)
 	qeth_create_qib_param_field(card, qib_param_field);
 	qeth_create_qib_param_field_blkt(card, qib_param_field);
 
-	in_sbal_ptrs = kcalloc(card->qdio.no_in_queues * QDIO_MAX_BUFFERS_PER_Q,
-			       sizeof(void *),
-			       GFP_KERNEL);
-	if (!in_sbal_ptrs) {
-		rc = -ENOMEM;
-		goto out_free_qib_param;
-	}
+	in_sbal_ptrs[0] = card->qdio.in_q->qdio_bufs;
+	if (card->options.cq == QETH_CQ_ENABLED)
+		in_sbal_ptrs[1] = card->qdio.c_q->qdio_bufs;
 
-	for (i = 0; i < QDIO_MAX_BUFFERS_PER_Q; i++)
-		in_sbal_ptrs[i] = card->qdio.in_q->bufs[i].buffer;
-
-	qeth_qdio_establish_cq(card, in_sbal_ptrs);
-
-	out_sbal_ptrs =
-		kcalloc(card->qdio.no_out_queues * QDIO_MAX_BUFFERS_PER_Q,
-			sizeof(void *),
-			GFP_KERNEL);
-	if (!out_sbal_ptrs) {
-		rc = -ENOMEM;
-		goto out_free_in_sbals;
-	}
-
-	for (i = 0, k = 0; i < card->qdio.no_out_queues; ++i)
-		for (j = 0; j < QDIO_MAX_BUFFERS_PER_Q; j++, k++)
-			out_sbal_ptrs[k] =
-				card->qdio.out_qs[i]->bufs[j]->buffer;
+	for (i = 0; i < card->qdio.no_out_queues; i++)
+		out_sbal_ptrs[i] = card->qdio.out_qs[i]->qdio_bufs;
 
 	memset(&init_data, 0, sizeof(struct qdio_initialize));
-	init_data.cdev                   = CARD_DDEV(card);
 	init_data.q_format		 = IS_IQD(card) ? QDIO_IQDIO_QFMT :
 							  QDIO_QETH_QFMT;
 	init_data.qib_param_field_format = 0;
@@ -4893,12 +4857,13 @@ static int qeth_qdio_establish(struct qeth_card *card)
 
 	if (atomic_cmpxchg(&card->qdio.state, QETH_QDIO_ALLOCATED,
 		QETH_QDIO_ESTABLISHED) == QETH_QDIO_ALLOCATED) {
-		rc = qdio_allocate(&init_data);
+		rc = qdio_allocate(CARD_DDEV(card), init_data.no_input_qs,
+				   init_data.no_output_qs);
 		if (rc) {
 			atomic_set(&card->qdio.state, QETH_QDIO_ALLOCATED);
 			goto out;
 		}
-		rc = qdio_establish(&init_data);
+		rc = qdio_establish(CARD_DDEV(card), &init_data);
 		if (rc) {
 			atomic_set(&card->qdio.state, QETH_QDIO_ALLOCATED);
 			qdio_free(CARD_DDEV(card));
@@ -4916,10 +4881,6 @@ static int qeth_qdio_establish(struct qeth_card *card)
 		break;
 	}
 out:
-	kfree(out_sbal_ptrs);
-out_free_in_sbals:
-	kfree(in_sbal_ptrs);
-out_free_qib_param:
 	kfree(qib_param_field);
 out_free_nothing:
 	return rc;
@@ -5985,7 +5946,7 @@ static struct net_device *qeth_alloc_netdev(struct qeth_card *card)
 	switch (card->info.type) {
 	case QETH_CARD_TYPE_IQD:
 		dev = alloc_netdev_mqs(sizeof(*priv), "hsi%d", NET_NAME_UNKNOWN,
-				       ether_setup, QETH_MAX_QUEUES, 1);
+				       ether_setup, QETH_MAX_OUT_QUEUES, 1);
 		break;
 	case QETH_CARD_TYPE_OSM:
 		dev = alloc_etherdev(sizeof(*priv));
@@ -5995,7 +5956,7 @@ static struct net_device *qeth_alloc_netdev(struct qeth_card *card)
 				   ether_setup);
 		break;
 	default:
-		dev = alloc_etherdev_mqs(sizeof(*priv), QETH_MAX_QUEUES, 1);
+		dev = alloc_etherdev_mqs(sizeof(*priv), QETH_MAX_OUT_QUEUES, 1);
 	}
 
 	if (!dev)
diff --git a/drivers/s390/scsi/zfcp_dbf.c b/drivers/s390/scsi/zfcp_dbf.c
index 12342947..673e42d 100644
--- a/drivers/s390/scsi/zfcp_dbf.c
+++ b/drivers/s390/scsi/zfcp_dbf.c
@@ -4,7 +4,7 @@
  *
  * Debug traces for zfcp.
  *
- * Copyright IBM Corp. 2002, 2018
+ * Copyright IBM Corp. 2002, 2020
  */
 
 #define KMSG_COMPONENT "zfcp"
@@ -104,6 +104,48 @@ void zfcp_dbf_hba_fsf_res(char *tag, int level, struct zfcp_fsf_req *req)
 }
 
 /**
+ * zfcp_dbf_hba_fsf_fces - trace event for fsf responses related to
+ *			   FC Endpoint Security (FCES)
+ * @tag: tag indicating which kind of FC Endpoint Security event has occurred
+ * @req: request for which a response was received
+ * @wwpn: remote port or ZFCP_DBF_INVALID_WWPN
+ * @fc_security_old: old FC Endpoint Security of FCP device or connection
+ * @fc_security_new: new FC Endpoint Security of FCP device or connection
+ */
+void zfcp_dbf_hba_fsf_fces(char *tag, const struct zfcp_fsf_req *req, u64 wwpn,
+			   u32 fc_security_old, u32 fc_security_new)
+{
+	struct zfcp_dbf *dbf = req->adapter->dbf;
+	struct fsf_qtcb_prefix *q_pref = &req->qtcb->prefix;
+	struct fsf_qtcb_header *q_head = &req->qtcb->header;
+	struct zfcp_dbf_hba *rec = &dbf->hba_buf;
+	static int const level = 3;
+	unsigned long flags;
+
+	if (unlikely(!debug_level_enabled(dbf->hba, level)))
+		return;
+
+	spin_lock_irqsave(&dbf->hba_lock, flags);
+	memset(rec, 0, sizeof(*rec));
+
+	memcpy(rec->tag, tag, ZFCP_DBF_TAG_LEN);
+	rec->id = ZFCP_DBF_HBA_FCES;
+	rec->fsf_req_id = req->req_id;
+	rec->fsf_req_status = req->status;
+	rec->fsf_cmd = q_head->fsf_command;
+	rec->fsf_seq_no = q_pref->req_seq_no;
+	rec->u.fces.req_issued = req->issued;
+	rec->u.fces.fsf_status = q_head->fsf_status;
+	rec->u.fces.port_handle = q_head->port_handle;
+	rec->u.fces.wwpn = wwpn;
+	rec->u.fces.fc_security_old = fc_security_old;
+	rec->u.fces.fc_security_new = fc_security_new;
+
+	debug_event(dbf->hba, level, rec, sizeof(*rec));
+	spin_unlock_irqrestore(&dbf->hba_lock, flags);
+}
+
+/**
  * zfcp_dbf_hba_fsf_uss - trace event for an unsolicited status buffer
  * @tag: tag indicating which kind of unsolicited status has been received
  * @req: request providing the unsolicited status
diff --git a/drivers/s390/scsi/zfcp_dbf.h b/drivers/s390/scsi/zfcp_dbf.h
index 900c779..4d1435c 100644
--- a/drivers/s390/scsi/zfcp_dbf.h
+++ b/drivers/s390/scsi/zfcp_dbf.h
@@ -3,7 +3,7 @@
  * zfcp device driver
  * debug feature declarations
  *
- * Copyright IBM Corp. 2008, 2017
+ * Copyright IBM Corp. 2008, 2020
  */
 
 #ifndef ZFCP_DBF_H
@@ -16,6 +16,7 @@
 
 #define ZFCP_DBF_TAG_LEN       7
 
+#define ZFCP_DBF_INVALID_WWPN	0x0000000000000000ull
 #define ZFCP_DBF_INVALID_LUN	0xFFFFFFFFFFFFFFFFull
 
 enum zfcp_dbf_pseudo_erp_act_type {
@@ -158,17 +159,38 @@ struct zfcp_dbf_hba_uss {
 } __packed;
 
 /**
+ * struct zfcp_dbf_hba_fces - trace record for FC Endpoint Security
+ * @req_issued: timestamp when request was issued
+ * @fsf_status: fsf status
+ * @port_handle: handle for port
+ * @wwpn: remote FC port WWPN
+ * @fc_security_old: old FC Endpoint Security
+ * @fc_security_new: new FC Endpoint Security
+ *
+ */
+struct zfcp_dbf_hba_fces {
+	u64 req_issued;
+	u32 fsf_status;
+	u32 port_handle;
+	u64 wwpn;
+	u32 fc_security_old;
+	u32 fc_security_new;
+} __packed;
+
+/**
  * enum zfcp_dbf_hba_id - HBA trace record identifier
  * @ZFCP_DBF_HBA_RES: response trace record
  * @ZFCP_DBF_HBA_USS: unsolicited status trace record
  * @ZFCP_DBF_HBA_BIT: bit error trace record
  * @ZFCP_DBF_HBA_BASIC: basic adapter event, only trace tag, no other data
+ * @ZFCP_DBF_HBA_FCES: FC Endpoint Security trace record
  */
 enum zfcp_dbf_hba_id {
 	ZFCP_DBF_HBA_RES	= 1,
 	ZFCP_DBF_HBA_USS	= 2,
 	ZFCP_DBF_HBA_BIT	= 3,
 	ZFCP_DBF_HBA_BASIC	= 4,
+	ZFCP_DBF_HBA_FCES	= 5,
 };
 
 /**
@@ -181,9 +203,10 @@ enum zfcp_dbf_hba_id {
  * @fsf_seq_no: fsf sequence number
  * @pl_len: length of payload stored as zfcp_dbf_pay
  * @u: record type specific data
- * @u.res: data for fsf responses
- * @u.uss: data for unsolicited status buffer
- * @u.be:  data for bit error unsolicited status buffer
+ * @u.res:  data for fsf responses
+ * @u.uss:  data for unsolicited status buffer
+ * @u.be:   data for bit error unsolicited status buffer
+ * @u.fces: data for FC Endpoint Security
  */
 struct zfcp_dbf_hba {
 	u8 id;
@@ -197,6 +220,7 @@ struct zfcp_dbf_hba {
 		struct zfcp_dbf_hba_res res;
 		struct zfcp_dbf_hba_uss uss;
 		struct fsf_bit_error_payload be;
+		struct zfcp_dbf_hba_fces fces;
 	} u;
 } __packed;
 
diff --git a/drivers/s390/scsi/zfcp_def.h b/drivers/s390/scsi/zfcp_def.h
index 8cc0eef..da8a5ce 100644
--- a/drivers/s390/scsi/zfcp_def.h
+++ b/drivers/s390/scsi/zfcp_def.h
@@ -4,7 +4,7 @@
  *
  * Global definitions for the zfcp device driver.
  *
- * Copyright IBM Corp. 2002, 2018
+ * Copyright IBM Corp. 2002, 2020
  */
 
 #ifndef ZFCP_DEF_H
@@ -158,6 +158,8 @@ struct zfcp_adapter {
 	u32			adapter_features;  /* FCP channel features */
 	u32			connection_features; /* host connection features */
         u32			hardware_version;  /* of FCP channel */
+	u32			fc_security_algorithms; /* of FCP channel */
+	u32			fc_security_algorithms_old; /* of FCP channel */
 	u16			timer_ticks;       /* time int for a tick */
 	struct Scsi_Host	*scsi_host;	   /* Pointer to mid-layer */
 	struct list_head	port_list;	   /* remote port list */
@@ -218,6 +220,8 @@ struct zfcp_port {
         atomic_t               erp_counter;
 	u32                    maxframe_size;
 	u32                    supported_classes;
+	u32                    connection_info;
+	u32                    connection_info_old;
 	struct work_struct     gid_pn_work;
 	struct work_struct     test_link_work;
 	struct work_struct     rport_work;
diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c
index 93655b8..3d0bc00 100644
--- a/drivers/s390/scsi/zfcp_erp.c
+++ b/drivers/s390/scsi/zfcp_erp.c
@@ -178,12 +178,12 @@ static enum zfcp_erp_act_type zfcp_erp_required_act(enum zfcp_erp_act_type want,
 			return 0;
 		if (!(p_status & ZFCP_STATUS_COMMON_UNBLOCKED))
 			need = ZFCP_ERP_ACTION_REOPEN_PORT;
-		/* fall through */
+		fallthrough;
 	case ZFCP_ERP_ACTION_REOPEN_PORT_FORCED:
 		p_status = atomic_read(&port->status);
 		if (!(p_status & ZFCP_STATUS_COMMON_OPEN))
 			need = ZFCP_ERP_ACTION_REOPEN_PORT;
-		/* fall through */
+		fallthrough;
 	case ZFCP_ERP_ACTION_REOPEN_PORT:
 		p_status = atomic_read(&port->status);
 		if (p_status & ZFCP_STATUS_COMMON_ERP_INUSE)
@@ -196,7 +196,7 @@ static enum zfcp_erp_act_type zfcp_erp_required_act(enum zfcp_erp_act_type want,
 			return need;
 		if (!(a_status & ZFCP_STATUS_COMMON_UNBLOCKED))
 			need = ZFCP_ERP_ACTION_REOPEN_ADAPTER;
-		/* fall through */
+		fallthrough;
 	case ZFCP_ERP_ACTION_REOPEN_ADAPTER:
 		a_status = atomic_read(&adapter->status);
 		if (a_status & ZFCP_STATUS_COMMON_ERP_INUSE)
@@ -725,7 +725,7 @@ static void zfcp_erp_enqueue_ptp_port(struct zfcp_adapter *adapter)
 				 adapter->peer_d_id);
 	if (IS_ERR(port)) /* error or port already attached */
 		return;
-	_zfcp_erp_port_reopen(port, 0, "ereptp1");
+	zfcp_erp_port_reopen(port, 0, "ereptp1");
 }
 
 static enum zfcp_erp_act_result zfcp_erp_adapter_strat_fsf_xconf(
@@ -1086,7 +1086,7 @@ static enum zfcp_erp_act_result zfcp_erp_lun_strategy(
 		if (atomic_read(&zfcp_sdev->status) & ZFCP_STATUS_COMMON_OPEN)
 			return zfcp_erp_lun_strategy_close(erp_action);
 		/* already closed */
-		/* fall through */
+		fallthrough;
 	case ZFCP_ERP_STEP_LUN_CLOSING:
 		if (atomic_read(&zfcp_sdev->status) & ZFCP_STATUS_COMMON_OPEN)
 			return ZFCP_ERP_FAILED;
@@ -1415,7 +1415,7 @@ static void zfcp_erp_action_cleanup(struct zfcp_erp_action *act,
 		if (act->step != ZFCP_ERP_STEP_UNINITIALIZED)
 			if (result == ZFCP_ERP_SUCCEEDED)
 				zfcp_erp_try_rport_unblock(port);
-		/* fall through */
+		fallthrough;
 	case ZFCP_ERP_ACTION_REOPEN_PORT_FORCED:
 		put_device(&port->dev);
 		break;
diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h
index c855678..88294ca 100644
--- a/drivers/s390/scsi/zfcp_ext.h
+++ b/drivers/s390/scsi/zfcp_ext.h
@@ -4,7 +4,7 @@
  *
  * External function declarations.
  *
- * Copyright IBM Corp. 2002, 2018
+ * Copyright IBM Corp. 2002, 2020
  */
 
 #ifndef ZFCP_EXT_H
@@ -44,6 +44,9 @@ extern void zfcp_dbf_rec_run_lvl(int level, char *tag,
 extern void zfcp_dbf_rec_run_wka(char *, struct zfcp_fc_wka_port *, u64);
 extern void zfcp_dbf_hba_fsf_uss(char *, struct zfcp_fsf_req *);
 extern void zfcp_dbf_hba_fsf_res(char *, int, struct zfcp_fsf_req *);
+extern void zfcp_dbf_hba_fsf_fces(char *tag, const struct zfcp_fsf_req *req,
+				  u64 wwpn, u32 fc_security_old,
+				  u32 fc_security_new);
 extern void zfcp_dbf_hba_bit_err(char *, struct zfcp_fsf_req *);
 extern void zfcp_dbf_hba_def_err(struct zfcp_adapter *, u64, u16, void **);
 extern void zfcp_dbf_hba_basic(char *, struct zfcp_adapter *);
@@ -135,6 +138,13 @@ extern struct zfcp_fsf_req *zfcp_fsf_fcp_task_mgmt(struct scsi_device *sdev,
 						   u8 tm_flags);
 extern struct zfcp_fsf_req *zfcp_fsf_abort_fcp_cmnd(struct scsi_cmnd *);
 extern void zfcp_fsf_reqid_check(struct zfcp_qdio *, int);
+enum zfcp_fsf_print_fmt {
+	ZFCP_FSF_PRINT_FMT_LIST,
+	ZFCP_FSF_PRINT_FMT_SINGLEITEM,
+};
+extern ssize_t zfcp_fsf_scnprint_fc_security(char *buf, size_t size,
+					     u32 fc_security,
+					     enum zfcp_fsf_print_fmt fmt);
 
 /* zfcp_qdio.c */
 extern int zfcp_qdio_setup(struct zfcp_adapter *);
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index cae9b7ff..111fe3f 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -4,7 +4,7 @@
  *
  * Implementation of FSF commands.
  *
- * Copyright IBM Corp. 2002, 2018
+ * Copyright IBM Corp. 2002, 2020
  */
 
 #define KMSG_COMPONENT "zfcp"
@@ -120,6 +120,23 @@ static void zfcp_fsf_status_read_port_closed(struct zfcp_fsf_req *req)
 	read_unlock_irqrestore(&adapter->port_list_lock, flags);
 }
 
+static void zfcp_fsf_fc_host_link_down(struct zfcp_adapter *adapter)
+{
+	struct Scsi_Host *shost = adapter->scsi_host;
+
+	fc_host_port_id(shost) = 0;
+	fc_host_fabric_name(shost) = 0;
+	fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN;
+	fc_host_port_type(shost) = FC_PORTTYPE_UNKNOWN;
+	adapter->hydra_version = 0;
+	snprintf(fc_host_model(shost), FC_SYMBOLIC_NAME_SIZE, "0x%04x", 0);
+	memset(fc_host_active_fc4s(shost), 0, FC_FC4_LIST_SIZE);
+
+	adapter->peer_wwpn = 0;
+	adapter->peer_wwnn = 0;
+	adapter->peer_d_id = 0;
+}
+
 static void zfcp_fsf_link_down_info_eval(struct zfcp_fsf_req *req,
 					 struct fsf_link_down_info *link_down)
 {
@@ -132,6 +149,8 @@ static void zfcp_fsf_link_down_info_eval(struct zfcp_fsf_req *req,
 
 	zfcp_scsi_schedule_rports_block(adapter);
 
+	zfcp_fsf_fc_host_link_down(adapter);
+
 	if (!link_down)
 		goto out;
 
@@ -502,6 +521,8 @@ static int zfcp_fsf_exchange_config_evaluate(struct zfcp_fsf_req *req)
 	if (req->data)
 		memcpy(req->data, bottom, sizeof(*bottom));
 
+	snprintf(fc_host_manufacturer(shost), FC_SERIAL_NUMBER_SIZE, "%s",
+		 "IBM");
 	fc_host_port_name(shost) = be64_to_cpu(nsp->fl_wwpn);
 	fc_host_node_name(shost) = be64_to_cpu(nsp->fl_wwnn);
 	fc_host_supported_classes(shost) = FC_COS_CLASS2 | FC_COS_CLASS3;
@@ -510,9 +531,6 @@ static int zfcp_fsf_exchange_config_evaluate(struct zfcp_fsf_req *req)
 	adapter->stat_read_buf_num = max(bottom->status_read_buf_num,
 					 (u16)FSF_STATUS_READS_RECOM);
 
-	if (fc_host_permanent_port_name(shost) == -1)
-		fc_host_permanent_port_name(shost) = fc_host_port_name(shost);
-
 	zfcp_scsi_set_prot(adapter);
 
 	/* no error return above here, otherwise must fix call chains */
@@ -525,6 +543,8 @@ static int zfcp_fsf_exchange_config_evaluate(struct zfcp_fsf_req *req)
 		zfcp_fsf_convert_portspeed(bottom->fc_link_speed);
 
 	adapter->hydra_version = bottom->adapter_type;
+	snprintf(fc_host_model(shost), FC_SYMBOLIC_NAME_SIZE, "0x%04x",
+		 bottom->adapter_type);
 
 	switch (bottom->fc_topology) {
 	case FSF_TOPO_P2P:
@@ -532,8 +552,10 @@ static int zfcp_fsf_exchange_config_evaluate(struct zfcp_fsf_req *req)
 		adapter->peer_wwpn = be64_to_cpu(plogi->fl_wwpn);
 		adapter->peer_wwnn = be64_to_cpu(plogi->fl_wwnn);
 		fc_host_port_type(shost) = FC_PORTTYPE_PTP;
+		fc_host_fabric_name(shost) = 0;
 		break;
 	case FSF_TOPO_FABRIC:
+		fc_host_fabric_name(shost) = be64_to_cpu(plogi->fl_wwnn);
 		if (bottom->connection_features & FSF_FEATURE_NPIV_MODE)
 			fc_host_port_type(shost) = FC_PORTTYPE_NPIV;
 		else
@@ -541,8 +563,10 @@ static int zfcp_fsf_exchange_config_evaluate(struct zfcp_fsf_req *req)
 		break;
 	case FSF_TOPO_AL:
 		fc_host_port_type(shost) = FC_PORTTYPE_NLPORT;
-		/* fall through */
+		fc_host_fabric_name(shost) = 0;
+		fallthrough;
 	default:
+		fc_host_fabric_name(shost) = 0;
 		dev_err(&adapter->ccw_device->dev,
 			"Unknown or unsupported arbitrated loop "
 			"fibre channel topology detected\n");
@@ -565,6 +589,8 @@ static void zfcp_fsf_exchange_config_data_handler(struct zfcp_fsf_req *req)
 	if (req->status & ZFCP_STATUS_FSFREQ_ERROR)
 		return;
 
+	snprintf(fc_host_firmware_version(shost), FC_VERSION_STRING_SIZE,
+		 "0x%08x", bottom->lic_version);
 	adapter->fsf_lic_version = bottom->lic_version;
 	adapter->adapter_features = bottom->adapter_features;
 	adapter->connection_features = bottom->connection_features;
@@ -598,13 +624,6 @@ static void zfcp_fsf_exchange_config_data_handler(struct zfcp_fsf_req *req)
 		zfcp_diag_update_xdata(diag_hdr, bottom, true);
 		req->status |= ZFCP_STATUS_FSFREQ_XDATAINCOMPLETE;
 
-		fc_host_node_name(shost) = 0;
-		fc_host_port_name(shost) = 0;
-		fc_host_port_id(shost) = 0;
-		fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN;
-		fc_host_port_type(shost) = FC_PORTTYPE_UNKNOWN;
-		adapter->hydra_version = 0;
-
 		/* avoids adapter shutdown to be able to recognize
 		 * events such as LINK UP */
 		atomic_or(ZFCP_STATUS_ADAPTER_XCONFIG_OK,
@@ -621,6 +640,9 @@ static void zfcp_fsf_exchange_config_data_handler(struct zfcp_fsf_req *req)
 
 	if (adapter->adapter_features & FSF_FEATURE_HBAAPI_MANAGEMENT) {
 		adapter->hardware_version = bottom->hardware_version;
+		snprintf(fc_host_hardware_version(shost),
+			 FC_VERSION_STRING_SIZE,
+			 "0x%08x", bottom->hardware_version);
 		memcpy(fc_host_serial_number(shost), bottom->serial_number,
 		       min(FC_SERIAL_NUMBER_SIZE, 17));
 		EBCASC(fc_host_serial_number(shost),
@@ -642,6 +664,99 @@ static void zfcp_fsf_exchange_config_data_handler(struct zfcp_fsf_req *req)
 	}
 }
 
+/*
+ * Mapping of FC Endpoint Security flag masks to mnemonics
+ *
+ * NOTE: Update macro ZFCP_FSF_MAX_FC_SECURITY_MNEMONIC_LENGTH when making any
+ *       changes.
+ */
+static const struct {
+	u32	mask;
+	char	*name;
+} zfcp_fsf_fc_security_mnemonics[] = {
+	{ FSF_FC_SECURITY_AUTH,		"Authentication" },
+	{ FSF_FC_SECURITY_ENC_FCSP2 |
+	  FSF_FC_SECURITY_ENC_ERAS,	"Encryption" },
+};
+
+/* maximum strlen(zfcp_fsf_fc_security_mnemonics[...].name) + 1 */
+#define ZFCP_FSF_MAX_FC_SECURITY_MNEMONIC_LENGTH 15
+
+/**
+ * zfcp_fsf_scnprint_fc_security() - translate FC Endpoint Security flags into
+ *                                   mnemonics and place in a buffer
+ * @buf        : the buffer to place the translated FC Endpoint Security flag(s)
+ *               into
+ * @size       : the size of the buffer, including the trailing null space
+ * @fc_security: one or more FC Endpoint Security flags, or zero
+ * @fmt        : specifies whether a list or a single item is to be put into the
+ *               buffer
+ *
+ * The Fibre Channel (FC) Endpoint Security flags are translated into mnemonics.
+ * If the FC Endpoint Security flags are zero "none" is placed into the buffer.
+ *
+ * With ZFCP_FSF_PRINT_FMT_LIST the mnemonics are placed as a list separated by
+ * a comma followed by a space into the buffer. If one or more FC Endpoint
+ * Security flags cannot be translated into a mnemonic, as they are undefined
+ * in zfcp_fsf_fc_security_mnemonics, their bitwise ORed value in hexadecimal
+ * representation is placed into the buffer.
+ *
+ * With ZFCP_FSF_PRINT_FMT_SINGLEITEM only one single mnemonic is placed into
+ * the buffer. If the FC Endpoint Security flag cannot be translated, as it is
+ * undefined in zfcp_fsf_fc_security_mnemonics, its value in hexadecimal
+ * representation is placed into the buffer. If more than one FC Endpoint
+ * Security flag was specified, their value in hexadecimal representation is
+ * placed into the buffer. The macro ZFCP_FSF_MAX_FC_SECURITY_MNEMONIC_LENGTH
+ * can be used to define a buffer that is large enough to hold one mnemonic.
+ *
+ * Return: The number of characters written into buf not including the trailing
+ *         '\0'. If size is == 0 the function returns 0.
+ */
+ssize_t zfcp_fsf_scnprint_fc_security(char *buf, size_t size, u32 fc_security,
+				      enum zfcp_fsf_print_fmt fmt)
+{
+	const char *prefix = "";
+	ssize_t len = 0;
+	int i;
+
+	if (fc_security == 0)
+		return scnprintf(buf, size, "none");
+	if (fmt == ZFCP_FSF_PRINT_FMT_SINGLEITEM && hweight32(fc_security) != 1)
+		return scnprintf(buf, size, "0x%08x", fc_security);
+
+	for (i = 0; i < ARRAY_SIZE(zfcp_fsf_fc_security_mnemonics); i++) {
+		if (!(fc_security & zfcp_fsf_fc_security_mnemonics[i].mask))
+			continue;
+
+		len += scnprintf(buf + len, size - len, "%s%s", prefix,
+				 zfcp_fsf_fc_security_mnemonics[i].name);
+		prefix = ", ";
+		fc_security &= ~zfcp_fsf_fc_security_mnemonics[i].mask;
+	}
+
+	if (fc_security != 0)
+		len += scnprintf(buf + len, size - len, "%s0x%08x",
+				 prefix, fc_security);
+
+	return len;
+}
+
+static void zfcp_fsf_dbf_adapter_fc_security(struct zfcp_adapter *adapter,
+					     struct zfcp_fsf_req *req)
+{
+	if (adapter->fc_security_algorithms ==
+	    adapter->fc_security_algorithms_old) {
+		/* no change, no trace */
+		return;
+	}
+
+	zfcp_dbf_hba_fsf_fces("fsfcesa", req, ZFCP_DBF_INVALID_WWPN,
+			      adapter->fc_security_algorithms_old,
+			      adapter->fc_security_algorithms);
+
+	adapter->fc_security_algorithms_old = adapter->fc_security_algorithms;
+}
+
 static void zfcp_fsf_exchange_port_evaluate(struct zfcp_fsf_req *req)
 {
 	struct zfcp_adapter *adapter = req->adapter;
@@ -651,10 +766,7 @@ static void zfcp_fsf_exchange_port_evaluate(struct zfcp_fsf_req *req)
 	if (req->data)
 		memcpy(req->data, bottom, sizeof(*bottom));
 
-	if (adapter->connection_features & FSF_FEATURE_NPIV_MODE) {
-		fc_host_permanent_port_name(shost) = bottom->wwpn;
-	} else
-		fc_host_permanent_port_name(shost) = fc_host_port_name(shost);
+	fc_host_permanent_port_name(shost) = bottom->wwpn;
 	fc_host_maxframe_size(shost) = bottom->maximum_frame_size;
 	fc_host_supported_speeds(shost) =
 		zfcp_fsf_convert_portspeed(bottom->supported_speed);
@@ -662,6 +774,12 @@ static void zfcp_fsf_exchange_port_evaluate(struct zfcp_fsf_req *req)
 	       FC_FC4_LIST_SIZE);
 	memcpy(fc_host_active_fc4s(shost), bottom->active_fc4_types,
 	       FC_FC4_LIST_SIZE);
+	if (adapter->adapter_features & FSF_FEATURE_FC_SECURITY)
+		adapter->fc_security_algorithms =
+			bottom->fc_security_algorithms;
+	else
+		adapter->fc_security_algorithms = 0;
+	zfcp_fsf_dbf_adapter_fc_security(adapter, req);
 }
 
 static void zfcp_fsf_exchange_port_data_handler(struct zfcp_fsf_req *req)
@@ -688,9 +806,9 @@ static void zfcp_fsf_exchange_port_data_handler(struct zfcp_fsf_req *req)
 		zfcp_diag_update_xdata(diag_hdr, bottom, true);
 		req->status |= ZFCP_STATUS_FSFREQ_XDATAINCOMPLETE;
 
-		zfcp_fsf_exchange_port_evaluate(req);
 		zfcp_fsf_link_down_info_eval(req,
 			&qtcb->header.fsf_status_qual.link_down_info);
+		zfcp_fsf_exchange_port_evaluate(req);
 		break;
 	}
 }
@@ -914,7 +1032,7 @@ static void zfcp_fsf_abort_fcp_command_handler(struct zfcp_fsf_req *req)
 		switch (fsq->word[0]) {
 		case FSF_SQ_INVOKE_LINK_TEST_PROCEDURE:
 			zfcp_fc_test_link(zfcp_sdev->port);
-			/* fall through */
+			fallthrough;
 		case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED:
 			req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 			break;
@@ -1009,7 +1127,7 @@ static void zfcp_fsf_send_ct_handler(struct zfcp_fsf_req *req)
 		break;
 	case FSF_PORT_HANDLE_NOT_VALID:
 		zfcp_erp_adapter_reopen(adapter, 0, "fsscth1");
-		/* fall through */
+		fallthrough;
 	case FSF_GENERIC_COMMAND_REJECTED:
 	case FSF_PAYLOAD_SIZE_MISMATCH:
 	case FSF_REQUEST_SIZE_TOO_LARGE:
@@ -1195,7 +1313,7 @@ static void zfcp_fsf_send_els_handler(struct zfcp_fsf_req *req)
 		break;
 	case FSF_SBAL_MISMATCH:
 		/* should never occur, avoided in zfcp_fsf_send_els */
-		/* fall through */
+		fallthrough;
 	default:
 		req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 		break;
@@ -1287,7 +1405,8 @@ int zfcp_fsf_exchange_config_data(struct zfcp_erp_action *erp_action)
 	req->qtcb->bottom.config.feature_selection =
 			FSF_FEATURE_NOTIFICATION_LOST |
 			FSF_FEATURE_UPDATE_ALERT |
-			FSF_FEATURE_REQUEST_SFP_DATA;
+			FSF_FEATURE_REQUEST_SFP_DATA |
+			FSF_FEATURE_FC_SECURITY;
 	req->erp_action = erp_action;
 	req->handler = zfcp_fsf_exchange_config_data_handler;
 	erp_action->fsf_req_id = req->req_id;
@@ -1341,7 +1460,8 @@ int zfcp_fsf_exchange_config_data_sync(struct zfcp_qdio *qdio,
 	req->qtcb->bottom.config.feature_selection =
 			FSF_FEATURE_NOTIFICATION_LOST |
 			FSF_FEATURE_UPDATE_ALERT |
-			FSF_FEATURE_REQUEST_SFP_DATA;
+			FSF_FEATURE_REQUEST_SFP_DATA |
+			FSF_FEATURE_FC_SECURITY;
 
 	if (data)
 		req->data = data;
@@ -1478,10 +1598,117 @@ int zfcp_fsf_exchange_port_data_sync(struct zfcp_qdio *qdio,
 	return retval;
 }
 
+static void zfcp_fsf_log_port_fc_security(struct zfcp_port *port,
+					  struct zfcp_fsf_req *req)
+{
+	char mnemonic_old[ZFCP_FSF_MAX_FC_SECURITY_MNEMONIC_LENGTH];
+	char mnemonic_new[ZFCP_FSF_MAX_FC_SECURITY_MNEMONIC_LENGTH];
+
+	if (port->connection_info == port->connection_info_old) {
+		/* no change, no log nor trace */
+		return;
+	}
+
+	zfcp_dbf_hba_fsf_fces("fsfcesp", req, port->wwpn,
+			      port->connection_info_old,
+			      port->connection_info);
+
+	zfcp_fsf_scnprint_fc_security(mnemonic_old, sizeof(mnemonic_old),
+				      port->connection_info_old,
+				      ZFCP_FSF_PRINT_FMT_SINGLEITEM);
+	zfcp_fsf_scnprint_fc_security(mnemonic_new, sizeof(mnemonic_new),
+				      port->connection_info,
+				      ZFCP_FSF_PRINT_FMT_SINGLEITEM);
+
+	if (strncmp(mnemonic_old, mnemonic_new,
+		    ZFCP_FSF_MAX_FC_SECURITY_MNEMONIC_LENGTH) == 0) {
+		/* no change in string representation, no log */
+		goto out;
+	}
+
+	if (port->connection_info_old == 0) {
+		/* activation */
+		dev_info(&port->adapter->ccw_device->dev,
+			 "FC Endpoint Security of connection to remote port 0x%16llx enabled: %s\n",
+			 port->wwpn, mnemonic_new);
+	} else if (port->connection_info == 0) {
+		/* deactivation */
+		dev_warn(&port->adapter->ccw_device->dev,
+			 "FC Endpoint Security of connection to remote port 0x%16llx disabled: was %s\n",
+			 port->wwpn, mnemonic_old);
+	} else {
+		/* change */
+		dev_warn(&port->adapter->ccw_device->dev,
+			 "FC Endpoint Security of connection to remote port 0x%16llx changed: from %s to %s\n",
+			 port->wwpn, mnemonic_old, mnemonic_new);
+	}
+
+out:
+	port->connection_info_old = port->connection_info;
+}
+
+static void zfcp_fsf_log_security_error(const struct device *dev, u32 fsf_sqw0,
+					u64 wwpn)
+{
+	switch (fsf_sqw0) {
+
+	/*
+	 * Open Port command error codes
+	 */
+
+	case FSF_SQ_SECURITY_REQUIRED:
+		dev_warn_ratelimited(dev,
+				     "FC Endpoint Security error: FC security is required but not supported or configured on remote port 0x%016llx\n",
+				     wwpn);
+		break;
+	case FSF_SQ_SECURITY_TIMEOUT:
+		dev_warn_ratelimited(dev,
+				     "FC Endpoint Security error: a timeout prevented opening remote port 0x%016llx\n",
+				     wwpn);
+		break;
+	case FSF_SQ_SECURITY_KM_UNAVAILABLE:
+		dev_warn_ratelimited(dev,
+				     "FC Endpoint Security error: opening remote port 0x%016llx failed because local and external key manager cannot communicate\n",
+				     wwpn);
+		break;
+	case FSF_SQ_SECURITY_RKM_UNAVAILABLE:
+		dev_warn_ratelimited(dev,
+				     "FC Endpoint Security error: opening remote port 0x%016llx failed because it cannot communicate with the external key manager\n",
+				     wwpn);
+		break;
+	case FSF_SQ_SECURITY_AUTH_FAILURE:
+		dev_warn_ratelimited(dev,
+				     "FC Endpoint Security error: the device could not verify the identity of remote port 0x%016llx\n",
+				     wwpn);
+		break;
+
+	/*
+	 * Send FCP command error codes
+	 */
+
+	case FSF_SQ_SECURITY_ENC_FAILURE:
+		dev_warn_ratelimited(dev,
+				     "FC Endpoint Security error: FC connection to remote port 0x%016llx closed because encryption broke down\n",
+				     wwpn);
+		break;
+
+	/*
+	 * Unknown error codes
+	 */
+
+	default:
+		dev_warn_ratelimited(dev,
+				     "FC Endpoint Security error: the device issued an unknown error code 0x%08x related to the FC connection to remote port 0x%016llx\n",
+				     fsf_sqw0, wwpn);
+	}
+}
+
 static void zfcp_fsf_open_port_handler(struct zfcp_fsf_req *req)
 {
+	struct zfcp_adapter *adapter = req->adapter;
 	struct zfcp_port *port = req->data;
 	struct fsf_qtcb_header *header = &req->qtcb->header;
+	struct fsf_qtcb_bottom_support *bottom = &req->qtcb->bottom.support;
 	struct fc_els_flogi *plogi;
 
 	if (req->status & ZFCP_STATUS_FSFREQ_ERROR)
@@ -1491,7 +1718,7 @@ static void zfcp_fsf_open_port_handler(struct zfcp_fsf_req *req)
 	case FSF_PORT_ALREADY_OPEN:
 		break;
 	case FSF_MAXIMUM_NUMBER_OF_PORTS_EXCEEDED:
-		dev_warn(&req->adapter->ccw_device->dev,
+		dev_warn(&adapter->ccw_device->dev,
 			 "Not enough FCP adapter resources to open "
 			 "remote port 0x%016Lx\n",
 			 (unsigned long long)port->wwpn);
@@ -1499,11 +1726,17 @@ static void zfcp_fsf_open_port_handler(struct zfcp_fsf_req *req)
 					 ZFCP_STATUS_COMMON_ERP_FAILED);
 		req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 		break;
+	case FSF_SECURITY_ERROR:
+		zfcp_fsf_log_security_error(&req->adapter->ccw_device->dev,
+					    header->fsf_status_qual.word[0],
+					    port->wwpn);
+		req->status |= ZFCP_STATUS_FSFREQ_ERROR;
+		break;
 	case FSF_ADAPTER_STATUS_AVAILABLE:
 		switch (header->fsf_status_qual.word[0]) {
 		case FSF_SQ_INVOKE_LINK_TEST_PROCEDURE:
 			/* no zfcp_fc_test_link() with failed open port */
-			/* fall through */
+			fallthrough;
 		case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED:
 		case FSF_SQ_NO_RETRY_POSSIBLE:
 			req->status |= ZFCP_STATUS_FSFREQ_ERROR;
@@ -1512,6 +1745,11 @@ static void zfcp_fsf_open_port_handler(struct zfcp_fsf_req *req)
 		break;
 	case FSF_GOOD:
 		port->handle = header->port_handle;
+		if (adapter->adapter_features & FSF_FEATURE_FC_SECURITY)
+			port->connection_info = bottom->connection_info;
+		else
+			port->connection_info = 0;
+		zfcp_fsf_log_port_fc_security(port, req);
 		atomic_or(ZFCP_STATUS_COMMON_OPEN |
 				ZFCP_STATUS_PORT_PHYS_OPEN, &port->status);
 		atomic_andnot(ZFCP_STATUS_COMMON_ACCESS_BOXED,
@@ -1531,10 +1769,9 @@ static void zfcp_fsf_open_port_handler(struct zfcp_fsf_req *req)
 		 * another GID_PN straight after a port has been opened.
 		 * Alternately, an ADISC/PDISC ELS should suffice, as well.
 		 */
-		plogi = (struct fc_els_flogi *) req->qtcb->bottom.support.els;
-		if (req->qtcb->bottom.support.els1_length >=
-		    FSF_PLOGI_MIN_LEN)
-				zfcp_fc_plogi_evaluate(port, plogi);
+		plogi = (struct fc_els_flogi *) bottom->els;
+		if (bottom->els1_length >= FSF_PLOGI_MIN_LEN)
+			zfcp_fc_plogi_evaluate(port, plogi);
 		break;
 	case FSF_UNKNOWN_OP_SUBTYPE:
 		req->status |= ZFCP_STATUS_FSFREQ_ERROR;
@@ -1672,14 +1909,14 @@ static void zfcp_fsf_open_wka_port_handler(struct zfcp_fsf_req *req)
 	case FSF_MAXIMUM_NUMBER_OF_PORTS_EXCEEDED:
 		dev_warn(&req->adapter->ccw_device->dev,
 			 "Opening WKA port 0x%x failed\n", wka_port->d_id);
-		/* fall through */
+		fallthrough;
 	case FSF_ADAPTER_STATUS_AVAILABLE:
 		req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 		wka_port->status = ZFCP_FC_WKA_PORT_OFFLINE;
 		break;
 	case FSF_GOOD:
 		wka_port->handle = header->port_handle;
-		/* fall through */
+		fallthrough;
 	case FSF_PORT_ALREADY_OPEN:
 		wka_port->status = ZFCP_FC_WKA_PORT_ONLINE;
 	}
@@ -1822,7 +2059,6 @@ static void zfcp_fsf_close_physical_port_handler(struct zfcp_fsf_req *req)
 	case FSF_ADAPTER_STATUS_AVAILABLE:
 		switch (header->fsf_status_qual.word[0]) {
 		case FSF_SQ_INVOKE_LINK_TEST_PROCEDURE:
-			/* fall through */
 		case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED:
 			req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 			break;
@@ -1907,7 +2143,7 @@ static void zfcp_fsf_open_lun_handler(struct zfcp_fsf_req *req)
 
 	case FSF_PORT_HANDLE_NOT_VALID:
 		zfcp_erp_adapter_reopen(adapter, 0, "fsouh_1");
-		/* fall through */
+		fallthrough;
 	case FSF_LUN_ALREADY_OPEN:
 		break;
 	case FSF_PORT_BOXED:
@@ -1938,7 +2174,7 @@ static void zfcp_fsf_open_lun_handler(struct zfcp_fsf_req *req)
 			 (unsigned long long)zfcp_scsi_dev_lun(sdev),
 			 (unsigned long long)zfcp_sdev->port->wwpn);
 		zfcp_erp_set_lun_status(sdev, ZFCP_STATUS_COMMON_ERP_FAILED);
-		/* fall through */
+		fallthrough;
 	case FSF_INVALID_COMMAND_OPTION:
 		req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 		break;
@@ -1946,7 +2182,7 @@ static void zfcp_fsf_open_lun_handler(struct zfcp_fsf_req *req)
 		switch (header->fsf_status_qual.word[0]) {
 		case FSF_SQ_INVOKE_LINK_TEST_PROCEDURE:
 			zfcp_fc_test_link(zfcp_sdev->port);
-			/* fall through */
+			fallthrough;
 		case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED:
 			req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 			break;
@@ -2040,7 +2276,7 @@ static void zfcp_fsf_close_lun_handler(struct zfcp_fsf_req *req)
 		switch (req->qtcb->header.fsf_status_qual.word[0]) {
 		case FSF_SQ_INVOKE_LINK_TEST_PROCEDURE:
 			zfcp_fc_test_link(zfcp_sdev->port);
-			/* fall through */
+			fallthrough;
 		case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED:
 			req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 			break;
@@ -2225,6 +2461,13 @@ static void zfcp_fsf_fcp_handler_common(struct zfcp_fsf_req *req,
 			zfcp_fc_test_link(zfcp_sdev->port);
 		req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 		break;
+	case FSF_SECURITY_ERROR:
+		zfcp_fsf_log_security_error(&req->adapter->ccw_device->dev,
+					    header->fsf_status_qual.word[0],
+					    zfcp_sdev->port->wwpn);
+		zfcp_erp_port_forced_reopen(zfcp_sdev->port, 0, "fssfch7");
+		req->status |= ZFCP_STATUS_FSFREQ_ERROR;
+		break;
 	}
 }
 
diff --git a/drivers/s390/scsi/zfcp_fsf.h b/drivers/s390/scsi/zfcp_fsf.h
index 4bfb79f..09d73d00 100644
--- a/drivers/s390/scsi/zfcp_fsf.h
+++ b/drivers/s390/scsi/zfcp_fsf.h
@@ -4,7 +4,7 @@
  *
  * Interface to the FSF support functions.
  *
- * Copyright IBM Corp. 2002, 2018
+ * Copyright IBM Corp. 2002, 2020
  */
 
 #ifndef FSF_H
@@ -78,6 +78,7 @@
 #define FSF_BLOCK_GUARD_CHECK_FAILURE		0x00000081
 #define FSF_APP_TAG_CHECK_FAILURE		0x00000082
 #define FSF_REF_TAG_CHECK_FAILURE		0x00000083
+#define FSF_SECURITY_ERROR			0x00000090
 #define FSF_ADAPTER_STATUS_AVAILABLE		0x000000AD
 #define FSF_FCP_RSP_AVAILABLE			0x000000AF
 #define FSF_UNKNOWN_COMMAND			0x000000E2
@@ -110,6 +111,14 @@
 #define FSF_PSQ_LINK_MODE_TABLE_CURRUPTED	0x00004000
 #define FSF_PSQ_LINK_NO_WWPN_ASSIGNMENT		0x00008000
 
+/* FSF status qualifier, security error */
+#define FSF_SQ_SECURITY_REQUIRED		0x00000001
+#define FSF_SQ_SECURITY_TIMEOUT			0x00000002
+#define FSF_SQ_SECURITY_KM_UNAVAILABLE		0x00000003
+#define FSF_SQ_SECURITY_RKM_UNAVAILABLE		0x00000004
+#define FSF_SQ_SECURITY_AUTH_FAILURE		0x00000005
+#define FSF_SQ_SECURITY_ENC_FAILURE		0x00000010
+
 /* payload size in status read buffer */
 #define FSF_STATUS_READ_PAYLOAD_SIZE		4032
 
@@ -165,6 +174,7 @@
 #define FSF_FEATURE_MEASUREMENT_DATA		0x00000200
 #define FSF_FEATURE_REQUEST_SFP_DATA		0x00000200
 #define FSF_FEATURE_REPORT_SFP_DATA		0x00000800
+#define FSF_FEATURE_FC_SECURITY			0x00001000
 #define FSF_FEATURE_DIF_PROT_TYPE1		0x00010000
 #define FSF_FEATURE_DIX_PROT_TCPIP		0x00020000
 
@@ -174,6 +184,11 @@
 /* option */
 #define FSF_OPEN_LUN_SUPPRESS_BOXING		0x00000001
 
+/* FC security algorithms */
+#define FSF_FC_SECURITY_AUTH			0x00000001
+#define FSF_FC_SECURITY_ENC_FCSP2		0x00000002
+#define FSF_FC_SECURITY_ENC_ERAS		0x00000004
+
 struct fsf_queue_designator {
 	u8  cssid;
 	u8  chpid;
@@ -338,7 +353,8 @@ struct fsf_qtcb_bottom_support {
 	u8  res3[3];
 	u8  timeout;
         u32 lun_access_info;
-        u8  res4[180];
+	u32 connection_info;
+	u8  res4[176];
 	u32 els1_length;
 	u32 els2_length;
 	u32 req_buf_length;
@@ -426,7 +442,8 @@ struct fsf_qtcb_bottom_port {
 			u16 port_tx_type	:4;
 		};
 	} sfp_flags;
-	u8 res3[240];
+	u32 fc_security_algorithms;
+	u8 res3[236];
 } __attribute__ ((packed));
 
 union fsf_qtcb_bottom {
diff --git a/drivers/s390/scsi/zfcp_qdio.c b/drivers/s390/scsi/zfcp_qdio.c
index f0d6296e..26702b5 100644
--- a/drivers/s390/scsi/zfcp_qdio.c
+++ b/drivers/s390/scsi/zfcp_qdio.c
@@ -277,29 +277,6 @@ int zfcp_qdio_send(struct zfcp_qdio *qdio, struct zfcp_qdio_req *q_req)
 	return 0;
 }
 
-
-static void zfcp_qdio_setup_init_data(struct qdio_initialize *id,
-				      struct zfcp_qdio *qdio)
-{
-	memset(id, 0, sizeof(*id));
-	id->cdev = qdio->adapter->ccw_device;
-	id->q_format = QDIO_ZFCP_QFMT;
-	memcpy(id->adapter_name, dev_name(&id->cdev->dev), 8);
-	ASCEBC(id->adapter_name, 8);
-	id->qib_rflags = QIB_RFLAGS_ENABLE_DATA_DIV;
-	if (enable_multibuffer)
-		id->qdr_ac |= QDR_AC_MULTI_BUFFER_ENABLE;
-	id->no_input_qs = 1;
-	id->no_output_qs = 1;
-	id->input_handler = zfcp_qdio_int_resp;
-	id->output_handler = zfcp_qdio_int_req;
-	id->int_parm = (unsigned long) qdio;
-	id->input_sbal_addr_array = qdio->res_q;
-	id->output_sbal_addr_array = qdio->req_q;
-	id->scan_threshold =
-		QDIO_MAX_BUFFERS_PER_Q - ZFCP_QDIO_MAX_SBALS_PER_REQ * 2;
-}
-
 /**
  * zfcp_qdio_allocate - allocate queue memory and initialize QDIO data
  * @qdio: pointer to struct zfcp_qdio
@@ -308,7 +285,6 @@ static void zfcp_qdio_setup_init_data(struct qdio_initialize *id,
  */
 static int zfcp_qdio_allocate(struct zfcp_qdio *qdio)
 {
-	struct qdio_initialize init_data;
 	int ret;
 
 	ret = qdio_alloc_buffers(qdio->req_q, QDIO_MAX_BUFFERS_PER_Q);
@@ -319,10 +295,9 @@ static int zfcp_qdio_allocate(struct zfcp_qdio *qdio)
 	if (ret)
 		goto free_req_q;
 
-	zfcp_qdio_setup_init_data(&init_data, qdio);
 	init_waitqueue_head(&qdio->req_q_wq);
 
-	ret = qdio_allocate(&init_data);
+	ret = qdio_allocate(qdio->adapter->ccw_device, 1, 1);
 	if (ret)
 		goto free_res_q;
 
@@ -374,8 +349,10 @@ void zfcp_qdio_close(struct zfcp_qdio *qdio)
  */
 int zfcp_qdio_open(struct zfcp_qdio *qdio)
 {
+	struct qdio_buffer **input_sbals[1] = {qdio->res_q};
+	struct qdio_buffer **output_sbals[1] = {qdio->req_q};
 	struct qdio_buffer_element *sbale;
-	struct qdio_initialize init_data;
+	struct qdio_initialize init_data = {0};
 	struct zfcp_adapter *adapter = qdio->adapter;
 	struct ccw_device *cdev = adapter->ccw_device;
 	struct qdio_ssqd_desc ssqd;
@@ -387,12 +364,26 @@ int zfcp_qdio_open(struct zfcp_qdio *qdio)
 	atomic_andnot(ZFCP_STATUS_ADAPTER_SIOSL_ISSUED,
 			  &qdio->adapter->status);
 
-	zfcp_qdio_setup_init_data(&init_data, qdio);
+	init_data.q_format = QDIO_ZFCP_QFMT;
+	memcpy(init_data.adapter_name, dev_name(&cdev->dev), 8);
+	ASCEBC(init_data.adapter_name, 8);
+	init_data.qib_rflags = QIB_RFLAGS_ENABLE_DATA_DIV;
+	if (enable_multibuffer)
+		init_data.qdr_ac |= QDR_AC_MULTI_BUFFER_ENABLE;
+	init_data.no_input_qs = 1;
+	init_data.no_output_qs = 1;
+	init_data.input_handler = zfcp_qdio_int_resp;
+	init_data.output_handler = zfcp_qdio_int_req;
+	init_data.int_parm = (unsigned long) qdio;
+	init_data.input_sbal_addr_array = input_sbals;
+	init_data.output_sbal_addr_array = output_sbals;
+	init_data.scan_threshold =
+		QDIO_MAX_BUFFERS_PER_Q - ZFCP_QDIO_MAX_SBALS_PER_REQ * 2;
 
-	if (qdio_establish(&init_data))
+	if (qdio_establish(cdev, &init_data))
 		goto failed_establish;
 
-	if (qdio_get_ssqd_desc(init_data.cdev, &ssqd))
+	if (qdio_get_ssqd_desc(cdev, &ssqd))
 		goto failed_qdio;
 
 	if (ssqd.qdioac2 & CHSC_AC2_DATA_DIV_ENABLED)
diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c
index 3910d52..13d873f 100644
--- a/drivers/s390/scsi/zfcp_scsi.c
+++ b/drivers/s390/scsi/zfcp_scsi.c
@@ -856,6 +856,10 @@ struct fc_function_template zfcp_transport_functions = {
 	.show_host_supported_speeds = 1,
 	.show_host_maxframe_size = 1,
 	.show_host_serial_number = 1,
+	.show_host_manufacturer = 1,
+	.show_host_model = 1,
+	.show_host_hardware_version = 1,
+	.show_host_firmware_version = 1,
 	.get_fc_host_stats = zfcp_scsi_get_fc_host_stats,
 	.reset_fc_host_stats = zfcp_scsi_reset_fc_host_stats,
 	.set_rport_dev_loss_tmo = zfcp_scsi_set_rport_dev_loss_tmo,
@@ -871,5 +875,6 @@ struct fc_function_template zfcp_transport_functions = {
 	.show_host_symbolic_name = 1,
 	.show_host_speed = 1,
 	.show_host_port_id = 1,
+	.show_host_fabric_name = 1,
 	.dd_bsg_size = sizeof(struct zfcp_fsf_ct_els),
 };
diff --git a/drivers/s390/scsi/zfcp_sysfs.c b/drivers/s390/scsi/zfcp_sysfs.c
index a711a0d..7ec30de 100644
--- a/drivers/s390/scsi/zfcp_sysfs.c
+++ b/drivers/s390/scsi/zfcp_sysfs.c
@@ -4,7 +4,7 @@
  *
  * sysfs attributes.
  *
- * Copyright IBM Corp. 2008, 2010
+ * Copyright IBM Corp. 2008, 2020
  */
 
 #define KMSG_COMPONENT "zfcp"
@@ -370,6 +370,42 @@ static ZFCP_DEV_ATTR(adapter, diag_max_age, 0644,
 		     zfcp_sysfs_adapter_diag_max_age_show,
 		     zfcp_sysfs_adapter_diag_max_age_store);
 
+static ssize_t zfcp_sysfs_adapter_fc_security_show(
+	struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct ccw_device *cdev = to_ccwdev(dev);
+	struct zfcp_adapter *adapter = zfcp_ccw_adapter_by_cdev(cdev);
+	unsigned int status;
+	int i;
+
+	if (!adapter)
+		return -ENODEV;
+
+	/*
+	 * Adapter status COMMON_OPEN implies xconf data and xport data
+	 * was done. Adapter FC Endpoint Security capability remains
+	 * unchanged in case of COMMON_ERP_FAILED (e.g. due to local link
+	 * down).
+	 */
+	status = atomic_read(&adapter->status);
+	if (0 == (status & ZFCP_STATUS_COMMON_OPEN))
+		i = sprintf(buf, "unknown\n");
+	else if (!(adapter->adapter_features & FSF_FEATURE_FC_SECURITY))
+		i = sprintf(buf, "unsupported\n");
+	else {
+		i = zfcp_fsf_scnprint_fc_security(
+			buf, PAGE_SIZE - 1, adapter->fc_security_algorithms,
+			ZFCP_FSF_PRINT_FMT_LIST);
+		i += scnprintf(buf + i, PAGE_SIZE - i, "\n");
+	}
+
+	zfcp_ccw_adapter_put(adapter);
+	return i;
+}
+static ZFCP_DEV_ATTR(adapter, fc_security, S_IRUGO,
+		     zfcp_sysfs_adapter_fc_security_show,
+		     NULL);
+
 static struct attribute *zfcp_adapter_attrs[] = {
 	&dev_attr_adapter_failed.attr,
 	&dev_attr_adapter_in_recovery.attr,
@@ -383,6 +419,7 @@ static struct attribute *zfcp_adapter_attrs[] = {
 	&dev_attr_adapter_status.attr,
 	&dev_attr_adapter_hardware_version.attr,
 	&dev_attr_adapter_diag_max_age.attr,
+	&dev_attr_adapter_fc_security.attr,
 	NULL
 };
 
@@ -426,6 +463,36 @@ static ssize_t zfcp_sysfs_unit_remove_store(struct device *dev,
 }
 static DEVICE_ATTR(unit_remove, S_IWUSR, NULL, zfcp_sysfs_unit_remove_store);
 
+static ssize_t zfcp_sysfs_port_fc_security_show(struct device *dev,
+						struct device_attribute *attr,
+						char *buf)
+{
+	struct zfcp_port *port = container_of(dev, struct zfcp_port, dev);
+	struct zfcp_adapter *adapter = port->adapter;
+	unsigned int status = atomic_read(&port->status);
+	int i;
+
+	if (0 == (status & ZFCP_STATUS_COMMON_OPEN) ||
+	    0 == (status & ZFCP_STATUS_COMMON_UNBLOCKED) ||
+	    0 == (status & ZFCP_STATUS_PORT_PHYS_OPEN) ||
+	    0 != (status & ZFCP_STATUS_COMMON_ERP_FAILED) ||
+	    0 != (status & ZFCP_STATUS_COMMON_ACCESS_BOXED))
+		i = sprintf(buf, "unknown\n");
+	else if (!(adapter->adapter_features & FSF_FEATURE_FC_SECURITY))
+		i = sprintf(buf, "unsupported\n");
+	else {
+		i = zfcp_fsf_scnprint_fc_security(
+			buf, PAGE_SIZE - 1, port->connection_info,
+			ZFCP_FSF_PRINT_FMT_SINGLEITEM);
+		i += scnprintf(buf + i, PAGE_SIZE - i, "\n");
+	}
+
+	return i;
+}
+static ZFCP_DEV_ATTR(port, fc_security, S_IRUGO,
+		     zfcp_sysfs_port_fc_security_show,
+		     NULL);
+
 static struct attribute *zfcp_port_attrs[] = {
 	&dev_attr_unit_add.attr,
 	&dev_attr_unit_remove.attr,
@@ -433,6 +500,7 @@ static struct attribute *zfcp_port_attrs[] = {
 	&dev_attr_port_in_recovery.attr,
 	&dev_attr_port_status.attr,
 	&dev_attr_port_access_denied.attr,
+	&dev_attr_port_fc_security.attr,
 	NULL
 };
 static struct attribute_group zfcp_port_attr_group = {
diff --git a/drivers/sbus/char/envctrl.c b/drivers/sbus/char/envctrl.c
index 12d66aa..843e830 100644
--- a/drivers/sbus/char/envctrl.c
+++ b/drivers/sbus/char/envctrl.c
@@ -37,8 +37,6 @@
 #define DRIVER_NAME	"envctrl"
 #define PFX		DRIVER_NAME ": "
 
-#define ENVCTRL_MINOR	162
-
 #define PCF8584_ADDRESS	0x55
 
 #define CONTROL_PIN	0x80
diff --git a/drivers/sbus/char/flash.c b/drivers/sbus/char/flash.c
index e85a05a..4147d22 100644
--- a/drivers/sbus/char/flash.c
+++ b/drivers/sbus/char/flash.c
@@ -31,8 +31,6 @@ static struct {
 	unsigned long busy;		/* In use? */
 } flash;
 
-#define FLASH_MINOR	152
-
 static int
 flash_mmap(struct file *file, struct vm_area_struct *vma)
 {
@@ -157,7 +155,7 @@ static const struct file_operations flash_fops = {
 	.release =	flash_release,
 };
 
-static struct miscdevice flash_dev = { FLASH_MINOR, "flash", &flash_fops };
+static struct miscdevice flash_dev = { SBUS_FLASH_MINOR, "flash", &flash_fops };
 
 static int flash_probe(struct platform_device *op)
 {
diff --git a/drivers/sbus/char/uctrl.c b/drivers/sbus/char/uctrl.c
index 7173a2e..37d252f2 100644
--- a/drivers/sbus/char/uctrl.c
+++ b/drivers/sbus/char/uctrl.c
@@ -23,8 +23,6 @@
 #include <asm/io.h>
 #include <asm/pgtable.h>
 
-#define UCTRL_MINOR	174
-
 #define DEBUG 1
 #ifdef DEBUG
 #define dprintk(x) printk x
diff --git a/drivers/scsi/.gitignore b/drivers/scsi/.gitignore
index e295674..5f65cb7 100644
--- a/drivers/scsi/.gitignore
+++ b/drivers/scsi/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 53c700_d.h
 scsi_devinfo_tbl.c
diff --git a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c
index 1862594..b5b3154 100644
--- a/drivers/scsi/BusLogic.c
+++ b/drivers/scsi/BusLogic.c
@@ -3654,7 +3654,7 @@ static bool __init blogic_parse(char **str, char *keyword)
   selected host adapter.
 
   The BusLogic Driver Probing Options are described in
-  <file:Documentation/scsi/BusLogic.txt>.
+  <file:Documentation/scsi/BusLogic.rst>.
 */
 
 static int __init blogic_parseopts(char *options)
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 1b6eaf8..17feff1 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -33,7 +33,7 @@
 	  Channel, and FireWire storage.
 
 	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/scsi/scsi.txt>.
+	  <file:Documentation/scsi/scsi.rst>.
 	  The module will be called scsi_mod.
 
 	  However, do not compile this as a module if your root file system
@@ -79,7 +79,7 @@
 	  CD-ROMs.
 
 	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/scsi/scsi.txt>.
+	  <file:Documentation/scsi/scsi.rst>.
 	  The module will be called sd_mod.
 
 	  Do not compile this driver as a module if your root file system
@@ -94,11 +94,11 @@
 	  If you want to use a SCSI tape drive under Linux, say Y and read the
 	  SCSI-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>, and
-	  <file:Documentation/scsi/st.txt> in the kernel source.  This is NOT
+	  <file:Documentation/scsi/st.rst> in the kernel source.  This is NOT
 	  for SCSI CD-ROMs.
 
 	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/scsi/scsi.txt>. The module will be called st.
+	  <file:Documentation/scsi/scsi.rst>. The module will be called st.
 
 config BLK_DEV_SR
 	tristate "SCSI CDROM support"
@@ -112,18 +112,9 @@
 	  Make sure to say Y or M to "ISO 9660 CD-ROM file system support".
 
 	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/scsi/scsi.txt>.
+	  <file:Documentation/scsi/scsi.rst>.
 	  The module will be called sr_mod.
 
-config BLK_DEV_SR_VENDOR
-	bool "Enable vendor-specific extensions (for SCSI CDROM)"
-	depends on BLK_DEV_SR
-	help
-	  This enables the usage of vendor specific SCSI commands. This is
-	  required to support multisession CDs with old NEC/TOSHIBA cdrom
-	  drives (and HP Writers). If you have such a drive and get the first
-	  session only, try saying Y here; everybody else says N.
-
 config CHR_DEV_SG
 	tristate "SCSI generic support"
 	depends on SCSI
@@ -142,10 +133,10 @@
 	  quality digital reader of audio CDs (<http://www.xiph.org/paranoia/>).
 	  For other devices, it's possible that you'll have to write the
 	  driver software yourself. Please read the file
-	  <file:Documentation/scsi/scsi-generic.txt> for more information.
+	  <file:Documentation/scsi/scsi-generic.rst> for more information.
 
 	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/scsi/scsi.txt>. The module will be called sg.
+	  <file:Documentation/scsi/scsi.rst>. The module will be called sg.
 
 	  If unsure, say N.
 
@@ -158,12 +149,12 @@
 	  don't need this for those tiny 6-slot cdrom changers.  Media
 	  changers are listed as "Type: Medium Changer" in /proc/scsi/scsi.
 	  If you have such hardware and want to use it with linux, say Y
-	  here.  Check <file:Documentation/scsi/scsi-changer.txt> for details.
+	  here.  Check <file:Documentation/scsi/scsi-changer.rst> for details.
 	
 	  If you want to compile this as a module ( = code which can be
 	  inserted in and removed from the running kernel whenever you want),
 	  say M here and read <file:Documentation/kbuild/modules.rst> and
-	  <file:Documentation/scsi/scsi.txt>. The module will be called ch.o.
+	  <file:Documentation/scsi/scsi.rst>. The module will be called ch.o.
 	  If unsure, say N.
 
 config SCSI_ENCLOSURE
@@ -392,7 +383,7 @@
 
 	  It is explained in section 3.3 of the SCSI-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>. You might also want to
-	  read the file <file:Documentation/scsi/aha152x.txt>.
+	  read the file <file:Documentation/scsi/aha152x.rst>.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called aha152x.
@@ -430,7 +421,7 @@
 	help
 	  This driver supports a variety of Dell, HP, Adaptec, IBM and
 	  ICP storage products. For a list of supported products, refer
-	  to <file:Documentation/scsi/aacraid.txt>.
+	  to <file:Documentation/scsi/aacraid.rst>.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called aacraid.
@@ -457,7 +448,7 @@
 	help
 	  This driver supports all of Adaptec's I2O based RAID controllers as 
 	  well as the DPT SmartRaid V cards.  This is an Adaptec maintained
-	  driver by Deanna Bonds.  See <file:Documentation/scsi/dpti.txt>.
+	  driver by Deanna Bonds.  See <file:Documentation/scsi/dpti.rst>.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called dpt_i2o.
@@ -511,8 +502,8 @@
 	  This is support for BusLogic MultiMaster and FlashPoint SCSI Host
 	  Adapters. Consult the SCSI-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>, and the files
-	  <file:Documentation/scsi/BusLogic.txt> and
-	  <file:Documentation/scsi/FlashPoint.txt> for more information.
+	  <file:Documentation/scsi/BusLogic.rst> and
+	  <file:Documentation/scsi/FlashPoint.rst> for more information.
 	  Note that support for FlashPoint is only available for 32-bit
 	  x86 configurations.
 
@@ -613,7 +604,7 @@
 	  This is support for the Cisco PCI-Express FCoE HBA.
 
 	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/scsi/scsi.txt>.
+	  <file:Documentation/scsi/scsi.rst>.
 	  The module will be called fnic.
 
 config SCSI_SNIC
@@ -623,7 +614,7 @@
 	  This is support for the Cisco PCI-Express SCSI HBA.
 
 	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/scsi/scsi.txt>.
+	  <file:Documentation/scsi/scsi.rst>.
 	  The module will be called snic.
 
 config SCSI_SNIC_DEBUG_FS
@@ -813,7 +804,7 @@
 	  newer drives)", below.
 
 	  For more information about this driver and how to use it you should
-	  read the file <file:Documentation/scsi/ppa.txt>.  You should also read
+	  read the file <file:Documentation/scsi/ppa.rst>.  You should also read
 	  the SCSI-HOWTO, which is available from
 	  <http://www.tldp.org/docs.html#howto>.  If you use this driver,
 	  you will still be able to use the parallel port for other tasks,
@@ -840,7 +831,7 @@
 	  here and Y to "IOMEGA Parallel Port (ppa - older drives)", above.
 
 	  For more information about this driver and how to use it you should
-	  read the file <file:Documentation/scsi/ppa.txt>.  You should also read
+	  read the file <file:Documentation/scsi/ppa.rst>.  You should also read
 	  the SCSI-HOWTO, which is available from
 	  <http://www.tldp.org/docs.html#howto>.  If you use this driver,
 	  you will still be able to use the parallel port for other tasks,
@@ -930,7 +921,7 @@
 	  language.  It does not support LSI53C10XX Ultra-320 PCI-X SCSI
 	  controllers; you need to use the Fusion MPT driver for that.
 
-	  Please read <file:Documentation/scsi/sym53c8xx_2.txt> for more
+	  Please read <file:Documentation/scsi/sym53c8xx_2.rst> for more
 	  information.
 
 config SCSI_SYM53C8XX_DMA_ADDRESSING_MODE
@@ -1127,7 +1118,7 @@
 	  SCSI support"), below.
 
 	  Information about this driver is contained in
-	  <file:Documentation/scsi/qlogicfas.txt>.  You should also read the
+	  <file:Documentation/scsi/qlogicfas.rst>.  You should also read the
 	  SCSI-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
@@ -1197,7 +1188,7 @@
 	  This driver works, but is still in experimental status. So better
 	  have a bootable disk and a backup in case of emergency.
 
-	  Documentation can be found in <file:Documentation/scsi/dc395x.txt>.
+	  Documentation can be found in <file:Documentation/scsi/dc395x.rst>.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called dc395x.
diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index 33dbc05..eb72ac8 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -798,6 +798,11 @@ static int aac_probe_container_callback1(struct scsi_cmnd * scsicmd)
 	return 0;
 }
 
+static void aac_probe_container_scsi_done(struct scsi_cmnd *scsi_cmnd)
+{
+	aac_probe_container_callback1(scsi_cmnd);
+}
+
 int aac_probe_container(struct aac_dev *dev, int cid)
 {
 	struct scsi_cmnd *scsicmd = kmalloc(sizeof(*scsicmd), GFP_KERNEL);
@@ -810,7 +815,7 @@ int aac_probe_container(struct aac_dev *dev, int cid)
 		return -ENOMEM;
 	}
 	scsicmd->list.next = NULL;
-	scsicmd->scsi_done = (void (*)(struct scsi_cmnd*))aac_probe_container_callback1;
+	scsicmd->scsi_done = aac_probe_container_scsi_done;
 
 	scsicmd->device = scsidev;
 	scsidev->sdev_state = 0;
@@ -2601,9 +2606,7 @@ static int aac_write(struct scsi_cmnd * scsicmd)
 static void synchronize_callback(void *context, struct fib *fibptr)
 {
 	struct aac_synchronize_reply *synchronizereply;
-	struct scsi_cmnd *cmd;
-
-	cmd = context;
+	struct scsi_cmnd *cmd = context;
 
 	if (!aac_valid_context(cmd, fibptr))
 		return;
@@ -2644,77 +2647,8 @@ static int aac_synchronize(struct scsi_cmnd *scsicmd)
 	int status;
 	struct fib *cmd_fibcontext;
 	struct aac_synchronize *synchronizecmd;
-	struct scsi_cmnd *cmd;
 	struct scsi_device *sdev = scsicmd->device;
-	int active = 0;
 	struct aac_dev *aac;
-	u64 lba = ((u64)scsicmd->cmnd[2] << 24) | (scsicmd->cmnd[3] << 16) |
-		(scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5];
-	u32 count = (scsicmd->cmnd[7] << 8) | scsicmd->cmnd[8];
-	unsigned long flags;
-
-	/*
-	 * Wait for all outstanding queued commands to complete to this
-	 * specific target (block).
-	 */
-	spin_lock_irqsave(&sdev->list_lock, flags);
-	list_for_each_entry(cmd, &sdev->cmd_list, list)
-		if (cmd->SCp.phase == AAC_OWNER_FIRMWARE) {
-			u64 cmnd_lba;
-			u32 cmnd_count;
-
-			if (cmd->cmnd[0] == WRITE_6) {
-				cmnd_lba = ((cmd->cmnd[1] & 0x1F) << 16) |
-					(cmd->cmnd[2] << 8) |
-					cmd->cmnd[3];
-				cmnd_count = cmd->cmnd[4];
-				if (cmnd_count == 0)
-					cmnd_count = 256;
-			} else if (cmd->cmnd[0] == WRITE_16) {
-				cmnd_lba = ((u64)cmd->cmnd[2] << 56) |
-					((u64)cmd->cmnd[3] << 48) |
-					((u64)cmd->cmnd[4] << 40) |
-					((u64)cmd->cmnd[5] << 32) |
-					((u64)cmd->cmnd[6] << 24) |
-					(cmd->cmnd[7] << 16) |
-					(cmd->cmnd[8] << 8) |
-					cmd->cmnd[9];
-				cmnd_count = (cmd->cmnd[10] << 24) |
-					(cmd->cmnd[11] << 16) |
-					(cmd->cmnd[12] << 8) |
-					cmd->cmnd[13];
-			} else if (cmd->cmnd[0] == WRITE_12) {
-				cmnd_lba = ((u64)cmd->cmnd[2] << 24) |
-					(cmd->cmnd[3] << 16) |
-					(cmd->cmnd[4] << 8) |
-					cmd->cmnd[5];
-				cmnd_count = (cmd->cmnd[6] << 24) |
-					(cmd->cmnd[7] << 16) |
-					(cmd->cmnd[8] << 8) |
-					cmd->cmnd[9];
-			} else if (cmd->cmnd[0] == WRITE_10) {
-				cmnd_lba = ((u64)cmd->cmnd[2] << 24) |
-					(cmd->cmnd[3] << 16) |
-					(cmd->cmnd[4] << 8) |
-					cmd->cmnd[5];
-				cmnd_count = (cmd->cmnd[7] << 8) |
-					cmd->cmnd[8];
-			} else
-				continue;
-			if (((cmnd_lba + cmnd_count) < lba) ||
-			  (count && ((lba + count) < cmnd_lba)))
-				continue;
-			++active;
-			break;
-		}
-
-	spin_unlock_irqrestore(&sdev->list_lock, flags);
-
-	/*
-	 *	Yield the processor (requeue for later)
-	 */
-	if (active)
-		return SCSI_MLQUEUE_DEVICE_BUSY;
 
 	aac = (struct aac_dev *)sdev->host->hostdata;
 	if (aac->in_reset)
@@ -2723,8 +2657,7 @@ static int aac_synchronize(struct scsi_cmnd *scsicmd)
 	/*
 	 *	Allocate and initialize a Fib
 	 */
-	if (!(cmd_fibcontext = aac_fib_alloc(aac)))
-		return SCSI_MLQUEUE_HOST_BUSY;
+	cmd_fibcontext = aac_fib_alloc_tag(aac, scsicmd);
 
 	aac_fib_init(cmd_fibcontext);
 
diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c
index f75878d..355b16f 100644
--- a/drivers/scsi/aacraid/comminit.c
+++ b/drivers/scsi/aacraid/comminit.c
@@ -272,36 +272,35 @@ static void aac_queue_init(struct aac_dev * dev, struct aac_queue * q, u32 *mem,
 	q->entries = qsize;
 }
 
+static bool wait_for_io_iter(struct scsi_cmnd *cmd, void *data, bool rsvd)
+{
+	int *active = data;
+
+	if (cmd->SCp.phase == AAC_OWNER_FIRMWARE)
+		*active = *active + 1;
+	return true;
+}
 static void aac_wait_for_io_completion(struct aac_dev *aac)
 {
-	unsigned long flagv = 0;
-	int i = 0;
+	int i = 0, active;
 
 	for (i = 60; i; --i) {
-		struct scsi_device *dev;
-		struct scsi_cmnd *command;
-		int active = 0;
 
-		__shost_for_each_device(dev, aac->scsi_host_ptr) {
-			spin_lock_irqsave(&dev->list_lock, flagv);
-			list_for_each_entry(command, &dev->cmd_list, list) {
-				if (command->SCp.phase == AAC_OWNER_FIRMWARE) {
-					active++;
-					break;
-				}
-			}
-			spin_unlock_irqrestore(&dev->list_lock, flagv);
-			if (active)
-				break;
-
-		}
+		active = 0;
+		scsi_host_busy_iter(aac->scsi_host_ptr,
+				    wait_for_io_iter, &active);
 		/*
 		 * We can exit If all the commands are complete
 		 */
 		if (active == 0)
 			break;
+		dev_info(&aac->pdev->dev,
+			 "Wait for %d commands to complete\n", active);
 		ssleep(1);
 	}
+	if (active)
+		dev_err(&aac->pdev->dev,
+			"%d outstanding commands during shutdown\n", active);
 }
 
 /**
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index 5a8a999..ddd73f6 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -729,7 +729,7 @@ int aac_hba_send(u8 command, struct fib *fibptr, fib_callback callback,
 		hbacmd->request_id =
 			cpu_to_le32((((u32)(fibptr - dev->fibs)) << 2) + 1);
 		fibptr->flags |= FIB_CONTEXT_FLAG_SCSI_CMD;
-	} else if (command != HBA_IU_TYPE_SCSI_TM_REQ)
+	} else
 		return -EINVAL;
 
 
@@ -1476,10 +1476,7 @@ static int _aac_reset_adapter(struct aac_dev *aac, int forced, u8 reset_type)
 {
 	int index, quirks;
 	int retval;
-	struct Scsi_Host *host;
-	struct scsi_device *dev;
-	struct scsi_cmnd *command;
-	struct scsi_cmnd *command_list;
+	struct Scsi_Host *host = aac->scsi_host_ptr;
 	int jafo = 0;
 	int bled;
 	u64 dmamask;
@@ -1495,8 +1492,6 @@ static int _aac_reset_adapter(struct aac_dev *aac, int forced, u8 reset_type)
 	 *	- The card is dead, or will be very shortly ;-/ so no new
 	 *	  commands are completing in the interrupt service.
 	 */
-	host = aac->scsi_host_ptr;
-	scsi_block_requests(host);
 	aac_adapter_disable_int(aac);
 	if (aac->thread && aac->thread->pid != current->pid) {
 		spin_unlock_irq(host->host_lock);
@@ -1607,39 +1602,11 @@ static int _aac_reset_adapter(struct aac_dev *aac, int forced, u8 reset_type)
 	 * This is where the assumption that the Adapter is quiesced
 	 * is important.
 	 */
-	command_list = NULL;
-	__shost_for_each_device(dev, host) {
-		unsigned long flags;
-		spin_lock_irqsave(&dev->list_lock, flags);
-		list_for_each_entry(command, &dev->cmd_list, list)
-			if (command->SCp.phase == AAC_OWNER_FIRMWARE) {
-				command->SCp.buffer = (struct scatterlist *)command_list;
-				command_list = command;
-			}
-		spin_unlock_irqrestore(&dev->list_lock, flags);
-	}
-	while ((command = command_list)) {
-		command_list = (struct scsi_cmnd *)command->SCp.buffer;
-		command->SCp.buffer = NULL;
-		command->result = DID_OK << 16
-		  | COMMAND_COMPLETE << 8
-		  | SAM_STAT_TASK_SET_FULL;
-		command->SCp.phase = AAC_OWNER_ERROR_HANDLER;
-		command->scsi_done(command);
-	}
-	/*
-	 * Any Device that was already marked offline needs to be marked
-	 * running
-	 */
-	__shost_for_each_device(dev, host) {
-		if (!scsi_device_online(dev))
-			scsi_device_set_state(dev, SDEV_RUNNING);
-	}
-	retval = 0;
+	scsi_host_complete_all_commands(host, DID_RESET);
 
+	retval = 0;
 out:
 	aac->in_reset = 0;
-	scsi_unblock_requests(host);
 
 	/*
 	 * Issue bus rescan to catch any configuration that might have
@@ -1659,8 +1626,8 @@ static int _aac_reset_adapter(struct aac_dev *aac, int forced, u8 reset_type)
 int aac_reset_adapter(struct aac_dev *aac, int forced, u8 reset_type)
 {
 	unsigned long flagv = 0;
-	int retval;
-	struct Scsi_Host * host;
+	int retval, unblock_retval;
+	struct Scsi_Host *host = aac->scsi_host_ptr;
 	int bled;
 
 	if (spin_trylock_irqsave(&aac->fib_lock, flagv) == 0)
@@ -1678,8 +1645,7 @@ int aac_reset_adapter(struct aac_dev *aac, int forced, u8 reset_type)
 	 * target (block maximum 60 seconds). Although not necessary,
 	 * it does make us a good storage citizen.
 	 */
-	host = aac->scsi_host_ptr;
-	scsi_block_requests(host);
+	scsi_host_block(host);
 
 	/* Quiesce build, flush cache, write through mode */
 	if (forced < 2)
@@ -1690,6 +1656,9 @@ int aac_reset_adapter(struct aac_dev *aac, int forced, u8 reset_type)
 	retval = _aac_reset_adapter(aac, bled, reset_type);
 	spin_unlock_irqrestore(host->host_lock, flagv);
 
+	unblock_retval = scsi_host_unblock(host, SDEV_RUNNING);
+	if (!retval)
+		retval = unblock_retval;
 	if ((forced < 2) && (retval == -ENODEV)) {
 		/* Unwind aac_send_shutdown() IOP_RESET unsupported/disabled */
 		struct fib * fibctx = aac_fib_alloc(aac);
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 0443b74..83a60b0 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -623,54 +623,56 @@ static int aac_ioctl(struct scsi_device *sdev, unsigned int cmd,
 	return aac_do_ioctl(dev, cmd, arg);
 }
 
+struct fib_count_data {
+	int mlcnt;
+	int llcnt;
+	int ehcnt;
+	int fwcnt;
+	int krlcnt;
+};
+
+static bool fib_count_iter(struct scsi_cmnd *scmnd, void *data, bool reserved)
+{
+	struct fib_count_data *fib_count = data;
+
+	switch (scmnd->SCp.phase) {
+	case AAC_OWNER_FIRMWARE:
+		fib_count->fwcnt++;
+		break;
+	case AAC_OWNER_ERROR_HANDLER:
+		fib_count->ehcnt++;
+		break;
+	case AAC_OWNER_LOWLEVEL:
+		fib_count->llcnt++;
+		break;
+	case AAC_OWNER_MIDLEVEL:
+		fib_count->mlcnt++;
+		break;
+	default:
+		fib_count->krlcnt++;
+		break;
+	}
+	return true;
+}
+
+/* Called during SCSI EH, so we don't need to block requests */
 static int get_num_of_incomplete_fibs(struct aac_dev *aac)
 {
-
-	unsigned long flags;
-	struct scsi_device *sdev = NULL;
 	struct Scsi_Host *shost = aac->scsi_host_ptr;
-	struct scsi_cmnd *scmnd = NULL;
 	struct device *ctrl_dev;
+	struct fib_count_data fcnt = { };
 
-	int mlcnt  = 0;
-	int llcnt  = 0;
-	int ehcnt  = 0;
-	int fwcnt  = 0;
-	int krlcnt = 0;
-
-	__shost_for_each_device(sdev, shost) {
-		spin_lock_irqsave(&sdev->list_lock, flags);
-		list_for_each_entry(scmnd, &sdev->cmd_list, list) {
-			switch (scmnd->SCp.phase) {
-			case AAC_OWNER_FIRMWARE:
-				fwcnt++;
-				break;
-			case AAC_OWNER_ERROR_HANDLER:
-				ehcnt++;
-				break;
-			case AAC_OWNER_LOWLEVEL:
-				llcnt++;
-				break;
-			case AAC_OWNER_MIDLEVEL:
-				mlcnt++;
-				break;
-			default:
-				krlcnt++;
-				break;
-			}
-		}
-		spin_unlock_irqrestore(&sdev->list_lock, flags);
-	}
+	scsi_host_busy_iter(shost, fib_count_iter, &fcnt);
 
 	ctrl_dev = &aac->pdev->dev;
 
-	dev_info(ctrl_dev, "outstanding cmd: midlevel-%d\n", mlcnt);
-	dev_info(ctrl_dev, "outstanding cmd: lowlevel-%d\n", llcnt);
-	dev_info(ctrl_dev, "outstanding cmd: error handler-%d\n", ehcnt);
-	dev_info(ctrl_dev, "outstanding cmd: firmware-%d\n", fwcnt);
-	dev_info(ctrl_dev, "outstanding cmd: kernel-%d\n", krlcnt);
+	dev_info(ctrl_dev, "outstanding cmd: midlevel-%d\n", fcnt.mlcnt);
+	dev_info(ctrl_dev, "outstanding cmd: lowlevel-%d\n", fcnt.llcnt);
+	dev_info(ctrl_dev, "outstanding cmd: error handler-%d\n", fcnt.ehcnt);
+	dev_info(ctrl_dev, "outstanding cmd: firmware-%d\n", fcnt.fwcnt);
+	dev_info(ctrl_dev, "outstanding cmd: kernel-%d\n", fcnt.krlcnt);
 
-	return mlcnt + llcnt + ehcnt + fwcnt;
+	return fcnt.mlcnt + fcnt.llcnt + fcnt.ehcnt + fcnt.fwcnt;
 }
 
 static int aac_eh_abort(struct scsi_cmnd* cmd)
@@ -732,7 +734,11 @@ static int aac_eh_abort(struct scsi_cmnd* cmd)
 		status = aac_hba_send(HBA_IU_TYPE_SCSI_TM_REQ, fib,
 				  (fib_callback) aac_hba_callback,
 				  (void *) cmd);
-
+		if (status != -EINPROGRESS) {
+			aac_fib_complete(fib);
+			aac_fib_free(fib);
+			return ret;
+		}
 		/* Wait up to 15 secs for completion */
 		for (count = 0; count < 15; ++count) {
 			if (cmd->SCp.sent_command) {
@@ -911,11 +917,11 @@ static int aac_eh_dev_reset(struct scsi_cmnd *cmd)
 
 	info = &aac->hba_map[bus][cid];
 
-	if (info->devtype != AAC_DEVTYPE_NATIVE_RAW &&
-	    info->reset_state > 0)
+	if (!(info->devtype == AAC_DEVTYPE_NATIVE_RAW &&
+	 !(info->reset_state > 0)))
 		return FAILED;
 
-	pr_err("%s: Host adapter reset request. SCSI hang ?\n",
+	pr_err("%s: Host device reset request. SCSI hang ?\n",
 	       AAC_DRIVERNAME);
 
 	fib = aac_fib_alloc(aac);
@@ -930,7 +936,12 @@ static int aac_eh_dev_reset(struct scsi_cmnd *cmd)
 	status = aac_hba_send(command, fib,
 			      (fib_callback) aac_tmf_callback,
 			      (void *) info);
-
+	if (status != -EINPROGRESS) {
+		info->reset_state = 0;
+		aac_fib_complete(fib);
+		aac_fib_free(fib);
+		return ret;
+	}
 	/* Wait up to 15 seconds for completion */
 	for (count = 0; count < 15; ++count) {
 		if (info->reset_state == 0) {
@@ -969,11 +980,11 @@ static int aac_eh_target_reset(struct scsi_cmnd *cmd)
 
 	info = &aac->hba_map[bus][cid];
 
-	if (info->devtype != AAC_DEVTYPE_NATIVE_RAW &&
-	    info->reset_state > 0)
+	if (!(info->devtype == AAC_DEVTYPE_NATIVE_RAW &&
+	 !(info->reset_state > 0)))
 		return FAILED;
 
-	pr_err("%s: Host adapter reset request. SCSI hang ?\n",
+	pr_err("%s: Host target reset request. SCSI hang ?\n",
 	       AAC_DRIVERNAME);
 
 	fib = aac_fib_alloc(aac);
@@ -990,6 +1001,13 @@ static int aac_eh_target_reset(struct scsi_cmnd *cmd)
 			      (fib_callback) aac_tmf_callback,
 			      (void *) info);
 
+	if (status != -EINPROGRESS) {
+		info->reset_state = 0;
+		aac_fib_complete(fib);
+		aac_fib_free(fib);
+		return ret;
+	}
+
 	/* Wait up to 15 seconds for completion */
 	for (count = 0; count < 15; ++count) {
 		if (info->reset_state <= 0) {
@@ -1042,7 +1060,7 @@ static int aac_eh_bus_reset(struct scsi_cmnd* cmd)
 		}
 	}
 
-	pr_err("%s: Host adapter reset request. SCSI hang ?\n", AAC_DRIVERNAME);
+	pr_err("%s: Host bus reset request. SCSI hang ?\n", AAC_DRIVERNAME);
 
 	/*
 	 * Check the health of the controller
@@ -1270,20 +1288,21 @@ static ssize_t aac_show_flags(struct device *cdev,
 	if (nblank(dprintk(x)))
 		len = snprintf(buf, PAGE_SIZE, "dprintk\n");
 #ifdef AAC_DETAILED_STATUS_INFO
-	len += snprintf(buf + len, PAGE_SIZE - len,
-			"AAC_DETAILED_STATUS_INFO\n");
+	len += scnprintf(buf + len, PAGE_SIZE - len,
+			 "AAC_DETAILED_STATUS_INFO\n");
 #endif
 	if (dev->raw_io_interface && dev->raw_io_64)
-		len += snprintf(buf + len, PAGE_SIZE - len,
-				"SAI_READ_CAPACITY_16\n");
+		len += scnprintf(buf + len, PAGE_SIZE - len,
+				 "SAI_READ_CAPACITY_16\n");
 	if (dev->jbod)
-		len += snprintf(buf + len, PAGE_SIZE - len, "SUPPORTED_JBOD\n");
+		len += scnprintf(buf + len, PAGE_SIZE - len,
+				 "SUPPORTED_JBOD\n");
 	if (dev->supplement_adapter_info.supported_options2 &
 		AAC_OPTION_POWER_MANAGEMENT)
-		len += snprintf(buf + len, PAGE_SIZE - len,
-				"SUPPORTED_POWER_MANAGEMENT\n");
+		len += scnprintf(buf + len, PAGE_SIZE - len,
+				 "SUPPORTED_POWER_MANAGEMENT\n");
 	if (dev->msi)
-		len += snprintf(buf + len, PAGE_SIZE - len, "PCI_HAS_MSI\n");
+		len += scnprintf(buf + len, PAGE_SIZE - len, "PCI_HAS_MSI\n");
 	return len;
 }
 
@@ -1676,7 +1695,6 @@ static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	shost->irq = pdev->irq;
 	shost->unique_id = unique_id;
 	shost->max_cmd_len = 16;
-	shost->use_cmd_list = 1;
 
 	if (aac_cfg_major == AAC_CHARDEV_NEEDS_REINIT)
 		aac_init_char();
@@ -1895,7 +1913,7 @@ static int aac_suspend(struct pci_dev *pdev, pm_message_t state)
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
 	struct aac_dev *aac = (struct aac_dev *)shost->hostdata;
 
-	scsi_block_requests(shost);
+	scsi_host_block(shost);
 	aac_cancel_rescan_worker(aac);
 	aac_send_shutdown(aac);
 
@@ -1931,7 +1949,7 @@ static int aac_resume(struct pci_dev *pdev)
 	* aac_send_shutdown() to block ioctls from upperlayer
 	*/
 	aac->adapter_shutdown = 0;
-	scsi_unblock_requests(shost);
+	scsi_host_unblock(shost, SDEV_RUNNING);
 
 	return 0;
 
@@ -1946,7 +1964,8 @@ static int aac_resume(struct pci_dev *pdev)
 static void aac_shutdown(struct pci_dev *dev)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(dev);
-	scsi_block_requests(shost);
+
+	scsi_host_block(shost);
 	__aac_shutdown((struct aac_dev *)shost->hostdata);
 }
 
@@ -1978,26 +1997,6 @@ static void aac_remove_one(struct pci_dev *pdev)
 	}
 }
 
-static void aac_flush_ios(struct aac_dev *aac)
-{
-	int i;
-	struct scsi_cmnd *cmd;
-
-	for (i = 0; i < aac->scsi_host_ptr->can_queue; i++) {
-		cmd = (struct scsi_cmnd *)aac->fibs[i].callback_data;
-		if (cmd && (cmd->SCp.phase == AAC_OWNER_FIRMWARE)) {
-			scsi_dma_unmap(cmd);
-
-			if (aac->handle_pci_error)
-				cmd->result = DID_NO_CONNECT << 16;
-			else
-				cmd->result = DID_RESET << 16;
-
-			cmd->scsi_done(cmd);
-		}
-	}
-}
-
 static pci_ers_result_t aac_pci_error_detected(struct pci_dev *pdev,
 					enum pci_channel_state error)
 {
@@ -2012,9 +2011,9 @@ static pci_ers_result_t aac_pci_error_detected(struct pci_dev *pdev,
 	case pci_channel_io_frozen:
 		aac->handle_pci_error = 1;
 
-		scsi_block_requests(aac->scsi_host_ptr);
+		scsi_host_block(shost);
 		aac_cancel_rescan_worker(aac);
-		aac_flush_ios(aac);
+		scsi_host_complete_all_commands(shost, DID_NO_CONNECT);
 		aac_release_resources(aac);
 
 		pci_disable_pcie_error_reporting(pdev);
@@ -2024,7 +2023,7 @@ static pci_ers_result_t aac_pci_error_detected(struct pci_dev *pdev,
 	case pci_channel_io_perm_failure:
 		aac->handle_pci_error = 1;
 
-		aac_flush_ios(aac);
+		scsi_host_complete_all_commands(shost, DID_NO_CONNECT);
 		return PCI_ERS_RESULT_DISCONNECT;
 	}
 
@@ -2065,7 +2064,6 @@ static pci_ers_result_t aac_pci_slot_reset(struct pci_dev *pdev)
 static void aac_pci_resume(struct pci_dev *pdev)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
-	struct scsi_device *sdev = NULL;
 	struct aac_dev *aac = (struct aac_dev *)shost_priv(shost);
 
 	if (aac_adapter_ioremap(aac, aac->base_size)) {
@@ -2092,10 +2090,7 @@ static void aac_pci_resume(struct pci_dev *pdev)
 	aac->adapter_shutdown = 0;
 	aac->handle_pci_error = 0;
 
-	shost_for_each_device(sdev, shost)
-		if (sdev->sdev_state == SDEV_OFFLINE)
-			sdev->sdev_state = SDEV_RUNNING;
-	scsi_unblock_requests(aac->scsi_host_ptr);
+	scsi_host_unblock(shost, SDEV_RUNNING);
 	aac_scan_host(aac);
 	pci_save_state(pdev);
 
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index a242a62..c2c7850 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -316,7 +316,7 @@ typedef struct asc_sg_head {
 	ushort queue_cnt;
 	ushort entry_to_copy;
 	ushort res;
-	ASC_SG_LIST sg_list[0];
+	ASC_SG_LIST sg_list[];
 } ASC_SG_HEAD;
 
 typedef struct asc_scsi_q {
diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c
index eb466c2..90f97df 100644
--- a/drivers/scsi/aha152x.c
+++ b/drivers/scsi/aha152x.c
@@ -220,7 +220,7 @@
  *
  **************************************************************************
 
- see Documentation/scsi/aha152x.txt for configuration details
+ see Documentation/scsi/aha152x.rst for configuration details
 
  **************************************************************************/
 
@@ -1249,7 +1249,7 @@ static int aha152x_biosparam(struct scsi_device *sdev, struct block_device *bdev
 				       "aha152x: unable to verify geometry for disk with >1GB.\n"
 				       "         Using default translation. Please verify yourself.\n"
 				       "         Perhaps you need to enable extended translation in the driver.\n"
-				       "         See Documentation/scsi/aha152x.txt for details.\n");
+				       "         See Documentation/scsi/aha152x.rst for details.\n");
 			}
 		} else {
 			info_array[0] = info[0];
diff --git a/drivers/scsi/aha1740.c b/drivers/scsi/aha1740.c
index da4150c..5a227c0 100644
--- a/drivers/scsi/aha1740.c
+++ b/drivers/scsi/aha1740.c
@@ -592,7 +592,6 @@ static int aha1740_probe (struct device *dev)
 					     DMA_BIDIRECTIONAL);
 	if (!host->ecb_dma_addr) {
 		printk (KERN_ERR "aha1740_probe: Couldn't map ECB, giving up\n");
-		scsi_host_put (shpnt);
 		goto err_host_put;
 	}
 	
diff --git a/drivers/scsi/aic7xxx/.gitignore b/drivers/scsi/aic7xxx/.gitignore
index b8ee24d..9aa7802 100644
--- a/drivers/scsi/aic7xxx/.gitignore
+++ b/drivers/scsi/aic7xxx/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 aic79xx_reg.h
 aic79xx_reg_print.c
 aic79xx_seq.h
diff --git a/drivers/scsi/aic7xxx/Kconfig.aic79xx b/drivers/scsi/aic7xxx/Kconfig.aic79xx
index 16743fb..d4c50b8 100644
--- a/drivers/scsi/aic7xxx/Kconfig.aic79xx
+++ b/drivers/scsi/aic7xxx/Kconfig.aic79xx
@@ -32,7 +32,7 @@
 	on some devices.  The upper bound is 253.  0 disables tagged queueing.
 
 	Per device tag depth can be controlled via the kernel command line
-	"tag_info" option.  See Documentation/scsi/aic79xx.txt for details.
+	"tag_info" option.  See Documentation/scsi/aic79xx.rst for details.
 
 config AIC79XX_RESET_DELAY_MS
 	int "Initial bus reset delay in milli-seconds"
diff --git a/drivers/scsi/aic7xxx/Kconfig.aic7xxx b/drivers/scsi/aic7xxx/Kconfig.aic7xxx
index 3546b8c..9d02754 100644
--- a/drivers/scsi/aic7xxx/Kconfig.aic7xxx
+++ b/drivers/scsi/aic7xxx/Kconfig.aic7xxx
@@ -37,7 +37,7 @@
 	on some devices.  The upper bound is 253.  0 disables tagged queueing.
 
 	Per device tag depth can be controlled via the kernel command line
-	"tag_info" option.  See Documentation/scsi/aic7xxx.txt for details.
+	"tag_info" option.  See Documentation/scsi/aic7xxx.rst for details.
 
 config AIC7XXX_RESET_DELAY_MS
 	int "Initial bus reset delay in milli-seconds"
diff --git a/drivers/scsi/aic7xxx/aic79xx_core.c b/drivers/scsi/aic7xxx/aic79xx_core.c
index 7e5044b..a336a45 100644
--- a/drivers/scsi/aic7xxx/aic79xx_core.c
+++ b/drivers/scsi/aic7xxx/aic79xx_core.c
@@ -3107,19 +3107,6 @@ ahd_handle_nonpkt_busfree(struct ahd_softc *ahd)
 			printerror = 0;
 		} else if (ahd_sent_msg(ahd, AHDMSG_1B,
 					MSG_BUS_DEV_RESET, TRUE)) {
-#ifdef __FreeBSD__
-			/*
-			 * Don't mark the user's request for this BDR
-			 * as completing with CAM_BDR_SENT.  CAM3
-			 * specifies CAM_REQ_CMP.
-			 */
-			if (scb != NULL
-			 && scb->io_ctx->ccb_h.func_code== XPT_RESET_DEV
-			 && ahd_match_scb(ahd, scb, target, 'A',
-					  CAM_LUN_WILDCARD, SCB_LIST_NULL,
-					  ROLE_INITIATOR))
-				ahd_set_transaction_status(scb, CAM_REQ_CMP);
-#endif
 			ahd_handle_devreset(ahd, &devinfo, CAM_LUN_WILDCARD,
 					    CAM_BDR_SENT, "Bus Device Reset",
 					    /*verbose_level*/0);
@@ -6067,22 +6054,17 @@ ahd_alloc(void *platform_arg, char *name)
 {
 	struct  ahd_softc *ahd;
 
-#ifndef	__FreeBSD__
 	ahd = kmalloc(sizeof(*ahd), GFP_ATOMIC);
 	if (!ahd) {
 		printk("aic7xxx: cannot malloc softc!\n");
 		kfree(name);
 		return NULL;
 	}
-#else
-	ahd = device_get_softc((device_t)platform_arg);
-#endif
+
 	memset(ahd, 0, sizeof(*ahd));
 	ahd->seep_config = kmalloc(sizeof(*ahd->seep_config), GFP_ATOMIC);
 	if (ahd->seep_config == NULL) {
-#ifndef	__FreeBSD__
 		kfree(ahd);
-#endif
 		kfree(name);
 		return (NULL);
 	}
@@ -6206,9 +6188,7 @@ ahd_free(struct ahd_softc *ahd)
 		kfree(ahd->seep_config);
 	if (ahd->saved_stack != NULL)
 		kfree(ahd->saved_stack);
-#ifndef __FreeBSD__
 	kfree(ahd);
-#endif
 	return;
 }
 
diff --git a/drivers/scsi/aic7xxx/aic7xxx_core.c b/drivers/scsi/aic7xxx/aic7xxx_core.c
index 4190a02..84fc499 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_core.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_core.c
@@ -1834,21 +1834,6 @@ ahc_handle_scsiint(struct ahc_softc *ahc, u_int intstat)
 				printerror = 0;
 			} else if (ahc_sent_msg(ahc, AHCMSG_1B,
 						MSG_BUS_DEV_RESET, TRUE)) {
-#ifdef __FreeBSD__
-				/*
-				 * Don't mark the user's request for this BDR
-				 * as completing with CAM_BDR_SENT.  CAM3
-				 * specifies CAM_REQ_CMP.
-				 */
-				if (scb != NULL
-				 && scb->io_ctx->ccb_h.func_code== XPT_RESET_DEV
-				 && ahc_match_scb(ahc, scb, target, channel,
-						  CAM_LUN_WILDCARD,
-						  SCB_LIST_NULL,
-						  ROLE_INITIATOR)) {
-					ahc_set_transaction_status(scb, CAM_REQ_CMP);
-				}
-#endif
 				ahc_compile_devinfo(&devinfo,
 						    initiator_role_id,
 						    target,
@@ -4399,22 +4384,16 @@ ahc_alloc(void *platform_arg, char *name)
 	struct  ahc_softc *ahc;
 	int	i;
 
-#ifndef	__FreeBSD__
 	ahc = kmalloc(sizeof(*ahc), GFP_ATOMIC);
 	if (!ahc) {
 		printk("aic7xxx: cannot malloc softc!\n");
 		kfree(name);
 		return NULL;
 	}
-#else
-	ahc = device_get_softc((device_t)platform_arg);
-#endif
 	memset(ahc, 0, sizeof(*ahc));
 	ahc->seep_config = kmalloc(sizeof(*ahc->seep_config), GFP_ATOMIC);
 	if (ahc->seep_config == NULL) {
-#ifndef	__FreeBSD__
 		kfree(ahc);
-#endif
 		kfree(name);
 		return (NULL);
 	}
@@ -4540,9 +4519,7 @@ ahc_free(struct ahc_softc *ahc)
 		kfree(ahc->name);
 	if (ahc->seep_config != NULL)
 		kfree(ahc->seep_config);
-#ifndef __FreeBSD__
 	kfree(ahc);
-#endif
 	return;
 }
 
diff --git a/drivers/scsi/arcmsr/arcmsr_attr.c b/drivers/scsi/arcmsr/arcmsr_attr.c
index 259d9c2..57be960 100644
--- a/drivers/scsi/arcmsr/arcmsr_attr.c
+++ b/drivers/scsi/arcmsr/arcmsr_attr.c
@@ -41,7 +41,7 @@
 ** THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *******************************************************************************
 ** For history of changes, see Documentation/scsi/ChangeLog.arcmsr
-**     Firmware Specification, see Documentation/scsi/arcmsr_spec.txt
+**     Firmware Specification, see Documentation/scsi/arcmsr_spec.rst
 *******************************************************************************
 */
 #include <linux/module.h>
diff --git a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c
index c2c79a37..30914c8 100644
--- a/drivers/scsi/arcmsr/arcmsr_hba.c
+++ b/drivers/scsi/arcmsr/arcmsr_hba.c
@@ -41,7 +41,7 @@
 ** THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *******************************************************************************
 ** For history of changes, see Documentation/scsi/ChangeLog.arcmsr
-**     Firmware Specification, see Documentation/scsi/arcmsr_spec.txt
+**     Firmware Specification, see Documentation/scsi/arcmsr_spec.rst
 *******************************************************************************
 */
 #include <linux/module.h>
diff --git a/drivers/scsi/be2iscsi/be_mgmt.c b/drivers/scsi/be2iscsi/be_mgmt.c
index d4febaa..a2d69b28 100644
--- a/drivers/scsi/be2iscsi/be_mgmt.c
+++ b/drivers/scsi/be2iscsi/be_mgmt.c
@@ -1178,12 +1178,12 @@ beiscsi_active_session_disp(struct device *dev, struct device_attribute *attr,
 		if (test_bit(ulp_num, (void *)&phba->fw_config.ulp_supported)) {
 			avlbl_cids = BEISCSI_ULP_AVLBL_CID(phba, ulp_num);
 			total_cids = BEISCSI_GET_CID_COUNT(phba, ulp_num);
-			len += snprintf(buf+len, PAGE_SIZE - len,
-					"ULP%d : %d\n", ulp_num,
-					(total_cids - avlbl_cids));
+			len += scnprintf(buf+len, PAGE_SIZE - len,
+					 "ULP%d : %d\n", ulp_num,
+					 (total_cids - avlbl_cids));
 		} else
-			len += snprintf(buf+len, PAGE_SIZE - len,
-					"ULP%d : %d\n", ulp_num, 0);
+			len += scnprintf(buf+len, PAGE_SIZE - len,
+					 "ULP%d : %d\n", ulp_num, 0);
 	}
 
 	return len;
@@ -1208,12 +1208,12 @@ beiscsi_free_session_disp(struct device *dev, struct device_attribute *attr,
 
 	for (ulp_num = 0; ulp_num < BEISCSI_ULP_COUNT; ulp_num++) {
 		if (test_bit(ulp_num, (void *)&phba->fw_config.ulp_supported))
-			len += snprintf(buf+len, PAGE_SIZE - len,
-					"ULP%d : %d\n", ulp_num,
-					BEISCSI_ULP_AVLBL_CID(phba, ulp_num));
+			len += scnprintf(buf+len, PAGE_SIZE - len,
+					 "ULP%d : %d\n", ulp_num,
+					 BEISCSI_ULP_AVLBL_CID(phba, ulp_num));
 		else
-			len += snprintf(buf+len, PAGE_SIZE - len,
-					"ULP%d : %d\n", ulp_num, 0);
+			len += scnprintf(buf+len, PAGE_SIZE - len,
+					 "ULP%d : %d\n", ulp_num, 0);
 	}
 
 	return len;
diff --git a/drivers/scsi/bnx2fc/bnx2fc.h b/drivers/scsi/bnx2fc/bnx2fc.h
index 3b84db8..b6e8ed7 100644
--- a/drivers/scsi/bnx2fc/bnx2fc.h
+++ b/drivers/scsi/bnx2fc/bnx2fc.h
@@ -66,7 +66,7 @@
 #include "bnx2fc_constants.h"
 
 #define BNX2FC_NAME		"bnx2fc"
-#define BNX2FC_VERSION		"2.12.10"
+#define BNX2FC_VERSION		"2.12.13"
 
 #define PFX			"bnx2fc: "
 
@@ -482,7 +482,10 @@ struct io_bdt {
 struct bnx2fc_work {
 	struct list_head list;
 	struct bnx2fc_rport *tgt;
+	struct fcoe_task_ctx_entry *task;
+	unsigned char rq_data[BNX2FC_RQ_BUF_SZ];
 	u16 wqe;
+	u8 num_rq;
 };
 struct bnx2fc_unsol_els {
 	struct fc_lport *lport;
@@ -550,7 +553,7 @@ void bnx2fc_rport_event_handler(struct fc_lport *lport,
 				enum fc_rport_event event);
 void bnx2fc_process_scsi_cmd_compl(struct bnx2fc_cmd *io_req,
 				   struct fcoe_task_ctx_entry *task,
-				   u8 num_rq);
+				   u8 num_rq, unsigned char *rq_data);
 void bnx2fc_process_cleanup_compl(struct bnx2fc_cmd *io_req,
 			       struct fcoe_task_ctx_entry *task,
 			       u8 num_rq);
@@ -559,7 +562,7 @@ void bnx2fc_process_abts_compl(struct bnx2fc_cmd *io_req,
 			       u8 num_rq);
 void bnx2fc_process_tm_compl(struct bnx2fc_cmd *io_req,
 			     struct fcoe_task_ctx_entry *task,
-			     u8 num_rq);
+			     u8 num_rq, unsigned char *rq_data);
 void bnx2fc_process_els_compl(struct bnx2fc_cmd *els_req,
 			      struct fcoe_task_ctx_entry *task,
 			      u8 num_rq);
@@ -577,7 +580,9 @@ struct fc_seq *bnx2fc_elsct_send(struct fc_lport *lport, u32 did,
 				      void *arg, u32 timeout);
 void bnx2fc_arm_cq(struct bnx2fc_rport *tgt);
 int bnx2fc_process_new_cqes(struct bnx2fc_rport *tgt);
-void bnx2fc_process_cq_compl(struct bnx2fc_rport *tgt, u16 wqe);
+void bnx2fc_process_cq_compl(struct bnx2fc_rport *tgt, u16 wqe,
+			     unsigned char *rq_data, u8 num_rq,
+			     struct fcoe_task_ctx_entry *task);
 struct bnx2fc_rport *bnx2fc_tgt_lookup(struct fcoe_port *port,
 					     u32 port_id);
 void bnx2fc_process_l2_frame_compl(struct bnx2fc_rport *tgt,
diff --git a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
index b4bfab5..1cbb431 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
@@ -660,7 +660,10 @@ static int bnx2fc_percpu_io_thread(void *arg)
 
 			list_for_each_entry_safe(work, tmp, &work_list, list) {
 				list_del_init(&work->list);
-				bnx2fc_process_cq_compl(work->tgt, work->wqe);
+				bnx2fc_process_cq_compl(work->tgt, work->wqe,
+							work->rq_data,
+							work->num_rq,
+							work->task);
 				kfree(work);
 			}
 
@@ -2655,7 +2658,8 @@ static int bnx2fc_cpu_offline(unsigned int cpu)
 	/* Free all work in the list */
 	list_for_each_entry_safe(work, tmp, &p->work_list, list) {
 		list_del_init(&work->list);
-		bnx2fc_process_cq_compl(work->tgt, work->wqe);
+		bnx2fc_process_cq_compl(work->tgt, work->wqe, work->rq_data,
+					work->num_rq, work->task);
 		kfree(work);
 	}
 
diff --git a/drivers/scsi/bnx2fc/bnx2fc_hwi.c b/drivers/scsi/bnx2fc/bnx2fc_hwi.c
index 6f8335d..1f7c58b 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_hwi.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_hwi.c
@@ -863,36 +863,22 @@ static void bnx2fc_process_unsol_compl(struct bnx2fc_rport *tgt, u16 wqe)
 	}
 }
 
-void bnx2fc_process_cq_compl(struct bnx2fc_rport *tgt, u16 wqe)
+void bnx2fc_process_cq_compl(struct bnx2fc_rport *tgt, u16 wqe,
+			     unsigned char *rq_data, u8 num_rq,
+			     struct fcoe_task_ctx_entry *task)
 {
-	struct fcoe_task_ctx_entry *task;
-	struct fcoe_task_ctx_entry *task_page;
 	struct fcoe_port *port = tgt->port;
 	struct bnx2fc_interface *interface = port->priv;
 	struct bnx2fc_hba *hba = interface->hba;
 	struct bnx2fc_cmd *io_req;
-	int task_idx, index;
+
 	u16 xid;
 	u8  cmd_type;
 	u8 rx_state = 0;
-	u8 num_rq;
 
 	spin_lock_bh(&tgt->tgt_lock);
+
 	xid = wqe & FCOE_PEND_WQ_CQE_TASK_ID;
-	if (xid >= hba->max_tasks) {
-		printk(KERN_ERR PFX "ERROR:xid out of range\n");
-		spin_unlock_bh(&tgt->tgt_lock);
-		return;
-	}
-	task_idx = xid / BNX2FC_TASKS_PER_PAGE;
-	index = xid % BNX2FC_TASKS_PER_PAGE;
-	task_page = (struct fcoe_task_ctx_entry *)hba->task_ctx[task_idx];
-	task = &(task_page[index]);
-
-	num_rq = ((task->rxwr_txrd.var_ctx.rx_flags &
-		   FCOE_TCE_RX_WR_TX_RD_VAR_NUM_RQ_WQE) >>
-		   FCOE_TCE_RX_WR_TX_RD_VAR_NUM_RQ_WQE_SHIFT);
-
 	io_req = (struct bnx2fc_cmd *)hba->cmd_mgr->cmds[xid];
 
 	if (io_req == NULL) {
@@ -912,7 +898,8 @@ void bnx2fc_process_cq_compl(struct bnx2fc_rport *tgt, u16 wqe)
 	switch (cmd_type) {
 	case BNX2FC_SCSI_CMD:
 		if (rx_state == FCOE_TASK_RX_STATE_COMPLETED) {
-			bnx2fc_process_scsi_cmd_compl(io_req, task, num_rq);
+			bnx2fc_process_scsi_cmd_compl(io_req, task, num_rq,
+						      rq_data);
 			spin_unlock_bh(&tgt->tgt_lock);
 			return;
 		}
@@ -929,7 +916,7 @@ void bnx2fc_process_cq_compl(struct bnx2fc_rport *tgt, u16 wqe)
 
 	case BNX2FC_TASK_MGMT_CMD:
 		BNX2FC_IO_DBG(io_req, "Processing TM complete\n");
-		bnx2fc_process_tm_compl(io_req, task, num_rq);
+		bnx2fc_process_tm_compl(io_req, task, num_rq, rq_data);
 		break;
 
 	case BNX2FC_ABTS:
@@ -987,7 +974,9 @@ void bnx2fc_arm_cq(struct bnx2fc_rport *tgt)
 
 }
 
-static struct bnx2fc_work *bnx2fc_alloc_work(struct bnx2fc_rport *tgt, u16 wqe)
+static struct bnx2fc_work *bnx2fc_alloc_work(struct bnx2fc_rport *tgt, u16 wqe,
+					     unsigned char *rq_data, u8 num_rq,
+					     struct fcoe_task_ctx_entry *task)
 {
 	struct bnx2fc_work *work;
 	work = kzalloc(sizeof(struct bnx2fc_work), GFP_ATOMIC);
@@ -997,29 +986,87 @@ static struct bnx2fc_work *bnx2fc_alloc_work(struct bnx2fc_rport *tgt, u16 wqe)
 	INIT_LIST_HEAD(&work->list);
 	work->tgt = tgt;
 	work->wqe = wqe;
+	work->num_rq = num_rq;
+	work->task = task;
+	if (rq_data)
+		memcpy(work->rq_data, rq_data, BNX2FC_RQ_BUF_SZ);
+
 	return work;
 }
 
 /* Pending work request completion */
-static void bnx2fc_pending_work(struct bnx2fc_rport *tgt, unsigned int wqe)
+static bool bnx2fc_pending_work(struct bnx2fc_rport *tgt, unsigned int wqe)
 {
 	unsigned int cpu = wqe % num_possible_cpus();
 	struct bnx2fc_percpu_s *fps;
 	struct bnx2fc_work *work;
+	struct fcoe_task_ctx_entry *task;
+	struct fcoe_task_ctx_entry *task_page;
+	struct fcoe_port *port = tgt->port;
+	struct bnx2fc_interface *interface = port->priv;
+	struct bnx2fc_hba *hba = interface->hba;
+	unsigned char *rq_data = NULL;
+	unsigned char rq_data_buff[BNX2FC_RQ_BUF_SZ];
+	int task_idx, index;
+	unsigned char *dummy;
+	u16 xid;
+	u8 num_rq;
+	int i;
+
+	xid = wqe & FCOE_PEND_WQ_CQE_TASK_ID;
+	if (xid >= hba->max_tasks) {
+		pr_err(PFX "ERROR:xid out of range\n");
+		return false;
+	}
+
+	task_idx = xid / BNX2FC_TASKS_PER_PAGE;
+	index = xid % BNX2FC_TASKS_PER_PAGE;
+	task_page = (struct fcoe_task_ctx_entry *)hba->task_ctx[task_idx];
+	task = &task_page[index];
+
+	num_rq = ((task->rxwr_txrd.var_ctx.rx_flags &
+		   FCOE_TCE_RX_WR_TX_RD_VAR_NUM_RQ_WQE) >>
+		  FCOE_TCE_RX_WR_TX_RD_VAR_NUM_RQ_WQE_SHIFT);
+
+	memset(rq_data_buff, 0, BNX2FC_RQ_BUF_SZ);
+
+	if (!num_rq)
+		goto num_rq_zero;
+
+	rq_data = bnx2fc_get_next_rqe(tgt, 1);
+
+	if (num_rq > 1) {
+		/* We do not need extra sense data */
+		for (i = 1; i < num_rq; i++)
+			dummy = bnx2fc_get_next_rqe(tgt, 1);
+	}
+
+	if (rq_data)
+		memcpy(rq_data_buff, rq_data, BNX2FC_RQ_BUF_SZ);
+
+	/* return RQ entries */
+	for (i = 0; i < num_rq; i++)
+		bnx2fc_return_rqe(tgt, 1);
+
+num_rq_zero:
 
 	fps = &per_cpu(bnx2fc_percpu, cpu);
 	spin_lock_bh(&fps->fp_work_lock);
 	if (fps->iothread) {
-		work = bnx2fc_alloc_work(tgt, wqe);
+		work = bnx2fc_alloc_work(tgt, wqe, rq_data_buff,
+					 num_rq, task);
 		if (work) {
 			list_add_tail(&work->list, &fps->work_list);
 			wake_up_process(fps->iothread);
 			spin_unlock_bh(&fps->fp_work_lock);
-			return;
+			return true;
 		}
 	}
 	spin_unlock_bh(&fps->fp_work_lock);
-	bnx2fc_process_cq_compl(tgt, wqe);
+	bnx2fc_process_cq_compl(tgt, wqe,
+				rq_data_buff, num_rq, task);
+
+	return true;
 }
 
 int bnx2fc_process_new_cqes(struct bnx2fc_rport *tgt)
@@ -1056,8 +1103,8 @@ int bnx2fc_process_new_cqes(struct bnx2fc_rport *tgt)
 			/* Unsolicited event notification */
 			bnx2fc_process_unsol_compl(tgt, wqe);
 		} else {
-			bnx2fc_pending_work(tgt, wqe);
-			num_free_sqes++;
+			if (bnx2fc_pending_work(tgt, wqe))
+				num_free_sqes++;
 		}
 		cqe++;
 		tgt->cq_cons_idx++;
diff --git a/drivers/scsi/bnx2fc/bnx2fc_io.c b/drivers/scsi/bnx2fc/bnx2fc_io.c
index 4c8122a..2b070f0 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_io.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_io.c
@@ -24,7 +24,7 @@ static void bnx2fc_unmap_sg_list(struct bnx2fc_cmd *io_req);
 static void bnx2fc_free_mp_resc(struct bnx2fc_cmd *io_req);
 static void bnx2fc_parse_fcp_rsp(struct bnx2fc_cmd *io_req,
 				 struct fcoe_fcp_rsp_payload *fcp_rsp,
-				 u8 num_rq);
+				 u8 num_rq, unsigned char *rq_data);
 
 void bnx2fc_cmd_timer_set(struct bnx2fc_cmd *io_req,
 			  unsigned int timer_msec)
@@ -1518,7 +1518,8 @@ static void bnx2fc_tgt_reset_cmpl(struct bnx2fc_cmd *io_req)
 }
 
 void bnx2fc_process_tm_compl(struct bnx2fc_cmd *io_req,
-			     struct fcoe_task_ctx_entry *task, u8 num_rq)
+			     struct fcoe_task_ctx_entry *task, u8 num_rq,
+				  unsigned char *rq_data)
 {
 	struct bnx2fc_mp_req *tm_req;
 	struct fc_frame_header *fc_hdr;
@@ -1557,7 +1558,7 @@ void bnx2fc_process_tm_compl(struct bnx2fc_cmd *io_req,
 	if (fc_hdr->fh_r_ctl == FC_RCTL_DD_CMD_STATUS) {
 		bnx2fc_parse_fcp_rsp(io_req,
 				     (struct fcoe_fcp_rsp_payload *)
-				     rsp_buf, num_rq);
+				     rsp_buf, num_rq, rq_data);
 		if (io_req->fcp_rsp_code == 0) {
 			/* TM successful */
 			if (tm_req->tm_flags & FCP_TMF_LUN_RESET)
@@ -1755,15 +1756,11 @@ void bnx2fc_build_fcp_cmnd(struct bnx2fc_cmd *io_req,
 
 static void bnx2fc_parse_fcp_rsp(struct bnx2fc_cmd *io_req,
 				 struct fcoe_fcp_rsp_payload *fcp_rsp,
-				 u8 num_rq)
+				 u8 num_rq, unsigned char *rq_data)
 {
 	struct scsi_cmnd *sc_cmd = io_req->sc_cmd;
-	struct bnx2fc_rport *tgt = io_req->tgt;
 	u8 rsp_flags = fcp_rsp->fcp_flags.flags;
 	u32 rq_buff_len = 0;
-	int i;
-	unsigned char *rq_data;
-	unsigned char *dummy;
 	int fcp_sns_len = 0;
 	int fcp_rsp_len = 0;
 
@@ -1809,14 +1806,6 @@ static void bnx2fc_parse_fcp_rsp(struct bnx2fc_cmd *io_req,
 			rq_buff_len =  num_rq * BNX2FC_RQ_BUF_SZ;
 		}
 
-		rq_data = bnx2fc_get_next_rqe(tgt, 1);
-
-		if (num_rq > 1) {
-			/* We do not need extra sense data */
-			for (i = 1; i < num_rq; i++)
-				dummy = bnx2fc_get_next_rqe(tgt, 1);
-		}
-
 		/* fetch fcp_rsp_code */
 		if ((fcp_rsp_len == 4) || (fcp_rsp_len == 8)) {
 			/* Only for task management function */
@@ -1837,9 +1826,6 @@ static void bnx2fc_parse_fcp_rsp(struct bnx2fc_cmd *io_req,
 		if (fcp_sns_len)
 			memcpy(sc_cmd->sense_buffer, rq_data, fcp_sns_len);
 
-		/* return RQ entries */
-		for (i = 0; i < num_rq; i++)
-			bnx2fc_return_rqe(tgt, 1);
 	}
 }
 
@@ -1918,7 +1904,7 @@ int bnx2fc_queuecommand(struct Scsi_Host *host,
 
 void bnx2fc_process_scsi_cmd_compl(struct bnx2fc_cmd *io_req,
 				   struct fcoe_task_ctx_entry *task,
-				   u8 num_rq)
+				   u8 num_rq, unsigned char *rq_data)
 {
 	struct fcoe_fcp_rsp_payload *fcp_rsp;
 	struct bnx2fc_rport *tgt = io_req->tgt;
@@ -1931,6 +1917,12 @@ void bnx2fc_process_scsi_cmd_compl(struct bnx2fc_cmd *io_req,
 		/* we will not receive ABTS response for this IO */
 		BNX2FC_IO_DBG(io_req, "Timer context finished processing "
 			   "this scsi cmd\n");
+		if (test_and_clear_bit(BNX2FC_FLAG_IO_CLEANUP,
+				       &io_req->req_flags)) {
+			BNX2FC_IO_DBG(io_req,
+				      "Actual completion after cleanup request cleaning up\n");
+			bnx2fc_process_cleanup_compl(io_req, task, num_rq);
+		}
 		return;
 	}
 
@@ -1950,7 +1942,7 @@ void bnx2fc_process_scsi_cmd_compl(struct bnx2fc_cmd *io_req,
 		   &(task->rxwr_only.union_ctx.comp_info.fcp_rsp.payload);
 
 	/* parse fcp_rsp and obtain sense data from RQ if available */
-	bnx2fc_parse_fcp_rsp(io_req, fcp_rsp, num_rq);
+	bnx2fc_parse_fcp_rsp(io_req, fcp_rsp, num_rq, rq_data);
 
 	if (!sc_cmd->SCp.ptr) {
 		printk(KERN_ERR PFX "SCp.ptr is NULL\n");
diff --git a/drivers/scsi/ch.c b/drivers/scsi/ch.c
index ed5f4a6..cb74ab1 100644
--- a/drivers/scsi/ch.c
+++ b/drivers/scsi/ch.c
@@ -44,7 +44,6 @@ MODULE_LICENSE("GPL");
 MODULE_ALIAS_CHARDEV_MAJOR(SCSI_CHANGER_MAJOR);
 MODULE_ALIAS_SCSI_DEVICE(TYPE_MEDIUM_CHANGER);
 
-static DEFINE_MUTEX(ch_mutex);
 static int init = 1;
 module_param(init, int, 0444);
 MODULE_PARM_DESC(init, \
@@ -569,6 +568,7 @@ static void ch_destroy(struct kref *ref)
 {
 	scsi_changer *ch = container_of(ref, scsi_changer, ref);
 
+	ch->device = NULL;
 	kfree(ch->dt);
 	kfree(ch);
 }
@@ -590,20 +590,22 @@ ch_open(struct inode *inode, struct file *file)
 	scsi_changer *ch;
 	int minor = iminor(inode);
 
-	mutex_lock(&ch_mutex);
 	spin_lock(&ch_index_lock);
 	ch = idr_find(&ch_index_idr, minor);
 
-	if (NULL == ch || scsi_device_get(ch->device)) {
+	if (ch == NULL || !kref_get_unless_zero(&ch->ref)) {
 		spin_unlock(&ch_index_lock);
-		mutex_unlock(&ch_mutex);
 		return -ENXIO;
 	}
-	kref_get(&ch->ref);
 	spin_unlock(&ch_index_lock);
-
+	if (scsi_device_get(ch->device)) {
+		kref_put(&ch->ref, ch_destroy);
+		return -ENXIO;
+	}
+	/* Synchronize with ch_probe() */
+	mutex_lock(&ch->lock);
 	file->private_data = ch;
-	mutex_unlock(&ch_mutex);
+	mutex_unlock(&ch->lock);
 	return 0;
 }
 
@@ -938,7 +940,16 @@ static int ch_probe(struct device *dev)
 
 	ch->minor = ret;
 	sprintf(ch->name,"ch%d",ch->minor);
+	ret = scsi_device_get(sd);
+	if (ret) {
+		sdev_printk(KERN_WARNING, sd, "ch%d: failed to get device\n",
+			    ch->minor);
+		goto remove_idr;
+	}
 
+	mutex_init(&ch->lock);
+	kref_init(&ch->ref);
+	ch->device = sd;
 	class_dev = device_create(ch_sysfs_class, dev,
 				  MKDEV(SCSI_CHANGER_MAJOR, ch->minor), ch,
 				  "s%s", ch->name);
@@ -946,24 +957,27 @@ static int ch_probe(struct device *dev)
 		sdev_printk(KERN_WARNING, sd, "ch%d: device_create failed\n",
 			    ch->minor);
 		ret = PTR_ERR(class_dev);
-		goto remove_idr;
+		goto put_device;
 	}
 
-	mutex_init(&ch->lock);
-	kref_init(&ch->ref);
-	ch->device = sd;
+	mutex_lock(&ch->lock);
 	ret = ch_readconfig(ch);
-	if (ret)
+	if (ret) {
+		mutex_unlock(&ch->lock);
 		goto destroy_dev;
+	}
 	if (init)
 		ch_init_elem(ch);
 
+	mutex_unlock(&ch->lock);
 	dev_set_drvdata(dev, ch);
 	sdev_printk(KERN_INFO, sd, "Attached scsi changer %s\n", ch->name);
 
 	return 0;
 destroy_dev:
 	device_destroy(ch_sysfs_class, MKDEV(SCSI_CHANGER_MAJOR, ch->minor));
+put_device:
+	scsi_device_put(sd);
 remove_idr:
 	idr_remove(&ch_index_idr, ch->minor);
 free_ch:
@@ -977,9 +991,11 @@ static int ch_remove(struct device *dev)
 
 	spin_lock(&ch_index_lock);
 	idr_remove(&ch_index_idr, ch->minor);
+	dev_set_drvdata(dev, NULL);
 	spin_unlock(&ch_index_lock);
 
 	device_destroy(ch_sysfs_class, MKDEV(SCSI_CHANGER_MAJOR,ch->minor));
+	scsi_device_put(ch->device);
 	kref_put(&ch->ref, ch_destroy);
 	return 0;
 }
diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c
index d4c2a2e..84d73f5 100644
--- a/drivers/scsi/constants.c
+++ b/drivers/scsi/constants.c
@@ -404,7 +404,7 @@ static const char * const hostbyte_table[]={
 "DID_ABORT", "DID_PARITY", "DID_ERROR", "DID_RESET", "DID_BAD_INTR",
 "DID_PASSTHROUGH", "DID_SOFT_ERROR", "DID_IMM_RETRY", "DID_REQUEUE",
 "DID_TRANSPORT_DISRUPTED", "DID_TRANSPORT_FAILFAST", "DID_TARGET_FAILURE",
-"DID_NEXUS_FAILURE" };
+"DID_NEXUS_FAILURE", "DID_ALLOC_FAILURE", "DID_MEDIUM_ERROR" };
 
 static const char * const driverbyte_table[]={
 "DRIVER_OK", "DRIVER_BUSY", "DRIVER_SOFT",  "DRIVER_MEDIA", "DRIVER_ERROR",
diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c
index 13fbb2e..e95f5b3 100644
--- a/drivers/scsi/dc395x.c
+++ b/drivers/scsi/dc395x.c
@@ -61,7 +61,6 @@
 #include <asm/io.h>
 
 #include <scsi/scsi.h>
-#include <scsi/scsicam.h>	/* needed for scsicam_bios_param */
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_device.h>
 #include <scsi/scsi_host.h>
@@ -1053,38 +1052,6 @@ static int dc395x_queue_command_lck(struct scsi_cmnd *cmd, void (*done)(struct s
 
 static DEF_SCSI_QCMD(dc395x_queue_command)
 
-/*
- * Return the disk geometry for the given SCSI device.
- */
-static int dc395x_bios_param(struct scsi_device *sdev,
-		struct block_device *bdev, sector_t capacity, int *info)
-{
-#ifdef CONFIG_SCSI_DC395x_TRMS1040_TRADMAP
-	int heads, sectors, cylinders;
-	struct AdapterCtlBlk *acb;
-	int size = capacity;
-
-	dprintkdbg(DBG_0, "dc395x_bios_param..............\n");
-	acb = (struct AdapterCtlBlk *)sdev->host->hostdata;
-	heads = 64;
-	sectors = 32;
-	cylinders = size / (heads * sectors);
-
-	if ((acb->gmode2 & NAC_GREATER_1G) && (cylinders > 1024)) {
-		heads = 255;
-		sectors = 63;
-		cylinders = size / (heads * sectors);
-	}
-	geom[0] = heads;
-	geom[1] = sectors;
-	geom[2] = cylinders;
-	return 0;
-#else
-	return scsicam_bios_param(bdev, capacity, info);
-#endif
-}
-
-
 static void dump_register_info(struct AdapterCtlBlk *acb,
 		struct DeviceCtlBlk *dcb, struct ScsiReqBlk *srb)
 {
@@ -4622,7 +4589,6 @@ static struct scsi_host_template dc395x_driver_template = {
 	.show_info              = dc395x_show_info,
 	.name                   = DC395X_BANNER " " DC395X_VERSION,
 	.queuecommand           = dc395x_queue_command,
-	.bios_param             = dc395x_bios_param,
 	.slave_alloc            = dc395x_slave_alloc,
 	.slave_destroy          = dc395x_slave_destroy,
 	.can_queue              = DC395x_MAX_CAN_QUEUE,
diff --git a/drivers/scsi/dpt/dpti_ioctl.h b/drivers/scsi/dpt/dpti_ioctl.h
index 6bc33f4..25e9251 100644
--- a/drivers/scsi/dpt/dpti_ioctl.h
+++ b/drivers/scsi/dpt/dpti_ioctl.h
@@ -5,7 +5,7 @@
     begin                : Thu Sep 7 2000
     copyright            : (C) 2001 by Adaptec
 
-    See Documentation/scsi/dpti.txt for history, notes, license info
+    See Documentation/scsi/dpti.rst for history, notes, license info
     and credits
  ***************************************************************************/
 
diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c
index abc74fd..02dff3a 100644
--- a/drivers/scsi/dpt_i2o.c
+++ b/drivers/scsi/dpt_i2o.c
@@ -8,7 +8,7 @@
 			   July 30, 2001 First version being submitted
 			   for inclusion in the kernel.  V2.4
 
-    See Documentation/scsi/dpti.txt for history, notes, license info
+    See Documentation/scsi/dpti.rst for history, notes, license info
     and credits
  ***************************************************************************/
 
@@ -817,7 +817,7 @@ static int adpt_hba_reset(adpt_hba* pHba)
 	}
 	pHba->state &= ~DPTI_STATE_RESET;
 
-	adpt_fail_posted_scbs(pHba);
+	scsi_host_complete_all_commands(pHba->host, DID_RESET);
 	return 0;	/* return success */
 }
 
@@ -2173,7 +2173,7 @@ static irqreturn_t adpt_isr(int irq, void *dev_id)
 						 readl(reply + 12) - 1);
 			if(cmd != NULL){
 				scsi_dma_unmap(cmd);
-				adpt_i2o_to_scsi(reply, cmd);
+				adpt_i2o_scsi_complete(reply, cmd);
 			}
 		}
 		writel(m, pHba->reply_port);
@@ -2335,13 +2335,12 @@ static s32 adpt_scsi_host_alloc(adpt_hba* pHba, struct scsi_host_template *sht)
 	host->unique_id = (u32)sys_tbl_pa + pHba->unit;
 	host->sg_tablesize = pHba->sg_tablesize;
 	host->can_queue = pHba->post_fifo_size;
-	host->use_cmd_list = 1;
 
 	return 0;
 }
 
 
-static s32 adpt_i2o_to_scsi(void __iomem *reply, struct scsi_cmnd* cmd)
+static void adpt_i2o_scsi_complete(void __iomem *reply, struct scsi_cmnd *cmd)
 {
 	adpt_hba* pHba;
 	u32 hba_status;
@@ -2459,7 +2458,6 @@ static s32 adpt_i2o_to_scsi(void __iomem *reply, struct scsi_cmnd* cmd)
 	if(cmd->scsi_done != NULL){
 		cmd->scsi_done(cmd);
 	} 
-	return cmd->result;
 }
 
 
@@ -2647,23 +2645,6 @@ static s32 adpt_i2o_reparse_lct(adpt_hba* pHba)
 	return 0;
 }
 
-static void adpt_fail_posted_scbs(adpt_hba* pHba)
-{
-	struct scsi_cmnd* 	cmd = NULL;
-	struct scsi_device* 	d = NULL;
-
-	shost_for_each_device(d, pHba->host) {
-		unsigned long flags;
-		spin_lock_irqsave(&d->list_lock, flags);
-		list_for_each_entry(cmd, &d->cmd_list, list) {
-			cmd->result = (DID_OK << 16) | (QUEUE_FULL <<1);
-			cmd->scsi_done(cmd);
-		}
-		spin_unlock_irqrestore(&d->list_lock, flags);
-	}
-}
-
-
 /*============================================================================
  *  Routines from i2o subsystem
  *============================================================================
diff --git a/drivers/scsi/dpti.h b/drivers/scsi/dpti.h
index 42b1e28..8a079e8 100644
--- a/drivers/scsi/dpti.h
+++ b/drivers/scsi/dpti.h
@@ -5,7 +5,7 @@
     begin                : Thu Sep 7 2000
     copyright            : (C) 2001 by Adaptec
 
-    See Documentation/scsi/dpti.txt for history, notes, license info
+    See Documentation/scsi/dpti.rst for history, notes, license info
     and credits
  ***************************************************************************/
 
@@ -286,7 +286,7 @@ static s32 adpt_i2o_status_get(adpt_hba* pHba);
 static s32 adpt_i2o_init_outbound_q(adpt_hba* pHba);
 static s32 adpt_i2o_hrt_get(adpt_hba* pHba);
 static s32 adpt_scsi_to_i2o(adpt_hba* pHba, struct scsi_cmnd* cmd, struct adpt_device* dptdevice);
-static s32 adpt_i2o_to_scsi(void __iomem *reply, struct scsi_cmnd* cmd);
+static void adpt_i2o_scsi_complete(void __iomem *reply, struct scsi_cmnd *cmd);
 static s32 adpt_scsi_host_alloc(adpt_hba* pHba,struct scsi_host_template * sht);
 static s32 adpt_hba_reset(adpt_hba* pHba);
 static s32 adpt_i2o_reset_hba(adpt_hba* pHba);
@@ -295,7 +295,6 @@ static s32 adpt_i2o_reparse_lct(adpt_hba* pHba);
 static s32 adpt_send_nop(adpt_hba*pHba,u32 m);
 static void adpt_i2o_delete_hba(adpt_hba* pHba);
 static void adpt_inquiry(adpt_hba* pHba);
-static void adpt_fail_posted_scbs(adpt_hba* pHba);
 static struct adpt_device* adpt_find_device(adpt_hba* pHba, u32 chan, u32 id, u64 lun);
 static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev) ;
 static int adpt_i2o_online_hba(adpt_hba* pHba);
diff --git a/drivers/scsi/fnic/fnic_trace.c b/drivers/scsi/fnic/fnic_trace.c
index a0d01ae..9d52d83 100644
--- a/drivers/scsi/fnic/fnic_trace.c
+++ b/drivers/scsi/fnic/fnic_trace.c
@@ -138,7 +138,7 @@ int fnic_get_trace_data(fnic_dbgfs_t *fnic_dbgfs_prt)
 			 * Dump trace buffer entry to memory file
 			 * and increment read index @rd_idx
 			 */
-			len += snprintf(fnic_dbgfs_prt->buffer + len,
+			len += scnprintf(fnic_dbgfs_prt->buffer + len,
 				  (trace_max_pages * PAGE_SIZE * 3) - len,
 				  "%16llu.%09lu %-50s %8x %8x %16llx %16llx "
 				  "%16llx %16llx %16llx\n", (u64)val.tv_sec,
@@ -180,7 +180,7 @@ int fnic_get_trace_data(fnic_dbgfs_t *fnic_dbgfs_prt)
 			 * Dump trace buffer entry to memory file
 			 * and increment read index @rd_idx
 			 */
-			len += snprintf(fnic_dbgfs_prt->buffer + len,
+			len += scnprintf(fnic_dbgfs_prt->buffer + len,
 				  (trace_max_pages * PAGE_SIZE * 3) - len,
 				  "%16llu.%09lu %-50s %8x %8x %16llx %16llx "
 				  "%16llx %16llx %16llx\n", (u64)val.tv_sec,
@@ -220,12 +220,12 @@ int fnic_get_stats_data(struct stats_debug_info *debug,
 	struct timespec64 val1, val2;
 
 	ktime_get_real_ts64(&val1);
-	len = snprintf(debug->debug_buffer + len, buf_size - len,
+	len = scnprintf(debug->debug_buffer + len, buf_size - len,
 		"------------------------------------------\n"
 		 "\t\tTime\n"
 		"------------------------------------------\n");
 
-	len += snprintf(debug->debug_buffer + len, buf_size - len,
+	len += scnprintf(debug->debug_buffer + len, buf_size - len,
 		"Current time :          [%lld:%ld]\n"
 		"Last stats reset time:  [%lld:%09ld]\n"
 		"Last stats read time:   [%lld:%ld]\n"
@@ -243,11 +243,11 @@ int fnic_get_stats_data(struct stats_debug_info *debug,
 
 	stats->stats_timestamps.last_read_time = val1;
 
-	len += snprintf(debug->debug_buffer + len, buf_size - len,
+	len += scnprintf(debug->debug_buffer + len, buf_size - len,
 		  "------------------------------------------\n"
 		  "\t\tIO Statistics\n"
 		  "------------------------------------------\n");
-	len += snprintf(debug->debug_buffer + len, buf_size - len,
+	len += scnprintf(debug->debug_buffer + len, buf_size - len,
 		  "Number of Active IOs: %lld\nMaximum Active IOs: %lld\n"
 		  "Number of IOs: %lld\nNumber of IO Completions: %lld\n"
 		  "Number of IO Failures: %lld\nNumber of IO NOT Found: %lld\n"
@@ -280,16 +280,16 @@ int fnic_get_stats_data(struct stats_debug_info *debug,
 		  (u64)atomic64_read(&stats->io_stats.io_btw_10000_to_30000_msec),
 		  (u64)atomic64_read(&stats->io_stats.io_greater_than_30000_msec));
 
-	len += snprintf(debug->debug_buffer + len, buf_size - len,
+	len += scnprintf(debug->debug_buffer + len, buf_size - len,
 		  "\nCurrent Max IO time : %lld\n",
 		  (u64)atomic64_read(&stats->io_stats.current_max_io_time));
 
-	len += snprintf(debug->debug_buffer + len, buf_size - len,
+	len += scnprintf(debug->debug_buffer + len, buf_size - len,
 		  "\n------------------------------------------\n"
 		  "\t\tAbort Statistics\n"
 		  "------------------------------------------\n");
 
-	len += snprintf(debug->debug_buffer + len, buf_size - len,
+	len += scnprintf(debug->debug_buffer + len, buf_size - len,
 		  "Number of Aborts: %lld\n"
 		  "Number of Abort Failures: %lld\n"
 		  "Number of Abort Driver Timeouts: %lld\n"
@@ -318,12 +318,12 @@ int fnic_get_stats_data(struct stats_debug_info *debug,
 		  (u64)atomic64_read(&stats->abts_stats.abort_issued_btw_50_to_60_sec),
 		  (u64)atomic64_read(&stats->abts_stats.abort_issued_greater_than_60_sec));
 
-	len += snprintf(debug->debug_buffer + len, buf_size - len,
+	len += scnprintf(debug->debug_buffer + len, buf_size - len,
 		  "\n------------------------------------------\n"
 		  "\t\tTerminate Statistics\n"
 		  "------------------------------------------\n");
 
-	len += snprintf(debug->debug_buffer + len, buf_size - len,
+	len += scnprintf(debug->debug_buffer + len, buf_size - len,
 		  "Number of Terminates: %lld\n"
 		  "Maximum Terminates: %lld\n"
 		  "Number of Terminate Driver Timeouts: %lld\n"
@@ -337,12 +337,12 @@ int fnic_get_stats_data(struct stats_debug_info *debug,
 		  (u64)atomic64_read(&stats->term_stats.terminate_io_not_found),
 		  (u64)atomic64_read(&stats->term_stats.terminate_failures));
 
-	len += snprintf(debug->debug_buffer + len, buf_size - len,
+	len += scnprintf(debug->debug_buffer + len, buf_size - len,
 		  "\n------------------------------------------\n"
 		  "\t\tReset Statistics\n"
 		  "------------------------------------------\n");
 
-	len += snprintf(debug->debug_buffer + len, buf_size - len,
+	len += scnprintf(debug->debug_buffer + len, buf_size - len,
 		  "Number of Device Resets: %lld\n"
 		  "Number of Device Reset Failures: %lld\n"
 		  "Number of Device Reset Aborts: %lld\n"
@@ -368,12 +368,12 @@ int fnic_get_stats_data(struct stats_debug_info *debug,
 			  &stats->reset_stats.fnic_reset_completions),
 		  (u64)atomic64_read(&stats->reset_stats.fnic_reset_failures));
 
-	len += snprintf(debug->debug_buffer + len, buf_size - len,
+	len += scnprintf(debug->debug_buffer + len, buf_size - len,
 		  "\n------------------------------------------\n"
 		  "\t\tFirmware Statistics\n"
 		  "------------------------------------------\n");
 
-	len += snprintf(debug->debug_buffer + len, buf_size - len,
+	len += scnprintf(debug->debug_buffer + len, buf_size - len,
 		  "Number of Active FW Requests %lld\n"
 		  "Maximum FW Requests: %lld\n"
 		  "Number of FW out of resources: %lld\n"
@@ -383,12 +383,12 @@ int fnic_get_stats_data(struct stats_debug_info *debug,
 		  (u64)atomic64_read(&stats->fw_stats.fw_out_of_resources),
 		  (u64)atomic64_read(&stats->fw_stats.io_fw_errs));
 
-	len += snprintf(debug->debug_buffer + len, buf_size - len,
+	len += scnprintf(debug->debug_buffer + len, buf_size - len,
 		  "\n------------------------------------------\n"
 		  "\t\tVlan Discovery Statistics\n"
 		  "------------------------------------------\n");
 
-	len += snprintf(debug->debug_buffer + len, buf_size - len,
+	len += scnprintf(debug->debug_buffer + len, buf_size - len,
 		  "Number of Vlan Discovery Requests Sent %lld\n"
 		  "Vlan Response Received with no FCF VLAN ID: %lld\n"
 		  "No solicitations recvd after vlan set, expiry count: %lld\n"
@@ -398,7 +398,7 @@ int fnic_get_stats_data(struct stats_debug_info *debug,
 		  (u64)atomic64_read(&stats->vlan_stats.sol_expiry_count),
 		  (u64)atomic64_read(&stats->vlan_stats.flogi_rejects));
 
-	len += snprintf(debug->debug_buffer + len, buf_size - len,
+	len += scnprintf(debug->debug_buffer + len, buf_size - len,
 		  "\n------------------------------------------\n"
 		  "\t\tOther Important Statistics\n"
 		  "------------------------------------------\n");
@@ -406,7 +406,7 @@ int fnic_get_stats_data(struct stats_debug_info *debug,
 	jiffies_to_timespec64(stats->misc_stats.last_isr_time, &val1);
 	jiffies_to_timespec64(stats->misc_stats.last_ack_time, &val2);
 
-	len += snprintf(debug->debug_buffer + len, buf_size - len,
+	len += scnprintf(debug->debug_buffer + len, buf_size - len,
 		  "Last ISR time: %llu (%8llu.%09lu)\n"
 		  "Last ACK time: %llu (%8llu.%09lu)\n"
 		  "Max ISR jiffies: %llu\n"
@@ -452,7 +452,7 @@ int fnic_get_stats_data(struct stats_debug_info *debug,
 		  (u64)atomic64_read(&stats->misc_stats.rport_not_ready),
 		  (u64)atomic64_read(&stats->misc_stats.frame_errors));
 
-	len += snprintf(debug->debug_buffer + len, buf_size - len,
+	len += scnprintf(debug->debug_buffer + len, buf_size - len,
 			"Firmware reported port speed: %llu\n",
 			(u64)atomic64_read(
 				&stats->misc_stats.current_port_speed));
@@ -742,7 +742,7 @@ int fnic_fc_trace_get_data(fnic_dbgfs_t *fnic_dbgfs_prt, u8 rdata_flag)
 	rd_idx = fc_trace_entries.rd_idx;
 	wr_idx = fc_trace_entries.wr_idx;
 	if (rdata_flag == 0) {
-		len += snprintf(fnic_dbgfs_prt->buffer + len,
+		len += scnprintf(fnic_dbgfs_prt->buffer + len,
 			(fnic_fc_trace_max_pages * PAGE_SIZE * 3) - len,
 			"Time Stamp (UTC)\t\t"
 			"Host No:   F Type:  len:     FCoE_FRAME:\n");
@@ -762,11 +762,11 @@ int fnic_fc_trace_get_data(fnic_dbgfs_t *fnic_dbgfs_prt, u8 rdata_flag)
 		} else {
 			fc_trace = (char *)tdata;
 			for (j = 0; j < FC_TRC_SIZE_BYTES; j++) {
-				len += snprintf(fnic_dbgfs_prt->buffer + len,
+				len += scnprintf(fnic_dbgfs_prt->buffer + len,
 				(fnic_fc_trace_max_pages * PAGE_SIZE * 3)
 				- len, "%02x", fc_trace[j] & 0xff);
 			} /* for loop */
-			len += snprintf(fnic_dbgfs_prt->buffer + len,
+			len += scnprintf(fnic_dbgfs_prt->buffer + len,
 				(fnic_fc_trace_max_pages * PAGE_SIZE * 3) - len,
 				"\n");
 		}
@@ -810,7 +810,7 @@ void copy_and_format_trace_data(struct fc_trace_hdr *tdata,
 	time64_to_tm(tdata->time_stamp.tv_sec, 0, &tm);
 
 	fmt = "%02d:%02d:%04ld %02d:%02d:%02d.%09lu ns%8x       %c%8x\t";
-	len += snprintf(fnic_dbgfs_prt->buffer + len,
+	len += scnprintf(fnic_dbgfs_prt->buffer + len,
 		max_size - len,
 		fmt,
 		tm.tm_mon + 1, tm.tm_mday, tm.tm_year + 1900,
@@ -823,25 +823,25 @@ void copy_and_format_trace_data(struct fc_trace_hdr *tdata,
 	for (j = 0; j < min_t(u8, tdata->frame_len,
 		(u8)(FC_TRC_SIZE_BYTES - FC_TRC_HEADER_SIZE)); j++) {
 		if (tdata->frame_type == FNIC_FC_LE) {
-			len += snprintf(fnic_dbgfs_prt->buffer + len,
+			len += scnprintf(fnic_dbgfs_prt->buffer + len,
 				max_size - len, "%c", fc_trace[j]);
 		} else {
-			len += snprintf(fnic_dbgfs_prt->buffer + len,
+			len += scnprintf(fnic_dbgfs_prt->buffer + len,
 				max_size - len, "%02x", fc_trace[j] & 0xff);
-			len += snprintf(fnic_dbgfs_prt->buffer + len,
+			len += scnprintf(fnic_dbgfs_prt->buffer + len,
 				max_size - len, " ");
 			if (j == ethhdr_len ||
 				j == ethhdr_len + fcoehdr_len ||
 				j == ethhdr_len + fcoehdr_len + fchdr_len ||
 				(i > 3 && j%fchdr_len == 0)) {
-				len += snprintf(fnic_dbgfs_prt->buffer
+				len += scnprintf(fnic_dbgfs_prt->buffer
 					+ len, max_size - len,
 					"\n\t\t\t\t\t\t\t\t");
 				i++;
 			}
 		} /* end of else*/
 	} /* End of for loop*/
-	len += snprintf(fnic_dbgfs_prt->buffer + len,
+	len += scnprintf(fnic_dbgfs_prt->buffer + len,
 		max_size - len, "\n");
 	*orig_len = len;
 }
diff --git a/drivers/scsi/fnic/vnic_devcmd.h b/drivers/scsi/fnic/vnic_devcmd.h
index c5dde55..c20d30e 100644
--- a/drivers/scsi/fnic/vnic_devcmd.h
+++ b/drivers/scsi/fnic/vnic_devcmd.h
@@ -442,7 +442,7 @@ struct vnic_devcmd_notify {
 struct vnic_devcmd_provinfo {
 	u8 oui[3];
 	u8 type;
-	u8 data[0];
+	u8 data[];
 };
 
 /*
diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c
index 2ab774e..2cc676e 100644
--- a/drivers/scsi/g_NCR5380.c
+++ b/drivers/scsi/g_NCR5380.c
@@ -20,7 +20,7 @@
  * Added ISAPNP support for DTC436 adapters,
  * Thomas Sailer, sailer@ife.ee.ethz.ch
  *
- * See Documentation/scsi/g_NCR5380.txt for more info.
+ * See Documentation/scsi/g_NCR5380.rst for more info.
  */
 
 #include <asm/io.h>
diff --git a/drivers/scsi/gdth_proc.c b/drivers/scsi/gdth_proc.c
index 381d849..c764312 100644
--- a/drivers/scsi/gdth_proc.c
+++ b/drivers/scsi/gdth_proc.c
@@ -193,7 +193,7 @@ int gdth_show_info(struct seq_file *m, struct Scsi_Host *host)
         for (i = 1;  i < MAX_RES_ARGS; i++) {
             if (reserve_list[i] == 0xff) 
                 break;
-            hlen += snprintf(hrec + hlen , 161 - hlen, ",%d", reserve_list[i]);
+	    hlen += scnprintf(hrec + hlen, 161 - hlen, ",%d", reserve_list[i]);
         }
     }
     seq_printf(m,
diff --git a/drivers/scsi/hisi_sas/Kconfig b/drivers/scsi/hisi_sas/Kconfig
index 90a1745..13ed907 100644
--- a/drivers/scsi/hisi_sas/Kconfig
+++ b/drivers/scsi/hisi_sas/Kconfig
@@ -6,6 +6,7 @@
 	select SCSI_SAS_LIBSAS
 	select BLK_DEV_INTEGRITY
 	depends on ATA
+	select SATA_HOST
 	help
 		This driver supports HiSilicon's SAS HBA, including support based
 		on platform device
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index a2debe0..374885a 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -2938,6 +2938,7 @@ static void read_iost_itct_cache_v3_hw(struct hisi_hba *hisi_hba,
 {
 	u32 cache_dw_size = HISI_SAS_IOST_ITCT_CACHE_DW_SZ *
 			    HISI_SAS_IOST_ITCT_CACHE_NUM;
+	struct device *dev = hisi_hba->dev;
 	u32 *buf = cache;
 	u32 i, val;
 
@@ -2950,7 +2951,7 @@ static void read_iost_itct_cache_v3_hw(struct hisi_hba *hisi_hba,
 	}
 
 	if (val != 0xffffffff) {
-		pr_err("Issue occur when reading IOST/ITCT cache!\n");
+		dev_err(dev, "Issue occurred in reading IOST/ITCT cache!\n");
 		return;
 	}
 
diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c
index 1d669e4..7ec91c3 100644
--- a/drivers/scsi/hosts.c
+++ b/drivers/scsi/hosts.c
@@ -650,3 +650,68 @@ void scsi_flush_work(struct Scsi_Host *shost)
 	flush_workqueue(shost->work_q);
 }
 EXPORT_SYMBOL_GPL(scsi_flush_work);
+
+static bool complete_all_cmds_iter(struct request *rq, void *data, bool rsvd)
+{
+	struct scsi_cmnd *scmd = blk_mq_rq_to_pdu(rq);
+	int status = *(int *)data;
+
+	scsi_dma_unmap(scmd);
+	scmd->result = status << 16;
+	scmd->scsi_done(scmd);
+	return true;
+}
+
+/**
+ * scsi_host_complete_all_commands - Terminate all running commands
+ * @shost:	Scsi Host on which commands should be terminated
+ * @status:	Status to be set for the terminated commands
+ *
+ * There is no protection against modification of the number
+ * of outstanding commands. It is the responsibility of the
+ * caller to ensure that concurrent I/O submission and/or
+ * completion is stopped when calling this function.
+ */
+void scsi_host_complete_all_commands(struct Scsi_Host *shost, int status)
+{
+	blk_mq_tagset_busy_iter(&shost->tag_set, complete_all_cmds_iter,
+				&status);
+}
+EXPORT_SYMBOL_GPL(scsi_host_complete_all_commands);
+
+struct scsi_host_busy_iter_data {
+	bool (*fn)(struct scsi_cmnd *, void *, bool);
+	void *priv;
+};
+
+static bool __scsi_host_busy_iter_fn(struct request *req, void *priv,
+				   bool reserved)
+{
+	struct scsi_host_busy_iter_data *iter_data = priv;
+	struct scsi_cmnd *sc = blk_mq_rq_to_pdu(req);
+
+	return iter_data->fn(sc, iter_data->priv, reserved);
+}
+
+/**
+ * scsi_host_busy_iter - Iterate over all busy commands
+ * @shost:	Pointer to Scsi_Host.
+ * @fn:		Function to call on each busy command
+ * @priv:	Data pointer passed to @fn
+ *
+ * If locking against concurrent command completions is required
+ * ithas to be provided by the caller
+ **/
+void scsi_host_busy_iter(struct Scsi_Host *shost,
+			 bool (*fn)(struct scsi_cmnd *, void *, bool),
+			 void *priv)
+{
+	struct scsi_host_busy_iter_data iter_data = {
+		.fn = fn,
+		.priv = priv,
+	};
+
+	blk_mq_tagset_busy_iter(&shost->tag_set, __scsi_host_busy_iter_fn,
+				&iter_data);
+}
+EXPORT_SYMBOL_GPL(scsi_host_busy_iter);
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 1a4ddfa..1e9302e 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -504,6 +504,12 @@ static ssize_t host_store_rescan(struct device *dev,
 	return count;
 }
 
+static void hpsa_turn_off_ioaccel_for_device(struct hpsa_scsi_dev_t *device)
+{
+	device->offload_enabled = 0;
+	device->offload_to_be_enabled = 0;
+}
+
 static ssize_t host_show_firmware_revision(struct device *dev,
 	     struct device_attribute *attr, char *buf)
 {
@@ -1738,8 +1744,7 @@ static void hpsa_figure_phys_disk_ptrs(struct ctlr_info *h,
 				__func__,
 				h->scsi_host->host_no, logical_drive->bus,
 				logical_drive->target, logical_drive->lun);
-			logical_drive->offload_enabled = 0;
-			logical_drive->offload_to_be_enabled = 0;
+			hpsa_turn_off_ioaccel_for_device(logical_drive);
 			logical_drive->queue_depth = 8;
 		}
 	}
@@ -2499,8 +2504,7 @@ static void process_ioaccel2_completion(struct ctlr_info *h,
 			IOACCEL2_SERV_RESPONSE_FAILURE) {
 		if (c2->error_data.status ==
 			IOACCEL2_STATUS_SR_IOACCEL_DISABLED) {
-			dev->offload_enabled = 0;
-			dev->offload_to_be_enabled = 0;
+			hpsa_turn_off_ioaccel_for_device(dev);
 		}
 
 		if (dev->in_reset) {
@@ -3670,10 +3674,17 @@ static void hpsa_get_ioaccel_status(struct ctlr_info *h,
 	this_device->offload_config =
 		!!(ioaccel_status & OFFLOAD_CONFIGURED_BIT);
 	if (this_device->offload_config) {
-		this_device->offload_to_be_enabled =
+		bool offload_enabled =
 			!!(ioaccel_status & OFFLOAD_ENABLED_BIT);
-		if (hpsa_get_raid_map(h, scsi3addr, this_device))
-			this_device->offload_to_be_enabled = 0;
+		/*
+		 * Check to see if offload can be enabled.
+		 */
+		if (offload_enabled) {
+			rc = hpsa_get_raid_map(h, scsi3addr, this_device);
+			if (rc) /* could not load raid_map */
+				goto out;
+			this_device->offload_to_be_enabled = 1;
+		}
 	}
 
 out:
@@ -3996,8 +4007,7 @@ static int hpsa_update_device_info(struct ctlr_info *h,
 	} else {
 		this_device->raid_level = RAID_UNKNOWN;
 		this_device->offload_config = 0;
-		this_device->offload_enabled = 0;
-		this_device->offload_to_be_enabled = 0;
+		hpsa_turn_off_ioaccel_for_device(this_device);
 		this_device->hba_ioaccel_enabled = 0;
 		this_device->volume_offline = 0;
 		this_device->queue_depth = h->nr_cmds;
@@ -5230,8 +5240,12 @@ static int hpsa_scsi_ioaccel_raid_map(struct ctlr_info *h,
 		/* Handles load balance across RAID 1 members.
 		 * (2-drive R1 and R10 with even # of drives.)
 		 * Appropriate for SSDs, not optimal for HDDs
+		 * Ensure we have the correct raid_map.
 		 */
-		BUG_ON(le16_to_cpu(map->layout_map_count) != 2);
+		if (le16_to_cpu(map->layout_map_count) != 2) {
+			hpsa_turn_off_ioaccel_for_device(dev);
+			return IO_ACCEL_INELIGIBLE;
+		}
 		if (dev->offload_to_mirror)
 			map_index += le16_to_cpu(map->data_disks_per_row);
 		dev->offload_to_mirror = !dev->offload_to_mirror;
@@ -5239,8 +5253,12 @@ static int hpsa_scsi_ioaccel_raid_map(struct ctlr_info *h,
 	case HPSA_RAID_ADM:
 		/* Handles N-way mirrors  (R1-ADM)
 		 * and R10 with # of drives divisible by 3.)
+		 * Ensure we have the correct raid_map.
 		 */
-		BUG_ON(le16_to_cpu(map->layout_map_count) != 3);
+		if (le16_to_cpu(map->layout_map_count) != 3) {
+			hpsa_turn_off_ioaccel_for_device(dev);
+			return IO_ACCEL_INELIGIBLE;
+		}
 
 		offload_to_mirror = dev->offload_to_mirror;
 		raid_map_helper(map, offload_to_mirror,
@@ -5265,7 +5283,10 @@ static int hpsa_scsi_ioaccel_raid_map(struct ctlr_info *h,
 		r5or6_blocks_per_row =
 			le16_to_cpu(map->strip_size) *
 			le16_to_cpu(map->data_disks_per_row);
-		BUG_ON(r5or6_blocks_per_row == 0);
+		if (r5or6_blocks_per_row == 0) {
+			hpsa_turn_off_ioaccel_for_device(dev);
+			return IO_ACCEL_INELIGIBLE;
+		}
 		stripesize = r5or6_blocks_per_row *
 			le16_to_cpu(map->layout_map_count);
 #if BITS_PER_LONG == 32
@@ -8285,7 +8306,7 @@ static int detect_controller_lockup(struct ctlr_info *h)
  *
  * Called from monitor controller worker (hpsa_event_monitor_worker)
  *
- * A Volume (or Volumes that comprise an Array set may be undergoing a
+ * A Volume (or Volumes that comprise an Array set) may be undergoing a
  * transformation, so we will be turning off ioaccel for all volumes that
  * make up the Array.
  */
@@ -8308,6 +8329,9 @@ static void hpsa_set_ioaccel_status(struct ctlr_info *h)
 	 * Run through current device list used during I/O requests.
 	 */
 	for (i = 0; i < h->ndevices; i++) {
+		int offload_to_be_enabled = 0;
+		int offload_config = 0;
+
 		device = h->dev[i];
 
 		if (!device)
@@ -8325,25 +8349,35 @@ static void hpsa_set_ioaccel_status(struct ctlr_info *h)
 			continue;
 
 		ioaccel_status = buf[IOACCEL_STATUS_BYTE];
-		device->offload_config =
+
+		/*
+		 * Check if offload is still configured on
+		 */
+		offload_config =
 				!!(ioaccel_status & OFFLOAD_CONFIGURED_BIT);
-		if (device->offload_config)
-			device->offload_to_be_enabled =
+		/*
+		 * If offload is configured on, check to see if ioaccel
+		 * needs to be enabled.
+		 */
+		if (offload_config)
+			offload_to_be_enabled =
 				!!(ioaccel_status & OFFLOAD_ENABLED_BIT);
 
 		/*
+		 * If ioaccel is to be re-enabled, re-enable later during the
+		 * scan operation so the driver can get a fresh raidmap
+		 * before turning ioaccel back on.
+		 */
+		if (offload_to_be_enabled)
+			continue;
+
+		/*
 		 * Immediately turn off ioaccel for any volume the
 		 * controller tells us to. Some of the reasons could be:
 		 *    transformation - change to the LVs of an Array.
 		 *    degraded volume - component failure
-		 *
-		 * If ioaccel is to be re-enabled, re-enable later during the
-		 * scan operation so the driver can get a fresh raidmap
-		 * before turning ioaccel back on.
-		 *
 		 */
-		if (!device->offload_to_be_enabled)
-			device->offload_enabled = 0;
+		hpsa_turn_off_ioaccel_for_device(device);
 	}
 
 	kfree(buf);
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index df897df..7da9e06 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -133,6 +133,7 @@ static void ibmvfc_tgt_send_prli(struct ibmvfc_target *);
 static void ibmvfc_tgt_send_plogi(struct ibmvfc_target *);
 static void ibmvfc_tgt_query_target(struct ibmvfc_target *);
 static void ibmvfc_npiv_logout(struct ibmvfc_host *);
+static void ibmvfc_tgt_implicit_logout_and_del(struct ibmvfc_target *);
 
 static const char *unknown_error = "unknown error";
 
@@ -413,22 +414,44 @@ static const char *ibmvfc_get_fc_type(u16 status)
  * @tgt:		ibmvfc target struct
  * @action:		action to perform
  *
+ * Returns:
+ *	0 if action changed / non-zero if not changed
  **/
-static void ibmvfc_set_tgt_action(struct ibmvfc_target *tgt,
+static int ibmvfc_set_tgt_action(struct ibmvfc_target *tgt,
 				  enum ibmvfc_target_action action)
 {
+	int rc = -EINVAL;
+
 	switch (tgt->action) {
-	case IBMVFC_TGT_ACTION_DEL_RPORT:
-		if (action == IBMVFC_TGT_ACTION_DELETED_RPORT)
+	case IBMVFC_TGT_ACTION_LOGOUT_RPORT:
+		if (action == IBMVFC_TGT_ACTION_LOGOUT_RPORT_WAIT ||
+		    action == IBMVFC_TGT_ACTION_DEL_RPORT) {
 			tgt->action = action;
+			rc = 0;
+		}
+		break;
+	case IBMVFC_TGT_ACTION_LOGOUT_RPORT_WAIT:
+		if (action == IBMVFC_TGT_ACTION_DEL_RPORT) {
+			tgt->action = action;
+			rc = 0;
+		}
+		break;
+	case IBMVFC_TGT_ACTION_DEL_RPORT:
+		if (action == IBMVFC_TGT_ACTION_DELETED_RPORT) {
+			tgt->action = action;
+			rc = 0;
+		}
 	case IBMVFC_TGT_ACTION_DELETED_RPORT:
 		break;
 	default:
-		if (action == IBMVFC_TGT_ACTION_DEL_RPORT)
+		if (action >= IBMVFC_TGT_ACTION_LOGOUT_RPORT)
 			tgt->add_rport = 0;
 		tgt->action = action;
+		rc = 0;
 		break;
 	}
+
+	return rc;
 }
 
 /**
@@ -537,6 +560,19 @@ static void ibmvfc_reinit_host(struct ibmvfc_host *vhost)
 }
 
 /**
+ * ibmvfc_del_tgt - Schedule cleanup and removal of the target
+ * @tgt:		ibmvfc target struct
+ * @job_step:	job step to perform
+ *
+ **/
+static void ibmvfc_del_tgt(struct ibmvfc_target *tgt)
+{
+	if (!ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_LOGOUT_RPORT))
+		tgt->job_step = ibmvfc_tgt_implicit_logout_and_del;
+	wake_up(&tgt->vhost->work_wait_q);
+}
+
+/**
  * ibmvfc_link_down - Handle a link down event from the adapter
  * @vhost:	ibmvfc host struct
  * @state:	ibmvfc host state to enter
@@ -550,7 +586,7 @@ static void ibmvfc_link_down(struct ibmvfc_host *vhost,
 	ENTER;
 	scsi_block_requests(vhost->host);
 	list_for_each_entry(tgt, &vhost->targets, queue)
-		ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
+		ibmvfc_del_tgt(tgt);
 	ibmvfc_set_host_state(vhost, state);
 	ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_TGT_DEL);
 	vhost->events_to_log |= IBMVFC_AE_LINKDOWN;
@@ -583,7 +619,7 @@ static void ibmvfc_init_host(struct ibmvfc_host *vhost)
 		vhost->async_crq.cur = 0;
 
 		list_for_each_entry(tgt, &vhost->targets, queue)
-			ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
+			ibmvfc_del_tgt(tgt);
 		scsi_block_requests(vhost->host);
 		ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_INIT);
 		vhost->job_step = ibmvfc_npiv_login;
@@ -1500,7 +1536,7 @@ static void ibmvfc_relogin(struct scsi_device *sdev)
 
 	list_for_each_entry(tgt, &vhost->targets, queue) {
 		if (rport == tgt->rport) {
-			ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
+			ibmvfc_del_tgt(tgt);
 			break;
 		}
 	}
@@ -2686,7 +2722,7 @@ static void ibmvfc_handle_async(struct ibmvfc_async_crq *crq,
 			if (tgt->need_login && be64_to_cpu(crq->event) == IBMVFC_AE_ELS_LOGO)
 				tgt->logo_rcvd = 1;
 			if (!tgt->need_login || be64_to_cpu(crq->event) == IBMVFC_AE_ELS_PLOGI) {
-				ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
+				ibmvfc_del_tgt(tgt);
 				ibmvfc_reinit_host(vhost);
 			}
 		}
@@ -3220,8 +3256,8 @@ static void ibmvfc_tasklet(void *data)
 static void ibmvfc_init_tgt(struct ibmvfc_target *tgt,
 			    void (*job_step) (struct ibmvfc_target *))
 {
-	ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_INIT);
-	tgt->job_step = job_step;
+	if (!ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_INIT))
+		tgt->job_step = job_step;
 	wake_up(&tgt->vhost->work_wait_q);
 }
 
@@ -3237,7 +3273,7 @@ static int ibmvfc_retry_tgt_init(struct ibmvfc_target *tgt,
 				  void (*job_step) (struct ibmvfc_target *))
 {
 	if (++tgt->init_retries > IBMVFC_MAX_TGT_INIT_RETRIES) {
-		ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
+		ibmvfc_del_tgt(tgt);
 		wake_up(&tgt->vhost->work_wait_q);
 		return 0;
 	} else
@@ -3312,13 +3348,13 @@ static void ibmvfc_tgt_prli_done(struct ibmvfc_event *evt)
 						tgt->ids.roles |= FC_PORT_ROLE_FCP_INITIATOR;
 					tgt->add_rport = 1;
 				} else
-					ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
+					ibmvfc_del_tgt(tgt);
 			} else if (prli_rsp[index].retry)
 				ibmvfc_retry_tgt_init(tgt, ibmvfc_tgt_send_prli);
 			else
-				ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
+				ibmvfc_del_tgt(tgt);
 		} else
-			ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
+			ibmvfc_del_tgt(tgt);
 		break;
 	case IBMVFC_MAD_DRIVER_FAILED:
 		break;
@@ -3335,7 +3371,7 @@ static void ibmvfc_tgt_prli_done(struct ibmvfc_event *evt)
 		else if (ibmvfc_retry_cmd(be16_to_cpu(rsp->status), be16_to_cpu(rsp->error)))
 			level += ibmvfc_retry_tgt_init(tgt, ibmvfc_tgt_send_prli);
 		else
-			ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
+			ibmvfc_del_tgt(tgt);
 
 		tgt_log(tgt, level, "Process Login failed: %s (%x:%x) rc=0x%02X\n",
 			ibmvfc_get_cmd_error(be16_to_cpu(rsp->status), be16_to_cpu(rsp->error)),
@@ -3434,7 +3470,7 @@ static void ibmvfc_tgt_plogi_done(struct ibmvfc_event *evt)
 		if (ibmvfc_retry_cmd(be16_to_cpu(rsp->status), be16_to_cpu(rsp->error)))
 			level += ibmvfc_retry_tgt_init(tgt, ibmvfc_tgt_send_plogi);
 		else
-			ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
+			ibmvfc_del_tgt(tgt);
 
 		tgt_log(tgt, level, "Port Login failed: %s (%x:%x) %s (%x) %s (%x) rc=0x%02X\n",
 			ibmvfc_get_cmd_error(be16_to_cpu(rsp->status), be16_to_cpu(rsp->error)),
@@ -3515,40 +3551,54 @@ static void ibmvfc_tgt_implicit_logout_done(struct ibmvfc_event *evt)
 		break;
 	}
 
-	if (vhost->action == IBMVFC_HOST_ACTION_TGT_INIT)
-		ibmvfc_init_tgt(tgt, ibmvfc_tgt_send_plogi);
-	else if (vhost->action == IBMVFC_HOST_ACTION_QUERY_TGTS &&
-		 tgt->scsi_id != tgt->new_scsi_id)
-		ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
+	ibmvfc_init_tgt(tgt, ibmvfc_tgt_send_plogi);
 	kref_put(&tgt->kref, ibmvfc_release_tgt);
 	wake_up(&vhost->work_wait_q);
 }
 
 /**
+ * __ibmvfc_tgt_get_implicit_logout_evt - Allocate and init an event for implicit logout
+ * @tgt:		ibmvfc target struct
+ *
+ * Returns:
+ *	Allocated and initialized ibmvfc_event struct
+ **/
+static struct ibmvfc_event *__ibmvfc_tgt_get_implicit_logout_evt(struct ibmvfc_target *tgt,
+								 void (*done) (struct ibmvfc_event *))
+{
+	struct ibmvfc_implicit_logout *mad;
+	struct ibmvfc_host *vhost = tgt->vhost;
+	struct ibmvfc_event *evt;
+
+	kref_get(&tgt->kref);
+	evt = ibmvfc_get_event(vhost);
+	ibmvfc_init_event(evt, done, IBMVFC_MAD_FORMAT);
+	evt->tgt = tgt;
+	mad = &evt->iu.implicit_logout;
+	memset(mad, 0, sizeof(*mad));
+	mad->common.version = cpu_to_be32(1);
+	mad->common.opcode = cpu_to_be32(IBMVFC_IMPLICIT_LOGOUT);
+	mad->common.length = cpu_to_be16(sizeof(*mad));
+	mad->old_scsi_id = cpu_to_be64(tgt->scsi_id);
+	return evt;
+}
+
+/**
  * ibmvfc_tgt_implicit_logout - Initiate an Implicit Logout for specified target
  * @tgt:		ibmvfc target struct
  *
  **/
 static void ibmvfc_tgt_implicit_logout(struct ibmvfc_target *tgt)
 {
-	struct ibmvfc_implicit_logout *mad;
 	struct ibmvfc_host *vhost = tgt->vhost;
 	struct ibmvfc_event *evt;
 
 	if (vhost->discovery_threads >= disc_threads)
 		return;
 
-	kref_get(&tgt->kref);
-	evt = ibmvfc_get_event(vhost);
 	vhost->discovery_threads++;
-	ibmvfc_init_event(evt, ibmvfc_tgt_implicit_logout_done, IBMVFC_MAD_FORMAT);
-	evt->tgt = tgt;
-	mad = &evt->iu.implicit_logout;
-	memset(mad, 0, sizeof(*mad));
-	mad->common.version = cpu_to_be32(1);
-	mad->common.opcode = cpu_to_be32(IBMVFC_IMPLICIT_LOGOUT);
-	mad->common.length = cpu_to_be16(sizeof(*mad));
-	mad->old_scsi_id = cpu_to_be64(tgt->scsi_id);
+	evt = __ibmvfc_tgt_get_implicit_logout_evt(tgt,
+						   ibmvfc_tgt_implicit_logout_done);
 
 	ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_INIT_WAIT);
 	if (ibmvfc_send_event(evt, vhost, default_timeout)) {
@@ -3560,6 +3610,53 @@ static void ibmvfc_tgt_implicit_logout(struct ibmvfc_target *tgt)
 }
 
 /**
+ * ibmvfc_tgt_implicit_logout_and_del_done - Completion handler for Implicit Logout MAD
+ * @evt:	ibmvfc event struct
+ *
+ **/
+static void ibmvfc_tgt_implicit_logout_and_del_done(struct ibmvfc_event *evt)
+{
+	struct ibmvfc_target *tgt = evt->tgt;
+	struct ibmvfc_host *vhost = evt->vhost;
+	struct ibmvfc_passthru_mad *mad = &evt->xfer_iu->passthru;
+	u32 status = be16_to_cpu(mad->common.status);
+
+	vhost->discovery_threads--;
+	ibmvfc_free_event(evt);
+	ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
+
+	tgt_dbg(tgt, "Implicit Logout %s\n", (status == IBMVFC_MAD_SUCCESS) ? "succeeded" : "failed");
+	kref_put(&tgt->kref, ibmvfc_release_tgt);
+	wake_up(&vhost->work_wait_q);
+}
+
+/**
+ * ibmvfc_tgt_implicit_logout_and_del - Initiate an Implicit Logout for specified target
+ * @tgt:		ibmvfc target struct
+ *
+ **/
+static void ibmvfc_tgt_implicit_logout_and_del(struct ibmvfc_target *tgt)
+{
+	struct ibmvfc_host *vhost = tgt->vhost;
+	struct ibmvfc_event *evt;
+
+	if (vhost->discovery_threads >= disc_threads)
+		return;
+
+	vhost->discovery_threads++;
+	evt = __ibmvfc_tgt_get_implicit_logout_evt(tgt,
+						   ibmvfc_tgt_implicit_logout_and_del_done);
+
+	ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_LOGOUT_RPORT_WAIT);
+	if (ibmvfc_send_event(evt, vhost, default_timeout)) {
+		vhost->discovery_threads--;
+		ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
+		kref_put(&tgt->kref, ibmvfc_release_tgt);
+	} else
+		tgt_dbg(tgt, "Sent Implicit Logout\n");
+}
+
+/**
  * ibmvfc_adisc_needs_plogi - Does device need PLOGI?
  * @mad:	ibmvfc passthru mad struct
  * @tgt:	ibmvfc target struct
@@ -3600,13 +3697,13 @@ static void ibmvfc_tgt_adisc_done(struct ibmvfc_event *evt)
 	case IBMVFC_MAD_SUCCESS:
 		tgt_dbg(tgt, "ADISC succeeded\n");
 		if (ibmvfc_adisc_needs_plogi(mad, tgt))
-			ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
+			ibmvfc_del_tgt(tgt);
 		break;
 	case IBMVFC_MAD_DRIVER_FAILED:
 		break;
 	case IBMVFC_MAD_FAILED:
 	default:
-		ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
+		ibmvfc_del_tgt(tgt);
 		fc_reason = (be32_to_cpu(mad->fc_iu.response[1]) & 0x00ff0000) >> 16;
 		fc_explain = (be32_to_cpu(mad->fc_iu.response[1]) & 0x0000ff00) >> 8;
 		tgt_info(tgt, "ADISC failed: %s (%x:%x) %s (%x) %s (%x) rc=0x%02X\n",
@@ -3799,9 +3896,8 @@ static void ibmvfc_tgt_query_target_done(struct ibmvfc_event *evt)
 	switch (status) {
 	case IBMVFC_MAD_SUCCESS:
 		tgt_dbg(tgt, "Query Target succeeded\n");
-		tgt->new_scsi_id = be64_to_cpu(rsp->scsi_id);
 		if (be64_to_cpu(rsp->scsi_id) != tgt->scsi_id)
-			ibmvfc_init_tgt(tgt, ibmvfc_tgt_implicit_logout);
+			ibmvfc_del_tgt(tgt);
 		else
 			ibmvfc_init_tgt(tgt, ibmvfc_tgt_adisc);
 		break;
@@ -3815,11 +3911,11 @@ static void ibmvfc_tgt_query_target_done(struct ibmvfc_event *evt)
 		if ((be16_to_cpu(rsp->status) & IBMVFC_FABRIC_MAPPED) == IBMVFC_FABRIC_MAPPED &&
 		    be16_to_cpu(rsp->error) == IBMVFC_UNABLE_TO_PERFORM_REQ &&
 		    be16_to_cpu(rsp->fc_explain) == IBMVFC_PORT_NAME_NOT_REG)
-			ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
+			ibmvfc_del_tgt(tgt);
 		else if (ibmvfc_retry_cmd(be16_to_cpu(rsp->status), be16_to_cpu(rsp->error)))
 			level += ibmvfc_retry_tgt_init(tgt, ibmvfc_tgt_query_target);
 		else
-			ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
+			ibmvfc_del_tgt(tgt);
 
 		tgt_log(tgt, level, "Query Target failed: %s (%x:%x) %s (%x) %s (%x) rc=0x%02X\n",
 			ibmvfc_get_cmd_error(be16_to_cpu(rsp->status), be16_to_cpu(rsp->error)),
@@ -3896,7 +3992,6 @@ static int ibmvfc_alloc_target(struct ibmvfc_host *vhost, u64 scsi_id)
 	tgt = mempool_alloc(vhost->tgt_pool, GFP_NOIO);
 	memset(tgt, 0, sizeof(*tgt));
 	tgt->scsi_id = scsi_id;
-	tgt->new_scsi_id = scsi_id;
 	tgt->vhost = vhost;
 	tgt->need_login = 1;
 	tgt->cancel_key = vhost->task_set++;
@@ -4189,6 +4284,25 @@ static int ibmvfc_dev_init_to_do(struct ibmvfc_host *vhost)
 }
 
 /**
+ * ibmvfc_dev_logo_to_do - Is there target logout work to do?
+ * @vhost:		ibmvfc host struct
+ *
+ * Returns:
+ *	1 if work to do / 0 if not
+ **/
+static int ibmvfc_dev_logo_to_do(struct ibmvfc_host *vhost)
+{
+	struct ibmvfc_target *tgt;
+
+	list_for_each_entry(tgt, &vhost->targets, queue) {
+		if (tgt->action == IBMVFC_TGT_ACTION_LOGOUT_RPORT ||
+		    tgt->action == IBMVFC_TGT_ACTION_LOGOUT_RPORT_WAIT)
+			return 1;
+	}
+	return 0;
+}
+
+/**
  * __ibmvfc_work_to_do - Is there task level work to do? (no locking)
  * @vhost:		ibmvfc host struct
  *
@@ -4217,11 +4331,20 @@ static int __ibmvfc_work_to_do(struct ibmvfc_host *vhost)
 			if (tgt->action == IBMVFC_TGT_ACTION_INIT_WAIT)
 				return 0;
 		return 1;
+	case IBMVFC_HOST_ACTION_TGT_DEL:
+	case IBMVFC_HOST_ACTION_TGT_DEL_FAILED:
+		if (vhost->discovery_threads == disc_threads)
+			return 0;
+		list_for_each_entry(tgt, &vhost->targets, queue)
+			if (tgt->action == IBMVFC_TGT_ACTION_LOGOUT_RPORT)
+				return 1;
+		list_for_each_entry(tgt, &vhost->targets, queue)
+			if (tgt->action == IBMVFC_TGT_ACTION_LOGOUT_RPORT_WAIT)
+				return 0;
+		return 1;
 	case IBMVFC_HOST_ACTION_LOGO:
 	case IBMVFC_HOST_ACTION_INIT:
 	case IBMVFC_HOST_ACTION_ALLOC_TGTS:
-	case IBMVFC_HOST_ACTION_TGT_DEL:
-	case IBMVFC_HOST_ACTION_TGT_DEL_FAILED:
 	case IBMVFC_HOST_ACTION_QUERY:
 	case IBMVFC_HOST_ACTION_RESET:
 	case IBMVFC_HOST_ACTION_REENABLE:
@@ -4391,6 +4514,18 @@ static void ibmvfc_do_work(struct ibmvfc_host *vhost)
 	case IBMVFC_HOST_ACTION_TGT_DEL:
 	case IBMVFC_HOST_ACTION_TGT_DEL_FAILED:
 		list_for_each_entry(tgt, &vhost->targets, queue) {
+			if (tgt->action == IBMVFC_TGT_ACTION_LOGOUT_RPORT) {
+				tgt->job_step(tgt);
+				break;
+			}
+		}
+
+		if (ibmvfc_dev_logo_to_do(vhost)) {
+			spin_unlock_irqrestore(vhost->host->host_lock, flags);
+			return;
+		}
+
+		list_for_each_entry(tgt, &vhost->targets, queue) {
 			if (tgt->action == IBMVFC_TGT_ACTION_DEL_RPORT) {
 				tgt_dbg(tgt, "Deleting rport\n");
 				rport = tgt->rport;
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.h b/drivers/scsi/ibmvscsi/ibmvfc.h
index 7da89f4..907889f 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.h
+++ b/drivers/scsi/ibmvscsi/ibmvfc.h
@@ -596,6 +596,8 @@ enum ibmvfc_target_action {
 	IBMVFC_TGT_ACTION_NONE = 0,
 	IBMVFC_TGT_ACTION_INIT,
 	IBMVFC_TGT_ACTION_INIT_WAIT,
+	IBMVFC_TGT_ACTION_LOGOUT_RPORT,
+	IBMVFC_TGT_ACTION_LOGOUT_RPORT_WAIT,
 	IBMVFC_TGT_ACTION_DEL_RPORT,
 	IBMVFC_TGT_ACTION_DELETED_RPORT,
 };
@@ -604,7 +606,6 @@ struct ibmvfc_target {
 	struct list_head queue;
 	struct ibmvfc_host *vhost;
 	u64 scsi_id;
-	u64 new_scsi_id;
 	struct fc_rport *rport;
 	int target_id;
 	enum ibmvfc_target_action action;
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index cd8db13..d48a8fa 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -1299,9 +1299,9 @@ static char *__ipr_format_res_path(u8 *res_path, char *buffer, int len)
 	char *p = buffer;
 
 	*p = '\0';
-	p += snprintf(p, buffer + len - p, "%02X", res_path[0]);
+	p += scnprintf(p, buffer + len - p, "%02X", res_path[0]);
 	for (i = 1; res_path[i] != 0xff && ((i * 3) < len); i++)
-		p += snprintf(p, buffer + len - p, "-%02X", res_path[i]);
+		p += scnprintf(p, buffer + len - p, "-%02X", res_path[i]);
 
 	return buffer;
 }
@@ -1322,7 +1322,7 @@ static char *ipr_format_res_path(struct ipr_ioa_cfg *ioa_cfg,
 	char *p = buffer;
 
 	*p = '\0';
-	p += snprintf(p, buffer + len - p, "%d/", ioa_cfg->host->host_no);
+	p += scnprintf(p, buffer + len - p, "%d/", ioa_cfg->host->host_no);
 	__ipr_format_res_path(res_path, p, len - (buffer - p));
 	return buffer;
 }
diff --git a/drivers/scsi/ipr.h b/drivers/scsi/ipr.h
index b97aa9a..9a0d3d7 100644
--- a/drivers/scsi/ipr.h
+++ b/drivers/scsi/ipr.h
@@ -451,12 +451,12 @@ struct ipr_config_table_hdr64 {
 
 struct ipr_config_table {
 	struct ipr_config_table_hdr hdr;
-	struct ipr_config_table_entry dev[0];
+	struct ipr_config_table_entry dev[];
 }__attribute__((packed, aligned (4)));
 
 struct ipr_config_table64 {
 	struct ipr_config_table_hdr64 hdr64;
-	struct ipr_config_table_entry64 dev[0];
+	struct ipr_config_table_entry64 dev[];
 }__attribute__((packed, aligned (8)));
 
 struct ipr_config_table_entry_wrapper {
@@ -792,7 +792,7 @@ struct ipr_mode_page28 {
 	struct ipr_mode_page_hdr hdr;
 	u8 num_entries;
 	u8 entry_length;
-	struct ipr_dev_bus_entry bus[0];
+	struct ipr_dev_bus_entry bus[];
 }__attribute__((packed));
 
 struct ipr_mode_page24 {
diff --git a/drivers/scsi/isci/sas.h b/drivers/scsi/isci/sas.h
index dc26b4a..15d8f36 100644
--- a/drivers/scsi/isci/sas.h
+++ b/drivers/scsi/isci/sas.h
@@ -201,7 +201,7 @@ struct smp_req {
 	u8 func;		/* byte 1 */
 	u8 alloc_resp_len;	/* byte 2 */
 	u8 req_len;		/* byte 3 */
-	u8 req_data[0];
+	u8 req_data[];
 }  __packed;
 
 /*
diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c
index da6e97d..773c45a 100644
--- a/drivers/scsi/libfc/fc_rport.c
+++ b/drivers/scsi/libfc/fc_rport.c
@@ -632,6 +632,8 @@ static void fc_rport_error(struct fc_rport_priv *rdata, int err)
 		fc_rport_enter_ready(rdata);
 		break;
 	case RPORT_ST_PRLI:
+		fc_rport_enter_plogi(rdata);
+		break;
 	case RPORT_ST_ADISC:
 		fc_rport_enter_logo(rdata);
 		break;
@@ -1208,9 +1210,15 @@ static void fc_rport_prli_resp(struct fc_seq *sp, struct fc_frame *fp,
 		rjt = fc_frame_payload_get(fp, sizeof(*rjt));
 		if (!rjt)
 			FC_RPORT_DBG(rdata, "PRLI bad response\n");
-		else
+		else {
 			FC_RPORT_DBG(rdata, "PRLI ELS rejected, reason %x expl %x\n",
 				     rjt->er_reason, rjt->er_explan);
+			if (rjt->er_reason == ELS_RJT_UNAB &&
+			    rjt->er_explan == ELS_EXPL_PLOGI_REQD) {
+				fc_rport_enter_plogi(rdata);
+				goto out;
+			}
+		}
 		fc_rport_error_retry(rdata, FC_EX_ELS_RJT);
 	}
 
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 70b99c0..874dd4b 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -2771,7 +2771,7 @@ iscsi_session_setup(struct iscsi_transport *iscsit, struct Scsi_Host *shost,
 		       "must be a power of 2.\n", total_cmds);
 		total_cmds = rounddown_pow_of_two(total_cmds);
 		if (total_cmds < ISCSI_TOTAL_CMDS_MIN)
-			return NULL;
+			goto dec_session_count;
 		printk(KERN_INFO "iscsi: Rounding can_queue to %d.\n",
 		       total_cmds);
 	}
@@ -3153,13 +3153,18 @@ void iscsi_conn_stop(struct iscsi_cls_conn *cls_conn, int flag)
 
 	switch (flag) {
 	case STOP_CONN_RECOVER:
+		cls_conn->state = ISCSI_CONN_FAILED;
+		break;
 	case STOP_CONN_TERM:
-		iscsi_start_session_recovery(session, conn, flag);
+		cls_conn->state = ISCSI_CONN_DOWN;
 		break;
 	default:
 		iscsi_conn_printk(KERN_ERR, conn,
 				  "invalid stop flag %d\n", flag);
+		return;
 	}
+
+	iscsi_start_session_recovery(session, conn, flag);
 }
 EXPORT_SYMBOL_GPL(iscsi_conn_stop);
 
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 04d73e2..8e2a356 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2017-2019 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2020 Broadcom. All Rights Reserved. The term *
  * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.     *
  * Copyright (C) 2004-2016 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
@@ -207,8 +207,7 @@ typedef struct lpfc_vpd {
 	} rev;
 	struct {
 #ifdef __BIG_ENDIAN_BITFIELD
-		uint32_t rsvd3  :19;  /* Reserved                             */
-		uint32_t cdss	: 1;  /* Configure Data Security SLI          */
+		uint32_t rsvd3  :20;  /* Reserved                             */
 		uint32_t rsvd2	: 3;  /* Reserved                             */
 		uint32_t cbg	: 1;  /* Configure BlockGuard                 */
 		uint32_t cmv	: 1;  /* Configure Max VPIs                   */
@@ -230,8 +229,7 @@ typedef struct lpfc_vpd {
 		uint32_t cmv	: 1;  /* Configure Max VPIs                   */
 		uint32_t cbg	: 1;  /* Configure BlockGuard                 */
 		uint32_t rsvd2	: 3;  /* Reserved                             */
-		uint32_t cdss	: 1;  /* Configure Data Security SLI          */
-		uint32_t rsvd3  :19;  /* Reserved                             */
+		uint32_t rsvd3  :20;  /* Reserved                             */
 #endif
 	} sli3Feat;
 } lpfc_vpd_t;
@@ -262,7 +260,6 @@ struct lpfc_stats {
 	uint32_t elsRcvPRLI;
 	uint32_t elsRcvLIRR;
 	uint32_t elsRcvRLS;
-	uint32_t elsRcvRPS;
 	uint32_t elsRcvRPL;
 	uint32_t elsRcvRRQ;
 	uint32_t elsRcvRTV;
@@ -481,8 +478,8 @@ struct lpfc_vport {
 	struct dentry *debug_nodelist;
 	struct dentry *debug_nvmestat;
 	struct dentry *debug_scsistat;
-	struct dentry *debug_nvmektime;
-	struct dentry *debug_cpucheck;
+	struct dentry *debug_ioktime;
+	struct dentry *debug_hdwqstat;
 	struct dentry *vport_debugfs_root;
 	struct lpfc_debugfs_trc *disc_trc;
 	atomic_t disc_trc_cnt;
@@ -749,6 +746,7 @@ struct lpfc_hba {
 					 * capability
 					 */
 #define HBA_FLOGI_ISSUED	0x100000 /* FLOGI was issued */
+#define HBA_DEFER_FLOGI		0x800000 /* Defer FLOGI till read_sparm cmpl */
 
 	uint32_t fcp_ring_in_use; /* When polling test if intr-hndlr active*/
 	struct lpfc_dmabuf slim2p;
@@ -887,7 +885,6 @@ struct lpfc_hba {
 #define LPFC_INITIALIZE_LINK              0	/* do normal init_link mbox */
 #define LPFC_DELAY_INIT_LINK              1	/* layered driver hold off */
 #define LPFC_DELAY_INIT_LINK_INDEFINITELY 2	/* wait, manual intervention */
-	uint32_t cfg_enable_dss;
 	uint32_t cfg_fdmi_on;
 #define LPFC_FDMI_NO_SUPPORT	0	/* FDMI not supported */
 #define LPFC_FDMI_SUPPORT	1	/* FDMI supported? */
@@ -1156,8 +1153,6 @@ struct lpfc_hba {
 	uint32_t iocb_cnt;
 	uint32_t iocb_max;
 	atomic_t sdev_cnt;
-	uint8_t fips_spec_rev;
-	uint8_t fips_level;
 	spinlock_t devicelock;	/* lock for luns list */
 	mempool_t *device_data_mem_pool;
 	struct list_head luns;
@@ -1175,12 +1170,11 @@ struct lpfc_hba {
 	uint16_t sfp_warning;
 
 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
-	uint16_t cpucheck_on;
+	uint16_t hdwqstat_on;
 #define LPFC_CHECK_OFF		0
 #define LPFC_CHECK_NVME_IO	1
-#define LPFC_CHECK_NVMET_RCV	2
-#define LPFC_CHECK_NVMET_IO	4
-#define LPFC_CHECK_SCSI_IO	8
+#define LPFC_CHECK_NVMET_IO	2
+#define LPFC_CHECK_SCSI_IO	4
 	uint16_t ktime_on;
 	uint64_t ktime_data_samples;
 	uint64_t ktime_status_samples;
@@ -1225,6 +1219,11 @@ struct lpfc_hba {
 #define LPFC_POLL_SLOWPATH	1	/* called from slowpath */
 
 	char os_host_name[MAXHOSTNAMELEN];
+
+	/* SCSI host template information - for physical port */
+	struct scsi_host_template port_template;
+	/* SCSI host template information - for all vports */
+	struct scsi_host_template vport_template;
 };
 
 static inline struct Scsi_Host *
@@ -1353,3 +1352,32 @@ lpfc_sli4_mod_hba_eq_delay(struct lpfc_hba *phba, struct lpfc_queue *eq,
 	writel(reg_data.word0, phba->sli4_hba.u.if_type2.EQDregaddr);
 	eq->q_mode = delay;
 }
+
+
+/*
+ * Macro that declares tables and a routine to perform enum type to
+ * ascii string lookup.
+ *
+ * Defines a <key,value> table for an enum. Uses xxx_INIT defines for
+ * the enum to populate the table.  Macro defines a routine (named
+ * by caller) that will search all elements of the table for the key
+ * and return the name string if found or "Unrecognized" if not found.
+ */
+#define DECLARE_ENUM2STR_LOOKUP(routine, enum_name, enum_init)		\
+static struct {								\
+	enum enum_name		value;					\
+	char			*name;					\
+} fc_##enum_name##_e2str_names[] = enum_init;				\
+static const char *routine(enum enum_name table_key)			\
+{									\
+	int i;								\
+	char *name = "Unrecognized";					\
+									\
+	for (i = 0; i < ARRAY_SIZE(fc_##enum_name##_e2str_names); i++) {\
+		if (fc_##enum_name##_e2str_names[i].value == table_key) {\
+			name = fc_##enum_name##_e2str_names[i].name;	\
+			break;						\
+		}							\
+	}								\
+	return name;							\
+}
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 46f56f30..1354c14 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2017-2019 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2020 Broadcom. All Rights Reserved. The term *
  * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.  *
  * Copyright (C) 2004-2016 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
@@ -2231,66 +2231,6 @@ lpfc_poll_store(struct device *dev, struct device_attribute *attr,
 }
 
 /**
- * lpfc_fips_level_show - Return the current FIPS level for the HBA
- * @dev: class unused variable.
- * @attr: device attribute, not used.
- * @buf: on return contains the module description text.
- *
- * Returns: size of formatted string.
- **/
-static ssize_t
-lpfc_fips_level_show(struct device *dev,  struct device_attribute *attr,
-		     char *buf)
-{
-	struct Scsi_Host  *shost = class_to_shost(dev);
-	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
-	struct lpfc_hba   *phba = vport->phba;
-
-	return scnprintf(buf, PAGE_SIZE, "%d\n", phba->fips_level);
-}
-
-/**
- * lpfc_fips_rev_show - Return the FIPS Spec revision for the HBA
- * @dev: class unused variable.
- * @attr: device attribute, not used.
- * @buf: on return contains the module description text.
- *
- * Returns: size of formatted string.
- **/
-static ssize_t
-lpfc_fips_rev_show(struct device *dev,  struct device_attribute *attr,
-		   char *buf)
-{
-	struct Scsi_Host  *shost = class_to_shost(dev);
-	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
-	struct lpfc_hba   *phba = vport->phba;
-
-	return scnprintf(buf, PAGE_SIZE, "%d\n", phba->fips_spec_rev);
-}
-
-/**
- * lpfc_dss_show - Return the current state of dss and the configured state
- * @dev: class converted to a Scsi_host structure.
- * @attr: device attribute, not used.
- * @buf: on return contains the formatted text.
- *
- * Returns: size of formatted string.
- **/
-static ssize_t
-lpfc_dss_show(struct device *dev, struct device_attribute *attr,
-	      char *buf)
-{
-	struct Scsi_Host *shost = class_to_shost(dev);
-	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
-	struct lpfc_hba   *phba = vport->phba;
-
-	return scnprintf(buf, PAGE_SIZE, "%s - %sOperational\n",
-			(phba->cfg_enable_dss) ? "Enabled" : "Disabled",
-			(phba->sli3_options & LPFC_SLI3_DSS_ENABLED) ?
-				"" : "Not ");
-}
-
-/**
  * lpfc_sriov_hw_max_virtfn_show - Return maximum number of virtual functions
  * @dev: class converted to a Scsi_host structure.
  * @attr: device attribute, not used.
@@ -2705,9 +2645,6 @@ static DEVICE_ATTR(max_xri, S_IRUGO, lpfc_max_xri_show, NULL);
 static DEVICE_ATTR(used_xri, S_IRUGO, lpfc_used_xri_show, NULL);
 static DEVICE_ATTR(npiv_info, S_IRUGO, lpfc_npiv_info_show, NULL);
 static DEVICE_ATTR_RO(lpfc_temp_sensor);
-static DEVICE_ATTR_RO(lpfc_fips_level);
-static DEVICE_ATTR_RO(lpfc_fips_rev);
-static DEVICE_ATTR_RO(lpfc_dss);
 static DEVICE_ATTR_RO(lpfc_sriov_hw_max_virtfn);
 static DEVICE_ATTR(protocol, S_IRUGO, lpfc_sli4_protocol_show, NULL);
 static DEVICE_ATTR(lpfc_xlane_supported, S_IRUGO, lpfc_oas_supported_show,
@@ -3868,12 +3805,9 @@ LPFC_VPORT_ATTR_R(enable_da_id, 1, 0, 1,
 
 /*
 # lun_queue_depth:  This parameter is used to limit the number of outstanding
-# commands per FCP LUN. Value range is [1,512]. Default value is 30.
-# If this parameter value is greater than 1/8th the maximum number of exchanges
-# supported by the HBA port, then the lun queue depth will be reduced to
-# 1/8th the maximum number of exchanges.
+# commands per FCP LUN.
 */
-LPFC_VPORT_ATTR_R(lun_queue_depth, 30, 1, 512,
+LPFC_VPORT_ATTR_R(lun_queue_depth, 64, 1, 512,
 		  "Max number of FCP commands we can queue to a specific LUN");
 
 /*
@@ -4783,7 +4717,7 @@ static DEVICE_ATTR_RW(lpfc_aer_support);
  * Description:
  * If the @buf contains 1 and the device currently has the AER support
  * enabled, then invokes the kernel AER helper routine
- * pci_cleanup_aer_uncorrect_error_status to clean up the uncorrectable
+ * pci_aer_clear_nonfatal_status() to clean up the uncorrectable
  * error status register.
  *
  * Notes:
@@ -4809,7 +4743,7 @@ lpfc_aer_cleanup_state(struct device *dev, struct device_attribute *attr,
 		return -EINVAL;
 
 	if (phba->hba_flag & HBA_AER_ENABLED)
-		rc = pci_cleanup_aer_uncorrect_error_status(phba->pcidev);
+		rc = pci_aer_clear_nonfatal_status(phba->pcidev);
 
 	if (rc == 0)
 		return strlen(buf);
@@ -6254,9 +6188,6 @@ struct device_attribute *lpfc_hba_attrs[] = {
 	&dev_attr_pt,
 	&dev_attr_txq_hw,
 	&dev_attr_txcmplq_hw,
-	&dev_attr_lpfc_fips_level,
-	&dev_attr_lpfc_fips_rev,
-	&dev_attr_lpfc_dss,
 	&dev_attr_lpfc_sriov_hw_max_virtfn,
 	&dev_attr_protocol,
 	&dev_attr_lpfc_xlane_supported,
@@ -6292,8 +6223,6 @@ struct device_attribute *lpfc_vport_attrs[] = {
 	&dev_attr_lpfc_max_scsicmpl_time,
 	&dev_attr_lpfc_stat_data_ctrl,
 	&dev_attr_lpfc_static_vport,
-	&dev_attr_lpfc_fips_level,
-	&dev_attr_lpfc_fips_rev,
 	NULL,
 };
 
@@ -7402,7 +7331,6 @@ lpfc_get_cfgparam(struct lpfc_hba *phba)
 	lpfc_suppress_link_up_init(phba, lpfc_suppress_link_up);
 	lpfc_delay_discovery_init(phba, lpfc_delay_discovery);
 	lpfc_sli_mode_init(phba, lpfc_sli_mode);
-	phba->cfg_enable_dss = 1;
 	lpfc_enable_mds_diags_init(phba, lpfc_enable_mds_diags);
 	lpfc_ras_fwlog_buffsize_init(phba, lpfc_ras_fwlog_buffsize);
 	lpfc_ras_fwlog_level_init(phba, lpfc_ras_fwlog_level);
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index 25d3dd3..76dc8d9 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -140,9 +140,10 @@ int lpfc_issue_els_prli(struct lpfc_vport *, struct lpfc_nodelist *, uint8_t);
 int lpfc_issue_els_adisc(struct lpfc_vport *, struct lpfc_nodelist *, uint8_t);
 int lpfc_issue_els_logo(struct lpfc_vport *, struct lpfc_nodelist *, uint8_t);
 int lpfc_issue_els_npiv_logo(struct lpfc_vport *, struct lpfc_nodelist *);
-int lpfc_issue_els_scr(struct lpfc_vport *, uint32_t, uint8_t);
+int lpfc_issue_els_scr(struct lpfc_vport *vport, uint8_t retry);
 int lpfc_issue_els_rscn(struct lpfc_vport *vport, uint8_t retry);
 int lpfc_issue_fabric_reglogin(struct lpfc_vport *);
+int lpfc_issue_els_rdf(struct lpfc_vport *vport, uint8_t retry);
 int lpfc_els_free_iocb(struct lpfc_hba *, struct lpfc_iocbq *);
 int lpfc_ct_free_iocb(struct lpfc_hba *, struct lpfc_iocbq *);
 int lpfc_els_rsp_acc(struct lpfc_vport *, uint32_t, struct lpfc_iocbq *,
@@ -403,9 +404,7 @@ void lpfc_free_sysfs_attr(struct lpfc_vport *);
 extern struct device_attribute *lpfc_hba_attrs[];
 extern struct device_attribute *lpfc_vport_attrs[];
 extern struct scsi_host_template lpfc_template;
-extern struct scsi_host_template lpfc_template_no_hr;
 extern struct scsi_host_template lpfc_template_nvme;
-extern struct scsi_host_template lpfc_vport_template;
 extern struct fc_function_template lpfc_transport_functions;
 extern struct fc_function_template lpfc_vport_transport_functions;
 
@@ -589,6 +588,7 @@ struct lpfc_io_buf *lpfc_get_io_buf(struct lpfc_hba *phba,
 				int);
 void lpfc_release_io_buf(struct lpfc_hba *phba, struct lpfc_io_buf *ncmd,
 			 struct lpfc_sli4_hdw_queue *qp);
+void lpfc_io_ktime(struct lpfc_hba *phba, struct lpfc_io_buf *ncmd);
 void lpfc_nvme_cmd_template(void);
 void lpfc_nvmet_cmd_template(void);
 void lpfc_nvme_cancel_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *pwqeIn);
diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c
index 58b35a1..2aa578d 100644
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2017-2019 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2020 Broadcom. All Rights Reserved. The term *
  * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.     *
  * Copyright (C) 2004-2016 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
@@ -2073,8 +2073,8 @@ lpfc_fdmi_hba_attr_wwnn(struct lpfc_vport *vport, struct lpfc_fdmi_attr_def *ad)
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, sizeof(struct lpfc_name));
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	memcpy(&ae->un.AttrWWN, &vport->fc_sparam.nodeName,
 	       sizeof(struct lpfc_name));
@@ -2090,8 +2090,8 @@ lpfc_fdmi_hba_attr_manufacturer(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	/* This string MUST be consistent with other FC platforms
 	 * supported by Broadcom.
@@ -2115,8 +2115,8 @@ lpfc_fdmi_hba_attr_sn(struct lpfc_vport *vport, struct lpfc_fdmi_attr_def *ad)
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	strncpy(ae->un.AttrString, phba->SerialNumber,
 		sizeof(ae->un.AttrString));
@@ -2137,8 +2137,8 @@ lpfc_fdmi_hba_attr_model(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	strncpy(ae->un.AttrString, phba->ModelName,
 		sizeof(ae->un.AttrString));
@@ -2158,8 +2158,8 @@ lpfc_fdmi_hba_attr_description(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	strncpy(ae->un.AttrString, phba->ModelDesc,
 		sizeof(ae->un.AttrString));
@@ -2181,8 +2181,8 @@ lpfc_fdmi_hba_attr_hdw_ver(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t i, j, incr, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	/* Convert JEDEC ID to ascii for hardware version */
 	incr = vp->rev.biuRev;
@@ -2211,8 +2211,8 @@ lpfc_fdmi_hba_attr_drvr_ver(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	strncpy(ae->un.AttrString, lpfc_release_version,
 		sizeof(ae->un.AttrString));
@@ -2233,8 +2233,8 @@ lpfc_fdmi_hba_attr_rom_ver(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	if (phba->sli_rev == LPFC_SLI_REV4)
 		lpfc_decode_firmware_rev(phba, ae->un.AttrString, 1);
@@ -2258,8 +2258,8 @@ lpfc_fdmi_hba_attr_fmw_ver(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	lpfc_decode_firmware_rev(phba, ae->un.AttrString, 1);
 	len = strnlen(ae->un.AttrString,
@@ -2278,8 +2278,8 @@ lpfc_fdmi_hba_attr_os_ver(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	snprintf(ae->un.AttrString, sizeof(ae->un.AttrString), "%s %s %s",
 		 init_utsname()->sysname,
@@ -2301,7 +2301,7 @@ lpfc_fdmi_hba_attr_ct_len(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 
 	ae->un.AttrInt =  cpu_to_be32(LPFC_MAX_CT_SIZE);
 	size = FOURBYTES + sizeof(uint32_t);
@@ -2317,8 +2317,8 @@ lpfc_fdmi_hba_attr_symbolic_name(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	len = lpfc_vport_symbolic_node_name(vport,
 				ae->un.AttrString, 256);
@@ -2336,7 +2336,7 @@ lpfc_fdmi_hba_attr_vendor_info(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 
 	/* Nothing is defined for this currently */
 	ae->un.AttrInt =  cpu_to_be32(0);
@@ -2353,7 +2353,7 @@ lpfc_fdmi_hba_attr_num_ports(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 
 	/* Each driver instance corresponds to a single port */
 	ae->un.AttrInt =  cpu_to_be32(1);
@@ -2370,8 +2370,8 @@ lpfc_fdmi_hba_attr_fabric_wwnn(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, sizeof(struct lpfc_name));
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	memcpy(&ae->un.AttrWWN, &vport->fabric_nodename,
 	       sizeof(struct lpfc_name));
@@ -2389,8 +2389,8 @@ lpfc_fdmi_hba_attr_bios_ver(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	strlcat(ae->un.AttrString, phba->BIOSVersion,
 		sizeof(ae->un.AttrString));
@@ -2410,7 +2410,7 @@ lpfc_fdmi_hba_attr_bios_state(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 
 	/* Driver doesn't have access to this information */
 	ae->un.AttrInt =  cpu_to_be32(0);
@@ -2427,8 +2427,8 @@ lpfc_fdmi_hba_attr_vendor_id(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	strncpy(ae->un.AttrString, "EMULEX",
 		sizeof(ae->un.AttrString));
@@ -2450,10 +2450,9 @@ lpfc_fdmi_port_attr_fc4type(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 32);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
-	ae->un.AttrTypes[3] = 0x02; /* Type 0x1 - ELS */
 	ae->un.AttrTypes[2] = 0x01; /* Type 0x8 - FCP */
 	ae->un.AttrTypes[7] = 0x01; /* Type 0x20 - CT */
 
@@ -2476,7 +2475,7 @@ lpfc_fdmi_port_attr_support_speed(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 
 	ae->un.AttrInt = 0;
 	if (!(phba->hba_flag & HBA_FCOE_MODE)) {
@@ -2530,7 +2529,7 @@ lpfc_fdmi_port_attr_speed(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 
 	if (!(phba->hba_flag & HBA_FCOE_MODE)) {
 		switch (phba->fc_linkspeed) {
@@ -2600,7 +2599,7 @@ lpfc_fdmi_port_attr_max_frame(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 
 	hsp = (struct serv_parm *)&vport->fc_sparam;
 	ae->un.AttrInt = (((uint32_t) hsp->cmn.bbRcvSizeMsb & 0x0F) << 8) |
@@ -2620,8 +2619,8 @@ lpfc_fdmi_port_attr_os_devname(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	snprintf(ae->un.AttrString, sizeof(ae->un.AttrString),
 		 "/sys/class/scsi_host/host%d", shost->host_no);
@@ -2641,8 +2640,8 @@ lpfc_fdmi_port_attr_host_name(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	scnprintf(ae->un.AttrString, sizeof(ae->un.AttrString), "%s",
 		  vport->phba->os_host_name);
@@ -2662,8 +2661,8 @@ lpfc_fdmi_port_attr_wwnn(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0,  sizeof(struct lpfc_name));
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	memcpy(&ae->un.AttrWWN, &vport->fc_sparam.nodeName,
 	       sizeof(struct lpfc_name));
@@ -2680,8 +2679,8 @@ lpfc_fdmi_port_attr_wwpn(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0,  sizeof(struct lpfc_name));
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	memcpy(&ae->un.AttrWWN, &vport->fc_sparam.portName,
 	       sizeof(struct lpfc_name));
@@ -2698,8 +2697,8 @@ lpfc_fdmi_port_attr_symbolic_name(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	len = lpfc_vport_symbolic_port_name(vport, ae->un.AttrString, 256);
 	len += (len & 3) ? (4 - (len & 3)) : 4;
@@ -2717,7 +2716,7 @@ lpfc_fdmi_port_attr_port_type(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 	if (phba->fc_topology == LPFC_TOPOLOGY_LOOP)
 		ae->un.AttrInt =  cpu_to_be32(LPFC_FDMI_PORTTYPE_NLPORT);
 	else
@@ -2735,7 +2734,7 @@ lpfc_fdmi_port_attr_class(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 	ae->un.AttrInt = cpu_to_be32(FC_COS_CLASS2 | FC_COS_CLASS3);
 	size = FOURBYTES + sizeof(uint32_t);
 	ad->AttrLen = cpu_to_be16(size);
@@ -2750,8 +2749,8 @@ lpfc_fdmi_port_attr_fabric_wwpn(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0,  sizeof(struct lpfc_name));
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	memcpy(&ae->un.AttrWWN, &vport->fabric_portname,
 	       sizeof(struct lpfc_name));
@@ -2768,10 +2767,9 @@ lpfc_fdmi_port_attr_active_fc4type(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 32);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
-	ae->un.AttrTypes[3] = 0x02; /* Type 0x1 - ELS */
 	ae->un.AttrTypes[2] = 0x01; /* Type 0x8 - FCP */
 	ae->un.AttrTypes[7] = 0x01; /* Type 0x20 - CT */
 
@@ -2792,7 +2790,7 @@ lpfc_fdmi_port_attr_port_state(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 	/* Link Up - operational */
 	ae->un.AttrInt =  cpu_to_be32(LPFC_FDMI_PORTSTATE_ONLINE);
 	size = FOURBYTES + sizeof(uint32_t);
@@ -2808,7 +2806,7 @@ lpfc_fdmi_port_attr_num_disc(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 	vport->fdmi_num_disc = lpfc_find_map_node(vport);
 	ae->un.AttrInt = cpu_to_be32(vport->fdmi_num_disc);
 	size = FOURBYTES + sizeof(uint32_t);
@@ -2824,7 +2822,7 @@ lpfc_fdmi_port_attr_nportid(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 	ae->un.AttrInt =  cpu_to_be32(vport->fc_myDID);
 	size = FOURBYTES + sizeof(uint32_t);
 	ad->AttrLen = cpu_to_be16(size);
@@ -2839,8 +2837,8 @@ lpfc_fdmi_smart_attr_service(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	strncpy(ae->un.AttrString, "Smart SAN Initiator",
 		sizeof(ae->un.AttrString));
@@ -2860,8 +2858,8 @@ lpfc_fdmi_smart_attr_guid(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	memcpy(&ae->un.AttrString, &vport->fc_sparam.nodeName,
 	       sizeof(struct lpfc_name));
@@ -2881,8 +2879,8 @@ lpfc_fdmi_smart_attr_version(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	strncpy(ae->un.AttrString, "Smart SAN Version 2.0",
 		sizeof(ae->un.AttrString));
@@ -2903,8 +2901,8 @@ lpfc_fdmi_smart_attr_model(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	strncpy(ae->un.AttrString, phba->ModelName,
 		sizeof(ae->un.AttrString));
@@ -2923,7 +2921,7 @@ lpfc_fdmi_smart_attr_port_info(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 
 	/* SRIOV (type 3) is not supported */
 	if (vport->vpi)
@@ -2943,7 +2941,7 @@ lpfc_fdmi_smart_attr_qos(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 	ae->un.AttrInt =  cpu_to_be32(0);
 	size = FOURBYTES + sizeof(uint32_t);
 	ad->AttrLen = cpu_to_be16(size);
@@ -2958,7 +2956,7 @@ lpfc_fdmi_smart_attr_security(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 	ae->un.AttrInt =  cpu_to_be32(1);
 	size = FOURBYTES + sizeof(uint32_t);
 	ad->AttrLen = cpu_to_be16(size);
@@ -3106,7 +3104,8 @@ lpfc_fdmi_cmd(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 			/* Registered Port List */
 			/* One entry (port) per adapter */
 			rh->rpl.EntryCnt = cpu_to_be32(1);
-			memcpy(&rh->rpl.pe, &phba->pport->fc_sparam.portName,
+			memcpy(&rh->rpl.pe.PortName,
+			       &phba->pport->fc_sparam.portName,
 			       sizeof(struct lpfc_name));
 
 			/* point to the HBA attribute block */
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
index 819335b..8a6e02a 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -1300,8 +1300,88 @@ lpfc_debugfs_scsistat_data(struct lpfc_vport *vport, char *buf, int size)
 	return len;
 }
 
+void
+lpfc_io_ktime(struct lpfc_hba *phba, struct lpfc_io_buf *lpfc_cmd)
+{
+	uint64_t seg1, seg2, seg3, seg4;
+	uint64_t segsum;
+
+	if (!lpfc_cmd->ts_last_cmd ||
+	    !lpfc_cmd->ts_cmd_start ||
+	    !lpfc_cmd->ts_cmd_wqput ||
+	    !lpfc_cmd->ts_isr_cmpl ||
+	    !lpfc_cmd->ts_data_io)
+		return;
+
+	if (lpfc_cmd->ts_data_io < lpfc_cmd->ts_cmd_start)
+		return;
+	if (lpfc_cmd->ts_cmd_start < lpfc_cmd->ts_last_cmd)
+		return;
+	if (lpfc_cmd->ts_cmd_wqput < lpfc_cmd->ts_cmd_start)
+		return;
+	if (lpfc_cmd->ts_isr_cmpl < lpfc_cmd->ts_cmd_wqput)
+		return;
+	if (lpfc_cmd->ts_data_io < lpfc_cmd->ts_isr_cmpl)
+		return;
+	/*
+	 * Segment 1 - Time from Last FCP command cmpl is handed
+	 * off to NVME Layer to start of next command.
+	 * Segment 2 - Time from Driver receives a IO cmd start
+	 * from NVME Layer to WQ put is done on IO cmd.
+	 * Segment 3 - Time from Driver WQ put is done on IO cmd
+	 * to MSI-X ISR for IO cmpl.
+	 * Segment 4 - Time from MSI-X ISR for IO cmpl to when
+	 * cmpl is handled off to the NVME Layer.
+	 */
+	seg1 = lpfc_cmd->ts_cmd_start - lpfc_cmd->ts_last_cmd;
+	if (seg1 > 5000000)  /* 5 ms - for sequential IOs only */
+		seg1 = 0;
+
+	/* Calculate times relative to start of IO */
+	seg2 = (lpfc_cmd->ts_cmd_wqput - lpfc_cmd->ts_cmd_start);
+	segsum = seg2;
+	seg3 = lpfc_cmd->ts_isr_cmpl - lpfc_cmd->ts_cmd_start;
+	if (segsum > seg3)
+		return;
+	seg3 -= segsum;
+	segsum += seg3;
+
+	seg4 = lpfc_cmd->ts_data_io - lpfc_cmd->ts_cmd_start;
+	if (segsum > seg4)
+		return;
+	seg4 -= segsum;
+
+	phba->ktime_data_samples++;
+	phba->ktime_seg1_total += seg1;
+	if (seg1 < phba->ktime_seg1_min)
+		phba->ktime_seg1_min = seg1;
+	else if (seg1 > phba->ktime_seg1_max)
+		phba->ktime_seg1_max = seg1;
+	phba->ktime_seg2_total += seg2;
+	if (seg2 < phba->ktime_seg2_min)
+		phba->ktime_seg2_min = seg2;
+	else if (seg2 > phba->ktime_seg2_max)
+		phba->ktime_seg2_max = seg2;
+	phba->ktime_seg3_total += seg3;
+	if (seg3 < phba->ktime_seg3_min)
+		phba->ktime_seg3_min = seg3;
+	else if (seg3 > phba->ktime_seg3_max)
+		phba->ktime_seg3_max = seg3;
+	phba->ktime_seg4_total += seg4;
+	if (seg4 < phba->ktime_seg4_min)
+		phba->ktime_seg4_min = seg4;
+	else if (seg4 > phba->ktime_seg4_max)
+		phba->ktime_seg4_max = seg4;
+
+	lpfc_cmd->ts_last_cmd = 0;
+	lpfc_cmd->ts_cmd_start = 0;
+	lpfc_cmd->ts_cmd_wqput  = 0;
+	lpfc_cmd->ts_isr_cmpl = 0;
+	lpfc_cmd->ts_data_io = 0;
+}
+
 /**
- * lpfc_debugfs_nvmektime_data - Dump target node list to a buffer
+ * lpfc_debugfs_ioktime_data - Dump target node list to a buffer
  * @vport: The vport to gather target node info from.
  * @buf: The buffer to dump log into.
  * @size: The maximum amount of data to process.
@@ -1314,13 +1394,13 @@ lpfc_debugfs_scsistat_data(struct lpfc_vport *vport, char *buf, int size)
  * not exceed @size.
  **/
 static int
-lpfc_debugfs_nvmektime_data(struct lpfc_vport *vport, char *buf, int size)
+lpfc_debugfs_ioktime_data(struct lpfc_vport *vport, char *buf, int size)
 {
 	struct lpfc_hba   *phba = vport->phba;
 	int len = 0;
 
 	if (phba->nvmet_support == 0) {
-		/* NVME Initiator */
+		/* Initiator */
 		len += scnprintf(buf + len, PAGE_SIZE - len,
 				"ktime %s: Total Samples: %lld\n",
 				(phba->ktime_on ?  "Enabled" : "Disabled"),
@@ -1330,8 +1410,8 @@ lpfc_debugfs_nvmektime_data(struct lpfc_vport *vport, char *buf, int size)
 
 		len += scnprintf(
 			buf + len, PAGE_SIZE - len,
-			"Segment 1: Last NVME Cmd cmpl "
-			"done -to- Start of next NVME cnd (in driver)\n");
+			"Segment 1: Last Cmd cmpl "
+			"done -to- Start of next Cmd (in driver)\n");
 		len += scnprintf(
 			buf + len, PAGE_SIZE - len,
 			"avg:%08lld min:%08lld max %08lld\n",
@@ -1341,7 +1421,7 @@ lpfc_debugfs_nvmektime_data(struct lpfc_vport *vport, char *buf, int size)
 			phba->ktime_seg1_max);
 		len += scnprintf(
 			buf + len, PAGE_SIZE - len,
-			"Segment 2: Driver start of NVME cmd "
+			"Segment 2: Driver start of Cmd "
 			"-to- Firmware WQ doorbell\n");
 		len += scnprintf(
 			buf + len, PAGE_SIZE - len,
@@ -1364,7 +1444,7 @@ lpfc_debugfs_nvmektime_data(struct lpfc_vport *vport, char *buf, int size)
 		len += scnprintf(
 			buf + len, PAGE_SIZE - len,
 			"Segment 4: MSI-X ISR cmpl -to- "
-			"NVME cmpl done\n");
+			"Cmd cmpl done\n");
 		len += scnprintf(
 			buf + len, PAGE_SIZE - len,
 			"avg:%08lld min:%08lld max %08lld\n",
@@ -1603,42 +1683,50 @@ lpfc_debugfs_nvmeio_trc_data(struct lpfc_hba *phba, char *buf, int size)
 }
 
 /**
- * lpfc_debugfs_cpucheck_data - Dump target node list to a buffer
+ * lpfc_debugfs_hdwqstat_data - Dump I/O stats to a buffer
  * @vport: The vport to gather target node info from.
  * @buf: The buffer to dump log into.
  * @size: The maximum amount of data to process.
  *
  * Description:
- * This routine dumps the NVME statistics associated with @vport
+ * This routine dumps the NVME + SCSI statistics associated with @vport
  *
  * Return Value:
  * This routine returns the amount of bytes that were dumped into @buf and will
  * not exceed @size.
  **/
 static int
-lpfc_debugfs_cpucheck_data(struct lpfc_vport *vport, char *buf, int size)
+lpfc_debugfs_hdwqstat_data(struct lpfc_vport *vport, char *buf, int size)
 {
 	struct lpfc_hba   *phba = vport->phba;
 	struct lpfc_sli4_hdw_queue *qp;
-	int i, j, max_cnt;
-	int len = 0;
+	struct lpfc_hdwq_stat *c_stat;
+	int i, j, len;
 	uint32_t tot_xmt;
 	uint32_t tot_rcv;
 	uint32_t tot_cmpl;
+	char tmp[LPFC_MAX_SCSI_INFO_TMP_LEN] = {0};
 
-	len += scnprintf(buf + len, PAGE_SIZE - len,
-			"CPUcheck %s ",
-			(phba->cpucheck_on & LPFC_CHECK_NVME_IO ?
-				"Enabled" : "Disabled"));
-	if (phba->nvmet_support) {
-		len += scnprintf(buf + len, PAGE_SIZE - len,
-				"%s\n",
-				(phba->cpucheck_on & LPFC_CHECK_NVMET_RCV ?
-					"Rcv Enabled\n" : "Rcv Disabled\n"));
-	} else {
-		len += scnprintf(buf + len, PAGE_SIZE - len, "\n");
-	}
-	max_cnt = size - LPFC_DEBUG_OUT_LINE_SZ;
+	scnprintf(tmp, sizeof(tmp), "HDWQ Stats:\n\n");
+	if (strlcat(buf, tmp, size) >= size)
+		goto buffer_done;
+
+	scnprintf(tmp, sizeof(tmp), "(NVME Accounting: %s) ",
+		  (phba->hdwqstat_on &
+		  (LPFC_CHECK_NVME_IO | LPFC_CHECK_NVMET_IO) ?
+		  "Enabled" : "Disabled"));
+	if (strlcat(buf, tmp, size) >= size)
+		goto buffer_done;
+
+	scnprintf(tmp, sizeof(tmp), "(SCSI Accounting: %s) ",
+		  (phba->hdwqstat_on & LPFC_CHECK_SCSI_IO ?
+		  "Enabled" : "Disabled"));
+	if (strlcat(buf, tmp, size) >= size)
+		goto buffer_done;
+
+	scnprintf(tmp, sizeof(tmp), "\n\n");
+	if (strlcat(buf, tmp, size) >= size)
+		goto buffer_done;
 
 	for (i = 0; i < phba->cfg_hdw_queue; i++) {
 		qp = &phba->sli4_hba.hdwq[i];
@@ -1646,46 +1734,76 @@ lpfc_debugfs_cpucheck_data(struct lpfc_vport *vport, char *buf, int size)
 		tot_rcv = 0;
 		tot_xmt = 0;
 		tot_cmpl = 0;
-		for (j = 0; j < LPFC_CHECK_CPU_CNT; j++) {
-			tot_xmt += qp->cpucheck_xmt_io[j];
-			tot_cmpl += qp->cpucheck_cmpl_io[j];
+
+		for_each_present_cpu(j) {
+			c_stat = per_cpu_ptr(phba->sli4_hba.c_stat, j);
+
+			/* Only display for this HDWQ */
+			if (i != c_stat->hdwq_no)
+				continue;
+
+			/* Only display non-zero counters */
+			if (!c_stat->xmt_io && !c_stat->cmpl_io &&
+			    !c_stat->rcv_io)
+				continue;
+
+			if (!tot_xmt && !tot_cmpl && !tot_rcv) {
+				/* Print HDWQ string only the first time */
+				scnprintf(tmp, sizeof(tmp), "[HDWQ %d]:\t", i);
+				if (strlcat(buf, tmp, size) >= size)
+					goto buffer_done;
+			}
+
+			tot_xmt += c_stat->xmt_io;
+			tot_cmpl += c_stat->cmpl_io;
 			if (phba->nvmet_support)
-				tot_rcv += qp->cpucheck_rcv_io[j];
+				tot_rcv += c_stat->rcv_io;
+
+			scnprintf(tmp, sizeof(tmp), "| [CPU %d]: ", j);
+			if (strlcat(buf, tmp, size) >= size)
+				goto buffer_done;
+
+			if (phba->nvmet_support) {
+				scnprintf(tmp, sizeof(tmp),
+					  "XMT 0x%x CMPL 0x%x RCV 0x%x |",
+					  c_stat->xmt_io, c_stat->cmpl_io,
+					  c_stat->rcv_io);
+				if (strlcat(buf, tmp, size) >= size)
+					goto buffer_done;
+			} else {
+				scnprintf(tmp, sizeof(tmp),
+					  "XMT 0x%x CMPL 0x%x |",
+					  c_stat->xmt_io, c_stat->cmpl_io);
+				if (strlcat(buf, tmp, size) >= size)
+					goto buffer_done;
+			}
 		}
 
-		/* Only display Hardware Qs with something */
+		/* Check if nothing to display */
 		if (!tot_xmt && !tot_cmpl && !tot_rcv)
 			continue;
 
-		len += scnprintf(buf + len, PAGE_SIZE - len,
-				"HDWQ %03d: ", i);
-		for (j = 0; j < LPFC_CHECK_CPU_CNT; j++) {
-			/* Only display non-zero counters */
-			if (!qp->cpucheck_xmt_io[j] &&
-			    !qp->cpucheck_cmpl_io[j] &&
-			    !qp->cpucheck_rcv_io[j])
-				continue;
-			if (phba->nvmet_support) {
-				len += scnprintf(buf + len, PAGE_SIZE - len,
-						"CPU %03d: %x/%x/%x ", j,
-						qp->cpucheck_rcv_io[j],
-						qp->cpucheck_xmt_io[j],
-						qp->cpucheck_cmpl_io[j]);
-			} else {
-				len += scnprintf(buf + len, PAGE_SIZE - len,
-						"CPU %03d: %x/%x ", j,
-						qp->cpucheck_xmt_io[j],
-						qp->cpucheck_cmpl_io[j]);
-			}
-		}
-		len += scnprintf(buf + len, PAGE_SIZE - len,
-				"Total: %x\n", tot_xmt);
-		if (len >= max_cnt) {
-			len += scnprintf(buf + len, PAGE_SIZE - len,
-					"Truncated ...\n");
-			return len;
+		scnprintf(tmp, sizeof(tmp), "\t->\t[HDWQ Total: ");
+		if (strlcat(buf, tmp, size) >= size)
+			goto buffer_done;
+
+		if (phba->nvmet_support) {
+			scnprintf(tmp, sizeof(tmp),
+				  "XMT 0x%x CMPL 0x%x RCV 0x%x]\n\n",
+				  tot_xmt, tot_cmpl, tot_rcv);
+			if (strlcat(buf, tmp, size) >= size)
+				goto buffer_done;
+		} else {
+			scnprintf(tmp, sizeof(tmp),
+				  "XMT 0x%x CMPL 0x%x]\n\n",
+				  tot_xmt, tot_cmpl);
+			if (strlcat(buf, tmp, size) >= size)
+				goto buffer_done;
 		}
 	}
+
+buffer_done:
+	len = strnlen(buf, size);
 	return len;
 }
 
@@ -2689,7 +2807,7 @@ lpfc_debugfs_scsistat_write(struct file *file, const char __user *buf,
 }
 
 static int
-lpfc_debugfs_nvmektime_open(struct inode *inode, struct file *file)
+lpfc_debugfs_ioktime_open(struct inode *inode, struct file *file)
 {
 	struct lpfc_vport *vport = inode->i_private;
 	struct lpfc_debug *debug;
@@ -2700,14 +2818,14 @@ lpfc_debugfs_nvmektime_open(struct inode *inode, struct file *file)
 		goto out;
 
 	 /* Round to page boundary */
-	debug->buffer = kmalloc(LPFC_NVMEKTIME_SIZE, GFP_KERNEL);
+	debug->buffer = kmalloc(LPFC_IOKTIME_SIZE, GFP_KERNEL);
 	if (!debug->buffer) {
 		kfree(debug);
 		goto out;
 	}
 
-	debug->len = lpfc_debugfs_nvmektime_data(vport, debug->buffer,
-		LPFC_NVMEKTIME_SIZE);
+	debug->len = lpfc_debugfs_ioktime_data(vport, debug->buffer,
+		LPFC_IOKTIME_SIZE);
 
 	debug->i_private = inode->i_private;
 	file->private_data = debug;
@@ -2718,8 +2836,8 @@ lpfc_debugfs_nvmektime_open(struct inode *inode, struct file *file)
 }
 
 static ssize_t
-lpfc_debugfs_nvmektime_write(struct file *file, const char __user *buf,
-			     size_t nbytes, loff_t *ppos)
+lpfc_debugfs_ioktime_write(struct file *file, const char __user *buf,
+			   size_t nbytes, loff_t *ppos)
 {
 	struct lpfc_debug *debug = file->private_data;
 	struct lpfc_vport *vport = (struct lpfc_vport *)debug->i_private;
@@ -2921,7 +3039,7 @@ lpfc_debugfs_nvmeio_trc_write(struct file *file, const char __user *buf,
 }
 
 static int
-lpfc_debugfs_cpucheck_open(struct inode *inode, struct file *file)
+lpfc_debugfs_hdwqstat_open(struct inode *inode, struct file *file)
 {
 	struct lpfc_vport *vport = inode->i_private;
 	struct lpfc_debug *debug;
@@ -2932,14 +3050,14 @@ lpfc_debugfs_cpucheck_open(struct inode *inode, struct file *file)
 		goto out;
 
 	 /* Round to page boundary */
-	debug->buffer = kmalloc(LPFC_CPUCHECK_SIZE, GFP_KERNEL);
+	debug->buffer = kcalloc(1, LPFC_SCSISTAT_SIZE, GFP_KERNEL);
 	if (!debug->buffer) {
 		kfree(debug);
 		goto out;
 	}
 
-	debug->len = lpfc_debugfs_cpucheck_data(vport, debug->buffer,
-		LPFC_CPUCHECK_SIZE);
+	debug->len = lpfc_debugfs_hdwqstat_data(vport, debug->buffer,
+						LPFC_SCSISTAT_SIZE);
 
 	debug->i_private = inode->i_private;
 	file->private_data = debug;
@@ -2950,16 +3068,16 @@ lpfc_debugfs_cpucheck_open(struct inode *inode, struct file *file)
 }
 
 static ssize_t
-lpfc_debugfs_cpucheck_write(struct file *file, const char __user *buf,
+lpfc_debugfs_hdwqstat_write(struct file *file, const char __user *buf,
 			    size_t nbytes, loff_t *ppos)
 {
 	struct lpfc_debug *debug = file->private_data;
 	struct lpfc_vport *vport = (struct lpfc_vport *)debug->i_private;
 	struct lpfc_hba   *phba = vport->phba;
-	struct lpfc_sli4_hdw_queue *qp;
+	struct lpfc_hdwq_stat *c_stat;
 	char mybuf[64];
 	char *pbuf;
-	int i, j;
+	int i;
 
 	if (nbytes > 64)
 		nbytes = 64;
@@ -2972,41 +3090,39 @@ lpfc_debugfs_cpucheck_write(struct file *file, const char __user *buf,
 
 	if ((strncmp(pbuf, "on", sizeof("on") - 1) == 0)) {
 		if (phba->nvmet_support)
-			phba->cpucheck_on |= LPFC_CHECK_NVMET_IO;
+			phba->hdwqstat_on |= LPFC_CHECK_NVMET_IO;
 		else
-			phba->cpucheck_on |= (LPFC_CHECK_NVME_IO |
+			phba->hdwqstat_on |= (LPFC_CHECK_NVME_IO |
 				LPFC_CHECK_SCSI_IO);
 		return strlen(pbuf);
 	} else if ((strncmp(pbuf, "nvme_on", sizeof("nvme_on") - 1) == 0)) {
 		if (phba->nvmet_support)
-			phba->cpucheck_on |= LPFC_CHECK_NVMET_IO;
+			phba->hdwqstat_on |= LPFC_CHECK_NVMET_IO;
 		else
-			phba->cpucheck_on |= LPFC_CHECK_NVME_IO;
+			phba->hdwqstat_on |= LPFC_CHECK_NVME_IO;
 		return strlen(pbuf);
 	} else if ((strncmp(pbuf, "scsi_on", sizeof("scsi_on") - 1) == 0)) {
-		phba->cpucheck_on |= LPFC_CHECK_SCSI_IO;
+		if (!phba->nvmet_support)
+			phba->hdwqstat_on |= LPFC_CHECK_SCSI_IO;
 		return strlen(pbuf);
-	} else if ((strncmp(pbuf, "rcv",
-		   sizeof("rcv") - 1) == 0)) {
-		if (phba->nvmet_support)
-			phba->cpucheck_on |= LPFC_CHECK_NVMET_RCV;
-		else
-			return -EINVAL;
+	} else if ((strncmp(pbuf, "nvme_off", sizeof("nvme_off") - 1) == 0)) {
+		phba->hdwqstat_on &= ~(LPFC_CHECK_NVME_IO |
+				       LPFC_CHECK_NVMET_IO);
+		return strlen(pbuf);
+	} else if ((strncmp(pbuf, "scsi_off", sizeof("scsi_off") - 1) == 0)) {
+		phba->hdwqstat_on &= ~LPFC_CHECK_SCSI_IO;
 		return strlen(pbuf);
 	} else if ((strncmp(pbuf, "off",
 		   sizeof("off") - 1) == 0)) {
-		phba->cpucheck_on = LPFC_CHECK_OFF;
+		phba->hdwqstat_on = LPFC_CHECK_OFF;
 		return strlen(pbuf);
 	} else if ((strncmp(pbuf, "zero",
 		   sizeof("zero") - 1) == 0)) {
-		for (i = 0; i < phba->cfg_hdw_queue; i++) {
-			qp = &phba->sli4_hba.hdwq[i];
-
-			for (j = 0; j < LPFC_CHECK_CPU_CNT; j++) {
-				qp->cpucheck_rcv_io[j] = 0;
-				qp->cpucheck_xmt_io[j] = 0;
-				qp->cpucheck_cmpl_io[j] = 0;
-			}
+		for_each_present_cpu(i) {
+			c_stat = per_cpu_ptr(phba->sli4_hba.c_stat, i);
+			c_stat->xmt_io = 0;
+			c_stat->cmpl_io = 0;
+			c_stat->rcv_io = 0;
 		}
 		return strlen(pbuf);
 	}
@@ -5431,13 +5547,13 @@ static const struct file_operations lpfc_debugfs_op_scsistat = {
 	.release =      lpfc_debugfs_release,
 };
 
-#undef lpfc_debugfs_op_nvmektime
-static const struct file_operations lpfc_debugfs_op_nvmektime = {
+#undef lpfc_debugfs_op_ioktime
+static const struct file_operations lpfc_debugfs_op_ioktime = {
 	.owner =        THIS_MODULE,
-	.open =         lpfc_debugfs_nvmektime_open,
+	.open =         lpfc_debugfs_ioktime_open,
 	.llseek =       lpfc_debugfs_lseek,
 	.read =         lpfc_debugfs_read,
-	.write =	lpfc_debugfs_nvmektime_write,
+	.write =	lpfc_debugfs_ioktime_write,
 	.release =      lpfc_debugfs_release,
 };
 
@@ -5451,13 +5567,13 @@ static const struct file_operations lpfc_debugfs_op_nvmeio_trc = {
 	.release =      lpfc_debugfs_release,
 };
 
-#undef lpfc_debugfs_op_cpucheck
-static const struct file_operations lpfc_debugfs_op_cpucheck = {
+#undef lpfc_debugfs_op_hdwqstat
+static const struct file_operations lpfc_debugfs_op_hdwqstat = {
 	.owner =        THIS_MODULE,
-	.open =         lpfc_debugfs_cpucheck_open,
+	.open =         lpfc_debugfs_hdwqstat_open,
 	.llseek =       lpfc_debugfs_lseek,
 	.read =         lpfc_debugfs_read,
-	.write =	lpfc_debugfs_cpucheck_write,
+	.write =	lpfc_debugfs_hdwqstat_write,
 	.release =      lpfc_debugfs_release,
 };
 
@@ -6075,17 +6191,22 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport)
 		goto debug_failed;
 	}
 
-	snprintf(name, sizeof(name), "nvmektime");
-	vport->debug_nvmektime =
+	snprintf(name, sizeof(name), "ioktime");
+	vport->debug_ioktime =
 		debugfs_create_file(name, 0644,
 				    vport->vport_debugfs_root,
-				    vport, &lpfc_debugfs_op_nvmektime);
+				    vport, &lpfc_debugfs_op_ioktime);
+	if (!vport->debug_ioktime) {
+		lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+				 "0815 Cannot create debugfs ioktime\n");
+		goto debug_failed;
+	}
 
-	snprintf(name, sizeof(name), "cpucheck");
-	vport->debug_cpucheck =
+	snprintf(name, sizeof(name), "hdwqstat");
+	vport->debug_hdwqstat =
 		debugfs_create_file(name, 0644,
 				    vport->vport_debugfs_root,
-				    vport, &lpfc_debugfs_op_cpucheck);
+				    vport, &lpfc_debugfs_op_hdwqstat);
 
 	/*
 	 * The following section is for additional directories/files for the
@@ -6216,11 +6337,11 @@ lpfc_debugfs_terminate(struct lpfc_vport *vport)
 	debugfs_remove(vport->debug_scsistat); /* scsistat */
 	vport->debug_scsistat = NULL;
 
-	debugfs_remove(vport->debug_nvmektime); /* nvmektime */
-	vport->debug_nvmektime = NULL;
+	debugfs_remove(vport->debug_ioktime); /* ioktime */
+	vport->debug_ioktime = NULL;
 
-	debugfs_remove(vport->debug_cpucheck); /* cpucheck */
-	vport->debug_cpucheck = NULL;
+	debugfs_remove(vport->debug_hdwqstat); /* hdwqstat */
+	vport->debug_hdwqstat = NULL;
 
 	if (vport->vport_debugfs_root) {
 		debugfs_remove(vport->vport_debugfs_root); /* vportX */
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.h b/drivers/scsi/lpfc/lpfc_debugfs.h
index 20f2537..7ab6d3b 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.h
+++ b/drivers/scsi/lpfc/lpfc_debugfs.h
@@ -46,8 +46,7 @@
 
 /* nvmestat output buffer size */
 #define LPFC_NVMESTAT_SIZE 8192
-#define LPFC_NVMEKTIME_SIZE 8192
-#define LPFC_CPUCHECK_SIZE 8192
+#define LPFC_IOKTIME_SIZE 8192
 #define LPFC_NVMEIO_TRC_SIZE 8192
 
 /* scsistat output buffer size */
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 42a2bf3..80d1e66 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2017-2019 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2020 Broadcom. All Rights Reserved. The term *
  * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.     *
  * Copyright (C) 2004-2016 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
@@ -3008,10 +3008,9 @@ lpfc_issue_els_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
  * This routine is a generic completion callback function for ELS commands.
  * Specifically, it is the callback function which does not need to perform
  * any command specific operations. It is currently used by the ELS command
- * issuing routines for the ELS State Change  Request (SCR),
- * lpfc_issue_els_scr(), and the ELS Fibre Channel Address Resolution
- * Protocol Response (FARPR) routine, lpfc_issue_els_farpr(). Other than
- * certain debug loggings, this callback function simply invokes the
+ * issuing routines for RSCN, lpfc_issue_els_rscn, and the ELS Fibre Channel
+ * Address Resolution Protocol Response (FARPR) routine, lpfc_issue_els_farpr().
+ * Other than certain debug loggings, this callback function simply invokes the
  * lpfc_els_chk_latt() routine to check whether link went down during the
  * discovery process.
  **/
@@ -3025,14 +3024,117 @@ lpfc_cmpl_els_cmd(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 	irsp = &rspiocb->iocb;
 
 	lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD,
-		"ELS cmd cmpl:    status:x%x/x%x did:x%x",
-		irsp->ulpStatus, irsp->un.ulpWord[4],
-		irsp->un.elsreq64.remoteID);
+			      "ELS cmd cmpl:    status:x%x/x%x did:x%x",
+			      irsp->ulpStatus, irsp->un.ulpWord[4],
+			      irsp->un.elsreq64.remoteID);
+
 	/* ELS cmd tag <ulpIoTag> completes */
 	lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
 			 "0106 ELS cmd tag x%x completes Data: x%x x%x x%x\n",
 			 irsp->ulpIoTag, irsp->ulpStatus,
 			 irsp->un.ulpWord[4], irsp->ulpTimeout);
+
+	/* Check to see if link went down during discovery */
+	lpfc_els_chk_latt(vport);
+	lpfc_els_free_iocb(phba, cmdiocb);
+}
+
+/**
+ * lpfc_cmpl_els_disc_cmd - Completion callback function for Discovery ELS cmd
+ * @phba: pointer to lpfc hba data structure.
+ * @cmdiocb: pointer to lpfc command iocb data structure.
+ * @rspiocb: pointer to lpfc response iocb data structure.
+ *
+ * This routine is a generic completion callback function for Discovery ELS cmd.
+ * Currently used by the ELS command issuing routines for the ELS State Change
+ * Request (SCR), lpfc_issue_els_scr() and the ELS RDF, lpfc_issue_els_rdf().
+ * These commands will be retried once only for ELS timeout errors.
+ **/
+static void
+lpfc_cmpl_els_disc_cmd(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
+		       struct lpfc_iocbq *rspiocb)
+{
+	struct lpfc_vport *vport = cmdiocb->vport;
+	IOCB_t *irsp;
+	struct lpfc_els_rdf_rsp *prdf;
+	struct lpfc_dmabuf *pcmd, *prsp;
+	u32 *pdata;
+	u32 cmd;
+
+	irsp = &rspiocb->iocb;
+
+	lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD,
+		"ELS cmd cmpl:    status:x%x/x%x did:x%x",
+		irsp->ulpStatus, irsp->un.ulpWord[4],
+		irsp->un.elsreq64.remoteID);
+	/* ELS cmd tag <ulpIoTag> completes */
+	lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
+			 "0217 ELS cmd tag x%x completes Data: x%x x%x x%x "
+			 "x%x\n",
+			 irsp->ulpIoTag, irsp->ulpStatus,
+			 irsp->un.ulpWord[4], irsp->ulpTimeout,
+			 cmdiocb->retry);
+
+	pcmd = (struct lpfc_dmabuf *)cmdiocb->context2;
+	if (!pcmd)
+		goto out;
+
+	pdata = (u32 *)pcmd->virt;
+	if (!pdata)
+		goto out;
+	cmd = *pdata;
+
+	/* Only 1 retry for ELS Timeout only */
+	if (irsp->ulpStatus == IOSTAT_LOCAL_REJECT &&
+	    ((irsp->un.ulpWord[4] & IOERR_PARAM_MASK) ==
+	    IOERR_SEQUENCE_TIMEOUT)) {
+		cmdiocb->retry++;
+		if (cmdiocb->retry <= 1) {
+			switch (cmd) {
+			case ELS_CMD_SCR:
+				lpfc_issue_els_scr(vport, cmdiocb->retry);
+				break;
+			case ELS_CMD_RDF:
+				cmdiocb->context1 = NULL; /* save ndlp refcnt */
+				lpfc_issue_els_rdf(vport, cmdiocb->retry);
+				break;
+			}
+			goto out;
+		}
+		phba->fc_stat.elsRetryExceeded++;
+	}
+	if (irsp->ulpStatus) {
+		/* ELS discovery cmd completes with error */
+		lpfc_printf_vlog(vport, KERN_WARNING, LOG_ELS,
+				 "4203 ELS cmd x%x error: x%x x%X\n", cmd,
+				 irsp->ulpStatus, irsp->un.ulpWord[4]);
+		goto out;
+	}
+
+	/* The RDF response doesn't have any impact on the running driver
+	 * but the notification descriptors are dumped here for support.
+	 */
+	if (cmd == ELS_CMD_RDF) {
+		int i;
+
+		prsp = list_get_first(&pcmd->list, struct lpfc_dmabuf, list);
+		if (!prsp)
+			goto out;
+
+		prdf = (struct lpfc_els_rdf_rsp *)prsp->virt;
+		if (!prdf)
+			goto out;
+
+		for (i = 0; i < ELS_RDF_REG_TAG_CNT &&
+			    i < be32_to_cpu(prdf->reg_d1.reg_desc.count); i++)
+			lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
+				 "4677 Fabric RDF Notification Grant Data: "
+				 "0x%08x\n",
+				 be32_to_cpu(
+					prdf->reg_d1.desc_tags[i]));
+	}
+
+out:
 	/* Check to see if link went down during discovery */
 	lpfc_els_chk_latt(vport);
 	lpfc_els_free_iocb(phba, cmdiocb);
@@ -3042,11 +3144,10 @@ lpfc_cmpl_els_cmd(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 /**
  * lpfc_issue_els_scr - Issue a scr to an node on a vport
  * @vport: pointer to a host virtual N_Port data structure.
- * @nportid: N_Port identifier to the remote node.
- * @retry: number of retries to the command IOCB.
+ * @retry: retry counter for the command IOCB.
  *
  * This routine issues a State Change Request (SCR) to a fabric node
- * on a @vport. The remote node @nportid is passed into the function. It
+ * on a @vport. The remote node is Fabric Controller (0xfffffd). It
  * first search the @vport node list to find the matching ndlp. If no such
  * ndlp is found, a new ndlp shall be created for this (SCR) purpose. An
  * IOCB is allocated, payload prepared, and the lpfc_sli_issue_iocb()
@@ -3062,7 +3163,7 @@ lpfc_cmpl_els_cmd(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
  *   1 - Failed to issue scr command
  **/
 int
-lpfc_issue_els_scr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry)
+lpfc_issue_els_scr(struct lpfc_vport *vport, uint8_t retry)
 {
 	struct lpfc_hba  *phba = vport->phba;
 	struct lpfc_iocbq *elsiocb;
@@ -3072,9 +3173,9 @@ lpfc_issue_els_scr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry)
 
 	cmdsize = (sizeof(uint32_t) + sizeof(SCR));
 
-	ndlp = lpfc_findnode_did(vport, nportid);
+	ndlp = lpfc_findnode_did(vport, Fabric_Cntl_DID);
 	if (!ndlp) {
-		ndlp = lpfc_nlp_init(vport, nportid);
+		ndlp = lpfc_nlp_init(vport, Fabric_Cntl_DID);
 		if (!ndlp)
 			return 1;
 		lpfc_enqueue_node(vport, ndlp);
@@ -3109,7 +3210,7 @@ lpfc_issue_els_scr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry)
 		ndlp->nlp_DID, 0, 0);
 
 	phba->fc_stat.elsXmitSCR++;
-	elsiocb->iocb_cmpl = lpfc_cmpl_els_cmd;
+	elsiocb->iocb_cmpl = lpfc_cmpl_els_disc_cmd;
 	if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
 	    IOCB_ERROR) {
 		/* The additional lpfc_nlp_put will cause the following
@@ -3339,6 +3440,102 @@ lpfc_issue_els_farpr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry)
 	/* This will cause the callback-function lpfc_cmpl_els_cmd to
 	 * trigger the release of the node.
 	 */
+	/* Don't release reference count as RDF is likely outstanding */
+	return 0;
+}
+
+/**
+ * lpfc_issue_els_rdf - Register for diagnostic functions from the fabric.
+ * @vport: pointer to a host virtual N_Port data structure.
+ * @retry: retry counter for the command IOCB.
+ *
+ * This routine issues an ELS RDF to the Fabric Controller to register
+ * for diagnostic functions.
+ *
+ * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp
+ * will be incremented by 1 for holding the ndlp and the reference to ndlp
+ * will be stored into the context1 field of the IOCB for the completion
+ * callback function to the RDF ELS command.
+ *
+ * Return code
+ *   0 - Successfully issued rdf command
+ *   1 - Failed to issue rdf command
+ **/
+int
+lpfc_issue_els_rdf(struct lpfc_vport *vport, uint8_t retry)
+{
+	struct lpfc_hba *phba = vport->phba;
+	struct lpfc_iocbq *elsiocb;
+	struct lpfc_els_rdf_req *prdf;
+	struct lpfc_nodelist *ndlp;
+	uint16_t cmdsize;
+
+	cmdsize = sizeof(*prdf);
+
+	ndlp = lpfc_findnode_did(vport, Fabric_Cntl_DID);
+	if (!ndlp) {
+		ndlp = lpfc_nlp_init(vport, Fabric_Cntl_DID);
+		if (!ndlp)
+			return -ENODEV;
+		lpfc_enqueue_node(vport, ndlp);
+	} else if (!NLP_CHK_NODE_ACT(ndlp)) {
+		ndlp = lpfc_enable_node(vport, ndlp, NLP_STE_UNUSED_NODE);
+		if (!ndlp)
+			return -ENODEV;
+	}
+
+	/* RDF ELS is not required on an NPIV VN_Port.  */
+	if (vport->port_type == LPFC_NPIV_PORT) {
+		lpfc_nlp_put(ndlp);
+		return -EACCES;
+	}
+
+	elsiocb = lpfc_prep_els_iocb(vport, 1, cmdsize, retry, ndlp,
+				     ndlp->nlp_DID, ELS_CMD_RDF);
+	if (!elsiocb) {
+		/* This will trigger the release of the node just
+		 * allocated
+		 */
+		lpfc_nlp_put(ndlp);
+		return -ENOMEM;
+	}
+
+	/* Configure the payload for the supported FPIN events. */
+	prdf = (struct lpfc_els_rdf_req *)
+		(((struct lpfc_dmabuf *)elsiocb->context2)->virt);
+	memset(prdf, 0, cmdsize);
+	prdf->rdf.fpin_cmd = ELS_RDF;
+	prdf->rdf.desc_len = cpu_to_be32(sizeof(struct lpfc_els_rdf_req) -
+					 sizeof(struct fc_els_rdf));
+	prdf->reg_d1.reg_desc.desc_tag = cpu_to_be32(ELS_DTAG_FPIN_REGISTER);
+	prdf->reg_d1.reg_desc.desc_len = cpu_to_be32(
+				FC_TLV_DESC_LENGTH_FROM_SZ(prdf->reg_d1));
+	prdf->reg_d1.reg_desc.count = cpu_to_be32(ELS_RDF_REG_TAG_CNT);
+	prdf->reg_d1.desc_tags[0] = cpu_to_be32(ELS_DTAG_LNK_INTEGRITY);
+
+	lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD,
+			      "Issue RDF:       did:x%x",
+			      ndlp->nlp_DID, 0, 0);
+
+	lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
+			 "6444 Xmit RDF to remote NPORT x%x\n",
+			 ndlp->nlp_DID);
+
+	elsiocb->iocb_cmpl = lpfc_cmpl_els_disc_cmd;
+	if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
+	    IOCB_ERROR) {
+		/* The additional lpfc_nlp_put will cause the following
+		 * lpfc_els_free_iocb routine to trigger the rlease of
+		 * the node.
+		 */
+		lpfc_nlp_put(ndlp);
+		lpfc_els_free_iocb(phba, elsiocb);
+		return -EIO;
+	}
+
+	/* An RDF was issued - this put ensures the ndlp is cleaned up
+	 * when the RDF completes.
+	 */
 	lpfc_nlp_put(ndlp);
 	return 0;
 }
@@ -7135,108 +7332,12 @@ lpfc_els_rsp_rls_acc(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 }
 
 /**
- * lpfc_els_rsp_rps_acc - Completion callbk func for MBX_READ_LNK_STAT mbox cmd
- * @phba: pointer to lpfc hba data structure.
- * @pmb: pointer to the driver internal queue element for mailbox command.
- *
- * This routine is the completion callback function for the MBX_READ_LNK_STAT
- * mailbox command. This callback function is to actually send the Accept
- * (ACC) response to a Read Port Status (RPS) unsolicited IOCB event. It
- * collects the link statistics from the completion of the MBX_READ_LNK_STAT
- * mailbox command, constructs the RPS response with the link statistics
- * collected, and then invokes the lpfc_sli_issue_iocb() routine to send ACC
- * response to the RPS.
- *
- * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp
- * will be incremented by 1 for holding the ndlp and the reference to ndlp
- * will be stored into the context1 field of the IOCB for the completion
- * callback function to the RPS Accept Response ELS IOCB command.
- *
- **/
-static void
-lpfc_els_rsp_rps_acc(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
-{
-	MAILBOX_t *mb;
-	IOCB_t *icmd;
-	RPS_RSP *rps_rsp;
-	uint8_t *pcmd;
-	struct lpfc_iocbq *elsiocb;
-	struct lpfc_nodelist *ndlp;
-	uint16_t status;
-	uint16_t oxid;
-	uint16_t rxid;
-	uint32_t cmdsize;
-
-	mb = &pmb->u.mb;
-
-	ndlp = (struct lpfc_nodelist *)pmb->ctx_ndlp;
-	rxid = (uint16_t)((unsigned long)(pmb->ctx_buf) & 0xffff);
-	oxid = (uint16_t)(((unsigned long)(pmb->ctx_buf) >> 16) & 0xffff);
-	pmb->ctx_ndlp = NULL;
-	pmb->ctx_buf = NULL;
-
-	if (mb->mbxStatus) {
-		mempool_free(pmb, phba->mbox_mem_pool);
-		return;
-	}
-
-	cmdsize = sizeof(RPS_RSP) + sizeof(uint32_t);
-	mempool_free(pmb, phba->mbox_mem_pool);
-	elsiocb = lpfc_prep_els_iocb(phba->pport, 0, cmdsize,
-				     lpfc_max_els_tries, ndlp,
-				     ndlp->nlp_DID, ELS_CMD_ACC);
-
-	/* Decrement the ndlp reference count from previous mbox command */
-	lpfc_nlp_put(ndlp);
-
-	if (!elsiocb)
-		return;
-
-	icmd = &elsiocb->iocb;
-	icmd->ulpContext = rxid;
-	icmd->unsli3.rcvsli3.ox_id = oxid;
-
-	pcmd = (uint8_t *) (((struct lpfc_dmabuf *) elsiocb->context2)->virt);
-	*((uint32_t *) (pcmd)) = ELS_CMD_ACC;
-	pcmd += sizeof(uint32_t); /* Skip past command */
-	rps_rsp = (RPS_RSP *)pcmd;
-
-	if (phba->fc_topology != LPFC_TOPOLOGY_LOOP)
-		status = 0x10;
-	else
-		status = 0x8;
-	if (phba->pport->fc_flag & FC_FABRIC)
-		status |= 0x4;
-
-	rps_rsp->rsvd1 = 0;
-	rps_rsp->portStatus = cpu_to_be16(status);
-	rps_rsp->linkFailureCnt = cpu_to_be32(mb->un.varRdLnk.linkFailureCnt);
-	rps_rsp->lossSyncCnt = cpu_to_be32(mb->un.varRdLnk.lossSyncCnt);
-	rps_rsp->lossSignalCnt = cpu_to_be32(mb->un.varRdLnk.lossSignalCnt);
-	rps_rsp->primSeqErrCnt = cpu_to_be32(mb->un.varRdLnk.primSeqErrCnt);
-	rps_rsp->invalidXmitWord = cpu_to_be32(mb->un.varRdLnk.invalidXmitWord);
-	rps_rsp->crcCnt = cpu_to_be32(mb->un.varRdLnk.crcCnt);
-	/* Xmit ELS RPS ACC response tag <ulpIoTag> */
-	lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_ELS,
-			 "0118 Xmit ELS RPS ACC response tag x%x xri x%x, "
-			 "did x%x, nlp_flag x%x, nlp_state x%x, rpi x%x\n",
-			 elsiocb->iotag, elsiocb->iocb.ulpContext,
-			 ndlp->nlp_DID, ndlp->nlp_flag, ndlp->nlp_state,
-			 ndlp->nlp_rpi);
-	elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
-	phba->fc_stat.elsXmitACC++;
-	if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) == IOCB_ERROR)
-		lpfc_els_free_iocb(phba, elsiocb);
-	return;
-}
-
-/**
  * lpfc_els_rcv_rls - Process an unsolicited rls iocb
  * @vport: pointer to a host virtual N_Port data structure.
  * @cmdiocb: pointer to lpfc command iocb data structure.
  * @ndlp: pointer to a node-list data structure.
  *
- * This routine processes Read Port Status (RPL) IOCB received as an
+ * This routine processes Read Link Status (RLS) IOCB received as an
  * ELS unsolicited event. It first checks the remote port state. If the
  * remote port is not in NLP_STE_UNMAPPED_NODE state or NLP_STE_MAPPED_NODE
  * state, it invokes the lpfc_els_rsl_reject() routine to send the reject
@@ -7258,7 +7359,7 @@ lpfc_els_rcv_rls(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
 
 	if ((ndlp->nlp_state != NLP_STE_UNMAPPED_NODE) &&
 	    (ndlp->nlp_state != NLP_STE_MAPPED_NODE))
-		/* reject the unsolicited RPS request and done with it */
+		/* reject the unsolicited RLS request and done with it */
 		goto reject_out;
 
 	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_ATOMIC);
@@ -7306,7 +7407,7 @@ lpfc_els_rcv_rls(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
  * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp
  * will be incremented by 1 for holding the ndlp and the reference to ndlp
  * will be stored into the context1 field of the IOCB for the completion
- * callback function to the RPS Accept Response ELS IOCB command.
+ * callback function to the RTV Accept Response ELS IOCB command.
  *
  * Return codes
  *   0 - Successfully processed rtv iocb (currently always return 0)
@@ -7325,7 +7426,7 @@ lpfc_els_rcv_rtv(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
 
 	if ((ndlp->nlp_state != NLP_STE_UNMAPPED_NODE) &&
 	    (ndlp->nlp_state != NLP_STE_MAPPED_NODE))
-		/* reject the unsolicited RPS request and done with it */
+		/* reject the unsolicited RTV request and done with it */
 		goto reject_out;
 
 	cmdsize = sizeof(struct RTV_RSP) + sizeof(uint32_t);
@@ -7378,84 +7479,7 @@ lpfc_els_rcv_rtv(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
 	return 0;
 }
 
-/* lpfc_els_rcv_rps - Process an unsolicited rps iocb
- * @vport: pointer to a host virtual N_Port data structure.
- * @cmdiocb: pointer to lpfc command iocb data structure.
- * @ndlp: pointer to a node-list data structure.
- *
- * This routine processes Read Port Status (RPS) IOCB received as an
- * ELS unsolicited event. It first checks the remote port state. If the
- * remote port is not in NLP_STE_UNMAPPED_NODE state or NLP_STE_MAPPED_NODE
- * state, it invokes the lpfc_els_rsp_reject() routine to send the reject
- * response. Otherwise, it issue the MBX_READ_LNK_STAT mailbox command
- * for reading the HBA link statistics. It is for the callback function,
- * lpfc_els_rsp_rps_acc(), set to the MBX_READ_LNK_STAT mailbox command
- * to actually sending out RPS Accept (ACC) response.
- *
- * Return codes
- *   0 - Successfully processed rps iocb (currently always return 0)
- **/
-static int
-lpfc_els_rcv_rps(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
-		 struct lpfc_nodelist *ndlp)
-{
-	struct lpfc_hba *phba = vport->phba;
-	uint32_t *lp;
-	uint8_t flag;
-	LPFC_MBOXQ_t *mbox;
-	struct lpfc_dmabuf *pcmd;
-	RPS *rps;
-	struct ls_rjt stat;
-
-	if ((ndlp->nlp_state != NLP_STE_UNMAPPED_NODE) &&
-	    (ndlp->nlp_state != NLP_STE_MAPPED_NODE))
-		/* reject the unsolicited RPS request and done with it */
-		goto reject_out;
-
-	pcmd = (struct lpfc_dmabuf *) cmdiocb->context2;
-	lp = (uint32_t *) pcmd->virt;
-	flag = (be32_to_cpu(*lp++) & 0xf);
-	rps = (RPS *) lp;
-
-	if ((flag == 0) ||
-	    ((flag == 1) && (be32_to_cpu(rps->un.portNum) == 0)) ||
-	    ((flag == 2) && (memcmp(&rps->un.portName, &vport->fc_portname,
-				    sizeof(struct lpfc_name)) == 0))) {
-
-		printk("Fix me....\n");
-		dump_stack();
-		mbox = mempool_alloc(phba->mbox_mem_pool, GFP_ATOMIC);
-		if (mbox) {
-			lpfc_read_lnk_stat(phba, mbox);
-			mbox->ctx_buf = (void *)((unsigned long)
-				((cmdiocb->iocb.unsli3.rcvsli3.ox_id << 16) |
-				cmdiocb->iocb.ulpContext)); /* rx_id */
-			mbox->ctx_ndlp = lpfc_nlp_get(ndlp);
-			mbox->vport = vport;
-			mbox->mbox_cmpl = lpfc_els_rsp_rps_acc;
-			if (lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT)
-				!= MBX_NOT_FINISHED)
-				/* Mbox completion will send ELS Response */
-				return 0;
-			/* Decrement reference count used for the failed mbox
-			 * command.
-			 */
-			lpfc_nlp_put(ndlp);
-			mempool_free(mbox, phba->mbox_mem_pool);
-		}
-	}
-
-reject_out:
-	/* issue rejection response */
-	stat.un.b.lsRjtRsvd0 = 0;
-	stat.un.b.lsRjtRsnCode = LSRJT_UNABLE_TPC;
-	stat.un.b.lsRjtRsnCodeExp = LSEXP_CANT_GIVE_DATA;
-	stat.un.b.vendorUnique = 0;
-	lpfc_els_rsp_reject(vport, stat.un.lsRjtError, cmdiocb, ndlp, NULL);
-	return 0;
-}
-
-/* lpfc_issue_els_rrq - Process an unsolicited rps iocb
+/* lpfc_issue_els_rrq - Process an unsolicited rrq iocb
  * @vport: pointer to a host virtual N_Port data structure.
  * @ndlp: pointer to a node-list data structure.
  * @did: DID of the target.
@@ -8310,6 +8334,90 @@ lpfc_send_els_event(struct lpfc_vport *vport,
 }
 
 
+DECLARE_ENUM2STR_LOOKUP(lpfc_get_tlv_dtag_nm, fc_ls_tlv_dtag,
+			FC_LS_TLV_DTAG_INIT);
+
+DECLARE_ENUM2STR_LOOKUP(lpfc_get_fpin_li_event_nm, fc_fpin_li_event_types,
+			FC_FPIN_LI_EVT_TYPES_INIT);
+
+/**
+ * lpfc_els_rcv_fpin_li - Process an FPIN Link Integrity Event.
+ * @vport: Pointer to vport object.
+ * @lnk_not:  Pointer to the Link Integrity Notification Descriptor.
+ *
+ * This function processes a link integrity FPIN event by
+ * logging a message
+ **/
+static void
+lpfc_els_rcv_fpin_li(struct lpfc_vport *vport, struct fc_tlv_desc *tlv)
+{
+	struct fc_fn_li_desc *li = (struct fc_fn_li_desc *)tlv;
+	const char *li_evt_str;
+	u32 li_evt;
+
+	li_evt = be16_to_cpu(li->event_type);
+	li_evt_str = lpfc_get_fpin_li_event_nm(li_evt);
+
+	lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
+			 "4680 FPIN Link Integrity %s (x%x) "
+			 "Detecting PN x%016llx Attached PN x%016llx "
+			 "Duration %d mSecs Count %d Port Cnt %d\n",
+			 li_evt_str, li_evt,
+			 be64_to_cpu(li->detecting_wwpn),
+			 be64_to_cpu(li->attached_wwpn),
+			 be32_to_cpu(li->event_threshold),
+			 be32_to_cpu(li->event_count),
+			 be32_to_cpu(li->pname_count));
+}
+
+static void
+lpfc_els_rcv_fpin(struct lpfc_vport *vport, struct fc_els_fpin *fpin,
+		  u32 fpin_length)
+{
+	struct fc_tlv_desc *tlv;
+	const char *dtag_nm;
+	uint32_t desc_cnt = 0, bytes_remain;
+	u32 dtag;
+
+	/* FPINs handled only if we are in the right discovery state */
+	if (vport->port_state < LPFC_DISC_AUTH)
+		return;
+
+	/* make sure there is the full fpin header */
+	if (fpin_length < sizeof(struct fc_els_fpin))
+		return;
+
+	tlv = (struct fc_tlv_desc *)&fpin->fpin_desc[0];
+	bytes_remain = fpin_length - offsetof(struct fc_els_fpin, fpin_desc);
+	bytes_remain = min_t(u32, bytes_remain, be32_to_cpu(fpin->desc_len));
+
+	/* process each descriptor */
+	while (bytes_remain >= FC_TLV_DESC_HDR_SZ &&
+	       bytes_remain >= FC_TLV_DESC_SZ_FROM_LENGTH(tlv)) {
+
+		dtag = be32_to_cpu(tlv->desc_tag);
+		switch (dtag) {
+		case ELS_DTAG_LNK_INTEGRITY:
+			lpfc_els_rcv_fpin_li(vport, tlv);
+			break;
+		default:
+			dtag_nm = lpfc_get_tlv_dtag_nm(dtag);
+			lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
+					 "4678  skipped FPIN descriptor[%d]: "
+					 "tag x%x (%s)\n",
+					 desc_cnt, dtag, dtag_nm);
+			break;
+		}
+
+		desc_cnt++;
+		bytes_remain -= FC_TLV_DESC_SZ_FROM_LENGTH(tlv);
+		tlv = fc_tlv_next_desc(tlv);
+	}
+
+	fc_host_fpin_rcv(lpfc_shost_from_vport(vport), fpin_length,
+			 (char *)fpin);
+}
+
 /**
  * lpfc_els_unsol_buffer - Process an unsolicited event data buffer
  * @phba: pointer to lpfc hba data structure.
@@ -8331,7 +8439,7 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 	struct Scsi_Host  *shost;
 	struct lpfc_nodelist *ndlp;
 	struct ls_rjt stat;
-	uint32_t *payload;
+	uint32_t *payload, payload_len;
 	uint32_t cmd, did, newnode;
 	uint8_t rjt_exp, rjt_err = 0, init_link = 0;
 	IOCB_t *icmd = &elsiocb->iocb;
@@ -8342,6 +8450,7 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 
 	newnode = 0;
 	payload = ((struct lpfc_dmabuf *)elsiocb->context2)->virt;
+	payload_len = elsiocb->iocb.unsli3.rcvsli3.acc_len;
 	cmd = *payload;
 	if ((phba->sli3_options & LPFC_SLI3_HBQ_ENABLED) == 0)
 		lpfc_post_buffer(phba, pring, 1);
@@ -8632,16 +8741,6 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 		if (newnode)
 			lpfc_nlp_put(ndlp);
 		break;
-	case ELS_CMD_RPS:
-		lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_UNSOL,
-			"RCV RPS:         did:x%x/ste:x%x flg:x%x",
-			did, vport->port_state, ndlp->nlp_flag);
-
-		phba->fc_stat.elsRcvRPS++;
-		lpfc_els_rcv_rps(vport, elsiocb, ndlp);
-		if (newnode)
-			lpfc_nlp_put(ndlp);
-		break;
 	case ELS_CMD_RPL:
 		lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_UNSOL,
 			"RCV RPL:         did:x%x/ste:x%x flg:x%x",
@@ -8697,12 +8796,14 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 		rjt_exp = LSEXP_INVALID_OX_RX;
 		break;
 	case ELS_CMD_FPIN:
-		/*
-		 * Received FPIN from fabric - pass it to the
-		 * transport FPIN handler.
-		 */
-		fc_host_fpin_rcv(shost, elsiocb->iocb.unsli3.rcvsli3.acc_len,
-				(char *)payload);
+		lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_UNSOL,
+				      "RCV FPIN:       did:x%x/ste:x%x flg:x%x",
+				      did, vport->port_state, ndlp->nlp_flag);
+
+		lpfc_els_rcv_fpin(vport, (struct fc_els_fpin *)payload,
+				  payload_len);
+
+		/* There are no replies, so no rjt codes */
 		break;
 	default:
 		lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_UNSOL,
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index dcc8999..789eecbf 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2017-2019 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2020 Broadcom. All Rights Reserved. The term *
  * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.     *
  * Copyright (C) 2004-2016 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
@@ -1163,13 +1163,16 @@ lpfc_mbx_cmpl_local_config_link(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 	}
 
 	/* Start discovery by sending a FLOGI. port_state is identically
-	 * LPFC_FLOGI while waiting for FLOGI cmpl
+	 * LPFC_FLOGI while waiting for FLOGI cmpl. Check if sending
+	 * the FLOGI is being deferred till after MBX_READ_SPARAM completes.
 	 */
-	if (vport->port_state != LPFC_FLOGI)
-		lpfc_initial_flogi(vport);
-	else if (vport->fc_flag & FC_PT2PT)
-		lpfc_disc_start(vport);
-
+	if (vport->port_state != LPFC_FLOGI) {
+		if (!(phba->hba_flag & HBA_DEFER_FLOGI))
+			lpfc_initial_flogi(vport);
+	} else {
+		if (vport->fc_flag & FC_PT2PT)
+			lpfc_disc_start(vport);
+	}
 	return;
 
 out:
@@ -3094,6 +3097,14 @@ lpfc_mbx_cmpl_read_sparam(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 	lpfc_mbuf_free(phba, mp->virt, mp->phys);
 	kfree(mp);
 	mempool_free(pmb, phba->mbox_mem_pool);
+
+	/* Check if sending the FLOGI is being deferred to after we get
+	 * up to date CSPs from MBX_READ_SPARAM.
+	 */
+	if (phba->hba_flag & HBA_DEFER_FLOGI) {
+		lpfc_initial_flogi(vport);
+		phba->hba_flag &= ~HBA_DEFER_FLOGI;
+	}
 	return;
 
 out:
@@ -3224,6 +3235,23 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, struct lpfc_mbx_read_top *la)
 	}
 
 	lpfc_linkup(phba);
+	sparam_mbox = NULL;
+
+	if (!(phba->hba_flag & HBA_FCOE_MODE)) {
+		cfglink_mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+		if (!cfglink_mbox)
+			goto out;
+		vport->port_state = LPFC_LOCAL_CFG_LINK;
+		lpfc_config_link(phba, cfglink_mbox);
+		cfglink_mbox->vport = vport;
+		cfglink_mbox->mbox_cmpl = lpfc_mbx_cmpl_local_config_link;
+		rc = lpfc_sli_issue_mbox(phba, cfglink_mbox, MBX_NOWAIT);
+		if (rc == MBX_NOT_FINISHED) {
+			mempool_free(cfglink_mbox, phba->mbox_mem_pool);
+			goto out;
+		}
+	}
+
 	sparam_mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
 	if (!sparam_mbox)
 		goto out;
@@ -3244,20 +3272,7 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, struct lpfc_mbx_read_top *la)
 		goto out;
 	}
 
-	if (!(phba->hba_flag & HBA_FCOE_MODE)) {
-		cfglink_mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
-		if (!cfglink_mbox)
-			goto out;
-		vport->port_state = LPFC_LOCAL_CFG_LINK;
-		lpfc_config_link(phba, cfglink_mbox);
-		cfglink_mbox->vport = vport;
-		cfglink_mbox->mbox_cmpl = lpfc_mbx_cmpl_local_config_link;
-		rc = lpfc_sli_issue_mbox(phba, cfglink_mbox, MBX_NOWAIT);
-		if (rc == MBX_NOT_FINISHED) {
-			mempool_free(cfglink_mbox, phba->mbox_mem_pool);
-			goto out;
-		}
-	} else {
+	if (phba->hba_flag & HBA_FCOE_MODE) {
 		vport->port_state = LPFC_VPORT_UNKNOWN;
 		/*
 		 * Add the driver's default FCF record at FCF index 0 now. This
@@ -3314,6 +3329,10 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, struct lpfc_mbx_read_top *la)
 		}
 		/* Reset FCF roundrobin bmask for new discovery */
 		lpfc_sli4_clear_fcf_rr_bmask(phba);
+	} else {
+		if (phba->bbcredit_support && phba->cfg_enable_bbcr &&
+		    !(phba->link_flag & LS_LOOPBACK_MODE))
+			phba->hba_flag |= HBA_DEFER_FLOGI;
 	}
 
 	/* Prepare for LINK up registrations */
@@ -4070,7 +4089,9 @@ lpfc_mbx_cmpl_ns_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 				    FC_TYPE_NVME);
 
 		/* Issue SCR just before NameServer GID_FT Query */
-		lpfc_issue_els_scr(vport, SCR_DID, 0);
+		lpfc_issue_els_scr(vport, 0);
+
+		lpfc_issue_els_rdf(vport, 0);
 	}
 
 	vport->fc_ns_retry = 0;
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index 436cdc8..c20034b 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2017-2018 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2020 Broadcom. All Rights Reserved. The term *
  * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.     *
  * Copyright (C) 2004-2016 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
@@ -22,7 +22,7 @@
 
 #define FDMI_DID        0xfffffaU
 #define NameServer_DID  0xfffffcU
-#define SCR_DID         0xfffffdU
+#define Fabric_Cntl_DID 0xfffffdU
 #define Fabric_DID      0xfffffeU
 #define Bcast_DID       0xffffffU
 #define Mask_DID        0xffffffU
@@ -588,6 +588,7 @@ struct fc_vft_header {
 #define ELS_CMD_RRQ       0x12000000
 #define ELS_CMD_REC       0x13000000
 #define ELS_CMD_RDP       0x18000000
+#define ELS_CMD_RDF       0x19000000
 #define ELS_CMD_PRLI      0x20100014
 #define ELS_CMD_NVMEPRLI  0x20140018
 #define ELS_CMD_PRLO      0x21100014
@@ -597,7 +598,6 @@ struct fc_vft_header {
 #define ELS_CMD_ADISC     0x52000000
 #define ELS_CMD_FARP      0x54000000
 #define ELS_CMD_FARPR     0x55000000
-#define ELS_CMD_RPS       0x56000000
 #define ELS_CMD_RPL       0x57000000
 #define ELS_CMD_FAN       0x60000000
 #define ELS_CMD_RSCN      0x61040000
@@ -630,6 +630,7 @@ struct fc_vft_header {
 #define ELS_CMD_RRQ       0x12
 #define ELS_CMD_REC       0x13
 #define ELS_CMD_RDP	  0x18
+#define ELS_CMD_RDF	  0x19
 #define ELS_CMD_PRLI      0x14001020
 #define ELS_CMD_NVMEPRLI  0x18001420
 #define ELS_CMD_PRLO      0x14001021
@@ -639,7 +640,6 @@ struct fc_vft_header {
 #define ELS_CMD_ADISC     0x52
 #define ELS_CMD_FARP      0x54
 #define ELS_CMD_FARPR     0x55
-#define ELS_CMD_RPS       0x56
 #define ELS_CMD_RPL       0x57
 #define ELS_CMD_FAN       0x60
 #define ELS_CMD_RSCN      0x0461
@@ -919,24 +919,6 @@ typedef struct _RNID {		/* Structure is in Big Endian format */
 	} un;
 } __packed RNID;
 
-typedef struct  _RPS {		/* Structure is in Big Endian format */
-	union {
-		uint32_t portNum;
-		struct lpfc_name portName;
-	} un;
-} RPS;
-
-typedef struct  _RPS_RSP {	/* Structure is in Big Endian format */
-	uint16_t rsvd1;
-	uint16_t portStatus;
-	uint32_t linkFailureCnt;
-	uint32_t lossSyncCnt;
-	uint32_t lossSignalCnt;
-	uint32_t primSeqErrCnt;
-	uint32_t invalidXmitWord;
-	uint32_t crcCnt;
-} RPS_RSP;
-
 struct RLS {			/* Structure is in Big Endian format */
 	uint32_t rls;
 #define rls_rsvd_SHIFT		24
@@ -1340,25 +1322,8 @@ struct fc_rdp_res_frame {
 /* lpfc_sli_ct_request defines the CT_IU preamble for FDMI commands */
 #define  SLI_CT_FDMI_Subtypes     0x10	/* Management Service Subtype */
 
-/*
- * Registered Port List Format
- */
-struct lpfc_fdmi_reg_port_list {
-	uint32_t EntryCnt;
-	uint32_t pe;		/* Variable-length array */
-};
-
-
 /* Definitions for HBA / Port attribute entries */
 
-struct lpfc_fdmi_attr_def { /* Defined in TLV format */
-	/* Structure is in Big Endian format */
-	uint32_t AttrType:16;
-	uint32_t AttrLen:16;
-	uint32_t AttrValue;  /* Marks start of Value (ATTRIBUTE_ENTRY) */
-};
-
-
 /* Attribute Entry */
 struct lpfc_fdmi_attr_entry {
 	union {
@@ -1369,7 +1334,13 @@ struct lpfc_fdmi_attr_entry {
 	} un;
 };
 
-#define LPFC_FDMI_MAX_AE_SIZE	sizeof(struct lpfc_fdmi_attr_entry)
+struct lpfc_fdmi_attr_def { /* Defined in TLV format */
+	/* Structure is in Big Endian format */
+	uint32_t AttrType:16;
+	uint32_t AttrLen:16;
+	/* Marks start of Value (ATTRIBUTE_ENTRY) */
+	struct lpfc_fdmi_attr_entry AttrValue;
+} __packed;
 
 /*
  * HBA Attribute Block
@@ -1394,12 +1365,19 @@ struct lpfc_fdmi_hba_ident {
 };
 
 /*
+ * Registered Port List Format
+ */
+struct lpfc_fdmi_reg_port_list {
+	uint32_t EntryCnt;
+	struct lpfc_fdmi_port_entry pe;
+} __packed;
+
+/*
  * Register HBA(RHBA)
  */
 struct lpfc_fdmi_reg_hba {
 	struct lpfc_fdmi_hba_ident hi;
-	struct lpfc_fdmi_reg_port_list rpl;	/* variable-length array */
-/* struct lpfc_fdmi_attr_block   ab; */
+	struct lpfc_fdmi_reg_port_list rpl;
 };
 
 /*
@@ -3284,8 +3262,7 @@ typedef struct {
 #endif
 
 #ifdef __BIG_ENDIAN_BITFIELD
-	uint32_t rsvd1     : 19;  /* Reserved                             */
-	uint32_t cdss      :  1;  /* Configure Data Security SLI          */
+	uint32_t rsvd1     : 20;  /* Reserved                             */
 	uint32_t casabt    :  1;  /* Configure async abts status notice   */
 	uint32_t rsvd2     :  2;  /* Reserved                             */
 	uint32_t cbg       :  1;  /* Configure BlockGuard                 */
@@ -3309,12 +3286,10 @@ typedef struct {
 	uint32_t cbg       :  1;  /* Configure BlockGuard                 */
 	uint32_t rsvd2     :  2;  /* Reserved                             */
 	uint32_t casabt    :  1;  /* Configure async abts status notice   */
-	uint32_t cdss      :  1;  /* Configure Data Security SLI          */
-	uint32_t rsvd1     : 19;  /* Reserved                             */
+	uint32_t rsvd1     : 20;  /* Reserved                             */
 #endif
 #ifdef __BIG_ENDIAN_BITFIELD
-	uint32_t rsvd3     : 19;  /* Reserved                             */
-	uint32_t gdss      :  1;  /* Configure Data Security SLI          */
+	uint32_t rsvd3     : 20;  /* Reserved                             */
 	uint32_t gasabt    :  1;  /* Grant async abts status notice       */
 	uint32_t rsvd4     :  2;  /* Reserved                             */
 	uint32_t gbg       :  1;  /* Grant BlockGuard                     */
@@ -3338,8 +3313,7 @@ typedef struct {
 	uint32_t gbg       :  1;  /* Grant BlockGuard                     */
 	uint32_t rsvd4     :  2;  /* Reserved                             */
 	uint32_t gasabt    :  1;  /* Grant async abts status notice       */
-	uint32_t gdss      :  1;  /* Configure Data Security SLI          */
-	uint32_t rsvd3     : 19;  /* Reserved                             */
+	uint32_t rsvd3     : 20;  /* Reserved                             */
 #endif
 
 #ifdef __BIG_ENDIAN_BITFIELD
@@ -3361,15 +3335,11 @@ typedef struct {
 	uint32_t rsvd6;           /* Reserved                             */
 
 #ifdef __BIG_ENDIAN_BITFIELD
-	uint32_t fips_rev   : 3;   /* FIPS Spec Revision                   */
-	uint32_t fips_level : 4;   /* FIPS Level                           */
-	uint32_t sec_err    : 9;   /* security crypto error                */
+	uint32_t rsvd7      : 16;
 	uint32_t max_vpi    : 16;  /* Max number of virt N-Ports           */
 #else	/*  __LITTLE_ENDIAN */
 	uint32_t max_vpi    : 16;  /* Max number of virt N-Ports           */
-	uint32_t sec_err    : 9;   /* security crypto error                */
-	uint32_t fips_level : 4;   /* FIPS Level                           */
-	uint32_t fips_rev   : 3;   /* FIPS Spec Revision                   */
+	uint32_t rsvd7      : 16;
 #endif
 
 } CONFIG_PORT_VAR;
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index 9a064b9..10c5d1c 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -20,6 +20,8 @@
  * included with this package.                                     *
  *******************************************************************/
 
+#include <uapi/scsi/fc/fc_els.h>
+
 /* Macros to deal with bit fields. Each bit field must have 3 #defines
  * associated with it (_SHIFT, _MASK, and _WORD).
  * EG. For a bit field that is in the 7th bit of the "field4" field of a
@@ -4795,6 +4797,23 @@ struct send_frame_wqe {
 	uint32_t fc_hdr_wd5;           /* word 15 */
 };
 
+#define ELS_RDF_REG_TAG_CNT		1
+struct lpfc_els_rdf_reg_desc {
+	struct fc_df_desc_fpin_reg	reg_desc;	/* descriptor header */
+	__be32				desc_tags[ELS_RDF_REG_TAG_CNT];
+							/* tags in reg_desc */
+};
+
+struct lpfc_els_rdf_req {
+	struct fc_els_rdf		rdf;	   /* hdr up to descriptors */
+	struct lpfc_els_rdf_reg_desc	reg_d1;	/* 1st descriptor */
+};
+
+struct lpfc_els_rdf_rsp {
+	struct fc_els_rdf_resp		rdf_resp;  /* hdr up to descriptors */
+	struct lpfc_els_rdf_reg_desc	reg_d1;	/* 1st descriptor */
+};
+
 union lpfc_wqe {
 	uint32_t words[16];
 	struct lpfc_wqe_generic generic;
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 5a60577..4104bdc 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2017-2019 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2020 Broadcom. All Rights Reserved. The term *
  * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.  *
  * Copyright (C) 2004-2016 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
@@ -512,21 +512,12 @@ lpfc_config_port_post(struct lpfc_hba *phba)
 	lpfc_sli_read_link_ste(phba);
 
 	/* Reset the DFT_HBA_Q_DEPTH to the max xri  */
-	i = (mb->un.varRdConfig.max_xri + 1);
-	if (phba->cfg_hba_queue_depth > i) {
+	if (phba->cfg_hba_queue_depth > mb->un.varRdConfig.max_xri) {
 		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
 				"3359 HBA queue depth changed from %d to %d\n",
-				phba->cfg_hba_queue_depth, i);
-		phba->cfg_hba_queue_depth = i;
-	}
-
-	/* Reset the DFT_LUN_Q_DEPTH to (max xri >> 3)  */
-	i = (mb->un.varRdConfig.max_xri >> 3);
-	if (phba->pport->cfg_lun_queue_depth > i) {
-		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
-				"3360 LUN queue depth changed from %d to %d\n",
-				phba->pport->cfg_lun_queue_depth, i);
-		phba->pport->cfg_lun_queue_depth = i;
+				phba->cfg_hba_queue_depth,
+				mb->un.varRdConfig.max_xri);
+		phba->cfg_hba_queue_depth = mb->un.varRdConfig.max_xri;
 	}
 
 	phba->lmt = mb->un.varRdConfig.lmt;
@@ -4240,6 +4231,7 @@ lpfc_create_port(struct lpfc_hba *phba, int instance, struct device *dev)
 {
 	struct lpfc_vport *vport;
 	struct Scsi_Host  *shost = NULL;
+	struct scsi_host_template *template;
 	int error = 0;
 	int i;
 	uint64_t wwn;
@@ -4268,22 +4260,50 @@ lpfc_create_port(struct lpfc_hba *phba, int instance, struct device *dev)
 		}
 	}
 
-	if (phba->cfg_enable_fc4_type & LPFC_ENABLE_FCP) {
-		if (dev != &phba->pcidev->dev) {
-			shost = scsi_host_alloc(&lpfc_vport_template,
-						sizeof(struct lpfc_vport));
+	/* Seed template for SCSI host registration */
+	if (dev == &phba->pcidev->dev) {
+		template = &phba->port_template;
+
+		if (phba->cfg_enable_fc4_type & LPFC_ENABLE_FCP) {
+			/* Seed physical port template */
+			memcpy(template, &lpfc_template, sizeof(*template));
+
+			if (use_no_reset_hba) {
+				/* template is for a no reset SCSI Host */
+				template->max_sectors = 0xffff;
+				template->eh_host_reset_handler = NULL;
+			}
+
+			/* Template for all vports this physical port creates */
+			memcpy(&phba->vport_template, &lpfc_template,
+			       sizeof(*template));
+			phba->vport_template.max_sectors = 0xffff;
+			phba->vport_template.shost_attrs = lpfc_vport_attrs;
+			phba->vport_template.eh_bus_reset_handler = NULL;
+			phba->vport_template.eh_host_reset_handler = NULL;
+			phba->vport_template.vendor_id = 0;
+
+			/* Initialize the host templates with updated value */
+			if (phba->sli_rev == LPFC_SLI_REV4) {
+				template->sg_tablesize = phba->cfg_scsi_seg_cnt;
+				phba->vport_template.sg_tablesize =
+					phba->cfg_scsi_seg_cnt;
+			} else {
+				template->sg_tablesize = phba->cfg_sg_seg_cnt;
+				phba->vport_template.sg_tablesize =
+					phba->cfg_sg_seg_cnt;
+			}
+
 		} else {
-			if (!use_no_reset_hba)
-				shost = scsi_host_alloc(&lpfc_template,
-						sizeof(struct lpfc_vport));
-			else
-				shost = scsi_host_alloc(&lpfc_template_no_hr,
-						sizeof(struct lpfc_vport));
+			/* NVMET is for physical port only */
+			memcpy(template, &lpfc_template_nvme,
+			       sizeof(*template));
 		}
-	} else if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) {
-		shost = scsi_host_alloc(&lpfc_template_nvme,
-					sizeof(struct lpfc_vport));
+	} else {
+		template = &phba->vport_template;
 	}
+
+	shost = scsi_host_alloc(template, sizeof(struct lpfc_vport));
 	if (!shost)
 		goto out;
 
@@ -4338,6 +4358,12 @@ lpfc_create_port(struct lpfc_hba *phba, int instance, struct device *dev)
 		vport->port_type = LPFC_PHYSICAL_PORT;
 	}
 
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT | LOG_FCP,
+			"9081 CreatePort TMPLATE type %x TBLsize %d "
+			"SEGcnt %d/%d\n",
+			vport->port_type, shost->sg_tablesize,
+			phba->cfg_scsi_seg_cnt, phba->cfg_sg_seg_cnt);
+
 	/* Initialize all internally managed lists. */
 	INIT_LIST_HEAD(&vport->fc_nodes);
 	INIT_LIST_HEAD(&vport->rcv_buffer_list);
@@ -6310,11 +6336,6 @@ lpfc_sli_driver_resource_setup(struct lpfc_hba *phba)
 	 * used to create the sg_dma_buf_pool must be dynamically calculated.
 	 */
 
-	/* Initialize the host templates the configured values. */
-	lpfc_vport_template.sg_tablesize = phba->cfg_sg_seg_cnt;
-	lpfc_template_no_hr.sg_tablesize = phba->cfg_sg_seg_cnt;
-	lpfc_template.sg_tablesize = phba->cfg_sg_seg_cnt;
-
 	if (phba->sli_rev == LPFC_SLI_REV4)
 		entry_sz = sizeof(struct sli4_sge);
 	else
@@ -6355,7 +6376,7 @@ lpfc_sli_driver_resource_setup(struct lpfc_hba *phba)
 	}
 
 	lpfc_printf_log(phba, KERN_INFO, LOG_INIT | LOG_FCP,
-			"9088 sg_tablesize:%d dmabuf_size:%d total_bde:%d\n",
+			"9088 INIT sg_tablesize:%d dmabuf_size:%d total_bde:%d\n",
 			phba->cfg_sg_seg_cnt, phba->cfg_sg_dma_buf_size,
 			phba->cfg_total_seg_cnt);
 
@@ -6825,11 +6846,6 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
 			phba->cfg_nvme_seg_cnt = phba->cfg_sg_seg_cnt;
 	}
 
-	/* Initialize the host templates with the updated values. */
-	lpfc_vport_template.sg_tablesize = phba->cfg_scsi_seg_cnt;
-	lpfc_template.sg_tablesize = phba->cfg_scsi_seg_cnt;
-	lpfc_template_no_hr.sg_tablesize = phba->cfg_scsi_seg_cnt;
-
 	lpfc_printf_log(phba, KERN_INFO, LOG_INIT | LOG_FCP,
 			"9087 sg_seg_cnt:%d dmabuf_size:%d "
 			"total:%d scsi:%d nvme:%d\n",
@@ -6935,6 +6951,17 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
 		rc = -ENOMEM;
 		goto out_free_hba_cpu_map;
 	}
+
+#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
+	phba->sli4_hba.c_stat = alloc_percpu(struct lpfc_hdwq_stat);
+	if (!phba->sli4_hba.c_stat) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"3332 Failed allocating per cpu hdwq stats\n");
+		rc = -ENOMEM;
+		goto out_free_hba_eq_info;
+	}
+#endif
+
 	/*
 	 * Enable sr-iov virtual functions if supported and configured
 	 * through the module parameter.
@@ -6954,6 +6981,10 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
 
 	return 0;
 
+#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
+out_free_hba_eq_info:
+	free_percpu(phba->sli4_hba.eq_info);
+#endif
 out_free_hba_cpu_map:
 	kfree(phba->sli4_hba.cpu_map);
 out_free_hba_eq_hdl:
@@ -6992,6 +7023,9 @@ lpfc_sli4_driver_resource_unset(struct lpfc_hba *phba)
 	struct lpfc_fcf_conn_entry *conn_entry, *next_conn_entry;
 
 	free_percpu(phba->sli4_hba.eq_info);
+#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
+	free_percpu(phba->sli4_hba.c_stat);
+#endif
 
 	/* Free memory allocated for msi-x interrupt vector to CPU mapping */
 	kfree(phba->sli4_hba.cpu_map);
@@ -9235,6 +9269,7 @@ lpfc_sli4_release_hdwq(struct lpfc_hba *phba)
 		/* Free the CQ/WQ corresponding to the Hardware Queue */
 		lpfc_sli4_queue_free(hdwq[idx].io_cq);
 		lpfc_sli4_queue_free(hdwq[idx].io_wq);
+		hdwq[idx].hba_eq = NULL;
 		hdwq[idx].io_cq = NULL;
 		hdwq[idx].io_wq = NULL;
 		if (phba->cfg_xpsgl && !phba->nvmet_support)
@@ -10831,6 +10866,9 @@ lpfc_cpu_affinity_check(struct lpfc_hba *phba, int vectors)
 #ifdef CONFIG_X86
 	struct cpuinfo_x86 *cpuinfo;
 #endif
+#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
+	struct lpfc_hdwq_stat *c_stat;
+#endif
 
 	max_phys_id = 0;
 	min_phys_id = LPFC_VECTOR_MAP_EMPTY;
@@ -11082,10 +11120,17 @@ lpfc_cpu_affinity_check(struct lpfc_hba *phba, int vectors)
 	idx = 0;
 	for_each_possible_cpu(cpu) {
 		cpup = &phba->sli4_hba.cpu_map[cpu];
+#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
+		c_stat = per_cpu_ptr(phba->sli4_hba.c_stat, cpu);
+		c_stat->hdwq_no = cpup->hdwq;
+#endif
 		if (cpup->hdwq != LPFC_VECTOR_MAP_EMPTY)
 			continue;
 
 		cpup->hdwq = idx++ % phba->cfg_hdw_queue;
+#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
+		c_stat->hdwq_no = cpup->hdwq;
+#endif
 		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
 				"3340 Set Affinity: not present "
 				"CPU %d hdwq %d\n",
@@ -11105,15 +11150,19 @@ lpfc_cpu_affinity_check(struct lpfc_hba *phba, int vectors)
  * @cpu:    cpu going offline
  * @eqlist:
  */
-static void
+static int
 lpfc_cpuhp_get_eq(struct lpfc_hba *phba, unsigned int cpu,
 		  struct list_head *eqlist)
 {
 	const struct cpumask *maskp;
 	struct lpfc_queue *eq;
-	cpumask_t tmp;
+	struct cpumask *tmp;
 	u16 idx;
 
+	tmp = kzalloc(cpumask_size(), GFP_KERNEL);
+	if (!tmp)
+		return -ENOMEM;
+
 	for (idx = 0; idx < phba->cfg_irq_chann; idx++) {
 		maskp = pci_irq_get_affinity(phba->pcidev, idx);
 		if (!maskp)
@@ -11123,7 +11172,7 @@ lpfc_cpuhp_get_eq(struct lpfc_hba *phba, unsigned int cpu,
 		 * then we don't need to poll the eq attached
 		 * to it.
 		 */
-		if (!cpumask_and(&tmp, maskp, cpumask_of(cpu)))
+		if (!cpumask_and(tmp, maskp, cpumask_of(cpu)))
 			continue;
 		/* get the cpus that are online and are affini-
 		 * tized to this irq vector.  If the count is
@@ -11131,8 +11180,8 @@ lpfc_cpuhp_get_eq(struct lpfc_hba *phba, unsigned int cpu,
 		 * down this vector.  Since this cpu has not
 		 * gone offline yet, we need >1.
 		 */
-		cpumask_and(&tmp, maskp, cpu_online_mask);
-		if (cpumask_weight(&tmp) > 1)
+		cpumask_and(tmp, maskp, cpu_online_mask);
+		if (cpumask_weight(tmp) > 1)
 			continue;
 
 		/* Now that we have an irq to shutdown, get the eq
@@ -11143,6 +11192,8 @@ lpfc_cpuhp_get_eq(struct lpfc_hba *phba, unsigned int cpu,
 		eq = phba->sli4_hba.hba_eq_hdl[idx].eq;
 		list_add(&eq->_poll_list, eqlist);
 	}
+	kfree(tmp);
+	return 0;
 }
 
 static void __lpfc_cpuhp_remove(struct lpfc_hba *phba)
@@ -11175,11 +11226,9 @@ static void lpfc_cpuhp_add(struct lpfc_hba *phba)
 
 	rcu_read_lock();
 
-	if (!list_empty(&phba->poll_list)) {
-		timer_setup(&phba->cpuhp_poll_timer, lpfc_sli4_poll_hbtimer, 0);
+	if (!list_empty(&phba->poll_list))
 		mod_timer(&phba->cpuhp_poll_timer,
 			  jiffies + msecs_to_jiffies(LPFC_POLL_HB));
-	}
 
 	rcu_read_unlock();
 
@@ -11313,7 +11362,9 @@ static int lpfc_cpu_offline(unsigned int cpu, struct hlist_node *node)
 
 	lpfc_irq_rebalance(phba, cpu, true);
 
-	lpfc_cpuhp_get_eq(phba, cpu, &eqlist);
+	retval = lpfc_cpuhp_get_eq(phba, cpu, &eqlist);
+	if (retval)
+		return retval;
 
 	/* start polling on these eq's */
 	list_for_each_entry_safe(eq, next, &eqlist, _poll_list) {
@@ -13145,6 +13196,7 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid)
 	lpfc_sli4_ras_setup(phba);
 
 	INIT_LIST_HEAD(&phba->poll_list);
+	timer_setup(&phba->cpuhp_poll_timer, lpfc_sli4_poll_hbtimer, 0);
 	cpuhp_state_add_instance_nocalls(lpfc_cpuhp_state, &phba->cpuhp);
 
 	return 0;
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index d1773c0..e35b52b 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -1299,8 +1299,6 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 	if (phba->sli_rev == LPFC_SLI_REV3 && phba->vpd.sli3Feat.cerbm) {
 		if (phba->cfg_enable_bg)
 			mb->un.varCfgPort.cbg = 1; /* configure BlockGuard */
-		if (phba->cfg_enable_dss)
-			mb->un.varCfgPort.cdss = 1; /* Configure Security */
 		mb->un.varCfgPort.cerbm = 1; /* Request HBQs */
 		mb->un.varCfgPort.ccrp = 1; /* Command Ring Polling */
 		mb->un.varCfgPort.max_hbq = lpfc_sli_hbq_count();
diff --git a/drivers/scsi/lpfc/lpfc_nvme.c b/drivers/scsi/lpfc/lpfc_nvme.c
index f6c8963..a45936e 100644
--- a/drivers/scsi/lpfc/lpfc_nvme.c
+++ b/drivers/scsi/lpfc/lpfc_nvme.c
@@ -382,13 +382,15 @@ lpfc_nvme_remoteport_delete(struct nvme_fc_remote_port *remoteport)
 	if (ndlp->upcall_flags & NLP_WAIT_FOR_UNREG) {
 		ndlp->nrport = NULL;
 		ndlp->upcall_flags &= ~NLP_WAIT_FOR_UNREG;
-	}
-	spin_unlock_irq(&vport->phba->hbalock);
+		spin_unlock_irq(&vport->phba->hbalock);
 
-	/* Remove original register reference. The host transport
-	 * won't reference this rport/remoteport any further.
-	 */
-	lpfc_nlp_put(ndlp);
+		/* Remove original register reference. The host transport
+		 * won't reference this rport/remoteport any further.
+		 */
+		lpfc_nlp_put(ndlp);
+	} else {
+		spin_unlock_irq(&vport->phba->hbalock);
+	}
 
  rport_err:
 	return;
@@ -897,88 +899,6 @@ lpfc_nvme_adj_fcp_sgls(struct lpfc_vport *vport,
 	sgl->sge_len = cpu_to_le32(nCmd->rsplen);
 }
 
-#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
-static void
-lpfc_nvme_ktime(struct lpfc_hba *phba,
-		struct lpfc_io_buf *lpfc_ncmd)
-{
-	uint64_t seg1, seg2, seg3, seg4;
-	uint64_t segsum;
-
-	if (!lpfc_ncmd->ts_last_cmd ||
-	    !lpfc_ncmd->ts_cmd_start ||
-	    !lpfc_ncmd->ts_cmd_wqput ||
-	    !lpfc_ncmd->ts_isr_cmpl ||
-	    !lpfc_ncmd->ts_data_nvme)
-		return;
-
-	if (lpfc_ncmd->ts_data_nvme < lpfc_ncmd->ts_cmd_start)
-		return;
-	if (lpfc_ncmd->ts_cmd_start < lpfc_ncmd->ts_last_cmd)
-		return;
-	if (lpfc_ncmd->ts_cmd_wqput < lpfc_ncmd->ts_cmd_start)
-		return;
-	if (lpfc_ncmd->ts_isr_cmpl < lpfc_ncmd->ts_cmd_wqput)
-		return;
-	if (lpfc_ncmd->ts_data_nvme < lpfc_ncmd->ts_isr_cmpl)
-		return;
-	/*
-	 * Segment 1 - Time from Last FCP command cmpl is handed
-	 * off to NVME Layer to start of next command.
-	 * Segment 2 - Time from Driver receives a IO cmd start
-	 * from NVME Layer to WQ put is done on IO cmd.
-	 * Segment 3 - Time from Driver WQ put is done on IO cmd
-	 * to MSI-X ISR for IO cmpl.
-	 * Segment 4 - Time from MSI-X ISR for IO cmpl to when
-	 * cmpl is handled off to the NVME Layer.
-	 */
-	seg1 = lpfc_ncmd->ts_cmd_start - lpfc_ncmd->ts_last_cmd;
-	if (seg1 > 5000000)  /* 5 ms - for sequential IOs only */
-		seg1 = 0;
-
-	/* Calculate times relative to start of IO */
-	seg2 = (lpfc_ncmd->ts_cmd_wqput - lpfc_ncmd->ts_cmd_start);
-	segsum = seg2;
-	seg3 = lpfc_ncmd->ts_isr_cmpl - lpfc_ncmd->ts_cmd_start;
-	if (segsum > seg3)
-		return;
-	seg3 -= segsum;
-	segsum += seg3;
-
-	seg4 = lpfc_ncmd->ts_data_nvme - lpfc_ncmd->ts_cmd_start;
-	if (segsum > seg4)
-		return;
-	seg4 -= segsum;
-
-	phba->ktime_data_samples++;
-	phba->ktime_seg1_total += seg1;
-	if (seg1 < phba->ktime_seg1_min)
-		phba->ktime_seg1_min = seg1;
-	else if (seg1 > phba->ktime_seg1_max)
-		phba->ktime_seg1_max = seg1;
-	phba->ktime_seg2_total += seg2;
-	if (seg2 < phba->ktime_seg2_min)
-		phba->ktime_seg2_min = seg2;
-	else if (seg2 > phba->ktime_seg2_max)
-		phba->ktime_seg2_max = seg2;
-	phba->ktime_seg3_total += seg3;
-	if (seg3 < phba->ktime_seg3_min)
-		phba->ktime_seg3_min = seg3;
-	else if (seg3 > phba->ktime_seg3_max)
-		phba->ktime_seg3_max = seg3;
-	phba->ktime_seg4_total += seg4;
-	if (seg4 < phba->ktime_seg4_min)
-		phba->ktime_seg4_min = seg4;
-	else if (seg4 > phba->ktime_seg4_max)
-		phba->ktime_seg4_max = seg4;
-
-	lpfc_ncmd->ts_last_cmd = 0;
-	lpfc_ncmd->ts_cmd_start = 0;
-	lpfc_ncmd->ts_cmd_wqput  = 0;
-	lpfc_ncmd->ts_isr_cmpl = 0;
-	lpfc_ncmd->ts_data_nvme = 0;
-}
-#endif
 
 /**
  * lpfc_nvme_io_cmd_wqe_cmpl - Complete an NVME-over-FCP IO
@@ -1010,6 +930,9 @@ lpfc_nvme_io_cmd_wqe_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pwqeIn,
 	uint32_t code, status, idx;
 	uint16_t cid, sqhd, data;
 	uint32_t *ptr;
+#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
+	int cpu;
+#endif
 
 	/* Sanity check on return of outstanding command */
 	if (!lpfc_ncmd) {
@@ -1178,23 +1101,19 @@ lpfc_nvme_io_cmd_wqe_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pwqeIn,
 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
 	if (lpfc_ncmd->ts_cmd_start) {
 		lpfc_ncmd->ts_isr_cmpl = pwqeIn->isr_timestamp;
-		lpfc_ncmd->ts_data_nvme = ktime_get_ns();
-		phba->ktime_last_cmd = lpfc_ncmd->ts_data_nvme;
-		lpfc_nvme_ktime(phba, lpfc_ncmd);
+		lpfc_ncmd->ts_data_io = ktime_get_ns();
+		phba->ktime_last_cmd = lpfc_ncmd->ts_data_io;
+		lpfc_io_ktime(phba, lpfc_ncmd);
 	}
-	if (unlikely(phba->cpucheck_on & LPFC_CHECK_NVME_IO)) {
-		uint32_t cpu;
-		idx = lpfc_ncmd->cur_iocbq.hba_wqidx;
+	if (unlikely(phba->hdwqstat_on & LPFC_CHECK_NVME_IO)) {
 		cpu = raw_smp_processor_id();
-		if (cpu < LPFC_CHECK_CPU_CNT) {
-			if (lpfc_ncmd->cpu != cpu)
-				lpfc_printf_vlog(vport,
-						 KERN_INFO, LOG_NVME_IOERR,
-						 "6701 CPU Check cmpl: "
-						 "cpu %d expect %d\n",
-						 cpu, lpfc_ncmd->cpu);
-			phba->sli4_hba.hdwq[idx].cpucheck_cmpl_io[cpu]++;
-		}
+		this_cpu_inc(phba->sli4_hba.c_stat->cmpl_io);
+		if (lpfc_ncmd->cpu != cpu)
+			lpfc_printf_vlog(vport,
+					 KERN_INFO, LOG_NVME_IOERR,
+					 "6701 CPU Check cmpl: "
+					 "cpu %d expect %d\n",
+					 cpu, lpfc_ncmd->cpu);
 	}
 #endif
 
@@ -1743,19 +1662,17 @@ lpfc_nvme_fcp_io_submit(struct nvme_fc_local_port *pnvme_lport,
 	if (lpfc_ncmd->ts_cmd_start)
 		lpfc_ncmd->ts_cmd_wqput = ktime_get_ns();
 
-	if (phba->cpucheck_on & LPFC_CHECK_NVME_IO) {
+	if (phba->hdwqstat_on & LPFC_CHECK_NVME_IO) {
 		cpu = raw_smp_processor_id();
-		if (cpu < LPFC_CHECK_CPU_CNT) {
-			lpfc_ncmd->cpu = cpu;
-			if (idx != cpu)
-				lpfc_printf_vlog(vport,
-						 KERN_INFO, LOG_NVME_IOERR,
-						"6702 CPU Check cmd: "
-						"cpu %d wq %d\n",
-						lpfc_ncmd->cpu,
-						lpfc_queue_info->index);
-			phba->sli4_hba.hdwq[idx].cpucheck_xmt_io[cpu]++;
-		}
+		this_cpu_inc(phba->sli4_hba.c_stat->xmt_io);
+		lpfc_ncmd->cpu = cpu;
+		if (idx != cpu)
+			lpfc_printf_vlog(vport,
+					 KERN_INFO, LOG_NVME_IOERR,
+					"6702 CPU Check cmd: "
+					"cpu %d wq %d\n",
+					lpfc_ncmd->cpu,
+					lpfc_queue_info->index);
 	}
 #endif
 	return 0;
@@ -1985,8 +1902,6 @@ lpfc_nvme_fcp_abort(struct nvme_fc_local_port *pnvme_lport,
 
 /* Declare and initialization an instance of the FC NVME template. */
 static struct nvme_fc_port_template lpfc_nvme_template = {
-	.module	= THIS_MODULE,
-
 	/* initiator-based functions */
 	.localport_delete  = lpfc_nvme_localport_delete,
 	.remoteport_delete = lpfc_nvme_remoteport_delete,
diff --git a/drivers/scsi/lpfc/lpfc_nvmet.c b/drivers/scsi/lpfc/lpfc_nvmet.c
index 9dc9afe..565419b 100644
--- a/drivers/scsi/lpfc/lpfc_nvmet.c
+++ b/drivers/scsi/lpfc/lpfc_nvmet.c
@@ -707,7 +707,7 @@ lpfc_nvmet_xmt_fcp_op_cmp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdwqe,
 	struct lpfc_nvmet_rcv_ctx *ctxp;
 	uint32_t status, result, op, start_clean, logerr;
 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
-	uint32_t id;
+	int id;
 #endif
 
 	ctxp = cmdwqe->context2;
@@ -814,16 +814,14 @@ lpfc_nvmet_xmt_fcp_op_cmp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdwqe,
 		rsp->done(rsp);
 	}
 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
-	if (phba->cpucheck_on & LPFC_CHECK_NVMET_IO) {
+	if (phba->hdwqstat_on & LPFC_CHECK_NVMET_IO) {
 		id = raw_smp_processor_id();
-		if (id < LPFC_CHECK_CPU_CNT) {
-			if (ctxp->cpu != id)
-				lpfc_printf_log(phba, KERN_INFO, LOG_NVME_IOERR,
-						"6704 CPU Check cmdcmpl: "
-						"cpu %d expect %d\n",
-						id, ctxp->cpu);
-			phba->sli4_hba.hdwq[rsp->hwqid].cpucheck_cmpl_io[id]++;
-		}
+		this_cpu_inc(phba->sli4_hba.c_stat->cmpl_io);
+		if (ctxp->cpu != id)
+			lpfc_printf_log(phba, KERN_INFO, LOG_NVME_IOERR,
+					"6704 CPU Check cmdcmpl: "
+					"cpu %d expect %d\n",
+					id, ctxp->cpu);
 	}
 #endif
 }
@@ -931,6 +929,9 @@ lpfc_nvmet_xmt_fcp_op(struct nvmet_fc_target_port *tgtport,
 	struct lpfc_sli_ring *pring;
 	unsigned long iflags;
 	int rc;
+#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
+	int id;
+#endif
 
 	if (phba->pport->load_flag & FC_UNLOADING) {
 		rc = -ENODEV;
@@ -954,16 +955,14 @@ lpfc_nvmet_xmt_fcp_op(struct nvmet_fc_target_port *tgtport,
 	if (!ctxp->hdwq)
 		ctxp->hdwq = &phba->sli4_hba.hdwq[rsp->hwqid];
 
-	if (phba->cpucheck_on & LPFC_CHECK_NVMET_IO) {
-		int id = raw_smp_processor_id();
-		if (id < LPFC_CHECK_CPU_CNT) {
-			if (rsp->hwqid != id)
-				lpfc_printf_log(phba, KERN_INFO, LOG_NVME_IOERR,
-						"6705 CPU Check OP: "
-						"cpu %d expect %d\n",
-						id, rsp->hwqid);
-			phba->sli4_hba.hdwq[rsp->hwqid].cpucheck_xmt_io[id]++;
-		}
+	if (phba->hdwqstat_on & LPFC_CHECK_NVMET_IO) {
+		id = raw_smp_processor_id();
+		this_cpu_inc(phba->sli4_hba.c_stat->xmt_io);
+		if (rsp->hwqid != id)
+			lpfc_printf_log(phba, KERN_INFO, LOG_NVME_IOERR,
+					"6705 CPU Check OP: "
+					"cpu %d expect %d\n",
+					id, rsp->hwqid);
 		ctxp->cpu = id; /* Setup cpu for cmpl check */
 	}
 #endif
@@ -2270,15 +2269,13 @@ lpfc_nvmet_unsol_fcp_buffer(struct lpfc_hba *phba,
 	size = nvmebuf->bytes_recv;
 
 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
-	if (phba->cpucheck_on & LPFC_CHECK_NVMET_RCV) {
-		if (current_cpu < LPFC_CHECK_CPU_CNT) {
-			if (idx != current_cpu)
-				lpfc_printf_log(phba, KERN_INFO, LOG_NVME_IOERR,
-						"6703 CPU Check rcv: "
-						"cpu %d expect %d\n",
-						current_cpu, idx);
-			phba->sli4_hba.hdwq[idx].cpucheck_rcv_io[current_cpu]++;
-		}
+	if (phba->hdwqstat_on & LPFC_CHECK_NVMET_IO) {
+		this_cpu_inc(phba->sli4_hba.c_stat->rcv_io);
+		if (idx != current_cpu)
+			lpfc_printf_log(phba, KERN_INFO, LOG_NVME_IOERR,
+					"6703 CPU Check rcv: "
+					"cpu %d expect %d\n",
+					current_cpu, idx);
 	}
 #endif
 
@@ -2598,7 +2595,7 @@ lpfc_nvmet_prep_fcp_wqe(struct lpfc_hba *phba,
 	union lpfc_wqe128 *wqe;
 	struct ulp_bde64 *bde;
 	dma_addr_t physaddr;
-	int i, cnt;
+	int i, cnt, nsegs;
 	int do_pbde;
 	int xc = 1;
 
@@ -2629,6 +2626,7 @@ lpfc_nvmet_prep_fcp_wqe(struct lpfc_hba *phba,
 				phba->cfg_nvme_seg_cnt);
 		return NULL;
 	}
+	nsegs = rsp->sg_cnt;
 
 	tgtp = (struct lpfc_nvmet_tgtport *)phba->targetport->private;
 	nvmewqe = ctxp->wqeq;
@@ -2868,7 +2866,7 @@ lpfc_nvmet_prep_fcp_wqe(struct lpfc_hba *phba,
 		wqe->fcp_trsp.rsvd_12_15[0] = 0;
 
 		/* Use rspbuf, NOT sg list */
-		rsp->sg_cnt = 0;
+		nsegs = 0;
 		sgl->word2 = 0;
 		atomic_inc(&tgtp->xmt_fcp_rsp);
 		break;
@@ -2885,7 +2883,7 @@ lpfc_nvmet_prep_fcp_wqe(struct lpfc_hba *phba,
 	nvmewqe->drvrTimeout = (phba->fc_ratov * 3) + LPFC_DRVR_TIMEOUT;
 	nvmewqe->context1 = ndlp;
 
-	for_each_sg(rsp->sg, sgel, rsp->sg_cnt, i) {
+	for_each_sg(rsp->sg, sgel, nsegs, i) {
 		physaddr = sg_dma_address(sgel);
 		cnt = sg_dma_len(sgel);
 		sgl->addr_hi = putPaddrHigh(physaddr);
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 2c7e0b2..ad62fb3 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2017-2019 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2020 Broadcom. All Rights Reserved. The term *
  * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.  *
  * Copyright (C) 2004-2016 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
@@ -671,8 +671,10 @@ lpfc_get_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp,
 	lpfc_cmd->prot_data_type = 0;
 #endif
 	tmp = lpfc_get_cmd_rsp_buf_per_hdwq(phba, lpfc_cmd);
-	if (!tmp)
+	if (!tmp) {
+		lpfc_release_io_buf(phba, lpfc_cmd, lpfc_cmd->hdwq);
 		return NULL;
+	}
 
 	lpfc_cmd->fcp_cmnd = tmp->fcp_cmnd;
 	lpfc_cmd->fcp_rsp = tmp->fcp_rsp;
@@ -3803,9 +3805,6 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
 	struct Scsi_Host *shost;
 	int idx;
 	uint32_t logit = LOG_FCP;
-#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
-	int cpu;
-#endif
 
 	/* Guard against abort handler being called at same time */
 	spin_lock(&lpfc_cmd->buf_lock);
@@ -3824,11 +3823,8 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
 		phba->sli4_hba.hdwq[idx].scsi_cstat.io_cmpls++;
 
 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
-	if (unlikely(phba->cpucheck_on & LPFC_CHECK_SCSI_IO)) {
-		cpu = raw_smp_processor_id();
-		if (cpu < LPFC_CHECK_CPU_CNT && phba->sli4_hba.hdwq)
-			phba->sli4_hba.hdwq[idx].cpucheck_cmpl_io[cpu]++;
-	}
+	if (unlikely(phba->hdwqstat_on & LPFC_CHECK_SCSI_IO))
+		this_cpu_inc(phba->sli4_hba.c_stat->cmpl_io);
 #endif
 	shost = cmd->device->host;
 
@@ -4029,6 +4025,14 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
 	lpfc_cmd->pCmd = NULL;
 	spin_unlock(&lpfc_cmd->buf_lock);
 
+#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
+	if (lpfc_cmd->ts_cmd_start) {
+		lpfc_cmd->ts_isr_cmpl = pIocbIn->isr_timestamp;
+		lpfc_cmd->ts_data_io = ktime_get_ns();
+		phba->ktime_last_cmd = lpfc_cmd->ts_data_io;
+		lpfc_io_ktime(phba, lpfc_cmd);
+	}
+#endif
 	/* The sdev is not guaranteed to be valid post scsi_done upcall. */
 	cmd->scsi_done(cmd);
 
@@ -4502,7 +4506,10 @@ lpfc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *cmnd)
 	struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device));
 	int err, idx;
 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
-	int cpu;
+	uint64_t start = 0L;
+
+	if (phba->ktime_on)
+		start = ktime_get_ns();
 #endif
 
 	rdata = lpfc_rport_data_from_scsi_device(cmnd->device);
@@ -4624,17 +4631,20 @@ lpfc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *cmnd)
 	lpfc_scsi_prep_cmnd(vport, lpfc_cmd, ndlp);
 
 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
-	if (unlikely(phba->cpucheck_on & LPFC_CHECK_SCSI_IO)) {
-		cpu = raw_smp_processor_id();
-		if (cpu < LPFC_CHECK_CPU_CNT) {
-			struct lpfc_sli4_hdw_queue *hdwq =
-					&phba->sli4_hba.hdwq[lpfc_cmd->hdwq_no];
-			hdwq->cpucheck_xmt_io[cpu]++;
-		}
-	}
+	if (unlikely(phba->hdwqstat_on & LPFC_CHECK_SCSI_IO))
+		this_cpu_inc(phba->sli4_hba.c_stat->xmt_io);
 #endif
 	err = lpfc_sli_issue_iocb(phba, LPFC_FCP_RING,
 				  &lpfc_cmd->cur_iocbq, SLI_IOCB_RET_IOCB);
+#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
+	if (start) {
+		lpfc_cmd->ts_cmd_start = start;
+		lpfc_cmd->ts_last_cmd = phba->ktime_last_cmd;
+		lpfc_cmd->ts_cmd_wqput = ktime_get_ns();
+	} else {
+		lpfc_cmd->ts_cmd_start = 0;
+	}
+#endif
 	if (err) {
 		lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
 				 "3376 FCP could not issue IOCB err %x"
@@ -6021,31 +6031,6 @@ struct scsi_host_template lpfc_template_nvme = {
 	.track_queue_depth	= 0,
 };
 
-struct scsi_host_template lpfc_template_no_hr = {
-	.module			= THIS_MODULE,
-	.name			= LPFC_DRIVER_NAME,
-	.proc_name		= LPFC_DRIVER_NAME,
-	.info			= lpfc_info,
-	.queuecommand		= lpfc_queuecommand,
-	.eh_timed_out		= fc_eh_timed_out,
-	.eh_abort_handler	= lpfc_abort_handler,
-	.eh_device_reset_handler = lpfc_device_reset_handler,
-	.eh_target_reset_handler = lpfc_target_reset_handler,
-	.eh_bus_reset_handler	= lpfc_bus_reset_handler,
-	.slave_alloc		= lpfc_slave_alloc,
-	.slave_configure	= lpfc_slave_configure,
-	.slave_destroy		= lpfc_slave_destroy,
-	.scan_finished		= lpfc_scan_finished,
-	.this_id		= -1,
-	.sg_tablesize		= LPFC_DEFAULT_SG_SEG_CNT,
-	.cmd_per_lun		= LPFC_CMD_PER_LUN,
-	.shost_attrs		= lpfc_hba_attrs,
-	.max_sectors		= 0xFFFFFFFF,
-	.vendor_id		= LPFC_NL_VENDOR_ID,
-	.change_queue_depth	= scsi_change_queue_depth,
-	.track_queue_depth	= 1,
-};
-
 struct scsi_host_template lpfc_template = {
 	.module			= THIS_MODULE,
 	.name			= LPFC_DRIVER_NAME,
@@ -6071,26 +6056,3 @@ struct scsi_host_template lpfc_template = {
 	.change_queue_depth	= scsi_change_queue_depth,
 	.track_queue_depth	= 1,
 };
-
-struct scsi_host_template lpfc_vport_template = {
-	.module			= THIS_MODULE,
-	.name			= LPFC_DRIVER_NAME,
-	.proc_name		= LPFC_DRIVER_NAME,
-	.info			= lpfc_info,
-	.queuecommand		= lpfc_queuecommand,
-	.eh_timed_out		= fc_eh_timed_out,
-	.eh_abort_handler	= lpfc_abort_handler,
-	.eh_device_reset_handler = lpfc_device_reset_handler,
-	.eh_target_reset_handler = lpfc_target_reset_handler,
-	.slave_alloc		= lpfc_slave_alloc,
-	.slave_configure	= lpfc_slave_configure,
-	.slave_destroy		= lpfc_slave_destroy,
-	.scan_finished		= lpfc_scan_finished,
-	.this_id		= -1,
-	.sg_tablesize		= LPFC_DEFAULT_SG_SEG_CNT,
-	.cmd_per_lun		= LPFC_CMD_PER_LUN,
-	.shost_attrs		= lpfc_vport_attrs,
-	.max_sectors		= 0xFFFF,
-	.change_queue_depth	= scsi_change_queue_depth,
-	.track_queue_depth	= 1,
-};
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 64002b0..b6fb665 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2017-2019 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2020 Broadcom. All Rights Reserved. The term *
  * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.  *
  * Copyright (C) 2004-2016 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
@@ -230,25 +230,16 @@ lpfc_sli4_wq_put(struct lpfc_queue *q, union lpfc_wqe128 *wqe)
  * This routine will update the HBA index of a queue to reflect consumption of
  * Work Queue Entries by the HBA. When the HBA indicates that it has consumed
  * an entry the host calls this function to update the queue's internal
- * pointers. This routine returns the number of entries that were consumed by
- * the HBA.
+ * pointers.
  **/
-static uint32_t
+static void
 lpfc_sli4_wq_release(struct lpfc_queue *q, uint32_t index)
 {
-	uint32_t released = 0;
-
 	/* sanity check on queue memory */
 	if (unlikely(!q))
-		return 0;
+		return;
 
-	if (q->hba_index == index)
-		return 0;
-	do {
-		q->hba_index = ((q->hba_index + 1) % q->entry_count);
-		released++;
-	} while (q->hba_index != index);
-	return released;
+	q->hba_index = index;
 }
 
 /**
@@ -2511,6 +2502,8 @@ lpfc_sli_def_mbox_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 	    !pmb->u.mb.mbxStatus) {
 		rpi = pmb->u.mb.un.varWords[0];
 		vpi = pmb->u.mb.un.varRegLogin.vpi;
+		if (phba->sli_rev == LPFC_SLI_REV4)
+			vpi -= phba->sli4_hba.max_cfg_param.vpi_base;
 		lpfc_unreg_login(phba, vpi, rpi, pmb);
 		pmb->vport = vport;
 		pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
@@ -4044,6 +4037,11 @@ lpfc_sli_flush_io_rings(struct lpfc_hba *phba)
 	struct lpfc_iocbq *piocb, *next_iocb;
 
 	spin_lock_irq(&phba->hbalock);
+	if (phba->hba_flag & HBA_IOQ_FLUSH ||
+	    !phba->sli4_hba.hdwq) {
+		spin_unlock_irq(&phba->hbalock);
+		return;
+	}
 	/* Indicate the I/O queues are flushed */
 	phba->hba_flag |= HBA_IOQ_FLUSH;
 	spin_unlock_irq(&phba->hbalock);
@@ -5034,23 +5032,6 @@ lpfc_sli_config_port(struct lpfc_hba *phba, int sli_mode)
 
 		} else
 			phba->max_vpi = 0;
-		phba->fips_level = 0;
-		phba->fips_spec_rev = 0;
-		if (pmb->u.mb.un.varCfgPort.gdss) {
-			phba->sli3_options |= LPFC_SLI3_DSS_ENABLED;
-			phba->fips_level = pmb->u.mb.un.varCfgPort.fips_level;
-			phba->fips_spec_rev = pmb->u.mb.un.varCfgPort.fips_rev;
-			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
-					"2850 Security Crypto Active. FIPS x%d "
-					"(Spec Rev: x%d)",
-					phba->fips_level, phba->fips_spec_rev);
-		}
-		if (pmb->u.mb.un.varCfgPort.sec_err) {
-			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
-					"2856 Config Port Security Crypto "
-					"Error: x%x ",
-					pmb->u.mb.un.varCfgPort.sec_err);
-		}
 		if (pmb->u.mb.un.varCfgPort.gerbm)
 			phba->sli3_options |= LPFC_SLI3_HBQ_ENABLED;
 		if (pmb->u.mb.un.varCfgPort.gcrp)
@@ -7371,15 +7352,6 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
 			phba->vpd.rev.fcphHigh, phba->vpd.rev.fcphLow,
 			phba->vpd.rev.feaLevelHigh, phba->vpd.rev.feaLevelLow);
 
-	/* Reset the DFT_LUN_Q_DEPTH to (max xri >> 3)  */
-	rc = (phba->sli4_hba.max_cfg_param.max_xri >> 3);
-	if (phba->pport->cfg_lun_queue_depth > rc) {
-		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
-				"3362 LUN queue depth changed from %d to %d\n",
-				phba->pport->cfg_lun_queue_depth, rc);
-		phba->pport->cfg_lun_queue_depth = rc;
-	}
-
 	if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) ==
 	    LPFC_SLI_INTF_IF_TYPE_0) {
 		lpfc_set_features(phba, mboxq, LPFC_SET_UE_RECOVERY);
@@ -9468,6 +9440,7 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
 		if (if_type >= LPFC_SLI_INTF_IF_TYPE_2) {
 			if (pcmd && (*pcmd == ELS_CMD_FLOGI ||
 				*pcmd == ELS_CMD_SCR ||
+				*pcmd == ELS_CMD_RDF ||
 				*pcmd == ELS_CMD_RSCN_XMT ||
 				*pcmd == ELS_CMD_FDISC ||
 				*pcmd == ELS_CMD_LOGO ||
@@ -14450,12 +14423,10 @@ static inline void lpfc_sli4_add_to_poll_list(struct lpfc_queue *eq)
 {
 	struct lpfc_hba *phba = eq->phba;
 
-	if (list_empty(&phba->poll_list)) {
-		timer_setup(&phba->cpuhp_poll_timer, lpfc_sli4_poll_hbtimer, 0);
-		/* kickstart slowpath processing for this eq */
+	/* kickstart slowpath processing if needed */
+	if (list_empty(&phba->poll_list))
 		mod_timer(&phba->cpuhp_poll_timer,
 			  jiffies + msecs_to_jiffies(LPFC_POLL_HB));
-	}
 
 	list_add_rcu(&eq->_poll_list, &phba->poll_list);
 	synchronize_rcu();
@@ -17950,6 +17921,10 @@ lpfc_prep_seq(struct lpfc_vport *vport, struct hbq_dmabuf *seq_dmabuf)
 			list_add_tail(&iocbq->list, &first_iocbq->list);
 		}
 	}
+	/* Free the sequence's header buffer */
+	if (!first_iocbq)
+		lpfc_in_buf_free(vport->phba, &seq_dmabuf->dbuf);
+
 	return first_iocbq;
 }
 
diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h
index 7bcf922..93d976e 100644
--- a/drivers/scsi/lpfc/lpfc_sli.h
+++ b/drivers/scsi/lpfc/lpfc_sli.h
@@ -446,6 +446,6 @@ struct lpfc_io_buf {
 	uint64_t ts_last_cmd;
 	uint64_t ts_cmd_wqput;
 	uint64_t ts_isr_cmpl;
-	uint64_t ts_data_nvme;
+	uint64_t ts_data_io;
 #endif
 };
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index d963ca8..8da7429 100644
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -697,13 +697,6 @@ struct lpfc_sli4_hdw_queue {
 	struct lpfc_lock_stat lock_conflict;
 #endif
 
-#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
-#define LPFC_CHECK_CPU_CNT    128
-	uint32_t cpucheck_rcv_io[LPFC_CHECK_CPU_CNT];
-	uint32_t cpucheck_xmt_io[LPFC_CHECK_CPU_CNT];
-	uint32_t cpucheck_cmpl_io[LPFC_CHECK_CPU_CNT];
-#endif
-
 	/* Per HDWQ pool resources */
 	struct list_head sgl_list;
 	struct list_head cmd_rsp_buf_list;
@@ -740,6 +733,15 @@ struct lpfc_sli4_hdw_queue {
 #define lpfc_qp_spin_lock(lock, qp, lstat) spin_lock(lock)
 #endif
 
+#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
+struct lpfc_hdwq_stat {
+	u32 hdwq_no;
+	u32 rcv_io;
+	u32 xmt_io;
+	u32 cmpl_io;
+};
+#endif
+
 struct lpfc_sli4_hba {
 	void __iomem *conf_regs_memmap_p; /* Kernel memory mapped address for
 					   * config space registers
@@ -921,6 +923,9 @@ struct lpfc_sli4_hba {
 	struct cpumask numa_mask;
 	uint16_t curr_disp_cpu;
 	struct lpfc_eq_intr_info __percpu *eq_info;
+#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
+	struct lpfc_hdwq_stat __percpu *c_stat;
+#endif
 	uint32_t conf_trunk;
 #define lpfc_conf_trunk_port0_WORD	conf_trunk
 #define lpfc_conf_trunk_port0_SHIFT	0
diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
index 9563c49..ca40c47 100644
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2017-2019 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2020 Broadcom. All Rights Reserved. The term *
  * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.     *
  * Copyright (C) 2004-2016 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
@@ -20,7 +20,7 @@
  * included with this package.                                     *
  *******************************************************************/
 
-#define LPFC_DRIVER_VERSION "12.6.0.3"
+#define LPFC_DRIVER_VERSION "12.8.0.0"
 #define LPFC_DRIVER_NAME		"lpfc"
 
 /* Used for SLI 2/3 */
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index fd4b5ac..babe85d7 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -2987,9 +2987,10 @@ megasas_dump_sys_regs(void __iomem *reg_set, char *buf)
 	u32 __iomem *reg = (u32 __iomem *)reg_set;
 
 	for (i = 0; i < sz / sizeof(u32); i++) {
-		bytes_wrote += snprintf(loc + bytes_wrote, PAGE_SIZE,
-					"%08x: %08x\n", (i * 4),
-					readl(&reg[i]));
+		bytes_wrote += scnprintf(loc + bytes_wrote,
+					 PAGE_SIZE - bytes_wrote,
+					 "%08x: %08x\n", (i * 4),
+					 readl(&reg[i]));
 	}
 	return bytes_wrote;
 }
@@ -8224,8 +8225,8 @@ megasas_mgmt_fw_ioctl(struct megasas_instance *instance,
 			"return -EBUSY from %s %d cmd 0x%x opcode 0x%x cmd->cmd_status_drv 0x%x\n",
 			 __func__, __LINE__, cmd->frame->hdr.cmd, opcode,
 			 cmd->cmd_status_drv);
-			error = -EBUSY;
-			goto out;
+		error = -EBUSY;
+		goto out;
 	}
 
 	cmd->sync_cmd = 0;
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index c597d54..04a40af 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -207,7 +207,7 @@ struct fw_event_work {
 	u8			ignore;
 	u16			event;
 	struct kref		refcount;
-	char			event_data[0] __aligned(4);
+	char			event_data[] __aligned(4);
 };
 
 static void fw_event_work_free(struct kref *r)
@@ -9908,8 +9908,8 @@ static void scsih_remove(struct pci_dev *pdev)
 
 	ioc->remove_host = 1;
 
-	mpt3sas_wait_for_commands_to_complete(ioc);
-	_scsih_flush_running_cmds(ioc);
+	if (!pci_device_is_present(pdev))
+		_scsih_flush_running_cmds(ioc);
 
 	_scsih_fw_event_cleanup_queue(ioc);
 
@@ -9992,8 +9992,8 @@ scsih_shutdown(struct pci_dev *pdev)
 
 	ioc->remove_host = 1;
 
-	mpt3sas_wait_for_commands_to_complete(ioc);
-	_scsih_flush_running_cmds(ioc);
+	if (!pci_device_is_present(pdev))
+		_scsih_flush_running_cmds(ioc);
 
 	_scsih_fw_event_cleanup_queue(ioc);
 
diff --git a/drivers/scsi/mvsas/mv_sas.h b/drivers/scsi/mvsas/mv_sas.h
index 519edc7..327fdd5 100644
--- a/drivers/scsi/mvsas/mv_sas.h
+++ b/drivers/scsi/mvsas/mv_sas.h
@@ -394,7 +394,7 @@ struct mvs_info {
 	dma_addr_t bulk_buffer_dma1;
 #define TRASH_BUCKET_SIZE    	0x20000
 	void *dma_pool;
-	struct mvs_slot_info slot_info[0];
+	struct mvs_slot_info slot_info[];
 };
 
 struct mvs_prv_info{
diff --git a/drivers/scsi/mvumi.h b/drivers/scsi/mvumi.h
index ec8cc22..60d5691 100644
--- a/drivers/scsi/mvumi.h
+++ b/drivers/scsi/mvumi.h
@@ -130,7 +130,7 @@ enum {
 struct mvumi_hotplug_event {
 	u16 size;
 	u8 dummy[2];
-	u8 bitmap[0];
+	u8 bitmap[];
 };
 
 struct mvumi_driver_event {
@@ -290,7 +290,7 @@ struct mvumi_rsp_frame {
 
 struct mvumi_ob_data {
 	struct list_head list;
-	unsigned char data[0];
+	unsigned char data[];
 };
 
 struct version_info {
diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c
index 11a2cb8..f88adab 100644
--- a/drivers/scsi/ncr53c8xx.c
+++ b/drivers/scsi/ncr53c8xx.c
@@ -2203,7 +2203,7 @@ static	struct script script0 __initdata = {
 	**	Possible data corruption during Memory Write and Invalidate.
 	**	This work-around resets the addressing logic prior to the 
 	**	start of the first MOVE of a DATA IN phase.
-	**	(See Documentation/scsi/ncr53c8xx.txt for more information)
+	**	(See Documentation/scsi/ncr53c8xx.rst for more information)
 	*/
 	SCR_JUMPR ^ IFFALSE (IF (SCR_DATA_IN)),
 		20,
diff --git a/drivers/scsi/pcmcia/Kconfig b/drivers/scsi/pcmcia/Kconfig
index dc9b74c..9696b6b 100644
--- a/drivers/scsi/pcmcia/Kconfig
+++ b/drivers/scsi/pcmcia/Kconfig
@@ -36,7 +36,7 @@
 	help
 	  If you intend to attach this type of PCMCIA SCSI host adapter to
 	  your computer, say Y here and read
-	  <file:Documentation/scsi/NinjaSCSI.txt>.
+	  <file:Documentation/scsi/NinjaSCSI.rst>.
 
 	  Supported cards:
 
diff --git a/drivers/scsi/pm8001/pm8001_ctl.c b/drivers/scsi/pm8001/pm8001_ctl.c
index 7c6be2e..3c9f427 100644
--- a/drivers/scsi/pm8001/pm8001_ctl.c
+++ b/drivers/scsi/pm8001/pm8001_ctl.c
@@ -463,7 +463,7 @@ static ssize_t pm8001_ctl_bios_version_show(struct device *cdev,
 	pm8001_ha->nvmd_completion = &completion;
 	payload.minor_function = 7;
 	payload.offset = 0;
-	payload.length = 4096;
+	payload.rd_length = 4096;
 	payload.func_specific = kzalloc(4096, GFP_KERNEL);
 	if (!payload.func_specific)
 		return -ENOMEM;
@@ -554,6 +554,49 @@ static ssize_t pm8001_ctl_fatal_log_show(struct device *cdev,
 
 static DEVICE_ATTR(fatal_log, S_IRUGO, pm8001_ctl_fatal_log_show, NULL);
 
+/**
+ ** non_fatal_log_show - non fatal error logging
+ ** @cdev:pointer to embedded class device
+ ** @buf: the buffer returned
+ **
+ ** A sysfs 'read-only' shost attribute.
+ **/
+static ssize_t non_fatal_log_show(struct device *cdev,
+	struct device_attribute *attr, char *buf)
+{
+	u32 count;
+
+	count = pm80xx_get_non_fatal_dump(cdev, attr, buf);
+	return count;
+}
+static DEVICE_ATTR_RO(non_fatal_log);
+
+static ssize_t non_fatal_count_show(struct device *cdev,
+		struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+	struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+
+	return snprintf(buf, PAGE_SIZE, "%08x",
+			pm8001_ha->non_fatal_count);
+}
+
+static ssize_t non_fatal_count_store(struct device *cdev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+	struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+	int val = 0;
+
+	if (kstrtoint(buf, 16, &val) != 0)
+		return -EINVAL;
+
+	pm8001_ha->non_fatal_count = val;
+	return strlen(buf);
+}
+static DEVICE_ATTR_RW(non_fatal_count);
 
 /**
  ** pm8001_ctl_gsm_log_show - gsm dump collection
@@ -631,7 +674,7 @@ static int pm8001_set_nvmd(struct pm8001_hba_info *pm8001_ha)
 	payload = (struct pm8001_ioctl_payload *)ioctlbuffer;
 	memcpy((u8 *)&payload->func_specific, (u8 *)pm8001_ha->fw_image->data,
 				pm8001_ha->fw_image->size);
-	payload->length = pm8001_ha->fw_image->size;
+	payload->wr_length = pm8001_ha->fw_image->size;
 	payload->id = 0;
 	payload->minor_function = 0x1;
 	pm8001_ha->nvmd_completion = &completion;
@@ -677,7 +720,7 @@ static int pm8001_update_flash(struct pm8001_hba_info *pm8001_ha)
 					IOCTL_BUF_SIZE);
 		for (loopNumber = 0; loopNumber < loopcount; loopNumber++) {
 			payload = (struct pm8001_ioctl_payload *)ioctlbuffer;
-			payload->length = 1024*16;
+			payload->wr_length = 1024*16;
 			payload->id = 0;
 			fwControl =
 			      (struct fw_control_info *)&payload->func_specific;
@@ -829,6 +872,8 @@ struct device_attribute *pm8001_host_attrs[] = {
 	&dev_attr_aap_log,
 	&dev_attr_iop_log,
 	&dev_attr_fatal_log,
+	&dev_attr_non_fatal_log,
+	&dev_attr_non_fatal_count,
 	&dev_attr_gsm_log,
 	&dev_attr_max_out_io,
 	&dev_attr_max_devices,
diff --git a/drivers/scsi/pm8001/pm8001_defs.h b/drivers/scsi/pm8001/pm8001_defs.h
index 48e0624..1c7f15f 100644
--- a/drivers/scsi/pm8001/pm8001_defs.h
+++ b/drivers/scsi/pm8001/pm8001_defs.h
@@ -75,7 +75,7 @@ enum port_type {
 };
 
 /* driver compile-time configuration */
-#define	PM8001_MAX_CCB		 512	/* max ccbs supported */
+#define	PM8001_MAX_CCB		 256	/* max ccbs supported */
 #define PM8001_MPI_QUEUE         1024   /* maximum mpi queue entries */
 #define	PM8001_MAX_INB_NUM	 1
 #define	PM8001_MAX_OUTB_NUM	 1
@@ -99,7 +99,8 @@ enum port_type {
 #define OB			(CI + PM8001_MAX_SPCV_INB_NUM)
 #define PI			(OB + PM8001_MAX_SPCV_OUTB_NUM)
 #define USI_MAX_MEMCNT		(PI + PM8001_MAX_SPCV_OUTB_NUM)
-#define PM8001_MAX_DMA_SG	SG_ALL
+#define	CONFIG_SCSI_PM8001_MAX_DMA_SG	528
+#define PM8001_MAX_DMA_SG	CONFIG_SCSI_PM8001_MAX_DMA_SG
 enum memory_region_num {
 	AAP1 = 0x0, /* application acceleration processor */
 	IOP,	    /* IO processor */
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 2328ff1..fb9848e 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -4793,7 +4793,7 @@ int pm8001_chip_get_nvmd_req(struct pm8001_hba_info *pm8001_ha,
 	if (!fw_control_context)
 		return -ENOMEM;
 	fw_control_context->usrAddr = (u8 *)ioctl_payload->func_specific;
-	fw_control_context->len = ioctl_payload->length;
+	fw_control_context->len = ioctl_payload->rd_length;
 	circularQ = &pm8001_ha->inbnd_q_tbl[0];
 	memset(&nvmd_req, 0, sizeof(nvmd_req));
 	rc = pm8001_tag_alloc(pm8001_ha, &tag);
@@ -4814,7 +4814,7 @@ int pm8001_chip_get_nvmd_req(struct pm8001_hba_info *pm8001_ha,
 
 		nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | twi_addr << 16 |
 			twi_page_size << 8 | TWI_DEVICE);
-		nvmd_req.resp_len = cpu_to_le32(ioctl_payload->length);
+		nvmd_req.resp_len = cpu_to_le32(ioctl_payload->rd_length);
 		nvmd_req.resp_addr_hi =
 		    cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
 		nvmd_req.resp_addr_lo =
@@ -4823,7 +4823,7 @@ int pm8001_chip_get_nvmd_req(struct pm8001_hba_info *pm8001_ha,
 	}
 	case C_SEEPROM: {
 		nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | C_SEEPROM);
-		nvmd_req.resp_len = cpu_to_le32(ioctl_payload->length);
+		nvmd_req.resp_len = cpu_to_le32(ioctl_payload->rd_length);
 		nvmd_req.resp_addr_hi =
 		    cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
 		nvmd_req.resp_addr_lo =
@@ -4832,7 +4832,7 @@ int pm8001_chip_get_nvmd_req(struct pm8001_hba_info *pm8001_ha,
 	}
 	case VPD_FLASH: {
 		nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | VPD_FLASH);
-		nvmd_req.resp_len = cpu_to_le32(ioctl_payload->length);
+		nvmd_req.resp_len = cpu_to_le32(ioctl_payload->rd_length);
 		nvmd_req.resp_addr_hi =
 		    cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
 		nvmd_req.resp_addr_lo =
@@ -4841,7 +4841,7 @@ int pm8001_chip_get_nvmd_req(struct pm8001_hba_info *pm8001_ha,
 	}
 	case EXPAN_ROM: {
 		nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | EXPAN_ROM);
-		nvmd_req.resp_len = cpu_to_le32(ioctl_payload->length);
+		nvmd_req.resp_len = cpu_to_le32(ioctl_payload->rd_length);
 		nvmd_req.resp_addr_hi =
 		    cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
 		nvmd_req.resp_addr_lo =
@@ -4850,7 +4850,7 @@ int pm8001_chip_get_nvmd_req(struct pm8001_hba_info *pm8001_ha,
 	}
 	case IOP_RDUMP: {
 		nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | IOP_RDUMP);
-		nvmd_req.resp_len = cpu_to_le32(ioctl_payload->length);
+		nvmd_req.resp_len = cpu_to_le32(ioctl_payload->rd_length);
 		nvmd_req.vpd_offset = cpu_to_le32(ioctl_payload->offset);
 		nvmd_req.resp_addr_hi =
 		cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
@@ -4890,7 +4890,7 @@ int pm8001_chip_set_nvmd_req(struct pm8001_hba_info *pm8001_ha,
 	circularQ = &pm8001_ha->inbnd_q_tbl[0];
 	memcpy(pm8001_ha->memoryMap.region[NVMD].virt_ptr,
 		&ioctl_payload->func_specific,
-		ioctl_payload->length);
+		ioctl_payload->wr_length);
 	memset(&nvmd_req, 0, sizeof(nvmd_req));
 	rc = pm8001_tag_alloc(pm8001_ha, &tag);
 	if (rc) {
@@ -4909,7 +4909,7 @@ int pm8001_chip_set_nvmd_req(struct pm8001_hba_info *pm8001_ha,
 		nvmd_req.reserved[0] = cpu_to_le32(0xFEDCBA98);
 		nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | twi_addr << 16 |
 			twi_page_size << 8 | TWI_DEVICE);
-		nvmd_req.resp_len = cpu_to_le32(ioctl_payload->length);
+		nvmd_req.resp_len = cpu_to_le32(ioctl_payload->wr_length);
 		nvmd_req.resp_addr_hi =
 		    cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
 		nvmd_req.resp_addr_lo =
@@ -4918,7 +4918,7 @@ int pm8001_chip_set_nvmd_req(struct pm8001_hba_info *pm8001_ha,
 	}
 	case C_SEEPROM:
 		nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | C_SEEPROM);
-		nvmd_req.resp_len = cpu_to_le32(ioctl_payload->length);
+		nvmd_req.resp_len = cpu_to_le32(ioctl_payload->wr_length);
 		nvmd_req.reserved[0] = cpu_to_le32(0xFEDCBA98);
 		nvmd_req.resp_addr_hi =
 		    cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
@@ -4927,7 +4927,7 @@ int pm8001_chip_set_nvmd_req(struct pm8001_hba_info *pm8001_ha,
 		break;
 	case VPD_FLASH:
 		nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | VPD_FLASH);
-		nvmd_req.resp_len = cpu_to_le32(ioctl_payload->length);
+		nvmd_req.resp_len = cpu_to_le32(ioctl_payload->wr_length);
 		nvmd_req.reserved[0] = cpu_to_le32(0xFEDCBA98);
 		nvmd_req.resp_addr_hi =
 		    cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
@@ -4936,7 +4936,7 @@ int pm8001_chip_set_nvmd_req(struct pm8001_hba_info *pm8001_ha,
 		break;
 	case EXPAN_ROM:
 		nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | EXPAN_ROM);
-		nvmd_req.resp_len = cpu_to_le32(ioctl_payload->length);
+		nvmd_req.resp_len = cpu_to_le32(ioctl_payload->wr_length);
 		nvmd_req.reserved[0] = cpu_to_le32(0xFEDCBA98);
 		nvmd_req.resp_addr_hi =
 		    cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index 3c6076e..a8f5344f 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -95,7 +95,7 @@ static struct scsi_host_template pm8001_sht = {
 	.bios_param		= sas_bios_param,
 	.can_queue		= 1,
 	.this_id		= -1,
-	.sg_tablesize		= SG_ALL,
+	.sg_tablesize		= PM8001_MAX_DMA_SG,
 	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
 	.eh_device_reset_handler = sas_eh_device_reset_handler,
 	.eh_target_reset_handler = sas_eh_target_reset_handler,
@@ -251,6 +251,9 @@ static irqreturn_t pm8001_interrupt_handler_intx(int irq, void *dev_id)
 	return ret;
 }
 
+static u32 pm8001_setup_irq(struct pm8001_hba_info *pm8001_ha);
+static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha);
+
 /**
  * pm8001_alloc - initiate our hba structure and 6 DMAs area.
  * @pm8001_ha:our hba structure.
@@ -483,6 +486,7 @@ static struct pm8001_hba_info *pm8001_pci_alloc(struct pci_dev *pdev,
 	pm8001_ha->shost = shost;
 	pm8001_ha->id = pm8001_id++;
 	pm8001_ha->logging_level = logging_level;
+	pm8001_ha->non_fatal_count = 0;
 	if (link_rate >= 1 && link_rate <= 15)
 		pm8001_ha->link_rate = (link_rate << 8);
 	else {
@@ -635,22 +639,22 @@ static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha)
 	if (pm8001_ha->chip_id == chip_8001) {
 		if (deviceid == 0x8081 || deviceid == 0x0042) {
 			payload.minor_function = 4;
-			payload.length = 4096;
+			payload.rd_length = 4096;
 		} else {
 			payload.minor_function = 0;
-			payload.length = 128;
+			payload.rd_length = 128;
 		}
 	} else if ((pm8001_ha->chip_id == chip_8070 ||
 			pm8001_ha->chip_id == chip_8072) &&
 			pm8001_ha->pdev->subsystem_vendor == PCI_VENDOR_ID_ATTO) {
 		payload.minor_function = 4;
-		payload.length = 4096;
+		payload.rd_length = 4096;
 	} else {
 		payload.minor_function = 1;
-		payload.length = 4096;
+		payload.rd_length = 4096;
 	}
 	payload.offset = 0;
-	payload.func_specific = kzalloc(payload.length, GFP_KERNEL);
+	payload.func_specific = kzalloc(payload.rd_length, GFP_KERNEL);
 	if (!payload.func_specific) {
 		PM8001_INIT_DBG(pm8001_ha, pm8001_printk("mem alloc fail\n"));
 		return;
@@ -720,7 +724,7 @@ static int pm8001_get_phy_settings_info(struct pm8001_hba_info *pm8001_ha)
 	/* SAS ADDRESS read from flash / EEPROM */
 	payload.minor_function = 6;
 	payload.offset = 0;
-	payload.length = 4096;
+	payload.rd_length = 4096;
 	payload.func_specific = kzalloc(4096, GFP_KERNEL);
 	if (!payload.func_specific)
 		return -ENOMEM;
@@ -893,9 +897,7 @@ static int pm8001_configure_phy_settings(struct pm8001_hba_info *pm8001_ha)
  */
 static u32 pm8001_setup_msix(struct pm8001_hba_info *pm8001_ha)
 {
-	u32 i = 0, j = 0;
 	u32 number_of_intr;
-	int flag = 0;
 	int rc;
 
 	/* SPCv controllers supports 64 msi-x */
@@ -903,11 +905,11 @@ static u32 pm8001_setup_msix(struct pm8001_hba_info *pm8001_ha)
 		number_of_intr = 1;
 	} else {
 		number_of_intr = PM8001_MAX_MSIX_VEC;
-		flag &= ~IRQF_SHARED;
 	}
 
 	rc = pci_alloc_irq_vectors(pm8001_ha->pdev, number_of_intr,
 			number_of_intr, PCI_IRQ_MSIX);
+	number_of_intr = rc;
 	if (rc < 0)
 		return rc;
 	pm8001_ha->number_of_intr = number_of_intr;
@@ -915,8 +917,22 @@ static u32 pm8001_setup_msix(struct pm8001_hba_info *pm8001_ha)
 	PM8001_INIT_DBG(pm8001_ha, pm8001_printk(
 		"pci_alloc_irq_vectors request ret:%d no of intr %d\n",
 				rc, pm8001_ha->number_of_intr));
+	return 0;
+}
 
-	for (i = 0; i < number_of_intr; i++) {
+static u32 pm8001_request_msix(struct pm8001_hba_info *pm8001_ha)
+{
+	u32 i = 0, j = 0;
+	int flag = 0, rc = 0;
+
+	if (pm8001_ha->chip_id != chip_8001)
+		flag &= ~IRQF_SHARED;
+
+	PM8001_INIT_DBG(pm8001_ha,
+		pm8001_printk("pci_enable_msix request number of intr %d\n",
+		pm8001_ha->number_of_intr));
+
+	for (i = 0; i < pm8001_ha->number_of_intr; i++) {
 		snprintf(pm8001_ha->intr_drvname[i],
 			sizeof(pm8001_ha->intr_drvname[0]),
 			"%s-%d", pm8001_ha->name, i);
@@ -941,6 +957,21 @@ static u32 pm8001_setup_msix(struct pm8001_hba_info *pm8001_ha)
 }
 #endif
 
+static u32 pm8001_setup_irq(struct pm8001_hba_info *pm8001_ha)
+{
+	struct pci_dev *pdev;
+
+	pdev = pm8001_ha->pdev;
+
+#ifdef PM8001_USE_MSIX
+	if (pci_find_capability(pdev, PCI_CAP_ID_MSIX))
+		return pm8001_setup_msix(pm8001_ha);
+	PM8001_INIT_DBG(pm8001_ha,
+		pm8001_printk("MSIX not supported!!!\n"));
+#endif
+	return 0;
+}
+
 /**
  * pm8001_request_irq - register interrupt
  * @chip_info: our ha struct.
@@ -954,7 +985,7 @@ static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha)
 
 #ifdef PM8001_USE_MSIX
 	if (pdev->msix_cap && pci_msi_enabled())
-		return pm8001_setup_msix(pm8001_ha);
+		return pm8001_request_msix(pm8001_ha);
 	else {
 		PM8001_INIT_DBG(pm8001_ha,
 			pm8001_printk("MSIX not supported!!!\n"));
@@ -989,6 +1020,7 @@ static int pm8001_pci_probe(struct pci_dev *pdev,
 	struct pm8001_hba_info *pm8001_ha;
 	struct Scsi_Host *shost = NULL;
 	const struct pm8001_chip_info *chip;
+	struct sas_ha_struct *sha;
 
 	dev_printk(KERN_INFO, &pdev->dev,
 		"pm80xx: driver version %s\n", DRV_VERSION);
@@ -1017,12 +1049,12 @@ static int pm8001_pci_probe(struct pci_dev *pdev,
 		goto err_out_regions;
 	}
 	chip = &pm8001_chips[ent->driver_data];
-	SHOST_TO_SAS_HA(shost) =
-		kzalloc(sizeof(struct sas_ha_struct), GFP_KERNEL);
-	if (!SHOST_TO_SAS_HA(shost)) {
+	sha = kzalloc(sizeof(struct sas_ha_struct), GFP_KERNEL);
+	if (!sha) {
 		rc = -ENOMEM;
 		goto err_out_free_host;
 	}
+	SHOST_TO_SAS_HA(shost) = sha;
 
 	rc = pm8001_prep_sas_ha_init(shost, chip);
 	if (rc) {
@@ -1036,7 +1068,14 @@ static int pm8001_pci_probe(struct pci_dev *pdev,
 		rc = -ENOMEM;
 		goto err_out_free;
 	}
-	list_add_tail(&pm8001_ha->list, &hba_list);
+	/* Setup Interrupt */
+	rc = pm8001_setup_irq(pm8001_ha);
+	if (rc)	{
+		PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
+			"pm8001_setup_irq failed [ret: %d]\n", rc));
+		goto err_out_shost;
+	}
+
 	PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
 	rc = PM8001_CHIP_DISP->chip_init(pm8001_ha);
 	if (rc) {
@@ -1048,6 +1087,7 @@ static int pm8001_pci_probe(struct pci_dev *pdev,
 	rc = scsi_add_host(shost, &pdev->dev);
 	if (rc)
 		goto err_out_ha_free;
+	/* Request Interrupt */
 	rc = pm8001_request_irq(pm8001_ha);
 	if (rc)	{
 		PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
@@ -1070,8 +1110,12 @@ static int pm8001_pci_probe(struct pci_dev *pdev,
 
 	pm8001_post_sas_ha_init(shost, chip);
 	rc = sas_register_ha(SHOST_TO_SAS_HA(shost));
-	if (rc)
+	if (rc) {
+		PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
+			"sas_register_ha failed [ret: %d]\n", rc));
 		goto err_out_shost;
+	}
+	list_add_tail(&pm8001_ha->list, &hba_list);
 	scsi_scan_host(pm8001_ha->shost);
 	pm8001_ha->flags = PM8001F_RUN_TIME;
 	return 0;
@@ -1081,7 +1125,7 @@ static int pm8001_pci_probe(struct pci_dev *pdev,
 err_out_ha_free:
 	pm8001_free(pm8001_ha);
 err_out_free:
-	kfree(SHOST_TO_SAS_HA(shost));
+	kfree(sha);
 err_out_free_host:
 	scsi_host_put(shost);
 err_out_regions:
diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h
index 93438c8..ae7ba9b 100644
--- a/drivers/scsi/pm8001/pm8001_sas.h
+++ b/drivers/scsi/pm8001/pm8001_sas.h
@@ -137,10 +137,11 @@ struct pm8001_ioctl_payload {
 	u32	signature;
 	u16	major_function;
 	u16	minor_function;
-	u16	length;
 	u16	status;
 	u16	offset;
 	u16	id;
+	u32	wr_length;
+	u32	rd_length;
 	u8	*func_specific;
 };
 
@@ -558,6 +559,8 @@ struct pm8001_hba_info {
 	const struct firmware 	*fw_image;
 	struct isr_param irq_vector[PM8001_MAX_MSIX_VEC];
 	u32			reset_in_progress;
+	u32			non_fatal_count;
+	u32			non_fatal_read_length;
 };
 
 struct pm8001_work {
@@ -741,6 +744,8 @@ void pm8001_set_phy_profile_single(struct pm8001_hba_info *pm8001_ha,
 int pm80xx_bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue);
 ssize_t pm80xx_get_fatal_dump(struct device *cdev,
 		struct device_attribute *attr, char *buf);
+ssize_t pm80xx_get_non_fatal_dump(struct device *cdev,
+		struct device_attribute *attr, char *buf);
 ssize_t pm8001_get_gsm_dump(struct device *cdev, u32, char *buf);
 /* ctl shared API */
 extern struct device_attribute *pm8001_host_attrs[];
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index d1d95f1..4d205eb 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -393,6 +393,136 @@ ssize_t pm80xx_get_fatal_dump(struct device *cdev,
 		(char *)buf;
 }
 
+/* pm80xx_get_non_fatal_dump - dump the nonfatal data from the dma
+ * location by the firmware.
+ */
+ssize_t pm80xx_get_non_fatal_dump(struct device *cdev,
+	struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+	struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+	void __iomem *nonfatal_table_address = pm8001_ha->fatal_tbl_addr;
+	u32 accum_len = 0;
+	u32 total_len = 0;
+	u32 reg_val = 0;
+	u32 *temp = NULL;
+	u32 index = 0;
+	u32 output_length;
+	unsigned long start = 0;
+	char *buf_copy = buf;
+
+	temp = (u32 *)pm8001_ha->memoryMap.region[FORENSIC_MEM].virt_ptr;
+	if (++pm8001_ha->non_fatal_count == 1) {
+		if (pm8001_ha->chip_id == chip_8001) {
+			snprintf(pm8001_ha->forensic_info.data_buf.direct_data,
+				PAGE_SIZE, "Not supported for SPC controller");
+			return 0;
+		}
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("forensic_info TYPE_NON_FATAL...\n"));
+		/*
+		 * Step 1: Write the host buffer parameters in the MPI Fatal and
+		 * Non-Fatal Error Dump Capture Table.This is the buffer
+		 * where debug data will be DMAed to.
+		 */
+		pm8001_mw32(nonfatal_table_address,
+		MPI_FATAL_EDUMP_TABLE_LO_OFFSET,
+		pm8001_ha->memoryMap.region[FORENSIC_MEM].phys_addr_lo);
+
+		pm8001_mw32(nonfatal_table_address,
+		MPI_FATAL_EDUMP_TABLE_HI_OFFSET,
+		pm8001_ha->memoryMap.region[FORENSIC_MEM].phys_addr_hi);
+
+		pm8001_mw32(nonfatal_table_address,
+		MPI_FATAL_EDUMP_TABLE_LENGTH, SYSFS_OFFSET);
+
+		/* Optionally, set the DUMPCTRL bit to 1 if the host
+		 * keeps sending active I/Os while capturing the non-fatal
+		 * debug data. Otherwise, leave this bit set to zero
+		 */
+		pm8001_mw32(nonfatal_table_address,
+		MPI_FATAL_EDUMP_TABLE_HANDSHAKE, MPI_FATAL_EDUMP_HANDSHAKE_RDY);
+
+		/*
+		 * Step 2: Clear Accumulative Length of Debug Data Transferred
+		 * [ACCDDLEN] field in the MPI Fatal and Non-Fatal Error Dump
+		 * Capture Table to zero.
+		 */
+		pm8001_mw32(nonfatal_table_address,
+				MPI_FATAL_EDUMP_TABLE_ACCUM_LEN, 0);
+
+		/* initiallize previous accumulated length to 0 */
+		pm8001_ha->forensic_preserved_accumulated_transfer = 0;
+		pm8001_ha->non_fatal_read_length = 0;
+	}
+
+	total_len = pm8001_mr32(nonfatal_table_address,
+			MPI_FATAL_EDUMP_TABLE_TOTAL_LEN);
+	/*
+	 * Step 3:Clear Fatal/Non-Fatal Debug Data Transfer Status [FDDTSTAT]
+	 * field and then request that the SPCv controller transfer the debug
+	 * data by setting bit 7 of the Inbound Doorbell Set Register.
+	 */
+	pm8001_mw32(nonfatal_table_address, MPI_FATAL_EDUMP_TABLE_STATUS, 0);
+	pm8001_cw32(pm8001_ha, 0, MSGU_IBDB_SET,
+			SPCv_MSGU_CFG_TABLE_NONFATAL_DUMP);
+
+	/*
+	 * Step 4.1: Read back the Inbound Doorbell Set Register (by polling for
+	 * 2 seconds) until register bit 7 is cleared.
+	 * This step only indicates the request is accepted by the controller.
+	 */
+	start = jiffies + (2 * HZ); /* 2 sec */
+	do {
+		reg_val = pm8001_cr32(pm8001_ha, 0, MSGU_IBDB_SET) &
+			SPCv_MSGU_CFG_TABLE_NONFATAL_DUMP;
+	} while ((reg_val != 0) && time_before(jiffies, start));
+
+	/* Step 4.2: To check the completion of the transfer, poll the Fatal/Non
+	 * Fatal Debug Data Transfer Status [FDDTSTAT] field for 2 seconds in
+	 * the MPI Fatal and Non-Fatal Error Dump Capture Table.
+	 */
+	start = jiffies + (2 * HZ); /* 2 sec */
+	do {
+		reg_val = pm8001_mr32(nonfatal_table_address,
+				MPI_FATAL_EDUMP_TABLE_STATUS);
+	} while ((!reg_val) && time_before(jiffies, start));
+
+	if ((reg_val == 0x00) ||
+		(reg_val == MPI_FATAL_EDUMP_TABLE_STAT_DMA_FAILED) ||
+		(reg_val > MPI_FATAL_EDUMP_TABLE_STAT_NF_SUCCESS_DONE)) {
+		pm8001_ha->non_fatal_read_length = 0;
+		buf_copy += snprintf(buf_copy, PAGE_SIZE, "%08x ", 0xFFFFFFFF);
+		pm8001_ha->non_fatal_count = 0;
+		return (buf_copy - buf);
+	} else if (reg_val ==
+			MPI_FATAL_EDUMP_TABLE_STAT_NF_SUCCESS_MORE_DATA) {
+		buf_copy += snprintf(buf_copy, PAGE_SIZE, "%08x ", 2);
+	} else if ((reg_val == MPI_FATAL_EDUMP_TABLE_STAT_NF_SUCCESS_DONE) ||
+		(pm8001_ha->non_fatal_read_length >= total_len)) {
+		pm8001_ha->non_fatal_read_length = 0;
+		buf_copy += snprintf(buf_copy, PAGE_SIZE, "%08x ", 4);
+		pm8001_ha->non_fatal_count = 0;
+	}
+	accum_len = pm8001_mr32(nonfatal_table_address,
+			MPI_FATAL_EDUMP_TABLE_ACCUM_LEN);
+	output_length = accum_len -
+		pm8001_ha->forensic_preserved_accumulated_transfer;
+
+	for (index = 0; index < output_length/4; index++)
+		buf_copy += snprintf(buf_copy, PAGE_SIZE,
+				"%08x ", *(temp+index));
+
+	pm8001_ha->non_fatal_read_length += output_length;
+
+	/* store current accumulated length to use in next iteration as
+	 * the previous accumulated length
+	 */
+	pm8001_ha->forensic_preserved_accumulated_transfer = accum_len;
+	return (buf_copy - buf);
+}
+
 /**
  * read_main_config_table - read the configure table and save it.
  * @pm8001_ha: our hba card information
@@ -1438,11 +1568,18 @@ pm80xx_chip_soft_rst(struct pm8001_hba_info *pm8001_ha)
 	if (!pm8001_ha->controller_fatal_error) {
 		/* Check if MPI is in ready state to reset */
 		if (mpi_uninit_check(pm8001_ha) != 0) {
-			regval = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
+			u32 r0 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_0);
+			u32 r1 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
+			u32 r2 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2);
+			u32 r3 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_3);
 			PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
-				"MPI state is not ready scratch1 :0x%x\n",
-				regval));
-			return -1;
+				"MPI state is not ready scratch: %x:%x:%x:%x\n",
+				r0, r1, r2, r3));
+			/* if things aren't ready but the bootloader is ok then
+			 * try the reset anyway.
+			 */
+			if (r1 & SCRATCH_PAD1_BOOTSTATE_MASK)
+				return -1;
 		}
 	}
 	/* checked for reset register normal state; 0x0 */
@@ -3708,28 +3845,32 @@ static int mpi_flash_op_ext_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
 static int mpi_set_phy_profile_resp(struct pm8001_hba_info *pm8001_ha,
 			void *piomb)
 {
+	u32 tag;
 	u8 page_code;
+	int rc = 0;
 	struct set_phy_profile_resp *pPayload =
 		(struct set_phy_profile_resp *)(piomb + 4);
 	u32 ppc_phyid = le32_to_cpu(pPayload->ppc_phyid);
 	u32 status = le32_to_cpu(pPayload->status);
 
+	tag = le32_to_cpu(pPayload->tag);
 	page_code = (u8)((ppc_phyid & 0xFF00) >> 8);
 	if (status) {
 		/* status is FAILED */
 		PM8001_FAIL_DBG(pm8001_ha,
 			pm8001_printk("PhyProfile command failed  with status "
 			"0x%08X \n", status));
-		return -1;
+		rc = -1;
 	} else {
 		if (page_code != SAS_PHY_ANALOG_SETTINGS_PAGE) {
 			PM8001_FAIL_DBG(pm8001_ha,
 				pm8001_printk("Invalid page code 0x%X\n",
 					page_code));
-			return -1;
+			rc = -1;
 		}
 	}
-	return 0;
+	pm8001_tag_free(pm8001_ha, tag);
+	return rc;
 }
 
 /**
diff --git a/drivers/scsi/pmcraid.h b/drivers/scsi/pmcraid.h
index a4f7eb8..15c9621 100644
--- a/drivers/scsi/pmcraid.h
+++ b/drivers/scsi/pmcraid.h
@@ -623,7 +623,7 @@ struct pmcraid_aen_msg {
 	u32 hostno;
 	u32 length;
 	u8  reserved[8];
-	u8  data[0];
+	u8  data[];
 };
 
 /* Controller state event message type */
diff --git a/drivers/scsi/qedi/qedi.h b/drivers/scsi/qedi/qedi.h
index 9513fd3..9498279 100644
--- a/drivers/scsi/qedi/qedi.h
+++ b/drivers/scsi/qedi/qedi.h
@@ -36,6 +36,7 @@ struct qedi_endpoint;
  */
 #define QEDI_MODE_NORMAL	0
 #define QEDI_MODE_RECOVERY	1
+#define QEDI_MODE_SHUTDOWN	2
 
 #define ISCSI_WQE_SET_PTU_INVALIDATE	1
 #define QEDI_MAX_ISCSI_TASK		4096
@@ -278,6 +279,7 @@ struct qedi_ctx {
 #define QEDI_IOTHREAD_WAKE	2
 #define QEDI_IN_RECOVERY	5
 #define QEDI_IN_OFFLINE		6
+#define QEDI_IN_SHUTDOWN	7
 
 	u8 mac[ETH_ALEN];
 	u32 src_ip[4];
@@ -331,6 +333,7 @@ struct qedi_ctx {
 	u16 ll2_mtu;
 
 	struct workqueue_struct *dpc_wq;
+	struct delayed_work recovery_work;
 
 	spinlock_t task_idx_lock;	/* To protect gbl context */
 	s32 last_tidx_alloc;
diff --git a/drivers/scsi/qedi/qedi_gbl.h b/drivers/scsi/qedi/qedi_gbl.h
index 8ba7c77..116645c 100644
--- a/drivers/scsi/qedi/qedi_gbl.h
+++ b/drivers/scsi/qedi/qedi_gbl.h
@@ -73,5 +73,6 @@ void qedi_remove_sysfs_ctx_attr(struct qedi_ctx *qedi);
 void qedi_clearsq(struct qedi_ctx *qedi,
 		  struct qedi_conn *qedi_conn,
 		  struct iscsi_task *task);
+void qedi_clear_session_ctx(struct iscsi_cls_session *cls_sess);
 
 #endif
diff --git a/drivers/scsi/qedi/qedi_iscsi.c b/drivers/scsi/qedi/qedi_iscsi.c
index 8829880..1f4a5fb 100644
--- a/drivers/scsi/qedi/qedi_iscsi.c
+++ b/drivers/scsi/qedi/qedi_iscsi.c
@@ -392,6 +392,7 @@ static int qedi_conn_bind(struct iscsi_cls_session *cls_session,
 
 	qedi_ep->conn = qedi_conn;
 	qedi_conn->ep = qedi_ep;
+	qedi_conn->iscsi_ep = ep;
 	qedi_conn->iscsi_conn_id = qedi_ep->iscsi_cid;
 	qedi_conn->fw_cid = qedi_ep->fw_cid;
 	qedi_conn->cmd_cleanup_req = 0;
@@ -782,6 +783,9 @@ static int qedi_task_xmit(struct iscsi_task *task)
 	struct qedi_cmd *cmd = task->dd_data;
 	struct scsi_cmnd *sc = task->sc;
 
+	if (test_bit(QEDI_IN_SHUTDOWN, &qedi_conn->qedi->flags))
+		return -ENODEV;
+
 	cmd->state = 0;
 	cmd->task = NULL;
 	cmd->use_slowpath = false;
@@ -1596,6 +1600,20 @@ void qedi_process_iscsi_error(struct qedi_endpoint *ep,
 		qedi_start_conn_recovery(qedi_conn->qedi, qedi_conn);
 }
 
+void qedi_clear_session_ctx(struct iscsi_cls_session *cls_sess)
+{
+	struct iscsi_session *session = cls_sess->dd_data;
+	struct iscsi_conn *conn = session->leadconn;
+	struct qedi_conn *qedi_conn = conn->dd_data;
+
+	if (iscsi_is_session_online(cls_sess))
+		qedi_ep_disconnect(qedi_conn->iscsi_ep);
+
+	qedi_conn_destroy(qedi_conn->cls_conn);
+
+	qedi_session_destroy(cls_sess);
+}
+
 void qedi_process_tcp_error(struct qedi_endpoint *ep,
 			    struct iscsi_eqe_data *data)
 {
diff --git a/drivers/scsi/qedi/qedi_iscsi.h b/drivers/scsi/qedi/qedi_iscsi.h
index 67c3b73..39dc27c 100644
--- a/drivers/scsi/qedi/qedi_iscsi.h
+++ b/drivers/scsi/qedi/qedi_iscsi.h
@@ -149,6 +149,7 @@ struct qedi_conn {
 	struct iscsi_cls_conn *cls_conn;
 	struct qedi_ctx *qedi;
 	struct qedi_endpoint *ep;
+	struct iscsi_endpoint *iscsi_ep;
 	struct list_head active_cmd_list;
 	spinlock_t list_lock;		/* internal conn lock */
 	u32 active_cmd_count;
diff --git a/drivers/scsi/qedi/qedi_main.c b/drivers/scsi/qedi/qedi_main.c
index acb930b..b995b19 100644
--- a/drivers/scsi/qedi/qedi_main.c
+++ b/drivers/scsi/qedi/qedi_main.c
@@ -58,6 +58,7 @@ static struct qedi_cmd *qedi_get_cmd_from_tid(struct qedi_ctx *qedi, u32 tid);
 static void qedi_reset_uio_rings(struct qedi_uio_dev *udev);
 static void qedi_ll2_free_skbs(struct qedi_ctx *qedi);
 static struct nvm_iscsi_block *qedi_get_nvram_block(struct qedi_ctx *qedi);
+static void qedi_recovery_handler(struct work_struct *work);
 
 static int qedi_iscsi_event_cb(void *context, u8 fw_event_code, void *fw_handle)
 {
@@ -1113,6 +1114,20 @@ static void qedi_get_protocol_tlv_data(void *dev, void *data)
 	return;
 }
 
+static void qedi_schedule_recovery_handler(void *dev)
+{
+	struct qedi_ctx *qedi = dev;
+
+	QEDI_ERR(&qedi->dbg_ctx, "Recovery handler scheduled.\n");
+
+	if (test_and_set_bit(QEDI_IN_RECOVERY, &qedi->flags))
+		return;
+
+	atomic_set(&qedi->link_state, QEDI_LINK_DOWN);
+
+	schedule_delayed_work(&qedi->recovery_work, 0);
+}
+
 static void qedi_link_update(void *dev, struct qed_link_output *link)
 {
 	struct qedi_ctx *qedi = (struct qedi_ctx *)dev;
@@ -1130,6 +1145,7 @@ static void qedi_link_update(void *dev, struct qed_link_output *link)
 static struct qed_iscsi_cb_ops qedi_cb_ops = {
 	{
 		.link_update =		qedi_link_update,
+		.schedule_recovery_handler = qedi_schedule_recovery_handler,
 		.get_protocol_tlv_data = qedi_get_protocol_tlv_data,
 		.get_generic_tlv_data = qedi_get_generic_tlv_data,
 	}
@@ -2328,16 +2344,22 @@ static void __qedi_remove(struct pci_dev *pdev, int mode)
 	struct qedi_ctx *qedi = pci_get_drvdata(pdev);
 	int rval;
 
-	if (qedi->tmf_thread) {
-		flush_workqueue(qedi->tmf_thread);
-		destroy_workqueue(qedi->tmf_thread);
-		qedi->tmf_thread = NULL;
-	}
+	if (mode == QEDI_MODE_SHUTDOWN)
+		iscsi_host_for_each_session(qedi->shost,
+					    qedi_clear_session_ctx);
 
-	if (qedi->offload_thread) {
-		flush_workqueue(qedi->offload_thread);
-		destroy_workqueue(qedi->offload_thread);
-		qedi->offload_thread = NULL;
+	if (mode == QEDI_MODE_NORMAL || mode == QEDI_MODE_SHUTDOWN) {
+		if (qedi->tmf_thread) {
+			flush_workqueue(qedi->tmf_thread);
+			destroy_workqueue(qedi->tmf_thread);
+			qedi->tmf_thread = NULL;
+		}
+
+		if (qedi->offload_thread) {
+			flush_workqueue(qedi->offload_thread);
+			destroy_workqueue(qedi->offload_thread);
+			qedi->offload_thread = NULL;
+		}
 	}
 
 #ifdef CONFIG_DEBUG_FS
@@ -2353,8 +2375,7 @@ static void __qedi_remove(struct pci_dev *pdev, int mode)
 		qedi_ops->ll2->stop(qedi->cdev);
 	}
 
-	if (mode == QEDI_MODE_NORMAL)
-		qedi_free_iscsi_pf_param(qedi);
+	qedi_free_iscsi_pf_param(qedi);
 
 	rval = qedi_ops->common->update_drv_state(qedi->cdev, false);
 	if (rval)
@@ -2367,15 +2388,12 @@ static void __qedi_remove(struct pci_dev *pdev, int mode)
 
 	qedi_destroy_fp(qedi);
 
-	if (mode == QEDI_MODE_NORMAL) {
+	if (mode == QEDI_MODE_NORMAL || mode == QEDI_MODE_SHUTDOWN) {
 		qedi_release_cid_que(qedi);
 		qedi_cm_free_mem(qedi);
 		qedi_free_uio(qedi->udev);
 		qedi_free_itt(qedi);
 
-		iscsi_host_remove(qedi->shost);
-		iscsi_host_free(qedi->shost);
-
 		if (qedi->ll2_recv_thread) {
 			kthread_stop(qedi->ll2_recv_thread);
 			qedi->ll2_recv_thread = NULL;
@@ -2384,9 +2402,22 @@ static void __qedi_remove(struct pci_dev *pdev, int mode)
 
 		if (qedi->boot_kset)
 			iscsi_boot_destroy_kset(qedi->boot_kset);
+
+		iscsi_host_remove(qedi->shost);
+		iscsi_host_free(qedi->shost);
 	}
 }
 
+static void qedi_shutdown(struct pci_dev *pdev)
+{
+	struct qedi_ctx *qedi = pci_get_drvdata(pdev);
+
+	QEDI_ERR(&qedi->dbg_ctx, "%s: Shutdown qedi\n", __func__);
+	if (test_and_set_bit(QEDI_IN_SHUTDOWN, &qedi->flags))
+		return;
+	__qedi_remove(pdev, QEDI_MODE_SHUTDOWN);
+}
+
 static int __qedi_probe(struct pci_dev *pdev, int mode)
 {
 	struct qedi_ctx *qedi;
@@ -2435,14 +2466,12 @@ static int __qedi_probe(struct pci_dev *pdev, int mode)
 		  qedi->dev_info.common.num_hwfns,
 		  qedi_ops->common->get_affin_hwfn_idx(qedi->cdev));
 
-	if (mode != QEDI_MODE_RECOVERY) {
-		rc = qedi_set_iscsi_pf_param(qedi);
-		if (rc) {
-			rc = -ENOMEM;
-			QEDI_ERR(&qedi->dbg_ctx,
-				 "Set iSCSI pf param fail\n");
-			goto free_host;
-		}
+	rc = qedi_set_iscsi_pf_param(qedi);
+	if (rc) {
+		rc = -ENOMEM;
+		QEDI_ERR(&qedi->dbg_ctx,
+			 "Set iSCSI pf param fail\n");
+		goto free_host;
 	}
 
 	qedi_ops->common->update_pf_params(qedi->cdev, &qedi->pf_params);
@@ -2633,6 +2662,8 @@ static int __qedi_probe(struct pci_dev *pdev, int mode)
 			goto free_cid_que;
 		}
 
+		INIT_DELAYED_WORK(&qedi->recovery_work, qedi_recovery_handler);
+
 		/* F/w needs 1st task context memory entry for performance */
 		set_bit(QEDI_RESERVE_TASK_ID, qedi->task_idx_map);
 		atomic_set(&qedi->num_offloads, 0);
@@ -2673,6 +2704,32 @@ static int __qedi_probe(struct pci_dev *pdev, int mode)
 	return rc;
 }
 
+static void qedi_mark_conn_recovery(struct iscsi_cls_session *cls_session)
+{
+	struct iscsi_session *session = cls_session->dd_data;
+	struct iscsi_conn *conn = session->leadconn;
+	struct qedi_conn *qedi_conn = conn->dd_data;
+
+	iscsi_conn_failure(qedi_conn->cls_conn->dd_data, ISCSI_ERR_CONN_FAILED);
+}
+
+static void qedi_recovery_handler(struct work_struct *work)
+{
+	struct qedi_ctx *qedi =
+			container_of(work, struct qedi_ctx, recovery_work.work);
+
+	iscsi_host_for_each_session(qedi->shost, qedi_mark_conn_recovery);
+
+	/* Call common_ops->recovery_prolog to allow the MFW to quiesce
+	 * any PCI transactions.
+	 */
+	qedi_ops->common->recovery_prolog(qedi->cdev);
+
+	__qedi_remove(qedi->pdev, QEDI_MODE_RECOVERY);
+	__qedi_probe(qedi->pdev, QEDI_MODE_RECOVERY);
+	clear_bit(QEDI_IN_RECOVERY, &qedi->flags);
+}
+
 static int qedi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	return __qedi_probe(pdev, QEDI_MODE_NORMAL);
@@ -2697,6 +2754,7 @@ static struct pci_driver qedi_pci_driver = {
 	.id_table = qedi_pci_tbl,
 	.probe = qedi_probe,
 	.remove = qedi_remove,
+	.shutdown = qedi_shutdown,
 };
 
 static int __init qedi_init(void)
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index d7e7043..97cabd7 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -1324,6 +1324,79 @@ qla2x00_beacon_store(struct device *dev, struct device_attribute *attr,
 }
 
 static ssize_t
+qla2x00_beacon_config_show(struct device *dev, struct device_attribute *attr,
+	char *buf)
+{
+	scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
+	struct qla_hw_data *ha = vha->hw;
+	uint16_t led[3] = { 0 };
+
+	if (!IS_QLA2031(ha) && !IS_QLA27XX(ha) && !IS_QLA28XX(ha))
+		return -EPERM;
+
+	if (ql26xx_led_config(vha, 0, led))
+		return scnprintf(buf, PAGE_SIZE, "\n");
+
+	return scnprintf(buf, PAGE_SIZE, "%#04hx %#04hx %#04hx\n",
+	    led[0], led[1], led[2]);
+}
+
+static ssize_t
+qla2x00_beacon_config_store(struct device *dev, struct device_attribute *attr,
+	const char *buf, size_t count)
+{
+	scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
+	struct qla_hw_data *ha = vha->hw;
+	uint16_t options = BIT_0;
+	uint16_t led[3] = { 0 };
+	uint16_t word[4];
+	int n;
+
+	if (!IS_QLA2031(ha) && !IS_QLA27XX(ha) && !IS_QLA28XX(ha))
+		return -EPERM;
+
+	n = sscanf(buf, "%hx %hx %hx %hx", word+0, word+1, word+2, word+3);
+	if (n == 4) {
+		if (word[0] == 3) {
+			options |= BIT_3|BIT_2|BIT_1;
+			led[0] = word[1];
+			led[1] = word[2];
+			led[2] = word[3];
+			goto write;
+		}
+		return -EINVAL;
+	}
+
+	if (n == 2) {
+		/* check led index */
+		if (word[0] == 0) {
+			options |= BIT_2;
+			led[0] = word[1];
+			goto write;
+		}
+		if (word[0] == 1) {
+			options |= BIT_3;
+			led[1] = word[1];
+			goto write;
+		}
+		if (word[0] == 2) {
+			options |= BIT_1;
+			led[2] = word[1];
+			goto write;
+		}
+		return -EINVAL;
+	}
+
+	return -EINVAL;
+
+write:
+	if (ql26xx_led_config(vha, options, led))
+		return -EFAULT;
+
+	return count;
+}
+
+static ssize_t
 qla2x00_optrom_bios_version_show(struct device *dev,
 				 struct device_attribute *attr, char *buf)
 {
@@ -2250,6 +2323,26 @@ qla2x00_port_no_show(struct device *dev, struct device_attribute *attr,
 	return scnprintf(buf, PAGE_SIZE, "%u\n", vha->hw->port_no);
 }
 
+static ssize_t
+qla2x00_dport_diagnostics_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
+
+	if (!IS_QLA83XX(vha->hw) && !IS_QLA27XX(vha->hw) &&
+	    !IS_QLA28XX(vha->hw))
+		return scnprintf(buf, PAGE_SIZE, "\n");
+
+	if (!*vha->dport_data)
+		return scnprintf(buf, PAGE_SIZE, "\n");
+
+	return scnprintf(buf, PAGE_SIZE, "%04x %04x %04x %04x\n",
+	    vha->dport_data[0], vha->dport_data[1],
+	    vha->dport_data[2], vha->dport_data[3]);
+}
+static DEVICE_ATTR(dport_diagnostics, 0444,
+	   qla2x00_dport_diagnostics_show, NULL);
+
 static DEVICE_ATTR(driver_version, S_IRUGO, qla2x00_driver_version_show, NULL);
 static DEVICE_ATTR(fw_version, S_IRUGO, qla2x00_fw_version_show, NULL);
 static DEVICE_ATTR(serial_num, S_IRUGO, qla2x00_serial_num_show, NULL);
@@ -2264,6 +2357,8 @@ static DEVICE_ATTR(zio_timer, S_IRUGO | S_IWUSR, qla2x00_zio_timer_show,
 		   qla2x00_zio_timer_store);
 static DEVICE_ATTR(beacon, S_IRUGO | S_IWUSR, qla2x00_beacon_show,
 		   qla2x00_beacon_store);
+static DEVICE_ATTR(beacon_config, 0644, qla2x00_beacon_config_show,
+		   qla2x00_beacon_config_store);
 static DEVICE_ATTR(optrom_bios_version, S_IRUGO,
 		   qla2x00_optrom_bios_version_show, NULL);
 static DEVICE_ATTR(optrom_efi_version, S_IRUGO,
@@ -2327,6 +2422,7 @@ struct device_attribute *qla2x00_host_attrs[] = {
 	&dev_attr_zio,
 	&dev_attr_zio_timer,
 	&dev_attr_beacon,
+	&dev_attr_beacon_config,
 	&dev_attr_optrom_bios_version,
 	&dev_attr_optrom_efi_version,
 	&dev_attr_optrom_fcode_version,
@@ -2355,6 +2451,7 @@ struct device_attribute *qla2x00_host_attrs[] = {
 	&dev_attr_port_speed,
 	&dev_attr_port_no,
 	&dev_attr_fw_attr,
+	&dev_attr_dport_diagnostics,
 	NULL, /* reserve for qlini_mode */
 	NULL, /* reserve for ql2xiniexchg */
 	NULL, /* reserve for ql2xexchoffld */
@@ -2648,22 +2745,28 @@ qla2x00_get_fc_host_stats(struct Scsi_Host *shost)
 	if (rval != QLA_SUCCESS)
 		goto done_free;
 
-	p->link_failure_count = stats->link_fail_cnt;
-	p->loss_of_sync_count = stats->loss_sync_cnt;
-	p->loss_of_signal_count = stats->loss_sig_cnt;
-	p->prim_seq_protocol_err_count = stats->prim_seq_err_cnt;
-	p->invalid_tx_word_count = stats->inval_xmit_word_cnt;
-	p->invalid_crc_count = stats->inval_crc_cnt;
+	p->link_failure_count = le32_to_cpu(stats->link_fail_cnt);
+	p->loss_of_sync_count = le32_to_cpu(stats->loss_sync_cnt);
+	p->loss_of_signal_count = le32_to_cpu(stats->loss_sig_cnt);
+	p->prim_seq_protocol_err_count = le32_to_cpu(stats->prim_seq_err_cnt);
+	p->invalid_tx_word_count = le32_to_cpu(stats->inval_xmit_word_cnt);
+	p->invalid_crc_count = le32_to_cpu(stats->inval_crc_cnt);
 	if (IS_FWI2_CAPABLE(ha)) {
-		p->lip_count = stats->lip_cnt;
-		p->tx_frames = stats->tx_frames;
-		p->rx_frames = stats->rx_frames;
-		p->dumped_frames = stats->discarded_frames;
-		p->nos_count = stats->nos_rcvd;
+		p->lip_count = le32_to_cpu(stats->lip_cnt);
+		p->tx_frames = le32_to_cpu(stats->tx_frames);
+		p->rx_frames = le32_to_cpu(stats->rx_frames);
+		p->dumped_frames = le32_to_cpu(stats->discarded_frames);
+		p->nos_count = le32_to_cpu(stats->nos_rcvd);
 		p->error_frames =
-			stats->dropped_frames + stats->discarded_frames;
-		p->rx_words = vha->qla_stats.input_bytes;
-		p->tx_words = vha->qla_stats.output_bytes;
+		    le32_to_cpu(stats->dropped_frames) +
+		    le32_to_cpu(stats->discarded_frames);
+		if (IS_QLA83XX(ha) || IS_QLA27XX(ha) || IS_QLA28XX(ha)) {
+			p->rx_words = le64_to_cpu(stats->fpm_recv_word_cnt);
+			p->tx_words = le64_to_cpu(stats->fpm_xmit_word_cnt);
+		} else {
+			p->rx_words = vha->qla_stats.input_bytes;
+			p->tx_words = vha->qla_stats.output_bytes;
+		}
 	}
 	p->fcp_control_requests = vha->qla_stats.control_requests;
 	p->fcp_input_requests = vha->qla_stats.input_requests;
@@ -2671,7 +2774,7 @@ qla2x00_get_fc_host_stats(struct Scsi_Host *shost)
 	p->fcp_input_megabytes = vha->qla_stats.input_bytes >> 20;
 	p->fcp_output_megabytes = vha->qla_stats.output_bytes >> 20;
 	p->seconds_since_last_reset =
-		get_jiffies_64() - vha->qla_stats.jiffies_at_last_reset;
+	    get_jiffies_64() - vha->qla_stats.jiffies_at_last_reset;
 	do_div(p->seconds_since_last_reset, HZ);
 
 done_free:
diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c
index d7169e4..97b51c4 100644
--- a/drivers/scsi/qla2xxx/qla_bsg.c
+++ b/drivers/scsi/qla2xxx/qla_bsg.c
@@ -11,6 +11,14 @@
 #include <linux/delay.h>
 #include <linux/bsg-lib.h>
 
+static void qla2xxx_free_fcport_work(struct work_struct *work)
+{
+	struct fc_port *fcport = container_of(work, typeof(*fcport),
+	    free_work);
+
+	qla2x00_free_fcport(fcport);
+}
+
 /* BSG support for ELS/CT pass through */
 void qla2x00_bsg_job_done(srb_t *sp, int res)
 {
@@ -53,8 +61,10 @@ void qla2x00_bsg_sp_free(srb_t *sp)
 
 	if (sp->type == SRB_CT_CMD ||
 	    sp->type == SRB_FXIOCB_BCMD ||
-	    sp->type == SRB_ELS_CMD_HST)
-		qla2x00_free_fcport(sp->fcport);
+	    sp->type == SRB_ELS_CMD_HST) {
+		INIT_WORK(&sp->fcport->free_work, qla2xxx_free_fcport_work);
+		queue_work(ha->wq, &sp->fcport->free_work);
+	}
 
 	qla2x00_rel_sp(sp);
 }
@@ -718,7 +728,7 @@ qla2x00_process_loopback(struct bsg_job *bsg_job)
 	uint16_t response[MAILBOX_REGISTER_COUNT];
 	uint16_t config[4], new_config[4];
 	uint8_t *fw_sts_ptr;
-	uint8_t *req_data = NULL;
+	void *req_data = NULL;
 	dma_addr_t req_data_dma;
 	uint32_t req_data_len;
 	uint8_t *rsp_data = NULL;
@@ -796,10 +806,11 @@ qla2x00_process_loopback(struct bsg_job *bsg_job)
 	    bsg_request->rqst_data.h_vendor.vendor_cmd[2];
 
 	if (atomic_read(&vha->loop_state) == LOOP_READY &&
-	    (ha->current_topology == ISP_CFG_F ||
-	    (get_unaligned_le32(req_data) == ELS_OPCODE_BYTE &&
-	     req_data_len == MAX_ELS_FRAME_PAYLOAD)) &&
-	    elreq.options == EXTERNAL_LOOPBACK) {
+	    ((ha->current_topology == ISP_CFG_F && (elreq.options & 7) >= 2) ||
+	    ((IS_QLA81XX(ha) || IS_QLA8031(ha) || IS_QLA8044(ha)) &&
+	    get_unaligned_le32(req_data) == ELS_OPCODE_BYTE &&
+	    req_data_len == MAX_ELS_FRAME_PAYLOAD &&
+	    elreq.options == EXTERNAL_LOOPBACK))) {
 		type = "FC_BSG_HST_VENDOR_ECHO_DIAG";
 		ql_dbg(ql_dbg_user, vha, 0x701e,
 		    "BSG request type: %s.\n", type);
@@ -1506,10 +1517,15 @@ qla2x00_update_optrom(struct bsg_job *bsg_job)
 	    bsg_job->request_payload.sg_cnt, ha->optrom_buffer,
 	    ha->optrom_region_size);
 
-	ha->isp_ops->write_optrom(vha, ha->optrom_buffer,
+	rval = ha->isp_ops->write_optrom(vha, ha->optrom_buffer,
 	    ha->optrom_region_start, ha->optrom_region_size);
 
-	bsg_reply->result = DID_OK;
+	if (rval) {
+		bsg_reply->result = -EINVAL;
+		rval = -EINVAL;
+	} else {
+		bsg_reply->result = DID_OK;
+	}
 	vfree(ha->optrom_buffer);
 	ha->optrom_buffer = NULL;
 	ha->optrom_state = QLA_SWAITING;
@@ -2404,7 +2420,7 @@ qla2x00_get_flash_image_status(struct bsg_job *bsg_job)
 	regions.global_image = active_regions.global;
 
 	if (IS_QLA28XX(ha)) {
-		qla27xx_get_active_image(vha, &active_regions);
+		qla28xx_get_aux_images(vha, &active_regions);
 		regions.board_config = active_regions.aux.board_config;
 		regions.vpd_nvram = active_regions.aux.vpd_nvram;
 		regions.npiv_config_0_1 = active_regions.aux.npiv_config_0_1;
diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index 88a56e8..bf1e98f 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -73,6 +73,8 @@
 #include "qla_def.h"
 
 #include <linux/delay.h>
+#define CREATE_TRACE_POINTS
+#include <trace/events/qla.h>
 
 static uint32_t ql_dbg_offset = 0x800;
 
@@ -2538,14 +2540,30 @@ ql_dbg(uint level, scsi_qla_host_t *vha, uint id, const char *fmt, ...)
 	va_list va;
 	struct va_format vaf;
 
-	if (!ql_mask_match(level))
-		return;
-
 	va_start(va, fmt);
 
 	vaf.fmt = fmt;
 	vaf.va = &va;
 
+	if (!ql_mask_match(level)) {
+		char pbuf[64];
+
+		if (vha != NULL) {
+			const struct pci_dev *pdev = vha->hw->pdev;
+			/* <module-name> <msg-id>:<host> Message */
+			snprintf(pbuf, sizeof(pbuf), "%s [%s]-%04x:%ld: ",
+			    QL_MSGHDR, dev_name(&(pdev->dev)), id,
+			    vha->host_no);
+		} else {
+			snprintf(pbuf, sizeof(pbuf), "%s [%s]-%04x: : ",
+			    QL_MSGHDR, "0000:00:00.0", id);
+		}
+		pbuf[sizeof(pbuf) - 1] = 0;
+		trace_ql_dbg_log(pbuf, &vaf);
+		va_end(va);
+		return;
+	}
+
 	if (vha != NULL) {
 		const struct pci_dev *pdev = vha->hw->pdev;
 		/* <module-name> <pci-name> <msg-id>:<host> Message */
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index ed32e97..47c7a56 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -119,7 +119,10 @@ typedef struct {
 #define LSD(x)	((uint32_t)((uint64_t)(x)))
 #define MSD(x)	((uint32_t)((((uint64_t)(x)) >> 16) >> 16))
 
-#define MAKE_HANDLE(x, y) ((uint32_t)((((uint32_t)(x)) << 16) | (uint32_t)(y)))
+static inline uint32_t make_handle(uint16_t x, uint16_t y)
+{
+	return ((uint32_t)x << 16) | y;
+}
 
 /*
  * I/O register
@@ -414,7 +417,7 @@ struct els_logo_payload {
 struct els_plogi_payload {
 	uint8_t opcode;
 	uint8_t rsvd[3];
-	uint8_t data[112];
+	__be32	data[112 / 4];
 };
 
 struct ct_arg {
@@ -597,9 +600,6 @@ typedef struct srb {
 	struct fc_port *fcport;
 	struct scsi_qla_host *vha;
 	unsigned int start_timer:1;
-	unsigned int abort:1;
-	unsigned int aborted:1;
-	unsigned int completed:1;
 
 	uint32_t handle;
 	uint16_t flags;
@@ -1049,6 +1049,7 @@ static inline bool qla2xxx_is_valid_mbs(unsigned int mbs)
 #define MBA_TEMPERATURE_ALERT	0x8070	/* Temperature Alert */
 #define MBA_DPORT_DIAGNOSTICS	0x8080	/* D-port Diagnostics */
 #define MBA_TRANS_INSERT	0x8130	/* Transceiver Insertion */
+#define MBA_TRANS_REMOVE	0x8131	/* Transceiver Removal */
 #define MBA_FW_INIT_FAILURE	0x8401	/* Firmware initialization failure */
 #define MBA_MIRROR_LUN_CHANGE	0x8402	/* Mirror LUN State Change
 					   Notification */
@@ -1134,6 +1135,7 @@ static inline bool qla2xxx_is_valid_mbs(unsigned int mbs)
 #define MBC_GET_FIRMWARE_OPTION		0x28	/* Get Firmware Options. */
 #define MBC_GET_MEM_OFFLOAD_CNTRL_STAT	0x34	/* Memory Offload ctrl/Stat*/
 #define MBC_SET_FIRMWARE_OPTION		0x38	/* Set Firmware Options. */
+#define MBC_SET_GET_FC_LED_CONFIG	0x3b	/* Set/Get FC LED config */
 #define MBC_LOOP_PORT_BYPASS		0x40	/* Loop Port Bypass. */
 #define MBC_LOOP_PORT_ENABLE		0x41	/* Loop Port Enable. */
 #define MBC_GET_RESOURCE_COUNTS		0x42	/* Get Resource Counts. */
@@ -1260,10 +1262,15 @@ static inline bool qla2xxx_is_valid_mbs(unsigned int mbs)
 #define	MBX_1		BIT_1
 #define	MBX_0		BIT_0
 
+#define RNID_TYPE_ELS_CMD	0x5
 #define RNID_TYPE_PORT_LOGIN	0x7
+#define RNID_BUFFER_CREDITS	0x8
 #define RNID_TYPE_SET_VERSION	0x9
 #define RNID_TYPE_ASIC_TEMP	0xC
 
+#define ELS_CMD_MAP_SIZE	32
+#define ELS_COMMAND_RDP		0x18
+
 /*
  * Firmware state codes from get firmware state mailbox command
  */
@@ -1474,47 +1481,44 @@ typedef struct {
 #define GLSO_USE_DID	BIT_3
 
 struct link_statistics {
-	uint32_t link_fail_cnt;
-	uint32_t loss_sync_cnt;
-	uint32_t loss_sig_cnt;
-	uint32_t prim_seq_err_cnt;
-	uint32_t inval_xmit_word_cnt;
-	uint32_t inval_crc_cnt;
-	uint32_t lip_cnt;
-	uint32_t link_up_cnt;
-	uint32_t link_down_loop_init_tmo;
-	uint32_t link_down_los;
-	uint32_t link_down_loss_rcv_clk;
+	__le32 link_fail_cnt;
+	__le32 loss_sync_cnt;
+	__le32 loss_sig_cnt;
+	__le32 prim_seq_err_cnt;
+	__le32 inval_xmit_word_cnt;
+	__le32 inval_crc_cnt;
+	__le32 lip_cnt;
+	__le32 link_up_cnt;
+	__le32 link_down_loop_init_tmo;
+	__le32 link_down_los;
+	__le32 link_down_loss_rcv_clk;
 	uint32_t reserved0[5];
-	uint32_t port_cfg_chg;
+	__le32 port_cfg_chg;
 	uint32_t reserved1[11];
-	uint32_t rsp_q_full;
-	uint32_t atio_q_full;
-	uint32_t drop_ae;
-	uint32_t els_proto_err;
-	uint32_t reserved2;
-	uint32_t tx_frames;
-	uint32_t rx_frames;
-	uint32_t discarded_frames;
-	uint32_t dropped_frames;
+	__le32 rsp_q_full;
+	__le32 atio_q_full;
+	__le32 drop_ae;
+	__le32 els_proto_err;
+	__le32 reserved2;
+	__le32 tx_frames;
+	__le32 rx_frames;
+	__le32 discarded_frames;
+	__le32 dropped_frames;
 	uint32_t reserved3;
-	uint32_t nos_rcvd;
+	__le32 nos_rcvd;
 	uint32_t reserved4[4];
-	uint32_t tx_prjt;
-	uint32_t rcv_exfail;
-	uint32_t rcv_abts;
-	uint32_t seq_frm_miss;
-	uint32_t corr_err;
-	uint32_t mb_rqst;
-	uint32_t nport_full;
-	uint32_t eofa;
+	__le32 tx_prjt;
+	__le32 rcv_exfail;
+	__le32 rcv_abts;
+	__le32 seq_frm_miss;
+	__le32 corr_err;
+	__le32 mb_rqst;
+	__le32 nport_full;
+	__le32 eofa;
 	uint32_t reserved5;
-	uint32_t fpm_recv_word_cnt_lo;
-	uint32_t fpm_recv_word_cnt_hi;
-	uint32_t fpm_disc_word_cnt_lo;
-	uint32_t fpm_disc_word_cnt_hi;
-	uint32_t fpm_xmit_word_cnt_lo;
-	uint32_t fpm_xmit_word_cnt_hi;
+	__le64 fpm_recv_word_cnt;
+	__le64 fpm_disc_word_cnt;
+	__le64 fpm_xmit_word_cnt;
 	uint32_t reserved6[70];
 };
 
@@ -2624,10 +2628,11 @@ static const char * const port_dstate_str[] = {
 #define GFF_ID_RSP_SIZE (16 + 128)
 
 /*
- * HBA attribute types.
+ * FDMI HBA attribute types.
  */
-#define FDMI_HBA_ATTR_COUNT			9
-#define FDMIV2_HBA_ATTR_COUNT			17
+#define FDMI1_HBA_ATTR_COUNT			9
+#define FDMI2_HBA_ATTR_COUNT			17
+
 #define FDMI_HBA_NODE_NAME			0x1
 #define FDMI_HBA_MANUFACTURER			0x2
 #define FDMI_HBA_SERIAL_NUMBER			0x3
@@ -2639,12 +2644,13 @@ static const char * const port_dstate_str[] = {
 #define FDMI_HBA_FIRMWARE_VERSION		0x9
 #define FDMI_HBA_OS_NAME_AND_VERSION		0xa
 #define FDMI_HBA_MAXIMUM_CT_PAYLOAD_LENGTH	0xb
+
 #define FDMI_HBA_NODE_SYMBOLIC_NAME		0xc
-#define FDMI_HBA_VENDOR_ID			0xd
+#define FDMI_HBA_VENDOR_SPECIFIC_INFO		0xd
 #define FDMI_HBA_NUM_PORTS			0xe
 #define FDMI_HBA_FABRIC_NAME			0xf
 #define FDMI_HBA_BOOT_BIOS_NAME			0x10
-#define FDMI_HBA_TYPE_VENDOR_IDENTIFIER		0xe0
+#define FDMI_HBA_VENDOR_IDENTIFIER		0xe0
 
 struct ct_fdmi_hba_attr {
 	uint16_t type;
@@ -2661,31 +2667,9 @@ struct ct_fdmi_hba_attr {
 		uint8_t fw_version[32];
 		uint8_t os_version[128];
 		uint32_t max_ct_len;
-	} a;
-};
 
-struct ct_fdmi_hba_attributes {
-	uint32_t count;
-	struct ct_fdmi_hba_attr entry[FDMI_HBA_ATTR_COUNT];
-};
-
-struct ct_fdmiv2_hba_attr {
-	uint16_t type;
-	uint16_t len;
-	union {
-		uint8_t node_name[WWN_SIZE];
-		uint8_t manufacturer[64];
-		uint8_t serial_num[32];
-		uint8_t model[16+1];
-		uint8_t model_desc[80];
-		uint8_t hw_version[16];
-		uint8_t driver_version[32];
-		uint8_t orom_version[16];
-		uint8_t fw_version[32];
-		uint8_t os_version[128];
-		uint32_t max_ct_len;
 		uint8_t sym_name[256];
-		uint32_t vendor_id;
+		uint32_t vendor_specific_info;
 		uint32_t num_ports;
 		uint8_t fabric_name[WWN_SIZE];
 		uint8_t bios_name[32];
@@ -2693,22 +2677,30 @@ struct ct_fdmiv2_hba_attr {
 	} a;
 };
 
-struct ct_fdmiv2_hba_attributes {
+struct ct_fdmi1_hba_attributes {
 	uint32_t count;
-	struct ct_fdmiv2_hba_attr entry[FDMIV2_HBA_ATTR_COUNT];
+	struct ct_fdmi_hba_attr entry[FDMI1_HBA_ATTR_COUNT];
+};
+
+struct ct_fdmi2_hba_attributes {
+	uint32_t count;
+	struct ct_fdmi_hba_attr entry[FDMI2_HBA_ATTR_COUNT];
 };
 
 /*
- * Port attribute types.
+ * FDMI Port attribute types.
  */
-#define FDMI_PORT_ATTR_COUNT		6
-#define FDMIV2_PORT_ATTR_COUNT		16
+#define FDMI1_PORT_ATTR_COUNT		6
+#define FDMI2_PORT_ATTR_COUNT		16
+#define FDMI2_SMARTSAN_PORT_ATTR_COUNT	23
+
 #define FDMI_PORT_FC4_TYPES		0x1
 #define FDMI_PORT_SUPPORT_SPEED		0x2
 #define FDMI_PORT_CURRENT_SPEED		0x3
 #define FDMI_PORT_MAX_FRAME_SIZE	0x4
 #define FDMI_PORT_OS_DEVICE_NAME	0x5
 #define FDMI_PORT_HOST_NAME		0x6
+
 #define FDMI_PORT_NODE_NAME		0x7
 #define FDMI_PORT_NAME			0x8
 #define FDMI_PORT_SYM_NAME		0x9
@@ -2718,7 +2710,15 @@ struct ct_fdmiv2_hba_attributes {
 #define FDMI_PORT_FC4_TYPE		0xd
 #define FDMI_PORT_STATE			0x101
 #define FDMI_PORT_COUNT			0x102
-#define FDMI_PORT_ID			0x103
+#define FDMI_PORT_IDENTIFIER		0x103
+
+#define FDMI_SMARTSAN_SERVICE		0xF100
+#define FDMI_SMARTSAN_GUID		0xF101
+#define FDMI_SMARTSAN_VERSION		0xF102
+#define FDMI_SMARTSAN_PROD_NAME		0xF103
+#define FDMI_SMARTSAN_PORT_INFO		0xF104
+#define FDMI_SMARTSAN_QOS_SUPPORT	0xF105
+#define FDMI_SMARTSAN_SECURITY_SUPPORT	0xF106
 
 #define FDMI_PORT_SPEED_1GB		0x1
 #define FDMI_PORT_SPEED_2GB		0x2
@@ -2734,37 +2734,6 @@ struct ct_fdmiv2_hba_attributes {
 #define FC_CLASS_3	0x08
 #define FC_CLASS_2_3	0x0C
 
-struct ct_fdmiv2_port_attr {
-	uint16_t type;
-	uint16_t len;
-	union {
-		uint8_t fc4_types[32];
-		uint32_t sup_speed;
-		uint32_t cur_speed;
-		uint32_t max_frame_size;
-		uint8_t os_dev_name[32];
-		uint8_t host_name[256];
-		uint8_t node_name[WWN_SIZE];
-		uint8_t port_name[WWN_SIZE];
-		uint8_t port_sym_name[128];
-		uint32_t port_type;
-		uint32_t port_supported_cos;
-		uint8_t fabric_name[WWN_SIZE];
-		uint8_t port_fc4_type[32];
-		uint32_t port_state;
-		uint32_t num_ports;
-		uint32_t port_id;
-	} a;
-};
-
-/*
- * Port Attribute Block.
- */
-struct ct_fdmiv2_port_attributes {
-	uint32_t count;
-	struct ct_fdmiv2_port_attr entry[FDMIV2_PORT_ATTR_COUNT];
-};
-
 struct ct_fdmi_port_attr {
 	uint16_t type;
 	uint16_t len;
@@ -2775,14 +2744,49 @@ struct ct_fdmi_port_attr {
 		uint32_t max_frame_size;
 		uint8_t os_dev_name[32];
 		uint8_t host_name[256];
+
+		uint8_t node_name[WWN_SIZE];
+		uint8_t port_name[WWN_SIZE];
+		uint8_t port_sym_name[128];
+		uint32_t port_type;
+		uint32_t port_supported_cos;
+		uint8_t fabric_name[WWN_SIZE];
+		uint8_t port_fc4_type[32];
+		uint32_t port_state;
+		uint32_t num_ports;
+		uint32_t port_id;
+
+		uint8_t smartsan_service[24];
+		uint8_t smartsan_guid[16];
+		uint8_t smartsan_version[24];
+		uint8_t smartsan_prod_name[16];
+		uint32_t smartsan_port_info;
+		uint32_t smartsan_qos_support;
+		uint32_t smartsan_security_support;
 	} a;
 };
 
-struct ct_fdmi_port_attributes {
+struct ct_fdmi1_port_attributes {
 	uint32_t count;
-	struct ct_fdmi_port_attr entry[FDMI_PORT_ATTR_COUNT];
+	struct ct_fdmi_port_attr entry[FDMI1_PORT_ATTR_COUNT];
 };
 
+struct ct_fdmi2_port_attributes {
+	uint32_t count;
+	struct ct_fdmi_port_attr entry[FDMI2_PORT_ATTR_COUNT];
+};
+
+#define FDMI_ATTR_TYPELEN(obj) \
+	(sizeof((obj)->type) + sizeof((obj)->len))
+
+#define FDMI_ATTR_ALIGNMENT(len) \
+	(4 - ((len) & 3))
+
+/* FDMI register call options */
+#define CALLOPT_FDMI1		0
+#define CALLOPT_FDMI2		1
+#define CALLOPT_FDMI2_SMARTSAN	2
+
 /* FDMI definitions. */
 #define GRHL_CMD	0x100
 #define GHAT_CMD	0x101
@@ -2793,10 +2797,13 @@ struct ct_fdmi_port_attributes {
 #define RHBA_RSP_SIZE	16
 
 #define RHAT_CMD	0x201
+
 #define RPRT_CMD	0x210
+#define RPRT_RSP_SIZE	24
 
 #define RPA_CMD		0x211
 #define RPA_RSP_SIZE	16
+#define SMARTSAN_RPA_RSP_SIZE	24
 
 #define DHBA_CMD	0x300
 #define DHBA_REQ_SIZE	(16 + 8)
@@ -2879,30 +2886,24 @@ struct ct_sns_req {
 			uint8_t hba_identifier[8];
 			uint32_t entry_count;
 			uint8_t port_name[8];
-			struct ct_fdmi_hba_attributes attrs;
+			struct ct_fdmi2_hba_attributes attrs;
 		} rhba;
 
 		struct {
 			uint8_t hba_identifier[8];
-			uint32_t entry_count;
-			uint8_t port_name[8];
-			struct ct_fdmiv2_hba_attributes attrs;
-		} rhba2;
-
-		struct {
-			uint8_t hba_identifier[8];
-			struct ct_fdmi_hba_attributes attrs;
+			struct ct_fdmi1_hba_attributes attrs;
 		} rhat;
 
 		struct {
 			uint8_t port_name[8];
-			struct ct_fdmi_port_attributes attrs;
+			struct ct_fdmi2_port_attributes attrs;
 		} rpa;
 
 		struct {
+			uint8_t hba_identifier[8];
 			uint8_t port_name[8];
-			struct ct_fdmiv2_port_attributes attrs;
-		} rpa2;
+			struct ct_fdmi2_port_attributes attrs;
+		} rprt;
 
 		struct {
 			uint8_t port_name[8];
@@ -3016,7 +3017,7 @@ struct ct_sns_rsp {
 		struct {
 			uint32_t entry_count;
 			uint8_t port_name[8];
-			struct ct_fdmi_hba_attributes attrs;
+			struct ct_fdmi1_hba_attributes attrs;
 		} ghat;
 
 		struct {
@@ -3250,6 +3251,7 @@ struct isp_operations {
 #define QLA_MSIX_RSP_Q			0x01
 #define QLA_ATIO_VECTOR		0x02
 #define QLA_MSIX_QPAIR_MULTIQ_RSP_Q	0x03
+#define QLA_MSIX_QPAIR_MULTIQ_RSP_Q_HS	0x04
 
 #define QLA_MIDX_DEFAULT	0
 #define QLA_MIDX_RSP_Q		1
@@ -3562,6 +3564,134 @@ struct qlfc_fw {
 	uint32_t len;
 };
 
+struct rdp_req_payload {
+	uint32_t	els_request;
+	uint32_t	desc_list_len;
+
+	/* NPIV descriptor */
+	struct {
+		uint32_t desc_tag;
+		uint32_t desc_len;
+		uint8_t  reserved;
+		uint8_t  nport_id[3];
+	} npiv_desc;
+};
+
+struct rdp_rsp_payload {
+	struct {
+		uint32_t cmd;
+		uint32_t len;
+	} hdr;
+
+	/* LS Request Info descriptor */
+	struct {
+		uint32_t desc_tag;
+		uint32_t desc_len;
+		uint32_t req_payload_word_0;
+	} ls_req_info_desc;
+
+	/* LS Request Info descriptor */
+	struct {
+		uint32_t desc_tag;
+		uint32_t desc_len;
+		uint32_t req_payload_word_0;
+	} ls_req_info_desc2;
+
+	/* SFP diagnostic param descriptor */
+	struct {
+		uint32_t desc_tag;
+		uint32_t desc_len;
+		uint16_t temperature;
+		uint16_t vcc;
+		uint16_t tx_bias;
+		uint16_t tx_power;
+		uint16_t rx_power;
+		uint16_t sfp_flags;
+	} sfp_diag_desc;
+
+	/* Port Speed Descriptor */
+	struct {
+		uint32_t desc_tag;
+		uint32_t desc_len;
+		uint16_t speed_capab;
+		uint16_t operating_speed;
+	} port_speed_desc;
+
+	/* Link Error Status Descriptor */
+	struct {
+		uint32_t desc_tag;
+		uint32_t desc_len;
+		uint32_t link_fail_cnt;
+		uint32_t loss_sync_cnt;
+		uint32_t loss_sig_cnt;
+		uint32_t prim_seq_err_cnt;
+		uint32_t inval_xmit_word_cnt;
+		uint32_t inval_crc_cnt;
+		uint8_t  pn_port_phy_type;
+		uint8_t  reserved[3];
+	} ls_err_desc;
+
+	/* Port name description with diag param */
+	struct {
+		uint32_t desc_tag;
+		uint32_t desc_len;
+		uint8_t WWNN[WWN_SIZE];
+		uint8_t WWPN[WWN_SIZE];
+	} port_name_diag_desc;
+
+	/* Port Name desc for Direct attached Fx_Port or Nx_Port */
+	struct {
+		uint32_t desc_tag;
+		uint32_t desc_len;
+		uint8_t WWNN[WWN_SIZE];
+		uint8_t WWPN[WWN_SIZE];
+	} port_name_direct_desc;
+
+	/* Buffer Credit descriptor */
+	struct {
+		uint32_t desc_tag;
+		uint32_t desc_len;
+		uint32_t fcport_b2b;
+		uint32_t attached_fcport_b2b;
+		uint32_t fcport_rtt;
+	} buffer_credit_desc;
+
+	/* Optical Element Data Descriptor */
+	struct {
+		uint32_t desc_tag;
+		uint32_t desc_len;
+		uint16_t high_alarm;
+		uint16_t low_alarm;
+		uint16_t high_warn;
+		uint16_t low_warn;
+		uint32_t element_flags;
+	} optical_elmt_desc[5];
+
+	/* Optical Product Data Descriptor */
+	struct {
+		uint32_t desc_tag;
+		uint32_t desc_len;
+		uint8_t  vendor_name[16];
+		uint8_t  part_number[16];
+		uint8_t  serial_number[16];
+		uint8_t  revision[4];
+		uint8_t  date[8];
+	} optical_prod_desc;
+};
+
+#define RDP_DESC_LEN(obj) \
+	(sizeof(obj) - sizeof((obj).desc_tag) - sizeof((obj).desc_len))
+
+#define RDP_PORT_SPEED_1GB		BIT_15
+#define RDP_PORT_SPEED_2GB		BIT_14
+#define RDP_PORT_SPEED_4GB		BIT_13
+#define RDP_PORT_SPEED_10GB		BIT_12
+#define RDP_PORT_SPEED_8GB		BIT_11
+#define RDP_PORT_SPEED_16GB		BIT_10
+#define RDP_PORT_SPEED_32GB		BIT_9
+#define RDP_PORT_SPEED_64GB             BIT_8
+#define RDP_PORT_SPEED_UNKNOWN		BIT_0
+
 struct scsi_qlt_host {
 	void *target_lport_ptr;
 	struct mutex tgt_mutex;
@@ -3673,8 +3803,8 @@ struct qla_hw_data {
 		uint32_t	fw_started:1;
 		uint32_t	fw_init_done:1;
 
-		uint32_t	detected_lr_sfp:1;
-		uint32_t	using_lr_setting:1;
+		uint32_t	lr_detected:1;
+
 		uint32_t	rida_fmt2:1;
 		uint32_t	purge_mbox:1;
 		uint32_t        n2n_bigger:1;
@@ -3683,7 +3813,7 @@ struct qla_hw_data {
 	} flags;
 
 	uint16_t max_exchg;
-	uint16_t long_range_distance;	/* 32G & above */
+	uint16_t lr_distance;	/* 32G & above */
 #define LR_DISTANCE_5K  1
 #define LR_DISTANCE_10K 0
 
@@ -3965,6 +4095,8 @@ struct qla_hw_data {
 
 #define SFP_DEV_SIZE    512
 #define SFP_BLOCK_SIZE  64
+#define SFP_RTDI_LEN	SFP_BLOCK_SIZE
+
 	void		*sfp_data;
 	dma_addr_t	sfp_data_dma;
 
@@ -4344,6 +4476,15 @@ struct active_regions {
 #define QLA_SET_DATA_RATE_NOLR	1
 #define QLA_SET_DATA_RATE_LR	2 /* Set speed and initiate LR */
 
+struct purex_item {
+	struct list_head list;
+	struct scsi_qla_host *vha;
+	void (*process_item)(struct scsi_qla_host *vha, void *pkt);
+	struct {
+		uint8_t iocb[64];
+	} iocb;
+};
+
 /*
  * Qlogic scsi host structure
  */
@@ -4424,6 +4565,8 @@ typedef struct scsi_qla_host {
 #define ISP_ABORT_TO_ROM	33
 #define VPORT_DELETE		34
 
+#define PROCESS_PUREX_IOCB	63
+
 	unsigned long	pci_flags;
 #define PFLG_DISCONNECTED	0	/* PCI device removed */
 #define PFLG_DRIVER_REMOVING	1	/* PCI driver .remove */
@@ -4461,6 +4604,7 @@ typedef struct scsi_qla_host {
 	uint8_t		node_name[WWN_SIZE];
 	uint8_t		port_name[WWN_SIZE];
 	uint8_t		fabric_node_name[WWN_SIZE];
+	uint8_t		fabric_port_name[WWN_SIZE];
 
 	struct		nvme_fc_local_port *nvme_local_port;
 	struct completion nvme_del_done;
@@ -4531,6 +4675,11 @@ typedef struct scsi_qla_host {
 	uint16_t ql2xexchoffld;
 	uint16_t ql2xiniexchg;
 
+	struct purex_list {
+		struct list_head head;
+		spinlock_t lock;
+	} purex_list;
+
 	struct name_list_extended gnl;
 	/* Count of active session/fcport */
 	int fcport_count;
@@ -4540,6 +4689,7 @@ typedef struct scsi_qla_host {
 	uint8_t n2n_node_name[WWN_SIZE];
 	uint8_t n2n_port_name[WWN_SIZE];
 	uint16_t	n2n_id;
+	__le16 dport_data[4];
 	struct list_head gpnid_list;
 	struct fab_scan scan;
 
@@ -4822,11 +4972,14 @@ struct sff_8247_a0 {
 	u8 resv2[128];
 };
 
-#define AUTO_DETECT_SFP_SUPPORT(_vha)\
-	(ql2xautodetectsfp && !_vha->vp_idx &&		\
-	(IS_QLA25XX(_vha->hw) || IS_QLA81XX(_vha->hw) ||\
-	IS_QLA83XX(_vha->hw) || IS_QLA27XX(_vha->hw) || \
-	 IS_QLA28XX(_vha->hw)))
+/* BPM -- Buffer Plus Management support. */
+#define IS_BPM_CAPABLE(ha) \
+	(IS_QLA25XX(ha) || IS_QLA81XX(ha) || IS_QLA83XX(ha) || \
+	 IS_QLA27XX(ha) || IS_QLA28XX(ha))
+#define IS_BPM_RANGE_CAPABLE(ha) \
+	(IS_QLA83XX(ha) || IS_QLA27XX(ha) || IS_QLA28XX(ha))
+#define IS_BPM_ENABLED(vha) \
+	(ql2xautodetectsfp && !vha->vp_idx && IS_BPM_CAPABLE(vha->hw))
 
 #define FLASH_SEMAPHORE_REGISTER_ADDR   0x00101016
 
diff --git a/drivers/scsi/qla2xxx/qla_dfs.c b/drivers/scsi/qla2xxx/qla_dfs.c
index 0a6fb35..e62b211 100644
--- a/drivers/scsi/qla2xxx/qla_dfs.c
+++ b/drivers/scsi/qla2xxx/qla_dfs.c
@@ -134,11 +134,11 @@ qla_dfs_fw_resource_cnt_show(struct seq_file *s, void *unused)
 	} else {
 		seq_puts(s, "FW Resource count\n\n");
 		seq_printf(s, "Original TGT exchg count[%d]\n", mb[1]);
-		seq_printf(s, "current TGT exchg count[%d]\n", mb[2]);
-		seq_printf(s, "original Initiator Exchange count[%d]\n", mb[3]);
-		seq_printf(s, "Current Initiator Exchange count[%d]\n", mb[6]);
-		seq_printf(s, "Original IOCB count[%d]\n", mb[7]);
-		seq_printf(s, "Current IOCB count[%d]\n", mb[10]);
+		seq_printf(s, "Current TGT exchg count[%d]\n", mb[2]);
+		seq_printf(s, "Current Initiator Exchange count[%d]\n", mb[3]);
+		seq_printf(s, "Original Initiator Exchange count[%d]\n", mb[6]);
+		seq_printf(s, "Current IOCB count[%d]\n", mb[7]);
+		seq_printf(s, "Original IOCB count[%d]\n", mb[10]);
 		seq_printf(s, "MAX VP count[%d]\n", mb[11]);
 		seq_printf(s, "MAX FCF count[%d]\n", mb[12]);
 		seq_printf(s, "Current free pageable XCB buffer cnt[%d]\n",
@@ -149,7 +149,6 @@ qla_dfs_fw_resource_cnt_show(struct seq_file *s, void *unused)
 		    mb[22]);
 		seq_printf(s, "Original Target fast XCB buffer cnt[%d]\n",
 		    mb[23]);
-
 	}
 
 	return 0;
diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h
index d641918..f9bad5b 100644
--- a/drivers/scsi/qla2xxx/qla_fw.h
+++ b/drivers/scsi/qla2xxx/qla_fw.h
@@ -31,6 +31,9 @@
 #define PDO_FORCE_ADISC		BIT_1
 #define PDO_FORCE_PLOGI		BIT_0
 
+struct buffer_credit_24xx {
+	u32 parameter[28];
+};
 
 #define	PORT_DATABASE_24XX_SIZE		64
 struct port_database_24xx {
@@ -721,6 +724,48 @@ struct ct_entry_24xx {
 };
 
 /*
+ * ISP queue - PUREX IOCB entry structure definition
+ */
+#define PUREX_IOCB_TYPE		0x51	/* CT Pass Through IOCB entry */
+struct purex_entry_24xx {
+	uint8_t entry_type;		/* Entry type. */
+	uint8_t entry_count;		/* Entry count. */
+	uint8_t sys_define;		/* System defined. */
+	uint8_t entry_status;		/* Entry Status. */
+
+	uint16_t reserved1;
+	uint8_t vp_idx;
+	uint8_t reserved2;
+
+	uint16_t status_flags;
+	uint16_t nport_handle;
+
+	uint16_t frame_size;
+	uint16_t trunc_frame_size;
+
+	uint32_t rx_xchg_addr;
+
+	uint8_t d_id[3];
+	uint8_t r_ctl;
+
+	uint8_t s_id[3];
+	uint8_t cs_ctl;
+
+	uint8_t f_ctl[3];
+	uint8_t type;
+
+	uint16_t seq_cnt;
+	uint8_t df_ctl;
+	uint8_t seq_id;
+
+	uint16_t rx_id;
+	uint16_t ox_id;
+	uint32_t param;
+
+	uint8_t els_frame_payload[20];
+};
+
+/*
  * ISP queue - ELS Pass-Through entry structure definition.
  */
 #define ELS_IOCB_TYPE		0x53	/* ELS Pass-Through IOCB entry */
@@ -732,9 +777,8 @@ struct els_entry_24xx {
 
 	uint32_t handle;		/* System handle. */
 
-	uint16_t reserved_1;
-
-	uint16_t nport_handle;		/* N_PORT handle. */
+	uint16_t comp_status;		/* response only */
+	uint16_t nport_handle;
 
 	uint16_t tx_dsd_count;
 
@@ -749,7 +793,7 @@ struct els_entry_24xx {
 	uint8_t opcode;
 	uint8_t reserved_2;
 
-	uint8_t port_id[3];
+	uint8_t d_id[3];
 	uint8_t s_id[3];
 
 	uint16_t control_flags;		/* Control flags. */
@@ -761,13 +805,24 @@ struct els_entry_24xx {
 #define ECF_CLR_PASSTHRU_PEND	BIT_12
 #define ECF_INCL_FRAME_HDR	BIT_11
 
-	__le32	 rx_byte_count;
-	__le32	 tx_byte_count;
+	union {
+		struct {
+			__le32	 rx_byte_count;
+			__le32	 tx_byte_count;
 
-	__le64	 tx_address __packed;	/* Data segment 0 address. */
-	__le32	 tx_len;		/* Data segment 0 length. */
-	__le64	 rx_address __packed;	/* Data segment 1 address. */
-	__le32	 rx_len;		/* Data segment 1 length. */
+			__le64	 tx_address __packed;	/* DSD 0 address. */
+			__le32	 tx_len;		/* DSD 0 length. */
+
+			__le64	 rx_address __packed;	/* DSD 1 address. */
+			__le32	 rx_len;		/* DSD 1 length. */
+		};
+		struct {
+			uint32_t total_byte_count;
+			uint32_t error_subcode_1;
+			uint32_t error_subcode_2;
+			uint32_t error_subcode_3;
+		};
+	};
 };
 
 struct els_sts_entry_24xx {
@@ -793,15 +848,16 @@ struct els_sts_entry_24xx {
 	uint8_t opcode;
 	uint8_t reserved_3;
 
-	uint8_t port_id[3];
-	uint8_t reserved_4;
-
-	uint16_t reserved_5;
+	uint8_t d_id[3];
+	uint8_t s_id[3];
 
 	uint16_t control_flags;		/* Control flags. */
 	uint32_t total_byte_count;
 	uint32_t error_subcode_1;
 	uint32_t error_subcode_2;
+	uint32_t error_subcode_3;
+
+	uint32_t reserved_4[4];
 };
 /*
  * ISP queue - Mailbox Command entry structure definition.
@@ -942,6 +998,91 @@ struct abort_entry_24xx {
 	uint8_t reserved_2[12];
 };
 
+#define ABTS_RCV_TYPE		0x54
+#define ABTS_RSP_TYPE		0x55
+struct abts_entry_24xx {
+	uint8_t entry_type;
+	uint8_t entry_count;
+	uint8_t handle_count;
+	uint8_t entry_status;
+
+	uint32_t handle;		/* type 0x55 only */
+
+	uint16_t comp_status;		/* type 0x55 only */
+	uint16_t nport_handle;		/* type 0x54 only */
+
+	uint16_t control_flags;		/* type 0x55 only */
+	uint8_t vp_idx;
+	uint8_t sof_type;		/* sof_type is upper nibble */
+
+	uint32_t rx_xch_addr;
+
+	uint8_t d_id[3];
+	uint8_t r_ctl;
+
+	uint8_t s_id[3];
+	uint8_t cs_ctl;
+
+	uint8_t f_ctl[3];
+	uint8_t type;
+
+	uint16_t seq_cnt;
+	uint8_t df_ctl;
+	uint8_t seq_id;
+
+	uint16_t rx_id;
+	uint16_t ox_id;
+
+	uint32_t param;
+
+	union {
+		struct {
+			uint32_t subcode3;
+			uint32_t rsvd;
+			uint32_t subcode1;
+			uint32_t subcode2;
+		} error;
+		struct {
+			uint16_t rsrvd1;
+			uint8_t last_seq_id;
+			uint8_t seq_id_valid;
+			uint16_t aborted_rx_id;
+			uint16_t aborted_ox_id;
+			uint16_t high_seq_cnt;
+			uint16_t low_seq_cnt;
+		} ba_acc;
+		struct {
+			uint8_t vendor_unique;
+			uint8_t explanation;
+			uint8_t reason;
+		} ba_rjt;
+	} payload;
+
+	uint32_t rx_xch_addr_to_abort;
+} __packed;
+
+/* ABTS payload explanation values */
+#define BA_RJT_EXP_NO_ADDITIONAL	0
+#define BA_RJT_EXP_INV_OX_RX_ID		3
+#define BA_RJT_EXP_SEQ_ABORTED		5
+
+/* ABTS payload reason values */
+#define BA_RJT_RSN_INV_CMD_CODE		1
+#define BA_RJT_RSN_LOGICAL_ERROR	3
+#define BA_RJT_RSN_LOGICAL_BUSY		5
+#define BA_RJT_RSN_PROTOCOL_ERROR	7
+#define BA_RJT_RSN_UNABLE_TO_PERFORM	9
+#define BA_RJT_RSN_VENDOR_SPECIFIC	0xff
+
+/* FC_F values */
+#define FC_TYPE_BLD		0x000		/* Basic link data */
+#define FC_F_CTL_RSP_CNTXT	0x800000	/* Responder of exchange */
+#define FC_F_CTL_LAST_SEQ	0x100000	/* Last sequence */
+#define FC_F_CTL_END_SEQ	0x80000		/* Last sequence */
+#define FC_F_CTL_SEQ_INIT	0x010000	/* Sequence initiative */
+#define FC_ROUTING_BLD		0x80		/* Basic link data frame */
+#define FC_R_CTL_BLD_BA_ACC	0x04		/* BA_ACC (basic accept) */
+
 /*
  * ISP I/O Register Set structure definitions.
  */
@@ -1726,9 +1867,8 @@ struct access_chip_rsp_84xx {
 
 /* LR Distance bit positions */
 #define LR_DIST_NV_POS		2
+#define LR_DIST_NV_MASK		0xf
 #define LR_DIST_FW_POS		12
-#define LR_DIST_FW_SHIFT	(LR_DIST_FW_POS - LR_DIST_NV_POS)
-#define LR_DIST_FW_FIELD(x)	((x) << LR_DIST_FW_SHIFT & 0xf000)
 
 /* FAC semaphore defines */
 #define FAC_SEMAPHORE_UNLOCK    0
@@ -1883,6 +2023,7 @@ struct nvram_81xx {
 	 * BIT 6-15 = Unused
 	 */
 	uint16_t enhanced_features;
+
 	uint16_t reserved_24[4];
 
 	/* Offset 416. */
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 2a64729..1b93f5b 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -31,7 +31,7 @@ extern int qla24xx_nvram_config(struct scsi_qla_host *);
 extern int qla81xx_nvram_config(struct scsi_qla_host *);
 extern void qla2x00_update_fw_options(struct scsi_qla_host *);
 extern void qla24xx_update_fw_options(scsi_qla_host_t *);
-extern void qla81xx_update_fw_options(scsi_qla_host_t *);
+
 extern int qla2x00_load_risc(struct scsi_qla_host *, uint32_t *);
 extern int qla24xx_load_risc(scsi_qla_host_t *, uint32_t *);
 extern int qla81xx_load_risc(scsi_qla_host_t *, uint32_t *);
@@ -109,7 +109,7 @@ int qla24xx_async_notify_ack(scsi_qla_host_t *, fc_port_t *,
 int qla24xx_post_newsess_work(struct scsi_qla_host *, port_id_t *, u8 *, u8*,
     void *, u8);
 int qla24xx_fcport_handle_login(struct scsi_qla_host *, fc_port_t *);
-int qla24xx_detect_sfp(scsi_qla_host_t *vha);
+int qla24xx_detect_sfp(scsi_qla_host_t *);
 int qla24xx_post_gpdb_work(struct scsi_qla_host *, fc_port_t *, u8);
 
 extern void qla28xx_get_aux_images(struct scsi_qla_host *,
@@ -142,6 +142,8 @@ extern int qlport_down_retry;
 extern int ql2xplogiabsentdevice;
 extern int ql2xloginretrycount;
 extern int ql2xfdmienable;
+extern int ql2xrdpenable;
+extern int ql2xsmartsan;
 extern int ql2xallocfwdump;
 extern int ql2xextended_error_logging;
 extern int ql2xiidmaenable;
@@ -226,6 +228,7 @@ void qla2x00_handle_login_done_event(struct scsi_qla_host *, fc_port_t *,
 int qla24xx_post_gnl_work(struct scsi_qla_host *, fc_port_t *);
 int qla24xx_post_relogin_work(struct scsi_qla_host *vha);
 void qla2x00_wait_for_sess_deletion(scsi_qla_host_t *);
+void qla24xx_process_purex_rdp(struct scsi_qla_host *vha, void *pkt);
 
 /*
  * Global Functions in qla_mid.c source file.
@@ -354,6 +357,9 @@ extern int
 qla2x00_get_port_database(scsi_qla_host_t *, fc_port_t *, uint8_t);
 
 extern int
+qla24xx_get_port_database(scsi_qla_host_t *, u16, struct port_database_24xx *);
+
+extern int
 qla2x00_get_firmware_state(scsi_qla_host_t *, uint16_t *);
 
 extern int
@@ -452,6 +458,13 @@ extern int
 qla25xx_set_driver_version(scsi_qla_host_t *, char *);
 
 extern int
+qla25xx_set_els_cmds_supported(scsi_qla_host_t *);
+
+extern int
+qla24xx_get_buffer_credits(scsi_qla_host_t *, struct buffer_credit_24xx *,
+	dma_addr_t);
+
+extern int
 qla2x00_read_sfp(scsi_qla_host_t *, dma_addr_t, uint8_t *,
 	uint16_t, uint16_t, uint16_t, uint16_t);
 
@@ -552,6 +565,8 @@ qla2x00_process_completed_request(struct scsi_qla_host *, struct req_que *,
 	uint32_t);
 extern irqreturn_t
 qla2xxx_msix_rsp_q(int irq, void *dev_id);
+extern irqreturn_t
+qla2xxx_msix_rsp_q_hs(int irq, void *dev_id);
 fc_port_t *qla2x00_find_fcport_by_loopid(scsi_qla_host_t *, uint16_t);
 fc_port_t *qla2x00_find_fcport_by_wwpn(scsi_qla_host_t *, u8 *, u8);
 fc_port_t *qla2x00_find_fcport_by_nportid(scsi_qla_host_t *, port_id_t *, u8);
@@ -656,7 +671,7 @@ extern void *qla24xx_prep_ms_fdmi_iocb(scsi_qla_host_t *, uint32_t, uint32_t);
 extern int qla2x00_fdmi_register(scsi_qla_host_t *);
 extern int qla2x00_gfpn_id(scsi_qla_host_t *, sw_info_t *);
 extern int qla2x00_gpsc(scsi_qla_host_t *, sw_info_t *);
-extern void qla2x00_get_sym_node_name(scsi_qla_host_t *, uint8_t *, size_t);
+extern size_t qla2x00_get_sym_node_name(scsi_qla_host_t *, uint8_t *, size_t);
 extern int qla2x00_chk_ms_status(scsi_qla_host_t *, ms_iocb_entry_t *,
 	struct ct_sns_rsp *, const char *);
 extern void qla2x00_async_iocb_timeout(void *data);
@@ -844,6 +859,7 @@ extern void qla82xx_clear_pending_mbx(scsi_qla_host_t *);
 extern int qla82xx_read_temperature(scsi_qla_host_t *);
 extern int qla8044_read_temperature(scsi_qla_host_t *);
 extern int qla2x00_read_sfp_dev(struct scsi_qla_host *, char *, int);
+extern int ql26xx_led_config(scsi_qla_host_t *, uint16_t, uint16_t *);
 
 /* BSG related functions */
 extern int qla24xx_bsg_request(struct bsg_job *);
@@ -913,6 +929,7 @@ void qlt_remove_target_resources(struct qla_hw_data *);
 void qlt_clr_qp_table(struct scsi_qla_host *vha);
 void qlt_set_mode(struct scsi_qla_host *);
 int qla2x00_set_data_rate(scsi_qla_host_t *vha, uint16_t mode);
+extern void qla24xx_process_purex_list(struct purex_list *);
 
 /* nvme.c */
 void qla_nvme_unregister_remote_port(struct fc_port *fcport);
diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c
index aaa4a5b..42c3ad2 100644
--- a/drivers/scsi/qla2xxx/qla_gs.c
+++ b/drivers/scsi/qla2xxx/qla_gs.c
@@ -19,6 +19,8 @@ static int qla_async_rffid(scsi_qla_host_t *, port_id_t *, u8, u8);
 static int qla_async_rnnid(scsi_qla_host_t *, port_id_t *, u8*);
 static int qla_async_rsnn_nn(scsi_qla_host_t *);
 
+
+
 /**
  * qla2x00_prep_ms_iocb() - Prepare common MS/CT IOCB fields for SNS CT query.
  * @vha: HA context
@@ -844,19 +846,18 @@ static int qla_async_rnnid(scsi_qla_host_t *vha, port_id_t *d_id,
 	return rval;
 }
 
-void
+size_t
 qla2x00_get_sym_node_name(scsi_qla_host_t *vha, uint8_t *snn, size_t size)
 {
 	struct qla_hw_data *ha = vha->hw;
 
 	if (IS_QLAFX00(ha))
-		snprintf(snn, size, "%s FW:v%s DVR:v%s", ha->model_number,
-		    ha->mr.fw_version, qla2x00_version_str);
-	else
-		snprintf(snn, size,
-		    "%s FW:v%d.%02d.%02d DVR:v%s", ha->model_number,
-		    ha->fw_major_version, ha->fw_minor_version,
-		    ha->fw_subminor_version, qla2x00_version_str);
+		return scnprintf(snn, size, "%s FW:v%s DVR:v%s",
+		    ha->model_number, ha->mr.fw_version, qla2x00_version_str);
+
+	return scnprintf(snn, size, "%s FW:v%d.%02d.%02d DVR:v%s",
+	    ha->model_number, ha->fw_major_version, ha->fw_minor_version,
+	    ha->fw_subminor_version, qla2x00_version_str);
 }
 
 /**
@@ -1501,747 +1502,732 @@ qla2x00_prep_ct_fdmi_req(struct ct_sns_pkt *p, uint16_t cmd,
 	return &p->p.req;
 }
 
-/**
- * qla2x00_fdmi_rhba() - perform RHBA FDMI registration
- * @vha: HA context
- *
- * Returns 0 on success.
- */
-static int
-qla2x00_fdmi_rhba(scsi_qla_host_t *vha)
+static uint
+qla25xx_fdmi_port_speed_capability(struct qla_hw_data *ha)
 {
-	int rval, alen;
-	uint32_t size, sn;
-
-	ms_iocb_entry_t *ms_pkt;
-	struct ct_sns_req *ct_req;
-	struct ct_sns_rsp *ct_rsp;
-	void *entries;
-	struct ct_fdmi_hba_attr *eiter;
-	struct qla_hw_data *ha = vha->hw;
-
-	/* Issue RHBA */
-	/* Prepare common MS IOCB */
-	/*   Request size adjusted after CT preparation */
-	ms_pkt = ha->isp_ops->prep_ms_fdmi_iocb(vha, 0, RHBA_RSP_SIZE);
-
-	/* Prepare CT request */
-	ct_req = qla2x00_prep_ct_fdmi_req(ha->ct_sns, RHBA_CMD, RHBA_RSP_SIZE);
-	ct_rsp = &ha->ct_sns->p.rsp;
-
-	/* Prepare FDMI command arguments -- attribute block, attributes. */
-	memcpy(ct_req->req.rhba.hba_identifier, vha->port_name, WWN_SIZE);
-	ct_req->req.rhba.entry_count = cpu_to_be32(1);
-	memcpy(ct_req->req.rhba.port_name, vha->port_name, WWN_SIZE);
-	size = 2 * WWN_SIZE + 4 + 4;
-
-	/* Attributes */
-	ct_req->req.rhba.attrs.count =
-	    cpu_to_be32(FDMI_HBA_ATTR_COUNT);
-	entries = &ct_req->req;
-
-	/* Nodename. */
-	eiter = entries + size;
-	eiter->type = cpu_to_be16(FDMI_HBA_NODE_NAME);
-	eiter->len = cpu_to_be16(4 + WWN_SIZE);
-	memcpy(eiter->a.node_name, vha->node_name, WWN_SIZE);
-	size += 4 + WWN_SIZE;
-
-	ql_dbg(ql_dbg_disc, vha, 0x2025,
-	    "NodeName = %8phN.\n", eiter->a.node_name);
-
-	/* Manufacturer. */
-	eiter = entries + size;
-	eiter->type = cpu_to_be16(FDMI_HBA_MANUFACTURER);
-	alen = strlen(QLA2XXX_MANUFACTURER);
-	snprintf(eiter->a.manufacturer, sizeof(eiter->a.manufacturer),
-	    "%s", "QLogic Corporation");
-	alen += 4 - (alen & 3);
-	eiter->len = cpu_to_be16(4 + alen);
-	size += 4 + alen;
-
-	ql_dbg(ql_dbg_disc, vha, 0x2026,
-	    "Manufacturer = %s.\n", eiter->a.manufacturer);
-
-	/* Serial number. */
-	eiter = entries + size;
-	eiter->type = cpu_to_be16(FDMI_HBA_SERIAL_NUMBER);
-	if (IS_FWI2_CAPABLE(ha))
-		qla2xxx_get_vpd_field(vha, "SN", eiter->a.serial_num,
-		    sizeof(eiter->a.serial_num));
-	else {
-		sn = ((ha->serial0 & 0x1f) << 16) |
-			(ha->serial2 << 8) | ha->serial1;
-		snprintf(eiter->a.serial_num, sizeof(eiter->a.serial_num),
-		    "%c%05d", 'A' + sn / 100000, sn % 100000);
-	}
-	alen = strlen(eiter->a.serial_num);
-	alen += 4 - (alen & 3);
-	eiter->len = cpu_to_be16(4 + alen);
-	size += 4 + alen;
-
-	ql_dbg(ql_dbg_disc, vha, 0x2027,
-	    "Serial no. = %s.\n", eiter->a.serial_num);
-
-	/* Model name. */
-	eiter = entries + size;
-	eiter->type = cpu_to_be16(FDMI_HBA_MODEL);
-	snprintf(eiter->a.model, sizeof(eiter->a.model),
-	    "%s", ha->model_number);
-	alen = strlen(eiter->a.model);
-	alen += 4 - (alen & 3);
-	eiter->len = cpu_to_be16(4 + alen);
-	size += 4 + alen;
-
-	ql_dbg(ql_dbg_disc, vha, 0x2028,
-	    "Model Name = %s.\n", eiter->a.model);
-
-	/* Model description. */
-	eiter = entries + size;
-	eiter->type = cpu_to_be16(FDMI_HBA_MODEL_DESCRIPTION);
-	snprintf(eiter->a.model_desc, sizeof(eiter->a.model_desc),
-	    "%s", ha->model_desc);
-	alen = strlen(eiter->a.model_desc);
-	alen += 4 - (alen & 3);
-	eiter->len = cpu_to_be16(4 + alen);
-	size += 4 + alen;
-
-	ql_dbg(ql_dbg_disc, vha, 0x2029,
-	    "Model Desc = %s.\n", eiter->a.model_desc);
-
-	/* Hardware version. */
-	eiter = entries + size;
-	eiter->type = cpu_to_be16(FDMI_HBA_HARDWARE_VERSION);
-	if (!IS_FWI2_CAPABLE(ha)) {
-		snprintf(eiter->a.hw_version, sizeof(eiter->a.hw_version),
-		    "HW:%s", ha->adapter_id);
-	} else if (qla2xxx_get_vpd_field(vha, "MN", eiter->a.hw_version,
-		    sizeof(eiter->a.hw_version))) {
-		;
-	} else if (qla2xxx_get_vpd_field(vha, "EC", eiter->a.hw_version,
-		    sizeof(eiter->a.hw_version))) {
-		;
-	} else {
-		snprintf(eiter->a.hw_version, sizeof(eiter->a.hw_version),
-		    "HW:%s", ha->adapter_id);
-	}
-	alen = strlen(eiter->a.hw_version);
-	alen += 4 - (alen & 3);
-	eiter->len = cpu_to_be16(4 + alen);
-	size += 4 + alen;
-
-	ql_dbg(ql_dbg_disc, vha, 0x202a,
-	    "Hardware ver = %s.\n", eiter->a.hw_version);
-
-	/* Driver version. */
-	eiter = entries + size;
-	eiter->type = cpu_to_be16(FDMI_HBA_DRIVER_VERSION);
-	snprintf(eiter->a.driver_version, sizeof(eiter->a.driver_version),
-	    "%s", qla2x00_version_str);
-	alen = strlen(eiter->a.driver_version);
-	alen += 4 - (alen & 3);
-	eiter->len = cpu_to_be16(4 + alen);
-	size += 4 + alen;
-
-	ql_dbg(ql_dbg_disc, vha, 0x202b,
-	    "Driver ver = %s.\n", eiter->a.driver_version);
-
-	/* Option ROM version. */
-	eiter = entries + size;
-	eiter->type = cpu_to_be16(FDMI_HBA_OPTION_ROM_VERSION);
-	snprintf(eiter->a.orom_version, sizeof(eiter->a.orom_version),
-	    "%d.%02d", ha->bios_revision[1], ha->bios_revision[0]);
-	alen = strlen(eiter->a.orom_version);
-	alen += 4 - (alen & 3);
-	eiter->len = cpu_to_be16(4 + alen);
-	size += 4 + alen;
-
-	ql_dbg(ql_dbg_disc, vha , 0x202c,
-	    "Optrom vers = %s.\n", eiter->a.orom_version);
-
-	/* Firmware version */
-	eiter = entries + size;
-	eiter->type = cpu_to_be16(FDMI_HBA_FIRMWARE_VERSION);
-	ha->isp_ops->fw_version_str(vha, eiter->a.fw_version,
-	    sizeof(eiter->a.fw_version));
-	alen = strlen(eiter->a.fw_version);
-	alen += 4 - (alen & 3);
-	eiter->len = cpu_to_be16(4 + alen);
-	size += 4 + alen;
-
-	ql_dbg(ql_dbg_disc, vha, 0x202d,
-	    "Firmware vers = %s.\n", eiter->a.fw_version);
-
-	/* Update MS request size. */
-	qla2x00_update_ms_fdmi_iocb(vha, size + 16);
-
-	ql_dbg(ql_dbg_disc, vha, 0x202e,
-	    "RHBA identifier = %8phN size=%d.\n",
-	    ct_req->req.rhba.hba_identifier, size);
-	ql_dump_buffer(ql_dbg_disc + ql_dbg_buffer, vha, 0x2076,
-	    entries, size);
-
-	/* Execute MS IOCB */
-	rval = qla2x00_issue_iocb(vha, ha->ms_iocb, ha->ms_iocb_dma,
-	    sizeof(ms_iocb_entry_t));
-	if (rval != QLA_SUCCESS) {
-		/*EMPTY*/
-		ql_dbg(ql_dbg_disc, vha, 0x2030,
-		    "RHBA issue IOCB failed (%d).\n", rval);
-	} else if (qla2x00_chk_ms_status(vha, ms_pkt, ct_rsp, "RHBA") !=
-	    QLA_SUCCESS) {
-		rval = QLA_FUNCTION_FAILED;
-		if (ct_rsp->header.reason_code == CT_REASON_CANNOT_PERFORM &&
-		    ct_rsp->header.explanation_code ==
-		    CT_EXPL_ALREADY_REGISTERED) {
-			ql_dbg(ql_dbg_disc, vha, 0x2034,
-			    "HBA already registered.\n");
-			rval = QLA_ALREADY_REGISTERED;
-		} else {
-			ql_dbg(ql_dbg_disc, vha, 0x20ad,
-			    "RHBA FDMI registration failed, CT Reason code: 0x%x, CT Explanation 0x%x\n",
-			    ct_rsp->header.reason_code,
-			    ct_rsp->header.explanation_code);
-		}
-	} else {
-		ql_dbg(ql_dbg_disc, vha, 0x2035,
-		    "RHBA exiting normally.\n");
-	}
-
-	return rval;
-}
-
-/**
- * qla2x00_fdmi_rpa() - perform RPA registration
- * @vha: HA context
- *
- * Returns 0 on success.
- */
-static int
-qla2x00_fdmi_rpa(scsi_qla_host_t *vha)
-{
-	int rval, alen;
-	uint32_t size;
-	struct qla_hw_data *ha = vha->hw;
-	ms_iocb_entry_t *ms_pkt;
-	struct ct_sns_req *ct_req;
-	struct ct_sns_rsp *ct_rsp;
-	void *entries;
-	struct ct_fdmi_port_attr *eiter;
-	struct init_cb_24xx *icb24 = (struct init_cb_24xx *)ha->init_cb;
-	struct new_utsname *p_sysid = NULL;
-
-	/* Issue RPA */
-	/* Prepare common MS IOCB */
-	/*   Request size adjusted after CT preparation */
-	ms_pkt = ha->isp_ops->prep_ms_fdmi_iocb(vha, 0, RPA_RSP_SIZE);
-
-	/* Prepare CT request */
-	ct_req = qla2x00_prep_ct_fdmi_req(ha->ct_sns, RPA_CMD,
-	    RPA_RSP_SIZE);
-	ct_rsp = &ha->ct_sns->p.rsp;
-
-	/* Prepare FDMI command arguments -- attribute block, attributes. */
-	memcpy(ct_req->req.rpa.port_name, vha->port_name, WWN_SIZE);
-	size = WWN_SIZE + 4;
-
-	/* Attributes */
-	ct_req->req.rpa.attrs.count = cpu_to_be32(FDMI_PORT_ATTR_COUNT);
-	entries = &ct_req->req;
-
-	/* FC4 types. */
-	eiter = entries + size;
-	eiter->type = cpu_to_be16(FDMI_PORT_FC4_TYPES);
-	eiter->len = cpu_to_be16(4 + 32);
-	eiter->a.fc4_types[2] = 0x01;
-	size += 4 + 32;
-
-	ql_dbg(ql_dbg_disc, vha, 0x2039,
-	    "FC4_TYPES=%02x %02x.\n",
-	    eiter->a.fc4_types[2],
-	    eiter->a.fc4_types[1]);
-
-	/* Supported speed. */
-	eiter = entries + size;
-	eiter->type = cpu_to_be16(FDMI_PORT_SUPPORT_SPEED);
-	eiter->len = cpu_to_be16(4 + 4);
 	if (IS_CNA_CAPABLE(ha))
-		eiter->a.sup_speed = cpu_to_be32(
-		    FDMI_PORT_SPEED_10GB);
-	else if (IS_QLA27XX(ha) || IS_QLA28XX(ha))
-		eiter->a.sup_speed = cpu_to_be32(
-		    FDMI_PORT_SPEED_32GB|
-		    FDMI_PORT_SPEED_16GB|
-		    FDMI_PORT_SPEED_8GB);
-	else if (IS_QLA2031(ha))
-		eiter->a.sup_speed = cpu_to_be32(
-		    FDMI_PORT_SPEED_16GB|
-		    FDMI_PORT_SPEED_8GB|
-		    FDMI_PORT_SPEED_4GB);
-	else if (IS_QLA25XX(ha))
-		eiter->a.sup_speed = cpu_to_be32(
-		    FDMI_PORT_SPEED_8GB|
-		    FDMI_PORT_SPEED_4GB|
-		    FDMI_PORT_SPEED_2GB|
-		    FDMI_PORT_SPEED_1GB);
-	else if (IS_QLA24XX_TYPE(ha))
-		eiter->a.sup_speed = cpu_to_be32(
-		    FDMI_PORT_SPEED_4GB|
-		    FDMI_PORT_SPEED_2GB|
-		    FDMI_PORT_SPEED_1GB);
-	else if (IS_QLA23XX(ha))
-		eiter->a.sup_speed = cpu_to_be32(
-		    FDMI_PORT_SPEED_2GB|
-		    FDMI_PORT_SPEED_1GB);
-	else
-		eiter->a.sup_speed = cpu_to_be32(
-		    FDMI_PORT_SPEED_1GB);
-	size += 4 + 4;
+		return FDMI_PORT_SPEED_10GB;
+	if (IS_QLA28XX(ha) || IS_QLA27XX(ha)) {
+		uint speeds = 0;
 
-	ql_dbg(ql_dbg_disc, vha, 0x203a,
-	    "Supported_Speed=%x.\n", eiter->a.sup_speed);
-
-	/* Current speed. */
-	eiter = entries + size;
-	eiter->type = cpu_to_be16(FDMI_PORT_CURRENT_SPEED);
-	eiter->len = cpu_to_be16(4 + 4);
+		if (ha->max_supported_speed == 2) {
+			if (ha->min_supported_speed <= 6)
+				speeds |= FDMI_PORT_SPEED_64GB;
+		}
+		if (ha->max_supported_speed == 2 ||
+		    ha->max_supported_speed == 1) {
+			if (ha->min_supported_speed <= 5)
+				speeds |= FDMI_PORT_SPEED_32GB;
+		}
+		if (ha->max_supported_speed == 2 ||
+		    ha->max_supported_speed == 1 ||
+		    ha->max_supported_speed == 0) {
+			if (ha->min_supported_speed <= 4)
+				speeds |= FDMI_PORT_SPEED_16GB;
+		}
+		if (ha->max_supported_speed == 1 ||
+		    ha->max_supported_speed == 0) {
+			if (ha->min_supported_speed <= 3)
+				speeds |= FDMI_PORT_SPEED_8GB;
+		}
+		if (ha->max_supported_speed == 0) {
+			if (ha->min_supported_speed <= 2)
+				speeds |= FDMI_PORT_SPEED_4GB;
+		}
+		return speeds;
+	}
+	if (IS_QLA2031(ha))
+		return FDMI_PORT_SPEED_16GB|FDMI_PORT_SPEED_8GB|
+			FDMI_PORT_SPEED_4GB;
+	if (IS_QLA25XX(ha))
+		return FDMI_PORT_SPEED_8GB|FDMI_PORT_SPEED_4GB|
+			FDMI_PORT_SPEED_2GB|FDMI_PORT_SPEED_1GB;
+	if (IS_QLA24XX_TYPE(ha))
+		return FDMI_PORT_SPEED_4GB|FDMI_PORT_SPEED_2GB|
+			FDMI_PORT_SPEED_1GB;
+	if (IS_QLA23XX(ha))
+		return FDMI_PORT_SPEED_2GB|FDMI_PORT_SPEED_1GB;
+	return FDMI_PORT_SPEED_1GB;
+}
+static uint
+qla25xx_fdmi_port_speed_currently(struct qla_hw_data *ha)
+{
 	switch (ha->link_data_rate) {
 	case PORT_SPEED_1GB:
-		eiter->a.cur_speed =
-		    cpu_to_be32(FDMI_PORT_SPEED_1GB);
-		break;
+		return FDMI_PORT_SPEED_1GB;
 	case PORT_SPEED_2GB:
-		eiter->a.cur_speed =
-		    cpu_to_be32(FDMI_PORT_SPEED_2GB);
-		break;
+		return FDMI_PORT_SPEED_2GB;
 	case PORT_SPEED_4GB:
-		eiter->a.cur_speed =
-		    cpu_to_be32(FDMI_PORT_SPEED_4GB);
-		break;
+		return FDMI_PORT_SPEED_4GB;
 	case PORT_SPEED_8GB:
-		eiter->a.cur_speed =
-		    cpu_to_be32(FDMI_PORT_SPEED_8GB);
-		break;
+		return FDMI_PORT_SPEED_8GB;
 	case PORT_SPEED_10GB:
-		eiter->a.cur_speed =
-		    cpu_to_be32(FDMI_PORT_SPEED_10GB);
-		break;
+		return FDMI_PORT_SPEED_10GB;
 	case PORT_SPEED_16GB:
-		eiter->a.cur_speed =
-		    cpu_to_be32(FDMI_PORT_SPEED_16GB);
-		break;
+		return FDMI_PORT_SPEED_16GB;
 	case PORT_SPEED_32GB:
-		eiter->a.cur_speed =
-		    cpu_to_be32(FDMI_PORT_SPEED_32GB);
-		break;
+		return FDMI_PORT_SPEED_32GB;
+	case PORT_SPEED_64GB:
+		return FDMI_PORT_SPEED_64GB;
 	default:
-		eiter->a.cur_speed =
-		    cpu_to_be32(FDMI_PORT_SPEED_UNKNOWN);
-		break;
+		return FDMI_PORT_SPEED_UNKNOWN;
 	}
-	size += 4 + 4;
-
-	ql_dbg(ql_dbg_disc, vha, 0x203b,
-	    "Current_Speed=%x.\n", eiter->a.cur_speed);
-
-	/* Max frame size. */
-	eiter = entries + size;
-	eiter->type = cpu_to_be16(FDMI_PORT_MAX_FRAME_SIZE);
-	eiter->len = cpu_to_be16(4 + 4);
-	eiter->a.max_frame_size = IS_FWI2_CAPABLE(ha) ?
-	    le16_to_cpu(icb24->frame_payload_size) :
-	    le16_to_cpu(ha->init_cb->frame_payload_size);
-	eiter->a.max_frame_size = cpu_to_be32(eiter->a.max_frame_size);
-	size += 4 + 4;
-
-	ql_dbg(ql_dbg_disc, vha, 0x203c,
-	    "Max_Frame_Size=%x.\n", eiter->a.max_frame_size);
-
-	/* OS device name. */
-	eiter = entries + size;
-	eiter->type = cpu_to_be16(FDMI_PORT_OS_DEVICE_NAME);
-	snprintf(eiter->a.os_dev_name, sizeof(eiter->a.os_dev_name),
-	    "%s:host%lu", QLA2XXX_DRIVER_NAME, vha->host_no);
-	alen = strlen(eiter->a.os_dev_name);
-	alen += 4 - (alen & 3);
-	eiter->len = cpu_to_be16(4 + alen);
-	size += 4 + alen;
-
-	ql_dbg(ql_dbg_disc, vha, 0x204b,
-	    "OS_Device_Name=%s.\n", eiter->a.os_dev_name);
-
-	/* Hostname. */
-	eiter = entries + size;
-	eiter->type = cpu_to_be16(FDMI_PORT_HOST_NAME);
-	p_sysid = utsname();
-	if (p_sysid) {
-		snprintf(eiter->a.host_name, sizeof(eiter->a.host_name),
-		    "%s", p_sysid->nodename);
-	} else {
-		snprintf(eiter->a.host_name, sizeof(eiter->a.host_name),
-		    "%s", fc_host_system_hostname(vha->host));
-	}
-	alen = strlen(eiter->a.host_name);
-	alen += 4 - (alen & 3);
-	eiter->len = cpu_to_be16(4 + alen);
-	size += 4 + alen;
-
-	ql_dbg(ql_dbg_disc, vha, 0x203d, "HostName=%s.\n", eiter->a.host_name);
-
-	/* Update MS request size. */
-	qla2x00_update_ms_fdmi_iocb(vha, size + 16);
-
-	ql_dbg(ql_dbg_disc, vha, 0x203e,
-	    "RPA portname  %016llx, size = %d.\n",
-	    wwn_to_u64(ct_req->req.rpa.port_name), size);
-	ql_dump_buffer(ql_dbg_disc + ql_dbg_buffer, vha, 0x2079,
-	    entries, size);
-
-	/* Execute MS IOCB */
-	rval = qla2x00_issue_iocb(vha, ha->ms_iocb, ha->ms_iocb_dma,
-	    sizeof(ms_iocb_entry_t));
-	if (rval != QLA_SUCCESS) {
-		/*EMPTY*/
-		ql_dbg(ql_dbg_disc, vha, 0x2040,
-		    "RPA issue IOCB failed (%d).\n", rval);
-	} else if (qla2x00_chk_ms_status(vha, ms_pkt, ct_rsp, "RPA") !=
-	    QLA_SUCCESS) {
-		rval = QLA_FUNCTION_FAILED;
-		if (ct_rsp->header.reason_code == CT_REASON_CANNOT_PERFORM &&
-		    ct_rsp->header.explanation_code ==
-		    CT_EXPL_ALREADY_REGISTERED) {
-			ql_dbg(ql_dbg_disc, vha, 0x20cd,
-			    "RPA already registered.\n");
-			rval = QLA_ALREADY_REGISTERED;
-		}
-
-	} else {
-		ql_dbg(ql_dbg_disc, vha, 0x2041,
-		    "RPA exiting normally.\n");
-	}
-
-	return rval;
 }
 
 /**
- * qla2x00_fdmiv2_rhba() - perform RHBA FDMI v2 registration
+ * qla2x00_hba_attributes() perform HBA attributes registration
  * @vha: HA context
+ * @entries: number of entries to use
+ * @callopt: Option to issue extended or standard FDMI
+ *           command parameter
  *
  * Returns 0 on success.
  */
-static int
-qla2x00_fdmiv2_rhba(scsi_qla_host_t *vha)
+static unsigned long
+qla2x00_hba_attributes(scsi_qla_host_t *vha, void *entries,
+	unsigned int callopt)
 {
-	int rval, alen;
-	uint32_t size, sn;
-	ms_iocb_entry_t *ms_pkt;
-	struct ct_sns_req *ct_req;
-	struct ct_sns_rsp *ct_rsp;
-	void *entries;
-	struct ct_fdmiv2_hba_attr *eiter;
 	struct qla_hw_data *ha = vha->hw;
-	struct new_utsname *p_sysid = NULL;
-
-	/* Issue RHBA */
-	/* Prepare common MS IOCB */
-	/*   Request size adjusted after CT preparation */
-	ms_pkt = ha->isp_ops->prep_ms_fdmi_iocb(vha, 0, RHBA_RSP_SIZE);
-
-	/* Prepare CT request */
-	ct_req = qla2x00_prep_ct_fdmi_req(ha->ct_sns, RHBA_CMD,
-	    RHBA_RSP_SIZE);
-	ct_rsp = &ha->ct_sns->p.rsp;
-
-	/* Prepare FDMI command arguments -- attribute block, attributes. */
-	memcpy(ct_req->req.rhba2.hba_identifier, vha->port_name, WWN_SIZE);
-	ct_req->req.rhba2.entry_count = cpu_to_be32(1);
-	memcpy(ct_req->req.rhba2.port_name, vha->port_name, WWN_SIZE);
-	size = 2 * WWN_SIZE + 4 + 4;
-
-	/* Attributes */
-	ct_req->req.rhba2.attrs.count = cpu_to_be32(FDMIV2_HBA_ATTR_COUNT);
-	entries = &ct_req->req;
+	struct init_cb_24xx *icb24 = (void *)ha->init_cb;
+	struct new_utsname *p_sysid = utsname();
+	struct ct_fdmi_hba_attr *eiter;
+	uint16_t alen;
+	unsigned long size = 0;
 
 	/* Nodename. */
 	eiter = entries + size;
 	eiter->type = cpu_to_be16(FDMI_HBA_NODE_NAME);
-	eiter->len = cpu_to_be16(4 + WWN_SIZE);
-	memcpy(eiter->a.node_name, vha->node_name, WWN_SIZE);
-	size += 4 + WWN_SIZE;
-
-	ql_dbg(ql_dbg_disc, vha, 0x207d,
-	    "NodeName = %016llx.\n", wwn_to_u64(eiter->a.node_name));
-
+	memcpy(eiter->a.node_name, vha->node_name, sizeof(eiter->a.node_name));
+	alen = sizeof(eiter->a.node_name);
+	alen += FDMI_ATTR_TYPELEN(eiter);
+	eiter->len = cpu_to_be16(alen);
+	size += alen;
+	ql_dbg(ql_dbg_disc, vha, 0x20a0,
+	    "NODENAME = %016llx.\n", wwn_to_u64(eiter->a.node_name));
 	/* Manufacturer. */
 	eiter = entries + size;
 	eiter->type = cpu_to_be16(FDMI_HBA_MANUFACTURER);
-	snprintf(eiter->a.manufacturer, sizeof(eiter->a.manufacturer),
-	    "%s", "QLogic Corporation");
-	eiter->a.manufacturer[strlen("QLogic Corporation")] = '\0';
-	alen = strlen(eiter->a.manufacturer);
-	alen += 4 - (alen & 3);
-	eiter->len = cpu_to_be16(4 + alen);
-	size += 4 + alen;
-
-	ql_dbg(ql_dbg_disc, vha, 0x20a5,
-	    "Manufacturer = %s.\n", eiter->a.manufacturer);
-
+	alen = scnprintf(
+		eiter->a.manufacturer, sizeof(eiter->a.manufacturer),
+		"%s", "QLogic Corporation");
+	alen += FDMI_ATTR_ALIGNMENT(alen);
+	alen += FDMI_ATTR_TYPELEN(eiter);
+	eiter->len = cpu_to_be16(alen);
+	size += alen;
+	ql_dbg(ql_dbg_disc, vha, 0x20a1,
+	    "MANUFACTURER = %s.\n", eiter->a.manufacturer);
 	/* Serial number. */
 	eiter = entries + size;
 	eiter->type = cpu_to_be16(FDMI_HBA_SERIAL_NUMBER);
-	if (IS_FWI2_CAPABLE(ha))
-		qla2xxx_get_vpd_field(vha, "SN", eiter->a.serial_num,
-		    sizeof(eiter->a.serial_num));
-	else {
-		sn = ((ha->serial0 & 0x1f) << 16) |
-			(ha->serial2 << 8) | ha->serial1;
-		snprintf(eiter->a.serial_num, sizeof(eiter->a.serial_num),
-		    "%c%05d", 'A' + sn / 100000, sn % 100000);
+	alen = 0;
+	if (IS_FWI2_CAPABLE(ha)) {
+		alen = qla2xxx_get_vpd_field(vha, "SN",
+		    eiter->a.serial_num, sizeof(eiter->a.serial_num));
 	}
-	alen = strlen(eiter->a.serial_num);
-	alen += 4 - (alen & 3);
-	eiter->len = cpu_to_be16(4 + alen);
-	size += 4 + alen;
-
-	ql_dbg(ql_dbg_disc, vha, 0x20a6,
-	    "Serial no. = %s.\n", eiter->a.serial_num);
-
+	if (!alen) {
+		uint32_t sn = ((ha->serial0 & 0x1f) << 16) |
+			(ha->serial2 << 8) | ha->serial1;
+		alen = scnprintf(
+			eiter->a.serial_num, sizeof(eiter->a.serial_num),
+			"%c%05d", 'A' + sn / 100000, sn % 100000);
+	}
+	alen += FDMI_ATTR_ALIGNMENT(alen);
+	alen += FDMI_ATTR_TYPELEN(eiter);
+	eiter->len = cpu_to_be16(alen);
+	size += alen;
+	ql_dbg(ql_dbg_disc, vha, 0x20a2,
+	    "SERIAL NUMBER = %s.\n", eiter->a.serial_num);
 	/* Model name. */
 	eiter = entries + size;
 	eiter->type = cpu_to_be16(FDMI_HBA_MODEL);
-	snprintf(eiter->a.model, sizeof(eiter->a.model),
-	    "%s", ha->model_number);
-	alen = strlen(eiter->a.model);
-	alen += 4 - (alen & 3);
-	eiter->len = cpu_to_be16(4 + alen);
-	size += 4 + alen;
-
-	ql_dbg(ql_dbg_disc, vha, 0x20a7,
-	    "Model Name = %s.\n", eiter->a.model);
-
+	alen = scnprintf(
+		eiter->a.model, sizeof(eiter->a.model),
+		"%s", ha->model_number);
+	alen += FDMI_ATTR_ALIGNMENT(alen);
+	alen += FDMI_ATTR_TYPELEN(eiter);
+	eiter->len = cpu_to_be16(alen);
+	size += alen;
+	ql_dbg(ql_dbg_disc, vha, 0x20a3,
+	    "MODEL NAME = %s.\n", eiter->a.model);
 	/* Model description. */
 	eiter = entries + size;
 	eiter->type = cpu_to_be16(FDMI_HBA_MODEL_DESCRIPTION);
-	snprintf(eiter->a.model_desc, sizeof(eiter->a.model_desc),
-	    "%s", ha->model_desc);
-	alen = strlen(eiter->a.model_desc);
-	alen += 4 - (alen & 3);
-	eiter->len = cpu_to_be16(4 + alen);
-	size += 4 + alen;
-
-	ql_dbg(ql_dbg_disc, vha, 0x20a8,
-	    "Model Desc = %s.\n", eiter->a.model_desc);
-
+	alen = scnprintf(
+		eiter->a.model_desc, sizeof(eiter->a.model_desc),
+		"%s", ha->model_desc);
+	alen += FDMI_ATTR_ALIGNMENT(alen);
+	alen += FDMI_ATTR_TYPELEN(eiter);
+	eiter->len = cpu_to_be16(alen);
+	size += alen;
+	ql_dbg(ql_dbg_disc, vha, 0x20a4,
+	    "MODEL DESCRIPTION = %s.\n", eiter->a.model_desc);
 	/* Hardware version. */
 	eiter = entries + size;
 	eiter->type = cpu_to_be16(FDMI_HBA_HARDWARE_VERSION);
-	if (!IS_FWI2_CAPABLE(ha)) {
-		snprintf(eiter->a.hw_version, sizeof(eiter->a.hw_version),
-		    "HW:%s", ha->adapter_id);
-	} else if (qla2xxx_get_vpd_field(vha, "MN", eiter->a.hw_version,
-		    sizeof(eiter->a.hw_version))) {
-		;
-	} else if (qla2xxx_get_vpd_field(vha, "EC", eiter->a.hw_version,
-		    sizeof(eiter->a.hw_version))) {
-		;
-	} else {
-		snprintf(eiter->a.hw_version, sizeof(eiter->a.hw_version),
-		    "HW:%s", ha->adapter_id);
+	alen = 0;
+	if (IS_FWI2_CAPABLE(ha)) {
+		if (!alen) {
+			alen = qla2xxx_get_vpd_field(vha, "MN",
+			    eiter->a.hw_version, sizeof(eiter->a.hw_version));
+		}
+		if (!alen) {
+			alen = qla2xxx_get_vpd_field(vha, "EC",
+			    eiter->a.hw_version, sizeof(eiter->a.hw_version));
+		}
 	}
-	alen = strlen(eiter->a.hw_version);
-	alen += 4 - (alen & 3);
-	eiter->len = cpu_to_be16(4 + alen);
-	size += 4 + alen;
-
-	ql_dbg(ql_dbg_disc, vha, 0x20a9,
-	    "Hardware ver = %s.\n", eiter->a.hw_version);
-
+	if (!alen) {
+		alen = scnprintf(
+			eiter->a.hw_version, sizeof(eiter->a.hw_version),
+			"HW:%s", ha->adapter_id);
+	}
+	alen += FDMI_ATTR_ALIGNMENT(alen);
+	alen += FDMI_ATTR_TYPELEN(eiter);
+	eiter->len = cpu_to_be16(alen);
+	size += alen;
+	ql_dbg(ql_dbg_disc, vha, 0x20a5,
+	    "HARDWARE VERSION = %s.\n", eiter->a.hw_version);
 	/* Driver version. */
 	eiter = entries + size;
 	eiter->type = cpu_to_be16(FDMI_HBA_DRIVER_VERSION);
-	snprintf(eiter->a.driver_version, sizeof(eiter->a.driver_version),
-	    "%s", qla2x00_version_str);
-	alen = strlen(eiter->a.driver_version);
-	alen += 4 - (alen & 3);
-	eiter->len = cpu_to_be16(4 + alen);
-	size += 4 + alen;
-
-	ql_dbg(ql_dbg_disc, vha, 0x20aa,
-	    "Driver ver = %s.\n", eiter->a.driver_version);
-
+	alen = scnprintf(
+		eiter->a.driver_version, sizeof(eiter->a.driver_version),
+		"%s", qla2x00_version_str);
+	alen += FDMI_ATTR_ALIGNMENT(alen);
+	alen += FDMI_ATTR_TYPELEN(eiter);
+	eiter->len = cpu_to_be16(alen);
+	size += alen;
+	ql_dbg(ql_dbg_disc, vha, 0x20a6,
+	    "DRIVER VERSION = %s.\n", eiter->a.driver_version);
 	/* Option ROM version. */
 	eiter = entries + size;
 	eiter->type = cpu_to_be16(FDMI_HBA_OPTION_ROM_VERSION);
-	snprintf(eiter->a.orom_version, sizeof(eiter->a.orom_version),
-	    "%d.%02d", ha->bios_revision[1], ha->bios_revision[0]);
-	alen = strlen(eiter->a.orom_version);
-	alen += 4 - (alen & 3);
-	eiter->len = cpu_to_be16(4 + alen);
-	size += 4 + alen;
+	alen = scnprintf(
+		eiter->a.orom_version, sizeof(eiter->a.orom_version),
+		"%d.%02d", ha->bios_revision[1], ha->bios_revision[0]);
+	alen += FDMI_ATTR_ALIGNMENT(alen);
+	alen += FDMI_ATTR_TYPELEN(eiter);
+	eiter->len = cpu_to_be16(alen);
+	size += alen;
 
-	ql_dbg(ql_dbg_disc, vha , 0x20ab,
-	    "Optrom version = %d.%02d.\n", eiter->a.orom_version[1],
-	    eiter->a.orom_version[0]);
-
+	ql_dbg(ql_dbg_disc, vha, 0x20a7,
+	    "OPTROM VERSION = %d.%02d.\n",
+	    eiter->a.orom_version[1], eiter->a.orom_version[0]);
 	/* Firmware version */
 	eiter = entries + size;
 	eiter->type = cpu_to_be16(FDMI_HBA_FIRMWARE_VERSION);
 	ha->isp_ops->fw_version_str(vha, eiter->a.fw_version,
 	    sizeof(eiter->a.fw_version));
-	alen = strlen(eiter->a.fw_version);
-	alen += 4 - (alen & 3);
-	eiter->len = cpu_to_be16(4 + alen);
-	size += 4 + alen;
-
-	ql_dbg(ql_dbg_disc, vha, 0x20ac,
-	    "Firmware vers = %s.\n", eiter->a.fw_version);
-
+	alen += FDMI_ATTR_ALIGNMENT(alen);
+	alen += FDMI_ATTR_TYPELEN(eiter);
+	eiter->len = cpu_to_be16(alen);
+	size += alen;
+	ql_dbg(ql_dbg_disc, vha, 0x20a8,
+	    "FIRMWARE VERSION = %s.\n", eiter->a.fw_version);
+	if (callopt == CALLOPT_FDMI1)
+		goto done;
 	/* OS Name and Version */
 	eiter = entries + size;
 	eiter->type = cpu_to_be16(FDMI_HBA_OS_NAME_AND_VERSION);
-	p_sysid = utsname();
+	alen = 0;
 	if (p_sysid) {
-		snprintf(eiter->a.os_version, sizeof(eiter->a.os_version),
-		    "%s %s %s",
-		    p_sysid->sysname, p_sysid->release, p_sysid->version);
-	} else {
-		snprintf(eiter->a.os_version, sizeof(eiter->a.os_version),
-		    "%s %s", "Linux", fc_host_system_hostname(vha->host));
+		alen = scnprintf(
+			eiter->a.os_version, sizeof(eiter->a.os_version),
+			"%s %s %s",
+			p_sysid->sysname, p_sysid->release, p_sysid->machine);
 	}
-	alen = strlen(eiter->a.os_version);
-	alen += 4 - (alen & 3);
-	eiter->len = cpu_to_be16(4 + alen);
-	size += 4 + alen;
-
-	ql_dbg(ql_dbg_disc, vha, 0x20ae,
-	    "OS Name and Version = %s.\n", eiter->a.os_version);
-
+	if (!alen) {
+		alen = scnprintf(
+			eiter->a.os_version, sizeof(eiter->a.os_version),
+			"%s %s",
+			"Linux", fc_host_system_hostname(vha->host));
+	}
+	alen += FDMI_ATTR_ALIGNMENT(alen);
+	alen += FDMI_ATTR_TYPELEN(eiter);
+	eiter->len = cpu_to_be16(alen);
+	size += alen;
+	ql_dbg(ql_dbg_disc, vha, 0x20a9,
+	    "OS VERSION = %s.\n", eiter->a.os_version);
 	/* MAX CT Payload Length */
 	eiter = entries + size;
 	eiter->type = cpu_to_be16(FDMI_HBA_MAXIMUM_CT_PAYLOAD_LENGTH);
-	eiter->a.max_ct_len = cpu_to_be32(ha->frame_payload_size);
-	eiter->a.max_ct_len = cpu_to_be32(eiter->a.max_ct_len);
-	eiter->len = cpu_to_be16(4 + 4);
-	size += 4 + 4;
-
-	ql_dbg(ql_dbg_disc, vha, 0x20af,
-	    "CT Payload Length = 0x%x.\n", eiter->a.max_ct_len);
-
+	eiter->a.max_ct_len = cpu_to_be32(le16_to_cpu(IS_FWI2_CAPABLE(ha) ?
+		icb24->frame_payload_size : ha->init_cb->frame_payload_size));
+	alen = sizeof(eiter->a.max_ct_len);
+	alen += FDMI_ATTR_TYPELEN(eiter);
+	eiter->len = cpu_to_be16(alen);
+	size += alen;
+	ql_dbg(ql_dbg_disc, vha, 0x20aa,
+	    "CT PAYLOAD LENGTH = 0x%x.\n", be32_to_cpu(eiter->a.max_ct_len));
 	/* Node Sybolic Name */
 	eiter = entries + size;
 	eiter->type = cpu_to_be16(FDMI_HBA_NODE_SYMBOLIC_NAME);
-	qla2x00_get_sym_node_name(vha, eiter->a.sym_name,
+	alen = qla2x00_get_sym_node_name(vha, eiter->a.sym_name,
 	    sizeof(eiter->a.sym_name));
-	alen = strlen(eiter->a.sym_name);
-	alen += 4 - (alen & 3);
-	eiter->len = cpu_to_be16(4 + alen);
-	size += 4 + alen;
-
-	ql_dbg(ql_dbg_disc, vha, 0x20b0,
-	    "Symbolic Name = %s.\n", eiter->a.sym_name);
-
-	/* Vendor Id */
+	alen += FDMI_ATTR_ALIGNMENT(alen);
+	alen += FDMI_ATTR_TYPELEN(eiter);
+	eiter->len = cpu_to_be16(alen);
+	size += alen;
+	ql_dbg(ql_dbg_disc, vha, 0x20ab,
+	    "SYMBOLIC NAME = %s.\n", eiter->a.sym_name);
+	/* Vendor Specific information */
 	eiter = entries + size;
-	eiter->type = cpu_to_be16(FDMI_HBA_VENDOR_ID);
-	eiter->a.vendor_id = cpu_to_be32(0x1077);
-	eiter->len = cpu_to_be16(4 + 4);
-	size += 4 + 4;
-
-	ql_dbg(ql_dbg_disc, vha, 0x20b1,
-	    "Vendor Id = %x.\n", eiter->a.vendor_id);
-
+	eiter->type = cpu_to_be16(FDMI_HBA_VENDOR_SPECIFIC_INFO);
+	eiter->a.vendor_specific_info = cpu_to_be32(PCI_VENDOR_ID_QLOGIC);
+	alen = sizeof(eiter->a.vendor_specific_info);
+	alen += FDMI_ATTR_TYPELEN(eiter);
+	eiter->len = cpu_to_be16(alen);
+	size += alen;
+	ql_dbg(ql_dbg_disc, vha, 0x20ac,
+	    "VENDOR SPECIFIC INFO = 0x%x.\n",
+	    be32_to_cpu(eiter->a.vendor_specific_info));
 	/* Num Ports */
 	eiter = entries + size;
 	eiter->type = cpu_to_be16(FDMI_HBA_NUM_PORTS);
 	eiter->a.num_ports = cpu_to_be32(1);
-	eiter->len = cpu_to_be16(4 + 4);
-	size += 4 + 4;
-
-	ql_dbg(ql_dbg_disc, vha, 0x20b2,
-	    "Port Num = %x.\n", eiter->a.num_ports);
-
+	alen = sizeof(eiter->a.num_ports);
+	alen += FDMI_ATTR_TYPELEN(eiter);
+	eiter->len = cpu_to_be16(alen);
+	size += alen;
+	ql_dbg(ql_dbg_disc, vha, 0x20ad,
+	    "PORT COUNT = %x.\n", be32_to_cpu(eiter->a.num_ports));
 	/* Fabric Name */
 	eiter = entries + size;
 	eiter->type = cpu_to_be16(FDMI_HBA_FABRIC_NAME);
-	memcpy(eiter->a.fabric_name, vha->fabric_node_name, WWN_SIZE);
-	eiter->len = cpu_to_be16(4 + WWN_SIZE);
-	size += 4 + WWN_SIZE;
-
-	ql_dbg(ql_dbg_disc, vha, 0x20b3,
-	    "Fabric Name = %016llx.\n", wwn_to_u64(eiter->a.fabric_name));
-
+	memcpy(eiter->a.fabric_name, vha->fabric_node_name,
+	    sizeof(eiter->a.fabric_name));
+	alen = sizeof(eiter->a.fabric_name);
+	alen += FDMI_ATTR_TYPELEN(eiter);
+	eiter->len = cpu_to_be16(alen);
+	size += alen;
+	ql_dbg(ql_dbg_disc, vha, 0x20ae,
+	    "FABRIC NAME = %016llx.\n", wwn_to_u64(eiter->a.fabric_name));
 	/* BIOS Version */
 	eiter = entries + size;
 	eiter->type = cpu_to_be16(FDMI_HBA_BOOT_BIOS_NAME);
-	snprintf(eiter->a.bios_name, sizeof(eiter->a.bios_name),
-	    "BIOS %d.%02d", ha->bios_revision[1], ha->bios_revision[0]);
-	alen = strlen(eiter->a.bios_name);
-	alen += 4 - (alen & 3);
-	eiter->len = cpu_to_be16(4 + alen);
-	size += 4 + alen;
-
-	ql_dbg(ql_dbg_disc, vha, 0x20b4,
-	    "BIOS Name = %s\n", eiter->a.bios_name);
-
+	alen = scnprintf(
+		eiter->a.bios_name, sizeof(eiter->a.bios_name),
+		"BIOS %d.%02d", ha->bios_revision[1], ha->bios_revision[0]);
+	alen += FDMI_ATTR_ALIGNMENT(alen);
+	alen += FDMI_ATTR_TYPELEN(eiter);
+	eiter->len = cpu_to_be16(alen);
+	size += alen;
+	ql_dbg(ql_dbg_disc, vha, 0x20af,
+	    "BIOS NAME = %s\n", eiter->a.bios_name);
 	/* Vendor Identifier */
 	eiter = entries + size;
-	eiter->type = cpu_to_be16(FDMI_HBA_TYPE_VENDOR_IDENTIFIER);
-	snprintf(eiter->a.vendor_identifier, sizeof(eiter->a.vendor_identifier),
-	    "%s", "QLGC");
-	alen = strlen(eiter->a.vendor_identifier);
-	alen += 4 - (alen & 3);
-	eiter->len = cpu_to_be16(4 + alen);
-	size += 4 + alen;
+	eiter->type = cpu_to_be16(FDMI_HBA_VENDOR_IDENTIFIER);
+	alen = scnprintf(
+		eiter->a.vendor_identifier, sizeof(eiter->a.vendor_identifier),
+		"%s", "QLGC");
+	alen += FDMI_ATTR_ALIGNMENT(alen);
+	alen += FDMI_ATTR_TYPELEN(eiter);
+	eiter->len = cpu_to_be16(alen);
+	size += alen;
+	ql_dbg(ql_dbg_disc, vha, 0x20b0,
+	    "VENDOR IDENTIFIER = %s.\n", eiter->a.vendor_identifier);
+done:
+	return size;
+}
 
-	ql_dbg(ql_dbg_disc, vha, 0x201b,
-	    "Vendor Identifier = %s.\n", eiter->a.vendor_identifier);
+/**
+ * qla2x00_port_attributes() perform Port attributes registration
+ * @vha: HA context
+ * @entries: number of entries to use
+ * @callopt: Option to issue extended or standard FDMI
+ *           command parameter
+ *
+ * Returns 0 on success.
+ */
+static unsigned long
+qla2x00_port_attributes(scsi_qla_host_t *vha, void *entries,
+	unsigned int callopt)
+{
+	struct qla_hw_data *ha = vha->hw;
+	struct init_cb_24xx *icb24 = (void *)ha->init_cb;
+	struct new_utsname *p_sysid = utsname();
+	char *hostname = p_sysid ?
+		p_sysid->nodename : fc_host_system_hostname(vha->host);
+	struct ct_fdmi_port_attr *eiter;
+	uint16_t alen;
+	unsigned long size = 0;
+
+	/* FC4 types. */
+	eiter = entries + size;
+	eiter->type = cpu_to_be16(FDMI_PORT_FC4_TYPES);
+	eiter->a.fc4_types[0] = 0x00;
+	eiter->a.fc4_types[1] = 0x00;
+	eiter->a.fc4_types[2] = 0x01;
+	eiter->a.fc4_types[3] = 0x00;
+	alen = sizeof(eiter->a.fc4_types);
+	alen += FDMI_ATTR_TYPELEN(eiter);
+	eiter->len = cpu_to_be16(alen);
+	size += alen;
+	ql_dbg(ql_dbg_disc, vha, 0x20c0,
+	    "FC4 TYPES = %016llx.\n", *(uint64_t *)eiter->a.fc4_types);
+	if (vha->flags.nvme_enabled) {
+		eiter->a.fc4_types[6] = 1;      /* NVMe type 28h */
+		ql_dbg(ql_dbg_disc, vha, 0x211f,
+		    "NVME FC4 Type = %02x 0x0 0x0 0x0 0x0 0x0.\n",
+		    eiter->a.fc4_types[6]);
+	}
+	/* Supported speed. */
+	eiter = entries + size;
+	eiter->type = cpu_to_be16(FDMI_PORT_SUPPORT_SPEED);
+	eiter->a.sup_speed = cpu_to_be32(
+		qla25xx_fdmi_port_speed_capability(ha));
+	alen = sizeof(eiter->a.sup_speed);
+	alen += FDMI_ATTR_TYPELEN(eiter);
+	eiter->len = cpu_to_be16(alen);
+	size += alen;
+	ql_dbg(ql_dbg_disc, vha, 0x20c1,
+	    "SUPPORTED SPEED = %x.\n", be32_to_cpu(eiter->a.sup_speed));
+	/* Current speed. */
+	eiter = entries + size;
+	eiter->type = cpu_to_be16(FDMI_PORT_CURRENT_SPEED);
+	eiter->a.cur_speed = cpu_to_be32(
+		qla25xx_fdmi_port_speed_currently(ha));
+	alen = sizeof(eiter->a.cur_speed);
+	alen += FDMI_ATTR_TYPELEN(eiter);
+	eiter->len = cpu_to_be16(alen);
+	size += alen;
+	ql_dbg(ql_dbg_disc, vha, 0x20c2,
+	    "CURRENT SPEED = %x.\n", be32_to_cpu(eiter->a.cur_speed));
+	/* Max frame size. */
+	eiter = entries + size;
+	eiter->type = cpu_to_be16(FDMI_PORT_MAX_FRAME_SIZE);
+	eiter->a.max_frame_size = cpu_to_be32(le16_to_cpu(IS_FWI2_CAPABLE(ha) ?
+		icb24->frame_payload_size : ha->init_cb->frame_payload_size));
+	alen = sizeof(eiter->a.max_frame_size);
+	alen += FDMI_ATTR_TYPELEN(eiter);
+	eiter->len = cpu_to_be16(alen);
+	size += alen;
+	ql_dbg(ql_dbg_disc, vha, 0x20c3,
+	    "MAX FRAME SIZE = %x.\n", be32_to_cpu(eiter->a.max_frame_size));
+	/* OS device name. */
+	eiter = entries + size;
+	eiter->type = cpu_to_be16(FDMI_PORT_OS_DEVICE_NAME);
+	alen = scnprintf(
+		eiter->a.os_dev_name, sizeof(eiter->a.os_dev_name),
+		"%s:host%lu", QLA2XXX_DRIVER_NAME, vha->host_no);
+	alen += FDMI_ATTR_ALIGNMENT(alen);
+	alen += FDMI_ATTR_TYPELEN(eiter);
+	eiter->len = cpu_to_be16(alen);
+	size += alen;
+	ql_dbg(ql_dbg_disc, vha, 0x20c4,
+	    "OS DEVICE NAME = %s.\n", eiter->a.os_dev_name);
+	/* Hostname. */
+	eiter = entries + size;
+	eiter->type = cpu_to_be16(FDMI_PORT_HOST_NAME);
+	if (!*hostname || !strncmp(hostname, "(none)", 6))
+		hostname = "Linux-default";
+	alen = scnprintf(
+		eiter->a.host_name, sizeof(eiter->a.host_name),
+		"%s", hostname);
+	alen += FDMI_ATTR_ALIGNMENT(alen);
+	alen += FDMI_ATTR_TYPELEN(eiter);
+	eiter->len = cpu_to_be16(alen);
+	size += alen;
+	ql_dbg(ql_dbg_disc, vha, 0x20c5,
+	    "HOSTNAME = %s.\n", eiter->a.host_name);
+
+	if (callopt == CALLOPT_FDMI1)
+		goto done;
+
+	/* Node Name */
+	eiter = entries + size;
+	eiter->type = cpu_to_be16(FDMI_PORT_NODE_NAME);
+	memcpy(eiter->a.node_name, vha->node_name, sizeof(eiter->a.node_name));
+	alen = sizeof(eiter->a.node_name);
+	alen += FDMI_ATTR_TYPELEN(eiter);
+	eiter->len = cpu_to_be16(alen);
+	size += alen;
+	ql_dbg(ql_dbg_disc, vha, 0x20c6,
+	    "NODENAME = %016llx.\n", wwn_to_u64(eiter->a.node_name));
+
+	/* Port Name */
+	eiter = entries + size;
+	eiter->type = cpu_to_be16(FDMI_PORT_NAME);
+	memcpy(eiter->a.port_name, vha->port_name, sizeof(eiter->a.port_name));
+	alen = sizeof(eiter->a.port_name);
+	alen += FDMI_ATTR_TYPELEN(eiter);
+	eiter->len = cpu_to_be16(alen);
+	size += alen;
+	ql_dbg(ql_dbg_disc, vha, 0x20c7,
+	    "PORTNAME = %016llx.\n", wwn_to_u64(eiter->a.port_name));
+
+	/* Port Symbolic Name */
+	eiter = entries + size;
+	eiter->type = cpu_to_be16(FDMI_PORT_SYM_NAME);
+	alen = qla2x00_get_sym_node_name(vha, eiter->a.port_sym_name,
+	    sizeof(eiter->a.port_sym_name));
+	alen += FDMI_ATTR_ALIGNMENT(alen);
+	alen += FDMI_ATTR_TYPELEN(eiter);
+	eiter->len = cpu_to_be16(alen);
+	size += alen;
+	ql_dbg(ql_dbg_disc, vha, 0x20c8,
+	    "PORT SYMBOLIC NAME = %s\n", eiter->a.port_sym_name);
+
+	/* Port Type */
+	eiter = entries + size;
+	eiter->type = cpu_to_be16(FDMI_PORT_TYPE);
+	eiter->a.port_type = cpu_to_be32(NS_NX_PORT_TYPE);
+	alen = sizeof(eiter->a.port_type);
+	alen += FDMI_ATTR_TYPELEN(eiter);
+	eiter->len = cpu_to_be16(alen);
+	size += alen;
+	ql_dbg(ql_dbg_disc, vha, 0x20c9,
+	    "PORT TYPE = %x.\n", be32_to_cpu(eiter->a.port_type));
+
+	/* Supported Class of Service */
+	eiter = entries + size;
+	eiter->type = cpu_to_be16(FDMI_PORT_SUPP_COS);
+	eiter->a.port_supported_cos = cpu_to_be32(FC_CLASS_3);
+	alen = sizeof(eiter->a.port_supported_cos);
+	alen += FDMI_ATTR_TYPELEN(eiter);
+	eiter->len = cpu_to_be16(alen);
+	size += alen;
+	ql_dbg(ql_dbg_disc, vha, 0x20ca,
+	    "SUPPORTED COS = %08x\n", be32_to_cpu(eiter->a.port_supported_cos));
+
+	/* Port Fabric Name */
+	eiter = entries + size;
+	eiter->type = cpu_to_be16(FDMI_PORT_FABRIC_NAME);
+	memcpy(eiter->a.fabric_name, vha->fabric_node_name,
+	    sizeof(eiter->a.fabric_name));
+	alen = sizeof(eiter->a.fabric_name);
+	alen += FDMI_ATTR_TYPELEN(eiter);
+	eiter->len = cpu_to_be16(alen);
+	size += alen;
+	ql_dbg(ql_dbg_disc, vha, 0x20cb,
+	    "FABRIC NAME = %016llx.\n", wwn_to_u64(eiter->a.fabric_name));
+
+	/* FC4_type */
+	eiter = entries + size;
+	eiter->type = cpu_to_be16(FDMI_PORT_FC4_TYPE);
+	eiter->a.port_fc4_type[0] = 0x00;
+	eiter->a.port_fc4_type[1] = 0x00;
+	eiter->a.port_fc4_type[2] = 0x01;
+	eiter->a.port_fc4_type[3] = 0x00;
+	alen = sizeof(eiter->a.port_fc4_type);
+	alen += FDMI_ATTR_TYPELEN(eiter);
+	eiter->len = cpu_to_be16(alen);
+	size += alen;
+	ql_dbg(ql_dbg_disc, vha, 0x20cc,
+	    "PORT ACTIVE FC4 TYPE = %016llx.\n",
+	    *(uint64_t *)eiter->a.port_fc4_type);
+
+	/* Port State */
+	eiter = entries + size;
+	eiter->type = cpu_to_be16(FDMI_PORT_STATE);
+	eiter->a.port_state = cpu_to_be32(2);
+	alen = sizeof(eiter->a.port_state);
+	alen += FDMI_ATTR_TYPELEN(eiter);
+	eiter->len = cpu_to_be16(alen);
+	size += alen;
+	ql_dbg(ql_dbg_disc, vha, 0x20cd,
+	    "PORT_STATE = %x.\n", be32_to_cpu(eiter->a.port_state));
+
+	/* Number of Ports */
+	eiter = entries + size;
+	eiter->type = cpu_to_be16(FDMI_PORT_COUNT);
+	eiter->a.num_ports = cpu_to_be32(1);
+	alen = sizeof(eiter->a.num_ports);
+	alen += FDMI_ATTR_TYPELEN(eiter);
+	eiter->len = cpu_to_be16(alen);
+	size += alen;
+	ql_dbg(ql_dbg_disc, vha, 0x20ce,
+	    "PORT COUNT = %x.\n", be32_to_cpu(eiter->a.num_ports));
+
+	/* Port Identifier */
+	eiter = entries + size;
+	eiter->type = cpu_to_be16(FDMI_PORT_IDENTIFIER);
+	eiter->a.port_id = cpu_to_be32(vha->d_id.b24);
+	alen = sizeof(eiter->a.port_id);
+	alen += FDMI_ATTR_TYPELEN(eiter);
+	eiter->len = cpu_to_be16(alen);
+	size += alen;
+	ql_dbg(ql_dbg_disc, vha, 0x20cf,
+	    "PORT ID = %x.\n", be32_to_cpu(eiter->a.port_id));
+
+	if (callopt == CALLOPT_FDMI2 || !ql2xsmartsan)
+		goto done;
+
+	/* Smart SAN Service Category (Populate Smart SAN Initiator)*/
+	eiter = entries + size;
+	eiter->type = cpu_to_be16(FDMI_SMARTSAN_SERVICE);
+	alen = scnprintf(
+		eiter->a.smartsan_service, sizeof(eiter->a.smartsan_service),
+		"%s", "Smart SAN Initiator");
+	alen += FDMI_ATTR_ALIGNMENT(alen);
+	alen += FDMI_ATTR_TYPELEN(eiter);
+	eiter->len = cpu_to_be16(alen);
+	size += alen;
+	ql_dbg(ql_dbg_disc, vha, 0x20d0,
+	    "SMARTSAN SERVICE CATEGORY = %s.\n", eiter->a.smartsan_service);
+
+	/* Smart SAN GUID (NWWN+PWWN) */
+	eiter = entries + size;
+	eiter->type = cpu_to_be16(FDMI_SMARTSAN_GUID);
+	memcpy(eiter->a.smartsan_guid, vha->node_name, WWN_SIZE);
+	memcpy(eiter->a.smartsan_guid + WWN_SIZE, vha->port_name, WWN_SIZE);
+	alen = sizeof(eiter->a.smartsan_guid);
+	alen += FDMI_ATTR_TYPELEN(eiter);
+	eiter->len = cpu_to_be16(alen);
+	size += alen;
+	ql_dbg(ql_dbg_disc, vha, 0x20d1,
+	    "Smart SAN GUID = %016llx-%016llx\n",
+	    wwn_to_u64(eiter->a.smartsan_guid),
+	    wwn_to_u64(eiter->a.smartsan_guid + WWN_SIZE));
+
+	/* Smart SAN Version (populate "Smart SAN Version 1.0") */
+	eiter = entries + size;
+	eiter->type = cpu_to_be16(FDMI_SMARTSAN_VERSION);
+	alen = scnprintf(
+		eiter->a.smartsan_version, sizeof(eiter->a.smartsan_version),
+		"%s", "Smart SAN Version 2.0");
+	alen += FDMI_ATTR_ALIGNMENT(alen);
+	alen += FDMI_ATTR_TYPELEN(eiter);
+	eiter->len = cpu_to_be16(alen);
+	size += alen;
+	ql_dbg(ql_dbg_disc, vha, 0x20d2,
+	    "SMARTSAN VERSION = %s\n", eiter->a.smartsan_version);
+
+	/* Smart SAN Product Name (Specify Adapter Model No) */
+	eiter = entries + size;
+	eiter->type = cpu_to_be16(FDMI_SMARTSAN_PROD_NAME);
+	alen = scnprintf(eiter->a.smartsan_prod_name,
+		sizeof(eiter->a.smartsan_prod_name),
+		"ISP%04x", ha->pdev->device);
+	alen += FDMI_ATTR_ALIGNMENT(alen);
+	alen += FDMI_ATTR_TYPELEN(eiter);
+	eiter->len = cpu_to_be16(alen);
+	size += alen;
+	ql_dbg(ql_dbg_disc, vha, 0x20d3,
+	    "SMARTSAN PRODUCT NAME = %s\n", eiter->a.smartsan_prod_name);
+
+	/* Smart SAN Port Info (specify: 1=Physical, 2=NPIV, 3=SRIOV) */
+	eiter = entries + size;
+	eiter->type = cpu_to_be16(FDMI_SMARTSAN_PORT_INFO);
+	eiter->a.smartsan_port_info = cpu_to_be32(vha->vp_idx ? 2 : 1);
+	alen = sizeof(eiter->a.smartsan_port_info);
+	alen += FDMI_ATTR_TYPELEN(eiter);
+	eiter->len = cpu_to_be16(alen);
+	size += alen;
+	ql_dbg(ql_dbg_disc, vha, 0x20d4,
+	    "SMARTSAN PORT INFO = %x\n", eiter->a.smartsan_port_info);
+
+	/* Smart SAN Security Support */
+	eiter = entries + size;
+	eiter->type = cpu_to_be16(FDMI_SMARTSAN_SECURITY_SUPPORT);
+	eiter->a.smartsan_security_support = cpu_to_be32(1);
+	alen = sizeof(eiter->a.smartsan_security_support);
+	alen += FDMI_ATTR_TYPELEN(eiter);
+	eiter->len = cpu_to_be16(alen);
+	size += alen;
+	ql_dbg(ql_dbg_disc, vha, 0x20d6,
+	    "SMARTSAN SECURITY SUPPORT = %d\n",
+	    be32_to_cpu(eiter->a.smartsan_security_support));
+
+done:
+	return size;
+}
+
+/**
+ * qla2x00_fdmi_rhba() - perform RHBA FDMI registration
+ * @vha: HA context
+ * @callopt: Option to issue FDMI registration
+ *
+ * Returns 0 on success.
+ */
+static int
+qla2x00_fdmi_rhba(scsi_qla_host_t *vha, unsigned int callopt)
+{
+	struct qla_hw_data *ha = vha->hw;
+	unsigned long size = 0;
+	unsigned int rval, count;
+	ms_iocb_entry_t *ms_pkt;
+	struct ct_sns_req *ct_req;
+	struct ct_sns_rsp *ct_rsp;
+	void *entries;
+
+	count = callopt != CALLOPT_FDMI1 ?
+	    FDMI2_HBA_ATTR_COUNT : FDMI1_HBA_ATTR_COUNT;
+
+	size = RHBA_RSP_SIZE;
+
+	ql_dbg(ql_dbg_disc, vha, 0x20e0,
+	    "RHBA (callopt=%x count=%u size=%lu).\n", callopt, count, size);
+
+	/*   Request size adjusted after CT preparation */
+	ms_pkt = ha->isp_ops->prep_ms_fdmi_iocb(vha, 0, size);
+
+	/* Prepare CT request */
+	ct_req = qla2x00_prep_ct_fdmi_req(ha->ct_sns, RHBA_CMD, size);
+	ct_rsp = &ha->ct_sns->p.rsp;
+
+	/* Prepare FDMI command entries */
+	memcpy(ct_req->req.rhba.hba_identifier, vha->port_name,
+	    sizeof(ct_req->req.rhba.hba_identifier));
+	size += sizeof(ct_req->req.rhba.hba_identifier);
+
+	ct_req->req.rhba.entry_count = cpu_to_be32(1);
+	size += sizeof(ct_req->req.rhba.entry_count);
+
+	memcpy(ct_req->req.rhba.port_name, vha->port_name,
+	    sizeof(ct_req->req.rhba.port_name));
+	size += sizeof(ct_req->req.rhba.port_name);
+
+	/* Attribute count */
+	ct_req->req.rhba.attrs.count = cpu_to_be32(count);
+	size += sizeof(ct_req->req.rhba.attrs.count);
+
+	/* Attribute block */
+	entries = &ct_req->req.rhba.attrs.entry;
+
+	size += qla2x00_hba_attributes(vha, entries, callopt);
 
 	/* Update MS request size. */
 	qla2x00_update_ms_fdmi_iocb(vha, size + 16);
 
-	ql_dbg(ql_dbg_disc, vha, 0x20b5,
-	    "RHBA identifier = %016llx.\n",
-	    wwn_to_u64(ct_req->req.rhba2.hba_identifier));
-	ql_dump_buffer(ql_dbg_disc + ql_dbg_buffer, vha, 0x20b6,
+	ql_dbg(ql_dbg_disc, vha, 0x20e1,
+	    "RHBA %016llx %016llx.\n",
+	    wwn_to_u64(ct_req->req.rhba.hba_identifier),
+	    wwn_to_u64(ct_req->req.rhba.port_name));
+
+	ql_dump_buffer(ql_dbg_disc + ql_dbg_buffer, vha, 0x20e2,
 	    entries, size);
 
 	/* Execute MS IOCB */
 	rval = qla2x00_issue_iocb(vha, ha->ms_iocb, ha->ms_iocb_dma,
-	    sizeof(ms_iocb_entry_t));
-	if (rval != QLA_SUCCESS) {
-		/*EMPTY*/
-		ql_dbg(ql_dbg_disc, vha, 0x20b7,
-		    "RHBA issue IOCB failed (%d).\n", rval);
-	} else if (qla2x00_chk_ms_status(vha, ms_pkt, ct_rsp, "RHBA") !=
-	    QLA_SUCCESS) {
-		rval = QLA_FUNCTION_FAILED;
+	    sizeof(*ha->ms_iocb));
+	if (rval) {
+		ql_dbg(ql_dbg_disc, vha, 0x20e3,
+		    "RHBA iocb failed (%d).\n", rval);
+		return rval;
+	}
 
+	rval = qla2x00_chk_ms_status(vha, ms_pkt, ct_rsp, "RHBA");
+	if (rval) {
 		if (ct_rsp->header.reason_code == CT_REASON_CANNOT_PERFORM &&
 		    ct_rsp->header.explanation_code ==
 		    CT_EXPL_ALREADY_REGISTERED) {
-			ql_dbg(ql_dbg_disc, vha, 0x20b8,
-			    "HBA already registered.\n");
-			rval = QLA_ALREADY_REGISTERED;
-		} else {
-			ql_dbg(ql_dbg_disc, vha, 0x2016,
-			    "RHBA FDMI v2 failed, CT Reason code: 0x%x, CT Explanation 0x%x\n",
-			    ct_rsp->header.reason_code,
-			    ct_rsp->header.explanation_code);
+			ql_dbg(ql_dbg_disc, vha, 0x20e4,
+			    "RHBA already registered.\n");
+			return QLA_ALREADY_REGISTERED;
 		}
-	} else {
-		ql_dbg(ql_dbg_disc, vha, 0x20b9,
-		    "RHBA FDMI V2 exiting normally.\n");
+
+		ql_dbg(ql_dbg_disc, vha, 0x20e5,
+		    "RHBA failed, CT Reason %#x, CT Explanation %#x\n",
+		    ct_rsp->header.reason_code,
+		    ct_rsp->header.explanation_code);
+		return rval;
 	}
 
+	ql_dbg(ql_dbg_disc, vha, 0x20e6, "RHBA exiting normally.\n");
 	return rval;
 }
 
-/**
- * qla2x00_fdmi_dhba() -
- * @vha: HA context
- *
- * Returns 0 on success.
- */
+
 static int
 qla2x00_fdmi_dhba(scsi_qla_host_t *vha)
 {
@@ -2250,22 +2236,17 @@ qla2x00_fdmi_dhba(scsi_qla_host_t *vha)
 	ms_iocb_entry_t *ms_pkt;
 	struct ct_sns_req *ct_req;
 	struct ct_sns_rsp *ct_rsp;
-
 	/* Issue RPA */
 	/* Prepare common MS IOCB */
 	ms_pkt = ha->isp_ops->prep_ms_fdmi_iocb(vha, DHBA_REQ_SIZE,
 	    DHBA_RSP_SIZE);
-
 	/* Prepare CT request */
 	ct_req = qla2x00_prep_ct_fdmi_req(ha->ct_sns, DHBA_CMD, DHBA_RSP_SIZE);
 	ct_rsp = &ha->ct_sns->p.rsp;
-
 	/* Prepare FDMI command arguments -- portname. */
 	memcpy(ct_req->req.dhba.port_name, vha->port_name, WWN_SIZE);
-
 	ql_dbg(ql_dbg_disc, vha, 0x2036,
 	    "DHBA portname = %8phN.\n", ct_req->req.dhba.port_name);
-
 	/* Execute MS IOCB */
 	rval = qla2x00_issue_iocb(vha, ha->ms_iocb, ha->ms_iocb_dma,
 	    sizeof(ms_iocb_entry_t));
@@ -2280,337 +2261,178 @@ qla2x00_fdmi_dhba(scsi_qla_host_t *vha)
 		ql_dbg(ql_dbg_disc, vha, 0x2038,
 		    "DHBA exiting normally.\n");
 	}
-
 	return rval;
 }
 
 /**
- * qla2x00_fdmiv2_rpa() -
+ * qla2x00_fdmi_rprt() perform RPRT registration
  * @vha: HA context
+ * @callopt: Option to issue extended or standard FDMI
+ *           command parameter
  *
  * Returns 0 on success.
  */
 static int
-qla2x00_fdmiv2_rpa(scsi_qla_host_t *vha)
+qla2x00_fdmi_rprt(scsi_qla_host_t *vha, int callopt)
 {
-	int rval, alen;
-	uint32_t size;
+	struct scsi_qla_host *base_vha = pci_get_drvdata(vha->hw->pdev);
 	struct qla_hw_data *ha = vha->hw;
+	ulong size = 0;
+	uint rval, count;
 	ms_iocb_entry_t *ms_pkt;
 	struct ct_sns_req *ct_req;
 	struct ct_sns_rsp *ct_rsp;
 	void *entries;
-	struct ct_fdmiv2_port_attr *eiter;
-	struct init_cb_24xx *icb24 = (struct init_cb_24xx *)ha->init_cb;
-	struct new_utsname *p_sysid = NULL;
+	count = callopt == CALLOPT_FDMI2_SMARTSAN && ql2xsmartsan ?
+		FDMI2_SMARTSAN_PORT_ATTR_COUNT :
+		callopt != CALLOPT_FDMI1 ?
+		FDMI2_PORT_ATTR_COUNT : FDMI1_PORT_ATTR_COUNT;
 
-	/* Issue RPA */
-	/* Prepare common MS IOCB */
-	/*   Request size adjusted after CT preparation */
-	ms_pkt = ha->isp_ops->prep_ms_fdmi_iocb(vha, 0, RPA_RSP_SIZE);
+	size = RPRT_RSP_SIZE;
+	ql_dbg(ql_dbg_disc, vha, 0x20e8,
+	    "RPRT (callopt=%x count=%u size=%lu).\n", callopt, count, size);
+	/* Request size adjusted after CT preparation */
+	ms_pkt = ha->isp_ops->prep_ms_fdmi_iocb(vha, 0, size);
+	/* Prepare CT request */
+	ct_req = qla2x00_prep_ct_fdmi_req(ha->ct_sns, RPRT_CMD, size);
+	ct_rsp = &ha->ct_sns->p.rsp;
+	/* Prepare FDMI command entries */
+	memcpy(ct_req->req.rprt.hba_identifier, base_vha->port_name,
+	    sizeof(ct_req->req.rprt.hba_identifier));
+	size += sizeof(ct_req->req.rprt.hba_identifier);
+	memcpy(ct_req->req.rprt.port_name, vha->port_name,
+	    sizeof(ct_req->req.rprt.port_name));
+	size += sizeof(ct_req->req.rprt.port_name);
+	/* Attribute count */
+	ct_req->req.rprt.attrs.count = cpu_to_be32(count);
+	size += sizeof(ct_req->req.rprt.attrs.count);
+	/* Attribute block */
+	entries = ct_req->req.rprt.attrs.entry;
+	size += qla2x00_port_attributes(vha, entries, callopt);
+	/* Update MS request size. */
+	qla2x00_update_ms_fdmi_iocb(vha, size + 16);
+	ql_dbg(ql_dbg_disc, vha, 0x20e9,
+	    "RPRT %016llx  %016llx.\n",
+	    wwn_to_u64(ct_req->req.rprt.port_name),
+	    wwn_to_u64(ct_req->req.rprt.port_name));
+	ql_dump_buffer(ql_dbg_disc + ql_dbg_buffer, vha, 0x20ea,
+	    entries, size);
+	/* Execute MS IOCB */
+	rval = qla2x00_issue_iocb(vha, ha->ms_iocb, ha->ms_iocb_dma,
+	    sizeof(*ha->ms_iocb));
+	if (rval) {
+		ql_dbg(ql_dbg_disc, vha, 0x20eb,
+		    "RPRT iocb failed (%d).\n", rval);
+		return rval;
+	}
+	rval = qla2x00_chk_ms_status(vha, ms_pkt, ct_rsp, "RPRT");
+	if (rval) {
+		if (ct_rsp->header.reason_code == CT_REASON_CANNOT_PERFORM &&
+		    ct_rsp->header.explanation_code ==
+		    CT_EXPL_ALREADY_REGISTERED) {
+			ql_dbg(ql_dbg_disc, vha, 0x20ec,
+			    "RPRT already registered.\n");
+			return QLA_ALREADY_REGISTERED;
+		}
+
+		ql_dbg(ql_dbg_disc, vha, 0x20ed,
+		    "RPRT failed, CT Reason code: %#x, CT Explanation %#x\n",
+		    ct_rsp->header.reason_code,
+		    ct_rsp->header.explanation_code);
+		return rval;
+	}
+	ql_dbg(ql_dbg_disc, vha, 0x20ee, "RPRT exiting normally.\n");
+	return rval;
+}
+
+/**
+ * qla2x00_fdmi_rpa() - perform RPA registration
+ * @vha: HA context
+ * @callopt: Option to issue FDMI registration
+ *
+ * Returns 0 on success.
+ */
+static int
+qla2x00_fdmi_rpa(scsi_qla_host_t *vha, uint callopt)
+{
+	struct qla_hw_data *ha = vha->hw;
+	ulong size = 0;
+	uint rval, count;
+	ms_iocb_entry_t *ms_pkt;
+	struct ct_sns_req *ct_req;
+	struct ct_sns_rsp *ct_rsp;
+	void *entries;
+
+	count =
+	    callopt == CALLOPT_FDMI2_SMARTSAN && ql2xsmartsan ?
+		FDMI2_SMARTSAN_PORT_ATTR_COUNT :
+	    callopt != CALLOPT_FDMI1 ?
+		FDMI2_PORT_ATTR_COUNT : FDMI1_PORT_ATTR_COUNT;
+
+	size =
+	    callopt != CALLOPT_FDMI1 ?
+		SMARTSAN_RPA_RSP_SIZE : RPA_RSP_SIZE;
+
+	ql_dbg(ql_dbg_disc, vha, 0x20f0,
+	    "RPA (callopt=%x count=%u size=%lu).\n", callopt, count, size);
+
+	/* Request size adjusted after CT preparation */
+	ms_pkt = ha->isp_ops->prep_ms_fdmi_iocb(vha, 0, size);
 
 	/* Prepare CT request */
-	ct_req = qla2x00_prep_ct_fdmi_req(ha->ct_sns, RPA_CMD, RPA_RSP_SIZE);
+	ct_req = qla2x00_prep_ct_fdmi_req(ha->ct_sns, RPA_CMD, size);
 	ct_rsp = &ha->ct_sns->p.rsp;
 
-	/* Prepare FDMI command arguments -- attribute block, attributes. */
-	memcpy(ct_req->req.rpa2.port_name, vha->port_name, WWN_SIZE);
-	size = WWN_SIZE + 4;
+	/* Prepare FDMI command entries. */
+	memcpy(ct_req->req.rpa.port_name, vha->port_name,
+	    sizeof(ct_req->req.rpa.port_name));
+	size += sizeof(ct_req->req.rpa.port_name);
 
-	/* Attributes */
-	ct_req->req.rpa2.attrs.count = cpu_to_be32(FDMIV2_PORT_ATTR_COUNT);
-	entries = &ct_req->req;
+	/* Attribute count */
+	ct_req->req.rpa.attrs.count = cpu_to_be32(count);
+	size += sizeof(ct_req->req.rpa.attrs.count);
 
-	/* FC4 types. */
-	eiter = entries + size;
-	eiter->type = cpu_to_be16(FDMI_PORT_FC4_TYPES);
-	eiter->len = cpu_to_be16(4 + 32);
-	eiter->a.fc4_types[2] = 0x01;
-	size += 4 + 32;
+	/* Attribute block */
+	entries = ct_req->req.rpa.attrs.entry;
 
-	ql_dbg(ql_dbg_disc, vha, 0x20ba,
-	    "FC4_TYPES=%02x %02x.\n",
-	    eiter->a.fc4_types[2],
-	    eiter->a.fc4_types[1]);
-
-	if (vha->flags.nvme_enabled) {
-		eiter->a.fc4_types[6] = 1;	/* NVMe type 28h */
-		ql_dbg(ql_dbg_disc, vha, 0x211f,
-		    "NVME FC4 Type = %02x 0x0 0x0 0x0 0x0 0x0.\n",
-		    eiter->a.fc4_types[6]);
-	}
-
-	/* Supported speed. */
-	eiter = entries + size;
-	eiter->type = cpu_to_be16(FDMI_PORT_SUPPORT_SPEED);
-	eiter->len = cpu_to_be16(4 + 4);
-	if (IS_CNA_CAPABLE(ha))
-		eiter->a.sup_speed = cpu_to_be32(
-		    FDMI_PORT_SPEED_10GB);
-	else if (IS_QLA27XX(ha) || IS_QLA28XX(ha))
-		eiter->a.sup_speed = cpu_to_be32(
-		    FDMI_PORT_SPEED_32GB|
-		    FDMI_PORT_SPEED_16GB|
-		    FDMI_PORT_SPEED_8GB);
-	else if (IS_QLA2031(ha))
-		eiter->a.sup_speed = cpu_to_be32(
-		    FDMI_PORT_SPEED_16GB|
-		    FDMI_PORT_SPEED_8GB|
-		    FDMI_PORT_SPEED_4GB);
-	else if (IS_QLA25XX(ha))
-		eiter->a.sup_speed = cpu_to_be32(
-		    FDMI_PORT_SPEED_8GB|
-		    FDMI_PORT_SPEED_4GB|
-		    FDMI_PORT_SPEED_2GB|
-		    FDMI_PORT_SPEED_1GB);
-	else if (IS_QLA24XX_TYPE(ha))
-		eiter->a.sup_speed = cpu_to_be32(
-		    FDMI_PORT_SPEED_4GB|
-		    FDMI_PORT_SPEED_2GB|
-		    FDMI_PORT_SPEED_1GB);
-	else if (IS_QLA23XX(ha))
-		eiter->a.sup_speed = cpu_to_be32(
-		    FDMI_PORT_SPEED_2GB|
-		    FDMI_PORT_SPEED_1GB);
-	else
-		eiter->a.sup_speed = cpu_to_be32(
-		    FDMI_PORT_SPEED_1GB);
-	size += 4 + 4;
-
-	ql_dbg(ql_dbg_disc, vha, 0x20bb,
-	    "Supported Port Speed = %x.\n", eiter->a.sup_speed);
-
-	/* Current speed. */
-	eiter = entries + size;
-	eiter->type = cpu_to_be16(FDMI_PORT_CURRENT_SPEED);
-	eiter->len = cpu_to_be16(4 + 4);
-	switch (ha->link_data_rate) {
-	case PORT_SPEED_1GB:
-		eiter->a.cur_speed = cpu_to_be32(FDMI_PORT_SPEED_1GB);
-		break;
-	case PORT_SPEED_2GB:
-		eiter->a.cur_speed = cpu_to_be32(FDMI_PORT_SPEED_2GB);
-		break;
-	case PORT_SPEED_4GB:
-		eiter->a.cur_speed = cpu_to_be32(FDMI_PORT_SPEED_4GB);
-		break;
-	case PORT_SPEED_8GB:
-		eiter->a.cur_speed = cpu_to_be32(FDMI_PORT_SPEED_8GB);
-		break;
-	case PORT_SPEED_10GB:
-		eiter->a.cur_speed = cpu_to_be32(FDMI_PORT_SPEED_10GB);
-		break;
-	case PORT_SPEED_16GB:
-		eiter->a.cur_speed = cpu_to_be32(FDMI_PORT_SPEED_16GB);
-		break;
-	case PORT_SPEED_32GB:
-		eiter->a.cur_speed = cpu_to_be32(FDMI_PORT_SPEED_32GB);
-		break;
-	default:
-		eiter->a.cur_speed = cpu_to_be32(FDMI_PORT_SPEED_UNKNOWN);
-		break;
-	}
-	size += 4 + 4;
-
-	ql_dbg(ql_dbg_disc, vha, 0x2017,
-	    "Current_Speed = %x.\n", eiter->a.cur_speed);
-
-	/* Max frame size. */
-	eiter = entries + size;
-	eiter->type = cpu_to_be16(FDMI_PORT_MAX_FRAME_SIZE);
-	eiter->len = cpu_to_be16(4 + 4);
-	eiter->a.max_frame_size = IS_FWI2_CAPABLE(ha) ?
-	    le16_to_cpu(icb24->frame_payload_size) :
-	    le16_to_cpu(ha->init_cb->frame_payload_size);
-	eiter->a.max_frame_size = cpu_to_be32(eiter->a.max_frame_size);
-	size += 4 + 4;
-
-	ql_dbg(ql_dbg_disc, vha, 0x20bc,
-	    "Max_Frame_Size = %x.\n", eiter->a.max_frame_size);
-
-	/* OS device name. */
-	eiter = entries + size;
-	eiter->type = cpu_to_be16(FDMI_PORT_OS_DEVICE_NAME);
-	alen = strlen(QLA2XXX_DRIVER_NAME);
-	snprintf(eiter->a.os_dev_name, sizeof(eiter->a.os_dev_name),
-	    "%s:host%lu", QLA2XXX_DRIVER_NAME, vha->host_no);
-	alen += 4 - (alen & 3);
-	eiter->len = cpu_to_be16(4 + alen);
-	size += 4 + alen;
-
-	ql_dbg(ql_dbg_disc, vha, 0x20be,
-	    "OS_Device_Name = %s.\n", eiter->a.os_dev_name);
-
-	/* Hostname. */
-	eiter = entries + size;
-	eiter->type = cpu_to_be16(FDMI_PORT_HOST_NAME);
-	p_sysid = utsname();
-	if (p_sysid) {
-		snprintf(eiter->a.host_name, sizeof(eiter->a.host_name),
-		    "%s", p_sysid->nodename);
-	} else {
-		snprintf(eiter->a.host_name, sizeof(eiter->a.host_name),
-		    "%s", fc_host_system_hostname(vha->host));
-	}
-	alen = strlen(eiter->a.host_name);
-	alen += 4 - (alen & 3);
-	eiter->len = cpu_to_be16(4 + alen);
-	size += 4 + alen;
-
-	ql_dbg(ql_dbg_disc, vha, 0x201a,
-	    "HostName=%s.\n", eiter->a.host_name);
-
-	/* Node Name */
-	eiter = entries + size;
-	eiter->type = cpu_to_be16(FDMI_PORT_NODE_NAME);
-	memcpy(eiter->a.node_name, vha->node_name, WWN_SIZE);
-	eiter->len = cpu_to_be16(4 + WWN_SIZE);
-	size += 4 + WWN_SIZE;
-
-	ql_dbg(ql_dbg_disc, vha, 0x20c0,
-	    "Node Name = %016llx.\n", wwn_to_u64(eiter->a.node_name));
-
-	/* Port Name */
-	eiter = entries + size;
-	eiter->type = cpu_to_be16(FDMI_PORT_NAME);
-	memcpy(eiter->a.port_name, vha->port_name, WWN_SIZE);
-	eiter->len = cpu_to_be16(4 + WWN_SIZE);
-	size += 4 + WWN_SIZE;
-
-	ql_dbg(ql_dbg_disc, vha, 0x20c1,
-	    "Port Name = %016llx.\n", wwn_to_u64(eiter->a.port_name));
-
-	/* Port Symbolic Name */
-	eiter = entries + size;
-	eiter->type = cpu_to_be16(FDMI_PORT_SYM_NAME);
-	qla2x00_get_sym_node_name(vha, eiter->a.port_sym_name,
-	    sizeof(eiter->a.port_sym_name));
-	alen = strlen(eiter->a.port_sym_name);
-	alen += 4 - (alen & 3);
-	eiter->len = cpu_to_be16(4 + alen);
-	size += 4 + alen;
-
-	ql_dbg(ql_dbg_disc, vha, 0x20c2,
-	    "port symbolic name = %s\n", eiter->a.port_sym_name);
-
-	/* Port Type */
-	eiter = entries + size;
-	eiter->type = cpu_to_be16(FDMI_PORT_TYPE);
-	eiter->a.port_type = cpu_to_be32(NS_NX_PORT_TYPE);
-	eiter->len = cpu_to_be16(4 + 4);
-	size += 4 + 4;
-
-	ql_dbg(ql_dbg_disc, vha, 0x20c3,
-	    "Port Type = %x.\n", eiter->a.port_type);
-
-	/* Class of Service  */
-	eiter = entries + size;
-	eiter->type = cpu_to_be16(FDMI_PORT_SUPP_COS);
-	eiter->a.port_supported_cos = cpu_to_be32(FC_CLASS_3);
-	eiter->len = cpu_to_be16(4 + 4);
-	size += 4 + 4;
-
-	ql_dbg(ql_dbg_disc, vha, 0x20c4,
-	    "Supported COS = %08x\n", eiter->a.port_supported_cos);
-
-	/* Port Fabric Name */
-	eiter = entries + size;
-	eiter->type = cpu_to_be16(FDMI_PORT_FABRIC_NAME);
-	memcpy(eiter->a.fabric_name, vha->fabric_node_name, WWN_SIZE);
-	eiter->len = cpu_to_be16(4 + WWN_SIZE);
-	size += 4 + WWN_SIZE;
-
-	ql_dbg(ql_dbg_disc, vha, 0x20c5,
-	    "Fabric Name = %016llx.\n", wwn_to_u64(eiter->a.fabric_name));
-
-	/* FC4_type */
-	eiter = entries + size;
-	eiter->type = cpu_to_be16(FDMI_PORT_FC4_TYPE);
-	eiter->a.port_fc4_type[0] = 0;
-	eiter->a.port_fc4_type[1] = 0;
-	eiter->a.port_fc4_type[2] = 1;
-	eiter->a.port_fc4_type[3] = 0;
-	eiter->len = cpu_to_be16(4 + 32);
-	size += 4 + 32;
-
-	ql_dbg(ql_dbg_disc, vha, 0x20c6,
-	    "Port Active FC4 Type = %02x %02x.\n",
-	    eiter->a.port_fc4_type[2], eiter->a.port_fc4_type[1]);
-
-	if (vha->flags.nvme_enabled) {
-		eiter->a.port_fc4_type[4] = 0;
-		eiter->a.port_fc4_type[5] = 0;
-		eiter->a.port_fc4_type[6] = 1;	/* NVMe type 28h */
-		ql_dbg(ql_dbg_disc, vha, 0x2120,
-		    "NVME Port Active FC4 Type = %02x 0x0 0x0 0x0 0x0 0x0.\n",
-		    eiter->a.port_fc4_type[6]);
-	}
-
-	/* Port State */
-	eiter = entries + size;
-	eiter->type = cpu_to_be16(FDMI_PORT_STATE);
-	eiter->a.port_state = cpu_to_be32(1);
-	eiter->len = cpu_to_be16(4 + 4);
-	size += 4 + 4;
-
-	ql_dbg(ql_dbg_disc, vha, 0x20c7,
-	    "Port State = %x.\n", eiter->a.port_state);
-
-	/* Number of Ports */
-	eiter = entries + size;
-	eiter->type = cpu_to_be16(FDMI_PORT_COUNT);
-	eiter->a.num_ports = cpu_to_be32(1);
-	eiter->len = cpu_to_be16(4 + 4);
-	size += 4 + 4;
-
-	ql_dbg(ql_dbg_disc, vha, 0x20c8,
-	    "Number of ports = %x.\n", eiter->a.num_ports);
-
-	/* Port Id */
-	eiter = entries + size;
-	eiter->type = cpu_to_be16(FDMI_PORT_ID);
-	eiter->a.port_id = cpu_to_be32(vha->d_id.b24);
-	eiter->len = cpu_to_be16(4 + 4);
-	size += 4 + 4;
-
-	ql_dbg(ql_dbg_disc, vha, 0x201c,
-	    "Port Id = %x.\n", eiter->a.port_id);
+	size += qla2x00_port_attributes(vha, entries, callopt);
 
 	/* Update MS request size. */
 	qla2x00_update_ms_fdmi_iocb(vha, size + 16);
 
-	ql_dbg(ql_dbg_disc, vha, 0x2018,
-	    "RPA portname= %8phN size=%d.\n", ct_req->req.rpa.port_name, size);
-	ql_dump_buffer(ql_dbg_disc + ql_dbg_buffer, vha, 0x20ca,
+	ql_dbg(ql_dbg_disc, vha, 0x20f1,
+	    "RPA %016llx.\n", wwn_to_u64(ct_req->req.rpa.port_name));
+
+	ql_dump_buffer(ql_dbg_disc + ql_dbg_buffer, vha, 0x20f2,
 	    entries, size);
 
 	/* Execute MS IOCB */
 	rval = qla2x00_issue_iocb(vha, ha->ms_iocb, ha->ms_iocb_dma,
-	    sizeof(ms_iocb_entry_t));
-	if (rval != QLA_SUCCESS) {
-		/*EMPTY*/
-		ql_dbg(ql_dbg_disc, vha, 0x20cb,
-		    "RPA FDMI v2 issue IOCB failed (%d).\n", rval);
-	} else if (qla2x00_chk_ms_status(vha, ms_pkt, ct_rsp, "RPA") !=
-	    QLA_SUCCESS) {
-		rval = QLA_FUNCTION_FAILED;
+	    sizeof(*ha->ms_iocb));
+	if (rval) {
+		ql_dbg(ql_dbg_disc, vha, 0x20f3,
+		    "RPA iocb failed (%d).\n", rval);
+		return rval;
+	}
+
+	rval = qla2x00_chk_ms_status(vha, ms_pkt, ct_rsp, "RPA");
+	if (rval) {
 		if (ct_rsp->header.reason_code == CT_REASON_CANNOT_PERFORM &&
 		    ct_rsp->header.explanation_code ==
 		    CT_EXPL_ALREADY_REGISTERED) {
-			ql_dbg(ql_dbg_disc, vha, 0x20ce,
-			    "RPA FDMI v2 already registered\n");
-			rval = QLA_ALREADY_REGISTERED;
-		} else {
-			ql_dbg(ql_dbg_disc, vha, 0x2020,
-			    "RPA FDMI v2 failed, CT Reason code: 0x%x, CT Explanation 0x%x\n",
-			    ct_rsp->header.reason_code,
-			    ct_rsp->header.explanation_code);
+			ql_dbg(ql_dbg_disc, vha, 0x20f4,
+			    "RPA already registered.\n");
+			return QLA_ALREADY_REGISTERED;
 		}
-	} else {
-		ql_dbg(ql_dbg_disc, vha, 0x20cc,
-		    "RPA FDMI V2 exiting normally.\n");
+
+		ql_dbg(ql_dbg_disc, vha, 0x20f5,
+		    "RPA failed, CT Reason code: %#x, CT Explanation %#x\n",
+		    ct_rsp->header.reason_code,
+		    ct_rsp->header.explanation_code);
+		return rval;
 	}
 
+	ql_dbg(ql_dbg_disc, vha, 0x20f6, "RPA exiting normally.\n");
 	return rval;
 }
 
@@ -2623,18 +2445,31 @@ qla2x00_fdmiv2_rpa(scsi_qla_host_t *vha)
 int
 qla2x00_fdmi_register(scsi_qla_host_t *vha)
 {
-	int rval = QLA_FUNCTION_FAILED;
+	int rval = QLA_SUCCESS;
 	struct qla_hw_data *ha = vha->hw;
 
 	if (IS_QLA2100(ha) || IS_QLA2200(ha) ||
 	    IS_QLAFX00(ha))
-		return QLA_FUNCTION_FAILED;
+		return rval;
 
 	rval = qla2x00_mgmt_svr_login(vha);
 	if (rval)
 		return rval;
 
-	rval = qla2x00_fdmiv2_rhba(vha);
+	/* For npiv/vport send rprt only */
+	if (vha->vp_idx) {
+		if (ql2xsmartsan)
+			rval = qla2x00_fdmi_rprt(vha, CALLOPT_FDMI2_SMARTSAN);
+		if (rval || !ql2xsmartsan)
+			rval = qla2x00_fdmi_rprt(vha, CALLOPT_FDMI2);
+		if (rval)
+			rval = qla2x00_fdmi_rprt(vha, CALLOPT_FDMI1);
+
+		return rval;
+	}
+
+	/* Try fdmi2 first, if fails then try fdmi1 */
+	rval = qla2x00_fdmi_rhba(vha, CALLOPT_FDMI2);
 	if (rval) {
 		if (rval != QLA_ALREADY_REGISTERED)
 			goto try_fdmi;
@@ -2643,18 +2478,22 @@ qla2x00_fdmi_register(scsi_qla_host_t *vha)
 		if (rval)
 			goto try_fdmi;
 
-		rval = qla2x00_fdmiv2_rhba(vha);
+		rval = qla2x00_fdmi_rhba(vha, CALLOPT_FDMI2);
 		if (rval)
 			goto try_fdmi;
 	}
-	rval = qla2x00_fdmiv2_rpa(vha);
+
+	if (ql2xsmartsan)
+		rval = qla2x00_fdmi_rpa(vha, CALLOPT_FDMI2_SMARTSAN);
+	if (rval || !ql2xsmartsan)
+		rval = qla2x00_fdmi_rpa(vha, CALLOPT_FDMI2);
 	if (rval)
 		goto try_fdmi;
 
-	goto out;
+	return rval;
 
 try_fdmi:
-	rval = qla2x00_fdmi_rhba(vha);
+	rval = qla2x00_fdmi_rhba(vha, CALLOPT_FDMI1);
 	if (rval) {
 		if (rval != QLA_ALREADY_REGISTERED)
 			return rval;
@@ -2663,12 +2502,13 @@ qla2x00_fdmi_register(scsi_qla_host_t *vha)
 		if (rval)
 			return rval;
 
-		rval = qla2x00_fdmi_rhba(vha);
+		rval = qla2x00_fdmi_rhba(vha, CALLOPT_FDMI1);
 		if (rval)
 			return rval;
 	}
-	rval = qla2x00_fdmi_rpa(vha);
-out:
+
+	rval = qla2x00_fdmi_rpa(vha, CALLOPT_FDMI1);
+
 	return rval;
 }
 
@@ -2893,7 +2733,7 @@ qla2x00_gff_id(scsi_qla_host_t *vha, sw_info_t *list)
 	for (i = 0; i < ha->max_fibre_devices; i++) {
 		/* Set default FC4 Type as UNKNOWN so the default is to
 		 * Process this port */
-		list[i].fc4_type = FC4_TYPE_UNKNOWN;
+		list[i].fc4_type = 0;
 
 		/* Do not attempt GFF_ID if we are not FWI_2 capable */
 		if (!IS_FWI2_CAPABLE(ha))
@@ -3243,7 +3083,7 @@ void qla24xx_handle_gpnid_event(scsi_qla_host_t *vha, struct event_arg *ea)
 			    "%s %d %8phC post new sess\n",
 			    __func__, __LINE__, ea->port_name);
 			qla24xx_post_newsess_work(vha, &ea->id,
-			    ea->port_name, NULL, NULL, FC4_TYPE_UNKNOWN);
+			    ea->port_name, NULL, NULL, 0);
 		}
 	}
 }
@@ -3647,6 +3487,7 @@ void qla24xx_async_gnnft_done(scsi_qla_host_t *vha, srb_t *sp)
 			if (memcmp(rp->port_name, fcport->port_name, WWN_SIZE))
 				continue;
 			fcport->scan_state = QLA_FCPORT_FOUND;
+			fcport->last_rscn_gen = fcport->rscn_gen;
 			found = true;
 			/*
 			 * If device was not a fabric device before.
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 9e6b565..caa6b84 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1043,7 +1043,7 @@ static void qla24xx_async_gnl_sp_done(srb_t *sp, int res)
 			    __func__, __LINE__, (u8 *)&wwn, id.b24);
 			wwnn = wwn_to_u64(e->node_name);
 			qla24xx_post_newsess_work(vha, &id, (u8 *)&wwn,
-			    (u8 *)&wwnn, NULL, FC4_TYPE_UNKNOWN);
+			    (u8 *)&wwnn, NULL, 0);
 		}
 	}
 
@@ -2219,10 +2219,10 @@ qla2x00_initialize_adapter(scsi_qla_host_t *vha)
 
 	/* Check for secure flash support */
 	if (IS_QLA28XX(ha)) {
-		if (RD_REG_DWORD(&reg->mailbox12) & BIT_0) {
-			ql_log(ql_log_info, vha, 0xffff, "Adapter is Secure\n");
+		if (RD_REG_DWORD(&reg->mailbox12) & BIT_0)
 			ha->flags.secure_adapter = 1;
-		}
+		ql_log(ql_log_info, vha, 0xffff, "Secure Adapter: %s\n",
+		    (ha->flags.secure_adapter) ? "Yes" : "No");
 	}
 
 
@@ -2270,6 +2270,12 @@ qla2x00_initialize_adapter(scsi_qla_host_t *vha)
 	ql_dbg(ql_dbg_init, vha, 0x0078,
 	    "Verifying loaded RISC code...\n");
 
+	/* If smartsan enabled then require fdmi and rdp enabled */
+	if (ql2xsmartsan) {
+		ql2xfdmienable = 1;
+		ql2xrdpenable = 1;
+	}
+
 	if (qla2x00_isp_firmware(vha) != QLA_SUCCESS) {
 		rval = ha->isp_ops->chip_diag(vha);
 		if (rval)
@@ -3544,53 +3550,75 @@ static void qla2xxx_print_sfp_info(struct scsi_qla_host *vha)
 }
 
 
-/*
- * Return Code:
- *   QLA_SUCCESS: no action
- *   QLA_INTERFACE_ERROR: SFP is not there.
- *   QLA_FUNCTION_FAILED: detected New SFP
+/**
+ * qla24xx_detect_sfp()
+ *
+ * @vha: adapter state pointer.
+ *
+ * @return
+ *	0 -- Configure firmware to use short-range settings -- normal
+ *	     buffer-to-buffer credits.
+ *
+ *	1 -- Configure firmware to use long-range settings -- extra
+ *	     buffer-to-buffer credits should be allocated with
+ *	     ha->lr_distance containing distance settings from NVRAM or SFP
+ *	     (if supported).
  */
 int
 qla24xx_detect_sfp(scsi_qla_host_t *vha)
 {
-	int rc = QLA_SUCCESS;
+	int rc, used_nvram;
 	struct sff_8247_a0 *a;
 	struct qla_hw_data *ha = vha->hw;
+	struct nvram_81xx *nv = ha->nvram;
+#define LR_DISTANCE_UNKNOWN	2
+	static const char * const types[] = { "Short", "Long" };
+	static const char * const lengths[] = { "(10km)", "(5km)", "" };
+	u8 ll = 0;
 
-	if (!AUTO_DETECT_SFP_SUPPORT(vha))
+	/* Seed with NVRAM settings. */
+	used_nvram = 0;
+	ha->flags.lr_detected = 0;
+	if (IS_BPM_RANGE_CAPABLE(ha) &&
+	    (nv->enhanced_features & NEF_LR_DIST_ENABLE)) {
+		used_nvram = 1;
+		ha->flags.lr_detected = 1;
+		ha->lr_distance =
+		    (nv->enhanced_features >> LR_DIST_NV_POS)
+		     & LR_DIST_NV_MASK;
+	}
+
+	if (!IS_BPM_ENABLED(vha))
 		goto out;
-
+	/* Determine SR/LR capabilities of SFP/Transceiver. */
 	rc = qla2x00_read_sfp_dev(vha, NULL, 0);
 	if (rc)
 		goto out;
 
+	used_nvram = 0;
 	a = (struct sff_8247_a0 *)vha->hw->sfp_data;
 	qla2xxx_print_sfp_info(vha);
 
-	if (a->fc_ll_cc7 & FC_LL_VL || a->fc_ll_cc7 & FC_LL_L) {
-		/* long range */
-		ha->flags.detected_lr_sfp = 1;
+	ha->flags.lr_detected = 0;
+	ll = a->fc_ll_cc7;
+	if (ll & FC_LL_VL || ll & FC_LL_L) {
+		/* Long range, track length. */
+		ha->flags.lr_detected = 1;
 
 		if (a->length_km > 5 || a->length_100m > 50)
-			ha->long_range_distance = LR_DISTANCE_10K;
+			ha->lr_distance = LR_DISTANCE_10K;
 		else
-			ha->long_range_distance = LR_DISTANCE_5K;
-
-		if (ha->flags.detected_lr_sfp != ha->flags.using_lr_setting)
-			ql_dbg(ql_dbg_async, vha, 0x507b,
-			    "Detected Long Range SFP.\n");
-	} else {
-		/* short range */
-		ha->flags.detected_lr_sfp = 0;
-		if (ha->flags.using_lr_setting)
-			ql_dbg(ql_dbg_async, vha, 0x5084,
-			    "Detected Short Range SFP.\n");
+			ha->lr_distance = LR_DISTANCE_5K;
 	}
 
-	if (!vha->flags.init_done)
-		rc = QLA_SUCCESS;
 out:
-	return rc;
+	ql_dbg(ql_dbg_async, vha, 0x507b,
+	    "SFP detect: %s-Range SFP %s (nvr=%x ll=%x lr=%x lrd=%x).\n",
+	    types[ha->flags.lr_detected],
+	    ha->flags.lr_detected ? lengths[ha->lr_distance] :
+	       lengths[LR_DISTANCE_UNKNOWN],
+	    used_nvram, ll, ha->flags.lr_detected, ha->lr_distance);
+	return ha->flags.lr_detected;
 }
 
 /**
@@ -3608,6 +3636,7 @@ qla2x00_setup_chip(scsi_qla_host_t *vha)
 	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 	unsigned long flags;
 	uint16_t fw_major_version;
+	int done_once = 0;
 
 	if (IS_P3P_TYPE(ha)) {
 		rval = ha->isp_ops->load_risc(vha, &srisc_address);
@@ -3628,6 +3657,7 @@ qla2x00_setup_chip(scsi_qla_host_t *vha)
 
 	qla81xx_mpi_sync(vha);
 
+execute_fw_with_lr:
 	/* Load firmware sequences */
 	rval = ha->isp_ops->load_risc(vha, &srisc_address);
 	if (rval == QLA_SUCCESS) {
@@ -3649,7 +3679,15 @@ qla2x00_setup_chip(scsi_qla_host_t *vha)
 			rval = qla2x00_execute_fw(vha, srisc_address);
 			/* Retrieve firmware information. */
 			if (rval == QLA_SUCCESS) {
-				qla24xx_detect_sfp(vha);
+				/* Enable BPM support? */
+				if (!done_once++ && qla24xx_detect_sfp(vha)) {
+					ql_dbg(ql_dbg_init, vha, 0x00ca,
+					    "Re-starting firmware -- BPM.\n");
+					/* Best-effort - re-init. */
+					ha->isp_ops->reset_chip(vha);
+					ha->isp_ops->chip_diag(vha);
+					goto execute_fw_with_lr;
+				}
 
 				if ((IS_QLA83XX(ha) || IS_QLA27XX(ha) ||
 				    IS_QLA28XX(ha)) &&
@@ -3708,6 +3746,10 @@ qla2x00_setup_chip(scsi_qla_host_t *vha)
 			    "ISP Firmware failed checksum.\n");
 			goto failed;
 		}
+
+		/* Enable PUREX PASSTHRU */
+		if (ql2xrdpenable)
+			qla25xx_set_els_cmds_supported(vha);
 	} else
 		goto failed;
 
@@ -3919,6 +3961,13 @@ qla24xx_update_fw_options(scsi_qla_host_t *vha)
 			ha->fw_options[2] &= ~BIT_8;
 	}
 
+	if (ql2xrdpenable)
+		ha->fw_options[1] |= ADD_FO1_ENABLE_PUREX_IOCB;
+
+	/* Enable Async 8130/8131 events -- transceiver insertion/removal */
+	if (IS_BPM_RANGE_CAPABLE(ha))
+		ha->fw_options[3] |= BIT_10;
+
 	ql_dbg(ql_dbg_init, vha, 0x00e8,
 	    "%s, add FW options 1-3 = 0x%04x 0x%04x 0x%04x mode %x\n",
 	    __func__, ha->fw_options[1], ha->fw_options[2],
@@ -5060,7 +5109,7 @@ qla2x00_configure_local_loop(scsi_qla_host_t *vha)
 	if (N2N_TOPO(ha)) {
 		if (test_and_clear_bit(N2N_LOGIN_NEEDED, &vha->dpc_flags)) {
 			/* borrowing */
-			u32 *bp, i, sz;
+			u32 *bp, sz;
 
 			memset(ha->init_cb, 0, ha->init_cb_size);
 			sz = min_t(int, sizeof(struct els_plogi_payload),
@@ -5068,13 +5117,12 @@ qla2x00_configure_local_loop(scsi_qla_host_t *vha)
 			rval = qla24xx_get_port_login_templ(vha,
 			    ha->init_cb_dma, (void *)ha->init_cb, sz);
 			if (rval == QLA_SUCCESS) {
-				bp = (uint32_t *)ha->init_cb;
-				for (i = 0; i < sz/4 ; i++, bp++)
-					*bp = cpu_to_be32(*bp);
+				__be32 *q = &ha->plogi_els_payld.data[0];
 
-				memcpy(&ha->plogi_els_payld.data,
-				    (void *)ha->init_cb,
-				    sizeof(ha->plogi_els_payld.data));
+				bp = (uint32_t *)ha->init_cb;
+				cpu_to_be32_array(q, bp, sz / 4);
+
+				memcpy(bp, q, sizeof(ha->plogi_els_payld.data));
 			} else {
 				ql_dbg(ql_dbg_init, vha, 0x00d1,
 				    "PLOGI ELS param read fail.\n");
@@ -5097,6 +5145,7 @@ qla2x00_configure_local_loop(scsi_qla_host_t *vha)
 			set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags);
 			set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
 		}
+		return QLA_FUNCTION_FAILED;
 	}
 
 	found_devs = 0;
@@ -5541,24 +5590,22 @@ qla2x00_configure_fabric(scsi_qla_host_t *vha)
 	}
 	vha->device_flags |= SWITCH_FOUND;
 
+	rval = qla2x00_get_port_name(vha, loop_id, vha->fabric_port_name, 0);
+	if (rval != QLA_SUCCESS)
+		ql_dbg(ql_dbg_disc, vha, 0x20ff,
+		    "Failed to get Fabric Port Name\n");
 
 	if (qla_tgt_mode_enabled(vha) || qla_dual_mode_enabled(vha)) {
 		rval = qla2x00_send_change_request(vha, 0x3, 0);
 		if (rval != QLA_SUCCESS)
 			ql_log(ql_log_warn, vha, 0x121,
-				"Failed to enable receiving of RSCN requests: 0x%x.\n",
-				rval);
+			    "Failed to enable receiving of RSCN requests: 0x%x.\n",
+			    rval);
 	}
 
-
 	do {
 		qla2x00_mgmt_svr_login(vha);
 
-		/* FDMI support. */
-		if (ql2xfdmienable &&
-		    test_and_clear_bit(REGISTER_FDMI_NEEDED, &vha->dpc_flags))
-			qla2x00_fdmi_register(vha);
-
 		/* Ensure we are logged into the SNS. */
 		loop_id = NPH_SNS_LID(ha);
 		rval = ha->isp_ops->fabric_login(vha, loop_id, 0xff, 0xff,
@@ -5570,6 +5617,12 @@ qla2x00_configure_fabric(scsi_qla_host_t *vha)
 			set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
 			return rval;
 		}
+
+		/* FDMI support. */
+		if (ql2xfdmienable &&
+		    test_and_clear_bit(REGISTER_FDMI_NEEDED, &vha->dpc_flags))
+			qla2x00_fdmi_register(vha);
+
 		if (test_and_clear_bit(REGISTER_FC4_NEEDED, &vha->dpc_flags)) {
 			if (qla2x00_rft_id(vha)) {
 				/* EMPTY */
@@ -5812,7 +5865,7 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha)
 		/* Bypass ports whose FCP-4 type is not FCP_SCSI */
 		if (ql2xgffidenable &&
 		    (!(new_fcport->fc4_type & FS_FC4TYPE_FCP) &&
-		    new_fcport->fc4_type != FC4_TYPE_UNKNOWN))
+		    new_fcport->fc4_type != 0))
 			continue;
 
 		spin_lock_irqsave(&vha->hw->tgt.sess_lock, flags);
@@ -6656,7 +6709,7 @@ qla2x00_abort_isp_cleanup(scsi_qla_host_t *vha)
 	ha->flags.n2n_ae = 0;
 	ha->flags.lip_ae = 0;
 	ha->current_topology = 0;
-	ha->flags.fw_started = 0;
+	QLA_FW_STOPPED(ha);
 	ha->flags.fw_init_done = 0;
 	ha->chip_reset++;
 	ha->base_qpair->chip_reset = ha->chip_reset;
@@ -8663,61 +8716,6 @@ qla82xx_restart_isp(scsi_qla_host_t *vha)
 	return status;
 }
 
-void
-qla81xx_update_fw_options(scsi_qla_host_t *vha)
-{
-	struct qla_hw_data *ha = vha->hw;
-
-	/*  Hold status IOCBs until ABTS response received. */
-	if (ql2xfwholdabts)
-		ha->fw_options[3] |= BIT_12;
-
-	/* Set Retry FLOGI in case of P2P connection */
-	if (ha->operating_mode == P2P) {
-		ha->fw_options[2] |= BIT_3;
-		ql_dbg(ql_dbg_disc, vha, 0x2103,
-		    "(%s): Setting FLOGI retry BIT in fw_options[2]: 0x%x\n",
-			__func__, ha->fw_options[2]);
-	}
-
-	/* Move PUREX, ABTS RX & RIDA to ATIOQ */
-	if (ql2xmvasynctoatio) {
-		if (qla_tgt_mode_enabled(vha) ||
-		    qla_dual_mode_enabled(vha))
-			ha->fw_options[2] |= BIT_11;
-		else
-			ha->fw_options[2] &= ~BIT_11;
-	}
-
-	if (qla_tgt_mode_enabled(vha) ||
-	    qla_dual_mode_enabled(vha)) {
-		/* FW auto send SCSI status during */
-		ha->fw_options[1] |= BIT_8;
-		ha->fw_options[10] |= (u16)SAM_STAT_BUSY << 8;
-
-		/* FW perform Exchange validation */
-		ha->fw_options[2] |= BIT_4;
-	} else {
-		ha->fw_options[1]  &= ~BIT_8;
-		ha->fw_options[10] &= 0x00ff;
-
-		ha->fw_options[2] &= ~BIT_4;
-	}
-
-	if (ql2xetsenable) {
-		/* Enable ETS Burst. */
-		memset(ha->fw_options, 0, sizeof(ha->fw_options));
-		ha->fw_options[2] |= BIT_9;
-	}
-
-	ql_dbg(ql_dbg_init, vha, 0x00e9,
-	    "%s, add FW options 1-3 = 0x%04x 0x%04x 0x%04x mode %x\n",
-	    __func__, ha->fw_options[1], ha->fw_options[2],
-	    ha->fw_options[3], vha->host->active_mode);
-
-	qla2x00_set_fw_options(vha, ha->fw_options);
-}
-
 /*
  * qla24xx_get_fcp_prio
  *	Gets the fcp cmd priority value for the logged in port.
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index 47bf60a..182bd68c 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -530,7 +530,7 @@ __qla2x00_marker(struct scsi_qla_host *vha, struct qla_qpair *qpair,
 			int_to_scsilun(lun, (struct scsi_lun *)&mrk24->lun);
 			host_to_fcp_swap(mrk24->lun, sizeof(mrk24->lun));
 			mrk24->vp_index = vha->vp_idx;
-			mrk24->handle = MAKE_HANDLE(req->id, mrk24->handle);
+			mrk24->handle = make_handle(req->id, mrk24->handle);
 		} else {
 			SET_TARGET_ID(ha, mrk->target, loop_id);
 			mrk->lun = cpu_to_le16((uint16_t)lun);
@@ -1655,7 +1655,7 @@ qla24xx_start_scsi(srb_t *sp)
 	req->cnt -= req_cnt;
 
 	cmd_pkt = (struct cmd_type_7 *)req->ring_ptr;
-	cmd_pkt->handle = MAKE_HANDLE(req->id, handle);
+	cmd_pkt->handle = make_handle(req->id, handle);
 
 	/* Zero out remaining portion of packet. */
 	/*    tagged queuing modifier -- default is TSK_SIMPLE (0). */
@@ -1843,7 +1843,7 @@ qla24xx_dif_start_scsi(srb_t *sp)
 
 	/* Fill-in common area */
 	cmd_pkt = (struct cmd_type_crc_2 *)req->ring_ptr;
-	cmd_pkt->handle = MAKE_HANDLE(req->id, handle);
+	cmd_pkt->handle = make_handle(req->id, handle);
 
 	clr_ptr = (uint32_t *)cmd_pkt + 2;
 	memset(clr_ptr, 0, REQUEST_ENTRY_SIZE - 8);
@@ -1975,7 +1975,7 @@ qla2xxx_start_scsi_mq(srb_t *sp)
 	req->cnt -= req_cnt;
 
 	cmd_pkt = (struct cmd_type_7 *)req->ring_ptr;
-	cmd_pkt->handle = MAKE_HANDLE(req->id, handle);
+	cmd_pkt->handle = make_handle(req->id, handle);
 
 	/* Zero out remaining portion of packet. */
 	/*    tagged queuing modifier -- default is TSK_SIMPLE (0). */
@@ -2178,7 +2178,7 @@ qla2xxx_dif_start_scsi_mq(srb_t *sp)
 
 	/* Fill-in common area */
 	cmd_pkt = (struct cmd_type_crc_2 *)req->ring_ptr;
-	cmd_pkt->handle = MAKE_HANDLE(req->id, handle);
+	cmd_pkt->handle = make_handle(req->id, handle);
 
 	clr_ptr = (uint32_t *)cmd_pkt + 2;
 	memset(clr_ptr, 0, REQUEST_ENTRY_SIZE - 8);
@@ -2362,6 +2362,8 @@ qla24xx_login_iocb(srb_t *sp, struct logio_entry_24xx *logio)
 	struct srb_iocb *lio = &sp->u.iocb_cmd;
 
 	logio->entry_type = LOGINOUT_PORT_IOCB_TYPE;
+	logio->control_flags = cpu_to_le16(LCF_COMMAND_PLOGI);
+
 	if (lio->u.logio.flags & SRB_LOGIN_PRLI_ONLY) {
 		logio->control_flags = cpu_to_le16(LCF_COMMAND_PRLI);
 	} else {
@@ -2489,7 +2491,7 @@ qla24xx_tm_iocb(srb_t *sp, struct tsk_mgmt_entry *tsk)
 
 	tsk->entry_type = TSK_MGMT_IOCB_TYPE;
 	tsk->entry_count = 1;
-	tsk->handle = MAKE_HANDLE(req->id, tsk->handle);
+	tsk->handle = make_handle(req->id, tsk->handle);
 	tsk->nport_handle = cpu_to_le16(fcport->loop_id);
 	tsk->timeout = cpu_to_le16(ha->r_a_tov / 10 * 2);
 	tsk->control_flags = cpu_to_le32(flags);
@@ -2684,9 +2686,9 @@ qla24xx_els_logo_iocb(srb_t *sp, struct els_entry_24xx *els_iocb)
 	els_iocb->rx_dsd_count = 0;
 	els_iocb->opcode = elsio->u.els_logo.els_cmd;
 
-	els_iocb->port_id[0] = sp->fcport->d_id.b.al_pa;
-	els_iocb->port_id[1] = sp->fcport->d_id.b.area;
-	els_iocb->port_id[2] = sp->fcport->d_id.b.domain;
+	els_iocb->d_id[0] = sp->fcport->d_id.b.al_pa;
+	els_iocb->d_id[1] = sp->fcport->d_id.b.area;
+	els_iocb->d_id[2] = sp->fcport->d_id.b.domain;
 	/* For SID the byte order is different than DID */
 	els_iocb->s_id[1] = vha->d_id.b.al_pa;
 	els_iocb->s_id[2] = vha->d_id.b.area;
@@ -2939,7 +2941,6 @@ qla24xx_els_dcmd2_iocb(scsi_qla_host_t *vha, int els_opcode,
 	sp->fcport = fcport;
 
 	elsio->timeout = qla2x00_els_dcmd2_iocb_timeout;
-	init_completion(&elsio->u.els_plogi.comp);
 	if (wait)
 		sp->flags = SRB_WAKEUP_ON_COMP;
 
@@ -2949,7 +2950,7 @@ qla24xx_els_dcmd2_iocb(scsi_qla_host_t *vha, int els_opcode,
 	elsio->u.els_plogi.tx_size = elsio->u.els_plogi.rx_size = DMA_POOL_SIZE;
 
 	ptr = elsio->u.els_plogi.els_plogi_pyld =
-	    dma_alloc_coherent(&ha->pdev->dev, DMA_POOL_SIZE,
+	    dma_alloc_coherent(&ha->pdev->dev, elsio->u.els_plogi.tx_size,
 		&elsio->u.els_plogi.els_plogi_pyld_dma, GFP_KERNEL);
 
 	if (!elsio->u.els_plogi.els_plogi_pyld) {
@@ -2958,7 +2959,7 @@ qla24xx_els_dcmd2_iocb(scsi_qla_host_t *vha, int els_opcode,
 	}
 
 	resp_ptr = elsio->u.els_plogi.els_resp_pyld =
-	    dma_alloc_coherent(&ha->pdev->dev, DMA_POOL_SIZE,
+	    dma_alloc_coherent(&ha->pdev->dev, elsio->u.els_plogi.rx_size,
 		&elsio->u.els_plogi.els_resp_pyld_dma, GFP_KERNEL);
 
 	if (!elsio->u.els_plogi.els_resp_pyld) {
@@ -2982,6 +2983,7 @@ qla24xx_els_dcmd2_iocb(scsi_qla_host_t *vha, int els_opcode,
 	    (uint8_t *)elsio->u.els_plogi.els_plogi_pyld,
 	    sizeof(*elsio->u.els_plogi.els_plogi_pyld));
 
+	init_completion(&elsio->u.els_plogi.comp);
 	rval = qla2x00_start_sp(sp);
 	if (rval != QLA_SUCCESS) {
 		rval = QLA_FUNCTION_FAILED;
@@ -3030,9 +3032,9 @@ qla24xx_els_iocb(srb_t *sp, struct els_entry_24xx *els_iocb)
 	    sp->type == SRB_ELS_CMD_RPT ?
 	    bsg_request->rqst_data.r_els.els_code :
 	    bsg_request->rqst_data.h_els.command_code;
-        els_iocb->port_id[0] = sp->fcport->d_id.b.al_pa;
-        els_iocb->port_id[1] = sp->fcport->d_id.b.area;
-        els_iocb->port_id[2] = sp->fcport->d_id.b.domain;
+	els_iocb->d_id[0] = sp->fcport->d_id.b.al_pa;
+	els_iocb->d_id[1] = sp->fcport->d_id.b.area;
+	els_iocb->d_id[2] = sp->fcport->d_id.b.domain;
         els_iocb->control_flags = 0;
         els_iocb->rx_byte_count =
             cpu_to_le32(bsg_job->reply_payload.payload_len);
@@ -3358,7 +3360,7 @@ qla82xx_start_scsi(srb_t *sp)
 		}
 
 		cmd_pkt = (struct cmd_type_6 *)req->ring_ptr;
-		cmd_pkt->handle = MAKE_HANDLE(req->id, handle);
+		cmd_pkt->handle = make_handle(req->id, handle);
 
 		/* Zero out remaining portion of packet. */
 		/*    tagged queuing modifier -- default is TSK_SIMPLE (0). */
@@ -3429,7 +3431,7 @@ qla82xx_start_scsi(srb_t *sp)
 			goto queuing_error;
 
 		cmd_pkt = (struct cmd_type_7 *)req->ring_ptr;
-		cmd_pkt->handle = MAKE_HANDLE(req->id, handle);
+		cmd_pkt->handle = make_handle(req->id, handle);
 
 		/* Zero out remaining portion of packet. */
 		/* tagged queuing modifier -- default is TSK_SIMPLE (0).*/
@@ -3534,7 +3536,7 @@ qla24xx_abort_iocb(srb_t *sp, struct abort_entry_24xx *abt_iocb)
 	memset(abt_iocb, 0, sizeof(struct abort_entry_24xx));
 	abt_iocb->entry_type = ABORT_IOCB_TYPE;
 	abt_iocb->entry_count = 1;
-	abt_iocb->handle = cpu_to_le32(MAKE_HANDLE(req->id, sp->handle));
+	abt_iocb->handle = cpu_to_le32(make_handle(req->id, sp->handle));
 	if (sp->fcport) {
 		abt_iocb->nport_handle = cpu_to_le16(sp->fcport->loop_id);
 		abt_iocb->port_id[0] = sp->fcport->d_id.b.al_pa;
@@ -3542,7 +3544,7 @@ qla24xx_abort_iocb(srb_t *sp, struct abort_entry_24xx *abt_iocb)
 		abt_iocb->port_id[2] = sp->fcport->d_id.b.domain;
 	}
 	abt_iocb->handle_to_abort =
-	    cpu_to_le32(MAKE_HANDLE(aio->u.abt.req_que_no,
+	    cpu_to_le32(make_handle(aio->u.abt.req_que_no,
 				    aio->u.abt.cmd_hndl));
 	abt_iocb->vp_index = vha->vp_idx;
 	abt_iocb->req_que_no = cpu_to_le16(aio->u.abt.req_que_no);
@@ -3905,7 +3907,7 @@ qla2x00_start_bidir(srb_t *sp, struct scsi_qla_host *vha, uint32_t tot_dsds)
 	}
 
 	cmd_pkt = (struct cmd_bidir *)req->ring_ptr;
-	cmd_pkt->handle = MAKE_HANDLE(req->id, handle);
+	cmd_pkt->handle = make_handle(req->id, handle);
 
 	/* Zero out remaining portion of packet. */
 	/* tagged queuing modifier -- default is TSK_SIMPLE (0).*/
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index e40705d..8a78d39 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -31,6 +31,143 @@ const char *const port_state_str[] = {
 	"ONLINE"
 };
 
+static void qla24xx_purex_iocb(scsi_qla_host_t *vha, void *pkt,
+	void (*process_item)(struct scsi_qla_host *vha, void *pkt))
+{
+	struct purex_list *list = &vha->purex_list;
+	struct purex_item *item;
+	ulong flags;
+
+	item = kzalloc(sizeof(*item), GFP_KERNEL);
+	if (!item) {
+		ql_log(ql_log_warn, vha, 0x5092,
+		    ">> Failed allocate purex list item.\n");
+		return;
+	}
+
+	item->vha = vha;
+	item->process_item = process_item;
+	memcpy(&item->iocb, pkt, sizeof(item->iocb));
+
+	spin_lock_irqsave(&list->lock, flags);
+	list_add_tail(&item->list, &list->head);
+	spin_unlock_irqrestore(&list->lock, flags);
+
+	set_bit(PROCESS_PUREX_IOCB, &vha->dpc_flags);
+}
+
+static void
+qla24xx_process_abts(struct scsi_qla_host *vha, void *pkt)
+{
+	struct abts_entry_24xx *abts = pkt;
+	struct qla_hw_data *ha = vha->hw;
+	struct els_entry_24xx *rsp_els;
+	struct abts_entry_24xx *abts_rsp;
+	dma_addr_t dma;
+	uint32_t fctl;
+	int rval;
+
+	ql_dbg(ql_dbg_init, vha, 0x0286, "%s: entered.\n", __func__);
+
+	ql_log(ql_log_warn, vha, 0x0287,
+	    "Processing ABTS xchg=%#x oxid=%#x rxid=%#x seqid=%#x seqcnt=%#x\n",
+	    abts->rx_xch_addr_to_abort, abts->ox_id, abts->rx_id,
+	    abts->seq_id, abts->seq_cnt);
+	ql_dbg(ql_dbg_init + ql_dbg_verbose, vha, 0x0287,
+	    "-------- ABTS RCV -------\n");
+	ql_dump_buffer(ql_dbg_init + ql_dbg_verbose, vha, 0x0287,
+	    (uint8_t *)abts, sizeof(*abts));
+
+	rsp_els = dma_alloc_coherent(&ha->pdev->dev, sizeof(*rsp_els), &dma,
+	    GFP_KERNEL);
+	if (!rsp_els) {
+		ql_log(ql_log_warn, vha, 0x0287,
+		    "Failed allocate dma buffer ABTS/ELS RSP.\n");
+		return;
+	}
+
+	/* terminate exchange */
+	rsp_els->entry_type = ELS_IOCB_TYPE;
+	rsp_els->entry_count = 1;
+	rsp_els->nport_handle = ~0;
+	rsp_els->rx_xchg_address = abts->rx_xch_addr_to_abort;
+	rsp_els->control_flags = EPD_RX_XCHG;
+	ql_dbg(ql_dbg_init, vha, 0x0283,
+	    "Sending ELS Response to terminate exchange %#x...\n",
+	    abts->rx_xch_addr_to_abort);
+	ql_dbg(ql_dbg_init + ql_dbg_verbose, vha, 0x0283,
+	    "-------- ELS RSP -------\n");
+	ql_dump_buffer(ql_dbg_init + ql_dbg_verbose, vha, 0x0283,
+	    (uint8_t *)rsp_els, sizeof(*rsp_els));
+	rval = qla2x00_issue_iocb(vha, rsp_els, dma, 0);
+	if (rval) {
+		ql_log(ql_log_warn, vha, 0x0288,
+		    "%s: iocb failed to execute -> %x\n", __func__, rval);
+	} else if (rsp_els->comp_status) {
+		ql_log(ql_log_warn, vha, 0x0289,
+		    "%s: iocb failed to complete -> completion=%#x subcode=(%#x,%#x)\n",
+		    __func__, rsp_els->comp_status,
+		    rsp_els->error_subcode_1, rsp_els->error_subcode_2);
+	} else {
+		ql_dbg(ql_dbg_init, vha, 0x028a,
+		    "%s: abort exchange done.\n", __func__);
+	}
+
+	/* send ABTS response */
+	abts_rsp = (void *)rsp_els;
+	memset(abts_rsp, 0, sizeof(*abts_rsp));
+	abts_rsp->entry_type = ABTS_RSP_TYPE;
+	abts_rsp->entry_count = 1;
+	abts_rsp->nport_handle = abts->nport_handle;
+	abts_rsp->vp_idx = abts->vp_idx;
+	abts_rsp->sof_type = abts->sof_type & 0xf0;
+	abts_rsp->rx_xch_addr = abts->rx_xch_addr;
+	abts_rsp->d_id[0] = abts->s_id[0];
+	abts_rsp->d_id[1] = abts->s_id[1];
+	abts_rsp->d_id[2] = abts->s_id[2];
+	abts_rsp->r_ctl = FC_ROUTING_BLD | FC_R_CTL_BLD_BA_ACC;
+	abts_rsp->s_id[0] = abts->d_id[0];
+	abts_rsp->s_id[1] = abts->d_id[1];
+	abts_rsp->s_id[2] = abts->d_id[2];
+	abts_rsp->cs_ctl = abts->cs_ctl;
+	/* include flipping bit23 in fctl */
+	fctl = ~(abts->f_ctl[2] | 0x7F) << 16 |
+	    FC_F_CTL_LAST_SEQ | FC_F_CTL_END_SEQ | FC_F_CTL_SEQ_INIT;
+	abts_rsp->f_ctl[0] = fctl >> 0 & 0xff;
+	abts_rsp->f_ctl[1] = fctl >> 8 & 0xff;
+	abts_rsp->f_ctl[2] = fctl >> 16 & 0xff;
+	abts_rsp->type = FC_TYPE_BLD;
+	abts_rsp->rx_id = abts->rx_id;
+	abts_rsp->ox_id = abts->ox_id;
+	abts_rsp->payload.ba_acc.aborted_rx_id = abts->rx_id;
+	abts_rsp->payload.ba_acc.aborted_ox_id = abts->ox_id;
+	abts_rsp->payload.ba_acc.high_seq_cnt = ~0;
+	abts_rsp->rx_xch_addr_to_abort = abts->rx_xch_addr_to_abort;
+	ql_dbg(ql_dbg_init, vha, 0x028b,
+	    "Sending BA ACC response to ABTS %#x...\n",
+	    abts->rx_xch_addr_to_abort);
+	ql_dbg(ql_dbg_init + ql_dbg_verbose, vha, 0x028b,
+	    "-------- ELS RSP -------\n");
+	ql_dump_buffer(ql_dbg_init + ql_dbg_verbose, vha, 0x028b,
+	    (uint8_t *)abts_rsp, sizeof(*abts_rsp));
+	rval = qla2x00_issue_iocb(vha, abts_rsp, dma, 0);
+	if (rval) {
+		ql_log(ql_log_warn, vha, 0x028c,
+		    "%s: iocb failed to execute -> %x\n", __func__, rval);
+	} else if (abts_rsp->comp_status) {
+		ql_log(ql_log_warn, vha, 0x028d,
+		    "%s: iocb failed to complete -> completion=%#x subcode=(%#x,%#x)\n",
+		    __func__, abts_rsp->comp_status,
+		    abts_rsp->payload.error.subcode1,
+		    abts_rsp->payload.error.subcode2);
+	} else {
+		ql_dbg(ql_dbg_init, vha, 0x028ea,
+		    "%s: done.\n", __func__);
+	}
+
+	dma_free_coherent(&ha->pdev->dev, sizeof(*rsp_els), rsp_els, dma);
+}
+
 /**
  * qla2100_intr_handler() - Process interrupts for the ISP2100 and ISP2200.
  * @irq: interrupt number
@@ -716,12 +853,24 @@ qla2x00_async_event(scsi_qla_host_t *vha, struct rsp_que *rsp, uint16_t *mb)
 		break;
 
 	case MBA_SYSTEM_ERR:		/* System Error */
-		mbx = (IS_QLA81XX(ha) || IS_QLA83XX(ha) || IS_QLA27XX(ha) ||
-		    IS_QLA28XX(ha)) ?
-			RD_REG_WORD(&reg24->mailbox7) : 0;
-		ql_log(ql_log_warn, vha, 0x5003,
-		    "ISP System Error - mbx1=%xh mbx2=%xh mbx3=%xh "
-		    "mbx7=%xh.\n", mb[1], mb[2], mb[3], mbx);
+		mbx = 0;
+		if (IS_QLA81XX(ha) || IS_QLA83XX(ha) ||
+		    IS_QLA27XX(ha) || IS_QLA28XX(ha)) {
+			u16 m[4];
+
+			m[0] = RD_REG_WORD(&reg24->mailbox4);
+			m[1] = RD_REG_WORD(&reg24->mailbox5);
+			m[2] = RD_REG_WORD(&reg24->mailbox6);
+			mbx = m[3] = RD_REG_WORD(&reg24->mailbox7);
+
+			ql_log(ql_log_warn, vha, 0x5003,
+			    "ISP System Error - mbx1=%xh mbx2=%xh mbx3=%xh mbx4=%xh mbx5=%xh mbx6=%xh mbx7=%xh.\n",
+			    mb[1], mb[2], mb[3], m[0], m[1], m[2], m[3]);
+		} else
+			ql_log(ql_log_warn, vha, 0x5003,
+			    "ISP System Error - mbx1=%xh mbx2=%xh mbx3=%xh.\n ",
+			    mb[1], mb[2], mb[3]);
+
 		ha->fw_dump_mpi =
 		    (IS_QLA27XX(ha) || IS_QLA28XX(ha)) &&
 		    RD_REG_WORD(&reg24->mailbox7) & BIT_8;
@@ -813,13 +962,15 @@ qla2x00_async_event(scsi_qla_host_t *vha, struct rsp_que *rsp, uint16_t *mb)
 		    "LOOP UP detected (%s Gbps).\n",
 		    qla2x00_get_link_speed_str(ha, ha->link_data_rate));
 
+		if (IS_QLA83XX(ha) || IS_QLA27XX(ha) || IS_QLA28XX(ha)) {
+			if (mb[2] & BIT_0)
+				ql_log(ql_log_info, vha, 0x11a0,
+				    "FEC=enabled (link up).\n");
+		}
+
 		vha->flags.management_server_logged_in = 0;
 		qla2x00_post_aen_work(vha, FCH_EVT_LINKUP, ha->link_data_rate);
 
-		if (AUTO_DETECT_SFP_SUPPORT(vha)) {
-			set_bit(DETECT_SFP_CHANGE, &vha->dpc_flags);
-			qla2xxx_wake_dpc(vha);
-		}
 		break;
 
 	case MBA_LOOP_DOWN:		/* Loop Down Event */
@@ -1254,6 +1405,7 @@ qla2x00_async_event(scsi_qla_host_t *vha, struct rsp_que *rsp, uint16_t *mb)
 		ql_dbg(ql_dbg_async, vha, 0x5052,
 		    "D-Port Diagnostics: %04x %04x %04x %04x\n",
 		    mb[0], mb[1], mb[2], mb[3]);
+		memcpy(vha->dport_data, mb, sizeof(vha->dport_data));
 		if (IS_QLA83XX(ha) || IS_QLA27XX(ha) || IS_QLA28XX(ha)) {
 			static char *results[] = {
 			    "start", "done(pass)", "done(error)", "undefined" };
@@ -1291,6 +1443,11 @@ qla2x00_async_event(scsi_qla_host_t *vha, struct rsp_que *rsp, uint16_t *mb)
 	case MBA_TRANS_INSERT:
 		ql_dbg(ql_dbg_async, vha, 0x5091,
 		    "Transceiver Insertion: %04x\n", mb[1]);
+		set_bit(DETECT_SFP_CHANGE, &vha->dpc_flags);
+		break;
+
+	case MBA_TRANS_REMOVE:
+		ql_dbg(ql_dbg_async, vha, 0x5091, "Transceiver Removal\n");
 		break;
 
 	default:
@@ -1754,11 +1911,9 @@ qla24xx_logio_entry(scsi_qla_host_t *vha, struct req_que *req,
 	}
 
 	if (le16_to_cpu(logio->comp_status) == CS_COMPLETE) {
-		ql_dbg(ql_dbg_async, fcport->vha, 0x5036,
-		    "Async-%s complete - %8phC hdl=%x portid=%02x%02x%02x "
-		    "iop0=%x.\n", type, fcport->port_name, sp->handle,
-		    fcport->d_id.b.domain,
-		    fcport->d_id.b.area, fcport->d_id.b.al_pa,
+		ql_dbg(ql_dbg_async, sp->vha, 0x5036,
+		    "Async-%s complete: handle=%x pid=%06x wwpn=%8phC iop0=%x\n",
+		    type, sp->handle, fcport->d_id.b24, fcport->port_name,
 		    le32_to_cpu(logio->io_parameter[0]));
 
 		vha->hw->exch_starvation = 0;
@@ -1837,11 +1992,9 @@ qla24xx_logio_entry(scsi_qla_host_t *vha, struct req_que *req,
 		break;
 	}
 
-	ql_dbg(ql_dbg_async, fcport->vha, 0x5037,
-	    "Async-%s failed - %8phC hdl=%x portid=%02x%02x%02x comp=%x "
-	    "iop0=%x iop1=%x.\n", type, fcport->port_name,
-		sp->handle, fcport->d_id.b.domain,
-	    fcport->d_id.b.area, fcport->d_id.b.al_pa,
+	ql_dbg(ql_dbg_async, sp->vha, 0x5037,
+	    "Async-%s failed: handle=%x pid=%06x wwpn=%8phC comp_status=%x iop0=%x iop1=%x\n",
+	    type, sp->handle, fcport->d_id.b24, fcport->port_name,
 	    le16_to_cpu(logio->comp_status),
 	    le32_to_cpu(logio->io_parameter[0]),
 	    le32_to_cpu(logio->io_parameter[1]));
@@ -1910,6 +2063,7 @@ static void qla24xx_nvme_iocb_entry(scsi_qla_host_t *vha, struct req_que *req,
 	struct nvmefc_fcp_req *fd;
 	uint16_t        ret = QLA_SUCCESS;
 	uint16_t	comp_status = le16_to_cpu(sts->comp_status);
+	int		logit = 0;
 
 	iocb = &sp->u.iocb_cmd;
 	fcport = sp->fcport;
@@ -1920,6 +2074,12 @@ static void qla24xx_nvme_iocb_entry(scsi_qla_host_t *vha, struct req_que *req,
 	if (unlikely(iocb->u.nvme.aen_op))
 		atomic_dec(&sp->vha->hw->nvme_active_aen_cnt);
 
+	if (unlikely(comp_status != CS_COMPLETE))
+		logit = 1;
+
+	fd->transferred_length = fd->payload_length -
+	    le32_to_cpu(sts->residual_len);
+
 	/*
 	 * State flags: Bit 6 and 0.
 	 * If 0 is set, we don't care about 6.
@@ -1930,8 +2090,20 @@ static void qla24xx_nvme_iocb_entry(scsi_qla_host_t *vha, struct req_que *req,
 	 */
 	if (!(state_flags & (SF_FCP_RSP_DMA | SF_NVME_ERSP))) {
 		iocb->u.nvme.rsp_pyld_len = 0;
-	} else if ((state_flags & SF_FCP_RSP_DMA)) {
+	} else if ((state_flags & (SF_FCP_RSP_DMA | SF_NVME_ERSP)) ==
+			(SF_FCP_RSP_DMA | SF_NVME_ERSP)) {
+		/* Response already DMA'd to fd->rspaddr. */
 		iocb->u.nvme.rsp_pyld_len = le16_to_cpu(sts->nvme_rsp_pyld_len);
+	} else if ((state_flags & SF_FCP_RSP_DMA)) {
+		/*
+		 * Non-zero value in first 12 bytes of NVMe_RSP IU, treat this
+		 * as an error.
+		 */
+		iocb->u.nvme.rsp_pyld_len = 0;
+		fd->transferred_length = 0;
+		ql_dbg(ql_dbg_io, fcport->vha, 0x307a,
+			"Unexpected values in NVMe_RSP IU.\n");
+		logit = 1;
 	} else if (state_flags & SF_NVME_ERSP) {
 		uint32_t *inbuf, *outbuf;
 		uint16_t iter;
@@ -1954,16 +2126,28 @@ static void qla24xx_nvme_iocb_entry(scsi_qla_host_t *vha, struct req_que *req,
 		iter = iocb->u.nvme.rsp_pyld_len >> 2;
 		for (; iter; iter--)
 			*outbuf++ = swab32(*inbuf++);
-	} else { /* unhandled case */
-	    ql_log(ql_log_warn, fcport->vha, 0x503a,
-		"NVME-%s error. Unhandled state_flags of %x\n",
-		sp->name, state_flags);
 	}
 
-	fd->transferred_length = fd->payload_length -
-	    le32_to_cpu(sts->residual_len);
+	if (state_flags & SF_NVME_ERSP) {
+		struct nvme_fc_ersp_iu *rsp_iu = fd->rspaddr;
+		u32 tgt_xfer_len;
 
-	if (unlikely(comp_status != CS_COMPLETE))
+		tgt_xfer_len = be32_to_cpu(rsp_iu->xfrd_len);
+		if (fd->transferred_length != tgt_xfer_len) {
+			ql_dbg(ql_dbg_io, fcport->vha, 0x3079,
+				"Dropped frame(s) detected (sent/rcvd=%u/%u).\n",
+				tgt_xfer_len, fd->transferred_length);
+			logit = 1;
+		} else if (comp_status == CS_DATA_UNDERRUN) {
+			/*
+			 * Do not log if this is just an underflow and there
+			 * is no data loss.
+			 */
+			logit = 0;
+		}
+	}
+
+	if (unlikely(logit))
 		ql_log(ql_log_warn, fcport->vha, 0x5060,
 		   "NVME-%s ERR Handling - hdl=%x status(%x) tr_len:%x resid=%x  ox_id=%x\n",
 		   sp->name, sp->handle, comp_status,
@@ -2516,11 +2700,6 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
 		return;
 	}
 
-	if (sp->abort)
-		sp->aborted = 1;
-	else
-		sp->completed = 1;
-
 	if (sp->cmd_type != TYPE_SRB) {
 		req->outstanding_cmds[handle] = NULL;
 		ql_dbg(ql_dbg_io, vha, 0x3015,
@@ -3083,6 +3262,11 @@ void qla24xx_process_response_queue(struct scsi_qla_host *vha,
 			qla24xx_els_ct_entry(vha, rsp->req, pkt, ELS_IOCB_TYPE);
 			break;
 		case ABTS_RECV_24XX:
+			if (qla_ini_mode_enabled(vha)) {
+				qla24xx_purex_iocb(vha, pkt,
+				    qla24xx_process_abts);
+				break;
+			}
 			if (IS_QLA83XX(ha) || IS_QLA27XX(ha) ||
 			    IS_QLA28XX(ha)) {
 				/* ensure that the ATIO queue is empty */
@@ -3127,6 +3311,19 @@ void qla24xx_process_response_queue(struct scsi_qla_host *vha,
 			qla_ctrlvp_completed(vha, rsp->req,
 			    (struct vp_ctrl_entry_24xx *)pkt);
 			break;
+		case PUREX_IOCB_TYPE:
+		{
+			struct purex_entry_24xx *purex = (void *)pkt;
+
+			if (purex->els_frame_payload[3] != ELS_COMMAND_RDP) {
+				ql_dbg(ql_dbg_init, vha, 0x5091,
+				    "Discarding ELS Request opcode %#x...\n",
+				    purex->els_frame_payload[3]);
+				break;
+			}
+			qla24xx_purex_iocb(vha, pkt, qla24xx_process_purex_rdp);
+			break;
+		}
 		default:
 			/* Type Not Supported. */
 			ql_dbg(ql_dbg_async, vha, 0x5042,
@@ -3442,6 +3639,25 @@ qla2xxx_msix_rsp_q(int irq, void *dev_id)
 {
 	struct qla_hw_data *ha;
 	struct qla_qpair *qpair;
+
+	qpair = dev_id;
+	if (!qpair) {
+		ql_log(ql_log_info, NULL, 0x505b,
+		    "%s: NULL response queue pointer.\n", __func__);
+		return IRQ_NONE;
+	}
+	ha = qpair->hw;
+
+	queue_work(ha->wq, &qpair->q_work);
+
+	return IRQ_HANDLED;
+}
+
+irqreturn_t
+qla2xxx_msix_rsp_q_hs(int irq, void *dev_id)
+{
+	struct qla_hw_data *ha;
+	struct qla_qpair *qpair;
 	struct device_reg_24xx __iomem *reg;
 	unsigned long flags;
 
@@ -3453,13 +3669,10 @@ qla2xxx_msix_rsp_q(int irq, void *dev_id)
 	}
 	ha = qpair->hw;
 
-	/* Clear the interrupt, if enabled, for this response queue */
-	if (unlikely(!ha->flags.disable_msix_handshake)) {
-		reg = &ha->iobase->isp24;
-		spin_lock_irqsave(&ha->hardware_lock, flags);
-		WRT_REG_DWORD(&reg->hccr, HCCRX_CLR_RISC_INT);
-		spin_unlock_irqrestore(&ha->hardware_lock, flags);
-	}
+	reg = &ha->iobase->isp24;
+	spin_lock_irqsave(&ha->hardware_lock, flags);
+	WRT_REG_DWORD(&reg->hccr, HCCRX_CLR_RISC_INT);
+	spin_unlock_irqrestore(&ha->hardware_lock, flags);
 
 	queue_work(ha->wq, &qpair->q_work);
 
@@ -3478,6 +3691,7 @@ static const struct qla_init_msix_entry msix_entries[] = {
 	{ "rsp_q", qla24xx_msix_rsp_q },
 	{ "atio_q", qla83xx_msix_atio_q },
 	{ "qpair_multiq", qla2xxx_msix_rsp_q },
+	{ "qpair_multiq_hs", qla2xxx_msix_rsp_q_hs },
 };
 
 static const struct qla_init_msix_entry qla82xx_msix_entries[] = {
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 9e09964..4ed9043 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -117,10 +117,9 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 
 	ql_dbg(ql_dbg_mbx, vha, 0x1000, "Entered %s.\n", __func__);
 
-	if (ha->pdev->error_state > pci_channel_io_frozen) {
+	if (ha->pdev->error_state == pci_channel_io_perm_failure) {
 		ql_log(ql_log_warn, vha, 0x1001,
-		    "error_state is greater than pci_channel_io_frozen, "
-		    "exiting.\n");
+		    "PCI channel failed permanently, exiting.\n");
 		return QLA_FUNCTION_TIMEOUT;
 	}
 
@@ -643,30 +642,7 @@ qla2x00_load_ram(scsi_qla_host_t *vha, dma_addr_t req_dma, uint32_t risc_addr,
 	return rval;
 }
 
-#define	EXTENDED_BB_CREDITS	BIT_0
 #define	NVME_ENABLE_FLAG	BIT_3
-static inline uint16_t qla25xx_set_sfp_lr_dist(struct qla_hw_data *ha)
-{
-	uint16_t mb4 = BIT_0;
-
-	if (IS_QLA83XX(ha) || IS_QLA27XX(ha) || IS_QLA28XX(ha))
-		mb4 |= ha->long_range_distance << LR_DIST_FW_POS;
-
-	return mb4;
-}
-
-static inline uint16_t qla25xx_set_nvr_lr_dist(struct qla_hw_data *ha)
-{
-	uint16_t mb4 = BIT_0;
-
-	if (IS_QLA83XX(ha) || IS_QLA27XX(ha) || IS_QLA28XX(ha)) {
-		struct nvram_81xx *nv = ha->nvram;
-
-		mb4 |= LR_DIST_FW_FIELD(nv->enhanced_features);
-	}
-
-	return mb4;
-}
 
 /*
  * qla2x00_execute_fw
@@ -690,10 +666,14 @@ qla2x00_execute_fw(scsi_qla_host_t *vha, uint32_t risc_addr)
 	struct qla_hw_data *ha = vha->hw;
 	mbx_cmd_t mc;
 	mbx_cmd_t *mcp = &mc;
+	u8 semaphore = 0;
+#define EXE_FW_FORCE_SEMAPHORE BIT_7
+	u8 retry = 3;
 
 	ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1025,
 	    "Entered %s.\n", __func__);
 
+again:
 	mcp->mb[0] = MBC_EXECUTE_FIRMWARE;
 	mcp->out_mb = MBX_0;
 	mcp->in_mb = MBX_0;
@@ -703,25 +683,13 @@ qla2x00_execute_fw(scsi_qla_host_t *vha, uint32_t risc_addr)
 		mcp->mb[3] = 0;
 		mcp->mb[4] = 0;
 		mcp->mb[11] = 0;
-		ha->flags.using_lr_setting = 0;
-		if (IS_QLA25XX(ha) || IS_QLA81XX(ha) || IS_QLA83XX(ha) ||
-		    IS_QLA27XX(ha) || IS_QLA28XX(ha)) {
-			if (ql2xautodetectsfp) {
-				if (ha->flags.detected_lr_sfp) {
-					mcp->mb[4] |=
-					    qla25xx_set_sfp_lr_dist(ha);
-					ha->flags.using_lr_setting = 1;
-				}
-			} else {
-				struct nvram_81xx *nv = ha->nvram;
-				/* set LR distance if specified in nvram */
-				if (nv->enhanced_features &
-				    NEF_LR_DIST_ENABLE) {
-					mcp->mb[4] |=
-					    qla25xx_set_nvr_lr_dist(ha);
-					ha->flags.using_lr_setting = 1;
-				}
-			}
+
+		/* Enable BPM? */
+		if (ha->flags.lr_detected) {
+			mcp->mb[4] = BIT_0;
+			if (IS_BPM_RANGE_CAPABLE(ha))
+				mcp->mb[4] |=
+				    ha->lr_distance << LR_DIST_FW_POS;
 		}
 
 		if (ql2xnvmeenable && (IS_QLA27XX(ha) || IS_QLA28XX(ha)))
@@ -747,6 +715,9 @@ qla2x00_execute_fw(scsi_qla_host_t *vha, uint32_t risc_addr)
 		if (ha->flags.exchoffld_enabled)
 			mcp->mb[4] |= ENABLE_EXCHANGE_OFFLD;
 
+		if (semaphore)
+			mcp->mb[11] |= EXE_FW_FORCE_SEMAPHORE;
+
 		mcp->out_mb |= MBX_4 | MBX_3 | MBX_2 | MBX_1 | MBX_11;
 		mcp->in_mb |= MBX_3 | MBX_2 | MBX_1;
 	} else {
@@ -763,6 +734,15 @@ qla2x00_execute_fw(scsi_qla_host_t *vha, uint32_t risc_addr)
 	rval = qla2x00_mailbox_command(vha, mcp);
 
 	if (rval != QLA_SUCCESS) {
+		if (IS_QLA28XX(ha) && rval == QLA_COMMAND_ERROR &&
+		    mcp->mb[1] == 0x27 && retry) {
+			semaphore = 1;
+			retry--;
+			ql_dbg(ql_dbg_async, vha, 0x1026,
+			    "Exe FW: force semaphore.\n");
+			goto again;
+		}
+
 		ql_dbg(ql_dbg_mbx, vha, 0x1026,
 		    "Failed=%x mb[0]=%x.\n", rval, mcp->mb[0]);
 		return rval;
@@ -1137,11 +1117,13 @@ qla2x00_get_fw_version(scsi_qla_host_t *vha)
 		ha->fw_ddr_ram_start = (mcp->mb[23] << 16) | mcp->mb[22];
 		ha->fw_ddr_ram_end = (mcp->mb[25] << 16) | mcp->mb[24];
 		if (IS_QLA28XX(ha)) {
-			if (mcp->mb[16] & BIT_10) {
-				ql_log(ql_log_info, vha, 0xffff,
-				    "FW support secure flash updates\n");
+			if (mcp->mb[16] & BIT_10)
 				ha->flags.secure_fw = 1;
-			}
+
+			ql_log(ql_log_info, vha, 0xffff,
+			    "Secure Flash Update in FW: %s\n",
+			    (ha->flags.secure_fw) ? "Supported" :
+			    "Not Supported");
 		}
 	}
 
@@ -1405,17 +1387,20 @@ qla2x00_issue_iocb_timeout(scsi_qla_host_t *vha, void *buffer,
 	mbx_cmd_t	mc;
 	mbx_cmd_t	*mcp = &mc;
 
+	if (!vha->hw->flags.fw_started)
+		return QLA_INVALID_COMMAND;
+
 	ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1038,
 	    "Entered %s.\n", __func__);
 
 	mcp->mb[0] = MBC_IOCB_COMMAND_A64;
 	mcp->mb[1] = 0;
-	mcp->mb[2] = MSW(phys_addr);
-	mcp->mb[3] = LSW(phys_addr);
+	mcp->mb[2] = MSW(LSD(phys_addr));
+	mcp->mb[3] = LSW(LSD(phys_addr));
 	mcp->mb[6] = MSW(MSD(phys_addr));
 	mcp->mb[7] = LSW(MSD(phys_addr));
 	mcp->out_mb = MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
-	mcp->in_mb = MBX_2|MBX_0;
+	mcp->in_mb = MBX_1|MBX_0;
 	mcp->tov = tov;
 	mcp->flags = 0;
 	rval = qla2x00_mailbox_command(vha, mcp);
@@ -1424,13 +1409,14 @@ qla2x00_issue_iocb_timeout(scsi_qla_host_t *vha, void *buffer,
 		/*EMPTY*/
 		ql_dbg(ql_dbg_mbx, vha, 0x1039, "Failed=%x.\n", rval);
 	} else {
-		sts_entry_t *sts_entry = (sts_entry_t *) buffer;
+		sts_entry_t *sts_entry = buffer;
 
 		/* Mask reserved bits. */
 		sts_entry->entry_status &=
 		    IS_FWI2_CAPABLE(vha->hw) ? RF_MASK_24XX : RF_MASK;
 		ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x103a,
-		    "Done %s.\n", __func__);
+		    "Done %s (status=%x).\n", __func__,
+		    sts_entry->entry_status);
 	}
 
 	return rval;
@@ -1475,7 +1461,7 @@ qla2x00_abort_command(srb_t *sp)
 	ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x103b,
 	    "Entered %s.\n", __func__);
 
-	if (vha->flags.qpairs_available && sp->qpair)
+	if (sp->qpair)
 		req = sp->qpair->req;
 	else
 		req = vha->req;
@@ -2045,6 +2031,57 @@ qla2x00_get_port_database(scsi_qla_host_t *vha, fc_port_t *fcport, uint8_t opt)
 	return rval;
 }
 
+int
+qla24xx_get_port_database(scsi_qla_host_t *vha, u16 nport_handle,
+	struct port_database_24xx *pdb)
+{
+	mbx_cmd_t mc;
+	mbx_cmd_t *mcp = &mc;
+	dma_addr_t pdb_dma;
+	int rval;
+
+	ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1115,
+	    "Entered %s.\n", __func__);
+
+	memset(pdb, 0, sizeof(*pdb));
+
+	pdb_dma = dma_map_single(&vha->hw->pdev->dev, pdb,
+	    sizeof(*pdb), DMA_FROM_DEVICE);
+	if (!pdb_dma) {
+		ql_log(ql_log_warn, vha, 0x1116, "Failed to map dma buffer.\n");
+		return QLA_MEMORY_ALLOC_FAILED;
+	}
+
+	mcp->mb[0] = MBC_GET_PORT_DATABASE;
+	mcp->mb[1] = nport_handle;
+	mcp->mb[2] = MSW(LSD(pdb_dma));
+	mcp->mb[3] = LSW(LSD(pdb_dma));
+	mcp->mb[6] = MSW(MSD(pdb_dma));
+	mcp->mb[7] = LSW(MSD(pdb_dma));
+	mcp->mb[9] = 0;
+	mcp->mb[10] = 0;
+	mcp->out_mb = MBX_10|MBX_9|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
+	mcp->in_mb = MBX_1|MBX_0;
+	mcp->buf_size = sizeof(*pdb);
+	mcp->flags = MBX_DMA_IN;
+	mcp->tov = vha->hw->login_timeout * 2;
+	rval = qla2x00_mailbox_command(vha, mcp);
+
+	if (rval != QLA_SUCCESS) {
+		ql_dbg(ql_dbg_mbx, vha, 0x111a,
+		    "Failed=%x mb[0]=%x mb[1]=%x.\n",
+		    rval, mcp->mb[0], mcp->mb[1]);
+	} else {
+		ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x111b,
+		    "Done %s.\n", __func__);
+	}
+
+	dma_unmap_single(&vha->hw->pdev->dev, pdb_dma,
+	    sizeof(*pdb), DMA_FROM_DEVICE);
+
+	return rval;
+}
+
 /*
  * qla2x00_get_firmware_state
  *	Get adapter firmware state.
@@ -2384,7 +2421,7 @@ qla24xx_login_fabric(scsi_qla_host_t *vha, uint16_t loop_id, uint8_t domain,
 
 	lg->entry_type = LOGINOUT_PORT_IOCB_TYPE;
 	lg->entry_count = 1;
-	lg->handle = MAKE_HANDLE(req->id, lg->handle);
+	lg->handle = make_handle(req->id, lg->handle);
 	lg->nport_handle = cpu_to_le16(loop_id);
 	lg->control_flags = cpu_to_le16(LCF_COMMAND_PLOGI);
 	if (opt & BIT_0)
@@ -2654,7 +2691,7 @@ qla24xx_fabric_logout(scsi_qla_host_t *vha, uint16_t loop_id, uint8_t domain,
 	req = vha->req;
 	lg->entry_type = LOGINOUT_PORT_IOCB_TYPE;
 	lg->entry_count = 1;
-	lg->handle = MAKE_HANDLE(req->id, lg->handle);
+	lg->handle = make_handle(req->id, lg->handle);
 	lg->nport_handle = cpu_to_le16(loop_id);
 	lg->control_flags =
 	    cpu_to_le16(LCF_COMMAND_LOGO|LCF_IMPL_LOGO|
@@ -3060,18 +3097,19 @@ qla24xx_get_isp_stats(scsi_qla_host_t *vha, struct link_statistics *stats,
 	int rval;
 	mbx_cmd_t mc;
 	mbx_cmd_t *mcp = &mc;
-	uint32_t *iter, dwords;
+	uint32_t *iter = (void *)stats;
+	ushort dwords = sizeof(*stats)/sizeof(*iter);
 
 	ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1088,
 	    "Entered %s.\n", __func__);
 
 	memset(&mc, 0, sizeof(mc));
 	mc.mb[0] = MBC_GET_LINK_PRIV_STATS;
-	mc.mb[2] = MSW(stats_dma);
-	mc.mb[3] = LSW(stats_dma);
+	mc.mb[2] = MSW(LSD(stats_dma));
+	mc.mb[3] = LSW(LSD(stats_dma));
 	mc.mb[6] = MSW(MSD(stats_dma));
 	mc.mb[7] = LSW(MSD(stats_dma));
-	mc.mb[8] = sizeof(struct link_statistics) / 4;
+	mc.mb[8] = dwords;
 	mc.mb[9] = cpu_to_le16(vha->vp_idx);
 	mc.mb[10] = cpu_to_le16(options);
 
@@ -3086,8 +3124,6 @@ qla24xx_get_isp_stats(scsi_qla_host_t *vha, struct link_statistics *stats,
 			ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x108a,
 			    "Done %s.\n", __func__);
 			/* Re-endianize - firmware data is le32. */
-			dwords = sizeof(struct link_statistics) / 4;
-			iter = &stats->link_fail_cnt;
 			for ( ; dwords--; iter++)
 				le32_to_cpus(iter);
 		}
@@ -3145,9 +3181,9 @@ qla24xx_abort_command(srb_t *sp)
 
 	abt->entry_type = ABORT_IOCB_TYPE;
 	abt->entry_count = 1;
-	abt->handle = MAKE_HANDLE(req->id, abt->handle);
+	abt->handle = make_handle(req->id, abt->handle);
 	abt->nport_handle = cpu_to_le16(fcport->loop_id);
-	abt->handle_to_abort = MAKE_HANDLE(req->id, handle);
+	abt->handle_to_abort = make_handle(req->id, handle);
 	abt->port_id[0] = fcport->d_id.b.al_pa;
 	abt->port_id[1] = fcport->d_id.b.area;
 	abt->port_id[2] = fcport->d_id.b.domain;
@@ -3224,7 +3260,7 @@ __qla24xx_issue_tmf(char *name, uint32_t type, struct fc_port *fcport,
 
 	tsk->p.tsk.entry_type = TSK_MGMT_IOCB_TYPE;
 	tsk->p.tsk.entry_count = 1;
-	tsk->p.tsk.handle = MAKE_HANDLE(req->id, tsk->p.tsk.handle);
+	tsk->p.tsk.handle = make_handle(req->id, tsk->p.tsk.handle);
 	tsk->p.tsk.nport_handle = cpu_to_le16(fcport->loop_id);
 	tsk->p.tsk.timeout = cpu_to_le16(ha->r_a_tov / 10 * 2);
 	tsk->p.tsk.control_flags = cpu_to_le32(type);
@@ -3888,11 +3924,29 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha,
 				fcport->scan_state = QLA_FCPORT_SCAN;
 				fcport->n2n_flag = 0;
 			}
+			id.b24 = 0;
+			if (wwn_to_u64(vha->port_name) >
+			    wwn_to_u64(rptid_entry->u.f1.port_name)) {
+				vha->d_id.b24 = 0;
+				vha->d_id.b.al_pa = 1;
+				ha->flags.n2n_bigger = 1;
+
+				id.b.al_pa = 2;
+				ql_dbg(ql_dbg_async, vha, 0x5075,
+				    "Format 1: assign local id %x remote id %x\n",
+				    vha->d_id.b24, id.b24);
+			} else {
+				ql_dbg(ql_dbg_async, vha, 0x5075,
+				    "Format 1: Remote login - Waiting for WWPN %8phC.\n",
+				    rptid_entry->u.f1.port_name);
+				ha->flags.n2n_bigger = 0;
+			}
 
 			fcport = qla2x00_find_fcport_by_wwpn(vha,
 			    rptid_entry->u.f1.port_name, 1);
 			spin_unlock_irqrestore(&vha->hw->tgt.sess_lock, flags);
 
+
 			if (fcport) {
 				fcport->plogi_nack_done_deadline = jiffies + HZ;
 				fcport->dm_login_expire = jiffies + 2*HZ;
@@ -3903,6 +3957,11 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha,
 				if (vha->flags.nvme_enabled)
 					fcport->fc4_type |= FS_FC4TYPE_NVME;
 
+				if (wwn_to_u64(vha->port_name) >
+				    wwn_to_u64(fcport->port_name)) {
+					fcport->d_id = id;
+				}
+
 				switch (fcport->disc_state) {
 				case DSC_DELETED:
 					set_bit(RELOGIN_NEEDED,
@@ -3915,25 +3974,6 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha,
 					break;
 				}
 			} else {
-				id.b24 = 0;
-				if (wwn_to_u64(vha->port_name) >
-				    wwn_to_u64(rptid_entry->u.f1.port_name)) {
-					vha->d_id.b24 = 0;
-					vha->d_id.b.al_pa = 1;
-					ha->flags.n2n_bigger = 1;
-					ha->flags.n2n_ae = 0;
-
-					id.b.al_pa = 2;
-					ql_dbg(ql_dbg_async, vha, 0x5075,
-					    "Format 1: assign local id %x remote id %x\n",
-					    vha->d_id.b24, id.b24);
-				} else {
-					ql_dbg(ql_dbg_async, vha, 0x5075,
-					    "Format 1: Remote login - Waiting for WWPN %8phC.\n",
-					    rptid_entry->u.f1.port_name);
-					ha->flags.n2n_bigger = 0;
-					ha->flags.n2n_ae = 1;
-				}
 				qla24xx_post_newsess_work(vha, &id,
 				    rptid_entry->u.f1.port_name,
 				    rptid_entry->u.f1.node_name,
@@ -4827,6 +4867,101 @@ qla24xx_get_port_login_templ(scsi_qla_host_t *vha, dma_addr_t buf_dma,
 	return rval;
 }
 
+int
+qla25xx_set_els_cmds_supported(scsi_qla_host_t *vha)
+{
+	int rval;
+	mbx_cmd_t mc;
+	mbx_cmd_t *mcp = &mc;
+	uint8_t *els_cmd_map;
+	dma_addr_t els_cmd_map_dma;
+	uint cmd_opcode = ELS_COMMAND_RDP;
+	uint index = cmd_opcode / 8;
+	uint bit = cmd_opcode % 8;
+	struct qla_hw_data *ha = vha->hw;
+
+	if (!IS_QLA25XX(ha) && !IS_QLA2031(ha) && !IS_QLA27XX(ha))
+		return QLA_SUCCESS;
+
+	ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1197,
+	    "Entered %s.\n", __func__);
+
+	els_cmd_map = dma_alloc_coherent(&ha->pdev->dev, ELS_CMD_MAP_SIZE,
+	    &els_cmd_map_dma, GFP_KERNEL);
+	if (!els_cmd_map) {
+		ql_log(ql_log_warn, vha, 0x7101,
+		    "Failed to allocate RDP els command param.\n");
+		return QLA_MEMORY_ALLOC_FAILED;
+	}
+
+	els_cmd_map[index] |= 1 << bit;
+
+	mcp->mb[0] = MBC_SET_RNID_PARAMS;
+	mcp->mb[1] = RNID_TYPE_ELS_CMD << 8;
+	mcp->mb[2] = MSW(LSD(els_cmd_map_dma));
+	mcp->mb[3] = LSW(LSD(els_cmd_map_dma));
+	mcp->mb[6] = MSW(MSD(els_cmd_map_dma));
+	mcp->mb[7] = LSW(MSD(els_cmd_map_dma));
+	mcp->out_mb = MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
+	mcp->in_mb = MBX_1|MBX_0;
+	mcp->tov = MBX_TOV_SECONDS;
+	mcp->flags = MBX_DMA_OUT;
+	mcp->buf_size = ELS_CMD_MAP_SIZE;
+	rval = qla2x00_mailbox_command(vha, mcp);
+
+	if (rval != QLA_SUCCESS) {
+		ql_dbg(ql_dbg_mbx, vha, 0x118d,
+		    "Failed=%x (%x,%x).\n", rval, mcp->mb[0], mcp->mb[1]);
+	} else {
+		ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x118c,
+		    "Done %s.\n", __func__);
+	}
+
+	dma_free_coherent(&ha->pdev->dev, DMA_POOL_SIZE,
+	   els_cmd_map, els_cmd_map_dma);
+
+	return rval;
+}
+
+int
+qla24xx_get_buffer_credits(scsi_qla_host_t *vha, struct buffer_credit_24xx *bbc,
+	dma_addr_t bbc_dma)
+{
+	mbx_cmd_t mc;
+	mbx_cmd_t *mcp = &mc;
+	int rval;
+
+	if (!IS_FWI2_CAPABLE(vha->hw))
+		return QLA_FUNCTION_FAILED;
+
+	ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x118e,
+	    "Entered %s.\n", __func__);
+
+	mcp->mb[0] = MBC_GET_RNID_PARAMS;
+	mcp->mb[1] = RNID_BUFFER_CREDITS << 8;
+	mcp->mb[2] = MSW(LSD(bbc_dma));
+	mcp->mb[3] = LSW(LSD(bbc_dma));
+	mcp->mb[6] = MSW(MSD(bbc_dma));
+	mcp->mb[7] = LSW(MSD(bbc_dma));
+	mcp->mb[8] = sizeof(*bbc) / sizeof(*bbc->parameter);
+	mcp->out_mb = MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
+	mcp->in_mb = MBX_1|MBX_0;
+	mcp->buf_size = sizeof(*bbc);
+	mcp->flags = MBX_DMA_IN;
+	mcp->tov = MBX_TOV_SECONDS;
+	rval = qla2x00_mailbox_command(vha, mcp);
+
+	if (rval != QLA_SUCCESS) {
+		ql_dbg(ql_dbg_mbx, vha, 0x118f,
+		    "Failed=%x mb[0]=%x,%x.\n", rval, mcp->mb[0], mcp->mb[1]);
+	} else {
+		ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1190,
+		    "Done %s.\n", __func__);
+	}
+
+	return rval;
+}
+
 static int
 qla2x00_read_asic_temperature(scsi_qla_host_t *vha, uint16_t *temp)
 {
@@ -4880,8 +5015,8 @@ qla2x00_read_sfp(scsi_qla_host_t *vha, dma_addr_t sfp_dma, uint8_t *sfp,
 
 	mcp->mb[0] = MBC_READ_SFP;
 	mcp->mb[1] = dev;
-	mcp->mb[2] = MSW(sfp_dma);
-	mcp->mb[3] = LSW(sfp_dma);
+	mcp->mb[2] = MSW(LSD(sfp_dma));
+	mcp->mb[3] = LSW(LSD(sfp_dma));
 	mcp->mb[6] = MSW(MSD(sfp_dma));
 	mcp->mb[7] = LSW(MSD(sfp_dma));
 	mcp->mb[8] = len;
@@ -4934,8 +5069,8 @@ qla2x00_write_sfp(scsi_qla_host_t *vha, dma_addr_t sfp_dma, uint8_t *sfp,
 
 	mcp->mb[0] = MBC_WRITE_SFP;
 	mcp->mb[1] = dev;
-	mcp->mb[2] = MSW(sfp_dma);
-	mcp->mb[3] = LSW(sfp_dma);
+	mcp->mb[2] = MSW(LSD(sfp_dma));
+	mcp->mb[3] = LSW(LSD(sfp_dma));
 	mcp->mb[6] = MSW(MSD(sfp_dma));
 	mcp->mb[7] = LSW(MSD(sfp_dma));
 	mcp->mb[8] = len;
@@ -5170,10 +5305,11 @@ qla2x00_echo_test(scsi_qla_host_t *vha, struct msg_echo_lb *mreq,
 		mcp->out_mb |= MBX_2;
 
 	mcp->in_mb = MBX_0;
-	if (IS_QLA24XX_TYPE(ha) || IS_QLA25XX(ha) ||
-	    IS_CNA_CAPABLE(ha) || IS_QLA2031(ha))
+	if (IS_CNA_CAPABLE(ha) || IS_QLA24XX_TYPE(ha) || IS_QLA25XX(ha) ||
+	    IS_QLA2031(ha) || IS_QLA27XX(ha) || IS_QLA28XX(ha))
 		mcp->in_mb |= MBX_1;
-	if (IS_CNA_CAPABLE(ha) || IS_QLA2031(ha))
+	if (IS_CNA_CAPABLE(ha) || IS_QLA2031(ha) || IS_QLA27XX(ha) ||
+	    IS_QLA28XX(ha))
 		mcp->in_mb |= MBX_3;
 
 	mcp->tov = MBX_TOV_SECONDS;
@@ -5407,6 +5543,15 @@ qla2x00_get_data_rate(scsi_qla_host_t *vha)
 		ql_dbg(ql_dbg_mbx, vha, 0x1107,
 		    "Failed=%x mb[0]=%x.\n", rval, mcp->mb[0]);
 	} else {
+		if (mcp->mb[1] != 0x7)
+			ha->link_data_rate = mcp->mb[1];
+
+		if (IS_QLA83XX(ha) || IS_QLA27XX(ha) || IS_QLA28XX(ha)) {
+			if (mcp->mb[4] & BIT_0)
+				ql_log(ql_log_info, vha, 0x11a2,
+				    "FEC=enabled (data rate).\n");
+		}
+
 		ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1108,
 		    "Done %s.\n", __func__);
 		if (mcp->mb[1] != 0x7)
@@ -6688,3 +6833,60 @@ int qla2xxx_read_remote_register(scsi_qla_host_t *vha, uint32_t addr,
 
 	return rval;
 }
+
+int
+ql26xx_led_config(scsi_qla_host_t *vha, uint16_t options, uint16_t *led)
+{
+	struct qla_hw_data *ha = vha->hw;
+	mbx_cmd_t mc;
+	mbx_cmd_t *mcp = &mc;
+	int rval;
+
+	if (!IS_QLA2031(ha) && !IS_QLA27XX(ha) && !IS_QLA28XX(ha))
+		return QLA_FUNCTION_FAILED;
+
+	ql_dbg(ql_dbg_mbx, vha, 0x7070, "Entered %s (options=%x).\n",
+	    __func__, options);
+
+	mcp->mb[0] = MBC_SET_GET_FC_LED_CONFIG;
+	mcp->mb[1] = options;
+	mcp->out_mb = MBX_1|MBX_0;
+	mcp->in_mb = MBX_1|MBX_0;
+	if (options & BIT_0) {
+		if (options & BIT_1) {
+			mcp->mb[2] = led[2];
+			mcp->out_mb |= MBX_2;
+		}
+		if (options & BIT_2) {
+			mcp->mb[3] = led[0];
+			mcp->out_mb |= MBX_3;
+		}
+		if (options & BIT_3) {
+			mcp->mb[4] = led[1];
+			mcp->out_mb |= MBX_4;
+		}
+	} else {
+		mcp->in_mb |= MBX_4|MBX_3|MBX_2;
+	}
+	mcp->tov = MBX_TOV_SECONDS;
+	mcp->flags = 0;
+	rval = qla2x00_mailbox_command(vha, mcp);
+	if (rval) {
+		ql_dbg(ql_dbg_mbx, vha, 0x7071, "Failed %s %x (mb=%x,%x)\n",
+		    __func__, rval, mcp->mb[0], mcp->mb[1]);
+		return rval;
+	}
+
+	if (options & BIT_0) {
+		ha->beacon_blink_led = 0;
+		ql_dbg(ql_dbg_mbx, vha, 0x7072, "Done %s\n", __func__);
+	} else {
+		led[2] = mcp->mb[2];
+		led[0] = mcp->mb[3];
+		led[1] = mcp->mb[4];
+		ql_dbg(ql_dbg_mbx, vha, 0x7073, "Done %s (led=%x,%x,%x)\n",
+		    __func__, led[0], led[1], led[2]);
+	}
+
+	return rval;
+}
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index 8ae639d..d82e92d 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -361,6 +361,13 @@ qla2x00_do_dpc_vp(scsi_qla_host_t *vha)
 		}
 	}
 
+	if (test_bit(PROCESS_PUREX_IOCB, &vha->dpc_flags)) {
+		if (atomic_read(&vha->loop_state) == LOOP_READY) {
+			qla24xx_process_purex_list(&vha->purex_list);
+			clear_bit(PROCESS_PUREX_IOCB, &vha->dpc_flags);
+		}
+	}
+
 	if (test_bit(FCPORT_UPDATE_NEEDED, &vha->dpc_flags)) {
 		ql_dbg(ql_dbg_dpc, vha, 0x4016,
 		    "FCPort update scheduled.\n");
@@ -509,6 +516,9 @@ qla24xx_create_vhost(struct fc_vport *fc_vport)
 	vha->mgmt_svr_loop_id = qla2x00_reserve_mgmt_server_loop_id(vha);
 
 	vha->dpc_flags = 0L;
+	ha->dpc_active = 0;
+	set_bit(REGISTER_FDMI_NEEDED, &vha->dpc_flags);
+	set_bit(REGISTER_FC4_NEEDED, &vha->dpc_flags);
 
 	/*
 	 * To fix the issue of processing a parent's RSCN for the vport before
@@ -886,7 +896,8 @@ qla25xx_create_rsp_que(struct qla_hw_data *ha, uint16_t options,
 	    rsp->rsp_q_out);
 
 	ret = qla25xx_request_irq(ha, qpair, qpair->msix,
-	    QLA_MSIX_QPAIR_MULTIQ_RSP_Q);
+		ha->flags.disable_msix_handshake ?
+		QLA_MSIX_QPAIR_MULTIQ_RSP_Q : QLA_MSIX_QPAIR_MULTIQ_RSP_Q_HS);
 	if (ret)
 		goto que_failed;
 
diff --git a/drivers/scsi/qla2xxx/qla_mr.c b/drivers/scsi/qla2xxx/qla_mr.c
index cad1fc2..df99911 100644
--- a/drivers/scsi/qla2xxx/qla_mr.c
+++ b/drivers/scsi/qla2xxx/qla_mr.c
@@ -53,10 +53,9 @@ qlafx00_mailbox_command(scsi_qla_host_t *vha, struct mbx_cmd_32 *mcp)
 	struct qla_hw_data *ha = vha->hw;
 	scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);
 
-	if (ha->pdev->error_state > pci_channel_io_frozen) {
+	if (ha->pdev->error_state == pci_channel_io_perm_failure) {
 		ql_log(ql_log_warn, vha, 0x115c,
-		    "error_state is greater than pci_channel_io_frozen, "
-		    "exiting.\n");
+		    "PCI channel failed permanently, exiting.\n");
 		return QLA_FUNCTION_TIMEOUT;
 	}
 
@@ -3136,7 +3135,7 @@ qlafx00_start_scsi(srb_t *sp)
 
 	memset(&lcmd_pkt, 0, REQUEST_ENTRY_SIZE);
 
-	lcmd_pkt.handle = MAKE_HANDLE(req->id, sp->handle);
+	lcmd_pkt.handle = make_handle(req->id, sp->handle);
 	lcmd_pkt.reserved_0 = 0;
 	lcmd_pkt.port_path_ctrl = 0;
 	lcmd_pkt.reserved_1 = 0;
@@ -3206,7 +3205,7 @@ qlafx00_tm_iocb(srb_t *sp, struct tsk_mgmt_entry_fx00 *ptm_iocb)
 	memset(&tm_iocb, 0, sizeof(struct tsk_mgmt_entry_fx00));
 	tm_iocb.entry_type = TSK_MGMT_IOCB_TYPE_FX00;
 	tm_iocb.entry_count = 1;
-	tm_iocb.handle = cpu_to_le32(MAKE_HANDLE(req->id, sp->handle));
+	tm_iocb.handle = cpu_to_le32(make_handle(req->id, sp->handle));
 	tm_iocb.reserved_0 = 0;
 	tm_iocb.tgt_id = cpu_to_le16(sp->fcport->tgt_id);
 	tm_iocb.control_flags = cpu_to_le32(fxio->u.tmf.flags);
@@ -3232,9 +3231,9 @@ qlafx00_abort_iocb(srb_t *sp, struct abort_iocb_entry_fx00 *pabt_iocb)
 	memset(&abt_iocb, 0, sizeof(struct abort_iocb_entry_fx00));
 	abt_iocb.entry_type = ABORT_IOCB_TYPE_FX00;
 	abt_iocb.entry_count = 1;
-	abt_iocb.handle = cpu_to_le32(MAKE_HANDLE(req->id, sp->handle));
+	abt_iocb.handle = cpu_to_le32(make_handle(req->id, sp->handle));
 	abt_iocb.abort_handle =
-	    cpu_to_le32(MAKE_HANDLE(req->id, fxio->u.abt.cmd_hndl));
+	    cpu_to_le32(make_handle(req->id, fxio->u.abt.cmd_hndl));
 	abt_iocb.tgt_id_sts = cpu_to_le16(sp->fcport->tgt_id);
 	abt_iocb.req_que_no = cpu_to_le16(req->id);
 
diff --git a/drivers/scsi/qla2xxx/qla_nvme.c b/drivers/scsi/qla2xxx/qla_nvme.c
index bfcd02f..4886d24 100644
--- a/drivers/scsi/qla2xxx/qla_nvme.c
+++ b/drivers/scsi/qla2xxx/qla_nvme.c
@@ -413,7 +413,7 @@ static inline int qla2x00_start_nvme_mq(srb_t *sp)
 	req->cnt -= req_cnt;
 
 	cmd_pkt = (struct cmd_nvme *)req->ring_ptr;
-	cmd_pkt->handle = MAKE_HANDLE(req->id, handle);
+	cmd_pkt->handle = make_handle(req->id, handle);
 
 	/* Zero out remaining portion of packet. */
 	clr_ptr = (uint32_t *)cmd_pkt + 2;
@@ -610,7 +610,6 @@ static void qla_nvme_remoteport_delete(struct nvme_fc_remote_port *rport)
 }
 
 static struct nvme_fc_port_template qla_nvme_fc_transport = {
-	.module	= THIS_MODULE,
 	.localport_delete = qla_nvme_localport_delete,
 	.remoteport_delete = qla_nvme_remoteport_delete,
 	.create_queue   = qla_nvme_alloc_queue,
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 7a94e11..d190db5 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -113,7 +113,8 @@ module_param(ql2xfdmienable, int, S_IRUGO|S_IWUSR);
 module_param_named(fdmi, ql2xfdmienable, int, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(ql2xfdmienable,
 		"Enables FDMI registrations. "
-		"0 - no FDMI. Default is 1 - perform FDMI.");
+		"0 - no FDMI registrations. "
+		"1 - provide FDMI registrations (default).");
 
 #define MAX_Q_DEPTH	64
 static int ql2xmaxqdepth = MAX_Q_DEPTH;
@@ -122,11 +123,7 @@ MODULE_PARM_DESC(ql2xmaxqdepth,
 		"Maximum queue depth to set for each LUN. "
 		"Default is 64.");
 
-#if (IS_ENABLED(CONFIG_NVME_FC))
-int ql2xenabledif;
-#else
 int ql2xenabledif = 2;
-#endif
 module_param(ql2xenabledif, int, S_IRUGO);
 MODULE_PARM_DESC(ql2xenabledif,
 		" Enable T10-CRC-DIF:\n"
@@ -306,6 +303,22 @@ MODULE_PARM_DESC(ql2xdifbundlinginternalbuffers,
     "0 (Default). Based on check.\n"
     "1 Force using internal buffers\n");
 
+int ql2xsmartsan;
+module_param(ql2xsmartsan, int, 0444);
+module_param_named(smartsan, ql2xsmartsan, int, 0444);
+MODULE_PARM_DESC(ql2xsmartsan,
+		"Send SmartSAN Management Attributes for FDMI Registration."
+		" Default is 0 - No SmartSAN registration,"
+		" 1 - Register SmartSAN Management Attributes.");
+
+int ql2xrdpenable;
+module_param(ql2xrdpenable, int, 0444);
+module_param_named(rdpenable, ql2xrdpenable, int, 0444);
+MODULE_PARM_DESC(ql2xrdpenable,
+		"Enables RDP responses. "
+		"0 - no RDP responses (default). "
+		"1 - provide RDP responses.");
+
 static void qla2x00_clear_drv_active(struct qla_hw_data *);
 static void qla2x00_free_device(scsi_qla_host_t *);
 static int qla2xxx_map_queues(struct Scsi_Host *shost);
@@ -583,6 +596,9 @@ qla24xx_pci_info_str(struct scsi_qla_host *vha, char *str, size_t str_len)
 		case 3:
 			speed_str = "8.0GT/s";
 			break;
+		case 4:
+			speed_str = "16.0GT/s";
+			break;
 		default:
 			speed_str = "<unknown>";
 			break;
@@ -1253,17 +1269,6 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 		return SUCCESS;
 
 	spin_lock_irqsave(qpair->qp_lock_ptr, flags);
-	if (sp->completed) {
-		spin_unlock_irqrestore(qpair->qp_lock_ptr, flags);
-		return SUCCESS;
-	}
-
-	if (sp->abort || sp->aborted) {
-		spin_unlock_irqrestore(qpair->qp_lock_ptr, flags);
-		return FAILED;
-	}
-
-	sp->abort = 1;
 	sp->comp = &comp;
 	spin_unlock_irqrestore(qpair->qp_lock_ptr, flags);
 
@@ -1688,6 +1693,10 @@ qla2x00_loop_reset(scsi_qla_host_t *vha)
 	return QLA_SUCCESS;
 }
 
+/*
+ * The caller must ensure that no completion interrupts will happen
+ * while this function is in progress.
+ */
 static void qla2x00_abort_srb(struct qla_qpair *qp, srb_t *sp, const int res,
 			      unsigned long *flags)
 	__releases(qp->qp_lock_ptr)
@@ -1696,10 +1705,13 @@ static void qla2x00_abort_srb(struct qla_qpair *qp, srb_t *sp, const int res,
 	DECLARE_COMPLETION_ONSTACK(comp);
 	scsi_qla_host_t *vha = qp->vha;
 	struct qla_hw_data *ha = vha->hw;
+	struct scsi_cmnd *cmd = GET_CMD_SP(sp);
 	int rval;
 	bool ret_cmd;
 	uint32_t ratov_j;
 
+	lockdep_assert_held(qp->qp_lock_ptr);
+
 	if (qla2x00_chip_is_down(vha)) {
 		sp->done(sp, res);
 		return;
@@ -1715,7 +1727,6 @@ static void qla2x00_abort_srb(struct qla_qpair *qp, srb_t *sp, const int res,
 		}
 
 		sp->comp = &comp;
-		sp->abort =  1;
 		spin_unlock_irqrestore(qp->qp_lock_ptr, *flags);
 
 		rval = ha->isp_ops->abort_command(sp);
@@ -1739,13 +1750,17 @@ static void qla2x00_abort_srb(struct qla_qpair *qp, srb_t *sp, const int res,
 		}
 
 		spin_lock_irqsave(qp->qp_lock_ptr, *flags);
-		if (ret_cmd && (!sp->completed || !sp->aborted))
+		if (ret_cmd && blk_mq_request_started(cmd->request))
 			sp->done(sp, res);
 	} else {
 		sp->done(sp, res);
 	}
 }
 
+/*
+ * The caller must ensure that no completion interrupts will happen
+ * while this function is in progress.
+ */
 static void
 __qla2x00_abort_all_cmds(struct qla_qpair *qp, int res)
 {
@@ -1792,6 +1807,10 @@ __qla2x00_abort_all_cmds(struct qla_qpair *qp, int res)
 	spin_unlock_irqrestore(qp->qp_lock_ptr, flags);
 }
 
+/*
+ * The caller must ensure that no completion interrupts will happen
+ * while this function is in progress.
+ */
 void
 qla2x00_abort_all_cmds(scsi_qla_host_t *vha, int res)
 {
@@ -2285,7 +2304,7 @@ static struct isp_operations qla81xx_isp_ops = {
 	.config_rings		= qla24xx_config_rings,
 	.reset_adapter		= qla24xx_reset_adapter,
 	.nvram_config		= qla81xx_nvram_config,
-	.update_fw_options	= qla81xx_update_fw_options,
+	.update_fw_options	= qla24xx_update_fw_options,
 	.load_risc		= qla81xx_load_risc,
 	.pci_info_str		= qla24xx_pci_info_str,
 	.fw_version_str		= qla24xx_fw_version_str,
@@ -2402,7 +2421,7 @@ static struct isp_operations qla83xx_isp_ops = {
 	.config_rings		= qla24xx_config_rings,
 	.reset_adapter		= qla24xx_reset_adapter,
 	.nvram_config		= qla81xx_nvram_config,
-	.update_fw_options	= qla81xx_update_fw_options,
+	.update_fw_options	= qla24xx_update_fw_options,
 	.load_risc		= qla81xx_load_risc,
 	.pci_info_str		= qla24xx_pci_info_str,
 	.fw_version_str		= qla24xx_fw_version_str,
@@ -3439,13 +3458,6 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	if (test_bit(UNLOADING, &base_vha->dpc_flags))
 		return -ENODEV;
 
-	if (ha->flags.detected_lr_sfp) {
-		ql_log(ql_log_info, base_vha, 0xffff,
-		    "Reset chip to pick up LR SFP setting\n");
-		set_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags);
-		qla2xxx_wake_dpc(base_vha);
-	}
-
 	return 0;
 
 probe_failed:
@@ -3806,6 +3818,20 @@ qla2x00_remove_one(struct pci_dev *pdev)
 	pci_disable_device(pdev);
 }
 
+static inline void
+qla24xx_free_purex_list(struct purex_list *list)
+{
+	struct list_head *item, *next;
+	ulong flags;
+
+	spin_lock_irqsave(&list->lock, flags);
+	list_for_each_safe(item, next, &list->head) {
+		list_del(item);
+		kfree(list_entry(item, struct purex_item, list));
+	}
+	spin_unlock_irqrestore(&list->lock, flags);
+}
+
 static void
 qla2x00_free_device(scsi_qla_host_t *vha)
 {
@@ -3838,6 +3864,8 @@ qla2x00_free_device(scsi_qla_host_t *vha)
 	}
 
 
+	qla24xx_free_purex_list(&vha->purex_list);
+
 	qla2x00_mem_free(ha);
 
 	qla82xx_md_free(vha);
@@ -3907,19 +3935,6 @@ void qla2x00_mark_device_lost(scsi_qla_host_t *vha, fc_port_t *fcport,
 	set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
 }
 
-/*
- * qla2x00_mark_all_devices_lost
- *	Updates fcport state when device goes offline.
- *
- * Input:
- *	ha = adapter block pointer.
- *	fcport = port structure pointer.
- *
- * Return:
- *	None.
- *
- * Context:
- */
 void
 qla2x00_mark_all_devices_lost(scsi_qla_host_t *vha)
 {
@@ -3931,16 +3946,6 @@ qla2x00_mark_all_devices_lost(scsi_qla_host_t *vha)
 	list_for_each_entry(fcport, &vha->vp_fcports, list) {
 		fcport->scan_state = 0;
 		qlt_schedule_sess_for_deletion(fcport);
-
-		if (vha->vp_idx != 0 && vha->vp_idx != fcport->vha->vp_idx)
-			continue;
-
-		/*
-		 * No point in marking the device as lost, if the device is
-		 * already DEAD.
-		 */
-		if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD)
-			continue;
 	}
 }
 
@@ -4811,6 +4816,9 @@ struct scsi_qla_host *qla2x00_create_host(struct scsi_host_template *sht,
 	INIT_LIST_HEAD(&vha->gpnid_list);
 	INIT_WORK(&vha->iocb_work, qla2x00_iocb_work_fn);
 
+	INIT_LIST_HEAD(&vha->purex_list.head);
+	spin_lock_init(&vha->purex_list.lock);
+
 	spin_lock_init(&vha->work_lock);
 	spin_lock_init(&vha->cmd_list_lock);
 	init_waitqueue_head(&vha->fcport_waitQ);
@@ -5168,9 +5176,8 @@ void qla24xx_create_new_sess(struct scsi_qla_host *vha, struct qla_work_evt *e)
 					fcport->n2n_flag = 1;
 				}
 				fcport->fw_login_state = 0;
-				/*
-				 * wait link init done before sending login
-				 */
+
+				schedule_delayed_work(&vha->scan.scan_work, 5);
 			} else {
 				qla24xx_fcport_handle_login(vha, fcport);
 			}
@@ -5731,6 +5738,583 @@ qla83xx_idc_lock(scsi_qla_host_t *base_vha, uint16_t requester_id)
 	return;
 }
 
+static bool
+qla25xx_rdp_rsp_reduce_size(struct scsi_qla_host *vha,
+	struct purex_entry_24xx *purex)
+{
+	char fwstr[16];
+	u32 sid = purex->s_id[2] << 16 | purex->s_id[1] << 8 | purex->s_id[0];
+	struct port_database_24xx *pdb;
+
+	/* Domain Controller is always logged-out. */
+	/* if RDP request is not from Domain Controller: */
+	if (sid != 0xfffc01)
+		return false;
+
+	ql_dbg(ql_dbg_init, vha, 0x0181, "%s: s_id=%#x\n", __func__, sid);
+
+	pdb = kzalloc(sizeof(*pdb), GFP_KERNEL);
+	if (!pdb) {
+		ql_dbg(ql_dbg_init, vha, 0x0181,
+		    "%s: Failed allocate pdb\n", __func__);
+	} else if (qla24xx_get_port_database(vha, purex->nport_handle, pdb)) {
+		ql_dbg(ql_dbg_init, vha, 0x0181,
+		    "%s: Failed get pdb sid=%x\n", __func__, sid);
+	} else if (pdb->current_login_state != PDS_PLOGI_COMPLETE &&
+	    pdb->current_login_state != PDS_PRLI_COMPLETE) {
+		ql_dbg(ql_dbg_init, vha, 0x0181,
+		    "%s: Port not logged in sid=%#x\n", __func__, sid);
+	} else {
+		/* RDP request is from logged in port */
+		kfree(pdb);
+		return false;
+	}
+	kfree(pdb);
+
+	vha->hw->isp_ops->fw_version_str(vha, fwstr, sizeof(fwstr));
+	fwstr[strcspn(fwstr, " ")] = 0;
+	/* if FW version allows RDP response length upto 2048 bytes: */
+	if (strcmp(fwstr, "8.09.00") > 0 || strcmp(fwstr, "8.05.65") == 0)
+		return false;
+
+	ql_dbg(ql_dbg_init, vha, 0x0181, "%s: fw=%s\n", __func__, fwstr);
+
+	/* RDP response length is to be reduced to maximum 256 bytes */
+	return true;
+}
+
+static uint
+qla25xx_rdp_port_speed_capability(struct qla_hw_data *ha)
+{
+	if (IS_CNA_CAPABLE(ha))
+		return RDP_PORT_SPEED_10GB;
+
+	if (IS_QLA27XX(ha) || IS_QLA28XX(ha)) {
+		unsigned int speeds = 0;
+
+		if (ha->max_supported_speed == 2) {
+			if (ha->min_supported_speed <= 6)
+				speeds |= RDP_PORT_SPEED_64GB;
+		}
+
+		if (ha->max_supported_speed == 2 ||
+		    ha->max_supported_speed == 1) {
+			if (ha->min_supported_speed <= 5)
+				speeds |= RDP_PORT_SPEED_32GB;
+		}
+
+		if (ha->max_supported_speed == 2 ||
+		    ha->max_supported_speed == 1 ||
+		    ha->max_supported_speed == 0) {
+			if (ha->min_supported_speed <= 4)
+				speeds |= RDP_PORT_SPEED_16GB;
+		}
+
+		if (ha->max_supported_speed == 1 ||
+		    ha->max_supported_speed == 0) {
+			if (ha->min_supported_speed <= 3)
+				speeds |= RDP_PORT_SPEED_8GB;
+		}
+
+		if (ha->max_supported_speed == 0) {
+			if (ha->min_supported_speed <= 2)
+				speeds |= RDP_PORT_SPEED_4GB;
+		}
+
+		return speeds;
+	}
+
+	if (IS_QLA2031(ha))
+		return RDP_PORT_SPEED_16GB|RDP_PORT_SPEED_8GB|
+		       RDP_PORT_SPEED_4GB;
+
+	if (IS_QLA25XX(ha))
+		return RDP_PORT_SPEED_8GB|RDP_PORT_SPEED_4GB|
+		       RDP_PORT_SPEED_2GB|RDP_PORT_SPEED_1GB;
+
+	if (IS_QLA24XX_TYPE(ha))
+		return RDP_PORT_SPEED_4GB|RDP_PORT_SPEED_2GB|
+		       RDP_PORT_SPEED_1GB;
+
+	if (IS_QLA23XX(ha))
+		return RDP_PORT_SPEED_2GB|RDP_PORT_SPEED_1GB;
+
+	return RDP_PORT_SPEED_1GB;
+}
+
+static uint
+qla25xx_rdp_port_speed_currently(struct qla_hw_data *ha)
+{
+	switch (ha->link_data_rate) {
+	case PORT_SPEED_1GB:
+		return RDP_PORT_SPEED_1GB;
+
+	case PORT_SPEED_2GB:
+		return RDP_PORT_SPEED_2GB;
+
+	case PORT_SPEED_4GB:
+		return RDP_PORT_SPEED_4GB;
+
+	case PORT_SPEED_8GB:
+		return RDP_PORT_SPEED_8GB;
+
+	case PORT_SPEED_10GB:
+		return RDP_PORT_SPEED_10GB;
+
+	case PORT_SPEED_16GB:
+		return RDP_PORT_SPEED_16GB;
+
+	case PORT_SPEED_32GB:
+		return RDP_PORT_SPEED_32GB;
+
+	case PORT_SPEED_64GB:
+		return RDP_PORT_SPEED_64GB;
+
+	default:
+		return RDP_PORT_SPEED_UNKNOWN;
+	}
+}
+
+/*
+ * Function Name: qla24xx_process_purex_iocb
+ *
+ * Description:
+ * Prepare a RDP response and send to Fabric switch
+ *
+ * PARAMETERS:
+ * vha:	SCSI qla host
+ * purex: RDP request received by HBA
+ */
+void qla24xx_process_purex_rdp(struct scsi_qla_host *vha, void *pkt)
+{
+	struct qla_hw_data *ha = vha->hw;
+	struct purex_entry_24xx *purex = pkt;
+	dma_addr_t rsp_els_dma;
+	dma_addr_t rsp_payload_dma;
+	dma_addr_t stat_dma;
+	dma_addr_t bbc_dma;
+	dma_addr_t sfp_dma;
+	struct els_entry_24xx *rsp_els = NULL;
+	struct rdp_rsp_payload *rsp_payload = NULL;
+	struct link_statistics *stat = NULL;
+	struct buffer_credit_24xx *bbc = NULL;
+	uint8_t *sfp = NULL;
+	uint16_t sfp_flags = 0;
+	uint rsp_payload_length = sizeof(*rsp_payload);
+	int rval;
+
+	ql_dbg(ql_dbg_init + ql_dbg_verbose, vha, 0x0180,
+	    "%s: Enter\n", __func__);
+
+	ql_dbg(ql_dbg_init + ql_dbg_verbose, vha, 0x0181,
+	    "-------- ELS REQ -------\n");
+	ql_dump_buffer(ql_dbg_init + ql_dbg_verbose, vha, 0x0182,
+	    (void *)purex, sizeof(*purex));
+
+	if (qla25xx_rdp_rsp_reduce_size(vha, purex)) {
+		rsp_payload_length =
+		    offsetof(typeof(*rsp_payload), optical_elmt_desc);
+		ql_dbg(ql_dbg_init, vha, 0x0181,
+		    "Reducing RSP payload length to %u bytes...\n",
+		    rsp_payload_length);
+	}
+
+	rsp_els = dma_alloc_coherent(&ha->pdev->dev, sizeof(*rsp_els),
+	    &rsp_els_dma, GFP_KERNEL);
+	if (!rsp_els) {
+		ql_log(ql_log_warn, vha, 0x0183,
+		    "Failed allocate dma buffer ELS RSP.\n");
+		goto dealloc;
+	}
+
+	rsp_payload = dma_alloc_coherent(&ha->pdev->dev, sizeof(*rsp_payload),
+	    &rsp_payload_dma, GFP_KERNEL);
+	if (!rsp_payload) {
+		ql_log(ql_log_warn, vha, 0x0184,
+		    "Failed allocate dma buffer ELS RSP payload.\n");
+		goto dealloc;
+	}
+
+	sfp = dma_alloc_coherent(&ha->pdev->dev, SFP_RTDI_LEN,
+	    &sfp_dma, GFP_KERNEL);
+
+	stat = dma_alloc_coherent(&ha->pdev->dev, sizeof(*stat),
+	    &stat_dma, GFP_KERNEL);
+
+	bbc = dma_alloc_coherent(&ha->pdev->dev, sizeof(*bbc),
+	    &bbc_dma, GFP_KERNEL);
+
+	/* Prepare Response IOCB */
+	rsp_els->entry_type = ELS_IOCB_TYPE;
+	rsp_els->entry_count = 1;
+	rsp_els->sys_define = 0;
+	rsp_els->entry_status = 0;
+	rsp_els->handle = 0;
+	rsp_els->nport_handle = purex->nport_handle;
+	rsp_els->tx_dsd_count = 1;
+	rsp_els->vp_index = purex->vp_idx;
+	rsp_els->sof_type = EST_SOFI3;
+	rsp_els->rx_xchg_address = purex->rx_xchg_addr;
+	rsp_els->rx_dsd_count = 0;
+	rsp_els->opcode = purex->els_frame_payload[0];
+
+	rsp_els->d_id[0] = purex->s_id[0];
+	rsp_els->d_id[1] = purex->s_id[1];
+	rsp_els->d_id[2] = purex->s_id[2];
+
+	rsp_els->control_flags = EPD_ELS_ACC;
+	rsp_els->rx_byte_count = 0;
+	rsp_els->tx_byte_count = cpu_to_le32(rsp_payload_length);
+
+	put_unaligned_le64(rsp_payload_dma, &rsp_els->tx_address);
+	rsp_els->tx_len = rsp_els->tx_byte_count;
+
+	rsp_els->rx_address = 0;
+	rsp_els->rx_len = 0;
+
+	/* Prepare Response Payload */
+	rsp_payload->hdr.cmd = cpu_to_be32(0x2 << 24); /* LS_ACC */
+	rsp_payload->hdr.len = cpu_to_be32(
+	    rsp_els->tx_byte_count - sizeof(rsp_payload->hdr));
+
+	/* Link service Request Info Descriptor */
+	rsp_payload->ls_req_info_desc.desc_tag = cpu_to_be32(0x1);
+	rsp_payload->ls_req_info_desc.desc_len =
+	    cpu_to_be32(RDP_DESC_LEN(rsp_payload->ls_req_info_desc));
+	rsp_payload->ls_req_info_desc.req_payload_word_0 =
+	    cpu_to_be32p((uint32_t *)purex->els_frame_payload);
+
+	/* Link service Request Info Descriptor 2 */
+	rsp_payload->ls_req_info_desc2.desc_tag = cpu_to_be32(0x1);
+	rsp_payload->ls_req_info_desc2.desc_len =
+	    cpu_to_be32(RDP_DESC_LEN(rsp_payload->ls_req_info_desc2));
+	rsp_payload->ls_req_info_desc2.req_payload_word_0 =
+	    cpu_to_be32p((uint32_t *)purex->els_frame_payload);
+
+
+	rsp_payload->sfp_diag_desc.desc_tag = cpu_to_be32(0x10000);
+	rsp_payload->sfp_diag_desc.desc_len =
+		cpu_to_be32(RDP_DESC_LEN(rsp_payload->sfp_diag_desc));
+
+	if (sfp) {
+		/* SFP Flags */
+		memset(sfp, 0, SFP_RTDI_LEN);
+		rval = qla2x00_read_sfp(vha, sfp_dma, sfp, 0xa0, 0x7, 2, 0);
+		if (!rval) {
+			/* SFP Flags bits 3-0: Port Tx Laser Type */
+			if (sfp[0] & BIT_2 || sfp[1] & (BIT_6|BIT_5))
+				sfp_flags |= BIT_0; /* short wave */
+			else if (sfp[0] & BIT_1)
+				sfp_flags |= BIT_1; /* long wave 1310nm */
+			else if (sfp[1] & BIT_4)
+				sfp_flags |= BIT_1|BIT_0; /* long wave 1550nm */
+		}
+
+		/* SFP Type */
+		memset(sfp, 0, SFP_RTDI_LEN);
+		rval = qla2x00_read_sfp(vha, sfp_dma, sfp, 0xa0, 0x0, 1, 0);
+		if (!rval) {
+			sfp_flags |= BIT_4; /* optical */
+			if (sfp[0] == 0x3)
+				sfp_flags |= BIT_6; /* sfp+ */
+		}
+
+		rsp_payload->sfp_diag_desc.sfp_flags = cpu_to_be16(sfp_flags);
+
+		/* SFP Diagnostics */
+		memset(sfp, 0, SFP_RTDI_LEN);
+		rval = qla2x00_read_sfp(vha, sfp_dma, sfp, 0xa2, 0x60, 10, 0);
+		if (!rval) {
+			uint16_t *trx = (void *)sfp; /* already be16 */
+			rsp_payload->sfp_diag_desc.temperature = trx[0];
+			rsp_payload->sfp_diag_desc.vcc = trx[1];
+			rsp_payload->sfp_diag_desc.tx_bias = trx[2];
+			rsp_payload->sfp_diag_desc.tx_power = trx[3];
+			rsp_payload->sfp_diag_desc.rx_power = trx[4];
+		}
+	}
+
+	/* Port Speed Descriptor */
+	rsp_payload->port_speed_desc.desc_tag = cpu_to_be32(0x10001);
+	rsp_payload->port_speed_desc.desc_len =
+	    cpu_to_be32(RDP_DESC_LEN(rsp_payload->port_speed_desc));
+	rsp_payload->port_speed_desc.speed_capab = cpu_to_be16(
+	    qla25xx_rdp_port_speed_capability(ha));
+	rsp_payload->port_speed_desc.operating_speed = cpu_to_be16(
+	    qla25xx_rdp_port_speed_currently(ha));
+
+	/* Link Error Status Descriptor */
+	rsp_payload->ls_err_desc.desc_tag = cpu_to_be32(0x10002);
+	rsp_payload->ls_err_desc.desc_len =
+		cpu_to_be32(RDP_DESC_LEN(rsp_payload->ls_err_desc));
+
+	if (stat) {
+		rval = qla24xx_get_isp_stats(vha, stat, stat_dma, 0);
+		if (!rval) {
+			rsp_payload->ls_err_desc.link_fail_cnt =
+			    cpu_to_be32(stat->link_fail_cnt);
+			rsp_payload->ls_err_desc.loss_sync_cnt =
+			    cpu_to_be32(stat->loss_sync_cnt);
+			rsp_payload->ls_err_desc.loss_sig_cnt =
+			    cpu_to_be32(stat->loss_sig_cnt);
+			rsp_payload->ls_err_desc.prim_seq_err_cnt =
+			    cpu_to_be32(stat->prim_seq_err_cnt);
+			rsp_payload->ls_err_desc.inval_xmit_word_cnt =
+			    cpu_to_be32(stat->inval_xmit_word_cnt);
+			rsp_payload->ls_err_desc.inval_crc_cnt =
+			    cpu_to_be32(stat->inval_crc_cnt);
+			rsp_payload->ls_err_desc.pn_port_phy_type |= BIT_6;
+		}
+	}
+
+	/* Portname Descriptor */
+	rsp_payload->port_name_diag_desc.desc_tag = cpu_to_be32(0x10003);
+	rsp_payload->port_name_diag_desc.desc_len =
+	    cpu_to_be32(RDP_DESC_LEN(rsp_payload->port_name_diag_desc));
+	memcpy(rsp_payload->port_name_diag_desc.WWNN,
+	    vha->node_name,
+	    sizeof(rsp_payload->port_name_diag_desc.WWNN));
+	memcpy(rsp_payload->port_name_diag_desc.WWPN,
+	    vha->port_name,
+	    sizeof(rsp_payload->port_name_diag_desc.WWPN));
+
+	/* F-Port Portname Descriptor */
+	rsp_payload->port_name_direct_desc.desc_tag = cpu_to_be32(0x10003);
+	rsp_payload->port_name_direct_desc.desc_len =
+	    cpu_to_be32(RDP_DESC_LEN(rsp_payload->port_name_direct_desc));
+	memcpy(rsp_payload->port_name_direct_desc.WWNN,
+	    vha->fabric_node_name,
+	    sizeof(rsp_payload->port_name_direct_desc.WWNN));
+	memcpy(rsp_payload->port_name_direct_desc.WWPN,
+	    vha->fabric_port_name,
+	    sizeof(rsp_payload->port_name_direct_desc.WWPN));
+
+	/* Bufer Credit Descriptor */
+	rsp_payload->buffer_credit_desc.desc_tag = cpu_to_be32(0x10006);
+	rsp_payload->buffer_credit_desc.desc_len =
+		cpu_to_be32(RDP_DESC_LEN(rsp_payload->buffer_credit_desc));
+	rsp_payload->buffer_credit_desc.fcport_b2b = 0;
+	rsp_payload->buffer_credit_desc.attached_fcport_b2b = cpu_to_be32(0);
+	rsp_payload->buffer_credit_desc.fcport_rtt = cpu_to_be32(0);
+
+	if (bbc) {
+		memset(bbc, 0, sizeof(*bbc));
+		rval = qla24xx_get_buffer_credits(vha, bbc, bbc_dma);
+		if (!rval) {
+			rsp_payload->buffer_credit_desc.fcport_b2b =
+			    cpu_to_be32(LSW(bbc->parameter[0]));
+		}
+	}
+
+	if (rsp_payload_length < sizeof(*rsp_payload))
+		goto send;
+
+	/* Optical Element Descriptor, Temperature */
+	rsp_payload->optical_elmt_desc[0].desc_tag = cpu_to_be32(0x10007);
+	rsp_payload->optical_elmt_desc[0].desc_len =
+		cpu_to_be32(RDP_DESC_LEN(*rsp_payload->optical_elmt_desc));
+	/* Optical Element Descriptor, Voltage */
+	rsp_payload->optical_elmt_desc[1].desc_tag = cpu_to_be32(0x10007);
+	rsp_payload->optical_elmt_desc[1].desc_len =
+		cpu_to_be32(RDP_DESC_LEN(*rsp_payload->optical_elmt_desc));
+	/* Optical Element Descriptor, Tx Bias Current */
+	rsp_payload->optical_elmt_desc[2].desc_tag = cpu_to_be32(0x10007);
+	rsp_payload->optical_elmt_desc[2].desc_len =
+		cpu_to_be32(RDP_DESC_LEN(*rsp_payload->optical_elmt_desc));
+	/* Optical Element Descriptor, Tx Power */
+	rsp_payload->optical_elmt_desc[3].desc_tag = cpu_to_be32(0x10007);
+	rsp_payload->optical_elmt_desc[3].desc_len =
+		cpu_to_be32(RDP_DESC_LEN(*rsp_payload->optical_elmt_desc));
+	/* Optical Element Descriptor, Rx Power */
+	rsp_payload->optical_elmt_desc[4].desc_tag = cpu_to_be32(0x10007);
+	rsp_payload->optical_elmt_desc[4].desc_len =
+		cpu_to_be32(RDP_DESC_LEN(*rsp_payload->optical_elmt_desc));
+
+	if (sfp) {
+		memset(sfp, 0, SFP_RTDI_LEN);
+		rval = qla2x00_read_sfp(vha, sfp_dma, sfp, 0xa2, 0, 64, 0);
+		if (!rval) {
+			uint16_t *trx = (void *)sfp; /* already be16 */
+
+			/* Optical Element Descriptor, Temperature */
+			rsp_payload->optical_elmt_desc[0].high_alarm = trx[0];
+			rsp_payload->optical_elmt_desc[0].low_alarm = trx[1];
+			rsp_payload->optical_elmt_desc[0].high_warn = trx[2];
+			rsp_payload->optical_elmt_desc[0].low_warn = trx[3];
+			rsp_payload->optical_elmt_desc[0].element_flags =
+			    cpu_to_be32(1 << 28);
+
+			/* Optical Element Descriptor, Voltage */
+			rsp_payload->optical_elmt_desc[1].high_alarm = trx[4];
+			rsp_payload->optical_elmt_desc[1].low_alarm = trx[5];
+			rsp_payload->optical_elmt_desc[1].high_warn = trx[6];
+			rsp_payload->optical_elmt_desc[1].low_warn = trx[7];
+			rsp_payload->optical_elmt_desc[1].element_flags =
+			    cpu_to_be32(2 << 28);
+
+			/* Optical Element Descriptor, Tx Bias Current */
+			rsp_payload->optical_elmt_desc[2].high_alarm = trx[8];
+			rsp_payload->optical_elmt_desc[2].low_alarm = trx[9];
+			rsp_payload->optical_elmt_desc[2].high_warn = trx[10];
+			rsp_payload->optical_elmt_desc[2].low_warn = trx[11];
+			rsp_payload->optical_elmt_desc[2].element_flags =
+			    cpu_to_be32(3 << 28);
+
+			/* Optical Element Descriptor, Tx Power */
+			rsp_payload->optical_elmt_desc[3].high_alarm = trx[12];
+			rsp_payload->optical_elmt_desc[3].low_alarm = trx[13];
+			rsp_payload->optical_elmt_desc[3].high_warn = trx[14];
+			rsp_payload->optical_elmt_desc[3].low_warn = trx[15];
+			rsp_payload->optical_elmt_desc[3].element_flags =
+			    cpu_to_be32(4 << 28);
+
+			/* Optical Element Descriptor, Rx Power */
+			rsp_payload->optical_elmt_desc[4].high_alarm = trx[16];
+			rsp_payload->optical_elmt_desc[4].low_alarm = trx[17];
+			rsp_payload->optical_elmt_desc[4].high_warn = trx[18];
+			rsp_payload->optical_elmt_desc[4].low_warn = trx[19];
+			rsp_payload->optical_elmt_desc[4].element_flags =
+			    cpu_to_be32(5 << 28);
+		}
+
+		memset(sfp, 0, SFP_RTDI_LEN);
+		rval = qla2x00_read_sfp(vha, sfp_dma, sfp, 0xa2, 112, 64, 0);
+		if (!rval) {
+			/* Temperature high/low alarm/warning */
+			rsp_payload->optical_elmt_desc[0].element_flags |=
+			    cpu_to_be32(
+				(sfp[0] >> 7 & 1) << 3 |
+				(sfp[0] >> 6 & 1) << 2 |
+				(sfp[4] >> 7 & 1) << 1 |
+				(sfp[4] >> 6 & 1) << 0);
+
+			/* Voltage high/low alarm/warning */
+			rsp_payload->optical_elmt_desc[1].element_flags |=
+			    cpu_to_be32(
+				(sfp[0] >> 5 & 1) << 3 |
+				(sfp[0] >> 4 & 1) << 2 |
+				(sfp[4] >> 5 & 1) << 1 |
+				(sfp[4] >> 4 & 1) << 0);
+
+			/* Tx Bias Current high/low alarm/warning */
+			rsp_payload->optical_elmt_desc[2].element_flags |=
+			    cpu_to_be32(
+				(sfp[0] >> 3 & 1) << 3 |
+				(sfp[0] >> 2 & 1) << 2 |
+				(sfp[4] >> 3 & 1) << 1 |
+				(sfp[4] >> 2 & 1) << 0);
+
+			/* Tx Power high/low alarm/warning */
+			rsp_payload->optical_elmt_desc[3].element_flags |=
+			    cpu_to_be32(
+				(sfp[0] >> 1 & 1) << 3 |
+				(sfp[0] >> 0 & 1) << 2 |
+				(sfp[4] >> 1 & 1) << 1 |
+				(sfp[4] >> 0 & 1) << 0);
+
+			/* Rx Power high/low alarm/warning */
+			rsp_payload->optical_elmt_desc[4].element_flags |=
+			    cpu_to_be32(
+				(sfp[1] >> 7 & 1) << 3 |
+				(sfp[1] >> 6 & 1) << 2 |
+				(sfp[5] >> 7 & 1) << 1 |
+				(sfp[5] >> 6 & 1) << 0);
+		}
+	}
+
+	/* Optical Product Data Descriptor */
+	rsp_payload->optical_prod_desc.desc_tag = cpu_to_be32(0x10008);
+	rsp_payload->optical_prod_desc.desc_len =
+		cpu_to_be32(RDP_DESC_LEN(rsp_payload->optical_prod_desc));
+
+	if (sfp) {
+		memset(sfp, 0, SFP_RTDI_LEN);
+		rval = qla2x00_read_sfp(vha, sfp_dma, sfp, 0xa0, 20, 64, 0);
+		if (!rval) {
+			memcpy(rsp_payload->optical_prod_desc.vendor_name,
+			    sfp + 0,
+			    sizeof(rsp_payload->optical_prod_desc.vendor_name));
+			memcpy(rsp_payload->optical_prod_desc.part_number,
+			    sfp + 20,
+			    sizeof(rsp_payload->optical_prod_desc.part_number));
+			memcpy(rsp_payload->optical_prod_desc.revision,
+			    sfp + 36,
+			    sizeof(rsp_payload->optical_prod_desc.revision));
+			memcpy(rsp_payload->optical_prod_desc.serial_number,
+			    sfp + 48,
+			    sizeof(rsp_payload->optical_prod_desc.serial_number));
+		}
+
+		memset(sfp, 0, SFP_RTDI_LEN);
+		rval = qla2x00_read_sfp(vha, sfp_dma, sfp, 0xa0, 84, 8, 0);
+		if (!rval) {
+			memcpy(rsp_payload->optical_prod_desc.date,
+			    sfp + 0,
+			    sizeof(rsp_payload->optical_prod_desc.date));
+		}
+	}
+
+send:
+	ql_dbg(ql_dbg_init, vha, 0x0183,
+	    "Sending ELS Response to RDP Request...\n");
+	ql_dbg(ql_dbg_init + ql_dbg_verbose, vha, 0x0184,
+	    "-------- ELS RSP -------\n");
+	ql_dump_buffer(ql_dbg_init + ql_dbg_verbose, vha, 0x0185,
+	    (void *)rsp_els, sizeof(*rsp_els));
+	ql_dbg(ql_dbg_init + ql_dbg_verbose, vha, 0x0186,
+	    "-------- ELS RSP PAYLOAD -------\n");
+	ql_dump_buffer(ql_dbg_init + ql_dbg_verbose, vha, 0x0187,
+	    (void *)rsp_payload, rsp_payload_length);
+
+	rval = qla2x00_issue_iocb(vha, rsp_els, rsp_els_dma, 0);
+
+	if (rval) {
+		ql_log(ql_log_warn, vha, 0x0188,
+		    "%s: iocb failed to execute -> %x\n", __func__, rval);
+	} else if (rsp_els->comp_status) {
+		ql_log(ql_log_warn, vha, 0x0189,
+		    "%s: iocb failed to complete -> completion=%#x subcode=(%#x,%#x)\n",
+		    __func__, rsp_els->comp_status,
+		    rsp_els->error_subcode_1, rsp_els->error_subcode_2);
+	} else {
+		ql_dbg(ql_dbg_init, vha, 0x018a, "%s: done.\n", __func__);
+	}
+
+dealloc:
+	if (bbc)
+		dma_free_coherent(&ha->pdev->dev, sizeof(*bbc),
+		    bbc, bbc_dma);
+	if (stat)
+		dma_free_coherent(&ha->pdev->dev, sizeof(*stat),
+		    stat, stat_dma);
+	if (sfp)
+		dma_free_coherent(&ha->pdev->dev, SFP_RTDI_LEN,
+		    sfp, sfp_dma);
+	if (rsp_payload)
+		dma_free_coherent(&ha->pdev->dev, sizeof(*rsp_payload),
+		    rsp_payload, rsp_payload_dma);
+	if (rsp_els)
+		dma_free_coherent(&ha->pdev->dev, sizeof(*rsp_els),
+		    rsp_els, rsp_els_dma);
+}
+
+void qla24xx_process_purex_list(struct purex_list *list)
+{
+	struct list_head head = LIST_HEAD_INIT(head);
+	struct purex_item *item, *next;
+	ulong flags;
+
+	spin_lock_irqsave(&list->lock, flags);
+	list_splice_init(&list->head, &head);
+	spin_unlock_irqrestore(&list->lock, flags);
+
+	list_for_each_entry_safe(item, next, &head, list) {
+		list_del(&item->list);
+		item->process_item(item->vha, &item->iocb);
+		kfree(item);
+	}
+}
+
 void
 qla83xx_idc_unlock(scsi_qla_host_t *base_vha, uint16_t requester_id)
 {
@@ -6254,13 +6838,14 @@ qla2x00_do_dpc(void *data)
 		}
 
 		if (test_and_clear_bit(DETECT_SFP_CHANGE,
-			&base_vha->dpc_flags) &&
-		    !test_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags)) {
-			qla24xx_detect_sfp(base_vha);
-
-			if (ha->flags.detected_lr_sfp !=
-			    ha->flags.using_lr_setting)
-				set_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags);
+		    &base_vha->dpc_flags)) {
+			/* Semantic:
+			 *  - NO-OP -- await next ISP-ABORT. Preferred method
+			 *             to minimize disruptions that will occur
+			 *             when a forced chip-reset occurs.
+			 *  - Force -- ISP-ABORT scheduled.
+			 */
+			/* set_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags); */
 		}
 
 		if (test_and_clear_bit
@@ -6301,6 +6886,15 @@ qla2x00_do_dpc(void *data)
 			}
 		}
 
+		if (test_bit(PROCESS_PUREX_IOCB, &base_vha->dpc_flags)) {
+			if (atomic_read(&base_vha->loop_state) == LOOP_READY) {
+				qla24xx_process_purex_list
+					(&base_vha->purex_list);
+				clear_bit(PROCESS_PUREX_IOCB,
+				    &base_vha->dpc_flags);
+			}
+		}
+
 		if (test_and_clear_bit(FCPORT_UPDATE_NEEDED,
 		    &base_vha->dpc_flags)) {
 			qla2x00_update_fcports(base_vha);
@@ -6692,7 +7286,8 @@ qla2x00_timer(struct timer_list *t)
 	    test_bit(ISP_UNRECOVERABLE, &vha->dpc_flags) ||
 	    test_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags) ||
 	    test_bit(VP_DPC_NEEDED, &vha->dpc_flags) ||
-	    test_bit(RELOGIN_NEEDED, &vha->dpc_flags))) {
+	    test_bit(RELOGIN_NEEDED, &vha->dpc_flags) ||
+	    test_bit(PROCESS_PUREX_IOCB, &vha->dpc_flags))) {
 		ql_dbg(ql_dbg_timer, vha, 0x600b,
 		    "isp_abort_needed=%d loop_resync_needed=%d "
 		    "fcport_update_needed=%d start_dpc=%d "
@@ -6705,12 +7300,13 @@ qla2x00_timer(struct timer_list *t)
 		ql_dbg(ql_dbg_timer, vha, 0x600c,
 		    "beacon_blink_needed=%d isp_unrecoverable=%d "
 		    "fcoe_ctx_reset_needed=%d vp_dpc_needed=%d "
-		    "relogin_needed=%d.\n",
+		    "relogin_needed=%d, Process_purex_iocb=%d.\n",
 		    test_bit(BEACON_BLINK_NEEDED, &vha->dpc_flags),
 		    test_bit(ISP_UNRECOVERABLE, &vha->dpc_flags),
 		    test_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags),
 		    test_bit(VP_DPC_NEEDED, &vha->dpc_flags),
-		    test_bit(RELOGIN_NEEDED, &vha->dpc_flags));
+		    test_bit(RELOGIN_NEEDED, &vha->dpc_flags),
+		    test_bit(PROCESS_PUREX_IOCB, &vha->dpc_flags));
 		qla2xxx_wake_dpc(vha);
 	}
 
diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c
index 76a38bf..3da79ee 100644
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -2683,7 +2683,7 @@ qla28xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr,
 	uint32_t sec_mask, rest_addr, fdata;
 	void *optrom = NULL;
 	dma_addr_t optrom_dma;
-	int rval;
+	int rval, ret;
 	struct secure_flash_update_block *sfub;
 	dma_addr_t sfub_dma;
 	uint32_t offset = faddr << 2;
@@ -2939,11 +2939,12 @@ qla28xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr,
 write_protect:
 	ql_log(ql_log_warn + ql_dbg_verbose, vha, 0x7095,
 	    "Protect flash...\n");
-	rval = qla24xx_protect_flash(vha);
-	if (rval) {
+	ret = qla24xx_protect_flash(vha);
+	if (ret) {
 		qla81xx_fac_semaphore_access(vha, FAC_SEMAPHORE_UNLOCK);
 		ql_log(ql_log_warn, vha, 0x7099,
 		    "Failed protect flash\n");
+		rval = QLA_COMMAND_ERROR;
 	}
 
 	if (reset_to_rom == true) {
@@ -2951,10 +2952,12 @@ qla28xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr,
 		set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
 		qla2xxx_wake_dpc(vha);
 
-		rval = qla2x00_wait_for_hba_online(vha);
-		if (rval != QLA_SUCCESS)
+		ret = qla2x00_wait_for_hba_online(vha);
+		if (ret != QLA_SUCCESS) {
 			ql_log(ql_log_warn, vha, 0xffff,
 			    "Adapter did not come out of reset\n");
+			rval = QLA_COMMAND_ERROR;
+		}
 	}
 
 done:
diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c
index 70081b3..622e733 100644
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -27,8 +27,6 @@
 #include <scsi/scsi.h>
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_tcq.h>
-#include <target/target_core_base.h>
-#include <target/target_core_fabric.h>
 
 #include "qla_def.h"
 #include "qla_target.h"
@@ -1760,7 +1758,7 @@ static int qlt_build_abts_resp_iocb(struct qla_tgt_mgmt_cmd *mcmd)
 		qpair->req->outstanding_cmds[h] = (srb_t *)mcmd;
 	}
 
-	resp->handle = MAKE_HANDLE(qpair->req->id, h);
+	resp->handle = make_handle(qpair->req->id, h);
 	resp->entry_type = ABTS_RESP_24XX;
 	resp->entry_count = 1;
 	resp->nport_handle = abts->nport_handle;
@@ -2582,7 +2580,7 @@ static int qlt_24xx_build_ctio_pkt(struct qla_qpair *qpair,
 	} else
 		qpair->req->outstanding_cmds[h] = (srb_t *)prm->cmd;
 
-	pkt->handle = MAKE_HANDLE(qpair->req->id, h);
+	pkt->handle = make_handle(qpair->req->id, h);
 	pkt->handle |= CTIO_COMPLETION_HANDLE_MARK;
 	pkt->nport_handle = cpu_to_le16(prm->cmd->loop_id);
 	pkt->timeout = cpu_to_le16(QLA_TGT_TIMEOUT);
@@ -3095,7 +3093,7 @@ qlt_build_ctio_crc2_pkt(struct qla_qpair *qpair, struct qla_tgt_prm *prm)
 	} else
 		qpair->req->outstanding_cmds[h] = (srb_t *)prm->cmd;
 
-	pkt->handle  = MAKE_HANDLE(qpair->req->id, h);
+	pkt->handle  = make_handle(qpair->req->id, h);
 	pkt->handle |= CTIO_COMPLETION_HANDLE_MARK;
 	pkt->nport_handle = cpu_to_le16(prm->cmd->loop_id);
 	pkt->timeout = cpu_to_le16(QLA_TGT_TIMEOUT);
@@ -3816,7 +3814,7 @@ void qlt_free_cmd(struct qla_tgt_cmd *cmd)
 		return;
 	}
 	cmd->jiffies_at_free = get_jiffies_64();
-	target_free_tag(sess->se_sess, &cmd->se_cmd);
+	cmd->vha->hw->tgt.tgt_ops->rel_cmd(cmd);
 }
 EXPORT_SYMBOL(qlt_free_cmd);
 
@@ -4150,7 +4148,7 @@ static void __qlt_do_work(struct qla_tgt_cmd *cmd)
 	qlt_send_term_exchange(qpair, NULL, &cmd->atio, 1, 0);
 
 	qlt_decr_num_pend_cmds(vha);
-	target_free_tag(sess->se_sess, &cmd->se_cmd);
+	cmd->vha->hw->tgt.tgt_ops->rel_cmd(cmd);
 	spin_unlock_irqrestore(qpair->qp_lock_ptr, flags);
 
 	ha->tgt.tgt_ops->put_sess(sess);
@@ -4277,24 +4275,18 @@ static struct qla_tgt_cmd *qlt_get_tag(scsi_qla_host_t *vha,
 				       struct fc_port *sess,
 				       struct atio_from_isp *atio)
 {
-	struct se_session *se_sess = sess->se_sess;
 	struct qla_tgt_cmd *cmd;
-	int tag, cpu;
 
-	tag = sbitmap_queue_get(&se_sess->sess_tag_pool, &cpu);
-	if (tag < 0)
+	cmd = vha->hw->tgt.tgt_ops->get_cmd(sess);
+	if (!cmd)
 		return NULL;
 
-	cmd = &((struct qla_tgt_cmd *)se_sess->sess_cmd_map)[tag];
-	memset(cmd, 0, sizeof(struct qla_tgt_cmd));
 	cmd->cmd_type = TYPE_TGT_CMD;
 	memcpy(&cmd->atio, atio, sizeof(*atio));
 	cmd->state = QLA_TGT_STATE_NEW;
 	cmd->tgt = vha->vha_tgt.qla_tgt;
 	qlt_incr_num_pend_cmds(vha);
 	cmd->vha = vha;
-	cmd->se_cmd.map_tag = tag;
-	cmd->se_cmd.map_cpu = cpu;
 	cmd->sess = sess;
 	cmd->loop_id = sess->loop_id;
 	cmd->conf_compl_supported = sess->conf_compl_supported;
@@ -4747,11 +4739,11 @@ static int qlt_handle_login(struct scsi_qla_host *vha,
 			qla24xx_post_newsess_work(vha, &port_id,
 			    iocb->u.isp24.port_name,
 			    iocb->u.isp24.u.plogi.node_name,
-			    pla, FC4_TYPE_UNKNOWN);
+			    pla, 0);
 		else
 			qla24xx_post_newsess_work(vha, &port_id,
 			    iocb->u.isp24.port_name, NULL,
-			    pla, FC4_TYPE_UNKNOWN);
+			    pla, 0);
 
 		goto out;
 	}
@@ -5352,9 +5344,7 @@ qlt_alloc_qfull_cmd(struct scsi_qla_host *vha,
 	struct qla_tgt *tgt = vha->vha_tgt.qla_tgt;
 	struct qla_hw_data *ha = vha->hw;
 	struct fc_port *sess;
-	struct se_session *se_sess;
 	struct qla_tgt_cmd *cmd;
-	int tag, cpu;
 	unsigned long flags;
 
 	if (unlikely(tgt->tgt_stop)) {
@@ -5384,10 +5374,8 @@ qlt_alloc_qfull_cmd(struct scsi_qla_host *vha,
 	if (!sess)
 		return;
 
-	se_sess = sess->se_sess;
-
-	tag = sbitmap_queue_get(&se_sess->sess_tag_pool, &cpu);
-	if (tag < 0) {
+	cmd = ha->tgt.tgt_ops->get_cmd(sess);
+	if (!cmd) {
 		ql_dbg(ql_dbg_io, vha, 0x3009,
 			"qla_target(%d): %s: Allocation of cmd failed\n",
 			vha->vp_idx, __func__);
@@ -5402,9 +5390,6 @@ qlt_alloc_qfull_cmd(struct scsi_qla_host *vha,
 		return;
 	}
 
-	cmd = &((struct qla_tgt_cmd *)se_sess->sess_cmd_map)[tag];
-	memset(cmd, 0, sizeof(struct qla_tgt_cmd));
-
 	qlt_incr_num_pend_cmds(vha);
 	INIT_LIST_HEAD(&cmd->cmd_list);
 	memcpy(&cmd->atio, atio, sizeof(*atio));
@@ -5414,7 +5399,6 @@ qlt_alloc_qfull_cmd(struct scsi_qla_host *vha,
 	cmd->reset_count = ha->base_qpair->chip_reset;
 	cmd->q_full = 1;
 	cmd->qpair = ha->base_qpair;
-	cmd->se_cmd.map_cpu = cpu;
 
 	if (qfull) {
 		cmd->q_full = 1;
diff --git a/drivers/scsi/qla2xxx/qla_target.h b/drivers/scsi/qla2xxx/qla_target.h
index 6539499..3cf8590 100644
--- a/drivers/scsi/qla2xxx/qla_target.h
+++ b/drivers/scsi/qla2xxx/qla_target.h
@@ -671,6 +671,8 @@ struct qla_tgt_func_tmpl {
 	void (*handle_data)(struct qla_tgt_cmd *);
 	int (*handle_tmr)(struct qla_tgt_mgmt_cmd *, u64, uint16_t,
 			uint32_t);
+	struct qla_tgt_cmd *(*get_cmd)(struct fc_port *);
+	void (*rel_cmd)(struct qla_tgt_cmd *);
 	void (*free_cmd)(struct qla_tgt_cmd *);
 	void (*free_mcmd)(struct qla_tgt_mgmt_cmd *);
 	void (*free_session)(struct fc_port *);
diff --git a/drivers/scsi/qla2xxx/qla_tmpl.c b/drivers/scsi/qla2xxx/qla_tmpl.c
index 5b0c057d..6aeb1c3 100644
--- a/drivers/scsi/qla2xxx/qla_tmpl.c
+++ b/drivers/scsi/qla2xxx/qla_tmpl.c
@@ -870,7 +870,7 @@ qla27xx_walk_template(struct scsi_qla_host *vha,
 static void
 qla27xx_time_stamp(struct qla27xx_fwdt_template *tmp)
 {
-	tmp->capture_timestamp = jiffies;
+	tmp->capture_timestamp = cpu_to_le32(jiffies);
 }
 
 static void
@@ -882,9 +882,10 @@ qla27xx_driver_info(struct qla27xx_fwdt_template *tmp)
 			    "%hhu.%hhu.%hhu.%hhu.%hhu.%hhu",
 			    v+0, v+1, v+2, v+3, v+4, v+5) != 6);
 
-	tmp->driver_info[0] = v[3] << 24 | v[2] << 16 | v[1] << 8 | v[0];
-	tmp->driver_info[1] = v[5] << 8 | v[4];
-	tmp->driver_info[2] = 0x12345678;
+	tmp->driver_info[0] = cpu_to_le32(
+		v[3] << 24 | v[2] << 16 | v[1] << 8 | v[0]);
+	tmp->driver_info[1] = cpu_to_le32(v[5] << 8 | v[4]);
+	tmp->driver_info[2] = __constant_cpu_to_le32(0x12345678);
 }
 
 static void
@@ -894,10 +895,10 @@ qla27xx_firmware_info(struct scsi_qla_host *vha,
 	tmp->firmware_version[0] = vha->hw->fw_major_version;
 	tmp->firmware_version[1] = vha->hw->fw_minor_version;
 	tmp->firmware_version[2] = vha->hw->fw_subminor_version;
-	tmp->firmware_version[3] =
-	    vha->hw->fw_attributes_h << 16 | vha->hw->fw_attributes;
-	tmp->firmware_version[4] =
-	    vha->hw->fw_attributes_ext[1] << 16 | vha->hw->fw_attributes_ext[0];
+	tmp->firmware_version[3] = cpu_to_le32(
+		vha->hw->fw_attributes_h << 16 | vha->hw->fw_attributes);
+	tmp->firmware_version[4] = cpu_to_le32(
+	  vha->hw->fw_attributes_ext[1] << 16 | vha->hw->fw_attributes_ext[0]);
 }
 
 static void
diff --git a/drivers/scsi/qla2xxx/qla_tmpl.h b/drivers/scsi/qla2xxx/qla_tmpl.h
index d2a0014..bba8dc9 100644
--- a/drivers/scsi/qla2xxx/qla_tmpl.h
+++ b/drivers/scsi/qla2xxx/qla_tmpl.h
@@ -18,11 +18,11 @@ struct __packed qla27xx_fwdt_template {
 
 	__le32 entry_count;
 	uint32_t template_version;
-	uint32_t capture_timestamp;
+	__le32 capture_timestamp;
 	uint32_t template_checksum;
 
 	uint32_t reserved_2;
-	uint32_t driver_info[3];
+	__le32 driver_info[3];
 
 	uint32_t saved_state[16];
 
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index bb03c02..8ccd9ba 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
 /*
  * Driver version
  */
-#define QLA2XXX_VERSION      "10.01.00.22-k"
+#define QLA2XXX_VERSION      "10.01.00.25-k"
 
 #define QLA_DRIVER_MAJOR_VER	10
 #define QLA_DRIVER_MINOR_VER	1
diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.c b/drivers/scsi/qla2xxx/tcm_qla2xxx.c
index abe7f79..1f0a185 100644
--- a/drivers/scsi/qla2xxx/tcm_qla2xxx.c
+++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.c
@@ -268,6 +268,29 @@ static void tcm_qla2xxx_complete_free(struct work_struct *work)
 	transport_generic_free_cmd(&cmd->se_cmd, 0);
 }
 
+static struct qla_tgt_cmd *tcm_qla2xxx_get_cmd(struct fc_port *sess)
+{
+	struct se_session *se_sess = sess->se_sess;
+	struct qla_tgt_cmd *cmd;
+	int tag, cpu;
+
+	tag = sbitmap_queue_get(&se_sess->sess_tag_pool, &cpu);
+	if (tag < 0)
+		return NULL;
+
+	cmd = &((struct qla_tgt_cmd *)se_sess->sess_cmd_map)[tag];
+	memset(cmd, 0, sizeof(struct qla_tgt_cmd));
+	cmd->se_cmd.map_tag = tag;
+	cmd->se_cmd.map_cpu = cpu;
+
+	return cmd;
+}
+
+static void tcm_qla2xxx_rel_cmd(struct qla_tgt_cmd *cmd)
+{
+	target_free_tag(cmd->sess->se_sess, &cmd->se_cmd);
+}
+
 /*
  * Called from qla_target_template->free_cmd(), and will call
  * tcm_qla2xxx_release_cmd via normal struct target_core_fabric_ops
@@ -1549,6 +1572,8 @@ static struct qla_tgt_func_tmpl tcm_qla2xxx_template = {
 	.handle_cmd		= tcm_qla2xxx_handle_cmd,
 	.handle_data		= tcm_qla2xxx_handle_data,
 	.handle_tmr		= tcm_qla2xxx_handle_tmr,
+	.get_cmd		= tcm_qla2xxx_get_cmd,
+	.rel_cmd		= tcm_qla2xxx_rel_cmd,
 	.free_cmd		= tcm_qla2xxx_free_cmd,
 	.free_mcmd		= tcm_qla2xxx_free_mcmd,
 	.free_session		= tcm_qla2xxx_free_session,
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 930e480..56c24a7 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -94,20 +94,6 @@ EXPORT_SYMBOL(scsi_logging_level);
 ASYNC_DOMAIN_EXCLUSIVE(scsi_sd_pm_domain);
 EXPORT_SYMBOL(scsi_sd_pm_domain);
 
-/**
- * scsi_put_command - Free a scsi command block
- * @cmd: command block to free
- *
- * Returns:	Nothing.
- *
- * Notes:	The command must not belong to any lists.
- */
-void scsi_put_command(struct scsi_cmnd *cmd)
-{
-	scsi_del_cmd_from_list(cmd);
-	BUG_ON(delayed_work_pending(&cmd->abort_work));
-}
-
 #ifdef CONFIG_SCSI_LOGGING
 void scsi_log_send(struct scsi_cmnd *cmd)
 {
@@ -764,10 +750,6 @@ MODULE_LICENSE("GPL");
 module_param(scsi_logging_level, int, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(scsi_logging_level, "a bit mask of logging levels");
 
-/* This should go away in the future, it doesn't do anything anymore */
-bool scsi_use_blk_mq = true;
-module_param_named(use_blk_mq, scsi_use_blk_mq, bool, S_IWUSR | S_IRUGO);
-
 static int __init init_scsi(void)
 {
 	int error;
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index ae2fa17..978be16 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -2412,7 +2412,6 @@ scsi_ioctl_reset(struct scsi_device *dev, int __user *arg)
 	wake_up(&shost->host_wait);
 	scsi_run_host_queues(shost);
 
-	scsi_put_command(scmd);
 	kfree(rq);
 
 out_put_autopm_host:
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 610ee41..47835c4 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -562,7 +562,6 @@ static void scsi_mq_uninit_cmd(struct scsi_cmnd *cmd)
 {
 	scsi_mq_free_sgtables(cmd);
 	scsi_uninit_cmd(cmd);
-	scsi_del_cmd_from_list(cmd);
 }
 
 /* Returns false when no more bytes to process, true if there are more */
@@ -1098,36 +1097,7 @@ static void scsi_cleanup_rq(struct request *rq)
 	}
 }
 
-/* Add a command to the list used by the aacraid and dpt_i2o drivers */
-void scsi_add_cmd_to_list(struct scsi_cmnd *cmd)
-{
-	struct scsi_device *sdev = cmd->device;
-	struct Scsi_Host *shost = sdev->host;
-	unsigned long flags;
-
-	if (shost->use_cmd_list) {
-		spin_lock_irqsave(&sdev->list_lock, flags);
-		list_add_tail(&cmd->list, &sdev->cmd_list);
-		spin_unlock_irqrestore(&sdev->list_lock, flags);
-	}
-}
-
-/* Remove a command from the list used by the aacraid and dpt_i2o drivers */
-void scsi_del_cmd_from_list(struct scsi_cmnd *cmd)
-{
-	struct scsi_device *sdev = cmd->device;
-	struct Scsi_Host *shost = sdev->host;
-	unsigned long flags;
-
-	if (shost->use_cmd_list) {
-		spin_lock_irqsave(&sdev->list_lock, flags);
-		BUG_ON(list_empty(&cmd->list));
-		list_del_init(&cmd->list);
-		spin_unlock_irqrestore(&sdev->list_lock, flags);
-	}
-}
-
-/* Called after a request has been started. */
+/* Called before a request is prepared. See also scsi_mq_prep_fn(). */
 void scsi_init_command(struct scsi_device *dev, struct scsi_cmnd *cmd)
 {
 	void *buf = cmd->sense_buffer;
@@ -1135,7 +1105,7 @@ void scsi_init_command(struct scsi_device *dev, struct scsi_cmnd *cmd)
 	struct request *rq = blk_mq_rq_from_pdu(cmd);
 	unsigned int flags = cmd->flags & SCMD_PRESERVED_FLAGS;
 	unsigned long jiffies_at_alloc;
-	int retries;
+	int retries, to_clear;
 	bool in_flight;
 
 	if (!blk_rq_is_scsi(rq) && !(flags & SCMD_INITIALIZED)) {
@@ -1146,9 +1116,15 @@ void scsi_init_command(struct scsi_device *dev, struct scsi_cmnd *cmd)
 	jiffies_at_alloc = cmd->jiffies_at_alloc;
 	retries = cmd->retries;
 	in_flight = test_bit(SCMD_STATE_INFLIGHT, &cmd->state);
-	/* zero out the cmd, except for the embedded scsi_request */
-	memset((char *)cmd + sizeof(cmd->req), 0,
-		sizeof(*cmd) - sizeof(cmd->req) + dev->host->hostt->cmd_size);
+	/*
+	 * Zero out the cmd, except for the embedded scsi_request. Only clear
+	 * the driver-private command data if the LLD does not supply a
+	 * function to initialize that data.
+	 */
+	to_clear = sizeof(*cmd) - sizeof(cmd->req);
+	if (!dev->host->hostt->init_cmd_priv)
+		to_clear += dev->host->hostt->cmd_size;
+	memset((char *)cmd + sizeof(cmd->req), 0, to_clear);
 
 	cmd->device = dev;
 	cmd->sense_buffer = buf;
@@ -1160,7 +1136,6 @@ void scsi_init_command(struct scsi_device *dev, struct scsi_cmnd *cmd)
 	if (in_flight)
 		__set_bit(SCMD_STATE_INFLIGHT, &cmd->state);
 
-	scsi_add_cmd_to_list(cmd);
 }
 
 static blk_status_t scsi_setup_scsi_cmnd(struct scsi_device *sdev,
@@ -1240,8 +1215,11 @@ scsi_prep_state_check(struct scsi_device *sdev, struct request *req)
 		 * commands.  The device must be brought online
 		 * before trying any recovery commands.
 		 */
-		sdev_printk(KERN_ERR, sdev,
-			    "rejecting I/O to offline device\n");
+		if (!sdev->offline_already) {
+			sdev->offline_already = true;
+			sdev_printk(KERN_ERR, sdev,
+				    "rejecting I/O to offline device\n");
+		}
 		return BLK_STS_IOERR;
 	case SDEV_DEL:
 		/*
@@ -1742,6 +1720,7 @@ static int scsi_mq_init_request(struct blk_mq_tag_set *set, struct request *rq,
 	const bool unchecked_isa_dma = shost->unchecked_isa_dma;
 	struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(rq);
 	struct scatterlist *sg;
+	int ret = 0;
 
 	if (unchecked_isa_dma)
 		cmd->flags |= SCMD_UNCHECKED_ISA_DMA;
@@ -1757,14 +1736,24 @@ static int scsi_mq_init_request(struct blk_mq_tag_set *set, struct request *rq,
 		cmd->prot_sdb = (void *)sg + scsi_mq_inline_sgl_size(shost);
 	}
 
-	return 0;
+	if (shost->hostt->init_cmd_priv) {
+		ret = shost->hostt->init_cmd_priv(shost, cmd);
+		if (ret < 0)
+			scsi_free_sense_buffer(unchecked_isa_dma,
+					       cmd->sense_buffer);
+	}
+
+	return ret;
 }
 
 static void scsi_mq_exit_request(struct blk_mq_tag_set *set, struct request *rq,
 				 unsigned int hctx_idx)
 {
+	struct Scsi_Host *shost = set->driver_data;
 	struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(rq);
 
+	if (shost->hostt->exit_cmd_priv)
+		shost->hostt->exit_cmd_priv(shost, cmd);
 	scsi_free_sense_buffer(cmd->flags & SCMD_UNCHECKED_ISA_DMA,
 			       cmd->sense_buffer);
 }
@@ -2340,6 +2329,7 @@ scsi_device_set_state(struct scsi_device *sdev, enum scsi_device_state state)
 		break;
 
 	}
+	sdev->offline_already = false;
 	sdev->sdev_state = state;
 	return 0;
 
@@ -2845,6 +2835,36 @@ scsi_target_unblock(struct device *dev, enum scsi_device_state new_state)
 }
 EXPORT_SYMBOL_GPL(scsi_target_unblock);
 
+int
+scsi_host_block(struct Scsi_Host *shost)
+{
+	struct scsi_device *sdev;
+	int ret = 0;
+
+	shost_for_each_device(sdev, shost) {
+		ret = scsi_internal_device_block(sdev);
+		if (ret)
+			break;
+	}
+	return ret;
+}
+EXPORT_SYMBOL_GPL(scsi_host_block);
+
+int
+scsi_host_unblock(struct Scsi_Host *shost, int new_state)
+{
+	struct scsi_device *sdev;
+	int ret = 0;
+
+	shost_for_each_device(sdev, shost) {
+		ret = scsi_internal_device_unblock(sdev, new_state);
+		if (ret)
+			break;
+	}
+	return ret;
+}
+EXPORT_SYMBOL_GPL(scsi_host_unblock);
+
 /**
  * scsi_kmap_atomic_sg - find and atomically map an sg-elemnt
  * @sgl:	scatter-gather list
diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h
index 3bff9f7..22b6585 100644
--- a/drivers/scsi/scsi_priv.h
+++ b/drivers/scsi/scsi_priv.h
@@ -29,7 +29,6 @@ extern int scsi_init_hosts(void);
 extern void scsi_exit_hosts(void);
 
 /* scsi.c */
-extern bool scsi_use_blk_mq;
 int scsi_init_sense_cache(struct Scsi_Host *shost);
 void scsi_init_command(struct scsi_device *dev, struct scsi_cmnd *cmd);
 #ifdef CONFIG_SCSI_LOGGING
@@ -84,8 +83,6 @@ int scsi_eh_get_sense(struct list_head *work_q,
 int scsi_noretry_cmd(struct scsi_cmnd *scmd);
 
 /* scsi_lib.c */
-extern void scsi_add_cmd_to_list(struct scsi_cmnd *cmd);
-extern void scsi_del_cmd_from_list(struct scsi_cmnd *cmd);
 extern int scsi_maybe_unblock_host(struct scsi_device *sdev);
 extern void scsi_device_unbusy(struct scsi_device *sdev, struct scsi_cmnd *cmd);
 extern void scsi_queue_insert(struct scsi_cmnd *cmd, int reason);
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 058079f..f2437a7 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -236,7 +236,6 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget,
 	sdev->sdev_state = SDEV_CREATED;
 	INIT_LIST_HEAD(&sdev->siblings);
 	INIT_LIST_HEAD(&sdev->same_target_siblings);
-	INIT_LIST_HEAD(&sdev->cmd_list);
 	INIT_LIST_HEAD(&sdev->starved_entry);
 	INIT_LIST_HEAD(&sdev->event_list);
 	spin_lock_init(&sdev->list_lock);
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 677b5c5..163dbcb 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -856,7 +856,7 @@ show_vpd_##_page(struct file *filp, struct kobject *kobj,	\
 		 struct bin_attribute *bin_attr,			\
 		 char *buf, loff_t off, size_t count)			\
 {									\
-	struct device *dev = container_of(kobj, struct device, kobj);	\
+	struct device *dev = kobj_to_dev(kobj);				\
 	struct scsi_device *sdev = to_scsi_device(dev);			\
 	struct scsi_vpd *vpd_page;					\
 	int ret = -EINVAL;						\
@@ -884,7 +884,7 @@ static ssize_t show_inquiry(struct file *filep, struct kobject *kobj,
 			    struct bin_attribute *bin_attr,
 			    char *buf, loff_t off, size_t count)
 {
-	struct device *dev = container_of(kobj, struct device, kobj);
+	struct device *dev = kobj_to_dev(kobj);
 	struct scsi_device *sdev = to_scsi_device(dev);
 
 	if (!sdev->inquiry)
@@ -1045,14 +1045,14 @@ sdev_show_blacklist(struct device *dev, struct device_attribute *attr,
 			name = sdev_bflags_name[i];
 
 		if (name)
-			len += snprintf(buf + len, PAGE_SIZE - len,
-					"%s%s", len ? " " : "", name);
+			len += scnprintf(buf + len, PAGE_SIZE - len,
+					 "%s%s", len ? " " : "", name);
 		else
-			len += snprintf(buf + len, PAGE_SIZE - len,
-					"%sINVALID_BIT(%d)", len ? " " : "", i);
+			len += scnprintf(buf + len, PAGE_SIZE - len,
+					 "%sINVALID_BIT(%d)", len ? " " : "", i);
 	}
 	if (len)
-		len += snprintf(buf + len, PAGE_SIZE - len, "\n");
+		len += scnprintf(buf + len, PAGE_SIZE - len, "\n");
 	return len;
 }
 static DEVICE_ATTR(blacklist, S_IRUGO, sdev_show_blacklist, NULL);
@@ -1181,7 +1181,7 @@ static DEVICE_ATTR(queue_ramp_up_period, S_IRUGO | S_IWUSR,
 static umode_t scsi_sdev_attr_is_visible(struct kobject *kobj,
 					 struct attribute *attr, int i)
 {
-	struct device *dev = container_of(kobj, struct device, kobj);
+	struct device *dev = kobj_to_dev(kobj);
 	struct scsi_device *sdev = to_scsi_device(dev);
 
 
@@ -1207,7 +1207,7 @@ static umode_t scsi_sdev_attr_is_visible(struct kobject *kobj,
 static umode_t scsi_sdev_bin_attr_is_visible(struct kobject *kobj,
 					     struct bin_attribute *attr, int i)
 {
-	struct device *dev = container_of(kobj, struct device, kobj);
+	struct device *dev = kobj_to_dev(kobj);
 	struct scsi_device *sdev = to_scsi_device(dev);
 
 
diff --git a/drivers/scsi/scsi_trace.c b/drivers/scsi/scsi_trace.c
index ac35c30..41a9500 100644
--- a/drivers/scsi/scsi_trace.c
+++ b/drivers/scsi/scsi_trace.c
@@ -18,11 +18,9 @@ static const char *
 scsi_trace_rw6(struct trace_seq *p, unsigned char *cdb, int len)
 {
 	const char *ret = trace_seq_buffer_ptr(p);
-	u32 lba = 0, txlen;
+	u32 lba, txlen;
 
-	lba |= ((cdb[1] & 0x1F) << 16);
-	lba |=  (cdb[2] << 8);
-	lba |=   cdb[3];
+	lba = get_unaligned_be24(&cdb[1]) & 0x1fffff;
 	/*
 	 * From SBC-2: a TRANSFER LENGTH field set to zero specifies that 256
 	 * logical blocks shall be read (READ(6)) or written (WRITE(6)).
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index dfc726f..b2a803c 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -86,9 +86,17 @@ struct iscsi_internal {
 	struct transport_container session_cont;
 };
 
+/* Worker to perform connection failure on unresponsive connections
+ * completely in kernel space.
+ */
+static void stop_conn_work_fn(struct work_struct *work);
+static DECLARE_WORK(stop_conn_work, stop_conn_work_fn);
+
 static atomic_t iscsi_session_nr; /* sysfs session id for next new session */
 static struct workqueue_struct *iscsi_eh_timer_workq;
 
+static struct workqueue_struct *iscsi_destroy_workq;
+
 static DEFINE_IDA(iscsi_sess_ida);
 /*
  * list of registered transports and lock that must
@@ -1609,8 +1617,10 @@ static struct sock *nls;
 static DEFINE_MUTEX(rx_queue_mutex);
 
 static LIST_HEAD(sesslist);
+static LIST_HEAD(sessdestroylist);
 static DEFINE_SPINLOCK(sesslock);
 static LIST_HEAD(connlist);
+static LIST_HEAD(connlist_err);
 static DEFINE_SPINLOCK(connlock);
 
 static uint32_t iscsi_conn_get_sid(struct iscsi_cls_conn *conn)
@@ -2012,7 +2022,7 @@ static void __iscsi_unbind_session(struct work_struct *work)
 	if (session->target_id == ISCSI_MAX_TARGET) {
 		spin_unlock_irqrestore(&session->lock, flags);
 		mutex_unlock(&ihost->mutex);
-		return;
+		goto unbind_session_exit;
 	}
 
 	target_id = session->target_id;
@@ -2024,10 +2034,20 @@ static void __iscsi_unbind_session(struct work_struct *work)
 		ida_simple_remove(&iscsi_sess_ida, target_id);
 
 	scsi_remove_target(&session->dev);
+
+unbind_session_exit:
 	iscsi_session_event(session, ISCSI_KEVENT_UNBIND_SESSION);
 	ISCSI_DBG_TRANS_SESSION(session, "Completed target removal\n");
 }
 
+static void __iscsi_destroy_session(struct work_struct *work)
+{
+	struct iscsi_cls_session *session =
+		container_of(work, struct iscsi_cls_session, destroy_work);
+
+	session->transport->destroy_session(session);
+}
+
 struct iscsi_cls_session *
 iscsi_alloc_session(struct Scsi_Host *shost, struct iscsi_transport *transport,
 		    int dd_size)
@@ -2050,6 +2070,7 @@ iscsi_alloc_session(struct Scsi_Host *shost, struct iscsi_transport *transport,
 	INIT_WORK(&session->block_work, __iscsi_block_session);
 	INIT_WORK(&session->unbind_work, __iscsi_unbind_session);
 	INIT_WORK(&session->scan_work, iscsi_scan_session);
+	INIT_WORK(&session->destroy_work, __iscsi_destroy_session);
 	spin_lock_init(&session->lock);
 
 	/* this is released in the dev's release function */
@@ -2254,8 +2275,10 @@ iscsi_create_conn(struct iscsi_cls_session *session, int dd_size, uint32_t cid)
 
 	mutex_init(&conn->ep_mutex);
 	INIT_LIST_HEAD(&conn->conn_list);
+	INIT_LIST_HEAD(&conn->conn_list_err);
 	conn->transport = transport;
 	conn->cid = cid;
+	conn->state = ISCSI_CONN_DOWN;
 
 	/* this is released in the dev's release function */
 	if (!get_device(&session->dev))
@@ -2307,6 +2330,7 @@ int iscsi_destroy_conn(struct iscsi_cls_conn *conn)
 
 	spin_lock_irqsave(&connlock, flags);
 	list_del(&conn->conn_list);
+	list_del(&conn->conn_list_err);
 	spin_unlock_irqrestore(&connlock, flags);
 
 	transport_unregister_device(&conn->dev);
@@ -2421,6 +2445,51 @@ int iscsi_offload_mesg(struct Scsi_Host *shost,
 }
 EXPORT_SYMBOL_GPL(iscsi_offload_mesg);
 
+static void stop_conn_work_fn(struct work_struct *work)
+{
+	struct iscsi_cls_conn *conn, *tmp;
+	unsigned long flags;
+	LIST_HEAD(recovery_list);
+
+	spin_lock_irqsave(&connlock, flags);
+	if (list_empty(&connlist_err)) {
+		spin_unlock_irqrestore(&connlock, flags);
+		return;
+	}
+	list_splice_init(&connlist_err, &recovery_list);
+	spin_unlock_irqrestore(&connlock, flags);
+
+	list_for_each_entry_safe(conn, tmp, &recovery_list, conn_list_err) {
+		uint32_t sid = iscsi_conn_get_sid(conn);
+		struct iscsi_cls_session *session;
+
+		mutex_lock(&rx_queue_mutex);
+
+		session = iscsi_session_lookup(sid);
+		if (session) {
+			if (system_state != SYSTEM_RUNNING) {
+				session->recovery_tmo = 0;
+				conn->transport->stop_conn(conn,
+							   STOP_CONN_TERM);
+			} else {
+				conn->transport->stop_conn(conn,
+							   STOP_CONN_RECOVER);
+			}
+		}
+
+		list_del_init(&conn->conn_list_err);
+
+		mutex_unlock(&rx_queue_mutex);
+
+		/* we don't want to hold rx_queue_mutex for too long,
+		 * for instance if many conns failed at the same time,
+		 * since this stall other iscsi maintenance operations.
+		 * Give other users a chance to proceed.
+		 */
+		cond_resched();
+	}
+}
+
 void iscsi_conn_error_event(struct iscsi_cls_conn *conn, enum iscsi_err error)
 {
 	struct nlmsghdr	*nlh;
@@ -2428,6 +2497,12 @@ void iscsi_conn_error_event(struct iscsi_cls_conn *conn, enum iscsi_err error)
 	struct iscsi_uevent *ev;
 	struct iscsi_internal *priv;
 	int len = nlmsg_total_size(sizeof(*ev));
+	unsigned long flags;
+
+	spin_lock_irqsave(&connlock, flags);
+	list_add(&conn->conn_list_err, &connlist_err);
+	spin_unlock_irqrestore(&connlock, flags);
+	queue_work(system_unbound_wq, &stop_conn_work);
 
 	priv = iscsi_if_transport_lookup(conn->transport);
 	if (!priv)
@@ -2757,11 +2832,19 @@ static int
 iscsi_if_destroy_conn(struct iscsi_transport *transport, struct iscsi_uevent *ev)
 {
 	struct iscsi_cls_conn *conn;
+	unsigned long flags;
 
 	conn = iscsi_conn_lookup(ev->u.d_conn.sid, ev->u.d_conn.cid);
 	if (!conn)
 		return -EINVAL;
 
+	spin_lock_irqsave(&connlock, flags);
+	if (!list_empty(&conn->conn_list_err)) {
+		spin_unlock_irqrestore(&connlock, flags);
+		return -EAGAIN;
+	}
+	spin_unlock_irqrestore(&connlock, flags);
+
 	ISCSI_DBG_TRANS_CONN(conn, "Destroying transport conn\n");
 	if (transport->destroy_conn)
 		transport->destroy_conn(conn);
@@ -3563,6 +3646,23 @@ iscsi_if_recv_msg(struct sk_buff *skb, struct nlmsghdr *nlh, uint32_t *group)
 		else
 			transport->destroy_session(session);
 		break;
+	case ISCSI_UEVENT_DESTROY_SESSION_ASYNC:
+		session = iscsi_session_lookup(ev->u.d_session.sid);
+		if (!session)
+			err = -EINVAL;
+		else if (iscsi_session_has_conns(ev->u.d_session.sid))
+			err = -EBUSY;
+		else {
+			unsigned long flags;
+
+			/* Prevent this session from being found again */
+			spin_lock_irqsave(&sesslock, flags);
+			list_move(&session->sess_list, &sessdestroylist);
+			spin_unlock_irqrestore(&sesslock, flags);
+
+			queue_work(iscsi_destroy_workq, &session->destroy_work);
+		}
+		break;
 	case ISCSI_UEVENT_UNBIND_SESSION:
 		session = iscsi_session_lookup(ev->u.d_session.sid);
 		if (session)
@@ -3612,8 +3712,11 @@ iscsi_if_recv_msg(struct sk_buff *skb, struct nlmsghdr *nlh, uint32_t *group)
 		break;
 	case ISCSI_UEVENT_START_CONN:
 		conn = iscsi_conn_lookup(ev->u.start_conn.sid, ev->u.start_conn.cid);
-		if (conn)
+		if (conn) {
 			ev->r.retcode = transport->start_conn(conn);
+			if (!ev->r.retcode)
+				conn->state = ISCSI_CONN_UP;
+		}
 		else
 			err = -EINVAL;
 		break;
@@ -3810,6 +3913,26 @@ iscsi_conn_attr(tcp_xmit_wsf, ISCSI_PARAM_TCP_XMIT_WSF);
 iscsi_conn_attr(tcp_recv_wsf, ISCSI_PARAM_TCP_RECV_WSF);
 iscsi_conn_attr(local_ipaddr, ISCSI_PARAM_LOCAL_IPADDR);
 
+static const char *const connection_state_names[] = {
+	[ISCSI_CONN_UP] = "up",
+	[ISCSI_CONN_DOWN] = "down",
+	[ISCSI_CONN_FAILED] = "failed"
+};
+
+static ssize_t show_conn_state(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	struct iscsi_cls_conn *conn = iscsi_dev_to_conn(dev->parent);
+	const char *state = "unknown";
+
+	if (conn->state >= 0 &&
+	    conn->state < ARRAY_SIZE(connection_state_names))
+		state = connection_state_names[conn->state];
+
+	return sprintf(buf, "%s\n", state);
+}
+static ISCSI_CLASS_ATTR(conn, state, S_IRUGO, show_conn_state,
+			NULL);
 
 #define iscsi_conn_ep_attr_show(param)					\
 static ssize_t show_conn_ep_param_##param(struct device *dev,		\
@@ -3879,6 +4002,7 @@ static struct attribute *iscsi_conn_attrs[] = {
 	&dev_attr_conn_tcp_xmit_wsf.attr,
 	&dev_attr_conn_tcp_recv_wsf.attr,
 	&dev_attr_conn_local_ipaddr.attr,
+	&dev_attr_conn_state.attr,
 	NULL,
 };
 
@@ -3950,6 +4074,8 @@ static umode_t iscsi_conn_attr_is_visible(struct kobject *kobj,
 		param = ISCSI_PARAM_TCP_RECV_WSF;
 	else if (attr == &dev_attr_conn_local_ipaddr.attr)
 		param = ISCSI_PARAM_LOCAL_IPADDR;
+	else if (attr == &dev_attr_conn_state.attr)
+		return S_IRUGO;
 	else {
 		WARN_ONCE(1, "Invalid conn attr");
 		return 0;
@@ -4608,8 +4734,16 @@ static __init int iscsi_transport_init(void)
 		goto release_nls;
 	}
 
+	iscsi_destroy_workq = create_singlethread_workqueue("iscsi_destroy");
+	if (!iscsi_destroy_workq) {
+		err = -ENOMEM;
+		goto destroy_wq;
+	}
+
 	return 0;
 
+destroy_wq:
+	destroy_workqueue(iscsi_eh_timer_workq);
 release_nls:
 	netlink_kernel_release(nls);
 unregister_flashnode_bus:
@@ -4631,6 +4765,7 @@ static __init int iscsi_transport_init(void)
 
 static void __exit iscsi_transport_exit(void)
 {
+	destroy_workqueue(iscsi_destroy_workq);
 	destroy_workqueue(iscsi_eh_timer_workq);
 	netlink_kernel_release(nls);
 	bus_unregister(&iscsi_flashnode_bus);
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 4e6af59..9c0ee19 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -793,8 +793,10 @@ sg_common_write(Sg_fd * sfp, Sg_request * srp,
 			"sg_common_write:  scsi opcode=0x%02x, cmd_size=%d\n",
 			(int) cmnd[0], (int) hp->cmd_len));
 
-	if (hp->dxfer_len >= SZ_256M)
+	if (hp->dxfer_len >= SZ_256M) {
+		sg_remove_request(sfp, srp);
 		return -EINVAL;
+	}
 
 	k = sg_start_req(srp, cmnd);
 	if (k) {
diff --git a/drivers/scsi/smartpqi/Kconfig b/drivers/scsi/smartpqi/Kconfig
index bc65068..d3311c0 100644
--- a/drivers/scsi/smartpqi/Kconfig
+++ b/drivers/scsi/smartpqi/Kconfig
@@ -53,4 +53,4 @@
         Note: the aacraid driver will not manage a smartpqi
               controller. You need to enable smartpqi for smartpqi
               controllers. For more information, please see
-              Documentation/scsi/smartpqi.txt
+              Documentation/scsi/smartpqi.rst
diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index b749256..cd157f1 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -1614,28 +1614,28 @@ static void pqi_dev_info(struct pqi_ctrl_info *ctrl_info,
 		"%d:%d:", ctrl_info->scsi_host->host_no, device->bus);
 
 	if (device->target_lun_valid)
-		count += snprintf(buffer + count,
+		count += scnprintf(buffer + count,
 			PQI_DEV_INFO_BUFFER_LENGTH - count,
 			"%d:%d",
 			device->target,
 			device->lun);
 	else
-		count += snprintf(buffer + count,
+		count += scnprintf(buffer + count,
 			PQI_DEV_INFO_BUFFER_LENGTH - count,
 			"-:-");
 
 	if (pqi_is_logical_device(device))
-		count += snprintf(buffer + count,
+		count += scnprintf(buffer + count,
 			PQI_DEV_INFO_BUFFER_LENGTH - count,
 			" %08x%08x",
 			*((u32 *)&device->scsi3addr),
 			*((u32 *)&device->scsi3addr[4]));
 	else
-		count += snprintf(buffer + count,
+		count += scnprintf(buffer + count,
 			PQI_DEV_INFO_BUFFER_LENGTH - count,
 			" %016llx", device->sas_address);
 
-	count += snprintf(buffer + count, PQI_DEV_INFO_BUFFER_LENGTH - count,
+	count += scnprintf(buffer + count, PQI_DEV_INFO_BUFFER_LENGTH - count,
 		" %s %.8s %.16s ",
 		pqi_device_type(device),
 		device->vendor,
@@ -1643,19 +1643,19 @@ static void pqi_dev_info(struct pqi_ctrl_info *ctrl_info,
 
 	if (pqi_is_logical_device(device)) {
 		if (device->devtype == TYPE_DISK)
-			count += snprintf(buffer + count,
+			count += scnprintf(buffer + count,
 				PQI_DEV_INFO_BUFFER_LENGTH - count,
 				"SSDSmartPathCap%c En%c %-12s",
 				device->raid_bypass_configured ? '+' : '-',
 				device->raid_bypass_enabled ? '+' : '-',
 				pqi_raid_level_to_string(device->raid_level));
 	} else {
-		count += snprintf(buffer + count,
+		count += scnprintf(buffer + count,
 			PQI_DEV_INFO_BUFFER_LENGTH - count,
 			"AIO%c", device->aio_enabled ? '+' : '-');
 		if (device->devtype == TYPE_DISK ||
 			device->devtype == TYPE_ZBC)
-			count += snprintf(buffer + count,
+			count += scnprintf(buffer + count,
 				PQI_DEV_INFO_BUFFER_LENGTH - count,
 				" qd=%-6d", device->queue_depth);
 	}
@@ -6191,14 +6191,14 @@ static ssize_t pqi_lockup_action_show(struct device *dev,
 
 	for (i = 0; i < ARRAY_SIZE(pqi_lockup_actions); i++) {
 		if (pqi_lockup_actions[i].action == pqi_lockup_action)
-			count += snprintf(buffer + count, PAGE_SIZE - count,
+			count += scnprintf(buffer + count, PAGE_SIZE - count,
 				"[%s] ", pqi_lockup_actions[i].name);
 		else
-			count += snprintf(buffer + count, PAGE_SIZE - count,
+			count += scnprintf(buffer + count, PAGE_SIZE - count,
 				"%s ", pqi_lockup_actions[i].name);
 	}
 
-	count += snprintf(buffer + count, PAGE_SIZE - count, "\n");
+	count += scnprintf(buffer + count, PAGE_SIZE - count, "\n");
 
 	return count;
 }
diff --git a/drivers/scsi/snic/vnic_devcmd.h b/drivers/scsi/snic/vnic_devcmd.h
index d81b4f0..0e0fa38 100644
--- a/drivers/scsi/snic/vnic_devcmd.h
+++ b/drivers/scsi/snic/vnic_devcmd.h
@@ -208,7 +208,7 @@ struct vnic_devcmd_notify {
 struct vnic_devcmd_provinfo {
 	u8 oui[3];
 	u8 type;
-	u8 data[0];
+	u8 data[];
 };
 
 /*
diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index e4240e4..d2fe3fa 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -79,7 +79,6 @@ MODULE_ALIAS_SCSI_DEVICE(TYPE_WORM);
 	 CDC_CD_R|CDC_CD_RW|CDC_DVD|CDC_DVD_R|CDC_DVD_RAM|CDC_GENERIC_PACKET| \
 	 CDC_MRW|CDC_MRW_W|CDC_RAM)
 
-static DEFINE_MUTEX(sr_mutex);
 static int sr_probe(struct device *);
 static int sr_remove(struct device *);
 static blk_status_t sr_init_command(struct scsi_cmnd *SCpnt);
@@ -536,9 +535,9 @@ static int sr_block_open(struct block_device *bdev, fmode_t mode)
 	scsi_autopm_get_device(sdev);
 	check_disk_change(bdev);
 
-	mutex_lock(&sr_mutex);
+	mutex_lock(&cd->lock);
 	ret = cdrom_open(&cd->cdi, bdev, mode);
-	mutex_unlock(&sr_mutex);
+	mutex_unlock(&cd->lock);
 
 	scsi_autopm_put_device(sdev);
 	if (ret)
@@ -551,10 +550,12 @@ static int sr_block_open(struct block_device *bdev, fmode_t mode)
 static void sr_block_release(struct gendisk *disk, fmode_t mode)
 {
 	struct scsi_cd *cd = scsi_cd(disk);
-	mutex_lock(&sr_mutex);
+
+	mutex_lock(&cd->lock);
 	cdrom_release(&cd->cdi, mode);
+	mutex_unlock(&cd->lock);
+
 	scsi_cd_put(cd);
-	mutex_unlock(&sr_mutex);
 }
 
 static int sr_block_ioctl(struct block_device *bdev, fmode_t mode, unsigned cmd,
@@ -565,7 +566,7 @@ static int sr_block_ioctl(struct block_device *bdev, fmode_t mode, unsigned cmd,
 	void __user *argp = (void __user *)arg;
 	int ret;
 
-	mutex_lock(&sr_mutex);
+	mutex_lock(&cd->lock);
 
 	ret = scsi_ioctl_block_when_processing_errors(sdev, cmd,
 			(mode & FMODE_NDELAY) != 0);
@@ -595,7 +596,7 @@ static int sr_block_ioctl(struct block_device *bdev, fmode_t mode, unsigned cmd,
 	scsi_autopm_put_device(sdev);
 
 out:
-	mutex_unlock(&sr_mutex);
+	mutex_unlock(&cd->lock);
 	return ret;
 }
 
@@ -608,7 +609,7 @@ static int sr_block_compat_ioctl(struct block_device *bdev, fmode_t mode, unsign
 	void __user *argp = compat_ptr(arg);
 	int ret;
 
-	mutex_lock(&sr_mutex);
+	mutex_lock(&cd->lock);
 
 	ret = scsi_ioctl_block_when_processing_errors(sdev, cmd,
 			(mode & FMODE_NDELAY) != 0);
@@ -638,7 +639,7 @@ static int sr_block_compat_ioctl(struct block_device *bdev, fmode_t mode, unsign
 	scsi_autopm_put_device(sdev);
 
 out:
-	mutex_unlock(&sr_mutex);
+	mutex_unlock(&cd->lock);
 	return ret;
 
 }
@@ -745,6 +746,7 @@ static int sr_probe(struct device *dev)
 	disk = alloc_disk(1);
 	if (!disk)
 		goto fail_free;
+	mutex_init(&cd->lock);
 
 	spin_lock(&sr_index_lock);
 	minor = find_first_zero_bit(sr_index_bits, SR_DISKS);
@@ -1055,6 +1057,8 @@ static void sr_kref_release(struct kref *kref)
 
 	put_disk(disk);
 
+	mutex_destroy(&cd->lock);
+
 	kfree(cd);
 }
 
diff --git a/drivers/scsi/sr.h b/drivers/scsi/sr.h
index a2bb7b8..339c624 100644
--- a/drivers/scsi/sr.h
+++ b/drivers/scsi/sr.h
@@ -20,6 +20,7 @@
 
 #include <linux/genhd.h>
 #include <linux/kref.h>
+#include <linux/mutex.h>
 
 #define MAX_RETRIES	3
 #define SR_TIMEOUT	(30 * HZ)
@@ -51,6 +52,7 @@ typedef struct scsi_cd {
 	bool ignore_get_event:1;	/* GET_EVENT is unreliable, use TUR */
 
 	struct cdrom_device_info cdi;
+	struct mutex lock;
 	/* We hold gendisk and scsi_device references on probe and use
 	 * the refs on this kref to decide when to release them */
 	struct kref kref;
diff --git a/drivers/scsi/sr_vendor.c b/drivers/scsi/sr_vendor.c
index 17a56c8..1f988a1 100644
--- a/drivers/scsi/sr_vendor.c
+++ b/drivers/scsi/sr_vendor.c
@@ -67,9 +67,6 @@
 
 void sr_vendor_init(Scsi_CD *cd)
 {
-#ifndef CONFIG_BLK_DEV_SR_VENDOR
-	cd->vendor = VENDOR_SCSI3;
-#else
 	const char *vendor = cd->device->vendor;
 	const char *model = cd->device->model;
 	
@@ -118,7 +115,6 @@ void sr_vendor_init(Scsi_CD *cd)
 			CDC_PLAY_AUDIO
 			);
 	}
-#endif
 }
 
 
@@ -132,10 +128,8 @@ int sr_set_blocklength(Scsi_CD *cd, int blocklength)
 	struct ccs_modesel_head *modesel;
 	int rc, density = 0;
 
-#ifdef CONFIG_BLK_DEV_SR_VENDOR
 	if (cd->vendor == VENDOR_TOSHIBA)
 		density = (blocklength > 2048) ? 0x81 : 0x83;
-#endif
 
 	buffer = kmalloc(512, GFP_KERNEL | GFP_DMA);
 	if (!buffer)
@@ -223,7 +217,6 @@ int sr_cd_check(struct cdrom_device_info *cdi)
 		}
 		break;
 
-#ifdef CONFIG_BLK_DEV_SR_VENDOR
 	case VENDOR_NEC:{
 			unsigned long min, sec, frame;
 			cgc.cmd[0] = 0xde;
@@ -316,7 +309,6 @@ int sr_cd_check(struct cdrom_device_info *cdi)
 		sector = buffer[11] + (buffer[10] << 8) +
 		    (buffer[9] << 16) + (buffer[8] << 24);
 		break;
-#endif				/* CONFIG_BLK_DEV_SR_VENDOR */
 
 	default:
 		/* should not happen */
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index 393f301..c5f9b34 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
    SCSI Tape Driver for Linux version 1.1 and newer. See the accompanying
-   file Documentation/scsi/st.txt for more information.
+   file Documentation/scsi/st.rst for more information.
 
    History:
    Rewritten from Dwayne Forsyth's SCSI tape driver by Kai Makisara.
@@ -45,6 +45,7 @@ static const char *verstr = "20160209";
 
 #include <linux/uaccess.h>
 #include <asm/dma.h>
+#include <asm/unaligned.h>
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_dbg.h>
@@ -2680,8 +2681,7 @@ static void deb_space_print(struct scsi_tape *STp, int direction, char *units, u
 	if (!debugging)
 		return;
 
-	sc = cmd[2] & 0x80 ? 0xff000000 : 0;
-	sc |= (cmd[2] << 16) | (cmd[3] << 8) | cmd[4];
+	sc = sign_extend32(get_unaligned_be24(&cmd[2]), 23);
 	if (direction)
 		sc = -sc;
 	st_printk(ST_DEB_MSG, STp, "Spacing tape %s over %d %s.\n",
diff --git a/drivers/scsi/stex.c b/drivers/scsi/stex.c
index 33287b6..d4f10c0 100644
--- a/drivers/scsi/stex.c
+++ b/drivers/scsi/stex.c
@@ -236,7 +236,7 @@ struct req_msg {
 	u8 data_dir;
 	u8 payload_sz;		/* payload size in 4-byte, not used */
 	u8 cdb[STEX_CDB_LENGTH];
-	u32 variable[0];
+	u32 variable[];
 };
 
 struct status_msg {
diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig
index d14c224..e2005ae 100644
--- a/drivers/scsi/ufs/Kconfig
+++ b/drivers/scsi/ufs/Kconfig
@@ -46,7 +46,7 @@
 	  The module will be called ufshcd.
 
 	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/scsi/ufs.txt>.
+	  <file:Documentation/scsi/ufs.rst>.
 	  However, do not compile this as a module if your root file system
 	  (the one containing the directory /) is located on a UFS device.
 
diff --git a/drivers/scsi/ufs/cdns-pltfrm.c b/drivers/scsi/ufs/cdns-pltfrm.c
index 56a6a1e..da065a2 100644
--- a/drivers/scsi/ufs/cdns-pltfrm.c
+++ b/drivers/scsi/ufs/cdns-pltfrm.c
@@ -192,7 +192,7 @@ static int cdns_ufs_link_startup_notify(struct ufs_hba *hba,
 	 * and device TX LCC are disabled once link startup is
 	 * completed.
 	 */
-	ufshcd_dme_set(hba, UIC_ARG_MIB(PA_LOCAL_TX_LCC_ENABLE), 0);
+	ufshcd_disable_host_tx_lcc(hba);
 
 	/*
 	 * Disabling Autohibern8 feature in cadence UFS
diff --git a/drivers/scsi/ufs/ufs-hisi.c b/drivers/scsi/ufs/ufs-hisi.c
index 5d64873..074a6a0 100644
--- a/drivers/scsi/ufs/ufs-hisi.c
+++ b/drivers/scsi/ufs/ufs-hisi.c
@@ -235,7 +235,7 @@ static int ufs_hisi_link_startup_pre_change(struct ufs_hba *hba)
 	ufshcd_writel(hba, reg, REG_AUTO_HIBERNATE_IDLE_TIMER);
 
 	/* Unipro PA_Local_TX_LCC_Enable */
-	ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x155E, 0x0), 0x0);
+	ufshcd_disable_host_tx_lcc(hba);
 	/* close Unipro VS_Mk2ExtnSupport */
 	ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0xD0AB, 0x0), 0x0);
 	ufshcd_dme_get(hba, UIC_ARG_MIB_SEL(0xD0AB, 0x0), &value);
diff --git a/drivers/scsi/ufs/ufs-mediatek.c b/drivers/scsi/ufs/ufs-mediatek.c
index 53eae5fe..673c165 100644
--- a/drivers/scsi/ufs/ufs-mediatek.c
+++ b/drivers/scsi/ufs/ufs-mediatek.c
@@ -66,6 +66,21 @@ static void ufs_mtk_cfg_unipro_cg(struct ufs_hba *hba, bool enable)
 	}
 }
 
+static int ufs_mtk_hce_enable_notify(struct ufs_hba *hba,
+				     enum ufs_notify_change_status status)
+{
+	struct ufs_mtk_host *host = ufshcd_get_variant(hba);
+
+	if (status == PRE_CHANGE) {
+		if (host->unipro_lpm)
+			hba->hba_enable_delay_us = 0;
+		else
+			hba->hba_enable_delay_us = 600;
+	}
+
+	return 0;
+}
+
 static int ufs_mtk_bind_mphy(struct ufs_hba *hba)
 {
 	struct ufs_mtk_host *host = ufshcd_get_variant(hba);
@@ -107,6 +122,7 @@ static int ufs_mtk_setup_ref_clk(struct ufs_hba *hba, bool on)
 
 	if (on) {
 		ufs_mtk_ref_clk_notify(on, res);
+		ufshcd_delay_us(host->ref_clk_ungating_wait_us, 10);
 		ufshcd_writel(hba, REFCLK_REQUEST, REG_UFS_REFCLK_CTRL);
 	} else {
 		ufshcd_writel(hba, REFCLK_RELEASE, REG_UFS_REFCLK_CTRL);
@@ -132,12 +148,40 @@ static int ufs_mtk_setup_ref_clk(struct ufs_hba *hba, bool on)
 
 out:
 	host->ref_clk_enabled = on;
-	if (!on)
+	if (!on) {
+		ufshcd_delay_us(host->ref_clk_gating_wait_us, 10);
 		ufs_mtk_ref_clk_notify(on, res);
+	}
 
 	return 0;
 }
 
+static void ufs_mtk_setup_ref_clk_wait_us(struct ufs_hba *hba,
+					  u16 gating_us, u16 ungating_us)
+{
+	struct ufs_mtk_host *host = ufshcd_get_variant(hba);
+
+	if (hba->dev_info.clk_gating_wait_us) {
+		host->ref_clk_gating_wait_us =
+			hba->dev_info.clk_gating_wait_us;
+	} else {
+		host->ref_clk_gating_wait_us = gating_us;
+	}
+
+	host->ref_clk_ungating_wait_us = ungating_us;
+}
+
+static u32 ufs_mtk_link_get_state(struct ufs_hba *hba)
+{
+	u32 val;
+
+	ufshcd_writel(hba, 0x20, REG_UFS_DEBUG_SEL);
+	val = ufshcd_readl(hba, REG_UFS_PROBE);
+	val = val >> 28;
+
+	return val;
+}
+
 /**
  * ufs_mtk_setup_clocks - enables/disable clocks
  * @hba: host controller instance
@@ -150,7 +194,7 @@ static int ufs_mtk_setup_clocks(struct ufs_hba *hba, bool on,
 				enum ufs_notify_change_status status)
 {
 	struct ufs_mtk_host *host = ufshcd_get_variant(hba);
-	int ret = -EINVAL;
+	int ret = 0;
 
 	/*
 	 * In case ufs_mtk_init() is not yet done, simply ignore.
@@ -160,19 +204,24 @@ static int ufs_mtk_setup_clocks(struct ufs_hba *hba, bool on,
 	if (!host)
 		return 0;
 
-	switch (status) {
-	case PRE_CHANGE:
-		if (!on) {
+	if (!on && status == PRE_CHANGE) {
+		if (!ufshcd_is_link_active(hba)) {
 			ufs_mtk_setup_ref_clk(hba, on);
 			ret = phy_power_off(host->mphy);
+		} else {
+			/*
+			 * Gate ref-clk if link state is in Hibern8
+			 * triggered by Auto-Hibern8.
+			 */
+			if (!ufshcd_can_hibern8_during_gating(hba) &&
+			    ufshcd_is_auto_hibern8_enabled(hba) &&
+			    ufs_mtk_link_get_state(hba) ==
+			    VS_LINK_HIBERN8)
+				ufs_mtk_setup_ref_clk(hba, on);
 		}
-		break;
-	case POST_CHANGE:
-		if (on) {
-			ret = phy_power_on(host->mphy);
-			ufs_mtk_setup_ref_clk(hba, on);
-		}
-		break;
+	} else if (on && status == POST_CHANGE) {
+		ret = phy_power_on(host->mphy);
+		ufs_mtk_setup_ref_clk(hba, on);
 	}
 
 	return ret;
@@ -285,11 +334,36 @@ static int ufs_mtk_pwr_change_notify(struct ufs_hba *hba,
 	return ret;
 }
 
+static int ufs_mtk_unipro_set_pm(struct ufs_hba *hba, u32 lpm)
+{
+	int ret;
+	struct ufs_mtk_host *host = ufshcd_get_variant(hba);
+
+	ret = ufshcd_dme_set(hba,
+			     UIC_ARG_MIB_SEL(VS_UNIPROPOWERDOWNCONTROL, 0),
+			     lpm);
+	if (!ret)
+		host->unipro_lpm = lpm;
+
+	return ret;
+}
+
 static int ufs_mtk_pre_link(struct ufs_hba *hba)
 {
 	int ret;
 	u32 tmp;
 
+	ufs_mtk_unipro_set_pm(hba, 0);
+
+	/*
+	 * Setting PA_Local_TX_LCC_Enable to 0 before link startup
+	 * to make sure that both host and device TX LCC are disabled
+	 * once link startup is completed.
+	 */
+	ret = ufshcd_disable_host_tx_lcc(hba);
+	if (ret)
+		return ret;
+
 	/* disable deep stall */
 	ret = ufshcd_dme_get(hba, UIC_ARG_MIB(VS_SAVEPOWERCONTROL), &tmp);
 	if (ret)
@@ -321,9 +395,6 @@ static void ufs_mtk_setup_clk_gating(struct ufs_hba *hba)
 
 static int ufs_mtk_post_link(struct ufs_hba *hba)
 {
-	/* disable device LCC */
-	ufshcd_dme_set(hba, UIC_ARG_MIB(PA_LOCAL_TX_LCC_ENABLE), 0);
-
 	/* enable unipro clock gating feature */
 	ufs_mtk_cfg_unipro_cg(hba, true);
 
@@ -390,9 +461,7 @@ static int ufs_mtk_link_set_hpm(struct ufs_hba *hba)
 	if (err)
 		return err;
 
-	err = ufshcd_dme_set(hba,
-			     UIC_ARG_MIB_SEL(VS_UNIPROPOWERDOWNCONTROL, 0),
-			     0);
+	err = ufs_mtk_unipro_set_pm(hba, 0);
 	if (err)
 		return err;
 
@@ -413,14 +482,10 @@ static int ufs_mtk_link_set_lpm(struct ufs_hba *hba)
 {
 	int err;
 
-	err = ufshcd_dme_set(hba,
-			     UIC_ARG_MIB_SEL(VS_UNIPROPOWERDOWNCONTROL, 0),
-			     1);
+	err = ufs_mtk_unipro_set_pm(hba, 1);
 	if (err) {
 		/* Resume UniPro state for following error recovery */
-		ufshcd_dme_set(hba,
-			       UIC_ARG_MIB_SEL(VS_UNIPROPOWERDOWNCONTROL, 0),
-			       0);
+		ufs_mtk_unipro_set_pm(hba, 0);
 		return err;
 	}
 
@@ -434,12 +499,20 @@ static int ufs_mtk_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 
 	if (ufshcd_is_link_hibern8(hba)) {
 		err = ufs_mtk_link_set_lpm(hba);
-		if (err)
+		if (err) {
+			/*
+			 * Set link as off state enforcedly to trigger
+			 * ufshcd_host_reset_and_restore() in ufshcd_suspend()
+			 * for completed host reset.
+			 */
+			ufshcd_set_link_off(hba);
 			return -EAGAIN;
-		phy_power_off(host->mphy);
-		ufs_mtk_setup_ref_clk(hba, false);
+		}
 	}
 
+	if (!ufshcd_is_link_active(hba))
+		phy_power_off(host->mphy);
+
 	return 0;
 }
 
@@ -448,12 +521,15 @@ static int ufs_mtk_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 	struct ufs_mtk_host *host = ufshcd_get_variant(hba);
 	int err;
 
-	if (ufshcd_is_link_hibern8(hba)) {
-		ufs_mtk_setup_ref_clk(hba, true);
+	if (!ufshcd_is_link_active(hba))
 		phy_power_on(host->mphy);
+
+	if (ufshcd_is_link_hibern8(hba)) {
 		err = ufs_mtk_link_set_hpm(hba);
-		if (err)
+		if (err) {
+			err = ufshcd_link_recovery(hba);
 			return err;
+		}
 	}
 
 	return 0;
@@ -477,9 +553,24 @@ static void ufs_mtk_dbg_register_dump(struct ufs_hba *hba)
 static int ufs_mtk_apply_dev_quirks(struct ufs_hba *hba)
 {
 	struct ufs_dev_info *dev_info = &hba->dev_info;
+	u16 mid = dev_info->wmanufacturerid;
 
-	if (dev_info->wmanufacturerid == UFS_VENDOR_SAMSUNG)
+	if (mid == UFS_VENDOR_SAMSUNG) {
+		hba->dev_quirks &= ~UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE;
 		ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TACTIVATE), 6);
+	}
+
+	/*
+	 * Decide waiting time before gating reference clock and
+	 * after ungating reference clock according to vendors'
+	 * requirements.
+	 */
+	if (mid == UFS_VENDOR_SAMSUNG)
+		ufs_mtk_setup_ref_clk_wait_us(hba, 1, 1);
+	else if (mid == UFS_VENDOR_SKHYNIX)
+		ufs_mtk_setup_ref_clk_wait_us(hba, 30, 30);
+	else if (mid == UFS_VENDOR_TOSHIBA)
+		ufs_mtk_setup_ref_clk_wait_us(hba, 100, 32);
 
 	return 0;
 }
@@ -494,6 +585,7 @@ static struct ufs_hba_variant_ops ufs_hba_mtk_vops = {
 	.name                = "mediatek.ufshci",
 	.init                = ufs_mtk_init,
 	.setup_clocks        = ufs_mtk_setup_clocks,
+	.hce_enable_notify   = ufs_mtk_hce_enable_notify,
 	.link_startup_notify = ufs_mtk_link_startup_notify,
 	.pwr_change_notify   = ufs_mtk_pwr_change_notify,
 	.apply_dev_quirks    = ufs_mtk_apply_dev_quirks,
diff --git a/drivers/scsi/ufs/ufs-mediatek.h b/drivers/scsi/ufs/ufs-mediatek.h
index fccdd97..5bbd3e9 100644
--- a/drivers/scsi/ufs/ufs-mediatek.h
+++ b/drivers/scsi/ufs/ufs-mediatek.h
@@ -54,6 +54,18 @@
 #define VS_UNIPROPOWERDOWNCONTROL   0xD0A8
 
 /*
+ * Vendor specific link state
+ */
+enum {
+	VS_LINK_DISABLED            = 0,
+	VS_LINK_DOWN                = 1,
+	VS_LINK_UP                  = 2,
+	VS_LINK_HIBERN8             = 3,
+	VS_LINK_LOST                = 4,
+	VS_LINK_CFG                 = 5,
+};
+
+/*
  * SiP commands
  */
 #define MTK_SIP_UFS_CONTROL               MTK_SIP_SMC_CMD(0x276)
@@ -79,7 +91,10 @@ enum {
 struct ufs_mtk_host {
 	struct ufs_hba *hba;
 	struct phy *mphy;
+	bool unipro_lpm;
 	bool ref_clk_enabled;
+	u16 ref_clk_ungating_wait_us;
+	u16 ref_clk_gating_wait_us;
 };
 
 #endif /* !_UFS_MEDIATEK_H */
diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
index c69c29a1c..19aa5c4 100644
--- a/drivers/scsi/ufs/ufs-qcom.c
+++ b/drivers/scsi/ufs/ufs-qcom.c
@@ -10,6 +10,7 @@
 #include <linux/phy/phy.h>
 #include <linux/gpio/consumer.h>
 #include <linux/reset-controller.h>
+#include <linux/devfreq.h>
 
 #include "ufshcd.h"
 #include "ufshcd-pltfrm.h"
@@ -38,7 +39,6 @@ enum {
 
 static struct ufs_qcom_host *ufs_qcom_hosts[MAX_UFS_QCOM_HOSTS];
 
-static int ufs_qcom_set_bus_vote(struct ufs_qcom_host *host, int vote);
 static void ufs_qcom_get_default_testbus_cfg(struct ufs_qcom_host *host);
 static int ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(struct ufs_hba *hba,
 						       u32 clk_cycles);
@@ -554,9 +554,7 @@ static int ufs_qcom_link_startup_notify(struct ufs_hba *hba,
 		 * completed.
 		 */
 		if (ufshcd_get_local_unipro_ver(hba) != UFS_UNIPRO_VER_1_41)
-			err = ufshcd_dme_set(hba,
-					UIC_ARG_MIB(PA_LOCAL_TX_LCC_ENABLE),
-					0);
+			err = ufshcd_disable_host_tx_lcc(hba);
 
 		break;
 	case POST_CHANGE:
@@ -674,7 +672,7 @@ static void ufs_qcom_get_speed_mode(struct ufs_pa_layer_attr *p, char *result)
 	}
 }
 
-static int ufs_qcom_set_bus_vote(struct ufs_qcom_host *host, int vote)
+static int __ufs_qcom_set_bus_vote(struct ufs_qcom_host *host, int vote)
 {
 	int err = 0;
 
@@ -705,7 +703,7 @@ static int ufs_qcom_update_bus_bw_vote(struct ufs_qcom_host *host)
 
 	vote = ufs_qcom_get_bus_vote(host, mode);
 	if (vote >= 0)
-		err = ufs_qcom_set_bus_vote(host, vote);
+		err = __ufs_qcom_set_bus_vote(host, vote);
 	else
 		err = vote;
 
@@ -716,6 +714,35 @@ static int ufs_qcom_update_bus_bw_vote(struct ufs_qcom_host *host)
 	return err;
 }
 
+static int ufs_qcom_set_bus_vote(struct ufs_hba *hba, bool on)
+{
+	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+	int vote, err;
+
+	/*
+	 * In case ufs_qcom_init() is not yet done, simply ignore.
+	 * This ufs_qcom_set_bus_vote() shall be called from
+	 * ufs_qcom_init() after init is done.
+	 */
+	if (!host)
+		return 0;
+
+	if (on) {
+		vote = host->bus_vote.saved_vote;
+		if (vote == host->bus_vote.min_bw_vote)
+			ufs_qcom_update_bus_bw_vote(host);
+	} else {
+		vote = host->bus_vote.min_bw_vote;
+	}
+
+	err = __ufs_qcom_set_bus_vote(host, vote);
+	if (err)
+		dev_err(hba->dev, "%s: set bus vote failed %d\n",
+				 __func__, err);
+
+	return err;
+}
+
 static ssize_t
 show_ufs_to_mem_max_bus_bw(struct device *dev, struct device_attribute *attr,
 			char *buf)
@@ -792,7 +819,7 @@ static int ufs_qcom_update_bus_bw_vote(struct ufs_qcom_host *host)
 	return 0;
 }
 
-static int ufs_qcom_set_bus_vote(struct ufs_qcom_host *host, int vote)
+static int ufs_qcom_set_bus_vote(struct ufs_hba *host, bool on)
 {
 	return 0;
 }
@@ -817,11 +844,27 @@ static void ufs_qcom_dev_ref_clk_ctrl(struct ufs_qcom_host *host, bool enable)
 		/*
 		 * If we are here to disable this clock it might be immediately
 		 * after entering into hibern8 in which case we need to make
-		 * sure that device ref_clk is active at least 1us after the
+		 * sure that device ref_clk is active for specific time after
 		 * hibern8 enter.
 		 */
-		if (!enable)
-			udelay(1);
+		if (!enable) {
+			unsigned long gating_wait;
+
+			gating_wait = host->hba->dev_info.clk_gating_wait_us;
+			if (!gating_wait) {
+				udelay(1);
+			} else {
+				/*
+				 * bRefClkGatingWaitTime defines the minimum
+				 * time for which the reference clock is
+				 * required by device during transition from
+				 * HS-MODE to LS-MODE or HIBERN8 state. Give it
+				 * more delay to be on the safe side.
+				 */
+				gating_wait += 10;
+				usleep_range(gating_wait, gating_wait + 10);
+			}
+		}
 
 		writel_relaxed(temp, host->dev_ref_clk_ctrl_mmio);
 
@@ -898,6 +941,20 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba,
 		if (!ufshcd_is_hs_mode(&hba->pwr_info) &&
 			ufshcd_is_hs_mode(dev_req_params))
 			ufs_qcom_dev_ref_clk_ctrl(host, true);
+
+		if (host->hw_ver.major >= 0x4) {
+			if (dev_req_params->gear_tx == UFS_HS_G4) {
+				/* INITIAL ADAPT */
+				ufshcd_dme_set(hba,
+					       UIC_ARG_MIB(PA_TXHSADAPTTYPE),
+					       PA_INITIAL_ADAPT);
+			} else {
+				/* NO ADAPT */
+				ufshcd_dme_set(hba,
+					       UIC_ARG_MIB(PA_TXHSADAPTTYPE),
+					       PA_NO_ADAPT);
+			}
+		}
 		break;
 	case POST_CHANGE:
 		if (ufs_qcom_cfg_timers(hba, dev_req_params->gear_rx,
@@ -956,6 +1013,9 @@ static int ufs_qcom_apply_dev_quirks(struct ufs_hba *hba)
 	if (hba->dev_quirks & UFS_DEVICE_QUIRK_HOST_PA_SAVECONFIGTIME)
 		err = ufs_qcom_quirk_host_pa_saveconfigtime(hba);
 
+	if (hba->dev_info.wmanufacturerid == UFS_VENDOR_WDC)
+		hba->dev_quirks |= UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE;
+
 	return err;
 }
 
@@ -1030,8 +1090,7 @@ static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on,
 				 enum ufs_notify_change_status status)
 {
 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
-	int err;
-	int vote = 0;
+	int err = 0;
 
 	/*
 	 * In case ufs_qcom_init() is not yet done, simply ignore.
@@ -1041,28 +1100,28 @@ static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on,
 	if (!host)
 		return 0;
 
-	if (on && (status == POST_CHANGE)) {
-		/* enable the device ref clock for HS mode*/
-		if (ufshcd_is_hs_mode(&hba->pwr_info))
-			ufs_qcom_dev_ref_clk_ctrl(host, true);
-		vote = host->bus_vote.saved_vote;
-		if (vote == host->bus_vote.min_bw_vote)
-			ufs_qcom_update_bus_bw_vote(host);
-
-	} else if (!on && (status == PRE_CHANGE)) {
-		if (!ufs_qcom_is_link_active(hba)) {
-			/* disable device ref_clk */
-			ufs_qcom_dev_ref_clk_ctrl(host, false);
+	switch (status) {
+	case PRE_CHANGE:
+		if (on) {
+			err = ufs_qcom_set_bus_vote(hba, true);
+		} else {
+			if (!ufs_qcom_is_link_active(hba)) {
+				/* disable device ref_clk */
+				ufs_qcom_dev_ref_clk_ctrl(host, false);
+			}
 		}
-
-		vote = host->bus_vote.min_bw_vote;
+		break;
+	case POST_CHANGE:
+		if (on) {
+			/* enable the device ref clock for HS mode*/
+			if (ufshcd_is_hs_mode(&hba->pwr_info))
+				ufs_qcom_dev_ref_clk_ctrl(host, true);
+		} else {
+			err = ufs_qcom_set_bus_vote(hba, false);
+		}
+		break;
 	}
 
-	err = ufs_qcom_set_bus_vote(host, vote);
-	if (err)
-		dev_err(hba->dev, "%s: set bus vote failed %d\n",
-				__func__, err);
-
 	return err;
 }
 
@@ -1238,6 +1297,7 @@ static int ufs_qcom_init(struct ufs_hba *hba)
 	ufs_qcom_set_caps(hba);
 	ufs_qcom_advertise_quirks(hba);
 
+	ufs_qcom_set_bus_vote(hba, true);
 	ufs_qcom_setup_clocks(hba, true, POST_CHANGE);
 
 	if (hba->dev->id < MAX_UFS_QCOM_HOSTS)
@@ -1630,6 +1690,29 @@ static void ufs_qcom_device_reset(struct ufs_hba *hba)
 	usleep_range(10, 15);
 }
 
+#if IS_ENABLED(CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND)
+static void ufs_qcom_config_scaling_param(struct ufs_hba *hba,
+					  struct devfreq_dev_profile *p,
+					  void *data)
+{
+	static struct devfreq_simple_ondemand_data *d;
+
+	if (!data)
+		return;
+
+	d = (struct devfreq_simple_ondemand_data *)data;
+	p->polling_ms = 60;
+	d->upthreshold = 70;
+	d->downdifferential = 5;
+}
+#else
+static void ufs_qcom_config_scaling_param(struct ufs_hba *hba,
+					  struct devfreq_dev_profile *p,
+					  void *data)
+{
+}
+#endif
+
 /**
  * struct ufs_hba_qcom_vops - UFS QCOM specific variant operations
  *
@@ -1651,6 +1734,7 @@ static const struct ufs_hba_variant_ops ufs_hba_qcom_vops = {
 	.resume			= ufs_qcom_resume,
 	.dbg_register_dump	= ufs_qcom_dump_dbg_regs,
 	.device_reset		= ufs_qcom_device_reset,
+	.config_scaling_param = ufs_qcom_config_scaling_param,
 };
 
 /**
diff --git a/drivers/scsi/ufs/ufs-sysfs.c b/drivers/scsi/ufs/ufs-sysfs.c
index dbdf8b0..92a63ee 100644
--- a/drivers/scsi/ufs/ufs-sysfs.c
+++ b/drivers/scsi/ufs/ufs-sysfs.c
@@ -210,8 +210,10 @@ static ssize_t ufs_sysfs_read_desc_param(struct ufs_hba *hba,
 	if (param_size > 8)
 		return -EINVAL;
 
+	pm_runtime_get_sync(hba->dev);
 	ret = ufshcd_read_desc_param(hba, desc_id, desc_index,
 				param_offset, desc_buf, param_size);
+	pm_runtime_put_sync(hba->dev);
 	if (ret)
 		return -EINVAL;
 	switch (param_size) {
@@ -558,6 +560,7 @@ static ssize_t _name##_show(struct device *dev,				\
 	desc_buf = kzalloc(QUERY_DESC_MAX_SIZE, GFP_ATOMIC);		\
 	if (!desc_buf)                                                  \
 		return -ENOMEM;                                         \
+	pm_runtime_get_sync(hba->dev);					\
 	ret = ufshcd_query_descriptor_retry(hba,			\
 		UPIU_QUERY_OPCODE_READ_DESC, QUERY_DESC_IDN_DEVICE,	\
 		0, 0, desc_buf, &desc_len);				\
@@ -574,6 +577,7 @@ static ssize_t _name##_show(struct device *dev,				\
 		goto out;						\
 	ret = snprintf(buf, PAGE_SIZE, "%s\n", desc_buf);		\
 out:									\
+	pm_runtime_put_sync(hba->dev);					\
 	kfree(desc_buf);						\
 	return ret;							\
 }									\
@@ -604,9 +608,13 @@ static ssize_t _name##_show(struct device *dev,				\
 	struct device_attribute *attr, char *buf)			\
 {									\
 	bool flag;							\
+	int ret;							\
 	struct ufs_hba *hba = dev_get_drvdata(dev);			\
-	if (ufshcd_query_flag(hba, UPIU_QUERY_OPCODE_READ_FLAG,		\
-		QUERY_FLAG_IDN##_uname, &flag))				\
+	pm_runtime_get_sync(hba->dev);					\
+	ret = ufshcd_query_flag(hba, UPIU_QUERY_OPCODE_READ_FLAG,	\
+		QUERY_FLAG_IDN##_uname, &flag);				\
+	pm_runtime_put_sync(hba->dev);					\
+	if (ret)							\
 		return -EINVAL;						\
 	return sprintf(buf, "%s\n", flag ? "true" : "false");		\
 }									\
@@ -644,8 +652,12 @@ static ssize_t _name##_show(struct device *dev,				\
 {									\
 	struct ufs_hba *hba = dev_get_drvdata(dev);			\
 	u32 value;							\
-	if (ufshcd_query_attr(hba, UPIU_QUERY_OPCODE_READ_ATTR,		\
-		QUERY_ATTR_IDN##_uname, 0, 0, &value))			\
+	int ret;							\
+	pm_runtime_get_sync(hba->dev);					\
+	ret = ufshcd_query_attr(hba, UPIU_QUERY_OPCODE_READ_ATTR,	\
+		QUERY_ATTR_IDN##_uname, 0, 0, &value);			\
+	pm_runtime_put_sync(hba->dev);					\
+	if (ret)							\
 		return -EINVAL;						\
 	return sprintf(buf, "0x%08X\n", value);				\
 }									\
@@ -766,9 +778,13 @@ static ssize_t dyn_cap_needed_attribute_show(struct device *dev,
 	struct scsi_device *sdev = to_scsi_device(dev);
 	struct ufs_hba *hba = shost_priv(sdev->host);
 	u8 lun = ufshcd_scsi_to_upiu_lun(sdev->lun);
+	int ret;
 
-	if (ufshcd_query_attr(hba, UPIU_QUERY_OPCODE_READ_ATTR,
-		QUERY_ATTR_IDN_DYN_CAP_NEEDED, lun, 0, &value))
+	pm_runtime_get_sync(hba->dev);
+	ret = ufshcd_query_attr(hba, UPIU_QUERY_OPCODE_READ_ATTR,
+		QUERY_ATTR_IDN_DYN_CAP_NEEDED, lun, 0, &value);
+	pm_runtime_put_sync(hba->dev);
+	if (ret)
 		return -EINVAL;
 	return sprintf(buf, "0x%08X\n", value);
 }
diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
index cfe3803..990cb48 100644
--- a/drivers/scsi/ufs/ufs.h
+++ b/drivers/scsi/ufs/ufs.h
@@ -167,6 +167,7 @@ enum attr_idn {
 	QUERY_ATTR_IDN_FFU_STATUS		= 0x14,
 	QUERY_ATTR_IDN_PSA_STATE		= 0x15,
 	QUERY_ATTR_IDN_PSA_DATA_SIZE		= 0x16,
+	QUERY_ATTR_IDN_REF_CLK_GATING_WAIT_TIME	= 0x17,
 };
 
 /* Descriptor idn for Query requests */
@@ -534,6 +535,8 @@ struct ufs_dev_info {
 	u16 wmanufacturerid;
 	/*UFS device Product Name */
 	u8 *model;
+	u16 wspecversion;
+	u32 clk_gating_wait_us;
 };
 
 /**
diff --git a/drivers/scsi/ufs/ufs_quirks.h b/drivers/scsi/ufs/ufs_quirks.h
index d0ab147..df7a1e6 100644
--- a/drivers/scsi/ufs/ufs_quirks.h
+++ b/drivers/scsi/ufs/ufs_quirks.h
@@ -15,6 +15,7 @@
 #define UFS_VENDOR_TOSHIBA     0x198
 #define UFS_VENDOR_SAMSUNG     0x1CE
 #define UFS_VENDOR_SKHYNIX     0x1AD
+#define UFS_VENDOR_WDC         0x145
 
 /**
  * ufs_dev_fix - ufs device quirk info
diff --git a/drivers/scsi/ufs/ufshcd-pci.c b/drivers/scsi/ufs/ufshcd-pci.c
index 3b19de3..8f78a81 100644
--- a/drivers/scsi/ufs/ufshcd-pci.c
+++ b/drivers/scsi/ufs/ufshcd-pci.c
@@ -44,7 +44,7 @@ static int ufs_intel_disable_lcc(struct ufs_hba *hba)
 
 	ufshcd_dme_get(hba, attr, &lcc_enable);
 	if (lcc_enable)
-		ufshcd_dme_set(hba, attr, 0);
+		ufshcd_disable_host_tx_lcc(hba);
 
 	return 0;
 }
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 2d705694..698e8d2 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -42,6 +42,7 @@
 #include <linux/nls.h>
 #include <linux/of.h>
 #include <linux/bitfield.h>
+#include <linux/blk-pm.h>
 #include "ufshcd.h"
 #include "ufs_quirks.h"
 #include "unipro.h"
@@ -91,6 +92,9 @@
 /* default delay of autosuspend: 2000 ms */
 #define RPM_AUTOSUSPEND_DELAY_MS 2000
 
+/* Default value of wait time before gating device ref clock */
+#define UFSHCD_REF_CLK_GATING_WAIT_US 0xFF /* microsecs */
+
 #define ufshcd_toggle_vreg(_dev, _vreg, _on)				\
 	({                                                              \
 		int _ret;                                               \
@@ -168,19 +172,6 @@ enum {
 #define ufshcd_clear_eh_in_progress(h) \
 	((h)->eh_flags &= ~UFSHCD_EH_IN_PROGRESS)
 
-#define ufshcd_set_ufs_dev_active(h) \
-	((h)->curr_dev_pwr_mode = UFS_ACTIVE_PWR_MODE)
-#define ufshcd_set_ufs_dev_sleep(h) \
-	((h)->curr_dev_pwr_mode = UFS_SLEEP_PWR_MODE)
-#define ufshcd_set_ufs_dev_poweroff(h) \
-	((h)->curr_dev_pwr_mode = UFS_POWERDOWN_PWR_MODE)
-#define ufshcd_is_ufs_dev_active(h) \
-	((h)->curr_dev_pwr_mode == UFS_ACTIVE_PWR_MODE)
-#define ufshcd_is_ufs_dev_sleep(h) \
-	((h)->curr_dev_pwr_mode == UFS_SLEEP_PWR_MODE)
-#define ufshcd_is_ufs_dev_poweroff(h) \
-	((h)->curr_dev_pwr_mode == UFS_POWERDOWN_PWR_MODE)
-
 struct ufs_pm_lvl_states ufs_pm_lvl_states[] = {
 	{UFS_ACTIVE_PWR_MODE, UIC_LINK_ACTIVE_STATE},
 	{UFS_ACTIVE_PWR_MODE, UIC_LINK_HIBERN8_STATE},
@@ -532,6 +523,18 @@ static void ufshcd_print_pwr_info(struct ufs_hba *hba)
 		 hba->pwr_info.hs_rate);
 }
 
+void ufshcd_delay_us(unsigned long us, unsigned long tolerance)
+{
+	if (!us)
+		return;
+
+	if (us < 10)
+		udelay(us);
+	else
+		usleep_range(us, us + tolerance);
+}
+EXPORT_SYMBOL_GPL(ufshcd_delay_us);
+
 /*
  * ufshcd_wait_for_register - wait for register value to change
  * @hba - per-adapter interface
@@ -642,11 +645,7 @@ static inline int ufshcd_get_tr_ocs(struct ufshcd_lrb *lrbp)
  */
 static inline void ufshcd_utrl_clear(struct ufs_hba *hba, u32 pos)
 {
-	if (hba->quirks & UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR)
-		ufshcd_writel(hba, (1 << pos), REG_UTP_TRANSFER_REQ_LIST_CLEAR);
-	else
-		ufshcd_writel(hba, ~(1 << pos),
-				REG_UTP_TRANSFER_REQ_LIST_CLEAR);
+	ufshcd_writel(hba, ~(1 << pos), REG_UTP_TRANSFER_REQ_LIST_CLEAR);
 }
 
 /**
@@ -656,10 +655,7 @@ static inline void ufshcd_utrl_clear(struct ufs_hba *hba, u32 pos)
  */
 static inline void ufshcd_utmrl_clear(struct ufs_hba *hba, u32 pos)
 {
-	if (hba->quirks & UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR)
-		ufshcd_writel(hba, (1 << pos), REG_UTP_TASK_REQ_LIST_CLEAR);
-	else
-		ufshcd_writel(hba, ~(1 << pos), REG_UTP_TASK_REQ_LIST_CLEAR);
+	ufshcd_writel(hba, ~(1 << pos), REG_UTP_TASK_REQ_LIST_CLEAR);
 }
 
 /**
@@ -859,28 +855,29 @@ static bool ufshcd_is_unipro_pa_params_tuning_req(struct ufs_hba *hba)
 		return false;
 }
 
-static int ufshcd_scale_clks(struct ufs_hba *hba, bool scale_up)
+/**
+ * ufshcd_set_clk_freq - set UFS controller clock frequencies
+ * @hba: per adapter instance
+ * @scale_up: If True, set max possible frequency othewise set low frequency
+ *
+ * Returns 0 if successful
+ * Returns < 0 for any other errors
+ */
+static int ufshcd_set_clk_freq(struct ufs_hba *hba, bool scale_up)
 {
 	int ret = 0;
 	struct ufs_clk_info *clki;
 	struct list_head *head = &hba->clk_list_head;
-	ktime_t start = ktime_get();
-	bool clk_state_changed = false;
 
 	if (list_empty(head))
 		goto out;
 
-	ret = ufshcd_vops_clk_scale_notify(hba, scale_up, PRE_CHANGE);
-	if (ret)
-		return ret;
-
 	list_for_each_entry(clki, head, list) {
 		if (!IS_ERR_OR_NULL(clki->clk)) {
 			if (scale_up && clki->max_freq) {
 				if (clki->curr_freq == clki->max_freq)
 					continue;
 
-				clk_state_changed = true;
 				ret = clk_set_rate(clki->clk, clki->max_freq);
 				if (ret) {
 					dev_err(hba->dev, "%s: %s clk set rate(%dHz) failed, %d\n",
@@ -899,7 +896,6 @@ static int ufshcd_scale_clks(struct ufs_hba *hba, bool scale_up)
 				if (clki->curr_freq == clki->min_freq)
 					continue;
 
-				clk_state_changed = true;
 				ret = clk_set_rate(clki->clk, clki->min_freq);
 				if (ret) {
 					dev_err(hba->dev, "%s: %s clk set rate(%dHz) failed, %d\n",
@@ -918,11 +914,37 @@ static int ufshcd_scale_clks(struct ufs_hba *hba, bool scale_up)
 				clki->name, clk_get_rate(clki->clk));
 	}
 
+out:
+	return ret;
+}
+
+/**
+ * ufshcd_scale_clks - scale up or scale down UFS controller clocks
+ * @hba: per adapter instance
+ * @scale_up: True if scaling up and false if scaling down
+ *
+ * Returns 0 if successful
+ * Returns < 0 for any other errors
+ */
+static int ufshcd_scale_clks(struct ufs_hba *hba, bool scale_up)
+{
+	int ret = 0;
+	ktime_t start = ktime_get();
+
+	ret = ufshcd_vops_clk_scale_notify(hba, scale_up, PRE_CHANGE);
+	if (ret)
+		goto out;
+
+	ret = ufshcd_set_clk_freq(hba, scale_up);
+	if (ret)
+		goto out;
+
 	ret = ufshcd_vops_clk_scale_notify(hba, scale_up, POST_CHANGE);
+	if (ret)
+		ufshcd_set_clk_freq(hba, !scale_up);
 
 out:
-	if (clk_state_changed)
-		trace_ufshcd_profile_clk_scaling(dev_name(hba->dev),
+	trace_ufshcd_profile_clk_scaling(dev_name(hba->dev),
 			(scale_up ? "up" : "down"),
 			ktime_to_us(ktime_sub(ktime_get(), start)), ret);
 	return ret;
@@ -1056,8 +1078,7 @@ static int ufshcd_scale_gear(struct ufs_hba *hba, bool scale_up)
 	}
 
 	/* check if the power mode needs to be changed or not? */
-	ret = ufshcd_change_power_mode(hba, &new_pwr_info);
-
+	ret = ufshcd_config_pwr_mode(hba, &new_pwr_info);
 	if (ret)
 		dev_err(hba->dev, "%s: failed err %d, old gear: (tx %d rx %d), new gear: (tx %d rx %d)",
 			__func__, ret,
@@ -1110,35 +1131,32 @@ static int ufshcd_devfreq_scale(struct ufs_hba *hba, bool scale_up)
 
 	ret = ufshcd_clock_scaling_prepare(hba);
 	if (ret)
-		return ret;
+		goto out;
 
 	/* scale down the gear before scaling down clocks */
 	if (!scale_up) {
 		ret = ufshcd_scale_gear(hba, false);
 		if (ret)
-			goto out;
+			goto out_unprepare;
 	}
 
 	ret = ufshcd_scale_clks(hba, scale_up);
 	if (ret) {
 		if (!scale_up)
 			ufshcd_scale_gear(hba, true);
-		goto out;
+		goto out_unprepare;
 	}
 
 	/* scale up the gear after scaling up clocks */
 	if (scale_up) {
 		ret = ufshcd_scale_gear(hba, true);
-		if (ret) {
+		if (ret)
 			ufshcd_scale_clks(hba, false);
-			goto out;
-		}
 	}
 
-	ret = ufshcd_vops_clk_scale_notify(hba, scale_up, POST_CHANGE);
-
-out:
+out_unprepare:
 	ufshcd_clock_scaling_unprepare(hba);
+out:
 	ufshcd_release(hba);
 	return ret;
 }
@@ -1191,6 +1209,9 @@ static int ufshcd_devfreq_target(struct device *dev,
 	if (!ufshcd_is_clkscaling_supported(hba))
 		return -EINVAL;
 
+	clki = list_first_entry(&hba->clk_list_head, struct ufs_clk_info, list);
+	/* Override with the closest supported frequency */
+	*freq = (unsigned long) clk_round_rate(clki->clk, *freq);
 	spin_lock_irqsave(hba->host->host_lock, irq_flags);
 	if (ufshcd_eh_in_progress(hba)) {
 		spin_unlock_irqrestore(hba->host->host_lock, irq_flags);
@@ -1205,8 +1226,11 @@ static int ufshcd_devfreq_target(struct device *dev,
 		goto out;
 	}
 
-	clki = list_first_entry(&hba->clk_list_head, struct ufs_clk_info, list);
+	/* Decide based on the rounded-off frequency and update */
 	scale_up = (*freq == clki->max_freq) ? true : false;
+	if (!scale_up)
+		*freq = clki->min_freq;
+	/* Update the frequency */
 	if (!ufshcd_is_devfreq_scaling_required(hba, scale_up)) {
 		spin_unlock_irqrestore(hba->host->host_lock, irq_flags);
 		ret = 0;
@@ -1254,6 +1278,8 @@ static int ufshcd_devfreq_get_dev_status(struct device *dev,
 	struct ufs_hba *hba = dev_get_drvdata(dev);
 	struct ufs_clk_scaling *scaling = &hba->clk_scaling;
 	unsigned long flags;
+	struct list_head *clk_list = &hba->clk_list_head;
+	struct ufs_clk_info *clki;
 
 	if (!ufshcd_is_clkscaling_supported(hba))
 		return -EINVAL;
@@ -1264,6 +1290,13 @@ static int ufshcd_devfreq_get_dev_status(struct device *dev,
 	if (!scaling->window_start_t)
 		goto start_window;
 
+	clki = list_first_entry(clk_list, struct ufs_clk_info, list);
+	/*
+	 * If current frequency is 0, then the ondemand governor considers
+	 * there's no initial frequency set. And it always requests to set
+	 * to max. frequency.
+	 */
+	stat->current_frequency = clki->curr_freq;
 	if (scaling->is_busy_started)
 		scaling->tot_busy_t += ktime_to_us(ktime_sub(ktime_get(),
 					scaling->busy_start_t));
@@ -1292,6 +1325,17 @@ static struct devfreq_dev_profile ufs_devfreq_profile = {
 	.get_dev_status	= ufshcd_devfreq_get_dev_status,
 };
 
+#if IS_ENABLED(CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND)
+static struct devfreq_simple_ondemand_data ufs_ondemand_data = {
+	.upthreshold = 70,
+	.downdifferential = 5,
+};
+
+static void *gov_data = &ufs_ondemand_data;
+#else
+static void *gov_data; /* NULL */
+#endif
+
 static int ufshcd_devfreq_init(struct ufs_hba *hba)
 {
 	struct list_head *clk_list = &hba->clk_list_head;
@@ -1307,10 +1351,12 @@ static int ufshcd_devfreq_init(struct ufs_hba *hba)
 	dev_pm_opp_add(hba->dev, clki->min_freq, 0);
 	dev_pm_opp_add(hba->dev, clki->max_freq, 0);
 
+	ufshcd_vops_config_scaling_param(hba, &ufs_devfreq_profile,
+					 gov_data);
 	devfreq = devfreq_add_device(hba->dev,
 			&ufs_devfreq_profile,
 			DEVFREQ_GOV_SIMPLE_ONDEMAND,
-			NULL);
+			gov_data);
 	if (IS_ERR(devfreq)) {
 		ret = PTR_ERR(devfreq);
 		dev_err(hba->dev, "Unable to register with devfreq %d\n", ret);
@@ -1518,6 +1564,11 @@ int ufshcd_hold(struct ufs_hba *hba, bool async)
 		 */
 		if (ufshcd_can_hibern8_during_gating(hba) &&
 		    ufshcd_is_link_hibern8(hba)) {
+			if (async) {
+				rc = -EAGAIN;
+				hba->clk_gating.active_reqs--;
+				break;
+			}
 			spin_unlock_irqrestore(hba->host->host_lock, flags);
 			flush_work(&hba->clk_gating.ungate_work);
 			spin_lock_irqsave(hba->host->host_lock, flags);
@@ -2093,13 +2144,8 @@ static int ufshcd_map_sg(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
 		return sg_segments;
 
 	if (sg_segments) {
-		if (hba->quirks & UFSHCD_QUIRK_PRDT_BYTE_GRAN)
-			lrbp->utr_descriptor_ptr->prd_table_length =
-				cpu_to_le16((u16)(sg_segments *
-					sizeof(struct ufshcd_sg_entry)));
-		else
-			lrbp->utr_descriptor_ptr->prd_table_length =
-				cpu_to_le16((u16) (sg_segments));
+		lrbp->utr_descriptor_ptr->prd_table_length =
+			cpu_to_le16((u16)sg_segments);
 
 		prd_table = (struct ufshcd_sg_entry *)lrbp->ucd_prdt_ptr;
 
@@ -2363,6 +2409,27 @@ static inline u16 ufshcd_upiu_wlun_to_scsi_wlun(u8 upiu_wlun_id)
 	return (upiu_wlun_id & ~UFS_UPIU_WLUN_ID) | SCSI_W_LUN_BASE;
 }
 
+static void ufshcd_init_lrb(struct ufs_hba *hba, struct ufshcd_lrb *lrb, int i)
+{
+	struct utp_transfer_cmd_desc *cmd_descp = hba->ucdl_base_addr;
+	struct utp_transfer_req_desc *utrdlp = hba->utrdl_base_addr;
+	dma_addr_t cmd_desc_element_addr = hba->ucdl_dma_addr +
+		i * sizeof(struct utp_transfer_cmd_desc);
+	u16 response_offset = offsetof(struct utp_transfer_cmd_desc,
+				       response_upiu);
+	u16 prdt_offset = offsetof(struct utp_transfer_cmd_desc, prd_table);
+
+	lrb->utr_descriptor_ptr = utrdlp + i;
+	lrb->utrd_dma_addr = hba->utrdl_dma_addr +
+		i * sizeof(struct utp_transfer_req_desc);
+	lrb->ucd_req_ptr = (struct utp_upiu_req *)(cmd_descp + i);
+	lrb->ucd_req_dma_addr = cmd_desc_element_addr;
+	lrb->ucd_rsp_ptr = (struct utp_upiu_rsp *)cmd_descp[i].response_upiu;
+	lrb->ucd_rsp_dma_addr = cmd_desc_element_addr + response_offset;
+	lrb->ucd_prdt_ptr = (struct ufshcd_sg_entry *)cmd_descp[i].prd_table;
+	lrb->ucd_prdt_dma_addr = cmd_desc_element_addr + prdt_offset;
+}
+
 /**
  * ufshcd_queuecommand - main entry point for SCSI requests
  * @host: SCSI host pointer
@@ -2452,7 +2519,7 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
 
 	/* issue command to the controller */
 	spin_lock_irqsave(hba->host->host_lock, flags);
-	ufshcd_vops_setup_xfer_req(hba, tag, (lrbp->cmd ? true : false));
+	ufshcd_vops_setup_xfer_req(hba, tag, true);
 	ufshcd_send_command(hba, tag);
 out_unlock:
 	spin_unlock_irqrestore(hba->host->host_lock, flags);
@@ -2639,7 +2706,7 @@ static int ufshcd_exec_dev_cmd(struct ufs_hba *hba,
 	/* Make sure descriptors are ready before ringing the doorbell */
 	wmb();
 	spin_lock_irqsave(hba->host->host_lock, flags);
-	ufshcd_vops_setup_xfer_req(hba, tag, (lrbp->cmd ? true : false));
+	ufshcd_vops_setup_xfer_req(hba, tag, false);
 	ufshcd_send_command(hba, tag);
 	spin_unlock_irqrestore(hba->host->host_lock, flags);
 
@@ -3276,6 +3343,31 @@ static inline int ufshcd_read_unit_desc_param(struct ufs_hba *hba,
 				      param_offset, param_read_buf, param_size);
 }
 
+static int ufshcd_get_ref_clk_gating_wait(struct ufs_hba *hba)
+{
+	int err = 0;
+	u32 gating_wait = UFSHCD_REF_CLK_GATING_WAIT_US;
+
+	if (hba->dev_info.wspecversion >= 0x300) {
+		err = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_READ_ATTR,
+				QUERY_ATTR_IDN_REF_CLK_GATING_WAIT_TIME, 0, 0,
+				&gating_wait);
+		if (err)
+			dev_err(hba->dev, "Failed reading bRefClkGatingWait. err = %d, use default %uus\n",
+					 err, gating_wait);
+
+		if (gating_wait == 0) {
+			gating_wait = UFSHCD_REF_CLK_GATING_WAIT_US;
+			dev_err(hba->dev, "Undefined ref clk gating wait time, use default %uus\n",
+					 gating_wait);
+		}
+
+		hba->dev_info.clk_gating_wait_us = gating_wait;
+	}
+
+	return err;
+}
+
 /**
  * ufshcd_memory_alloc - allocate memory for host memory space data structures
  * @hba: per adapter instance
@@ -3373,7 +3465,6 @@ static int ufshcd_memory_alloc(struct ufs_hba *hba)
  */
 static void ufshcd_host_memory_configure(struct ufs_hba *hba)
 {
-	struct utp_transfer_cmd_desc *cmd_descp;
 	struct utp_transfer_req_desc *utrdlp;
 	dma_addr_t cmd_desc_dma_addr;
 	dma_addr_t cmd_desc_element_addr;
@@ -3383,7 +3474,6 @@ static void ufshcd_host_memory_configure(struct ufs_hba *hba)
 	int i;
 
 	utrdlp = hba->utrdl_base_addr;
-	cmd_descp = hba->ucdl_base_addr;
 
 	response_offset =
 		offsetof(struct utp_transfer_cmd_desc, response_upiu);
@@ -3403,36 +3493,13 @@ static void ufshcd_host_memory_configure(struct ufs_hba *hba)
 				cpu_to_le32(upper_32_bits(cmd_desc_element_addr));
 
 		/* Response upiu and prdt offset should be in double words */
-		if (hba->quirks & UFSHCD_QUIRK_PRDT_BYTE_GRAN) {
-			utrdlp[i].response_upiu_offset =
-				cpu_to_le16(response_offset);
-			utrdlp[i].prd_table_offset =
-				cpu_to_le16(prdt_offset);
-			utrdlp[i].response_upiu_length =
-				cpu_to_le16(ALIGNED_UPIU_SIZE);
-		} else {
-			utrdlp[i].response_upiu_offset =
-				cpu_to_le16((response_offset >> 2));
-			utrdlp[i].prd_table_offset =
-				cpu_to_le16((prdt_offset >> 2));
-			utrdlp[i].response_upiu_length =
-				cpu_to_le16(ALIGNED_UPIU_SIZE >> 2);
-		}
+		utrdlp[i].response_upiu_offset =
+			cpu_to_le16(response_offset >> 2);
+		utrdlp[i].prd_table_offset = cpu_to_le16(prdt_offset >> 2);
+		utrdlp[i].response_upiu_length =
+			cpu_to_le16(ALIGNED_UPIU_SIZE >> 2);
 
-		hba->lrb[i].utr_descriptor_ptr = (utrdlp + i);
-		hba->lrb[i].utrd_dma_addr = hba->utrdl_dma_addr +
-				(i * sizeof(struct utp_transfer_req_desc));
-		hba->lrb[i].ucd_req_ptr =
-			(struct utp_upiu_req *)(cmd_descp + i);
-		hba->lrb[i].ucd_req_dma_addr = cmd_desc_element_addr;
-		hba->lrb[i].ucd_rsp_ptr =
-			(struct utp_upiu_rsp *)cmd_descp[i].response_upiu;
-		hba->lrb[i].ucd_rsp_dma_addr = cmd_desc_element_addr +
-				response_offset;
-		hba->lrb[i].ucd_prdt_ptr =
-			(struct ufshcd_sg_entry *)cmd_descp[i].prd_table;
-		hba->lrb[i].ucd_prdt_dma_addr = cmd_desc_element_addr +
-				prdt_offset;
+		ufshcd_init_lrb(hba, &hba->lrb[i], i);
 	}
 }
 
@@ -3460,52 +3527,6 @@ static int ufshcd_dme_link_startup(struct ufs_hba *hba)
 			"dme-link-startup: error code %d\n", ret);
 	return ret;
 }
-/**
- * ufshcd_dme_reset - UIC command for DME_RESET
- * @hba: per adapter instance
- *
- * DME_RESET command is issued in order to reset UniPro stack.
- * This function now deal with cold reset.
- *
- * Returns 0 on success, non-zero value on failure
- */
-static int ufshcd_dme_reset(struct ufs_hba *hba)
-{
-	struct uic_command uic_cmd = {0};
-	int ret;
-
-	uic_cmd.command = UIC_CMD_DME_RESET;
-
-	ret = ufshcd_send_uic_cmd(hba, &uic_cmd);
-	if (ret)
-		dev_err(hba->dev,
-			"dme-reset: error code %d\n", ret);
-
-	return ret;
-}
-
-/**
- * ufshcd_dme_enable - UIC command for DME_ENABLE
- * @hba: per adapter instance
- *
- * DME_ENABLE command is issued in order to enable UniPro stack.
- *
- * Returns 0 on success, non-zero value on failure
- */
-static int ufshcd_dme_enable(struct ufs_hba *hba)
-{
-	struct uic_command uic_cmd = {0};
-	int ret;
-
-	uic_cmd.command = UIC_CMD_DME_ENABLE;
-
-	ret = ufshcd_send_uic_cmd(hba, &uic_cmd);
-	if (ret)
-		dev_err(hba->dev,
-			"dme-reset: error code %d\n", ret);
-
-	return ret;
-}
 
 static inline void ufshcd_add_delay_before_dme_cmd(struct ufs_hba *hba)
 {
@@ -3773,7 +3794,7 @@ static int ufshcd_uic_change_pwr_mode(struct ufs_hba *hba, u8 mode)
 	return ret;
 }
 
-static int ufshcd_link_recovery(struct ufs_hba *hba)
+int ufshcd_link_recovery(struct ufs_hba *hba)
 {
 	int ret;
 	unsigned long flags;
@@ -3800,6 +3821,7 @@ static int ufshcd_link_recovery(struct ufs_hba *hba)
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(ufshcd_link_recovery);
 
 static int __ufshcd_uic_hibern8_enter(struct ufs_hba *hba)
 {
@@ -4100,8 +4122,6 @@ int ufshcd_config_pwr_mode(struct ufs_hba *hba,
 		memcpy(&final_params, desired_pwr_mode, sizeof(final_params));
 
 	ret = ufshcd_change_power_mode(hba, &final_params);
-	if (!ret)
-		ufshcd_print_pwr_info(hba);
 
 	return ret;
 }
@@ -4224,7 +4244,7 @@ static inline void ufshcd_hba_stop(struct ufs_hba *hba, bool can_sleep)
 }
 
 /**
- * ufshcd_hba_execute_hce - initialize the controller
+ * ufshcd_hba_enable - initialize the controller
  * @hba: per adapter instance
  *
  * The controller resets itself and controller firmware initialization
@@ -4233,7 +4253,7 @@ static inline void ufshcd_hba_stop(struct ufs_hba *hba, bool can_sleep)
  *
  * Returns 0 on success, non-zero value on failure
  */
-static int ufshcd_hba_execute_hce(struct ufs_hba *hba)
+int ufshcd_hba_enable(struct ufs_hba *hba)
 {
 	int retry;
 
@@ -4259,10 +4279,10 @@ static int ufshcd_hba_execute_hce(struct ufs_hba *hba)
 	 * instruction might be read back.
 	 * This delay can be changed based on the controller.
 	 */
-	usleep_range(1000, 1100);
+	ufshcd_delay_us(hba->hba_enable_delay_us, 100);
 
 	/* wait for the host controller to complete initialization */
-	retry = 10;
+	retry = 50;
 	while (ufshcd_is_hba_active(hba)) {
 		if (retry) {
 			retry--;
@@ -4271,7 +4291,7 @@ static int ufshcd_hba_execute_hce(struct ufs_hba *hba)
 				"Controller enable failed\n");
 			return -EIO;
 		}
-		usleep_range(5000, 5100);
+		usleep_range(1000, 1100);
 	}
 
 	/* enable UIC related interrupts */
@@ -4281,37 +4301,11 @@ static int ufshcd_hba_execute_hce(struct ufs_hba *hba)
 
 	return 0;
 }
-
-int ufshcd_hba_enable(struct ufs_hba *hba)
-{
-	int ret;
-
-	if (hba->quirks & UFSHCI_QUIRK_BROKEN_HCE) {
-		ufshcd_set_link_off(hba);
-		ufshcd_vops_hce_enable_notify(hba, PRE_CHANGE);
-
-		/* enable UIC related interrupts */
-		ufshcd_enable_intr(hba, UFSHCD_UIC_MASK);
-		ret = ufshcd_dme_reset(hba);
-		if (!ret) {
-			ret = ufshcd_dme_enable(hba);
-			if (!ret)
-				ufshcd_vops_hce_enable_notify(hba, POST_CHANGE);
-			if (ret)
-				dev_err(hba->dev,
-					"Host controller enable failed with non-hce\n");
-		}
-	} else {
-		ret = ufshcd_hba_execute_hce(hba);
-	}
-
-	return ret;
-}
 EXPORT_SYMBOL_GPL(ufshcd_hba_enable);
 
 static int ufshcd_disable_tx_lcc(struct ufs_hba *hba, bool peer)
 {
-	int tx_lanes, i, err = 0;
+	int tx_lanes = 0, i, err = 0;
 
 	if (!peer)
 		ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDTXDATALANES),
@@ -4737,8 +4731,15 @@ ufshcd_transfer_rsp_status(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
 			 * UFS device needs urgent BKOPs.
 			 */
 			if (!hba->pm_op_in_progress &&
-			    ufshcd_is_exception_event(lrbp->ucd_rsp_ptr))
-				schedule_work(&hba->eeh_work);
+			    ufshcd_is_exception_event(lrbp->ucd_rsp_ptr) &&
+			    schedule_work(&hba->eeh_work)) {
+				/*
+				 * Prevent suspend once eeh_work is scheduled
+				 * to avoid deadlock between ufshcd_suspend
+				 * and exception event handler.
+				 */
+				pm_runtime_get_noresume(hba->dev);
+			}
 			break;
 		case UPIU_TRANSACTION_REJECT_UPIU:
 			/* TODO: handle Reject UPIU Response */
@@ -4876,8 +4877,7 @@ static irqreturn_t ufshcd_transfer_req_compl(struct ufs_hba *hba)
 	 * false interrupt if device completes another request after resetting
 	 * aggregation and before reading the DB.
 	 */
-	if (ufshcd_is_intr_aggr_allowed(hba) &&
-	    !(hba->quirks & UFSHCI_QUIRK_SKIP_RESET_INTR_AGGR))
+	if (ufshcd_is_intr_aggr_allowed(hba))
 		ufshcd_reset_intr_aggr(hba);
 
 	tr_doorbell = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL);
@@ -5191,7 +5191,14 @@ static void ufshcd_exception_event_handler(struct work_struct *work)
 
 out:
 	ufshcd_scsi_unblock_requests(hba);
-	pm_runtime_put_sync(hba->dev);
+	/*
+	 * pm_runtime_get_noresume is called while scheduling
+	 * eeh_work to avoid suspend racing with exception work.
+	 * Hence decrement usage counter using pm_runtime_put_noidle
+	 * to allow suspend on completion of exception event handler.
+	 */
+	pm_runtime_put_noidle(hba->dev);
+	pm_runtime_put(hba->dev);
 	return;
 }
 
@@ -5486,7 +5493,8 @@ static irqreturn_t ufshcd_update_uic_error(struct ufs_hba *hba)
 static bool ufshcd_is_auto_hibern8_error(struct ufs_hba *hba,
 					 u32 intr_mask)
 {
-	if (!ufshcd_is_auto_hibern8_supported(hba))
+	if (!ufshcd_is_auto_hibern8_supported(hba) ||
+	    !ufshcd_is_auto_hibern8_enabled(hba))
 		return false;
 
 	if (!(intr_mask & UFSHCD_UIC_HIBERN8_MASK))
@@ -6299,7 +6307,7 @@ static int ufshcd_host_reset_and_restore(struct ufs_hba *hba)
 	spin_unlock_irqrestore(hba->host->host_lock, flags);
 
 	/* scale up clocks to max frequency before full reinitialization */
-	ufshcd_scale_clks(hba, true);
+	ufshcd_set_clk_freq(hba, true);
 
 	err = ufshcd_hba_enable(hba);
 	if (err)
@@ -6482,11 +6490,12 @@ static u32 ufshcd_find_max_sup_active_icc_level(struct ufs_hba *hba,
 	return icc_level;
 }
 
-static void ufshcd_init_icc_levels(struct ufs_hba *hba)
+static void ufshcd_set_active_icc_lvl(struct ufs_hba *hba)
 {
 	int ret;
 	int buff_len = hba->desc_size.pwr_desc;
 	u8 *desc_buf;
+	u32 icc_level;
 
 	desc_buf = kmalloc(buff_len, GFP_KERNEL);
 	if (!desc_buf)
@@ -6501,25 +6510,32 @@ static void ufshcd_init_icc_levels(struct ufs_hba *hba)
 		goto out;
 	}
 
-	hba->init_prefetch_data.icc_level =
-			ufshcd_find_max_sup_active_icc_level(hba,
-			desc_buf, buff_len);
-	dev_dbg(hba->dev, "%s: setting icc_level 0x%x",
-			__func__, hba->init_prefetch_data.icc_level);
+	icc_level = ufshcd_find_max_sup_active_icc_level(hba, desc_buf,
+							 buff_len);
+	dev_dbg(hba->dev, "%s: setting icc_level 0x%x", __func__, icc_level);
 
 	ret = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_WRITE_ATTR,
-		QUERY_ATTR_IDN_ACTIVE_ICC_LVL, 0, 0,
-		&hba->init_prefetch_data.icc_level);
+		QUERY_ATTR_IDN_ACTIVE_ICC_LVL, 0, 0, &icc_level);
 
 	if (ret)
 		dev_err(hba->dev,
 			"%s: Failed configuring bActiveICCLevel = %d ret = %d",
-			__func__, hba->init_prefetch_data.icc_level , ret);
+			__func__, icc_level, ret);
 
 out:
 	kfree(desc_buf);
 }
 
+static inline void ufshcd_blk_pm_runtime_init(struct scsi_device *sdev)
+{
+	scsi_autopm_get_device(sdev);
+	blk_pm_runtime_init(sdev->request_queue, &sdev->sdev_gendev);
+	if (sdev->rpm_autosuspend)
+		pm_runtime_set_autosuspend_delay(&sdev->sdev_gendev,
+						 RPM_AUTOSUSPEND_DELAY_MS);
+	scsi_autopm_put_device(sdev);
+}
+
 /**
  * ufshcd_scsi_add_wlus - Adds required W-LUs
  * @hba: per-adapter instance
@@ -6559,6 +6575,7 @@ static int ufshcd_scsi_add_wlus(struct ufs_hba *hba)
 		hba->sdev_ufs_device = NULL;
 		goto out;
 	}
+	ufshcd_blk_pm_runtime_init(hba->sdev_ufs_device);
 	scsi_device_put(hba->sdev_ufs_device);
 
 	sdev_rpmb = __scsi_add_device(hba->host, 0, 0,
@@ -6567,14 +6584,17 @@ static int ufshcd_scsi_add_wlus(struct ufs_hba *hba)
 		ret = PTR_ERR(sdev_rpmb);
 		goto remove_sdev_ufs_device;
 	}
+	ufshcd_blk_pm_runtime_init(sdev_rpmb);
 	scsi_device_put(sdev_rpmb);
 
 	sdev_boot = __scsi_add_device(hba->host, 0, 0,
 		ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_BOOT_WLUN), NULL);
-	if (IS_ERR(sdev_boot))
+	if (IS_ERR(sdev_boot)) {
 		dev_err(hba->dev, "%s: BOOT WLUN not found\n", __func__);
-	else
+	} else {
+		ufshcd_blk_pm_runtime_init(sdev_boot);
 		scsi_device_put(sdev_boot);
+	}
 	goto out;
 
 remove_sdev_ufs_device:
@@ -6614,6 +6634,10 @@ static int ufs_get_device_desc(struct ufs_hba *hba)
 	dev_info->wmanufacturerid = desc_buf[DEVICE_DESC_PARAM_MANF_ID] << 8 |
 				     desc_buf[DEVICE_DESC_PARAM_MANF_ID + 1];
 
+	/* getting Specification Version in big endian format */
+	dev_info->wspecversion = desc_buf[DEVICE_DESC_PARAM_SPEC_VER] << 8 |
+				      desc_buf[DEVICE_DESC_PARAM_SPEC_VER + 1];
+
 	model_index = desc_buf[DEVICE_DESC_PARAM_PRDCT_NAME];
 	err = ufshcd_read_string_desc(hba, model_index,
 				      &dev_info->model, SD_ASCII_STD);
@@ -6811,14 +6835,14 @@ static void ufshcd_tune_unipro_params(struct ufs_hba *hba)
 		ufshcd_tune_pa_hibern8time(hba);
 	}
 
+	ufshcd_vops_apply_dev_quirks(hba);
+
 	if (hba->dev_quirks & UFS_DEVICE_QUIRK_PA_TACTIVATE)
 		/* set 1ms timeout for PA_TACTIVATE */
 		ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TACTIVATE), 10);
 
 	if (hba->dev_quirks & UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE)
 		ufshcd_quirk_tune_host_pa_tactivate(hba);
-
-	ufshcd_vops_apply_dev_quirks(hba);
 }
 
 static void ufshcd_clear_dbg_ufs_stats(struct ufs_hba *hba)
@@ -6991,6 +7015,8 @@ static int ufshcd_device_params_init(struct ufs_hba *hba)
 		goto out;
 	}
 
+	ufshcd_get_ref_clk_gating_wait(hba);
+
 	ufs_fixup_device_setup(hba);
 
 	if (!ufshcd_query_flag_retry(hba, UPIU_QUERY_OPCODE_READ_FLAG,
@@ -7014,8 +7040,6 @@ static int ufshcd_add_lus(struct ufs_hba *hba)
 {
 	int ret;
 
-	ufshcd_init_icc_levels(hba);
-
 	/* Add required well known logical units to scsi mid layer */
 	ret = ufshcd_scsi_add_wlus(hba);
 	if (ret)
@@ -7111,8 +7135,17 @@ static int ufshcd_probe_hba(struct ufs_hba *hba, bool async)
 					__func__, ret);
 			goto out;
 		}
+		ufshcd_print_pwr_info(hba);
 	}
 
+	/*
+	 * bActiveICCLevel is volatile for UFS device (as per latest v2.1 spec)
+	 * and for removable UFS card as well, hence always set the parameter.
+	 * Note: Error handler may issue the device reset hence resetting
+	 * bActiveICCLevel as well so it is always safe to set this here.
+	 */
+	ufshcd_set_active_icc_lvl(hba);
+
 	/* set the state as operational after switching to desired gear */
 	hba->ufshcd_state = UFSHCD_STATE_OPERATIONAL;
 
@@ -7241,6 +7274,11 @@ static int ufshcd_config_vreg(struct device *dev,
 	name = vreg->name;
 
 	if (regulator_count_voltages(reg) > 0) {
+		uA_load = on ? vreg->max_uA : 0;
+		ret = ufshcd_config_vreg_load(dev, vreg, uA_load);
+		if (ret)
+			goto out;
+
 		if (vreg->min_uV && vreg->max_uV) {
 			min_uV = on ? vreg->min_uV : 0;
 			ret = regulator_set_voltage(reg, min_uV, vreg->max_uV);
@@ -7251,11 +7289,6 @@ static int ufshcd_config_vreg(struct device *dev,
 				goto out;
 			}
 		}
-
-		uA_load = on ? vreg->max_uA : 0;
-		ret = ufshcd_config_vreg_load(dev, vreg, uA_load);
-		if (ret)
-			goto out;
 	}
 out:
 	return ret;
@@ -7395,16 +7428,9 @@ static int __ufshcd_setup_clocks(struct ufs_hba *hba, bool on,
 	if (list_empty(head))
 		goto out;
 
-	/*
-	 * vendor specific setup_clocks ops may depend on clocks managed by
-	 * this standard driver hence call the vendor specific setup_clocks
-	 * before disabling the clocks managed here.
-	 */
-	if (!on) {
-		ret = ufshcd_vops_setup_clocks(hba, on, PRE_CHANGE);
-		if (ret)
-			return ret;
-	}
+	ret = ufshcd_vops_setup_clocks(hba, on, PRE_CHANGE);
+	if (ret)
+		return ret;
 
 	list_for_each_entry(clki, head, list) {
 		if (!IS_ERR_OR_NULL(clki->clk)) {
@@ -7428,16 +7454,9 @@ static int __ufshcd_setup_clocks(struct ufs_hba *hba, bool on,
 		}
 	}
 
-	/*
-	 * vendor specific setup_clocks ops may depend on clocks managed by
-	 * this standard driver hence call the vendor specific setup_clocks
-	 * after enabling the clocks managed here.
-	 */
-	if (on) {
-		ret = ufshcd_vops_setup_clocks(hba, on, POST_CHANGE);
-		if (ret)
-			return ret;
-	}
+	ret = ufshcd_vops_setup_clocks(hba, on, POST_CHANGE);
+	if (ret)
+		return ret;
 
 out:
 	if (ret) {
@@ -7931,6 +7950,7 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 			goto enable_gating;
 	}
 
+	flush_work(&hba->eeh_work);
 	ret = ufshcd_link_state_transition(hba, req_link_state, 1);
 	if (ret)
 		goto set_dev_active;
@@ -8402,6 +8422,7 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
 
 	hba->mmio_base = mmio_base;
 	hba->irq = irq;
+	hba->hba_enable_delay_us = 1000;
 
 	err = ufshcd_hba_init(hba);
 	if (err)
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 2ae6c7c..6ffc08a 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -55,6 +55,8 @@
 #include <linux/clk.h>
 #include <linux/completion.h>
 #include <linux/regulator/consumer.h>
+#include <linux/bitfield.h>
+#include <linux/devfreq.h>
 #include "unipro.h"
 
 #include <asm/irq.h>
@@ -128,6 +130,19 @@ enum uic_link_state {
 #define ufshcd_set_link_hibern8(hba) ((hba)->uic_link_state = \
 				    UIC_LINK_HIBERN8_STATE)
 
+#define ufshcd_set_ufs_dev_active(h) \
+	((h)->curr_dev_pwr_mode = UFS_ACTIVE_PWR_MODE)
+#define ufshcd_set_ufs_dev_sleep(h) \
+	((h)->curr_dev_pwr_mode = UFS_SLEEP_PWR_MODE)
+#define ufshcd_set_ufs_dev_poweroff(h) \
+	((h)->curr_dev_pwr_mode = UFS_POWERDOWN_PWR_MODE)
+#define ufshcd_is_ufs_dev_active(h) \
+	((h)->curr_dev_pwr_mode == UFS_ACTIVE_PWR_MODE)
+#define ufshcd_is_ufs_dev_sleep(h) \
+	((h)->curr_dev_pwr_mode == UFS_SLEEP_PWR_MODE)
+#define ufshcd_is_ufs_dev_poweroff(h) \
+	((h)->curr_dev_pwr_mode == UFS_POWERDOWN_PWR_MODE)
+
 /*
  * UFS Power management levels.
  * Each level is in increasing order of power savings.
@@ -326,6 +341,9 @@ struct ufs_hba_variant_ops {
 	void	(*dbg_register_dump)(struct ufs_hba *hba);
 	int	(*phy_initialization)(struct ufs_hba *);
 	void	(*device_reset)(struct ufs_hba *hba);
+	void	(*config_scaling_param)(struct ufs_hba *hba,
+					struct devfreq_dev_profile *profile,
+					void *data);
 };
 
 /* clock gating state  */
@@ -403,15 +421,6 @@ struct ufs_clk_scaling {
 	bool is_suspended;
 };
 
-/**
- * struct ufs_init_prefetch - contains data that is pre-fetched once during
- * initialization
- * @icc_level: icc level which was read during initialization
- */
-struct ufs_init_prefetch {
-	u32 icc_level;
-};
-
 #define UFS_ERR_REG_HIST_LENGTH 8
 /**
  * struct ufs_err_reg_hist - keeps history of errors
@@ -469,6 +478,85 @@ struct ufs_stats {
 	struct ufs_err_reg_hist task_abort;
 };
 
+enum ufshcd_quirks {
+	/* Interrupt aggregation support is broken */
+	UFSHCD_QUIRK_BROKEN_INTR_AGGR			= 1 << 0,
+
+	/*
+	 * delay before each dme command is required as the unipro
+	 * layer has shown instabilities
+	 */
+	UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS		= 1 << 1,
+
+	/*
+	 * If UFS host controller is having issue in processing LCC (Line
+	 * Control Command) coming from device then enable this quirk.
+	 * When this quirk is enabled, host controller driver should disable
+	 * the LCC transmission on UFS device (by clearing TX_LCC_ENABLE
+	 * attribute of device to 0).
+	 */
+	UFSHCD_QUIRK_BROKEN_LCC				= 1 << 2,
+
+	/*
+	 * The attribute PA_RXHSUNTERMCAP specifies whether or not the
+	 * inbound Link supports unterminated line in HS mode. Setting this
+	 * attribute to 1 fixes moving to HS gear.
+	 */
+	UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP		= 1 << 3,
+
+	/*
+	 * This quirk needs to be enabled if the host controller only allows
+	 * accessing the peer dme attributes in AUTO mode (FAST AUTO or
+	 * SLOW AUTO).
+	 */
+	UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE		= 1 << 4,
+
+	/*
+	 * This quirk needs to be enabled if the host controller doesn't
+	 * advertise the correct version in UFS_VER register. If this quirk
+	 * is enabled, standard UFS host driver will call the vendor specific
+	 * ops (get_ufs_hci_version) to get the correct version.
+	 */
+	UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION		= 1 << 5,
+};
+
+enum ufshcd_caps {
+	/* Allow dynamic clk gating */
+	UFSHCD_CAP_CLK_GATING				= 1 << 0,
+
+	/* Allow hiberb8 with clk gating */
+	UFSHCD_CAP_HIBERN8_WITH_CLK_GATING		= 1 << 1,
+
+	/* Allow dynamic clk scaling */
+	UFSHCD_CAP_CLK_SCALING				= 1 << 2,
+
+	/* Allow auto bkops to enabled during runtime suspend */
+	UFSHCD_CAP_AUTO_BKOPS_SUSPEND			= 1 << 3,
+
+	/*
+	 * This capability allows host controller driver to use the UFS HCI's
+	 * interrupt aggregation capability.
+	 * CAUTION: Enabling this might reduce overall UFS throughput.
+	 */
+	UFSHCD_CAP_INTR_AGGR				= 1 << 4,
+
+	/*
+	 * This capability allows the device auto-bkops to be always enabled
+	 * except during suspend (both runtime and suspend).
+	 * Enabling this capability means that device will always be allowed
+	 * to do background operation when it's active but it might degrade
+	 * the performance of ongoing read/write operations.
+	 */
+	UFSHCD_CAP_KEEP_AUTO_BKOPS_ENABLED_EXCEPT_SUSPEND = 1 << 5,
+
+	/*
+	 * This capability allows host controller driver to automatically
+	 * enable runtime power management by itself instead of waiting
+	 * for userspace to control the power management.
+	 */
+	UFSHCD_CAP_RPM_AUTOSUSPEND			= 1 << 6,
+};
+
 /**
  * struct ufs_hba - per adapter private structure
  * @mmio_base: UFSHCI base register address
@@ -501,7 +589,6 @@ struct ufs_stats {
  * @intr_mask: Interrupt Mask Bits
  * @ee_ctrl_mask: Exception event control mask
  * @is_powered: flag to check if HBA is powered
- * @init_prefetch_data: data pre-fetched during initialization
  * @eh_work: Worker to handle UFS errors that require s/w attention
  * @eeh_work: Worker to handle exception events
  * @errors: HBA errors
@@ -572,68 +659,6 @@ struct ufs_hba {
 	bool is_irq_enabled;
 	enum ufs_ref_clk_freq dev_ref_clk_freq;
 
-	/* Interrupt aggregation support is broken */
-	#define UFSHCD_QUIRK_BROKEN_INTR_AGGR			0x1
-
-	/*
-	 * delay before each dme command is required as the unipro
-	 * layer has shown instabilities
-	 */
-	#define UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS		0x2
-
-	/*
-	 * If UFS host controller is having issue in processing LCC (Line
-	 * Control Command) coming from device then enable this quirk.
-	 * When this quirk is enabled, host controller driver should disable
-	 * the LCC transmission on UFS device (by clearing TX_LCC_ENABLE
-	 * attribute of device to 0).
-	 */
-	#define UFSHCD_QUIRK_BROKEN_LCC				0x4
-
-	/*
-	 * The attribute PA_RXHSUNTERMCAP specifies whether or not the
-	 * inbound Link supports unterminated line in HS mode. Setting this
-	 * attribute to 1 fixes moving to HS gear.
-	 */
-	#define UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP		0x8
-
-	/*
-	 * This quirk needs to be enabled if the host contoller only allows
-	 * accessing the peer dme attributes in AUTO mode (FAST AUTO or
-	 * SLOW AUTO).
-	 */
-	#define UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE		0x10
-
-	/*
-	 * This quirk needs to be enabled if the host contoller doesn't
-	 * advertise the correct version in UFS_VER register. If this quirk
-	 * is enabled, standard UFS host driver will call the vendor specific
-	 * ops (get_ufs_hci_version) to get the correct version.
-	 */
-	#define UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION		0x20
-
-	/*
-	 * This quirk needs to be enabled if the host contoller regards
-	 * resolution of the values of PRDTO and PRDTL in UTRD as byte.
-	 */
-	#define UFSHCD_QUIRK_PRDT_BYTE_GRAN			0x80
-
-	/*
-	 * Clear handling for transfer/task request list is just opposite.
-	 */
-	#define UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR		0x100
-
-	/*
-	 * This quirk needs to be enabled if host controller doesn't allow
-	 * that the interrupt aggregation timer and counter are reset by s/w.
-	 */
-	#define UFSHCI_QUIRK_SKIP_RESET_INTR_AGGR		0x200
-
-	/*
-	 * This quirks needs to be enabled if host controller cannot be
-	 * enabled via HCE register.
-	 */
-	#define UFSHCI_QUIRK_BROKEN_HCE				0x400
 	unsigned int quirks;	/* Deviations from standard UFSHCI spec. */
 
 	/* Device deviations from standard UFS device spec. */
@@ -650,8 +675,8 @@ struct ufs_hba {
 	u32 eh_flags;
 	u32 intr_mask;
 	u16 ee_ctrl_mask;
+	u16 hba_enable_delay_us;
 	bool is_powered;
-	struct ufs_init_prefetch init_prefetch_data;
 
 	/* Work Queues */
 	struct work_struct eh_work;
@@ -688,34 +713,6 @@ struct ufs_hba {
 	struct ufs_clk_gating clk_gating;
 	/* Control to enable/disable host capabilities */
 	u32 caps;
-	/* Allow dynamic clk gating */
-#define UFSHCD_CAP_CLK_GATING	(1 << 0)
-	/* Allow hiberb8 with clk gating */
-#define UFSHCD_CAP_HIBERN8_WITH_CLK_GATING (1 << 1)
-	/* Allow dynamic clk scaling */
-#define UFSHCD_CAP_CLK_SCALING	(1 << 2)
-	/* Allow auto bkops to enabled during runtime suspend */
-#define UFSHCD_CAP_AUTO_BKOPS_SUSPEND (1 << 3)
-	/*
-	 * This capability allows host controller driver to use the UFS HCI's
-	 * interrupt aggregation capability.
-	 * CAUTION: Enabling this might reduce overall UFS throughput.
-	 */
-#define UFSHCD_CAP_INTR_AGGR (1 << 4)
-	/*
-	 * This capability allows the device auto-bkops to be always enabled
-	 * except during suspend (both runtime and suspend).
-	 * Enabling this capability means that device will always be allowed
-	 * to do background operation when it's active but it might degrade
-	 * the performance of ongoing read/write operations.
-	 */
-#define UFSHCD_CAP_KEEP_AUTO_BKOPS_ENABLED_EXCEPT_SUSPEND (1 << 5)
-	/*
-	 * This capability allows host controller driver to automatically
-	 * enable runtime power management by itself instead of waiting
-	 * for userspace to control the power management.
-	 */
-#define UFSHCD_CAP_RPM_AUTOSUSPEND (1 << 6)
 
 	struct devfreq *devfreq;
 	struct ufs_clk_scaling clk_scaling;
@@ -773,6 +770,11 @@ static inline bool ufshcd_is_auto_hibern8_supported(struct ufs_hba *hba)
 	return (hba->capabilities & MASK_AUTO_HIBERN8_SUPPORT);
 }
 
+static inline bool ufshcd_is_auto_hibern8_enabled(struct ufs_hba *hba)
+{
+	return FIELD_GET(UFSHCI_AHIBERN8_TIMER_MASK, hba->ahit) ? true : false;
+}
+
 #define ufshcd_writel(hba, val, reg)	\
 	writel((val), (hba)->mmio_base + (reg))
 #define ufshcd_readl(hba, reg)	\
@@ -799,9 +801,11 @@ int ufshcd_alloc_host(struct device *, struct ufs_hba **);
 void ufshcd_dealloc_host(struct ufs_hba *);
 int ufshcd_hba_enable(struct ufs_hba *hba);
 int ufshcd_init(struct ufs_hba * , void __iomem * , unsigned int);
+int ufshcd_link_recovery(struct ufs_hba *hba);
 int ufshcd_make_hba_operational(struct ufs_hba *hba);
 void ufshcd_remove(struct ufs_hba *);
 int ufshcd_uic_hibern8_exit(struct ufs_hba *hba);
+void ufshcd_delay_us(unsigned long us, unsigned long tolerance);
 int ufshcd_wait_for_register(struct ufs_hba *hba, u32 reg, u32 mask,
 				u32 val, unsigned long interval_us,
 				unsigned long timeout_ms, bool can_sleep);
@@ -908,6 +912,11 @@ static inline bool ufshcd_is_hs_mode(struct ufs_pa_layer_attr *pwr_info)
 		pwr_info->pwr_tx == FASTAUTO_MODE);
 }
 
+static inline int ufshcd_disable_host_tx_lcc(struct ufs_hba *hba)
+{
+	return ufshcd_dme_set(hba, UIC_ARG_MIB(PA_LOCAL_TX_LCC_ENABLE), 0);
+}
+
 /* Expose Query-Request API */
 int ufshcd_query_descriptor_retry(struct ufs_hba *hba,
 				  enum query_opcode opcode,
@@ -1088,10 +1097,19 @@ static inline void ufshcd_vops_device_reset(struct ufs_hba *hba)
 {
 	if (hba->vops && hba->vops->device_reset) {
 		hba->vops->device_reset(hba);
+		ufshcd_set_ufs_dev_active(hba);
 		ufshcd_update_reg_hist(&hba->ufs_stats.dev_reset, 0);
 	}
 }
 
+static inline void ufshcd_vops_config_scaling_param(struct ufs_hba *hba,
+						    struct devfreq_dev_profile
+						    *profile, void *data)
+{
+	if (hba->vops && hba->vops->config_scaling_param)
+		hba->vops->config_scaling_param(hba, profile, data);
+}
+
 extern struct ufs_pm_lvl_states ufs_pm_lvl_states[];
 
 /*
diff --git a/drivers/scsi/ufs/unipro.h b/drivers/scsi/ufs/unipro.h
index 3dc4d8b..766d551 100644
--- a/drivers/scsi/ufs/unipro.h
+++ b/drivers/scsi/ufs/unipro.h
@@ -146,6 +146,12 @@
 #define PA_SLEEPNOCONFIGTIME	0x15A2
 #define PA_STALLNOCONFIGTIME	0x15A3
 #define PA_SAVECONFIGTIME	0x15A4
+#define PA_TXHSADAPTTYPE       0x15D4
+
+/* Adpat type for PA_TXHSADAPTTYPE attribute */
+#define PA_REFRESH_ADAPT       0x00
+#define PA_INITIAL_ADAPT       0x01
+#define PA_NO_ADAPT            0x03
 
 #define PA_TACTIVATE_TIME_UNIT_US	10
 #define PA_HIBERN8_TIME_UNIT_US		100
@@ -203,6 +209,7 @@ enum ufs_hs_gear_tag {
 	UFS_HS_G1,		/* HS Gear 1 (default for reset) */
 	UFS_HS_G2,		/* HS Gear 2 */
 	UFS_HS_G3,		/* HS Gear 3 */
+	UFS_HS_G4,		/* HS Gear 4 */
 };
 
 enum ufs_unipro_ver {
diff --git a/drivers/scsi/virtio_scsi.c b/drivers/scsi/virtio_scsi.c
index bfec84a..0e0910c5 100644
--- a/drivers/scsi/virtio_scsi.c
+++ b/drivers/scsi/virtio_scsi.c
@@ -742,7 +742,6 @@ static struct scsi_host_template virtscsi_host_template = {
 	.dma_boundary = UINT_MAX,
 	.map_queues = virtscsi_map_queues,
 	.track_queue_depth = 1,
-	.force_blk_mq = 1,
 };
 
 #define virtscsi_config_get(vdev, fld) \
diff --git a/drivers/scsi/zorro_esp.c b/drivers/scsi/zorro_esp.c
index bdd82e4..c6727bc 100644
--- a/drivers/scsi/zorro_esp.c
+++ b/drivers/scsi/zorro_esp.c
@@ -801,8 +801,7 @@ static int zorro_esp_probe(struct zorro_dev *z,
 	/* additional setup required for Fastlane */
 	if (zep->zorro3 && ent->driver_data == ZORRO_BLZ1230II) {
 		/* map full address space up to ESP base for DMA */
-		zep->board_base = ioremap(board,
-						FASTLANE_ESP_ADDR-1);
+		zep->board_base = ioremap(board, FASTLANE_ESP_ADDR - 1);
 		if (!zep->board_base) {
 			pr_err("Cannot allocate board address space\n");
 			err = -ENOMEM;
@@ -843,7 +842,7 @@ static int zorro_esp_probe(struct zorro_dev *z,
 		 * dma_registers size if adding any more
 		 */
 		esp->dma_regs = ioremap(dmaaddr,
-				sizeof(struct fastlane_dma_registers));
+					sizeof(struct fastlane_dma_registers));
 	} else
 		/* ZorroII address space remapped nocache by early startup */
 		esp->dma_regs = ZTWO_VADDR(dmaaddr);
diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
index 1778f8c..425ab6f 100644
--- a/drivers/soc/Kconfig
+++ b/drivers/soc/Kconfig
@@ -22,5 +22,6 @@
 source "drivers/soc/versatile/Kconfig"
 source "drivers/soc/xilinx/Kconfig"
 source "drivers/soc/zte/Kconfig"
+source "drivers/soc/kendryte/Kconfig"
 
 endmenu
diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
index 8b49d78..36452be 100644
--- a/drivers/soc/Makefile
+++ b/drivers/soc/Makefile
@@ -11,7 +11,7 @@
 obj-$(CONFIG_MACH_DOVE)		+= dove/
 obj-y				+= fsl/
 obj-$(CONFIG_ARCH_GEMINI)	+= gemini/
-obj-$(CONFIG_ARCH_MXC)		+= imx/
+obj-y				+= imx/
 obj-$(CONFIG_ARCH_IXP4XX)	+= ixp4xx/
 obj-$(CONFIG_SOC_XWAY)		+= lantiq/
 obj-y				+= mediatek/
@@ -28,3 +28,4 @@
 obj-$(CONFIG_PLAT_VERSATILE)	+= versatile/
 obj-y				+= xilinx/
 obj-$(CONFIG_ARCH_ZX)		+= zte/
+obj-$(CONFIG_SOC_KENDRYTE)	+= kendryte/
diff --git a/drivers/soc/amlogic/Kconfig b/drivers/soc/amlogic/Kconfig
index bc2c912..321c5e2 100644
--- a/drivers/soc/amlogic/Kconfig
+++ b/drivers/soc/amlogic/Kconfig
@@ -48,6 +48,19 @@
 	  Say yes to expose Amlogic Meson Everything-Else Power Domains as
 	  Generic Power Domains.
 
+config MESON_SECURE_PM_DOMAINS
+	bool "Amlogic Meson Secure Power Domains driver"
+	depends on (ARCH_MESON || COMPILE_TEST) && MESON_SM
+	depends on PM && OF
+	depends on HAVE_ARM_SMCCC
+	default ARCH_MESON
+	select PM_GENERIC_DOMAINS
+	select PM_GENERIC_DOMAINS_OF
+	help
+	  Support for the power controller on Amlogic A1/C1 series.
+	  Say yes to expose Amlogic Meson Secure Power Domains as Generic
+	  Power Domains.
+
 config MESON_MX_SOCINFO
 	bool "Amlogic Meson MX SoC Information driver"
 	depends on ARCH_MESON || COMPILE_TEST
diff --git a/drivers/soc/amlogic/Makefile b/drivers/soc/amlogic/Makefile
index de79d044..7b8c5d3 100644
--- a/drivers/soc/amlogic/Makefile
+++ b/drivers/soc/amlogic/Makefile
@@ -5,3 +5,4 @@
 obj-$(CONFIG_MESON_GX_PM_DOMAINS) += meson-gx-pwrc-vpu.o
 obj-$(CONFIG_MESON_MX_SOCINFO) += meson-mx-socinfo.o
 obj-$(CONFIG_MESON_EE_PM_DOMAINS) += meson-ee-pwrc.o
+obj-$(CONFIG_MESON_SECURE_PM_DOMAINS) += meson-secure-pwrc.o
diff --git a/drivers/soc/amlogic/meson-secure-pwrc.c b/drivers/soc/amlogic/meson-secure-pwrc.c
new file mode 100644
index 0000000..5fb29a4
--- /dev/null
+++ b/drivers/soc/amlogic/meson-secure-pwrc.c
@@ -0,0 +1,204 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Amlogic, Inc.
+ * Author: Jianxin Pan <jianxin.pan@amlogic.com>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/io.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <dt-bindings/power/meson-a1-power.h>
+#include <linux/arm-smccc.h>
+#include <linux/firmware/meson/meson_sm.h>
+
+#define PWRC_ON		1
+#define PWRC_OFF	0
+
+struct meson_secure_pwrc_domain {
+	struct generic_pm_domain base;
+	unsigned int index;
+	struct meson_secure_pwrc *pwrc;
+};
+
+struct meson_secure_pwrc {
+	struct meson_secure_pwrc_domain *domains;
+	struct genpd_onecell_data xlate;
+	struct meson_sm_firmware *fw;
+};
+
+struct meson_secure_pwrc_domain_desc {
+	unsigned int index;
+	unsigned int flags;
+	char *name;
+	bool (*is_off)(struct meson_secure_pwrc_domain *pwrc_domain);
+};
+
+struct meson_secure_pwrc_domain_data {
+	unsigned int count;
+	struct meson_secure_pwrc_domain_desc *domains;
+};
+
+static bool pwrc_secure_is_off(struct meson_secure_pwrc_domain *pwrc_domain)
+{
+	int is_off = 1;
+
+	if (meson_sm_call(pwrc_domain->pwrc->fw, SM_A1_PWRC_GET, &is_off,
+			  pwrc_domain->index, 0, 0, 0, 0) < 0)
+		pr_err("failed to get power domain status\n");
+
+	return is_off;
+}
+
+static int meson_secure_pwrc_off(struct generic_pm_domain *domain)
+{
+	int ret = 0;
+	struct meson_secure_pwrc_domain *pwrc_domain =
+		container_of(domain, struct meson_secure_pwrc_domain, base);
+
+	if (meson_sm_call(pwrc_domain->pwrc->fw, SM_A1_PWRC_SET, NULL,
+			  pwrc_domain->index, PWRC_OFF, 0, 0, 0) < 0) {
+		pr_err("failed to set power domain off\n");
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static int meson_secure_pwrc_on(struct generic_pm_domain *domain)
+{
+	int ret = 0;
+	struct meson_secure_pwrc_domain *pwrc_domain =
+		container_of(domain, struct meson_secure_pwrc_domain, base);
+
+	if (meson_sm_call(pwrc_domain->pwrc->fw, SM_A1_PWRC_SET, NULL,
+			  pwrc_domain->index, PWRC_ON, 0, 0, 0) < 0) {
+		pr_err("failed to set power domain on\n");
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+#define SEC_PD(__name, __flag)			\
+[PWRC_##__name##_ID] =				\
+{						\
+	.name = #__name,			\
+	.index = PWRC_##__name##_ID,		\
+	.is_off = pwrc_secure_is_off,	\
+	.flags = __flag,			\
+}
+
+static struct meson_secure_pwrc_domain_desc a1_pwrc_domains[] = {
+	SEC_PD(DSPA,	0),
+	SEC_PD(DSPB,	0),
+	/* UART should keep working in ATF after suspend and before resume */
+	SEC_PD(UART,	GENPD_FLAG_ALWAYS_ON),
+	/* DMC is for DDR PHY ana/dig and DMC, and should be always on */
+	SEC_PD(DMC,	GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(I2C,	0),
+	SEC_PD(PSRAM,	0),
+	SEC_PD(ACODEC,	0),
+	SEC_PD(AUDIO,	0),
+	SEC_PD(OTP,	0),
+	SEC_PD(DMA,	0),
+	SEC_PD(SD_EMMC,	0),
+	SEC_PD(RAMA,	0),
+	/* SRAMB is used as ATF runtime memory, and should be always on */
+	SEC_PD(RAMB,	GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(IR,	0),
+	SEC_PD(SPICC,	0),
+	SEC_PD(SPIFC,	0),
+	SEC_PD(USB,	0),
+	/* NIC is for the Arm NIC-400 interconnect, and should be always on */
+	SEC_PD(NIC,	GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(PDMIN,	0),
+	SEC_PD(RSA,	0),
+};
+
+static int meson_secure_pwrc_probe(struct platform_device *pdev)
+{
+	int i;
+	struct device_node *sm_np;
+	struct meson_secure_pwrc *pwrc;
+	const struct meson_secure_pwrc_domain_data *match;
+
+	match = of_device_get_match_data(&pdev->dev);
+	if (!match) {
+		dev_err(&pdev->dev, "failed to get match data\n");
+		return -ENODEV;
+	}
+
+	sm_np = of_find_compatible_node(NULL, NULL, "amlogic,meson-gxbb-sm");
+	if (!sm_np) {
+		dev_err(&pdev->dev, "no secure-monitor node\n");
+		return -ENODEV;
+	}
+
+	pwrc = devm_kzalloc(&pdev->dev, sizeof(*pwrc), GFP_KERNEL);
+	if (!pwrc)
+		return -ENOMEM;
+
+	pwrc->fw = meson_sm_get(sm_np);
+	of_node_put(sm_np);
+	if (!pwrc->fw)
+		return -EPROBE_DEFER;
+
+	pwrc->xlate.domains = devm_kcalloc(&pdev->dev, match->count,
+					   sizeof(*pwrc->xlate.domains),
+					   GFP_KERNEL);
+	if (!pwrc->xlate.domains)
+		return -ENOMEM;
+
+	pwrc->domains = devm_kcalloc(&pdev->dev, match->count,
+				     sizeof(*pwrc->domains), GFP_KERNEL);
+	if (!pwrc->domains)
+		return -ENOMEM;
+
+	pwrc->xlate.num_domains = match->count;
+	platform_set_drvdata(pdev, pwrc);
+
+	for (i = 0 ; i < match->count ; ++i) {
+		struct meson_secure_pwrc_domain *dom = &pwrc->domains[i];
+
+		if (!match->domains[i].index)
+			continue;
+
+		dom->pwrc = pwrc;
+		dom->index = match->domains[i].index;
+		dom->base.name = match->domains[i].name;
+		dom->base.flags = match->domains[i].flags;
+		dom->base.power_on = meson_secure_pwrc_on;
+		dom->base.power_off = meson_secure_pwrc_off;
+
+		pm_genpd_init(&dom->base, NULL, match->domains[i].is_off(dom));
+
+		pwrc->xlate.domains[i] = &dom->base;
+	}
+
+	return of_genpd_add_provider_onecell(pdev->dev.of_node, &pwrc->xlate);
+}
+
+static struct meson_secure_pwrc_domain_data meson_secure_a1_pwrc_data = {
+	.domains = a1_pwrc_domains,
+	.count = ARRAY_SIZE(a1_pwrc_domains),
+};
+
+static const struct of_device_id meson_secure_pwrc_match_table[] = {
+	{
+		.compatible = "amlogic,meson-a1-pwrc",
+		.data = &meson_secure_a1_pwrc_data,
+	},
+	{ /* sentinel */ }
+};
+
+static struct platform_driver meson_secure_pwrc_driver = {
+	.probe = meson_secure_pwrc_probe,
+	.driver = {
+		.name		= "meson_secure_pwrc",
+		.of_match_table	= meson_secure_pwrc_match_table,
+	},
+};
+builtin_platform_driver(meson_secure_pwrc_driver);
diff --git a/drivers/soc/fsl/dpio/dpio-service.c b/drivers/soc/fsl/dpio/dpio-service.c
index 518a8e0..cd4f641 100644
--- a/drivers/soc/fsl/dpio/dpio-service.c
+++ b/drivers/soc/fsl/dpio/dpio-service.c
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
  * Copyright 2014-2016 Freescale Semiconductor Inc.
- * Copyright 2016 NXP
+ * Copyright 2016-2019 NXP
  *
  */
 #include <linux/types.h>
@@ -433,6 +433,69 @@ int dpaa2_io_service_enqueue_fq(struct dpaa2_io *d,
 EXPORT_SYMBOL(dpaa2_io_service_enqueue_fq);
 
 /**
+ * dpaa2_io_service_enqueue_multiple_fq() - Enqueue multiple frames
+ * to a frame queue using one fqid.
+ * @d: the given DPIO service.
+ * @fqid: the given frame queue id.
+ * @fd: the frame descriptor which is enqueued.
+ * @nb: number of frames to be enqueud
+ *
+ * Return 0 for successful enqueue, -EBUSY if the enqueue ring is not ready,
+ * or -ENODEV if there is no dpio service.
+ */
+int dpaa2_io_service_enqueue_multiple_fq(struct dpaa2_io *d,
+				u32 fqid,
+				const struct dpaa2_fd *fd,
+				int nb)
+{
+	struct qbman_eq_desc ed;
+
+	d = service_select(d);
+	if (!d)
+		return -ENODEV;
+
+	qbman_eq_desc_clear(&ed);
+	qbman_eq_desc_set_no_orp(&ed, 0);
+	qbman_eq_desc_set_fq(&ed, fqid);
+
+	return qbman_swp_enqueue_multiple(d->swp, &ed, fd, 0, nb);
+}
+EXPORT_SYMBOL(dpaa2_io_service_enqueue_multiple_fq);
+
+/**
+ * dpaa2_io_service_enqueue_multiple_desc_fq() - Enqueue multiple frames
+ * to different frame queue using a list of fqids.
+ * @d: the given DPIO service.
+ * @fqid: the given list of frame queue ids.
+ * @fd: the frame descriptor which is enqueued.
+ * @nb: number of frames to be enqueud
+ *
+ * Return 0 for successful enqueue, -EBUSY if the enqueue ring is not ready,
+ * or -ENODEV if there is no dpio service.
+ */
+int dpaa2_io_service_enqueue_multiple_desc_fq(struct dpaa2_io *d,
+				u32 *fqid,
+				const struct dpaa2_fd *fd,
+				int nb)
+{
+	int i;
+	struct qbman_eq_desc ed[32];
+
+	d = service_select(d);
+	if (!d)
+		return -ENODEV;
+
+	for (i = 0; i < nb; i++) {
+		qbman_eq_desc_clear(&ed[i]);
+		qbman_eq_desc_set_no_orp(&ed[i], 0);
+		qbman_eq_desc_set_fq(&ed[i], fqid[i]);
+	}
+
+	return qbman_swp_enqueue_multiple_desc(d->swp, &ed[0], fd, nb);
+}
+EXPORT_SYMBOL(dpaa2_io_service_enqueue_multiple_desc_fq);
+
+/**
  * dpaa2_io_service_enqueue_qd() - Enqueue a frame to a QD.
  * @d: the given DPIO service.
  * @qdid: the given queuing destination id.
@@ -526,7 +589,7 @@ EXPORT_SYMBOL_GPL(dpaa2_io_service_acquire);
 
 /**
  * dpaa2_io_store_create() - Create the dma memory storage for dequeue result.
- * @max_frames: the maximum number of dequeued result for frames, must be <= 16.
+ * @max_frames: the maximum number of dequeued result for frames, must be <= 32.
  * @dev:        the device to allow mapping/unmapping the DMAable region.
  *
  * The size of the storage is "max_frames*sizeof(struct dpaa2_dq)".
@@ -541,7 +604,7 @@ struct dpaa2_io_store *dpaa2_io_store_create(unsigned int max_frames,
 	struct dpaa2_io_store *ret;
 	size_t size;
 
-	if (!max_frames || (max_frames > 16))
+	if (!max_frames || (max_frames > 32))
 		return NULL;
 
 	ret = kmalloc(sizeof(*ret), GFP_KERNEL);
diff --git a/drivers/soc/fsl/dpio/qbman-portal.c b/drivers/soc/fsl/dpio/qbman-portal.c
index c66f5b7..d1f49ca 100644
--- a/drivers/soc/fsl/dpio/qbman-portal.c
+++ b/drivers/soc/fsl/dpio/qbman-portal.c
@@ -1,24 +1,18 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
  * Copyright (C) 2014-2016 Freescale Semiconductor, Inc.
- * Copyright 2016 NXP
+ * Copyright 2016-2019 NXP
  *
  */
 
 #include <asm/cacheflush.h>
 #include <linux/io.h>
 #include <linux/slab.h>
+#include <linux/spinlock.h>
 #include <soc/fsl/dpaa2-global.h>
 
 #include "qbman-portal.h"
 
-#define QMAN_REV_4000   0x04000000
-#define QMAN_REV_4100   0x04010000
-#define QMAN_REV_4101   0x04010001
-#define QMAN_REV_5000   0x05000000
-
-#define QMAN_REV_MASK   0xffff0000
-
 /* All QBMan command and result structures use this "valid bit" encoding */
 #define QB_VALID_BIT ((u32)0x80)
 
@@ -28,6 +22,7 @@
 
 /* CINH register offsets */
 #define QBMAN_CINH_SWP_EQCR_PI      0x800
+#define QBMAN_CINH_SWP_EQCR_CI	    0x840
 #define QBMAN_CINH_SWP_EQAR    0x8c0
 #define QBMAN_CINH_SWP_CR_RT        0x900
 #define QBMAN_CINH_SWP_VDQCR_RT     0x940
@@ -51,6 +46,8 @@
 #define QBMAN_CENA_SWP_CR      0x600
 #define QBMAN_CENA_SWP_RR(vb)  (0x700 + ((u32)(vb) >> 1))
 #define QBMAN_CENA_SWP_VDQCR   0x780
+#define QBMAN_CENA_SWP_EQCR_CI 0x840
+#define QBMAN_CENA_SWP_EQCR_CI_MEMBACK 0x1840
 
 /* CENA register offsets in memory-backed mode */
 #define QBMAN_CENA_SWP_DQRR_MEM(n)  (0x800 + ((u32)(n) << 6))
@@ -78,6 +75,12 @@
 /* opaque token for static dequeues */
 #define QMAN_SDQCR_TOKEN    0xbb
 
+#define QBMAN_EQCR_DCA_IDXMASK          0x0f
+#define QBMAN_ENQUEUE_FLAG_DCA          (1ULL << 31)
+
+#define EQ_DESC_SIZE_WITHOUT_FD 29
+#define EQ_DESC_SIZE_FD_START 32
+
 enum qbman_sdqcr_dct {
 	qbman_sdqcr_dct_null = 0,
 	qbman_sdqcr_dct_prio_ics,
@@ -90,6 +93,82 @@ enum qbman_sdqcr_fc {
 	qbman_sdqcr_fc_up_to_3 = 1
 };
 
+/* Internal Function declaration */
+static int qbman_swp_enqueue_direct(struct qbman_swp *s,
+				    const struct qbman_eq_desc *d,
+				    const struct dpaa2_fd *fd);
+static int qbman_swp_enqueue_mem_back(struct qbman_swp *s,
+				      const struct qbman_eq_desc *d,
+				      const struct dpaa2_fd *fd);
+static int qbman_swp_enqueue_multiple_direct(struct qbman_swp *s,
+					     const struct qbman_eq_desc *d,
+					     const struct dpaa2_fd *fd,
+					     uint32_t *flags,
+					     int num_frames);
+static int qbman_swp_enqueue_multiple_mem_back(struct qbman_swp *s,
+					       const struct qbman_eq_desc *d,
+					       const struct dpaa2_fd *fd,
+					       uint32_t *flags,
+					       int num_frames);
+static int
+qbman_swp_enqueue_multiple_desc_direct(struct qbman_swp *s,
+				       const struct qbman_eq_desc *d,
+				       const struct dpaa2_fd *fd,
+				       int num_frames);
+static
+int qbman_swp_enqueue_multiple_desc_mem_back(struct qbman_swp *s,
+					     const struct qbman_eq_desc *d,
+					     const struct dpaa2_fd *fd,
+					     int num_frames);
+static int qbman_swp_pull_direct(struct qbman_swp *s,
+				 struct qbman_pull_desc *d);
+static int qbman_swp_pull_mem_back(struct qbman_swp *s,
+				   struct qbman_pull_desc *d);
+
+const struct dpaa2_dq *qbman_swp_dqrr_next_direct(struct qbman_swp *s);
+const struct dpaa2_dq *qbman_swp_dqrr_next_mem_back(struct qbman_swp *s);
+
+static int qbman_swp_release_direct(struct qbman_swp *s,
+				    const struct qbman_release_desc *d,
+				    const u64 *buffers,
+				    unsigned int num_buffers);
+static int qbman_swp_release_mem_back(struct qbman_swp *s,
+				      const struct qbman_release_desc *d,
+				      const u64 *buffers,
+				      unsigned int num_buffers);
+
+/* Function pointers */
+int (*qbman_swp_enqueue_ptr)(struct qbman_swp *s,
+			     const struct qbman_eq_desc *d,
+			     const struct dpaa2_fd *fd)
+	= qbman_swp_enqueue_direct;
+
+int (*qbman_swp_enqueue_multiple_ptr)(struct qbman_swp *s,
+				      const struct qbman_eq_desc *d,
+				      const struct dpaa2_fd *fd,
+				      uint32_t *flags,
+					     int num_frames)
+	= qbman_swp_enqueue_multiple_direct;
+
+int
+(*qbman_swp_enqueue_multiple_desc_ptr)(struct qbman_swp *s,
+				       const struct qbman_eq_desc *d,
+				       const struct dpaa2_fd *fd,
+				       int num_frames)
+	= qbman_swp_enqueue_multiple_desc_direct;
+
+int (*qbman_swp_pull_ptr)(struct qbman_swp *s, struct qbman_pull_desc *d)
+			= qbman_swp_pull_direct;
+
+const struct dpaa2_dq *(*qbman_swp_dqrr_next_ptr)(struct qbman_swp *s)
+			= qbman_swp_dqrr_next_direct;
+
+int (*qbman_swp_release_ptr)(struct qbman_swp *s,
+			     const struct qbman_release_desc *d,
+			     const u64 *buffers,
+			     unsigned int num_buffers)
+			= qbman_swp_release_direct;
+
 /* Portal Access */
 
 static inline u32 qbman_read_register(struct qbman_swp *p, u32 offset)
@@ -146,6 +225,15 @@ static inline u32 qbman_set_swp_cfg(u8 max_fill, u8 wn,	u8 est, u8 rpm, u8 dcm,
 
 #define QMAN_RT_MODE	   0x00000100
 
+static inline u8 qm_cyc_diff(u8 ringsize, u8 first, u8 last)
+{
+	/* 'first' is included, 'last' is excluded */
+	if (first <= last)
+		return last - first;
+	else
+		return (2 * ringsize) - (first - last);
+}
+
 /**
  * qbman_swp_init() - Create a functional object representing the given
  *                    QBMan portal descriptor.
@@ -156,11 +244,16 @@ static inline u32 qbman_set_swp_cfg(u8 max_fill, u8 wn,	u8 est, u8 rpm, u8 dcm,
  */
 struct qbman_swp *qbman_swp_init(const struct qbman_swp_desc *d)
 {
-	struct qbman_swp *p = kmalloc(sizeof(*p), GFP_KERNEL);
+	struct qbman_swp *p = kzalloc(sizeof(*p), GFP_KERNEL);
 	u32 reg;
+	u32 mask_size;
+	u32 eqcr_pi;
 
 	if (!p)
 		return NULL;
+
+	spin_lock_init(&p->access_spinlock);
+
 	p->desc = d;
 	p->mc.valid_bit = QB_VALID_BIT;
 	p->sdq = 0;
@@ -186,25 +279,38 @@ struct qbman_swp *qbman_swp_init(const struct qbman_swp_desc *d)
 	p->addr_cena = d->cena_bar;
 	p->addr_cinh = d->cinh_bar;
 
-	if ((p->desc->qman_version & QMAN_REV_MASK) >= QMAN_REV_5000)
-		memset(p->addr_cena, 0, 64 * 1024);
+	if ((p->desc->qman_version & QMAN_REV_MASK) < QMAN_REV_5000) {
 
-	reg = qbman_set_swp_cfg(p->dqrr.dqrr_size,
-				1, /* Writes Non-cacheable */
-				0, /* EQCR_CI stashing threshold */
-				3, /* RPM: Valid bit mode, RCR in array mode */
-				2, /* DCM: Discrete consumption ack mode */
-				3, /* EPM: Valid bit mode, EQCR in array mode */
-				1, /* mem stashing drop enable == TRUE */
-				1, /* mem stashing priority == TRUE */
-				1, /* mem stashing enable == TRUE */
-				1, /* dequeue stashing priority == TRUE */
-				0, /* dequeue stashing enable == FALSE */
-				0); /* EQCR_CI stashing priority == FALSE */
-	if ((p->desc->qman_version & QMAN_REV_MASK) >= QMAN_REV_5000)
+		reg = qbman_set_swp_cfg(p->dqrr.dqrr_size,
+			1, /* Writes Non-cacheable */
+			0, /* EQCR_CI stashing threshold */
+			3, /* RPM: RCR in array mode */
+			2, /* DCM: Discrete consumption ack */
+			2, /* EPM: EQCR in ring mode */
+			1, /* mem stashing drop enable enable */
+			1, /* mem stashing priority enable */
+			1, /* mem stashing enable */
+			1, /* dequeue stashing priority enable */
+			0, /* dequeue stashing enable enable */
+			0); /* EQCR_CI stashing priority enable */
+	} else {
+		memset(p->addr_cena, 0, 64 * 1024);
+		reg = qbman_set_swp_cfg(p->dqrr.dqrr_size,
+			1, /* Writes Non-cacheable */
+			1, /* EQCR_CI stashing threshold */
+			3, /* RPM: RCR in array mode */
+			2, /* DCM: Discrete consumption ack */
+			0, /* EPM: EQCR in ring mode */
+			1, /* mem stashing drop enable */
+			1, /* mem stashing priority enable */
+			1, /* mem stashing enable */
+			1, /* dequeue stashing priority enable */
+			0, /* dequeue stashing enable */
+			0); /* EQCR_CI stashing priority enable */
 		reg |= 1 << SWP_CFG_CPBS_SHIFT | /* memory-backed mode */
 		       1 << SWP_CFG_VPM_SHIFT |  /* VDQCR read triggered mode */
 		       1 << SWP_CFG_CPM_SHIFT;   /* CR read triggered mode */
+	}
 
 	qbman_write_register(p, QBMAN_CINH_SWP_CFG, reg);
 	reg = qbman_read_register(p, QBMAN_CINH_SWP_CFG);
@@ -225,6 +331,30 @@ struct qbman_swp *qbman_swp_init(const struct qbman_swp_desc *d)
 	 * applied when dequeues from a specific channel are enabled.
 	 */
 	qbman_write_register(p, QBMAN_CINH_SWP_SDQCR, 0);
+
+	p->eqcr.pi_ring_size = 8;
+	if ((p->desc->qman_version & QMAN_REV_MASK) >= QMAN_REV_5000) {
+		p->eqcr.pi_ring_size = 32;
+		qbman_swp_enqueue_ptr =
+			qbman_swp_enqueue_mem_back;
+		qbman_swp_enqueue_multiple_ptr =
+			qbman_swp_enqueue_multiple_mem_back;
+		qbman_swp_enqueue_multiple_desc_ptr =
+			qbman_swp_enqueue_multiple_desc_mem_back;
+		qbman_swp_pull_ptr = qbman_swp_pull_mem_back;
+		qbman_swp_dqrr_next_ptr = qbman_swp_dqrr_next_mem_back;
+		qbman_swp_release_ptr = qbman_swp_release_mem_back;
+	}
+
+	for (mask_size = p->eqcr.pi_ring_size; mask_size > 0; mask_size >>= 1)
+		p->eqcr.pi_ci_mask = (p->eqcr.pi_ci_mask << 1) + 1;
+	eqcr_pi = qbman_read_register(p, QBMAN_CINH_SWP_EQCR_PI);
+	p->eqcr.pi = eqcr_pi & p->eqcr.pi_ci_mask;
+	p->eqcr.pi_vb = eqcr_pi & QB_VALID_BIT;
+	p->eqcr.ci = qbman_read_register(p, QBMAN_CINH_SWP_EQCR_CI)
+			& p->eqcr.pi_ci_mask;
+	p->eqcr.available = p->eqcr.pi_ring_size;
+
 	return p;
 }
 
@@ -378,6 +508,7 @@ enum qb_enqueue_commands {
 #define QB_ENQUEUE_CMD_ORP_ENABLE_SHIFT      2
 #define QB_ENQUEUE_CMD_IRQ_ON_DISPATCH_SHIFT 3
 #define QB_ENQUEUE_CMD_TARGET_TYPE_SHIFT     4
+#define QB_ENQUEUE_CMD_DCA_EN_SHIFT          7
 
 /**
  * qbman_eq_desc_clear() - Clear the contents of a descriptor to
@@ -453,8 +584,9 @@ static inline void qbman_write_eqcr_am_rt_register(struct qbman_swp *p,
 				     QMAN_RT_MODE);
 }
 
+#define QB_RT_BIT ((u32)0x100)
 /**
- * qbman_swp_enqueue() - Issue an enqueue command
+ * qbman_swp_enqueue_direct() - Issue an enqueue command
  * @s:  the software portal used for enqueue
  * @d:  the enqueue descriptor
  * @fd: the frame descriptor to be enqueued
@@ -464,30 +596,351 @@ static inline void qbman_write_eqcr_am_rt_register(struct qbman_swp *p,
  *
  * Return 0 for successful enqueue, -EBUSY if the EQCR is not ready.
  */
-int qbman_swp_enqueue(struct qbman_swp *s, const struct qbman_eq_desc *d,
-		      const struct dpaa2_fd *fd)
+static
+int qbman_swp_enqueue_direct(struct qbman_swp *s,
+			     const struct qbman_eq_desc *d,
+			     const struct dpaa2_fd *fd)
 {
-	struct qbman_eq_desc *p;
-	u32 eqar = qbman_read_register(s, QBMAN_CINH_SWP_EQAR);
+	int flags = 0;
+	int ret = qbman_swp_enqueue_multiple_direct(s, d, fd, &flags, 1);
 
-	if (!EQAR_SUCCESS(eqar))
-		return -EBUSY;
+	if (ret >= 0)
+		ret = 0;
+	else
+		ret = -EBUSY;
+	return  ret;
+}
 
-	p = qbman_get_cmd(s, QBMAN_CENA_SWP_EQCR(EQAR_IDX(eqar)));
-	memcpy(&p->dca, &d->dca, 31);
-	memcpy(&p->fd, fd, sizeof(*fd));
+/**
+ * qbman_swp_enqueue_mem_back() - Issue an enqueue command
+ * @s:  the software portal used for enqueue
+ * @d:  the enqueue descriptor
+ * @fd: the frame descriptor to be enqueued
+ *
+ * Please note that 'fd' should only be NULL if the "action" of the
+ * descriptor is "orp_hole" or "orp_nesn".
+ *
+ * Return 0 for successful enqueue, -EBUSY if the EQCR is not ready.
+ */
+static
+int qbman_swp_enqueue_mem_back(struct qbman_swp *s,
+			       const struct qbman_eq_desc *d,
+			       const struct dpaa2_fd *fd)
+{
+	int flags = 0;
+	int ret = qbman_swp_enqueue_multiple_mem_back(s, d, fd, &flags, 1);
 
-	if ((s->desc->qman_version & QMAN_REV_MASK) < QMAN_REV_5000) {
-		/* Set the verb byte, have to substitute in the valid-bit */
-		dma_wmb();
-		p->verb = d->verb | EQAR_VB(eqar);
-	} else {
-		p->verb = d->verb | EQAR_VB(eqar);
-		dma_wmb();
-		qbman_write_eqcr_am_rt_register(s, EQAR_IDX(eqar));
+	if (ret >= 0)
+		ret = 0;
+	else
+		ret = -EBUSY;
+	return  ret;
+}
+
+/**
+ * qbman_swp_enqueue_multiple_direct() - Issue a multi enqueue command
+ * using one enqueue descriptor
+ * @s:  the software portal used for enqueue
+ * @d:  the enqueue descriptor
+ * @fd: table pointer of frame descriptor table to be enqueued
+ * @flags: table pointer of QBMAN_ENQUEUE_FLAG_DCA flags, not used if NULL
+ * @num_frames: number of fd to be enqueued
+ *
+ * Return the number of fd enqueued, or a negative error number.
+ */
+static
+int qbman_swp_enqueue_multiple_direct(struct qbman_swp *s,
+				      const struct qbman_eq_desc *d,
+				      const struct dpaa2_fd *fd,
+				      uint32_t *flags,
+				      int num_frames)
+{
+	uint32_t *p = NULL;
+	const uint32_t *cl = (uint32_t *)d;
+	uint32_t eqcr_ci, eqcr_pi, half_mask, full_mask;
+	int i, num_enqueued = 0;
+	uint64_t addr_cena;
+
+	spin_lock(&s->access_spinlock);
+	half_mask = (s->eqcr.pi_ci_mask>>1);
+	full_mask = s->eqcr.pi_ci_mask;
+
+	if (!s->eqcr.available) {
+		eqcr_ci = s->eqcr.ci;
+		p = s->addr_cena + QBMAN_CENA_SWP_EQCR_CI;
+		s->eqcr.ci = qbman_read_register(s, QBMAN_CINH_SWP_EQCR_CI);
+
+		s->eqcr.available = qm_cyc_diff(s->eqcr.pi_ring_size,
+					eqcr_ci, s->eqcr.ci);
+		if (!s->eqcr.available) {
+			spin_unlock(&s->access_spinlock);
+			return 0;
+		}
 	}
 
-	return 0;
+	eqcr_pi = s->eqcr.pi;
+	num_enqueued = (s->eqcr.available < num_frames) ?
+			s->eqcr.available : num_frames;
+	s->eqcr.available -= num_enqueued;
+	/* Fill in the EQCR ring */
+	for (i = 0; i < num_enqueued; i++) {
+		p = (s->addr_cena + QBMAN_CENA_SWP_EQCR(eqcr_pi & half_mask));
+		/* Skip copying the verb */
+		memcpy(&p[1], &cl[1], EQ_DESC_SIZE_WITHOUT_FD - 1);
+		memcpy(&p[EQ_DESC_SIZE_FD_START/sizeof(uint32_t)],
+		       &fd[i], sizeof(*fd));
+		eqcr_pi++;
+	}
+
+	dma_wmb();
+
+	/* Set the verb byte, have to substitute in the valid-bit */
+	eqcr_pi = s->eqcr.pi;
+	for (i = 0; i < num_enqueued; i++) {
+		p = (s->addr_cena + QBMAN_CENA_SWP_EQCR(eqcr_pi & half_mask));
+		p[0] = cl[0] | s->eqcr.pi_vb;
+		if (flags && (flags[i] & QBMAN_ENQUEUE_FLAG_DCA)) {
+			struct qbman_eq_desc *d = (struct qbman_eq_desc *)p;
+
+			d->dca = (1 << QB_ENQUEUE_CMD_DCA_EN_SHIFT) |
+				((flags[i]) & QBMAN_EQCR_DCA_IDXMASK);
+		}
+		eqcr_pi++;
+		if (!(eqcr_pi & half_mask))
+			s->eqcr.pi_vb ^= QB_VALID_BIT;
+	}
+
+	/* Flush all the cacheline without load/store in between */
+	eqcr_pi = s->eqcr.pi;
+	addr_cena = (size_t)s->addr_cena;
+	for (i = 0; i < num_enqueued; i++)
+		eqcr_pi++;
+	s->eqcr.pi = eqcr_pi & full_mask;
+	spin_unlock(&s->access_spinlock);
+
+	return num_enqueued;
+}
+
+/**
+ * qbman_swp_enqueue_multiple_mem_back() - Issue a multi enqueue command
+ * using one enqueue descriptor
+ * @s:  the software portal used for enqueue
+ * @d:  the enqueue descriptor
+ * @fd: table pointer of frame descriptor table to be enqueued
+ * @flags: table pointer of QBMAN_ENQUEUE_FLAG_DCA flags, not used if NULL
+ * @num_frames: number of fd to be enqueued
+ *
+ * Return the number of fd enqueued, or a negative error number.
+ */
+static
+int qbman_swp_enqueue_multiple_mem_back(struct qbman_swp *s,
+					const struct qbman_eq_desc *d,
+					const struct dpaa2_fd *fd,
+					uint32_t *flags,
+					int num_frames)
+{
+	uint32_t *p = NULL;
+	const uint32_t *cl = (uint32_t *)(d);
+	uint32_t eqcr_ci, eqcr_pi, half_mask, full_mask;
+	int i, num_enqueued = 0;
+	unsigned long irq_flags;
+
+	spin_lock(&s->access_spinlock);
+	local_irq_save(irq_flags);
+
+	half_mask = (s->eqcr.pi_ci_mask>>1);
+	full_mask = s->eqcr.pi_ci_mask;
+	if (!s->eqcr.available) {
+		eqcr_ci = s->eqcr.ci;
+		p = s->addr_cena + QBMAN_CENA_SWP_EQCR_CI_MEMBACK;
+		s->eqcr.ci = __raw_readl(p) & full_mask;
+		s->eqcr.available = qm_cyc_diff(s->eqcr.pi_ring_size,
+					eqcr_ci, s->eqcr.ci);
+		if (!s->eqcr.available) {
+			local_irq_restore(irq_flags);
+			spin_unlock(&s->access_spinlock);
+			return 0;
+		}
+	}
+
+	eqcr_pi = s->eqcr.pi;
+	num_enqueued = (s->eqcr.available < num_frames) ?
+			s->eqcr.available : num_frames;
+	s->eqcr.available -= num_enqueued;
+	/* Fill in the EQCR ring */
+	for (i = 0; i < num_enqueued; i++) {
+		p = (s->addr_cena + QBMAN_CENA_SWP_EQCR(eqcr_pi & half_mask));
+		/* Skip copying the verb */
+		memcpy(&p[1], &cl[1], EQ_DESC_SIZE_WITHOUT_FD - 1);
+		memcpy(&p[EQ_DESC_SIZE_FD_START/sizeof(uint32_t)],
+		       &fd[i], sizeof(*fd));
+		eqcr_pi++;
+	}
+
+	/* Set the verb byte, have to substitute in the valid-bit */
+	eqcr_pi = s->eqcr.pi;
+	for (i = 0; i < num_enqueued; i++) {
+		p = (s->addr_cena + QBMAN_CENA_SWP_EQCR(eqcr_pi & half_mask));
+		p[0] = cl[0] | s->eqcr.pi_vb;
+		if (flags && (flags[i] & QBMAN_ENQUEUE_FLAG_DCA)) {
+			struct qbman_eq_desc *d = (struct qbman_eq_desc *)p;
+
+			d->dca = (1 << QB_ENQUEUE_CMD_DCA_EN_SHIFT) |
+				((flags[i]) & QBMAN_EQCR_DCA_IDXMASK);
+		}
+		eqcr_pi++;
+		if (!(eqcr_pi & half_mask))
+			s->eqcr.pi_vb ^= QB_VALID_BIT;
+	}
+	s->eqcr.pi = eqcr_pi & full_mask;
+
+	dma_wmb();
+	qbman_write_register(s, QBMAN_CINH_SWP_EQCR_PI,
+				(QB_RT_BIT)|(s->eqcr.pi)|s->eqcr.pi_vb);
+	local_irq_restore(irq_flags);
+	spin_unlock(&s->access_spinlock);
+
+	return num_enqueued;
+}
+
+/**
+ * qbman_swp_enqueue_multiple_desc_direct() - Issue a multi enqueue command
+ * using multiple enqueue descriptor
+ * @s:  the software portal used for enqueue
+ * @d:  table of minimal enqueue descriptor
+ * @fd: table pointer of frame descriptor table to be enqueued
+ * @num_frames: number of fd to be enqueued
+ *
+ * Return the number of fd enqueued, or a negative error number.
+ */
+static
+int qbman_swp_enqueue_multiple_desc_direct(struct qbman_swp *s,
+					   const struct qbman_eq_desc *d,
+					   const struct dpaa2_fd *fd,
+					   int num_frames)
+{
+	uint32_t *p;
+	const uint32_t *cl;
+	uint32_t eqcr_ci, eqcr_pi, half_mask, full_mask;
+	int i, num_enqueued = 0;
+	uint64_t addr_cena;
+
+	half_mask = (s->eqcr.pi_ci_mask>>1);
+	full_mask = s->eqcr.pi_ci_mask;
+	if (!s->eqcr.available) {
+		eqcr_ci = s->eqcr.ci;
+		p = s->addr_cena + QBMAN_CENA_SWP_EQCR_CI;
+		s->eqcr.ci = qbman_read_register(s, QBMAN_CINH_SWP_EQCR_CI);
+		s->eqcr.available = qm_cyc_diff(s->eqcr.pi_ring_size,
+					eqcr_ci, s->eqcr.ci);
+		if (!s->eqcr.available)
+			return 0;
+	}
+
+	eqcr_pi = s->eqcr.pi;
+	num_enqueued = (s->eqcr.available < num_frames) ?
+			s->eqcr.available : num_frames;
+	s->eqcr.available -= num_enqueued;
+	/* Fill in the EQCR ring */
+	for (i = 0; i < num_enqueued; i++) {
+		p = (s->addr_cena + QBMAN_CENA_SWP_EQCR(eqcr_pi & half_mask));
+		cl = (uint32_t *)(&d[i]);
+		/* Skip copying the verb */
+		memcpy(&p[1], &cl[1], EQ_DESC_SIZE_WITHOUT_FD - 1);
+		memcpy(&p[EQ_DESC_SIZE_FD_START/sizeof(uint32_t)],
+		       &fd[i], sizeof(*fd));
+		eqcr_pi++;
+	}
+
+	dma_wmb();
+
+	/* Set the verb byte, have to substitute in the valid-bit */
+	eqcr_pi = s->eqcr.pi;
+	for (i = 0; i < num_enqueued; i++) {
+		p = (s->addr_cena + QBMAN_CENA_SWP_EQCR(eqcr_pi & half_mask));
+		cl = (uint32_t *)(&d[i]);
+		p[0] = cl[0] | s->eqcr.pi_vb;
+		eqcr_pi++;
+		if (!(eqcr_pi & half_mask))
+			s->eqcr.pi_vb ^= QB_VALID_BIT;
+	}
+
+	/* Flush all the cacheline without load/store in between */
+	eqcr_pi = s->eqcr.pi;
+	addr_cena = (uint64_t)s->addr_cena;
+	for (i = 0; i < num_enqueued; i++)
+		eqcr_pi++;
+	s->eqcr.pi = eqcr_pi & full_mask;
+
+	return num_enqueued;
+}
+
+/**
+ * qbman_swp_enqueue_multiple_desc_mem_back() - Issue a multi enqueue command
+ * using multiple enqueue descriptor
+ * @s:  the software portal used for enqueue
+ * @d:  table of minimal enqueue descriptor
+ * @fd: table pointer of frame descriptor table to be enqueued
+ * @num_frames: number of fd to be enqueued
+ *
+ * Return the number of fd enqueued, or a negative error number.
+ */
+static
+int qbman_swp_enqueue_multiple_desc_mem_back(struct qbman_swp *s,
+					   const struct qbman_eq_desc *d,
+					   const struct dpaa2_fd *fd,
+					   int num_frames)
+{
+	uint32_t *p;
+	const uint32_t *cl;
+	uint32_t eqcr_ci, eqcr_pi, half_mask, full_mask;
+	int i, num_enqueued = 0;
+
+	half_mask = (s->eqcr.pi_ci_mask>>1);
+	full_mask = s->eqcr.pi_ci_mask;
+	if (!s->eqcr.available) {
+		eqcr_ci = s->eqcr.ci;
+		p = s->addr_cena + QBMAN_CENA_SWP_EQCR_CI_MEMBACK;
+		s->eqcr.ci = __raw_readl(p) & full_mask;
+		s->eqcr.available = qm_cyc_diff(s->eqcr.pi_ring_size,
+					eqcr_ci, s->eqcr.ci);
+		if (!s->eqcr.available)
+			return 0;
+	}
+
+	eqcr_pi = s->eqcr.pi;
+	num_enqueued = (s->eqcr.available < num_frames) ?
+			s->eqcr.available : num_frames;
+	s->eqcr.available -= num_enqueued;
+	/* Fill in the EQCR ring */
+	for (i = 0; i < num_enqueued; i++) {
+		p = (s->addr_cena + QBMAN_CENA_SWP_EQCR(eqcr_pi & half_mask));
+		cl = (uint32_t *)(&d[i]);
+		/* Skip copying the verb */
+		memcpy(&p[1], &cl[1], EQ_DESC_SIZE_WITHOUT_FD - 1);
+		memcpy(&p[EQ_DESC_SIZE_FD_START/sizeof(uint32_t)],
+		       &fd[i], sizeof(*fd));
+		eqcr_pi++;
+	}
+
+	/* Set the verb byte, have to substitute in the valid-bit */
+	eqcr_pi = s->eqcr.pi;
+	for (i = 0; i < num_enqueued; i++) {
+		p = (s->addr_cena + QBMAN_CENA_SWP_EQCR(eqcr_pi & half_mask));
+		cl = (uint32_t *)(&d[i]);
+		p[0] = cl[0] | s->eqcr.pi_vb;
+		eqcr_pi++;
+		if (!(eqcr_pi & half_mask))
+			s->eqcr.pi_vb ^= QB_VALID_BIT;
+	}
+
+	s->eqcr.pi = eqcr_pi & full_mask;
+
+	dma_wmb();
+	qbman_write_register(s, QBMAN_CINH_SWP_EQCR_PI,
+				(QB_RT_BIT)|(s->eqcr.pi)|s->eqcr.pi_vb);
+
+	return num_enqueued;
 }
 
 /* Static (push) dequeue */
@@ -645,7 +1098,7 @@ void qbman_pull_desc_set_channel(struct qbman_pull_desc *d, u32 chid,
 }
 
 /**
- * qbman_swp_pull() - Issue the pull dequeue command
+ * qbman_swp_pull_direct() - Issue the pull dequeue command
  * @s: the software portal object
  * @d: the software portal descriptor which has been configured with
  *     the set of qbman_pull_desc_set_*() calls
@@ -653,7 +1106,44 @@ void qbman_pull_desc_set_channel(struct qbman_pull_desc *d, u32 chid,
  * Return 0 for success, and -EBUSY if the software portal is not ready
  * to do pull dequeue.
  */
-int qbman_swp_pull(struct qbman_swp *s, struct qbman_pull_desc *d)
+static
+int qbman_swp_pull_direct(struct qbman_swp *s, struct qbman_pull_desc *d)
+{
+	struct qbman_pull_desc *p;
+
+	if (!atomic_dec_and_test(&s->vdq.available)) {
+		atomic_inc(&s->vdq.available);
+		return -EBUSY;
+	}
+	s->vdq.storage = (void *)(uintptr_t)d->rsp_addr_virt;
+	if ((s->desc->qman_version & QMAN_REV_MASK) < QMAN_REV_5000)
+		p = qbman_get_cmd(s, QBMAN_CENA_SWP_VDQCR);
+	else
+		p = qbman_get_cmd(s, QBMAN_CENA_SWP_VDQCR_MEM);
+	p->numf = d->numf;
+	p->tok = QMAN_DQ_TOKEN_VALID;
+	p->dq_src = d->dq_src;
+	p->rsp_addr = d->rsp_addr;
+	p->rsp_addr_virt = d->rsp_addr_virt;
+	dma_wmb();
+	/* Set the verb byte, have to substitute in the valid-bit */
+	p->verb = d->verb | s->vdq.valid_bit;
+	s->vdq.valid_bit ^= QB_VALID_BIT;
+
+	return 0;
+}
+
+/**
+ * qbman_swp_pull_mem_back() - Issue the pull dequeue command
+ * @s: the software portal object
+ * @d: the software portal descriptor which has been configured with
+ *     the set of qbman_pull_desc_set_*() calls
+ *
+ * Return 0 for success, and -EBUSY if the software portal is not ready
+ * to do pull dequeue.
+ */
+static
+int qbman_swp_pull_mem_back(struct qbman_swp *s, struct qbman_pull_desc *d)
 {
 	struct qbman_pull_desc *p;
 
@@ -672,17 +1162,11 @@ int qbman_swp_pull(struct qbman_swp *s, struct qbman_pull_desc *d)
 	p->rsp_addr = d->rsp_addr;
 	p->rsp_addr_virt = d->rsp_addr_virt;
 
-	if ((s->desc->qman_version & QMAN_REV_MASK) < QMAN_REV_5000) {
-		dma_wmb();
-		/* Set the verb byte, have to substitute in the valid-bit */
-		p->verb = d->verb | s->vdq.valid_bit;
-		s->vdq.valid_bit ^= QB_VALID_BIT;
-	} else {
-		p->verb = d->verb | s->vdq.valid_bit;
-		s->vdq.valid_bit ^= QB_VALID_BIT;
-		dma_wmb();
-		qbman_write_register(s, QBMAN_CINH_SWP_VDQCR_RT, QMAN_RT_MODE);
-	}
+	/* Set the verb byte, have to substitute in the valid-bit */
+	p->verb = d->verb | s->vdq.valid_bit;
+	s->vdq.valid_bit ^= QB_VALID_BIT;
+	dma_wmb();
+	qbman_write_register(s, QBMAN_CINH_SWP_VDQCR_RT, QMAN_RT_MODE);
 
 	return 0;
 }
@@ -690,14 +1174,14 @@ int qbman_swp_pull(struct qbman_swp *s, struct qbman_pull_desc *d)
 #define QMAN_DQRR_PI_MASK   0xf
 
 /**
- * qbman_swp_dqrr_next() - Get an valid DQRR entry
+ * qbman_swp_dqrr_next_direct() - Get an valid DQRR entry
  * @s: the software portal object
  *
  * Return NULL if there are no unconsumed DQRR entries. Return a DQRR entry
  * only once, so repeated calls can return a sequence of DQRR entries, without
  * requiring they be consumed immediately or in any particular order.
  */
-const struct dpaa2_dq *qbman_swp_dqrr_next(struct qbman_swp *s)
+const struct dpaa2_dq *qbman_swp_dqrr_next_direct(struct qbman_swp *s)
 {
 	u32 verb;
 	u32 response_verb;
@@ -740,10 +1224,99 @@ const struct dpaa2_dq *qbman_swp_dqrr_next(struct qbman_swp *s)
 				       QBMAN_CENA_SWP_DQRR(s->dqrr.next_idx)));
 	}
 
-	if ((s->desc->qman_version & QMAN_REV_MASK) < QMAN_REV_5000)
-		p = qbman_get_cmd(s, QBMAN_CENA_SWP_DQRR(s->dqrr.next_idx));
-	else
-		p = qbman_get_cmd(s, QBMAN_CENA_SWP_DQRR_MEM(s->dqrr.next_idx));
+	p = qbman_get_cmd(s, QBMAN_CENA_SWP_DQRR(s->dqrr.next_idx));
+	verb = p->dq.verb;
+
+	/*
+	 * If the valid-bit isn't of the expected polarity, nothing there. Note,
+	 * in the DQRR reset bug workaround, we shouldn't need to skip these
+	 * check, because we've already determined that a new entry is available
+	 * and we've invalidated the cacheline before reading it, so the
+	 * valid-bit behaviour is repaired and should tell us what we already
+	 * knew from reading PI.
+	 */
+	if ((verb & QB_VALID_BIT) != s->dqrr.valid_bit) {
+		prefetch(qbman_get_cmd(s,
+				       QBMAN_CENA_SWP_DQRR(s->dqrr.next_idx)));
+		return NULL;
+	}
+	/*
+	 * There's something there. Move "next_idx" attention to the next ring
+	 * entry (and prefetch it) before returning what we found.
+	 */
+	s->dqrr.next_idx++;
+	s->dqrr.next_idx &= s->dqrr.dqrr_size - 1; /* Wrap around */
+	if (!s->dqrr.next_idx)
+		s->dqrr.valid_bit ^= QB_VALID_BIT;
+
+	/*
+	 * If this is the final response to a volatile dequeue command
+	 * indicate that the vdq is available
+	 */
+	flags = p->dq.stat;
+	response_verb = verb & QBMAN_RESULT_MASK;
+	if ((response_verb == QBMAN_RESULT_DQ) &&
+	    (flags & DPAA2_DQ_STAT_VOLATILE) &&
+	    (flags & DPAA2_DQ_STAT_EXPIRED))
+		atomic_inc(&s->vdq.available);
+
+	prefetch(qbman_get_cmd(s, QBMAN_CENA_SWP_DQRR(s->dqrr.next_idx)));
+
+	return p;
+}
+
+/**
+ * qbman_swp_dqrr_next_mem_back() - Get an valid DQRR entry
+ * @s: the software portal object
+ *
+ * Return NULL if there are no unconsumed DQRR entries. Return a DQRR entry
+ * only once, so repeated calls can return a sequence of DQRR entries, without
+ * requiring they be consumed immediately or in any particular order.
+ */
+const struct dpaa2_dq *qbman_swp_dqrr_next_mem_back(struct qbman_swp *s)
+{
+	u32 verb;
+	u32 response_verb;
+	u32 flags;
+	struct dpaa2_dq *p;
+
+	/* Before using valid-bit to detect if something is there, we have to
+	 * handle the case of the DQRR reset bug...
+	 */
+	if (unlikely(s->dqrr.reset_bug)) {
+		/*
+		 * We pick up new entries by cache-inhibited producer index,
+		 * which means that a non-coherent mapping would require us to
+		 * invalidate and read *only* once that PI has indicated that
+		 * there's an entry here. The first trip around the DQRR ring
+		 * will be much less efficient than all subsequent trips around
+		 * it...
+		 */
+		u8 pi = qbman_read_register(s, QBMAN_CINH_SWP_DQPI) &
+			QMAN_DQRR_PI_MASK;
+
+		/* there are new entries if pi != next_idx */
+		if (pi == s->dqrr.next_idx)
+			return NULL;
+
+		/*
+		 * if next_idx is/was the last ring index, and 'pi' is
+		 * different, we can disable the workaround as all the ring
+		 * entries have now been DMA'd to so valid-bit checking is
+		 * repaired. Note: this logic needs to be based on next_idx
+		 * (which increments one at a time), rather than on pi (which
+		 * can burst and wrap-around between our snapshots of it).
+		 */
+		if (s->dqrr.next_idx == (s->dqrr.dqrr_size - 1)) {
+			pr_debug("next_idx=%d, pi=%d, clear reset bug\n",
+				 s->dqrr.next_idx, pi);
+			s->dqrr.reset_bug = 0;
+		}
+		prefetch(qbman_get_cmd(s,
+				       QBMAN_CENA_SWP_DQRR(s->dqrr.next_idx)));
+	}
+
+	p = qbman_get_cmd(s, QBMAN_CENA_SWP_DQRR_MEM(s->dqrr.next_idx));
 	verb = p->dq.verb;
 
 	/*
@@ -872,7 +1445,7 @@ void qbman_release_desc_set_rcdi(struct qbman_release_desc *d, int enable)
 #define RAR_SUCCESS(rar) ((rar) & 0x100)
 
 /**
- * qbman_swp_release() - Issue a buffer release command
+ * qbman_swp_release_direct() - Issue a buffer release command
  * @s:           the software portal object
  * @d:           the release descriptor
  * @buffers:     a pointer pointing to the buffer address to be released
@@ -880,8 +1453,9 @@ void qbman_release_desc_set_rcdi(struct qbman_release_desc *d, int enable)
  *
  * Return 0 for success, -EBUSY if the release command ring is not ready.
  */
-int qbman_swp_release(struct qbman_swp *s, const struct qbman_release_desc *d,
-		      const u64 *buffers, unsigned int num_buffers)
+int qbman_swp_release_direct(struct qbman_swp *s,
+			     const struct qbman_release_desc *d,
+			     const u64 *buffers, unsigned int num_buffers)
 {
 	int i;
 	struct qbman_release_desc *p;
@@ -895,28 +1469,59 @@ int qbman_swp_release(struct qbman_swp *s, const struct qbman_release_desc *d,
 		return -EBUSY;
 
 	/* Start the release command */
-	if ((s->desc->qman_version & QMAN_REV_MASK) < QMAN_REV_5000)
-		p = qbman_get_cmd(s, QBMAN_CENA_SWP_RCR(RAR_IDX(rar)));
-	else
-		p = qbman_get_cmd(s, QBMAN_CENA_SWP_RCR_MEM(RAR_IDX(rar)));
+	p = qbman_get_cmd(s, QBMAN_CENA_SWP_RCR(RAR_IDX(rar)));
+
 	/* Copy the caller's buffer pointers to the command */
 	for (i = 0; i < num_buffers; i++)
 		p->buf[i] = cpu_to_le64(buffers[i]);
 	p->bpid = d->bpid;
 
-	if ((s->desc->qman_version & QMAN_REV_MASK) < QMAN_REV_5000) {
-		/*
-		 * Set the verb byte, have to substitute in the valid-bit
-		 * and the number of buffers.
-		 */
-		dma_wmb();
-		p->verb = d->verb | RAR_VB(rar) | num_buffers;
-	} else {
-		p->verb = d->verb | RAR_VB(rar) | num_buffers;
-		dma_wmb();
-		qbman_write_register(s, QBMAN_CINH_SWP_RCR_AM_RT +
-				     RAR_IDX(rar)  * 4, QMAN_RT_MODE);
-	}
+	/*
+	 * Set the verb byte, have to substitute in the valid-bit
+	 * and the number of buffers.
+	 */
+	dma_wmb();
+	p->verb = d->verb | RAR_VB(rar) | num_buffers;
+
+	return 0;
+}
+
+/**
+ * qbman_swp_release_mem_back() - Issue a buffer release command
+ * @s:           the software portal object
+ * @d:           the release descriptor
+ * @buffers:     a pointer pointing to the buffer address to be released
+ * @num_buffers: number of buffers to be released,  must be less than 8
+ *
+ * Return 0 for success, -EBUSY if the release command ring is not ready.
+ */
+int qbman_swp_release_mem_back(struct qbman_swp *s,
+			       const struct qbman_release_desc *d,
+			       const u64 *buffers, unsigned int num_buffers)
+{
+	int i;
+	struct qbman_release_desc *p;
+	u32 rar;
+
+	if (!num_buffers || (num_buffers > 7))
+		return -EINVAL;
+
+	rar = qbman_read_register(s, QBMAN_CINH_SWP_RAR);
+	if (!RAR_SUCCESS(rar))
+		return -EBUSY;
+
+	/* Start the release command */
+	p = qbman_get_cmd(s, QBMAN_CENA_SWP_RCR_MEM(RAR_IDX(rar)));
+
+	/* Copy the caller's buffer pointers to the command */
+	for (i = 0; i < num_buffers; i++)
+		p->buf[i] = cpu_to_le64(buffers[i]);
+	p->bpid = d->bpid;
+
+	p->verb = d->verb | RAR_VB(rar) | num_buffers;
+	dma_wmb();
+	qbman_write_register(s, QBMAN_CINH_SWP_RCR_AM_RT +
+			     RAR_IDX(rar)  * 4, QMAN_RT_MODE);
 
 	return 0;
 }
diff --git a/drivers/soc/fsl/dpio/qbman-portal.h b/drivers/soc/fsl/dpio/qbman-portal.h
index f3ec5d2..c7c2225 100644
--- a/drivers/soc/fsl/dpio/qbman-portal.h
+++ b/drivers/soc/fsl/dpio/qbman-portal.h
@@ -9,6 +9,13 @@
 
 #include <soc/fsl/dpaa2-fd.h>
 
+#define QMAN_REV_4000   0x04000000
+#define QMAN_REV_4100   0x04010000
+#define QMAN_REV_4101   0x04010001
+#define QMAN_REV_5000   0x05000000
+
+#define QMAN_REV_MASK   0xffff0000
+
 struct dpaa2_dq;
 struct qbman_swp;
 
@@ -81,6 +88,10 @@ struct qbman_eq_desc {
 	u8 wae;
 	u8 rspid;
 	__le64 rsp_addr;
+};
+
+struct qbman_eq_desc_with_fd {
+	struct qbman_eq_desc desc;
 	u8 fd[32];
 };
 
@@ -132,8 +143,48 @@ struct qbman_swp {
 		u8 dqrr_size;
 		int reset_bug; /* indicates dqrr reset workaround is needed */
 	} dqrr;
+
+	struct {
+		u32 pi;
+		u32 pi_vb;
+		u32 pi_ring_size;
+		u32 pi_ci_mask;
+		u32 ci;
+		int available;
+		u32 pend;
+		u32 no_pfdr;
+	} eqcr;
+
+	spinlock_t access_spinlock;
 };
 
+/* Function pointers */
+extern
+int (*qbman_swp_enqueue_ptr)(struct qbman_swp *s,
+			     const struct qbman_eq_desc *d,
+			     const struct dpaa2_fd *fd);
+extern
+int (*qbman_swp_enqueue_multiple_ptr)(struct qbman_swp *s,
+				      const struct qbman_eq_desc *d,
+				      const struct dpaa2_fd *fd,
+				      uint32_t *flags,
+				      int num_frames);
+extern
+int (*qbman_swp_enqueue_multiple_desc_ptr)(struct qbman_swp *s,
+					   const struct qbman_eq_desc *d,
+					   const struct dpaa2_fd *fd,
+					   int num_frames);
+extern
+int (*qbman_swp_pull_ptr)(struct qbman_swp *s, struct qbman_pull_desc *d);
+extern
+const struct dpaa2_dq *(*qbman_swp_dqrr_next_ptr)(struct qbman_swp *s);
+extern
+int (*qbman_swp_release_ptr)(struct qbman_swp *s,
+			     const struct qbman_release_desc *d,
+			     const u64 *buffers,
+			     unsigned int num_buffers);
+
+/* Functions */
 struct qbman_swp *qbman_swp_init(const struct qbman_swp_desc *d);
 void qbman_swp_finish(struct qbman_swp *p);
 u32 qbman_swp_interrupt_read_status(struct qbman_swp *p);
@@ -158,9 +209,6 @@ void qbman_pull_desc_set_wq(struct qbman_pull_desc *d, u32 wqid,
 void qbman_pull_desc_set_channel(struct qbman_pull_desc *d, u32 chid,
 				 enum qbman_pull_type_e dct);
 
-int qbman_swp_pull(struct qbman_swp *p, struct qbman_pull_desc *d);
-
-const struct dpaa2_dq *qbman_swp_dqrr_next(struct qbman_swp *s);
 void qbman_swp_dqrr_consume(struct qbman_swp *s, const struct dpaa2_dq *dq);
 
 int qbman_result_has_new_result(struct qbman_swp *p, const struct dpaa2_dq *dq);
@@ -172,15 +220,11 @@ void qbman_eq_desc_set_fq(struct qbman_eq_desc *d, u32 fqid);
 void qbman_eq_desc_set_qd(struct qbman_eq_desc *d, u32 qdid,
 			  u32 qd_bin, u32 qd_prio);
 
-int qbman_swp_enqueue(struct qbman_swp *p, const struct qbman_eq_desc *d,
-		      const struct dpaa2_fd *fd);
 
 void qbman_release_desc_clear(struct qbman_release_desc *d);
 void qbman_release_desc_set_bpid(struct qbman_release_desc *d, u16 bpid);
 void qbman_release_desc_set_rcdi(struct qbman_release_desc *d, int enable);
 
-int qbman_swp_release(struct qbman_swp *s, const struct qbman_release_desc *d,
-		      const u64 *buffers, unsigned int num_buffers);
 int qbman_swp_acquire(struct qbman_swp *s, u16 bpid, u64 *buffers,
 		      unsigned int num_buffers);
 int qbman_swp_alt_fq_state(struct qbman_swp *s, u32 fqid,
@@ -194,6 +238,61 @@ void qbman_swp_mc_submit(struct qbman_swp *p, void *cmd, u8 cmd_verb);
 void *qbman_swp_mc_result(struct qbman_swp *p);
 
 /**
+ * qbman_swp_enqueue() - Issue an enqueue command
+ * @s:  the software portal used for enqueue
+ * @d:  the enqueue descriptor
+ * @fd: the frame descriptor to be enqueued
+ *
+ * Return 0 for successful enqueue, -EBUSY if the EQCR is not ready.
+ */
+static inline int
+qbman_swp_enqueue(struct qbman_swp *s, const struct qbman_eq_desc *d,
+		  const struct dpaa2_fd *fd)
+{
+	return qbman_swp_enqueue_ptr(s, d, fd);
+}
+
+/**
+ * qbman_swp_enqueue_multiple() - Issue a multi enqueue command
+ * using one enqueue descriptor
+ * @s:  the software portal used for enqueue
+ * @d:  the enqueue descriptor
+ * @fd: table pointer of frame descriptor table to be enqueued
+ * @flags: table pointer of QBMAN_ENQUEUE_FLAG_DCA flags, not used if NULL
+ * @num_frames: number of fd to be enqueued
+ *
+ * Return the number of fd enqueued, or a negative error number.
+ */
+static inline int
+qbman_swp_enqueue_multiple(struct qbman_swp *s,
+			   const struct qbman_eq_desc *d,
+			   const struct dpaa2_fd *fd,
+			   uint32_t *flags,
+			   int num_frames)
+{
+	return qbman_swp_enqueue_multiple_ptr(s, d, fd, flags, num_frames);
+}
+
+/**
+ * qbman_swp_enqueue_multiple_desc() - Issue a multi enqueue command
+ * using multiple enqueue descriptor
+ * @s:  the software portal used for enqueue
+ * @d:  table of minimal enqueue descriptor
+ * @fd: table pointer of frame descriptor table to be enqueued
+ * @num_frames: number of fd to be enqueued
+ *
+ * Return the number of fd enqueued, or a negative error number.
+ */
+static inline int
+qbman_swp_enqueue_multiple_desc(struct qbman_swp *s,
+				const struct qbman_eq_desc *d,
+				const struct dpaa2_fd *fd,
+				int num_frames)
+{
+	return qbman_swp_enqueue_multiple_desc_ptr(s, d, fd, num_frames);
+}
+
+/**
  * qbman_result_is_DQ() - check if the dequeue result is a dequeue response
  * @dq: the dequeue result to be checked
  *
@@ -504,4 +603,49 @@ int qbman_bp_query(struct qbman_swp *s, u16 bpid,
 
 u32 qbman_bp_info_num_free_bufs(struct qbman_bp_query_rslt *a);
 
+/**
+ * qbman_swp_release() - Issue a buffer release command
+ * @s:           the software portal object
+ * @d:           the release descriptor
+ * @buffers:     a pointer pointing to the buffer address to be released
+ * @num_buffers: number of buffers to be released,  must be less than 8
+ *
+ * Return 0 for success, -EBUSY if the release command ring is not ready.
+ */
+static inline int qbman_swp_release(struct qbman_swp *s,
+				    const struct qbman_release_desc *d,
+				    const u64 *buffers,
+				    unsigned int num_buffers)
+{
+	return qbman_swp_release_ptr(s, d, buffers, num_buffers);
+}
+
+/**
+ * qbman_swp_pull() - Issue the pull dequeue command
+ * @s: the software portal object
+ * @d: the software portal descriptor which has been configured with
+ *     the set of qbman_pull_desc_set_*() calls
+ *
+ * Return 0 for success, and -EBUSY if the software portal is not ready
+ * to do pull dequeue.
+ */
+static inline int qbman_swp_pull(struct qbman_swp *s,
+				 struct qbman_pull_desc *d)
+{
+	return qbman_swp_pull_ptr(s, d);
+}
+
+/**
+ * qbman_swp_dqrr_next() - Get an valid DQRR entry
+ * @s: the software portal object
+ *
+ * Return NULL if there are no unconsumed DQRR entries. Return a DQRR entry
+ * only once, so repeated calls can return a sequence of DQRR entries, without
+ * requiring they be consumed immediately or in any particular order.
+ */
+static inline const struct dpaa2_dq *qbman_swp_dqrr_next(struct qbman_swp *s)
+{
+	return qbman_swp_dqrr_next_ptr(s);
+}
+
 #endif /* __FSL_QBMAN_PORTAL_H */
diff --git a/drivers/soc/fsl/qe/qe.c b/drivers/soc/fsl/qe/qe.c
index 96c2057..4471468 100644
--- a/drivers/soc/fsl/qe/qe.c
+++ b/drivers/soc/fsl/qe/qe.c
@@ -423,7 +423,7 @@ static void qe_upload_microcode(const void *base,
 		qe_iowrite32be(be32_to_cpu(code[i]), &qe_immr->iram.idata);
 	
 	/* Set I-RAM Ready Register */
-	qe_iowrite32be(be32_to_cpu(QE_IRAM_READY), &qe_immr->iram.iready);
+	qe_iowrite32be(QE_IRAM_READY, &qe_immr->iram.iready);
 }
 
 /*
@@ -525,7 +525,7 @@ int qe_upload_firmware(const struct qe_firmware *firmware)
 	 */
 	memset(&qe_firmware_info, 0, sizeof(qe_firmware_info));
 	strlcpy(qe_firmware_info.id, firmware->id, sizeof(qe_firmware_info.id));
-	qe_firmware_info.extended_modes = firmware->extended_modes;
+	qe_firmware_info.extended_modes = be64_to_cpu(firmware->extended_modes);
 	memcpy(qe_firmware_info.vtraps, firmware->vtraps,
 		sizeof(firmware->vtraps));
 
diff --git a/drivers/soc/fsl/qe/qe_common.c b/drivers/soc/fsl/qe/qe_common.c
index a81a1a7..7507559 100644
--- a/drivers/soc/fsl/qe/qe_common.c
+++ b/drivers/soc/fsl/qe/qe_common.c
@@ -46,7 +46,7 @@ int cpm_muram_init(void)
 {
 	struct device_node *np;
 	struct resource r;
-	u32 zero[OF_MAX_ADDR_CELLS] = {};
+	__be32 zero[OF_MAX_ADDR_CELLS] = {};
 	resource_size_t max = 0;
 	int i = 0;
 	int ret = 0;
diff --git a/drivers/soc/fsl/qe/qe_ic.c b/drivers/soc/fsl/qe/qe_ic.c
index 0dd5bdb..0390af9 100644
--- a/drivers/soc/fsl/qe/qe_ic.c
+++ b/drivers/soc/fsl/qe/qe_ic.c
@@ -44,7 +44,7 @@
 
 struct qe_ic {
 	/* Control registers offset */
-	u32 __iomem *regs;
+	__be32 __iomem *regs;
 
 	/* The remapper for this QEIC */
 	struct irq_domain *irqhost;
diff --git a/drivers/soc/fsl/qe/ucc.c b/drivers/soc/fsl/qe/ucc.c
index 90157ac..d6c9397 100644
--- a/drivers/soc/fsl/qe/ucc.c
+++ b/drivers/soc/fsl/qe/ucc.c
@@ -632,7 +632,7 @@ int ucc_set_tdm_rxtx_sync(u32 tdm_num, enum qe_clock clock,
 {
 	int source;
 	u32 shift;
-	struct qe_mux *qe_mux_reg;
+	struct qe_mux __iomem *qe_mux_reg;
 
 	qe_mux_reg = &qe_immr->qmx;
 
diff --git a/drivers/soc/fsl/qe/ucc_slow.c b/drivers/soc/fsl/qe/ucc_slow.c
index 274d344..7e11be4 100644
--- a/drivers/soc/fsl/qe/ucc_slow.c
+++ b/drivers/soc/fsl/qe/ucc_slow.c
@@ -72,7 +72,7 @@ EXPORT_SYMBOL(ucc_slow_restart_tx);
 
 void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode)
 {
-	struct ucc_slow *us_regs;
+	struct ucc_slow __iomem *us_regs;
 	u32 gumr_l;
 
 	us_regs = uccs->us_regs;
@@ -93,7 +93,7 @@ EXPORT_SYMBOL(ucc_slow_enable);
 
 void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode)
 {
-	struct ucc_slow *us_regs;
+	struct ucc_slow __iomem *us_regs;
 	u32 gumr_l;
 
 	us_regs = uccs->us_regs;
@@ -122,7 +122,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
 	u32 i;
 	struct ucc_slow __iomem *us_regs;
 	u32 gumr;
-	struct qe_bd *bd;
+	struct qe_bd __iomem *bd;
 	u32 id;
 	u32 command;
 	int ret = 0;
@@ -168,16 +168,9 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
 		return -ENOMEM;
 	}
 
-	uccs->saved_uccm = 0;
-	uccs->p_rx_frame = 0;
 	us_regs = uccs->us_regs;
-	uccs->p_ucce = (u16 *) & (us_regs->ucce);
-	uccs->p_uccm = (u16 *) & (us_regs->uccm);
-#ifdef STATISTICS
-	uccs->rx_frames = 0;
-	uccs->tx_frames = 0;
-	uccs->rx_discarded = 0;
-#endif				/* STATISTICS */
+	uccs->p_ucce = &us_regs->ucce;
+	uccs->p_uccm = &us_regs->uccm;
 
 	/* Get PRAM base */
 	uccs->us_pram_offset =
@@ -231,24 +224,24 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
 		/* clear bd buffer */
 		qe_iowrite32be(0, &bd->buf);
 		/* set bd status and length */
-		qe_iowrite32be(0, (u32 *)bd);
+		qe_iowrite32be(0, (u32 __iomem *)bd);
 		bd++;
 	}
 	/* for last BD set Wrap bit */
 	qe_iowrite32be(0, &bd->buf);
-	qe_iowrite32be(cpu_to_be32(T_W), (u32 *)bd);
+	qe_iowrite32be(T_W, (u32 __iomem *)bd);
 
 	/* Init Rx bds */
 	bd = uccs->rx_bd = qe_muram_addr(uccs->rx_base_offset);
 	for (i = 0; i < us_info->rx_bd_ring_len - 1; i++) {
 		/* set bd status and length */
-		qe_iowrite32be(0, (u32 *)bd);
+		qe_iowrite32be(0, (u32 __iomem *)bd);
 		/* clear bd buffer */
 		qe_iowrite32be(0, &bd->buf);
 		bd++;
 	}
 	/* for last BD set Wrap bit */
-	qe_iowrite32be(cpu_to_be32(R_W), (u32 *)bd);
+	qe_iowrite32be(R_W, (u32 __iomem *)bd);
 	qe_iowrite32be(0, &bd->buf);
 
 	/* Set GUMR (For more details see the hardware spec.). */
@@ -273,8 +266,8 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
 	qe_iowrite32be(gumr, &us_regs->gumr_h);
 
 	/* gumr_l */
-	gumr = us_info->tdcr | us_info->rdcr | us_info->tenc | us_info->renc |
-		us_info->diag | us_info->mode;
+	gumr = (u32)us_info->tdcr | (u32)us_info->rdcr | (u32)us_info->tenc |
+	       (u32)us_info->renc | (u32)us_info->diag | (u32)us_info->mode;
 	if (us_info->tci)
 		gumr |= UCC_SLOW_GUMR_L_TCI;
 	if (us_info->rinv)
@@ -289,8 +282,8 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
 
 	/* if the data is in cachable memory, the 'global' */
 	/* in the function code should be set. */
-	uccs->us_pram->tbmr = UCC_BMR_BO_BE;
-	uccs->us_pram->rbmr = UCC_BMR_BO_BE;
+	qe_iowrite8(UCC_BMR_BO_BE, &uccs->us_pram->tbmr);
+	qe_iowrite8(UCC_BMR_BO_BE, &uccs->us_pram->rbmr);
 
 	/* rbase, tbase are offsets from MURAM base */
 	qe_iowrite16be(uccs->rx_base_offset, &uccs->us_pram->rbase);
diff --git a/drivers/soc/imx/Kconfig b/drivers/soc/imx/Kconfig
index 0281ef9..67aa94b 100644
--- a/drivers/soc/imx/Kconfig
+++ b/drivers/soc/imx/Kconfig
@@ -10,11 +10,20 @@
 
 config IMX_SCU_SOC
 	bool "i.MX System Controller Unit SoC info support"
-	depends on IMX_SCU || COMPILE_TEST
+	depends on IMX_SCU
 	select SOC_BUS
 	help
 	  If you say yes here you get support for the NXP i.MX System
 	  Controller Unit SoC info module, it will provide the SoC info
 	  like SoC family, ID and revision etc.
 
+config SOC_IMX8M
+	bool "i.MX8M SoC family support"
+	depends on ARCH_MXC || COMPILE_TEST
+	default ARCH_MXC && ARM64
+	help
+	  If you say yes here you get support for the NXP i.MX8M family
+	  support, it will provide the SoC info like SoC family,
+	  ID and revision etc.
+
 endmenu
diff --git a/drivers/soc/imx/Makefile b/drivers/soc/imx/Makefile
index cf9ca42..103e2c9 100644
--- a/drivers/soc/imx/Makefile
+++ b/drivers/soc/imx/Makefile
@@ -1,5 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0-only
 obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
 obj-$(CONFIG_IMX_GPCV2_PM_DOMAINS) += gpcv2.o
-obj-$(CONFIG_ARCH_MXC) += soc-imx8.o
+obj-$(CONFIG_SOC_IMX8M) += soc-imx8m.o
 obj-$(CONFIG_IMX_SCU_SOC) += soc-imx-scu.o
diff --git a/drivers/soc/imx/gpc.c b/drivers/soc/imx/gpc.c
index 98b9d9a..90a8b2c 100644
--- a/drivers/soc/imx/gpc.c
+++ b/drivers/soc/imx/gpc.c
@@ -87,8 +87,8 @@ static int imx6_pm_domain_power_off(struct generic_pm_domain *genpd)
 static int imx6_pm_domain_power_on(struct generic_pm_domain *genpd)
 {
 	struct imx_pm_domain *pd = to_imx_pm_domain(genpd);
-	int i, ret, sw, sw2iso;
-	u32 val;
+	int i, ret;
+	u32 val, req;
 
 	if (pd->supply) {
 		ret = regulator_enable(pd->supply);
@@ -107,17 +107,18 @@ static int imx6_pm_domain_power_on(struct generic_pm_domain *genpd)
 	regmap_update_bits(pd->regmap, pd->reg_offs + GPC_PGC_CTRL_OFFS,
 			   0x1, 0x1);
 
-	/* Read ISO and ISO2SW power up delays */
-	regmap_read(pd->regmap, pd->reg_offs + GPC_PGC_PUPSCR_OFFS, &val);
-	sw = val & 0x3f;
-	sw2iso = (val >> 8) & 0x3f;
-
 	/* Request GPC to power up domain */
-	val = BIT(pd->cntr_pdn_bit + 1);
-	regmap_update_bits(pd->regmap, GPC_CNTR, val, val);
+	req = BIT(pd->cntr_pdn_bit + 1);
+	regmap_update_bits(pd->regmap, GPC_CNTR, req, req);
 
-	/* Wait ISO + ISO2SW IPG clock cycles */
-	udelay(DIV_ROUND_UP(sw + sw2iso, pd->ipg_rate_mhz));
+	/* Wait for the PGC to handle the request */
+	ret = regmap_read_poll_timeout(pd->regmap, GPC_CNTR, val, !(val & req),
+				       1, 50);
+	if (ret)
+		pr_err("powerup request on domain %s timed out\n", genpd->name);
+
+	/* Wait for reset to propagate through peripherals */
+	usleep_range(5, 10);
 
 	/* Disable reset clocks for all devices in the domain */
 	for (i = 0; i < pd->num_clks; i++)
@@ -343,6 +344,7 @@ static const struct regmap_config imx_gpc_regmap_config = {
 	.rd_table = &access_table,
 	.wr_table = &access_table,
 	.max_register = 0x2ac,
+	.fast_io = true,
 };
 
 static struct generic_pm_domain *imx_gpc_onecell_domains[] = {
diff --git a/drivers/soc/imx/gpcv2.c b/drivers/soc/imx/gpcv2.c
index b0dffb0..6cf8a7a 100644
--- a/drivers/soc/imx/gpcv2.c
+++ b/drivers/soc/imx/gpcv2.c
@@ -14,6 +14,7 @@
 #include <linux/pm_domain.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
+#include <linux/sizes.h>
 #include <dt-bindings/power/imx7-power.h>
 #include <dt-bindings/power/imx8mq-power.h>
 
diff --git a/drivers/soc/imx/soc-imx8.c b/drivers/soc/imx/soc-imx8m.c
similarity index 100%
rename from drivers/soc/imx/soc-imx8.c
rename to drivers/soc/imx/soc-imx8m.c
diff --git a/drivers/soc/kendryte/Kconfig b/drivers/soc/kendryte/Kconfig
new file mode 100644
index 0000000..49785b1b
--- /dev/null
+++ b/drivers/soc/kendryte/Kconfig
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0
+
+if SOC_KENDRYTE
+
+config K210_SYSCTL
+	bool "Kendryte K210 system controller"
+	default y
+	depends on RISCV
+	help
+	  Enables controlling the K210 various clocks and to enable
+	  general purpose use of the extra 2MB of SRAM normally
+	  reserved for the AI engine.
+
+endif
diff --git a/drivers/soc/kendryte/Makefile b/drivers/soc/kendryte/Makefile
new file mode 100644
index 0000000..002d9ce
--- /dev/null
+++ b/drivers/soc/kendryte/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_K210_SYSCTL)	+= k210-sysctl.o
diff --git a/drivers/soc/kendryte/k210-sysctl.c b/drivers/soc/kendryte/k210-sysctl.c
new file mode 100644
index 0000000..4608fbc
--- /dev/null
+++ b/drivers/soc/kendryte/k210-sysctl.c
@@ -0,0 +1,248 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2019 Christoph Hellwig.
+ * Copyright (c) 2019 Western Digital Corporation or its affiliates.
+ */
+#include <linux/types.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/bitfield.h>
+#include <asm/soc.h>
+
+#define K210_SYSCTL_CLK0_FREQ		26000000UL
+
+/* Registers base address */
+#define K210_SYSCTL_SYSCTL_BASE_ADDR	0x50440000ULL
+
+/* Registers */
+#define K210_SYSCTL_PLL0		0x08
+#define K210_SYSCTL_PLL1		0x0c
+/* clkr: 4bits, clkf1: 6bits, clkod: 4bits, bwadj: 4bits */
+#define   PLL_RESET		(1 << 20)
+#define   PLL_PWR		(1 << 21)
+#define   PLL_INTFB		(1 << 22)
+#define   PLL_BYPASS		(1 << 23)
+#define   PLL_TEST		(1 << 24)
+#define   PLL_OUT_EN		(1 << 25)
+#define   PLL_TEST_EN		(1 << 26)
+#define K210_SYSCTL_PLL_LOCK		0x18
+#define   PLL0_LOCK1		(1 << 0)
+#define   PLL0_LOCK2		(1 << 1)
+#define   PLL0_SLIP_CLEAR	(1 << 2)
+#define   PLL0_TEST_CLK_OUT	(1 << 3)
+#define   PLL1_LOCK1		(1 << 8)
+#define   PLL1_LOCK2		(1 << 9)
+#define   PLL1_SLIP_CLEAR	(1 << 10)
+#define   PLL1_TEST_CLK_OUT	(1 << 11)
+#define   PLL2_LOCK1		(1 << 16)
+#define   PLL2_LOCK2		(1 << 16)
+#define   PLL2_SLIP_CLEAR	(1 << 18)
+#define   PLL2_TEST_CLK_OUT	(1 << 19)
+#define K210_SYSCTL_CLKSEL0	0x20
+#define   CLKSEL_ACLK		(1 << 0)
+#define K210_SYSCTL_CLKEN_CENT		0x28
+#define   CLKEN_CPU		(1 << 0)
+#define   CLKEN_SRAM0		(1 << 1)
+#define   CLKEN_SRAM1		(1 << 2)
+#define   CLKEN_APB0		(1 << 3)
+#define   CLKEN_APB1		(1 << 4)
+#define   CLKEN_APB2		(1 << 5)
+#define K210_SYSCTL_CLKEN_PERI		0x2c
+#define   CLKEN_ROM		(1 << 0)
+#define   CLKEN_DMA		(1 << 1)
+#define   CLKEN_AI		(1 << 2)
+#define   CLKEN_DVP		(1 << 3)
+#define   CLKEN_FFT		(1 << 4)
+#define   CLKEN_GPIO		(1 << 5)
+#define   CLKEN_SPI0		(1 << 6)
+#define   CLKEN_SPI1		(1 << 7)
+#define   CLKEN_SPI2		(1 << 8)
+#define   CLKEN_SPI3		(1 << 9)
+#define   CLKEN_I2S0		(1 << 10)
+#define   CLKEN_I2S1		(1 << 11)
+#define   CLKEN_I2S2		(1 << 12)
+#define   CLKEN_I2C0		(1 << 13)
+#define   CLKEN_I2C1		(1 << 14)
+#define   CLKEN_I2C2		(1 << 15)
+#define   CLKEN_UART1		(1 << 16)
+#define   CLKEN_UART2		(1 << 17)
+#define   CLKEN_UART3		(1 << 18)
+#define   CLKEN_AES		(1 << 19)
+#define   CLKEN_FPIO		(1 << 20)
+#define   CLKEN_TIMER0		(1 << 21)
+#define   CLKEN_TIMER1		(1 << 22)
+#define   CLKEN_TIMER2		(1 << 23)
+#define   CLKEN_WDT0		(1 << 24)
+#define   CLKEN_WDT1		(1 << 25)
+#define   CLKEN_SHA		(1 << 26)
+#define   CLKEN_OTP		(1 << 27)
+#define   CLKEN_RTC		(1 << 29)
+
+struct k210_sysctl {
+	void __iomem		*regs;
+	struct clk_hw		hw;
+};
+
+static void k210_set_bits(u32 val, void __iomem *reg)
+{
+	writel(readl(reg) | val, reg);
+}
+
+static void k210_clear_bits(u32 val, void __iomem *reg)
+{
+	writel(readl(reg) & ~val, reg);
+}
+
+static void k210_pll1_enable(void __iomem *regs)
+{
+	u32 val;
+
+	val = readl(regs + K210_SYSCTL_PLL1);
+	val &= ~GENMASK(19, 0);				/* clkr1 = 0 */
+	val |= FIELD_PREP(GENMASK(9, 4), 0x3B);		/* clkf1 = 59 */
+	val |= FIELD_PREP(GENMASK(13, 10), 0x3);	/* clkod1 = 3 */
+	val |= FIELD_PREP(GENMASK(19, 14), 0x3B);	/* bwadj1 = 59 */
+	writel(val, regs + K210_SYSCTL_PLL1);
+
+	k210_clear_bits(PLL_BYPASS, regs + K210_SYSCTL_PLL1);
+	k210_set_bits(PLL_PWR, regs + K210_SYSCTL_PLL1);
+
+	/*
+	 * Reset the pll. The magic NOPs come from the Kendryte reference SDK.
+	 */
+	k210_clear_bits(PLL_RESET, regs + K210_SYSCTL_PLL1);
+	k210_set_bits(PLL_RESET, regs + K210_SYSCTL_PLL1);
+	nop();
+	nop();
+	k210_clear_bits(PLL_RESET, regs + K210_SYSCTL_PLL1);
+
+	for (;;) {
+		val = readl(regs + K210_SYSCTL_PLL_LOCK);
+		if (val & PLL1_LOCK2)
+			break;
+		writel(val | PLL1_SLIP_CLEAR, regs + K210_SYSCTL_PLL_LOCK);
+	}
+
+	k210_set_bits(PLL_OUT_EN, regs + K210_SYSCTL_PLL1);
+}
+
+static unsigned long k210_sysctl_clk_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct k210_sysctl *s = container_of(hw, struct k210_sysctl, hw);
+	u32 clksel0, pll0;
+	u64 pll0_freq, clkr0, clkf0, clkod0;
+
+	/*
+	 * If the clock selector is not set, use the base frequency.
+	 * Otherwise, use PLL0 frequency with a frequency divisor.
+	 */
+	clksel0 = readl(s->regs + K210_SYSCTL_CLKSEL0);
+	if (!(clksel0 & CLKSEL_ACLK))
+		return K210_SYSCTL_CLK0_FREQ;
+
+	/*
+	 * Get PLL0 frequency:
+	 * freq = base frequency * clkf0 / (clkr0 * clkod0)
+	 */
+	pll0 = readl(s->regs + K210_SYSCTL_PLL0);
+	clkr0 = 1 + FIELD_GET(GENMASK(3, 0), pll0);
+	clkf0 = 1 + FIELD_GET(GENMASK(9, 4), pll0);
+	clkod0 = 1 + FIELD_GET(GENMASK(13, 10), pll0);
+	pll0_freq = clkf0 * K210_SYSCTL_CLK0_FREQ / (clkr0 * clkod0);
+
+	/* Get the frequency divisor from the clock selector */
+	return pll0_freq / (2ULL << FIELD_GET(0x00000006, clksel0));
+}
+
+static const struct clk_ops k210_sysctl_clk_ops = {
+	.recalc_rate	= k210_sysctl_clk_recalc_rate,
+};
+
+static const struct clk_init_data k210_clk_init_data = {
+	.name		= "k210-sysctl-pll1",
+	.ops		= &k210_sysctl_clk_ops,
+};
+
+static int k210_sysctl_probe(struct platform_device *pdev)
+{
+	struct k210_sysctl *s;
+	int error;
+
+	pr_info("Kendryte K210 SoC sysctl\n");
+
+	s = devm_kzalloc(&pdev->dev, sizeof(*s), GFP_KERNEL);
+	if (!s)
+		return -ENOMEM;
+
+	s->regs = devm_ioremap_resource(&pdev->dev,
+			platform_get_resource(pdev, IORESOURCE_MEM, 0));
+	if (IS_ERR(s->regs))
+		return PTR_ERR(s->regs);
+
+	s->hw.init = &k210_clk_init_data;
+	error = devm_clk_hw_register(&pdev->dev, &s->hw);
+	if (error) {
+		dev_err(&pdev->dev, "failed to register clk");
+		return error;
+	}
+
+	error = devm_of_clk_add_hw_provider(&pdev->dev, of_clk_hw_simple_get,
+					    &s->hw);
+	if (error) {
+		dev_err(&pdev->dev, "adding clk provider failed\n");
+		return error;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id k210_sysctl_of_match[] = {
+	{ .compatible = "kendryte,k210-sysctl", },
+	{}
+};
+
+static struct platform_driver k210_sysctl_driver = {
+	.driver	= {
+		.name		= "k210-sysctl",
+		.of_match_table	= k210_sysctl_of_match,
+	},
+	.probe			= k210_sysctl_probe,
+};
+
+static int __init k210_sysctl_init(void)
+{
+	return platform_driver_register(&k210_sysctl_driver);
+}
+core_initcall(k210_sysctl_init);
+
+/*
+ * This needs to be called very early during initialization, given that
+ * PLL1 needs to be enabled to be able to use all SRAM.
+ */
+static void __init k210_soc_early_init(const void *fdt)
+{
+	void __iomem *regs;
+
+	regs = ioremap(K210_SYSCTL_SYSCTL_BASE_ADDR, 0x1000);
+	if (!regs)
+		panic("K210 sysctl ioremap");
+
+	/* Enable PLL1 to make the KPU SRAM useable */
+	k210_pll1_enable(regs);
+
+	k210_set_bits(PLL_OUT_EN, regs + K210_SYSCTL_PLL0);
+
+	k210_set_bits(CLKEN_CPU | CLKEN_SRAM0 | CLKEN_SRAM1,
+		      regs + K210_SYSCTL_CLKEN_CENT);
+	k210_set_bits(CLKEN_ROM | CLKEN_TIMER0 | CLKEN_RTC,
+		      regs + K210_SYSCTL_CLKEN_PERI);
+
+	k210_set_bits(CLKSEL_ACLK, regs + K210_SYSCTL_CLKSEL0);
+
+	iounmap(regs);
+}
+SOC_EARLY_INIT_DECLARE(generic_k210, "kendryte,k210", k210_soc_early_init);
diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index de20e6c..db37144 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -78,6 +78,7 @@ struct cmdq_client *cmdq_mbox_create(struct device *dev, int index, u32 timeout)
 	client->pkt_cnt = 0;
 	client->client.dev = dev;
 	client->client.tx_block = false;
+	client->client.knows_txdone = true;
 	client->chan = mbox_request_channel(&client->client, index);
 
 	if (IS_ERR(client->chan)) {
diff --git a/drivers/soc/mediatek/mtk-pmic-wrap.c b/drivers/soc/mediatek/mtk-pmic-wrap.c
index c725315..5d34e8b 100644
--- a/drivers/soc/mediatek/mtk-pmic-wrap.c
+++ b/drivers/soc/mediatek/mtk-pmic-wrap.c
@@ -111,6 +111,28 @@ enum dew_regs {
 	PWRAP_RG_SPI_CON13,
 	PWRAP_SPISLV_KEY,
 
+	/* MT6359 only regs */
+	PWRAP_DEW_CRC_SWRST,
+	PWRAP_DEW_RG_EN_RECORD,
+	PWRAP_DEW_RECORD_CMD0,
+	PWRAP_DEW_RECORD_CMD1,
+	PWRAP_DEW_RECORD_CMD2,
+	PWRAP_DEW_RECORD_CMD3,
+	PWRAP_DEW_RECORD_CMD4,
+	PWRAP_DEW_RECORD_CMD5,
+	PWRAP_DEW_RECORD_WDATA0,
+	PWRAP_DEW_RECORD_WDATA1,
+	PWRAP_DEW_RECORD_WDATA2,
+	PWRAP_DEW_RECORD_WDATA3,
+	PWRAP_DEW_RECORD_WDATA4,
+	PWRAP_DEW_RECORD_WDATA5,
+	PWRAP_DEW_RG_ADDR_TARGET,
+	PWRAP_DEW_RG_ADDR_MASK,
+	PWRAP_DEW_RG_WDATA_TARGET,
+	PWRAP_DEW_RG_WDATA_MASK,
+	PWRAP_DEW_RG_SPI_RECORD_CLR,
+	PWRAP_DEW_RG_CMD_ALERT_CLR,
+
 	/* MT6397 only regs */
 	PWRAP_DEW_EVENT_OUT_EN,
 	PWRAP_DEW_EVENT_SRC_EN,
@@ -197,6 +219,42 @@ static const u32 mt6358_regs[] = {
 	[PWRAP_SPISLV_KEY] =		0x044a,
 };
 
+static const u32 mt6359_regs[] = {
+	[PWRAP_DEW_RG_EN_RECORD] =	0x040a,
+	[PWRAP_DEW_DIO_EN] =		0x040c,
+	[PWRAP_DEW_READ_TEST] =		0x040e,
+	[PWRAP_DEW_WRITE_TEST] =	0x0410,
+	[PWRAP_DEW_CRC_SWRST] =		0x0412,
+	[PWRAP_DEW_CRC_EN] =		0x0414,
+	[PWRAP_DEW_CRC_VAL] =		0x0416,
+	[PWRAP_DEW_CIPHER_KEY_SEL] =	0x0418,
+	[PWRAP_DEW_CIPHER_IV_SEL] =	0x041a,
+	[PWRAP_DEW_CIPHER_EN] =		0x041c,
+	[PWRAP_DEW_CIPHER_RDY] =	0x041e,
+	[PWRAP_DEW_CIPHER_MODE] =	0x0420,
+	[PWRAP_DEW_CIPHER_SWRST] =	0x0422,
+	[PWRAP_DEW_RDDMY_NO] =		0x0424,
+	[PWRAP_DEW_RECORD_CMD0] =	0x0428,
+	[PWRAP_DEW_RECORD_CMD1] =	0x042a,
+	[PWRAP_DEW_RECORD_CMD2] =	0x042c,
+	[PWRAP_DEW_RECORD_CMD3] =	0x042e,
+	[PWRAP_DEW_RECORD_CMD4] =	0x0430,
+	[PWRAP_DEW_RECORD_CMD5] =	0x0432,
+	[PWRAP_DEW_RECORD_WDATA0] =	0x0434,
+	[PWRAP_DEW_RECORD_WDATA1] =	0x0436,
+	[PWRAP_DEW_RECORD_WDATA2] =	0x0438,
+	[PWRAP_DEW_RECORD_WDATA3] =	0x043a,
+	[PWRAP_DEW_RECORD_WDATA4] =	0x043c,
+	[PWRAP_DEW_RECORD_WDATA5] =	0x043e,
+	[PWRAP_DEW_RG_ADDR_TARGET] =	0x0440,
+	[PWRAP_DEW_RG_ADDR_MASK] =	0x0442,
+	[PWRAP_DEW_RG_WDATA_TARGET] =	0x0444,
+	[PWRAP_DEW_RG_WDATA_MASK] =	0x0446,
+	[PWRAP_DEW_RG_SPI_RECORD_CLR] =	0x0448,
+	[PWRAP_DEW_RG_CMD_ALERT_CLR] =	0x0448,
+	[PWRAP_SPISLV_KEY] =		0x044a,
+};
+
 static const u32 mt6397_regs[] = {
 	[PWRAP_DEW_BASE] =		0xbc00,
 	[PWRAP_DEW_EVENT_OUT_EN] =	0xbc00,
@@ -497,6 +555,45 @@ static int mt6765_regs[] = {
 	[PWRAP_DCM_DBC_PRD] =		0x1E0,
 };
 
+static int mt6779_regs[] = {
+	[PWRAP_MUX_SEL] =		0x0,
+	[PWRAP_WRAP_EN] =		0x4,
+	[PWRAP_DIO_EN] =		0x8,
+	[PWRAP_RDDMY] =			0x20,
+	[PWRAP_CSHEXT_WRITE] =		0x24,
+	[PWRAP_CSHEXT_READ] =		0x28,
+	[PWRAP_CSLEXT_WRITE] =		0x2C,
+	[PWRAP_CSLEXT_READ] =		0x30,
+	[PWRAP_EXT_CK_WRITE] =		0x34,
+	[PWRAP_STAUPD_CTRL] =		0x3C,
+	[PWRAP_STAUPD_GRPEN] =		0x40,
+	[PWRAP_EINT_STA0_ADR] =		0x44,
+	[PWRAP_HARB_HPRIO] =		0x68,
+	[PWRAP_HIPRIO_ARB_EN] =		0x6C,
+	[PWRAP_MAN_EN] =		0x7C,
+	[PWRAP_MAN_CMD] =		0x80,
+	[PWRAP_WACS0_EN] =		0x8C,
+	[PWRAP_INIT_DONE0] =		0x90,
+	[PWRAP_WACS1_EN] =		0x94,
+	[PWRAP_WACS2_EN] =		0x9C,
+	[PWRAP_INIT_DONE1] =		0x98,
+	[PWRAP_INIT_DONE2] =		0xA0,
+	[PWRAP_INT_EN] =		0xBC,
+	[PWRAP_INT_FLG_RAW] =		0xC0,
+	[PWRAP_INT_FLG] =		0xC4,
+	[PWRAP_INT_CLR] =		0xC8,
+	[PWRAP_INT1_EN] =		0xCC,
+	[PWRAP_INT1_FLG] =		0xD4,
+	[PWRAP_INT1_CLR] =		0xD8,
+	[PWRAP_TIMER_EN] =		0xF0,
+	[PWRAP_WDT_UNIT] =		0xF8,
+	[PWRAP_WDT_SRC_EN] =		0xFC,
+	[PWRAP_WDT_SRC_EN_1] =		0x100,
+	[PWRAP_WACS2_CMD] =		0xC20,
+	[PWRAP_WACS2_RDATA] =		0xC24,
+	[PWRAP_WACS2_VLDCLR] =		0xC28,
+};
+
 static int mt6797_regs[] = {
 	[PWRAP_MUX_SEL] =		0x0,
 	[PWRAP_WRAP_EN] =		0x4,
@@ -938,6 +1035,7 @@ enum pmic_type {
 	PMIC_MT6351,
 	PMIC_MT6357,
 	PMIC_MT6358,
+	PMIC_MT6359,
 	PMIC_MT6380,
 	PMIC_MT6397,
 };
@@ -945,6 +1043,7 @@ enum pmic_type {
 enum pwrap_type {
 	PWRAP_MT2701,
 	PWRAP_MT6765,
+	PWRAP_MT6779,
 	PWRAP_MT6797,
 	PWRAP_MT7622,
 	PWRAP_MT8135,
@@ -1377,6 +1476,7 @@ static int pwrap_init_cipher(struct pmic_wrapper *wrp)
 		break;
 	case PWRAP_MT2701:
 	case PWRAP_MT6765:
+	case PWRAP_MT6779:
 	case PWRAP_MT6797:
 	case PWRAP_MT8173:
 	case PWRAP_MT8516:
@@ -1711,6 +1811,15 @@ static const struct pwrap_slv_type pmic_mt6358 = {
 	.pwrap_write = pwrap_write16,
 };
 
+static const struct pwrap_slv_type pmic_mt6359 = {
+	.dew_regs = mt6359_regs,
+	.type = PMIC_MT6359,
+	.regmap = &pwrap_regmap_config16,
+	.caps = PWRAP_SLV_CAP_DUALIO,
+	.pwrap_read = pwrap_read16,
+	.pwrap_write = pwrap_write16,
+};
+
 static const struct pwrap_slv_type pmic_mt6380 = {
 	.dew_regs = NULL,
 	.type = PMIC_MT6380,
@@ -1744,6 +1853,9 @@ static const struct of_device_id of_slave_match_tbl[] = {
 		.compatible = "mediatek,mt6358",
 		.data = &pmic_mt6358,
 	}, {
+		.compatible = "mediatek,mt6359",
+		.data = &pmic_mt6359,
+	}, {
 		/* The MT6380 PMIC only implements a regulator, so we bind it
 		 * directly instead of using a MFD.
 		 */
@@ -1783,6 +1895,19 @@ static const struct pmic_wrapper_type pwrap_mt6765 = {
 	.init_soc_specific = NULL,
 };
 
+static const struct pmic_wrapper_type pwrap_mt6779 = {
+	.regs = mt6779_regs,
+	.type = PWRAP_MT6779,
+	.arb_en_all = 0xfbb7f,
+	.int_en_all = 0xfffffffe,
+	.int1_en_all = 0,
+	.spi_w = PWRAP_MAN_CMD_SPI_WRITE,
+	.wdt_src = PWRAP_WDT_SRC_MASK_ALL,
+	.caps = 0,
+	.init_reg_clock = pwrap_common_init_reg_clock,
+	.init_soc_specific = NULL,
+};
+
 static const struct pmic_wrapper_type pwrap_mt6797 = {
 	.regs = mt6797_regs,
 	.type = PWRAP_MT6797,
@@ -1868,6 +1993,9 @@ static const struct of_device_id of_pwrap_match_tbl[] = {
 		.compatible = "mediatek,mt6765-pwrap",
 		.data = &pwrap_mt6765,
 	}, {
+		.compatible = "mediatek,mt6779-pwrap",
+		.data = &pwrap_mt6779,
+	}, {
 		.compatible = "mediatek,mt6797-pwrap",
 		.data = &pwrap_mt6797,
 	}, {
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index d0a73e7..bf42a17 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -76,6 +76,10 @@
 	  requirements. This is typically used by the GPU, camera/video, and
 	  audio components on some Snapdragon SoCs.
 
+config QCOM_PDR_HELPERS
+	tristate
+	select QCOM_QMI_HELPERS
+
 config QCOM_PM
 	bool "Qualcomm Power Management"
 	depends on ARCH_QCOM && !ARM64
@@ -88,7 +92,6 @@
 
 config QCOM_QMI_HELPERS
 	tristate
-	depends on ARCH_QCOM || COMPILE_TEST
 	depends on NET
 
 config QCOM_RMTFS_MEM
@@ -197,6 +200,8 @@
 	tristate "Qualcomm APR Bus (Asynchronous Packet Router)"
 	depends on ARCH_QCOM || COMPILE_TEST
 	depends on RPMSG
+	depends on NET
+	select QCOM_PDR_HELPERS
 	help
 	  Enable APR IPC protocol support between
 	  application processor and QDSP6. APR is
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index 9fb35c8..5d6b83d 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -7,6 +7,7 @@
 obj-$(CONFIG_QCOM_GSBI)	+=	qcom_gsbi.o
 obj-$(CONFIG_QCOM_MDT_LOADER)	+= mdt_loader.o
 obj-$(CONFIG_QCOM_OCMEM)	+= ocmem.o
+obj-$(CONFIG_QCOM_PDR_HELPERS)	+= pdr_interface.o
 obj-$(CONFIG_QCOM_PM)	+=	spm.o
 obj-$(CONFIG_QCOM_QMI_HELPERS)	+= qmi_helpers.o
 qmi_helpers-y	+= qmi_encdec.o qmi_interface.o
diff --git a/drivers/soc/qcom/apr.c b/drivers/soc/qcom/apr.c
index 4fcc324..1f35b09 100644
--- a/drivers/soc/qcom/apr.c
+++ b/drivers/soc/qcom/apr.c
@@ -11,6 +11,7 @@
 #include <linux/workqueue.h>
 #include <linux/of_device.h>
 #include <linux/soc/qcom/apr.h>
+#include <linux/soc/qcom/pdr.h>
 #include <linux/rpmsg.h>
 #include <linux/of.h>
 
@@ -21,6 +22,7 @@ struct apr {
 	spinlock_t rx_lock;
 	struct idr svcs_idr;
 	int dest_domain_id;
+	struct pdr_handle *pdr;
 	struct workqueue_struct *rxwq;
 	struct work_struct rx_work;
 	struct list_head rx_list;
@@ -289,6 +291,9 @@ static int apr_add_device(struct device *dev, struct device_node *np,
 		  id->svc_id + 1, GFP_ATOMIC);
 	spin_unlock(&apr->svcs_lock);
 
+	of_property_read_string_index(np, "qcom,protection-domain",
+				      1, &adev->service_path);
+
 	dev_info(dev, "Adding APR dev: %s\n", dev_name(&adev->dev));
 
 	ret = device_register(&adev->dev);
@@ -300,14 +305,75 @@ static int apr_add_device(struct device *dev, struct device_node *np,
 	return ret;
 }
 
-static void of_register_apr_devices(struct device *dev)
+static int of_apr_add_pd_lookups(struct device *dev)
+{
+	const char *service_name, *service_path;
+	struct apr *apr = dev_get_drvdata(dev);
+	struct device_node *node;
+	struct pdr_service *pds;
+	int ret;
+
+	for_each_child_of_node(dev->of_node, node) {
+		ret = of_property_read_string_index(node, "qcom,protection-domain",
+						    0, &service_name);
+		if (ret < 0)
+			continue;
+
+		ret = of_property_read_string_index(node, "qcom,protection-domain",
+						    1, &service_path);
+		if (ret < 0) {
+			dev_err(dev, "pdr service path missing: %d\n", ret);
+			return ret;
+		}
+
+		pds = pdr_add_lookup(apr->pdr, service_name, service_path);
+		if (IS_ERR(pds) && PTR_ERR(pds) != -EALREADY) {
+			dev_err(dev, "pdr add lookup failed: %d\n", ret);
+			return PTR_ERR(pds);
+		}
+	}
+
+	return 0;
+}
+
+static void of_register_apr_devices(struct device *dev, const char *svc_path)
 {
 	struct apr *apr = dev_get_drvdata(dev);
 	struct device_node *node;
+	const char *service_path;
+	int ret;
 
 	for_each_child_of_node(dev->of_node, node) {
 		struct apr_device_id id = { {0} };
 
+		/*
+		 * This function is called with svc_path NULL during
+		 * apr_probe(), in which case we register any apr devices
+		 * without a qcom,protection-domain specified.
+		 *
+		 * Then as the protection domains becomes available
+		 * (if applicable) this function is again called, but with
+		 * svc_path representing the service becoming available. In
+		 * this case we register any apr devices with a matching
+		 * qcom,protection-domain.
+		 */
+
+		ret = of_property_read_string_index(node, "qcom,protection-domain",
+						    1, &service_path);
+		if (svc_path) {
+			/* skip APR services that are PD independent */
+			if (ret)
+				continue;
+
+			/* skip APR services whose PD paths don't match */
+			if (strcmp(service_path, svc_path))
+				continue;
+		} else {
+			/* skip APR services whose PD lookups are registered */
+			if (ret == 0)
+				continue;
+		}
+
 		if (of_property_read_u32(node, "reg", &id.svc_id))
 			continue;
 
@@ -318,6 +384,34 @@ static void of_register_apr_devices(struct device *dev)
 	}
 }
 
+static int apr_remove_device(struct device *dev, void *svc_path)
+{
+	struct apr_device *adev = to_apr_device(dev);
+
+	if (svc_path && adev->service_path) {
+		if (!strcmp(adev->service_path, (char *)svc_path))
+			device_unregister(&adev->dev);
+	} else {
+		device_unregister(&adev->dev);
+	}
+
+	return 0;
+}
+
+static void apr_pd_status(int state, char *svc_path, void *priv)
+{
+	struct apr *apr = (struct apr *)priv;
+
+	switch (state) {
+	case SERVREG_SERVICE_STATE_UP:
+		of_register_apr_devices(apr->dev, svc_path);
+		break;
+	case SERVREG_SERVICE_STATE_DOWN:
+		device_for_each_child(apr->dev, svc_path, apr_remove_device);
+		break;
+	}
+}
+
 static int apr_probe(struct rpmsg_device *rpdev)
 {
 	struct device *dev = &rpdev->dev;
@@ -343,28 +437,39 @@ static int apr_probe(struct rpmsg_device *rpdev)
 		return -ENOMEM;
 	}
 	INIT_WORK(&apr->rx_work, apr_rxwq);
+
+	apr->pdr = pdr_handle_alloc(apr_pd_status, apr);
+	if (IS_ERR(apr->pdr)) {
+		dev_err(dev, "Failed to init PDR handle\n");
+		ret = PTR_ERR(apr->pdr);
+		goto destroy_wq;
+	}
+
 	INIT_LIST_HEAD(&apr->rx_list);
 	spin_lock_init(&apr->rx_lock);
 	spin_lock_init(&apr->svcs_lock);
 	idr_init(&apr->svcs_idr);
-	of_register_apr_devices(dev);
+
+	ret = of_apr_add_pd_lookups(dev);
+	if (ret)
+		goto handle_release;
+
+	of_register_apr_devices(dev, NULL);
 
 	return 0;
-}
 
-static int apr_remove_device(struct device *dev, void *null)
-{
-	struct apr_device *adev = to_apr_device(dev);
-
-	device_unregister(&adev->dev);
-
-	return 0;
+handle_release:
+	pdr_handle_release(apr->pdr);
+destroy_wq:
+	destroy_workqueue(apr->rxwq);
+	return ret;
 }
 
 static void apr_remove(struct rpmsg_device *rpdev)
 {
 	struct apr *apr = dev_get_drvdata(&rpdev->dev);
 
+	pdr_handle_release(apr->pdr);
 	device_for_each_child(&rpdev->dev, NULL, apr_remove_device);
 	flush_workqueue(apr->rxwq);
 	destroy_workqueue(apr->rxwq);
diff --git a/drivers/soc/qcom/pdr_interface.c b/drivers/soc/qcom/pdr_interface.c
new file mode 100644
index 0000000..17ad3b8
--- /dev/null
+++ b/drivers/soc/qcom/pdr_interface.c
@@ -0,0 +1,757 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/workqueue.h>
+
+#include "pdr_internal.h"
+
+struct pdr_service {
+	char service_name[SERVREG_NAME_LENGTH + 1];
+	char service_path[SERVREG_NAME_LENGTH + 1];
+
+	struct sockaddr_qrtr addr;
+
+	unsigned int instance;
+	unsigned int service;
+	u8 service_data_valid;
+	u32 service_data;
+	int state;
+
+	bool need_notifier_register;
+	bool need_notifier_remove;
+	bool need_locator_lookup;
+	bool service_connected;
+
+	struct list_head node;
+};
+
+struct pdr_handle {
+	struct qmi_handle locator_hdl;
+	struct qmi_handle notifier_hdl;
+
+	struct sockaddr_qrtr locator_addr;
+
+	struct list_head lookups;
+	struct list_head indack_list;
+
+	/* control access to pdr lookup/indack lists */
+	struct mutex list_lock;
+
+	/* serialize pd status invocation */
+	struct mutex status_lock;
+
+	/* control access to the locator state */
+	struct mutex lock;
+
+	bool locator_init_complete;
+
+	struct work_struct locator_work;
+	struct work_struct notifier_work;
+	struct work_struct indack_work;
+
+	struct workqueue_struct *notifier_wq;
+	struct workqueue_struct *indack_wq;
+
+	void (*status)(int state, char *service_path, void *priv);
+	void *priv;
+};
+
+struct pdr_list_node {
+	enum servreg_service_state curr_state;
+	u16 transaction_id;
+	struct pdr_service *pds;
+	struct list_head node;
+};
+
+static int pdr_locator_new_server(struct qmi_handle *qmi,
+				  struct qmi_service *svc)
+{
+	struct pdr_handle *pdr = container_of(qmi, struct pdr_handle,
+					      locator_hdl);
+	struct pdr_service *pds;
+
+	/* Create a local client port for QMI communication */
+	pdr->locator_addr.sq_family = AF_QIPCRTR;
+	pdr->locator_addr.sq_node = svc->node;
+	pdr->locator_addr.sq_port = svc->port;
+
+	mutex_lock(&pdr->lock);
+	pdr->locator_init_complete = true;
+	mutex_unlock(&pdr->lock);
+
+	/* Service pending lookup requests */
+	mutex_lock(&pdr->list_lock);
+	list_for_each_entry(pds, &pdr->lookups, node) {
+		if (pds->need_locator_lookup)
+			schedule_work(&pdr->locator_work);
+	}
+	mutex_unlock(&pdr->list_lock);
+
+	return 0;
+}
+
+static void pdr_locator_del_server(struct qmi_handle *qmi,
+				   struct qmi_service *svc)
+{
+	struct pdr_handle *pdr = container_of(qmi, struct pdr_handle,
+					      locator_hdl);
+
+	mutex_lock(&pdr->lock);
+	pdr->locator_init_complete = false;
+	mutex_unlock(&pdr->lock);
+
+	pdr->locator_addr.sq_node = 0;
+	pdr->locator_addr.sq_port = 0;
+}
+
+static struct qmi_ops pdr_locator_ops = {
+	.new_server = pdr_locator_new_server,
+	.del_server = pdr_locator_del_server,
+};
+
+static int pdr_register_listener(struct pdr_handle *pdr,
+				 struct pdr_service *pds,
+				 bool enable)
+{
+	struct servreg_register_listener_resp resp;
+	struct servreg_register_listener_req req;
+	struct qmi_txn txn;
+	int ret;
+
+	ret = qmi_txn_init(&pdr->notifier_hdl, &txn,
+			   servreg_register_listener_resp_ei,
+			   &resp);
+	if (ret < 0)
+		return ret;
+
+	req.enable = enable;
+	strcpy(req.service_path, pds->service_path);
+
+	ret = qmi_send_request(&pdr->notifier_hdl, &pds->addr,
+			       &txn, SERVREG_REGISTER_LISTENER_REQ,
+			       SERVREG_REGISTER_LISTENER_REQ_LEN,
+			       servreg_register_listener_req_ei,
+			       &req);
+	if (ret < 0) {
+		qmi_txn_cancel(&txn);
+		return ret;
+	}
+
+	ret = qmi_txn_wait(&txn, 5 * HZ);
+	if (ret < 0) {
+		pr_err("PDR: %s register listener txn wait failed: %d\n",
+		       pds->service_path, ret);
+		return ret;
+	}
+
+	if (resp.resp.result != QMI_RESULT_SUCCESS_V01) {
+		pr_err("PDR: %s register listener failed: 0x%x\n",
+		       pds->service_path, resp.resp.error);
+		return ret;
+	}
+
+	if ((int)resp.curr_state < INT_MIN || (int)resp.curr_state > INT_MAX)
+		pr_err("PDR: %s notification state invalid: 0x%x\n",
+		       pds->service_path, resp.curr_state);
+
+	pds->state = resp.curr_state;
+
+	return 0;
+}
+
+static void pdr_notifier_work(struct work_struct *work)
+{
+	struct pdr_handle *pdr = container_of(work, struct pdr_handle,
+					      notifier_work);
+	struct pdr_service *pds;
+	int ret;
+
+	mutex_lock(&pdr->list_lock);
+	list_for_each_entry(pds, &pdr->lookups, node) {
+		if (pds->service_connected) {
+			if (!pds->need_notifier_register)
+				continue;
+
+			pds->need_notifier_register = false;
+			ret = pdr_register_listener(pdr, pds, true);
+			if (ret < 0)
+				pds->state = SERVREG_SERVICE_STATE_DOWN;
+		} else {
+			if (!pds->need_notifier_remove)
+				continue;
+
+			pds->need_notifier_remove = false;
+			pds->state = SERVREG_SERVICE_STATE_DOWN;
+		}
+
+		mutex_lock(&pdr->status_lock);
+		pdr->status(pds->state, pds->service_path, pdr->priv);
+		mutex_unlock(&pdr->status_lock);
+	}
+	mutex_unlock(&pdr->list_lock);
+}
+
+static int pdr_notifier_new_server(struct qmi_handle *qmi,
+				   struct qmi_service *svc)
+{
+	struct pdr_handle *pdr = container_of(qmi, struct pdr_handle,
+					      notifier_hdl);
+	struct pdr_service *pds;
+
+	mutex_lock(&pdr->list_lock);
+	list_for_each_entry(pds, &pdr->lookups, node) {
+		if (pds->service == svc->service &&
+		    pds->instance == svc->instance) {
+			pds->service_connected = true;
+			pds->need_notifier_register = true;
+			pds->addr.sq_family = AF_QIPCRTR;
+			pds->addr.sq_node = svc->node;
+			pds->addr.sq_port = svc->port;
+			queue_work(pdr->notifier_wq, &pdr->notifier_work);
+		}
+	}
+	mutex_unlock(&pdr->list_lock);
+
+	return 0;
+}
+
+static void pdr_notifier_del_server(struct qmi_handle *qmi,
+				    struct qmi_service *svc)
+{
+	struct pdr_handle *pdr = container_of(qmi, struct pdr_handle,
+					      notifier_hdl);
+	struct pdr_service *pds;
+
+	mutex_lock(&pdr->list_lock);
+	list_for_each_entry(pds, &pdr->lookups, node) {
+		if (pds->service == svc->service &&
+		    pds->instance == svc->instance) {
+			pds->service_connected = false;
+			pds->need_notifier_remove = true;
+			pds->addr.sq_node = 0;
+			pds->addr.sq_port = 0;
+			queue_work(pdr->notifier_wq, &pdr->notifier_work);
+		}
+	}
+	mutex_unlock(&pdr->list_lock);
+}
+
+static struct qmi_ops pdr_notifier_ops = {
+	.new_server = pdr_notifier_new_server,
+	.del_server = pdr_notifier_del_server,
+};
+
+static int pdr_send_indack_msg(struct pdr_handle *pdr, struct pdr_service *pds,
+			       u16 tid)
+{
+	struct servreg_set_ack_resp resp;
+	struct servreg_set_ack_req req;
+	struct qmi_txn txn;
+	int ret;
+
+	ret = qmi_txn_init(&pdr->notifier_hdl, &txn, servreg_set_ack_resp_ei,
+			   &resp);
+	if (ret < 0)
+		return ret;
+
+	req.transaction_id = tid;
+	strcpy(req.service_path, pds->service_path);
+
+	ret = qmi_send_request(&pdr->notifier_hdl, &pds->addr,
+			       &txn, SERVREG_SET_ACK_REQ,
+			       SERVREG_SET_ACK_REQ_LEN,
+			       servreg_set_ack_req_ei,
+			       &req);
+
+	/* Skip waiting for response */
+	qmi_txn_cancel(&txn);
+	return ret;
+}
+
+static void pdr_indack_work(struct work_struct *work)
+{
+	struct pdr_handle *pdr = container_of(work, struct pdr_handle,
+					      indack_work);
+	struct pdr_list_node *ind, *tmp;
+	struct pdr_service *pds;
+
+	list_for_each_entry_safe(ind, tmp, &pdr->indack_list, node) {
+		pds = ind->pds;
+		pdr_send_indack_msg(pdr, pds, ind->transaction_id);
+
+		mutex_lock(&pdr->status_lock);
+		pds->state = ind->curr_state;
+		pdr->status(pds->state, pds->service_path, pdr->priv);
+		mutex_unlock(&pdr->status_lock);
+
+		mutex_lock(&pdr->list_lock);
+		list_del(&ind->node);
+		mutex_unlock(&pdr->list_lock);
+
+		kfree(ind);
+	}
+}
+
+static void pdr_indication_cb(struct qmi_handle *qmi,
+			      struct sockaddr_qrtr *sq,
+			      struct qmi_txn *txn, const void *data)
+{
+	struct pdr_handle *pdr = container_of(qmi, struct pdr_handle,
+					      notifier_hdl);
+	const struct servreg_state_updated_ind *ind_msg = data;
+	struct pdr_list_node *ind;
+	struct pdr_service *pds;
+	bool found = false;
+
+	if (!ind_msg || !ind_msg->service_path[0] ||
+	    strlen(ind_msg->service_path) > SERVREG_NAME_LENGTH)
+		return;
+
+	mutex_lock(&pdr->list_lock);
+	list_for_each_entry(pds, &pdr->lookups, node) {
+		if (strcmp(pds->service_path, ind_msg->service_path))
+			continue;
+
+		found = true;
+		break;
+	}
+	mutex_unlock(&pdr->list_lock);
+
+	if (!found)
+		return;
+
+	pr_info("PDR: Indication received from %s, state: 0x%x, trans-id: %d\n",
+		ind_msg->service_path, ind_msg->curr_state,
+		ind_msg->transaction_id);
+
+	ind = kzalloc(sizeof(*ind), GFP_KERNEL);
+	if (!ind)
+		return;
+
+	ind->transaction_id = ind_msg->transaction_id;
+	ind->curr_state = ind_msg->curr_state;
+	ind->pds = pds;
+
+	mutex_lock(&pdr->list_lock);
+	list_add_tail(&ind->node, &pdr->indack_list);
+	mutex_unlock(&pdr->list_lock);
+
+	queue_work(pdr->indack_wq, &pdr->indack_work);
+}
+
+static struct qmi_msg_handler qmi_indication_handler[] = {
+	{
+		.type = QMI_INDICATION,
+		.msg_id = SERVREG_STATE_UPDATED_IND_ID,
+		.ei = servreg_state_updated_ind_ei,
+		.decoded_size = sizeof(struct servreg_state_updated_ind),
+		.fn = pdr_indication_cb,
+	},
+	{}
+};
+
+static int pdr_get_domain_list(struct servreg_get_domain_list_req *req,
+			       struct servreg_get_domain_list_resp *resp,
+			       struct pdr_handle *pdr)
+{
+	struct qmi_txn txn;
+	int ret;
+
+	ret = qmi_txn_init(&pdr->locator_hdl, &txn,
+			   servreg_get_domain_list_resp_ei, resp);
+	if (ret < 0)
+		return ret;
+
+	ret = qmi_send_request(&pdr->locator_hdl,
+			       &pdr->locator_addr,
+			       &txn, SERVREG_GET_DOMAIN_LIST_REQ,
+			       SERVREG_GET_DOMAIN_LIST_REQ_MAX_LEN,
+			       servreg_get_domain_list_req_ei,
+			       req);
+	if (ret < 0) {
+		qmi_txn_cancel(&txn);
+		return ret;
+	}
+
+	ret = qmi_txn_wait(&txn, 5 * HZ);
+	if (ret < 0) {
+		pr_err("PDR: %s get domain list txn wait failed: %d\n",
+		       req->service_name, ret);
+		return ret;
+	}
+
+	if (resp->resp.result != QMI_RESULT_SUCCESS_V01) {
+		pr_err("PDR: %s get domain list failed: 0x%x\n",
+		       req->service_name, resp->resp.error);
+		return -EREMOTEIO;
+	}
+
+	return 0;
+}
+
+static int pdr_locate_service(struct pdr_handle *pdr, struct pdr_service *pds)
+{
+	struct servreg_get_domain_list_resp *resp;
+	struct servreg_get_domain_list_req req;
+	struct servreg_location_entry *entry;
+	int domains_read = 0;
+	int ret, i;
+
+	resp = kzalloc(sizeof(*resp), GFP_KERNEL);
+	if (!resp)
+		return -ENOMEM;
+
+	/* Prepare req message */
+	strcpy(req.service_name, pds->service_name);
+	req.domain_offset_valid = true;
+	req.domain_offset = 0;
+
+	do {
+		req.domain_offset = domains_read;
+		ret = pdr_get_domain_list(&req, resp, pdr);
+		if (ret < 0)
+			goto out;
+
+		for (i = domains_read; i < resp->domain_list_len; i++) {
+			entry = &resp->domain_list[i];
+
+			if (strnlen(entry->name, sizeof(entry->name)) == sizeof(entry->name))
+				continue;
+
+			if (!strcmp(entry->name, pds->service_path)) {
+				pds->service_data_valid = entry->service_data_valid;
+				pds->service_data = entry->service_data;
+				pds->instance = entry->instance;
+				goto out;
+			}
+		}
+
+		/* Update ret to indicate that the service is not yet found */
+		ret = -ENXIO;
+
+		/* Always read total_domains from the response msg */
+		if (resp->domain_list_len > resp->total_domains)
+			resp->domain_list_len = resp->total_domains;
+
+		domains_read += resp->domain_list_len;
+	} while (domains_read < resp->total_domains);
+out:
+	kfree(resp);
+	return ret;
+}
+
+static void pdr_notify_lookup_failure(struct pdr_handle *pdr,
+				      struct pdr_service *pds,
+				      int err)
+{
+	pr_err("PDR: service lookup for %s failed: %d\n",
+	       pds->service_name, err);
+
+	if (err == -ENXIO)
+		return;
+
+	list_del(&pds->node);
+	pds->state = SERVREG_LOCATOR_ERR;
+	mutex_lock(&pdr->status_lock);
+	pdr->status(pds->state, pds->service_path, pdr->priv);
+	mutex_unlock(&pdr->status_lock);
+	kfree(pds);
+}
+
+static void pdr_locator_work(struct work_struct *work)
+{
+	struct pdr_handle *pdr = container_of(work, struct pdr_handle,
+					      locator_work);
+	struct pdr_service *pds, *tmp;
+	int ret = 0;
+
+	/* Bail out early if the SERVREG LOCATOR QMI service is not up */
+	mutex_lock(&pdr->lock);
+	if (!pdr->locator_init_complete) {
+		mutex_unlock(&pdr->lock);
+		pr_debug("PDR: SERVICE LOCATOR service not available\n");
+		return;
+	}
+	mutex_unlock(&pdr->lock);
+
+	mutex_lock(&pdr->list_lock);
+	list_for_each_entry_safe(pds, tmp, &pdr->lookups, node) {
+		if (!pds->need_locator_lookup)
+			continue;
+
+		ret = pdr_locate_service(pdr, pds);
+		if (ret < 0) {
+			pdr_notify_lookup_failure(pdr, pds, ret);
+			continue;
+		}
+
+		ret = qmi_add_lookup(&pdr->notifier_hdl, pds->service, 1,
+				     pds->instance);
+		if (ret < 0) {
+			pdr_notify_lookup_failure(pdr, pds, ret);
+			continue;
+		}
+
+		pds->need_locator_lookup = false;
+	}
+	mutex_unlock(&pdr->list_lock);
+}
+
+/**
+ * pdr_add_lookup() - register a tracking request for a PD
+ * @pdr:		PDR client handle
+ * @service_name:	service name of the tracking request
+ * @service_path:	service path of the tracking request
+ *
+ * Registering a pdr lookup allows for tracking the life cycle of the PD.
+ *
+ * Return: pdr_service object on success, ERR_PTR on failure. -EALREADY is
+ * returned if a lookup is already in progress for the given service path.
+ */
+struct pdr_service *pdr_add_lookup(struct pdr_handle *pdr,
+				   const char *service_name,
+				   const char *service_path)
+{
+	struct pdr_service *pds, *tmp;
+	int ret;
+
+	if (IS_ERR_OR_NULL(pdr))
+		return ERR_PTR(-EINVAL);
+
+	if (!service_name || strlen(service_name) > SERVREG_NAME_LENGTH ||
+	    !service_path || strlen(service_path) > SERVREG_NAME_LENGTH)
+		return ERR_PTR(-EINVAL);
+
+	pds = kzalloc(sizeof(*pds), GFP_KERNEL);
+	if (!pds)
+		return ERR_PTR(-ENOMEM);
+
+	pds->service = SERVREG_NOTIFIER_SERVICE;
+	strcpy(pds->service_name, service_name);
+	strcpy(pds->service_path, service_path);
+	pds->need_locator_lookup = true;
+
+	mutex_lock(&pdr->list_lock);
+	list_for_each_entry(tmp, &pdr->lookups, node) {
+		if (strcmp(tmp->service_path, service_path))
+			continue;
+
+		mutex_unlock(&pdr->list_lock);
+		ret = -EALREADY;
+		goto err;
+	}
+
+	list_add(&pds->node, &pdr->lookups);
+	mutex_unlock(&pdr->list_lock);
+
+	schedule_work(&pdr->locator_work);
+
+	return pds;
+err:
+	kfree(pds);
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL(pdr_add_lookup);
+
+/**
+ * pdr_restart_pd() - restart PD
+ * @pdr:	PDR client handle
+ * @pds:	PD service handle
+ *
+ * Restarts the PD tracked by the PDR client handle for a given service path.
+ *
+ * Return: 0 on success, negative errno on failure.
+ */
+int pdr_restart_pd(struct pdr_handle *pdr, struct pdr_service *pds)
+{
+	struct servreg_restart_pd_resp resp;
+	struct servreg_restart_pd_req req;
+	struct sockaddr_qrtr addr;
+	struct pdr_service *tmp;
+	struct qmi_txn txn;
+	int ret;
+
+	if (IS_ERR_OR_NULL(pdr) || IS_ERR_OR_NULL(pds))
+		return -EINVAL;
+
+	mutex_lock(&pdr->list_lock);
+	list_for_each_entry(tmp, &pdr->lookups, node) {
+		if (tmp != pds)
+			continue;
+
+		if (!pds->service_connected)
+			break;
+
+		/* Prepare req message */
+		strcpy(req.service_path, pds->service_path);
+		addr = pds->addr;
+		break;
+	}
+	mutex_unlock(&pdr->list_lock);
+
+	if (!req.service_path[0])
+		return -EINVAL;
+
+	ret = qmi_txn_init(&pdr->notifier_hdl, &txn,
+			   servreg_restart_pd_resp_ei,
+			   &resp);
+	if (ret < 0)
+		return ret;
+
+	ret = qmi_send_request(&pdr->notifier_hdl, &addr,
+			       &txn, SERVREG_RESTART_PD_REQ,
+			       SERVREG_RESTART_PD_REQ_MAX_LEN,
+			       servreg_restart_pd_req_ei, &req);
+	if (ret < 0) {
+		qmi_txn_cancel(&txn);
+		return ret;
+	}
+
+	ret = qmi_txn_wait(&txn, 5 * HZ);
+	if (ret < 0) {
+		pr_err("PDR: %s PD restart txn wait failed: %d\n",
+		       req.service_path, ret);
+		return ret;
+	}
+
+	/* Check response if PDR is disabled */
+	if (resp.resp.result == QMI_RESULT_FAILURE_V01 &&
+	    resp.resp.error == QMI_ERR_DISABLED_V01) {
+		pr_err("PDR: %s PD restart is disabled: 0x%x\n",
+		       req.service_path, resp.resp.error);
+		return -EOPNOTSUPP;
+	}
+
+	/* Check the response for other error case*/
+	if (resp.resp.result != QMI_RESULT_SUCCESS_V01) {
+		pr_err("PDR: %s request for PD restart failed: 0x%x\n",
+		       req.service_path, resp.resp.error);
+		return -EREMOTEIO;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(pdr_restart_pd);
+
+/**
+ * pdr_handle_alloc() - initialize the PDR client handle
+ * @status:	function to be called on PD state change
+ * @priv:	handle for client's use
+ *
+ * Initializes the PDR client handle to allow for tracking/restart of PDs.
+ *
+ * Return: pdr_handle object on success, ERR_PTR on failure.
+ */
+struct pdr_handle *pdr_handle_alloc(void (*status)(int state,
+						   char *service_path,
+						   void *priv), void *priv)
+{
+	struct pdr_handle *pdr;
+	int ret;
+
+	if (!status)
+		return ERR_PTR(-EINVAL);
+
+	pdr = kzalloc(sizeof(*pdr), GFP_KERNEL);
+	if (!pdr)
+		return ERR_PTR(-ENOMEM);
+
+	pdr->status = status;
+	pdr->priv = priv;
+
+	mutex_init(&pdr->status_lock);
+	mutex_init(&pdr->list_lock);
+	mutex_init(&pdr->lock);
+
+	INIT_LIST_HEAD(&pdr->lookups);
+	INIT_LIST_HEAD(&pdr->indack_list);
+
+	INIT_WORK(&pdr->locator_work, pdr_locator_work);
+	INIT_WORK(&pdr->notifier_work, pdr_notifier_work);
+	INIT_WORK(&pdr->indack_work, pdr_indack_work);
+
+	pdr->notifier_wq = create_singlethread_workqueue("pdr_notifier_wq");
+	if (!pdr->notifier_wq) {
+		ret = -ENOMEM;
+		goto free_pdr_handle;
+	}
+
+	pdr->indack_wq = alloc_ordered_workqueue("pdr_indack_wq", WQ_HIGHPRI);
+	if (!pdr->indack_wq) {
+		ret = -ENOMEM;
+		goto destroy_notifier;
+	}
+
+	ret = qmi_handle_init(&pdr->locator_hdl,
+			      SERVREG_GET_DOMAIN_LIST_RESP_MAX_LEN,
+			      &pdr_locator_ops, NULL);
+	if (ret < 0)
+		goto destroy_indack;
+
+	ret = qmi_add_lookup(&pdr->locator_hdl, SERVREG_LOCATOR_SERVICE, 1, 1);
+	if (ret < 0)
+		goto release_qmi_handle;
+
+	ret = qmi_handle_init(&pdr->notifier_hdl,
+			      SERVREG_STATE_UPDATED_IND_MAX_LEN,
+			      &pdr_notifier_ops,
+			      qmi_indication_handler);
+	if (ret < 0)
+		goto release_qmi_handle;
+
+	return pdr;
+
+release_qmi_handle:
+	qmi_handle_release(&pdr->locator_hdl);
+destroy_indack:
+	destroy_workqueue(pdr->indack_wq);
+destroy_notifier:
+	destroy_workqueue(pdr->notifier_wq);
+free_pdr_handle:
+	kfree(pdr);
+
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL(pdr_handle_alloc);
+
+/**
+ * pdr_handle_release() - release the PDR client handle
+ * @pdr:	PDR client handle
+ *
+ * Cleans up pending tracking requests and releases the underlying qmi handles.
+ */
+void pdr_handle_release(struct pdr_handle *pdr)
+{
+	struct pdr_service *pds, *tmp;
+
+	if (IS_ERR_OR_NULL(pdr))
+		return;
+
+	mutex_lock(&pdr->list_lock);
+	list_for_each_entry_safe(pds, tmp, &pdr->lookups, node) {
+		list_del(&pds->node);
+		kfree(pds);
+	}
+	mutex_unlock(&pdr->list_lock);
+
+	cancel_work_sync(&pdr->locator_work);
+	cancel_work_sync(&pdr->notifier_work);
+	cancel_work_sync(&pdr->indack_work);
+
+	destroy_workqueue(pdr->notifier_wq);
+	destroy_workqueue(pdr->indack_wq);
+
+	qmi_handle_release(&pdr->locator_hdl);
+	qmi_handle_release(&pdr->notifier_hdl);
+
+	kfree(pdr);
+}
+EXPORT_SYMBOL(pdr_handle_release);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Qualcomm Protection Domain Restart helpers");
diff --git a/drivers/soc/qcom/pdr_internal.h b/drivers/soc/qcom/pdr_internal.h
new file mode 100644
index 0000000..15b5002
--- /dev/null
+++ b/drivers/soc/qcom/pdr_internal.h
@@ -0,0 +1,379 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __QCOM_PDR_HELPER_INTERNAL__
+#define __QCOM_PDR_HELPER_INTERNAL__
+
+#include <linux/soc/qcom/pdr.h>
+
+#define SERVREG_LOCATOR_SERVICE				0x40
+#define SERVREG_NOTIFIER_SERVICE			0x42
+
+#define SERVREG_REGISTER_LISTENER_REQ			0x20
+#define SERVREG_GET_DOMAIN_LIST_REQ			0x21
+#define SERVREG_STATE_UPDATED_IND_ID			0x22
+#define SERVREG_SET_ACK_REQ				0x23
+#define SERVREG_RESTART_PD_REQ				0x24
+
+#define SERVREG_DOMAIN_LIST_LENGTH			32
+#define SERVREG_RESTART_PD_REQ_MAX_LEN			67
+#define SERVREG_REGISTER_LISTENER_REQ_LEN		71
+#define SERVREG_SET_ACK_REQ_LEN				72
+#define SERVREG_GET_DOMAIN_LIST_REQ_MAX_LEN		74
+#define SERVREG_STATE_UPDATED_IND_MAX_LEN		79
+#define SERVREG_GET_DOMAIN_LIST_RESP_MAX_LEN		2389
+
+struct servreg_location_entry {
+	char name[SERVREG_NAME_LENGTH + 1];
+	u8 service_data_valid;
+	u32 service_data;
+	u32 instance;
+};
+
+struct qmi_elem_info servreg_location_entry_ei[] = {
+	{
+		.data_type      = QMI_STRING,
+		.elem_len       = SERVREG_NAME_LENGTH + 1,
+		.elem_size      = sizeof(char),
+		.array_type	= NO_ARRAY,
+		.tlv_type       = 0,
+		.offset         = offsetof(struct servreg_location_entry,
+					   name),
+	},
+	{
+		.data_type      = QMI_UNSIGNED_4_BYTE,
+		.elem_len       = 1,
+		.elem_size      = sizeof(u32),
+		.array_type	= NO_ARRAY,
+		.tlv_type       = 0,
+		.offset         = offsetof(struct servreg_location_entry,
+					   instance),
+	},
+	{
+		.data_type      = QMI_UNSIGNED_1_BYTE,
+		.elem_len       = 1,
+		.elem_size      = sizeof(u8),
+		.array_type	= NO_ARRAY,
+		.tlv_type       = 0,
+		.offset         = offsetof(struct servreg_location_entry,
+					   service_data_valid),
+	},
+	{
+		.data_type      = QMI_UNSIGNED_4_BYTE,
+		.elem_len       = 1,
+		.elem_size      = sizeof(u32),
+		.array_type	= NO_ARRAY,
+		.tlv_type       = 0,
+		.offset         = offsetof(struct servreg_location_entry,
+					   service_data),
+	},
+	{}
+};
+
+struct servreg_get_domain_list_req {
+	char service_name[SERVREG_NAME_LENGTH + 1];
+	u8 domain_offset_valid;
+	u32 domain_offset;
+};
+
+struct qmi_elem_info servreg_get_domain_list_req_ei[] = {
+	{
+		.data_type      = QMI_STRING,
+		.elem_len       = SERVREG_NAME_LENGTH + 1,
+		.elem_size      = sizeof(char),
+		.array_type	= NO_ARRAY,
+		.tlv_type       = 0x01,
+		.offset         = offsetof(struct servreg_get_domain_list_req,
+					   service_name),
+	},
+	{
+		.data_type      = QMI_OPT_FLAG,
+		.elem_len       = 1,
+		.elem_size      = sizeof(u8),
+		.array_type	= NO_ARRAY,
+		.tlv_type       = 0x10,
+		.offset         = offsetof(struct servreg_get_domain_list_req,
+					   domain_offset_valid),
+	},
+	{
+		.data_type      = QMI_UNSIGNED_4_BYTE,
+		.elem_len       = 1,
+		.elem_size      = sizeof(u32),
+		.array_type	= NO_ARRAY,
+		.tlv_type       = 0x10,
+		.offset         = offsetof(struct servreg_get_domain_list_req,
+					   domain_offset),
+	},
+	{}
+};
+
+struct servreg_get_domain_list_resp {
+	struct qmi_response_type_v01 resp;
+	u8 total_domains_valid;
+	u16 total_domains;
+	u8 db_rev_count_valid;
+	u16 db_rev_count;
+	u8 domain_list_valid;
+	u32 domain_list_len;
+	struct servreg_location_entry domain_list[SERVREG_DOMAIN_LIST_LENGTH];
+};
+
+struct qmi_elem_info servreg_get_domain_list_resp_ei[] = {
+	{
+		.data_type      = QMI_STRUCT,
+		.elem_len       = 1,
+		.elem_size      = sizeof(struct qmi_response_type_v01),
+		.array_type	= NO_ARRAY,
+		.tlv_type       = 0x02,
+		.offset         = offsetof(struct servreg_get_domain_list_resp,
+					   resp),
+		.ei_array      = qmi_response_type_v01_ei,
+	},
+	{
+		.data_type      = QMI_OPT_FLAG,
+		.elem_len       = 1,
+		.elem_size      = sizeof(u8),
+		.array_type	= NO_ARRAY,
+		.tlv_type       = 0x10,
+		.offset         = offsetof(struct servreg_get_domain_list_resp,
+					   total_domains_valid),
+	},
+	{
+		.data_type      = QMI_UNSIGNED_2_BYTE,
+		.elem_len       = 1,
+		.elem_size      = sizeof(u16),
+		.array_type	= NO_ARRAY,
+		.tlv_type       = 0x10,
+		.offset         = offsetof(struct servreg_get_domain_list_resp,
+					   total_domains),
+	},
+	{
+		.data_type      = QMI_OPT_FLAG,
+		.elem_len       = 1,
+		.elem_size      = sizeof(u8),
+		.array_type	= NO_ARRAY,
+		.tlv_type       = 0x11,
+		.offset         = offsetof(struct servreg_get_domain_list_resp,
+					   db_rev_count_valid),
+	},
+	{
+		.data_type      = QMI_UNSIGNED_2_BYTE,
+		.elem_len       = 1,
+		.elem_size      = sizeof(u16),
+		.array_type	= NO_ARRAY,
+		.tlv_type       = 0x11,
+		.offset         = offsetof(struct servreg_get_domain_list_resp,
+					   db_rev_count),
+	},
+	{
+		.data_type      = QMI_OPT_FLAG,
+		.elem_len       = 1,
+		.elem_size      = sizeof(u8),
+		.array_type	= NO_ARRAY,
+		.tlv_type       = 0x12,
+		.offset         = offsetof(struct servreg_get_domain_list_resp,
+					   domain_list_valid),
+	},
+	{
+		.data_type      = QMI_DATA_LEN,
+		.elem_len       = 1,
+		.elem_size      = sizeof(u8),
+		.array_type	= NO_ARRAY,
+		.tlv_type       = 0x12,
+		.offset         = offsetof(struct servreg_get_domain_list_resp,
+					   domain_list_len),
+	},
+	{
+		.data_type      = QMI_STRUCT,
+		.elem_len       = SERVREG_DOMAIN_LIST_LENGTH,
+		.elem_size      = sizeof(struct servreg_location_entry),
+		.array_type	= NO_ARRAY,
+		.tlv_type       = 0x12,
+		.offset         = offsetof(struct servreg_get_domain_list_resp,
+					   domain_list),
+		.ei_array      = servreg_location_entry_ei,
+	},
+	{}
+};
+
+struct servreg_register_listener_req {
+	u8 enable;
+	char service_path[SERVREG_NAME_LENGTH + 1];
+};
+
+struct qmi_elem_info servreg_register_listener_req_ei[] = {
+	{
+		.data_type      = QMI_UNSIGNED_1_BYTE,
+		.elem_len       = 1,
+		.elem_size      = sizeof(u8),
+		.array_type	= NO_ARRAY,
+		.tlv_type       = 0x01,
+		.offset         = offsetof(struct servreg_register_listener_req,
+					   enable),
+	},
+	{
+		.data_type      = QMI_STRING,
+		.elem_len       = SERVREG_NAME_LENGTH + 1,
+		.elem_size      = sizeof(char),
+		.array_type	= NO_ARRAY,
+		.tlv_type       = 0x02,
+		.offset         = offsetof(struct servreg_register_listener_req,
+					   service_path),
+	},
+	{}
+};
+
+struct servreg_register_listener_resp {
+	struct qmi_response_type_v01 resp;
+	u8 curr_state_valid;
+	enum servreg_service_state curr_state;
+};
+
+struct qmi_elem_info servreg_register_listener_resp_ei[] = {
+	{
+		.data_type      = QMI_STRUCT,
+		.elem_len       = 1,
+		.elem_size      = sizeof(struct qmi_response_type_v01),
+		.array_type	= NO_ARRAY,
+		.tlv_type       = 0x02,
+		.offset         = offsetof(struct servreg_register_listener_resp,
+					   resp),
+		.ei_array      = qmi_response_type_v01_ei,
+	},
+	{
+		.data_type      = QMI_OPT_FLAG,
+		.elem_len       = 1,
+		.elem_size      = sizeof(u8),
+		.array_type	= NO_ARRAY,
+		.tlv_type       = 0x10,
+		.offset         = offsetof(struct servreg_register_listener_resp,
+					   curr_state_valid),
+	},
+	{
+		.data_type      = QMI_SIGNED_4_BYTE_ENUM,
+		.elem_len       = 1,
+		.elem_size      = sizeof(enum servreg_service_state),
+		.array_type	= NO_ARRAY,
+		.tlv_type       = 0x10,
+		.offset         = offsetof(struct servreg_register_listener_resp,
+					   curr_state),
+	},
+	{}
+};
+
+struct servreg_restart_pd_req {
+	char service_path[SERVREG_NAME_LENGTH + 1];
+};
+
+struct qmi_elem_info servreg_restart_pd_req_ei[] = {
+	{
+		.data_type      = QMI_STRING,
+		.elem_len       = SERVREG_NAME_LENGTH + 1,
+		.elem_size      = sizeof(char),
+		.array_type	= NO_ARRAY,
+		.tlv_type       = 0x01,
+		.offset         = offsetof(struct servreg_restart_pd_req,
+					   service_path),
+	},
+	{}
+};
+
+struct servreg_restart_pd_resp {
+	struct qmi_response_type_v01 resp;
+};
+
+struct qmi_elem_info servreg_restart_pd_resp_ei[] = {
+	{
+		.data_type      = QMI_STRUCT,
+		.elem_len       = 1,
+		.elem_size      = sizeof(struct qmi_response_type_v01),
+		.array_type	= NO_ARRAY,
+		.tlv_type       = 0x02,
+		.offset         = offsetof(struct servreg_restart_pd_resp,
+					   resp),
+		.ei_array      = qmi_response_type_v01_ei,
+	},
+	{}
+};
+
+struct servreg_state_updated_ind {
+	enum servreg_service_state curr_state;
+	char service_path[SERVREG_NAME_LENGTH + 1];
+	u16 transaction_id;
+};
+
+struct qmi_elem_info servreg_state_updated_ind_ei[] = {
+	{
+		.data_type      = QMI_SIGNED_4_BYTE_ENUM,
+		.elem_len       = 1,
+		.elem_size      = sizeof(u32),
+		.array_type	= NO_ARRAY,
+		.tlv_type       = 0x01,
+		.offset         = offsetof(struct servreg_state_updated_ind,
+					   curr_state),
+	},
+	{
+		.data_type      = QMI_STRING,
+		.elem_len       = SERVREG_NAME_LENGTH + 1,
+		.elem_size      = sizeof(char),
+		.array_type	= NO_ARRAY,
+		.tlv_type       = 0x02,
+		.offset         = offsetof(struct servreg_state_updated_ind,
+					   service_path),
+	},
+	{
+		.data_type      = QMI_UNSIGNED_2_BYTE,
+		.elem_len       = 1,
+		.elem_size      = sizeof(u16),
+		.array_type	= NO_ARRAY,
+		.tlv_type       = 0x03,
+		.offset         = offsetof(struct servreg_state_updated_ind,
+					   transaction_id),
+	},
+	{}
+};
+
+struct servreg_set_ack_req {
+	char service_path[SERVREG_NAME_LENGTH + 1];
+	u16 transaction_id;
+};
+
+struct qmi_elem_info servreg_set_ack_req_ei[] = {
+	{
+		.data_type      = QMI_STRING,
+		.elem_len       = SERVREG_NAME_LENGTH + 1,
+		.elem_size      = sizeof(char),
+		.array_type	= NO_ARRAY,
+		.tlv_type       = 0x01,
+		.offset         = offsetof(struct servreg_set_ack_req,
+					   service_path),
+	},
+	{
+		.data_type      = QMI_UNSIGNED_2_BYTE,
+		.elem_len       = 1,
+		.elem_size      = sizeof(u16),
+		.array_type	= NO_ARRAY,
+		.tlv_type       = 0x02,
+		.offset         = offsetof(struct servreg_set_ack_req,
+					   transaction_id),
+	},
+	{}
+};
+
+struct servreg_set_ack_resp {
+	struct qmi_response_type_v01 resp;
+};
+
+struct qmi_elem_info servreg_set_ack_resp_ei[] = {
+	{
+		.data_type      = QMI_STRUCT,
+		.elem_len       = 1,
+		.elem_size      = sizeof(struct qmi_response_type_v01),
+		.array_type	= NO_ARRAY,
+		.tlv_type       = 0x02,
+		.offset         = offsetof(struct servreg_set_ack_resp,
+					   resp),
+		.ei_array       = qmi_response_type_v01_ei,
+	},
+	{}
+};
+
+#endif
diff --git a/drivers/soc/qcom/qcom_aoss.c b/drivers/soc/qcom/qcom_aoss.c
index 006ac40..f43a2e0 100644
--- a/drivers/soc/qcom/qcom_aoss.c
+++ b/drivers/soc/qcom/qcom_aoss.c
@@ -200,7 +200,7 @@ static irqreturn_t qmp_intr(int irq, void *data)
 {
 	struct qmp *qmp = data;
 
-	wake_up_interruptible_all(&qmp->event);
+	wake_up_all(&qmp->event);
 
 	return IRQ_HANDLED;
 }
@@ -225,6 +225,7 @@ static bool qmp_message_empty(struct qmp *qmp)
 static int qmp_send(struct qmp *qmp, const void *data, size_t len)
 {
 	long time_left;
+	size_t tlen;
 	int ret;
 
 	if (WARN_ON(len + sizeof(u32) > qmp->size))
@@ -239,6 +240,9 @@ static int qmp_send(struct qmp *qmp, const void *data, size_t len)
 	__iowrite32_copy(qmp->msgram + qmp->offset + sizeof(u32),
 			 data, len / sizeof(u32));
 	writel(len, qmp->msgram + qmp->offset);
+
+	/* Read back len to confirm data written in message RAM */
+	tlen = readl(qmp->msgram + qmp->offset);
 	qmp_kick(qmp);
 
 	time_left = wait_event_interruptible_timeout(qmp->event,
diff --git a/drivers/soc/qcom/rpmh-internal.h b/drivers/soc/qcom/rpmh-internal.h
index a7bbbb6..6eec32b 100644
--- a/drivers/soc/qcom/rpmh-internal.h
+++ b/drivers/soc/qcom/rpmh-internal.h
@@ -110,5 +110,6 @@ int rpmh_rsc_write_ctrl_data(struct rsc_drv *drv,
 int rpmh_rsc_invalidate(struct rsc_drv *drv);
 
 void rpmh_tx_done(const struct tcs_request *msg, int r);
+int rpmh_flush(struct rpmh_ctrlr *ctrlr);
 
 #endif /* __RPM_INTERNAL_H__ */
diff --git a/drivers/soc/qcom/rpmh-rsc.c b/drivers/soc/qcom/rpmh-rsc.c
index e278fc1..b718221 100644
--- a/drivers/soc/qcom/rpmh-rsc.c
+++ b/drivers/soc/qcom/rpmh-rsc.c
@@ -277,7 +277,7 @@ static void __tcs_buffer_write(struct rsc_drv *drv, int tcs_id, int cmd_id,
 		write_tcs_cmd(drv, RSC_DRV_CMD_MSGID, tcs_id, j, msgid);
 		write_tcs_cmd(drv, RSC_DRV_CMD_ADDR, tcs_id, j, cmd->addr);
 		write_tcs_cmd(drv, RSC_DRV_CMD_DATA, tcs_id, j, cmd->data);
-		trace_rpmh_send_msg(drv, tcs_id, j, msgid, cmd);
+		trace_rpmh_send_msg_rcuidle(drv, tcs_id, j, msgid, cmd);
 	}
 
 	write_tcs_reg(drv, RSC_DRV_CMD_WAIT_FOR_CMPL, tcs_id, cmd_complete);
diff --git a/drivers/soc/qcom/rpmh.c b/drivers/soc/qcom/rpmh.c
index 035091f..eb0ded0 100644
--- a/drivers/soc/qcom/rpmh.c
+++ b/drivers/soc/qcom/rpmh.c
@@ -23,7 +23,7 @@
 
 #define RPMH_TIMEOUT_MS			msecs_to_jiffies(10000)
 
-#define DEFINE_RPMH_MSG_ONSTACK(dev, s, q, name)	\
+#define DEFINE_RPMH_MSG_ONSTACK(device, s, q, name)	\
 	struct rpmh_request name = {			\
 		.msg = {				\
 			.state = s,			\
@@ -33,7 +33,7 @@
 		},					\
 		.cmd = { { 0 } },			\
 		.completion = q,			\
-		.dev = dev,				\
+		.dev = device,				\
 		.needs_free = false,				\
 	}
 
@@ -427,11 +427,10 @@ static int is_req_valid(struct cache_req *req)
 		req->sleep_val != req->wake_val);
 }
 
-static int send_single(const struct device *dev, enum rpmh_state state,
+static int send_single(struct rpmh_ctrlr *ctrlr, enum rpmh_state state,
 		       u32 addr, u32 data)
 {
-	DEFINE_RPMH_MSG_ONSTACK(dev, state, NULL, rpm_msg);
-	struct rpmh_ctrlr *ctrlr = get_rpmh_ctrlr(dev);
+	DEFINE_RPMH_MSG_ONSTACK(NULL, state, NULL, rpm_msg);
 
 	/* Wake sets are always complete and sleep sets are not */
 	rpm_msg.msg.wait_for_compl = (state == RPMH_WAKE_ONLY_STATE);
@@ -445,7 +444,7 @@ static int send_single(const struct device *dev, enum rpmh_state state,
 /**
  * rpmh_flush: Flushes the buffered active and sleep sets to TCS
  *
- * @dev: The device making the request
+ * @ctrlr: controller making request to flush cached data
  *
  * Return: -EBUSY if the controller is busy, probably waiting on a response
  * to a RPMH request sent earlier.
@@ -454,10 +453,9 @@ static int send_single(const struct device *dev, enum rpmh_state state,
  * that is powering down the entire system. Since no other RPMH API would be
  * executing at this time, it is safe to run lockless.
  */
-int rpmh_flush(const struct device *dev)
+int rpmh_flush(struct rpmh_ctrlr *ctrlr)
 {
 	struct cache_req *p;
-	struct rpmh_ctrlr *ctrlr = get_rpmh_ctrlr(dev);
 	int ret;
 
 	if (!ctrlr->dirty) {
@@ -480,11 +478,12 @@ int rpmh_flush(const struct device *dev)
 				 __func__, p->addr, p->sleep_val, p->wake_val);
 			continue;
 		}
-		ret = send_single(dev, RPMH_SLEEP_STATE, p->addr, p->sleep_val);
+		ret = send_single(ctrlr, RPMH_SLEEP_STATE, p->addr,
+				  p->sleep_val);
 		if (ret)
 			return ret;
-		ret = send_single(dev, RPMH_WAKE_ONLY_STATE,
-				  p->addr, p->wake_val);
+		ret = send_single(ctrlr, RPMH_WAKE_ONLY_STATE, p->addr,
+				  p->wake_val);
 		if (ret)
 			return ret;
 	}
@@ -493,7 +492,6 @@ int rpmh_flush(const struct device *dev)
 
 	return 0;
 }
-EXPORT_SYMBOL(rpmh_flush);
 
 /**
  * rpmh_invalidate: Invalidate all sleep and active sets
diff --git a/drivers/soc/qcom/socinfo.c b/drivers/soc/qcom/socinfo.c
index 7864b75..ebb49ae 100644
--- a/drivers/soc/qcom/socinfo.c
+++ b/drivers/soc/qcom/socinfo.c
@@ -277,7 +277,7 @@ static int show_image_##type(struct seq_file *seq, void *p)		  \
 {								  \
 	struct smem_image_version *image_version = seq->private;  \
 	seq_puts(seq, image_version->type);			  \
-	seq_puts(seq, "\n");					  \
+	seq_putc(seq, '\n');					  \
 	return 0;						  \
 }								  \
 static int open_image_##type(struct inode *inode, struct file *file)	  \
diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig
index ba2b8b5..1982c7f 100644
--- a/drivers/soc/renesas/Kconfig
+++ b/drivers/soc/renesas/Kconfig
@@ -116,6 +116,7 @@
 	bool "R-Car H1 (R8A77790)"
 	select ARCH_RCAR_GEN1
 	select ARM_ERRATA_754322
+	select ARM_GLOBAL_TIMER
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select SYSC_R8A7779
@@ -163,6 +164,7 @@
 	bool "SH-Mobile AG5 (R8A73A00)"
 	select ARCH_RMOBILE
 	select ARM_ERRATA_754322
+	select ARM_GLOBAL_TIMER
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select RENESAS_INTC_IRQPIN
@@ -193,19 +195,19 @@
 	  This enables support for the Renesas RZ/G2E SoC.
 
 config ARCH_R8A77950
-	bool
-
-config ARCH_R8A77951
-	bool
-
-config ARCH_R8A7795
-	bool "Renesas R-Car H3 SoC Platform"
-	select ARCH_R8A77950
-	select ARCH_R8A77951
+	bool "Renesas R-Car H3 ES1.x SoC Platform"
 	select ARCH_RCAR_GEN3
 	select SYSC_R8A7795
 	help
-	  This enables support for the Renesas R-Car H3 SoC.
+	  This enables support for the Renesas R-Car H3 SoC (revision 1.x).
+
+config ARCH_R8A77951
+	bool "Renesas R-Car H3 ES2.0+ SoC Platform"
+	select ARCH_RCAR_GEN3
+	select SYSC_R8A7795
+	help
+	  This enables support for the Renesas R-Car H3 SoC (revisions 2.0 and
+	  later).
 
 config ARCH_R8A77960
 	bool "Renesas R-Car M3-W SoC Platform"
diff --git a/drivers/soc/renesas/rcar-sysc.h b/drivers/soc/renesas/rcar-sysc.h
index 8d07448..0fc3b11 100644
--- a/drivers/soc/renesas/rcar-sysc.h
+++ b/drivers/soc/renesas/rcar-sysc.h
@@ -1,5 +1,5 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
  * Renesas R-Car System Controller
  *
  * Copyright (C) 2016 Glider bvba
diff --git a/drivers/soc/renesas/renesas-soc.c b/drivers/soc/renesas/renesas-soc.c
index 850f573..35dba8b 100644
--- a/drivers/soc/renesas/renesas-soc.c
+++ b/drivers/soc/renesas/renesas-soc.c
@@ -259,7 +259,7 @@ static const struct of_device_id renesas_socs[] __initconst = {
 #ifdef CONFIG_ARCH_R8A7794
 	{ .compatible = "renesas,r8a7794",	.data = &soc_rcar_e2 },
 #endif
-#ifdef CONFIG_ARCH_R8A7795
+#if defined(CONFIG_ARCH_R8A77950) || defined(CONFIG_ARCH_R8A77951)
 	{ .compatible = "renesas,r8a7795",	.data = &soc_rcar_h3 },
 #endif
 #ifdef CONFIG_ARCH_R8A77960
diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c
index 1699dda..1c533a9 100644
--- a/drivers/soc/tegra/pmc.c
+++ b/drivers/soc/tegra/pmc.c
@@ -3,7 +3,7 @@
  * drivers/soc/tegra/pmc.c
  *
  * Copyright (c) 2010 Google, Inc
- * Copyright (c) 2018, NVIDIA CORPORATION. All rights reserved.
+ * Copyright (c) 2018-2020, NVIDIA CORPORATION. All rights reserved.
  *
  * Author:
  *	Colin Cross <ccross@google.com>
@@ -13,9 +13,13 @@
 
 #include <linux/arm-smccc.h>
 #include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk/clk-conf.h>
 #include <linux/clk/tegra.h>
 #include <linux/debugfs.h>
 #include <linux/delay.h>
+#include <linux/device.h>
 #include <linux/err.h>
 #include <linux/export.h>
 #include <linux/init.h>
@@ -48,6 +52,7 @@
 #include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h>
 #include <dt-bindings/gpio/tegra186-gpio.h>
 #include <dt-bindings/gpio/tegra194-gpio.h>
+#include <dt-bindings/soc/tegra-pmc.h>
 
 #define PMC_CNTRL			0x0
 #define  PMC_CNTRL_INTR_POLARITY	BIT(17) /* inverts INTR polarity */
@@ -57,12 +62,15 @@
 #define  PMC_CNTRL_SYSCLK_OE		BIT(11) /* system clock enable */
 #define  PMC_CNTRL_SYSCLK_POLARITY	BIT(10) /* sys clk polarity */
 #define  PMC_CNTRL_PWRREQ_POLARITY	BIT(8)
+#define  PMC_CNTRL_BLINK_EN		7
 #define  PMC_CNTRL_MAIN_RST		BIT(4)
 
 #define PMC_WAKE_MASK			0x0c
 #define PMC_WAKE_LEVEL			0x10
 #define PMC_WAKE_STATUS			0x14
 #define PMC_SW_WAKE_STATUS		0x18
+#define PMC_DPD_PADS_ORIDE		0x1c
+#define  PMC_DPD_PADS_ORIDE_BLINK	20
 
 #define DPD_SAMPLE			0x020
 #define  DPD_SAMPLE_ENABLE		BIT(0)
@@ -75,6 +83,7 @@
 
 #define PWRGATE_STATUS			0x38
 
+#define PMC_BLINK_TIMER			0x40
 #define PMC_IMPL_E_33V_PWR		0x40
 
 #define PMC_PWR_DET			0x48
@@ -100,6 +109,8 @@
 #define PMC_WAKE2_STATUS		0x168
 #define PMC_SW_WAKE2_STATUS		0x16c
 
+#define PMC_CLK_OUT_CNTRL		0x1a8
+#define  PMC_CLK_OUT_MUX_MASK		GENMASK(1, 0)
 #define PMC_SENSOR_CTRL			0x1b0
 #define  PMC_SENSOR_CTRL_SCRATCH_WRITE	BIT(2)
 #define  PMC_SENSOR_CTRL_ENABLE_RST	BIT(1)
@@ -155,6 +166,71 @@
 #define  TEGRA_SMC_PMC_READ	0xaa
 #define  TEGRA_SMC_PMC_WRITE	0xbb
 
+struct pmc_clk {
+	struct clk_hw	hw;
+	unsigned long	offs;
+	u32		mux_shift;
+	u32		force_en_shift;
+};
+
+#define to_pmc_clk(_hw) container_of(_hw, struct pmc_clk, hw)
+
+struct pmc_clk_gate {
+	struct clk_hw	hw;
+	unsigned long	offs;
+	u32		shift;
+};
+
+#define to_pmc_clk_gate(_hw) container_of(_hw, struct pmc_clk_gate, hw)
+
+struct pmc_clk_init_data {
+	char *name;
+	const char *const *parents;
+	int num_parents;
+	int clk_id;
+	u8 mux_shift;
+	u8 force_en_shift;
+};
+
+static const char * const clk_out1_parents[] = { "osc", "osc_div2",
+	"osc_div4", "extern1",
+};
+
+static const char * const clk_out2_parents[] = { "osc", "osc_div2",
+	"osc_div4", "extern2",
+};
+
+static const char * const clk_out3_parents[] = { "osc", "osc_div2",
+	"osc_div4", "extern3",
+};
+
+static const struct pmc_clk_init_data tegra_pmc_clks_data[] = {
+	{
+		.name = "pmc_clk_out_1",
+		.parents = clk_out1_parents,
+		.num_parents = ARRAY_SIZE(clk_out1_parents),
+		.clk_id = TEGRA_PMC_CLK_OUT_1,
+		.mux_shift = 6,
+		.force_en_shift = 2,
+	},
+	{
+		.name = "pmc_clk_out_2",
+		.parents = clk_out2_parents,
+		.num_parents = ARRAY_SIZE(clk_out2_parents),
+		.clk_id = TEGRA_PMC_CLK_OUT_2,
+		.mux_shift = 14,
+		.force_en_shift = 10,
+	},
+	{
+		.name = "pmc_clk_out_3",
+		.parents = clk_out3_parents,
+		.num_parents = ARRAY_SIZE(clk_out3_parents),
+		.clk_id = TEGRA_PMC_CLK_OUT_3,
+		.mux_shift = 22,
+		.force_en_shift = 18,
+	},
+};
+
 struct tegra_powergate {
 	struct generic_pm_domain genpd;
 	struct tegra_pmc *pmc;
@@ -254,6 +330,10 @@ struct tegra_pmc_soc {
 	 */
 	const struct tegra_wake_event *wake_events;
 	unsigned int num_wake_events;
+
+	const struct pmc_clk_init_data *pmc_clks_data;
+	unsigned int num_pmc_clks;
+	bool has_blink_output;
 };
 
 static const char * const tegra186_reset_sources[] = {
@@ -2163,6 +2243,258 @@ static int tegra_pmc_clk_notify_cb(struct notifier_block *nb,
 	return NOTIFY_OK;
 }
 
+static void pmc_clk_fence_udelay(u32 offset)
+{
+	tegra_pmc_readl(pmc, offset);
+	/* pmc clk propagation delay 2 us */
+	udelay(2);
+}
+
+static u8 pmc_clk_mux_get_parent(struct clk_hw *hw)
+{
+	struct pmc_clk *clk = to_pmc_clk(hw);
+	u32 val;
+
+	val = tegra_pmc_readl(pmc, clk->offs) >> clk->mux_shift;
+	val &= PMC_CLK_OUT_MUX_MASK;
+
+	return val;
+}
+
+static int pmc_clk_mux_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct pmc_clk *clk = to_pmc_clk(hw);
+	u32 val;
+
+	val = tegra_pmc_readl(pmc, clk->offs);
+	val &= ~(PMC_CLK_OUT_MUX_MASK << clk->mux_shift);
+	val |= index << clk->mux_shift;
+	tegra_pmc_writel(pmc, val, clk->offs);
+	pmc_clk_fence_udelay(clk->offs);
+
+	return 0;
+}
+
+static int pmc_clk_is_enabled(struct clk_hw *hw)
+{
+	struct pmc_clk *clk = to_pmc_clk(hw);
+	u32 val;
+
+	val = tegra_pmc_readl(pmc, clk->offs) & BIT(clk->force_en_shift);
+
+	return val ? 1 : 0;
+}
+
+static void pmc_clk_set_state(unsigned long offs, u32 shift, int state)
+{
+	u32 val;
+
+	val = tegra_pmc_readl(pmc, offs);
+	val = state ? (val | BIT(shift)) : (val & ~BIT(shift));
+	tegra_pmc_writel(pmc, val, offs);
+	pmc_clk_fence_udelay(offs);
+}
+
+static int pmc_clk_enable(struct clk_hw *hw)
+{
+	struct pmc_clk *clk = to_pmc_clk(hw);
+
+	pmc_clk_set_state(clk->offs, clk->force_en_shift, 1);
+
+	return 0;
+}
+
+static void pmc_clk_disable(struct clk_hw *hw)
+{
+	struct pmc_clk *clk = to_pmc_clk(hw);
+
+	pmc_clk_set_state(clk->offs, clk->force_en_shift, 0);
+}
+
+static const struct clk_ops pmc_clk_ops = {
+	.get_parent = pmc_clk_mux_get_parent,
+	.set_parent = pmc_clk_mux_set_parent,
+	.determine_rate = __clk_mux_determine_rate,
+	.is_enabled = pmc_clk_is_enabled,
+	.enable = pmc_clk_enable,
+	.disable = pmc_clk_disable,
+};
+
+static struct clk *
+tegra_pmc_clk_out_register(struct tegra_pmc *pmc,
+			   const struct pmc_clk_init_data *data,
+			   unsigned long offset)
+{
+	struct clk_init_data init;
+	struct pmc_clk *pmc_clk;
+
+	pmc_clk = devm_kzalloc(pmc->dev, sizeof(*pmc_clk), GFP_KERNEL);
+	if (!pmc_clk)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = data->name;
+	init.ops = &pmc_clk_ops;
+	init.parent_names = data->parents;
+	init.num_parents = data->num_parents;
+	init.flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT |
+		     CLK_SET_PARENT_GATE;
+
+	pmc_clk->hw.init = &init;
+	pmc_clk->offs = offset;
+	pmc_clk->mux_shift = data->mux_shift;
+	pmc_clk->force_en_shift = data->force_en_shift;
+
+	return clk_register(NULL, &pmc_clk->hw);
+}
+
+static int pmc_clk_gate_is_enabled(struct clk_hw *hw)
+{
+	struct pmc_clk_gate *gate = to_pmc_clk_gate(hw);
+
+	return tegra_pmc_readl(pmc, gate->offs) & BIT(gate->shift) ? 1 : 0;
+}
+
+static int pmc_clk_gate_enable(struct clk_hw *hw)
+{
+	struct pmc_clk_gate *gate = to_pmc_clk_gate(hw);
+
+	pmc_clk_set_state(gate->offs, gate->shift, 1);
+
+	return 0;
+}
+
+static void pmc_clk_gate_disable(struct clk_hw *hw)
+{
+	struct pmc_clk_gate *gate = to_pmc_clk_gate(hw);
+
+	pmc_clk_set_state(gate->offs, gate->shift, 0);
+}
+
+static const struct clk_ops pmc_clk_gate_ops = {
+	.is_enabled = pmc_clk_gate_is_enabled,
+	.enable = pmc_clk_gate_enable,
+	.disable = pmc_clk_gate_disable,
+};
+
+static struct clk *
+tegra_pmc_clk_gate_register(struct tegra_pmc *pmc, const char *name,
+			    const char *parent_name, unsigned long offset,
+			    u32 shift)
+{
+	struct clk_init_data init;
+	struct pmc_clk_gate *gate;
+
+	gate = devm_kzalloc(pmc->dev, sizeof(*gate), GFP_KERNEL);
+	if (!gate)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &pmc_clk_gate_ops;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+	init.flags = 0;
+
+	gate->hw.init = &init;
+	gate->offs = offset;
+	gate->shift = shift;
+
+	return clk_register(NULL, &gate->hw);
+}
+
+static void tegra_pmc_clock_register(struct tegra_pmc *pmc,
+				     struct device_node *np)
+{
+	struct clk *clk;
+	struct clk_onecell_data *clk_data;
+	unsigned int num_clks;
+	int i, err;
+
+	num_clks = pmc->soc->num_pmc_clks;
+	if (pmc->soc->has_blink_output)
+		num_clks += 1;
+
+	if (!num_clks)
+		return;
+
+	clk_data = devm_kmalloc(pmc->dev, sizeof(*clk_data), GFP_KERNEL);
+	if (!clk_data)
+		return;
+
+	clk_data->clks = devm_kcalloc(pmc->dev, TEGRA_PMC_CLK_MAX,
+				      sizeof(*clk_data->clks), GFP_KERNEL);
+	if (!clk_data->clks)
+		return;
+
+	clk_data->clk_num = TEGRA_PMC_CLK_MAX;
+
+	for (i = 0; i < TEGRA_PMC_CLK_MAX; i++)
+		clk_data->clks[i] = ERR_PTR(-ENOENT);
+
+	for (i = 0; i < pmc->soc->num_pmc_clks; i++) {
+		const struct pmc_clk_init_data *data;
+
+		data = pmc->soc->pmc_clks_data + i;
+
+		clk = tegra_pmc_clk_out_register(pmc, data, PMC_CLK_OUT_CNTRL);
+		if (IS_ERR(clk)) {
+			dev_warn(pmc->dev, "unable to register clock %s: %d\n",
+				 data->name, PTR_ERR_OR_ZERO(clk));
+			return;
+		}
+
+		err = clk_register_clkdev(clk, data->name, NULL);
+		if (err) {
+			dev_warn(pmc->dev,
+				 "unable to register %s clock lookup: %d\n",
+				 data->name, err);
+			return;
+		}
+
+		clk_data->clks[data->clk_id] = clk;
+	}
+
+	if (pmc->soc->has_blink_output) {
+		tegra_pmc_writel(pmc, 0x0, PMC_BLINK_TIMER);
+		clk = tegra_pmc_clk_gate_register(pmc,
+						  "pmc_blink_override",
+						  "clk_32k",
+						  PMC_DPD_PADS_ORIDE,
+						  PMC_DPD_PADS_ORIDE_BLINK);
+		if (IS_ERR(clk)) {
+			dev_warn(pmc->dev,
+				 "unable to register pmc_blink_override: %d\n",
+				 PTR_ERR_OR_ZERO(clk));
+			return;
+		}
+
+		clk = tegra_pmc_clk_gate_register(pmc, "pmc_blink",
+						  "pmc_blink_override",
+						  PMC_CNTRL,
+						  PMC_CNTRL_BLINK_EN);
+		if (IS_ERR(clk)) {
+			dev_warn(pmc->dev,
+				 "unable to register pmc_blink: %d\n",
+				 PTR_ERR_OR_ZERO(clk));
+			return;
+		}
+
+		err = clk_register_clkdev(clk, "pmc_blink", NULL);
+		if (err) {
+			dev_warn(pmc->dev,
+				 "unable to register pmc_blink lookup: %d\n",
+				 err);
+			return;
+		}
+
+		clk_data->clks[TEGRA_PMC_CLK_BLINK] = clk;
+	}
+
+	err = of_clk_add_provider(np, of_clk_src_onecell_get, clk_data);
+	if (err)
+		dev_warn(pmc->dev, "failed to add pmc clock provider: %d\n",
+			 err);
+}
+
 static int tegra_pmc_probe(struct platform_device *pdev)
 {
 	void __iomem *base;
@@ -2281,6 +2613,7 @@ static int tegra_pmc_probe(struct platform_device *pdev)
 	pmc->base = base;
 	mutex_unlock(&pmc->powergates_lock);
 
+	tegra_pmc_clock_register(pmc, pdev->dev.of_node);
 	platform_set_drvdata(pdev, pmc);
 
 	return 0;
@@ -2422,6 +2755,9 @@ static const struct tegra_pmc_soc tegra20_pmc_soc = {
 	.num_reset_sources = 0,
 	.reset_levels = NULL,
 	.num_reset_levels = 0,
+	.pmc_clks_data = NULL,
+	.num_pmc_clks = 0,
+	.has_blink_output = true,
 };
 
 static const char * const tegra30_powergates[] = {
@@ -2469,6 +2805,9 @@ static const struct tegra_pmc_soc tegra30_pmc_soc = {
 	.num_reset_sources = ARRAY_SIZE(tegra30_reset_sources),
 	.reset_levels = NULL,
 	.num_reset_levels = 0,
+	.pmc_clks_data = tegra_pmc_clks_data,
+	.num_pmc_clks = ARRAY_SIZE(tegra_pmc_clks_data),
+	.has_blink_output = true,
 };
 
 static const char * const tegra114_powergates[] = {
@@ -2520,6 +2859,9 @@ static const struct tegra_pmc_soc tegra114_pmc_soc = {
 	.num_reset_sources = ARRAY_SIZE(tegra30_reset_sources),
 	.reset_levels = NULL,
 	.num_reset_levels = 0,
+	.pmc_clks_data = tegra_pmc_clks_data,
+	.num_pmc_clks = ARRAY_SIZE(tegra_pmc_clks_data),
+	.has_blink_output = true,
 };
 
 static const char * const tegra124_powergates[] = {
@@ -2569,38 +2911,38 @@ static const u8 tegra124_cpu_powergates[] = {
 		.name	= (_name)			\
 	})
 
-#define TEGRA124_IO_PAD_TABLE(_pad)					\
-	/* .id                          .dpd    .voltage  .name	*/	\
-	_pad(TEGRA_IO_PAD_AUDIO,	17,	UINT_MAX, "audio"),	\
-	_pad(TEGRA_IO_PAD_BB,		15,	UINT_MAX, "bb"),	\
-	_pad(TEGRA_IO_PAD_CAM,		36,	UINT_MAX, "cam"),	\
-	_pad(TEGRA_IO_PAD_COMP,		22,	UINT_MAX, "comp"),	\
-	_pad(TEGRA_IO_PAD_CSIA,		0,	UINT_MAX, "csia"),	\
-	_pad(TEGRA_IO_PAD_CSIB,		1,	UINT_MAX, "csb"),	\
-	_pad(TEGRA_IO_PAD_CSIE,		44,	UINT_MAX, "cse"),	\
-	_pad(TEGRA_IO_PAD_DSI,		2,	UINT_MAX, "dsi"),	\
-	_pad(TEGRA_IO_PAD_DSIB,		39,	UINT_MAX, "dsib"),	\
-	_pad(TEGRA_IO_PAD_DSIC,		40,	UINT_MAX, "dsic"),	\
-	_pad(TEGRA_IO_PAD_DSID,		41,	UINT_MAX, "dsid"),	\
-	_pad(TEGRA_IO_PAD_HDMI,		28,	UINT_MAX, "hdmi"),	\
-	_pad(TEGRA_IO_PAD_HSIC,		19,	UINT_MAX, "hsic"),	\
-	_pad(TEGRA_IO_PAD_HV,		38,	UINT_MAX, "hv"),	\
-	_pad(TEGRA_IO_PAD_LVDS,		57,	UINT_MAX, "lvds"),	\
-	_pad(TEGRA_IO_PAD_MIPI_BIAS,	3,	UINT_MAX, "mipi-bias"),	\
-	_pad(TEGRA_IO_PAD_NAND,		13,	UINT_MAX, "nand"),	\
-	_pad(TEGRA_IO_PAD_PEX_BIAS,	4,	UINT_MAX, "pex-bias"),	\
-	_pad(TEGRA_IO_PAD_PEX_CLK1,	5,	UINT_MAX, "pex-clk1"),	\
-	_pad(TEGRA_IO_PAD_PEX_CLK2,	6,	UINT_MAX, "pex-clk2"),	\
-	_pad(TEGRA_IO_PAD_PEX_CNTRL,	32,	UINT_MAX, "pex-cntrl"),	\
-	_pad(TEGRA_IO_PAD_SDMMC1,	33,	UINT_MAX, "sdmmc1"),	\
-	_pad(TEGRA_IO_PAD_SDMMC3,	34,	UINT_MAX, "sdmmc3"),	\
-	_pad(TEGRA_IO_PAD_SDMMC4,	35,	UINT_MAX, "sdmmc4"),	\
-	_pad(TEGRA_IO_PAD_SYS_DDC,	58,	UINT_MAX, "sys_ddc"),	\
-	_pad(TEGRA_IO_PAD_UART,		14,	UINT_MAX, "uart"),	\
-	_pad(TEGRA_IO_PAD_USB0,		9,	UINT_MAX, "usb0"),	\
-	_pad(TEGRA_IO_PAD_USB1,		10,	UINT_MAX, "usb1"),	\
-	_pad(TEGRA_IO_PAD_USB2,		11,	UINT_MAX, "usb2"),	\
-	_pad(TEGRA_IO_PAD_USB_BIAS,	12,	UINT_MAX, "usb_bias")
+#define TEGRA124_IO_PAD_TABLE(_pad)                                   \
+	/* .id                          .dpd  .voltage  .name */      \
+	_pad(TEGRA_IO_PAD_AUDIO,        17,   UINT_MAX, "audio"),     \
+	_pad(TEGRA_IO_PAD_BB,           15,   UINT_MAX, "bb"),        \
+	_pad(TEGRA_IO_PAD_CAM,          36,   UINT_MAX, "cam"),       \
+	_pad(TEGRA_IO_PAD_COMP,         22,   UINT_MAX, "comp"),      \
+	_pad(TEGRA_IO_PAD_CSIA,         0,    UINT_MAX, "csia"),      \
+	_pad(TEGRA_IO_PAD_CSIB,         1,    UINT_MAX, "csb"),       \
+	_pad(TEGRA_IO_PAD_CSIE,         44,   UINT_MAX, "cse"),       \
+	_pad(TEGRA_IO_PAD_DSI,          2,    UINT_MAX, "dsi"),       \
+	_pad(TEGRA_IO_PAD_DSIB,         39,   UINT_MAX, "dsib"),      \
+	_pad(TEGRA_IO_PAD_DSIC,         40,   UINT_MAX, "dsic"),      \
+	_pad(TEGRA_IO_PAD_DSID,         41,   UINT_MAX, "dsid"),      \
+	_pad(TEGRA_IO_PAD_HDMI,         28,   UINT_MAX, "hdmi"),      \
+	_pad(TEGRA_IO_PAD_HSIC,         19,   UINT_MAX, "hsic"),      \
+	_pad(TEGRA_IO_PAD_HV,           38,   UINT_MAX, "hv"),        \
+	_pad(TEGRA_IO_PAD_LVDS,         57,   UINT_MAX, "lvds"),      \
+	_pad(TEGRA_IO_PAD_MIPI_BIAS,    3,    UINT_MAX, "mipi-bias"), \
+	_pad(TEGRA_IO_PAD_NAND,         13,   UINT_MAX, "nand"),      \
+	_pad(TEGRA_IO_PAD_PEX_BIAS,     4,    UINT_MAX, "pex-bias"),  \
+	_pad(TEGRA_IO_PAD_PEX_CLK1,     5,    UINT_MAX, "pex-clk1"),  \
+	_pad(TEGRA_IO_PAD_PEX_CLK2,     6,    UINT_MAX, "pex-clk2"),  \
+	_pad(TEGRA_IO_PAD_PEX_CNTRL,    32,   UINT_MAX, "pex-cntrl"), \
+	_pad(TEGRA_IO_PAD_SDMMC1,       33,   UINT_MAX, "sdmmc1"),    \
+	_pad(TEGRA_IO_PAD_SDMMC3,       34,   UINT_MAX, "sdmmc3"),    \
+	_pad(TEGRA_IO_PAD_SDMMC4,       35,   UINT_MAX, "sdmmc4"),    \
+	_pad(TEGRA_IO_PAD_SYS_DDC,      58,   UINT_MAX, "sys_ddc"),   \
+	_pad(TEGRA_IO_PAD_UART,         14,   UINT_MAX, "uart"),      \
+	_pad(TEGRA_IO_PAD_USB0,         9,    UINT_MAX, "usb0"),      \
+	_pad(TEGRA_IO_PAD_USB1,         10,   UINT_MAX, "usb1"),      \
+	_pad(TEGRA_IO_PAD_USB2,         11,   UINT_MAX, "usb2"),      \
+	_pad(TEGRA_IO_PAD_USB_BIAS,     12,   UINT_MAX, "usb_bias")
 
 static const struct tegra_io_pad_soc tegra124_io_pads[] = {
 	TEGRA124_IO_PAD_TABLE(TEGRA_IO_PAD)
@@ -2631,6 +2973,9 @@ static const struct tegra_pmc_soc tegra124_pmc_soc = {
 	.num_reset_sources = ARRAY_SIZE(tegra30_reset_sources),
 	.reset_levels = NULL,
 	.num_reset_levels = 0,
+	.pmc_clks_data = tegra_pmc_clks_data,
+	.num_pmc_clks = ARRAY_SIZE(tegra_pmc_clks_data),
+	.has_blink_output = true,
 };
 
 static const char * const tegra210_powergates[] = {
@@ -2667,46 +3012,46 @@ static const u8 tegra210_cpu_powergates[] = {
 	TEGRA_POWERGATE_CPU3,
 };
 
-#define TEGRA210_IO_PAD_TABLE(_pad)					   \
-	/*   .id                        .dpd     .voltage  .name */	   \
-	_pad(TEGRA_IO_PAD_AUDIO,       17,	 5,	   "audio"),	   \
-	_pad(TEGRA_IO_PAD_AUDIO_HV,    61,	 18,	   "audio-hv"),	   \
-	_pad(TEGRA_IO_PAD_CAM,	       36,	 10,	   "cam"),	   \
-	_pad(TEGRA_IO_PAD_CSIA,	       0,	 UINT_MAX, "csia"),	   \
-	_pad(TEGRA_IO_PAD_CSIB,	       1,	 UINT_MAX, "csib"),	   \
-	_pad(TEGRA_IO_PAD_CSIC,	       42,	 UINT_MAX, "csic"),	   \
-	_pad(TEGRA_IO_PAD_CSID,	       43,	 UINT_MAX, "csid"),	   \
-	_pad(TEGRA_IO_PAD_CSIE,	       44,	 UINT_MAX, "csie"),	   \
-	_pad(TEGRA_IO_PAD_CSIF,	       45,	 UINT_MAX, "csif"),	   \
-	_pad(TEGRA_IO_PAD_DBG,	       25,	 19,	   "dbg"),	   \
-	_pad(TEGRA_IO_PAD_DEBUG_NONAO, 26,	 UINT_MAX, "debug-nonao"), \
-	_pad(TEGRA_IO_PAD_DMIC,	       50,	 20,	   "dmic"),	   \
-	_pad(TEGRA_IO_PAD_DP,	       51,	 UINT_MAX, "dp"),	   \
-	_pad(TEGRA_IO_PAD_DSI,	       2,	 UINT_MAX, "dsi"),	   \
-	_pad(TEGRA_IO_PAD_DSIB,	       39,	 UINT_MAX, "dsib"),	   \
-	_pad(TEGRA_IO_PAD_DSIC,	       40,	 UINT_MAX, "dsic"),	   \
-	_pad(TEGRA_IO_PAD_DSID,	       41,	 UINT_MAX, "dsid"),	   \
-	_pad(TEGRA_IO_PAD_EMMC,	       35,	 UINT_MAX, "emmc"),	   \
-	_pad(TEGRA_IO_PAD_EMMC2,       37,	 UINT_MAX, "emmc2"),	   \
-	_pad(TEGRA_IO_PAD_GPIO,	       27,	 21,	   "gpio"),	   \
-	_pad(TEGRA_IO_PAD_HDMI,	       28,	 UINT_MAX, "hdmi"),	   \
-	_pad(TEGRA_IO_PAD_HSIC,	       19,	 UINT_MAX, "hsic"),	   \
-	_pad(TEGRA_IO_PAD_LVDS,	       57,	 UINT_MAX, "lvds"),	   \
-	_pad(TEGRA_IO_PAD_MIPI_BIAS,   3,	 UINT_MAX, "mipi-bias"),   \
-	_pad(TEGRA_IO_PAD_PEX_BIAS,    4,	 UINT_MAX, "pex-bias"),    \
-	_pad(TEGRA_IO_PAD_PEX_CLK1,    5,	 UINT_MAX, "pex-clk1"),    \
-	_pad(TEGRA_IO_PAD_PEX_CLK2,    6,	 UINT_MAX, "pex-clk2"),    \
-	_pad(TEGRA_IO_PAD_PEX_CNTRL,   UINT_MAX, 11,	   "pex-cntrl"),   \
-	_pad(TEGRA_IO_PAD_SDMMC1,      33,	 12,	   "sdmmc1"),	   \
-	_pad(TEGRA_IO_PAD_SDMMC3,      34,	 13,	   "sdmmc3"),	   \
-	_pad(TEGRA_IO_PAD_SPI,	       46,	 22,	   "spi"),	   \
-	_pad(TEGRA_IO_PAD_SPI_HV,      47,	 23,	   "spi-hv"),	   \
-	_pad(TEGRA_IO_PAD_UART,	       14,	 2,	   "uart"),	   \
-	_pad(TEGRA_IO_PAD_USB0,	       9,	 UINT_MAX, "usb0"),	   \
-	_pad(TEGRA_IO_PAD_USB1,	       10,	 UINT_MAX, "usb1"),	   \
-	_pad(TEGRA_IO_PAD_USB2,	       11,	 UINT_MAX, "usb2"),	   \
-	_pad(TEGRA_IO_PAD_USB3,	       18,	 UINT_MAX, "usb3"),	   \
-	_pad(TEGRA_IO_PAD_USB_BIAS,    12,	 UINT_MAX, "usb-bias")
+#define TEGRA210_IO_PAD_TABLE(_pad)                                        \
+	/*   .id                        .dpd     .voltage  .name */        \
+	_pad(TEGRA_IO_PAD_AUDIO,       17,       5,        "audio"),       \
+	_pad(TEGRA_IO_PAD_AUDIO_HV,    61,       18,       "audio-hv"),    \
+	_pad(TEGRA_IO_PAD_CAM,         36,       10,       "cam"),         \
+	_pad(TEGRA_IO_PAD_CSIA,        0,        UINT_MAX, "csia"),        \
+	_pad(TEGRA_IO_PAD_CSIB,        1,        UINT_MAX, "csib"),        \
+	_pad(TEGRA_IO_PAD_CSIC,        42,       UINT_MAX, "csic"),        \
+	_pad(TEGRA_IO_PAD_CSID,        43,       UINT_MAX, "csid"),        \
+	_pad(TEGRA_IO_PAD_CSIE,        44,       UINT_MAX, "csie"),        \
+	_pad(TEGRA_IO_PAD_CSIF,        45,       UINT_MAX, "csif"),        \
+	_pad(TEGRA_IO_PAD_DBG,         25,       19,       "dbg"),         \
+	_pad(TEGRA_IO_PAD_DEBUG_NONAO, 26,       UINT_MAX, "debug-nonao"), \
+	_pad(TEGRA_IO_PAD_DMIC,        50,       20,       "dmic"),        \
+	_pad(TEGRA_IO_PAD_DP,          51,       UINT_MAX, "dp"),          \
+	_pad(TEGRA_IO_PAD_DSI,         2,        UINT_MAX, "dsi"),         \
+	_pad(TEGRA_IO_PAD_DSIB,        39,       UINT_MAX, "dsib"),        \
+	_pad(TEGRA_IO_PAD_DSIC,        40,       UINT_MAX, "dsic"),        \
+	_pad(TEGRA_IO_PAD_DSID,        41,       UINT_MAX, "dsid"),        \
+	_pad(TEGRA_IO_PAD_EMMC,        35,       UINT_MAX, "emmc"),        \
+	_pad(TEGRA_IO_PAD_EMMC2,       37,       UINT_MAX, "emmc2"),       \
+	_pad(TEGRA_IO_PAD_GPIO,        27,       21,       "gpio"),        \
+	_pad(TEGRA_IO_PAD_HDMI,        28,       UINT_MAX, "hdmi"),        \
+	_pad(TEGRA_IO_PAD_HSIC,        19,       UINT_MAX, "hsic"),        \
+	_pad(TEGRA_IO_PAD_LVDS,        57,       UINT_MAX, "lvds"),        \
+	_pad(TEGRA_IO_PAD_MIPI_BIAS,   3,        UINT_MAX, "mipi-bias"),   \
+	_pad(TEGRA_IO_PAD_PEX_BIAS,    4,        UINT_MAX, "pex-bias"),    \
+	_pad(TEGRA_IO_PAD_PEX_CLK1,    5,        UINT_MAX, "pex-clk1"),    \
+	_pad(TEGRA_IO_PAD_PEX_CLK2,    6,        UINT_MAX, "pex-clk2"),    \
+	_pad(TEGRA_IO_PAD_PEX_CNTRL,   UINT_MAX, 11,       "pex-cntrl"),   \
+	_pad(TEGRA_IO_PAD_SDMMC1,      33,       12,       "sdmmc1"),      \
+	_pad(TEGRA_IO_PAD_SDMMC3,      34,       13,       "sdmmc3"),      \
+	_pad(TEGRA_IO_PAD_SPI,         46,       22,       "spi"),         \
+	_pad(TEGRA_IO_PAD_SPI_HV,      47,       23,       "spi-hv"),      \
+	_pad(TEGRA_IO_PAD_UART,        14,       2,        "uart"),        \
+	_pad(TEGRA_IO_PAD_USB0,        9,        UINT_MAX, "usb0"),        \
+	_pad(TEGRA_IO_PAD_USB1,        10,       UINT_MAX, "usb1"),        \
+	_pad(TEGRA_IO_PAD_USB2,        11,       UINT_MAX, "usb2"),        \
+	_pad(TEGRA_IO_PAD_USB3,        18,       UINT_MAX, "usb3"),        \
+	_pad(TEGRA_IO_PAD_USB_BIAS,    12,       UINT_MAX, "usb-bias")
 
 static const struct tegra_io_pad_soc tegra210_io_pads[] = {
 	TEGRA210_IO_PAD_TABLE(TEGRA_IO_PAD)
@@ -2745,48 +3090,51 @@ static const struct tegra_pmc_soc tegra210_pmc_soc = {
 	.num_reset_levels = 0,
 	.num_wake_events = ARRAY_SIZE(tegra210_wake_events),
 	.wake_events = tegra210_wake_events,
+	.pmc_clks_data = tegra_pmc_clks_data,
+	.num_pmc_clks = ARRAY_SIZE(tegra_pmc_clks_data),
+	.has_blink_output = true,
 };
 
-#define TEGRA186_IO_PAD_TABLE(_pad)					     \
-	/*   .id                        .dpd      .voltage  .name */	     \
-	_pad(TEGRA_IO_PAD_CSIA,		0,	  UINT_MAX, "csia"),	     \
-	_pad(TEGRA_IO_PAD_CSIB,		1,	  UINT_MAX, "csib"),	     \
-	_pad(TEGRA_IO_PAD_DSI,		2,	  UINT_MAX, "dsi"),	     \
-	_pad(TEGRA_IO_PAD_MIPI_BIAS,	3,	  UINT_MAX, "mipi-bias"),    \
-	_pad(TEGRA_IO_PAD_PEX_CLK_BIAS,	4,	  UINT_MAX, "pex-clk-bias"), \
-	_pad(TEGRA_IO_PAD_PEX_CLK3,	5,	  UINT_MAX, "pex-clk3"),     \
-	_pad(TEGRA_IO_PAD_PEX_CLK2,	6,	  UINT_MAX, "pex-clk2"),     \
-	_pad(TEGRA_IO_PAD_PEX_CLK1,	7,	  UINT_MAX, "pex-clk1"),     \
-	_pad(TEGRA_IO_PAD_USB0,		9,	  UINT_MAX, "usb0"),	     \
-	_pad(TEGRA_IO_PAD_USB1,		10,	  UINT_MAX, "usb1"),	     \
-	_pad(TEGRA_IO_PAD_USB2,		11,	  UINT_MAX, "usb2"),	     \
-	_pad(TEGRA_IO_PAD_USB_BIAS,	12,	  UINT_MAX, "usb-bias"),     \
-	_pad(TEGRA_IO_PAD_UART,		14,	  UINT_MAX, "uart"),	     \
-	_pad(TEGRA_IO_PAD_AUDIO,	17,	  UINT_MAX, "audio"),	     \
-	_pad(TEGRA_IO_PAD_HSIC,		19,	  UINT_MAX, "hsic"),	     \
-	_pad(TEGRA_IO_PAD_DBG,		25,	  UINT_MAX, "dbg"),	     \
-	_pad(TEGRA_IO_PAD_HDMI_DP0,	28,	  UINT_MAX, "hdmi-dp0"),     \
-	_pad(TEGRA_IO_PAD_HDMI_DP1,	29,	  UINT_MAX, "hdmi-dp1"),     \
-	_pad(TEGRA_IO_PAD_PEX_CNTRL,	32,	  UINT_MAX, "pex-cntrl"),    \
-	_pad(TEGRA_IO_PAD_SDMMC2_HV,	34,	  5,	    "sdmmc2-hv"),    \
-	_pad(TEGRA_IO_PAD_SDMMC4,	36,	  UINT_MAX, "sdmmc4"),	     \
-	_pad(TEGRA_IO_PAD_CAM,		38,	  UINT_MAX, "cam"),	     \
-	_pad(TEGRA_IO_PAD_DSIB,		40,	  UINT_MAX, "dsib"),	     \
-	_pad(TEGRA_IO_PAD_DSIC,		41,	  UINT_MAX, "dsic"),	     \
-	_pad(TEGRA_IO_PAD_DSID,		42,	  UINT_MAX, "dsid"),	     \
-	_pad(TEGRA_IO_PAD_CSIC,		43,	  UINT_MAX, "csic"),	     \
-	_pad(TEGRA_IO_PAD_CSID,		44,	  UINT_MAX, "csid"),	     \
-	_pad(TEGRA_IO_PAD_CSIE,		45,	  UINT_MAX, "csie"),	     \
-	_pad(TEGRA_IO_PAD_CSIF,		46,	  UINT_MAX, "csif"),	     \
-	_pad(TEGRA_IO_PAD_SPI,		47,	  UINT_MAX, "spi"),	     \
-	_pad(TEGRA_IO_PAD_UFS,		49,	  UINT_MAX, "ufs"),	     \
-	_pad(TEGRA_IO_PAD_DMIC_HV,	52,	  2,	    "dmic-hv"),	     \
-	_pad(TEGRA_IO_PAD_EDP,		53,	  UINT_MAX, "edp"),	     \
-	_pad(TEGRA_IO_PAD_SDMMC1_HV,	55,	  4,	    "sdmmc1-hv"),    \
-	_pad(TEGRA_IO_PAD_SDMMC3_HV,	56,	  6,	    "sdmmc3-hv"),    \
-	_pad(TEGRA_IO_PAD_CONN,		60,	  UINT_MAX, "conn"),	     \
-	_pad(TEGRA_IO_PAD_AUDIO_HV,	61,	  1,	    "audio-hv"),     \
-	_pad(TEGRA_IO_PAD_AO_HV,	UINT_MAX, 0,	    "ao-hv")
+#define TEGRA186_IO_PAD_TABLE(_pad)                                          \
+	/*   .id                        .dpd      .voltage  .name */         \
+	_pad(TEGRA_IO_PAD_CSIA,         0,        UINT_MAX, "csia"),         \
+	_pad(TEGRA_IO_PAD_CSIB,         1,        UINT_MAX, "csib"),         \
+	_pad(TEGRA_IO_PAD_DSI,          2,        UINT_MAX, "dsi"),          \
+	_pad(TEGRA_IO_PAD_MIPI_BIAS,    3,        UINT_MAX, "mipi-bias"),    \
+	_pad(TEGRA_IO_PAD_PEX_CLK_BIAS, 4,        UINT_MAX, "pex-clk-bias"), \
+	_pad(TEGRA_IO_PAD_PEX_CLK3,     5,        UINT_MAX, "pex-clk3"),     \
+	_pad(TEGRA_IO_PAD_PEX_CLK2,     6,        UINT_MAX, "pex-clk2"),     \
+	_pad(TEGRA_IO_PAD_PEX_CLK1,     7,        UINT_MAX, "pex-clk1"),     \
+	_pad(TEGRA_IO_PAD_USB0,         9,        UINT_MAX, "usb0"),         \
+	_pad(TEGRA_IO_PAD_USB1,         10,       UINT_MAX, "usb1"),         \
+	_pad(TEGRA_IO_PAD_USB2,         11,       UINT_MAX, "usb2"),         \
+	_pad(TEGRA_IO_PAD_USB_BIAS,     12,       UINT_MAX, "usb-bias"),     \
+	_pad(TEGRA_IO_PAD_UART,         14,       UINT_MAX, "uart"),         \
+	_pad(TEGRA_IO_PAD_AUDIO,        17,       UINT_MAX, "audio"),        \
+	_pad(TEGRA_IO_PAD_HSIC,         19,       UINT_MAX, "hsic"),         \
+	_pad(TEGRA_IO_PAD_DBG,          25,       UINT_MAX, "dbg"),          \
+	_pad(TEGRA_IO_PAD_HDMI_DP0,     28,       UINT_MAX, "hdmi-dp0"),     \
+	_pad(TEGRA_IO_PAD_HDMI_DP1,     29,       UINT_MAX, "hdmi-dp1"),     \
+	_pad(TEGRA_IO_PAD_PEX_CNTRL,    32,       UINT_MAX, "pex-cntrl"),    \
+	_pad(TEGRA_IO_PAD_SDMMC2_HV,    34,       5,        "sdmmc2-hv"),    \
+	_pad(TEGRA_IO_PAD_SDMMC4,       36,       UINT_MAX, "sdmmc4"),       \
+	_pad(TEGRA_IO_PAD_CAM,          38,       UINT_MAX, "cam"),          \
+	_pad(TEGRA_IO_PAD_DSIB,         40,       UINT_MAX, "dsib"),         \
+	_pad(TEGRA_IO_PAD_DSIC,         41,       UINT_MAX, "dsic"),         \
+	_pad(TEGRA_IO_PAD_DSID,         42,       UINT_MAX, "dsid"),         \
+	_pad(TEGRA_IO_PAD_CSIC,         43,       UINT_MAX, "csic"),         \
+	_pad(TEGRA_IO_PAD_CSID,         44,       UINT_MAX, "csid"),         \
+	_pad(TEGRA_IO_PAD_CSIE,         45,       UINT_MAX, "csie"),         \
+	_pad(TEGRA_IO_PAD_CSIF,         46,       UINT_MAX, "csif"),         \
+	_pad(TEGRA_IO_PAD_SPI,          47,       UINT_MAX, "spi"),          \
+	_pad(TEGRA_IO_PAD_UFS,          49,       UINT_MAX, "ufs"),          \
+	_pad(TEGRA_IO_PAD_DMIC_HV,      52,       2,        "dmic-hv"),	     \
+	_pad(TEGRA_IO_PAD_EDP,          53,       UINT_MAX, "edp"),          \
+	_pad(TEGRA_IO_PAD_SDMMC1_HV,    55,       4,        "sdmmc1-hv"),    \
+	_pad(TEGRA_IO_PAD_SDMMC3_HV,    56,       6,        "sdmmc3-hv"),    \
+	_pad(TEGRA_IO_PAD_CONN,         60,       UINT_MAX, "conn"),         \
+	_pad(TEGRA_IO_PAD_AUDIO_HV,     61,       1,        "audio-hv"),     \
+	_pad(TEGRA_IO_PAD_AO_HV,        UINT_MAX, 0,        "ao-hv")
 
 static const struct tegra_io_pad_soc tegra186_io_pads[] = {
 	TEGRA186_IO_PAD_TABLE(TEGRA_IO_PAD)
@@ -2874,56 +3222,69 @@ static const struct tegra_pmc_soc tegra186_pmc_soc = {
 	.num_reset_levels = ARRAY_SIZE(tegra186_reset_levels),
 	.num_wake_events = ARRAY_SIZE(tegra186_wake_events),
 	.wake_events = tegra186_wake_events,
+	.pmc_clks_data = NULL,
+	.num_pmc_clks = 0,
+	.has_blink_output = false,
 };
 
+#define TEGRA194_IO_PAD_TABLE(_pad)                                              \
+	/*   .id                          .dpd      .voltage  .name */           \
+	_pad(TEGRA_IO_PAD_CSIA,           0,        UINT_MAX, "csia"),           \
+	_pad(TEGRA_IO_PAD_CSIB,           1,        UINT_MAX, "csib"),           \
+	_pad(TEGRA_IO_PAD_MIPI_BIAS,      3,        UINT_MAX, "mipi-bias"),      \
+	_pad(TEGRA_IO_PAD_PEX_CLK_BIAS,   4,        UINT_MAX, "pex-clk-bias"),   \
+	_pad(TEGRA_IO_PAD_PEX_CLK3,       5,        UINT_MAX, "pex-clk3"),       \
+	_pad(TEGRA_IO_PAD_PEX_CLK2,       6,        UINT_MAX, "pex-clk2"),       \
+	_pad(TEGRA_IO_PAD_PEX_CLK1,       7,        UINT_MAX, "pex-clk1"),       \
+	_pad(TEGRA_IO_PAD_EQOS,           8,        UINT_MAX, "eqos"),           \
+	_pad(TEGRA_IO_PAD_PEX_CLK_2_BIAS, 9,        UINT_MAX, "pex-clk-2-bias"), \
+	_pad(TEGRA_IO_PAD_PEX_CLK_2,      10,       UINT_MAX, "pex-clk-2"),      \
+	_pad(TEGRA_IO_PAD_DAP3,           11,       UINT_MAX, "dap3"),           \
+	_pad(TEGRA_IO_PAD_DAP5,           12,       UINT_MAX, "dap5"),           \
+	_pad(TEGRA_IO_PAD_UART,           14,       UINT_MAX, "uart"),           \
+	_pad(TEGRA_IO_PAD_PWR_CTL,        15,       UINT_MAX, "pwr-ctl"),        \
+	_pad(TEGRA_IO_PAD_SOC_GPIO53,     16,       UINT_MAX, "soc-gpio53"),     \
+	_pad(TEGRA_IO_PAD_AUDIO,          17,       UINT_MAX, "audio"),          \
+	_pad(TEGRA_IO_PAD_GP_PWM2,        18,       UINT_MAX, "gp-pwm2"),        \
+	_pad(TEGRA_IO_PAD_GP_PWM3,        19,       UINT_MAX, "gp-pwm3"),        \
+	_pad(TEGRA_IO_PAD_SOC_GPIO12,     20,       UINT_MAX, "soc-gpio12"),     \
+	_pad(TEGRA_IO_PAD_SOC_GPIO13,     21,       UINT_MAX, "soc-gpio13"),     \
+	_pad(TEGRA_IO_PAD_SOC_GPIO10,     22,       UINT_MAX, "soc-gpio10"),     \
+	_pad(TEGRA_IO_PAD_UART4,          23,       UINT_MAX, "uart4"),          \
+	_pad(TEGRA_IO_PAD_UART5,          24,       UINT_MAX, "uart5"),          \
+	_pad(TEGRA_IO_PAD_DBG,            25,       UINT_MAX, "dbg"),            \
+	_pad(TEGRA_IO_PAD_HDMI_DP3,       26,       UINT_MAX, "hdmi-dp3"),       \
+	_pad(TEGRA_IO_PAD_HDMI_DP2,       27,       UINT_MAX, "hdmi-dp2"),       \
+	_pad(TEGRA_IO_PAD_HDMI_DP0,       28,       UINT_MAX, "hdmi-dp0"),       \
+	_pad(TEGRA_IO_PAD_HDMI_DP1,       29,       UINT_MAX, "hdmi-dp1"),       \
+	_pad(TEGRA_IO_PAD_PEX_CNTRL,      32,       UINT_MAX, "pex-cntrl"),      \
+	_pad(TEGRA_IO_PAD_PEX_CTL2,       33,       UINT_MAX, "pex-ctl2"),       \
+	_pad(TEGRA_IO_PAD_PEX_L0_RST_N,   34,       UINT_MAX, "pex-l0-rst"),     \
+	_pad(TEGRA_IO_PAD_PEX_L1_RST_N,   35,       UINT_MAX, "pex-l1-rst"),     \
+	_pad(TEGRA_IO_PAD_SDMMC4,         36,       UINT_MAX, "sdmmc4"),         \
+	_pad(TEGRA_IO_PAD_PEX_L5_RST_N,   37,       UINT_MAX, "pex-l5-rst"),     \
+	_pad(TEGRA_IO_PAD_CAM,            38,       UINT_MAX, "cam"),            \
+	_pad(TEGRA_IO_PAD_CSIC,           43,       UINT_MAX, "csic"),           \
+	_pad(TEGRA_IO_PAD_CSID,           44,       UINT_MAX, "csid"),           \
+	_pad(TEGRA_IO_PAD_CSIE,           45,       UINT_MAX, "csie"),           \
+	_pad(TEGRA_IO_PAD_CSIF,           46,       UINT_MAX, "csif"),           \
+	_pad(TEGRA_IO_PAD_SPI,            47,       UINT_MAX, "spi"),            \
+	_pad(TEGRA_IO_PAD_UFS,            49,       UINT_MAX, "ufs"),            \
+	_pad(TEGRA_IO_PAD_CSIG,           50,       UINT_MAX, "csig"),           \
+	_pad(TEGRA_IO_PAD_CSIH,           51,       UINT_MAX, "csih"),           \
+	_pad(TEGRA_IO_PAD_EDP,            53,       UINT_MAX, "edp"),            \
+	_pad(TEGRA_IO_PAD_SDMMC1_HV,      55,       4,        "sdmmc1-hv"),      \
+	_pad(TEGRA_IO_PAD_SDMMC3_HV,      56,       6,        "sdmmc3-hv"),      \
+	_pad(TEGRA_IO_PAD_CONN,           60,       UINT_MAX, "conn"),           \
+	_pad(TEGRA_IO_PAD_AUDIO_HV,       61,       1,        "audio-hv"),       \
+	_pad(TEGRA_IO_PAD_AO_HV,          UINT_MAX, 0,        "ao-hv")
+
 static const struct tegra_io_pad_soc tegra194_io_pads[] = {
-	{ .id = TEGRA_IO_PAD_CSIA, .dpd = 0, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_CSIB, .dpd = 1, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_MIPI_BIAS, .dpd = 3, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_PEX_CLK_BIAS, .dpd = 4, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_PEX_CLK3, .dpd = 5, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_PEX_CLK2, .dpd = 6, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_PEX_CLK1, .dpd = 7, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_EQOS, .dpd = 8, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_PEX_CLK2_BIAS, .dpd = 9, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_PEX_CLK2, .dpd = 10, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_DAP3, .dpd = 11, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_DAP5, .dpd = 12, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_UART, .dpd = 14, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_PWR_CTL, .dpd = 15, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_SOC_GPIO53, .dpd = 16, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_AUDIO, .dpd = 17, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_GP_PWM2, .dpd = 18, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_GP_PWM3, .dpd = 19, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_SOC_GPIO12, .dpd = 20, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_SOC_GPIO13, .dpd = 21, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_SOC_GPIO10, .dpd = 22, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_UART4, .dpd = 23, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_UART5, .dpd = 24, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_DBG, .dpd = 25, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_HDMI_DP3, .dpd = 26, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_HDMI_DP2, .dpd = 27, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_HDMI_DP0, .dpd = 28, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_HDMI_DP1, .dpd = 29, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_PEX_CNTRL, .dpd = 32, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_PEX_CTL2, .dpd = 33, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_PEX_L0_RST_N, .dpd = 34, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_PEX_L1_RST_N, .dpd = 35, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_SDMMC4, .dpd = 36, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_PEX_L5_RST_N, .dpd = 37, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_CSIC, .dpd = 43, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_CSID, .dpd = 44, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_CSIE, .dpd = 45, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_CSIF, .dpd = 46, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_SPI, .dpd = 47, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_UFS, .dpd = 49, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_CSIG, .dpd = 50, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_CSIH, .dpd = 51, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_EDP, .dpd = 53, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_SDMMC1_HV, .dpd = 55, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_SDMMC3_HV, .dpd = 56, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_CONN, .dpd = 60, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_AUDIO_HV, .dpd = 61, .voltage = UINT_MAX },
+	TEGRA194_IO_PAD_TABLE(TEGRA_IO_PAD)
+};
+
+static const struct pinctrl_pin_desc tegra194_pin_descs[] = {
+	TEGRA194_IO_PAD_TABLE(TEGRA_IO_PIN_DESC)
 };
 
 static const struct tegra_pmc_regs tegra194_pmc_regs = {
@@ -2976,10 +3337,12 @@ static const struct tegra_pmc_soc tegra194_pmc_soc = {
 	.has_tsense_reset = false,
 	.has_gpu_clamps = false,
 	.needs_mbist_war = false,
-	.has_impl_33v_pwr = false,
+	.has_impl_33v_pwr = true,
 	.maybe_tz_only = false,
 	.num_io_pads = ARRAY_SIZE(tegra194_io_pads),
 	.io_pads = tegra194_io_pads,
+	.num_pin_descs = ARRAY_SIZE(tegra194_pin_descs),
+	.pin_descs = tegra194_pin_descs,
 	.regs = &tegra194_pmc_regs,
 	.init = NULL,
 	.setup_irq_polarity = tegra186_pmc_setup_irq_polarity,
@@ -2991,6 +3354,9 @@ static const struct tegra_pmc_soc tegra194_pmc_soc = {
 	.num_reset_levels = ARRAY_SIZE(tegra186_reset_levels),
 	.num_wake_events = ARRAY_SIZE(tegra194_wake_events),
 	.wake_events = tegra194_wake_events,
+	.pmc_clks_data = NULL,
+	.num_pmc_clks = 0,
+	.has_blink_output = false,
 };
 
 static const struct of_device_id tegra_pmc_match[] = {
diff --git a/drivers/soc/ti/pm33xx.c b/drivers/soc/ti/pm33xx.c
index ccc6d53..de0123e 100644
--- a/drivers/soc/ti/pm33xx.c
+++ b/drivers/soc/ti/pm33xx.c
@@ -130,6 +130,19 @@ static int am33xx_push_sram_idle(void)
 	return 0;
 }
 
+static int am33xx_do_sram_idle(u32 wfi_flags)
+{
+	int ret = 0;
+
+	if (!m3_ipc || !pm_ops)
+		return 0;
+
+	if (wfi_flags & WFI_FLAG_WAKE_M3)
+		ret = m3_ipc->ops->prepare_low_power(m3_ipc, WKUP_M3_IDLE);
+
+	return pm_ops->cpu_suspend(am33xx_do_wfi_sram, wfi_flags);
+}
+
 static int __init am43xx_map_gic(void)
 {
 	gic_dist_base = ioremap(AM43XX_GIC_DIST_BASE, SZ_4K);
@@ -260,6 +273,8 @@ static int am33xx_pm_begin(suspend_state_t state)
 		rtc_only_idle = 0;
 	}
 
+	pm_ops->begin_suspend();
+
 	switch (state) {
 	case PM_SUSPEND_MEM:
 		ret = m3_ipc->ops->prepare_low_power(m3_ipc, WKUP_M3_DEEPSLEEP);
@@ -301,6 +316,8 @@ static void am33xx_pm_end(void)
 	}
 
 	rtc_only_idle = 0;
+
+	pm_ops->finish_suspend();
 }
 
 static int am33xx_pm_valid(suspend_state_t state)
@@ -503,7 +520,7 @@ static int am33xx_pm_probe(struct platform_device *pdev)
 	suspend_wfi_flags |= WFI_FLAG_WAKE_M3;
 #endif /* CONFIG_SUSPEND */
 
-	ret = pm_ops->init();
+	ret = pm_ops->init(am33xx_do_sram_idle);
 	if (ret) {
 		dev_err(dev, "Unable to call core pm init!\n");
 		ret = -ENODEV;
@@ -522,6 +539,8 @@ static int am33xx_pm_probe(struct platform_device *pdev)
 
 static int am33xx_pm_remove(struct platform_device *pdev)
 {
+	if (pm_ops->deinit)
+		pm_ops->deinit();
 	suspend_set_ops(NULL);
 	wkup_m3_ipc_put(m3_ipc);
 	am33xx_pm_free_sram();
diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c
index 6106577..488c3c9 100644
--- a/drivers/soundwire/bus.c
+++ b/drivers/soundwire/bus.c
@@ -2,6 +2,7 @@
 // Copyright(c) 2015-17 Intel Corporation.
 
 #include <linux/acpi.h>
+#include <linux/delay.h>
 #include <linux/mod_devicetable.h>
 #include <linux/pm_runtime.h>
 #include <linux/soundwire/sdw_registers.h>
@@ -113,6 +114,8 @@ static int sdw_delete_slave(struct device *dev, void *data)
 	struct sdw_slave *slave = dev_to_sdw_dev(dev);
 	struct sdw_bus *bus = slave->bus;
 
+	pm_runtime_disable(dev);
+
 	sdw_slave_debugfs_exit(slave);
 
 	mutex_lock(&bus->bus_lock);
@@ -317,14 +320,15 @@ int sdw_fill_msg(struct sdw_msg *msg, struct sdw_slave *slave,
 	return 0;
 }
 
-/**
- * sdw_nread() - Read "n" contiguous SDW Slave registers
- * @slave: SDW Slave
- * @addr: Register address
- * @count: length
- * @val: Buffer for values to be read
+/*
+ * Read/Write IO functions.
+ * no_pm versions can only be called by the bus, e.g. while enumerating or
+ * handling suspend-resume sequences.
+ * all clients need to use the pm versions
  */
-int sdw_nread(struct sdw_slave *slave, u32 addr, size_t count, u8 *val)
+
+static int
+sdw_nread_no_pm(struct sdw_slave *slave, u32 addr, size_t count, u8 *val)
 {
 	struct sdw_msg msg;
 	int ret;
@@ -334,11 +338,94 @@ int sdw_nread(struct sdw_slave *slave, u32 addr, size_t count, u8 *val)
 	if (ret < 0)
 		return ret;
 
-	ret = pm_runtime_get_sync(slave->bus->dev);
+	return sdw_transfer(slave->bus, &msg);
+}
+
+static int
+sdw_nwrite_no_pm(struct sdw_slave *slave, u32 addr, size_t count, u8 *val)
+{
+	struct sdw_msg msg;
+	int ret;
+
+	ret = sdw_fill_msg(&msg, slave, addr, count,
+			   slave->dev_num, SDW_MSG_FLAG_WRITE, val);
 	if (ret < 0)
 		return ret;
 
-	ret = sdw_transfer(slave->bus, &msg);
+	return sdw_transfer(slave->bus, &msg);
+}
+
+static int sdw_write_no_pm(struct sdw_slave *slave, u32 addr, u8 value)
+{
+	return sdw_nwrite_no_pm(slave, addr, 1, &value);
+}
+
+static int
+sdw_bread_no_pm(struct sdw_bus *bus, u16 dev_num, u32 addr)
+{
+	struct sdw_msg msg;
+	u8 buf;
+	int ret;
+
+	ret = sdw_fill_msg(&msg, NULL, addr, 1, dev_num,
+			   SDW_MSG_FLAG_READ, &buf);
+	if (ret)
+		return ret;
+
+	ret = sdw_transfer(bus, &msg);
+	if (ret < 0)
+		return ret;
+	else
+		return buf;
+}
+
+static int
+sdw_bwrite_no_pm(struct sdw_bus *bus, u16 dev_num, u32 addr, u8 value)
+{
+	struct sdw_msg msg;
+	int ret;
+
+	ret = sdw_fill_msg(&msg, NULL, addr, 1, dev_num,
+			   SDW_MSG_FLAG_WRITE, &value);
+	if (ret)
+		return ret;
+
+	return sdw_transfer(bus, &msg);
+}
+
+static int
+sdw_read_no_pm(struct sdw_slave *slave, u32 addr)
+{
+	u8 buf;
+	int ret;
+
+	ret = sdw_nread_no_pm(slave, addr, 1, &buf);
+	if (ret < 0)
+		return ret;
+	else
+		return buf;
+}
+
+/**
+ * sdw_nread() - Read "n" contiguous SDW Slave registers
+ * @slave: SDW Slave
+ * @addr: Register address
+ * @count: length
+ * @val: Buffer for values to be read
+ */
+int sdw_nread(struct sdw_slave *slave, u32 addr, size_t count, u8 *val)
+{
+	int ret;
+
+	ret = pm_runtime_get_sync(slave->bus->dev);
+	if (ret < 0 && ret != -EACCES) {
+		pm_runtime_put_noidle(slave->bus->dev);
+		return ret;
+	}
+
+	ret = sdw_nread_no_pm(slave, addr, count, val);
+
+	pm_runtime_mark_last_busy(slave->bus->dev);
 	pm_runtime_put(slave->bus->dev);
 
 	return ret;
@@ -354,19 +441,17 @@ EXPORT_SYMBOL(sdw_nread);
  */
 int sdw_nwrite(struct sdw_slave *slave, u32 addr, size_t count, u8 *val)
 {
-	struct sdw_msg msg;
 	int ret;
 
-	ret = sdw_fill_msg(&msg, slave, addr, count,
-			   slave->dev_num, SDW_MSG_FLAG_WRITE, val);
-	if (ret < 0)
-		return ret;
-
 	ret = pm_runtime_get_sync(slave->bus->dev);
-	if (ret < 0)
+	if (ret < 0 && ret != -EACCES) {
+		pm_runtime_put_noidle(slave->bus->dev);
 		return ret;
+	}
 
-	ret = sdw_transfer(slave->bus, &msg);
+	ret = sdw_nwrite_no_pm(slave, addr, count, val);
+
+	pm_runtime_mark_last_busy(slave->bus->dev);
 	pm_runtime_put(slave->bus->dev);
 
 	return ret;
@@ -486,7 +571,7 @@ static int sdw_assign_device_num(struct sdw_slave *slave)
 	dev_num = slave->dev_num;
 	slave->dev_num = 0;
 
-	ret = sdw_write(slave, SDW_SCP_DEVNUMBER, dev_num);
+	ret = sdw_write_no_pm(slave, SDW_SCP_DEVNUMBER, dev_num);
 	if (ret < 0) {
 		dev_err(&slave->dev, "Program device_num %d failed: %d\n",
 			dev_num, ret);
@@ -504,22 +589,11 @@ void sdw_extract_slave_id(struct sdw_bus *bus,
 {
 	dev_dbg(bus->dev, "SDW Slave Addr: %llx\n", addr);
 
-	/*
-	 * Spec definition
-	 *   Register		Bit	Contents
-	 *   DevId_0 [7:4]	47:44	sdw_version
-	 *   DevId_0 [3:0]	43:40	unique_id
-	 *   DevId_1		39:32	mfg_id [15:8]
-	 *   DevId_2		31:24	mfg_id [7:0]
-	 *   DevId_3		23:16	part_id [15:8]
-	 *   DevId_4		15:08	part_id [7:0]
-	 *   DevId_5		07:00	class_id
-	 */
-	id->sdw_version = (addr >> 44) & GENMASK(3, 0);
-	id->unique_id = (addr >> 40) & GENMASK(3, 0);
-	id->mfg_id = (addr >> 24) & GENMASK(15, 0);
-	id->part_id = (addr >> 8) & GENMASK(15, 0);
-	id->class_id = addr & GENMASK(7, 0);
+	id->sdw_version = SDW_VERSION(addr);
+	id->unique_id = SDW_UNIQUE_ID(addr);
+	id->mfg_id = SDW_MFG_ID(addr);
+	id->part_id = SDW_PART_ID(addr);
+	id->class_id = SDW_CLASS_ID(addr);
 
 	dev_dbg(bus->dev,
 		"SDW Slave class_id %x, part_id %x, mfg_id %x, unique_id %x, version %x\n",
@@ -610,10 +684,320 @@ static void sdw_modify_slave_status(struct sdw_slave *slave,
 				    enum sdw_slave_status status)
 {
 	mutex_lock(&slave->bus->bus_lock);
+
+	dev_vdbg(&slave->dev,
+		 "%s: changing status slave %d status %d new status %d\n",
+		 __func__, slave->dev_num, slave->status, status);
+
+	if (status == SDW_SLAVE_UNATTACHED) {
+		dev_dbg(&slave->dev,
+			"%s: initializing completion for Slave %d\n",
+			__func__, slave->dev_num);
+
+		init_completion(&slave->enumeration_complete);
+		init_completion(&slave->initialization_complete);
+
+	} else if ((status == SDW_SLAVE_ATTACHED) &&
+		   (slave->status == SDW_SLAVE_UNATTACHED)) {
+		dev_dbg(&slave->dev,
+			"%s: signaling completion for Slave %d\n",
+			__func__, slave->dev_num);
+
+		complete(&slave->enumeration_complete);
+	}
 	slave->status = status;
 	mutex_unlock(&slave->bus->bus_lock);
 }
 
+static enum sdw_clk_stop_mode sdw_get_clk_stop_mode(struct sdw_slave *slave)
+{
+	enum sdw_clk_stop_mode mode;
+
+	/*
+	 * Query for clock stop mode if Slave implements
+	 * ops->get_clk_stop_mode, else read from property.
+	 */
+	if (slave->ops && slave->ops->get_clk_stop_mode) {
+		mode = slave->ops->get_clk_stop_mode(slave);
+	} else {
+		if (slave->prop.clk_stop_mode1)
+			mode = SDW_CLK_STOP_MODE1;
+		else
+			mode = SDW_CLK_STOP_MODE0;
+	}
+
+	return mode;
+}
+
+static int sdw_slave_clk_stop_callback(struct sdw_slave *slave,
+				       enum sdw_clk_stop_mode mode,
+				       enum sdw_clk_stop_type type)
+{
+	int ret;
+
+	if (slave->ops && slave->ops->clk_stop) {
+		ret = slave->ops->clk_stop(slave, mode, type);
+		if (ret < 0) {
+			dev_err(&slave->dev,
+				"Clk Stop type =%d failed: %d\n", type, ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int sdw_slave_clk_stop_prepare(struct sdw_slave *slave,
+				      enum sdw_clk_stop_mode mode,
+				      bool prepare)
+{
+	bool wake_en;
+	u32 val = 0;
+	int ret;
+
+	wake_en = slave->prop.wake_capable;
+
+	if (prepare) {
+		val = SDW_SCP_SYSTEMCTRL_CLK_STP_PREP;
+
+		if (mode == SDW_CLK_STOP_MODE1)
+			val |= SDW_SCP_SYSTEMCTRL_CLK_STP_MODE1;
+
+		if (wake_en)
+			val |= SDW_SCP_SYSTEMCTRL_WAKE_UP_EN;
+	} else {
+		val = sdw_read_no_pm(slave, SDW_SCP_SYSTEMCTRL);
+
+		val &= ~(SDW_SCP_SYSTEMCTRL_CLK_STP_PREP);
+	}
+
+	ret = sdw_write_no_pm(slave, SDW_SCP_SYSTEMCTRL, val);
+
+	if (ret != 0)
+		dev_err(&slave->dev,
+			"Clock Stop prepare failed for slave: %d", ret);
+
+	return ret;
+}
+
+static int sdw_bus_wait_for_clk_prep_deprep(struct sdw_bus *bus, u16 dev_num)
+{
+	int retry = bus->clk_stop_timeout;
+	int val;
+
+	do {
+		val = sdw_bread_no_pm(bus, dev_num, SDW_SCP_STAT) &
+			SDW_SCP_STAT_CLK_STP_NF;
+		if (!val) {
+			dev_info(bus->dev, "clock stop prep/de-prep done slave:%d",
+				 dev_num);
+			return 0;
+		}
+
+		usleep_range(1000, 1500);
+		retry--;
+	} while (retry);
+
+	dev_err(bus->dev, "clock stop prep/de-prep failed slave:%d",
+		dev_num);
+
+	return -ETIMEDOUT;
+}
+
+/**
+ * sdw_bus_prep_clk_stop: prepare Slave(s) for clock stop
+ *
+ * @bus: SDW bus instance
+ *
+ * Query Slave for clock stop mode and prepare for that mode.
+ */
+int sdw_bus_prep_clk_stop(struct sdw_bus *bus)
+{
+	enum sdw_clk_stop_mode slave_mode;
+	bool simple_clk_stop = true;
+	struct sdw_slave *slave;
+	bool is_slave = false;
+	int ret = 0;
+
+	/*
+	 * In order to save on transition time, prepare
+	 * each Slave and then wait for all Slave(s) to be
+	 * prepared for clock stop.
+	 */
+	list_for_each_entry(slave, &bus->slaves, node) {
+		if (!slave->dev_num)
+			continue;
+
+		/* Identify if Slave(s) are available on Bus */
+		is_slave = true;
+
+		if (slave->status != SDW_SLAVE_ATTACHED &&
+		    slave->status != SDW_SLAVE_ALERT)
+			continue;
+
+		slave_mode = sdw_get_clk_stop_mode(slave);
+		slave->curr_clk_stop_mode = slave_mode;
+
+		ret = sdw_slave_clk_stop_callback(slave, slave_mode,
+						  SDW_CLK_PRE_PREPARE);
+		if (ret < 0) {
+			dev_err(&slave->dev,
+				"pre-prepare failed:%d", ret);
+			return ret;
+		}
+
+		ret = sdw_slave_clk_stop_prepare(slave,
+						 slave_mode, true);
+		if (ret < 0) {
+			dev_err(&slave->dev,
+				"pre-prepare failed:%d", ret);
+			return ret;
+		}
+
+		if (slave_mode == SDW_CLK_STOP_MODE1)
+			simple_clk_stop = false;
+	}
+
+	if (is_slave && !simple_clk_stop) {
+		ret = sdw_bus_wait_for_clk_prep_deprep(bus,
+						       SDW_BROADCAST_DEV_NUM);
+		if (ret < 0)
+			return ret;
+	}
+
+	/* Inform slaves that prep is done */
+	list_for_each_entry(slave, &bus->slaves, node) {
+		if (!slave->dev_num)
+			continue;
+
+		if (slave->status != SDW_SLAVE_ATTACHED &&
+		    slave->status != SDW_SLAVE_ALERT)
+			continue;
+
+		slave_mode = slave->curr_clk_stop_mode;
+
+		if (slave_mode == SDW_CLK_STOP_MODE1) {
+			ret = sdw_slave_clk_stop_callback(slave,
+							  slave_mode,
+							  SDW_CLK_POST_PREPARE);
+
+			if (ret < 0) {
+				dev_err(&slave->dev,
+					"post-prepare failed:%d", ret);
+			}
+		}
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(sdw_bus_prep_clk_stop);
+
+/**
+ * sdw_bus_clk_stop: stop bus clock
+ *
+ * @bus: SDW bus instance
+ *
+ * After preparing the Slaves for clock stop, stop the clock by broadcasting
+ * write to SCP_CTRL register.
+ */
+int sdw_bus_clk_stop(struct sdw_bus *bus)
+{
+	int ret;
+
+	/*
+	 * broadcast clock stop now, attached Slaves will ACK this,
+	 * unattached will ignore
+	 */
+	ret = sdw_bwrite_no_pm(bus, SDW_BROADCAST_DEV_NUM,
+			       SDW_SCP_CTRL, SDW_SCP_CTRL_CLK_STP_NOW);
+	if (ret < 0) {
+		if (ret == -ENODATA)
+			dev_dbg(bus->dev,
+				"ClockStopNow Broadcast msg ignored %d", ret);
+		else
+			dev_err(bus->dev,
+				"ClockStopNow Broadcast msg failed %d", ret);
+		return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(sdw_bus_clk_stop);
+
+/**
+ * sdw_bus_exit_clk_stop: Exit clock stop mode
+ *
+ * @bus: SDW bus instance
+ *
+ * This De-prepares the Slaves by exiting Clock Stop Mode 0. For the Slaves
+ * exiting Clock Stop Mode 1, they will be de-prepared after they enumerate
+ * back.
+ */
+int sdw_bus_exit_clk_stop(struct sdw_bus *bus)
+{
+	enum sdw_clk_stop_mode mode;
+	bool simple_clk_stop = true;
+	struct sdw_slave *slave;
+	bool is_slave = false;
+	int ret;
+
+	/*
+	 * In order to save on transition time, de-prepare
+	 * each Slave and then wait for all Slave(s) to be
+	 * de-prepared after clock resume.
+	 */
+	list_for_each_entry(slave, &bus->slaves, node) {
+		if (!slave->dev_num)
+			continue;
+
+		/* Identify if Slave(s) are available on Bus */
+		is_slave = true;
+
+		if (slave->status != SDW_SLAVE_ATTACHED &&
+		    slave->status != SDW_SLAVE_ALERT)
+			continue;
+
+		mode = slave->curr_clk_stop_mode;
+
+		if (mode == SDW_CLK_STOP_MODE1) {
+			simple_clk_stop = false;
+			continue;
+		}
+
+		ret = sdw_slave_clk_stop_callback(slave, mode,
+						  SDW_CLK_PRE_DEPREPARE);
+		if (ret < 0)
+			dev_warn(&slave->dev,
+				 "clk stop deprep failed:%d", ret);
+
+		ret = sdw_slave_clk_stop_prepare(slave, mode,
+						 false);
+
+		if (ret < 0)
+			dev_warn(&slave->dev,
+				 "clk stop deprep failed:%d", ret);
+	}
+
+	if (is_slave && !simple_clk_stop)
+		sdw_bus_wait_for_clk_prep_deprep(bus, SDW_BROADCAST_DEV_NUM);
+
+	list_for_each_entry(slave, &bus->slaves, node) {
+		if (!slave->dev_num)
+			continue;
+
+		if (slave->status != SDW_SLAVE_ATTACHED &&
+		    slave->status != SDW_SLAVE_ALERT)
+			continue;
+
+		mode = slave->curr_clk_stop_mode;
+		sdw_slave_clk_stop_callback(slave, mode,
+					    SDW_CLK_POST_DEPREPARE);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(sdw_bus_exit_clk_stop);
+
 int sdw_configure_dpn_intr(struct sdw_slave *slave,
 			   int port, bool enable, int mask)
 {
@@ -672,13 +1056,10 @@ static int sdw_initialize_slave(struct sdw_slave *slave)
 	val |= SDW_DP0_INT_PORT_READY | SDW_DP0_INT_BRA_FAILURE;
 
 	ret = sdw_update(slave, SDW_DP0_INTMASK, val, val);
-	if (ret < 0) {
+	if (ret < 0)
 		dev_err(slave->bus->dev,
 			"SDW_DP0_INTMASK read failed:%d\n", ret);
-		return val;
-	}
-
-	return 0;
+	return ret;
 }
 
 static int sdw_handle_dp0_interrupt(struct sdw_slave *slave, u8 *slave_status)
@@ -831,12 +1212,19 @@ static int sdw_handle_slave_alerts(struct sdw_slave *slave)
 
 	sdw_modify_slave_status(slave, SDW_SLAVE_ALERT);
 
+	ret = pm_runtime_get_sync(&slave->dev);
+	if (ret < 0 && ret != -EACCES) {
+		dev_err(&slave->dev, "Failed to resume device: %d\n", ret);
+		pm_runtime_put_noidle(slave->bus->dev);
+		return ret;
+	}
+
 	/* Read Instat 1, Instat 2 and Instat 3 registers */
 	ret = sdw_read(slave, SDW_SCP_INT1);
 	if (ret < 0) {
 		dev_err(slave->bus->dev,
 			"SDW_SCP_INT1 read failed:%d\n", ret);
-		return ret;
+		goto io_err;
 	}
 	buf = ret;
 
@@ -844,7 +1232,7 @@ static int sdw_handle_slave_alerts(struct sdw_slave *slave)
 	if (ret < 0) {
 		dev_err(slave->bus->dev,
 			"SDW_SCP_INT2/3 read failed:%d\n", ret);
-		return ret;
+		goto io_err;
 	}
 
 	do {
@@ -924,7 +1312,7 @@ static int sdw_handle_slave_alerts(struct sdw_slave *slave)
 		if (ret < 0) {
 			dev_err(slave->bus->dev,
 				"SDW_SCP_INT1 write failed:%d\n", ret);
-			return ret;
+			goto io_err;
 		}
 
 		/*
@@ -935,7 +1323,7 @@ static int sdw_handle_slave_alerts(struct sdw_slave *slave)
 		if (ret < 0) {
 			dev_err(slave->bus->dev,
 				"SDW_SCP_INT1 read failed:%d\n", ret);
-			return ret;
+			goto io_err;
 		}
 		_buf = ret;
 
@@ -943,7 +1331,7 @@ static int sdw_handle_slave_alerts(struct sdw_slave *slave)
 		if (ret < 0) {
 			dev_err(slave->bus->dev,
 				"SDW_SCP_INT2/3 read failed:%d\n", ret);
-			return ret;
+			goto io_err;
 		}
 
 		/* Make sure no interrupts are pending */
@@ -964,16 +1352,39 @@ static int sdw_handle_slave_alerts(struct sdw_slave *slave)
 	if (count == SDW_READ_INTR_CLEAR_RETRY)
 		dev_warn(slave->bus->dev, "Reached MAX_RETRY on alert read\n");
 
+io_err:
+	pm_runtime_mark_last_busy(&slave->dev);
+	pm_runtime_put_autosuspend(&slave->dev);
+
 	return ret;
 }
 
 static int sdw_update_slave_status(struct sdw_slave *slave,
 				   enum sdw_slave_status status)
 {
-	if (slave->ops && slave->ops->update_status)
-		return slave->ops->update_status(slave, status);
+	unsigned long time;
 
-	return 0;
+	if (!slave->probed) {
+		/*
+		 * the slave status update is typically handled in an
+		 * interrupt thread, which can race with the driver
+		 * probe, e.g. when a module needs to be loaded.
+		 *
+		 * make sure the probe is complete before updating
+		 * status.
+		 */
+		time = wait_for_completion_timeout(&slave->probe_complete,
+				msecs_to_jiffies(DEFAULT_PROBE_TIMEOUT));
+		if (!time) {
+			dev_err(&slave->dev, "Probe not complete, timed out\n");
+			return -ETIMEDOUT;
+		}
+	}
+
+	if (!slave->ops || !slave->ops->update_status)
+		return 0;
+
+	return slave->ops->update_status(slave, status);
 }
 
 /**
@@ -986,6 +1397,7 @@ int sdw_handle_slave_status(struct sdw_bus *bus,
 {
 	enum sdw_slave_status prev_status;
 	struct sdw_slave *slave;
+	bool attached_initializing;
 	int i, ret = 0;
 
 	/* first check if any Slaves fell off the bus */
@@ -1031,6 +1443,8 @@ int sdw_handle_slave_status(struct sdw_bus *bus,
 		if (!slave)
 			continue;
 
+		attached_initializing = false;
+
 		switch (status[i]) {
 		case SDW_SLAVE_UNATTACHED:
 			if (slave->status == SDW_SLAVE_UNATTACHED)
@@ -1057,6 +1471,8 @@ int sdw_handle_slave_status(struct sdw_bus *bus,
 			if (prev_status == SDW_SLAVE_ALERT)
 				break;
 
+			attached_initializing = true;
+
 			ret = sdw_initialize_slave(slave);
 			if (ret)
 				dev_err(bus->dev,
@@ -1075,8 +1491,37 @@ int sdw_handle_slave_status(struct sdw_bus *bus,
 		if (ret)
 			dev_err(slave->bus->dev,
 				"Update Slave status failed:%d\n", ret);
+		if (attached_initializing)
+			complete(&slave->initialization_complete);
 	}
 
 	return ret;
 }
 EXPORT_SYMBOL(sdw_handle_slave_status);
+
+void sdw_clear_slave_status(struct sdw_bus *bus, u32 request)
+{
+	struct sdw_slave *slave;
+	int i;
+
+	/* Check all non-zero devices */
+	for (i = 1; i <= SDW_MAX_DEVICES; i++) {
+		mutex_lock(&bus->bus_lock);
+		if (test_bit(i, bus->assigned) == false) {
+			mutex_unlock(&bus->bus_lock);
+			continue;
+		}
+		mutex_unlock(&bus->bus_lock);
+
+		slave = sdw_get_slave(bus, i);
+		if (!slave)
+			continue;
+
+		if (slave->status != SDW_SLAVE_UNATTACHED)
+			sdw_modify_slave_status(slave, SDW_SLAVE_UNATTACHED);
+
+		/* keep track of request, used in pm_runtime resume */
+		slave->unattach_request = request;
+	}
+}
+EXPORT_SYMBOL(sdw_clear_slave_status);
diff --git a/drivers/soundwire/bus.h b/drivers/soundwire/bus.h
index cb482da..204204a 100644
--- a/drivers/soundwire/bus.h
+++ b/drivers/soundwire/bus.h
@@ -5,6 +5,7 @@
 #define __SDW_BUS_H
 
 #define DEFAULT_BANK_SWITCH_TIMEOUT 3000
+#define DEFAULT_PROBE_TIMEOUT       2000
 
 #if IS_ENABLED(CONFIG_ACPI)
 int sdw_acpi_find_slaves(struct sdw_bus *bus);
@@ -164,4 +165,12 @@ sdw_update(struct sdw_slave *slave, u32 addr, u8 mask, u8 val)
 	return sdw_write(slave, addr, tmp);
 }
 
+/*
+ * At the moment we only track Master-initiated hw_reset.
+ * Additional fields can be added as needed
+ */
+#define SDW_UNATTACH_REQUEST_MASTER_RESET	BIT(0)
+
+void sdw_clear_slave_status(struct sdw_bus *bus, u32 request);
+
 #endif /* __SDW_BUS_H */
diff --git a/drivers/soundwire/bus_type.c b/drivers/soundwire/bus_type.c
index 4a465f5..17f096d 100644
--- a/drivers/soundwire/bus_type.c
+++ b/drivers/soundwire/bus_type.c
@@ -110,6 +110,11 @@ static int sdw_drv_probe(struct device *dev)
 	slave->bus->clk_stop_timeout = max_t(u32, slave->bus->clk_stop_timeout,
 					     slave->prop.clk_stop_timeout);
 
+	slave->probed = true;
+	complete(&slave->probe_complete);
+
+	dev_dbg(dev, "probe complete\n");
+
 	return 0;
 }
 
diff --git a/drivers/soundwire/cadence_master.c b/drivers/soundwire/cadence_master.c
index 9bec270..ecd357d1 100644
--- a/drivers/soundwire/cadence_master.c
+++ b/drivers/soundwire/cadence_master.c
@@ -183,7 +183,6 @@ MODULE_PARM_DESC(cdns_mcp_int_mask, "Cadence MCP IntMask");
 #define CDNS_PDI_CONFIG_PORT			GENMASK(4, 0)
 
 /* Driver defaults */
-#define CDNS_DEFAULT_SSP_INTERVAL		0x18
 #define CDNS_TX_TIMEOUT				2000
 
 #define CDNS_SCP_RX_FIFOLEVEL			0x2
@@ -211,34 +210,45 @@ static inline void cdns_updatel(struct sdw_cdns *cdns,
 	cdns_writel(cdns, offset, tmp);
 }
 
-static int cdns_clear_bit(struct sdw_cdns *cdns, int offset, u32 value)
+static int cdns_set_wait(struct sdw_cdns *cdns, int offset, u32 mask, u32 value)
 {
 	int timeout = 10;
 	u32 reg_read;
 
-	writel(value, cdns->registers + offset);
-
-	/* Wait for bit to be self cleared */
+	/* Wait for bit to be set */
 	do {
 		reg_read = readl(cdns->registers + offset);
-		if ((reg_read & value) == 0)
+		if ((reg_read & mask) == value)
 			return 0;
 
 		timeout--;
-		udelay(50);
+		usleep_range(50, 100);
 	} while (timeout != 0);
 
-	return -EAGAIN;
+	return -ETIMEDOUT;
+}
+
+static int cdns_clear_bit(struct sdw_cdns *cdns, int offset, u32 value)
+{
+	writel(value, cdns->registers + offset);
+
+	/* Wait for bit to be self cleared */
+	return cdns_set_wait(cdns, offset, value, 0);
 }
 
 /*
  * all changes to the MCP_CONFIG, MCP_CONTROL, MCP_CMDCTRL and MCP_PHYCTRL
  * need to be confirmed with a write to MCP_CONFIG_UPDATE
  */
-static int cdns_update_config(struct sdw_cdns *cdns)
+static int cdns_config_update(struct sdw_cdns *cdns)
 {
 	int ret;
 
+	if (sdw_cdns_is_clock_stop(cdns)) {
+		dev_err(cdns->dev, "Cannot program MCP_CONFIG_UPDATE in ClockStopMode\n");
+		return -EINVAL;
+	}
+
 	ret = cdns_clear_bit(cdns, CDNS_MCP_CONFIG_UPDATE,
 			     CDNS_MCP_CONFIG_UPDATE_BIT);
 	if (ret < 0)
@@ -832,17 +842,36 @@ int sdw_cdns_exit_reset(struct sdw_cdns *cdns)
 		     CDNS_MCP_CONTROL_HW_RST,
 		     CDNS_MCP_CONTROL_HW_RST);
 
-	/* enable bus operations with clock and data */
-	cdns_updatel(cdns, CDNS_MCP_CONFIG,
-		     CDNS_MCP_CONFIG_OP,
-		     CDNS_MCP_CONFIG_OP_NORMAL);
-
 	/* commit changes */
-	return cdns_update_config(cdns);
+	cdns_updatel(cdns, CDNS_MCP_CONFIG_UPDATE,
+		     CDNS_MCP_CONFIG_UPDATE_BIT,
+		     CDNS_MCP_CONFIG_UPDATE_BIT);
+
+	/* don't wait here */
+	return 0;
+
 }
 EXPORT_SYMBOL(sdw_cdns_exit_reset);
 
 /**
+ * sdw_cdns_enable_slave_interrupt() - Enable SDW slave interrupts
+ * @cdns: Cadence instance
+ * @state: boolean for true/false
+ */
+static void cdns_enable_slave_interrupts(struct sdw_cdns *cdns, bool state)
+{
+	u32 mask;
+
+	mask = cdns_readl(cdns, CDNS_MCP_INTMASK);
+	if (state)
+		mask |= CDNS_MCP_INT_SLAVE_MASK;
+	else
+		mask &= ~CDNS_MCP_INT_SLAVE_MASK;
+
+	cdns_writel(cdns, CDNS_MCP_INTMASK, mask);
+}
+
+/**
  * sdw_cdns_enable_interrupt() - Enable SDW interrupts
  * @cdns: Cadence instance
  * @state: True if we are trying to enable interrupt.
@@ -1014,26 +1043,13 @@ static u32 cdns_set_initial_frame_shape(int n_rows, int n_cols)
 	return val;
 }
 
-/**
- * sdw_cdns_init() - Cadence initialization
- * @cdns: Cadence instance
- */
-int sdw_cdns_init(struct sdw_cdns *cdns, bool clock_stop_exit)
+static void cdns_init_clock_ctrl(struct sdw_cdns *cdns)
 {
 	struct sdw_bus *bus = &cdns->bus;
 	struct sdw_master_prop *prop = &bus->prop;
 	u32 val;
+	u32 ssp_interval;
 	int divider;
-	int ret;
-
-	if (clock_stop_exit) {
-		ret = cdns_clear_bit(cdns, CDNS_MCP_CONTROL,
-				     CDNS_MCP_CONTROL_CLK_STOP_CLR);
-		if (ret < 0) {
-			dev_err(cdns->dev, "Couldn't exit from clock stop\n");
-			return ret;
-		}
-	}
 
 	/* Set clock divider */
 	divider	= (prop->mclk_freq / prop->max_clk_freq) - 1;
@@ -1052,8 +1068,23 @@ int sdw_cdns_init(struct sdw_cdns *cdns, bool clock_stop_exit)
 	cdns_writel(cdns, CDNS_MCP_FRAME_SHAPE_INIT, val);
 
 	/* Set SSP interval to default value */
-	cdns_writel(cdns, CDNS_MCP_SSP_CTRL0, CDNS_DEFAULT_SSP_INTERVAL);
-	cdns_writel(cdns, CDNS_MCP_SSP_CTRL1, CDNS_DEFAULT_SSP_INTERVAL);
+	ssp_interval = prop->default_frame_rate / SDW_CADENCE_GSYNC_HZ;
+	cdns_writel(cdns, CDNS_MCP_SSP_CTRL0, ssp_interval);
+	cdns_writel(cdns, CDNS_MCP_SSP_CTRL1, ssp_interval);
+}
+
+/**
+ * sdw_cdns_init() - Cadence initialization
+ * @cdns: Cadence instance
+ */
+int sdw_cdns_init(struct sdw_cdns *cdns)
+{
+	u32 val;
+
+	cdns_init_clock_ctrl(cdns);
+
+	/* reset msg_count to default value of FIFOLEVEL */
+	cdns->msg_count = cdns_readl(cdns, CDNS_MCP_FIFOLEVEL);
 
 	/* flush command FIFOs */
 	cdns_updatel(cdns, CDNS_MCP_CONTROL, CDNS_MCP_CONTROL_CMD_RST,
@@ -1066,25 +1097,31 @@ int sdw_cdns_init(struct sdw_cdns *cdns, bool clock_stop_exit)
 	/* Configure mcp config */
 	val = cdns_readl(cdns, CDNS_MCP_CONFIG);
 
-	/* Set Max cmd retry to 15 */
-	val |= CDNS_MCP_CONFIG_MCMD_RETRY;
-
-	/* Set frame delay between PREQ and ping frame to 15 frames */
-	val |= 0xF << SDW_REG_SHIFT(CDNS_MCP_CONFIG_MPREQ_DELAY);
-
-	/* Disable auto bus release */
-	val &= ~CDNS_MCP_CONFIG_BUS_REL;
-
-	/* Disable sniffer mode */
-	val &= ~CDNS_MCP_CONFIG_SNIFFER;
+	/* enable bus operations with clock and data */
+	val &= ~CDNS_MCP_CONFIG_OP;
+	val |= CDNS_MCP_CONFIG_OP_NORMAL;
 
 	/* Set cmd mode for Tx and Rx cmds */
 	val &= ~CDNS_MCP_CONFIG_CMD;
 
+	/* Disable sniffer mode */
+	val &= ~CDNS_MCP_CONFIG_SNIFFER;
+
+	/* Disable auto bus release */
+	val &= ~CDNS_MCP_CONFIG_BUS_REL;
+
+	if (cdns->bus.multi_link)
+		/* Set Multi-master mode to take gsync into account */
+		val |= CDNS_MCP_CONFIG_MMASTER;
+
+	/* leave frame delay to hardware default of 0x1F */
+
+	/* leave command retry to hardware default of 0 */
+
 	cdns_writel(cdns, CDNS_MCP_CONFIG, val);
 
-	/* commit changes */
-	return cdns_update_config(cdns);
+	/* changes will be committed later */
+	return 0;
 }
 EXPORT_SYMBOL(sdw_cdns_init);
 
@@ -1218,6 +1255,166 @@ static const struct sdw_master_port_ops cdns_port_ops = {
 };
 
 /**
+ * sdw_cdns_is_clock_stop: Check clock status
+ *
+ * @cdns: Cadence instance
+ */
+bool sdw_cdns_is_clock_stop(struct sdw_cdns *cdns)
+{
+	return !!(cdns_readl(cdns, CDNS_MCP_STAT) & CDNS_MCP_STAT_CLK_STOP);
+}
+EXPORT_SYMBOL(sdw_cdns_is_clock_stop);
+
+/**
+ * sdw_cdns_clock_stop: Cadence clock stop configuration routine
+ *
+ * @cdns: Cadence instance
+ * @block_wake: prevent wakes if required by the platform
+ */
+int sdw_cdns_clock_stop(struct sdw_cdns *cdns, bool block_wake)
+{
+	bool slave_present = false;
+	struct sdw_slave *slave;
+	int ret;
+
+	/* Check suspend status */
+	if (sdw_cdns_is_clock_stop(cdns)) {
+		dev_dbg(cdns->dev, "Clock is already stopped\n");
+		return 0;
+	}
+
+	/*
+	 * Before entering clock stop we mask the Slave
+	 * interrupts. This helps avoid having to deal with e.g. a
+	 * Slave becoming UNATTACHED while the clock is being stopped
+	 */
+	cdns_enable_slave_interrupts(cdns, false);
+
+	/*
+	 * For specific platforms, it is required to be able to put
+	 * master into a state in which it ignores wake-up trials
+	 * in clock stop state
+	 */
+	if (block_wake)
+		cdns_updatel(cdns, CDNS_MCP_CONTROL,
+			     CDNS_MCP_CONTROL_BLOCK_WAKEUP,
+			     CDNS_MCP_CONTROL_BLOCK_WAKEUP);
+
+	list_for_each_entry(slave, &cdns->bus.slaves, node) {
+		if (slave->status == SDW_SLAVE_ATTACHED ||
+		    slave->status == SDW_SLAVE_ALERT) {
+			slave_present = true;
+			break;
+		}
+	}
+
+	/*
+	 * This CMD_ACCEPT should be used when there are no devices
+	 * attached on the link when entering clock stop mode. If this is
+	 * not set and there is a broadcast write then the command ignored
+	 * will be treated as a failure
+	 */
+	if (!slave_present)
+		cdns_updatel(cdns, CDNS_MCP_CONTROL,
+			     CDNS_MCP_CONTROL_CMD_ACCEPT,
+			     CDNS_MCP_CONTROL_CMD_ACCEPT);
+	else
+		cdns_updatel(cdns, CDNS_MCP_CONTROL,
+			     CDNS_MCP_CONTROL_CMD_ACCEPT, 0);
+
+	/* commit changes */
+	ret = cdns_config_update(cdns);
+	if (ret < 0) {
+		dev_err(cdns->dev, "%s: config_update failed\n", __func__);
+		return ret;
+	}
+
+	/* Prepare slaves for clock stop */
+	ret = sdw_bus_prep_clk_stop(&cdns->bus);
+	if (ret < 0) {
+		dev_err(cdns->dev, "prepare clock stop failed %d", ret);
+		return ret;
+	}
+
+	/*
+	 * Enter clock stop mode and only report errors if there are
+	 * Slave devices present (ALERT or ATTACHED)
+	 */
+	ret = sdw_bus_clk_stop(&cdns->bus);
+	if (ret < 0 && slave_present && ret != -ENODATA) {
+		dev_err(cdns->dev, "bus clock stop failed %d", ret);
+		return ret;
+	}
+
+	ret = cdns_set_wait(cdns, CDNS_MCP_STAT,
+			    CDNS_MCP_STAT_CLK_STOP,
+			    CDNS_MCP_STAT_CLK_STOP);
+	if (ret < 0)
+		dev_err(cdns->dev, "Clock stop failed %d\n", ret);
+
+	return ret;
+}
+EXPORT_SYMBOL(sdw_cdns_clock_stop);
+
+/**
+ * sdw_cdns_clock_restart: Cadence PM clock restart configuration routine
+ *
+ * @cdns: Cadence instance
+ * @bus_reset: context may be lost while in low power modes and the bus
+ * may require a Severe Reset and re-enumeration after a wake.
+ */
+int sdw_cdns_clock_restart(struct sdw_cdns *cdns, bool bus_reset)
+{
+	int ret;
+
+	/* unmask Slave interrupts that were masked when stopping the clock */
+	cdns_enable_slave_interrupts(cdns, true);
+
+	ret = cdns_clear_bit(cdns, CDNS_MCP_CONTROL,
+			     CDNS_MCP_CONTROL_CLK_STOP_CLR);
+	if (ret < 0) {
+		dev_err(cdns->dev, "Couldn't exit from clock stop\n");
+		return ret;
+	}
+
+	ret = cdns_set_wait(cdns, CDNS_MCP_STAT, CDNS_MCP_STAT_CLK_STOP, 0);
+	if (ret < 0) {
+		dev_err(cdns->dev, "clock stop exit failed %d\n", ret);
+		return ret;
+	}
+
+	cdns_updatel(cdns, CDNS_MCP_CONTROL,
+		     CDNS_MCP_CONTROL_BLOCK_WAKEUP, 0);
+
+	/*
+	 * clear CMD_ACCEPT so that the command ignored
+	 * will be treated as a failure during a broadcast write
+	 */
+	cdns_updatel(cdns, CDNS_MCP_CONTROL, CDNS_MCP_CONTROL_CMD_ACCEPT, 0);
+
+	if (!bus_reset) {
+
+		/* enable bus operations with clock and data */
+		cdns_updatel(cdns, CDNS_MCP_CONFIG,
+			     CDNS_MCP_CONFIG_OP,
+			     CDNS_MCP_CONFIG_OP_NORMAL);
+
+		ret = cdns_config_update(cdns);
+		if (ret < 0) {
+			dev_err(cdns->dev, "%s: config_update failed\n", __func__);
+			return ret;
+		}
+
+		ret = sdw_bus_exit_clk_stop(&cdns->bus);
+		if (ret < 0)
+			dev_err(cdns->dev, "bus failed to exit clock stop %d\n", ret);
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(sdw_cdns_clock_restart);
+
+/**
  * sdw_cdns_probe() - Cadence probe routine
  * @cdns: Cadence instance
  */
@@ -1306,6 +1503,7 @@ void sdw_cdns_config_stream(struct sdw_cdns *cdns,
 	cdns_updatel(cdns, offset, CDNS_PORTCTRL_DIRN, val);
 
 	val = pdi->num;
+	val |= CDNS_PDI_CONFIG_SOFT_RESET;
 	val |= ((1 << ch) - 1) << SDW_REG_SHIFT(CDNS_PDI_CONFIG_CHANNEL);
 	cdns_writel(cdns, CDNS_PDI_CONFIG(pdi->num), val);
 }
diff --git a/drivers/soundwire/cadence_master.h b/drivers/soundwire/cadence_master.h
index 001457c..b410656 100644
--- a/drivers/soundwire/cadence_master.h
+++ b/drivers/soundwire/cadence_master.h
@@ -5,6 +5,9 @@
 #ifndef __SDW_CADENCE_H
 #define __SDW_CADENCE_H
 
+#define SDW_CADENCE_GSYNC_KHZ		4 /* 4 kHz */
+#define SDW_CADENCE_GSYNC_HZ		(SDW_CADENCE_GSYNC_KHZ * 1000)
+
 /**
  * struct sdw_cdns_pdi: PDI (Physical Data Interface) instance
  *
@@ -138,30 +141,26 @@ extern struct sdw_master_ops sdw_cdns_master_ops;
 irqreturn_t sdw_cdns_irq(int irq, void *dev_id);
 irqreturn_t sdw_cdns_thread(int irq, void *dev_id);
 
-int sdw_cdns_init(struct sdw_cdns *cdns, bool clock_stop_exit);
+int sdw_cdns_init(struct sdw_cdns *cdns);
 int sdw_cdns_pdi_init(struct sdw_cdns *cdns,
 		      struct sdw_cdns_stream_config config);
 int sdw_cdns_exit_reset(struct sdw_cdns *cdns);
 int sdw_cdns_enable_interrupt(struct sdw_cdns *cdns, bool state);
 
+bool sdw_cdns_is_clock_stop(struct sdw_cdns *cdns);
+int sdw_cdns_clock_stop(struct sdw_cdns *cdns, bool block_wake);
+int sdw_cdns_clock_restart(struct sdw_cdns *cdns, bool bus_reset);
+
 #ifdef CONFIG_DEBUG_FS
 void sdw_cdns_debugfs_init(struct sdw_cdns *cdns, struct dentry *root);
 #endif
 
-int sdw_cdns_get_stream(struct sdw_cdns *cdns,
-			struct sdw_cdns_streams *stream,
-			u32 ch, u32 dir);
 struct sdw_cdns_pdi *sdw_cdns_alloc_pdi(struct sdw_cdns *cdns,
 					struct sdw_cdns_streams *stream,
 					u32 ch, u32 dir, int dai_id);
 void sdw_cdns_config_stream(struct sdw_cdns *cdns,
 			    u32 ch, u32 dir, struct sdw_cdns_pdi *pdi);
 
-int sdw_cdns_pcm_set_stream(struct snd_soc_dai *dai,
-			    void *stream, int direction);
-int sdw_cdns_pdm_set_stream(struct snd_soc_dai *dai,
-			    void *stream, int direction);
-
 enum sdw_command_response
 cdns_reset_page_addr(struct sdw_bus *bus, unsigned int dev_num);
 
diff --git a/drivers/soundwire/intel.c b/drivers/soundwire/intel.c
index 06ef3a3..3c83e76 100644
--- a/drivers/soundwire/intel.c
+++ b/drivers/soundwire/intel.c
@@ -103,7 +103,7 @@ enum intel_pdi_type {
 struct sdw_intel {
 	struct sdw_cdns cdns;
 	int instance;
-	struct sdw_intel_link_res *res;
+	struct sdw_intel_link_res *link_res;
 #ifdef CONFIG_DEBUG_FS
 	struct dentry *debugfs;
 #endif
@@ -193,8 +193,8 @@ static ssize_t intel_sprintf(void __iomem *mem, bool l,
 static int intel_reg_show(struct seq_file *s_file, void *data)
 {
 	struct sdw_intel *sdw = s_file->private;
-	void __iomem *s = sdw->res->shim;
-	void __iomem *a = sdw->res->alh;
+	void __iomem *s = sdw->link_res->shim;
+	void __iomem *a = sdw->link_res->alh;
 	char *buf;
 	ssize_t ret;
 	int i, j;
@@ -289,7 +289,7 @@ static void intel_debugfs_exit(struct sdw_intel *sdw) {}
 static int intel_link_power_up(struct sdw_intel *sdw)
 {
 	unsigned int link_id = sdw->instance;
-	void __iomem *shim = sdw->res->shim;
+	void __iomem *shim = sdw->link_res->shim;
 	int spa_mask, cpa_mask;
 	int link_control, ret;
 
@@ -309,7 +309,7 @@ static int intel_link_power_up(struct sdw_intel *sdw)
 
 static int intel_shim_init(struct sdw_intel *sdw)
 {
-	void __iomem *shim = sdw->res->shim;
+	void __iomem *shim = sdw->link_res->shim;
 	unsigned int link_id = sdw->instance;
 	int sync_reg, ret;
 	u16 ioctl = 0, act = 0;
@@ -370,7 +370,7 @@ static int intel_shim_init(struct sdw_intel *sdw)
 static void intel_pdi_init(struct sdw_intel *sdw,
 			   struct sdw_cdns_stream_config *config)
 {
-	void __iomem *shim = sdw->res->shim;
+	void __iomem *shim = sdw->link_res->shim;
 	unsigned int link_id = sdw->instance;
 	int pcm_cap, pdm_cap;
 
@@ -404,7 +404,7 @@ static void intel_pdi_init(struct sdw_intel *sdw,
 static int
 intel_pdi_get_ch_cap(struct sdw_intel *sdw, unsigned int pdi_num, bool pcm)
 {
-	void __iomem *shim = sdw->res->shim;
+	void __iomem *shim = sdw->link_res->shim;
 	unsigned int link_id = sdw->instance;
 	int count;
 
@@ -476,7 +476,7 @@ static int intel_pdi_ch_update(struct sdw_intel *sdw)
 static void
 intel_pdi_shim_configure(struct sdw_intel *sdw, struct sdw_cdns_pdi *pdi)
 {
-	void __iomem *shim = sdw->res->shim;
+	void __iomem *shim = sdw->link_res->shim;
 	unsigned int link_id = sdw->instance;
 	int pdi_conf = 0;
 
@@ -508,7 +508,7 @@ intel_pdi_shim_configure(struct sdw_intel *sdw, struct sdw_cdns_pdi *pdi)
 static void
 intel_pdi_alh_configure(struct sdw_intel *sdw, struct sdw_cdns_pdi *pdi)
 {
-	void __iomem *alh = sdw->res->alh;
+	void __iomem *alh = sdw->link_res->alh;
 	unsigned int link_id = sdw->instance;
 	unsigned int conf;
 
@@ -535,7 +535,7 @@ static int intel_params_stream(struct sdw_intel *sdw,
 			       struct snd_pcm_hw_params *hw_params,
 			       int link_id, int alh_stream_id)
 {
-	struct sdw_intel_link_res *res = sdw->res;
+	struct sdw_intel_link_res *res = sdw->link_res;
 	struct sdw_intel_stream_params_data params_data;
 
 	params_data.substream = substream;
@@ -550,6 +550,25 @@ static int intel_params_stream(struct sdw_intel *sdw,
 	return -EIO;
 }
 
+static int intel_free_stream(struct sdw_intel *sdw,
+			     struct snd_pcm_substream *substream,
+			     struct snd_soc_dai *dai,
+			     int link_id)
+{
+	struct sdw_intel_link_res *res = sdw->link_res;
+	struct sdw_intel_stream_free_data free_data;
+
+	free_data.substream = substream;
+	free_data.dai = dai;
+	free_data.link_id = link_id;
+
+	if (res->ops && res->ops->free_stream && res->dev)
+		return res->ops->free_stream(res->dev,
+					     &free_data);
+
+	return 0;
+}
+
 /*
  * bank switch routines
  */
@@ -558,7 +577,7 @@ static int intel_pre_bank_switch(struct sdw_bus *bus)
 {
 	struct sdw_cdns *cdns = bus_to_cdns(bus);
 	struct sdw_intel *sdw = cdns_to_intel(cdns);
-	void __iomem *shim = sdw->res->shim;
+	void __iomem *shim = sdw->link_res->shim;
 	int sync_reg;
 
 	/* Write to register only for multi-link */
@@ -577,7 +596,7 @@ static int intel_post_bank_switch(struct sdw_bus *bus)
 {
 	struct sdw_cdns *cdns = bus_to_cdns(bus);
 	struct sdw_intel *sdw = cdns_to_intel(cdns);
-	void __iomem *shim = sdw->res->shim;
+	void __iomem *shim = sdw->link_res->shim;
 	int sync_reg, ret;
 
 	/* Write to register only for multi-link */
@@ -617,6 +636,68 @@ static int intel_post_bank_switch(struct sdw_bus *bus)
  * DAI routines
  */
 
+static int sdw_stream_setup(struct snd_pcm_substream *substream,
+			    struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct sdw_stream_runtime *sdw_stream = NULL;
+	char *name;
+	int i, ret;
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		name = kasprintf(GFP_KERNEL, "%s-Playback", dai->name);
+	else
+		name = kasprintf(GFP_KERNEL, "%s-Capture", dai->name);
+
+	if (!name)
+		return -ENOMEM;
+
+	sdw_stream = sdw_alloc_stream(name);
+	if (!sdw_stream) {
+		dev_err(dai->dev, "alloc stream failed for DAI %s", dai->name);
+		ret = -ENOMEM;
+		goto error;
+	}
+
+	/* Set stream pointer on CPU DAI */
+	ret = snd_soc_dai_set_sdw_stream(dai, sdw_stream, substream->stream);
+	if (ret < 0) {
+		dev_err(dai->dev, "failed to set stream pointer on cpu dai %s",
+			dai->name);
+		goto release_stream;
+	}
+
+	/* Set stream pointer on all CODEC DAIs */
+	for (i = 0; i < rtd->num_codecs; i++) {
+		ret = snd_soc_dai_set_sdw_stream(rtd->codec_dais[i], sdw_stream,
+						 substream->stream);
+		if (ret < 0) {
+			dev_err(dai->dev, "failed to set stream pointer on codec dai %s",
+				rtd->codec_dais[i]->name);
+			goto release_stream;
+		}
+	}
+
+	return 0;
+
+release_stream:
+	sdw_release_stream(sdw_stream);
+error:
+	kfree(name);
+	return ret;
+}
+
+static int intel_startup(struct snd_pcm_substream *substream,
+			 struct snd_soc_dai *dai)
+{
+	/*
+	 * TODO: add pm_runtime support here, the startup callback
+	 * will make sure the IP is 'active'
+	 */
+
+	return sdw_stream_setup(substream, dai);
+}
+
 static int intel_hw_params(struct snd_pcm_substream *substream,
 			   struct snd_pcm_hw_params *params,
 			   struct snd_soc_dai *dai)
@@ -699,10 +780,63 @@ static int intel_hw_params(struct snd_pcm_substream *substream,
 	return ret;
 }
 
+static int intel_prepare(struct snd_pcm_substream *substream,
+			 struct snd_soc_dai *dai)
+{
+	struct sdw_cdns_dma_data *dma;
+
+	dma = snd_soc_dai_get_dma_data(dai, substream);
+	if (!dma) {
+		dev_err(dai->dev, "failed to get dma data in %s",
+			__func__);
+		return -EIO;
+	}
+
+	return sdw_prepare_stream(dma->stream);
+}
+
+static int intel_trigger(struct snd_pcm_substream *substream, int cmd,
+			 struct snd_soc_dai *dai)
+{
+	struct sdw_cdns_dma_data *dma;
+	int ret;
+
+	dma = snd_soc_dai_get_dma_data(dai, substream);
+	if (!dma) {
+		dev_err(dai->dev, "failed to get dma data in %s", __func__);
+		return -EIO;
+	}
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+	case SNDRV_PCM_TRIGGER_RESUME:
+		ret = sdw_enable_stream(dma->stream);
+		break;
+
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_STOP:
+		ret = sdw_disable_stream(dma->stream);
+		break;
+
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	if (ret)
+		dev_err(dai->dev,
+			"%s trigger %d failed: %d",
+			__func__, cmd, ret);
+	return ret;
+}
+
 static int
 intel_hw_free(struct snd_pcm_substream *substream, struct snd_soc_dai *dai)
 {
 	struct sdw_cdns *cdns = snd_soc_dai_get_drvdata(dai);
+	struct sdw_intel *sdw = cdns_to_intel(cdns);
 	struct sdw_cdns_dma_data *dma;
 	int ret;
 
@@ -710,12 +844,29 @@ intel_hw_free(struct snd_pcm_substream *substream, struct snd_soc_dai *dai)
 	if (!dma)
 		return -EIO;
 
+	ret = sdw_deprepare_stream(dma->stream);
+	if (ret) {
+		dev_err(dai->dev, "sdw_deprepare_stream: failed %d", ret);
+		return ret;
+	}
+
 	ret = sdw_stream_remove_master(&cdns->bus, dma->stream);
-	if (ret < 0)
+	if (ret < 0) {
 		dev_err(dai->dev, "remove master from stream %s failed: %d\n",
 			dma->stream->name, ret);
+		return ret;
+	}
 
-	return ret;
+	ret = intel_free_stream(sdw, substream, dai, sdw->instance);
+	if (ret < 0) {
+		dev_err(dai->dev, "intel_free_stream: failed %d", ret);
+		return ret;
+	}
+
+	kfree(dma->stream->name);
+	sdw_release_stream(dma->stream);
+
+	return 0;
 }
 
 static void intel_shutdown(struct snd_pcm_substream *substream,
@@ -744,14 +895,20 @@ static int intel_pdm_set_sdw_stream(struct snd_soc_dai *dai,
 }
 
 static const struct snd_soc_dai_ops intel_pcm_dai_ops = {
+	.startup = intel_startup,
 	.hw_params = intel_hw_params,
+	.prepare = intel_prepare,
+	.trigger = intel_trigger,
 	.hw_free = intel_hw_free,
 	.shutdown = intel_shutdown,
 	.set_sdw_stream = intel_pcm_set_sdw_stream,
 };
 
 static const struct snd_soc_dai_ops intel_pdm_dai_ops = {
+	.startup = intel_startup,
 	.hw_params = intel_hw_params,
+	.prepare = intel_prepare,
+	.trigger = intel_trigger,
 	.hw_free = intel_hw_free,
 	.shutdown = intel_shutdown,
 	.set_sdw_stream = intel_pdm_set_sdw_stream,
@@ -920,7 +1077,7 @@ static int intel_init(struct sdw_intel *sdw)
 	intel_link_power_up(sdw);
 	intel_shim_init(sdw);
 
-	return sdw_cdns_init(&sdw->cdns, false);
+	return sdw_cdns_init(&sdw->cdns);
 }
 
 /*
@@ -937,9 +1094,9 @@ static int intel_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	sdw->instance = pdev->id;
-	sdw->res = dev_get_platdata(&pdev->dev);
+	sdw->link_res = dev_get_platdata(&pdev->dev);
 	sdw->cdns.dev = &pdev->dev;
-	sdw->cdns.registers = sdw->res->registers;
+	sdw->cdns.registers = sdw->link_res->registers;
 	sdw->cdns.instance = sdw->instance;
 	sdw->cdns.msg_count = 0;
 	sdw->cdns.bus.dev = &pdev->dev;
@@ -979,11 +1136,12 @@ static int intel_probe(struct platform_device *pdev)
 	intel_pdi_ch_update(sdw);
 
 	/* Acquire IRQ */
-	ret = request_threaded_irq(sdw->res->irq, sdw_cdns_irq, sdw_cdns_thread,
+	ret = request_threaded_irq(sdw->link_res->irq,
+				   sdw_cdns_irq, sdw_cdns_thread,
 				   IRQF_SHARED, KBUILD_MODNAME, &sdw->cdns);
 	if (ret < 0) {
 		dev_err(sdw->cdns.dev, "unable to grab IRQ %d, disabling device\n",
-			sdw->res->irq);
+			sdw->link_res->irq);
 		goto err_init;
 	}
 
@@ -1013,7 +1171,7 @@ static int intel_probe(struct platform_device *pdev)
 
 err_interrupt:
 	sdw_cdns_enable_interrupt(&sdw->cdns, false);
-	free_irq(sdw->res->irq, sdw);
+	free_irq(sdw->link_res->irq, sdw);
 err_init:
 	sdw_delete_bus_master(&sdw->cdns.bus);
 	return ret;
@@ -1028,7 +1186,7 @@ static int intel_remove(struct platform_device *pdev)
 	if (!sdw->cdns.bus.prop.hw_disabled) {
 		intel_debugfs_exit(sdw);
 		sdw_cdns_enable_interrupt(&sdw->cdns, false);
-		free_irq(sdw->res->irq, sdw);
+		free_irq(sdw->link_res->irq, sdw);
 		snd_soc_unregister_component(sdw->cdns.dev);
 	}
 	sdw_delete_bus_master(&sdw->cdns.bus);
diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c
index 1c6c6a2..d6c9ad2 100644
--- a/drivers/soundwire/qcom.c
+++ b/drivers/soundwire/qcom.c
@@ -588,12 +588,20 @@ static int qcom_swrm_set_sdw_stream(struct snd_soc_dai *dai,
 	return 0;
 }
 
+static void *qcom_swrm_get_sdw_stream(struct snd_soc_dai *dai, int direction)
+{
+	struct qcom_swrm_ctrl *ctrl = dev_get_drvdata(dai->dev);
+
+	return ctrl->sruntime[dai->id];
+}
+
 static int qcom_swrm_startup(struct snd_pcm_substream *substream,
 			     struct snd_soc_dai *dai)
 {
 	struct qcom_swrm_ctrl *ctrl = dev_get_drvdata(dai->dev);
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct sdw_stream_runtime *sruntime;
+	struct snd_soc_dai *codec_dai;
 	int ret, i;
 
 	sruntime = sdw_alloc_stream(dai->name);
@@ -602,12 +610,12 @@ static int qcom_swrm_startup(struct snd_pcm_substream *substream,
 
 	ctrl->sruntime[dai->id] = sruntime;
 
-	for (i = 0; i < rtd->num_codecs; i++) {
-		ret = snd_soc_dai_set_sdw_stream(rtd->codec_dais[i], sruntime,
+	for_each_rtd_codec_dais(rtd, i, codec_dai) {
+		ret = snd_soc_dai_set_sdw_stream(codec_dai, sruntime,
 						 substream->stream);
 		if (ret < 0 && ret != -ENOTSUPP) {
 			dev_err(dai->dev, "Failed to set sdw stream on %s",
-				rtd->codec_dais[i]->name);
+				codec_dai->name);
 			sdw_release_stream(sruntime);
 			return ret;
 		}
@@ -631,6 +639,7 @@ static const struct snd_soc_dai_ops qcom_swrm_pdm_dai_ops = {
 	.startup = qcom_swrm_startup,
 	.shutdown = qcom_swrm_shutdown,
 	.set_sdw_stream = qcom_swrm_set_sdw_stream,
+	.get_sdw_stream = qcom_swrm_get_sdw_stream,
 };
 
 static const struct snd_soc_component_driver qcom_swrm_dai_component = {
diff --git a/drivers/soundwire/slave.c b/drivers/soundwire/slave.c
index 1991997..aace57f 100644
--- a/drivers/soundwire/slave.c
+++ b/drivers/soundwire/slave.c
@@ -46,7 +46,11 @@ static int sdw_slave_add(struct sdw_bus *bus,
 	slave->dev.of_node = of_node_get(to_of_node(fwnode));
 	slave->bus = bus;
 	slave->status = SDW_SLAVE_UNATTACHED;
+	init_completion(&slave->enumeration_complete);
+	init_completion(&slave->initialization_complete);
 	slave->dev_num = 0;
+	init_completion(&slave->probe_complete);
+	slave->probed = false;
 
 	mutex_lock(&bus->bus_lock);
 	list_add_tail(&slave->node, &bus->slaves);
diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c
index 178ae92..a9a7257 100644
--- a/drivers/soundwire/stream.c
+++ b/drivers/soundwire/stream.c
@@ -167,13 +167,15 @@ static int sdw_program_slave_port_params(struct sdw_bus *bus,
 		return ret;
 	}
 
-	/* Program DPN_BlockCtrl1 register */
-	ret = sdw_write(s_rt->slave, addr2, (p_params->bps - 1));
-	if (ret < 0) {
-		dev_err(&s_rt->slave->dev,
-			"DPN_BlockCtrl1 register write failed for port %d\n",
-			t_params->port_num);
-		return ret;
+	if (!dpn_prop->read_only_wordlength) {
+		/* Program DPN_BlockCtrl1 register */
+		ret = sdw_write(s_rt->slave, addr2, (p_params->bps - 1));
+		if (ret < 0) {
+			dev_err(&s_rt->slave->dev,
+				"DPN_BlockCtrl1 register write failed for port %d\n",
+				t_params->port_num);
+			return ret;
+		}
 	}
 
 	/* Program DPN_SampleCtrl1 register */
@@ -313,9 +315,9 @@ static int sdw_enable_disable_slave_ports(struct sdw_bus *bus,
 	 * it is safe to reset this register
 	 */
 	if (en)
-		ret = sdw_update(s_rt->slave, addr, 0xFF, p_rt->ch_mask);
+		ret = sdw_write(s_rt->slave, addr, p_rt->ch_mask);
 	else
-		ret = sdw_update(s_rt->slave, addr, 0xFF, 0x0);
+		ret = sdw_write(s_rt->slave, addr, 0x0);
 
 	if (ret < 0)
 		dev_err(&s_rt->slave->dev,
@@ -464,10 +466,9 @@ static int sdw_prep_deprep_slave_ports(struct sdw_bus *bus,
 		addr = SDW_DPN_PREPARECTRL(p_rt->num);
 
 		if (prep)
-			ret = sdw_update(s_rt->slave, addr,
-					 0xFF, p_rt->ch_mask);
+			ret = sdw_write(s_rt->slave, addr, p_rt->ch_mask);
 		else
-			ret = sdw_update(s_rt->slave, addr, 0xFF, 0x0);
+			ret = sdw_write(s_rt->slave, addr, 0x0);
 
 		if (ret < 0) {
 			dev_err(&s_rt->slave->dev,
@@ -587,10 +588,11 @@ static int sdw_notify_config(struct sdw_master_runtime *m_rt)
 
 		if (slave->ops->bus_config) {
 			ret = slave->ops->bus_config(slave, &bus->params);
-			if (ret < 0)
+			if (ret < 0) {
 				dev_err(bus->dev, "Notify Slave: %d failed\n",
 					slave->dev_num);
-			return ret;
+				return ret;
+			}
 		}
 	}
 
@@ -602,13 +604,25 @@ static int sdw_notify_config(struct sdw_master_runtime *m_rt)
  * and Slave(s)
  *
  * @bus: SDW bus instance
+ * @prepare: true if sdw_program_params() is called by _prepare.
  */
-static int sdw_program_params(struct sdw_bus *bus)
+static int sdw_program_params(struct sdw_bus *bus, bool prepare)
 {
 	struct sdw_master_runtime *m_rt;
 	int ret = 0;
 
 	list_for_each_entry(m_rt, &bus->m_rt_list, bus_node) {
+
+		/*
+		 * this loop walks through all master runtimes for a
+		 * bus, but the ports can only be configured while
+		 * explicitly preparing a stream or handling an
+		 * already-prepared stream otherwise.
+		 */
+		if (!prepare &&
+		    m_rt->stream->state == SDW_STREAM_CONFIGURED)
+			continue;
+
 		ret = sdw_program_port_params(m_rt);
 		if (ret < 0) {
 			dev_err(bus->dev,
@@ -1460,7 +1474,8 @@ static void sdw_release_bus_lock(struct sdw_stream_runtime *stream)
 	}
 }
 
-static int _sdw_prepare_stream(struct sdw_stream_runtime *stream)
+static int _sdw_prepare_stream(struct sdw_stream_runtime *stream,
+			       bool update_params)
 {
 	struct sdw_master_runtime *m_rt;
 	struct sdw_bus *bus = NULL;
@@ -1480,6 +1495,9 @@ static int _sdw_prepare_stream(struct sdw_stream_runtime *stream)
 			return -EINVAL;
 		}
 
+		if (!update_params)
+			goto program_params;
+
 		/* Increment cumulative bus bandwidth */
 		/* TODO: Update this during Device-Device support */
 		bus->params.bandwidth += m_rt->stream->params.rate *
@@ -1495,8 +1513,9 @@ static int _sdw_prepare_stream(struct sdw_stream_runtime *stream)
 			}
 		}
 
+program_params:
 		/* Program params */
-		ret = sdw_program_params(bus);
+		ret = sdw_program_params(bus, true);
 		if (ret < 0) {
 			dev_err(bus->dev, "Program params failed: %d\n", ret);
 			goto restore_params;
@@ -1544,7 +1563,8 @@ static int _sdw_prepare_stream(struct sdw_stream_runtime *stream)
  */
 int sdw_prepare_stream(struct sdw_stream_runtime *stream)
 {
-	int ret = 0;
+	bool update_params = true;
+	int ret;
 
 	if (!stream) {
 		pr_err("SoundWire: Handle not found for stream\n");
@@ -1553,8 +1573,32 @@ int sdw_prepare_stream(struct sdw_stream_runtime *stream)
 
 	sdw_acquire_bus_lock(stream);
 
-	ret = _sdw_prepare_stream(stream);
+	if (stream->state == SDW_STREAM_PREPARED) {
+		ret = 0;
+		goto state_err;
+	}
 
+	if (stream->state != SDW_STREAM_CONFIGURED &&
+	    stream->state != SDW_STREAM_DEPREPARED &&
+	    stream->state != SDW_STREAM_DISABLED) {
+		pr_err("%s: %s: inconsistent state state %d\n",
+		       __func__, stream->name, stream->state);
+		ret = -EINVAL;
+		goto state_err;
+	}
+
+	/*
+	 * when the stream is DISABLED, this means sdw_prepare_stream()
+	 * is called as a result of an underflow or a resume operation.
+	 * In this case, the bus parameters shall not be recomputed, but
+	 * still need to be re-applied
+	 */
+	if (stream->state == SDW_STREAM_DISABLED)
+		update_params = false;
+
+	ret = _sdw_prepare_stream(stream, update_params);
+
+state_err:
 	sdw_release_bus_lock(stream);
 	return ret;
 }
@@ -1571,7 +1615,7 @@ static int _sdw_enable_stream(struct sdw_stream_runtime *stream)
 		bus = m_rt->bus;
 
 		/* Program params */
-		ret = sdw_program_params(bus);
+		ret = sdw_program_params(bus, false);
 		if (ret < 0) {
 			dev_err(bus->dev, "Program params failed: %d\n", ret);
 			return ret;
@@ -1619,8 +1663,17 @@ int sdw_enable_stream(struct sdw_stream_runtime *stream)
 
 	sdw_acquire_bus_lock(stream);
 
+	if (stream->state != SDW_STREAM_PREPARED &&
+	    stream->state != SDW_STREAM_DISABLED) {
+		pr_err("%s: %s: inconsistent state state %d\n",
+		       __func__, stream->name, stream->state);
+		ret = -EINVAL;
+		goto state_err;
+	}
+
 	ret = _sdw_enable_stream(stream);
 
+state_err:
 	sdw_release_bus_lock(stream);
 	return ret;
 }
@@ -1647,7 +1700,7 @@ static int _sdw_disable_stream(struct sdw_stream_runtime *stream)
 		struct sdw_bus *bus = m_rt->bus;
 
 		/* Program params */
-		ret = sdw_program_params(bus);
+		ret = sdw_program_params(bus, false);
 		if (ret < 0) {
 			dev_err(bus->dev, "Program params failed: %d\n", ret);
 			return ret;
@@ -1693,8 +1746,16 @@ int sdw_disable_stream(struct sdw_stream_runtime *stream)
 
 	sdw_acquire_bus_lock(stream);
 
+	if (stream->state != SDW_STREAM_ENABLED) {
+		pr_err("%s: %s: inconsistent state state %d\n",
+		       __func__, stream->name, stream->state);
+		ret = -EINVAL;
+		goto state_err;
+	}
+
 	ret = _sdw_disable_stream(stream);
 
+state_err:
 	sdw_release_bus_lock(stream);
 	return ret;
 }
@@ -1721,7 +1782,7 @@ static int _sdw_deprepare_stream(struct sdw_stream_runtime *stream)
 			m_rt->ch_count * m_rt->stream->params.bps;
 
 		/* Program params */
-		ret = sdw_program_params(bus);
+		ret = sdw_program_params(bus, false);
 		if (ret < 0) {
 			dev_err(bus->dev, "Program params failed: %d\n", ret);
 			return ret;
@@ -1749,8 +1810,18 @@ int sdw_deprepare_stream(struct sdw_stream_runtime *stream)
 	}
 
 	sdw_acquire_bus_lock(stream);
+
+	if (stream->state != SDW_STREAM_PREPARED &&
+	    stream->state != SDW_STREAM_DISABLED) {
+		pr_err("%s: %s: inconsistent state state %d\n",
+		       __func__, stream->name, stream->state);
+		ret = -EINVAL;
+		goto state_err;
+	}
+
 	ret = _sdw_deprepare_stream(stream);
 
+state_err:
 	sdw_release_bus_lock(stream);
 	return ret;
 }
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index efce98e..741b914 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -575,7 +575,7 @@
 
 config SPI_PXA2XX
 	tristate "PXA2xx SSP SPI master"
-	depends on (ARCH_PXA || ARCH_MMP || PCI || ACPI)
+	depends on ARCH_PXA || ARCH_MMP || PCI || ACPI || COMPILE_TEST
 	select PXA_SSP if ARCH_PXA || ARCH_MMP
 	help
 	  This enables using a PXA2xx or Sodaville SSP port as a SPI master
diff --git a/drivers/staging/comedi/drivers/ni_routing/tools/.gitignore b/drivers/staging/comedi/drivers/ni_routing/tools/.gitignore
index ef38008..e3ebffc 100644
--- a/drivers/staging/comedi/drivers/ni_routing/tools/.gitignore
+++ b/drivers/staging/comedi/drivers/ni_routing/tools/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 comedi_h.py
 *.pyc
 ni_values.py
diff --git a/drivers/staging/gasket/gasket_core.c b/drivers/staging/gasket/gasket_core.c
index cd181a6..8e0575f 100644
--- a/drivers/staging/gasket/gasket_core.c
+++ b/drivers/staging/gasket/gasket_core.c
@@ -689,7 +689,7 @@ static bool gasket_mmap_has_permissions(struct gasket_dev *gasket_dev,
 
 	/* Make sure that no wrong flags are set. */
 	requested_permissions =
-		(vma->vm_flags & (VM_WRITE | VM_READ | VM_EXEC));
+		(vma->vm_flags & VM_ACCESS_FLAGS);
 	if (requested_permissions & ~(bar_permissions)) {
 		dev_dbg(gasket_dev->dev,
 			"Attempting to map a region with requested permissions 0x%x, but region has permissions 0x%x.\n",
diff --git a/drivers/staging/greybus/tools/.gitignore b/drivers/staging/greybus/tools/.gitignore
index 023654c..1fd364a 100644
--- a/drivers/staging/greybus/tools/.gitignore
+++ b/drivers/staging/greybus/tools/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 loopback_test
diff --git a/drivers/staging/speakup/devsynth.c b/drivers/staging/speakup/devsynth.c
index d920256..d305716 100644
--- a/drivers/staging/speakup/devsynth.c
+++ b/drivers/staging/speakup/devsynth.c
@@ -1,16 +1,12 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <linux/errno.h>
-#include <linux/miscdevice.h>	/* for misc_register, and SYNTH_MINOR */
+#include <linux/miscdevice.h>	/* for misc_register, and MISC_DYNAMIC_MINOR */
 #include <linux/types.h>
 #include <linux/uaccess.h>
 
 #include "speakup.h"
 #include "spk_priv.h"
 
-#ifndef SYNTH_MINOR
-#define SYNTH_MINOR 25
-#endif
-
 static int misc_registered;
 static int dev_opened;
 
@@ -67,7 +63,7 @@ static const struct file_operations synth_fops = {
 };
 
 static struct miscdevice synth_device = {
-	.minor = SYNTH_MINOR,
+	.minor = MISC_DYNAMIC_MINOR,
 	.name = "synth",
 	.fops = &synth_fops,
 };
@@ -81,7 +77,7 @@ void speakup_register_devsynth(void)
 		pr_warn("Couldn't initialize miscdevice /dev/synth.\n");
 	} else {
 		pr_info("initialized device: /dev/synth, node (MAJOR %d, MINOR %d)\n",
-			MISC_MAJOR, SYNTH_MINOR);
+			MISC_MAJOR, synth_device.minor);
 		misc_registered = 1;
 	}
 }
diff --git a/drivers/staging/speakup/speakup_soft.c b/drivers/staging/speakup/speakup_soft.c
index 28cedae..f591ec0 100644
--- a/drivers/staging/speakup/speakup_soft.c
+++ b/drivers/staging/speakup/speakup_soft.c
@@ -10,7 +10,7 @@
  */
 
 #include <linux/unistd.h>
-#include <linux/miscdevice.h>	/* for misc_register, and SYNTH_MINOR */
+#include <linux/miscdevice.h>	/* for misc_register, and MISC_DYNAMIC_MINOR */
 #include <linux/poll.h>		/* for poll_wait() */
 
 /* schedule(), signal_pending(), TASK_INTERRUPTIBLE */
@@ -20,8 +20,6 @@
 #include "speakup.h"
 
 #define DRV_VERSION "2.6"
-#define SOFTSYNTH_MINOR 26 /* might as well give it one more than /dev/synth */
-#define SOFTSYNTHU_MINOR 27 /* might as well give it one more than /dev/synth */
 #define PROCSPEECH 0x0d
 #define CLEAR_SYNTH 0x18
 
@@ -375,7 +373,7 @@ static int softsynth_probe(struct spk_synth *synth)
 	if (misc_registered != 0)
 		return 0;
 	memset(&synth_device, 0, sizeof(synth_device));
-	synth_device.minor = SOFTSYNTH_MINOR;
+	synth_device.minor = MISC_DYNAMIC_MINOR;
 	synth_device.name = "softsynth";
 	synth_device.fops = &softsynth_fops;
 	if (misc_register(&synth_device)) {
@@ -384,7 +382,7 @@ static int softsynth_probe(struct spk_synth *synth)
 	}
 
 	memset(&synthu_device, 0, sizeof(synthu_device));
-	synthu_device.minor = SOFTSYNTHU_MINOR;
+	synthu_device.minor = MISC_DYNAMIC_MINOR;
 	synthu_device.name = "softsynthu";
 	synthu_device.fops = &softsynthu_fops;
 	if (misc_register(&synthu_device)) {
@@ -393,8 +391,10 @@ static int softsynth_probe(struct spk_synth *synth)
 	}
 
 	misc_registered = 1;
-	pr_info("initialized device: /dev/softsynth, node (MAJOR 10, MINOR 26)\n");
-	pr_info("initialized device: /dev/softsynthu, node (MAJOR 10, MINOR 27)\n");
+	pr_info("initialized device: /dev/softsynth, node (MAJOR 10, MINOR %d)\n",
+		synth_device.minor);
+	pr_info("initialized device: /dev/softsynthu, node (MAJOR 10, MINOR %d)\n",
+		synthu_device.minor);
 	return 0;
 }
 
diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c
index 09e55ea..59379d6 100644
--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -4301,30 +4301,37 @@ int iscsit_close_connection(
 	if (!atomic_read(&sess->session_reinstatement) &&
 	     atomic_read(&sess->session_fall_back_to_erl0)) {
 		spin_unlock_bh(&sess->conn_lock);
+		complete_all(&sess->session_wait_comp);
 		iscsit_close_session(sess);
 
 		return 0;
 	} else if (atomic_read(&sess->session_logout)) {
 		pr_debug("Moving to TARG_SESS_STATE_FREE.\n");
 		sess->session_state = TARG_SESS_STATE_FREE;
-		spin_unlock_bh(&sess->conn_lock);
 
-		if (atomic_read(&sess->sleep_on_sess_wait_comp))
-			complete(&sess->session_wait_comp);
+		if (atomic_read(&sess->session_close)) {
+			spin_unlock_bh(&sess->conn_lock);
+			complete_all(&sess->session_wait_comp);
+			iscsit_close_session(sess);
+		} else {
+			spin_unlock_bh(&sess->conn_lock);
+		}
 
 		return 0;
 	} else {
 		pr_debug("Moving to TARG_SESS_STATE_FAILED.\n");
 		sess->session_state = TARG_SESS_STATE_FAILED;
 
-		if (!atomic_read(&sess->session_continuation)) {
-			spin_unlock_bh(&sess->conn_lock);
+		if (!atomic_read(&sess->session_continuation))
 			iscsit_start_time2retain_handler(sess);
-		} else
-			spin_unlock_bh(&sess->conn_lock);
 
-		if (atomic_read(&sess->sleep_on_sess_wait_comp))
-			complete(&sess->session_wait_comp);
+		if (atomic_read(&sess->session_close)) {
+			spin_unlock_bh(&sess->conn_lock);
+			complete_all(&sess->session_wait_comp);
+			iscsit_close_session(sess);
+		} else {
+			spin_unlock_bh(&sess->conn_lock);
+		}
 
 		return 0;
 	}
@@ -4368,8 +4375,7 @@ int iscsit_close_session(struct iscsi_session *sess)
 	 * restart the timer and exit.
 	 */
 	if (!in_interrupt()) {
-		if (iscsit_check_session_usage_count(sess) == 1)
-			iscsit_stop_session(sess, 1, 1);
+		iscsit_check_session_usage_count(sess);
 	} else {
 		if (iscsit_check_session_usage_count(sess) == 2) {
 			atomic_set(&sess->session_logout, 0);
@@ -4430,9 +4436,9 @@ static void iscsit_logout_post_handler_closesession(
 	complete(&conn->conn_logout_comp);
 
 	iscsit_dec_conn_usage_count(conn);
+	atomic_set(&sess->session_close, 1);
 	iscsit_stop_session(sess, sleep, sleep);
 	iscsit_dec_session_usage_count(sess);
-	iscsit_close_session(sess);
 }
 
 static void iscsit_logout_post_handler_samecid(
@@ -4567,49 +4573,6 @@ void iscsit_fail_session(struct iscsi_session *sess)
 	sess->session_state = TARG_SESS_STATE_FAILED;
 }
 
-int iscsit_free_session(struct iscsi_session *sess)
-{
-	u16 conn_count = atomic_read(&sess->nconn);
-	struct iscsi_conn *conn, *conn_tmp = NULL;
-	int is_last;
-
-	spin_lock_bh(&sess->conn_lock);
-	atomic_set(&sess->sleep_on_sess_wait_comp, 1);
-
-	list_for_each_entry_safe(conn, conn_tmp, &sess->sess_conn_list,
-			conn_list) {
-		if (conn_count == 0)
-			break;
-
-		if (list_is_last(&conn->conn_list, &sess->sess_conn_list)) {
-			is_last = 1;
-		} else {
-			iscsit_inc_conn_usage_count(conn_tmp);
-			is_last = 0;
-		}
-		iscsit_inc_conn_usage_count(conn);
-
-		spin_unlock_bh(&sess->conn_lock);
-		iscsit_cause_connection_reinstatement(conn, 1);
-		spin_lock_bh(&sess->conn_lock);
-
-		iscsit_dec_conn_usage_count(conn);
-		if (is_last == 0)
-			iscsit_dec_conn_usage_count(conn_tmp);
-
-		conn_count--;
-	}
-
-	if (atomic_read(&sess->nconn)) {
-		spin_unlock_bh(&sess->conn_lock);
-		wait_for_completion(&sess->session_wait_comp);
-	} else
-		spin_unlock_bh(&sess->conn_lock);
-
-	iscsit_close_session(sess);
-	return 0;
-}
-
 void iscsit_stop_session(
 	struct iscsi_session *sess,
 	int session_sleep,
@@ -4620,8 +4583,6 @@ void iscsit_stop_session(
 	int is_last;
 
 	spin_lock_bh(&sess->conn_lock);
-	if (session_sleep)
-		atomic_set(&sess->sleep_on_sess_wait_comp, 1);
 
 	if (connection_sleep) {
 		list_for_each_entry_safe(conn, conn_tmp, &sess->sess_conn_list,
@@ -4679,12 +4640,15 @@ int iscsit_release_sessions_for_tpg(struct iscsi_portal_group *tpg, int force)
 		spin_lock(&sess->conn_lock);
 		if (atomic_read(&sess->session_fall_back_to_erl0) ||
 		    atomic_read(&sess->session_logout) ||
+		    atomic_read(&sess->session_close) ||
 		    (sess->time2retain_timer_flags & ISCSI_TF_EXPIRED)) {
 			spin_unlock(&sess->conn_lock);
 			continue;
 		}
+		iscsit_inc_session_usage_count(sess);
 		atomic_set(&sess->session_reinstatement, 1);
 		atomic_set(&sess->session_fall_back_to_erl0, 1);
+		atomic_set(&sess->session_close, 1);
 		spin_unlock(&sess->conn_lock);
 
 		list_move_tail(&se_sess->sess_list, &free_list);
@@ -4694,7 +4658,9 @@ int iscsit_release_sessions_for_tpg(struct iscsi_portal_group *tpg, int force)
 	list_for_each_entry_safe(se_sess, se_sess_tmp, &free_list, sess_list) {
 		sess = (struct iscsi_session *)se_sess->fabric_sess_ptr;
 
-		iscsit_free_session(sess);
+		list_del_init(&se_sess->sess_list);
+		iscsit_stop_session(sess, 1, 1);
+		iscsit_dec_session_usage_count(sess);
 		session_count++;
 	}
 
diff --git a/drivers/target/iscsi/iscsi_target.h b/drivers/target/iscsi/iscsi_target.h
index c95f56a..7409ce2 100644
--- a/drivers/target/iscsi/iscsi_target.h
+++ b/drivers/target/iscsi/iscsi_target.h
@@ -43,7 +43,6 @@ extern int iscsi_target_rx_thread(void *);
 extern int iscsit_close_connection(struct iscsi_conn *);
 extern int iscsit_close_session(struct iscsi_session *);
 extern void iscsit_fail_session(struct iscsi_session *);
-extern int iscsit_free_session(struct iscsi_session *);
 extern void iscsit_stop_session(struct iscsi_session *, int, int);
 extern int iscsit_release_sessions_for_tpg(struct iscsi_portal_group *, int);
 
diff --git a/drivers/target/iscsi/iscsi_target_configfs.c b/drivers/target/iscsi/iscsi_target_configfs.c
index 42b369f..0fa1d57 100644
--- a/drivers/target/iscsi/iscsi_target_configfs.c
+++ b/drivers/target/iscsi/iscsi_target_configfs.c
@@ -1476,20 +1476,23 @@ static void lio_tpg_close_session(struct se_session *se_sess)
 	spin_lock(&sess->conn_lock);
 	if (atomic_read(&sess->session_fall_back_to_erl0) ||
 	    atomic_read(&sess->session_logout) ||
+	    atomic_read(&sess->session_close) ||
 	    (sess->time2retain_timer_flags & ISCSI_TF_EXPIRED)) {
 		spin_unlock(&sess->conn_lock);
 		spin_unlock_bh(&se_tpg->session_lock);
 		return;
 	}
+	iscsit_inc_session_usage_count(sess);
 	atomic_set(&sess->session_reinstatement, 1);
 	atomic_set(&sess->session_fall_back_to_erl0, 1);
+	atomic_set(&sess->session_close, 1);
 	spin_unlock(&sess->conn_lock);
 
 	iscsit_stop_time2retain_timer(sess);
 	spin_unlock_bh(&se_tpg->session_lock);
 
 	iscsit_stop_session(sess, 1, 1);
-	iscsit_close_session(sess);
+	iscsit_dec_session_usage_count(sess);
 }
 
 static u32 lio_tpg_get_inst_index(struct se_portal_group *se_tpg)
diff --git a/drivers/target/iscsi/iscsi_target_login.c b/drivers/target/iscsi/iscsi_target_login.c
index f533308..731ee67 100644
--- a/drivers/target/iscsi/iscsi_target_login.c
+++ b/drivers/target/iscsi/iscsi_target_login.c
@@ -156,6 +156,7 @@ int iscsi_check_for_session_reinstatement(struct iscsi_conn *conn)
 		spin_lock(&sess_p->conn_lock);
 		if (atomic_read(&sess_p->session_fall_back_to_erl0) ||
 		    atomic_read(&sess_p->session_logout) ||
+		    atomic_read(&sess_p->session_close) ||
 		    (sess_p->time2retain_timer_flags & ISCSI_TF_EXPIRED)) {
 			spin_unlock(&sess_p->conn_lock);
 			continue;
@@ -166,6 +167,7 @@ int iscsi_check_for_session_reinstatement(struct iscsi_conn *conn)
 		   (sess_p->sess_ops->SessionType == sessiontype))) {
 			atomic_set(&sess_p->session_reinstatement, 1);
 			atomic_set(&sess_p->session_fall_back_to_erl0, 1);
+			atomic_set(&sess_p->session_close, 1);
 			spin_unlock(&sess_p->conn_lock);
 			iscsit_inc_session_usage_count(sess_p);
 			iscsit_stop_time2retain_timer(sess_p);
@@ -190,7 +192,6 @@ int iscsi_check_for_session_reinstatement(struct iscsi_conn *conn)
 	if (sess->session_state == TARG_SESS_STATE_FAILED) {
 		spin_unlock_bh(&sess->conn_lock);
 		iscsit_dec_session_usage_count(sess);
-		iscsit_close_session(sess);
 		return 0;
 	}
 	spin_unlock_bh(&sess->conn_lock);
@@ -198,7 +199,6 @@ int iscsi_check_for_session_reinstatement(struct iscsi_conn *conn)
 	iscsit_stop_session(sess, 1, 1);
 	iscsit_dec_session_usage_count(sess);
 
-	iscsit_close_session(sess);
 	return 0;
 }
 
@@ -486,6 +486,7 @@ static int iscsi_login_non_zero_tsih_s2(
 		sess_p = (struct iscsi_session *)se_sess->fabric_sess_ptr;
 		if (atomic_read(&sess_p->session_fall_back_to_erl0) ||
 		    atomic_read(&sess_p->session_logout) ||
+		    atomic_read(&sess_p->session_close) ||
 		   (sess_p->time2retain_timer_flags & ISCSI_TF_EXPIRED))
 			continue;
 		if (!memcmp(sess_p->isid, pdu->isid, 6) &&
diff --git a/drivers/target/target_core_configfs.c b/drivers/target/target_core_configfs.c
index e6e1755..ff82b21f 100644
--- a/drivers/target/target_core_configfs.c
+++ b/drivers/target/target_core_configfs.c
@@ -684,7 +684,9 @@ static ssize_t emulate_ua_intlck_ctrl_store(struct config_item *item,
 	if (ret < 0)
 		return ret;
 
-	if (val != 0 && val != 1 && val != 2) {
+	if (val != TARGET_UA_INTLCK_CTRL_CLEAR
+	 && val != TARGET_UA_INTLCK_CTRL_NO_CLEAR
+	 && val != TARGET_UA_INTLCK_CTRL_ESTABLISH_UA) {
 		pr_err("Illegal value %d\n", val);
 		return -EINVAL;
 	}
diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c
index 2d19f0e..4cee113 100644
--- a/drivers/target/target_core_device.c
+++ b/drivers/target/target_core_device.c
@@ -767,7 +767,7 @@ struct se_device *target_alloc_device(struct se_hba *hba, const char *name)
 	dev->dev_attrib.emulate_fua_write = 1;
 	dev->dev_attrib.emulate_fua_read = 1;
 	dev->dev_attrib.emulate_write_cache = DA_EMULATE_WRITE_CACHE;
-	dev->dev_attrib.emulate_ua_intlck_ctrl = DA_EMULATE_UA_INTLLCK_CTRL;
+	dev->dev_attrib.emulate_ua_intlck_ctrl = TARGET_UA_INTLCK_CTRL_CLEAR;
 	dev->dev_attrib.emulate_tas = DA_EMULATE_TAS;
 	dev->dev_attrib.emulate_tpu = DA_EMULATE_TPU;
 	dev->dev_attrib.emulate_tpws = DA_EMULATE_TPWS;
@@ -829,7 +829,7 @@ bool target_configure_unmap_from_queue(struct se_dev_attrib *attrib,
 	attrib->unmap_granularity = q->limits.discard_granularity / block_size;
 	attrib->unmap_granularity_alignment = q->limits.discard_alignment /
 								block_size;
-	attrib->unmap_zeroes_data = (q->limits.max_write_zeroes_sectors);
+	attrib->unmap_zeroes_data = !!(q->limits.max_write_zeroes_sectors);
 	return true;
 }
 EXPORT_SYMBOL(target_configure_unmap_from_queue);
diff --git a/drivers/target/target_core_fabric_lib.c b/drivers/target/target_core_fabric_lib.c
index 6b4b354..1e031d8 100644
--- a/drivers/target/target_core_fabric_lib.c
+++ b/drivers/target/target_core_fabric_lib.c
@@ -63,7 +63,7 @@ static int fc_get_pr_transport_id(
 	 * encoded TransportID.
 	 */
 	ptr = &se_nacl->initiatorname[0];
-	for (i = 0; i < 24; ) {
+	for (i = 0; i < 23; ) {
 		if (!strncmp(&ptr[i], ":", 1)) {
 			i++;
 			continue;
@@ -341,7 +341,8 @@ static char *iscsi_parse_pr_out_transport_id(
 			*p = tolower(*p);
 			p++;
 		}
-	}
+	} else
+		*port_nexus_ptr = NULL;
 
 	return &buf[4];
 }
diff --git a/drivers/target/target_core_spc.c b/drivers/target/target_core_spc.c
index 6d4cf26..ca5579e 100644
--- a/drivers/target/target_core_spc.c
+++ b/drivers/target/target_core_spc.c
@@ -847,8 +847,17 @@ static int spc_modesense_control(struct se_cmd *cmd, u8 pc, u8 *p)
 	 * for a BUSY, TASK SET FULL, or RESERVATION CONFLICT status regardless
 	 * to the number of commands completed with one of those status codes.
 	 */
-	p[4] = (dev->dev_attrib.emulate_ua_intlck_ctrl == 2) ? 0x30 :
-	       (dev->dev_attrib.emulate_ua_intlck_ctrl == 1) ? 0x20 : 0x00;
+	switch (dev->dev_attrib.emulate_ua_intlck_ctrl) {
+	case TARGET_UA_INTLCK_CTRL_ESTABLISH_UA:
+		p[4] = 0x30;
+		break;
+	case TARGET_UA_INTLCK_CTRL_NO_CLEAR:
+		p[4] = 0x20;
+		break;
+	default:	/* TARGET_UA_INTLCK_CTRL_CLEAR */
+		p[4] = 0x00;
+		break;
+	}
 	/*
 	 * From spc4r17, section 7.4.6 Control mode Page
 	 *
diff --git a/drivers/target/target_core_tmr.c b/drivers/target/target_core_tmr.c
index feeba39..afbd492 100644
--- a/drivers/target/target_core_tmr.c
+++ b/drivers/target/target_core_tmr.c
@@ -78,7 +78,7 @@ static int target_check_cdb_and_preempt(struct list_head *list,
 }
 
 static bool __target_check_io_state(struct se_cmd *se_cmd,
-				    struct se_session *tmr_sess, int tas)
+				    struct se_session *tmr_sess, bool tas)
 {
 	struct se_session *sess = se_cmd->se_sess;
 
@@ -251,7 +251,7 @@ static void core_tmr_drain_state_list(
 	struct se_device *dev,
 	struct se_cmd *prout_cmd,
 	struct se_session *tmr_sess,
-	int tas,
+	bool tas,
 	struct list_head *preempt_and_abort_list)
 {
 	LIST_HEAD(drain_task_list);
@@ -334,7 +334,7 @@ int core_tmr_lun_reset(
 	struct se_node_acl *tmr_nacl = NULL;
 	struct se_portal_group *tmr_tpg = NULL;
 	struct se_session *tmr_sess = NULL;
-	int tas;
+	bool tas;
         /*
 	 * TASK_ABORTED status bit, this is configurable via ConfigFS
 	 * struct se_device attributes.  spc4r17 section 7.4.6 Control mode page
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index 0ae9e60..594b724 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -1898,7 +1898,8 @@ void transport_generic_request_failure(struct se_cmd *cmd,
 		 * See spc4r17, section 7.4.6 Control Mode Page, Table 349
 		 */
 		if (cmd->se_sess &&
-		    cmd->se_dev->dev_attrib.emulate_ua_intlck_ctrl == 2) {
+		    cmd->se_dev->dev_attrib.emulate_ua_intlck_ctrl
+					== TARGET_UA_INTLCK_CTRL_ESTABLISH_UA) {
 			target_ua_allocate_lun(cmd->se_sess->se_node_acl,
 					       cmd->orig_fe_lun, 0x2C,
 					ASCQ_2CH_PREVIOUS_RESERVATION_CONFLICT_STATUS);
diff --git a/drivers/target/target_core_ua.c b/drivers/target/target_core_ua.c
index 151b560..4276690 100644
--- a/drivers/target/target_core_ua.c
+++ b/drivers/target/target_core_ua.c
@@ -199,6 +199,8 @@ bool core_scsi3_ua_for_check_condition(struct se_cmd *cmd, u8 *key, u8 *asc,
 	struct se_node_acl *nacl;
 	struct se_ua *ua = NULL, *ua_p;
 	int head = 1;
+	bool dev_ua_intlck_clear = (dev->dev_attrib.emulate_ua_intlck_ctrl
+						== TARGET_UA_INTLCK_CTRL_CLEAR);
 
 	if (WARN_ON_ONCE(!sess))
 		return false;
@@ -229,7 +231,7 @@ bool core_scsi3_ua_for_check_condition(struct se_cmd *cmd, u8 *key, u8 *asc,
 		 * highest priority UNIT_ATTENTION and ASC/ASCQ without
 		 * clearing it.
 		 */
-		if (dev->dev_attrib.emulate_ua_intlck_ctrl != 0) {
+		if (!dev_ua_intlck_clear) {
 			*asc = ua->ua_asc;
 			*ascq = ua->ua_ascq;
 			break;
@@ -254,8 +256,8 @@ bool core_scsi3_ua_for_check_condition(struct se_cmd *cmd, u8 *key, u8 *asc,
 		" INTLCK_CTRL: %d, mapped LUN: %llu, got CDB: 0x%02x"
 		" reported ASC: 0x%02x, ASCQ: 0x%02x\n",
 		nacl->se_tpg->se_tpg_tfo->fabric_name,
-		(dev->dev_attrib.emulate_ua_intlck_ctrl != 0) ? "Reporting" :
-		"Releasing", dev->dev_attrib.emulate_ua_intlck_ctrl,
+		dev_ua_intlck_clear ? "Releasing" : "Reporting",
+		dev->dev_attrib.emulate_ua_intlck_ctrl,
 		cmd->orig_fe_lun, cmd->t_task_cdb[0], *asc, *ascq);
 
 	return head == 0;
diff --git a/drivers/target/target_core_user.c b/drivers/target/target_core_user.c
index 0b9dfa6..f769bb1 100644
--- a/drivers/target/target_core_user.c
+++ b/drivers/target/target_core_user.c
@@ -2073,6 +2073,7 @@ static void tcmu_reset_ring(struct tcmu_dev *udev, u8 err_level)
 	mb->cmd_tail = 0;
 	mb->cmd_head = 0;
 	tcmu_flush_dcache_range(mb, sizeof(*mb));
+	clear_bit(TCMU_DEV_BIT_BROKEN, &udev->flags);
 
 	del_timer(&udev->cmd_timer);
 
diff --git a/drivers/target/target_core_xcopy.c b/drivers/target/target_core_xcopy.c
index 425c107..bd3ed6c 100644
--- a/drivers/target/target_core_xcopy.c
+++ b/drivers/target/target_core_xcopy.c
@@ -134,7 +134,7 @@ static int target_xcopy_parse_tiddesc_e4(struct se_cmd *se_cmd, struct xcopy_op
 	 * Assigned designator
 	 */
 	desig_len = desc[7];
-	if (desig_len != 16) {
+	if (desig_len != XCOPY_NAA_IEEE_REGEX_LEN) {
 		pr_err("XCOPY 0xe4: invalid desig_len: %d\n", (int)desig_len);
 		return -EINVAL;
 	}
@@ -315,11 +315,6 @@ static int target_xcopy_parse_segdesc_02(struct se_cmd *se_cmd, struct xcopy_op
 		xop->nolb, (unsigned long long)xop->src_lba,
 		(unsigned long long)xop->dst_lba);
 
-	if (dc != 0) {
-		xop->dbl = get_unaligned_be24(&desc[29]);
-
-		pr_debug("XCOPY seg desc 0x02: DC=1 w/ dbl: %u\n", xop->dbl);
-	}
 	return 0;
 }
 
@@ -415,7 +410,8 @@ static void xcopy_pt_release_cmd(struct se_cmd *se_cmd)
 	struct xcopy_pt_cmd *xpt_cmd = container_of(se_cmd,
 				struct xcopy_pt_cmd, se_cmd);
 
-	kfree(xpt_cmd);
+	/* xpt_cmd is on the stack, nothing to free here */
+	pr_debug("xpt_cmd done: %p\n", xpt_cmd);
 }
 
 static int xcopy_pt_check_stop_free(struct se_cmd *se_cmd)
@@ -504,7 +500,6 @@ void target_xcopy_release_pt(void)
  * @cdb:	 SCSI CDB to be copied into @xpt_cmd.
  * @remote_port: If false, use the LUN through which the XCOPY command has
  *		 been received. If true, use @se_dev->xcopy_lun.
- * @alloc_mem:	 Whether or not to allocate an SGL list.
  *
  * Set up a SCSI command (READ or WRITE) that will be used to execute an
  * XCOPY command.
@@ -514,12 +509,9 @@ static int target_xcopy_setup_pt_cmd(
 	struct xcopy_op *xop,
 	struct se_device *se_dev,
 	unsigned char *cdb,
-	bool remote_port,
-	bool alloc_mem)
+	bool remote_port)
 {
 	struct se_cmd *cmd = &xpt_cmd->se_cmd;
-	sense_reason_t sense_rc;
-	int ret = 0, rc;
 
 	/*
 	 * Setup LUN+port to honor reservations based upon xop->op_origin for
@@ -535,46 +527,17 @@ static int target_xcopy_setup_pt_cmd(
 	cmd->se_cmd_flags |= SCF_SE_LUN_CMD;
 
 	cmd->tag = 0;
-	sense_rc = target_setup_cmd_from_cdb(cmd, cdb);
-	if (sense_rc) {
-		ret = -EINVAL;
-		goto out;
-	}
+	if (target_setup_cmd_from_cdb(cmd, cdb))
+		return -EINVAL;
 
-	if (alloc_mem) {
-		rc = target_alloc_sgl(&cmd->t_data_sg, &cmd->t_data_nents,
-				      cmd->data_length, false, false);
-		if (rc < 0) {
-			ret = rc;
-			goto out;
-		}
-		/*
-		 * Set this bit so that transport_free_pages() allows the
-		 * caller to release SGLs + physical memory allocated by
-		 * transport_generic_get_mem()..
-		 */
-		cmd->se_cmd_flags |= SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC;
-	} else {
-		/*
-		 * Here the previously allocated SGLs for the internal READ
-		 * are mapped zero-copy to the internal WRITE.
-		 */
-		sense_rc = transport_generic_map_mem_to_cmd(cmd,
-					xop->xop_data_sg, xop->xop_data_nents,
-					NULL, 0);
-		if (sense_rc) {
-			ret = -EINVAL;
-			goto out;
-		}
+	if (transport_generic_map_mem_to_cmd(cmd, xop->xop_data_sg,
+					xop->xop_data_nents, NULL, 0))
+		return -EINVAL;
 
-		pr_debug("Setup PASSTHROUGH_NOALLOC t_data_sg: %p t_data_nents:"
-			 " %u\n", cmd->t_data_sg, cmd->t_data_nents);
-	}
+	pr_debug("Setup PASSTHROUGH_NOALLOC t_data_sg: %p t_data_nents:"
+		 " %u\n", cmd->t_data_sg, cmd->t_data_nents);
 
 	return 0;
-
-out:
-	return ret;
 }
 
 static int target_xcopy_issue_pt_cmd(struct xcopy_pt_cmd *xpt_cmd)
@@ -604,20 +567,15 @@ static int target_xcopy_read_source(
 	sector_t src_lba,
 	u32 src_sectors)
 {
-	struct xcopy_pt_cmd *xpt_cmd;
-	struct se_cmd *se_cmd;
+	struct xcopy_pt_cmd xpt_cmd;
+	struct se_cmd *se_cmd = &xpt_cmd.se_cmd;
 	u32 length = (src_sectors * src_dev->dev_attrib.block_size);
 	int rc;
 	unsigned char cdb[16];
 	bool remote_port = (xop->op_origin == XCOL_DEST_RECV_OP);
 
-	xpt_cmd = kzalloc(sizeof(struct xcopy_pt_cmd), GFP_KERNEL);
-	if (!xpt_cmd) {
-		pr_err("Unable to allocate xcopy_pt_cmd\n");
-		return -ENOMEM;
-	}
-	init_completion(&xpt_cmd->xpt_passthrough_sem);
-	se_cmd = &xpt_cmd->se_cmd;
+	memset(&xpt_cmd, 0, sizeof(xpt_cmd));
+	init_completion(&xpt_cmd.xpt_passthrough_sem);
 
 	memset(&cdb[0], 0, 16);
 	cdb[0] = READ_16;
@@ -627,36 +585,24 @@ static int target_xcopy_read_source(
 		(unsigned long long)src_lba, src_sectors, length);
 
 	transport_init_se_cmd(se_cmd, &xcopy_pt_tfo, &xcopy_pt_sess, length,
-			      DMA_FROM_DEVICE, 0, &xpt_cmd->sense_buffer[0]);
-	xop->src_pt_cmd = xpt_cmd;
+			      DMA_FROM_DEVICE, 0, &xpt_cmd.sense_buffer[0]);
 
-	rc = target_xcopy_setup_pt_cmd(xpt_cmd, xop, src_dev, &cdb[0],
-				remote_port, true);
+	rc = target_xcopy_setup_pt_cmd(&xpt_cmd, xop, src_dev, &cdb[0],
+				remote_port);
 	if (rc < 0) {
-		ec_cmd->scsi_status = xpt_cmd->se_cmd.scsi_status;
-		transport_generic_free_cmd(se_cmd, 0);
-		return rc;
+		ec_cmd->scsi_status = se_cmd->scsi_status;
+		goto out;
 	}
 
-	xop->xop_data_sg = se_cmd->t_data_sg;
-	xop->xop_data_nents = se_cmd->t_data_nents;
 	pr_debug("XCOPY-READ: Saved xop->xop_data_sg: %p, num: %u for READ"
 		" memory\n", xop->xop_data_sg, xop->xop_data_nents);
 
-	rc = target_xcopy_issue_pt_cmd(xpt_cmd);
-	if (rc < 0) {
-		ec_cmd->scsi_status = xpt_cmd->se_cmd.scsi_status;
-		transport_generic_free_cmd(se_cmd, 0);
-		return rc;
-	}
-	/*
-	 * Clear off the allocated t_data_sg, that has been saved for
-	 * zero-copy WRITE submission reuse in struct xcopy_op..
-	 */
-	se_cmd->t_data_sg = NULL;
-	se_cmd->t_data_nents = 0;
-
-	return 0;
+	rc = target_xcopy_issue_pt_cmd(&xpt_cmd);
+	if (rc < 0)
+		ec_cmd->scsi_status = se_cmd->scsi_status;
+out:
+	transport_generic_free_cmd(se_cmd, 0);
+	return rc;
 }
 
 static int target_xcopy_write_destination(
@@ -666,20 +612,15 @@ static int target_xcopy_write_destination(
 	sector_t dst_lba,
 	u32 dst_sectors)
 {
-	struct xcopy_pt_cmd *xpt_cmd;
-	struct se_cmd *se_cmd;
+	struct xcopy_pt_cmd xpt_cmd;
+	struct se_cmd *se_cmd = &xpt_cmd.se_cmd;
 	u32 length = (dst_sectors * dst_dev->dev_attrib.block_size);
 	int rc;
 	unsigned char cdb[16];
 	bool remote_port = (xop->op_origin == XCOL_SOURCE_RECV_OP);
 
-	xpt_cmd = kzalloc(sizeof(struct xcopy_pt_cmd), GFP_KERNEL);
-	if (!xpt_cmd) {
-		pr_err("Unable to allocate xcopy_pt_cmd\n");
-		return -ENOMEM;
-	}
-	init_completion(&xpt_cmd->xpt_passthrough_sem);
-	se_cmd = &xpt_cmd->se_cmd;
+	memset(&xpt_cmd, 0, sizeof(xpt_cmd));
+	init_completion(&xpt_cmd.xpt_passthrough_sem);
 
 	memset(&cdb[0], 0, 16);
 	cdb[0] = WRITE_16;
@@ -689,36 +630,21 @@ static int target_xcopy_write_destination(
 		(unsigned long long)dst_lba, dst_sectors, length);
 
 	transport_init_se_cmd(se_cmd, &xcopy_pt_tfo, &xcopy_pt_sess, length,
-			      DMA_TO_DEVICE, 0, &xpt_cmd->sense_buffer[0]);
-	xop->dst_pt_cmd = xpt_cmd;
+			      DMA_TO_DEVICE, 0, &xpt_cmd.sense_buffer[0]);
 
-	rc = target_xcopy_setup_pt_cmd(xpt_cmd, xop, dst_dev, &cdb[0],
-				remote_port, false);
+	rc = target_xcopy_setup_pt_cmd(&xpt_cmd, xop, dst_dev, &cdb[0],
+				remote_port);
 	if (rc < 0) {
-		struct se_cmd *src_cmd = &xop->src_pt_cmd->se_cmd;
-		ec_cmd->scsi_status = xpt_cmd->se_cmd.scsi_status;
-		/*
-		 * If the failure happened before the t_mem_list hand-off in
-		 * target_xcopy_setup_pt_cmd(), Reset memory + clear flag so that
-		 * core releases this memory on error during X-COPY WRITE I/O.
-		 */
-		src_cmd->se_cmd_flags &= ~SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC;
-		src_cmd->t_data_sg = xop->xop_data_sg;
-		src_cmd->t_data_nents = xop->xop_data_nents;
-
-		transport_generic_free_cmd(se_cmd, 0);
-		return rc;
+		ec_cmd->scsi_status = se_cmd->scsi_status;
+		goto out;
 	}
 
-	rc = target_xcopy_issue_pt_cmd(xpt_cmd);
-	if (rc < 0) {
-		ec_cmd->scsi_status = xpt_cmd->se_cmd.scsi_status;
-		se_cmd->se_cmd_flags &= ~SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC;
-		transport_generic_free_cmd(se_cmd, 0);
-		return rc;
-	}
-
-	return 0;
+	rc = target_xcopy_issue_pt_cmd(&xpt_cmd);
+	if (rc < 0)
+		ec_cmd->scsi_status = se_cmd->scsi_status;
+out:
+	transport_generic_free_cmd(se_cmd, 0);
+	return rc;
 }
 
 static void target_xcopy_do_work(struct work_struct *work)
@@ -729,7 +655,7 @@ static void target_xcopy_do_work(struct work_struct *work)
 	sector_t src_lba, dst_lba, end_lba;
 	unsigned int max_sectors;
 	int rc = 0;
-	unsigned short nolb, cur_nolb, max_nolb, copied_nolb = 0;
+	unsigned short nolb, max_nolb, copied_nolb = 0;
 
 	if (target_parse_xcopy_cmd(xop) != TCM_NO_SENSE)
 		goto err_free;
@@ -759,7 +685,23 @@ static void target_xcopy_do_work(struct work_struct *work)
 			(unsigned long long)src_lba, (unsigned long long)dst_lba);
 
 	while (src_lba < end_lba) {
-		cur_nolb = min(nolb, max_nolb);
+		unsigned short cur_nolb = min(nolb, max_nolb);
+		u32 cur_bytes = cur_nolb * src_dev->dev_attrib.block_size;
+
+		if (cur_bytes != xop->xop_data_bytes) {
+			/*
+			 * (Re)allocate a buffer large enough to hold the XCOPY
+			 * I/O size, which can be reused each read / write loop.
+			 */
+			target_free_sgl(xop->xop_data_sg, xop->xop_data_nents);
+			rc = target_alloc_sgl(&xop->xop_data_sg,
+					      &xop->xop_data_nents,
+					      cur_bytes,
+					      false, false);
+			if (rc < 0)
+				goto out;
+			xop->xop_data_bytes = cur_bytes;
+		}
 
 		pr_debug("target_xcopy_do_work: Calling read src_dev: %p src_lba: %llu,"
 			" cur_nolb: %hu\n", src_dev, (unsigned long long)src_lba, cur_nolb);
@@ -777,10 +719,8 @@ static void target_xcopy_do_work(struct work_struct *work)
 
 		rc = target_xcopy_write_destination(ec_cmd, xop, dst_dev,
 						dst_lba, cur_nolb);
-		if (rc < 0) {
-			transport_generic_free_cmd(&xop->src_pt_cmd->se_cmd, 0);
+		if (rc < 0)
 			goto out;
-		}
 
 		dst_lba += cur_nolb;
 		pr_debug("target_xcopy_do_work: Incremented WRITE dst_lba to %llu\n",
@@ -788,14 +728,10 @@ static void target_xcopy_do_work(struct work_struct *work)
 
 		copied_nolb += cur_nolb;
 		nolb -= cur_nolb;
-
-		transport_generic_free_cmd(&xop->src_pt_cmd->se_cmd, 0);
-		xop->dst_pt_cmd->se_cmd.se_cmd_flags &= ~SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC;
-
-		transport_generic_free_cmd(&xop->dst_pt_cmd->se_cmd, 0);
 	}
 
 	xcopy_pt_undepend_remotedev(xop);
+	target_free_sgl(xop->xop_data_sg, xop->xop_data_nents);
 	kfree(xop);
 
 	pr_debug("target_xcopy_do_work: Final src_lba: %llu, dst_lba: %llu\n",
@@ -809,6 +745,7 @@ static void target_xcopy_do_work(struct work_struct *work)
 
 out:
 	xcopy_pt_undepend_remotedev(xop);
+	target_free_sgl(xop->xop_data_sg, xop->xop_data_nents);
 
 err_free:
 	kfree(xop);
diff --git a/drivers/target/target_core_xcopy.h b/drivers/target/target_core_xcopy.h
index 26ba4c3..c56a1bd 100644
--- a/drivers/target/target_core_xcopy.h
+++ b/drivers/target/target_core_xcopy.h
@@ -5,7 +5,7 @@
 #define XCOPY_TARGET_DESC_LEN		32
 #define XCOPY_SEGMENT_DESC_LEN		28
 #define XCOPY_NAA_IEEE_REGEX_LEN	16
-#define XCOPY_MAX_SECTORS		1024
+#define XCOPY_MAX_SECTORS		4096
 
 /*
  * SPC4r37 6.4.6.1
@@ -18,8 +18,6 @@ enum xcopy_origin_list {
 	XCOL_DEST_RECV_OP = 0x02,
 };
 
-struct xcopy_pt_cmd;
-
 struct xcopy_op {
 	int op_origin;
 
@@ -35,11 +33,8 @@ struct xcopy_op {
 	unsigned short stdi;
 	unsigned short dtdi;
 	unsigned short nolb;
-	unsigned int dbl;
 
-	struct xcopy_pt_cmd *src_pt_cmd;
-	struct xcopy_pt_cmd *dst_pt_cmd;
-
+	u32 xop_data_bytes;
 	u32 xop_data_nents;
 	struct scatterlist *xop_data_sg;
 	struct work_struct xop_work;
diff --git a/drivers/tee/tee_core.c b/drivers/tee/tee_core.c
index 37d22e3..6aec502 100644
--- a/drivers/tee/tee_core.c
+++ b/drivers/tee/tee_core.c
@@ -44,7 +44,6 @@ static struct tee_context *teedev_open(struct tee_device *teedev)
 
 	kref_init(&ctx->refcount);
 	ctx->teedev = teedev;
-	INIT_LIST_HEAD(&ctx->list_shm);
 	rc = teedev->desc->ops->open(ctx);
 	if (rc)
 		goto err;
diff --git a/drivers/tee/tee_private.h b/drivers/tee/tee_private.h
index f797171..e55204d 100644
--- a/drivers/tee/tee_private.h
+++ b/drivers/tee/tee_private.h
@@ -37,7 +37,8 @@ struct tee_shm_pool {
  * @num_users:	number of active users of this device
  * @c_no_user:	completion used when unregistering the device
  * @mutex:	mutex protecting @num_users and @idr
- * @idr:	register of shared memory object allocated on this device
+ * @idr:	register of user space shared memory objects allocated or
+ *		registered on this device
  * @pool:	shared memory pool
  */
 struct tee_device {
diff --git a/drivers/tee/tee_shm.c b/drivers/tee/tee_shm.c
index 937ac5a..bd679b7 100644
--- a/drivers/tee/tee_shm.c
+++ b/drivers/tee/tee_shm.c
@@ -13,13 +13,13 @@
 
 static void tee_shm_release(struct tee_shm *shm)
 {
-	struct tee_device *teedev = shm->teedev;
+	struct tee_device *teedev = shm->ctx->teedev;
 
-	mutex_lock(&teedev->mutex);
-	idr_remove(&teedev->idr, shm->id);
-	if (shm->ctx)
-		list_del(&shm->link);
-	mutex_unlock(&teedev->mutex);
+	if (shm->flags & TEE_SHM_DMA_BUF) {
+		mutex_lock(&teedev->mutex);
+		idr_remove(&teedev->idr, shm->id);
+		mutex_unlock(&teedev->mutex);
+	}
 
 	if (shm->flags & TEE_SHM_POOL) {
 		struct tee_shm_pool_mgr *poolm;
@@ -44,8 +44,7 @@ static void tee_shm_release(struct tee_shm *shm)
 		kfree(shm->pages);
 	}
 
-	if (shm->ctx)
-		teedev_ctx_put(shm->ctx);
+	teedev_ctx_put(shm->ctx);
 
 	kfree(shm);
 
@@ -77,7 +76,7 @@ static int tee_shm_op_mmap(struct dma_buf *dmabuf, struct vm_area_struct *vma)
 	size_t size = vma->vm_end - vma->vm_start;
 
 	/* Refuse sharing shared memory provided by application */
-	if (shm->flags & TEE_SHM_REGISTER)
+	if (shm->flags & TEE_SHM_USER_MAPPED)
 		return -EINVAL;
 
 	return remap_pfn_range(vma, vma->vm_start, shm->paddr >> PAGE_SHIFT,
@@ -91,20 +90,14 @@ static const struct dma_buf_ops tee_shm_dma_buf_ops = {
 	.mmap = tee_shm_op_mmap,
 };
 
-static struct tee_shm *__tee_shm_alloc(struct tee_context *ctx,
-				       struct tee_device *teedev,
-				       size_t size, u32 flags)
+struct tee_shm *tee_shm_alloc(struct tee_context *ctx, size_t size, u32 flags)
 {
+	struct tee_device *teedev = ctx->teedev;
 	struct tee_shm_pool_mgr *poolm = NULL;
 	struct tee_shm *shm;
 	void *ret;
 	int rc;
 
-	if (ctx && ctx->teedev != teedev) {
-		dev_err(teedev->dev.parent, "ctx and teedev mismatch\n");
-		return ERR_PTR(-EINVAL);
-	}
-
 	if (!(flags & TEE_SHM_MAPPED)) {
 		dev_err(teedev->dev.parent,
 			"only mapped allocations supported\n");
@@ -132,7 +125,6 @@ static struct tee_shm *__tee_shm_alloc(struct tee_context *ctx,
 	}
 
 	shm->flags = flags | TEE_SHM_POOL;
-	shm->teedev = teedev;
 	shm->ctx = ctx;
 	if (flags & TEE_SHM_DMA_BUF)
 		poolm = teedev->pool->dma_buf_mgr;
@@ -145,17 +137,18 @@ static struct tee_shm *__tee_shm_alloc(struct tee_context *ctx,
 		goto err_kfree;
 	}
 
-	mutex_lock(&teedev->mutex);
-	shm->id = idr_alloc(&teedev->idr, shm, 1, 0, GFP_KERNEL);
-	mutex_unlock(&teedev->mutex);
-	if (shm->id < 0) {
-		ret = ERR_PTR(shm->id);
-		goto err_pool_free;
-	}
 
 	if (flags & TEE_SHM_DMA_BUF) {
 		DEFINE_DMA_BUF_EXPORT_INFO(exp_info);
 
+		mutex_lock(&teedev->mutex);
+		shm->id = idr_alloc(&teedev->idr, shm, 1, 0, GFP_KERNEL);
+		mutex_unlock(&teedev->mutex);
+		if (shm->id < 0) {
+			ret = ERR_PTR(shm->id);
+			goto err_pool_free;
+		}
+
 		exp_info.ops = &tee_shm_dma_buf_ops;
 		exp_info.size = shm->size;
 		exp_info.flags = O_RDWR;
@@ -168,18 +161,16 @@ static struct tee_shm *__tee_shm_alloc(struct tee_context *ctx,
 		}
 	}
 
-	if (ctx) {
+	if (ctx)
 		teedev_ctx_get(ctx);
-		mutex_lock(&teedev->mutex);
-		list_add_tail(&shm->link, &ctx->list_shm);
-		mutex_unlock(&teedev->mutex);
-	}
 
 	return shm;
 err_rem:
-	mutex_lock(&teedev->mutex);
-	idr_remove(&teedev->idr, shm->id);
-	mutex_unlock(&teedev->mutex);
+	if (flags & TEE_SHM_DMA_BUF) {
+		mutex_lock(&teedev->mutex);
+		idr_remove(&teedev->idr, shm->id);
+		mutex_unlock(&teedev->mutex);
+	}
 err_pool_free:
 	poolm->ops->free(poolm, shm);
 err_kfree:
@@ -188,31 +179,8 @@ static struct tee_shm *__tee_shm_alloc(struct tee_context *ctx,
 	tee_device_put(teedev);
 	return ret;
 }
-
-/**
- * tee_shm_alloc() - Allocate shared memory
- * @ctx:	Context that allocates the shared memory
- * @size:	Requested size of shared memory
- * @flags:	Flags setting properties for the requested shared memory.
- *
- * Memory allocated as global shared memory is automatically freed when the
- * TEE file pointer is closed. The @flags field uses the bits defined by
- * TEE_SHM_* in <linux/tee_drv.h>. TEE_SHM_MAPPED must currently always be
- * set. If TEE_SHM_DMA_BUF global shared memory will be allocated and
- * associated with a dma-buf handle, else driver private memory.
- */
-struct tee_shm *tee_shm_alloc(struct tee_context *ctx, size_t size, u32 flags)
-{
-	return __tee_shm_alloc(ctx, ctx->teedev, size, flags);
-}
 EXPORT_SYMBOL_GPL(tee_shm_alloc);
 
-struct tee_shm *tee_shm_priv_alloc(struct tee_device *teedev, size_t size)
-{
-	return __tee_shm_alloc(NULL, teedev, size, TEE_SHM_MAPPED);
-}
-EXPORT_SYMBOL_GPL(tee_shm_priv_alloc);
-
 struct tee_shm *tee_shm_register(struct tee_context *ctx, unsigned long addr,
 				 size_t length, u32 flags)
 {
@@ -245,7 +213,6 @@ struct tee_shm *tee_shm_register(struct tee_context *ctx, unsigned long addr,
 	}
 
 	shm->flags = flags | TEE_SHM_REGISTER;
-	shm->teedev = teedev;
 	shm->ctx = ctx;
 	shm->id = -1;
 	addr = untagged_addr(addr);
@@ -301,10 +268,6 @@ struct tee_shm *tee_shm_register(struct tee_context *ctx, unsigned long addr,
 		}
 	}
 
-	mutex_lock(&teedev->mutex);
-	list_add_tail(&shm->link, &ctx->list_shm);
-	mutex_unlock(&teedev->mutex);
-
 	return shm;
 err:
 	if (shm) {
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 5a05db5..91af271 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -1,17 +1,18 @@
 # SPDX-License-Identifier: GPL-2.0-only
 #
-# Generic thermal sysfs drivers configuration
+# Generic thermal drivers configuration
 #
 
 menuconfig THERMAL
-	bool "Generic Thermal sysfs driver"
+	bool "Thermal drivers"
 	help
-	  Generic Thermal Sysfs driver offers a generic mechanism for
+	  Thermal drivers offer a generic mechanism for
 	  thermal management. Usually it's made up of one or more thermal
-	  zone and cooling device.
+	  zones and cooling devices.
 	  Each thermal zone contains its own temperature, trip points,
-	  cooling devices.
-	  All platforms with ACPI thermal support can use this driver.
+	  and cooling devices.
+	  All platforms with ACPI or Open Firmware thermal support can use
+	  this driver.
 	  If you want this support, you should say Y here.
 
 if THERMAL
@@ -251,6 +252,27 @@
 	  cpufreq is used as the cooling device to throttle CPUs when the
 	  passive trip is crossed.
 
+config IMX_SC_THERMAL
+	tristate "Temperature sensor driver for NXP i.MX SoCs with System Controller"
+	depends on IMX_SCU
+	depends on OF
+	help
+	  Support for Temperature Monitor (TEMPMON) found on NXP i.MX SoCs with
+	  system controller inside, Linux kernel has to communicate with system
+	  controller via MU (message unit) IPC to get temperature from thermal
+	  sensor. It supports one critical trip point and one
+	  passive trip point for each thermal sensor.
+
+config IMX8MM_THERMAL
+	tristate "Temperature sensor driver for Freescale i.MX8MM SoC"
+	depends on ARCH_MXC || COMPILE_TEST
+	depends on OF
+	help
+	  Support for Thermal Monitoring Unit (TMU) found on Freescale i.MX8MM SoC.
+	  It supports one critical trip point and one passive trip point. The
+	  cpufreq is used as the cooling device to throttle CPUs when the passive
+	  trip is crossed.
+
 config MAX77620_THERMAL
 	tristate "Temperature sensor driver for Maxim MAX77620 PMIC"
 	depends on MFD_MAX77620
@@ -265,6 +287,7 @@
 	tristate "QorIQ Thermal Monitoring Unit"
 	depends on THERMAL_OF
 	depends on HAS_IOMEM
+	select REGMAP_MMIO
 	help
 	  Support for Thermal Monitoring Unit (TMU) found on QorIQ platforms.
 	  It supports one critical trip point and one passive trip point. The
@@ -460,4 +483,11 @@
 	  Enable this to plug in UniPhier on-chip PVT thermal driver into the
 	  thermal framework. The driver supports CPU thermal zone temperature
 	  reporting and a couple of trip points.
+
+config SPRD_THERMAL
+	tristate "Temperature sensor on Spreadtrum SoCs"
+	depends on ARCH_SPRD || COMPILE_TEST
+	help
+	  Support for the Spreadtrum thermal sensor driver in the Linux thermal
+	  framework.
 endif
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index 9fb88e2..8c8ed7b 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -43,6 +43,8 @@
 obj-$(CONFIG_ARMADA_THERMAL)	+= armada_thermal.o
 obj-$(CONFIG_TANGO_THERMAL)	+= tango_thermal.o
 obj-$(CONFIG_IMX_THERMAL)	+= imx_thermal.o
+obj-$(CONFIG_IMX_SC_THERMAL)	+= imx_sc_thermal.o
+obj-$(CONFIG_IMX8MM_THERMAL)	+= imx8mm_thermal.o
 obj-$(CONFIG_MAX77620_THERMAL)	+= max77620_thermal.o
 obj-$(CONFIG_QORIQ_THERMAL)	+= qoriq_thermal.o
 obj-$(CONFIG_DA9062_THERMAL)	+= da9062-thermal.o
@@ -57,3 +59,4 @@
 obj-$(CONFIG_ZX2967_THERMAL)	+= zx2967_thermal.o
 obj-$(CONFIG_UNIPHIER_THERMAL)	+= uniphier_thermal.o
 obj-$(CONFIG_AMLOGIC_THERMAL)     += amlogic_thermal.o
+obj-$(CONFIG_SPRD_THERMAL)	+= sprd_thermal.o
diff --git a/drivers/thermal/cpufreq_cooling.c b/drivers/thermal/cpufreq_cooling.c
index 4ae8c85..e297e13 100644
--- a/drivers/thermal/cpufreq_cooling.c
+++ b/drivers/thermal/cpufreq_cooling.c
@@ -273,7 +273,7 @@ static int cpufreq_state2power(struct thermal_cooling_device *cdev,
 	struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata;
 
 	/* Request state should be less than max_level */
-	if (WARN_ON(state > cpufreq_cdev->max_level))
+	if (state > cpufreq_cdev->max_level)
 		return -EINVAL;
 
 	num_cpus = cpumask_weight(cpufreq_cdev->policy->cpus);
@@ -437,7 +437,7 @@ static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev,
 	int ret;
 
 	/* Request state should be less than max_level */
-	if (WARN_ON(state > cpufreq_cdev->max_level))
+	if (state > cpufreq_cdev->max_level)
 		return -EINVAL;
 
 	/* Check if the old cooling action is same as new cooling action */
@@ -456,6 +456,7 @@ static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev,
 		capacity = frequency * max_capacity;
 		capacity /= cpufreq_cdev->policy->cpuinfo.max_freq;
 		arch_set_thermal_pressure(cpus, max_capacity - capacity);
+		ret = 0;
 	}
 
 	return ret;
diff --git a/drivers/thermal/imx8mm_thermal.c b/drivers/thermal/imx8mm_thermal.c
new file mode 100644
index 0000000..0d60f8d
--- /dev/null
+++ b/drivers/thermal/imx8mm_thermal.c
@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020 NXP.
+ *
+ * Author: Anson Huang <Anson.Huang@nxp.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/thermal.h>
+
+#include "thermal_core.h"
+
+#define TER			0x0	/* TMU enable */
+#define TPS			0x4
+#define TRITSR			0x20	/* TMU immediate temp */
+
+#define TER_EN			BIT(31)
+#define TRITSR_TEMP0_VAL_MASK	0xff
+#define TRITSR_TEMP1_VAL_MASK	0xff0000
+
+#define PROBE_SEL_ALL		GENMASK(31, 30)
+
+#define probe_status_offset(x)	(30 + x)
+#define SIGN_BIT		BIT(7)
+#define TEMP_VAL_MASK		GENMASK(6, 0)
+
+#define VER1_TEMP_LOW_LIMIT	10000
+#define VER2_TEMP_LOW_LIMIT	-40000
+#define VER2_TEMP_HIGH_LIMIT	125000
+
+#define TMU_VER1		0x1
+#define TMU_VER2		0x2
+
+struct thermal_soc_data {
+	u32 num_sensors;
+	u32 version;
+	int (*get_temp)(void *, int *);
+};
+
+struct tmu_sensor {
+	struct imx8mm_tmu *priv;
+	u32 hw_id;
+	struct thermal_zone_device *tzd;
+};
+
+struct imx8mm_tmu {
+	void __iomem *base;
+	struct clk *clk;
+	const struct thermal_soc_data *socdata;
+	struct tmu_sensor sensors[0];
+};
+
+static int imx8mm_tmu_get_temp(void *data, int *temp)
+{
+	struct tmu_sensor *sensor = data;
+	struct imx8mm_tmu *tmu = sensor->priv;
+	u32 val;
+
+	val = readl_relaxed(tmu->base + TRITSR) & TRITSR_TEMP0_VAL_MASK;
+	*temp = val * 1000;
+	if (*temp < VER1_TEMP_LOW_LIMIT)
+		return -EAGAIN;
+
+	return 0;
+}
+
+static int imx8mp_tmu_get_temp(void *data, int *temp)
+{
+	struct tmu_sensor *sensor = data;
+	struct imx8mm_tmu *tmu = sensor->priv;
+	unsigned long val;
+	bool ready;
+
+	val = readl_relaxed(tmu->base + TRITSR);
+	ready = test_bit(probe_status_offset(sensor->hw_id), &val);
+	if (!ready)
+		return -EAGAIN;
+
+	val = sensor->hw_id ? FIELD_GET(TRITSR_TEMP1_VAL_MASK, val) :
+	      FIELD_GET(TRITSR_TEMP0_VAL_MASK, val);
+	if (val & SIGN_BIT) /* negative */
+		val = (~(val & TEMP_VAL_MASK) + 1);
+
+	*temp = val * 1000;
+	if (*temp < VER2_TEMP_LOW_LIMIT || *temp > VER2_TEMP_HIGH_LIMIT)
+		return -EAGAIN;
+
+	return 0;
+}
+
+static int tmu_get_temp(void *data, int *temp)
+{
+	struct tmu_sensor *sensor = data;
+	struct imx8mm_tmu *tmu = sensor->priv;
+
+	return tmu->socdata->get_temp(data, temp);
+}
+
+static struct thermal_zone_of_device_ops tmu_tz_ops = {
+	.get_temp = tmu_get_temp,
+};
+
+static void imx8mm_tmu_enable(struct imx8mm_tmu *tmu, bool enable)
+{
+	u32 val;
+
+	val = readl_relaxed(tmu->base + TER);
+	val = enable ? (val | TER_EN) : (val & ~TER_EN);
+	writel_relaxed(val, tmu->base + TER);
+}
+
+static void imx8mm_tmu_probe_sel_all(struct imx8mm_tmu *tmu)
+{
+	u32 val;
+
+	val = readl_relaxed(tmu->base + TPS);
+	val |= PROBE_SEL_ALL;
+	writel_relaxed(val, tmu->base + TPS);
+}
+
+static int imx8mm_tmu_probe(struct platform_device *pdev)
+{
+	const struct thermal_soc_data *data;
+	struct imx8mm_tmu *tmu;
+	int ret;
+	int i;
+
+	data = of_device_get_match_data(&pdev->dev);
+
+	tmu = devm_kzalloc(&pdev->dev, struct_size(tmu, sensors,
+			   data->num_sensors), GFP_KERNEL);
+	if (!tmu)
+		return -ENOMEM;
+
+	tmu->socdata = data;
+
+	tmu->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(tmu->base))
+		return PTR_ERR(tmu->base);
+
+	tmu->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(tmu->clk)) {
+		ret = PTR_ERR(tmu->clk);
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev,
+				"failed to get tmu clock: %d\n", ret);
+		return ret;
+	}
+
+	ret = clk_prepare_enable(tmu->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable tmu clock: %d\n", ret);
+		return ret;
+	}
+
+	/* disable the monitor during initialization */
+	imx8mm_tmu_enable(tmu, false);
+
+	for (i = 0; i < data->num_sensors; i++) {
+		tmu->sensors[i].priv = tmu;
+		tmu->sensors[i].tzd =
+			devm_thermal_zone_of_sensor_register(&pdev->dev, i,
+							     &tmu->sensors[i],
+							     &tmu_tz_ops);
+		if (IS_ERR(tmu->sensors[i].tzd)) {
+			dev_err(&pdev->dev,
+				"failed to register thermal zone sensor[%d]: %d\n",
+				i, ret);
+			return PTR_ERR(tmu->sensors[i].tzd);
+		}
+		tmu->sensors[i].hw_id = i;
+	}
+
+	platform_set_drvdata(pdev, tmu);
+
+	/* enable all the probes for V2 TMU */
+	if (tmu->socdata->version == TMU_VER2)
+		imx8mm_tmu_probe_sel_all(tmu);
+
+	/* enable the monitor */
+	imx8mm_tmu_enable(tmu, true);
+
+	return 0;
+}
+
+static int imx8mm_tmu_remove(struct platform_device *pdev)
+{
+	struct imx8mm_tmu *tmu = platform_get_drvdata(pdev);
+
+	/* disable TMU */
+	imx8mm_tmu_enable(tmu, false);
+
+	clk_disable_unprepare(tmu->clk);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct thermal_soc_data imx8mm_tmu_data = {
+	.num_sensors = 1,
+	.version = TMU_VER1,
+	.get_temp = imx8mm_tmu_get_temp,
+};
+
+static struct thermal_soc_data imx8mp_tmu_data = {
+	.num_sensors = 2,
+	.version = TMU_VER2,
+	.get_temp = imx8mp_tmu_get_temp,
+};
+
+static const struct of_device_id imx8mm_tmu_table[] = {
+	{ .compatible = "fsl,imx8mm-tmu", .data = &imx8mm_tmu_data, },
+	{ .compatible = "fsl,imx8mp-tmu", .data = &imx8mp_tmu_data, },
+	{ },
+};
+
+static struct platform_driver imx8mm_tmu = {
+	.driver = {
+		.name	= "i.mx8mm_thermal",
+		.of_match_table = imx8mm_tmu_table,
+	},
+	.probe = imx8mm_tmu_probe,
+	.remove = imx8mm_tmu_remove,
+};
+module_platform_driver(imx8mm_tmu);
+
+MODULE_AUTHOR("Anson Huang <Anson.Huang@nxp.com>");
+MODULE_DESCRIPTION("i.MX8MM Thermal Monitor Unit driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/imx_sc_thermal.c b/drivers/thermal/imx_sc_thermal.c
new file mode 100644
index 0000000..a8723b1
--- /dev/null
+++ b/drivers/thermal/imx_sc_thermal.c
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2020 NXP.
+ */
+
+#include <linux/err.h>
+#include <linux/firmware/imx/sci.h>
+#include <linux/firmware/imx/types.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/thermal.h>
+
+#include "thermal_core.h"
+
+#define IMX_SC_MISC_FUNC_GET_TEMP	13
+
+static struct imx_sc_ipc *thermal_ipc_handle;
+
+struct imx_sc_sensor {
+	struct thermal_zone_device *tzd;
+	u32 resource_id;
+};
+
+struct req_get_temp {
+	u16 resource_id;
+	u8 type;
+} __packed __aligned(4);
+
+struct resp_get_temp {
+	s16 celsius;
+	s8 tenths;
+} __packed __aligned(4);
+
+struct imx_sc_msg_misc_get_temp {
+	struct imx_sc_rpc_msg hdr;
+	union {
+		struct req_get_temp req;
+		struct resp_get_temp resp;
+	} data;
+} __packed __aligned(4);
+
+static int imx_sc_thermal_get_temp(void *data, int *temp)
+{
+	struct imx_sc_msg_misc_get_temp msg;
+	struct imx_sc_rpc_msg *hdr = &msg.hdr;
+	struct imx_sc_sensor *sensor = data;
+	int ret;
+
+	msg.data.req.resource_id = sensor->resource_id;
+	msg.data.req.type = IMX_SC_C_TEMP;
+
+	hdr->ver = IMX_SC_RPC_VERSION;
+	hdr->svc = IMX_SC_RPC_SVC_MISC;
+	hdr->func = IMX_SC_MISC_FUNC_GET_TEMP;
+	hdr->size = 2;
+
+	ret = imx_scu_call_rpc(thermal_ipc_handle, &msg, true);
+	if (ret) {
+		dev_err(&sensor->tzd->device, "read temp sensor %d failed, ret %d\n",
+			sensor->resource_id, ret);
+		return ret;
+	}
+
+	*temp = msg.data.resp.celsius * 1000 + msg.data.resp.tenths * 100;
+
+	return 0;
+}
+
+static const struct thermal_zone_of_device_ops imx_sc_thermal_ops = {
+	.get_temp = imx_sc_thermal_get_temp,
+};
+
+static int imx_sc_thermal_probe(struct platform_device *pdev)
+{
+	struct device_node *np, *child, *sensor_np;
+	struct imx_sc_sensor *sensor;
+	int ret;
+
+	ret = imx_scu_get_handle(&thermal_ipc_handle);
+	if (ret)
+		return ret;
+
+	np = of_find_node_by_name(NULL, "thermal-zones");
+	if (!np)
+		return -ENODEV;
+
+	sensor_np = of_node_get(pdev->dev.of_node);
+
+	for_each_available_child_of_node(np, child) {
+		sensor = devm_kzalloc(&pdev->dev, sizeof(*sensor), GFP_KERNEL);
+		if (!sensor) {
+			of_node_put(sensor_np);
+			return -ENOMEM;
+		}
+
+		ret = thermal_zone_of_get_sensor_id(child,
+						    sensor_np,
+						    &sensor->resource_id);
+		if (ret < 0) {
+			dev_err(&pdev->dev,
+				"failed to get valid sensor resource id: %d\n",
+				ret);
+			break;
+		}
+
+		sensor->tzd = devm_thermal_zone_of_sensor_register(&pdev->dev,
+								   sensor->resource_id,
+								   sensor,
+								   &imx_sc_thermal_ops);
+		if (IS_ERR(sensor->tzd)) {
+			dev_err(&pdev->dev, "failed to register thermal zone\n");
+			ret = PTR_ERR(sensor->tzd);
+			break;
+		}
+	}
+
+	of_node_put(sensor_np);
+
+	return ret;
+}
+
+static int imx_sc_thermal_remove(struct platform_device *pdev)
+{
+	return 0;
+}
+
+static const struct of_device_id imx_sc_thermal_table[] = {
+	{ .compatible = "fsl,imx-sc-thermal", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, imx_sc_thermal_table);
+
+static struct platform_driver imx_sc_thermal_driver = {
+		.probe = imx_sc_thermal_probe,
+		.remove	= imx_sc_thermal_remove,
+		.driver = {
+			.name = "imx-sc-thermal",
+			.of_match_table = imx_sc_thermal_table,
+		},
+};
+module_platform_driver(imx_sc_thermal_driver);
+
+MODULE_AUTHOR("Anson Huang <Anson.Huang@nxp.com>");
+MODULE_DESCRIPTION("Thermal driver for NXP i.MX SoCs with system controller");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
index bb6754a..e761c9b 100644
--- a/drivers/thermal/imx_thermal.c
+++ b/drivers/thermal/imx_thermal.c
@@ -3,24 +3,17 @@
 // Copyright 2013 Freescale Semiconductor, Inc.
 
 #include <linux/clk.h>
-#include <linux/cpu.h>
 #include <linux/cpufreq.h>
 #include <linux/cpu_cooling.h>
 #include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
-#include <linux/kernel.h>
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
-#include <linux/platform_device.h>
 #include <linux/regmap.h>
-#include <linux/slab.h>
 #include <linux/thermal.h>
-#include <linux/types.h>
 #include <linux/nvmem-consumer.h>
 
 #define REG_SET		0x4
@@ -872,14 +865,12 @@ static int imx_thermal_remove(struct platform_device *pdev)
 		clk_disable_unprepare(data->thermal_clk);
 
 	thermal_zone_device_unregister(data->tz);
-	cpufreq_cooling_unregister(data->cdev);
-	cpufreq_cpu_put(data->policy);
+	imx_thermal_unregister_legacy_cooling(data);
 
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
-static int imx_thermal_suspend(struct device *dev)
+static int __maybe_unused imx_thermal_suspend(struct device *dev)
 {
 	struct imx_thermal_data *data = dev_get_drvdata(dev);
 	struct regmap *map = data->tempmon;
@@ -900,7 +891,7 @@ static int imx_thermal_suspend(struct device *dev)
 	return 0;
 }
 
-static int imx_thermal_resume(struct device *dev)
+static int __maybe_unused imx_thermal_resume(struct device *dev)
 {
 	struct imx_thermal_data *data = dev_get_drvdata(dev);
 	struct regmap *map = data->tempmon;
@@ -918,7 +909,6 @@ static int imx_thermal_resume(struct device *dev)
 
 	return 0;
 }
-#endif
 
 static SIMPLE_DEV_PM_OPS(imx_thermal_pm_ops,
 			 imx_thermal_suspend, imx_thermal_resume);
diff --git a/drivers/thermal/intel/int340x_thermal/int3400_thermal.c b/drivers/thermal/intel/int340x_thermal/int3400_thermal.c
index efae0c0..ceef89c 100644
--- a/drivers/thermal/intel/int340x_thermal/int3400_thermal.c
+++ b/drivers/thermal/intel/int340x_thermal/int3400_thermal.c
@@ -65,7 +65,7 @@ static ssize_t available_uuids_show(struct device *dev,
 	for (i = 0; i < INT3400_THERMAL_MAXIMUM_UUID; i++) {
 		if (priv->uuid_bitmap & (1 << i))
 			if (PAGE_SIZE - length > 0)
-				length += snprintf(&buf[length],
+				length += scnprintf(&buf[length],
 						   PAGE_SIZE - length,
 						   "%s\n",
 						   int3400_thermal_uuids[i]);
@@ -369,8 +369,8 @@ static int int3400_thermal_remove(struct platform_device *pdev)
 }
 
 static const struct acpi_device_id int3400_thermal_match[] = {
-	{"INT1040", 0},
 	{"INT3400", 0},
+	{"INTC1040", 0},
 	{}
 };
 
diff --git a/drivers/thermal/intel/int340x_thermal/int3403_thermal.c b/drivers/thermal/intel/int340x_thermal/int3403_thermal.c
index aeece1e..f86cbb1 100644
--- a/drivers/thermal/intel/int340x_thermal/int3403_thermal.c
+++ b/drivers/thermal/intel/int340x_thermal/int3403_thermal.c
@@ -282,8 +282,8 @@ static int int3403_remove(struct platform_device *pdev)
 }
 
 static const struct acpi_device_id int3403_device_ids[] = {
-	{"INT1043", 0},
 	{"INT3403", 0},
+	{"INTC1043", 0},
 	{"", 0},
 };
 MODULE_DEVICE_TABLE(acpi, int3403_device_ids);
diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c
index b1fd345..297db1d 100644
--- a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c
+++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c
@@ -45,6 +45,9 @@
 /* JasperLake thermal reporting device */
 #define PCI_DEVICE_ID_PROC_JSL_THERMAL	0x4503
 
+/* TigerLake thermal reporting device */
+#define PCI_DEVICE_ID_PROC_TGL_THERMAL	0x9A03
+
 #define DRV_NAME "proc_thermal"
 
 struct power_config {
@@ -728,6 +731,8 @@ static const struct pci_device_id proc_thermal_pci_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PROC_ICL_THERMAL),
 		.driver_data = (kernel_ulong_t)&rapl_mmio_hsw, },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PROC_JSL_THERMAL)},
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PROC_TGL_THERMAL),
+		.driver_data = (kernel_ulong_t)&rapl_mmio_hsw, },
 	{ 0, },
 };
 
diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c
index ef0baa9..874a47d 100644
--- a/drivers/thermal/of-thermal.c
+++ b/drivers/thermal/of-thermal.c
@@ -449,6 +449,50 @@ thermal_zone_of_add_sensor(struct device_node *zone,
 }
 
 /**
+ * thermal_zone_of_get_sensor_id - get sensor ID from a DT thermal zone
+ * @tz_np: a valid thermal zone device node.
+ * @sensor_np: a sensor node of a valid sensor device.
+ * @id: the sensor ID returned if success.
+ *
+ * This function will get sensor ID from a given thermal zone node and
+ * the sensor node must match the temperature provider @sensor_np.
+ *
+ * Return: 0 on success, proper error code otherwise.
+ */
+
+int thermal_zone_of_get_sensor_id(struct device_node *tz_np,
+				  struct device_node *sensor_np,
+				  u32 *id)
+{
+	struct of_phandle_args sensor_specs;
+	int ret;
+
+	ret = of_parse_phandle_with_args(tz_np,
+					 "thermal-sensors",
+					 "#thermal-sensor-cells",
+					 0,
+					 &sensor_specs);
+	if (ret)
+		return ret;
+
+	if (sensor_specs.np != sensor_np) {
+		of_node_put(sensor_specs.np);
+		return -ENODEV;
+	}
+
+	if (sensor_specs.args_count > 1)
+		pr_warn("%pOFn: too many cells in sensor specifier %d\n",
+		     sensor_specs.np, sensor_specs.args_count);
+
+	*id = sensor_specs.args_count ? sensor_specs.args[0] : 0;
+
+	of_node_put(sensor_specs.np);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(thermal_zone_of_get_sensor_id);
+
+/**
  * thermal_zone_of_sensor_register - registers a sensor to a DT thermal zone
  * @dev: a valid struct device pointer of a sensor device. Must contain
  *       a valid .of_node, for the sensor node.
@@ -499,36 +543,22 @@ thermal_zone_of_sensor_register(struct device *dev, int sensor_id, void *data,
 	sensor_np = of_node_get(dev->of_node);
 
 	for_each_available_child_of_node(np, child) {
-		struct of_phandle_args sensor_specs;
 		int ret, id;
 
 		/* For now, thermal framework supports only 1 sensor per zone */
-		ret = of_parse_phandle_with_args(child, "thermal-sensors",
-						 "#thermal-sensor-cells",
-						 0, &sensor_specs);
+		ret = thermal_zone_of_get_sensor_id(child, sensor_np, &id);
 		if (ret)
 			continue;
 
-		if (sensor_specs.args_count >= 1) {
-			id = sensor_specs.args[0];
-			WARN(sensor_specs.args_count > 1,
-			     "%pOFn: too many cells in sensor specifier %d\n",
-			     sensor_specs.np, sensor_specs.args_count);
-		} else {
-			id = 0;
-		}
-
-		if (sensor_specs.np == sensor_np && id == sensor_id) {
+		if (id == sensor_id) {
 			tzd = thermal_zone_of_add_sensor(child, sensor_np,
 							 data, ops);
 			if (!IS_ERR(tzd))
 				tzd->ops->set_mode(tzd, THERMAL_DEVICE_ENABLED);
 
-			of_node_put(sensor_specs.np);
 			of_node_put(child);
 			goto exit;
 		}
-		of_node_put(sensor_specs.np);
 	}
 exit:
 	of_node_put(sensor_np);
diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c
index fb77acb..2a28a5a 100644
--- a/drivers/thermal/qcom/tsens-8960.c
+++ b/drivers/thermal/qcom/tsens-8960.c
@@ -245,7 +245,7 @@ static inline int code_to_mdegC(u32 adc_code, const struct tsens_sensor *s)
 	return adc_code * slope + offset;
 }
 
-static int get_temp_8960(struct tsens_sensor *s, int *temp)
+static int get_temp_8960(const struct tsens_sensor *s, int *temp)
 {
 	int ret;
 	u32 code, trdy;
@@ -279,7 +279,7 @@ static const struct tsens_ops ops_8960 = {
 	.resume		= resume_8960,
 };
 
-const struct tsens_plat_data data_8960 = {
+struct tsens_plat_data data_8960 = {
 	.num_sensors	= 11,
 	.ops		= &ops_8960,
 };
diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c
index c8d57ee..1725453 100644
--- a/drivers/thermal/qcom/tsens-common.c
+++ b/drivers/thermal/qcom/tsens-common.c
@@ -23,6 +23,10 @@
  * @low_thresh:     lower threshold temperature value
  * @low_irq_mask:   mask register for lower threshold irqs
  * @low_irq_clear:  clear register for lower threshold irqs
+ * @crit_viol:      critical threshold violated
+ * @crit_thresh:    critical threshold temperature value
+ * @crit_irq_mask:  mask register for critical threshold irqs
+ * @crit_irq_clear: clear register for critical threshold irqs
  *
  * Structure containing data about temperature threshold settings and
  * irq status if they were violated.
@@ -36,6 +40,10 @@ struct tsens_irq_data {
 	int low_thresh;
 	u32 low_irq_mask;
 	u32 low_irq_clear;
+	u32 crit_viol;
+	u32 crit_thresh;
+	u32 crit_irq_mask;
+	u32 crit_irq_clear;
 };
 
 char *qfprom_read(struct device *dev, const char *cname)
@@ -128,7 +136,7 @@ static inline int code_to_degc(u32 adc_code, const struct tsens_sensor *s)
  * Return: Temperature in milliCelsius on success, a negative errno will
  * be returned in error cases
  */
-static int tsens_hw_to_mC(struct tsens_sensor *s, int field)
+static int tsens_hw_to_mC(const struct tsens_sensor *s, int field)
 {
 	struct tsens_priv *priv = s->priv;
 	u32 resolution;
@@ -160,7 +168,7 @@ static int tsens_hw_to_mC(struct tsens_sensor *s, int field)
  *
  * Return: ADC code or temperature in deciCelsius.
  */
-static int tsens_mC_to_hw(struct tsens_sensor *s, int temp)
+static int tsens_mC_to_hw(const struct tsens_sensor *s, int temp)
 {
 	struct tsens_priv *priv = s->priv;
 
@@ -189,6 +197,9 @@ static void tsens_set_interrupt_v1(struct tsens_priv *priv, u32 hw_id,
 	case LOWER:
 		index = LOW_INT_CLEAR_0 + hw_id;
 		break;
+	case CRITICAL:
+		/* No critical interrupts before v2 */
+		return;
 	}
 	regmap_field_write(priv->rf[index], enable ? 0 : 1);
 }
@@ -214,6 +225,10 @@ static void tsens_set_interrupt_v2(struct tsens_priv *priv, u32 hw_id,
 		index_mask  = LOW_INT_MASK_0 + hw_id;
 		index_clear = LOW_INT_CLEAR_0 + hw_id;
 		break;
+	case CRITICAL:
+		index_mask  = CRIT_INT_MASK_0 + hw_id;
+		index_clear = CRIT_INT_CLEAR_0 + hw_id;
+		break;
 	}
 
 	if (enable) {
@@ -268,14 +283,23 @@ static int tsens_threshold_violated(struct tsens_priv *priv, u32 hw_id,
 	ret = regmap_field_read(priv->rf[LOWER_STATUS_0 + hw_id], &d->low_viol);
 	if (ret)
 		return ret;
-	if (d->up_viol || d->low_viol)
+
+	if (priv->feat->crit_int) {
+		ret = regmap_field_read(priv->rf[CRITICAL_STATUS_0 + hw_id],
+					&d->crit_viol);
+		if (ret)
+			return ret;
+	}
+
+	if (d->up_viol || d->low_viol || d->crit_viol)
 		return 1;
 
 	return 0;
 }
 
 static int tsens_read_irq_state(struct tsens_priv *priv, u32 hw_id,
-				struct tsens_sensor *s, struct tsens_irq_data *d)
+				const struct tsens_sensor *s,
+				struct tsens_irq_data *d)
 {
 	int ret;
 
@@ -292,22 +316,37 @@ static int tsens_read_irq_state(struct tsens_priv *priv, u32 hw_id,
 		ret = regmap_field_read(priv->rf[LOW_INT_MASK_0 + hw_id], &d->low_irq_mask);
 		if (ret)
 			return ret;
+		ret = regmap_field_read(priv->rf[CRIT_INT_CLEAR_0 + hw_id],
+					&d->crit_irq_clear);
+		if (ret)
+			return ret;
+		ret = regmap_field_read(priv->rf[CRIT_INT_MASK_0 + hw_id],
+					&d->crit_irq_mask);
+		if (ret)
+			return ret;
+
+		d->crit_thresh = tsens_hw_to_mC(s, CRIT_THRESH_0 + hw_id);
 	} else {
 		/* No mask register on older TSENS */
 		d->up_irq_mask = 0;
 		d->low_irq_mask = 0;
+		d->crit_irq_clear = 0;
+		d->crit_irq_mask = 0;
+		d->crit_thresh = 0;
 	}
 
 	d->up_thresh  = tsens_hw_to_mC(s, UP_THRESH_0 + hw_id);
 	d->low_thresh = tsens_hw_to_mC(s, LOW_THRESH_0 + hw_id);
 
-	dev_dbg(priv->dev, "[%u] %s%s: status(%u|%u) | clr(%u|%u) | mask(%u|%u)\n",
-		hw_id, __func__, (d->up_viol || d->low_viol) ? "(V)" : "",
-		d->low_viol, d->up_viol, d->low_irq_clear, d->up_irq_clear,
-		d->low_irq_mask, d->up_irq_mask);
-	dev_dbg(priv->dev, "[%u] %s%s: thresh: (%d:%d)\n", hw_id, __func__,
-		(d->up_viol || d->low_viol) ? "(violation)" : "",
-		d->low_thresh, d->up_thresh);
+	dev_dbg(priv->dev, "[%u] %s%s: status(%u|%u|%u) | clr(%u|%u|%u) | mask(%u|%u|%u)\n",
+		hw_id, __func__,
+		(d->up_viol || d->low_viol || d->crit_viol) ? "(V)" : "",
+		d->low_viol, d->up_viol, d->crit_viol,
+		d->low_irq_clear, d->up_irq_clear, d->crit_irq_clear,
+		d->low_irq_mask, d->up_irq_mask, d->crit_irq_mask);
+	dev_dbg(priv->dev, "[%u] %s%s: thresh: (%d:%d:%d)\n", hw_id, __func__,
+		(d->up_viol || d->low_viol || d->crit_viol) ? "(V)" : "",
+		d->low_thresh, d->up_thresh, d->crit_thresh);
 
 	return 0;
 }
@@ -322,6 +361,76 @@ static inline u32 masked_irq(u32 hw_id, u32 mask, enum tsens_ver ver)
 }
 
 /**
+ * tsens_critical_irq_thread() - Threaded handler for critical interrupts
+ * @irq: irq number
+ * @data: tsens controller private data
+ *
+ * Check FSM watchdog bark status and clear if needed.
+ * Check all sensors to find ones that violated their critical threshold limits.
+ * Clear and then re-enable the interrupt.
+ *
+ * The level-triggered interrupt might deassert if the temperature returned to
+ * within the threshold limits by the time the handler got scheduled. We
+ * consider the irq to have been handled in that case.
+ *
+ * Return: IRQ_HANDLED
+ */
+irqreturn_t tsens_critical_irq_thread(int irq, void *data)
+{
+	struct tsens_priv *priv = data;
+	struct tsens_irq_data d;
+	int temp, ret, i;
+	u32 wdog_status, wdog_count;
+
+	if (priv->feat->has_watchdog) {
+		ret = regmap_field_read(priv->rf[WDOG_BARK_STATUS],
+					&wdog_status);
+		if (ret)
+			return ret;
+
+		if (wdog_status) {
+			/* Clear WDOG interrupt */
+			regmap_field_write(priv->rf[WDOG_BARK_CLEAR], 1);
+			regmap_field_write(priv->rf[WDOG_BARK_CLEAR], 0);
+			ret = regmap_field_read(priv->rf[WDOG_BARK_COUNT],
+						&wdog_count);
+			if (ret)
+				return ret;
+			if (wdog_count)
+				dev_dbg(priv->dev, "%s: watchdog count: %d\n",
+					__func__, wdog_count);
+
+			/* Fall through to handle critical interrupts if any */
+		}
+	}
+
+	for (i = 0; i < priv->num_sensors; i++) {
+		const struct tsens_sensor *s = &priv->sensor[i];
+		u32 hw_id = s->hw_id;
+
+		if (IS_ERR(s->tzd))
+			continue;
+		if (!tsens_threshold_violated(priv, hw_id, &d))
+			continue;
+		ret = get_temp_tsens_valid(s, &temp);
+		if (ret) {
+			dev_err(priv->dev, "[%u] %s: error reading sensor\n",
+				hw_id, __func__);
+			continue;
+		}
+
+		tsens_read_irq_state(priv, hw_id, s, &d);
+		if (d.crit_viol &&
+		    !masked_irq(hw_id, d.crit_irq_mask, tsens_version(priv))) {
+			/* Mask critical interrupts, unused on Linux */
+			tsens_set_interrupt(priv, hw_id, CRITICAL, false);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+/**
  * tsens_irq_thread - Threaded interrupt handler for uplow interrupts
  * @irq: irq number
  * @data: tsens controller private data
@@ -346,10 +455,10 @@ irqreturn_t tsens_irq_thread(int irq, void *data)
 
 	for (i = 0; i < priv->num_sensors; i++) {
 		bool trigger = false;
-		struct tsens_sensor *s = &priv->sensor[i];
+		const struct tsens_sensor *s = &priv->sensor[i];
 		u32 hw_id = s->hw_id;
 
-		if (IS_ERR(priv->sensor[i].tzd))
+		if (IS_ERR(s->tzd))
 			continue;
 		if (!tsens_threshold_violated(priv, hw_id, &d))
 			continue;
@@ -368,7 +477,7 @@ irqreturn_t tsens_irq_thread(int irq, void *data)
 			tsens_set_interrupt(priv, hw_id, UPPER, disable);
 			if (d.up_thresh > temp) {
 				dev_dbg(priv->dev, "[%u] %s: re-arm upper\n",
-					priv->sensor[i].hw_id, __func__);
+					hw_id, __func__);
 				tsens_set_interrupt(priv, hw_id, UPPER, enable);
 			} else {
 				trigger = true;
@@ -379,7 +488,7 @@ irqreturn_t tsens_irq_thread(int irq, void *data)
 			tsens_set_interrupt(priv, hw_id, LOWER, disable);
 			if (d.low_thresh < temp) {
 				dev_dbg(priv->dev, "[%u] %s: re-arm low\n",
-					priv->sensor[i].hw_id, __func__);
+					hw_id, __func__);
 				tsens_set_interrupt(priv, hw_id, LOWER, enable);
 			} else {
 				trigger = true;
@@ -392,7 +501,7 @@ irqreturn_t tsens_irq_thread(int irq, void *data)
 		if (trigger) {
 			dev_dbg(priv->dev, "[%u] %s: TZ update trigger (%d mC)\n",
 				hw_id, __func__, temp);
-			thermal_zone_device_update(priv->sensor[i].tzd,
+			thermal_zone_device_update(s->tzd,
 						   THERMAL_EVENT_UNSPECIFIED);
 		} else {
 			dev_dbg(priv->dev, "[%u] %s: no violation:  %d\n",
@@ -435,7 +544,7 @@ int tsens_set_trips(void *_sensor, int low, int high)
 	spin_unlock_irqrestore(&priv->ul_lock, flags);
 
 	dev_dbg(dev, "[%u] %s: (%d:%d)->(%d:%d)\n",
-		s->hw_id, __func__, d.low_thresh, d.up_thresh, cl_low, cl_high);
+		hw_id, __func__, d.low_thresh, d.up_thresh, cl_low, cl_high);
 
 	return 0;
 }
@@ -457,7 +566,7 @@ void tsens_disable_irq(struct tsens_priv *priv)
 	regmap_field_write(priv->rf[INT_EN], 0);
 }
 
-int get_temp_tsens_valid(struct tsens_sensor *s, int *temp)
+int get_temp_tsens_valid(const struct tsens_sensor *s, int *temp)
 {
 	struct tsens_priv *priv = s->priv;
 	int hw_id = s->hw_id;
@@ -486,7 +595,7 @@ int get_temp_tsens_valid(struct tsens_sensor *s, int *temp)
 	return 0;
 }
 
-int get_temp_common(struct tsens_sensor *s, int *temp)
+int get_temp_common(const struct tsens_sensor *s, int *temp)
 {
 	struct tsens_priv *priv = s->priv;
 	int hw_id = s->hw_id;
@@ -590,6 +699,7 @@ int __init init_common(struct tsens_priv *priv)
 {
 	void __iomem *tm_base, *srot_base;
 	struct device *dev = priv->dev;
+	u32 ver_minor;
 	struct resource *res;
 	u32 enabled;
 	int ret, i, j;
@@ -602,7 +712,7 @@ int __init init_common(struct tsens_priv *priv)
 		/* DT with separate SROT and TM address space */
 		priv->tm_offset = 0;
 		res = platform_get_resource(op, IORESOURCE_MEM, 1);
-		srot_base = devm_ioremap_resource(&op->dev, res);
+		srot_base = devm_ioremap_resource(dev, res);
 		if (IS_ERR(srot_base)) {
 			ret = PTR_ERR(srot_base);
 			goto err_put_device;
@@ -620,7 +730,7 @@ int __init init_common(struct tsens_priv *priv)
 	}
 
 	res = platform_get_resource(op, IORESOURCE_MEM, 0);
-	tm_base = devm_ioremap_resource(&op->dev, res);
+	tm_base = devm_ioremap_resource(dev, res);
 	if (IS_ERR(tm_base)) {
 		ret = PTR_ERR(tm_base);
 		goto err_put_device;
@@ -639,6 +749,9 @@ int __init init_common(struct tsens_priv *priv)
 			if (IS_ERR(priv->rf[i]))
 				return PTR_ERR(priv->rf[i]);
 		}
+		ret = regmap_field_read(priv->rf[VER_MINOR], &ver_minor);
+		if (ret)
+			goto err_put_device;
 	}
 
 	priv->rf[TSENS_EN] = devm_regmap_field_alloc(dev, priv->srot_map,
@@ -683,12 +796,47 @@ int __init init_common(struct tsens_priv *priv)
 		}
 	}
 
+	if (priv->feat->crit_int) {
+		/* Loop might need changes if enum regfield_ids is reordered */
+		for (j = CRITICAL_STATUS_0; j <= CRIT_THRESH_15; j += 16) {
+			for (i = 0; i < priv->feat->max_sensors; i++) {
+				int idx = j + i;
+
+				priv->rf[idx] =
+					devm_regmap_field_alloc(dev,
+								priv->tm_map,
+								priv->fields[idx]);
+				if (IS_ERR(priv->rf[idx])) {
+					ret = PTR_ERR(priv->rf[idx]);
+					goto err_put_device;
+				}
+			}
+		}
+	}
+
+	if (tsens_version(priv) > VER_1_X &&  ver_minor > 2) {
+		/* Watchdog is present only on v2.3+ */
+		priv->feat->has_watchdog = 1;
+		for (i = WDOG_BARK_STATUS; i <= CC_MON_MASK; i++) {
+			priv->rf[i] = devm_regmap_field_alloc(dev, priv->tm_map,
+							      priv->fields[i]);
+			if (IS_ERR(priv->rf[i])) {
+				ret = PTR_ERR(priv->rf[i]);
+				goto err_put_device;
+			}
+		}
+		/*
+		 * Watchdog is already enabled, unmask the bark.
+		 * Disable cycle completion monitoring
+		 */
+		regmap_field_write(priv->rf[WDOG_BARK_MASK], 0);
+		regmap_field_write(priv->rf[CC_MON_MASK], 1);
+	}
+
 	spin_lock_init(&priv->ul_lock);
 	tsens_enable_irq(priv);
 	tsens_debug_init(op);
 
-	return 0;
-
 err_put_device:
 	put_device(&op->dev);
 	return ret;
diff --git a/drivers/thermal/qcom/tsens-v0_1.c b/drivers/thermal/qcom/tsens-v0_1.c
index 4b8dd6d..959a937 100644
--- a/drivers/thermal/qcom/tsens-v0_1.c
+++ b/drivers/thermal/qcom/tsens-v0_1.c
@@ -327,7 +327,7 @@ static int calibrate_8974(struct tsens_priv *priv)
 
 /* v0.1: 8916, 8974 */
 
-static const struct tsens_features tsens_v0_1_feat = {
+static struct tsens_features tsens_v0_1_feat = {
 	.ver_major	= VER_0_1,
 	.crit_int	= 0,
 	.adc		= 1,
@@ -377,7 +377,7 @@ static const struct tsens_ops ops_8916 = {
 	.get_temp	= get_temp_common,
 };
 
-const struct tsens_plat_data data_8916 = {
+struct tsens_plat_data data_8916 = {
 	.num_sensors	= 5,
 	.ops		= &ops_8916,
 	.hw_ids		= (unsigned int []){0, 1, 2, 4, 5 },
@@ -392,7 +392,7 @@ static const struct tsens_ops ops_8974 = {
 	.get_temp	= get_temp_common,
 };
 
-const struct tsens_plat_data data_8974 = {
+struct tsens_plat_data data_8974 = {
 	.num_sensors	= 11,
 	.ops		= &ops_8974,
 	.feat		= &tsens_v0_1_feat,
diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c
index bd2ddb6..b682a4d 100644
--- a/drivers/thermal/qcom/tsens-v1.c
+++ b/drivers/thermal/qcom/tsens-v1.c
@@ -299,7 +299,7 @@ static int calibrate_8976(struct tsens_priv *priv)
 
 /* v1.x: msm8956,8976,qcs404,405 */
 
-static const struct tsens_features tsens_v1_feat = {
+static struct tsens_features tsens_v1_feat = {
 	.ver_major	= VER_1_X,
 	.crit_int	= 0,
 	.adc		= 1,
@@ -368,7 +368,7 @@ static const struct tsens_ops ops_generic_v1 = {
 	.get_temp	= get_temp_tsens_valid,
 };
 
-const struct tsens_plat_data data_tsens_v1 = {
+struct tsens_plat_data data_tsens_v1 = {
 	.ops		= &ops_generic_v1,
 	.feat		= &tsens_v1_feat,
 	.fields	= tsens_v1_regfields,
@@ -381,7 +381,7 @@ static const struct tsens_ops ops_8976 = {
 };
 
 /* Valid for both MSM8956 and MSM8976. Sensor ID 3 is unused. */
-const struct tsens_plat_data data_8976 = {
+struct tsens_plat_data data_8976 = {
 	.num_sensors	= 11,
 	.ops		= &ops_8976,
 	.hw_ids		= (unsigned int[]){0, 1, 2, 4, 5, 6, 7, 8, 9, 10},
diff --git a/drivers/thermal/qcom/tsens-v2.c b/drivers/thermal/qcom/tsens-v2.c
index a4d15e1..b293ed3 100644
--- a/drivers/thermal/qcom/tsens-v2.c
+++ b/drivers/thermal/qcom/tsens-v2.c
@@ -24,10 +24,11 @@
 #define TM_Sn_CRITICAL_THRESHOLD_OFF	0x0060
 #define TM_Sn_STATUS_OFF		0x00a0
 #define TM_TRDY_OFF			0x00e4
+#define TM_WDOG_LOG_OFF		0x013c
 
 /* v2.x: 8996, 8998, sdm845 */
 
-static const struct tsens_features tsens_v2_feat = {
+static struct tsens_features tsens_v2_feat = {
 	.ver_major	= VER_2_X,
 	.crit_int	= 1,
 	.adc		= 0,
@@ -51,8 +52,9 @@ static const struct reg_field tsens_v2_regfields[MAX_REGFIELDS] = {
 	[INT_EN]  = REG_FIELD(TM_INT_EN_OFF, 0, 2),
 
 	/* TEMPERATURE THRESHOLDS */
-	REG_FIELD_FOR_EACH_SENSOR16(LOW_THRESH, TM_Sn_UPPER_LOWER_THRESHOLD_OFF,  0,  11),
-	REG_FIELD_FOR_EACH_SENSOR16(UP_THRESH,  TM_Sn_UPPER_LOWER_THRESHOLD_OFF, 12,  23),
+	REG_FIELD_FOR_EACH_SENSOR16(LOW_THRESH,  TM_Sn_UPPER_LOWER_THRESHOLD_OFF,  0,  11),
+	REG_FIELD_FOR_EACH_SENSOR16(UP_THRESH,   TM_Sn_UPPER_LOWER_THRESHOLD_OFF, 12,  23),
+	REG_FIELD_FOR_EACH_SENSOR16(CRIT_THRESH, TM_Sn_CRITICAL_THRESHOLD_OFF,     0,  11),
 
 	/* INTERRUPTS [CLEAR/STATUS/MASK] */
 	REG_FIELD_SPLIT_BITS_0_15(LOW_INT_STATUS,  TM_UPPER_LOWER_INT_STATUS_OFF),
@@ -61,6 +63,18 @@ static const struct reg_field tsens_v2_regfields[MAX_REGFIELDS] = {
 	REG_FIELD_SPLIT_BITS_16_31(UP_INT_STATUS,  TM_UPPER_LOWER_INT_STATUS_OFF),
 	REG_FIELD_SPLIT_BITS_16_31(UP_INT_CLEAR,   TM_UPPER_LOWER_INT_CLEAR_OFF),
 	REG_FIELD_SPLIT_BITS_16_31(UP_INT_MASK,    TM_UPPER_LOWER_INT_MASK_OFF),
+	REG_FIELD_SPLIT_BITS_0_15(CRIT_INT_STATUS, TM_CRITICAL_INT_STATUS_OFF),
+	REG_FIELD_SPLIT_BITS_0_15(CRIT_INT_CLEAR,  TM_CRITICAL_INT_CLEAR_OFF),
+	REG_FIELD_SPLIT_BITS_0_15(CRIT_INT_MASK,   TM_CRITICAL_INT_MASK_OFF),
+
+	/* WATCHDOG on v2.3 or later */
+	[WDOG_BARK_STATUS] = REG_FIELD(TM_CRITICAL_INT_STATUS_OFF, 31, 31),
+	[WDOG_BARK_CLEAR]  = REG_FIELD(TM_CRITICAL_INT_CLEAR_OFF,  31, 31),
+	[WDOG_BARK_MASK]   = REG_FIELD(TM_CRITICAL_INT_MASK_OFF,   31, 31),
+	[CC_MON_STATUS]    = REG_FIELD(TM_CRITICAL_INT_STATUS_OFF, 30, 30),
+	[CC_MON_CLEAR]     = REG_FIELD(TM_CRITICAL_INT_CLEAR_OFF,  30, 30),
+	[CC_MON_MASK]      = REG_FIELD(TM_CRITICAL_INT_MASK_OFF,   30, 30),
+	[WDOG_BARK_COUNT]  = REG_FIELD(TM_WDOG_LOG_OFF,             0,  7),
 
 	/* Sn_STATUS */
 	REG_FIELD_FOR_EACH_SENSOR16(LAST_TEMP,       TM_Sn_STATUS_OFF,  0,  11),
@@ -81,14 +95,14 @@ static const struct tsens_ops ops_generic_v2 = {
 	.get_temp	= get_temp_tsens_valid,
 };
 
-const struct tsens_plat_data data_tsens_v2 = {
+struct tsens_plat_data data_tsens_v2 = {
 	.ops		= &ops_generic_v2,
 	.feat		= &tsens_v2_feat,
 	.fields	= tsens_v2_regfields,
 };
 
 /* Kept around for backward compatibility with old msm8996.dtsi */
-const struct tsens_plat_data data_8996 = {
+struct tsens_plat_data data_8996 = {
 	.num_sensors	= 13,
 	.ops		= &ops_generic_v2,
 	.feat		= &tsens_v2_feat,
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index 0e7cf52..2f77d23 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -85,11 +85,42 @@ static const struct thermal_zone_of_device_ops tsens_of_ops = {
 	.set_trips = tsens_set_trips,
 };
 
+static int tsens_register_irq(struct tsens_priv *priv, char *irqname,
+			      irq_handler_t thread_fn)
+{
+	struct platform_device *pdev;
+	int ret, irq;
+
+	pdev = of_find_device_by_node(priv->dev->of_node);
+	if (!pdev)
+		return -ENODEV;
+
+	irq = platform_get_irq_byname(pdev, irqname);
+	if (irq < 0) {
+		ret = irq;
+		/* For old DTs with no IRQ defined */
+		if (irq == -ENXIO)
+			ret = 0;
+	} else {
+		ret = devm_request_threaded_irq(&pdev->dev, irq,
+						NULL, thread_fn,
+						IRQF_ONESHOT,
+						dev_name(&pdev->dev), priv);
+		if (ret)
+			dev_err(&pdev->dev, "%s: failed to get irq\n",
+				__func__);
+		else
+			enable_irq_wake(irq);
+	}
+
+	put_device(&pdev->dev);
+	return ret;
+}
+
 static int tsens_register(struct tsens_priv *priv)
 {
-	int i, ret, irq;
+	int i, ret;
 	struct thermal_zone_device *tzd;
-	struct platform_device *pdev;
 
 	for (i = 0;  i < priv->num_sensors; i++) {
 		priv->sensor[i].priv = priv;
@@ -103,32 +134,14 @@ static int tsens_register(struct tsens_priv *priv)
 			priv->ops->enable(priv, i);
 	}
 
-	pdev = of_find_device_by_node(priv->dev->of_node);
-	if (!pdev)
-		return -ENODEV;
+	ret = tsens_register_irq(priv, "uplow", tsens_irq_thread);
+	if (ret < 0)
+		return ret;
 
-	irq = platform_get_irq_byname(pdev, "uplow");
-	if (irq < 0) {
-		ret = irq;
-		/* For old DTs with no IRQ defined */
-		if (irq == -ENXIO)
-			ret = 0;
-		goto err_put_device;
-	}
+	if (priv->feat->crit_int)
+		ret = tsens_register_irq(priv, "critical",
+					 tsens_critical_irq_thread);
 
-	ret = devm_request_threaded_irq(&pdev->dev, irq,
-					NULL, tsens_irq_thread,
-					IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
-					dev_name(&pdev->dev), priv);
-	if (ret) {
-		dev_err(&pdev->dev, "%s: failed to get irq\n", __func__);
-		goto err_put_device;
-	}
-
-	enable_irq_wake(irq);
-
-err_put_device:
-	put_device(&pdev->dev);
 	return ret;
 }
 
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
index e24a865..502acf0 100644
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -23,6 +23,7 @@
 
 struct tsens_priv;
 
+/* IP version numbers in ascending order */
 enum tsens_ver {
 	VER_0_1 = 0,
 	VER_1_X,
@@ -32,6 +33,7 @@ enum tsens_ver {
 enum tsens_irq_type {
 	LOWER,
 	UPPER,
+	CRITICAL,
 };
 
 /**
@@ -67,7 +69,7 @@ struct tsens_ops {
 	/* mandatory callbacks */
 	int (*init)(struct tsens_priv *priv);
 	int (*calibrate)(struct tsens_priv *priv);
-	int (*get_temp)(struct tsens_sensor *s, int *temp);
+	int (*get_temp)(const struct tsens_sensor *s, int *temp);
 	/* optional callbacks */
 	int (*enable)(struct tsens_priv *priv, int i);
 	void (*disable)(struct tsens_priv *priv);
@@ -374,6 +376,82 @@ enum regfield_ids {
 	CRITICAL_STATUS_13,
 	CRITICAL_STATUS_14,
 	CRITICAL_STATUS_15,
+	CRIT_INT_STATUS_0,	/* CRITICAL interrupt status */
+	CRIT_INT_STATUS_1,
+	CRIT_INT_STATUS_2,
+	CRIT_INT_STATUS_3,
+	CRIT_INT_STATUS_4,
+	CRIT_INT_STATUS_5,
+	CRIT_INT_STATUS_6,
+	CRIT_INT_STATUS_7,
+	CRIT_INT_STATUS_8,
+	CRIT_INT_STATUS_9,
+	CRIT_INT_STATUS_10,
+	CRIT_INT_STATUS_11,
+	CRIT_INT_STATUS_12,
+	CRIT_INT_STATUS_13,
+	CRIT_INT_STATUS_14,
+	CRIT_INT_STATUS_15,
+	CRIT_INT_CLEAR_0,	/* CRITICAL interrupt clear */
+	CRIT_INT_CLEAR_1,
+	CRIT_INT_CLEAR_2,
+	CRIT_INT_CLEAR_3,
+	CRIT_INT_CLEAR_4,
+	CRIT_INT_CLEAR_5,
+	CRIT_INT_CLEAR_6,
+	CRIT_INT_CLEAR_7,
+	CRIT_INT_CLEAR_8,
+	CRIT_INT_CLEAR_9,
+	CRIT_INT_CLEAR_10,
+	CRIT_INT_CLEAR_11,
+	CRIT_INT_CLEAR_12,
+	CRIT_INT_CLEAR_13,
+	CRIT_INT_CLEAR_14,
+	CRIT_INT_CLEAR_15,
+	CRIT_INT_MASK_0,	/* CRITICAL interrupt mask */
+	CRIT_INT_MASK_1,
+	CRIT_INT_MASK_2,
+	CRIT_INT_MASK_3,
+	CRIT_INT_MASK_4,
+	CRIT_INT_MASK_5,
+	CRIT_INT_MASK_6,
+	CRIT_INT_MASK_7,
+	CRIT_INT_MASK_8,
+	CRIT_INT_MASK_9,
+	CRIT_INT_MASK_10,
+	CRIT_INT_MASK_11,
+	CRIT_INT_MASK_12,
+	CRIT_INT_MASK_13,
+	CRIT_INT_MASK_14,
+	CRIT_INT_MASK_15,
+	CRIT_THRESH_0,		/* CRITICAL threshold values */
+	CRIT_THRESH_1,
+	CRIT_THRESH_2,
+	CRIT_THRESH_3,
+	CRIT_THRESH_4,
+	CRIT_THRESH_5,
+	CRIT_THRESH_6,
+	CRIT_THRESH_7,
+	CRIT_THRESH_8,
+	CRIT_THRESH_9,
+	CRIT_THRESH_10,
+	CRIT_THRESH_11,
+	CRIT_THRESH_12,
+	CRIT_THRESH_13,
+	CRIT_THRESH_14,
+	CRIT_THRESH_15,
+
+	/* WATCHDOG */
+	WDOG_BARK_STATUS,
+	WDOG_BARK_CLEAR,
+	WDOG_BARK_MASK,
+	WDOG_BARK_COUNT,
+
+	/* CYCLE COMPLETION MONITOR */
+	CC_MON_STATUS,
+	CC_MON_CLEAR,
+	CC_MON_MASK,
+
 	MIN_STATUS_0,		/* MIN threshold violated */
 	MIN_STATUS_1,
 	MIN_STATUS_2,
@@ -418,6 +496,7 @@ enum regfield_ids {
  * @adc:      do the sensors only output adc code (instead of temperature)?
  * @srot_split: does the IP neatly splits the register space into SROT and TM,
  *              with SROT only being available to secure boot firmware?
+ * @has_watchdog: does this IP support watchdog functionality?
  * @max_sensors: maximum sensors supported by this version of the IP
  */
 struct tsens_features {
@@ -425,6 +504,7 @@ struct tsens_features {
 	unsigned int crit_int:1;
 	unsigned int adc:1;
 	unsigned int srot_split:1;
+	unsigned int has_watchdog:1;
 	unsigned int max_sensors;
 };
 
@@ -440,12 +520,14 @@ struct tsens_plat_data {
 	const u32		num_sensors;
 	const struct tsens_ops	*ops;
 	unsigned int		*hw_ids;
-	const struct tsens_features	*feat;
+	struct tsens_features	*feat;
 	const struct reg_field		*fields;
 };
 
 /**
  * struct tsens_context - Registers to be saved/restored across a context loss
+ * @threshold: Threshold register value
+ * @control: Control register value
  */
 struct tsens_context {
 	int	threshold;
@@ -460,6 +542,8 @@ struct tsens_context {
  * @srot_map: pointer to SROT register address space
  * @tm_offset: deal with old device trees that don't address TM and SROT
  *             address space separately
+ * @ul_lock: lock while processing upper/lower threshold interrupts
+ * @crit_lock: lock while processing critical threshold interrupts
  * @rf: array of regmap_fields used to store value of the field
  * @ctx: registers to be saved and restored during suspend/resume
  * @feat: features of the IP
@@ -481,36 +565,37 @@ struct tsens_priv {
 
 	struct regmap_field		*rf[MAX_REGFIELDS];
 	struct tsens_context		ctx;
-	const struct tsens_features	*feat;
+	struct tsens_features		*feat;
 	const struct reg_field		*fields;
 	const struct tsens_ops		*ops;
 
 	struct dentry			*debug_root;
 	struct dentry			*debug;
 
-	struct tsens_sensor		sensor[0];
+	struct tsens_sensor		sensor[];
 };
 
 char *qfprom_read(struct device *dev, const char *cname);
 void compute_intercept_slope(struct tsens_priv *priv, u32 *pt1, u32 *pt2, u32 mode);
 int init_common(struct tsens_priv *priv);
-int get_temp_tsens_valid(struct tsens_sensor *s, int *temp);
-int get_temp_common(struct tsens_sensor *s, int *temp);
+int get_temp_tsens_valid(const struct tsens_sensor *s, int *temp);
+int get_temp_common(const struct tsens_sensor *s, int *temp);
 int tsens_enable_irq(struct tsens_priv *priv);
 void tsens_disable_irq(struct tsens_priv *priv);
 int tsens_set_trips(void *_sensor, int low, int high);
 irqreturn_t tsens_irq_thread(int irq, void *data);
+irqreturn_t tsens_critical_irq_thread(int irq, void *data);
 
 /* TSENS target */
-extern const struct tsens_plat_data data_8960;
+extern struct tsens_plat_data data_8960;
 
 /* TSENS v0.1 targets */
-extern const struct tsens_plat_data data_8916, data_8974;
+extern struct tsens_plat_data data_8916, data_8974;
 
 /* TSENS v1 targets */
-extern const struct tsens_plat_data data_tsens_v1, data_8976;
+extern struct tsens_plat_data data_tsens_v1, data_8976;
 
 /* TSENS v2 targets */
-extern const struct tsens_plat_data data_8996, data_tsens_v2;
+extern struct tsens_plat_data data_8996, data_tsens_v2;
 
 #endif /* __QCOM_TSENS_H__ */
diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c
index 874bc46..028a6bb 100644
--- a/drivers/thermal/qoriq_thermal.c
+++ b/drivers/thermal/qoriq_thermal.c
@@ -3,12 +3,11 @@
 // Copyright 2016 Freescale Semiconductor, Inc.
 
 #include <linux/clk.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
 #include <linux/err.h>
 #include <linux/io.h>
+#include <linux/module.h>
 #include <linux/of.h>
-#include <linux/of_address.h>
+#include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/sizes.h>
 #include <linux/thermal.h>
@@ -228,6 +227,14 @@ static const struct regmap_access_table qoriq_rd_table = {
 	.n_yes_ranges	= ARRAY_SIZE(qoriq_yes_ranges),
 };
 
+static void qoriq_tmu_action(void *p)
+{
+	struct qoriq_tmu_data *data = p;
+
+	regmap_write(data->regmap, REGS_TMR, TMR_DISABLE);
+	clk_disable_unprepare(data->clk);
+}
+
 static int qoriq_tmu_probe(struct platform_device *pdev)
 {
 	int ret;
@@ -278,6 +285,10 @@ static int qoriq_tmu_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	ret = devm_add_action_or_reset(dev, qoriq_tmu_action, data);
+	if (ret)
+		return ret;
+
 	/* version register offset at: 0xbf8 on both v1 and v2 */
 	ret = regmap_read(data->regmap, REGS_IPBRR(0), &ver);
 	if (ret) {
@@ -290,35 +301,17 @@ static int qoriq_tmu_probe(struct platform_device *pdev)
 
 	ret = qoriq_tmu_calibration(dev, data);	/* TMU calibration */
 	if (ret < 0)
-		goto err;
+		return ret;
 
 	ret = qoriq_tmu_register_tmu_zone(dev, data);
 	if (ret < 0) {
 		dev_err(dev, "Failed to register sensors\n");
-		ret = -ENODEV;
-		goto err;
+		return ret;
 	}
 
 	platform_set_drvdata(pdev, data);
 
 	return 0;
-
-err:
-	clk_disable_unprepare(data->clk);
-
-	return ret;
-}
-
-static int qoriq_tmu_remove(struct platform_device *pdev)
-{
-	struct qoriq_tmu_data *data = platform_get_drvdata(pdev);
-
-	/* Disable monitoring */
-	regmap_write(data->regmap, REGS_TMR, TMR_DISABLE);
-
-	clk_disable_unprepare(data->clk);
-
-	return 0;
 }
 
 static int __maybe_unused qoriq_tmu_suspend(struct device *dev)
@@ -365,7 +358,6 @@ static struct platform_driver qoriq_tmu = {
 		.of_match_table	= qoriq_tmu_match,
 	},
 	.probe	= qoriq_tmu_probe,
-	.remove	= qoriq_tmu_remove,
 };
 module_platform_driver(qoriq_tmu);
 
diff --git a/drivers/thermal/rcar_gen3_thermal.c b/drivers/thermal/rcar_gen3_thermal.c
index 72877bd..58fe7c1 100644
--- a/drivers/thermal/rcar_gen3_thermal.c
+++ b/drivers/thermal/rcar_gen3_thermal.c
@@ -81,8 +81,6 @@ struct rcar_gen3_thermal_tsc {
 	void __iomem *base;
 	struct thermal_zone_device *zone;
 	struct equation_coefs coef;
-	int low;
-	int high;
 	int tj_t;
 	int id; /* thermal channel id */
 };
@@ -204,12 +202,14 @@ static int rcar_gen3_thermal_mcelsius_to_temp(struct rcar_gen3_thermal_tsc *tsc,
 	return INT_FIXPT(val);
 }
 
-static int rcar_gen3_thermal_set_trips(void *devdata, int low, int high)
+static int rcar_gen3_thermal_update_range(struct rcar_gen3_thermal_tsc *tsc)
 {
-	struct rcar_gen3_thermal_tsc *tsc = devdata;
+	int temperature, low, high;
 
-	low = clamp_val(low, -40000, 120000);
-	high = clamp_val(high, -40000, 120000);
+	rcar_gen3_thermal_get_temp(tsc, &temperature);
+
+	low = temperature - MCELSIUS(1);
+	high = temperature + MCELSIUS(1);
 
 	rcar_gen3_thermal_write(tsc, REG_GEN3_IRQTEMP1,
 				rcar_gen3_thermal_mcelsius_to_temp(tsc, low));
@@ -217,15 +217,11 @@ static int rcar_gen3_thermal_set_trips(void *devdata, int low, int high)
 	rcar_gen3_thermal_write(tsc, REG_GEN3_IRQTEMP2,
 				rcar_gen3_thermal_mcelsius_to_temp(tsc, high));
 
-	tsc->low = low;
-	tsc->high = high;
-
 	return 0;
 }
 
 static const struct thermal_zone_of_device_ops rcar_gen3_tz_of_ops = {
 	.get_temp	= rcar_gen3_thermal_get_temp,
-	.set_trips	= rcar_gen3_thermal_set_trips,
 };
 
 static void rcar_thermal_irq_set(struct rcar_gen3_thermal_priv *priv, bool on)
@@ -246,9 +242,11 @@ static irqreturn_t rcar_gen3_thermal_irq(int irq, void *data)
 	for (i = 0; i < priv->num_tscs; i++) {
 		status = rcar_gen3_thermal_read(priv->tscs[i], REG_GEN3_IRQSTR);
 		rcar_gen3_thermal_write(priv->tscs[i], REG_GEN3_IRQSTR, 0);
-		if (status)
+		if (status) {
+			rcar_gen3_thermal_update_range(priv->tscs[i]);
 			thermal_zone_device_update(priv->tscs[i]->zone,
 						   THERMAL_EVENT_UNSPECIFIED);
+		}
 	}
 
 	return IRQ_HANDLED;
@@ -325,6 +323,10 @@ static const struct of_device_id rcar_gen3_thermal_dt_ids[] = {
 		.data = &rcar_gen3_ths_tj_1_m3_w,
 	},
 	{
+		.compatible = "renesas,r8a77961-thermal",
+		.data = &rcar_gen3_ths_tj_1_m3_w,
+	},
+	{
 		.compatible = "renesas,r8a77965-thermal",
 		.data = &rcar_gen3_ths_tj_1,
 	},
@@ -446,14 +448,15 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
 			goto error_unregister;
 
 		ret = devm_add_action_or_reset(dev, rcar_gen3_hwmon_action, zone);
-		if (ret) {
+		if (ret)
 			goto error_unregister;
-		}
 
 		ret = of_thermal_get_ntrips(tsc->zone);
 		if (ret < 0)
 			goto error_unregister;
 
+		rcar_gen3_thermal_update_range(tsc);
+
 		dev_info(dev, "TSC%d: Loaded %d trip points\n", i, ret);
 	}
 
@@ -492,7 +495,7 @@ static int __maybe_unused rcar_gen3_thermal_resume(struct device *dev)
 		struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i];
 
 		priv->thermal_init(tsc);
-		rcar_gen3_thermal_set_trips(tsc, tsc->low, tsc->high);
+		rcar_gen3_thermal_update_range(tsc);
 	}
 
 	rcar_thermal_irq_set(priv, true);
diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
index 8f1aafa..e0c1f24 100644
--- a/drivers/thermal/rcar_thermal.c
+++ b/drivers/thermal/rcar_thermal.c
@@ -95,7 +95,6 @@ struct rcar_thermal_priv {
 	struct mutex lock;
 	struct list_head list;
 	int id;
-	u32 ctemp;
 };
 
 #define rcar_thermal_for_each_priv(pos, common)	\
@@ -201,7 +200,6 @@ static int rcar_thermal_update_temp(struct rcar_thermal_priv *priv)
 	struct device *dev = rcar_priv_to_dev(priv);
 	int i;
 	u32 ctemp, old, new;
-	int ret = -EINVAL;
 
 	mutex_lock(&priv->lock);
 
@@ -247,37 +245,29 @@ static int rcar_thermal_update_temp(struct rcar_thermal_priv *priv)
 						   ((ctemp - 1) << 0)));
 	}
 
-	dev_dbg(dev, "thermal%d  %d -> %d\n", priv->id, priv->ctemp, ctemp);
-
-	priv->ctemp = ctemp;
-	ret = 0;
 err_out_unlock:
 	mutex_unlock(&priv->lock);
-	return ret;
+
+	return ctemp ? ctemp : -EINVAL;
 }
 
 static int rcar_thermal_get_current_temp(struct rcar_thermal_priv *priv,
 					 int *temp)
 {
-	int tmp;
-	int ret;
+	int ctemp;
 
-	ret = rcar_thermal_update_temp(priv);
-	if (ret < 0)
-		return ret;
-
-	mutex_lock(&priv->lock);
-	if (priv->chip->ctemp_bands == 1)
-		tmp = MCELSIUS((priv->ctemp * 5) - 65);
-	else if (priv->ctemp < 24)
-		tmp = MCELSIUS(((priv->ctemp * 55) - 720) / 10);
-	else
-		tmp = MCELSIUS((priv->ctemp * 5) - 60);
-	mutex_unlock(&priv->lock);
+	ctemp = rcar_thermal_update_temp(priv);
+	if (ctemp < 0)
+		return ctemp;
 
 	/* Guaranteed operating range is -45C to 125C. */
 
-	*temp = tmp;
+	if (priv->chip->ctemp_bands == 1)
+		*temp = MCELSIUS((ctemp * 5) - 65);
+	else if (ctemp < 24)
+		*temp = MCELSIUS(((ctemp * 55) - 720) / 10);
+	else
+		*temp = MCELSIUS((ctemp * 5) - 60);
 
 	return 0;
 }
@@ -387,28 +377,17 @@ static void _rcar_thermal_irq_ctrl(struct rcar_thermal_priv *priv, int enable)
 static void rcar_thermal_work(struct work_struct *work)
 {
 	struct rcar_thermal_priv *priv;
-	int cctemp, nctemp;
 	int ret;
 
 	priv = container_of(work, struct rcar_thermal_priv, work.work);
 
-	ret = rcar_thermal_get_current_temp(priv, &cctemp);
-	if (ret < 0)
-		return;
-
 	ret = rcar_thermal_update_temp(priv);
 	if (ret < 0)
 		return;
 
 	rcar_thermal_irq_enable(priv);
 
-	ret = rcar_thermal_get_current_temp(priv, &nctemp);
-	if (ret < 0)
-		return;
-
-	if (nctemp != cctemp)
-		thermal_zone_device_update(priv->zone,
-					   THERMAL_EVENT_UNSPECIFIED);
+	thermal_zone_device_update(priv->zone, THERMAL_EVENT_UNSPECIFIED);
 }
 
 static u32 rcar_thermal_had_changed(struct rcar_thermal_priv *priv, u32 status)
@@ -521,8 +500,10 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 			res = platform_get_resource(pdev, IORESOURCE_MEM,
 						    mres++);
 			common->base = devm_ioremap_resource(dev, res);
-			if (IS_ERR(common->base))
-				return PTR_ERR(common->base);
+			if (IS_ERR(common->base)) {
+				ret = PTR_ERR(common->base);
+				goto error_unregister;
+			}
 
 			idle = 0; /* polling delay is not needed */
 		}
diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index fd4a1781..e9a90bc 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -1094,7 +1094,9 @@ static int exynos_tmu_probe(struct platform_device *pdev)
 						    &exynos_sensor_ops);
 	if (IS_ERR(data->tzd)) {
 		ret = PTR_ERR(data->tzd);
-		dev_err(&pdev->dev, "Failed to register sensor: %d\n", ret);
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Failed to register sensor: %d\n",
+				ret);
 		goto err_sclk;
 	}
 
diff --git a/drivers/thermal/sprd_thermal.c b/drivers/thermal/sprd_thermal.c
new file mode 100644
index 0000000..a340374
--- /dev/null
+++ b/drivers/thermal/sprd_thermal.c
@@ -0,0 +1,552 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2020 Spreadtrum Communications Inc.
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/thermal.h>
+
+#define SPRD_THM_CTL			0x0
+#define SPRD_THM_INT_EN			0x4
+#define SPRD_THM_INT_STS		0x8
+#define SPRD_THM_INT_RAW_STS		0xc
+#define SPRD_THM_DET_PERIOD		0x10
+#define SPRD_THM_INT_CLR		0x14
+#define SPRD_THM_INT_CLR_ST		0x18
+#define SPRD_THM_MON_PERIOD		0x4c
+#define SPRD_THM_MON_CTL		0x50
+#define SPRD_THM_INTERNAL_STS1		0x54
+#define SPRD_THM_RAW_READ_MSK		0x3ff
+
+#define SPRD_THM_OFFSET(id)		((id) * 0x4)
+#define SPRD_THM_TEMP(id)		(SPRD_THM_OFFSET(id) + 0x5c)
+#define SPRD_THM_THRES(id)		(SPRD_THM_OFFSET(id) + 0x2c)
+
+#define SPRD_THM_SEN(id)		BIT((id) + 2)
+#define SPRD_THM_SEN_OVERHEAT_EN(id)	BIT((id) + 8)
+#define SPRD_THM_SEN_OVERHEAT_ALARM_EN(id)	BIT((id) + 0)
+
+/* bits definitions for register THM_CTL */
+#define SPRD_THM_SET_RDY_ST		BIT(13)
+#define SPRD_THM_SET_RDY		BIT(12)
+#define SPRD_THM_MON_EN			BIT(1)
+#define SPRD_THM_EN			BIT(0)
+
+/* bits definitions for register THM_INT_CTL */
+#define SPRD_THM_BIT_INT_EN		BIT(26)
+#define SPRD_THM_OVERHEAT_EN		BIT(25)
+#define SPRD_THM_OTP_TRIP_SHIFT		10
+
+/* bits definitions for register SPRD_THM_INTERNAL_STS1 */
+#define SPRD_THM_TEMPER_RDY		BIT(0)
+
+#define SPRD_THM_DET_PERIOD_DATA	0x800
+#define SPRD_THM_DET_PERIOD_MASK	GENMASK(19, 0)
+#define SPRD_THM_MON_MODE		0x7
+#define SPRD_THM_MON_MODE_MASK		GENMASK(3, 0)
+#define SPRD_THM_MON_PERIOD_DATA	0x10
+#define SPRD_THM_MON_PERIOD_MASK	GENMASK(15, 0)
+#define SPRD_THM_THRES_MASK		GENMASK(19, 0)
+#define SPRD_THM_INT_CLR_MASK		GENMASK(24, 0)
+
+/* thermal sensor calibration parameters */
+#define SPRD_THM_TEMP_LOW		-40000
+#define SPRD_THM_TEMP_HIGH		120000
+#define SPRD_THM_OTP_TEMP		120000
+#define SPRD_THM_HOT_TEMP		75000
+#define SPRD_THM_RAW_DATA_LOW		0
+#define SPRD_THM_RAW_DATA_HIGH		1000
+#define SPRD_THM_SEN_NUM		8
+#define SPRD_THM_DT_OFFSET		24
+#define SPRD_THM_RATION_OFFSET		17
+#define SPRD_THM_RATION_SIGN		16
+
+#define SPRD_THM_RDYST_POLLING_TIME	10
+#define SPRD_THM_RDYST_TIMEOUT		700
+#define SPRD_THM_TEMP_READY_POLL_TIME	10000
+#define SPRD_THM_TEMP_READY_TIMEOUT	600000
+#define SPRD_THM_MAX_SENSOR		8
+
+struct sprd_thermal_sensor {
+	struct thermal_zone_device *tzd;
+	struct sprd_thermal_data *data;
+	struct device *dev;
+	int cal_slope;
+	int cal_offset;
+	int id;
+};
+
+struct sprd_thermal_data {
+	const struct sprd_thm_variant_data *var_data;
+	struct sprd_thermal_sensor *sensor[SPRD_THM_MAX_SENSOR];
+	struct clk *clk;
+	void __iomem *base;
+	u32 ratio_off;
+	int ratio_sign;
+	int nr_sensors;
+};
+
+/*
+ * The conversion between ADC and temperature is based on linear relationship,
+ * and use idea_k to specify the slope and ideal_b to specify the offset.
+ *
+ * Since different Spreadtrum SoCs have different ideal_k and ideal_b,
+ * we should save ideal_k and ideal_b in the device data structure.
+ */
+struct sprd_thm_variant_data {
+	u32 ideal_k;
+	u32 ideal_b;
+};
+
+static const struct sprd_thm_variant_data ums512_data = {
+	.ideal_k = 262,
+	.ideal_b = 66400,
+};
+
+static inline void sprd_thm_update_bits(void __iomem *reg, u32 mask, u32 val)
+{
+	u32 tmp, orig;
+
+	orig = readl(reg);
+	tmp = orig & ~mask;
+	tmp |= val & mask;
+	writel(tmp, reg);
+}
+
+static int sprd_thm_cal_read(struct device_node *np, const char *cell_id,
+			     u32 *val)
+{
+	struct nvmem_cell *cell;
+	void *buf;
+	size_t len;
+
+	cell = of_nvmem_cell_get(np, cell_id);
+	if (IS_ERR(cell))
+		return PTR_ERR(cell);
+
+	buf = nvmem_cell_read(cell, &len);
+	nvmem_cell_put(cell);
+	if (IS_ERR(buf))
+		return PTR_ERR(buf);
+
+	if (len > sizeof(u32)) {
+		kfree(buf);
+		return -EINVAL;
+	}
+
+	memcpy(val, buf, len);
+
+	kfree(buf);
+	return 0;
+}
+
+static int sprd_thm_sensor_calibration(struct device_node *np,
+				       struct sprd_thermal_data *thm,
+				       struct sprd_thermal_sensor *sen)
+{
+	int ret;
+	/*
+	 * According to thermal datasheet, the default calibration offset is 64,
+	 * and the default ratio is 1000.
+	 */
+	int dt_offset = 64, ratio = 1000;
+
+	ret = sprd_thm_cal_read(np, "sen_delta_cal", &dt_offset);
+	if (ret)
+		return ret;
+
+	ratio += thm->ratio_sign * thm->ratio_off;
+
+	/*
+	 * According to the ideal slope K and ideal offset B, combined with
+	 * calibration value of thermal from efuse, then calibrate the real
+	 * slope k and offset b:
+	 * k_cal = (k * ratio) / 1000.
+	 * b_cal = b + (dt_offset - 64) * 500.
+	 */
+	sen->cal_slope = (thm->var_data->ideal_k * ratio) / 1000;
+	sen->cal_offset = thm->var_data->ideal_b + (dt_offset - 128) * 250;
+
+	return 0;
+}
+
+static int sprd_thm_rawdata_to_temp(struct sprd_thermal_sensor *sen,
+				    u32 rawdata)
+{
+	clamp(rawdata, (u32)SPRD_THM_RAW_DATA_LOW, (u32)SPRD_THM_RAW_DATA_HIGH);
+
+	/*
+	 * According to the thermal datasheet, the formula of converting
+	 * adc value to the temperature value should be:
+	 * T_final = k_cal * x - b_cal.
+	 */
+	return sen->cal_slope * rawdata - sen->cal_offset;
+}
+
+static int sprd_thm_temp_to_rawdata(int temp, struct sprd_thermal_sensor *sen)
+{
+	u32 val;
+
+	clamp(temp, (int)SPRD_THM_TEMP_LOW, (int)SPRD_THM_TEMP_HIGH);
+
+	/*
+	 * According to the thermal datasheet, the formula of converting
+	 * adc value to the temperature value should be:
+	 * T_final = k_cal * x - b_cal.
+	 */
+	val = (temp + sen->cal_offset) / sen->cal_slope;
+
+	return clamp(val, val, (u32)(SPRD_THM_RAW_DATA_HIGH - 1));
+}
+
+static int sprd_thm_read_temp(void *devdata, int *temp)
+{
+	struct sprd_thermal_sensor *sen = devdata;
+	u32 data;
+
+	data = readl(sen->data->base + SPRD_THM_TEMP(sen->id)) &
+		SPRD_THM_RAW_READ_MSK;
+
+	*temp = sprd_thm_rawdata_to_temp(sen, data);
+
+	return 0;
+}
+
+static const struct thermal_zone_of_device_ops sprd_thm_ops = {
+	.get_temp = sprd_thm_read_temp,
+};
+
+static int sprd_thm_poll_ready_status(struct sprd_thermal_data *thm)
+{
+	u32 val;
+	int ret;
+
+	/*
+	 * Wait for thermal ready status before configuring thermal parameters.
+	 */
+	ret = readl_poll_timeout(thm->base + SPRD_THM_CTL, val,
+				 !(val & SPRD_THM_SET_RDY_ST),
+				 SPRD_THM_RDYST_POLLING_TIME,
+				 SPRD_THM_RDYST_TIMEOUT);
+	if (ret)
+		return ret;
+
+	sprd_thm_update_bits(thm->base + SPRD_THM_CTL, SPRD_THM_MON_EN,
+			     SPRD_THM_MON_EN);
+	sprd_thm_update_bits(thm->base + SPRD_THM_CTL, SPRD_THM_SET_RDY,
+			     SPRD_THM_SET_RDY);
+	return 0;
+}
+
+static int sprd_thm_wait_temp_ready(struct sprd_thermal_data *thm)
+{
+	u32 val;
+
+	/* Wait for first temperature data ready before reading temperature */
+	return readl_poll_timeout(thm->base + SPRD_THM_INTERNAL_STS1, val,
+				  !(val & SPRD_THM_TEMPER_RDY),
+				  SPRD_THM_TEMP_READY_POLL_TIME,
+				  SPRD_THM_TEMP_READY_TIMEOUT);
+}
+
+static int sprd_thm_set_ready(struct sprd_thermal_data *thm)
+{
+	int ret;
+
+	ret = sprd_thm_poll_ready_status(thm);
+	if (ret)
+		return ret;
+
+	/*
+	 * Clear interrupt status, enable thermal interrupt and enable thermal.
+	 *
+	 * The SPRD thermal controller integrates a hardware interrupt signal,
+	 * which means if the temperature is overheat, it will generate an
+	 * interrupt and notify the event to PMIC automatically to shutdown the
+	 * system. So here we should enable the interrupt bits, though we have
+	 * not registered an irq handler.
+	 */
+	writel(SPRD_THM_INT_CLR_MASK, thm->base + SPRD_THM_INT_CLR);
+	sprd_thm_update_bits(thm->base + SPRD_THM_INT_EN,
+			     SPRD_THM_BIT_INT_EN, SPRD_THM_BIT_INT_EN);
+	sprd_thm_update_bits(thm->base + SPRD_THM_CTL,
+			     SPRD_THM_EN, SPRD_THM_EN);
+	return 0;
+}
+
+static void sprd_thm_sensor_init(struct sprd_thermal_data *thm,
+				 struct sprd_thermal_sensor *sen)
+{
+	u32 otp_rawdata, hot_rawdata;
+
+	otp_rawdata = sprd_thm_temp_to_rawdata(SPRD_THM_OTP_TEMP, sen);
+	hot_rawdata = sprd_thm_temp_to_rawdata(SPRD_THM_HOT_TEMP, sen);
+
+	/* Enable the sensor' overheat temperature protection interrupt */
+	sprd_thm_update_bits(thm->base + SPRD_THM_INT_EN,
+			     SPRD_THM_SEN_OVERHEAT_ALARM_EN(sen->id),
+			     SPRD_THM_SEN_OVERHEAT_ALARM_EN(sen->id));
+
+	/* Set the sensor' overheat and hot threshold temperature */
+	sprd_thm_update_bits(thm->base + SPRD_THM_THRES(sen->id),
+			     SPRD_THM_THRES_MASK,
+			     (otp_rawdata << SPRD_THM_OTP_TRIP_SHIFT) |
+			     hot_rawdata);
+
+	/* Enable the corresponding sensor */
+	sprd_thm_update_bits(thm->base + SPRD_THM_CTL, SPRD_THM_SEN(sen->id),
+			     SPRD_THM_SEN(sen->id));
+}
+
+static void sprd_thm_para_config(struct sprd_thermal_data *thm)
+{
+	/* Set the period of two valid temperature detection action */
+	sprd_thm_update_bits(thm->base + SPRD_THM_DET_PERIOD,
+			     SPRD_THM_DET_PERIOD_MASK, SPRD_THM_DET_PERIOD);
+
+	/* Set the sensors' monitor mode */
+	sprd_thm_update_bits(thm->base + SPRD_THM_MON_CTL,
+			     SPRD_THM_MON_MODE_MASK, SPRD_THM_MON_MODE);
+
+	/* Set the sensors' monitor period */
+	sprd_thm_update_bits(thm->base + SPRD_THM_MON_PERIOD,
+			     SPRD_THM_MON_PERIOD_MASK, SPRD_THM_MON_PERIOD);
+}
+
+static void sprd_thm_toggle_sensor(struct sprd_thermal_sensor *sen, bool on)
+{
+	struct thermal_zone_device *tzd = sen->tzd;
+
+	tzd->ops->set_mode(tzd,
+		on ? THERMAL_DEVICE_ENABLED : THERMAL_DEVICE_DISABLED);
+}
+
+static int sprd_thm_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct device_node *sen_child;
+	struct sprd_thermal_data *thm;
+	struct sprd_thermal_sensor *sen;
+	const struct sprd_thm_variant_data *pdata;
+	int ret, i;
+	u32 val;
+
+	pdata = of_device_get_match_data(&pdev->dev);
+	if (!pdata) {
+		dev_err(&pdev->dev, "No matching driver data found\n");
+		return -EINVAL;
+	}
+
+	thm = devm_kzalloc(&pdev->dev, sizeof(*thm), GFP_KERNEL);
+	if (!thm)
+		return -ENOMEM;
+
+	thm->var_data = pdata;
+	thm->base = devm_platform_ioremap_resource(pdev, 0);
+	if (!thm->base)
+		return -ENOMEM;
+
+	thm->nr_sensors = of_get_child_count(np);
+	if (thm->nr_sensors == 0 || thm->nr_sensors > SPRD_THM_MAX_SENSOR) {
+		dev_err(&pdev->dev, "incorrect sensor count\n");
+		return -EINVAL;
+	}
+
+	thm->clk = devm_clk_get(&pdev->dev, "enable");
+	if (IS_ERR(thm->clk)) {
+		dev_err(&pdev->dev, "failed to get enable clock\n");
+		return PTR_ERR(thm->clk);
+	}
+
+	ret = clk_prepare_enable(thm->clk);
+	if (ret)
+		return ret;
+
+	sprd_thm_para_config(thm);
+
+	ret = sprd_thm_cal_read(np, "thm_sign_cal", &val);
+	if (ret)
+		goto disable_clk;
+
+	if (val > 0)
+		thm->ratio_sign = -1;
+	else
+		thm->ratio_sign = 1;
+
+	ret = sprd_thm_cal_read(np, "thm_ratio_cal", &thm->ratio_off);
+	if (ret)
+		goto disable_clk;
+
+	for_each_child_of_node(np, sen_child) {
+		sen = devm_kzalloc(&pdev->dev, sizeof(*sen), GFP_KERNEL);
+		if (!sen) {
+			ret = -ENOMEM;
+			goto disable_clk;
+		}
+
+		sen->data = thm;
+		sen->dev = &pdev->dev;
+
+		ret = of_property_read_u32(sen_child, "reg", &sen->id);
+		if (ret) {
+			dev_err(&pdev->dev, "get sensor reg failed");
+			goto disable_clk;
+		}
+
+		ret = sprd_thm_sensor_calibration(sen_child, thm, sen);
+		if (ret) {
+			dev_err(&pdev->dev, "efuse cal analysis failed");
+			goto disable_clk;
+		}
+
+		sprd_thm_sensor_init(thm, sen);
+
+		sen->tzd = devm_thermal_zone_of_sensor_register(sen->dev,
+								sen->id,
+								sen,
+								&sprd_thm_ops);
+		if (IS_ERR(sen->tzd)) {
+			dev_err(&pdev->dev, "register thermal zone failed %d\n",
+				sen->id);
+			ret = PTR_ERR(sen->tzd);
+			goto disable_clk;
+		}
+
+		thm->sensor[sen->id] = sen;
+	}
+
+	ret = sprd_thm_set_ready(thm);
+	if (ret)
+		goto disable_clk;
+
+	ret = sprd_thm_wait_temp_ready(thm);
+	if (ret)
+		goto disable_clk;
+
+	for (i = 0; i < thm->nr_sensors; i++)
+		sprd_thm_toggle_sensor(thm->sensor[i], true);
+
+	platform_set_drvdata(pdev, thm);
+	return 0;
+
+disable_clk:
+	clk_disable_unprepare(thm->clk);
+	return ret;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static void sprd_thm_hw_suspend(struct sprd_thermal_data *thm)
+{
+	int i;
+
+	for (i = 0; i < thm->nr_sensors; i++) {
+		sprd_thm_update_bits(thm->base + SPRD_THM_CTL,
+				     SPRD_THM_SEN(thm->sensor[i]->id), 0);
+	}
+
+	sprd_thm_update_bits(thm->base + SPRD_THM_CTL,
+			     SPRD_THM_EN, 0x0);
+}
+
+static int sprd_thm_suspend(struct device *dev)
+{
+	struct sprd_thermal_data *thm = dev_get_drvdata(dev);
+	int i;
+
+	for (i = 0; i < thm->nr_sensors; i++)
+		sprd_thm_toggle_sensor(thm->sensor[i], false);
+
+	sprd_thm_hw_suspend(thm);
+	clk_disable_unprepare(thm->clk);
+
+	return 0;
+}
+
+static int sprd_thm_hw_resume(struct sprd_thermal_data *thm)
+{
+	int ret, i;
+
+	for (i = 0; i < thm->nr_sensors; i++) {
+		sprd_thm_update_bits(thm->base + SPRD_THM_CTL,
+				     SPRD_THM_SEN(thm->sensor[i]->id),
+				     SPRD_THM_SEN(thm->sensor[i]->id));
+	}
+
+	ret = sprd_thm_poll_ready_status(thm);
+	if (ret)
+		return ret;
+
+	writel(SPRD_THM_INT_CLR_MASK, thm->base + SPRD_THM_INT_CLR);
+	sprd_thm_update_bits(thm->base + SPRD_THM_CTL,
+			     SPRD_THM_EN, SPRD_THM_EN);
+	return sprd_thm_wait_temp_ready(thm);
+}
+
+static int sprd_thm_resume(struct device *dev)
+{
+	struct sprd_thermal_data *thm = dev_get_drvdata(dev);
+	int ret, i;
+
+	ret = clk_prepare_enable(thm->clk);
+	if (ret)
+		return ret;
+
+	ret = sprd_thm_hw_resume(thm);
+	if (ret)
+		goto disable_clk;
+
+	for (i = 0; i < thm->nr_sensors; i++)
+		sprd_thm_toggle_sensor(thm->sensor[i], true);
+
+	return 0;
+
+disable_clk:
+	clk_disable_unprepare(thm->clk);
+	return ret;
+}
+#endif
+
+static int sprd_thm_remove(struct platform_device *pdev)
+{
+	struct sprd_thermal_data *thm = platform_get_drvdata(pdev);
+	int i;
+
+	for (i = 0; i < thm->nr_sensors; i++) {
+		sprd_thm_toggle_sensor(thm->sensor[i], false);
+		devm_thermal_zone_of_sensor_unregister(&pdev->dev,
+						       thm->sensor[i]->tzd);
+	}
+
+	clk_disable_unprepare(thm->clk);
+	return 0;
+}
+
+static const struct of_device_id sprd_thermal_of_match[] = {
+	{ .compatible = "sprd,ums512-thermal", .data = &ums512_data },
+	{ },
+};
+
+static const struct dev_pm_ops sprd_thermal_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(sprd_thm_suspend, sprd_thm_resume)
+};
+
+static struct platform_driver sprd_thermal_driver = {
+	.probe = sprd_thm_probe,
+	.remove = sprd_thm_remove,
+	.driver = {
+		.name = "sprd-thermal",
+		.pm = &sprd_thermal_pm_ops,
+		.of_match_table = sprd_thermal_of_match,
+	},
+};
+
+module_platform_driver(sprd_thermal_driver);
+
+MODULE_AUTHOR("Freeman Liu <freeman.liu@unisoc.com>");
+MODULE_DESCRIPTION("Spreadtrum thermal driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/st/stm_thermal.c b/drivers/thermal/st/stm_thermal.c
index ad9e3bf..9314e3d 100644
--- a/drivers/thermal/st/stm_thermal.c
+++ b/drivers/thermal/st/stm_thermal.c
@@ -478,7 +478,8 @@ static int stm_thermal_resume(struct device *dev)
 }
 #endif /* CONFIG_PM_SLEEP */
 
-SIMPLE_DEV_PM_OPS(stm_thermal_pm_ops, stm_thermal_suspend, stm_thermal_resume);
+static SIMPLE_DEV_PM_OPS(stm_thermal_pm_ops,
+			 stm_thermal_suspend, stm_thermal_resume);
 
 static const struct thermal_zone_of_device_ops stm_tz_ops = {
 	.get_temp	= stm_thermal_get_temp,
diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
index 2fa78f7..263b042 100644
--- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
@@ -15,7 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 #include <linux/clk.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/platform_device.h>
 #include <linux/err.h>
 #include <linux/types.h>
@@ -24,7 +24,6 @@
 #include <linux/of_device.h>
 #include <linux/of_platform.h>
 #include <linux/of_irq.h>
-#include <linux/of_gpio.h>
 #include <linux/io.h>
 
 #include "ti-bandgap.h"
@@ -743,27 +742,13 @@ int ti_bandgap_get_trend(struct ti_bandgap *bgp, int id, int *trend)
 static int ti_bandgap_tshut_init(struct ti_bandgap *bgp,
 				 struct platform_device *pdev)
 {
-	int gpio_nr = bgp->tshut_gpio;
 	int status;
 
-	/* Request for gpio_86 line */
-	status = gpio_request(gpio_nr, "tshut");
-	if (status < 0) {
-		dev_err(bgp->dev, "Could not request for TSHUT GPIO:%i\n", 86);
-		return status;
-	}
-	status = gpio_direction_input(gpio_nr);
-	if (status) {
-		dev_err(bgp->dev, "Cannot set input TSHUT GPIO %d\n", gpio_nr);
-		return status;
-	}
-
-	status = request_irq(gpio_to_irq(gpio_nr), ti_bandgap_tshut_irq_handler,
+	status = request_irq(gpiod_to_irq(bgp->tshut_gpiod),
+			     ti_bandgap_tshut_irq_handler,
 			     IRQF_TRIGGER_RISING, "tshut", NULL);
-	if (status) {
-		gpio_free(gpio_nr);
+	if (status)
 		dev_err(bgp->dev, "request irq failed for TSHUT");
-	}
 
 	return 0;
 }
@@ -860,11 +845,10 @@ static struct ti_bandgap *ti_bandgap_build(struct platform_device *pdev)
 	} while (res);
 
 	if (TI_BANDGAP_HAS(bgp, TSHUT)) {
-		bgp->tshut_gpio = of_get_gpio(node, 0);
-		if (!gpio_is_valid(bgp->tshut_gpio)) {
-			dev_err(&pdev->dev, "invalid gpio for tshut (%d)\n",
-				bgp->tshut_gpio);
-			return ERR_PTR(-EINVAL);
+		bgp->tshut_gpiod = devm_gpiod_get(&pdev->dev, NULL, GPIOD_IN);
+		if (IS_ERR(bgp->tshut_gpiod)) {
+			dev_err(&pdev->dev, "invalid gpio for tshut\n");
+			return ERR_CAST(bgp->tshut_gpiod);
 		}
 	}
 
@@ -1046,10 +1030,8 @@ int ti_bandgap_probe(struct platform_device *pdev)
 put_fclock:
 	clk_put(bgp->fclock);
 free_irqs:
-	if (TI_BANDGAP_HAS(bgp, TSHUT)) {
-		free_irq(gpio_to_irq(bgp->tshut_gpio), NULL);
-		gpio_free(bgp->tshut_gpio);
-	}
+	if (TI_BANDGAP_HAS(bgp, TSHUT))
+		free_irq(gpiod_to_irq(bgp->tshut_gpiod), NULL);
 
 	return ret;
 }
@@ -1079,10 +1061,8 @@ int ti_bandgap_remove(struct platform_device *pdev)
 	if (TI_BANDGAP_HAS(bgp, TALERT))
 		free_irq(bgp->irq, bgp);
 
-	if (TI_BANDGAP_HAS(bgp, TSHUT)) {
-		free_irq(gpio_to_irq(bgp->tshut_gpio), NULL);
-		gpio_free(bgp->tshut_gpio);
-	}
+	if (TI_BANDGAP_HAS(bgp, TSHUT))
+		free_irq(gpiod_to_irq(bgp->tshut_gpiod), NULL);
 
 	return 0;
 }
diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.h b/drivers/thermal/ti-soc-thermal/ti-bandgap.h
index bb9b0f7..fce4657 100644
--- a/drivers/thermal/ti-soc-thermal/ti-bandgap.h
+++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.h
@@ -13,6 +13,8 @@
 #include <linux/types.h>
 #include <linux/err.h>
 
+struct gpio_desc;
+
 /**
  * DOC: bandgap driver data structure
  * ==================================
@@ -199,7 +201,7 @@ struct ti_bandgap {
 	struct clk			*div_clk;
 	spinlock_t			lock; /* shields this struct */
 	int				irq;
-	int				tshut_gpio;
+	struct gpio_desc		*tshut_gpiod;
 	u32				clk_rate;
 };
 
diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig
index a312cb3..2dff93d 100644
--- a/drivers/tty/Kconfig
+++ b/drivers/tty/Kconfig
@@ -137,7 +137,6 @@
 	  security.  This option enables these legacy devices; on most
 	  systems, it is safe to say N.
 
-
 config LEGACY_PTY_COUNT
 	int "Maximum number of legacy PTY in use"
 	depends on LEGACY_PTYS
@@ -151,6 +150,31 @@
 	  When not in use, each legacy PTY occupies 12 bytes on 32-bit
 	  architectures and 24 bytes on 64-bit architectures.
 
+config LDISC_AUTOLOAD
+	bool "Automatically load TTY Line Disciplines"
+	default y
+	help
+	  Historically the kernel has always automatically loaded any
+	  line discipline that is in a kernel module when a user asks
+	  for it to be loaded with the TIOCSETD ioctl, or through other
+	  means.  This is not always the best thing to do on systems
+	  where you know you will not be using some of the more
+	  "ancient" line disciplines, so prevent the kernel from doing
+	  this unless the request is coming from a process with the
+	  CAP_SYS_MODULE permissions.
+
+	  Say 'Y' here if you trust your userspace users to do the right
+	  thing, or if you have only provided the line disciplines that
+	  you know you will be using, or if you wish to continue to use
+	  the traditional method of on-demand loading of these modules
+	  by any user.
+
+	  This functionality can be changed at runtime with the
+	  dev.tty.ldisc_autoload sysctl, this configuration option will
+	  only set the default value of this functionality.
+
+source "drivers/tty/serial/Kconfig"
+
 config SERIAL_NONSTANDARD
 	bool "Non-standard serial port support"
 	depends on HAS_IOMEM
@@ -270,16 +294,6 @@
 	  synchronous and asynchronous serial adapters
 	  manufactured by Microgate Systems, Ltd. (www.microgate.com)
 
-config NOZOMI
-	tristate "HSDPA Broadband Wireless Data Card - Globe Trotter"
-	depends on PCI
-	help
-	  If you have a HSDPA driver Broadband Wireless Data Card -
-	  Globe Trotter PCMCIA card, say Y here.
-
-	  To compile this driver as a module, choose M here, the module
-	  will be called nozomi.
-
 config ISI
 	tristate "Multi-Tech multiport card support"
 	depends on SERIAL_NONSTANDARD && PCI
@@ -302,43 +316,6 @@
 	  The module will be called n_hdlc. If you want to do that, say M
 	  here.
 
-config N_GSM
-	tristate "GSM MUX line discipline support (EXPERIMENTAL)"
-	depends on NET
-	help
-	  This line discipline provides support for the GSM MUX protocol and
-	  presents the mux as a set of 61 individual tty devices.
-
-config TRACE_ROUTER
-	tristate "Trace data router for MIPI P1149.7 cJTAG standard"
-	depends on TRACE_SINK
-	help
-	  The trace router uses the Linux tty line discipline framework to
-	  route trace data coming from a tty port (say UART for example) to
-	  the trace sink line discipline driver and to another tty port (say
-	  USB). This is part of a solution for the MIPI P1149.7, compact JTAG,
-	  standard, which is for debugging mobile devices. The PTI driver in
-	  drivers/misc/pti.c defines the majority of this MIPI solution.
-
-	  You should select this driver if the target kernel is meant for
-	  a mobile device containing a modem.  Then you will need to select
-	  "Trace data sink for MIPI P1149.7 cJTAG standard" line discipline
-	  driver.
-
-config TRACE_SINK
-	tristate "Trace data sink for MIPI P1149.7 cJTAG standard"
-	help
-	  The trace sink uses the Linux line discipline framework to receive
-	  trace data coming from the trace router line discipline driver
-	  to a user-defined tty port target, like USB.
-	  This is to provide a way to extract modem trace data on
-	  devices that do not have a PTI HW module, or just need modem
-	  trace data to come out of a different HW output port.
-	  This is part of a solution for the P1149.7, compact JTAG, standard.
-
-	  If you select this option, you need to select
-	  "Trace data router for MIPI P1149.7 cJTAG standard".
-
 config PPC_EPAPR_HV_BYTECHAN
 	bool "ePAPR hypervisor byte channel driver"
 	depends on PPC
@@ -374,20 +351,6 @@
 	  there simply will be no early console output.  This is true also
 	  if you don't boot under a hypervisor at all.
 
-config NULL_TTY
-	tristate "NULL TTY driver"
-	help
-	  Say Y here if you want a NULL TTY which simply discards messages.
-
-	  This is useful to allow userspace applications which expect a console
-	  device to work without modifications even when no console is
-	  available or desired.
-
-	  In order to use this driver, you should redirect the console to this
-	  TTY, or boot the kernel with console=ttynull.
-
-	  If unsure, say N.
-
 config GOLDFISH_TTY
 	tristate "Goldfish TTY Driver"
 	depends on GOLDFISH
@@ -401,6 +364,23 @@
 	default y if GOLDFISH_TTY=y
 	select SERIAL_EARLYCON
 
+config N_GSM
+	tristate "GSM MUX line discipline support (EXPERIMENTAL)"
+	depends on NET
+	help
+	  This line discipline provides support for the GSM MUX protocol and
+	  presents the mux as a set of 61 individual tty devices.
+
+config NOZOMI
+	tristate "HSDPA Broadband Wireless Data Card - Globe Trotter"
+	depends on PCI
+	help
+	  If you have a HSDPA driver Broadband Wireless Data Card -
+	  Globe Trotter PCMCIA card, say Y here.
+
+	  To compile this driver as a module, choose M here, the module
+	  will be called nozomi.
+
 config MIPS_EJTAG_FDC_TTY
 	bool "MIPS EJTAG Fast Debug Channel TTY"
 	depends on MIPS_CDMM
@@ -448,33 +428,58 @@
 	help
 	  FDC channel number to use for KGDB.
 
+config NULL_TTY
+	tristate "NULL TTY driver"
+	help
+	  Say Y here if you want a NULL TTY which simply discards messages.
+
+	  This is useful to allow userspace applications which expect a console
+	  device to work without modifications even when no console is
+	  available or desired.
+
+	  In order to use this driver, you should redirect the console to this
+	  TTY, or boot the kernel with console=ttynull.
+
+	  If unsure, say N.
+
+config TRACE_ROUTER
+	tristate "Trace data router for MIPI P1149.7 cJTAG standard"
+	depends on TRACE_SINK
+	help
+	  The trace router uses the Linux tty line discipline framework to
+	  route trace data coming from a tty port (say UART for example) to
+	  the trace sink line discipline driver and to another tty port (say
+	  USB). This is part of a solution for the MIPI P1149.7, compact JTAG,
+	  standard, which is for debugging mobile devices. The PTI driver in
+	  drivers/misc/pti.c defines the majority of this MIPI solution.
+
+	  You should select this driver if the target kernel is meant for
+	  a mobile device containing a modem.  Then you will need to select
+	  "Trace data sink for MIPI P1149.7 cJTAG standard" line discipline
+	  driver.
+
+config TRACE_SINK
+	tristate "Trace data sink for MIPI P1149.7 cJTAG standard"
+	help
+	  The trace sink uses the Linux line discipline framework to receive
+	  trace data coming from the trace router line discipline driver
+	  to a user-defined tty port target, like USB.
+	  This is to provide a way to extract modem trace data on
+	  devices that do not have a PTI HW module, or just need modem
+	  trace data to come out of a different HW output port.
+	  This is part of a solution for the P1149.7, compact JTAG, standard.
+
+	  If you select this option, you need to select
+	  "Trace data router for MIPI P1149.7 cJTAG standard".
+
 config VCC
 	tristate "Sun Virtual Console Concentrator"
 	depends on SUN_LDOMS
 	help
 	  Support for Sun logical domain consoles.
 
-config LDISC_AUTOLOAD
-	bool "Automatically load TTY Line Disciplines"
-	default y
-	help
-	  Historically the kernel has always automatically loaded any
-	  line discipline that is in a kernel module when a user asks
-	  for it to be loaded with the TIOCSETD ioctl, or through other
-	  means.  This is not always the best thing to do on systems
-	  where you know you will not be using some of the more
-	  "ancient" line disciplines, so prevent the kernel from doing
-	  this unless the request is coming from a process with the
-	  CAP_SYS_MODULE permissions.
-
-	  Say 'Y' here if you trust your userspace users to do the right
-	  thing, or if you have only provided the line disciplines that
-	  you know you will be using, or if you wish to continue to use
-	  the traditional method of on-demand loading of these modules
-	  by any user.
-
-	  This functionality can be changed at runtime with the
-	  dev.tty.ldisc_autoload sysctl, this configuration option will
-	  only set the default value of this functionality.
+source "drivers/tty/hvc/Kconfig"
 
 endif # TTY
+
+source "drivers/tty/serdev/Kconfig"
diff --git a/drivers/tty/ehv_bytechan.c b/drivers/tty/ehv_bytechan.c
index 769e0a5d..3c6dd06 100644
--- a/drivers/tty/ehv_bytechan.c
+++ b/drivers/tty/ehv_bytechan.c
@@ -136,6 +136,21 @@ static int find_console_handle(void)
 	return 1;
 }
 
+static unsigned int local_ev_byte_channel_send(unsigned int handle,
+					       unsigned int *count,
+					       const char *p)
+{
+	char buffer[EV_BYTE_CHANNEL_MAX_BYTES];
+	unsigned int c = *count;
+
+	if (c < sizeof(buffer)) {
+		memcpy(buffer, p, c);
+		memset(&buffer[c], 0, sizeof(buffer) - c);
+		p = buffer;
+	}
+	return ev_byte_channel_send(handle, count, p);
+}
+
 /*************************** EARLY CONSOLE DRIVER ***************************/
 
 #ifdef CONFIG_PPC_EARLY_DEBUG_EHV_BC
@@ -154,7 +169,7 @@ static void byte_channel_spin_send(const char data)
 
 	do {
 		count = 1;
-		ret = ev_byte_channel_send(CONFIG_PPC_EARLY_DEBUG_EHV_BC_HANDLE,
+		ret = local_ev_byte_channel_send(CONFIG_PPC_EARLY_DEBUG_EHV_BC_HANDLE,
 					   &count, &data);
 	} while (ret == EV_EAGAIN);
 }
@@ -221,7 +236,7 @@ static int ehv_bc_console_byte_channel_send(unsigned int handle, const char *s,
 	while (count) {
 		len = min_t(unsigned int, count, EV_BYTE_CHANNEL_MAX_BYTES);
 		do {
-			ret = ev_byte_channel_send(handle, &len, s);
+			ret = local_ev_byte_channel_send(handle, &len, s);
 		} while (ret == EV_EAGAIN);
 		count -= len;
 		s += len;
@@ -401,7 +416,7 @@ static void ehv_bc_tx_dequeue(struct ehv_bc_data *bc)
 			    CIRC_CNT_TO_END(bc->head, bc->tail, BUF_SIZE),
 			    EV_BYTE_CHANNEL_MAX_BYTES);
 
-		ret = ev_byte_channel_send(bc->handle, &len, bc->buf + bc->tail);
+		ret = local_ev_byte_channel_send(bc->handle, &len, bc->buf + bc->tail);
 
 		/* 'len' is valid only if the return code is 0 or EV_EAGAIN */
 		if (!ret || (ret == EV_EAGAIN))
diff --git a/drivers/tty/hvc/Kconfig b/drivers/tty/hvc/Kconfig
index 6a3c97d..31b7e1b 100644
--- a/drivers/tty/hvc/Kconfig
+++ b/drivers/tty/hvc/Kconfig
@@ -1,5 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0
-if TTY
 
 config HVC_DRIVER
 	bool
@@ -113,5 +112,3 @@
 	  will depend on arch specific APIs exported from hvcserver.ko
 	  which will also be compiled when this driver is built as a
 	  module.
-
-endif # TTY
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index d6644f3..0aea76c 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -3,8 +3,6 @@
 # Serial device configuration
 #
 
-if TTY
-
 menu "Serial drivers"
 	depends on HAS_IOMEM
 
@@ -1568,5 +1566,3 @@
 
 config SERIAL_MCTRL_GPIO
 	tristate
-
-endif # TTY
diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c
index a576989..6e725c6 100644
--- a/drivers/uio/uio.c
+++ b/drivers/uio/uio.c
@@ -996,6 +996,44 @@ int __uio_register_device(struct module *owner,
 }
 EXPORT_SYMBOL_GPL(__uio_register_device);
 
+static void devm_uio_unregister_device(struct device *dev, void *res)
+{
+	uio_unregister_device(*(struct uio_info **)res);
+}
+
+/**
+ * devm_uio_register_device - Resource managed uio_register_device()
+ * @owner:	module that creates the new device
+ * @parent:	parent device
+ * @info:	UIO device capabilities
+ *
+ * returns zero on success or a negative error code.
+ */
+int __devm_uio_register_device(struct module *owner,
+			       struct device *parent,
+			       struct uio_info *info)
+{
+	struct uio_info **ptr;
+	int ret;
+
+	ptr = devres_alloc(devm_uio_unregister_device, sizeof(*ptr),
+			   GFP_KERNEL);
+	if (!ptr)
+		return -ENOMEM;
+
+	*ptr = info;
+	ret = __uio_register_device(owner, parent, info);
+	if (ret) {
+		devres_free(ptr);
+		return ret;
+	}
+
+	devres_add(parent, ptr);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(__devm_uio_register_device);
+
 /**
  * uio_unregister_device - unregister a industrial IO device
  * @info:	UIO device capabilities
diff --git a/drivers/uio/uio_pdrv_genirq.c b/drivers/uio/uio_pdrv_genirq.c
index fc25ce9..ae319ef 100644
--- a/drivers/uio/uio_pdrv_genirq.c
+++ b/drivers/uio/uio_pdrv_genirq.c
@@ -99,6 +99,13 @@ static int uio_pdrv_genirq_irqcontrol(struct uio_info *dev_info, s32 irq_on)
 	return 0;
 }
 
+static void uio_pdrv_genirq_cleanup(void *data)
+{
+	struct device *dev = data;
+
+	pm_runtime_disable(dev);
+}
+
 static int uio_pdrv_genirq_probe(struct platform_device *pdev)
 {
 	struct uio_info *uioinfo = dev_get_platdata(&pdev->dev);
@@ -213,28 +220,16 @@ static int uio_pdrv_genirq_probe(struct platform_device *pdev)
 	 */
 	pm_runtime_enable(&pdev->dev);
 
-	ret = uio_register_device(&pdev->dev, priv->uioinfo);
-	if (ret) {
-		dev_err(&pdev->dev, "unable to register uio device\n");
-		pm_runtime_disable(&pdev->dev);
+	ret = devm_add_action_or_reset(&pdev->dev, uio_pdrv_genirq_cleanup,
+				       &pdev->dev);
+	if (ret)
 		return ret;
-	}
 
-	platform_set_drvdata(pdev, priv);
-	return 0;
-}
+	ret = devm_uio_register_device(&pdev->dev, priv->uioinfo);
+	if (ret)
+		dev_err(&pdev->dev, "unable to register uio device\n");
 
-static int uio_pdrv_genirq_remove(struct platform_device *pdev)
-{
-	struct uio_pdrv_genirq_platdata *priv = platform_get_drvdata(pdev);
-
-	uio_unregister_device(priv->uioinfo);
-	pm_runtime_disable(&pdev->dev);
-
-	priv->uioinfo->handler = NULL;
-	priv->uioinfo->irqcontrol = NULL;
-
-	return 0;
+	return ret;
 }
 
 static int uio_pdrv_genirq_runtime_nop(struct device *dev)
@@ -271,7 +266,6 @@ MODULE_PARM_DESC(of_id, "Openfirmware id of the device to be handled by uio");
 
 static struct platform_driver uio_pdrv_genirq = {
 	.probe = uio_pdrv_genirq_probe,
-	.remove = uio_pdrv_genirq_remove,
 	.driver = {
 		.name = DRIVER_NAME,
 		.pm = &uio_pdrv_genirq_dev_pm_ops,
diff --git a/drivers/usb/gadget/function/f_mass_storage.c b/drivers/usb/gadget/function/f_mass_storage.c
index 7c96c46..950d2a8 100644
--- a/drivers/usb/gadget/function/f_mass_storage.c
+++ b/drivers/usb/gadget/function/f_mass_storage.c
@@ -216,6 +216,7 @@
 #include <linux/freezer.h>
 #include <linux/module.h>
 #include <linux/uaccess.h>
+#include <asm/unaligned.h>
 
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
diff --git a/drivers/usb/gadget/function/storage_common.h b/drivers/usb/gadget/function/storage_common.h
index e5e3a25..bdeb1e2 100644
--- a/drivers/usb/gadget/function/storage_common.h
+++ b/drivers/usb/gadget/function/storage_common.h
@@ -172,11 +172,6 @@ enum data_direction {
 	DATA_DIR_NONE
 };
 
-static inline u32 get_unaligned_be24(u8 *buf)
-{
-	return 0xffffff & (u32) get_unaligned_be32(buf - 1);
-}
-
 static inline struct fsg_lun *fsg_lun_from_dev(struct device *dev)
 {
 	return container_of(dev, struct fsg_lun, dev);
diff --git a/drivers/vdpa/Kconfig b/drivers/vdpa/Kconfig
new file mode 100644
index 0000000..7db1460
--- /dev/null
+++ b/drivers/vdpa/Kconfig
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config VDPA
+	tristate
+	help
+	  Enable this module to support vDPA device that uses a
+	  datapath which complies with virtio specifications with
+	  vendor specific control path.
+
+menuconfig VDPA_MENU
+	bool "VDPA drivers"
+	default n
+
+if VDPA_MENU
+
+config VDPA_SIM
+	tristate "vDPA device simulator"
+	depends on RUNTIME_TESTING_MENU
+	select VDPA
+	select VHOST_RING
+	default n
+	help
+	  vDPA networking device simulator which loop TX traffic back
+	  to RX. This device is used for testing, prototyping and
+	  development of vDPA.
+
+config IFCVF
+	tristate "Intel IFC VF VDPA driver"
+	depends on PCI_MSI
+	select VDPA
+	default n
+	help
+	  This kernel module can drive Intel IFC VF NIC to offload
+	  virtio dataplane traffic to hardware.
+	  To compile this driver as a module, choose M here: the module will
+	  be called ifcvf.
+
+endif # VDPA_MENU
diff --git a/drivers/vdpa/Makefile b/drivers/vdpa/Makefile
new file mode 100644
index 0000000..8bbb686
--- /dev/null
+++ b/drivers/vdpa/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_VDPA) += vdpa.o
+obj-$(CONFIG_VDPA_SIM) += vdpa_sim/
+obj-$(CONFIG_IFCVF)    += ifcvf/
diff --git a/drivers/vdpa/ifcvf/Makefile b/drivers/vdpa/ifcvf/Makefile
new file mode 100644
index 0000000..d709915
--- /dev/null
+++ b/drivers/vdpa/ifcvf/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_IFCVF) += ifcvf.o
+ifcvf-$(CONFIG_IFCVF) += ifcvf_main.o ifcvf_base.o
diff --git a/drivers/vdpa/ifcvf/ifcvf_base.c b/drivers/vdpa/ifcvf/ifcvf_base.c
new file mode 100644
index 0000000..b61b06e
--- /dev/null
+++ b/drivers/vdpa/ifcvf/ifcvf_base.c
@@ -0,0 +1,389 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Intel IFC VF NIC driver for virtio dataplane offloading
+ *
+ * Copyright (C) 2020 Intel Corporation.
+ *
+ * Author: Zhu Lingshan <lingshan.zhu@intel.com>
+ *
+ */
+
+#include "ifcvf_base.h"
+
+static inline u8 ifc_ioread8(u8 __iomem *addr)
+{
+	return ioread8(addr);
+}
+static inline u16 ifc_ioread16 (__le16 __iomem *addr)
+{
+	return ioread16(addr);
+}
+
+static inline u32 ifc_ioread32(__le32 __iomem *addr)
+{
+	return ioread32(addr);
+}
+
+static inline void ifc_iowrite8(u8 value, u8 __iomem *addr)
+{
+	iowrite8(value, addr);
+}
+
+static inline void ifc_iowrite16(u16 value, __le16 __iomem *addr)
+{
+	iowrite16(value, addr);
+}
+
+static inline void ifc_iowrite32(u32 value, __le32 __iomem *addr)
+{
+	iowrite32(value, addr);
+}
+
+static void ifc_iowrite64_twopart(u64 val,
+				  __le32 __iomem *lo, __le32 __iomem *hi)
+{
+	ifc_iowrite32((u32)val, lo);
+	ifc_iowrite32(val >> 32, hi);
+}
+
+struct ifcvf_adapter *vf_to_adapter(struct ifcvf_hw *hw)
+{
+	return container_of(hw, struct ifcvf_adapter, vf);
+}
+
+static void __iomem *get_cap_addr(struct ifcvf_hw *hw,
+				  struct virtio_pci_cap *cap)
+{
+	struct ifcvf_adapter *ifcvf;
+	struct pci_dev *pdev;
+	u32 length, offset;
+	u8 bar;
+
+	length = le32_to_cpu(cap->length);
+	offset = le32_to_cpu(cap->offset);
+	bar = cap->bar;
+
+	ifcvf= vf_to_adapter(hw);
+	pdev = ifcvf->pdev;
+
+	if (bar >= IFCVF_PCI_MAX_RESOURCE) {
+		IFCVF_DBG(pdev,
+			  "Invalid bar number %u to get capabilities\n", bar);
+		return NULL;
+	}
+
+	if (offset + length > pci_resource_len(pdev, bar)) {
+		IFCVF_DBG(pdev,
+			  "offset(%u) + len(%u) overflows bar%u's capability\n",
+			  offset, length, bar);
+		return NULL;
+	}
+
+	return hw->base[bar] + offset;
+}
+
+static int ifcvf_read_config_range(struct pci_dev *dev,
+				   uint32_t *val, int size, int where)
+{
+	int ret, i;
+
+	for (i = 0; i < size; i += 4) {
+		ret = pci_read_config_dword(dev, where + i, val + i / 4);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+int ifcvf_init_hw(struct ifcvf_hw *hw, struct pci_dev *pdev)
+{
+	struct virtio_pci_cap cap;
+	u16 notify_off;
+	int ret;
+	u8 pos;
+	u32 i;
+
+	ret = pci_read_config_byte(pdev, PCI_CAPABILITY_LIST, &pos);
+	if (ret < 0) {
+		IFCVF_ERR(pdev, "Failed to read PCI capability list\n");
+		return -EIO;
+	}
+
+	while (pos) {
+		ret = ifcvf_read_config_range(pdev, (u32 *)&cap,
+					      sizeof(cap), pos);
+		if (ret < 0) {
+			IFCVF_ERR(pdev,
+				  "Failed to get PCI capability at %x\n", pos);
+			break;
+		}
+
+		if (cap.cap_vndr != PCI_CAP_ID_VNDR)
+			goto next;
+
+		switch (cap.cfg_type) {
+		case VIRTIO_PCI_CAP_COMMON_CFG:
+			hw->common_cfg = get_cap_addr(hw, &cap);
+			IFCVF_DBG(pdev, "hw->common_cfg = %p\n",
+				  hw->common_cfg);
+			break;
+		case VIRTIO_PCI_CAP_NOTIFY_CFG:
+			pci_read_config_dword(pdev, pos + sizeof(cap),
+					      &hw->notify_off_multiplier);
+			hw->notify_bar = cap.bar;
+			hw->notify_base = get_cap_addr(hw, &cap);
+			IFCVF_DBG(pdev, "hw->notify_base = %p\n",
+				  hw->notify_base);
+			break;
+		case VIRTIO_PCI_CAP_ISR_CFG:
+			hw->isr = get_cap_addr(hw, &cap);
+			IFCVF_DBG(pdev, "hw->isr = %p\n", hw->isr);
+			break;
+		case VIRTIO_PCI_CAP_DEVICE_CFG:
+			hw->net_cfg = get_cap_addr(hw, &cap);
+			IFCVF_DBG(pdev, "hw->net_cfg = %p\n", hw->net_cfg);
+			break;
+		}
+
+next:
+		pos = cap.cap_next;
+	}
+
+	if (hw->common_cfg == NULL || hw->notify_base == NULL ||
+	    hw->isr == NULL || hw->net_cfg == NULL) {
+		IFCVF_ERR(pdev, "Incomplete PCI capabilities\n");
+		return -EIO;
+	}
+
+	for (i = 0; i < IFCVF_MAX_QUEUE_PAIRS * 2; i++) {
+		ifc_iowrite16(i, &hw->common_cfg->queue_select);
+		notify_off = ifc_ioread16(&hw->common_cfg->queue_notify_off);
+		hw->vring[i].notify_addr = hw->notify_base +
+			notify_off * hw->notify_off_multiplier;
+	}
+
+	hw->lm_cfg = hw->base[IFCVF_LM_BAR];
+
+	IFCVF_DBG(pdev,
+		  "PCI capability mapping: common cfg: %p, notify base: %p\n, isr cfg: %p, device cfg: %p, multiplier: %u\n",
+		  hw->common_cfg, hw->notify_base, hw->isr,
+		  hw->net_cfg, hw->notify_off_multiplier);
+
+	return 0;
+}
+
+u8 ifcvf_get_status(struct ifcvf_hw *hw)
+{
+	return ifc_ioread8(&hw->common_cfg->device_status);
+}
+
+void ifcvf_set_status(struct ifcvf_hw *hw, u8 status)
+{
+	ifc_iowrite8(status, &hw->common_cfg->device_status);
+}
+
+void ifcvf_reset(struct ifcvf_hw *hw)
+{
+	ifcvf_set_status(hw, 0);
+	/* flush set_status, make sure VF is stopped, reset */
+	ifcvf_get_status(hw);
+}
+
+static void ifcvf_add_status(struct ifcvf_hw *hw, u8 status)
+{
+	if (status != 0)
+		status |= ifcvf_get_status(hw);
+
+	ifcvf_set_status(hw, status);
+	ifcvf_get_status(hw);
+}
+
+u64 ifcvf_get_features(struct ifcvf_hw *hw)
+{
+	struct virtio_pci_common_cfg __iomem *cfg = hw->common_cfg;
+	u32 features_lo, features_hi;
+
+	ifc_iowrite32(0, &cfg->device_feature_select);
+	features_lo = ifc_ioread32(&cfg->device_feature);
+
+	ifc_iowrite32(1, &cfg->device_feature_select);
+	features_hi = ifc_ioread32(&cfg->device_feature);
+
+	return ((u64)features_hi << 32) | features_lo;
+}
+
+void ifcvf_read_net_config(struct ifcvf_hw *hw, u64 offset,
+			   void *dst, int length)
+{
+	u8 old_gen, new_gen, *p;
+	int i;
+
+	WARN_ON(offset + length > sizeof(struct virtio_net_config));
+	do {
+		old_gen = ifc_ioread8(&hw->common_cfg->config_generation);
+		p = dst;
+		for (i = 0; i < length; i++)
+			*p++ = ifc_ioread8(hw->net_cfg + offset + i);
+
+		new_gen = ifc_ioread8(&hw->common_cfg->config_generation);
+	} while (old_gen != new_gen);
+}
+
+void ifcvf_write_net_config(struct ifcvf_hw *hw, u64 offset,
+			    const void *src, int length)
+{
+	const u8 *p;
+	int i;
+
+	p = src;
+	WARN_ON(offset + length > sizeof(struct virtio_net_config));
+	for (i = 0; i < length; i++)
+		ifc_iowrite8(*p++, hw->net_cfg + offset + i);
+}
+
+static void ifcvf_set_features(struct ifcvf_hw *hw, u64 features)
+{
+	struct virtio_pci_common_cfg __iomem *cfg = hw->common_cfg;
+
+	ifc_iowrite32(0, &cfg->guest_feature_select);
+	ifc_iowrite32((u32)features, &cfg->guest_feature);
+
+	ifc_iowrite32(1, &cfg->guest_feature_select);
+	ifc_iowrite32(features >> 32, &cfg->guest_feature);
+}
+
+static int ifcvf_config_features(struct ifcvf_hw *hw)
+{
+	struct ifcvf_adapter *ifcvf;
+
+	ifcvf = vf_to_adapter(hw);
+	ifcvf_set_features(hw, hw->req_features);
+	ifcvf_add_status(hw, VIRTIO_CONFIG_S_FEATURES_OK);
+
+	if (!(ifcvf_get_status(hw) & VIRTIO_CONFIG_S_FEATURES_OK)) {
+		IFCVF_ERR(ifcvf->pdev, "Failed to set FEATURES_OK status\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+u64 ifcvf_get_vq_state(struct ifcvf_hw *hw, u16 qid)
+{
+	struct ifcvf_lm_cfg __iomem *ifcvf_lm;
+	void __iomem *avail_idx_addr;
+	u16 last_avail_idx;
+	u32 q_pair_id;
+
+	ifcvf_lm = (struct ifcvf_lm_cfg __iomem *)hw->lm_cfg;
+	q_pair_id = qid / (IFCVF_MAX_QUEUE_PAIRS * 2);
+	avail_idx_addr = &ifcvf_lm->vring_lm_cfg[q_pair_id].idx_addr[qid % 2];
+	last_avail_idx = ifc_ioread16(avail_idx_addr);
+
+	return last_avail_idx;
+}
+
+int ifcvf_set_vq_state(struct ifcvf_hw *hw, u16 qid, u64 num)
+{
+	struct ifcvf_lm_cfg __iomem *ifcvf_lm;
+	void __iomem *avail_idx_addr;
+	u32 q_pair_id;
+
+	ifcvf_lm = (struct ifcvf_lm_cfg __iomem *)hw->lm_cfg;
+	q_pair_id = qid / (IFCVF_MAX_QUEUE_PAIRS * 2);
+	avail_idx_addr = &ifcvf_lm->vring_lm_cfg[q_pair_id].idx_addr[qid % 2];
+	hw->vring[qid].last_avail_idx = num;
+	ifc_iowrite16(num, avail_idx_addr);
+
+	return 0;
+}
+
+static int ifcvf_hw_enable(struct ifcvf_hw *hw)
+{
+	struct ifcvf_lm_cfg __iomem *ifcvf_lm;
+	struct virtio_pci_common_cfg __iomem *cfg;
+	struct ifcvf_adapter *ifcvf;
+	u32 i;
+
+	ifcvf_lm = (struct ifcvf_lm_cfg __iomem *)hw->lm_cfg;
+	ifcvf = vf_to_adapter(hw);
+	cfg = hw->common_cfg;
+	ifc_iowrite16(IFCVF_MSI_CONFIG_OFF, &cfg->msix_config);
+
+	if (ifc_ioread16(&cfg->msix_config) == VIRTIO_MSI_NO_VECTOR) {
+		IFCVF_ERR(ifcvf->pdev, "No msix vector for device config\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < hw->nr_vring; i++) {
+		if (!hw->vring[i].ready)
+			break;
+
+		ifc_iowrite16(i, &cfg->queue_select);
+		ifc_iowrite64_twopart(hw->vring[i].desc, &cfg->queue_desc_lo,
+				     &cfg->queue_desc_hi);
+		ifc_iowrite64_twopart(hw->vring[i].avail, &cfg->queue_avail_lo,
+				      &cfg->queue_avail_hi);
+		ifc_iowrite64_twopart(hw->vring[i].used, &cfg->queue_used_lo,
+				     &cfg->queue_used_hi);
+		ifc_iowrite16(hw->vring[i].size, &cfg->queue_size);
+		ifc_iowrite16(i + IFCVF_MSI_QUEUE_OFF, &cfg->queue_msix_vector);
+
+		if (ifc_ioread16(&cfg->queue_msix_vector) ==
+		    VIRTIO_MSI_NO_VECTOR) {
+			IFCVF_ERR(ifcvf->pdev,
+				  "No msix vector for queue %u\n", i);
+			return -EINVAL;
+		}
+
+		ifcvf_set_vq_state(hw, i, hw->vring[i].last_avail_idx);
+		ifc_iowrite16(1, &cfg->queue_enable);
+	}
+
+	return 0;
+}
+
+static void ifcvf_hw_disable(struct ifcvf_hw *hw)
+{
+	struct virtio_pci_common_cfg __iomem *cfg;
+	u32 i;
+
+	cfg = hw->common_cfg;
+	ifc_iowrite16(VIRTIO_MSI_NO_VECTOR, &cfg->msix_config);
+
+	for (i = 0; i < hw->nr_vring; i++) {
+		ifc_iowrite16(i, &cfg->queue_select);
+		ifc_iowrite16(VIRTIO_MSI_NO_VECTOR, &cfg->queue_msix_vector);
+	}
+
+	ifc_ioread16(&cfg->queue_msix_vector);
+}
+
+int ifcvf_start_hw(struct ifcvf_hw *hw)
+{
+	ifcvf_reset(hw);
+	ifcvf_add_status(hw, VIRTIO_CONFIG_S_ACKNOWLEDGE);
+	ifcvf_add_status(hw, VIRTIO_CONFIG_S_DRIVER);
+
+	if (ifcvf_config_features(hw) < 0)
+		return -EINVAL;
+
+	if (ifcvf_hw_enable(hw) < 0)
+		return -EINVAL;
+
+	ifcvf_add_status(hw, VIRTIO_CONFIG_S_DRIVER_OK);
+
+	return 0;
+}
+
+void ifcvf_stop_hw(struct ifcvf_hw *hw)
+{
+	ifcvf_hw_disable(hw);
+	ifcvf_reset(hw);
+}
+
+void ifcvf_notify_queue(struct ifcvf_hw *hw, u16 qid)
+{
+	ifc_iowrite16(qid, hw->vring[qid].notify_addr);
+}
diff --git a/drivers/vdpa/ifcvf/ifcvf_base.h b/drivers/vdpa/ifcvf/ifcvf_base.h
new file mode 100644
index 0000000..e803070
--- /dev/null
+++ b/drivers/vdpa/ifcvf/ifcvf_base.h
@@ -0,0 +1,118 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Intel IFC VF NIC driver for virtio dataplane offloading
+ *
+ * Copyright (C) 2020 Intel Corporation.
+ *
+ * Author: Zhu Lingshan <lingshan.zhu@intel.com>
+ *
+ */
+
+#ifndef _IFCVF_H_
+#define _IFCVF_H_
+
+#include <linux/pci.h>
+#include <linux/pci_regs.h>
+#include <linux/vdpa.h>
+#include <uapi/linux/virtio_net.h>
+#include <uapi/linux/virtio_config.h>
+#include <uapi/linux/virtio_pci.h>
+
+#define IFCVF_VENDOR_ID		0x1AF4
+#define IFCVF_DEVICE_ID		0x1041
+#define IFCVF_SUBSYS_VENDOR_ID	0x8086
+#define IFCVF_SUBSYS_DEVICE_ID	0x001A
+
+#define IFCVF_SUPPORTED_FEATURES \
+		((1ULL << VIRTIO_NET_F_MAC)			| \
+		 (1ULL << VIRTIO_F_ANY_LAYOUT)			| \
+		 (1ULL << VIRTIO_F_VERSION_1)			| \
+		 (1ULL << VIRTIO_F_ORDER_PLATFORM)		| \
+		 (1ULL << VIRTIO_F_IOMMU_PLATFORM)		| \
+		 (1ULL << VIRTIO_NET_F_MRG_RXBUF))
+
+/* Only one queue pair for now. */
+#define IFCVF_MAX_QUEUE_PAIRS	1
+
+#define IFCVF_QUEUE_ALIGNMENT	PAGE_SIZE
+#define IFCVF_QUEUE_MAX		32768
+#define IFCVF_MSI_CONFIG_OFF	0
+#define IFCVF_MSI_QUEUE_OFF	1
+#define IFCVF_PCI_MAX_RESOURCE	6
+
+#define IFCVF_LM_CFG_SIZE		0x40
+#define IFCVF_LM_RING_STATE_OFFSET	0x20
+#define IFCVF_LM_BAR			4
+
+#define IFCVF_ERR(pdev, fmt, ...)	dev_err(&pdev->dev, fmt, ##__VA_ARGS__)
+#define IFCVF_DBG(pdev, fmt, ...)	dev_dbg(&pdev->dev, fmt, ##__VA_ARGS__)
+#define IFCVF_INFO(pdev, fmt, ...)	dev_info(&pdev->dev, fmt, ##__VA_ARGS__)
+
+#define ifcvf_private_to_vf(adapter) \
+	(&((struct ifcvf_adapter *)adapter)->vf)
+
+#define IFCVF_MAX_INTR (IFCVF_MAX_QUEUE_PAIRS * 2 + 1)
+
+struct vring_info {
+	u64 desc;
+	u64 avail;
+	u64 used;
+	u16 size;
+	u16 last_avail_idx;
+	bool ready;
+	void __iomem *notify_addr;
+	u32 irq;
+	struct vdpa_callback cb;
+	char msix_name[256];
+};
+
+struct ifcvf_hw {
+	u8 __iomem *isr;
+	/* Live migration */
+	u8 __iomem *lm_cfg;
+	u16 nr_vring;
+	/* Notification bar number */
+	u8 notify_bar;
+	/* Notificaiton bar address */
+	void __iomem *notify_base;
+	u32 notify_off_multiplier;
+	u64 req_features;
+	struct virtio_pci_common_cfg __iomem *common_cfg;
+	void __iomem *net_cfg;
+	struct vring_info vring[IFCVF_MAX_QUEUE_PAIRS * 2];
+	void __iomem * const *base;
+};
+
+struct ifcvf_adapter {
+	struct vdpa_device vdpa;
+	struct pci_dev *pdev;
+	struct ifcvf_hw vf;
+};
+
+struct ifcvf_vring_lm_cfg {
+	u32 idx_addr[2];
+	u8 reserved[IFCVF_LM_CFG_SIZE - 8];
+};
+
+struct ifcvf_lm_cfg {
+	u8 reserved[IFCVF_LM_RING_STATE_OFFSET];
+	struct ifcvf_vring_lm_cfg vring_lm_cfg[IFCVF_MAX_QUEUE_PAIRS];
+};
+
+int ifcvf_init_hw(struct ifcvf_hw *hw, struct pci_dev *dev);
+int ifcvf_start_hw(struct ifcvf_hw *hw);
+void ifcvf_stop_hw(struct ifcvf_hw *hw);
+void ifcvf_notify_queue(struct ifcvf_hw *hw, u16 qid);
+void ifcvf_read_net_config(struct ifcvf_hw *hw, u64 offset,
+			   void *dst, int length);
+void ifcvf_write_net_config(struct ifcvf_hw *hw, u64 offset,
+			    const void *src, int length);
+u8 ifcvf_get_status(struct ifcvf_hw *hw);
+void ifcvf_set_status(struct ifcvf_hw *hw, u8 status);
+void io_write64_twopart(u64 val, u32 *lo, u32 *hi);
+void ifcvf_reset(struct ifcvf_hw *hw);
+u64 ifcvf_get_features(struct ifcvf_hw *hw);
+u64 ifcvf_get_vq_state(struct ifcvf_hw *hw, u16 qid);
+int ifcvf_set_vq_state(struct ifcvf_hw *hw, u16 qid, u64 num);
+struct ifcvf_adapter *vf_to_adapter(struct ifcvf_hw *hw);
+#endif /* _IFCVF_H_ */
diff --git a/drivers/vdpa/ifcvf/ifcvf_main.c b/drivers/vdpa/ifcvf/ifcvf_main.c
new file mode 100644
index 0000000..8d54dc5
--- /dev/null
+++ b/drivers/vdpa/ifcvf/ifcvf_main.c
@@ -0,0 +1,435 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Intel IFC VF NIC driver for virtio dataplane offloading
+ *
+ * Copyright (C) 2020 Intel Corporation.
+ *
+ * Author: Zhu Lingshan <lingshan.zhu@intel.com>
+ *
+ */
+
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/sysfs.h>
+#include "ifcvf_base.h"
+
+#define VERSION_STRING  "0.1"
+#define DRIVER_AUTHOR   "Intel Corporation"
+#define IFCVF_DRIVER_NAME       "ifcvf"
+
+static irqreturn_t ifcvf_intr_handler(int irq, void *arg)
+{
+	struct vring_info *vring = arg;
+
+	if (vring->cb.callback)
+		return vring->cb.callback(vring->cb.private);
+
+	return IRQ_HANDLED;
+}
+
+static int ifcvf_start_datapath(void *private)
+{
+	struct ifcvf_hw *vf = ifcvf_private_to_vf(private);
+	struct ifcvf_adapter *ifcvf;
+	u8 status;
+	int ret;
+
+	ifcvf = vf_to_adapter(vf);
+	vf->nr_vring = IFCVF_MAX_QUEUE_PAIRS * 2;
+	ret = ifcvf_start_hw(vf);
+	if (ret < 0) {
+		status = ifcvf_get_status(vf);
+		status |= VIRTIO_CONFIG_S_FAILED;
+		ifcvf_set_status(vf, status);
+	}
+
+	return ret;
+}
+
+static int ifcvf_stop_datapath(void *private)
+{
+	struct ifcvf_hw *vf = ifcvf_private_to_vf(private);
+	int i;
+
+	for (i = 0; i < IFCVF_MAX_QUEUE_PAIRS * 2; i++)
+		vf->vring[i].cb.callback = NULL;
+
+	ifcvf_stop_hw(vf);
+
+	return 0;
+}
+
+static void ifcvf_reset_vring(struct ifcvf_adapter *adapter)
+{
+	struct ifcvf_hw *vf = ifcvf_private_to_vf(adapter);
+	int i;
+
+	for (i = 0; i < IFCVF_MAX_QUEUE_PAIRS * 2; i++) {
+		vf->vring[i].last_avail_idx = 0;
+		vf->vring[i].desc = 0;
+		vf->vring[i].avail = 0;
+		vf->vring[i].used = 0;
+		vf->vring[i].ready = 0;
+		vf->vring[i].cb.callback = NULL;
+		vf->vring[i].cb.private = NULL;
+	}
+
+	ifcvf_reset(vf);
+}
+
+static struct ifcvf_adapter *vdpa_to_adapter(struct vdpa_device *vdpa_dev)
+{
+	return container_of(vdpa_dev, struct ifcvf_adapter, vdpa);
+}
+
+static struct ifcvf_hw *vdpa_to_vf(struct vdpa_device *vdpa_dev)
+{
+	struct ifcvf_adapter *adapter = vdpa_to_adapter(vdpa_dev);
+
+	return &adapter->vf;
+}
+
+static u64 ifcvf_vdpa_get_features(struct vdpa_device *vdpa_dev)
+{
+	struct ifcvf_hw *vf = vdpa_to_vf(vdpa_dev);
+	u64 features;
+
+	features = ifcvf_get_features(vf) & IFCVF_SUPPORTED_FEATURES;
+
+	return features;
+}
+
+static int ifcvf_vdpa_set_features(struct vdpa_device *vdpa_dev, u64 features)
+{
+	struct ifcvf_hw *vf = vdpa_to_vf(vdpa_dev);
+
+	vf->req_features = features;
+
+	return 0;
+}
+
+static u8 ifcvf_vdpa_get_status(struct vdpa_device *vdpa_dev)
+{
+	struct ifcvf_hw *vf = vdpa_to_vf(vdpa_dev);
+
+	return ifcvf_get_status(vf);
+}
+
+static void ifcvf_vdpa_set_status(struct vdpa_device *vdpa_dev, u8 status)
+{
+	struct ifcvf_adapter *adapter;
+	struct ifcvf_hw *vf;
+
+	vf  = vdpa_to_vf(vdpa_dev);
+	adapter = dev_get_drvdata(vdpa_dev->dev.parent);
+
+	if (status == 0) {
+		ifcvf_stop_datapath(adapter);
+		ifcvf_reset_vring(adapter);
+		return;
+	}
+
+	if (status & VIRTIO_CONFIG_S_DRIVER_OK) {
+		if (ifcvf_start_datapath(adapter) < 0)
+			IFCVF_ERR(adapter->pdev,
+				  "Failed to set ifcvf vdpa  status %u\n",
+				  status);
+	}
+
+	ifcvf_set_status(vf, status);
+}
+
+static u16 ifcvf_vdpa_get_vq_num_max(struct vdpa_device *vdpa_dev)
+{
+	return IFCVF_QUEUE_MAX;
+}
+
+static u64 ifcvf_vdpa_get_vq_state(struct vdpa_device *vdpa_dev, u16 qid)
+{
+	struct ifcvf_hw *vf = vdpa_to_vf(vdpa_dev);
+
+	return ifcvf_get_vq_state(vf, qid);
+}
+
+static int ifcvf_vdpa_set_vq_state(struct vdpa_device *vdpa_dev, u16 qid,
+				   u64 num)
+{
+	struct ifcvf_hw *vf = vdpa_to_vf(vdpa_dev);
+
+	return ifcvf_set_vq_state(vf, qid, num);
+}
+
+static void ifcvf_vdpa_set_vq_cb(struct vdpa_device *vdpa_dev, u16 qid,
+				 struct vdpa_callback *cb)
+{
+	struct ifcvf_hw *vf = vdpa_to_vf(vdpa_dev);
+
+	vf->vring[qid].cb = *cb;
+}
+
+static void ifcvf_vdpa_set_vq_ready(struct vdpa_device *vdpa_dev,
+				    u16 qid, bool ready)
+{
+	struct ifcvf_hw *vf = vdpa_to_vf(vdpa_dev);
+
+	vf->vring[qid].ready = ready;
+}
+
+static bool ifcvf_vdpa_get_vq_ready(struct vdpa_device *vdpa_dev, u16 qid)
+{
+	struct ifcvf_hw *vf = vdpa_to_vf(vdpa_dev);
+
+	return vf->vring[qid].ready;
+}
+
+static void ifcvf_vdpa_set_vq_num(struct vdpa_device *vdpa_dev, u16 qid,
+				  u32 num)
+{
+	struct ifcvf_hw *vf = vdpa_to_vf(vdpa_dev);
+
+	vf->vring[qid].size = num;
+}
+
+static int ifcvf_vdpa_set_vq_address(struct vdpa_device *vdpa_dev, u16 qid,
+				     u64 desc_area, u64 driver_area,
+				     u64 device_area)
+{
+	struct ifcvf_hw *vf = vdpa_to_vf(vdpa_dev);
+
+	vf->vring[qid].desc = desc_area;
+	vf->vring[qid].avail = driver_area;
+	vf->vring[qid].used = device_area;
+
+	return 0;
+}
+
+static void ifcvf_vdpa_kick_vq(struct vdpa_device *vdpa_dev, u16 qid)
+{
+	struct ifcvf_hw *vf = vdpa_to_vf(vdpa_dev);
+
+	ifcvf_notify_queue(vf, qid);
+}
+
+static u32 ifcvf_vdpa_get_generation(struct vdpa_device *vdpa_dev)
+{
+	struct ifcvf_hw *vf = vdpa_to_vf(vdpa_dev);
+
+	return ioread8(&vf->common_cfg->config_generation);
+}
+
+static u32 ifcvf_vdpa_get_device_id(struct vdpa_device *vdpa_dev)
+{
+	return VIRTIO_ID_NET;
+}
+
+static u32 ifcvf_vdpa_get_vendor_id(struct vdpa_device *vdpa_dev)
+{
+	return IFCVF_SUBSYS_VENDOR_ID;
+}
+
+static u16 ifcvf_vdpa_get_vq_align(struct vdpa_device *vdpa_dev)
+{
+	return IFCVF_QUEUE_ALIGNMENT;
+}
+
+static void ifcvf_vdpa_get_config(struct vdpa_device *vdpa_dev,
+				  unsigned int offset,
+				  void *buf, unsigned int len)
+{
+	struct ifcvf_hw *vf = vdpa_to_vf(vdpa_dev);
+
+	WARN_ON(offset + len > sizeof(struct virtio_net_config));
+	ifcvf_read_net_config(vf, offset, buf, len);
+}
+
+static void ifcvf_vdpa_set_config(struct vdpa_device *vdpa_dev,
+				  unsigned int offset, const void *buf,
+				  unsigned int len)
+{
+	struct ifcvf_hw *vf = vdpa_to_vf(vdpa_dev);
+
+	WARN_ON(offset + len > sizeof(struct virtio_net_config));
+	ifcvf_write_net_config(vf, offset, buf, len);
+}
+
+static void ifcvf_vdpa_set_config_cb(struct vdpa_device *vdpa_dev,
+				     struct vdpa_callback *cb)
+{
+	/* We don't support config interrupt */
+}
+
+/*
+ * IFCVF currently does't have on-chip IOMMU, so not
+ * implemented set_map()/dma_map()/dma_unmap()
+ */
+static const struct vdpa_config_ops ifc_vdpa_ops = {
+	.get_features	= ifcvf_vdpa_get_features,
+	.set_features	= ifcvf_vdpa_set_features,
+	.get_status	= ifcvf_vdpa_get_status,
+	.set_status	= ifcvf_vdpa_set_status,
+	.get_vq_num_max	= ifcvf_vdpa_get_vq_num_max,
+	.get_vq_state	= ifcvf_vdpa_get_vq_state,
+	.set_vq_state	= ifcvf_vdpa_set_vq_state,
+	.set_vq_cb	= ifcvf_vdpa_set_vq_cb,
+	.set_vq_ready	= ifcvf_vdpa_set_vq_ready,
+	.get_vq_ready	= ifcvf_vdpa_get_vq_ready,
+	.set_vq_num	= ifcvf_vdpa_set_vq_num,
+	.set_vq_address	= ifcvf_vdpa_set_vq_address,
+	.kick_vq	= ifcvf_vdpa_kick_vq,
+	.get_generation	= ifcvf_vdpa_get_generation,
+	.get_device_id	= ifcvf_vdpa_get_device_id,
+	.get_vendor_id	= ifcvf_vdpa_get_vendor_id,
+	.get_vq_align	= ifcvf_vdpa_get_vq_align,
+	.get_config	= ifcvf_vdpa_get_config,
+	.set_config	= ifcvf_vdpa_set_config,
+	.set_config_cb  = ifcvf_vdpa_set_config_cb,
+};
+
+static int ifcvf_request_irq(struct ifcvf_adapter *adapter)
+{
+	struct pci_dev *pdev = adapter->pdev;
+	struct ifcvf_hw *vf = &adapter->vf;
+	int vector, i, ret, irq;
+
+
+	for (i = 0; i < IFCVF_MAX_QUEUE_PAIRS * 2; i++) {
+		snprintf(vf->vring[i].msix_name, 256, "ifcvf[%s]-%d\n",
+			 pci_name(pdev), i);
+		vector = i + IFCVF_MSI_QUEUE_OFF;
+		irq = pci_irq_vector(pdev, vector);
+		ret = devm_request_irq(&pdev->dev, irq,
+				       ifcvf_intr_handler, 0,
+				       vf->vring[i].msix_name,
+				       &vf->vring[i]);
+		if (ret) {
+			IFCVF_ERR(pdev,
+				  "Failed to request irq for vq %d\n", i);
+			return ret;
+		}
+		vf->vring[i].irq = irq;
+	}
+
+	return 0;
+}
+
+static void ifcvf_free_irq_vectors(void *data)
+{
+	pci_free_irq_vectors(data);
+}
+
+static int ifcvf_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	struct device *dev = &pdev->dev;
+	struct ifcvf_adapter *adapter;
+	struct ifcvf_hw *vf;
+	int ret;
+
+	ret = pcim_enable_device(pdev);
+	if (ret) {
+		IFCVF_ERR(pdev, "Failed to enable device\n");
+		return ret;
+	}
+
+	ret = pcim_iomap_regions(pdev, BIT(0) | BIT(2) | BIT(4),
+				 IFCVF_DRIVER_NAME);
+	if (ret) {
+		IFCVF_ERR(pdev, "Failed to request MMIO region\n");
+		return ret;
+	}
+
+	ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
+	if (ret) {
+		IFCVF_ERR(pdev, "No usable DMA confiugration\n");
+		return ret;
+	}
+
+	ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+	if (ret) {
+		IFCVF_ERR(pdev,
+			  "No usable coherent DMA confiugration\n");
+		return ret;
+	}
+
+	ret = pci_alloc_irq_vectors(pdev, IFCVF_MAX_INTR,
+				    IFCVF_MAX_INTR, PCI_IRQ_MSIX);
+	if (ret < 0) {
+		IFCVF_ERR(pdev, "Failed to alloc irq vectors\n");
+		return ret;
+	}
+
+	ret = devm_add_action_or_reset(dev, ifcvf_free_irq_vectors, pdev);
+	if (ret) {
+		IFCVF_ERR(pdev,
+			  "Failed for adding devres for freeing irq vectors\n");
+		return ret;
+	}
+
+	adapter = vdpa_alloc_device(struct ifcvf_adapter, vdpa,
+				    dev, &ifc_vdpa_ops);
+	if (adapter == NULL) {
+		IFCVF_ERR(pdev, "Failed to allocate vDPA structure");
+		return -ENOMEM;
+	}
+
+	pci_set_master(pdev);
+	pci_set_drvdata(pdev, adapter);
+
+	vf = &adapter->vf;
+	vf->base = pcim_iomap_table(pdev);
+
+	adapter->pdev = pdev;
+	adapter->vdpa.dma_dev = &pdev->dev;
+
+	ret = ifcvf_request_irq(adapter);
+	if (ret) {
+		IFCVF_ERR(pdev, "Failed to request MSI-X irq\n");
+		goto err;
+	}
+
+	ret = ifcvf_init_hw(vf, pdev);
+	if (ret) {
+		IFCVF_ERR(pdev, "Failed to init IFCVF hw\n");
+		goto err;
+	}
+
+	ret = vdpa_register_device(&adapter->vdpa);
+	if (ret) {
+		IFCVF_ERR(pdev, "Failed to register ifcvf to vdpa bus");
+		goto err;
+	}
+
+	return 0;
+
+err:
+	put_device(&adapter->vdpa.dev);
+	return ret;
+}
+
+static void ifcvf_remove(struct pci_dev *pdev)
+{
+	struct ifcvf_adapter *adapter = pci_get_drvdata(pdev);
+
+	vdpa_unregister_device(&adapter->vdpa);
+}
+
+static struct pci_device_id ifcvf_pci_ids[] = {
+	{ PCI_DEVICE_SUB(IFCVF_VENDOR_ID,
+		IFCVF_DEVICE_ID,
+		IFCVF_SUBSYS_VENDOR_ID,
+		IFCVF_SUBSYS_DEVICE_ID) },
+	{ 0 },
+};
+MODULE_DEVICE_TABLE(pci, ifcvf_pci_ids);
+
+static struct pci_driver ifcvf_driver = {
+	.name     = IFCVF_DRIVER_NAME,
+	.id_table = ifcvf_pci_ids,
+	.probe    = ifcvf_probe,
+	.remove   = ifcvf_remove,
+};
+
+module_pci_driver(ifcvf_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION(VERSION_STRING);
diff --git a/drivers/vdpa/vdpa.c b/drivers/vdpa/vdpa.c
new file mode 100644
index 0000000..e9ed6a2
--- /dev/null
+++ b/drivers/vdpa/vdpa.c
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * vDPA bus.
+ *
+ * Copyright (c) 2020, Red Hat. All rights reserved.
+ *     Author: Jason Wang <jasowang@redhat.com>
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/idr.h>
+#include <linux/slab.h>
+#include <linux/vdpa.h>
+
+static DEFINE_IDA(vdpa_index_ida);
+
+static int vdpa_dev_probe(struct device *d)
+{
+	struct vdpa_device *vdev = dev_to_vdpa(d);
+	struct vdpa_driver *drv = drv_to_vdpa(vdev->dev.driver);
+	int ret = 0;
+
+	if (drv && drv->probe)
+		ret = drv->probe(vdev);
+
+	return ret;
+}
+
+static int vdpa_dev_remove(struct device *d)
+{
+	struct vdpa_device *vdev = dev_to_vdpa(d);
+	struct vdpa_driver *drv = drv_to_vdpa(vdev->dev.driver);
+
+	if (drv && drv->remove)
+		drv->remove(vdev);
+
+	return 0;
+}
+
+static struct bus_type vdpa_bus = {
+	.name  = "vdpa",
+	.probe = vdpa_dev_probe,
+	.remove = vdpa_dev_remove,
+};
+
+static void vdpa_release_dev(struct device *d)
+{
+	struct vdpa_device *vdev = dev_to_vdpa(d);
+	const struct vdpa_config_ops *ops = vdev->config;
+
+	if (ops->free)
+		ops->free(vdev);
+
+	ida_simple_remove(&vdpa_index_ida, vdev->index);
+	kfree(vdev);
+}
+
+/**
+ * __vdpa_alloc_device - allocate and initilaize a vDPA device
+ * This allows driver to some prepartion after device is
+ * initialized but before registered.
+ * @parent: the parent device
+ * @config: the bus operations that is supported by this device
+ * @size: size of the parent structure that contains private data
+ *
+ * Drvier should use vdap_alloc_device() wrapper macro instead of
+ * using this directly.
+ *
+ * Returns an error when parent/config/dma_dev is not set or fail to get
+ * ida.
+ */
+struct vdpa_device *__vdpa_alloc_device(struct device *parent,
+					const struct vdpa_config_ops *config,
+					size_t size)
+{
+	struct vdpa_device *vdev;
+	int err = -EINVAL;
+
+	if (!config)
+		goto err;
+
+	if (!!config->dma_map != !!config->dma_unmap)
+		goto err;
+
+	err = -ENOMEM;
+	vdev = kzalloc(size, GFP_KERNEL);
+	if (!vdev)
+		goto err;
+
+	err = ida_simple_get(&vdpa_index_ida, 0, 0, GFP_KERNEL);
+	if (err < 0)
+		goto err_ida;
+
+	vdev->dev.bus = &vdpa_bus;
+	vdev->dev.parent = parent;
+	vdev->dev.release = vdpa_release_dev;
+	vdev->index = err;
+	vdev->config = config;
+
+	err = dev_set_name(&vdev->dev, "vdpa%u", vdev->index);
+	if (err)
+		goto err_name;
+
+	device_initialize(&vdev->dev);
+
+	return vdev;
+
+err_name:
+	ida_simple_remove(&vdpa_index_ida, vdev->index);
+err_ida:
+	kfree(vdev);
+err:
+	return ERR_PTR(err);
+}
+EXPORT_SYMBOL_GPL(__vdpa_alloc_device);
+
+/**
+ * vdpa_register_device - register a vDPA device
+ * Callers must have a succeed call of vdpa_init_device() before.
+ * @vdev: the vdpa device to be registered to vDPA bus
+ *
+ * Returns an error when fail to add to vDPA bus
+ */
+int vdpa_register_device(struct vdpa_device *vdev)
+{
+	return device_add(&vdev->dev);
+}
+EXPORT_SYMBOL_GPL(vdpa_register_device);
+
+/**
+ * vdpa_unregister_device - unregister a vDPA device
+ * @vdev: the vdpa device to be unregisted from vDPA bus
+ */
+void vdpa_unregister_device(struct vdpa_device *vdev)
+{
+	device_unregister(&vdev->dev);
+}
+EXPORT_SYMBOL_GPL(vdpa_unregister_device);
+
+/**
+ * __vdpa_register_driver - register a vDPA device driver
+ * @drv: the vdpa device driver to be registered
+ * @owner: module owner of the driver
+ *
+ * Returns an err when fail to do the registration
+ */
+int __vdpa_register_driver(struct vdpa_driver *drv, struct module *owner)
+{
+	drv->driver.bus = &vdpa_bus;
+	drv->driver.owner = owner;
+
+	return driver_register(&drv->driver);
+}
+EXPORT_SYMBOL_GPL(__vdpa_register_driver);
+
+/**
+ * vdpa_unregister_driver - unregister a vDPA device driver
+ * @drv: the vdpa device driver to be unregistered
+ */
+void vdpa_unregister_driver(struct vdpa_driver *drv)
+{
+	driver_unregister(&drv->driver);
+}
+EXPORT_SYMBOL_GPL(vdpa_unregister_driver);
+
+static int vdpa_init(void)
+{
+	return bus_register(&vdpa_bus);
+}
+
+static void __exit vdpa_exit(void)
+{
+	bus_unregister(&vdpa_bus);
+	ida_destroy(&vdpa_index_ida);
+}
+core_initcall(vdpa_init);
+module_exit(vdpa_exit);
+
+MODULE_AUTHOR("Jason Wang <jasowang@redhat.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/vdpa/vdpa_sim/Makefile b/drivers/vdpa/vdpa_sim/Makefile
new file mode 100644
index 0000000..b40278f
--- /dev/null
+++ b/drivers/vdpa/vdpa_sim/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_VDPA_SIM) += vdpa_sim.o
diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c
new file mode 100644
index 0000000..6e8a0cf
--- /dev/null
+++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c
@@ -0,0 +1,629 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * VDPA networking device simulator.
+ *
+ * Copyright (c) 2020, Red Hat Inc. All rights reserved.
+ *     Author: Jason Wang <jasowang@redhat.com>
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/poll.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <linux/uuid.h>
+#include <linux/iommu.h>
+#include <linux/dma-mapping.h>
+#include <linux/sysfs.h>
+#include <linux/file.h>
+#include <linux/etherdevice.h>
+#include <linux/vringh.h>
+#include <linux/vdpa.h>
+#include <linux/vhost_iotlb.h>
+#include <uapi/linux/virtio_config.h>
+#include <uapi/linux/virtio_net.h>
+
+#define DRV_VERSION  "0.1"
+#define DRV_AUTHOR   "Jason Wang <jasowang@redhat.com>"
+#define DRV_DESC     "vDPA Device Simulator"
+#define DRV_LICENSE  "GPL v2"
+
+struct vdpasim_virtqueue {
+	struct vringh vring;
+	struct vringh_kiov iov;
+	unsigned short head;
+	bool ready;
+	u64 desc_addr;
+	u64 device_addr;
+	u64 driver_addr;
+	u32 num;
+	void *private;
+	irqreturn_t (*cb)(void *data);
+};
+
+#define VDPASIM_QUEUE_ALIGN PAGE_SIZE
+#define VDPASIM_QUEUE_MAX 256
+#define VDPASIM_DEVICE_ID 0x1
+#define VDPASIM_VENDOR_ID 0
+#define VDPASIM_VQ_NUM 0x2
+#define VDPASIM_NAME "vdpasim-netdev"
+
+static u64 vdpasim_features = (1ULL << VIRTIO_F_ANY_LAYOUT) |
+			      (1ULL << VIRTIO_F_VERSION_1)  |
+			      (1ULL << VIRTIO_F_IOMMU_PLATFORM);
+
+/* State of each vdpasim device */
+struct vdpasim {
+	struct vdpa_device vdpa;
+	struct vdpasim_virtqueue vqs[2];
+	struct work_struct work;
+	/* spinlock to synchronize virtqueue state */
+	spinlock_t lock;
+	struct virtio_net_config config;
+	struct vhost_iotlb *iommu;
+	void *buffer;
+	u32 status;
+	u32 generation;
+	u64 features;
+};
+
+static struct vdpasim *vdpasim_dev;
+
+static struct vdpasim *vdpa_to_sim(struct vdpa_device *vdpa)
+{
+	return container_of(vdpa, struct vdpasim, vdpa);
+}
+
+static struct vdpasim *dev_to_sim(struct device *dev)
+{
+	struct vdpa_device *vdpa = dev_to_vdpa(dev);
+
+	return vdpa_to_sim(vdpa);
+}
+
+static void vdpasim_queue_ready(struct vdpasim *vdpasim, unsigned int idx)
+{
+	struct vdpasim_virtqueue *vq = &vdpasim->vqs[idx];
+	int ret;
+
+	ret = vringh_init_iotlb(&vq->vring, vdpasim_features,
+				VDPASIM_QUEUE_MAX, false,
+				(struct vring_desc *)(uintptr_t)vq->desc_addr,
+				(struct vring_avail *)
+				(uintptr_t)vq->driver_addr,
+				(struct vring_used *)
+				(uintptr_t)vq->device_addr);
+}
+
+static void vdpasim_vq_reset(struct vdpasim_virtqueue *vq)
+{
+	vq->ready = 0;
+	vq->desc_addr = 0;
+	vq->driver_addr = 0;
+	vq->device_addr = 0;
+	vq->cb = NULL;
+	vq->private = NULL;
+	vringh_init_iotlb(&vq->vring, vdpasim_features, VDPASIM_QUEUE_MAX,
+			  false, NULL, NULL, NULL);
+}
+
+static void vdpasim_reset(struct vdpasim *vdpasim)
+{
+	int i;
+
+	for (i = 0; i < VDPASIM_VQ_NUM; i++)
+		vdpasim_vq_reset(&vdpasim->vqs[i]);
+
+	vhost_iotlb_reset(vdpasim->iommu);
+
+	vdpasim->features = 0;
+	vdpasim->status = 0;
+	++vdpasim->generation;
+}
+
+static void vdpasim_work(struct work_struct *work)
+{
+	struct vdpasim *vdpasim = container_of(work, struct
+						 vdpasim, work);
+	struct vdpasim_virtqueue *txq = &vdpasim->vqs[1];
+	struct vdpasim_virtqueue *rxq = &vdpasim->vqs[0];
+	size_t read, write, total_write;
+	int err;
+	int pkts = 0;
+
+	spin_lock(&vdpasim->lock);
+
+	if (!(vdpasim->status & VIRTIO_CONFIG_S_DRIVER_OK))
+		goto out;
+
+	if (!txq->ready || !rxq->ready)
+		goto out;
+
+	while (true) {
+		total_write = 0;
+		err = vringh_getdesc_iotlb(&txq->vring, &txq->iov, NULL,
+					   &txq->head, GFP_ATOMIC);
+		if (err <= 0)
+			break;
+
+		err = vringh_getdesc_iotlb(&rxq->vring, NULL, &rxq->iov,
+					   &rxq->head, GFP_ATOMIC);
+		if (err <= 0) {
+			vringh_complete_iotlb(&txq->vring, txq->head, 0);
+			break;
+		}
+
+		while (true) {
+			read = vringh_iov_pull_iotlb(&txq->vring, &txq->iov,
+						     vdpasim->buffer,
+						     PAGE_SIZE);
+			if (read <= 0)
+				break;
+
+			write = vringh_iov_push_iotlb(&rxq->vring, &rxq->iov,
+						      vdpasim->buffer, read);
+			if (write <= 0)
+				break;
+
+			total_write += write;
+		}
+
+		/* Make sure data is wrote before advancing index */
+		smp_wmb();
+
+		vringh_complete_iotlb(&txq->vring, txq->head, 0);
+		vringh_complete_iotlb(&rxq->vring, rxq->head, total_write);
+
+		/* Make sure used is visible before rasing the interrupt. */
+		smp_wmb();
+
+		local_bh_disable();
+		if (txq->cb)
+			txq->cb(txq->private);
+		if (rxq->cb)
+			rxq->cb(rxq->private);
+		local_bh_enable();
+
+		if (++pkts > 4) {
+			schedule_work(&vdpasim->work);
+			goto out;
+		}
+	}
+
+out:
+	spin_unlock(&vdpasim->lock);
+}
+
+static int dir_to_perm(enum dma_data_direction dir)
+{
+	int perm = -EFAULT;
+
+	switch (dir) {
+	case DMA_FROM_DEVICE:
+		perm = VHOST_MAP_WO;
+		break;
+	case DMA_TO_DEVICE:
+		perm = VHOST_MAP_RO;
+		break;
+	case DMA_BIDIRECTIONAL:
+		perm = VHOST_MAP_RW;
+		break;
+	default:
+		break;
+	}
+
+	return perm;
+}
+
+static dma_addr_t vdpasim_map_page(struct device *dev, struct page *page,
+				   unsigned long offset, size_t size,
+				   enum dma_data_direction dir,
+				   unsigned long attrs)
+{
+	struct vdpasim *vdpasim = dev_to_sim(dev);
+	struct vhost_iotlb *iommu = vdpasim->iommu;
+	u64 pa = (page_to_pfn(page) << PAGE_SHIFT) + offset;
+	int ret, perm = dir_to_perm(dir);
+
+	if (perm < 0)
+		return DMA_MAPPING_ERROR;
+
+	/* For simplicity, use identical mapping to avoid e.g iova
+	 * allocator.
+	 */
+	ret = vhost_iotlb_add_range(iommu, pa, pa + size - 1,
+				    pa, dir_to_perm(dir));
+	if (ret)
+		return DMA_MAPPING_ERROR;
+
+	return (dma_addr_t)(pa);
+}
+
+static void vdpasim_unmap_page(struct device *dev, dma_addr_t dma_addr,
+			       size_t size, enum dma_data_direction dir,
+			       unsigned long attrs)
+{
+	struct vdpasim *vdpasim = dev_to_sim(dev);
+	struct vhost_iotlb *iommu = vdpasim->iommu;
+
+	vhost_iotlb_del_range(iommu, (u64)dma_addr,
+			      (u64)dma_addr + size - 1);
+}
+
+static void *vdpasim_alloc_coherent(struct device *dev, size_t size,
+				    dma_addr_t *dma_addr, gfp_t flag,
+				    unsigned long attrs)
+{
+	struct vdpasim *vdpasim = dev_to_sim(dev);
+	struct vhost_iotlb *iommu = vdpasim->iommu;
+	void *addr = kmalloc(size, flag);
+	int ret;
+
+	if (!addr)
+		*dma_addr = DMA_MAPPING_ERROR;
+	else {
+		u64 pa = virt_to_phys(addr);
+
+		ret = vhost_iotlb_add_range(iommu, (u64)pa,
+					    (u64)pa + size - 1,
+					    pa, VHOST_MAP_RW);
+		if (ret) {
+			*dma_addr = DMA_MAPPING_ERROR;
+			kfree(addr);
+			addr = NULL;
+		} else
+			*dma_addr = (dma_addr_t)pa;
+	}
+
+	return addr;
+}
+
+static void vdpasim_free_coherent(struct device *dev, size_t size,
+				  void *vaddr, dma_addr_t dma_addr,
+				  unsigned long attrs)
+{
+	struct vdpasim *vdpasim = dev_to_sim(dev);
+	struct vhost_iotlb *iommu = vdpasim->iommu;
+
+	vhost_iotlb_del_range(iommu, (u64)dma_addr,
+			      (u64)dma_addr + size - 1);
+	kfree(phys_to_virt((uintptr_t)dma_addr));
+}
+
+static const struct dma_map_ops vdpasim_dma_ops = {
+	.map_page = vdpasim_map_page,
+	.unmap_page = vdpasim_unmap_page,
+	.alloc = vdpasim_alloc_coherent,
+	.free = vdpasim_free_coherent,
+};
+
+static const struct vdpa_config_ops vdpasim_net_config_ops;
+
+static struct vdpasim *vdpasim_create(void)
+{
+	struct virtio_net_config *config;
+	struct vdpasim *vdpasim;
+	struct device *dev;
+	int ret = -ENOMEM;
+
+	vdpasim = vdpa_alloc_device(struct vdpasim, vdpa, NULL,
+				    &vdpasim_net_config_ops);
+	if (!vdpasim)
+		goto err_alloc;
+
+	INIT_WORK(&vdpasim->work, vdpasim_work);
+	spin_lock_init(&vdpasim->lock);
+
+	dev = &vdpasim->vdpa.dev;
+	dev->coherent_dma_mask = DMA_BIT_MASK(64);
+	set_dma_ops(dev, &vdpasim_dma_ops);
+
+	vdpasim->iommu = vhost_iotlb_alloc(2048, 0);
+	if (!vdpasim->iommu)
+		goto err_iommu;
+
+	vdpasim->buffer = kmalloc(PAGE_SIZE, GFP_KERNEL);
+	if (!vdpasim->buffer)
+		goto err_iommu;
+
+	config = &vdpasim->config;
+	config->mtu = 1500;
+	config->status = VIRTIO_NET_S_LINK_UP;
+	eth_random_addr(config->mac);
+
+	vringh_set_iotlb(&vdpasim->vqs[0].vring, vdpasim->iommu);
+	vringh_set_iotlb(&vdpasim->vqs[1].vring, vdpasim->iommu);
+
+	vdpasim->vdpa.dma_dev = dev;
+	ret = vdpa_register_device(&vdpasim->vdpa);
+	if (ret)
+		goto err_iommu;
+
+	return vdpasim;
+
+err_iommu:
+	put_device(dev);
+err_alloc:
+	return ERR_PTR(ret);
+}
+
+static int vdpasim_set_vq_address(struct vdpa_device *vdpa, u16 idx,
+				  u64 desc_area, u64 driver_area,
+				  u64 device_area)
+{
+	struct vdpasim *vdpasim = vdpa_to_sim(vdpa);
+	struct vdpasim_virtqueue *vq = &vdpasim->vqs[idx];
+
+	vq->desc_addr = desc_area;
+	vq->driver_addr = driver_area;
+	vq->device_addr = device_area;
+
+	return 0;
+}
+
+static void vdpasim_set_vq_num(struct vdpa_device *vdpa, u16 idx, u32 num)
+{
+	struct vdpasim *vdpasim = vdpa_to_sim(vdpa);
+	struct vdpasim_virtqueue *vq = &vdpasim->vqs[idx];
+
+	vq->num = num;
+}
+
+static void vdpasim_kick_vq(struct vdpa_device *vdpa, u16 idx)
+{
+	struct vdpasim *vdpasim = vdpa_to_sim(vdpa);
+	struct vdpasim_virtqueue *vq = &vdpasim->vqs[idx];
+
+	if (vq->ready)
+		schedule_work(&vdpasim->work);
+}
+
+static void vdpasim_set_vq_cb(struct vdpa_device *vdpa, u16 idx,
+			      struct vdpa_callback *cb)
+{
+	struct vdpasim *vdpasim = vdpa_to_sim(vdpa);
+	struct vdpasim_virtqueue *vq = &vdpasim->vqs[idx];
+
+	vq->cb = cb->callback;
+	vq->private = cb->private;
+}
+
+static void vdpasim_set_vq_ready(struct vdpa_device *vdpa, u16 idx, bool ready)
+{
+	struct vdpasim *vdpasim = vdpa_to_sim(vdpa);
+	struct vdpasim_virtqueue *vq = &vdpasim->vqs[idx];
+
+	spin_lock(&vdpasim->lock);
+	vq->ready = ready;
+	if (vq->ready)
+		vdpasim_queue_ready(vdpasim, idx);
+	spin_unlock(&vdpasim->lock);
+}
+
+static bool vdpasim_get_vq_ready(struct vdpa_device *vdpa, u16 idx)
+{
+	struct vdpasim *vdpasim = vdpa_to_sim(vdpa);
+	struct vdpasim_virtqueue *vq = &vdpasim->vqs[idx];
+
+	return vq->ready;
+}
+
+static int vdpasim_set_vq_state(struct vdpa_device *vdpa, u16 idx, u64 state)
+{
+	struct vdpasim *vdpasim = vdpa_to_sim(vdpa);
+	struct vdpasim_virtqueue *vq = &vdpasim->vqs[idx];
+	struct vringh *vrh = &vq->vring;
+
+	spin_lock(&vdpasim->lock);
+	vrh->last_avail_idx = state;
+	spin_unlock(&vdpasim->lock);
+
+	return 0;
+}
+
+static u64 vdpasim_get_vq_state(struct vdpa_device *vdpa, u16 idx)
+{
+	struct vdpasim *vdpasim = vdpa_to_sim(vdpa);
+	struct vdpasim_virtqueue *vq = &vdpasim->vqs[idx];
+	struct vringh *vrh = &vq->vring;
+
+	return vrh->last_avail_idx;
+}
+
+static u16 vdpasim_get_vq_align(struct vdpa_device *vdpa)
+{
+	return VDPASIM_QUEUE_ALIGN;
+}
+
+static u64 vdpasim_get_features(struct vdpa_device *vdpa)
+{
+	return vdpasim_features;
+}
+
+static int vdpasim_set_features(struct vdpa_device *vdpa, u64 features)
+{
+	struct vdpasim *vdpasim = vdpa_to_sim(vdpa);
+
+	/* DMA mapping must be done by driver */
+	if (!(features & (1ULL << VIRTIO_F_IOMMU_PLATFORM)))
+		return -EINVAL;
+
+	vdpasim->features = features & vdpasim_features;
+
+	return 0;
+}
+
+static void vdpasim_set_config_cb(struct vdpa_device *vdpa,
+				  struct vdpa_callback *cb)
+{
+	/* We don't support config interrupt */
+}
+
+static u16 vdpasim_get_vq_num_max(struct vdpa_device *vdpa)
+{
+	return VDPASIM_QUEUE_MAX;
+}
+
+static u32 vdpasim_get_device_id(struct vdpa_device *vdpa)
+{
+	return VDPASIM_DEVICE_ID;
+}
+
+static u32 vdpasim_get_vendor_id(struct vdpa_device *vdpa)
+{
+	return VDPASIM_VENDOR_ID;
+}
+
+static u8 vdpasim_get_status(struct vdpa_device *vdpa)
+{
+	struct vdpasim *vdpasim = vdpa_to_sim(vdpa);
+	u8 status;
+
+	spin_lock(&vdpasim->lock);
+	status = vdpasim->status;
+	spin_unlock(&vdpasim->lock);
+
+	return vdpasim->status;
+}
+
+static void vdpasim_set_status(struct vdpa_device *vdpa, u8 status)
+{
+	struct vdpasim *vdpasim = vdpa_to_sim(vdpa);
+
+	spin_lock(&vdpasim->lock);
+	vdpasim->status = status;
+	if (status == 0)
+		vdpasim_reset(vdpasim);
+	spin_unlock(&vdpasim->lock);
+}
+
+static void vdpasim_get_config(struct vdpa_device *vdpa, unsigned int offset,
+			     void *buf, unsigned int len)
+{
+	struct vdpasim *vdpasim = vdpa_to_sim(vdpa);
+
+	if (offset + len < sizeof(struct virtio_net_config))
+		memcpy(buf, &vdpasim->config + offset, len);
+}
+
+static void vdpasim_set_config(struct vdpa_device *vdpa, unsigned int offset,
+			     const void *buf, unsigned int len)
+{
+	/* No writable config supportted by vdpasim */
+}
+
+static u32 vdpasim_get_generation(struct vdpa_device *vdpa)
+{
+	struct vdpasim *vdpasim = vdpa_to_sim(vdpa);
+
+	return vdpasim->generation;
+}
+
+static int vdpasim_set_map(struct vdpa_device *vdpa,
+			   struct vhost_iotlb *iotlb)
+{
+	struct vdpasim *vdpasim = vdpa_to_sim(vdpa);
+	struct vhost_iotlb_map *map;
+	u64 start = 0ULL, last = 0ULL - 1;
+	int ret;
+
+	vhost_iotlb_reset(vdpasim->iommu);
+
+	for (map = vhost_iotlb_itree_first(iotlb, start, last); map;
+	     map = vhost_iotlb_itree_next(map, start, last)) {
+		ret = vhost_iotlb_add_range(vdpasim->iommu, map->start,
+					    map->last, map->addr, map->perm);
+		if (ret)
+			goto err;
+	}
+	return 0;
+
+err:
+	vhost_iotlb_reset(vdpasim->iommu);
+	return ret;
+}
+
+static int vdpasim_dma_map(struct vdpa_device *vdpa, u64 iova, u64 size,
+			   u64 pa, u32 perm)
+{
+	struct vdpasim *vdpasim = vdpa_to_sim(vdpa);
+
+	return vhost_iotlb_add_range(vdpasim->iommu, iova,
+				     iova + size - 1, pa, perm);
+}
+
+static int vdpasim_dma_unmap(struct vdpa_device *vdpa, u64 iova, u64 size)
+{
+	struct vdpasim *vdpasim = vdpa_to_sim(vdpa);
+
+	vhost_iotlb_del_range(vdpasim->iommu, iova, iova + size - 1);
+
+	return 0;
+}
+
+static void vdpasim_free(struct vdpa_device *vdpa)
+{
+	struct vdpasim *vdpasim = vdpa_to_sim(vdpa);
+
+	cancel_work_sync(&vdpasim->work);
+	kfree(vdpasim->buffer);
+	if (vdpasim->iommu)
+		vhost_iotlb_free(vdpasim->iommu);
+}
+
+static const struct vdpa_config_ops vdpasim_net_config_ops = {
+	.set_vq_address         = vdpasim_set_vq_address,
+	.set_vq_num             = vdpasim_set_vq_num,
+	.kick_vq                = vdpasim_kick_vq,
+	.set_vq_cb              = vdpasim_set_vq_cb,
+	.set_vq_ready           = vdpasim_set_vq_ready,
+	.get_vq_ready           = vdpasim_get_vq_ready,
+	.set_vq_state           = vdpasim_set_vq_state,
+	.get_vq_state           = vdpasim_get_vq_state,
+	.get_vq_align           = vdpasim_get_vq_align,
+	.get_features           = vdpasim_get_features,
+	.set_features           = vdpasim_set_features,
+	.set_config_cb          = vdpasim_set_config_cb,
+	.get_vq_num_max         = vdpasim_get_vq_num_max,
+	.get_device_id          = vdpasim_get_device_id,
+	.get_vendor_id          = vdpasim_get_vendor_id,
+	.get_status             = vdpasim_get_status,
+	.set_status             = vdpasim_set_status,
+	.get_config             = vdpasim_get_config,
+	.set_config             = vdpasim_set_config,
+	.get_generation         = vdpasim_get_generation,
+	.set_map                = vdpasim_set_map,
+	.dma_map                = vdpasim_dma_map,
+	.dma_unmap              = vdpasim_dma_unmap,
+	.free                   = vdpasim_free,
+};
+
+static int __init vdpasim_dev_init(void)
+{
+	vdpasim_dev = vdpasim_create();
+
+	if (!IS_ERR(vdpasim_dev))
+		return 0;
+
+	return PTR_ERR(vdpasim_dev);
+}
+
+static void __exit vdpasim_dev_exit(void)
+{
+	struct vdpa_device *vdpa = &vdpasim_dev->vdpa;
+
+	vdpa_unregister_device(vdpa);
+}
+
+module_init(vdpasim_dev_init)
+module_exit(vdpasim_dev_exit)
+
+MODULE_VERSION(DRV_VERSION);
+MODULE_LICENSE(DRV_LICENSE);
+MODULE_AUTHOR(DRV_AUTHOR);
+MODULE_DESCRIPTION(DRV_DESC);
diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c
index 379a02c..6c6b37b 100644
--- a/drivers/vfio/pci/vfio_pci.c
+++ b/drivers/vfio/pci/vfio_pci.c
@@ -9,7 +9,6 @@
  */
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-#define dev_fmt pr_fmt
 
 #include <linux/device.h>
 #include <linux/eventfd.h>
@@ -54,6 +53,12 @@ module_param(disable_idle_d3, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(disable_idle_d3,
 		 "Disable using the PCI D3 low power state for idle, unused devices");
 
+static bool enable_sriov;
+#ifdef CONFIG_PCI_IOV
+module_param(enable_sriov, bool, 0644);
+MODULE_PARM_DESC(enable_sriov, "Enable support for SR-IOV configuration.  Enabling SR-IOV on a PF typically requires support of the userspace PF driver, enabling VFs without such support may result in non-functional VFs or PF.");
+#endif
+
 static inline bool vfio_vga_disabled(void)
 {
 #ifdef CONFIG_VFIO_PCI_VGA
@@ -466,6 +471,44 @@ static void vfio_pci_disable(struct vfio_pci_device *vdev)
 		vfio_pci_set_power_state(vdev, PCI_D3hot);
 }
 
+static struct pci_driver vfio_pci_driver;
+
+static struct vfio_pci_device *get_pf_vdev(struct vfio_pci_device *vdev,
+					   struct vfio_device **pf_dev)
+{
+	struct pci_dev *physfn = pci_physfn(vdev->pdev);
+
+	if (!vdev->pdev->is_virtfn)
+		return NULL;
+
+	*pf_dev = vfio_device_get_from_dev(&physfn->dev);
+	if (!*pf_dev)
+		return NULL;
+
+	if (pci_dev_driver(physfn) != &vfio_pci_driver) {
+		vfio_device_put(*pf_dev);
+		return NULL;
+	}
+
+	return vfio_device_data(*pf_dev);
+}
+
+static void vfio_pci_vf_token_user_add(struct vfio_pci_device *vdev, int val)
+{
+	struct vfio_device *pf_dev;
+	struct vfio_pci_device *pf_vdev = get_pf_vdev(vdev, &pf_dev);
+
+	if (!pf_vdev)
+		return;
+
+	mutex_lock(&pf_vdev->vf_token->lock);
+	pf_vdev->vf_token->users += val;
+	WARN_ON(pf_vdev->vf_token->users < 0);
+	mutex_unlock(&pf_vdev->vf_token->lock);
+
+	vfio_device_put(pf_dev);
+}
+
 static void vfio_pci_release(void *device_data)
 {
 	struct vfio_pci_device *vdev = device_data;
@@ -473,6 +516,7 @@ static void vfio_pci_release(void *device_data)
 	mutex_lock(&vdev->reflck->lock);
 
 	if (!(--vdev->refcnt)) {
+		vfio_pci_vf_token_user_add(vdev, -1);
 		vfio_spapr_pci_eeh_release(vdev->pdev);
 		vfio_pci_disable(vdev);
 	}
@@ -498,6 +542,7 @@ static int vfio_pci_open(void *device_data)
 			goto error;
 
 		vfio_spapr_pci_eeh_open(vdev->pdev);
+		vfio_pci_vf_token_user_add(vdev, 1);
 	}
 	vdev->refcnt++;
 error:
@@ -1140,6 +1185,65 @@ static long vfio_pci_ioctl(void *device_data,
 
 		return vfio_pci_ioeventfd(vdev, ioeventfd.offset,
 					  ioeventfd.data, count, ioeventfd.fd);
+	} else if (cmd == VFIO_DEVICE_FEATURE) {
+		struct vfio_device_feature feature;
+		uuid_t uuid;
+
+		minsz = offsetofend(struct vfio_device_feature, flags);
+
+		if (copy_from_user(&feature, (void __user *)arg, minsz))
+			return -EFAULT;
+
+		if (feature.argsz < minsz)
+			return -EINVAL;
+
+		/* Check unknown flags */
+		if (feature.flags & ~(VFIO_DEVICE_FEATURE_MASK |
+				      VFIO_DEVICE_FEATURE_SET |
+				      VFIO_DEVICE_FEATURE_GET |
+				      VFIO_DEVICE_FEATURE_PROBE))
+			return -EINVAL;
+
+		/* GET & SET are mutually exclusive except with PROBE */
+		if (!(feature.flags & VFIO_DEVICE_FEATURE_PROBE) &&
+		    (feature.flags & VFIO_DEVICE_FEATURE_SET) &&
+		    (feature.flags & VFIO_DEVICE_FEATURE_GET))
+			return -EINVAL;
+
+		switch (feature.flags & VFIO_DEVICE_FEATURE_MASK) {
+		case VFIO_DEVICE_FEATURE_PCI_VF_TOKEN:
+			if (!vdev->vf_token)
+				return -ENOTTY;
+
+			/*
+			 * We do not support GET of the VF Token UUID as this
+			 * could expose the token of the previous device user.
+			 */
+			if (feature.flags & VFIO_DEVICE_FEATURE_GET)
+				return -EINVAL;
+
+			if (feature.flags & VFIO_DEVICE_FEATURE_PROBE)
+				return 0;
+
+			/* Don't SET unless told to do so */
+			if (!(feature.flags & VFIO_DEVICE_FEATURE_SET))
+				return -EINVAL;
+
+			if (feature.argsz < minsz + sizeof(uuid))
+				return -EINVAL;
+
+			if (copy_from_user(&uuid, (void __user *)(arg + minsz),
+					   sizeof(uuid)))
+				return -EFAULT;
+
+			mutex_lock(&vdev->vf_token->lock);
+			uuid_copy(&vdev->vf_token->uuid, &uuid);
+			mutex_unlock(&vdev->vf_token->lock);
+
+			return 0;
+		default:
+			return -ENOTTY;
+		}
 	}
 
 	return -ENOTTY;
@@ -1278,6 +1382,150 @@ static void vfio_pci_request(void *device_data, unsigned int count)
 	mutex_unlock(&vdev->igate);
 }
 
+static int vfio_pci_validate_vf_token(struct vfio_pci_device *vdev,
+				      bool vf_token, uuid_t *uuid)
+{
+	/*
+	 * There's always some degree of trust or collaboration between SR-IOV
+	 * PF and VFs, even if just that the PF hosts the SR-IOV capability and
+	 * can disrupt VFs with a reset, but often the PF has more explicit
+	 * access to deny service to the VF or access data passed through the
+	 * VF.  We therefore require an opt-in via a shared VF token (UUID) to
+	 * represent this trust.  This both prevents that a VF driver might
+	 * assume the PF driver is a trusted, in-kernel driver, and also that
+	 * a PF driver might be replaced with a rogue driver, unknown to in-use
+	 * VF drivers.
+	 *
+	 * Therefore when presented with a VF, if the PF is a vfio device and
+	 * it is bound to the vfio-pci driver, the user needs to provide a VF
+	 * token to access the device, in the form of appending a vf_token to
+	 * the device name, for example:
+	 *
+	 * "0000:04:10.0 vf_token=bd8d9d2b-5a5f-4f5a-a211-f591514ba1f3"
+	 *
+	 * When presented with a PF which has VFs in use, the user must also
+	 * provide the current VF token to prove collaboration with existing
+	 * VF users.  If VFs are not in use, the VF token provided for the PF
+	 * device will act to set the VF token.
+	 *
+	 * If the VF token is provided but unused, an error is generated.
+	 */
+	if (!vdev->pdev->is_virtfn && !vdev->vf_token && !vf_token)
+		return 0; /* No VF token provided or required */
+
+	if (vdev->pdev->is_virtfn) {
+		struct vfio_device *pf_dev;
+		struct vfio_pci_device *pf_vdev = get_pf_vdev(vdev, &pf_dev);
+		bool match;
+
+		if (!pf_vdev) {
+			if (!vf_token)
+				return 0; /* PF is not vfio-pci, no VF token */
+
+			pci_info_ratelimited(vdev->pdev,
+				"VF token incorrectly provided, PF not bound to vfio-pci\n");
+			return -EINVAL;
+		}
+
+		if (!vf_token) {
+			vfio_device_put(pf_dev);
+			pci_info_ratelimited(vdev->pdev,
+				"VF token required to access device\n");
+			return -EACCES;
+		}
+
+		mutex_lock(&pf_vdev->vf_token->lock);
+		match = uuid_equal(uuid, &pf_vdev->vf_token->uuid);
+		mutex_unlock(&pf_vdev->vf_token->lock);
+
+		vfio_device_put(pf_dev);
+
+		if (!match) {
+			pci_info_ratelimited(vdev->pdev,
+				"Incorrect VF token provided for device\n");
+			return -EACCES;
+		}
+	} else if (vdev->vf_token) {
+		mutex_lock(&vdev->vf_token->lock);
+		if (vdev->vf_token->users) {
+			if (!vf_token) {
+				mutex_unlock(&vdev->vf_token->lock);
+				pci_info_ratelimited(vdev->pdev,
+					"VF token required to access device\n");
+				return -EACCES;
+			}
+
+			if (!uuid_equal(uuid, &vdev->vf_token->uuid)) {
+				mutex_unlock(&vdev->vf_token->lock);
+				pci_info_ratelimited(vdev->pdev,
+					"Incorrect VF token provided for device\n");
+				return -EACCES;
+			}
+		} else if (vf_token) {
+			uuid_copy(&vdev->vf_token->uuid, uuid);
+		}
+
+		mutex_unlock(&vdev->vf_token->lock);
+	} else if (vf_token) {
+		pci_info_ratelimited(vdev->pdev,
+			"VF token incorrectly provided, not a PF or VF\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+#define VF_TOKEN_ARG "vf_token="
+
+static int vfio_pci_match(void *device_data, char *buf)
+{
+	struct vfio_pci_device *vdev = device_data;
+	bool vf_token = false;
+	uuid_t uuid;
+	int ret;
+
+	if (strncmp(pci_name(vdev->pdev), buf, strlen(pci_name(vdev->pdev))))
+		return 0; /* No match */
+
+	if (strlen(buf) > strlen(pci_name(vdev->pdev))) {
+		buf += strlen(pci_name(vdev->pdev));
+
+		if (*buf != ' ')
+			return 0; /* No match: non-whitespace after name */
+
+		while (*buf) {
+			if (*buf == ' ') {
+				buf++;
+				continue;
+			}
+
+			if (!vf_token && !strncmp(buf, VF_TOKEN_ARG,
+						  strlen(VF_TOKEN_ARG))) {
+				buf += strlen(VF_TOKEN_ARG);
+
+				if (strlen(buf) < UUID_STRING_LEN)
+					return -EINVAL;
+
+				ret = uuid_parse(buf, &uuid);
+				if (ret)
+					return ret;
+
+				vf_token = true;
+				buf += UUID_STRING_LEN;
+			} else {
+				/* Unknown/duplicate option */
+				return -EINVAL;
+			}
+		}
+	}
+
+	ret = vfio_pci_validate_vf_token(vdev, vf_token, &uuid);
+	if (ret)
+		return ret;
+
+	return 1; /* Match */
+}
+
 static const struct vfio_device_ops vfio_pci_ops = {
 	.name		= "vfio-pci",
 	.open		= vfio_pci_open,
@@ -1287,10 +1535,40 @@ static const struct vfio_device_ops vfio_pci_ops = {
 	.write		= vfio_pci_write,
 	.mmap		= vfio_pci_mmap,
 	.request	= vfio_pci_request,
+	.match		= vfio_pci_match,
 };
 
 static int vfio_pci_reflck_attach(struct vfio_pci_device *vdev);
 static void vfio_pci_reflck_put(struct vfio_pci_reflck *reflck);
+static struct pci_driver vfio_pci_driver;
+
+static int vfio_pci_bus_notifier(struct notifier_block *nb,
+				 unsigned long action, void *data)
+{
+	struct vfio_pci_device *vdev = container_of(nb,
+						    struct vfio_pci_device, nb);
+	struct device *dev = data;
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct pci_dev *physfn = pci_physfn(pdev);
+
+	if (action == BUS_NOTIFY_ADD_DEVICE &&
+	    pdev->is_virtfn && physfn == vdev->pdev) {
+		pci_info(vdev->pdev, "Captured SR-IOV VF %s driver_override\n",
+			 pci_name(pdev));
+		pdev->driver_override = kasprintf(GFP_KERNEL, "%s",
+						  vfio_pci_ops.name);
+	} else if (action == BUS_NOTIFY_BOUND_DRIVER &&
+		   pdev->is_virtfn && physfn == vdev->pdev) {
+		struct pci_driver *drv = pci_dev_driver(pdev);
+
+		if (drv && drv != &vfio_pci_driver)
+			pci_warn(vdev->pdev,
+				 "VF %s bound to driver %s while PF bound to vfio-pci\n",
+				 pci_name(pdev), drv->name);
+	}
+
+	return 0;
+}
 
 static int vfio_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
@@ -1302,12 +1580,12 @@ static int vfio_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		return -EINVAL;
 
 	/*
-	 * Prevent binding to PFs with VFs enabled, this too easily allows
-	 * userspace instance with VFs and PFs from the same device, which
-	 * cannot work.  Disabling SR-IOV here would initiate removing the
-	 * VFs, which would unbind the driver, which is prone to blocking
-	 * if that VF is also in use by vfio-pci.  Just reject these PFs
-	 * and let the user sort it out.
+	 * Prevent binding to PFs with VFs enabled, the VFs might be in use
+	 * by the host or other users.  We cannot capture the VFs if they
+	 * already exist, nor can we track VF users.  Disabling SR-IOV here
+	 * would initiate removing the VFs, which would unbind the driver,
+	 * which is prone to blocking if that VF is also in use by vfio-pci.
+	 * Just reject these PFs and let the user sort it out.
 	 */
 	if (pci_num_vf(pdev)) {
 		pci_warn(pdev, "Cannot bind to PF with SR-IOV enabled\n");
@@ -1320,8 +1598,8 @@ static int vfio_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	vdev = kzalloc(sizeof(*vdev), GFP_KERNEL);
 	if (!vdev) {
-		vfio_iommu_group_put(group, &pdev->dev);
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto out_group_put;
 	}
 
 	vdev->pdev = pdev;
@@ -1332,18 +1610,27 @@ static int vfio_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	INIT_LIST_HEAD(&vdev->ioeventfds_list);
 
 	ret = vfio_add_group_dev(&pdev->dev, &vfio_pci_ops, vdev);
-	if (ret) {
-		vfio_iommu_group_put(group, &pdev->dev);
-		kfree(vdev);
-		return ret;
-	}
+	if (ret)
+		goto out_free;
 
 	ret = vfio_pci_reflck_attach(vdev);
-	if (ret) {
-		vfio_del_group_dev(&pdev->dev);
-		vfio_iommu_group_put(group, &pdev->dev);
-		kfree(vdev);
-		return ret;
+	if (ret)
+		goto out_del_group_dev;
+
+	if (pdev->is_physfn) {
+		vdev->vf_token = kzalloc(sizeof(*vdev->vf_token), GFP_KERNEL);
+		if (!vdev->vf_token) {
+			ret = -ENOMEM;
+			goto out_reflck;
+		}
+
+		mutex_init(&vdev->vf_token->lock);
+		uuid_gen(&vdev->vf_token->uuid);
+
+		vdev->nb.notifier_call = vfio_pci_bus_notifier;
+		ret = bus_register_notifier(&pci_bus_type, &vdev->nb);
+		if (ret)
+			goto out_vf_token;
 	}
 
 	if (vfio_pci_is_vga(pdev)) {
@@ -1369,16 +1656,39 @@ static int vfio_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	}
 
 	return ret;
+
+out_vf_token:
+	kfree(vdev->vf_token);
+out_reflck:
+	vfio_pci_reflck_put(vdev->reflck);
+out_del_group_dev:
+	vfio_del_group_dev(&pdev->dev);
+out_free:
+	kfree(vdev);
+out_group_put:
+	vfio_iommu_group_put(group, &pdev->dev);
+	return ret;
 }
 
 static void vfio_pci_remove(struct pci_dev *pdev)
 {
 	struct vfio_pci_device *vdev;
 
+	pci_disable_sriov(pdev);
+
 	vdev = vfio_del_group_dev(&pdev->dev);
 	if (!vdev)
 		return;
 
+	if (vdev->vf_token) {
+		WARN_ON(vdev->vf_token->users);
+		mutex_destroy(&vdev->vf_token->lock);
+		kfree(vdev->vf_token);
+	}
+
+	if (vdev->nb.notifier_call)
+		bus_unregister_notifier(&pci_bus_type, &vdev->nb);
+
 	vfio_pci_reflck_put(vdev->reflck);
 
 	vfio_iommu_group_put(pdev->dev.iommu_group, &pdev->dev);
@@ -1427,16 +1737,48 @@ static pci_ers_result_t vfio_pci_aer_err_detected(struct pci_dev *pdev,
 	return PCI_ERS_RESULT_CAN_RECOVER;
 }
 
+static int vfio_pci_sriov_configure(struct pci_dev *pdev, int nr_virtfn)
+{
+	struct vfio_pci_device *vdev;
+	struct vfio_device *device;
+	int ret = 0;
+
+	might_sleep();
+
+	if (!enable_sriov)
+		return -ENOENT;
+
+	device = vfio_device_get_from_dev(&pdev->dev);
+	if (!device)
+		return -ENODEV;
+
+	vdev = vfio_device_data(device);
+	if (!vdev) {
+		vfio_device_put(device);
+		return -ENODEV;
+	}
+
+	if (nr_virtfn == 0)
+		pci_disable_sriov(pdev);
+	else
+		ret = pci_enable_sriov(pdev, nr_virtfn);
+
+	vfio_device_put(device);
+
+	return ret < 0 ? ret : nr_virtfn;
+}
+
 static const struct pci_error_handlers vfio_err_handlers = {
 	.error_detected = vfio_pci_aer_err_detected,
 };
 
 static struct pci_driver vfio_pci_driver = {
-	.name		= "vfio-pci",
-	.id_table	= NULL, /* only dynamic ids */
-	.probe		= vfio_pci_probe,
-	.remove		= vfio_pci_remove,
-	.err_handler	= &vfio_err_handlers,
+	.name			= "vfio-pci",
+	.id_table		= NULL, /* only dynamic ids */
+	.probe			= vfio_pci_probe,
+	.remove			= vfio_pci_remove,
+	.sriov_configure	= vfio_pci_sriov_configure,
+	.err_handler		= &vfio_err_handlers,
 };
 
 static DEFINE_MUTEX(reflck_lock);
diff --git a/drivers/vfio/pci/vfio_pci_nvlink2.c b/drivers/vfio/pci/vfio_pci_nvlink2.c
index df4d960..ed20d73 100644
--- a/drivers/vfio/pci/vfio_pci_nvlink2.c
+++ b/drivers/vfio/pci/vfio_pci_nvlink2.c
@@ -422,8 +422,14 @@ int vfio_pci_ibm_npu2_init(struct vfio_pci_device *vdev)
 
 	if (of_property_read_u64_index(hose->dn, "ibm,mmio-atsd", nvlink_index,
 			&mmio_atsd)) {
-		dev_warn(&vdev->pdev->dev, "No available ATSD found\n");
-		mmio_atsd = 0;
+		if (of_property_read_u64_index(hose->dn, "ibm,mmio-atsd", 0,
+				&mmio_atsd)) {
+			dev_warn(&vdev->pdev->dev, "No available ATSD found\n");
+			mmio_atsd = 0;
+		} else {
+			dev_warn(&vdev->pdev->dev,
+				 "Using fallback ibm,mmio-atsd[0] for ATSD.\n");
+		}
 	}
 
 	if (of_property_read_u64(npu_node, "ibm,device-tgt-addr", &tgt)) {
diff --git a/drivers/vfio/pci/vfio_pci_private.h b/drivers/vfio/pci/vfio_pci_private.h
index 8a2c760..36ec690 100644
--- a/drivers/vfio/pci/vfio_pci_private.h
+++ b/drivers/vfio/pci/vfio_pci_private.h
@@ -12,6 +12,8 @@
 #include <linux/pci.h>
 #include <linux/irqbypass.h>
 #include <linux/types.h>
+#include <linux/uuid.h>
+#include <linux/notifier.h>
 
 #ifndef VFIO_PCI_PRIVATE_H
 #define VFIO_PCI_PRIVATE_H
@@ -84,6 +86,12 @@ struct vfio_pci_reflck {
 	struct mutex		lock;
 };
 
+struct vfio_pci_vf_token {
+	struct mutex		lock;
+	uuid_t			uuid;
+	int			users;
+};
+
 struct vfio_pci_device {
 	struct pci_dev		*pdev;
 	void __iomem		*barmap[PCI_STD_NUM_BARS];
@@ -122,6 +130,8 @@ struct vfio_pci_device {
 	struct list_head	dummy_resources_list;
 	struct mutex		ioeventfds_lock;
 	struct list_head	ioeventfds_list;
+	struct vfio_pci_vf_token	*vf_token;
+	struct notifier_block	nb;
 };
 
 #define is_intx(vdev) (vdev->irq_type == VFIO_PCI_INTX_IRQ_INDEX)
diff --git a/drivers/vfio/platform/vfio_platform.c b/drivers/vfio/platform/vfio_platform.c
index ae1a5eb..1e27690 100644
--- a/drivers/vfio/platform/vfio_platform.c
+++ b/drivers/vfio/platform/vfio_platform.c
@@ -44,7 +44,7 @@ static int get_platform_irq(struct vfio_platform_device *vdev, int i)
 {
 	struct platform_device *pdev = (struct platform_device *) vdev->opaque;
 
-	return platform_get_irq(pdev, i);
+	return platform_get_irq_optional(pdev, i);
 }
 
 static int vfio_platform_probe(struct platform_device *pdev)
diff --git a/drivers/vfio/vfio.c b/drivers/vfio/vfio.c
index c848262..765e0e5d 100644
--- a/drivers/vfio/vfio.c
+++ b/drivers/vfio/vfio.c
@@ -875,11 +875,23 @@ EXPORT_SYMBOL_GPL(vfio_device_get_from_dev);
 static struct vfio_device *vfio_device_get_from_name(struct vfio_group *group,
 						     char *buf)
 {
-	struct vfio_device *it, *device = NULL;
+	struct vfio_device *it, *device = ERR_PTR(-ENODEV);
 
 	mutex_lock(&group->device_lock);
 	list_for_each_entry(it, &group->device_list, group_next) {
-		if (!strcmp(dev_name(it->dev), buf)) {
+		int ret;
+
+		if (it->ops->match) {
+			ret = it->ops->match(it->device_data, buf);
+			if (ret < 0) {
+				device = ERR_PTR(ret);
+				break;
+			}
+		} else {
+			ret = !strcmp(dev_name(it->dev), buf);
+		}
+
+		if (ret) {
 			device = it;
 			vfio_device_get(device);
 			break;
@@ -1430,8 +1442,8 @@ static int vfio_group_get_device_fd(struct vfio_group *group, char *buf)
 		return -EPERM;
 
 	device = vfio_device_get_from_name(group, buf);
-	if (!device)
-		return -ENODEV;
+	if (IS_ERR(device))
+		return PTR_ERR(device);
 
 	ret = device->ops->open(device->device_data);
 	if (ret) {
@@ -1720,6 +1732,44 @@ struct vfio_group *vfio_group_get_external_user(struct file *filep)
 }
 EXPORT_SYMBOL_GPL(vfio_group_get_external_user);
 
+/**
+ * External user API, exported by symbols to be linked dynamically.
+ * The external user passes in a device pointer
+ * to verify that:
+ *	- A VFIO group is assiciated with the device;
+ *	- IOMMU is set for the group.
+ * If both checks passed, vfio_group_get_external_user_from_dev()
+ * increments the container user counter to prevent the VFIO group
+ * from disposal before external user exits and returns the pointer
+ * to the VFIO group.
+ *
+ * When the external user finishes using the VFIO group, it calls
+ * vfio_group_put_external_user() to release the VFIO group and
+ * decrement the container user counter.
+ *
+ * @dev [in]	: device
+ * Return error PTR or pointer to VFIO group.
+ */
+
+struct vfio_group *vfio_group_get_external_user_from_dev(struct device *dev)
+{
+	struct vfio_group *group;
+	int ret;
+
+	group = vfio_group_get_from_dev(dev);
+	if (!group)
+		return ERR_PTR(-ENODEV);
+
+	ret = vfio_group_add_container_user(group);
+	if (ret) {
+		vfio_group_put(group);
+		return ERR_PTR(ret);
+	}
+
+	return group;
+}
+EXPORT_SYMBOL_GPL(vfio_group_get_external_user_from_dev);
+
 void vfio_group_put_external_user(struct vfio_group *group)
 {
 	vfio_group_try_dissolve_container(group);
@@ -1961,6 +2011,146 @@ int vfio_unpin_pages(struct device *dev, unsigned long *user_pfn, int npage)
 }
 EXPORT_SYMBOL(vfio_unpin_pages);
 
+/*
+ * Pin a set of guest IOVA PFNs and return their associated host PFNs for a
+ * VFIO group.
+ *
+ * The caller needs to call vfio_group_get_external_user() or
+ * vfio_group_get_external_user_from_dev() prior to calling this interface,
+ * so as to prevent the VFIO group from disposal in the middle of the call.
+ * But it can keep the reference to the VFIO group for several calls into
+ * this interface.
+ * After finishing using of the VFIO group, the caller needs to release the
+ * VFIO group by calling vfio_group_put_external_user().
+ *
+ * @group [in]		: VFIO group
+ * @user_iova_pfn [in]	: array of user/guest IOVA PFNs to be pinned.
+ * @npage [in]		: count of elements in user_iova_pfn array.
+ *			  This count should not be greater
+ *			  VFIO_PIN_PAGES_MAX_ENTRIES.
+ * @prot [in]		: protection flags
+ * @phys_pfn [out]	: array of host PFNs
+ * Return error or number of pages pinned.
+ */
+int vfio_group_pin_pages(struct vfio_group *group,
+			 unsigned long *user_iova_pfn, int npage,
+			 int prot, unsigned long *phys_pfn)
+{
+	struct vfio_container *container;
+	struct vfio_iommu_driver *driver;
+	int ret;
+
+	if (!group || !user_iova_pfn || !phys_pfn || !npage)
+		return -EINVAL;
+
+	if (npage > VFIO_PIN_PAGES_MAX_ENTRIES)
+		return -E2BIG;
+
+	container = group->container;
+	driver = container->iommu_driver;
+	if (likely(driver && driver->ops->pin_pages))
+		ret = driver->ops->pin_pages(container->iommu_data,
+					     user_iova_pfn, npage,
+					     prot, phys_pfn);
+	else
+		ret = -ENOTTY;
+
+	return ret;
+}
+EXPORT_SYMBOL(vfio_group_pin_pages);
+
+/*
+ * Unpin a set of guest IOVA PFNs for a VFIO group.
+ *
+ * The caller needs to call vfio_group_get_external_user() or
+ * vfio_group_get_external_user_from_dev() prior to calling this interface,
+ * so as to prevent the VFIO group from disposal in the middle of the call.
+ * But it can keep the reference to the VFIO group for several calls into
+ * this interface.
+ * After finishing using of the VFIO group, the caller needs to release the
+ * VFIO group by calling vfio_group_put_external_user().
+ *
+ * @group [in]		: vfio group
+ * @user_iova_pfn [in]	: array of user/guest IOVA PFNs to be unpinned.
+ * @npage [in]		: count of elements in user_iova_pfn array.
+ *			  This count should not be greater than
+ *			  VFIO_PIN_PAGES_MAX_ENTRIES.
+ * Return error or number of pages unpinned.
+ */
+int vfio_group_unpin_pages(struct vfio_group *group,
+			   unsigned long *user_iova_pfn, int npage)
+{
+	struct vfio_container *container;
+	struct vfio_iommu_driver *driver;
+	int ret;
+
+	if (!group || !user_iova_pfn || !npage)
+		return -EINVAL;
+
+	if (npage > VFIO_PIN_PAGES_MAX_ENTRIES)
+		return -E2BIG;
+
+	container = group->container;
+	driver = container->iommu_driver;
+	if (likely(driver && driver->ops->unpin_pages))
+		ret = driver->ops->unpin_pages(container->iommu_data,
+					       user_iova_pfn, npage);
+	else
+		ret = -ENOTTY;
+
+	return ret;
+}
+EXPORT_SYMBOL(vfio_group_unpin_pages);
+
+
+/*
+ * This interface allows the CPUs to perform some sort of virtual DMA on
+ * behalf of the device.
+ *
+ * CPUs read/write from/into a range of IOVAs pointing to user space memory
+ * into/from a kernel buffer.
+ *
+ * As the read/write of user space memory is conducted via the CPUs and is
+ * not a real device DMA, it is not necessary to pin the user space memory.
+ *
+ * The caller needs to call vfio_group_get_external_user() or
+ * vfio_group_get_external_user_from_dev() prior to calling this interface,
+ * so as to prevent the VFIO group from disposal in the middle of the call.
+ * But it can keep the reference to the VFIO group for several calls into
+ * this interface.
+ * After finishing using of the VFIO group, the caller needs to release the
+ * VFIO group by calling vfio_group_put_external_user().
+ *
+ * @group [in]		: VFIO group
+ * @user_iova [in]	: base IOVA of a user space buffer
+ * @data [in]		: pointer to kernel buffer
+ * @len [in]		: kernel buffer length
+ * @write		: indicate read or write
+ * Return error code on failure or 0 on success.
+ */
+int vfio_dma_rw(struct vfio_group *group, dma_addr_t user_iova,
+		void *data, size_t len, bool write)
+{
+	struct vfio_container *container;
+	struct vfio_iommu_driver *driver;
+	int ret = 0;
+
+	if (!group || !data || len <= 0)
+		return -EINVAL;
+
+	container = group->container;
+	driver = container->iommu_driver;
+
+	if (likely(driver && driver->ops->dma_rw))
+		ret = driver->ops->dma_rw(container->iommu_data,
+					  user_iova, data, len, write);
+	else
+		ret = -ENOTTY;
+
+	return ret;
+}
+EXPORT_SYMBOL(vfio_dma_rw);
+
 static int vfio_register_iommu_notifier(struct vfio_group *group,
 					unsigned long *events,
 					struct notifier_block *nb)
diff --git a/drivers/vfio/vfio_iommu_type1.c b/drivers/vfio/vfio_iommu_type1.c
index a177bf2..85b32c3 100644
--- a/drivers/vfio/vfio_iommu_type1.c
+++ b/drivers/vfio/vfio_iommu_type1.c
@@ -27,6 +27,7 @@
 #include <linux/iommu.h>
 #include <linux/module.h>
 #include <linux/mm.h>
+#include <linux/mmu_context.h>
 #include <linux/rbtree.h>
 #include <linux/sched/signal.h>
 #include <linux/sched/mm.h>
@@ -1786,7 +1787,7 @@ static int vfio_iommu_type1_attach_group(void *iommu_data,
 
 	if (resv_msi) {
 		ret = iommu_get_msi_cookie(domain->domain, resv_msi_base);
-		if (ret)
+		if (ret && ret != -ENODEV)
 			goto out_detach;
 	}
 
@@ -2305,6 +2306,80 @@ static int vfio_iommu_type1_unregister_notifier(void *iommu_data,
 	return blocking_notifier_chain_unregister(&iommu->notifier, nb);
 }
 
+static int vfio_iommu_type1_dma_rw_chunk(struct vfio_iommu *iommu,
+					 dma_addr_t user_iova, void *data,
+					 size_t count, bool write,
+					 size_t *copied)
+{
+	struct mm_struct *mm;
+	unsigned long vaddr;
+	struct vfio_dma *dma;
+	bool kthread = current->mm == NULL;
+	size_t offset;
+
+	*copied = 0;
+
+	dma = vfio_find_dma(iommu, user_iova, 1);
+	if (!dma)
+		return -EINVAL;
+
+	if ((write && !(dma->prot & IOMMU_WRITE)) ||
+			!(dma->prot & IOMMU_READ))
+		return -EPERM;
+
+	mm = get_task_mm(dma->task);
+
+	if (!mm)
+		return -EPERM;
+
+	if (kthread)
+		use_mm(mm);
+	else if (current->mm != mm)
+		goto out;
+
+	offset = user_iova - dma->iova;
+
+	if (count > dma->size - offset)
+		count = dma->size - offset;
+
+	vaddr = dma->vaddr + offset;
+
+	if (write)
+		*copied = __copy_to_user((void __user *)vaddr, data,
+					 count) ? 0 : count;
+	else
+		*copied = __copy_from_user(data, (void __user *)vaddr,
+					   count) ? 0 : count;
+	if (kthread)
+		unuse_mm(mm);
+out:
+	mmput(mm);
+	return *copied ? 0 : -EFAULT;
+}
+
+static int vfio_iommu_type1_dma_rw(void *iommu_data, dma_addr_t user_iova,
+				   void *data, size_t count, bool write)
+{
+	struct vfio_iommu *iommu = iommu_data;
+	int ret = 0;
+	size_t done;
+
+	mutex_lock(&iommu->lock);
+	while (count > 0) {
+		ret = vfio_iommu_type1_dma_rw_chunk(iommu, user_iova, data,
+						    count, write, &done);
+		if (ret)
+			break;
+
+		count -= done;
+		data += done;
+		user_iova += done;
+	}
+
+	mutex_unlock(&iommu->lock);
+	return ret;
+}
+
 static const struct vfio_iommu_driver_ops vfio_iommu_driver_ops_type1 = {
 	.name			= "vfio-iommu-type1",
 	.owner			= THIS_MODULE,
@@ -2317,6 +2392,7 @@ static const struct vfio_iommu_driver_ops vfio_iommu_driver_ops_type1 = {
 	.unpin_pages		= vfio_iommu_type1_unpin_pages,
 	.register_notifier	= vfio_iommu_type1_register_notifier,
 	.unregister_notifier	= vfio_iommu_type1_unregister_notifier,
+	.dma_rw			= vfio_iommu_type1_dma_rw,
 };
 
 static int __init vfio_iommu_type1_init(void)
diff --git a/drivers/vhost/Kconfig b/drivers/vhost/Kconfig
index 3d03ccb..362b832 100644
--- a/drivers/vhost/Kconfig
+++ b/drivers/vhost/Kconfig
@@ -1,4 +1,29 @@
 # SPDX-License-Identifier: GPL-2.0-only
+config VHOST_IOTLB
+	tristate
+	help
+	  Generic IOTLB implementation for vhost and vringh.
+
+config VHOST_RING
+	tristate
+	select VHOST_IOTLB
+	help
+	  This option is selected by any driver which needs to access
+	  the host side of a virtio ring.
+
+config VHOST
+	tristate
+	select VHOST_IOTLB
+	help
+	  This option is selected by any driver which needs to access
+	  the core of vhost.
+
+menuconfig VHOST_MENU
+	bool "VHOST drivers"
+	default y
+
+if VHOST_MENU
+
 config VHOST_NET
 	tristate "Host kernel accelerator for virtio net"
 	depends on NET && EVENTFD && (TUN || !TUN) && (TAP || !TAP)
@@ -23,8 +48,8 @@
 config VHOST_VSOCK
 	tristate "vhost virtio-vsock driver"
 	depends on VSOCKETS && EVENTFD
-	select VIRTIO_VSOCKETS_COMMON
 	select VHOST
+	select VIRTIO_VSOCKETS_COMMON
 	default n
 	---help---
 	This kernel module can be loaded in the host kernel to provide AF_VSOCK
@@ -34,11 +59,17 @@
 	To compile this driver as a module, choose M here: the module will be called
 	vhost_vsock.
 
-config VHOST
-	tristate
-	---help---
-	  This option is selected by any driver which needs to access
-	  the core of vhost.
+config VHOST_VDPA
+	tristate "Vhost driver for vDPA-based backend"
+	depends on EVENTFD
+	select VHOST
+	select VDPA
+	help
+	  This kernel module can be loaded in host kernel to accelerate
+	  guest virtio devices with the vDPA-based backends.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called vhost_vdpa.
 
 config VHOST_CROSS_ENDIAN_LEGACY
 	bool "Cross-endian support for vhost"
@@ -54,3 +85,5 @@
 	  adds some overhead, it is disabled by default.
 
 	  If unsure, say "N".
+
+endif
diff --git a/drivers/vhost/Kconfig.vringh b/drivers/vhost/Kconfig.vringh
deleted file mode 100644
index c1fe36a..0000000
--- a/drivers/vhost/Kconfig.vringh
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-config VHOST_RING
-	tristate
-	---help---
-	  This option is selected by any driver which needs to access
-	  the host side of a virtio ring.
diff --git a/drivers/vhost/Makefile b/drivers/vhost/Makefile
index 6c6df24..f3e1897 100644
--- a/drivers/vhost/Makefile
+++ b/drivers/vhost/Makefile
@@ -10,4 +10,10 @@
 
 obj-$(CONFIG_VHOST_RING) += vringh.o
 
+obj-$(CONFIG_VHOST_VDPA) += vhost_vdpa.o
+vhost_vdpa-y := vdpa.o
+
 obj-$(CONFIG_VHOST)	+= vhost.o
+
+obj-$(CONFIG_VHOST_IOTLB) += vhost_iotlb.o
+vhost_iotlb-y := iotlb.o
diff --git a/drivers/vhost/iotlb.c b/drivers/vhost/iotlb.c
new file mode 100644
index 0000000..1f0ca6e
--- /dev/null
+++ b/drivers/vhost/iotlb.c
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright (C) 2020 Red Hat, Inc.
+ * Author: Jason Wang <jasowang@redhat.com>
+ *
+ * IOTLB implementation for vhost.
+ */
+#include <linux/slab.h>
+#include <linux/vhost_iotlb.h>
+#include <linux/module.h>
+
+#define MOD_VERSION  "0.1"
+#define MOD_DESC     "VHOST IOTLB"
+#define MOD_AUTHOR   "Jason Wang <jasowang@redhat.com>"
+#define MOD_LICENSE  "GPL v2"
+
+#define START(map) ((map)->start)
+#define LAST(map) ((map)->last)
+
+INTERVAL_TREE_DEFINE(struct vhost_iotlb_map,
+		     rb, __u64, __subtree_last,
+		     START, LAST, static inline, vhost_iotlb_itree);
+
+/**
+ * vhost_iotlb_map_free - remove a map node and free it
+ * @iotlb: the IOTLB
+ * @map: the map that want to be remove and freed
+ */
+void vhost_iotlb_map_free(struct vhost_iotlb *iotlb,
+			  struct vhost_iotlb_map *map)
+{
+	vhost_iotlb_itree_remove(map, &iotlb->root);
+	list_del(&map->link);
+	kfree(map);
+	iotlb->nmaps--;
+}
+EXPORT_SYMBOL_GPL(vhost_iotlb_map_free);
+
+/**
+ * vhost_iotlb_add_range - add a new range to vhost IOTLB
+ * @iotlb: the IOTLB
+ * @start: start of the IOVA range
+ * @last: last of IOVA range
+ * @addr: the address that is mapped to @start
+ * @perm: access permission of this range
+ *
+ * Returns an error last is smaller than start or memory allocation
+ * fails
+ */
+int vhost_iotlb_add_range(struct vhost_iotlb *iotlb,
+			  u64 start, u64 last,
+			  u64 addr, unsigned int perm)
+{
+	struct vhost_iotlb_map *map;
+
+	if (last < start)
+		return -EFAULT;
+
+	if (iotlb->limit &&
+	    iotlb->nmaps == iotlb->limit &&
+	    iotlb->flags & VHOST_IOTLB_FLAG_RETIRE) {
+		map = list_first_entry(&iotlb->list, typeof(*map), link);
+		vhost_iotlb_map_free(iotlb, map);
+	}
+
+	map = kmalloc(sizeof(*map), GFP_ATOMIC);
+	if (!map)
+		return -ENOMEM;
+
+	map->start = start;
+	map->size = last - start + 1;
+	map->last = last;
+	map->addr = addr;
+	map->perm = perm;
+
+	iotlb->nmaps++;
+	vhost_iotlb_itree_insert(map, &iotlb->root);
+
+	INIT_LIST_HEAD(&map->link);
+	list_add_tail(&map->link, &iotlb->list);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(vhost_iotlb_add_range);
+
+/**
+ * vring_iotlb_del_range - delete overlapped ranges from vhost IOTLB
+ * @iotlb: the IOTLB
+ * @start: start of the IOVA range
+ * @last: last of IOVA range
+ */
+void vhost_iotlb_del_range(struct vhost_iotlb *iotlb, u64 start, u64 last)
+{
+	struct vhost_iotlb_map *map;
+
+	while ((map = vhost_iotlb_itree_iter_first(&iotlb->root,
+						   start, last)))
+		vhost_iotlb_map_free(iotlb, map);
+}
+EXPORT_SYMBOL_GPL(vhost_iotlb_del_range);
+
+/**
+ * vhost_iotlb_alloc - add a new vhost IOTLB
+ * @limit: maximum number of IOTLB entries
+ * @flags: VHOST_IOTLB_FLAG_XXX
+ *
+ * Returns an error is memory allocation fails
+ */
+struct vhost_iotlb *vhost_iotlb_alloc(unsigned int limit, unsigned int flags)
+{
+	struct vhost_iotlb *iotlb = kzalloc(sizeof(*iotlb), GFP_KERNEL);
+
+	if (!iotlb)
+		return NULL;
+
+	iotlb->root = RB_ROOT_CACHED;
+	iotlb->limit = limit;
+	iotlb->nmaps = 0;
+	iotlb->flags = flags;
+	INIT_LIST_HEAD(&iotlb->list);
+
+	return iotlb;
+}
+EXPORT_SYMBOL_GPL(vhost_iotlb_alloc);
+
+/**
+ * vhost_iotlb_reset - reset vhost IOTLB (free all IOTLB entries)
+ * @iotlb: the IOTLB to be reset
+ */
+void vhost_iotlb_reset(struct vhost_iotlb *iotlb)
+{
+	vhost_iotlb_del_range(iotlb, 0ULL, 0ULL - 1);
+}
+EXPORT_SYMBOL_GPL(vhost_iotlb_reset);
+
+/**
+ * vhost_iotlb_free - reset and free vhost IOTLB
+ * @iotlb: the IOTLB to be freed
+ */
+void vhost_iotlb_free(struct vhost_iotlb *iotlb)
+{
+	if (iotlb) {
+		vhost_iotlb_reset(iotlb);
+		kfree(iotlb);
+	}
+}
+EXPORT_SYMBOL_GPL(vhost_iotlb_free);
+
+/**
+ * vhost_iotlb_itree_first - return the first overlapped range
+ * @iotlb: the IOTLB
+ * @start: start of IOVA range
+ * @end: end of IOVA range
+ */
+struct vhost_iotlb_map *
+vhost_iotlb_itree_first(struct vhost_iotlb *iotlb, u64 start, u64 last)
+{
+	return vhost_iotlb_itree_iter_first(&iotlb->root, start, last);
+}
+EXPORT_SYMBOL_GPL(vhost_iotlb_itree_first);
+
+/**
+ * vhost_iotlb_itree_first - return the next overlapped range
+ * @iotlb: the IOTLB
+ * @start: start of IOVA range
+ * @end: end of IOVA range
+ */
+struct vhost_iotlb_map *
+vhost_iotlb_itree_next(struct vhost_iotlb_map *map, u64 start, u64 last)
+{
+	return vhost_iotlb_itree_iter_next(map, start, last);
+}
+EXPORT_SYMBOL_GPL(vhost_iotlb_itree_next);
+
+MODULE_VERSION(MOD_VERSION);
+MODULE_DESCRIPTION(MOD_DESC);
+MODULE_AUTHOR(MOD_AUTHOR);
+MODULE_LICENSE(MOD_LICENSE);
diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
index 18e205e..87469d6 100644
--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -1324,7 +1324,8 @@ static int vhost_net_open(struct inode *inode, struct file *f)
 	}
 	vhost_dev_init(dev, vqs, VHOST_NET_VQ_MAX,
 		       UIO_MAXIOV + VHOST_NET_BATCH,
-		       VHOST_NET_PKT_WEIGHT, VHOST_NET_WEIGHT);
+		       VHOST_NET_PKT_WEIGHT, VHOST_NET_WEIGHT,
+		       NULL);
 
 	vhost_poll_init(n->poll + VHOST_NET_VQ_TX, handle_tx_net, EPOLLOUT, dev);
 	vhost_poll_init(n->poll + VHOST_NET_VQ_RX, handle_rx_net, EPOLLIN, dev);
@@ -1586,7 +1587,7 @@ static long vhost_net_reset_owner(struct vhost_net *n)
 	struct socket *tx_sock = NULL;
 	struct socket *rx_sock = NULL;
 	long err;
-	struct vhost_umem *umem;
+	struct vhost_iotlb *umem;
 
 	mutex_lock(&n->dev.mutex);
 	err = vhost_dev_check_owner(&n->dev);
diff --git a/drivers/vhost/scsi.c b/drivers/vhost/scsi.c
index 0b949a1..7653667 100644
--- a/drivers/vhost/scsi.c
+++ b/drivers/vhost/scsi.c
@@ -1628,7 +1628,7 @@ static int vhost_scsi_open(struct inode *inode, struct file *f)
 		vs->vqs[i].vq.handle_kick = vhost_scsi_handle_kick;
 	}
 	vhost_dev_init(&vs->dev, vqs, VHOST_SCSI_MAX_VQ, UIO_MAXIOV,
-		       VHOST_SCSI_WEIGHT, 0);
+		       VHOST_SCSI_WEIGHT, 0, NULL);
 
 	vhost_scsi_init_inflight(vs, NULL);
 
diff --git a/drivers/vhost/vdpa.c b/drivers/vhost/vdpa.c
new file mode 100644
index 0000000..421f02a
--- /dev/null
+++ b/drivers/vhost/vdpa.c
@@ -0,0 +1,883 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018-2020 Intel Corporation.
+ * Copyright (C) 2020 Red Hat, Inc.
+ *
+ * Author: Tiwei Bie <tiwei.bie@intel.com>
+ *         Jason Wang <jasowang@redhat.com>
+ *
+ * Thanks Michael S. Tsirkin for the valuable comments and
+ * suggestions.  And thanks to Cunming Liang and Zhihong Wang for all
+ * their supports.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/cdev.h>
+#include <linux/device.h>
+#include <linux/iommu.h>
+#include <linux/uuid.h>
+#include <linux/vdpa.h>
+#include <linux/nospec.h>
+#include <linux/vhost.h>
+#include <linux/virtio_net.h>
+
+#include "vhost.h"
+
+enum {
+	VHOST_VDPA_FEATURES =
+		(1ULL << VIRTIO_F_NOTIFY_ON_EMPTY) |
+		(1ULL << VIRTIO_F_ANY_LAYOUT) |
+		(1ULL << VIRTIO_F_VERSION_1) |
+		(1ULL << VIRTIO_F_IOMMU_PLATFORM) |
+		(1ULL << VIRTIO_F_RING_PACKED) |
+		(1ULL << VIRTIO_F_ORDER_PLATFORM) |
+		(1ULL << VIRTIO_RING_F_INDIRECT_DESC) |
+		(1ULL << VIRTIO_RING_F_EVENT_IDX),
+
+	VHOST_VDPA_NET_FEATURES = VHOST_VDPA_FEATURES |
+		(1ULL << VIRTIO_NET_F_CSUM) |
+		(1ULL << VIRTIO_NET_F_GUEST_CSUM) |
+		(1ULL << VIRTIO_NET_F_MTU) |
+		(1ULL << VIRTIO_NET_F_MAC) |
+		(1ULL << VIRTIO_NET_F_GUEST_TSO4) |
+		(1ULL << VIRTIO_NET_F_GUEST_TSO6) |
+		(1ULL << VIRTIO_NET_F_GUEST_ECN) |
+		(1ULL << VIRTIO_NET_F_GUEST_UFO) |
+		(1ULL << VIRTIO_NET_F_HOST_TSO4) |
+		(1ULL << VIRTIO_NET_F_HOST_TSO6) |
+		(1ULL << VIRTIO_NET_F_HOST_ECN) |
+		(1ULL << VIRTIO_NET_F_HOST_UFO) |
+		(1ULL << VIRTIO_NET_F_MRG_RXBUF) |
+		(1ULL << VIRTIO_NET_F_STATUS) |
+		(1ULL << VIRTIO_NET_F_SPEED_DUPLEX),
+};
+
+/* Currently, only network backend w/o multiqueue is supported. */
+#define VHOST_VDPA_VQ_MAX	2
+
+#define VHOST_VDPA_DEV_MAX (1U << MINORBITS)
+
+struct vhost_vdpa {
+	struct vhost_dev vdev;
+	struct iommu_domain *domain;
+	struct vhost_virtqueue *vqs;
+	struct completion completion;
+	struct vdpa_device *vdpa;
+	struct device dev;
+	struct cdev cdev;
+	atomic_t opened;
+	int nvqs;
+	int virtio_id;
+	int minor;
+};
+
+static DEFINE_IDA(vhost_vdpa_ida);
+
+static dev_t vhost_vdpa_major;
+
+static const u64 vhost_vdpa_features[] = {
+	[VIRTIO_ID_NET] = VHOST_VDPA_NET_FEATURES,
+};
+
+static void handle_vq_kick(struct vhost_work *work)
+{
+	struct vhost_virtqueue *vq = container_of(work, struct vhost_virtqueue,
+						  poll.work);
+	struct vhost_vdpa *v = container_of(vq->dev, struct vhost_vdpa, vdev);
+	const struct vdpa_config_ops *ops = v->vdpa->config;
+
+	ops->kick_vq(v->vdpa, vq - v->vqs);
+}
+
+static irqreturn_t vhost_vdpa_virtqueue_cb(void *private)
+{
+	struct vhost_virtqueue *vq = private;
+	struct eventfd_ctx *call_ctx = vq->call_ctx;
+
+	if (call_ctx)
+		eventfd_signal(call_ctx, 1);
+
+	return IRQ_HANDLED;
+}
+
+static void vhost_vdpa_reset(struct vhost_vdpa *v)
+{
+	struct vdpa_device *vdpa = v->vdpa;
+	const struct vdpa_config_ops *ops = vdpa->config;
+
+	ops->set_status(vdpa, 0);
+}
+
+static long vhost_vdpa_get_device_id(struct vhost_vdpa *v, u8 __user *argp)
+{
+	struct vdpa_device *vdpa = v->vdpa;
+	const struct vdpa_config_ops *ops = vdpa->config;
+	u32 device_id;
+
+	device_id = ops->get_device_id(vdpa);
+
+	if (copy_to_user(argp, &device_id, sizeof(device_id)))
+		return -EFAULT;
+
+	return 0;
+}
+
+static long vhost_vdpa_get_status(struct vhost_vdpa *v, u8 __user *statusp)
+{
+	struct vdpa_device *vdpa = v->vdpa;
+	const struct vdpa_config_ops *ops = vdpa->config;
+	u8 status;
+
+	status = ops->get_status(vdpa);
+
+	if (copy_to_user(statusp, &status, sizeof(status)))
+		return -EFAULT;
+
+	return 0;
+}
+
+static long vhost_vdpa_set_status(struct vhost_vdpa *v, u8 __user *statusp)
+{
+	struct vdpa_device *vdpa = v->vdpa;
+	const struct vdpa_config_ops *ops = vdpa->config;
+	u8 status;
+
+	if (copy_from_user(&status, statusp, sizeof(status)))
+		return -EFAULT;
+
+	/*
+	 * Userspace shouldn't remove status bits unless reset the
+	 * status to 0.
+	 */
+	if (status != 0 && (ops->get_status(vdpa) & ~status) != 0)
+		return -EINVAL;
+
+	ops->set_status(vdpa, status);
+
+	return 0;
+}
+
+static int vhost_vdpa_config_validate(struct vhost_vdpa *v,
+				      struct vhost_vdpa_config *c)
+{
+	long size = 0;
+
+	switch (v->virtio_id) {
+	case VIRTIO_ID_NET:
+		size = sizeof(struct virtio_net_config);
+		break;
+	}
+
+	if (c->len == 0)
+		return -EINVAL;
+
+	if (c->len > size - c->off)
+		return -E2BIG;
+
+	return 0;
+}
+
+static long vhost_vdpa_get_config(struct vhost_vdpa *v,
+				  struct vhost_vdpa_config __user *c)
+{
+	struct vdpa_device *vdpa = v->vdpa;
+	const struct vdpa_config_ops *ops = vdpa->config;
+	struct vhost_vdpa_config config;
+	unsigned long size = offsetof(struct vhost_vdpa_config, buf);
+	u8 *buf;
+
+	if (copy_from_user(&config, c, size))
+		return -EFAULT;
+	if (vhost_vdpa_config_validate(v, &config))
+		return -EINVAL;
+	buf = kvzalloc(config.len, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	ops->get_config(vdpa, config.off, buf, config.len);
+
+	if (copy_to_user(c->buf, buf, config.len)) {
+		kvfree(buf);
+		return -EFAULT;
+	}
+
+	kvfree(buf);
+	return 0;
+}
+
+static long vhost_vdpa_set_config(struct vhost_vdpa *v,
+				  struct vhost_vdpa_config __user *c)
+{
+	struct vdpa_device *vdpa = v->vdpa;
+	const struct vdpa_config_ops *ops = vdpa->config;
+	struct vhost_vdpa_config config;
+	unsigned long size = offsetof(struct vhost_vdpa_config, buf);
+	u8 *buf;
+
+	if (copy_from_user(&config, c, size))
+		return -EFAULT;
+	if (vhost_vdpa_config_validate(v, &config))
+		return -EINVAL;
+	buf = kvzalloc(config.len, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	if (copy_from_user(buf, c->buf, config.len)) {
+		kvfree(buf);
+		return -EFAULT;
+	}
+
+	ops->set_config(vdpa, config.off, buf, config.len);
+
+	kvfree(buf);
+	return 0;
+}
+
+static long vhost_vdpa_get_features(struct vhost_vdpa *v, u64 __user *featurep)
+{
+	struct vdpa_device *vdpa = v->vdpa;
+	const struct vdpa_config_ops *ops = vdpa->config;
+	u64 features;
+
+	features = ops->get_features(vdpa);
+	features &= vhost_vdpa_features[v->virtio_id];
+
+	if (copy_to_user(featurep, &features, sizeof(features)))
+		return -EFAULT;
+
+	return 0;
+}
+
+static long vhost_vdpa_set_features(struct vhost_vdpa *v, u64 __user *featurep)
+{
+	struct vdpa_device *vdpa = v->vdpa;
+	const struct vdpa_config_ops *ops = vdpa->config;
+	u64 features;
+
+	/*
+	 * It's not allowed to change the features after they have
+	 * been negotiated.
+	 */
+	if (ops->get_status(vdpa) & VIRTIO_CONFIG_S_FEATURES_OK)
+		return -EBUSY;
+
+	if (copy_from_user(&features, featurep, sizeof(features)))
+		return -EFAULT;
+
+	if (features & ~vhost_vdpa_features[v->virtio_id])
+		return -EINVAL;
+
+	if (ops->set_features(vdpa, features))
+		return -EINVAL;
+
+	return 0;
+}
+
+static long vhost_vdpa_get_vring_num(struct vhost_vdpa *v, u16 __user *argp)
+{
+	struct vdpa_device *vdpa = v->vdpa;
+	const struct vdpa_config_ops *ops = vdpa->config;
+	u16 num;
+
+	num = ops->get_vq_num_max(vdpa);
+
+	if (copy_to_user(argp, &num, sizeof(num)))
+		return -EFAULT;
+
+	return 0;
+}
+
+static long vhost_vdpa_vring_ioctl(struct vhost_vdpa *v, unsigned int cmd,
+				   void __user *argp)
+{
+	struct vdpa_device *vdpa = v->vdpa;
+	const struct vdpa_config_ops *ops = vdpa->config;
+	struct vdpa_callback cb;
+	struct vhost_virtqueue *vq;
+	struct vhost_vring_state s;
+	u8 status;
+	u32 idx;
+	long r;
+
+	r = get_user(idx, (u32 __user *)argp);
+	if (r < 0)
+		return r;
+
+	if (idx >= v->nvqs)
+		return -ENOBUFS;
+
+	idx = array_index_nospec(idx, v->nvqs);
+	vq = &v->vqs[idx];
+
+	status = ops->get_status(vdpa);
+
+	if (cmd == VHOST_VDPA_SET_VRING_ENABLE) {
+		if (copy_from_user(&s, argp, sizeof(s)))
+			return -EFAULT;
+		ops->set_vq_ready(vdpa, idx, s.num);
+		return 0;
+	}
+
+	if (cmd == VHOST_GET_VRING_BASE)
+		vq->last_avail_idx = ops->get_vq_state(v->vdpa, idx);
+
+	r = vhost_vring_ioctl(&v->vdev, cmd, argp);
+	if (r)
+		return r;
+
+	switch (cmd) {
+	case VHOST_SET_VRING_ADDR:
+		if (ops->set_vq_address(vdpa, idx,
+					(u64)(uintptr_t)vq->desc,
+					(u64)(uintptr_t)vq->avail,
+					(u64)(uintptr_t)vq->used))
+			r = -EINVAL;
+		break;
+
+	case VHOST_SET_VRING_BASE:
+		if (ops->set_vq_state(vdpa, idx, vq->last_avail_idx))
+			r = -EINVAL;
+		break;
+
+	case VHOST_SET_VRING_CALL:
+		if (vq->call_ctx) {
+			cb.callback = vhost_vdpa_virtqueue_cb;
+			cb.private = vq;
+		} else {
+			cb.callback = NULL;
+			cb.private = NULL;
+		}
+		ops->set_vq_cb(vdpa, idx, &cb);
+		break;
+
+	case VHOST_SET_VRING_NUM:
+		ops->set_vq_num(vdpa, idx, vq->num);
+		break;
+	}
+
+	return r;
+}
+
+static long vhost_vdpa_unlocked_ioctl(struct file *filep,
+				      unsigned int cmd, unsigned long arg)
+{
+	struct vhost_vdpa *v = filep->private_data;
+	struct vhost_dev *d = &v->vdev;
+	void __user *argp = (void __user *)arg;
+	long r;
+
+	mutex_lock(&d->mutex);
+
+	switch (cmd) {
+	case VHOST_VDPA_GET_DEVICE_ID:
+		r = vhost_vdpa_get_device_id(v, argp);
+		break;
+	case VHOST_VDPA_GET_STATUS:
+		r = vhost_vdpa_get_status(v, argp);
+		break;
+	case VHOST_VDPA_SET_STATUS:
+		r = vhost_vdpa_set_status(v, argp);
+		break;
+	case VHOST_VDPA_GET_CONFIG:
+		r = vhost_vdpa_get_config(v, argp);
+		break;
+	case VHOST_VDPA_SET_CONFIG:
+		r = vhost_vdpa_set_config(v, argp);
+		break;
+	case VHOST_GET_FEATURES:
+		r = vhost_vdpa_get_features(v, argp);
+		break;
+	case VHOST_SET_FEATURES:
+		r = vhost_vdpa_set_features(v, argp);
+		break;
+	case VHOST_VDPA_GET_VRING_NUM:
+		r = vhost_vdpa_get_vring_num(v, argp);
+		break;
+	case VHOST_SET_LOG_BASE:
+	case VHOST_SET_LOG_FD:
+		r = -ENOIOCTLCMD;
+		break;
+	default:
+		r = vhost_dev_ioctl(&v->vdev, cmd, argp);
+		if (r == -ENOIOCTLCMD)
+			r = vhost_vdpa_vring_ioctl(v, cmd, argp);
+		break;
+	}
+
+	mutex_unlock(&d->mutex);
+	return r;
+}
+
+static void vhost_vdpa_iotlb_unmap(struct vhost_vdpa *v, u64 start, u64 last)
+{
+	struct vhost_dev *dev = &v->vdev;
+	struct vhost_iotlb *iotlb = dev->iotlb;
+	struct vhost_iotlb_map *map;
+	struct page *page;
+	unsigned long pfn, pinned;
+
+	while ((map = vhost_iotlb_itree_first(iotlb, start, last)) != NULL) {
+		pinned = map->size >> PAGE_SHIFT;
+		for (pfn = map->addr >> PAGE_SHIFT;
+		     pinned > 0; pfn++, pinned--) {
+			page = pfn_to_page(pfn);
+			if (map->perm & VHOST_ACCESS_WO)
+				set_page_dirty_lock(page);
+			unpin_user_page(page);
+		}
+		atomic64_sub(map->size >> PAGE_SHIFT, &dev->mm->pinned_vm);
+		vhost_iotlb_map_free(iotlb, map);
+	}
+}
+
+static void vhost_vdpa_iotlb_free(struct vhost_vdpa *v)
+{
+	struct vhost_dev *dev = &v->vdev;
+
+	vhost_vdpa_iotlb_unmap(v, 0ULL, 0ULL - 1);
+	kfree(dev->iotlb);
+	dev->iotlb = NULL;
+}
+
+static int perm_to_iommu_flags(u32 perm)
+{
+	int flags = 0;
+
+	switch (perm) {
+	case VHOST_ACCESS_WO:
+		flags |= IOMMU_WRITE;
+		break;
+	case VHOST_ACCESS_RO:
+		flags |= IOMMU_READ;
+		break;
+	case VHOST_ACCESS_RW:
+		flags |= (IOMMU_WRITE | IOMMU_READ);
+		break;
+	default:
+		WARN(1, "invalidate vhost IOTLB permission\n");
+		break;
+	}
+
+	return flags | IOMMU_CACHE;
+}
+
+static int vhost_vdpa_map(struct vhost_vdpa *v,
+			  u64 iova, u64 size, u64 pa, u32 perm)
+{
+	struct vhost_dev *dev = &v->vdev;
+	struct vdpa_device *vdpa = v->vdpa;
+	const struct vdpa_config_ops *ops = vdpa->config;
+	int r = 0;
+
+	r = vhost_iotlb_add_range(dev->iotlb, iova, iova + size - 1,
+				  pa, perm);
+	if (r)
+		return r;
+
+	if (ops->dma_map)
+		r = ops->dma_map(vdpa, iova, size, pa, perm);
+	else if (ops->set_map)
+		r = ops->set_map(vdpa, dev->iotlb);
+	else
+		r = iommu_map(v->domain, iova, pa, size,
+			      perm_to_iommu_flags(perm));
+
+	return r;
+}
+
+static void vhost_vdpa_unmap(struct vhost_vdpa *v, u64 iova, u64 size)
+{
+	struct vhost_dev *dev = &v->vdev;
+	struct vdpa_device *vdpa = v->vdpa;
+	const struct vdpa_config_ops *ops = vdpa->config;
+
+	vhost_vdpa_iotlb_unmap(v, iova, iova + size - 1);
+
+	if (ops->dma_map)
+		ops->dma_unmap(vdpa, iova, size);
+	else if (ops->set_map)
+		ops->set_map(vdpa, dev->iotlb);
+	else
+		iommu_unmap(v->domain, iova, size);
+}
+
+static int vhost_vdpa_process_iotlb_update(struct vhost_vdpa *v,
+					   struct vhost_iotlb_msg *msg)
+{
+	struct vhost_dev *dev = &v->vdev;
+	struct vhost_iotlb *iotlb = dev->iotlb;
+	struct page **page_list;
+	unsigned long list_size = PAGE_SIZE / sizeof(struct page *);
+	unsigned int gup_flags = FOLL_LONGTERM;
+	unsigned long npages, cur_base, map_pfn, last_pfn = 0;
+	unsigned long locked, lock_limit, pinned, i;
+	u64 iova = msg->iova;
+	int ret = 0;
+
+	if (vhost_iotlb_itree_first(iotlb, msg->iova,
+				    msg->iova + msg->size - 1))
+		return -EEXIST;
+
+	page_list = (struct page **) __get_free_page(GFP_KERNEL);
+	if (!page_list)
+		return -ENOMEM;
+
+	if (msg->perm & VHOST_ACCESS_WO)
+		gup_flags |= FOLL_WRITE;
+
+	npages = PAGE_ALIGN(msg->size + (iova & ~PAGE_MASK)) >> PAGE_SHIFT;
+	if (!npages)
+		return -EINVAL;
+
+	down_read(&dev->mm->mmap_sem);
+
+	locked = atomic64_add_return(npages, &dev->mm->pinned_vm);
+	lock_limit = rlimit(RLIMIT_MEMLOCK) >> PAGE_SHIFT;
+
+	if (locked > lock_limit) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	cur_base = msg->uaddr & PAGE_MASK;
+	iova &= PAGE_MASK;
+
+	while (npages) {
+		pinned = min_t(unsigned long, npages, list_size);
+		ret = pin_user_pages(cur_base, pinned,
+				     gup_flags, page_list, NULL);
+		if (ret != pinned)
+			goto out;
+
+		if (!last_pfn)
+			map_pfn = page_to_pfn(page_list[0]);
+
+		for (i = 0; i < ret; i++) {
+			unsigned long this_pfn = page_to_pfn(page_list[i]);
+			u64 csize;
+
+			if (last_pfn && (this_pfn != last_pfn + 1)) {
+				/* Pin a contiguous chunk of memory */
+				csize = (last_pfn - map_pfn + 1) << PAGE_SHIFT;
+				if (vhost_vdpa_map(v, iova, csize,
+						   map_pfn << PAGE_SHIFT,
+						   msg->perm))
+					goto out;
+				map_pfn = this_pfn;
+				iova += csize;
+			}
+
+			last_pfn = this_pfn;
+		}
+
+		cur_base += ret << PAGE_SHIFT;
+		npages -= ret;
+	}
+
+	/* Pin the rest chunk */
+	ret = vhost_vdpa_map(v, iova, (last_pfn - map_pfn + 1) << PAGE_SHIFT,
+			     map_pfn << PAGE_SHIFT, msg->perm);
+out:
+	if (ret) {
+		vhost_vdpa_unmap(v, msg->iova, msg->size);
+		atomic64_sub(npages, &dev->mm->pinned_vm);
+	}
+	up_read(&dev->mm->mmap_sem);
+	free_page((unsigned long)page_list);
+	return ret;
+}
+
+static int vhost_vdpa_process_iotlb_msg(struct vhost_dev *dev,
+					struct vhost_iotlb_msg *msg)
+{
+	struct vhost_vdpa *v = container_of(dev, struct vhost_vdpa, vdev);
+	int r = 0;
+
+	r = vhost_dev_check_owner(dev);
+	if (r)
+		return r;
+
+	switch (msg->type) {
+	case VHOST_IOTLB_UPDATE:
+		r = vhost_vdpa_process_iotlb_update(v, msg);
+		break;
+	case VHOST_IOTLB_INVALIDATE:
+		vhost_vdpa_unmap(v, msg->iova, msg->size);
+		break;
+	default:
+		r = -EINVAL;
+		break;
+	}
+
+	return r;
+}
+
+static ssize_t vhost_vdpa_chr_write_iter(struct kiocb *iocb,
+					 struct iov_iter *from)
+{
+	struct file *file = iocb->ki_filp;
+	struct vhost_vdpa *v = file->private_data;
+	struct vhost_dev *dev = &v->vdev;
+
+	return vhost_chr_write_iter(dev, from);
+}
+
+static int vhost_vdpa_alloc_domain(struct vhost_vdpa *v)
+{
+	struct vdpa_device *vdpa = v->vdpa;
+	const struct vdpa_config_ops *ops = vdpa->config;
+	struct device *dma_dev = vdpa_get_dma_dev(vdpa);
+	struct bus_type *bus;
+	int ret;
+
+	/* Device want to do DMA by itself */
+	if (ops->set_map || ops->dma_map)
+		return 0;
+
+	bus = dma_dev->bus;
+	if (!bus)
+		return -EFAULT;
+
+	if (!iommu_capable(bus, IOMMU_CAP_CACHE_COHERENCY))
+		return -ENOTSUPP;
+
+	v->domain = iommu_domain_alloc(bus);
+	if (!v->domain)
+		return -EIO;
+
+	ret = iommu_attach_device(v->domain, dma_dev);
+	if (ret)
+		goto err_attach;
+
+	return 0;
+
+err_attach:
+	iommu_domain_free(v->domain);
+	return ret;
+}
+
+static void vhost_vdpa_free_domain(struct vhost_vdpa *v)
+{
+	struct vdpa_device *vdpa = v->vdpa;
+	struct device *dma_dev = vdpa_get_dma_dev(vdpa);
+
+	if (v->domain) {
+		iommu_detach_device(v->domain, dma_dev);
+		iommu_domain_free(v->domain);
+	}
+
+	v->domain = NULL;
+}
+
+static int vhost_vdpa_open(struct inode *inode, struct file *filep)
+{
+	struct vhost_vdpa *v;
+	struct vhost_dev *dev;
+	struct vhost_virtqueue **vqs;
+	int nvqs, i, r, opened;
+
+	v = container_of(inode->i_cdev, struct vhost_vdpa, cdev);
+	if (!v)
+		return -ENODEV;
+
+	opened = atomic_cmpxchg(&v->opened, 0, 1);
+	if (opened)
+		return -EBUSY;
+
+	nvqs = v->nvqs;
+	vhost_vdpa_reset(v);
+
+	vqs = kmalloc_array(nvqs, sizeof(*vqs), GFP_KERNEL);
+	if (!vqs) {
+		r = -ENOMEM;
+		goto err;
+	}
+
+	dev = &v->vdev;
+	for (i = 0; i < nvqs; i++) {
+		vqs[i] = &v->vqs[i];
+		vqs[i]->handle_kick = handle_vq_kick;
+	}
+	vhost_dev_init(dev, vqs, nvqs, 0, 0, 0,
+		       vhost_vdpa_process_iotlb_msg);
+
+	dev->iotlb = vhost_iotlb_alloc(0, 0);
+	if (!dev->iotlb) {
+		r = -ENOMEM;
+		goto err_init_iotlb;
+	}
+
+	r = vhost_vdpa_alloc_domain(v);
+	if (r)
+		goto err_init_iotlb;
+
+	filep->private_data = v;
+
+	return 0;
+
+err_init_iotlb:
+	vhost_dev_cleanup(&v->vdev);
+err:
+	atomic_dec(&v->opened);
+	return r;
+}
+
+static int vhost_vdpa_release(struct inode *inode, struct file *filep)
+{
+	struct vhost_vdpa *v = filep->private_data;
+	struct vhost_dev *d = &v->vdev;
+
+	mutex_lock(&d->mutex);
+	filep->private_data = NULL;
+	vhost_vdpa_reset(v);
+	vhost_dev_stop(&v->vdev);
+	vhost_vdpa_iotlb_free(v);
+	vhost_vdpa_free_domain(v);
+	vhost_dev_cleanup(&v->vdev);
+	kfree(v->vdev.vqs);
+	mutex_unlock(&d->mutex);
+
+	atomic_dec(&v->opened);
+	complete(&v->completion);
+
+	return 0;
+}
+
+static const struct file_operations vhost_vdpa_fops = {
+	.owner		= THIS_MODULE,
+	.open		= vhost_vdpa_open,
+	.release	= vhost_vdpa_release,
+	.write_iter	= vhost_vdpa_chr_write_iter,
+	.unlocked_ioctl	= vhost_vdpa_unlocked_ioctl,
+	.compat_ioctl	= compat_ptr_ioctl,
+};
+
+static void vhost_vdpa_release_dev(struct device *device)
+{
+	struct vhost_vdpa *v =
+	       container_of(device, struct vhost_vdpa, dev);
+
+	ida_simple_remove(&vhost_vdpa_ida, v->minor);
+	kfree(v->vqs);
+	kfree(v);
+}
+
+static int vhost_vdpa_probe(struct vdpa_device *vdpa)
+{
+	const struct vdpa_config_ops *ops = vdpa->config;
+	struct vhost_vdpa *v;
+	int minor, nvqs = VHOST_VDPA_VQ_MAX;
+	int r;
+
+	/* Currently, we only accept the network devices. */
+	if (ops->get_device_id(vdpa) != VIRTIO_ID_NET)
+		return -ENOTSUPP;
+
+	v = kzalloc(sizeof(*v), GFP_KERNEL | __GFP_RETRY_MAYFAIL);
+	if (!v)
+		return -ENOMEM;
+
+	minor = ida_simple_get(&vhost_vdpa_ida, 0,
+			       VHOST_VDPA_DEV_MAX, GFP_KERNEL);
+	if (minor < 0) {
+		kfree(v);
+		return minor;
+	}
+
+	atomic_set(&v->opened, 0);
+	v->minor = minor;
+	v->vdpa = vdpa;
+	v->nvqs = nvqs;
+	v->virtio_id = ops->get_device_id(vdpa);
+
+	device_initialize(&v->dev);
+	v->dev.release = vhost_vdpa_release_dev;
+	v->dev.parent = &vdpa->dev;
+	v->dev.devt = MKDEV(MAJOR(vhost_vdpa_major), minor);
+	v->vqs = kmalloc_array(nvqs, sizeof(struct vhost_virtqueue),
+			       GFP_KERNEL);
+	if (!v->vqs) {
+		r = -ENOMEM;
+		goto err;
+	}
+
+	r = dev_set_name(&v->dev, "vhost-vdpa-%u", minor);
+	if (r)
+		goto err;
+
+	cdev_init(&v->cdev, &vhost_vdpa_fops);
+	v->cdev.owner = THIS_MODULE;
+
+	r = cdev_device_add(&v->cdev, &v->dev);
+	if (r)
+		goto err;
+
+	init_completion(&v->completion);
+	vdpa_set_drvdata(vdpa, v);
+
+	return 0;
+
+err:
+	put_device(&v->dev);
+	return r;
+}
+
+static void vhost_vdpa_remove(struct vdpa_device *vdpa)
+{
+	struct vhost_vdpa *v = vdpa_get_drvdata(vdpa);
+	int opened;
+
+	cdev_device_del(&v->cdev, &v->dev);
+
+	do {
+		opened = atomic_cmpxchg(&v->opened, 0, 1);
+		if (!opened)
+			break;
+		wait_for_completion(&v->completion);
+	} while (1);
+
+	put_device(&v->dev);
+}
+
+static struct vdpa_driver vhost_vdpa_driver = {
+	.driver = {
+		.name	= "vhost_vdpa",
+	},
+	.probe	= vhost_vdpa_probe,
+	.remove	= vhost_vdpa_remove,
+};
+
+static int __init vhost_vdpa_init(void)
+{
+	int r;
+
+	r = alloc_chrdev_region(&vhost_vdpa_major, 0, VHOST_VDPA_DEV_MAX,
+				"vhost-vdpa");
+	if (r)
+		goto err_alloc_chrdev;
+
+	r = vdpa_register_driver(&vhost_vdpa_driver);
+	if (r)
+		goto err_vdpa_register_driver;
+
+	return 0;
+
+err_vdpa_register_driver:
+	unregister_chrdev_region(vhost_vdpa_major, VHOST_VDPA_DEV_MAX);
+err_alloc_chrdev:
+	return r;
+}
+module_init(vhost_vdpa_init);
+
+static void __exit vhost_vdpa_exit(void)
+{
+	vdpa_unregister_driver(&vhost_vdpa_driver);
+	unregister_chrdev_region(vhost_vdpa_major, VHOST_VDPA_DEV_MAX);
+}
+module_exit(vhost_vdpa_exit);
+
+MODULE_VERSION("0.0.1");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Intel Corporation");
+MODULE_DESCRIPTION("vDPA-based vhost backend for virtio");
diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
index f44340b..d450e16 100644
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -50,10 +50,6 @@ enum {
 #define vhost_used_event(vq) ((__virtio16 __user *)&vq->avail->ring[vq->num])
 #define vhost_avail_event(vq) ((__virtio16 __user *)&vq->used->ring[vq->num])
 
-INTERVAL_TREE_DEFINE(struct vhost_umem_node,
-		     rb, __u64, __subtree_last,
-		     START, LAST, static inline, vhost_umem_interval_tree);
-
 #ifdef CONFIG_VHOST_CROSS_ENDIAN_LEGACY
 static void vhost_disable_cross_endian(struct vhost_virtqueue *vq)
 {
@@ -457,7 +453,9 @@ static size_t vhost_get_desc_size(struct vhost_virtqueue *vq,
 
 void vhost_dev_init(struct vhost_dev *dev,
 		    struct vhost_virtqueue **vqs, int nvqs,
-		    int iov_limit, int weight, int byte_weight)
+		    int iov_limit, int weight, int byte_weight,
+		    int (*msg_handler)(struct vhost_dev *dev,
+				       struct vhost_iotlb_msg *msg))
 {
 	struct vhost_virtqueue *vq;
 	int i;
@@ -473,6 +471,7 @@ void vhost_dev_init(struct vhost_dev *dev,
 	dev->iov_limit = iov_limit;
 	dev->weight = weight;
 	dev->byte_weight = byte_weight;
+	dev->msg_handler = msg_handler;
 	init_llist_head(&dev->work_list);
 	init_waitqueue_head(&dev->wait);
 	INIT_LIST_HEAD(&dev->read_list);
@@ -581,21 +580,25 @@ long vhost_dev_set_owner(struct vhost_dev *dev)
 }
 EXPORT_SYMBOL_GPL(vhost_dev_set_owner);
 
-struct vhost_umem *vhost_dev_reset_owner_prepare(void)
+static struct vhost_iotlb *iotlb_alloc(void)
 {
-	return kvzalloc(sizeof(struct vhost_umem), GFP_KERNEL);
+	return vhost_iotlb_alloc(max_iotlb_entries,
+				 VHOST_IOTLB_FLAG_RETIRE);
+}
+
+struct vhost_iotlb *vhost_dev_reset_owner_prepare(void)
+{
+	return iotlb_alloc();
 }
 EXPORT_SYMBOL_GPL(vhost_dev_reset_owner_prepare);
 
 /* Caller should have device mutex */
-void vhost_dev_reset_owner(struct vhost_dev *dev, struct vhost_umem *umem)
+void vhost_dev_reset_owner(struct vhost_dev *dev, struct vhost_iotlb *umem)
 {
 	int i;
 
 	vhost_dev_cleanup(dev);
 
-	/* Restore memory to default empty mapping. */
-	INIT_LIST_HEAD(&umem->umem_list);
 	dev->umem = umem;
 	/* We don't need VQ locks below since vhost_dev_cleanup makes sure
 	 * VQs aren't running.
@@ -618,28 +621,6 @@ void vhost_dev_stop(struct vhost_dev *dev)
 }
 EXPORT_SYMBOL_GPL(vhost_dev_stop);
 
-static void vhost_umem_free(struct vhost_umem *umem,
-			    struct vhost_umem_node *node)
-{
-	vhost_umem_interval_tree_remove(node, &umem->umem_tree);
-	list_del(&node->link);
-	kfree(node);
-	umem->numem--;
-}
-
-static void vhost_umem_clean(struct vhost_umem *umem)
-{
-	struct vhost_umem_node *node, *tmp;
-
-	if (!umem)
-		return;
-
-	list_for_each_entry_safe(node, tmp, &umem->umem_list, link)
-		vhost_umem_free(umem, node);
-
-	kvfree(umem);
-}
-
 static void vhost_clear_msg(struct vhost_dev *dev)
 {
 	struct vhost_msg_node *node, *n;
@@ -677,9 +658,9 @@ void vhost_dev_cleanup(struct vhost_dev *dev)
 		eventfd_ctx_put(dev->log_ctx);
 	dev->log_ctx = NULL;
 	/* No one will access memory at this point */
-	vhost_umem_clean(dev->umem);
+	vhost_iotlb_free(dev->umem);
 	dev->umem = NULL;
-	vhost_umem_clean(dev->iotlb);
+	vhost_iotlb_free(dev->iotlb);
 	dev->iotlb = NULL;
 	vhost_clear_msg(dev);
 	wake_up_interruptible_poll(&dev->wait, EPOLLIN | EPOLLRDNORM);
@@ -715,27 +696,26 @@ static bool vhost_overflow(u64 uaddr, u64 size)
 }
 
 /* Caller should have vq mutex and device mutex. */
-static bool vq_memory_access_ok(void __user *log_base, struct vhost_umem *umem,
+static bool vq_memory_access_ok(void __user *log_base, struct vhost_iotlb *umem,
 				int log_all)
 {
-	struct vhost_umem_node *node;
+	struct vhost_iotlb_map *map;
 
 	if (!umem)
 		return false;
 
-	list_for_each_entry(node, &umem->umem_list, link) {
-		unsigned long a = node->userspace_addr;
+	list_for_each_entry(map, &umem->list, link) {
+		unsigned long a = map->addr;
 
-		if (vhost_overflow(node->userspace_addr, node->size))
+		if (vhost_overflow(map->addr, map->size))
 			return false;
 
 
-		if (!access_ok((void __user *)a,
-				    node->size))
+		if (!access_ok((void __user *)a, map->size))
 			return false;
 		else if (log_all && !log_access_ok(log_base,
-						   node->start,
-						   node->size))
+						   map->start,
+						   map->size))
 			return false;
 	}
 	return true;
@@ -745,17 +725,17 @@ static inline void __user *vhost_vq_meta_fetch(struct vhost_virtqueue *vq,
 					       u64 addr, unsigned int size,
 					       int type)
 {
-	const struct vhost_umem_node *node = vq->meta_iotlb[type];
+	const struct vhost_iotlb_map *map = vq->meta_iotlb[type];
 
-	if (!node)
+	if (!map)
 		return NULL;
 
-	return (void *)(uintptr_t)(node->userspace_addr + addr - node->start);
+	return (void *)(uintptr_t)(map->addr + addr - map->start);
 }
 
 /* Can we switch to this memory table? */
 /* Caller should have device mutex but not vq mutex */
-static bool memory_access_ok(struct vhost_dev *d, struct vhost_umem *umem,
+static bool memory_access_ok(struct vhost_dev *d, struct vhost_iotlb *umem,
 			     int log_all)
 {
 	int i;
@@ -1020,47 +1000,6 @@ static inline int vhost_get_desc(struct vhost_virtqueue *vq,
 	return vhost_copy_from_user(vq, desc, vq->desc + idx, sizeof(*desc));
 }
 
-static int vhost_new_umem_range(struct vhost_umem *umem,
-				u64 start, u64 size, u64 end,
-				u64 userspace_addr, int perm)
-{
-	struct vhost_umem_node *tmp, *node;
-
-	if (!size)
-		return -EFAULT;
-
-	node = kmalloc(sizeof(*node), GFP_ATOMIC);
-	if (!node)
-		return -ENOMEM;
-
-	if (umem->numem == max_iotlb_entries) {
-		tmp = list_first_entry(&umem->umem_list, typeof(*tmp), link);
-		vhost_umem_free(umem, tmp);
-	}
-
-	node->start = start;
-	node->size = size;
-	node->last = end;
-	node->userspace_addr = userspace_addr;
-	node->perm = perm;
-	INIT_LIST_HEAD(&node->link);
-	list_add_tail(&node->link, &umem->umem_list);
-	vhost_umem_interval_tree_insert(node, &umem->umem_tree);
-	umem->numem++;
-
-	return 0;
-}
-
-static void vhost_del_umem_range(struct vhost_umem *umem,
-				 u64 start, u64 end)
-{
-	struct vhost_umem_node *node;
-
-	while ((node = vhost_umem_interval_tree_iter_first(&umem->umem_tree,
-							   start, end)))
-		vhost_umem_free(umem, node);
-}
-
 static void vhost_iotlb_notify_vq(struct vhost_dev *d,
 				  struct vhost_iotlb_msg *msg)
 {
@@ -1117,9 +1056,9 @@ static int vhost_process_iotlb_msg(struct vhost_dev *dev,
 			break;
 		}
 		vhost_vq_meta_reset(dev);
-		if (vhost_new_umem_range(dev->iotlb, msg->iova, msg->size,
-					 msg->iova + msg->size - 1,
-					 msg->uaddr, msg->perm)) {
+		if (vhost_iotlb_add_range(dev->iotlb, msg->iova,
+					  msg->iova + msg->size - 1,
+					  msg->uaddr, msg->perm)) {
 			ret = -ENOMEM;
 			break;
 		}
@@ -1131,8 +1070,8 @@ static int vhost_process_iotlb_msg(struct vhost_dev *dev,
 			break;
 		}
 		vhost_vq_meta_reset(dev);
-		vhost_del_umem_range(dev->iotlb, msg->iova,
-				     msg->iova + msg->size - 1);
+		vhost_iotlb_del_range(dev->iotlb, msg->iova,
+				      msg->iova + msg->size - 1);
 		break;
 	default:
 		ret = -EINVAL;
@@ -1178,7 +1117,12 @@ ssize_t vhost_chr_write_iter(struct vhost_dev *dev,
 		ret = -EINVAL;
 		goto done;
 	}
-	if (vhost_process_iotlb_msg(dev, &msg)) {
+
+	if (dev->msg_handler)
+		ret = dev->msg_handler(dev, &msg);
+	else
+		ret = vhost_process_iotlb_msg(dev, &msg);
+	if (ret) {
 		ret = -EFAULT;
 		goto done;
 	}
@@ -1311,44 +1255,42 @@ static bool vq_access_ok(struct vhost_virtqueue *vq, unsigned int num,
 }
 
 static void vhost_vq_meta_update(struct vhost_virtqueue *vq,
-				 const struct vhost_umem_node *node,
+				 const struct vhost_iotlb_map *map,
 				 int type)
 {
 	int access = (type == VHOST_ADDR_USED) ?
 		     VHOST_ACCESS_WO : VHOST_ACCESS_RO;
 
-	if (likely(node->perm & access))
-		vq->meta_iotlb[type] = node;
+	if (likely(map->perm & access))
+		vq->meta_iotlb[type] = map;
 }
 
 static bool iotlb_access_ok(struct vhost_virtqueue *vq,
 			    int access, u64 addr, u64 len, int type)
 {
-	const struct vhost_umem_node *node;
-	struct vhost_umem *umem = vq->iotlb;
+	const struct vhost_iotlb_map *map;
+	struct vhost_iotlb *umem = vq->iotlb;
 	u64 s = 0, size, orig_addr = addr, last = addr + len - 1;
 
 	if (vhost_vq_meta_fetch(vq, addr, len, type))
 		return true;
 
 	while (len > s) {
-		node = vhost_umem_interval_tree_iter_first(&umem->umem_tree,
-							   addr,
-							   last);
-		if (node == NULL || node->start > addr) {
+		map = vhost_iotlb_itree_first(umem, addr, last);
+		if (map == NULL || map->start > addr) {
 			vhost_iotlb_miss(vq, addr, access);
 			return false;
-		} else if (!(node->perm & access)) {
+		} else if (!(map->perm & access)) {
 			/* Report the possible access violation by
 			 * request another translation from userspace.
 			 */
 			return false;
 		}
 
-		size = node->size - addr + node->start;
+		size = map->size - addr + map->start;
 
 		if (orig_addr == addr && size >= len)
-			vhost_vq_meta_update(vq, node, type);
+			vhost_vq_meta_update(vq, map, type);
 
 		s += size;
 		addr += size;
@@ -1364,12 +1306,12 @@ int vq_meta_prefetch(struct vhost_virtqueue *vq)
 	if (!vq->iotlb)
 		return 1;
 
-	return iotlb_access_ok(vq, VHOST_ACCESS_RO, (u64)(uintptr_t)vq->desc,
+	return iotlb_access_ok(vq, VHOST_MAP_RO, (u64)(uintptr_t)vq->desc,
 			       vhost_get_desc_size(vq, num), VHOST_ADDR_DESC) &&
-	       iotlb_access_ok(vq, VHOST_ACCESS_RO, (u64)(uintptr_t)vq->avail,
+	       iotlb_access_ok(vq, VHOST_MAP_RO, (u64)(uintptr_t)vq->avail,
 			       vhost_get_avail_size(vq, num),
 			       VHOST_ADDR_AVAIL) &&
-	       iotlb_access_ok(vq, VHOST_ACCESS_WO, (u64)(uintptr_t)vq->used,
+	       iotlb_access_ok(vq, VHOST_MAP_WO, (u64)(uintptr_t)vq->used,
 			       vhost_get_used_size(vq, num), VHOST_ADDR_USED);
 }
 EXPORT_SYMBOL_GPL(vq_meta_prefetch);
@@ -1408,25 +1350,11 @@ bool vhost_vq_access_ok(struct vhost_virtqueue *vq)
 }
 EXPORT_SYMBOL_GPL(vhost_vq_access_ok);
 
-static struct vhost_umem *vhost_umem_alloc(void)
-{
-	struct vhost_umem *umem = kvzalloc(sizeof(*umem), GFP_KERNEL);
-
-	if (!umem)
-		return NULL;
-
-	umem->umem_tree = RB_ROOT_CACHED;
-	umem->numem = 0;
-	INIT_LIST_HEAD(&umem->umem_list);
-
-	return umem;
-}
-
 static long vhost_set_memory(struct vhost_dev *d, struct vhost_memory __user *m)
 {
 	struct vhost_memory mem, *newmem;
 	struct vhost_memory_region *region;
-	struct vhost_umem *newumem, *oldumem;
+	struct vhost_iotlb *newumem, *oldumem;
 	unsigned long size = offsetof(struct vhost_memory, regions);
 	int i;
 
@@ -1448,7 +1376,7 @@ static long vhost_set_memory(struct vhost_dev *d, struct vhost_memory __user *m)
 		return -EFAULT;
 	}
 
-	newumem = vhost_umem_alloc();
+	newumem = iotlb_alloc();
 	if (!newumem) {
 		kvfree(newmem);
 		return -ENOMEM;
@@ -1457,13 +1385,12 @@ static long vhost_set_memory(struct vhost_dev *d, struct vhost_memory __user *m)
 	for (region = newmem->regions;
 	     region < newmem->regions + mem.nregions;
 	     region++) {
-		if (vhost_new_umem_range(newumem,
-					 region->guest_phys_addr,
-					 region->memory_size,
-					 region->guest_phys_addr +
-					 region->memory_size - 1,
-					 region->userspace_addr,
-					 VHOST_ACCESS_RW))
+		if (vhost_iotlb_add_range(newumem,
+					  region->guest_phys_addr,
+					  region->guest_phys_addr +
+					  region->memory_size - 1,
+					  region->userspace_addr,
+					  VHOST_MAP_RW))
 			goto err;
 	}
 
@@ -1481,11 +1408,11 @@ static long vhost_set_memory(struct vhost_dev *d, struct vhost_memory __user *m)
 	}
 
 	kvfree(newmem);
-	vhost_umem_clean(oldumem);
+	vhost_iotlb_free(oldumem);
 	return 0;
 
 err:
-	vhost_umem_clean(newumem);
+	vhost_iotlb_free(newumem);
 	kvfree(newmem);
 	return -EFAULT;
 }
@@ -1726,10 +1653,10 @@ EXPORT_SYMBOL_GPL(vhost_vring_ioctl);
 
 int vhost_init_device_iotlb(struct vhost_dev *d, bool enabled)
 {
-	struct vhost_umem *niotlb, *oiotlb;
+	struct vhost_iotlb *niotlb, *oiotlb;
 	int i;
 
-	niotlb = vhost_umem_alloc();
+	niotlb = iotlb_alloc();
 	if (!niotlb)
 		return -ENOMEM;
 
@@ -1745,7 +1672,7 @@ int vhost_init_device_iotlb(struct vhost_dev *d, bool enabled)
 		mutex_unlock(&vq->mutex);
 	}
 
-	vhost_umem_clean(oiotlb);
+	vhost_iotlb_free(oiotlb);
 
 	return 0;
 }
@@ -1875,8 +1802,8 @@ static int log_write(void __user *log_base,
 
 static int log_write_hva(struct vhost_virtqueue *vq, u64 hva, u64 len)
 {
-	struct vhost_umem *umem = vq->umem;
-	struct vhost_umem_node *u;
+	struct vhost_iotlb *umem = vq->umem;
+	struct vhost_iotlb_map *u;
 	u64 start, end, l, min;
 	int r;
 	bool hit = false;
@@ -1886,16 +1813,15 @@ static int log_write_hva(struct vhost_virtqueue *vq, u64 hva, u64 len)
 		/* More than one GPAs can be mapped into a single HVA. So
 		 * iterate all possible umems here to be safe.
 		 */
-		list_for_each_entry(u, &umem->umem_list, link) {
-			if (u->userspace_addr > hva - 1 + len ||
-			    u->userspace_addr - 1 + u->size < hva)
+		list_for_each_entry(u, &umem->list, link) {
+			if (u->addr > hva - 1 + len ||
+			    u->addr - 1 + u->size < hva)
 				continue;
-			start = max(u->userspace_addr, hva);
-			end = min(u->userspace_addr - 1 + u->size,
-				  hva - 1 + len);
+			start = max(u->addr, hva);
+			end = min(u->addr - 1 + u->size, hva - 1 + len);
 			l = end - start + 1;
 			r = log_write(vq->log_base,
-				      u->start + start - u->userspace_addr,
+				      u->start + start - u->addr,
 				      l);
 			if (r < 0)
 				return r;
@@ -2046,9 +1972,9 @@ EXPORT_SYMBOL_GPL(vhost_vq_init_access);
 static int translate_desc(struct vhost_virtqueue *vq, u64 addr, u32 len,
 			  struct iovec iov[], int iov_size, int access)
 {
-	const struct vhost_umem_node *node;
+	const struct vhost_iotlb_map *map;
 	struct vhost_dev *dev = vq->dev;
-	struct vhost_umem *umem = dev->iotlb ? dev->iotlb : dev->umem;
+	struct vhost_iotlb *umem = dev->iotlb ? dev->iotlb : dev->umem;
 	struct iovec *_iov;
 	u64 s = 0;
 	int ret = 0;
@@ -2060,25 +1986,24 @@ static int translate_desc(struct vhost_virtqueue *vq, u64 addr, u32 len,
 			break;
 		}
 
-		node = vhost_umem_interval_tree_iter_first(&umem->umem_tree,
-							addr, addr + len - 1);
-		if (node == NULL || node->start > addr) {
+		map = vhost_iotlb_itree_first(umem, addr, addr + len - 1);
+		if (map == NULL || map->start > addr) {
 			if (umem != dev->iotlb) {
 				ret = -EFAULT;
 				break;
 			}
 			ret = -EAGAIN;
 			break;
-		} else if (!(node->perm & access)) {
+		} else if (!(map->perm & access)) {
 			ret = -EPERM;
 			break;
 		}
 
 		_iov = iov + ret;
-		size = node->size - addr + node->start;
+		size = map->size - addr + map->start;
 		_iov->iov_len = min((u64)len - s, size);
 		_iov->iov_base = (void __user *)(unsigned long)
-			(node->userspace_addr + addr - node->start);
+				 (map->addr + addr - map->start);
 		s += size;
 		addr += size;
 		++ret;
diff --git a/drivers/vhost/vhost.h b/drivers/vhost/vhost.h
index a123fd7..1813821 100644
--- a/drivers/vhost/vhost.h
+++ b/drivers/vhost/vhost.h
@@ -12,6 +12,7 @@
 #include <linux/virtio_config.h>
 #include <linux/virtio_ring.h>
 #include <linux/atomic.h>
+#include <linux/vhost_iotlb.h>
 
 struct vhost_work;
 typedef void (*vhost_work_fn_t)(struct vhost_work *work);
@@ -52,27 +53,6 @@ struct vhost_log {
 	u64 len;
 };
 
-#define START(node) ((node)->start)
-#define LAST(node) ((node)->last)
-
-struct vhost_umem_node {
-	struct rb_node rb;
-	struct list_head link;
-	__u64 start;
-	__u64 last;
-	__u64 size;
-	__u64 userspace_addr;
-	__u32 perm;
-	__u32 flags_padding;
-	__u64 __subtree_last;
-};
-
-struct vhost_umem {
-	struct rb_root_cached umem_tree;
-	struct list_head umem_list;
-	int numem;
-};
-
 enum vhost_uaddr_type {
 	VHOST_ADDR_DESC = 0,
 	VHOST_ADDR_AVAIL = 1,
@@ -90,7 +70,7 @@ struct vhost_virtqueue {
 	struct vring_desc __user *desc;
 	struct vring_avail __user *avail;
 	struct vring_used __user *used;
-	const struct vhost_umem_node *meta_iotlb[VHOST_NUM_ADDRS];
+	const struct vhost_iotlb_map *meta_iotlb[VHOST_NUM_ADDRS];
 	struct file *kick;
 	struct eventfd_ctx *call_ctx;
 	struct eventfd_ctx *error_ctx;
@@ -128,8 +108,8 @@ struct vhost_virtqueue {
 	struct iovec *indirect;
 	struct vring_used_elem *heads;
 	/* Protected by virtqueue mutex. */
-	struct vhost_umem *umem;
-	struct vhost_umem *iotlb;
+	struct vhost_iotlb *umem;
+	struct vhost_iotlb *iotlb;
 	void *private_data;
 	u64 acked_features;
 	u64 acked_backend_features;
@@ -164,8 +144,8 @@ struct vhost_dev {
 	struct eventfd_ctx *log_ctx;
 	struct llist_head work_list;
 	struct task_struct *worker;
-	struct vhost_umem *umem;
-	struct vhost_umem *iotlb;
+	struct vhost_iotlb *umem;
+	struct vhost_iotlb *iotlb;
 	spinlock_t iotlb_lock;
 	struct list_head read_list;
 	struct list_head pending_list;
@@ -174,16 +154,20 @@ struct vhost_dev {
 	int weight;
 	int byte_weight;
 	u64 kcov_handle;
+	int (*msg_handler)(struct vhost_dev *dev,
+			   struct vhost_iotlb_msg *msg);
 };
 
 bool vhost_exceeds_weight(struct vhost_virtqueue *vq, int pkts, int total_len);
 void vhost_dev_init(struct vhost_dev *, struct vhost_virtqueue **vqs,
-		    int nvqs, int iov_limit, int weight, int byte_weight);
+		    int nvqs, int iov_limit, int weight, int byte_weight,
+		    int (*msg_handler)(struct vhost_dev *dev,
+				       struct vhost_iotlb_msg *msg));
 long vhost_dev_set_owner(struct vhost_dev *dev);
 bool vhost_dev_has_owner(struct vhost_dev *dev);
 long vhost_dev_check_owner(struct vhost_dev *);
-struct vhost_umem *vhost_dev_reset_owner_prepare(void);
-void vhost_dev_reset_owner(struct vhost_dev *, struct vhost_umem *);
+struct vhost_iotlb *vhost_dev_reset_owner_prepare(void);
+void vhost_dev_reset_owner(struct vhost_dev *dev, struct vhost_iotlb *iotlb);
 void vhost_dev_cleanup(struct vhost_dev *);
 void vhost_dev_stop(struct vhost_dev *);
 long vhost_dev_ioctl(struct vhost_dev *, unsigned int ioctl, void __user *argp);
@@ -229,6 +213,9 @@ ssize_t vhost_chr_write_iter(struct vhost_dev *dev,
 			     struct iov_iter *from);
 int vhost_init_device_iotlb(struct vhost_dev *d, bool enabled);
 
+void vhost_iotlb_map_free(struct vhost_iotlb *iotlb,
+			  struct vhost_iotlb_map *map);
+
 #define vq_err(vq, fmt, ...) do {                                  \
 		pr_debug(pr_fmt(fmt), ##__VA_ARGS__);       \
 		if ((vq)->error_ctx)                               \
diff --git a/drivers/vhost/vringh.c b/drivers/vhost/vringh.c
index a0a2d74..ee0491f 100644
--- a/drivers/vhost/vringh.c
+++ b/drivers/vhost/vringh.c
@@ -13,6 +13,9 @@
 #include <linux/uaccess.h>
 #include <linux/slab.h>
 #include <linux/export.h>
+#include <linux/bvec.h>
+#include <linux/highmem.h>
+#include <linux/vhost_iotlb.h>
 #include <uapi/linux/virtio_config.h>
 
 static __printf(1,2) __cold void vringh_bad(const char *fmt, ...)
@@ -71,9 +74,11 @@ static inline int __vringh_get_head(const struct vringh *vrh,
 }
 
 /* Copy some bytes to/from the iovec.  Returns num copied. */
-static inline ssize_t vringh_iov_xfer(struct vringh_kiov *iov,
+static inline ssize_t vringh_iov_xfer(struct vringh *vrh,
+				      struct vringh_kiov *iov,
 				      void *ptr, size_t len,
-				      int (*xfer)(void *addr, void *ptr,
+				      int (*xfer)(const struct vringh *vrh,
+						  void *addr, void *ptr,
 						  size_t len))
 {
 	int err, done = 0;
@@ -82,7 +87,7 @@ static inline ssize_t vringh_iov_xfer(struct vringh_kiov *iov,
 		size_t partlen;
 
 		partlen = min(iov->iov[iov->i].iov_len, len);
-		err = xfer(iov->iov[iov->i].iov_base, ptr, partlen);
+		err = xfer(vrh, iov->iov[iov->i].iov_base, ptr, partlen);
 		if (err)
 			return err;
 		done += partlen;
@@ -96,6 +101,7 @@ static inline ssize_t vringh_iov_xfer(struct vringh_kiov *iov,
 			/* Fix up old iov element then increment. */
 			iov->iov[iov->i].iov_len = iov->consumed;
 			iov->iov[iov->i].iov_base -= iov->consumed;
+
 			
 			iov->consumed = 0;
 			iov->i++;
@@ -227,7 +233,8 @@ static int slow_copy(struct vringh *vrh, void *dst, const void *src,
 				      u64 addr,
 				      struct vringh_range *r),
 		     struct vringh_range *range,
-		     int (*copy)(void *dst, const void *src, size_t len))
+		     int (*copy)(const struct vringh *vrh,
+				 void *dst, const void *src, size_t len))
 {
 	size_t part, len = sizeof(struct vring_desc);
 
@@ -241,7 +248,7 @@ static int slow_copy(struct vringh *vrh, void *dst, const void *src,
 		if (!rcheck(vrh, addr, &part, range, getrange))
 			return -EINVAL;
 
-		err = copy(dst, src, part);
+		err = copy(vrh, dst, src, part);
 		if (err)
 			return err;
 
@@ -262,7 +269,8 @@ __vringh_iov(struct vringh *vrh, u16 i,
 					     struct vringh_range *)),
 	     bool (*getrange)(struct vringh *, u64, struct vringh_range *),
 	     gfp_t gfp,
-	     int (*copy)(void *dst, const void *src, size_t len))
+	     int (*copy)(const struct vringh *vrh,
+			 void *dst, const void *src, size_t len))
 {
 	int err, count = 0, up_next, desc_max;
 	struct vring_desc desc, *descs;
@@ -291,7 +299,7 @@ __vringh_iov(struct vringh *vrh, u16 i,
 			err = slow_copy(vrh, &desc, &descs[i], rcheck, getrange,
 					&slowrange, copy);
 		else
-			err = copy(&desc, &descs[i], sizeof(desc));
+			err = copy(vrh, &desc, &descs[i], sizeof(desc));
 		if (unlikely(err))
 			goto fail;
 
@@ -404,7 +412,8 @@ static inline int __vringh_complete(struct vringh *vrh,
 				    unsigned int num_used,
 				    int (*putu16)(const struct vringh *vrh,
 						  __virtio16 *p, u16 val),
-				    int (*putused)(struct vring_used_elem *dst,
+				    int (*putused)(const struct vringh *vrh,
+						   struct vring_used_elem *dst,
 						   const struct vring_used_elem
 						   *src, unsigned num))
 {
@@ -420,12 +429,12 @@ static inline int __vringh_complete(struct vringh *vrh,
 	/* Compiler knows num_used == 1 sometimes, hence extra check */
 	if (num_used > 1 && unlikely(off + num_used >= vrh->vring.num)) {
 		u16 part = vrh->vring.num - off;
-		err = putused(&used_ring->ring[off], used, part);
+		err = putused(vrh, &used_ring->ring[off], used, part);
 		if (!err)
-			err = putused(&used_ring->ring[0], used + part,
+			err = putused(vrh, &used_ring->ring[0], used + part,
 				      num_used - part);
 	} else
-		err = putused(&used_ring->ring[off], used, num_used);
+		err = putused(vrh, &used_ring->ring[off], used, num_used);
 
 	if (err) {
 		vringh_bad("Failed to write %u used entries %u at %p",
@@ -564,13 +573,15 @@ static inline int putu16_user(const struct vringh *vrh, __virtio16 *p, u16 val)
 	return put_user(v, (__force __virtio16 __user *)p);
 }
 
-static inline int copydesc_user(void *dst, const void *src, size_t len)
+static inline int copydesc_user(const struct vringh *vrh,
+				void *dst, const void *src, size_t len)
 {
 	return copy_from_user(dst, (__force void __user *)src, len) ?
 		-EFAULT : 0;
 }
 
-static inline int putused_user(struct vring_used_elem *dst,
+static inline int putused_user(const struct vringh *vrh,
+			       struct vring_used_elem *dst,
 			       const struct vring_used_elem *src,
 			       unsigned int num)
 {
@@ -578,13 +589,15 @@ static inline int putused_user(struct vring_used_elem *dst,
 			    sizeof(*dst) * num) ? -EFAULT : 0;
 }
 
-static inline int xfer_from_user(void *src, void *dst, size_t len)
+static inline int xfer_from_user(const struct vringh *vrh, void *src,
+				 void *dst, size_t len)
 {
 	return copy_from_user(dst, (__force void __user *)src, len) ?
 		-EFAULT : 0;
 }
 
-static inline int xfer_to_user(void *dst, void *src, size_t len)
+static inline int xfer_to_user(const struct vringh *vrh,
+			       void *dst, void *src, size_t len)
 {
 	return copy_to_user((__force void __user *)dst, src, len) ?
 		-EFAULT : 0;
@@ -706,7 +719,7 @@ EXPORT_SYMBOL(vringh_getdesc_user);
  */
 ssize_t vringh_iov_pull_user(struct vringh_iov *riov, void *dst, size_t len)
 {
-	return vringh_iov_xfer((struct vringh_kiov *)riov,
+	return vringh_iov_xfer(NULL, (struct vringh_kiov *)riov,
 			       dst, len, xfer_from_user);
 }
 EXPORT_SYMBOL(vringh_iov_pull_user);
@@ -722,7 +735,7 @@ EXPORT_SYMBOL(vringh_iov_pull_user);
 ssize_t vringh_iov_push_user(struct vringh_iov *wiov,
 			     const void *src, size_t len)
 {
-	return vringh_iov_xfer((struct vringh_kiov *)wiov,
+	return vringh_iov_xfer(NULL, (struct vringh_kiov *)wiov,
 			       (void *)src, len, xfer_to_user);
 }
 EXPORT_SYMBOL(vringh_iov_push_user);
@@ -832,13 +845,15 @@ static inline int putu16_kern(const struct vringh *vrh, __virtio16 *p, u16 val)
 	return 0;
 }
 
-static inline int copydesc_kern(void *dst, const void *src, size_t len)
+static inline int copydesc_kern(const struct vringh *vrh,
+				void *dst, const void *src, size_t len)
 {
 	memcpy(dst, src, len);
 	return 0;
 }
 
-static inline int putused_kern(struct vring_used_elem *dst,
+static inline int putused_kern(const struct vringh *vrh,
+			       struct vring_used_elem *dst,
 			       const struct vring_used_elem *src,
 			       unsigned int num)
 {
@@ -846,13 +861,15 @@ static inline int putused_kern(struct vring_used_elem *dst,
 	return 0;
 }
 
-static inline int xfer_kern(void *src, void *dst, size_t len)
+static inline int xfer_kern(const struct vringh *vrh, void *src,
+			    void *dst, size_t len)
 {
 	memcpy(dst, src, len);
 	return 0;
 }
 
-static inline int kern_xfer(void *dst, void *src, size_t len)
+static inline int kern_xfer(const struct vringh *vrh, void *dst,
+			    void *src, size_t len)
 {
 	memcpy(dst, src, len);
 	return 0;
@@ -949,7 +966,7 @@ EXPORT_SYMBOL(vringh_getdesc_kern);
  */
 ssize_t vringh_iov_pull_kern(struct vringh_kiov *riov, void *dst, size_t len)
 {
-	return vringh_iov_xfer(riov, dst, len, xfer_kern);
+	return vringh_iov_xfer(NULL, riov, dst, len, xfer_kern);
 }
 EXPORT_SYMBOL(vringh_iov_pull_kern);
 
@@ -964,7 +981,7 @@ EXPORT_SYMBOL(vringh_iov_pull_kern);
 ssize_t vringh_iov_push_kern(struct vringh_kiov *wiov,
 			     const void *src, size_t len)
 {
-	return vringh_iov_xfer(wiov, (void *)src, len, kern_xfer);
+	return vringh_iov_xfer(NULL, wiov, (void *)src, len, kern_xfer);
 }
 EXPORT_SYMBOL(vringh_iov_push_kern);
 
@@ -1042,4 +1059,362 @@ int vringh_need_notify_kern(struct vringh *vrh)
 }
 EXPORT_SYMBOL(vringh_need_notify_kern);
 
+static int iotlb_translate(const struct vringh *vrh,
+			   u64 addr, u64 len, struct bio_vec iov[],
+			   int iov_size, u32 perm)
+{
+	struct vhost_iotlb_map *map;
+	struct vhost_iotlb *iotlb = vrh->iotlb;
+	int ret = 0;
+	u64 s = 0;
+
+	while (len > s) {
+		u64 size, pa, pfn;
+
+		if (unlikely(ret >= iov_size)) {
+			ret = -ENOBUFS;
+			break;
+		}
+
+		map = vhost_iotlb_itree_first(iotlb, addr,
+					      addr + len - 1);
+		if (!map || map->start > addr) {
+			ret = -EINVAL;
+			break;
+		} else if (!(map->perm & perm)) {
+			ret = -EPERM;
+			break;
+		}
+
+		size = map->size - addr + map->start;
+		pa = map->addr + addr - map->start;
+		pfn = pa >> PAGE_SHIFT;
+		iov[ret].bv_page = pfn_to_page(pfn);
+		iov[ret].bv_len = min(len - s, size);
+		iov[ret].bv_offset = pa & (PAGE_SIZE - 1);
+		s += size;
+		addr += size;
+		++ret;
+	}
+
+	return ret;
+}
+
+static inline int copy_from_iotlb(const struct vringh *vrh, void *dst,
+				  void *src, size_t len)
+{
+	struct iov_iter iter;
+	struct bio_vec iov[16];
+	int ret;
+
+	ret = iotlb_translate(vrh, (u64)(uintptr_t)src,
+			      len, iov, 16, VHOST_MAP_RO);
+	if (ret < 0)
+		return ret;
+
+	iov_iter_bvec(&iter, READ, iov, ret, len);
+
+	ret = copy_from_iter(dst, len, &iter);
+
+	return ret;
+}
+
+static inline int copy_to_iotlb(const struct vringh *vrh, void *dst,
+				void *src, size_t len)
+{
+	struct iov_iter iter;
+	struct bio_vec iov[16];
+	int ret;
+
+	ret = iotlb_translate(vrh, (u64)(uintptr_t)dst,
+			      len, iov, 16, VHOST_MAP_WO);
+	if (ret < 0)
+		return ret;
+
+	iov_iter_bvec(&iter, WRITE, iov, ret, len);
+
+	return copy_to_iter(src, len, &iter);
+}
+
+static inline int getu16_iotlb(const struct vringh *vrh,
+			       u16 *val, const __virtio16 *p)
+{
+	struct bio_vec iov;
+	void *kaddr, *from;
+	int ret;
+
+	/* Atomic read is needed for getu16 */
+	ret = iotlb_translate(vrh, (u64)(uintptr_t)p, sizeof(*p),
+			      &iov, 1, VHOST_MAP_RO);
+	if (ret < 0)
+		return ret;
+
+	kaddr = kmap_atomic(iov.bv_page);
+	from = kaddr + iov.bv_offset;
+	*val = vringh16_to_cpu(vrh, READ_ONCE(*(__virtio16 *)from));
+	kunmap_atomic(kaddr);
+
+	return 0;
+}
+
+static inline int putu16_iotlb(const struct vringh *vrh,
+			       __virtio16 *p, u16 val)
+{
+	struct bio_vec iov;
+	void *kaddr, *to;
+	int ret;
+
+	/* Atomic write is needed for putu16 */
+	ret = iotlb_translate(vrh, (u64)(uintptr_t)p, sizeof(*p),
+			      &iov, 1, VHOST_MAP_WO);
+	if (ret < 0)
+		return ret;
+
+	kaddr = kmap_atomic(iov.bv_page);
+	to = kaddr + iov.bv_offset;
+	WRITE_ONCE(*(__virtio16 *)to, cpu_to_vringh16(vrh, val));
+	kunmap_atomic(kaddr);
+
+	return 0;
+}
+
+static inline int copydesc_iotlb(const struct vringh *vrh,
+				 void *dst, const void *src, size_t len)
+{
+	int ret;
+
+	ret = copy_from_iotlb(vrh, dst, (void *)src, len);
+	if (ret != len)
+		return -EFAULT;
+
+	return 0;
+}
+
+static inline int xfer_from_iotlb(const struct vringh *vrh, void *src,
+				  void *dst, size_t len)
+{
+	int ret;
+
+	ret = copy_from_iotlb(vrh, dst, src, len);
+	if (ret != len)
+		return -EFAULT;
+
+	return 0;
+}
+
+static inline int xfer_to_iotlb(const struct vringh *vrh,
+			       void *dst, void *src, size_t len)
+{
+	int ret;
+
+	ret = copy_to_iotlb(vrh, dst, src, len);
+	if (ret != len)
+		return -EFAULT;
+
+	return 0;
+}
+
+static inline int putused_iotlb(const struct vringh *vrh,
+				struct vring_used_elem *dst,
+				const struct vring_used_elem *src,
+				unsigned int num)
+{
+	int size = num * sizeof(*dst);
+	int ret;
+
+	ret = copy_to_iotlb(vrh, dst, (void *)src, num * sizeof(*dst));
+	if (ret != size)
+		return -EFAULT;
+
+	return 0;
+}
+
+/**
+ * vringh_init_iotlb - initialize a vringh for a ring with IOTLB.
+ * @vrh: the vringh to initialize.
+ * @features: the feature bits for this ring.
+ * @num: the number of elements.
+ * @weak_barriers: true if we only need memory barriers, not I/O.
+ * @desc: the userpace descriptor pointer.
+ * @avail: the userpace avail pointer.
+ * @used: the userpace used pointer.
+ *
+ * Returns an error if num is invalid.
+ */
+int vringh_init_iotlb(struct vringh *vrh, u64 features,
+		      unsigned int num, bool weak_barriers,
+		      struct vring_desc *desc,
+		      struct vring_avail *avail,
+		      struct vring_used *used)
+{
+	return vringh_init_kern(vrh, features, num, weak_barriers,
+				desc, avail, used);
+}
+EXPORT_SYMBOL(vringh_init_iotlb);
+
+/**
+ * vringh_set_iotlb - initialize a vringh for a ring with IOTLB.
+ * @vrh: the vring
+ * @iotlb: iotlb associated with this vring
+ */
+void vringh_set_iotlb(struct vringh *vrh, struct vhost_iotlb *iotlb)
+{
+	vrh->iotlb = iotlb;
+}
+EXPORT_SYMBOL(vringh_set_iotlb);
+
+/**
+ * vringh_getdesc_iotlb - get next available descriptor from ring with
+ * IOTLB.
+ * @vrh: the kernelspace vring.
+ * @riov: where to put the readable descriptors (or NULL)
+ * @wiov: where to put the writable descriptors (or NULL)
+ * @head: head index we received, for passing to vringh_complete_iotlb().
+ * @gfp: flags for allocating larger riov/wiov.
+ *
+ * Returns 0 if there was no descriptor, 1 if there was, or -errno.
+ *
+ * Note that on error return, you can tell the difference between an
+ * invalid ring and a single invalid descriptor: in the former case,
+ * *head will be vrh->vring.num.  You may be able to ignore an invalid
+ * descriptor, but there's not much you can do with an invalid ring.
+ *
+ * Note that you may need to clean up riov and wiov, even on error!
+ */
+int vringh_getdesc_iotlb(struct vringh *vrh,
+			 struct vringh_kiov *riov,
+			 struct vringh_kiov *wiov,
+			 u16 *head,
+			 gfp_t gfp)
+{
+	int err;
+
+	err = __vringh_get_head(vrh, getu16_iotlb, &vrh->last_avail_idx);
+	if (err < 0)
+		return err;
+
+	/* Empty... */
+	if (err == vrh->vring.num)
+		return 0;
+
+	*head = err;
+	err = __vringh_iov(vrh, *head, riov, wiov, no_range_check, NULL,
+			   gfp, copydesc_iotlb);
+	if (err)
+		return err;
+
+	return 1;
+}
+EXPORT_SYMBOL(vringh_getdesc_iotlb);
+
+/**
+ * vringh_iov_pull_iotlb - copy bytes from vring_iov.
+ * @vrh: the vring.
+ * @riov: the riov as passed to vringh_getdesc_iotlb() (updated as we consume)
+ * @dst: the place to copy.
+ * @len: the maximum length to copy.
+ *
+ * Returns the bytes copied <= len or a negative errno.
+ */
+ssize_t vringh_iov_pull_iotlb(struct vringh *vrh,
+			      struct vringh_kiov *riov,
+			      void *dst, size_t len)
+{
+	return vringh_iov_xfer(vrh, riov, dst, len, xfer_from_iotlb);
+}
+EXPORT_SYMBOL(vringh_iov_pull_iotlb);
+
+/**
+ * vringh_iov_push_iotlb - copy bytes into vring_iov.
+ * @vrh: the vring.
+ * @wiov: the wiov as passed to vringh_getdesc_iotlb() (updated as we consume)
+ * @dst: the place to copy.
+ * @len: the maximum length to copy.
+ *
+ * Returns the bytes copied <= len or a negative errno.
+ */
+ssize_t vringh_iov_push_iotlb(struct vringh *vrh,
+			      struct vringh_kiov *wiov,
+			      const void *src, size_t len)
+{
+	return vringh_iov_xfer(vrh, wiov, (void *)src, len, xfer_to_iotlb);
+}
+EXPORT_SYMBOL(vringh_iov_push_iotlb);
+
+/**
+ * vringh_abandon_iotlb - we've decided not to handle the descriptor(s).
+ * @vrh: the vring.
+ * @num: the number of descriptors to put back (ie. num
+ *	 vringh_get_iotlb() to undo).
+ *
+ * The next vringh_get_iotlb() will return the old descriptor(s) again.
+ */
+void vringh_abandon_iotlb(struct vringh *vrh, unsigned int num)
+{
+	/* We only update vring_avail_event(vr) when we want to be notified,
+	 * so we haven't changed that yet.
+	 */
+	vrh->last_avail_idx -= num;
+}
+EXPORT_SYMBOL(vringh_abandon_iotlb);
+
+/**
+ * vringh_complete_iotlb - we've finished with descriptor, publish it.
+ * @vrh: the vring.
+ * @head: the head as filled in by vringh_getdesc_iotlb.
+ * @len: the length of data we have written.
+ *
+ * You should check vringh_need_notify_iotlb() after one or more calls
+ * to this function.
+ */
+int vringh_complete_iotlb(struct vringh *vrh, u16 head, u32 len)
+{
+	struct vring_used_elem used;
+
+	used.id = cpu_to_vringh32(vrh, head);
+	used.len = cpu_to_vringh32(vrh, len);
+
+	return __vringh_complete(vrh, &used, 1, putu16_iotlb, putused_iotlb);
+}
+EXPORT_SYMBOL(vringh_complete_iotlb);
+
+/**
+ * vringh_notify_enable_iotlb - we want to know if something changes.
+ * @vrh: the vring.
+ *
+ * This always enables notifications, but returns false if there are
+ * now more buffers available in the vring.
+ */
+bool vringh_notify_enable_iotlb(struct vringh *vrh)
+{
+	return __vringh_notify_enable(vrh, getu16_iotlb, putu16_iotlb);
+}
+EXPORT_SYMBOL(vringh_notify_enable_iotlb);
+
+/**
+ * vringh_notify_disable_iotlb - don't tell us if something changes.
+ * @vrh: the vring.
+ *
+ * This is our normal running state: we disable and then only enable when
+ * we're going to sleep.
+ */
+void vringh_notify_disable_iotlb(struct vringh *vrh)
+{
+	__vringh_notify_disable(vrh, putu16_iotlb);
+}
+EXPORT_SYMBOL(vringh_notify_disable_iotlb);
+
+/**
+ * vringh_need_notify_iotlb - must we tell the other side about used buffers?
+ * @vrh: the vring we've called vringh_complete_iotlb() on.
+ *
+ * Returns -errno or 0 if we don't need to tell the other side, 1 if we do.
+ */
+int vringh_need_notify_iotlb(struct vringh *vrh)
+{
+	return __vringh_need_notify(vrh, getu16_iotlb);
+}
+EXPORT_SYMBOL(vringh_need_notify_iotlb);
+
+
 MODULE_LICENSE("GPL");
diff --git a/drivers/vhost/vsock.c b/drivers/vhost/vsock.c
index c2d7d57..9766948 100644
--- a/drivers/vhost/vsock.c
+++ b/drivers/vhost/vsock.c
@@ -621,7 +621,7 @@ static int vhost_vsock_dev_open(struct inode *inode, struct file *file)
 
 	vhost_dev_init(&vsock->dev, vqs, ARRAY_SIZE(vsock->vqs),
 		       UIO_MAXIOV, VHOST_VSOCK_PKT_WEIGHT,
-		       VHOST_VSOCK_WEIGHT);
+		       VHOST_VSOCK_WEIGHT, NULL);
 
 	file->private_data = vsock;
 	spin_lock_init(&vsock->send_pkt_list_lock);
diff --git a/drivers/video/backlight/corgi_lcd.c b/drivers/video/backlight/corgi_lcd.c
index 68f7592..25ef0cb 100644
--- a/drivers/video/backlight/corgi_lcd.c
+++ b/drivers/video/backlight/corgi_lcd.c
@@ -15,7 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/fb.h>
 #include <linux/lcd.h>
 #include <linux/spi/spi.h>
@@ -90,9 +90,8 @@ struct corgi_lcd {
 	int	mode;
 	char	buf[2];
 
-	int	gpio_backlight_on;
-	int	gpio_backlight_cont;
-	int	gpio_backlight_cont_inverted;
+	struct gpio_desc *backlight_on;
+	struct gpio_desc *backlight_cont;
 
 	void (*kick_battery)(void);
 };
@@ -403,13 +402,13 @@ static int corgi_bl_set_intensity(struct corgi_lcd *lcd, int intensity)
 	corgi_ssp_lcdtg_send(lcd, DUTYCTRL_ADRS, intensity);
 
 	/* Bit 5 via GPIO_BACKLIGHT_CONT */
-	cont = !!(intensity & 0x20) ^ lcd->gpio_backlight_cont_inverted;
+	cont = !!(intensity & 0x20);
 
-	if (gpio_is_valid(lcd->gpio_backlight_cont))
-		gpio_set_value_cansleep(lcd->gpio_backlight_cont, cont);
+	if (lcd->backlight_cont)
+		gpiod_set_value_cansleep(lcd->backlight_cont, cont);
 
-	if (gpio_is_valid(lcd->gpio_backlight_on))
-		gpio_set_value_cansleep(lcd->gpio_backlight_on, intensity);
+	if (lcd->backlight_on)
+		gpiod_set_value_cansleep(lcd->backlight_on, intensity);
 
 	if (lcd->kick_battery)
 		lcd->kick_battery();
@@ -482,48 +481,17 @@ static int setup_gpio_backlight(struct corgi_lcd *lcd,
 				struct corgi_lcd_platform_data *pdata)
 {
 	struct spi_device *spi = lcd->spi_dev;
-	int err;
 
-	lcd->gpio_backlight_on = -1;
-	lcd->gpio_backlight_cont = -1;
+	lcd->backlight_on = devm_gpiod_get_optional(&spi->dev,
+						    "BL_ON", GPIOD_OUT_LOW);
+	if (IS_ERR(lcd->backlight_on))
+		return PTR_ERR(lcd->backlight_on);
 
-	if (gpio_is_valid(pdata->gpio_backlight_on)) {
-		err = devm_gpio_request(&spi->dev, pdata->gpio_backlight_on,
-					"BL_ON");
-		if (err) {
-			dev_err(&spi->dev,
-				"failed to request GPIO%d for backlight_on\n",
-				pdata->gpio_backlight_on);
-			return err;
-		}
+	lcd->backlight_cont = devm_gpiod_get_optional(&spi->dev, "BL_CONT",
+						      GPIOD_OUT_LOW);
+	if (IS_ERR(lcd->backlight_cont))
+		return PTR_ERR(lcd->backlight_cont);
 
-		lcd->gpio_backlight_on = pdata->gpio_backlight_on;
-		gpio_direction_output(lcd->gpio_backlight_on, 0);
-	}
-
-	if (gpio_is_valid(pdata->gpio_backlight_cont)) {
-		err = devm_gpio_request(&spi->dev, pdata->gpio_backlight_cont,
-					"BL_CONT");
-		if (err) {
-			dev_err(&spi->dev,
-				"failed to request GPIO%d for backlight_cont\n",
-				pdata->gpio_backlight_cont);
-			return err;
-		}
-
-		lcd->gpio_backlight_cont = pdata->gpio_backlight_cont;
-
-		/* spitz and akita use both GPIOs for backlight, and
-		 * have inverted polarity of GPIO_BACKLIGHT_CONT
-		 */
-		if (gpio_is_valid(lcd->gpio_backlight_on)) {
-			lcd->gpio_backlight_cont_inverted = 1;
-			gpio_direction_output(lcd->gpio_backlight_cont, 1);
-		} else {
-			lcd->gpio_backlight_cont_inverted = 0;
-			gpio_direction_output(lcd->gpio_backlight_cont, 0);
-		}
-	}
 	return 0;
 }
 
diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
index efb4efc..82b8d75 100644
--- a/drivers/video/backlight/pwm_bl.c
+++ b/drivers/video/backlight/pwm_bl.c
@@ -7,7 +7,6 @@
 
 #include <linux/delay.h>
 #include <linux/gpio/consumer.h>
-#include <linux/gpio.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -258,8 +257,6 @@ static int pwm_backlight_parse_dt(struct device *dev,
 			     &data->post_pwm_on_delay);
 	of_property_read_u32(node, "pwm-off-delay-ms", &data->pwm_off_delay);
 
-	data->enable_gpio = -EINVAL;
-
 	/*
 	 * Determine the number of brightness levels, if this property is not
 	 * set a default table of brightness levels will be used.
@@ -503,22 +500,6 @@ static int pwm_backlight_probe(struct platform_device *pdev)
 	}
 
 	/*
-	 * Compatibility fallback for drivers still using the integer GPIO
-	 * platform data. Must go away soon.
-	 */
-	if (!pb->enable_gpio && gpio_is_valid(data->enable_gpio)) {
-		ret = devm_gpio_request_one(&pdev->dev, data->enable_gpio,
-					    GPIOF_OUT_INIT_HIGH, "enable");
-		if (ret < 0) {
-			dev_err(&pdev->dev, "failed to request GPIO#%d: %d\n",
-				data->enable_gpio, ret);
-			goto err_alloc;
-		}
-
-		pb->enable_gpio = gpio_to_desc(data->enable_gpio);
-	}
-
-	/*
 	 * If the GPIO is not known to be already configured as output, that
 	 * is, if gpiod_get_direction returns either 1 or -EINVAL, change the
 	 * direction to output and set the GPIO as active.
diff --git a/drivers/video/fbdev/core/fbcon.c b/drivers/video/fbdev/core/fbcon.c
index 2833578..9d28a8e 100644
--- a/drivers/video/fbdev/core/fbcon.c
+++ b/drivers/video/fbdev/core/fbcon.c
@@ -1282,6 +1282,9 @@ static void fbcon_deinit(struct vc_data *vc)
 	if (!con_is_bound(&fb_con))
 		fbcon_exit();
 
+	if (vc->vc_num == logo_shown)
+		logo_shown = FBCON_LOGO_CANSHOW;
+
 	return;
 }
 
diff --git a/drivers/video/fbdev/pxa3xx-gcu.c b/drivers/video/fbdev/pxa3xx-gcu.c
index 74ffb44..4279e13 100644
--- a/drivers/video/fbdev/pxa3xx-gcu.c
+++ b/drivers/video/fbdev/pxa3xx-gcu.c
@@ -36,7 +36,6 @@
 #include "pxa3xx-gcu.h"
 
 #define DRV_NAME	"pxa3xx-gcu"
-#define MISCDEV_MINOR	197
 
 #define REG_GCCR	0x00
 #define GCCR_SYNC_CLR	(1 << 9)
@@ -595,7 +594,7 @@ static int pxa3xx_gcu_probe(struct platform_device *pdev)
 	 * container_of(). This isn't really necessary as we have a fixed minor
 	 * number anyway, but this is to avoid statics. */
 
-	priv->misc_dev.minor	= MISCDEV_MINOR,
+	priv->misc_dev.minor	= PXA3XX_GCU_MINOR,
 	priv->misc_dev.name	= DRV_NAME,
 	priv->misc_dev.fops	= &pxa3xx_gcu_miscdev_fops;
 
@@ -638,7 +637,7 @@ static int pxa3xx_gcu_probe(struct platform_device *pdev)
 	ret = misc_register(&priv->misc_dev);
 	if (ret < 0) {
 		dev_err(dev, "misc_register() for minor %d failed\n",
-			MISCDEV_MINOR);
+			PXA3XX_GCU_MINOR);
 		goto err_free_dma;
 	}
 
@@ -714,7 +713,7 @@ module_platform_driver(pxa3xx_gcu_driver);
 
 MODULE_DESCRIPTION("PXA3xx graphics controller unit driver");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS_MISCDEV(MISCDEV_MINOR);
+MODULE_ALIAS_MISCDEV(PXA3XX_GCU_MINOR);
 MODULE_AUTHOR("Janine Kropp <nin@directfb.org>, "
 		"Denis Oliver Kropp <dok@directfb.org>, "
 		"Daniel Mack <daniel@caiaq.de>");
diff --git a/drivers/video/logo/.gitignore b/drivers/video/logo/.gitignore
index 9dda1b2..5311d20 100644
--- a/drivers/video/logo/.gitignore
+++ b/drivers/video/logo/.gitignore
@@ -1,6 +1,4 @@
-#
-# Generated files
-#
+# SPDX-License-Identifier: GPL-2.0-only
 *_mono.c
 *_vga16.c
 *_clut224.c
diff --git a/drivers/virt/vboxguest/vboxguest_core.c b/drivers/virt/vboxguest/vboxguest_core.c
index d823d55..b690a8a 100644
--- a/drivers/virt/vboxguest/vboxguest_core.c
+++ b/drivers/virt/vboxguest/vboxguest_core.c
@@ -1553,8 +1553,8 @@ int vbg_core_ioctl(struct vbg_session *session, unsigned int req, void *data)
 #ifdef CONFIG_COMPAT
 	case VBG_IOCTL_HGCM_CALL_32(0):
 		f32bit = true;
+		fallthrough;
 #endif
-		/* Fall through */
 	case VBG_IOCTL_HGCM_CALL(0):
 		return vbg_ioctl_hgcm_call(gdev, session, f32bit, data);
 	case VBG_IOCTL_LOG(0):
diff --git a/drivers/virt/vboxguest/vboxguest_utils.c b/drivers/virt/vboxguest/vboxguest_utils.c
index 50920b6..7396187 100644
--- a/drivers/virt/vboxguest/vboxguest_utils.c
+++ b/drivers/virt/vboxguest/vboxguest_utils.c
@@ -311,7 +311,7 @@ static u32 hgcm_call_linear_addr_type_to_pagelist_flags(
 	switch (type) {
 	default:
 		WARN_ON(1);
-		/* Fall through */
+		fallthrough;
 	case VMMDEV_HGCM_PARM_TYPE_LINADDR:
 	case VMMDEV_HGCM_PARM_TYPE_LINADDR_KERNEL:
 		return VMMDEV_HGCM_F_PARM_DIRECTION_BOTH;
diff --git a/drivers/virtio/Kconfig b/drivers/virtio/Kconfig
index 078615c..2bbf94b 100644
--- a/drivers/virtio/Kconfig
+++ b/drivers/virtio/Kconfig
@@ -43,6 +43,19 @@
 
 	  If unsure, say Y.
 
+config VIRTIO_VDPA
+	tristate "vDPA driver for virtio devices"
+	select VDPA
+	select VIRTIO
+	help
+	  This driver provides support for virtio based paravirtual
+	  device driver over vDPA bus. For this to be useful, you need
+	  an appropriate vDPA device implementation that operates on a
+	  physical device to allow the datapath of virtio to be
+	  offloaded to hardware.
+
+	  If unsure, say M.
+
 config VIRTIO_PMEM
 	tristate "Support for virtio pmem driver"
 	depends on VIRTIO
@@ -58,6 +71,7 @@
 	tristate "Virtio balloon driver"
 	depends on VIRTIO
 	select MEMORY_BALLOON
+	select PAGE_REPORTING
 	---help---
 	 This driver supports increasing and decreasing the amount
 	 of memory within a KVM guest.
diff --git a/drivers/virtio/Makefile b/drivers/virtio/Makefile
index 3a2b5c5..29a1386e 100644
--- a/drivers/virtio/Makefile
+++ b/drivers/virtio/Makefile
@@ -6,3 +6,4 @@
 virtio_pci-$(CONFIG_VIRTIO_PCI_LEGACY) += virtio_pci_legacy.o
 obj-$(CONFIG_VIRTIO_BALLOON) += virtio_balloon.o
 obj-$(CONFIG_VIRTIO_INPUT) += virtio_input.o
+obj-$(CONFIG_VIRTIO_VDPA) += virtio_vdpa.o
diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c
index 341458f..0ef1656 100644
--- a/drivers/virtio/virtio_balloon.c
+++ b/drivers/virtio/virtio_balloon.c
@@ -14,11 +14,13 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/balloon_compaction.h>
+#include <linux/oom.h>
 #include <linux/wait.h>
 #include <linux/mm.h>
 #include <linux/mount.h>
 #include <linux/magic.h>
 #include <linux/pseudo_fs.h>
+#include <linux/page_reporting.h>
 
 /*
  * Balloon device works in 4K page units.  So each page is pointed to by
@@ -27,7 +29,9 @@
  */
 #define VIRTIO_BALLOON_PAGES_PER_PAGE (unsigned)(PAGE_SIZE >> VIRTIO_BALLOON_PFN_SHIFT)
 #define VIRTIO_BALLOON_ARRAY_PFNS_MAX 256
-#define VIRTBALLOON_OOM_NOTIFY_PRIORITY 80
+/* Maximum number of (4k) pages to deflate on OOM notifications. */
+#define VIRTIO_BALLOON_OOM_NR_PAGES 256
+#define VIRTIO_BALLOON_OOM_NOTIFY_PRIORITY 80
 
 #define VIRTIO_BALLOON_FREE_PAGE_ALLOC_FLAG (__GFP_NORETRY | __GFP_NOWARN | \
 					     __GFP_NOMEMALLOC)
@@ -47,6 +51,7 @@ enum virtio_balloon_vq {
 	VIRTIO_BALLOON_VQ_DEFLATE,
 	VIRTIO_BALLOON_VQ_STATS,
 	VIRTIO_BALLOON_VQ_FREE_PAGE,
+	VIRTIO_BALLOON_VQ_REPORTING,
 	VIRTIO_BALLOON_VQ_MAX
 };
 
@@ -112,8 +117,15 @@ struct virtio_balloon {
 	/* Memory statistics */
 	struct virtio_balloon_stat stats[VIRTIO_BALLOON_S_NR];
 
-	/* To register a shrinker to shrink memory upon memory pressure */
+	/* Shrinker to return free pages - VIRTIO_BALLOON_F_FREE_PAGE_HINT */
 	struct shrinker shrinker;
+
+	/* OOM notifier to deflate on OOM - VIRTIO_BALLOON_F_DEFLATE_ON_OOM */
+	struct notifier_block oom_nb;
+
+	/* Free page reporting device */
+	struct virtqueue *reporting_vq;
+	struct page_reporting_dev_info pr_dev_info;
 };
 
 static struct virtio_device_id id_table[] = {
@@ -153,6 +165,33 @@ static void tell_host(struct virtio_balloon *vb, struct virtqueue *vq)
 
 }
 
+int virtballoon_free_page_report(struct page_reporting_dev_info *pr_dev_info,
+				   struct scatterlist *sg, unsigned int nents)
+{
+	struct virtio_balloon *vb =
+		container_of(pr_dev_info, struct virtio_balloon, pr_dev_info);
+	struct virtqueue *vq = vb->reporting_vq;
+	unsigned int unused, err;
+
+	/* We should always be able to add these buffers to an empty queue. */
+	err = virtqueue_add_inbuf(vq, sg, nents, vb, GFP_NOWAIT | __GFP_NOWARN);
+
+	/*
+	 * In the extremely unlikely case that something has occurred and we
+	 * are able to trigger an error we will simply display a warning
+	 * and exit without actually processing the pages.
+	 */
+	if (WARN_ON_ONCE(err))
+		return err;
+
+	virtqueue_kick(vq);
+
+	/* When host has read buffer, this completes via balloon_ack */
+	wait_event(vb->acked, virtqueue_get_buf(vq, &unused));
+
+	return 0;
+}
+
 static void set_page_pfns(struct virtio_balloon *vb,
 			  __virtio32 pfns[], struct page *page)
 {
@@ -481,6 +520,7 @@ static int init_vqs(struct virtio_balloon *vb)
 	names[VIRTIO_BALLOON_VQ_STATS] = NULL;
 	callbacks[VIRTIO_BALLOON_VQ_FREE_PAGE] = NULL;
 	names[VIRTIO_BALLOON_VQ_FREE_PAGE] = NULL;
+	names[VIRTIO_BALLOON_VQ_REPORTING] = NULL;
 
 	if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_STATS_VQ)) {
 		names[VIRTIO_BALLOON_VQ_STATS] = "stats";
@@ -492,6 +532,11 @@ static int init_vqs(struct virtio_balloon *vb)
 		callbacks[VIRTIO_BALLOON_VQ_FREE_PAGE] = NULL;
 	}
 
+	if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_REPORTING)) {
+		names[VIRTIO_BALLOON_VQ_REPORTING] = "reporting_vq";
+		callbacks[VIRTIO_BALLOON_VQ_REPORTING] = balloon_ack;
+	}
+
 	err = vb->vdev->config->find_vqs(vb->vdev, VIRTIO_BALLOON_VQ_MAX,
 					 vqs, callbacks, names, NULL, NULL);
 	if (err)
@@ -524,6 +569,9 @@ static int init_vqs(struct virtio_balloon *vb)
 	if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_FREE_PAGE_HINT))
 		vb->free_page_vq = vqs[VIRTIO_BALLOON_VQ_FREE_PAGE];
 
+	if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_REPORTING))
+		vb->reporting_vq = vqs[VIRTIO_BALLOON_VQ_REPORTING];
+
 	return 0;
 }
 
@@ -788,50 +836,13 @@ static unsigned long shrink_free_pages(struct virtio_balloon *vb,
 	return blocks_freed * VIRTIO_BALLOON_HINT_BLOCK_PAGES;
 }
 
-static unsigned long leak_balloon_pages(struct virtio_balloon *vb,
-                                          unsigned long pages_to_free)
-{
-	return leak_balloon(vb, pages_to_free * VIRTIO_BALLOON_PAGES_PER_PAGE) /
-		VIRTIO_BALLOON_PAGES_PER_PAGE;
-}
-
-static unsigned long shrink_balloon_pages(struct virtio_balloon *vb,
-					  unsigned long pages_to_free)
-{
-	unsigned long pages_freed = 0;
-
-	/*
-	 * One invocation of leak_balloon can deflate at most
-	 * VIRTIO_BALLOON_ARRAY_PFNS_MAX balloon pages, so we call it
-	 * multiple times to deflate pages till reaching pages_to_free.
-	 */
-	while (vb->num_pages && pages_freed < pages_to_free)
-		pages_freed += leak_balloon_pages(vb,
-						  pages_to_free - pages_freed);
-
-	update_balloon_size(vb);
-
-	return pages_freed;
-}
-
 static unsigned long virtio_balloon_shrinker_scan(struct shrinker *shrinker,
 						  struct shrink_control *sc)
 {
-	unsigned long pages_to_free, pages_freed = 0;
 	struct virtio_balloon *vb = container_of(shrinker,
 					struct virtio_balloon, shrinker);
 
-	pages_to_free = sc->nr_to_scan;
-
-	if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_FREE_PAGE_HINT))
-		pages_freed = shrink_free_pages(vb, pages_to_free);
-
-	if (pages_freed >= pages_to_free)
-		return pages_freed;
-
-	pages_freed += shrink_balloon_pages(vb, pages_to_free - pages_freed);
-
-	return pages_freed;
+	return shrink_free_pages(vb, sc->nr_to_scan);
 }
 
 static unsigned long virtio_balloon_shrinker_count(struct shrinker *shrinker,
@@ -839,12 +850,22 @@ static unsigned long virtio_balloon_shrinker_count(struct shrinker *shrinker,
 {
 	struct virtio_balloon *vb = container_of(shrinker,
 					struct virtio_balloon, shrinker);
-	unsigned long count;
 
-	count = vb->num_pages / VIRTIO_BALLOON_PAGES_PER_PAGE;
-	count += vb->num_free_page_blocks * VIRTIO_BALLOON_HINT_BLOCK_PAGES;
+	return vb->num_free_page_blocks * VIRTIO_BALLOON_HINT_BLOCK_PAGES;
+}
 
-	return count;
+static int virtio_balloon_oom_notify(struct notifier_block *nb,
+				     unsigned long dummy, void *parm)
+{
+	struct virtio_balloon *vb = container_of(nb,
+						 struct virtio_balloon, oom_nb);
+	unsigned long *freed = parm;
+
+	*freed += leak_balloon(vb, VIRTIO_BALLOON_OOM_NR_PAGES) /
+		  VIRTIO_BALLOON_PAGES_PER_PAGE;
+	update_balloon_size(vb);
+
+	return NOTIFY_OK;
 }
 
 static void virtio_balloon_unregister_shrinker(struct virtio_balloon *vb)
@@ -864,7 +885,6 @@ static int virtio_balloon_register_shrinker(struct virtio_balloon *vb)
 static int virtballoon_probe(struct virtio_device *vdev)
 {
 	struct virtio_balloon *vb;
-	__u32 poison_val;
 	int err;
 
 	if (!vdev->config->get) {
@@ -930,27 +950,65 @@ static int virtballoon_probe(struct virtio_device *vdev)
 						  VIRTIO_BALLOON_CMD_ID_STOP);
 		spin_lock_init(&vb->free_page_list_lock);
 		INIT_LIST_HEAD(&vb->free_page_list);
-		if (virtio_has_feature(vdev, VIRTIO_BALLOON_F_PAGE_POISON)) {
-			memset(&poison_val, PAGE_POISON, sizeof(poison_val));
-			virtio_cwrite(vb->vdev, struct virtio_balloon_config,
-				      poison_val, &poison_val);
-		}
-	}
-	/*
-	 * We continue to use VIRTIO_BALLOON_F_DEFLATE_ON_OOM to decide if a
-	 * shrinker needs to be registered to relieve memory pressure.
-	 */
-	if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_DEFLATE_ON_OOM)) {
+		/*
+		 * We're allowed to reuse any free pages, even if they are
+		 * still to be processed by the host.
+		 */
 		err = virtio_balloon_register_shrinker(vb);
 		if (err)
 			goto out_del_balloon_wq;
 	}
+
+	if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_DEFLATE_ON_OOM)) {
+		vb->oom_nb.notifier_call = virtio_balloon_oom_notify;
+		vb->oom_nb.priority = VIRTIO_BALLOON_OOM_NOTIFY_PRIORITY;
+		err = register_oom_notifier(&vb->oom_nb);
+		if (err < 0)
+			goto out_unregister_shrinker;
+	}
+
+	if (virtio_has_feature(vdev, VIRTIO_BALLOON_F_PAGE_POISON)) {
+		/* Start with poison val of 0 representing general init */
+		__u32 poison_val = 0;
+
+		/*
+		 * Let the hypervisor know that we are expecting a
+		 * specific value to be written back in balloon pages.
+		 */
+		if (!want_init_on_free())
+			memset(&poison_val, PAGE_POISON, sizeof(poison_val));
+
+		virtio_cwrite(vb->vdev, struct virtio_balloon_config,
+			      poison_val, &poison_val);
+	}
+
+	vb->pr_dev_info.report = virtballoon_free_page_report;
+	if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_REPORTING)) {
+		unsigned int capacity;
+
+		capacity = virtqueue_get_vring_size(vb->reporting_vq);
+		if (capacity < PAGE_REPORTING_CAPACITY) {
+			err = -ENOSPC;
+			goto out_unregister_oom;
+		}
+
+		err = page_reporting_register(&vb->pr_dev_info);
+		if (err)
+			goto out_unregister_oom;
+	}
+
 	virtio_device_ready(vdev);
 
 	if (towards_target(vb))
 		virtballoon_changed(vdev);
 	return 0;
 
+out_unregister_oom:
+	if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_DEFLATE_ON_OOM))
+		unregister_oom_notifier(&vb->oom_nb);
+out_unregister_shrinker:
+	if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_FREE_PAGE_HINT))
+		virtio_balloon_unregister_shrinker(vb);
 out_del_balloon_wq:
 	if (virtio_has_feature(vdev, VIRTIO_BALLOON_F_FREE_PAGE_HINT))
 		destroy_workqueue(vb->balloon_wq);
@@ -989,7 +1047,11 @@ static void virtballoon_remove(struct virtio_device *vdev)
 {
 	struct virtio_balloon *vb = vdev->priv;
 
+	if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_REPORTING))
+		page_reporting_unregister(&vb->pr_dev_info);
 	if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_DEFLATE_ON_OOM))
+		unregister_oom_notifier(&vb->oom_nb);
+	if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_FREE_PAGE_HINT))
 		virtio_balloon_unregister_shrinker(vb);
 	spin_lock_irq(&vb->stop_update_lock);
 	vb->stop_update = true;
@@ -1045,7 +1107,10 @@ static int virtballoon_restore(struct virtio_device *vdev)
 
 static int virtballoon_validate(struct virtio_device *vdev)
 {
-	if (!page_poisoning_enabled())
+	/* Tell the host whether we care about poisoned pages. */
+	if (!want_init_on_free() &&
+	    (IS_ENABLED(CONFIG_PAGE_POISONING_NO_SANITY) ||
+	     !page_poisoning_enabled()))
 		__virtio_clear_bit(vdev, VIRTIO_BALLOON_F_PAGE_POISON);
 
 	__virtio_clear_bit(vdev, VIRTIO_F_IOMMU_PLATFORM);
@@ -1058,6 +1123,7 @@ static unsigned int features[] = {
 	VIRTIO_BALLOON_F_DEFLATE_ON_OOM,
 	VIRTIO_BALLOON_F_FREE_PAGE_HINT,
 	VIRTIO_BALLOON_F_PAGE_POISON,
+	VIRTIO_BALLOON_F_REPORTING,
 };
 
 static struct virtio_driver virtio_balloon_driver = {
diff --git a/drivers/virtio/virtio_vdpa.c b/drivers/virtio/virtio_vdpa.c
new file mode 100644
index 0000000..c30eb55
--- /dev/null
+++ b/drivers/virtio/virtio_vdpa.c
@@ -0,0 +1,396 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * VIRTIO based driver for vDPA device
+ *
+ * Copyright (c) 2020, Red Hat. All rights reserved.
+ *     Author: Jason Wang <jasowang@redhat.com>
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/uuid.h>
+#include <linux/virtio.h>
+#include <linux/vdpa.h>
+#include <linux/virtio_config.h>
+#include <linux/virtio_ring.h>
+
+#define MOD_VERSION  "0.1"
+#define MOD_AUTHOR   "Jason Wang <jasowang@redhat.com>"
+#define MOD_DESC     "vDPA bus driver for virtio devices"
+#define MOD_LICENSE  "GPL v2"
+
+struct virtio_vdpa_device {
+	struct virtio_device vdev;
+	struct vdpa_device *vdpa;
+	u64 features;
+
+	/* The lock to protect virtqueue list */
+	spinlock_t lock;
+	/* List of virtio_vdpa_vq_info */
+	struct list_head virtqueues;
+};
+
+struct virtio_vdpa_vq_info {
+	/* the actual virtqueue */
+	struct virtqueue *vq;
+
+	/* the list node for the virtqueues list */
+	struct list_head node;
+};
+
+static inline struct virtio_vdpa_device *
+to_virtio_vdpa_device(struct virtio_device *dev)
+{
+	return container_of(dev, struct virtio_vdpa_device, vdev);
+}
+
+static struct vdpa_device *vd_get_vdpa(struct virtio_device *vdev)
+{
+	return to_virtio_vdpa_device(vdev)->vdpa;
+}
+
+static void virtio_vdpa_get(struct virtio_device *vdev, unsigned offset,
+			    void *buf, unsigned len)
+{
+	struct vdpa_device *vdpa = vd_get_vdpa(vdev);
+	const struct vdpa_config_ops *ops = vdpa->config;
+
+	ops->get_config(vdpa, offset, buf, len);
+}
+
+static void virtio_vdpa_set(struct virtio_device *vdev, unsigned offset,
+			    const void *buf, unsigned len)
+{
+	struct vdpa_device *vdpa = vd_get_vdpa(vdev);
+	const struct vdpa_config_ops *ops = vdpa->config;
+
+	ops->set_config(vdpa, offset, buf, len);
+}
+
+static u32 virtio_vdpa_generation(struct virtio_device *vdev)
+{
+	struct vdpa_device *vdpa = vd_get_vdpa(vdev);
+	const struct vdpa_config_ops *ops = vdpa->config;
+
+	if (ops->get_generation)
+		return ops->get_generation(vdpa);
+
+	return 0;
+}
+
+static u8 virtio_vdpa_get_status(struct virtio_device *vdev)
+{
+	struct vdpa_device *vdpa = vd_get_vdpa(vdev);
+	const struct vdpa_config_ops *ops = vdpa->config;
+
+	return ops->get_status(vdpa);
+}
+
+static void virtio_vdpa_set_status(struct virtio_device *vdev, u8 status)
+{
+	struct vdpa_device *vdpa = vd_get_vdpa(vdev);
+	const struct vdpa_config_ops *ops = vdpa->config;
+
+	return ops->set_status(vdpa, status);
+}
+
+static void virtio_vdpa_reset(struct virtio_device *vdev)
+{
+	struct vdpa_device *vdpa = vd_get_vdpa(vdev);
+	const struct vdpa_config_ops *ops = vdpa->config;
+
+	return ops->set_status(vdpa, 0);
+}
+
+static bool virtio_vdpa_notify(struct virtqueue *vq)
+{
+	struct vdpa_device *vdpa = vd_get_vdpa(vq->vdev);
+	const struct vdpa_config_ops *ops = vdpa->config;
+
+	ops->kick_vq(vdpa, vq->index);
+
+	return true;
+}
+
+static irqreturn_t virtio_vdpa_config_cb(void *private)
+{
+	struct virtio_vdpa_device *vd_dev = private;
+
+	virtio_config_changed(&vd_dev->vdev);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t virtio_vdpa_virtqueue_cb(void *private)
+{
+	struct virtio_vdpa_vq_info *info = private;
+
+	return vring_interrupt(0, info->vq);
+}
+
+static struct virtqueue *
+virtio_vdpa_setup_vq(struct virtio_device *vdev, unsigned int index,
+		     void (*callback)(struct virtqueue *vq),
+		     const char *name, bool ctx)
+{
+	struct virtio_vdpa_device *vd_dev = to_virtio_vdpa_device(vdev);
+	struct vdpa_device *vdpa = vd_get_vdpa(vdev);
+	const struct vdpa_config_ops *ops = vdpa->config;
+	struct virtio_vdpa_vq_info *info;
+	struct vdpa_callback cb;
+	struct virtqueue *vq;
+	u64 desc_addr, driver_addr, device_addr;
+	unsigned long flags;
+	u32 align, num;
+	int err;
+
+	if (!name)
+		return NULL;
+
+	/* Queue shouldn't already be set up. */
+	if (ops->get_vq_ready(vdpa, index))
+		return ERR_PTR(-ENOENT);
+
+	/* Allocate and fill out our active queue description */
+	info = kmalloc(sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return ERR_PTR(-ENOMEM);
+
+	num = ops->get_vq_num_max(vdpa);
+	if (num == 0) {
+		err = -ENOENT;
+		goto error_new_virtqueue;
+	}
+
+	/* Create the vring */
+	align = ops->get_vq_align(vdpa);
+	vq = vring_create_virtqueue(index, num, align, vdev,
+				    true, true, ctx,
+				    virtio_vdpa_notify, callback, name);
+	if (!vq) {
+		err = -ENOMEM;
+		goto error_new_virtqueue;
+	}
+
+	/* Setup virtqueue callback */
+	cb.callback = virtio_vdpa_virtqueue_cb;
+	cb.private = info;
+	ops->set_vq_cb(vdpa, index, &cb);
+	ops->set_vq_num(vdpa, index, virtqueue_get_vring_size(vq));
+
+	desc_addr = virtqueue_get_desc_addr(vq);
+	driver_addr = virtqueue_get_avail_addr(vq);
+	device_addr = virtqueue_get_used_addr(vq);
+
+	if (ops->set_vq_address(vdpa, index,
+				desc_addr, driver_addr,
+				device_addr)) {
+		err = -EINVAL;
+		goto err_vq;
+	}
+
+	ops->set_vq_ready(vdpa, index, 1);
+
+	vq->priv = info;
+	info->vq = vq;
+
+	spin_lock_irqsave(&vd_dev->lock, flags);
+	list_add(&info->node, &vd_dev->virtqueues);
+	spin_unlock_irqrestore(&vd_dev->lock, flags);
+
+	return vq;
+
+err_vq:
+	vring_del_virtqueue(vq);
+error_new_virtqueue:
+	ops->set_vq_ready(vdpa, index, 0);
+	/* VDPA driver should make sure vq is stopeed here */
+	WARN_ON(ops->get_vq_ready(vdpa, index));
+	kfree(info);
+	return ERR_PTR(err);
+}
+
+static void virtio_vdpa_del_vq(struct virtqueue *vq)
+{
+	struct virtio_vdpa_device *vd_dev = to_virtio_vdpa_device(vq->vdev);
+	struct vdpa_device *vdpa = vd_dev->vdpa;
+	const struct vdpa_config_ops *ops = vdpa->config;
+	struct virtio_vdpa_vq_info *info = vq->priv;
+	unsigned int index = vq->index;
+	unsigned long flags;
+
+	spin_lock_irqsave(&vd_dev->lock, flags);
+	list_del(&info->node);
+	spin_unlock_irqrestore(&vd_dev->lock, flags);
+
+	/* Select and deactivate the queue */
+	ops->set_vq_ready(vdpa, index, 0);
+	WARN_ON(ops->get_vq_ready(vdpa, index));
+
+	vring_del_virtqueue(vq);
+
+	kfree(info);
+}
+
+static void virtio_vdpa_del_vqs(struct virtio_device *vdev)
+{
+	struct virtqueue *vq, *n;
+
+	list_for_each_entry_safe(vq, n, &vdev->vqs, list)
+		virtio_vdpa_del_vq(vq);
+}
+
+static int virtio_vdpa_find_vqs(struct virtio_device *vdev, unsigned nvqs,
+				struct virtqueue *vqs[],
+				vq_callback_t *callbacks[],
+				const char * const names[],
+				const bool *ctx,
+				struct irq_affinity *desc)
+{
+	struct virtio_vdpa_device *vd_dev = to_virtio_vdpa_device(vdev);
+	struct vdpa_device *vdpa = vd_get_vdpa(vdev);
+	const struct vdpa_config_ops *ops = vdpa->config;
+	struct vdpa_callback cb;
+	int i, err, queue_idx = 0;
+
+	for (i = 0; i < nvqs; ++i) {
+		if (!names[i]) {
+			vqs[i] = NULL;
+			continue;
+		}
+
+		vqs[i] = virtio_vdpa_setup_vq(vdev, queue_idx++,
+					      callbacks[i], names[i], ctx ?
+					      ctx[i] : false);
+		if (IS_ERR(vqs[i])) {
+			err = PTR_ERR(vqs[i]);
+			goto err_setup_vq;
+		}
+	}
+
+	cb.callback = virtio_vdpa_config_cb;
+	cb.private = vd_dev;
+	ops->set_config_cb(vdpa, &cb);
+
+	return 0;
+
+err_setup_vq:
+	virtio_vdpa_del_vqs(vdev);
+	return err;
+}
+
+static u64 virtio_vdpa_get_features(struct virtio_device *vdev)
+{
+	struct vdpa_device *vdpa = vd_get_vdpa(vdev);
+	const struct vdpa_config_ops *ops = vdpa->config;
+
+	return ops->get_features(vdpa);
+}
+
+static int virtio_vdpa_finalize_features(struct virtio_device *vdev)
+{
+	struct vdpa_device *vdpa = vd_get_vdpa(vdev);
+	const struct vdpa_config_ops *ops = vdpa->config;
+
+	/* Give virtio_ring a chance to accept features. */
+	vring_transport_features(vdev);
+
+	return ops->set_features(vdpa, vdev->features);
+}
+
+static const char *virtio_vdpa_bus_name(struct virtio_device *vdev)
+{
+	struct virtio_vdpa_device *vd_dev = to_virtio_vdpa_device(vdev);
+	struct vdpa_device *vdpa = vd_dev->vdpa;
+
+	return dev_name(&vdpa->dev);
+}
+
+static const struct virtio_config_ops virtio_vdpa_config_ops = {
+	.get		= virtio_vdpa_get,
+	.set		= virtio_vdpa_set,
+	.generation	= virtio_vdpa_generation,
+	.get_status	= virtio_vdpa_get_status,
+	.set_status	= virtio_vdpa_set_status,
+	.reset		= virtio_vdpa_reset,
+	.find_vqs	= virtio_vdpa_find_vqs,
+	.del_vqs	= virtio_vdpa_del_vqs,
+	.get_features	= virtio_vdpa_get_features,
+	.finalize_features = virtio_vdpa_finalize_features,
+	.bus_name	= virtio_vdpa_bus_name,
+};
+
+static void virtio_vdpa_release_dev(struct device *_d)
+{
+	struct virtio_device *vdev =
+	       container_of(_d, struct virtio_device, dev);
+	struct virtio_vdpa_device *vd_dev =
+	       container_of(vdev, struct virtio_vdpa_device, vdev);
+
+	kfree(vd_dev);
+}
+
+static int virtio_vdpa_probe(struct vdpa_device *vdpa)
+{
+	const struct vdpa_config_ops *ops = vdpa->config;
+	struct virtio_vdpa_device *vd_dev, *reg_dev = NULL;
+	int ret = -EINVAL;
+
+	vd_dev = kzalloc(sizeof(*vd_dev), GFP_KERNEL);
+	if (!vd_dev)
+		return -ENOMEM;
+
+	vd_dev->vdev.dev.parent = vdpa_get_dma_dev(vdpa);
+	vd_dev->vdev.dev.release = virtio_vdpa_release_dev;
+	vd_dev->vdev.config = &virtio_vdpa_config_ops;
+	vd_dev->vdpa = vdpa;
+	INIT_LIST_HEAD(&vd_dev->virtqueues);
+	spin_lock_init(&vd_dev->lock);
+
+	vd_dev->vdev.id.device = ops->get_device_id(vdpa);
+	if (vd_dev->vdev.id.device == 0)
+		goto err;
+
+	vd_dev->vdev.id.vendor = ops->get_vendor_id(vdpa);
+	ret = register_virtio_device(&vd_dev->vdev);
+	reg_dev = vd_dev;
+	if (ret)
+		goto err;
+
+	vdpa_set_drvdata(vdpa, vd_dev);
+
+	return 0;
+
+err:
+	if (reg_dev)
+		put_device(&vd_dev->vdev.dev);
+	else
+		kfree(vd_dev);
+	return ret;
+}
+
+static void virtio_vdpa_remove(struct vdpa_device *vdpa)
+{
+	struct virtio_vdpa_device *vd_dev = vdpa_get_drvdata(vdpa);
+
+	unregister_virtio_device(&vd_dev->vdev);
+}
+
+static struct vdpa_driver virtio_vdpa_driver = {
+	.driver = {
+		.name	= "virtio_vdpa",
+	},
+	.probe	= virtio_vdpa_probe,
+	.remove = virtio_vdpa_remove,
+};
+
+module_vdpa_driver(virtio_vdpa_driver);
+
+MODULE_VERSION(MOD_VERSION);
+MODULE_LICENSE(MOD_LICENSE);
+MODULE_AUTHOR(MOD_AUTHOR);
+MODULE_DESCRIPTION(MOD_DESC);
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 9ea2b43..0663c60 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -584,6 +584,14 @@
 	  NOTE: once enabled, this timer cannot be disabled.
 	  Say N if you are unsure.
 
+config K3_RTI_WATCHDOG
+	tristate "Texas Instruments K3 RTI watchdog"
+	depends on ARCH_K3 || COMPILE_TEST
+	select WATCHDOG_CORE
+	help
+	  Say Y here if you want to include support for the K3 watchdog
+	  timer (RTI module) available in the K3 generation of processors.
+
 config ORION_WATCHDOG
 	tristate "Orion watchdog"
 	depends on ARCH_ORION5X || ARCH_DOVE || MACH_DOVE || ARCH_MVEBU || (COMPILE_TEST && !ARCH_EBSA110)
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 2ee352b..6de2e4c 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -57,6 +57,7 @@
 obj-$(CONFIG_PNX4008_WATCHDOG) += pnx4008_wdt.o
 obj-$(CONFIG_IOP_WATCHDOG) += iop_wdt.o
 obj-$(CONFIG_DAVINCI_WATCHDOG) += davinci_wdt.o
+obj-$(CONFIG_K3_RTI_WATCHDOG) += rti_wdt.o
 obj-$(CONFIG_ORION_WATCHDOG) += orion_wdt.o
 obj-$(CONFIG_SUNXI_WATCHDOG) += sunxi_wdt.o
 obj-$(CONFIG_RN5T618_WATCHDOG) += rn5t618_wdt.o
diff --git a/drivers/watchdog/imx2_wdt.c b/drivers/watchdog/imx2_wdt.c
index f8d58bf..1fe472f 100644
--- a/drivers/watchdog/imx2_wdt.c
+++ b/drivers/watchdog/imx2_wdt.c
@@ -244,6 +244,11 @@ static const struct regmap_config imx2_wdt_regmap_config = {
 	.max_register = 0x8,
 };
 
+static void imx2_wdt_action(void *data)
+{
+	clk_disable_unprepare(data);
+}
+
 static int __init imx2_wdt_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -292,6 +297,10 @@ static int __init imx2_wdt_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	ret = devm_add_action_or_reset(dev, imx2_wdt_action, wdev->clk);
+	if (ret)
+		return ret;
+
 	regmap_read(wdev->regmap, IMX2_WDT_WRSR, &val);
 	wdog->bootstatus = val & IMX2_WDT_WRSR_TOUT ? WDIOF_CARDRESET : 0;
 
@@ -315,32 +324,7 @@ static int __init imx2_wdt_probe(struct platform_device *pdev)
 	 */
 	regmap_write(wdev->regmap, IMX2_WDT_WMCR, 0);
 
-	ret = watchdog_register_device(wdog);
-	if (ret)
-		goto disable_clk;
-
-	dev_info(dev, "timeout %d sec (nowayout=%d)\n",
-		 wdog->timeout, nowayout);
-
-	return 0;
-
-disable_clk:
-	clk_disable_unprepare(wdev->clk);
-	return ret;
-}
-
-static int __exit imx2_wdt_remove(struct platform_device *pdev)
-{
-	struct watchdog_device *wdog = platform_get_drvdata(pdev);
-	struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog);
-
-	watchdog_unregister_device(wdog);
-
-	if (imx2_wdt_is_running(wdev)) {
-		imx2_wdt_ping(wdog);
-		dev_crit(&pdev->dev, "Device removed: Expect reboot!\n");
-	}
-	return 0;
+	return devm_watchdog_register_device(dev, wdog);
 }
 
 static void imx2_wdt_shutdown(struct platform_device *pdev)
@@ -417,7 +401,6 @@ static const struct of_device_id imx2_wdt_dt_ids[] = {
 MODULE_DEVICE_TABLE(of, imx2_wdt_dt_ids);
 
 static struct platform_driver imx2_wdt_driver = {
-	.remove		= __exit_p(imx2_wdt_remove),
 	.shutdown	= imx2_wdt_shutdown,
 	.driver		= {
 		.name	= DRIVER_NAME,
diff --git a/drivers/watchdog/imx7ulp_wdt.c b/drivers/watchdog/imx7ulp_wdt.c
index 11b9e7c..7993c8c 100644
--- a/drivers/watchdog/imx7ulp_wdt.c
+++ b/drivers/watchdog/imx7ulp_wdt.c
@@ -4,7 +4,6 @@
  */
 
 #include <linux/clk.h>
-#include <linux/init.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
diff --git a/drivers/watchdog/imx_sc_wdt.c b/drivers/watchdog/imx_sc_wdt.c
index 8ed89f0..60a3246 100644
--- a/drivers/watchdog/imx_sc_wdt.c
+++ b/drivers/watchdog/imx_sc_wdt.c
@@ -6,13 +6,11 @@
 #include <linux/arm-smccc.h>
 #include <linux/firmware/imx/sci.h>
 #include <linux/io.h>
-#include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
-#include <linux/reboot.h>
 #include <linux/watchdog.h>
 
 #define DEFAULT_TIMEOUT 60
diff --git a/drivers/watchdog/npcm_wdt.c b/drivers/watchdog/npcm_wdt.c
index 9c773c3..765577f 100644
--- a/drivers/watchdog/npcm_wdt.c
+++ b/drivers/watchdog/npcm_wdt.c
@@ -103,30 +103,29 @@ static int npcm_wdt_stop(struct watchdog_device *wdd)
 	return 0;
 }
 
-
 static int npcm_wdt_set_timeout(struct watchdog_device *wdd,
 				unsigned int timeout)
 {
 	if (timeout < 2)
 		wdd->timeout = 1;
 	else if (timeout < 3)
-	      wdd->timeout = 2;
+		wdd->timeout = 2;
 	else if (timeout < 6)
-	      wdd->timeout = 5;
+		wdd->timeout = 5;
 	else if (timeout < 11)
-	      wdd->timeout = 10;
+		wdd->timeout = 10;
 	else if (timeout < 22)
-	      wdd->timeout = 21;
+		wdd->timeout = 21;
 	else if (timeout < 44)
-	      wdd->timeout = 43;
+		wdd->timeout = 43;
 	else if (timeout < 87)
-	      wdd->timeout = 86;
+		wdd->timeout = 86;
 	else if (timeout < 173)
-	      wdd->timeout = 172;
+		wdd->timeout = 172;
 	else if (timeout < 688)
-	      wdd->timeout = 687;
+		wdd->timeout = 687;
 	else
-	      wdd->timeout = 2750;
+		wdd->timeout = 2750;
 
 	if (watchdog_active(wdd))
 		npcm_wdt_start(wdd);
diff --git a/drivers/watchdog/orion_wdt.c b/drivers/watchdog/orion_wdt.c
index 8e6dfe7..4ddb4ea 100644
--- a/drivers/watchdog/orion_wdt.c
+++ b/drivers/watchdog/orion_wdt.c
@@ -52,7 +52,7 @@
 #define WDT_A370_RATIO		(1 << WDT_A370_RATIO_SHIFT)
 
 static bool nowayout = WATCHDOG_NOWAYOUT;
-static int heartbeat = -1;		/* module parameter (seconds) */
+static int heartbeat;		/* module parameter (seconds) */
 
 struct orion_watchdog;
 
diff --git a/drivers/watchdog/pm8916_wdt.c b/drivers/watchdog/pm8916_wdt.c
index 1213179..0937b8d3 100644
--- a/drivers/watchdog/pm8916_wdt.c
+++ b/drivers/watchdog/pm8916_wdt.c
@@ -192,6 +192,7 @@ static int pm8916_wdt_probe(struct platform_device *pdev)
 	wdt->wdev.timeout = PM8916_WDT_DEFAULT_TIMEOUT;
 	wdt->wdev.pretimeout = 0;
 	watchdog_set_drvdata(&wdt->wdev, wdt);
+	platform_set_drvdata(pdev, wdt);
 
 	watchdog_init_timeout(&wdt->wdev, 0, dev);
 	pm8916_wdt_configure_timers(&wdt->wdev);
@@ -199,6 +200,29 @@ static int pm8916_wdt_probe(struct platform_device *pdev)
 	return devm_watchdog_register_device(dev, &wdt->wdev);
 }
 
+static int __maybe_unused pm8916_wdt_suspend(struct device *dev)
+{
+	struct pm8916_wdt *wdt = dev_get_drvdata(dev);
+
+	if (watchdog_active(&wdt->wdev))
+		return pm8916_wdt_stop(&wdt->wdev);
+
+	return 0;
+}
+
+static int __maybe_unused pm8916_wdt_resume(struct device *dev)
+{
+	struct pm8916_wdt *wdt = dev_get_drvdata(dev);
+
+	if (watchdog_active(&wdt->wdev))
+		return pm8916_wdt_start(&wdt->wdev);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(pm8916_wdt_pm_ops, pm8916_wdt_suspend,
+			 pm8916_wdt_resume);
+
 static const struct of_device_id pm8916_wdt_id_table[] = {
 	{ .compatible = "qcom,pm8916-wdt" },
 	{ }
@@ -210,6 +234,7 @@ static struct platform_driver pm8916_wdt_driver = {
 	.driver = {
 		.name = "pm8916-wdt",
 		.of_match_table = of_match_ptr(pm8916_wdt_id_table),
+		.pm = &pm8916_wdt_pm_ops,
 	},
 };
 module_platform_driver(pm8916_wdt_driver);
diff --git a/drivers/watchdog/qcom-wdt.c b/drivers/watchdog/qcom-wdt.c
index eb47fe5..ab7465d 100644
--- a/drivers/watchdog/qcom-wdt.c
+++ b/drivers/watchdog/qcom-wdt.c
@@ -40,6 +40,11 @@ static const u32 reg_offset_data_kpss[] = {
 	[WDT_BITE_TIME] = 0x14,
 };
 
+struct qcom_wdt_match_data {
+	const u32 *offset;
+	bool pretimeout;
+};
+
 struct qcom_wdt {
 	struct watchdog_device	wdd;
 	unsigned long		rate;
@@ -179,19 +184,29 @@ static void qcom_clk_disable_unprepare(void *data)
 	clk_disable_unprepare(data);
 }
 
+static const struct qcom_wdt_match_data match_data_apcs_tmr = {
+	.offset = reg_offset_data_apcs_tmr,
+	.pretimeout = false,
+};
+
+static const struct qcom_wdt_match_data match_data_kpss = {
+	.offset = reg_offset_data_kpss,
+	.pretimeout = true,
+};
+
 static int qcom_wdt_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct qcom_wdt *wdt;
 	struct resource *res;
 	struct device_node *np = dev->of_node;
-	const u32 *regs;
+	const struct qcom_wdt_match_data *data;
 	u32 percpu_offset;
 	int irq, ret;
 	struct clk *clk;
 
-	regs = of_device_get_match_data(dev);
-	if (!regs) {
+	data = of_device_get_match_data(dev);
+	if (!data) {
 		dev_err(dev, "Unsupported QCOM WDT module\n");
 		return -ENODEV;
 	}
@@ -247,9 +262,8 @@ static int qcom_wdt_probe(struct platform_device *pdev)
 
 	/* check if there is pretimeout support */
 	irq = platform_get_irq_optional(pdev, 0);
-	if (irq > 0) {
-		ret = devm_request_irq(dev, irq, qcom_wdt_isr,
-				       IRQF_TRIGGER_RISING,
+	if (data->pretimeout && irq > 0) {
+		ret = devm_request_irq(dev, irq, qcom_wdt_isr, 0,
 				       "wdt_bark", &wdt->wdd);
 		if (ret)
 			return ret;
@@ -267,7 +281,7 @@ static int qcom_wdt_probe(struct platform_device *pdev)
 	wdt->wdd.min_timeout = 1;
 	wdt->wdd.max_timeout = 0x10000000U / wdt->rate;
 	wdt->wdd.parent = dev;
-	wdt->layout = regs;
+	wdt->layout = data->offset;
 
 	if (readl(wdt_addr(wdt, WDT_STS)) & 1)
 		wdt->wdd.bootstatus = WDIOF_CARDRESET;
@@ -311,9 +325,9 @@ static int __maybe_unused qcom_wdt_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(qcom_wdt_pm_ops, qcom_wdt_suspend, qcom_wdt_resume);
 
 static const struct of_device_id qcom_wdt_of_table[] = {
-	{ .compatible = "qcom,kpss-timer", .data = reg_offset_data_apcs_tmr },
-	{ .compatible = "qcom,scss-timer", .data = reg_offset_data_apcs_tmr },
-	{ .compatible = "qcom,kpss-wdt", .data = reg_offset_data_kpss },
+	{ .compatible = "qcom,kpss-timer", .data = &match_data_apcs_tmr },
+	{ .compatible = "qcom,scss-timer", .data = &match_data_apcs_tmr },
+	{ .compatible = "qcom,kpss-wdt", .data = &match_data_kpss },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, qcom_wdt_of_table);
diff --git a/drivers/watchdog/rti_wdt.c b/drivers/watchdog/rti_wdt.c
new file mode 100644
index 0000000..d456dd7
--- /dev/null
+++ b/drivers/watchdog/rti_wdt.c
@@ -0,0 +1,255 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Watchdog driver for the K3 RTI module
+ *
+ * (c) Copyright 2019-2020 Texas Instruments Inc.
+ * All rights reserved.
+ */
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/types.h>
+#include <linux/watchdog.h>
+
+#define DEFAULT_HEARTBEAT 60
+
+/* Max heartbeat is calculated at 32kHz source clock */
+#define MAX_HEARTBEAT	1000
+
+/* Timer register set definition */
+#define RTIDWDCTRL	0x90
+#define RTIDWDPRLD	0x94
+#define RTIWDSTATUS	0x98
+#define RTIWDKEY	0x9c
+#define RTIDWDCNTR	0xa0
+#define RTIWWDRXCTRL	0xa4
+#define RTIWWDSIZECTRL	0xa8
+
+#define RTIWWDRX_NMI	0xa
+
+#define RTIWWDSIZE_50P	0x50
+
+#define WDENABLE_KEY	0xa98559da
+
+#define WDKEY_SEQ0		0xe51a
+#define WDKEY_SEQ1		0xa35c
+
+#define WDT_PRELOAD_SHIFT	13
+
+#define WDT_PRELOAD_MAX		0xfff
+
+#define DWDST			BIT(1)
+
+static int heartbeat;
+
+/*
+ * struct to hold data for each WDT device
+ * @base - base io address of WD device
+ * @freq - source clock frequency of WDT
+ * @wdd  - hold watchdog device as is in WDT core
+ */
+struct rti_wdt_device {
+	void __iomem		*base;
+	unsigned long		freq;
+	struct watchdog_device	wdd;
+};
+
+static int rti_wdt_start(struct watchdog_device *wdd)
+{
+	u32 timer_margin;
+	struct rti_wdt_device *wdt = watchdog_get_drvdata(wdd);
+
+	/* set timeout period */
+	timer_margin = (u64)wdd->timeout * wdt->freq;
+	timer_margin >>= WDT_PRELOAD_SHIFT;
+	if (timer_margin > WDT_PRELOAD_MAX)
+		timer_margin = WDT_PRELOAD_MAX;
+	writel_relaxed(timer_margin, wdt->base + RTIDWDPRLD);
+
+	/*
+	 * RTI only supports a windowed mode, where the watchdog can only
+	 * be petted during the open window; not too early or not too late.
+	 * The HW configuration options only allow for the open window size
+	 * to be 50% or less than that; we obviouly want to configure the open
+	 * window as large as possible so we select the 50% option. To avoid
+	 * any glitches, we accommodate 5% safety margin also, so we setup
+	 * the min_hw_hearbeat at 55% of the timeout period.
+	 */
+	wdd->min_hw_heartbeat_ms = 11 * wdd->timeout * 1000 / 20;
+
+	/* Generate NMI when wdt expires */
+	writel_relaxed(RTIWWDRX_NMI, wdt->base + RTIWWDRXCTRL);
+
+	/* Open window size 50%; this is the largest window size available */
+	writel_relaxed(RTIWWDSIZE_50P, wdt->base + RTIWWDSIZECTRL);
+
+	readl_relaxed(wdt->base + RTIWWDSIZECTRL);
+
+	/* enable watchdog */
+	writel_relaxed(WDENABLE_KEY, wdt->base + RTIDWDCTRL);
+	return 0;
+}
+
+static int rti_wdt_ping(struct watchdog_device *wdd)
+{
+	struct rti_wdt_device *wdt = watchdog_get_drvdata(wdd);
+
+	/* put watchdog in service state */
+	writel_relaxed(WDKEY_SEQ0, wdt->base + RTIWDKEY);
+	/* put watchdog in active state */
+	writel_relaxed(WDKEY_SEQ1, wdt->base + RTIWDKEY);
+
+	return 0;
+}
+
+static unsigned int rti_wdt_get_timeleft(struct watchdog_device *wdd)
+{
+	u64 timer_counter;
+	u32 val;
+	struct rti_wdt_device *wdt = watchdog_get_drvdata(wdd);
+
+	/* if timeout has occurred then return 0 */
+	val = readl_relaxed(wdt->base + RTIWDSTATUS);
+	if (val & DWDST)
+		return 0;
+
+	timer_counter = readl_relaxed(wdt->base + RTIDWDCNTR);
+
+	do_div(timer_counter, wdt->freq);
+
+	return timer_counter;
+}
+
+static const struct watchdog_info rti_wdt_info = {
+	.options = WDIOF_KEEPALIVEPING,
+	.identity = "K3 RTI Watchdog",
+};
+
+static const struct watchdog_ops rti_wdt_ops = {
+	.owner		= THIS_MODULE,
+	.start		= rti_wdt_start,
+	.ping		= rti_wdt_ping,
+	.get_timeleft	= rti_wdt_get_timeleft,
+};
+
+static int rti_wdt_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+	struct device *dev = &pdev->dev;
+	struct resource *wdt_mem;
+	struct watchdog_device *wdd;
+	struct rti_wdt_device *wdt;
+	struct clk *clk;
+
+	wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
+	if (!wdt)
+		return -ENOMEM;
+
+	clk = clk_get(dev, NULL);
+	if (IS_ERR(clk)) {
+		if (PTR_ERR(clk) != -EPROBE_DEFER)
+			dev_err(dev, "failed to get clock\n");
+		return PTR_ERR(clk);
+	}
+
+	wdt->freq = clk_get_rate(clk);
+
+	clk_put(clk);
+
+	if (!wdt->freq) {
+		dev_err(dev, "Failed to get fck rate.\n");
+		return -EINVAL;
+	}
+
+	pm_runtime_enable(dev);
+	ret = pm_runtime_get_sync(dev);
+	if (ret) {
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "runtime pm failed\n");
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, wdt);
+
+	wdd = &wdt->wdd;
+	wdd->info = &rti_wdt_info;
+	wdd->ops = &rti_wdt_ops;
+	wdd->min_timeout = 1;
+	wdd->max_hw_heartbeat_ms = (WDT_PRELOAD_MAX << WDT_PRELOAD_SHIFT) /
+		wdt->freq * 1000;
+	wdd->timeout = DEFAULT_HEARTBEAT;
+	wdd->parent = dev;
+
+	watchdog_init_timeout(wdd, heartbeat, dev);
+
+	watchdog_set_drvdata(wdd, wdt);
+	watchdog_set_nowayout(wdd, 1);
+	watchdog_set_restart_priority(wdd, 128);
+
+	wdt_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	wdt->base = devm_ioremap_resource(dev, wdt_mem);
+	if (IS_ERR(wdt->base)) {
+		ret = PTR_ERR(wdt->base);
+		goto err_iomap;
+	}
+
+	ret = watchdog_register_device(wdd);
+	if (ret) {
+		dev_err(dev, "cannot register watchdog device\n");
+		goto err_iomap;
+	}
+
+	return 0;
+
+err_iomap:
+	pm_runtime_put_sync(&pdev->dev);
+
+	return ret;
+}
+
+static int rti_wdt_remove(struct platform_device *pdev)
+{
+	struct rti_wdt_device *wdt = platform_get_drvdata(pdev);
+
+	watchdog_unregister_device(&wdt->wdd);
+	pm_runtime_put(&pdev->dev);
+
+	return 0;
+}
+
+static const struct of_device_id rti_wdt_of_match[] = {
+	{ .compatible = "ti,j7-rti-wdt", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, rti_wdt_of_match);
+
+static struct platform_driver rti_wdt_driver = {
+	.driver = {
+		.name = "rti-wdt",
+		.of_match_table = rti_wdt_of_match,
+	},
+	.probe = rti_wdt_probe,
+	.remove = rti_wdt_remove,
+};
+
+module_platform_driver(rti_wdt_driver);
+
+MODULE_AUTHOR("Tero Kristo <t-kristo@ti.com>");
+MODULE_DESCRIPTION("K3 RTI Watchdog Driver");
+
+module_param(heartbeat, int, 0);
+MODULE_PARM_DESC(heartbeat,
+		 "Watchdog heartbeat period in seconds from 1 to "
+		 __MODULE_STRING(MAX_HEARTBEAT) ", default "
+		 __MODULE_STRING(DEFAULT_HEARTBEAT));
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:rti-wdt");
diff --git a/drivers/watchdog/sp805_wdt.c b/drivers/watchdog/sp805_wdt.c
index 53e0492..190d26e 100644
--- a/drivers/watchdog/sp805_wdt.c
+++ b/drivers/watchdog/sp805_wdt.c
@@ -137,10 +137,14 @@ wdt_restart(struct watchdog_device *wdd, unsigned long mode, void *cmd)
 {
 	struct sp805_wdt *wdt = watchdog_get_drvdata(wdd);
 
+	writel_relaxed(UNLOCK, wdt->base + WDTLOCK);
 	writel_relaxed(0, wdt->base + WDTCONTROL);
 	writel_relaxed(0, wdt->base + WDTLOAD);
 	writel_relaxed(INT_ENABLE | RESET_ENABLE, wdt->base + WDTCONTROL);
 
+	/* Flush posted writes. */
+	readl_relaxed(wdt->base + WDTLOCK);
+
 	return 0;
 }
 
diff --git a/drivers/watchdog/watchdog_core.c b/drivers/watchdog/watchdog_core.c
index 861daf4..4238447 100644
--- a/drivers/watchdog/watchdog_core.c
+++ b/drivers/watchdog/watchdog_core.c
@@ -39,6 +39,10 @@
 
 static DEFINE_IDA(watchdog_ida);
 
+static int stop_on_reboot = -1;
+module_param(stop_on_reboot, int, 0444);
+MODULE_PARM_DESC(stop_on_reboot, "Stop watchdogs on reboot (0=keep watching, 1=stop)");
+
 /*
  * Deferred Registration infrastructure.
  *
@@ -254,6 +258,14 @@ static int __watchdog_register_device(struct watchdog_device *wdd)
 		}
 	}
 
+	/* Module parameter to force watchdog policy on reboot. */
+	if (stop_on_reboot != -1) {
+		if (stop_on_reboot)
+			set_bit(WDOG_STOP_ON_REBOOT, &wdd->status);
+		else
+			clear_bit(WDOG_STOP_ON_REBOOT, &wdd->status);
+	}
+
 	if (test_bit(WDOG_STOP_ON_REBOOT, &wdd->status)) {
 		wdd->reboot_nb.notifier_call = watchdog_reboot_notifier;
 
diff --git a/drivers/watchdog/watchdog_dev.c b/drivers/watchdog/watchdog_dev.c
index 8b5c742..7e4cd34 100644
--- a/drivers/watchdog/watchdog_dev.c
+++ b/drivers/watchdog/watchdog_dev.c
@@ -282,6 +282,7 @@ static int watchdog_start(struct watchdog_device *wdd)
 	if (err == 0) {
 		set_bit(WDOG_ACTIVE, &wdd->status);
 		wd_data->last_keepalive = started_at;
+		wd_data->last_hw_keepalive = started_at;
 		watchdog_update_worker(wdd);
 	}
 
diff --git a/drivers/watchdog/wm831x_wdt.c b/drivers/watchdog/wm831x_wdt.c
index 030ce24..d96ad8f 100644
--- a/drivers/watchdog/wm831x_wdt.c
+++ b/drivers/watchdog/wm831x_wdt.c
@@ -13,7 +13,6 @@
 #include <linux/platform_device.h>
 #include <linux/watchdog.h>
 #include <linux/uaccess.h>
-#include <linux/gpio.h>
 
 #include <linux/mfd/wm831x/core.h>
 #include <linux/mfd/wm831x/pdata.h>
@@ -29,7 +28,6 @@ struct wm831x_wdt_drvdata {
 	struct watchdog_device wdt;
 	struct wm831x *wm831x;
 	struct mutex lock;
-	int update_gpio;
 	int update_state;
 };
 
@@ -103,14 +101,6 @@ static int wm831x_wdt_ping(struct watchdog_device *wdt_dev)
 
 	mutex_lock(&driver_data->lock);
 
-	if (driver_data->update_gpio) {
-		gpio_set_value_cansleep(driver_data->update_gpio,
-					driver_data->update_state);
-		driver_data->update_state = !driver_data->update_state;
-		ret = 0;
-		goto out;
-	}
-
 	reg = wm831x_reg_read(wm831x, WM831X_WATCHDOG);
 
 	if (!(reg & WM831X_WDOG_RST_SRC)) {
@@ -239,23 +229,6 @@ static int wm831x_wdt_probe(struct platform_device *pdev)
 		reg |= pdata->secondary << WM831X_WDOG_SECACT_SHIFT;
 		reg |= pdata->software << WM831X_WDOG_RST_SRC_SHIFT;
 
-		if (pdata->update_gpio) {
-			ret = devm_gpio_request_one(dev, pdata->update_gpio,
-						    GPIOF_OUT_INIT_LOW,
-						    "Watchdog update");
-			if (ret < 0) {
-				dev_err(wm831x->dev,
-					"Failed to request update GPIO: %d\n",
-					ret);
-				return ret;
-			}
-
-			driver_data->update_gpio = pdata->update_gpio;
-
-			/* Make sure the watchdog takes hardware updates */
-			reg |= WM831X_WDOG_RST_SRC;
-		}
-
 		ret = wm831x_reg_unlock(wm831x);
 		if (ret == 0) {
 			ret = wm831x_reg_write(wm831x, WM831X_WATCHDOG, reg);
diff --git a/drivers/watchdog/ziirave_wdt.c b/drivers/watchdog/ziirave_wdt.c
index 4a363a8..cab86a0 100644
--- a/drivers/watchdog/ziirave_wdt.c
+++ b/drivers/watchdog/ziirave_wdt.c
@@ -422,7 +422,7 @@ static int ziirave_firm_upload(struct watchdog_device *wdd,
 
 static const struct watchdog_info ziirave_wdt_info = {
 	.options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING,
-	.identity = "Zodiac RAVE Watchdog",
+	.identity = "RAVE Switch Watchdog",
 };
 
 static const struct watchdog_ops ziirave_wdt_ops = {
diff --git a/drivers/xen/events/events_2l.c b/drivers/xen/events/events_2l.c
index 8edef51..64df919 100644
--- a/drivers/xen/events/events_2l.c
+++ b/drivers/xen/events/events_2l.c
@@ -53,37 +53,37 @@ static void evtchn_2l_bind_to_cpu(struct irq_info *info, unsigned cpu)
 	set_bit(info->evtchn, BM(per_cpu(cpu_evtchn_mask, cpu)));
 }
 
-static void evtchn_2l_clear_pending(unsigned port)
+static void evtchn_2l_clear_pending(evtchn_port_t port)
 {
 	struct shared_info *s = HYPERVISOR_shared_info;
 	sync_clear_bit(port, BM(&s->evtchn_pending[0]));
 }
 
-static void evtchn_2l_set_pending(unsigned port)
+static void evtchn_2l_set_pending(evtchn_port_t port)
 {
 	struct shared_info *s = HYPERVISOR_shared_info;
 	sync_set_bit(port, BM(&s->evtchn_pending[0]));
 }
 
-static bool evtchn_2l_is_pending(unsigned port)
+static bool evtchn_2l_is_pending(evtchn_port_t port)
 {
 	struct shared_info *s = HYPERVISOR_shared_info;
 	return sync_test_bit(port, BM(&s->evtchn_pending[0]));
 }
 
-static bool evtchn_2l_test_and_set_mask(unsigned port)
+static bool evtchn_2l_test_and_set_mask(evtchn_port_t port)
 {
 	struct shared_info *s = HYPERVISOR_shared_info;
 	return sync_test_and_set_bit(port, BM(&s->evtchn_mask[0]));
 }
 
-static void evtchn_2l_mask(unsigned port)
+static void evtchn_2l_mask(evtchn_port_t port)
 {
 	struct shared_info *s = HYPERVISOR_shared_info;
 	sync_set_bit(port, BM(&s->evtchn_mask[0]));
 }
 
-static void evtchn_2l_unmask(unsigned port)
+static void evtchn_2l_unmask(evtchn_port_t port)
 {
 	struct shared_info *s = HYPERVISOR_shared_info;
 	unsigned int cpu = get_cpu();
@@ -173,7 +173,7 @@ static void evtchn_2l_handle_events(unsigned cpu)
 	/* Timer interrupt has highest priority. */
 	irq = irq_from_virq(cpu, VIRQ_TIMER);
 	if (irq != -1) {
-		unsigned int evtchn = evtchn_from_irq(irq);
+		evtchn_port_t evtchn = evtchn_from_irq(irq);
 		word_idx = evtchn / BITS_PER_LONG;
 		bit_idx = evtchn % BITS_PER_LONG;
 		if (active_evtchns(cpu, s, word_idx) & (1ULL << bit_idx))
@@ -228,7 +228,7 @@ static void evtchn_2l_handle_events(unsigned cpu)
 
 		do {
 			xen_ulong_t bits;
-			int port;
+			evtchn_port_t port;
 
 			bits = MASK_LSBS(pending_bits, bit_idx);
 
diff --git a/drivers/xen/events/events_base.c b/drivers/xen/events/events_base.c
index 499eff7..3a791c8 100644
--- a/drivers/xen/events/events_base.c
+++ b/drivers/xen/events/events_base.c
@@ -116,7 +116,7 @@ static void clear_evtchn_to_irq_all(void)
 	}
 }
 
-static int set_evtchn_to_irq(unsigned evtchn, unsigned irq)
+static int set_evtchn_to_irq(evtchn_port_t evtchn, unsigned int irq)
 {
 	unsigned row;
 	unsigned col;
@@ -143,7 +143,7 @@ static int set_evtchn_to_irq(unsigned evtchn, unsigned irq)
 	return 0;
 }
 
-int get_evtchn_to_irq(unsigned evtchn)
+int get_evtchn_to_irq(evtchn_port_t evtchn)
 {
 	if (evtchn >= xen_evtchn_max_channels())
 		return -1;
@@ -162,7 +162,7 @@ struct irq_info *info_for_irq(unsigned irq)
 static int xen_irq_info_common_setup(struct irq_info *info,
 				     unsigned irq,
 				     enum xen_irq_type type,
-				     unsigned evtchn,
+				     evtchn_port_t evtchn,
 				     unsigned short cpu)
 {
 	int ret;
@@ -184,7 +184,7 @@ static int xen_irq_info_common_setup(struct irq_info *info,
 }
 
 static int xen_irq_info_evtchn_setup(unsigned irq,
-				     unsigned evtchn)
+				     evtchn_port_t evtchn)
 {
 	struct irq_info *info = info_for_irq(irq);
 
@@ -193,7 +193,7 @@ static int xen_irq_info_evtchn_setup(unsigned irq,
 
 static int xen_irq_info_ipi_setup(unsigned cpu,
 				  unsigned irq,
-				  unsigned evtchn,
+				  evtchn_port_t evtchn,
 				  enum ipi_vector ipi)
 {
 	struct irq_info *info = info_for_irq(irq);
@@ -207,7 +207,7 @@ static int xen_irq_info_ipi_setup(unsigned cpu,
 
 static int xen_irq_info_virq_setup(unsigned cpu,
 				   unsigned irq,
-				   unsigned evtchn,
+				   evtchn_port_t evtchn,
 				   unsigned virq)
 {
 	struct irq_info *info = info_for_irq(irq);
@@ -220,7 +220,7 @@ static int xen_irq_info_virq_setup(unsigned cpu,
 }
 
 static int xen_irq_info_pirq_setup(unsigned irq,
-				   unsigned evtchn,
+				   evtchn_port_t evtchn,
 				   unsigned pirq,
 				   unsigned gsi,
 				   uint16_t domid,
@@ -245,7 +245,7 @@ static void xen_irq_info_cleanup(struct irq_info *info)
 /*
  * Accessors for packed IRQ information.
  */
-unsigned int evtchn_from_irq(unsigned irq)
+evtchn_port_t evtchn_from_irq(unsigned irq)
 {
 	if (WARN(irq >= nr_irqs, "Invalid irq %d!\n", irq))
 		return 0;
@@ -253,7 +253,7 @@ unsigned int evtchn_from_irq(unsigned irq)
 	return info_for_irq(irq)->evtchn;
 }
 
-unsigned irq_from_evtchn(unsigned int evtchn)
+unsigned int irq_from_evtchn(evtchn_port_t evtchn)
 {
 	return get_evtchn_to_irq(evtchn);
 }
@@ -304,7 +304,7 @@ unsigned cpu_from_irq(unsigned irq)
 	return info_for_irq(irq)->cpu;
 }
 
-unsigned int cpu_from_evtchn(unsigned int evtchn)
+unsigned int cpu_from_evtchn(evtchn_port_t evtchn)
 {
 	int irq = get_evtchn_to_irq(evtchn);
 	unsigned ret = 0;
@@ -330,9 +330,9 @@ static bool pirq_needs_eoi_flag(unsigned irq)
 	return info->u.pirq.flags & PIRQ_NEEDS_EOI;
 }
 
-static void bind_evtchn_to_cpu(unsigned int chn, unsigned int cpu)
+static void bind_evtchn_to_cpu(evtchn_port_t evtchn, unsigned int cpu)
 {
-	int irq = get_evtchn_to_irq(chn);
+	int irq = get_evtchn_to_irq(evtchn);
 	struct irq_info *info = info_for_irq(irq);
 
 	BUG_ON(irq == -1);
@@ -354,7 +354,7 @@ static void bind_evtchn_to_cpu(unsigned int chn, unsigned int cpu)
  */
 void notify_remote_via_irq(int irq)
 {
-	int evtchn = evtchn_from_irq(irq);
+	evtchn_port_t evtchn = evtchn_from_irq(irq);
 
 	if (VALID_EVTCHN(evtchn))
 		notify_remote_via_evtchn(evtchn);
@@ -445,7 +445,7 @@ static void xen_free_irq(unsigned irq)
 	irq_free_desc(irq);
 }
 
-static void xen_evtchn_close(unsigned int port)
+static void xen_evtchn_close(evtchn_port_t port)
 {
 	struct evtchn_close close;
 
@@ -472,7 +472,7 @@ static void pirq_query_unmask(int irq)
 
 static void eoi_pirq(struct irq_data *data)
 {
-	int evtchn = evtchn_from_irq(data->irq);
+	evtchn_port_t evtchn = evtchn_from_irq(data->irq);
 	struct physdev_eoi eoi = { .irq = pirq_from_irq(data->irq) };
 	int rc = 0;
 
@@ -508,7 +508,7 @@ static unsigned int __startup_pirq(unsigned int irq)
 {
 	struct evtchn_bind_pirq bind_pirq;
 	struct irq_info *info = info_for_irq(irq);
-	int evtchn = evtchn_from_irq(irq);
+	evtchn_port_t evtchn = evtchn_from_irq(irq);
 	int rc;
 
 	BUG_ON(info->type != IRQT_PIRQ);
@@ -561,7 +561,7 @@ static void shutdown_pirq(struct irq_data *data)
 {
 	unsigned int irq = data->irq;
 	struct irq_info *info = info_for_irq(irq);
-	unsigned evtchn = evtchn_from_irq(irq);
+	evtchn_port_t evtchn = evtchn_from_irq(irq);
 
 	BUG_ON(info->type != IRQT_PIRQ);
 
@@ -601,7 +601,7 @@ EXPORT_SYMBOL_GPL(xen_irq_from_gsi);
 
 static void __unbind_from_irq(unsigned int irq)
 {
-	int evtchn = evtchn_from_irq(irq);
+	evtchn_port_t evtchn = evtchn_from_irq(irq);
 	struct irq_info *info = irq_get_handler_data(irq);
 
 	if (info->refcnt > 0) {
@@ -827,7 +827,7 @@ int xen_pirq_from_irq(unsigned irq)
 }
 EXPORT_SYMBOL_GPL(xen_pirq_from_irq);
 
-int bind_evtchn_to_irq(unsigned int evtchn)
+int bind_evtchn_to_irq(evtchn_port_t evtchn)
 {
 	int irq;
 	int ret;
@@ -870,8 +870,8 @@ EXPORT_SYMBOL_GPL(bind_evtchn_to_irq);
 static int bind_ipi_to_irq(unsigned int ipi, unsigned int cpu)
 {
 	struct evtchn_bind_ipi bind_ipi;
-	int evtchn, irq;
-	int ret;
+	evtchn_port_t evtchn;
+	int ret, irq;
 
 	mutex_lock(&irq_mapping_update_lock);
 
@@ -909,7 +909,7 @@ static int bind_ipi_to_irq(unsigned int ipi, unsigned int cpu)
 }
 
 int bind_interdomain_evtchn_to_irq(unsigned int remote_domain,
-				   unsigned int remote_port)
+				   evtchn_port_t remote_port)
 {
 	struct evtchn_bind_interdomain bind_interdomain;
 	int err;
@@ -924,10 +924,11 @@ int bind_interdomain_evtchn_to_irq(unsigned int remote_domain,
 }
 EXPORT_SYMBOL_GPL(bind_interdomain_evtchn_to_irq);
 
-static int find_virq(unsigned int virq, unsigned int cpu)
+static int find_virq(unsigned int virq, unsigned int cpu, evtchn_port_t *evtchn)
 {
 	struct evtchn_status status;
-	int port, rc = -ENOENT;
+	evtchn_port_t port;
+	int rc = -ENOENT;
 
 	memset(&status, 0, sizeof(status));
 	for (port = 0; port < xen_evtchn_max_channels(); port++) {
@@ -939,7 +940,7 @@ static int find_virq(unsigned int virq, unsigned int cpu)
 		if (status.status != EVTCHNSTAT_virq)
 			continue;
 		if (status.u.virq == virq && status.vcpu == xen_vcpu_nr(cpu)) {
-			rc = port;
+			*evtchn = port;
 			break;
 		}
 	}
@@ -962,7 +963,8 @@ EXPORT_SYMBOL_GPL(xen_evtchn_nr_channels);
 int bind_virq_to_irq(unsigned int virq, unsigned int cpu, bool percpu)
 {
 	struct evtchn_bind_virq bind_virq;
-	int evtchn, irq, ret;
+	evtchn_port_t evtchn = 0;
+	int irq, ret;
 
 	mutex_lock(&irq_mapping_update_lock);
 
@@ -988,9 +990,8 @@ int bind_virq_to_irq(unsigned int virq, unsigned int cpu, bool percpu)
 			evtchn = bind_virq.port;
 		else {
 			if (ret == -EEXIST)
-				ret = find_virq(virq, cpu);
+				ret = find_virq(virq, cpu, &evtchn);
 			BUG_ON(ret < 0);
-			evtchn = ret;
 		}
 
 		ret = xen_irq_info_virq_setup(cpu, irq, evtchn, virq);
@@ -1019,7 +1020,7 @@ static void unbind_from_irq(unsigned int irq)
 	mutex_unlock(&irq_mapping_update_lock);
 }
 
-int bind_evtchn_to_irqhandler(unsigned int evtchn,
+int bind_evtchn_to_irqhandler(evtchn_port_t evtchn,
 			      irq_handler_t handler,
 			      unsigned long irqflags,
 			      const char *devname, void *dev_id)
@@ -1040,7 +1041,7 @@ int bind_evtchn_to_irqhandler(unsigned int evtchn,
 EXPORT_SYMBOL_GPL(bind_evtchn_to_irqhandler);
 
 int bind_interdomain_evtchn_to_irqhandler(unsigned int remote_domain,
-					  unsigned int remote_port,
+					  evtchn_port_t remote_port,
 					  irq_handler_t handler,
 					  unsigned long irqflags,
 					  const char *devname,
@@ -1132,7 +1133,7 @@ int xen_set_irq_priority(unsigned irq, unsigned priority)
 }
 EXPORT_SYMBOL_GPL(xen_set_irq_priority);
 
-int evtchn_make_refcounted(unsigned int evtchn)
+int evtchn_make_refcounted(evtchn_port_t evtchn)
 {
 	int irq = get_evtchn_to_irq(evtchn);
 	struct irq_info *info;
@@ -1153,7 +1154,7 @@ int evtchn_make_refcounted(unsigned int evtchn)
 }
 EXPORT_SYMBOL_GPL(evtchn_make_refcounted);
 
-int evtchn_get(unsigned int evtchn)
+int evtchn_get(evtchn_port_t evtchn)
 {
 	int irq;
 	struct irq_info *info;
@@ -1186,7 +1187,7 @@ int evtchn_get(unsigned int evtchn)
 }
 EXPORT_SYMBOL_GPL(evtchn_get);
 
-void evtchn_put(unsigned int evtchn)
+void evtchn_put(evtchn_port_t evtchn)
 {
 	int irq = get_evtchn_to_irq(evtchn);
 	if (WARN_ON(irq == -1))
@@ -1252,7 +1253,7 @@ void xen_hvm_evtchn_do_upcall(void)
 EXPORT_SYMBOL_GPL(xen_hvm_evtchn_do_upcall);
 
 /* Rebind a new event channel to an existing irq. */
-void rebind_evtchn_irq(int evtchn, int irq)
+void rebind_evtchn_irq(evtchn_port_t evtchn, int irq)
 {
 	struct irq_info *info = info_for_irq(irq);
 
@@ -1284,7 +1285,7 @@ void rebind_evtchn_irq(int evtchn, int irq)
 }
 
 /* Rebind an evtchn so that it gets delivered to a specific cpu */
-static int xen_rebind_evtchn_to_cpu(int evtchn, unsigned int tcpu)
+static int xen_rebind_evtchn_to_cpu(evtchn_port_t evtchn, unsigned int tcpu)
 {
 	struct evtchn_bind_vcpu bind_vcpu;
 	int masked;
@@ -1342,7 +1343,7 @@ EXPORT_SYMBOL_GPL(xen_set_affinity_evtchn);
 
 static void enable_dynirq(struct irq_data *data)
 {
-	int evtchn = evtchn_from_irq(data->irq);
+	evtchn_port_t evtchn = evtchn_from_irq(data->irq);
 
 	if (VALID_EVTCHN(evtchn))
 		unmask_evtchn(evtchn);
@@ -1350,7 +1351,7 @@ static void enable_dynirq(struct irq_data *data)
 
 static void disable_dynirq(struct irq_data *data)
 {
-	int evtchn = evtchn_from_irq(data->irq);
+	evtchn_port_t evtchn = evtchn_from_irq(data->irq);
 
 	if (VALID_EVTCHN(evtchn))
 		mask_evtchn(evtchn);
@@ -1358,7 +1359,7 @@ static void disable_dynirq(struct irq_data *data)
 
 static void ack_dynirq(struct irq_data *data)
 {
-	int evtchn = evtchn_from_irq(data->irq);
+	evtchn_port_t evtchn = evtchn_from_irq(data->irq);
 
 	if (!VALID_EVTCHN(evtchn))
 		return;
@@ -1385,7 +1386,7 @@ static void mask_ack_dynirq(struct irq_data *data)
 
 static int retrigger_dynirq(struct irq_data *data)
 {
-	unsigned int evtchn = evtchn_from_irq(data->irq);
+	evtchn_port_t evtchn = evtchn_from_irq(data->irq);
 	int masked;
 
 	if (!VALID_EVTCHN(evtchn))
@@ -1440,7 +1441,8 @@ static void restore_pirqs(void)
 static void restore_cpu_virqs(unsigned int cpu)
 {
 	struct evtchn_bind_virq bind_virq;
-	int virq, irq, evtchn;
+	evtchn_port_t evtchn;
+	int virq, irq;
 
 	for (virq = 0; virq < NR_VIRQS; virq++) {
 		if ((irq = per_cpu(virq_to_irq, cpu)[virq]) == -1)
@@ -1465,7 +1467,8 @@ static void restore_cpu_virqs(unsigned int cpu)
 static void restore_cpu_ipis(unsigned int cpu)
 {
 	struct evtchn_bind_ipi bind_ipi;
-	int ipi, irq, evtchn;
+	evtchn_port_t evtchn;
+	int ipi, irq;
 
 	for (ipi = 0; ipi < XEN_NR_IPIS; ipi++) {
 		if ((irq = per_cpu(ipi_to_irq, cpu)[ipi]) == -1)
@@ -1489,7 +1492,7 @@ static void restore_cpu_ipis(unsigned int cpu)
 /* Clear an irq's pending state, in preparation for polling on it */
 void xen_clear_irq_pending(int irq)
 {
-	int evtchn = evtchn_from_irq(irq);
+	evtchn_port_t evtchn = evtchn_from_irq(irq);
 
 	if (VALID_EVTCHN(evtchn))
 		clear_evtchn(evtchn);
@@ -1497,7 +1500,7 @@ void xen_clear_irq_pending(int irq)
 EXPORT_SYMBOL(xen_clear_irq_pending);
 void xen_set_irq_pending(int irq)
 {
-	int evtchn = evtchn_from_irq(irq);
+	evtchn_port_t evtchn = evtchn_from_irq(irq);
 
 	if (VALID_EVTCHN(evtchn))
 		set_evtchn(evtchn);
@@ -1505,7 +1508,7 @@ void xen_set_irq_pending(int irq)
 
 bool xen_test_irq_pending(int irq)
 {
-	int evtchn = evtchn_from_irq(irq);
+	evtchn_port_t evtchn = evtchn_from_irq(irq);
 	bool ret = false;
 
 	if (VALID_EVTCHN(evtchn))
@@ -1667,7 +1670,7 @@ module_param(fifo_events, bool, 0);
 void __init xen_init_IRQ(void)
 {
 	int ret = -EINVAL;
-	unsigned int evtchn;
+	evtchn_port_t evtchn;
 
 	if (fifo_events)
 		ret = xen_evtchn_fifo_init();
diff --git a/drivers/xen/events/events_fifo.c b/drivers/xen/events/events_fifo.c
index 76b318e..c60ee04 100644
--- a/drivers/xen/events/events_fifo.c
+++ b/drivers/xen/events/events_fifo.c
@@ -82,7 +82,7 @@ static unsigned event_array_pages __read_mostly;
 
 #endif
 
-static inline event_word_t *event_word_from_port(unsigned port)
+static inline event_word_t *event_word_from_port(evtchn_port_t port)
 {
 	unsigned i = port / EVENT_WORDS_PER_PAGE;
 
@@ -140,7 +140,7 @@ static void init_array_page(event_word_t *array_page)
 
 static int evtchn_fifo_setup(struct irq_info *info)
 {
-	unsigned port = info->evtchn;
+	evtchn_port_t port = info->evtchn;
 	unsigned new_array_pages;
 	int ret;
 
@@ -191,37 +191,37 @@ static void evtchn_fifo_bind_to_cpu(struct irq_info *info, unsigned cpu)
 	/* no-op */
 }
 
-static void evtchn_fifo_clear_pending(unsigned port)
+static void evtchn_fifo_clear_pending(evtchn_port_t port)
 {
 	event_word_t *word = event_word_from_port(port);
 	sync_clear_bit(EVTCHN_FIFO_BIT(PENDING, word), BM(word));
 }
 
-static void evtchn_fifo_set_pending(unsigned port)
+static void evtchn_fifo_set_pending(evtchn_port_t port)
 {
 	event_word_t *word = event_word_from_port(port);
 	sync_set_bit(EVTCHN_FIFO_BIT(PENDING, word), BM(word));
 }
 
-static bool evtchn_fifo_is_pending(unsigned port)
+static bool evtchn_fifo_is_pending(evtchn_port_t port)
 {
 	event_word_t *word = event_word_from_port(port);
 	return sync_test_bit(EVTCHN_FIFO_BIT(PENDING, word), BM(word));
 }
 
-static bool evtchn_fifo_test_and_set_mask(unsigned port)
+static bool evtchn_fifo_test_and_set_mask(evtchn_port_t port)
 {
 	event_word_t *word = event_word_from_port(port);
 	return sync_test_and_set_bit(EVTCHN_FIFO_BIT(MASKED, word), BM(word));
 }
 
-static void evtchn_fifo_mask(unsigned port)
+static void evtchn_fifo_mask(evtchn_port_t port)
 {
 	event_word_t *word = event_word_from_port(port);
 	sync_set_bit(EVTCHN_FIFO_BIT(MASKED, word), BM(word));
 }
 
-static bool evtchn_fifo_is_masked(unsigned port)
+static bool evtchn_fifo_is_masked(evtchn_port_t port)
 {
 	event_word_t *word = event_word_from_port(port);
 	return sync_test_bit(EVTCHN_FIFO_BIT(MASKED, word), BM(word));
@@ -242,7 +242,7 @@ static void clear_masked(volatile event_word_t *word)
 	} while (w != old);
 }
 
-static void evtchn_fifo_unmask(unsigned port)
+static void evtchn_fifo_unmask(evtchn_port_t port)
 {
 	event_word_t *word = event_word_from_port(port);
 
@@ -270,7 +270,7 @@ static uint32_t clear_linked(volatile event_word_t *word)
 	return w & EVTCHN_FIFO_LINK_MASK;
 }
 
-static void handle_irq_for_port(unsigned port)
+static void handle_irq_for_port(evtchn_port_t port)
 {
 	int irq;
 
@@ -286,7 +286,7 @@ static void consume_one_event(unsigned cpu,
 {
 	struct evtchn_fifo_queue *q = &per_cpu(cpu_queue, cpu);
 	uint32_t head;
-	unsigned port;
+	evtchn_port_t port;
 	event_word_t *word;
 
 	head = q->head[priority];
diff --git a/drivers/xen/events/events_internal.h b/drivers/xen/events/events_internal.h
index 82938cf..10684fe 100644
--- a/drivers/xen/events/events_internal.h
+++ b/drivers/xen/events/events_internal.h
@@ -33,7 +33,7 @@ struct irq_info {
 	int refcnt;
 	enum xen_irq_type type;	/* type */
 	unsigned irq;
-	unsigned int evtchn;	/* event channel */
+	evtchn_port_t evtchn;	/* event channel */
 	unsigned short cpu;	/* cpu bound */
 
 	union {
@@ -60,12 +60,12 @@ struct evtchn_ops {
 	int (*setup)(struct irq_info *info);
 	void (*bind_to_cpu)(struct irq_info *info, unsigned cpu);
 
-	void (*clear_pending)(unsigned port);
-	void (*set_pending)(unsigned port);
-	bool (*is_pending)(unsigned port);
-	bool (*test_and_set_mask)(unsigned port);
-	void (*mask)(unsigned port);
-	void (*unmask)(unsigned port);
+	void (*clear_pending)(evtchn_port_t port);
+	void (*set_pending)(evtchn_port_t port);
+	bool (*is_pending)(evtchn_port_t port);
+	bool (*test_and_set_mask)(evtchn_port_t port);
+	void (*mask)(evtchn_port_t port);
+	void (*unmask)(evtchn_port_t port);
 
 	void (*handle_events)(unsigned cpu);
 	void (*resume)(void);
@@ -74,11 +74,11 @@ struct evtchn_ops {
 extern const struct evtchn_ops *evtchn_ops;
 
 extern int **evtchn_to_irq;
-int get_evtchn_to_irq(unsigned int evtchn);
+int get_evtchn_to_irq(evtchn_port_t evtchn);
 
 struct irq_info *info_for_irq(unsigned irq);
 unsigned cpu_from_irq(unsigned irq);
-unsigned cpu_from_evtchn(unsigned int evtchn);
+unsigned int cpu_from_evtchn(evtchn_port_t evtchn);
 
 static inline unsigned xen_evtchn_max_channels(void)
 {
@@ -102,32 +102,32 @@ static inline void xen_evtchn_port_bind_to_cpu(struct irq_info *info,
 	evtchn_ops->bind_to_cpu(info, cpu);
 }
 
-static inline void clear_evtchn(unsigned port)
+static inline void clear_evtchn(evtchn_port_t port)
 {
 	evtchn_ops->clear_pending(port);
 }
 
-static inline void set_evtchn(unsigned port)
+static inline void set_evtchn(evtchn_port_t port)
 {
 	evtchn_ops->set_pending(port);
 }
 
-static inline bool test_evtchn(unsigned port)
+static inline bool test_evtchn(evtchn_port_t port)
 {
 	return evtchn_ops->is_pending(port);
 }
 
-static inline bool test_and_set_mask(unsigned port)
+static inline bool test_and_set_mask(evtchn_port_t port)
 {
 	return evtchn_ops->test_and_set_mask(port);
 }
 
-static inline void mask_evtchn(unsigned port)
+static inline void mask_evtchn(evtchn_port_t port)
 {
 	return evtchn_ops->mask(port);
 }
 
-static inline void unmask_evtchn(unsigned port)
+static inline void unmask_evtchn(evtchn_port_t port)
 {
 	return evtchn_ops->unmask(port);
 }
diff --git a/drivers/xen/evtchn.c b/drivers/xen/evtchn.c
index 052b55a..6e0b1dd 100644
--- a/drivers/xen/evtchn.c
+++ b/drivers/xen/evtchn.c
@@ -83,7 +83,7 @@ struct per_user_data {
 struct user_evtchn {
 	struct rb_node node;
 	struct per_user_data *user;
-	unsigned port;
+	evtchn_port_t port;
 	bool enabled;
 };
 
@@ -138,7 +138,8 @@ static void del_evtchn(struct per_user_data *u, struct user_evtchn *evtchn)
 	kfree(evtchn);
 }
 
-static struct user_evtchn *find_evtchn(struct per_user_data *u, unsigned port)
+static struct user_evtchn *find_evtchn(struct per_user_data *u,
+				       evtchn_port_t port)
 {
 	struct rb_node *node = u->evtchns.rb_node;
 
@@ -163,7 +164,7 @@ static irqreturn_t evtchn_interrupt(int irq, void *data)
 	struct per_user_data *u = evtchn->user;
 
 	WARN(!evtchn->enabled,
-	     "Interrupt for port %d, but apparently not enabled; per-user %p\n",
+	     "Interrupt for port %u, but apparently not enabled; per-user %p\n",
 	     evtchn->port, u);
 
 	disable_irq_nosync(irq);
@@ -286,7 +287,7 @@ static ssize_t evtchn_write(struct file *file, const char __user *buf,
 	mutex_lock(&u->bind_mutex);
 
 	for (i = 0; i < (count/sizeof(evtchn_port_t)); i++) {
-		unsigned port = kbuf[i];
+		evtchn_port_t port = kbuf[i];
 		struct user_evtchn *evtchn;
 
 		evtchn = find_evtchn(u, port);
@@ -361,7 +362,7 @@ static int evtchn_resize_ring(struct per_user_data *u)
 	return 0;
 }
 
-static int evtchn_bind_to_user(struct per_user_data *u, int port)
+static int evtchn_bind_to_user(struct per_user_data *u, evtchn_port_t port)
 {
 	struct user_evtchn *evtchn;
 	struct evtchn_close close;
@@ -423,7 +424,7 @@ static void evtchn_unbind_from_user(struct per_user_data *u,
 
 static DEFINE_PER_CPU(int, bind_last_selected_cpu);
 
-static void evtchn_bind_interdom_next_vcpu(int evtchn)
+static void evtchn_bind_interdom_next_vcpu(evtchn_port_t evtchn)
 {
 	unsigned int selected_cpu, irq;
 	struct irq_desc *desc;
diff --git a/drivers/xen/gntdev-common.h b/drivers/xen/gntdev-common.h
index 9a3960e..20d7d05 100644
--- a/drivers/xen/gntdev-common.h
+++ b/drivers/xen/gntdev-common.h
@@ -15,6 +15,7 @@
 #include <linux/mman.h>
 #include <linux/mmu_notifier.h>
 #include <linux/types.h>
+#include <xen/interface/event_channel.h>
 
 struct gntdev_dmabuf_priv;
 
@@ -38,7 +39,7 @@ struct gntdev_unmap_notify {
 	int flags;
 	/* Address relative to the start of the gntdev_grant_map. */
 	int addr;
-	int event;
+	evtchn_port_t event;
 };
 
 struct gntdev_grant_map {
diff --git a/drivers/xen/gntdev.c b/drivers/xen/gntdev.c
index 0258415..50651e5 100644
--- a/drivers/xen/gntdev.c
+++ b/drivers/xen/gntdev.c
@@ -652,7 +652,7 @@ static long gntdev_ioctl_notify(struct gntdev_priv *priv, void __user *u)
 	struct gntdev_grant_map *map;
 	int rc;
 	int out_flags;
-	unsigned int out_event;
+	evtchn_port_t out_event;
 
 	if (copy_from_user(&op, u, sizeof(op)))
 		return -EFAULT;
diff --git a/drivers/xen/pvcalls-back.c b/drivers/xen/pvcalls-back.c
index c57c71b..cf4ce3e 100644
--- a/drivers/xen/pvcalls-back.c
+++ b/drivers/xen/pvcalls-back.c
@@ -300,7 +300,7 @@ static struct sock_mapping *pvcalls_new_active_socket(
 		struct pvcalls_fedata *fedata,
 		uint64_t id,
 		grant_ref_t ref,
-		uint32_t evtchn,
+		evtchn_port_t evtchn,
 		struct socket *sock)
 {
 	int ret;
@@ -905,7 +905,8 @@ static irqreturn_t pvcalls_back_conn_event(int irq, void *sock_map)
 
 static int backend_connect(struct xenbus_device *dev)
 {
-	int err, evtchn;
+	int err;
+	evtchn_port_t evtchn;
 	grant_ref_t ring_ref;
 	struct pvcalls_fedata *fedata = NULL;
 
diff --git a/drivers/xen/pvcalls-front.c b/drivers/xen/pvcalls-front.c
index 57592a6..b43b559 100644
--- a/drivers/xen/pvcalls-front.c
+++ b/drivers/xen/pvcalls-front.c
@@ -368,12 +368,12 @@ static int alloc_active_ring(struct sock_mapping *map)
 	return -ENOMEM;
 }
 
-static int create_active(struct sock_mapping *map, int *evtchn)
+static int create_active(struct sock_mapping *map, evtchn_port_t *evtchn)
 {
 	void *bytes;
 	int ret = -ENOMEM, irq = -1, i;
 
-	*evtchn = -1;
+	*evtchn = 0;
 	init_waitqueue_head(&map->active.inflight_conn_req);
 
 	bytes = map->active.data.in;
@@ -404,7 +404,7 @@ static int create_active(struct sock_mapping *map, int *evtchn)
 	return 0;
 
 out_error:
-	if (*evtchn >= 0)
+	if (*evtchn > 0)
 		xenbus_free_evtchn(pvcalls_front_dev, *evtchn);
 	return ret;
 }
@@ -415,7 +415,8 @@ int pvcalls_front_connect(struct socket *sock, struct sockaddr *addr,
 	struct pvcalls_bedata *bedata;
 	struct sock_mapping *map = NULL;
 	struct xen_pvcalls_request *req;
-	int notify, req_id, ret, evtchn;
+	int notify, req_id, ret;
+	evtchn_port_t evtchn;
 
 	if (addr->sa_family != AF_INET || sock->type != SOCK_STREAM)
 		return -EOPNOTSUPP;
@@ -765,7 +766,8 @@ int pvcalls_front_accept(struct socket *sock, struct socket *newsock, int flags)
 	struct sock_mapping *map;
 	struct sock_mapping *map2 = NULL;
 	struct xen_pvcalls_request *req;
-	int notify, req_id, ret, evtchn, nonblock;
+	int notify, req_id, ret, nonblock;
+	evtchn_port_t evtchn;
 
 	map = pvcalls_enter_sock(sock);
 	if (IS_ERR(map))
@@ -1125,7 +1127,8 @@ static int pvcalls_front_remove(struct xenbus_device *dev)
 static int pvcalls_front_probe(struct xenbus_device *dev,
 			  const struct xenbus_device_id *id)
 {
-	int ret = -ENOMEM, evtchn, i;
+	int ret = -ENOMEM, i;
+	evtchn_port_t evtchn;
 	unsigned int max_page_order, function_calls, len;
 	char *versions;
 	grant_ref_t gref_head = 0;
diff --git a/drivers/xen/xen-pciback/conf_space.c b/drivers/xen/xen-pciback/conf_space.c
index b20e43e..da51a5d 100644
--- a/drivers/xen/xen-pciback/conf_space.c
+++ b/drivers/xen/xen-pciback/conf_space.c
@@ -320,7 +320,7 @@ int xen_pcibk_get_interrupt_type(struct pci_dev *dev)
 		if (val & PCI_MSIX_FLAGS_ENABLE)
 			ret |= INTERRUPT_TYPE_MSIX;
 	}
-	return ret;
+	return ret ?: INTERRUPT_TYPE_NONE;
 }
 
 void xen_pcibk_config_free_dyn_fields(struct pci_dev *dev)
diff --git a/drivers/xen/xen-pciback/conf_space.h b/drivers/xen/xen-pciback/conf_space.h
index 28c4518..5fe431c 100644
--- a/drivers/xen/xen-pciback/conf_space.h
+++ b/drivers/xen/xen-pciback/conf_space.h
@@ -65,10 +65,10 @@ struct config_field_entry {
 	void *data;
 };
 
-#define INTERRUPT_TYPE_NONE (1<<0)
-#define INTERRUPT_TYPE_INTX (1<<1)
-#define INTERRUPT_TYPE_MSI  (1<<2)
-#define INTERRUPT_TYPE_MSIX (1<<3)
+#define INTERRUPT_TYPE_NONE (0)
+#define INTERRUPT_TYPE_INTX (1<<0)
+#define INTERRUPT_TYPE_MSI  (1<<1)
+#define INTERRUPT_TYPE_MSIX (1<<2)
 
 extern bool xen_pcibk_permissive;
 
diff --git a/drivers/xen/xen-pciback/xenbus.c b/drivers/xen/xen-pciback/xenbus.c
index 833b2d2..f211558 100644
--- a/drivers/xen/xen-pciback/xenbus.c
+++ b/drivers/xen/xen-pciback/xenbus.c
@@ -105,13 +105,13 @@ static void free_pdev(struct xen_pcibk_device *pdev)
 }
 
 static int xen_pcibk_do_attach(struct xen_pcibk_device *pdev, int gnt_ref,
-			     int remote_evtchn)
+			     evtchn_port_t remote_evtchn)
 {
 	int err = 0;
 	void *vaddr;
 
 	dev_dbg(&pdev->xdev->dev,
-		"Attaching to frontend resources - gnt_ref=%d evtchn=%d\n",
+		"Attaching to frontend resources - gnt_ref=%d evtchn=%u\n",
 		gnt_ref, remote_evtchn);
 
 	err = xenbus_map_ring_valloc(pdev->xdev, &gnt_ref, 1, &vaddr);
@@ -142,7 +142,8 @@ static int xen_pcibk_do_attach(struct xen_pcibk_device *pdev, int gnt_ref,
 static int xen_pcibk_attach(struct xen_pcibk_device *pdev)
 {
 	int err = 0;
-	int gnt_ref, remote_evtchn;
+	int gnt_ref;
+	evtchn_port_t remote_evtchn;
 	char *magic = NULL;
 
 
diff --git a/drivers/xen/xen-scsiback.c b/drivers/xen/xen-scsiback.c
index ba0942e..75c0a2e 100644
--- a/drivers/xen/xen-scsiback.c
+++ b/drivers/xen/xen-scsiback.c
@@ -854,7 +854,8 @@ static int scsiback_init_sring(struct vscsibk_info *info, grant_ref_t ring_ref,
 static int scsiback_map(struct vscsibk_info *info)
 {
 	struct xenbus_device *dev = info->dev;
-	unsigned int ring_ref, evtchn;
+	unsigned int ring_ref;
+	evtchn_port_t evtchn;
 	int err;
 
 	err = xenbus_gather(XBT_NIL, dev->otherend,
diff --git a/drivers/xen/xenbus/xenbus_client.c b/drivers/xen/xenbus/xenbus_client.c
index e17ca81..040d2a4 100644
--- a/drivers/xen/xenbus/xenbus_client.c
+++ b/drivers/xen/xenbus/xenbus_client.c
@@ -391,7 +391,7 @@ EXPORT_SYMBOL_GPL(xenbus_grant_ring);
  * error, the device will switch to XenbusStateClosing, and the error will be
  * saved in the store.
  */
-int xenbus_alloc_evtchn(struct xenbus_device *dev, int *port)
+int xenbus_alloc_evtchn(struct xenbus_device *dev, evtchn_port_t *port)
 {
 	struct evtchn_alloc_unbound alloc_unbound;
 	int err;
@@ -414,7 +414,7 @@ EXPORT_SYMBOL_GPL(xenbus_alloc_evtchn);
 /**
  * Free an existing event channel. Returns 0 on success or -errno on error.
  */
-int xenbus_free_evtchn(struct xenbus_device *dev, int port)
+int xenbus_free_evtchn(struct xenbus_device *dev, evtchn_port_t port)
 {
 	struct evtchn_close close;
 	int err;
@@ -423,7 +423,7 @@ int xenbus_free_evtchn(struct xenbus_device *dev, int port)
 
 	err = HYPERVISOR_event_channel_op(EVTCHNOP_close, &close);
 	if (err)
-		xenbus_dev_error(dev, err, "freeing event channel %d", port);
+		xenbus_dev_error(dev, err, "freeing event channel %u", port);
 
 	return err;
 }
@@ -448,7 +448,14 @@ EXPORT_SYMBOL_GPL(xenbus_free_evtchn);
 int xenbus_map_ring_valloc(struct xenbus_device *dev, grant_ref_t *gnt_refs,
 			   unsigned int nr_grefs, void **vaddr)
 {
-	return ring_ops->map(dev, gnt_refs, nr_grefs, vaddr);
+	int err;
+
+	err = ring_ops->map(dev, gnt_refs, nr_grefs, vaddr);
+	/* Some hypervisors are buggy and can return 1. */
+	if (err > 0)
+		err = GNTST_general_error;
+
+	return err;
 }
 EXPORT_SYMBOL_GPL(xenbus_map_ring_valloc);
 
@@ -517,6 +524,48 @@ static int __xenbus_map_ring(struct xenbus_device *dev,
 	return err;
 }
 
+/**
+ * xenbus_unmap_ring
+ * @dev: xenbus device
+ * @handles: grant handle array
+ * @nr_handles: number of handles in the array
+ * @vaddrs: addresses to unmap
+ *
+ * Unmap memory in this domain that was imported from another domain.
+ * Returns 0 on success and returns GNTST_* on error
+ * (see xen/include/interface/grant_table.h).
+ */
+static int xenbus_unmap_ring(struct xenbus_device *dev, grant_handle_t *handles,
+			     unsigned int nr_handles, unsigned long *vaddrs)
+{
+	struct gnttab_unmap_grant_ref unmap[XENBUS_MAX_RING_GRANTS];
+	int i;
+	int err;
+
+	if (nr_handles > XENBUS_MAX_RING_GRANTS)
+		return -EINVAL;
+
+	for (i = 0; i < nr_handles; i++)
+		gnttab_set_unmap_op(&unmap[i], vaddrs[i],
+				    GNTMAP_host_map, handles[i]);
+
+	if (HYPERVISOR_grant_table_op(GNTTABOP_unmap_grant_ref, unmap, i))
+		BUG();
+
+	err = GNTST_okay;
+	for (i = 0; i < nr_handles; i++) {
+		if (unmap[i].status != GNTST_okay) {
+			xenbus_dev_error(dev, unmap[i].status,
+					 "unmapping page at handle %d error %d",
+					 handles[i], unmap[i].status);
+			err = unmap[i].status;
+			break;
+		}
+	}
+
+	return err;
+}
+
 struct map_ring_valloc_hvm
 {
 	unsigned int idx;
@@ -608,45 +657,6 @@ static int xenbus_map_ring_valloc_hvm(struct xenbus_device *dev,
 	return err;
 }
 
-
-/**
- * xenbus_map_ring
- * @dev: xenbus device
- * @gnt_refs: grant reference array
- * @nr_grefs: number of grant reference
- * @handles: pointer to grant handle to be filled
- * @vaddrs: addresses to be mapped to
- * @leaked: fail to clean up a failed map, caller should not free vaddr
- *
- * Map pages of memory into this domain from another domain's grant table.
- * xenbus_map_ring does not allocate the virtual address space (you must do
- * this yourself!). It only maps in the pages to the specified address.
- * Returns 0 on success, and GNTST_* (see xen/include/interface/grant_table.h)
- * or -ENOMEM / -EINVAL on error. If an error is returned, device will switch to
- * XenbusStateClosing and the first error message will be saved in XenStore.
- * Further more if we fail to map the ring, caller should check @leaked.
- * If @leaked is not zero it means xenbus_map_ring fails to clean up, caller
- * should not free the address space of @vaddr.
- */
-int xenbus_map_ring(struct xenbus_device *dev, grant_ref_t *gnt_refs,
-		    unsigned int nr_grefs, grant_handle_t *handles,
-		    unsigned long *vaddrs, bool *leaked)
-{
-	phys_addr_t phys_addrs[XENBUS_MAX_RING_GRANTS];
-	int i;
-
-	if (nr_grefs > XENBUS_MAX_RING_GRANTS)
-		return -EINVAL;
-
-	for (i = 0; i < nr_grefs; i++)
-		phys_addrs[i] = (unsigned long)vaddrs[i];
-
-	return __xenbus_map_ring(dev, gnt_refs, nr_grefs, handles,
-				 phys_addrs, GNTMAP_host_map, leaked);
-}
-EXPORT_SYMBOL_GPL(xenbus_map_ring);
-
-
 /**
  * xenbus_unmap_ring_vfree
  * @dev: xenbus device
@@ -859,51 +869,6 @@ static int xenbus_unmap_ring_vfree_hvm(struct xenbus_device *dev, void *vaddr)
 }
 
 /**
- * xenbus_unmap_ring
- * @dev: xenbus device
- * @handles: grant handle array
- * @nr_handles: number of handles in the array
- * @vaddrs: addresses to unmap
- *
- * Unmap memory in this domain that was imported from another domain.
- * Returns 0 on success and returns GNTST_* on error
- * (see xen/include/interface/grant_table.h).
- */
-int xenbus_unmap_ring(struct xenbus_device *dev,
-		      grant_handle_t *handles, unsigned int nr_handles,
-		      unsigned long *vaddrs)
-{
-	struct gnttab_unmap_grant_ref unmap[XENBUS_MAX_RING_GRANTS];
-	int i;
-	int err;
-
-	if (nr_handles > XENBUS_MAX_RING_GRANTS)
-		return -EINVAL;
-
-	for (i = 0; i < nr_handles; i++)
-		gnttab_set_unmap_op(&unmap[i], vaddrs[i],
-				    GNTMAP_host_map, handles[i]);
-
-	if (HYPERVISOR_grant_table_op(GNTTABOP_unmap_grant_ref, unmap, i))
-		BUG();
-
-	err = GNTST_okay;
-	for (i = 0; i < nr_handles; i++) {
-		if (unmap[i].status != GNTST_okay) {
-			xenbus_dev_error(dev, unmap[i].status,
-					 "unmapping page at handle %d error %d",
-					 handles[i], unmap[i].status);
-			err = unmap[i].status;
-			break;
-		}
-	}
-
-	return err;
-}
-EXPORT_SYMBOL_GPL(xenbus_unmap_ring);
-
-
-/**
  * xenbus_read_driver_state
  * @path: path for driver
  *
diff --git a/drivers/zorro/.gitignore b/drivers/zorro/.gitignore
index 34f980b..acd6ffb 100644
--- a/drivers/zorro/.gitignore
+++ b/drivers/zorro/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 devlist.h
 gen-devlist
diff --git a/fs/9p/Kconfig b/fs/9p/Kconfig
index ac2ec45..09fd4a1 100644
--- a/fs/9p/Kconfig
+++ b/fs/9p/Kconfig
@@ -32,13 +32,13 @@
 
 
 config 9P_FS_SECURITY
-        bool "9P Security Labels"
-        depends on 9P_FS
-        help
-          Security labels support alternative access control models
-          implemented by security modules like SELinux.  This option
-          enables an extended attribute handler for file security
-          labels in the 9P filesystem.
+	bool "9P Security Labels"
+	depends on 9P_FS
+	help
+	  Security labels support alternative access control models
+	  implemented by security modules like SELinux.  This option
+	  enables an extended attribute handler for file security
+	  labels in the 9P filesystem.
 
-          If you are not using a security module that requires using
-          extended attributes for file security labels, say N.
+	  If you are not using a security module that requires using
+	  extended attributes for file security labels, say N.
diff --git a/fs/9p/vfs_file.c b/fs/9p/vfs_file.c
index fe7f0bd..92cd1d8 100644
--- a/fs/9p/vfs_file.c
+++ b/fs/9p/vfs_file.c
@@ -388,7 +388,10 @@ v9fs_file_read_iter(struct kiocb *iocb, struct iov_iter *to)
 	p9_debug(P9_DEBUG_VFS, "count %zu offset %lld\n",
 		 iov_iter_count(to), iocb->ki_pos);
 
-	ret = p9_client_read(fid, iocb->ki_pos, to, &err);
+	if (iocb->ki_filp->f_flags & O_NONBLOCK)
+		ret = p9_client_read_once(fid, iocb->ki_pos, to, &err);
+	else
+		ret = p9_client_read(fid, iocb->ki_pos, to, &err);
 	if (!ret)
 		return err;
 
diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c
index b82423a..c9255d3 100644
--- a/fs/9p/vfs_inode.c
+++ b/fs/9p/vfs_inode.c
@@ -143,7 +143,7 @@ static umode_t p9mode2unixmode(struct v9fs_session_info *v9ses,
 		default:
 			p9_debug(P9_DEBUG_ERROR, "Unknown special type %c %s\n",
 				 type, stat->extension);
-		};
+		}
 		*rdev = MKDEV(major, minor);
 	} else
 		res |= S_IFREG;
diff --git a/fs/Kconfig b/fs/Kconfig
index 708ba33..f08fbbf 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -140,9 +140,10 @@
 endif # BLOCK
 
 if BLOCK
-menu "DOS/FAT/NT Filesystems"
+menu "DOS/FAT/EXFAT/NT Filesystems"
 
 source "fs/fat/Kconfig"
+source "fs/exfat/Kconfig"
 source "fs/ntfs/Kconfig"
 
 endmenu
diff --git a/fs/Makefile b/fs/Makefile
index 505e511..2ce5112 100644
--- a/fs/Makefile
+++ b/fs/Makefile
@@ -83,6 +83,7 @@
 obj-$(CONFIG_CODA_FS)		+= coda/
 obj-$(CONFIG_MINIX_FS)		+= minix/
 obj-$(CONFIG_FAT_FS)		+= fat/
+obj-$(CONFIG_EXFAT_FS)		+= exfat/
 obj-$(CONFIG_BFS_FS)		+= bfs/
 obj-$(CONFIG_ISO9660_FS)	+= isofs/
 obj-$(CONFIG_HFSPLUS_FS)	+= hfsplus/ # Before hfs to find wrapped HFS+
diff --git a/fs/afs/dir.c b/fs/afs/dir.c
index 5c794f4..d1e1caa 100644
--- a/fs/afs/dir.c
+++ b/fs/afs/dir.c
@@ -1032,7 +1032,7 @@ static int afs_d_revalidate(struct dentry *dentry, unsigned int flags)
 	struct dentry *parent;
 	struct inode *inode;
 	struct key *key;
-	afs_dataversion_t dir_version;
+	afs_dataversion_t dir_version, invalid_before;
 	long de_version;
 	int ret;
 
@@ -1084,8 +1084,8 @@ static int afs_d_revalidate(struct dentry *dentry, unsigned int flags)
 	if (de_version == (long)dir_version)
 		goto out_valid_noupdate;
 
-	dir_version = dir->invalid_before;
-	if (de_version - (long)dir_version >= 0)
+	invalid_before = dir->invalid_before;
+	if (de_version - (long)invalid_before >= 0)
 		goto out_valid;
 
 	_debug("dir modified");
@@ -1275,6 +1275,7 @@ static int afs_mkdir(struct inode *dir, struct dentry *dentry, umode_t mode)
 	struct afs_fs_cursor fc;
 	struct afs_vnode *dvnode = AFS_FS_I(dir);
 	struct key *key;
+	afs_dataversion_t data_version;
 	int ret;
 
 	mode |= S_IFDIR;
@@ -1295,7 +1296,7 @@ static int afs_mkdir(struct inode *dir, struct dentry *dentry, umode_t mode)
 
 	ret = -ERESTARTSYS;
 	if (afs_begin_vnode_operation(&fc, dvnode, key, true)) {
-		afs_dataversion_t data_version = dvnode->status.data_version + 1;
+		data_version = dvnode->status.data_version + 1;
 
 		while (afs_select_fileserver(&fc)) {
 			fc.cb_break = afs_calc_vnode_cb_break(dvnode);
@@ -1316,10 +1317,14 @@ static int afs_mkdir(struct inode *dir, struct dentry *dentry, umode_t mode)
 		goto error_key;
 	}
 
-	if (ret == 0 &&
-	    test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags))
-		afs_edit_dir_add(dvnode, &dentry->d_name, &iget_data.fid,
-				 afs_edit_dir_for_create);
+	if (ret == 0) {
+		down_write(&dvnode->validate_lock);
+		if (test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags) &&
+		    dvnode->status.data_version == data_version)
+			afs_edit_dir_add(dvnode, &dentry->d_name, &iget_data.fid,
+					 afs_edit_dir_for_create);
+		up_write(&dvnode->validate_lock);
+	}
 
 	key_put(key);
 	kfree(scb);
@@ -1360,6 +1365,7 @@ static int afs_rmdir(struct inode *dir, struct dentry *dentry)
 	struct afs_fs_cursor fc;
 	struct afs_vnode *dvnode = AFS_FS_I(dir), *vnode = NULL;
 	struct key *key;
+	afs_dataversion_t data_version;
 	int ret;
 
 	_enter("{%llx:%llu},{%pd}",
@@ -1391,7 +1397,7 @@ static int afs_rmdir(struct inode *dir, struct dentry *dentry)
 
 	ret = -ERESTARTSYS;
 	if (afs_begin_vnode_operation(&fc, dvnode, key, true)) {
-		afs_dataversion_t data_version = dvnode->status.data_version + 1;
+		data_version = dvnode->status.data_version + 1;
 
 		while (afs_select_fileserver(&fc)) {
 			fc.cb_break = afs_calc_vnode_cb_break(dvnode);
@@ -1404,9 +1410,12 @@ static int afs_rmdir(struct inode *dir, struct dentry *dentry)
 		ret = afs_end_vnode_operation(&fc);
 		if (ret == 0) {
 			afs_dir_remove_subdir(dentry);
-			if (test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags))
+			down_write(&dvnode->validate_lock);
+			if (test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags) &&
+			    dvnode->status.data_version == data_version)
 				afs_edit_dir_remove(dvnode, &dentry->d_name,
 						    afs_edit_dir_for_rmdir);
+			up_write(&dvnode->validate_lock);
 		}
 	}
 
@@ -1544,10 +1553,15 @@ static int afs_unlink(struct inode *dir, struct dentry *dentry)
 		ret = afs_end_vnode_operation(&fc);
 		if (ret == 0 && !(scb[1].have_status || scb[1].have_error))
 			ret = afs_dir_remove_link(dvnode, dentry, key);
-		if (ret == 0 &&
-		    test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags))
-			afs_edit_dir_remove(dvnode, &dentry->d_name,
-					    afs_edit_dir_for_unlink);
+
+		if (ret == 0) {
+			down_write(&dvnode->validate_lock);
+			if (test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags) &&
+			    dvnode->status.data_version == data_version)
+				afs_edit_dir_remove(dvnode, &dentry->d_name,
+						    afs_edit_dir_for_unlink);
+			up_write(&dvnode->validate_lock);
+		}
 	}
 
 	if (need_rehash && ret < 0 && ret != -ENOENT)
@@ -1573,6 +1587,7 @@ static int afs_create(struct inode *dir, struct dentry *dentry, umode_t mode,
 	struct afs_status_cb *scb;
 	struct afs_vnode *dvnode = AFS_FS_I(dir);
 	struct key *key;
+	afs_dataversion_t data_version;
 	int ret;
 
 	mode |= S_IFREG;
@@ -1597,7 +1612,7 @@ static int afs_create(struct inode *dir, struct dentry *dentry, umode_t mode,
 
 	ret = -ERESTARTSYS;
 	if (afs_begin_vnode_operation(&fc, dvnode, key, true)) {
-		afs_dataversion_t data_version = dvnode->status.data_version + 1;
+		data_version = dvnode->status.data_version + 1;
 
 		while (afs_select_fileserver(&fc)) {
 			fc.cb_break = afs_calc_vnode_cb_break(dvnode);
@@ -1618,9 +1633,12 @@ static int afs_create(struct inode *dir, struct dentry *dentry, umode_t mode,
 		goto error_key;
 	}
 
-	if (test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags))
+	down_write(&dvnode->validate_lock);
+	if (test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags) &&
+	    dvnode->status.data_version == data_version)
 		afs_edit_dir_add(dvnode, &dentry->d_name, &iget_data.fid,
 				 afs_edit_dir_for_create);
+	up_write(&dvnode->validate_lock);
 
 	kfree(scb);
 	key_put(key);
@@ -1648,6 +1666,7 @@ static int afs_link(struct dentry *from, struct inode *dir,
 	struct afs_vnode *dvnode = AFS_FS_I(dir);
 	struct afs_vnode *vnode = AFS_FS_I(d_inode(from));
 	struct key *key;
+	afs_dataversion_t data_version;
 	int ret;
 
 	_enter("{%llx:%llu},{%llx:%llu},{%pd}",
@@ -1672,7 +1691,7 @@ static int afs_link(struct dentry *from, struct inode *dir,
 
 	ret = -ERESTARTSYS;
 	if (afs_begin_vnode_operation(&fc, dvnode, key, true)) {
-		afs_dataversion_t data_version = dvnode->status.data_version + 1;
+		data_version = dvnode->status.data_version + 1;
 
 		if (mutex_lock_interruptible_nested(&vnode->io_lock, 1) < 0) {
 			afs_end_vnode_operation(&fc);
@@ -1702,9 +1721,12 @@ static int afs_link(struct dentry *from, struct inode *dir,
 		goto error_key;
 	}
 
-	if (test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags))
+	down_write(&dvnode->validate_lock);
+	if (test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags) &&
+	    dvnode->status.data_version == data_version)
 		afs_edit_dir_add(dvnode, &dentry->d_name, &vnode->fid,
 				 afs_edit_dir_for_link);
+	up_write(&dvnode->validate_lock);
 
 	key_put(key);
 	kfree(scb);
@@ -1732,6 +1754,7 @@ static int afs_symlink(struct inode *dir, struct dentry *dentry,
 	struct afs_status_cb *scb;
 	struct afs_vnode *dvnode = AFS_FS_I(dir);
 	struct key *key;
+	afs_dataversion_t data_version;
 	int ret;
 
 	_enter("{%llx:%llu},{%pd},%s",
@@ -1759,7 +1782,7 @@ static int afs_symlink(struct inode *dir, struct dentry *dentry,
 
 	ret = -ERESTARTSYS;
 	if (afs_begin_vnode_operation(&fc, dvnode, key, true)) {
-		afs_dataversion_t data_version = dvnode->status.data_version + 1;
+		data_version = dvnode->status.data_version + 1;
 
 		while (afs_select_fileserver(&fc)) {
 			fc.cb_break = afs_calc_vnode_cb_break(dvnode);
@@ -1780,9 +1803,12 @@ static int afs_symlink(struct inode *dir, struct dentry *dentry,
 		goto error_key;
 	}
 
-	if (test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags))
+	down_write(&dvnode->validate_lock);
+	if (test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags) &&
+	    dvnode->status.data_version == data_version)
 		afs_edit_dir_add(dvnode, &dentry->d_name, &iget_data.fid,
 				 afs_edit_dir_for_symlink);
+	up_write(&dvnode->validate_lock);
 
 	key_put(key);
 	kfree(scb);
@@ -1812,6 +1838,8 @@ static int afs_rename(struct inode *old_dir, struct dentry *old_dentry,
 	struct dentry *tmp = NULL, *rehash = NULL;
 	struct inode *new_inode;
 	struct key *key;
+	afs_dataversion_t orig_data_version;
+	afs_dataversion_t new_data_version;
 	bool new_negative = d_is_negative(new_dentry);
 	int ret;
 
@@ -1890,10 +1918,6 @@ static int afs_rename(struct inode *old_dir, struct dentry *old_dentry,
 
 	ret = -ERESTARTSYS;
 	if (afs_begin_vnode_operation(&fc, orig_dvnode, key, true)) {
-		afs_dataversion_t orig_data_version;
-		afs_dataversion_t new_data_version;
-		struct afs_status_cb *new_scb = &scb[1];
-
 		orig_data_version = orig_dvnode->status.data_version + 1;
 
 		if (orig_dvnode != new_dvnode) {
@@ -1904,7 +1928,6 @@ static int afs_rename(struct inode *old_dir, struct dentry *old_dentry,
 			new_data_version = new_dvnode->status.data_version + 1;
 		} else {
 			new_data_version = orig_data_version;
-			new_scb = &scb[0];
 		}
 
 		while (afs_select_fileserver(&fc)) {
@@ -1912,7 +1935,7 @@ static int afs_rename(struct inode *old_dir, struct dentry *old_dentry,
 			fc.cb_break_2 = afs_calc_vnode_cb_break(new_dvnode);
 			afs_fs_rename(&fc, old_dentry->d_name.name,
 				      new_dvnode, new_dentry->d_name.name,
-				      &scb[0], new_scb);
+				      &scb[0], &scb[1]);
 		}
 
 		afs_vnode_commit_status(&fc, orig_dvnode, fc.cb_break,
@@ -1930,18 +1953,25 @@ static int afs_rename(struct inode *old_dir, struct dentry *old_dentry,
 	if (ret == 0) {
 		if (rehash)
 			d_rehash(rehash);
-		if (test_bit(AFS_VNODE_DIR_VALID, &orig_dvnode->flags))
-		    afs_edit_dir_remove(orig_dvnode, &old_dentry->d_name,
-					afs_edit_dir_for_rename_0);
+		down_write(&orig_dvnode->validate_lock);
+		if (test_bit(AFS_VNODE_DIR_VALID, &orig_dvnode->flags) &&
+		    orig_dvnode->status.data_version == orig_data_version)
+			afs_edit_dir_remove(orig_dvnode, &old_dentry->d_name,
+					    afs_edit_dir_for_rename_0);
+		if (orig_dvnode != new_dvnode) {
+			up_write(&orig_dvnode->validate_lock);
 
-		if (!new_negative &&
-		    test_bit(AFS_VNODE_DIR_VALID, &new_dvnode->flags))
-			afs_edit_dir_remove(new_dvnode, &new_dentry->d_name,
-					    afs_edit_dir_for_rename_1);
+			down_write(&new_dvnode->validate_lock);
+		}
+		if (test_bit(AFS_VNODE_DIR_VALID, &new_dvnode->flags) &&
+		    orig_dvnode->status.data_version == new_data_version) {
+			if (!new_negative)
+				afs_edit_dir_remove(new_dvnode, &new_dentry->d_name,
+						    afs_edit_dir_for_rename_1);
 
-		if (test_bit(AFS_VNODE_DIR_VALID, &new_dvnode->flags))
 			afs_edit_dir_add(new_dvnode, &new_dentry->d_name,
 					 &vnode->fid, afs_edit_dir_for_rename_2);
+		}
 
 		new_inode = d_inode(new_dentry);
 		if (new_inode) {
@@ -1957,14 +1987,10 @@ static int afs_rename(struct inode *old_dir, struct dentry *old_dentry,
 		 * Note that if we ever implement RENAME_EXCHANGE, we'll have
 		 * to update both dentries with opposing dir versions.
 		 */
-		if (new_dvnode != orig_dvnode) {
-			afs_update_dentry_version(&fc, old_dentry, &scb[1]);
-			afs_update_dentry_version(&fc, new_dentry, &scb[1]);
-		} else {
-			afs_update_dentry_version(&fc, old_dentry, &scb[0]);
-			afs_update_dentry_version(&fc, new_dentry, &scb[0]);
-		}
+		afs_update_dentry_version(&fc, old_dentry, &scb[1]);
+		afs_update_dentry_version(&fc, new_dentry, &scb[1]);
 		d_move(old_dentry, new_dentry);
+		up_write(&new_dvnode->validate_lock);
 		goto error_tmp;
 	}
 
diff --git a/fs/afs/dir_silly.c b/fs/afs/dir_silly.c
index 361088a..d94e2b7 100644
--- a/fs/afs/dir_silly.c
+++ b/fs/afs/dir_silly.c
@@ -21,6 +21,7 @@ static int afs_do_silly_rename(struct afs_vnode *dvnode, struct afs_vnode *vnode
 {
 	struct afs_fs_cursor fc;
 	struct afs_status_cb *scb;
+	afs_dataversion_t dir_data_version;
 	int ret = -ERESTARTSYS;
 
 	_enter("%pd,%pd", old, new);
@@ -31,7 +32,7 @@ static int afs_do_silly_rename(struct afs_vnode *dvnode, struct afs_vnode *vnode
 
 	trace_afs_silly_rename(vnode, false);
 	if (afs_begin_vnode_operation(&fc, dvnode, key, true)) {
-		afs_dataversion_t dir_data_version = dvnode->status.data_version + 1;
+		dir_data_version = dvnode->status.data_version + 1;
 
 		while (afs_select_fileserver(&fc)) {
 			fc.cb_break = afs_calc_vnode_cb_break(dvnode);
@@ -54,12 +55,15 @@ static int afs_do_silly_rename(struct afs_vnode *dvnode, struct afs_vnode *vnode
 			dvnode->silly_key = key_get(key);
 		}
 
-		if (test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags))
+		down_write(&dvnode->validate_lock);
+		if (test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags) &&
+		    dvnode->status.data_version == dir_data_version) {
 			afs_edit_dir_remove(dvnode, &old->d_name,
 					    afs_edit_dir_for_silly_0);
-		if (test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags))
 			afs_edit_dir_add(dvnode, &new->d_name,
 					 &vnode->fid, afs_edit_dir_for_silly_1);
+		}
+		up_write(&dvnode->validate_lock);
 	}
 
 	kfree(scb);
@@ -181,10 +185,14 @@ static int afs_do_silly_unlink(struct afs_vnode *dvnode, struct afs_vnode *vnode
 				clear_bit(AFS_VNODE_CB_PROMISED, &vnode->flags);
 			}
 		}
-		if (ret == 0 &&
-		    test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags))
-			afs_edit_dir_remove(dvnode, &dentry->d_name,
-					    afs_edit_dir_for_unlink);
+		if (ret == 0) {
+			down_write(&dvnode->validate_lock);
+			if (test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags) &&
+			    dvnode->status.data_version == dir_data_version)
+				afs_edit_dir_remove(dvnode, &dentry->d_name,
+						    afs_edit_dir_for_unlink);
+			up_write(&dvnode->validate_lock);
+		}
 	}
 
 	kfree(scb);
diff --git a/fs/afs/fsclient.c b/fs/afs/fsclient.c
index 1f9c5d8..68fc466 100644
--- a/fs/afs/fsclient.c
+++ b/fs/afs/fsclient.c
@@ -65,6 +65,7 @@ static int xdr_decode_AFSFetchStatus(const __be32 **_bp,
 	bool inline_error = (call->operation_ID == afs_FS_InlineBulkStatus);
 	u64 data_version, size;
 	u32 type, abort_code;
+	int ret;
 
 	abort_code = ntohl(xdr->abort_code);
 
@@ -78,7 +79,7 @@ static int xdr_decode_AFSFetchStatus(const __be32 **_bp,
 			 */
 			status->abort_code = abort_code;
 			scb->have_error = true;
-			return 0;
+			goto good;
 		}
 
 		pr_warn("Unknown AFSFetchStatus version %u\n", ntohl(xdr->if_version));
@@ -87,7 +88,8 @@ static int xdr_decode_AFSFetchStatus(const __be32 **_bp,
 
 	if (abort_code != 0 && inline_error) {
 		status->abort_code = abort_code;
-		return 0;
+		scb->have_error = true;
+		goto good;
 	}
 
 	type = ntohl(xdr->type);
@@ -123,13 +125,16 @@ static int xdr_decode_AFSFetchStatus(const __be32 **_bp,
 	data_version |= (u64)ntohl(xdr->data_version_hi) << 32;
 	status->data_version = data_version;
 	scb->have_status = true;
-
+good:
+	ret = 0;
+advance:
 	*_bp = (const void *)*_bp + sizeof(*xdr);
-	return 0;
+	return ret;
 
 bad:
 	xdr_dump_bad(*_bp);
-	return afs_protocol_error(call, -EBADMSG, afs_eproto_bad_status);
+	ret = afs_protocol_error(call, -EBADMSG, afs_eproto_bad_status);
+	goto advance;
 }
 
 static time64_t xdr_decode_expiry(struct afs_call *call, u32 expiry)
@@ -981,16 +986,16 @@ static int afs_deliver_fs_rename(struct afs_call *call)
 	if (ret < 0)
 		return ret;
 
-	/* unmarshall the reply once we've received all of it */
+	/* If the two dirs are the same, we have two copies of the same status
+	 * report, so we just decode it twice.
+	 */
 	bp = call->buffer;
 	ret = xdr_decode_AFSFetchStatus(&bp, call, call->out_dir_scb);
 	if (ret < 0)
 		return ret;
-	if (call->out_dir_scb != call->out_scb) {
-		ret = xdr_decode_AFSFetchStatus(&bp, call, call->out_scb);
-		if (ret < 0)
-			return ret;
-	}
+	ret = xdr_decode_AFSFetchStatus(&bp, call, call->out_scb);
+	if (ret < 0)
+		return ret;
 	xdr_decode_AFSVolSync(&bp, call->out_volsync);
 
 	_leave(" = 0 [done]");
diff --git a/fs/afs/yfsclient.c b/fs/afs/yfsclient.c
index a26126a..b5b45c5 100644
--- a/fs/afs/yfsclient.c
+++ b/fs/afs/yfsclient.c
@@ -165,15 +165,15 @@ static void xdr_dump_bad(const __be32 *bp)
 	int i;
 
 	pr_notice("YFS XDR: Bad status record\n");
-	for (i = 0; i < 5 * 4 * 4; i += 16) {
+	for (i = 0; i < 6 * 4 * 4; i += 16) {
 		memcpy(x, bp, 16);
 		bp += 4;
 		pr_notice("%03x: %08x %08x %08x %08x\n",
 			  i, ntohl(x[0]), ntohl(x[1]), ntohl(x[2]), ntohl(x[3]));
 	}
 
-	memcpy(x, bp, 4);
-	pr_notice("0x50: %08x\n", ntohl(x[0]));
+	memcpy(x, bp, 8);
+	pr_notice("0x60: %08x %08x\n", ntohl(x[0]), ntohl(x[1]));
 }
 
 /*
@@ -186,13 +186,14 @@ static int xdr_decode_YFSFetchStatus(const __be32 **_bp,
 	const struct yfs_xdr_YFSFetchStatus *xdr = (const void *)*_bp;
 	struct afs_file_status *status = &scb->status;
 	u32 type;
+	int ret;
 
 	status->abort_code = ntohl(xdr->abort_code);
 	if (status->abort_code != 0) {
 		if (status->abort_code == VNOVNODE)
 			status->nlink = 0;
 		scb->have_error = true;
-		return 0;
+		goto good;
 	}
 
 	type = ntohl(xdr->type);
@@ -220,13 +221,16 @@ static int xdr_decode_YFSFetchStatus(const __be32 **_bp,
 	status->size		= xdr_to_u64(xdr->size);
 	status->data_version	= xdr_to_u64(xdr->data_version);
 	scb->have_status	= true;
-
+good:
+	ret = 0;
+advance:
 	*_bp += xdr_size(xdr);
-	return 0;
+	return ret;
 
 bad:
 	xdr_dump_bad(*_bp);
-	return afs_protocol_error(call, -EBADMSG, afs_eproto_bad_status);
+	ret = afs_protocol_error(call, -EBADMSG, afs_eproto_bad_status);
+	goto advance;
 }
 
 /*
@@ -1153,11 +1157,9 @@ static int yfs_deliver_fs_rename(struct afs_call *call)
 	ret = xdr_decode_YFSFetchStatus(&bp, call, call->out_dir_scb);
 	if (ret < 0)
 		return ret;
-	if (call->out_dir_scb != call->out_scb) {
-		ret = xdr_decode_YFSFetchStatus(&bp, call, call->out_scb);
-		if (ret < 0)
-			return ret;
-	}
+	ret = xdr_decode_YFSFetchStatus(&bp, call, call->out_scb);
+	if (ret < 0)
+		return ret;
 
 	xdr_decode_YFSVolSync(&bp, call->out_volsync);
 	_leave(" = 0 [done]");
diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index f4713ea..13f25e2 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -27,6 +27,7 @@
 #include <linux/highuid.h>
 #include <linux/compiler.h>
 #include <linux/highmem.h>
+#include <linux/hugetlb.h>
 #include <linux/pagemap.h>
 #include <linux/vmalloc.h>
 #include <linux/security.h>
@@ -698,19 +699,11 @@ static int load_elf_binary(struct linux_binprm *bprm)
 	unsigned long reloc_func_desc __maybe_unused = 0;
 	int executable_stack = EXSTACK_DEFAULT;
 	struct elfhdr *elf_ex = (struct elfhdr *)bprm->buf;
-	struct {
-		struct elfhdr interp_elf_ex;
-	} *loc;
+	struct elfhdr *interp_elf_ex = NULL;
 	struct arch_elf_state arch_state = INIT_ARCH_ELF_STATE;
 	struct mm_struct *mm;
 	struct pt_regs *regs;
 
-	loc = kmalloc(sizeof(*loc), GFP_KERNEL);
-	if (!loc) {
-		retval = -ENOMEM;
-		goto out_ret;
-	}
-
 	retval = -ENOEXEC;
 	/* First of all, some simple consistency checks */
 	if (memcmp(elf_ex->e_ident, ELFMAG, SELFMAG) != 0)
@@ -770,9 +763,15 @@ static int load_elf_binary(struct linux_binprm *bprm)
 		 */
 		would_dump(bprm, interpreter);
 
+		interp_elf_ex = kmalloc(sizeof(*interp_elf_ex), GFP_KERNEL);
+		if (!interp_elf_ex) {
+			retval = -ENOMEM;
+			goto out_free_ph;
+		}
+
 		/* Get the exec headers */
-		retval = elf_read(interpreter, &loc->interp_elf_ex,
-				  sizeof(loc->interp_elf_ex), 0);
+		retval = elf_read(interpreter, interp_elf_ex,
+				  sizeof(*interp_elf_ex), 0);
 		if (retval < 0)
 			goto out_free_dentry;
 
@@ -806,25 +805,25 @@ static int load_elf_binary(struct linux_binprm *bprm)
 	if (interpreter) {
 		retval = -ELIBBAD;
 		/* Not an ELF interpreter */
-		if (memcmp(loc->interp_elf_ex.e_ident, ELFMAG, SELFMAG) != 0)
+		if (memcmp(interp_elf_ex->e_ident, ELFMAG, SELFMAG) != 0)
 			goto out_free_dentry;
 		/* Verify the interpreter has a valid arch */
-		if (!elf_check_arch(&loc->interp_elf_ex) ||
-		    elf_check_fdpic(&loc->interp_elf_ex))
+		if (!elf_check_arch(interp_elf_ex) ||
+		    elf_check_fdpic(interp_elf_ex))
 			goto out_free_dentry;
 
 		/* Load the interpreter program headers */
-		interp_elf_phdata = load_elf_phdrs(&loc->interp_elf_ex,
+		interp_elf_phdata = load_elf_phdrs(interp_elf_ex,
 						   interpreter);
 		if (!interp_elf_phdata)
 			goto out_free_dentry;
 
 		/* Pass PT_LOPROC..PT_HIPROC headers to arch code */
 		elf_ppnt = interp_elf_phdata;
-		for (i = 0; i < loc->interp_elf_ex.e_phnum; i++, elf_ppnt++)
+		for (i = 0; i < interp_elf_ex->e_phnum; i++, elf_ppnt++)
 			switch (elf_ppnt->p_type) {
 			case PT_LOPROC ... PT_HIPROC:
-				retval = arch_elf_pt_proc(&loc->interp_elf_ex,
+				retval = arch_elf_pt_proc(interp_elf_ex,
 							  elf_ppnt, interpreter,
 							  true, &arch_state);
 				if (retval)
@@ -839,7 +838,7 @@ static int load_elf_binary(struct linux_binprm *bprm)
 	 * the exec syscall.
 	 */
 	retval = arch_check_elf(elf_ex,
-				!!interpreter, &loc->interp_elf_ex,
+				!!interpreter, interp_elf_ex,
 				&arch_state);
 	if (retval)
 		goto out_free_dentry;
@@ -1055,7 +1054,7 @@ static int load_elf_binary(struct linux_binprm *bprm)
 	}
 
 	if (interpreter) {
-		elf_entry = load_elf_interp(&loc->interp_elf_ex,
+		elf_entry = load_elf_interp(interp_elf_ex,
 					    interpreter,
 					    load_bias, interp_elf_phdata);
 		if (!IS_ERR((void *)elf_entry)) {
@@ -1064,7 +1063,7 @@ static int load_elf_binary(struct linux_binprm *bprm)
 			 * adjustment
 			 */
 			interp_load_addr = elf_entry;
-			elf_entry += loc->interp_elf_ex.e_entry;
+			elf_entry += interp_elf_ex->e_entry;
 		}
 		if (BAD_ADDR(elf_entry)) {
 			retval = IS_ERR((void *)elf_entry) ?
@@ -1075,6 +1074,9 @@ static int load_elf_binary(struct linux_binprm *bprm)
 
 		allow_write_access(interpreter);
 		fput(interpreter);
+
+		kfree(interp_elf_ex);
+		kfree(interp_elf_phdata);
 	} else {
 		elf_entry = e_entry;
 		if (BAD_ADDR(elf_entry)) {
@@ -1083,7 +1085,6 @@ static int load_elf_binary(struct linux_binprm *bprm)
 		}
 	}
 
-	kfree(interp_elf_phdata);
 	kfree(elf_phdata);
 
 	set_binfmt(&elf_format);
@@ -1153,12 +1154,11 @@ static int load_elf_binary(struct linux_binprm *bprm)
 	start_thread(regs, elf_entry, bprm->p);
 	retval = 0;
 out:
-	kfree(loc);
-out_ret:
 	return retval;
 
 	/* error cleanup */
 out_free_dentry:
+	kfree(interp_elf_ex);
 	kfree(interp_elf_phdata);
 	allow_write_access(interpreter);
 	if (interpreter)
@@ -1317,7 +1317,7 @@ static unsigned long vma_dump_size(struct vm_area_struct *vma,
 	}
 
 	/* Hugetlb memory check */
-	if (vma->vm_flags & VM_HUGETLB) {
+	if (is_vm_hugetlb_page(vma)) {
 		if ((vma->vm_flags & VM_SHARED) && FILTER(HUGETLB_SHARED))
 			goto whole;
 		if (!(vma->vm_flags & VM_SHARED) && FILTER(HUGETLB_PRIVATE))
diff --git a/fs/btrfs/block-group.c b/fs/btrfs/block-group.c
index 786849f..47f66c6 100644
--- a/fs/btrfs/block-group.c
+++ b/fs/btrfs/block-group.c
@@ -3370,6 +3370,7 @@ int btrfs_free_block_groups(struct btrfs_fs_info *info)
 			    space_info->bytes_reserved > 0 ||
 			    space_info->bytes_may_use > 0))
 			btrfs_dump_space_info(info, space_info, 0, 0);
+		WARN_ON(space_info->reclaim_size > 0);
 		list_del(&space_info->list);
 		btrfs_sysfs_remove_space_info(space_info);
 	}
diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index 8a144f9..719e68a 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -2098,6 +2098,21 @@ int btrfs_sync_file(struct file *file, loff_t start, loff_t end, int datasync)
 	atomic_inc(&root->log_batch);
 
 	/*
+	 * If the inode needs a full sync, make sure we use a full range to
+	 * avoid log tree corruption, due to hole detection racing with ordered
+	 * extent completion for adjacent ranges and races between logging and
+	 * completion of ordered extents for adjancent ranges - both races
+	 * could lead to file extent items in the log with overlapping ranges.
+	 * Do this while holding the inode lock, to avoid races with other
+	 * tasks.
+	 */
+	if (test_bit(BTRFS_INODE_NEEDS_FULL_SYNC,
+		     &BTRFS_I(inode)->runtime_flags)) {
+		start = 0;
+		end = LLONG_MAX;
+	}
+
+	/*
 	 * Before we acquired the inode's lock, someone may have dirtied more
 	 * pages in the target range. We need to make sure that writeback for
 	 * any such pages does not start while we are logging the inode, because
diff --git a/fs/btrfs/reflink.c b/fs/btrfs/reflink.c
index d197314..040009d 100644
--- a/fs/btrfs/reflink.c
+++ b/fs/btrfs/reflink.c
@@ -264,6 +264,7 @@ static int clone_copy_inline_extent(struct inode *dst,
 			    size);
 	inode_add_bytes(dst, datal);
 	set_bit(BTRFS_INODE_NEEDS_FULL_SYNC, &BTRFS_I(dst)->runtime_flags);
+	ret = btrfs_inode_set_file_extent_range(BTRFS_I(dst), 0, aligned_end);
 out:
 	if (!ret && !trans) {
 		/*
diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c
index f655956..d35936c 100644
--- a/fs/btrfs/relocation.c
+++ b/fs/btrfs/relocation.c
@@ -611,8 +611,8 @@ static int should_ignore_root(struct btrfs_root *root)
 	if (!reloc_root)
 		return 0;
 
-	if (btrfs_root_last_snapshot(&reloc_root->root_item) ==
-	    root->fs_info->running_transaction->transid - 1)
+	if (btrfs_header_generation(reloc_root->commit_root) ==
+	    root->fs_info->running_transaction->transid)
 		return 0;
 	/*
 	 * if there is reloc tree and it was created in previous
@@ -1527,8 +1527,7 @@ int btrfs_init_reloc_root(struct btrfs_trans_handle *trans,
 	int clear_rsv = 0;
 	int ret;
 
-	if (!rc || !rc->create_reloc_tree ||
-	    root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID)
+	if (!rc)
 		return 0;
 
 	/*
@@ -1538,12 +1537,28 @@ int btrfs_init_reloc_root(struct btrfs_trans_handle *trans,
 	if (reloc_root_is_dead(root))
 		return 0;
 
+	/*
+	 * This is subtle but important.  We do not do
+	 * record_root_in_transaction for reloc roots, instead we record their
+	 * corresponding fs root, and then here we update the last trans for the
+	 * reloc root.  This means that we have to do this for the entire life
+	 * of the reloc root, regardless of which stage of the relocation we are
+	 * in.
+	 */
 	if (root->reloc_root) {
 		reloc_root = root->reloc_root;
 		reloc_root->last_trans = trans->transid;
 		return 0;
 	}
 
+	/*
+	 * We are merging reloc roots, we do not need new reloc trees.  Also
+	 * reloc trees never need their own reloc tree.
+	 */
+	if (!rc->create_reloc_tree ||
+	    root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID)
+		return 0;
+
 	if (!trans->reloc_reserved) {
 		rsv = trans->block_rsv;
 		trans->block_rsv = rc->block_rsv;
diff --git a/fs/btrfs/space-info.c b/fs/btrfs/space-info.c
index 8b0fe05..ff17a44 100644
--- a/fs/btrfs/space-info.c
+++ b/fs/btrfs/space-info.c
@@ -361,6 +361,16 @@ int btrfs_can_overcommit(struct btrfs_fs_info *fs_info,
 	return 0;
 }
 
+static void remove_ticket(struct btrfs_space_info *space_info,
+			  struct reserve_ticket *ticket)
+{
+	if (!list_empty(&ticket->list)) {
+		list_del_init(&ticket->list);
+		ASSERT(space_info->reclaim_size >= ticket->bytes);
+		space_info->reclaim_size -= ticket->bytes;
+	}
+}
+
 /*
  * This is for space we already have accounted in space_info->bytes_may_use, so
  * basically when we're returning space from block_rsv's.
@@ -388,9 +398,7 @@ void btrfs_try_granting_tickets(struct btrfs_fs_info *fs_info,
 			btrfs_space_info_update_bytes_may_use(fs_info,
 							      space_info,
 							      ticket->bytes);
-			list_del_init(&ticket->list);
-			ASSERT(space_info->reclaim_size >= ticket->bytes);
-			space_info->reclaim_size -= ticket->bytes;
+			remove_ticket(space_info, ticket);
 			ticket->bytes = 0;
 			space_info->tickets_id++;
 			wake_up(&ticket->wait);
@@ -899,7 +907,7 @@ static bool maybe_fail_all_tickets(struct btrfs_fs_info *fs_info,
 			btrfs_info(fs_info, "failing ticket with %llu bytes",
 				   ticket->bytes);
 
-		list_del_init(&ticket->list);
+		remove_ticket(space_info, ticket);
 		ticket->error = -ENOSPC;
 		wake_up(&ticket->wait);
 
@@ -1063,7 +1071,7 @@ static void wait_reserve_ticket(struct btrfs_fs_info *fs_info,
 			 * despite getting an error, resulting in a space leak
 			 * (bytes_may_use counter of our space_info).
 			 */
-			list_del_init(&ticket->list);
+			remove_ticket(space_info, ticket);
 			ticket->error = -EINTR;
 			break;
 		}
@@ -1121,7 +1129,7 @@ static int handle_reserve_ticket(struct btrfs_fs_info *fs_info,
 		 * either the async reclaim job deletes the ticket from the list
 		 * or we delete it ourselves at wait_reserve_ticket().
 		 */
-		list_del_init(&ticket->list);
+		remove_ticket(space_info, ticket);
 		if (!ret)
 			ret = -ENOSPC;
 	}
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index 58c1114..ec36a7c 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -96,8 +96,8 @@ enum {
 static int btrfs_log_inode(struct btrfs_trans_handle *trans,
 			   struct btrfs_root *root, struct btrfs_inode *inode,
 			   int inode_only,
-			   u64 start,
-			   u64 end,
+			   const loff_t start,
+			   const loff_t end,
 			   struct btrfs_log_ctx *ctx);
 static int link_to_fixup_dir(struct btrfs_trans_handle *trans,
 			     struct btrfs_root *root,
@@ -4533,15 +4533,13 @@ static int btrfs_log_all_xattrs(struct btrfs_trans_handle *trans,
 static int btrfs_log_holes(struct btrfs_trans_handle *trans,
 			   struct btrfs_root *root,
 			   struct btrfs_inode *inode,
-			   struct btrfs_path *path,
-			   const u64 start,
-			   const u64 end)
+			   struct btrfs_path *path)
 {
 	struct btrfs_fs_info *fs_info = root->fs_info;
 	struct btrfs_key key;
 	const u64 ino = btrfs_ino(inode);
 	const u64 i_size = i_size_read(&inode->vfs_inode);
-	u64 prev_extent_end = start;
+	u64 prev_extent_end = 0;
 	int ret;
 
 	if (!btrfs_fs_incompat(fs_info, NO_HOLES) || i_size == 0)
@@ -4549,21 +4547,14 @@ static int btrfs_log_holes(struct btrfs_trans_handle *trans,
 
 	key.objectid = ino;
 	key.type = BTRFS_EXTENT_DATA_KEY;
-	key.offset = start;
+	key.offset = 0;
 
 	ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
 	if (ret < 0)
 		return ret;
 
-	if (ret > 0 && path->slots[0] > 0) {
-		btrfs_item_key_to_cpu(path->nodes[0], &key, path->slots[0] - 1);
-		if (key.objectid == ino && key.type == BTRFS_EXTENT_DATA_KEY)
-			path->slots[0]--;
-	}
-
 	while (true) {
 		struct extent_buffer *leaf = path->nodes[0];
-		u64 extent_end;
 
 		if (path->slots[0] >= btrfs_header_nritems(path->nodes[0])) {
 			ret = btrfs_next_leaf(root, path);
@@ -4580,18 +4571,9 @@ static int btrfs_log_holes(struct btrfs_trans_handle *trans,
 		if (key.objectid != ino || key.type != BTRFS_EXTENT_DATA_KEY)
 			break;
 
-		extent_end = btrfs_file_extent_end(path);
-		if (extent_end <= start)
-			goto next_slot;
-
 		/* We have a hole, log it. */
 		if (prev_extent_end < key.offset) {
-			u64 hole_len;
-
-			if (key.offset >= end)
-				hole_len = end - prev_extent_end;
-			else
-				hole_len = key.offset - prev_extent_end;
+			const u64 hole_len = key.offset - prev_extent_end;
 
 			/*
 			 * Release the path to avoid deadlocks with other code
@@ -4621,20 +4603,16 @@ static int btrfs_log_holes(struct btrfs_trans_handle *trans,
 			leaf = path->nodes[0];
 		}
 
-		prev_extent_end = min(extent_end, end);
-		if (extent_end >= end)
-			break;
-next_slot:
+		prev_extent_end = btrfs_file_extent_end(path);
 		path->slots[0]++;
 		cond_resched();
 	}
 
-	if (prev_extent_end < end && prev_extent_end < i_size) {
+	if (prev_extent_end < i_size) {
 		u64 hole_len;
 
 		btrfs_release_path(path);
-		hole_len = min(ALIGN(i_size, fs_info->sectorsize), end);
-		hole_len -= prev_extent_end;
+		hole_len = ALIGN(i_size - prev_extent_end, fs_info->sectorsize);
 		ret = btrfs_insert_file_extent(trans, root->log_root,
 					       ino, prev_extent_end, 0, 0,
 					       hole_len, 0, hole_len,
@@ -4971,8 +4949,6 @@ static int copy_inode_items_to_log(struct btrfs_trans_handle *trans,
 				   const u64 logged_isize,
 				   const bool recursive_logging,
 				   const int inode_only,
-				   const u64 start,
-				   const u64 end,
 				   struct btrfs_log_ctx *ctx,
 				   bool *need_log_inode_item)
 {
@@ -4981,21 +4957,6 @@ static int copy_inode_items_to_log(struct btrfs_trans_handle *trans,
 	int ins_nr = 0;
 	int ret;
 
-	/*
-	 * We must make sure we don't copy extent items that are entirely out of
-	 * the range [start, end - 1]. This is not just an optimization to avoid
-	 * copying but also needed to avoid a corruption where we end up with
-	 * file extent items in the log tree that have overlapping ranges - this
-	 * can happen if we race with ordered extent completion for ranges that
-	 * are outside our target range. For example we copy an extent item and
-	 * when we move to the next leaf, that extent was trimmed and a new one
-	 * covering a subrange of it, but with a higher key, was inserted - we
-	 * would then copy this other extent too, resulting in a log tree with
-	 * 2 extent items that represent overlapping ranges.
-	 *
-	 * We can copy the entire extents at the range bondaries however, even
-	 * if they cover an area outside the target range. That's ok.
-	 */
 	while (1) {
 		ret = btrfs_search_forward(root, min_key, path, trans->transid);
 		if (ret < 0)
@@ -5063,29 +5024,6 @@ static int copy_inode_items_to_log(struct btrfs_trans_handle *trans,
 			goto next_slot;
 		}
 
-		if (min_key->type == BTRFS_EXTENT_DATA_KEY) {
-			const u64 extent_end = btrfs_file_extent_end(path);
-
-			if (extent_end <= start) {
-				if (ins_nr > 0) {
-					ret = copy_items(trans, inode, dst_path,
-							 path, ins_start_slot,
-							 ins_nr, inode_only,
-							 logged_isize);
-					if (ret < 0)
-						return ret;
-					ins_nr = 0;
-				}
-				goto next_slot;
-			}
-			if (extent_end >= end) {
-				ins_nr++;
-				if (ins_nr == 1)
-					ins_start_slot = path->slots[0];
-				break;
-			}
-		}
-
 		if (ins_nr && ins_start_slot + ins_nr == path->slots[0]) {
 			ins_nr++;
 			goto next_slot;
@@ -5151,8 +5089,8 @@ static int copy_inode_items_to_log(struct btrfs_trans_handle *trans,
 static int btrfs_log_inode(struct btrfs_trans_handle *trans,
 			   struct btrfs_root *root, struct btrfs_inode *inode,
 			   int inode_only,
-			   u64 start,
-			   u64 end,
+			   const loff_t start,
+			   const loff_t end,
 			   struct btrfs_log_ctx *ctx)
 {
 	struct btrfs_fs_info *fs_info = root->fs_info;
@@ -5180,9 +5118,6 @@ static int btrfs_log_inode(struct btrfs_trans_handle *trans,
 		return -ENOMEM;
 	}
 
-	start = ALIGN_DOWN(start, fs_info->sectorsize);
-	end = ALIGN(end, fs_info->sectorsize);
-
 	min_key.objectid = ino;
 	min_key.type = BTRFS_INODE_ITEM_KEY;
 	min_key.offset = 0;
@@ -5298,8 +5233,8 @@ static int btrfs_log_inode(struct btrfs_trans_handle *trans,
 
 	err = copy_inode_items_to_log(trans, inode, &min_key, &max_key,
 				      path, dst_path, logged_isize,
-				      recursive_logging, inode_only,
-				      start, end, ctx, &need_log_inode_item);
+				      recursive_logging, inode_only, ctx,
+				      &need_log_inode_item);
 	if (err)
 		goto out_unlock;
 
@@ -5312,7 +5247,7 @@ static int btrfs_log_inode(struct btrfs_trans_handle *trans,
 	if (max_key.type >= BTRFS_EXTENT_DATA_KEY && !fast_search) {
 		btrfs_release_path(path);
 		btrfs_release_path(dst_path);
-		err = btrfs_log_holes(trans, root, inode, path, start, end);
+		err = btrfs_log_holes(trans, root, inode, path);
 		if (err)
 			goto out_unlock;
 	}
diff --git a/fs/buffer.c b/fs/buffer.c
index f73276d..599a0bf 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -1371,6 +1371,17 @@ void __breadahead(struct block_device *bdev, sector_t block, unsigned size)
 }
 EXPORT_SYMBOL(__breadahead);
 
+void __breadahead_gfp(struct block_device *bdev, sector_t block, unsigned size,
+		      gfp_t gfp)
+{
+	struct buffer_head *bh = __getblk_gfp(bdev, block, size, gfp);
+	if (likely(bh)) {
+		ll_rw_block(REQ_OP_READ, REQ_RAHEAD, 1, &bh);
+		brelse(bh);
+	}
+}
+EXPORT_SYMBOL(__breadahead_gfp);
+
 /**
  *  __bread_gfp() - reads a specified block and returns the bh
  *  @bdev: the block_device to read from
diff --git a/fs/ceph/addr.c b/fs/ceph/addr.c
index 7ab6166..6f4678d 100644
--- a/fs/ceph/addr.c
+++ b/fs/ceph/addr.c
@@ -159,8 +159,6 @@ static void ceph_invalidatepage(struct page *page, unsigned int offset,
 	if (!PagePrivate(page))
 		return;
 
-	ClearPageChecked(page);
-
 	dout("%p invalidatepage %p idx %lu full dirty page\n",
 	     inode, page, page->index);
 
@@ -183,6 +181,47 @@ static int ceph_releasepage(struct page *page, gfp_t g)
 }
 
 /*
+ * Read some contiguous pages.  If we cross a stripe boundary, shorten
+ * *plen.  Return number of bytes read, or error.
+ */
+static int ceph_sync_readpages(struct ceph_fs_client *fsc,
+			       struct ceph_vino vino,
+			       struct ceph_file_layout *layout,
+			       u64 off, u64 *plen,
+			       u32 truncate_seq, u64 truncate_size,
+			       struct page **pages, int num_pages,
+			       int page_align)
+{
+	struct ceph_osd_client *osdc = &fsc->client->osdc;
+	struct ceph_osd_request *req;
+	int rc = 0;
+
+	dout("readpages on ino %llx.%llx on %llu~%llu\n", vino.ino,
+	     vino.snap, off, *plen);
+	req = ceph_osdc_new_request(osdc, layout, vino, off, plen, 0, 1,
+				    CEPH_OSD_OP_READ, CEPH_OSD_FLAG_READ,
+				    NULL, truncate_seq, truncate_size,
+				    false);
+	if (IS_ERR(req))
+		return PTR_ERR(req);
+
+	/* it may be a short read due to an object boundary */
+	osd_req_op_extent_osd_data_pages(req, 0,
+				pages, *plen, page_align, false, false);
+
+	dout("readpages  final extent is %llu~%llu (%llu bytes align %d)\n",
+	     off, *plen, *plen, page_align);
+
+	rc = ceph_osdc_start_request(osdc, req, false);
+	if (!rc)
+		rc = ceph_osdc_wait_request(osdc, req);
+
+	ceph_osdc_put_request(req);
+	dout("readpages result %d\n", rc);
+	return rc;
+}
+
+/*
  * read a single page, without unlocking it.
  */
 static int ceph_do_readpage(struct file *filp, struct page *page)
@@ -218,7 +257,7 @@ static int ceph_do_readpage(struct file *filp, struct page *page)
 
 	dout("readpage inode %p file %p page %p index %lu\n",
 	     inode, filp, page, page->index);
-	err = ceph_osdc_readpages(&fsc->client->osdc, ceph_vino(inode),
+	err = ceph_sync_readpages(fsc, ceph_vino(inode),
 				  &ci->i_layout, off, &len,
 				  ci->i_truncate_seq, ci->i_truncate_size,
 				  &page, 1, 0);
@@ -571,6 +610,47 @@ static u64 get_writepages_data_length(struct inode *inode,
 }
 
 /*
+ * do a synchronous write on N pages
+ */
+static int ceph_sync_writepages(struct ceph_fs_client *fsc,
+				struct ceph_vino vino,
+				struct ceph_file_layout *layout,
+				struct ceph_snap_context *snapc,
+				u64 off, u64 len,
+				u32 truncate_seq, u64 truncate_size,
+				struct timespec64 *mtime,
+				struct page **pages, int num_pages)
+{
+	struct ceph_osd_client *osdc = &fsc->client->osdc;
+	struct ceph_osd_request *req;
+	int rc = 0;
+	int page_align = off & ~PAGE_MASK;
+
+	req = ceph_osdc_new_request(osdc, layout, vino, off, &len, 0, 1,
+				    CEPH_OSD_OP_WRITE, CEPH_OSD_FLAG_WRITE,
+				    snapc, truncate_seq, truncate_size,
+				    true);
+	if (IS_ERR(req))
+		return PTR_ERR(req);
+
+	/* it may be a short write due to an object boundary */
+	osd_req_op_extent_osd_data_pages(req, 0, pages, len, page_align,
+				false, false);
+	dout("writepages %llu~%llu (%llu bytes)\n", off, len, len);
+
+	req->r_mtime = *mtime;
+	rc = ceph_osdc_start_request(osdc, req, true);
+	if (!rc)
+		rc = ceph_osdc_wait_request(osdc, req);
+
+	ceph_osdc_put_request(req);
+	if (rc == 0)
+		rc = len;
+	dout("writepages result %d\n", rc);
+	return rc;
+}
+
+/*
  * Write a single page, but leave the page locked.
  *
  * If we get a write error, mark the mapping for error, but still adjust the
@@ -628,7 +708,7 @@ static int writepage_nounlock(struct page *page, struct writeback_control *wbc)
 		set_bdi_congested(inode_to_bdi(inode), BLK_RW_ASYNC);
 
 	set_page_writeback(page);
-	err = ceph_osdc_writepages(&fsc->client->osdc, ceph_vino(inode),
+	err = ceph_sync_writepages(fsc, ceph_vino(inode),
 				   &ci->i_layout, snapc, page_off, len,
 				   ceph_wbc.truncate_seq,
 				   ceph_wbc.truncate_size,
@@ -1575,7 +1655,7 @@ static vm_fault_t ceph_page_mkwrite(struct vm_fault *vmf)
 	do {
 		lock_page(page);
 
-		if ((off > size) || (page->mapping != inode->i_mapping)) {
+		if (page_mkwrite_check_truncate(page, inode) < 0) {
 			unlock_page(page);
 			ret = VM_FAULT_NOPAGE;
 			break;
diff --git a/fs/ceph/cache.c b/fs/ceph/cache.c
index 270b769..2f5cb6b 100644
--- a/fs/ceph/cache.c
+++ b/fs/ceph/cache.c
@@ -32,7 +32,7 @@ struct ceph_fscache_entry {
 	size_t uniq_len;
 	/* The following members must be last */
 	struct ceph_fsid fsid;
-	char uniquifier[0];
+	char uniquifier[];
 };
 
 static const struct fscache_cookie_def ceph_fscache_fsid_object_def = {
diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c
index 28ae0c1..185db76 100644
--- a/fs/ceph/caps.c
+++ b/fs/ceph/caps.c
@@ -490,13 +490,10 @@ static void __cap_set_timeouts(struct ceph_mds_client *mdsc,
 			       struct ceph_inode_info *ci)
 {
 	struct ceph_mount_options *opt = mdsc->fsc->mount_options;
-
-	ci->i_hold_caps_min = round_jiffies(jiffies +
-					    opt->caps_wanted_delay_min * HZ);
 	ci->i_hold_caps_max = round_jiffies(jiffies +
 					    opt->caps_wanted_delay_max * HZ);
-	dout("__cap_set_timeouts %p min %lu max %lu\n", &ci->vfs_inode,
-	     ci->i_hold_caps_min - jiffies, ci->i_hold_caps_max - jiffies);
+	dout("__cap_set_timeouts %p %lu\n", &ci->vfs_inode,
+	     ci->i_hold_caps_max - jiffies);
 }
 
 /*
@@ -508,10 +505,9 @@ static void __cap_set_timeouts(struct ceph_mds_client *mdsc,
  *    -> we take mdsc->cap_delay_lock
  */
 static void __cap_delay_requeue(struct ceph_mds_client *mdsc,
-				struct ceph_inode_info *ci,
-				bool set_timeout)
+				struct ceph_inode_info *ci)
 {
-	dout("__cap_delay_requeue %p flags %d at %lu\n", &ci->vfs_inode,
+	dout("__cap_delay_requeue %p flags 0x%lx at %lu\n", &ci->vfs_inode,
 	     ci->i_ceph_flags, ci->i_hold_caps_max);
 	if (!mdsc->stopping) {
 		spin_lock(&mdsc->cap_delay_lock);
@@ -520,8 +516,7 @@ static void __cap_delay_requeue(struct ceph_mds_client *mdsc,
 				goto no_change;
 			list_del_init(&ci->i_cap_delay_list);
 		}
-		if (set_timeout)
-			__cap_set_timeouts(mdsc, ci);
+		__cap_set_timeouts(mdsc, ci);
 		list_add_tail(&ci->i_cap_delay_list, &mdsc->cap_delay_list);
 no_change:
 		spin_unlock(&mdsc->cap_delay_lock);
@@ -561,19 +556,20 @@ static void __cap_delay_cancel(struct ceph_mds_client *mdsc,
 	spin_unlock(&mdsc->cap_delay_lock);
 }
 
-/*
- * Common issue checks for add_cap, handle_cap_grant.
- */
+/* Common issue checks for add_cap, handle_cap_grant. */
 static void __check_cap_issue(struct ceph_inode_info *ci, struct ceph_cap *cap,
 			      unsigned issued)
 {
 	unsigned had = __ceph_caps_issued(ci, NULL);
 
+	lockdep_assert_held(&ci->i_ceph_lock);
+
 	/*
 	 * Each time we receive FILE_CACHE anew, we increment
 	 * i_rdcache_gen.
 	 */
-	if ((issued & (CEPH_CAP_FILE_CACHE|CEPH_CAP_FILE_LAZYIO)) &&
+	if (S_ISREG(ci->vfs_inode.i_mode) &&
+	    (issued & (CEPH_CAP_FILE_CACHE|CEPH_CAP_FILE_LAZYIO)) &&
 	    (had & (CEPH_CAP_FILE_CACHE|CEPH_CAP_FILE_LAZYIO)) == 0) {
 		ci->i_rdcache_gen++;
 	}
@@ -592,6 +588,13 @@ static void __check_cap_issue(struct ceph_inode_info *ci, struct ceph_cap *cap,
 			__ceph_dir_clear_complete(ci);
 		}
 	}
+
+	/* Wipe saved layout if we're losing DIR_CREATE caps */
+	if (S_ISDIR(ci->vfs_inode.i_mode) && (had & CEPH_CAP_DIR_CREATE) &&
+		!(issued & CEPH_CAP_DIR_CREATE)) {
+	     ceph_put_string(rcu_dereference_raw(ci->i_cached_layout.pool_ns));
+	     memset(&ci->i_cached_layout, 0, sizeof(ci->i_cached_layout));
+	}
 }
 
 /*
@@ -605,7 +608,7 @@ static void __check_cap_issue(struct ceph_inode_info *ci, struct ceph_cap *cap,
  */
 void ceph_add_cap(struct inode *inode,
 		  struct ceph_mds_session *session, u64 cap_id,
-		  int fmode, unsigned issued, unsigned wanted,
+		  unsigned issued, unsigned wanted,
 		  unsigned seq, unsigned mseq, u64 realmino, int flags,
 		  struct ceph_cap **new_cap)
 {
@@ -621,13 +624,6 @@ void ceph_add_cap(struct inode *inode,
 	dout("add_cap %p mds%d cap %llx %s seq %d\n", inode,
 	     session->s_mds, cap_id, ceph_cap_string(issued), seq);
 
-	/*
-	 * If we are opening the file, include file mode wanted bits
-	 * in wanted.
-	 */
-	if (fmode >= 0)
-		wanted |= ceph_caps_for_mode(fmode);
-
 	spin_lock(&session->s_gen_ttl_lock);
 	gen = session->s_cap_gen;
 	spin_unlock(&session->s_gen_ttl_lock);
@@ -725,7 +721,7 @@ void ceph_add_cap(struct inode *inode,
 		dout(" issued %s, mds wanted %s, actual %s, queueing\n",
 		     ceph_cap_string(issued), ceph_cap_string(wanted),
 		     ceph_cap_string(actual_wanted));
-		__cap_delay_requeue(mdsc, ci, true);
+		__cap_delay_requeue(mdsc, ci);
 	}
 
 	if (flags & CEPH_CAP_FLAG_AUTH) {
@@ -752,9 +748,6 @@ void ceph_add_cap(struct inode *inode,
 	cap->issue_seq = seq;
 	cap->mseq = mseq;
 	cap->cap_gen = gen;
-
-	if (fmode >= 0)
-		__ceph_get_fmode(ci, fmode);
 }
 
 /*
@@ -958,29 +951,97 @@ int __ceph_caps_used(struct ceph_inode_info *ci)
 	if (ci->i_rd_ref)
 		used |= CEPH_CAP_FILE_RD;
 	if (ci->i_rdcache_ref ||
-	    (!S_ISDIR(ci->vfs_inode.i_mode) && /* ignore readdir cache */
+	    (S_ISREG(ci->vfs_inode.i_mode) &&
 	     ci->vfs_inode.i_data.nrpages))
 		used |= CEPH_CAP_FILE_CACHE;
 	if (ci->i_wr_ref)
 		used |= CEPH_CAP_FILE_WR;
 	if (ci->i_wb_ref || ci->i_wrbuffer_ref)
 		used |= CEPH_CAP_FILE_BUFFER;
+	if (ci->i_fx_ref)
+		used |= CEPH_CAP_FILE_EXCL;
 	return used;
 }
 
+#define FMODE_WAIT_BIAS 1000
+
 /*
  * wanted, by virtue of open file modes
  */
 int __ceph_caps_file_wanted(struct ceph_inode_info *ci)
 {
-	int i, bits = 0;
-	for (i = 0; i < CEPH_FILE_MODE_BITS; i++) {
-		if (ci->i_nr_by_mode[i])
-			bits |= 1 << i;
+	const int PIN_SHIFT = ffs(CEPH_FILE_MODE_PIN);
+	const int RD_SHIFT = ffs(CEPH_FILE_MODE_RD);
+	const int WR_SHIFT = ffs(CEPH_FILE_MODE_WR);
+	const int LAZY_SHIFT = ffs(CEPH_FILE_MODE_LAZY);
+	struct ceph_mount_options *opt =
+		ceph_inode_to_client(&ci->vfs_inode)->mount_options;
+	unsigned long used_cutoff = jiffies - opt->caps_wanted_delay_max * HZ;
+	unsigned long idle_cutoff = jiffies - opt->caps_wanted_delay_min * HZ;
+
+	if (S_ISDIR(ci->vfs_inode.i_mode)) {
+		int want = 0;
+
+		/* use used_cutoff here, to keep dir's wanted caps longer */
+		if (ci->i_nr_by_mode[RD_SHIFT] > 0 ||
+		    time_after(ci->i_last_rd, used_cutoff))
+			want |= CEPH_CAP_ANY_SHARED;
+
+		if (ci->i_nr_by_mode[WR_SHIFT] > 0 ||
+		    time_after(ci->i_last_wr, used_cutoff)) {
+			want |= CEPH_CAP_ANY_SHARED | CEPH_CAP_FILE_EXCL;
+			if (opt->flags & CEPH_MOUNT_OPT_ASYNC_DIROPS)
+				want |= CEPH_CAP_ANY_DIR_OPS;
+		}
+
+		if (want || ci->i_nr_by_mode[PIN_SHIFT] > 0)
+			want |= CEPH_CAP_PIN;
+
+		return want;
+	} else {
+		int bits = 0;
+
+		if (ci->i_nr_by_mode[RD_SHIFT] > 0) {
+			if (ci->i_nr_by_mode[RD_SHIFT] >= FMODE_WAIT_BIAS ||
+			    time_after(ci->i_last_rd, used_cutoff))
+				bits |= 1 << RD_SHIFT;
+		} else if (time_after(ci->i_last_rd, idle_cutoff)) {
+			bits |= 1 << RD_SHIFT;
+		}
+
+		if (ci->i_nr_by_mode[WR_SHIFT] > 0) {
+			if (ci->i_nr_by_mode[WR_SHIFT] >= FMODE_WAIT_BIAS ||
+			    time_after(ci->i_last_wr, used_cutoff))
+				bits |= 1 << WR_SHIFT;
+		} else if (time_after(ci->i_last_wr, idle_cutoff)) {
+			bits |= 1 << WR_SHIFT;
+		}
+
+		/* check lazyio only when read/write is wanted */
+		if ((bits & (CEPH_FILE_MODE_RDWR << 1)) &&
+		    ci->i_nr_by_mode[LAZY_SHIFT] > 0)
+			bits |= 1 << LAZY_SHIFT;
+
+		return bits ? ceph_caps_for_mode(bits >> 1) : 0;
 	}
-	if (bits == 0)
-		return 0;
-	return ceph_caps_for_mode(bits >> 1);
+}
+
+/*
+ * wanted, by virtue of open file modes AND cap refs (buffered/cached data)
+ */
+int __ceph_caps_wanted(struct ceph_inode_info *ci)
+{
+	int w = __ceph_caps_file_wanted(ci) | __ceph_caps_used(ci);
+	if (S_ISDIR(ci->vfs_inode.i_mode)) {
+		/* we want EXCL if holding caps of dir ops */
+		if (w & CEPH_CAP_ANY_DIR_OPS)
+			w |= CEPH_CAP_FILE_EXCL;
+	} else {
+		/* we want EXCL if dirty data */
+		if (w & CEPH_CAP_FILE_BUFFER)
+			w |= CEPH_CAP_FILE_EXCL;
+	}
+	return w;
 }
 
 /*
@@ -1004,14 +1065,6 @@ int __ceph_caps_mds_wanted(struct ceph_inode_info *ci, bool check)
 	return mds_wanted;
 }
 
-/*
- * called under i_ceph_lock
- */
-static int __ceph_is_single_caps(struct ceph_inode_info *ci)
-{
-	return rb_first(&ci->i_caps) == rb_last(&ci->i_caps);
-}
-
 int ceph_is_any_caps(struct inode *inode)
 {
 	struct ceph_inode_info *ci = ceph_inode(inode);
@@ -1274,9 +1327,15 @@ static int __send_cap(struct ceph_mds_client *mdsc, struct ceph_cap *cap,
 	struct cap_msg_args arg;
 	int held, revoking;
 	int wake = 0;
-	int delayed = 0;
 	int ret;
 
+	/* Don't send anything if it's still being created. Return delayed */
+	if (ci->i_ceph_flags & CEPH_I_ASYNC_CREATE) {
+		spin_unlock(&ci->i_ceph_lock);
+		dout("%s async create in flight for %p\n", __func__, inode);
+		return 1;
+	}
+
 	held = cap->issued | cap->implemented;
 	revoking = cap->implemented & ~cap->issued;
 	retain &= ~revoking;
@@ -1287,28 +1346,7 @@ static int __send_cap(struct ceph_mds_client *mdsc, struct ceph_cap *cap,
 	     ceph_cap_string(revoking));
 	BUG_ON((retain & CEPH_CAP_PIN) == 0);
 
-	arg.session = cap->session;
-
-	/* don't release wanted unless we've waited a bit. */
-	if ((ci->i_ceph_flags & CEPH_I_NODELAY) == 0 &&
-	    time_before(jiffies, ci->i_hold_caps_min)) {
-		dout(" delaying issued %s -> %s, wanted %s -> %s on send\n",
-		     ceph_cap_string(cap->issued),
-		     ceph_cap_string(cap->issued & retain),
-		     ceph_cap_string(cap->mds_wanted),
-		     ceph_cap_string(want));
-		want |= cap->mds_wanted;
-		retain |= cap->issued;
-		delayed = 1;
-	}
-	ci->i_ceph_flags &= ~(CEPH_I_NODELAY | CEPH_I_FLUSH);
-	if (want & ~cap->mds_wanted) {
-		/* user space may open/close single file frequently.
-		 * This avoids droping mds_wanted immediately after
-		 * requesting new mds_wanted.
-		 */
-		__cap_set_timeouts(mdsc, ci);
-	}
+	ci->i_ceph_flags &= ~CEPH_I_FLUSH;
 
 	cap->issued &= retain;  /* drop bits we don't want */
 	if (cap->implemented & ~cap->issued) {
@@ -1323,6 +1361,7 @@ static int __send_cap(struct ceph_mds_client *mdsc, struct ceph_cap *cap,
 	cap->implemented &= cap->issued | used;
 	cap->mds_wanted = want;
 
+	arg.session = cap->session;
 	arg.ino = ceph_vino(inode).ino;
 	arg.cid = cap->cap_id;
 	arg.follows = flushing ? ci->i_head_snapc->seq : 0;
@@ -1332,7 +1371,8 @@ static int __send_cap(struct ceph_mds_client *mdsc, struct ceph_cap *cap,
 	arg.size = inode->i_size;
 	ci->i_reported_size = arg.size;
 	arg.max_size = ci->i_wanted_max_size;
-	ci->i_requested_max_size = arg.max_size;
+	if (cap == ci->i_auth_cap)
+		ci->i_requested_max_size = arg.max_size;
 
 	if (flushing & CEPH_CAP_XATTR_EXCL) {
 		old_blob = __ceph_build_xattrs_blob(ci);
@@ -1383,14 +1423,19 @@ static int __send_cap(struct ceph_mds_client *mdsc, struct ceph_cap *cap,
 
 	ret = send_cap_msg(&arg);
 	if (ret < 0) {
-		dout("error sending cap msg, must requeue %p\n", inode);
-		delayed = 1;
+		pr_err("error sending cap msg, ino (%llx.%llx) "
+		       "flushing %s tid %llu, requeue\n",
+		       ceph_vinop(inode), ceph_cap_string(flushing),
+		       flush_tid);
+		spin_lock(&ci->i_ceph_lock);
+		__cap_delay_requeue(mdsc, ci);
+		spin_unlock(&ci->i_ceph_lock);
 	}
 
 	if (wake)
 		wake_up_all(&ci->i_cap_wq);
 
-	return delayed;
+	return ret;
 }
 
 static inline int __send_flush_snap(struct inode *inode,
@@ -1617,6 +1662,8 @@ int __ceph_mark_dirty_caps(struct ceph_inode_info *ci, int mask,
 	int was = ci->i_dirty_caps;
 	int dirty = 0;
 
+	lockdep_assert_held(&ci->i_ceph_lock);
+
 	if (!ci->i_auth_cap) {
 		pr_warn("__mark_dirty_caps %p %llx mask %s, "
 			"but no auth cap (session was closed?)\n",
@@ -1654,7 +1701,7 @@ int __ceph_mark_dirty_caps(struct ceph_inode_info *ci, int mask,
 	if (((was | ci->i_flushing_caps) & CEPH_CAP_FILE_BUFFER) &&
 	    (mask & CEPH_CAP_FILE_BUFFER))
 		dirty |= I_DIRTY_DATASYNC;
-	__cap_delay_requeue(mdsc, ci, true);
+	__cap_delay_requeue(mdsc, ci);
 	return dirty;
 }
 
@@ -1726,6 +1773,7 @@ static u64 __mark_caps_flushing(struct inode *inode,
 	struct ceph_cap_flush *cf = NULL;
 	int flushing;
 
+	lockdep_assert_held(&ci->i_ceph_lock);
 	BUG_ON(ci->i_dirty_caps == 0);
 	BUG_ON(list_empty(&ci->i_dirty_item));
 	BUG_ON(!ci->i_prealloc_cap_flush);
@@ -1805,8 +1853,6 @@ bool __ceph_should_report_size(struct ceph_inode_info *ci)
  * versus held caps.  Release, flush, ack revoked caps to mds as
  * appropriate.
  *
- *  CHECK_CAPS_NODELAY - caller is delayed work and we should not delay
- *    cap release further.
  *  CHECK_CAPS_AUTHONLY - we should only check the auth cap
  *  CHECK_CAPS_FLUSH - we should flush any dirty caps immediately, without
  *    further delay.
@@ -1825,24 +1871,13 @@ void ceph_check_caps(struct ceph_inode_info *ci, int flags,
 	int mds = -1;   /* keep track of how far we've gone through i_caps list
 			   to avoid an infinite loop on retry */
 	struct rb_node *p;
-	int delayed = 0, sent = 0;
-	bool no_delay = flags & CHECK_CAPS_NODELAY;
 	bool queue_invalidate = false;
 	bool tried_invalidate = false;
 
-	/* if we are unmounting, flush any unused caps immediately. */
-	if (mdsc->stopping)
-		no_delay = true;
-
 	spin_lock(&ci->i_ceph_lock);
-
 	if (ci->i_ceph_flags & CEPH_I_FLUSH)
 		flags |= CHECK_CAPS_FLUSH;
 
-	if (!(flags & CHECK_CAPS_AUTHONLY) ||
-	    (ci->i_auth_cap && __ceph_is_single_caps(ci)))
-		__cap_delay_cancel(mdsc, ci);
-
 	goto retry_locked;
 retry:
 	spin_lock(&ci->i_ceph_lock);
@@ -1866,10 +1901,11 @@ void ceph_check_caps(struct ceph_inode_info *ci, int flags,
 			 * revoking the shared cap on every create/unlink
 			 * operation.
 			 */
-			if (IS_RDONLY(inode))
+			if (IS_RDONLY(inode)) {
 				want = CEPH_CAP_ANY_SHARED;
-			else
-				want = CEPH_CAP_ANY_SHARED | CEPH_CAP_FILE_EXCL;
+			} else {
+				want |= CEPH_CAP_ANY_SHARED | CEPH_CAP_FILE_EXCL;
+			}
 			retain |= want;
 		} else {
 
@@ -1885,14 +1921,13 @@ void ceph_check_caps(struct ceph_inode_info *ci, int flags,
 	}
 
 	dout("check_caps %p file_want %s used %s dirty %s flushing %s"
-	     " issued %s revoking %s retain %s %s%s%s\n", inode,
+	     " issued %s revoking %s retain %s %s%s\n", inode,
 	     ceph_cap_string(file_wanted),
 	     ceph_cap_string(used), ceph_cap_string(ci->i_dirty_caps),
 	     ceph_cap_string(ci->i_flushing_caps),
 	     ceph_cap_string(issued), ceph_cap_string(revoking),
 	     ceph_cap_string(retain),
 	     (flags & CHECK_CAPS_AUTHONLY) ? " AUTHONLY" : "",
-	     (flags & CHECK_CAPS_NODELAY) ? " NODELAY" : "",
 	     (flags & CHECK_CAPS_FLUSH) ? " FLUSH" : "");
 
 	/*
@@ -1900,8 +1935,8 @@ void ceph_check_caps(struct ceph_inode_info *ci, int flags,
 	 * have cached pages, but don't want them, then try to invalidate.
 	 * If we fail, it's because pages are locked.... try again later.
 	 */
-	if ((!no_delay || mdsc->stopping) &&
-	    !S_ISDIR(inode->i_mode) &&		/* ignore readdir cache */
+	if ((!(flags & CHECK_CAPS_NOINVAL) || mdsc->stopping) &&
+	    S_ISREG(inode->i_mode) &&
 	    !(ci->i_wb_ref || ci->i_wrbuffer_ref) &&   /* no dirty pages... */
 	    inode->i_data.nrpages &&		/* have cached pages */
 	    (revoking & (CEPH_CAP_FILE_CACHE|
@@ -1973,28 +2008,17 @@ void ceph_check_caps(struct ceph_inode_info *ci, int flags,
 		}
 
 		/* want more caps from mds? */
-		if (want & ~(cap->mds_wanted | cap->issued))
-			goto ack;
+		if (want & ~cap->mds_wanted) {
+			if (want & ~(cap->mds_wanted | cap->issued))
+				goto ack;
+			if (!__cap_is_valid(cap))
+				goto ack;
+		}
 
 		/* things we might delay */
 		if ((cap->issued & ~retain) == 0)
 			continue;     /* nope, all good */
 
-		if (no_delay)
-			goto ack;
-
-		/* delay? */
-		if ((ci->i_ceph_flags & CEPH_I_NODELAY) == 0 &&
-		    time_before(jiffies, ci->i_hold_caps_max)) {
-			dout(" delaying issued %s -> %s, wanted %s -> %s\n",
-			     ceph_cap_string(cap->issued),
-			     ceph_cap_string(cap->issued & retain),
-			     ceph_cap_string(cap->mds_wanted),
-			     ceph_cap_string(want));
-			delayed++;
-			continue;
-		}
-
 ack:
 		if (session && session != cap->session) {
 			dout("oops, wrong session %p mutex\n", session);
@@ -2055,18 +2079,20 @@ void ceph_check_caps(struct ceph_inode_info *ci, int flags,
 		}
 
 		mds = cap->mds;  /* remember mds, so we don't repeat */
-		sent++;
 
 		/* __send_cap drops i_ceph_lock */
-		delayed += __send_cap(mdsc, cap, CEPH_CAP_OP_UPDATE, 0,
-				cap_used, want, retain, flushing,
-				flush_tid, oldest_flush_tid);
+		__send_cap(mdsc, cap, CEPH_CAP_OP_UPDATE, 0, cap_used, want,
+			   retain, flushing, flush_tid, oldest_flush_tid);
 		goto retry; /* retake i_ceph_lock and restart our cap scan. */
 	}
 
-	/* Reschedule delayed caps release if we delayed anything */
-	if (delayed)
-		__cap_delay_requeue(mdsc, ci, false);
+	/* periodically re-calculate caps wanted by open files */
+	if (__ceph_is_any_real_caps(ci) &&
+	    list_empty(&ci->i_cap_delay_list) &&
+	    (file_wanted & ~CEPH_CAP_PIN) &&
+	    !(used & (CEPH_CAP_FILE_RD | CEPH_CAP_ANY_FILE_WR))) {
+		__cap_delay_requeue(mdsc, ci);
+	}
 
 	spin_unlock(&ci->i_ceph_lock);
 
@@ -2095,7 +2121,6 @@ static int try_flush_caps(struct inode *inode, u64 *ptid)
 retry_locked:
 	if (ci->i_dirty_caps && ci->i_auth_cap) {
 		struct ceph_cap *cap = ci->i_auth_cap;
-		int delayed;
 
 		if (session != cap->session) {
 			spin_unlock(&ci->i_ceph_lock);
@@ -2124,18 +2149,10 @@ static int try_flush_caps(struct inode *inode, u64 *ptid)
 						 &oldest_flush_tid);
 
 		/* __send_cap drops i_ceph_lock */
-		delayed = __send_cap(mdsc, cap, CEPH_CAP_OP_FLUSH,
-				     CEPH_CLIENT_CAPS_SYNC,
-				     __ceph_caps_used(ci),
-				     __ceph_caps_wanted(ci),
-				     (cap->issued | cap->implemented),
-				     flushing, flush_tid, oldest_flush_tid);
-
-		if (delayed) {
-			spin_lock(&ci->i_ceph_lock);
-			__cap_delay_requeue(mdsc, ci, true);
-			spin_unlock(&ci->i_ceph_lock);
-		}
+		__send_cap(mdsc, cap, CEPH_CAP_OP_FLUSH, CEPH_CLIENT_CAPS_SYNC,
+			   __ceph_caps_used(ci), __ceph_caps_wanted(ci),
+			   (cap->issued | cap->implemented),
+			   flushing, flush_tid, oldest_flush_tid);
 	} else {
 		if (!list_empty(&ci->i_cap_flush_list)) {
 			struct ceph_cap_flush *cf =
@@ -2233,6 +2250,10 @@ int ceph_fsync(struct file *file, loff_t start, loff_t end, int datasync)
 	if (datasync)
 		goto out;
 
+	ret = ceph_wait_on_async_create(inode);
+	if (ret)
+		goto out;
+
 	dirty = try_flush_caps(inode, &flush_tid);
 	dout("fsync dirty caps are %s\n", ceph_cap_string(dirty));
 
@@ -2335,22 +2356,13 @@ static void __kick_flushing_caps(struct ceph_mds_client *mdsc,
 		if (cf->caps) {
 			dout("kick_flushing_caps %p cap %p tid %llu %s\n",
 			     inode, cap, cf->tid, ceph_cap_string(cf->caps));
-			ci->i_ceph_flags |= CEPH_I_NODELAY;
-
-			ret = __send_cap(mdsc, cap, CEPH_CAP_OP_FLUSH,
+			__send_cap(mdsc, cap, CEPH_CAP_OP_FLUSH,
 					 (cf->tid < last_snap_flush ?
 					  CEPH_CLIENT_CAPS_PENDING_CAPSNAP : 0),
 					  __ceph_caps_used(ci),
 					  __ceph_caps_wanted(ci),
 					  (cap->issued | cap->implemented),
 					  cf->caps, cf->tid, oldest_flush_tid);
-			if (ret) {
-				pr_err("kick_flushing_caps: error sending "
-					"cap flush, ino (%llx.%llx) "
-					"tid %llu flushing %s\n",
-					ceph_vinop(inode), cf->tid,
-					ceph_cap_string(cf->caps));
-			}
 		} else {
 			struct ceph_cap_snap *capsnap =
 					container_of(cf, struct ceph_cap_snap,
@@ -2457,16 +2469,15 @@ void ceph_kick_flushing_caps(struct ceph_mds_client *mdsc,
 	}
 }
 
-static void kick_flushing_inode_caps(struct ceph_mds_client *mdsc,
-				     struct ceph_mds_session *session,
-				     struct inode *inode)
-	__releases(ci->i_ceph_lock)
+void ceph_kick_flushing_inode_caps(struct ceph_mds_session *session,
+				   struct ceph_inode_info *ci)
 {
-	struct ceph_inode_info *ci = ceph_inode(inode);
-	struct ceph_cap *cap;
+	struct ceph_mds_client *mdsc = session->s_mdsc;
+	struct ceph_cap *cap = ci->i_auth_cap;
 
-	cap = ci->i_auth_cap;
-	dout("kick_flushing_inode_caps %p flushing %s\n", inode,
+	lockdep_assert_held(&ci->i_ceph_lock);
+
+	dout("%s %p flushing %s\n", __func__, &ci->vfs_inode,
 	     ceph_cap_string(ci->i_flushing_caps));
 
 	if (!list_empty(&ci->i_cap_flush_list)) {
@@ -2478,9 +2489,6 @@ static void kick_flushing_inode_caps(struct ceph_mds_client *mdsc,
 		spin_unlock(&mdsc->cap_dirty_lock);
 
 		__kick_flushing_caps(mdsc, session, ci, oldest_flush_tid);
-		spin_unlock(&ci->i_ceph_lock);
-	} else {
-		spin_unlock(&ci->i_ceph_lock);
 	}
 }
 
@@ -2488,18 +2496,20 @@ static void kick_flushing_inode_caps(struct ceph_mds_client *mdsc,
 /*
  * Take references to capabilities we hold, so that we don't release
  * them to the MDS prematurely.
- *
- * Protected by i_ceph_lock.
  */
-static void __take_cap_refs(struct ceph_inode_info *ci, int got,
+void ceph_take_cap_refs(struct ceph_inode_info *ci, int got,
 			    bool snap_rwsem_locked)
 {
+	lockdep_assert_held(&ci->i_ceph_lock);
+
 	if (got & CEPH_CAP_PIN)
 		ci->i_pin_ref++;
 	if (got & CEPH_CAP_FILE_RD)
 		ci->i_rd_ref++;
 	if (got & CEPH_CAP_FILE_CACHE)
 		ci->i_rdcache_ref++;
+	if (got & CEPH_CAP_FILE_EXCL)
+		ci->i_fx_ref++;
 	if (got & CEPH_CAP_FILE_WR) {
 		if (ci->i_wr_ref == 0 && !ci->i_head_snapc) {
 			BUG_ON(!snap_rwsem_locked);
@@ -2512,7 +2522,7 @@ static void __take_cap_refs(struct ceph_inode_info *ci, int got,
 		if (ci->i_wb_ref == 0)
 			ihold(&ci->vfs_inode);
 		ci->i_wb_ref++;
-		dout("__take_cap_refs %p wb %d -> %d (?)\n",
+		dout("%s %p wb %d -> %d (?)\n", __func__,
 		     &ci->vfs_inode, ci->i_wb_ref-1, ci->i_wb_ref);
 	}
 }
@@ -2524,14 +2534,16 @@ static void __take_cap_refs(struct ceph_inode_info *ci, int got,
  * Note that caller is responsible for ensuring max_size increases are
  * requested from the MDS.
  *
- * Returns 0 if caps were not able to be acquired (yet), a 1 if they were,
- * or a negative error code.
- *
- * FIXME: how does a 0 return differ from -EAGAIN?
+ * Returns 0 if caps were not able to be acquired (yet), 1 if succeed,
+ * or a negative error code. There are 3 speical error codes:
+ *  -EAGAIN: need to sleep but non-blocking is specified
+ *  -EFBIG:  ask caller to call check_max_size() and try again.
+ *  -ESTALE: ask caller to call ceph_renew_caps() and try again.
  */
 enum {
-	NON_BLOCKING	= 1,
-	CHECK_FILELOCK	= 2,
+	/* first 8 bits are reserved for CEPH_FILE_MODE_FOO */
+	NON_BLOCKING	= (1 << 8),
+	CHECK_FILELOCK	= (1 << 9),
 };
 
 static int try_get_cap_refs(struct inode *inode, int need, int want,
@@ -2541,7 +2553,6 @@ static int try_get_cap_refs(struct inode *inode, int need, int want,
 	struct ceph_mds_client *mdsc = ceph_inode_to_client(inode)->mdsc;
 	int ret = 0;
 	int have, implemented;
-	int file_wanted;
 	bool snap_rwsem_locked = false;
 
 	dout("get_cap_refs %p need %s want %s\n", inode,
@@ -2557,15 +2568,6 @@ static int try_get_cap_refs(struct inode *inode, int need, int want,
 		goto out_unlock;
 	}
 
-	/* make sure file is actually open */
-	file_wanted = __ceph_caps_file_wanted(ci);
-	if ((file_wanted & need) != need) {
-		dout("try_get_cap_refs need %s file_wanted %s, EBADF\n",
-		     ceph_cap_string(need), ceph_cap_string(file_wanted));
-		ret = -EBADF;
-		goto out_unlock;
-	}
-
 	/* finish pending truncate */
 	while (ci->i_truncate_pending) {
 		spin_unlock(&ci->i_ceph_lock);
@@ -2584,7 +2586,7 @@ static int try_get_cap_refs(struct inode *inode, int need, int want,
 			dout("get_cap_refs %p endoff %llu > maxsize %llu\n",
 			     inode, endoff, ci->i_max_size);
 			if (endoff > ci->i_requested_max_size)
-				ret = -EAGAIN;
+				ret = ci->i_auth_cap ? -EFBIG : -ESTALE;
 			goto out_unlock;
 		}
 		/*
@@ -2630,51 +2632,55 @@ static int try_get_cap_refs(struct inode *inode, int need, int want,
 				}
 				snap_rwsem_locked = true;
 			}
-			*got = need | (have & want);
-			if ((need & CEPH_CAP_FILE_RD) &&
+			if ((have & want) == want)
+				*got = need | want;
+			else
+				*got = need;
+			if (S_ISREG(inode->i_mode) &&
+			    (need & CEPH_CAP_FILE_RD) &&
 			    !(*got & CEPH_CAP_FILE_CACHE))
 				ceph_disable_fscache_readpage(ci);
-			__take_cap_refs(ci, *got, true);
+			ceph_take_cap_refs(ci, *got, true);
 			ret = 1;
 		}
 	} else {
 		int session_readonly = false;
-		if ((need & CEPH_CAP_FILE_WR) && ci->i_auth_cap) {
+		int mds_wanted;
+		if (ci->i_auth_cap &&
+		    (need & (CEPH_CAP_FILE_WR | CEPH_CAP_FILE_EXCL))) {
 			struct ceph_mds_session *s = ci->i_auth_cap->session;
 			spin_lock(&s->s_cap_lock);
 			session_readonly = s->s_readonly;
 			spin_unlock(&s->s_cap_lock);
 		}
 		if (session_readonly) {
-			dout("get_cap_refs %p needed %s but mds%d readonly\n",
+			dout("get_cap_refs %p need %s but mds%d readonly\n",
 			     inode, ceph_cap_string(need), ci->i_auth_cap->mds);
 			ret = -EROFS;
 			goto out_unlock;
 		}
 
-		if (ci->i_ceph_flags & CEPH_I_CAP_DROPPED) {
-			int mds_wanted;
-			if (READ_ONCE(mdsc->fsc->mount_state) ==
-			    CEPH_MOUNT_SHUTDOWN) {
-				dout("get_cap_refs %p forced umount\n", inode);
-				ret = -EIO;
-				goto out_unlock;
-			}
-			mds_wanted = __ceph_caps_mds_wanted(ci, false);
-			if (need & ~(mds_wanted & need)) {
-				dout("get_cap_refs %p caps were dropped"
-				     " (session killed?)\n", inode);
-				ret = -ESTALE;
-				goto out_unlock;
-			}
-			if (!(file_wanted & ~mds_wanted))
-				ci->i_ceph_flags &= ~CEPH_I_CAP_DROPPED;
+		if (READ_ONCE(mdsc->fsc->mount_state) == CEPH_MOUNT_SHUTDOWN) {
+			dout("get_cap_refs %p forced umount\n", inode);
+			ret = -EIO;
+			goto out_unlock;
+		}
+		mds_wanted = __ceph_caps_mds_wanted(ci, false);
+		if (need & ~mds_wanted) {
+			dout("get_cap_refs %p need %s > mds_wanted %s\n",
+			     inode, ceph_cap_string(need),
+			     ceph_cap_string(mds_wanted));
+			ret = -ESTALE;
+			goto out_unlock;
 		}
 
-		dout("get_cap_refs %p have %s needed %s\n", inode,
+		dout("get_cap_refs %p have %s need %s\n", inode,
 		     ceph_cap_string(have), ceph_cap_string(need));
 	}
 out_unlock:
+
+	__ceph_touch_fmode(ci, mdsc, flags);
+
 	spin_unlock(&ci->i_ceph_lock);
 	if (snap_rwsem_locked)
 		up_read(&mdsc->snap_rwsem);
@@ -2712,20 +2718,40 @@ static void check_max_size(struct inode *inode, loff_t endoff)
 		ceph_check_caps(ci, CHECK_CAPS_AUTHONLY, NULL);
 }
 
+static inline int get_used_fmode(int caps)
+{
+	int fmode = 0;
+	if (caps & CEPH_CAP_FILE_RD)
+		fmode |= CEPH_FILE_MODE_RD;
+	if (caps & CEPH_CAP_FILE_WR)
+		fmode |= CEPH_FILE_MODE_WR;
+	return fmode;
+}
+
 int ceph_try_get_caps(struct inode *inode, int need, int want,
 		      bool nonblock, int *got)
 {
-	int ret;
+	int ret, flags;
 
 	BUG_ON(need & ~CEPH_CAP_FILE_RD);
-	BUG_ON(want & ~(CEPH_CAP_FILE_CACHE|CEPH_CAP_FILE_LAZYIO|CEPH_CAP_FILE_SHARED));
-	ret = ceph_pool_perm_check(inode, need);
-	if (ret < 0)
-		return ret;
+	BUG_ON(want & ~(CEPH_CAP_FILE_CACHE | CEPH_CAP_FILE_LAZYIO |
+			CEPH_CAP_FILE_SHARED | CEPH_CAP_FILE_EXCL |
+			CEPH_CAP_ANY_DIR_OPS));
+	if (need) {
+		ret = ceph_pool_perm_check(inode, need);
+		if (ret < 0)
+			return ret;
+	}
 
-	ret = try_get_cap_refs(inode, need, want, 0,
-			       (nonblock ? NON_BLOCKING : 0), got);
-	return ret == -EAGAIN ? 0 : ret;
+	flags = get_used_fmode(need | want);
+	if (nonblock)
+		flags |= NON_BLOCKING;
+
+	ret = try_get_cap_refs(inode, need, want, 0, flags, got);
+	/* three special error codes */
+	if (ret == -EAGAIN || ret == -EFBIG || ret == -EAGAIN)
+		ret = 0;
+	return ret;
 }
 
 /*
@@ -2750,16 +2776,16 @@ int ceph_get_caps(struct file *filp, int need, int want,
 	    fi->filp_gen != READ_ONCE(fsc->filp_gen))
 		return -EBADF;
 
-	while (true) {
-		if (endoff > 0)
-			check_max_size(inode, endoff);
+	flags = get_used_fmode(need | want);
 
-		flags = atomic_read(&fi->num_locks) ? CHECK_FILELOCK : 0;
+	while (true) {
+		flags &= CEPH_FILE_MODE_MASK;
+		if (atomic_read(&fi->num_locks))
+			flags |= CHECK_FILELOCK;
 		_got = 0;
 		ret = try_get_cap_refs(inode, need, want, endoff,
 				       flags, &_got);
-		if (ret == -EAGAIN)
-			continue;
+		WARN_ON_ONCE(ret == -EAGAIN);
 		if (!ret) {
 			struct ceph_mds_client *mdsc = fsc->mdsc;
 			struct cap_wait cw;
@@ -2774,6 +2800,8 @@ int ceph_get_caps(struct file *filp, int need, int want,
 			list_add(&cw.list, &mdsc->cap_wait_list);
 			spin_unlock(&mdsc->caps_list_lock);
 
+			/* make sure used fmode not timeout */
+			ceph_get_fmode(ci, flags, FMODE_WAIT_BIAS);
 			add_wait_queue(&ci->i_cap_wq, &wait);
 
 			flags |= NON_BLOCKING;
@@ -2787,6 +2815,7 @@ int ceph_get_caps(struct file *filp, int need, int want,
 			}
 
 			remove_wait_queue(&ci->i_cap_wq, &wait);
+			ceph_put_fmode(ci, flags, FMODE_WAIT_BIAS);
 
 			spin_lock(&mdsc->caps_list_lock);
 			list_del(&cw.list);
@@ -2804,16 +2833,26 @@ int ceph_get_caps(struct file *filp, int need, int want,
 		}
 
 		if (ret < 0) {
+			if (ret == -EFBIG || ret == -ESTALE) {
+				int ret2 = ceph_wait_on_async_create(inode);
+				if (ret2 < 0)
+					return ret2;
+			}
+			if (ret == -EFBIG) {
+				check_max_size(inode, endoff);
+				continue;
+			}
 			if (ret == -ESTALE) {
 				/* session was killed, try renew caps */
-				ret = ceph_renew_caps(inode);
+				ret = ceph_renew_caps(inode, flags);
 				if (ret == 0)
 					continue;
 			}
 			return ret;
 		}
 
-		if (ci->i_inline_version != CEPH_INLINE_NONE &&
+		if (S_ISREG(ci->vfs_inode.i_mode) &&
+		    ci->i_inline_version != CEPH_INLINE_NONE &&
 		    (_got & (CEPH_CAP_FILE_CACHE|CEPH_CAP_FILE_LAZYIO)) &&
 		    i_size_read(inode) > 0) {
 			struct page *page =
@@ -2846,7 +2885,8 @@ int ceph_get_caps(struct file *filp, int need, int want,
 		break;
 	}
 
-	if ((_got & CEPH_CAP_FILE_RD) && (_got & CEPH_CAP_FILE_CACHE))
+	if (S_ISREG(ci->vfs_inode.i_mode) &&
+	    (_got & CEPH_CAP_FILE_RD) && (_got & CEPH_CAP_FILE_CACHE))
 		ceph_fscache_revalidate_cookie(ci);
 
 	*got = _got;
@@ -2860,7 +2900,7 @@ int ceph_get_caps(struct file *filp, int need, int want,
 void ceph_get_cap_refs(struct ceph_inode_info *ci, int caps)
 {
 	spin_lock(&ci->i_ceph_lock);
-	__take_cap_refs(ci, caps, false);
+	ceph_take_cap_refs(ci, caps, false);
 	spin_unlock(&ci->i_ceph_lock);
 }
 
@@ -2911,6 +2951,9 @@ void ceph_put_cap_refs(struct ceph_inode_info *ci, int had)
 	if (had & CEPH_CAP_FILE_CACHE)
 		if (--ci->i_rdcache_ref == 0)
 			last++;
+	if (had & CEPH_CAP_FILE_EXCL)
+		if (--ci->i_fx_ref == 0)
+			last++;
 	if (had & CEPH_CAP_FILE_BUFFER) {
 		if (--ci->i_wb_ref == 0) {
 			last++;
@@ -2950,7 +2993,7 @@ void ceph_put_cap_refs(struct ceph_inode_info *ci, int had)
 	dout("put_cap_refs %p had %s%s%s\n", inode, ceph_cap_string(had),
 	     last ? " last" : "", put ? " put" : "");
 
-	if (last && !flushsnaps)
+	if (last)
 		ceph_check_caps(ci, 0, NULL);
 	else if (flushsnaps)
 		ceph_flush_snaps(ci, NULL);
@@ -3032,7 +3075,7 @@ void ceph_put_wrbuffer_cap_refs(struct ceph_inode_info *ci, int nr,
 	spin_unlock(&ci->i_ceph_lock);
 
 	if (last) {
-		ceph_check_caps(ci, CHECK_CAPS_AUTHONLY, NULL);
+		ceph_check_caps(ci, 0, NULL);
 	} else if (flush_snaps) {
 		ceph_flush_snaps(ci, NULL);
 	}
@@ -3133,7 +3176,7 @@ static void handle_cap_grant(struct inode *inode,
 	 * try to invalidate (once).  (If there are dirty buffers, we
 	 * will invalidate _after_ writeback.)
 	 */
-	if (!S_ISDIR(inode->i_mode) && /* don't invalidate readdir cache */
+	if (S_ISREG(inode->i_mode) && /* don't invalidate readdir cache */
 	    ((cap->issued & ~newcaps) & CEPH_CAP_FILE_CACHE) &&
 	    (newcaps & CEPH_CAP_FILE_LAZYIO) == 0 &&
 	    !(ci->i_wrbuffer_ref || ci->i_wb_ref)) {
@@ -3297,11 +3340,12 @@ static void handle_cap_grant(struct inode *inode,
 		     ceph_cap_string(cap->issued),
 		     ceph_cap_string(newcaps),
 		     ceph_cap_string(revoking));
-		if (revoking & used & CEPH_CAP_FILE_BUFFER)
+		if (S_ISREG(inode->i_mode) &&
+		    (revoking & used & CEPH_CAP_FILE_BUFFER))
 			writeback = true;  /* initiate writeback; will delay ack */
-		else if (revoking == CEPH_CAP_FILE_CACHE &&
-			 (newcaps & CEPH_CAP_FILE_LAZYIO) == 0 &&
-			 queue_invalidate)
+		else if (queue_invalidate &&
+			 revoking == CEPH_CAP_FILE_CACHE &&
+			 (newcaps & CEPH_CAP_FILE_LAZYIO) == 0)
 			; /* do nothing yet, invalidation will be queued */
 		else if (cap == ci->i_auth_cap)
 			check_caps = 1; /* check auth cap only */
@@ -3339,7 +3383,8 @@ static void handle_cap_grant(struct inode *inode,
 	if (le32_to_cpu(grant->op) == CEPH_CAP_OP_IMPORT) {
 		if (newcaps & ~extra_info->issued)
 			wake = true;
-		kick_flushing_inode_caps(session->s_mdsc, session, inode);
+		ceph_kick_flushing_inode_caps(session, ci);
+		spin_unlock(&ci->i_ceph_lock);
 		up_read(&session->s_mdsc->snap_rwsem);
 	} else {
 		spin_unlock(&ci->i_ceph_lock);
@@ -3367,10 +3412,10 @@ static void handle_cap_grant(struct inode *inode,
 		wake_up_all(&ci->i_cap_wq);
 
 	if (check_caps == 1)
-		ceph_check_caps(ci, CHECK_CAPS_NODELAY|CHECK_CAPS_AUTHONLY,
+		ceph_check_caps(ci, CHECK_CAPS_AUTHONLY | CHECK_CAPS_NOINVAL,
 				session);
 	else if (check_caps == 2)
-		ceph_check_caps(ci, CHECK_CAPS_NODELAY, session);
+		ceph_check_caps(ci, CHECK_CAPS_NOINVAL, session);
 	else
 		mutex_unlock(&session->s_mutex);
 }
@@ -3619,8 +3664,6 @@ static void handle_cap_export(struct inode *inode, struct ceph_mds_caps *ex,
 		goto out_unlock;
 
 	if (target < 0) {
-		if (cap->mds_wanted | cap->issued)
-			ci->i_ceph_flags |= CEPH_I_CAP_DROPPED;
 		__ceph_remove_cap(cap, false);
 		goto out_unlock;
 	}
@@ -3668,7 +3711,7 @@ static void handle_cap_export(struct inode *inode, struct ceph_mds_caps *ex,
 		/* add placeholder for the export tagert */
 		int flag = (cap == ci->i_auth_cap) ? CEPH_CAP_FLAG_AUTH : 0;
 		tcap = new_cap;
-		ceph_add_cap(inode, tsession, t_cap_id, -1, issued, 0,
+		ceph_add_cap(inode, tsession, t_cap_id, issued, 0,
 			     t_seq - 1, t_mseq, (u64)-1, flag, &new_cap);
 
 		if (!list_empty(&ci->i_cap_flush_list) &&
@@ -3773,7 +3816,7 @@ static void handle_cap_import(struct ceph_mds_client *mdsc,
 	__ceph_caps_issued(ci, &issued);
 	issued |= __ceph_caps_dirty(ci);
 
-	ceph_add_cap(inode, session, cap_id, -1, caps, wanted, seq, mseq,
+	ceph_add_cap(inode, session, cap_id, caps, wanted, seq, mseq,
 		     realmino, CEPH_CAP_FLAG_AUTH, &new_cap);
 
 	ocap = peer >= 0 ? __get_cap_for_mds(ci, peer) : NULL;
@@ -4047,7 +4090,6 @@ void ceph_check_delayed_caps(struct ceph_mds_client *mdsc)
 {
 	struct inode *inode;
 	struct ceph_inode_info *ci;
-	int flags = CHECK_CAPS_NODELAY;
 
 	dout("check_delayed_caps\n");
 	while (1) {
@@ -4067,7 +4109,7 @@ void ceph_check_delayed_caps(struct ceph_mds_client *mdsc)
 
 		if (inode) {
 			dout("check_delayed_caps on %p\n", inode);
-			ceph_check_caps(ci, flags, NULL);
+			ceph_check_caps(ci, 0, NULL);
 			/* avoid calling iput_final() in tick thread */
 			ceph_async_iput(inode);
 		}
@@ -4092,7 +4134,7 @@ void ceph_flush_dirty_caps(struct ceph_mds_client *mdsc)
 		ihold(inode);
 		dout("flush_dirty_caps %p\n", inode);
 		spin_unlock(&mdsc->cap_dirty_lock);
-		ceph_check_caps(ci, CHECK_CAPS_NODELAY|CHECK_CAPS_FLUSH, NULL);
+		ceph_check_caps(ci, CHECK_CAPS_FLUSH, NULL);
 		iput(inode);
 		spin_lock(&mdsc->cap_dirty_lock);
 	}
@@ -4100,14 +4142,31 @@ void ceph_flush_dirty_caps(struct ceph_mds_client *mdsc)
 	dout("flush_dirty_caps done\n");
 }
 
-void __ceph_get_fmode(struct ceph_inode_info *ci, int fmode)
+void __ceph_touch_fmode(struct ceph_inode_info *ci,
+			struct ceph_mds_client *mdsc, int fmode)
+{
+	unsigned long now = jiffies;
+	if (fmode & CEPH_FILE_MODE_RD)
+		ci->i_last_rd = now;
+	if (fmode & CEPH_FILE_MODE_WR)
+		ci->i_last_wr = now;
+	/* queue periodic check */
+	if (fmode &&
+	    __ceph_is_any_real_caps(ci) &&
+	    list_empty(&ci->i_cap_delay_list))
+		__cap_delay_requeue(mdsc, ci);
+}
+
+void ceph_get_fmode(struct ceph_inode_info *ci, int fmode, int count)
 {
 	int i;
 	int bits = (fmode << 1) | 1;
+	spin_lock(&ci->i_ceph_lock);
 	for (i = 0; i < CEPH_FILE_MODE_BITS; i++) {
 		if (bits & (1 << i))
-			ci->i_nr_by_mode[i]++;
+			ci->i_nr_by_mode[i] += count;
 	}
+	spin_unlock(&ci->i_ceph_lock);
 }
 
 /*
@@ -4115,26 +4174,18 @@ void __ceph_get_fmode(struct ceph_inode_info *ci, int fmode)
  * we may need to release capabilities to the MDS (or schedule
  * their delayed release).
  */
-void ceph_put_fmode(struct ceph_inode_info *ci, int fmode)
+void ceph_put_fmode(struct ceph_inode_info *ci, int fmode, int count)
 {
-	int i, last = 0;
+	int i;
 	int bits = (fmode << 1) | 1;
 	spin_lock(&ci->i_ceph_lock);
 	for (i = 0; i < CEPH_FILE_MODE_BITS; i++) {
 		if (bits & (1 << i)) {
-			BUG_ON(ci->i_nr_by_mode[i] == 0);
-			if (--ci->i_nr_by_mode[i] == 0)
-				last++;
+			BUG_ON(ci->i_nr_by_mode[i] < count);
+			ci->i_nr_by_mode[i] -= count;
 		}
 	}
-	dout("put_fmode %p fmode %d {%d,%d,%d,%d}\n",
-	     &ci->vfs_inode, fmode,
-	     ci->i_nr_by_mode[0], ci->i_nr_by_mode[1],
-	     ci->i_nr_by_mode[2], ci->i_nr_by_mode[3]);
 	spin_unlock(&ci->i_ceph_lock);
-
-	if (last && ci->i_vino.snap == CEPH_NOSNAP)
-		ceph_check_caps(ci, 0, NULL);
 }
 
 /*
@@ -4152,7 +4203,6 @@ int ceph_drop_caps_for_unlink(struct inode *inode)
 	if (inode->i_nlink == 1) {
 		drop |= ~(__ceph_caps_wanted(ci) | CEPH_CAP_PIN);
 
-		ci->i_ceph_flags |= CEPH_I_NODELAY;
 		if (__ceph_caps_dirty(ci)) {
 			struct ceph_mds_client *mdsc =
 				ceph_inode_to_client(inode)->mdsc;
@@ -4208,8 +4258,6 @@ int ceph_encode_inode_release(void **p, struct inode *inode,
 		if (force || (cap->issued & drop)) {
 			if (cap->issued & drop) {
 				int wanted = __ceph_caps_wanted(ci);
-				if ((ci->i_ceph_flags & CEPH_I_NODELAY) == 0)
-					wanted |= cap->mds_wanted;
 				dout("encode_inode_release %p cap %p "
 				     "%s -> %s, wanted %s -> %s\n", inode, cap,
 				     ceph_cap_string(cap->issued),
diff --git a/fs/ceph/debugfs.c b/fs/ceph/debugfs.c
index fb7cabd9..481ac97 100644
--- a/fs/ceph/debugfs.c
+++ b/fs/ceph/debugfs.c
@@ -218,10 +218,10 @@ static int mds_sessions_show(struct seq_file *s, void *ptr)
 	return 0;
 }
 
-CEPH_DEFINE_SHOW_FUNC(mdsmap_show)
-CEPH_DEFINE_SHOW_FUNC(mdsc_show)
-CEPH_DEFINE_SHOW_FUNC(caps_show)
-CEPH_DEFINE_SHOW_FUNC(mds_sessions_show)
+DEFINE_SHOW_ATTRIBUTE(mdsmap);
+DEFINE_SHOW_ATTRIBUTE(mdsc);
+DEFINE_SHOW_ATTRIBUTE(caps);
+DEFINE_SHOW_ATTRIBUTE(mds_sessions);
 
 
 /*
@@ -281,25 +281,25 @@ void ceph_fs_debugfs_init(struct ceph_fs_client *fsc)
 					0400,
 					fsc->client->debugfs_dir,
 					fsc,
-					&mdsmap_show_fops);
+					&mdsmap_fops);
 
 	fsc->debugfs_mds_sessions = debugfs_create_file("mds_sessions",
 					0400,
 					fsc->client->debugfs_dir,
 					fsc,
-					&mds_sessions_show_fops);
+					&mds_sessions_fops);
 
 	fsc->debugfs_mdsc = debugfs_create_file("mdsc",
 						0400,
 						fsc->client->debugfs_dir,
 						fsc,
-						&mdsc_show_fops);
+						&mdsc_fops);
 
 	fsc->debugfs_caps = debugfs_create_file("caps",
 						   0400,
 						   fsc->client->debugfs_dir,
 						   fsc,
-						   &caps_show_fops);
+						   &caps_fops);
 }
 
 
diff --git a/fs/ceph/dir.c b/fs/ceph/dir.c
index d0cd0ab..4c4202c 100644
--- a/fs/ceph/dir.c
+++ b/fs/ceph/dir.c
@@ -335,8 +335,11 @@ static int ceph_readdir(struct file *file, struct dir_context *ctx)
 		ctx->pos = 2;
 	}
 
-	/* can we use the dcache? */
 	spin_lock(&ci->i_ceph_lock);
+	/* request Fx cap. if have Fx, we don't need to release Fs cap
+	 * for later create/unlink. */
+	__ceph_touch_fmode(ci, mdsc, CEPH_FILE_MODE_WR);
+	/* can we use the dcache? */
 	if (ceph_test_mount_opt(fsc, DCACHE) &&
 	    !ceph_test_mount_opt(fsc, NOASYNCREADDIR) &&
 	    ceph_snap(inode) != CEPH_SNAPDIR &&
@@ -752,7 +755,7 @@ static struct dentry *ceph_lookup(struct inode *dir, struct dentry *dentry,
 		struct ceph_dentry_info *di = ceph_dentry(dentry);
 
 		spin_lock(&ci->i_ceph_lock);
-		dout(" dir %p flags are %d\n", dir, ci->i_ceph_flags);
+		dout(" dir %p flags are 0x%lx\n", dir, ci->i_ceph_flags);
 		if (strncmp(dentry->d_name.name,
 			    fsc->mount_options->snapdir_name,
 			    dentry->d_name.len) &&
@@ -760,6 +763,7 @@ static struct dentry *ceph_lookup(struct inode *dir, struct dentry *dentry,
 		    ceph_test_mount_opt(fsc, DCACHE) &&
 		    __ceph_dir_is_complete(ci) &&
 		    (__ceph_caps_issued_mask(ci, CEPH_CAP_FILE_SHARED, 1))) {
+			__ceph_touch_fmode(ci, mdsc, CEPH_FILE_MODE_RD);
 			spin_unlock(&ci->i_ceph_lock);
 			dout(" dir %p complete, -ENOENT\n", dir);
 			d_add(dentry, NULL);
@@ -1036,6 +1040,78 @@ static int ceph_link(struct dentry *old_dentry, struct inode *dir,
 	return err;
 }
 
+static void ceph_async_unlink_cb(struct ceph_mds_client *mdsc,
+				 struct ceph_mds_request *req)
+{
+	int result = req->r_err ? req->r_err :
+			le32_to_cpu(req->r_reply_info.head->result);
+
+	if (result == -EJUKEBOX)
+		goto out;
+
+	/* If op failed, mark everyone involved for errors */
+	if (result) {
+		int pathlen = 0;
+		u64 base = 0;
+		char *path = ceph_mdsc_build_path(req->r_dentry, &pathlen,
+						  &base, 0);
+
+		/* mark error on parent + clear complete */
+		mapping_set_error(req->r_parent->i_mapping, result);
+		ceph_dir_clear_complete(req->r_parent);
+
+		/* drop the dentry -- we don't know its status */
+		if (!d_unhashed(req->r_dentry))
+			d_drop(req->r_dentry);
+
+		/* mark inode itself for an error (since metadata is bogus) */
+		mapping_set_error(req->r_old_inode->i_mapping, result);
+
+		pr_warn("ceph: async unlink failure path=(%llx)%s result=%d!\n",
+			base, IS_ERR(path) ? "<<bad>>" : path, result);
+		ceph_mdsc_free_path(path, pathlen);
+	}
+out:
+	iput(req->r_old_inode);
+	ceph_mdsc_release_dir_caps(req);
+}
+
+static int get_caps_for_async_unlink(struct inode *dir, struct dentry *dentry)
+{
+	struct ceph_inode_info *ci = ceph_inode(dir);
+	struct ceph_dentry_info *di;
+	int got = 0, want = CEPH_CAP_FILE_EXCL | CEPH_CAP_DIR_UNLINK;
+
+	spin_lock(&ci->i_ceph_lock);
+	if ((__ceph_caps_issued(ci, NULL) & want) == want) {
+		ceph_take_cap_refs(ci, want, false);
+		got = want;
+	}
+	spin_unlock(&ci->i_ceph_lock);
+
+	/* If we didn't get anything, return 0 */
+	if (!got)
+		return 0;
+
+        spin_lock(&dentry->d_lock);
+        di = ceph_dentry(dentry);
+	/*
+	 * - We are holding Fx, which implies Fs caps.
+	 * - Only support async unlink for primary linkage
+	 */
+	if (atomic_read(&ci->i_shared_gen) != di->lease_shared_gen ||
+	    !(di->flags & CEPH_DENTRY_PRIMARY_LINK))
+		want = 0;
+        spin_unlock(&dentry->d_lock);
+
+	/* Do we still want what we've got? */
+	if (want == got)
+		return got;
+
+	ceph_put_cap_refs(ci, got);
+	return 0;
+}
+
 /*
  * rmdir and unlink are differ only by the metadata op code
  */
@@ -1045,6 +1121,7 @@ static int ceph_unlink(struct inode *dir, struct dentry *dentry)
 	struct ceph_mds_client *mdsc = fsc->mdsc;
 	struct inode *inode = d_inode(dentry);
 	struct ceph_mds_request *req;
+	bool try_async = ceph_test_mount_opt(fsc, ASYNC_DIROPS);
 	int err = -EROFS;
 	int op;
 
@@ -1059,6 +1136,7 @@ static int ceph_unlink(struct inode *dir, struct dentry *dentry)
 			CEPH_MDS_OP_RMDIR : CEPH_MDS_OP_UNLINK;
 	} else
 		goto out;
+retry:
 	req = ceph_mdsc_create_request(mdsc, op, USE_AUTH_MDS);
 	if (IS_ERR(req)) {
 		err = PTR_ERR(req);
@@ -1067,13 +1145,39 @@ static int ceph_unlink(struct inode *dir, struct dentry *dentry)
 	req->r_dentry = dget(dentry);
 	req->r_num_caps = 2;
 	req->r_parent = dir;
-	set_bit(CEPH_MDS_R_PARENT_LOCKED, &req->r_req_flags);
 	req->r_dentry_drop = CEPH_CAP_FILE_SHARED;
 	req->r_dentry_unless = CEPH_CAP_FILE_EXCL;
 	req->r_inode_drop = ceph_drop_caps_for_unlink(inode);
-	err = ceph_mdsc_do_request(mdsc, dir, req);
-	if (!err && !req->r_reply_info.head->is_dentry)
-		d_delete(dentry);
+
+	if (try_async && op == CEPH_MDS_OP_UNLINK &&
+	    (req->r_dir_caps = get_caps_for_async_unlink(dir, dentry))) {
+		dout("async unlink on %lu/%.*s caps=%s", dir->i_ino,
+		     dentry->d_name.len, dentry->d_name.name,
+		     ceph_cap_string(req->r_dir_caps));
+		set_bit(CEPH_MDS_R_ASYNC, &req->r_req_flags);
+		req->r_callback = ceph_async_unlink_cb;
+		req->r_old_inode = d_inode(dentry);
+		ihold(req->r_old_inode);
+		err = ceph_mdsc_submit_request(mdsc, dir, req);
+		if (!err) {
+			/*
+			 * We have enough caps, so we assume that the unlink
+			 * will succeed. Fix up the target inode and dcache.
+			 */
+			drop_nlink(inode);
+			d_delete(dentry);
+		} else if (err == -EJUKEBOX) {
+			try_async = false;
+			ceph_mdsc_put_request(req);
+			goto retry;
+		}
+	} else {
+		set_bit(CEPH_MDS_R_PARENT_LOCKED, &req->r_req_flags);
+		err = ceph_mdsc_do_request(mdsc, dir, req);
+		if (!err && !req->r_reply_info.head->is_dentry)
+			d_delete(dentry);
+	}
+
 	ceph_mdsc_put_request(req);
 out:
 	return err;
@@ -1411,6 +1515,7 @@ void ceph_invalidate_dentry_lease(struct dentry *dentry)
 	spin_lock(&dentry->d_lock);
 	di->time = jiffies;
 	di->lease_shared_gen = 0;
+	di->flags &= ~CEPH_DENTRY_PRIMARY_LINK;
 	__dentry_lease_unlist(di);
 	spin_unlock(&dentry->d_lock);
 }
@@ -1520,7 +1625,8 @@ static int __dir_lease_try_check(const struct dentry *dentry)
 /*
  * Check if directory-wide content lease/cap is valid.
  */
-static int dir_lease_is_valid(struct inode *dir, struct dentry *dentry)
+static int dir_lease_is_valid(struct inode *dir, struct dentry *dentry,
+			      struct ceph_mds_client *mdsc)
 {
 	struct ceph_inode_info *ci = ceph_inode(dir);
 	int valid;
@@ -1528,7 +1634,10 @@ static int dir_lease_is_valid(struct inode *dir, struct dentry *dentry)
 
 	spin_lock(&ci->i_ceph_lock);
 	valid = __ceph_caps_issued_mask(ci, CEPH_CAP_FILE_SHARED, 1);
-	shared_gen = atomic_read(&ci->i_shared_gen);
+	if (valid) {
+		__ceph_touch_fmode(ci, mdsc, CEPH_FILE_MODE_RD);
+		shared_gen = atomic_read(&ci->i_shared_gen);
+	}
 	spin_unlock(&ci->i_ceph_lock);
 	if (valid) {
 		struct ceph_dentry_info *di;
@@ -1554,6 +1663,7 @@ static int ceph_d_revalidate(struct dentry *dentry, unsigned int flags)
 	int valid = 0;
 	struct dentry *parent;
 	struct inode *dir, *inode;
+	struct ceph_mds_client *mdsc;
 
 	if (flags & LOOKUP_RCU) {
 		parent = READ_ONCE(dentry->d_parent);
@@ -1570,6 +1680,8 @@ static int ceph_d_revalidate(struct dentry *dentry, unsigned int flags)
 	dout("d_revalidate %p '%pd' inode %p offset 0x%llx\n", dentry,
 	     dentry, inode, ceph_dentry(dentry)->offset);
 
+	mdsc = ceph_sb_to_client(dir->i_sb)->mdsc;
+
 	/* always trust cached snapped dentries, snapdir dentry */
 	if (ceph_snap(dir) != CEPH_NOSNAP) {
 		dout("d_revalidate %p '%pd' inode %p is SNAPPED\n", dentry,
@@ -1581,7 +1693,7 @@ static int ceph_d_revalidate(struct dentry *dentry, unsigned int flags)
 		valid = dentry_lease_is_valid(dentry, flags);
 		if (valid == -ECHILD)
 			return valid;
-		if (valid || dir_lease_is_valid(dir, dentry)) {
+		if (valid || dir_lease_is_valid(dir, dentry, mdsc)) {
 			if (inode)
 				valid = ceph_is_any_caps(inode);
 			else
@@ -1590,8 +1702,6 @@ static int ceph_d_revalidate(struct dentry *dentry, unsigned int flags)
 	}
 
 	if (!valid) {
-		struct ceph_mds_client *mdsc =
-			ceph_sb_to_client(dir->i_sb)->mdsc;
 		struct ceph_mds_request *req;
 		int op, err;
 		u32 mask;
diff --git a/fs/ceph/export.c b/fs/ceph/export.c
index b6bfa94..79dc068 100644
--- a/fs/ceph/export.c
+++ b/fs/ceph/export.c
@@ -315,6 +315,11 @@ static struct dentry *__get_parent(struct super_block *sb,
 
 	req->r_num_caps = 1;
 	err = ceph_mdsc_do_request(mdsc, NULL, req);
+	if (err) {
+		ceph_mdsc_put_request(req);
+		return ERR_PTR(err);
+	}
+
 	inode = req->r_target_inode;
 	if (inode)
 		ihold(inode);
diff --git a/fs/ceph/file.c b/fs/ceph/file.c
index 5a478cd..afdfca9 100644
--- a/fs/ceph/file.c
+++ b/fs/ceph/file.c
@@ -212,10 +212,8 @@ static int ceph_init_file_info(struct inode *inode, struct file *file,
 	if (isdir) {
 		struct ceph_dir_file_info *dfi =
 			kmem_cache_zalloc(ceph_dir_file_cachep, GFP_KERNEL);
-		if (!dfi) {
-			ceph_put_fmode(ci, fmode); /* clean up */
+		if (!dfi)
 			return -ENOMEM;
-		}
 
 		file->private_data = dfi;
 		fi = &dfi->file_info;
@@ -223,15 +221,15 @@ static int ceph_init_file_info(struct inode *inode, struct file *file,
 		dfi->readdir_cache_idx = -1;
 	} else {
 		fi = kmem_cache_zalloc(ceph_file_cachep, GFP_KERNEL);
-		if (!fi) {
-			ceph_put_fmode(ci, fmode); /* clean up */
+		if (!fi)
 			return -ENOMEM;
-		}
 
 		file->private_data = fi;
 	}
 
+	ceph_get_fmode(ci, fmode, 1);
 	fi->fmode = fmode;
+
 	spin_lock_init(&fi->rw_contexts_lock);
 	INIT_LIST_HEAD(&fi->rw_contexts);
 	fi->meta_err = errseq_sample(&ci->i_meta_err);
@@ -263,7 +261,6 @@ static int ceph_init_file(struct inode *inode, struct file *file, int fmode)
 	case S_IFLNK:
 		dout("init_file %p %p 0%o (symlink)\n", inode, file,
 		     inode->i_mode);
-		ceph_put_fmode(ceph_inode(inode), fmode); /* clean up */
 		break;
 
 	default:
@@ -273,7 +270,6 @@ static int ceph_init_file(struct inode *inode, struct file *file, int fmode)
 		 * we need to drop the open ref now, since we don't
 		 * have .release set to ceph_release.
 		 */
-		ceph_put_fmode(ceph_inode(inode), fmode); /* clean up */
 		BUG_ON(inode->i_fop->release == ceph_release);
 
 		/* call the proper open fop */
@@ -285,14 +281,15 @@ static int ceph_init_file(struct inode *inode, struct file *file, int fmode)
 /*
  * try renew caps after session gets killed.
  */
-int ceph_renew_caps(struct inode *inode)
+int ceph_renew_caps(struct inode *inode, int fmode)
 {
-	struct ceph_mds_client *mdsc = ceph_sb_to_client(inode->i_sb)->mdsc;
+	struct ceph_mds_client *mdsc = ceph_inode_to_client(inode)->mdsc;
 	struct ceph_inode_info *ci = ceph_inode(inode);
 	struct ceph_mds_request *req;
 	int err, flags, wanted;
 
 	spin_lock(&ci->i_ceph_lock);
+	__ceph_touch_fmode(ci, mdsc, fmode);
 	wanted = __ceph_caps_file_wanted(ci);
 	if (__ceph_is_any_real_caps(ci) &&
 	    (!(wanted & CEPH_CAP_ANY_WR) || ci->i_auth_cap)) {
@@ -326,7 +323,6 @@ int ceph_renew_caps(struct inode *inode)
 	req->r_inode = inode;
 	ihold(inode);
 	req->r_num_caps = 1;
-	req->r_fmode = -1;
 
 	err = ceph_mdsc_do_request(mdsc, NULL, req);
 	ceph_mdsc_put_request(req);
@@ -372,9 +368,6 @@ int ceph_open(struct inode *inode, struct file *file)
 
 	/* trivially open snapdir */
 	if (ceph_snap(inode) == CEPH_SNAPDIR) {
-		spin_lock(&ci->i_ceph_lock);
-		__ceph_get_fmode(ci, fmode);
-		spin_unlock(&ci->i_ceph_lock);
 		return ceph_init_file(inode, file, fmode);
 	}
 
@@ -392,7 +385,7 @@ int ceph_open(struct inode *inode, struct file *file)
 		dout("open %p fmode %d want %s issued %s using existing\n",
 		     inode, fmode, ceph_cap_string(wanted),
 		     ceph_cap_string(issued));
-		__ceph_get_fmode(ci, fmode);
+		__ceph_touch_fmode(ci, mdsc, fmode);
 		spin_unlock(&ci->i_ceph_lock);
 
 		/* adjust wanted? */
@@ -404,7 +397,7 @@ int ceph_open(struct inode *inode, struct file *file)
 		return ceph_init_file(inode, file, fmode);
 	} else if (ceph_snap(inode) != CEPH_NOSNAP &&
 		   (ci->i_snap_caps & wanted) == wanted) {
-		__ceph_get_fmode(ci, fmode);
+		__ceph_touch_fmode(ci, mdsc, fmode);
 		spin_unlock(&ci->i_ceph_lock);
 		return ceph_init_file(inode, file, fmode);
 	}
@@ -430,6 +423,236 @@ int ceph_open(struct inode *inode, struct file *file)
 	return err;
 }
 
+/* Clone the layout from a synchronous create, if the dir now has Dc caps */
+static void
+cache_file_layout(struct inode *dst, struct inode *src)
+{
+	struct ceph_inode_info *cdst = ceph_inode(dst);
+	struct ceph_inode_info *csrc = ceph_inode(src);
+
+	spin_lock(&cdst->i_ceph_lock);
+	if ((__ceph_caps_issued(cdst, NULL) & CEPH_CAP_DIR_CREATE) &&
+	    !ceph_file_layout_is_valid(&cdst->i_cached_layout)) {
+		memcpy(&cdst->i_cached_layout, &csrc->i_layout,
+			sizeof(cdst->i_cached_layout));
+		rcu_assign_pointer(cdst->i_cached_layout.pool_ns,
+				   ceph_try_get_string(csrc->i_layout.pool_ns));
+	}
+	spin_unlock(&cdst->i_ceph_lock);
+}
+
+/*
+ * Try to set up an async create. We need caps, a file layout, and inode number,
+ * and either a lease on the dentry or complete dir info. If any of those
+ * criteria are not satisfied, then return false and the caller can go
+ * synchronous.
+ */
+static int try_prep_async_create(struct inode *dir, struct dentry *dentry,
+				 struct ceph_file_layout *lo, u64 *pino)
+{
+	struct ceph_inode_info *ci = ceph_inode(dir);
+	struct ceph_dentry_info *di = ceph_dentry(dentry);
+	int got = 0, want = CEPH_CAP_FILE_EXCL | CEPH_CAP_DIR_CREATE;
+	u64 ino;
+
+	spin_lock(&ci->i_ceph_lock);
+	/* No auth cap means no chance for Dc caps */
+	if (!ci->i_auth_cap)
+		goto no_async;
+
+	/* Any delegated inos? */
+	if (xa_empty(&ci->i_auth_cap->session->s_delegated_inos))
+		goto no_async;
+
+	if (!ceph_file_layout_is_valid(&ci->i_cached_layout))
+		goto no_async;
+
+	if ((__ceph_caps_issued(ci, NULL) & want) != want)
+		goto no_async;
+
+	if (d_in_lookup(dentry)) {
+		if (!__ceph_dir_is_complete(ci))
+			goto no_async;
+		spin_lock(&dentry->d_lock);
+		di->lease_shared_gen = atomic_read(&ci->i_shared_gen);
+		spin_unlock(&dentry->d_lock);
+	} else if (atomic_read(&ci->i_shared_gen) !=
+		   READ_ONCE(di->lease_shared_gen)) {
+		goto no_async;
+	}
+
+	ino = ceph_get_deleg_ino(ci->i_auth_cap->session);
+	if (!ino)
+		goto no_async;
+
+	*pino = ino;
+	ceph_take_cap_refs(ci, want, false);
+	memcpy(lo, &ci->i_cached_layout, sizeof(*lo));
+	rcu_assign_pointer(lo->pool_ns,
+			   ceph_try_get_string(ci->i_cached_layout.pool_ns));
+	got = want;
+no_async:
+	spin_unlock(&ci->i_ceph_lock);
+	return got;
+}
+
+static void restore_deleg_ino(struct inode *dir, u64 ino)
+{
+	struct ceph_inode_info *ci = ceph_inode(dir);
+	struct ceph_mds_session *s = NULL;
+
+	spin_lock(&ci->i_ceph_lock);
+	if (ci->i_auth_cap)
+		s = ceph_get_mds_session(ci->i_auth_cap->session);
+	spin_unlock(&ci->i_ceph_lock);
+	if (s) {
+		int err = ceph_restore_deleg_ino(s, ino);
+		if (err)
+			pr_warn("ceph: unable to restore delegated ino 0x%llx to session: %d\n",
+				ino, err);
+		ceph_put_mds_session(s);
+	}
+}
+
+static void ceph_async_create_cb(struct ceph_mds_client *mdsc,
+                                 struct ceph_mds_request *req)
+{
+	int result = req->r_err ? req->r_err :
+			le32_to_cpu(req->r_reply_info.head->result);
+
+	if (result == -EJUKEBOX)
+		goto out;
+
+	mapping_set_error(req->r_parent->i_mapping, result);
+
+	if (result) {
+		struct dentry *dentry = req->r_dentry;
+		int pathlen = 0;
+		u64 base = 0;
+		char *path = ceph_mdsc_build_path(req->r_dentry, &pathlen,
+						  &base, 0);
+
+		ceph_dir_clear_complete(req->r_parent);
+		if (!d_unhashed(dentry))
+			d_drop(dentry);
+
+		/* FIXME: start returning I/O errors on all accesses? */
+		pr_warn("ceph: async create failure path=(%llx)%s result=%d!\n",
+			base, IS_ERR(path) ? "<<bad>>" : path, result);
+		ceph_mdsc_free_path(path, pathlen);
+	}
+
+	if (req->r_target_inode) {
+		struct ceph_inode_info *ci = ceph_inode(req->r_target_inode);
+		u64 ino = ceph_vino(req->r_target_inode).ino;
+
+		if (req->r_deleg_ino != ino)
+			pr_warn("%s: inode number mismatch! err=%d deleg_ino=0x%llx target=0x%llx\n",
+				__func__, req->r_err, req->r_deleg_ino, ino);
+		mapping_set_error(req->r_target_inode->i_mapping, result);
+
+		spin_lock(&ci->i_ceph_lock);
+		if (ci->i_ceph_flags & CEPH_I_ASYNC_CREATE) {
+			ci->i_ceph_flags &= ~CEPH_I_ASYNC_CREATE;
+			wake_up_bit(&ci->i_ceph_flags, CEPH_ASYNC_CREATE_BIT);
+		}
+		ceph_kick_flushing_inode_caps(req->r_session, ci);
+		spin_unlock(&ci->i_ceph_lock);
+	} else {
+		pr_warn("%s: no req->r_target_inode for 0x%llx\n", __func__,
+			req->r_deleg_ino);
+	}
+out:
+	ceph_mdsc_release_dir_caps(req);
+}
+
+static int ceph_finish_async_create(struct inode *dir, struct dentry *dentry,
+				    struct file *file, umode_t mode,
+				    struct ceph_mds_request *req,
+				    struct ceph_acl_sec_ctx *as_ctx,
+				    struct ceph_file_layout *lo)
+{
+	int ret;
+	char xattr_buf[4];
+	struct ceph_mds_reply_inode in = { };
+	struct ceph_mds_reply_info_in iinfo = { .in = &in };
+	struct ceph_inode_info *ci = ceph_inode(dir);
+	struct inode *inode;
+	struct timespec64 now;
+	struct ceph_vino vino = { .ino = req->r_deleg_ino,
+				  .snap = CEPH_NOSNAP };
+
+	ktime_get_real_ts64(&now);
+
+	inode = ceph_get_inode(dentry->d_sb, vino);
+	if (IS_ERR(inode))
+		return PTR_ERR(inode);
+
+	iinfo.inline_version = CEPH_INLINE_NONE;
+	iinfo.change_attr = 1;
+	ceph_encode_timespec64(&iinfo.btime, &now);
+
+	iinfo.xattr_len = ARRAY_SIZE(xattr_buf);
+	iinfo.xattr_data = xattr_buf;
+	memset(iinfo.xattr_data, 0, iinfo.xattr_len);
+
+	in.ino = cpu_to_le64(vino.ino);
+	in.snapid = cpu_to_le64(CEPH_NOSNAP);
+	in.version = cpu_to_le64(1);	// ???
+	in.cap.caps = in.cap.wanted = cpu_to_le32(CEPH_CAP_ALL_FILE);
+	in.cap.cap_id = cpu_to_le64(1);
+	in.cap.realm = cpu_to_le64(ci->i_snap_realm->ino);
+	in.cap.flags = CEPH_CAP_FLAG_AUTH;
+	in.ctime = in.mtime = in.atime = iinfo.btime;
+	in.mode = cpu_to_le32((u32)mode);
+	in.truncate_seq = cpu_to_le32(1);
+	in.truncate_size = cpu_to_le64(-1ULL);
+	in.xattr_version = cpu_to_le64(1);
+	in.uid = cpu_to_le32(from_kuid(&init_user_ns, current_fsuid()));
+	in.gid = cpu_to_le32(from_kgid(&init_user_ns, dir->i_mode & S_ISGID ?
+				dir->i_gid : current_fsgid()));
+	in.nlink = cpu_to_le32(1);
+	in.max_size = cpu_to_le64(lo->stripe_unit);
+
+	ceph_file_layout_to_legacy(lo, &in.layout);
+
+	ret = ceph_fill_inode(inode, NULL, &iinfo, NULL, req->r_session,
+			      req->r_fmode, NULL);
+	if (ret) {
+		dout("%s failed to fill inode: %d\n", __func__, ret);
+		ceph_dir_clear_complete(dir);
+		if (!d_unhashed(dentry))
+			d_drop(dentry);
+		if (inode->i_state & I_NEW)
+			discard_new_inode(inode);
+	} else {
+		struct dentry *dn;
+
+		dout("%s d_adding new inode 0x%llx to 0x%lx/%s\n", __func__,
+			vino.ino, dir->i_ino, dentry->d_name.name);
+		ceph_dir_clear_ordered(dir);
+		ceph_init_inode_acls(inode, as_ctx);
+		if (inode->i_state & I_NEW) {
+			/*
+			 * If it's not I_NEW, then someone created this before
+			 * we got here. Assume the server is aware of it at
+			 * that point and don't worry about setting
+			 * CEPH_I_ASYNC_CREATE.
+			 */
+			ceph_inode(inode)->i_ceph_flags = CEPH_I_ASYNC_CREATE;
+			unlock_new_inode(inode);
+		}
+		if (d_in_lookup(dentry) || d_really_is_negative(dentry)) {
+			if (!d_unhashed(dentry))
+				d_drop(dentry);
+			dn = d_splice_alias(inode, dentry);
+			WARN_ON_ONCE(dn && dn != dentry);
+		}
+		file->f_mode |= FMODE_CREATED;
+		ret = finish_open(file, dentry, ceph_open);
+	}
+	return ret;
+}
 
 /*
  * Do a lookup + open with a single request.  If we get a non-existent
@@ -443,6 +666,7 @@ int ceph_atomic_open(struct inode *dir, struct dentry *dentry,
 	struct ceph_mds_request *req;
 	struct dentry *dn;
 	struct ceph_acl_sec_ctx as_ctx = {};
+	bool try_async = ceph_test_mount_opt(fsc, ASYNC_DIROPS);
 	int mask;
 	int err;
 
@@ -466,7 +690,7 @@ int ceph_atomic_open(struct inode *dir, struct dentry *dentry,
 		/* If it's not being looked up, it's negative */
 		return -ENOENT;
 	}
-
+retry:
 	/* do the open */
 	req = prepare_open_request(dir->i_sb, flags, mode);
 	if (IS_ERR(req)) {
@@ -475,21 +699,43 @@ int ceph_atomic_open(struct inode *dir, struct dentry *dentry,
 	}
 	req->r_dentry = dget(dentry);
 	req->r_num_caps = 2;
+	mask = CEPH_STAT_CAP_INODE | CEPH_CAP_AUTH_SHARED;
+	if (ceph_security_xattr_wanted(dir))
+		mask |= CEPH_CAP_XATTR_SHARED;
+	req->r_args.open.mask = cpu_to_le32(mask);
+	req->r_parent = dir;
+
 	if (flags & O_CREAT) {
+		struct ceph_file_layout lo;
+
 		req->r_dentry_drop = CEPH_CAP_FILE_SHARED | CEPH_CAP_AUTH_EXCL;
 		req->r_dentry_unless = CEPH_CAP_FILE_EXCL;
 		if (as_ctx.pagelist) {
 			req->r_pagelist = as_ctx.pagelist;
 			as_ctx.pagelist = NULL;
 		}
+		if (try_async &&
+		    (req->r_dir_caps =
+		      try_prep_async_create(dir, dentry, &lo,
+					    &req->r_deleg_ino))) {
+			set_bit(CEPH_MDS_R_ASYNC, &req->r_req_flags);
+			req->r_args.open.flags |= cpu_to_le32(CEPH_O_EXCL);
+			req->r_callback = ceph_async_create_cb;
+			err = ceph_mdsc_submit_request(mdsc, dir, req);
+			if (!err) {
+				err = ceph_finish_async_create(dir, dentry,
+							file, mode, req,
+							&as_ctx, &lo);
+			} else if (err == -EJUKEBOX) {
+				restore_deleg_ino(dir, req->r_deleg_ino);
+				ceph_mdsc_put_request(req);
+				try_async = false;
+				goto retry;
+			}
+			goto out_req;
+		}
 	}
 
-       mask = CEPH_STAT_CAP_INODE | CEPH_CAP_AUTH_SHARED;
-       if (ceph_security_xattr_wanted(dir))
-               mask |= CEPH_CAP_XATTR_SHARED;
-       req->r_args.open.mask = cpu_to_le32(mask);
-
-	req->r_parent = dir;
 	set_bit(CEPH_MDS_R_PARENT_LOCKED, &req->r_req_flags);
 	err = ceph_mdsc_do_request(mdsc,
 				   (flags & (O_CREAT|O_TRUNC)) ? dir : NULL,
@@ -518,14 +764,15 @@ int ceph_atomic_open(struct inode *dir, struct dentry *dentry,
 	} else {
 		dout("atomic_open finish_open on dn %p\n", dn);
 		if (req->r_op == CEPH_MDS_OP_CREATE && req->r_reply_info.has_create_ino) {
-			ceph_init_inode_acls(d_inode(dentry), &as_ctx);
+			struct inode *newino = d_inode(dentry);
+
+			cache_file_layout(dir, newino);
+			ceph_init_inode_acls(newino, &as_ctx);
 			file->f_mode |= FMODE_CREATED;
 		}
 		err = finish_open(file, dentry, ceph_open);
 	}
 out_req:
-	if (!req->r_err && req->r_target_inode)
-		ceph_put_fmode(ceph_inode(req->r_target_inode), req->r_fmode);
 	ceph_mdsc_put_request(req);
 out_ctx:
 	ceph_release_acl_sec_ctx(&as_ctx);
@@ -542,7 +789,7 @@ int ceph_release(struct inode *inode, struct file *file)
 		dout("release inode %p dir file %p\n", inode, file);
 		WARN_ON(!list_empty(&dfi->file_info.rw_contexts));
 
-		ceph_put_fmode(ci, dfi->file_info.fmode);
+		ceph_put_fmode(ci, dfi->file_info.fmode, 1);
 
 		if (dfi->last_readdir)
 			ceph_mdsc_put_request(dfi->last_readdir);
@@ -554,7 +801,8 @@ int ceph_release(struct inode *inode, struct file *file)
 		dout("release inode %p regular file %p\n", inode, file);
 		WARN_ON(!list_empty(&fi->rw_contexts));
 
-		ceph_put_fmode(ci, fi->fmode);
+		ceph_put_fmode(ci, fi->fmode, 1);
+
 		kmem_cache_free(ceph_file_cachep, fi);
 	}
 
@@ -1567,7 +1815,7 @@ static ssize_t ceph_write_iter(struct kiocb *iocb, struct iov_iter *from)
 		if (dirty)
 			__mark_inode_dirty(inode, dirty);
 		if (ceph_quota_is_max_bytes_approaching(inode, iocb->ki_pos))
-			ceph_check_caps(ci, CHECK_CAPS_NODELAY, NULL);
+			ceph_check_caps(ci, 0, NULL);
 	}
 
 	dout("aio_write %p %llx.%llx %llu~%u  dropping cap refs on %s\n",
@@ -1944,6 +2192,71 @@ static int is_file_size_ok(struct inode *src_inode, struct inode *dst_inode,
 	return 0;
 }
 
+static ssize_t ceph_do_objects_copy(struct ceph_inode_info *src_ci, u64 *src_off,
+				    struct ceph_inode_info *dst_ci, u64 *dst_off,
+				    struct ceph_fs_client *fsc,
+				    size_t len, unsigned int flags)
+{
+	struct ceph_object_locator src_oloc, dst_oloc;
+	struct ceph_object_id src_oid, dst_oid;
+	size_t bytes = 0;
+	u64 src_objnum, src_objoff, dst_objnum, dst_objoff;
+	u32 src_objlen, dst_objlen;
+	u32 object_size = src_ci->i_layout.object_size;
+	int ret;
+
+	src_oloc.pool = src_ci->i_layout.pool_id;
+	src_oloc.pool_ns = ceph_try_get_string(src_ci->i_layout.pool_ns);
+	dst_oloc.pool = dst_ci->i_layout.pool_id;
+	dst_oloc.pool_ns = ceph_try_get_string(dst_ci->i_layout.pool_ns);
+
+	while (len >= object_size) {
+		ceph_calc_file_object_mapping(&src_ci->i_layout, *src_off,
+					      object_size, &src_objnum,
+					      &src_objoff, &src_objlen);
+		ceph_calc_file_object_mapping(&dst_ci->i_layout, *dst_off,
+					      object_size, &dst_objnum,
+					      &dst_objoff, &dst_objlen);
+		ceph_oid_init(&src_oid);
+		ceph_oid_printf(&src_oid, "%llx.%08llx",
+				src_ci->i_vino.ino, src_objnum);
+		ceph_oid_init(&dst_oid);
+		ceph_oid_printf(&dst_oid, "%llx.%08llx",
+				dst_ci->i_vino.ino, dst_objnum);
+		/* Do an object remote copy */
+		ret = ceph_osdc_copy_from(&fsc->client->osdc,
+					  src_ci->i_vino.snap, 0,
+					  &src_oid, &src_oloc,
+					  CEPH_OSD_OP_FLAG_FADVISE_SEQUENTIAL |
+					  CEPH_OSD_OP_FLAG_FADVISE_NOCACHE,
+					  &dst_oid, &dst_oloc,
+					  CEPH_OSD_OP_FLAG_FADVISE_SEQUENTIAL |
+					  CEPH_OSD_OP_FLAG_FADVISE_DONTNEED,
+					  dst_ci->i_truncate_seq,
+					  dst_ci->i_truncate_size,
+					  CEPH_OSD_COPY_FROM_FLAG_TRUNCATE_SEQ);
+		if (ret) {
+			if (ret == -EOPNOTSUPP) {
+				fsc->have_copy_from2 = false;
+				pr_notice("OSDs don't support copy-from2; disabling copy offload\n");
+			}
+			dout("ceph_osdc_copy_from returned %d\n", ret);
+			if (!bytes)
+				bytes = ret;
+			goto out;
+		}
+		len -= object_size;
+		bytes += object_size;
+		*src_off += object_size;
+		*dst_off += object_size;
+	}
+
+out:
+	ceph_oloc_destroy(&src_oloc);
+	ceph_oloc_destroy(&dst_oloc);
+	return bytes;
+}
+
 static ssize_t __ceph_copy_file_range(struct file *src_file, loff_t src_off,
 				      struct file *dst_file, loff_t dst_off,
 				      size_t len, unsigned int flags)
@@ -1954,14 +2267,11 @@ static ssize_t __ceph_copy_file_range(struct file *src_file, loff_t src_off,
 	struct ceph_inode_info *dst_ci = ceph_inode(dst_inode);
 	struct ceph_cap_flush *prealloc_cf;
 	struct ceph_fs_client *src_fsc = ceph_inode_to_client(src_inode);
-	struct ceph_object_locator src_oloc, dst_oloc;
-	struct ceph_object_id src_oid, dst_oid;
-	loff_t endoff = 0, size;
-	ssize_t ret = -EIO;
+	loff_t size;
+	ssize_t ret = -EIO, bytes;
 	u64 src_objnum, dst_objnum, src_objoff, dst_objoff;
-	u32 src_objlen, dst_objlen, object_size;
+	u32 src_objlen, dst_objlen;
 	int src_got = 0, dst_got = 0, err, dirty;
-	bool do_final_copy = false;
 
 	if (src_inode->i_sb != dst_inode->i_sb) {
 		struct ceph_fs_client *dst_fsc = ceph_inode_to_client(dst_inode);
@@ -2039,22 +2349,14 @@ static ssize_t __ceph_copy_file_range(struct file *src_file, loff_t src_off,
 	if (ret < 0)
 		goto out_caps;
 
-	size = i_size_read(dst_inode);
-	endoff = dst_off + len;
-
 	/* Drop dst file cached pages */
 	ret = invalidate_inode_pages2_range(dst_inode->i_mapping,
 					    dst_off >> PAGE_SHIFT,
-					    endoff >> PAGE_SHIFT);
+					    (dst_off + len) >> PAGE_SHIFT);
 	if (ret < 0) {
 		dout("Failed to invalidate inode pages (%zd)\n", ret);
 		ret = 0; /* XXX */
 	}
-	src_oloc.pool = src_ci->i_layout.pool_id;
-	src_oloc.pool_ns = ceph_try_get_string(src_ci->i_layout.pool_ns);
-	dst_oloc.pool = dst_ci->i_layout.pool_id;
-	dst_oloc.pool_ns = ceph_try_get_string(dst_ci->i_layout.pool_ns);
-
 	ceph_calc_file_object_mapping(&src_ci->i_layout, src_off,
 				      src_ci->i_layout.object_size,
 				      &src_objnum, &src_objoff, &src_objlen);
@@ -2073,6 +2375,8 @@ static ssize_t __ceph_copy_file_range(struct file *src_file, loff_t src_off,
 	 * starting at the src_off
 	 */
 	if (src_objoff) {
+		dout("Initial partial copy of %u bytes\n", src_objlen);
+
 		/*
 		 * we need to temporarily drop all caps as we'll be calling
 		 * {read,write}_iter, which will get caps again.
@@ -2080,8 +2384,9 @@ static ssize_t __ceph_copy_file_range(struct file *src_file, loff_t src_off,
 		put_rd_wr_caps(src_ci, src_got, dst_ci, dst_got);
 		ret = do_splice_direct(src_file, &src_off, dst_file,
 				       &dst_off, src_objlen, flags);
-		if (ret < 0) {
-			dout("do_splice_direct returned %d\n", err);
+		/* Abort on short copies or on error */
+		if (ret < src_objlen) {
+			dout("Failed partial copy (%zd)\n", ret);
 			goto out;
 		}
 		len -= ret;
@@ -2094,65 +2399,27 @@ static ssize_t __ceph_copy_file_range(struct file *src_file, loff_t src_off,
 		if (err < 0)
 			goto out_caps;
 	}
-	object_size = src_ci->i_layout.object_size;
-	while (len >= object_size) {
-		ceph_calc_file_object_mapping(&src_ci->i_layout, src_off,
-					      object_size, &src_objnum,
-					      &src_objoff, &src_objlen);
-		ceph_calc_file_object_mapping(&dst_ci->i_layout, dst_off,
-					      object_size, &dst_objnum,
-					      &dst_objoff, &dst_objlen);
-		ceph_oid_init(&src_oid);
-		ceph_oid_printf(&src_oid, "%llx.%08llx",
-				src_ci->i_vino.ino, src_objnum);
-		ceph_oid_init(&dst_oid);
-		ceph_oid_printf(&dst_oid, "%llx.%08llx",
-				dst_ci->i_vino.ino, dst_objnum);
-		/* Do an object remote copy */
-		err = ceph_osdc_copy_from(
-			&src_fsc->client->osdc,
-			src_ci->i_vino.snap, 0,
-			&src_oid, &src_oloc,
-			CEPH_OSD_OP_FLAG_FADVISE_SEQUENTIAL |
-			CEPH_OSD_OP_FLAG_FADVISE_NOCACHE,
-			&dst_oid, &dst_oloc,
-			CEPH_OSD_OP_FLAG_FADVISE_SEQUENTIAL |
-			CEPH_OSD_OP_FLAG_FADVISE_DONTNEED,
-			dst_ci->i_truncate_seq, dst_ci->i_truncate_size,
-			CEPH_OSD_COPY_FROM_FLAG_TRUNCATE_SEQ);
-		if (err) {
-			if (err == -EOPNOTSUPP) {
-				src_fsc->have_copy_from2 = false;
-				pr_notice("OSDs don't support copy-from2; disabling copy offload\n");
-			}
-			dout("ceph_osdc_copy_from returned %d\n", err);
-			if (!ret)
-				ret = err;
-			goto out_caps;
-		}
-		len -= object_size;
-		src_off += object_size;
-		dst_off += object_size;
-		ret += object_size;
-	}
 
-	if (len)
-		/* We still need one final local copy */
-		do_final_copy = true;
+	size = i_size_read(dst_inode);
+	bytes = ceph_do_objects_copy(src_ci, &src_off, dst_ci, &dst_off,
+				     src_fsc, len, flags);
+	if (bytes <= 0) {
+		if (!ret)
+			ret = bytes;
+		goto out_caps;
+	}
+	dout("Copied %zu bytes out of %zu\n", bytes, len);
+	len -= bytes;
+	ret += bytes;
 
 	file_update_time(dst_file);
 	inode_inc_iversion_raw(dst_inode);
 
-	if (endoff > size) {
-		int caps_flags = 0;
-
+	if (dst_off > size) {
 		/* Let the MDS know about dst file size change */
-		if (ceph_quota_is_max_bytes_approaching(dst_inode, endoff))
-			caps_flags |= CHECK_CAPS_NODELAY;
-		if (ceph_inode_set_size(dst_inode, endoff))
-			caps_flags |= CHECK_CAPS_AUTHONLY;
-		if (caps_flags)
-			ceph_check_caps(dst_ci, caps_flags, NULL);
+		if (ceph_inode_set_size(dst_inode, dst_off) ||
+		    ceph_quota_is_max_bytes_approaching(dst_inode, dst_off))
+			ceph_check_caps(dst_ci, CHECK_CAPS_AUTHONLY, NULL);
 	}
 	/* Mark Fw dirty */
 	spin_lock(&dst_ci->i_ceph_lock);
@@ -2165,15 +2432,18 @@ static ssize_t __ceph_copy_file_range(struct file *src_file, loff_t src_off,
 out_caps:
 	put_rd_wr_caps(src_ci, src_got, dst_ci, dst_got);
 
-	if (do_final_copy) {
-		err = do_splice_direct(src_file, &src_off, dst_file,
-				       &dst_off, len, flags);
-		if (err < 0) {
-			dout("do_splice_direct returned %d\n", err);
-			goto out;
-		}
-		len -= err;
-		ret += err;
+	/*
+	 * Do the final manual copy if we still have some bytes left, unless
+	 * there were errors in remote object copies (len >= object_size).
+	 */
+	if (len && (len < src_ci->i_layout.object_size)) {
+		dout("Final partial copy of %zu bytes\n", len);
+		bytes = do_splice_direct(src_file, &src_off, dst_file,
+					 &dst_off, len, flags);
+		if (bytes > 0)
+			ret += bytes;
+		else
+			dout("Failed partial copy (%zd)\n", bytes);
 	}
 
 out:
diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c
index d01710a..7fef94f 100644
--- a/fs/ceph/inode.c
+++ b/fs/ceph/inode.c
@@ -82,10 +82,14 @@ struct inode *ceph_get_snapdir(struct inode *parent)
 	inode->i_mode = parent->i_mode;
 	inode->i_uid = parent->i_uid;
 	inode->i_gid = parent->i_gid;
+	inode->i_mtime = parent->i_mtime;
+	inode->i_ctime = parent->i_ctime;
+	inode->i_atime = parent->i_atime;
 	inode->i_op = &ceph_snapdir_iops;
 	inode->i_fop = &ceph_snapdir_fops;
 	ci->i_snap_caps = CEPH_CAP_PIN; /* so we can open */
 	ci->i_rbytes = 0;
+	ci->i_btime = ceph_inode(parent)->i_btime;
 
 	if (inode->i_state & I_NEW)
 		unlock_new_inode(inode);
@@ -447,6 +451,7 @@ struct inode *ceph_alloc_inode(struct super_block *sb)
 	ci->i_max_files = 0;
 
 	memset(&ci->i_dir_layout, 0, sizeof(ci->i_dir_layout));
+	memset(&ci->i_cached_layout, 0, sizeof(ci->i_cached_layout));
 	RCU_INIT_POINTER(ci->i_layout.pool_ns, NULL);
 
 	ci->i_fragtree = RB_ROOT;
@@ -471,13 +476,13 @@ struct inode *ceph_alloc_inode(struct super_block *sb)
 	ci->i_prealloc_cap_flush = NULL;
 	INIT_LIST_HEAD(&ci->i_cap_flush_list);
 	init_waitqueue_head(&ci->i_cap_wq);
-	ci->i_hold_caps_min = 0;
 	ci->i_hold_caps_max = 0;
 	INIT_LIST_HEAD(&ci->i_cap_delay_list);
 	INIT_LIST_HEAD(&ci->i_cap_snaps);
 	ci->i_head_snapc = NULL;
 	ci->i_snap_caps = 0;
 
+	ci->i_last_rd = ci->i_last_wr = jiffies - 3600 * HZ;
 	for (i = 0; i < CEPH_FILE_MODE_BITS; i++)
 		ci->i_nr_by_mode[i] = 0;
 
@@ -496,6 +501,7 @@ struct inode *ceph_alloc_inode(struct super_block *sb)
 	ci->i_rdcache_ref = 0;
 	ci->i_wr_ref = 0;
 	ci->i_wb_ref = 0;
+	ci->i_fx_ref = 0;
 	ci->i_wrbuffer_ref = 0;
 	ci->i_wrbuffer_ref_head = 0;
 	atomic_set(&ci->i_filelock_ref, 0);
@@ -586,6 +592,7 @@ void ceph_evict_inode(struct inode *inode)
 		ceph_buffer_put(ci->i_xattrs.prealloc_blob);
 
 	ceph_put_string(rcu_dereference_raw(ci->i_layout.pool_ns));
+	ceph_put_string(rcu_dereference_raw(ci->i_cached_layout.pool_ns));
 }
 
 static inline blkcnt_t calc_inode_blocks(u64 size)
@@ -636,7 +643,7 @@ int ceph_fill_file_size(struct inode *inode, int issued,
 			if ((issued & (CEPH_CAP_FILE_CACHE|
 				       CEPH_CAP_FILE_BUFFER)) ||
 			    mapping_mapped(inode->i_mapping) ||
-			    __ceph_caps_file_wanted(ci)) {
+			    __ceph_is_file_opened(ci)) {
 				ci->i_truncate_pending++;
 				queue_trunc = 1;
 			}
@@ -727,11 +734,11 @@ void ceph_fill_file_time(struct inode *inode, int issued,
  * Populate an inode based on info from mds.  May be called on new or
  * existing inodes.
  */
-static int fill_inode(struct inode *inode, struct page *locked_page,
-		      struct ceph_mds_reply_info_in *iinfo,
-		      struct ceph_mds_reply_dirfrag *dirinfo,
-		      struct ceph_mds_session *session, int cap_fmode,
-		      struct ceph_cap_reservation *caps_reservation)
+int ceph_fill_inode(struct inode *inode, struct page *locked_page,
+		    struct ceph_mds_reply_info_in *iinfo,
+		    struct ceph_mds_reply_dirfrag *dirinfo,
+		    struct ceph_mds_session *session, int cap_fmode,
+		    struct ceph_cap_reservation *caps_reservation)
 {
 	struct ceph_mds_client *mdsc = ceph_inode_to_client(inode)->mdsc;
 	struct ceph_mds_reply_inode *info = iinfo->in;
@@ -748,7 +755,7 @@ static int fill_inode(struct inode *inode, struct page *locked_page,
 	bool new_version = false;
 	bool fill_inline = false;
 
-	dout("fill_inode %p ino %llx.%llx v %llu had %llu\n",
+	dout("%s %p ino %llx.%llx v %llu had %llu\n", __func__,
 	     inode, ceph_vinop(inode), le64_to_cpu(info->version),
 	     ci->i_version);
 
@@ -769,7 +776,7 @@ static int fill_inode(struct inode *inode, struct page *locked_page,
 	if (iinfo->xattr_len > 4) {
 		xattr_blob = ceph_buffer_new(iinfo->xattr_len, GFP_NOFS);
 		if (!xattr_blob)
-			pr_err("fill_inode ENOMEM xattr blob %d bytes\n",
+			pr_err("%s ENOMEM xattr blob %d bytes\n", __func__,
 			       iinfo->xattr_len);
 	}
 
@@ -932,8 +939,9 @@ static int fill_inode(struct inode *inode, struct page *locked_page,
 			spin_unlock(&ci->i_ceph_lock);
 
 			if (symlen != i_size_read(inode)) {
-				pr_err("fill_inode %llx.%llx BAD symlink "
-					"size %lld\n", ceph_vinop(inode),
+				pr_err("%s %llx.%llx BAD symlink "
+					"size %lld\n", __func__,
+					ceph_vinop(inode),
 					i_size_read(inode));
 				i_size_write(inode, symlen);
 				inode->i_blocks = calc_inode_blocks(symlen);
@@ -957,7 +965,7 @@ static int fill_inode(struct inode *inode, struct page *locked_page,
 		inode->i_fop = &ceph_dir_fops;
 		break;
 	default:
-		pr_err("fill_inode %llx.%llx BAD mode 0%o\n",
+		pr_err("%s %llx.%llx BAD mode 0%o\n", __func__,
 		       ceph_vinop(inode), inode->i_mode);
 	}
 
@@ -966,7 +974,7 @@ static int fill_inode(struct inode *inode, struct page *locked_page,
 		if (ceph_snap(inode) == CEPH_NOSNAP) {
 			ceph_add_cap(inode, session,
 				     le64_to_cpu(info->cap.cap_id),
-				     cap_fmode, info_caps,
+				     info_caps,
 				     le32_to_cpu(info->cap.wanted),
 				     le32_to_cpu(info->cap.seq),
 				     le32_to_cpu(info->cap.mseq),
@@ -991,13 +999,7 @@ static int fill_inode(struct inode *inode, struct page *locked_page,
 			dout(" %p got snap_caps %s\n", inode,
 			     ceph_cap_string(info_caps));
 			ci->i_snap_caps |= info_caps;
-			if (cap_fmode >= 0)
-				__ceph_get_fmode(ci, cap_fmode);
 		}
-	} else if (cap_fmode >= 0) {
-		pr_warn("mds issued no caps on %llx.%llx\n",
-			   ceph_vinop(inode));
-		__ceph_get_fmode(ci, cap_fmode);
 	}
 
 	if (iinfo->inline_version > 0 &&
@@ -1009,6 +1011,13 @@ static int fill_inode(struct inode *inode, struct page *locked_page,
 			fill_inline = true;
 	}
 
+	if (cap_fmode >= 0) {
+		if (!info_caps)
+			pr_warn("mds issued no caps on %llx.%llx\n",
+				ceph_vinop(inode));
+		__ceph_touch_fmode(ci, mdsc, cap_fmode);
+	}
+
 	spin_unlock(&ci->i_ceph_lock);
 
 	if (fill_inline)
@@ -1050,6 +1059,7 @@ static void __update_dentry_lease(struct inode *dir, struct dentry *dentry,
 				  struct ceph_mds_session **old_lease_session)
 {
 	struct ceph_dentry_info *di = ceph_dentry(dentry);
+	unsigned mask = le16_to_cpu(lease->mask);
 	long unsigned duration = le32_to_cpu(lease->duration_ms);
 	long unsigned ttl = from_time + (duration * HZ) / 1000;
 	long unsigned half_ttl = from_time + (duration * HZ / 2) / 1000;
@@ -1061,8 +1071,13 @@ static void __update_dentry_lease(struct inode *dir, struct dentry *dentry,
 	if (ceph_snap(dir) != CEPH_NOSNAP)
 		return;
 
+	if (mask & CEPH_LEASE_PRIMARY_LINK)
+		di->flags |= CEPH_DENTRY_PRIMARY_LINK;
+	else
+		di->flags &= ~CEPH_DENTRY_PRIMARY_LINK;
+
 	di->lease_shared_gen = atomic_read(&ceph_inode(dir)->i_shared_gen);
-	if (duration == 0) {
+	if (!(mask & CEPH_LEASE_VALID)) {
 		__ceph_dentry_dir_lease_touch(di);
 		return;
 	}
@@ -1239,10 +1254,9 @@ int ceph_fill_trace(struct super_block *sb, struct ceph_mds_request *req)
 		struct inode *dir = req->r_parent;
 
 		if (dir) {
-			err = fill_inode(dir, NULL,
-					 &rinfo->diri, rinfo->dirfrag,
-					 session, -1,
-					 &req->r_caps_reservation);
+			err = ceph_fill_inode(dir, NULL, &rinfo->diri,
+					      rinfo->dirfrag, session, -1,
+					      &req->r_caps_reservation);
 			if (err < 0)
 				goto done;
 		} else {
@@ -1307,13 +1321,14 @@ int ceph_fill_trace(struct super_block *sb, struct ceph_mds_request *req)
 			goto done;
 		}
 
-		err = fill_inode(in, req->r_locked_page, &rinfo->targeti, NULL,
-				session,
+		err = ceph_fill_inode(in, req->r_locked_page, &rinfo->targeti,
+				NULL, session,
 				(!test_bit(CEPH_MDS_R_ABORTED, &req->r_req_flags) &&
+				 !test_bit(CEPH_MDS_R_ASYNC, &req->r_req_flags) &&
 				 rinfo->head->result == 0) ?  req->r_fmode : -1,
 				&req->r_caps_reservation);
 		if (err < 0) {
-			pr_err("fill_inode badness %p %llx.%llx\n",
+			pr_err("ceph_fill_inode badness %p %llx.%llx\n",
 				in, ceph_vinop(in));
 			if (in->i_state & I_NEW)
 				discard_new_inode(in);
@@ -1500,10 +1515,11 @@ static int readdir_prepopulate_inodes_only(struct ceph_mds_request *req,
 			dout("new_inode badness got %d\n", err);
 			continue;
 		}
-		rc = fill_inode(in, NULL, &rde->inode, NULL, session,
-				-1, &req->r_caps_reservation);
+		rc = ceph_fill_inode(in, NULL, &rde->inode, NULL, session,
+				     -1, &req->r_caps_reservation);
 		if (rc < 0) {
-			pr_err("fill_inode badness on %p got %d\n", in, rc);
+			pr_err("ceph_fill_inode badness on %p got %d\n",
+			       in, rc);
 			err = rc;
 			if (in->i_state & I_NEW) {
 				ihold(in);
@@ -1707,10 +1723,10 @@ int ceph_readdir_prepopulate(struct ceph_mds_request *req,
 			}
 		}
 
-		ret = fill_inode(in, NULL, &rde->inode, NULL, session,
-				 -1, &req->r_caps_reservation);
+		ret = ceph_fill_inode(in, NULL, &rde->inode, NULL, session,
+				      -1, &req->r_caps_reservation);
 		if (ret < 0) {
-			pr_err("fill_inode badness on %p\n", in);
+			pr_err("ceph_fill_inode badness on %p\n", in);
 			if (d_really_is_negative(dn)) {
 				/* avoid calling iput_final() in mds
 				 * dispatch threads */
@@ -1972,7 +1988,7 @@ void __ceph_do_pending_vmtruncate(struct inode *inode)
 	mutex_unlock(&ci->i_truncate_mutex);
 
 	if (wrbuffer_refs == 0)
-		ceph_check_caps(ci, CHECK_CAPS_AUTHONLY, NULL);
+		ceph_check_caps(ci, 0, NULL);
 
 	wake_up_all(&ci->i_cap_wq);
 }
diff --git a/fs/ceph/ioctl.c b/fs/ceph/ioctl.c
index c90f03b..6e061bf 100644
--- a/fs/ceph/ioctl.c
+++ b/fs/ceph/ioctl.c
@@ -243,11 +243,13 @@ static long ceph_ioctl_lazyio(struct file *file)
 	struct ceph_file_info *fi = file->private_data;
 	struct inode *inode = file_inode(file);
 	struct ceph_inode_info *ci = ceph_inode(inode);
+	struct ceph_mds_client *mdsc = ceph_inode_to_client(inode)->mdsc;
 
 	if ((fi->fmode & CEPH_FILE_MODE_LAZY) == 0) {
 		spin_lock(&ci->i_ceph_lock);
 		fi->fmode |= CEPH_FILE_MODE_LAZY;
 		ci->i_nr_by_mode[ffs(CEPH_FILE_MODE_LAZY)]++;
+		__ceph_touch_fmode(ci, mdsc, fi->fmode);
 		spin_unlock(&ci->i_ceph_lock);
 		dout("ioctl_layzio: file %p marked lazy\n", file);
 
diff --git a/fs/ceph/locks.c b/fs/ceph/locks.c
index 544e9e8..d6b9166 100644
--- a/fs/ceph/locks.c
+++ b/fs/ceph/locks.c
@@ -210,6 +210,21 @@ static int ceph_lock_wait_for_completion(struct ceph_mds_client *mdsc,
 	return 0;
 }
 
+static int try_unlock_file(struct file *file, struct file_lock *fl)
+{
+	int err;
+	unsigned int orig_flags = fl->fl_flags;
+	fl->fl_flags |= FL_EXISTS;
+	err = locks_lock_file_wait(file, fl);
+	fl->fl_flags = orig_flags;
+	if (err == -ENOENT) {
+		if (!(orig_flags & FL_EXISTS))
+			err = 0;
+		return err;
+	}
+	return 1;
+}
+
 /**
  * Attempt to set an fcntl lock.
  * For now, this just goes away to the server. Later it may be more awesome.
@@ -255,9 +270,15 @@ int ceph_lock(struct file *file, int cmd, struct file_lock *fl)
 	else
 		lock_cmd = CEPH_LOCK_UNLOCK;
 
+	if (op == CEPH_MDS_OP_SETFILELOCK && F_UNLCK == fl->fl_type) {
+		err = try_unlock_file(file, fl);
+		if (err <= 0)
+			return err;
+	}
+
 	err = ceph_lock_message(CEPH_LOCK_FCNTL, op, inode, lock_cmd, wait, fl);
 	if (!err) {
-		if (op == CEPH_MDS_OP_SETFILELOCK) {
+		if (op == CEPH_MDS_OP_SETFILELOCK && F_UNLCK != fl->fl_type) {
 			dout("mds locked, locking locally\n");
 			err = posix_lock_file(file, fl, NULL);
 			if (err) {
@@ -311,9 +332,15 @@ int ceph_flock(struct file *file, int cmd, struct file_lock *fl)
 	else
 		lock_cmd = CEPH_LOCK_UNLOCK;
 
+	if (F_UNLCK == fl->fl_type) {
+		err = try_unlock_file(file, fl);
+		if (err <= 0)
+			return err;
+	}
+
 	err = ceph_lock_message(CEPH_LOCK_FLOCK, CEPH_MDS_OP_SETFILELOCK,
 				inode, lock_cmd, wait, fl);
-	if (!err) {
+	if (!err && F_UNLCK != fl->fl_type) {
 		err = locks_lock_file_wait(file, fl);
 		if (err) {
 			ceph_lock_message(CEPH_LOCK_FLOCK,
diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c
index bbbbddf7..486f91f 100644
--- a/fs/ceph/mds_client.c
+++ b/fs/ceph/mds_client.c
@@ -415,21 +415,121 @@ static int parse_reply_info_filelock(void **p, void *end,
 	return -EIO;
 }
 
+
+#if BITS_PER_LONG == 64
+
+#define DELEGATED_INO_AVAILABLE		xa_mk_value(1)
+
+static int ceph_parse_deleg_inos(void **p, void *end,
+				 struct ceph_mds_session *s)
+{
+	u32 sets;
+
+	ceph_decode_32_safe(p, end, sets, bad);
+	dout("got %u sets of delegated inodes\n", sets);
+	while (sets--) {
+		u64 start, len, ino;
+
+		ceph_decode_64_safe(p, end, start, bad);
+		ceph_decode_64_safe(p, end, len, bad);
+		while (len--) {
+			int err = xa_insert(&s->s_delegated_inos, ino = start++,
+					    DELEGATED_INO_AVAILABLE,
+					    GFP_KERNEL);
+			if (!err) {
+				dout("added delegated inode 0x%llx\n",
+				     start - 1);
+			} else if (err == -EBUSY) {
+				pr_warn("ceph: MDS delegated inode 0x%llx more than once.\n",
+					start - 1);
+			} else {
+				return err;
+			}
+		}
+	}
+	return 0;
+bad:
+	return -EIO;
+}
+
+u64 ceph_get_deleg_ino(struct ceph_mds_session *s)
+{
+	unsigned long ino;
+	void *val;
+
+	xa_for_each(&s->s_delegated_inos, ino, val) {
+		val = xa_erase(&s->s_delegated_inos, ino);
+		if (val == DELEGATED_INO_AVAILABLE)
+			return ino;
+	}
+	return 0;
+}
+
+int ceph_restore_deleg_ino(struct ceph_mds_session *s, u64 ino)
+{
+	return xa_insert(&s->s_delegated_inos, ino, DELEGATED_INO_AVAILABLE,
+			 GFP_KERNEL);
+}
+#else /* BITS_PER_LONG == 64 */
+/*
+ * FIXME: xarrays can't handle 64-bit indexes on a 32-bit arch. For now, just
+ * ignore delegated_inos on 32 bit arch. Maybe eventually add xarrays for top
+ * and bottom words?
+ */
+static int ceph_parse_deleg_inos(void **p, void *end,
+				 struct ceph_mds_session *s)
+{
+	u32 sets;
+
+	ceph_decode_32_safe(p, end, sets, bad);
+	if (sets)
+		ceph_decode_skip_n(p, end, sets * 2 * sizeof(__le64), bad);
+	return 0;
+bad:
+	return -EIO;
+}
+
+u64 ceph_get_deleg_ino(struct ceph_mds_session *s)
+{
+	return 0;
+}
+
+int ceph_restore_deleg_ino(struct ceph_mds_session *s, u64 ino)
+{
+	return 0;
+}
+#endif /* BITS_PER_LONG == 64 */
+
 /*
  * parse create results
  */
 static int parse_reply_info_create(void **p, void *end,
 				  struct ceph_mds_reply_info_parsed *info,
-				  u64 features)
+				  u64 features, struct ceph_mds_session *s)
 {
+	int ret;
+
 	if (features == (u64)-1 ||
 	    (features & CEPH_FEATURE_REPLY_CREATE_INODE)) {
-		/* Malformed reply? */
 		if (*p == end) {
+			/* Malformed reply? */
 			info->has_create_ino = false;
-		} else {
+		} else if (test_bit(CEPHFS_FEATURE_DELEG_INO, &s->s_features)) {
+			u8 struct_v, struct_compat;
+			u32 len;
+
 			info->has_create_ino = true;
+			ceph_decode_8_safe(p, end, struct_v, bad);
+			ceph_decode_8_safe(p, end, struct_compat, bad);
+			ceph_decode_32_safe(p, end, len, bad);
 			ceph_decode_64_safe(p, end, info->ino, bad);
+			ret = ceph_parse_deleg_inos(p, end, s);
+			if (ret)
+				return ret;
+		} else {
+			/* legacy */
+			ceph_decode_64_safe(p, end, info->ino, bad);
+			info->has_create_ino = true;
 		}
 	} else {
 		if (*p != end)
@@ -448,7 +548,7 @@ static int parse_reply_info_create(void **p, void *end,
  */
 static int parse_reply_info_extra(void **p, void *end,
 				  struct ceph_mds_reply_info_parsed *info,
-				  u64 features)
+				  u64 features, struct ceph_mds_session *s)
 {
 	u32 op = le32_to_cpu(info->head->op);
 
@@ -457,7 +557,7 @@ static int parse_reply_info_extra(void **p, void *end,
 	else if (op == CEPH_MDS_OP_READDIR || op == CEPH_MDS_OP_LSSNAP)
 		return parse_reply_info_readdir(p, end, info, features);
 	else if (op == CEPH_MDS_OP_CREATE)
-		return parse_reply_info_create(p, end, info, features);
+		return parse_reply_info_create(p, end, info, features, s);
 	else
 		return -EIO;
 }
@@ -465,7 +565,7 @@ static int parse_reply_info_extra(void **p, void *end,
 /*
  * parse entire mds reply
  */
-static int parse_reply_info(struct ceph_msg *msg,
+static int parse_reply_info(struct ceph_mds_session *s, struct ceph_msg *msg,
 			    struct ceph_mds_reply_info_parsed *info,
 			    u64 features)
 {
@@ -490,7 +590,7 @@ static int parse_reply_info(struct ceph_msg *msg,
 	ceph_decode_32_safe(&p, end, len, bad);
 	if (len > 0) {
 		ceph_decode_need(&p, end, len, bad);
-		err = parse_reply_info_extra(&p, p+len, info, features);
+		err = parse_reply_info_extra(&p, p+len, info, features, s);
 		if (err < 0)
 			goto out_bad;
 	}
@@ -558,6 +658,7 @@ void ceph_put_mds_session(struct ceph_mds_session *s)
 	if (refcount_dec_and_test(&s->s_ref)) {
 		if (s->s_auth.authorizer)
 			ceph_auth_destroy_authorizer(s->s_auth.authorizer);
+		xa_destroy(&s->s_delegated_inos);
 		kfree(s);
 	}
 }
@@ -645,6 +746,7 @@ static struct ceph_mds_session *register_session(struct ceph_mds_client *mdsc,
 	refcount_set(&s->s_ref, 1);
 	INIT_LIST_HEAD(&s->s_waiting);
 	INIT_LIST_HEAD(&s->s_unsafe);
+	xa_init(&s->s_delegated_inos);
 	s->s_num_cap_releases = 0;
 	s->s_cap_reconnect = 0;
 	s->s_cap_iterator = NULL;
@@ -699,6 +801,7 @@ void ceph_mdsc_release_request(struct kref *kref)
 	struct ceph_mds_request *req = container_of(kref,
 						    struct ceph_mds_request,
 						    r_kref);
+	ceph_mdsc_release_dir_caps(req);
 	destroy_reply_info(&req->r_reply_info);
 	if (req->r_request)
 		ceph_msg_put(req->r_request);
@@ -736,7 +839,7 @@ void ceph_mdsc_release_request(struct kref *kref)
 	put_request_session(req);
 	ceph_unreserve_caps(req->r_mdsc, &req->r_caps_reservation);
 	WARN_ON_ONCE(!list_empty(&req->r_wait));
-	kfree(req);
+	kmem_cache_free(ceph_mds_request_cachep, req);
 }
 
 DEFINE_RB_FUNCS(request, struct ceph_mds_request, r_tid, r_node)
@@ -793,8 +896,13 @@ static void __register_request(struct ceph_mds_client *mdsc,
 		mdsc->oldest_tid = req->r_tid;
 
 	if (dir) {
+		struct ceph_inode_info *ci = ceph_inode(dir);
+
 		ihold(dir);
 		req->r_unsafe_dir = dir;
+		spin_lock(&ci->i_unsafe_lock);
+		list_add_tail(&req->r_unsafe_dir_item, &ci->i_unsafe_dirops);
+		spin_unlock(&ci->i_unsafe_lock);
 	}
 }
 
@@ -822,8 +930,7 @@ static void __unregister_request(struct ceph_mds_client *mdsc,
 
 	erase_request(&mdsc->request_tree, req);
 
-	if (req->r_unsafe_dir  &&
-	    test_bit(CEPH_MDS_R_GOT_UNSAFE, &req->r_req_flags)) {
+	if (req->r_unsafe_dir) {
 		struct ceph_inode_info *ci = ceph_inode(req->r_unsafe_dir);
 		spin_lock(&ci->i_unsafe_lock);
 		list_del_init(&req->r_unsafe_dir_item);
@@ -1407,8 +1514,6 @@ static int remove_session_caps_cb(struct inode *inode, struct ceph_cap *cap,
 	dout("removing cap %p, ci is %p, inode is %p\n",
 	     cap, ci, &ci->vfs_inode);
 	spin_lock(&ci->i_ceph_lock);
-	if (cap->mds_wanted | cap->issued)
-		ci->i_ceph_flags |= CEPH_I_CAP_DROPPED;
 	__ceph_remove_cap(cap, false);
 	if (!ci->i_auth_cap) {
 		struct ceph_cap_flush *cf;
@@ -1574,9 +1679,6 @@ static int wake_up_session_cb(struct inode *inode, struct ceph_cap *cap,
 			/* mds did not re-issue stale cap */
 			spin_lock(&ci->i_ceph_lock);
 			cap->issued = cap->implemented = CEPH_CAP_PIN;
-			/* make sure mds knows what we want */
-			if (__ceph_caps_file_wanted(ci) & ~cap->mds_wanted)
-				ci->i_ceph_flags |= CEPH_I_CAP_DROPPED;
 			spin_unlock(&ci->i_ceph_lock);
 		}
 	} else if (ev == FORCE_RO) {
@@ -1772,7 +1874,8 @@ static int trim_caps_cb(struct inode *inode, struct ceph_cap *cap, void *arg)
 	}
 	/* The inode has cached pages, but it's no longer used.
 	 * we can safely drop it */
-	if (wanted == 0 && used == CEPH_CAP_FILE_CACHE &&
+	if (S_ISREG(inode->i_mode) &&
+	    wanted == 0 && used == CEPH_CAP_FILE_CACHE &&
 	    !(oissued & CEPH_CAP_FILE_CACHE)) {
 	  used = 0;
 	  oissued = 0;
@@ -2089,8 +2192,9 @@ int ceph_alloc_readdir_reply_buffer(struct ceph_mds_request *req,
 struct ceph_mds_request *
 ceph_mdsc_create_request(struct ceph_mds_client *mdsc, int op, int mode)
 {
-	struct ceph_mds_request *req = kzalloc(sizeof(*req), GFP_NOFS);
+	struct ceph_mds_request *req;
 
+	req = kmem_cache_zalloc(ceph_mds_request_cachep, GFP_NOFS);
 	if (!req)
 		return ERR_PTR(-ENOMEM);
 
@@ -2368,7 +2472,7 @@ static struct ceph_msg *create_request_message(struct ceph_mds_client *mdsc,
 	head->op = cpu_to_le32(req->r_op);
 	head->caller_uid = cpu_to_le32(from_kuid(&init_user_ns, req->r_uid));
 	head->caller_gid = cpu_to_le32(from_kgid(&init_user_ns, req->r_gid));
-	head->ino = 0;
+	head->ino = cpu_to_le64(req->r_deleg_ino);
 	head->args = req->r_args;
 
 	ceph_encode_filepath(&p, end, ino1, path1);
@@ -2382,7 +2486,8 @@ static struct ceph_msg *create_request_message(struct ceph_mds_client *mdsc,
 	if (req->r_inode_drop)
 		releases += ceph_encode_inode_release(&p,
 		      req->r_inode ? req->r_inode : d_inode(req->r_dentry),
-		      mds, req->r_inode_drop, req->r_inode_unless, 0);
+		      mds, req->r_inode_drop, req->r_inode_unless,
+		      req->r_op == CEPH_MDS_OP_READDIR);
 	if (req->r_dentry_drop)
 		releases += ceph_encode_dentry_release(&p, req->r_dentry,
 				req->r_parent, mds, req->r_dentry_drop,
@@ -2522,12 +2627,13 @@ static int __prepare_send_request(struct ceph_mds_client *mdsc,
 	rhead->oldest_client_tid = cpu_to_le64(__get_oldest_tid(mdsc));
 	if (test_bit(CEPH_MDS_R_GOT_UNSAFE, &req->r_req_flags))
 		flags |= CEPH_MDS_FLAG_REPLAY;
+	if (test_bit(CEPH_MDS_R_ASYNC, &req->r_req_flags))
+		flags |= CEPH_MDS_FLAG_ASYNC;
 	if (req->r_parent)
 		flags |= CEPH_MDS_FLAG_WANT_DENTRY;
 	rhead->flags = cpu_to_le32(flags);
 	rhead->num_fwd = req->r_num_fwd;
 	rhead->num_retry = req->r_attempts - 1;
-	rhead->ino = 0;
 
 	dout(" r_parent = %p\n", req->r_parent);
 	return 0;
@@ -2573,7 +2679,7 @@ static void __do_request(struct ceph_mds_client *mdsc,
 	if (req->r_timeout &&
 	    time_after_eq(jiffies, req->r_started + req->r_timeout)) {
 		dout("do_request timed out\n");
-		err = -EIO;
+		err = -ETIMEDOUT;
 		goto finish;
 	}
 	if (READ_ONCE(mdsc->fsc->mount_state) == CEPH_MOUNT_SHUTDOWN) {
@@ -2605,6 +2711,10 @@ static void __do_request(struct ceph_mds_client *mdsc,
 	mds = __choose_mds(mdsc, req, &random);
 	if (mds < 0 ||
 	    ceph_mdsmap_get_state(mdsc->mdsmap, mds) < CEPH_MDS_STATE_ACTIVE) {
+		if (test_bit(CEPH_MDS_R_ASYNC, &req->r_req_flags)) {
+			err = -EJUKEBOX;
+			goto finish;
+		}
 		dout("do_request no mds or not active, waiting for map\n");
 		list_add(&req->r_wait, &mdsc->waiting_for_map);
 		return;
@@ -2629,6 +2739,15 @@ static void __do_request(struct ceph_mds_client *mdsc,
 			err = -EACCES;
 			goto out_session;
 		}
+		/*
+		 * We cannot queue async requests since the caps and delegated
+		 * inodes are bound to the session. Just return -EJUKEBOX and
+		 * let the caller retry a sync request in that case.
+		 */
+		if (test_bit(CEPH_MDS_R_ASYNC, &req->r_req_flags)) {
+			err = -EJUKEBOX;
+			goto out_session;
+		}
 		if (session->s_state == CEPH_MDS_SESSION_NEW ||
 		    session->s_state == CEPH_MDS_SESSION_CLOSING) {
 			__open_session(mdsc, session);
@@ -2709,19 +2828,43 @@ static void kick_requests(struct ceph_mds_client *mdsc, int mds)
 int ceph_mdsc_submit_request(struct ceph_mds_client *mdsc, struct inode *dir,
 			      struct ceph_mds_request *req)
 {
-	int err;
+	int err = 0;
 
 	/* take CAP_PIN refs for r_inode, r_parent, r_old_dentry */
 	if (req->r_inode)
 		ceph_get_cap_refs(ceph_inode(req->r_inode), CEPH_CAP_PIN);
 	if (req->r_parent) {
-		ceph_get_cap_refs(ceph_inode(req->r_parent), CEPH_CAP_PIN);
+		struct ceph_inode_info *ci = ceph_inode(req->r_parent);
+		int fmode = (req->r_op & CEPH_MDS_OP_WRITE) ?
+			    CEPH_FILE_MODE_WR : CEPH_FILE_MODE_RD;
+		spin_lock(&ci->i_ceph_lock);
+		ceph_take_cap_refs(ci, CEPH_CAP_PIN, false);
+		__ceph_touch_fmode(ci, mdsc, fmode);
+		spin_unlock(&ci->i_ceph_lock);
 		ihold(req->r_parent);
 	}
 	if (req->r_old_dentry_dir)
 		ceph_get_cap_refs(ceph_inode(req->r_old_dentry_dir),
 				  CEPH_CAP_PIN);
 
+	if (req->r_inode) {
+		err = ceph_wait_on_async_create(req->r_inode);
+		if (err) {
+			dout("%s: wait for async create returned: %d\n",
+			     __func__, err);
+			return err;
+		}
+	}
+
+	if (!err && req->r_old_inode) {
+		err = ceph_wait_on_async_create(req->r_old_inode);
+		if (err) {
+			dout("%s: wait for async create returned: %d\n",
+			     __func__, err);
+			return err;
+		}
+	}
+
 	dout("submit_request on %p for inode %p\n", req, dir);
 	mutex_lock(&mdsc->mutex);
 	__register_request(mdsc, req, dir);
@@ -2747,7 +2890,7 @@ static int ceph_mdsc_wait_request(struct ceph_mds_client *mdsc,
 		if (timeleft > 0)
 			err = 0;
 		else if (!timeleft)
-			err = -EIO;  /* timed out */
+			err = -ETIMEDOUT;  /* timed out */
 		else
 			err = timeleft;  /* killed */
 	}
@@ -2935,22 +3078,14 @@ static void handle_reply(struct ceph_mds_session *session, struct ceph_msg *msg)
 	} else {
 		set_bit(CEPH_MDS_R_GOT_UNSAFE, &req->r_req_flags);
 		list_add_tail(&req->r_unsafe_item, &req->r_session->s_unsafe);
-		if (req->r_unsafe_dir) {
-			struct ceph_inode_info *ci =
-					ceph_inode(req->r_unsafe_dir);
-			spin_lock(&ci->i_unsafe_lock);
-			list_add_tail(&req->r_unsafe_dir_item,
-				      &ci->i_unsafe_dirops);
-			spin_unlock(&ci->i_unsafe_lock);
-		}
 	}
 
 	dout("handle_reply tid %lld result %d\n", tid, result);
 	rinfo = &req->r_reply_info;
 	if (test_bit(CEPHFS_FEATURE_REPLY_ENCODING, &session->s_features))
-		err = parse_reply_info(msg, rinfo, (u64)-1);
+		err = parse_reply_info(session, msg, rinfo, (u64)-1);
 	else
-		err = parse_reply_info(msg, rinfo, session->s_con.peer_features);
+		err = parse_reply_info(session, msg, rinfo, session->s_con.peer_features);
 	mutex_unlock(&mdsc->mutex);
 
 	mutex_lock(&session->s_mutex);
@@ -3249,6 +3384,17 @@ static void handle_session(struct ceph_mds_session *session,
 	return;
 }
 
+void ceph_mdsc_release_dir_caps(struct ceph_mds_request *req)
+{
+	int dcaps;
+
+	dcaps = xchg(&req->r_dir_caps, 0);
+	if (dcaps) {
+		dout("releasing r_dir_caps=%s\n", ceph_cap_string(dcaps));
+		ceph_put_cap_refs(ceph_inode(req->r_parent), dcaps);
+	}
+}
+
 /*
  * called under session->mutex.
  */
@@ -3276,9 +3422,14 @@ static void replay_unsafe_requests(struct ceph_mds_client *mdsc,
 			continue;
 		if (req->r_attempts == 0)
 			continue; /* only old requests */
-		if (req->r_session &&
-		    req->r_session->s_mds == session->s_mds)
-			__send_request(mdsc, session, req, true);
+		if (!req->r_session)
+			continue;
+		if (req->r_session->s_mds != session->s_mds)
+			continue;
+
+		ceph_mdsc_release_dir_caps(req);
+
+		__send_request(mdsc, session, req, true);
 	}
 	mutex_unlock(&mdsc->mutex);
 }
@@ -3362,7 +3513,7 @@ static int send_reconnect_partial(struct ceph_reconnect_state *recon_state)
 /*
  * Encode information about a cap for a reconnect with the MDS.
  */
-static int encode_caps_cb(struct inode *inode, struct ceph_cap *cap,
+static int reconnect_caps_cb(struct inode *inode, struct ceph_cap *cap,
 			  void *arg)
 {
 	union {
@@ -3385,6 +3536,15 @@ static int encode_caps_cb(struct inode *inode, struct ceph_cap *cap,
 	cap->mseq = 0;       /* and migrate_seq */
 	cap->cap_gen = cap->session->s_cap_gen;
 
+	/* These are lost when the session goes away */
+	if (S_ISDIR(inode->i_mode)) {
+		if (cap->issued & CEPH_CAP_DIR_CREATE) {
+			ceph_put_string(rcu_dereference_raw(ci->i_cached_layout.pool_ns));
+			memset(&ci->i_cached_layout, 0, sizeof(ci->i_cached_layout));
+		}
+		cap->issued &= ~CEPH_CAP_ANY_DIR_OPS;
+	}
+
 	if (recon_state->msg_version >= 2) {
 		rec.v2.cap_id = cpu_to_le64(cap->cap_id);
 		rec.v2.wanted = cpu_to_le32(__ceph_caps_wanted(ci));
@@ -3626,6 +3786,8 @@ static void send_mds_reconnect(struct ceph_mds_client *mdsc,
 	if (!reply)
 		goto fail_nomsg;
 
+	xa_destroy(&session->s_delegated_inos);
+
 	mutex_lock(&session->s_mutex);
 	session->s_state = CEPH_MDS_SESSION_RECONNECTING;
 	session->s_seq = 0;
@@ -3681,7 +3843,7 @@ static void send_mds_reconnect(struct ceph_mds_client *mdsc,
 		recon_state.msg_version = 2;
 	}
 	/* trsaverse this session's caps */
-	err = ceph_iterate_session_caps(session, encode_caps_cb, &recon_state);
+	err = ceph_iterate_session_caps(session, reconnect_caps_cb, &recon_state);
 
 	spin_lock(&session->s_cap_lock);
 	session->s_cap_reconnect = 0;
diff --git a/fs/ceph/mds_client.h b/fs/ceph/mds_client.h
index 27a7446..903d9ed 100644
--- a/fs/ceph/mds_client.h
+++ b/fs/ceph/mds_client.h
@@ -23,8 +23,9 @@ enum ceph_feature_type {
 	CEPHFS_FEATURE_RECLAIM_CLIENT,
 	CEPHFS_FEATURE_LAZY_CAP_WANTED,
 	CEPHFS_FEATURE_MULTI_RECONNECT,
+	CEPHFS_FEATURE_DELEG_INO,
 
-	CEPHFS_FEATURE_MAX = CEPHFS_FEATURE_MULTI_RECONNECT,
+	CEPHFS_FEATURE_MAX = CEPHFS_FEATURE_DELEG_INO,
 };
 
 /*
@@ -37,6 +38,7 @@ enum ceph_feature_type {
 	CEPHFS_FEATURE_REPLY_ENCODING,		\
 	CEPHFS_FEATURE_LAZY_CAP_WANTED,		\
 	CEPHFS_FEATURE_MULTI_RECONNECT,		\
+	CEPHFS_FEATURE_DELEG_INO,		\
 						\
 	CEPHFS_FEATURE_MAX,			\
 }
@@ -201,6 +203,7 @@ struct ceph_mds_session {
 
 	struct list_head  s_waiting;  /* waiting requests */
 	struct list_head  s_unsafe;   /* unsafe requests */
+	struct xarray	  s_delegated_inos;
 };
 
 /*
@@ -255,6 +258,7 @@ struct ceph_mds_request {
 #define CEPH_MDS_R_GOT_RESULT		(5) /* got a result */
 #define CEPH_MDS_R_DID_PREPOPULATE	(6) /* prepopulated readdir */
 #define CEPH_MDS_R_PARENT_LOCKED	(7) /* is r_parent->i_rwsem wlocked? */
+#define CEPH_MDS_R_ASYNC		(8) /* async request */
 	unsigned long	r_req_flags;
 
 	struct mutex r_fill_mutex;
@@ -263,6 +267,7 @@ struct ceph_mds_request {
 	int r_fmode;        /* file mode, if expecting cap */
 	kuid_t r_uid;
 	kgid_t r_gid;
+	int r_request_release_offset;
 	struct timespec64 r_stamp;
 
 	/* for choosing which mds to send this request to */
@@ -280,12 +285,16 @@ struct ceph_mds_request {
 	int r_old_inode_drop, r_old_inode_unless;
 
 	struct ceph_msg  *r_request;  /* original request */
-	int r_request_release_offset;
 	struct ceph_msg  *r_reply;
 	struct ceph_mds_reply_info_parsed r_reply_info;
-	struct page *r_locked_page;
 	int r_err;
 
+
+	struct page *r_locked_page;
+	int r_dir_caps;
+	int r_num_caps;
+	u32               r_readdir_offset;
+
 	unsigned long r_timeout;  /* optional.  jiffies, 0 is "wait forever" */
 	unsigned long r_started;  /* start time to measure timeout against */
 	unsigned long r_request_started; /* start time for mds request only,
@@ -304,6 +313,7 @@ struct ceph_mds_request {
 	int               r_num_fwd;    /* number of forward attempts */
 	int               r_resend_mds; /* mds to resend to next, if any*/
 	u32               r_sent_on_mseq; /* cap mseq request was sent at*/
+	u64		  r_deleg_ino;
 
 	struct list_head  r_wait;
 	struct completion r_completion;
@@ -315,10 +325,8 @@ struct ceph_mds_request {
 	long long	  r_dir_release_cnt;
 	long long	  r_dir_ordered_cnt;
 	int		  r_readdir_cache_idx;
-	u32               r_readdir_offset;
 
 	struct ceph_cap_reservation r_caps_reservation;
-	int r_num_caps;
 };
 
 struct ceph_pool_perm {
@@ -488,6 +496,7 @@ extern int ceph_mdsc_submit_request(struct ceph_mds_client *mdsc,
 extern int ceph_mdsc_do_request(struct ceph_mds_client *mdsc,
 				struct inode *dir,
 				struct ceph_mds_request *req);
+extern void ceph_mdsc_release_dir_caps(struct ceph_mds_request *req);
 static inline void ceph_mdsc_get_request(struct ceph_mds_request *req)
 {
 	kref_get(&req->r_kref);
@@ -512,7 +521,7 @@ extern void ceph_mdsc_pre_umount(struct ceph_mds_client *mdsc);
 
 static inline void ceph_mdsc_free_path(char *path, int len)
 {
-	if (path)
+	if (!IS_ERR_OR_NULL(path))
 		__putname(path - (PATH_MAX - 1 - len));
 }
 
@@ -537,4 +546,15 @@ extern void ceph_mdsc_open_export_target_sessions(struct ceph_mds_client *mdsc,
 extern int ceph_trim_caps(struct ceph_mds_client *mdsc,
 			  struct ceph_mds_session *session,
 			  int max_caps);
+
+static inline int ceph_wait_on_async_create(struct inode *inode)
+{
+	struct ceph_inode_info *ci = ceph_inode(inode);
+
+	return wait_on_bit(&ci->i_ceph_flags, CEPH_ASYNC_CREATE_BIT,
+			   TASK_INTERRUPTIBLE);
+}
+
+extern u64 ceph_get_deleg_ino(struct ceph_mds_session *session);
+extern int ceph_restore_deleg_ino(struct ceph_mds_session *session, u64 ino);
 #endif
diff --git a/fs/ceph/super.c b/fs/ceph/super.c
index c7f1506..c9784eb1 100644
--- a/fs/ceph/super.c
+++ b/fs/ceph/super.c
@@ -155,6 +155,7 @@ enum {
 	Opt_acl,
 	Opt_quotadf,
 	Opt_copyfrom,
+	Opt_wsync,
 };
 
 enum ceph_recover_session_mode {
@@ -194,6 +195,7 @@ static const struct fs_parameter_spec ceph_mount_parameters[] = {
 	fsparam_string	("snapdirname",			Opt_snapdirname),
 	fsparam_string	("source",			Opt_source),
 	fsparam_u32	("wsize",			Opt_wsize),
+	fsparam_flag_no	("wsync",			Opt_wsync),
 	{}
 };
 
@@ -444,6 +446,12 @@ static int ceph_parse_mount_param(struct fs_context *fc,
 			fc->sb_flags &= ~SB_POSIXACL;
 		}
 		break;
+	case Opt_wsync:
+		if (!result.negated)
+			fsopt->flags &= ~CEPH_MOUNT_OPT_ASYNC_DIROPS;
+		else
+			fsopt->flags |= CEPH_MOUNT_OPT_ASYNC_DIROPS;
+		break;
 	default:
 		BUG();
 	}
@@ -567,6 +575,9 @@ static int ceph_show_options(struct seq_file *m, struct dentry *root)
 	if (fsopt->flags & CEPH_MOUNT_OPT_CLEANRECOVER)
 		seq_show_option(m, "recover_session", "clean");
 
+	if (fsopt->flags & CEPH_MOUNT_OPT_ASYNC_DIROPS)
+		seq_puts(m, ",nowsync");
+
 	if (fsopt->wsize != CEPH_MAX_WRITE_SIZE)
 		seq_printf(m, ",wsize=%u", fsopt->wsize);
 	if (fsopt->rsize != CEPH_MAX_READ_SIZE)
@@ -729,6 +740,7 @@ struct kmem_cache *ceph_cap_flush_cachep;
 struct kmem_cache *ceph_dentry_cachep;
 struct kmem_cache *ceph_file_cachep;
 struct kmem_cache *ceph_dir_file_cachep;
+struct kmem_cache *ceph_mds_request_cachep;
 
 static void ceph_inode_init_once(void *foo)
 {
@@ -769,6 +781,10 @@ static int __init init_caches(void)
 	if (!ceph_dir_file_cachep)
 		goto bad_dir_file;
 
+	ceph_mds_request_cachep = KMEM_CACHE(ceph_mds_request, SLAB_MEM_SPREAD);
+	if (!ceph_mds_request_cachep)
+		goto bad_mds_req;
+
 	error = ceph_fscache_register();
 	if (error)
 		goto bad_fscache;
@@ -776,6 +792,8 @@ static int __init init_caches(void)
 	return 0;
 
 bad_fscache:
+	kmem_cache_destroy(ceph_mds_request_cachep);
+bad_mds_req:
 	kmem_cache_destroy(ceph_dir_file_cachep);
 bad_dir_file:
 	kmem_cache_destroy(ceph_file_cachep);
@@ -804,6 +822,7 @@ static void destroy_caches(void)
 	kmem_cache_destroy(ceph_dentry_cachep);
 	kmem_cache_destroy(ceph_file_cachep);
 	kmem_cache_destroy(ceph_dir_file_cachep);
+	kmem_cache_destroy(ceph_mds_request_cachep);
 
 	ceph_fscache_unregister();
 }
@@ -1107,6 +1126,15 @@ static void ceph_free_fc(struct fs_context *fc)
 
 static int ceph_reconfigure_fc(struct fs_context *fc)
 {
+	struct ceph_parse_opts_ctx *pctx = fc->fs_private;
+	struct ceph_mount_options *fsopt = pctx->opts;
+	struct ceph_fs_client *fsc = ceph_sb_to_client(fc->root->d_sb);
+
+	if (fsopt->flags & CEPH_MOUNT_OPT_ASYNC_DIROPS)
+		ceph_set_mount_opt(fsc, ASYNC_DIROPS);
+	else
+		ceph_clear_mount_opt(fsc, ASYNC_DIROPS);
+
 	sync_filesystem(fc->root->d_sb);
 	return 0;
 }
diff --git a/fs/ceph/super.h b/fs/ceph/super.h
index 037cdfb..60aac3a 100644
--- a/fs/ceph/super.h
+++ b/fs/ceph/super.h
@@ -43,13 +43,16 @@
 #define CEPH_MOUNT_OPT_MOUNTWAIT       (1<<12) /* mount waits if no mds is up */
 #define CEPH_MOUNT_OPT_NOQUOTADF       (1<<13) /* no root dir quota in statfs */
 #define CEPH_MOUNT_OPT_NOCOPYFROM      (1<<14) /* don't use RADOS 'copy-from' op */
+#define CEPH_MOUNT_OPT_ASYNC_DIROPS    (1<<15) /* allow async directory ops */
 
 #define CEPH_MOUNT_OPT_DEFAULT			\
 	(CEPH_MOUNT_OPT_DCACHE |		\
 	 CEPH_MOUNT_OPT_NOCOPYFROM)
 
 #define ceph_set_mount_opt(fsc, opt) \
-	(fsc)->mount_options->flags |= CEPH_MOUNT_OPT_##opt;
+	(fsc)->mount_options->flags |= CEPH_MOUNT_OPT_##opt
+#define ceph_clear_mount_opt(fsc, opt) \
+	(fsc)->mount_options->flags &= ~CEPH_MOUNT_OPT_##opt
 #define ceph_test_mount_opt(fsc, opt) \
 	(!!((fsc)->mount_options->flags & CEPH_MOUNT_OPT_##opt))
 
@@ -170,9 +173,9 @@ struct ceph_cap {
 	struct list_head caps_item;
 };
 
-#define CHECK_CAPS_NODELAY    1  /* do not delay any further */
-#define CHECK_CAPS_AUTHONLY   2  /* only check auth cap */
-#define CHECK_CAPS_FLUSH      4  /* flush any dirty caps */
+#define CHECK_CAPS_AUTHONLY   1  /* only check auth cap */
+#define CHECK_CAPS_FLUSH      2  /* flush any dirty caps */
+#define CHECK_CAPS_NOINVAL    4  /* don't invalidate pagecache */
 
 struct ceph_cap_flush {
 	u64 tid;
@@ -284,6 +287,7 @@ struct ceph_dentry_info {
 #define CEPH_DENTRY_REFERENCED		1
 #define CEPH_DENTRY_LEASE_LIST		2
 #define CEPH_DENTRY_SHRINK_LIST		4
+#define CEPH_DENTRY_PRIMARY_LINK	8
 
 struct ceph_inode_xattrs_info {
 	/*
@@ -315,13 +319,14 @@ struct ceph_inode_info {
 	u64 i_inline_version;
 	u32 i_time_warp_seq;
 
-	unsigned i_ceph_flags;
+	unsigned long i_ceph_flags;
 	atomic64_t i_release_count;
 	atomic64_t i_ordered_count;
 	atomic64_t i_complete_seq[2];
 
 	struct ceph_dir_layout i_dir_layout;
 	struct ceph_file_layout i_layout;
+	struct ceph_file_layout i_cached_layout;	// for async creates
 	char *i_symlink;
 
 	/* for dirs */
@@ -352,7 +357,6 @@ struct ceph_inode_info {
 	struct ceph_cap_flush *i_prealloc_cap_flush;
 	struct list_head i_cap_flush_list;
 	wait_queue_head_t i_cap_wq;      /* threads waiting on a capability */
-	unsigned long i_hold_caps_min; /* jiffies */
 	unsigned long i_hold_caps_max; /* jiffies */
 	struct list_head i_cap_delay_list;  /* for delayed cap release to mds */
 	struct ceph_cap_reservation i_cap_migration_resv;
@@ -361,6 +365,8 @@ struct ceph_inode_info {
 						    dirty|flushing caps */
 	unsigned i_snap_caps;           /* cap bits for snapped files */
 
+	unsigned long i_last_rd;
+	unsigned long i_last_wr;
 	int i_nr_by_mode[CEPH_FILE_MODE_BITS];  /* open file counts */
 
 	struct mutex i_truncate_mutex;
@@ -375,7 +381,7 @@ struct ceph_inode_info {
 
 	/* held references to caps */
 	int i_pin_ref;
-	int i_rd_ref, i_rdcache_ref, i_wr_ref, i_wb_ref;
+	int i_rd_ref, i_rdcache_ref, i_wr_ref, i_wb_ref, i_fx_ref;
 	int i_wrbuffer_ref, i_wrbuffer_ref_head;
 	atomic_t i_filelock_ref;
 	atomic_t i_shared_gen;       /* increment each time we get FILE_SHARED */
@@ -511,18 +517,18 @@ static inline struct inode *ceph_find_inode(struct super_block *sb,
  * Ceph inode.
  */
 #define CEPH_I_DIR_ORDERED	(1 << 0)  /* dentries in dir are ordered */
-#define CEPH_I_NODELAY		(1 << 1)  /* do not delay cap release */
 #define CEPH_I_FLUSH		(1 << 2)  /* do not delay flush of dirty metadata */
 #define CEPH_I_POOL_PERM	(1 << 3)  /* pool rd/wr bits are valid */
 #define CEPH_I_POOL_RD		(1 << 4)  /* can read from pool */
 #define CEPH_I_POOL_WR		(1 << 5)  /* can write to pool */
 #define CEPH_I_SEC_INITED	(1 << 6)  /* security initialized */
-#define CEPH_I_CAP_DROPPED	(1 << 7)  /* caps were forcibly dropped */
-#define CEPH_I_KICK_FLUSH	(1 << 8)  /* kick flushing caps */
-#define CEPH_I_FLUSH_SNAPS	(1 << 9)  /* need flush snapss */
-#define CEPH_I_ERROR_WRITE	(1 << 10) /* have seen write errors */
-#define CEPH_I_ERROR_FILELOCK	(1 << 11) /* have seen file lock errors */
-#define CEPH_I_ODIRECT		(1 << 12) /* inode in direct I/O mode */
+#define CEPH_I_KICK_FLUSH	(1 << 7)  /* kick flushing caps */
+#define CEPH_I_FLUSH_SNAPS	(1 << 8)  /* need flush snapss */
+#define CEPH_I_ERROR_WRITE	(1 << 9) /* have seen write errors */
+#define CEPH_I_ERROR_FILELOCK	(1 << 10) /* have seen file lock errors */
+#define CEPH_I_ODIRECT		(1 << 11) /* inode in direct I/O mode */
+#define CEPH_ASYNC_CREATE_BIT	(12)	  /* async create in flight for this */
+#define CEPH_I_ASYNC_CREATE	(1 << CEPH_ASYNC_CREATE_BIT)
 
 /*
  * Masks of ceph inode work.
@@ -674,18 +680,12 @@ extern int __ceph_caps_revoking_other(struct ceph_inode_info *ci,
 extern int ceph_caps_revoking(struct ceph_inode_info *ci, int mask);
 extern int __ceph_caps_used(struct ceph_inode_info *ci);
 
-extern int __ceph_caps_file_wanted(struct ceph_inode_info *ci);
-
-/*
- * wanted, by virtue of open file modes AND cap refs (buffered/cached data)
- */
-static inline int __ceph_caps_wanted(struct ceph_inode_info *ci)
+static inline bool __ceph_is_file_opened(struct ceph_inode_info *ci)
 {
-	int w = __ceph_caps_file_wanted(ci) | __ceph_caps_used(ci);
-	if (w & CEPH_CAP_FILE_BUFFER)
-		w |= CEPH_CAP_FILE_EXCL;  /* we want EXCL if dirty data */
-	return w;
+	return ci->i_nr_by_mode[0];
 }
+extern int __ceph_caps_file_wanted(struct ceph_inode_info *ci);
+extern int __ceph_caps_wanted(struct ceph_inode_info *ci);
 
 /* what the mds thinks we want */
 extern int __ceph_caps_mds_wanted(struct ceph_inode_info *ci, bool check);
@@ -899,6 +899,9 @@ static inline bool __ceph_have_pending_cap_snap(struct ceph_inode_info *ci)
 }
 
 /* inode.c */
+struct ceph_mds_reply_info_in;
+struct ceph_mds_reply_dirfrag;
+
 extern const struct inode_operations ceph_file_iops;
 
 extern struct inode *ceph_alloc_inode(struct super_block *sb);
@@ -914,6 +917,11 @@ extern void ceph_fill_file_time(struct inode *inode, int issued,
 				u64 time_warp_seq, struct timespec64 *ctime,
 				struct timespec64 *mtime,
 				struct timespec64 *atime);
+extern int ceph_fill_inode(struct inode *inode, struct page *locked_page,
+		    struct ceph_mds_reply_info_in *iinfo,
+		    struct ceph_mds_reply_dirfrag *dirinfo,
+		    struct ceph_mds_session *session, int cap_fmode,
+		    struct ceph_cap_reservation *caps_reservation);
 extern int ceph_fill_trace(struct super_block *sb,
 			   struct ceph_mds_request *req);
 extern int ceph_readdir_prepopulate(struct ceph_mds_request *req,
@@ -1042,7 +1050,7 @@ extern struct ceph_cap *ceph_get_cap(struct ceph_mds_client *mdsc,
 				     struct ceph_cap_reservation *ctx);
 extern void ceph_add_cap(struct inode *inode,
 			 struct ceph_mds_session *session, u64 cap_id,
-			 int fmode, unsigned issued, unsigned wanted,
+			 unsigned issued, unsigned wanted,
 			 unsigned cap, unsigned seq, u64 realmino, int flags,
 			 struct ceph_cap **new_cap);
 extern void __ceph_remove_cap(struct ceph_cap *cap, bool queue_release);
@@ -1058,8 +1066,12 @@ extern void ceph_early_kick_flushing_caps(struct ceph_mds_client *mdsc,
 					  struct ceph_mds_session *session);
 extern void ceph_kick_flushing_caps(struct ceph_mds_client *mdsc,
 				    struct ceph_mds_session *session);
+void ceph_kick_flushing_inode_caps(struct ceph_mds_session *session,
+				   struct ceph_inode_info *ci);
 extern struct ceph_cap *ceph_get_cap_for_mds(struct ceph_inode_info *ci,
 					     int mds);
+extern void ceph_take_cap_refs(struct ceph_inode_info *ci, int caps,
+				bool snap_rwsem_locked);
 extern void ceph_get_cap_refs(struct ceph_inode_info *ci, int caps);
 extern void ceph_put_cap_refs(struct ceph_inode_info *ci, int had);
 extern void ceph_put_wrbuffer_cap_refs(struct ceph_inode_info *ci, int nr,
@@ -1084,8 +1096,10 @@ extern int ceph_try_get_caps(struct inode *inode,
 			     int need, int want, bool nonblock, int *got);
 
 /* for counting open files by mode */
-extern void __ceph_get_fmode(struct ceph_inode_info *ci, int mode);
-extern void ceph_put_fmode(struct ceph_inode_info *ci, int mode);
+extern void ceph_get_fmode(struct ceph_inode_info *ci, int mode, int count);
+extern void ceph_put_fmode(struct ceph_inode_info *ci, int mode, int count);
+extern void __ceph_touch_fmode(struct ceph_inode_info *ci,
+			       struct ceph_mds_client *mdsc, int fmode);
 
 /* addr.c */
 extern const struct address_space_operations ceph_aops;
@@ -1097,7 +1111,7 @@ extern void ceph_pool_perm_destroy(struct ceph_mds_client* mdsc);
 /* file.c */
 extern const struct file_operations ceph_file_fops;
 
-extern int ceph_renew_caps(struct inode *inode);
+extern int ceph_renew_caps(struct inode *inode, int fmode);
 extern int ceph_open(struct inode *inode, struct file *file);
 extern int ceph_atomic_open(struct inode *dir, struct dentry *dentry,
 			    struct file *file, unsigned flags, umode_t mode);
diff --git a/fs/cifs/Kconfig b/fs/cifs/Kconfig
index 22cf04f..604f65f 100644
--- a/fs/cifs/Kconfig
+++ b/fs/cifs/Kconfig
@@ -202,7 +202,7 @@
 	help
 	  Enables SMB Direct support for SMB 3.0, 3.02 and 3.1.1.
 	  SMB Direct allows transferring SMB packets over RDMA. If unsure,
-	  say N.
+	  say Y.
 
 config CIFS_FSCACHE
 	bool "Provide CIFS client caching support"
diff --git a/fs/cifs/cifs_debug.c b/fs/cifs/cifs_debug.c
index 276e4b5..916567d 100644
--- a/fs/cifs/cifs_debug.c
+++ b/fs/cifs/cifs_debug.c
@@ -323,10 +323,8 @@ static int cifs_debug_data_proc_show(struct seq_file *m, void *v)
 			atomic_read(&server->smbd_conn->send_credits),
 			atomic_read(&server->smbd_conn->receive_credits),
 			server->smbd_conn->receive_credit_target);
-		seq_printf(m, "\nPending send_pending: %x "
-			"send_payload_pending: %x",
-			atomic_read(&server->smbd_conn->send_pending),
-			atomic_read(&server->smbd_conn->send_payload_pending));
+		seq_printf(m, "\nPending send_pending: %x ",
+			atomic_read(&server->smbd_conn->send_pending));
 		seq_printf(m, "\nReceive buffers count_receive_queue: %x "
 			"count_empty_packet_queue: %x",
 			server->smbd_conn->count_receive_queue,
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 94e3ed4..c31f362 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -1208,6 +1208,10 @@ static ssize_t cifs_copy_file_range(struct file *src_file, loff_t off,
 {
 	unsigned int xid = get_xid();
 	ssize_t rc;
+	struct cifsFileInfo *cfile = dst_file->private_data;
+
+	if (cfile->swapfile)
+		return -EOPNOTSUPP;
 
 	rc = cifs_file_copychunk_range(xid, src_file, off, dst_file, destoff,
 					len, flags);
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index 0d95636..05dd3de 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -426,7 +426,8 @@ struct smb_version_operations {
 	/* generate new lease key */
 	void (*new_lease_key)(struct cifs_fid *);
 	int (*generate_signingkey)(struct cifs_ses *);
-	int (*calc_signature)(struct smb_rqst *, struct TCP_Server_Info *);
+	int (*calc_signature)(struct smb_rqst *, struct TCP_Server_Info *,
+				bool allocate_crypto);
 	int (*set_integrity)(const unsigned int, struct cifs_tcon *tcon,
 			     struct cifsFileInfo *src_file);
 	int (*enum_snapshots)(const unsigned int xid, struct cifs_tcon *tcon,
@@ -1312,6 +1313,7 @@ struct cifsFileInfo {
 	struct tcon_link *tlink;
 	unsigned int f_flags;
 	bool invalidHandle:1;	/* file closed via session abend */
+	bool swapfile:1;
 	bool oplock_break_cancelled:1;
 	unsigned int oplock_epoch; /* epoch from the lease break */
 	__u32 oplock_level; /* oplock/lease level from the lease break */
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 140efc1..182b864 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -594,6 +594,8 @@ decode_lanman_negprot_rsp(struct TCP_Server_Info *server, NEGOTIATE_RSP *pSMBr)
 			       cifs_max_pending);
 	set_credits(server, server->maxReq);
 	server->maxBuf = le16_to_cpu(rsp->MaxBufSize);
+	/* set up max_read for readpages check */
+	server->max_read = server->maxBuf;
 	/* even though we do not use raw we might as well set this
 	accurately, in case we ever find a need for it */
 	if ((le16_to_cpu(rsp->RawMode) & RAW_ENABLE) == RAW_ENABLE) {
@@ -755,6 +757,8 @@ CIFSSMBNegotiate(const unsigned int xid, struct cifs_ses *ses)
 	set_credits(server, server->maxReq);
 	/* probably no need to store and check maxvcs */
 	server->maxBuf = le32_to_cpu(pSMBr->MaxBufferSize);
+	/* set up max_read for readpages check */
+	server->max_read = server->maxBuf;
 	server->max_rw = le32_to_cpu(pSMBr->MaxRawSize);
 	cifs_dbg(NOISY, "Max buf = %d\n", ses->server->maxBuf);
 	server->capabilities = le32_to_cpu(pSMBr->Capabilities);
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 5920820..0b1528e 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -4808,6 +4808,60 @@ cifs_direct_io(struct kiocb *iocb, struct iov_iter *iter)
         return -EINVAL;
 }
 
+static int cifs_swap_activate(struct swap_info_struct *sis,
+			      struct file *swap_file, sector_t *span)
+{
+	struct cifsFileInfo *cfile = swap_file->private_data;
+	struct inode *inode = swap_file->f_mapping->host;
+	unsigned long blocks;
+	long long isize;
+
+	cifs_dbg(FYI, "swap activate\n");
+
+	spin_lock(&inode->i_lock);
+	blocks = inode->i_blocks;
+	isize = inode->i_size;
+	spin_unlock(&inode->i_lock);
+	if (blocks*512 < isize) {
+		pr_warn("swap activate: swapfile has holes\n");
+		return -EINVAL;
+	}
+	*span = sis->pages;
+
+	printk_once(KERN_WARNING "Swap support over SMB3 is experimental\n");
+
+	/*
+	 * TODO: consider adding ACL (or documenting how) to prevent other
+	 * users (on this or other systems) from reading it
+	 */
+
+
+	/* TODO: add sk_set_memalloc(inet) or similar */
+
+	if (cfile)
+		cfile->swapfile = true;
+	/*
+	 * TODO: Since file already open, we can't open with DENY_ALL here
+	 * but we could add call to grab a byte range lock to prevent others
+	 * from reading or writing the file
+	 */
+
+	return 0;
+}
+
+static void cifs_swap_deactivate(struct file *file)
+{
+	struct cifsFileInfo *cfile = file->private_data;
+
+	cifs_dbg(FYI, "swap deactivate\n");
+
+	/* TODO: undo sk_set_memalloc(inet) will eventually be needed */
+
+	if (cfile)
+		cfile->swapfile = false;
+
+	/* do we need to unpin (or unlock) the file */
+}
 
 const struct address_space_operations cifs_addr_ops = {
 	.readpage = cifs_readpage,
@@ -4821,6 +4875,13 @@ const struct address_space_operations cifs_addr_ops = {
 	.direct_IO = cifs_direct_io,
 	.invalidatepage = cifs_invalidate_page,
 	.launder_page = cifs_launder_page,
+	/*
+	 * TODO: investigate and if useful we could add an cifs_migratePage
+	 * helper (under an CONFIG_MIGRATION) in the future, and also
+	 * investigate and add an is_dirty_writeback helper if needed
+	 */
+	.swap_activate = cifs_swap_activate,
+	.swap_deactivate = cifs_swap_deactivate,
 };
 
 /*
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 8d01ec2..390d2b1 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -61,7 +61,7 @@ static void cifs_set_ops(struct inode *inode)
 		}
 
 		/* check if server can support readpages */
-		if (cifs_sb_master_tcon(cifs_sb)->ses->server->maxBuf <
+		if (cifs_sb_master_tcon(cifs_sb)->ses->server->max_read <
 				PAGE_SIZE + MAX_CIFS_HDR_SIZE)
 			inode->i_data.a_ops = &cifs_addr_ops_smallbuf;
 		else
@@ -2026,6 +2026,10 @@ cifs_revalidate_mapping(struct inode *inode)
 	int rc;
 	unsigned long *flags = &CIFS_I(inode)->flags;
 
+	/* swapfiles are not supposed to be shared */
+	if (IS_SWAPFILE(inode))
+		return 0;
+
 	rc = wait_on_bit_lock_action(flags, CIFS_INO_LOCK, cifs_wait_bit_killable,
 				     TASK_KILLABLE);
 	if (rc)
diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index 19e4a5d..50f776a 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -246,7 +246,7 @@ cifs_posix_to_fattr(struct cifs_fattr *fattr, struct smb2_posix_info *info,
 	 */
 	fattr->cf_mode = le32_to_cpu(info->Mode) & ~S_IFMT;
 
-	cifs_dbg(VFS, "XXX dev %d, reparse %d, mode %o",
+	cifs_dbg(FYI, "posix fattr: dev %d, reparse %d, mode %o",
 		 le32_to_cpu(info->DeviceId),
 		 le32_to_cpu(info->ReparseTag),
 		 le32_to_cpu(info->Mode));
diff --git a/fs/cifs/smb2misc.c b/fs/cifs/smb2misc.c
index 0511aaf..497afb0 100644
--- a/fs/cifs/smb2misc.c
+++ b/fs/cifs/smb2misc.c
@@ -766,6 +766,20 @@ smb2_handle_cancelled_close(struct cifs_tcon *tcon, __u64 persistent_fid,
 
 	cifs_dbg(FYI, "%s: tc_count=%d\n", __func__, tcon->tc_count);
 	spin_lock(&cifs_tcp_ses_lock);
+	if (tcon->tc_count <= 0) {
+		struct TCP_Server_Info *server = NULL;
+
+		WARN_ONCE(tcon->tc_count < 0, "tcon refcount is negative");
+		spin_unlock(&cifs_tcp_ses_lock);
+
+		if (tcon->ses)
+			server = tcon->ses->server;
+
+		cifs_server_dbg(FYI, "tid=%u: tcon is closing, skipping async close retry of fid %llu %llu\n",
+				tcon->tid, persistent_fid, volatile_fid);
+
+		return 0;
+	}
 	tcon->tc_count++;
 	spin_unlock(&cifs_tcp_ses_lock);
 
diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c
index 47d3e38..b30aa3c 100644
--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -1552,6 +1552,21 @@ SMB2_sess_auth_rawntlmssp_authenticate(struct SMB2_sess_data *sess_data)
 	}
 
 	rc = SMB2_sess_establish_session(sess_data);
+#ifdef CONFIG_CIFS_DEBUG_DUMP_KEYS
+	if (ses->server->dialect < SMB30_PROT_ID) {
+		cifs_dbg(VFS, "%s: dumping generated SMB2 session keys\n", __func__);
+		/*
+		 * The session id is opaque in terms of endianness, so we can't
+		 * print it as a long long. we dump it as we got it on the wire
+		 */
+		cifs_dbg(VFS, "Session Id    %*ph\n", (int)sizeof(ses->Suid),
+			 &ses->Suid);
+		cifs_dbg(VFS, "Session Key   %*ph\n",
+			 SMB2_NTLMV2_SESSKEY_SIZE, ses->auth_key.response);
+		cifs_dbg(VFS, "Signing Key   %*ph\n",
+			 SMB3_SIGN_KEY_SIZE, ses->auth_key.response);
+	}
+#endif
 out:
 	kfree(ntlmssp_blob);
 	SMB2_sess_free_buffer(sess_data);
diff --git a/fs/cifs/smb2proto.h b/fs/cifs/smb2proto.h
index 4d1ff7b..087d5f1 100644
--- a/fs/cifs/smb2proto.h
+++ b/fs/cifs/smb2proto.h
@@ -55,9 +55,11 @@ extern struct cifs_ses *smb2_find_smb_ses(struct TCP_Server_Info *server,
 extern struct cifs_tcon *smb2_find_smb_tcon(struct TCP_Server_Info *server,
 						__u64 ses_id, __u32  tid);
 extern int smb2_calc_signature(struct smb_rqst *rqst,
-				struct TCP_Server_Info *server);
+				struct TCP_Server_Info *server,
+				bool allocate_crypto);
 extern int smb3_calc_signature(struct smb_rqst *rqst,
-				struct TCP_Server_Info *server);
+				struct TCP_Server_Info *server,
+				bool allocate_crypto);
 extern void smb2_echo_request(struct work_struct *work);
 extern __le32 smb2_get_lease_state(struct cifsInodeInfo *cinode);
 extern bool smb2_is_valid_oplock_break(char *buffer,
diff --git a/fs/cifs/smb2transport.c b/fs/cifs/smb2transport.c
index 20cc79e..c0348e3 100644
--- a/fs/cifs/smb2transport.c
+++ b/fs/cifs/smb2transport.c
@@ -41,14 +41,6 @@
 #include "smb2glob.h"
 
 static int
-smb2_crypto_shash_allocate(struct TCP_Server_Info *server)
-{
-	return cifs_alloc_hash("hmac(sha256)",
-			       &server->secmech.hmacsha256,
-			       &server->secmech.sdeschmacsha256);
-}
-
-static int
 smb3_crypto_shash_allocate(struct TCP_Server_Info *server)
 {
 	struct cifs_secmech *p = &server->secmech;
@@ -219,7 +211,8 @@ smb2_find_smb_tcon(struct TCP_Server_Info *server, __u64 ses_id, __u32  tid)
 }
 
 int
-smb2_calc_signature(struct smb_rqst *rqst, struct TCP_Server_Info *server)
+smb2_calc_signature(struct smb_rqst *rqst, struct TCP_Server_Info *server,
+			bool allocate_crypto)
 {
 	int rc;
 	unsigned char smb2_signature[SMB2_HMACSHA256_SIZE];
@@ -228,6 +221,8 @@ smb2_calc_signature(struct smb_rqst *rqst, struct TCP_Server_Info *server)
 	struct smb2_sync_hdr *shdr = (struct smb2_sync_hdr *)iov[0].iov_base;
 	struct cifs_ses *ses;
 	struct shash_desc *shash;
+	struct crypto_shash *hash;
+	struct sdesc *sdesc = NULL;
 	struct smb_rqst drqst;
 
 	ses = smb2_find_smb_ses(server, shdr->SessionId);
@@ -239,24 +234,32 @@ smb2_calc_signature(struct smb_rqst *rqst, struct TCP_Server_Info *server)
 	memset(smb2_signature, 0x0, SMB2_HMACSHA256_SIZE);
 	memset(shdr->Signature, 0x0, SMB2_SIGNATURE_SIZE);
 
-	rc = smb2_crypto_shash_allocate(server);
-	if (rc) {
-		cifs_server_dbg(VFS, "%s: sha256 alloc failed\n", __func__);
-		return rc;
+	if (allocate_crypto) {
+		rc = cifs_alloc_hash("hmac(sha256)", &hash, &sdesc);
+		if (rc) {
+			cifs_server_dbg(VFS,
+					"%s: sha256 alloc failed\n", __func__);
+			return rc;
+		}
+		shash = &sdesc->shash;
+	} else {
+		hash = server->secmech.hmacsha256;
+		shash = &server->secmech.sdeschmacsha256->shash;
 	}
 
-	rc = crypto_shash_setkey(server->secmech.hmacsha256,
-				 ses->auth_key.response, SMB2_NTLMV2_SESSKEY_SIZE);
+	rc = crypto_shash_setkey(hash, ses->auth_key.response,
+			SMB2_NTLMV2_SESSKEY_SIZE);
 	if (rc) {
-		cifs_server_dbg(VFS, "%s: Could not update with response\n", __func__);
-		return rc;
+		cifs_server_dbg(VFS,
+				"%s: Could not update with response\n",
+				__func__);
+		goto out;
 	}
 
-	shash = &server->secmech.sdeschmacsha256->shash;
 	rc = crypto_shash_init(shash);
 	if (rc) {
 		cifs_server_dbg(VFS, "%s: Could not init sha256", __func__);
-		return rc;
+		goto out;
 	}
 
 	/*
@@ -271,9 +274,10 @@ smb2_calc_signature(struct smb_rqst *rqst, struct TCP_Server_Info *server)
 		rc = crypto_shash_update(shash, iov[0].iov_base,
 					 iov[0].iov_len);
 		if (rc) {
-			cifs_server_dbg(VFS, "%s: Could not update with payload\n",
-				 __func__);
-			return rc;
+			cifs_server_dbg(VFS,
+					"%s: Could not update with payload\n",
+					__func__);
+			goto out;
 		}
 		drqst.rq_iov++;
 		drqst.rq_nvec--;
@@ -283,6 +287,9 @@ smb2_calc_signature(struct smb_rqst *rqst, struct TCP_Server_Info *server)
 	if (!rc)
 		memcpy(shdr->Signature, sigptr, SMB2_SIGNATURE_SIZE);
 
+out:
+	if (allocate_crypto)
+		cifs_free_hash(&hash, &sdesc);
 	return rc;
 }
 
@@ -504,14 +511,17 @@ generate_smb311signingkey(struct cifs_ses *ses)
 }
 
 int
-smb3_calc_signature(struct smb_rqst *rqst, struct TCP_Server_Info *server)
+smb3_calc_signature(struct smb_rqst *rqst, struct TCP_Server_Info *server,
+			bool allocate_crypto)
 {
 	int rc;
 	unsigned char smb3_signature[SMB2_CMACAES_SIZE];
 	unsigned char *sigptr = smb3_signature;
 	struct kvec *iov = rqst->rq_iov;
 	struct smb2_sync_hdr *shdr = (struct smb2_sync_hdr *)iov[0].iov_base;
-	struct shash_desc *shash = &server->secmech.sdesccmacaes->shash;
+	struct shash_desc *shash;
+	struct crypto_shash *hash;
+	struct sdesc *sdesc = NULL;
 	struct smb_rqst drqst;
 	u8 key[SMB3_SIGN_KEY_SIZE];
 
@@ -519,14 +529,24 @@ smb3_calc_signature(struct smb_rqst *rqst, struct TCP_Server_Info *server)
 	if (rc)
 		return 0;
 
+	if (allocate_crypto) {
+		rc = cifs_alloc_hash("cmac(aes)", &hash, &sdesc);
+		if (rc)
+			return rc;
+
+		shash = &sdesc->shash;
+	} else {
+		hash = server->secmech.cmacaes;
+		shash = &server->secmech.sdesccmacaes->shash;
+	}
+
 	memset(smb3_signature, 0x0, SMB2_CMACAES_SIZE);
 	memset(shdr->Signature, 0x0, SMB2_SIGNATURE_SIZE);
 
-	rc = crypto_shash_setkey(server->secmech.cmacaes,
-				 key, SMB2_CMACAES_SIZE);
+	rc = crypto_shash_setkey(hash, key, SMB2_CMACAES_SIZE);
 	if (rc) {
 		cifs_server_dbg(VFS, "%s: Could not set key for cmac aes\n", __func__);
-		return rc;
+		goto out;
 	}
 
 	/*
@@ -537,7 +557,7 @@ smb3_calc_signature(struct smb_rqst *rqst, struct TCP_Server_Info *server)
 	rc = crypto_shash_init(shash);
 	if (rc) {
 		cifs_server_dbg(VFS, "%s: Could not init cmac aes\n", __func__);
-		return rc;
+		goto out;
 	}
 
 	/*
@@ -554,7 +574,7 @@ smb3_calc_signature(struct smb_rqst *rqst, struct TCP_Server_Info *server)
 		if (rc) {
 			cifs_server_dbg(VFS, "%s: Could not update with payload\n",
 				 __func__);
-			return rc;
+			goto out;
 		}
 		drqst.rq_iov++;
 		drqst.rq_nvec--;
@@ -564,6 +584,9 @@ smb3_calc_signature(struct smb_rqst *rqst, struct TCP_Server_Info *server)
 	if (!rc)
 		memcpy(shdr->Signature, sigptr, SMB2_SIGNATURE_SIZE);
 
+out:
+	if (allocate_crypto)
+		cifs_free_hash(&hash, &sdesc);
 	return rc;
 }
 
@@ -593,7 +616,7 @@ smb2_sign_rqst(struct smb_rqst *rqst, struct TCP_Server_Info *server)
 		return 0;
 	}
 
-	rc = server->ops->calc_signature(rqst, server);
+	rc = server->ops->calc_signature(rqst, server, false);
 
 	return rc;
 }
@@ -631,16 +654,14 @@ smb2_verify_signature(struct smb_rqst *rqst, struct TCP_Server_Info *server)
 
 	memset(shdr->Signature, 0, SMB2_SIGNATURE_SIZE);
 
-	mutex_lock(&server->srv_mutex);
-	rc = server->ops->calc_signature(rqst, server);
-	mutex_unlock(&server->srv_mutex);
+	rc = server->ops->calc_signature(rqst, server, true);
 
 	if (rc)
 		return rc;
 
 	if (memcmp(server_response_sig, shdr->Signature, SMB2_SIGNATURE_SIZE)) {
-		dump_stack();
-		cifs_dbg(VFS, "sign fail cmd 0x%x message id 0x%llx\n", shdr->Command, shdr->MessageId);
+		cifs_dbg(VFS, "sign fail cmd 0x%x message id 0x%llx\n",
+			shdr->Command, shdr->MessageId);
 		return -EACCES;
 	} else
 		return 0;
diff --git a/fs/cifs/smbdirect.c b/fs/cifs/smbdirect.c
index 8da43a5..1a5834a 100644
--- a/fs/cifs/smbdirect.c
+++ b/fs/cifs/smbdirect.c
@@ -284,13 +284,10 @@ static void send_done(struct ib_cq *cq, struct ib_wc *wc)
 			request->sge[i].length,
 			DMA_TO_DEVICE);
 
-	if (request->has_payload) {
-		if (atomic_dec_and_test(&request->info->send_payload_pending))
-			wake_up(&request->info->wait_send_payload_pending);
-	} else {
-		if (atomic_dec_and_test(&request->info->send_pending))
-			wake_up(&request->info->wait_send_pending);
-	}
+	if (atomic_dec_and_test(&request->info->send_pending))
+		wake_up(&request->info->wait_send_pending);
+
+	wake_up(&request->info->wait_post_send);
 
 	mempool_free(request, request->info->request_mempool);
 }
@@ -383,27 +380,6 @@ static bool process_negotiation_response(
 	return true;
 }
 
-/*
- * Check and schedule to send an immediate packet
- * This is used to extend credtis to remote peer to keep the transport busy
- */
-static void check_and_send_immediate(struct smbd_connection *info)
-{
-	if (info->transport_status != SMBD_CONNECTED)
-		return;
-
-	info->send_immediate = true;
-
-	/*
-	 * Promptly send a packet if our peer is running low on receive
-	 * credits
-	 */
-	if (atomic_read(&info->receive_credits) <
-		info->receive_credit_target - 1)
-		queue_delayed_work(
-			info->workqueue, &info->send_immediate_work, 0);
-}
-
 static void smbd_post_send_credits(struct work_struct *work)
 {
 	int ret = 0;
@@ -453,10 +429,16 @@ static void smbd_post_send_credits(struct work_struct *work)
 	info->new_credits_offered += ret;
 	spin_unlock(&info->lock_new_credits_offered);
 
-	atomic_add(ret, &info->receive_credits);
-
-	/* Check if we can post new receive and grant credits to peer */
-	check_and_send_immediate(info);
+	/* Promptly send an immediate packet as defined in [MS-SMBD] 3.1.1.1 */
+	info->send_immediate = true;
+	if (atomic_read(&info->receive_credits) <
+		info->receive_credit_target - 1) {
+		if (info->keep_alive_requested == KEEP_ALIVE_PENDING ||
+		    info->send_immediate) {
+			log_keep_alive(INFO, "send an empty message\n");
+			smbd_post_send_empty(info);
+		}
+	}
 }
 
 /* Called from softirq, when recv is done */
@@ -551,12 +533,6 @@ static void recv_done(struct ib_cq *cq, struct ib_wc *wc)
 			info->keep_alive_requested = KEEP_ALIVE_PENDING;
 		}
 
-		/*
-		 * Check if we need to send something to remote peer to
-		 * grant more credits or respond to KEEP_ALIVE packet
-		 */
-		check_and_send_immediate(info);
-
 		return;
 
 	default:
@@ -749,7 +725,6 @@ static int smbd_post_send_negotiate_req(struct smbd_connection *info)
 		request->sge[0].addr,
 		request->sge[0].length, request->sge[0].lkey);
 
-	request->has_payload = false;
 	atomic_inc(&info->send_pending);
 	rc = ib_post_send(info->id->qp, &send_wr, NULL);
 	if (!rc)
@@ -806,120 +781,9 @@ static int manage_keep_alive_before_sending(struct smbd_connection *info)
 	return 0;
 }
 
-/*
- * Build and prepare the SMBD packet header
- * This function waits for avaialbe send credits and build a SMBD packet
- * header. The caller then optional append payload to the packet after
- * the header
- * intput values
- * size: the size of the payload
- * remaining_data_length: remaining data to send if this is part of a
- * fragmented packet
- * output values
- * request_out: the request allocated from this function
- * return values: 0 on success, otherwise actual error code returned
- */
-static int smbd_create_header(struct smbd_connection *info,
-		int size, int remaining_data_length,
-		struct smbd_request **request_out)
-{
-	struct smbd_request *request;
-	struct smbd_data_transfer *packet;
-	int header_length;
-	int rc;
-
-	/* Wait for send credits. A SMBD packet needs one credit */
-	rc = wait_event_interruptible(info->wait_send_queue,
-		atomic_read(&info->send_credits) > 0 ||
-		info->transport_status != SMBD_CONNECTED);
-	if (rc)
-		return rc;
-
-	if (info->transport_status != SMBD_CONNECTED) {
-		log_outgoing(ERR, "disconnected not sending\n");
-		return -EAGAIN;
-	}
-	atomic_dec(&info->send_credits);
-
-	request = mempool_alloc(info->request_mempool, GFP_KERNEL);
-	if (!request) {
-		rc = -ENOMEM;
-		goto err;
-	}
-
-	request->info = info;
-
-	/* Fill in the packet header */
-	packet = smbd_request_payload(request);
-	packet->credits_requested = cpu_to_le16(info->send_credit_target);
-	packet->credits_granted =
-		cpu_to_le16(manage_credits_prior_sending(info));
-	info->send_immediate = false;
-
-	packet->flags = 0;
-	if (manage_keep_alive_before_sending(info))
-		packet->flags |= cpu_to_le16(SMB_DIRECT_RESPONSE_REQUESTED);
-
-	packet->reserved = 0;
-	if (!size)
-		packet->data_offset = 0;
-	else
-		packet->data_offset = cpu_to_le32(24);
-	packet->data_length = cpu_to_le32(size);
-	packet->remaining_data_length = cpu_to_le32(remaining_data_length);
-	packet->padding = 0;
-
-	log_outgoing(INFO, "credits_requested=%d credits_granted=%d "
-		"data_offset=%d data_length=%d remaining_data_length=%d\n",
-		le16_to_cpu(packet->credits_requested),
-		le16_to_cpu(packet->credits_granted),
-		le32_to_cpu(packet->data_offset),
-		le32_to_cpu(packet->data_length),
-		le32_to_cpu(packet->remaining_data_length));
-
-	/* Map the packet to DMA */
-	header_length = sizeof(struct smbd_data_transfer);
-	/* If this is a packet without payload, don't send padding */
-	if (!size)
-		header_length = offsetof(struct smbd_data_transfer, padding);
-
-	request->num_sge = 1;
-	request->sge[0].addr = ib_dma_map_single(info->id->device,
-						 (void *)packet,
-						 header_length,
-						 DMA_TO_DEVICE);
-	if (ib_dma_mapping_error(info->id->device, request->sge[0].addr)) {
-		mempool_free(request, info->request_mempool);
-		rc = -EIO;
-		goto err;
-	}
-
-	request->sge[0].length = header_length;
-	request->sge[0].lkey = info->pd->local_dma_lkey;
-
-	*request_out = request;
-	return 0;
-
-err:
-	atomic_inc(&info->send_credits);
-	return rc;
-}
-
-static void smbd_destroy_header(struct smbd_connection *info,
-		struct smbd_request *request)
-{
-
-	ib_dma_unmap_single(info->id->device,
-			    request->sge[0].addr,
-			    request->sge[0].length,
-			    DMA_TO_DEVICE);
-	mempool_free(request, info->request_mempool);
-	atomic_inc(&info->send_credits);
-}
-
 /* Post the send request */
 static int smbd_post_send(struct smbd_connection *info,
-		struct smbd_request *request, bool has_payload)
+		struct smbd_request *request)
 {
 	struct ib_send_wr send_wr;
 	int rc, i;
@@ -944,24 +808,9 @@ static int smbd_post_send(struct smbd_connection *info,
 	send_wr.opcode = IB_WR_SEND;
 	send_wr.send_flags = IB_SEND_SIGNALED;
 
-	if (has_payload) {
-		request->has_payload = true;
-		atomic_inc(&info->send_payload_pending);
-	} else {
-		request->has_payload = false;
-		atomic_inc(&info->send_pending);
-	}
-
 	rc = ib_post_send(info->id->qp, &send_wr, NULL);
 	if (rc) {
 		log_rdma_send(ERR, "ib_post_send failed rc=%d\n", rc);
-		if (has_payload) {
-			if (atomic_dec_and_test(&info->send_payload_pending))
-				wake_up(&info->wait_send_payload_pending);
-		} else {
-			if (atomic_dec_and_test(&info->send_pending))
-				wake_up(&info->wait_send_pending);
-		}
 		smbd_disconnect_rdma_connection(info);
 		rc = -EAGAIN;
 	} else
@@ -977,14 +826,107 @@ static int smbd_post_send_sgl(struct smbd_connection *info,
 {
 	int num_sgs;
 	int i, rc;
+	int header_length;
 	struct smbd_request *request;
+	struct smbd_data_transfer *packet;
+	int new_credits;
 	struct scatterlist *sg;
 
-	rc = smbd_create_header(
-		info, data_length, remaining_data_length, &request);
+wait_credit:
+	/* Wait for send credits. A SMBD packet needs one credit */
+	rc = wait_event_interruptible(info->wait_send_queue,
+		atomic_read(&info->send_credits) > 0 ||
+		info->transport_status != SMBD_CONNECTED);
 	if (rc)
-		return rc;
+		goto err_wait_credit;
 
+	if (info->transport_status != SMBD_CONNECTED) {
+		log_outgoing(ERR, "disconnected not sending on wait_credit\n");
+		rc = -EAGAIN;
+		goto err_wait_credit;
+	}
+	if (unlikely(atomic_dec_return(&info->send_credits) < 0)) {
+		atomic_inc(&info->send_credits);
+		goto wait_credit;
+	}
+
+wait_send_queue:
+	wait_event(info->wait_post_send,
+		atomic_read(&info->send_pending) < info->send_credit_target ||
+		info->transport_status != SMBD_CONNECTED);
+
+	if (info->transport_status != SMBD_CONNECTED) {
+		log_outgoing(ERR, "disconnected not sending on wait_send_queue\n");
+		rc = -EAGAIN;
+		goto err_wait_send_queue;
+	}
+
+	if (unlikely(atomic_inc_return(&info->send_pending) >
+				info->send_credit_target)) {
+		atomic_dec(&info->send_pending);
+		goto wait_send_queue;
+	}
+
+	request = mempool_alloc(info->request_mempool, GFP_KERNEL);
+	if (!request) {
+		rc = -ENOMEM;
+		goto err_alloc;
+	}
+
+	request->info = info;
+
+	/* Fill in the packet header */
+	packet = smbd_request_payload(request);
+	packet->credits_requested = cpu_to_le16(info->send_credit_target);
+
+	new_credits = manage_credits_prior_sending(info);
+	atomic_add(new_credits, &info->receive_credits);
+	packet->credits_granted = cpu_to_le16(new_credits);
+
+	info->send_immediate = false;
+
+	packet->flags = 0;
+	if (manage_keep_alive_before_sending(info))
+		packet->flags |= cpu_to_le16(SMB_DIRECT_RESPONSE_REQUESTED);
+
+	packet->reserved = 0;
+	if (!data_length)
+		packet->data_offset = 0;
+	else
+		packet->data_offset = cpu_to_le32(24);
+	packet->data_length = cpu_to_le32(data_length);
+	packet->remaining_data_length = cpu_to_le32(remaining_data_length);
+	packet->padding = 0;
+
+	log_outgoing(INFO, "credits_requested=%d credits_granted=%d "
+		"data_offset=%d data_length=%d remaining_data_length=%d\n",
+		le16_to_cpu(packet->credits_requested),
+		le16_to_cpu(packet->credits_granted),
+		le32_to_cpu(packet->data_offset),
+		le32_to_cpu(packet->data_length),
+		le32_to_cpu(packet->remaining_data_length));
+
+	/* Map the packet to DMA */
+	header_length = sizeof(struct smbd_data_transfer);
+	/* If this is a packet without payload, don't send padding */
+	if (!data_length)
+		header_length = offsetof(struct smbd_data_transfer, padding);
+
+	request->num_sge = 1;
+	request->sge[0].addr = ib_dma_map_single(info->id->device,
+						 (void *)packet,
+						 header_length,
+						 DMA_TO_DEVICE);
+	if (ib_dma_mapping_error(info->id->device, request->sge[0].addr)) {
+		rc = -EIO;
+		request->sge[0].addr = 0;
+		goto err_dma;
+	}
+
+	request->sge[0].length = header_length;
+	request->sge[0].lkey = info->pd->local_dma_lkey;
+
+	/* Fill in the packet data payload */
 	num_sgs = sgl ? sg_nents(sgl) : 0;
 	for_each_sg(sgl, sg, num_sgs, i) {
 		request->sge[i+1].addr =
@@ -994,25 +936,41 @@ static int smbd_post_send_sgl(struct smbd_connection *info,
 				info->id->device, request->sge[i+1].addr)) {
 			rc = -EIO;
 			request->sge[i+1].addr = 0;
-			goto dma_mapping_failure;
+			goto err_dma;
 		}
 		request->sge[i+1].length = sg->length;
 		request->sge[i+1].lkey = info->pd->local_dma_lkey;
 		request->num_sge++;
 	}
 
-	rc = smbd_post_send(info, request, data_length);
+	rc = smbd_post_send(info, request);
 	if (!rc)
 		return 0;
 
-dma_mapping_failure:
-	for (i = 1; i < request->num_sge; i++)
+err_dma:
+	for (i = 0; i < request->num_sge; i++)
 		if (request->sge[i].addr)
 			ib_dma_unmap_single(info->id->device,
 					    request->sge[i].addr,
 					    request->sge[i].length,
 					    DMA_TO_DEVICE);
-	smbd_destroy_header(info, request);
+	mempool_free(request, info->request_mempool);
+
+	/* roll back receive credits and credits to be offered */
+	spin_lock(&info->lock_new_credits_offered);
+	info->new_credits_offered += new_credits;
+	spin_unlock(&info->lock_new_credits_offered);
+	atomic_sub(new_credits, &info->receive_credits);
+
+err_alloc:
+	if (atomic_dec_and_test(&info->send_pending))
+		wake_up(&info->wait_send_pending);
+
+err_wait_send_queue:
+	/* roll back send credits and pending */
+	atomic_inc(&info->send_credits);
+
+err_wait_credit:
 	return rc;
 }
 
@@ -1334,25 +1292,6 @@ static void destroy_receive_buffers(struct smbd_connection *info)
 		mempool_free(response, info->response_mempool);
 }
 
-/*
- * Check and send an immediate or keep alive packet
- * The condition to send those packets are defined in [MS-SMBD] 3.1.1.1
- * Connection.KeepaliveRequested and Connection.SendImmediate
- * The idea is to extend credits to server as soon as it becomes available
- */
-static void send_immediate_work(struct work_struct *work)
-{
-	struct smbd_connection *info = container_of(
-					work, struct smbd_connection,
-					send_immediate_work.work);
-
-	if (info->keep_alive_requested == KEEP_ALIVE_PENDING ||
-	    info->send_immediate) {
-		log_keep_alive(INFO, "send an empty message\n");
-		smbd_post_send_empty(info);
-	}
-}
-
 /* Implement idle connection timer [MS-SMBD] 3.1.6.2 */
 static void idle_connection_timer(struct work_struct *work)
 {
@@ -1407,14 +1346,10 @@ void smbd_destroy(struct TCP_Server_Info *server)
 
 	log_rdma_event(INFO, "cancelling idle timer\n");
 	cancel_delayed_work_sync(&info->idle_timer_work);
-	log_rdma_event(INFO, "cancelling send immediate work\n");
-	cancel_delayed_work_sync(&info->send_immediate_work);
 
 	log_rdma_event(INFO, "wait for all send posted to IB to finish\n");
 	wait_event(info->wait_send_pending,
 		atomic_read(&info->send_pending) == 0);
-	wait_event(info->wait_send_payload_pending,
-		atomic_read(&info->send_payload_pending) == 0);
 
 	/* It's not posssible for upper layer to get to reassembly */
 	log_rdma_event(INFO, "drain the reassembly queue\n");
@@ -1744,15 +1679,13 @@ static struct smbd_connection *_smbd_get_connection(
 
 	init_waitqueue_head(&info->wait_send_queue);
 	INIT_DELAYED_WORK(&info->idle_timer_work, idle_connection_timer);
-	INIT_DELAYED_WORK(&info->send_immediate_work, send_immediate_work);
 	queue_delayed_work(info->workqueue, &info->idle_timer_work,
 		info->keep_alive_interval*HZ);
 
 	init_waitqueue_head(&info->wait_send_pending);
 	atomic_set(&info->send_pending, 0);
 
-	init_waitqueue_head(&info->wait_send_payload_pending);
-	atomic_set(&info->send_payload_pending, 0);
+	init_waitqueue_head(&info->wait_post_send);
 
 	INIT_WORK(&info->disconnect_work, smbd_disconnect_rdma_work);
 	INIT_WORK(&info->post_send_credits_work, smbd_post_send_credits);
@@ -2226,8 +2159,8 @@ int smbd_send(struct TCP_Server_Info *server,
 	 * that means all the I/Os have been out and we are good to return
 	 */
 
-	wait_event(info->wait_send_payload_pending,
-		atomic_read(&info->send_payload_pending) == 0);
+	wait_event(info->wait_send_pending,
+		atomic_read(&info->send_pending) == 0);
 
 	return rc;
 }
diff --git a/fs/cifs/smbdirect.h b/fs/cifs/smbdirect.h
index 8ede915..a87fca8 100644
--- a/fs/cifs/smbdirect.h
+++ b/fs/cifs/smbdirect.h
@@ -114,8 +114,7 @@ struct smbd_connection {
 	/* Activity accoutning */
 	atomic_t send_pending;
 	wait_queue_head_t wait_send_pending;
-	atomic_t send_payload_pending;
-	wait_queue_head_t wait_send_payload_pending;
+	wait_queue_head_t wait_post_send;
 
 	/* Receive queue */
 	struct list_head receive_queue;
@@ -154,7 +153,6 @@ struct smbd_connection {
 
 	struct workqueue_struct *workqueue;
 	struct delayed_work idle_timer_work;
-	struct delayed_work send_immediate_work;
 
 	/* Memory pool for preallocating buffers */
 	/* request pool for RDMA send */
@@ -234,9 +232,6 @@ struct smbd_request {
 	struct smbd_connection *info;
 	struct ib_cqe cqe;
 
-	/* true if this request carries upper layer payload */
-	bool has_payload;
-
 	/* the SGE entries for this packet */
 	struct ib_sge sge[SMBDIRECT_MAX_SGE];
 	int num_sge;
diff --git a/fs/dax.c b/fs/dax.c
index 35da144..11b1672 100644
--- a/fs/dax.c
+++ b/fs/dax.c
@@ -1038,50 +1038,43 @@ static vm_fault_t dax_load_hole(struct xa_state *xas,
 	return ret;
 }
 
-static bool dax_range_is_aligned(struct block_device *bdev,
-				 unsigned int offset, unsigned int length)
+int dax_iomap_zero(loff_t pos, unsigned offset, unsigned size,
+		   struct iomap *iomap)
 {
-	unsigned short sector_size = bdev_logical_block_size(bdev);
+	sector_t sector = iomap_sector(iomap, pos & PAGE_MASK);
+	pgoff_t pgoff;
+	long rc, id;
+	void *kaddr;
+	bool page_aligned = false;
 
-	if (!IS_ALIGNED(offset, sector_size))
-		return false;
-	if (!IS_ALIGNED(length, sector_size))
-		return false;
 
-	return true;
-}
+	if (IS_ALIGNED(sector << SECTOR_SHIFT, PAGE_SIZE) &&
+	    IS_ALIGNED(size, PAGE_SIZE))
+		page_aligned = true;
 
-int __dax_zero_page_range(struct block_device *bdev,
-		struct dax_device *dax_dev, sector_t sector,
-		unsigned int offset, unsigned int size)
-{
-	if (dax_range_is_aligned(bdev, offset, size)) {
-		sector_t start_sector = sector + (offset >> 9);
+	rc = bdev_dax_pgoff(iomap->bdev, sector, PAGE_SIZE, &pgoff);
+	if (rc)
+		return rc;
 
-		return blkdev_issue_zeroout(bdev, start_sector,
-				size >> 9, GFP_NOFS, 0);
-	} else {
-		pgoff_t pgoff;
-		long rc, id;
-		void *kaddr;
+	id = dax_read_lock();
 
-		rc = bdev_dax_pgoff(bdev, sector, PAGE_SIZE, &pgoff);
-		if (rc)
-			return rc;
-
-		id = dax_read_lock();
-		rc = dax_direct_access(dax_dev, pgoff, 1, &kaddr, NULL);
-		if (rc < 0) {
-			dax_read_unlock(id);
-			return rc;
-		}
-		memset(kaddr + offset, 0, size);
-		dax_flush(dax_dev, kaddr + offset, size);
+	if (page_aligned)
+		rc = dax_zero_page_range(iomap->dax_dev, pgoff,
+					 size >> PAGE_SHIFT);
+	else
+		rc = dax_direct_access(iomap->dax_dev, pgoff, 1, &kaddr, NULL);
+	if (rc < 0) {
 		dax_read_unlock(id);
+		return rc;
 	}
+
+	if (!page_aligned) {
+		memset(kaddr + offset, 0, size);
+		dax_flush(iomap->dax_dev, kaddr + offset, size);
+	}
+	dax_read_unlock(id);
 	return 0;
 }
-EXPORT_SYMBOL_GPL(__dax_zero_page_range);
 
 static loff_t
 dax_iomap_actor(struct inode *inode, loff_t pos, loff_t length, void *data,
diff --git a/fs/eventpoll.c b/fs/eventpoll.c
index eee3c92..8c59664 100644
--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c
@@ -218,13 +218,18 @@ struct eventpoll {
 	struct file *file;
 
 	/* used to optimize loop detection check */
-	int visited;
 	struct list_head visited_list_link;
+	int visited;
 
 #ifdef CONFIG_NET_RX_BUSY_POLL
 	/* used to track busy poll napi_id */
 	unsigned int napi_id;
 #endif
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+	/* tracks wakeup nests for lockdep validation */
+	u8 nests;
+#endif
 };
 
 /* Wait structure used by the poll hooks */
@@ -545,30 +550,47 @@ static int ep_call_nested(struct nested_calls *ncalls,
  */
 #ifdef CONFIG_DEBUG_LOCK_ALLOC
 
-static DEFINE_PER_CPU(int, wakeup_nest);
-
-static void ep_poll_safewake(wait_queue_head_t *wq)
+static void ep_poll_safewake(struct eventpoll *ep, struct epitem *epi)
 {
+	struct eventpoll *ep_src;
 	unsigned long flags;
-	int subclass;
+	u8 nests = 0;
 
-	local_irq_save(flags);
-	preempt_disable();
-	subclass = __this_cpu_read(wakeup_nest);
-	spin_lock_nested(&wq->lock, subclass + 1);
-	__this_cpu_inc(wakeup_nest);
-	wake_up_locked_poll(wq, POLLIN);
-	__this_cpu_dec(wakeup_nest);
-	spin_unlock(&wq->lock);
-	local_irq_restore(flags);
-	preempt_enable();
+	/*
+	 * To set the subclass or nesting level for spin_lock_irqsave_nested()
+	 * it might be natural to create a per-cpu nest count. However, since
+	 * we can recurse on ep->poll_wait.lock, and a non-raw spinlock can
+	 * schedule() in the -rt kernel, the per-cpu variable are no longer
+	 * protected. Thus, we are introducing a per eventpoll nest field.
+	 * If we are not being call from ep_poll_callback(), epi is NULL and
+	 * we are at the first level of nesting, 0. Otherwise, we are being
+	 * called from ep_poll_callback() and if a previous wakeup source is
+	 * not an epoll file itself, we are at depth 1 since the wakeup source
+	 * is depth 0. If the wakeup source is a previous epoll file in the
+	 * wakeup chain then we use its nests value and record ours as
+	 * nests + 1. The previous epoll file nests value is stable since its
+	 * already holding its own poll_wait.lock.
+	 */
+	if (epi) {
+		if ((is_file_epoll(epi->ffd.file))) {
+			ep_src = epi->ffd.file->private_data;
+			nests = ep_src->nests;
+		} else {
+			nests = 1;
+		}
+	}
+	spin_lock_irqsave_nested(&ep->poll_wait.lock, flags, nests);
+	ep->nests = nests + 1;
+	wake_up_locked_poll(&ep->poll_wait, EPOLLIN);
+	ep->nests = 0;
+	spin_unlock_irqrestore(&ep->poll_wait.lock, flags);
 }
 
 #else
 
-static void ep_poll_safewake(wait_queue_head_t *wq)
+static void ep_poll_safewake(struct eventpoll *ep, struct epitem *epi)
 {
-	wake_up_poll(wq, EPOLLIN);
+	wake_up_poll(&ep->poll_wait, EPOLLIN);
 }
 
 #endif
@@ -789,7 +811,7 @@ static void ep_free(struct eventpoll *ep)
 
 	/* We need to release all tasks waiting for these file */
 	if (waitqueue_active(&ep->poll_wait))
-		ep_poll_safewake(&ep->poll_wait);
+		ep_poll_safewake(ep, NULL);
 
 	/*
 	 * We need to lock this because we could be hit by
@@ -1258,7 +1280,7 @@ static int ep_poll_callback(wait_queue_entry_t *wait, unsigned mode, int sync, v
 
 	/* We have to call this outside the lock */
 	if (pwake)
-		ep_poll_safewake(&ep->poll_wait);
+		ep_poll_safewake(ep, epi);
 
 	if (!(epi->event.events & EPOLLEXCLUSIVE))
 		ewake = 1;
@@ -1562,7 +1584,7 @@ static int ep_insert(struct eventpoll *ep, const struct epoll_event *event,
 
 	/* We have to call this outside the lock */
 	if (pwake)
-		ep_poll_safewake(&ep->poll_wait);
+		ep_poll_safewake(ep, NULL);
 
 	return 0;
 
@@ -1666,7 +1688,7 @@ static int ep_modify(struct eventpoll *ep, struct epitem *epi,
 
 	/* We have to call this outside the lock */
 	if (pwake)
-		ep_poll_safewake(&ep->poll_wait);
+		ep_poll_safewake(ep, NULL);
 
 	return 0;
 }
diff --git a/fs/exfat/Kconfig b/fs/exfat/Kconfig
new file mode 100644
index 0000000..2d3636d
--- /dev/null
+++ b/fs/exfat/Kconfig
@@ -0,0 +1,21 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+config EXFAT_FS
+	tristate "exFAT filesystem support"
+	select NLS
+	help
+	  This allows you to mount devices formatted with the exFAT file system.
+	  exFAT is typically used on SD-Cards or USB sticks.
+
+	  To compile this as a module, choose M here: the module will be called
+	  exfat.
+
+config EXFAT_DEFAULT_IOCHARSET
+	string "Default iocharset for exFAT"
+	default "utf8"
+	depends on EXFAT_FS
+	help
+	  Set this to the default input/output character set to use for
+	  converting between the encoding is used for user visible filename and
+	  UTF-16 character that exfat filesystem use, and can be overridden with
+	  the "iocharset" mount option for exFAT filesystems.
diff --git a/fs/exfat/Makefile b/fs/exfat/Makefile
new file mode 100644
index 0000000..ed51926
--- /dev/null
+++ b/fs/exfat/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# Makefile for the linux exFAT filesystem support.
+#
+obj-$(CONFIG_EXFAT_FS) += exfat.o
+
+exfat-y	:= inode.o namei.o dir.o super.o fatent.o cache.o nls.o misc.o \
+	   file.o balloc.o
diff --git a/fs/exfat/balloc.c b/fs/exfat/balloc.c
new file mode 100644
index 0000000..6a04cc0
--- /dev/null
+++ b/fs/exfat/balloc.c
@@ -0,0 +1,280 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Copyright (C) 2012-2013 Samsung Electronics Co., Ltd.
+ */
+
+#include <linux/blkdev.h>
+#include <linux/slab.h>
+#include <linux/buffer_head.h>
+
+#include "exfat_raw.h"
+#include "exfat_fs.h"
+
+static const unsigned char free_bit[] = {
+	0, 1, 0, 2, 0, 1, 0, 3, 0, 1, 0, 2, 0, 1, 0, 4, 0, 1, 0, 2,/*  0 ~  19*/
+	0, 1, 0, 3, 0, 1, 0, 2, 0, 1, 0, 5, 0, 1, 0, 2, 0, 1, 0, 3,/* 20 ~  39*/
+	0, 1, 0, 2, 0, 1, 0, 4, 0, 1, 0, 2, 0, 1, 0, 3, 0, 1, 0, 2,/* 40 ~  59*/
+	0, 1, 0, 6, 0, 1, 0, 2, 0, 1, 0, 3, 0, 1, 0, 2, 0, 1, 0, 4,/* 60 ~  79*/
+	0, 1, 0, 2, 0, 1, 0, 3, 0, 1, 0, 2, 0, 1, 0, 5, 0, 1, 0, 2,/* 80 ~  99*/
+	0, 1, 0, 3, 0, 1, 0, 2, 0, 1, 0, 4, 0, 1, 0, 2, 0, 1, 0, 3,/*100 ~ 119*/
+	0, 1, 0, 2, 0, 1, 0, 7, 0, 1, 0, 2, 0, 1, 0, 3, 0, 1, 0, 2,/*120 ~ 139*/
+	0, 1, 0, 4, 0, 1, 0, 2, 0, 1, 0, 3, 0, 1, 0, 2, 0, 1, 0, 5,/*140 ~ 159*/
+	0, 1, 0, 2, 0, 1, 0, 3, 0, 1, 0, 2, 0, 1, 0, 4, 0, 1, 0, 2,/*160 ~ 179*/
+	0, 1, 0, 3, 0, 1, 0, 2, 0, 1, 0, 6, 0, 1, 0, 2, 0, 1, 0, 3,/*180 ~ 199*/
+	0, 1, 0, 2, 0, 1, 0, 4, 0, 1, 0, 2, 0, 1, 0, 3, 0, 1, 0, 2,/*200 ~ 219*/
+	0, 1, 0, 5, 0, 1, 0, 2, 0, 1, 0, 3, 0, 1, 0, 2, 0, 1, 0, 4,/*220 ~ 239*/
+	0, 1, 0, 2, 0, 1, 0, 3, 0, 1, 0, 2, 0, 1, 0                /*240 ~ 254*/
+};
+
+static const unsigned char used_bit[] = {
+	0, 1, 1, 2, 1, 2, 2, 3, 1, 2, 2, 3, 2, 3, 3, 4, 1, 2, 2, 3,/*  0 ~  19*/
+	2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5, 1, 2, 2, 3, 2, 3, 3, 4,/* 20 ~  39*/
+	2, 3, 3, 4, 3, 4, 4, 5, 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5,/* 40 ~  59*/
+	4, 5, 5, 6, 1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5,/* 60 ~  79*/
+	2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6, 2, 3, 3, 4,/* 80 ~  99*/
+	3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6, 3, 4, 4, 5, 4, 5, 5, 6,/*100 ~ 119*/
+	4, 5, 5, 6, 5, 6, 6, 7, 1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4,/*120 ~ 139*/
+	3, 4, 4, 5, 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,/*140 ~ 159*/
+	2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6, 3, 4, 4, 5,/*160 ~ 179*/
+	4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7, 2, 3, 3, 4, 3, 4, 4, 5,/*180 ~ 199*/
+	3, 4, 4, 5, 4, 5, 5, 6, 3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6,/*200 ~ 219*/
+	5, 6, 6, 7, 3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7,/*220 ~ 239*/
+	4, 5, 5, 6, 5, 6, 6, 7, 5, 6, 6, 7, 6, 7, 7, 8             /*240 ~ 255*/
+};
+
+/*
+ *  Allocation Bitmap Management Functions
+ */
+static int exfat_allocate_bitmap(struct super_block *sb,
+		struct exfat_dentry *ep)
+{
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+	long long map_size;
+	unsigned int i, need_map_size;
+	sector_t sector;
+
+	sbi->map_clu = le32_to_cpu(ep->dentry.bitmap.start_clu);
+	map_size = le64_to_cpu(ep->dentry.bitmap.size);
+	need_map_size = ((EXFAT_DATA_CLUSTER_COUNT(sbi) - 1) / BITS_PER_BYTE)
+		+ 1;
+	if (need_map_size != map_size) {
+		exfat_msg(sb, KERN_ERR,
+				"bogus allocation bitmap size(need : %u, cur : %lld)",
+				need_map_size, map_size);
+		/*
+		 * Only allowed when bogus allocation
+		 * bitmap size is large
+		 */
+		if (need_map_size > map_size)
+			return -EIO;
+	}
+	sbi->map_sectors = ((need_map_size - 1) >>
+			(sb->s_blocksize_bits)) + 1;
+	sbi->vol_amap = kmalloc_array(sbi->map_sectors,
+				sizeof(struct buffer_head *), GFP_KERNEL);
+	if (!sbi->vol_amap)
+		return -ENOMEM;
+
+	sector = exfat_cluster_to_sector(sbi, sbi->map_clu);
+	for (i = 0; i < sbi->map_sectors; i++) {
+		sbi->vol_amap[i] = sb_bread(sb, sector + i);
+		if (!sbi->vol_amap[i]) {
+			/* release all buffers and free vol_amap */
+			int j = 0;
+
+			while (j < i)
+				brelse(sbi->vol_amap[j++]);
+
+			kfree(sbi->vol_amap);
+			sbi->vol_amap = NULL;
+			return -EIO;
+		}
+	}
+
+	sbi->pbr_bh = NULL;
+	return 0;
+}
+
+int exfat_load_bitmap(struct super_block *sb)
+{
+	unsigned int i, type;
+	struct exfat_chain clu;
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+
+	exfat_chain_set(&clu, sbi->root_dir, 0, ALLOC_FAT_CHAIN);
+	while (clu.dir != EXFAT_EOF_CLUSTER) {
+		for (i = 0; i < sbi->dentries_per_clu; i++) {
+			struct exfat_dentry *ep;
+			struct buffer_head *bh;
+
+			ep = exfat_get_dentry(sb, &clu, i, &bh, NULL);
+			if (!ep)
+				return -EIO;
+
+			type = exfat_get_entry_type(ep);
+			if (type == TYPE_UNUSED)
+				break;
+			if (type != TYPE_BITMAP)
+				continue;
+			if (ep->dentry.bitmap.flags == 0x0) {
+				int err;
+
+				err = exfat_allocate_bitmap(sb, ep);
+				brelse(bh);
+				return err;
+			}
+			brelse(bh);
+		}
+
+		if (exfat_get_next_cluster(sb, &clu.dir))
+			return -EIO;
+	}
+
+	return -EINVAL;
+}
+
+void exfat_free_bitmap(struct exfat_sb_info *sbi)
+{
+	int i;
+
+	brelse(sbi->pbr_bh);
+
+	for (i = 0; i < sbi->map_sectors; i++)
+		__brelse(sbi->vol_amap[i]);
+
+	kfree(sbi->vol_amap);
+}
+
+/*
+ * If the value of "clu" is 0, it means cluster 2 which is the first cluster of
+ * the cluster heap.
+ */
+int exfat_set_bitmap(struct inode *inode, unsigned int clu)
+{
+	int i, b;
+	unsigned int ent_idx;
+	struct super_block *sb = inode->i_sb;
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+
+	WARN_ON(clu < EXFAT_FIRST_CLUSTER);
+	ent_idx = CLUSTER_TO_BITMAP_ENT(clu);
+	i = BITMAP_OFFSET_SECTOR_INDEX(sb, ent_idx);
+	b = BITMAP_OFFSET_BIT_IN_SECTOR(sb, ent_idx);
+
+	set_bit_le(b, sbi->vol_amap[i]->b_data);
+	exfat_update_bh(sb, sbi->vol_amap[i], IS_DIRSYNC(inode));
+	return 0;
+}
+
+/*
+ * If the value of "clu" is 0, it means cluster 2 which is the first cluster of
+ * the cluster heap.
+ */
+void exfat_clear_bitmap(struct inode *inode, unsigned int clu)
+{
+	int i, b;
+	unsigned int ent_idx;
+	struct super_block *sb = inode->i_sb;
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+	struct exfat_mount_options *opts = &sbi->options;
+
+	WARN_ON(clu < EXFAT_FIRST_CLUSTER);
+	ent_idx = CLUSTER_TO_BITMAP_ENT(clu);
+	i = BITMAP_OFFSET_SECTOR_INDEX(sb, ent_idx);
+	b = BITMAP_OFFSET_BIT_IN_SECTOR(sb, ent_idx);
+
+	clear_bit_le(b, sbi->vol_amap[i]->b_data);
+	exfat_update_bh(sb, sbi->vol_amap[i], IS_DIRSYNC(inode));
+
+	if (opts->discard) {
+		int ret_discard;
+
+		ret_discard = sb_issue_discard(sb,
+			exfat_cluster_to_sector(sbi, clu +
+						EXFAT_RESERVED_CLUSTERS),
+			(1 << sbi->sect_per_clus_bits), GFP_NOFS, 0);
+
+		if (ret_discard == -EOPNOTSUPP) {
+			exfat_msg(sb, KERN_ERR,
+				"discard not supported by device, disabling");
+			opts->discard = 0;
+		}
+	}
+}
+
+/*
+ * If the value of "clu" is 0, it means cluster 2 which is the first cluster of
+ * the cluster heap.
+ */
+unsigned int exfat_find_free_bitmap(struct super_block *sb, unsigned int clu)
+{
+	unsigned int i, map_i, map_b, ent_idx;
+	unsigned int clu_base, clu_free;
+	unsigned char k, clu_mask;
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+
+	WARN_ON(clu < EXFAT_FIRST_CLUSTER);
+	ent_idx = CLUSTER_TO_BITMAP_ENT(clu);
+	clu_base = BITMAP_ENT_TO_CLUSTER(ent_idx & ~(BITS_PER_BYTE_MASK));
+	clu_mask = IGNORED_BITS_REMAINED(clu, clu_base);
+
+	map_i = BITMAP_OFFSET_SECTOR_INDEX(sb, ent_idx);
+	map_b = BITMAP_OFFSET_BYTE_IN_SECTOR(sb, ent_idx);
+
+	for (i = EXFAT_FIRST_CLUSTER; i < sbi->num_clusters;
+	     i += BITS_PER_BYTE) {
+		k = *(sbi->vol_amap[map_i]->b_data + map_b);
+		if (clu_mask > 0) {
+			k |= clu_mask;
+			clu_mask = 0;
+		}
+		if (k < 0xFF) {
+			clu_free = clu_base + free_bit[k];
+			if (clu_free < sbi->num_clusters)
+				return clu_free;
+		}
+		clu_base += BITS_PER_BYTE;
+
+		if (++map_b >= sb->s_blocksize ||
+		    clu_base >= sbi->num_clusters) {
+			if (++map_i >= sbi->map_sectors) {
+				clu_base = EXFAT_FIRST_CLUSTER;
+				map_i = 0;
+			}
+			map_b = 0;
+		}
+	}
+
+	return EXFAT_EOF_CLUSTER;
+}
+
+int exfat_count_used_clusters(struct super_block *sb, unsigned int *ret_count)
+{
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+	unsigned int count = 0;
+	unsigned int i, map_i = 0, map_b = 0;
+	unsigned int total_clus = EXFAT_DATA_CLUSTER_COUNT(sbi);
+	unsigned int last_mask = total_clus & BITS_PER_BYTE_MASK;
+	unsigned char clu_bits;
+	const unsigned char last_bit_mask[] = {0, 0b00000001, 0b00000011,
+		0b00000111, 0b00001111, 0b00011111, 0b00111111, 0b01111111};
+
+	total_clus &= ~last_mask;
+	for (i = 0; i < total_clus; i += BITS_PER_BYTE) {
+		clu_bits = *(sbi->vol_amap[map_i]->b_data + map_b);
+		count += used_bit[clu_bits];
+		if (++map_b >= (unsigned int)sb->s_blocksize) {
+			map_i++;
+			map_b = 0;
+		}
+	}
+
+	if (last_mask) {
+		clu_bits = *(sbi->vol_amap[map_i]->b_data + map_b);
+		clu_bits &= last_bit_mask[last_mask];
+		count += used_bit[clu_bits];
+	}
+
+	*ret_count = count;
+	return 0;
+}
diff --git a/fs/exfat/cache.c b/fs/exfat/cache.c
new file mode 100644
index 0000000..03d0824
--- /dev/null
+++ b/fs/exfat/cache.c
@@ -0,0 +1,325 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  linux/fs/fat/cache.c
+ *
+ *  Written 1992,1993 by Werner Almesberger
+ *
+ *  Mar 1999. AV. Changed cache, so that it uses the starting cluster instead
+ *	of inode number.
+ *  May 1999. AV. Fixed the bogosity with FAT32 (read "FAT28"). Fscking lusers.
+ *  Copyright (C) 2012-2013 Samsung Electronics Co., Ltd.
+ */
+
+#include <linux/slab.h>
+#include <asm/unaligned.h>
+#include <linux/buffer_head.h>
+
+#include "exfat_raw.h"
+#include "exfat_fs.h"
+
+#define EXFAT_CACHE_VALID	0
+#define EXFAT_MAX_CACHE		16
+
+struct exfat_cache {
+	struct list_head cache_list;
+	unsigned int nr_contig;	/* number of contiguous clusters */
+	unsigned int fcluster;	/* cluster number in the file. */
+	unsigned int dcluster;	/* cluster number on disk. */
+};
+
+struct exfat_cache_id {
+	unsigned int id;
+	unsigned int nr_contig;
+	unsigned int fcluster;
+	unsigned int dcluster;
+};
+
+static struct kmem_cache *exfat_cachep;
+
+static void exfat_cache_init_once(void *c)
+{
+	struct exfat_cache *cache = (struct exfat_cache *)c;
+
+	INIT_LIST_HEAD(&cache->cache_list);
+}
+
+int exfat_cache_init(void)
+{
+	exfat_cachep = kmem_cache_create("exfat_cache",
+				sizeof(struct exfat_cache),
+				0, SLAB_RECLAIM_ACCOUNT|SLAB_MEM_SPREAD,
+				exfat_cache_init_once);
+	if (!exfat_cachep)
+		return -ENOMEM;
+	return 0;
+}
+
+void exfat_cache_shutdown(void)
+{
+	if (!exfat_cachep)
+		return;
+	kmem_cache_destroy(exfat_cachep);
+}
+
+void exfat_cache_init_inode(struct inode *inode)
+{
+	struct exfat_inode_info *ei = EXFAT_I(inode);
+
+	spin_lock_init(&ei->cache_lru_lock);
+	ei->nr_caches = 0;
+	ei->cache_valid_id = EXFAT_CACHE_VALID + 1;
+	INIT_LIST_HEAD(&ei->cache_lru);
+}
+
+static inline struct exfat_cache *exfat_cache_alloc(void)
+{
+	return kmem_cache_alloc(exfat_cachep, GFP_NOFS);
+}
+
+static inline void exfat_cache_free(struct exfat_cache *cache)
+{
+	WARN_ON(!list_empty(&cache->cache_list));
+	kmem_cache_free(exfat_cachep, cache);
+}
+
+static inline void exfat_cache_update_lru(struct inode *inode,
+		struct exfat_cache *cache)
+{
+	struct exfat_inode_info *ei = EXFAT_I(inode);
+
+	if (ei->cache_lru.next != &cache->cache_list)
+		list_move(&cache->cache_list, &ei->cache_lru);
+}
+
+static unsigned int exfat_cache_lookup(struct inode *inode,
+		unsigned int fclus, struct exfat_cache_id *cid,
+		unsigned int *cached_fclus, unsigned int *cached_dclus)
+{
+	struct exfat_inode_info *ei = EXFAT_I(inode);
+	static struct exfat_cache nohit = { .fcluster = 0, };
+	struct exfat_cache *hit = &nohit, *p;
+	unsigned int offset = EXFAT_EOF_CLUSTER;
+
+	spin_lock(&ei->cache_lru_lock);
+	list_for_each_entry(p, &ei->cache_lru, cache_list) {
+		/* Find the cache of "fclus" or nearest cache. */
+		if (p->fcluster <= fclus && hit->fcluster < p->fcluster) {
+			hit = p;
+			if (hit->fcluster + hit->nr_contig < fclus) {
+				offset = hit->nr_contig;
+			} else {
+				offset = fclus - hit->fcluster;
+				break;
+			}
+		}
+	}
+	if (hit != &nohit) {
+		exfat_cache_update_lru(inode, hit);
+
+		cid->id = ei->cache_valid_id;
+		cid->nr_contig = hit->nr_contig;
+		cid->fcluster = hit->fcluster;
+		cid->dcluster = hit->dcluster;
+		*cached_fclus = cid->fcluster + offset;
+		*cached_dclus = cid->dcluster + offset;
+	}
+	spin_unlock(&ei->cache_lru_lock);
+
+	return offset;
+}
+
+static struct exfat_cache *exfat_cache_merge(struct inode *inode,
+		struct exfat_cache_id *new)
+{
+	struct exfat_inode_info *ei = EXFAT_I(inode);
+	struct exfat_cache *p;
+
+	list_for_each_entry(p, &ei->cache_lru, cache_list) {
+		/* Find the same part as "new" in cluster-chain. */
+		if (p->fcluster == new->fcluster) {
+			if (new->nr_contig > p->nr_contig)
+				p->nr_contig = new->nr_contig;
+			return p;
+		}
+	}
+	return NULL;
+}
+
+static void exfat_cache_add(struct inode *inode,
+		struct exfat_cache_id *new)
+{
+	struct exfat_inode_info *ei = EXFAT_I(inode);
+	struct exfat_cache *cache, *tmp;
+
+	if (new->fcluster == EXFAT_EOF_CLUSTER) /* dummy cache */
+		return;
+
+	spin_lock(&ei->cache_lru_lock);
+	if (new->id != EXFAT_CACHE_VALID &&
+	    new->id != ei->cache_valid_id)
+		goto unlock;	/* this cache was invalidated */
+
+	cache = exfat_cache_merge(inode, new);
+	if (cache == NULL) {
+		if (ei->nr_caches < EXFAT_MAX_CACHE) {
+			ei->nr_caches++;
+			spin_unlock(&ei->cache_lru_lock);
+
+			tmp = exfat_cache_alloc();
+			if (!tmp) {
+				spin_lock(&ei->cache_lru_lock);
+				ei->nr_caches--;
+				spin_unlock(&ei->cache_lru_lock);
+				return;
+			}
+
+			spin_lock(&ei->cache_lru_lock);
+			cache = exfat_cache_merge(inode, new);
+			if (cache != NULL) {
+				ei->nr_caches--;
+				exfat_cache_free(tmp);
+				goto out_update_lru;
+			}
+			cache = tmp;
+		} else {
+			struct list_head *p = ei->cache_lru.prev;
+
+			cache = list_entry(p,
+					struct exfat_cache, cache_list);
+		}
+		cache->fcluster = new->fcluster;
+		cache->dcluster = new->dcluster;
+		cache->nr_contig = new->nr_contig;
+	}
+out_update_lru:
+	exfat_cache_update_lru(inode, cache);
+unlock:
+	spin_unlock(&ei->cache_lru_lock);
+}
+
+/*
+ * Cache invalidation occurs rarely, thus the LRU chain is not updated. It
+ * fixes itself after a while.
+ */
+static void __exfat_cache_inval_inode(struct inode *inode)
+{
+	struct exfat_inode_info *ei = EXFAT_I(inode);
+	struct exfat_cache *cache;
+
+	while (!list_empty(&ei->cache_lru)) {
+		cache = list_entry(ei->cache_lru.next,
+				   struct exfat_cache, cache_list);
+		list_del_init(&cache->cache_list);
+		ei->nr_caches--;
+		exfat_cache_free(cache);
+	}
+	/* Update. The copy of caches before this id is discarded. */
+	ei->cache_valid_id++;
+	if (ei->cache_valid_id == EXFAT_CACHE_VALID)
+		ei->cache_valid_id++;
+}
+
+void exfat_cache_inval_inode(struct inode *inode)
+{
+	struct exfat_inode_info *ei = EXFAT_I(inode);
+
+	spin_lock(&ei->cache_lru_lock);
+	__exfat_cache_inval_inode(inode);
+	spin_unlock(&ei->cache_lru_lock);
+}
+
+static inline int cache_contiguous(struct exfat_cache_id *cid,
+		unsigned int dclus)
+{
+	cid->nr_contig++;
+	return cid->dcluster + cid->nr_contig == dclus;
+}
+
+static inline void cache_init(struct exfat_cache_id *cid,
+		unsigned int fclus, unsigned int dclus)
+{
+	cid->id = EXFAT_CACHE_VALID;
+	cid->fcluster = fclus;
+	cid->dcluster = dclus;
+	cid->nr_contig = 0;
+}
+
+int exfat_get_cluster(struct inode *inode, unsigned int cluster,
+		unsigned int *fclus, unsigned int *dclus,
+		unsigned int *last_dclus, int allow_eof)
+{
+	struct super_block *sb = inode->i_sb;
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+	unsigned int limit = sbi->num_clusters;
+	struct exfat_inode_info *ei = EXFAT_I(inode);
+	struct exfat_cache_id cid;
+	unsigned int content;
+
+	if (ei->start_clu == EXFAT_FREE_CLUSTER) {
+		exfat_fs_error(sb,
+			"invalid access to exfat cache (entry 0x%08x)",
+			ei->start_clu);
+		return -EIO;
+	}
+
+	*fclus = 0;
+	*dclus = ei->start_clu;
+	*last_dclus = *dclus;
+
+	/*
+	 * Don`t use exfat_cache if zero offset or non-cluster allocation
+	 */
+	if (cluster == 0 || *dclus == EXFAT_EOF_CLUSTER)
+		return 0;
+
+	cache_init(&cid, EXFAT_EOF_CLUSTER, EXFAT_EOF_CLUSTER);
+
+	if (exfat_cache_lookup(inode, cluster, &cid, fclus, dclus) ==
+			EXFAT_EOF_CLUSTER) {
+		/*
+		 * dummy, always not contiguous
+		 * This is reinitialized by cache_init(), later.
+		 */
+		WARN_ON(cid.id != EXFAT_CACHE_VALID ||
+			cid.fcluster != EXFAT_EOF_CLUSTER ||
+			cid.dcluster != EXFAT_EOF_CLUSTER ||
+			cid.nr_contig != 0);
+	}
+
+	if (*fclus == cluster)
+		return 0;
+
+	while (*fclus < cluster) {
+		/* prevent the infinite loop of cluster chain */
+		if (*fclus > limit) {
+			exfat_fs_error(sb,
+				"detected the cluster chain loop (i_pos %u)",
+				(*fclus));
+			return -EIO;
+		}
+
+		if (exfat_ent_get(sb, *dclus, &content))
+			return -EIO;
+
+		*last_dclus = *dclus;
+		*dclus = content;
+		(*fclus)++;
+
+		if (content == EXFAT_EOF_CLUSTER) {
+			if (!allow_eof) {
+				exfat_fs_error(sb,
+				       "invalid cluster chain (i_pos %u, last_clus 0x%08x is EOF)",
+				       *fclus, (*last_dclus));
+				return -EIO;
+			}
+
+			break;
+		}
+
+		if (!cache_contiguous(&cid, *dclus))
+			cache_init(&cid, *fclus, *dclus);
+	}
+
+	exfat_cache_add(inode, &cid);
+	return 0;
+}
diff --git a/fs/exfat/dir.c b/fs/exfat/dir.c
new file mode 100644
index 0000000..4b91afb
--- /dev/null
+++ b/fs/exfat/dir.c
@@ -0,0 +1,1238 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2012-2013 Samsung Electronics Co., Ltd.
+ */
+
+#include <linux/slab.h>
+#include <linux/bio.h>
+#include <linux/buffer_head.h>
+
+#include "exfat_raw.h"
+#include "exfat_fs.h"
+
+static int exfat_extract_uni_name(struct exfat_dentry *ep,
+		unsigned short *uniname)
+{
+	int i, len = 0;
+
+	for (i = 0; i < EXFAT_FILE_NAME_LEN; i++) {
+		*uniname = le16_to_cpu(ep->dentry.name.unicode_0_14[i]);
+		if (*uniname == 0x0)
+			return len;
+		uniname++;
+		len++;
+	}
+
+	*uniname = 0x0;
+	return len;
+
+}
+
+static void exfat_get_uniname_from_ext_entry(struct super_block *sb,
+		struct exfat_chain *p_dir, int entry, unsigned short *uniname)
+{
+	int i;
+	struct exfat_dentry *ep;
+	struct exfat_entry_set_cache *es;
+
+	es = exfat_get_dentry_set(sb, p_dir, entry, ES_ALL_ENTRIES, &ep);
+	if (!es)
+		return;
+
+	if (es->num_entries < 3)
+		goto free_es;
+
+	ep += 2;
+
+	/*
+	 * First entry  : file entry
+	 * Second entry : stream-extension entry
+	 * Third entry  : first file-name entry
+	 * So, the index of first file-name dentry should start from 2.
+	 */
+	for (i = 2; i < es->num_entries; i++, ep++) {
+		/* end of name entry */
+		if (exfat_get_entry_type(ep) != TYPE_EXTEND)
+			goto free_es;
+
+		exfat_extract_uni_name(ep, uniname);
+		uniname += EXFAT_FILE_NAME_LEN;
+	}
+
+free_es:
+	kfree(es);
+}
+
+/* read a directory entry from the opened directory */
+static int exfat_readdir(struct inode *inode, struct exfat_dir_entry *dir_entry)
+{
+	int i, dentries_per_clu, dentries_per_clu_bits = 0;
+	unsigned int type, clu_offset;
+	sector_t sector;
+	struct exfat_chain dir, clu;
+	struct exfat_uni_name uni_name;
+	struct exfat_dentry *ep;
+	struct super_block *sb = inode->i_sb;
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+	struct exfat_inode_info *ei = EXFAT_I(inode);
+	unsigned int dentry = ei->rwoffset & 0xFFFFFFFF;
+	struct buffer_head *bh;
+
+	/* check if the given file ID is opened */
+	if (ei->type != TYPE_DIR)
+		return -EPERM;
+
+	if (ei->entry == -1)
+		exfat_chain_set(&dir, sbi->root_dir, 0, ALLOC_FAT_CHAIN);
+	else
+		exfat_chain_set(&dir, ei->start_clu,
+			EXFAT_B_TO_CLU(i_size_read(inode), sbi), ei->flags);
+
+	dentries_per_clu = sbi->dentries_per_clu;
+	dentries_per_clu_bits = ilog2(dentries_per_clu);
+
+	clu_offset = dentry >> dentries_per_clu_bits;
+	exfat_chain_dup(&clu, &dir);
+
+	if (clu.flags == ALLOC_NO_FAT_CHAIN) {
+		clu.dir += clu_offset;
+		clu.size -= clu_offset;
+	} else {
+		/* hint_information */
+		if (clu_offset > 0 && ei->hint_bmap.off != EXFAT_EOF_CLUSTER &&
+		    ei->hint_bmap.off > 0 && clu_offset >= ei->hint_bmap.off) {
+			clu_offset -= ei->hint_bmap.off;
+			clu.dir = ei->hint_bmap.clu;
+		}
+
+		while (clu_offset > 0) {
+			if (exfat_get_next_cluster(sb, &(clu.dir)))
+				return -EIO;
+
+			clu_offset--;
+		}
+	}
+
+	while (clu.dir != EXFAT_EOF_CLUSTER) {
+		i = dentry & (dentries_per_clu - 1);
+
+		for ( ; i < dentries_per_clu; i++, dentry++) {
+			ep = exfat_get_dentry(sb, &clu, i, &bh, &sector);
+			if (!ep)
+				return -EIO;
+
+			type = exfat_get_entry_type(ep);
+			if (type == TYPE_UNUSED) {
+				brelse(bh);
+				break;
+			}
+
+			if (type != TYPE_FILE && type != TYPE_DIR) {
+				brelse(bh);
+				continue;
+			}
+
+			dir_entry->attr = le16_to_cpu(ep->dentry.file.attr);
+			exfat_get_entry_time(sbi, &dir_entry->crtime,
+					ep->dentry.file.create_tz,
+					ep->dentry.file.create_time,
+					ep->dentry.file.create_date,
+					ep->dentry.file.create_time_ms);
+			exfat_get_entry_time(sbi, &dir_entry->mtime,
+					ep->dentry.file.modify_tz,
+					ep->dentry.file.modify_time,
+					ep->dentry.file.modify_date,
+					ep->dentry.file.modify_time_ms);
+			exfat_get_entry_time(sbi, &dir_entry->atime,
+					ep->dentry.file.access_tz,
+					ep->dentry.file.access_time,
+					ep->dentry.file.access_date,
+					0);
+
+			*uni_name.name = 0x0;
+			exfat_get_uniname_from_ext_entry(sb, &dir, dentry,
+				uni_name.name);
+			exfat_utf16_to_nls(sb, &uni_name,
+				dir_entry->namebuf.lfn,
+				dir_entry->namebuf.lfnbuf_len);
+			brelse(bh);
+
+			ep = exfat_get_dentry(sb, &clu, i + 1, &bh, NULL);
+			if (!ep)
+				return -EIO;
+			dir_entry->size =
+				le64_to_cpu(ep->dentry.stream.valid_size);
+			brelse(bh);
+
+			ei->hint_bmap.off = dentry >> dentries_per_clu_bits;
+			ei->hint_bmap.clu = clu.dir;
+
+			ei->rwoffset = ++dentry;
+			return 0;
+		}
+
+		if (clu.flags == ALLOC_NO_FAT_CHAIN) {
+			if (--clu.size > 0)
+				clu.dir++;
+			else
+				clu.dir = EXFAT_EOF_CLUSTER;
+		} else {
+			if (exfat_get_next_cluster(sb, &(clu.dir)))
+				return -EIO;
+		}
+	}
+
+	dir_entry->namebuf.lfn[0] = '\0';
+	ei->rwoffset = dentry;
+	return 0;
+}
+
+static void exfat_init_namebuf(struct exfat_dentry_namebuf *nb)
+{
+	nb->lfn = NULL;
+	nb->lfnbuf_len = 0;
+}
+
+static int exfat_alloc_namebuf(struct exfat_dentry_namebuf *nb)
+{
+	nb->lfn = __getname();
+	if (!nb->lfn)
+		return -ENOMEM;
+	nb->lfnbuf_len = MAX_VFSNAME_BUF_SIZE;
+	return 0;
+}
+
+static void exfat_free_namebuf(struct exfat_dentry_namebuf *nb)
+{
+	if (!nb->lfn)
+		return;
+
+	__putname(nb->lfn);
+	exfat_init_namebuf(nb);
+}
+
+/* skip iterating emit_dots when dir is empty */
+#define ITER_POS_FILLED_DOTS    (2)
+static int exfat_iterate(struct file *filp, struct dir_context *ctx)
+{
+	struct inode *inode = filp->f_path.dentry->d_inode;
+	struct super_block *sb = inode->i_sb;
+	struct inode *tmp;
+	struct exfat_dir_entry de;
+	struct exfat_dentry_namebuf *nb = &(de.namebuf);
+	struct exfat_inode_info *ei = EXFAT_I(inode);
+	unsigned long inum;
+	loff_t cpos, i_pos;
+	int err = 0, fake_offset = 0;
+
+	exfat_init_namebuf(nb);
+	mutex_lock(&EXFAT_SB(sb)->s_lock);
+
+	cpos = ctx->pos;
+	if (!dir_emit_dots(filp, ctx))
+		goto unlock;
+
+	if (ctx->pos == ITER_POS_FILLED_DOTS) {
+		cpos = 0;
+		fake_offset = 1;
+	}
+
+	if (cpos & (DENTRY_SIZE - 1)) {
+		err = -ENOENT;
+		goto unlock;
+	}
+
+	/* name buffer should be allocated before use */
+	err = exfat_alloc_namebuf(nb);
+	if (err)
+		goto unlock;
+get_new:
+	ei->rwoffset = EXFAT_B_TO_DEN(cpos);
+
+	if (cpos >= i_size_read(inode))
+		goto end_of_dir;
+
+	err = exfat_readdir(inode, &de);
+	if (err) {
+		/*
+		 * At least we tried to read a sector.  Move cpos to next sector
+		 * position (should be aligned).
+		 */
+		if (err == -EIO) {
+			cpos += 1 << (sb->s_blocksize_bits);
+			cpos &= ~(sb->s_blocksize - 1);
+		}
+
+		err = -EIO;
+		goto end_of_dir;
+	}
+
+	cpos = EXFAT_DEN_TO_B(ei->rwoffset);
+
+	if (!nb->lfn[0])
+		goto end_of_dir;
+
+	i_pos = ((loff_t)ei->start_clu << 32) |
+		((ei->rwoffset - 1) & 0xffffffff);
+	tmp = exfat_iget(sb, i_pos);
+	if (tmp) {
+		inum = tmp->i_ino;
+		iput(tmp);
+	} else {
+		inum = iunique(sb, EXFAT_ROOT_INO);
+	}
+
+	/*
+	 * Before calling dir_emit(), sb_lock should be released.
+	 * Because page fault can occur in dir_emit() when the size
+	 * of buffer given from user is larger than one page size.
+	 */
+	mutex_unlock(&EXFAT_SB(sb)->s_lock);
+	if (!dir_emit(ctx, nb->lfn, strlen(nb->lfn), inum,
+			(de.attr & ATTR_SUBDIR) ? DT_DIR : DT_REG))
+		goto out_unlocked;
+	mutex_lock(&EXFAT_SB(sb)->s_lock);
+	ctx->pos = cpos;
+	goto get_new;
+
+end_of_dir:
+	if (!cpos && fake_offset)
+		cpos = ITER_POS_FILLED_DOTS;
+	ctx->pos = cpos;
+unlock:
+	mutex_unlock(&EXFAT_SB(sb)->s_lock);
+out_unlocked:
+	/*
+	 * To improve performance, free namebuf after unlock sb_lock.
+	 * If namebuf is not allocated, this function do nothing
+	 */
+	exfat_free_namebuf(nb);
+	return err;
+}
+
+const struct file_operations exfat_dir_operations = {
+	.llseek		= generic_file_llseek,
+	.read		= generic_read_dir,
+	.iterate	= exfat_iterate,
+	.fsync		= generic_file_fsync,
+};
+
+int exfat_alloc_new_dir(struct inode *inode, struct exfat_chain *clu)
+{
+	int ret;
+
+	exfat_chain_set(clu, EXFAT_EOF_CLUSTER, 0, ALLOC_NO_FAT_CHAIN);
+
+	ret = exfat_alloc_cluster(inode, 1, clu);
+	if (ret)
+		return ret;
+
+	return exfat_zeroed_cluster(inode, clu->dir);
+}
+
+int exfat_calc_num_entries(struct exfat_uni_name *p_uniname)
+{
+	int len;
+
+	len = p_uniname->name_len;
+	if (len == 0)
+		return -EINVAL;
+
+	/* 1 file entry + 1 stream entry + name entries */
+	return ((len - 1) / EXFAT_FILE_NAME_LEN + 3);
+}
+
+unsigned int exfat_get_entry_type(struct exfat_dentry *ep)
+{
+	if (ep->type == EXFAT_UNUSED)
+		return TYPE_UNUSED;
+	if (IS_EXFAT_DELETED(ep->type))
+		return TYPE_DELETED;
+	if (ep->type == EXFAT_INVAL)
+		return TYPE_INVALID;
+	if (IS_EXFAT_CRITICAL_PRI(ep->type)) {
+		if (ep->type == EXFAT_BITMAP)
+			return TYPE_BITMAP;
+		if (ep->type == EXFAT_UPCASE)
+			return TYPE_UPCASE;
+		if (ep->type == EXFAT_VOLUME)
+			return TYPE_VOLUME;
+		if (ep->type == EXFAT_FILE) {
+			if (le16_to_cpu(ep->dentry.file.attr) & ATTR_SUBDIR)
+				return TYPE_DIR;
+			return TYPE_FILE;
+		}
+		return TYPE_CRITICAL_PRI;
+	}
+	if (IS_EXFAT_BENIGN_PRI(ep->type)) {
+		if (ep->type == EXFAT_GUID)
+			return TYPE_GUID;
+		if (ep->type == EXFAT_PADDING)
+			return TYPE_PADDING;
+		if (ep->type == EXFAT_ACLTAB)
+			return TYPE_ACLTAB;
+		return TYPE_BENIGN_PRI;
+	}
+	if (IS_EXFAT_CRITICAL_SEC(ep->type)) {
+		if (ep->type == EXFAT_STREAM)
+			return TYPE_STREAM;
+		if (ep->type == EXFAT_NAME)
+			return TYPE_EXTEND;
+		if (ep->type == EXFAT_ACL)
+			return TYPE_ACL;
+		return TYPE_CRITICAL_SEC;
+	}
+	return TYPE_BENIGN_SEC;
+}
+
+static void exfat_set_entry_type(struct exfat_dentry *ep, unsigned int type)
+{
+	if (type == TYPE_UNUSED) {
+		ep->type = EXFAT_UNUSED;
+	} else if (type == TYPE_DELETED) {
+		ep->type &= EXFAT_DELETE;
+	} else if (type == TYPE_STREAM) {
+		ep->type = EXFAT_STREAM;
+	} else if (type == TYPE_EXTEND) {
+		ep->type = EXFAT_NAME;
+	} else if (type == TYPE_BITMAP) {
+		ep->type = EXFAT_BITMAP;
+	} else if (type == TYPE_UPCASE) {
+		ep->type = EXFAT_UPCASE;
+	} else if (type == TYPE_VOLUME) {
+		ep->type = EXFAT_VOLUME;
+	} else if (type == TYPE_DIR) {
+		ep->type = EXFAT_FILE;
+		ep->dentry.file.attr = cpu_to_le16(ATTR_SUBDIR);
+	} else if (type == TYPE_FILE) {
+		ep->type = EXFAT_FILE;
+		ep->dentry.file.attr = cpu_to_le16(ATTR_ARCHIVE);
+	}
+}
+
+static void exfat_init_stream_entry(struct exfat_dentry *ep,
+		unsigned char flags, unsigned int start_clu,
+		unsigned long long size)
+{
+	exfat_set_entry_type(ep, TYPE_STREAM);
+	ep->dentry.stream.flags = flags;
+	ep->dentry.stream.start_clu = cpu_to_le32(start_clu);
+	ep->dentry.stream.valid_size = cpu_to_le64(size);
+	ep->dentry.stream.size = cpu_to_le64(size);
+}
+
+static void exfat_init_name_entry(struct exfat_dentry *ep,
+		unsigned short *uniname)
+{
+	int i;
+
+	exfat_set_entry_type(ep, TYPE_EXTEND);
+	ep->dentry.name.flags = 0x0;
+
+	for (i = 0; i < EXFAT_FILE_NAME_LEN; i++) {
+		ep->dentry.name.unicode_0_14[i] = cpu_to_le16(*uniname);
+		if (*uniname == 0x0)
+			break;
+		uniname++;
+	}
+}
+
+int exfat_init_dir_entry(struct inode *inode, struct exfat_chain *p_dir,
+		int entry, unsigned int type, unsigned int start_clu,
+		unsigned long long size)
+{
+	struct super_block *sb = inode->i_sb;
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+	struct timespec64 ts = current_time(inode);
+	sector_t sector;
+	struct exfat_dentry *ep;
+	struct buffer_head *bh;
+
+	/*
+	 * We cannot use exfat_get_dentry_set here because file ep is not
+	 * initialized yet.
+	 */
+	ep = exfat_get_dentry(sb, p_dir, entry, &bh, &sector);
+	if (!ep)
+		return -EIO;
+
+	exfat_set_entry_type(ep, type);
+	exfat_set_entry_time(sbi, &ts,
+			&ep->dentry.file.create_tz,
+			&ep->dentry.file.create_time,
+			&ep->dentry.file.create_date,
+			&ep->dentry.file.create_time_ms);
+	exfat_set_entry_time(sbi, &ts,
+			&ep->dentry.file.modify_tz,
+			&ep->dentry.file.modify_time,
+			&ep->dentry.file.modify_date,
+			&ep->dentry.file.modify_time_ms);
+	exfat_set_entry_time(sbi, &ts,
+			&ep->dentry.file.access_tz,
+			&ep->dentry.file.access_time,
+			&ep->dentry.file.access_date,
+			NULL);
+
+	exfat_update_bh(sb, bh, IS_DIRSYNC(inode));
+	brelse(bh);
+
+	ep = exfat_get_dentry(sb, p_dir, entry + 1, &bh, &sector);
+	if (!ep)
+		return -EIO;
+
+	exfat_init_stream_entry(ep,
+		(type == TYPE_FILE) ? ALLOC_FAT_CHAIN : ALLOC_NO_FAT_CHAIN,
+		start_clu, size);
+	exfat_update_bh(sb, bh, IS_DIRSYNC(inode));
+	brelse(bh);
+
+	return 0;
+}
+
+int exfat_update_dir_chksum(struct inode *inode, struct exfat_chain *p_dir,
+		int entry)
+{
+	struct super_block *sb = inode->i_sb;
+	int ret = 0;
+	int i, num_entries;
+	sector_t sector;
+	unsigned short chksum;
+	struct exfat_dentry *ep, *fep;
+	struct buffer_head *fbh, *bh;
+
+	fep = exfat_get_dentry(sb, p_dir, entry, &fbh, &sector);
+	if (!fep)
+		return -EIO;
+
+	num_entries = fep->dentry.file.num_ext + 1;
+	chksum = exfat_calc_chksum_2byte(fep, DENTRY_SIZE, 0, CS_DIR_ENTRY);
+
+	for (i = 1; i < num_entries; i++) {
+		ep = exfat_get_dentry(sb, p_dir, entry + i, &bh, NULL);
+		if (!ep) {
+			ret = -EIO;
+			goto release_fbh;
+		}
+		chksum = exfat_calc_chksum_2byte(ep, DENTRY_SIZE, chksum,
+				CS_DEFAULT);
+		brelse(bh);
+	}
+
+	fep->dentry.file.checksum = cpu_to_le16(chksum);
+	exfat_update_bh(sb, fbh, IS_DIRSYNC(inode));
+release_fbh:
+	brelse(fbh);
+	return ret;
+}
+
+int exfat_init_ext_entry(struct inode *inode, struct exfat_chain *p_dir,
+		int entry, int num_entries, struct exfat_uni_name *p_uniname)
+{
+	struct super_block *sb = inode->i_sb;
+	int i;
+	sector_t sector;
+	unsigned short *uniname = p_uniname->name;
+	struct exfat_dentry *ep;
+	struct buffer_head *bh;
+	int sync = IS_DIRSYNC(inode);
+
+	ep = exfat_get_dentry(sb, p_dir, entry, &bh, &sector);
+	if (!ep)
+		return -EIO;
+
+	ep->dentry.file.num_ext = (unsigned char)(num_entries - 1);
+	exfat_update_bh(sb, bh, sync);
+	brelse(bh);
+
+	ep = exfat_get_dentry(sb, p_dir, entry + 1, &bh, &sector);
+	if (!ep)
+		return -EIO;
+
+	ep->dentry.stream.name_len = p_uniname->name_len;
+	ep->dentry.stream.name_hash = cpu_to_le16(p_uniname->name_hash);
+	exfat_update_bh(sb, bh, sync);
+	brelse(bh);
+
+	for (i = EXFAT_FIRST_CLUSTER; i < num_entries; i++) {
+		ep = exfat_get_dentry(sb, p_dir, entry + i, &bh, &sector);
+		if (!ep)
+			return -EIO;
+
+		exfat_init_name_entry(ep, uniname);
+		exfat_update_bh(sb, bh, sync);
+		brelse(bh);
+		uniname += EXFAT_FILE_NAME_LEN;
+	}
+
+	exfat_update_dir_chksum(inode, p_dir, entry);
+	return 0;
+}
+
+int exfat_remove_entries(struct inode *inode, struct exfat_chain *p_dir,
+		int entry, int order, int num_entries)
+{
+	struct super_block *sb = inode->i_sb;
+	int i;
+	sector_t sector;
+	struct exfat_dentry *ep;
+	struct buffer_head *bh;
+
+	for (i = order; i < num_entries; i++) {
+		ep = exfat_get_dentry(sb, p_dir, entry + i, &bh, &sector);
+		if (!ep)
+			return -EIO;
+
+		exfat_set_entry_type(ep, TYPE_DELETED);
+		exfat_update_bh(sb, bh, IS_DIRSYNC(inode));
+		brelse(bh);
+	}
+
+	return 0;
+}
+
+int exfat_update_dir_chksum_with_entry_set(struct super_block *sb,
+		struct exfat_entry_set_cache *es, int sync)
+{
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+	struct buffer_head *bh;
+	sector_t sec = es->sector;
+	unsigned int off = es->offset;
+	int chksum_type = CS_DIR_ENTRY, i, num_entries = es->num_entries;
+	unsigned int buf_off = (off - es->offset);
+	unsigned int remaining_byte_in_sector, copy_entries, clu;
+	unsigned short chksum = 0;
+
+	for (i = 0; i < num_entries; i++) {
+		chksum = exfat_calc_chksum_2byte(&es->entries[i], DENTRY_SIZE,
+			chksum, chksum_type);
+		chksum_type = CS_DEFAULT;
+	}
+
+	es->entries[0].dentry.file.checksum = cpu_to_le16(chksum);
+
+	while (num_entries) {
+		/* write per sector base */
+		remaining_byte_in_sector = (1 << sb->s_blocksize_bits) - off;
+		copy_entries = min_t(int,
+			EXFAT_B_TO_DEN(remaining_byte_in_sector),
+			num_entries);
+		bh = sb_bread(sb, sec);
+		if (!bh)
+			goto err_out;
+		memcpy(bh->b_data + off,
+			(unsigned char *)&es->entries[0] + buf_off,
+			EXFAT_DEN_TO_B(copy_entries));
+		exfat_update_bh(sb, bh, sync);
+		brelse(bh);
+		num_entries -= copy_entries;
+
+		if (num_entries) {
+			/* get next sector */
+			if (exfat_is_last_sector_in_cluster(sbi, sec)) {
+				clu = exfat_sector_to_cluster(sbi, sec);
+				if (es->alloc_flag == ALLOC_NO_FAT_CHAIN)
+					clu++;
+				else if (exfat_get_next_cluster(sb, &clu))
+					goto err_out;
+				sec = exfat_cluster_to_sector(sbi, clu);
+			} else {
+				sec++;
+			}
+			off = 0;
+			buf_off += EXFAT_DEN_TO_B(copy_entries);
+		}
+	}
+
+	return 0;
+err_out:
+	return -EIO;
+}
+
+static int exfat_walk_fat_chain(struct super_block *sb,
+		struct exfat_chain *p_dir, unsigned int byte_offset,
+		unsigned int *clu)
+{
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+	unsigned int clu_offset;
+	unsigned int cur_clu;
+
+	clu_offset = EXFAT_B_TO_CLU(byte_offset, sbi);
+	cur_clu = p_dir->dir;
+
+	if (p_dir->flags == ALLOC_NO_FAT_CHAIN) {
+		cur_clu += clu_offset;
+	} else {
+		while (clu_offset > 0) {
+			if (exfat_get_next_cluster(sb, &cur_clu))
+				return -EIO;
+			if (cur_clu == EXFAT_EOF_CLUSTER) {
+				exfat_fs_error(sb,
+					"invalid dentry access beyond EOF (clu : %u, eidx : %d)",
+					p_dir->dir,
+					EXFAT_B_TO_DEN(byte_offset));
+				return -EIO;
+			}
+			clu_offset--;
+		}
+	}
+
+	*clu = cur_clu;
+	return 0;
+}
+
+int exfat_find_location(struct super_block *sb, struct exfat_chain *p_dir,
+		int entry, sector_t *sector, int *offset)
+{
+	int ret;
+	unsigned int off, clu = 0;
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+
+	off = EXFAT_DEN_TO_B(entry);
+
+	ret = exfat_walk_fat_chain(sb, p_dir, off, &clu);
+	if (ret)
+		return ret;
+
+	/* byte offset in cluster */
+	off = EXFAT_CLU_OFFSET(off, sbi);
+
+	/* byte offset in sector    */
+	*offset = EXFAT_BLK_OFFSET(off, sb);
+
+	/* sector offset in cluster */
+	*sector = EXFAT_B_TO_BLK(off, sb);
+	*sector += exfat_cluster_to_sector(sbi, clu);
+	return 0;
+}
+
+#define EXFAT_MAX_RA_SIZE     (128*1024)
+static int exfat_dir_readahead(struct super_block *sb, sector_t sec)
+{
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+	struct buffer_head *bh;
+	unsigned int max_ra_count = EXFAT_MAX_RA_SIZE >> sb->s_blocksize_bits;
+	unsigned int page_ra_count = PAGE_SIZE >> sb->s_blocksize_bits;
+	unsigned int adj_ra_count = max(sbi->sect_per_clus, page_ra_count);
+	unsigned int ra_count = min(adj_ra_count, max_ra_count);
+
+	/* Read-ahead is not required */
+	if (sbi->sect_per_clus == 1)
+		return 0;
+
+	if (sec < sbi->data_start_sector) {
+		exfat_msg(sb, KERN_ERR,
+			"requested sector is invalid(sect:%llu, root:%llu)",
+			(unsigned long long)sec, sbi->data_start_sector);
+		return -EIO;
+	}
+
+	/* Not sector aligned with ra_count, resize ra_count to page size */
+	if ((sec - sbi->data_start_sector) & (ra_count - 1))
+		ra_count = page_ra_count;
+
+	bh = sb_find_get_block(sb, sec);
+	if (!bh || !buffer_uptodate(bh)) {
+		unsigned int i;
+
+		for (i = 0; i < ra_count; i++)
+			sb_breadahead(sb, (sector_t)(sec + i));
+	}
+	brelse(bh);
+	return 0;
+}
+
+struct exfat_dentry *exfat_get_dentry(struct super_block *sb,
+		struct exfat_chain *p_dir, int entry, struct buffer_head **bh,
+		sector_t *sector)
+{
+	unsigned int dentries_per_page = EXFAT_B_TO_DEN(PAGE_SIZE);
+	int off;
+	sector_t sec;
+
+	if (p_dir->dir == DIR_DELETED) {
+		exfat_msg(sb, KERN_ERR, "abnormal access to deleted dentry\n");
+		return NULL;
+	}
+
+	if (exfat_find_location(sb, p_dir, entry, &sec, &off))
+		return NULL;
+
+	if (p_dir->dir != EXFAT_FREE_CLUSTER &&
+			!(entry & (dentries_per_page - 1)))
+		exfat_dir_readahead(sb, sec);
+
+	*bh = sb_bread(sb, sec);
+	if (!*bh)
+		return NULL;
+
+	if (sector)
+		*sector = sec;
+	return (struct exfat_dentry *)((*bh)->b_data + off);
+}
+
+enum exfat_validate_dentry_mode {
+	ES_MODE_STARTED,
+	ES_MODE_GET_FILE_ENTRY,
+	ES_MODE_GET_STRM_ENTRY,
+	ES_MODE_GET_NAME_ENTRY,
+	ES_MODE_GET_CRITICAL_SEC_ENTRY,
+};
+
+static bool exfat_validate_entry(unsigned int type,
+		enum exfat_validate_dentry_mode *mode)
+{
+	if (type == TYPE_UNUSED || type == TYPE_DELETED)
+		return false;
+
+	switch (*mode) {
+	case ES_MODE_STARTED:
+		if  (type != TYPE_FILE && type != TYPE_DIR)
+			return false;
+		*mode = ES_MODE_GET_FILE_ENTRY;
+		return true;
+	case ES_MODE_GET_FILE_ENTRY:
+		if (type != TYPE_STREAM)
+			return false;
+		*mode = ES_MODE_GET_STRM_ENTRY;
+		return true;
+	case ES_MODE_GET_STRM_ENTRY:
+		if (type != TYPE_EXTEND)
+			return false;
+		*mode = ES_MODE_GET_NAME_ENTRY;
+		return true;
+	case ES_MODE_GET_NAME_ENTRY:
+		if (type == TYPE_STREAM)
+			return false;
+		if (type != TYPE_EXTEND) {
+			if (!(type & TYPE_CRITICAL_SEC))
+				return false;
+			*mode = ES_MODE_GET_CRITICAL_SEC_ENTRY;
+		}
+		return true;
+	case ES_MODE_GET_CRITICAL_SEC_ENTRY:
+		if (type == TYPE_EXTEND || type == TYPE_STREAM)
+			return false;
+		if ((type & TYPE_CRITICAL_SEC) != TYPE_CRITICAL_SEC)
+			return false;
+		return true;
+	default:
+		WARN_ON_ONCE(1);
+		return false;
+	}
+}
+
+/*
+ * Returns a set of dentries for a file or dir.
+ *
+ * Note that this is a copy (dump) of dentries so that user should
+ * call write_entry_set() to apply changes made in this entry set
+ * to the real device.
+ *
+ * in:
+ *   sb+p_dir+entry: indicates a file/dir
+ *   type:  specifies how many dentries should be included.
+ * out:
+ *   file_ep: will point the first dentry(= file dentry) on success
+ * return:
+ *   pointer of entry set on success,
+ *   NULL on failure.
+ */
+struct exfat_entry_set_cache *exfat_get_dentry_set(struct super_block *sb,
+		struct exfat_chain *p_dir, int entry, unsigned int type,
+		struct exfat_dentry **file_ep)
+{
+	int ret;
+	unsigned int off, byte_offset, clu = 0;
+	unsigned int entry_type;
+	sector_t sec;
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+	struct exfat_entry_set_cache *es;
+	struct exfat_dentry *ep, *pos;
+	unsigned char num_entries;
+	enum exfat_validate_dentry_mode mode = ES_MODE_STARTED;
+	struct buffer_head *bh;
+
+	if (p_dir->dir == DIR_DELETED) {
+		exfat_msg(sb, KERN_ERR, "access to deleted dentry\n");
+		return NULL;
+	}
+
+	byte_offset = EXFAT_DEN_TO_B(entry);
+	ret = exfat_walk_fat_chain(sb, p_dir, byte_offset, &clu);
+	if (ret)
+		return NULL;
+
+	/* byte offset in cluster */
+	byte_offset = EXFAT_CLU_OFFSET(byte_offset, sbi);
+
+	/* byte offset in sector */
+	off = EXFAT_BLK_OFFSET(byte_offset, sb);
+
+	/* sector offset in cluster */
+	sec = EXFAT_B_TO_BLK(byte_offset, sb);
+	sec += exfat_cluster_to_sector(sbi, clu);
+
+	bh = sb_bread(sb, sec);
+	if (!bh)
+		return NULL;
+
+	ep = (struct exfat_dentry *)(bh->b_data + off);
+	entry_type = exfat_get_entry_type(ep);
+
+	if (entry_type != TYPE_FILE && entry_type != TYPE_DIR)
+		goto release_bh;
+
+	num_entries = type == ES_ALL_ENTRIES ?
+		ep->dentry.file.num_ext + 1 : type;
+	es = kmalloc(struct_size(es, entries, num_entries), GFP_KERNEL);
+	if (!es)
+		goto release_bh;
+
+	es->num_entries = num_entries;
+	es->sector = sec;
+	es->offset = off;
+	es->alloc_flag = p_dir->flags;
+
+	pos = &es->entries[0];
+
+	while (num_entries) {
+		if (!exfat_validate_entry(exfat_get_entry_type(ep), &mode))
+			goto free_es;
+
+		/* copy dentry */
+		memcpy(pos, ep, sizeof(struct exfat_dentry));
+
+		if (--num_entries == 0)
+			break;
+
+		if (((off + DENTRY_SIZE) & (sb->s_blocksize - 1)) <
+		    (off & (sb->s_blocksize - 1))) {
+			/* get the next sector */
+			if (exfat_is_last_sector_in_cluster(sbi, sec)) {
+				if (es->alloc_flag == ALLOC_NO_FAT_CHAIN)
+					clu++;
+				else if (exfat_get_next_cluster(sb, &clu))
+					goto free_es;
+				sec = exfat_cluster_to_sector(sbi, clu);
+			} else {
+				sec++;
+			}
+
+			brelse(bh);
+			bh = sb_bread(sb, sec);
+			if (!bh)
+				goto free_es;
+			off = 0;
+			ep = (struct exfat_dentry *)bh->b_data;
+		} else {
+			ep++;
+			off += DENTRY_SIZE;
+		}
+		pos++;
+	}
+
+	if (file_ep)
+		*file_ep = &es->entries[0];
+	brelse(bh);
+	return es;
+
+free_es:
+	kfree(es);
+release_bh:
+	brelse(bh);
+	return NULL;
+}
+
+enum {
+	DIRENT_STEP_FILE,
+	DIRENT_STEP_STRM,
+	DIRENT_STEP_NAME,
+	DIRENT_STEP_SECD,
+};
+
+/*
+ * return values:
+ *   >= 0	: return dir entiry position with the name in dir
+ *   -EEXIST	: (root dir, ".") it is the root dir itself
+ *   -ENOENT	: entry with the name does not exist
+ *   -EIO	: I/O error
+ */
+int exfat_find_dir_entry(struct super_block *sb, struct exfat_inode_info *ei,
+		struct exfat_chain *p_dir, struct exfat_uni_name *p_uniname,
+		int num_entries, unsigned int type)
+{
+	int i, rewind = 0, dentry = 0, end_eidx = 0, num_ext = 0, len;
+	int order, step, name_len = 0;
+	int dentries_per_clu, num_empty = 0;
+	unsigned int entry_type;
+	unsigned short *uniname = NULL;
+	struct exfat_chain clu;
+	struct exfat_hint *hint_stat = &ei->hint_stat;
+	struct exfat_hint_femp candi_empty;
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+
+	dentries_per_clu = sbi->dentries_per_clu;
+
+	exfat_chain_dup(&clu, p_dir);
+
+	if (hint_stat->eidx) {
+		clu.dir = hint_stat->clu;
+		dentry = hint_stat->eidx;
+		end_eidx = dentry;
+	}
+
+	candi_empty.eidx = EXFAT_HINT_NONE;
+rewind:
+	order = 0;
+	step = DIRENT_STEP_FILE;
+	while (clu.dir != EXFAT_EOF_CLUSTER) {
+		i = dentry & (dentries_per_clu - 1);
+		for (; i < dentries_per_clu; i++, dentry++) {
+			struct exfat_dentry *ep;
+			struct buffer_head *bh;
+
+			if (rewind && dentry == end_eidx)
+				goto not_found;
+
+			ep = exfat_get_dentry(sb, &clu, i, &bh, NULL);
+			if (!ep)
+				return -EIO;
+
+			entry_type = exfat_get_entry_type(ep);
+
+			if (entry_type == TYPE_UNUSED ||
+			    entry_type == TYPE_DELETED) {
+				step = DIRENT_STEP_FILE;
+
+				num_empty++;
+				if (candi_empty.eidx == EXFAT_HINT_NONE &&
+						num_empty == 1) {
+					exfat_chain_set(&candi_empty.cur,
+						clu.dir, clu.size, clu.flags);
+				}
+
+				if (candi_empty.eidx == EXFAT_HINT_NONE &&
+						num_empty >= num_entries) {
+					candi_empty.eidx =
+						dentry - (num_empty - 1);
+					WARN_ON(candi_empty.eidx < 0);
+					candi_empty.count = num_empty;
+
+					if (ei->hint_femp.eidx ==
+							EXFAT_HINT_NONE ||
+						candi_empty.eidx <=
+							 ei->hint_femp.eidx) {
+						memcpy(&ei->hint_femp,
+							&candi_empty,
+							sizeof(candi_empty));
+					}
+				}
+
+				brelse(bh);
+				if (entry_type == TYPE_UNUSED)
+					goto not_found;
+				continue;
+			}
+
+			num_empty = 0;
+			candi_empty.eidx = EXFAT_HINT_NONE;
+
+			if (entry_type == TYPE_FILE || entry_type == TYPE_DIR) {
+				step = DIRENT_STEP_FILE;
+				if (type == TYPE_ALL || type == entry_type) {
+					num_ext = ep->dentry.file.num_ext;
+					step = DIRENT_STEP_STRM;
+				}
+				brelse(bh);
+				continue;
+			}
+
+			if (entry_type == TYPE_STREAM) {
+				unsigned short name_hash;
+
+				if (step != DIRENT_STEP_STRM) {
+					step = DIRENT_STEP_FILE;
+					brelse(bh);
+					continue;
+				}
+				step = DIRENT_STEP_FILE;
+				name_hash = le16_to_cpu(
+						ep->dentry.stream.name_hash);
+				if (p_uniname->name_hash == name_hash &&
+				    p_uniname->name_len ==
+						ep->dentry.stream.name_len) {
+					step = DIRENT_STEP_NAME;
+					order = 1;
+					name_len = 0;
+				}
+				brelse(bh);
+				continue;
+			}
+
+			brelse(bh);
+			if (entry_type == TYPE_EXTEND) {
+				unsigned short entry_uniname[16], unichar;
+
+				if (step != DIRENT_STEP_NAME) {
+					step = DIRENT_STEP_FILE;
+					continue;
+				}
+
+				if (++order == 2)
+					uniname = p_uniname->name;
+				else
+					uniname += EXFAT_FILE_NAME_LEN;
+
+				len = exfat_extract_uni_name(ep, entry_uniname);
+				name_len += len;
+
+				unichar = *(uniname+len);
+				*(uniname+len) = 0x0;
+
+				if (exfat_uniname_ncmp(sb, uniname,
+					entry_uniname, len)) {
+					step = DIRENT_STEP_FILE;
+				} else if (p_uniname->name_len == name_len) {
+					if (order == num_ext)
+						goto found;
+					step = DIRENT_STEP_SECD;
+				}
+
+				*(uniname+len) = unichar;
+				continue;
+			}
+
+			if (entry_type &
+					(TYPE_CRITICAL_SEC | TYPE_BENIGN_SEC)) {
+				if (step == DIRENT_STEP_SECD) {
+					if (++order == num_ext)
+						goto found;
+					continue;
+				}
+			}
+			step = DIRENT_STEP_FILE;
+		}
+
+		if (clu.flags == ALLOC_NO_FAT_CHAIN) {
+			if (--clu.size > 0)
+				clu.dir++;
+			else
+				clu.dir = EXFAT_EOF_CLUSTER;
+		} else {
+			if (exfat_get_next_cluster(sb, &clu.dir))
+				return -EIO;
+		}
+	}
+
+not_found:
+	/*
+	 * We started at not 0 index,so we should try to find target
+	 * from 0 index to the index we started at.
+	 */
+	if (!rewind && end_eidx) {
+		rewind = 1;
+		dentry = 0;
+		clu.dir = p_dir->dir;
+		/* reset empty hint */
+		num_empty = 0;
+		candi_empty.eidx = EXFAT_HINT_NONE;
+		goto rewind;
+	}
+
+	/* initialized hint_stat */
+	hint_stat->clu = p_dir->dir;
+	hint_stat->eidx = 0;
+	return -ENOENT;
+
+found:
+	/* next dentry we'll find is out of this cluster */
+	if (!((dentry + 1) & (dentries_per_clu - 1))) {
+		int ret = 0;
+
+		if (clu.flags == ALLOC_NO_FAT_CHAIN) {
+			if (--clu.size > 0)
+				clu.dir++;
+			else
+				clu.dir = EXFAT_EOF_CLUSTER;
+		} else {
+			ret = exfat_get_next_cluster(sb, &clu.dir);
+		}
+
+		if (ret || clu.dir != EXFAT_EOF_CLUSTER) {
+			/* just initialized hint_stat */
+			hint_stat->clu = p_dir->dir;
+			hint_stat->eidx = 0;
+			return (dentry - num_ext);
+		}
+	}
+
+	hint_stat->clu = clu.dir;
+	hint_stat->eidx = dentry + 1;
+	return dentry - num_ext;
+}
+
+int exfat_count_ext_entries(struct super_block *sb, struct exfat_chain *p_dir,
+		int entry, struct exfat_dentry *ep)
+{
+	int i, count = 0;
+	unsigned int type;
+	struct exfat_dentry *ext_ep;
+	struct buffer_head *bh;
+
+	for (i = 0, entry++; i < ep->dentry.file.num_ext; i++, entry++) {
+		ext_ep = exfat_get_dentry(sb, p_dir, entry, &bh, NULL);
+		if (!ext_ep)
+			return -EIO;
+
+		type = exfat_get_entry_type(ext_ep);
+		brelse(bh);
+		if (type == TYPE_EXTEND || type == TYPE_STREAM)
+			count++;
+		else
+			break;
+	}
+	return count;
+}
+
+int exfat_count_dir_entries(struct super_block *sb, struct exfat_chain *p_dir)
+{
+	int i, count = 0;
+	int dentries_per_clu;
+	unsigned int entry_type;
+	struct exfat_chain clu;
+	struct exfat_dentry *ep;
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+	struct buffer_head *bh;
+
+	dentries_per_clu = sbi->dentries_per_clu;
+
+	exfat_chain_dup(&clu, p_dir);
+
+	while (clu.dir != EXFAT_EOF_CLUSTER) {
+		for (i = 0; i < dentries_per_clu; i++) {
+			ep = exfat_get_dentry(sb, &clu, i, &bh, NULL);
+			if (!ep)
+				return -EIO;
+			entry_type = exfat_get_entry_type(ep);
+			brelse(bh);
+
+			if (entry_type == TYPE_UNUSED)
+				return count;
+			if (entry_type != TYPE_DIR)
+				continue;
+			count++;
+		}
+
+		if (clu.flags == ALLOC_NO_FAT_CHAIN) {
+			if (--clu.size > 0)
+				clu.dir++;
+			else
+				clu.dir = EXFAT_EOF_CLUSTER;
+		} else {
+			if (exfat_get_next_cluster(sb, &(clu.dir)))
+				return -EIO;
+		}
+	}
+
+	return count;
+}
diff --git a/fs/exfat/exfat_fs.h b/fs/exfat/exfat_fs.h
new file mode 100644
index 0000000..67d4e46
--- /dev/null
+++ b/fs/exfat/exfat_fs.h
@@ -0,0 +1,519 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2012-2013 Samsung Electronics Co., Ltd.
+ */
+
+#ifndef _EXFAT_FS_H
+#define _EXFAT_FS_H
+
+#include <linux/fs.h>
+#include <linux/ratelimit.h>
+#include <linux/nls.h>
+
+#define EXFAT_SUPER_MAGIC       0x2011BAB0UL
+#define EXFAT_ROOT_INO		1
+
+#define EXFAT_SB_DIRTY		0
+
+#define EXFAT_CLUSTERS_UNTRACKED (~0u)
+
+/*
+ * exfat error flags
+ */
+enum exfat_error_mode {
+	EXFAT_ERRORS_CONT,	/* ignore error and continue */
+	EXFAT_ERRORS_PANIC,	/* panic on error */
+	EXFAT_ERRORS_RO,	/* remount r/o on error */
+};
+
+/*
+ * exfat nls lossy flag
+ */
+enum {
+	NLS_NAME_NO_LOSSY,	/* no lossy */
+	NLS_NAME_LOSSY,		/* just detected incorrect filename(s) */
+	NLS_NAME_OVERLEN,	/* the length is over than its limit */
+};
+
+#define EXFAT_HASH_BITS		8
+#define EXFAT_HASH_SIZE		(1UL << EXFAT_HASH_BITS)
+
+/*
+ * Type Definitions
+ */
+#define ES_2_ENTRIES		2
+#define ES_ALL_ENTRIES		0
+
+#define DIR_DELETED		0xFFFF0321
+
+/* type values */
+#define TYPE_UNUSED		0x0000
+#define TYPE_DELETED		0x0001
+#define TYPE_INVALID		0x0002
+#define TYPE_CRITICAL_PRI	0x0100
+#define TYPE_BITMAP		0x0101
+#define TYPE_UPCASE		0x0102
+#define TYPE_VOLUME		0x0103
+#define TYPE_DIR		0x0104
+#define TYPE_FILE		0x011F
+#define TYPE_CRITICAL_SEC	0x0200
+#define TYPE_STREAM		0x0201
+#define TYPE_EXTEND		0x0202
+#define TYPE_ACL		0x0203
+#define TYPE_BENIGN_PRI		0x0400
+#define TYPE_GUID		0x0401
+#define TYPE_PADDING		0x0402
+#define TYPE_ACLTAB		0x0403
+#define TYPE_BENIGN_SEC		0x0800
+#define TYPE_ALL		0x0FFF
+
+#define MAX_CHARSET_SIZE	6 /* max size of multi-byte character */
+#define MAX_NAME_LENGTH		255 /* max len of file name excluding NULL */
+#define MAX_VFSNAME_BUF_SIZE	((MAX_NAME_LENGTH + 1) * MAX_CHARSET_SIZE)
+
+#define FAT_CACHE_SIZE		128
+#define FAT_CACHE_HASH_SIZE	64
+#define BUF_CACHE_SIZE		256
+#define BUF_CACHE_HASH_SIZE	64
+
+#define EXFAT_HINT_NONE		-1
+#define EXFAT_MIN_SUBDIR	2
+
+/*
+ * helpers for cluster size to byte conversion.
+ */
+#define EXFAT_CLU_TO_B(b, sbi)		((b) << (sbi)->cluster_size_bits)
+#define EXFAT_B_TO_CLU(b, sbi)		((b) >> (sbi)->cluster_size_bits)
+#define EXFAT_B_TO_CLU_ROUND_UP(b, sbi)	\
+	(((b - 1) >> (sbi)->cluster_size_bits) + 1)
+#define EXFAT_CLU_OFFSET(off, sbi)	((off) & ((sbi)->cluster_size - 1))
+
+/*
+ * helpers for block size to byte conversion.
+ */
+#define EXFAT_BLK_TO_B(b, sb)		((b) << (sb)->s_blocksize_bits)
+#define EXFAT_B_TO_BLK(b, sb)		((b) >> (sb)->s_blocksize_bits)
+#define EXFAT_B_TO_BLK_ROUND_UP(b, sb)	\
+	(((b - 1) >> (sb)->s_blocksize_bits) + 1)
+#define EXFAT_BLK_OFFSET(off, sb)	((off) & ((sb)->s_blocksize - 1))
+
+/*
+ * helpers for block size to dentry size conversion.
+ */
+#define EXFAT_B_TO_DEN_IDX(b, sbi)	\
+	((b) << ((sbi)->cluster_size_bits - DENTRY_SIZE_BITS))
+#define EXFAT_B_TO_DEN(b)		((b) >> DENTRY_SIZE_BITS)
+#define EXFAT_DEN_TO_B(b)		((b) << DENTRY_SIZE_BITS)
+
+/*
+ * helpers for fat entry.
+ */
+#define FAT_ENT_SIZE (4)
+#define FAT_ENT_SIZE_BITS (2)
+#define FAT_ENT_OFFSET_SECTOR(sb, loc) (EXFAT_SB(sb)->FAT1_start_sector + \
+	(((u64)loc << FAT_ENT_SIZE_BITS) >> sb->s_blocksize_bits))
+#define FAT_ENT_OFFSET_BYTE_IN_SECTOR(sb, loc)	\
+	((loc << FAT_ENT_SIZE_BITS) & (sb->s_blocksize - 1))
+
+/*
+ * helpers for bitmap.
+ */
+#define CLUSTER_TO_BITMAP_ENT(clu) ((clu) - EXFAT_RESERVED_CLUSTERS)
+#define BITMAP_ENT_TO_CLUSTER(ent) ((ent) + EXFAT_RESERVED_CLUSTERS)
+#define BITS_PER_SECTOR(sb) ((sb)->s_blocksize * BITS_PER_BYTE)
+#define BITS_PER_SECTOR_MASK(sb) (BITS_PER_SECTOR(sb) - 1)
+#define BITMAP_OFFSET_SECTOR_INDEX(sb, ent) \
+	((ent / BITS_PER_BYTE) >> (sb)->s_blocksize_bits)
+#define BITMAP_OFFSET_BIT_IN_SECTOR(sb, ent) (ent & BITS_PER_SECTOR_MASK(sb))
+#define BITMAP_OFFSET_BYTE_IN_SECTOR(sb, ent) \
+	((ent / BITS_PER_BYTE) & ((sb)->s_blocksize - 1))
+#define BITS_PER_BYTE_MASK	0x7
+#define IGNORED_BITS_REMAINED(clu, clu_base) ((1 << ((clu) - (clu_base))) - 1)
+
+struct exfat_dentry_namebuf {
+	char *lfn;
+	int lfnbuf_len; /* usally MAX_UNINAME_BUF_SIZE */
+};
+
+/* unicode name structure */
+struct exfat_uni_name {
+	/* +3 for null and for converting */
+	unsigned short name[MAX_NAME_LENGTH + 3];
+	unsigned short name_hash;
+	unsigned char name_len;
+};
+
+/* directory structure */
+struct exfat_chain {
+	unsigned int dir;
+	unsigned int size;
+	unsigned char flags;
+};
+
+/* first empty entry hint information */
+struct exfat_hint_femp {
+	/* entry index of a directory */
+	int eidx;
+	/* count of continuous empty entry */
+	int count;
+	/* the cluster that first empty slot exists in */
+	struct exfat_chain cur;
+};
+
+/* hint structure */
+struct exfat_hint {
+	unsigned int clu;
+	union {
+		unsigned int off; /* cluster offset */
+		int eidx; /* entry index */
+	};
+};
+
+struct exfat_entry_set_cache {
+	/* sector number that contains file_entry */
+	sector_t sector;
+	/* byte offset in the sector */
+	unsigned int offset;
+	/* flag in stream entry. 01 for cluster chain, 03 for contig. */
+	int alloc_flag;
+	unsigned int num_entries;
+	struct exfat_dentry entries[];
+};
+
+struct exfat_dir_entry {
+	struct exfat_chain dir;
+	int entry;
+	unsigned int type;
+	unsigned int start_clu;
+	unsigned char flags;
+	unsigned short attr;
+	loff_t size;
+	unsigned int num_subdirs;
+	struct timespec64 atime;
+	struct timespec64 mtime;
+	struct timespec64 crtime;
+	struct exfat_dentry_namebuf namebuf;
+};
+
+/*
+ * exfat mount in-memory data
+ */
+struct exfat_mount_options {
+	kuid_t fs_uid;
+	kgid_t fs_gid;
+	unsigned short fs_fmask;
+	unsigned short fs_dmask;
+	/* permission for setting the [am]time */
+	unsigned short allow_utime;
+	/* charset for filename input/display */
+	char *iocharset;
+	/* on error: continue, panic, remount-ro */
+	enum exfat_error_mode errors;
+	unsigned utf8:1, /* Use of UTF-8 character set */
+		 discard:1; /* Issue discard requests on deletions */
+	int time_offset; /* Offset of timestamps from UTC (in minutes) */
+};
+
+/*
+ * EXFAT file system superblock in-memory data
+ */
+struct exfat_sb_info {
+	unsigned long long num_sectors; /* num of sectors in volume */
+	unsigned int num_clusters; /* num of clusters in volume */
+	unsigned int cluster_size; /* cluster size in bytes */
+	unsigned int cluster_size_bits;
+	unsigned int sect_per_clus; /* cluster size in sectors */
+	unsigned int sect_per_clus_bits;
+	unsigned long long FAT1_start_sector; /* FAT1 start sector */
+	unsigned long long FAT2_start_sector; /* FAT2 start sector */
+	unsigned long long data_start_sector; /* data area start sector */
+	unsigned int num_FAT_sectors; /* num of FAT sectors */
+	unsigned int root_dir; /* root dir cluster */
+	unsigned int dentries_per_clu; /* num of dentries per cluster */
+	unsigned int vol_flag; /* volume dirty flag */
+	struct buffer_head *pbr_bh; /* buffer_head of PBR sector */
+
+	unsigned int map_clu; /* allocation bitmap start cluster */
+	unsigned int map_sectors; /* num of allocation bitmap sectors */
+	struct buffer_head **vol_amap; /* allocation bitmap */
+
+	unsigned short *vol_utbl; /* upcase table */
+
+	unsigned int clu_srch_ptr; /* cluster search pointer */
+	unsigned int used_clusters; /* number of used clusters */
+
+	unsigned long s_state;
+	struct mutex s_lock; /* superblock lock */
+	struct exfat_mount_options options;
+	struct nls_table *nls_io; /* Charset used for input and display */
+	struct ratelimit_state ratelimit;
+
+	spinlock_t inode_hash_lock;
+	struct hlist_head inode_hashtable[EXFAT_HASH_SIZE];
+
+	struct rcu_head rcu;
+};
+
+/*
+ * EXFAT file system inode in-memory data
+ */
+struct exfat_inode_info {
+	struct exfat_chain dir;
+	int entry;
+	unsigned int type;
+	unsigned short attr;
+	unsigned int start_clu;
+	unsigned char flags;
+	/*
+	 * the copy of low 32bit of i_version to check
+	 * the validation of hint_stat.
+	 */
+	unsigned int version;
+	/* file offset or dentry index for readdir */
+	loff_t rwoffset;
+
+	/* hint for cluster last accessed */
+	struct exfat_hint hint_bmap;
+	/* hint for entry index we try to lookup next time */
+	struct exfat_hint hint_stat;
+	/* hint for first empty entry */
+	struct exfat_hint_femp hint_femp;
+
+	spinlock_t cache_lru_lock;
+	struct list_head cache_lru;
+	int nr_caches;
+	/* for avoiding the race between alloc and free */
+	unsigned int cache_valid_id;
+
+	/*
+	 * NOTE: i_size_ondisk is 64bits, so must hold ->inode_lock to access.
+	 * physically allocated size.
+	 */
+	loff_t i_size_ondisk;
+	/* block-aligned i_size (used in cont_write_begin) */
+	loff_t i_size_aligned;
+	/* on-disk position of directory entry or 0 */
+	loff_t i_pos;
+	/* hash by i_location */
+	struct hlist_node i_hash_fat;
+	/* protect bmap against truncate */
+	struct rw_semaphore truncate_lock;
+	struct inode vfs_inode;
+	/* File creation time */
+	struct timespec64 i_crtime;
+};
+
+static inline struct exfat_sb_info *EXFAT_SB(struct super_block *sb)
+{
+	return sb->s_fs_info;
+}
+
+static inline struct exfat_inode_info *EXFAT_I(struct inode *inode)
+{
+	return container_of(inode, struct exfat_inode_info, vfs_inode);
+}
+
+/*
+ * If ->i_mode can't hold 0222 (i.e. ATTR_RO), we use ->i_attrs to
+ * save ATTR_RO instead of ->i_mode.
+ *
+ * If it's directory and !sbi->options.rodir, ATTR_RO isn't read-only
+ * bit, it's just used as flag for app.
+ */
+static inline int exfat_mode_can_hold_ro(struct inode *inode)
+{
+	struct exfat_sb_info *sbi = EXFAT_SB(inode->i_sb);
+
+	if (S_ISDIR(inode->i_mode))
+		return 0;
+
+	if ((~sbi->options.fs_fmask) & 0222)
+		return 1;
+	return 0;
+}
+
+/* Convert attribute bits and a mask to the UNIX mode. */
+static inline mode_t exfat_make_mode(struct exfat_sb_info *sbi,
+		unsigned short attr, mode_t mode)
+{
+	if ((attr & ATTR_READONLY) && !(attr & ATTR_SUBDIR))
+		mode &= ~0222;
+
+	if (attr & ATTR_SUBDIR)
+		return (mode & ~sbi->options.fs_dmask) | S_IFDIR;
+
+	return (mode & ~sbi->options.fs_fmask) | S_IFREG;
+}
+
+/* Return the FAT attribute byte for this inode */
+static inline unsigned short exfat_make_attr(struct inode *inode)
+{
+	unsigned short attr = EXFAT_I(inode)->attr;
+
+	if (S_ISDIR(inode->i_mode))
+		attr |= ATTR_SUBDIR;
+	if (exfat_mode_can_hold_ro(inode) && !(inode->i_mode & 0222))
+		attr |= ATTR_READONLY;
+	return attr;
+}
+
+static inline void exfat_save_attr(struct inode *inode, unsigned short attr)
+{
+	if (exfat_mode_can_hold_ro(inode))
+		EXFAT_I(inode)->attr = attr & (ATTR_RWMASK | ATTR_READONLY);
+	else
+		EXFAT_I(inode)->attr = attr & ATTR_RWMASK;
+}
+
+static inline bool exfat_is_last_sector_in_cluster(struct exfat_sb_info *sbi,
+		sector_t sec)
+{
+	return ((sec - sbi->data_start_sector + 1) &
+		((1 << sbi->sect_per_clus_bits) - 1)) == 0;
+}
+
+static inline sector_t exfat_cluster_to_sector(struct exfat_sb_info *sbi,
+		unsigned int clus)
+{
+	return ((clus - EXFAT_RESERVED_CLUSTERS) << sbi->sect_per_clus_bits) +
+		sbi->data_start_sector;
+}
+
+static inline int exfat_sector_to_cluster(struct exfat_sb_info *sbi,
+		sector_t sec)
+{
+	return ((sec - sbi->data_start_sector) >> sbi->sect_per_clus_bits) +
+		EXFAT_RESERVED_CLUSTERS;
+}
+
+/* super.c */
+int exfat_set_vol_flags(struct super_block *sb, unsigned short new_flag);
+
+/* fatent.c */
+#define exfat_get_next_cluster(sb, pclu) exfat_ent_get(sb, *(pclu), pclu)
+
+int exfat_alloc_cluster(struct inode *inode, unsigned int num_alloc,
+		struct exfat_chain *p_chain);
+int exfat_free_cluster(struct inode *inode, struct exfat_chain *p_chain);
+int exfat_ent_get(struct super_block *sb, unsigned int loc,
+		unsigned int *content);
+int exfat_ent_set(struct super_block *sb, unsigned int loc,
+		unsigned int content);
+int exfat_count_ext_entries(struct super_block *sb, struct exfat_chain *p_dir,
+		int entry, struct exfat_dentry *p_entry);
+int exfat_chain_cont_cluster(struct super_block *sb, unsigned int chain,
+		unsigned int len);
+int exfat_zeroed_cluster(struct inode *dir, unsigned int clu);
+int exfat_find_last_cluster(struct super_block *sb, struct exfat_chain *p_chain,
+		unsigned int *ret_clu);
+int exfat_count_num_clusters(struct super_block *sb,
+		struct exfat_chain *p_chain, unsigned int *ret_count);
+
+/* balloc.c */
+int exfat_load_bitmap(struct super_block *sb);
+void exfat_free_bitmap(struct exfat_sb_info *sbi);
+int exfat_set_bitmap(struct inode *inode, unsigned int clu);
+void exfat_clear_bitmap(struct inode *inode, unsigned int clu);
+unsigned int exfat_find_free_bitmap(struct super_block *sb, unsigned int clu);
+int exfat_count_used_clusters(struct super_block *sb, unsigned int *ret_count);
+
+/* file.c */
+extern const struct file_operations exfat_file_operations;
+int __exfat_truncate(struct inode *inode, loff_t new_size);
+void exfat_truncate(struct inode *inode, loff_t size);
+int exfat_setattr(struct dentry *dentry, struct iattr *attr);
+int exfat_getattr(const struct path *path, struct kstat *stat,
+		unsigned int request_mask, unsigned int query_flags);
+
+/* namei.c */
+extern const struct dentry_operations exfat_dentry_ops;
+extern const struct dentry_operations exfat_utf8_dentry_ops;
+
+/* cache.c */
+int exfat_cache_init(void);
+void exfat_cache_shutdown(void);
+void exfat_cache_init_inode(struct inode *inode);
+void exfat_cache_inval_inode(struct inode *inode);
+int exfat_get_cluster(struct inode *inode, unsigned int cluster,
+		unsigned int *fclus, unsigned int *dclus,
+		unsigned int *last_dclus, int allow_eof);
+
+/* dir.c */
+extern const struct inode_operations exfat_dir_inode_operations;
+extern const struct file_operations exfat_dir_operations;
+unsigned int exfat_get_entry_type(struct exfat_dentry *p_entry);
+int exfat_init_dir_entry(struct inode *inode, struct exfat_chain *p_dir,
+		int entry, unsigned int type, unsigned int start_clu,
+		unsigned long long size);
+int exfat_init_ext_entry(struct inode *inode, struct exfat_chain *p_dir,
+		int entry, int num_entries, struct exfat_uni_name *p_uniname);
+int exfat_remove_entries(struct inode *inode, struct exfat_chain *p_dir,
+		int entry, int order, int num_entries);
+int exfat_update_dir_chksum(struct inode *inode, struct exfat_chain *p_dir,
+		int entry);
+int exfat_update_dir_chksum_with_entry_set(struct super_block *sb,
+		struct exfat_entry_set_cache *es, int sync);
+int exfat_calc_num_entries(struct exfat_uni_name *p_uniname);
+int exfat_find_dir_entry(struct super_block *sb, struct exfat_inode_info *ei,
+		struct exfat_chain *p_dir, struct exfat_uni_name *p_uniname,
+		int num_entries, unsigned int type);
+int exfat_alloc_new_dir(struct inode *inode, struct exfat_chain *clu);
+int exfat_find_location(struct super_block *sb, struct exfat_chain *p_dir,
+		int entry, sector_t *sector, int *offset);
+struct exfat_dentry *exfat_get_dentry(struct super_block *sb,
+		struct exfat_chain *p_dir, int entry, struct buffer_head **bh,
+		sector_t *sector);
+struct exfat_entry_set_cache *exfat_get_dentry_set(struct super_block *sb,
+		struct exfat_chain *p_dir, int entry, unsigned int type,
+		struct exfat_dentry **file_ep);
+int exfat_count_dir_entries(struct super_block *sb, struct exfat_chain *p_dir);
+
+/* inode.c */
+extern const struct inode_operations exfat_file_inode_operations;
+void exfat_sync_inode(struct inode *inode);
+struct inode *exfat_build_inode(struct super_block *sb,
+		struct exfat_dir_entry *info, loff_t i_pos);
+void exfat_hash_inode(struct inode *inode, loff_t i_pos);
+void exfat_unhash_inode(struct inode *inode);
+struct inode *exfat_iget(struct super_block *sb, loff_t i_pos);
+int exfat_write_inode(struct inode *inode, struct writeback_control *wbc);
+void exfat_evict_inode(struct inode *inode);
+int exfat_block_truncate_page(struct inode *inode, loff_t from);
+
+/* exfat/nls.c */
+unsigned short exfat_toupper(struct super_block *sb, unsigned short a);
+int exfat_uniname_ncmp(struct super_block *sb, unsigned short *a,
+		unsigned short *b, unsigned int len);
+int exfat_utf16_to_nls(struct super_block *sb,
+		struct exfat_uni_name *uniname, unsigned char *p_cstring,
+		int len);
+int exfat_nls_to_utf16(struct super_block *sb,
+		const unsigned char *p_cstring, const int len,
+		struct exfat_uni_name *uniname, int *p_lossy);
+int exfat_create_upcase_table(struct super_block *sb);
+void exfat_free_upcase_table(struct exfat_sb_info *sbi);
+unsigned short exfat_high_surrogate(unicode_t u);
+unsigned short exfat_low_surrogate(unicode_t u);
+
+/* exfat/misc.c */
+void __exfat_fs_error(struct super_block *sb, int report, const char *fmt, ...)
+		__printf(3, 4) __cold;
+#define exfat_fs_error(sb, fmt, args...)          \
+		__exfat_fs_error(sb, 1, fmt, ## args)
+#define exfat_fs_error_ratelimit(sb, fmt, args...) \
+		__exfat_fs_error(sb, __ratelimit(&EXFAT_SB(sb)->ratelimit), \
+		fmt, ## args)
+void exfat_msg(struct super_block *sb, const char *lv, const char *fmt, ...)
+		__printf(3, 4) __cold;
+void exfat_get_entry_time(struct exfat_sb_info *sbi, struct timespec64 *ts,
+		u8 tz, __le16 time, __le16 date, u8 time_ms);
+void exfat_set_entry_time(struct exfat_sb_info *sbi, struct timespec64 *ts,
+		u8 *tz, __le16 *time, __le16 *date, u8 *time_ms);
+unsigned short exfat_calc_chksum_2byte(void *data, int len,
+		unsigned short chksum, int type);
+void exfat_update_bh(struct super_block *sb, struct buffer_head *bh, int sync);
+void exfat_chain_set(struct exfat_chain *ec, unsigned int dir,
+		unsigned int size, unsigned char flags);
+void exfat_chain_dup(struct exfat_chain *dup, struct exfat_chain *ec);
+
+#endif /* !_EXFAT_FS_H */
diff --git a/fs/exfat/exfat_raw.h b/fs/exfat/exfat_raw.h
new file mode 100644
index 0000000..2a84101
--- /dev/null
+++ b/fs/exfat/exfat_raw.h
@@ -0,0 +1,184 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2012-2013 Samsung Electronics Co., Ltd.
+ */
+
+#ifndef _EXFAT_RAW_H
+#define _EXFAT_RAW_H
+
+#include <linux/types.h>
+
+#define PBR_SIGNATURE		0xAA55
+
+#define EXFAT_MAX_FILE_LEN	255
+
+#define VOL_CLEAN		0x0000
+#define VOL_DIRTY		0x0002
+
+#define EXFAT_EOF_CLUSTER	0xFFFFFFFFu
+#define EXFAT_BAD_CLUSTER	0xFFFFFFF7u
+#define EXFAT_FREE_CLUSTER	0
+/* Cluster 0, 1 are reserved, the first cluster is 2 in the cluster heap. */
+#define EXFAT_RESERVED_CLUSTERS	2
+#define EXFAT_FIRST_CLUSTER	2
+#define EXFAT_DATA_CLUSTER_COUNT(sbi)	\
+	((sbi)->num_clusters - EXFAT_RESERVED_CLUSTERS)
+
+/* AllocationPossible and NoFatChain field in GeneralSecondaryFlags Field */
+#define ALLOC_FAT_CHAIN		0x01
+#define ALLOC_NO_FAT_CHAIN	0x03
+
+#define DENTRY_SIZE		32 /* directory entry size */
+#define DENTRY_SIZE_BITS	5
+/* exFAT allows 8388608(256MB) directory entries */
+#define MAX_EXFAT_DENTRIES	8388608
+
+/* dentry types */
+#define EXFAT_UNUSED		0x00	/* end of directory */
+#define EXFAT_DELETE		(~0x80)
+#define IS_EXFAT_DELETED(x)	((x) < 0x80) /* deleted file (0x01~0x7F) */
+#define EXFAT_INVAL		0x80	/* invalid value */
+#define EXFAT_BITMAP		0x81	/* allocation bitmap */
+#define EXFAT_UPCASE		0x82	/* upcase table */
+#define EXFAT_VOLUME		0x83	/* volume label */
+#define EXFAT_FILE		0x85	/* file or dir */
+#define EXFAT_GUID		0xA0
+#define EXFAT_PADDING		0xA1
+#define EXFAT_ACLTAB		0xA2
+#define EXFAT_STREAM		0xC0	/* stream entry */
+#define EXFAT_NAME		0xC1	/* file name entry */
+#define EXFAT_ACL		0xC2	/* stream entry */
+
+#define IS_EXFAT_CRITICAL_PRI(x)	(x < 0xA0)
+#define IS_EXFAT_BENIGN_PRI(x)		(x < 0xC0)
+#define IS_EXFAT_CRITICAL_SEC(x)	(x < 0xE0)
+
+/* checksum types */
+#define CS_DIR_ENTRY		0
+#define CS_PBR_SECTOR		1
+#define CS_DEFAULT		2
+
+/* file attributes */
+#define ATTR_READONLY		0x0001
+#define ATTR_HIDDEN		0x0002
+#define ATTR_SYSTEM		0x0004
+#define ATTR_VOLUME		0x0008
+#define ATTR_SUBDIR		0x0010
+#define ATTR_ARCHIVE		0x0020
+
+#define ATTR_RWMASK		(ATTR_HIDDEN | ATTR_SYSTEM | ATTR_VOLUME | \
+				 ATTR_SUBDIR | ATTR_ARCHIVE)
+
+#define PBR64_JUMP_BOOT_LEN		3
+#define PBR64_OEM_NAME_LEN		8
+#define PBR64_RESERVED_LEN		53
+
+#define EXFAT_FILE_NAME_LEN		15
+
+/* EXFAT BIOS parameter block (64 bytes) */
+struct bpb64 {
+	__u8 jmp_boot[PBR64_JUMP_BOOT_LEN];
+	__u8 oem_name[PBR64_OEM_NAME_LEN];
+	__u8 res_zero[PBR64_RESERVED_LEN];
+} __packed;
+
+/* EXFAT EXTEND BIOS parameter block (56 bytes) */
+struct bsx64 {
+	__le64 vol_offset;
+	__le64 vol_length;
+	__le32 fat_offset;
+	__le32 fat_length;
+	__le32 clu_offset;
+	__le32 clu_count;
+	__le32 root_cluster;
+	__le32 vol_serial;
+	__u8 fs_version[2];
+	__le16 vol_flags;
+	__u8 sect_size_bits;
+	__u8 sect_per_clus_bits;
+	__u8 num_fats;
+	__u8 phy_drv_no;
+	__u8 perc_in_use;
+	__u8 reserved2[7];
+} __packed;
+
+/* EXFAT PBR[BPB+BSX] (120 bytes) */
+struct pbr64 {
+	struct bpb64 bpb;
+	struct bsx64 bsx;
+} __packed;
+
+/* Common PBR[Partition Boot Record] (512 bytes) */
+struct pbr {
+	union {
+		__u8 raw[64];
+		struct bpb64 f64;
+	} bpb;
+	union {
+		__u8 raw[56];
+		struct bsx64 f64;
+	} bsx;
+	__u8 boot_code[390];
+	__le16 signature;
+} __packed;
+
+struct exfat_dentry {
+	__u8 type;
+	union {
+		struct {
+			__u8 num_ext;
+			__le16 checksum;
+			__le16 attr;
+			__le16 reserved1;
+			__le16 create_time;
+			__le16 create_date;
+			__le16 modify_time;
+			__le16 modify_date;
+			__le16 access_time;
+			__le16 access_date;
+			__u8 create_time_ms;
+			__u8 modify_time_ms;
+			__u8 create_tz;
+			__u8 modify_tz;
+			__u8 access_tz;
+			__u8 reserved2[7];
+		} __packed file; /* file directory entry */
+		struct {
+			__u8 flags;
+			__u8 reserved1;
+			__u8 name_len;
+			__le16 name_hash;
+			__le16 reserved2;
+			__le64 valid_size;
+			__le32 reserved3;
+			__le32 start_clu;
+			__le64 size;
+		} __packed stream; /* stream extension directory entry */
+		struct {
+			__u8 flags;
+			__le16 unicode_0_14[EXFAT_FILE_NAME_LEN];
+		} __packed name; /* file name directory entry */
+		struct {
+			__u8 flags;
+			__u8 reserved[18];
+			__le32 start_clu;
+			__le64 size;
+		} __packed bitmap; /* allocation bitmap directory entry */
+		struct {
+			__u8 reserved1[3];
+			__le32 checksum;
+			__u8 reserved2[12];
+			__le32 start_clu;
+			__le64 size;
+		} __packed upcase; /* up-case table directory entry */
+	} __packed dentry;
+} __packed;
+
+#define EXFAT_TZ_VALID		(1 << 7)
+
+/* Jan 1 GMT 00:00:00 1980 */
+#define EXFAT_MIN_TIMESTAMP_SECS    315532800LL
+/* Dec 31 GMT 23:59:59 2107 */
+#define EXFAT_MAX_TIMESTAMP_SECS    4354819199LL
+
+#endif /* !_EXFAT_RAW_H */
diff --git a/fs/exfat/fatent.c b/fs/exfat/fatent.c
new file mode 100644
index 0000000..a855b17
--- /dev/null
+++ b/fs/exfat/fatent.c
@@ -0,0 +1,463 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2012-2013 Samsung Electronics Co., Ltd.
+ */
+
+#include <linux/slab.h>
+#include <asm/unaligned.h>
+#include <linux/buffer_head.h>
+
+#include "exfat_raw.h"
+#include "exfat_fs.h"
+
+static int exfat_mirror_bh(struct super_block *sb, sector_t sec,
+		struct buffer_head *bh)
+{
+	struct buffer_head *c_bh;
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+	sector_t sec2;
+	int err = 0;
+
+	if (sbi->FAT2_start_sector != sbi->FAT1_start_sector) {
+		sec2 = sec - sbi->FAT1_start_sector + sbi->FAT2_start_sector;
+		c_bh = sb_getblk(sb, sec2);
+		if (!c_bh)
+			return -ENOMEM;
+		memcpy(c_bh->b_data, bh->b_data, sb->s_blocksize);
+		set_buffer_uptodate(c_bh);
+		mark_buffer_dirty(c_bh);
+		if (sb->s_flags & SB_SYNCHRONOUS)
+			err = sync_dirty_buffer(c_bh);
+		brelse(c_bh);
+	}
+
+	return err;
+}
+
+static int __exfat_ent_get(struct super_block *sb, unsigned int loc,
+		unsigned int *content)
+{
+	unsigned int off;
+	sector_t sec;
+	struct buffer_head *bh;
+
+	sec = FAT_ENT_OFFSET_SECTOR(sb, loc);
+	off = FAT_ENT_OFFSET_BYTE_IN_SECTOR(sb, loc);
+
+	bh = sb_bread(sb, sec);
+	if (!bh)
+		return -EIO;
+
+	*content = le32_to_cpu(*(__le32 *)(&bh->b_data[off]));
+
+	/* remap reserved clusters to simplify code */
+	if (*content > EXFAT_BAD_CLUSTER)
+		*content = EXFAT_EOF_CLUSTER;
+
+	brelse(bh);
+	return 0;
+}
+
+int exfat_ent_set(struct super_block *sb, unsigned int loc,
+		unsigned int content)
+{
+	unsigned int off;
+	sector_t sec;
+	__le32 *fat_entry;
+	struct buffer_head *bh;
+
+	sec = FAT_ENT_OFFSET_SECTOR(sb, loc);
+	off = FAT_ENT_OFFSET_BYTE_IN_SECTOR(sb, loc);
+
+	bh = sb_bread(sb, sec);
+	if (!bh)
+		return -EIO;
+
+	fat_entry = (__le32 *)&(bh->b_data[off]);
+	*fat_entry = cpu_to_le32(content);
+	exfat_update_bh(sb, bh, sb->s_flags & SB_SYNCHRONOUS);
+	exfat_mirror_bh(sb, sec, bh);
+	brelse(bh);
+	return 0;
+}
+
+static inline bool is_valid_cluster(struct exfat_sb_info *sbi,
+		unsigned int clus)
+{
+	if (clus < EXFAT_FIRST_CLUSTER || sbi->num_clusters <= clus)
+		return false;
+	return true;
+}
+
+int exfat_ent_get(struct super_block *sb, unsigned int loc,
+		unsigned int *content)
+{
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+	int err;
+
+	if (!is_valid_cluster(sbi, loc)) {
+		exfat_fs_error(sb, "invalid access to FAT (entry 0x%08x)",
+			loc);
+		return -EIO;
+	}
+
+	err = __exfat_ent_get(sb, loc, content);
+	if (err) {
+		exfat_fs_error(sb,
+			"failed to access to FAT (entry 0x%08x, err:%d)",
+			loc, err);
+		return err;
+	}
+
+	if (*content == EXFAT_FREE_CLUSTER) {
+		exfat_fs_error(sb,
+			"invalid access to FAT free cluster (entry 0x%08x)",
+			loc);
+		return -EIO;
+	}
+
+	if (*content == EXFAT_BAD_CLUSTER) {
+		exfat_fs_error(sb,
+			"invalid access to FAT bad cluster (entry 0x%08x)",
+			loc);
+		return -EIO;
+	}
+
+	if (*content != EXFAT_EOF_CLUSTER && !is_valid_cluster(sbi, *content)) {
+		exfat_fs_error(sb,
+			"invalid access to FAT (entry 0x%08x) bogus content (0x%08x)",
+			loc, *content);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+int exfat_chain_cont_cluster(struct super_block *sb, unsigned int chain,
+		unsigned int len)
+{
+	if (!len)
+		return 0;
+
+	while (len > 1) {
+		if (exfat_ent_set(sb, chain, chain + 1))
+			return -EIO;
+		chain++;
+		len--;
+	}
+
+	if (exfat_ent_set(sb, chain, EXFAT_EOF_CLUSTER))
+		return -EIO;
+	return 0;
+}
+
+int exfat_free_cluster(struct inode *inode, struct exfat_chain *p_chain)
+{
+	unsigned int num_clusters = 0;
+	unsigned int clu;
+	struct super_block *sb = inode->i_sb;
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+
+	/* invalid cluster number */
+	if (p_chain->dir == EXFAT_FREE_CLUSTER ||
+	    p_chain->dir == EXFAT_EOF_CLUSTER ||
+	    p_chain->dir < EXFAT_FIRST_CLUSTER)
+		return 0;
+
+	/* no cluster to truncate */
+	if (p_chain->size == 0)
+		return 0;
+
+	/* check cluster validation */
+	if (p_chain->dir < 2 && p_chain->dir >= sbi->num_clusters) {
+		exfat_msg(sb, KERN_ERR, "invalid start cluster (%u)",
+				p_chain->dir);
+		return -EIO;
+	}
+
+	set_bit(EXFAT_SB_DIRTY, &sbi->s_state);
+	clu = p_chain->dir;
+
+	if (p_chain->flags == ALLOC_NO_FAT_CHAIN) {
+		do {
+			exfat_clear_bitmap(inode, clu);
+			clu++;
+
+			num_clusters++;
+		} while (num_clusters < p_chain->size);
+	} else {
+		do {
+			exfat_clear_bitmap(inode, clu);
+
+			if (exfat_get_next_cluster(sb, &clu))
+				goto dec_used_clus;
+
+			num_clusters++;
+		} while (clu != EXFAT_EOF_CLUSTER);
+	}
+
+dec_used_clus:
+	sbi->used_clusters -= num_clusters;
+	return 0;
+}
+
+int exfat_find_last_cluster(struct super_block *sb, struct exfat_chain *p_chain,
+		unsigned int *ret_clu)
+{
+	unsigned int clu, next;
+	unsigned int count = 0;
+
+	next = p_chain->dir;
+	if (p_chain->flags == ALLOC_NO_FAT_CHAIN) {
+		*ret_clu = next + p_chain->size - 1;
+		return 0;
+	}
+
+	do {
+		count++;
+		clu = next;
+		if (exfat_ent_get(sb, clu, &next))
+			return -EIO;
+	} while (next != EXFAT_EOF_CLUSTER);
+
+	if (p_chain->size != count) {
+		exfat_fs_error(sb,
+			"bogus directory size (clus : ondisk(%d) != counted(%d))",
+			p_chain->size, count);
+		return -EIO;
+	}
+
+	*ret_clu = clu;
+	return 0;
+}
+
+static inline int exfat_sync_bhs(struct buffer_head **bhs, int nr_bhs)
+{
+	int i, err = 0;
+
+	for (i = 0; i < nr_bhs; i++)
+		write_dirty_buffer(bhs[i], 0);
+
+	for (i = 0; i < nr_bhs; i++) {
+		wait_on_buffer(bhs[i]);
+		if (!err && !buffer_uptodate(bhs[i]))
+			err = -EIO;
+	}
+	return err;
+}
+
+int exfat_zeroed_cluster(struct inode *dir, unsigned int clu)
+{
+	struct super_block *sb = dir->i_sb;
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+	struct buffer_head *bhs[MAX_BUF_PER_PAGE];
+	int nr_bhs = MAX_BUF_PER_PAGE;
+	sector_t blknr, last_blknr;
+	int err, i, n;
+
+	blknr = exfat_cluster_to_sector(sbi, clu);
+	last_blknr = blknr + sbi->sect_per_clus;
+
+	if (last_blknr > sbi->num_sectors && sbi->num_sectors > 0) {
+		exfat_fs_error_ratelimit(sb,
+			"%s: out of range(sect:%llu len:%u)",
+			__func__, (unsigned long long)blknr,
+			sbi->sect_per_clus);
+		return -EIO;
+	}
+
+	/* Zeroing the unused blocks on this cluster */
+	n = 0;
+	while (blknr < last_blknr) {
+		bhs[n] = sb_getblk(sb, blknr);
+		if (!bhs[n]) {
+			err = -ENOMEM;
+			goto release_bhs;
+		}
+		memset(bhs[n]->b_data, 0, sb->s_blocksize);
+		exfat_update_bh(sb, bhs[n], 0);
+
+		n++;
+		blknr++;
+
+		if (n == nr_bhs) {
+			if (IS_DIRSYNC(dir)) {
+				err = exfat_sync_bhs(bhs, n);
+				if (err)
+					goto release_bhs;
+			}
+
+			for (i = 0; i < n; i++)
+				brelse(bhs[i]);
+			n = 0;
+		}
+	}
+
+	if (IS_DIRSYNC(dir)) {
+		err = exfat_sync_bhs(bhs, n);
+		if (err)
+			goto release_bhs;
+	}
+
+	for (i = 0; i < n; i++)
+		brelse(bhs[i]);
+
+	return 0;
+
+release_bhs:
+	exfat_msg(sb, KERN_ERR, "failed zeroed sect %llu\n",
+		(unsigned long long)blknr);
+	for (i = 0; i < n; i++)
+		bforget(bhs[i]);
+	return err;
+}
+
+int exfat_alloc_cluster(struct inode *inode, unsigned int num_alloc,
+		struct exfat_chain *p_chain)
+{
+	int ret = -ENOSPC;
+	unsigned int num_clusters = 0, total_cnt;
+	unsigned int hint_clu, new_clu, last_clu = EXFAT_EOF_CLUSTER;
+	struct super_block *sb = inode->i_sb;
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+
+	total_cnt = EXFAT_DATA_CLUSTER_COUNT(sbi);
+
+	if (unlikely(total_cnt < sbi->used_clusters)) {
+		exfat_fs_error_ratelimit(sb,
+			"%s: invalid used clusters(t:%u,u:%u)\n",
+			__func__, total_cnt, sbi->used_clusters);
+		return -EIO;
+	}
+
+	if (num_alloc > total_cnt - sbi->used_clusters)
+		return -ENOSPC;
+
+	hint_clu = p_chain->dir;
+	/* find new cluster */
+	if (hint_clu == EXFAT_EOF_CLUSTER) {
+		if (sbi->clu_srch_ptr < EXFAT_FIRST_CLUSTER) {
+			exfat_msg(sb, KERN_ERR,
+				"sbi->clu_srch_ptr is invalid (%u)\n",
+				sbi->clu_srch_ptr);
+			sbi->clu_srch_ptr = EXFAT_FIRST_CLUSTER;
+		}
+
+		hint_clu = exfat_find_free_bitmap(sb, sbi->clu_srch_ptr);
+		if (hint_clu == EXFAT_EOF_CLUSTER)
+			return -ENOSPC;
+	}
+
+	/* check cluster validation */
+	if (hint_clu < EXFAT_FIRST_CLUSTER && hint_clu >= sbi->num_clusters) {
+		exfat_msg(sb, KERN_ERR, "hint_cluster is invalid (%u)\n",
+			hint_clu);
+		hint_clu = EXFAT_FIRST_CLUSTER;
+		if (p_chain->flags == ALLOC_NO_FAT_CHAIN) {
+			if (exfat_chain_cont_cluster(sb, p_chain->dir,
+					num_clusters))
+				return -EIO;
+			p_chain->flags = ALLOC_FAT_CHAIN;
+		}
+	}
+
+	set_bit(EXFAT_SB_DIRTY, &sbi->s_state);
+
+	p_chain->dir = EXFAT_EOF_CLUSTER;
+
+	while ((new_clu = exfat_find_free_bitmap(sb, hint_clu)) !=
+	       EXFAT_EOF_CLUSTER) {
+		if (new_clu != hint_clu &&
+		    p_chain->flags == ALLOC_NO_FAT_CHAIN) {
+			if (exfat_chain_cont_cluster(sb, p_chain->dir,
+					num_clusters)) {
+				ret = -EIO;
+				goto free_cluster;
+			}
+			p_chain->flags = ALLOC_FAT_CHAIN;
+		}
+
+		/* update allocation bitmap */
+		if (exfat_set_bitmap(inode, new_clu)) {
+			ret = -EIO;
+			goto free_cluster;
+		}
+
+		num_clusters++;
+
+		/* update FAT table */
+		if (p_chain->flags == ALLOC_FAT_CHAIN) {
+			if (exfat_ent_set(sb, new_clu, EXFAT_EOF_CLUSTER)) {
+				ret = -EIO;
+				goto free_cluster;
+			}
+		}
+
+		if (p_chain->dir == EXFAT_EOF_CLUSTER) {
+			p_chain->dir = new_clu;
+		} else if (p_chain->flags == ALLOC_FAT_CHAIN) {
+			if (exfat_ent_set(sb, last_clu, new_clu)) {
+				ret = -EIO;
+				goto free_cluster;
+			}
+		}
+		last_clu = new_clu;
+
+		if (--num_alloc == 0) {
+			sbi->clu_srch_ptr = hint_clu;
+			sbi->used_clusters += num_clusters;
+
+			p_chain->size += num_clusters;
+			return 0;
+		}
+
+		hint_clu = new_clu + 1;
+		if (hint_clu >= sbi->num_clusters) {
+			hint_clu = EXFAT_FIRST_CLUSTER;
+
+			if (p_chain->flags == ALLOC_NO_FAT_CHAIN) {
+				if (exfat_chain_cont_cluster(sb, p_chain->dir,
+						num_clusters)) {
+					ret = -EIO;
+					goto free_cluster;
+				}
+				p_chain->flags = ALLOC_FAT_CHAIN;
+			}
+		}
+	}
+free_cluster:
+	if (num_clusters)
+		exfat_free_cluster(inode, p_chain);
+	return ret;
+}
+
+int exfat_count_num_clusters(struct super_block *sb,
+		struct exfat_chain *p_chain, unsigned int *ret_count)
+{
+	unsigned int i, count;
+	unsigned int clu;
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+
+	if (!p_chain->dir || p_chain->dir == EXFAT_EOF_CLUSTER) {
+		*ret_count = 0;
+		return 0;
+	}
+
+	if (p_chain->flags == ALLOC_NO_FAT_CHAIN) {
+		*ret_count = p_chain->size;
+		return 0;
+	}
+
+	clu = p_chain->dir;
+	count = 0;
+	for (i = EXFAT_FIRST_CLUSTER; i < sbi->num_clusters; i++) {
+		count++;
+		if (exfat_ent_get(sb, clu, &clu))
+			return -EIO;
+		if (clu == EXFAT_EOF_CLUSTER)
+			break;
+	}
+
+	*ret_count = count;
+	return 0;
+}
diff --git a/fs/exfat/file.c b/fs/exfat/file.c
new file mode 100644
index 0000000..483f683
--- /dev/null
+++ b/fs/exfat/file.c
@@ -0,0 +1,360 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2012-2013 Samsung Electronics Co., Ltd.
+ */
+
+#include <linux/slab.h>
+#include <linux/cred.h>
+#include <linux/buffer_head.h>
+
+#include "exfat_raw.h"
+#include "exfat_fs.h"
+
+static int exfat_cont_expand(struct inode *inode, loff_t size)
+{
+	struct address_space *mapping = inode->i_mapping;
+	loff_t start = i_size_read(inode), count = size - i_size_read(inode);
+	int err, err2;
+
+	err = generic_cont_expand_simple(inode, size);
+	if (err)
+		return err;
+
+	inode->i_ctime = inode->i_mtime = current_time(inode);
+	mark_inode_dirty(inode);
+
+	if (!IS_SYNC(inode))
+		return 0;
+
+	err = filemap_fdatawrite_range(mapping, start, start + count - 1);
+	err2 = sync_mapping_buffers(mapping);
+	if (!err)
+		err = err2;
+	err2 = write_inode_now(inode, 1);
+	if (!err)
+		err = err2;
+	if (err)
+		return err;
+
+	return filemap_fdatawait_range(mapping, start, start + count - 1);
+}
+
+static bool exfat_allow_set_time(struct exfat_sb_info *sbi, struct inode *inode)
+{
+	mode_t allow_utime = sbi->options.allow_utime;
+
+	if (!uid_eq(current_fsuid(), inode->i_uid)) {
+		if (in_group_p(inode->i_gid))
+			allow_utime >>= 3;
+		if (allow_utime & MAY_WRITE)
+			return true;
+	}
+
+	/* use a default check */
+	return false;
+}
+
+static int exfat_sanitize_mode(const struct exfat_sb_info *sbi,
+		struct inode *inode, umode_t *mode_ptr)
+{
+	mode_t i_mode, mask, perm;
+
+	i_mode = inode->i_mode;
+
+	mask = (S_ISREG(i_mode) || S_ISLNK(i_mode)) ?
+		sbi->options.fs_fmask : sbi->options.fs_dmask;
+	perm = *mode_ptr & ~(S_IFMT | mask);
+
+	/* Of the r and x bits, all (subject to umask) must be present.*/
+	if ((perm & 0555) != (i_mode & 0555))
+		return -EPERM;
+
+	if (exfat_mode_can_hold_ro(inode)) {
+		/*
+		 * Of the w bits, either all (subject to umask) or none must
+		 * be present.
+		 */
+		if ((perm & 0222) && ((perm & 0222) != (0222 & ~mask)))
+			return -EPERM;
+	} else {
+		/*
+		 * If exfat_mode_can_hold_ro(inode) is false, can't change
+		 * w bits.
+		 */
+		if ((perm & 0222) != (0222 & ~mask))
+			return -EPERM;
+	}
+
+	*mode_ptr &= S_IFMT | perm;
+
+	return 0;
+}
+
+/* resize the file length */
+int __exfat_truncate(struct inode *inode, loff_t new_size)
+{
+	unsigned int num_clusters_new, num_clusters_phys;
+	unsigned int last_clu = EXFAT_FREE_CLUSTER;
+	struct exfat_chain clu;
+	struct exfat_dentry *ep, *ep2;
+	struct super_block *sb = inode->i_sb;
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+	struct exfat_inode_info *ei = EXFAT_I(inode);
+	struct exfat_entry_set_cache *es = NULL;
+	int evict = (ei->dir.dir == DIR_DELETED) ? 1 : 0;
+
+	/* check if the given file ID is opened */
+	if (ei->type != TYPE_FILE && ei->type != TYPE_DIR)
+		return -EPERM;
+
+	exfat_set_vol_flags(sb, VOL_DIRTY);
+
+	num_clusters_new = EXFAT_B_TO_CLU_ROUND_UP(i_size_read(inode), sbi);
+	num_clusters_phys =
+		EXFAT_B_TO_CLU_ROUND_UP(EXFAT_I(inode)->i_size_ondisk, sbi);
+
+	exfat_chain_set(&clu, ei->start_clu, num_clusters_phys, ei->flags);
+
+	if (new_size > 0) {
+		/*
+		 * Truncate FAT chain num_clusters after the first cluster
+		 * num_clusters = min(new, phys);
+		 */
+		unsigned int num_clusters =
+			min(num_clusters_new, num_clusters_phys);
+
+		/*
+		 * Follow FAT chain
+		 * (defensive coding - works fine even with corrupted FAT table
+		 */
+		if (clu.flags == ALLOC_NO_FAT_CHAIN) {
+			clu.dir += num_clusters;
+			clu.size -= num_clusters;
+		} else {
+			while (num_clusters > 0) {
+				last_clu = clu.dir;
+				if (exfat_get_next_cluster(sb, &(clu.dir)))
+					return -EIO;
+
+				num_clusters--;
+				clu.size--;
+			}
+		}
+	} else {
+		ei->flags = ALLOC_NO_FAT_CHAIN;
+		ei->start_clu = EXFAT_EOF_CLUSTER;
+	}
+
+	i_size_write(inode, new_size);
+
+	if (ei->type == TYPE_FILE)
+		ei->attr |= ATTR_ARCHIVE;
+
+	/* update the directory entry */
+	if (!evict) {
+		struct timespec64 ts;
+
+		es = exfat_get_dentry_set(sb, &(ei->dir), ei->entry,
+				ES_ALL_ENTRIES, &ep);
+		if (!es)
+			return -EIO;
+		ep2 = ep + 1;
+
+		ts = current_time(inode);
+		exfat_set_entry_time(sbi, &ts,
+				&ep->dentry.file.modify_tz,
+				&ep->dentry.file.modify_time,
+				&ep->dentry.file.modify_date,
+				&ep->dentry.file.modify_time_ms);
+		ep->dentry.file.attr = cpu_to_le16(ei->attr);
+
+		/* File size should be zero if there is no cluster allocated */
+		if (ei->start_clu == EXFAT_EOF_CLUSTER) {
+			ep->dentry.stream.valid_size = 0;
+			ep->dentry.stream.size = 0;
+		} else {
+			ep->dentry.stream.valid_size = cpu_to_le64(new_size);
+			ep->dentry.stream.size = ep->dentry.stream.valid_size;
+		}
+
+		if (new_size == 0) {
+			/* Any directory can not be truncated to zero */
+			WARN_ON(ei->type != TYPE_FILE);
+
+			ep2->dentry.stream.flags = ALLOC_FAT_CHAIN;
+			ep2->dentry.stream.start_clu = EXFAT_FREE_CLUSTER;
+		}
+
+		if (exfat_update_dir_chksum_with_entry_set(sb, es,
+		    inode_needs_sync(inode)))
+			return -EIO;
+		kfree(es);
+	}
+
+	/* cut off from the FAT chain */
+	if (ei->flags == ALLOC_FAT_CHAIN && last_clu != EXFAT_FREE_CLUSTER &&
+			last_clu != EXFAT_EOF_CLUSTER) {
+		if (exfat_ent_set(sb, last_clu, EXFAT_EOF_CLUSTER))
+			return -EIO;
+	}
+
+	/* invalidate cache and free the clusters */
+	/* clear exfat cache */
+	exfat_cache_inval_inode(inode);
+
+	/* hint information */
+	ei->hint_bmap.off = EXFAT_EOF_CLUSTER;
+	ei->hint_bmap.clu = EXFAT_EOF_CLUSTER;
+	if (ei->rwoffset > new_size)
+		ei->rwoffset = new_size;
+
+	/* hint_stat will be used if this is directory. */
+	ei->hint_stat.eidx = 0;
+	ei->hint_stat.clu = ei->start_clu;
+	ei->hint_femp.eidx = EXFAT_HINT_NONE;
+
+	/* free the clusters */
+	if (exfat_free_cluster(inode, &clu))
+		return -EIO;
+
+	exfat_set_vol_flags(sb, VOL_CLEAN);
+
+	return 0;
+}
+
+void exfat_truncate(struct inode *inode, loff_t size)
+{
+	struct super_block *sb = inode->i_sb;
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+	unsigned int blocksize = 1 << inode->i_blkbits;
+	loff_t aligned_size;
+	int err;
+
+	mutex_lock(&sbi->s_lock);
+	if (EXFAT_I(inode)->start_clu == 0) {
+		/*
+		 * Empty start_clu != ~0 (not allocated)
+		 */
+		exfat_fs_error(sb, "tried to truncate zeroed cluster.");
+		goto write_size;
+	}
+
+	err = __exfat_truncate(inode, i_size_read(inode));
+	if (err)
+		goto write_size;
+
+	inode->i_ctime = inode->i_mtime = current_time(inode);
+	if (IS_DIRSYNC(inode))
+		exfat_sync_inode(inode);
+	else
+		mark_inode_dirty(inode);
+
+	inode->i_blocks = ((i_size_read(inode) + (sbi->cluster_size - 1)) &
+			~(sbi->cluster_size - 1)) >> inode->i_blkbits;
+write_size:
+	aligned_size = i_size_read(inode);
+	if (aligned_size & (blocksize - 1)) {
+		aligned_size |= (blocksize - 1);
+		aligned_size++;
+	}
+
+	if (EXFAT_I(inode)->i_size_ondisk > i_size_read(inode))
+		EXFAT_I(inode)->i_size_ondisk = aligned_size;
+
+	if (EXFAT_I(inode)->i_size_aligned > i_size_read(inode))
+		EXFAT_I(inode)->i_size_aligned = aligned_size;
+	mutex_unlock(&sbi->s_lock);
+}
+
+int exfat_getattr(const struct path *path, struct kstat *stat,
+		unsigned int request_mask, unsigned int query_flags)
+{
+	struct inode *inode = d_backing_inode(path->dentry);
+	struct exfat_inode_info *ei = EXFAT_I(inode);
+
+	generic_fillattr(inode, stat);
+	stat->result_mask |= STATX_BTIME;
+	stat->btime.tv_sec = ei->i_crtime.tv_sec;
+	stat->btime.tv_nsec = ei->i_crtime.tv_nsec;
+	stat->blksize = EXFAT_SB(inode->i_sb)->cluster_size;
+	return 0;
+}
+
+int exfat_setattr(struct dentry *dentry, struct iattr *attr)
+{
+	struct exfat_sb_info *sbi = EXFAT_SB(dentry->d_sb);
+	struct inode *inode = dentry->d_inode;
+	unsigned int ia_valid;
+	int error;
+
+	if ((attr->ia_valid & ATTR_SIZE) &&
+	    attr->ia_size > i_size_read(inode)) {
+		error = exfat_cont_expand(inode, attr->ia_size);
+		if (error || attr->ia_valid == ATTR_SIZE)
+			return error;
+		attr->ia_valid &= ~ATTR_SIZE;
+	}
+
+	/* Check for setting the inode time. */
+	ia_valid = attr->ia_valid;
+	if ((ia_valid & (ATTR_MTIME_SET | ATTR_ATIME_SET | ATTR_TIMES_SET)) &&
+	    exfat_allow_set_time(sbi, inode)) {
+		attr->ia_valid &= ~(ATTR_MTIME_SET | ATTR_ATIME_SET |
+				ATTR_TIMES_SET);
+	}
+
+	error = setattr_prepare(dentry, attr);
+	attr->ia_valid = ia_valid;
+	if (error)
+		goto out;
+
+	if (((attr->ia_valid & ATTR_UID) &&
+	     !uid_eq(attr->ia_uid, sbi->options.fs_uid)) ||
+	    ((attr->ia_valid & ATTR_GID) &&
+	     !gid_eq(attr->ia_gid, sbi->options.fs_gid)) ||
+	    ((attr->ia_valid & ATTR_MODE) &&
+	     (attr->ia_mode & ~(S_IFREG | S_IFLNK | S_IFDIR | 0777)))) {
+		error = -EPERM;
+		goto out;
+	}
+
+	/*
+	 * We don't return -EPERM here. Yes, strange, but this is too
+	 * old behavior.
+	 */
+	if (attr->ia_valid & ATTR_MODE) {
+		if (exfat_sanitize_mode(sbi, inode, &attr->ia_mode) < 0)
+			attr->ia_valid &= ~ATTR_MODE;
+	}
+
+	if (attr->ia_valid & ATTR_SIZE) {
+		error = exfat_block_truncate_page(inode, attr->ia_size);
+		if (error)
+			goto out;
+
+		down_write(&EXFAT_I(inode)->truncate_lock);
+		truncate_setsize(inode, attr->ia_size);
+		exfat_truncate(inode, attr->ia_size);
+		up_write(&EXFAT_I(inode)->truncate_lock);
+	}
+
+	setattr_copy(inode, attr);
+	mark_inode_dirty(inode);
+
+out:
+	return error;
+}
+
+const struct file_operations exfat_file_operations = {
+	.llseek      = generic_file_llseek,
+	.read_iter   = generic_file_read_iter,
+	.write_iter  = generic_file_write_iter,
+	.mmap        = generic_file_mmap,
+	.fsync       = generic_file_fsync,
+	.splice_read = generic_file_splice_read,
+};
+
+const struct inode_operations exfat_file_inode_operations = {
+	.setattr     = exfat_setattr,
+	.getattr     = exfat_getattr,
+};
diff --git a/fs/exfat/inode.c b/fs/exfat/inode.c
new file mode 100644
index 0000000..0688749
--- /dev/null
+++ b/fs/exfat/inode.c
@@ -0,0 +1,671 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2012-2013 Samsung Electronics Co., Ltd.
+ */
+
+#include <linux/init.h>
+#include <linux/buffer_head.h>
+#include <linux/mpage.h>
+#include <linux/bio.h>
+#include <linux/blkdev.h>
+#include <linux/time.h>
+#include <linux/writeback.h>
+#include <linux/uio.h>
+#include <linux/random.h>
+#include <linux/iversion.h>
+
+#include "exfat_raw.h"
+#include "exfat_fs.h"
+
+static int __exfat_write_inode(struct inode *inode, int sync)
+{
+	int ret = -EIO;
+	unsigned long long on_disk_size;
+	struct exfat_dentry *ep, *ep2;
+	struct exfat_entry_set_cache *es = NULL;
+	struct super_block *sb = inode->i_sb;
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+	struct exfat_inode_info *ei = EXFAT_I(inode);
+	bool is_dir = (ei->type == TYPE_DIR) ? true : false;
+
+	if (inode->i_ino == EXFAT_ROOT_INO)
+		return 0;
+
+	/*
+	 * If the indode is already unlinked, there is no need for updating it.
+	 */
+	if (ei->dir.dir == DIR_DELETED)
+		return 0;
+
+	if (is_dir && ei->dir.dir == sbi->root_dir && ei->entry == -1)
+		return 0;
+
+	exfat_set_vol_flags(sb, VOL_DIRTY);
+
+	/* get the directory entry of given file or directory */
+	es = exfat_get_dentry_set(sb, &(ei->dir), ei->entry, ES_ALL_ENTRIES,
+		&ep);
+	if (!es)
+		return -EIO;
+	ep2 = ep + 1;
+
+	ep->dentry.file.attr = cpu_to_le16(exfat_make_attr(inode));
+
+	/* set FILE_INFO structure using the acquired struct exfat_dentry */
+	exfat_set_entry_time(sbi, &ei->i_crtime,
+			&ep->dentry.file.create_tz,
+			&ep->dentry.file.create_time,
+			&ep->dentry.file.create_date,
+			&ep->dentry.file.create_time_ms);
+	exfat_set_entry_time(sbi, &inode->i_mtime,
+			&ep->dentry.file.modify_tz,
+			&ep->dentry.file.modify_time,
+			&ep->dentry.file.modify_date,
+			&ep->dentry.file.modify_time_ms);
+	exfat_set_entry_time(sbi, &inode->i_atime,
+			&ep->dentry.file.access_tz,
+			&ep->dentry.file.access_time,
+			&ep->dentry.file.access_date,
+			NULL);
+
+	/* File size should be zero if there is no cluster allocated */
+	on_disk_size = i_size_read(inode);
+
+	if (ei->start_clu == EXFAT_EOF_CLUSTER)
+		on_disk_size = 0;
+
+	ep2->dentry.stream.valid_size = cpu_to_le64(on_disk_size);
+	ep2->dentry.stream.size = ep2->dentry.stream.valid_size;
+
+	ret = exfat_update_dir_chksum_with_entry_set(sb, es, sync);
+	kfree(es);
+	return ret;
+}
+
+int exfat_write_inode(struct inode *inode, struct writeback_control *wbc)
+{
+	int ret;
+
+	mutex_lock(&EXFAT_SB(inode->i_sb)->s_lock);
+	ret = __exfat_write_inode(inode, wbc->sync_mode == WB_SYNC_ALL);
+	mutex_unlock(&EXFAT_SB(inode->i_sb)->s_lock);
+
+	return ret;
+}
+
+void exfat_sync_inode(struct inode *inode)
+{
+	lockdep_assert_held(&EXFAT_SB(inode->i_sb)->s_lock);
+	__exfat_write_inode(inode, 1);
+}
+
+/*
+ * Input: inode, (logical) clu_offset, target allocation area
+ * Output: errcode, cluster number
+ * *clu = (~0), if it's unable to allocate a new cluster
+ */
+static int exfat_map_cluster(struct inode *inode, unsigned int clu_offset,
+		unsigned int *clu, int create)
+{
+	int ret, modified = false;
+	unsigned int last_clu;
+	struct exfat_chain new_clu;
+	struct exfat_dentry *ep;
+	struct exfat_entry_set_cache *es = NULL;
+	struct super_block *sb = inode->i_sb;
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+	struct exfat_inode_info *ei = EXFAT_I(inode);
+	unsigned int local_clu_offset = clu_offset;
+	unsigned int num_to_be_allocated = 0, num_clusters = 0;
+
+	ei->rwoffset = EXFAT_CLU_TO_B(clu_offset, sbi);
+
+	if (EXFAT_I(inode)->i_size_ondisk > 0)
+		num_clusters =
+			EXFAT_B_TO_CLU_ROUND_UP(EXFAT_I(inode)->i_size_ondisk,
+			sbi);
+
+	if (clu_offset >= num_clusters)
+		num_to_be_allocated = clu_offset - num_clusters + 1;
+
+	if (!create && (num_to_be_allocated > 0)) {
+		*clu = EXFAT_EOF_CLUSTER;
+		return 0;
+	}
+
+	*clu = last_clu = ei->start_clu;
+
+	if (ei->flags == ALLOC_NO_FAT_CHAIN) {
+		if (clu_offset > 0 && *clu != EXFAT_EOF_CLUSTER) {
+			last_clu += clu_offset - 1;
+
+			if (clu_offset == num_clusters)
+				*clu = EXFAT_EOF_CLUSTER;
+			else
+				*clu += clu_offset;
+		}
+	} else if (ei->type == TYPE_FILE) {
+		unsigned int fclus = 0;
+		int err = exfat_get_cluster(inode, clu_offset,
+				&fclus, clu, &last_clu, 1);
+		if (err)
+			return -EIO;
+
+		clu_offset -= fclus;
+	} else {
+		/* hint information */
+		if (clu_offset > 0 && ei->hint_bmap.off != EXFAT_EOF_CLUSTER &&
+		    ei->hint_bmap.off > 0 && clu_offset >= ei->hint_bmap.off) {
+			clu_offset -= ei->hint_bmap.off;
+			/* hint_bmap.clu should be valid */
+			WARN_ON(ei->hint_bmap.clu < 2);
+			*clu = ei->hint_bmap.clu;
+		}
+
+		while (clu_offset > 0 && *clu != EXFAT_EOF_CLUSTER) {
+			last_clu = *clu;
+			if (exfat_get_next_cluster(sb, clu))
+				return -EIO;
+			clu_offset--;
+		}
+	}
+
+	if (*clu == EXFAT_EOF_CLUSTER) {
+		exfat_set_vol_flags(sb, VOL_DIRTY);
+
+		new_clu.dir = (last_clu == EXFAT_EOF_CLUSTER) ?
+				EXFAT_EOF_CLUSTER : last_clu + 1;
+		new_clu.size = 0;
+		new_clu.flags = ei->flags;
+
+		/* allocate a cluster */
+		if (num_to_be_allocated < 1) {
+			/* Broken FAT (i_sze > allocated FAT) */
+			exfat_fs_error(sb, "broken FAT chain.");
+			return -EIO;
+		}
+
+		ret = exfat_alloc_cluster(inode, num_to_be_allocated, &new_clu);
+		if (ret)
+			return ret;
+
+		if (new_clu.dir == EXFAT_EOF_CLUSTER ||
+		    new_clu.dir == EXFAT_FREE_CLUSTER) {
+			exfat_fs_error(sb,
+				"bogus cluster new allocated (last_clu : %u, new_clu : %u)",
+				last_clu, new_clu.dir);
+			return -EIO;
+		}
+
+		/* append to the FAT chain */
+		if (last_clu == EXFAT_EOF_CLUSTER) {
+			if (new_clu.flags == ALLOC_FAT_CHAIN)
+				ei->flags = ALLOC_FAT_CHAIN;
+			ei->start_clu = new_clu.dir;
+			modified = true;
+		} else {
+			if (new_clu.flags != ei->flags) {
+				/* no-fat-chain bit is disabled,
+				 * so fat-chain should be synced with
+				 * alloc-bitmap
+				 */
+				exfat_chain_cont_cluster(sb, ei->start_clu,
+					num_clusters);
+				ei->flags = ALLOC_FAT_CHAIN;
+				modified = true;
+			}
+			if (new_clu.flags == ALLOC_FAT_CHAIN)
+				if (exfat_ent_set(sb, last_clu, new_clu.dir))
+					return -EIO;
+		}
+
+		num_clusters += num_to_be_allocated;
+		*clu = new_clu.dir;
+
+		if (ei->dir.dir != DIR_DELETED) {
+			es = exfat_get_dentry_set(sb, &(ei->dir), ei->entry,
+				ES_ALL_ENTRIES, &ep);
+			if (!es)
+				return -EIO;
+			/* get stream entry */
+			ep++;
+
+			/* update directory entry */
+			if (modified) {
+				if (ep->dentry.stream.flags != ei->flags)
+					ep->dentry.stream.flags = ei->flags;
+
+				if (le32_to_cpu(ep->dentry.stream.start_clu) !=
+						ei->start_clu)
+					ep->dentry.stream.start_clu =
+						cpu_to_le32(ei->start_clu);
+
+				ep->dentry.stream.valid_size =
+					cpu_to_le64(i_size_read(inode));
+				ep->dentry.stream.size =
+					ep->dentry.stream.valid_size;
+			}
+
+			if (exfat_update_dir_chksum_with_entry_set(sb, es,
+			    inode_needs_sync(inode)))
+				return -EIO;
+			kfree(es);
+
+		} /* end of if != DIR_DELETED */
+
+		inode->i_blocks +=
+			num_to_be_allocated << sbi->sect_per_clus_bits;
+
+		/*
+		 * Move *clu pointer along FAT chains (hole care) because the
+		 * caller of this function expect *clu to be the last cluster.
+		 * This only works when num_to_be_allocated >= 2,
+		 * *clu = (the first cluster of the allocated chain) =>
+		 * (the last cluster of ...)
+		 */
+		if (ei->flags == ALLOC_NO_FAT_CHAIN) {
+			*clu += num_to_be_allocated - 1;
+		} else {
+			while (num_to_be_allocated > 1) {
+				if (exfat_get_next_cluster(sb, clu))
+					return -EIO;
+				num_to_be_allocated--;
+			}
+		}
+
+	}
+
+	/* hint information */
+	ei->hint_bmap.off = local_clu_offset;
+	ei->hint_bmap.clu = *clu;
+
+	return 0;
+}
+
+static int exfat_map_new_buffer(struct exfat_inode_info *ei,
+		struct buffer_head *bh, loff_t pos)
+{
+	if (buffer_delay(bh) && pos > ei->i_size_aligned)
+		return -EIO;
+	set_buffer_new(bh);
+
+	/*
+	 * Adjust i_size_aligned if i_size_ondisk is bigger than it.
+	 */
+	if (ei->i_size_ondisk > ei->i_size_aligned)
+		ei->i_size_aligned = ei->i_size_ondisk;
+	return 0;
+}
+
+static int exfat_get_block(struct inode *inode, sector_t iblock,
+		struct buffer_head *bh_result, int create)
+{
+	struct exfat_inode_info *ei = EXFAT_I(inode);
+	struct super_block *sb = inode->i_sb;
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+	unsigned long max_blocks = bh_result->b_size >> inode->i_blkbits;
+	int err = 0;
+	unsigned long mapped_blocks = 0;
+	unsigned int cluster, sec_offset;
+	sector_t last_block;
+	sector_t phys = 0;
+	loff_t pos;
+
+	mutex_lock(&sbi->s_lock);
+	last_block = EXFAT_B_TO_BLK_ROUND_UP(i_size_read(inode), sb);
+	if (iblock >= last_block && !create)
+		goto done;
+
+	/* Is this block already allocated? */
+	err = exfat_map_cluster(inode, iblock >> sbi->sect_per_clus_bits,
+			&cluster, create);
+	if (err) {
+		if (err != -ENOSPC)
+			exfat_fs_error_ratelimit(sb,
+				"failed to bmap (inode : %p iblock : %llu, err : %d)",
+				inode, (unsigned long long)iblock, err);
+		goto unlock_ret;
+	}
+
+	if (cluster == EXFAT_EOF_CLUSTER)
+		goto done;
+
+	/* sector offset in cluster */
+	sec_offset = iblock & (sbi->sect_per_clus - 1);
+
+	phys = exfat_cluster_to_sector(sbi, cluster) + sec_offset;
+	mapped_blocks = sbi->sect_per_clus - sec_offset;
+	max_blocks = min(mapped_blocks, max_blocks);
+
+	/* Treat newly added block / cluster */
+	if (iblock < last_block)
+		create = 0;
+
+	if (create || buffer_delay(bh_result)) {
+		pos = EXFAT_BLK_TO_B((iblock + 1), sb);
+		if (ei->i_size_ondisk < pos)
+			ei->i_size_ondisk = pos;
+	}
+
+	if (create) {
+		err = exfat_map_new_buffer(ei, bh_result, pos);
+		if (err) {
+			exfat_fs_error(sb,
+					"requested for bmap out of range(pos : (%llu) > i_size_aligned(%llu)\n",
+					pos, ei->i_size_aligned);
+			goto unlock_ret;
+		}
+	}
+
+	if (buffer_delay(bh_result))
+		clear_buffer_delay(bh_result);
+	map_bh(bh_result, sb, phys);
+done:
+	bh_result->b_size = EXFAT_BLK_TO_B(max_blocks, sb);
+unlock_ret:
+	mutex_unlock(&sbi->s_lock);
+	return err;
+}
+
+static int exfat_readpage(struct file *file, struct page *page)
+{
+	return mpage_readpage(page, exfat_get_block);
+}
+
+static int exfat_readpages(struct file *file, struct address_space *mapping,
+		struct list_head *pages, unsigned int nr_pages)
+{
+	return mpage_readpages(mapping, pages, nr_pages, exfat_get_block);
+}
+
+static int exfat_writepage(struct page *page, struct writeback_control *wbc)
+{
+	return block_write_full_page(page, exfat_get_block, wbc);
+}
+
+static int exfat_writepages(struct address_space *mapping,
+		struct writeback_control *wbc)
+{
+	return mpage_writepages(mapping, wbc, exfat_get_block);
+}
+
+static void exfat_write_failed(struct address_space *mapping, loff_t to)
+{
+	struct inode *inode = mapping->host;
+
+	if (to > i_size_read(inode)) {
+		truncate_pagecache(inode, i_size_read(inode));
+		exfat_truncate(inode, EXFAT_I(inode)->i_size_aligned);
+	}
+}
+
+static int exfat_write_begin(struct file *file, struct address_space *mapping,
+		loff_t pos, unsigned int len, unsigned int flags,
+		struct page **pagep, void **fsdata)
+{
+	int ret;
+
+	*pagep = NULL;
+	ret = cont_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
+			       exfat_get_block,
+			       &EXFAT_I(mapping->host)->i_size_ondisk);
+
+	if (ret < 0)
+		exfat_write_failed(mapping, pos+len);
+
+	return ret;
+}
+
+static int exfat_write_end(struct file *file, struct address_space *mapping,
+		loff_t pos, unsigned int len, unsigned int copied,
+		struct page *pagep, void *fsdata)
+{
+	struct inode *inode = mapping->host;
+	struct exfat_inode_info *ei = EXFAT_I(inode);
+	int err;
+
+	err = generic_write_end(file, mapping, pos, len, copied, pagep, fsdata);
+
+	if (EXFAT_I(inode)->i_size_aligned < i_size_read(inode)) {
+		exfat_fs_error(inode->i_sb,
+			"invalid size(size(%llu) > aligned(%llu)\n",
+			i_size_read(inode), EXFAT_I(inode)->i_size_aligned);
+		return -EIO;
+	}
+
+	if (err < len)
+		exfat_write_failed(mapping, pos+len);
+
+	if (!(err < 0) && !(ei->attr & ATTR_ARCHIVE)) {
+		inode->i_mtime = inode->i_ctime = current_time(inode);
+		ei->attr |= ATTR_ARCHIVE;
+		mark_inode_dirty(inode);
+	}
+
+	return err;
+}
+
+static ssize_t exfat_direct_IO(struct kiocb *iocb, struct iov_iter *iter)
+{
+	struct address_space *mapping = iocb->ki_filp->f_mapping;
+	struct inode *inode = mapping->host;
+	loff_t size = iocb->ki_pos + iov_iter_count(iter);
+	int rw = iov_iter_rw(iter);
+	ssize_t ret;
+
+	if (rw == WRITE) {
+		/*
+		 * FIXME: blockdev_direct_IO() doesn't use ->write_begin(),
+		 * so we need to update the ->i_size_aligned to block boundary.
+		 *
+		 * But we must fill the remaining area or hole by nul for
+		 * updating ->i_size_aligned
+		 *
+		 * Return 0, and fallback to normal buffered write.
+		 */
+		if (EXFAT_I(inode)->i_size_aligned < size)
+			return 0;
+	}
+
+	/*
+	 * Need to use the DIO_LOCKING for avoiding the race
+	 * condition of exfat_get_block() and ->truncate().
+	 */
+	ret = blockdev_direct_IO(iocb, inode, iter, exfat_get_block);
+	if (ret < 0 && (rw & WRITE))
+		exfat_write_failed(mapping, size);
+	return ret;
+}
+
+static sector_t exfat_aop_bmap(struct address_space *mapping, sector_t block)
+{
+	sector_t blocknr;
+
+	/* exfat_get_cluster() assumes the requested blocknr isn't truncated. */
+	down_read(&EXFAT_I(mapping->host)->truncate_lock);
+	blocknr = generic_block_bmap(mapping, block, exfat_get_block);
+	up_read(&EXFAT_I(mapping->host)->truncate_lock);
+	return blocknr;
+}
+
+/*
+ * exfat_block_truncate_page() zeroes out a mapping from file offset `from'
+ * up to the end of the block which corresponds to `from'.
+ * This is required during truncate to physically zeroout the tail end
+ * of that block so it doesn't yield old data if the file is later grown.
+ * Also, avoid causing failure from fsx for cases of "data past EOF"
+ */
+int exfat_block_truncate_page(struct inode *inode, loff_t from)
+{
+	return block_truncate_page(inode->i_mapping, from, exfat_get_block);
+}
+
+static const struct address_space_operations exfat_aops = {
+	.readpage	= exfat_readpage,
+	.readpages	= exfat_readpages,
+	.writepage	= exfat_writepage,
+	.writepages	= exfat_writepages,
+	.write_begin	= exfat_write_begin,
+	.write_end	= exfat_write_end,
+	.direct_IO	= exfat_direct_IO,
+	.bmap		= exfat_aop_bmap
+};
+
+static inline unsigned long exfat_hash(loff_t i_pos)
+{
+	return hash_32(i_pos, EXFAT_HASH_BITS);
+}
+
+void exfat_hash_inode(struct inode *inode, loff_t i_pos)
+{
+	struct exfat_sb_info *sbi = EXFAT_SB(inode->i_sb);
+	struct hlist_head *head = sbi->inode_hashtable + exfat_hash(i_pos);
+
+	spin_lock(&sbi->inode_hash_lock);
+	EXFAT_I(inode)->i_pos = i_pos;
+	hlist_add_head(&EXFAT_I(inode)->i_hash_fat, head);
+	spin_unlock(&sbi->inode_hash_lock);
+}
+
+void exfat_unhash_inode(struct inode *inode)
+{
+	struct exfat_sb_info *sbi = EXFAT_SB(inode->i_sb);
+
+	spin_lock(&sbi->inode_hash_lock);
+	hlist_del_init(&EXFAT_I(inode)->i_hash_fat);
+	EXFAT_I(inode)->i_pos = 0;
+	spin_unlock(&sbi->inode_hash_lock);
+}
+
+struct inode *exfat_iget(struct super_block *sb, loff_t i_pos)
+{
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+	struct exfat_inode_info *info;
+	struct hlist_head *head = sbi->inode_hashtable + exfat_hash(i_pos);
+	struct inode *inode = NULL;
+
+	spin_lock(&sbi->inode_hash_lock);
+	hlist_for_each_entry(info, head, i_hash_fat) {
+		WARN_ON(info->vfs_inode.i_sb != sb);
+
+		if (i_pos != info->i_pos)
+			continue;
+		inode = igrab(&info->vfs_inode);
+		if (inode)
+			break;
+	}
+	spin_unlock(&sbi->inode_hash_lock);
+	return inode;
+}
+
+/* doesn't deal with root inode */
+static int exfat_fill_inode(struct inode *inode, struct exfat_dir_entry *info)
+{
+	struct exfat_sb_info *sbi = EXFAT_SB(inode->i_sb);
+	struct exfat_inode_info *ei = EXFAT_I(inode);
+	loff_t size = info->size;
+
+	memcpy(&ei->dir, &info->dir, sizeof(struct exfat_chain));
+	ei->entry = info->entry;
+	ei->attr = info->attr;
+	ei->start_clu = info->start_clu;
+	ei->flags = info->flags;
+	ei->type = info->type;
+
+	ei->version = 0;
+	ei->hint_stat.eidx = 0;
+	ei->hint_stat.clu = info->start_clu;
+	ei->hint_femp.eidx = EXFAT_HINT_NONE;
+	ei->rwoffset = 0;
+	ei->hint_bmap.off = EXFAT_EOF_CLUSTER;
+	ei->i_pos = 0;
+
+	inode->i_uid = sbi->options.fs_uid;
+	inode->i_gid = sbi->options.fs_gid;
+	inode_inc_iversion(inode);
+	inode->i_generation = prandom_u32();
+
+	if (info->attr & ATTR_SUBDIR) { /* directory */
+		inode->i_generation &= ~1;
+		inode->i_mode = exfat_make_mode(sbi, info->attr, 0777);
+		inode->i_op = &exfat_dir_inode_operations;
+		inode->i_fop = &exfat_dir_operations;
+		set_nlink(inode, info->num_subdirs);
+	} else { /* regular file */
+		inode->i_generation |= 1;
+		inode->i_mode = exfat_make_mode(sbi, info->attr, 0777);
+		inode->i_op = &exfat_file_inode_operations;
+		inode->i_fop = &exfat_file_operations;
+		inode->i_mapping->a_ops = &exfat_aops;
+		inode->i_mapping->nrpages = 0;
+	}
+
+	i_size_write(inode, size);
+
+	/* ondisk and aligned size should be aligned with block size */
+	if (size & (inode->i_sb->s_blocksize - 1)) {
+		size |= (inode->i_sb->s_blocksize - 1);
+		size++;
+	}
+
+	ei->i_size_aligned = size;
+	ei->i_size_ondisk = size;
+
+	exfat_save_attr(inode, info->attr);
+
+	inode->i_blocks = ((i_size_read(inode) + (sbi->cluster_size - 1)) &
+		~(sbi->cluster_size - 1)) >> inode->i_blkbits;
+	inode->i_mtime = info->mtime;
+	inode->i_ctime = info->mtime;
+	ei->i_crtime = info->crtime;
+	inode->i_atime = info->atime;
+
+	exfat_cache_init_inode(inode);
+
+	return 0;
+}
+
+struct inode *exfat_build_inode(struct super_block *sb,
+		struct exfat_dir_entry *info, loff_t i_pos)
+{
+	struct inode *inode;
+	int err;
+
+	inode = exfat_iget(sb, i_pos);
+	if (inode)
+		goto out;
+	inode = new_inode(sb);
+	if (!inode) {
+		inode = ERR_PTR(-ENOMEM);
+		goto out;
+	}
+	inode->i_ino = iunique(sb, EXFAT_ROOT_INO);
+	inode_set_iversion(inode, 1);
+	err = exfat_fill_inode(inode, info);
+	if (err) {
+		iput(inode);
+		inode = ERR_PTR(err);
+		goto out;
+	}
+	exfat_hash_inode(inode, i_pos);
+	insert_inode_hash(inode);
+out:
+	return inode;
+}
+
+void exfat_evict_inode(struct inode *inode)
+{
+	truncate_inode_pages(&inode->i_data, 0);
+
+	if (!inode->i_nlink) {
+		i_size_write(inode, 0);
+		mutex_lock(&EXFAT_SB(inode->i_sb)->s_lock);
+		__exfat_truncate(inode, 0);
+		mutex_unlock(&EXFAT_SB(inode->i_sb)->s_lock);
+	}
+
+	invalidate_inode_buffers(inode);
+	clear_inode(inode);
+	exfat_cache_inval_inode(inode);
+	exfat_unhash_inode(inode);
+}
diff --git a/fs/exfat/misc.c b/fs/exfat/misc.c
new file mode 100644
index 0000000..14a3300
--- /dev/null
+++ b/fs/exfat/misc.c
@@ -0,0 +1,163 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Written 1992,1993 by Werner Almesberger
+ *  22/11/2000 - Fixed fat_date_unix2dos for dates earlier than 01/01/1980
+ *		 and date_dos2unix for date==0 by Igor Zhbanov(bsg@uniyar.ac.ru)
+ * Copyright (C) 2012-2013 Samsung Electronics Co., Ltd.
+ */
+
+#include <linux/time.h>
+#include <linux/fs.h>
+#include <linux/slab.h>
+#include <linux/buffer_head.h>
+
+#include "exfat_raw.h"
+#include "exfat_fs.h"
+
+/*
+ * exfat_fs_error reports a file system problem that might indicate fa data
+ * corruption/inconsistency. Depending on 'errors' mount option the
+ * panic() is called, or error message is printed FAT and nothing is done,
+ * or filesystem is remounted read-only (default behavior).
+ * In case the file system is remounted read-only, it can be made writable
+ * again by remounting it.
+ */
+void __exfat_fs_error(struct super_block *sb, int report, const char *fmt, ...)
+{
+	struct exfat_mount_options *opts = &EXFAT_SB(sb)->options;
+	va_list args;
+	struct va_format vaf;
+
+	if (report) {
+		va_start(args, fmt);
+		vaf.fmt = fmt;
+		vaf.va = &args;
+		exfat_msg(sb, KERN_ERR, "error, %pV\n", &vaf);
+		va_end(args);
+	}
+
+	if (opts->errors == EXFAT_ERRORS_PANIC) {
+		panic("exFAT-fs (%s): fs panic from previous error\n",
+			sb->s_id);
+	} else if (opts->errors == EXFAT_ERRORS_RO && !sb_rdonly(sb)) {
+		sb->s_flags |= SB_RDONLY;
+		exfat_msg(sb, KERN_ERR, "Filesystem has been set read-only");
+	}
+}
+
+/*
+ * exfat_msg() - print preformated EXFAT specific messages.
+ * All logs except what uses exfat_fs_error() should be written by exfat_msg()
+ */
+void exfat_msg(struct super_block *sb, const char *level, const char *fmt, ...)
+{
+	struct va_format vaf;
+	va_list args;
+
+	va_start(args, fmt);
+	vaf.fmt = fmt;
+	vaf.va = &args;
+	/* level means KERN_ pacility level */
+	printk("%sexFAT-fs (%s): %pV\n", level, sb->s_id, &vaf);
+	va_end(args);
+}
+
+#define SECS_PER_MIN    (60)
+#define TIMEZONE_SEC(x)	((x) * 15 * SECS_PER_MIN)
+
+static void exfat_adjust_tz(struct timespec64 *ts, u8 tz_off)
+{
+	if (tz_off <= 0x3F)
+		ts->tv_sec -= TIMEZONE_SEC(tz_off);
+	else /* 0x40 <= (tz_off & 0x7F) <=0x7F */
+		ts->tv_sec += TIMEZONE_SEC(0x80 - tz_off);
+}
+
+/* Convert a EXFAT time/date pair to a UNIX date (seconds since 1 1 70). */
+void exfat_get_entry_time(struct exfat_sb_info *sbi, struct timespec64 *ts,
+		u8 tz, __le16 time, __le16 date, u8 time_ms)
+{
+	u16 t = le16_to_cpu(time);
+	u16 d = le16_to_cpu(date);
+
+	ts->tv_sec = mktime64(1980 + (d >> 9), d >> 5 & 0x000F, d & 0x001F,
+			      t >> 11, (t >> 5) & 0x003F, (t & 0x001F) << 1);
+
+
+	/* time_ms field represent 0 ~ 199(1990 ms) */
+	if (time_ms) {
+		ts->tv_sec += time_ms / 100;
+		ts->tv_nsec = (time_ms % 100) * 10 * NSEC_PER_MSEC;
+	}
+
+	if (tz & EXFAT_TZ_VALID)
+		/* Adjust timezone to UTC0. */
+		exfat_adjust_tz(ts, tz & ~EXFAT_TZ_VALID);
+	else
+		/* Convert from local time to UTC using time_offset. */
+		ts->tv_sec -= sbi->options.time_offset * SECS_PER_MIN;
+}
+
+/* Convert linear UNIX date to a EXFAT time/date pair. */
+void exfat_set_entry_time(struct exfat_sb_info *sbi, struct timespec64 *ts,
+		u8 *tz, __le16 *time, __le16 *date, u8 *time_ms)
+{
+	struct tm tm;
+	u16 t, d;
+
+	time64_to_tm(ts->tv_sec, 0, &tm);
+	t = (tm.tm_hour << 11) | (tm.tm_min << 5) | (tm.tm_sec >> 1);
+	d = ((tm.tm_year - 80) <<  9) | ((tm.tm_mon + 1) << 5) | tm.tm_mday;
+
+	*time = cpu_to_le16(t);
+	*date = cpu_to_le16(d);
+
+	/* time_ms field represent 0 ~ 199(1990 ms) */
+	if (time_ms)
+		*time_ms = (tm.tm_sec & 1) * 100 +
+			ts->tv_nsec / (10 * NSEC_PER_MSEC);
+
+	/*
+	 * Record 00h value for OffsetFromUtc field and 1 value for OffsetValid
+	 * to indicate that local time and UTC are the same.
+	 */
+	*tz = EXFAT_TZ_VALID;
+}
+
+unsigned short exfat_calc_chksum_2byte(void *data, int len,
+		unsigned short chksum, int type)
+{
+	int i;
+	unsigned char *c = (unsigned char *)data;
+
+	for (i = 0; i < len; i++, c++) {
+		if (((i == 2) || (i == 3)) && (type == CS_DIR_ENTRY))
+			continue;
+		chksum = (((chksum & 1) << 15) | ((chksum & 0xFFFE) >> 1)) +
+			(unsigned short)*c;
+	}
+	return chksum;
+}
+
+void exfat_update_bh(struct super_block *sb, struct buffer_head *bh, int sync)
+{
+	set_bit(EXFAT_SB_DIRTY, &EXFAT_SB(sb)->s_state);
+	set_buffer_uptodate(bh);
+	mark_buffer_dirty(bh);
+
+	if (sync)
+		sync_dirty_buffer(bh);
+}
+
+void exfat_chain_set(struct exfat_chain *ec, unsigned int dir,
+		unsigned int size, unsigned char flags)
+{
+	ec->dir = dir;
+	ec->size = size;
+	ec->flags = flags;
+}
+
+void exfat_chain_dup(struct exfat_chain *dup, struct exfat_chain *ec)
+{
+	return exfat_chain_set(dup, ec->dir, ec->size, ec->flags);
+}
diff --git a/fs/exfat/namei.c b/fs/exfat/namei.c
new file mode 100644
index 0000000..a8681d9
--- /dev/null
+++ b/fs/exfat/namei.c
@@ -0,0 +1,1448 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2012-2013 Samsung Electronics Co., Ltd.
+ */
+
+#include <linux/iversion.h>
+#include <linux/namei.h>
+#include <linux/slab.h>
+#include <linux/buffer_head.h>
+#include <linux/nls.h>
+
+#include "exfat_raw.h"
+#include "exfat_fs.h"
+
+static inline unsigned long exfat_d_version(struct dentry *dentry)
+{
+	return (unsigned long) dentry->d_fsdata;
+}
+
+static inline void exfat_d_version_set(struct dentry *dentry,
+		unsigned long version)
+{
+	dentry->d_fsdata = (void *) version;
+}
+
+/*
+ * If new entry was created in the parent, it could create the 8.3 alias (the
+ * shortname of logname).  So, the parent may have the negative-dentry which
+ * matches the created 8.3 alias.
+ *
+ * If it happened, the negative dentry isn't actually negative anymore.  So,
+ * drop it.
+ */
+static int exfat_d_revalidate(struct dentry *dentry, unsigned int flags)
+{
+	int ret;
+
+	if (flags & LOOKUP_RCU)
+		return -ECHILD;
+
+	/*
+	 * This is not negative dentry. Always valid.
+	 *
+	 * Note, rename() to existing directory entry will have ->d_inode, and
+	 * will use existing name which isn't specified name by user.
+	 *
+	 * We may be able to drop this positive dentry here. But dropping
+	 * positive dentry isn't good idea. So it's unsupported like
+	 * rename("filename", "FILENAME") for now.
+	 */
+	if (d_really_is_positive(dentry))
+		return 1;
+
+	/*
+	 * Drop the negative dentry, in order to make sure to use the case
+	 * sensitive name which is specified by user if this is for creation.
+	 */
+	if (flags & (LOOKUP_CREATE | LOOKUP_RENAME_TARGET))
+		return 0;
+
+	spin_lock(&dentry->d_lock);
+	ret = inode_eq_iversion(d_inode(dentry->d_parent),
+			exfat_d_version(dentry));
+	spin_unlock(&dentry->d_lock);
+	return ret;
+}
+
+/* returns the length of a struct qstr, ignoring trailing dots */
+static unsigned int exfat_striptail_len(unsigned int len, const char *name)
+{
+	while (len && name[len - 1] == '.')
+		len--;
+	return len;
+}
+
+/*
+ * Compute the hash for the exfat name corresponding to the dentry.  If the name
+ * is invalid, we leave the hash code unchanged so that the existing dentry can
+ * be used. The exfat fs routines will return ENOENT or EINVAL as appropriate.
+ */
+static int exfat_d_hash(const struct dentry *dentry, struct qstr *qstr)
+{
+	struct super_block *sb = dentry->d_sb;
+	struct nls_table *t = EXFAT_SB(sb)->nls_io;
+	const unsigned char *name = qstr->name;
+	unsigned int len = exfat_striptail_len(qstr->len, qstr->name);
+	unsigned long hash = init_name_hash(dentry);
+	int i, charlen;
+	wchar_t c;
+
+	for (i = 0; i < len; i += charlen) {
+		charlen = t->char2uni(&name[i], len - i, &c);
+		if (charlen < 0)
+			return charlen;
+		hash = partial_name_hash(exfat_toupper(sb, c), hash);
+	}
+
+	qstr->hash = end_name_hash(hash);
+	return 0;
+}
+
+static int exfat_d_cmp(const struct dentry *dentry, unsigned int len,
+		const char *str, const struct qstr *name)
+{
+	struct super_block *sb = dentry->d_sb;
+	struct nls_table *t = EXFAT_SB(sb)->nls_io;
+	unsigned int alen = exfat_striptail_len(name->len, name->name);
+	unsigned int blen = exfat_striptail_len(len, str);
+	wchar_t c1, c2;
+	int charlen, i;
+
+	if (alen != blen)
+		return 1;
+
+	for (i = 0; i < len; i += charlen) {
+		charlen = t->char2uni(&name->name[i], alen - i, &c1);
+		if (charlen < 0)
+			return 1;
+		if (charlen != t->char2uni(&str[i], blen - i, &c2))
+			return 1;
+
+		if (exfat_toupper(sb, c1) != exfat_toupper(sb, c2))
+			return 1;
+	}
+
+	return 0;
+}
+
+const struct dentry_operations exfat_dentry_ops = {
+	.d_revalidate	= exfat_d_revalidate,
+	.d_hash		= exfat_d_hash,
+	.d_compare	= exfat_d_cmp,
+};
+
+static int exfat_utf8_d_hash(const struct dentry *dentry, struct qstr *qstr)
+{
+	struct super_block *sb = dentry->d_sb;
+	const unsigned char *name = qstr->name;
+	unsigned int len = exfat_striptail_len(qstr->len, qstr->name);
+	unsigned long hash = init_name_hash(dentry);
+	int i, charlen;
+	unicode_t u;
+
+	for (i = 0; i < len; i += charlen) {
+		charlen = utf8_to_utf32(&name[i], len - i, &u);
+		if (charlen < 0)
+			return charlen;
+
+		/*
+		 * Convert to UTF-16: code points above U+FFFF are encoded as
+		 * surrogate pairs.
+		 * exfat_toupper() works only for code points up to the U+FFFF.
+		 */
+		if (u > 0xFFFF) {
+			hash = partial_name_hash(exfat_high_surrogate(u), hash);
+			hash = partial_name_hash(exfat_low_surrogate(u), hash);
+		} else {
+			hash = partial_name_hash(exfat_toupper(sb, u), hash);
+		}
+	}
+
+	qstr->hash = end_name_hash(hash);
+	return 0;
+}
+
+static int exfat_utf8_d_cmp(const struct dentry *dentry, unsigned int len,
+		const char *str, const struct qstr *name)
+{
+	struct super_block *sb = dentry->d_sb;
+	unsigned int alen = exfat_striptail_len(name->len, name->name);
+	unsigned int blen = exfat_striptail_len(len, str);
+	unicode_t u_a, u_b;
+	int charlen, i;
+
+	if (alen != blen)
+		return 1;
+
+	for (i = 0; i < alen; i += charlen) {
+		charlen = utf8_to_utf32(&name->name[i], alen - i, &u_a);
+		if (charlen < 0)
+			return 1;
+		if (charlen != utf8_to_utf32(&str[i], blen - i, &u_b))
+			return 1;
+
+		if (u_a <= 0xFFFF && u_b <= 0xFFFF) {
+			if (exfat_toupper(sb, u_a) != exfat_toupper(sb, u_b))
+				return 1;
+		} else if (u_a > 0xFFFF && u_b > 0xFFFF) {
+			if (exfat_low_surrogate(u_a) !=
+					exfat_low_surrogate(u_b) ||
+			    exfat_high_surrogate(u_a) !=
+					exfat_high_surrogate(u_b))
+				return 1;
+		} else {
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
+const struct dentry_operations exfat_utf8_dentry_ops = {
+	.d_revalidate	= exfat_d_revalidate,
+	.d_hash		= exfat_utf8_d_hash,
+	.d_compare	= exfat_utf8_d_cmp,
+};
+
+/* used only in search empty_slot() */
+#define CNT_UNUSED_NOHIT        (-1)
+#define CNT_UNUSED_HIT          (-2)
+/* search EMPTY CONTINUOUS "num_entries" entries */
+static int exfat_search_empty_slot(struct super_block *sb,
+		struct exfat_hint_femp *hint_femp, struct exfat_chain *p_dir,
+		int num_entries)
+{
+	int i, dentry, num_empty = 0;
+	int dentries_per_clu;
+	unsigned int type;
+	struct exfat_chain clu;
+	struct exfat_dentry *ep;
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+	struct buffer_head *bh;
+
+	dentries_per_clu = sbi->dentries_per_clu;
+
+	if (hint_femp->eidx != EXFAT_HINT_NONE) {
+		dentry = hint_femp->eidx;
+		if (num_entries <= hint_femp->count) {
+			hint_femp->eidx = EXFAT_HINT_NONE;
+			return dentry;
+		}
+
+		exfat_chain_dup(&clu, &hint_femp->cur);
+	} else {
+		exfat_chain_dup(&clu, p_dir);
+		dentry = 0;
+	}
+
+	while (clu.dir != EXFAT_EOF_CLUSTER) {
+		i = dentry & (dentries_per_clu - 1);
+
+		for (; i < dentries_per_clu; i++, dentry++) {
+			ep = exfat_get_dentry(sb, &clu, i, &bh, NULL);
+			if (!ep)
+				return -EIO;
+			type = exfat_get_entry_type(ep);
+			brelse(bh);
+
+			if (type == TYPE_UNUSED || type == TYPE_DELETED) {
+				num_empty++;
+				if (hint_femp->eidx == EXFAT_HINT_NONE) {
+					hint_femp->eidx = dentry;
+					hint_femp->count = CNT_UNUSED_NOHIT;
+					exfat_chain_set(&hint_femp->cur,
+						clu.dir, clu.size, clu.flags);
+				}
+
+				if (type == TYPE_UNUSED &&
+				    hint_femp->count != CNT_UNUSED_HIT)
+					hint_femp->count = CNT_UNUSED_HIT;
+			} else {
+				if (hint_femp->eidx != EXFAT_HINT_NONE &&
+				    hint_femp->count == CNT_UNUSED_HIT) {
+					/* unused empty group means
+					 * an empty group which includes
+					 * unused dentry
+					 */
+					exfat_fs_error(sb,
+						"found bogus dentry(%d) beyond unused empty group(%d) (start_clu : %u, cur_clu : %u)",
+						dentry, hint_femp->eidx,
+						p_dir->dir, clu.dir);
+					return -EIO;
+				}
+
+				num_empty = 0;
+				hint_femp->eidx = EXFAT_HINT_NONE;
+			}
+
+			if (num_empty >= num_entries) {
+				/* found and invalidate hint_femp */
+				hint_femp->eidx = EXFAT_HINT_NONE;
+				return (dentry - (num_entries - 1));
+			}
+		}
+
+		if (clu.flags == ALLOC_NO_FAT_CHAIN) {
+			if (--clu.size > 0)
+				clu.dir++;
+			else
+				clu.dir = EXFAT_EOF_CLUSTER;
+		} else {
+			if (exfat_get_next_cluster(sb, &clu.dir))
+				return -EIO;
+		}
+	}
+
+	return -ENOSPC;
+}
+
+static int exfat_check_max_dentries(struct inode *inode)
+{
+	if (EXFAT_B_TO_DEN(i_size_read(inode)) >= MAX_EXFAT_DENTRIES) {
+		/*
+		 * exFAT spec allows a dir to grow upto 8388608(256MB)
+		 * dentries
+		 */
+		return -ENOSPC;
+	}
+	return 0;
+}
+
+/* find empty directory entry.
+ * if there isn't any empty slot, expand cluster chain.
+ */
+static int exfat_find_empty_entry(struct inode *inode,
+		struct exfat_chain *p_dir, int num_entries)
+{
+	int dentry;
+	unsigned int ret, last_clu;
+	sector_t sector;
+	loff_t size = 0;
+	struct exfat_chain clu;
+	struct exfat_dentry *ep = NULL;
+	struct super_block *sb = inode->i_sb;
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+	struct exfat_inode_info *ei = EXFAT_I(inode);
+	struct exfat_hint_femp hint_femp;
+
+	hint_femp.eidx = EXFAT_HINT_NONE;
+
+	if (ei->hint_femp.eidx != EXFAT_HINT_NONE) {
+		memcpy(&hint_femp, &ei->hint_femp,
+				sizeof(struct exfat_hint_femp));
+		ei->hint_femp.eidx = EXFAT_HINT_NONE;
+	}
+
+	while ((dentry = exfat_search_empty_slot(sb, &hint_femp, p_dir,
+					num_entries)) < 0) {
+		if (dentry == -EIO)
+			break;
+
+		if (exfat_check_max_dentries(inode))
+			return -ENOSPC;
+
+		/* we trust p_dir->size regardless of FAT type */
+		if (exfat_find_last_cluster(sb, p_dir, &last_clu))
+			return -EIO;
+
+		/*
+		 * Allocate new cluster to this directory
+		 */
+		exfat_chain_set(&clu, last_clu + 1, 0, p_dir->flags);
+
+		/* allocate a cluster */
+		ret = exfat_alloc_cluster(inode, 1, &clu);
+		if (ret)
+			return ret;
+
+		if (exfat_zeroed_cluster(inode, clu.dir))
+			return -EIO;
+
+		/* append to the FAT chain */
+		if (clu.flags != p_dir->flags) {
+			/* no-fat-chain bit is disabled,
+			 * so fat-chain should be synced with alloc-bitmap
+			 */
+			exfat_chain_cont_cluster(sb, p_dir->dir, p_dir->size);
+			p_dir->flags = ALLOC_FAT_CHAIN;
+			hint_femp.cur.flags = ALLOC_FAT_CHAIN;
+		}
+
+		if (clu.flags == ALLOC_FAT_CHAIN)
+			if (exfat_ent_set(sb, last_clu, clu.dir))
+				return -EIO;
+
+		if (hint_femp.eidx == EXFAT_HINT_NONE) {
+			/* the special case that new dentry
+			 * should be allocated from the start of new cluster
+			 */
+			hint_femp.eidx = EXFAT_B_TO_DEN_IDX(p_dir->size, sbi);
+			hint_femp.count = sbi->dentries_per_clu;
+
+			exfat_chain_set(&hint_femp.cur, clu.dir, 0, clu.flags);
+		}
+		hint_femp.cur.size++;
+		p_dir->size++;
+		size = EXFAT_CLU_TO_B(p_dir->size, sbi);
+
+		/* update the directory entry */
+		if (p_dir->dir != sbi->root_dir) {
+			struct buffer_head *bh;
+
+			ep = exfat_get_dentry(sb,
+				&(ei->dir), ei->entry + 1, &bh, &sector);
+			if (!ep)
+				return -EIO;
+
+			ep->dentry.stream.valid_size = cpu_to_le64(size);
+			ep->dentry.stream.size = ep->dentry.stream.valid_size;
+			ep->dentry.stream.flags = p_dir->flags;
+			exfat_update_bh(sb, bh, IS_DIRSYNC(inode));
+			brelse(bh);
+			if (exfat_update_dir_chksum(inode, &(ei->dir),
+			    ei->entry))
+				return -EIO;
+		}
+
+		/* directory inode should be updated in here */
+		i_size_write(inode, size);
+		EXFAT_I(inode)->i_size_ondisk += sbi->cluster_size;
+		EXFAT_I(inode)->i_size_aligned += sbi->cluster_size;
+		EXFAT_I(inode)->flags = p_dir->flags;
+		inode->i_blocks += 1 << sbi->sect_per_clus_bits;
+	}
+
+	return dentry;
+}
+
+/*
+ * Name Resolution Functions :
+ * Zero if it was successful; otherwise nonzero.
+ */
+static int __exfat_resolve_path(struct inode *inode, const unsigned char *path,
+		struct exfat_chain *p_dir, struct exfat_uni_name *p_uniname,
+		int lookup)
+{
+	int namelen;
+	int lossy = NLS_NAME_NO_LOSSY;
+	struct super_block *sb = inode->i_sb;
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+	struct exfat_inode_info *ei = EXFAT_I(inode);
+
+	/* strip all trailing periods */
+	namelen = exfat_striptail_len(strlen(path), path);
+	if (!namelen)
+		return -ENOENT;
+
+	if (strlen(path) > (MAX_NAME_LENGTH * MAX_CHARSET_SIZE))
+		return -ENAMETOOLONG;
+
+	/*
+	 * strip all leading spaces :
+	 * "MS windows 7" supports leading spaces.
+	 * So we should skip this preprocessing for compatibility.
+	 */
+
+	/* file name conversion :
+	 * If lookup case, we allow bad-name for compatibility.
+	 */
+	namelen = exfat_nls_to_utf16(sb, path, namelen, p_uniname,
+			&lossy);
+	if (namelen < 0)
+		return namelen; /* return error value */
+
+	if ((lossy && !lookup) || !namelen)
+		return -EINVAL;
+
+	exfat_chain_set(p_dir, ei->start_clu,
+		EXFAT_B_TO_CLU(i_size_read(inode), sbi), ei->flags);
+
+	return 0;
+}
+
+static inline int exfat_resolve_path(struct inode *inode,
+		const unsigned char *path, struct exfat_chain *dir,
+		struct exfat_uni_name *uni)
+{
+	return __exfat_resolve_path(inode, path, dir, uni, 0);
+}
+
+static inline int exfat_resolve_path_for_lookup(struct inode *inode,
+		const unsigned char *path, struct exfat_chain *dir,
+		struct exfat_uni_name *uni)
+{
+	return __exfat_resolve_path(inode, path, dir, uni, 1);
+}
+
+static inline loff_t exfat_make_i_pos(struct exfat_dir_entry *info)
+{
+	return ((loff_t) info->dir.dir << 32) | (info->entry & 0xffffffff);
+}
+
+static int exfat_add_entry(struct inode *inode, const char *path,
+		struct exfat_chain *p_dir, unsigned int type,
+		struct exfat_dir_entry *info)
+{
+	int ret, dentry, num_entries;
+	struct super_block *sb = inode->i_sb;
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+	struct exfat_uni_name uniname;
+	struct exfat_chain clu;
+	int clu_size = 0;
+	unsigned int start_clu = EXFAT_FREE_CLUSTER;
+
+	ret = exfat_resolve_path(inode, path, p_dir, &uniname);
+	if (ret)
+		goto out;
+
+	num_entries = exfat_calc_num_entries(&uniname);
+	if (num_entries < 0) {
+		ret = num_entries;
+		goto out;
+	}
+
+	/* exfat_find_empty_entry must be called before alloc_cluster() */
+	dentry = exfat_find_empty_entry(inode, p_dir, num_entries);
+	if (dentry < 0) {
+		ret = dentry; /* -EIO or -ENOSPC */
+		goto out;
+	}
+
+	if (type == TYPE_DIR) {
+		ret = exfat_alloc_new_dir(inode, &clu);
+		if (ret)
+			goto out;
+		start_clu = clu.dir;
+		clu_size = sbi->cluster_size;
+	}
+
+	/* update the directory entry */
+	/* fill the dos name directory entry information of the created file.
+	 * the first cluster is not determined yet. (0)
+	 */
+	ret = exfat_init_dir_entry(inode, p_dir, dentry, type,
+		start_clu, clu_size);
+	if (ret)
+		goto out;
+
+	ret = exfat_init_ext_entry(inode, p_dir, dentry, num_entries, &uniname);
+	if (ret)
+		goto out;
+
+	memcpy(&info->dir, p_dir, sizeof(struct exfat_chain));
+	info->entry = dentry;
+	info->flags = ALLOC_NO_FAT_CHAIN;
+	info->type = type;
+
+	if (type == TYPE_FILE) {
+		info->attr = ATTR_ARCHIVE;
+		info->start_clu = EXFAT_EOF_CLUSTER;
+		info->size = 0;
+		info->num_subdirs = 0;
+	} else {
+		int count;
+		struct exfat_chain cdir;
+
+		info->attr = ATTR_SUBDIR;
+		info->start_clu = start_clu;
+		info->size = clu_size;
+
+		exfat_chain_set(&cdir, info->start_clu,
+			EXFAT_B_TO_CLU(info->size, sbi), info->flags);
+		count = exfat_count_dir_entries(sb, &cdir);
+		if (count < 0)
+			return -EIO;
+		info->num_subdirs = count + EXFAT_MIN_SUBDIR;
+	}
+	memset(&info->crtime, 0, sizeof(info->crtime));
+	memset(&info->mtime, 0, sizeof(info->mtime));
+	memset(&info->atime, 0, sizeof(info->atime));
+out:
+	return ret;
+}
+
+static int exfat_create(struct inode *dir, struct dentry *dentry, umode_t mode,
+		bool excl)
+{
+	struct super_block *sb = dir->i_sb;
+	struct inode *inode;
+	struct exfat_chain cdir;
+	struct exfat_dir_entry info;
+	loff_t i_pos;
+	int err;
+
+	mutex_lock(&EXFAT_SB(sb)->s_lock);
+	exfat_set_vol_flags(sb, VOL_DIRTY);
+	err = exfat_add_entry(dir, dentry->d_name.name, &cdir, TYPE_FILE,
+		&info);
+	exfat_set_vol_flags(sb, VOL_CLEAN);
+	if (err)
+		goto unlock;
+
+	inode_inc_iversion(dir);
+	dir->i_ctime = dir->i_mtime = current_time(dir);
+	if (IS_DIRSYNC(dir))
+		exfat_sync_inode(dir);
+	else
+		mark_inode_dirty(dir);
+
+	i_pos = exfat_make_i_pos(&info);
+	inode = exfat_build_inode(sb, &info, i_pos);
+	if (IS_ERR(inode))
+		goto unlock;
+
+	inode_inc_iversion(inode);
+	inode->i_mtime = inode->i_atime = inode->i_ctime =
+		EXFAT_I(inode)->i_crtime = current_time(inode);
+	/* timestamp is already written, so mark_inode_dirty() is unneeded. */
+
+	d_instantiate(dentry, inode);
+unlock:
+	mutex_unlock(&EXFAT_SB(sb)->s_lock);
+	return err;
+}
+
+/* lookup a file */
+static int exfat_find(struct inode *dir, struct qstr *qname,
+		struct exfat_dir_entry *info)
+{
+	int ret, dentry, num_entries, count;
+	struct exfat_chain cdir;
+	struct exfat_uni_name uni_name;
+	struct exfat_dentry *ep, *ep2;
+	struct exfat_entry_set_cache *es = NULL;
+	struct super_block *sb = dir->i_sb;
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+	struct exfat_inode_info *ei = EXFAT_I(dir);
+
+	if (qname->len == 0)
+		return -ENOENT;
+
+	/* check the validity of directory name in the given pathname */
+	ret = exfat_resolve_path_for_lookup(dir, qname->name, &cdir, &uni_name);
+	if (ret)
+		return ret;
+
+	num_entries = exfat_calc_num_entries(&uni_name);
+	if (num_entries < 0)
+		return num_entries;
+
+	/* check the validation of hint_stat and initialize it if required */
+	if (ei->version != (inode_peek_iversion_raw(dir) & 0xffffffff)) {
+		ei->hint_stat.clu = cdir.dir;
+		ei->hint_stat.eidx = 0;
+		ei->version = (inode_peek_iversion_raw(dir) & 0xffffffff);
+		ei->hint_femp.eidx = EXFAT_HINT_NONE;
+	}
+
+	/* search the file name for directories */
+	dentry = exfat_find_dir_entry(sb, ei, &cdir, &uni_name,
+			num_entries, TYPE_ALL);
+
+	if ((dentry < 0) && (dentry != -EEXIST))
+		return dentry; /* -error value */
+
+	memcpy(&info->dir, &cdir.dir, sizeof(struct exfat_chain));
+	info->entry = dentry;
+	info->num_subdirs = 0;
+
+	/* root directory itself */
+	if (unlikely(dentry == -EEXIST)) {
+		int num_clu = 0;
+
+		info->type = TYPE_DIR;
+		info->attr = ATTR_SUBDIR;
+		info->flags = ALLOC_FAT_CHAIN;
+		info->start_clu = sbi->root_dir;
+		memset(&info->crtime, 0, sizeof(info->crtime));
+		memset(&info->mtime, 0, sizeof(info->mtime));
+		memset(&info->atime, 0, sizeof(info->atime));
+
+		exfat_chain_set(&cdir, sbi->root_dir, 0, ALLOC_FAT_CHAIN);
+		if (exfat_count_num_clusters(sb, &cdir, &num_clu))
+			return -EIO;
+		info->size = num_clu << sbi->cluster_size_bits;
+
+		count = exfat_count_dir_entries(sb, &cdir);
+		if (count < 0)
+			return -EIO;
+
+		info->num_subdirs = count;
+	} else {
+		es = exfat_get_dentry_set(sb, &cdir, dentry, ES_2_ENTRIES, &ep);
+		if (!es)
+			return -EIO;
+		ep2 = ep + 1;
+
+		info->type = exfat_get_entry_type(ep);
+		info->attr = le16_to_cpu(ep->dentry.file.attr);
+		info->size = le64_to_cpu(ep2->dentry.stream.valid_size);
+		if ((info->type == TYPE_FILE) && (info->size == 0)) {
+			info->flags = ALLOC_NO_FAT_CHAIN;
+			info->start_clu = EXFAT_EOF_CLUSTER;
+		} else {
+			info->flags = ep2->dentry.stream.flags;
+			info->start_clu =
+				le32_to_cpu(ep2->dentry.stream.start_clu);
+		}
+
+		if (ei->start_clu == EXFAT_FREE_CLUSTER) {
+			exfat_fs_error(sb,
+				"non-zero size file starts with zero cluster (size : %llu, p_dir : %u, entry : 0x%08x)",
+				i_size_read(dir), ei->dir.dir, ei->entry);
+			return -EIO;
+		}
+
+		exfat_get_entry_time(sbi, &info->crtime,
+				ep->dentry.file.create_tz,
+				ep->dentry.file.create_time,
+				ep->dentry.file.create_date,
+				ep->dentry.file.create_time_ms);
+		exfat_get_entry_time(sbi, &info->mtime,
+				ep->dentry.file.modify_tz,
+				ep->dentry.file.modify_time,
+				ep->dentry.file.modify_date,
+				ep->dentry.file.modify_time_ms);
+		exfat_get_entry_time(sbi, &info->atime,
+				ep->dentry.file.access_tz,
+				ep->dentry.file.access_time,
+				ep->dentry.file.access_date,
+				0);
+		kfree(es);
+
+		if (info->type == TYPE_DIR) {
+			exfat_chain_set(&cdir, info->start_clu,
+				EXFAT_B_TO_CLU(info->size, sbi), info->flags);
+			count = exfat_count_dir_entries(sb, &cdir);
+			if (count < 0)
+				return -EIO;
+
+			info->num_subdirs = count + EXFAT_MIN_SUBDIR;
+		}
+	}
+	return 0;
+}
+
+static int exfat_d_anon_disconn(struct dentry *dentry)
+{
+	return IS_ROOT(dentry) && (dentry->d_flags & DCACHE_DISCONNECTED);
+}
+
+static struct dentry *exfat_lookup(struct inode *dir, struct dentry *dentry,
+		unsigned int flags)
+{
+	struct super_block *sb = dir->i_sb;
+	struct inode *inode;
+	struct dentry *alias;
+	struct exfat_dir_entry info;
+	int err;
+	loff_t i_pos;
+	mode_t i_mode;
+
+	mutex_lock(&EXFAT_SB(sb)->s_lock);
+	err = exfat_find(dir, &dentry->d_name, &info);
+	if (err) {
+		if (err == -ENOENT) {
+			inode = NULL;
+			goto out;
+		}
+		goto unlock;
+	}
+
+	i_pos = exfat_make_i_pos(&info);
+	inode = exfat_build_inode(sb, &info, i_pos);
+	if (IS_ERR(inode)) {
+		err = PTR_ERR(inode);
+		goto unlock;
+	}
+
+	i_mode = inode->i_mode;
+	alias = d_find_alias(inode);
+
+	/*
+	 * Checking "alias->d_parent == dentry->d_parent" to make sure
+	 * FS is not corrupted (especially double linked dir).
+	 */
+	if (alias && alias->d_parent == dentry->d_parent &&
+			!exfat_d_anon_disconn(alias)) {
+
+		/*
+		 * Unhashed alias is able to exist because of revalidate()
+		 * called by lookup_fast. You can easily make this status
+		 * by calling create and lookup concurrently
+		 * In such case, we reuse an alias instead of new dentry
+		 */
+		if (d_unhashed(alias)) {
+			WARN_ON(alias->d_name.hash_len !=
+				dentry->d_name.hash_len);
+			exfat_msg(sb, KERN_INFO,
+				"rehashed a dentry(%p) in read lookup", alias);
+			d_drop(dentry);
+			d_rehash(alias);
+		} else if (!S_ISDIR(i_mode)) {
+			/*
+			 * This inode has non anonymous-DCACHE_DISCONNECTED
+			 * dentry. This means, the user did ->lookup() by an
+			 * another name (longname vs 8.3 alias of it) in past.
+			 *
+			 * Switch to new one for reason of locality if possible.
+			 */
+			d_move(alias, dentry);
+		}
+		iput(inode);
+		mutex_unlock(&EXFAT_SB(sb)->s_lock);
+		return alias;
+	}
+	dput(alias);
+out:
+	mutex_unlock(&EXFAT_SB(sb)->s_lock);
+	if (!inode)
+		exfat_d_version_set(dentry, inode_query_iversion(dir));
+
+	return d_splice_alias(inode, dentry);
+unlock:
+	mutex_unlock(&EXFAT_SB(sb)->s_lock);
+	return ERR_PTR(err);
+}
+
+/* remove an entry, BUT don't truncate */
+static int exfat_unlink(struct inode *dir, struct dentry *dentry)
+{
+	struct exfat_chain cdir;
+	struct exfat_dentry *ep;
+	struct super_block *sb = dir->i_sb;
+	struct inode *inode = dentry->d_inode;
+	struct exfat_inode_info *ei = EXFAT_I(inode);
+	struct buffer_head *bh;
+	sector_t sector;
+	int num_entries, entry, err = 0;
+
+	mutex_lock(&EXFAT_SB(sb)->s_lock);
+	exfat_chain_dup(&cdir, &ei->dir);
+	entry = ei->entry;
+	if (ei->dir.dir == DIR_DELETED) {
+		exfat_msg(sb, KERN_ERR, "abnormal access to deleted dentry");
+		err = -ENOENT;
+		goto unlock;
+	}
+
+	ep = exfat_get_dentry(sb, &cdir, entry, &bh, &sector);
+	if (!ep) {
+		err = -EIO;
+		goto unlock;
+	}
+	num_entries = exfat_count_ext_entries(sb, &cdir, entry, ep);
+	if (num_entries < 0) {
+		err = -EIO;
+		brelse(bh);
+		goto unlock;
+	}
+	num_entries++;
+	brelse(bh);
+
+	exfat_set_vol_flags(sb, VOL_DIRTY);
+	/* update the directory entry */
+	if (exfat_remove_entries(dir, &cdir, entry, 0, num_entries)) {
+		err = -EIO;
+		goto unlock;
+	}
+
+	/* This doesn't modify ei */
+	ei->dir.dir = DIR_DELETED;
+	exfat_set_vol_flags(sb, VOL_CLEAN);
+
+	inode_inc_iversion(dir);
+	dir->i_mtime = dir->i_atime = current_time(dir);
+	if (IS_DIRSYNC(dir))
+		exfat_sync_inode(dir);
+	else
+		mark_inode_dirty(dir);
+
+	clear_nlink(inode);
+	inode->i_mtime = inode->i_atime = current_time(inode);
+	exfat_unhash_inode(inode);
+	exfat_d_version_set(dentry, inode_query_iversion(dir));
+unlock:
+	mutex_unlock(&EXFAT_SB(sb)->s_lock);
+	return err;
+}
+
+static int exfat_mkdir(struct inode *dir, struct dentry *dentry, umode_t mode)
+{
+	struct super_block *sb = dir->i_sb;
+	struct inode *inode;
+	struct exfat_dir_entry info;
+	struct exfat_chain cdir;
+	loff_t i_pos;
+	int err;
+
+	mutex_lock(&EXFAT_SB(sb)->s_lock);
+	exfat_set_vol_flags(sb, VOL_DIRTY);
+	err = exfat_add_entry(dir, dentry->d_name.name, &cdir, TYPE_DIR,
+		&info);
+	exfat_set_vol_flags(sb, VOL_CLEAN);
+	if (err)
+		goto unlock;
+
+	inode_inc_iversion(dir);
+	dir->i_ctime = dir->i_mtime = current_time(dir);
+	if (IS_DIRSYNC(dir))
+		exfat_sync_inode(dir);
+	else
+		mark_inode_dirty(dir);
+	inc_nlink(dir);
+
+	i_pos = exfat_make_i_pos(&info);
+	inode = exfat_build_inode(sb, &info, i_pos);
+	if (IS_ERR(inode)) {
+		err = PTR_ERR(inode);
+		goto unlock;
+	}
+
+	inode_inc_iversion(inode);
+	inode->i_mtime = inode->i_atime = inode->i_ctime =
+		EXFAT_I(inode)->i_crtime = current_time(inode);
+	/* timestamp is already written, so mark_inode_dirty() is unneeded. */
+
+	d_instantiate(dentry, inode);
+
+unlock:
+	mutex_unlock(&EXFAT_SB(sb)->s_lock);
+	return err;
+}
+
+static int exfat_check_dir_empty(struct super_block *sb,
+		struct exfat_chain *p_dir)
+{
+	int i, dentries_per_clu;
+	unsigned int type;
+	struct exfat_chain clu;
+	struct exfat_dentry *ep;
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+	struct buffer_head *bh;
+
+	dentries_per_clu = sbi->dentries_per_clu;
+
+	exfat_chain_dup(&clu, p_dir);
+
+	while (clu.dir != EXFAT_EOF_CLUSTER) {
+		for (i = 0; i < dentries_per_clu; i++) {
+			ep = exfat_get_dentry(sb, &clu, i, &bh, NULL);
+			if (!ep)
+				return -EIO;
+			type = exfat_get_entry_type(ep);
+			brelse(bh);
+			if (type == TYPE_UNUSED)
+				return 0;
+
+			if (type != TYPE_FILE && type != TYPE_DIR)
+				continue;
+
+			return -ENOTEMPTY;
+		}
+
+		if (clu.flags == ALLOC_NO_FAT_CHAIN) {
+			if (--clu.size > 0)
+				clu.dir++;
+			else
+				clu.dir = EXFAT_EOF_CLUSTER;
+		} else {
+			if (exfat_get_next_cluster(sb, &(clu.dir)))
+				return -EIO;
+		}
+	}
+
+	return 0;
+}
+
+static int exfat_rmdir(struct inode *dir, struct dentry *dentry)
+{
+	struct inode *inode = dentry->d_inode;
+	struct exfat_dentry *ep;
+	struct exfat_chain cdir, clu_to_free;
+	struct super_block *sb = inode->i_sb;
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+	struct exfat_inode_info *ei = EXFAT_I(inode);
+	struct buffer_head *bh;
+	sector_t sector;
+	int num_entries, entry, err;
+
+	mutex_lock(&EXFAT_SB(inode->i_sb)->s_lock);
+
+	exfat_chain_dup(&cdir, &ei->dir);
+	entry = ei->entry;
+
+	if (ei->dir.dir == DIR_DELETED) {
+		exfat_msg(sb, KERN_ERR, "abnormal access to deleted dentry");
+		err = -ENOENT;
+		goto unlock;
+	}
+
+	exfat_set_vol_flags(sb, VOL_DIRTY);
+	exfat_chain_set(&clu_to_free, ei->start_clu,
+		EXFAT_B_TO_CLU_ROUND_UP(i_size_read(inode), sbi), ei->flags);
+
+	err = exfat_check_dir_empty(sb, &clu_to_free);
+	if (err) {
+		if (err == -EIO)
+			exfat_msg(sb, KERN_ERR,
+				"failed to exfat_check_dir_empty : err(%d)",
+				err);
+		goto unlock;
+	}
+
+	ep = exfat_get_dentry(sb, &cdir, entry, &bh, &sector);
+	if (!ep) {
+		err = -EIO;
+		goto unlock;
+	}
+
+	num_entries = exfat_count_ext_entries(sb, &cdir, entry, ep);
+	if (num_entries < 0) {
+		err = -EIO;
+		brelse(bh);
+		goto unlock;
+	}
+	num_entries++;
+	brelse(bh);
+
+	err = exfat_remove_entries(dir, &cdir, entry, 0, num_entries);
+	if (err) {
+		exfat_msg(sb, KERN_ERR,
+				"failed to exfat_remove_entries : err(%d)",
+				err);
+		goto unlock;
+	}
+	ei->dir.dir = DIR_DELETED;
+	exfat_set_vol_flags(sb, VOL_CLEAN);
+
+	inode_inc_iversion(dir);
+	dir->i_mtime = dir->i_atime = current_time(dir);
+	if (IS_DIRSYNC(dir))
+		exfat_sync_inode(dir);
+	else
+		mark_inode_dirty(dir);
+	drop_nlink(dir);
+
+	clear_nlink(inode);
+	inode->i_mtime = inode->i_atime = current_time(inode);
+	exfat_unhash_inode(inode);
+	exfat_d_version_set(dentry, inode_query_iversion(dir));
+unlock:
+	mutex_unlock(&EXFAT_SB(inode->i_sb)->s_lock);
+	return err;
+}
+
+static int exfat_rename_file(struct inode *inode, struct exfat_chain *p_dir,
+		int oldentry, struct exfat_uni_name *p_uniname,
+		struct exfat_inode_info *ei)
+{
+	int ret, num_old_entries, num_new_entries;
+	sector_t sector_old, sector_new;
+	struct exfat_dentry *epold, *epnew;
+	struct super_block *sb = inode->i_sb;
+	struct buffer_head *new_bh, *old_bh;
+	int sync = IS_DIRSYNC(inode);
+
+	epold = exfat_get_dentry(sb, p_dir, oldentry, &old_bh, &sector_old);
+	if (!epold)
+		return -EIO;
+
+	num_old_entries = exfat_count_ext_entries(sb, p_dir, oldentry, epold);
+	if (num_old_entries < 0)
+		return -EIO;
+	num_old_entries++;
+
+	num_new_entries = exfat_calc_num_entries(p_uniname);
+	if (num_new_entries < 0)
+		return num_new_entries;
+
+	if (num_old_entries < num_new_entries) {
+		int newentry;
+
+		newentry =
+			exfat_find_empty_entry(inode, p_dir, num_new_entries);
+		if (newentry < 0)
+			return newentry; /* -EIO or -ENOSPC */
+
+		epnew = exfat_get_dentry(sb, p_dir, newentry, &new_bh,
+			&sector_new);
+		if (!epnew)
+			return -EIO;
+
+		memcpy(epnew, epold, DENTRY_SIZE);
+		if (exfat_get_entry_type(epnew) == TYPE_FILE) {
+			epnew->dentry.file.attr |= cpu_to_le16(ATTR_ARCHIVE);
+			ei->attr |= ATTR_ARCHIVE;
+		}
+		exfat_update_bh(sb, new_bh, sync);
+		brelse(old_bh);
+		brelse(new_bh);
+
+		epold = exfat_get_dentry(sb, p_dir, oldentry + 1, &old_bh,
+			&sector_old);
+		epnew = exfat_get_dentry(sb, p_dir, newentry + 1, &new_bh,
+			&sector_new);
+		if (!epold || !epnew)
+			return -EIO;
+
+		memcpy(epnew, epold, DENTRY_SIZE);
+		exfat_update_bh(sb, new_bh, sync);
+		brelse(old_bh);
+		brelse(new_bh);
+
+		ret = exfat_init_ext_entry(inode, p_dir, newentry,
+			num_new_entries, p_uniname);
+		if (ret)
+			return ret;
+
+		exfat_remove_entries(inode, p_dir, oldentry, 0,
+			num_old_entries);
+		ei->entry = newentry;
+	} else {
+		if (exfat_get_entry_type(epold) == TYPE_FILE) {
+			epold->dentry.file.attr |= cpu_to_le16(ATTR_ARCHIVE);
+			ei->attr |= ATTR_ARCHIVE;
+		}
+		exfat_update_bh(sb, old_bh, sync);
+		brelse(old_bh);
+		ret = exfat_init_ext_entry(inode, p_dir, oldentry,
+			num_new_entries, p_uniname);
+		if (ret)
+			return ret;
+
+		exfat_remove_entries(inode, p_dir, oldentry, num_new_entries,
+			num_old_entries);
+	}
+	return 0;
+}
+
+static int exfat_move_file(struct inode *inode, struct exfat_chain *p_olddir,
+		int oldentry, struct exfat_chain *p_newdir,
+		struct exfat_uni_name *p_uniname, struct exfat_inode_info *ei)
+{
+	int ret, newentry, num_new_entries, num_old_entries;
+	sector_t sector_mov, sector_new;
+	struct exfat_dentry *epmov, *epnew;
+	struct super_block *sb = inode->i_sb;
+	struct buffer_head *mov_bh, *new_bh;
+
+	epmov = exfat_get_dentry(sb, p_olddir, oldentry, &mov_bh, &sector_mov);
+	if (!epmov)
+		return -EIO;
+
+	/* check if the source and target directory is the same */
+	if (exfat_get_entry_type(epmov) == TYPE_DIR &&
+	    le32_to_cpu(epmov->dentry.stream.start_clu) == p_newdir->dir)
+		return -EINVAL;
+
+	num_old_entries = exfat_count_ext_entries(sb, p_olddir, oldentry,
+		epmov);
+	if (num_old_entries < 0)
+		return -EIO;
+	num_old_entries++;
+
+	num_new_entries = exfat_calc_num_entries(p_uniname);
+	if (num_new_entries < 0)
+		return num_new_entries;
+
+	newentry = exfat_find_empty_entry(inode, p_newdir, num_new_entries);
+	if (newentry < 0)
+		return newentry; /* -EIO or -ENOSPC */
+
+	epnew = exfat_get_dentry(sb, p_newdir, newentry, &new_bh, &sector_new);
+	if (!epnew)
+		return -EIO;
+
+	memcpy(epnew, epmov, DENTRY_SIZE);
+	if (exfat_get_entry_type(epnew) == TYPE_FILE) {
+		epnew->dentry.file.attr |= cpu_to_le16(ATTR_ARCHIVE);
+		ei->attr |= ATTR_ARCHIVE;
+	}
+	exfat_update_bh(sb, new_bh, IS_DIRSYNC(inode));
+	brelse(mov_bh);
+	brelse(new_bh);
+
+	epmov = exfat_get_dentry(sb, p_olddir, oldentry + 1, &mov_bh,
+		&sector_mov);
+	epnew = exfat_get_dentry(sb, p_newdir, newentry + 1, &new_bh,
+		&sector_new);
+	if (!epmov || !epnew)
+		return -EIO;
+
+	memcpy(epnew, epmov, DENTRY_SIZE);
+	exfat_update_bh(sb, new_bh, IS_DIRSYNC(inode));
+	brelse(mov_bh);
+	brelse(new_bh);
+
+	ret = exfat_init_ext_entry(inode, p_newdir, newentry, num_new_entries,
+		p_uniname);
+	if (ret)
+		return ret;
+
+	exfat_remove_entries(inode, p_olddir, oldentry, 0, num_old_entries);
+
+	exfat_chain_set(&ei->dir, p_newdir->dir, p_newdir->size,
+		p_newdir->flags);
+
+	ei->entry = newentry;
+	return 0;
+}
+
+static void exfat_update_parent_info(struct exfat_inode_info *ei,
+		struct inode *parent_inode)
+{
+	struct exfat_sb_info *sbi = EXFAT_SB(parent_inode->i_sb);
+	struct exfat_inode_info *parent_ei = EXFAT_I(parent_inode);
+	loff_t parent_isize = i_size_read(parent_inode);
+
+	/*
+	 * the problem that struct exfat_inode_info caches wrong parent info.
+	 *
+	 * because of flag-mismatch of ei->dir,
+	 * there is abnormal traversing cluster chain.
+	 */
+	if (unlikely(parent_ei->flags != ei->dir.flags ||
+		     parent_isize != EXFAT_CLU_TO_B(ei->dir.size, sbi) ||
+		     parent_ei->start_clu != ei->dir.dir)) {
+		exfat_chain_set(&ei->dir, parent_ei->start_clu,
+			EXFAT_B_TO_CLU_ROUND_UP(parent_isize, sbi),
+			parent_ei->flags);
+	}
+}
+
+/* rename or move a old file into a new file */
+static int __exfat_rename(struct inode *old_parent_inode,
+		struct exfat_inode_info *ei, struct inode *new_parent_inode,
+		struct dentry *new_dentry)
+{
+	int ret;
+	int dentry;
+	struct exfat_chain olddir, newdir;
+	struct exfat_chain *p_dir = NULL;
+	struct exfat_uni_name uni_name;
+	struct exfat_dentry *ep;
+	struct super_block *sb = old_parent_inode->i_sb;
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+	const unsigned char *new_path = new_dentry->d_name.name;
+	struct inode *new_inode = new_dentry->d_inode;
+	int num_entries;
+	struct exfat_inode_info *new_ei = NULL;
+	unsigned int new_entry_type = TYPE_UNUSED;
+	int new_entry = 0;
+	struct buffer_head *old_bh, *new_bh = NULL;
+
+	/* check the validity of pointer parameters */
+	if (new_path == NULL || strlen(new_path) == 0)
+		return -EINVAL;
+
+	if (ei->dir.dir == DIR_DELETED) {
+		exfat_msg(sb, KERN_ERR,
+				"abnormal access to deleted source dentry");
+		return -ENOENT;
+	}
+
+	exfat_update_parent_info(ei, old_parent_inode);
+
+	exfat_chain_dup(&olddir, &ei->dir);
+	dentry = ei->entry;
+
+	ep = exfat_get_dentry(sb, &olddir, dentry, &old_bh, NULL);
+	if (!ep) {
+		ret = -EIO;
+		goto out;
+	}
+	brelse(old_bh);
+
+	/* check whether new dir is existing directory and empty */
+	if (new_inode) {
+		ret = -EIO;
+		new_ei = EXFAT_I(new_inode);
+
+		if (new_ei->dir.dir == DIR_DELETED) {
+			exfat_msg(sb, KERN_ERR,
+				"abnormal access to deleted target dentry");
+			goto out;
+		}
+
+		exfat_update_parent_info(new_ei, new_parent_inode);
+
+		p_dir = &(new_ei->dir);
+		new_entry = new_ei->entry;
+		ep = exfat_get_dentry(sb, p_dir, new_entry, &new_bh, NULL);
+		if (!ep)
+			goto out;
+
+		new_entry_type = exfat_get_entry_type(ep);
+		brelse(new_bh);
+
+		/* if new_inode exists, update ei */
+		if (new_entry_type == TYPE_DIR) {
+			struct exfat_chain new_clu;
+
+			new_clu.dir = new_ei->start_clu;
+			new_clu.size =
+				EXFAT_B_TO_CLU_ROUND_UP(i_size_read(new_inode),
+				sbi);
+			new_clu.flags = new_ei->flags;
+
+			ret = exfat_check_dir_empty(sb, &new_clu);
+			if (ret)
+				goto out;
+		}
+	}
+
+	/* check the validity of directory name in the given new pathname */
+	ret = exfat_resolve_path(new_parent_inode, new_path, &newdir,
+			&uni_name);
+	if (ret)
+		goto out;
+
+	exfat_set_vol_flags(sb, VOL_DIRTY);
+
+	if (olddir.dir == newdir.dir)
+		ret = exfat_rename_file(new_parent_inode, &olddir, dentry,
+				&uni_name, ei);
+	else
+		ret = exfat_move_file(new_parent_inode, &olddir, dentry,
+				&newdir, &uni_name, ei);
+
+	if (!ret && new_inode) {
+		/* delete entries of new_dir */
+		ep = exfat_get_dentry(sb, p_dir, new_entry, &new_bh, NULL);
+		if (!ep) {
+			ret = -EIO;
+			goto del_out;
+		}
+
+		num_entries = exfat_count_ext_entries(sb, p_dir, new_entry, ep);
+		if (num_entries < 0) {
+			ret = -EIO;
+			goto del_out;
+		}
+		brelse(new_bh);
+
+		if (exfat_remove_entries(new_inode, p_dir, new_entry, 0,
+				num_entries + 1)) {
+			ret = -EIO;
+			goto del_out;
+		}
+
+		/* Free the clusters if new_inode is a dir(as if exfat_rmdir) */
+		if (new_entry_type == TYPE_DIR) {
+			/* new_ei, new_clu_to_free */
+			struct exfat_chain new_clu_to_free;
+
+			exfat_chain_set(&new_clu_to_free, new_ei->start_clu,
+				EXFAT_B_TO_CLU_ROUND_UP(i_size_read(new_inode),
+				sbi), new_ei->flags);
+
+			if (exfat_free_cluster(new_inode, &new_clu_to_free)) {
+				/* just set I/O error only */
+				ret = -EIO;
+			}
+
+			i_size_write(new_inode, 0);
+			new_ei->start_clu = EXFAT_EOF_CLUSTER;
+			new_ei->flags = ALLOC_NO_FAT_CHAIN;
+		}
+del_out:
+		/* Update new_inode ei
+		 * Prevent syncing removed new_inode
+		 * (new_ei is already initialized above code ("if (new_inode)")
+		 */
+		new_ei->dir.dir = DIR_DELETED;
+	}
+	exfat_set_vol_flags(sb, VOL_CLEAN);
+out:
+	return ret;
+}
+
+static int exfat_rename(struct inode *old_dir, struct dentry *old_dentry,
+		struct inode *new_dir, struct dentry *new_dentry,
+		unsigned int flags)
+{
+	struct inode *old_inode, *new_inode;
+	struct super_block *sb = old_dir->i_sb;
+	loff_t i_pos;
+	int err;
+
+	/*
+	 * The VFS already checks for existence, so for local filesystems
+	 * the RENAME_NOREPLACE implementation is equivalent to plain rename.
+	 * Don't support any other flags
+	 */
+	if (flags & ~RENAME_NOREPLACE)
+		return -EINVAL;
+
+	mutex_lock(&EXFAT_SB(sb)->s_lock);
+	old_inode = old_dentry->d_inode;
+	new_inode = new_dentry->d_inode;
+
+	err = __exfat_rename(old_dir, EXFAT_I(old_inode), new_dir, new_dentry);
+	if (err)
+		goto unlock;
+
+	inode_inc_iversion(new_dir);
+	new_dir->i_ctime = new_dir->i_mtime = new_dir->i_atime =
+		EXFAT_I(new_dir)->i_crtime = current_time(new_dir);
+	if (IS_DIRSYNC(new_dir))
+		exfat_sync_inode(new_dir);
+	else
+		mark_inode_dirty(new_dir);
+
+	i_pos = ((loff_t)EXFAT_I(old_inode)->dir.dir << 32) |
+		(EXFAT_I(old_inode)->entry & 0xffffffff);
+	exfat_unhash_inode(old_inode);
+	exfat_hash_inode(old_inode, i_pos);
+	if (IS_DIRSYNC(new_dir))
+		exfat_sync_inode(old_inode);
+	else
+		mark_inode_dirty(old_inode);
+
+	if (S_ISDIR(old_inode->i_mode) && old_dir != new_dir) {
+		drop_nlink(old_dir);
+		if (!new_inode)
+			inc_nlink(new_dir);
+	}
+
+	inode_inc_iversion(old_dir);
+	old_dir->i_ctime = old_dir->i_mtime = current_time(old_dir);
+	if (IS_DIRSYNC(old_dir))
+		exfat_sync_inode(old_dir);
+	else
+		mark_inode_dirty(old_dir);
+
+	if (new_inode) {
+		exfat_unhash_inode(new_inode);
+
+		/* skip drop_nlink if new_inode already has been dropped */
+		if (new_inode->i_nlink) {
+			drop_nlink(new_inode);
+			if (S_ISDIR(new_inode->i_mode))
+				drop_nlink(new_inode);
+		} else {
+			exfat_msg(sb, KERN_WARNING,
+					"abnormal access to an inode dropped");
+			WARN_ON(new_inode->i_nlink == 0);
+		}
+		new_inode->i_ctime = EXFAT_I(new_inode)->i_crtime =
+			current_time(new_inode);
+	}
+
+unlock:
+	mutex_unlock(&EXFAT_SB(sb)->s_lock);
+	return err;
+}
+
+const struct inode_operations exfat_dir_inode_operations = {
+	.create		= exfat_create,
+	.lookup		= exfat_lookup,
+	.unlink		= exfat_unlink,
+	.mkdir		= exfat_mkdir,
+	.rmdir		= exfat_rmdir,
+	.rename		= exfat_rename,
+	.setattr	= exfat_setattr,
+	.getattr	= exfat_getattr,
+};
diff --git a/fs/exfat/nls.c b/fs/exfat/nls.c
new file mode 100644
index 0000000..6d1c3ae
--- /dev/null
+++ b/fs/exfat/nls.c
@@ -0,0 +1,831 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2012-2013 Samsung Electronics Co., Ltd.
+ */
+
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/buffer_head.h>
+#include <asm/unaligned.h>
+
+#include "exfat_raw.h"
+#include "exfat_fs.h"
+
+/* Upcase tabel macro */
+#define EXFAT_NUM_UPCASE	(2918)
+#define UTBL_COUNT		(0x10000)
+
+/*
+ * Upcase table in compressed format (7.2.5.1 Recommended Up-case Table
+ * in exfat specification, See:
+ * https://docs.microsoft.com/en-us/windows/win32/fileio/exfat-specification).
+ */
+static const unsigned short uni_def_upcase[EXFAT_NUM_UPCASE] = {
+	0x0000, 0x0001, 0x0002, 0x0003, 0x0004, 0x0005, 0x0006, 0x0007,
+	0x0008, 0x0009, 0x000a, 0x000b, 0x000c, 0x000d, 0x000e, 0x000f,
+	0x0010, 0x0011, 0x0012, 0x0013, 0x0014, 0x0015, 0x0016, 0x0017,
+	0x0018, 0x0019, 0x001a, 0x001b, 0x001c, 0x001d, 0x001e, 0x001f,
+	0x0020, 0x0021, 0x0022, 0x0023, 0x0024, 0x0025, 0x0026, 0x0027,
+	0x0028, 0x0029, 0x002a, 0x002b, 0x002c, 0x002d, 0x002e, 0x002f,
+	0x0030, 0x0031, 0x0032, 0x0033, 0x0034, 0x0035, 0x0036, 0x0037,
+	0x0038, 0x0039, 0x003a, 0x003b, 0x003c, 0x003d, 0x003e, 0x003f,
+	0x0040, 0x0041, 0x0042, 0x0043, 0x0044, 0x0045, 0x0046, 0x0047,
+	0x0048, 0x0049, 0x004a, 0x004b, 0x004c, 0x004d, 0x004e, 0x004f,
+	0x0050, 0x0051, 0x0052, 0x0053, 0x0054, 0x0055, 0x0056, 0x0057,
+	0x0058, 0x0059, 0x005a, 0x005b, 0x005c, 0x005d, 0x005e, 0x005f,
+	0x0060, 0x0041, 0x0042, 0x0043, 0x0044, 0x0045, 0x0046, 0x0047,
+	0x0048, 0x0049, 0x004a, 0x004b, 0x004c, 0x004d, 0x004e, 0x004f,
+	0x0050, 0x0051, 0x0052, 0x0053, 0x0054, 0x0055, 0x0056, 0x0057,
+	0x0058, 0x0059, 0x005a, 0x007b, 0x007c, 0x007d, 0x007e, 0x007f,
+	0x0080, 0x0081, 0x0082, 0x0083, 0x0084, 0x0085, 0x0086, 0x0087,
+	0x0088, 0x0089, 0x008a, 0x008b, 0x008c, 0x008d, 0x008e, 0x008f,
+	0x0090, 0x0091, 0x0092, 0x0093, 0x0094, 0x0095, 0x0096, 0x0097,
+	0x0098, 0x0099, 0x009a, 0x009b, 0x009c, 0x009d, 0x009e, 0x009f,
+	0x00a0, 0x00a1, 0x00a2, 0x00a3, 0x00a4, 0x00a5, 0x00a6, 0x00a7,
+	0x00a8, 0x00a9, 0x00aa, 0x00ab, 0x00ac, 0x00ad, 0x00ae, 0x00af,
+	0x00b0, 0x00b1, 0x00b2, 0x00b3, 0x00b4, 0x00b5, 0x00b6, 0x00b7,
+	0x00b8, 0x00b9, 0x00ba, 0x00bb, 0x00bc, 0x00bd, 0x00be, 0x00bf,
+	0x00c0, 0x00c1, 0x00c2, 0x00c3, 0x00c4, 0x00c5, 0x00c6, 0x00c7,
+	0x00c8, 0x00c9, 0x00ca, 0x00cb, 0x00cc, 0x00cd, 0x00ce, 0x00cf,
+	0x00d0, 0x00d1, 0x00d2, 0x00d3, 0x00d4, 0x00d5, 0x00d6, 0x00d7,
+	0x00d8, 0x00d9, 0x00da, 0x00db, 0x00dc, 0x00dd, 0x00de, 0x00df,
+	0x00c0, 0x00c1, 0x00c2, 0x00c3, 0x00c4, 0x00c5, 0x00c6, 0x00c7,
+	0x00c8, 0x00c9, 0x00ca, 0x00cb, 0x00cc, 0x00cd, 0x00ce, 0x00cf,
+	0x00d0, 0x00d1, 0x00d2, 0x00d3, 0x00d4, 0x00d5, 0x00d6, 0x00f7,
+	0x00d8, 0x00d9, 0x00da, 0x00db, 0x00dc, 0x00dd, 0x00de, 0x0178,
+	0x0100, 0x0100, 0x0102, 0x0102, 0x0104, 0x0104, 0x0106, 0x0106,
+	0x0108, 0x0108, 0x010a, 0x010a, 0x010c, 0x010c, 0x010e, 0x010e,
+	0x0110, 0x0110, 0x0112, 0x0112, 0x0114, 0x0114, 0x0116, 0x0116,
+	0x0118, 0x0118, 0x011a, 0x011a, 0x011c, 0x011c, 0x011e, 0x011e,
+	0x0120, 0x0120, 0x0122, 0x0122, 0x0124, 0x0124, 0x0126, 0x0126,
+	0x0128, 0x0128, 0x012a, 0x012a, 0x012c, 0x012c, 0x012e, 0x012e,
+	0x0130, 0x0131, 0x0132, 0x0132, 0x0134, 0x0134, 0x0136, 0x0136,
+	0x0138, 0x0139, 0x0139, 0x013b, 0x013b, 0x013d, 0x013d, 0x013f,
+	0x013f, 0x0141, 0x0141, 0x0143, 0x0143, 0x0145, 0x0145, 0x0147,
+	0x0147, 0x0149, 0x014a, 0x014a, 0x014c, 0x014c, 0x014e, 0x014e,
+	0x0150, 0x0150, 0x0152, 0x0152, 0x0154, 0x0154, 0x0156, 0x0156,
+	0x0158, 0x0158, 0x015a, 0x015a, 0x015c, 0x015c, 0x015e, 0x015e,
+	0x0160, 0x0160, 0x0162, 0x0162, 0x0164, 0x0164, 0x0166, 0x0166,
+	0x0168, 0x0168, 0x016a, 0x016a, 0x016c, 0x016c, 0x016e, 0x016e,
+	0x0170, 0x0170, 0x0172, 0x0172, 0x0174, 0x0174, 0x0176, 0x0176,
+	0x0178, 0x0179, 0x0179, 0x017b, 0x017b, 0x017d, 0x017d, 0x017f,
+	0x0243, 0x0181, 0x0182, 0x0182, 0x0184, 0x0184, 0x0186, 0x0187,
+	0x0187, 0x0189, 0x018a, 0x018b, 0x018b, 0x018d, 0x018e, 0x018f,
+	0x0190, 0x0191, 0x0191, 0x0193, 0x0194, 0x01f6, 0x0196, 0x0197,
+	0x0198, 0x0198, 0x023d, 0x019b, 0x019c, 0x019d, 0x0220, 0x019f,
+	0x01a0, 0x01a0, 0x01a2, 0x01a2, 0x01a4, 0x01a4, 0x01a6, 0x01a7,
+	0x01a7, 0x01a9, 0x01aa, 0x01ab, 0x01ac, 0x01ac, 0x01ae, 0x01af,
+	0x01af, 0x01b1, 0x01b2, 0x01b3, 0x01b3, 0x01b5, 0x01b5, 0x01b7,
+	0x01b8, 0x01b8, 0x01ba, 0x01bb, 0x01bc, 0x01bc, 0x01be, 0x01f7,
+	0x01c0, 0x01c1, 0x01c2, 0x01c3, 0x01c4, 0x01c5, 0x01c4, 0x01c7,
+	0x01c8, 0x01c7, 0x01ca, 0x01cb, 0x01ca, 0x01cd, 0x01cd, 0x01cf,
+	0x01cf, 0x01d1, 0x01d1, 0x01d3, 0x01d3, 0x01d5, 0x01d5, 0x01d7,
+	0x01d7, 0x01d9, 0x01d9, 0x01db, 0x01db, 0x018e, 0x01de, 0x01de,
+	0x01e0, 0x01e0, 0x01e2, 0x01e2, 0x01e4, 0x01e4, 0x01e6, 0x01e6,
+	0x01e8, 0x01e8, 0x01ea, 0x01ea, 0x01ec, 0x01ec, 0x01ee, 0x01ee,
+	0x01f0, 0x01f1, 0x01f2, 0x01f1, 0x01f4, 0x01f4, 0x01f6, 0x01f7,
+	0x01f8, 0x01f8, 0x01fa, 0x01fa, 0x01fc, 0x01fc, 0x01fe, 0x01fe,
+	0x0200, 0x0200, 0x0202, 0x0202, 0x0204, 0x0204, 0x0206, 0x0206,
+	0x0208, 0x0208, 0x020a, 0x020a, 0x020c, 0x020c, 0x020e, 0x020e,
+	0x0210, 0x0210, 0x0212, 0x0212, 0x0214, 0x0214, 0x0216, 0x0216,
+	0x0218, 0x0218, 0x021a, 0x021a, 0x021c, 0x021c, 0x021e, 0x021e,
+	0x0220, 0x0221, 0x0222, 0x0222, 0x0224, 0x0224, 0x0226, 0x0226,
+	0x0228, 0x0228, 0x022a, 0x022a, 0x022c, 0x022c, 0x022e, 0x022e,
+	0x0230, 0x0230, 0x0232, 0x0232, 0x0234, 0x0235, 0x0236, 0x0237,
+	0x0238, 0x0239, 0x2c65, 0x023b, 0x023b, 0x023d, 0x2c66, 0x023f,
+	0x0240, 0x0241, 0x0241, 0x0243, 0x0244, 0x0245, 0x0246, 0x0246,
+	0x0248, 0x0248, 0x024a, 0x024a, 0x024c, 0x024c, 0x024e, 0x024e,
+	0x0250, 0x0251, 0x0252, 0x0181, 0x0186, 0x0255, 0x0189, 0x018a,
+	0x0258, 0x018f, 0x025a, 0x0190, 0x025c, 0x025d, 0x025e, 0x025f,
+	0x0193, 0x0261, 0x0262, 0x0194, 0x0264, 0x0265, 0x0266, 0x0267,
+	0x0197, 0x0196, 0x026a, 0x2c62, 0x026c, 0x026d, 0x026e, 0x019c,
+	0x0270, 0x0271, 0x019d, 0x0273, 0x0274, 0x019f, 0x0276, 0x0277,
+	0x0278, 0x0279, 0x027a, 0x027b, 0x027c, 0x2c64, 0x027e, 0x027f,
+	0x01a6, 0x0281, 0x0282, 0x01a9, 0x0284, 0x0285, 0x0286, 0x0287,
+	0x01ae, 0x0244, 0x01b1, 0x01b2, 0x0245, 0x028d, 0x028e, 0x028f,
+	0x0290, 0x0291, 0x01b7, 0x0293, 0x0294, 0x0295, 0x0296, 0x0297,
+	0x0298, 0x0299, 0x029a, 0x029b, 0x029c, 0x029d, 0x029e, 0x029f,
+	0x02a0, 0x02a1, 0x02a2, 0x02a3, 0x02a4, 0x02a5, 0x02a6, 0x02a7,
+	0x02a8, 0x02a9, 0x02aa, 0x02ab, 0x02ac, 0x02ad, 0x02ae, 0x02af,
+	0x02b0, 0x02b1, 0x02b2, 0x02b3, 0x02b4, 0x02b5, 0x02b6, 0x02b7,
+	0x02b8, 0x02b9, 0x02ba, 0x02bb, 0x02bc, 0x02bd, 0x02be, 0x02bf,
+	0x02c0, 0x02c1, 0x02c2, 0x02c3, 0x02c4, 0x02c5, 0x02c6, 0x02c7,
+	0x02c8, 0x02c9, 0x02ca, 0x02cb, 0x02cc, 0x02cd, 0x02ce, 0x02cf,
+	0x02d0, 0x02d1, 0x02d2, 0x02d3, 0x02d4, 0x02d5, 0x02d6, 0x02d7,
+	0x02d8, 0x02d9, 0x02da, 0x02db, 0x02dc, 0x02dd, 0x02de, 0x02df,
+	0x02e0, 0x02e1, 0x02e2, 0x02e3, 0x02e4, 0x02e5, 0x02e6, 0x02e7,
+	0x02e8, 0x02e9, 0x02ea, 0x02eb, 0x02ec, 0x02ed, 0x02ee, 0x02ef,
+	0x02f0, 0x02f1, 0x02f2, 0x02f3, 0x02f4, 0x02f5, 0x02f6, 0x02f7,
+	0x02f8, 0x02f9, 0x02fa, 0x02fb, 0x02fc, 0x02fd, 0x02fe, 0x02ff,
+	0x0300, 0x0301, 0x0302, 0x0303, 0x0304, 0x0305, 0x0306, 0x0307,
+	0x0308, 0x0309, 0x030a, 0x030b, 0x030c, 0x030d, 0x030e, 0x030f,
+	0x0310, 0x0311, 0x0312, 0x0313, 0x0314, 0x0315, 0x0316, 0x0317,
+	0x0318, 0x0319, 0x031a, 0x031b, 0x031c, 0x031d, 0x031e, 0x031f,
+	0x0320, 0x0321, 0x0322, 0x0323, 0x0324, 0x0325, 0x0326, 0x0327,
+	0x0328, 0x0329, 0x032a, 0x032b, 0x032c, 0x032d, 0x032e, 0x032f,
+	0x0330, 0x0331, 0x0332, 0x0333, 0x0334, 0x0335, 0x0336, 0x0337,
+	0x0338, 0x0339, 0x033a, 0x033b, 0x033c, 0x033d, 0x033e, 0x033f,
+	0x0340, 0x0341, 0x0342, 0x0343, 0x0344, 0x0345, 0x0346, 0x0347,
+	0x0348, 0x0349, 0x034a, 0x034b, 0x034c, 0x034d, 0x034e, 0x034f,
+	0x0350, 0x0351, 0x0352, 0x0353, 0x0354, 0x0355, 0x0356, 0x0357,
+	0x0358, 0x0359, 0x035a, 0x035b, 0x035c, 0x035d, 0x035e, 0x035f,
+	0x0360, 0x0361, 0x0362, 0x0363, 0x0364, 0x0365, 0x0366, 0x0367,
+	0x0368, 0x0369, 0x036a, 0x036b, 0x036c, 0x036d, 0x036e, 0x036f,
+	0x0370, 0x0371, 0x0372, 0x0373, 0x0374, 0x0375, 0x0376, 0x0377,
+	0x0378, 0x0379, 0x037a, 0x03fd, 0x03fe, 0x03ff, 0x037e, 0x037f,
+	0x0380, 0x0381, 0x0382, 0x0383, 0x0384, 0x0385, 0x0386, 0x0387,
+	0x0388, 0x0389, 0x038a, 0x038b, 0x038c, 0x038d, 0x038e, 0x038f,
+	0x0390, 0x0391, 0x0392, 0x0393, 0x0394, 0x0395, 0x0396, 0x0397,
+	0x0398, 0x0399, 0x039a, 0x039b, 0x039c, 0x039d, 0x039e, 0x039f,
+	0x03a0, 0x03a1, 0x03a2, 0x03a3, 0x03a4, 0x03a5, 0x03a6, 0x03a7,
+	0x03a8, 0x03a9, 0x03aa, 0x03ab, 0x0386, 0x0388, 0x0389, 0x038a,
+	0x03b0, 0x0391, 0x0392, 0x0393, 0x0394, 0x0395, 0x0396, 0x0397,
+	0x0398, 0x0399, 0x039a, 0x039b, 0x039c, 0x039d, 0x039e, 0x039f,
+	0x03a0, 0x03a1, 0x03a3, 0x03a3, 0x03a4, 0x03a5, 0x03a6, 0x03a7,
+	0x03a8, 0x03a9, 0x03aa, 0x03ab, 0x038c, 0x038e, 0x038f, 0x03cf,
+	0x03d0, 0x03d1, 0x03d2, 0x03d3, 0x03d4, 0x03d5, 0x03d6, 0x03d7,
+	0x03d8, 0x03d8, 0x03da, 0x03da, 0x03dc, 0x03dc, 0x03de, 0x03de,
+	0x03e0, 0x03e0, 0x03e2, 0x03e2, 0x03e4, 0x03e4, 0x03e6, 0x03e6,
+	0x03e8, 0x03e8, 0x03ea, 0x03ea, 0x03ec, 0x03ec, 0x03ee, 0x03ee,
+	0x03f0, 0x03f1, 0x03f9, 0x03f3, 0x03f4, 0x03f5, 0x03f6, 0x03f7,
+	0x03f7, 0x03f9, 0x03fa, 0x03fa, 0x03fc, 0x03fd, 0x03fe, 0x03ff,
+	0x0400, 0x0401, 0x0402, 0x0403, 0x0404, 0x0405, 0x0406, 0x0407,
+	0x0408, 0x0409, 0x040a, 0x040b, 0x040c, 0x040d, 0x040e, 0x040f,
+	0x0410, 0x0411, 0x0412, 0x0413, 0x0414, 0x0415, 0x0416, 0x0417,
+	0x0418, 0x0419, 0x041a, 0x041b, 0x041c, 0x041d, 0x041e, 0x041f,
+	0x0420, 0x0421, 0x0422, 0x0423, 0x0424, 0x0425, 0x0426, 0x0427,
+	0x0428, 0x0429, 0x042a, 0x042b, 0x042c, 0x042d, 0x042e, 0x042f,
+	0x0410, 0x0411, 0x0412, 0x0413, 0x0414, 0x0415, 0x0416, 0x0417,
+	0x0418, 0x0419, 0x041a, 0x041b, 0x041c, 0x041d, 0x041e, 0x041f,
+	0x0420, 0x0421, 0x0422, 0x0423, 0x0424, 0x0425, 0x0426, 0x0427,
+	0x0428, 0x0429, 0x042a, 0x042b, 0x042c, 0x042d, 0x042e, 0x042f,
+	0x0400, 0x0401, 0x0402, 0x0403, 0x0404, 0x0405, 0x0406, 0x0407,
+	0x0408, 0x0409, 0x040a, 0x040b, 0x040c, 0x040d, 0x040e, 0x040f,
+	0x0460, 0x0460, 0x0462, 0x0462, 0x0464, 0x0464, 0x0466, 0x0466,
+	0x0468, 0x0468, 0x046a, 0x046a, 0x046c, 0x046c, 0x046e, 0x046e,
+	0x0470, 0x0470, 0x0472, 0x0472, 0x0474, 0x0474, 0x0476, 0x0476,
+	0x0478, 0x0478, 0x047a, 0x047a, 0x047c, 0x047c, 0x047e, 0x047e,
+	0x0480, 0x0480, 0x0482, 0x0483, 0x0484, 0x0485, 0x0486, 0x0487,
+	0x0488, 0x0489, 0x048a, 0x048a, 0x048c, 0x048c, 0x048e, 0x048e,
+	0x0490, 0x0490, 0x0492, 0x0492, 0x0494, 0x0494, 0x0496, 0x0496,
+	0x0498, 0x0498, 0x049a, 0x049a, 0x049c, 0x049c, 0x049e, 0x049e,
+	0x04a0, 0x04a0, 0x04a2, 0x04a2, 0x04a4, 0x04a4, 0x04a6, 0x04a6,
+	0x04a8, 0x04a8, 0x04aa, 0x04aa, 0x04ac, 0x04ac, 0x04ae, 0x04ae,
+	0x04b0, 0x04b0, 0x04b2, 0x04b2, 0x04b4, 0x04b4, 0x04b6, 0x04b6,
+	0x04b8, 0x04b8, 0x04ba, 0x04ba, 0x04bc, 0x04bc, 0x04be, 0x04be,
+	0x04c0, 0x04c1, 0x04c1, 0x04c3, 0x04c3, 0x04c5, 0x04c5, 0x04c7,
+	0x04c7, 0x04c9, 0x04c9, 0x04cb, 0x04cb, 0x04cd, 0x04cd, 0x04c0,
+	0x04d0, 0x04d0, 0x04d2, 0x04d2, 0x04d4, 0x04d4, 0x04d6, 0x04d6,
+	0x04d8, 0x04d8, 0x04da, 0x04da, 0x04dc, 0x04dc, 0x04de, 0x04de,
+	0x04e0, 0x04e0, 0x04e2, 0x04e2, 0x04e4, 0x04e4, 0x04e6, 0x04e6,
+	0x04e8, 0x04e8, 0x04ea, 0x04ea, 0x04ec, 0x04ec, 0x04ee, 0x04ee,
+	0x04f0, 0x04f0, 0x04f2, 0x04f2, 0x04f4, 0x04f4, 0x04f6, 0x04f6,
+	0x04f8, 0x04f8, 0x04fa, 0x04fa, 0x04fc, 0x04fc, 0x04fe, 0x04fe,
+	0x0500, 0x0500, 0x0502, 0x0502, 0x0504, 0x0504, 0x0506, 0x0506,
+	0x0508, 0x0508, 0x050a, 0x050a, 0x050c, 0x050c, 0x050e, 0x050e,
+	0x0510, 0x0510, 0x0512, 0x0512, 0x0514, 0x0515, 0x0516, 0x0517,
+	0x0518, 0x0519, 0x051a, 0x051b, 0x051c, 0x051d, 0x051e, 0x051f,
+	0x0520, 0x0521, 0x0522, 0x0523, 0x0524, 0x0525, 0x0526, 0x0527,
+	0x0528, 0x0529, 0x052a, 0x052b, 0x052c, 0x052d, 0x052e, 0x052f,
+	0x0530, 0x0531, 0x0532, 0x0533, 0x0534, 0x0535, 0x0536, 0x0537,
+	0x0538, 0x0539, 0x053a, 0x053b, 0x053c, 0x053d, 0x053e, 0x053f,
+	0x0540, 0x0541, 0x0542, 0x0543, 0x0544, 0x0545, 0x0546, 0x0547,
+	0x0548, 0x0549, 0x054a, 0x054b, 0x054c, 0x054d, 0x054e, 0x054f,
+	0x0550, 0x0551, 0x0552, 0x0553, 0x0554, 0x0555, 0x0556, 0x0557,
+	0x0558, 0x0559, 0x055a, 0x055b, 0x055c, 0x055d, 0x055e, 0x055f,
+	0x0560, 0x0531, 0x0532, 0x0533, 0x0534, 0x0535, 0x0536, 0x0537,
+	0x0538, 0x0539, 0x053a, 0x053b, 0x053c, 0x053d, 0x053e, 0x053f,
+	0x0540, 0x0541, 0x0542, 0x0543, 0x0544, 0x0545, 0x0546, 0x0547,
+	0x0548, 0x0549, 0x054a, 0x054b, 0x054c, 0x054d, 0x054e, 0x054f,
+	0x0550, 0x0551, 0x0552, 0x0553, 0x0554, 0x0555, 0x0556, 0xffff,
+	0x17f6, 0x2c63, 0x1d7e, 0x1d7f, 0x1d80, 0x1d81, 0x1d82, 0x1d83,
+	0x1d84, 0x1d85, 0x1d86, 0x1d87, 0x1d88, 0x1d89, 0x1d8a, 0x1d8b,
+	0x1d8c, 0x1d8d, 0x1d8e, 0x1d8f, 0x1d90, 0x1d91, 0x1d92, 0x1d93,
+	0x1d94, 0x1d95, 0x1d96, 0x1d97, 0x1d98, 0x1d99, 0x1d9a, 0x1d9b,
+	0x1d9c, 0x1d9d, 0x1d9e, 0x1d9f, 0x1da0, 0x1da1, 0x1da2, 0x1da3,
+	0x1da4, 0x1da5, 0x1da6, 0x1da7, 0x1da8, 0x1da9, 0x1daa, 0x1dab,
+	0x1dac, 0x1dad, 0x1dae, 0x1daf, 0x1db0, 0x1db1, 0x1db2, 0x1db3,
+	0x1db4, 0x1db5, 0x1db6, 0x1db7, 0x1db8, 0x1db9, 0x1dba, 0x1dbb,
+	0x1dbc, 0x1dbd, 0x1dbe, 0x1dbf, 0x1dc0, 0x1dc1, 0x1dc2, 0x1dc3,
+	0x1dc4, 0x1dc5, 0x1dc6, 0x1dc7, 0x1dc8, 0x1dc9, 0x1dca, 0x1dcb,
+	0x1dcc, 0x1dcd, 0x1dce, 0x1dcf, 0x1dd0, 0x1dd1, 0x1dd2, 0x1dd3,
+	0x1dd4, 0x1dd5, 0x1dd6, 0x1dd7, 0x1dd8, 0x1dd9, 0x1dda, 0x1ddb,
+	0x1ddc, 0x1ddd, 0x1dde, 0x1ddf, 0x1de0, 0x1de1, 0x1de2, 0x1de3,
+	0x1de4, 0x1de5, 0x1de6, 0x1de7, 0x1de8, 0x1de9, 0x1dea, 0x1deb,
+	0x1dec, 0x1ded, 0x1dee, 0x1def, 0x1df0, 0x1df1, 0x1df2, 0x1df3,
+	0x1df4, 0x1df5, 0x1df6, 0x1df7, 0x1df8, 0x1df9, 0x1dfa, 0x1dfb,
+	0x1dfc, 0x1dfd, 0x1dfe, 0x1dff, 0x1e00, 0x1e00, 0x1e02, 0x1e02,
+	0x1e04, 0x1e04, 0x1e06, 0x1e06, 0x1e08, 0x1e08, 0x1e0a, 0x1e0a,
+	0x1e0c, 0x1e0c, 0x1e0e, 0x1e0e, 0x1e10, 0x1e10, 0x1e12, 0x1e12,
+	0x1e14, 0x1e14, 0x1e16, 0x1e16, 0x1e18, 0x1e18, 0x1e1a, 0x1e1a,
+	0x1e1c, 0x1e1c, 0x1e1e, 0x1e1e, 0x1e20, 0x1e20, 0x1e22, 0x1e22,
+	0x1e24, 0x1e24, 0x1e26, 0x1e26, 0x1e28, 0x1e28, 0x1e2a, 0x1e2a,
+	0x1e2c, 0x1e2c, 0x1e2e, 0x1e2e, 0x1e30, 0x1e30, 0x1e32, 0x1e32,
+	0x1e34, 0x1e34, 0x1e36, 0x1e36, 0x1e38, 0x1e38, 0x1e3a, 0x1e3a,
+	0x1e3c, 0x1e3c, 0x1e3e, 0x1e3e, 0x1e40, 0x1e40, 0x1e42, 0x1e42,
+	0x1e44, 0x1e44, 0x1e46, 0x1e46, 0x1e48, 0x1e48, 0x1e4a, 0x1e4a,
+	0x1e4c, 0x1e4c, 0x1e4e, 0x1e4e, 0x1e50, 0x1e50, 0x1e52, 0x1e52,
+	0x1e54, 0x1e54, 0x1e56, 0x1e56, 0x1e58, 0x1e58, 0x1e5a, 0x1e5a,
+	0x1e5c, 0x1e5c, 0x1e5e, 0x1e5e, 0x1e60, 0x1e60, 0x1e62, 0x1e62,
+	0x1e64, 0x1e64, 0x1e66, 0x1e66, 0x1e68, 0x1e68, 0x1e6a, 0x1e6a,
+	0x1e6c, 0x1e6c, 0x1e6e, 0x1e6e, 0x1e70, 0x1e70, 0x1e72, 0x1e72,
+	0x1e74, 0x1e74, 0x1e76, 0x1e76, 0x1e78, 0x1e78, 0x1e7a, 0x1e7a,
+	0x1e7c, 0x1e7c, 0x1e7e, 0x1e7e, 0x1e80, 0x1e80, 0x1e82, 0x1e82,
+	0x1e84, 0x1e84, 0x1e86, 0x1e86, 0x1e88, 0x1e88, 0x1e8a, 0x1e8a,
+	0x1e8c, 0x1e8c, 0x1e8e, 0x1e8e, 0x1e90, 0x1e90, 0x1e92, 0x1e92,
+	0x1e94, 0x1e94, 0x1e96, 0x1e97, 0x1e98, 0x1e99, 0x1e9a, 0x1e9b,
+	0x1e9c, 0x1e9d, 0x1e9e, 0x1e9f, 0x1ea0, 0x1ea0, 0x1ea2, 0x1ea2,
+	0x1ea4, 0x1ea4, 0x1ea6, 0x1ea6, 0x1ea8, 0x1ea8, 0x1eaa, 0x1eaa,
+	0x1eac, 0x1eac, 0x1eae, 0x1eae, 0x1eb0, 0x1eb0, 0x1eb2, 0x1eb2,
+	0x1eb4, 0x1eb4, 0x1eb6, 0x1eb6, 0x1eb8, 0x1eb8, 0x1eba, 0x1eba,
+	0x1ebc, 0x1ebc, 0x1ebe, 0x1ebe, 0x1ec0, 0x1ec0, 0x1ec2, 0x1ec2,
+	0x1ec4, 0x1ec4, 0x1ec6, 0x1ec6, 0x1ec8, 0x1ec8, 0x1eca, 0x1eca,
+	0x1ecc, 0x1ecc, 0x1ece, 0x1ece, 0x1ed0, 0x1ed0, 0x1ed2, 0x1ed2,
+	0x1ed4, 0x1ed4, 0x1ed6, 0x1ed6, 0x1ed8, 0x1ed8, 0x1eda, 0x1eda,
+	0x1edc, 0x1edc, 0x1ede, 0x1ede, 0x1ee0, 0x1ee0, 0x1ee2, 0x1ee2,
+	0x1ee4, 0x1ee4, 0x1ee6, 0x1ee6, 0x1ee8, 0x1ee8, 0x1eea, 0x1eea,
+	0x1eec, 0x1eec, 0x1eee, 0x1eee, 0x1ef0, 0x1ef0, 0x1ef2, 0x1ef2,
+	0x1ef4, 0x1ef4, 0x1ef6, 0x1ef6, 0x1ef8, 0x1ef8, 0x1efa, 0x1efb,
+	0x1efc, 0x1efd, 0x1efe, 0x1eff, 0x1f08, 0x1f09, 0x1f0a, 0x1f0b,
+	0x1f0c, 0x1f0d, 0x1f0e, 0x1f0f, 0x1f08, 0x1f09, 0x1f0a, 0x1f0b,
+	0x1f0c, 0x1f0d, 0x1f0e, 0x1f0f, 0x1f18, 0x1f19, 0x1f1a, 0x1f1b,
+	0x1f1c, 0x1f1d, 0x1f16, 0x1f17, 0x1f18, 0x1f19, 0x1f1a, 0x1f1b,
+	0x1f1c, 0x1f1d, 0x1f1e, 0x1f1f, 0x1f28, 0x1f29, 0x1f2a, 0x1f2b,
+	0x1f2c, 0x1f2d, 0x1f2e, 0x1f2f, 0x1f28, 0x1f29, 0x1f2a, 0x1f2b,
+	0x1f2c, 0x1f2d, 0x1f2e, 0x1f2f, 0x1f38, 0x1f39, 0x1f3a, 0x1f3b,
+	0x1f3c, 0x1f3d, 0x1f3e, 0x1f3f, 0x1f38, 0x1f39, 0x1f3a, 0x1f3b,
+	0x1f3c, 0x1f3d, 0x1f3e, 0x1f3f, 0x1f48, 0x1f49, 0x1f4a, 0x1f4b,
+	0x1f4c, 0x1f4d, 0x1f46, 0x1f47, 0x1f48, 0x1f49, 0x1f4a, 0x1f4b,
+	0x1f4c, 0x1f4d, 0x1f4e, 0x1f4f, 0x1f50, 0x1f59, 0x1f52, 0x1f5b,
+	0x1f54, 0x1f5d, 0x1f56, 0x1f5f, 0x1f58, 0x1f59, 0x1f5a, 0x1f5b,
+	0x1f5c, 0x1f5d, 0x1f5e, 0x1f5f, 0x1f68, 0x1f69, 0x1f6a, 0x1f6b,
+	0x1f6c, 0x1f6d, 0x1f6e, 0x1f6f, 0x1f68, 0x1f69, 0x1f6a, 0x1f6b,
+	0x1f6c, 0x1f6d, 0x1f6e, 0x1f6f, 0x1fba, 0x1fbb, 0x1fc8, 0x1fc9,
+	0x1fca, 0x1fcb, 0x1fda, 0x1fdb, 0x1ff8, 0x1ff9, 0x1fea, 0x1feb,
+	0x1ffa, 0x1ffb, 0x1f7e, 0x1f7f, 0x1f88, 0x1f89, 0x1f8a, 0x1f8b,
+	0x1f8c, 0x1f8d, 0x1f8e, 0x1f8f, 0x1f88, 0x1f89, 0x1f8a, 0x1f8b,
+	0x1f8c, 0x1f8d, 0x1f8e, 0x1f8f, 0x1f98, 0x1f99, 0x1f9a, 0x1f9b,
+	0x1f9c, 0x1f9d, 0x1f9e, 0x1f9f, 0x1f98, 0x1f99, 0x1f9a, 0x1f9b,
+	0x1f9c, 0x1f9d, 0x1f9e, 0x1f9f, 0x1fa8, 0x1fa9, 0x1faa, 0x1fab,
+	0x1fac, 0x1fad, 0x1fae, 0x1faf, 0x1fa8, 0x1fa9, 0x1faa, 0x1fab,
+	0x1fac, 0x1fad, 0x1fae, 0x1faf, 0x1fb8, 0x1fb9, 0x1fb2, 0x1fbc,
+	0x1fb4, 0x1fb5, 0x1fb6, 0x1fb7, 0x1fb8, 0x1fb9, 0x1fba, 0x1fbb,
+	0x1fbc, 0x1fbd, 0x1fbe, 0x1fbf, 0x1fc0, 0x1fc1, 0x1fc2, 0x1fc3,
+	0x1fc4, 0x1fc5, 0x1fc6, 0x1fc7, 0x1fc8, 0x1fc9, 0x1fca, 0x1fcb,
+	0x1fc3, 0x1fcd, 0x1fce, 0x1fcf, 0x1fd8, 0x1fd9, 0x1fd2, 0x1fd3,
+	0x1fd4, 0x1fd5, 0x1fd6, 0x1fd7, 0x1fd8, 0x1fd9, 0x1fda, 0x1fdb,
+	0x1fdc, 0x1fdd, 0x1fde, 0x1fdf, 0x1fe8, 0x1fe9, 0x1fe2, 0x1fe3,
+	0x1fe4, 0x1fec, 0x1fe6, 0x1fe7, 0x1fe8, 0x1fe9, 0x1fea, 0x1feb,
+	0x1fec, 0x1fed, 0x1fee, 0x1fef, 0x1ff0, 0x1ff1, 0x1ff2, 0x1ff3,
+	0x1ff4, 0x1ff5, 0x1ff6, 0x1ff7, 0x1ff8, 0x1ff9, 0x1ffa, 0x1ffb,
+	0x1ff3, 0x1ffd, 0x1ffe, 0x1fff, 0x2000, 0x2001, 0x2002, 0x2003,
+	0x2004, 0x2005, 0x2006, 0x2007, 0x2008, 0x2009, 0x200a, 0x200b,
+	0x200c, 0x200d, 0x200e, 0x200f, 0x2010, 0x2011, 0x2012, 0x2013,
+	0x2014, 0x2015, 0x2016, 0x2017, 0x2018, 0x2019, 0x201a, 0x201b,
+	0x201c, 0x201d, 0x201e, 0x201f, 0x2020, 0x2021, 0x2022, 0x2023,
+	0x2024, 0x2025, 0x2026, 0x2027, 0x2028, 0x2029, 0x202a, 0x202b,
+	0x202c, 0x202d, 0x202e, 0x202f, 0x2030, 0x2031, 0x2032, 0x2033,
+	0x2034, 0x2035, 0x2036, 0x2037, 0x2038, 0x2039, 0x203a, 0x203b,
+	0x203c, 0x203d, 0x203e, 0x203f, 0x2040, 0x2041, 0x2042, 0x2043,
+	0x2044, 0x2045, 0x2046, 0x2047, 0x2048, 0x2049, 0x204a, 0x204b,
+	0x204c, 0x204d, 0x204e, 0x204f, 0x2050, 0x2051, 0x2052, 0x2053,
+	0x2054, 0x2055, 0x2056, 0x2057, 0x2058, 0x2059, 0x205a, 0x205b,
+	0x205c, 0x205d, 0x205e, 0x205f, 0x2060, 0x2061, 0x2062, 0x2063,
+	0x2064, 0x2065, 0x2066, 0x2067, 0x2068, 0x2069, 0x206a, 0x206b,
+	0x206c, 0x206d, 0x206e, 0x206f, 0x2070, 0x2071, 0x2072, 0x2073,
+	0x2074, 0x2075, 0x2076, 0x2077, 0x2078, 0x2079, 0x207a, 0x207b,
+	0x207c, 0x207d, 0x207e, 0x207f, 0x2080, 0x2081, 0x2082, 0x2083,
+	0x2084, 0x2085, 0x2086, 0x2087, 0x2088, 0x2089, 0x208a, 0x208b,
+	0x208c, 0x208d, 0x208e, 0x208f, 0x2090, 0x2091, 0x2092, 0x2093,
+	0x2094, 0x2095, 0x2096, 0x2097, 0x2098, 0x2099, 0x209a, 0x209b,
+	0x209c, 0x209d, 0x209e, 0x209f, 0x20a0, 0x20a1, 0x20a2, 0x20a3,
+	0x20a4, 0x20a5, 0x20a6, 0x20a7, 0x20a8, 0x20a9, 0x20aa, 0x20ab,
+	0x20ac, 0x20ad, 0x20ae, 0x20af, 0x20b0, 0x20b1, 0x20b2, 0x20b3,
+	0x20b4, 0x20b5, 0x20b6, 0x20b7, 0x20b8, 0x20b9, 0x20ba, 0x20bb,
+	0x20bc, 0x20bd, 0x20be, 0x20bf, 0x20c0, 0x20c1, 0x20c2, 0x20c3,
+	0x20c4, 0x20c5, 0x20c6, 0x20c7, 0x20c8, 0x20c9, 0x20ca, 0x20cb,
+	0x20cc, 0x20cd, 0x20ce, 0x20cf, 0x20d0, 0x20d1, 0x20d2, 0x20d3,
+	0x20d4, 0x20d5, 0x20d6, 0x20d7, 0x20d8, 0x20d9, 0x20da, 0x20db,
+	0x20dc, 0x20dd, 0x20de, 0x20df, 0x20e0, 0x20e1, 0x20e2, 0x20e3,
+	0x20e4, 0x20e5, 0x20e6, 0x20e7, 0x20e8, 0x20e9, 0x20ea, 0x20eb,
+	0x20ec, 0x20ed, 0x20ee, 0x20ef, 0x20f0, 0x20f1, 0x20f2, 0x20f3,
+	0x20f4, 0x20f5, 0x20f6, 0x20f7, 0x20f8, 0x20f9, 0x20fa, 0x20fb,
+	0x20fc, 0x20fd, 0x20fe, 0x20ff, 0x2100, 0x2101, 0x2102, 0x2103,
+	0x2104, 0x2105, 0x2106, 0x2107, 0x2108, 0x2109, 0x210a, 0x210b,
+	0x210c, 0x210d, 0x210e, 0x210f, 0x2110, 0x2111, 0x2112, 0x2113,
+	0x2114, 0x2115, 0x2116, 0x2117, 0x2118, 0x2119, 0x211a, 0x211b,
+	0x211c, 0x211d, 0x211e, 0x211f, 0x2120, 0x2121, 0x2122, 0x2123,
+	0x2124, 0x2125, 0x2126, 0x2127, 0x2128, 0x2129, 0x212a, 0x212b,
+	0x212c, 0x212d, 0x212e, 0x212f, 0x2130, 0x2131, 0x2132, 0x2133,
+	0x2134, 0x2135, 0x2136, 0x2137, 0x2138, 0x2139, 0x213a, 0x213b,
+	0x213c, 0x213d, 0x213e, 0x213f, 0x2140, 0x2141, 0x2142, 0x2143,
+	0x2144, 0x2145, 0x2146, 0x2147, 0x2148, 0x2149, 0x214a, 0x214b,
+	0x214c, 0x214d, 0x2132, 0x214f, 0x2150, 0x2151, 0x2152, 0x2153,
+	0x2154, 0x2155, 0x2156, 0x2157, 0x2158, 0x2159, 0x215a, 0x215b,
+	0x215c, 0x215d, 0x215e, 0x215f, 0x2160, 0x2161, 0x2162, 0x2163,
+	0x2164, 0x2165, 0x2166, 0x2167, 0x2168, 0x2169, 0x216a, 0x216b,
+	0x216c, 0x216d, 0x216e, 0x216f, 0x2160, 0x2161, 0x2162, 0x2163,
+	0x2164, 0x2165, 0x2166, 0x2167, 0x2168, 0x2169, 0x216a, 0x216b,
+	0x216c, 0x216d, 0x216e, 0x216f, 0x2180, 0x2181, 0x2182, 0x2183,
+	0x2183, 0xffff, 0x034b, 0x24b6, 0x24b7, 0x24b8, 0x24b9, 0x24ba,
+	0x24bb, 0x24bc, 0x24bd, 0x24be, 0x24bf, 0x24c0, 0x24c1, 0x24c2,
+	0x24c3, 0x24c4, 0x24c5, 0x24c6, 0x24c7, 0x24c8, 0x24c9, 0x24ca,
+	0x24cb, 0x24cc, 0x24cd, 0x24ce, 0x24cf, 0xffff, 0x0746, 0x2c00,
+	0x2c01, 0x2c02, 0x2c03, 0x2c04, 0x2c05, 0x2c06, 0x2c07, 0x2c08,
+	0x2c09, 0x2c0a, 0x2c0b, 0x2c0c, 0x2c0d, 0x2c0e, 0x2c0f, 0x2c10,
+	0x2c11, 0x2c12, 0x2c13, 0x2c14, 0x2c15, 0x2c16, 0x2c17, 0x2c18,
+	0x2c19, 0x2c1a, 0x2c1b, 0x2c1c, 0x2c1d, 0x2c1e, 0x2c1f, 0x2c20,
+	0x2c21, 0x2c22, 0x2c23, 0x2c24, 0x2c25, 0x2c26, 0x2c27, 0x2c28,
+	0x2c29, 0x2c2a, 0x2c2b, 0x2c2c, 0x2c2d, 0x2c2e, 0x2c5f, 0x2c60,
+	0x2c60, 0x2c62, 0x2c63, 0x2c64, 0x2c65, 0x2c66, 0x2c67, 0x2c67,
+	0x2c69, 0x2c69, 0x2c6b, 0x2c6b, 0x2c6d, 0x2c6e, 0x2c6f, 0x2c70,
+	0x2c71, 0x2c72, 0x2c73, 0x2c74, 0x2c75, 0x2c75, 0x2c77, 0x2c78,
+	0x2c79, 0x2c7a, 0x2c7b, 0x2c7c, 0x2c7d, 0x2c7e, 0x2c7f, 0x2c80,
+	0x2c80, 0x2c82, 0x2c82, 0x2c84, 0x2c84, 0x2c86, 0x2c86, 0x2c88,
+	0x2c88, 0x2c8a, 0x2c8a, 0x2c8c, 0x2c8c, 0x2c8e, 0x2c8e, 0x2c90,
+	0x2c90, 0x2c92, 0x2c92, 0x2c94, 0x2c94, 0x2c96, 0x2c96, 0x2c98,
+	0x2c98, 0x2c9a, 0x2c9a, 0x2c9c, 0x2c9c, 0x2c9e, 0x2c9e, 0x2ca0,
+	0x2ca0, 0x2ca2, 0x2ca2, 0x2ca4, 0x2ca4, 0x2ca6, 0x2ca6, 0x2ca8,
+	0x2ca8, 0x2caa, 0x2caa, 0x2cac, 0x2cac, 0x2cae, 0x2cae, 0x2cb0,
+	0x2cb0, 0x2cb2, 0x2cb2, 0x2cb4, 0x2cb4, 0x2cb6, 0x2cb6, 0x2cb8,
+	0x2cb8, 0x2cba, 0x2cba, 0x2cbc, 0x2cbc, 0x2cbe, 0x2cbe, 0x2cc0,
+	0x2cc0, 0x2cc2, 0x2cc2, 0x2cc4, 0x2cc4, 0x2cc6, 0x2cc6, 0x2cc8,
+	0x2cc8, 0x2cca, 0x2cca, 0x2ccc, 0x2ccc, 0x2cce, 0x2cce, 0x2cd0,
+	0x2cd0, 0x2cd2, 0x2cd2, 0x2cd4, 0x2cd4, 0x2cd6, 0x2cd6, 0x2cd8,
+	0x2cd8, 0x2cda, 0x2cda, 0x2cdc, 0x2cdc, 0x2cde, 0x2cde, 0x2ce0,
+	0x2ce0, 0x2ce2, 0x2ce2, 0x2ce4, 0x2ce5, 0x2ce6, 0x2ce7, 0x2ce8,
+	0x2ce9, 0x2cea, 0x2ceb, 0x2cec, 0x2ced, 0x2cee, 0x2cef, 0x2cf0,
+	0x2cf1, 0x2cf2, 0x2cf3, 0x2cf4, 0x2cf5, 0x2cf6, 0x2cf7, 0x2cf8,
+	0x2cf9, 0x2cfa, 0x2cfb, 0x2cfc, 0x2cfd, 0x2cfe, 0x2cff, 0x10a0,
+	0x10a1, 0x10a2, 0x10a3, 0x10a4, 0x10a5, 0x10a6, 0x10a7, 0x10a8,
+	0x10a9, 0x10aa, 0x10ab, 0x10ac, 0x10ad, 0x10ae, 0x10af, 0x10b0,
+	0x10b1, 0x10b2, 0x10b3, 0x10b4, 0x10b5, 0x10b6, 0x10b7, 0x10b8,
+	0x10b9, 0x10ba, 0x10bb, 0x10bc, 0x10bd, 0x10be, 0x10bf, 0x10c0,
+	0x10c1, 0x10c2, 0x10c3, 0x10c4, 0x10c5, 0xffff, 0xd21b, 0xff21,
+	0xff22, 0xff23, 0xff24, 0xff25, 0xff26, 0xff27, 0xff28, 0xff29,
+	0xff2a, 0xff2b, 0xff2c, 0xff2d, 0xff2e, 0xff2f, 0xff30, 0xff31,
+	0xff32, 0xff33, 0xff34, 0xff35, 0xff36, 0xff37, 0xff38, 0xff39,
+	0xff3a, 0xff5b, 0xff5c, 0xff5d, 0xff5e, 0xff5f, 0xff60, 0xff61,
+	0xff62, 0xff63, 0xff64, 0xff65, 0xff66, 0xff67, 0xff68, 0xff69,
+	0xff6a, 0xff6b, 0xff6c, 0xff6d, 0xff6e, 0xff6f, 0xff70, 0xff71,
+	0xff72, 0xff73, 0xff74, 0xff75, 0xff76, 0xff77, 0xff78, 0xff79,
+	0xff7a, 0xff7b, 0xff7c, 0xff7d, 0xff7e, 0xff7f, 0xff80, 0xff81,
+	0xff82, 0xff83, 0xff84, 0xff85, 0xff86, 0xff87, 0xff88, 0xff89,
+	0xff8a, 0xff8b, 0xff8c, 0xff8d, 0xff8e, 0xff8f, 0xff90, 0xff91,
+	0xff92, 0xff93, 0xff94, 0xff95, 0xff96, 0xff97, 0xff98, 0xff99,
+	0xff9a, 0xff9b, 0xff9c, 0xff9d, 0xff9e, 0xff9f, 0xffa0, 0xffa1,
+	0xffa2, 0xffa3, 0xffa4, 0xffa5, 0xffa6, 0xffa7, 0xffa8, 0xffa9,
+	0xffaa, 0xffab, 0xffac, 0xffad, 0xffae, 0xffaf, 0xffb0, 0xffb1,
+	0xffb2, 0xffb3, 0xffb4, 0xffb5, 0xffb6, 0xffb7, 0xffb8, 0xffb9,
+	0xffba, 0xffbb, 0xffbc, 0xffbd, 0xffbe, 0xffbf, 0xffc0, 0xffc1,
+	0xffc2, 0xffc3, 0xffc4, 0xffc5, 0xffc6, 0xffc7, 0xffc8, 0xffc9,
+	0xffca, 0xffcb, 0xffcc, 0xffcd, 0xffce, 0xffcf, 0xffd0, 0xffd1,
+	0xffd2, 0xffd3, 0xffd4, 0xffd5, 0xffd6, 0xffd7, 0xffd8, 0xffd9,
+	0xffda, 0xffdb, 0xffdc, 0xffdd, 0xffde, 0xffdf, 0xffe0, 0xffe1,
+	0xffe2, 0xffe3, 0xffe4, 0xffe5, 0xffe6, 0xffe7, 0xffe8, 0xffe9,
+	0xffea, 0xffeb, 0xffec, 0xffed, 0xffee, 0xffef, 0xfff0, 0xfff1,
+	0xfff2, 0xfff3, 0xfff4, 0xfff5, 0xfff6, 0xfff7, 0xfff8, 0xfff9,
+	0xfffa, 0xfffb, 0xfffc, 0xfffd, 0xfffe, 0xffff,
+};
+
+/*
+ * Allow full-width illegal characters :
+ * "MS windows 7" supports full-width-invalid-name-characters.
+ * So we should check half-width-invalid-name-characters(ASCII) only
+ * for compatibility.
+ *
+ * " * / : < > ? \ |
+ */
+static unsigned short bad_uni_chars[] = {
+	0x0022,         0x002A, 0x002F, 0x003A,
+	0x003C, 0x003E, 0x003F, 0x005C, 0x007C,
+	0
+};
+
+static int exfat_convert_char_to_ucs2(struct nls_table *nls,
+		const unsigned char *ch, int ch_len, unsigned short *ucs2,
+		int *lossy)
+{
+	int len;
+
+	*ucs2 = 0x0;
+
+	if (ch[0] < 0x80) {
+		*ucs2 = ch[0];
+		return 1;
+	}
+
+	len = nls->char2uni(ch, ch_len, ucs2);
+	if (len < 0) {
+		/* conversion failed */
+		if (lossy != NULL)
+			*lossy |= NLS_NAME_LOSSY;
+		*ucs2 = '_';
+		return 1;
+	}
+	return len;
+}
+
+static int exfat_convert_ucs2_to_char(struct nls_table *nls,
+		unsigned short ucs2, unsigned char *ch, int *lossy)
+{
+	int len;
+
+	ch[0] = 0x0;
+
+	if (ucs2 < 0x0080) {
+		ch[0] = ucs2;
+		return 1;
+	}
+
+	len = nls->uni2char(ucs2, ch, MAX_CHARSET_SIZE);
+	if (len < 0) {
+		/* conversion failed */
+		if (lossy != NULL)
+			*lossy |= NLS_NAME_LOSSY;
+		ch[0] = '_';
+		return 1;
+	}
+	return len;
+}
+
+unsigned short exfat_toupper(struct super_block *sb, unsigned short a)
+{
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+
+	return sbi->vol_utbl[a] ? sbi->vol_utbl[a] : a;
+}
+
+static unsigned short *exfat_wstrchr(unsigned short *str, unsigned short wchar)
+{
+	while (*str) {
+		if (*(str++) == wchar)
+			return str;
+	}
+	return NULL;
+}
+
+int exfat_uniname_ncmp(struct super_block *sb, unsigned short *a,
+		unsigned short *b, unsigned int len)
+{
+	int i;
+
+	for (i = 0; i < len; i++, a++, b++)
+		if (exfat_toupper(sb, *a) != exfat_toupper(sb, *b))
+			return 1;
+	return 0;
+}
+
+static int exfat_utf16_to_utf8(struct super_block *sb,
+		struct exfat_uni_name *p_uniname, unsigned char *p_cstring,
+		int buflen)
+{
+	int len;
+	const unsigned short *uniname = p_uniname->name;
+
+	/* always len >= 0 */
+	len = utf16s_to_utf8s(uniname, MAX_NAME_LENGTH, UTF16_HOST_ENDIAN,
+		p_cstring, buflen);
+	p_cstring[len] = '\0';
+	return len;
+}
+
+static int exfat_utf8_to_utf16(struct super_block *sb,
+		const unsigned char *p_cstring, const int len,
+		struct exfat_uni_name *p_uniname, int *p_lossy)
+{
+	int i, unilen, lossy = NLS_NAME_NO_LOSSY;
+	unsigned short upname[MAX_NAME_LENGTH + 1];
+	unsigned short *uniname = p_uniname->name;
+
+	WARN_ON(!len);
+
+	unilen = utf8s_to_utf16s(p_cstring, len, UTF16_HOST_ENDIAN,
+			(wchar_t *)uniname, MAX_NAME_LENGTH + 2);
+	if (unilen < 0) {
+		exfat_msg(sb, KERN_ERR,
+			"failed to %s (err : %d) nls len : %d",
+			__func__, unilen, len);
+		return unilen;
+	}
+
+	if (unilen > MAX_NAME_LENGTH) {
+		exfat_msg(sb, KERN_ERR,
+			"failed to %s (estr:ENAMETOOLONG) nls len : %d, unilen : %d > %d",
+			__func__, len, unilen, MAX_NAME_LENGTH);
+		return -ENAMETOOLONG;
+	}
+
+	p_uniname->name_len = unilen & 0xFF;
+
+	for (i = 0; i < unilen; i++) {
+		if (*uniname < 0x0020 ||
+		    exfat_wstrchr(bad_uni_chars, *uniname))
+			lossy |= NLS_NAME_LOSSY;
+
+		upname[i] = exfat_toupper(sb, *uniname);
+		uniname++;
+	}
+
+	*uniname = '\0';
+	p_uniname->name_len = unilen;
+	p_uniname->name_hash = exfat_calc_chksum_2byte(upname, unilen << 1, 0,
+			CS_DEFAULT);
+
+	if (p_lossy)
+		*p_lossy = lossy;
+	return unilen;
+}
+
+#define PLANE_SIZE	0x00010000
+#define SURROGATE_MASK	0xfffff800
+#define SURROGATE_PAIR	0x0000d800
+#define SURROGATE_LOW	0x00000400
+#define SURROGATE_BITS	0x000003ff
+
+unsigned short exfat_high_surrogate(unicode_t u)
+{
+	return ((u - PLANE_SIZE) >> 10) + SURROGATE_PAIR;
+}
+
+unsigned short exfat_low_surrogate(unicode_t u)
+{
+	return ((u - PLANE_SIZE) & SURROGATE_BITS) | SURROGATE_PAIR |
+		SURROGATE_LOW;
+}
+
+static int __exfat_utf16_to_nls(struct super_block *sb,
+		struct exfat_uni_name *p_uniname, unsigned char *p_cstring,
+		int buflen)
+{
+	int i, j, len, out_len = 0;
+	unsigned char buf[MAX_CHARSET_SIZE];
+	const unsigned short *uniname = p_uniname->name;
+	struct nls_table *nls = EXFAT_SB(sb)->nls_io;
+
+	i = 0;
+	while (i < MAX_NAME_LENGTH && out_len < (buflen - 1)) {
+		if (*uniname == '\0')
+			break;
+		if ((*uniname & SURROGATE_MASK) != SURROGATE_PAIR) {
+			len = exfat_convert_ucs2_to_char(nls, *uniname, buf,
+				NULL);
+		} else {
+			/* Process UTF-16 surrogate pair as one character */
+			if (!(*uniname & SURROGATE_LOW) &&
+			    i+1 < MAX_NAME_LENGTH &&
+			    (*(uniname+1) & SURROGATE_MASK) == SURROGATE_PAIR &&
+			    (*(uniname+1) & SURROGATE_LOW)) {
+				uniname++;
+				i++;
+			}
+
+			/*
+			 * UTF-16 surrogate pair encodes code points above
+			 * U+FFFF. Code points above U+FFFF are not supported
+			 * by kernel NLS framework therefore use replacement
+			 * character
+			 */
+			len = 1;
+			buf[0] = '_';
+		}
+
+		if (out_len + len >= buflen)
+			len = buflen - 1 - out_len;
+		out_len += len;
+
+		if (len > 1) {
+			for (j = 0; j < len; j++)
+				*p_cstring++ = buf[j];
+		} else { /* len == 1 */
+			*p_cstring++ = *buf;
+		}
+
+		uniname++;
+		i++;
+	}
+
+	*p_cstring = '\0';
+	return out_len;
+}
+
+static int exfat_nls_to_ucs2(struct super_block *sb,
+		const unsigned char *p_cstring, const int len,
+		struct exfat_uni_name *p_uniname, int *p_lossy)
+{
+	int i = 0, unilen = 0, lossy = NLS_NAME_NO_LOSSY;
+	unsigned short upname[MAX_NAME_LENGTH + 1];
+	unsigned short *uniname = p_uniname->name;
+	struct nls_table *nls = EXFAT_SB(sb)->nls_io;
+
+	WARN_ON(!len);
+
+	while (unilen < MAX_NAME_LENGTH && i < len) {
+		i += exfat_convert_char_to_ucs2(nls, p_cstring + i, len - i,
+				uniname, &lossy);
+
+		if (*uniname < 0x0020 ||
+		    exfat_wstrchr(bad_uni_chars, *uniname))
+			lossy |= NLS_NAME_LOSSY;
+
+		upname[unilen] = exfat_toupper(sb, *uniname);
+		uniname++;
+		unilen++;
+	}
+
+	if (p_cstring[i] != '\0')
+		lossy |= NLS_NAME_OVERLEN;
+
+	*uniname = '\0';
+	p_uniname->name_len = unilen;
+	p_uniname->name_hash = exfat_calc_chksum_2byte(upname, unilen << 1, 0,
+			CS_DEFAULT);
+
+	if (p_lossy)
+		*p_lossy = lossy;
+	return unilen;
+}
+
+int exfat_utf16_to_nls(struct super_block *sb, struct exfat_uni_name *uniname,
+		unsigned char *p_cstring, int buflen)
+{
+	if (EXFAT_SB(sb)->options.utf8)
+		return exfat_utf16_to_utf8(sb, uniname, p_cstring,
+				buflen);
+	return __exfat_utf16_to_nls(sb, uniname, p_cstring, buflen);
+}
+
+int exfat_nls_to_utf16(struct super_block *sb, const unsigned char *p_cstring,
+		const int len, struct exfat_uni_name *uniname, int *p_lossy)
+{
+	if (EXFAT_SB(sb)->options.utf8)
+		return exfat_utf8_to_utf16(sb, p_cstring, len,
+				uniname, p_lossy);
+	return exfat_nls_to_ucs2(sb, p_cstring, len, uniname, p_lossy);
+}
+
+static int exfat_load_upcase_table(struct super_block *sb,
+		sector_t sector, unsigned long long num_sectors,
+		unsigned int utbl_checksum)
+{
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+	unsigned int sect_size = sb->s_blocksize;
+	unsigned int i, index = 0, checksum = 0;
+	int ret;
+	unsigned char skip = false;
+	unsigned short *upcase_table;
+
+	upcase_table = kcalloc(UTBL_COUNT, sizeof(unsigned short), GFP_KERNEL);
+	if (!upcase_table)
+		return -ENOMEM;
+
+	sbi->vol_utbl = upcase_table;
+	num_sectors += sector;
+
+	while (sector < num_sectors) {
+		struct buffer_head *bh;
+
+		bh = sb_bread(sb, sector);
+		if (!bh) {
+			exfat_msg(sb, KERN_ERR,
+				"failed to read sector(0x%llx)\n",
+				(unsigned long long)sector);
+			ret = -EIO;
+			goto free_table;
+		}
+		sector++;
+		for (i = 0; i < sect_size && index <= 0xFFFF; i += 2) {
+			unsigned short uni = get_unaligned_le16(bh->b_data + i);
+
+			checksum = ((checksum & 1) ? 0x80000000 : 0) +
+				(checksum >> 1) +
+				*(((unsigned char *)bh->b_data) + i);
+			checksum = ((checksum & 1) ? 0x80000000 : 0) +
+				(checksum >> 1) +
+				*(((unsigned char *)bh->b_data) + (i + 1));
+
+			if (skip) {
+				index += uni;
+				skip = false;
+			} else if (uni == index) {
+				index++;
+			} else if (uni == 0xFFFF) {
+				skip = true;
+			} else { /* uni != index , uni != 0xFFFF */
+				upcase_table[index] = uni;
+				index++;
+			}
+		}
+		brelse(bh);
+	}
+
+	if (index >= 0xFFFF && utbl_checksum == checksum)
+		return 0;
+
+	exfat_msg(sb, KERN_ERR,
+			"failed to load upcase table (idx : 0x%08x, chksum : 0x%08x, utbl_chksum : 0x%08x)\n",
+			index, checksum, utbl_checksum);
+	ret = -EINVAL;
+free_table:
+	exfat_free_upcase_table(sbi);
+	return ret;
+}
+
+static int exfat_load_default_upcase_table(struct super_block *sb)
+{
+	int i, ret = -EIO;
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+	unsigned char skip = false;
+	unsigned short uni = 0, *upcase_table;
+	unsigned int index = 0;
+
+	upcase_table = kcalloc(UTBL_COUNT, sizeof(unsigned short), GFP_KERNEL);
+	if (!upcase_table)
+		return -ENOMEM;
+
+	sbi->vol_utbl = upcase_table;
+
+	for (i = 0; index <= 0xFFFF && i < EXFAT_NUM_UPCASE; i++) {
+		uni = uni_def_upcase[i];
+		if (skip) {
+			index += uni;
+			skip = false;
+		} else if (uni == index) {
+			index++;
+		} else if (uni == 0xFFFF) {
+			skip = true;
+		} else {
+			upcase_table[index] = uni;
+			index++;
+		}
+	}
+
+	if (index >= 0xFFFF)
+		return 0;
+
+	/* FATAL error: default upcase table has error */
+	exfat_free_upcase_table(sbi);
+	return ret;
+}
+
+int exfat_create_upcase_table(struct super_block *sb)
+{
+	int i, ret;
+	unsigned int tbl_clu, type;
+	sector_t sector;
+	unsigned long long tbl_size, num_sectors;
+	unsigned char blksize_bits = sb->s_blocksize_bits;
+	struct exfat_chain clu;
+	struct exfat_dentry *ep;
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+	struct buffer_head *bh;
+
+	clu.dir = sbi->root_dir;
+	clu.flags = ALLOC_FAT_CHAIN;
+
+	while (clu.dir != EXFAT_EOF_CLUSTER) {
+		for (i = 0; i < sbi->dentries_per_clu; i++) {
+			ep = exfat_get_dentry(sb, &clu, i, &bh, NULL);
+			if (!ep)
+				return -EIO;
+
+			type = exfat_get_entry_type(ep);
+			if (type == TYPE_UNUSED) {
+				brelse(bh);
+				break;
+			}
+
+			if (type != TYPE_UPCASE) {
+				brelse(bh);
+				continue;
+			}
+
+			tbl_clu  = le32_to_cpu(ep->dentry.upcase.start_clu);
+			tbl_size = le64_to_cpu(ep->dentry.upcase.size);
+
+			sector = exfat_cluster_to_sector(sbi, tbl_clu);
+			num_sectors = ((tbl_size - 1) >> blksize_bits) + 1;
+			ret = exfat_load_upcase_table(sb, sector, num_sectors,
+				le32_to_cpu(ep->dentry.upcase.checksum));
+
+			brelse(bh);
+			if (ret && ret != -EIO)
+				goto load_default;
+
+			/* load successfully */
+			return ret;
+		}
+
+		if (exfat_get_next_cluster(sb, &(clu.dir)))
+			return -EIO;
+	}
+
+load_default:
+	/* load default upcase table */
+	return exfat_load_default_upcase_table(sb);
+}
+
+void exfat_free_upcase_table(struct exfat_sb_info *sbi)
+{
+	kfree(sbi->vol_utbl);
+}
diff --git a/fs/exfat/super.c b/fs/exfat/super.c
new file mode 100644
index 0000000..16ed202e
--- /dev/null
+++ b/fs/exfat/super.c
@@ -0,0 +1,722 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Copyright (C) 2012-2013 Samsung Electronics Co., Ltd.
+ */
+
+#include <linux/fs_context.h>
+#include <linux/fs_parser.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/mount.h>
+#include <linux/cred.h>
+#include <linux/statfs.h>
+#include <linux/seq_file.h>
+#include <linux/blkdev.h>
+#include <linux/fs_struct.h>
+#include <linux/iversion.h>
+#include <linux/nls.h>
+#include <linux/buffer_head.h>
+
+#include "exfat_raw.h"
+#include "exfat_fs.h"
+
+static char exfat_default_iocharset[] = CONFIG_EXFAT_DEFAULT_IOCHARSET;
+static struct kmem_cache *exfat_inode_cachep;
+
+static void exfat_free_iocharset(struct exfat_sb_info *sbi)
+{
+	if (sbi->options.iocharset != exfat_default_iocharset)
+		kfree(sbi->options.iocharset);
+}
+
+static void exfat_delayed_free(struct rcu_head *p)
+{
+	struct exfat_sb_info *sbi = container_of(p, struct exfat_sb_info, rcu);
+
+	unload_nls(sbi->nls_io);
+	exfat_free_iocharset(sbi);
+	exfat_free_upcase_table(sbi);
+	kfree(sbi);
+}
+
+static void exfat_put_super(struct super_block *sb)
+{
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+
+	mutex_lock(&sbi->s_lock);
+	if (test_and_clear_bit(EXFAT_SB_DIRTY, &sbi->s_state))
+		sync_blockdev(sb->s_bdev);
+	exfat_set_vol_flags(sb, VOL_CLEAN);
+	exfat_free_bitmap(sbi);
+	mutex_unlock(&sbi->s_lock);
+
+	call_rcu(&sbi->rcu, exfat_delayed_free);
+}
+
+static int exfat_sync_fs(struct super_block *sb, int wait)
+{
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+	int err = 0;
+
+	/* If there are some dirty buffers in the bdev inode */
+	mutex_lock(&sbi->s_lock);
+	if (test_and_clear_bit(EXFAT_SB_DIRTY, &sbi->s_state)) {
+		sync_blockdev(sb->s_bdev);
+		if (exfat_set_vol_flags(sb, VOL_CLEAN))
+			err = -EIO;
+	}
+	mutex_unlock(&sbi->s_lock);
+	return err;
+}
+
+static int exfat_statfs(struct dentry *dentry, struct kstatfs *buf)
+{
+	struct super_block *sb = dentry->d_sb;
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+	unsigned long long id = huge_encode_dev(sb->s_bdev->bd_dev);
+
+	if (sbi->used_clusters == EXFAT_CLUSTERS_UNTRACKED) {
+		mutex_lock(&sbi->s_lock);
+		if (exfat_count_used_clusters(sb, &sbi->used_clusters)) {
+			mutex_unlock(&sbi->s_lock);
+			return -EIO;
+		}
+		mutex_unlock(&sbi->s_lock);
+	}
+
+	buf->f_type = sb->s_magic;
+	buf->f_bsize = sbi->cluster_size;
+	buf->f_blocks = sbi->num_clusters - 2; /* clu 0 & 1 */
+	buf->f_bfree = buf->f_blocks - sbi->used_clusters;
+	buf->f_bavail = buf->f_bfree;
+	buf->f_fsid.val[0] = (unsigned int)id;
+	buf->f_fsid.val[1] = (unsigned int)(id >> 32);
+	/* Unicode utf16 255 characters */
+	buf->f_namelen = EXFAT_MAX_FILE_LEN * NLS_MAX_CHARSET_SIZE;
+	return 0;
+}
+
+int exfat_set_vol_flags(struct super_block *sb, unsigned short new_flag)
+{
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+	struct pbr64 *bpb;
+	bool sync = 0;
+
+	/* flags are not changed */
+	if (sbi->vol_flag == new_flag)
+		return 0;
+
+	sbi->vol_flag = new_flag;
+
+	/* skip updating volume dirty flag,
+	 * if this volume has been mounted with read-only
+	 */
+	if (sb_rdonly(sb))
+		return 0;
+
+	if (!sbi->pbr_bh) {
+		sbi->pbr_bh = sb_bread(sb, 0);
+		if (!sbi->pbr_bh) {
+			exfat_msg(sb, KERN_ERR, "failed to read boot sector");
+			return -ENOMEM;
+		}
+	}
+
+	bpb = (struct pbr64 *)sbi->pbr_bh->b_data;
+	bpb->bsx.vol_flags = cpu_to_le16(new_flag);
+
+	if (new_flag == VOL_DIRTY && !buffer_dirty(sbi->pbr_bh))
+		sync = true;
+	else
+		sync = false;
+
+	set_buffer_uptodate(sbi->pbr_bh);
+	mark_buffer_dirty(sbi->pbr_bh);
+
+	if (sync)
+		sync_dirty_buffer(sbi->pbr_bh);
+	return 0;
+}
+
+static int exfat_show_options(struct seq_file *m, struct dentry *root)
+{
+	struct super_block *sb = root->d_sb;
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+	struct exfat_mount_options *opts = &sbi->options;
+
+	/* Show partition info */
+	if (!uid_eq(opts->fs_uid, GLOBAL_ROOT_UID))
+		seq_printf(m, ",uid=%u",
+				from_kuid_munged(&init_user_ns, opts->fs_uid));
+	if (!gid_eq(opts->fs_gid, GLOBAL_ROOT_GID))
+		seq_printf(m, ",gid=%u",
+				from_kgid_munged(&init_user_ns, opts->fs_gid));
+	seq_printf(m, ",fmask=%04o,dmask=%04o", opts->fs_fmask, opts->fs_dmask);
+	if (opts->allow_utime)
+		seq_printf(m, ",allow_utime=%04o", opts->allow_utime);
+	if (opts->utf8)
+		seq_puts(m, ",iocharset=utf8");
+	else if (sbi->nls_io)
+		seq_printf(m, ",iocharset=%s", sbi->nls_io->charset);
+	seq_printf(m, ",bps=%ld", sb->s_blocksize);
+	if (opts->errors == EXFAT_ERRORS_CONT)
+		seq_puts(m, ",errors=continue");
+	else if (opts->errors == EXFAT_ERRORS_PANIC)
+		seq_puts(m, ",errors=panic");
+	else
+		seq_puts(m, ",errors=remount-ro");
+	if (opts->discard)
+		seq_puts(m, ",discard");
+	if (opts->time_offset)
+		seq_printf(m, ",time_offset=%d", opts->time_offset);
+	return 0;
+}
+
+static struct inode *exfat_alloc_inode(struct super_block *sb)
+{
+	struct exfat_inode_info *ei;
+
+	ei = kmem_cache_alloc(exfat_inode_cachep, GFP_NOFS);
+	if (!ei)
+		return NULL;
+
+	init_rwsem(&ei->truncate_lock);
+	return &ei->vfs_inode;
+}
+
+static void exfat_free_inode(struct inode *inode)
+{
+	kmem_cache_free(exfat_inode_cachep, EXFAT_I(inode));
+}
+
+static const struct super_operations exfat_sops = {
+	.alloc_inode	= exfat_alloc_inode,
+	.free_inode	= exfat_free_inode,
+	.write_inode	= exfat_write_inode,
+	.evict_inode	= exfat_evict_inode,
+	.put_super	= exfat_put_super,
+	.sync_fs	= exfat_sync_fs,
+	.statfs		= exfat_statfs,
+	.show_options	= exfat_show_options,
+};
+
+enum {
+	Opt_uid,
+	Opt_gid,
+	Opt_umask,
+	Opt_dmask,
+	Opt_fmask,
+	Opt_allow_utime,
+	Opt_charset,
+	Opt_errors,
+	Opt_discard,
+	Opt_time_offset,
+};
+
+static const struct constant_table exfat_param_enums[] = {
+	{ "continue",		EXFAT_ERRORS_CONT },
+	{ "panic",		EXFAT_ERRORS_PANIC },
+	{ "remount-ro",		EXFAT_ERRORS_RO },
+	{}
+};
+
+static const struct fs_parameter_spec exfat_parameters[] = {
+	fsparam_u32("uid",			Opt_uid),
+	fsparam_u32("gid",			Opt_gid),
+	fsparam_u32oct("umask",			Opt_umask),
+	fsparam_u32oct("dmask",			Opt_dmask),
+	fsparam_u32oct("fmask",			Opt_fmask),
+	fsparam_u32oct("allow_utime",		Opt_allow_utime),
+	fsparam_string("iocharset",		Opt_charset),
+	fsparam_enum("errors",			Opt_errors, exfat_param_enums),
+	fsparam_flag("discard",			Opt_discard),
+	fsparam_s32("time_offset",		Opt_time_offset),
+	{}
+};
+
+static int exfat_parse_param(struct fs_context *fc, struct fs_parameter *param)
+{
+	struct exfat_sb_info *sbi = fc->s_fs_info;
+	struct exfat_mount_options *opts = &sbi->options;
+	struct fs_parse_result result;
+	int opt;
+
+	opt = fs_parse(fc, exfat_parameters, param, &result);
+	if (opt < 0)
+		return opt;
+
+	switch (opt) {
+	case Opt_uid:
+		opts->fs_uid = make_kuid(current_user_ns(), result.uint_32);
+		break;
+	case Opt_gid:
+		opts->fs_gid = make_kgid(current_user_ns(), result.uint_32);
+		break;
+	case Opt_umask:
+		opts->fs_fmask = result.uint_32;
+		opts->fs_dmask = result.uint_32;
+		break;
+	case Opt_dmask:
+		opts->fs_dmask = result.uint_32;
+		break;
+	case Opt_fmask:
+		opts->fs_fmask = result.uint_32;
+		break;
+	case Opt_allow_utime:
+		opts->allow_utime = result.uint_32 & 0022;
+		break;
+	case Opt_charset:
+		exfat_free_iocharset(sbi);
+		opts->iocharset = kstrdup(param->string, GFP_KERNEL);
+		if (!opts->iocharset)
+			return -ENOMEM;
+		break;
+	case Opt_errors:
+		opts->errors = result.uint_32;
+		break;
+	case Opt_discard:
+		opts->discard = 1;
+		break;
+	case Opt_time_offset:
+		/*
+		 * Make the limit 24 just in case someone invents something
+		 * unusual.
+		 */
+		if (result.int_32 < -24 * 60 || result.int_32 > 24 * 60)
+			return -EINVAL;
+		opts->time_offset = result.int_32;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void exfat_hash_init(struct super_block *sb)
+{
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+	int i;
+
+	spin_lock_init(&sbi->inode_hash_lock);
+	for (i = 0; i < EXFAT_HASH_SIZE; i++)
+		INIT_HLIST_HEAD(&sbi->inode_hashtable[i]);
+}
+
+static int exfat_read_root(struct inode *inode)
+{
+	struct super_block *sb = inode->i_sb;
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+	struct exfat_inode_info *ei = EXFAT_I(inode);
+	struct exfat_chain cdir;
+	int num_subdirs, num_clu = 0;
+
+	exfat_chain_set(&ei->dir, sbi->root_dir, 0, ALLOC_FAT_CHAIN);
+	ei->entry = -1;
+	ei->start_clu = sbi->root_dir;
+	ei->flags = ALLOC_FAT_CHAIN;
+	ei->type = TYPE_DIR;
+	ei->version = 0;
+	ei->rwoffset = 0;
+	ei->hint_bmap.off = EXFAT_EOF_CLUSTER;
+	ei->hint_stat.eidx = 0;
+	ei->hint_stat.clu = sbi->root_dir;
+	ei->hint_femp.eidx = EXFAT_HINT_NONE;
+
+	exfat_chain_set(&cdir, sbi->root_dir, 0, ALLOC_FAT_CHAIN);
+	if (exfat_count_num_clusters(sb, &cdir, &num_clu))
+		return -EIO;
+	i_size_write(inode, num_clu << sbi->cluster_size_bits);
+
+	num_subdirs = exfat_count_dir_entries(sb, &cdir);
+	if (num_subdirs < 0)
+		return -EIO;
+	set_nlink(inode, num_subdirs + EXFAT_MIN_SUBDIR);
+
+	inode->i_uid = sbi->options.fs_uid;
+	inode->i_gid = sbi->options.fs_gid;
+	inode_inc_iversion(inode);
+	inode->i_generation = 0;
+	inode->i_mode = exfat_make_mode(sbi, ATTR_SUBDIR, 0777);
+	inode->i_op = &exfat_dir_inode_operations;
+	inode->i_fop = &exfat_dir_operations;
+
+	inode->i_blocks = ((i_size_read(inode) + (sbi->cluster_size - 1))
+			& ~(sbi->cluster_size - 1)) >> inode->i_blkbits;
+	EXFAT_I(inode)->i_pos = ((loff_t)sbi->root_dir << 32) | 0xffffffff;
+	EXFAT_I(inode)->i_size_aligned = i_size_read(inode);
+	EXFAT_I(inode)->i_size_ondisk = i_size_read(inode);
+
+	exfat_save_attr(inode, ATTR_SUBDIR);
+	inode->i_mtime = inode->i_atime = inode->i_ctime = ei->i_crtime =
+		current_time(inode);
+	exfat_cache_init_inode(inode);
+	return 0;
+}
+
+static struct pbr *exfat_read_pbr_with_logical_sector(struct super_block *sb,
+		struct buffer_head **prev_bh)
+{
+	struct pbr *p_pbr = (struct pbr *) (*prev_bh)->b_data;
+	unsigned short logical_sect = 0;
+
+	logical_sect = 1 << p_pbr->bsx.f64.sect_size_bits;
+
+	if (!is_power_of_2(logical_sect) ||
+	    logical_sect < 512 || logical_sect > 4096) {
+		exfat_msg(sb, KERN_ERR, "bogus logical sector size %u",
+				logical_sect);
+		return NULL;
+	}
+
+	if (logical_sect < sb->s_blocksize) {
+		exfat_msg(sb, KERN_ERR,
+			"logical sector size too small for device (logical sector size = %u)",
+			logical_sect);
+		return NULL;
+	}
+
+	if (logical_sect > sb->s_blocksize) {
+		struct buffer_head *bh = NULL;
+
+		__brelse(*prev_bh);
+		*prev_bh = NULL;
+
+		if (!sb_set_blocksize(sb, logical_sect)) {
+			exfat_msg(sb, KERN_ERR,
+				"unable to set blocksize %u", logical_sect);
+			return NULL;
+		}
+		bh = sb_bread(sb, 0);
+		if (!bh) {
+			exfat_msg(sb, KERN_ERR,
+				"unable to read boot sector (logical sector size = %lu)",
+				sb->s_blocksize);
+			return NULL;
+		}
+
+		*prev_bh = bh;
+		p_pbr = (struct pbr *) bh->b_data;
+	}
+	return p_pbr;
+}
+
+/* mount the file system volume */
+static int __exfat_fill_super(struct super_block *sb)
+{
+	int ret;
+	struct pbr *p_pbr;
+	struct pbr64 *p_bpb;
+	struct buffer_head *bh;
+	struct exfat_sb_info *sbi = EXFAT_SB(sb);
+
+	/* set block size to read super block */
+	sb_min_blocksize(sb, 512);
+
+	/* read boot sector */
+	bh = sb_bread(sb, 0);
+	if (!bh) {
+		exfat_msg(sb, KERN_ERR, "unable to read boot sector");
+		return -EIO;
+	}
+
+	/* PRB is read */
+	p_pbr = (struct pbr *)bh->b_data;
+
+	/* check the validity of PBR */
+	if (le16_to_cpu((p_pbr->signature)) != PBR_SIGNATURE) {
+		exfat_msg(sb, KERN_ERR, "invalid boot record signature");
+		ret = -EINVAL;
+		goto free_bh;
+	}
+
+
+	/* check logical sector size */
+	p_pbr = exfat_read_pbr_with_logical_sector(sb, &bh);
+	if (!p_pbr) {
+		ret = -EIO;
+		goto free_bh;
+	}
+
+	/*
+	 * res_zero field must be filled with zero to prevent mounting
+	 * from FAT volume.
+	 */
+	if (memchr_inv(p_pbr->bpb.f64.res_zero, 0,
+			sizeof(p_pbr->bpb.f64.res_zero))) {
+		ret = -EINVAL;
+		goto free_bh;
+	}
+
+	p_bpb = (struct pbr64 *)p_pbr;
+	if (!p_bpb->bsx.num_fats) {
+		exfat_msg(sb, KERN_ERR, "bogus number of FAT structure");
+		ret = -EINVAL;
+		goto free_bh;
+	}
+
+	sbi->sect_per_clus = 1 << p_bpb->bsx.sect_per_clus_bits;
+	sbi->sect_per_clus_bits = p_bpb->bsx.sect_per_clus_bits;
+	sbi->cluster_size_bits = sbi->sect_per_clus_bits + sb->s_blocksize_bits;
+	sbi->cluster_size = 1 << sbi->cluster_size_bits;
+	sbi->num_FAT_sectors = le32_to_cpu(p_bpb->bsx.fat_length);
+	sbi->FAT1_start_sector = le32_to_cpu(p_bpb->bsx.fat_offset);
+	sbi->FAT2_start_sector = p_bpb->bsx.num_fats == 1 ?
+		sbi->FAT1_start_sector :
+			sbi->FAT1_start_sector + sbi->num_FAT_sectors;
+	sbi->data_start_sector = le32_to_cpu(p_bpb->bsx.clu_offset);
+	sbi->num_sectors = le64_to_cpu(p_bpb->bsx.vol_length);
+	/* because the cluster index starts with 2 */
+	sbi->num_clusters = le32_to_cpu(p_bpb->bsx.clu_count) +
+		EXFAT_RESERVED_CLUSTERS;
+
+	sbi->root_dir = le32_to_cpu(p_bpb->bsx.root_cluster);
+	sbi->dentries_per_clu = 1 <<
+		(sbi->cluster_size_bits - DENTRY_SIZE_BITS);
+
+	sbi->vol_flag = le16_to_cpu(p_bpb->bsx.vol_flags);
+	sbi->clu_srch_ptr = EXFAT_FIRST_CLUSTER;
+	sbi->used_clusters = EXFAT_CLUSTERS_UNTRACKED;
+
+	if (le16_to_cpu(p_bpb->bsx.vol_flags) & VOL_DIRTY) {
+		sbi->vol_flag |= VOL_DIRTY;
+		exfat_msg(sb, KERN_WARNING,
+			"Volume was not properly unmounted. Some data may be corrupt. Please run fsck.");
+	}
+
+	/* exFAT file size is limited by a disk volume size */
+	sb->s_maxbytes = (u64)(sbi->num_clusters - EXFAT_RESERVED_CLUSTERS) <<
+		sbi->cluster_size_bits;
+
+	ret = exfat_create_upcase_table(sb);
+	if (ret) {
+		exfat_msg(sb, KERN_ERR, "failed to load upcase table");
+		goto free_bh;
+	}
+
+	ret = exfat_load_bitmap(sb);
+	if (ret) {
+		exfat_msg(sb, KERN_ERR, "failed to load alloc-bitmap");
+		goto free_upcase_table;
+	}
+
+	ret = exfat_count_used_clusters(sb, &sbi->used_clusters);
+	if (ret) {
+		exfat_msg(sb, KERN_ERR, "failed to scan clusters");
+		goto free_alloc_bitmap;
+	}
+
+	return 0;
+
+free_alloc_bitmap:
+	exfat_free_bitmap(sbi);
+free_upcase_table:
+	exfat_free_upcase_table(sbi);
+free_bh:
+	brelse(bh);
+	return ret;
+}
+
+static int exfat_fill_super(struct super_block *sb, struct fs_context *fc)
+{
+	struct exfat_sb_info *sbi = sb->s_fs_info;
+	struct exfat_mount_options *opts = &sbi->options;
+	struct inode *root_inode;
+	int err;
+
+	if (opts->allow_utime == (unsigned short)-1)
+		opts->allow_utime = ~opts->fs_dmask & 0022;
+
+	if (opts->discard) {
+		struct request_queue *q = bdev_get_queue(sb->s_bdev);
+
+		if (!blk_queue_discard(q))
+			exfat_msg(sb, KERN_WARNING,
+				"mounting with \"discard\" option, but the device does not support discard");
+		opts->discard = 0;
+	}
+
+	sb->s_flags |= SB_NODIRATIME;
+	sb->s_magic = EXFAT_SUPER_MAGIC;
+	sb->s_op = &exfat_sops;
+
+	sb->s_time_gran = 1;
+	sb->s_time_min = EXFAT_MIN_TIMESTAMP_SECS;
+	sb->s_time_max = EXFAT_MAX_TIMESTAMP_SECS;
+
+	err = __exfat_fill_super(sb);
+	if (err) {
+		exfat_msg(sb, KERN_ERR, "failed to recognize exfat type");
+		goto check_nls_io;
+	}
+
+	/* set up enough so that it can read an inode */
+	exfat_hash_init(sb);
+
+	if (!strcmp(sbi->options.iocharset, "utf8"))
+		opts->utf8 = 1;
+	else {
+		sbi->nls_io = load_nls(sbi->options.iocharset);
+		if (!sbi->nls_io) {
+			exfat_msg(sb, KERN_ERR, "IO charset %s not found",
+					sbi->options.iocharset);
+			err = -EINVAL;
+			goto free_table;
+		}
+	}
+
+	if (sbi->options.utf8)
+		sb->s_d_op = &exfat_utf8_dentry_ops;
+	else
+		sb->s_d_op = &exfat_dentry_ops;
+
+	root_inode = new_inode(sb);
+	if (!root_inode) {
+		exfat_msg(sb, KERN_ERR, "failed to allocate root inode.");
+		err = -ENOMEM;
+		goto free_table;
+	}
+
+	root_inode->i_ino = EXFAT_ROOT_INO;
+	inode_set_iversion(root_inode, 1);
+	err = exfat_read_root(root_inode);
+	if (err) {
+		exfat_msg(sb, KERN_ERR, "failed to initialize root inode.");
+		goto put_inode;
+	}
+
+	exfat_hash_inode(root_inode, EXFAT_I(root_inode)->i_pos);
+	insert_inode_hash(root_inode);
+
+	sb->s_root = d_make_root(root_inode);
+	if (!sb->s_root) {
+		exfat_msg(sb, KERN_ERR, "failed to get the root dentry");
+		err = -ENOMEM;
+		goto put_inode;
+	}
+
+	return 0;
+
+put_inode:
+	iput(root_inode);
+	sb->s_root = NULL;
+
+free_table:
+	exfat_free_upcase_table(sbi);
+	exfat_free_bitmap(sbi);
+
+check_nls_io:
+	unload_nls(sbi->nls_io);
+	exfat_free_iocharset(sbi);
+	sb->s_fs_info = NULL;
+	kfree(sbi);
+	return err;
+}
+
+static int exfat_get_tree(struct fs_context *fc)
+{
+	return get_tree_bdev(fc, exfat_fill_super);
+}
+
+static void exfat_free(struct fs_context *fc)
+{
+	kfree(fc->s_fs_info);
+}
+
+static const struct fs_context_operations exfat_context_ops = {
+	.parse_param	= exfat_parse_param,
+	.get_tree	= exfat_get_tree,
+	.free		= exfat_free,
+};
+
+static int exfat_init_fs_context(struct fs_context *fc)
+{
+	struct exfat_sb_info *sbi;
+
+	sbi = kzalloc(sizeof(struct exfat_sb_info), GFP_KERNEL);
+	if (!sbi)
+		return -ENOMEM;
+
+	mutex_init(&sbi->s_lock);
+	ratelimit_state_init(&sbi->ratelimit, DEFAULT_RATELIMIT_INTERVAL,
+			DEFAULT_RATELIMIT_BURST);
+
+	sbi->options.fs_uid = current_uid();
+	sbi->options.fs_gid = current_gid();
+	sbi->options.fs_fmask = current->fs->umask;
+	sbi->options.fs_dmask = current->fs->umask;
+	sbi->options.allow_utime = -1;
+	sbi->options.iocharset = exfat_default_iocharset;
+	sbi->options.errors = EXFAT_ERRORS_RO;
+
+	fc->s_fs_info = sbi;
+	fc->ops = &exfat_context_ops;
+	return 0;
+}
+
+static struct file_system_type exfat_fs_type = {
+	.owner			= THIS_MODULE,
+	.name			= "exfat",
+	.init_fs_context	= exfat_init_fs_context,
+	.parameters		= exfat_parameters,
+	.kill_sb		= kill_block_super,
+	.fs_flags		= FS_REQUIRES_DEV,
+};
+
+static void exfat_inode_init_once(void *foo)
+{
+	struct exfat_inode_info *ei = (struct exfat_inode_info *)foo;
+
+	INIT_HLIST_NODE(&ei->i_hash_fat);
+	inode_init_once(&ei->vfs_inode);
+}
+
+static int __init init_exfat_fs(void)
+{
+	int err;
+
+	err = exfat_cache_init();
+	if (err)
+		return err;
+
+	exfat_inode_cachep = kmem_cache_create("exfat_inode_cache",
+			sizeof(struct exfat_inode_info),
+			0, SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD,
+			exfat_inode_init_once);
+	if (!exfat_inode_cachep) {
+		err = -ENOMEM;
+		goto shutdown_cache;
+	}
+
+	err = register_filesystem(&exfat_fs_type);
+	if (err)
+		goto destroy_cache;
+
+	return 0;
+
+destroy_cache:
+	kmem_cache_destroy(exfat_inode_cachep);
+shutdown_cache:
+	exfat_cache_shutdown();
+	return err;
+}
+
+static void __exit exit_exfat_fs(void)
+{
+	/*
+	 * Make sure all delayed rcu free inodes are flushed before we
+	 * destroy cache.
+	 */
+	rcu_barrier();
+	kmem_cache_destroy(exfat_inode_cachep);
+	unregister_filesystem(&exfat_fs_type);
+	exfat_cache_shutdown();
+}
+
+module_init(init_exfat_fs);
+module_exit(exit_exfat_fs);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("exFAT filesystem support");
+MODULE_AUTHOR("Samsung Electronics Co., Ltd.");
diff --git a/fs/ext2/xattr.c b/fs/ext2/xattr.c
index 0456bc9..943cc46 100644
--- a/fs/ext2/xattr.c
+++ b/fs/ext2/xattr.c
@@ -56,6 +56,7 @@
 
 #include <linux/buffer_head.h>
 #include <linux/init.h>
+#include <linux/printk.h>
 #include <linux/slab.h>
 #include <linux/mbcache.h>
 #include <linux/quotaops.h>
@@ -84,8 +85,8 @@
 		printk("\n"); \
 	} while (0)
 #else
-# define ea_idebug(f...)
-# define ea_bdebug(f...)
+# define ea_idebug(inode, f...)	no_printk(f)
+# define ea_bdebug(bh, f...)	no_printk(f)
 #endif
 
 static int ext2_xattr_set2(struct inode *, struct buffer_head *,
@@ -790,7 +791,15 @@ ext2_xattr_delete_inode(struct inode *inode)
 	struct buffer_head *bh = NULL;
 	struct ext2_sb_info *sbi = EXT2_SB(inode->i_sb);
 
-	down_write(&EXT2_I(inode)->xattr_sem);
+	/*
+	 * We are the only ones holding inode reference. The xattr_sem should
+	 * better be unlocked! We could as well just not acquire xattr_sem at
+	 * all but this makes the code more futureproof. OTOH we need trylock
+	 * here to avoid false-positive warning from lockdep about reclaim
+	 * circular dependency.
+	 */
+	if (WARN_ON_ONCE(!down_write_trylock(&EXT2_I(inode)->xattr_sem)))
+		return;
 	if (!EXT2_I(inode)->i_file_acl)
 		goto cleanup;
 
@@ -864,8 +873,7 @@ ext2_xattr_cache_insert(struct mb_cache *cache, struct buffer_head *bh)
 				      true);
 	if (error) {
 		if (error == -EBUSY) {
-			ea_bdebug(bh, "already in cache (%d cache entries)",
-				atomic_read(&ext2_xattr_cache->c_entry_count));
+			ea_bdebug(bh, "already in cache");
 			error = 0;
 		}
 	} else
diff --git a/fs/ext2/xattr.h b/fs/ext2/xattr.h
index cee888c..16272e6 100644
--- a/fs/ext2/xattr.h
+++ b/fs/ext2/xattr.h
@@ -39,7 +39,7 @@ struct ext2_xattr_entry {
 	__le32	e_value_block;	/* disk block attribute is stored on (n/i) */
 	__le32	e_value_size;	/* size of attribute value */
 	__le32	e_hash;		/* hash value of name and value */
-	char	e_name[0];	/* attribute name */
+	char	e_name[];	/* attribute name */
 };
 
 #define EXT2_XATTR_PAD_BITS		2
diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c
index 8fd0b3c..a32e5f7 100644
--- a/fs/ext4/balloc.c
+++ b/fs/ext4/balloc.c
@@ -410,7 +410,7 @@ static int ext4_validate_block_bitmap(struct super_block *sb,
  * Read the bitmap for a given block_group,and validate the
  * bits for block/inode/inode tables are set in the bitmaps
  *
- * Return buffer_head on success or NULL in case of failure.
+ * Return buffer_head on success or an ERR_PTR in case of failure.
  */
 struct buffer_head *
 ext4_read_block_bitmap_nowait(struct super_block *sb, ext4_group_t block_group)
@@ -502,7 +502,7 @@ ext4_read_block_bitmap_nowait(struct super_block *sb, ext4_group_t block_group)
 	return ERR_PTR(err);
 }
 
-/* Returns 0 on success, 1 on error */
+/* Returns 0 on success, -errno on error */
 int ext4_wait_block_bitmap(struct super_block *sb, ext4_group_t block_group,
 			   struct buffer_head *bh)
 {
@@ -516,10 +516,9 @@ int ext4_wait_block_bitmap(struct super_block *sb, ext4_group_t block_group,
 	wait_on_buffer(bh);
 	ext4_simulate_fail_bh(sb, bh, EXT4_SIM_BBITMAP_EIO);
 	if (!buffer_uptodate(bh)) {
-		ext4_set_errno(sb, EIO);
-		ext4_error(sb, "Cannot read block bitmap - "
-			   "block_group = %u, block_bitmap = %llu",
-			   block_group, (unsigned long long) bh->b_blocknr);
+		ext4_error_err(sb, EIO, "Cannot read block bitmap - "
+			       "block_group = %u, block_bitmap = %llu",
+			       block_group, (unsigned long long) bh->b_blocknr);
 		ext4_mark_group_bitmap_corrupted(sb, block_group,
 					EXT4_GROUP_INFO_BBITMAP_CORRUPT);
 		return -EIO;
diff --git a/fs/ext4/block_validity.c b/fs/ext4/block_validity.c
index 0a734ff..16e9b2f 100644
--- a/fs/ext4/block_validity.c
+++ b/fs/ext4/block_validity.c
@@ -166,10 +166,8 @@ static int ext4_data_block_valid_rcu(struct ext4_sb_info *sbi,
 
 	if ((start_blk <= le32_to_cpu(sbi->s_es->s_first_data_block)) ||
 	    (start_blk + count < start_blk) ||
-	    (start_blk + count > ext4_blocks_count(sbi->s_es))) {
-		sbi->s_es->s_last_error_block = cpu_to_le64(start_blk);
+	    (start_blk + count > ext4_blocks_count(sbi->s_es)))
 		return 0;
-	}
 
 	if (system_blks == NULL)
 		return 1;
@@ -181,10 +179,8 @@ static int ext4_data_block_valid_rcu(struct ext4_sb_info *sbi,
 			n = n->rb_left;
 		else if (start_blk >= (entry->start_blk + entry->count))
 			n = n->rb_right;
-		else {
-			sbi->s_es->s_last_error_block = cpu_to_le64(start_blk);
+		else
 			return 0;
-		}
 	}
 	return 1;
 }
@@ -220,10 +216,12 @@ static int ext4_protect_reserved_inode(struct super_block *sb,
 		} else {
 			if (!ext4_data_block_valid_rcu(sbi, system_blks,
 						map.m_pblk, n)) {
-				ext4_error(sb, "blocks %llu-%llu from inode %u "
-					   "overlap system zone", map.m_pblk,
-					   map.m_pblk + map.m_len - 1, ino);
 				err = -EFSCORRUPTED;
+				__ext4_error(sb, __func__, __LINE__, -err,
+					     map.m_pblk, "blocks %llu-%llu "
+					     "from inode %u overlap system zone",
+					     map.m_pblk,
+					     map.m_pblk + map.m_len - 1, ino);
 				break;
 			}
 			err = add_system_zone(system_blks, map.m_pblk, n);
@@ -365,7 +363,6 @@ int ext4_data_block_valid(struct ext4_sb_info *sbi, ext4_fsblk_t start_blk,
 int ext4_check_blockref(const char *function, unsigned int line,
 			struct inode *inode, __le32 *p, unsigned int max)
 {
-	struct ext4_super_block *es = EXT4_SB(inode->i_sb)->s_es;
 	__le32 *bref = p;
 	unsigned int blk;
 
@@ -379,7 +376,6 @@ int ext4_check_blockref(const char *function, unsigned int line,
 		if (blk &&
 		    unlikely(!ext4_data_block_valid(EXT4_SB(inode->i_sb),
 						    blk, 1))) {
-			es->s_last_error_block = cpu_to_le64(blk);
 			ext4_error_inode(inode, function, line, blk,
 					 "invalid block");
 			return -EFSCORRUPTED;
diff --git a/fs/ext4/dir.c b/fs/ext4/dir.c
index 9aa1f75..c654205 100644
--- a/fs/ext4/dir.c
+++ b/fs/ext4/dir.c
@@ -392,7 +392,7 @@ struct fname {
 	__u32		inode;
 	__u8		name_len;
 	__u8		file_type;
-	char		name[0];
+	char		name[];
 };
 
 /*
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index 61b37a0..91eb438 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -414,7 +414,7 @@ struct flex_groups {
 #define EXT4_EXTENTS_FL			0x00080000 /* Inode uses extents */
 #define EXT4_VERITY_FL			0x00100000 /* Verity protected inode */
 #define EXT4_EA_INODE_FL	        0x00200000 /* Inode used for large EA */
-#define EXT4_EOFBLOCKS_FL		0x00400000 /* Blocks allocated beyond EOF */
+/* 0x00400000 was formerly EXT4_EOFBLOCKS_FL */
 #define EXT4_INLINE_DATA_FL		0x10000000 /* Inode has inline data. */
 #define EXT4_PROJINHERIT_FL		0x20000000 /* Create with parents projid */
 #define EXT4_CASEFOLD_FL		0x40000000 /* Casefolded file */
@@ -487,7 +487,7 @@ enum {
 	EXT4_INODE_EXTENTS	= 19,	/* Inode uses extents */
 	EXT4_INODE_VERITY	= 20,	/* Verity protected inode */
 	EXT4_INODE_EA_INODE	= 21,	/* Inode used for large EA */
-	EXT4_INODE_EOFBLOCKS	= 22,	/* Blocks allocated beyond EOF */
+/* 22 was formerly EXT4_INODE_EOFBLOCKS */
 	EXT4_INODE_INLINE_DATA	= 28,	/* Data in inode. */
 	EXT4_INODE_PROJINHERIT	= 29,	/* Create with parents projid */
 	EXT4_INODE_RESERVED	= 31,	/* reserved for ext4 lib */
@@ -533,7 +533,6 @@ static inline void ext4_check_flag_values(void)
 	CHECK_FLAG_VALUE(EXTENTS);
 	CHECK_FLAG_VALUE(VERITY);
 	CHECK_FLAG_VALUE(EA_INODE);
-	CHECK_FLAG_VALUE(EOFBLOCKS);
 	CHECK_FLAG_VALUE(INLINE_DATA);
 	CHECK_FLAG_VALUE(PROJINHERIT);
 	CHECK_FLAG_VALUE(RESERVED);
@@ -2771,21 +2770,20 @@ extern const char *ext4_decode_error(struct super_block *sb, int errno,
 extern void ext4_mark_group_bitmap_corrupted(struct super_block *sb,
 					     ext4_group_t block_group,
 					     unsigned int flags);
-extern void ext4_set_errno(struct super_block *sb, int err);
 
-extern __printf(4, 5)
-void __ext4_error(struct super_block *, const char *, unsigned int,
+extern __printf(6, 7)
+void __ext4_error(struct super_block *, const char *, unsigned int, int, __u64,
 		  const char *, ...);
-extern __printf(5, 6)
-void __ext4_error_inode(struct inode *, const char *, unsigned int, ext4_fsblk_t,
-		      const char *, ...);
+extern __printf(6, 7)
+void __ext4_error_inode(struct inode *, const char *, unsigned int,
+			ext4_fsblk_t, int, const char *, ...);
 extern __printf(5, 6)
 void __ext4_error_file(struct file *, const char *, unsigned int, ext4_fsblk_t,
 		     const char *, ...);
 extern void __ext4_std_error(struct super_block *, const char *,
 			     unsigned int, int);
-extern __printf(4, 5)
-void __ext4_abort(struct super_block *, const char *, unsigned int,
+extern __printf(5, 6)
+void __ext4_abort(struct super_block *, const char *, unsigned int, int,
 		  const char *, ...);
 extern __printf(4, 5)
 void __ext4_warning(struct super_block *, const char *, unsigned int,
@@ -2806,8 +2804,12 @@ void __ext4_grp_locked_error(const char *, unsigned int,
 #define EXT4_ERROR_INODE(inode, fmt, a...) \
 	ext4_error_inode((inode), __func__, __LINE__, 0, (fmt), ## a)
 
-#define EXT4_ERROR_INODE_BLOCK(inode, block, fmt, a...)			\
-	ext4_error_inode((inode), __func__, __LINE__, (block), (fmt), ## a)
+#define EXT4_ERROR_INODE_ERR(inode, err, fmt, a...)			\
+	__ext4_error_inode((inode), __func__, __LINE__, 0, (err), (fmt), ## a)
+
+#define ext4_error_inode_block(inode, block, err, fmt, a...)		\
+	__ext4_error_inode((inode), __func__, __LINE__, (block), (err),	\
+			   (fmt), ## a)
 
 #define EXT4_ERROR_FILE(file, block, fmt, a...)				\
 	ext4_error_file((file), __func__, __LINE__, (block), (fmt), ## a)
@@ -2815,13 +2817,18 @@ void __ext4_grp_locked_error(const char *, unsigned int,
 #ifdef CONFIG_PRINTK
 
 #define ext4_error_inode(inode, func, line, block, fmt, ...)		\
-	__ext4_error_inode(inode, func, line, block, fmt, ##__VA_ARGS__)
+	__ext4_error_inode(inode, func, line, block, 0, fmt, ##__VA_ARGS__)
+#define ext4_error_inode_err(inode, func, line, block, err, fmt, ...)	\
+	__ext4_error_inode((inode), (func), (line), (block), 		\
+			   (err), (fmt), ##__VA_ARGS__)
 #define ext4_error_file(file, func, line, block, fmt, ...)		\
 	__ext4_error_file(file, func, line, block, fmt, ##__VA_ARGS__)
 #define ext4_error(sb, fmt, ...)					\
-	__ext4_error(sb, __func__, __LINE__, fmt, ##__VA_ARGS__)
-#define ext4_abort(sb, fmt, ...)					\
-	__ext4_abort(sb, __func__, __LINE__, fmt, ##__VA_ARGS__)
+	__ext4_error((sb), __func__, __LINE__, 0, 0, (fmt), ##__VA_ARGS__)
+#define ext4_error_err(sb, err, fmt, ...)				\
+	__ext4_error((sb), __func__, __LINE__, (err), 0, (fmt), ##__VA_ARGS__)
+#define ext4_abort(sb, err, fmt, ...)					\
+	__ext4_abort((sb), __func__, __LINE__, (err), (fmt), ##__VA_ARGS__)
 #define ext4_warning(sb, fmt, ...)					\
 	__ext4_warning(sb, __func__, __LINE__, fmt, ##__VA_ARGS__)
 #define ext4_warning_inode(inode, fmt, ...)				\
@@ -2839,7 +2846,12 @@ void __ext4_grp_locked_error(const char *, unsigned int,
 #define ext4_error_inode(inode, func, line, block, fmt, ...)		\
 do {									\
 	no_printk(fmt, ##__VA_ARGS__);					\
-	__ext4_error_inode(inode, "", 0, block, " ");			\
+	__ext4_error_inode(inode, "", 0, block, 0, " ");		\
+} while (0)
+#define ext4_error_inode_err(inode, func, line, block, err, fmt, ...)	\
+do {									\
+	no_printk(fmt, ##__VA_ARGS__);					\
+	__ext4_error_inode(inode, "", 0, block, err, " ");		\
 } while (0)
 #define ext4_error_file(file, func, line, block, fmt, ...)		\
 do {									\
@@ -2849,12 +2861,17 @@ do {									\
 #define ext4_error(sb, fmt, ...)					\
 do {									\
 	no_printk(fmt, ##__VA_ARGS__);					\
-	__ext4_error(sb, "", 0, " ");					\
+	__ext4_error(sb, "", 0, 0, 0, " ");				\
 } while (0)
-#define ext4_abort(sb, fmt, ...)					\
+#define ext4_error_err(sb, err, fmt, ...)				\
 do {									\
 	no_printk(fmt, ##__VA_ARGS__);					\
-	__ext4_abort(sb, "", 0, " ");					\
+	__ext4_error(sb, "", 0, err, 0, " ");				\
+} while (0)
+#define ext4_abort(sb, err, fmt, ...)					\
+do {									\
+	no_printk(fmt, ##__VA_ARGS__);					\
+	__ext4_abort(sb, "", 0, err, " ");				\
 } while (0)
 #define ext4_warning(sb, fmt, ...)					\
 do {									\
diff --git a/fs/ext4/ext4_jbd2.c b/fs/ext4/ext4_jbd2.c
index 1f53d64..0c76cdd 100644
--- a/fs/ext4/ext4_jbd2.c
+++ b/fs/ext4/ext4_jbd2.c
@@ -80,8 +80,7 @@ static int ext4_journal_check_start(struct super_block *sb)
 	 * take the FS itself readonly cleanly.
 	 */
 	if (journal && is_journal_aborted(journal)) {
-		ext4_set_errno(sb, -journal->j_errno);
-		ext4_abort(sb, "Detected aborted journal");
+		ext4_abort(sb, -journal->j_errno, "Detected aborted journal");
 		return -EROFS;
 	}
 	return 0;
@@ -272,8 +271,7 @@ int __ext4_forget(const char *where, unsigned int line, handle_t *handle,
 	if (err) {
 		ext4_journal_abort_handle(where, line, __func__,
 					  bh, handle, err);
-		ext4_set_errno(inode->i_sb, -err);
-		__ext4_abort(inode->i_sb, where, line,
+		__ext4_abort(inode->i_sb, where, line, -err,
 			   "error %d when attempting revoke", err);
 	}
 	BUFFER_TRACE(bh, "exit");
@@ -332,6 +330,7 @@ int __ext4_handle_dirty_metadata(const char *where, unsigned int line,
 					 err);
 		}
 	} else {
+		set_buffer_uptodate(bh);
 		if (inode)
 			mark_buffer_dirty_inode(bh, inode);
 		else
@@ -339,14 +338,8 @@ int __ext4_handle_dirty_metadata(const char *where, unsigned int line,
 		if (inode && inode_needs_sync(inode)) {
 			sync_dirty_buffer(bh);
 			if (buffer_req(bh) && !buffer_uptodate(bh)) {
-				struct ext4_super_block *es;
-
-				es = EXT4_SB(inode->i_sb)->s_es;
-				es->s_last_error_block =
-					cpu_to_le64(bh->b_blocknr);
-				ext4_set_errno(inode->i_sb, EIO);
-				ext4_error_inode(inode, where, line,
-						 bh->b_blocknr,
+				ext4_error_inode_err(inode, where, line,
+						     bh->b_blocknr, EIO,
 					"IO error syncing itable block");
 				err = -EIO;
 			}
diff --git a/fs/ext4/ext4_jbd2.h b/fs/ext4/ext4_jbd2.h
index 7ea4f6f..4b9002f 100644
--- a/fs/ext4/ext4_jbd2.h
+++ b/fs/ext4/ext4_jbd2.h
@@ -512,6 +512,9 @@ static inline int ext4_should_dioread_nolock(struct inode *inode)
 		return 0;
 	if (ext4_should_journal_data(inode))
 		return 0;
+	/* temporary fix to prevent generic/422 test failures */
+	if (!test_opt(inode->i_sb, DELALLOC))
+		return 0;
 	return 1;
 }
 
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index 954013d..f2b577b 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -28,6 +28,7 @@
 #include <linux/uaccess.h>
 #include <linux/fiemap.h>
 #include <linux/backing-dev.h>
+#include <linux/iomap.h>
 #include "ext4_jbd2.h"
 #include "ext4_extents.h"
 #include "xattr.h"
@@ -83,13 +84,6 @@ static void ext4_extent_block_csum_set(struct inode *inode,
 	et->et_checksum = ext4_extent_block_csum(inode, eh);
 }
 
-static int ext4_split_extent(handle_t *handle,
-				struct inode *inode,
-				struct ext4_ext_path **ppath,
-				struct ext4_map_blocks *map,
-				int split_flag,
-				int flags);
-
 static int ext4_split_extent_at(handle_t *handle,
 			     struct inode *inode,
 			     struct ext4_ext_path **ppath,
@@ -97,9 +91,6 @@ static int ext4_split_extent_at(handle_t *handle,
 			     int split_flag,
 			     int flags);
 
-static int ext4_find_delayed_extent(struct inode *inode,
-				    struct extent_status *newes);
-
 static int ext4_ext_trunc_restart_fn(struct inode *inode, int *dropped)
 {
 	/*
@@ -358,8 +349,8 @@ static int ext4_valid_extent_idx(struct inode *inode,
 }
 
 static int ext4_valid_extent_entries(struct inode *inode,
-				struct ext4_extent_header *eh,
-				int depth)
+				     struct ext4_extent_header *eh,
+				     ext4_fsblk_t *pblk, int depth)
 {
 	unsigned short entries;
 	if (eh->eh_entries == 0)
@@ -370,8 +361,6 @@ static int ext4_valid_extent_entries(struct inode *inode,
 	if (depth == 0) {
 		/* leaf entries */
 		struct ext4_extent *ext = EXT_FIRST_EXTENT(eh);
-		struct ext4_super_block *es = EXT4_SB(inode->i_sb)->s_es;
-		ext4_fsblk_t pblock = 0;
 		ext4_lblk_t lblock = 0;
 		ext4_lblk_t prev = 0;
 		int len = 0;
@@ -383,8 +372,7 @@ static int ext4_valid_extent_entries(struct inode *inode,
 			lblock = le32_to_cpu(ext->ee_block);
 			len = ext4_ext_get_actual_len(ext);
 			if ((lblock <= prev) && prev) {
-				pblock = ext4_ext_pblock(ext);
-				es->s_last_error_block = cpu_to_le64(pblock);
+				*pblk = ext4_ext_pblock(ext);
 				return 0;
 			}
 			ext++;
@@ -431,7 +419,7 @@ static int __ext4_ext_check(const char *function, unsigned int line,
 		error_msg = "invalid eh_entries";
 		goto corrupted;
 	}
-	if (!ext4_valid_extent_entries(inode, eh, depth)) {
+	if (!ext4_valid_extent_entries(inode, eh, &pblk, depth)) {
 		error_msg = "invalid extent entries";
 		goto corrupted;
 	}
@@ -449,14 +437,14 @@ static int __ext4_ext_check(const char *function, unsigned int line,
 	return 0;
 
 corrupted:
-	ext4_set_errno(inode->i_sb, -err);
-	ext4_error_inode(inode, function, line, 0,
-			 "pblk %llu bad header/extent: %s - magic %x, "
-			 "entries %u, max %u(%u), depth %u(%u)",
-			 (unsigned long long) pblk, error_msg,
-			 le16_to_cpu(eh->eh_magic),
-			 le16_to_cpu(eh->eh_entries), le16_to_cpu(eh->eh_max),
-			 max, le16_to_cpu(eh->eh_depth), depth);
+	ext4_error_inode_err(inode, function, line, 0, -err,
+			     "pblk %llu bad header/extent: %s - magic %x, "
+			     "entries %u, max %u(%u), depth %u(%u)",
+			     (unsigned long long) pblk, error_msg,
+			     le16_to_cpu(eh->eh_magic),
+			     le16_to_cpu(eh->eh_entries),
+			     le16_to_cpu(eh->eh_max),
+			     max, le16_to_cpu(eh->eh_depth), depth);
 	return err;
 }
 
@@ -556,6 +544,12 @@ int ext4_ext_precache(struct inode *inode)
 	down_read(&ei->i_data_sem);
 	depth = ext_depth(inode);
 
+	/* Don't cache anything if there are no external extent blocks */
+	if (!depth) {
+		up_read(&ei->i_data_sem);
+		return ret;
+	}
+
 	path = kcalloc(depth + 1, sizeof(struct ext4_ext_path),
 		       GFP_NOFS);
 	if (path == NULL) {
@@ -563,9 +557,6 @@ int ext4_ext_precache(struct inode *inode)
 		return -ENOMEM;
 	}
 
-	/* Don't cache anything if there are no external extent blocks */
-	if (depth == 0)
-		goto out;
 	path[0].p_hdr = ext_inode_hdr(inode);
 	ret = ext4_ext_check(inode, path[0].p_hdr, depth, 0);
 	if (ret)
@@ -2134,155 +2125,6 @@ int ext4_ext_insert_extent(handle_t *handle, struct inode *inode,
 	return err;
 }
 
-static int ext4_fill_fiemap_extents(struct inode *inode,
-				    ext4_lblk_t block, ext4_lblk_t num,
-				    struct fiemap_extent_info *fieinfo)
-{
-	struct ext4_ext_path *path = NULL;
-	struct ext4_extent *ex;
-	struct extent_status es;
-	ext4_lblk_t next, next_del, start = 0, end = 0;
-	ext4_lblk_t last = block + num;
-	int exists, depth = 0, err = 0;
-	unsigned int flags = 0;
-	unsigned char blksize_bits = inode->i_sb->s_blocksize_bits;
-
-	while (block < last && block != EXT_MAX_BLOCKS) {
-		num = last - block;
-		/* find extent for this block */
-		down_read(&EXT4_I(inode)->i_data_sem);
-
-		path = ext4_find_extent(inode, block, &path, 0);
-		if (IS_ERR(path)) {
-			up_read(&EXT4_I(inode)->i_data_sem);
-			err = PTR_ERR(path);
-			path = NULL;
-			break;
-		}
-
-		depth = ext_depth(inode);
-		if (unlikely(path[depth].p_hdr == NULL)) {
-			up_read(&EXT4_I(inode)->i_data_sem);
-			EXT4_ERROR_INODE(inode, "path[%d].p_hdr == NULL", depth);
-			err = -EFSCORRUPTED;
-			break;
-		}
-		ex = path[depth].p_ext;
-		next = ext4_ext_next_allocated_block(path);
-
-		flags = 0;
-		exists = 0;
-		if (!ex) {
-			/* there is no extent yet, so try to allocate
-			 * all requested space */
-			start = block;
-			end = block + num;
-		} else if (le32_to_cpu(ex->ee_block) > block) {
-			/* need to allocate space before found extent */
-			start = block;
-			end = le32_to_cpu(ex->ee_block);
-			if (block + num < end)
-				end = block + num;
-		} else if (block >= le32_to_cpu(ex->ee_block)
-					+ ext4_ext_get_actual_len(ex)) {
-			/* need to allocate space after found extent */
-			start = block;
-			end = block + num;
-			if (end >= next)
-				end = next;
-		} else if (block >= le32_to_cpu(ex->ee_block)) {
-			/*
-			 * some part of requested space is covered
-			 * by found extent
-			 */
-			start = block;
-			end = le32_to_cpu(ex->ee_block)
-				+ ext4_ext_get_actual_len(ex);
-			if (block + num < end)
-				end = block + num;
-			exists = 1;
-		} else {
-			BUG();
-		}
-		BUG_ON(end <= start);
-
-		if (!exists) {
-			es.es_lblk = start;
-			es.es_len = end - start;
-			es.es_pblk = 0;
-		} else {
-			es.es_lblk = le32_to_cpu(ex->ee_block);
-			es.es_len = ext4_ext_get_actual_len(ex);
-			es.es_pblk = ext4_ext_pblock(ex);
-			if (ext4_ext_is_unwritten(ex))
-				flags |= FIEMAP_EXTENT_UNWRITTEN;
-		}
-
-		/*
-		 * Find delayed extent and update es accordingly. We call
-		 * it even in !exists case to find out whether es is the
-		 * last existing extent or not.
-		 */
-		next_del = ext4_find_delayed_extent(inode, &es);
-		if (!exists && next_del) {
-			exists = 1;
-			flags |= (FIEMAP_EXTENT_DELALLOC |
-				  FIEMAP_EXTENT_UNKNOWN);
-		}
-		up_read(&EXT4_I(inode)->i_data_sem);
-
-		if (unlikely(es.es_len == 0)) {
-			EXT4_ERROR_INODE(inode, "es.es_len == 0");
-			err = -EFSCORRUPTED;
-			break;
-		}
-
-		/*
-		 * This is possible iff next == next_del == EXT_MAX_BLOCKS.
-		 * we need to check next == EXT_MAX_BLOCKS because it is
-		 * possible that an extent is with unwritten and delayed
-		 * status due to when an extent is delayed allocated and
-		 * is allocated by fallocate status tree will track both of
-		 * them in a extent.
-		 *
-		 * So we could return a unwritten and delayed extent, and
-		 * its block is equal to 'next'.
-		 */
-		if (next == next_del && next == EXT_MAX_BLOCKS) {
-			flags |= FIEMAP_EXTENT_LAST;
-			if (unlikely(next_del != EXT_MAX_BLOCKS ||
-				     next != EXT_MAX_BLOCKS)) {
-				EXT4_ERROR_INODE(inode,
-						 "next extent == %u, next "
-						 "delalloc extent = %u",
-						 next, next_del);
-				err = -EFSCORRUPTED;
-				break;
-			}
-		}
-
-		if (exists) {
-			err = fiemap_fill_next_extent(fieinfo,
-				(__u64)es.es_lblk << blksize_bits,
-				(__u64)es.es_pblk << blksize_bits,
-				(__u64)es.es_len << blksize_bits,
-				flags);
-			if (err < 0)
-				break;
-			if (err == 1) {
-				err = 0;
-				break;
-			}
-		}
-
-		block = es.es_lblk + es.es_len;
-	}
-
-	ext4_ext_drop_refs(path);
-	kfree(path);
-	return err;
-}
-
 static int ext4_fill_es_cache_info(struct inode *inode,
 				   ext4_lblk_t block, ext4_lblk_t num,
 				   struct fiemap_extent_info *fieinfo)
@@ -3532,8 +3374,8 @@ static int ext4_ext_convert_to_initialized(handle_t *handle,
 		(unsigned long long)map->m_lblk, map_len);
 
 	sbi = EXT4_SB(inode->i_sb);
-	eof_block = (inode->i_size + inode->i_sb->s_blocksize - 1) >>
-		inode->i_sb->s_blocksize_bits;
+	eof_block = (EXT4_I(inode)->i_disksize + inode->i_sb->s_blocksize - 1)
+			>> inode->i_sb->s_blocksize_bits;
 	if (eof_block < map->m_lblk + map_len)
 		eof_block = map->m_lblk + map_len;
 
@@ -3785,8 +3627,8 @@ static int ext4_split_convert_extents(handle_t *handle,
 		  __func__, inode->i_ino,
 		  (unsigned long long)map->m_lblk, map->m_len);
 
-	eof_block = (inode->i_size + inode->i_sb->s_blocksize - 1) >>
-		inode->i_sb->s_blocksize_bits;
+	eof_block = (EXT4_I(inode)->i_disksize + inode->i_sb->s_blocksize - 1)
+			>> inode->i_sb->s_blocksize_bits;
 	if (eof_block < map->m_lblk + map->m_len)
 		eof_block = map->m_lblk + map->m_len;
 	/*
@@ -3874,64 +3716,11 @@ static int ext4_convert_unwritten_extents_endio(handle_t *handle,
 	return err;
 }
 
-/*
- * Handle EOFBLOCKS_FL flag, clearing it if necessary
- */
-static int check_eofblocks_fl(handle_t *handle, struct inode *inode,
-			      ext4_lblk_t lblk,
-			      struct ext4_ext_path *path,
-			      unsigned int len)
-{
-	int i, depth;
-	struct ext4_extent_header *eh;
-	struct ext4_extent *last_ex;
-
-	if (!ext4_test_inode_flag(inode, EXT4_INODE_EOFBLOCKS))
-		return 0;
-
-	depth = ext_depth(inode);
-	eh = path[depth].p_hdr;
-
-	/*
-	 * We're going to remove EOFBLOCKS_FL entirely in future so we
-	 * do not care for this case anymore. Simply remove the flag
-	 * if there are no extents.
-	 */
-	if (unlikely(!eh->eh_entries))
-		goto out;
-	last_ex = EXT_LAST_EXTENT(eh);
-	/*
-	 * We should clear the EOFBLOCKS_FL flag if we are writing the
-	 * last block in the last extent in the file.  We test this by
-	 * first checking to see if the caller to
-	 * ext4_ext_get_blocks() was interested in the last block (or
-	 * a block beyond the last block) in the current extent.  If
-	 * this turns out to be false, we can bail out from this
-	 * function immediately.
-	 */
-	if (lblk + len < le32_to_cpu(last_ex->ee_block) +
-	    ext4_ext_get_actual_len(last_ex))
-		return 0;
-	/*
-	 * If the caller does appear to be planning to write at or
-	 * beyond the end of the current extent, we then test to see
-	 * if the current extent is the last extent in the file, by
-	 * checking to make sure it was reached via the rightmost node
-	 * at each level of the tree.
-	 */
-	for (i = depth-1; i >= 0; i--)
-		if (path[i].p_idx != EXT_LAST_INDEX(path[i].p_hdr))
-			return 0;
-out:
-	ext4_clear_inode_flag(inode, EXT4_INODE_EOFBLOCKS);
-	return ext4_mark_inode_dirty(handle, inode);
-}
-
 static int
 convert_initialized_extent(handle_t *handle, struct inode *inode,
 			   struct ext4_map_blocks *map,
 			   struct ext4_ext_path **ppath,
-			   unsigned int allocated)
+			   unsigned int *allocated)
 {
 	struct ext4_ext_path *path = *ppath;
 	struct ext4_extent *ex;
@@ -3991,14 +3780,12 @@ convert_initialized_extent(handle_t *handle, struct inode *inode,
 	ext4_ext_show_leaf(inode, path);
 
 	ext4_update_inode_fsync_trans(handle, inode, 1);
-	err = check_eofblocks_fl(handle, inode, map->m_lblk, path, map->m_len);
-	if (err)
-		return err;
+
 	map->m_flags |= EXT4_MAP_UNWRITTEN;
-	if (allocated > map->m_len)
-		allocated = map->m_len;
-	map->m_len = allocated;
-	return allocated;
+	if (*allocated > map->m_len)
+		*allocated = map->m_len;
+	map->m_len = *allocated;
+	return 0;
 }
 
 static int
@@ -4007,7 +3794,9 @@ ext4_ext_handle_unwritten_extents(handle_t *handle, struct inode *inode,
 			struct ext4_ext_path **ppath, int flags,
 			unsigned int allocated, ext4_fsblk_t newblock)
 {
+#ifdef EXT_DEBUG
 	struct ext4_ext_path *path = *ppath;
+#endif
 	int ret = 0;
 	int err = 0;
 
@@ -4047,11 +3836,9 @@ ext4_ext_handle_unwritten_extents(handle_t *handle, struct inode *inode,
 		}
 		ret = ext4_convert_unwritten_extents_endio(handle, inode, map,
 							   ppath);
-		if (ret >= 0) {
+		if (ret >= 0)
 			ext4_update_inode_fsync_trans(handle, inode, 1);
-			err = check_eofblocks_fl(handle, inode, map->m_lblk,
-						 path, map->m_len);
-		} else
+		else
 			err = ret;
 		map->m_flags |= EXT4_MAP_MAPPED;
 		map->m_pblk = newblock;
@@ -4100,12 +3887,6 @@ ext4_ext_handle_unwritten_extents(handle_t *handle, struct inode *inode,
 
 map_out:
 	map->m_flags |= EXT4_MAP_MAPPED;
-	if ((flags & EXT4_GET_BLOCKS_KEEP_SIZE) == 0) {
-		err = check_eofblocks_fl(handle, inode, map->m_lblk, path,
-					 map->m_len);
-		if (err < 0)
-			goto out2;
-	}
 out1:
 	if (allocated > map->m_len)
 		allocated = map->m_len;
@@ -4244,12 +4025,11 @@ int ext4_ext_map_blocks(handle_t *handle, struct inode *inode,
 	struct ext4_extent newex, *ex, *ex2;
 	struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
 	ext4_fsblk_t newblock = 0;
-	int free_on_err = 0, err = 0, depth, ret;
+	int err = 0, depth, ret;
 	unsigned int allocated = 0, offset = 0;
 	unsigned int allocated_clusters = 0;
 	struct ext4_allocation_request ar;
 	ext4_lblk_t cluster_offset;
-	bool map_from_cluster = false;
 
 	ext_debug("blocks %u/%u requested for inode %lu\n",
 		  map->m_lblk, map->m_len, inode->i_ino);
@@ -4308,12 +4088,12 @@ int ext4_ext_map_blocks(handle_t *handle, struct inode *inode,
 			 */
 			if ((!ext4_ext_is_unwritten(ex)) &&
 			    (flags & EXT4_GET_BLOCKS_CONVERT_UNWRITTEN)) {
-				allocated = convert_initialized_extent(
-						handle, inode, map, &path,
-						allocated);
+				err = convert_initialized_extent(handle,
+					inode, map, &path, &allocated);
 				goto out2;
-			} else if (!ext4_ext_is_unwritten(ex))
+			} else if (!ext4_ext_is_unwritten(ex)) {
 				goto out;
+			}
 
 			ret = ext4_ext_handle_unwritten_extents(
 				handle, inode, map, &path, flags,
@@ -4364,7 +4144,6 @@ int ext4_ext_map_blocks(handle_t *handle, struct inode *inode,
 	    get_implied_cluster_alloc(inode->i_sb, map, ex, path)) {
 		ar.len = allocated = map->m_len;
 		newblock = map->m_pblk;
-		map_from_cluster = true;
 		goto got_allocated_blocks;
 	}
 
@@ -4385,7 +4164,6 @@ int ext4_ext_map_blocks(handle_t *handle, struct inode *inode,
 	    get_implied_cluster_alloc(inode->i_sb, map, ex2, path)) {
 		ar.len = allocated = map->m_len;
 		newblock = map->m_pblk;
-		map_from_cluster = true;
 		goto got_allocated_blocks;
 	}
 
@@ -4442,7 +4220,6 @@ int ext4_ext_map_blocks(handle_t *handle, struct inode *inode,
 		goto out2;
 	ext_debug("allocate new block: goal %llu, found %llu/%u\n",
 		  ar.goal, newblock, allocated);
-	free_on_err = 1;
 	allocated_clusters = ar.len;
 	ar.len = EXT4_C2B(sbi, ar.len) - offset;
 	if (ar.len > allocated)
@@ -4453,28 +4230,28 @@ int ext4_ext_map_blocks(handle_t *handle, struct inode *inode,
 	ext4_ext_store_pblock(&newex, newblock + offset);
 	newex.ee_len = cpu_to_le16(ar.len);
 	/* Mark unwritten */
-	if (flags & EXT4_GET_BLOCKS_UNWRIT_EXT){
+	if (flags & EXT4_GET_BLOCKS_UNWRIT_EXT) {
 		ext4_ext_mark_unwritten(&newex);
 		map->m_flags |= EXT4_MAP_UNWRITTEN;
 	}
 
-	err = 0;
-	if ((flags & EXT4_GET_BLOCKS_KEEP_SIZE) == 0)
-		err = check_eofblocks_fl(handle, inode, map->m_lblk,
-					 path, ar.len);
-	if (!err)
-		err = ext4_ext_insert_extent(handle, inode, &path,
-					     &newex, flags);
+	err = ext4_ext_insert_extent(handle, inode, &path, &newex, flags);
+	if (err) {
+		if (allocated_clusters) {
+			int fb_flags = 0;
 
-	if (err && free_on_err) {
-		int fb_flags = flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE ?
-			EXT4_FREE_BLOCKS_NO_QUOT_UPDATE : 0;
-		/* free data blocks we just allocated */
-		/* not a good idea to call discard here directly,
-		 * but otherwise we'd need to call it every free() */
-		ext4_discard_preallocations(inode);
-		ext4_free_blocks(handle, inode, NULL, newblock,
-				 EXT4_C2B(sbi, allocated_clusters), fb_flags);
+			/*
+			 * free data blocks we just allocated.
+			 * not a good idea to call discard here directly,
+			 * but otherwise we'd need to call it every free().
+			 */
+			ext4_discard_preallocations(inode);
+			if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE)
+				fb_flags = EXT4_FREE_BLOCKS_NO_QUOT_UPDATE;
+			ext4_free_blocks(handle, inode, NULL, newblock,
+					 EXT4_C2B(sbi, allocated_clusters),
+					 fb_flags);
+		}
 		goto out2;
 	}
 
@@ -4491,7 +4268,7 @@ int ext4_ext_map_blocks(handle_t *handle, struct inode *inode,
 	 * clusters discovered to be delayed allocated.  Once allocated, a
 	 * cluster is not included in the reserved count.
 	 */
-	if (test_opt(inode->i_sb, DELALLOC) && !map_from_cluster) {
+	if (test_opt(inode->i_sb, DELALLOC) && allocated_clusters) {
 		if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE) {
 			/*
 			 * When allocating delayed allocated clusters, simply
@@ -4645,10 +4422,6 @@ static int ext4_alloc_file_blocks(struct file *file, ext4_lblk_t offset,
 				epos = new_size;
 			if (ext4_update_inode_size(inode, epos) & 0x1)
 				inode->i_mtime = inode->i_ctime;
-		} else {
-			if (epos > inode->i_size)
-				ext4_set_inode_flag(inode,
-						    EXT4_INODE_EOFBLOCKS);
 		}
 		ext4_mark_inode_dirty(handle, inode);
 		ext4_update_inode_fsync_trans(handle, inode, 1);
@@ -4802,16 +4575,8 @@ static long ext4_zero_range(struct file *file, loff_t offset,
 	}
 
 	inode->i_mtime = inode->i_ctime = current_time(inode);
-	if (new_size) {
+	if (new_size)
 		ext4_update_inode_size(inode, new_size);
-	} else {
-		/*
-		* Mark that we allocate beyond EOF so the subsequent truncate
-		* can proceed even if the new size is the same as i_size.
-		*/
-		if (offset + len > inode->i_size)
-			ext4_set_inode_flag(inode, EXT4_INODE_EOFBLOCKS);
-	}
 	ext4_mark_inode_dirty(handle, inode);
 
 	/* Zero out partial block at the edges of the range */
@@ -5009,64 +4774,13 @@ int ext4_convert_unwritten_io_end_vec(handle_t *handle, ext4_io_end_t *io_end)
 	return ret < 0 ? ret : err;
 }
 
-/*
- * If newes is not existing extent (newes->ec_pblk equals zero) find
- * delayed extent at start of newes and update newes accordingly and
- * return start of the next delayed extent.
- *
- * If newes is existing extent (newes->ec_pblk is not equal zero)
- * return start of next delayed extent or EXT_MAX_BLOCKS if no delayed
- * extent found. Leave newes unmodified.
- */
-static int ext4_find_delayed_extent(struct inode *inode,
-				    struct extent_status *newes)
-{
-	struct extent_status es;
-	ext4_lblk_t block, next_del;
-
-	if (newes->es_pblk == 0) {
-		ext4_es_find_extent_range(inode, &ext4_es_is_delayed,
-					  newes->es_lblk,
-					  newes->es_lblk + newes->es_len - 1,
-					  &es);
-
-		/*
-		 * No extent in extent-tree contains block @newes->es_pblk,
-		 * then the block may stay in 1)a hole or 2)delayed-extent.
-		 */
-		if (es.es_len == 0)
-			/* A hole found. */
-			return 0;
-
-		if (es.es_lblk > newes->es_lblk) {
-			/* A hole found. */
-			newes->es_len = min(es.es_lblk - newes->es_lblk,
-					    newes->es_len);
-			return 0;
-		}
-
-		newes->es_len = es.es_lblk + es.es_len - newes->es_lblk;
-	}
-
-	block = newes->es_lblk + newes->es_len;
-	ext4_es_find_extent_range(inode, &ext4_es_is_delayed, block,
-				  EXT_MAX_BLOCKS, &es);
-	if (es.es_len == 0)
-		next_del = EXT_MAX_BLOCKS;
-	else
-		next_del = es.es_lblk;
-
-	return next_del;
-}
-
-static int ext4_xattr_fiemap(struct inode *inode,
-				struct fiemap_extent_info *fieinfo)
+static int ext4_iomap_xattr_fiemap(struct inode *inode, struct iomap *iomap)
 {
 	__u64 physical = 0;
-	__u64 length;
-	__u32 flags = FIEMAP_EXTENT_LAST;
+	__u64 length = 0;
 	int blockbits = inode->i_sb->s_blocksize_bits;
 	int error = 0;
+	u16 iomap_type;
 
 	/* in-inode? */
 	if (ext4_test_inode_state(inode, EXT4_STATE_XATTR)) {
@@ -5081,41 +4795,50 @@ static int ext4_xattr_fiemap(struct inode *inode,
 				EXT4_I(inode)->i_extra_isize;
 		physical += offset;
 		length = EXT4_SB(inode->i_sb)->s_inode_size - offset;
-		flags |= FIEMAP_EXTENT_DATA_INLINE;
 		brelse(iloc.bh);
-	} else { /* external block */
+		iomap_type = IOMAP_INLINE;
+	} else if (EXT4_I(inode)->i_file_acl) { /* external block */
 		physical = (__u64)EXT4_I(inode)->i_file_acl << blockbits;
 		length = inode->i_sb->s_blocksize;
+		iomap_type = IOMAP_MAPPED;
+	} else {
+		/* no in-inode or external block for xattr, so return -ENOENT */
+		error = -ENOENT;
+		goto out;
 	}
 
-	if (physical)
-		error = fiemap_fill_next_extent(fieinfo, 0, physical,
-						length, flags);
-	return (error < 0 ? error : 0);
+	iomap->addr = physical;
+	iomap->offset = 0;
+	iomap->length = length;
+	iomap->type = iomap_type;
+	iomap->flags = 0;
+out:
+	return error;
 }
 
-static int _ext4_fiemap(struct inode *inode,
-			struct fiemap_extent_info *fieinfo,
-			__u64 start, __u64 len,
-			int (*fill)(struct inode *, ext4_lblk_t,
-				    ext4_lblk_t,
-				    struct fiemap_extent_info *))
+static int ext4_iomap_xattr_begin(struct inode *inode, loff_t offset,
+				  loff_t length, unsigned flags,
+				  struct iomap *iomap, struct iomap *srcmap)
+{
+	int error;
+
+	error = ext4_iomap_xattr_fiemap(inode, iomap);
+	if (error == 0 && (offset >= iomap->length))
+		error = -ENOENT;
+	return error;
+}
+
+static const struct iomap_ops ext4_iomap_xattr_ops = {
+	.iomap_begin		= ext4_iomap_xattr_begin,
+};
+
+static int _ext4_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
+			__u64 start, __u64 len, bool from_es_cache)
 {
 	ext4_lblk_t start_blk;
-	u32 ext4_fiemap_flags = FIEMAP_FLAG_SYNC|FIEMAP_FLAG_XATTR;
-
+	u32 ext4_fiemap_flags = FIEMAP_FLAG_SYNC | FIEMAP_FLAG_XATTR;
 	int error = 0;
 
-	if (ext4_has_inline_data(inode)) {
-		int has_inline = 1;
-
-		error = ext4_inline_data_fiemap(inode, fieinfo, &has_inline,
-						start, len);
-
-		if (has_inline)
-			return error;
-	}
-
 	if (fieinfo->fi_flags & FIEMAP_FLAG_CACHE) {
 		error = ext4_ext_precache(inode);
 		if (error)
@@ -5123,19 +4846,19 @@ static int _ext4_fiemap(struct inode *inode,
 		fieinfo->fi_flags &= ~FIEMAP_FLAG_CACHE;
 	}
 
-	/* fallback to generic here if not in extents fmt */
-	if (!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)) &&
-	    fill == ext4_fill_fiemap_extents)
-		return generic_block_fiemap(inode, fieinfo, start, len,
-			ext4_get_block);
-
-	if (fill == ext4_fill_es_cache_info)
+	if (from_es_cache)
 		ext4_fiemap_flags &= FIEMAP_FLAG_XATTR;
+
 	if (fiemap_check_flags(fieinfo, ext4_fiemap_flags))
 		return -EBADR;
 
 	if (fieinfo->fi_flags & FIEMAP_FLAG_XATTR) {
-		error = ext4_xattr_fiemap(inode, fieinfo);
+		fieinfo->fi_flags &= ~FIEMAP_FLAG_XATTR;
+		error = iomap_fiemap(inode, fieinfo, start, len,
+				     &ext4_iomap_xattr_ops);
+	} else if (!from_es_cache) {
+		error = iomap_fiemap(inode, fieinfo, start, len,
+				     &ext4_iomap_report_ops);
 	} else {
 		ext4_lblk_t len_blks;
 		__u64 last_blk;
@@ -5150,7 +4873,8 @@ static int _ext4_fiemap(struct inode *inode,
 		 * Walk the extent tree gathering extent information
 		 * and pushing extents back to the user.
 		 */
-		error = fill(inode, start_blk, len_blks, fieinfo);
+		error = ext4_fill_es_cache_info(inode, start_blk, len_blks,
+						fieinfo);
 	}
 	return error;
 }
@@ -5158,8 +4882,7 @@ static int _ext4_fiemap(struct inode *inode,
 int ext4_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
 		__u64 start, __u64 len)
 {
-	return _ext4_fiemap(inode, fieinfo, start, len,
-			    ext4_fill_fiemap_extents);
+	return _ext4_fiemap(inode, fieinfo, start, len, false);
 }
 
 int ext4_get_es_cache(struct inode *inode, struct fiemap_extent_info *fieinfo,
@@ -5175,8 +4898,7 @@ int ext4_get_es_cache(struct inode *inode, struct fiemap_extent_info *fieinfo,
 			return 0;
 	}
 
-	return _ext4_fiemap(inode, fieinfo, start, len,
-			    ext4_fill_es_cache_info);
+	return _ext4_fiemap(inode, fieinfo, start, len, true);
 }
 
 
diff --git a/fs/ext4/file.c b/fs/ext4/file.c
index 5f22588..0d62425 100644
--- a/fs/ext4/file.c
+++ b/fs/ext4/file.c
@@ -872,6 +872,7 @@ const struct file_operations ext4_file_operations = {
 	.llseek		= ext4_llseek,
 	.read_iter	= ext4_file_read_iter,
 	.write_iter	= ext4_file_write_iter,
+	.iopoll		= iomap_dio_iopoll,
 	.unlocked_ioctl = ext4_ioctl,
 #ifdef CONFIG_COMPAT
 	.compat_ioctl	= ext4_compat_ioctl,
diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c
index f95ee99..4b8c9a9 100644
--- a/fs/ext4/ialloc.c
+++ b/fs/ext4/ialloc.c
@@ -113,7 +113,7 @@ static int ext4_validate_inode_bitmap(struct super_block *sb,
  * Read the inode allocation bitmap for a given block_group, reading
  * into the specified slot in the superblock's bitmap cache.
  *
- * Return buffer_head of bitmap on success or NULL.
+ * Return buffer_head of bitmap on success, or an ERR_PTR on error.
  */
 static struct buffer_head *
 ext4_read_inode_bitmap(struct super_block *sb, ext4_group_t block_group)
@@ -196,10 +196,9 @@ ext4_read_inode_bitmap(struct super_block *sb, ext4_group_t block_group)
 	ext4_simulate_fail_bh(sb, bh, EXT4_SIM_IBITMAP_EIO);
 	if (!buffer_uptodate(bh)) {
 		put_bh(bh);
-		ext4_set_errno(sb, EIO);
-		ext4_error(sb, "Cannot read inode bitmap - "
-			   "block_group = %u, inode_bitmap = %llu",
-			   block_group, bitmap_blk);
+		ext4_error_err(sb, EIO, "Cannot read inode bitmap - "
+			       "block_group = %u, inode_bitmap = %llu",
+			       block_group, bitmap_blk);
 		ext4_mark_group_bitmap_corrupted(sb, block_group,
 				EXT4_GROUP_INFO_IBITMAP_CORRUPT);
 		return ERR_PTR(-EIO);
@@ -663,7 +662,7 @@ static int find_group_other(struct super_block *sb, struct inode *parent,
  * block has been written back to disk.  (Yes, these values are
  * somewhat arbitrary...)
  */
-#define RECENTCY_MIN	5
+#define RECENTCY_MIN	60
 #define RECENTCY_DIRTY	300
 
 static int recently_deleted(struct super_block *sb, ext4_group_t group, int ino)
@@ -712,21 +711,34 @@ static int recently_deleted(struct super_block *sb, ext4_group_t group, int ino)
 static int find_inode_bit(struct super_block *sb, ext4_group_t group,
 			  struct buffer_head *bitmap, unsigned long *ino)
 {
+	bool check_recently_deleted = EXT4_SB(sb)->s_journal == NULL;
+	unsigned long recently_deleted_ino = EXT4_INODES_PER_GROUP(sb);
+
 next:
 	*ino = ext4_find_next_zero_bit((unsigned long *)
 				       bitmap->b_data,
 				       EXT4_INODES_PER_GROUP(sb), *ino);
 	if (*ino >= EXT4_INODES_PER_GROUP(sb))
-		return 0;
+		goto not_found;
 
-	if ((EXT4_SB(sb)->s_journal == NULL) &&
-	    recently_deleted(sb, group, *ino)) {
+	if (check_recently_deleted && recently_deleted(sb, group, *ino)) {
+		recently_deleted_ino = *ino;
 		*ino = *ino + 1;
 		if (*ino < EXT4_INODES_PER_GROUP(sb))
 			goto next;
-		return 0;
+		goto not_found;
 	}
-
+	return 1;
+not_found:
+	if (recently_deleted_ino >= EXT4_INODES_PER_GROUP(sb))
+		return 0;
+	/*
+	 * Not reusing recently deleted inodes is mostly a preference. We don't
+	 * want to report ENOSPC or skew allocation patterns because of that.
+	 * So return even recently deleted inode if we could find better in the
+	 * given range.
+	 */
+	*ino = recently_deleted_ino;
 	return 1;
 }
 
@@ -1231,9 +1243,9 @@ struct inode *ext4_orphan_get(struct super_block *sb, unsigned long ino)
 	inode = ext4_iget(sb, ino, EXT4_IGET_NORMAL);
 	if (IS_ERR(inode)) {
 		err = PTR_ERR(inode);
-		ext4_set_errno(sb, -err);
-		ext4_error(sb, "couldn't read orphan inode %lu (err %d)",
-			   ino, err);
+		ext4_error_err(sb, -err,
+			       "couldn't read orphan inode %lu (err %d)",
+			       ino, err);
 		return inode;
 	}
 
diff --git a/fs/ext4/indirect.c b/fs/ext4/indirect.c
index 569fc68..107f004 100644
--- a/fs/ext4/indirect.c
+++ b/fs/ext4/indirect.c
@@ -1019,7 +1019,7 @@ static void ext4_free_branches(handle_t *handle, struct inode *inode,
 			 * (should be rare).
 			 */
 			if (!bh) {
-				EXT4_ERROR_INODE_BLOCK(inode, nr,
+				ext4_error_inode_block(inode, nr, EIO,
 						       "Read failure");
 				continue;
 			}
diff --git a/fs/ext4/inline.c b/fs/ext4/inline.c
index fad82d0..f35e289e 100644
--- a/fs/ext4/inline.c
+++ b/fs/ext4/inline.c
@@ -98,10 +98,9 @@ int ext4_get_max_inline_size(struct inode *inode)
 
 	error = ext4_get_inode_loc(inode, &iloc);
 	if (error) {
-		ext4_set_errno(inode->i_sb, -error);
-		ext4_error_inode(inode, __func__, __LINE__, 0,
-				 "can't get inode location %lu",
-				 inode->i_ino);
+		ext4_error_inode_err(inode, __func__, __LINE__, 0, -error,
+				     "can't get inode location %lu",
+				     inode->i_ino);
 		return 0;
 	}
 
@@ -1762,9 +1761,9 @@ bool empty_inline_dir(struct inode *dir, int *has_inline_data)
 
 	err = ext4_get_inode_loc(dir, &iloc);
 	if (err) {
-		ext4_set_errno(dir->i_sb, -err);
-		EXT4_ERROR_INODE(dir, "error %d getting inode %lu block",
-				 err, dir->i_ino);
+		EXT4_ERROR_INODE_ERR(dir, -err,
+				     "error %d getting inode %lu block",
+				     err, dir->i_ino);
 		return true;
 	}
 
@@ -1857,47 +1856,6 @@ int ext4_inline_data_iomap(struct inode *inode, struct iomap *iomap)
 	return error;
 }
 
-int ext4_inline_data_fiemap(struct inode *inode,
-			    struct fiemap_extent_info *fieinfo,
-			    int *has_inline, __u64 start, __u64 len)
-{
-	__u64 physical = 0;
-	__u64 inline_len;
-	__u32 flags = FIEMAP_EXTENT_DATA_INLINE | FIEMAP_EXTENT_NOT_ALIGNED |
-		FIEMAP_EXTENT_LAST;
-	int error = 0;
-	struct ext4_iloc iloc;
-
-	down_read(&EXT4_I(inode)->xattr_sem);
-	if (!ext4_has_inline_data(inode)) {
-		*has_inline = 0;
-		goto out;
-	}
-	inline_len = min_t(size_t, ext4_get_inline_size(inode),
-			   i_size_read(inode));
-	if (start >= inline_len)
-		goto out;
-	if (start + len < inline_len)
-		inline_len = start + len;
-	inline_len -= start;
-
-	error = ext4_get_inode_loc(inode, &iloc);
-	if (error)
-		goto out;
-
-	physical = (__u64)iloc.bh->b_blocknr << inode->i_sb->s_blocksize_bits;
-	physical += (char *)ext4_raw_inode(&iloc) - iloc.bh->b_data;
-	physical += offsetof(struct ext4_inode, i_block);
-
-	brelse(iloc.bh);
-out:
-	up_read(&EXT4_I(inode)->xattr_sem);
-	if (physical)
-		error = fiemap_fill_next_extent(fieinfo, start, physical,
-						inline_len, flags);
-	return (error < 0 ? error : 0);
-}
-
 int ext4_inline_data_truncate(struct inode *inode, int *has_inline)
 {
 	handle_t *handle;
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index fa0ff78..2a4aae6 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -269,10 +269,9 @@ void ext4_evict_inode(struct inode *inode)
 	if (inode->i_blocks) {
 		err = ext4_truncate(inode);
 		if (err) {
-			ext4_set_errno(inode->i_sb, -err);
-			ext4_error(inode->i_sb,
-				   "couldn't truncate inode %lu (err %d)",
-				   inode->i_ino, err);
+			ext4_error_err(inode->i_sb, -err,
+				       "couldn't truncate inode %lu (err %d)",
+				       inode->i_ino, err);
 			goto stop_handle;
 		}
 	}
@@ -1974,7 +1973,7 @@ static int ext4_writepage(struct page *page,
 	bool keep_towrite = false;
 
 	if (unlikely(ext4_forced_shutdown(EXT4_SB(inode->i_sb)))) {
-		ext4_invalidatepage(page, 0, PAGE_SIZE);
+		inode->i_mapping->a_ops->invalidatepage(page, 0, PAGE_SIZE);
 		unlock_page(page);
 		return -EIO;
 	}
@@ -2478,10 +2477,9 @@ static int mpage_map_and_submit_extent(handle_t *handle,
 		up_write(&EXT4_I(inode)->i_data_sem);
 		err2 = ext4_mark_inode_dirty(handle, inode);
 		if (err2) {
-			ext4_set_errno(inode->i_sb, -err2);
-			ext4_error(inode->i_sb,
-				   "Failed to mark inode %lu dirty",
-				   inode->i_ino);
+			ext4_error_err(inode->i_sb, -err2,
+				       "Failed to mark inode %lu dirty",
+				       inode->i_ino);
 		}
 		if (!err)
 			err = err2;
@@ -3212,7 +3210,7 @@ static sector_t ext4_bmap(struct address_space *mapping, sector_t block)
 			return 0;
 	}
 
-	return generic_block_bmap(mapping, block, ext4_get_block);
+	return iomap_bmap(mapping, block, &ext4_iomap_ops);
 }
 
 static int ext4_readpage(struct file *file, struct page *page)
@@ -3333,6 +3331,10 @@ static void ext4_set_iomap(struct inode *inode, struct iomap *iomap,
 	iomap->offset = (u64) map->m_lblk << blkbits;
 	iomap->length = (u64) map->m_len << blkbits;
 
+	if ((map->m_flags & EXT4_MAP_MAPPED) &&
+	    !ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))
+		iomap->flags |= IOMAP_F_MERGED;
+
 	/*
 	 * Flags passed to ext4_map_blocks() for direct I/O writes can result
 	 * in m_flags having both EXT4_MAP_MAPPED and EXT4_MAP_UNWRITTEN bits
@@ -3542,12 +3544,28 @@ static int ext4_iomap_begin_report(struct inode *inode, loff_t offset,
 	map.m_len = min_t(loff_t, (offset + length - 1) >> blkbits,
 			  EXT4_MAX_LOGICAL_BLOCK) - map.m_lblk + 1;
 
+	/*
+	 * Fiemap callers may call for offset beyond s_bitmap_maxbytes.
+	 * So handle it here itself instead of querying ext4_map_blocks().
+	 * Since ext4_map_blocks() will warn about it and will return
+	 * -EIO error.
+	 */
+	if (!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))) {
+		struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
+
+		if (offset >= sbi->s_bitmap_maxbytes) {
+			map.m_flags = 0;
+			goto set_iomap;
+		}
+	}
+
 	ret = ext4_map_blocks(NULL, inode, &map, 0);
 	if (ret < 0)
 		return ret;
 	if (ret == 0)
 		delalloc = ext4_iomap_is_delalloc(inode, &map);
 
+set_iomap:
 	ext4_set_iomap(inode, iomap, &map, offset, length);
 	if (delalloc && iomap->type == IOMAP_HOLE)
 		iomap->type = IOMAP_DELALLOC;
@@ -4144,8 +4162,6 @@ int ext4_truncate(struct inode *inode)
 	if (!ext4_can_truncate(inode))
 		return 0;
 
-	ext4_clear_inode_flag(inode, EXT4_INODE_EOFBLOCKS);
-
 	if (inode->i_size == 0 && !test_opt(inode->i_sb, NO_AUTO_DA_ALLOC))
 		ext4_set_inode_state(inode, EXT4_STATE_DA_ALLOC_CLOSE);
 
@@ -4348,7 +4364,7 @@ static int __ext4_get_inode_loc(struct inode *inode,
 			if (end > table)
 				end = table;
 			while (b <= end)
-				sb_breadahead(sb, b++);
+				sb_breadahead_unmovable(sb, b++);
 		}
 
 		/*
@@ -4364,8 +4380,7 @@ static int __ext4_get_inode_loc(struct inode *inode,
 		wait_on_buffer(bh);
 		if (!buffer_uptodate(bh)) {
 		simulate_eio:
-			ext4_set_errno(inode->i_sb, EIO);
-			EXT4_ERROR_INODE_BLOCK(inode, block,
+			ext4_error_inode_block(inode, block, EIO,
 					       "unable to read itable block");
 			brelse(bh);
 			return -EIO;
@@ -4517,7 +4532,7 @@ struct inode *__ext4_iget(struct super_block *sb, unsigned long ino,
 	    (ino > le32_to_cpu(EXT4_SB(sb)->s_es->s_inodes_count))) {
 		if (flags & EXT4_IGET_HANDLE)
 			return ERR_PTR(-ESTALE);
-		__ext4_error(sb, function, line,
+		__ext4_error(sb, function, line, EFSCORRUPTED, 0,
 			     "inode #%lu: comm %s: iget: illegal inode #",
 			     ino, current->comm);
 		return ERR_PTR(-EFSCORRUPTED);
@@ -4580,9 +4595,8 @@ struct inode *__ext4_iget(struct super_block *sb, unsigned long ino,
 
 	if (!ext4_inode_csum_verify(inode, raw_inode, ei) ||
 	    ext4_simulate_fail(sb, EXT4_SIM_INODE_CRC)) {
-		ext4_set_errno(inode->i_sb, EFSBADCRC);
-		ext4_error_inode(inode, function, line, 0,
-				 "iget: checksum invalid");
+		ext4_error_inode_err(inode, function, line, 0, EFSBADCRC,
+				     "iget: checksum invalid");
 		ret = -EFSBADCRC;
 		goto bad_inode;
 	}
@@ -4812,7 +4826,7 @@ static int ext4_inode_blocks_set(handle_t *handle,
 				struct ext4_inode_info *ei)
 {
 	struct inode *inode = &(ei->vfs_inode);
-	u64 i_blocks = inode->i_blocks;
+	u64 i_blocks = READ_ONCE(inode->i_blocks);
 	struct super_block *sb = inode->i_sb;
 
 	if (i_blocks <= ~0U) {
@@ -4982,7 +4996,7 @@ static int ext4_do_update_inode(handle_t *handle,
 		raw_inode->i_file_acl_high =
 			cpu_to_le16(ei->i_file_acl >> 32);
 	raw_inode->i_file_acl_lo = cpu_to_le32(ei->i_file_acl);
-	if (ei->i_disksize != ext4_isize(inode->i_sb, raw_inode)) {
+	if (READ_ONCE(ei->i_disksize) != ext4_isize(inode->i_sb, raw_inode)) {
 		ext4_isize_set(raw_inode, ei->i_disksize);
 		need_datasync = 1;
 	}
@@ -5131,9 +5145,8 @@ int ext4_write_inode(struct inode *inode, struct writeback_control *wbc)
 		if (wbc->sync_mode == WB_SYNC_ALL && !wbc->for_sync)
 			sync_dirty_buffer(iloc.bh);
 		if (buffer_req(iloc.bh) && !buffer_uptodate(iloc.bh)) {
-			ext4_set_errno(inode->i_sb, EIO);
-			EXT4_ERROR_INODE_BLOCK(inode, iloc.bh->b_blocknr,
-					 "IO error syncing inode");
+			ext4_error_inode_block(inode, iloc.bh->b_blocknr, EIO,
+					       "IO error syncing inode");
 			err = -EIO;
 		}
 		brelse(iloc.bh);
diff --git a/fs/ext4/ioctl.c b/fs/ext4/ioctl.c
index 0c1d172..bfc1281 100644
--- a/fs/ext4/ioctl.c
+++ b/fs/ext4/ioctl.c
@@ -327,18 +327,6 @@ static int ext4_ioctl_setflags(struct inode *inode,
 	if ((flags ^ oldflags) & EXT4_EXTENTS_FL)
 		migrate = 1;
 
-	if (flags & EXT4_EOFBLOCKS_FL) {
-		/* we don't support adding EOFBLOCKS flag */
-		if (!(oldflags & EXT4_EOFBLOCKS_FL)) {
-			err = -EOPNOTSUPP;
-			goto flags_out;
-		}
-	} else if (oldflags & EXT4_EOFBLOCKS_FL) {
-		err = ext4_truncate(inode);
-		if (err)
-			goto flags_out;
-	}
-
 	if ((flags ^ oldflags) & EXT4_CASEFOLD_FL) {
 		if (!ext4_has_feature_casefold(sb)) {
 			err = -EOPNOTSUPP;
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index 51a78eb..30d5d97 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -1901,8 +1901,15 @@ void ext4_mb_simple_scan_group(struct ext4_allocation_context *ac,
 		BUG_ON(buddy == NULL);
 
 		k = mb_find_next_zero_bit(buddy, max, 0);
-		BUG_ON(k >= max);
-
+		if (k >= max) {
+			ext4_grp_locked_error(ac->ac_sb, e4b->bd_group, 0, 0,
+				"%d free clusters of order %d. But found 0",
+				grp->bb_counters[i], i);
+			ext4_mark_group_bitmap_corrupted(ac->ac_sb,
+					 e4b->bd_group,
+					EXT4_GROUP_INFO_BBITMAP_CORRUPT);
+			break;
+		}
 		ac->ac_found++;
 
 		ac->ac_b_ex.fe_len = 1 << i;
@@ -1936,7 +1943,8 @@ void ext4_mb_complex_scan_group(struct ext4_allocation_context *ac,
 	int free;
 
 	free = e4b->bd_info->bb_free;
-	BUG_ON(free <= 0);
+	if (WARN_ON(free <= 0))
+		return;
 
 	i = e4b->bd_info->bb_first_free;
 
@@ -1959,7 +1967,8 @@ void ext4_mb_complex_scan_group(struct ext4_allocation_context *ac,
 		}
 
 		mb_find_extent(e4b, i, ac->ac_g_ex.fe_len, &ex);
-		BUG_ON(ex.fe_len <= 0);
+		if (WARN_ON(ex.fe_len <= 0))
+			break;
 		if (free < ex.fe_len) {
 			ext4_grp_locked_error(sb, e4b->bd_group, 0, 0,
 					"%d free clusters as per "
@@ -3914,9 +3923,9 @@ ext4_mb_discard_group_preallocations(struct super_block *sb,
 	bitmap_bh = ext4_read_block_bitmap(sb, group);
 	if (IS_ERR(bitmap_bh)) {
 		err = PTR_ERR(bitmap_bh);
-		ext4_set_errno(sb, -err);
-		ext4_error(sb, "Error %d reading block bitmap for %u",
-			   err, group);
+		ext4_error_err(sb, -err,
+			       "Error %d reading block bitmap for %u",
+			       err, group);
 		return 0;
 	}
 
@@ -4083,18 +4092,16 @@ void ext4_discard_preallocations(struct inode *inode)
 		err = ext4_mb_load_buddy_gfp(sb, group, &e4b,
 					     GFP_NOFS|__GFP_NOFAIL);
 		if (err) {
-			ext4_set_errno(sb, -err);
-			ext4_error(sb, "Error %d loading buddy information for %u",
-				   err, group);
+			ext4_error_err(sb, -err, "Error %d loading buddy information for %u",
+				       err, group);
 			continue;
 		}
 
 		bitmap_bh = ext4_read_block_bitmap(sb, group);
 		if (IS_ERR(bitmap_bh)) {
 			err = PTR_ERR(bitmap_bh);
-			ext4_set_errno(sb, -err);
-			ext4_error(sb, "Error %d reading block bitmap for %u",
-					err, group);
+			ext4_error_err(sb, -err, "Error %d reading block bitmap for %u",
+				       err, group);
 			ext4_mb_unload_buddy(&e4b);
 			continue;
 		}
@@ -4302,7 +4309,8 @@ ext4_mb_discard_lg_preallocations(struct super_block *sb,
 
 	spin_lock(&lg->lg_prealloc_lock);
 	list_for_each_entry_rcu(pa, &lg->lg_prealloc_list[order],
-						pa_inode_list) {
+				pa_inode_list,
+				lockdep_is_held(&lg->lg_prealloc_lock)) {
 		spin_lock(&pa->pa_lock);
 		if (atomic_read(&pa->pa_count)) {
 			/*
@@ -4347,9 +4355,8 @@ ext4_mb_discard_lg_preallocations(struct super_block *sb,
 		err = ext4_mb_load_buddy_gfp(sb, group, &e4b,
 					     GFP_NOFS|__GFP_NOFAIL);
 		if (err) {
-			ext4_set_errno(sb, -err);
-			ext4_error(sb, "Error %d loading buddy information for %u",
-				   err, group);
+			ext4_error_err(sb, -err, "Error %d loading buddy information for %u",
+				       err, group);
 			continue;
 		}
 		ext4_lock_group(sb, group);
@@ -4386,7 +4393,8 @@ static void ext4_mb_add_n_trim(struct ext4_allocation_context *ac)
 	/* Add the prealloc space to lg */
 	spin_lock(&lg->lg_prealloc_lock);
 	list_for_each_entry_rcu(tmp_pa, &lg->lg_prealloc_list[order],
-						pa_inode_list) {
+				pa_inode_list,
+				lockdep_is_held(&lg->lg_prealloc_lock)) {
 		spin_lock(&tmp_pa->pa_lock);
 		if (tmp_pa->pa_deleted) {
 			spin_unlock(&tmp_pa->pa_lock);
diff --git a/fs/ext4/mmp.c b/fs/ext4/mmp.c
index 87f7551..d34cb8c 100644
--- a/fs/ext4/mmp.c
+++ b/fs/ext4/mmp.c
@@ -175,8 +175,8 @@ static int kmmpd(void *data)
 		 */
 		if (retval) {
 			if ((failed_writes % 60) == 0) {
-				ext4_set_errno(sb, -retval);
-				ext4_error(sb, "Error writing to MMP block");
+				ext4_error_err(sb, -retval,
+					       "Error writing to MMP block");
 			}
 			failed_writes++;
 		}
@@ -208,9 +208,9 @@ static int kmmpd(void *data)
 
 			retval = read_mmp_block(sb, &bh_check, mmp_block);
 			if (retval) {
-				ext4_set_errno(sb, -retval);
-				ext4_error(sb, "error reading MMP data: %d",
-					   retval);
+				ext4_error_err(sb, -retval,
+					       "error reading MMP data: %d",
+					       retval);
 				goto exit_thread;
 			}
 
@@ -222,8 +222,7 @@ static int kmmpd(void *data)
 					     "Error while updating MMP info. "
 					     "The filesystem seems to have been"
 					     " multiply mounted.");
-				ext4_set_errno(sb, EBUSY);
-				ext4_error(sb, "abort");
+				ext4_error_err(sb, EBUSY, "abort");
 				put_bh(bh_check);
 				retval = -EBUSY;
 				goto exit_thread;
diff --git a/fs/ext4/move_extent.c b/fs/ext4/move_extent.c
index 30ce3dc..1ed86fb 100644
--- a/fs/ext4/move_extent.c
+++ b/fs/ext4/move_extent.c
@@ -422,8 +422,8 @@ move_extent_per_page(struct file *o_filp, struct inode *donor_inode,
 					   block_len_in_page, 0, &err2);
 	ext4_double_up_write_data_sem(orig_inode, donor_inode);
 	if (replaced_count != block_len_in_page) {
-		EXT4_ERROR_INODE_BLOCK(orig_inode, (sector_t)(orig_blk_offset),
-				       "Unable to copy data block,"
+		ext4_error_inode_block(orig_inode, (sector_t)(orig_blk_offset),
+				       EIO, "Unable to copy data block,"
 				       " data will be lost.");
 		*err = -EIO;
 	}
diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c
index b05ea72..a8aca47 100644
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -160,9 +160,9 @@ static struct buffer_head *__ext4_read_dirblock(struct inode *inode,
 		    !ext4_simulate_fail(inode->i_sb, EXT4_SIM_DIRBLOCK_CRC))
 			set_buffer_verified(bh);
 		else {
-			ext4_set_errno(inode->i_sb, EFSBADCRC);
-			ext4_error_inode(inode, func, line, block,
-					 "Directory index failed checksum");
+			ext4_error_inode_err(inode, func, line, block,
+					     EFSBADCRC,
+					     "Directory index failed checksum");
 			brelse(bh);
 			return ERR_PTR(-EFSBADCRC);
 		}
@@ -172,9 +172,9 @@ static struct buffer_head *__ext4_read_dirblock(struct inode *inode,
 		    !ext4_simulate_fail(inode->i_sb, EXT4_SIM_DIRBLOCK_CRC))
 			set_buffer_verified(bh);
 		else {
-			ext4_set_errno(inode->i_sb, EFSBADCRC);
-			ext4_error_inode(inode, func, line, block,
-					 "Directory block failed checksum");
+			ext4_error_inode_err(inode, func, line, block,
+					     EFSBADCRC,
+					     "Directory block failed checksum");
 			brelse(bh);
 			return ERR_PTR(-EFSBADCRC);
 		}
@@ -233,13 +233,13 @@ struct dx_root
 		u8 unused_flags;
 	}
 	info;
-	struct dx_entry	entries[0];
+	struct dx_entry	entries[];
 };
 
 struct dx_node
 {
 	struct fake_dirent fake;
-	struct dx_entry	entries[0];
+	struct dx_entry	entries[];
 };
 
 
@@ -1532,9 +1532,9 @@ static struct buffer_head *__ext4_find_entry(struct inode *dir,
 			goto next;
 		wait_on_buffer(bh);
 		if (!buffer_uptodate(bh)) {
-			ext4_set_errno(sb, EIO);
-			EXT4_ERROR_INODE(dir, "reading directory lblock %lu",
-					 (unsigned long) block);
+			EXT4_ERROR_INODE_ERR(dir, EIO,
+					     "reading directory lblock %lu",
+					     (unsigned long) block);
 			brelse(bh);
 			ret = ERR_PTR(-EIO);
 			goto cleanup_and_exit;
@@ -1543,9 +1543,9 @@ static struct buffer_head *__ext4_find_entry(struct inode *dir,
 		    !is_dx_internal_node(dir, block,
 					 (struct ext4_dir_entry *)bh->b_data) &&
 		    !ext4_dirblock_csum_verify(dir, bh)) {
-			ext4_set_errno(sb, EFSBADCRC);
-			EXT4_ERROR_INODE(dir, "checksumming directory "
-					 "block %lu", (unsigned long)block);
+			EXT4_ERROR_INODE_ERR(dir, EFSBADCRC,
+					     "checksumming directory "
+					     "block %lu", (unsigned long)block);
 			brelse(bh);
 			ret = ERR_PTR(-EFSBADCRC);
 			goto cleanup_and_exit;
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index c8dff4c..bf5fcb4 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -335,10 +335,12 @@ static time64_t __ext4_get_tstamp(__le32 *lo, __u8 *hi)
 #define ext4_get_tstamp(es, tstamp) \
 	__ext4_get_tstamp(&(es)->tstamp, &(es)->tstamp ## _hi)
 
-static void __save_error_info(struct super_block *sb, const char *func,
-			    unsigned int line)
+static void __save_error_info(struct super_block *sb, int error,
+			      __u32 ino, __u64 block,
+			      const char *func, unsigned int line)
 {
 	struct ext4_super_block *es = EXT4_SB(sb)->s_es;
+	int err;
 
 	EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS;
 	if (bdev_read_only(sb->s_bdev))
@@ -347,8 +349,62 @@ static void __save_error_info(struct super_block *sb, const char *func,
 	ext4_update_tstamp(es, s_last_error_time);
 	strncpy(es->s_last_error_func, func, sizeof(es->s_last_error_func));
 	es->s_last_error_line = cpu_to_le32(line);
-	if (es->s_last_error_errcode == 0)
-		es->s_last_error_errcode = EXT4_ERR_EFSCORRUPTED;
+	es->s_last_error_ino = cpu_to_le32(ino);
+	es->s_last_error_block = cpu_to_le64(block);
+	switch (error) {
+	case EIO:
+		err = EXT4_ERR_EIO;
+		break;
+	case ENOMEM:
+		err = EXT4_ERR_ENOMEM;
+		break;
+	case EFSBADCRC:
+		err = EXT4_ERR_EFSBADCRC;
+		break;
+	case 0:
+	case EFSCORRUPTED:
+		err = EXT4_ERR_EFSCORRUPTED;
+		break;
+	case ENOSPC:
+		err = EXT4_ERR_ENOSPC;
+		break;
+	case ENOKEY:
+		err = EXT4_ERR_ENOKEY;
+		break;
+	case EROFS:
+		err = EXT4_ERR_EROFS;
+		break;
+	case EFBIG:
+		err = EXT4_ERR_EFBIG;
+		break;
+	case EEXIST:
+		err = EXT4_ERR_EEXIST;
+		break;
+	case ERANGE:
+		err = EXT4_ERR_ERANGE;
+		break;
+	case EOVERFLOW:
+		err = EXT4_ERR_EOVERFLOW;
+		break;
+	case EBUSY:
+		err = EXT4_ERR_EBUSY;
+		break;
+	case ENOTDIR:
+		err = EXT4_ERR_ENOTDIR;
+		break;
+	case ENOTEMPTY:
+		err = EXT4_ERR_ENOTEMPTY;
+		break;
+	case ESHUTDOWN:
+		err = EXT4_ERR_ESHUTDOWN;
+		break;
+	case EFAULT:
+		err = EXT4_ERR_EFAULT;
+		break;
+	default:
+		err = EXT4_ERR_UNKNOWN;
+	}
+	es->s_last_error_errcode = err;
 	if (!es->s_first_error_time) {
 		es->s_first_error_time = es->s_last_error_time;
 		es->s_first_error_time_hi = es->s_last_error_time_hi;
@@ -368,11 +424,13 @@ static void __save_error_info(struct super_block *sb, const char *func,
 	le32_add_cpu(&es->s_error_count, 1);
 }
 
-static void save_error_info(struct super_block *sb, const char *func,
-			    unsigned int line)
+static void save_error_info(struct super_block *sb, int error,
+			    __u32 ino, __u64 block,
+			    const char *func, unsigned int line)
 {
-	__save_error_info(sb, func, line);
-	ext4_commit_super(sb, 1);
+	__save_error_info(sb, error, ino, block, func, line);
+	if (!bdev_read_only(sb->s_bdev))
+		ext4_commit_super(sb, 1);
 }
 
 /*
@@ -477,7 +535,8 @@ static void ext4_handle_error(struct super_block *sb)
 			     "EXT4-fs error")
 
 void __ext4_error(struct super_block *sb, const char *function,
-		  unsigned int line, const char *fmt, ...)
+		  unsigned int line, int error, __u64 block,
+		  const char *fmt, ...)
 {
 	struct va_format vaf;
 	va_list args;
@@ -495,24 +554,21 @@ void __ext4_error(struct super_block *sb, const char *function,
 		       sb->s_id, function, line, current->comm, &vaf);
 		va_end(args);
 	}
-	save_error_info(sb, function, line);
+	save_error_info(sb, error, 0, block, function, line);
 	ext4_handle_error(sb);
 }
 
 void __ext4_error_inode(struct inode *inode, const char *function,
-			unsigned int line, ext4_fsblk_t block,
+			unsigned int line, ext4_fsblk_t block, int error,
 			const char *fmt, ...)
 {
 	va_list args;
 	struct va_format vaf;
-	struct ext4_super_block *es = EXT4_SB(inode->i_sb)->s_es;
 
 	if (unlikely(ext4_forced_shutdown(EXT4_SB(inode->i_sb))))
 		return;
 
 	trace_ext4_error(inode->i_sb, function, line);
-	es->s_last_error_ino = cpu_to_le32(inode->i_ino);
-	es->s_last_error_block = cpu_to_le64(block);
 	if (ext4_error_ratelimit(inode->i_sb)) {
 		va_start(args, fmt);
 		vaf.fmt = fmt;
@@ -529,7 +585,8 @@ void __ext4_error_inode(struct inode *inode, const char *function,
 			       current->comm, &vaf);
 		va_end(args);
 	}
-	save_error_info(inode->i_sb, function, line);
+	save_error_info(inode->i_sb, error, inode->i_ino, block,
+			function, line);
 	ext4_handle_error(inode->i_sb);
 }
 
@@ -539,7 +596,6 @@ void __ext4_error_file(struct file *file, const char *function,
 {
 	va_list args;
 	struct va_format vaf;
-	struct ext4_super_block *es;
 	struct inode *inode = file_inode(file);
 	char pathname[80], *path;
 
@@ -547,8 +603,6 @@ void __ext4_error_file(struct file *file, const char *function,
 		return;
 
 	trace_ext4_error(inode->i_sb, function, line);
-	es = EXT4_SB(inode->i_sb)->s_es;
-	es->s_last_error_ino = cpu_to_le32(inode->i_ino);
 	if (ext4_error_ratelimit(inode->i_sb)) {
 		path = file_path(file, pathname, sizeof(pathname));
 		if (IS_ERR(path))
@@ -570,7 +624,8 @@ void __ext4_error_file(struct file *file, const char *function,
 			       current->comm, path, &vaf);
 		va_end(args);
 	}
-	save_error_info(inode->i_sb, function, line);
+	save_error_info(inode->i_sb, EFSCORRUPTED, inode->i_ino, block,
+			function, line);
 	ext4_handle_error(inode->i_sb);
 }
 
@@ -614,66 +669,6 @@ const char *ext4_decode_error(struct super_block *sb, int errno,
 	return errstr;
 }
 
-void ext4_set_errno(struct super_block *sb, int err)
-{
-	if (err < 0)
-		err = -err;
-
-	switch (err) {
-	case EIO:
-		err = EXT4_ERR_EIO;
-		break;
-	case ENOMEM:
-		err = EXT4_ERR_ENOMEM;
-		break;
-	case EFSBADCRC:
-		err = EXT4_ERR_EFSBADCRC;
-		break;
-	case EFSCORRUPTED:
-		err = EXT4_ERR_EFSCORRUPTED;
-		break;
-	case ENOSPC:
-		err = EXT4_ERR_ENOSPC;
-		break;
-	case ENOKEY:
-		err = EXT4_ERR_ENOKEY;
-		break;
-	case EROFS:
-		err = EXT4_ERR_EROFS;
-		break;
-	case EFBIG:
-		err = EXT4_ERR_EFBIG;
-		break;
-	case EEXIST:
-		err = EXT4_ERR_EEXIST;
-		break;
-	case ERANGE:
-		err = EXT4_ERR_ERANGE;
-		break;
-	case EOVERFLOW:
-		err = EXT4_ERR_EOVERFLOW;
-		break;
-	case EBUSY:
-		err = EXT4_ERR_EBUSY;
-		break;
-	case ENOTDIR:
-		err = EXT4_ERR_ENOTDIR;
-		break;
-	case ENOTEMPTY:
-		err = EXT4_ERR_ENOTEMPTY;
-		break;
-	case ESHUTDOWN:
-		err = EXT4_ERR_ESHUTDOWN;
-		break;
-	case EFAULT:
-		err = EXT4_ERR_EFAULT;
-		break;
-	default:
-		err = EXT4_ERR_UNKNOWN;
-	}
-	EXT4_SB(sb)->s_es->s_last_error_errcode = err;
-}
-
 /* __ext4_std_error decodes expected errors from journaling functions
  * automatically and invokes the appropriate error response.  */
 
@@ -698,8 +693,7 @@ void __ext4_std_error(struct super_block *sb, const char *function,
 		       sb->s_id, function, line, errstr);
 	}
 
-	ext4_set_errno(sb, -errno);
-	save_error_info(sb, function, line);
+	save_error_info(sb, -errno, 0, 0, function, line);
 	ext4_handle_error(sb);
 }
 
@@ -714,7 +708,7 @@ void __ext4_std_error(struct super_block *sb, const char *function,
  */
 
 void __ext4_abort(struct super_block *sb, const char *function,
-		unsigned int line, const char *fmt, ...)
+		  unsigned int line, int error, const char *fmt, ...)
 {
 	struct va_format vaf;
 	va_list args;
@@ -722,7 +716,7 @@ void __ext4_abort(struct super_block *sb, const char *function,
 	if (unlikely(ext4_forced_shutdown(EXT4_SB(sb))))
 		return;
 
-	save_error_info(sb, function, line);
+	save_error_info(sb, error, 0, 0, function, line);
 	va_start(args, fmt);
 	vaf.fmt = fmt;
 	vaf.va = &args;
@@ -741,7 +735,6 @@ void __ext4_abort(struct super_block *sb, const char *function,
 		sb->s_flags |= SB_RDONLY;
 		if (EXT4_SB(sb)->s_journal)
 			jbd2_journal_abort(EXT4_SB(sb)->s_journal, -EIO);
-		save_error_info(sb, function, line);
 	}
 	if (test_opt(sb, ERRORS_PANIC) && !system_going_down()) {
 		if (EXT4_SB(sb)->s_journal &&
@@ -815,15 +808,12 @@ __acquires(bitlock)
 {
 	struct va_format vaf;
 	va_list args;
-	struct ext4_super_block *es = EXT4_SB(sb)->s_es;
 
 	if (unlikely(ext4_forced_shutdown(EXT4_SB(sb))))
 		return;
 
 	trace_ext4_error(sb, function, line);
-	es->s_last_error_ino = cpu_to_le32(ino);
-	es->s_last_error_block = cpu_to_le64(block);
-	__save_error_info(sb, function, line);
+	__save_error_info(sb, EFSCORRUPTED, ino, block, function, line);
 
 	if (ext4_error_ratelimit(sb)) {
 		va_start(args, fmt);
@@ -1024,17 +1014,22 @@ static void ext4_put_super(struct super_block *sb)
 
 	destroy_workqueue(sbi->rsv_conversion_wq);
 
+	/*
+	 * Unregister sysfs before destroying jbd2 journal.
+	 * Since we could still access attr_journal_task attribute via sysfs
+	 * path which could have sbi->s_journal->j_task as NULL
+	 */
+	ext4_unregister_sysfs(sb);
+
 	if (sbi->s_journal) {
 		aborted = is_journal_aborted(sbi->s_journal);
 		err = jbd2_journal_destroy(sbi->s_journal);
 		sbi->s_journal = NULL;
 		if ((err < 0) && !aborted) {
-			ext4_set_errno(sb, -err);
-			ext4_abort(sb, "Couldn't clean up the journal");
+			ext4_abort(sb, -err, "Couldn't clean up the journal");
 		}
 	}
 
-	ext4_unregister_sysfs(sb);
 	ext4_es_unregister_shrinker(sbi);
 	del_timer_sync(&sbi->s_err_report);
 	ext4_release_system_zone(sb);
@@ -2180,6 +2175,14 @@ static int parse_options(char *options, struct super_block *sb,
 		}
 	}
 #endif
+	if (test_opt(sb, DIOREAD_NOLOCK)) {
+		int blocksize =
+			BLOCK_SIZE << le32_to_cpu(sbi->s_es->s_log_block_size);
+		if (blocksize < PAGE_SIZE)
+			ext4_msg(sb, KERN_WARNING, "Warning: mounting with an "
+				 "experimental mount option 'dioread_nolock' "
+				 "for blocksize < PAGE_SIZE");
+	}
 	return 1;
 }
 
@@ -3609,7 +3612,8 @@ int ext4_calculate_overhead(struct super_block *sb)
 	 */
 	if (sbi->s_journal && !sbi->journal_bdev)
 		overhead += EXT4_NUM_B2C(sbi, sbi->s_journal->j_maxlen);
-	else if (ext4_has_feature_journal(sb) && !sbi->s_journal) {
+	else if (ext4_has_feature_journal(sb) && !sbi->s_journal && j_inum) {
+		/* j_inum for internal journal is non-zero */
 		j_inode = ext4_get_journal_inode(sb, j_inum);
 		if (j_inode) {
 			j_blocks = j_inode->i_size >> sb->s_blocksize_bits;
@@ -3785,7 +3789,6 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 		set_opt(sb, NO_UID32);
 	/* xattr user namespace & acls are now defaulted on */
 	set_opt(sb, XATTR_USER);
-	set_opt(sb, DIOREAD_NOLOCK);
 #ifdef CONFIG_EXT4_FS_POSIX_ACL
 	set_opt(sb, POSIX_ACL);
 #endif
@@ -3835,6 +3838,10 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 	sbi->s_li_wait_mult = EXT4_DEF_LI_WAIT_MULT;
 
 	blocksize = BLOCK_SIZE << le32_to_cpu(es->s_log_block_size);
+
+	if (blocksize == PAGE_SIZE)
+		set_opt(sb, DIOREAD_NOLOCK);
+
 	if (blocksize < EXT4_MIN_BLOCK_SIZE ||
 	    blocksize > EXT4_MAX_BLOCK_SIZE) {
 		ext4_msg(sb, KERN_ERR,
@@ -4157,7 +4164,7 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 	if (sbi->s_inodes_per_group < sbi->s_inodes_per_block ||
 	    sbi->s_inodes_per_group > blocksize * 8) {
 		ext4_msg(sb, KERN_ERR, "invalid inodes per group: %lu\n",
-			 sbi->s_blocks_per_group);
+			 sbi->s_inodes_per_group);
 		goto failed_mount;
 	}
 	sbi->s_itb_per_group = sbi->s_inodes_per_group /
@@ -4286,9 +4293,9 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 			EXT4_BLOCKS_PER_GROUP(sb) - 1);
 	do_div(blocks_count, EXT4_BLOCKS_PER_GROUP(sb));
 	if (blocks_count > ((uint64_t)1<<32) - EXT4_DESC_PER_BLOCK(sb)) {
-		ext4_msg(sb, KERN_WARNING, "groups count too large: %u "
+		ext4_msg(sb, KERN_WARNING, "groups count too large: %llu "
 		       "(block count %llu, first data block %u, "
-		       "blocks per group %lu)", sbi->s_groups_count,
+		       "blocks per group %lu)", blocks_count,
 		       ext4_blocks_count(es),
 		       le32_to_cpu(es->s_first_data_block),
 		       EXT4_BLOCKS_PER_GROUP(sb));
@@ -4331,7 +4338,7 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 	/* Pre-read the descriptors into the buffer cache */
 	for (i = 0; i < db_count; i++) {
 		block = descriptor_loc(sb, logical_sb_block, i);
-		sb_breadahead(sb, block);
+		sb_breadahead_unmovable(sb, block);
 	}
 
 	for (i = 0; i < db_count; i++) {
@@ -5433,7 +5440,7 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data)
 	}
 
 	if (sbi->s_mount_flags & EXT4_MF_FS_ABORTED)
-		ext4_abort(sb, "Abort forced by user");
+		ext4_abort(sb, EXT4_ERR_ESHUTDOWN, "Abort forced by user");
 
 	sb->s_flags = (sb->s_flags & ~SB_POSIXACL) |
 		(test_opt(sb, POSIX_ACL) ? SB_POSIXACL : 0);
@@ -5622,10 +5629,8 @@ static int ext4_statfs_project(struct super_block *sb,
 		return PTR_ERR(dquot);
 	spin_lock(&dquot->dq_dqb_lock);
 
-	limit = dquot->dq_dqb.dqb_bsoftlimit;
-	if (dquot->dq_dqb.dqb_bhardlimit &&
-	    (!limit || dquot->dq_dqb.dqb_bhardlimit < limit))
-		limit = dquot->dq_dqb.dqb_bhardlimit;
+	limit = min_not_zero(dquot->dq_dqb.dqb_bsoftlimit,
+			     dquot->dq_dqb.dqb_bhardlimit);
 	limit >>= sb->s_blocksize_bits;
 
 	if (limit && buf->f_blocks > limit) {
@@ -5637,11 +5642,8 @@ static int ext4_statfs_project(struct super_block *sb,
 			 (buf->f_blocks - curblock) : 0;
 	}
 
-	limit = dquot->dq_dqb.dqb_isoftlimit;
-	if (dquot->dq_dqb.dqb_ihardlimit &&
-	    (!limit || dquot->dq_dqb.dqb_ihardlimit < limit))
-		limit = dquot->dq_dqb.dqb_ihardlimit;
-
+	limit = min_not_zero(dquot->dq_dqb.dqb_isoftlimit,
+			     dquot->dq_dqb.dqb_ihardlimit);
 	if (limit && buf->f_files > limit) {
 		buf->f_files = limit;
 		buf->f_ffree =
diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c
index 8cac7d9..21df43a 100644
--- a/fs/ext4/xattr.c
+++ b/fs/ext4/xattr.c
@@ -245,7 +245,7 @@ __ext4_xattr_check_block(struct inode *inode, struct buffer_head *bh,
 					 bh->b_data);
 errout:
 	if (error)
-		__ext4_error_inode(inode, function, line, 0,
+		__ext4_error_inode(inode, function, line, 0, -error,
 				   "corrupted xattr block %llu",
 				   (unsigned long long) bh->b_blocknr);
 	else
@@ -269,7 +269,7 @@ __xattr_check_inode(struct inode *inode, struct ext4_xattr_ibody_header *header,
 	error = ext4_xattr_check_entries(IFIRST(header), end, IFIRST(header));
 errout:
 	if (error)
-		__ext4_error_inode(inode, function, line, 0,
+		__ext4_error_inode(inode, function, line, 0, -error,
 				   "corrupted in-inode xattr");
 	return error;
 }
@@ -2880,9 +2880,9 @@ int ext4_xattr_delete_inode(handle_t *handle, struct inode *inode,
 		if (IS_ERR(bh)) {
 			error = PTR_ERR(bh);
 			if (error == -EIO) {
-				ext4_set_errno(inode->i_sb, EIO);
-				EXT4_ERROR_INODE(inode, "block %llu read error",
-						 EXT4_I(inode)->i_file_acl);
+				EXT4_ERROR_INODE_ERR(inode, EIO,
+						     "block %llu read error",
+						     EXT4_I(inode)->i_file_acl);
 			}
 			bh = NULL;
 			goto cleanup;
diff --git a/fs/ext4/xattr.h b/fs/ext4/xattr.h
index f39cad2..ffe21ac 100644
--- a/fs/ext4/xattr.h
+++ b/fs/ext4/xattr.h
@@ -48,7 +48,7 @@ struct ext4_xattr_entry {
 	__le32	e_value_inum;	/* inode in which the value is stored */
 	__le32	e_value_size;	/* size of attribute value */
 	__le32	e_hash;		/* hash value of name and value */
-	char	e_name[0];	/* attribute name */
+	char	e_name[];	/* attribute name */
 };
 
 #define EXT4_XATTR_PAD_BITS		2
@@ -118,7 +118,7 @@ struct ext4_xattr_ibody_find {
 
 struct ext4_xattr_inode_array {
 	unsigned int count;		/* # of used items in the array */
-	struct inode *inodes[0];
+	struct inode *inodes[];
 };
 
 extern const struct xattr_handler ext4_xattr_user_handler;
diff --git a/fs/f2fs/Kconfig b/fs/f2fs/Kconfig
index f0faada..bb68d21 100644
--- a/fs/f2fs/Kconfig
+++ b/fs/f2fs/Kconfig
@@ -118,3 +118,12 @@
 	default y
 	help
 	  Support LZ4 compress algorithm, if unsure, say Y.
+
+config F2FS_FS_ZSTD
+	bool "ZSTD compression support"
+	depends on F2FS_FS_COMPRESSION
+	select ZSTD_COMPRESS
+	select ZSTD_DECOMPRESS
+	default y
+	help
+	  Support ZSTD compress algorithm, if unsure, say Y.
diff --git a/fs/f2fs/checkpoint.c b/fs/f2fs/checkpoint.c
index 44e84ac..852890b 100644
--- a/fs/f2fs/checkpoint.c
+++ b/fs/f2fs/checkpoint.c
@@ -50,9 +50,6 @@ struct page *f2fs_grab_meta_page(struct f2fs_sb_info *sbi, pgoff_t index)
 	return page;
 }
 
-/*
- * We guarantee no failure on the returned page.
- */
 static struct page *__get_meta_page(struct f2fs_sb_info *sbi, pgoff_t index,
 							bool is_meta)
 {
@@ -206,7 +203,7 @@ bool f2fs_is_valid_blkaddr(struct f2fs_sb_info *sbi,
 }
 
 /*
- * Readahead CP/NAT/SIT/SSA pages
+ * Readahead CP/NAT/SIT/SSA/POR pages
  */
 int f2fs_ra_meta_pages(struct f2fs_sb_info *sbi, block_t start, int nrpages,
 							int type, bool sync)
@@ -898,7 +895,7 @@ int f2fs_get_valid_checkpoint(struct f2fs_sb_info *sbi)
 		return -ENOMEM;
 	/*
 	 * Finding out valid cp block involves read both
-	 * sets( cp pack1 and cp pack 2)
+	 * sets( cp pack 1 and cp pack 2)
 	 */
 	cp_start_blk_no = le32_to_cpu(fsb->cp_blkaddr);
 	cp1 = validate_checkpoint(sbi, cp_start_blk_no, &cp1_version);
@@ -1250,20 +1247,20 @@ static void unblock_operations(struct f2fs_sb_info *sbi)
 	f2fs_unlock_all(sbi);
 }
 
-void f2fs_wait_on_all_pages_writeback(struct f2fs_sb_info *sbi)
+void f2fs_wait_on_all_pages(struct f2fs_sb_info *sbi, int type)
 {
 	DEFINE_WAIT(wait);
 
 	for (;;) {
 		prepare_to_wait(&sbi->cp_wait, &wait, TASK_UNINTERRUPTIBLE);
 
-		if (!get_pages(sbi, F2FS_WB_CP_DATA))
+		if (!get_pages(sbi, type))
 			break;
 
 		if (unlikely(f2fs_cp_error(sbi)))
 			break;
 
-		io_schedule_timeout(5*HZ);
+		io_schedule_timeout(DEFAULT_IO_TIMEOUT);
 	}
 	finish_wait(&sbi->cp_wait, &wait);
 }
@@ -1301,10 +1298,14 @@ static void update_ckpt_flags(struct f2fs_sb_info *sbi, struct cp_control *cpc)
 	else
 		__clear_ckpt_flags(ckpt, CP_ORPHAN_PRESENT_FLAG);
 
-	if (is_sbi_flag_set(sbi, SBI_NEED_FSCK) ||
-		is_sbi_flag_set(sbi, SBI_IS_RESIZEFS))
+	if (is_sbi_flag_set(sbi, SBI_NEED_FSCK))
 		__set_ckpt_flags(ckpt, CP_FSCK_FLAG);
 
+	if (is_sbi_flag_set(sbi, SBI_IS_RESIZEFS))
+		__set_ckpt_flags(ckpt, CP_RESIZEFS_FLAG);
+	else
+		__clear_ckpt_flags(ckpt, CP_RESIZEFS_FLAG);
+
 	if (is_sbi_flag_set(sbi, SBI_CP_DISABLED))
 		__set_ckpt_flags(ckpt, CP_DISABLED_FLAG);
 	else
@@ -1384,13 +1385,8 @@ static int do_checkpoint(struct f2fs_sb_info *sbi, struct cp_control *cpc)
 
 	/* Flush all the NAT/SIT pages */
 	f2fs_sync_meta_pages(sbi, META, LONG_MAX, FS_CP_META_IO);
-	f2fs_bug_on(sbi, get_pages(sbi, F2FS_DIRTY_META) &&
-					!f2fs_cp_error(sbi));
 
-	/*
-	 * modify checkpoint
-	 * version number is already updated
-	 */
+	/* start to update checkpoint, cp ver is already updated previously */
 	ckpt->elapsed_time = cpu_to_le64(get_mtime(sbi, true));
 	ckpt->free_segment_count = cpu_to_le32(free_segments(sbi));
 	for (i = 0; i < NR_CURSEG_NODE_TYPE; i++) {
@@ -1493,11 +1489,11 @@ static int do_checkpoint(struct f2fs_sb_info *sbi, struct cp_control *cpc)
 
 	/* Here, we have one bio having CP pack except cp pack 2 page */
 	f2fs_sync_meta_pages(sbi, META, LONG_MAX, FS_CP_META_IO);
-	f2fs_bug_on(sbi, get_pages(sbi, F2FS_DIRTY_META) &&
-					!f2fs_cp_error(sbi));
+	/* Wait for all dirty meta pages to be submitted for IO */
+	f2fs_wait_on_all_pages(sbi, F2FS_DIRTY_META);
 
 	/* wait for previous submitted meta pages writeback */
-	f2fs_wait_on_all_pages_writeback(sbi);
+	f2fs_wait_on_all_pages(sbi, F2FS_WB_CP_DATA);
 
 	/* flush all device cache */
 	err = f2fs_flush_device_cache(sbi);
@@ -1506,7 +1502,7 @@ static int do_checkpoint(struct f2fs_sb_info *sbi, struct cp_control *cpc)
 
 	/* barrier and flush checkpoint cp pack 2 page if it can */
 	commit_checkpoint(sbi, ckpt, start_blk);
-	f2fs_wait_on_all_pages_writeback(sbi);
+	f2fs_wait_on_all_pages(sbi, F2FS_WB_CP_DATA);
 
 	/*
 	 * invalidate intermediate page cache borrowed from meta inode which are
@@ -1543,9 +1539,6 @@ static int do_checkpoint(struct f2fs_sb_info *sbi, struct cp_control *cpc)
 	return unlikely(f2fs_cp_error(sbi)) ? -EIO : 0;
 }
 
-/*
- * We guarantee that this checkpoint procedure will not fail.
- */
 int f2fs_write_checkpoint(struct f2fs_sb_info *sbi, struct cp_control *cpc)
 {
 	struct f2fs_checkpoint *ckpt = F2FS_CKPT(sbi);
@@ -1613,7 +1606,6 @@ int f2fs_write_checkpoint(struct f2fs_sb_info *sbi, struct cp_control *cpc)
 
 	f2fs_flush_sit_entries(sbi, cpc);
 
-	/* unlock all the fs_lock[] in do_checkpoint() */
 	err = do_checkpoint(sbi, cpc);
 	if (err)
 		f2fs_release_discard_addrs(sbi);
@@ -1626,7 +1618,7 @@ int f2fs_write_checkpoint(struct f2fs_sb_info *sbi, struct cp_control *cpc)
 	if (cpc->reason & CP_RECOVERY)
 		f2fs_notice(sbi, "checkpoint: version = %llx", ckpt_ver);
 
-	/* do checkpoint periodically */
+	/* update CP_TIME to trigger checkpoint periodically */
 	f2fs_update_time(sbi, CP_TIME);
 	trace_f2fs_write_checkpoint(sbi->sb, cpc->reason, "finish checkpoint");
 out:
diff --git a/fs/f2fs/compress.c b/fs/f2fs/compress.c
index d8a64be..df7b2d1 100644
--- a/fs/f2fs/compress.c
+++ b/fs/f2fs/compress.c
@@ -11,6 +11,7 @@
 #include <linux/backing-dev.h>
 #include <linux/lzo.h>
 #include <linux/lz4.h>
+#include <linux/zstd.h>
 
 #include "f2fs.h"
 #include "node.h"
@@ -20,6 +21,8 @@ struct f2fs_compress_ops {
 	int (*init_compress_ctx)(struct compress_ctx *cc);
 	void (*destroy_compress_ctx)(struct compress_ctx *cc);
 	int (*compress_pages)(struct compress_ctx *cc);
+	int (*init_decompress_ctx)(struct decompress_io_ctx *dic);
+	void (*destroy_decompress_ctx)(struct decompress_io_ctx *dic);
 	int (*decompress_pages)(struct decompress_io_ctx *dic);
 };
 
@@ -52,7 +55,7 @@ bool f2fs_is_compressed_page(struct page *page)
 }
 
 static void f2fs_set_compressed_page(struct page *page,
-		struct inode *inode, pgoff_t index, void *data, refcount_t *r)
+		struct inode *inode, pgoff_t index, void *data)
 {
 	SetPagePrivate(page);
 	set_page_private(page, (unsigned long)data);
@@ -60,8 +63,6 @@ static void f2fs_set_compressed_page(struct page *page,
 	/* i_crypto_info and iv index */
 	page->index = index;
 	page->mapping = inode->i_mapping;
-	if (r)
-		refcount_inc(r);
 }
 
 static void f2fs_put_compressed_page(struct page *page)
@@ -291,6 +292,165 @@ static const struct f2fs_compress_ops f2fs_lz4_ops = {
 };
 #endif
 
+#ifdef CONFIG_F2FS_FS_ZSTD
+#define F2FS_ZSTD_DEFAULT_CLEVEL	1
+
+static int zstd_init_compress_ctx(struct compress_ctx *cc)
+{
+	ZSTD_parameters params;
+	ZSTD_CStream *stream;
+	void *workspace;
+	unsigned int workspace_size;
+
+	params = ZSTD_getParams(F2FS_ZSTD_DEFAULT_CLEVEL, cc->rlen, 0);
+	workspace_size = ZSTD_CStreamWorkspaceBound(params.cParams);
+
+	workspace = f2fs_kvmalloc(F2FS_I_SB(cc->inode),
+					workspace_size, GFP_NOFS);
+	if (!workspace)
+		return -ENOMEM;
+
+	stream = ZSTD_initCStream(params, 0, workspace, workspace_size);
+	if (!stream) {
+		printk_ratelimited("%sF2FS-fs (%s): %s ZSTD_initCStream failed\n",
+				KERN_ERR, F2FS_I_SB(cc->inode)->sb->s_id,
+				__func__);
+		kvfree(workspace);
+		return -EIO;
+	}
+
+	cc->private = workspace;
+	cc->private2 = stream;
+
+	cc->clen = cc->rlen - PAGE_SIZE - COMPRESS_HEADER_SIZE;
+	return 0;
+}
+
+static void zstd_destroy_compress_ctx(struct compress_ctx *cc)
+{
+	kvfree(cc->private);
+	cc->private = NULL;
+	cc->private2 = NULL;
+}
+
+static int zstd_compress_pages(struct compress_ctx *cc)
+{
+	ZSTD_CStream *stream = cc->private2;
+	ZSTD_inBuffer inbuf;
+	ZSTD_outBuffer outbuf;
+	int src_size = cc->rlen;
+	int dst_size = src_size - PAGE_SIZE - COMPRESS_HEADER_SIZE;
+	int ret;
+
+	inbuf.pos = 0;
+	inbuf.src = cc->rbuf;
+	inbuf.size = src_size;
+
+	outbuf.pos = 0;
+	outbuf.dst = cc->cbuf->cdata;
+	outbuf.size = dst_size;
+
+	ret = ZSTD_compressStream(stream, &outbuf, &inbuf);
+	if (ZSTD_isError(ret)) {
+		printk_ratelimited("%sF2FS-fs (%s): %s ZSTD_compressStream failed, ret: %d\n",
+				KERN_ERR, F2FS_I_SB(cc->inode)->sb->s_id,
+				__func__, ZSTD_getErrorCode(ret));
+		return -EIO;
+	}
+
+	ret = ZSTD_endStream(stream, &outbuf);
+	if (ZSTD_isError(ret)) {
+		printk_ratelimited("%sF2FS-fs (%s): %s ZSTD_endStream returned %d\n",
+				KERN_ERR, F2FS_I_SB(cc->inode)->sb->s_id,
+				__func__, ZSTD_getErrorCode(ret));
+		return -EIO;
+	}
+
+	cc->clen = outbuf.pos;
+	return 0;
+}
+
+static int zstd_init_decompress_ctx(struct decompress_io_ctx *dic)
+{
+	ZSTD_DStream *stream;
+	void *workspace;
+	unsigned int workspace_size;
+
+	workspace_size = ZSTD_DStreamWorkspaceBound(MAX_COMPRESS_WINDOW_SIZE);
+
+	workspace = f2fs_kvmalloc(F2FS_I_SB(dic->inode),
+					workspace_size, GFP_NOFS);
+	if (!workspace)
+		return -ENOMEM;
+
+	stream = ZSTD_initDStream(MAX_COMPRESS_WINDOW_SIZE,
+					workspace, workspace_size);
+	if (!stream) {
+		printk_ratelimited("%sF2FS-fs (%s): %s ZSTD_initDStream failed\n",
+				KERN_ERR, F2FS_I_SB(dic->inode)->sb->s_id,
+				__func__);
+		kvfree(workspace);
+		return -EIO;
+	}
+
+	dic->private = workspace;
+	dic->private2 = stream;
+
+	return 0;
+}
+
+static void zstd_destroy_decompress_ctx(struct decompress_io_ctx *dic)
+{
+	kvfree(dic->private);
+	dic->private = NULL;
+	dic->private2 = NULL;
+}
+
+static int zstd_decompress_pages(struct decompress_io_ctx *dic)
+{
+	ZSTD_DStream *stream = dic->private2;
+	ZSTD_inBuffer inbuf;
+	ZSTD_outBuffer outbuf;
+	int ret;
+
+	inbuf.pos = 0;
+	inbuf.src = dic->cbuf->cdata;
+	inbuf.size = dic->clen;
+
+	outbuf.pos = 0;
+	outbuf.dst = dic->rbuf;
+	outbuf.size = dic->rlen;
+
+	ret = ZSTD_decompressStream(stream, &outbuf, &inbuf);
+	if (ZSTD_isError(ret)) {
+		printk_ratelimited("%sF2FS-fs (%s): %s ZSTD_compressStream failed, ret: %d\n",
+				KERN_ERR, F2FS_I_SB(dic->inode)->sb->s_id,
+				__func__, ZSTD_getErrorCode(ret));
+		return -EIO;
+	}
+
+	if (dic->rlen != outbuf.pos) {
+		printk_ratelimited("%sF2FS-fs (%s): %s ZSTD invalid rlen:%zu, "
+				"expected:%lu\n", KERN_ERR,
+				F2FS_I_SB(dic->inode)->sb->s_id,
+				__func__, dic->rlen,
+				PAGE_SIZE << dic->log_cluster_size);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static const struct f2fs_compress_ops f2fs_zstd_ops = {
+	.init_compress_ctx	= zstd_init_compress_ctx,
+	.destroy_compress_ctx	= zstd_destroy_compress_ctx,
+	.compress_pages		= zstd_compress_pages,
+	.init_decompress_ctx	= zstd_init_decompress_ctx,
+	.destroy_decompress_ctx	= zstd_destroy_decompress_ctx,
+	.decompress_pages	= zstd_decompress_pages,
+};
+#endif
+
 static const struct f2fs_compress_ops *f2fs_cops[COMPRESS_MAX] = {
 #ifdef CONFIG_F2FS_FS_LZO
 	&f2fs_lzo_ops,
@@ -302,6 +462,11 @@ static const struct f2fs_compress_ops *f2fs_cops[COMPRESS_MAX] = {
 #else
 	NULL,
 #endif
+#ifdef CONFIG_F2FS_FS_ZSTD
+	&f2fs_zstd_ops,
+#else
+	NULL,
+#endif
 };
 
 bool f2fs_is_compress_backend_ready(struct inode *inode)
@@ -334,9 +499,11 @@ static int f2fs_compress_pages(struct compress_ctx *cc)
 	trace_f2fs_compress_pages_start(cc->inode, cc->cluster_idx,
 				cc->cluster_size, fi->i_compress_algorithm);
 
-	ret = cops->init_compress_ctx(cc);
-	if (ret)
-		goto out;
+	if (cops->init_compress_ctx) {
+		ret = cops->init_compress_ctx(cc);
+		if (ret)
+			goto out;
+	}
 
 	max_len = COMPRESS_HEADER_SIZE + cc->clen;
 	cc->nr_cpages = DIV_ROUND_UP(max_len, PAGE_SIZE);
@@ -380,21 +547,27 @@ static int f2fs_compress_pages(struct compress_ctx *cc)
 	}
 
 	cc->cbuf->clen = cpu_to_le32(cc->clen);
-	cc->cbuf->chksum = cpu_to_le32(0);
 
 	for (i = 0; i < COMPRESS_DATA_RESERVED_SIZE; i++)
 		cc->cbuf->reserved[i] = cpu_to_le32(0);
 
+	nr_cpages = DIV_ROUND_UP(cc->clen + COMPRESS_HEADER_SIZE, PAGE_SIZE);
+
+	/* zero out any unused part of the last page */
+	memset(&cc->cbuf->cdata[cc->clen], 0,
+	       (nr_cpages * PAGE_SIZE) - (cc->clen + COMPRESS_HEADER_SIZE));
+
 	vunmap(cc->cbuf);
 	vunmap(cc->rbuf);
 
-	nr_cpages = DIV_ROUND_UP(cc->clen + COMPRESS_HEADER_SIZE, PAGE_SIZE);
-
 	for (i = nr_cpages; i < cc->nr_cpages; i++) {
 		f2fs_put_compressed_page(cc->cpages[i]);
 		cc->cpages[i] = NULL;
 	}
 
+	if (cops->destroy_compress_ctx)
+		cops->destroy_compress_ctx(cc);
+
 	cc->nr_cpages = nr_cpages;
 
 	trace_f2fs_compress_pages_end(cc->inode, cc->cluster_idx,
@@ -413,7 +586,8 @@ static int f2fs_compress_pages(struct compress_ctx *cc)
 	kfree(cc->cpages);
 	cc->cpages = NULL;
 destroy_compress_ctx:
-	cops->destroy_compress_ctx(cc);
+	if (cops->destroy_compress_ctx)
+		cops->destroy_compress_ctx(cc);
 out:
 	trace_f2fs_compress_pages_end(cc->inode, cc->cluster_idx,
 							cc->clen, ret);
@@ -447,10 +621,16 @@ void f2fs_decompress_pages(struct bio *bio, struct page *page, bool verity)
 		goto out_free_dic;
 	}
 
+	if (cops->init_decompress_ctx) {
+		ret = cops->init_decompress_ctx(dic);
+		if (ret)
+			goto out_free_dic;
+	}
+
 	dic->rbuf = vmap(dic->tpages, dic->cluster_size, VM_MAP, PAGE_KERNEL);
 	if (!dic->rbuf) {
 		ret = -ENOMEM;
-		goto out_free_dic;
+		goto destroy_decompress_ctx;
 	}
 
 	dic->cbuf = vmap(dic->cpages, dic->nr_cpages, VM_MAP, PAGE_KERNEL_RO);
@@ -473,7 +653,12 @@ void f2fs_decompress_pages(struct bio *bio, struct page *page, bool verity)
 	vunmap(dic->cbuf);
 out_vunmap_rbuf:
 	vunmap(dic->rbuf);
+destroy_decompress_ctx:
+	if (cops->destroy_decompress_ctx)
+		cops->destroy_decompress_ctx(dic);
 out_free_dic:
+	if (verity)
+		refcount_set(&dic->ref, dic->nr_cpages);
 	if (!verity)
 		f2fs_decompress_end_io(dic->rpages, dic->cluster_size,
 								ret, false);
@@ -532,8 +717,7 @@ static bool __cluster_may_compress(struct compress_ctx *cc)
 	return true;
 }
 
-/* return # of compressed block addresses */
-static int f2fs_compressed_blocks(struct compress_ctx *cc)
+static int __f2fs_cluster_blocks(struct compress_ctx *cc, bool compr)
 {
 	struct dnode_of_data dn;
 	int ret;
@@ -554,10 +738,15 @@ static int f2fs_compressed_blocks(struct compress_ctx *cc)
 		for (i = 1; i < cc->cluster_size; i++) {
 			block_t blkaddr;
 
-			blkaddr = datablock_addr(dn.inode,
+			blkaddr = data_blkaddr(dn.inode,
 					dn.node_page, dn.ofs_in_node + i);
-			if (blkaddr != NULL_ADDR)
-				ret++;
+			if (compr) {
+				if (__is_valid_data_blkaddr(blkaddr))
+					ret++;
+			} else {
+				if (blkaddr != NULL_ADDR)
+					ret++;
+			}
 		}
 	}
 fail:
@@ -565,6 +754,18 @@ static int f2fs_compressed_blocks(struct compress_ctx *cc)
 	return ret;
 }
 
+/* return # of compressed blocks in compressed cluster */
+static int f2fs_compressed_blocks(struct compress_ctx *cc)
+{
+	return __f2fs_cluster_blocks(cc, true);
+}
+
+/* return # of valid blocks in compressed cluster */
+static int f2fs_cluster_blocks(struct compress_ctx *cc, bool compr)
+{
+	return __f2fs_cluster_blocks(cc, false);
+}
+
 int f2fs_is_compressed_cluster(struct inode *inode, pgoff_t index)
 {
 	struct compress_ctx cc = {
@@ -574,7 +775,7 @@ int f2fs_is_compressed_cluster(struct inode *inode, pgoff_t index)
 		.cluster_idx = index >> F2FS_I(inode)->i_log_cluster_size,
 	};
 
-	return f2fs_compressed_blocks(&cc);
+	return f2fs_cluster_blocks(&cc, false);
 }
 
 static bool cluster_may_compress(struct compress_ctx *cc)
@@ -623,7 +824,7 @@ static int prepare_compress_overwrite(struct compress_ctx *cc,
 	bool prealloc;
 
 retry:
-	ret = f2fs_compressed_blocks(cc);
+	ret = f2fs_cluster_blocks(cc, false);
 	if (ret <= 0)
 		return ret;
 
@@ -653,7 +854,7 @@ static int prepare_compress_overwrite(struct compress_ctx *cc,
 		struct bio *bio = NULL;
 
 		ret = f2fs_read_multi_pages(cc, &bio, cc->cluster_size,
-						&last_block_in_bio, false);
+					&last_block_in_bio, false, true);
 		f2fs_destroy_compress_ctx(cc);
 		if (ret)
 			goto release_pages;
@@ -772,7 +973,6 @@ static int f2fs_write_compressed_pages(struct compress_ctx *cc,
 		.encrypted_page = NULL,
 		.compressed_page = NULL,
 		.submitted = false,
-		.need_lock = LOCK_RETRY,
 		.io_type = io_type,
 		.io_wbc = wbc,
 		.encrypted = f2fs_encrypted_file(cc->inode),
@@ -785,16 +985,17 @@ static int f2fs_write_compressed_pages(struct compress_ctx *cc,
 	loff_t psize;
 	int i, err;
 
-	set_new_dnode(&dn, cc->inode, NULL, NULL, 0);
+	if (!f2fs_trylock_op(sbi))
+		return -EAGAIN;
 
-	f2fs_lock_op(sbi);
+	set_new_dnode(&dn, cc->inode, NULL, NULL, 0);
 
 	err = f2fs_get_dnode_of_data(&dn, start_idx, LOOKUP_NODE);
 	if (err)
 		goto out_unlock_op;
 
 	for (i = 0; i < cc->cluster_size; i++) {
-		if (datablock_addr(dn.inode, dn.node_page,
+		if (data_blkaddr(dn.inode, dn.node_page,
 					dn.ofs_in_node + i) == NULL_ADDR)
 			goto out_put_dnode;
 	}
@@ -813,7 +1014,7 @@ static int f2fs_write_compressed_pages(struct compress_ctx *cc,
 
 	cic->magic = F2FS_COMPRESSED_PAGE_MAGIC;
 	cic->inode = inode;
-	refcount_set(&cic->ref, 1);
+	refcount_set(&cic->ref, cc->nr_cpages);
 	cic->rpages = f2fs_kzalloc(sbi, sizeof(struct page *) <<
 			cc->log_cluster_size, GFP_NOFS);
 	if (!cic->rpages)
@@ -823,8 +1024,7 @@ static int f2fs_write_compressed_pages(struct compress_ctx *cc,
 
 	for (i = 0; i < cc->nr_cpages; i++) {
 		f2fs_set_compressed_page(cc->cpages[i], inode,
-					cc->rpages[i + 1]->index,
-					cic, i ? &cic->ref : NULL);
+					cc->rpages[i + 1]->index, cic);
 		fio.compressed_page = cc->cpages[i];
 		if (fio.encrypted) {
 			fio.page = cc->rpages[i + 1];
@@ -843,9 +1043,8 @@ static int f2fs_write_compressed_pages(struct compress_ctx *cc,
 	for (i = 0; i < cc->cluster_size; i++, dn.ofs_in_node++) {
 		block_t blkaddr;
 
-		blkaddr = datablock_addr(dn.inode, dn.node_page,
-							dn.ofs_in_node);
-		fio.page = cic->rpages[i];
+		blkaddr = f2fs_data_blkaddr(&dn);
+		fio.page = cc->rpages[i];
 		fio.old_blkaddr = blkaddr;
 
 		/* cluster header */
@@ -895,10 +1094,10 @@ static int f2fs_write_compressed_pages(struct compress_ctx *cc,
 	f2fs_put_dnode(&dn);
 	f2fs_unlock_op(sbi);
 
-	down_write(&fi->i_sem);
+	spin_lock(&fi->i_size_lock);
 	if (fi->last_disk_size < psize)
 		fi->last_disk_size = psize;
-	up_write(&fi->i_sem);
+	spin_unlock(&fi->i_size_lock);
 
 	f2fs_put_rpages(cc);
 	f2fs_destroy_compress_ctx(cc);
@@ -984,24 +1183,30 @@ static int f2fs_write_raw_pages(struct compress_ctx *cc,
 				unlock_page(cc->rpages[i]);
 				ret = 0;
 			} else if (ret == -EAGAIN) {
+				/*
+				 * for quota file, just redirty left pages to
+				 * avoid deadlock caused by cluster update race
+				 * from foreground operation.
+				 */
+				if (IS_NOQUOTA(cc->inode)) {
+					err = 0;
+					goto out_err;
+				}
 				ret = 0;
 				cond_resched();
-				congestion_wait(BLK_RW_ASYNC, HZ/50);
+				congestion_wait(BLK_RW_ASYNC,
+						DEFAULT_IO_TIMEOUT);
 				lock_page(cc->rpages[i]);
 				clear_page_dirty_for_io(cc->rpages[i]);
 				goto retry_write;
 			}
 			err = ret;
-			goto out_fail;
+			goto out_err;
 		}
 
 		*submitted += _submitted;
 	}
 	return 0;
-
-out_fail:
-	/* TODO: revoke partially updated block addresses */
-	BUG_ON(compr_blocks);
 out_err:
 	for (++i; i < cc->cluster_size; i++) {
 		if (!cc->rpages[i])
@@ -1069,7 +1274,7 @@ struct decompress_io_ctx *f2fs_alloc_dic(struct compress_ctx *cc)
 
 	dic->magic = F2FS_COMPRESSED_PAGE_MAGIC;
 	dic->inode = cc->inode;
-	refcount_set(&dic->ref, 1);
+	refcount_set(&dic->ref, cc->nr_cpages);
 	dic->cluster_idx = cc->cluster_idx;
 	dic->cluster_size = cc->cluster_size;
 	dic->log_cluster_size = cc->log_cluster_size;
@@ -1093,8 +1298,7 @@ struct decompress_io_ctx *f2fs_alloc_dic(struct compress_ctx *cc)
 			goto out_free;
 
 		f2fs_set_compressed_page(page, cc->inode,
-					start_idx + i + 1,
-					dic, i ? &dic->ref : NULL);
+					start_idx + i + 1, dic);
 		dic->cpages[i] = page;
 	}
 
@@ -1104,20 +1308,16 @@ struct decompress_io_ctx *f2fs_alloc_dic(struct compress_ctx *cc)
 		goto out_free;
 
 	for (i = 0; i < dic->cluster_size; i++) {
-		if (cc->rpages[i])
+		if (cc->rpages[i]) {
+			dic->tpages[i] = cc->rpages[i];
 			continue;
+		}
 
 		dic->tpages[i] = f2fs_grab_page();
 		if (!dic->tpages[i])
 			goto out_free;
 	}
 
-	for (i = 0; i < dic->cluster_size; i++) {
-		if (dic->tpages[i])
-			continue;
-		dic->tpages[i] = cc->rpages[i];
-	}
-
 	return dic;
 
 out_free:
@@ -1133,7 +1333,10 @@ void f2fs_free_dic(struct decompress_io_ctx *dic)
 		for (i = 0; i < dic->cluster_size; i++) {
 			if (dic->rpages[i])
 				continue;
-			f2fs_put_page(dic->tpages[i], 1);
+			if (!dic->tpages[i])
+				continue;
+			unlock_page(dic->tpages[i]);
+			put_page(dic->tpages[i]);
 		}
 		kfree(dic->tpages);
 	}
@@ -1162,15 +1365,17 @@ void f2fs_decompress_end_io(struct page **rpages,
 		if (!rpage)
 			continue;
 
-		if (err || PageError(rpage)) {
-			ClearPageUptodate(rpage);
-			ClearPageError(rpage);
-		} else {
-			if (!verity || fsverity_verify_page(rpage))
-				SetPageUptodate(rpage);
-			else
-				SetPageError(rpage);
+		if (err || PageError(rpage))
+			goto clear_uptodate;
+
+		if (!verity || fsverity_verify_page(rpage)) {
+			SetPageUptodate(rpage);
+			goto unlock;
 		}
+clear_uptodate:
+		ClearPageUptodate(rpage);
+		ClearPageError(rpage);
+unlock:
 		unlock_page(rpage);
 	}
 }
diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
index b27b721..cdf2f62 100644
--- a/fs/f2fs/data.c
+++ b/fs/f2fs/data.c
@@ -54,17 +54,13 @@ static inline struct bio *__f2fs_bio_alloc(gfp_t gfp_mask,
 	return bio_alloc_bioset(gfp_mask, nr_iovecs, &f2fs_bioset);
 }
 
-struct bio *f2fs_bio_alloc(struct f2fs_sb_info *sbi, int npages, bool no_fail)
+struct bio *f2fs_bio_alloc(struct f2fs_sb_info *sbi, int npages, bool noio)
 {
-	struct bio *bio;
-
-	if (no_fail) {
+	if (noio) {
 		/* No failure on bio allocation */
-		bio = __f2fs_bio_alloc(GFP_NOIO, npages);
-		if (!bio)
-			bio = __f2fs_bio_alloc(GFP_NOIO | __GFP_NOFAIL, npages);
-		return bio;
+		return __f2fs_bio_alloc(GFP_NOIO, npages);
 	}
+
 	if (time_to_inject(sbi, FAULT_ALLOC_BIO)) {
 		f2fs_show_injection_info(sbi, FAULT_ALLOC_BIO);
 		return NULL;
@@ -143,6 +139,8 @@ static void __read_end_io(struct bio *bio, bool compr, bool verity)
 			f2fs_decompress_pages(bio, page, verity);
 			continue;
 		}
+		if (verity)
+			continue;
 #endif
 
 		/* PG_error was set if any post_read step failed */
@@ -191,12 +189,38 @@ static void f2fs_verify_pages(struct page **rpages, unsigned int cluster_size)
 
 static void f2fs_verify_bio(struct bio *bio)
 {
-	struct page *page = bio_first_page_all(bio);
-	struct decompress_io_ctx *dic =
-			(struct decompress_io_ctx *)page_private(page);
+	struct bio_vec *bv;
+	struct bvec_iter_all iter_all;
 
-	f2fs_verify_pages(dic->rpages, dic->cluster_size);
-	f2fs_free_dic(dic);
+	bio_for_each_segment_all(bv, bio, iter_all) {
+		struct page *page = bv->bv_page;
+		struct decompress_io_ctx *dic;
+
+		dic = (struct decompress_io_ctx *)page_private(page);
+
+		if (dic) {
+			if (refcount_dec_not_one(&dic->ref))
+				continue;
+			f2fs_verify_pages(dic->rpages,
+						dic->cluster_size);
+			f2fs_free_dic(dic);
+			continue;
+		}
+
+		if (bio->bi_status || PageError(page))
+			goto clear_uptodate;
+
+		if (fsverity_verify_page(page)) {
+			SetPageUptodate(page);
+			goto unlock;
+		}
+clear_uptodate:
+		ClearPageUptodate(page);
+		ClearPageError(page);
+unlock:
+		dec_page_count(F2FS_P_SB(page), __read_io_type(page));
+		unlock_page(page);
+	}
 }
 #endif
 
@@ -364,9 +388,6 @@ static void f2fs_write_end_io(struct bio *bio)
 	bio_put(bio);
 }
 
-/*
- * Return true, if pre_bio's bdev is same as its target device.
- */
 struct block_device *f2fs_target_device(struct f2fs_sb_info *sbi,
 				block_t blk_addr, struct bio *bio)
 {
@@ -403,6 +424,9 @@ int f2fs_target_device_index(struct f2fs_sb_info *sbi, block_t blkaddr)
 	return 0;
 }
 
+/*
+ * Return true, if pre_bio's bdev is same as its target device.
+ */
 static bool __same_bdev(struct f2fs_sb_info *sbi,
 				block_t blk_addr, struct bio *bio)
 {
@@ -410,9 +434,6 @@ static bool __same_bdev(struct f2fs_sb_info *sbi,
 	return bio->bi_disk == b->bd_disk && bio->bi_partno == b->bd_partno;
 }
 
-/*
- * Low-level block read/write IO operations.
- */
 static struct bio *__bio_alloc(struct f2fs_io_info *fio, int npages)
 {
 	struct f2fs_sb_info *sbi = fio->sbi;
@@ -445,7 +466,7 @@ static inline void __submit_bio(struct f2fs_sb_info *sbi,
 		if (type != DATA && type != NODE)
 			goto submit_io;
 
-		if (test_opt(sbi, LFS) && current->plug)
+		if (f2fs_lfs_mode(sbi) && current->plug)
 			blk_finish_plug(current->plug);
 
 		if (F2FS_IO_ALIGNED(sbi))
@@ -928,14 +949,15 @@ static inline bool f2fs_need_verity(const struct inode *inode, pgoff_t idx)
 
 static struct bio *f2fs_grab_read_bio(struct inode *inode, block_t blkaddr,
 				      unsigned nr_pages, unsigned op_flag,
-				      pgoff_t first_idx)
+				      pgoff_t first_idx, bool for_write)
 {
 	struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
 	struct bio *bio;
 	struct bio_post_read_ctx *ctx;
 	unsigned int post_read_steps = 0;
 
-	bio = f2fs_bio_alloc(sbi, min_t(int, nr_pages, BIO_MAX_PAGES), false);
+	bio = f2fs_bio_alloc(sbi, min_t(int, nr_pages, BIO_MAX_PAGES),
+								for_write);
 	if (!bio)
 		return ERR_PTR(-ENOMEM);
 	f2fs_target_device(sbi, blkaddr, bio);
@@ -970,12 +992,12 @@ static void f2fs_release_read_bio(struct bio *bio)
 
 /* This can handle encryption stuffs */
 static int f2fs_submit_page_read(struct inode *inode, struct page *page,
-							block_t blkaddr)
+						block_t blkaddr, bool for_write)
 {
 	struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
 	struct bio *bio;
 
-	bio = f2fs_grab_read_bio(inode, blkaddr, 1, 0, page->index);
+	bio = f2fs_grab_read_bio(inode, blkaddr, 1, 0, page->index, for_write);
 	if (IS_ERR(bio))
 		return PTR_ERR(bio);
 
@@ -1047,8 +1069,7 @@ int f2fs_reserve_new_blocks(struct dnode_of_data *dn, blkcnt_t count)
 	f2fs_wait_on_page_writeback(dn->node_page, NODE, true, true);
 
 	for (; count > 0; dn->ofs_in_node++) {
-		block_t blkaddr = datablock_addr(dn->inode,
-					dn->node_page, dn->ofs_in_node);
+		block_t blkaddr = f2fs_data_blkaddr(dn);
 		if (blkaddr == NULL_ADDR) {
 			dn->data_blkaddr = NEW_ADDR;
 			__set_data_blkaddr(dn);
@@ -1162,7 +1183,7 @@ struct page *f2fs_get_read_data_page(struct inode *inode, pgoff_t index,
 		return page;
 	}
 
-	err = f2fs_submit_page_read(inode, page, dn.data_blkaddr);
+	err = f2fs_submit_page_read(inode, page, dn.data_blkaddr, for_write);
 	if (err)
 		goto put_err;
 	return page;
@@ -1300,8 +1321,7 @@ static int __allocate_data_block(struct dnode_of_data *dn, int seg_type)
 	if (err)
 		return err;
 
-	dn->data_blkaddr = datablock_addr(dn->inode,
-				dn->node_page, dn->ofs_in_node);
+	dn->data_blkaddr = f2fs_data_blkaddr(dn);
 	if (dn->data_blkaddr != NULL_ADDR)
 		goto alloc;
 
@@ -1388,13 +1408,9 @@ void __do_map_lock(struct f2fs_sb_info *sbi, int flag, bool lock)
 }
 
 /*
- * f2fs_map_blocks() now supported readahead/bmap/rw direct_IO with
- * f2fs_map_blocks structure.
- * If original data blocks are allocated, then give them to blockdev.
- * Otherwise,
- *     a. preallocate requested block addresses
- *     b. do not use extent cache for better performance
- *     c. give the block addresses to blockdev
+ * f2fs_map_blocks() tries to find or build mapping relationship which
+ * maps continuous logical blocks to physical blocks, and return such
+ * info via f2fs_map_blocks structure.
  */
 int f2fs_map_blocks(struct inode *inode, struct f2fs_map_blocks *map,
 						int create, int flag)
@@ -1422,7 +1438,7 @@ int f2fs_map_blocks(struct inode *inode, struct f2fs_map_blocks *map,
 	end = pgofs + maxblocks;
 
 	if (!create && f2fs_lookup_extent_cache(inode, pgofs, &ei)) {
-		if (test_opt(sbi, LFS) && flag == F2FS_GET_BLOCK_DIO &&
+		if (f2fs_lfs_mode(sbi) && flag == F2FS_GET_BLOCK_DIO &&
 							map->m_may_create)
 			goto next_dnode;
 
@@ -1467,7 +1483,7 @@ int f2fs_map_blocks(struct inode *inode, struct f2fs_map_blocks *map,
 	end_offset = ADDRS_PER_PAGE(dn.node_page, inode);
 
 next_block:
-	blkaddr = datablock_addr(dn.inode, dn.node_page, dn.ofs_in_node);
+	blkaddr = f2fs_data_blkaddr(&dn);
 
 	if (__is_valid_data_blkaddr(blkaddr) &&
 		!f2fs_is_valid_blkaddr(sbi, blkaddr, DATA_GENERIC_ENHANCE)) {
@@ -1477,7 +1493,7 @@ int f2fs_map_blocks(struct inode *inode, struct f2fs_map_blocks *map,
 
 	if (__is_valid_data_blkaddr(blkaddr)) {
 		/* use out-place-update for driect IO under LFS mode */
-		if (test_opt(sbi, LFS) && flag == F2FS_GET_BLOCK_DIO &&
+		if (f2fs_lfs_mode(sbi) && flag == F2FS_GET_BLOCK_DIO &&
 							map->m_may_create) {
 			err = __allocate_data_block(&dn, map->m_seg_type);
 			if (err)
@@ -1980,7 +1996,8 @@ static int f2fs_read_single_page(struct inode *inode, struct page *page,
 	}
 	if (bio == NULL) {
 		bio = f2fs_grab_read_bio(inode, block_nr, nr_pages,
-				is_readahead ? REQ_RAHEAD : 0, page->index);
+				is_readahead ? REQ_RAHEAD : 0, page->index,
+				false);
 		if (IS_ERR(bio)) {
 			ret = PTR_ERR(bio);
 			bio = NULL;
@@ -2015,7 +2032,7 @@ static int f2fs_read_single_page(struct inode *inode, struct page *page,
 #ifdef CONFIG_F2FS_FS_COMPRESSION
 int f2fs_read_multi_pages(struct compress_ctx *cc, struct bio **bio_ret,
 				unsigned nr_pages, sector_t *last_block_in_bio,
-				bool is_readahead)
+				bool is_readahead, bool for_write)
 {
 	struct dnode_of_data dn;
 	struct inode *inode = cc->inode;
@@ -2031,7 +2048,8 @@ int f2fs_read_multi_pages(struct compress_ctx *cc, struct bio **bio_ret,
 
 	f2fs_bug_on(sbi, f2fs_cluster_is_empty(cc));
 
-	last_block_in_file = (i_size_read(inode) + blocksize - 1) >> blkbits;
+	last_block_in_file = (f2fs_readpage_limit(inode) +
+					blocksize - 1) >> blkbits;
 
 	/* get rid of pages beyond EOF */
 	for (i = 0; i < cc->cluster_size; i++) {
@@ -2067,7 +2085,7 @@ int f2fs_read_multi_pages(struct compress_ctx *cc, struct bio **bio_ret,
 	for (i = 1; i < cc->cluster_size; i++) {
 		block_t blkaddr;
 
-		blkaddr = datablock_addr(dn.inode, dn.node_page,
+		blkaddr = data_blkaddr(dn.inode, dn.node_page,
 						dn.ofs_in_node + i);
 
 		if (!__is_valid_data_blkaddr(blkaddr))
@@ -2096,7 +2114,7 @@ int f2fs_read_multi_pages(struct compress_ctx *cc, struct bio **bio_ret,
 		struct page *page = dic->cpages[i];
 		block_t blkaddr;
 
-		blkaddr = datablock_addr(dn.inode, dn.node_page,
+		blkaddr = data_blkaddr(dn.inode, dn.node_page,
 						dn.ofs_in_node + i + 1);
 
 		if (bio && !page_is_mergeable(sbi, bio,
@@ -2109,7 +2127,7 @@ int f2fs_read_multi_pages(struct compress_ctx *cc, struct bio **bio_ret,
 		if (!bio) {
 			bio = f2fs_grab_read_bio(inode, blkaddr, nr_pages,
 					is_readahead ? REQ_RAHEAD : 0,
-					page->index);
+					page->index, for_write);
 			if (IS_ERR(bio)) {
 				ret = PTR_ERR(bio);
 				bio = NULL;
@@ -2210,7 +2228,7 @@ int f2fs_mpage_readpages(struct address_space *mapping,
 				ret = f2fs_read_multi_pages(&cc, &bio,
 							max_nr_pages,
 							&last_block_in_bio,
-							is_readahead);
+							is_readahead, false);
 				f2fs_destroy_compress_ctx(&cc);
 				if (ret)
 					goto set_error_page;
@@ -2253,7 +2271,7 @@ int f2fs_mpage_readpages(struct address_space *mapping,
 				ret = f2fs_read_multi_pages(&cc, &bio,
 							max_nr_pages,
 							&last_block_in_bio,
-							is_readahead);
+							is_readahead, false);
 				f2fs_destroy_compress_ctx(&cc);
 			}
 		}
@@ -2326,7 +2344,7 @@ int f2fs_encrypt_one_page(struct f2fs_io_info *fio)
 		/* flush pending IOs and wait for a while in the ENOMEM case */
 		if (PTR_ERR(fio->encrypted_page) == -ENOMEM) {
 			f2fs_flush_merged_writes(fio->sbi);
-			congestion_wait(BLK_RW_ASYNC, HZ/50);
+			congestion_wait(BLK_RW_ASYNC, DEFAULT_IO_TIMEOUT);
 			gfp_flags |= __GFP_NOFAIL;
 			goto retry_encrypt;
 		}
@@ -2397,7 +2415,7 @@ bool f2fs_should_update_outplace(struct inode *inode, struct f2fs_io_info *fio)
 {
 	struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
 
-	if (test_opt(sbi, LFS))
+	if (f2fs_lfs_mode(sbi))
 		return true;
 	if (S_ISDIR(inode->i_mode))
 		return true;
@@ -2647,10 +2665,10 @@ int f2fs_write_single_data_page(struct page *page, int *submitted,
 	if (err) {
 		file_set_keep_isize(inode);
 	} else {
-		down_write(&F2FS_I(inode)->i_sem);
+		spin_lock(&F2FS_I(inode)->i_size_lock);
 		if (F2FS_I(inode)->last_disk_size < psize)
 			F2FS_I(inode)->last_disk_size = psize;
-		up_write(&F2FS_I(inode)->i_sem);
+		spin_unlock(&F2FS_I(inode)->i_size_lock);
 	}
 
 done:
@@ -2917,7 +2935,7 @@ static int f2fs_write_cache_pages(struct address_space *mapping,
 					if (wbc->sync_mode == WB_SYNC_ALL) {
 						cond_resched();
 						congestion_wait(BLK_RW_ASYNC,
-								HZ/50);
+							DEFAULT_IO_TIMEOUT);
 						goto retry_write;
 					}
 					goto next;
@@ -2973,15 +2991,17 @@ static int f2fs_write_cache_pages(struct address_space *mapping,
 static inline bool __should_serialize_io(struct inode *inode,
 					struct writeback_control *wbc)
 {
-	if (!S_ISREG(inode->i_mode))
-		return false;
-	if (f2fs_compressed_file(inode))
-		return true;
-	if (IS_NOQUOTA(inode))
-		return false;
 	/* to avoid deadlock in path of data flush */
 	if (F2FS_I(inode)->cp_task)
 		return false;
+
+	if (!S_ISREG(inode->i_mode))
+		return false;
+	if (IS_NOQUOTA(inode))
+		return false;
+
+	if (f2fs_compressed_file(inode))
+		return true;
 	if (wbc->sync_mode != WB_SYNC_ALL)
 		return true;
 	if (get_dirty_pages(inode) >= SM_I(F2FS_I_SB(inode))->min_seq_blocks)
@@ -3283,7 +3303,7 @@ static int f2fs_write_begin(struct file *file, struct address_space *mapping,
 			err = -EFSCORRUPTED;
 			goto fail;
 		}
-		err = f2fs_submit_page_read(inode, page, blkaddr);
+		err = f2fs_submit_page_read(inode, page, blkaddr, true);
 		if (err)
 			goto fail;
 
@@ -3464,7 +3484,8 @@ static ssize_t f2fs_direct_IO(struct kiocb *iocb, struct iov_iter *iter)
 	err = __blockdev_direct_IO(iocb, inode, inode->i_sb->s_bdev,
 			iter, rw == WRITE ? get_data_block_dio_write :
 			get_data_block_dio, NULL, f2fs_dio_submit_bio,
-			DIO_LOCKING | DIO_SKIP_HOLES);
+			rw == WRITE ? DIO_LOCKING | DIO_SKIP_HOLES :
+			DIO_SKIP_HOLES);
 
 	if (do_opu)
 		up_read(&fi->i_gc_rwsem[READ]);
@@ -3861,7 +3882,7 @@ void f2fs_destroy_post_read_wq(struct f2fs_sb_info *sbi)
 
 int __init f2fs_init_bio_entry_cache(void)
 {
-	bio_entry_slab = f2fs_kmem_cache_create("bio_entry_slab",
+	bio_entry_slab = f2fs_kmem_cache_create("f2fs_bio_entry_slab",
 			sizeof(struct bio_entry));
 	if (!bio_entry_slab)
 		return -ENOMEM;
diff --git a/fs/f2fs/debug.c b/fs/f2fs/debug.c
index 6b89eae..0dbcb0f 100644
--- a/fs/f2fs/debug.c
+++ b/fs/f2fs/debug.c
@@ -301,6 +301,9 @@ static int stat_show(struct seq_file *s, void *v)
 			   si->ssa_area_segs, si->main_area_segs);
 		seq_printf(s, "(OverProv:%d Resv:%d)]\n\n",
 			   si->overp_segs, si->rsvd_segs);
+		seq_printf(s, "Current Time Sec: %llu / Mounted Time Sec: %llu\n\n",
+					ktime_get_boottime_seconds(),
+					SIT_I(si->sbi)->mounted_time);
 		if (test_opt(si->sbi, DISCARD))
 			seq_printf(s, "Utilization: %u%% (%u valid blocks, %u discard blocks)\n",
 				si->utilization, si->valid_count, si->discard_blks);
diff --git a/fs/f2fs/dir.c b/fs/f2fs/dir.c
index 27d0dd7..44bfc46 100644
--- a/fs/f2fs/dir.c
+++ b/fs/f2fs/dir.c
@@ -471,7 +471,6 @@ struct page *f2fs_init_inode_metadata(struct inode *inode, struct inode *dir,
 			struct page *dpage)
 {
 	struct page *page;
-	int dummy_encrypt = DUMMY_ENCRYPTION_ENABLED(F2FS_I_SB(dir));
 	int err;
 
 	if (is_inode_flag_set(inode, FI_NEW_INODE)) {
@@ -498,8 +497,7 @@ struct page *f2fs_init_inode_metadata(struct inode *inode, struct inode *dir,
 		if (err)
 			goto put_error;
 
-		if ((IS_ENCRYPTED(dir) || dummy_encrypt) &&
-					f2fs_may_encrypt(inode)) {
+		if (IS_ENCRYPTED(inode)) {
 			err = fscrypt_inherit_context(dir, inode, page, false);
 			if (err)
 				goto put_error;
@@ -850,12 +848,6 @@ void f2fs_delete_entry(struct f2fs_dir_entry *dentry, struct page *page,
 			0);
 	set_page_dirty(page);
 
-	dir->i_ctime = dir->i_mtime = current_time(dir);
-	f2fs_mark_inode_dirty_sync(dir, false);
-
-	if (inode)
-		f2fs_drop_nlink(dir, inode);
-
 	if (bit_pos == NR_DENTRY_IN_BLOCK &&
 		!f2fs_truncate_hole(dir, page->index, page->index + 1)) {
 		f2fs_clear_page_cache_dirty_tag(page);
@@ -867,6 +859,12 @@ void f2fs_delete_entry(struct f2fs_dir_entry *dentry, struct page *page,
 		f2fs_remove_dirty_inode(dir);
 	}
 	f2fs_put_page(page, 1);
+
+	dir->i_ctime = dir->i_mtime = current_time(dir);
+	f2fs_mark_inode_dirty_sync(dir, false);
+
+	if (inode)
+		f2fs_drop_nlink(dir, inode);
 }
 
 bool f2fs_empty_dir(struct inode *dir)
diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
index 088c3e7..ba470d5 100644
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -75,7 +75,6 @@ extern const char *f2fs_fault_name[FAULT_MAX];
 /*
  * For mount options
  */
-#define F2FS_MOUNT_BG_GC		0x00000001
 #define F2FS_MOUNT_DISABLE_ROLL_FORWARD	0x00000002
 #define F2FS_MOUNT_DISCARD		0x00000004
 #define F2FS_MOUNT_NOHEAP		0x00000008
@@ -89,11 +88,8 @@ extern const char *f2fs_fault_name[FAULT_MAX];
 #define F2FS_MOUNT_NOBARRIER		0x00000800
 #define F2FS_MOUNT_FASTBOOT		0x00001000
 #define F2FS_MOUNT_EXTENT_CACHE		0x00002000
-#define F2FS_MOUNT_FORCE_FG_GC		0x00004000
 #define F2FS_MOUNT_DATA_FLUSH		0x00008000
 #define F2FS_MOUNT_FAULT_INJECTION	0x00010000
-#define F2FS_MOUNT_ADAPTIVE		0x00020000
-#define F2FS_MOUNT_LFS			0x00040000
 #define F2FS_MOUNT_USRQUOTA		0x00080000
 #define F2FS_MOUNT_GRPQUOTA		0x00100000
 #define F2FS_MOUNT_PRJQUOTA		0x00200000
@@ -101,6 +97,7 @@ extern const char *f2fs_fault_name[FAULT_MAX];
 #define F2FS_MOUNT_INLINE_XATTR_SIZE	0x00800000
 #define F2FS_MOUNT_RESERVE_ROOT		0x01000000
 #define F2FS_MOUNT_DISABLE_CHECKPOINT	0x02000000
+#define F2FS_MOUNT_NORECOVERY		0x04000000
 
 #define F2FS_OPTION(sbi)	((sbi)->mount_opt)
 #define clear_opt(sbi, option)	(F2FS_OPTION(sbi).opt &= ~F2FS_MOUNT_##option)
@@ -139,6 +136,8 @@ struct f2fs_mount_info {
 	int whint_mode;
 	int alloc_mode;			/* segment allocation policy */
 	int fsync_mode;			/* fsync policy */
+	int fs_mode;			/* fs mode: LFS or ADAPTIVE */
+	int bggc_mode;			/* bggc mode: off, on or sync */
 	bool test_dummy_encryption;	/* test dummy encryption */
 	block_t unusable_cap;		/* Amount of space allowed to be
 					 * unusable when disabling checkpoint
@@ -332,8 +331,8 @@ struct discard_policy {
 	bool io_aware;			/* issue discard in idle time */
 	bool sync;			/* submit discard with REQ_SYNC flag */
 	bool ordered;			/* issue discard by lba order */
+	bool timeout;			/* discard timeout for put_super */
 	unsigned int granularity;	/* discard granularity */
-	int timeout;			/* discard timeout for put_super */
 };
 
 struct discard_cmd_control {
@@ -428,6 +427,7 @@ static inline bool __has_cursum_space(struct f2fs_journal *journal,
 #define F2FS_IOC_GET_PIN_FILE		_IOR(F2FS_IOCTL_MAGIC, 14, __u32)
 #define F2FS_IOC_PRECACHE_EXTENTS	_IO(F2FS_IOCTL_MAGIC, 15)
 #define F2FS_IOC_RESIZE_FS		_IOW(F2FS_IOCTL_MAGIC, 16, __u64)
+#define F2FS_IOC_GET_COMPRESS_BLOCKS	_IOR(F2FS_IOCTL_MAGIC, 17, __u64)
 
 #define F2FS_IOC_GET_VOLUME_NAME	FS_IOC_GETFSLABEL
 #define F2FS_IOC_SET_VOLUME_NAME	FS_IOC_SETFSLABEL
@@ -560,6 +560,9 @@ enum {
 
 #define DEFAULT_RETRY_IO_COUNT	8	/* maximum retry read IO count */
 
+/* congestion wait timeout value, default: 20ms */
+#define	DEFAULT_IO_TIMEOUT	(msecs_to_jiffies(20))
+
 /* maximum retry quota flush count */
 #define DEFAULT_RETRY_QUOTA_FLUSH_COUNT		8
 
@@ -676,6 +679,44 @@ enum {
 	MAX_GC_FAILURE
 };
 
+/* used for f2fs_inode_info->flags */
+enum {
+	FI_NEW_INODE,		/* indicate newly allocated inode */
+	FI_DIRTY_INODE,		/* indicate inode is dirty or not */
+	FI_AUTO_RECOVER,	/* indicate inode is recoverable */
+	FI_DIRTY_DIR,		/* indicate directory has dirty pages */
+	FI_INC_LINK,		/* need to increment i_nlink */
+	FI_ACL_MODE,		/* indicate acl mode */
+	FI_NO_ALLOC,		/* should not allocate any blocks */
+	FI_FREE_NID,		/* free allocated nide */
+	FI_NO_EXTENT,		/* not to use the extent cache */
+	FI_INLINE_XATTR,	/* used for inline xattr */
+	FI_INLINE_DATA,		/* used for inline data*/
+	FI_INLINE_DENTRY,	/* used for inline dentry */
+	FI_APPEND_WRITE,	/* inode has appended data */
+	FI_UPDATE_WRITE,	/* inode has in-place-update data */
+	FI_NEED_IPU,		/* used for ipu per file */
+	FI_ATOMIC_FILE,		/* indicate atomic file */
+	FI_ATOMIC_COMMIT,	/* indicate the state of atomical committing */
+	FI_VOLATILE_FILE,	/* indicate volatile file */
+	FI_FIRST_BLOCK_WRITTEN,	/* indicate #0 data block was written */
+	FI_DROP_CACHE,		/* drop dirty page cache */
+	FI_DATA_EXIST,		/* indicate data exists */
+	FI_INLINE_DOTS,		/* indicate inline dot dentries */
+	FI_DO_DEFRAG,		/* indicate defragment is running */
+	FI_DIRTY_FILE,		/* indicate regular/symlink has dirty pages */
+	FI_NO_PREALLOC,		/* indicate skipped preallocated blocks */
+	FI_HOT_DATA,		/* indicate file is hot */
+	FI_EXTRA_ATTR,		/* indicate file has extra attribute */
+	FI_PROJ_INHERIT,	/* indicate file inherits projectid */
+	FI_PIN_FILE,		/* indicate file should not be gced */
+	FI_ATOMIC_REVOKE_REQUEST, /* request to drop atomic data */
+	FI_VERITY_IN_PROGRESS,	/* building fs-verity Merkle tree */
+	FI_COMPRESSED_FILE,	/* indicate file's data can be compressed */
+	FI_MMAP_FILE,		/* indicate file was mmapped */
+	FI_MAX,			/* max flag, never be used */
+};
+
 struct f2fs_inode_info {
 	struct inode vfs_inode;		/* serve a vfs inode */
 	unsigned long i_flags;		/* keep an inode flags for ioctl */
@@ -688,7 +729,7 @@ struct f2fs_inode_info {
 	umode_t i_acl_mode;		/* keep file acl mode temporarily */
 
 	/* Use below internally in f2fs*/
-	unsigned long flags;		/* use to pass per-file flags */
+	unsigned long flags[BITS_TO_LONGS(FI_MAX)];	/* use to pass per-file flags */
 	struct rw_semaphore i_sem;	/* protect fi info */
 	atomic_t dirty_pages;		/* # of dirty pages */
 	f2fs_hash_t chash;		/* hash value of given file name */
@@ -697,6 +738,7 @@ struct f2fs_inode_info {
 	struct task_struct *cp_task;	/* separate cp/wb IO stats*/
 	nid_t i_xattr_nid;		/* node id that contains xattrs */
 	loff_t	last_disk_size;		/* lastly written file size */
+	spinlock_t i_size_lock;		/* protect last_disk_size */
 
 #ifdef CONFIG_QUOTA
 	struct dquot *i_dquot[MAXQUOTAS];
@@ -1173,6 +1215,20 @@ enum {
 };
 
 enum {
+	BGGC_MODE_ON,		/* background gc is on */
+	BGGC_MODE_OFF,		/* background gc is off */
+	BGGC_MODE_SYNC,		/*
+				 * background gc is on, migrating blocks
+				 * like foreground gc
+				 */
+};
+
+enum {
+	FS_MODE_ADAPTIVE,	/* use both lfs/ssr allocation */
+	FS_MODE_LFS,		/* use lfs allocation only */
+};
+
+enum {
 	WHINT_MODE_OFF,		/* not pass down write hints */
 	WHINT_MODE_USER,	/* try to pass down hints given by users */
 	WHINT_MODE_FS,		/* pass down hints with F2FS policy */
@@ -1212,13 +1268,13 @@ enum fsync_mode {
 enum compress_algorithm_type {
 	COMPRESS_LZO,
 	COMPRESS_LZ4,
+	COMPRESS_ZSTD,
 	COMPRESS_MAX,
 };
 
-#define COMPRESS_DATA_RESERVED_SIZE		4
+#define COMPRESS_DATA_RESERVED_SIZE		5
 struct compress_data {
 	__le32 clen;			/* compressed data size */
-	__le32 chksum;			/* checksum of compressed data */
 	__le32 reserved[COMPRESS_DATA_RESERVED_SIZE];	/* reserved */
 	u8 cdata[];			/* compressed data */
 };
@@ -1242,6 +1298,7 @@ struct compress_ctx {
 	size_t rlen;			/* valid data length in rbuf */
 	size_t clen;			/* valid data length in cbuf */
 	void *private;			/* payload buffer for specified compression algorithm */
+	void *private2;			/* extra payload buffer */
 };
 
 /* compress context for write IO path */
@@ -1271,11 +1328,14 @@ struct decompress_io_ctx {
 	size_t clen;			/* valid data length in cbuf */
 	refcount_t ref;			/* referrence count of compressed page */
 	bool failed;			/* indicate IO error during decompression */
+	void *private;			/* payload buffer for specified decompression algorithm */
+	void *private2;			/* extra payload buffer */
 };
 
 #define NULL_CLUSTER			((unsigned int)(~0))
 #define MIN_COMPRESS_LOG_SIZE		2
 #define MAX_COMPRESS_LOG_SIZE		8
+#define MAX_COMPRESS_WINDOW_SIZE	((PAGE_SIZE) << MAX_COMPRESS_LOG_SIZE)
 
 struct f2fs_sb_info {
 	struct super_block *sb;			/* pointer to VFS super block */
@@ -1471,6 +1531,9 @@ struct f2fs_sb_info {
 	__u32 s_chksum_seed;
 
 	struct workqueue_struct *post_read_wq;	/* post read workqueue */
+
+	struct kmem_cache *inline_xattr_slab;	/* inline xattr entry */
+	unsigned int inline_xattr_slab_size;	/* default inline xattr slab size */
 };
 
 struct f2fs_private_dio {
@@ -2211,7 +2274,7 @@ static inline void dec_valid_node_count(struct f2fs_sb_info *sbi,
 		dquot_free_inode(inode);
 	} else {
 		if (unlikely(inode->i_blocks == 0)) {
-			f2fs_warn(sbi, "Inconsistent i_blocks, ino:%lu, iblocks:%llu",
+			f2fs_warn(sbi, "dec_valid_node_count: inconsistent i_blocks, ino:%lu, iblocks:%llu",
 				  inode->i_ino,
 				  (unsigned long long)inode->i_blocks);
 			set_sbi_flag(sbi, SBI_NEED_FSCK);
@@ -2379,7 +2442,7 @@ static inline __le32 *blkaddr_in_node(struct f2fs_node *node)
 }
 
 static inline int f2fs_has_extra_attr(struct inode *inode);
-static inline block_t datablock_addr(struct inode *inode,
+static inline block_t data_blkaddr(struct inode *inode,
 			struct page *node_page, unsigned int offset)
 {
 	struct f2fs_node *raw_node;
@@ -2389,9 +2452,9 @@ static inline block_t datablock_addr(struct inode *inode,
 
 	raw_node = F2FS_NODE(node_page);
 
-	/* from GC path only */
 	if (is_inode) {
 		if (!inode)
+			/* from GC path only */
 			base = offset_in_addr(&raw_node->i);
 		else if (f2fs_has_extra_attr(inode))
 			base = get_extra_isize(inode);
@@ -2401,6 +2464,11 @@ static inline block_t datablock_addr(struct inode *inode,
 	return le32_to_cpu(addr_array[base + offset]);
 }
 
+static inline block_t f2fs_data_blkaddr(struct dnode_of_data *dn)
+{
+	return data_blkaddr(dn->inode, dn->node_page, dn->ofs_in_node);
+}
+
 static inline int f2fs_test_bit(unsigned int nr, char *addr)
 {
 	int mask;
@@ -2498,43 +2566,6 @@ static inline __u32 f2fs_mask_flags(umode_t mode, __u32 flags)
 		return flags & F2FS_OTHER_FLMASK;
 }
 
-/* used for f2fs_inode_info->flags */
-enum {
-	FI_NEW_INODE,		/* indicate newly allocated inode */
-	FI_DIRTY_INODE,		/* indicate inode is dirty or not */
-	FI_AUTO_RECOVER,	/* indicate inode is recoverable */
-	FI_DIRTY_DIR,		/* indicate directory has dirty pages */
-	FI_INC_LINK,		/* need to increment i_nlink */
-	FI_ACL_MODE,		/* indicate acl mode */
-	FI_NO_ALLOC,		/* should not allocate any blocks */
-	FI_FREE_NID,		/* free allocated nide */
-	FI_NO_EXTENT,		/* not to use the extent cache */
-	FI_INLINE_XATTR,	/* used for inline xattr */
-	FI_INLINE_DATA,		/* used for inline data*/
-	FI_INLINE_DENTRY,	/* used for inline dentry */
-	FI_APPEND_WRITE,	/* inode has appended data */
-	FI_UPDATE_WRITE,	/* inode has in-place-update data */
-	FI_NEED_IPU,		/* used for ipu per file */
-	FI_ATOMIC_FILE,		/* indicate atomic file */
-	FI_ATOMIC_COMMIT,	/* indicate the state of atomical committing */
-	FI_VOLATILE_FILE,	/* indicate volatile file */
-	FI_FIRST_BLOCK_WRITTEN,	/* indicate #0 data block was written */
-	FI_DROP_CACHE,		/* drop dirty page cache */
-	FI_DATA_EXIST,		/* indicate data exists */
-	FI_INLINE_DOTS,		/* indicate inline dot dentries */
-	FI_DO_DEFRAG,		/* indicate defragment is running */
-	FI_DIRTY_FILE,		/* indicate regular/symlink has dirty pages */
-	FI_NO_PREALLOC,		/* indicate skipped preallocated blocks */
-	FI_HOT_DATA,		/* indicate file is hot */
-	FI_EXTRA_ATTR,		/* indicate file has extra attribute */
-	FI_PROJ_INHERIT,	/* indicate file inherits projectid */
-	FI_PIN_FILE,		/* indicate file should not be gced */
-	FI_ATOMIC_REVOKE_REQUEST, /* request to drop atomic data */
-	FI_VERITY_IN_PROGRESS,	/* building fs-verity Merkle tree */
-	FI_COMPRESSED_FILE,	/* indicate file's data can be compressed */
-	FI_MMAP_FILE,		/* indicate file was mmapped */
-};
-
 static inline void __mark_inode_dirty_flag(struct inode *inode,
 						int flag, bool set)
 {
@@ -2549,27 +2580,24 @@ static inline void __mark_inode_dirty_flag(struct inode *inode,
 	case FI_DATA_EXIST:
 	case FI_INLINE_DOTS:
 	case FI_PIN_FILE:
-	case FI_COMPRESSED_FILE:
 		f2fs_mark_inode_dirty_sync(inode, true);
 	}
 }
 
 static inline void set_inode_flag(struct inode *inode, int flag)
 {
-	if (!test_bit(flag, &F2FS_I(inode)->flags))
-		set_bit(flag, &F2FS_I(inode)->flags);
+	test_and_set_bit(flag, F2FS_I(inode)->flags);
 	__mark_inode_dirty_flag(inode, flag, true);
 }
 
 static inline int is_inode_flag_set(struct inode *inode, int flag)
 {
-	return test_bit(flag, &F2FS_I(inode)->flags);
+	return test_bit(flag, F2FS_I(inode)->flags);
 }
 
 static inline void clear_inode_flag(struct inode *inode, int flag)
 {
-	if (test_bit(flag, &F2FS_I(inode)->flags))
-		clear_bit(flag, &F2FS_I(inode)->flags);
+	test_and_clear_bit(flag, F2FS_I(inode)->flags);
 	__mark_inode_dirty_flag(inode, flag, false);
 }
 
@@ -2660,19 +2688,19 @@ static inline void get_inline_info(struct inode *inode, struct f2fs_inode *ri)
 	struct f2fs_inode_info *fi = F2FS_I(inode);
 
 	if (ri->i_inline & F2FS_INLINE_XATTR)
-		set_bit(FI_INLINE_XATTR, &fi->flags);
+		set_bit(FI_INLINE_XATTR, fi->flags);
 	if (ri->i_inline & F2FS_INLINE_DATA)
-		set_bit(FI_INLINE_DATA, &fi->flags);
+		set_bit(FI_INLINE_DATA, fi->flags);
 	if (ri->i_inline & F2FS_INLINE_DENTRY)
-		set_bit(FI_INLINE_DENTRY, &fi->flags);
+		set_bit(FI_INLINE_DENTRY, fi->flags);
 	if (ri->i_inline & F2FS_DATA_EXIST)
-		set_bit(FI_DATA_EXIST, &fi->flags);
+		set_bit(FI_DATA_EXIST, fi->flags);
 	if (ri->i_inline & F2FS_INLINE_DOTS)
-		set_bit(FI_INLINE_DOTS, &fi->flags);
+		set_bit(FI_INLINE_DOTS, fi->flags);
 	if (ri->i_inline & F2FS_EXTRA_ATTR)
-		set_bit(FI_EXTRA_ATTR, &fi->flags);
+		set_bit(FI_EXTRA_ATTR, fi->flags);
 	if (ri->i_inline & F2FS_PIN_FILE)
-		set_bit(FI_PIN_FILE, &fi->flags);
+		set_bit(FI_PIN_FILE, fi->flags);
 }
 
 static inline void set_raw_inline(struct inode *inode, struct f2fs_inode *ri)
@@ -2857,9 +2885,9 @@ static inline bool f2fs_skip_inode_update(struct inode *inode, int dsync)
 	if (!f2fs_is_time_consistent(inode))
 		return false;
 
-	down_read(&F2FS_I(inode)->i_sem);
+	spin_lock(&F2FS_I(inode)->i_size_lock);
 	ret = F2FS_I(inode)->last_disk_size == i_size_read(inode);
-	up_read(&F2FS_I(inode)->i_sem);
+	spin_unlock(&F2FS_I(inode)->i_size_lock);
 
 	return ret;
 }
@@ -3213,7 +3241,7 @@ void f2fs_drop_inmem_pages(struct inode *inode);
 void f2fs_drop_inmem_page(struct inode *inode, struct page *page);
 int f2fs_commit_inmem_pages(struct inode *inode);
 void f2fs_balance_fs(struct f2fs_sb_info *sbi, bool need);
-void f2fs_balance_fs_bg(struct f2fs_sb_info *sbi);
+void f2fs_balance_fs_bg(struct f2fs_sb_info *sbi, bool from_bg);
 int f2fs_issue_flush(struct f2fs_sb_info *sbi, nid_t ino);
 int f2fs_create_flush_cmd_control(struct f2fs_sb_info *sbi);
 int f2fs_flush_device_cache(struct f2fs_sb_info *sbi);
@@ -3309,7 +3337,7 @@ int f2fs_get_valid_checkpoint(struct f2fs_sb_info *sbi);
 void f2fs_update_dirty_page(struct inode *inode, struct page *page);
 void f2fs_remove_dirty_inode(struct inode *inode);
 int f2fs_sync_dirty_inodes(struct f2fs_sb_info *sbi, enum inode_type type);
-void f2fs_wait_on_all_pages_writeback(struct f2fs_sb_info *sbi);
+void f2fs_wait_on_all_pages(struct f2fs_sb_info *sbi, int type);
 int f2fs_write_checkpoint(struct f2fs_sb_info *sbi, struct cp_control *cpc);
 void f2fs_init_ino_entry_info(struct f2fs_sb_info *sbi);
 int __init f2fs_create_checkpoint_caches(void);
@@ -3320,7 +3348,7 @@ void f2fs_destroy_checkpoint_caches(void);
  */
 int __init f2fs_init_bioset(void);
 void f2fs_destroy_bioset(void);
-struct bio *f2fs_bio_alloc(struct f2fs_sb_info *sbi, int npages, bool no_fail);
+struct bio *f2fs_bio_alloc(struct f2fs_sb_info *sbi, int npages, bool noio);
 int f2fs_init_bio_entry_cache(void);
 void f2fs_destroy_bio_entry_cache(void);
 void f2fs_submit_bio(struct f2fs_sb_info *sbi,
@@ -3776,7 +3804,7 @@ int f2fs_write_multi_pages(struct compress_ctx *cc,
 int f2fs_is_compressed_cluster(struct inode *inode, pgoff_t index);
 int f2fs_read_multi_pages(struct compress_ctx *cc, struct bio **bio_ret,
 				unsigned nr_pages, sector_t *last_block_in_bio,
-				bool is_readahead);
+				bool is_readahead, bool for_write);
 struct decompress_io_ctx *f2fs_alloc_dic(struct compress_ctx *cc);
 void f2fs_free_dic(struct decompress_io_ctx *dic);
 void f2fs_decompress_end_io(struct page **rpages,
@@ -3813,6 +3841,7 @@ static inline void set_compress_context(struct inode *inode)
 	F2FS_I(inode)->i_flags |= F2FS_COMPR_FL;
 	set_inode_flag(inode, FI_COMPRESSED_FILE);
 	stat_inc_compr_inode(inode);
+	f2fs_mark_inode_dirty_sync(inode, true);
 }
 
 static inline u64 f2fs_disable_compressed_file(struct inode *inode)
@@ -3821,12 +3850,17 @@ static inline u64 f2fs_disable_compressed_file(struct inode *inode)
 
 	if (!f2fs_compressed_file(inode))
 		return 0;
-	if (fi->i_compr_blocks)
-		return fi->i_compr_blocks;
+	if (S_ISREG(inode->i_mode)) {
+		if (get_dirty_pages(inode))
+			return 1;
+		if (fi->i_compr_blocks)
+			return fi->i_compr_blocks;
+	}
 
 	fi->i_flags &= ~F2FS_COMPR_FL;
-	clear_inode_flag(inode, FI_COMPRESSED_FILE);
 	stat_dec_compr_inode(inode);
+	clear_inode_flag(inode, FI_COMPRESSED_FILE);
+	f2fs_mark_inode_dirty_sync(inode, true);
 	return 0;
 }
 
@@ -3903,31 +3937,25 @@ static inline bool f2fs_hw_is_readonly(struct f2fs_sb_info *sbi)
 	return false;
 }
 
-
-static inline void set_opt_mode(struct f2fs_sb_info *sbi, unsigned int mt)
+static inline bool f2fs_lfs_mode(struct f2fs_sb_info *sbi)
 {
-	clear_opt(sbi, ADAPTIVE);
-	clear_opt(sbi, LFS);
-
-	switch (mt) {
-	case F2FS_MOUNT_ADAPTIVE:
-		set_opt(sbi, ADAPTIVE);
-		break;
-	case F2FS_MOUNT_LFS:
-		set_opt(sbi, LFS);
-		break;
-	}
+	return F2FS_OPTION(sbi).fs_mode == FS_MODE_LFS;
 }
 
-static inline bool f2fs_may_encrypt(struct inode *inode)
+static inline bool f2fs_may_encrypt(struct inode *dir, struct inode *inode)
 {
 #ifdef CONFIG_FS_ENCRYPTION
+	struct f2fs_sb_info *sbi = F2FS_I_SB(dir);
 	umode_t mode = inode->i_mode;
 
-	return (S_ISREG(mode) || S_ISDIR(mode) || S_ISLNK(mode));
-#else
-	return false;
+	/*
+	 * If the directory encrypted or dummy encryption enabled,
+	 * then we should encrypt the inode.
+	 */
+	if (IS_ENCRYPTED(dir) || DUMMY_ENCRYPTION_ENABLED(sbi))
+		return (S_ISREG(mode) || S_ISDIR(mode) || S_ISLNK(mode));
 #endif
+	return false;
 }
 
 static inline bool f2fs_may_compress(struct inode *inode)
@@ -3971,7 +3999,7 @@ static inline int allow_outplace_dio(struct inode *inode,
 	struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
 	int rw = iov_iter_rw(iter);
 
-	return (test_opt(sbi, LFS) && (rw == WRITE) &&
+	return (f2fs_lfs_mode(sbi) && (rw == WRITE) &&
 				!block_unaligned_IO(inode, iocb, iter));
 }
 
@@ -3993,7 +4021,7 @@ static inline bool f2fs_force_buffered_io(struct inode *inode,
 	 */
 	if (f2fs_sb_has_blkzoned(sbi))
 		return true;
-	if (test_opt(sbi, LFS) && (rw == WRITE)) {
+	if (f2fs_lfs_mode(sbi) && (rw == WRITE)) {
 		if (block_unaligned_IO(inode, iocb, iter))
 			return true;
 		if (F2FS_IO_ALIGNED(sbi))
diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
index 351762f..6ab8f62 100644
--- a/fs/f2fs/file.c
+++ b/fs/f2fs/file.c
@@ -106,13 +106,20 @@ static vm_fault_t f2fs_vm_page_mkwrite(struct vm_fault *vmf)
 		err = f2fs_get_block(&dn, page->index);
 		f2fs_put_dnode(&dn);
 		__do_map_lock(sbi, F2FS_GET_BLOCK_PRE_AIO, false);
-		if (err) {
-			unlock_page(page);
-			goto out_sem;
-		}
 	}
 
-	/* fill the page */
+#ifdef CONFIG_F2FS_FS_COMPRESSION
+	if (!need_alloc) {
+		set_new_dnode(&dn, inode, NULL, NULL, 0);
+		err = f2fs_get_dnode_of_data(&dn, page->index, LOOKUP_NODE);
+		f2fs_put_dnode(&dn);
+	}
+#endif
+	if (err) {
+		unlock_page(page);
+		goto out_sem;
+	}
+
 	f2fs_wait_on_page_writeback(page, DATA, false, true);
 
 	/* wait for GCed page writeback via META_MAPPING */
@@ -448,8 +455,7 @@ static loff_t f2fs_seek_block(struct file *file, loff_t offset, int whence)
 				data_ofs = (loff_t)pgofs << PAGE_SHIFT) {
 			block_t blkaddr;
 
-			blkaddr = datablock_addr(dn.inode,
-					dn.node_page, dn.ofs_in_node);
+			blkaddr = f2fs_data_blkaddr(&dn);
 
 			if (__is_valid_data_blkaddr(blkaddr) &&
 				!f2fs_is_valid_blkaddr(F2FS_I_SB(inode),
@@ -793,6 +799,8 @@ int f2fs_getattr(const struct path *path, struct kstat *stat,
 	}
 
 	flags = fi->i_flags;
+	if (flags & F2FS_COMPR_FL)
+		stat->attributes |= STATX_ATTR_COMPRESSED;
 	if (flags & F2FS_APPEND_FL)
 		stat->attributes |= STATX_ATTR_APPEND;
 	if (IS_ENCRYPTED(inode))
@@ -804,7 +812,8 @@ int f2fs_getattr(const struct path *path, struct kstat *stat,
 	if (IS_VERITY(inode))
 		stat->attributes |= STATX_ATTR_VERITY;
 
-	stat->attributes_mask |= (STATX_ATTR_APPEND |
+	stat->attributes_mask |= (STATX_ATTR_COMPRESSED |
+				  STATX_ATTR_APPEND |
 				  STATX_ATTR_ENCRYPTED |
 				  STATX_ATTR_IMMUTABLE |
 				  STATX_ATTR_NODUMP |
@@ -929,10 +938,10 @@ int f2fs_setattr(struct dentry *dentry, struct iattr *attr)
 		if (err)
 			return err;
 
-		down_write(&F2FS_I(inode)->i_sem);
+		spin_lock(&F2FS_I(inode)->i_size_lock);
 		inode->i_mtime = inode->i_ctime = current_time(inode);
 		F2FS_I(inode)->last_disk_size = i_size_read(inode);
-		up_write(&F2FS_I(inode)->i_sem);
+		spin_unlock(&F2FS_I(inode)->i_size_lock);
 	}
 
 	__setattr_copy(inode, attr);
@@ -1109,8 +1118,7 @@ static int __read_out_blkaddrs(struct inode *inode, block_t *blkaddr,
 	done = min((pgoff_t)ADDRS_PER_PAGE(dn.node_page, inode) -
 							dn.ofs_in_node, len);
 	for (i = 0; i < done; i++, blkaddr++, do_replace++, dn.ofs_in_node++) {
-		*blkaddr = datablock_addr(dn.inode,
-					dn.node_page, dn.ofs_in_node);
+		*blkaddr = f2fs_data_blkaddr(&dn);
 
 		if (__is_valid_data_blkaddr(*blkaddr) &&
 			!f2fs_is_valid_blkaddr(sbi, *blkaddr,
@@ -1121,7 +1129,7 @@ static int __read_out_blkaddrs(struct inode *inode, block_t *blkaddr,
 
 		if (!f2fs_is_checkpointed_data(sbi, *blkaddr)) {
 
-			if (test_opt(sbi, LFS)) {
+			if (f2fs_lfs_mode(sbi)) {
 				f2fs_put_dnode(&dn);
 				return -EOPNOTSUPP;
 			}
@@ -1199,8 +1207,7 @@ static int __clone_blkaddrs(struct inode *src_inode, struct inode *dst_inode,
 				ADDRS_PER_PAGE(dn.node_page, dst_inode) -
 						dn.ofs_in_node, len - i);
 			do {
-				dn.data_blkaddr = datablock_addr(dn.inode,
-						dn.node_page, dn.ofs_in_node);
+				dn.data_blkaddr = f2fs_data_blkaddr(&dn);
 				f2fs_truncate_data_blocks_range(&dn, 1);
 
 				if (do_replace[i]) {
@@ -1376,8 +1383,7 @@ static int f2fs_do_zero_range(struct dnode_of_data *dn, pgoff_t start,
 	int ret;
 
 	for (; index < end; index++, dn->ofs_in_node++) {
-		if (datablock_addr(dn->inode, dn->node_page,
-					dn->ofs_in_node) == NULL_ADDR)
+		if (f2fs_data_blkaddr(dn) == NULL_ADDR)
 			count++;
 	}
 
@@ -1388,8 +1394,7 @@ static int f2fs_do_zero_range(struct dnode_of_data *dn, pgoff_t start,
 
 	dn->ofs_in_node = ofs_in_node;
 	for (index = start; index < end; index++, dn->ofs_in_node++) {
-		dn->data_blkaddr = datablock_addr(dn->inode,
-					dn->node_page, dn->ofs_in_node);
+		dn->data_blkaddr = f2fs_data_blkaddr(dn);
 		/*
 		 * f2fs_reserve_new_blocks will not guarantee entire block
 		 * allocation.
@@ -1787,12 +1792,15 @@ static int f2fs_file_flush(struct file *file, fl_owner_t id)
 static int f2fs_setflags_common(struct inode *inode, u32 iflags, u32 mask)
 {
 	struct f2fs_inode_info *fi = F2FS_I(inode);
+	u32 masked_flags = fi->i_flags & mask;
+
+	f2fs_bug_on(F2FS_I_SB(inode), (iflags & ~mask));
 
 	/* Is it quota file? Do not allow user to mess with it */
 	if (IS_NOQUOTA(inode))
 		return -EPERM;
 
-	if ((iflags ^ fi->i_flags) & F2FS_CASEFOLD_FL) {
+	if ((iflags ^ masked_flags) & F2FS_CASEFOLD_FL) {
 		if (!f2fs_sb_has_casefold(F2FS_I_SB(inode)))
 			return -EOPNOTSUPP;
 		if (!f2fs_empty_dir(inode))
@@ -1806,27 +1814,22 @@ static int f2fs_setflags_common(struct inode *inode, u32 iflags, u32 mask)
 			return -EINVAL;
 	}
 
-	if ((iflags ^ fi->i_flags) & F2FS_COMPR_FL) {
-		if (S_ISREG(inode->i_mode) &&
-			(fi->i_flags & F2FS_COMPR_FL || i_size_read(inode) ||
-						F2FS_HAS_BLOCKS(inode)))
-			return -EINVAL;
+	if ((iflags ^ masked_flags) & F2FS_COMPR_FL) {
+		if (masked_flags & F2FS_COMPR_FL) {
+			if (f2fs_disable_compressed_file(inode))
+				return -EINVAL;
+		}
 		if (iflags & F2FS_NOCOMP_FL)
 			return -EINVAL;
 		if (iflags & F2FS_COMPR_FL) {
-			int err = f2fs_convert_inline_inode(inode);
-
-			if (err)
-				return err;
-
 			if (!f2fs_may_compress(inode))
 				return -EINVAL;
 
 			set_compress_context(inode);
 		}
 	}
-	if ((iflags ^ fi->i_flags) & F2FS_NOCOMP_FL) {
-		if (fi->i_flags & F2FS_COMPR_FL)
+	if ((iflags ^ masked_flags) & F2FS_NOCOMP_FL) {
+		if (masked_flags & F2FS_COMPR_FL)
 			return -EINVAL;
 	}
 
@@ -3401,6 +3404,21 @@ static int f2fs_set_volume_name(struct file *filp, unsigned long arg)
 	return err;
 }
 
+static int f2fs_get_compress_blocks(struct file *filp, unsigned long arg)
+{
+	struct inode *inode = file_inode(filp);
+	__u64 blocks;
+
+	if (!f2fs_sb_has_compression(F2FS_I_SB(inode)))
+		return -EOPNOTSUPP;
+
+	if (!f2fs_compressed_file(inode))
+		return -EINVAL;
+
+	blocks = F2FS_I(inode)->i_compr_blocks;
+	return put_user(blocks, (u64 __user *)arg);
+}
+
 long f2fs_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 {
 	if (unlikely(f2fs_cp_error(F2FS_I_SB(file_inode(filp)))))
@@ -3481,6 +3499,8 @@ long f2fs_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 		return f2fs_get_volume_name(filp, arg);
 	case F2FS_IOC_SET_VOLUME_NAME:
 		return f2fs_set_volume_name(filp, arg);
+	case F2FS_IOC_GET_COMPRESS_BLOCKS:
+		return f2fs_get_compress_blocks(filp, arg);
 	default:
 		return -ENOTTY;
 	}
@@ -3508,8 +3528,10 @@ static ssize_t f2fs_file_write_iter(struct kiocb *iocb, struct iov_iter *from)
 		goto out;
 	}
 
-	if (!f2fs_is_compress_backend_ready(inode))
-		return -EOPNOTSUPP;
+	if (!f2fs_is_compress_backend_ready(inode)) {
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
 
 	if (iocb->ki_flags & IOCB_NOWAIT) {
 		if (!inode_trylock(inode)) {
@@ -3639,6 +3661,7 @@ long f2fs_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	case FS_IOC_MEASURE_VERITY:
 	case F2FS_IOC_GET_VOLUME_NAME:
 	case F2FS_IOC_SET_VOLUME_NAME:
+	case F2FS_IOC_GET_COMPRESS_BLOCKS:
 		break;
 	default:
 		return -ENOIOCTLCMD;
diff --git a/fs/f2fs/gc.c b/fs/f2fs/gc.c
index db8725d..26248c8 100644
--- a/fs/f2fs/gc.c
+++ b/fs/f2fs/gc.c
@@ -31,6 +31,8 @@ static int gc_thread_func(void *data)
 
 	set_freezable();
 	do {
+		bool sync_mode;
+
 		wait_event_interruptible_timeout(*wq,
 				kthread_should_stop() || freezing(current) ||
 				gc_th->gc_wake,
@@ -101,15 +103,17 @@ static int gc_thread_func(void *data)
 do_gc:
 		stat_inc_bggc_count(sbi->stat_info);
 
+		sync_mode = F2FS_OPTION(sbi).bggc_mode == BGGC_MODE_SYNC;
+
 		/* if return value is not zero, no victim was selected */
-		if (f2fs_gc(sbi, test_opt(sbi, FORCE_FG_GC), true, NULL_SEGNO))
+		if (f2fs_gc(sbi, sync_mode, true, NULL_SEGNO))
 			wait_ms = gc_th->no_gc_sleep_time;
 
 		trace_f2fs_background_gc(sbi->sb, wait_ms,
 				prefree_segments(sbi), free_segments(sbi));
 
 		/* balancing f2fs's metadata periodically */
-		f2fs_balance_fs_bg(sbi);
+		f2fs_balance_fs_bg(sbi, true);
 next:
 		sb_end_write(sbi->sb);
 
@@ -192,7 +196,10 @@ static void select_policy(struct f2fs_sb_info *sbi, int gc_type,
 		p->ofs_unit = sbi->segs_per_sec;
 	}
 
-	/* we need to check every dirty segments in the FG_GC case */
+	/*
+	 * adjust candidates range, should select all dirty segments for
+	 * foreground GC and urgent GC cases.
+	 */
 	if (gc_type != FG_GC &&
 			(sbi->gc_mode != GC_URGENT) &&
 			p->max_search > sbi->max_victim_search)
@@ -634,7 +641,7 @@ static bool is_alive(struct f2fs_sb_info *sbi, struct f2fs_summary *sum,
 	}
 
 	*nofs = ofs_of_node(node_page);
-	source_blkaddr = datablock_addr(NULL, node_page, ofs_in_node);
+	source_blkaddr = data_blkaddr(NULL, node_page, ofs_in_node);
 	f2fs_put_page(node_page, 1);
 
 	if (source_blkaddr != blkaddr) {
@@ -762,7 +769,7 @@ static int move_data_block(struct inode *inode, block_t bidx,
 	struct page *page, *mpage;
 	block_t newaddr;
 	int err = 0;
-	bool lfs_mode = test_opt(fio.sbi, LFS);
+	bool lfs_mode = f2fs_lfs_mode(fio.sbi);
 
 	/* do not read out */
 	page = f2fs_grab_cache_page(inode->i_mapping, bidx, false);
@@ -970,7 +977,8 @@ static int move_data_page(struct inode *inode, block_t bidx, int gc_type,
 		if (err) {
 			clear_cold_data(page);
 			if (err == -ENOMEM) {
-				congestion_wait(BLK_RW_ASYNC, HZ/50);
+				congestion_wait(BLK_RW_ASYNC,
+						DEFAULT_IO_TIMEOUT);
 				goto retry;
 			}
 			if (is_dirty)
@@ -1018,8 +1026,8 @@ static int gc_data_segment(struct f2fs_sb_info *sbi, struct f2fs_summary *sum,
 		 * race condition along with SSR block allocation.
 		 */
 		if ((gc_type == BG_GC && has_not_enough_free_secs(sbi, 0, 0)) ||
-				get_valid_blocks(sbi, segno, false) ==
-							sbi->blocks_per_seg)
+				get_valid_blocks(sbi, segno, true) ==
+							BLKS_PER_SEC(sbi))
 			return submitted;
 
 		if (check_valid_map(sbi, segno, off) == 0)
@@ -1203,7 +1211,7 @@ static int do_garbage_collect(struct f2fs_sb_info *sbi,
 
 		if (get_valid_blocks(sbi, segno, false) == 0)
 			goto freed;
-		if (__is_large_section(sbi) &&
+		if (gc_type == BG_GC && __is_large_section(sbi) &&
 				migrated >= sbi->migration_granularity)
 			goto skip;
 		if (!PageUptodate(sum_page) || unlikely(f2fs_cp_error(sbi)))
@@ -1233,12 +1241,12 @@ static int do_garbage_collect(struct f2fs_sb_info *sbi,
 							segno, gc_type);
 
 		stat_inc_seg_count(sbi, type, gc_type);
+		migrated++;
 
 freed:
 		if (gc_type == FG_GC &&
 				get_valid_blocks(sbi, segno, false) == 0)
 			seg_freed++;
-		migrated++;
 
 		if (__is_large_section(sbi) && segno + 1 < end_segno)
 			sbi->next_victim_seg[gc_type] = segno + 1;
@@ -1434,12 +1442,19 @@ static int free_segment_range(struct f2fs_sb_info *sbi, unsigned int start,
 static void update_sb_metadata(struct f2fs_sb_info *sbi, int secs)
 {
 	struct f2fs_super_block *raw_sb = F2FS_RAW_SUPER(sbi);
-	int section_count = le32_to_cpu(raw_sb->section_count);
-	int segment_count = le32_to_cpu(raw_sb->segment_count);
-	int segment_count_main = le32_to_cpu(raw_sb->segment_count_main);
-	long long block_count = le64_to_cpu(raw_sb->block_count);
+	int section_count;
+	int segment_count;
+	int segment_count_main;
+	long long block_count;
 	int segs = secs * sbi->segs_per_sec;
 
+	down_write(&sbi->sb_lock);
+
+	section_count = le32_to_cpu(raw_sb->section_count);
+	segment_count = le32_to_cpu(raw_sb->segment_count);
+	segment_count_main = le32_to_cpu(raw_sb->segment_count_main);
+	block_count = le64_to_cpu(raw_sb->block_count);
+
 	raw_sb->section_count = cpu_to_le32(section_count + secs);
 	raw_sb->segment_count = cpu_to_le32(segment_count + segs);
 	raw_sb->segment_count_main = cpu_to_le32(segment_count_main + segs);
@@ -1453,6 +1468,8 @@ static void update_sb_metadata(struct f2fs_sb_info *sbi, int secs)
 		raw_sb->devs[last_dev].total_segments =
 						cpu_to_le32(dev_segs + segs);
 	}
+
+	up_write(&sbi->sb_lock);
 }
 
 static void update_fs_metadata(struct f2fs_sb_info *sbi, int secs)
@@ -1570,11 +1587,17 @@ int f2fs_resize_fs(struct f2fs_sb_info *sbi, __u64 block_count)
 		goto out;
 	}
 
+	mutex_lock(&sbi->cp_mutex);
 	update_fs_metadata(sbi, -secs);
 	clear_sbi_flag(sbi, SBI_IS_RESIZEFS);
+	set_sbi_flag(sbi, SBI_IS_DIRTY);
+	mutex_unlock(&sbi->cp_mutex);
+
 	err = f2fs_sync_fs(sbi->sb, 1);
 	if (err) {
+		mutex_lock(&sbi->cp_mutex);
 		update_fs_metadata(sbi, secs);
+		mutex_unlock(&sbi->cp_mutex);
 		update_sb_metadata(sbi, secs);
 		f2fs_commit_super(sbi, false);
 	}
diff --git a/fs/f2fs/inode.c b/fs/f2fs/inode.c
index 78c3f1d..44582a4 100644
--- a/fs/f2fs/inode.c
+++ b/fs/f2fs/inode.c
@@ -291,13 +291,30 @@ static bool sanity_check_inode(struct inode *inode, struct page *node_page)
 			fi->i_flags & F2FS_COMPR_FL &&
 			F2FS_FITS_IN_INODE(ri, fi->i_extra_isize,
 						i_log_cluster_size)) {
-		if (ri->i_compress_algorithm >= COMPRESS_MAX)
+		if (ri->i_compress_algorithm >= COMPRESS_MAX) {
+			f2fs_warn(sbi, "%s: inode (ino=%lx) has unsupported "
+				"compress algorithm: %u, run fsck to fix",
+				  __func__, inode->i_ino,
+				  ri->i_compress_algorithm);
 			return false;
-		if (le64_to_cpu(ri->i_compr_blocks) > inode->i_blocks)
+		}
+		if (le64_to_cpu(ri->i_compr_blocks) >
+				SECTOR_TO_BLOCK(inode->i_blocks)) {
+			f2fs_warn(sbi, "%s: inode (ino=%lx) has inconsistent "
+				"i_compr_blocks:%llu, i_blocks:%llu, run fsck to fix",
+				  __func__, inode->i_ino,
+				  le64_to_cpu(ri->i_compr_blocks),
+				  SECTOR_TO_BLOCK(inode->i_blocks));
 			return false;
+		}
 		if (ri->i_log_cluster_size < MIN_COMPRESS_LOG_SIZE ||
-			ri->i_log_cluster_size > MAX_COMPRESS_LOG_SIZE)
+			ri->i_log_cluster_size > MAX_COMPRESS_LOG_SIZE) {
+			f2fs_warn(sbi, "%s: inode (ino=%lx) has unsupported "
+				"log cluster size: %u, run fsck to fix",
+				  __func__, inode->i_ino,
+				  ri->i_log_cluster_size);
 			return false;
+		}
 	}
 
 	return true;
@@ -345,7 +362,7 @@ static int do_read_inode(struct inode *inode)
 	fi->i_flags = le32_to_cpu(ri->i_flags);
 	if (S_ISREG(inode->i_mode))
 		fi->i_flags &= ~F2FS_PROJINHERIT_FL;
-	fi->flags = 0;
+	bitmap_zero(fi->flags, FI_MAX);
 	fi->i_advise = ri->i_advise;
 	fi->i_pino = le32_to_cpu(ri->i_pino);
 	fi->i_dir_level = ri->i_dir_level;
@@ -518,7 +535,7 @@ struct inode *f2fs_iget_retry(struct super_block *sb, unsigned long ino)
 	inode = f2fs_iget(sb, ino);
 	if (IS_ERR(inode)) {
 		if (PTR_ERR(inode) == -ENOMEM) {
-			congestion_wait(BLK_RW_ASYNC, HZ/50);
+			congestion_wait(BLK_RW_ASYNC, DEFAULT_IO_TIMEOUT);
 			goto retry;
 		}
 	}
@@ -759,7 +776,7 @@ void f2fs_evict_inode(struct inode *inode)
 	else
 		f2fs_inode_synced(inode);
 
-	/* ino == 0, if f2fs_new_inode() was failed t*/
+	/* for the case f2fs_new_inode() was failed, .i_ino is zero, skip it */
 	if (inode->i_ino)
 		invalidate_mapping_pages(NODE_MAPPING(sbi), inode->i_ino,
 							inode->i_ino);
diff --git a/fs/f2fs/namei.c b/fs/f2fs/namei.c
index 2aa0354..f54119d 100644
--- a/fs/f2fs/namei.c
+++ b/fs/f2fs/namei.c
@@ -75,9 +75,7 @@ static struct inode *f2fs_new_inode(struct inode *dir, umode_t mode)
 
 	set_inode_flag(inode, FI_NEW_INODE);
 
-	/* If the directory encrypted, then we should encrypt the inode. */
-	if ((IS_ENCRYPTED(dir) || DUMMY_ENCRYPTION_ENABLED(sbi)) &&
-				f2fs_may_encrypt(inode))
+	if (f2fs_may_encrypt(dir, inode))
 		f2fs_set_encrypted_inode(inode);
 
 	if (f2fs_sb_has_extra_attr(sbi)) {
@@ -177,7 +175,7 @@ static inline int is_extension_exist(const unsigned char *s, const char *sub)
 }
 
 /*
- * Set multimedia files as cold files for hot/cold data separation
+ * Set file's temperature for hot/cold data separation
  */
 static inline void set_file_temperature(struct f2fs_sb_info *sbi, struct inode *inode,
 		const unsigned char *name)
@@ -876,12 +874,6 @@ static int f2fs_tmpfile(struct inode *dir, struct dentry *dentry, umode_t mode)
 	if (!f2fs_is_checkpoint_ready(sbi))
 		return -ENOSPC;
 
-	if (IS_ENCRYPTED(dir) || DUMMY_ENCRYPTION_ENABLED(sbi)) {
-		int err = fscrypt_get_encryption_info(dir);
-		if (err)
-			return err;
-	}
-
 	return __f2fs_tmpfile(dir, dentry, mode, NULL);
 }
 
diff --git a/fs/f2fs/node.c b/fs/f2fs/node.c
index 9d02cdc..ecbd6bd1 100644
--- a/fs/f2fs/node.c
+++ b/fs/f2fs/node.c
@@ -510,9 +510,6 @@ int f2fs_try_to_free_nats(struct f2fs_sb_info *sbi, int nr_shrink)
 	return nr - nr_shrink;
 }
 
-/*
- * This function always returns success
- */
 int f2fs_get_node_info(struct f2fs_sb_info *sbi, nid_t nid,
 						struct node_info *ni)
 {
@@ -716,8 +713,7 @@ static int get_node_path(struct inode *inode, long block,
 /*
  * Caller should call f2fs_put_dnode(dn).
  * Also, it should grab and release a rwsem by calling f2fs_lock_op() and
- * f2fs_unlock_op() only if ro is not set RDONLY_NODE.
- * In the case of RDONLY_NODE, we don't need to care about mutex.
+ * f2fs_unlock_op() only if mode is set with ALLOC_NODE.
  */
 int f2fs_get_dnode_of_data(struct dnode_of_data *dn, pgoff_t index, int mode)
 {
@@ -809,8 +805,7 @@ int f2fs_get_dnode_of_data(struct dnode_of_data *dn, pgoff_t index, int mode)
 	dn->nid = nids[level];
 	dn->ofs_in_node = offset[level];
 	dn->node_page = npage[level];
-	dn->data_blkaddr = datablock_addr(dn->inode,
-				dn->node_page, dn->ofs_in_node);
+	dn->data_blkaddr = f2fs_data_blkaddr(dn);
 	return 0;
 
 release_pages:
@@ -1188,8 +1183,9 @@ int f2fs_remove_inode_page(struct inode *inode)
 	}
 
 	if (unlikely(inode->i_blocks != 0 && inode->i_blocks != 8)) {
-		f2fs_warn(F2FS_I_SB(inode), "Inconsistent i_blocks, ino:%lu, iblocks:%llu",
-			  inode->i_ino, (unsigned long long)inode->i_blocks);
+		f2fs_warn(F2FS_I_SB(inode),
+			"f2fs_remove_inode_page: inconsistent i_blocks, ino:%lu, iblocks:%llu",
+			inode->i_ino, (unsigned long long)inode->i_blocks);
 		set_sbi_flag(F2FS_I_SB(inode), SBI_NEED_FSCK);
 	}
 
@@ -1562,15 +1558,16 @@ static int __write_node_page(struct page *page, bool atomic, bool *submitted,
 	if (atomic && !test_opt(sbi, NOBARRIER))
 		fio.op_flags |= REQ_PREFLUSH | REQ_FUA;
 
-	set_page_writeback(page);
-	ClearPageError(page);
-
+	/* should add to global list before clearing PAGECACHE status */
 	if (f2fs_in_warm_node_list(sbi, page)) {
 		seq = f2fs_add_fsync_node_entry(sbi, page);
 		if (seq_id)
 			*seq_id = seq;
 	}
 
+	set_page_writeback(page);
+	ClearPageError(page);
+
 	fio.old_blkaddr = ni.blk_addr;
 	f2fs_do_write_node_page(nid, &fio);
 	set_node_addr(sbi, &ni, fio.new_blkaddr, is_fsync_dnode(page));
@@ -1979,7 +1976,7 @@ static int f2fs_write_node_pages(struct address_space *mapping,
 		goto skip_write;
 
 	/* balancing f2fs's metadata in background */
-	f2fs_balance_fs_bg(sbi);
+	f2fs_balance_fs_bg(sbi, true);
 
 	/* collect a number of dirty node pages and write together */
 	if (wbc->sync_mode != WB_SYNC_ALL &&
@@ -2602,7 +2599,7 @@ int f2fs_recover_inode_page(struct f2fs_sb_info *sbi, struct page *page)
 retry:
 	ipage = f2fs_grab_cache_page(NODE_MAPPING(sbi), ino, false);
 	if (!ipage) {
-		congestion_wait(BLK_RW_ASYNC, HZ/50);
+		congestion_wait(BLK_RW_ASYNC, DEFAULT_IO_TIMEOUT);
 		goto retry;
 	}
 
@@ -3193,22 +3190,22 @@ void f2fs_destroy_node_manager(struct f2fs_sb_info *sbi)
 
 int __init f2fs_create_node_manager_caches(void)
 {
-	nat_entry_slab = f2fs_kmem_cache_create("nat_entry",
+	nat_entry_slab = f2fs_kmem_cache_create("f2fs_nat_entry",
 			sizeof(struct nat_entry));
 	if (!nat_entry_slab)
 		goto fail;
 
-	free_nid_slab = f2fs_kmem_cache_create("free_nid",
+	free_nid_slab = f2fs_kmem_cache_create("f2fs_free_nid",
 			sizeof(struct free_nid));
 	if (!free_nid_slab)
 		goto destroy_nat_entry;
 
-	nat_entry_set_slab = f2fs_kmem_cache_create("nat_entry_set",
+	nat_entry_set_slab = f2fs_kmem_cache_create("f2fs_nat_entry_set",
 			sizeof(struct nat_entry_set));
 	if (!nat_entry_set_slab)
 		goto destroy_free_nid;
 
-	fsync_node_entry_slab = f2fs_kmem_cache_create("fsync_node_entry",
+	fsync_node_entry_slab = f2fs_kmem_cache_create("f2fs_fsync_node_entry",
 			sizeof(struct fsync_node_entry));
 	if (!fsync_node_entry_slab)
 		goto destroy_nat_entry_set;
diff --git a/fs/f2fs/recovery.c b/fs/f2fs/recovery.c
index 763d5c0..dd804c0 100644
--- a/fs/f2fs/recovery.c
+++ b/fs/f2fs/recovery.c
@@ -496,8 +496,7 @@ static int check_index_in_prev_nodes(struct f2fs_sb_info *sbi,
 	return 0;
 
 truncate_out:
-	if (datablock_addr(tdn.inode, tdn.node_page,
-					tdn.ofs_in_node) == blkaddr)
+	if (f2fs_data_blkaddr(&tdn) == blkaddr)
 		f2fs_truncate_data_blocks_range(&tdn, 1);
 	if (dn->inode->i_ino == nid && !dn->inode_page_locked)
 		unlock_page(dn->inode_page);
@@ -535,7 +534,7 @@ static int do_recover_data(struct f2fs_sb_info *sbi, struct inode *inode,
 	err = f2fs_get_dnode_of_data(&dn, start, ALLOC_NODE);
 	if (err) {
 		if (err == -ENOMEM) {
-			congestion_wait(BLK_RW_ASYNC, HZ/50);
+			congestion_wait(BLK_RW_ASYNC, DEFAULT_IO_TIMEOUT);
 			goto retry_dn;
 		}
 		goto out;
@@ -560,8 +559,8 @@ static int do_recover_data(struct f2fs_sb_info *sbi, struct inode *inode,
 	for (; start < end; start++, dn.ofs_in_node++) {
 		block_t src, dest;
 
-		src = datablock_addr(dn.inode, dn.node_page, dn.ofs_in_node);
-		dest = datablock_addr(dn.inode, page, dn.ofs_in_node);
+		src = f2fs_data_blkaddr(&dn);
+		dest = data_blkaddr(dn.inode, page, dn.ofs_in_node);
 
 		if (__is_valid_data_blkaddr(src) &&
 			!f2fs_is_valid_blkaddr(sbi, src, META_POR)) {
@@ -618,7 +617,8 @@ static int do_recover_data(struct f2fs_sb_info *sbi, struct inode *inode,
 			err = check_index_in_prev_nodes(sbi, dest, &dn);
 			if (err) {
 				if (err == -ENOMEM) {
-					congestion_wait(BLK_RW_ASYNC, HZ/50);
+					congestion_wait(BLK_RW_ASYNC,
+							DEFAULT_IO_TIMEOUT);
 					goto retry_prev;
 				}
 				goto err;
diff --git a/fs/f2fs/segment.c b/fs/f2fs/segment.c
index cf0eb00..b7a9421 100644
--- a/fs/f2fs/segment.c
+++ b/fs/f2fs/segment.c
@@ -172,7 +172,7 @@ bool f2fs_need_SSR(struct f2fs_sb_info *sbi)
 	int dent_secs = get_blocktype_secs(sbi, F2FS_DIRTY_DENTS);
 	int imeta_secs = get_blocktype_secs(sbi, F2FS_DIRTY_IMETA);
 
-	if (test_opt(sbi, LFS))
+	if (f2fs_lfs_mode(sbi))
 		return false;
 	if (sbi->gc_mode == GC_URGENT)
 		return true;
@@ -245,7 +245,8 @@ static int __revoke_inmem_pages(struct inode *inode,
 								LOOKUP_NODE);
 			if (err) {
 				if (err == -ENOMEM) {
-					congestion_wait(BLK_RW_ASYNC, HZ/50);
+					congestion_wait(BLK_RW_ASYNC,
+							DEFAULT_IO_TIMEOUT);
 					cond_resched();
 					goto retry;
 				}
@@ -312,7 +313,7 @@ void f2fs_drop_inmem_pages_all(struct f2fs_sb_info *sbi, bool gc_failure)
 skip:
 		iput(inode);
 	}
-	congestion_wait(BLK_RW_ASYNC, HZ/50);
+	congestion_wait(BLK_RW_ASYNC, DEFAULT_IO_TIMEOUT);
 	cond_resched();
 	if (gc_failure) {
 		if (++looped >= count)
@@ -415,7 +416,8 @@ static int __f2fs_commit_inmem_pages(struct inode *inode)
 			err = f2fs_do_write_data_page(&fio);
 			if (err) {
 				if (err == -ENOMEM) {
-					congestion_wait(BLK_RW_ASYNC, HZ/50);
+					congestion_wait(BLK_RW_ASYNC,
+							DEFAULT_IO_TIMEOUT);
 					cond_resched();
 					goto retry;
 				}
@@ -494,7 +496,7 @@ void f2fs_balance_fs(struct f2fs_sb_info *sbi, bool need)
 
 	/* balance_fs_bg is able to be pending */
 	if (need && excess_cached_nats(sbi))
-		f2fs_balance_fs_bg(sbi);
+		f2fs_balance_fs_bg(sbi, false);
 
 	if (!f2fs_is_checkpoint_ready(sbi))
 		return;
@@ -509,7 +511,7 @@ void f2fs_balance_fs(struct f2fs_sb_info *sbi, bool need)
 	}
 }
 
-void f2fs_balance_fs_bg(struct f2fs_sb_info *sbi)
+void f2fs_balance_fs_bg(struct f2fs_sb_info *sbi, bool from_bg)
 {
 	if (unlikely(is_sbi_flag_set(sbi, SBI_POR_DOING)))
 		return;
@@ -538,7 +540,7 @@ void f2fs_balance_fs_bg(struct f2fs_sb_info *sbi)
 			excess_dirty_nats(sbi) ||
 			excess_dirty_nodes(sbi) ||
 			f2fs_time_over(sbi, CP_TIME)) {
-		if (test_opt(sbi, DATA_FLUSH)) {
+		if (test_opt(sbi, DATA_FLUSH) && from_bg) {
 			struct blk_plug plug;
 
 			mutex_lock(&sbi->flush_lock);
@@ -1078,7 +1080,7 @@ static void __init_discard_policy(struct f2fs_sb_info *sbi,
 
 	dpolicy->max_requests = DEF_MAX_DISCARD_REQUEST;
 	dpolicy->io_aware_gran = MAX_PLIST_NUM;
-	dpolicy->timeout = 0;
+	dpolicy->timeout = false;
 
 	if (discard_type == DPOLICY_BG) {
 		dpolicy->min_interval = DEF_MIN_DISCARD_ISSUE_TIME;
@@ -1103,6 +1105,7 @@ static void __init_discard_policy(struct f2fs_sb_info *sbi,
 		dpolicy->io_aware = false;
 		/* we need to issue all to keep CP_TRIMMED_FLAG */
 		dpolicy->granularity = 1;
+		dpolicy->timeout = true;
 	}
 }
 
@@ -1471,12 +1474,12 @@ static int __issue_discard_cmd(struct f2fs_sb_info *sbi,
 	int i, issued = 0;
 	bool io_interrupted = false;
 
-	if (dpolicy->timeout != 0)
-		f2fs_update_time(sbi, dpolicy->timeout);
+	if (dpolicy->timeout)
+		f2fs_update_time(sbi, UMOUNT_DISCARD_TIMEOUT);
 
 	for (i = MAX_PLIST_NUM - 1; i >= 0; i--) {
-		if (dpolicy->timeout != 0 &&
-				f2fs_time_over(sbi, dpolicy->timeout))
+		if (dpolicy->timeout &&
+				f2fs_time_over(sbi, UMOUNT_DISCARD_TIMEOUT))
 			break;
 
 		if (i + 1 < dpolicy->granularity)
@@ -1497,8 +1500,8 @@ static int __issue_discard_cmd(struct f2fs_sb_info *sbi,
 		list_for_each_entry_safe(dc, tmp, pend_list, list) {
 			f2fs_bug_on(sbi, dc->state != D_PREP);
 
-			if (dpolicy->timeout != 0 &&
-				f2fs_time_over(sbi, dpolicy->timeout))
+			if (dpolicy->timeout &&
+				f2fs_time_over(sbi, UMOUNT_DISCARD_TIMEOUT))
 				break;
 
 			if (dpolicy->io_aware && i < dpolicy->io_aware_gran &&
@@ -1677,7 +1680,6 @@ bool f2fs_issue_discard_timeout(struct f2fs_sb_info *sbi)
 
 	__init_discard_policy(sbi, &dpolicy, DPOLICY_UMOUNT,
 					dcc->discard_granularity);
-	dpolicy.timeout = UMOUNT_DISCARD_TIMEOUT;
 	__issue_discard_cmd(sbi, &dpolicy);
 	dropped = __drop_discard_cmd(sbi);
 
@@ -1940,7 +1942,7 @@ void f2fs_clear_prefree_segments(struct f2fs_sb_info *sbi,
 	unsigned int start = 0, end = -1;
 	unsigned int secno, start_segno;
 	bool force = (cpc->reason & CP_DISCARD);
-	bool need_align = test_opt(sbi, LFS) && __is_large_section(sbi);
+	bool need_align = f2fs_lfs_mode(sbi) && __is_large_section(sbi);
 
 	mutex_lock(&dirty_i->seglist_lock);
 
@@ -1972,7 +1974,7 @@ void f2fs_clear_prefree_segments(struct f2fs_sb_info *sbi,
 					(end - 1) <= cpc->trim_end)
 				continue;
 
-		if (!test_opt(sbi, LFS) || !__is_large_section(sbi)) {
+		if (!f2fs_lfs_mode(sbi) || !__is_large_section(sbi)) {
 			f2fs_issue_discard(sbi, START_BLOCK(sbi, start),
 				(end - start) << sbi->log_blocks_per_seg);
 			continue;
@@ -2801,7 +2803,7 @@ static unsigned int __issue_discard_cmd_range(struct f2fs_sb_info *sbi,
 			blk_finish_plug(&plug);
 			mutex_unlock(&dcc->cmd_lock);
 			trimmed += __wait_all_discard_cmd(sbi, NULL);
-			congestion_wait(BLK_RW_ASYNC, HZ/50);
+			congestion_wait(BLK_RW_ASYNC, DEFAULT_IO_TIMEOUT);
 			goto next;
 		}
 skip:
@@ -2830,7 +2832,7 @@ int f2fs_trim_fs(struct f2fs_sb_info *sbi, struct fstrim_range *range)
 	struct discard_policy dpolicy;
 	unsigned long long trimmed = 0;
 	int err = 0;
-	bool need_align = test_opt(sbi, LFS) && __is_large_section(sbi);
+	bool need_align = f2fs_lfs_mode(sbi) && __is_large_section(sbi);
 
 	if (start >= MAX_BLKADDR(sbi) || range->len < sbi->blocksize)
 		return -EINVAL;
@@ -3193,7 +3195,7 @@ static void update_device_state(struct f2fs_io_info *fio)
 static void do_write_page(struct f2fs_summary *sum, struct f2fs_io_info *fio)
 {
 	int type = __get_segment_type(fio);
-	bool keep_order = (test_opt(fio->sbi, LFS) && type == CURSEG_COLD_DATA);
+	bool keep_order = (f2fs_lfs_mode(fio->sbi) && type == CURSEG_COLD_DATA);
 
 	if (keep_order)
 		down_read(&fio->sbi->io_order_lock);
@@ -4071,7 +4073,7 @@ static int build_sit_info(struct f2fs_sb_info *sbi)
 	sit_i->dirty_sentries = 0;
 	sit_i->sents_per_block = SIT_ENTRY_PER_BLOCK;
 	sit_i->elapsed_time = le64_to_cpu(sbi->ckpt->elapsed_time);
-	sit_i->mounted_time = ktime_get_real_seconds();
+	sit_i->mounted_time = ktime_get_boottime_seconds();
 	init_rwsem(&sit_i->sentry_lock);
 	return 0;
 }
@@ -4678,7 +4680,7 @@ int f2fs_build_segment_manager(struct f2fs_sb_info *sbi)
 	if (sm_info->rec_prefree_segments > DEF_MAX_RECLAIM_PREFREE_SEGMENTS)
 		sm_info->rec_prefree_segments = DEF_MAX_RECLAIM_PREFREE_SEGMENTS;
 
-	if (!test_opt(sbi, LFS))
+	if (!f2fs_lfs_mode(sbi))
 		sm_info->ipu_policy = 1 << F2FS_IPU_FSYNC;
 	sm_info->min_ipu_util = DEF_MIN_IPU_UTIL;
 	sm_info->min_fsync_blocks = DEF_MIN_FSYNC_BLOCKS;
@@ -4830,22 +4832,22 @@ void f2fs_destroy_segment_manager(struct f2fs_sb_info *sbi)
 
 int __init f2fs_create_segment_manager_caches(void)
 {
-	discard_entry_slab = f2fs_kmem_cache_create("discard_entry",
+	discard_entry_slab = f2fs_kmem_cache_create("f2fs_discard_entry",
 			sizeof(struct discard_entry));
 	if (!discard_entry_slab)
 		goto fail;
 
-	discard_cmd_slab = f2fs_kmem_cache_create("discard_cmd",
+	discard_cmd_slab = f2fs_kmem_cache_create("f2fs_discard_cmd",
 			sizeof(struct discard_cmd));
 	if (!discard_cmd_slab)
 		goto destroy_discard_entry;
 
-	sit_entry_set_slab = f2fs_kmem_cache_create("sit_entry_set",
+	sit_entry_set_slab = f2fs_kmem_cache_create("f2fs_sit_entry_set",
 			sizeof(struct sit_entry_set));
 	if (!sit_entry_set_slab)
 		goto destroy_discard_cmd;
 
-	inmem_entry_slab = f2fs_kmem_cache_create("inmem_page_entry",
+	inmem_entry_slab = f2fs_kmem_cache_create("f2fs_inmem_page_entry",
 			sizeof(struct inmem_pages));
 	if (!inmem_entry_slab)
 		goto destroy_sit_entry_set;
diff --git a/fs/f2fs/segment.h b/fs/f2fs/segment.h
index 459dc39..7a83bd5 100644
--- a/fs/f2fs/segment.h
+++ b/fs/f2fs/segment.h
@@ -756,7 +756,7 @@ static inline unsigned long long get_mtime(struct f2fs_sb_info *sbi,
 						bool base_time)
 {
 	struct sit_info *sit_i = SIT_I(sbi);
-	time64_t diff, now = ktime_get_real_seconds();
+	time64_t diff, now = ktime_get_boottime_seconds();
 
 	if (now >= sit_i->mounted_time)
 		return sit_i->elapsed_time + now - sit_i->mounted_time;
diff --git a/fs/f2fs/shrinker.c b/fs/f2fs/shrinker.c
index a467aca..d66de599 100644
--- a/fs/f2fs/shrinker.c
+++ b/fs/f2fs/shrinker.c
@@ -58,7 +58,7 @@ unsigned long f2fs_shrink_count(struct shrinker *shrink,
 		/* count extent cache entries */
 		count += __count_extent_cache(sbi);
 
-		/* shrink clean nat cache entries */
+		/* count clean nat cache entries */
 		count += __count_nat_entries(sbi);
 
 		/* count free nids cache entries */
diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
index d398b2d..f2dfc21 100644
--- a/fs/f2fs/super.c
+++ b/fs/f2fs/super.c
@@ -428,14 +428,11 @@ static int parse_options(struct super_block *sb, char *options)
 			if (!name)
 				return -ENOMEM;
 			if (strlen(name) == 2 && !strncmp(name, "on", 2)) {
-				set_opt(sbi, BG_GC);
-				clear_opt(sbi, FORCE_FG_GC);
+				F2FS_OPTION(sbi).bggc_mode = BGGC_MODE_ON;
 			} else if (strlen(name) == 3 && !strncmp(name, "off", 3)) {
-				clear_opt(sbi, BG_GC);
-				clear_opt(sbi, FORCE_FG_GC);
+				F2FS_OPTION(sbi).bggc_mode = BGGC_MODE_OFF;
 			} else if (strlen(name) == 4 && !strncmp(name, "sync", 4)) {
-				set_opt(sbi, BG_GC);
-				set_opt(sbi, FORCE_FG_GC);
+				F2FS_OPTION(sbi).bggc_mode = BGGC_MODE_SYNC;
 			} else {
 				kvfree(name);
 				return -EINVAL;
@@ -447,7 +444,7 @@ static int parse_options(struct super_block *sb, char *options)
 			break;
 		case Opt_norecovery:
 			/* this option mounts f2fs with ro */
-			set_opt(sbi, DISABLE_ROLL_FORWARD);
+			set_opt(sbi, NORECOVERY);
 			if (!f2fs_readonly(sb))
 				return -EINVAL;
 			break;
@@ -601,10 +598,10 @@ static int parse_options(struct super_block *sb, char *options)
 					kvfree(name);
 					return -EINVAL;
 				}
-				set_opt_mode(sbi, F2FS_MOUNT_ADAPTIVE);
+				F2FS_OPTION(sbi).fs_mode = FS_MODE_ADAPTIVE;
 			} else if (strlen(name) == 3 &&
 					!strncmp(name, "lfs", 3)) {
-				set_opt_mode(sbi, F2FS_MOUNT_LFS);
+				F2FS_OPTION(sbi).fs_mode = FS_MODE_LFS;
 			} else {
 				kvfree(name);
 				return -EINVAL;
@@ -833,6 +830,10 @@ static int parse_options(struct super_block *sb, char *options)
 					!strcmp(name, "lz4")) {
 				F2FS_OPTION(sbi).compress_algorithm =
 								COMPRESS_LZ4;
+			} else if (strlen(name) == 4 &&
+					!strcmp(name, "zstd")) {
+				F2FS_OPTION(sbi).compress_algorithm =
+								COMPRESS_ZSTD;
 			} else {
 				kfree(name);
 				return -EINVAL;
@@ -905,7 +906,7 @@ static int parse_options(struct super_block *sb, char *options)
 	}
 #endif
 
-	if (F2FS_IO_SIZE_BITS(sbi) && !test_opt(sbi, LFS)) {
+	if (F2FS_IO_SIZE_BITS(sbi) && !f2fs_lfs_mode(sbi)) {
 		f2fs_err(sbi, "Should set mode=lfs with %uKB-sized IO",
 			 F2FS_IO_SIZE_KB(sbi));
 		return -EINVAL;
@@ -935,7 +936,7 @@ static int parse_options(struct super_block *sb, char *options)
 		}
 	}
 
-	if (test_opt(sbi, DISABLE_CHECKPOINT) && test_opt(sbi, LFS)) {
+	if (test_opt(sbi, DISABLE_CHECKPOINT) && f2fs_lfs_mode(sbi)) {
 		f2fs_err(sbi, "LFS not compatible with checkpoint=disable\n");
 		return -EINVAL;
 	}
@@ -961,6 +962,7 @@ static struct inode *f2fs_alloc_inode(struct super_block *sb)
 	/* Initialize f2fs-specific inode info */
 	atomic_set(&fi->dirty_pages, 0);
 	init_rwsem(&fi->i_sem);
+	spin_lock_init(&fi->i_size_lock);
 	INIT_LIST_HEAD(&fi->dirty_list);
 	INIT_LIST_HEAD(&fi->gdirty_list);
 	INIT_LIST_HEAD(&fi->inmem_ilist);
@@ -1173,7 +1175,7 @@ static void f2fs_put_super(struct super_block *sb)
 	/* our cp_error case, we can wait for any writeback page */
 	f2fs_flush_merged_writes(sbi);
 
-	f2fs_wait_on_all_pages_writeback(sbi);
+	f2fs_wait_on_all_pages(sbi, F2FS_WB_CP_DATA);
 
 	f2fs_bug_on(sbi, sbi->fsync_node_num);
 
@@ -1205,6 +1207,7 @@ static void f2fs_put_super(struct super_block *sb)
 	kvfree(sbi->raw_super);
 
 	destroy_device_list(sbi);
+	f2fs_destroy_xattr_caches(sbi);
 	mempool_destroy(sbi->write_io_dummy);
 #ifdef CONFIG_QUOTA
 	for (i = 0; i < MAXQUOTAS; i++)
@@ -1421,6 +1424,9 @@ static inline void f2fs_show_compress_options(struct seq_file *seq,
 	case COMPRESS_LZ4:
 		algtype = "lz4";
 		break;
+	case COMPRESS_ZSTD:
+		algtype = "zstd";
+		break;
 	}
 	seq_printf(seq, ",compress_algorithm=%s", algtype);
 
@@ -1437,16 +1443,17 @@ static int f2fs_show_options(struct seq_file *seq, struct dentry *root)
 {
 	struct f2fs_sb_info *sbi = F2FS_SB(root->d_sb);
 
-	if (!f2fs_readonly(sbi->sb) && test_opt(sbi, BG_GC)) {
-		if (test_opt(sbi, FORCE_FG_GC))
-			seq_printf(seq, ",background_gc=%s", "sync");
-		else
-			seq_printf(seq, ",background_gc=%s", "on");
-	} else {
+	if (F2FS_OPTION(sbi).bggc_mode == BGGC_MODE_SYNC)
+		seq_printf(seq, ",background_gc=%s", "sync");
+	else if (F2FS_OPTION(sbi).bggc_mode == BGGC_MODE_ON)
+		seq_printf(seq, ",background_gc=%s", "on");
+	else if (F2FS_OPTION(sbi).bggc_mode == BGGC_MODE_OFF)
 		seq_printf(seq, ",background_gc=%s", "off");
-	}
+
 	if (test_opt(sbi, DISABLE_ROLL_FORWARD))
 		seq_puts(seq, ",disable_roll_forward");
+	if (test_opt(sbi, NORECOVERY))
+		seq_puts(seq, ",norecovery");
 	if (test_opt(sbi, DISCARD))
 		seq_puts(seq, ",discard");
 	else
@@ -1498,9 +1505,9 @@ static int f2fs_show_options(struct seq_file *seq, struct dentry *root)
 		seq_puts(seq, ",data_flush");
 
 	seq_puts(seq, ",mode=");
-	if (test_opt(sbi, ADAPTIVE))
+	if (F2FS_OPTION(sbi).fs_mode == FS_MODE_ADAPTIVE)
 		seq_puts(seq, "adaptive");
-	else if (test_opt(sbi, LFS))
+	else if (F2FS_OPTION(sbi).fs_mode == FS_MODE_LFS)
 		seq_puts(seq, "lfs");
 	seq_printf(seq, ",active_logs=%u", F2FS_OPTION(sbi).active_logs);
 	if (test_opt(sbi, RESERVE_ROOT))
@@ -1571,11 +1578,11 @@ static void default_options(struct f2fs_sb_info *sbi)
 	F2FS_OPTION(sbi).test_dummy_encryption = false;
 	F2FS_OPTION(sbi).s_resuid = make_kuid(&init_user_ns, F2FS_DEF_RESUID);
 	F2FS_OPTION(sbi).s_resgid = make_kgid(&init_user_ns, F2FS_DEF_RESGID);
-	F2FS_OPTION(sbi).compress_algorithm = COMPRESS_LZO;
+	F2FS_OPTION(sbi).compress_algorithm = COMPRESS_LZ4;
 	F2FS_OPTION(sbi).compress_log_size = MIN_COMPRESS_LOG_SIZE;
 	F2FS_OPTION(sbi).compress_ext_cnt = 0;
+	F2FS_OPTION(sbi).bggc_mode = BGGC_MODE_ON;
 
-	set_opt(sbi, BG_GC);
 	set_opt(sbi, INLINE_XATTR);
 	set_opt(sbi, INLINE_DATA);
 	set_opt(sbi, INLINE_DENTRY);
@@ -1587,9 +1594,9 @@ static void default_options(struct f2fs_sb_info *sbi)
 	set_opt(sbi, FLUSH_MERGE);
 	set_opt(sbi, DISCARD);
 	if (f2fs_sb_has_blkzoned(sbi))
-		set_opt_mode(sbi, F2FS_MOUNT_LFS);
+		F2FS_OPTION(sbi).fs_mode = FS_MODE_LFS;
 	else
-		set_opt_mode(sbi, F2FS_MOUNT_ADAPTIVE);
+		F2FS_OPTION(sbi).fs_mode = FS_MODE_ADAPTIVE;
 
 #ifdef CONFIG_F2FS_FS_XATTR
 	set_opt(sbi, XATTR_USER);
@@ -1658,7 +1665,7 @@ static int f2fs_disable_checkpoint(struct f2fs_sb_info *sbi)
 out_unlock:
 	up_write(&sbi->gc_lock);
 restore_flag:
-	sbi->sb->s_flags = s_flags;	/* Restore MS_RDONLY status */
+	sbi->sb->s_flags = s_flags;	/* Restore SB_RDONLY status */
 	return err;
 }
 
@@ -1781,7 +1788,8 @@ static int f2fs_remount(struct super_block *sb, int *flags, char *data)
 	 * or if background_gc = off is passed in mount
 	 * option. Also sync the filesystem.
 	 */
-	if ((*flags & SB_RDONLY) || !test_opt(sbi, BG_GC)) {
+	if ((*flags & SB_RDONLY) ||
+			F2FS_OPTION(sbi).bggc_mode == BGGC_MODE_OFF) {
 		if (sbi->gc_thread) {
 			f2fs_stop_gc_thread(sbi);
 			need_restart_gc = true;
@@ -1886,7 +1894,8 @@ static ssize_t f2fs_quota_read(struct super_block *sb, int type, char *data,
 		page = read_cache_page_gfp(mapping, blkidx, GFP_NOFS);
 		if (IS_ERR(page)) {
 			if (PTR_ERR(page) == -ENOMEM) {
-				congestion_wait(BLK_RW_ASYNC, HZ/50);
+				congestion_wait(BLK_RW_ASYNC,
+						DEFAULT_IO_TIMEOUT);
 				goto repeat;
 			}
 			set_sbi_flag(F2FS_SB(sb), SBI_QUOTA_NEED_REPAIR);
@@ -1928,6 +1937,7 @@ static ssize_t f2fs_quota_write(struct super_block *sb, int type,
 	int offset = off & (sb->s_blocksize - 1);
 	size_t towrite = len;
 	struct page *page;
+	void *fsdata = NULL;
 	char *kaddr;
 	int err = 0;
 	int tocopy;
@@ -1937,10 +1947,11 @@ static ssize_t f2fs_quota_write(struct super_block *sb, int type,
 								towrite);
 retry:
 		err = a_ops->write_begin(NULL, mapping, off, tocopy, 0,
-							&page, NULL);
+							&page, &fsdata);
 		if (unlikely(err)) {
 			if (err == -ENOMEM) {
-				congestion_wait(BLK_RW_ASYNC, HZ/50);
+				congestion_wait(BLK_RW_ASYNC,
+						DEFAULT_IO_TIMEOUT);
 				goto retry;
 			}
 			set_sbi_flag(F2FS_SB(sb), SBI_QUOTA_NEED_REPAIR);
@@ -1953,7 +1964,7 @@ static ssize_t f2fs_quota_write(struct super_block *sb, int type,
 		flush_dcache_page(page);
 
 		a_ops->write_end(NULL, mapping, off, tocopy, tocopy,
-						page, NULL);
+						page, fsdata);
 		offset = 0;
 		towrite -= tocopy;
 		off += tocopy;
@@ -3457,12 +3468,17 @@ static int f2fs_fill_super(struct super_block *sb, void *data, int silent)
 		}
 	}
 
+	/* init per sbi slab cache */
+	err = f2fs_init_xattr_caches(sbi);
+	if (err)
+		goto free_io_dummy;
+
 	/* get an inode for meta space */
 	sbi->meta_inode = f2fs_iget(sb, F2FS_META_INO(sbi));
 	if (IS_ERR(sbi->meta_inode)) {
 		f2fs_err(sbi, "Failed to read F2FS meta data inode");
 		err = PTR_ERR(sbi->meta_inode);
-		goto free_io_dummy;
+		goto free_xattr_cache;
 	}
 
 	err = f2fs_get_valid_checkpoint(sbi);
@@ -3590,7 +3606,7 @@ static int f2fs_fill_super(struct super_block *sb, void *data, int silent)
 			f2fs_err(sbi, "Cannot turn on quotas: error %d", err);
 	}
 #endif
-	/* if there are nt orphan nodes free them */
+	/* if there are any orphan inodes, free them */
 	err = f2fs_recover_orphan_inodes(sbi);
 	if (err)
 		goto free_meta;
@@ -3599,7 +3615,8 @@ static int f2fs_fill_super(struct super_block *sb, void *data, int silent)
 		goto reset_checkpoint;
 
 	/* recover fsynced data */
-	if (!test_opt(sbi, DISABLE_ROLL_FORWARD)) {
+	if (!test_opt(sbi, DISABLE_ROLL_FORWARD) &&
+			!test_opt(sbi, NORECOVERY)) {
 		/*
 		 * mount should be failed, when device has readonly mode, and
 		 * previous checkpoint was not done by clean system shutdown.
@@ -3665,7 +3682,7 @@ static int f2fs_fill_super(struct super_block *sb, void *data, int silent)
 	 * If filesystem is not mounted as read-only then
 	 * do start the gc_thread.
 	 */
-	if (test_opt(sbi, BG_GC) && !f2fs_readonly(sb)) {
+	if (F2FS_OPTION(sbi).bggc_mode != BGGC_MODE_OFF && !f2fs_readonly(sb)) {
 		/* After POR, we can run background GC thread.*/
 		err = f2fs_start_gc_thread(sbi);
 		if (err)
@@ -3734,6 +3751,8 @@ static int f2fs_fill_super(struct super_block *sb, void *data, int silent)
 	make_bad_inode(sbi->meta_inode);
 	iput(sbi->meta_inode);
 	sbi->meta_inode = NULL;
+free_xattr_cache:
+	f2fs_destroy_xattr_caches(sbi);
 free_io_dummy:
 	mempool_destroy(sbi->write_io_dummy);
 free_percpu:
diff --git a/fs/f2fs/sysfs.c b/fs/f2fs/sysfs.c
index 91d6497..e3bbbef 100644
--- a/fs/f2fs/sysfs.c
+++ b/fs/f2fs/sysfs.c
@@ -109,47 +109,47 @@ static ssize_t features_show(struct f2fs_attr *a,
 		return sprintf(buf, "0\n");
 
 	if (f2fs_sb_has_encrypt(sbi))
-		len += snprintf(buf, PAGE_SIZE - len, "%s",
+		len += scnprintf(buf, PAGE_SIZE - len, "%s",
 						"encryption");
 	if (f2fs_sb_has_blkzoned(sbi))
-		len += snprintf(buf + len, PAGE_SIZE - len, "%s%s",
+		len += scnprintf(buf + len, PAGE_SIZE - len, "%s%s",
 				len ? ", " : "", "blkzoned");
 	if (f2fs_sb_has_extra_attr(sbi))
-		len += snprintf(buf + len, PAGE_SIZE - len, "%s%s",
+		len += scnprintf(buf + len, PAGE_SIZE - len, "%s%s",
 				len ? ", " : "", "extra_attr");
 	if (f2fs_sb_has_project_quota(sbi))
-		len += snprintf(buf + len, PAGE_SIZE - len, "%s%s",
+		len += scnprintf(buf + len, PAGE_SIZE - len, "%s%s",
 				len ? ", " : "", "projquota");
 	if (f2fs_sb_has_inode_chksum(sbi))
-		len += snprintf(buf + len, PAGE_SIZE - len, "%s%s",
+		len += scnprintf(buf + len, PAGE_SIZE - len, "%s%s",
 				len ? ", " : "", "inode_checksum");
 	if (f2fs_sb_has_flexible_inline_xattr(sbi))
-		len += snprintf(buf + len, PAGE_SIZE - len, "%s%s",
+		len += scnprintf(buf + len, PAGE_SIZE - len, "%s%s",
 				len ? ", " : "", "flexible_inline_xattr");
 	if (f2fs_sb_has_quota_ino(sbi))
-		len += snprintf(buf + len, PAGE_SIZE - len, "%s%s",
+		len += scnprintf(buf + len, PAGE_SIZE - len, "%s%s",
 				len ? ", " : "", "quota_ino");
 	if (f2fs_sb_has_inode_crtime(sbi))
-		len += snprintf(buf + len, PAGE_SIZE - len, "%s%s",
+		len += scnprintf(buf + len, PAGE_SIZE - len, "%s%s",
 				len ? ", " : "", "inode_crtime");
 	if (f2fs_sb_has_lost_found(sbi))
-		len += snprintf(buf + len, PAGE_SIZE - len, "%s%s",
+		len += scnprintf(buf + len, PAGE_SIZE - len, "%s%s",
 				len ? ", " : "", "lost_found");
 	if (f2fs_sb_has_verity(sbi))
-		len += snprintf(buf + len, PAGE_SIZE - len, "%s%s",
+		len += scnprintf(buf + len, PAGE_SIZE - len, "%s%s",
 				len ? ", " : "", "verity");
 	if (f2fs_sb_has_sb_chksum(sbi))
-		len += snprintf(buf + len, PAGE_SIZE - len, "%s%s",
+		len += scnprintf(buf + len, PAGE_SIZE - len, "%s%s",
 				len ? ", " : "", "sb_checksum");
 	if (f2fs_sb_has_casefold(sbi))
-		len += snprintf(buf + len, PAGE_SIZE - len, "%s%s",
+		len += scnprintf(buf + len, PAGE_SIZE - len, "%s%s",
 				len ? ", " : "", "casefold");
 	if (f2fs_sb_has_compression(sbi))
-		len += snprintf(buf + len, PAGE_SIZE - len, "%s%s",
+		len += scnprintf(buf + len, PAGE_SIZE - len, "%s%s",
 				len ? ", " : "", "compression");
-	len += snprintf(buf + len, PAGE_SIZE - len, "%s%s",
+	len += scnprintf(buf + len, PAGE_SIZE - len, "%s%s",
 				len ? ", " : "", "pin_file");
-	len += snprintf(buf + len, PAGE_SIZE - len, "\n");
+	len += scnprintf(buf + len, PAGE_SIZE - len, "\n");
 	return len;
 }
 
@@ -185,6 +185,12 @@ static ssize_t encoding_show(struct f2fs_attr *a,
 	return sprintf(buf, "(none)");
 }
 
+static ssize_t mounted_time_sec_show(struct f2fs_attr *a,
+		struct f2fs_sb_info *sbi, char *buf)
+{
+	return sprintf(buf, "%llu", SIT_I(sbi)->mounted_time);
+}
+
 #ifdef CONFIG_F2FS_STAT_FS
 static ssize_t moved_blocks_foreground_show(struct f2fs_attr *a,
 				struct f2fs_sb_info *sbi, char *buf)
@@ -233,16 +239,16 @@ static ssize_t f2fs_sbi_show(struct f2fs_attr *a,
 		int hot_count = sbi->raw_super->hot_ext_count;
 		int len = 0, i;
 
-		len += snprintf(buf + len, PAGE_SIZE - len,
+		len += scnprintf(buf + len, PAGE_SIZE - len,
 						"cold file extension:\n");
 		for (i = 0; i < cold_count; i++)
-			len += snprintf(buf + len, PAGE_SIZE - len, "%s\n",
+			len += scnprintf(buf + len, PAGE_SIZE - len, "%s\n",
 								extlist[i]);
 
-		len += snprintf(buf + len, PAGE_SIZE - len,
+		len += scnprintf(buf + len, PAGE_SIZE - len,
 						"hot file extension:\n");
 		for (i = cold_count; i < cold_count + hot_count; i++)
-			len += snprintf(buf + len, PAGE_SIZE - len, "%s\n",
+			len += scnprintf(buf + len, PAGE_SIZE - len, "%s\n",
 								extlist[i]);
 		return len;
 	}
@@ -544,6 +550,7 @@ F2FS_GENERAL_RO_ATTR(features);
 F2FS_GENERAL_RO_ATTR(current_reserved_blocks);
 F2FS_GENERAL_RO_ATTR(unusable);
 F2FS_GENERAL_RO_ATTR(encoding);
+F2FS_GENERAL_RO_ATTR(mounted_time_sec);
 #ifdef CONFIG_F2FS_STAT_FS
 F2FS_STAT_ATTR(STAT_INFO, f2fs_stat_info, cp_foreground_calls, cp_count);
 F2FS_STAT_ATTR(STAT_INFO, f2fs_stat_info, cp_background_calls, bg_cp_count);
@@ -573,7 +580,9 @@ F2FS_FEATURE_RO_ATTR(verity, FEAT_VERITY);
 #endif
 F2FS_FEATURE_RO_ATTR(sb_checksum, FEAT_SB_CHECKSUM);
 F2FS_FEATURE_RO_ATTR(casefold, FEAT_CASEFOLD);
+#ifdef CONFIG_F2FS_FS_COMPRESSION
 F2FS_FEATURE_RO_ATTR(compression, FEAT_COMPRESSION);
+#endif
 
 #define ATTR_LIST(name) (&f2fs_attr_##name.attr)
 static struct attribute *f2fs_attrs[] = {
@@ -621,6 +630,7 @@ static struct attribute *f2fs_attrs[] = {
 	ATTR_LIST(reserved_blocks),
 	ATTR_LIST(current_reserved_blocks),
 	ATTR_LIST(encoding),
+	ATTR_LIST(mounted_time_sec),
 #ifdef CONFIG_F2FS_STAT_FS
 	ATTR_LIST(cp_foreground_calls),
 	ATTR_LIST(cp_background_calls),
@@ -654,7 +664,9 @@ static struct attribute *f2fs_feat_attrs[] = {
 #endif
 	ATTR_LIST(sb_checksum),
 	ATTR_LIST(casefold),
+#ifdef CONFIG_F2FS_FS_COMPRESSION
 	ATTR_LIST(compression),
+#endif
 	NULL,
 };
 ATTRIBUTE_GROUPS(f2fs_feat);
diff --git a/fs/f2fs/xattr.c b/fs/f2fs/xattr.c
index 296b318..4f6582e 100644
--- a/fs/f2fs/xattr.c
+++ b/fs/f2fs/xattr.c
@@ -23,6 +23,25 @@
 #include "xattr.h"
 #include "segment.h"
 
+static void *xattr_alloc(struct f2fs_sb_info *sbi, int size, bool *is_inline)
+{
+	if (likely(size == sbi->inline_xattr_slab_size)) {
+		*is_inline = true;
+		return kmem_cache_zalloc(sbi->inline_xattr_slab, GFP_NOFS);
+	}
+	*is_inline = false;
+	return f2fs_kzalloc(sbi, size, GFP_NOFS);
+}
+
+static void xattr_free(struct f2fs_sb_info *sbi, void *xattr_addr,
+							bool is_inline)
+{
+	if (is_inline)
+		kmem_cache_free(sbi->inline_xattr_slab, xattr_addr);
+	else
+		kvfree(xattr_addr);
+}
+
 static int f2fs_xattr_generic_get(const struct xattr_handler *handler,
 		struct dentry *unused, struct inode *inode,
 		const char *name, void *buffer, size_t size)
@@ -301,7 +320,8 @@ static int read_xattr_block(struct inode *inode, void *txattr_addr)
 static int lookup_all_xattrs(struct inode *inode, struct page *ipage,
 				unsigned int index, unsigned int len,
 				const char *name, struct f2fs_xattr_entry **xe,
-				void **base_addr, int *base_size)
+				void **base_addr, int *base_size,
+				bool *is_inline)
 {
 	void *cur_addr, *txattr_addr, *last_txattr_addr;
 	void *last_addr = NULL;
@@ -312,12 +332,12 @@ static int lookup_all_xattrs(struct inode *inode, struct page *ipage,
 	if (!xnid && !inline_size)
 		return -ENODATA;
 
-	*base_size = XATTR_SIZE(xnid, inode) + XATTR_PADDING_SIZE;
-	txattr_addr = f2fs_kzalloc(F2FS_I_SB(inode), *base_size, GFP_NOFS);
+	*base_size = XATTR_SIZE(inode) + XATTR_PADDING_SIZE;
+	txattr_addr = xattr_alloc(F2FS_I_SB(inode), *base_size, is_inline);
 	if (!txattr_addr)
 		return -ENOMEM;
 
-	last_txattr_addr = (void *)txattr_addr + XATTR_SIZE(xnid, inode);
+	last_txattr_addr = (void *)txattr_addr + XATTR_SIZE(inode);
 
 	/* read from inline xattr */
 	if (inline_size) {
@@ -362,7 +382,7 @@ static int lookup_all_xattrs(struct inode *inode, struct page *ipage,
 	*base_addr = txattr_addr;
 	return 0;
 out:
-	kvfree(txattr_addr);
+	xattr_free(F2FS_I_SB(inode), txattr_addr, *is_inline);
 	return err;
 }
 
@@ -499,6 +519,7 @@ int f2fs_getxattr(struct inode *inode, int index, const char *name,
 	unsigned int size, len;
 	void *base_addr = NULL;
 	int base_size;
+	bool is_inline;
 
 	if (name == NULL)
 		return -EINVAL;
@@ -509,7 +530,7 @@ int f2fs_getxattr(struct inode *inode, int index, const char *name,
 
 	down_read(&F2FS_I(inode)->i_xattr_sem);
 	error = lookup_all_xattrs(inode, ipage, index, len, name,
-				&entry, &base_addr, &base_size);
+				&entry, &base_addr, &base_size, &is_inline);
 	up_read(&F2FS_I(inode)->i_xattr_sem);
 	if (error)
 		return error;
@@ -532,14 +553,13 @@ int f2fs_getxattr(struct inode *inode, int index, const char *name,
 	}
 	error = size;
 out:
-	kvfree(base_addr);
+	xattr_free(F2FS_I_SB(inode), base_addr, is_inline);
 	return error;
 }
 
 ssize_t f2fs_listxattr(struct dentry *dentry, char *buffer, size_t buffer_size)
 {
 	struct inode *inode = d_inode(dentry);
-	nid_t xnid = F2FS_I(inode)->i_xattr_nid;
 	struct f2fs_xattr_entry *entry;
 	void *base_addr, *last_base_addr;
 	int error = 0;
@@ -551,7 +571,7 @@ ssize_t f2fs_listxattr(struct dentry *dentry, char *buffer, size_t buffer_size)
 	if (error)
 		return error;
 
-	last_base_addr = (void *)base_addr + XATTR_SIZE(xnid, inode);
+	last_base_addr = (void *)base_addr + XATTR_SIZE(inode);
 
 	list_for_each_xattr(entry, base_addr) {
 		const struct xattr_handler *handler =
@@ -609,7 +629,6 @@ static int __f2fs_setxattr(struct inode *inode, int index,
 {
 	struct f2fs_xattr_entry *here, *last;
 	void *base_addr, *last_base_addr;
-	nid_t xnid = F2FS_I(inode)->i_xattr_nid;
 	int found, newsize;
 	size_t len;
 	__u32 new_hsize;
@@ -633,7 +652,7 @@ static int __f2fs_setxattr(struct inode *inode, int index,
 	if (error)
 		return error;
 
-	last_base_addr = (void *)base_addr + XATTR_SIZE(xnid, inode);
+	last_base_addr = (void *)base_addr + XATTR_SIZE(inode);
 
 	/* find entry with wanted name. */
 	here = __find_xattr(base_addr, last_base_addr, index, len, name);
@@ -758,14 +777,34 @@ int f2fs_setxattr(struct inode *inode, int index, const char *name,
 	f2fs_balance_fs(sbi, true);
 
 	f2fs_lock_op(sbi);
-	/* protect xattr_ver */
-	down_write(&F2FS_I(inode)->i_sem);
 	down_write(&F2FS_I(inode)->i_xattr_sem);
 	err = __f2fs_setxattr(inode, index, name, value, size, ipage, flags);
 	up_write(&F2FS_I(inode)->i_xattr_sem);
-	up_write(&F2FS_I(inode)->i_sem);
 	f2fs_unlock_op(sbi);
 
 	f2fs_update_time(sbi, REQ_TIME);
 	return err;
 }
+
+int f2fs_init_xattr_caches(struct f2fs_sb_info *sbi)
+{
+	dev_t dev = sbi->sb->s_bdev->bd_dev;
+	char slab_name[32];
+
+	sprintf(slab_name, "f2fs_xattr_entry-%u:%u", MAJOR(dev), MINOR(dev));
+
+	sbi->inline_xattr_slab_size = F2FS_OPTION(sbi).inline_xattr_size *
+					sizeof(__le32) + XATTR_PADDING_SIZE;
+
+	sbi->inline_xattr_slab = f2fs_kmem_cache_create(slab_name,
+					sbi->inline_xattr_slab_size);
+	if (!sbi->inline_xattr_slab)
+		return -ENOMEM;
+
+	return 0;
+}
+
+void f2fs_destroy_xattr_caches(struct f2fs_sb_info *sbi)
+{
+	kmem_cache_destroy(sbi->inline_xattr_slab);
+}
diff --git a/fs/f2fs/xattr.h b/fs/f2fs/xattr.h
index de0c600..938fcd2 100644
--- a/fs/f2fs/xattr.h
+++ b/fs/f2fs/xattr.h
@@ -49,7 +49,7 @@ struct f2fs_xattr_entry {
 	__u8    e_name_index;
 	__u8    e_name_len;
 	__le16  e_value_size;   /* size of attribute value */
-	char    e_name[0];      /* attribute name */
+	char    e_name[];      /* attribute name */
 };
 
 #define XATTR_HDR(ptr)		((struct f2fs_xattr_header *)(ptr))
@@ -73,7 +73,8 @@ struct f2fs_xattr_entry {
 				entry = XATTR_NEXT_ENTRY(entry))
 #define VALID_XATTR_BLOCK_SIZE	(PAGE_SIZE - sizeof(struct node_footer))
 #define XATTR_PADDING_SIZE	(sizeof(__u32))
-#define XATTR_SIZE(x,i)		(((x) ? VALID_XATTR_BLOCK_SIZE : 0) +	\
+#define XATTR_SIZE(i)		((F2FS_I(i)->i_xattr_nid ?		\
+					VALID_XATTR_BLOCK_SIZE : 0) +	\
 						(inline_xattr_size(i)))
 #define MIN_OFFSET(i)		XATTR_ALIGN(inline_xattr_size(i) +	\
 						VALID_XATTR_BLOCK_SIZE)
@@ -130,6 +131,8 @@ extern int f2fs_setxattr(struct inode *, int, const char *,
 extern int f2fs_getxattr(struct inode *, int, const char *, void *,
 						size_t, struct page *);
 extern ssize_t f2fs_listxattr(struct dentry *, char *, size_t);
+extern int f2fs_init_xattr_caches(struct f2fs_sb_info *);
+extern void f2fs_destroy_xattr_caches(struct f2fs_sb_info *);
 #else
 
 #define f2fs_xattr_handlers	NULL
@@ -150,6 +153,8 @@ static inline ssize_t f2fs_listxattr(struct dentry *dentry, char *buffer,
 {
 	return -EOPNOTSUPP;
 }
+static inline int f2fs_init_xattr_caches(struct f2fs_sb_info *sbi) { return 0; }
+static inline void f2fs_destroy_xattr_caches(struct f2fs_sb_info *sbi) { }
 #endif
 
 #ifdef CONFIG_F2FS_FS_SECURITY
diff --git a/fs/filesystems.c b/fs/filesystems.c
index 77bf5f9..90b8d87 100644
--- a/fs/filesystems.c
+++ b/fs/filesystems.c
@@ -272,7 +272,9 @@ struct file_system_type *get_fs_type(const char *name)
 	fs = __get_fs_type(name, len);
 	if (!fs && (request_module("fs-%.*s", len, name) == 0)) {
 		fs = __get_fs_type(name, len);
-		WARN_ONCE(!fs, "request_module fs-%.*s succeeded, but still no fs?\n", len, name);
+		if (!fs)
+			pr_warn_once("request_module fs-%.*s succeeded, but still no fs?\n",
+				     len, name);
 	}
 
 	if (dot && fs && !(fs->fs_flags & FS_HAS_SUBTYPE)) {
diff --git a/fs/hfsplus/attributes.c b/fs/hfsplus/attributes.c
index e6d5544..eeebe80 100644
--- a/fs/hfsplus/attributes.c
+++ b/fs/hfsplus/attributes.c
@@ -292,6 +292,10 @@ static int __hfsplus_delete_attr(struct inode *inode, u32 cnid,
 		return -ENOENT;
 	}
 
+	/* Avoid btree corruption */
+	hfs_bnode_read(fd->bnode, fd->search_key,
+			fd->keyoffset, fd->keylength);
+
 	err = hfs_brec_remove(fd);
 	if (err)
 		return err;
diff --git a/fs/hostfs/hostfs_kern.c b/fs/hostfs/hostfs_kern.c
index e6b8c49..c070c0d 100644
--- a/fs/hostfs/hostfs_kern.c
+++ b/fs/hostfs/hostfs_kern.c
@@ -139,8 +139,8 @@ static char *inode_name(struct inode *ino)
 
 static char *follow_link(char *link)
 {
-	int len, n;
 	char *name, *resolved, *end;
+	int n;
 
 	name = __getname();
 	if (!name) {
@@ -164,15 +164,13 @@ static char *follow_link(char *link)
 		return name;
 
 	*(end + 1) = '\0';
-	len = strlen(link) + strlen(name) + 1;
 
-	resolved = kmalloc(len, GFP_KERNEL);
+	resolved = kasprintf(GFP_KERNEL, "%s%s", link, name);
 	if (resolved == NULL) {
 		n = -ENOMEM;
 		goto out_free;
 	}
 
-	sprintf(resolved, "%s%s", link, name);
 	__putname(name);
 	kfree(link);
 	return resolved;
@@ -921,18 +919,16 @@ static int hostfs_fill_sb_common(struct super_block *sb, void *d, int silent)
 	sb->s_d_op = &simple_dentry_operations;
 	sb->s_maxbytes = MAX_LFS_FILESIZE;
 
-	/* NULL is printed as <NULL> by sprintf: avoid that. */
+	/* NULL is printed as '(null)' by printf(): avoid that. */
 	if (req_root == NULL)
 		req_root = "";
 
 	err = -ENOMEM;
 	sb->s_fs_info = host_root_path =
-		kmalloc(strlen(root_ino) + strlen(req_root) + 2, GFP_KERNEL);
+		kasprintf(GFP_KERNEL, "%s/%s", root_ino, req_root);
 	if (host_root_path == NULL)
 		goto out;
 
-	sprintf(host_root_path, "%s/%s", root_ino, req_root);
-
 	root_inode = new_inode(sb);
 	if (!root_inode)
 		goto out;
diff --git a/fs/io-wq.c b/fs/io-wq.c
index cc5cf22..4023c98 100644
--- a/fs/io-wq.c
+++ b/fs/io-wq.c
@@ -17,6 +17,7 @@
 #include <linux/kthread.h>
 #include <linux/rculist_nulls.h>
 #include <linux/fs_struct.h>
+#include <linux/task_work.h>
 
 #include "io-wq.h"
 
@@ -716,6 +717,9 @@ static int io_wq_manager(void *data)
 	complete(&wq->done);
 
 	while (!kthread_should_stop()) {
+		if (current->task_works)
+			task_work_run();
+
 		for_each_node(node) {
 			struct io_wqe *wqe = wq->wqes[node];
 			bool fork_worker[2] = { false, false };
@@ -738,6 +742,9 @@ static int io_wq_manager(void *data)
 		schedule_timeout(HZ);
 	}
 
+	if (current->task_works)
+		task_work_run();
+
 	return 0;
 err:
 	set_bit(IO_WQ_BIT_ERROR, &wq->state);
@@ -1124,3 +1131,8 @@ void io_wq_destroy(struct io_wq *wq)
 	if (refcount_dec_and_test(&wq->use_refs))
 		__io_wq_destroy(wq);
 }
+
+struct task_struct *io_wq_get_task(struct io_wq *wq)
+{
+	return wq->manager;
+}
diff --git a/fs/io-wq.h b/fs/io-wq.h
index 3ee7356..5ba12de 100644
--- a/fs/io-wq.h
+++ b/fs/io-wq.h
@@ -136,6 +136,8 @@ typedef bool (work_cancel_fn)(struct io_wq_work *, void *);
 enum io_wq_cancel io_wq_cancel_cb(struct io_wq *wq, work_cancel_fn *cancel,
 					void *data);
 
+struct task_struct *io_wq_get_task(struct io_wq *wq);
+
 #if defined(CONFIG_IO_WQ)
 extern void io_wq_worker_sleeping(struct task_struct *);
 extern void io_wq_worker_running(struct task_struct *);
diff --git a/fs/io_uring.c b/fs/io_uring.c
index 358f97b..381d50b 100644
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -186,14 +186,23 @@ struct fixed_file_table {
 	struct file		**files;
 };
 
+struct fixed_file_ref_node {
+	struct percpu_ref		refs;
+	struct list_head		node;
+	struct list_head		file_list;
+	struct fixed_file_data		*file_data;
+	struct work_struct		work;
+};
+
 struct fixed_file_data {
 	struct fixed_file_table		*table;
 	struct io_ring_ctx		*ctx;
 
+	struct percpu_ref		*cur_refs;
 	struct percpu_ref		refs;
-	struct llist_head		put_llist;
-	struct work_struct		ref_work;
 	struct completion		done;
+	struct list_head		ref_list;
+	spinlock_t			lock;
 };
 
 struct io_buffer {
@@ -317,6 +326,8 @@ struct io_ring_ctx {
 		spinlock_t		inflight_lock;
 		struct list_head	inflight_list;
 	} ____cacheline_aligned_in_smp;
+
+	struct work_struct		exit_work;
 };
 
 /*
@@ -346,7 +357,6 @@ struct io_timeout_data {
 	struct hrtimer			timer;
 	struct timespec64		ts;
 	enum hrtimer_mode		mode;
-	u32				seq_offset;
 };
 
 struct io_accept {
@@ -374,7 +384,7 @@ struct io_timeout {
 	struct file			*file;
 	u64				addr;
 	int				flags;
-	unsigned			count;
+	u32				count;
 };
 
 struct io_rw {
@@ -497,6 +507,7 @@ enum {
 	REQ_F_FORCE_ASYNC_BIT	= IOSQE_ASYNC_BIT,
 	REQ_F_BUFFER_SELECT_BIT	= IOSQE_BUFFER_SELECT_BIT,
 
+	REQ_F_LINK_HEAD_BIT,
 	REQ_F_LINK_NEXT_BIT,
 	REQ_F_FAIL_LINK_BIT,
 	REQ_F_INFLIGHT_BIT,
@@ -532,6 +543,8 @@ enum {
 	/* IOSQE_BUFFER_SELECT */
 	REQ_F_BUFFER_SELECT	= BIT(REQ_F_BUFFER_SELECT_BIT),
 
+	/* head of a link */
+	REQ_F_LINK_HEAD		= BIT(REQ_F_LINK_HEAD_BIT),
 	/* already grabbed next link */
 	REQ_F_LINK_NEXT		= BIT(REQ_F_LINK_NEXT_BIT),
 	/* fail rest of links */
@@ -599,6 +612,7 @@ struct io_kiocb {
 	};
 
 	struct io_async_ctx		*io;
+	int				cflags;
 	bool				needs_fixed_file;
 	u8				opcode;
 
@@ -606,10 +620,8 @@ struct io_kiocb {
 	struct list_head	list;
 	unsigned int		flags;
 	refcount_t		refs;
-	union {
-		struct task_struct	*task;
-		unsigned long		fsize;
-	};
+	struct task_struct	*task;
+	unsigned long		fsize;
 	u64			user_data;
 	u32			result;
 	u32			sequence;
@@ -618,6 +630,8 @@ struct io_kiocb {
 
 	struct list_head	inflight_entry;
 
+	struct percpu_ref	*fixed_file_refs;
+
 	union {
 		/*
 		 * Only commands that never go async can use the below fields,
@@ -629,7 +643,6 @@ struct io_kiocb {
 			struct callback_head	task_work;
 			struct hlist_node	hash_node;
 			struct async_poll	*apoll;
-			int			cflags;
 		};
 		struct io_wq_work	work;
 	};
@@ -848,7 +861,6 @@ static int __io_sqe_files_update(struct io_ring_ctx *ctx,
 				 struct io_uring_files_update *ip,
 				 unsigned nr_args);
 static int io_grab_files(struct io_kiocb *req);
-static void io_ring_file_ref_flush(struct fixed_file_data *data);
 static void io_cleanup_req(struct io_kiocb *req);
 static int io_file_get(struct io_submit_state *state, struct io_kiocb *req,
 		       int fd, struct file **out_file, bool fixed);
@@ -945,8 +957,8 @@ static inline bool __req_need_defer(struct io_kiocb *req)
 {
 	struct io_ring_ctx *ctx = req->ctx;
 
-	return req->sequence != ctx->cached_cq_tail + ctx->cached_sq_dropped
-					+ atomic_read(&ctx->cached_cq_overflow);
+	return req->sequence != ctx->cached_cq_tail
+				+ atomic_read(&ctx->cached_cq_overflow);
 }
 
 static inline bool req_need_defer(struct io_kiocb *req)
@@ -1285,8 +1297,8 @@ static struct io_kiocb *io_get_fallback_req(struct io_ring_ctx *ctx)
 	return NULL;
 }
 
-static struct io_kiocb *io_get_req(struct io_ring_ctx *ctx,
-				   struct io_submit_state *state)
+static struct io_kiocb *io_alloc_req(struct io_ring_ctx *ctx,
+				     struct io_submit_state *state)
 {
 	gfp_t gfp = GFP_KERNEL | __GFP_NOWARN;
 	struct io_kiocb *req;
@@ -1319,41 +1331,20 @@ static struct io_kiocb *io_get_req(struct io_ring_ctx *ctx,
 		req = state->reqs[state->free_reqs];
 	}
 
-got_it:
-	req->io = NULL;
-	req->file = NULL;
-	req->ctx = ctx;
-	req->flags = 0;
-	/* one is dropped after submission, the other at completion */
-	refcount_set(&req->refs, 2);
-	req->result = 0;
-	INIT_IO_WORK(&req->work, io_wq_submit_work);
 	return req;
 fallback:
-	req = io_get_fallback_req(ctx);
-	if (req)
-		goto got_it;
-	percpu_ref_put(&ctx->refs);
-	return NULL;
+	return io_get_fallback_req(ctx);
 }
 
 static inline void io_put_file(struct io_kiocb *req, struct file *file,
 			  bool fixed)
 {
 	if (fixed)
-		percpu_ref_put(&req->ctx->file_data->refs);
+		percpu_ref_put(req->fixed_file_refs);
 	else
 		fput(file);
 }
 
-static void __io_req_do_free(struct io_kiocb *req)
-{
-	if (likely(!io_is_fallback_req(req)))
-		kmem_cache_free(req_cachep, req);
-	else
-		clear_bit_unlock(0, (unsigned long *) req->ctx->fallback_req);
-}
-
 static void __io_req_aux_free(struct io_kiocb *req)
 {
 	if (req->flags & REQ_F_NEED_CLEANUP)
@@ -1362,6 +1353,8 @@ static void __io_req_aux_free(struct io_kiocb *req)
 	kfree(req->io);
 	if (req->file)
 		io_put_file(req, req->file, (req->flags & REQ_F_FIXED_FILE));
+	if (req->task)
+		put_task_struct(req->task);
 
 	io_req_work_drop_env(req);
 }
@@ -1382,7 +1375,10 @@ static void __io_free_req(struct io_kiocb *req)
 	}
 
 	percpu_ref_put(&req->ctx->refs);
-	__io_req_do_free(req);
+	if (likely(!io_is_fallback_req(req)))
+		kmem_cache_free(req_cachep, req);
+	else
+		clear_bit_unlock(0, (unsigned long *) req->ctx->fallback_req);
 }
 
 struct req_batch {
@@ -1393,21 +1389,18 @@ struct req_batch {
 
 static void io_free_req_many(struct io_ring_ctx *ctx, struct req_batch *rb)
 {
-	int fixed_refs = rb->to_free;
-
 	if (!rb->to_free)
 		return;
 	if (rb->need_iter) {
 		int i, inflight = 0;
 		unsigned long flags;
 
-		fixed_refs = 0;
 		for (i = 0; i < rb->to_free; i++) {
 			struct io_kiocb *req = rb->reqs[i];
 
 			if (req->flags & REQ_F_FIXED_FILE) {
 				req->file = NULL;
-				fixed_refs++;
+				percpu_ref_put(req->fixed_file_refs);
 			}
 			if (req->flags & REQ_F_INFLIGHT)
 				inflight++;
@@ -1433,8 +1426,6 @@ static void io_free_req_many(struct io_ring_ctx *ctx, struct req_batch *rb)
 	}
 do_free:
 	kmem_cache_free_bulk(req_cachep, rb->to_free, rb->reqs);
-	if (fixed_refs)
-		percpu_ref_put_many(&ctx->file_data->refs, fixed_refs);
 	percpu_ref_put_many(&ctx->refs, rb->to_free);
 	rb->to_free = rb->need_iter = 0;
 }
@@ -1448,7 +1439,7 @@ static bool io_link_cancel_timeout(struct io_kiocb *req)
 	if (ret != -1) {
 		io_cqring_fill_event(req, -ECANCELED);
 		io_commit_cqring(ctx);
-		req->flags &= ~REQ_F_LINK;
+		req->flags &= ~REQ_F_LINK_HEAD;
 		io_put_req(req);
 		return true;
 	}
@@ -1484,7 +1475,7 @@ static void io_req_link_next(struct io_kiocb *req, struct io_kiocb **nxtptr)
 
 		list_del_init(&req->link_list);
 		if (!list_empty(&nxt->link_list))
-			nxt->flags |= REQ_F_LINK;
+			nxt->flags |= REQ_F_LINK_HEAD;
 		*nxtptr = nxt;
 		break;
 	}
@@ -1495,7 +1486,7 @@ static void io_req_link_next(struct io_kiocb *req, struct io_kiocb **nxtptr)
 }
 
 /*
- * Called if REQ_F_LINK is set, and we fail the head request
+ * Called if REQ_F_LINK_HEAD is set, and we fail the head request
  */
 static void io_fail_links(struct io_kiocb *req)
 {
@@ -1528,7 +1519,7 @@ static void io_fail_links(struct io_kiocb *req)
 
 static void io_req_find_next(struct io_kiocb *req, struct io_kiocb **nxt)
 {
-	if (likely(!(req->flags & REQ_F_LINK)))
+	if (likely(!(req->flags & REQ_F_LINK_HEAD)))
 		return;
 
 	/*
@@ -1680,7 +1671,7 @@ static inline unsigned int io_sqring_entries(struct io_ring_ctx *ctx)
 
 static inline bool io_req_multi_free(struct req_batch *rb, struct io_kiocb *req)
 {
-	if ((req->flags & REQ_F_LINK) || io_is_fallback_req(req))
+	if ((req->flags & REQ_F_LINK_HEAD) || io_is_fallback_req(req))
 		return false;
 
 	if (!(req->flags & REQ_F_FIXED_FILE) || req->io)
@@ -1738,11 +1729,24 @@ static void io_iopoll_complete(struct io_ring_ctx *ctx, unsigned int *nr_events,
 	io_free_req_many(ctx, &rb);
 }
 
+static void io_iopoll_queue(struct list_head *again)
+{
+	struct io_kiocb *req;
+
+	do {
+		req = list_first_entry(again, struct io_kiocb, list);
+		list_del(&req->list);
+		refcount_inc(&req->refs);
+		io_queue_async_work(req);
+	} while (!list_empty(again));
+}
+
 static int io_do_iopoll(struct io_ring_ctx *ctx, unsigned int *nr_events,
 			long min)
 {
 	struct io_kiocb *req, *tmp;
 	LIST_HEAD(done);
+	LIST_HEAD(again);
 	bool spin;
 	int ret;
 
@@ -1757,9 +1761,9 @@ static int io_do_iopoll(struct io_ring_ctx *ctx, unsigned int *nr_events,
 		struct kiocb *kiocb = &req->rw.kiocb;
 
 		/*
-		 * Move completed entries to our local list. If we find a
-		 * request that requires polling, break out and complete
-		 * the done list first, if we have entries there.
+		 * Move completed and retryable entries to our local lists.
+		 * If we find a request that requires polling, break out
+		 * and complete those lists first, if we have entries there.
 		 */
 		if (req->flags & REQ_F_IOPOLL_COMPLETED) {
 			list_move_tail(&req->list, &done);
@@ -1768,6 +1772,13 @@ static int io_do_iopoll(struct io_ring_ctx *ctx, unsigned int *nr_events,
 		if (!list_empty(&done))
 			break;
 
+		if (req->result == -EAGAIN) {
+			list_move_tail(&req->list, &again);
+			continue;
+		}
+		if (!list_empty(&again))
+			break;
+
 		ret = kiocb->ki_filp->f_op->iopoll(kiocb, spin);
 		if (ret < 0)
 			break;
@@ -1780,6 +1791,9 @@ static int io_do_iopoll(struct io_ring_ctx *ctx, unsigned int *nr_events,
 	if (!list_empty(&done))
 		io_iopoll_complete(ctx, nr_events, &done);
 
+	if (!list_empty(&again))
+		io_iopoll_queue(&again);
+
 	return ret;
 }
 
@@ -2465,8 +2479,9 @@ static void io_req_map_rw(struct io_kiocb *req, ssize_t io_size,
 	req->io->rw.iov = iovec;
 	if (!req->io->rw.iov) {
 		req->io->rw.iov = req->io->rw.fast_iov;
-		memcpy(req->io->rw.iov, fast_iov,
-			sizeof(struct iovec) * iter->nr_segs);
+		if (req->io->rw.iov != fast_iov)
+			memcpy(req->io->rw.iov, fast_iov,
+			       sizeof(struct iovec) * iter->nr_segs);
 	} else {
 		req->flags |= REQ_F_NEED_CLEANUP;
 	}
@@ -2549,7 +2564,7 @@ static int io_read(struct io_kiocb *req, bool force_nonblock)
 
 	req->result = 0;
 	io_size = ret;
-	if (req->flags & REQ_F_LINK)
+	if (req->flags & REQ_F_LINK_HEAD)
 		req->result = io_size;
 
 	/*
@@ -2640,7 +2655,7 @@ static int io_write(struct io_kiocb *req, bool force_nonblock)
 
 	req->result = 0;
 	io_size = ret;
-	if (req->flags & REQ_F_LINK)
+	if (req->flags & REQ_F_LINK_HEAD)
 		req->result = io_size;
 
 	/*
@@ -2747,7 +2762,7 @@ static bool io_splice_punt(struct file *file)
 		return false;
 	if (!io_file_supports_async(file))
 		return true;
-	return !(file->f_mode & O_NONBLOCK);
+	return !(file->f_flags & O_NONBLOCK);
 }
 
 static int io_splice(struct io_kiocb *req, bool force_nonblock)
@@ -2920,7 +2935,7 @@ static int io_openat_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
 
 	if (sqe->ioprio || sqe->buf_index)
 		return -EINVAL;
-	if (sqe->flags & IOSQE_FIXED_FILE)
+	if (req->flags & REQ_F_FIXED_FILE)
 		return -EBADF;
 	if (req->flags & REQ_F_NEED_CLEANUP)
 		return 0;
@@ -2929,6 +2944,8 @@ static int io_openat_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
 	req->open.how.mode = READ_ONCE(sqe->len);
 	fname = u64_to_user_ptr(READ_ONCE(sqe->addr));
 	req->open.how.flags = READ_ONCE(sqe->open_flags);
+	if (force_o_largefile())
+		req->open.how.flags |= O_LARGEFILE;
 
 	req->open.filename = getname(fname);
 	if (IS_ERR(req->open.filename)) {
@@ -2951,7 +2968,7 @@ static int io_openat2_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
 
 	if (sqe->ioprio || sqe->buf_index)
 		return -EINVAL;
-	if (sqe->flags & IOSQE_FIXED_FILE)
+	if (req->flags & REQ_F_FIXED_FILE)
 		return -EBADF;
 	if (req->flags & REQ_F_NEED_CLEANUP)
 		return 0;
@@ -3305,7 +3322,7 @@ static int io_statx_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
 
 	if (sqe->ioprio || sqe->buf_index)
 		return -EINVAL;
-	if (sqe->flags & IOSQE_FIXED_FILE)
+	if (req->flags & REQ_F_FIXED_FILE)
 		return -EBADF;
 	if (req->flags & REQ_F_NEED_CLEANUP)
 		return 0;
@@ -3382,7 +3399,7 @@ static int io_close_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
 	if (sqe->ioprio || sqe->off || sqe->addr || sqe->len ||
 	    sqe->rw_flags || sqe->buf_index)
 		return -EINVAL;
-	if (sqe->flags & IOSQE_FIXED_FILE)
+	if (req->flags & REQ_F_FIXED_FILE)
 		return -EBADF;
 
 	req->close.fd = READ_ONCE(sqe->fd);
@@ -3481,14 +3498,11 @@ static void __io_sync_file_range(struct io_kiocb *req)
 static void io_sync_file_range_finish(struct io_wq_work **workptr)
 {
 	struct io_kiocb *req = container_of(*workptr, struct io_kiocb, work);
-	struct io_kiocb *nxt = NULL;
 
 	if (io_req_cancelled(req))
 		return;
 	__io_sync_file_range(req);
 	io_put_req(req); /* put submission ref */
-	if (nxt)
-		io_wq_assign_next(workptr, nxt);
 }
 
 static int io_sync_file_range(struct io_kiocb *req, bool force_nonblock)
@@ -4114,6 +4128,7 @@ static int __io_async_wake(struct io_kiocb *req, struct io_poll_iocb *poll,
 			   __poll_t mask, task_work_func_t func)
 {
 	struct task_struct *tsk;
+	int ret;
 
 	/* for instances that support it check for an event match first: */
 	if (mask && !(mask & poll->events))
@@ -4127,29 +4142,70 @@ static int __io_async_wake(struct io_kiocb *req, struct io_poll_iocb *poll,
 	req->result = mask;
 	init_task_work(&req->task_work, func);
 	/*
-	 * If this fails, then the task is exiting. If that is the case, then
-	 * the exit check will ultimately cancel these work items. Hence we
-	 * don't need to check here and handle it specifically.
+	 * If this fails, then the task is exiting. Punt to one of the io-wq
+	 * threads to ensure the work gets run, we can't always rely on exit
+	 * cancelation taking care of this.
 	 */
-	task_work_add(tsk, &req->task_work, true);
+	ret = task_work_add(tsk, &req->task_work, true);
+	if (unlikely(ret)) {
+		tsk = io_wq_get_task(req->ctx->io_wq);
+		task_work_add(tsk, &req->task_work, true);
+	}
 	wake_up_process(tsk);
 	return 1;
 }
 
+static bool io_poll_rewait(struct io_kiocb *req, struct io_poll_iocb *poll)
+	__acquires(&req->ctx->completion_lock)
+{
+	struct io_ring_ctx *ctx = req->ctx;
+
+	if (!req->result && !READ_ONCE(poll->canceled)) {
+		struct poll_table_struct pt = { ._key = poll->events };
+
+		req->result = vfs_poll(req->file, &pt) & poll->events;
+	}
+
+	spin_lock_irq(&ctx->completion_lock);
+	if (!req->result && !READ_ONCE(poll->canceled)) {
+		add_wait_queue(poll->head, &poll->wait);
+		return true;
+	}
+
+	return false;
+}
+
 static void io_async_task_func(struct callback_head *cb)
 {
 	struct io_kiocb *req = container_of(cb, struct io_kiocb, task_work);
 	struct async_poll *apoll = req->apoll;
 	struct io_ring_ctx *ctx = req->ctx;
+	bool canceled;
 
 	trace_io_uring_task_run(req->ctx, req->opcode, req->user_data);
 
-	WARN_ON_ONCE(!list_empty(&req->apoll->poll.wait.entry));
-
-	if (hash_hashed(&req->hash_node)) {
-		spin_lock_irq(&ctx->completion_lock);
-		hash_del(&req->hash_node);
+	if (io_poll_rewait(req, &apoll->poll)) {
 		spin_unlock_irq(&ctx->completion_lock);
+		return;
+	}
+
+	if (hash_hashed(&req->hash_node))
+		hash_del(&req->hash_node);
+
+	canceled = READ_ONCE(apoll->poll.canceled);
+	if (canceled) {
+		io_cqring_fill_event(req, -ECANCELED);
+		io_commit_cqring(ctx);
+	}
+
+	spin_unlock_irq(&ctx->completion_lock);
+
+	if (canceled) {
+		kfree(apoll);
+		io_cqring_ev_posted(ctx);
+		req_set_fail_links(req);
+		io_put_req(req);
+		return;
 	}
 
 	/* restore ->work in case we need to retry again */
@@ -4251,10 +4307,7 @@ static bool io_arm_poll_handler(struct io_kiocb *req)
 	req->flags |= REQ_F_POLLED;
 	memcpy(&apoll->work, &req->work, sizeof(req->work));
 
-	/*
-	 * Don't need a reference here, as we're adding it to the task
-	 * task_works list. If the task exits, the list is pruned.
-	 */
+	get_task_struct(current);
 	req->task = current;
 	req->apoll = apoll;
 	INIT_HLIST_NODE(&req->hash_node);
@@ -4301,11 +4354,13 @@ static bool __io_poll_remove_one(struct io_kiocb *req,
 
 static bool io_poll_remove_one(struct io_kiocb *req)
 {
+	struct async_poll *apoll = NULL;
 	bool do_complete;
 
 	if (req->opcode == IORING_OP_POLL_ADD) {
 		do_complete = __io_poll_remove_one(req, &req->poll);
 	} else {
+		apoll = req->apoll;
 		/* non-poll requests have submit ref still */
 		do_complete = __io_poll_remove_one(req, &req->apoll->poll);
 		if (do_complete)
@@ -4314,6 +4369,14 @@ static bool io_poll_remove_one(struct io_kiocb *req)
 
 	hash_del(&req->hash_node);
 
+	if (apoll) {
+		/*
+		 * restore ->work because we need to call io_req_work_drop_env.
+		 */
+		memcpy(&req->work, &apoll->work, sizeof(req->work));
+		kfree(apoll);
+	}
+
 	if (do_complete) {
 		io_cqring_fill_event(req, -ECANCELED);
 		io_commit_cqring(req->ctx);
@@ -4328,7 +4391,7 @@ static void io_poll_remove_all(struct io_ring_ctx *ctx)
 {
 	struct hlist_node *tmp;
 	struct io_kiocb *req;
-	int i;
+	int posted = 0, i;
 
 	spin_lock_irq(&ctx->completion_lock);
 	for (i = 0; i < (1U << ctx->cancel_hash_bits); i++) {
@@ -4336,11 +4399,12 @@ static void io_poll_remove_all(struct io_ring_ctx *ctx)
 
 		list = &ctx->cancel_hash[i];
 		hlist_for_each_entry_safe(req, tmp, list, hash_node)
-			io_poll_remove_one(req);
+			posted += io_poll_remove_one(req);
 	}
 	spin_unlock_irq(&ctx->completion_lock);
 
-	io_cqring_ev_posted(ctx);
+	if (posted)
+		io_cqring_ev_posted(ctx);
 }
 
 static int io_poll_cancel(struct io_ring_ctx *ctx, __u64 sqe_addr)
@@ -4407,8 +4471,13 @@ static void io_poll_complete(struct io_kiocb *req, __poll_t mask, int error)
 static void io_poll_task_handler(struct io_kiocb *req, struct io_kiocb **nxt)
 {
 	struct io_ring_ctx *ctx = req->ctx;
+	struct io_poll_iocb *poll = &req->poll;
 
-	spin_lock_irq(&ctx->completion_lock);
+	if (io_poll_rewait(req, poll)) {
+		spin_unlock_irq(&ctx->completion_lock);
+		return;
+	}
+
 	hash_del(&req->hash_node);
 	io_poll_complete(req, req->result, 0);
 	req->flags |= REQ_F_COMP_LOCKED;
@@ -4465,10 +4534,7 @@ static int io_poll_add_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe
 	events = READ_ONCE(sqe->poll_events);
 	poll->events = demangle_poll(events) | EPOLLERR | EPOLLHUP;
 
-	/*
-	 * Don't need a reference here, as we're adding it to the task
-	 * task_works list. If the task exits, the list is pruned.
-	 */
+	get_task_struct(current);
 	req->task = current;
 	return 0;
 }
@@ -4642,11 +4708,12 @@ static int io_timeout_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe,
 
 static int io_timeout(struct io_kiocb *req)
 {
-	unsigned count;
 	struct io_ring_ctx *ctx = req->ctx;
 	struct io_timeout_data *data;
 	struct list_head *entry;
 	unsigned span = 0;
+	u32 count = req->timeout.count;
+	u32 seq = req->sequence;
 
 	data = &req->io->timeout;
 
@@ -4655,7 +4722,6 @@ static int io_timeout(struct io_kiocb *req)
 	 * timeout event to be satisfied. If it isn't set, then this is
 	 * a pure timeout request, sequence isn't used.
 	 */
-	count = req->timeout.count;
 	if (!count) {
 		req->flags |= REQ_F_TIMEOUT_NOSEQ;
 		spin_lock_irq(&ctx->completion_lock);
@@ -4663,8 +4729,7 @@ static int io_timeout(struct io_kiocb *req)
 		goto add;
 	}
 
-	req->sequence = ctx->cached_sq_head + count - 1;
-	data->seq_offset = count;
+	req->sequence = seq + count;
 
 	/*
 	 * Insertion sort, ensuring the first entry in the list is always
@@ -4673,26 +4738,26 @@ static int io_timeout(struct io_kiocb *req)
 	spin_lock_irq(&ctx->completion_lock);
 	list_for_each_prev(entry, &ctx->timeout_list) {
 		struct io_kiocb *nxt = list_entry(entry, struct io_kiocb, list);
-		unsigned nxt_sq_head;
+		unsigned nxt_seq;
 		long long tmp, tmp_nxt;
-		u32 nxt_offset = nxt->io->timeout.seq_offset;
+		u32 nxt_offset = nxt->timeout.count;
 
 		if (nxt->flags & REQ_F_TIMEOUT_NOSEQ)
 			continue;
 
 		/*
-		 * Since cached_sq_head + count - 1 can overflow, use type long
+		 * Since seq + count can overflow, use type long
 		 * long to store it.
 		 */
-		tmp = (long long)ctx->cached_sq_head + count - 1;
-		nxt_sq_head = nxt->sequence - nxt_offset + 1;
-		tmp_nxt = (long long)nxt_sq_head + nxt_offset - 1;
+		tmp = (long long)seq + count;
+		nxt_seq = nxt->sequence - nxt_offset;
+		tmp_nxt = (long long)nxt_seq + nxt_offset;
 
 		/*
 		 * cached_sq_head may overflow, and it will never overflow twice
 		 * once there is some timeout req still be valid.
 		 */
-		if (ctx->cached_sq_head < nxt_sq_head)
+		if (seq < nxt_seq)
 			tmp += UINT_MAX;
 
 		if (tmp > tmp_nxt)
@@ -5331,7 +5396,8 @@ static int io_file_get(struct io_submit_state *state, struct io_kiocb *req,
 		file = io_file_from_index(ctx, fd);
 		if (!file)
 			return -EBADF;
-		percpu_ref_get(&ctx->file_data->refs);
+		req->fixed_file_refs = ctx->file_data->cur_refs;
+		percpu_ref_get(req->fixed_file_refs);
 	} else {
 		trace_io_uring_file_get(ctx, fd);
 		file = __io_file_get(state, fd);
@@ -5344,15 +5410,10 @@ static int io_file_get(struct io_submit_state *state, struct io_kiocb *req,
 }
 
 static int io_req_set_file(struct io_submit_state *state, struct io_kiocb *req,
-			   const struct io_uring_sqe *sqe)
+			   int fd, unsigned int flags)
 {
-	unsigned flags;
-	int fd;
 	bool fixed;
 
-	flags = READ_ONCE(sqe->flags);
-	fd = READ_ONCE(sqe->fd);
-
 	if (!io_req_needs_file(req, fd))
 		return 0;
 
@@ -5457,7 +5518,7 @@ static struct io_kiocb *io_prep_linked_timeout(struct io_kiocb *req)
 {
 	struct io_kiocb *nxt;
 
-	if (!(req->flags & REQ_F_LINK))
+	if (!(req->flags & REQ_F_LINK_HEAD))
 		return NULL;
 	/* for polled retry, if flag is set, we already went through here */
 	if (req->flags & REQ_F_POLLED)
@@ -5585,53 +5646,11 @@ static inline void io_queue_link_head(struct io_kiocb *req)
 		io_queue_sqe(req, NULL);
 }
 
-#define SQE_VALID_FLAGS	(IOSQE_FIXED_FILE|IOSQE_IO_DRAIN|IOSQE_IO_LINK|	\
-				IOSQE_IO_HARDLINK | IOSQE_ASYNC | \
-				IOSQE_BUFFER_SELECT)
-
-static bool io_submit_sqe(struct io_kiocb *req, const struct io_uring_sqe *sqe,
+static int io_submit_sqe(struct io_kiocb *req, const struct io_uring_sqe *sqe,
 			  struct io_submit_state *state, struct io_kiocb **link)
 {
 	struct io_ring_ctx *ctx = req->ctx;
-	unsigned int sqe_flags;
-	int ret, id;
-
-	sqe_flags = READ_ONCE(sqe->flags);
-
-	/* enforce forwards compatibility on users */
-	if (unlikely(sqe_flags & ~SQE_VALID_FLAGS)) {
-		ret = -EINVAL;
-		goto err_req;
-	}
-
-	if ((sqe_flags & IOSQE_BUFFER_SELECT) &&
-	    !io_op_defs[req->opcode].buffer_select) {
-		ret = -EOPNOTSUPP;
-		goto err_req;
-	}
-
-	id = READ_ONCE(sqe->personality);
-	if (id) {
-		req->work.creds = idr_find(&ctx->personality_idr, id);
-		if (unlikely(!req->work.creds)) {
-			ret = -EINVAL;
-			goto err_req;
-		}
-		get_cred(req->work.creds);
-	}
-
-	/* same numerical values with corresponding REQ_F_*, safe to copy */
-	req->flags |= sqe_flags & (IOSQE_IO_DRAIN | IOSQE_IO_HARDLINK |
-					IOSQE_ASYNC | IOSQE_FIXED_FILE |
-					IOSQE_BUFFER_SELECT);
-
-	ret = io_req_set_file(state, req, sqe);
-	if (unlikely(ret)) {
-err_req:
-		io_cqring_add_event(req, ret);
-		io_double_put_req(req);
-		return false;
-	}
+	int ret;
 
 	/*
 	 * If we already have a head request, queue this one for async
@@ -5650,42 +5669,39 @@ static bool io_submit_sqe(struct io_kiocb *req, const struct io_uring_sqe *sqe,
 		 * next after the link request. The last one is done via
 		 * drain_next flag to persist the effect across calls.
 		 */
-		if (sqe_flags & IOSQE_IO_DRAIN) {
+		if (req->flags & REQ_F_IO_DRAIN) {
 			head->flags |= REQ_F_IO_DRAIN;
 			ctx->drain_next = 1;
 		}
-		if (io_alloc_async_ctx(req)) {
-			ret = -EAGAIN;
-			goto err_req;
-		}
+		if (io_alloc_async_ctx(req))
+			return -EAGAIN;
 
 		ret = io_req_defer_prep(req, sqe);
 		if (ret) {
 			/* fail even hard links since we don't submit */
 			head->flags |= REQ_F_FAIL_LINK;
-			goto err_req;
+			return ret;
 		}
 		trace_io_uring_link(ctx, req, head);
 		list_add_tail(&req->link_list, &head->link_list);
 
 		/* last request of a link, enqueue the link */
-		if (!(sqe_flags & (IOSQE_IO_LINK|IOSQE_IO_HARDLINK))) {
+		if (!(req->flags & (REQ_F_LINK | REQ_F_HARDLINK))) {
 			io_queue_link_head(head);
 			*link = NULL;
 		}
 	} else {
 		if (unlikely(ctx->drain_next)) {
 			req->flags |= REQ_F_IO_DRAIN;
-			req->ctx->drain_next = 0;
+			ctx->drain_next = 0;
 		}
-		if (sqe_flags & (IOSQE_IO_LINK|IOSQE_IO_HARDLINK)) {
-			req->flags |= REQ_F_LINK;
+		if (req->flags & (REQ_F_LINK | REQ_F_HARDLINK)) {
+			req->flags |= REQ_F_LINK_HEAD;
 			INIT_LIST_HEAD(&req->link_list);
 
-			if (io_alloc_async_ctx(req)) {
-				ret = -EAGAIN;
-				goto err_req;
-			}
+			if (io_alloc_async_ctx(req))
+				return -EAGAIN;
+
 			ret = io_req_defer_prep(req, sqe);
 			if (ret)
 				req->flags |= REQ_F_FAIL_LINK;
@@ -5695,7 +5711,7 @@ static bool io_submit_sqe(struct io_kiocb *req, const struct io_uring_sqe *sqe,
 		}
 	}
 
-	return true;
+	return 0;
 }
 
 /*
@@ -5741,8 +5757,7 @@ static void io_commit_sqring(struct io_ring_ctx *ctx)
  * used, it's important that those reads are done through READ_ONCE() to
  * prevent a re-load down the line.
  */
-static bool io_get_sqring(struct io_ring_ctx *ctx, struct io_kiocb *req,
-			  const struct io_uring_sqe **sqe_ptr)
+static const struct io_uring_sqe *io_get_sqe(struct io_ring_ctx *ctx)
 {
 	u32 *sq_array = ctx->sq_array;
 	unsigned head;
@@ -5756,35 +5771,91 @@ static bool io_get_sqring(struct io_ring_ctx *ctx, struct io_kiocb *req,
 	 *    though the application is the one updating it.
 	 */
 	head = READ_ONCE(sq_array[ctx->cached_sq_head & ctx->sq_mask]);
-	if (likely(head < ctx->sq_entries)) {
-		/*
-		 * All io need record the previous position, if LINK vs DARIN,
-		 * it can be used to mark the position of the first IO in the
-		 * link list.
-		 */
-		req->sequence = ctx->cached_sq_head;
-		*sqe_ptr = &ctx->sq_sqes[head];
-		req->opcode = READ_ONCE((*sqe_ptr)->opcode);
-		req->user_data = READ_ONCE((*sqe_ptr)->user_data);
-		ctx->cached_sq_head++;
-		return true;
-	}
+	if (likely(head < ctx->sq_entries))
+		return &ctx->sq_sqes[head];
 
 	/* drop invalid entries */
-	ctx->cached_sq_head++;
 	ctx->cached_sq_dropped++;
 	WRITE_ONCE(ctx->rings->sq_dropped, ctx->cached_sq_dropped);
-	return false;
+	return NULL;
+}
+
+static inline void io_consume_sqe(struct io_ring_ctx *ctx)
+{
+	ctx->cached_sq_head++;
+}
+
+#define SQE_VALID_FLAGS	(IOSQE_FIXED_FILE|IOSQE_IO_DRAIN|IOSQE_IO_LINK|	\
+				IOSQE_IO_HARDLINK | IOSQE_ASYNC | \
+				IOSQE_BUFFER_SELECT)
+
+static int io_init_req(struct io_ring_ctx *ctx, struct io_kiocb *req,
+		       const struct io_uring_sqe *sqe,
+		       struct io_submit_state *state, bool async)
+{
+	unsigned int sqe_flags;
+	int id, fd;
+
+	/*
+	 * All io need record the previous position, if LINK vs DARIN,
+	 * it can be used to mark the position of the first IO in the
+	 * link list.
+	 */
+	req->sequence = ctx->cached_sq_head - ctx->cached_sq_dropped;
+	req->opcode = READ_ONCE(sqe->opcode);
+	req->user_data = READ_ONCE(sqe->user_data);
+	req->io = NULL;
+	req->file = NULL;
+	req->ctx = ctx;
+	req->flags = 0;
+	/* one is dropped after submission, the other at completion */
+	refcount_set(&req->refs, 2);
+	req->task = NULL;
+	req->result = 0;
+	req->needs_fixed_file = async;
+	INIT_IO_WORK(&req->work, io_wq_submit_work);
+
+	if (unlikely(req->opcode >= IORING_OP_LAST))
+		return -EINVAL;
+
+	if (io_op_defs[req->opcode].needs_mm && !current->mm) {
+		if (unlikely(!mmget_not_zero(ctx->sqo_mm)))
+			return -EFAULT;
+		use_mm(ctx->sqo_mm);
+	}
+
+	sqe_flags = READ_ONCE(sqe->flags);
+	/* enforce forwards compatibility on users */
+	if (unlikely(sqe_flags & ~SQE_VALID_FLAGS))
+		return -EINVAL;
+
+	if ((sqe_flags & IOSQE_BUFFER_SELECT) &&
+	    !io_op_defs[req->opcode].buffer_select)
+		return -EOPNOTSUPP;
+
+	id = READ_ONCE(sqe->personality);
+	if (id) {
+		req->work.creds = idr_find(&ctx->personality_idr, id);
+		if (unlikely(!req->work.creds))
+			return -EINVAL;
+		get_cred(req->work.creds);
+	}
+
+	/* same numerical values with corresponding REQ_F_*, safe to copy */
+	req->flags |= sqe_flags & (IOSQE_IO_DRAIN | IOSQE_IO_HARDLINK |
+					IOSQE_ASYNC | IOSQE_FIXED_FILE |
+					IOSQE_BUFFER_SELECT | IOSQE_IO_LINK);
+
+	fd = READ_ONCE(sqe->fd);
+	return io_req_set_file(state, req, fd, sqe_flags);
 }
 
 static int io_submit_sqes(struct io_ring_ctx *ctx, unsigned int nr,
-			  struct file *ring_file, int ring_fd,
-			  struct mm_struct **mm, bool async)
+			  struct file *ring_file, int ring_fd, bool async)
 {
 	struct io_submit_state state, *statep = NULL;
 	struct io_kiocb *link = NULL;
 	int i, submitted = 0;
-	bool mm_fault = false;
 
 	/* if we have a backlog and couldn't flush it all, return BUSY */
 	if (test_bit(0, &ctx->sq_check_overflow)) {
@@ -5812,43 +5883,35 @@ static int io_submit_sqes(struct io_ring_ctx *ctx, unsigned int nr,
 		struct io_kiocb *req;
 		int err;
 
-		req = io_get_req(ctx, statep);
+		sqe = io_get_sqe(ctx);
+		if (unlikely(!sqe)) {
+			io_consume_sqe(ctx);
+			break;
+		}
+		req = io_alloc_req(ctx, statep);
 		if (unlikely(!req)) {
 			if (!submitted)
 				submitted = -EAGAIN;
 			break;
 		}
-		if (!io_get_sqring(ctx, req, &sqe)) {
-			__io_req_do_free(req);
-			break;
-		}
 
+		err = io_init_req(ctx, req, sqe, statep, async);
+		io_consume_sqe(ctx);
 		/* will complete beyond this point, count as submitted */
 		submitted++;
 
-		if (unlikely(req->opcode >= IORING_OP_LAST)) {
-			err = -EINVAL;
+		if (unlikely(err)) {
 fail_req:
 			io_cqring_add_event(req, err);
 			io_double_put_req(req);
 			break;
 		}
 
-		if (io_op_defs[req->opcode].needs_mm && !*mm) {
-			mm_fault = mm_fault || !mmget_not_zero(ctx->sqo_mm);
-			if (unlikely(mm_fault)) {
-				err = -EFAULT;
-				goto fail_req;
-			}
-			use_mm(ctx->sqo_mm);
-			*mm = ctx->sqo_mm;
-		}
-
-		req->needs_fixed_file = async;
 		trace_io_uring_submit_sqe(ctx, req->opcode, req->user_data,
 						true, async);
-		if (!io_submit_sqe(req, sqe, statep, &link))
-			break;
+		err = io_submit_sqe(req, sqe, statep, &link);
+		if (err)
+			goto fail_req;
 	}
 
 	if (unlikely(submitted != nr)) {
@@ -5867,10 +5930,19 @@ static int io_submit_sqes(struct io_ring_ctx *ctx, unsigned int nr,
 	return submitted;
 }
 
+static inline void io_sq_thread_drop_mm(struct io_ring_ctx *ctx)
+{
+	struct mm_struct *mm = current->mm;
+
+	if (mm) {
+		unuse_mm(mm);
+		mmput(mm);
+	}
+}
+
 static int io_sq_thread(void *data)
 {
 	struct io_ring_ctx *ctx = data;
-	struct mm_struct *cur_mm = NULL;
 	const struct cred *old_cred;
 	mm_segment_t old_fs;
 	DEFINE_WAIT(wait);
@@ -5911,11 +5983,7 @@ static int io_sq_thread(void *data)
 			 * adding ourselves to the waitqueue, as the unuse/drop
 			 * may sleep.
 			 */
-			if (cur_mm) {
-				unuse_mm(cur_mm);
-				mmput(cur_mm);
-				cur_mm = NULL;
-			}
+			io_sq_thread_drop_mm(ctx);
 
 			/*
 			 * We're polling. If we're within the defined idle
@@ -5962,6 +6030,7 @@ static int io_sq_thread(void *data)
 				}
 				if (current->task_works) {
 					task_work_run();
+					finish_wait(&ctx->sqo_wait, &wait);
 					continue;
 				}
 				if (signal_pending(current))
@@ -5978,7 +6047,7 @@ static int io_sq_thread(void *data)
 		}
 
 		mutex_lock(&ctx->uring_lock);
-		ret = io_submit_sqes(ctx, to_submit, NULL, -1, &cur_mm, true);
+		ret = io_submit_sqes(ctx, to_submit, NULL, -1, true);
 		mutex_unlock(&ctx->uring_lock);
 		timeout = jiffies + ctx->sq_thread_idle;
 	}
@@ -5987,10 +6056,7 @@ static int io_sq_thread(void *data)
 		task_work_run();
 
 	set_fs(old_fs);
-	if (cur_mm) {
-		unuse_mm(cur_mm);
-		mmput(cur_mm);
-	}
+	io_sq_thread_drop_mm(ctx);
 	revert_creds(old_cred);
 
 	kthread_parkme();
@@ -6124,43 +6190,36 @@ static void io_file_ref_kill(struct percpu_ref *ref)
 	complete(&data->done);
 }
 
-static void io_file_ref_exit_and_free(struct work_struct *work)
-{
-	struct fixed_file_data *data;
-
-	data = container_of(work, struct fixed_file_data, ref_work);
-
-	/*
-	 * Ensure any percpu-ref atomic switch callback has run, it could have
-	 * been in progress when the files were being unregistered. Once
-	 * that's done, we can safely exit and free the ref and containing
-	 * data structure.
-	 */
-	rcu_barrier();
-	percpu_ref_exit(&data->refs);
-	kfree(data);
-}
-
 static int io_sqe_files_unregister(struct io_ring_ctx *ctx)
 {
 	struct fixed_file_data *data = ctx->file_data;
+	struct fixed_file_ref_node *ref_node = NULL;
 	unsigned nr_tables, i;
+	unsigned long flags;
 
 	if (!data)
 		return -ENXIO;
 
-	percpu_ref_kill_and_confirm(&data->refs, io_file_ref_kill);
-	flush_work(&data->ref_work);
+	spin_lock_irqsave(&data->lock, flags);
+	if (!list_empty(&data->ref_list))
+		ref_node = list_first_entry(&data->ref_list,
+				struct fixed_file_ref_node, node);
+	spin_unlock_irqrestore(&data->lock, flags);
+	if (ref_node)
+		percpu_ref_kill(&ref_node->refs);
+
+	percpu_ref_kill(&data->refs);
+
+	/* wait for all refs nodes to complete */
 	wait_for_completion(&data->done);
-	io_ring_file_ref_flush(data);
 
 	__io_sqe_files_unregister(ctx);
 	nr_tables = DIV_ROUND_UP(ctx->nr_user_files, IORING_MAX_FILES_TABLE);
 	for (i = 0; i < nr_tables; i++)
 		kfree(data->table[i].files);
 	kfree(data->table);
-	INIT_WORK(&data->ref_work, io_file_ref_exit_and_free);
-	queue_work(system_wq, &data->ref_work);
+	percpu_ref_exit(&data->refs);
+	kfree(data);
 	ctx->file_data = NULL;
 	ctx->nr_user_files = 0;
 	return 0;
@@ -6204,13 +6263,6 @@ static int __io_sqe_files_scm(struct io_ring_ctx *ctx, int nr, int offset)
 	struct sk_buff *skb;
 	int i, nr_files;
 
-	if (!capable(CAP_SYS_RESOURCE) && !capable(CAP_SYS_ADMIN)) {
-		unsigned long inflight = ctx->user->unix_inflight + nr;
-
-		if (inflight > task_rlimit(current, RLIMIT_NOFILE))
-			return -EMFILE;
-	}
-
 	fpl = kzalloc(sizeof(*fpl), GFP_KERNEL);
 	if (!fpl)
 		return -ENOMEM;
@@ -6385,46 +6437,72 @@ static void io_ring_file_put(struct io_ring_ctx *ctx, struct file *file)
 }
 
 struct io_file_put {
-	struct llist_node llist;
+	struct list_head list;
 	struct file *file;
 };
 
-static void io_ring_file_ref_flush(struct fixed_file_data *data)
+static void io_file_put_work(struct work_struct *work)
 {
+	struct fixed_file_ref_node *ref_node;
+	struct fixed_file_data *file_data;
+	struct io_ring_ctx *ctx;
 	struct io_file_put *pfile, *tmp;
-	struct llist_node *node;
+	unsigned long flags;
 
-	while ((node = llist_del_all(&data->put_llist)) != NULL) {
-		llist_for_each_entry_safe(pfile, tmp, node, llist) {
-			io_ring_file_put(data->ctx, pfile->file);
-			kfree(pfile);
-		}
+	ref_node = container_of(work, struct fixed_file_ref_node, work);
+	file_data = ref_node->file_data;
+	ctx = file_data->ctx;
+
+	list_for_each_entry_safe(pfile, tmp, &ref_node->file_list, list) {
+		list_del_init(&pfile->list);
+		io_ring_file_put(ctx, pfile->file);
+		kfree(pfile);
 	}
-}
 
-static void io_ring_file_ref_switch(struct work_struct *work)
-{
-	struct fixed_file_data *data;
+	spin_lock_irqsave(&file_data->lock, flags);
+	list_del_init(&ref_node->node);
+	spin_unlock_irqrestore(&file_data->lock, flags);
 
-	data = container_of(work, struct fixed_file_data, ref_work);
-	io_ring_file_ref_flush(data);
-	percpu_ref_switch_to_percpu(&data->refs);
+	percpu_ref_exit(&ref_node->refs);
+	kfree(ref_node);
+	percpu_ref_put(&file_data->refs);
 }
 
 static void io_file_data_ref_zero(struct percpu_ref *ref)
 {
-	struct fixed_file_data *data;
+	struct fixed_file_ref_node *ref_node;
 
-	data = container_of(ref, struct fixed_file_data, refs);
+	ref_node = container_of(ref, struct fixed_file_ref_node, refs);
 
-	/*
-	 * We can't safely switch from inside this context, punt to wq. If
-	 * the table ref is going away, the table is being unregistered.
-	 * Don't queue up the async work for that case, the caller will
-	 * handle it.
-	 */
-	if (!percpu_ref_is_dying(&data->refs))
-		queue_work(system_wq, &data->ref_work);
+	queue_work(system_wq, &ref_node->work);
+}
+
+static struct fixed_file_ref_node *alloc_fixed_file_ref_node(
+			struct io_ring_ctx *ctx)
+{
+	struct fixed_file_ref_node *ref_node;
+
+	ref_node = kzalloc(sizeof(*ref_node), GFP_KERNEL);
+	if (!ref_node)
+		return ERR_PTR(-ENOMEM);
+
+	if (percpu_ref_init(&ref_node->refs, io_file_data_ref_zero,
+			    0, GFP_KERNEL)) {
+		kfree(ref_node);
+		return ERR_PTR(-ENOMEM);
+	}
+	INIT_LIST_HEAD(&ref_node->node);
+	INIT_LIST_HEAD(&ref_node->file_list);
+	INIT_WORK(&ref_node->work, io_file_put_work);
+	ref_node->file_data = ctx->file_data;
+	return ref_node;
+
+}
+
+static void destroy_fixed_file_ref_node(struct fixed_file_ref_node *ref_node)
+{
+	percpu_ref_exit(&ref_node->refs);
+	kfree(ref_node);
 }
 
 static int io_sqe_files_register(struct io_ring_ctx *ctx, void __user *arg,
@@ -6435,6 +6513,8 @@ static int io_sqe_files_register(struct io_ring_ctx *ctx, void __user *arg,
 	struct file *file;
 	int fd, ret = 0;
 	unsigned i;
+	struct fixed_file_ref_node *ref_node;
+	unsigned long flags;
 
 	if (ctx->file_data)
 		return -EBUSY;
@@ -6448,6 +6528,8 @@ static int io_sqe_files_register(struct io_ring_ctx *ctx, void __user *arg,
 		return -ENOMEM;
 	ctx->file_data->ctx = ctx;
 	init_completion(&ctx->file_data->done);
+	INIT_LIST_HEAD(&ctx->file_data->ref_list);
+	spin_lock_init(&ctx->file_data->lock);
 
 	nr_tables = DIV_ROUND_UP(nr_args, IORING_MAX_FILES_TABLE);
 	ctx->file_data->table = kcalloc(nr_tables,
@@ -6459,15 +6541,13 @@ static int io_sqe_files_register(struct io_ring_ctx *ctx, void __user *arg,
 		return -ENOMEM;
 	}
 
-	if (percpu_ref_init(&ctx->file_data->refs, io_file_data_ref_zero,
+	if (percpu_ref_init(&ctx->file_data->refs, io_file_ref_kill,
 				PERCPU_REF_ALLOW_REINIT, GFP_KERNEL)) {
 		kfree(ctx->file_data->table);
 		kfree(ctx->file_data);
 		ctx->file_data = NULL;
 		return -ENOMEM;
 	}
-	ctx->file_data->put_llist.first = NULL;
-	INIT_WORK(&ctx->file_data->ref_work, io_ring_file_ref_switch);
 
 	if (io_sqe_alloc_file_tables(ctx, nr_tables, nr_args)) {
 		percpu_ref_exit(&ctx->file_data->refs);
@@ -6530,9 +6610,22 @@ static int io_sqe_files_register(struct io_ring_ctx *ctx, void __user *arg,
 	}
 
 	ret = io_sqe_files_scm(ctx);
-	if (ret)
+	if (ret) {
 		io_sqe_files_unregister(ctx);
+		return ret;
+	}
 
+	ref_node = alloc_fixed_file_ref_node(ctx);
+	if (IS_ERR(ref_node)) {
+		io_sqe_files_unregister(ctx);
+		return PTR_ERR(ref_node);
+	}
+
+	ctx->file_data->cur_refs = &ref_node->refs;
+	spin_lock_irqsave(&ctx->file_data->lock, flags);
+	list_add(&ref_node->node, &ctx->file_data->ref_list);
+	spin_unlock_irqrestore(&ctx->file_data->lock, flags);
+	percpu_ref_get(&ctx->file_data->refs);
 	return ret;
 }
 
@@ -6579,30 +6672,21 @@ static int io_sqe_file_register(struct io_ring_ctx *ctx, struct file *file,
 #endif
 }
 
-static void io_atomic_switch(struct percpu_ref *ref)
-{
-	struct fixed_file_data *data;
-
-	/*
-	 * Juggle reference to ensure we hit zero, if needed, so we can
-	 * switch back to percpu mode
-	 */
-	data = container_of(ref, struct fixed_file_data, refs);
-	percpu_ref_put(&data->refs);
-	percpu_ref_get(&data->refs);
-}
-
 static int io_queue_file_removal(struct fixed_file_data *data,
-				  struct file *file)
+				 struct file *file)
 {
 	struct io_file_put *pfile;
+	struct percpu_ref *refs = data->cur_refs;
+	struct fixed_file_ref_node *ref_node;
 
 	pfile = kzalloc(sizeof(*pfile), GFP_KERNEL);
 	if (!pfile)
 		return -ENOMEM;
 
+	ref_node = container_of(refs, struct fixed_file_ref_node, refs);
 	pfile->file = file;
-	llist_add(&pfile->llist, &data->put_llist);
+	list_add(&pfile->list, &ref_node->file_list);
+
 	return 0;
 }
 
@@ -6611,17 +6695,23 @@ static int __io_sqe_files_update(struct io_ring_ctx *ctx,
 				 unsigned nr_args)
 {
 	struct fixed_file_data *data = ctx->file_data;
-	bool ref_switch = false;
+	struct fixed_file_ref_node *ref_node;
 	struct file *file;
 	__s32 __user *fds;
 	int fd, i, err;
 	__u32 done;
+	unsigned long flags;
+	bool needs_switch = false;
 
 	if (check_add_overflow(up->offset, nr_args, &done))
 		return -EOVERFLOW;
 	if (done > ctx->nr_user_files)
 		return -EINVAL;
 
+	ref_node = alloc_fixed_file_ref_node(ctx);
+	if (IS_ERR(ref_node))
+		return PTR_ERR(ref_node);
+
 	done = 0;
 	fds = u64_to_user_ptr(up->fds);
 	while (nr_args) {
@@ -6642,7 +6732,7 @@ static int __io_sqe_files_update(struct io_ring_ctx *ctx,
 			if (err)
 				break;
 			table->files[index] = NULL;
-			ref_switch = true;
+			needs_switch = true;
 		}
 		if (fd != -1) {
 			file = fget(fd);
@@ -6673,11 +6763,19 @@ static int __io_sqe_files_update(struct io_ring_ctx *ctx,
 		up->offset++;
 	}
 
-	if (ref_switch)
-		percpu_ref_switch_to_atomic(&data->refs, io_atomic_switch);
+	if (needs_switch) {
+		percpu_ref_kill(data->cur_refs);
+		spin_lock_irqsave(&data->lock, flags);
+		list_add(&ref_node->node, &data->ref_list);
+		data->cur_refs = &ref_node->refs;
+		spin_unlock_irqrestore(&data->lock, flags);
+		percpu_ref_get(&ctx->file_data->refs);
+	} else
+		destroy_fixed_file_ref_node(ref_node);
 
 	return done ? done : err;
 }
+
 static int io_sqe_files_update(struct io_ring_ctx *ctx, void __user *arg,
 			       unsigned nr_args)
 {
@@ -7203,6 +7301,18 @@ static int io_remove_personalities(int id, void *p, void *data)
 	return 0;
 }
 
+static void io_ring_exit_work(struct work_struct *work)
+{
+	struct io_ring_ctx *ctx;
+
+	ctx = container_of(work, struct io_ring_ctx, exit_work);
+	if (ctx->rings)
+		io_cqring_overflow_flush(ctx, true);
+
+	wait_for_completion(&ctx->completions[0]);
+	io_ring_ctx_free(ctx);
+}
+
 static void io_ring_ctx_wait_and_kill(struct io_ring_ctx *ctx)
 {
 	mutex_lock(&ctx->uring_lock);
@@ -7230,8 +7340,8 @@ static void io_ring_ctx_wait_and_kill(struct io_ring_ctx *ctx)
 	if (ctx->rings)
 		io_cqring_overflow_flush(ctx, true);
 	idr_for_each(&ctx->personality_idr, io_remove_personalities, ctx);
-	wait_for_completion(&ctx->completions[0]);
-	io_ring_ctx_free(ctx);
+	INIT_WORK(&ctx->exit_work, io_ring_exit_work);
+	queue_work(system_wq, &ctx->exit_work);
 }
 
 static int io_uring_release(struct inode *inode, struct file *file)
@@ -7427,13 +7537,8 @@ SYSCALL_DEFINE6(io_uring_enter, unsigned int, fd, u32, to_submit,
 			wake_up(&ctx->sqo_wait);
 		submitted = to_submit;
 	} else if (to_submit) {
-		struct mm_struct *cur_mm;
-
 		mutex_lock(&ctx->uring_lock);
-		/* already have mm, so io_submit_sqes() won't try to grab it */
-		cur_mm = ctx->sqo_mm;
-		submitted = io_submit_sqes(ctx, to_submit, f.file, fd,
-					   &cur_mm, false);
+		submitted = io_submit_sqes(ctx, to_submit, f.file, fd, false);
 		mutex_unlock(&ctx->uring_lock);
 
 		if (submitted != to_submit)
diff --git a/fs/iomap/buffered-io.c b/fs/iomap/buffered-io.c
index f080f54..89e2196 100644
--- a/fs/iomap/buffered-io.c
+++ b/fs/iomap/buffered-io.c
@@ -302,6 +302,7 @@ iomap_readpage_actor(struct inode *inode, loff_t pos, loff_t length, void *data,
 
 	if (!ctx->bio || !is_contig || bio_full(ctx->bio, plen)) {
 		gfp_t gfp = mapping_gfp_constraint(page->mapping, GFP_KERNEL);
+		gfp_t orig_gfp = gfp;
 		int nr_vecs = (length + PAGE_SIZE - 1) >> PAGE_SHIFT;
 
 		if (ctx->bio)
@@ -310,6 +311,13 @@ iomap_readpage_actor(struct inode *inode, loff_t pos, loff_t length, void *data,
 		if (ctx->is_readahead) /* same as readahead_gfp_mask */
 			gfp |= __GFP_NORETRY | __GFP_NOWARN;
 		ctx->bio = bio_alloc(gfp, min(BIO_MAX_PAGES, nr_vecs));
+		/*
+		 * If the bio_alloc fails, try it again for a single page to
+		 * avoid having to deal with partial page reads.  This emulates
+		 * what do_mpage_readpage does.
+		 */
+		if (!ctx->bio)
+			ctx->bio = bio_alloc(orig_gfp, 1);
 		ctx->bio->bi_opf = REQ_OP_READ;
 		if (ctx->is_readahead)
 			ctx->bio->bi_opf |= REQ_RAHEAD;
@@ -975,13 +983,6 @@ static int iomap_zero(struct inode *inode, loff_t pos, unsigned offset,
 	return iomap_write_end(inode, pos, bytes, bytes, page, iomap, srcmap);
 }
 
-static int iomap_dax_zero(loff_t pos, unsigned offset, unsigned bytes,
-		struct iomap *iomap)
-{
-	return __dax_zero_page_range(iomap->bdev, iomap->dax_dev,
-			iomap_sector(iomap, pos & PAGE_MASK), offset, bytes);
-}
-
 static loff_t
 iomap_zero_range_actor(struct inode *inode, loff_t pos, loff_t count,
 		void *data, struct iomap *iomap, struct iomap *srcmap)
@@ -1001,7 +1002,7 @@ iomap_zero_range_actor(struct inode *inode, loff_t pos, loff_t count,
 		bytes = min_t(loff_t, PAGE_SIZE - offset, count);
 
 		if (IS_DAX(inode))
-			status = iomap_dax_zero(pos, offset, bytes, iomap);
+			status = dax_iomap_zero(pos, offset, bytes, iomap);
 		else
 			status = iomap_zero(inode, pos, offset, bytes, iomap,
 					srcmap);
diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c
index 27373f5..e855d82 100644
--- a/fs/jbd2/commit.c
+++ b/fs/jbd2/commit.c
@@ -997,9 +997,10 @@ void jbd2_journal_commit_transaction(journal_t *journal)
 			 * journalled data) we need to unmap buffer and clear
 			 * more bits. We also need to be careful about the check
 			 * because the data page mapping can get cleared under
-			 * out hands, which alse need not to clear more bits
-			 * because the page and buffers will be freed and can
-			 * never be reused once we are done with them.
+			 * our hands. Note that if mapping == NULL, we don't
+			 * need to make buffer unmapped because the page is
+			 * already detached from the mapping and buffers cannot
+			 * get reused.
 			 */
 			mapping = READ_ONCE(bh->b_page->mapping);
 			if (mapping && !sb_is_blkdev_sb(mapping->host->i_sb)) {
diff --git a/fs/kernfs/inode.c b/fs/kernfs/inode.c
index d0f7a5a..fc2469a 100644
--- a/fs/kernfs/inode.c
+++ b/fs/kernfs/inode.c
@@ -53,6 +53,8 @@ static struct kernfs_iattrs *__kernfs_iattrs(struct kernfs_node *kn, int alloc)
 	kn->iattr->ia_ctime = kn->iattr->ia_atime;
 
 	simple_xattrs_init(&kn->iattr->xattrs);
+	atomic_set(&kn->iattr->nr_user_xattrs, 0);
+	atomic_set(&kn->iattr->user_xattr_size, 0);
 out_unlock:
 	ret = kn->iattr;
 	mutex_unlock(&iattr_mutex);
@@ -303,7 +305,7 @@ int kernfs_xattr_set(struct kernfs_node *kn, const char *name,
 	if (!attrs)
 		return -ENOMEM;
 
-	return simple_xattr_set(&attrs->xattrs, name, value, size, flags);
+	return simple_xattr_set(&attrs->xattrs, name, value, size, flags, NULL);
 }
 
 static int kernfs_vfs_xattr_get(const struct xattr_handler *handler,
@@ -327,6 +329,86 @@ static int kernfs_vfs_xattr_set(const struct xattr_handler *handler,
 	return kernfs_xattr_set(kn, name, value, size, flags);
 }
 
+static int kernfs_vfs_user_xattr_add(struct kernfs_node *kn,
+				     const char *full_name,
+				     struct simple_xattrs *xattrs,
+				     const void *value, size_t size, int flags)
+{
+	atomic_t *sz = &kn->iattr->user_xattr_size;
+	atomic_t *nr = &kn->iattr->nr_user_xattrs;
+	ssize_t removed_size;
+	int ret;
+
+	if (atomic_inc_return(nr) > KERNFS_MAX_USER_XATTRS) {
+		ret = -ENOSPC;
+		goto dec_count_out;
+	}
+
+	if (atomic_add_return(size, sz) > KERNFS_USER_XATTR_SIZE_LIMIT) {
+		ret = -ENOSPC;
+		goto dec_size_out;
+	}
+
+	ret = simple_xattr_set(xattrs, full_name, value, size, flags,
+			       &removed_size);
+
+	if (!ret && removed_size >= 0)
+		size = removed_size;
+	else if (!ret)
+		return 0;
+dec_size_out:
+	atomic_sub(size, sz);
+dec_count_out:
+	atomic_dec(nr);
+	return ret;
+}
+
+static int kernfs_vfs_user_xattr_rm(struct kernfs_node *kn,
+				    const char *full_name,
+				    struct simple_xattrs *xattrs,
+				    const void *value, size_t size, int flags)
+{
+	atomic_t *sz = &kn->iattr->user_xattr_size;
+	atomic_t *nr = &kn->iattr->nr_user_xattrs;
+	ssize_t removed_size;
+	int ret;
+
+	ret = simple_xattr_set(xattrs, full_name, value, size, flags,
+			       &removed_size);
+
+	if (removed_size >= 0) {
+		atomic_sub(removed_size, sz);
+		atomic_dec(nr);
+	}
+
+	return ret;
+}
+
+static int kernfs_vfs_user_xattr_set(const struct xattr_handler *handler,
+				     struct dentry *unused, struct inode *inode,
+				     const char *suffix, const void *value,
+				     size_t size, int flags)
+{
+	const char *full_name = xattr_full_name(handler, suffix);
+	struct kernfs_node *kn = inode->i_private;
+	struct kernfs_iattrs *attrs;
+
+	if (!(kernfs_root(kn)->flags & KERNFS_ROOT_SUPPORT_USER_XATTR))
+		return -EOPNOTSUPP;
+
+	attrs = kernfs_iattrs(kn);
+	if (!attrs)
+		return -ENOMEM;
+
+	if (value)
+		return kernfs_vfs_user_xattr_add(kn, full_name, &attrs->xattrs,
+						 value, size, flags);
+	else
+		return kernfs_vfs_user_xattr_rm(kn, full_name, &attrs->xattrs,
+						value, size, flags);
+
+}
+
 static const struct xattr_handler kernfs_trusted_xattr_handler = {
 	.prefix = XATTR_TRUSTED_PREFIX,
 	.get = kernfs_vfs_xattr_get,
@@ -339,8 +421,15 @@ static const struct xattr_handler kernfs_security_xattr_handler = {
 	.set = kernfs_vfs_xattr_set,
 };
 
+static const struct xattr_handler kernfs_user_xattr_handler = {
+	.prefix = XATTR_USER_PREFIX,
+	.get = kernfs_vfs_xattr_get,
+	.set = kernfs_vfs_user_xattr_set,
+};
+
 const struct xattr_handler *kernfs_xattr_handlers[] = {
 	&kernfs_trusted_xattr_handler,
 	&kernfs_security_xattr_handler,
+	&kernfs_user_xattr_handler,
 	NULL
 };
diff --git a/fs/kernfs/kernfs-internal.h b/fs/kernfs/kernfs-internal.h
index 2f3c51d..7ee97ef 100644
--- a/fs/kernfs/kernfs-internal.h
+++ b/fs/kernfs/kernfs-internal.h
@@ -26,6 +26,8 @@ struct kernfs_iattrs {
 	struct timespec64	ia_ctime;
 
 	struct simple_xattrs	xattrs;
+	atomic_t		nr_user_xattrs;
+	atomic_t		user_xattr_size;
 };
 
 /* +1 to avoid triggering overflow warning when negating it */
diff --git a/fs/namei.c b/fs/namei.c
index 61fdb77..a320371 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -610,7 +610,7 @@ static bool __legitimize_path(struct path *path, unsigned seq, unsigned mseq)
 static inline bool legitimize_path(struct nameidata *nd,
 			    struct path *path, unsigned seq)
 {
-	return __legitimize_path(path, nd->m_seq, seq);
+	return __legitimize_path(path, seq, nd->m_seq);
 }
 
 static bool legitimize_links(struct nameidata *nd)
diff --git a/fs/nfs/blocklayout/blocklayout.c b/fs/nfs/blocklayout/blocklayout.c
index 6902217..d1a0e2c 100644
--- a/fs/nfs/blocklayout/blocklayout.c
+++ b/fs/nfs/blocklayout/blocklayout.c
@@ -476,7 +476,7 @@ static void bl_free_layout_hdr(struct pnfs_layout_hdr *lo)
 	err = ext_tree_remove(bl, true, 0, LLONG_MAX);
 	WARN_ON(err);
 
-	kfree(bl);
+	kfree_rcu(bl, bl_layout.plh_rcu);
 }
 
 static struct pnfs_layout_hdr *__bl_alloc_layout_hdr(struct inode *inode,
diff --git a/fs/nfs/callback.h b/fs/nfs/callback.h
index 5493502..6a20331 100644
--- a/fs/nfs/callback.h
+++ b/fs/nfs/callback.h
@@ -127,7 +127,9 @@ extern __be32 nfs4_callback_sequence(void *argp, void *resp,
 #define RCA4_TYPE_MASK_OBJ_LAYOUT_MAX  9
 #define RCA4_TYPE_MASK_OTHER_LAYOUT_MIN 12
 #define RCA4_TYPE_MASK_OTHER_LAYOUT_MAX 15
-#define RCA4_TYPE_MASK_ALL 0xf31f
+#define PNFS_FF_RCA4_TYPE_MASK_READ 16
+#define PNFS_FF_RCA4_TYPE_MASK_RW 17
+#define RCA4_TYPE_MASK_ALL 0x3f31f
 
 struct cb_recallanyargs {
 	uint32_t	craa_objs_to_keep;
diff --git a/fs/nfs/callback_proc.c b/fs/nfs/callback_proc.c
index cd4c6bc..e61dbc9 100644
--- a/fs/nfs/callback_proc.c
+++ b/fs/nfs/callback_proc.c
@@ -121,31 +121,31 @@ __be32 nfs4_callback_recall(void *argp, void *resp,
  */
 static struct inode *nfs_layout_find_inode_by_stateid(struct nfs_client *clp,
 		const nfs4_stateid *stateid)
+	__must_hold(RCU)
 {
 	struct nfs_server *server;
 	struct inode *inode;
 	struct pnfs_layout_hdr *lo;
 
+	rcu_read_lock();
 	list_for_each_entry_rcu(server, &clp->cl_superblocks, client_link) {
-		list_for_each_entry(lo, &server->layouts, plh_layouts) {
+		list_for_each_entry_rcu(lo, &server->layouts, plh_layouts) {
+			if (!pnfs_layout_is_valid(lo))
+				continue;
 			if (stateid != NULL &&
 			    !nfs4_stateid_match_other(stateid, &lo->plh_stateid))
 				continue;
+			if (!nfs_sb_active(server->super))
+				continue;
 			inode = igrab(lo->plh_inode);
-			if (!inode)
-				return ERR_PTR(-EAGAIN);
-			if (!nfs_sb_active(inode->i_sb)) {
-				rcu_read_unlock();
-				spin_unlock(&clp->cl_lock);
-				iput(inode);
-				spin_lock(&clp->cl_lock);
-				rcu_read_lock();
-				return ERR_PTR(-EAGAIN);
-			}
-			return inode;
+			rcu_read_unlock();
+			if (inode)
+				return inode;
+			nfs_sb_deactive(server->super);
+			return ERR_PTR(-EAGAIN);
 		}
 	}
-
+	rcu_read_unlock();
 	return ERR_PTR(-ENOENT);
 }
 
@@ -163,28 +163,25 @@ static struct inode *nfs_layout_find_inode_by_fh(struct nfs_client *clp,
 	struct inode *inode;
 	struct pnfs_layout_hdr *lo;
 
+	rcu_read_lock();
 	list_for_each_entry_rcu(server, &clp->cl_superblocks, client_link) {
-		list_for_each_entry(lo, &server->layouts, plh_layouts) {
+		list_for_each_entry_rcu(lo, &server->layouts, plh_layouts) {
 			nfsi = NFS_I(lo->plh_inode);
 			if (nfs_compare_fh(fh, &nfsi->fh))
 				continue;
 			if (nfsi->layout != lo)
 				continue;
+			if (!nfs_sb_active(server->super))
+				continue;
 			inode = igrab(lo->plh_inode);
-			if (!inode)
-				return ERR_PTR(-EAGAIN);
-			if (!nfs_sb_active(inode->i_sb)) {
-				rcu_read_unlock();
-				spin_unlock(&clp->cl_lock);
-				iput(inode);
-				spin_lock(&clp->cl_lock);
-				rcu_read_lock();
-				return ERR_PTR(-EAGAIN);
-			}
-			return inode;
+			rcu_read_unlock();
+			if (inode)
+				return inode;
+			nfs_sb_deactive(server->super);
+			return ERR_PTR(-EAGAIN);
 		}
 	}
-
+	rcu_read_unlock();
 	return ERR_PTR(-ENOENT);
 }
 
@@ -194,14 +191,9 @@ static struct inode *nfs_layout_find_inode(struct nfs_client *clp,
 {
 	struct inode *inode;
 
-	spin_lock(&clp->cl_lock);
-	rcu_read_lock();
 	inode = nfs_layout_find_inode_by_stateid(clp, stateid);
 	if (inode == ERR_PTR(-ENOENT))
 		inode = nfs_layout_find_inode_by_fh(clp, fh);
-	rcu_read_unlock();
-	spin_unlock(&clp->cl_lock);
-
 	return inode;
 }
 
@@ -280,7 +272,7 @@ static u32 initiate_file_draining(struct nfs_client *clp,
 		goto unlock;
 	}
 
-	pnfs_set_layout_stateid(lo, &args->cbl_stateid, true);
+	pnfs_set_layout_stateid(lo, &args->cbl_stateid, NULL, true);
 	switch (pnfs_mark_matching_lsegs_return(lo, &free_me_list,
 				&args->cbl_range,
 				be32_to_cpu(args->cbl_stateid.seqid))) {
@@ -605,6 +597,7 @@ __be32 nfs4_callback_recallany(void *argp, void *resp,
 	struct cb_recallanyargs *args = argp;
 	__be32 status;
 	fmode_t flags = 0;
+	bool schedule_manager = false;
 
 	status = cpu_to_be32(NFS4ERR_OP_NOT_IN_SESSION);
 	if (!cps->clp) /* set in cb_sequence */
@@ -627,6 +620,18 @@ __be32 nfs4_callback_recallany(void *argp, void *resp,
 
 	if (args->craa_type_mask & BIT(RCA4_TYPE_MASK_FILE_LAYOUT))
 		pnfs_recall_all_layouts(cps->clp);
+
+	if (args->craa_type_mask & BIT(PNFS_FF_RCA4_TYPE_MASK_READ)) {
+		set_bit(NFS4CLNT_RECALL_ANY_LAYOUT_READ, &cps->clp->cl_state);
+		schedule_manager = true;
+	}
+	if (args->craa_type_mask & BIT(PNFS_FF_RCA4_TYPE_MASK_RW)) {
+		set_bit(NFS4CLNT_RECALL_ANY_LAYOUT_RW, &cps->clp->cl_state);
+		schedule_manager = true;
+	}
+	if (schedule_manager)
+		nfs4_schedule_state_manager(cps->clp);
+
 out:
 	dprintk("%s: exit with status = %d\n", __func__, ntohl(status));
 	return status;
diff --git a/fs/nfs/delegation.c b/fs/nfs/delegation.c
index 1865322..816e142 100644
--- a/fs/nfs/delegation.c
+++ b/fs/nfs/delegation.c
@@ -378,6 +378,18 @@ nfs_inode_detach_delegation(struct inode *inode)
 }
 
 static void
+nfs_update_delegation_cred(struct nfs_delegation *delegation,
+		const struct cred *cred)
+{
+	const struct cred *old;
+
+	if (cred_fscmp(delegation->cred, cred) != 0) {
+		old = xchg(&delegation->cred, get_cred(cred));
+		put_cred(old);
+	}
+}
+
+static void
 nfs_update_inplace_delegation(struct nfs_delegation *delegation,
 		const struct nfs_delegation *update)
 {
@@ -385,8 +397,14 @@ nfs_update_inplace_delegation(struct nfs_delegation *delegation,
 		delegation->stateid.seqid = update->stateid.seqid;
 		smp_wmb();
 		delegation->type = update->type;
-		if (test_and_clear_bit(NFS_DELEGATION_REVOKED, &delegation->flags))
+		delegation->pagemod_limit = update->pagemod_limit;
+		if (test_bit(NFS_DELEGATION_REVOKED, &delegation->flags)) {
+			delegation->change_attr = update->change_attr;
+			nfs_update_delegation_cred(delegation, update->cred);
+			/* smp_mb__before_atomic() is implicit due to xchg() */
+			clear_bit(NFS_DELEGATION_REVOKED, &delegation->flags);
 			atomic_long_inc(&nfs_active_delegations);
+		}
 	}
 }
 
@@ -545,6 +563,79 @@ static bool nfs_delegation_need_return(struct nfs_delegation *delegation)
 	return ret;
 }
 
+static int nfs_server_return_marked_delegations(struct nfs_server *server,
+		void __always_unused *data)
+{
+	struct nfs_delegation *delegation;
+	struct nfs_delegation *prev;
+	struct inode *inode;
+	struct inode *place_holder = NULL;
+	struct nfs_delegation *place_holder_deleg = NULL;
+	int err = 0;
+
+restart:
+	/*
+	 * To avoid quadratic looping we hold a reference
+	 * to an inode place_holder.  Each time we restart, we
+	 * list delegation in the server from the delegations
+	 * of that inode.
+	 * prev is an RCU-protected pointer to a delegation which
+	 * wasn't marked for return and might be a good choice for
+	 * the next place_holder.
+	 */
+	prev = NULL;
+	delegation = NULL;
+	rcu_read_lock();
+	if (place_holder)
+		delegation = rcu_dereference(NFS_I(place_holder)->delegation);
+	if (!delegation || delegation != place_holder_deleg)
+		delegation = list_entry_rcu(server->delegations.next,
+					    struct nfs_delegation, super_list);
+	list_for_each_entry_from_rcu(delegation, &server->delegations, super_list) {
+		struct inode *to_put = NULL;
+
+		if (test_bit(NFS_DELEGATION_INODE_FREEING, &delegation->flags))
+			continue;
+		if (!nfs_delegation_need_return(delegation)) {
+			if (nfs4_is_valid_delegation(delegation, 0))
+				prev = delegation;
+			continue;
+		}
+
+		if (prev) {
+			struct inode *tmp = nfs_delegation_grab_inode(prev);
+			if (tmp) {
+				to_put = place_holder;
+				place_holder = tmp;
+				place_holder_deleg = prev;
+			}
+		}
+
+		inode = nfs_delegation_grab_inode(delegation);
+		if (inode == NULL) {
+			rcu_read_unlock();
+			iput(to_put);
+			goto restart;
+		}
+		delegation = nfs_start_delegation_return_locked(NFS_I(inode));
+		rcu_read_unlock();
+
+		iput(to_put);
+
+		err = nfs_end_delegation_return(inode, delegation, 0);
+		iput(inode);
+		cond_resched();
+		if (!err)
+			goto restart;
+		set_bit(NFS4CLNT_DELEGRETURN, &server->nfs_client->cl_state);
+		goto out;
+	}
+	rcu_read_unlock();
+out:
+	iput(place_holder);
+	return err;
+}
+
 /**
  * nfs_client_return_marked_delegations - return previously marked delegations
  * @clp: nfs_client to process
@@ -557,90 +648,8 @@ static bool nfs_delegation_need_return(struct nfs_delegation *delegation)
  */
 int nfs_client_return_marked_delegations(struct nfs_client *clp)
 {
-	struct nfs_delegation *delegation;
-	struct nfs_delegation *prev;
-	struct nfs_server *server;
-	struct inode *inode;
-	struct inode *place_holder = NULL;
-	struct nfs_delegation *place_holder_deleg = NULL;
-	int err = 0;
-
-restart:
-	/*
-	 * To avoid quadratic looping we hold a reference
-	 * to an inode place_holder.  Each time we restart, we
-	 * list nfs_servers from the server of that inode, and
-	 * delegation in the server from the delegations of that
-	 * inode.
-	 * prev is an RCU-protected pointer to a delegation which
-	 * wasn't marked for return and might be a good choice for
-	 * the next place_holder.
-	 */
-	rcu_read_lock();
-	prev = NULL;
-	if (place_holder)
-		server = NFS_SERVER(place_holder);
-	else
-		server = list_entry_rcu(clp->cl_superblocks.next,
-					struct nfs_server, client_link);
-	list_for_each_entry_from_rcu(server, &clp->cl_superblocks, client_link) {
-		delegation = NULL;
-		if (place_holder && server == NFS_SERVER(place_holder))
-			delegation = rcu_dereference(NFS_I(place_holder)->delegation);
-		if (!delegation || delegation != place_holder_deleg)
-			delegation = list_entry_rcu(server->delegations.next,
-						    struct nfs_delegation, super_list);
-		list_for_each_entry_from_rcu(delegation, &server->delegations, super_list) {
-			struct inode *to_put = NULL;
-
-			if (!nfs_delegation_need_return(delegation)) {
-				prev = delegation;
-				continue;
-			}
-			if (!nfs_sb_active(server->super))
-				break; /* continue in outer loop */
-
-			if (prev) {
-				struct inode *tmp;
-
-				tmp = nfs_delegation_grab_inode(prev);
-				if (tmp) {
-					to_put = place_holder;
-					place_holder = tmp;
-					place_holder_deleg = prev;
-				}
-			}
-
-			inode = nfs_delegation_grab_inode(delegation);
-			if (inode == NULL) {
-				rcu_read_unlock();
-				if (to_put)
-					iput(to_put);
-				nfs_sb_deactive(server->super);
-				goto restart;
-			}
-			delegation = nfs_start_delegation_return_locked(NFS_I(inode));
-			rcu_read_unlock();
-
-			if (to_put)
-				iput(to_put);
-
-			err = nfs_end_delegation_return(inode, delegation, 0);
-			iput(inode);
-			nfs_sb_deactive(server->super);
-			cond_resched();
-			if (!err)
-				goto restart;
-			set_bit(NFS4CLNT_DELEGRETURN, &clp->cl_state);
-			if (place_holder)
-				iput(place_holder);
-			return err;
-		}
-	}
-	rcu_read_unlock();
-	if (place_holder)
-		iput(place_holder);
-	return 0;
+	return nfs_client_for_each_server(clp,
+			nfs_server_return_marked_delegations, NULL);
 }
 
 /**
@@ -1083,6 +1092,42 @@ void nfs_delegation_mark_reclaim(struct nfs_client *clp)
 	rcu_read_unlock();
 }
 
+static int nfs_server_reap_unclaimed_delegations(struct nfs_server *server,
+		void __always_unused *data)
+{
+	struct nfs_delegation *delegation;
+	struct inode *inode;
+restart:
+	rcu_read_lock();
+restart_locked:
+	list_for_each_entry_rcu(delegation, &server->delegations, super_list) {
+		if (test_bit(NFS_DELEGATION_INODE_FREEING,
+					&delegation->flags) ||
+		    test_bit(NFS_DELEGATION_RETURNING,
+					&delegation->flags) ||
+		    test_bit(NFS_DELEGATION_NEED_RECLAIM,
+					&delegation->flags) == 0)
+			continue;
+		inode = nfs_delegation_grab_inode(delegation);
+		if (inode == NULL)
+			goto restart_locked;
+		delegation = nfs_start_delegation_return_locked(NFS_I(inode));
+		rcu_read_unlock();
+		if (delegation != NULL) {
+			if (nfs_detach_delegation(NFS_I(inode), delegation,
+						server) != NULL)
+				nfs_free_delegation(delegation);
+			/* Match nfs_start_delegation_return_locked */
+			nfs_put_delegation(delegation);
+		}
+		iput(inode);
+		cond_resched();
+		goto restart;
+	}
+	rcu_read_unlock();
+	return 0;
+}
+
 /**
  * nfs_delegation_reap_unclaimed - reap unclaimed delegations after reboot recovery is done
  * @clp: nfs_client to process
@@ -1090,46 +1135,8 @@ void nfs_delegation_mark_reclaim(struct nfs_client *clp)
  */
 void nfs_delegation_reap_unclaimed(struct nfs_client *clp)
 {
-	struct nfs_delegation *delegation;
-	struct nfs_server *server;
-	struct inode *inode;
-
-restart:
-	rcu_read_lock();
-	list_for_each_entry_rcu(server, &clp->cl_superblocks, client_link) {
-		list_for_each_entry_rcu(delegation, &server->delegations,
-								super_list) {
-			if (test_bit(NFS_DELEGATION_INODE_FREEING,
-						&delegation->flags) ||
-			    test_bit(NFS_DELEGATION_RETURNING,
-						&delegation->flags) ||
-			    test_bit(NFS_DELEGATION_NEED_RECLAIM,
-						&delegation->flags) == 0)
-				continue;
-			if (!nfs_sb_active(server->super))
-				break; /* continue in outer loop */
-			inode = nfs_delegation_grab_inode(delegation);
-			if (inode == NULL) {
-				rcu_read_unlock();
-				nfs_sb_deactive(server->super);
-				goto restart;
-			}
-			delegation = nfs_start_delegation_return_locked(NFS_I(inode));
-			rcu_read_unlock();
-			if (delegation != NULL) {
-				if (nfs_detach_delegation(NFS_I(inode), delegation,
-							server) != NULL)
-					nfs_free_delegation(delegation);
-				/* Match nfs_start_delegation_return_locked */
-				nfs_put_delegation(delegation);
-			}
-			iput(inode);
-			nfs_sb_deactive(server->super);
-			cond_resched();
-			goto restart;
-		}
-	}
-	rcu_read_unlock();
+	nfs_client_for_each_server(clp, nfs_server_reap_unclaimed_delegations,
+			NULL);
 }
 
 static inline bool nfs4_server_rebooted(const struct nfs_client *clp)
@@ -1215,6 +1222,48 @@ nfs_delegation_test_free_expired(struct inode *inode,
 		nfs_remove_bad_delegation(inode, stateid);
 }
 
+static int nfs_server_reap_expired_delegations(struct nfs_server *server,
+		void __always_unused *data)
+{
+	struct nfs_delegation *delegation;
+	struct inode *inode;
+	const struct cred *cred;
+	nfs4_stateid stateid;
+restart:
+	rcu_read_lock();
+restart_locked:
+	list_for_each_entry_rcu(delegation, &server->delegations, super_list) {
+		if (test_bit(NFS_DELEGATION_INODE_FREEING,
+					&delegation->flags) ||
+		    test_bit(NFS_DELEGATION_RETURNING,
+					&delegation->flags) ||
+		    test_bit(NFS_DELEGATION_TEST_EXPIRED,
+					&delegation->flags) == 0)
+			continue;
+		inode = nfs_delegation_grab_inode(delegation);
+		if (inode == NULL)
+			goto restart_locked;
+		spin_lock(&delegation->lock);
+		cred = get_cred_rcu(delegation->cred);
+		nfs4_stateid_copy(&stateid, &delegation->stateid);
+		spin_unlock(&delegation->lock);
+		clear_bit(NFS_DELEGATION_TEST_EXPIRED, &delegation->flags);
+		rcu_read_unlock();
+		nfs_delegation_test_free_expired(inode, &stateid, cred);
+		put_cred(cred);
+		if (!nfs4_server_rebooted(server->nfs_client)) {
+			iput(inode);
+			cond_resched();
+			goto restart;
+		}
+		nfs_inode_mark_test_expired_delegation(server,inode);
+		iput(inode);
+		return -EAGAIN;
+	}
+	rcu_read_unlock();
+	return 0;
+}
+
 /**
  * nfs_reap_expired_delegations - reap expired delegations
  * @clp: nfs_client to process
@@ -1226,51 +1275,8 @@ nfs_delegation_test_free_expired(struct inode *inode,
  */
 void nfs_reap_expired_delegations(struct nfs_client *clp)
 {
-	struct nfs_delegation *delegation;
-	struct nfs_server *server;
-	struct inode *inode;
-	const struct cred *cred;
-	nfs4_stateid stateid;
-
-restart:
-	rcu_read_lock();
-	list_for_each_entry_rcu(server, &clp->cl_superblocks, client_link) {
-		list_for_each_entry_rcu(delegation, &server->delegations,
-								super_list) {
-			if (test_bit(NFS_DELEGATION_INODE_FREEING,
-						&delegation->flags) ||
-			    test_bit(NFS_DELEGATION_RETURNING,
-						&delegation->flags) ||
-			    test_bit(NFS_DELEGATION_TEST_EXPIRED,
-						&delegation->flags) == 0)
-				continue;
-			if (!nfs_sb_active(server->super))
-				break; /* continue in outer loop */
-			inode = nfs_delegation_grab_inode(delegation);
-			if (inode == NULL) {
-				rcu_read_unlock();
-				nfs_sb_deactive(server->super);
-				goto restart;
-			}
-			cred = get_cred_rcu(delegation->cred);
-			nfs4_stateid_copy(&stateid, &delegation->stateid);
-			clear_bit(NFS_DELEGATION_TEST_EXPIRED, &delegation->flags);
-			rcu_read_unlock();
-			nfs_delegation_test_free_expired(inode, &stateid, cred);
-			put_cred(cred);
-			if (nfs4_server_rebooted(clp)) {
-				nfs_inode_mark_test_expired_delegation(server,inode);
-				iput(inode);
-				nfs_sb_deactive(server->super);
-				return;
-			}
-			iput(inode);
-			nfs_sb_deactive(server->super);
-			cond_resched();
-			goto restart;
-		}
-	}
-	rcu_read_unlock();
+	nfs_client_for_each_server(clp, nfs_server_reap_expired_delegations,
+			NULL);
 }
 
 void nfs_inode_find_delegation_state_and_recover(struct inode *inode,
@@ -1359,11 +1365,14 @@ bool nfs4_copy_delegation_stateid(struct inode *inode, fmode_t flags,
 {
 	struct nfs_inode *nfsi = NFS_I(inode);
 	struct nfs_delegation *delegation;
-	bool ret;
+	bool ret = false;
 
 	flags &= FMODE_READ|FMODE_WRITE;
 	rcu_read_lock();
 	delegation = rcu_dereference(nfsi->delegation);
+	if (!delegation)
+		goto out;
+	spin_lock(&delegation->lock);
 	ret = nfs4_is_valid_delegation(delegation, flags);
 	if (ret) {
 		nfs4_stateid_copy(dst, &delegation->stateid);
@@ -1371,6 +1380,8 @@ bool nfs4_copy_delegation_stateid(struct inode *inode, fmode_t flags,
 		if (cred)
 			*cred = get_cred(delegation->cred);
 	}
+	spin_unlock(&delegation->lock);
+out:
 	rcu_read_unlock();
 	return ret;
 }
diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index d4b839b..5a331da 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -141,10 +141,9 @@ struct nfs_cache_array {
 	int size;
 	int eof_index;
 	u64 last_cookie;
-	struct nfs_cache_array_entry array[0];
+	struct nfs_cache_array_entry array[];
 };
 
-typedef int (*decode_dirent_t)(struct xdr_stream *, struct nfs_entry *, bool);
 typedef struct {
 	struct file	*file;
 	struct page	*page;
@@ -153,7 +152,7 @@ typedef struct {
 	u64		*dir_cookie;
 	u64		last_cookie;
 	loff_t		current_index;
-	decode_dirent_t	decode;
+	loff_t		prev_index;
 
 	unsigned long	dir_verifier;
 	unsigned long	timestamp;
@@ -240,6 +239,25 @@ int nfs_readdir_add_to_array(struct nfs_entry *entry, struct page *page)
 	return ret;
 }
 
+static inline
+int is_32bit_api(void)
+{
+#ifdef CONFIG_COMPAT
+	return in_compat_syscall();
+#else
+	return (BITS_PER_LONG == 32);
+#endif
+}
+
+static
+bool nfs_readdir_use_cookie(const struct file *filp)
+{
+	if ((filp->f_mode & FMODE_32BITHASH) ||
+	    (!(filp->f_mode & FMODE_64BITHASH) && is_32bit_api()))
+		return false;
+	return true;
+}
+
 static
 int nfs_readdir_search_for_pos(struct nfs_cache_array *array, nfs_readdir_descriptor_t *desc)
 {
@@ -289,7 +307,7 @@ int nfs_readdir_search_for_cookie(struct nfs_cache_array *array, nfs_readdir_des
 			    !nfs_readdir_inode_mapping_valid(nfsi)) {
 				ctx->duped = 0;
 				ctx->attr_gencount = nfsi->attr_gencount;
-			} else if (new_pos < desc->ctx->pos) {
+			} else if (new_pos < desc->prev_index) {
 				if (ctx->duped > 0
 				    && ctx->dup_cookie == *desc->dir_cookie) {
 					if (printk_ratelimit()) {
@@ -305,7 +323,11 @@ int nfs_readdir_search_for_cookie(struct nfs_cache_array *array, nfs_readdir_des
 				ctx->dup_cookie = *desc->dir_cookie;
 				ctx->duped = -1;
 			}
-			desc->ctx->pos = new_pos;
+			if (nfs_readdir_use_cookie(desc->file))
+				desc->ctx->pos = *desc->dir_cookie;
+			else
+				desc->ctx->pos = new_pos;
+			desc->prev_index = new_pos;
 			desc->cache_entry_index = i;
 			return 0;
 		}
@@ -376,9 +398,10 @@ int nfs_readdir_xdr_filler(struct page **pages, nfs_readdir_descriptor_t *desc,
 static int xdr_decode(nfs_readdir_descriptor_t *desc,
 		      struct nfs_entry *entry, struct xdr_stream *xdr)
 {
+	struct inode *inode = file_inode(desc->file);
 	int error;
 
-	error = desc->decode(xdr, entry, desc->plus);
+	error = NFS_PROTO(inode)->decode_dirent(xdr, entry, desc->plus);
 	if (error)
 		return error;
 	entry->fattr->time_start = desc->timestamp;
@@ -756,6 +779,7 @@ int readdir_search_pagecache(nfs_readdir_descriptor_t *desc)
 
 	if (desc->page_index == 0) {
 		desc->current_index = 0;
+		desc->prev_index = 0;
 		desc->last_cookie = 0;
 	}
 	do {
@@ -786,11 +810,14 @@ int nfs_do_filldir(nfs_readdir_descriptor_t *desc)
 			desc->eof = true;
 			break;
 		}
-		desc->ctx->pos++;
 		if (i < (array->size-1))
 			*desc->dir_cookie = array->array[i+1].cookie;
 		else
 			*desc->dir_cookie = array->last_cookie;
+		if (nfs_readdir_use_cookie(file))
+			desc->ctx->pos = *desc->dir_cookie;
+		else
+			desc->ctx->pos++;
 		if (ctx->duped != 0)
 			ctx->duped = 1;
 	}
@@ -860,9 +887,14 @@ static int nfs_readdir(struct file *file, struct dir_context *ctx)
 {
 	struct dentry	*dentry = file_dentry(file);
 	struct inode	*inode = d_inode(dentry);
-	nfs_readdir_descriptor_t my_desc,
-			*desc = &my_desc;
 	struct nfs_open_dir_context *dir_ctx = file->private_data;
+	nfs_readdir_descriptor_t my_desc = {
+		.file = file,
+		.ctx = ctx,
+		.dir_cookie = &dir_ctx->dir_cookie,
+		.plus = nfs_use_readdirplus(inode, ctx),
+	},
+			*desc = &my_desc;
 	int res = 0;
 
 	dfprintk(FILE, "NFS: readdir(%pD2) starting at cookie %llu\n",
@@ -875,14 +907,6 @@ static int nfs_readdir(struct file *file, struct dir_context *ctx)
 	 * to either find the entry with the appropriate number or
 	 * revalidate the cookie.
 	 */
-	memset(desc, 0, sizeof(*desc));
-
-	desc->file = file;
-	desc->ctx = ctx;
-	desc->dir_cookie = &dir_ctx->dir_cookie;
-	desc->decode = NFS_PROTO(inode)->decode_dirent;
-	desc->plus = nfs_use_readdirplus(inode, ctx);
-
 	if (ctx->pos == 0 || nfs_attribute_cache_expired(inode))
 		res = nfs_revalidate_mapping(inode, file->f_mapping);
 	if (res < 0)
@@ -954,7 +978,10 @@ static loff_t nfs_llseek_dir(struct file *filp, loff_t offset, int whence)
 	}
 	if (offset != filp->f_pos) {
 		filp->f_pos = offset;
-		dir_ctx->dir_cookie = 0;
+		if (nfs_readdir_use_cookie(filp))
+			dir_ctx->dir_cookie = offset;
+		else
+			dir_ctx->dir_cookie = 0;
 		dir_ctx->duped = 0;
 	}
 	inode_unlock(inode);
@@ -2282,7 +2309,7 @@ static DEFINE_SPINLOCK(nfs_access_lru_lock);
 static LIST_HEAD(nfs_access_lru_list);
 static atomic_long_t nfs_access_nr_entries;
 
-static unsigned long nfs_access_max_cachesize = ULONG_MAX;
+static unsigned long nfs_access_max_cachesize = 4*1024*1024;
 module_param(nfs_access_max_cachesize, ulong, 0644);
 MODULE_PARM_DESC(nfs_access_max_cachesize, "NFS access maximum total cache length");
 
@@ -2642,9 +2669,10 @@ static int nfs_do_access(struct inode *inode, const struct cred *cred, int mask)
 	status = NFS_PROTO(inode)->access(inode, &cache);
 	if (status != 0) {
 		if (status == -ESTALE) {
-			nfs_zap_caches(inode);
 			if (!S_ISDIR(inode->i_mode))
-				set_bit(NFS_INO_STALE, &NFS_I(inode)->flags);
+				nfs_set_inode_stale(inode);
+			else
+				nfs_zap_caches(inode);
 		}
 		goto out;
 	}
@@ -2732,14 +2760,7 @@ int nfs_permission(struct inode *inode, int mask)
 	if (!NFS_PROTO(inode)->access)
 		goto out_notsup;
 
-	/* Always try fast lookups first */
-	rcu_read_lock();
-	res = nfs_do_access(inode, cred, mask|MAY_NOT_BLOCK);
-	rcu_read_unlock();
-	if (res == -ECHILD && !(mask & MAY_NOT_BLOCK)) {
-		/* Fast lookup failed, try the slow way */
-		res = nfs_do_access(inode, cred, mask);
-	}
+	res = nfs_do_access(inode, cred, mask);
 out:
 	if (!res && (mask & MAY_EXEC))
 		res = nfs_execute_ok(inode, mask);
diff --git a/fs/nfs/direct.c b/fs/nfs/direct.c
index b768a0b..a57e7c7 100644
--- a/fs/nfs/direct.c
+++ b/fs/nfs/direct.c
@@ -94,7 +94,7 @@ struct nfs_direct_req {
 #define NFS_ODIRECT_RESCHED_WRITES	(2)	/* write verification failed */
 	/* for read */
 #define NFS_ODIRECT_SHOULD_DIRTY	(3)	/* dirty user-space page after read */
-	struct nfs_writeverf	verf;		/* unstable write verifier */
+#define NFS_ODIRECT_DONE		INT_MAX	/* write verification failed */
 };
 
 static const struct nfs_pgio_completion_ops nfs_direct_write_completion_ops;
@@ -151,106 +151,6 @@ nfs_direct_count_bytes(struct nfs_direct_req *dreq,
 		dreq->count = dreq_len;
 }
 
-/*
- * nfs_direct_select_verf - select the right verifier
- * @dreq - direct request possibly spanning multiple servers
- * @ds_clp - nfs_client of data server or NULL if MDS / non-pnfs
- * @commit_idx - commit bucket index for the DS
- *
- * returns the correct verifier to use given the role of the server
- */
-static struct nfs_writeverf *
-nfs_direct_select_verf(struct nfs_direct_req *dreq,
-		       struct nfs_client *ds_clp,
-		       int commit_idx)
-{
-	struct nfs_writeverf *verfp = &dreq->verf;
-
-#ifdef CONFIG_NFS_V4_1
-	/*
-	 * pNFS is in use, use the DS verf except commit_through_mds is set
-	 * for layout segment where nbuckets is zero.
-	 */
-	if (ds_clp && dreq->ds_cinfo.nbuckets > 0) {
-		if (commit_idx >= 0 && commit_idx < dreq->ds_cinfo.nbuckets)
-			verfp = &dreq->ds_cinfo.buckets[commit_idx].direct_verf;
-		else
-			WARN_ON_ONCE(1);
-	}
-#endif
-	return verfp;
-}
-
-
-/*
- * nfs_direct_set_hdr_verf - set the write/commit verifier
- * @dreq - direct request possibly spanning multiple servers
- * @hdr - pageio header to validate against previously seen verfs
- *
- * Set the server's (MDS or DS) "seen" verifier
- */
-static void nfs_direct_set_hdr_verf(struct nfs_direct_req *dreq,
-				    struct nfs_pgio_header *hdr)
-{
-	struct nfs_writeverf *verfp;
-
-	verfp = nfs_direct_select_verf(dreq, hdr->ds_clp, hdr->ds_commit_idx);
-	WARN_ON_ONCE(verfp->committed >= 0);
-	memcpy(verfp, &hdr->verf, sizeof(struct nfs_writeverf));
-	WARN_ON_ONCE(verfp->committed < 0);
-}
-
-static int nfs_direct_cmp_verf(const struct nfs_writeverf *v1,
-		const struct nfs_writeverf *v2)
-{
-	return nfs_write_verifier_cmp(&v1->verifier, &v2->verifier);
-}
-
-/*
- * nfs_direct_cmp_hdr_verf - compare verifier for pgio header
- * @dreq - direct request possibly spanning multiple servers
- * @hdr - pageio header to validate against previously seen verf
- *
- * set the server's "seen" verf if not initialized.
- * returns result of comparison between @hdr->verf and the "seen"
- * verf of the server used by @hdr (DS or MDS)
- */
-static int nfs_direct_set_or_cmp_hdr_verf(struct nfs_direct_req *dreq,
-					  struct nfs_pgio_header *hdr)
-{
-	struct nfs_writeverf *verfp;
-
-	verfp = nfs_direct_select_verf(dreq, hdr->ds_clp, hdr->ds_commit_idx);
-	if (verfp->committed < 0) {
-		nfs_direct_set_hdr_verf(dreq, hdr);
-		return 0;
-	}
-	return nfs_direct_cmp_verf(verfp, &hdr->verf);
-}
-
-/*
- * nfs_direct_cmp_commit_data_verf - compare verifier for commit data
- * @dreq - direct request possibly spanning multiple servers
- * @data - commit data to validate against previously seen verf
- *
- * returns result of comparison between @data->verf and the verf of
- * the server used by @data (DS or MDS)
- */
-static int nfs_direct_cmp_commit_data_verf(struct nfs_direct_req *dreq,
-					   struct nfs_commit_data *data)
-{
-	struct nfs_writeverf *verfp;
-
-	verfp = nfs_direct_select_verf(dreq, data->ds_clp,
-					 data->ds_commit_index);
-
-	/* verifier not set so always fail */
-	if (verfp->committed < 0 || data->res.verf->committed <= NFS_UNSTABLE)
-		return 1;
-
-	return nfs_direct_cmp_verf(verfp, data->res.verf);
-}
-
 /**
  * nfs_direct_IO - NFS address space operation for direct I/O
  * @iocb: target I/O control block
@@ -305,7 +205,7 @@ static inline struct nfs_direct_req *nfs_direct_req_alloc(void)
 	kref_get(&dreq->kref);
 	init_completion(&dreq->completion);
 	INIT_LIST_HEAD(&dreq->mds_cinfo.list);
-	dreq->verf.committed = NFS_INVALID_STABLE_HOW;	/* not set yet */
+	pnfs_init_ds_commit_info(&dreq->ds_cinfo);
 	INIT_WORK(&dreq->work, nfs_direct_write_schedule_work);
 	spin_lock_init(&dreq->lock);
 
@@ -316,7 +216,7 @@ static void nfs_direct_req_free(struct kref *kref)
 {
 	struct nfs_direct_req *dreq = container_of(kref, struct nfs_direct_req, kref);
 
-	nfs_free_pnfs_ds_cinfo(&dreq->ds_cinfo);
+	pnfs_release_ds_info(&dreq->ds_cinfo, dreq->inode);
 	if (dreq->l_ctx != NULL)
 		nfs_put_lock_context(dreq->l_ctx);
 	if (dreq->ctx != NULL)
@@ -571,6 +471,7 @@ ssize_t nfs_file_direct_read(struct kiocb *iocb, struct iov_iter *iter)
 	l_ctx = nfs_get_lock_context(dreq->ctx);
 	if (IS_ERR(l_ctx)) {
 		result = PTR_ERR(l_ctx);
+		nfs_direct_req_release(dreq);
 		goto out_release;
 	}
 	dreq->l_ctx = l_ctx;
@@ -605,15 +506,30 @@ ssize_t nfs_file_direct_read(struct kiocb *iocb, struct iov_iter *iter)
 }
 
 static void
+nfs_direct_join_group(struct list_head *list, struct inode *inode)
+{
+	struct nfs_page *req, *next;
+
+	list_for_each_entry(req, list, wb_list) {
+		if (req->wb_head != req || req->wb_this_page == req)
+			continue;
+		for (next = req->wb_this_page;
+				next != req->wb_head;
+				next = next->wb_this_page) {
+			nfs_list_remove_request(next);
+			nfs_release_request(next);
+		}
+		nfs_join_page_group(req, inode);
+	}
+}
+
+static void
 nfs_direct_write_scan_commit_list(struct inode *inode,
 				  struct list_head *list,
 				  struct nfs_commit_info *cinfo)
 {
 	mutex_lock(&NFS_I(cinfo->inode)->commit_mutex);
-#ifdef CONFIG_NFS_V4_1
-	if (cinfo->ds != NULL && cinfo->ds->nwritten != 0)
-		NFS_SERVER(inode)->pnfs_curr_ld->recover_commit_reqs(list, cinfo);
-#endif
+	pnfs_recover_commit_reqs(list, cinfo);
 	nfs_scan_commit_list(&cinfo->mds->list, list, cinfo, 0);
 	mutex_unlock(&NFS_I(cinfo->inode)->commit_mutex);
 }
@@ -629,11 +545,12 @@ static void nfs_direct_write_reschedule(struct nfs_direct_req *dreq)
 	nfs_init_cinfo_from_dreq(&cinfo, dreq);
 	nfs_direct_write_scan_commit_list(dreq->inode, &reqs, &cinfo);
 
+	nfs_direct_join_group(&reqs, dreq->inode);
+
 	dreq->count = 0;
 	dreq->max_count = 0;
 	list_for_each_entry(req, &reqs, wb_list)
 		dreq->max_count += req->wb_bytes;
-	dreq->verf.committed = NFS_INVALID_STABLE_HOW;
 	nfs_clear_pnfs_ds_commit_verifiers(&dreq->ds_cinfo);
 	get_dreq(dreq);
 
@@ -670,27 +587,35 @@ static void nfs_direct_write_reschedule(struct nfs_direct_req *dreq)
 
 static void nfs_direct_commit_complete(struct nfs_commit_data *data)
 {
+	const struct nfs_writeverf *verf = data->res.verf;
 	struct nfs_direct_req *dreq = data->dreq;
 	struct nfs_commit_info cinfo;
 	struct nfs_page *req;
 	int status = data->task.tk_status;
 
+	if (status < 0) {
+		/* Errors in commit are fatal */
+		dreq->error = status;
+		dreq->max_count = 0;
+		dreq->count = 0;
+		dreq->flags = NFS_ODIRECT_DONE;
+	} else if (dreq->flags == NFS_ODIRECT_DONE)
+		status = dreq->error;
+
 	nfs_init_cinfo_from_dreq(&cinfo, dreq);
-	if (status < 0 || nfs_direct_cmp_commit_data_verf(dreq, data))
-		dreq->flags = NFS_ODIRECT_RESCHED_WRITES;
 
 	while (!list_empty(&data->pages)) {
 		req = nfs_list_entry(data->pages.next);
 		nfs_list_remove_request(req);
-		if (dreq->flags == NFS_ODIRECT_RESCHED_WRITES) {
+		if (status >= 0 && !nfs_write_match_verf(verf, req)) {
+			dreq->flags = NFS_ODIRECT_RESCHED_WRITES;
 			/*
 			 * Despite the reboot, the write was successful,
 			 * so reset wb_nio.
 			 */
 			req->wb_nio = 0;
-			/* Note the rewrite will go through mds */
 			nfs_mark_request_commit(req, NULL, &cinfo, 0);
-		} else
+		} else /* Error or match */
 			nfs_release_request(req);
 		nfs_unlock_and_release_request(req);
 	}
@@ -705,7 +630,8 @@ static void nfs_direct_resched_write(struct nfs_commit_info *cinfo,
 	struct nfs_direct_req *dreq = cinfo->dreq;
 
 	spin_lock(&dreq->lock);
-	dreq->flags = NFS_ODIRECT_RESCHED_WRITES;
+	if (dreq->flags != NFS_ODIRECT_DONE)
+		dreq->flags = NFS_ODIRECT_RESCHED_WRITES;
 	spin_unlock(&dreq->lock);
 	nfs_mark_request_commit(req, NULL, cinfo, 0);
 }
@@ -728,6 +654,23 @@ static void nfs_direct_commit_schedule(struct nfs_direct_req *dreq)
 		nfs_direct_write_reschedule(dreq);
 }
 
+static void nfs_direct_write_clear_reqs(struct nfs_direct_req *dreq)
+{
+	struct nfs_commit_info cinfo;
+	struct nfs_page *req;
+	LIST_HEAD(reqs);
+
+	nfs_init_cinfo_from_dreq(&cinfo, dreq);
+	nfs_direct_write_scan_commit_list(dreq->inode, &reqs, &cinfo);
+
+	while (!list_empty(&reqs)) {
+		req = nfs_list_entry(reqs.next);
+		nfs_list_remove_request(req);
+		nfs_release_request(req);
+		nfs_unlock_and_release_request(req);
+	}
+}
+
 static void nfs_direct_write_schedule_work(struct work_struct *work)
 {
 	struct nfs_direct_req *dreq = container_of(work, struct nfs_direct_req, work);
@@ -742,6 +685,7 @@ static void nfs_direct_write_schedule_work(struct work_struct *work)
 			nfs_direct_write_reschedule(dreq);
 			break;
 		default:
+			nfs_direct_write_clear_reqs(dreq);
 			nfs_zap_mapping(dreq->inode, dreq->inode->i_mapping);
 			nfs_direct_complete(dreq);
 	}
@@ -768,20 +712,15 @@ static void nfs_direct_write_completion(struct nfs_pgio_header *hdr)
 	}
 
 	nfs_direct_count_bytes(dreq, hdr);
-	if (hdr->good_bytes != 0) {
-		if (nfs_write_need_commit(hdr)) {
-			if (dreq->flags == NFS_ODIRECT_RESCHED_WRITES)
-				request_commit = true;
-			else if (dreq->flags == 0) {
-				nfs_direct_set_hdr_verf(dreq, hdr);
-				request_commit = true;
-				dreq->flags = NFS_ODIRECT_DO_COMMIT;
-			} else if (dreq->flags == NFS_ODIRECT_DO_COMMIT) {
-				request_commit = true;
-				if (nfs_direct_set_or_cmp_hdr_verf(dreq, hdr))
-					dreq->flags =
-						NFS_ODIRECT_RESCHED_WRITES;
-			}
+	if (hdr->good_bytes != 0 && nfs_write_need_commit(hdr)) {
+		switch (dreq->flags) {
+		case 0:
+			dreq->flags = NFS_ODIRECT_DO_COMMIT;
+			request_commit = true;
+			break;
+		case NFS_ODIRECT_RESCHED_WRITES:
+		case NFS_ODIRECT_DO_COMMIT:
+			request_commit = true;
 		}
 	}
 	spin_unlock(&dreq->lock);
@@ -990,11 +929,13 @@ ssize_t nfs_file_direct_write(struct kiocb *iocb, struct iov_iter *iter)
 	l_ctx = nfs_get_lock_context(dreq->ctx);
 	if (IS_ERR(l_ctx)) {
 		result = PTR_ERR(l_ctx);
+		nfs_direct_req_release(dreq);
 		goto out_release;
 	}
 	dreq->l_ctx = l_ctx;
 	if (!is_sync_kiocb(iocb))
 		dreq->iocb = iocb;
+	pnfs_init_ds_commit_info_ops(&dreq->ds_cinfo, inode);
 
 	nfs_start_io_direct(inode);
 
diff --git a/fs/nfs/dns_resolve.c b/fs/nfs/dns_resolve.c
index 89bd558..9638000 100644
--- a/fs/nfs/dns_resolve.c
+++ b/fs/nfs/dns_resolve.c
@@ -152,12 +152,13 @@ static int nfs_dns_upcall(struct cache_detail *cd,
 		struct cache_head *ch)
 {
 	struct nfs_dns_ent *key = container_of(ch, struct nfs_dns_ent, h);
-	int ret;
 
-	ret = nfs_cache_upcall(cd, key->hostname);
-	if (ret)
-		ret = sunrpc_cache_pipe_upcall(cd, ch);
-	return ret;
+	if (test_and_set_bit(CACHE_PENDING, &ch->flags))
+		return 0;
+	if (!nfs_cache_upcall(cd, key->hostname))
+		return 0;
+	clear_bit(CACHE_PENDING, &ch->flags);
+	return sunrpc_cache_pipe_upcall_timeout(cd, ch);
 }
 
 static int nfs_dns_match(struct cache_head *ca,
diff --git a/fs/nfs/filelayout/filelayout.c b/fs/nfs/filelayout/filelayout.c
index c9b605f..a13e690 100644
--- a/fs/nfs/filelayout/filelayout.c
+++ b/fs/nfs/filelayout/filelayout.c
@@ -49,6 +49,7 @@ MODULE_AUTHOR("Dean Hildebrand <dhildebz@umich.edu>");
 MODULE_DESCRIPTION("The NFSv4 file layout driver");
 
 #define FILELAYOUT_POLL_RETRY_MAX     (15*HZ)
+static const struct pnfs_commit_ops filelayout_commit_ops;
 
 static loff_t
 filelayout_get_dense_offset(struct nfs4_filelayout_segment *flseg,
@@ -750,72 +751,17 @@ filelayout_free_lseg(struct pnfs_layout_segment *lseg)
 	/* This assumes a single RW lseg */
 	if (lseg->pls_range.iomode == IOMODE_RW) {
 		struct nfs4_filelayout *flo;
+		struct inode *inode;
 
 		flo = FILELAYOUT_FROM_HDR(lseg->pls_layout);
-		flo->commit_info.nbuckets = 0;
-		kfree(flo->commit_info.buckets);
-		flo->commit_info.buckets = NULL;
+		inode = flo->generic_hdr.plh_inode;
+		spin_lock(&inode->i_lock);
+		pnfs_generic_ds_cinfo_release_lseg(&flo->commit_info, lseg);
+		spin_unlock(&inode->i_lock);
 	}
 	_filelayout_free_lseg(fl);
 }
 
-static int
-filelayout_alloc_commit_info(struct pnfs_layout_segment *lseg,
-			     struct nfs_commit_info *cinfo,
-			     gfp_t gfp_flags)
-{
-	struct nfs4_filelayout_segment *fl = FILELAYOUT_LSEG(lseg);
-	struct pnfs_commit_bucket *buckets;
-	int size, i;
-
-	if (fl->commit_through_mds)
-		return 0;
-
-	size = (fl->stripe_type == STRIPE_SPARSE) ?
-		fl->dsaddr->ds_num : fl->dsaddr->stripe_count;
-
-	if (cinfo->ds->nbuckets >= size) {
-		/* This assumes there is only one IOMODE_RW lseg.  What
-		 * we really want to do is have a layout_hdr level
-		 * dictionary of <multipath_list4, fh> keys, each
-		 * associated with a struct list_head, populated by calls
-		 * to filelayout_write_pagelist().
-		 * */
-		return 0;
-	}
-
-	buckets = kcalloc(size, sizeof(struct pnfs_commit_bucket),
-			  gfp_flags);
-	if (!buckets)
-		return -ENOMEM;
-	for (i = 0; i < size; i++) {
-		INIT_LIST_HEAD(&buckets[i].written);
-		INIT_LIST_HEAD(&buckets[i].committing);
-		/* mark direct verifier as unset */
-		buckets[i].direct_verf.committed = NFS_INVALID_STABLE_HOW;
-	}
-
-	spin_lock(&cinfo->inode->i_lock);
-	if (cinfo->ds->nbuckets >= size)
-		goto out;
-	for (i = 0; i < cinfo->ds->nbuckets; i++) {
-		list_splice(&cinfo->ds->buckets[i].written,
-			    &buckets[i].written);
-		list_splice(&cinfo->ds->buckets[i].committing,
-			    &buckets[i].committing);
-		buckets[i].direct_verf.committed =
-			cinfo->ds->buckets[i].direct_verf.committed;
-		buckets[i].wlseg = cinfo->ds->buckets[i].wlseg;
-		buckets[i].clseg = cinfo->ds->buckets[i].clseg;
-	}
-	swap(cinfo->ds->buckets, buckets);
-	cinfo->ds->nbuckets = size;
-out:
-	spin_unlock(&cinfo->inode->i_lock);
-	kfree(buckets);
-	return 0;
-}
-
 static struct pnfs_layout_segment *
 filelayout_alloc_lseg(struct pnfs_layout_hdr *layoutid,
 		      struct nfs4_layoutget_res *lgr,
@@ -938,9 +884,6 @@ static void
 filelayout_pg_init_write(struct nfs_pageio_descriptor *pgio,
 			 struct nfs_page *req)
 {
-	struct nfs_commit_info cinfo;
-	int status;
-
 	pnfs_generic_pg_check_layout(pgio);
 	if (!pgio->pg_lseg) {
 		pgio->pg_lseg = fl_pnfs_update_layout(pgio->pg_inode,
@@ -959,17 +902,7 @@ filelayout_pg_init_write(struct nfs_pageio_descriptor *pgio,
 
 	/* If no lseg, fall back to write through mds */
 	if (pgio->pg_lseg == NULL)
-		goto out_mds;
-	nfs_init_cinfo(&cinfo, pgio->pg_inode, pgio->pg_dreq);
-	status = filelayout_alloc_commit_info(pgio->pg_lseg, &cinfo, GFP_NOFS);
-	if (status < 0) {
-		pnfs_put_lseg(pgio->pg_lseg);
-		pgio->pg_lseg = NULL;
-		goto out_mds;
-	}
-	return;
-out_mds:
-	nfs_pageio_reset_write_mds(pgio);
+		nfs_pageio_reset_write_mds(pgio);
 }
 
 static const struct nfs_pageio_ops filelayout_pg_read_ops = {
@@ -1078,36 +1011,6 @@ static int filelayout_initiate_commit(struct nfs_commit_data *data, int how)
 	return -EAGAIN;
 }
 
-/* filelayout_search_commit_reqs - Search lists in @cinfo for the head reqest
- *				   for @page
- * @cinfo - commit info for current inode
- * @page - page to search for matching head request
- *
- * Returns a the head request if one is found, otherwise returns NULL.
- */
-static struct nfs_page *
-filelayout_search_commit_reqs(struct nfs_commit_info *cinfo, struct page *page)
-{
-	struct nfs_page *freq, *t;
-	struct pnfs_commit_bucket *b;
-	int i;
-
-	/* Linearly search the commit lists for each bucket until a matching
-	 * request is found */
-	for (i = 0, b = cinfo->ds->buckets; i < cinfo->ds->nbuckets; i++, b++) {
-		list_for_each_entry_safe(freq, t, &b->written, wb_list) {
-			if (freq->wb_page == page)
-				return freq->wb_head;
-		}
-		list_for_each_entry_safe(freq, t, &b->committing, wb_list) {
-			if (freq->wb_page == page)
-				return freq->wb_head;
-		}
-	}
-
-	return NULL;
-}
-
 static int
 filelayout_commit_pagelist(struct inode *inode, struct list_head *mds_pages,
 			   int how, struct nfs_commit_info *cinfo)
@@ -1140,13 +1043,17 @@ filelayout_alloc_layout_hdr(struct inode *inode, gfp_t gfp_flags)
 	struct nfs4_filelayout *flo;
 
 	flo = kzalloc(sizeof(*flo), gfp_flags);
-	return flo != NULL ? &flo->generic_hdr : NULL;
+	if (flo == NULL)
+		return NULL;
+	pnfs_init_ds_commit_info(&flo->commit_info);
+	flo->commit_info.ops = &filelayout_commit_ops;
+	return &flo->generic_hdr;
 }
 
 static void
 filelayout_free_layout_hdr(struct pnfs_layout_hdr *lo)
 {
-	kfree(FILELAYOUT_FROM_HDR(lo));
+	kfree_rcu(FILELAYOUT_FROM_HDR(lo), generic_hdr.plh_rcu);
 }
 
 static struct pnfs_ds_commit_info *
@@ -1160,6 +1067,46 @@ filelayout_get_ds_info(struct inode *inode)
 		return &FILELAYOUT_FROM_HDR(layout)->commit_info;
 }
 
+static void
+filelayout_setup_ds_info(struct pnfs_ds_commit_info *fl_cinfo,
+		struct pnfs_layout_segment *lseg)
+{
+	struct nfs4_filelayout_segment *fl = FILELAYOUT_LSEG(lseg);
+	struct inode *inode = lseg->pls_layout->plh_inode;
+	struct pnfs_commit_array *array, *new;
+	unsigned int size = (fl->stripe_type == STRIPE_SPARSE) ?
+		fl->dsaddr->ds_num : fl->dsaddr->stripe_count;
+
+	new = pnfs_alloc_commit_array(size, GFP_NOIO);
+	if (new) {
+		spin_lock(&inode->i_lock);
+		array = pnfs_add_commit_array(fl_cinfo, new, lseg);
+		spin_unlock(&inode->i_lock);
+		if (array != new)
+			pnfs_free_commit_array(new);
+	}
+}
+
+static void
+filelayout_release_ds_info(struct pnfs_ds_commit_info *fl_cinfo,
+		struct inode *inode)
+{
+	spin_lock(&inode->i_lock);
+	pnfs_generic_ds_cinfo_destroy(fl_cinfo);
+	spin_unlock(&inode->i_lock);
+}
+
+static const struct pnfs_commit_ops filelayout_commit_ops = {
+	.setup_ds_info		= filelayout_setup_ds_info,
+	.release_ds_info	= filelayout_release_ds_info,
+	.mark_request_commit	= filelayout_mark_request_commit,
+	.clear_request_commit	= pnfs_generic_clear_request_commit,
+	.scan_commit_lists	= pnfs_generic_scan_commit_lists,
+	.recover_commit_reqs	= pnfs_generic_recover_commit_reqs,
+	.search_commit_reqs	= pnfs_generic_search_commit_reqs,
+	.commit_pagelist	= filelayout_commit_pagelist,
+};
+
 static struct pnfs_layoutdriver_type filelayout_type = {
 	.id			= LAYOUT_NFSV4_1_FILES,
 	.name			= "LAYOUT_NFSV4_1_FILES",
@@ -1173,12 +1120,6 @@ static struct pnfs_layoutdriver_type filelayout_type = {
 	.pg_read_ops		= &filelayout_pg_read_ops,
 	.pg_write_ops		= &filelayout_pg_write_ops,
 	.get_ds_info		= &filelayout_get_ds_info,
-	.mark_request_commit	= filelayout_mark_request_commit,
-	.clear_request_commit	= pnfs_generic_clear_request_commit,
-	.scan_commit_lists	= pnfs_generic_scan_commit_lists,
-	.recover_commit_reqs	= pnfs_generic_recover_commit_reqs,
-	.search_commit_reqs	= filelayout_search_commit_reqs,
-	.commit_pagelist	= filelayout_commit_pagelist,
 	.read_pagelist		= filelayout_read_pagelist,
 	.write_pagelist		= filelayout_write_pagelist,
 	.alloc_deviceid_node	= filelayout_alloc_deviceid_node,
diff --git a/fs/nfs/flexfilelayout/flexfilelayout.c b/fs/nfs/flexfilelayout/flexfilelayout.c
index bb9148b..7d399f7 100644
--- a/fs/nfs/flexfilelayout/flexfilelayout.c
+++ b/fs/nfs/flexfilelayout/flexfilelayout.c
@@ -32,6 +32,7 @@
 
 static unsigned short io_maxretrans;
 
+static const struct pnfs_commit_ops ff_layout_commit_ops;
 static void ff_layout_read_record_layoutstats_done(struct rpc_task *task,
 		struct nfs_pgio_header *hdr);
 static int ff_layout_mirror_prepare_stats(struct pnfs_layout_hdr *lo,
@@ -48,9 +49,11 @@ ff_layout_alloc_layout_hdr(struct inode *inode, gfp_t gfp_flags)
 
 	ffl = kzalloc(sizeof(*ffl), gfp_flags);
 	if (ffl) {
+		pnfs_init_ds_commit_info(&ffl->commit_info);
 		INIT_LIST_HEAD(&ffl->error_list);
 		INIT_LIST_HEAD(&ffl->mirrors);
 		ffl->last_report_time = ktime_get();
+		ffl->commit_info.ops = &ff_layout_commit_ops;
 		return &ffl->generic_hdr;
 	} else
 		return NULL;
@@ -59,14 +62,14 @@ ff_layout_alloc_layout_hdr(struct inode *inode, gfp_t gfp_flags)
 static void
 ff_layout_free_layout_hdr(struct pnfs_layout_hdr *lo)
 {
+	struct nfs4_flexfile_layout *ffl = FF_LAYOUT_FROM_HDR(lo);
 	struct nfs4_ff_layout_ds_err *err, *n;
 
-	list_for_each_entry_safe(err, n, &FF_LAYOUT_FROM_HDR(lo)->error_list,
-				 list) {
+	list_for_each_entry_safe(err, n, &ffl->error_list, list) {
 		list_del(&err->list);
 		kfree(err);
 	}
-	kfree(FF_LAYOUT_FROM_HDR(lo));
+	kfree_rcu(ffl, generic_hdr.plh_rcu);
 }
 
 static int decode_pnfs_stateid(struct xdr_stream *xdr, nfs4_stateid *stateid)
@@ -248,36 +251,10 @@ static void ff_layout_put_mirror(struct nfs4_ff_layout_mirror *mirror)
 
 static void ff_layout_free_mirror_array(struct nfs4_ff_layout_segment *fls)
 {
-	int i;
+	u32 i;
 
-	if (fls->mirror_array) {
-		for (i = 0; i < fls->mirror_array_cnt; i++) {
-			/* normally mirror_ds is freed in
-			 * .free_deviceid_node but we still do it here
-			 * for .alloc_lseg error path */
-			ff_layout_put_mirror(fls->mirror_array[i]);
-		}
-		kfree(fls->mirror_array);
-		fls->mirror_array = NULL;
-	}
-}
-
-static int ff_layout_check_layout(struct nfs4_layoutget_res *lgr)
-{
-	int ret = 0;
-
-	dprintk("--> %s\n", __func__);
-
-	/* FIXME: remove this check when layout segment support is added */
-	if (lgr->range.offset != 0 ||
-	    lgr->range.length != NFS4_MAX_UINT64) {
-		dprintk("%s Only whole file layouts supported. Use MDS i/o\n",
-			__func__);
-		ret = -EINVAL;
-	}
-
-	dprintk("--> %s returns %d\n", __func__, ret);
-	return ret;
+	for (i = 0; i < fls->mirror_array_cnt; i++)
+		ff_layout_put_mirror(fls->mirror_array[i]);
 }
 
 static void _ff_layout_free_lseg(struct nfs4_ff_layout_segment *fls)
@@ -289,6 +266,23 @@ static void _ff_layout_free_lseg(struct nfs4_ff_layout_segment *fls)
 }
 
 static bool
+ff_lseg_match_mirrors(struct pnfs_layout_segment *l1,
+		struct pnfs_layout_segment *l2)
+{
+	const struct nfs4_ff_layout_segment *fl1 = FF_LAYOUT_LSEG(l1);
+	const struct nfs4_ff_layout_segment *fl2 = FF_LAYOUT_LSEG(l1);
+	u32 i;
+
+	if (fl1->mirror_array_cnt != fl2->mirror_array_cnt)
+		return false;
+	for (i = 0; i < fl1->mirror_array_cnt; i++) {
+		if (fl1->mirror_array[i] != fl2->mirror_array[i])
+			return false;
+	}
+	return true;
+}
+
+static bool
 ff_lseg_range_is_after(const struct pnfs_layout_range *l1,
 		const struct pnfs_layout_range *l2)
 {
@@ -323,6 +317,8 @@ ff_lseg_merge(struct pnfs_layout_segment *new,
 			new->pls_range.length);
 	if (new_end < old->pls_range.offset)
 		return false;
+	if (!ff_lseg_match_mirrors(new, old))
+		return false;
 
 	/* Mergeable: copy info from 'old' to 'new' */
 	if (new_end < old_end)
@@ -400,16 +396,13 @@ ff_layout_alloc_lseg(struct pnfs_layout_hdr *lh,
 		goto out_err_free;
 
 	rc = -ENOMEM;
-	fls = kzalloc(sizeof(*fls), gfp_flags);
+	fls = kzalloc(struct_size(fls, mirror_array, mirror_array_cnt),
+			gfp_flags);
 	if (!fls)
 		goto out_err_free;
 
 	fls->mirror_array_cnt = mirror_array_cnt;
 	fls->stripe_unit = stripe_unit;
-	fls->mirror_array = kcalloc(fls->mirror_array_cnt,
-				    sizeof(fls->mirror_array[0]), gfp_flags);
-	if (fls->mirror_array == NULL)
-		goto out_err_free;
 
 	for (i = 0; i < fls->mirror_array_cnt; i++) {
 		struct nfs4_ff_layout_mirror *mirror;
@@ -545,9 +538,6 @@ ff_layout_alloc_lseg(struct pnfs_layout_hdr *lh,
 
 out_sort_mirrors:
 	ff_layout_sort_mirrors(fls);
-	rc = ff_layout_check_layout(lgr);
-	if (rc)
-		goto out_err_free;
 	ret = &fls->generic_hdr;
 	dprintk("<-- %s (success)\n", __func__);
 out_free_page:
@@ -560,17 +550,6 @@ ff_layout_alloc_lseg(struct pnfs_layout_hdr *lh,
 	goto out_free_page;
 }
 
-static bool ff_layout_has_rw_segments(struct pnfs_layout_hdr *layout)
-{
-	struct pnfs_layout_segment *lseg;
-
-	list_for_each_entry(lseg, &layout->plh_segs, pls_list)
-		if (lseg->pls_range.iomode == IOMODE_RW)
-			return true;
-
-	return false;
-}
-
 static void
 ff_layout_free_lseg(struct pnfs_layout_segment *lseg)
 {
@@ -585,23 +564,12 @@ ff_layout_free_lseg(struct pnfs_layout_segment *lseg)
 		ffl = FF_LAYOUT_FROM_HDR(lseg->pls_layout);
 		inode = ffl->generic_hdr.plh_inode;
 		spin_lock(&inode->i_lock);
-		if (!ff_layout_has_rw_segments(lseg->pls_layout)) {
-			ffl->commit_info.nbuckets = 0;
-			kfree(ffl->commit_info.buckets);
-			ffl->commit_info.buckets = NULL;
-		}
+		pnfs_generic_ds_cinfo_release_lseg(&ffl->commit_info, lseg);
 		spin_unlock(&inode->i_lock);
 	}
 	_ff_layout_free_lseg(fls);
 }
 
-/* Return 1 until we have multiple lsegs support */
-static int
-ff_layout_get_lseg_count(struct nfs4_ff_layout_segment *fls)
-{
-	return 1;
-}
-
 static void
 nfs4_ff_start_busy_timer(struct nfs4_ff_busy_timer *timer, ktime_t now)
 {
@@ -746,52 +714,6 @@ nfs4_ff_layout_stat_io_end_write(struct rpc_task *task,
 	spin_unlock(&mirror->lock);
 }
 
-static int
-ff_layout_alloc_commit_info(struct pnfs_layout_segment *lseg,
-			    struct nfs_commit_info *cinfo,
-			    gfp_t gfp_flags)
-{
-	struct nfs4_ff_layout_segment *fls = FF_LAYOUT_LSEG(lseg);
-	struct pnfs_commit_bucket *buckets;
-	int size;
-
-	if (cinfo->ds->nbuckets != 0) {
-		/* This assumes there is only one RW lseg per file.
-		 * To support multiple lseg per file, we need to
-		 * change struct pnfs_commit_bucket to allow dynamic
-		 * increasing nbuckets.
-		 */
-		return 0;
-	}
-
-	size = ff_layout_get_lseg_count(fls) * FF_LAYOUT_MIRROR_COUNT(lseg);
-
-	buckets = kcalloc(size, sizeof(struct pnfs_commit_bucket),
-			  gfp_flags);
-	if (!buckets)
-		return -ENOMEM;
-	else {
-		int i;
-
-		spin_lock(&cinfo->inode->i_lock);
-		if (cinfo->ds->nbuckets != 0)
-			kfree(buckets);
-		else {
-			cinfo->ds->buckets = buckets;
-			cinfo->ds->nbuckets = size;
-			for (i = 0; i < size; i++) {
-				INIT_LIST_HEAD(&buckets[i].written);
-				INIT_LIST_HEAD(&buckets[i].committing);
-				/* mark direct verifier as unset */
-				buckets[i].direct_verf.committed =
-					NFS_INVALID_STABLE_HOW;
-			}
-		}
-		spin_unlock(&cinfo->inode->i_lock);
-		return 0;
-	}
-}
-
 static void
 ff_layout_mark_ds_unreachable(struct pnfs_layout_segment *lseg, int idx)
 {
@@ -876,8 +798,8 @@ ff_layout_pg_get_read(struct nfs_pageio_descriptor *pgio,
 	pnfs_put_lseg(pgio->pg_lseg);
 	pgio->pg_lseg = pnfs_update_layout(pgio->pg_inode,
 					   nfs_req_openctx(req),
-					   0,
-					   NFS4_MAX_UINT64,
+					   req_offset(req),
+					   req->wb_bytes,
 					   IOMODE_READ,
 					   strict_iomode,
 					   GFP_KERNEL);
@@ -888,6 +810,14 @@ ff_layout_pg_get_read(struct nfs_pageio_descriptor *pgio,
 }
 
 static void
+ff_layout_pg_check_layout(struct nfs_pageio_descriptor *pgio,
+			  struct nfs_page *req)
+{
+	pnfs_generic_pg_check_layout(pgio);
+	pnfs_generic_pg_check_range(pgio, req);
+}
+
+static void
 ff_layout_pg_init_read(struct nfs_pageio_descriptor *pgio,
 			struct nfs_page *req)
 {
@@ -897,7 +827,7 @@ ff_layout_pg_init_read(struct nfs_pageio_descriptor *pgio,
 	int ds_idx;
 
 retry:
-	pnfs_generic_pg_check_layout(pgio);
+	ff_layout_pg_check_layout(pgio, req);
 	/* Use full layout for now */
 	if (!pgio->pg_lseg) {
 		ff_layout_pg_get_read(pgio, req, false);
@@ -953,18 +883,16 @@ ff_layout_pg_init_write(struct nfs_pageio_descriptor *pgio,
 {
 	struct nfs4_ff_layout_mirror *mirror;
 	struct nfs_pgio_mirror *pgm;
-	struct nfs_commit_info cinfo;
 	struct nfs4_pnfs_ds *ds;
 	int i;
-	int status;
 
 retry:
-	pnfs_generic_pg_check_layout(pgio);
+	ff_layout_pg_check_layout(pgio, req);
 	if (!pgio->pg_lseg) {
 		pgio->pg_lseg = pnfs_update_layout(pgio->pg_inode,
 						   nfs_req_openctx(req),
-						   0,
-						   NFS4_MAX_UINT64,
+						   req_offset(req),
+						   req->wb_bytes,
 						   IOMODE_RW,
 						   false,
 						   GFP_NOFS);
@@ -978,11 +906,6 @@ ff_layout_pg_init_write(struct nfs_pageio_descriptor *pgio,
 	if (pgio->pg_lseg == NULL)
 		goto out_mds;
 
-	nfs_init_cinfo(&cinfo, pgio->pg_inode, pgio->pg_dreq);
-	status = ff_layout_alloc_commit_info(pgio->pg_lseg, &cinfo, GFP_NOFS);
-	if (status < 0)
-		goto out_mds;
-
 	/* Use a direct mapping of ds_idx to pgio mirror_idx */
 	if (WARN_ON_ONCE(pgio->pg_mirror_count !=
 	    FF_LAYOUT_MIRROR_COUNT(pgio->pg_lseg)))
@@ -1297,21 +1220,23 @@ static void ff_layout_io_track_ds_error(struct pnfs_layout_segment *lseg,
 		}
 	}
 
-	switch (status) {
-	case NFS4ERR_DELAY:
-	case NFS4ERR_GRACE:
-		return;
-	default:
-		break;
-	}
-
 	mirror = FF_LAYOUT_COMP(lseg, idx);
 	err = ff_layout_track_ds_error(FF_LAYOUT_FROM_HDR(lseg->pls_layout),
 				       mirror, offset, length, status, opnum,
 				       GFP_NOIO);
-	if (status == NFS4ERR_NXIO)
+
+	switch (status) {
+	case NFS4ERR_DELAY:
+	case NFS4ERR_GRACE:
+		break;
+	case NFS4ERR_NXIO:
 		ff_layout_mark_ds_unreachable(lseg, idx);
-	pnfs_error_mark_layout_for_return(lseg->pls_layout->plh_inode, lseg);
+		/* Fallthrough */
+	default:
+		pnfs_error_mark_layout_for_return(lseg->pls_layout->plh_inode,
+						  lseg);
+	}
+
 	dprintk("%s: err %d op %d status %u\n", __func__, err, opnum, status);
 }
 
@@ -2012,6 +1937,33 @@ ff_layout_get_ds_info(struct inode *inode)
 }
 
 static void
+ff_layout_setup_ds_info(struct pnfs_ds_commit_info *fl_cinfo,
+		struct pnfs_layout_segment *lseg)
+{
+	struct nfs4_ff_layout_segment *flseg = FF_LAYOUT_LSEG(lseg);
+	struct inode *inode = lseg->pls_layout->plh_inode;
+	struct pnfs_commit_array *array, *new;
+
+	new = pnfs_alloc_commit_array(flseg->mirror_array_cnt, GFP_NOIO);
+	if (new) {
+		spin_lock(&inode->i_lock);
+		array = pnfs_add_commit_array(fl_cinfo, new, lseg);
+		spin_unlock(&inode->i_lock);
+		if (array != new)
+			pnfs_free_commit_array(new);
+	}
+}
+
+static void
+ff_layout_release_ds_info(struct pnfs_ds_commit_info *fl_cinfo,
+		struct inode *inode)
+{
+	spin_lock(&inode->i_lock);
+	pnfs_generic_ds_cinfo_destroy(fl_cinfo);
+	spin_unlock(&inode->i_lock);
+}
+
+static void
 ff_layout_free_deviceid_node(struct nfs4_deviceid_node *d)
 {
 	nfs4_ff_layout_free_deviceid(container_of(d, struct nfs4_ff_layout_ds,
@@ -2496,6 +2448,16 @@ ff_layout_set_layoutdriver(struct nfs_server *server,
 	return 0;
 }
 
+static const struct pnfs_commit_ops ff_layout_commit_ops = {
+	.setup_ds_info		= ff_layout_setup_ds_info,
+	.release_ds_info	= ff_layout_release_ds_info,
+	.mark_request_commit	= pnfs_layout_mark_request_commit,
+	.clear_request_commit	= pnfs_generic_clear_request_commit,
+	.scan_commit_lists	= pnfs_generic_scan_commit_lists,
+	.recover_commit_reqs	= pnfs_generic_recover_commit_reqs,
+	.commit_pagelist	= ff_layout_commit_pagelist,
+};
+
 static struct pnfs_layoutdriver_type flexfilelayout_type = {
 	.id			= LAYOUT_FLEX_FILES,
 	.name			= "LAYOUT_FLEX_FILES",
@@ -2512,11 +2474,6 @@ static struct pnfs_layoutdriver_type flexfilelayout_type = {
 	.pg_write_ops		= &ff_layout_pg_write_ops,
 	.get_ds_info		= ff_layout_get_ds_info,
 	.free_deviceid_node	= ff_layout_free_deviceid_node,
-	.mark_request_commit	= pnfs_layout_mark_request_commit,
-	.clear_request_commit	= pnfs_generic_clear_request_commit,
-	.scan_commit_lists	= pnfs_generic_scan_commit_lists,
-	.recover_commit_reqs	= pnfs_generic_recover_commit_reqs,
-	.commit_pagelist	= ff_layout_commit_pagelist,
 	.read_pagelist		= ff_layout_read_pagelist,
 	.write_pagelist		= ff_layout_write_pagelist,
 	.alloc_deviceid_node    = ff_layout_alloc_deviceid_node,
diff --git a/fs/nfs/flexfilelayout/flexfilelayout.h b/fs/nfs/flexfilelayout/flexfilelayout.h
index 2f36996..354a031 100644
--- a/fs/nfs/flexfilelayout/flexfilelayout.h
+++ b/fs/nfs/flexfilelayout/flexfilelayout.h
@@ -99,7 +99,7 @@ struct nfs4_ff_layout_segment {
 	u64				stripe_unit;
 	u32				flags;
 	u32				mirror_array_cnt;
-	struct nfs4_ff_layout_mirror	**mirror_array;
+	struct nfs4_ff_layout_mirror	*mirror_array[];
 };
 
 struct nfs4_flexfile_layout {
diff --git a/fs/nfs/fs_context.c b/fs/nfs/fs_context.c
index e113fcb..ccc88be 100644
--- a/fs/nfs/fs_context.c
+++ b/fs/nfs/fs_context.c
@@ -190,6 +190,7 @@ static const struct constant_table nfs_vers_tokens[] = {
 	{ "4.0",	Opt_vers_4_0 },
 	{ "4.1",	Opt_vers_4_1 },
 	{ "4.2",	Opt_vers_4_2 },
+	{}
 };
 
 enum {
@@ -202,13 +203,14 @@ enum {
 	nr__Opt_xprt
 };
 
-static const struct constant_table nfs_xprt_protocol_tokens[nr__Opt_xprt] = {
+static const struct constant_table nfs_xprt_protocol_tokens[] = {
 	{ "rdma",	Opt_xprt_rdma },
 	{ "rdma6",	Opt_xprt_rdma6 },
 	{ "tcp",	Opt_xprt_tcp },
 	{ "tcp6",	Opt_xprt_tcp6 },
 	{ "udp",	Opt_xprt_udp },
 	{ "udp6",	Opt_xprt_udp6 },
+	{}
 };
 
 enum {
@@ -239,6 +241,7 @@ static const struct constant_table nfs_secflavor_tokens[] = {
 	{ "spkm3i",	Opt_sec_spkmi },
 	{ "spkm3p",	Opt_sec_spkmp },
 	{ "sys",	Opt_sec_sys },
+	{}
 };
 
 /*
@@ -1135,7 +1138,7 @@ static int nfs4_parse_monolithic(struct fs_context *fc,
 	return nfs_invalf(fc, "NFS4: mount program didn't pass remote address");
 
 out_invalid_transport_udp:
-	return nfs_invalf(fc, "NFSv4: Unsupported transport protocol udp");
+	return nfs_invalf(fc, "NFS: Unsupported transport protocol udp");
 }
 #endif
 
@@ -1257,7 +1260,7 @@ static int nfs_fs_context_validate(struct fs_context *fc)
 	nfs_errorf(fc, "NFS: NFSv4 is not compiled into kernel");
 	return -EPROTONOSUPPORT;
 out_invalid_transport_udp:
-	return nfs_invalf(fc, "NFSv4: Unsupported transport protocol udp");
+	return nfs_invalf(fc, "NFS: Unsupported transport protocol udp");
 out_no_address:
 	return nfs_invalf(fc, "NFS: mount program didn't pass remote address");
 out_mountproto_mismatch:
diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index 11bf158..b9d0921 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -62,7 +62,6 @@
 /* Default is to see 64-bit inode numbers */
 static bool enable_ino64 = NFS_64_BIT_INODE_NUMBERS_ENABLED;
 
-static void nfs_invalidate_inode(struct inode *);
 static int nfs_update_inode(struct inode *, struct nfs_fattr *);
 
 static struct kmem_cache * nfs_inode_cachep;
@@ -284,10 +283,18 @@ EXPORT_SYMBOL_GPL(nfs_invalidate_atime);
  * Invalidate, but do not unhash, the inode.
  * NB: must be called with inode->i_lock held!
  */
-static void nfs_invalidate_inode(struct inode *inode)
+static void nfs_set_inode_stale_locked(struct inode *inode)
 {
 	set_bit(NFS_INO_STALE, &NFS_I(inode)->flags);
 	nfs_zap_caches_locked(inode);
+	trace_nfs_set_inode_stale(inode);
+}
+
+void nfs_set_inode_stale(struct inode *inode)
+{
+	spin_lock(&inode->i_lock);
+	nfs_set_inode_stale_locked(inode);
+	spin_unlock(&inode->i_lock);
 }
 
 struct nfs_find_desc {
@@ -959,16 +966,16 @@ struct nfs_open_context *alloc_nfs_open_context(struct dentry *dentry,
 						struct file *filp)
 {
 	struct nfs_open_context *ctx;
-	const struct cred *cred = get_current_cred();
 
 	ctx = kmalloc(sizeof(*ctx), GFP_KERNEL);
-	if (!ctx) {
-		put_cred(cred);
+	if (!ctx)
 		return ERR_PTR(-ENOMEM);
-	}
 	nfs_sb_active(dentry->d_sb);
 	ctx->dentry = dget(dentry);
-	ctx->cred = cred;
+	if (filp)
+		ctx->cred = get_cred(filp->f_cred);
+	else
+		ctx->cred = get_current_cred();
 	ctx->ll_cred = NULL;
 	ctx->state = NULL;
 	ctx->mode = f_mode;
@@ -1163,9 +1170,10 @@ __nfs_revalidate_inode(struct nfs_server *server, struct inode *inode)
 				status = 0;
 			break;
 		case -ESTALE:
-			nfs_zap_caches(inode);
 			if (!S_ISDIR(inode->i_mode))
-				set_bit(NFS_INO_STALE, &NFS_I(inode)->flags);
+				nfs_set_inode_stale(inode);
+			else
+				nfs_zap_caches(inode);
 		}
 		goto err_out;
 	}
@@ -2064,7 +2072,7 @@ static int nfs_update_inode(struct inode *inode, struct nfs_fattr *fattr)
 	 * lookup validation will know that the inode is bad.
 	 * (But we fall through to invalidate the caches.)
 	 */
-	nfs_invalidate_inode(inode);
+	nfs_set_inode_stale_locked(inode);
 	return -ESTALE;
 }
 
diff --git a/fs/nfs/internal.h b/fs/nfs/internal.h
index f80c47d..1f32a9f 100644
--- a/fs/nfs/internal.h
+++ b/fs/nfs/internal.h
@@ -274,12 +274,6 @@ void nfs_free_request(struct nfs_page *req);
 struct nfs_pgio_mirror *
 nfs_pgio_current_mirror(struct nfs_pageio_descriptor *desc);
 
-static inline bool nfs_pgio_has_mirroring(struct nfs_pageio_descriptor *desc)
-{
-	WARN_ON_ONCE(desc->pg_mirror_count < 1);
-	return desc->pg_mirror_count > 1;
-}
-
 static inline bool nfs_match_open_context(const struct nfs_open_context *ctx1,
 		const struct nfs_open_context *ctx2)
 {
@@ -417,7 +411,9 @@ extern int __init register_nfs_fs(void);
 extern void __exit unregister_nfs_fs(void);
 extern bool nfs_sb_active(struct super_block *sb);
 extern void nfs_sb_deactive(struct super_block *sb);
-
+extern int nfs_client_for_each_server(struct nfs_client *clp,
+				      int (*fn)(struct nfs_server *, void *),
+				      void *data);
 /* io.c */
 extern void nfs_start_io_read(struct inode *inode);
 extern void nfs_end_io_read(struct inode *inode);
@@ -515,13 +511,25 @@ int nfs_filemap_write_and_wait_range(struct address_space *mapping,
 		loff_t lstart, loff_t lend);
 
 #ifdef CONFIG_NFS_V4_1
+static inline void
+pnfs_bucket_clear_pnfs_ds_commit_verifiers(struct pnfs_commit_bucket *buckets,
+		unsigned int nbuckets)
+{
+	unsigned int i;
+
+	for (i = 0; i < nbuckets; i++)
+		buckets[i].direct_verf.committed = NFS_INVALID_STABLE_HOW;
+}
 static inline
 void nfs_clear_pnfs_ds_commit_verifiers(struct pnfs_ds_commit_info *cinfo)
 {
-	int i;
+	struct pnfs_commit_array *array;
 
-	for (i = 0; i < cinfo->nbuckets; i++)
-		cinfo->buckets[i].direct_verf.committed = NFS_INVALID_STABLE_HOW;
+	rcu_read_lock();
+	list_for_each_entry_rcu(array, &cinfo->commits, cinfo_list)
+		pnfs_bucket_clear_pnfs_ds_commit_verifiers(array->buckets,
+				array->nbuckets);
+	rcu_read_unlock();
 }
 #else
 static inline
@@ -542,6 +550,14 @@ nfs_write_verifier_cmp(const struct nfs_write_verifier *v1,
 	return memcmp(v1->data, v2->data, sizeof(v1->data));
 }
 
+static inline bool
+nfs_write_match_verf(const struct nfs_writeverf *verf,
+		struct nfs_page *req)
+{
+	return verf->committed > NFS_UNSTABLE &&
+		!nfs_write_verifier_cmp(&req->wb_verf, &verf->verifier);
+}
+
 /* unlink.c */
 extern struct rpc_task *
 nfs_async_rename(struct inode *old_dir, struct inode *new_dir,
diff --git a/fs/nfs/namespace.c b/fs/nfs/namespace.c
index f3ece8e..6b06322 100644
--- a/fs/nfs/namespace.c
+++ b/fs/nfs/namespace.c
@@ -145,6 +145,7 @@ struct vfsmount *nfs_d_automount(struct path *path)
 	struct vfsmount *mnt = ERR_PTR(-ENOMEM);
 	struct nfs_server *server = NFS_SERVER(d_inode(path->dentry));
 	struct nfs_client *client = server->nfs_client;
+	int timeout = READ_ONCE(nfs_mountpoint_expiry_timeout);
 	int ret;
 
 	if (IS_ROOT(path->dentry))
@@ -190,12 +191,12 @@ struct vfsmount *nfs_d_automount(struct path *path)
 	if (IS_ERR(mnt))
 		goto out_fc;
 
-	if (nfs_mountpoint_expiry_timeout < 0)
+	mntget(mnt); /* prevent immediate expiration */
+	if (timeout <= 0)
 		goto out_fc;
 
-	mntget(mnt); /* prevent immediate expiration */
 	mnt_set_expiry(mnt, &nfs_automount_list);
-	schedule_delayed_work(&nfs_automount_task, nfs_mountpoint_expiry_timeout);
+	schedule_delayed_work(&nfs_automount_task, timeout);
 
 out_fc:
 	put_fs_context(fc);
@@ -233,10 +234,11 @@ const struct inode_operations nfs_referral_inode_operations = {
 static void nfs_expire_automounts(struct work_struct *work)
 {
 	struct list_head *list = &nfs_automount_list;
+	int timeout = READ_ONCE(nfs_mountpoint_expiry_timeout);
 
 	mark_mounts_for_expiry(list);
-	if (!list_empty(list))
-		schedule_delayed_work(&nfs_automount_task, nfs_mountpoint_expiry_timeout);
+	if (!list_empty(list) && timeout > 0)
+		schedule_delayed_work(&nfs_automount_task, timeout);
 }
 
 void nfs_release_automount_timer(void)
@@ -247,10 +249,7 @@ void nfs_release_automount_timer(void)
 
 /**
  * nfs_do_submount - set up mountpoint when crossing a filesystem boundary
- * @dentry: parent directory
- * @fh: filehandle for new root dentry
- * @fattr: attributes for new root inode
- * @authflavor: security flavor to use when performing the mount
+ * @fc: pointer to struct nfs_fs_context
  *
  */
 int nfs_do_submount(struct fs_context *fc)
@@ -312,3 +311,53 @@ int nfs_submount(struct fs_context *fc, struct nfs_server *server)
 	return nfs_do_submount(fc);
 }
 EXPORT_SYMBOL_GPL(nfs_submount);
+
+static int param_set_nfs_timeout(const char *val, const struct kernel_param *kp)
+{
+	long num;
+	int ret;
+
+	if (!val)
+		return -EINVAL;
+	ret = kstrtol(val, 0, &num);
+	if (ret)
+		return -EINVAL;
+	if (num > 0) {
+		if (num >= INT_MAX / HZ)
+			num = INT_MAX;
+		else
+			num *= HZ;
+		*((int *)kp->arg) = num;
+		if (!list_empty(&nfs_automount_list))
+			mod_delayed_work(system_wq, &nfs_automount_task, num);
+	} else {
+		*((int *)kp->arg) = -1*HZ;
+		cancel_delayed_work(&nfs_automount_task);
+	}
+	return 0;
+}
+
+static int param_get_nfs_timeout(char *buffer, const struct kernel_param *kp)
+{
+	long num = *((int *)kp->arg);
+
+	if (num > 0) {
+		if (num >= INT_MAX - (HZ - 1))
+			num = INT_MAX / HZ;
+		else
+			num = (num + (HZ - 1)) / HZ;
+	} else
+		num = -1;
+	return scnprintf(buffer, PAGE_SIZE, "%li\n", num);
+}
+
+static const struct kernel_param_ops param_ops_nfs_timeout = {
+	.set = param_set_nfs_timeout,
+	.get = param_get_nfs_timeout,
+};
+#define param_check_nfs_timeout(name, p) __param_check(name, p, int);
+
+module_param(nfs_mountpoint_expiry_timeout, nfs_timeout, 0644);
+MODULE_PARM_DESC(nfs_mountpoint_expiry_timeout,
+		"Set the NFS automounted mountpoint timeout value (seconds)."
+		"Values <= 0 turn expiration off.");
diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h
index 8be1ba7..2b7f6dc 100644
--- a/fs/nfs/nfs4_fs.h
+++ b/fs/nfs/nfs4_fs.h
@@ -42,7 +42,9 @@ enum nfs4_client_state {
 	NFS4CLNT_LEASE_MOVED,
 	NFS4CLNT_DELEGATION_EXPIRED,
 	NFS4CLNT_RUN_MANAGER,
-	NFS4CLNT_DELEGRETURN_RUNNING,
+	NFS4CLNT_RECALL_RUNNING,
+	NFS4CLNT_RECALL_ANY_LAYOUT_READ,
+	NFS4CLNT_RECALL_ANY_LAYOUT_RW,
 };
 
 #define NFS4_RENEW_TIMEOUT		0x01
diff --git a/fs/nfs/nfs4file.c b/fs/nfs/nfs4file.c
index 1297919..8e5d622 100644
--- a/fs/nfs/nfs4file.c
+++ b/fs/nfs/nfs4file.c
@@ -252,6 +252,9 @@ static loff_t nfs42_remap_file_range(struct file *src_file, loff_t src_off,
 	if (remap_flags & ~REMAP_FILE_ADVISORY)
 		return -EINVAL;
 
+	if (IS_SWAPFILE(dst_inode) || IS_SWAPFILE(src_inode))
+		return -ETXTBSY;
+
 	/* check alignment w.r.t. clone_blksize */
 	ret = -EINVAL;
 	if (bs) {
diff --git a/fs/nfs/nfs4namespace.c b/fs/nfs/nfs4namespace.c
index 84026e7..a3ab6e2 100644
--- a/fs/nfs/nfs4namespace.c
+++ b/fs/nfs/nfs4namespace.c
@@ -354,7 +354,7 @@ static int try_location(struct fs_context *fc,
 
 /**
  * nfs_follow_referral - set up mountpoint when hitting a referral on moved error
- * @dentry: parent directory
+ * @fc: pointer to struct nfs_fs_context
  * @locations: array of NFSv4 server location information
  *
  */
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index cb34e84..512afb1 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -2346,7 +2346,7 @@ static int _nfs4_proc_open_confirm(struct nfs4_opendata *data)
 		.callback_ops = &nfs4_open_confirm_ops,
 		.callback_data = data,
 		.workqueue = nfsiod_workqueue,
-		.flags = RPC_TASK_ASYNC,
+		.flags = RPC_TASK_ASYNC | RPC_TASK_CRED_NOREF,
 	};
 	int status;
 
@@ -2511,7 +2511,7 @@ static int nfs4_run_open_task(struct nfs4_opendata *data,
 		.callback_ops = &nfs4_open_ops,
 		.callback_data = data,
 		.workqueue = nfsiod_workqueue,
-		.flags = RPC_TASK_ASYNC,
+		.flags = RPC_TASK_ASYNC | RPC_TASK_CRED_NOREF,
 	};
 	int status;
 
@@ -2790,16 +2790,19 @@ static int nfs41_check_delegation_stateid(struct nfs4_state *state)
 		return NFS_OK;
 	}
 
+	spin_lock(&delegation->lock);
 	nfs4_stateid_copy(&stateid, &delegation->stateid);
 
 	if (!test_and_clear_bit(NFS_DELEGATION_TEST_EXPIRED,
 				&delegation->flags)) {
+		spin_unlock(&delegation->lock);
 		rcu_read_unlock();
 		return NFS_OK;
 	}
 
 	if (delegation->cred)
 		cred = get_cred(delegation->cred);
+	spin_unlock(&delegation->lock);
 	rcu_read_unlock();
 	status = nfs41_test_and_free_expired_stateid(server, &stateid, cred);
 	trace_nfs4_test_delegation_stateid(state, NULL, status);
@@ -3651,7 +3654,7 @@ int nfs4_do_close(struct nfs4_state *state, gfp_t gfp_mask, int wait)
 		.rpc_message = &msg,
 		.callback_ops = &nfs4_close_ops,
 		.workqueue = nfsiod_workqueue,
-		.flags = RPC_TASK_ASYNC,
+		.flags = RPC_TASK_ASYNC | RPC_TASK_CRED_NOREF,
 	};
 	int status = -ENOMEM;
 
@@ -5544,7 +5547,7 @@ static int buf_to_pages_noslab(const void *buf, size_t buflen,
 struct nfs4_cached_acl {
 	int cached;
 	size_t len;
-	char data[0];
+	char data[];
 };
 
 static void nfs4_set_cached_acl(struct inode *inode, struct nfs4_cached_acl *acl)
@@ -6253,6 +6256,7 @@ static void nfs4_delegreturn_done(struct rpc_task *task, void *calldata)
 		/* Fallthrough */
 	case -NFS4ERR_BAD_STATEID:
 	case -NFS4ERR_STALE_STATEID:
+	case -ETIMEDOUT:
 		task->tk_status = 0;
 		break;
 	case -NFS4ERR_OLD_STATEID:
@@ -6343,7 +6347,7 @@ static int _nfs4_proc_delegreturn(struct inode *inode, const struct cred *cred,
 		.rpc_client = server->client,
 		.rpc_message = &msg,
 		.callback_ops = &nfs4_delegreturn_ops,
-		.flags = RPC_TASK_ASYNC,
+		.flags = RPC_TASK_ASYNC | RPC_TASK_CRED_NOREF | RPC_TASK_TIMEOUT,
 	};
 	int status = 0;
 
@@ -6926,7 +6930,7 @@ static int _nfs4_do_setlk(struct nfs4_state *state, int cmd, struct file_lock *f
 		.rpc_message = &msg,
 		.callback_ops = &nfs4_lock_ops,
 		.workqueue = nfsiod_workqueue,
-		.flags = RPC_TASK_ASYNC,
+		.flags = RPC_TASK_ASYNC | RPC_TASK_CRED_NOREF,
 	};
 	int ret;
 
@@ -9170,7 +9174,7 @@ nfs4_proc_layoutget(struct nfs4_layoutget *lgp, long *timeout)
 		.rpc_message = &msg,
 		.callback_ops = &nfs4_layoutget_call_ops,
 		.callback_data = lgp,
-		.flags = RPC_TASK_ASYNC,
+		.flags = RPC_TASK_ASYNC | RPC_TASK_CRED_NOREF,
 	};
 	struct pnfs_layout_segment *lseg = NULL;
 	struct nfs4_exception exception = {
@@ -9287,6 +9291,7 @@ static void nfs4_layoutreturn_release(void *calldata)
 		lrp->ld_private.ops->free(&lrp->ld_private);
 	pnfs_put_layout_hdr(lrp->args.layout);
 	nfs_iput_and_deactive(lrp->inode);
+	put_cred(lrp->cred);
 	kfree(calldata);
 	dprintk("<-- %s\n", __func__);
 }
diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c
index f7723d2..ac93715 100644
--- a/fs/nfs/nfs4state.c
+++ b/fs/nfs/nfs4state.c
@@ -2524,6 +2524,21 @@ static int nfs4_bind_conn_to_session(struct nfs_client *clp)
 	}
 	return 0;
 }
+
+static void nfs4_layoutreturn_any_run(struct nfs_client *clp)
+{
+	int iomode = 0;
+
+	if (test_and_clear_bit(NFS4CLNT_RECALL_ANY_LAYOUT_READ, &clp->cl_state))
+		iomode += IOMODE_READ;
+	if (test_and_clear_bit(NFS4CLNT_RECALL_ANY_LAYOUT_RW, &clp->cl_state))
+		iomode += IOMODE_RW;
+	/* Note: IOMODE_READ + IOMODE_RW == IOMODE_ANY */
+	if (iomode) {
+		pnfs_layout_return_unused_byclid(clp, iomode);
+		set_bit(NFS4CLNT_RUN_MANAGER, &clp->cl_state);
+	}
+}
 #else /* CONFIG_NFS_V4_1 */
 static int nfs4_reset_session(struct nfs_client *clp) { return 0; }
 
@@ -2531,6 +2546,10 @@ static int nfs4_bind_conn_to_session(struct nfs_client *clp)
 {
 	return 0;
 }
+
+static void nfs4_layoutreturn_any_run(struct nfs_client *clp)
+{
+}
 #endif /* CONFIG_NFS_V4_1 */
 
 static void nfs4_state_manager(struct nfs_client *clp)
@@ -2635,12 +2654,13 @@ static void nfs4_state_manager(struct nfs_client *clp)
 		nfs4_end_drain_session(clp);
 		nfs4_clear_state_manager_bit(clp);
 
-		if (!test_and_set_bit(NFS4CLNT_DELEGRETURN_RUNNING, &clp->cl_state)) {
+		if (!test_and_set_bit(NFS4CLNT_RECALL_RUNNING, &clp->cl_state)) {
 			if (test_and_clear_bit(NFS4CLNT_DELEGRETURN, &clp->cl_state)) {
 				nfs_client_return_marked_delegations(clp);
 				set_bit(NFS4CLNT_RUN_MANAGER, &clp->cl_state);
 			}
-			clear_bit(NFS4CLNT_DELEGRETURN_RUNNING, &clp->cl_state);
+			nfs4_layoutreturn_any_run(clp);
+			clear_bit(NFS4CLNT_RECALL_RUNNING, &clp->cl_state);
 		}
 
 		/* Did we race with an attempt to give us more work? */
diff --git a/fs/nfs/nfs4trace.h b/fs/nfs/nfs4trace.h
index 1e97e5e..5435411 100644
--- a/fs/nfs/nfs4trace.h
+++ b/fs/nfs/nfs4trace.h
@@ -584,7 +584,9 @@ TRACE_DEFINE_ENUM(NFS4CLNT_MOVED);
 TRACE_DEFINE_ENUM(NFS4CLNT_LEASE_MOVED);
 TRACE_DEFINE_ENUM(NFS4CLNT_DELEGATION_EXPIRED);
 TRACE_DEFINE_ENUM(NFS4CLNT_RUN_MANAGER);
-TRACE_DEFINE_ENUM(NFS4CLNT_DELEGRETURN_RUNNING);
+TRACE_DEFINE_ENUM(NFS4CLNT_RECALL_RUNNING);
+TRACE_DEFINE_ENUM(NFS4CLNT_RECALL_ANY_LAYOUT_READ);
+TRACE_DEFINE_ENUM(NFS4CLNT_RECALL_ANY_LAYOUT_RW);
 
 #define show_nfs4_clp_state(state) \
 	__print_flags(state, "|", \
@@ -605,7 +607,9 @@ TRACE_DEFINE_ENUM(NFS4CLNT_DELEGRETURN_RUNNING);
 		{ NFS4CLNT_LEASE_MOVED,		"LEASE_MOVED" }, \
 		{ NFS4CLNT_DELEGATION_EXPIRED,	"DELEGATION_EXPIRED" }, \
 		{ NFS4CLNT_RUN_MANAGER,		"RUN_MANAGER" }, \
-		{ NFS4CLNT_DELEGRETURN_RUNNING,	"DELEGRETURN_RUNNING" })
+		{ NFS4CLNT_RECALL_RUNNING,	"RECALL_RUNNING" }, \
+		{ NFS4CLNT_RECALL_ANY_LAYOUT_READ, "RECALL_ANY_LAYOUT_READ" }, \
+		{ NFS4CLNT_RECALL_ANY_LAYOUT_RW, "RECALL_ANY_LAYOUT_RW" })
 
 TRACE_EVENT(nfs4_state_mgr,
 		TP_PROTO(
diff --git a/fs/nfs/nfsroot.c b/fs/nfs/nfsroot.c
index effaa42..8d32788 100644
--- a/fs/nfs/nfsroot.c
+++ b/fs/nfs/nfsroot.c
@@ -88,7 +88,7 @@
 #define NFS_ROOT		"/tftpboot/%s"
 
 /* Default NFSROOT mount options. */
-#define NFS_DEF_OPTIONS		"vers=2,udp,rsize=4096,wsize=4096"
+#define NFS_DEF_OPTIONS		"vers=2,tcp,rsize=4096,wsize=4096"
 
 /* Parameters passed from the kernel command line */
 static char nfs_root_parms[NFS_MAXPATHLEN + 1] __initdata = "";
diff --git a/fs/nfs/nfstrace.h b/fs/nfs/nfstrace.h
index a9588d1..7e7a97a 100644
--- a/fs/nfs/nfstrace.h
+++ b/fs/nfs/nfstrace.h
@@ -181,6 +181,7 @@ DECLARE_EVENT_CLASS(nfs_inode_event_done,
 				int error \
 			), \
 			TP_ARGS(inode, error))
+DEFINE_NFS_INODE_EVENT(nfs_set_inode_stale);
 DEFINE_NFS_INODE_EVENT(nfs_refresh_inode_enter);
 DEFINE_NFS_INODE_EVENT_DONE(nfs_refresh_inode_exit);
 DEFINE_NFS_INODE_EVENT(nfs_revalidate_inode_enter);
diff --git a/fs/nfs/pagelist.c b/fs/nfs/pagelist.c
index 20b3717..f61f966 100644
--- a/fs/nfs/pagelist.c
+++ b/fs/nfs/pagelist.c
@@ -33,9 +33,7 @@ static const struct rpc_call_ops nfs_pgio_common_ops;
 struct nfs_pgio_mirror *
 nfs_pgio_current_mirror(struct nfs_pageio_descriptor *desc)
 {
-	return nfs_pgio_has_mirroring(desc) ?
-		&desc->pg_mirrors[desc->pg_mirror_idx] :
-		&desc->pg_mirrors[0];
+	return &desc->pg_mirrors[desc->pg_mirror_idx];
 }
 EXPORT_SYMBOL_GPL(nfs_pgio_current_mirror);
 
@@ -133,8 +131,139 @@ nfs_async_iocounter_wait(struct rpc_task *task, struct nfs_lock_context *l_ctx)
 EXPORT_SYMBOL_GPL(nfs_async_iocounter_wait);
 
 /*
+ * nfs_page_lock_head_request - page lock the head of the page group
+ * @req: any member of the page group
+ */
+struct nfs_page *
+nfs_page_group_lock_head(struct nfs_page *req)
+{
+	struct nfs_page *head = req->wb_head;
+
+	while (!nfs_lock_request(head)) {
+		int ret = nfs_wait_on_request(head);
+		if (ret < 0)
+			return ERR_PTR(ret);
+	}
+	if (head != req)
+		kref_get(&head->wb_kref);
+	return head;
+}
+
+/*
+ * nfs_unroll_locks -  unlock all newly locked reqs and wait on @req
+ * @head: head request of page group, must be holding head lock
+ * @req: request that couldn't lock and needs to wait on the req bit lock
+ *
+ * This is a helper function for nfs_lock_and_join_requests
+ * returns 0 on success, < 0 on error.
+ */
+static void
+nfs_unroll_locks(struct nfs_page *head, struct nfs_page *req)
+{
+	struct nfs_page *tmp;
+
+	/* relinquish all the locks successfully grabbed this run */
+	for (tmp = head->wb_this_page ; tmp != req; tmp = tmp->wb_this_page) {
+		if (!kref_read(&tmp->wb_kref))
+			continue;
+		nfs_unlock_and_release_request(tmp);
+	}
+}
+
+/*
+ * nfs_page_group_lock_subreq -  try to lock a subrequest
+ * @head: head request of page group
+ * @subreq: request to lock
+ *
+ * This is a helper function for nfs_lock_and_join_requests which
+ * must be called with the head request and page group both locked.
+ * On error, it returns with the page group unlocked.
+ */
+static int
+nfs_page_group_lock_subreq(struct nfs_page *head, struct nfs_page *subreq)
+{
+	int ret;
+
+	if (!kref_get_unless_zero(&subreq->wb_kref))
+		return 0;
+	while (!nfs_lock_request(subreq)) {
+		nfs_page_group_unlock(head);
+		ret = nfs_wait_on_request(subreq);
+		if (!ret)
+			ret = nfs_page_group_lock(head);
+		if (ret < 0) {
+			nfs_unroll_locks(head, subreq);
+			nfs_release_request(subreq);
+			return ret;
+		}
+	}
+	return 0;
+}
+
+/*
+ * nfs_page_group_lock_subrequests -  try to lock the subrequests
+ * @head: head request of page group
+ *
+ * This is a helper function for nfs_lock_and_join_requests which
+ * must be called with the head request locked.
+ */
+int nfs_page_group_lock_subrequests(struct nfs_page *head)
+{
+	struct nfs_page *subreq;
+	int ret;
+
+	ret = nfs_page_group_lock(head);
+	if (ret < 0)
+		return ret;
+	/* lock each request in the page group */
+	for (subreq = head->wb_this_page; subreq != head;
+			subreq = subreq->wb_this_page) {
+		ret = nfs_page_group_lock_subreq(head, subreq);
+		if (ret < 0)
+			return ret;
+	}
+	nfs_page_group_unlock(head);
+	return 0;
+}
+
+/*
+ * nfs_page_set_headlock - set the request PG_HEADLOCK
+ * @req: request that is to be locked
+ *
+ * this lock must be held when modifying req->wb_head
+ *
+ * return 0 on success, < 0 on error
+ */
+int
+nfs_page_set_headlock(struct nfs_page *req)
+{
+	if (!test_and_set_bit(PG_HEADLOCK, &req->wb_flags))
+		return 0;
+
+	set_bit(PG_CONTENDED1, &req->wb_flags);
+	smp_mb__after_atomic();
+	return wait_on_bit_lock(&req->wb_flags, PG_HEADLOCK,
+				TASK_UNINTERRUPTIBLE);
+}
+
+/*
+ * nfs_page_clear_headlock - clear the request PG_HEADLOCK
+ * @req: request that is to be locked
+ */
+void
+nfs_page_clear_headlock(struct nfs_page *req)
+{
+	smp_mb__before_atomic();
+	clear_bit(PG_HEADLOCK, &req->wb_flags);
+	smp_mb__after_atomic();
+	if (!test_bit(PG_CONTENDED1, &req->wb_flags))
+		return;
+	wake_up_bit(&req->wb_flags, PG_HEADLOCK);
+}
+
+/*
  * nfs_page_group_lock - lock the head of the page group
- * @req - request in group that is to be locked
+ * @req: request in group that is to be locked
  *
  * this lock must be held when traversing or modifying the page
  * group list
@@ -144,36 +273,24 @@ EXPORT_SYMBOL_GPL(nfs_async_iocounter_wait);
 int
 nfs_page_group_lock(struct nfs_page *req)
 {
-	struct nfs_page *head = req->wb_head;
+	int ret;
 
-	WARN_ON_ONCE(head != head->wb_head);
-
-	if (!test_and_set_bit(PG_HEADLOCK, &head->wb_flags))
-		return 0;
-
-	set_bit(PG_CONTENDED1, &head->wb_flags);
-	smp_mb__after_atomic();
-	return wait_on_bit_lock(&head->wb_flags, PG_HEADLOCK,
-				TASK_UNINTERRUPTIBLE);
+	ret = nfs_page_set_headlock(req);
+	if (ret || req->wb_head == req)
+		return ret;
+	return nfs_page_set_headlock(req->wb_head);
 }
 
 /*
  * nfs_page_group_unlock - unlock the head of the page group
- * @req - request in group that is to be unlocked
+ * @req: request in group that is to be unlocked
  */
 void
 nfs_page_group_unlock(struct nfs_page *req)
 {
-	struct nfs_page *head = req->wb_head;
-
-	WARN_ON_ONCE(head != head->wb_head);
-
-	smp_mb__before_atomic();
-	clear_bit(PG_HEADLOCK, &head->wb_flags);
-	smp_mb__after_atomic();
-	if (!test_bit(PG_CONTENDED1, &head->wb_flags))
-		return;
-	wake_up_bit(&head->wb_flags, PG_HEADLOCK);
+	if (req != req->wb_head)
+		nfs_page_clear_headlock(req->wb_head);
+	nfs_page_clear_headlock(req);
 }
 
 /*
@@ -359,15 +476,23 @@ nfs_create_request(struct nfs_open_context *ctx, struct page *page,
 }
 
 static struct nfs_page *
-nfs_create_subreq(struct nfs_page *req, struct nfs_page *last,
-		  unsigned int pgbase, unsigned int offset,
+nfs_create_subreq(struct nfs_page *req,
+		  unsigned int pgbase,
+		  unsigned int offset,
 		  unsigned int count)
 {
+	struct nfs_page *last;
 	struct nfs_page *ret;
 
 	ret = __nfs_create_request(req->wb_lock_context, req->wb_page,
 			pgbase, offset, count);
 	if (!IS_ERR(ret)) {
+		/* find the last request */
+		for (last = req->wb_head;
+		     last->wb_this_page != req->wb_head;
+		     last = last->wb_this_page)
+			;
+
 		nfs_lock_request(ret);
 		ret->wb_index = req->wb_index;
 		nfs_page_group_init(ret, last);
@@ -627,9 +752,8 @@ int nfs_initiate_pgio(struct rpc_clnt *clnt, struct nfs_pgio_header *hdr,
 		.callback_ops = call_ops,
 		.callback_data = hdr,
 		.workqueue = nfsiod_workqueue,
-		.flags = RPC_TASK_ASYNC | flags,
+		.flags = RPC_TASK_ASYNC | RPC_TASK_CRED_NOREF | flags,
 	};
-	int ret = 0;
 
 	hdr->rw_ops->rw_initiate(hdr, &msg, rpc_ops, &task_setup_data, how);
 
@@ -641,18 +765,10 @@ int nfs_initiate_pgio(struct rpc_clnt *clnt, struct nfs_pgio_header *hdr,
 		(unsigned long long)hdr->args.offset);
 
 	task = rpc_run_task(&task_setup_data);
-	if (IS_ERR(task)) {
-		ret = PTR_ERR(task);
-		goto out;
-	}
-	if (how & FLUSH_SYNC) {
-		ret = rpc_wait_for_completion_task(task);
-		if (ret == 0)
-			ret = task->tk_status;
-	}
+	if (IS_ERR(task))
+		return PTR_ERR(task);
 	rpc_put_task(task);
-out:
-	return ret;
+	return 0;
 }
 EXPORT_SYMBOL_GPL(nfs_initiate_pgio);
 
@@ -886,15 +1002,6 @@ static void nfs_pageio_setup_mirroring(struct nfs_pageio_descriptor *pgio,
 	pgio->pg_mirror_count = mirror_count;
 }
 
-/*
- * nfs_pageio_stop_mirroring - stop using mirroring (set mirror count to 1)
- */
-void nfs_pageio_stop_mirroring(struct nfs_pageio_descriptor *pgio)
-{
-	pgio->pg_mirror_count = 1;
-	pgio->pg_mirror_idx = 0;
-}
-
 static void nfs_pageio_cleanup_mirroring(struct nfs_pageio_descriptor *pgio)
 {
 	pgio->pg_mirror_count = 1;
@@ -911,7 +1018,7 @@ static bool nfs_match_lock_context(const struct nfs_lock_context *l1,
 }
 
 /**
- * nfs_can_coalesce_requests - test two requests for compatibility
+ * nfs_coalesce_size - test two requests for compatibility
  * @prev: pointer to nfs_page
  * @req: pointer to nfs_page
  * @pgio: pointer to nfs_pagio_descriptor
@@ -920,41 +1027,36 @@ static bool nfs_match_lock_context(const struct nfs_lock_context *l1,
  * page data area they describe is contiguous, and that their RPC
  * credentials, NFSv4 open state, and lockowners are the same.
  *
- * Return 'true' if this is the case, else return 'false'.
+ * Returns size of the request that can be coalesced
  */
-static bool nfs_can_coalesce_requests(struct nfs_page *prev,
+static unsigned int nfs_coalesce_size(struct nfs_page *prev,
 				      struct nfs_page *req,
 				      struct nfs_pageio_descriptor *pgio)
 {
-	size_t size;
 	struct file_lock_context *flctx;
 
 	if (prev) {
 		if (!nfs_match_open_context(nfs_req_openctx(req), nfs_req_openctx(prev)))
-			return false;
+			return 0;
 		flctx = d_inode(nfs_req_openctx(req)->dentry)->i_flctx;
 		if (flctx != NULL &&
 		    !(list_empty_careful(&flctx->flc_posix) &&
 		      list_empty_careful(&flctx->flc_flock)) &&
 		    !nfs_match_lock_context(req->wb_lock_context,
 					    prev->wb_lock_context))
-			return false;
+			return 0;
 		if (req_offset(req) != req_offset(prev) + prev->wb_bytes)
-			return false;
+			return 0;
 		if (req->wb_page == prev->wb_page) {
 			if (req->wb_pgbase != prev->wb_pgbase + prev->wb_bytes)
-				return false;
+				return 0;
 		} else {
 			if (req->wb_pgbase != 0 ||
 			    prev->wb_pgbase + prev->wb_bytes != PAGE_SIZE)
-				return false;
+				return 0;
 		}
 	}
-	size = pgio->pg_ops->pg_test(pgio, prev, req);
-	WARN_ON_ONCE(size > req->wb_bytes);
-	if (size && size < req->wb_bytes)
-		req->wb_bytes = size;
-	return size > 0;
+	return pgio->pg_ops->pg_test(pgio, prev, req);
 }
 
 /**
@@ -962,15 +1064,16 @@ static bool nfs_can_coalesce_requests(struct nfs_page *prev,
  * @desc: destination io descriptor
  * @req: request
  *
- * Returns true if the request 'req' was successfully coalesced into the
- * existing list of pages 'desc'.
+ * If the request 'req' was successfully coalesced into the existing list
+ * of pages 'desc', it returns the size of req.
  */
-static int nfs_pageio_do_add_request(struct nfs_pageio_descriptor *desc,
-				     struct nfs_page *req)
+static unsigned int
+nfs_pageio_do_add_request(struct nfs_pageio_descriptor *desc,
+		struct nfs_page *req)
 {
 	struct nfs_pgio_mirror *mirror = nfs_pgio_current_mirror(desc);
-
 	struct nfs_page *prev = NULL;
+	unsigned int size;
 
 	if (mirror->pg_count != 0) {
 		prev = nfs_list_entry(mirror->pg_list.prev);
@@ -990,11 +1093,12 @@ static int nfs_pageio_do_add_request(struct nfs_pageio_descriptor *desc,
 		return 0;
 	}
 
-	if (!nfs_can_coalesce_requests(prev, req, desc))
-		return 0;
+	size = nfs_coalesce_size(prev, req, desc);
+	if (size < req->wb_bytes)
+		return size;
 	nfs_list_move_request(req, &mirror->pg_list);
 	mirror->pg_count += req->wb_bytes;
-	return 1;
+	return req->wb_bytes;
 }
 
 /*
@@ -1034,7 +1138,8 @@ nfs_pageio_cleanup_request(struct nfs_pageio_descriptor *desc,
  * @req: request
  *
  * This may split a request into subrequests which are all part of the
- * same page group.
+ * same page group. If so, it will submit @req as the last one, to ensure
+ * the pointer to @req is still valid in case of failure.
  *
  * Returns true if the request 'req' was successfully coalesced into the
  * existing list of pages 'desc'.
@@ -1043,51 +1148,50 @@ static int __nfs_pageio_add_request(struct nfs_pageio_descriptor *desc,
 			   struct nfs_page *req)
 {
 	struct nfs_pgio_mirror *mirror = nfs_pgio_current_mirror(desc);
-
 	struct nfs_page *subreq;
-	unsigned int bytes_left = 0;
-	unsigned int offset, pgbase;
+	unsigned int size, subreq_size;
 
 	nfs_page_group_lock(req);
 
 	subreq = req;
-	bytes_left = subreq->wb_bytes;
-	offset = subreq->wb_offset;
-	pgbase = subreq->wb_pgbase;
-
-	do {
-		if (!nfs_pageio_do_add_request(desc, subreq)) {
-			/* make sure pg_test call(s) did nothing */
-			WARN_ON_ONCE(subreq->wb_bytes != bytes_left);
-			WARN_ON_ONCE(subreq->wb_offset != offset);
-			WARN_ON_ONCE(subreq->wb_pgbase != pgbase);
-
+	subreq_size = subreq->wb_bytes;
+	for(;;) {
+		size = nfs_pageio_do_add_request(desc, subreq);
+		if (size == subreq_size) {
+			/* We successfully submitted a request */
+			if (subreq == req)
+				break;
+			req->wb_pgbase += size;
+			req->wb_bytes -= size;
+			req->wb_offset += size;
+			subreq_size = req->wb_bytes;
+			subreq = req;
+			continue;
+		}
+		if (WARN_ON_ONCE(subreq != req)) {
+			nfs_page_group_unlock(req);
+			nfs_pageio_cleanup_request(desc, subreq);
+			subreq = req;
+			subreq_size = req->wb_bytes;
+			nfs_page_group_lock(req);
+		}
+		if (!size) {
+			/* Can't coalesce any more, so do I/O */
 			nfs_page_group_unlock(req);
 			desc->pg_moreio = 1;
 			nfs_pageio_doio(desc);
 			if (desc->pg_error < 0 || mirror->pg_recoalesce)
-				goto out_cleanup_subreq;
+				return 0;
 			/* retry add_request for this subreq */
 			nfs_page_group_lock(req);
 			continue;
 		}
-
-		/* check for buggy pg_test call(s) */
-		WARN_ON_ONCE(subreq->wb_bytes + subreq->wb_pgbase > PAGE_SIZE);
-		WARN_ON_ONCE(subreq->wb_bytes > bytes_left);
-		WARN_ON_ONCE(subreq->wb_bytes == 0);
-
-		bytes_left -= subreq->wb_bytes;
-		offset += subreq->wb_bytes;
-		pgbase += subreq->wb_bytes;
-
-		if (bytes_left) {
-			subreq = nfs_create_subreq(req, subreq, pgbase,
-					offset, bytes_left);
-			if (IS_ERR(subreq))
-				goto err_ptr;
-		}
-	} while (bytes_left > 0);
+		subreq = nfs_create_subreq(req, req->wb_pgbase,
+				req->wb_offset, size);
+		if (IS_ERR(subreq))
+			goto err_ptr;
+		subreq_size = size;
+	}
 
 	nfs_page_group_unlock(req);
 	return 1;
@@ -1095,10 +1199,6 @@ static int __nfs_pageio_add_request(struct nfs_pageio_descriptor *desc,
 	desc->pg_error = PTR_ERR(subreq);
 	nfs_page_group_unlock(req);
 	return 0;
-out_cleanup_subreq:
-	if (req != subreq)
-		nfs_pageio_cleanup_request(desc, subreq);
-	return 0;
 }
 
 static int nfs_do_recoalesce(struct nfs_pageio_descriptor *desc)
@@ -1167,7 +1267,7 @@ int nfs_pageio_add_request(struct nfs_pageio_descriptor *desc,
 {
 	u32 midx;
 	unsigned int pgbase, offset, bytes;
-	struct nfs_page *dupreq, *lastreq;
+	struct nfs_page *dupreq;
 
 	pgbase = req->wb_pgbase;
 	offset = req->wb_offset;
@@ -1177,38 +1277,32 @@ int nfs_pageio_add_request(struct nfs_pageio_descriptor *desc,
 	if (desc->pg_error < 0)
 		goto out_failed;
 
-	for (midx = 0; midx < desc->pg_mirror_count; midx++) {
-		if (midx) {
-			nfs_page_group_lock(req);
+	/* Create the mirror instances first, and fire them off */
+	for (midx = 1; midx < desc->pg_mirror_count; midx++) {
+		nfs_page_group_lock(req);
 
-			/* find the last request */
-			for (lastreq = req->wb_head;
-			     lastreq->wb_this_page != req->wb_head;
-			     lastreq = lastreq->wb_this_page)
-				;
+		dupreq = nfs_create_subreq(req,
+				pgbase, offset, bytes);
 
-			dupreq = nfs_create_subreq(req, lastreq,
-					pgbase, offset, bytes);
+		nfs_page_group_unlock(req);
+		if (IS_ERR(dupreq)) {
+			desc->pg_error = PTR_ERR(dupreq);
+			goto out_failed;
+		}
 
-			nfs_page_group_unlock(req);
-			if (IS_ERR(dupreq)) {
-				desc->pg_error = PTR_ERR(dupreq);
-				goto out_failed;
-			}
-		} else
-			dupreq = req;
-
-		if (nfs_pgio_has_mirroring(desc))
-			desc->pg_mirror_idx = midx;
+		desc->pg_mirror_idx = midx;
 		if (!nfs_pageio_add_request_mirror(desc, dupreq))
 			goto out_cleanup_subreq;
 	}
 
+	desc->pg_mirror_idx = 0;
+	if (!nfs_pageio_add_request_mirror(desc, req))
+		goto out_failed;
+
 	return 1;
 
 out_cleanup_subreq:
-	if (req != dupreq)
-		nfs_pageio_cleanup_request(desc, dupreq);
+	nfs_pageio_cleanup_request(desc, dupreq);
 out_failed:
 	nfs_pageio_error_cleanup(desc);
 	return 0;
@@ -1226,8 +1320,7 @@ static void nfs_pageio_complete_mirror(struct nfs_pageio_descriptor *desc,
 	struct nfs_pgio_mirror *mirror = &desc->pg_mirrors[mirror_idx];
 	u32 restore_idx = desc->pg_mirror_idx;
 
-	if (nfs_pgio_has_mirroring(desc))
-		desc->pg_mirror_idx = mirror_idx;
+	desc->pg_mirror_idx = mirror_idx;
 	for (;;) {
 		nfs_pageio_doio(desc);
 		if (desc->pg_error < 0 || !mirror->pg_recoalesce)
@@ -1320,6 +1413,14 @@ void nfs_pageio_cond_complete(struct nfs_pageio_descriptor *desc, pgoff_t index)
 	}
 }
 
+/*
+ * nfs_pageio_stop_mirroring - stop using mirroring (set mirror count to 1)
+ */
+void nfs_pageio_stop_mirroring(struct nfs_pageio_descriptor *pgio)
+{
+	nfs_pageio_complete(pgio);
+}
+
 int __init nfs_init_nfspagecache(void)
 {
 	nfs_page_cachep = kmem_cache_create("nfs_page",
diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c
index 542ea8d..b8d78f3 100644
--- a/fs/nfs/pnfs.c
+++ b/fs/nfs/pnfs.c
@@ -268,11 +268,11 @@ pnfs_free_layout_hdr(struct pnfs_layout_hdr *lo)
 	struct nfs_server *server = NFS_SERVER(lo->plh_inode);
 	struct pnfs_layoutdriver_type *ld = server->pnfs_curr_ld;
 
-	if (!list_empty(&lo->plh_layouts)) {
+	if (test_and_clear_bit(NFS_LAYOUT_HASHED, &lo->plh_flags)) {
 		struct nfs_client *clp = server->nfs_client;
 
 		spin_lock(&clp->cl_lock);
-		list_del_init(&lo->plh_layouts);
+		list_del_rcu(&lo->plh_layouts);
 		spin_unlock(&clp->cl_lock);
 	}
 	put_cred(lo->plh_lc_cred);
@@ -309,6 +309,16 @@ pnfs_put_layout_hdr(struct pnfs_layout_hdr *lo)
 	}
 }
 
+static struct inode *
+pnfs_grab_inode_layout_hdr(struct pnfs_layout_hdr *lo)
+{
+	struct inode *inode = igrab(lo->plh_inode);
+	if (inode)
+		return inode;
+	set_bit(NFS_LAYOUT_INODE_FREEING, &lo->plh_flags);
+	return NULL;
+}
+
 static void
 pnfs_set_plh_return_info(struct pnfs_layout_hdr *lo, enum pnfs_iomode iomode,
 			 u32 seq)
@@ -496,6 +506,7 @@ pnfs_init_lseg(struct pnfs_layout_hdr *lo, struct pnfs_layout_segment *lseg,
 {
 	INIT_LIST_HEAD(&lseg->pls_list);
 	INIT_LIST_HEAD(&lseg->pls_lc_list);
+	INIT_LIST_HEAD(&lseg->pls_commits);
 	refcount_set(&lseg->pls_refcount, 1);
 	set_bit(NFS_LSEG_VALID, &lseg->pls_flags);
 	lseg->pls_layout = lo;
@@ -782,9 +793,10 @@ pnfs_layout_bulk_destroy_byserver_locked(struct nfs_client *clp,
 		/* If the sb is being destroyed, just bail */
 		if (!nfs_sb_active(server->super))
 			break;
-		inode = igrab(lo->plh_inode);
+		inode = pnfs_grab_inode_layout_hdr(lo);
 		if (inode != NULL) {
-			list_del_init(&lo->plh_layouts);
+			if (test_and_clear_bit(NFS_LAYOUT_HASHED, &lo->plh_flags))
+				list_del_rcu(&lo->plh_layouts);
 			if (pnfs_layout_add_bulk_destroy_list(inode,
 						layout_list))
 				continue;
@@ -794,7 +806,6 @@ pnfs_layout_bulk_destroy_byserver_locked(struct nfs_client *clp,
 		} else {
 			rcu_read_unlock();
 			spin_unlock(&clp->cl_lock);
-			set_bit(NFS_LAYOUT_INODE_FREEING, &lo->plh_flags);
 		}
 		nfs_sb_deactive(server->super);
 		spin_lock(&clp->cl_lock);
@@ -903,10 +914,21 @@ pnfs_destroy_all_layouts(struct nfs_client *clp)
 	pnfs_destroy_layouts_byclid(clp, false);
 }
 
+static void
+pnfs_set_layout_cred(struct pnfs_layout_hdr *lo, const struct cred *cred)
+{
+	const struct cred *old;
+
+	if (cred && cred_fscmp(lo->plh_lc_cred, cred) != 0) {
+		old = xchg(&lo->plh_lc_cred, get_cred(cred));
+		put_cred(old);
+	}
+}
+
 /* update lo->plh_stateid with new if is more recent */
 void
 pnfs_set_layout_stateid(struct pnfs_layout_hdr *lo, const nfs4_stateid *new,
-			bool update_barrier)
+			const struct cred *cred, bool update_barrier)
 {
 	u32 oldseq, newseq, new_barrier = 0;
 
@@ -914,6 +936,7 @@ pnfs_set_layout_stateid(struct pnfs_layout_hdr *lo, const nfs4_stateid *new,
 	newseq = be32_to_cpu(new->seqid);
 
 	if (!pnfs_layout_is_valid(lo)) {
+		pnfs_set_layout_cred(lo, cred);
 		nfs4_stateid_copy(&lo->plh_stateid, new);
 		lo->plh_barrier = newseq;
 		pnfs_clear_layoutreturn_info(lo);
@@ -1061,7 +1084,7 @@ pnfs_alloc_init_layoutget_args(struct inode *ino,
 	lgp->args.ctx = get_nfs_open_context(ctx);
 	nfs4_stateid_copy(&lgp->args.stateid, stateid);
 	lgp->gfp_flags = gfp_flags;
-	lgp->cred = get_cred(ctx->cred);
+	lgp->cred = ctx->cred;
 	return lgp;
 }
 
@@ -1072,7 +1095,6 @@ void pnfs_layoutget_free(struct nfs4_layoutget *lgp)
 	nfs4_free_pages(lgp->args.layout.pages, max_pages);
 	if (lgp->args.inode)
 		pnfs_put_layout_hdr(NFS_I(lgp->args.inode)->layout);
-	put_cred(lgp->cred);
 	put_nfs_open_context(lgp->args.ctx);
 	kfree(lgp);
 }
@@ -1109,7 +1131,7 @@ void pnfs_layoutreturn_free_lsegs(struct pnfs_layout_hdr *lo,
 
 		pnfs_mark_matching_lsegs_invalid(lo, &freeme, range, seq);
 		pnfs_free_returned_lsegs(lo, &freeme, range, seq);
-		pnfs_set_layout_stateid(lo, stateid, true);
+		pnfs_set_layout_stateid(lo, stateid, NULL, true);
 	} else
 		pnfs_mark_layout_stateid_invalid(lo, &freeme);
 out_unlock:
@@ -1122,6 +1144,7 @@ void pnfs_layoutreturn_free_lsegs(struct pnfs_layout_hdr *lo,
 static bool
 pnfs_prepare_layoutreturn(struct pnfs_layout_hdr *lo,
 		nfs4_stateid *stateid,
+		const struct cred **cred,
 		enum pnfs_iomode *iomode)
 {
 	/* Serialise LAYOUTGET/LAYOUTRETURN */
@@ -1132,18 +1155,17 @@ pnfs_prepare_layoutreturn(struct pnfs_layout_hdr *lo,
 	set_bit(NFS_LAYOUT_RETURN, &lo->plh_flags);
 	pnfs_get_layout_hdr(lo);
 	if (test_bit(NFS_LAYOUT_RETURN_REQUESTED, &lo->plh_flags)) {
-		if (stateid != NULL) {
-			nfs4_stateid_copy(stateid, &lo->plh_stateid);
-			if (lo->plh_return_seq != 0)
-				stateid->seqid = cpu_to_be32(lo->plh_return_seq);
-		}
+		nfs4_stateid_copy(stateid, &lo->plh_stateid);
+		*cred = get_cred(lo->plh_lc_cred);
+		if (lo->plh_return_seq != 0)
+			stateid->seqid = cpu_to_be32(lo->plh_return_seq);
 		if (iomode != NULL)
 			*iomode = lo->plh_return_iomode;
 		pnfs_clear_layoutreturn_info(lo);
 		return true;
 	}
-	if (stateid != NULL)
-		nfs4_stateid_copy(stateid, &lo->plh_stateid);
+	nfs4_stateid_copy(stateid, &lo->plh_stateid);
+	*cred = get_cred(lo->plh_lc_cred);
 	if (iomode != NULL)
 		*iomode = IOMODE_ANY;
 	return true;
@@ -1167,20 +1189,26 @@ pnfs_init_layoutreturn_args(struct nfs4_layoutreturn_args *args,
 }
 
 static int
-pnfs_send_layoutreturn(struct pnfs_layout_hdr *lo, const nfs4_stateid *stateid,
-		       enum pnfs_iomode iomode, bool sync)
+pnfs_send_layoutreturn(struct pnfs_layout_hdr *lo,
+		       const nfs4_stateid *stateid,
+		       const struct cred **pcred,
+		       enum pnfs_iomode iomode,
+		       bool sync)
 {
 	struct inode *ino = lo->plh_inode;
 	struct pnfs_layoutdriver_type *ld = NFS_SERVER(ino)->pnfs_curr_ld;
 	struct nfs4_layoutreturn *lrp;
+	const struct cred *cred = *pcred;
 	int status = 0;
 
+	*pcred = NULL;
 	lrp = kzalloc(sizeof(*lrp), GFP_NOFS);
 	if (unlikely(lrp == NULL)) {
 		status = -ENOMEM;
 		spin_lock(&ino->i_lock);
 		pnfs_clear_layoutreturn_waitbit(lo);
 		spin_unlock(&ino->i_lock);
+		put_cred(cred);
 		pnfs_put_layout_hdr(lo);
 		goto out;
 	}
@@ -1188,7 +1216,7 @@ pnfs_send_layoutreturn(struct pnfs_layout_hdr *lo, const nfs4_stateid *stateid,
 	pnfs_init_layoutreturn_args(&lrp->args, lo, stateid, iomode);
 	lrp->args.ld_private = &lrp->ld_private;
 	lrp->clp = NFS_SERVER(ino)->nfs_client;
-	lrp->cred = lo->plh_lc_cred;
+	lrp->cred = cred;
 	if (ld->prepare_layoutreturn)
 		ld->prepare_layoutreturn(&lrp->args);
 
@@ -1233,15 +1261,16 @@ static void pnfs_layoutreturn_before_put_layout_hdr(struct pnfs_layout_hdr *lo)
 		return;
 	spin_lock(&inode->i_lock);
 	if (pnfs_layout_need_return(lo)) {
+		const struct cred *cred;
 		nfs4_stateid stateid;
 		enum pnfs_iomode iomode;
 		bool send;
 
-		send = pnfs_prepare_layoutreturn(lo, &stateid, &iomode);
+		send = pnfs_prepare_layoutreturn(lo, &stateid, &cred, &iomode);
 		spin_unlock(&inode->i_lock);
 		if (send) {
 			/* Send an async layoutreturn so we dont deadlock */
-			pnfs_send_layoutreturn(lo, &stateid, iomode, false);
+			pnfs_send_layoutreturn(lo, &stateid, &cred, iomode, false);
 		}
 	} else
 		spin_unlock(&inode->i_lock);
@@ -1261,6 +1290,7 @@ _pnfs_return_layout(struct inode *ino)
 	struct pnfs_layout_hdr *lo = NULL;
 	struct nfs_inode *nfsi = NFS_I(ino);
 	LIST_HEAD(tmp_list);
+	const struct cred *cred;
 	nfs4_stateid stateid;
 	int status = 0;
 	bool send, valid_layout;
@@ -1305,10 +1335,10 @@ _pnfs_return_layout(struct inode *ino)
 		goto out_put_layout_hdr;
 	}
 
-	send = pnfs_prepare_layoutreturn(lo, &stateid, NULL);
+	send = pnfs_prepare_layoutreturn(lo, &stateid, &cred, NULL);
 	spin_unlock(&ino->i_lock);
 	if (send)
-		status = pnfs_send_layoutreturn(lo, &stateid, IOMODE_ANY, true);
+		status = pnfs_send_layoutreturn(lo, &stateid, &cred, IOMODE_ANY, true);
 out_put_layout_hdr:
 	pnfs_free_lseg_list(&tmp_list);
 	pnfs_put_layout_hdr(lo);
@@ -1354,6 +1384,7 @@ bool pnfs_roc(struct inode *ino,
 	struct nfs4_state *state;
 	struct pnfs_layout_hdr *lo;
 	struct pnfs_layout_segment *lseg, *next;
+	const struct cred *lc_cred;
 	nfs4_stateid stateid;
 	enum pnfs_iomode iomode = 0;
 	bool layoutreturn = false, roc = false;
@@ -1423,16 +1454,20 @@ bool pnfs_roc(struct inode *ino,
 	 * 2. we don't send layoutreturn
 	 */
 	/* lo ref dropped in pnfs_roc_release() */
-	layoutreturn = pnfs_prepare_layoutreturn(lo, &stateid, &iomode);
+	layoutreturn = pnfs_prepare_layoutreturn(lo, &stateid, &lc_cred, &iomode);
 	/* If the creds don't match, we can't compound the layoutreturn */
-	if (!layoutreturn || cred_fscmp(cred, lo->plh_lc_cred) != 0)
+	if (!layoutreturn)
 		goto out_noroc;
+	if (cred_fscmp(cred, lc_cred) != 0)
+		goto out_noroc_put_cred;
 
 	roc = layoutreturn;
 	pnfs_init_layoutreturn_args(args, lo, &stateid, iomode);
 	res->lrs_present = 0;
 	layoutreturn = false;
 
+out_noroc_put_cred:
+	put_cred(lc_cred);
 out_noroc:
 	spin_unlock(&ino->i_lock);
 	rcu_read_unlock();
@@ -1445,7 +1480,7 @@ bool pnfs_roc(struct inode *ino,
 		return true;
 	}
 	if (layoutreturn)
-		pnfs_send_layoutreturn(lo, &stateid, iomode, true);
+		pnfs_send_layoutreturn(lo, &stateid, &lc_cred, iomode, true);
 	pnfs_put_layout_hdr(lo);
 	return false;
 }
@@ -1859,15 +1894,14 @@ static void pnfs_clear_first_layoutget(struct pnfs_layout_hdr *lo)
 static void _add_to_server_list(struct pnfs_layout_hdr *lo,
 				struct nfs_server *server)
 {
-	if (list_empty(&lo->plh_layouts)) {
+	if (!test_and_set_bit(NFS_LAYOUT_HASHED, &lo->plh_flags)) {
 		struct nfs_client *clp = server->nfs_client;
 
 		/* The lo must be on the clp list if there is any
 		 * chance of a CB_LAYOUTRECALL(FILE) coming in.
 		 */
 		spin_lock(&clp->cl_lock);
-		if (list_empty(&lo->plh_layouts))
-			list_add_tail(&lo->plh_layouts, &server->layouts);
+		list_add_tail_rcu(&lo->plh_layouts, &server->layouts);
 		spin_unlock(&clp->cl_lock);
 	}
 }
@@ -1989,6 +2023,7 @@ pnfs_update_layout(struct inode *ino,
 			goto lookup_again;
 		}
 
+		spin_unlock(&ino->i_lock);
 		first = true;
 		status = nfs4_select_rw_stateid(ctx->state,
 					iomode == IOMODE_RW ? FMODE_WRITE : FMODE_READ,
@@ -1998,12 +2033,12 @@ pnfs_update_layout(struct inode *ino,
 			trace_pnfs_update_layout(ino, pos, count,
 					iomode, lo, lseg,
 					PNFS_UPDATE_LAYOUT_INVALID_OPEN);
-			spin_unlock(&ino->i_lock);
 			nfs4_schedule_stateid_recovery(server, ctx->state);
 			pnfs_clear_first_layoutget(lo);
 			pnfs_put_layout_hdr(lo);
 			goto lookup_again;
 		}
+		spin_lock(&ino->i_lock);
 	} else {
 		nfs4_stateid_copy(&stateid, &lo->plh_stateid);
 	}
@@ -2323,14 +2358,14 @@ pnfs_layout_process(struct nfs4_layoutget *lgp)
 
 	if (!pnfs_layout_is_valid(lo)) {
 		/* We have a completely new layout */
-		pnfs_set_layout_stateid(lo, &res->stateid, true);
+		pnfs_set_layout_stateid(lo, &res->stateid, lgp->cred, true);
 	} else if (nfs4_stateid_match_other(&lo->plh_stateid, &res->stateid)) {
 		/* existing state ID, make sure the sequence number matches. */
 		if (pnfs_layout_stateid_blocked(lo, &res->stateid)) {
 			dprintk("%s forget reply due to sequence\n", __func__);
 			goto out_forget;
 		}
-		pnfs_set_layout_stateid(lo, &res->stateid, false);
+		pnfs_set_layout_stateid(lo, &res->stateid, lgp->cred, false);
 	} else {
 		/*
 		 * We got an entirely new state ID.  Mark all segments for the
@@ -2423,43 +2458,159 @@ pnfs_mark_matching_lsegs_return(struct pnfs_layout_hdr *lo,
 	return -ENOENT;
 }
 
-void pnfs_error_mark_layout_for_return(struct inode *inode,
-				       struct pnfs_layout_segment *lseg)
+static void
+pnfs_mark_layout_for_return(struct inode *inode,
+			    const struct pnfs_layout_range *range)
 {
-	struct pnfs_layout_hdr *lo = NFS_I(inode)->layout;
-	struct pnfs_layout_range range = {
-		.iomode = lseg->pls_range.iomode,
-		.offset = 0,
-		.length = NFS4_MAX_UINT64,
-	};
+	struct pnfs_layout_hdr *lo;
 	bool return_now = false;
 
 	spin_lock(&inode->i_lock);
+	lo = NFS_I(inode)->layout;
 	if (!pnfs_layout_is_valid(lo)) {
 		spin_unlock(&inode->i_lock);
 		return;
 	}
-	pnfs_set_plh_return_info(lo, range.iomode, 0);
+	pnfs_set_plh_return_info(lo, range->iomode, 0);
 	/*
 	 * mark all matching lsegs so that we are sure to have no live
 	 * segments at hand when sending layoutreturn. See pnfs_put_lseg()
 	 * for how it works.
 	 */
-	if (pnfs_mark_matching_lsegs_return(lo, &lo->plh_return_segs, &range, 0) != -EBUSY) {
+	if (pnfs_mark_matching_lsegs_return(lo, &lo->plh_return_segs, range, 0) != -EBUSY) {
+		const struct cred *cred;
 		nfs4_stateid stateid;
 		enum pnfs_iomode iomode;
 
-		return_now = pnfs_prepare_layoutreturn(lo, &stateid, &iomode);
+		return_now = pnfs_prepare_layoutreturn(lo, &stateid, &cred, &iomode);
 		spin_unlock(&inode->i_lock);
 		if (return_now)
-			pnfs_send_layoutreturn(lo, &stateid, iomode, false);
+			pnfs_send_layoutreturn(lo, &stateid, &cred, iomode, false);
 	} else {
 		spin_unlock(&inode->i_lock);
 		nfs_commit_inode(inode, 0);
 	}
 }
+
+void pnfs_error_mark_layout_for_return(struct inode *inode,
+				       struct pnfs_layout_segment *lseg)
+{
+	struct pnfs_layout_range range = {
+		.iomode = lseg->pls_range.iomode,
+		.offset = 0,
+		.length = NFS4_MAX_UINT64,
+	};
+
+	pnfs_mark_layout_for_return(inode, &range);
+}
 EXPORT_SYMBOL_GPL(pnfs_error_mark_layout_for_return);
 
+static bool
+pnfs_layout_can_be_returned(struct pnfs_layout_hdr *lo)
+{
+	return pnfs_layout_is_valid(lo) &&
+		!test_bit(NFS_LAYOUT_INODE_FREEING, &lo->plh_flags) &&
+		!test_bit(NFS_LAYOUT_RETURN, &lo->plh_flags);
+}
+
+static struct pnfs_layout_segment *
+pnfs_find_first_lseg(struct pnfs_layout_hdr *lo,
+		     const struct pnfs_layout_range *range,
+		     enum pnfs_iomode iomode)
+{
+	struct pnfs_layout_segment *lseg;
+
+	list_for_each_entry(lseg, &lo->plh_segs, pls_list) {
+		if (!test_bit(NFS_LSEG_VALID, &lseg->pls_flags))
+			continue;
+		if (test_bit(NFS_LSEG_LAYOUTRETURN, &lseg->pls_flags))
+			continue;
+		if (lseg->pls_range.iomode != iomode && iomode != IOMODE_ANY)
+			continue;
+		if (pnfs_lseg_range_intersecting(&lseg->pls_range, range))
+			return lseg;
+	}
+	return NULL;
+}
+
+/* Find open file states whose mode matches that of the range */
+static bool
+pnfs_should_return_unused_layout(struct pnfs_layout_hdr *lo,
+				 const struct pnfs_layout_range *range)
+{
+	struct list_head *head;
+	struct nfs_open_context *ctx;
+	fmode_t mode = 0;
+
+	if (!pnfs_layout_can_be_returned(lo) ||
+	    !pnfs_find_first_lseg(lo, range, range->iomode))
+		return false;
+
+	head = &NFS_I(lo->plh_inode)->open_files;
+	list_for_each_entry_rcu(ctx, head, list) {
+		if (ctx->state)
+			mode |= ctx->state->state & (FMODE_READ|FMODE_WRITE);
+	}
+
+	switch (range->iomode) {
+	default:
+		break;
+	case IOMODE_READ:
+		mode &= ~FMODE_WRITE;
+		break;
+	case IOMODE_RW:
+		if (pnfs_find_first_lseg(lo, range, IOMODE_READ))
+			mode &= ~FMODE_READ;
+	}
+	return mode == 0;
+}
+
+static int
+pnfs_layout_return_unused_byserver(struct nfs_server *server, void *data)
+{
+	const struct pnfs_layout_range *range = data;
+	struct pnfs_layout_hdr *lo;
+	struct inode *inode;
+restart:
+	rcu_read_lock();
+	list_for_each_entry_rcu(lo, &server->layouts, plh_layouts) {
+		if (!pnfs_layout_can_be_returned(lo) ||
+		    test_bit(NFS_LAYOUT_RETURN_REQUESTED, &lo->plh_flags))
+			continue;
+		inode = lo->plh_inode;
+		spin_lock(&inode->i_lock);
+		if (!pnfs_should_return_unused_layout(lo, range)) {
+			spin_unlock(&inode->i_lock);
+			continue;
+		}
+		spin_unlock(&inode->i_lock);
+		inode = pnfs_grab_inode_layout_hdr(lo);
+		if (!inode)
+			continue;
+		rcu_read_unlock();
+		pnfs_mark_layout_for_return(inode, range);
+		iput(inode);
+		cond_resched();
+		goto restart;
+	}
+	rcu_read_unlock();
+	return 0;
+}
+
+void
+pnfs_layout_return_unused_byclid(struct nfs_client *clp,
+				 enum pnfs_iomode iomode)
+{
+	struct pnfs_layout_range range = {
+		.iomode = iomode,
+		.offset = 0,
+		.length = NFS4_MAX_UINT64,
+	};
+
+	nfs_client_for_each_server(clp, pnfs_layout_return_unused_byserver,
+			&range);
+}
+
 void
 pnfs_generic_pg_check_layout(struct nfs_pageio_descriptor *pgio)
 {
@@ -2475,7 +2626,7 @@ EXPORT_SYMBOL_GPL(pnfs_generic_pg_check_layout);
  * Check for any intersection between the request and the pgio->pg_lseg,
  * and if none, put this pgio->pg_lseg away.
  */
-static void
+void
 pnfs_generic_pg_check_range(struct nfs_pageio_descriptor *pgio, struct nfs_page *req)
 {
 	if (pgio->pg_lseg && !pnfs_lseg_request_intersecting(pgio->pg_lseg, req)) {
@@ -2483,6 +2634,7 @@ pnfs_generic_pg_check_range(struct nfs_pageio_descriptor *pgio, struct nfs_page
 		pgio->pg_lseg = NULL;
 	}
 }
+EXPORT_SYMBOL_GPL(pnfs_generic_pg_check_range);
 
 void
 pnfs_generic_pg_init_read(struct nfs_pageio_descriptor *pgio, struct nfs_page *req)
@@ -3000,10 +3152,10 @@ pnfs_layoutcommit_inode(struct inode *inode, bool sync)
 	end_pos = nfsi->layout->plh_lwb;
 
 	nfs4_stateid_copy(&data->args.stateid, &nfsi->layout->plh_stateid);
+	data->cred = get_cred(nfsi->layout->plh_lc_cred);
 	spin_unlock(&inode->i_lock);
 
 	data->args.inode = inode;
-	data->cred = get_cred(nfsi->layout->plh_lc_cred);
 	nfs_fattr_init(&data->fattr);
 	data->args.bitmask = NFS_SERVER(inode)->cache_consistency_bitmask;
 	data->res.fattr = &data->fattr;
diff --git a/fs/nfs/pnfs.h b/fs/nfs/pnfs.h
index 0fafdad..8e0ada5 100644
--- a/fs/nfs/pnfs.h
+++ b/fs/nfs/pnfs.h
@@ -66,6 +66,7 @@ struct nfs4_pnfs_ds {
 struct pnfs_layout_segment {
 	struct list_head pls_list;
 	struct list_head pls_lc_list;
+	struct list_head pls_commits;
 	struct pnfs_layout_range pls_range;
 	refcount_t pls_refcount;
 	u32 pls_seq;
@@ -105,6 +106,7 @@ enum {
 	NFS_LAYOUT_INVALID_STID,	/* layout stateid id is invalid */
 	NFS_LAYOUT_FIRST_LAYOUTGET,	/* Serialize first layoutget */
 	NFS_LAYOUT_INODE_FREEING,	/* The inode is being freed */
+	NFS_LAYOUT_HASHED,		/* The layout visible */
 };
 
 enum layoutdriver_policy_flags {
@@ -148,22 +150,6 @@ struct pnfs_layoutdriver_type {
 	const struct nfs_pageio_ops *pg_write_ops;
 
 	struct pnfs_ds_commit_info *(*get_ds_info) (struct inode *inode);
-	void (*mark_request_commit) (struct nfs_page *req,
-				     struct pnfs_layout_segment *lseg,
-				     struct nfs_commit_info *cinfo,
-				     u32 ds_commit_idx);
-	void (*clear_request_commit) (struct nfs_page *req,
-				      struct nfs_commit_info *cinfo);
-	int (*scan_commit_lists) (struct nfs_commit_info *cinfo,
-				  int max);
-	void (*recover_commit_reqs) (struct list_head *list,
-				     struct nfs_commit_info *cinfo);
-	struct nfs_page * (*search_commit_reqs)(struct nfs_commit_info *cinfo,
-						struct page *page);
-	int (*commit_pagelist)(struct inode *inode,
-			       struct list_head *mds_pages,
-			       int how,
-			       struct nfs_commit_info *cinfo);
 
 	int (*sync)(struct inode *inode, bool datasync);
 
@@ -186,6 +172,29 @@ struct pnfs_layoutdriver_type {
 	int (*prepare_layoutstats) (struct nfs42_layoutstat_args *args);
 };
 
+struct pnfs_commit_ops {
+	void (*setup_ds_info)(struct pnfs_ds_commit_info *,
+			      struct pnfs_layout_segment *);
+	void (*release_ds_info)(struct pnfs_ds_commit_info *,
+				struct inode *inode);
+	int (*commit_pagelist)(struct inode *inode,
+			       struct list_head *mds_pages,
+			       int how,
+			       struct nfs_commit_info *cinfo);
+	void (*mark_request_commit) (struct nfs_page *req,
+				     struct pnfs_layout_segment *lseg,
+				     struct nfs_commit_info *cinfo,
+				     u32 ds_commit_idx);
+	void (*clear_request_commit) (struct nfs_page *req,
+				      struct nfs_commit_info *cinfo);
+	int (*scan_commit_lists) (struct nfs_commit_info *cinfo,
+				  int max);
+	void (*recover_commit_reqs) (struct list_head *list,
+				     struct nfs_commit_info *cinfo);
+	struct nfs_page * (*search_commit_reqs)(struct nfs_commit_info *cinfo,
+						struct page *page);
+};
+
 struct pnfs_layout_hdr {
 	refcount_t		plh_refcount;
 	atomic_t		plh_outstanding; /* number of RPCs out */
@@ -203,6 +212,7 @@ struct pnfs_layout_hdr {
 	loff_t			plh_lwb; /* last write byte for layoutcommit */
 	const struct cred	*plh_lc_cred; /* layoutcommit cred */
 	struct inode		*plh_inode;
+	struct rcu_head		plh_rcu;
 };
 
 struct pnfs_device {
@@ -242,6 +252,7 @@ void pnfs_put_lseg(struct pnfs_layout_segment *lseg);
 void set_pnfs_layoutdriver(struct nfs_server *, const struct nfs_fh *, struct nfs_fsinfo *);
 void unset_pnfs_layoutdriver(struct nfs_server *);
 void pnfs_generic_pg_check_layout(struct nfs_pageio_descriptor *pgio);
+void pnfs_generic_pg_check_range(struct nfs_pageio_descriptor *pgio, struct nfs_page *req);
 void pnfs_generic_pg_init_read(struct nfs_pageio_descriptor *, struct nfs_page *);
 int pnfs_generic_pg_readpages(struct nfs_pageio_descriptor *desc);
 void pnfs_generic_pg_init_write(struct nfs_pageio_descriptor *pgio,
@@ -267,6 +278,7 @@ bool nfs4_layout_refresh_old_stateid(nfs4_stateid *dst,
 void pnfs_put_layout_hdr(struct pnfs_layout_hdr *lo);
 void pnfs_set_layout_stateid(struct pnfs_layout_hdr *lo,
 			     const nfs4_stateid *new,
+			     const struct cred *cred,
 			     bool update_barrier);
 int pnfs_mark_matching_lsegs_invalid(struct pnfs_layout_hdr *lo,
 				struct list_head *tmp_list,
@@ -326,6 +338,9 @@ int pnfs_write_done_resend_to_mds(struct nfs_pgio_header *);
 struct nfs4_threshold *pnfs_mdsthreshold_alloc(void);
 void pnfs_error_mark_layout_for_return(struct inode *inode,
 				       struct pnfs_layout_segment *lseg);
+void pnfs_layout_return_unused_byclid(struct nfs_client *clp,
+				      enum pnfs_iomode iomode);
+
 /* nfs4_deviceid_flags */
 enum {
 	NFS_DEVICEID_INVALID = 0,       /* set when MDS clientid recalled */
@@ -360,6 +375,16 @@ bool nfs4_test_deviceid_unavailable(struct nfs4_deviceid_node *node);
 void nfs4_deviceid_purge_client(const struct nfs_client *);
 
 /* pnfs_nfs.c */
+struct pnfs_commit_array *pnfs_alloc_commit_array(size_t n, gfp_t gfp_flags);
+void pnfs_free_commit_array(struct pnfs_commit_array *p);
+struct pnfs_commit_array *pnfs_add_commit_array(struct pnfs_ds_commit_info *,
+						struct pnfs_commit_array *,
+						struct pnfs_layout_segment *);
+
+void pnfs_generic_ds_cinfo_release_lseg(struct pnfs_ds_commit_info *fl_cinfo,
+		struct pnfs_layout_segment *lseg);
+void pnfs_generic_ds_cinfo_destroy(struct pnfs_ds_commit_info *fl_cinfo);
+
 void pnfs_generic_clear_request_commit(struct nfs_page *req,
 				       struct nfs_commit_info *cinfo);
 void pnfs_generic_commit_release(void *calldata);
@@ -367,6 +392,8 @@ void pnfs_generic_prepare_to_resend_writes(struct nfs_commit_data *data);
 void pnfs_generic_rw_release(void *data);
 void pnfs_generic_recover_commit_reqs(struct list_head *dst,
 				      struct nfs_commit_info *cinfo);
+struct nfs_page *pnfs_generic_search_commit_reqs(struct nfs_commit_info *cinfo,
+						 struct page *page);
 int pnfs_generic_commit_pagelist(struct inode *inode,
 				 struct list_head *mds_pages,
 				 int how,
@@ -438,9 +465,11 @@ static inline int
 pnfs_commit_list(struct inode *inode, struct list_head *mds_pages, int how,
 		 struct nfs_commit_info *cinfo)
 {
-	if (cinfo->ds == NULL || cinfo->ds->ncommitting == 0)
+	struct pnfs_ds_commit_info *fl_cinfo = cinfo->ds;
+
+	if (fl_cinfo == NULL || fl_cinfo->ncommitting == 0)
 		return PNFS_NOT_ATTEMPTED;
-	return NFS_SERVER(inode)->pnfs_curr_ld->commit_pagelist(inode, mds_pages, how, cinfo);
+	return fl_cinfo->ops->commit_pagelist(inode, mds_pages, how, cinfo);
 }
 
 static inline struct pnfs_ds_commit_info *
@@ -454,6 +483,28 @@ pnfs_get_ds_info(struct inode *inode)
 }
 
 static inline void
+pnfs_init_ds_commit_info_ops(struct pnfs_ds_commit_info *fl_cinfo, struct inode *inode)
+{
+	struct pnfs_ds_commit_info *inode_cinfo = pnfs_get_ds_info(inode);
+	if (inode_cinfo != NULL)
+		fl_cinfo->ops = inode_cinfo->ops;
+}
+
+static inline void
+pnfs_init_ds_commit_info(struct pnfs_ds_commit_info *fl_cinfo)
+{
+	INIT_LIST_HEAD(&fl_cinfo->commits);
+	fl_cinfo->ops = NULL;
+}
+
+static inline void
+pnfs_release_ds_info(struct pnfs_ds_commit_info *fl_cinfo, struct inode *inode)
+{
+	if (fl_cinfo->ops != NULL && fl_cinfo->ops->release_ds_info != NULL)
+		fl_cinfo->ops->release_ds_info(fl_cinfo, inode);
+}
+
+static inline void
 pnfs_generic_mark_devid_invalid(struct nfs4_deviceid_node *node)
 {
 	set_bit(NFS_DEVICEID_INVALID, &node->flags);
@@ -463,24 +514,22 @@ static inline bool
 pnfs_mark_request_commit(struct nfs_page *req, struct pnfs_layout_segment *lseg,
 			 struct nfs_commit_info *cinfo, u32 ds_commit_idx)
 {
-	struct inode *inode = d_inode(nfs_req_openctx(req)->dentry);
-	struct pnfs_layoutdriver_type *ld = NFS_SERVER(inode)->pnfs_curr_ld;
+	struct pnfs_ds_commit_info *fl_cinfo = cinfo->ds;
 
-	if (lseg == NULL || ld->mark_request_commit == NULL)
+	if (!lseg || !fl_cinfo->ops->mark_request_commit)
 		return false;
-	ld->mark_request_commit(req, lseg, cinfo, ds_commit_idx);
+	fl_cinfo->ops->mark_request_commit(req, lseg, cinfo, ds_commit_idx);
 	return true;
 }
 
 static inline bool
 pnfs_clear_request_commit(struct nfs_page *req, struct nfs_commit_info *cinfo)
 {
-	struct inode *inode = d_inode(nfs_req_openctx(req)->dentry);
-	struct pnfs_layoutdriver_type *ld = NFS_SERVER(inode)->pnfs_curr_ld;
+	struct pnfs_ds_commit_info *fl_cinfo = cinfo->ds;
 
-	if (ld == NULL || ld->clear_request_commit == NULL)
+	if (!fl_cinfo || !fl_cinfo->ops || !fl_cinfo->ops->clear_request_commit)
 		return false;
-	ld->clear_request_commit(req, cinfo);
+	fl_cinfo->ops->clear_request_commit(req, cinfo);
 	return true;
 }
 
@@ -488,21 +537,31 @@ static inline int
 pnfs_scan_commit_lists(struct inode *inode, struct nfs_commit_info *cinfo,
 		       int max)
 {
-	if (cinfo->ds == NULL || cinfo->ds->nwritten == 0)
+	struct pnfs_ds_commit_info *fl_cinfo = cinfo->ds;
+
+	if (!fl_cinfo || fl_cinfo->nwritten == 0)
 		return 0;
-	else
-		return NFS_SERVER(inode)->pnfs_curr_ld->scan_commit_lists(cinfo, max);
+	return fl_cinfo->ops->scan_commit_lists(cinfo, max);
+}
+
+static inline void
+pnfs_recover_commit_reqs(struct list_head *head, struct nfs_commit_info *cinfo)
+{
+	struct pnfs_ds_commit_info *fl_cinfo = cinfo->ds;
+
+	if (fl_cinfo && fl_cinfo->nwritten != 0)
+		fl_cinfo->ops->recover_commit_reqs(head, cinfo);
 }
 
 static inline struct nfs_page *
 pnfs_search_commit_reqs(struct inode *inode, struct nfs_commit_info *cinfo,
 			struct page *page)
 {
-	struct pnfs_layoutdriver_type *ld = NFS_SERVER(inode)->pnfs_curr_ld;
+	struct pnfs_ds_commit_info *fl_cinfo = cinfo->ds;
 
-	if (ld == NULL || ld->search_commit_reqs == NULL)
+	if (!fl_cinfo->ops || !fl_cinfo->ops->search_commit_reqs)
 		return NULL;
-	return ld->search_commit_reqs(cinfo, page);
+	return fl_cinfo->ops->search_commit_reqs(cinfo, page);
 }
 
 /* Should the pNFS client commit and return the layout upon a setattr */
@@ -750,6 +809,21 @@ pnfs_get_ds_info(struct inode *inode)
 	return NULL;
 }
 
+static inline void
+pnfs_init_ds_commit_info_ops(struct pnfs_ds_commit_info *fl_cinfo, struct inode *inode)
+{
+}
+
+static inline void
+pnfs_init_ds_commit_info(struct pnfs_ds_commit_info *fl_cinfo)
+{
+}
+
+static inline void
+pnfs_release_ds_info(struct pnfs_ds_commit_info *fl_cinfo, struct inode *inode)
+{
+}
+
 static inline bool
 pnfs_mark_request_commit(struct nfs_page *req, struct pnfs_layout_segment *lseg,
 			 struct nfs_commit_info *cinfo, u32 ds_commit_idx)
@@ -770,6 +844,11 @@ pnfs_scan_commit_lists(struct inode *inode, struct nfs_commit_info *cinfo,
 	return 0;
 }
 
+static inline void
+pnfs_recover_commit_reqs(struct list_head *head, struct nfs_commit_info *cinfo)
+{
+}
+
 static inline struct nfs_page *
 pnfs_search_commit_reqs(struct inode *inode, struct nfs_commit_info *cinfo,
 			struct page *page)
diff --git a/fs/nfs/pnfs_nfs.c b/fs/nfs/pnfs_nfs.c
index 8b37e7f..e7ddbce 100644
--- a/fs/nfs/pnfs_nfs.c
+++ b/fs/nfs/pnfs_nfs.c
@@ -59,6 +59,17 @@ void pnfs_generic_commit_release(void *calldata)
 }
 EXPORT_SYMBOL_GPL(pnfs_generic_commit_release);
 
+static struct pnfs_layout_segment *
+pnfs_free_bucket_lseg(struct pnfs_commit_bucket *bucket)
+{
+	if (list_empty(&bucket->committing) && list_empty(&bucket->written)) {
+		struct pnfs_layout_segment *freeme = bucket->lseg;
+		bucket->lseg = NULL;
+		return freeme;
+	}
+	return NULL;
+}
+
 /* The generic layer is about to remove the req from the commit list.
  * If this will make the bucket empty, it will need to put the lseg reference.
  * Note this must be called holding nfsi->commit_mutex
@@ -78,8 +89,7 @@ pnfs_generic_clear_request_commit(struct nfs_page *req,
 		bucket = list_first_entry(&req->wb_list,
 					  struct pnfs_commit_bucket,
 					  written);
-		freeme = bucket->wlseg;
-		bucket->wlseg = NULL;
+		freeme = pnfs_free_bucket_lseg(bucket);
 	}
 out:
 	nfs_request_remove_commit_list(req, cinfo);
@@ -87,10 +97,154 @@ pnfs_generic_clear_request_commit(struct nfs_page *req,
 }
 EXPORT_SYMBOL_GPL(pnfs_generic_clear_request_commit);
 
+struct pnfs_commit_array *
+pnfs_alloc_commit_array(size_t n, gfp_t gfp_flags)
+{
+	struct pnfs_commit_array *p;
+	struct pnfs_commit_bucket *b;
+
+	p = kmalloc(struct_size(p, buckets, n), gfp_flags);
+	if (!p)
+		return NULL;
+	p->nbuckets = n;
+	INIT_LIST_HEAD(&p->cinfo_list);
+	INIT_LIST_HEAD(&p->lseg_list);
+	p->lseg = NULL;
+	for (b = &p->buckets[0]; n != 0; b++, n--) {
+		INIT_LIST_HEAD(&b->written);
+		INIT_LIST_HEAD(&b->committing);
+		b->lseg = NULL;
+		b->direct_verf.committed = NFS_INVALID_STABLE_HOW;
+	}
+	return p;
+}
+EXPORT_SYMBOL_GPL(pnfs_alloc_commit_array);
+
+void
+pnfs_free_commit_array(struct pnfs_commit_array *p)
+{
+	kfree_rcu(p, rcu);
+}
+EXPORT_SYMBOL_GPL(pnfs_free_commit_array);
+
+static struct pnfs_commit_array *
+pnfs_find_commit_array_by_lseg(struct pnfs_ds_commit_info *fl_cinfo,
+		struct pnfs_layout_segment *lseg)
+{
+	struct pnfs_commit_array *array;
+
+	list_for_each_entry_rcu(array, &fl_cinfo->commits, cinfo_list) {
+		if (array->lseg == lseg)
+			return array;
+	}
+	return NULL;
+}
+
+struct pnfs_commit_array *
+pnfs_add_commit_array(struct pnfs_ds_commit_info *fl_cinfo,
+		struct pnfs_commit_array *new,
+		struct pnfs_layout_segment *lseg)
+{
+	struct pnfs_commit_array *array;
+
+	array = pnfs_find_commit_array_by_lseg(fl_cinfo, lseg);
+	if (array)
+		return array;
+	new->lseg = lseg;
+	refcount_set(&new->refcount, 1);
+	list_add_rcu(&new->cinfo_list, &fl_cinfo->commits);
+	list_add(&new->lseg_list, &lseg->pls_commits);
+	return new;
+}
+EXPORT_SYMBOL_GPL(pnfs_add_commit_array);
+
+static struct pnfs_commit_array *
+pnfs_lookup_commit_array(struct pnfs_ds_commit_info *fl_cinfo,
+		struct pnfs_layout_segment *lseg)
+{
+	struct pnfs_commit_array *array;
+
+	rcu_read_lock();
+	array = pnfs_find_commit_array_by_lseg(fl_cinfo, lseg);
+	if (!array) {
+		rcu_read_unlock();
+		fl_cinfo->ops->setup_ds_info(fl_cinfo, lseg);
+		rcu_read_lock();
+		array = pnfs_find_commit_array_by_lseg(fl_cinfo, lseg);
+	}
+	rcu_read_unlock();
+	return array;
+}
+
+static void
+pnfs_release_commit_array_locked(struct pnfs_commit_array *array)
+{
+	list_del_rcu(&array->cinfo_list);
+	list_del(&array->lseg_list);
+	pnfs_free_commit_array(array);
+}
+
+static void
+pnfs_put_commit_array_locked(struct pnfs_commit_array *array)
+{
+	if (refcount_dec_and_test(&array->refcount))
+		pnfs_release_commit_array_locked(array);
+}
+
+static void
+pnfs_put_commit_array(struct pnfs_commit_array *array, struct inode *inode)
+{
+	if (refcount_dec_and_lock(&array->refcount, &inode->i_lock)) {
+		pnfs_release_commit_array_locked(array);
+		spin_unlock(&inode->i_lock);
+	}
+}
+
+static struct pnfs_commit_array *
+pnfs_get_commit_array(struct pnfs_commit_array *array)
+{
+	if (refcount_inc_not_zero(&array->refcount))
+		return array;
+	return NULL;
+}
+
+static void
+pnfs_remove_and_free_commit_array(struct pnfs_commit_array *array)
+{
+	array->lseg = NULL;
+	list_del_init(&array->lseg_list);
+	pnfs_put_commit_array_locked(array);
+}
+
+void
+pnfs_generic_ds_cinfo_release_lseg(struct pnfs_ds_commit_info *fl_cinfo,
+		struct pnfs_layout_segment *lseg)
+{
+	struct pnfs_commit_array *array, *tmp;
+
+	list_for_each_entry_safe(array, tmp, &lseg->pls_commits, lseg_list)
+		pnfs_remove_and_free_commit_array(array);
+}
+EXPORT_SYMBOL_GPL(pnfs_generic_ds_cinfo_release_lseg);
+
+void
+pnfs_generic_ds_cinfo_destroy(struct pnfs_ds_commit_info *fl_cinfo)
+{
+	struct pnfs_commit_array *array, *tmp;
+
+	list_for_each_entry_safe(array, tmp, &fl_cinfo->commits, cinfo_list)
+		pnfs_remove_and_free_commit_array(array);
+}
+EXPORT_SYMBOL_GPL(pnfs_generic_ds_cinfo_destroy);
+
+/*
+ * Locks the nfs_page requests for commit and moves them to
+ * @bucket->committing.
+ */
 static int
-pnfs_generic_scan_ds_commit_list(struct pnfs_commit_bucket *bucket,
-				 struct nfs_commit_info *cinfo,
-				 int max)
+pnfs_bucket_scan_ds_commit_list(struct pnfs_commit_bucket *bucket,
+				struct nfs_commit_info *cinfo,
+				int max)
 {
 	struct list_head *src = &bucket->written;
 	struct list_head *dst = &bucket->committing;
@@ -101,158 +255,254 @@ pnfs_generic_scan_ds_commit_list(struct pnfs_commit_bucket *bucket,
 	if (ret) {
 		cinfo->ds->nwritten -= ret;
 		cinfo->ds->ncommitting += ret;
-		if (bucket->clseg == NULL)
-			bucket->clseg = pnfs_get_lseg(bucket->wlseg);
-		if (list_empty(src)) {
-			pnfs_put_lseg(bucket->wlseg);
-			bucket->wlseg = NULL;
-		}
 	}
 	return ret;
 }
 
+static int pnfs_bucket_scan_array(struct nfs_commit_info *cinfo,
+				  struct pnfs_commit_bucket *buckets,
+				  unsigned int nbuckets,
+				  int max)
+{
+	unsigned int i;
+	int rv = 0, cnt;
+
+	for (i = 0; i < nbuckets && max != 0; i++) {
+		cnt = pnfs_bucket_scan_ds_commit_list(&buckets[i], cinfo, max);
+		rv += cnt;
+		max -= cnt;
+	}
+	return rv;
+}
+
 /* Move reqs from written to committing lists, returning count
  * of number moved.
  */
-int pnfs_generic_scan_commit_lists(struct nfs_commit_info *cinfo,
-				   int max)
+int pnfs_generic_scan_commit_lists(struct nfs_commit_info *cinfo, int max)
 {
-	int i, rv = 0, cnt;
+	struct pnfs_ds_commit_info *fl_cinfo = cinfo->ds;
+	struct pnfs_commit_array *array;
+	int rv = 0, cnt;
 
-	lockdep_assert_held(&NFS_I(cinfo->inode)->commit_mutex);
-	for (i = 0; i < cinfo->ds->nbuckets && max != 0; i++) {
-		cnt = pnfs_generic_scan_ds_commit_list(&cinfo->ds->buckets[i],
-						       cinfo, max);
-		max -= cnt;
+	rcu_read_lock();
+	list_for_each_entry_rcu(array, &fl_cinfo->commits, cinfo_list) {
+		if (!array->lseg || !pnfs_get_commit_array(array))
+			continue;
+		rcu_read_unlock();
+		cnt = pnfs_bucket_scan_array(cinfo, array->buckets,
+				array->nbuckets, max);
+		rcu_read_lock();
+		pnfs_put_commit_array(array, cinfo->inode);
 		rv += cnt;
+		max -= cnt;
+		if (!max)
+			break;
 	}
+	rcu_read_unlock();
 	return rv;
 }
 EXPORT_SYMBOL_GPL(pnfs_generic_scan_commit_lists);
 
+static unsigned int
+pnfs_bucket_recover_commit_reqs(struct list_head *dst,
+			        struct pnfs_commit_bucket *buckets,
+				unsigned int nbuckets,
+				struct nfs_commit_info *cinfo)
+{
+	struct pnfs_commit_bucket *b;
+	struct pnfs_layout_segment *freeme;
+	unsigned int nwritten, ret = 0;
+	unsigned int i;
+
+restart:
+	for (i = 0, b = buckets; i < nbuckets; i++, b++) {
+		nwritten = nfs_scan_commit_list(&b->written, dst, cinfo, 0);
+		if (!nwritten)
+			continue;
+		ret += nwritten;
+		freeme = pnfs_free_bucket_lseg(b);
+		if (freeme) {
+			pnfs_put_lseg(freeme);
+			goto restart;
+		}
+	}
+	return ret;
+}
+
 /* Pull everything off the committing lists and dump into @dst.  */
 void pnfs_generic_recover_commit_reqs(struct list_head *dst,
 				      struct nfs_commit_info *cinfo)
 {
-	struct pnfs_commit_bucket *b;
-	struct pnfs_layout_segment *freeme;
-	int nwritten;
-	int i;
+	struct pnfs_ds_commit_info *fl_cinfo = cinfo->ds;
+	struct pnfs_commit_array *array;
+	unsigned int nwritten;
 
 	lockdep_assert_held(&NFS_I(cinfo->inode)->commit_mutex);
-restart:
-	for (i = 0, b = cinfo->ds->buckets; i < cinfo->ds->nbuckets; i++, b++) {
-		nwritten = nfs_scan_commit_list(&b->written, dst, cinfo, 0);
-		if (!nwritten)
+	rcu_read_lock();
+	list_for_each_entry_rcu(array, &fl_cinfo->commits, cinfo_list) {
+		if (!array->lseg || !pnfs_get_commit_array(array))
 			continue;
-		cinfo->ds->nwritten -= nwritten;
-		if (list_empty(&b->written)) {
-			freeme = b->wlseg;
-			b->wlseg = NULL;
-			pnfs_put_lseg(freeme);
-			goto restart;
-		}
+		rcu_read_unlock();
+		nwritten = pnfs_bucket_recover_commit_reqs(dst,
+							   array->buckets,
+							   array->nbuckets,
+							   cinfo);
+		rcu_read_lock();
+		pnfs_put_commit_array(array, cinfo->inode);
+		fl_cinfo->nwritten -= nwritten;
 	}
+	rcu_read_unlock();
 }
 EXPORT_SYMBOL_GPL(pnfs_generic_recover_commit_reqs);
 
-static void pnfs_generic_retry_commit(struct nfs_commit_info *cinfo, int idx)
+static struct nfs_page *
+pnfs_bucket_search_commit_reqs(struct pnfs_commit_bucket *buckets,
+		unsigned int nbuckets, struct page *page)
+{
+	struct nfs_page *req;
+	struct pnfs_commit_bucket *b;
+	unsigned int i;
+
+	/* Linearly search the commit lists for each bucket until a matching
+	 * request is found */
+	for (i = 0, b = buckets; i < nbuckets; i++, b++) {
+		list_for_each_entry(req, &b->written, wb_list) {
+			if (req->wb_page == page)
+				return req->wb_head;
+		}
+		list_for_each_entry(req, &b->committing, wb_list) {
+			if (req->wb_page == page)
+				return req->wb_head;
+		}
+	}
+	return NULL;
+}
+
+/* pnfs_generic_search_commit_reqs - Search lists in @cinfo for the head reqest
+ *				   for @page
+ * @cinfo - commit info for current inode
+ * @page - page to search for matching head request
+ *
+ * Returns a the head request if one is found, otherwise returns NULL.
+ */
+struct nfs_page *
+pnfs_generic_search_commit_reqs(struct nfs_commit_info *cinfo, struct page *page)
 {
 	struct pnfs_ds_commit_info *fl_cinfo = cinfo->ds;
+	struct pnfs_commit_array *array;
+	struct nfs_page *req;
+
+	list_for_each_entry(array, &fl_cinfo->commits, cinfo_list) {
+		req = pnfs_bucket_search_commit_reqs(array->buckets,
+				array->nbuckets, page);
+		if (req)
+			return req;
+	}
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(pnfs_generic_search_commit_reqs);
+
+static struct pnfs_layout_segment *
+pnfs_bucket_get_committing(struct list_head *head,
+			   struct pnfs_commit_bucket *bucket,
+			   struct nfs_commit_info *cinfo)
+{
+	struct list_head *pos;
+
+	list_for_each(pos, &bucket->committing)
+		cinfo->ds->ncommitting--;
+	list_splice_init(&bucket->committing, head);
+	return pnfs_free_bucket_lseg(bucket);
+}
+
+static struct nfs_commit_data *
+pnfs_bucket_fetch_commitdata(struct pnfs_commit_bucket *bucket,
+			     struct nfs_commit_info *cinfo)
+{
+	struct nfs_commit_data *data = nfs_commitdata_alloc(false);
+
+	if (!data)
+		return NULL;
+	data->lseg = pnfs_bucket_get_committing(&data->pages, bucket, cinfo);
+	if (!data->lseg)
+		data->lseg = pnfs_get_lseg(bucket->lseg);
+	return data;
+}
+
+static void pnfs_generic_retry_commit(struct pnfs_commit_bucket *buckets,
+				      unsigned int nbuckets,
+				      struct nfs_commit_info *cinfo,
+				      unsigned int idx)
+{
 	struct pnfs_commit_bucket *bucket;
 	struct pnfs_layout_segment *freeme;
-	struct list_head *pos;
 	LIST_HEAD(pages);
-	int i;
 
-	mutex_lock(&NFS_I(cinfo->inode)->commit_mutex);
-	for (i = idx; i < fl_cinfo->nbuckets; i++) {
-		bucket = &fl_cinfo->buckets[i];
+	for (bucket = buckets; idx < nbuckets; bucket++, idx++) {
 		if (list_empty(&bucket->committing))
 			continue;
-		freeme = bucket->clseg;
-		bucket->clseg = NULL;
-		list_for_each(pos, &bucket->committing)
-			cinfo->ds->ncommitting--;
-		list_splice_init(&bucket->committing, &pages);
-		mutex_unlock(&NFS_I(cinfo->inode)->commit_mutex);
-		nfs_retry_commit(&pages, freeme, cinfo, i);
-		pnfs_put_lseg(freeme);
 		mutex_lock(&NFS_I(cinfo->inode)->commit_mutex);
+		freeme = pnfs_bucket_get_committing(&pages, bucket, cinfo);
+		mutex_unlock(&NFS_I(cinfo->inode)->commit_mutex);
+		nfs_retry_commit(&pages, freeme, cinfo, idx);
+		pnfs_put_lseg(freeme);
 	}
-	mutex_unlock(&NFS_I(cinfo->inode)->commit_mutex);
 }
 
 static unsigned int
-pnfs_generic_alloc_ds_commits(struct nfs_commit_info *cinfo,
-			      struct list_head *list)
+pnfs_bucket_alloc_ds_commits(struct list_head *list,
+			     struct pnfs_commit_bucket *buckets,
+			     unsigned int nbuckets,
+			     struct nfs_commit_info *cinfo)
 {
-	struct pnfs_ds_commit_info *fl_cinfo;
 	struct pnfs_commit_bucket *bucket;
 	struct nfs_commit_data *data;
-	int i;
+	unsigned int i;
 	unsigned int nreq = 0;
 
-	fl_cinfo = cinfo->ds;
-	bucket = fl_cinfo->buckets;
-	for (i = 0; i < fl_cinfo->nbuckets; i++, bucket++) {
+	for (i = 0, bucket = buckets; i < nbuckets; i++, bucket++) {
 		if (list_empty(&bucket->committing))
 			continue;
-		data = nfs_commitdata_alloc(false);
-		if (!data)
-			break;
-		data->ds_commit_index = i;
-		list_add(&data->pages, list);
-		nreq++;
+		mutex_lock(&NFS_I(cinfo->inode)->commit_mutex);
+		if (!list_empty(&bucket->committing)) {
+			data = pnfs_bucket_fetch_commitdata(bucket, cinfo);
+			if (!data)
+				goto out_error;
+			data->ds_commit_index = i;
+			list_add_tail(&data->list, list);
+			atomic_inc(&cinfo->mds->rpcs_out);
+			nreq++;
+		}
+		mutex_unlock(&NFS_I(cinfo->inode)->commit_mutex);
 	}
-
+	return nreq;
+out_error:
+	mutex_unlock(&NFS_I(cinfo->inode)->commit_mutex);
 	/* Clean up on error */
-	pnfs_generic_retry_commit(cinfo, i);
+	pnfs_generic_retry_commit(buckets, nbuckets, cinfo, i);
 	return nreq;
 }
 
-static inline
-void pnfs_fetch_commit_bucket_list(struct list_head *pages,
-		struct nfs_commit_data *data,
-		struct nfs_commit_info *cinfo)
+static unsigned int
+pnfs_alloc_ds_commits_list(struct list_head *list,
+			   struct pnfs_ds_commit_info *fl_cinfo,
+			   struct nfs_commit_info *cinfo)
 {
-	struct pnfs_commit_bucket *bucket;
-	struct list_head *pos;
+	struct pnfs_commit_array *array;
+	unsigned int ret = 0;
 
-	bucket = &cinfo->ds->buckets[data->ds_commit_index];
-	mutex_lock(&NFS_I(cinfo->inode)->commit_mutex);
-	list_for_each(pos, &bucket->committing)
-		cinfo->ds->ncommitting--;
-	list_splice_init(&bucket->committing, pages);
-	data->lseg = bucket->clseg;
-	bucket->clseg = NULL;
-	mutex_unlock(&NFS_I(cinfo->inode)->commit_mutex);
-
-}
-
-/* Helper function for pnfs_generic_commit_pagelist to catch an empty
- * page list. This can happen when two commits race.
- *
- * This must be called instead of nfs_init_commit - call one or the other, but
- * not both!
- */
-static bool
-pnfs_generic_commit_cancel_empty_pagelist(struct list_head *pages,
-					  struct nfs_commit_data *data,
-					  struct nfs_commit_info *cinfo)
-{
-	if (list_empty(pages)) {
-		if (atomic_dec_and_test(&cinfo->mds->rpcs_out))
-			wake_up_var(&cinfo->mds->rpcs_out);
-		/* don't call nfs_commitdata_release - it tries to put
-		 * the open_context which is not acquired until nfs_init_commit
-		 * which has not been called on @data */
-		WARN_ON_ONCE(data->context);
-		nfs_commit_free(data);
-		return true;
+	rcu_read_lock();
+	list_for_each_entry_rcu(array, &fl_cinfo->commits, cinfo_list) {
+		if (!array->lseg || !pnfs_get_commit_array(array))
+			continue;
+		rcu_read_unlock();
+		ret += pnfs_bucket_alloc_ds_commits(list, array->buckets,
+				array->nbuckets, cinfo);
+		rcu_read_lock();
+		pnfs_put_commit_array(array, cinfo->inode);
 	}
-
-	return false;
+	rcu_read_unlock();
+	return ret;
 }
 
 /* This follows nfs_commit_list pretty closely */
@@ -262,6 +512,7 @@ pnfs_generic_commit_pagelist(struct inode *inode, struct list_head *mds_pages,
 			     int (*initiate_commit)(struct nfs_commit_data *data,
 						    int how))
 {
+	struct pnfs_ds_commit_info *fl_cinfo = cinfo->ds;
 	struct nfs_commit_data *data, *tmp;
 	LIST_HEAD(list);
 	unsigned int nreq = 0;
@@ -269,40 +520,25 @@ pnfs_generic_commit_pagelist(struct inode *inode, struct list_head *mds_pages,
 	if (!list_empty(mds_pages)) {
 		data = nfs_commitdata_alloc(true);
 		data->ds_commit_index = -1;
-		list_add(&data->pages, &list);
+		list_splice_init(mds_pages, &data->pages);
+		list_add_tail(&data->list, &list);
+		atomic_inc(&cinfo->mds->rpcs_out);
 		nreq++;
 	}
 
-	nreq += pnfs_generic_alloc_ds_commits(cinfo, &list);
-
+	nreq += pnfs_alloc_ds_commits_list(&list, fl_cinfo, cinfo);
 	if (nreq == 0)
 		goto out;
 
-	atomic_add(nreq, &cinfo->mds->rpcs_out);
-
-	list_for_each_entry_safe(data, tmp, &list, pages) {
-		list_del_init(&data->pages);
+	list_for_each_entry_safe(data, tmp, &list, list) {
+		list_del(&data->list);
 		if (data->ds_commit_index < 0) {
-			/* another commit raced with us */
-			if (pnfs_generic_commit_cancel_empty_pagelist(mds_pages,
-				data, cinfo))
-				continue;
-
-			nfs_init_commit(data, mds_pages, NULL, cinfo);
+			nfs_init_commit(data, NULL, NULL, cinfo);
 			nfs_initiate_commit(NFS_CLIENT(inode), data,
 					    NFS_PROTO(data->inode),
 					    data->mds_ops, how, 0);
 		} else {
-			LIST_HEAD(pages);
-
-			pnfs_fetch_commit_bucket_list(&pages, data, cinfo);
-
-			/* another commit raced with us */
-			if (pnfs_generic_commit_cancel_empty_pagelist(&pages,
-				data, cinfo))
-				continue;
-
-			nfs_init_commit(data, &pages, data->lseg, cinfo);
+			nfs_init_commit(data, NULL, data->lseg, cinfo);
 			initiate_commit(data, how);
 		}
 	}
@@ -930,32 +1166,33 @@ pnfs_layout_mark_request_commit(struct nfs_page *req,
 				u32 ds_commit_idx)
 {
 	struct list_head *list;
-	struct pnfs_commit_bucket *buckets;
+	struct pnfs_commit_array *array;
+	struct pnfs_commit_bucket *bucket;
 
 	mutex_lock(&NFS_I(cinfo->inode)->commit_mutex);
-	buckets = cinfo->ds->buckets;
-	list = &buckets[ds_commit_idx].written;
-	if (list_empty(list)) {
-		if (!pnfs_is_valid_lseg(lseg)) {
-			mutex_unlock(&NFS_I(cinfo->inode)->commit_mutex);
-			cinfo->completion_ops->resched_write(cinfo, req);
-			return;
-		}
-		/* Non-empty buckets hold a reference on the lseg.  That ref
-		 * is normally transferred to the COMMIT call and released
-		 * there.  It could also be released if the last req is pulled
-		 * off due to a rewrite, in which case it will be done in
-		 * pnfs_common_clear_request_commit
-		 */
-		WARN_ON_ONCE(buckets[ds_commit_idx].wlseg != NULL);
-		buckets[ds_commit_idx].wlseg = pnfs_get_lseg(lseg);
-	}
+	array = pnfs_lookup_commit_array(cinfo->ds, lseg);
+	if (!array || !pnfs_is_valid_lseg(lseg))
+		goto out_resched;
+	bucket = &array->buckets[ds_commit_idx];
+	list = &bucket->written;
+	/* Non-empty buckets hold a reference on the lseg.  That ref
+	 * is normally transferred to the COMMIT call and released
+	 * there.  It could also be released if the last req is pulled
+	 * off due to a rewrite, in which case it will be done in
+	 * pnfs_common_clear_request_commit
+	 */
+	if (!bucket->lseg)
+		bucket->lseg = pnfs_get_lseg(lseg);
 	set_bit(PG_COMMIT_TO_DS, &req->wb_flags);
 	cinfo->ds->nwritten++;
 
 	nfs_request_add_commit_list_locked(req, list, cinfo);
 	mutex_unlock(&NFS_I(cinfo->inode)->commit_mutex);
 	nfs_mark_page_unstable(req->wb_page, cinfo);
+	return;
+out_resched:
+	mutex_unlock(&NFS_I(cinfo->inode)->commit_mutex);
+	cinfo->completion_ops->resched_write(cinfo, req);
 }
 EXPORT_SYMBOL_GPL(pnfs_layout_mark_request_commit);
 
diff --git a/fs/nfs/read.c b/fs/nfs/read.c
index 34bb9ad..13b22e89 100644
--- a/fs/nfs/read.c
+++ b/fs/nfs/read.c
@@ -250,7 +250,7 @@ static int nfs_readpage_done(struct rpc_task *task,
 	trace_nfs_readpage_done(task, hdr);
 
 	if (task->tk_status == -ESTALE) {
-		set_bit(NFS_INO_STALE, &NFS_I(inode)->flags);
+		nfs_set_inode_stale(inode);
 		nfs_mark_for_revalidate(inode);
 	}
 	return 0;
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index bb14bed..59ef3b1 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -176,6 +176,41 @@ void nfs_sb_deactive(struct super_block *sb)
 }
 EXPORT_SYMBOL_GPL(nfs_sb_deactive);
 
+static int __nfs_list_for_each_server(struct list_head *head,
+		int (*fn)(struct nfs_server *, void *),
+		void *data)
+{
+	struct nfs_server *server, *last = NULL;
+	int ret = 0;
+
+	rcu_read_lock();
+	list_for_each_entry_rcu(server, head, client_link) {
+		if (!nfs_sb_active(server->super))
+			continue;
+		rcu_read_unlock();
+		if (last)
+			nfs_sb_deactive(last->super);
+		last = server;
+		ret = fn(server, data);
+		if (ret)
+			goto out;
+		rcu_read_lock();
+	}
+	rcu_read_unlock();
+out:
+	if (last)
+		nfs_sb_deactive(last->super);
+	return ret;
+}
+
+int nfs_client_for_each_server(struct nfs_client *clp,
+		int (*fn)(struct nfs_server *, void *),
+		void *data)
+{
+	return __nfs_list_for_each_server(&clp->cl_superblocks, fn, data);
+}
+EXPORT_SYMBOL_GPL(nfs_client_for_each_server);
+
 /*
  * Deliver file system statistics to userspace
  */
diff --git a/fs/nfs/unlink.c b/fs/nfs/unlink.c
index 0effeee..b27ebdc 100644
--- a/fs/nfs/unlink.c
+++ b/fs/nfs/unlink.c
@@ -98,7 +98,7 @@ static void nfs_do_call_unlink(struct inode *inode, struct nfs_unlinkdata *data)
 		.callback_ops = &nfs_unlink_ops,
 		.callback_data = data,
 		.workqueue = nfsiod_workqueue,
-		.flags = RPC_TASK_ASYNC,
+		.flags = RPC_TASK_ASYNC | RPC_TASK_CRED_NOREF,
 	};
 	struct rpc_task *task;
 	struct inode *dir = d_inode(data->dentry->d_parent);
@@ -341,7 +341,7 @@ nfs_async_rename(struct inode *old_dir, struct inode *new_dir,
 		.callback_ops = &nfs_rename_ops,
 		.workqueue = nfsiod_workqueue,
 		.rpc_client = NFS_CLIENT(old_dir),
-		.flags = RPC_TASK_ASYNC,
+		.flags = RPC_TASK_ASYNC | RPC_TASK_CRED_NOREF,
 	};
 
 	data = kzalloc(sizeof(*data), GFP_KERNEL);
diff --git a/fs/nfs/write.c b/fs/nfs/write.c
index c478b77..df4b87c 100644
--- a/fs/nfs/write.c
+++ b/fs/nfs/write.c
@@ -149,6 +149,31 @@ static void nfs_io_completion_put(struct nfs_io_completion *ioc)
 		kref_put(&ioc->refcount, nfs_io_completion_release);
 }
 
+static void
+nfs_page_set_inode_ref(struct nfs_page *req, struct inode *inode)
+{
+	if (!test_and_set_bit(PG_INODE_REF, &req->wb_flags)) {
+		kref_get(&req->wb_kref);
+		atomic_long_inc(&NFS_I(inode)->nrequests);
+	}
+}
+
+static int
+nfs_cancel_remove_inode(struct nfs_page *req, struct inode *inode)
+{
+	int ret;
+
+	if (!test_bit(PG_REMOVE, &req->wb_flags))
+		return 0;
+	ret = nfs_page_group_lock(req);
+	if (ret)
+		return ret;
+	if (test_and_clear_bit(PG_REMOVE, &req->wb_flags))
+		nfs_page_set_inode_ref(req, inode);
+	nfs_page_group_unlock(req);
+	return 0;
+}
+
 static struct nfs_page *
 nfs_page_private_request(struct page *page)
 {
@@ -218,6 +243,36 @@ static struct nfs_page *nfs_page_find_head_request(struct page *page)
 	return req;
 }
 
+static struct nfs_page *nfs_find_and_lock_page_request(struct page *page)
+{
+	struct inode *inode = page_file_mapping(page)->host;
+	struct nfs_page *req, *head;
+	int ret;
+
+	for (;;) {
+		req = nfs_page_find_head_request(page);
+		if (!req)
+			return req;
+		head = nfs_page_group_lock_head(req);
+		if (head != req)
+			nfs_release_request(req);
+		if (IS_ERR(head))
+			return head;
+		ret = nfs_cancel_remove_inode(head, inode);
+		if (ret < 0) {
+			nfs_unlock_and_release_request(head);
+			return ERR_PTR(ret);
+		}
+		/* Ensure that nobody removed the request before we locked it */
+		if (head == nfs_page_private_request(page))
+			break;
+		if (PageSwapCache(page))
+			break;
+		nfs_unlock_and_release_request(head);
+	}
+	return head;
+}
+
 /* Adjust the file length if we're writing beyond the end */
 static void nfs_grow_file(struct page *page, unsigned int offset, unsigned int count)
 {
@@ -380,34 +435,6 @@ static void nfs_end_page_writeback(struct nfs_page *req)
 }
 
 /*
- * nfs_unroll_locks_and_wait -  unlock all newly locked reqs and wait on @req
- *
- * this is a helper function for nfs_lock_and_join_requests
- *
- * @inode - inode associated with request page group, must be holding inode lock
- * @head  - head request of page group, must be holding head lock
- * @req   - request that couldn't lock and needs to wait on the req bit lock
- *
- * NOTE: this must be called holding page_group bit lock
- *       which will be released before returning.
- *
- * returns 0 on success, < 0 on error.
- */
-static void
-nfs_unroll_locks(struct inode *inode, struct nfs_page *head,
-			  struct nfs_page *req)
-{
-	struct nfs_page *tmp;
-
-	/* relinquish all the locks successfully grabbed this run */
-	for (tmp = head->wb_this_page ; tmp != req; tmp = tmp->wb_this_page) {
-		if (!kref_read(&tmp->wb_kref))
-			continue;
-		nfs_unlock_and_release_request(tmp);
-	}
-}
-
-/*
  * nfs_destroy_unlinked_subrequests - destroy recently unlinked subrequests
  *
  * @destroy_list - request list (using wb_this_page) terminated by @old_head
@@ -428,22 +455,29 @@ nfs_destroy_unlinked_subrequests(struct nfs_page *destroy_list,
 		destroy_list = (subreq->wb_this_page == old_head) ?
 				   NULL : subreq->wb_this_page;
 
+		/* Note: lock subreq in order to change subreq->wb_head */
+		nfs_page_set_headlock(subreq);
 		WARN_ON_ONCE(old_head != subreq->wb_head);
 
 		/* make sure old group is not used */
 		subreq->wb_this_page = subreq;
+		subreq->wb_head = subreq;
 
 		clear_bit(PG_REMOVE, &subreq->wb_flags);
 
 		/* Note: races with nfs_page_group_destroy() */
 		if (!kref_read(&subreq->wb_kref)) {
 			/* Check if we raced with nfs_page_group_destroy() */
-			if (test_and_clear_bit(PG_TEARDOWN, &subreq->wb_flags))
+			if (test_and_clear_bit(PG_TEARDOWN, &subreq->wb_flags)) {
+				nfs_page_clear_headlock(subreq);
 				nfs_free_request(subreq);
+			} else
+				nfs_page_clear_headlock(subreq);
 			continue;
 		}
+		nfs_page_clear_headlock(subreq);
 
-		subreq->wb_head = subreq;
+		nfs_release_request(old_head);
 
 		if (test_and_clear_bit(PG_INODE_REF, &subreq->wb_flags)) {
 			nfs_release_request(subreq);
@@ -457,11 +491,64 @@ nfs_destroy_unlinked_subrequests(struct nfs_page *destroy_list,
 }
 
 /*
- * nfs_lock_and_join_requests - join all subreqs to the head req and return
- *                              a locked reference, cancelling any pending
- *                              operations for this page.
+ * nfs_join_page_group - destroy subrequests of the head req
+ * @head: the page used to lookup the "page group" of nfs_page structures
+ * @inode: Inode to which the request belongs.
  *
- * @page - the page used to lookup the "page group" of nfs_page structures
+ * This function joins all sub requests to the head request by first
+ * locking all requests in the group, cancelling any pending operations
+ * and finally updating the head request to cover the whole range covered by
+ * the (former) group.  All subrequests are removed from any write or commit
+ * lists, unlinked from the group and destroyed.
+ */
+void
+nfs_join_page_group(struct nfs_page *head, struct inode *inode)
+{
+	struct nfs_page *subreq;
+	struct nfs_page *destroy_list = NULL;
+	unsigned int pgbase, off, bytes;
+
+	pgbase = head->wb_pgbase;
+	bytes = head->wb_bytes;
+	off = head->wb_offset;
+	for (subreq = head->wb_this_page; subreq != head;
+			subreq = subreq->wb_this_page) {
+		/* Subrequests should always form a contiguous range */
+		if (pgbase > subreq->wb_pgbase) {
+			off -= pgbase - subreq->wb_pgbase;
+			bytes += pgbase - subreq->wb_pgbase;
+			pgbase = subreq->wb_pgbase;
+		}
+		bytes = max(subreq->wb_pgbase + subreq->wb_bytes
+				- pgbase, bytes);
+	}
+
+	/* Set the head request's range to cover the former page group */
+	head->wb_pgbase = pgbase;
+	head->wb_bytes = bytes;
+	head->wb_offset = off;
+
+	/* Now that all requests are locked, make sure they aren't on any list.
+	 * Commit list removal accounting is done after locks are dropped */
+	subreq = head;
+	do {
+		nfs_clear_request_commit(subreq);
+		subreq = subreq->wb_this_page;
+	} while (subreq != head);
+
+	/* unlink subrequests from head, destroy them later */
+	if (head->wb_this_page != head) {
+		/* destroy list will be terminated by head */
+		destroy_list = head->wb_this_page;
+		head->wb_this_page = head;
+	}
+
+	nfs_destroy_unlinked_subrequests(destroy_list, head, inode);
+}
+
+/*
+ * nfs_lock_and_join_requests - join all subreqs to the head req
+ * @page: the page used to lookup the "page group" of nfs_page structures
  *
  * This function joins all sub requests to the head request by first
  * locking all requests in the group, cancelling any pending operations
@@ -478,127 +565,28 @@ static struct nfs_page *
 nfs_lock_and_join_requests(struct page *page)
 {
 	struct inode *inode = page_file_mapping(page)->host;
-	struct nfs_page *head, *subreq;
-	struct nfs_page *destroy_list = NULL;
-	unsigned int total_bytes;
+	struct nfs_page *head;
 	int ret;
 
-try_again:
 	/*
 	 * A reference is taken only on the head request which acts as a
 	 * reference to the whole page group - the group will not be destroyed
 	 * until the head reference is released.
 	 */
-	head = nfs_page_find_head_request(page);
-	if (!head)
-		return NULL;
-
-	/* lock the page head first in order to avoid an ABBA inefficiency */
-	if (!nfs_lock_request(head)) {
-		ret = nfs_wait_on_request(head);
-		nfs_release_request(head);
-		if (ret < 0)
-			return ERR_PTR(ret);
-		goto try_again;
-	}
-
-	/* Ensure that nobody removed the request before we locked it */
-	if (head != nfs_page_private_request(page) && !PageSwapCache(page)) {
-		nfs_unlock_and_release_request(head);
-		goto try_again;
-	}
-
-	ret = nfs_page_group_lock(head);
-	if (ret < 0)
-		goto release_request;
+	head = nfs_find_and_lock_page_request(page);
+	if (IS_ERR_OR_NULL(head))
+		return head;
 
 	/* lock each request in the page group */
-	total_bytes = head->wb_bytes;
-	for (subreq = head->wb_this_page; subreq != head;
-			subreq = subreq->wb_this_page) {
-
-		if (!kref_get_unless_zero(&subreq->wb_kref)) {
-			if (subreq->wb_offset == head->wb_offset + total_bytes)
-				total_bytes += subreq->wb_bytes;
-			continue;
-		}
-
-		while (!nfs_lock_request(subreq)) {
-			/*
-			 * Unlock page to allow nfs_page_group_sync_on_bit()
-			 * to succeed
-			 */
-			nfs_page_group_unlock(head);
-			ret = nfs_wait_on_request(subreq);
-			if (!ret)
-				ret = nfs_page_group_lock(head);
-			if (ret < 0) {
-				nfs_unroll_locks(inode, head, subreq);
-				nfs_release_request(subreq);
-				goto release_request;
-			}
-		}
-		/*
-		 * Subrequests are always contiguous, non overlapping
-		 * and in order - but may be repeated (mirrored writes).
-		 */
-		if (subreq->wb_offset == (head->wb_offset + total_bytes)) {
-			/* keep track of how many bytes this group covers */
-			total_bytes += subreq->wb_bytes;
-		} else if (WARN_ON_ONCE(subreq->wb_offset < head->wb_offset ||
-			    ((subreq->wb_offset + subreq->wb_bytes) >
-			     (head->wb_offset + total_bytes)))) {
-			nfs_page_group_unlock(head);
-			nfs_unroll_locks(inode, head, subreq);
-			nfs_unlock_and_release_request(subreq);
-			ret = -EIO;
-			goto release_request;
-		}
-	}
-
-	/* Now that all requests are locked, make sure they aren't on any list.
-	 * Commit list removal accounting is done after locks are dropped */
-	subreq = head;
-	do {
-		nfs_clear_request_commit(subreq);
-		subreq = subreq->wb_this_page;
-	} while (subreq != head);
-
-	/* unlink subrequests from head, destroy them later */
-	if (head->wb_this_page != head) {
-		/* destroy list will be terminated by head */
-		destroy_list = head->wb_this_page;
-		head->wb_this_page = head;
-
-		/* change head request to cover whole range that
-		 * the former page group covered */
-		head->wb_bytes = total_bytes;
-	}
-
-	/* Postpone destruction of this request */
-	if (test_and_clear_bit(PG_REMOVE, &head->wb_flags)) {
-		set_bit(PG_INODE_REF, &head->wb_flags);
-		kref_get(&head->wb_kref);
-		atomic_long_inc(&NFS_I(inode)->nrequests);
-	}
-
-	nfs_page_group_unlock(head);
-
-	nfs_destroy_unlinked_subrequests(destroy_list, head, inode);
-
-	/* Did we lose a race with nfs_inode_remove_request()? */
-	if (!(PagePrivate(page) || PageSwapCache(page))) {
+	ret = nfs_page_group_lock_subrequests(head);
+	if (ret < 0) {
 		nfs_unlock_and_release_request(head);
-		return NULL;
+		return ERR_PTR(ret);
 	}
 
-	/* still holds ref on head from nfs_page_find_head_request
-	 * and still has lock on head from lock loop */
-	return head;
+	nfs_join_page_group(head, inode);
 
-release_request:
-	nfs_unlock_and_release_request(head);
-	return ERR_PTR(ret);
+	return head;
 }
 
 static void nfs_write_error(struct nfs_page *req, int error)
@@ -1707,7 +1695,7 @@ int nfs_initiate_commit(struct rpc_clnt *clnt, struct nfs_commit_data *data,
 		.callback_ops = call_ops,
 		.callback_data = data,
 		.workqueue = nfsiod_workqueue,
-		.flags = RPC_TASK_ASYNC | flags,
+		.flags = RPC_TASK_ASYNC | RPC_TASK_CRED_NOREF | flags,
 		.priority = priority,
 	};
 	/* Set up the initial task struct.  */
@@ -1746,14 +1734,19 @@ void nfs_init_commit(struct nfs_commit_data *data,
 		     struct pnfs_layout_segment *lseg,
 		     struct nfs_commit_info *cinfo)
 {
-	struct nfs_page *first = nfs_list_entry(head->next);
-	struct nfs_open_context *ctx = nfs_req_openctx(first);
-	struct inode *inode = d_inode(ctx->dentry);
+	struct nfs_page *first;
+	struct nfs_open_context *ctx;
+	struct inode *inode;
 
 	/* Set up the RPC argument and reply structs
 	 * NB: take care not to mess about with data->commit et al. */
 
-	list_splice_init(head, &data->pages);
+	if (head)
+		list_splice_init(head, &data->pages);
+
+	first = nfs_list_entry(data->pages.next);
+	ctx = nfs_req_openctx(first);
+	inode = d_inode(ctx->dentry);
 
 	data->inode	  = inode;
 	data->cred	  = ctx->cred;
@@ -1869,8 +1862,7 @@ static void nfs_commit_release_pages(struct nfs_commit_data *data)
 
 		/* Okay, COMMIT succeeded, apparently. Check the verifier
 		 * returned by the server against all stored verfs. */
-		if (verf->committed > NFS_UNSTABLE &&
-		    !nfs_write_verifier_cmp(&req->wb_verf, &verf->verifier)) {
+		if (nfs_write_match_verf(verf, req)) {
 			/* We have a match */
 			if (req->wb_page)
 				nfs_inode_remove_request(req);
diff --git a/fs/nfsd/Kconfig b/fs/nfsd/Kconfig
index f368f32..99d2cae 100644
--- a/fs/nfsd/Kconfig
+++ b/fs/nfsd/Kconfig
@@ -136,7 +136,7 @@
 
 config NFSD_V4_2_INTER_SSC
 	bool "NFSv4.2 inter server to server COPY"
-	depends on NFSD_V4 && NFS_V4_1 && NFS_V4_2
+	depends on NFSD_V4 && NFS_V4_1 && NFS_V4_2 && NFS_FS=y
 	help
 	  This option enables support for NFSv4.2 inter server to
 	  server copy where the destination server calls the NFSv4.2
diff --git a/fs/nfsd/export.c b/fs/nfsd/export.c
index 15422c9..cb777fe 100644
--- a/fs/nfsd/export.c
+++ b/fs/nfsd/export.c
@@ -23,6 +23,7 @@
 #include "netns.h"
 #include "pnfs.h"
 #include "filecache.h"
+#include "trace.h"
 
 #define NFSDDBG_FACILITY	NFSDDBG_EXPORT
 
@@ -50,6 +51,11 @@ static void expkey_put(struct kref *ref)
 	kfree_rcu(key, ek_rcu);
 }
 
+static int expkey_upcall(struct cache_detail *cd, struct cache_head *h)
+{
+	return sunrpc_cache_pipe_upcall(cd, h);
+}
+
 static void expkey_request(struct cache_detail *cd,
 			   struct cache_head *h,
 			   char **bpp, int *blen)
@@ -140,7 +146,9 @@ static int expkey_parse(struct cache_detail *cd, char *mesg, int mlen)
 	if (len == 0) {
 		set_bit(CACHE_NEGATIVE, &key.h.flags);
 		ek = svc_expkey_update(cd, &key, ek);
-		if (!ek)
+		if (ek)
+			trace_nfsd_expkey_update(ek, NULL);
+		else
 			err = -ENOMEM;
 	} else {
 		err = kern_path(buf, 0, &key.ek_path);
@@ -150,7 +158,9 @@ static int expkey_parse(struct cache_detail *cd, char *mesg, int mlen)
 		dprintk("Found the path %s\n", buf);
 
 		ek = svc_expkey_update(cd, &key, ek);
-		if (!ek)
+		if (ek)
+			trace_nfsd_expkey_update(ek, buf);
+		else
 			err = -ENOMEM;
 		path_put(&key.ek_path);
 	}
@@ -249,6 +259,7 @@ static const struct cache_detail svc_expkey_cache_template = {
 	.hash_size	= EXPKEY_HASHMAX,
 	.name		= "nfsd.fh",
 	.cache_put	= expkey_put,
+	.cache_upcall	= expkey_upcall,
 	.cache_request	= expkey_request,
 	.cache_parse	= expkey_parse,
 	.cache_show	= expkey_show,
@@ -330,6 +341,11 @@ static void svc_export_put(struct kref *ref)
 	kfree_rcu(exp, ex_rcu);
 }
 
+static int svc_export_upcall(struct cache_detail *cd, struct cache_head *h)
+{
+	return sunrpc_cache_pipe_upcall(cd, h);
+}
+
 static void svc_export_request(struct cache_detail *cd,
 			       struct cache_head *h,
 			       char **bpp, int *blen)
@@ -643,15 +659,17 @@ static int svc_export_parse(struct cache_detail *cd, char *mesg, int mlen)
 	}
 
 	expp = svc_export_lookup(&exp);
-	if (expp)
-		expp = svc_export_update(&exp, expp);
-	else
+	if (!expp) {
 		err = -ENOMEM;
-	cache_flush();
-	if (expp == NULL)
-		err = -ENOMEM;
-	else
+		goto out4;
+	}
+	expp = svc_export_update(&exp, expp);
+	if (expp) {
+		trace_nfsd_export_update(expp);
+		cache_flush();
 		exp_put(expp);
+	} else
+		err = -ENOMEM;
 out4:
 	nfsd4_fslocs_free(&exp.ex_fslocs);
 	kfree(exp.ex_uuid);
@@ -767,6 +785,7 @@ static const struct cache_detail svc_export_cache_template = {
 	.hash_size	= EXPORT_HASHMAX,
 	.name		= "nfsd.export",
 	.cache_put	= svc_export_put,
+	.cache_upcall	= svc_export_upcall,
 	.cache_request	= svc_export_request,
 	.cache_parse	= svc_export_parse,
 	.cache_show	= svc_export_show,
@@ -832,8 +851,10 @@ exp_find_key(struct cache_detail *cd, struct auth_domain *clp, int fsid_type,
 	if (ek == NULL)
 		return ERR_PTR(-ENOMEM);
 	err = cache_check(cd, &ek->h, reqp);
-	if (err)
+	if (err) {
+		trace_nfsd_exp_find_key(&key, err);
 		return ERR_PTR(err);
+	}
 	return ek;
 }
 
@@ -855,8 +876,10 @@ exp_get_by_name(struct cache_detail *cd, struct auth_domain *clp,
 	if (exp == NULL)
 		return ERR_PTR(-ENOMEM);
 	err = cache_check(cd, &exp->h, reqp);
-	if (err)
+	if (err) {
+		trace_nfsd_exp_get_by_name(&key, err);
 		return ERR_PTR(err);
+	}
 	return exp;
 }
 
diff --git a/fs/nfsd/filecache.c b/fs/nfsd/filecache.c
index 22e77ed..82198d7 100644
--- a/fs/nfsd/filecache.c
+++ b/fs/nfsd/filecache.c
@@ -890,7 +890,7 @@ nfsd_file_find_locked(struct inode *inode, unsigned int may_flags,
 	unsigned char need = may_flags & NFSD_FILE_MAY_MASK;
 
 	hlist_for_each_entry_rcu(nf, &nfsd_file_hashtbl[hashval].nfb_head,
-				 nf_node) {
+				 nf_node, lockdep_is_held(&nfsd_file_hashtbl[hashval].nfb_lock)) {
 		if ((need & nf->nf_may) != need)
 			continue;
 		if (nf->nf_inode != inode)
diff --git a/fs/nfsd/netns.h b/fs/nfsd/netns.h
index 2baf323..09aa545 100644
--- a/fs/nfsd/netns.h
+++ b/fs/nfsd/netns.h
@@ -172,6 +172,8 @@ struct nfsd_net {
 	unsigned int             longest_chain_cachesize;
 
 	struct shrinker		nfsd_reply_cache_shrinker;
+	/* utsname taken from the the process that starts the server */
+	char			nfsd_name[UNX_MAXNODENAME+1];
 };
 
 /* Simple check to find out if a given net was properly initialized */
diff --git a/fs/nfsd/nfs4idmap.c b/fs/nfsd/nfs4idmap.c
index d1f2852..9460be8 100644
--- a/fs/nfsd/nfs4idmap.c
+++ b/fs/nfsd/nfs4idmap.c
@@ -122,6 +122,12 @@ idtoname_hash(struct ent *ent)
 	return hash;
 }
 
+static int
+idtoname_upcall(struct cache_detail *cd, struct cache_head *h)
+{
+	return sunrpc_cache_pipe_upcall_timeout(cd, h);
+}
+
 static void
 idtoname_request(struct cache_detail *cd, struct cache_head *ch, char **bpp,
     int *blen)
@@ -184,6 +190,7 @@ static const struct cache_detail idtoname_cache_template = {
 	.hash_size	= ENT_HASHMAX,
 	.name		= "nfs4.idtoname",
 	.cache_put	= ent_put,
+	.cache_upcall	= idtoname_upcall,
 	.cache_request	= idtoname_request,
 	.cache_parse	= idtoname_parse,
 	.cache_show	= idtoname_show,
@@ -295,6 +302,12 @@ nametoid_hash(struct ent *ent)
 	return hash_str(ent->name, ENT_HASHBITS);
 }
 
+static int
+nametoid_upcall(struct cache_detail *cd, struct cache_head *h)
+{
+	return sunrpc_cache_pipe_upcall_timeout(cd, h);
+}
+
 static void
 nametoid_request(struct cache_detail *cd, struct cache_head *ch, char **bpp,
     int *blen)
@@ -347,6 +360,7 @@ static const struct cache_detail nametoid_cache_template = {
 	.hash_size	= ENT_HASHMAX,
 	.name		= "nfs4.nametoid",
 	.cache_put	= ent_put,
+	.cache_upcall	= nametoid_upcall,
 	.cache_request	= nametoid_request,
 	.cache_parse	= nametoid_parse,
 	.cache_show	= nametoid_show,
diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c
index 65cfe9a..e32eced 100644
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -494,6 +494,8 @@ find_any_file(struct nfs4_file *f)
 {
 	struct nfsd_file *ret;
 
+	if (!f)
+		return NULL;
 	spin_lock(&f->fi_lock);
 	ret = __nfs4_get_fd(f, O_RDWR);
 	if (!ret) {
@@ -1309,6 +1311,12 @@ static void nfs4_put_stateowner(struct nfs4_stateowner *sop)
 	nfs4_free_stateowner(sop);
 }
 
+static bool
+nfs4_ol_stateid_unhashed(const struct nfs4_ol_stateid *stp)
+{
+	return list_empty(&stp->st_perfile);
+}
+
 static bool unhash_ol_stateid(struct nfs4_ol_stateid *stp)
 {
 	struct nfs4_file *fp = stp->st_stid.sc_file;
@@ -1379,9 +1387,11 @@ static bool unhash_lock_stateid(struct nfs4_ol_stateid *stp)
 {
 	lockdep_assert_held(&stp->st_stid.sc_client->cl_lock);
 
+	if (!unhash_ol_stateid(stp))
+		return false;
 	list_del_init(&stp->st_locks);
 	nfs4_unhash_stid(&stp->st_stid);
-	return unhash_ol_stateid(stp);
+	return true;
 }
 
 static void release_lock_stateid(struct nfs4_ol_stateid *stp)
@@ -1446,13 +1456,12 @@ static void release_open_stateid_locks(struct nfs4_ol_stateid *open_stp,
 static bool unhash_open_stateid(struct nfs4_ol_stateid *stp,
 				struct list_head *reaplist)
 {
-	bool unhashed;
-
 	lockdep_assert_held(&stp->st_stid.sc_client->cl_lock);
 
-	unhashed = unhash_ol_stateid(stp);
+	if (!unhash_ol_stateid(stp))
+		return false;
 	release_open_stateid_locks(stp, reaplist);
-	return unhashed;
+	return true;
 }
 
 static void release_open_stateid(struct nfs4_ol_stateid *stp)
@@ -2636,7 +2645,7 @@ static const struct file_operations client_ctl_fops = {
 static const struct tree_descr client_files[] = {
 	[0] = {"info", &client_info_fops, S_IRUSR},
 	[1] = {"states", &client_states_fops, S_IRUSR},
-	[2] = {"ctl", &client_ctl_fops, S_IRUSR|S_IWUSR},
+	[2] = {"ctl", &client_ctl_fops, S_IWUSR},
 	[3] = {""},
 };
 
@@ -4343,7 +4352,8 @@ find_file_locked(struct knfsd_fh *fh, unsigned int hashval)
 {
 	struct nfs4_file *fp;
 
-	hlist_for_each_entry_rcu(fp, &file_hashtbl[hashval], fi_hash) {
+	hlist_for_each_entry_rcu(fp, &file_hashtbl[hashval], fi_hash,
+				lockdep_is_held(&state_lock)) {
 		if (fh_match(&fp->fi_fhandle, fh)) {
 			if (refcount_inc_not_zero(&fp->fi_ref))
 				return fp;
@@ -5521,15 +5531,8 @@ static __be32 nfsd4_validate_stateid(struct nfs4_client *cl, stateid_t *stateid)
 	if (ZERO_STATEID(stateid) || ONE_STATEID(stateid) ||
 		CLOSE_STATEID(stateid))
 		return status;
-	/* Client debugging aid. */
-	if (!same_clid(&stateid->si_opaque.so_clid, &cl->cl_clientid)) {
-		char addr_str[INET6_ADDRSTRLEN];
-		rpc_ntop((struct sockaddr *)&cl->cl_addr, addr_str,
-				 sizeof(addr_str));
-		pr_warn_ratelimited("NFSD: client %s testing state ID "
-					"with incorrect client ID\n", addr_str);
+	if (!same_clid(&stateid->si_opaque.so_clid, &cl->cl_clientid))
 		return status;
-	}
 	spin_lock(&cl->cl_lock);
 	s = find_stateid_locked(cl, stateid);
 	if (!s)
@@ -6393,21 +6396,21 @@ alloc_init_lock_stateowner(unsigned int strhashval, struct nfs4_client *clp,
 }
 
 static struct nfs4_ol_stateid *
-find_lock_stateid(struct nfs4_lockowner *lo, struct nfs4_file *fp)
+find_lock_stateid(const struct nfs4_lockowner *lo,
+		  const struct nfs4_ol_stateid *ost)
 {
 	struct nfs4_ol_stateid *lst;
-	struct nfs4_client *clp = lo->lo_owner.so_client;
 
-	lockdep_assert_held(&clp->cl_lock);
+	lockdep_assert_held(&ost->st_stid.sc_client->cl_lock);
 
-	list_for_each_entry(lst, &lo->lo_owner.so_stateids, st_perstateowner) {
-		if (lst->st_stid.sc_type != NFS4_LOCK_STID)
-			continue;
-		if (lst->st_stid.sc_file == fp) {
-			refcount_inc(&lst->st_stid.sc_count);
-			return lst;
+	/* If ost is not hashed, ost->st_locks will not be valid */
+	if (!nfs4_ol_stateid_unhashed(ost))
+		list_for_each_entry(lst, &ost->st_locks, st_locks) {
+			if (lst->st_stateowner == &lo->lo_owner) {
+				refcount_inc(&lst->st_stid.sc_count);
+				return lst;
+			}
 		}
-	}
 	return NULL;
 }
 
@@ -6423,11 +6426,11 @@ init_lock_stateid(struct nfs4_ol_stateid *stp, struct nfs4_lockowner *lo,
 	mutex_lock_nested(&stp->st_mutex, OPEN_STATEID_MUTEX);
 retry:
 	spin_lock(&clp->cl_lock);
-	spin_lock(&fp->fi_lock);
-	retstp = find_lock_stateid(lo, fp);
+	if (nfs4_ol_stateid_unhashed(open_stp))
+		goto out_close;
+	retstp = find_lock_stateid(lo, open_stp);
 	if (retstp)
-		goto out_unlock;
-
+		goto out_found;
 	refcount_inc(&stp->st_stid.sc_count);
 	stp->st_stid.sc_type = NFS4_LOCK_STID;
 	stp->st_stateowner = nfs4_get_stateowner(&lo->lo_owner);
@@ -6436,22 +6439,26 @@ init_lock_stateid(struct nfs4_ol_stateid *stp, struct nfs4_lockowner *lo,
 	stp->st_access_bmap = 0;
 	stp->st_deny_bmap = open_stp->st_deny_bmap;
 	stp->st_openstp = open_stp;
+	spin_lock(&fp->fi_lock);
 	list_add(&stp->st_locks, &open_stp->st_locks);
 	list_add(&stp->st_perstateowner, &lo->lo_owner.so_stateids);
 	list_add(&stp->st_perfile, &fp->fi_stateids);
-out_unlock:
 	spin_unlock(&fp->fi_lock);
 	spin_unlock(&clp->cl_lock);
-	if (retstp) {
-		if (nfsd4_lock_ol_stateid(retstp) != nfs_ok) {
-			nfs4_put_stid(&retstp->st_stid);
-			goto retry;
-		}
-		/* To keep mutex tracking happy */
-		mutex_unlock(&stp->st_mutex);
-		stp = retstp;
-	}
 	return stp;
+out_found:
+	spin_unlock(&clp->cl_lock);
+	if (nfsd4_lock_ol_stateid(retstp) != nfs_ok) {
+		nfs4_put_stid(&retstp->st_stid);
+		goto retry;
+	}
+	/* To keep mutex tracking happy */
+	mutex_unlock(&stp->st_mutex);
+	return retstp;
+out_close:
+	spin_unlock(&clp->cl_lock);
+	mutex_unlock(&stp->st_mutex);
+	return NULL;
 }
 
 static struct nfs4_ol_stateid *
@@ -6466,7 +6473,7 @@ find_or_create_lock_stateid(struct nfs4_lockowner *lo, struct nfs4_file *fi,
 
 	*new = false;
 	spin_lock(&clp->cl_lock);
-	lst = find_lock_stateid(lo, fi);
+	lst = find_lock_stateid(lo, ost);
 	spin_unlock(&clp->cl_lock);
 	if (lst != NULL) {
 		if (nfsd4_lock_ol_stateid(lst) == nfs_ok)
diff --git a/fs/nfsd/nfs4xdr.c b/fs/nfsd/nfs4xdr.c
index 9761512..996ac01 100644
--- a/fs/nfsd/nfs4xdr.c
+++ b/fs/nfsd/nfs4xdr.c
@@ -3591,23 +3591,22 @@ static __be32 nfsd4_encode_readv(struct nfsd4_compoundres *resp,
 	__be32 nfserr;
 	__be32 tmp;
 	__be32 *p;
-	u32 zzz = 0;
 	int pad;
 
+	/*
+	 * svcrdma requires every READ payload to start somewhere
+	 * in xdr->pages.
+	 */
+	if (xdr->iov == xdr->buf->head) {
+		xdr->iov = NULL;
+		xdr->end = xdr->p;
+	}
+
 	len = maxcount;
 	v = 0;
-
-	thislen = min_t(long, len, ((void *)xdr->end - (void *)xdr->p));
-	p = xdr_reserve_space(xdr, (thislen+3)&~3);
-	WARN_ON_ONCE(!p);
-	resp->rqstp->rq_vec[v].iov_base = p;
-	resp->rqstp->rq_vec[v].iov_len = thislen;
-	v++;
-	len -= thislen;
-
 	while (len) {
 		thislen = min_t(long, len, PAGE_SIZE);
-		p = xdr_reserve_space(xdr, (thislen+3)&~3);
+		p = xdr_reserve_space(xdr, thislen);
 		WARN_ON_ONCE(!p);
 		resp->rqstp->rq_vec[v].iov_base = p;
 		resp->rqstp->rq_vec[v].iov_len = thislen;
@@ -3616,23 +3615,25 @@ static __be32 nfsd4_encode_readv(struct nfsd4_compoundres *resp,
 	}
 	read->rd_vlen = v;
 
-	len = maxcount;
 	nfserr = nfsd_readv(resp->rqstp, read->rd_fhp, file, read->rd_offset,
 			    resp->rqstp->rq_vec, read->rd_vlen, &maxcount,
 			    &eof);
 	read->rd_length = maxcount;
 	if (nfserr)
 		return nfserr;
-	xdr_truncate_encode(xdr, starting_len + 8 + ((maxcount+3)&~3));
+	if (svc_encode_read_payload(resp->rqstp, starting_len + 8, maxcount))
+		return nfserr_io;
+	xdr_truncate_encode(xdr, starting_len + 8 + xdr_align_size(maxcount));
 
 	tmp = htonl(eof);
 	write_bytes_to_xdr_buf(xdr->buf, starting_len    , &tmp, 4);
 	tmp = htonl(maxcount);
 	write_bytes_to_xdr_buf(xdr->buf, starting_len + 4, &tmp, 4);
 
+	tmp = xdr_zero;
 	pad = (maxcount&3) ? 4 - (maxcount&3) : 0;
 	write_bytes_to_xdr_buf(xdr->buf, starting_len + 8 + maxcount,
-								&zzz, pad);
+								&tmp, pad);
 	return 0;
 
 }
@@ -4005,11 +4006,12 @@ nfsd4_encode_exchange_id(struct nfsd4_compoundres *resp, __be32 nfserr,
 	int major_id_sz;
 	int server_scope_sz;
 	uint64_t minor_id = 0;
+	struct nfsd_net *nn = net_generic(SVC_NET(resp->rqstp), nfsd_net_id);
 
-	major_id = utsname()->nodename;
-	major_id_sz = strlen(major_id);
-	server_scope = utsname()->nodename;
-	server_scope_sz = strlen(server_scope);
+	major_id = nn->nfsd_name;
+	major_id_sz = strlen(nn->nfsd_name);
+	server_scope = nn->nfsd_name;
+	server_scope_sz = strlen(nn->nfsd_name);
 
 	p = xdr_reserve_space(xdr,
 		8 /* eir_clientid */ +
diff --git a/fs/nfsd/nfsctl.c b/fs/nfsd/nfsctl.c
index e109a10..3bb2db9 100644
--- a/fs/nfsd/nfsctl.c
+++ b/fs/nfsd/nfsctl.c
@@ -1333,6 +1333,7 @@ void nfsd_client_rmdir(struct dentry *dentry)
 	dget(dentry);
 	ret = simple_rmdir(dir, dentry);
 	WARN_ON_ONCE(ret);
+	fsnotify_rmdir(dir, dentry);
 	d_delete(dentry);
 	inode_unlock(dir);
 }
diff --git a/fs/nfsd/nfsfh.c b/fs/nfsd/nfsfh.c
index b319080..37bc8f5 100644
--- a/fs/nfsd/nfsfh.c
+++ b/fs/nfsd/nfsfh.c
@@ -14,6 +14,7 @@
 #include "nfsd.h"
 #include "vfs.h"
 #include "auth.h"
+#include "trace.h"
 
 #define NFSDDBG_FACILITY		NFSDDBG_FH
 
@@ -209,11 +210,14 @@ static __be32 nfsd_set_fh_dentry(struct svc_rqst *rqstp, struct svc_fh *fhp)
 	}
 
 	error = nfserr_stale;
-	if (PTR_ERR(exp) == -ENOENT)
-		return error;
+	if (IS_ERR(exp)) {
+		trace_nfsd_set_fh_dentry_badexport(rqstp, fhp, PTR_ERR(exp));
 
-	if (IS_ERR(exp))
+		if (PTR_ERR(exp) == -ENOENT)
+			return error;
+
 		return nfserrno(PTR_ERR(exp));
+	}
 
 	if (exp->ex_flags & NFSEXP_NOSUBTREECHECK) {
 		/* Elevate privileges so that the lack of 'r' or 'x'
@@ -267,6 +271,9 @@ static __be32 nfsd_set_fh_dentry(struct svc_rqst *rqstp, struct svc_fh *fhp)
 		dentry = exportfs_decode_fh(exp->ex_path.mnt, fid,
 				data_left, fileid_type,
 				nfsd_acceptable, exp);
+		if (IS_ERR_OR_NULL(dentry))
+			trace_nfsd_set_fh_dentry_badhandle(rqstp, fhp,
+					dentry ?  PTR_ERR(dentry) : -ESTALE);
 	}
 	if (dentry == NULL)
 		goto out;
diff --git a/fs/nfsd/nfssvc.c b/fs/nfsd/nfssvc.c
index 3b77b90..ca9fd34 100644
--- a/fs/nfsd/nfssvc.c
+++ b/fs/nfsd/nfssvc.c
@@ -749,6 +749,9 @@ nfsd_svc(int nrservs, struct net *net, const struct cred *cred)
 	if (nrservs == 0 && nn->nfsd_serv == NULL)
 		goto out;
 
+	strlcpy(nn->nfsd_name, utsname()->nodename,
+		sizeof(nn->nfsd_name));
+
 	error = nfsd_create_serv(net);
 	if (error)
 		goto out;
diff --git a/fs/nfsd/trace.h b/fs/nfsd/trace.h
index 06dd0d3..78c5742 100644
--- a/fs/nfsd/trace.h
+++ b/fs/nfsd/trace.h
@@ -9,6 +9,7 @@
 #define _NFSD_TRACE_H
 
 #include <linux/tracepoint.h>
+#include "export.h"
 #include "nfsfh.h"
 
 TRACE_EVENT(nfsd_compound,
@@ -50,6 +51,127 @@ TRACE_EVENT(nfsd_compound_status,
 		__get_str(name), __entry->status)
 )
 
+DECLARE_EVENT_CLASS(nfsd_fh_err_class,
+	TP_PROTO(struct svc_rqst *rqstp,
+		 struct svc_fh	*fhp,
+		 int		status),
+	TP_ARGS(rqstp, fhp, status),
+	TP_STRUCT__entry(
+		__field(u32, xid)
+		__field(u32, fh_hash)
+		__field(int, status)
+	),
+	TP_fast_assign(
+		__entry->xid = be32_to_cpu(rqstp->rq_xid);
+		__entry->fh_hash = knfsd_fh_hash(&fhp->fh_handle);
+		__entry->status = status;
+	),
+	TP_printk("xid=0x%08x fh_hash=0x%08x status=%d",
+		  __entry->xid, __entry->fh_hash,
+		  __entry->status)
+)
+
+#define DEFINE_NFSD_FH_ERR_EVENT(name)		\
+DEFINE_EVENT(nfsd_fh_err_class, nfsd_##name,	\
+	TP_PROTO(struct svc_rqst *rqstp,	\
+		 struct svc_fh	*fhp,		\
+		 int		status),	\
+	TP_ARGS(rqstp, fhp, status))
+
+DEFINE_NFSD_FH_ERR_EVENT(set_fh_dentry_badexport);
+DEFINE_NFSD_FH_ERR_EVENT(set_fh_dentry_badhandle);
+
+TRACE_EVENT(nfsd_exp_find_key,
+	TP_PROTO(const struct svc_expkey *key,
+		 int status),
+	TP_ARGS(key, status),
+	TP_STRUCT__entry(
+		__field(int, fsidtype)
+		__array(u32, fsid, 6)
+		__string(auth_domain, key->ek_client->name)
+		__field(int, status)
+	),
+	TP_fast_assign(
+		__entry->fsidtype = key->ek_fsidtype;
+		memcpy(__entry->fsid, key->ek_fsid, 4*6);
+		__assign_str(auth_domain, key->ek_client->name);
+		__entry->status = status;
+	),
+	TP_printk("fsid=%x::%s domain=%s status=%d",
+		__entry->fsidtype,
+		__print_array(__entry->fsid, 6, 4),
+		__get_str(auth_domain),
+		__entry->status
+	)
+);
+
+TRACE_EVENT(nfsd_expkey_update,
+	TP_PROTO(const struct svc_expkey *key, const char *exp_path),
+	TP_ARGS(key, exp_path),
+	TP_STRUCT__entry(
+		__field(int, fsidtype)
+		__array(u32, fsid, 6)
+		__string(auth_domain, key->ek_client->name)
+		__string(path, exp_path)
+		__field(bool, cache)
+	),
+	TP_fast_assign(
+		__entry->fsidtype = key->ek_fsidtype;
+		memcpy(__entry->fsid, key->ek_fsid, 4*6);
+		__assign_str(auth_domain, key->ek_client->name);
+		__assign_str(path, exp_path);
+		__entry->cache = !test_bit(CACHE_NEGATIVE, &key->h.flags);
+	),
+	TP_printk("fsid=%x::%s domain=%s path=%s cache=%s",
+		__entry->fsidtype,
+		__print_array(__entry->fsid, 6, 4),
+		__get_str(auth_domain),
+		__get_str(path),
+		__entry->cache ? "pos" : "neg"
+	)
+);
+
+TRACE_EVENT(nfsd_exp_get_by_name,
+	TP_PROTO(const struct svc_export *key,
+		 int status),
+	TP_ARGS(key, status),
+	TP_STRUCT__entry(
+		__string(path, key->ex_path.dentry->d_name.name)
+		__string(auth_domain, key->ex_client->name)
+		__field(int, status)
+	),
+	TP_fast_assign(
+		__assign_str(path, key->ex_path.dentry->d_name.name);
+		__assign_str(auth_domain, key->ex_client->name);
+		__entry->status = status;
+	),
+	TP_printk("path=%s domain=%s status=%d",
+		__get_str(path),
+		__get_str(auth_domain),
+		__entry->status
+	)
+);
+
+TRACE_EVENT(nfsd_export_update,
+	TP_PROTO(const struct svc_export *key),
+	TP_ARGS(key),
+	TP_STRUCT__entry(
+		__string(path, key->ex_path.dentry->d_name.name)
+		__string(auth_domain, key->ex_client->name)
+		__field(bool, cache)
+	),
+	TP_fast_assign(
+		__assign_str(path, key->ex_path.dentry->d_name.name);
+		__assign_str(auth_domain, key->ex_client->name);
+		__entry->cache = !test_bit(CACHE_NEGATIVE, &key->h.flags);
+	),
+	TP_printk("path=%s domain=%s cache=%s",
+		__get_str(path),
+		__get_str(auth_domain),
+		__entry->cache ? "pos" : "neg"
+	)
+);
+
 DECLARE_EVENT_CLASS(nfsd_io_class,
 	TP_PROTO(struct svc_rqst *rqstp,
 		 struct svc_fh	*fhp,
diff --git a/fs/notify/fanotify/fanotify.c b/fs/notify/fanotify/fanotify.c
index 5778d13..5435a40 100644
--- a/fs/notify/fanotify/fanotify.c
+++ b/fs/notify/fanotify/fanotify.c
@@ -17,6 +17,59 @@
 
 #include "fanotify.h"
 
+static bool fanotify_path_equal(struct path *p1, struct path *p2)
+{
+	return p1->mnt == p2->mnt && p1->dentry == p2->dentry;
+}
+
+static inline bool fanotify_fsid_equal(__kernel_fsid_t *fsid1,
+				       __kernel_fsid_t *fsid2)
+{
+	return fsid1->val[0] == fsid2->val[0] && fsid1->val[1] == fsid2->val[1];
+}
+
+static bool fanotify_fh_equal(struct fanotify_fh *fh1,
+			      struct fanotify_fh *fh2)
+{
+	if (fh1->type != fh2->type || fh1->len != fh2->len)
+		return false;
+
+	/* Do not merge events if we failed to encode fh */
+	if (fh1->type == FILEID_INVALID)
+		return false;
+
+	return !fh1->len ||
+		!memcmp(fanotify_fh_buf(fh1), fanotify_fh_buf(fh2), fh1->len);
+}
+
+static bool fanotify_fid_event_equal(struct fanotify_fid_event *ffe1,
+				     struct fanotify_fid_event *ffe2)
+{
+	/* Do not merge fid events without object fh */
+	if (!ffe1->object_fh.len)
+		return false;
+
+	return fanotify_fsid_equal(&ffe1->fsid, &ffe2->fsid) &&
+		fanotify_fh_equal(&ffe1->object_fh, &ffe2->object_fh);
+}
+
+static bool fanotify_name_event_equal(struct fanotify_name_event *fne1,
+				      struct fanotify_name_event *fne2)
+{
+	/*
+	 * Do not merge name events without dir fh.
+	 * FAN_DIR_MODIFY does not encode object fh, so it may be empty.
+	 */
+	if (!fne1->dir_fh.len)
+		return false;
+
+	if (fne1->name_len != fne2->name_len ||
+	    !fanotify_fh_equal(&fne1->dir_fh, &fne2->dir_fh))
+		return false;
+
+	return !memcmp(fne1->name, fne2->name, fne1->name_len);
+}
+
 static bool should_merge(struct fsnotify_event *old_fsn,
 			 struct fsnotify_event *new_fsn)
 {
@@ -26,14 +79,15 @@ static bool should_merge(struct fsnotify_event *old_fsn,
 	old = FANOTIFY_E(old_fsn);
 	new = FANOTIFY_E(new_fsn);
 
-	if (old_fsn->inode != new_fsn->inode || old->pid != new->pid ||
-	    old->fh_type != new->fh_type || old->fh_len != new->fh_len)
+	if (old_fsn->objectid != new_fsn->objectid ||
+	    old->type != new->type || old->pid != new->pid)
 		return false;
 
-	if (fanotify_event_has_path(old)) {
-		return old->path.mnt == new->path.mnt &&
-			old->path.dentry == new->path.dentry;
-	} else if (fanotify_event_has_fid(old)) {
+	switch (old->type) {
+	case FANOTIFY_EVENT_TYPE_PATH:
+		return fanotify_path_equal(fanotify_event_path(old),
+					   fanotify_event_path(new));
+	case FANOTIFY_EVENT_TYPE_FID:
 		/*
 		 * We want to merge many dirent events in the same dir (i.e.
 		 * creates/unlinks/renames), but we do not want to merge dirent
@@ -42,11 +96,18 @@ static bool should_merge(struct fsnotify_event *old_fsn,
 		 * mask FAN_CREATE|FAN_DELETE|FAN_ONDIR if it describes mkdir+
 		 * unlink pair or rmdir+create pair of events.
 		 */
-		return (old->mask & FS_ISDIR) == (new->mask & FS_ISDIR) &&
-			fanotify_fid_equal(&old->fid, &new->fid, old->fh_len);
+		if ((old->mask & FS_ISDIR) != (new->mask & FS_ISDIR))
+			return false;
+
+		return fanotify_fid_event_equal(FANOTIFY_FE(old),
+						FANOTIFY_FE(new));
+	case FANOTIFY_EVENT_TYPE_FID_NAME:
+		return fanotify_name_event_equal(FANOTIFY_NE(old),
+						 FANOTIFY_NE(new));
+	default:
+		WARN_ON_ONCE(1);
 	}
 
-	/* Do not merge events if we failed to encode fid */
 	return false;
 }
 
@@ -151,7 +212,7 @@ static u32 fanotify_group_event_mask(struct fsnotify_group *group,
 {
 	__u32 marks_mask = 0, marks_ignored_mask = 0;
 	__u32 test_mask, user_mask = FANOTIFY_OUTGOING_EVENTS;
-	const struct path *path = data;
+	const struct path *path = fsnotify_data_path(data, data_type);
 	struct fsnotify_mark *mark;
 	int type;
 
@@ -160,7 +221,7 @@ static u32 fanotify_group_event_mask(struct fsnotify_group *group,
 
 	if (!FAN_GROUP_FLAG(group, FAN_REPORT_FID)) {
 		/* Do we have path to open a file descriptor? */
-		if (data_type != FSNOTIFY_EVENT_PATH)
+		if (!path)
 			return 0;
 		/* Path type events are only relevant for files and dirs */
 		if (!d_is_reg(path->dentry) && !d_can_lookup(path->dentry))
@@ -172,6 +233,13 @@ static u32 fanotify_group_event_mask(struct fsnotify_group *group,
 			continue;
 		mark = iter_info->marks[type];
 		/*
+		 * If the event is on dir and this mark doesn't care about
+		 * events on dir, don't send it!
+		 */
+		if (event_mask & FS_ISDIR && !(mark->mask & FS_ISDIR))
+			continue;
+
+		/*
 		 * If the event is for a child and this mark doesn't care about
 		 * events on a child, don't send it!
 		 */
@@ -187,9 +255,9 @@ static u32 fanotify_group_event_mask(struct fsnotify_group *group,
 	test_mask = event_mask & marks_mask & ~marks_ignored_mask;
 
 	/*
-	 * dirent modification events (create/delete/move) do not carry the
-	 * child entry name/inode information. Instead, we report FAN_ONDIR
-	 * for mkdir/rmdir so user can differentiate them from creat/unlink.
+	 * For dirent modification events (create/delete/move) that do not carry
+	 * the child entry name information, we report FAN_ONDIR for mkdir/rmdir
+	 * so user can differentiate them from creat/unlink.
 	 *
 	 * For backward compatibility and consistency, do not report FAN_ONDIR
 	 * to user in legacy fanotify mode (reporting fd) and report FAN_ONDIR
@@ -203,22 +271,20 @@ static u32 fanotify_group_event_mask(struct fsnotify_group *group,
 		user_mask &= ~FAN_ONDIR;
 	}
 
-	if (event_mask & FS_ISDIR &&
-	    !(marks_mask & FS_ISDIR & ~marks_ignored_mask))
-		return 0;
-
 	return test_mask & user_mask;
 }
 
-static int fanotify_encode_fid(struct fanotify_event *event,
-			       struct inode *inode, gfp_t gfp,
-			       __kernel_fsid_t *fsid)
+static void fanotify_encode_fh(struct fanotify_fh *fh, struct inode *inode,
+			       gfp_t gfp)
 {
-	struct fanotify_fid *fid = &event->fid;
-	int dwords, bytes = 0;
-	int err, type;
+	int dwords, type, bytes = 0;
+	char *ext_buf = NULL;
+	void *buf = fh->buf;
+	int err;
 
-	fid->ext_fh = NULL;
+	if (!inode)
+		goto out;
+
 	dwords = 0;
 	err = -ENOENT;
 	type = exportfs_encode_inode_fh(inode, NULL, &dwords, NULL);
@@ -229,31 +295,33 @@ static int fanotify_encode_fid(struct fanotify_event *event,
 	if (bytes > FANOTIFY_INLINE_FH_LEN) {
 		/* Treat failure to allocate fh as failure to allocate event */
 		err = -ENOMEM;
-		fid->ext_fh = kmalloc(bytes, gfp);
-		if (!fid->ext_fh)
+		ext_buf = kmalloc(bytes, gfp);
+		if (!ext_buf)
 			goto out_err;
+
+		*fanotify_fh_ext_buf_ptr(fh) = ext_buf;
+		buf = ext_buf;
 	}
 
-	type = exportfs_encode_inode_fh(inode, fanotify_fid_fh(fid, bytes),
-					&dwords, NULL);
+	type = exportfs_encode_inode_fh(inode, buf, &dwords, NULL);
 	err = -EINVAL;
 	if (!type || type == FILEID_INVALID || bytes != dwords << 2)
 		goto out_err;
 
-	fid->fsid = *fsid;
-	event->fh_len = bytes;
+	fh->type = type;
+	fh->len = bytes;
 
-	return type;
+	return;
 
 out_err:
-	pr_warn_ratelimited("fanotify: failed to encode fid (fsid=%x.%x, "
-			    "type=%d, bytes=%d, err=%i)\n",
-			    fsid->val[0], fsid->val[1], type, bytes, err);
-	kfree(fid->ext_fh);
-	fid->ext_fh = NULL;
-	event->fh_len = 0;
-
-	return FILEID_INVALID;
+	pr_warn_ratelimited("fanotify: failed to encode fid (type=%d, len=%d, err=%i)\n",
+			    type, bytes, err);
+	kfree(ext_buf);
+	*fanotify_fh_ext_buf_ptr(fh) = NULL;
+out:
+	/* Report the event without a file identifier on encode error */
+	fh->type = FILEID_INVALID;
+	fh->len = 0;
 }
 
 /*
@@ -269,21 +337,22 @@ static struct inode *fanotify_fid_inode(struct inode *to_tell, u32 event_mask,
 {
 	if (event_mask & ALL_FSNOTIFY_DIRENT_EVENTS)
 		return to_tell;
-	else if (data_type == FSNOTIFY_EVENT_INODE)
-		return (struct inode *)data;
-	else if (data_type == FSNOTIFY_EVENT_PATH)
-		return d_inode(((struct path *)data)->dentry);
-	return NULL;
+
+	return (struct inode *)fsnotify_data_inode(data, data_type);
 }
 
 struct fanotify_event *fanotify_alloc_event(struct fsnotify_group *group,
 					    struct inode *inode, u32 mask,
 					    const void *data, int data_type,
+					    const struct qstr *file_name,
 					    __kernel_fsid_t *fsid)
 {
 	struct fanotify_event *event = NULL;
+	struct fanotify_fid_event *ffe = NULL;
+	struct fanotify_name_event *fne = NULL;
 	gfp_t gfp = GFP_KERNEL_ACCOUNT;
 	struct inode *id = fanotify_fid_inode(inode, mask, data, data_type);
+	const struct path *path = fsnotify_data_path(data, data_type);
 
 	/*
 	 * For queues with unlimited length lost events are not expected and
@@ -305,33 +374,81 @@ struct fanotify_event *fanotify_alloc_event(struct fsnotify_group *group,
 		pevent = kmem_cache_alloc(fanotify_perm_event_cachep, gfp);
 		if (!pevent)
 			goto out;
+
 		event = &pevent->fae;
+		event->type = FANOTIFY_EVENT_TYPE_PATH_PERM;
 		pevent->response = 0;
 		pevent->state = FAN_EVENT_INIT;
 		goto init;
 	}
-	event = kmem_cache_alloc(fanotify_event_cachep, gfp);
-	if (!event)
-		goto out;
-init: __maybe_unused
-	fsnotify_init_event(&event->fse, inode);
+
+	/*
+	 * For FAN_DIR_MODIFY event, we report the fid of the directory and
+	 * the name of the modified entry.
+	 * Allocate an fanotify_name_event struct and copy the name.
+	 */
+	if (mask & FAN_DIR_MODIFY && !(WARN_ON_ONCE(!file_name))) {
+		fne = kmalloc(sizeof(*fne) + file_name->len + 1, gfp);
+		if (!fne)
+			goto out;
+
+		event = &fne->fae;
+		event->type = FANOTIFY_EVENT_TYPE_FID_NAME;
+		fne->name_len = file_name->len;
+		strcpy(fne->name, file_name->name);
+		goto init;
+	}
+
+	if (FAN_GROUP_FLAG(group, FAN_REPORT_FID)) {
+		ffe = kmem_cache_alloc(fanotify_fid_event_cachep, gfp);
+		if (!ffe)
+			goto out;
+
+		event = &ffe->fae;
+		event->type = FANOTIFY_EVENT_TYPE_FID;
+	} else {
+		struct fanotify_path_event *pevent;
+
+		pevent = kmem_cache_alloc(fanotify_path_event_cachep, gfp);
+		if (!pevent)
+			goto out;
+
+		event = &pevent->fae;
+		event->type = FANOTIFY_EVENT_TYPE_PATH;
+	}
+
+init:
+	/*
+	 * Use the victim inode instead of the watching inode as the id for
+	 * event queue, so event reported on parent is merged with event
+	 * reported on child when both directory and child watches exist.
+	 */
+	fsnotify_init_event(&event->fse, (unsigned long)id);
 	event->mask = mask;
 	if (FAN_GROUP_FLAG(group, FAN_REPORT_TID))
 		event->pid = get_pid(task_pid(current));
 	else
 		event->pid = get_pid(task_tgid(current));
-	event->fh_len = 0;
-	if (id && FAN_GROUP_FLAG(group, FAN_REPORT_FID)) {
-		/* Report the event without a file identifier on encode error */
-		event->fh_type = fanotify_encode_fid(event, id, gfp, fsid);
-	} else if (data_type == FSNOTIFY_EVENT_PATH) {
-		event->fh_type = FILEID_ROOT;
-		event->path = *((struct path *)data);
-		path_get(&event->path);
-	} else {
-		event->fh_type = FILEID_INVALID;
-		event->path.mnt = NULL;
-		event->path.dentry = NULL;
+
+	if (fsid && fanotify_event_fsid(event))
+		*fanotify_event_fsid(event) = *fsid;
+
+	if (fanotify_event_object_fh(event))
+		fanotify_encode_fh(fanotify_event_object_fh(event), id, gfp);
+
+	if (fanotify_event_dir_fh(event))
+		fanotify_encode_fh(fanotify_event_dir_fh(event), id, gfp);
+
+	if (fanotify_event_has_path(event)) {
+		struct path *p = fanotify_event_path(event);
+
+		if (path) {
+			*p = *path;
+			path_get(path);
+		} else {
+			p->mnt = NULL;
+			p->dentry = NULL;
+		}
 	}
 out:
 	memalloc_unuse_memcg();
@@ -392,6 +509,7 @@ static int fanotify_handle_event(struct fsnotify_group *group,
 	BUILD_BUG_ON(FAN_MOVED_FROM != FS_MOVED_FROM);
 	BUILD_BUG_ON(FAN_CREATE != FS_CREATE);
 	BUILD_BUG_ON(FAN_DELETE != FS_DELETE);
+	BUILD_BUG_ON(FAN_DIR_MODIFY != FS_DIR_MODIFY);
 	BUILD_BUG_ON(FAN_DELETE_SELF != FS_DELETE_SELF);
 	BUILD_BUG_ON(FAN_MOVE_SELF != FS_MOVE_SELF);
 	BUILD_BUG_ON(FAN_EVENT_ON_CHILD != FS_EVENT_ON_CHILD);
@@ -402,7 +520,7 @@ static int fanotify_handle_event(struct fsnotify_group *group,
 	BUILD_BUG_ON(FAN_OPEN_EXEC != FS_OPEN_EXEC);
 	BUILD_BUG_ON(FAN_OPEN_EXEC_PERM != FS_OPEN_EXEC_PERM);
 
-	BUILD_BUG_ON(HWEIGHT32(ALL_FANOTIFY_EVENT_BITS) != 19);
+	BUILD_BUG_ON(HWEIGHT32(ALL_FANOTIFY_EVENT_BITS) != 20);
 
 	mask = fanotify_group_event_mask(group, iter_info, mask, data,
 					 data_type);
@@ -429,7 +547,7 @@ static int fanotify_handle_event(struct fsnotify_group *group,
 	}
 
 	event = fanotify_alloc_event(group, inode, mask, data, data_type,
-				     &fsid);
+				     file_name, &fsid);
 	ret = -ENOMEM;
 	if (unlikely(!event)) {
 		/*
@@ -451,7 +569,7 @@ static int fanotify_handle_event(struct fsnotify_group *group,
 
 		ret = 0;
 	} else if (fanotify_is_perm_event(mask)) {
-		ret = fanotify_get_response(group, FANOTIFY_PE(fsn_event),
+		ret = fanotify_get_response(group, FANOTIFY_PERM(event),
 					    iter_info);
 	}
 finish:
@@ -470,22 +588,58 @@ static void fanotify_free_group_priv(struct fsnotify_group *group)
 	free_uid(user);
 }
 
+static void fanotify_free_path_event(struct fanotify_event *event)
+{
+	path_put(fanotify_event_path(event));
+	kmem_cache_free(fanotify_path_event_cachep, FANOTIFY_PE(event));
+}
+
+static void fanotify_free_perm_event(struct fanotify_event *event)
+{
+	path_put(fanotify_event_path(event));
+	kmem_cache_free(fanotify_perm_event_cachep, FANOTIFY_PERM(event));
+}
+
+static void fanotify_free_fid_event(struct fanotify_event *event)
+{
+	struct fanotify_fid_event *ffe = FANOTIFY_FE(event);
+
+	if (fanotify_fh_has_ext_buf(&ffe->object_fh))
+		kfree(fanotify_fh_ext_buf(&ffe->object_fh));
+	kmem_cache_free(fanotify_fid_event_cachep, ffe);
+}
+
+static void fanotify_free_name_event(struct fanotify_event *event)
+{
+	struct fanotify_name_event *fne = FANOTIFY_NE(event);
+
+	if (fanotify_fh_has_ext_buf(&fne->dir_fh))
+		kfree(fanotify_fh_ext_buf(&fne->dir_fh));
+	kfree(fne);
+}
+
 static void fanotify_free_event(struct fsnotify_event *fsn_event)
 {
 	struct fanotify_event *event;
 
 	event = FANOTIFY_E(fsn_event);
-	if (fanotify_event_has_path(event))
-		path_put(&event->path);
-	else if (fanotify_event_has_ext_fh(event))
-		kfree(event->fid.ext_fh);
 	put_pid(event->pid);
-	if (fanotify_is_perm_event(event->mask)) {
-		kmem_cache_free(fanotify_perm_event_cachep,
-				FANOTIFY_PE(fsn_event));
-		return;
+	switch (event->type) {
+	case FANOTIFY_EVENT_TYPE_PATH:
+		fanotify_free_path_event(event);
+		break;
+	case FANOTIFY_EVENT_TYPE_PATH_PERM:
+		fanotify_free_perm_event(event);
+		break;
+	case FANOTIFY_EVENT_TYPE_FID:
+		fanotify_free_fid_event(event);
+		break;
+	case FANOTIFY_EVENT_TYPE_FID_NAME:
+		fanotify_free_name_event(event);
+		break;
+	default:
+		WARN_ON_ONCE(1);
 	}
-	kmem_cache_free(fanotify_event_cachep, event);
 }
 
 static void fanotify_free_mark(struct fsnotify_mark *fsn_mark)
diff --git a/fs/notify/fanotify/fanotify.h b/fs/notify/fanotify/fanotify.h
index 68b3050..35bfbf4 100644
--- a/fs/notify/fanotify/fanotify.h
+++ b/fs/notify/fanotify/fanotify.h
@@ -5,7 +5,8 @@
 #include <linux/exportfs.h>
 
 extern struct kmem_cache *fanotify_mark_cache;
-extern struct kmem_cache *fanotify_event_cachep;
+extern struct kmem_cache *fanotify_fid_event_cachep;
+extern struct kmem_cache *fanotify_path_event_cachep;
 extern struct kmem_cache *fanotify_perm_event_cachep;
 
 /* Possible states of the permission event */
@@ -18,94 +19,140 @@ enum {
 
 /*
  * 3 dwords are sufficient for most local fs (64bit ino, 32bit generation).
- * For 32bit arch, fid increases the size of fanotify_event by 12 bytes and
- * fh_* fields increase the size of fanotify_event by another 4 bytes.
- * For 64bit arch, fid increases the size of fanotify_fid by 8 bytes and
- * fh_* fields are packed in a hole after mask.
+ * fh buf should be dword aligned. On 64bit arch, the ext_buf pointer is
+ * stored in either the first or last 2 dwords.
  */
-#if BITS_PER_LONG == 32
 #define FANOTIFY_INLINE_FH_LEN	(3 << 2)
-#else
-#define FANOTIFY_INLINE_FH_LEN	(4 << 2)
-#endif
 
-struct fanotify_fid {
-	__kernel_fsid_t fsid;
-	union {
-		unsigned char fh[FANOTIFY_INLINE_FH_LEN];
-		unsigned char *ext_fh;
-	};
-};
+struct fanotify_fh {
+	unsigned char buf[FANOTIFY_INLINE_FH_LEN];
+	u8 type;
+	u8 len;
+} __aligned(4);
 
-static inline void *fanotify_fid_fh(struct fanotify_fid *fid,
-				    unsigned int fh_len)
+static inline bool fanotify_fh_has_ext_buf(struct fanotify_fh *fh)
 {
-	return fh_len <= FANOTIFY_INLINE_FH_LEN ? fid->fh : fid->ext_fh;
+	return fh->len > FANOTIFY_INLINE_FH_LEN;
 }
 
-static inline bool fanotify_fid_equal(struct fanotify_fid *fid1,
-				      struct fanotify_fid *fid2,
-				      unsigned int fh_len)
+static inline char **fanotify_fh_ext_buf_ptr(struct fanotify_fh *fh)
 {
-	return fid1->fsid.val[0] == fid2->fsid.val[0] &&
-		fid1->fsid.val[1] == fid2->fsid.val[1] &&
-		!memcmp(fanotify_fid_fh(fid1, fh_len),
-			fanotify_fid_fh(fid2, fh_len), fh_len);
+	BUILD_BUG_ON(__alignof__(char *) - 4 + sizeof(char *) >
+		     FANOTIFY_INLINE_FH_LEN);
+	return (char **)ALIGN((unsigned long)(fh->buf), __alignof__(char *));
+}
+
+static inline void *fanotify_fh_ext_buf(struct fanotify_fh *fh)
+{
+	return *fanotify_fh_ext_buf_ptr(fh);
+}
+
+static inline void *fanotify_fh_buf(struct fanotify_fh *fh)
+{
+	return fanotify_fh_has_ext_buf(fh) ? fanotify_fh_ext_buf(fh) : fh->buf;
 }
 
 /*
- * Structure for normal fanotify events. It gets allocated in
+ * Common structure for fanotify events. Concrete structs are allocated in
  * fanotify_handle_event() and freed when the information is retrieved by
- * userspace
+ * userspace. The type of event determines how it was allocated, how it will
+ * be freed and which concrete struct it may be cast to.
  */
+enum fanotify_event_type {
+	FANOTIFY_EVENT_TYPE_FID, /* fixed length */
+	FANOTIFY_EVENT_TYPE_FID_NAME, /* variable length */
+	FANOTIFY_EVENT_TYPE_PATH,
+	FANOTIFY_EVENT_TYPE_PATH_PERM,
+};
+
 struct fanotify_event {
 	struct fsnotify_event fse;
 	u32 mask;
-	/*
-	 * Those fields are outside fanotify_fid to pack fanotify_event nicely
-	 * on 64bit arch and to use fh_type as an indication of whether path
-	 * or fid are used in the union:
-	 * FILEID_ROOT (0) for path, > 0 for fid, FILEID_INVALID for neither.
-	 */
-	u8 fh_type;
-	u8 fh_len;
-	u16 pad;
-	union {
-		/*
-		 * We hold ref to this path so it may be dereferenced at any
-		 * point during this object's lifetime
-		 */
-		struct path path;
-		/*
-		 * With FAN_REPORT_FID, we do not hold any reference on the
-		 * victim object. Instead we store its NFS file handle and its
-		 * filesystem's fsid as a unique identifier.
-		 */
-		struct fanotify_fid fid;
-	};
+	enum fanotify_event_type type;
 	struct pid *pid;
 };
 
-static inline bool fanotify_event_has_path(struct fanotify_event *event)
+struct fanotify_fid_event {
+	struct fanotify_event fae;
+	__kernel_fsid_t fsid;
+	struct fanotify_fh object_fh;
+};
+
+static inline struct fanotify_fid_event *
+FANOTIFY_FE(struct fanotify_event *event)
 {
-	return event->fh_type == FILEID_ROOT;
+	return container_of(event, struct fanotify_fid_event, fae);
 }
 
-static inline bool fanotify_event_has_fid(struct fanotify_event *event)
+struct fanotify_name_event {
+	struct fanotify_event fae;
+	__kernel_fsid_t fsid;
+	struct fanotify_fh dir_fh;
+	u8 name_len;
+	char name[0];
+};
+
+static inline struct fanotify_name_event *
+FANOTIFY_NE(struct fanotify_event *event)
 {
-	return event->fh_type != FILEID_ROOT &&
-		event->fh_type != FILEID_INVALID;
+	return container_of(event, struct fanotify_name_event, fae);
 }
 
-static inline bool fanotify_event_has_ext_fh(struct fanotify_event *event)
+static inline __kernel_fsid_t *fanotify_event_fsid(struct fanotify_event *event)
 {
-	return fanotify_event_has_fid(event) &&
-		event->fh_len > FANOTIFY_INLINE_FH_LEN;
+	if (event->type == FANOTIFY_EVENT_TYPE_FID)
+		return &FANOTIFY_FE(event)->fsid;
+	else if (event->type == FANOTIFY_EVENT_TYPE_FID_NAME)
+		return &FANOTIFY_NE(event)->fsid;
+	else
+		return NULL;
 }
 
-static inline void *fanotify_event_fh(struct fanotify_event *event)
+static inline struct fanotify_fh *fanotify_event_object_fh(
+						struct fanotify_event *event)
 {
-	return fanotify_fid_fh(&event->fid, event->fh_len);
+	if (event->type == FANOTIFY_EVENT_TYPE_FID)
+		return &FANOTIFY_FE(event)->object_fh;
+	else
+		return NULL;
+}
+
+static inline struct fanotify_fh *fanotify_event_dir_fh(
+						struct fanotify_event *event)
+{
+	if (event->type == FANOTIFY_EVENT_TYPE_FID_NAME)
+		return &FANOTIFY_NE(event)->dir_fh;
+	else
+		return NULL;
+}
+
+static inline int fanotify_event_object_fh_len(struct fanotify_event *event)
+{
+	struct fanotify_fh *fh = fanotify_event_object_fh(event);
+
+	return fh ? fh->len : 0;
+}
+
+static inline bool fanotify_event_has_name(struct fanotify_event *event)
+{
+	return event->type == FANOTIFY_EVENT_TYPE_FID_NAME;
+}
+
+static inline int fanotify_event_name_len(struct fanotify_event *event)
+{
+	return fanotify_event_has_name(event) ?
+		FANOTIFY_NE(event)->name_len : 0;
+}
+
+struct fanotify_path_event {
+	struct fanotify_event fae;
+	struct path path;
+};
+
+static inline struct fanotify_path_event *
+FANOTIFY_PE(struct fanotify_event *event)
+{
+	return container_of(event, struct fanotify_path_event, fae);
 }
 
 /*
@@ -117,15 +164,16 @@ static inline void *fanotify_event_fh(struct fanotify_event *event)
  */
 struct fanotify_perm_event {
 	struct fanotify_event fae;
+	struct path path;
 	unsigned short response;	/* userspace answer to the event */
 	unsigned short state;		/* state of the event */
 	int fd;		/* fd we passed to userspace for this event */
 };
 
 static inline struct fanotify_perm_event *
-FANOTIFY_PE(struct fsnotify_event *fse)
+FANOTIFY_PERM(struct fanotify_event *event)
 {
-	return container_of(fse, struct fanotify_perm_event, fae.fse);
+	return container_of(event, struct fanotify_perm_event, fae);
 }
 
 static inline bool fanotify_is_perm_event(u32 mask)
@@ -139,7 +187,24 @@ static inline struct fanotify_event *FANOTIFY_E(struct fsnotify_event *fse)
 	return container_of(fse, struct fanotify_event, fse);
 }
 
+static inline bool fanotify_event_has_path(struct fanotify_event *event)
+{
+	return event->type == FANOTIFY_EVENT_TYPE_PATH ||
+		event->type == FANOTIFY_EVENT_TYPE_PATH_PERM;
+}
+
+static inline struct path *fanotify_event_path(struct fanotify_event *event)
+{
+	if (event->type == FANOTIFY_EVENT_TYPE_PATH)
+		return &FANOTIFY_PE(event)->path;
+	else if (event->type == FANOTIFY_EVENT_TYPE_PATH_PERM)
+		return &FANOTIFY_PERM(event)->path;
+	else
+		return NULL;
+}
+
 struct fanotify_event *fanotify_alloc_event(struct fsnotify_group *group,
 					    struct inode *inode, u32 mask,
 					    const void *data, int data_type,
+					    const struct qstr *file_name,
 					    __kernel_fsid_t *fsid);
diff --git a/fs/notify/fanotify/fanotify_user.c b/fs/notify/fanotify/fanotify_user.c
index 0aa362b..42cb794 100644
--- a/fs/notify/fanotify/fanotify_user.c
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -46,32 +46,53 @@
 extern const struct fsnotify_ops fanotify_fsnotify_ops;
 
 struct kmem_cache *fanotify_mark_cache __read_mostly;
-struct kmem_cache *fanotify_event_cachep __read_mostly;
+struct kmem_cache *fanotify_fid_event_cachep __read_mostly;
+struct kmem_cache *fanotify_path_event_cachep __read_mostly;
 struct kmem_cache *fanotify_perm_event_cachep __read_mostly;
 
 #define FANOTIFY_EVENT_ALIGN 4
+#define FANOTIFY_INFO_HDR_LEN \
+	(sizeof(struct fanotify_event_info_fid) + sizeof(struct file_handle))
+
+static int fanotify_fid_info_len(int fh_len, int name_len)
+{
+	int info_len = fh_len;
+
+	if (name_len)
+		info_len += name_len + 1;
+
+	return roundup(FANOTIFY_INFO_HDR_LEN + info_len, FANOTIFY_EVENT_ALIGN);
+}
 
 static int fanotify_event_info_len(struct fanotify_event *event)
 {
-	if (!fanotify_event_has_fid(event))
-		return 0;
+	int info_len = 0;
+	int fh_len = fanotify_event_object_fh_len(event);
 
-	return roundup(sizeof(struct fanotify_event_info_fid) +
-		       sizeof(struct file_handle) + event->fh_len,
-		       FANOTIFY_EVENT_ALIGN);
+	if (fh_len)
+		info_len += fanotify_fid_info_len(fh_len, 0);
+
+	if (fanotify_event_name_len(event)) {
+		struct fanotify_name_event *fne = FANOTIFY_NE(event);
+
+		info_len += fanotify_fid_info_len(fne->dir_fh.len,
+						  fne->name_len);
+	}
+
+	return info_len;
 }
 
 /*
- * Get an fsnotify notification event if one exists and is small
+ * Get an fanotify notification event if one exists and is small
  * enough to fit in "count". Return an error pointer if the count
  * is not large enough. When permission event is dequeued, its state is
  * updated accordingly.
  */
-static struct fsnotify_event *get_one_event(struct fsnotify_group *group,
+static struct fanotify_event *get_one_event(struct fsnotify_group *group,
 					    size_t count)
 {
 	size_t event_size = FAN_EVENT_METADATA_LEN;
-	struct fsnotify_event *fsn_event = NULL;
+	struct fanotify_event *event = NULL;
 
 	pr_debug("%s: group=%p count=%zd\n", __func__, group, count);
 
@@ -85,26 +106,23 @@ static struct fsnotify_event *get_one_event(struct fsnotify_group *group,
 	}
 
 	if (event_size > count) {
-		fsn_event = ERR_PTR(-EINVAL);
+		event = ERR_PTR(-EINVAL);
 		goto out;
 	}
-	fsn_event = fsnotify_remove_first_event(group);
-	if (fanotify_is_perm_event(FANOTIFY_E(fsn_event)->mask))
-		FANOTIFY_PE(fsn_event)->state = FAN_EVENT_REPORTED;
+	event = FANOTIFY_E(fsnotify_remove_first_event(group));
+	if (fanotify_is_perm_event(event->mask))
+		FANOTIFY_PERM(event)->state = FAN_EVENT_REPORTED;
 out:
 	spin_unlock(&group->notification_lock);
-	return fsn_event;
+	return event;
 }
 
-static int create_fd(struct fsnotify_group *group,
-		     struct fanotify_event *event,
+static int create_fd(struct fsnotify_group *group, struct path *path,
 		     struct file **file)
 {
 	int client_fd;
 	struct file *new_file;
 
-	pr_debug("%s: group=%p event=%p\n", __func__, group, event);
-
 	client_fd = get_unused_fd_flags(group->fanotify_data.f_flags);
 	if (client_fd < 0)
 		return client_fd;
@@ -113,14 +131,9 @@ static int create_fd(struct fsnotify_group *group,
 	 * we need a new file handle for the userspace program so it can read even if it was
 	 * originally opened O_WRONLY.
 	 */
-	/* it's possible this event was an overflow event.  in that case dentry and mnt
-	 * are NULL;  That's fine, just don't call dentry open */
-	if (event->path.dentry && event->path.mnt)
-		new_file = dentry_open(&event->path,
-				       group->fanotify_data.f_flags | FMODE_NONOTIFY,
-				       current_cred());
-	else
-		new_file = ERR_PTR(-EOVERFLOW);
+	new_file = dentry_open(path,
+			       group->fanotify_data.f_flags | FMODE_NONOTIFY,
+			       current_cred());
 	if (IS_ERR(new_file)) {
 		/*
 		 * we still send an event even if we can't open the file.  this
@@ -204,83 +217,111 @@ static int process_access_response(struct fsnotify_group *group,
 	return -ENOENT;
 }
 
-static int copy_fid_to_user(struct fanotify_event *event, char __user *buf)
+static int copy_info_to_user(__kernel_fsid_t *fsid, struct fanotify_fh *fh,
+			     const char *name, size_t name_len,
+			     char __user *buf, size_t count)
 {
 	struct fanotify_event_info_fid info = { };
 	struct file_handle handle = { };
-	unsigned char bounce[FANOTIFY_INLINE_FH_LEN], *fh;
-	size_t fh_len = event->fh_len;
-	size_t len = fanotify_event_info_len(event);
+	unsigned char bounce[FANOTIFY_INLINE_FH_LEN], *fh_buf;
+	size_t fh_len = fh ? fh->len : 0;
+	size_t info_len = fanotify_fid_info_len(fh_len, name_len);
+	size_t len = info_len;
 
-	if (!len)
+	pr_debug("%s: fh_len=%zu name_len=%zu, info_len=%zu, count=%zu\n",
+		 __func__, fh_len, name_len, info_len, count);
+
+	if (!fh_len || (name && !name_len))
 		return 0;
 
-	if (WARN_ON_ONCE(len < sizeof(info) + sizeof(handle) + fh_len))
+	if (WARN_ON_ONCE(len < sizeof(info) || len > count))
 		return -EFAULT;
 
-	/* Copy event info fid header followed by vaiable sized file handle */
-	info.hdr.info_type = FAN_EVENT_INFO_TYPE_FID;
+	/*
+	 * Copy event info fid header followed by variable sized file handle
+	 * and optionally followed by variable sized filename.
+	 */
+	info.hdr.info_type = name_len ? FAN_EVENT_INFO_TYPE_DFID_NAME :
+					FAN_EVENT_INFO_TYPE_FID;
 	info.hdr.len = len;
-	info.fsid = event->fid.fsid;
+	info.fsid = *fsid;
 	if (copy_to_user(buf, &info, sizeof(info)))
 		return -EFAULT;
 
 	buf += sizeof(info);
 	len -= sizeof(info);
-	handle.handle_type = event->fh_type;
+	if (WARN_ON_ONCE(len < sizeof(handle)))
+		return -EFAULT;
+
+	handle.handle_type = fh->type;
 	handle.handle_bytes = fh_len;
 	if (copy_to_user(buf, &handle, sizeof(handle)))
 		return -EFAULT;
 
 	buf += sizeof(handle);
 	len -= sizeof(handle);
-	/*
-	 * For an inline fh, copy through stack to exclude the copy from
-	 * usercopy hardening protections.
-	 */
-	fh = fanotify_event_fh(event);
-	if (fh_len <= FANOTIFY_INLINE_FH_LEN) {
-		memcpy(bounce, fh, fh_len);
-		fh = bounce;
-	}
-	if (copy_to_user(buf, fh, fh_len))
+	if (WARN_ON_ONCE(len < fh_len))
 		return -EFAULT;
 
-	/* Pad with 0's */
+	/*
+	 * For an inline fh and inline file name, copy through stack to exclude
+	 * the copy from usercopy hardening protections.
+	 */
+	fh_buf = fanotify_fh_buf(fh);
+	if (fh_len <= FANOTIFY_INLINE_FH_LEN) {
+		memcpy(bounce, fh_buf, fh_len);
+		fh_buf = bounce;
+	}
+	if (copy_to_user(buf, fh_buf, fh_len))
+		return -EFAULT;
+
 	buf += fh_len;
 	len -= fh_len;
+
+	if (name_len) {
+		/* Copy the filename with terminating null */
+		name_len++;
+		if (WARN_ON_ONCE(len < name_len))
+			return -EFAULT;
+
+		if (copy_to_user(buf, name, name_len))
+			return -EFAULT;
+
+		buf += name_len;
+		len -= name_len;
+	}
+
+	/* Pad with 0's */
 	WARN_ON_ONCE(len < 0 || len >= FANOTIFY_EVENT_ALIGN);
 	if (len > 0 && clear_user(buf, len))
 		return -EFAULT;
 
-	return 0;
+	return info_len;
 }
 
 static ssize_t copy_event_to_user(struct fsnotify_group *group,
-				  struct fsnotify_event *fsn_event,
+				  struct fanotify_event *event,
 				  char __user *buf, size_t count)
 {
 	struct fanotify_event_metadata metadata;
-	struct fanotify_event *event;
+	struct path *path = fanotify_event_path(event);
 	struct file *f = NULL;
 	int ret, fd = FAN_NOFD;
 
-	pr_debug("%s: group=%p event=%p\n", __func__, group, fsn_event);
+	pr_debug("%s: group=%p event=%p\n", __func__, group, event);
 
-	event = container_of(fsn_event, struct fanotify_event, fse);
-	metadata.event_len = FAN_EVENT_METADATA_LEN;
+	metadata.event_len = FAN_EVENT_METADATA_LEN +
+					fanotify_event_info_len(event);
 	metadata.metadata_len = FAN_EVENT_METADATA_LEN;
 	metadata.vers = FANOTIFY_METADATA_VERSION;
 	metadata.reserved = 0;
 	metadata.mask = event->mask & FANOTIFY_OUTGOING_EVENTS;
 	metadata.pid = pid_vnr(event->pid);
 
-	if (fanotify_event_has_path(event)) {
-		fd = create_fd(group, event, &f);
+	if (path && path->mnt && path->dentry) {
+		fd = create_fd(group, path, &f);
 		if (fd < 0)
 			return fd;
-	} else if (fanotify_event_has_fid(event)) {
-		metadata.event_len += fanotify_event_info_len(event);
 	}
 	metadata.fd = fd;
 
@@ -295,15 +336,39 @@ static ssize_t copy_event_to_user(struct fsnotify_group *group,
 	if (copy_to_user(buf, &metadata, FAN_EVENT_METADATA_LEN))
 		goto out_close_fd;
 
-	if (fanotify_is_perm_event(event->mask))
-		FANOTIFY_PE(fsn_event)->fd = fd;
+	buf += FAN_EVENT_METADATA_LEN;
+	count -= FAN_EVENT_METADATA_LEN;
 
-	if (fanotify_event_has_path(event)) {
+	if (fanotify_is_perm_event(event->mask))
+		FANOTIFY_PERM(event)->fd = fd;
+
+	if (f)
 		fd_install(fd, f);
-	} else if (fanotify_event_has_fid(event)) {
-		ret = copy_fid_to_user(event, buf + FAN_EVENT_METADATA_LEN);
+
+	/* Event info records order is: dir fid + name, child fid */
+	if (fanotify_event_name_len(event)) {
+		struct fanotify_name_event *fne = FANOTIFY_NE(event);
+
+		ret = copy_info_to_user(fanotify_event_fsid(event),
+					fanotify_event_dir_fh(event),
+					fne->name, fne->name_len,
+					buf, count);
 		if (ret < 0)
 			return ret;
+
+		buf += ret;
+		count -= ret;
+	}
+
+	if (fanotify_event_object_fh_len(event)) {
+		ret = copy_info_to_user(fanotify_event_fsid(event),
+					fanotify_event_object_fh(event),
+					NULL, 0, buf, count);
+		if (ret < 0)
+			return ret;
+
+		buf += ret;
+		count -= ret;
 	}
 
 	return metadata.event_len;
@@ -335,7 +400,7 @@ static ssize_t fanotify_read(struct file *file, char __user *buf,
 			     size_t count, loff_t *pos)
 {
 	struct fsnotify_group *group;
-	struct fsnotify_event *kevent;
+	struct fanotify_event *event;
 	char __user *start;
 	int ret;
 	DEFINE_WAIT_FUNC(wait, woken_wake_function);
@@ -347,13 +412,13 @@ static ssize_t fanotify_read(struct file *file, char __user *buf,
 
 	add_wait_queue(&group->notification_waitq, &wait);
 	while (1) {
-		kevent = get_one_event(group, count);
-		if (IS_ERR(kevent)) {
-			ret = PTR_ERR(kevent);
+		event = get_one_event(group, count);
+		if (IS_ERR(event)) {
+			ret = PTR_ERR(event);
 			break;
 		}
 
-		if (!kevent) {
+		if (!event) {
 			ret = -EAGAIN;
 			if (file->f_flags & O_NONBLOCK)
 				break;
@@ -369,7 +434,7 @@ static ssize_t fanotify_read(struct file *file, char __user *buf,
 			continue;
 		}
 
-		ret = copy_event_to_user(group, kevent, buf, count);
+		ret = copy_event_to_user(group, event, buf, count);
 		if (unlikely(ret == -EOPENSTALE)) {
 			/*
 			 * We cannot report events with stale fd so drop it.
@@ -384,17 +449,17 @@ static ssize_t fanotify_read(struct file *file, char __user *buf,
 		 * Permission events get queued to wait for response.  Other
 		 * events can be destroyed now.
 		 */
-		if (!fanotify_is_perm_event(FANOTIFY_E(kevent)->mask)) {
-			fsnotify_destroy_event(group, kevent);
+		if (!fanotify_is_perm_event(event->mask)) {
+			fsnotify_destroy_event(group, &event->fse);
 		} else {
 			if (ret <= 0) {
 				spin_lock(&group->notification_lock);
 				finish_permission_event(group,
-					FANOTIFY_PE(kevent), FAN_DENY);
+					FANOTIFY_PERM(event), FAN_DENY);
 				wake_up(&group->fanotify_data.access_waitq);
 			} else {
 				spin_lock(&group->notification_lock);
-				list_add_tail(&kevent->list,
+				list_add_tail(&event->fse.list,
 					&group->fanotify_data.access_list);
 				spin_unlock(&group->notification_lock);
 			}
@@ -440,8 +505,6 @@ static ssize_t fanotify_write(struct file *file, const char __user *buf, size_t
 static int fanotify_release(struct inode *ignored, struct file *file)
 {
 	struct fsnotify_group *group = file->private_data;
-	struct fanotify_perm_event *event;
-	struct fsnotify_event *fsn_event;
 
 	/*
 	 * Stop new events from arriving in the notification queue. since
@@ -456,6 +519,8 @@ static int fanotify_release(struct inode *ignored, struct file *file)
 	 */
 	spin_lock(&group->notification_lock);
 	while (!list_empty(&group->fanotify_data.access_list)) {
+		struct fanotify_perm_event *event;
+
 		event = list_first_entry(&group->fanotify_data.access_list,
 				struct fanotify_perm_event, fae.fse.list);
 		list_del_init(&event->fae.fse.list);
@@ -469,12 +534,14 @@ static int fanotify_release(struct inode *ignored, struct file *file)
 	 * response is consumed and fanotify_get_response() returns.
 	 */
 	while (!fsnotify_notify_queue_is_empty(group)) {
-		fsn_event = fsnotify_remove_first_event(group);
-		if (!(FANOTIFY_E(fsn_event)->mask & FANOTIFY_PERM_EVENTS)) {
+		struct fanotify_event *event;
+
+		event = FANOTIFY_E(fsnotify_remove_first_event(group));
+		if (!(event->mask & FANOTIFY_PERM_EVENTS)) {
 			spin_unlock(&group->notification_lock);
-			fsnotify_destroy_event(group, fsn_event);
+			fsnotify_destroy_event(group, &event->fse);
 		} else {
-			finish_permission_event(group, FANOTIFY_PE(fsn_event),
+			finish_permission_event(group, FANOTIFY_PERM(event),
 						FAN_ALLOW);
 		}
 		spin_lock(&group->notification_lock);
@@ -824,7 +891,7 @@ SYSCALL_DEFINE2(fanotify_init, unsigned int, flags, unsigned int, event_f_flags)
 	group->memcg = get_mem_cgroup_from_mm(current->mm);
 
 	oevent = fanotify_alloc_event(group, NULL, FS_Q_OVERFLOW, NULL,
-				      FSNOTIFY_EVENT_NONE, NULL);
+				      FSNOTIFY_EVENT_NONE, NULL, NULL);
 	if (unlikely(!oevent)) {
 		fd = -ENOMEM;
 		goto out_destroy_group;
@@ -1139,7 +1206,10 @@ static int __init fanotify_user_setup(void)
 
 	fanotify_mark_cache = KMEM_CACHE(fsnotify_mark,
 					 SLAB_PANIC|SLAB_ACCOUNT);
-	fanotify_event_cachep = KMEM_CACHE(fanotify_event, SLAB_PANIC);
+	fanotify_fid_event_cachep = KMEM_CACHE(fanotify_fid_event,
+					       SLAB_PANIC);
+	fanotify_path_event_cachep = KMEM_CACHE(fanotify_path_event,
+						SLAB_PANIC);
 	if (IS_ENABLED(CONFIG_FANOTIFY_ACCESS_PERMISSIONS)) {
 		fanotify_perm_event_cachep =
 			KMEM_CACHE(fanotify_perm_event, SLAB_PANIC);
diff --git a/fs/notify/fsnotify.c b/fs/notify/fsnotify.c
index 46f2255..72d332c 100644
--- a/fs/notify/fsnotify.c
+++ b/fs/notify/fsnotify.c
@@ -143,15 +143,13 @@ void __fsnotify_update_child_dentry_flags(struct inode *inode)
 }
 
 /* Notify this dentry's parent about a child's events. */
-int __fsnotify_parent(const struct path *path, struct dentry *dentry, __u32 mask)
+int fsnotify_parent(struct dentry *dentry, __u32 mask, const void *data,
+		    int data_type)
 {
 	struct dentry *parent;
 	struct inode *p_inode;
 	int ret = 0;
 
-	if (!dentry)
-		dentry = path->dentry;
-
 	if (!(dentry->d_flags & DCACHE_FSNOTIFY_PARENT_WATCHED))
 		return 0;
 
@@ -168,12 +166,7 @@ int __fsnotify_parent(const struct path *path, struct dentry *dentry, __u32 mask
 		mask |= FS_EVENT_ON_CHILD;
 
 		take_dentry_name_snapshot(&name, dentry);
-		if (path)
-			ret = fsnotify(p_inode, mask, path, FSNOTIFY_EVENT_PATH,
-				       &name.name, 0);
-		else
-			ret = fsnotify(p_inode, mask, dentry->d_inode, FSNOTIFY_EVENT_INODE,
-				       &name.name, 0);
+		ret = fsnotify(p_inode, mask, data, data_type, &name.name, 0);
 		release_dentry_name_snapshot(&name);
 	}
 
@@ -181,7 +174,7 @@ int __fsnotify_parent(const struct path *path, struct dentry *dentry, __u32 mask
 
 	return ret;
 }
-EXPORT_SYMBOL_GPL(__fsnotify_parent);
+EXPORT_SYMBOL_GPL(fsnotify_parent);
 
 static int send_to_group(struct inode *to_tell,
 			 __u32 mask, const void *data,
@@ -318,6 +311,7 @@ static void fsnotify_iter_next(struct fsnotify_iter_info *iter_info)
 int fsnotify(struct inode *to_tell, __u32 mask, const void *data, int data_is,
 	     const struct qstr *file_name, u32 cookie)
 {
+	const struct path *path = fsnotify_data_path(data, data_is);
 	struct fsnotify_iter_info iter_info = {};
 	struct super_block *sb = to_tell->i_sb;
 	struct mount *mnt = NULL;
@@ -325,8 +319,8 @@ int fsnotify(struct inode *to_tell, __u32 mask, const void *data, int data_is,
 	int ret = 0;
 	__u32 test_mask = (mask & ALL_FSNOTIFY_EVENTS);
 
-	if (data_is == FSNOTIFY_EVENT_PATH) {
-		mnt = real_mount(((const struct path *)data)->mnt);
+	if (path) {
+		mnt = real_mount(path->mnt);
 		mnt_or_sb_mask |= mnt->mnt_fsnotify_mask;
 	}
 	/* An event "on child" is not intended for a mount/sb mark */
@@ -389,7 +383,7 @@ static __init int fsnotify_init(void)
 {
 	int ret;
 
-	BUILD_BUG_ON(HWEIGHT32(ALL_FSNOTIFY_BITS) != 25);
+	BUILD_BUG_ON(HWEIGHT32(ALL_FSNOTIFY_BITS) != 26);
 
 	ret = init_srcu_struct(&fsnotify_mark_srcu);
 	if (ret)
diff --git a/fs/notify/inotify/inotify_fsnotify.c b/fs/notify/inotify/inotify_fsnotify.c
index d510223..2ebc890 100644
--- a/fs/notify/inotify/inotify_fsnotify.c
+++ b/fs/notify/inotify/inotify_fsnotify.c
@@ -39,7 +39,7 @@ static bool event_compare(struct fsnotify_event *old_fsn,
 	if (old->mask & FS_IN_IGNORED)
 		return false;
 	if ((old->mask == new->mask) &&
-	    (old_fsn->inode == new_fsn->inode) &&
+	    (old_fsn->objectid == new_fsn->objectid) &&
 	    (old->name_len == new->name_len) &&
 	    (!old->name_len || !strcmp(old->name, new->name)))
 		return true;
@@ -61,6 +61,7 @@ int inotify_handle_event(struct fsnotify_group *group,
 			 const struct qstr *file_name, u32 cookie,
 			 struct fsnotify_iter_info *iter_info)
 {
+	const struct path *path = fsnotify_data_path(data, data_type);
 	struct fsnotify_mark *inode_mark = fsnotify_iter_inode_mark(iter_info);
 	struct inotify_inode_mark *i_mark;
 	struct inotify_event_info *event;
@@ -73,12 +74,9 @@ int inotify_handle_event(struct fsnotify_group *group,
 		return 0;
 
 	if ((inode_mark->mask & FS_EXCL_UNLINK) &&
-	    (data_type == FSNOTIFY_EVENT_PATH)) {
-		const struct path *path = data;
+	    path && d_unlinked(path->dentry))
+		return 0;
 
-		if (d_unlinked(path->dentry))
-			return 0;
-	}
 	if (file_name) {
 		len = file_name->len;
 		alloc_len += len + 1;
@@ -118,7 +116,7 @@ int inotify_handle_event(struct fsnotify_group *group,
 		mask &= ~IN_ISDIR;
 
 	fsn_event = &event->fse;
-	fsnotify_init_event(fsn_event, inode);
+	fsnotify_init_event(fsn_event, (unsigned long)inode);
 	event->mask = mask;
 	event->wd = i_mark->wd;
 	event->sync_cookie = cookie;
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index 107537a..81ffc86 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -635,7 +635,7 @@ static struct fsnotify_group *inotify_new_group(unsigned int max_events)
 		return ERR_PTR(-ENOMEM);
 	}
 	group->overflow_event = &oevent->fse;
-	fsnotify_init_event(group->overflow_event, NULL);
+	fsnotify_init_event(group->overflow_event, 0);
 	oevent->mask = FS_Q_OVERFLOW;
 	oevent->wd = -1;
 	oevent->sync_cookie = 0;
diff --git a/fs/ocfs2/alloc.c b/fs/ocfs2/alloc.c
index 65b3abb..2f834ad 100644
--- a/fs/ocfs2/alloc.c
+++ b/fs/ocfs2/alloc.c
@@ -7402,6 +7402,10 @@ int ocfs2_truncate_inline(struct inode *inode, struct buffer_head *di_bh,
 	struct ocfs2_dinode *di = (struct ocfs2_dinode *)di_bh->b_data;
 	struct ocfs2_inline_data *idata = &di->id2.i_data;
 
+	/* No need to punch hole beyond i_size. */
+	if (start >= i_size_read(inode))
+		return 0;
+
 	if (end > i_size_read(inode))
 		end = i_size_read(inode);
 
diff --git a/fs/orangefs/file.c b/fs/orangefs/file.c
index c740159..af375e0 100644
--- a/fs/orangefs/file.c
+++ b/fs/orangefs/file.c
@@ -346,23 +346,8 @@ static ssize_t orangefs_file_read_iter(struct kiocb *iocb,
     struct iov_iter *iter)
 {
 	int ret;
-	struct orangefs_read_options *ro;
-
 	orangefs_stats.reads++;
 
-	/*
-	 * Remember how they set "count" in read(2) or pread(2) or whatever -
-	 * users can use count as a knob to control orangefs io size and later
-	 * we can try to help them fill as many pages as possible in readpage.
-	 */
-	if (!iocb->ki_filp->private_data) {
-		iocb->ki_filp->private_data = kmalloc(sizeof *ro, GFP_KERNEL);
-		if (!iocb->ki_filp->private_data)
-			return(ENOMEM);
-		ro = iocb->ki_filp->private_data;
-		ro->blksiz = iter->count;
-	}
-
 	down_read(&file_inode(iocb->ki_filp)->i_rwsem);
 	ret = orangefs_revalidate_mapping(file_inode(iocb->ki_filp));
 	if (ret)
@@ -650,12 +635,6 @@ static int orangefs_lock(struct file *filp, int cmd, struct file_lock *fl)
 	return rc;
 }
 
-static int orangefs_file_open(struct inode * inode, struct file *file)
-{
-	file->private_data = NULL;
-	return generic_file_open(inode, file);
-}
-
 static int orangefs_flush(struct file *file, fl_owner_t id)
 {
 	/*
@@ -666,19 +645,8 @@ static int orangefs_flush(struct file *file, fl_owner_t id)
 	 * on an explicit fsync call.  This duplicates historical OrangeFS
 	 * behavior.
 	 */
-	struct inode *inode = file->f_mapping->host;
 	int r;
 
-	kfree(file->private_data);
-	file->private_data = NULL;
-
-	if (inode->i_state & I_DIRTY_TIME) {
-		spin_lock(&inode->i_lock);
-		inode->i_state &= ~I_DIRTY_TIME;
-		spin_unlock(&inode->i_lock);
-		mark_inode_dirty_sync(inode);
-	}
-
 	r = filemap_write_and_wait_range(file->f_mapping, 0, LLONG_MAX);
 	if (r > 0)
 		return 0;
@@ -694,7 +662,7 @@ const struct file_operations orangefs_file_operations = {
 	.lock		= orangefs_lock,
 	.unlocked_ioctl	= orangefs_ioctl,
 	.mmap		= orangefs_file_mmap,
-	.open		= orangefs_file_open,
+	.open		= generic_file_open,
 	.flush		= orangefs_flush,
 	.release	= orangefs_file_release,
 	.fsync		= orangefs_fsync,
diff --git a/fs/orangefs/inode.c b/fs/orangefs/inode.c
index 961c0fd..12ae630 100644
--- a/fs/orangefs/inode.c
+++ b/fs/orangefs/inode.c
@@ -259,46 +259,19 @@ static int orangefs_readpage(struct file *file, struct page *page)
 	pgoff_t index; /* which page */
 	struct page *next_page;
 	char *kaddr;
-	struct orangefs_read_options *ro = file->private_data;
 	loff_t read_size;
-	loff_t roundedup;
 	int buffer_index = -1; /* orangefs shared memory slot */
 	int slot_index;   /* index into slot */
 	int remaining;
 
 	/*
-	 * If they set some miniscule size for "count" in read(2)
-	 * (for example) then let's try to read a page, or the whole file
-	 * if it is smaller than a page. Once "count" goes over a page
-	 * then lets round up to the highest page size multiple that is
-	 * less than or equal to "count" and do that much orangefs IO and
-	 * try to fill as many pages as we can from it.
-	 *
-	 * "count" should be represented in ro->blksiz.
-	 *
-	 * inode->i_size = file size.
+	 * Get up to this many bytes from Orangefs at a time and try
+	 * to fill them into the page cache at once. Tests with dd made
+	 * this seem like a reasonable static number, if there was
+	 * interest perhaps this number could be made setable through
+	 * sysfs...
 	 */
-	if (ro) {
-		if (ro->blksiz < PAGE_SIZE) {
-			if (inode->i_size < PAGE_SIZE)
-				read_size = inode->i_size;
-			else
-				read_size = PAGE_SIZE;
-		} else {
-			roundedup = ((PAGE_SIZE - 1) & ro->blksiz) ?
-				((ro->blksiz + PAGE_SIZE) & ~(PAGE_SIZE -1)) :
-				ro->blksiz;
-			if (roundedup > inode->i_size)
-				read_size = inode->i_size;
-			else
-				read_size = roundedup;
-
-		}
-	} else {
-		read_size = PAGE_SIZE;
-	}
-	if (!read_size)
-		read_size = PAGE_SIZE;
+	read_size = 524288;
 
 	if (PageDirty(page))
 		orangefs_launder_page(page);
diff --git a/fs/orangefs/orangefs-kernel.h b/fs/orangefs/orangefs-kernel.h
index ed67f39..e12aeb9 100644
--- a/fs/orangefs/orangefs-kernel.h
+++ b/fs/orangefs/orangefs-kernel.h
@@ -239,10 +239,6 @@ struct orangefs_write_range {
 	kgid_t gid;
 };
 
-struct orangefs_read_options {
-	ssize_t blksiz;
-};
-
 extern struct orangefs_stats orangefs_stats;
 
 /*
diff --git a/fs/overlayfs/copy_up.c b/fs/overlayfs/copy_up.c
index 9fc47c2..9709cf2 100644
--- a/fs/overlayfs/copy_up.c
+++ b/fs/overlayfs/copy_up.c
@@ -36,6 +36,13 @@ static int ovl_ccup_get(char *buf, const struct kernel_param *param)
 module_param_call(check_copy_up, ovl_ccup_set, ovl_ccup_get, NULL, 0644);
 MODULE_PARM_DESC(check_copy_up, "Obsolete; does nothing");
 
+static bool ovl_must_copy_xattr(const char *name)
+{
+	return !strcmp(name, XATTR_POSIX_ACL_ACCESS) ||
+	       !strcmp(name, XATTR_POSIX_ACL_DEFAULT) ||
+	       !strncmp(name, XATTR_SECURITY_PREFIX, XATTR_SECURITY_PREFIX_LEN);
+}
+
 int ovl_copy_xattr(struct dentry *old, struct dentry *new)
 {
 	ssize_t list_size, size, value_size = 0;
@@ -107,8 +114,13 @@ int ovl_copy_xattr(struct dentry *old, struct dentry *new)
 			continue; /* Discard */
 		}
 		error = vfs_setxattr(new, name, value, size, 0);
-		if (error)
-			break;
+		if (error) {
+			if (error != -EOPNOTSUPP || ovl_must_copy_xattr(name))
+				break;
+
+			/* Ignore failure to copy unknown xattrs */
+			error = 0;
+		}
 	}
 	kfree(value);
 out:
diff --git a/fs/overlayfs/dir.c b/fs/overlayfs/dir.c
index 8e57d53..279009d 100644
--- a/fs/overlayfs/dir.c
+++ b/fs/overlayfs/dir.c
@@ -42,7 +42,7 @@ int ovl_cleanup(struct inode *wdir, struct dentry *wdentry)
 	return err;
 }
 
-static struct dentry *ovl_lookup_temp(struct dentry *workdir)
+struct dentry *ovl_lookup_temp(struct dentry *workdir)
 {
 	struct dentry *temp;
 	char name[20];
@@ -243,6 +243,9 @@ static int ovl_instantiate(struct dentry *dentry, struct inode *inode,
 
 	ovl_dir_modified(dentry->d_parent, false);
 	ovl_dentry_set_upper_alias(dentry);
+	ovl_dentry_update_reval(dentry, newdentry,
+			DCACHE_OP_REVALIDATE | DCACHE_OP_WEAK_REVALIDATE);
+
 	if (!hardlink) {
 		/*
 		 * ovl_obtain_alias() can be called after ovl_create_real()
@@ -819,6 +822,28 @@ static bool ovl_pure_upper(struct dentry *dentry)
 	       !ovl_test_flag(OVL_WHITEOUTS, d_inode(dentry));
 }
 
+static void ovl_drop_nlink(struct dentry *dentry)
+{
+	struct inode *inode = d_inode(dentry);
+	struct dentry *alias;
+
+	/* Try to find another, hashed alias */
+	spin_lock(&inode->i_lock);
+	hlist_for_each_entry(alias, &inode->i_dentry, d_u.d_alias) {
+		if (alias != dentry && !d_unhashed(alias))
+			break;
+	}
+	spin_unlock(&inode->i_lock);
+
+	/*
+	 * Changes to underlying layers may cause i_nlink to lose sync with
+	 * reality.  In this case prevent the link count from going to zero
+	 * prematurely.
+	 */
+	if (inode->i_nlink > !!alias)
+		drop_nlink(inode);
+}
+
 static int ovl_do_remove(struct dentry *dentry, bool is_dir)
 {
 	int err;
@@ -856,7 +881,7 @@ static int ovl_do_remove(struct dentry *dentry, bool is_dir)
 		if (is_dir)
 			clear_nlink(dentry->d_inode);
 		else
-			drop_nlink(dentry->d_inode);
+			ovl_drop_nlink(dentry);
 	}
 	ovl_nlink_end(dentry);
 
@@ -1201,7 +1226,7 @@ static int ovl_rename(struct inode *olddir, struct dentry *old,
 		if (new_is_dir)
 			clear_nlink(d_inode(new));
 		else
-			drop_nlink(d_inode(new));
+			ovl_drop_nlink(new);
 	}
 
 	ovl_dir_modified(old->d_parent, ovl_type_origin(old) ||
diff --git a/fs/overlayfs/export.c b/fs/overlayfs/export.c
index 6f54d70..475c61f 100644
--- a/fs/overlayfs/export.c
+++ b/fs/overlayfs/export.c
@@ -308,29 +308,35 @@ static struct dentry *ovl_obtain_alias(struct super_block *sb,
 		ovl_set_flag(OVL_UPPERDATA, inode);
 
 	dentry = d_find_any_alias(inode);
-	if (!dentry) {
-		dentry = d_alloc_anon(inode->i_sb);
-		if (!dentry)
-			goto nomem;
-		oe = ovl_alloc_entry(lower ? 1 : 0);
-		if (!oe)
-			goto nomem;
+	if (dentry)
+		goto out_iput;
 
-		if (lower) {
-			oe->lowerstack->dentry = dget(lower);
-			oe->lowerstack->layer = lowerpath->layer;
-		}
-		dentry->d_fsdata = oe;
-		if (upper_alias)
-			ovl_dentry_set_upper_alias(dentry);
+	dentry = d_alloc_anon(inode->i_sb);
+	if (unlikely(!dentry))
+		goto nomem;
+	oe = ovl_alloc_entry(lower ? 1 : 0);
+	if (!oe)
+		goto nomem;
+
+	if (lower) {
+		oe->lowerstack->dentry = dget(lower);
+		oe->lowerstack->layer = lowerpath->layer;
 	}
+	dentry->d_fsdata = oe;
+	if (upper_alias)
+		ovl_dentry_set_upper_alias(dentry);
+
+	ovl_dentry_update_reval(dentry, upper,
+			DCACHE_OP_REVALIDATE | DCACHE_OP_WEAK_REVALIDATE);
 
 	return d_instantiate_anon(dentry, inode);
 
 nomem:
-	iput(inode);
 	dput(dentry);
-	return ERR_PTR(-ENOMEM);
+	dentry = ERR_PTR(-ENOMEM);
+out_iput:
+	iput(inode);
+	return dentry;
 }
 
 /* Get the upper or lower dentry in stach whose on layer @idx */
diff --git a/fs/overlayfs/inode.c b/fs/overlayfs/inode.c
index 79e8994..b0d42ec 100644
--- a/fs/overlayfs/inode.c
+++ b/fs/overlayfs/inode.c
@@ -79,6 +79,7 @@ static int ovl_map_dev_ino(struct dentry *dentry, struct kstat *stat, int fsid)
 {
 	bool samefs = ovl_same_fs(dentry->d_sb);
 	unsigned int xinobits = ovl_xino_bits(dentry->d_sb);
+	unsigned int xinoshift = 64 - xinobits;
 
 	if (samefs) {
 		/*
@@ -89,22 +90,22 @@ static int ovl_map_dev_ino(struct dentry *dentry, struct kstat *stat, int fsid)
 		stat->dev = dentry->d_sb->s_dev;
 		return 0;
 	} else if (xinobits) {
-		unsigned int shift = 64 - xinobits;
 		/*
 		 * All inode numbers of underlying fs should not be using the
 		 * high xinobits, so we use high xinobits to partition the
 		 * overlay st_ino address space. The high bits holds the fsid
-		 * (upper fsid is 0). This way overlay inode numbers are unique
-		 * and all inodes use overlay st_dev. Inode numbers are also
-		 * persistent for a given layer configuration.
+		 * (upper fsid is 0). The lowest xinobit is reserved for mapping
+		 * the non-peresistent inode numbers range in case of overflow.
+		 * This way all overlay inode numbers are unique and use the
+		 * overlay st_dev.
 		 */
-		if (stat->ino >> shift) {
-			pr_warn_ratelimited("inode number too big (%pd2, ino=%llu, xinobits=%d)\n",
-					    dentry, stat->ino, xinobits);
-		} else {
-			stat->ino |= ((u64)fsid) << shift;
+		if (likely(!(stat->ino >> xinoshift))) {
+			stat->ino |= ((u64)fsid) << (xinoshift + 1);
 			stat->dev = dentry->d_sb->s_dev;
 			return 0;
+		} else if (ovl_xino_warn(dentry->d_sb)) {
+			pr_warn_ratelimited("inode number too big (%pd2, ino=%llu, xinobits=%d)\n",
+					    dentry, stat->ino, xinobits);
 		}
 	}
 
@@ -504,7 +505,7 @@ static const struct address_space_operations ovl_aops = {
 
 /*
  * It is possible to stack overlayfs instance on top of another
- * overlayfs instance as lower layer. We need to annonate the
+ * overlayfs instance as lower layer. We need to annotate the
  * stackable i_mutex locks according to stack level of the super
  * block instance. An overlayfs instance can never be in stack
  * depth 0 (there is always a real fs below it).  An overlayfs
@@ -561,27 +562,73 @@ static inline void ovl_lockdep_annotate_inode_mutex_key(struct inode *inode)
 #endif
 }
 
-static void ovl_fill_inode(struct inode *inode, umode_t mode, dev_t rdev,
-			   unsigned long ino, int fsid)
+static void ovl_next_ino(struct inode *inode)
+{
+	struct ovl_fs *ofs = inode->i_sb->s_fs_info;
+
+	inode->i_ino = atomic_long_inc_return(&ofs->last_ino);
+	if (unlikely(!inode->i_ino))
+		inode->i_ino = atomic_long_inc_return(&ofs->last_ino);
+}
+
+static void ovl_map_ino(struct inode *inode, unsigned long ino, int fsid)
 {
 	int xinobits = ovl_xino_bits(inode->i_sb);
+	unsigned int xinoshift = 64 - xinobits;
 
 	/*
 	 * When d_ino is consistent with st_ino (samefs or i_ino has enough
 	 * bits to encode layer), set the same value used for st_ino to i_ino,
 	 * so inode number exposed via /proc/locks and a like will be
 	 * consistent with d_ino and st_ino values. An i_ino value inconsistent
-	 * with d_ino also causes nfsd readdirplus to fail.  When called from
-	 * ovl_new_inode(), ino arg is 0, so i_ino will be updated to real
-	 * upper inode i_ino on ovl_inode_init() or ovl_inode_update().
+	 * with d_ino also causes nfsd readdirplus to fail.
 	 */
-	if (ovl_same_dev(inode->i_sb)) {
-		inode->i_ino = ino;
-		if (xinobits && fsid && !(ino >> (64 - xinobits)))
-			inode->i_ino |= (unsigned long)fsid << (64 - xinobits);
-	} else {
-		inode->i_ino = get_next_ino();
+	inode->i_ino = ino;
+	if (ovl_same_fs(inode->i_sb)) {
+		return;
+	} else if (xinobits && likely(!(ino >> xinoshift))) {
+		inode->i_ino |= (unsigned long)fsid << (xinoshift + 1);
+		return;
 	}
+
+	/*
+	 * For directory inodes on non-samefs with xino disabled or xino
+	 * overflow, we allocate a non-persistent inode number, to be used for
+	 * resolving st_ino collisions in ovl_map_dev_ino().
+	 *
+	 * To avoid ino collision with legitimate xino values from upper
+	 * layer (fsid 0), use the lowest xinobit to map the non
+	 * persistent inode numbers to the unified st_ino address space.
+	 */
+	if (S_ISDIR(inode->i_mode)) {
+		ovl_next_ino(inode);
+		if (xinobits) {
+			inode->i_ino &= ~0UL >> xinobits;
+			inode->i_ino |= 1UL << xinoshift;
+		}
+	}
+}
+
+void ovl_inode_init(struct inode *inode, struct ovl_inode_params *oip,
+		    unsigned long ino, int fsid)
+{
+	struct inode *realinode;
+
+	if (oip->upperdentry)
+		OVL_I(inode)->__upperdentry = oip->upperdentry;
+	if (oip->lowerpath && oip->lowerpath->dentry)
+		OVL_I(inode)->lower = igrab(d_inode(oip->lowerpath->dentry));
+	if (oip->lowerdata)
+		OVL_I(inode)->lowerdata = igrab(d_inode(oip->lowerdata));
+
+	realinode = ovl_inode_real(inode);
+	ovl_copyattr(realinode, inode);
+	ovl_copyflags(realinode, inode);
+	ovl_map_ino(inode, ino, fsid);
+}
+
+static void ovl_fill_inode(struct inode *inode, umode_t mode, dev_t rdev)
+{
 	inode->i_mode = mode;
 	inode->i_flags |= S_NOCMTIME;
 #ifdef CONFIG_FS_POSIX_ACL
@@ -719,7 +766,7 @@ struct inode *ovl_new_inode(struct super_block *sb, umode_t mode, dev_t rdev)
 
 	inode = new_inode(sb);
 	if (inode)
-		ovl_fill_inode(inode, mode, rdev, 0, 0);
+		ovl_fill_inode(inode, mode, rdev);
 
 	return inode;
 }
@@ -891,7 +938,7 @@ struct inode *ovl_get_inode(struct super_block *sb,
 	struct dentry *lowerdentry = lowerpath ? lowerpath->dentry : NULL;
 	bool bylower = ovl_hash_bylower(sb, upperdentry, lowerdentry,
 					oip->index);
-	int fsid = bylower ? oip->lowerpath->layer->fsid : 0;
+	int fsid = bylower ? lowerpath->layer->fsid : 0;
 	bool is_dir, metacopy = false;
 	unsigned long ino = 0;
 	int err = oip->newinode ? -EEXIST : -ENOMEM;
@@ -941,9 +988,11 @@ struct inode *ovl_get_inode(struct super_block *sb,
 			err = -ENOMEM;
 			goto out_err;
 		}
+		ino = realinode->i_ino;
+		fsid = lowerpath->layer->fsid;
 	}
-	ovl_fill_inode(inode, realinode->i_mode, realinode->i_rdev, ino, fsid);
-	ovl_inode_init(inode, upperdentry, lowerdentry, oip->lowerdata);
+	ovl_fill_inode(inode, realinode->i_mode, realinode->i_rdev);
+	ovl_inode_init(inode, oip, ino, fsid);
 
 	if (upperdentry && ovl_is_impuredir(upperdentry))
 		ovl_set_flag(OVL_IMPURE, inode);
diff --git a/fs/overlayfs/namei.c b/fs/overlayfs/namei.c
index ed9e129..0db23ba 100644
--- a/fs/overlayfs/namei.c
+++ b/fs/overlayfs/namei.c
@@ -845,7 +845,7 @@ struct dentry *ovl_lookup(struct inode *dir, struct dentry *dentry,
 		if (err)
 			goto out;
 
-		if (upperdentry && unlikely(ovl_dentry_remote(upperdentry))) {
+		if (upperdentry && upperdentry->d_flags & DCACHE_OP_REAL) {
 			dput(upperdentry);
 			err = -EREMOTE;
 			goto out;
@@ -1076,6 +1076,9 @@ struct dentry *ovl_lookup(struct inode *dir, struct dentry *dentry,
 			goto out_free_oe;
 	}
 
+	ovl_dentry_update_reval(dentry, upperdentry,
+			DCACHE_OP_REVALIDATE | DCACHE_OP_WEAK_REVALIDATE);
+
 	revert_creds(old_cred);
 	if (origin_path) {
 		dput(origin_path->dentry);
diff --git a/fs/overlayfs/overlayfs.h b/fs/overlayfs/overlayfs.h
index 3d3f2b8..e6f3670 100644
--- a/fs/overlayfs/overlayfs.h
+++ b/fs/overlayfs/overlayfs.h
@@ -48,6 +48,12 @@ enum ovl_entry_flag {
 	OVL_E_CONNECTED,
 };
 
+enum {
+	OVL_XINO_OFF,
+	OVL_XINO_AUTO,
+	OVL_XINO_ON,
+};
+
 /*
  * The tuple (fh,uuid) is a universal unique identifier for a copy up origin,
  * where:
@@ -87,7 +93,7 @@ struct ovl_fb {
 	u8 flags;	/* OVL_FH_FLAG_* */
 	u8 type;	/* fid_type of fid */
 	uuid_t uuid;	/* uuid of filesystem */
-	u32 fid[0];	/* file identifier should be 32bit aligned in-memory */
+	u32 fid[];	/* file identifier should be 32bit aligned in-memory */
 } __packed;
 
 /* In-memory and on-wire format for overlay file handle */
@@ -230,6 +236,8 @@ bool ovl_index_all(struct super_block *sb);
 bool ovl_verify_lower(struct super_block *sb);
 struct ovl_entry *ovl_alloc_entry(unsigned int numlower);
 bool ovl_dentry_remote(struct dentry *dentry);
+void ovl_dentry_update_reval(struct dentry *dentry, struct dentry *upperdentry,
+			     unsigned int mask);
 bool ovl_dentry_weird(struct dentry *dentry);
 enum ovl_path_type ovl_path_type(struct dentry *dentry);
 void ovl_path_upper(struct dentry *dentry, struct path *path);
@@ -264,8 +272,6 @@ void ovl_set_upperdata(struct inode *inode);
 bool ovl_redirect_dir(struct super_block *sb);
 const char *ovl_dentry_get_redirect(struct dentry *dentry);
 void ovl_dentry_set_redirect(struct dentry *dentry, const char *redirect);
-void ovl_inode_init(struct inode *inode, struct dentry *upperdentry,
-		    struct dentry *lowerdentry, struct dentry *lowerdata);
 void ovl_inode_update(struct inode *inode, struct dentry *upperdentry);
 void ovl_dir_modified(struct dentry *dentry, bool impurity);
 u64 ovl_dentry_version_get(struct dentry *dentry);
@@ -301,6 +307,16 @@ static inline bool ovl_is_impuredir(struct dentry *dentry)
 	return ovl_check_dir_xattr(dentry, OVL_XATTR_IMPURE);
 }
 
+/*
+ * With xino=auto, we do best effort to keep all inodes on same st_dev and
+ * d_ino consistent with st_ino.
+ * With xino=on, we do the same effort but we warn if we failed.
+ */
+static inline bool ovl_xino_warn(struct super_block *sb)
+{
+	return OVL_FS(sb)->config.xino == OVL_XINO_ON;
+}
+
 /* All layers on same fs? */
 static inline bool ovl_same_fs(struct super_block *sb)
 {
@@ -410,6 +426,8 @@ struct ovl_inode_params {
 	char *redirect;
 	struct dentry *lowerdata;
 };
+void ovl_inode_init(struct inode *inode, struct ovl_inode_params *oip,
+		    unsigned long ino, int fsid);
 struct inode *ovl_new_inode(struct super_block *sb, umode_t mode, dev_t rdev);
 struct inode *ovl_lookup_inode(struct super_block *sb, struct dentry *real,
 			       bool is_upper);
@@ -451,6 +469,7 @@ struct ovl_cattr {
 struct dentry *ovl_create_real(struct inode *dir, struct dentry *newdentry,
 			       struct ovl_cattr *attr);
 int ovl_cleanup(struct inode *dir, struct dentry *dentry);
+struct dentry *ovl_lookup_temp(struct dentry *workdir);
 struct dentry *ovl_create_temp(struct dentry *workdir, struct ovl_cattr *attr);
 
 /* file.c */
diff --git a/fs/overlayfs/ovl_entry.h b/fs/overlayfs/ovl_entry.h
index 89015ea..5762d80 100644
--- a/fs/overlayfs/ovl_entry.h
+++ b/fs/overlayfs/ovl_entry.h
@@ -75,6 +75,8 @@ struct ovl_fs {
 	struct inode *indexdir_trap;
 	/* -1: disabled, 0: same fs, 1..32: number of unused ino bits */
 	int xino_mode;
+	/* For allocation of non-persistent inode numbers */
+	atomic_long_t last_ino;
 };
 
 static inline struct ovl_fs *OVL_FS(struct super_block *sb)
diff --git a/fs/overlayfs/readdir.c b/fs/overlayfs/readdir.c
index 40ac9ce..e452ff7 100644
--- a/fs/overlayfs/readdir.c
+++ b/fs/overlayfs/readdir.c
@@ -438,15 +438,23 @@ static struct ovl_dir_cache *ovl_cache_get(struct dentry *dentry)
 
 /* Map inode number to lower fs unique range */
 static u64 ovl_remap_lower_ino(u64 ino, int xinobits, int fsid,
-			       const char *name, int namelen)
+			       const char *name, int namelen, bool warn)
 {
-	if (ino >> (64 - xinobits)) {
-		pr_warn_ratelimited("d_ino too big (%.*s, ino=%llu, xinobits=%d)\n",
-				    namelen, name, ino, xinobits);
+	unsigned int xinoshift = 64 - xinobits;
+
+	if (unlikely(ino >> xinoshift)) {
+		if (warn) {
+			pr_warn_ratelimited("d_ino too big (%.*s, ino=%llu, xinobits=%d)\n",
+					    namelen, name, ino, xinobits);
+		}
 		return ino;
 	}
 
-	return ino | ((u64)fsid) << (64 - xinobits);
+	/*
+	 * The lowest xinobit is reserved for mapping the non-peresistent inode
+	 * numbers range, but this range is only exposed via st_ino, not here.
+	 */
+	return ino | ((u64)fsid) << (xinoshift + 1);
 }
 
 /*
@@ -515,7 +523,8 @@ static int ovl_cache_update_ino(struct path *path, struct ovl_cache_entry *p)
 	} else if (xinobits && !OVL_TYPE_UPPER(type)) {
 		ino = ovl_remap_lower_ino(ino, xinobits,
 					  ovl_layer_lower(this)->fsid,
-					  p->name, p->len);
+					  p->name, p->len,
+					  ovl_xino_warn(dir->d_sb));
 	}
 
 out:
@@ -645,6 +654,7 @@ struct ovl_readdir_translate {
 	u64 parent_ino;
 	int fsid;
 	int xinobits;
+	bool xinowarn;
 };
 
 static int ovl_fill_real(struct dir_context *ctx, const char *name,
@@ -665,7 +675,7 @@ static int ovl_fill_real(struct dir_context *ctx, const char *name,
 			ino = p->ino;
 	} else if (rdt->xinobits) {
 		ino = ovl_remap_lower_ino(ino, rdt->xinobits, rdt->fsid,
-					  name, namelen);
+					  name, namelen, rdt->xinowarn);
 	}
 
 	return orig_ctx->actor(orig_ctx, name, namelen, offset, ino, d_type);
@@ -696,6 +706,7 @@ static int ovl_iterate_real(struct file *file, struct dir_context *ctx)
 		.ctx.actor = ovl_fill_real,
 		.orig_ctx = ctx,
 		.xinobits = ovl_xino_bits(dir->d_sb),
+		.xinowarn = ovl_xino_warn(dir->d_sb),
 	};
 
 	if (rdt.xinobits && lower_layer)
diff --git a/fs/overlayfs/super.c b/fs/overlayfs/super.c
index ac967f1..732ad54 100644
--- a/fs/overlayfs/super.c
+++ b/fs/overlayfs/super.c
@@ -113,53 +113,54 @@ static struct dentry *ovl_d_real(struct dentry *dentry,
 	return dentry;
 }
 
-static int ovl_dentry_revalidate(struct dentry *dentry, unsigned int flags)
+static int ovl_revalidate_real(struct dentry *d, unsigned int flags, bool weak)
 {
-	struct ovl_entry *oe = dentry->d_fsdata;
-	unsigned int i;
 	int ret = 1;
 
-	for (i = 0; i < oe->numlower; i++) {
-		struct dentry *d = oe->lowerstack[i].dentry;
-
-		if (d->d_flags & DCACHE_OP_REVALIDATE) {
-			ret = d->d_op->d_revalidate(d, flags);
-			if (ret < 0)
-				return ret;
-			if (!ret) {
-				if (!(flags & LOOKUP_RCU))
-					d_invalidate(d);
-				return -ESTALE;
-			}
-		}
-	}
-	return 1;
-}
-
-static int ovl_dentry_weak_revalidate(struct dentry *dentry, unsigned int flags)
-{
-	struct ovl_entry *oe = dentry->d_fsdata;
-	unsigned int i;
-	int ret = 1;
-
-	for (i = 0; i < oe->numlower; i++) {
-		struct dentry *d = oe->lowerstack[i].dentry;
-
-		if (d->d_flags & DCACHE_OP_WEAK_REVALIDATE) {
-			ret = d->d_op->d_weak_revalidate(d, flags);
-			if (ret <= 0)
-				break;
+	if (weak) {
+		if (d->d_flags & DCACHE_OP_WEAK_REVALIDATE)
+			ret =  d->d_op->d_weak_revalidate(d, flags);
+	} else if (d->d_flags & DCACHE_OP_REVALIDATE) {
+		ret = d->d_op->d_revalidate(d, flags);
+		if (!ret) {
+			if (!(flags & LOOKUP_RCU))
+				d_invalidate(d);
+			ret = -ESTALE;
 		}
 	}
 	return ret;
 }
 
-static const struct dentry_operations ovl_dentry_operations = {
-	.d_release = ovl_dentry_release,
-	.d_real = ovl_d_real,
-};
+static int ovl_dentry_revalidate_common(struct dentry *dentry,
+					unsigned int flags, bool weak)
+{
+	struct ovl_entry *oe = dentry->d_fsdata;
+	struct dentry *upper;
+	unsigned int i;
+	int ret = 1;
 
-static const struct dentry_operations ovl_reval_dentry_operations = {
+	upper = ovl_dentry_upper(dentry);
+	if (upper)
+		ret = ovl_revalidate_real(upper, flags, weak);
+
+	for (i = 0; ret > 0 && i < oe->numlower; i++) {
+		ret = ovl_revalidate_real(oe->lowerstack[i].dentry, flags,
+					  weak);
+	}
+	return ret;
+}
+
+static int ovl_dentry_revalidate(struct dentry *dentry, unsigned int flags)
+{
+	return ovl_dentry_revalidate_common(dentry, flags, false);
+}
+
+static int ovl_dentry_weak_revalidate(struct dentry *dentry, unsigned int flags)
+{
+	return ovl_dentry_revalidate_common(dentry, flags, true);
+}
+
+static const struct dentry_operations ovl_dentry_operations = {
 	.d_release = ovl_dentry_release,
 	.d_real = ovl_d_real,
 	.d_revalidate = ovl_dentry_revalidate,
@@ -316,12 +317,6 @@ static const char *ovl_redirect_mode_def(void)
 	return ovl_redirect_dir_def ? "on" : "off";
 }
 
-enum {
-	OVL_XINO_OFF,
-	OVL_XINO_AUTO,
-	OVL_XINO_ON,
-};
-
 static const char * const ovl_xino_str[] = {
 	"off",
 	"auto",
@@ -751,13 +746,12 @@ static int ovl_mount_dir(const char *name, struct path *path)
 		ovl_unescape(tmp);
 		err = ovl_mount_dir_noesc(tmp, path);
 
-		if (!err)
-			if (ovl_dentry_remote(path->dentry)) {
-				pr_err("filesystem on '%s' not supported as upperdir\n",
-				       tmp);
-				path_put_init(path);
-				err = -EINVAL;
-			}
+		if (!err && path->dentry->d_flags & DCACHE_OP_REAL) {
+			pr_err("filesystem on '%s' not supported as upperdir\n",
+			       tmp);
+			path_put_init(path);
+			err = -EINVAL;
+		}
 		kfree(tmp);
 	}
 	return err;
@@ -778,7 +772,7 @@ static int ovl_check_namelen(struct path *path, struct ovl_fs *ofs,
 }
 
 static int ovl_lower_dir(const char *name, struct path *path,
-			 struct ovl_fs *ofs, int *stack_depth, bool *remote)
+			 struct ovl_fs *ofs, int *stack_depth)
 {
 	int fh_type;
 	int err;
@@ -793,9 +787,6 @@ static int ovl_lower_dir(const char *name, struct path *path,
 
 	*stack_depth = max(*stack_depth, path->mnt->mnt_sb->s_stack_depth);
 
-	if (ovl_dentry_remote(path->dentry))
-		*remote = true;
-
 	/*
 	 * The inodes index feature and NFS export need to encode and decode
 	 * file handles, so they require that all layers support them.
@@ -1074,11 +1065,73 @@ static int ovl_get_upper(struct super_block *sb, struct ovl_fs *ofs,
 	return err;
 }
 
+/*
+ * Returns 1 if RENAME_WHITEOUT is supported, 0 if not supported and
+ * negative values if error is encountered.
+ */
+static int ovl_check_rename_whiteout(struct dentry *workdir)
+{
+	struct inode *dir = d_inode(workdir);
+	struct dentry *temp;
+	struct dentry *dest;
+	struct dentry *whiteout;
+	struct name_snapshot name;
+	int err;
+
+	inode_lock_nested(dir, I_MUTEX_PARENT);
+
+	temp = ovl_create_temp(workdir, OVL_CATTR(S_IFREG | 0));
+	err = PTR_ERR(temp);
+	if (IS_ERR(temp))
+		goto out_unlock;
+
+	dest = ovl_lookup_temp(workdir);
+	err = PTR_ERR(dest);
+	if (IS_ERR(dest)) {
+		dput(temp);
+		goto out_unlock;
+	}
+
+	/* Name is inline and stable - using snapshot as a copy helper */
+	take_dentry_name_snapshot(&name, temp);
+	err = ovl_do_rename(dir, temp, dir, dest, RENAME_WHITEOUT);
+	if (err) {
+		if (err == -EINVAL)
+			err = 0;
+		goto cleanup_temp;
+	}
+
+	whiteout = lookup_one_len(name.name.name, workdir, name.name.len);
+	err = PTR_ERR(whiteout);
+	if (IS_ERR(whiteout))
+		goto cleanup_temp;
+
+	err = ovl_is_whiteout(whiteout);
+
+	/* Best effort cleanup of whiteout and temp file */
+	if (err)
+		ovl_cleanup(dir, whiteout);
+	dput(whiteout);
+
+cleanup_temp:
+	ovl_cleanup(dir, temp);
+	release_dentry_name_snapshot(&name);
+	dput(temp);
+	dput(dest);
+
+out_unlock:
+	inode_unlock(dir);
+
+	return err;
+}
+
 static int ovl_make_workdir(struct super_block *sb, struct ovl_fs *ofs,
 			    struct path *workpath)
 {
 	struct vfsmount *mnt = ofs->upper_mnt;
 	struct dentry *temp;
+	bool rename_whiteout;
+	bool d_type;
 	int fh_type;
 	int err;
 
@@ -1104,11 +1157,8 @@ static int ovl_make_workdir(struct super_block *sb, struct ovl_fs *ofs,
 	if (err < 0)
 		goto out;
 
-	/*
-	 * We allowed this configuration and don't want to break users over
-	 * kernel upgrade. So warn instead of erroring out.
-	 */
-	if (!err)
+	d_type = err;
+	if (!d_type)
 		pr_warn("upper fs needs to support d_type.\n");
 
 	/* Check if upper/work fs supports O_TMPFILE */
@@ -1119,6 +1169,16 @@ static int ovl_make_workdir(struct super_block *sb, struct ovl_fs *ofs,
 	else
 		pr_warn("upper fs does not support tmpfile.\n");
 
+
+	/* Check if upper/work fs supports RENAME_WHITEOUT */
+	err = ovl_check_rename_whiteout(ofs->workdir);
+	if (err < 0)
+		goto out;
+
+	rename_whiteout = err;
+	if (!rename_whiteout)
+		pr_warn("upper fs does not support RENAME_WHITEOUT.\n");
+
 	/*
 	 * Check if upper/work fs supports trusted.overlay.* xattr
 	 */
@@ -1133,6 +1193,18 @@ static int ovl_make_workdir(struct super_block *sb, struct ovl_fs *ofs,
 		vfs_removexattr(ofs->workdir, OVL_XATTR_OPAQUE);
 	}
 
+	/*
+	 * We allowed sub-optimal upper fs configuration and don't want to break
+	 * users over kernel upgrade, but we never allowed remote upper fs, so
+	 * we can enforce strict requirements for remote upper fs.
+	 */
+	if (ovl_dentry_remote(ofs->workdir) &&
+	    (!d_type || !rename_whiteout || ofs->noxattr)) {
+		pr_err("upper fs missing required features.\n");
+		err = -EINVAL;
+		goto out;
+	}
+
 	/* Check if upper/work fs supports file handles */
 	fh_type = ovl_can_decode_fh(ofs->workdir->d_sb);
 	if (ofs->config.index && !fh_type) {
@@ -1401,11 +1473,12 @@ static int ovl_get_layers(struct super_block *sb, struct ovl_fs *ofs,
 
 	/*
 	 * When all layers on same fs, overlay can use real inode numbers.
-	 * With mount option "xino=on", mounter declares that there are enough
-	 * free high bits in underlying fs to hold the unique fsid.
+	 * With mount option "xino=<on|auto>", mounter declares that there are
+	 * enough free high bits in underlying fs to hold the unique fsid.
 	 * If overlayfs does encounter underlying inodes using the high xino
 	 * bits reserved for fsid, it emits a warning and uses the original
-	 * inode number.
+	 * inode number or a non persistent inode number allocated from a
+	 * dedicated range.
 	 */
 	if (ofs->numfs - !ofs->upper_mnt == 1) {
 		if (ofs->config.xino == OVL_XINO_ON)
@@ -1413,14 +1486,16 @@ static int ovl_get_layers(struct super_block *sb, struct ovl_fs *ofs,
 		ofs->xino_mode = 0;
 	} else if (ofs->config.xino == OVL_XINO_OFF) {
 		ofs->xino_mode = -1;
-	} else if (ofs->config.xino == OVL_XINO_ON && ofs->xino_mode < 0) {
+	} else if (ofs->xino_mode < 0) {
 		/*
 		 * This is a roundup of number of bits needed for encoding
-		 * fsid, where fsid 0 is reserved for upper fs even with
-		 * lower only overlay.
+		 * fsid, where fsid 0 is reserved for upper fs (even with
+		 * lower only overlay) +1 extra bit is reserved for the non
+		 * persistent inode number range that is used for resolving
+		 * xino lower bits overflow.
 		 */
-		BUILD_BUG_ON(ilog2(OVL_MAX_STACK) > 31);
-		ofs->xino_mode = ilog2(ofs->numfs - 1) + 1;
+		BUILD_BUG_ON(ilog2(OVL_MAX_STACK) > 30);
+		ofs->xino_mode = ilog2(ofs->numfs - 1) + 2;
 	}
 
 	if (ofs->xino_mode > 0) {
@@ -1440,7 +1515,6 @@ static struct ovl_entry *ovl_get_lowerstack(struct super_block *sb,
 	char *lowertmp, *lower;
 	struct path *stack = NULL;
 	unsigned int stacklen, numlower = 0, i;
-	bool remote = false;
 	struct ovl_entry *oe;
 
 	err = -ENOMEM;
@@ -1472,7 +1546,7 @@ static struct ovl_entry *ovl_get_lowerstack(struct super_block *sb,
 	lower = lowertmp;
 	for (numlower = 0; numlower < stacklen; numlower++) {
 		err = ovl_lower_dir(lower, &stack[numlower], ofs,
-				    &sb->s_stack_depth, &remote);
+				    &sb->s_stack_depth);
 		if (err)
 			goto out_err;
 
@@ -1500,11 +1574,6 @@ static struct ovl_entry *ovl_get_lowerstack(struct super_block *sb,
 		oe->lowerstack[i].layer = &ofs->layers[i+1];
 	}
 
-	if (remote)
-		sb->s_d_op = &ovl_reval_dentry_operations;
-	else
-		sb->s_d_op = &ovl_dentry_operations;
-
 out:
 	for (i = 0; i < numlower; i++)
 		path_put(&stack[i]);
@@ -1589,6 +1658,44 @@ static int ovl_check_overlapping_layers(struct super_block *sb,
 	return 0;
 }
 
+static struct dentry *ovl_get_root(struct super_block *sb,
+				   struct dentry *upperdentry,
+				   struct ovl_entry *oe)
+{
+	struct dentry *root;
+	struct ovl_path *lowerpath = &oe->lowerstack[0];
+	unsigned long ino = d_inode(lowerpath->dentry)->i_ino;
+	int fsid = lowerpath->layer->fsid;
+	struct ovl_inode_params oip = {
+		.upperdentry = upperdentry,
+		.lowerpath = lowerpath,
+	};
+
+	root = d_make_root(ovl_new_inode(sb, S_IFDIR, 0));
+	if (!root)
+		return NULL;
+
+	root->d_fsdata = oe;
+
+	if (upperdentry) {
+		/* Root inode uses upper st_ino/i_ino */
+		ino = d_inode(upperdentry)->i_ino;
+		fsid = 0;
+		ovl_dentry_set_upper_alias(root);
+		if (ovl_is_impuredir(upperdentry))
+			ovl_set_flag(OVL_IMPURE, d_inode(root));
+	}
+
+	/* Root is always merge -> can have whiteouts */
+	ovl_set_flag(OVL_WHITEOUTS, d_inode(root));
+	ovl_dentry_set_flag(OVL_E_CONNECTED, root);
+	ovl_set_upperdata(d_inode(root));
+	ovl_inode_init(d_inode(root), &oip, ino, fsid);
+	ovl_dentry_update_reval(root, upperdentry, DCACHE_OP_WEAK_REVALIDATE);
+
+	return root;
+}
+
 static int ovl_fill_super(struct super_block *sb, void *data, int silent)
 {
 	struct path upperpath = { };
@@ -1598,6 +1705,8 @@ static int ovl_fill_super(struct super_block *sb, void *data, int silent)
 	struct cred *cred;
 	int err;
 
+	sb->s_d_op = &ovl_dentry_operations;
+
 	err = -ENOMEM;
 	ofs = kzalloc(sizeof(struct ovl_fs), GFP_KERNEL);
 	if (!ofs)
@@ -1624,6 +1733,7 @@ static int ovl_fill_super(struct super_block *sb, void *data, int silent)
 
 	sb->s_stack_depth = 0;
 	sb->s_maxbytes = MAX_LFS_FILESIZE;
+	atomic_long_set(&ofs->last_ino, 1);
 	/* Assume underlaying fs uses 32bit inodes unless proven otherwise */
 	if (ofs->config.xino != OVL_XINO_OFF) {
 		ofs->xino_mode = BITS_PER_LONG - 32;
@@ -1710,25 +1820,11 @@ static int ovl_fill_super(struct super_block *sb, void *data, int silent)
 	sb->s_flags |= SB_POSIXACL;
 
 	err = -ENOMEM;
-	root_dentry = d_make_root(ovl_new_inode(sb, S_IFDIR, 0));
+	root_dentry = ovl_get_root(sb, upperpath.dentry, oe);
 	if (!root_dentry)
 		goto out_free_oe;
 
-	root_dentry->d_fsdata = oe;
-
 	mntput(upperpath.mnt);
-	if (upperpath.dentry) {
-		ovl_dentry_set_upper_alias(root_dentry);
-		if (ovl_is_impuredir(upperpath.dentry))
-			ovl_set_flag(OVL_IMPURE, d_inode(root_dentry));
-	}
-
-	/* Root is always merge -> can have whiteouts */
-	ovl_set_flag(OVL_WHITEOUTS, d_inode(root_dentry));
-	ovl_dentry_set_flag(OVL_E_CONNECTED, root_dentry);
-	ovl_set_upperdata(d_inode(root_dentry));
-	ovl_inode_init(d_inode(root_dentry), upperpath.dentry,
-		       ovl_dentry_lower(root_dentry), NULL);
 
 	sb->s_root = root_dentry;
 
diff --git a/fs/overlayfs/util.c b/fs/overlayfs/util.c
index 042f7eb..36b6078 100644
--- a/fs/overlayfs/util.c
+++ b/fs/overlayfs/util.c
@@ -93,8 +93,24 @@ struct ovl_entry *ovl_alloc_entry(unsigned int numlower)
 bool ovl_dentry_remote(struct dentry *dentry)
 {
 	return dentry->d_flags &
-		(DCACHE_OP_REVALIDATE | DCACHE_OP_WEAK_REVALIDATE |
-		 DCACHE_OP_REAL);
+		(DCACHE_OP_REVALIDATE | DCACHE_OP_WEAK_REVALIDATE);
+}
+
+void ovl_dentry_update_reval(struct dentry *dentry, struct dentry *upperdentry,
+			     unsigned int mask)
+{
+	struct ovl_entry *oe = OVL_E(dentry);
+	unsigned int i, flags = 0;
+
+	if (upperdentry)
+		flags |= upperdentry->d_flags;
+	for (i = 0; i < oe->numlower; i++)
+		flags |= oe->lowerstack[i].dentry->d_flags;
+
+	spin_lock(&dentry->d_lock);
+	dentry->d_flags &= ~mask;
+	dentry->d_flags |= flags & mask;
+	spin_unlock(&dentry->d_lock);
 }
 
 bool ovl_dentry_weird(struct dentry *dentry)
@@ -386,24 +402,6 @@ void ovl_dentry_set_redirect(struct dentry *dentry, const char *redirect)
 	oi->redirect = redirect;
 }
 
-void ovl_inode_init(struct inode *inode, struct dentry *upperdentry,
-		    struct dentry *lowerdentry, struct dentry *lowerdata)
-{
-	struct inode *realinode = d_inode(upperdentry ?: lowerdentry);
-
-	if (upperdentry)
-		OVL_I(inode)->__upperdentry = upperdentry;
-	if (lowerdentry)
-		OVL_I(inode)->lower = igrab(d_inode(lowerdentry));
-	if (lowerdata)
-		OVL_I(inode)->lowerdata = igrab(d_inode(lowerdata));
-
-	ovl_copyattr(realinode, inode);
-	ovl_copyflags(realinode, inode);
-	if (!inode->i_ino)
-		inode->i_ino = realinode->i_ino;
-}
-
 void ovl_inode_update(struct inode *inode, struct dentry *upperdentry)
 {
 	struct inode *upperinode = d_inode(upperdentry);
@@ -416,8 +414,6 @@ void ovl_inode_update(struct inode *inode, struct dentry *upperdentry)
 	smp_wmb();
 	OVL_I(inode)->__upperdentry = upperdentry;
 	if (inode_unhashed(inode)) {
-		if (!inode->i_ino)
-			inode->i_ino = upperinode->i_ino;
 		inode->i_private = upperinode;
 		__insert_inode_hash(inode, (unsigned long) upperinode);
 	}
diff --git a/fs/proc/array.c b/fs/proc/array.c
index 5efaf37..8e16f14 100644
--- a/fs/proc/array.c
+++ b/fs/proc/array.c
@@ -635,28 +635,35 @@ int proc_tgid_stat(struct seq_file *m, struct pid_namespace *ns,
 int proc_pid_statm(struct seq_file *m, struct pid_namespace *ns,
 			struct pid *pid, struct task_struct *task)
 {
-	unsigned long size = 0, resident = 0, shared = 0, text = 0, data = 0;
 	struct mm_struct *mm = get_task_mm(task);
 
 	if (mm) {
+		unsigned long size;
+		unsigned long resident = 0;
+		unsigned long shared = 0;
+		unsigned long text = 0;
+		unsigned long data = 0;
+
 		size = task_statm(mm, &shared, &text, &data, &resident);
 		mmput(mm);
-	}
-	/*
-	 * For quick read, open code by putting numbers directly
-	 * expected format is
-	 * seq_printf(m, "%lu %lu %lu %lu 0 %lu 0\n",
-	 *               size, resident, shared, text, data);
-	 */
-	seq_put_decimal_ull(m, "", size);
-	seq_put_decimal_ull(m, " ", resident);
-	seq_put_decimal_ull(m, " ", shared);
-	seq_put_decimal_ull(m, " ", text);
-	seq_put_decimal_ull(m, " ", 0);
-	seq_put_decimal_ull(m, " ", data);
-	seq_put_decimal_ull(m, " ", 0);
-	seq_putc(m, '\n');
 
+		/*
+		 * For quick read, open code by putting numbers directly
+		 * expected format is
+		 * seq_printf(m, "%lu %lu %lu %lu 0 %lu 0\n",
+		 *               size, resident, shared, text, data);
+		 */
+		seq_put_decimal_ull(m, "", size);
+		seq_put_decimal_ull(m, " ", resident);
+		seq_put_decimal_ull(m, " ", shared);
+		seq_put_decimal_ull(m, " ", text);
+		seq_put_decimal_ull(m, " ", 0);
+		seq_put_decimal_ull(m, " ", data);
+		seq_put_decimal_ull(m, " ", 0);
+		seq_putc(m, '\n');
+	} else {
+		seq_write(m, "0 0 0 0 0 0 0\n", 14);
+	}
 	return 0;
 }
 
diff --git a/fs/proc/base.c b/fs/proc/base.c
index 74f948a..572898d 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -1573,6 +1573,7 @@ static ssize_t timens_offsets_write(struct file *file, const char __user *buf,
 	noffsets = 0;
 	for (pos = kbuf; pos; pos = next_line) {
 		struct proc_timens_offset *off = &offsets[noffsets];
+		char clock[10];
 		int err;
 
 		/* Find the end of line and ensure we don't look past it */
@@ -1584,10 +1585,21 @@ static ssize_t timens_offsets_write(struct file *file, const char __user *buf,
 				next_line = NULL;
 		}
 
-		err = sscanf(pos, "%u %lld %lu", &off->clockid,
+		err = sscanf(pos, "%9s %lld %lu", clock,
 				&off->val.tv_sec, &off->val.tv_nsec);
 		if (err != 3 || off->val.tv_nsec >= NSEC_PER_SEC)
 			goto out;
+
+		clock[sizeof(clock) - 1] = 0;
+		if (strcmp(clock, "monotonic") == 0 ||
+		    strcmp(clock, __stringify(CLOCK_MONOTONIC)) == 0)
+			off->clockid = CLOCK_MONOTONIC;
+		else if (strcmp(clock, "boottime") == 0 ||
+			 strcmp(clock, __stringify(CLOCK_BOOTTIME)) == 0)
+			off->clockid = CLOCK_BOOTTIME;
+		else
+			goto out;
+
 		noffsets++;
 		if (noffsets == ARRAY_SIZE(offsets)) {
 			if (next_line)
@@ -1839,9 +1851,9 @@ void proc_pid_evict_inode(struct proc_inode *ei)
 	struct pid *pid = ei->pid;
 
 	if (S_ISDIR(ei->vfs_inode.i_mode)) {
-		spin_lock(&pid->wait_pidfd.lock);
+		spin_lock(&pid->lock);
 		hlist_del_init_rcu(&ei->sibling_inodes);
-		spin_unlock(&pid->wait_pidfd.lock);
+		spin_unlock(&pid->lock);
 	}
 
 	put_pid(pid);
@@ -1877,9 +1889,9 @@ struct inode *proc_pid_make_inode(struct super_block * sb,
 	/* Let the pid remember us for quick removal */
 	ei->pid = pid;
 	if (S_ISDIR(mode)) {
-		spin_lock(&pid->wait_pidfd.lock);
+		spin_lock(&pid->lock);
 		hlist_add_head_rcu(&ei->sibling_inodes, &pid->inodes);
-		spin_unlock(&pid->wait_pidfd.lock);
+		spin_unlock(&pid->lock);
 	}
 
 	task_dump_owner(task, 0, &inode->i_uid, &inode->i_gid);
@@ -3273,7 +3285,7 @@ static const struct inode_operations proc_tgid_base_inode_operations = {
 
 void proc_flush_pid(struct pid *pid)
 {
-	proc_invalidate_siblings_dcache(&pid->inodes, &pid->wait_pidfd.lock);
+	proc_invalidate_siblings_dcache(&pid->inodes, &pid->lock);
 	put_pid(pid);
 }
 
diff --git a/fs/proc/cpuinfo.c b/fs/proc/cpuinfo.c
index c1dea9b..d0989a4 100644
--- a/fs/proc/cpuinfo.c
+++ b/fs/proc/cpuinfo.c
@@ -17,6 +17,7 @@ static int cpuinfo_open(struct inode *inode, struct file *file)
 }
 
 static const struct proc_ops cpuinfo_proc_ops = {
+	.proc_flags	= PROC_ENTRY_PERMANENT,
 	.proc_open	= cpuinfo_open,
 	.proc_read	= seq_read,
 	.proc_lseek	= seq_lseek,
diff --git a/fs/proc/generic.c b/fs/proc/generic.c
index 3faed94..4ed6dab 100644
--- a/fs/proc/generic.c
+++ b/fs/proc/generic.c
@@ -531,6 +531,12 @@ struct proc_dir_entry *proc_create_reg(const char *name, umode_t mode,
 	return p;
 }
 
+static inline void pde_set_flags(struct proc_dir_entry *pde)
+{
+	if (pde->proc_ops->proc_flags & PROC_ENTRY_PERMANENT)
+		pde->flags |= PROC_ENTRY_PERMANENT;
+}
+
 struct proc_dir_entry *proc_create_data(const char *name, umode_t mode,
 		struct proc_dir_entry *parent,
 		const struct proc_ops *proc_ops, void *data)
@@ -541,6 +547,7 @@ struct proc_dir_entry *proc_create_data(const char *name, umode_t mode,
 	if (!p)
 		return NULL;
 	p->proc_ops = proc_ops;
+	pde_set_flags(p);
 	return proc_register(parent, p);
 }
 EXPORT_SYMBOL(proc_create_data);
@@ -572,6 +579,7 @@ static int proc_seq_release(struct inode *inode, struct file *file)
 }
 
 static const struct proc_ops proc_seq_ops = {
+	/* not permanent -- can call into arbitrary seq_operations */
 	.proc_open	= proc_seq_open,
 	.proc_read	= seq_read,
 	.proc_lseek	= seq_lseek,
@@ -602,6 +610,7 @@ static int proc_single_open(struct inode *inode, struct file *file)
 }
 
 static const struct proc_ops proc_single_ops = {
+	/* not permanent -- can call into arbitrary ->single_show */
 	.proc_open	= proc_single_open,
 	.proc_read	= seq_read,
 	.proc_lseek	= seq_lseek,
@@ -662,9 +671,13 @@ void remove_proc_entry(const char *name, struct proc_dir_entry *parent)
 
 	de = pde_subdir_find(parent, fn, len);
 	if (de) {
-		rb_erase(&de->subdir_node, &parent->subdir);
-		if (S_ISDIR(de->mode)) {
-			parent->nlink--;
+		if (unlikely(pde_is_permanent(de))) {
+			WARN(1, "removing permanent /proc entry '%s'", de->name);
+			de = NULL;
+		} else {
+			rb_erase(&de->subdir_node, &parent->subdir);
+			if (S_ISDIR(de->mode))
+				parent->nlink--;
 		}
 	}
 	write_unlock(&proc_subdir_lock);
@@ -700,12 +713,24 @@ int remove_proc_subtree(const char *name, struct proc_dir_entry *parent)
 		write_unlock(&proc_subdir_lock);
 		return -ENOENT;
 	}
+	if (unlikely(pde_is_permanent(root))) {
+		write_unlock(&proc_subdir_lock);
+		WARN(1, "removing permanent /proc entry '%s/%s'",
+			root->parent->name, root->name);
+		return -EINVAL;
+	}
 	rb_erase(&root->subdir_node, &parent->subdir);
 
 	de = root;
 	while (1) {
 		next = pde_subdir_first(de);
 		if (next) {
+			if (unlikely(pde_is_permanent(root))) {
+				write_unlock(&proc_subdir_lock);
+				WARN(1, "removing permanent /proc entry '%s/%s'",
+					next->parent->name, next->name);
+				return -EINVAL;
+			}
 			rb_erase(&next->subdir_node, &de->subdir);
 			de = next;
 			continue;
diff --git a/fs/proc/inode.c b/fs/proc/inode.c
index 1e730ea..fb4cace 100644
--- a/fs/proc/inode.c
+++ b/fs/proc/inode.c
@@ -202,6 +202,7 @@ static void unuse_pde(struct proc_dir_entry *pde)
 
 /* pde is locked on entry, unlocked on exit */
 static void close_pdeo(struct proc_dir_entry *pde, struct pde_opener *pdeo)
+	__releases(&pde->pde_unload_lock)
 {
 	/*
 	 * close() (proc_reg_release()) can't delete an entry and proceed:
@@ -258,115 +259,193 @@ void proc_entry_rundown(struct proc_dir_entry *de)
 	spin_unlock(&de->pde_unload_lock);
 }
 
+static loff_t pde_lseek(struct proc_dir_entry *pde, struct file *file, loff_t offset, int whence)
+{
+	typeof_member(struct proc_ops, proc_lseek) lseek;
+
+	lseek = pde->proc_ops->proc_lseek;
+	if (!lseek)
+		lseek = default_llseek;
+	return lseek(file, offset, whence);
+}
+
 static loff_t proc_reg_llseek(struct file *file, loff_t offset, int whence)
 {
 	struct proc_dir_entry *pde = PDE(file_inode(file));
 	loff_t rv = -EINVAL;
-	if (use_pde(pde)) {
-		typeof_member(struct proc_ops, proc_lseek) lseek;
 
-		lseek = pde->proc_ops->proc_lseek;
-		if (!lseek)
-			lseek = default_llseek;
-		rv = lseek(file, offset, whence);
+	if (pde_is_permanent(pde)) {
+		return pde_lseek(pde, file, offset, whence);
+	} else if (use_pde(pde)) {
+		rv = pde_lseek(pde, file, offset, whence);
 		unuse_pde(pde);
 	}
 	return rv;
 }
 
+static ssize_t pde_read(struct proc_dir_entry *pde, struct file *file, char __user *buf, size_t count, loff_t *ppos)
+{
+	typeof_member(struct proc_ops, proc_read) read;
+
+	read = pde->proc_ops->proc_read;
+	if (read)
+		return read(file, buf, count, ppos);
+	return -EIO;
+}
+
 static ssize_t proc_reg_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
 {
 	struct proc_dir_entry *pde = PDE(file_inode(file));
 	ssize_t rv = -EIO;
-	if (use_pde(pde)) {
-		typeof_member(struct proc_ops, proc_read) read;
 
-		read = pde->proc_ops->proc_read;
-		if (read)
-			rv = read(file, buf, count, ppos);
+	if (pde_is_permanent(pde)) {
+		return pde_read(pde, file, buf, count, ppos);
+	} else if (use_pde(pde)) {
+		rv = pde_read(pde, file, buf, count, ppos);
 		unuse_pde(pde);
 	}
 	return rv;
 }
 
+static ssize_t pde_write(struct proc_dir_entry *pde, struct file *file, const char __user *buf, size_t count, loff_t *ppos)
+{
+	typeof_member(struct proc_ops, proc_write) write;
+
+	write = pde->proc_ops->proc_write;
+	if (write)
+		return write(file, buf, count, ppos);
+	return -EIO;
+}
+
 static ssize_t proc_reg_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
 {
 	struct proc_dir_entry *pde = PDE(file_inode(file));
 	ssize_t rv = -EIO;
-	if (use_pde(pde)) {
-		typeof_member(struct proc_ops, proc_write) write;
 
-		write = pde->proc_ops->proc_write;
-		if (write)
-			rv = write(file, buf, count, ppos);
+	if (pde_is_permanent(pde)) {
+		return pde_write(pde, file, buf, count, ppos);
+	} else if (use_pde(pde)) {
+		rv = pde_write(pde, file, buf, count, ppos);
 		unuse_pde(pde);
 	}
 	return rv;
 }
 
+static __poll_t pde_poll(struct proc_dir_entry *pde, struct file *file, struct poll_table_struct *pts)
+{
+	typeof_member(struct proc_ops, proc_poll) poll;
+
+	poll = pde->proc_ops->proc_poll;
+	if (poll)
+		return poll(file, pts);
+	return DEFAULT_POLLMASK;
+}
+
 static __poll_t proc_reg_poll(struct file *file, struct poll_table_struct *pts)
 {
 	struct proc_dir_entry *pde = PDE(file_inode(file));
 	__poll_t rv = DEFAULT_POLLMASK;
-	if (use_pde(pde)) {
-		typeof_member(struct proc_ops, proc_poll) poll;
 
-		poll = pde->proc_ops->proc_poll;
-		if (poll)
-			rv = poll(file, pts);
+	if (pde_is_permanent(pde)) {
+		return pde_poll(pde, file, pts);
+	} else if (use_pde(pde)) {
+		rv = pde_poll(pde, file, pts);
 		unuse_pde(pde);
 	}
 	return rv;
 }
 
+static long pde_ioctl(struct proc_dir_entry *pde, struct file *file, unsigned int cmd, unsigned long arg)
+{
+	typeof_member(struct proc_ops, proc_ioctl) ioctl;
+
+	ioctl = pde->proc_ops->proc_ioctl;
+	if (ioctl)
+		return ioctl(file, cmd, arg);
+	return -ENOTTY;
+}
+
 static long proc_reg_unlocked_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	struct proc_dir_entry *pde = PDE(file_inode(file));
 	long rv = -ENOTTY;
-	if (use_pde(pde)) {
-		typeof_member(struct proc_ops, proc_ioctl) ioctl;
 
-		ioctl = pde->proc_ops->proc_ioctl;
-		if (ioctl)
-			rv = ioctl(file, cmd, arg);
+	if (pde_is_permanent(pde)) {
+		return pde_ioctl(pde, file, cmd, arg);
+	} else if (use_pde(pde)) {
+		rv = pde_ioctl(pde, file, cmd, arg);
 		unuse_pde(pde);
 	}
 	return rv;
 }
 
 #ifdef CONFIG_COMPAT
+static long pde_compat_ioctl(struct proc_dir_entry *pde, struct file *file, unsigned int cmd, unsigned long arg)
+{
+	typeof_member(struct proc_ops, proc_compat_ioctl) compat_ioctl;
+
+	compat_ioctl = pde->proc_ops->proc_compat_ioctl;
+	if (compat_ioctl)
+		return compat_ioctl(file, cmd, arg);
+	return -ENOTTY;
+}
+
 static long proc_reg_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	struct proc_dir_entry *pde = PDE(file_inode(file));
 	long rv = -ENOTTY;
-	if (use_pde(pde)) {
-		typeof_member(struct proc_ops, proc_compat_ioctl) compat_ioctl;
-
-		compat_ioctl = pde->proc_ops->proc_compat_ioctl;
-		if (compat_ioctl)
-			rv = compat_ioctl(file, cmd, arg);
+	if (pde_is_permanent(pde)) {
+		return pde_compat_ioctl(pde, file, cmd, arg);
+	} else if (use_pde(pde)) {
+		rv = pde_compat_ioctl(pde, file, cmd, arg);
 		unuse_pde(pde);
 	}
 	return rv;
 }
 #endif
 
+static int pde_mmap(struct proc_dir_entry *pde, struct file *file, struct vm_area_struct *vma)
+{
+	typeof_member(struct proc_ops, proc_mmap) mmap;
+
+	mmap = pde->proc_ops->proc_mmap;
+	if (mmap)
+		return mmap(file, vma);
+	return -EIO;
+}
+
 static int proc_reg_mmap(struct file *file, struct vm_area_struct *vma)
 {
 	struct proc_dir_entry *pde = PDE(file_inode(file));
 	int rv = -EIO;
-	if (use_pde(pde)) {
-		typeof_member(struct proc_ops, proc_mmap) mmap;
 
-		mmap = pde->proc_ops->proc_mmap;
-		if (mmap)
-			rv = mmap(file, vma);
+	if (pde_is_permanent(pde)) {
+		return pde_mmap(pde, file, vma);
+	} else if (use_pde(pde)) {
+		rv = pde_mmap(pde, file, vma);
 		unuse_pde(pde);
 	}
 	return rv;
 }
 
 static unsigned long
+pde_get_unmapped_area(struct proc_dir_entry *pde, struct file *file, unsigned long orig_addr,
+			   unsigned long len, unsigned long pgoff,
+			   unsigned long flags)
+{
+	typeof_member(struct proc_ops, proc_get_unmapped_area) get_area;
+
+	get_area = pde->proc_ops->proc_get_unmapped_area;
+#ifdef CONFIG_MMU
+	if (!get_area)
+		get_area = current->mm->get_unmapped_area;
+#endif
+	if (get_area)
+		return get_area(file, orig_addr, len, pgoff, flags);
+	return orig_addr;
+}
+
+static unsigned long
 proc_reg_get_unmapped_area(struct file *file, unsigned long orig_addr,
 			   unsigned long len, unsigned long pgoff,
 			   unsigned long flags)
@@ -374,19 +453,10 @@ proc_reg_get_unmapped_area(struct file *file, unsigned long orig_addr,
 	struct proc_dir_entry *pde = PDE(file_inode(file));
 	unsigned long rv = -EIO;
 
-	if (use_pde(pde)) {
-		typeof_member(struct proc_ops, proc_get_unmapped_area) get_area;
-
-		get_area = pde->proc_ops->proc_get_unmapped_area;
-#ifdef CONFIG_MMU
-		if (!get_area)
-			get_area = current->mm->get_unmapped_area;
-#endif
-
-		if (get_area)
-			rv = get_area(file, orig_addr, len, pgoff, flags);
-		else
-			rv = orig_addr;
+	if (pde_is_permanent(pde)) {
+		return pde_get_unmapped_area(pde, file, orig_addr, len, pgoff, flags);
+	} else if (use_pde(pde)) {
+		rv = pde_get_unmapped_area(pde, file, orig_addr, len, pgoff, flags);
 		unuse_pde(pde);
 	}
 	return rv;
@@ -400,6 +470,13 @@ static int proc_reg_open(struct inode *inode, struct file *file)
 	typeof_member(struct proc_ops, proc_release) release;
 	struct pde_opener *pdeo;
 
+	if (pde_is_permanent(pde)) {
+		open = pde->proc_ops->proc_open;
+		if (open)
+			rv = open(inode, file);
+		return rv;
+	}
+
 	/*
 	 * Ensure that
 	 * 1) PDE's ->release hook will be called no matter what
@@ -449,6 +526,17 @@ static int proc_reg_release(struct inode *inode, struct file *file)
 {
 	struct proc_dir_entry *pde = PDE(inode);
 	struct pde_opener *pdeo;
+
+	if (pde_is_permanent(pde)) {
+		typeof_member(struct proc_ops, proc_release) release;
+
+		release = pde->proc_ops->proc_release;
+		if (release) {
+			return release(inode, file);
+		}
+		return 0;
+	}
+
 	spin_lock(&pde->pde_unload_lock);
 	list_for_each_entry(pdeo, &pde->pde_openers, lh) {
 		if (pdeo->file == file) {
diff --git a/fs/proc/internal.h b/fs/proc/internal.h
index 9e294f0..917cc85 100644
--- a/fs/proc/internal.h
+++ b/fs/proc/internal.h
@@ -61,6 +61,7 @@ struct proc_dir_entry {
 	struct rb_node subdir_node;
 	char *name;
 	umode_t mode;
+	u8 flags;
 	u8 namelen;
 	char inline_name[];
 } __randomize_layout;
@@ -73,6 +74,11 @@ struct proc_dir_entry {
 	0)
 #define SIZEOF_PDE_INLINE_NAME (SIZEOF_PDE - sizeof(struct proc_dir_entry))
 
+static inline bool pde_is_permanent(const struct proc_dir_entry *pde)
+{
+	return pde->flags & PROC_ENTRY_PERMANENT;
+}
+
 extern struct kmem_cache *proc_dir_entry_cache;
 void pde_free(struct proc_dir_entry *pde);
 
diff --git a/fs/proc/kmsg.c b/fs/proc/kmsg.c
index ec1b7d2..b38ad55 100644
--- a/fs/proc/kmsg.c
+++ b/fs/proc/kmsg.c
@@ -50,6 +50,7 @@ static __poll_t kmsg_poll(struct file *file, poll_table *wait)
 
 
 static const struct proc_ops kmsg_proc_ops = {
+	.proc_flags	= PROC_ENTRY_PERMANENT,
 	.proc_read	= kmsg_read,
 	.proc_poll	= kmsg_poll,
 	.proc_open	= kmsg_open,
diff --git a/fs/proc/root.c b/fs/proc/root.c
index 2633f10..cdbe929 100644
--- a/fs/proc/root.c
+++ b/fs/proc/root.c
@@ -196,6 +196,13 @@ static void proc_kill_sb(struct super_block *sb)
 	if (ns->proc_thread_self)
 		dput(ns->proc_thread_self);
 	kill_anon_super(sb);
+
+	/* Make the pid namespace safe for the next mount of proc */
+	ns->proc_self = NULL;
+	ns->proc_thread_self = NULL;
+	ns->pid_gid = GLOBAL_ROOT_GID;
+	ns->hide_pid = 0;
+
 	put_pid_ns(ns);
 }
 
diff --git a/fs/proc/stat.c b/fs/proc/stat.c
index 0449edf..46b3293 100644
--- a/fs/proc/stat.c
+++ b/fs/proc/stat.c
@@ -224,6 +224,7 @@ static int stat_open(struct inode *inode, struct file *file)
 }
 
 static const struct proc_ops stat_proc_ops = {
+	.proc_flags	= PROC_ENTRY_PERMANENT,
 	.proc_open	= stat_open,
 	.proc_read	= seq_read,
 	.proc_lseek	= seq_lseek,
diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
index 3ba9ae8..8d382d4 100644
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -123,38 +123,14 @@ static void release_task_mempolicy(struct proc_maps_private *priv)
 }
 #endif
 
-static void vma_stop(struct proc_maps_private *priv)
-{
-	struct mm_struct *mm = priv->mm;
-
-	release_task_mempolicy(priv);
-	up_read(&mm->mmap_sem);
-	mmput(mm);
-}
-
-static struct vm_area_struct *
-m_next_vma(struct proc_maps_private *priv, struct vm_area_struct *vma)
-{
-	if (vma == priv->tail_vma)
-		return NULL;
-	return vma->vm_next ?: priv->tail_vma;
-}
-
-static void m_cache_vma(struct seq_file *m, struct vm_area_struct *vma)
-{
-	if (m->count < m->size)	/* vma is copied successfully */
-		m->version = m_next_vma(m->private, vma) ? vma->vm_end : -1UL;
-}
-
 static void *m_start(struct seq_file *m, loff_t *ppos)
 {
 	struct proc_maps_private *priv = m->private;
-	unsigned long last_addr = m->version;
+	unsigned long last_addr = *ppos;
 	struct mm_struct *mm;
 	struct vm_area_struct *vma;
-	unsigned int pos = *ppos;
 
-	/* See m_cache_vma(). Zero at the start or after lseek. */
+	/* See m_next(). Zero at the start or after lseek. */
 	if (last_addr == -1UL)
 		return NULL;
 
@@ -163,64 +139,59 @@ static void *m_start(struct seq_file *m, loff_t *ppos)
 		return ERR_PTR(-ESRCH);
 
 	mm = priv->mm;
-	if (!mm || !mmget_not_zero(mm))
+	if (!mm || !mmget_not_zero(mm)) {
+		put_task_struct(priv->task);
+		priv->task = NULL;
 		return NULL;
+	}
 
 	if (down_read_killable(&mm->mmap_sem)) {
 		mmput(mm);
+		put_task_struct(priv->task);
+		priv->task = NULL;
 		return ERR_PTR(-EINTR);
 	}
 
 	hold_task_mempolicy(priv);
 	priv->tail_vma = get_gate_vma(mm);
 
-	if (last_addr) {
-		vma = find_vma(mm, last_addr - 1);
-		if (vma && vma->vm_start <= last_addr)
-			vma = m_next_vma(priv, vma);
-		if (vma)
-			return vma;
-	}
-
-	m->version = 0;
-	if (pos < mm->map_count) {
-		for (vma = mm->mmap; pos; pos--) {
-			m->version = vma->vm_start;
-			vma = vma->vm_next;
-		}
+	vma = find_vma(mm, last_addr);
+	if (vma)
 		return vma;
-	}
 
-	/* we do not bother to update m->version in this case */
-	if (pos == mm->map_count && priv->tail_vma)
-		return priv->tail_vma;
-
-	vma_stop(priv);
-	return NULL;
+	return priv->tail_vma;
 }
 
-static void *m_next(struct seq_file *m, void *v, loff_t *pos)
+static void *m_next(struct seq_file *m, void *v, loff_t *ppos)
 {
 	struct proc_maps_private *priv = m->private;
-	struct vm_area_struct *next;
+	struct vm_area_struct *next, *vma = v;
 
-	(*pos)++;
-	next = m_next_vma(priv, v);
-	if (!next)
-		vma_stop(priv);
+	if (vma == priv->tail_vma)
+		next = NULL;
+	else if (vma->vm_next)
+		next = vma->vm_next;
+	else
+		next = priv->tail_vma;
+
+	*ppos = next ? next->vm_start : -1UL;
+
 	return next;
 }
 
 static void m_stop(struct seq_file *m, void *v)
 {
 	struct proc_maps_private *priv = m->private;
+	struct mm_struct *mm = priv->mm;
 
-	if (!IS_ERR_OR_NULL(v))
-		vma_stop(priv);
-	if (priv->task) {
-		put_task_struct(priv->task);
-		priv->task = NULL;
-	}
+	if (!priv->task)
+		return;
+
+	release_task_mempolicy(priv);
+	up_read(&mm->mmap_sem);
+	mmput(mm);
+	put_task_struct(priv->task);
+	priv->task = NULL;
 }
 
 static int proc_maps_open(struct inode *inode, struct file *file,
@@ -363,7 +334,6 @@ show_map_vma(struct seq_file *m, struct vm_area_struct *vma)
 static int show_map(struct seq_file *m, void *v)
 {
 	show_map_vma(m, v);
-	m_cache_vma(m, v);
 	return 0;
 }
 
@@ -847,8 +817,6 @@ static int show_smap(struct seq_file *m, void *v)
 		seq_printf(m, "ProtectionKey:  %8u\n", vma_pkey(vma));
 	show_smap_vma_flags(m, vma);
 
-	m_cache_vma(m, vma);
-
 	return 0;
 }
 
@@ -1887,7 +1855,6 @@ static int show_numa_map(struct seq_file *m, void *v)
 	seq_printf(m, " kernelpagesize_kB=%lu", vma_kernel_pagesize(vma) >> 10);
 out:
 	seq_putc(m, '\n');
-	m_cache_vma(m, vma);
 	return 0;
 }
 
diff --git a/fs/read_write.c b/fs/read_write.c
index 59d819c..bbfa9b1 100644
--- a/fs/read_write.c
+++ b/fs/read_write.c
@@ -331,7 +331,8 @@ COMPAT_SYSCALL_DEFINE3(lseek, unsigned int, fd, compat_off_t, offset, unsigned i
 }
 #endif
 
-#if !defined(CONFIG_64BIT) || defined(CONFIG_COMPAT)
+#if !defined(CONFIG_64BIT) || defined(CONFIG_COMPAT) || \
+	defined(__ARCH_WANT_SYS_LLSEEK)
 SYSCALL_DEFINE5(llseek, unsigned int, fd, unsigned long, offset_high,
 		unsigned long, offset_low, loff_t __user *, result,
 		unsigned int, whence)
diff --git a/fs/reiserfs/do_balan.c b/fs/reiserfs/do_balan.c
index 4075e41..5129efc 100644
--- a/fs/reiserfs/do_balan.c
+++ b/fs/reiserfs/do_balan.c
@@ -842,7 +842,7 @@ static void balance_leaf_paste_right_whole(struct tree_balance *tb,
 	struct item_head *pasted;
 	struct buffer_info bi;
 
-							buffer_info_init_right(tb, &bi);
+	buffer_info_init_right(tb, &bi);
 	leaf_shift_right(tb, tb->rnum[0], tb->rbytes);
 
 	/* append item in R[0] */
diff --git a/fs/reiserfs/ioctl.c b/fs/reiserfs/ioctl.c
index 45e1a5d..adb21be 100644
--- a/fs/reiserfs/ioctl.c
+++ b/fs/reiserfs/ioctl.c
@@ -184,11 +184,12 @@ int reiserfs_unpack(struct inode *inode, struct file *filp)
 	}
 
 	/* we need to make sure nobody is changing the file size beneath us */
-{
-	int depth = reiserfs_write_unlock_nested(inode->i_sb);
-	inode_lock(inode);
-	reiserfs_write_lock_nested(inode->i_sb, depth);
-}
+	{
+		int depth = reiserfs_write_unlock_nested(inode->i_sb);
+
+		inode_lock(inode);
+		reiserfs_write_lock_nested(inode->i_sb, depth);
+	}
 
 	reiserfs_write_lock(inode->i_sb);
 
diff --git a/fs/reiserfs/namei.c b/fs/reiserfs/namei.c
index 959a066..1594687 100644
--- a/fs/reiserfs/namei.c
+++ b/fs/reiserfs/namei.c
@@ -838,10 +838,10 @@ static int reiserfs_mkdir(struct inode *dir, struct dentry *dentry, umode_t mode
 	 */
 	INC_DIR_INODE_NLINK(dir)
 
-	    retval = reiserfs_new_inode(&th, dir, mode, NULL /*symlink */ ,
-					old_format_only(dir->i_sb) ?
-					EMPTY_DIR_SIZE_V1 : EMPTY_DIR_SIZE,
-					dentry, inode, &security);
+	retval = reiserfs_new_inode(&th, dir, mode, NULL /*symlink */,
+				    old_format_only(dir->i_sb) ?
+				    EMPTY_DIR_SIZE_V1 : EMPTY_DIR_SIZE,
+				    dentry, inode, &security);
 	if (retval) {
 		DEC_DIR_INODE_NLINK(dir)
 		goto out_failed;
@@ -967,7 +967,7 @@ static int reiserfs_rmdir(struct inode *dir, struct dentry *dentry)
 	reiserfs_update_sd(&th, inode);
 
 	DEC_DIR_INODE_NLINK(dir)
-	    dir->i_size -= (DEH_SIZE + de.de_entrylen);
+	dir->i_size -= (DEH_SIZE + de.de_entrylen);
 	reiserfs_update_sd(&th, dir);
 
 	/* prevent empty directory from getting lost */
diff --git a/fs/seq_file.c b/fs/seq_file.c
index 1600034..70f5fdf 100644
--- a/fs/seq_file.c
+++ b/fs/seq_file.c
@@ -68,13 +68,6 @@ int seq_open(struct file *file, const struct seq_operations *op)
 	p->file = file;
 
 	/*
-	 * Wrappers around seq_open(e.g. swaps_open) need to be
-	 * aware of this. If they set f_version themselves, they
-	 * should call seq_open first and then set f_version.
-	 */
-	file->f_version = 0;
-
-	/*
 	 * seq_files support lseek() and pread().  They do not implement
 	 * write() at all, but we clear FMODE_PWRITE here for historical
 	 * reasons.
@@ -94,7 +87,6 @@ static int traverse(struct seq_file *m, loff_t offset)
 	int error = 0;
 	void *p;
 
-	m->version = 0;
 	m->index = 0;
 	m->count = m->from = 0;
 	if (!offset)
@@ -161,25 +153,11 @@ ssize_t seq_read(struct file *file, char __user *buf, size_t size, loff_t *ppos)
 	mutex_lock(&m->lock);
 
 	/*
-	 * seq_file->op->..m_start/m_stop/m_next may do special actions
-	 * or optimisations based on the file->f_version, so we want to
-	 * pass the file->f_version to those methods.
-	 *
-	 * seq_file->version is just copy of f_version, and seq_file
-	 * methods can treat it simply as file version.
-	 * It is copied in first and copied out after all operations.
-	 * It is convenient to have it as  part of structure to avoid the
-	 * need of passing another argument to all the seq_file methods.
-	 */
-	m->version = file->f_version;
-
-	/*
 	 * if request is to read from zero offset, reset iterator to first
 	 * record as it might have been already advanced by previous requests
 	 */
 	if (*ppos == 0) {
 		m->index = 0;
-		m->version = 0;
 		m->count = 0;
 	}
 
@@ -190,7 +168,6 @@ ssize_t seq_read(struct file *file, char __user *buf, size_t size, loff_t *ppos)
 		if (err) {
 			/* With prejudice... */
 			m->read_pos = 0;
-			m->version = 0;
 			m->index = 0;
 			m->count = 0;
 			goto Done;
@@ -243,7 +220,6 @@ ssize_t seq_read(struct file *file, char __user *buf, size_t size, loff_t *ppos)
 		m->buf = seq_buf_alloc(m->size <<= 1);
 		if (!m->buf)
 			goto Enomem;
-		m->version = 0;
 		p = m->op->start(m, &m->index);
 	}
 	m->op->stop(m, p);
@@ -256,9 +232,12 @@ ssize_t seq_read(struct file *file, char __user *buf, size_t size, loff_t *ppos)
 		loff_t pos = m->index;
 
 		p = m->op->next(m, p, &m->index);
-		if (pos == m->index)
-			/* Buggy ->next function */
+		if (pos == m->index) {
+			pr_info_ratelimited("buggy seq_file .next function %ps "
+				"did not updated position index\n",
+				m->op->next);
 			m->index++;
+		}
 		if (!p || IS_ERR(p)) {
 			err = PTR_ERR(p);
 			break;
@@ -287,7 +266,6 @@ ssize_t seq_read(struct file *file, char __user *buf, size_t size, loff_t *ppos)
 		*ppos += copied;
 		m->read_pos += copied;
 	}
-	file->f_version = m->version;
 	mutex_unlock(&m->lock);
 	return copied;
 Enomem:
@@ -313,7 +291,6 @@ loff_t seq_lseek(struct file *file, loff_t offset, int whence)
 	loff_t retval = -EINVAL;
 
 	mutex_lock(&m->lock);
-	m->version = file->f_version;
 	switch (whence) {
 	case SEEK_CUR:
 		offset += file->f_pos;
@@ -329,7 +306,6 @@ loff_t seq_lseek(struct file *file, loff_t offset, int whence)
 				/* with extreme prejudice... */
 				file->f_pos = 0;
 				m->read_pos = 0;
-				m->version = 0;
 				m->index = 0;
 				m->count = 0;
 			} else {
@@ -340,7 +316,6 @@ loff_t seq_lseek(struct file *file, loff_t offset, int whence)
 			file->f_pos = offset;
 		}
 	}
-	file->f_version = m->version;
 	mutex_unlock(&m->lock);
 	return retval;
 }
diff --git a/fs/sysfs/group.c b/fs/sysfs/group.c
index 5afe0e7..64e6a66 100644
--- a/fs/sysfs/group.c
+++ b/fs/sysfs/group.c
@@ -416,15 +416,18 @@ void sysfs_remove_link_from_group(struct kobject *kobj, const char *group_name,
 EXPORT_SYMBOL_GPL(sysfs_remove_link_from_group);
 
 /**
- * __compat_only_sysfs_link_entry_to_kobj - add a symlink to a kobject pointing
+ * compat_only_sysfs_link_entry_to_kobj - add a symlink to a kobject pointing
  * to a group or an attribute
  * @kobj:		The kobject containing the group.
  * @target_kobj:	The target kobject.
  * @target_name:	The name of the target group or attribute.
+ * @symlink_name:	The name of the symlink file (target_name will be
+ *			considered if symlink_name is NULL).
  */
-int __compat_only_sysfs_link_entry_to_kobj(struct kobject *kobj,
-				      struct kobject *target_kobj,
-				      const char *target_name)
+int compat_only_sysfs_link_entry_to_kobj(struct kobject *kobj,
+					 struct kobject *target_kobj,
+					 const char *target_name,
+					 const char *symlink_name)
 {
 	struct kernfs_node *target;
 	struct kernfs_node *entry;
@@ -449,15 +452,18 @@ int __compat_only_sysfs_link_entry_to_kobj(struct kobject *kobj,
 		return -ENOENT;
 	}
 
-	link = kernfs_create_link(kobj->sd, target_name, entry);
+	if (!symlink_name)
+		symlink_name = target_name;
+
+	link = kernfs_create_link(kobj->sd, symlink_name, entry);
 	if (PTR_ERR(link) == -EEXIST)
-		sysfs_warn_dup(kobj->sd, target_name);
+		sysfs_warn_dup(kobj->sd, symlink_name);
 
 	kernfs_put(entry);
 	kernfs_put(target);
 	return PTR_ERR_OR_ZERO(link);
 }
-EXPORT_SYMBOL_GPL(__compat_only_sysfs_link_entry_to_kobj);
+EXPORT_SYMBOL_GPL(compat_only_sysfs_link_entry_to_kobj);
 
 static int sysfs_group_attrs_change_owner(struct kernfs_node *grp_kn,
 					  const struct attribute_group *grp,
diff --git a/fs/ubifs/io.c b/fs/ubifs/io.c
index 8ceb514..7e4bfaf 100644
--- a/fs/ubifs/io.c
+++ b/fs/ubifs/io.c
@@ -225,7 +225,7 @@ int ubifs_is_mapped(const struct ubifs_info *c, int lnum)
 int ubifs_check_node(const struct ubifs_info *c, const void *buf, int lnum,
 		     int offs, int quiet, int must_chk_crc)
 {
-	int err = -EINVAL, type, node_len;
+	int err = -EINVAL, type, node_len, dump_node = 1;
 	uint32_t crc, node_crc, magic;
 	const struct ubifs_ch *ch = buf;
 
@@ -278,10 +278,22 @@ int ubifs_check_node(const struct ubifs_info *c, const void *buf, int lnum,
 out_len:
 	if (!quiet)
 		ubifs_err(c, "bad node length %d", node_len);
+	if (type == UBIFS_DATA_NODE && node_len > UBIFS_DATA_NODE_SZ)
+		dump_node = 0;
 out:
 	if (!quiet) {
 		ubifs_err(c, "bad node at LEB %d:%d", lnum, offs);
-		ubifs_dump_node(c, buf);
+		if (dump_node) {
+			ubifs_dump_node(c, buf);
+		} else {
+			int safe_len = min3(node_len, c->leb_size - offs,
+				(int)UBIFS_MAX_DATA_NODE_SZ);
+			pr_err("\tprevent out-of-bounds memory access\n");
+			pr_err("\ttruncated data node length      %d\n", safe_len);
+			pr_err("\tcorrupted data node:\n");
+			print_hex_dump(KERN_ERR, "\t", DUMP_PREFIX_OFFSET, 32, 1,
+					buf, safe_len, 0);
+		}
 		dump_stack();
 	}
 	return err;
diff --git a/fs/ubifs/journal.c b/fs/ubifs/journal.c
index 3bf8b1f..e5ec1af 100644
--- a/fs/ubifs/journal.c
+++ b/fs/ubifs/journal.c
@@ -905,6 +905,7 @@ int ubifs_jnl_write_inode(struct ubifs_info *c, const struct inode *inode)
 				ubifs_err(c, "dead directory entry '%s', error %d",
 					  xent->name, err);
 				ubifs_ro_mode(c, err);
+				kfree(xent);
 				goto out_release;
 			}
 			ubifs_assert(c, ubifs_inode(xino)->xattr);
diff --git a/fs/ubifs/orphan.c b/fs/ubifs/orphan.c
index edf43ddd..283f9eb 100644
--- a/fs/ubifs/orphan.c
+++ b/fs/ubifs/orphan.c
@@ -157,7 +157,7 @@ int ubifs_add_orphan(struct ubifs_info *c, ino_t inum)
 	int err = 0;
 	ino_t xattr_inum;
 	union ubifs_key key;
-	struct ubifs_dent_node *xent;
+	struct ubifs_dent_node *xent, *pxent = NULL;
 	struct fscrypt_name nm = {0};
 	struct ubifs_orphan *xattr_orphan;
 	struct ubifs_orphan *orphan;
@@ -181,11 +181,16 @@ int ubifs_add_orphan(struct ubifs_info *c, ino_t inum)
 		xattr_inum = le64_to_cpu(xent->inum);
 
 		xattr_orphan = orphan_add(c, xattr_inum, orphan);
-		if (IS_ERR(xattr_orphan))
+		if (IS_ERR(xattr_orphan)) {
+			kfree(xent);
 			return PTR_ERR(xattr_orphan);
+		}
 
+		kfree(pxent);
+		pxent = xent;
 		key_read(c, &xent->key, &key);
 	}
+	kfree(pxent);
 
 	return 0;
 }
@@ -688,14 +693,14 @@ static int do_kill_orphans(struct ubifs_info *c, struct ubifs_scan_leb *sleb,
 
 			ino_key_init(c, &key1, inum);
 			err = ubifs_tnc_lookup(c, &key1, ino);
-			if (err)
+			if (err && err != -ENOENT)
 				goto out_free;
 
 			/*
 			 * Check whether an inode can really get deleted.
 			 * linkat() with O_TMPFILE allows rebirth of an inode.
 			 */
-			if (ino->nlink == 0) {
+			if (err == 0 && ino->nlink == 0) {
 				dbg_rcvry("deleting orphaned inode %lu",
 					  (unsigned long)inum);
 
diff --git a/fs/udf/ecma_167.h b/fs/udf/ecma_167.h
index 3fd8546..736ebc5 100644
--- a/fs/udf/ecma_167.h
+++ b/fs/udf/ecma_167.h
@@ -5,7 +5,7 @@
  * http://www.ecma.ch
  *
  * Copyright (c) 2001-2002  Ben Fennema
- * Copyright (c) 2017-2019  Pali Rohár <pali.rohar@gmail.com>
+ * Copyright (c) 2017-2019  Pali Rohár <pali@kernel.org>
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
diff --git a/fs/udf/osta_udf.h b/fs/udf/osta_udf.h
index 35e61b2..d5fbfab 100644
--- a/fs/udf/osta_udf.h
+++ b/fs/udf/osta_udf.h
@@ -5,7 +5,7 @@
  * http://www.osta.org
  *
  * Copyright (c) 2001-2004  Ben Fennema
- * Copyright (c) 2017-2019  Pali Rohár <pali.rohar@gmail.com>
+ * Copyright (c) 2017-2019  Pali Rohár <pali@kernel.org>
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
diff --git a/fs/udf/udf_sb.h b/fs/udf/udf_sb.h
index 3d83be5..758efe5 100644
--- a/fs/udf/udf_sb.h
+++ b/fs/udf/udf_sb.h
@@ -83,7 +83,7 @@ struct udf_virtual_data {
 struct udf_bitmap {
 	__u32			s_extPosition;
 	int			s_nr_groups;
-	struct buffer_head 	*s_block_bitmap[0];
+	struct buffer_head	*s_block_bitmap[];
 };
 
 struct udf_part_map {
diff --git a/fs/unicode/.gitignore b/fs/unicode/.gitignore
index 0381e22..9b2467e 100644
--- a/fs/unicode/.gitignore
+++ b/fs/unicode/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 mkutf8data
 utf8data.h
diff --git a/fs/userfaultfd.c b/fs/userfaultfd.c
index 703c1c3..e39fdec 100644
--- a/fs/userfaultfd.c
+++ b/fs/userfaultfd.c
@@ -314,8 +314,11 @@ static inline bool userfaultfd_must_wait(struct userfaultfd_ctx *ctx,
 	if (!pmd_present(_pmd))
 		goto out;
 
-	if (pmd_trans_huge(_pmd))
+	if (pmd_trans_huge(_pmd)) {
+		if (!pmd_write(_pmd) && (reason & VM_UFFD_WP))
+			ret = true;
 		goto out;
+	}
 
 	/*
 	 * the pmd is stable (as in !pmd_trans_unstable) so we can re-read it
@@ -328,6 +331,8 @@ static inline bool userfaultfd_must_wait(struct userfaultfd_ctx *ctx,
 	 */
 	if (pte_none(*pte))
 		ret = true;
+	if (!pte_write(*pte) && (reason & VM_UFFD_WP))
+		ret = true;
 	pte_unmap(pte);
 
 out:
@@ -1287,10 +1292,13 @@ static __always_inline int validate_range(struct mm_struct *mm,
 	return 0;
 }
 
-static inline bool vma_can_userfault(struct vm_area_struct *vma)
+static inline bool vma_can_userfault(struct vm_area_struct *vma,
+				     unsigned long vm_flags)
 {
-	return vma_is_anonymous(vma) || is_vm_hugetlb_page(vma) ||
-		vma_is_shmem(vma);
+	/* FIXME: add WP support to hugetlbfs and shmem */
+	return vma_is_anonymous(vma) ||
+		((is_vm_hugetlb_page(vma) || vma_is_shmem(vma)) &&
+		 !(vm_flags & VM_UFFD_WP));
 }
 
 static int userfaultfd_register(struct userfaultfd_ctx *ctx,
@@ -1322,15 +1330,8 @@ static int userfaultfd_register(struct userfaultfd_ctx *ctx,
 	vm_flags = 0;
 	if (uffdio_register.mode & UFFDIO_REGISTER_MODE_MISSING)
 		vm_flags |= VM_UFFD_MISSING;
-	if (uffdio_register.mode & UFFDIO_REGISTER_MODE_WP) {
+	if (uffdio_register.mode & UFFDIO_REGISTER_MODE_WP)
 		vm_flags |= VM_UFFD_WP;
-		/*
-		 * FIXME: remove the below error constraint by
-		 * implementing the wprotect tracking mode.
-		 */
-		ret = -EINVAL;
-		goto out;
-	}
 
 	ret = validate_range(mm, &uffdio_register.range.start,
 			     uffdio_register.range.len);
@@ -1380,7 +1381,7 @@ static int userfaultfd_register(struct userfaultfd_ctx *ctx,
 
 		/* check not compatible vmas */
 		ret = -EINVAL;
-		if (!vma_can_userfault(cur))
+		if (!vma_can_userfault(cur, vm_flags))
 			goto out_unlock;
 
 		/*
@@ -1408,6 +1409,8 @@ static int userfaultfd_register(struct userfaultfd_ctx *ctx,
 			if (end & (vma_hpagesize - 1))
 				goto out_unlock;
 		}
+		if ((vm_flags & VM_UFFD_WP) && !(cur->vm_flags & VM_MAYWRITE))
+			goto out_unlock;
 
 		/*
 		 * Check that this vma isn't already owned by a
@@ -1437,7 +1440,7 @@ static int userfaultfd_register(struct userfaultfd_ctx *ctx,
 	do {
 		cond_resched();
 
-		BUG_ON(!vma_can_userfault(vma));
+		BUG_ON(!vma_can_userfault(vma, vm_flags));
 		BUG_ON(vma->vm_userfaultfd_ctx.ctx &&
 		       vma->vm_userfaultfd_ctx.ctx != ctx);
 		WARN_ON(!(vma->vm_flags & VM_MAYWRITE));
@@ -1492,14 +1495,24 @@ static int userfaultfd_register(struct userfaultfd_ctx *ctx,
 	up_write(&mm->mmap_sem);
 	mmput(mm);
 	if (!ret) {
+		__u64 ioctls_out;
+
+		ioctls_out = basic_ioctls ? UFFD_API_RANGE_IOCTLS_BASIC :
+		    UFFD_API_RANGE_IOCTLS;
+
+		/*
+		 * Declare the WP ioctl only if the WP mode is
+		 * specified and all checks passed with the range
+		 */
+		if (!(uffdio_register.mode & UFFDIO_REGISTER_MODE_WP))
+			ioctls_out &= ~((__u64)1 << _UFFDIO_WRITEPROTECT);
+
 		/*
 		 * Now that we scanned all vmas we can already tell
 		 * userland which ioctls methods are guaranteed to
 		 * succeed on this range.
 		 */
-		if (put_user(basic_ioctls ? UFFD_API_RANGE_IOCTLS_BASIC :
-			     UFFD_API_RANGE_IOCTLS,
-			     &user_uffdio_register->ioctls))
+		if (put_user(ioctls_out, &user_uffdio_register->ioctls))
 			ret = -EFAULT;
 	}
 out:
@@ -1575,7 +1588,7 @@ static int userfaultfd_unregister(struct userfaultfd_ctx *ctx,
 		 * provides for more strict behavior to notice
 		 * unregistration errors.
 		 */
-		if (!vma_can_userfault(cur))
+		if (!vma_can_userfault(cur, cur->vm_flags))
 			goto out_unlock;
 
 		found = true;
@@ -1589,7 +1602,7 @@ static int userfaultfd_unregister(struct userfaultfd_ctx *ctx,
 	do {
 		cond_resched();
 
-		BUG_ON(!vma_can_userfault(vma));
+		BUG_ON(!vma_can_userfault(vma, vma->vm_flags));
 
 		/*
 		 * Nothing to do: this vma is already registered into this
@@ -1724,11 +1737,12 @@ static int userfaultfd_copy(struct userfaultfd_ctx *ctx,
 	ret = -EINVAL;
 	if (uffdio_copy.src + uffdio_copy.len <= uffdio_copy.src)
 		goto out;
-	if (uffdio_copy.mode & ~UFFDIO_COPY_MODE_DONTWAKE)
+	if (uffdio_copy.mode & ~(UFFDIO_COPY_MODE_DONTWAKE|UFFDIO_COPY_MODE_WP))
 		goto out;
 	if (mmget_not_zero(ctx->mm)) {
 		ret = mcopy_atomic(ctx->mm, uffdio_copy.dst, uffdio_copy.src,
-				   uffdio_copy.len, &ctx->mmap_changing);
+				   uffdio_copy.len, &ctx->mmap_changing,
+				   uffdio_copy.mode);
 		mmput(ctx->mm);
 	} else {
 		return -ESRCH;
@@ -1801,6 +1815,53 @@ static int userfaultfd_zeropage(struct userfaultfd_ctx *ctx,
 	return ret;
 }
 
+static int userfaultfd_writeprotect(struct userfaultfd_ctx *ctx,
+				    unsigned long arg)
+{
+	int ret;
+	struct uffdio_writeprotect uffdio_wp;
+	struct uffdio_writeprotect __user *user_uffdio_wp;
+	struct userfaultfd_wake_range range;
+	bool mode_wp, mode_dontwake;
+
+	if (READ_ONCE(ctx->mmap_changing))
+		return -EAGAIN;
+
+	user_uffdio_wp = (struct uffdio_writeprotect __user *) arg;
+
+	if (copy_from_user(&uffdio_wp, user_uffdio_wp,
+			   sizeof(struct uffdio_writeprotect)))
+		return -EFAULT;
+
+	ret = validate_range(ctx->mm, &uffdio_wp.range.start,
+			     uffdio_wp.range.len);
+	if (ret)
+		return ret;
+
+	if (uffdio_wp.mode & ~(UFFDIO_WRITEPROTECT_MODE_DONTWAKE |
+			       UFFDIO_WRITEPROTECT_MODE_WP))
+		return -EINVAL;
+
+	mode_wp = uffdio_wp.mode & UFFDIO_WRITEPROTECT_MODE_WP;
+	mode_dontwake = uffdio_wp.mode & UFFDIO_WRITEPROTECT_MODE_DONTWAKE;
+
+	if (mode_wp && mode_dontwake)
+		return -EINVAL;
+
+	ret = mwriteprotect_range(ctx->mm, uffdio_wp.range.start,
+				  uffdio_wp.range.len, mode_wp,
+				  &ctx->mmap_changing);
+	if (ret)
+		return ret;
+
+	if (!mode_wp && !mode_dontwake) {
+		range.start = uffdio_wp.range.start;
+		range.len = uffdio_wp.range.len;
+		wake_userfault(ctx, &range);
+	}
+	return ret;
+}
+
 static inline unsigned int uffd_ctx_features(__u64 user_features)
 {
 	/*
@@ -1882,6 +1943,9 @@ static long userfaultfd_ioctl(struct file *file, unsigned cmd,
 	case UFFDIO_ZEROPAGE:
 		ret = userfaultfd_zeropage(ctx, arg);
 		break;
+	case UFFDIO_WRITEPROTECT:
+		ret = userfaultfd_writeprotect(ctx, arg);
+		break;
 	}
 	return ret;
 }
diff --git a/fs/xattr.c b/fs/xattr.c
index 90dd78f..e13265e 100644
--- a/fs/xattr.c
+++ b/fs/xattr.c
@@ -817,7 +817,7 @@ struct simple_xattr *simple_xattr_alloc(const void *value, size_t size)
 	if (len < sizeof(*new_xattr))
 		return NULL;
 
-	new_xattr = kmalloc(len, GFP_KERNEL);
+	new_xattr = kvmalloc(len, GFP_KERNEL);
 	if (!new_xattr)
 		return NULL;
 
@@ -860,6 +860,7 @@ int simple_xattr_get(struct simple_xattrs *xattrs, const char *name,
  * @value: value of the xattr. If %NULL, will remove the attribute.
  * @size: size of the new xattr
  * @flags: %XATTR_{CREATE|REPLACE}
+ * @removed_size: returns size of the removed xattr, -1 if none removed
  *
  * %XATTR_CREATE is set, the xattr shouldn't exist already; otherwise fails
  * with -EEXIST.  If %XATTR_REPLACE is set, the xattr should exist;
@@ -868,7 +869,8 @@ int simple_xattr_get(struct simple_xattrs *xattrs, const char *name,
  * Returns 0 on success, -errno on failure.
  */
 int simple_xattr_set(struct simple_xattrs *xattrs, const char *name,
-		     const void *value, size_t size, int flags)
+		     const void *value, size_t size, int flags,
+		     ssize_t *removed_size)
 {
 	struct simple_xattr *xattr;
 	struct simple_xattr *new_xattr = NULL;
@@ -882,7 +884,7 @@ int simple_xattr_set(struct simple_xattrs *xattrs, const char *name,
 
 		new_xattr->name = kstrdup(name, GFP_KERNEL);
 		if (!new_xattr->name) {
-			kfree(new_xattr);
+			kvfree(new_xattr);
 			return -ENOMEM;
 		}
 	}
@@ -895,8 +897,12 @@ int simple_xattr_set(struct simple_xattrs *xattrs, const char *name,
 				err = -EEXIST;
 			} else if (new_xattr) {
 				list_replace(&xattr->list, &new_xattr->list);
+				if (removed_size)
+					*removed_size = xattr->size;
 			} else {
 				list_del(&xattr->list);
+				if (removed_size)
+					*removed_size = xattr->size;
 			}
 			goto out;
 		}
@@ -908,11 +914,14 @@ int simple_xattr_set(struct simple_xattrs *xattrs, const char *name,
 		list_add(&new_xattr->list, &xattrs->head);
 		xattr = NULL;
 	}
+
+	if (removed_size)
+		*removed_size = -1;
 out:
 	spin_unlock(&xattrs->lock);
 	if (xattr) {
 		kfree(xattr->name);
-		kfree(xattr);
+		kvfree(xattr);
 	}
 	return err;
 
diff --git a/fs/xfs/libxfs/xfs_sb.c b/fs/xfs/libxfs/xfs_sb.c
index 00266de..c526c5e 100644
--- a/fs/xfs/libxfs/xfs_sb.c
+++ b/fs/xfs/libxfs/xfs_sb.c
@@ -328,6 +328,38 @@ xfs_validate_sb_common(
 		return -EFSCORRUPTED;
 	}
 
+	/* Validate the realtime geometry; stolen from xfs_repair */
+	if (sbp->sb_rextsize * sbp->sb_blocksize > XFS_MAX_RTEXTSIZE ||
+	    sbp->sb_rextsize * sbp->sb_blocksize < XFS_MIN_RTEXTSIZE) {
+		xfs_notice(mp,
+			"realtime extent sanity check failed");
+		return -EFSCORRUPTED;
+	}
+
+	if (sbp->sb_rblocks == 0) {
+		if (sbp->sb_rextents != 0 || sbp->sb_rbmblocks != 0 ||
+		    sbp->sb_rextslog != 0 || sbp->sb_frextents != 0) {
+			xfs_notice(mp,
+				"realtime zeroed geometry check failed");
+			return -EFSCORRUPTED;
+		}
+	} else {
+		uint64_t	rexts;
+		uint64_t	rbmblocks;
+
+		rexts = div_u64(sbp->sb_rblocks, sbp->sb_rextsize);
+		rbmblocks = howmany_64(sbp->sb_rextents,
+				       NBBY * sbp->sb_blocksize);
+
+		if (sbp->sb_rextents != rexts ||
+		    sbp->sb_rextslog != xfs_highbit32(sbp->sb_rextents) ||
+		    sbp->sb_rbmblocks != rbmblocks) {
+			xfs_notice(mp,
+				"realtime geometry sanity check failed");
+			return -EFSCORRUPTED;
+		}
+	}
+
 	if (sbp->sb_unit) {
 		if (!xfs_sb_version_hasdalign(sbp) ||
 		    sbp->sb_unit > sbp->sb_width ||
diff --git a/fs/xfs/xfs_buf.c b/fs/xfs/xfs_buf.c
index f880141..9ec3eaf 100644
--- a/fs/xfs/xfs_buf.c
+++ b/fs/xfs/xfs_buf.c
@@ -327,6 +327,9 @@ xfs_buf_free(
 
 			__free_page(page);
 		}
+		if (current->reclaim_state)
+			current->reclaim_state->reclaimed_slab +=
+							bp->b_page_count;
 	} else if (bp->b_flags & _XBF_KMEM)
 		kmem_free(bp->b_addr);
 	_xfs_buf_free_pages(bp);
@@ -2114,9 +2117,11 @@ xfs_buf_delwri_pushbuf(
 int __init
 xfs_buf_init(void)
 {
-	xfs_buf_zone = kmem_cache_create("xfs_buf",
-					 sizeof(struct xfs_buf), 0,
-					 SLAB_HWCACHE_ALIGN, NULL);
+	xfs_buf_zone = kmem_cache_create("xfs_buf", sizeof(struct xfs_buf), 0,
+					 SLAB_HWCACHE_ALIGN |
+					 SLAB_RECLAIM_ACCOUNT |
+					 SLAB_MEM_SPREAD,
+					 NULL);
 	if (!xfs_buf_zone)
 		goto out;
 
diff --git a/fs/xfs/xfs_dquot.c b/fs/xfs/xfs_dquot.c
index 711376c..af2c8e5 100644
--- a/fs/xfs/xfs_dquot.c
+++ b/fs/xfs/xfs_dquot.c
@@ -1105,8 +1105,8 @@ xfs_qm_dqflush(
 	 * Get the buffer containing the on-disk dquot
 	 */
 	error = xfs_trans_read_buf(mp, NULL, mp->m_ddev_targp, dqp->q_blkno,
-				   mp->m_quotainfo->qi_dqchunklen, 0, &bp,
-				   &xfs_dquot_buf_ops);
+				   mp->m_quotainfo->qi_dqchunklen, XBF_TRYLOCK,
+				   &bp, &xfs_dquot_buf_ops);
 	if (error)
 		goto out_unlock;
 
@@ -1177,7 +1177,7 @@ xfs_qm_dqflush(
 
 out_unlock:
 	xfs_dqfunlock(dqp);
-	return -EIO;
+	return error;
 }
 
 /*
diff --git a/fs/xfs/xfs_dquot_item.c b/fs/xfs/xfs_dquot_item.c
index cf65e2e..baad174 100644
--- a/fs/xfs/xfs_dquot_item.c
+++ b/fs/xfs/xfs_dquot_item.c
@@ -189,7 +189,8 @@ xfs_qm_dquot_logitem_push(
 		if (!xfs_buf_delwri_queue(bp, buffer_list))
 			rval = XFS_ITEM_FLUSHING;
 		xfs_buf_relse(bp);
-	}
+	} else if (error == -EAGAIN)
+		rval = XFS_ITEM_LOCKED;
 
 	spin_lock(&lip->li_ailp->ail_lock);
 out_unlock:
diff --git a/fs/xfs/xfs_export.c b/fs/xfs/xfs_export.c
index f1372f9..5a4b011 100644
--- a/fs/xfs/xfs_export.c
+++ b/fs/xfs/xfs_export.c
@@ -15,7 +15,6 @@
 #include "xfs_trans.h"
 #include "xfs_inode_item.h"
 #include "xfs_icache.h"
-#include "xfs_log.h"
 #include "xfs_pnfs.h"
 
 /*
@@ -221,18 +220,7 @@ STATIC int
 xfs_fs_nfs_commit_metadata(
 	struct inode		*inode)
 {
-	struct xfs_inode	*ip = XFS_I(inode);
-	struct xfs_mount	*mp = ip->i_mount;
-	xfs_lsn_t		lsn = 0;
-
-	xfs_ilock(ip, XFS_ILOCK_SHARED);
-	if (xfs_ipincount(ip))
-		lsn = ip->i_itemp->ili_last_lsn;
-	xfs_iunlock(ip, XFS_ILOCK_SHARED);
-
-	if (!lsn)
-		return 0;
-	return xfs_log_force_lsn(mp, lsn, XFS_LOG_SYNC, NULL);
+	return xfs_log_force_inode(XFS_I(inode));
 }
 
 const struct export_operations xfs_export_operations = {
diff --git a/fs/xfs/xfs_file.c b/fs/xfs/xfs_file.c
index b8a4a3f..4b8bdec 100644
--- a/fs/xfs/xfs_file.c
+++ b/fs/xfs/xfs_file.c
@@ -80,19 +80,9 @@ xfs_dir_fsync(
 	int			datasync)
 {
 	struct xfs_inode	*ip = XFS_I(file->f_mapping->host);
-	struct xfs_mount	*mp = ip->i_mount;
-	xfs_lsn_t		lsn = 0;
 
 	trace_xfs_dir_fsync(ip);
-
-	xfs_ilock(ip, XFS_ILOCK_SHARED);
-	if (xfs_ipincount(ip))
-		lsn = ip->i_itemp->ili_last_lsn;
-	xfs_iunlock(ip, XFS_ILOCK_SHARED);
-
-	if (!lsn)
-		return 0;
-	return xfs_log_force_lsn(mp, lsn, XFS_LOG_SYNC, NULL);
+	return xfs_log_force_inode(ip);
 }
 
 STATIC int
@@ -1069,7 +1059,11 @@ xfs_file_remap_range(
 
 	ret = xfs_reflink_update_dest(dest, pos_out + len, cowextsize,
 			remap_flags);
+	if (ret)
+		goto out_unlock;
 
+	if (mp->m_flags & XFS_MOUNT_WSYNC)
+		xfs_log_force_inode(dest);
 out_unlock:
 	xfs_reflink_remap_unlock(file_in, file_out);
 	if (ret)
diff --git a/fs/xfs/xfs_icache.c b/fs/xfs/xfs_icache.c
index a7be7a9..8bf1d15 100644
--- a/fs/xfs/xfs_icache.c
+++ b/fs/xfs/xfs_icache.c
@@ -911,7 +911,12 @@ xfs_eofblocks_worker(
 {
 	struct xfs_mount *mp = container_of(to_delayed_work(work),
 				struct xfs_mount, m_eofblocks_work);
+
+	if (!sb_start_write_trylock(mp->m_super))
+		return;
 	xfs_icache_free_eofblocks(mp, NULL);
+	sb_end_write(mp->m_super);
+
 	xfs_queue_eofblocks(mp);
 }
 
@@ -938,7 +943,12 @@ xfs_cowblocks_worker(
 {
 	struct xfs_mount *mp = container_of(to_delayed_work(work),
 				struct xfs_mount, m_cowblocks_work);
+
+	if (!sb_start_write_trylock(mp->m_super))
+		return;
 	xfs_icache_free_cowblocks(mp, NULL);
+	sb_end_write(mp->m_super);
+
 	xfs_queue_cowblocks(mp);
 }
 
diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c
index 14b922f..d177278 100644
--- a/fs/xfs/xfs_inode.c
+++ b/fs/xfs/xfs_inode.c
@@ -1200,8 +1200,7 @@ xfs_create(
 	unlock_dp_on_error = false;
 
 	error = xfs_dir_createname(tp, dp, name, ip->i_ino,
-				   resblks ?
-					resblks - XFS_IALLOC_SPACE_RES(mp) : 0);
+					resblks - XFS_IALLOC_SPACE_RES(mp));
 	if (error) {
 		ASSERT(error != -ENOSPC);
 		goto out_trans_cancel;
@@ -2504,6 +2503,88 @@ xfs_iunlink_remove(
 }
 
 /*
+ * Look up the inode number specified and mark it stale if it is found. If it is
+ * dirty, return the inode so it can be attached to the cluster buffer so it can
+ * be processed appropriately when the cluster free transaction completes.
+ */
+static struct xfs_inode *
+xfs_ifree_get_one_inode(
+	struct xfs_perag	*pag,
+	struct xfs_inode	*free_ip,
+	xfs_ino_t		inum)
+{
+	struct xfs_mount	*mp = pag->pag_mount;
+	struct xfs_inode	*ip;
+
+retry:
+	rcu_read_lock();
+	ip = radix_tree_lookup(&pag->pag_ici_root, XFS_INO_TO_AGINO(mp, inum));
+
+	/* Inode not in memory, nothing to do */
+	if (!ip)
+		goto out_rcu_unlock;
+
+	/*
+	 * because this is an RCU protected lookup, we could find a recently
+	 * freed or even reallocated inode during the lookup. We need to check
+	 * under the i_flags_lock for a valid inode here. Skip it if it is not
+	 * valid, the wrong inode or stale.
+	 */
+	spin_lock(&ip->i_flags_lock);
+	if (ip->i_ino != inum || __xfs_iflags_test(ip, XFS_ISTALE)) {
+		spin_unlock(&ip->i_flags_lock);
+		goto out_rcu_unlock;
+	}
+	spin_unlock(&ip->i_flags_lock);
+
+	/*
+	 * Don't try to lock/unlock the current inode, but we _cannot_ skip the
+	 * other inodes that we did not find in the list attached to the buffer
+	 * and are not already marked stale. If we can't lock it, back off and
+	 * retry.
+	 */
+	if (ip != free_ip) {
+		if (!xfs_ilock_nowait(ip, XFS_ILOCK_EXCL)) {
+			rcu_read_unlock();
+			delay(1);
+			goto retry;
+		}
+
+		/*
+		 * Check the inode number again in case we're racing with
+		 * freeing in xfs_reclaim_inode().  See the comments in that
+		 * function for more information as to why the initial check is
+		 * not sufficient.
+		 */
+		if (ip->i_ino != inum) {
+			xfs_iunlock(ip, XFS_ILOCK_EXCL);
+			goto out_rcu_unlock;
+		}
+	}
+	rcu_read_unlock();
+
+	xfs_iflock(ip);
+	xfs_iflags_set(ip, XFS_ISTALE);
+
+	/*
+	 * We don't need to attach clean inodes or those only with unlogged
+	 * changes (which we throw away, anyway).
+	 */
+	if (!ip->i_itemp || xfs_inode_clean(ip)) {
+		ASSERT(ip != free_ip);
+		xfs_ifunlock(ip);
+		xfs_iunlock(ip, XFS_ILOCK_EXCL);
+		goto out_no_inode;
+	}
+	return ip;
+
+out_rcu_unlock:
+	rcu_read_unlock();
+out_no_inode:
+	return NULL;
+}
+
+/*
  * A big issue when freeing the inode cluster is that we _cannot_ skip any
  * inodes that are in memory - they all must be marked stale and attached to
  * the cluster buffer.
@@ -2603,77 +2684,11 @@ xfs_ifree_cluster(
 		 * even trying to lock them.
 		 */
 		for (i = 0; i < igeo->inodes_per_cluster; i++) {
-retry:
-			rcu_read_lock();
-			ip = radix_tree_lookup(&pag->pag_ici_root,
-					XFS_INO_TO_AGINO(mp, (inum + i)));
-
-			/* Inode not in memory, nothing to do */
-			if (!ip) {
-				rcu_read_unlock();
+			ip = xfs_ifree_get_one_inode(pag, free_ip, inum + i);
+			if (!ip)
 				continue;
-			}
 
-			/*
-			 * because this is an RCU protected lookup, we could
-			 * find a recently freed or even reallocated inode
-			 * during the lookup. We need to check under the
-			 * i_flags_lock for a valid inode here. Skip it if it
-			 * is not valid, the wrong inode or stale.
-			 */
-			spin_lock(&ip->i_flags_lock);
-			if (ip->i_ino != inum + i ||
-			    __xfs_iflags_test(ip, XFS_ISTALE)) {
-				spin_unlock(&ip->i_flags_lock);
-				rcu_read_unlock();
-				continue;
-			}
-			spin_unlock(&ip->i_flags_lock);
-
-			/*
-			 * Don't try to lock/unlock the current inode, but we
-			 * _cannot_ skip the other inodes that we did not find
-			 * in the list attached to the buffer and are not
-			 * already marked stale. If we can't lock it, back off
-			 * and retry.
-			 */
-			if (ip != free_ip) {
-				if (!xfs_ilock_nowait(ip, XFS_ILOCK_EXCL)) {
-					rcu_read_unlock();
-					delay(1);
-					goto retry;
-				}
-
-				/*
-				 * Check the inode number again in case we're
-				 * racing with freeing in xfs_reclaim_inode().
-				 * See the comments in that function for more
-				 * information as to why the initial check is
-				 * not sufficient.
-				 */
-				if (ip->i_ino != inum + i) {
-					xfs_iunlock(ip, XFS_ILOCK_EXCL);
-					rcu_read_unlock();
-					continue;
-				}
-			}
-			rcu_read_unlock();
-
-			xfs_iflock(ip);
-			xfs_iflags_set(ip, XFS_ISTALE);
-
-			/*
-			 * we don't need to attach clean inodes or those only
-			 * with unlogged changes (which we throw away, anyway).
-			 */
 			iip = ip->i_itemp;
-			if (!iip || xfs_inode_clean(ip)) {
-				ASSERT(ip != free_ip);
-				xfs_ifunlock(ip);
-				xfs_iunlock(ip, XFS_ILOCK_EXCL);
-				continue;
-			}
-
 			iip->ili_last_fields = iip->ili_fields;
 			iip->ili_fields = 0;
 			iip->ili_fsync_fields = 0;
@@ -3930,3 +3945,22 @@ xfs_irele(
 	trace_xfs_irele(ip, _RET_IP_);
 	iput(VFS_I(ip));
 }
+
+/*
+ * Ensure all commited transactions touching the inode are written to the log.
+ */
+int
+xfs_log_force_inode(
+	struct xfs_inode	*ip)
+{
+	xfs_lsn_t		lsn = 0;
+
+	xfs_ilock(ip, XFS_ILOCK_SHARED);
+	if (xfs_ipincount(ip))
+		lsn = ip->i_itemp->ili_last_lsn;
+	xfs_iunlock(ip, XFS_ILOCK_SHARED);
+
+	if (!lsn)
+		return 0;
+	return xfs_log_force_lsn(ip->i_mount, lsn, XFS_LOG_SYNC, NULL);
+}
diff --git a/fs/xfs/xfs_inode.h b/fs/xfs/xfs_inode.h
index 492e539..c6a63f6 100644
--- a/fs/xfs/xfs_inode.h
+++ b/fs/xfs/xfs_inode.h
@@ -426,6 +426,7 @@ int		xfs_itruncate_extents_flags(struct xfs_trans **,
 				struct xfs_inode *, int, xfs_fsize_t, int);
 void		xfs_iext_realloc(xfs_inode_t *, int, int);
 
+int		xfs_log_force_inode(struct xfs_inode *ip);
 void		xfs_iunpin_wait(xfs_inode_t *);
 #define xfs_ipincount(ip)	((unsigned int) atomic_read(&ip->i_pincount))
 
diff --git a/fs/xfs/xfs_inode_item.c b/fs/xfs/xfs_inode_item.c
index 4a3d13d..f779cca 100644
--- a/fs/xfs/xfs_inode_item.c
+++ b/fs/xfs/xfs_inode_item.c
@@ -552,7 +552,8 @@ xfs_inode_item_push(
 		if (!xfs_buf_delwri_queue(bp, buffer_list))
 			rval = XFS_ITEM_FLUSHING;
 		xfs_buf_relse(bp);
-	}
+	} else if (error == -EAGAIN)
+		rval = XFS_ITEM_LOCKED;
 
 	spin_lock(&lip->li_ailp->ail_lock);
 out_unlock:
@@ -730,29 +731,27 @@ xfs_iflush_done(
 	 * holding the lock before removing the inode from the AIL.
 	 */
 	if (need_ail) {
-		bool			mlip_changed = false;
+		xfs_lsn_t	tail_lsn = 0;
 
 		/* this is an opencoded batch version of xfs_trans_ail_delete */
 		spin_lock(&ailp->ail_lock);
 		list_for_each_entry(blip, &tmp, li_bio_list) {
 			if (INODE_ITEM(blip)->ili_logged &&
-			    blip->li_lsn == INODE_ITEM(blip)->ili_flush_lsn)
-				mlip_changed |= xfs_ail_delete_one(ailp, blip);
-			else {
+			    blip->li_lsn == INODE_ITEM(blip)->ili_flush_lsn) {
+				/*
+				 * xfs_ail_update_finish() only cares about the
+				 * lsn of the first tail item removed, any
+				 * others will be at the same or higher lsn so
+				 * we just ignore them.
+				 */
+				xfs_lsn_t lsn = xfs_ail_delete_one(ailp, blip);
+				if (!tail_lsn && lsn)
+					tail_lsn = lsn;
+			} else {
 				xfs_clear_li_failed(blip);
 			}
 		}
-
-		if (mlip_changed) {
-			if (!XFS_FORCED_SHUTDOWN(ailp->ail_mount))
-				xlog_assign_tail_lsn_locked(ailp->ail_mount);
-			if (list_empty(&ailp->ail_head))
-				wake_up_all(&ailp->ail_empty);
-		}
-		spin_unlock(&ailp->ail_lock);
-
-		if (mlip_changed)
-			xfs_log_space_wake(ailp->ail_mount);
+		xfs_ail_update_finish(ailp, tail_lsn);
 	}
 
 	/*
diff --git a/fs/xfs/xfs_ioctl.c b/fs/xfs/xfs_ioctl.c
index cdfb3cd..3099581 100644
--- a/fs/xfs/xfs_ioctl.c
+++ b/fs/xfs/xfs_ioctl.c
@@ -2363,7 +2363,10 @@ xfs_file_ioctl(
 		if (error)
 			return error;
 
-		return xfs_icache_free_eofblocks(mp, &keofb);
+		sb_start_write(mp->m_super);
+		error = xfs_icache_free_eofblocks(mp, &keofb);
+		sb_end_write(mp->m_super);
+		return error;
 	}
 
 	default:
diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
index 4a53768..00fda2e 100644
--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -24,13 +24,6 @@
 kmem_zone_t	*xfs_log_ticket_zone;
 
 /* Local miscellaneous function prototypes */
-STATIC int
-xlog_commit_record(
-	struct xlog		*log,
-	struct xlog_ticket	*ticket,
-	struct xlog_in_core	**iclog,
-	xfs_lsn_t		*commitlsnp);
-
 STATIC struct xlog *
 xlog_alloc_log(
 	struct xfs_mount	*mp,
@@ -66,14 +59,6 @@ xlog_grant_push_ail(
 	struct xlog		*log,
 	int			need_bytes);
 STATIC void
-xlog_regrant_reserve_log_space(
-	struct xlog		*log,
-	struct xlog_ticket	*ticket);
-STATIC void
-xlog_ungrant_log_space(
-	struct xlog		*log,
-	struct xlog_ticket	*ticket);
-STATIC void
 xlog_sync(
 	struct xlog		*log,
 	struct xlog_in_core	*iclog);
@@ -478,73 +463,6 @@ xfs_log_reserve(
 	return error;
 }
 
-
-/*
- * NOTES:
- *
- *	1. currblock field gets updated at startup and after in-core logs
- *		marked as with WANT_SYNC.
- */
-
-/*
- * This routine is called when a user of a log manager ticket is done with
- * the reservation.  If the ticket was ever used, then a commit record for
- * the associated transaction is written out as a log operation header with
- * no data.  The flag XLOG_TIC_INITED is set when the first write occurs with
- * a given ticket.  If the ticket was one with a permanent reservation, then
- * a few operations are done differently.  Permanent reservation tickets by
- * default don't release the reservation.  They just commit the current
- * transaction with the belief that the reservation is still needed.  A flag
- * must be passed in before permanent reservations are actually released.
- * When these type of tickets are not released, they need to be set into
- * the inited state again.  By doing this, a start record will be written
- * out when the next write occurs.
- */
-xfs_lsn_t
-xfs_log_done(
-	struct xfs_mount	*mp,
-	struct xlog_ticket	*ticket,
-	struct xlog_in_core	**iclog,
-	bool			regrant)
-{
-	struct xlog		*log = mp->m_log;
-	xfs_lsn_t		lsn = 0;
-
-	if (XLOG_FORCED_SHUTDOWN(log) ||
-	    /*
-	     * If nothing was ever written, don't write out commit record.
-	     * If we get an error, just continue and give back the log ticket.
-	     */
-	    (((ticket->t_flags & XLOG_TIC_INITED) == 0) &&
-	     (xlog_commit_record(log, ticket, iclog, &lsn)))) {
-		lsn = (xfs_lsn_t) -1;
-		regrant = false;
-	}
-
-
-	if (!regrant) {
-		trace_xfs_log_done_nonperm(log, ticket);
-
-		/*
-		 * Release ticket if not permanent reservation or a specific
-		 * request has been made to release a permanent reservation.
-		 */
-		xlog_ungrant_log_space(log, ticket);
-	} else {
-		trace_xfs_log_done_perm(log, ticket);
-
-		xlog_regrant_reserve_log_space(log, ticket);
-		/* If this ticket was a permanent reservation and we aren't
-		 * trying to release it, reset the inited flags; so next time
-		 * we write, a start record will be written out.
-		 */
-		ticket->t_flags |= XLOG_TIC_INITED;
-	}
-
-	xfs_log_ticket_put(ticket);
-	return lsn;
-}
-
 static bool
 __xlog_state_release_iclog(
 	struct xlog		*log,
@@ -869,32 +787,44 @@ xlog_wait_on_iclog(
 }
 
 /*
- * Final log writes as part of unmount.
- *
- * Mark the filesystem clean as unmount happens.  Note that during relocation
- * this routine needs to be executed as part of source-bag while the
- * deallocation must not be done until source-end.
+ * Write out an unmount record using the ticket provided. We have to account for
+ * the data space used in the unmount ticket as this write is not done from a
+ * transaction context that has already done the accounting for us.
  */
-
-/* Actually write the unmount record to disk. */
-static void
-xfs_log_write_unmount_record(
-	struct xfs_mount	*mp)
+static int
+xlog_write_unmount_record(
+	struct xlog		*log,
+	struct xlog_ticket	*ticket,
+	xfs_lsn_t		*lsn,
+	uint			flags)
 {
-	/* the data section must be 32 bit size aligned */
-	struct xfs_unmount_log_format magic = {
+	struct xfs_unmount_log_format ulf = {
 		.magic = XLOG_UNMOUNT_TYPE,
 	};
 	struct xfs_log_iovec reg = {
-		.i_addr = &magic,
-		.i_len = sizeof(magic),
+		.i_addr = &ulf,
+		.i_len = sizeof(ulf),
 		.i_type = XLOG_REG_TYPE_UNMOUNT,
 	};
 	struct xfs_log_vec vec = {
 		.lv_niovecs = 1,
 		.lv_iovecp = &reg,
 	};
-	struct xlog		*log = mp->m_log;
+
+	/* account for space used by record data */
+	ticket->t_curr_res -= sizeof(ulf);
+	return xlog_write(log, &vec, ticket, lsn, NULL, flags, false);
+}
+
+/*
+ * Mark the filesystem clean by writing an unmount record to the head of the
+ * log.
+ */
+static void
+xlog_unmount_write(
+	struct xlog		*log)
+{
+	struct xfs_mount	*mp = log->l_mp;
 	struct xlog_in_core	*iclog;
 	struct xlog_ticket	*tic = NULL;
 	xfs_lsn_t		lsn;
@@ -905,23 +835,7 @@ xfs_log_write_unmount_record(
 	if (error)
 		goto out_err;
 
-	/*
-	 * If we think the summary counters are bad, clear the unmount header
-	 * flag in the unmount record so that the summary counters will be
-	 * recalculated during log recovery at next mount.  Refer to
-	 * xlog_check_unmount_rec for more details.
-	 */
-	if (XFS_TEST_ERROR(xfs_fs_has_sickness(mp, XFS_SICK_FS_COUNTERS), mp,
-			XFS_ERRTAG_FORCE_SUMMARY_RECALC)) {
-		xfs_alert(mp, "%s: will fix summary counters at next mount",
-				__func__);
-		flags &= ~XLOG_UNMOUNT_TRANS;
-	}
-
-	/* remove inited flag, and account for space used */
-	tic->t_flags = 0;
-	tic->t_curr_res -= sizeof(magic);
-	error = xlog_write(log, &vec, tic, &lsn, NULL, flags);
+	error = xlog_write_unmount_record(log, tic, &lsn, flags);
 	/*
 	 * At this point, we're umounting anyway, so there's no point in
 	 * transitioning log state to IOERROR. Just continue...
@@ -943,8 +857,7 @@ xfs_log_write_unmount_record(
 
 	if (tic) {
 		trace_xfs_log_umount_write(log, tic);
-		xlog_ungrant_log_space(log, tic);
-		xfs_log_ticket_put(tic);
+		xfs_log_ticket_ungrant(log, tic);
 	}
 }
 
@@ -987,8 +900,22 @@ xfs_log_unmount_write(
 
 	if (XLOG_FORCED_SHUTDOWN(log))
 		return;
+
+	/*
+	 * If we think the summary counters are bad, avoid writing the unmount
+	 * record to force log recovery at next mount, after which the summary
+	 * counters will be recalculated.  Refer to xlog_check_unmount_rec for
+	 * more details.
+	 */
+	if (XFS_TEST_ERROR(xfs_fs_has_sickness(mp, XFS_SICK_FS_COUNTERS), mp,
+			XFS_ERRTAG_FORCE_SUMMARY_RECALC)) {
+		xfs_alert(mp, "%s: will fix summary counters at next mount",
+				__func__);
+		return;
+	}
+
 	xfs_log_unmount_verify_iclog(log);
-	xfs_log_write_unmount_record(mp);
+	xlog_unmount_write(log);
 }
 
 /*
@@ -1515,20 +1442,17 @@ xlog_alloc_log(
 	return ERR_PTR(error);
 }	/* xlog_alloc_log */
 
-
 /*
  * Write out the commit record of a transaction associated with the given
- * ticket.  Return the lsn of the commit record.
+ * ticket to close off a running log write. Return the lsn of the commit record.
  */
-STATIC int
+int
 xlog_commit_record(
 	struct xlog		*log,
 	struct xlog_ticket	*ticket,
 	struct xlog_in_core	**iclog,
-	xfs_lsn_t		*commitlsnp)
+	xfs_lsn_t		*lsn)
 {
-	struct xfs_mount *mp = log->l_mp;
-	int	error;
 	struct xfs_log_iovec reg = {
 		.i_addr = NULL,
 		.i_len = 0,
@@ -1538,12 +1462,15 @@ xlog_commit_record(
 		.lv_niovecs = 1,
 		.lv_iovecp = &reg,
 	};
+	int	error;
 
-	ASSERT_ALWAYS(iclog);
-	error = xlog_write(log, &vec, ticket, commitlsnp, iclog,
-					XLOG_COMMIT_TRANS);
+	if (XLOG_FORCED_SHUTDOWN(log))
+		return -EIO;
+
+	error = xlog_write(log, &vec, ticket, lsn, iclog, XLOG_COMMIT_TRANS,
+			   false);
 	if (error)
-		xfs_force_shutdown(mp, SHUTDOWN_LOG_IO_ERROR);
+		xfs_force_shutdown(log->l_mp, SHUTDOWN_LOG_IO_ERROR);
 	return error;
 }
 
@@ -1761,7 +1688,15 @@ xlog_write_iclog(
 	iclog->ic_bio.bi_iter.bi_sector = log->l_logBBstart + bno;
 	iclog->ic_bio.bi_end_io = xlog_bio_end_io;
 	iclog->ic_bio.bi_private = iclog;
-	iclog->ic_bio.bi_opf = REQ_OP_WRITE | REQ_META | REQ_SYNC | REQ_FUA;
+
+	/*
+	 * We use REQ_SYNC | REQ_IDLE here to tell the block layer the are more
+	 * IOs coming immediately after this one. This prevents the block layer
+	 * writeback throttle from throttling log writes behind background
+	 * metadata writeback and causing priority inversions.
+	 */
+	iclog->ic_bio.bi_opf = REQ_OP_WRITE | REQ_META | REQ_SYNC |
+				REQ_IDLE | REQ_FUA;
 	if (need_flush)
 		iclog->ic_bio.bi_opf |= REQ_PREFLUSH;
 
@@ -1981,7 +1916,7 @@ xlog_dealloc_log(
 	log->l_mp->m_log = NULL;
 	destroy_workqueue(log->l_ioend_workqueue);
 	kmem_free(log);
-}	/* xlog_dealloc_log */
+}
 
 /*
  * Update counters atomically now that memcpy is done.
@@ -2118,23 +2053,21 @@ xlog_print_trans(
 }
 
 /*
- * Calculate the potential space needed by the log vector.  Each region gets
- * its own xlog_op_header_t and may need to be double word aligned.
+ * Calculate the potential space needed by the log vector.  We may need a start
+ * record, and each region gets its own struct xlog_op_header and may need to be
+ * double word aligned.
  */
 static int
 xlog_write_calc_vec_length(
 	struct xlog_ticket	*ticket,
-	struct xfs_log_vec	*log_vector)
+	struct xfs_log_vec	*log_vector,
+	bool			need_start_rec)
 {
 	struct xfs_log_vec	*lv;
-	int			headers = 0;
+	int			headers = need_start_rec ? 1 : 0;
 	int			len = 0;
 	int			i;
 
-	/* acct for start rec of xact */
-	if (ticket->t_flags & XLOG_TIC_INITED)
-		headers++;
-
 	for (lv = log_vector; lv; lv = lv->lv_next) {
 		/* we don't write ordered log vectors */
 		if (lv->lv_buf_len == XFS_LOG_VEC_ORDERED)
@@ -2156,27 +2089,16 @@ xlog_write_calc_vec_length(
 	return len;
 }
 
-/*
- * If first write for transaction, insert start record  We can't be trying to
- * commit if we are inited.  We can't have any "partial_copy" if we are inited.
- */
-static int
+static void
 xlog_write_start_rec(
 	struct xlog_op_header	*ophdr,
 	struct xlog_ticket	*ticket)
 {
-	if (!(ticket->t_flags & XLOG_TIC_INITED))
-		return 0;
-
 	ophdr->oh_tid	= cpu_to_be32(ticket->t_tid);
 	ophdr->oh_clientid = ticket->t_clientid;
 	ophdr->oh_len = 0;
 	ophdr->oh_flags = XLOG_START_TRANS;
 	ophdr->oh_res2 = 0;
-
-	ticket->t_flags &= ~XLOG_TIC_INITED;
-
-	return sizeof(struct xlog_op_header);
 }
 
 static xlog_op_header_t *
@@ -2365,13 +2287,14 @@ xlog_write(
 	struct xlog_ticket	*ticket,
 	xfs_lsn_t		*start_lsn,
 	struct xlog_in_core	**commit_iclog,
-	uint			flags)
+	uint			flags,
+	bool			need_start_rec)
 {
 	struct xlog_in_core	*iclog = NULL;
-	struct xfs_log_iovec	*vecp;
-	struct xfs_log_vec	*lv;
+	struct xfs_log_vec	*lv = log_vector;
+	struct xfs_log_iovec	*vecp = lv->lv_iovecp;
+	int			index = 0;
 	int			len;
-	int			index;
 	int			partial_copy = 0;
 	int			partial_copy_len = 0;
 	int			contwr = 0;
@@ -2379,25 +2302,13 @@ xlog_write(
 	int			data_cnt = 0;
 	int			error = 0;
 
-	*start_lsn = 0;
-
-	len = xlog_write_calc_vec_length(ticket, log_vector);
-
 	/*
-	 * Region headers and bytes are already accounted for.
-	 * We only need to take into account start records and
-	 * split regions in this function.
+	 * If this is a commit or unmount transaction, we don't need a start
+	 * record to be written.  We do, however, have to account for the
+	 * commit or unmount header that gets written. Hence we always have
+	 * to account for an extra xlog_op_header here.
 	 */
-	if (ticket->t_flags & XLOG_TIC_INITED)
-		ticket->t_curr_res -= sizeof(xlog_op_header_t);
-
-	/*
-	 * Commit record headers need to be accounted for. These
-	 * come in as separate writes so are easy to detect.
-	 */
-	if (flags & (XLOG_COMMIT_TRANS | XLOG_UNMOUNT_TRANS))
-		ticket->t_curr_res -= sizeof(xlog_op_header_t);
-
+	ticket->t_curr_res -= sizeof(struct xlog_op_header);
 	if (ticket->t_curr_res < 0) {
 		xfs_alert_tag(log->l_mp, XFS_PTAG_LOGRES,
 		     "ctx ticket reservation ran out. Need to up reservation");
@@ -2405,9 +2316,8 @@ xlog_write(
 		xfs_force_shutdown(log->l_mp, SHUTDOWN_LOG_IO_ERROR);
 	}
 
-	index = 0;
-	lv = log_vector;
-	vecp = lv->lv_iovecp;
+	len = xlog_write_calc_vec_length(ticket, log_vector, need_start_rec);
+	*start_lsn = 0;
 	while (lv && (!lv->lv_niovecs || index < lv->lv_niovecs)) {
 		void		*ptr;
 		int		log_offset;
@@ -2431,7 +2341,6 @@ xlog_write(
 		while (lv && (!lv->lv_niovecs || index < lv->lv_niovecs)) {
 			struct xfs_log_iovec	*reg;
 			struct xlog_op_header	*ophdr;
-			int			start_rec_copy;
 			int			copy_len;
 			int			copy_off;
 			bool			ordered = false;
@@ -2447,11 +2356,15 @@ xlog_write(
 			ASSERT(reg->i_len % sizeof(int32_t) == 0);
 			ASSERT((unsigned long)ptr % sizeof(int32_t) == 0);
 
-			start_rec_copy = xlog_write_start_rec(ptr, ticket);
-			if (start_rec_copy) {
-				record_cnt++;
+			/*
+			 * Before we start formatting log vectors, we need to
+			 * write a start record. Only do this for the first
+			 * iclog we write to.
+			 */
+			if (need_start_rec) {
+				xlog_write_start_rec(ptr, ticket);
 				xlog_write_adv_cnt(&ptr, &len, &log_offset,
-						   start_rec_copy);
+						sizeof(struct xlog_op_header));
 			}
 
 			ophdr = xlog_write_setup_ophdr(log, ptr, ticket, flags);
@@ -2483,8 +2396,13 @@ xlog_write(
 				xlog_write_adv_cnt(&ptr, &len, &log_offset,
 						   copy_len);
 			}
-			copy_len += start_rec_copy + sizeof(xlog_op_header_t);
+			copy_len += sizeof(struct xlog_op_header);
 			record_cnt++;
+			if (need_start_rec) {
+				copy_len += sizeof(struct xlog_op_header);
+				record_cnt++;
+				need_start_rec = false;
+			}
 			data_cnt += contwr ? copy_len : 0;
 
 			error = xlog_write_copy_finish(log, iclog, flags,
@@ -2541,14 +2459,6 @@ xlog_write(
 	return error;
 }
 
-
-/*****************************************************************************
- *
- *		State Machine functions
- *
- *****************************************************************************
- */
-
 static void
 xlog_state_activate_iclog(
 	struct xlog_in_core	*iclog,
@@ -2909,7 +2819,7 @@ xlog_state_done_syncing(
 	 */
 	wake_up_all(&iclog->ic_write_wait);
 	spin_unlock(&log->l_icloglock);
-	xlog_state_do_callback(log);	/* also cleans log */
+	xlog_state_do_callback(log);
 }
 
 /*
@@ -3029,21 +2939,21 @@ xlog_state_get_iclog_space(
 
 	*logoffsetp = log_offset;
 	return 0;
-}	/* xlog_state_get_iclog_space */
+}
 
-/* The first cnt-1 times through here we don't need to
- * move the grant write head because the permanent
- * reservation has reserved cnt times the unit amount.
- * Release part of current permanent unit reservation and
- * reset current reservation to be one units worth.  Also
- * move grant reservation head forward.
+/*
+ * The first cnt-1 times a ticket goes through here we don't need to move the
+ * grant write head because the permanent reservation has reserved cnt times the
+ * unit amount.  Release part of current permanent unit reservation and reset
+ * current reservation to be one units worth.  Also move grant reservation head
+ * forward.
  */
-STATIC void
-xlog_regrant_reserve_log_space(
+void
+xfs_log_ticket_regrant(
 	struct xlog		*log,
 	struct xlog_ticket	*ticket)
 {
-	trace_xfs_log_regrant_reserve_enter(log, ticket);
+	trace_xfs_log_ticket_regrant(log, ticket);
 
 	if (ticket->t_cnt > 0)
 		ticket->t_cnt--;
@@ -3055,21 +2965,20 @@ xlog_regrant_reserve_log_space(
 	ticket->t_curr_res = ticket->t_unit_res;
 	xlog_tic_reset_res(ticket);
 
-	trace_xfs_log_regrant_reserve_sub(log, ticket);
+	trace_xfs_log_ticket_regrant_sub(log, ticket);
 
 	/* just return if we still have some of the pre-reserved space */
-	if (ticket->t_cnt > 0)
-		return;
+	if (!ticket->t_cnt) {
+		xlog_grant_add_space(log, &log->l_reserve_head.grant,
+				     ticket->t_unit_res);
+		trace_xfs_log_ticket_regrant_exit(log, ticket);
 
-	xlog_grant_add_space(log, &log->l_reserve_head.grant,
-					ticket->t_unit_res);
+		ticket->t_curr_res = ticket->t_unit_res;
+		xlog_tic_reset_res(ticket);
+	}
 
-	trace_xfs_log_regrant_reserve_exit(log, ticket);
-
-	ticket->t_curr_res = ticket->t_unit_res;
-	xlog_tic_reset_res(ticket);
-}	/* xlog_regrant_reserve_log_space */
-
+	xfs_log_ticket_put(ticket);
+}
 
 /*
  * Give back the space left from a reservation.
@@ -3085,18 +2994,19 @@ xlog_regrant_reserve_log_space(
  * space, the count will stay at zero and the only space remaining will be
  * in the current reservation field.
  */
-STATIC void
-xlog_ungrant_log_space(
+void
+xfs_log_ticket_ungrant(
 	struct xlog		*log,
 	struct xlog_ticket	*ticket)
 {
-	int	bytes;
+	int			bytes;
+
+	trace_xfs_log_ticket_ungrant(log, ticket);
 
 	if (ticket->t_cnt > 0)
 		ticket->t_cnt--;
 
-	trace_xfs_log_ungrant_enter(log, ticket);
-	trace_xfs_log_ungrant_sub(log, ticket);
+	trace_xfs_log_ticket_ungrant_sub(log, ticket);
 
 	/*
 	 * If this is a permanent reservation ticket, we may be able to free
@@ -3111,18 +3021,15 @@ xlog_ungrant_log_space(
 	xlog_grant_sub_space(log, &log->l_reserve_head.grant, bytes);
 	xlog_grant_sub_space(log, &log->l_write_head.grant, bytes);
 
-	trace_xfs_log_ungrant_exit(log, ticket);
+	trace_xfs_log_ticket_ungrant_exit(log, ticket);
 
 	xfs_log_space_wake(log->l_mp);
+	xfs_log_ticket_put(ticket);
 }
 
 /*
- * Mark the current iclog in the ring as WANT_SYNC and move the current iclog
- * pointer to the next iclog in the ring.
- *
- * When called from xlog_state_get_iclog_space(), the exact size of the iclog
- * has not yet been determined, all we know is that we have run out of space in
- * the current iclog.
+ * This routine will mark the current iclog in the ring as WANT_SYNC and move
+ * the current iclog pointer to the next iclog in the ring.
  */
 STATIC void
 xlog_state_switch_iclogs(
@@ -3167,7 +3074,7 @@ xlog_state_switch_iclogs(
 	}
 	ASSERT(iclog == log->l_iclog);
 	log->l_iclog = iclog->ic_next;
-}	/* xlog_state_switch_iclogs */
+}
 
 /*
  * Write out all data in the in-core log as of this exact moment in time.
@@ -3374,13 +3281,6 @@ xfs_log_force_lsn(
 	return ret;
 }
 
-/*****************************************************************************
- *
- *		TICKET functions
- *
- *****************************************************************************
- */
-
 /*
  * Free a used ticket when its refcount falls to zero.
  */
@@ -3529,7 +3429,6 @@ xlog_ticket_alloc(
 	tic->t_ocnt		= cnt;
 	tic->t_tid		= prandom_u32();
 	tic->t_clientid		= client;
-	tic->t_flags		= XLOG_TIC_INITED;
 	if (permanent)
 		tic->t_flags |= XLOG_TIC_PERM_RESERV;
 
@@ -3538,13 +3437,6 @@ xlog_ticket_alloc(
 	return tic;
 }
 
-
-/******************************************************************************
- *
- *		Log debug routines
- *
- ******************************************************************************
- */
 #if defined(DEBUG)
 /*
  * Make sure that the destination ptr is within the valid data region of
@@ -3630,7 +3522,7 @@ xlog_verify_tail_lsn(
 	if (blocks < BTOBB(iclog->ic_offset) + 1)
 		xfs_emerg(log->l_mp, "%s: ran out of log space", __func__);
     }
-}	/* xlog_verify_tail_lsn */
+}
 
 /*
  * Perform a number of checks on the iclog before writing to disk.
@@ -3733,7 +3625,7 @@ xlog_verify_iclog(
 		}
 		ptr += sizeof(xlog_op_header_t) + op_len;
 	}
-}	/* xlog_verify_iclog */
+}
 #endif
 
 /*
diff --git a/fs/xfs/xfs_log.h b/fs/xfs/xfs_log.h
index cc77cc3..1412d69 100644
--- a/fs/xfs/xfs_log.h
+++ b/fs/xfs/xfs_log.h
@@ -105,10 +105,6 @@ struct xfs_log_item;
 struct xfs_item_ops;
 struct xfs_trans;
 
-xfs_lsn_t xfs_log_done(struct xfs_mount *mp,
-		       struct xlog_ticket *ticket,
-		       struct xlog_in_core **iclog,
-		       bool regrant);
 int	  xfs_log_force(struct xfs_mount *mp, uint flags);
 int	  xfs_log_force_lsn(struct xfs_mount *mp, xfs_lsn_t lsn, uint flags,
 		int *log_forced);
diff --git a/fs/xfs/xfs_log_cil.c b/fs/xfs/xfs_log_cil.c
index 64cc0bf..b43f0e8 100644
--- a/fs/xfs/xfs_log_cil.c
+++ b/fs/xfs/xfs_log_cil.c
@@ -669,6 +669,11 @@ xlog_cil_push_work(
 	ASSERT(push_seq <= ctx->sequence);
 
 	/*
+	 * Wake up any background push waiters now this context is being pushed.
+	 */
+	wake_up_all(&ctx->push_wait);
+
+	/*
 	 * Check if we've anything to push. If there is nothing, then we don't
 	 * move on to a new sequence number and so we have to be able to push
 	 * this sequence again later.
@@ -744,6 +749,7 @@ xlog_cil_push_work(
 	 */
 	INIT_LIST_HEAD(&new_ctx->committing);
 	INIT_LIST_HEAD(&new_ctx->busy_extents);
+	init_waitqueue_head(&new_ctx->push_wait);
 	new_ctx->sequence = ctx->sequence + 1;
 	new_ctx->cil = cil;
 	cil->xc_ctx = new_ctx;
@@ -801,7 +807,7 @@ xlog_cil_push_work(
 	lvhdr.lv_iovecp = &lhdr;
 	lvhdr.lv_next = ctx->lv_chain;
 
-	error = xlog_write(log, &lvhdr, tic, &ctx->start_lsn, NULL, 0);
+	error = xlog_write(log, &lvhdr, tic, &ctx->start_lsn, NULL, 0, true);
 	if (error)
 		goto out_abort_free_ticket;
 
@@ -839,10 +845,11 @@ xlog_cil_push_work(
 	}
 	spin_unlock(&cil->xc_push_lock);
 
-	/* xfs_log_done always frees the ticket on error. */
-	commit_lsn = xfs_log_done(log->l_mp, tic, &commit_iclog, false);
-	if (commit_lsn == -1)
-		goto out_abort;
+	error = xlog_commit_record(log, tic, &commit_iclog, &commit_lsn);
+	if (error)
+		goto out_abort_free_ticket;
+
+	xfs_log_ticket_ungrant(log, tic);
 
 	spin_lock(&commit_iclog->ic_callback_lock);
 	if (commit_iclog->ic_state == XLOG_STATE_IOERROR) {
@@ -875,7 +882,7 @@ xlog_cil_push_work(
 	return;
 
 out_abort_free_ticket:
-	xfs_log_ticket_put(tic);
+	xfs_log_ticket_ungrant(log, tic);
 out_abort:
 	ASSERT(XLOG_FORCED_SHUTDOWN(log));
 	xlog_cil_committed(ctx);
@@ -890,7 +897,7 @@ xlog_cil_push_work(
  */
 static void
 xlog_cil_push_background(
-	struct xlog	*log)
+	struct xlog	*log) __releases(cil->xc_ctx_lock)
 {
 	struct xfs_cil	*cil = log->l_cilp;
 
@@ -904,14 +911,36 @@ xlog_cil_push_background(
 	 * don't do a background push if we haven't used up all the
 	 * space available yet.
 	 */
-	if (cil->xc_ctx->space_used < XLOG_CIL_SPACE_LIMIT(log))
+	if (cil->xc_ctx->space_used < XLOG_CIL_SPACE_LIMIT(log)) {
+		up_read(&cil->xc_ctx_lock);
 		return;
+	}
 
 	spin_lock(&cil->xc_push_lock);
 	if (cil->xc_push_seq < cil->xc_current_sequence) {
 		cil->xc_push_seq = cil->xc_current_sequence;
 		queue_work(log->l_mp->m_cil_workqueue, &cil->xc_push_work);
 	}
+
+	/*
+	 * Drop the context lock now, we can't hold that if we need to sleep
+	 * because we are over the blocking threshold. The push_lock is still
+	 * held, so blocking threshold sleep/wakeup is still correctly
+	 * serialised here.
+	 */
+	up_read(&cil->xc_ctx_lock);
+
+	/*
+	 * If we are well over the space limit, throttle the work that is being
+	 * done until the push work on this context has begun.
+	 */
+	if (cil->xc_ctx->space_used >= XLOG_CIL_BLOCKING_SPACE_LIMIT(log)) {
+		trace_xfs_log_cil_wait(log, cil->xc_ctx->ticket);
+		ASSERT(cil->xc_ctx->space_used < log->l_logsize);
+		xlog_wait(&cil->xc_ctx->push_wait, &cil->xc_push_lock);
+		return;
+	}
+
 	spin_unlock(&cil->xc_push_lock);
 
 }
@@ -1007,7 +1036,10 @@ xfs_log_commit_cil(
 	if (commit_lsn)
 		*commit_lsn = xc_commit_lsn;
 
-	xfs_log_done(mp, tp->t_ticket, NULL, regrant);
+	if (regrant && !XLOG_FORCED_SHUTDOWN(log))
+		xfs_log_ticket_regrant(log, tp->t_ticket);
+	else
+		xfs_log_ticket_ungrant(log, tp->t_ticket);
 	tp->t_ticket = NULL;
 	xfs_trans_unreserve_and_mod_sb(tp);
 
@@ -1028,9 +1060,9 @@ xfs_log_commit_cil(
 		if (lip->li_ops->iop_committing)
 			lip->li_ops->iop_committing(lip, xc_commit_lsn);
 	}
-	xlog_cil_push_background(log);
 
-	up_read(&cil->xc_ctx_lock);
+	/* xlog_cil_push_background() releases cil->xc_ctx_lock */
+	xlog_cil_push_background(log);
 }
 
 /*
@@ -1189,6 +1221,7 @@ xlog_cil_init(
 
 	INIT_LIST_HEAD(&ctx->committing);
 	INIT_LIST_HEAD(&ctx->busy_extents);
+	init_waitqueue_head(&ctx->push_wait);
 	ctx->sequence = 1;
 	ctx->cil = cil;
 	cil->xc_ctx = ctx;
diff --git a/fs/xfs/xfs_log_priv.h b/fs/xfs/xfs_log_priv.h
index 2b0aec3..ec22c7a 100644
--- a/fs/xfs/xfs_log_priv.h
+++ b/fs/xfs/xfs_log_priv.h
@@ -51,13 +51,11 @@ enum xlog_iclog_state {
 };
 
 /*
- * Flags to log ticket
+ * Log ticket flags
  */
-#define XLOG_TIC_INITED		0x1	/* has been initialized */
-#define XLOG_TIC_PERM_RESERV	0x2	/* permanent reservation */
+#define XLOG_TIC_PERM_RESERV	0x1	/* permanent reservation */
 
 #define XLOG_TIC_FLAGS \
-	{ XLOG_TIC_INITED,	"XLOG_TIC_INITED" }, \
 	{ XLOG_TIC_PERM_RESERV,	"XLOG_TIC_PERM_RESERV" }
 
 /*
@@ -242,6 +240,7 @@ struct xfs_cil_ctx {
 	struct xfs_log_vec	*lv_chain;	/* logvecs being pushed */
 	struct list_head	iclog_entry;
 	struct list_head	committing;	/* ctx committing list */
+	wait_queue_head_t	push_wait;	/* background push throttle */
 	struct work_struct	discard_endio_work;
 };
 
@@ -318,13 +317,53 @@ struct xfs_cil {
  * tries to keep 25% of the log free, so we need to keep below that limit or we
  * risk running out of free log space to start any new transactions.
  *
- * In order to keep background CIL push efficient, we will set a lower
- * threshold at which background pushing is attempted without blocking current
- * transaction commits.  A separate, higher bound defines when CIL pushes are
- * enforced to ensure we stay within our maximum checkpoint size bounds.
- * threshold, yet give us plenty of space for aggregation on large logs.
+ * In order to keep background CIL push efficient, we only need to ensure the
+ * CIL is large enough to maintain sufficient in-memory relogging to avoid
+ * repeated physical writes of frequently modified metadata. If we allow the CIL
+ * to grow to a substantial fraction of the log, then we may be pinning hundreds
+ * of megabytes of metadata in memory until the CIL flushes. This can cause
+ * issues when we are running low on memory - pinned memory cannot be reclaimed,
+ * and the CIL consumes a lot of memory. Hence we need to set an upper physical
+ * size limit for the CIL that limits the maximum amount of memory pinned by the
+ * CIL but does not limit performance by reducing relogging efficiency
+ * significantly.
+ *
+ * As such, the CIL push threshold ends up being the smaller of two thresholds:
+ * - a threshold large enough that it allows CIL to be pushed and progress to be
+ *   made without excessive blocking of incoming transaction commits. This is
+ *   defined to be 12.5% of the log space - half the 25% push threshold of the
+ *   AIL.
+ * - small enough that it doesn't pin excessive amounts of memory but maintains
+ *   close to peak relogging efficiency. This is defined to be 16x the iclog
+ *   buffer window (32MB) as measurements have shown this to be roughly the
+ *   point of diminishing performance increases under highly concurrent
+ *   modification workloads.
+ *
+ * To prevent the CIL from overflowing upper commit size bounds, we introduce a
+ * new threshold at which we block committing transactions until the background
+ * CIL commit commences and switches to a new context. While this is not a hard
+ * limit, it forces the process committing a transaction to the CIL to block and
+ * yeild the CPU, giving the CIL push work a chance to be scheduled and start
+ * work. This prevents a process running lots of transactions from overfilling
+ * the CIL because it is not yielding the CPU. We set the blocking limit at
+ * twice the background push space threshold so we keep in line with the AIL
+ * push thresholds.
+ *
+ * Note: this is not a -hard- limit as blocking is applied after the transaction
+ * is inserted into the CIL and the push has been triggered. It is largely a
+ * throttling mechanism that allows the CIL push to be scheduled and run. A hard
+ * limit will be difficult to implement without introducing global serialisation
+ * in the CIL commit fast path, and it's not at all clear that we actually need
+ * such hard limits given the ~7 years we've run without a hard limit before
+ * finding the first situation where a checkpoint size overflow actually
+ * occurred. Hence the simple throttle, and an ASSERT check to tell us that
+ * we've overrun the max size.
  */
-#define XLOG_CIL_SPACE_LIMIT(log)	(log->l_logsize >> 3)
+#define XLOG_CIL_SPACE_LIMIT(log)	\
+	min_t(int, (log)->l_logsize >> 3, BBTOB(XLOG_TOTAL_REC_SHIFT(log)) << 4)
+
+#define XLOG_CIL_BLOCKING_SPACE_LIMIT(log)	\
+	(XLOG_CIL_SPACE_LIMIT(log) * 2)
 
 /*
  * ticket grant locks, queues and accounting have their own cachlines
@@ -439,14 +478,14 @@ xlog_write_adv_cnt(void **ptr, int *len, int *off, size_t bytes)
 
 void	xlog_print_tic_res(struct xfs_mount *mp, struct xlog_ticket *ticket);
 void	xlog_print_trans(struct xfs_trans *);
-int
-xlog_write(
-	struct xlog		*log,
-	struct xfs_log_vec	*log_vector,
-	struct xlog_ticket	*tic,
-	xfs_lsn_t		*start_lsn,
-	struct xlog_in_core	**commit_iclog,
-	uint			flags);
+int	xlog_write(struct xlog *log, struct xfs_log_vec *log_vector,
+		struct xlog_ticket *tic, xfs_lsn_t *start_lsn,
+		struct xlog_in_core **commit_iclog, uint flags,
+		bool need_start_rec);
+int	xlog_commit_record(struct xlog *log, struct xlog_ticket *ticket,
+		struct xlog_in_core **iclog, xfs_lsn_t *lsn);
+void	xfs_log_ticket_ungrant(struct xlog *log, struct xlog_ticket *ticket);
+void	xfs_log_ticket_regrant(struct xlog *log, struct xlog_ticket *ticket);
 
 /*
  * When we crack an atomic LSN, we sample it first so that the value will not
diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h
index 88ab09e..b2e4598 100644
--- a/fs/xfs/xfs_mount.h
+++ b/fs/xfs/xfs_mount.h
@@ -168,6 +168,11 @@ typedef struct xfs_mount {
 	struct xfs_error_cfg	m_error_cfg[XFS_ERR_CLASS_MAX][XFS_ERR_ERRNO_MAX];
 	struct xstats		m_stats;	/* per-fs stats */
 
+	/*
+	 * Workqueue item so that we can coalesce multiple inode flush attempts
+	 * into a single flush.
+	 */
+	struct work_struct	m_flush_inodes_work;
 	struct workqueue_struct *m_buf_workqueue;
 	struct workqueue_struct	*m_unwritten_workqueue;
 	struct workqueue_struct	*m_cil_workqueue;
diff --git a/fs/xfs/xfs_qm.c b/fs/xfs/xfs_qm.c
index cabdb75..c225691 100644
--- a/fs/xfs/xfs_qm.c
+++ b/fs/xfs/xfs_qm.c
@@ -121,12 +121,11 @@ xfs_qm_dqpurge(
 {
 	struct xfs_mount	*mp = dqp->q_mount;
 	struct xfs_quotainfo	*qi = mp->m_quotainfo;
+	int			error = -EAGAIN;
 
 	xfs_dqlock(dqp);
-	if ((dqp->dq_flags & XFS_DQ_FREEING) || dqp->q_nrefs != 0) {
-		xfs_dqunlock(dqp);
-		return -EAGAIN;
-	}
+	if ((dqp->dq_flags & XFS_DQ_FREEING) || dqp->q_nrefs != 0)
+		goto out_unlock;
 
 	dqp->dq_flags |= XFS_DQ_FREEING;
 
@@ -139,7 +138,6 @@ xfs_qm_dqpurge(
 	 */
 	if (XFS_DQ_IS_DIRTY(dqp)) {
 		struct xfs_buf	*bp = NULL;
-		int		error;
 
 		/*
 		 * We don't care about getting disk errors here. We need
@@ -149,6 +147,8 @@ xfs_qm_dqpurge(
 		if (!error) {
 			error = xfs_bwrite(bp);
 			xfs_buf_relse(bp);
+		} else if (error == -EAGAIN) {
+			goto out_unlock;
 		}
 		xfs_dqflock(dqp);
 	}
@@ -174,6 +174,10 @@ xfs_qm_dqpurge(
 
 	xfs_qm_dqdestroy(dqp);
 	return 0;
+
+out_unlock:
+	xfs_dqunlock(dqp);
+	return error;
 }
 
 /*
diff --git a/fs/xfs/xfs_reflink.c b/fs/xfs/xfs_reflink.c
index b0ce04f..107bf2a 100644
--- a/fs/xfs/xfs_reflink.c
+++ b/fs/xfs/xfs_reflink.c
@@ -1051,6 +1051,7 @@ xfs_reflink_remap_extent(
 		uirec.br_startblock = irec->br_startblock + rlen;
 		uirec.br_startoff = irec->br_startoff + rlen;
 		uirec.br_blockcount = unmap_len - rlen;
+		uirec.br_state = irec->br_state;
 		unmap_len = rlen;
 
 		/* If this isn't a real mapping, we're done. */
diff --git a/fs/xfs/xfs_super.c b/fs/xfs/xfs_super.c
index 2094386..424bb9a 100644
--- a/fs/xfs/xfs_super.c
+++ b/fs/xfs/xfs_super.c
@@ -516,6 +516,20 @@ xfs_destroy_mount_workqueues(
 	destroy_workqueue(mp->m_buf_workqueue);
 }
 
+static void
+xfs_flush_inodes_worker(
+	struct work_struct	*work)
+{
+	struct xfs_mount	*mp = container_of(work, struct xfs_mount,
+						   m_flush_inodes_work);
+	struct super_block	*sb = mp->m_super;
+
+	if (down_read_trylock(&sb->s_umount)) {
+		sync_inodes_sb(sb);
+		up_read(&sb->s_umount);
+	}
+}
+
 /*
  * Flush all dirty data to disk. Must not be called while holding an XFS_ILOCK
  * or a page lock. We use sync_inodes_sb() here to ensure we block while waiting
@@ -526,12 +540,15 @@ void
 xfs_flush_inodes(
 	struct xfs_mount	*mp)
 {
-	struct super_block	*sb = mp->m_super;
+	/*
+	 * If flush_work() returns true then that means we waited for a flush
+	 * which was already in progress.  Don't bother running another scan.
+	 */
+	if (flush_work(&mp->m_flush_inodes_work))
+		return;
 
-	if (down_read_trylock(&sb->s_umount)) {
-		sync_inodes_sb(sb);
-		up_read(&sb->s_umount);
-	}
+	queue_work(mp->m_sync_workqueue, &mp->m_flush_inodes_work);
+	flush_work(&mp->m_flush_inodes_work);
 }
 
 /* Catch misguided souls that try to use this interface on XFS */
@@ -1738,6 +1755,7 @@ static int xfs_init_fs_context(
 	spin_lock_init(&mp->m_perag_lock);
 	mutex_init(&mp->m_growlock);
 	atomic_set(&mp->m_active_trans, 0);
+	INIT_WORK(&mp->m_flush_inodes_work, xfs_flush_inodes_worker);
 	INIT_DELAYED_WORK(&mp->m_reclaim_work, xfs_reclaim_worker);
 	INIT_DELAYED_WORK(&mp->m_eofblocks_work, xfs_eofblocks_worker);
 	INIT_DELAYED_WORK(&mp->m_cowblocks_work, xfs_cowblocks_worker);
@@ -1861,7 +1879,8 @@ xfs_init_zones(void)
 
 	xfs_ili_zone = kmem_cache_create("xfs_ili",
 					 sizeof(struct xfs_inode_log_item), 0,
-					 SLAB_MEM_SPREAD, NULL);
+					 SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD,
+					 NULL);
 	if (!xfs_ili_zone)
 		goto out_destroy_inode_zone;
 
diff --git a/fs/xfs/xfs_symlink.c b/fs/xfs/xfs_symlink.c
index fa0fa3c..13fb4b9 100644
--- a/fs/xfs/xfs_symlink.c
+++ b/fs/xfs/xfs_symlink.c
@@ -176,7 +176,6 @@ xfs_symlink(
 		return -ENAMETOOLONG;
 	ASSERT(pathlen > 0);
 
-	udqp = gdqp = NULL;
 	prid = xfs_get_initial_prid(dp);
 
 	/*
diff --git a/fs/xfs/xfs_trace.h b/fs/xfs/xfs_trace.h
index efc7751..a4323a6 100644
--- a/fs/xfs/xfs_trace.h
+++ b/fs/xfs/xfs_trace.h
@@ -1001,8 +1001,6 @@ DECLARE_EVENT_CLASS(xfs_loggrant_class,
 DEFINE_EVENT(xfs_loggrant_class, name, \
 	TP_PROTO(struct xlog *log, struct xlog_ticket *tic), \
 	TP_ARGS(log, tic))
-DEFINE_LOGGRANT_EVENT(xfs_log_done_nonperm);
-DEFINE_LOGGRANT_EVENT(xfs_log_done_perm);
 DEFINE_LOGGRANT_EVENT(xfs_log_umount_write);
 DEFINE_LOGGRANT_EVENT(xfs_log_grant_sleep);
 DEFINE_LOGGRANT_EVENT(xfs_log_grant_wake);
@@ -1011,12 +1009,13 @@ DEFINE_LOGGRANT_EVENT(xfs_log_reserve);
 DEFINE_LOGGRANT_EVENT(xfs_log_reserve_exit);
 DEFINE_LOGGRANT_EVENT(xfs_log_regrant);
 DEFINE_LOGGRANT_EVENT(xfs_log_regrant_exit);
-DEFINE_LOGGRANT_EVENT(xfs_log_regrant_reserve_enter);
-DEFINE_LOGGRANT_EVENT(xfs_log_regrant_reserve_exit);
-DEFINE_LOGGRANT_EVENT(xfs_log_regrant_reserve_sub);
-DEFINE_LOGGRANT_EVENT(xfs_log_ungrant_enter);
-DEFINE_LOGGRANT_EVENT(xfs_log_ungrant_exit);
-DEFINE_LOGGRANT_EVENT(xfs_log_ungrant_sub);
+DEFINE_LOGGRANT_EVENT(xfs_log_ticket_regrant);
+DEFINE_LOGGRANT_EVENT(xfs_log_ticket_regrant_exit);
+DEFINE_LOGGRANT_EVENT(xfs_log_ticket_regrant_sub);
+DEFINE_LOGGRANT_EVENT(xfs_log_ticket_ungrant);
+DEFINE_LOGGRANT_EVENT(xfs_log_ticket_ungrant_sub);
+DEFINE_LOGGRANT_EVENT(xfs_log_ticket_ungrant_exit);
+DEFINE_LOGGRANT_EVENT(xfs_log_cil_wait);
 
 DECLARE_EVENT_CLASS(xfs_log_item_class,
 	TP_PROTO(struct xfs_log_item *lip),
diff --git a/fs/xfs/xfs_trans.c b/fs/xfs/xfs_trans.c
index 1adc6bc..28b983f 100644
--- a/fs/xfs/xfs_trans.c
+++ b/fs/xfs/xfs_trans.c
@@ -9,6 +9,7 @@
 #include "xfs_shared.h"
 #include "xfs_format.h"
 #include "xfs_log_format.h"
+#include "xfs_log_priv.h"
 #include "xfs_trans_resv.h"
 #include "xfs_mount.h"
 #include "xfs_extent_busy.h"
@@ -150,8 +151,9 @@ xfs_trans_reserve(
 	uint			blocks,
 	uint			rtextents)
 {
-	int		error = 0;
-	bool		rsvd = (tp->t_flags & XFS_TRANS_RESERVE) != 0;
+	struct xfs_mount	*mp = tp->t_mountp;
+	int			error = 0;
+	bool			rsvd = (tp->t_flags & XFS_TRANS_RESERVE) != 0;
 
 	/* Mark this thread as being in a transaction */
 	current_set_flags_nested(&tp->t_pflags, PF_MEMALLOC_NOFS);
@@ -162,7 +164,7 @@ xfs_trans_reserve(
 	 * fail if the count would go below zero.
 	 */
 	if (blocks > 0) {
-		error = xfs_mod_fdblocks(tp->t_mountp, -((int64_t)blocks), rsvd);
+		error = xfs_mod_fdblocks(mp, -((int64_t)blocks), rsvd);
 		if (error != 0) {
 			current_restore_flags_nested(&tp->t_pflags, PF_MEMALLOC_NOFS);
 			return -ENOSPC;
@@ -191,9 +193,9 @@ xfs_trans_reserve(
 
 		if (tp->t_ticket != NULL) {
 			ASSERT(resp->tr_logflags & XFS_TRANS_PERM_LOG_RES);
-			error = xfs_log_regrant(tp->t_mountp, tp->t_ticket);
+			error = xfs_log_regrant(mp, tp->t_ticket);
 		} else {
-			error = xfs_log_reserve(tp->t_mountp,
+			error = xfs_log_reserve(mp,
 						resp->tr_logres,
 						resp->tr_logcount,
 						&tp->t_ticket, XFS_TRANSACTION,
@@ -213,7 +215,7 @@ xfs_trans_reserve(
 	 * fail if the count would go below zero.
 	 */
 	if (rtextents > 0) {
-		error = xfs_mod_frextents(tp->t_mountp, -((int64_t)rtextents));
+		error = xfs_mod_frextents(mp, -((int64_t)rtextents));
 		if (error) {
 			error = -ENOSPC;
 			goto undo_log;
@@ -229,7 +231,7 @@ xfs_trans_reserve(
 	 */
 undo_log:
 	if (resp->tr_logres > 0) {
-		xfs_log_done(tp->t_mountp, tp->t_ticket, NULL, false);
+		xfs_log_ticket_ungrant(mp->m_log, tp->t_ticket);
 		tp->t_ticket = NULL;
 		tp->t_log_res = 0;
 		tp->t_flags &= ~XFS_TRANS_PERM_LOG_RES;
@@ -237,7 +239,7 @@ xfs_trans_reserve(
 
 undo_blocks:
 	if (blocks > 0) {
-		xfs_mod_fdblocks(tp->t_mountp, (int64_t)blocks, rsvd);
+		xfs_mod_fdblocks(mp, (int64_t)blocks, rsvd);
 		tp->t_blk_res = 0;
 	}
 
@@ -1004,9 +1006,10 @@ __xfs_trans_commit(
 	 */
 	xfs_trans_unreserve_and_mod_dquots(tp);
 	if (tp->t_ticket) {
-		commit_lsn = xfs_log_done(mp, tp->t_ticket, NULL, regrant);
-		if (commit_lsn == -1 && !error)
-			error = -EIO;
+		if (regrant && !XLOG_FORCED_SHUTDOWN(mp->m_log))
+			xfs_log_ticket_regrant(mp->m_log, tp->t_ticket);
+		else
+			xfs_log_ticket_ungrant(mp->m_log, tp->t_ticket);
 		tp->t_ticket = NULL;
 	}
 	current_restore_flags_nested(&tp->t_pflags, PF_MEMALLOC_NOFS);
@@ -1065,7 +1068,7 @@ xfs_trans_cancel(
 	xfs_trans_unreserve_and_mod_dquots(tp);
 
 	if (tp->t_ticket) {
-		xfs_log_done(mp, tp->t_ticket, NULL, false);
+		xfs_log_ticket_ungrant(mp->m_log, tp->t_ticket);
 		tp->t_ticket = NULL;
 	}
 
diff --git a/fs/xfs/xfs_trans_ail.c b/fs/xfs/xfs_trans_ail.c
index 2ef0dfb..5642535 100644
--- a/fs/xfs/xfs_trans_ail.c
+++ b/fs/xfs/xfs_trans_ail.c
@@ -109,17 +109,25 @@ xfs_ail_next(
  * We need the AIL lock in order to get a coherent read of the lsn of the last
  * item in the AIL.
  */
+static xfs_lsn_t
+__xfs_ail_min_lsn(
+	struct xfs_ail		*ailp)
+{
+	struct xfs_log_item	*lip = xfs_ail_min(ailp);
+
+	if (lip)
+		return lip->li_lsn;
+	return 0;
+}
+
 xfs_lsn_t
 xfs_ail_min_lsn(
 	struct xfs_ail		*ailp)
 {
-	xfs_lsn_t		lsn = 0;
-	struct xfs_log_item	*lip;
+	xfs_lsn_t		lsn;
 
 	spin_lock(&ailp->ail_lock);
-	lip = xfs_ail_min(ailp);
-	if (lip)
-		lsn = lip->li_lsn;
+	lsn = __xfs_ail_min_lsn(ailp);
 	spin_unlock(&ailp->ail_lock);
 
 	return lsn;
@@ -681,6 +689,28 @@ xfs_ail_push_all_sync(
 	finish_wait(&ailp->ail_empty, &wait);
 }
 
+void
+xfs_ail_update_finish(
+	struct xfs_ail		*ailp,
+	xfs_lsn_t		old_lsn) __releases(ailp->ail_lock)
+{
+	struct xfs_mount	*mp = ailp->ail_mount;
+
+	/* if the tail lsn hasn't changed, don't do updates or wakeups. */
+	if (!old_lsn || old_lsn == __xfs_ail_min_lsn(ailp)) {
+		spin_unlock(&ailp->ail_lock);
+		return;
+	}
+
+	if (!XFS_FORCED_SHUTDOWN(mp))
+		xlog_assign_tail_lsn_locked(mp);
+
+	if (list_empty(&ailp->ail_head))
+		wake_up_all(&ailp->ail_empty);
+	spin_unlock(&ailp->ail_lock);
+	xfs_log_space_wake(mp);
+}
+
 /*
  * xfs_trans_ail_update - bulk AIL insertion operation.
  *
@@ -712,7 +742,7 @@ xfs_trans_ail_update_bulk(
 	xfs_lsn_t		lsn) __releases(ailp->ail_lock)
 {
 	struct xfs_log_item	*mlip;
-	int			mlip_changed = 0;
+	xfs_lsn_t		tail_lsn = 0;
 	int			i;
 	LIST_HEAD(tmp);
 
@@ -727,9 +757,10 @@ xfs_trans_ail_update_bulk(
 				continue;
 
 			trace_xfs_ail_move(lip, lip->li_lsn, lsn);
+			if (mlip == lip && !tail_lsn)
+				tail_lsn = lip->li_lsn;
+
 			xfs_ail_delete(ailp, lip);
-			if (mlip == lip)
-				mlip_changed = 1;
 		} else {
 			trace_xfs_ail_insert(lip, 0, lsn);
 		}
@@ -740,23 +771,23 @@ xfs_trans_ail_update_bulk(
 	if (!list_empty(&tmp))
 		xfs_ail_splice(ailp, cur, &tmp, lsn);
 
-	if (mlip_changed) {
-		if (!XFS_FORCED_SHUTDOWN(ailp->ail_mount))
-			xlog_assign_tail_lsn_locked(ailp->ail_mount);
-		spin_unlock(&ailp->ail_lock);
-
-		xfs_log_space_wake(ailp->ail_mount);
-	} else {
-		spin_unlock(&ailp->ail_lock);
-	}
+	xfs_ail_update_finish(ailp, tail_lsn);
 }
 
-bool
+/*
+ * Delete one log item from the AIL.
+ *
+ * If this item was at the tail of the AIL, return the LSN of the log item so
+ * that we can use it to check if the LSN of the tail of the log has moved
+ * when finishing up the AIL delete process in xfs_ail_update_finish().
+ */
+xfs_lsn_t
 xfs_ail_delete_one(
 	struct xfs_ail		*ailp,
 	struct xfs_log_item	*lip)
 {
 	struct xfs_log_item	*mlip = xfs_ail_min(ailp);
+	xfs_lsn_t		lsn = lip->li_lsn;
 
 	trace_xfs_ail_delete(lip, mlip->li_lsn, lip->li_lsn);
 	xfs_ail_delete(ailp, lip);
@@ -764,7 +795,9 @@ xfs_ail_delete_one(
 	clear_bit(XFS_LI_IN_AIL, &lip->li_flags);
 	lip->li_lsn = 0;
 
-	return mlip == lip;
+	if (mlip == lip)
+		return lsn;
+	return 0;
 }
 
 /**
@@ -792,10 +825,10 @@ void
 xfs_trans_ail_delete(
 	struct xfs_ail		*ailp,
 	struct xfs_log_item	*lip,
-	int			shutdown_type) __releases(ailp->ail_lock)
+	int			shutdown_type)
 {
 	struct xfs_mount	*mp = ailp->ail_mount;
-	bool			mlip_changed;
+	xfs_lsn_t		tail_lsn;
 
 	if (!test_bit(XFS_LI_IN_AIL, &lip->li_flags)) {
 		spin_unlock(&ailp->ail_lock);
@@ -808,17 +841,8 @@ xfs_trans_ail_delete(
 		return;
 	}
 
-	mlip_changed = xfs_ail_delete_one(ailp, lip);
-	if (mlip_changed) {
-		if (!XFS_FORCED_SHUTDOWN(mp))
-			xlog_assign_tail_lsn_locked(mp);
-		if (list_empty(&ailp->ail_head))
-			wake_up_all(&ailp->ail_empty);
-	}
-
-	spin_unlock(&ailp->ail_lock);
-	if (mlip_changed)
-		xfs_log_space_wake(ailp->ail_mount);
+	tail_lsn = xfs_ail_delete_one(ailp, lip);
+	xfs_ail_update_finish(ailp, tail_lsn);
 }
 
 int
diff --git a/fs/xfs/xfs_trans_priv.h b/fs/xfs/xfs_trans_priv.h
index 2e073c1..35655ea 100644
--- a/fs/xfs/xfs_trans_priv.h
+++ b/fs/xfs/xfs_trans_priv.h
@@ -91,9 +91,11 @@ xfs_trans_ail_update(
 	xfs_trans_ail_update_bulk(ailp, NULL, &lip, 1, lsn);
 }
 
-bool xfs_ail_delete_one(struct xfs_ail *ailp, struct xfs_log_item *lip);
+xfs_lsn_t xfs_ail_delete_one(struct xfs_ail *ailp, struct xfs_log_item *lip);
+void xfs_ail_update_finish(struct xfs_ail *ailp, xfs_lsn_t old_lsn)
+			__releases(ailp->ail_lock);
 void xfs_trans_ail_delete(struct xfs_ail *ailp, struct xfs_log_item *lip,
-		int shutdown_type) __releases(ailp->ail_lock);
+		int shutdown_type);
 
 static inline void
 xfs_trans_ail_remove(
diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h
index 87fc14e..49b519f 100644
--- a/include/acpi/acpixf.h
+++ b/include/acpi/acpixf.h
@@ -12,7 +12,7 @@
 
 /* Current ACPICA subsystem version in YYYYMMDD format */
 
-#define ACPI_CA_VERSION                 0x20200214
+#define ACPI_CA_VERSION                 0x20200326
 
 #include <acpi/acconfig.h>
 #include <acpi/actypes.h>
diff --git a/include/acpi/actbl2.h b/include/acpi/actbl2.h
index b818ba6..ec66779 100644
--- a/include/acpi/actbl2.h
+++ b/include/acpi/actbl2.h
@@ -43,6 +43,7 @@
 #define ACPI_SIG_SBST           "SBST"	/* Smart Battery Specification Table */
 #define ACPI_SIG_SDEI           "SDEI"	/* Software Delegated Exception Interface Table */
 #define ACPI_SIG_SDEV           "SDEV"	/* Secure Devices table */
+#define ACPI_SIG_NHLT           "NHLT"	/* Non-HDAudio Link Table */
 
 /*
  * All tables must be byte-packed to match the ACPI specification, since
@@ -274,7 +275,8 @@ struct acpi_ivrs_header {
 /* Values for subtable Type above */
 
 enum acpi_ivrs_type {
-	ACPI_IVRS_TYPE_HARDWARE = 0x10,
+	ACPI_IVRS_TYPE_HARDWARE1 = 0x10,
+	ACPI_IVRS_TYPE_HARDWARE2 = 0x11,
 	ACPI_IVRS_TYPE_MEMORY1 = 0x20,
 	ACPI_IVRS_TYPE_MEMORY2 = 0x21,
 	ACPI_IVRS_TYPE_MEMORY3 = 0x22
@@ -301,13 +303,26 @@ enum acpi_ivrs_type {
 
 /* 0x10: I/O Virtualization Hardware Definition Block (IVHD) */
 
-struct acpi_ivrs_hardware {
+struct acpi_ivrs_hardware_10 {
 	struct acpi_ivrs_header header;
 	u16 capability_offset;	/* Offset for IOMMU control fields */
 	u64 base_address;	/* IOMMU control registers */
 	u16 pci_segment_group;
 	u16 info;		/* MSI number and unit ID */
-	u32 reserved;
+	u32 feature_reporting;
+};
+
+/* 0x11: I/O Virtualization Hardware Definition Block (IVHD) */
+
+struct acpi_ivrs_hardware_11 {
+	struct acpi_ivrs_header header;
+	u16 capability_offset;	/* Offset for IOMMU control fields */
+	u64 base_address;	/* IOMMU control registers */
+	u16 pci_segment_group;
+	u16 info;		/* MSI number and unit ID */
+	u32 attributes;
+	u64 efr_register_image;
+	u64 reserved;
 };
 
 /* Masks for Info field above */
diff --git a/include/acpi/actbl3.h b/include/acpi/actbl3.h
index 2bf3baf..b0b163b 100644
--- a/include/acpi/actbl3.h
+++ b/include/acpi/actbl3.h
@@ -39,7 +39,7 @@
 #define ACPI_SIG_WDDT           "WDDT"	/* Watchdog Timer Description Table */
 #define ACPI_SIG_WDRT           "WDRT"	/* Watchdog Resource Table */
 #define ACPI_SIG_WPBT           "WPBT"	/* Windows Platform Binary Table */
-#define ACPI_SIG_WSMT           "WSMT"	/* Windows SMM Security Migrations Table */
+#define ACPI_SIG_WSMT           "WSMT"	/* Windows SMM Security Mitigations Table */
 #define ACPI_SIG_XENV           "XENV"	/* Xen Environment table */
 #define ACPI_SIG_XXXX           "XXXX"	/* Intermediate AML header for ASL/ASL+ converter */
 
@@ -673,10 +673,10 @@ struct acpi_table_wpbt {
 
 /*******************************************************************************
  *
- * WSMT - Windows SMM Security Migrations Table
+ * WSMT - Windows SMM Security Mitigations Table
  *        Version 1
  *
- * Conforms to "Windows SMM Security Migrations Table",
+ * Conforms to "Windows SMM Security Mitigations Table",
  * Version 1.0, April 18, 2016
  *
  ******************************************************************************/
diff --git a/include/acpi/acuuid.h b/include/acpi/acuuid.h
index 9dd4689..9e1367b 100644
--- a/include/acpi/acuuid.h
+++ b/include/acpi/acuuid.h
@@ -57,4 +57,4 @@
 #define UUID_THERMAL_EXTENSIONS         "14d399cd-7a27-4b18-8fb4-7cb7b9f4e500"
 #define UUID_DEVICE_PROPERTIES          "daffd814-6eba-4d8c-8a91-bc9bbf4aa301"
 
-#endif				/* __AUUID_H__ */
+#endif				/* __ACUUID_H__ */
diff --git a/include/acpi/processor.h b/include/acpi/processor.h
index 4780517..683e124 100644
--- a/include/acpi/processor.h
+++ b/include/acpi/processor.h
@@ -297,6 +297,14 @@ static inline void acpi_processor_ffh_cstate_enter(struct acpi_processor_cx
 }
 #endif
 
+static inline int call_on_cpu(int cpu, long (*fn)(void *), void *arg,
+			      bool direct)
+{
+	if (direct || (is_percpu_thread() && cpu == smp_processor_id()))
+		return fn(arg);
+	return work_on_cpu(cpu, fn, arg);
+}
+
 /* in processor_perflib.c */
 
 #ifdef CONFIG_CPU_FREQ
diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
index 19eadac..aea9aee 100644
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
@@ -2,10 +2,8 @@
 #ifndef _ASM_GENERIC_GPIO_H
 #define _ASM_GENERIC_GPIO_H
 
-#include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/errno.h>
-#include <linux/of.h>
 
 #ifdef CONFIG_GPIOLIB
 
@@ -140,6 +138,8 @@ static inline void gpio_unexport(unsigned gpio)
 
 #else	/* !CONFIG_GPIOLIB */
 
+#include <linux/kernel.h>
+
 static inline bool gpio_is_valid(int number)
 {
 	/* only non-negative numbers are valid */
diff --git a/include/asm-generic/mshyperv.h b/include/asm-generic/mshyperv.h
index b3f1082..1c4fd95 100644
--- a/include/asm-generic/mshyperv.h
+++ b/include/asm-generic/mshyperv.h
@@ -163,7 +163,7 @@ static inline int cpumask_to_vpset(struct hv_vpset *vpset,
 	return nr_bank;
 }
 
-void hyperv_report_panic(struct pt_regs *regs, long err);
+void hyperv_report_panic(struct pt_regs *regs, long err, bool in_die);
 void hyperv_report_panic_msg(phys_addr_t pa, size_t size);
 bool hv_is_hyperv_initialized(void);
 bool hv_is_hibernation_supported(void);
diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h
index e2e2bef..329b8c8 100644
--- a/include/asm-generic/pgtable.h
+++ b/include/asm-generic/pgtable.h
@@ -10,6 +10,7 @@
 #include <linux/mm_types.h>
 #include <linux/bug.h>
 #include <linux/errno.h>
+#include <asm-generic/pgtable_uffd.h>
 
 #if 5 - defined(__PAGETABLE_P4D_FOLDED) - defined(__PAGETABLE_PUD_FOLDED) - \
 	defined(__PAGETABLE_PMD_FOLDED) != CONFIG_PGTABLE_LEVELS
diff --git a/include/asm-generic/pgtable_uffd.h b/include/asm-generic/pgtable_uffd.h
new file mode 100644
index 0000000..828966d
--- /dev/null
+++ b/include/asm-generic/pgtable_uffd.h
@@ -0,0 +1,66 @@
+#ifndef _ASM_GENERIC_PGTABLE_UFFD_H
+#define _ASM_GENERIC_PGTABLE_UFFD_H
+
+#ifndef CONFIG_HAVE_ARCH_USERFAULTFD_WP
+static __always_inline int pte_uffd_wp(pte_t pte)
+{
+	return 0;
+}
+
+static __always_inline int pmd_uffd_wp(pmd_t pmd)
+{
+	return 0;
+}
+
+static __always_inline pte_t pte_mkuffd_wp(pte_t pte)
+{
+	return pte;
+}
+
+static __always_inline pmd_t pmd_mkuffd_wp(pmd_t pmd)
+{
+	return pmd;
+}
+
+static __always_inline pte_t pte_clear_uffd_wp(pte_t pte)
+{
+	return pte;
+}
+
+static __always_inline pmd_t pmd_clear_uffd_wp(pmd_t pmd)
+{
+	return pmd;
+}
+
+static __always_inline pte_t pte_swp_mkuffd_wp(pte_t pte)
+{
+	return pte;
+}
+
+static __always_inline int pte_swp_uffd_wp(pte_t pte)
+{
+	return 0;
+}
+
+static __always_inline pte_t pte_swp_clear_uffd_wp(pte_t pte)
+{
+	return pte;
+}
+
+static inline pmd_t pmd_swp_mkuffd_wp(pmd_t pmd)
+{
+	return pmd;
+}
+
+static inline int pmd_swp_uffd_wp(pmd_t pmd)
+{
+	return 0;
+}
+
+static inline pmd_t pmd_swp_clear_uffd_wp(pmd_t pmd)
+{
+	return pmd;
+}
+#endif /* CONFIG_HAVE_ARCH_USERFAULTFD_WP */
+
+#endif /* _ASM_GENERIC_PGTABLE_UFFD_H */
diff --git a/include/asm-generic/tlb.h b/include/asm-generic/tlb.h
index f391f6b..3f1649a 100644
--- a/include/asm-generic/tlb.h
+++ b/include/asm-generic/tlb.h
@@ -13,6 +13,7 @@
 
 #include <linux/mmu_notifier.h>
 #include <linux/swap.h>
+#include <linux/hugetlb_inline.h>
 #include <asm/pgalloc.h>
 #include <asm/tlbflush.h>
 #include <asm/cacheflush.h>
@@ -398,7 +399,7 @@ tlb_update_vma_flags(struct mmu_gather *tlb, struct vm_area_struct *vma)
 	 * We rely on tlb_end_vma() to issue a flush, such that when we reset
 	 * these values the batch is empty.
 	 */
-	tlb->vma_huge = !!(vma->vm_flags & VM_HUGETLB);
+	tlb->vma_huge = is_vm_hugetlb_page(vma);
 	tlb->vma_exec = !!(vma->vm_flags & VM_EXEC);
 }
 
diff --git a/include/clocksource/timer-ti-dm.h b/include/clocksource/timer-ti-dm.h
index 25f0523..531ca87 100644
--- a/include/clocksource/timer-ti-dm.h
+++ b/include/clocksource/timer-ti-dm.h
@@ -248,8 +248,7 @@ int omap_dm_timers_active(void);
 
 /*
  * The below are inlined to optimize code size for system timers. Other code
- * should not need these at all, see
- * include/linux/platform_data/pwm_omap_dmtimer.h
+ * should not need these at all.
  */
 #if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP2PLUS)
 static inline u32 __omap_dm_timer_read(struct omap_dm_timer *timer, u32 reg,
diff --git a/include/crypto/curve25519.h b/include/crypto/curve25519.h
index 9ecb3c1..4e6dc84 100644
--- a/include/crypto/curve25519.h
+++ b/include/crypto/curve25519.h
@@ -33,8 +33,7 @@ bool __must_check curve25519(u8 mypublic[CURVE25519_KEY_SIZE],
 			     const u8 secret[CURVE25519_KEY_SIZE],
 			     const u8 basepoint[CURVE25519_KEY_SIZE])
 {
-	if (IS_ENABLED(CONFIG_CRYPTO_ARCH_HAVE_LIB_CURVE25519) &&
-	    (!IS_ENABLED(CONFIG_CRYPTO_CURVE25519_X86) || IS_ENABLED(CONFIG_AS_ADX)))
+	if (IS_ENABLED(CONFIG_CRYPTO_ARCH_HAVE_LIB_CURVE25519))
 		curve25519_arch(mypublic, secret, basepoint);
 	else
 		curve25519_generic(mypublic, secret, basepoint);
@@ -50,8 +49,7 @@ __must_check curve25519_generate_public(u8 pub[CURVE25519_KEY_SIZE],
 				    CURVE25519_KEY_SIZE)))
 		return false;
 
-	if (IS_ENABLED(CONFIG_CRYPTO_ARCH_HAVE_LIB_CURVE25519) &&
-	    (!IS_ENABLED(CONFIG_CRYPTO_CURVE25519_X86) || IS_ENABLED(CONFIG_AS_ADX)))
+	if (IS_ENABLED(CONFIG_CRYPTO_ARCH_HAVE_LIB_CURVE25519))
 		curve25519_base_arch(pub, secret);
 	else
 		curve25519_generic(pub, secret, curve25519_base_point);
diff --git a/include/drm/bridge/analogix_dp.h b/include/drm/bridge/analogix_dp.h
index 7aa2f93..b0dcc07 100644
--- a/include/drm/bridge/analogix_dp.h
+++ b/include/drm/bridge/analogix_dp.h
@@ -42,9 +42,10 @@ int analogix_dp_resume(struct analogix_dp_device *dp);
 int analogix_dp_suspend(struct analogix_dp_device *dp);
 
 struct analogix_dp_device *
-analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
-		 struct analogix_dp_plat_data *plat_data);
+analogix_dp_probe(struct device *dev, struct analogix_dp_plat_data *plat_data);
+int analogix_dp_bind(struct analogix_dp_device *dp, struct drm_device *drm_dev);
 void analogix_dp_unbind(struct analogix_dp_device *dp);
+void analogix_dp_remove(struct analogix_dp_device *dp);
 
 int analogix_dp_start_crc(struct drm_connector *connector);
 int analogix_dp_stop_crc(struct drm_connector *connector);
diff --git a/include/drm/drm_file.h b/include/drm/drm_file.h
index 19df802..5aaf1c4 100644
--- a/include/drm/drm_file.h
+++ b/include/drm/drm_file.h
@@ -391,4 +391,13 @@ void drm_send_event(struct drm_device *dev, struct drm_pending_event *e);
 
 struct file *mock_drm_getfile(struct drm_minor *minor, unsigned int flags);
 
+#ifdef CONFIG_MMU
+struct drm_vma_offset_manager;
+unsigned long drm_get_unmapped_area(struct file *file,
+				    unsigned long uaddr, unsigned long len,
+				    unsigned long pgoff, unsigned long flags,
+				    struct drm_vma_offset_manager *mgr);
+#endif /* CONFIG_MMU */
+
+
 #endif /* _DRM_FILE_H_ */
diff --git a/include/drm/drm_legacy.h b/include/drm/drm_legacy.h
index dcef359..aed382c 100644
--- a/include/drm/drm_legacy.h
+++ b/include/drm/drm_legacy.h
@@ -136,7 +136,7 @@ struct drm_sg_mem {
  * Kernel side of a mapping
  */
 struct drm_local_map {
-	resource_size_t offset;	 /**< Requested physical address (0 for SAREA)*/
+	dma_addr_t offset;	 /**< Requested physical address (0 for SAREA)*/
 	unsigned long size;	 /**< Requested physical size (bytes) */
 	enum drm_map_type type;	 /**< Type of memory to map */
 	enum drm_map_flags flags;	 /**< Flags */
diff --git a/include/drm/ttm/ttm_bo_api.h b/include/drm/ttm/ttm_bo_api.h
index b9bc1b0..0a9d042 100644
--- a/include/drm/ttm/ttm_bo_api.h
+++ b/include/drm/ttm/ttm_bo_api.h
@@ -727,7 +727,8 @@ vm_fault_t ttm_bo_vm_reserve(struct ttm_buffer_object *bo,
 
 vm_fault_t ttm_bo_vm_fault_reserved(struct vm_fault *vmf,
 				    pgprot_t prot,
-				    pgoff_t num_prefault);
+				    pgoff_t num_prefault,
+				    pgoff_t fault_page_size);
 
 vm_fault_t ttm_bo_vm_fault(struct vm_fault *vmf);
 
diff --git a/include/dt-bindings/arm/coresight-cti-dt.h b/include/dt-bindings/arm/coresight-cti-dt.h
new file mode 100644
index 0000000..61e7bdf
--- /dev/null
+++ b/include/dt-bindings/arm/coresight-cti-dt.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This header provides constants for the defined trigger signal
+ * types on CoreSight CTI.
+ */
+
+#ifndef _DT_BINDINGS_ARM_CORESIGHT_CTI_DT_H
+#define _DT_BINDINGS_ARM_CORESIGHT_CTI_DT_H
+
+#define GEN_IO		0
+#define GEN_INTREQ	1
+#define GEN_INTACK	2
+#define GEN_HALTREQ	3
+#define GEN_RESTARTREQ	4
+#define PE_EDBGREQ	5
+#define PE_DBGRESTART	6
+#define PE_CTIIRQ	7
+#define PE_PMUIRQ	8
+#define PE_DBGTRIGGER	9
+#define ETM_EXTOUT	10
+#define ETM_EXTIN	11
+#define SNK_FULL	12
+#define SNK_ACQCOMP	13
+#define SNK_FLUSHCOMP	14
+#define SNK_FLUSHIN	15
+#define SNK_TRIGIN	16
+#define STM_ASYNCOUT	17
+#define STM_TOUT_SPTE	18
+#define STM_TOUT_SW	19
+#define STM_TOUT_HETE	20
+#define STM_HWEVENT	21
+#define ELA_TSTART	22
+#define ELA_TSTOP	23
+#define ELA_DBGREQ	24
+#define CTI_TRIG_MAX	25
+
+#endif /*_DT_BINDINGS_ARM_CORESIGHT_CTI_DT_H */
diff --git a/include/dt-bindings/bus/ti-sysc.h b/include/dt-bindings/bus/ti-sysc.h
index babd08a..76b0782 100644
--- a/include/dt-bindings/bus/ti-sysc.h
+++ b/include/dt-bindings/bus/ti-sysc.h
@@ -18,6 +18,10 @@
 
 #define SYSC_DRA7_MCAN_ENAWAKEUP	(1 << 4)
 
+/* PRUSS sysc found on AM33xx/AM43xx/AM57xx */
+#define SYSC_PRUSS_SUB_MWAIT		(1 << 5)
+#define SYSC_PRUSS_STANDBY_INIT		(1 << 4)
+
 /* SYSCONFIG STANDBYMODE/MIDLEMODE/SIDLEMODE supported by hardware */
 #define SYSC_IDLE_FORCE			0
 #define SYSC_IDLE_NO			1
diff --git a/include/dt-bindings/clock/dm814.h b/include/dt-bindings/clock/dm814.h
index f0f04e0..33b8826 100644
--- a/include/dt-bindings/clock/dm814.h
+++ b/include/dt-bindings/clock/dm814.h
@@ -34,4 +34,9 @@
 #define DM814_MMC2_CLKCTRL	DM814_CLKCTRL_INDEX(0x220)
 #define DM814_MMC3_CLKCTRL	DM814_CLKCTRL_INDEX(0x224)
 
+/* alwon_ethernet clocks */
+#define DM814_ETHERNET_CLKCTRL_OFFSET	0x1d4
+#define DM814_ETHERNET_CLKCTRL_INDEX(offset)	((offset) - DM814_ETHERNET_CLKCTRL_OFFSET)
+#define DM814_ETHERNET_CPGMAC0_CLKCTRL	DM814_ETHERNET_CLKCTRL_INDEX(0x1d4)
+
 #endif
diff --git a/include/dt-bindings/clock/g12a-clkc.h b/include/dt-bindings/clock/g12a-clkc.h
index 0837c1a..b0d65d7 100644
--- a/include/dt-bindings/clock/g12a-clkc.h
+++ b/include/dt-bindings/clock/g12a-clkc.h
@@ -143,5 +143,7 @@
 #define CLKID_CPU1_CLK				253
 #define CLKID_CPU2_CLK				254
 #define CLKID_CPU3_CLK				255
+#define CLKID_SPICC0_SCLK			258
+#define CLKID_SPICC1_SCLK			261
 
 #endif /* __G12A_CLKC_H */
diff --git a/include/dt-bindings/clock/gxbb-clkc.h b/include/dt-bindings/clock/gxbb-clkc.h
index db0763e..4073eb7 100644
--- a/include/dt-bindings/clock/gxbb-clkc.h
+++ b/include/dt-bindings/clock/gxbb-clkc.h
@@ -146,5 +146,6 @@
 #define CLKID_CTS_VDAC		201
 #define CLKID_HDMI_TX		202
 #define CLKID_HDMI		205
+#define CLKID_ACODEC		206
 
 #endif /* __GXBB_CLKC_H */
diff --git a/include/dt-bindings/clock/imx7d-clock.h b/include/dt-bindings/clock/imx7d-clock.h
index e6a670e..1d4c0df 100644
--- a/include/dt-bindings/clock/imx7d-clock.h
+++ b/include/dt-bindings/clock/imx7d-clock.h
@@ -451,5 +451,6 @@
 #define IMX7D_SNVS_CLK			442
 #define IMX7D_CAAM_CLK			443
 #define IMX7D_KPP_ROOT_CLK		444
-#define IMX7D_CLK_END			445
+#define IMX7D_PXP_CLK			445
+#define IMX7D_CLK_END			446
 #endif /* __DT_BINDINGS_CLOCK_IMX7D_H */
diff --git a/include/dt-bindings/clock/imx8mm-clock.h b/include/dt-bindings/clock/imx8mm-clock.h
index edeece2..e63a553 100644
--- a/include/dt-bindings/clock/imx8mm-clock.h
+++ b/include/dt-bindings/clock/imx8mm-clock.h
@@ -265,6 +265,15 @@
 #define IMX8MM_SYS_PLL2_333M_CG			244
 #define IMX8MM_SYS_PLL2_500M_CG			245
 
-#define IMX8MM_CLK_END				246
+#define IMX8MM_CLK_M4_CORE			246
+#define IMX8MM_CLK_VPU_CORE			247
+#define IMX8MM_CLK_GPU3D_CORE			248
+#define IMX8MM_CLK_GPU2D_CORE			249
+
+#define IMX8MM_CLK_CLKO2			250
+
+#define IMX8MM_CLK_A53_CORE			251
+
+#define IMX8MM_CLK_END				252
 
 #endif
diff --git a/include/dt-bindings/clock/imx8mn-clock.h b/include/dt-bindings/clock/imx8mn-clock.h
index 65ac6eb6..621ea0e 100644
--- a/include/dt-bindings/clock/imx8mn-clock.h
+++ b/include/dt-bindings/clock/imx8mn-clock.h
@@ -228,6 +228,12 @@
 #define IMX8MN_SYS_PLL2_333M_CG			209
 #define IMX8MN_SYS_PLL2_500M_CG			210
 
-#define IMX8MN_CLK_END				211
+#define IMX8MN_CLK_SNVS_ROOT			211
+#define IMX8MN_CLK_GPU_CORE			212
+#define IMX8MN_CLK_GPU_SHADER			213
+
+#define IMX8MN_CLK_A53_CORE			214
+
+#define IMX8MN_CLK_END				215
 
 #endif
diff --git a/include/dt-bindings/clock/imx8mp-clock.h b/include/dt-bindings/clock/imx8mp-clock.h
index 2fab631..47ab082 100644
--- a/include/dt-bindings/clock/imx8mp-clock.h
+++ b/include/dt-bindings/clock/imx8mp-clock.h
@@ -173,7 +173,7 @@
 #define IMX8MP_CLK_IPP_DO_CLKO1			164
 #define IMX8MP_CLK_IPP_DO_CLKO2			165
 #define IMX8MP_CLK_HDMI_FDCC_TST		166
-#define IMX8MP_CLK_HDMI_27M			167
+#define IMX8MP_CLK_HDMI_24M			167
 #define IMX8MP_CLK_HDMI_REF_266M		168
 #define IMX8MP_CLK_USDHC3			169
 #define IMX8MP_CLK_MEDIA_CAM1_PIX		170
@@ -294,7 +294,8 @@
 #define IMX8MP_CLK_DRAM_ALT_ROOT		285
 #define IMX8MP_CLK_DRAM_CORE			286
 #define IMX8MP_CLK_ARM				287
+#define IMX8MP_CLK_A53_CORE			288
 
-#define IMX8MP_CLK_END				288
+#define IMX8MP_CLK_END				289
 
 #endif
diff --git a/include/dt-bindings/clock/imx8mq-clock.h b/include/dt-bindings/clock/imx8mq-clock.h
index 3bab9b2..9b8045d 100644
--- a/include/dt-bindings/clock/imx8mq-clock.h
+++ b/include/dt-bindings/clock/imx8mq-clock.h
@@ -424,6 +424,13 @@
 #define IMX8MQ_SYS2_PLL_500M_CG			283
 #define IMX8MQ_SYS2_PLL_1000M_CG		284
 
-#define IMX8MQ_CLK_END				285
+#define IMX8MQ_CLK_GPU_CORE			285
+#define IMX8MQ_CLK_GPU_SHADER			286
+#define IMX8MQ_CLK_M4_CORE			287
+#define IMX8MQ_CLK_VPU_CORE			288
+
+#define IMX8MQ_CLK_A53_CORE			289
+
+#define IMX8MQ_CLK_END				290
 
 #endif /* __DT_BINDINGS_CLOCK_IMX8MQ_H */
diff --git a/include/dt-bindings/clock/k210-clk.h b/include/dt-bindings/clock/k210-clk.h
new file mode 100644
index 0000000..5a2fd64
--- /dev/null
+++ b/include/dt-bindings/clock/k210-clk.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com>
+ * Copyright (c) 2020 Western Digital Corporation or its affiliates.
+ */
+#ifndef K210_CLK_H
+#define K210_CLK_H
+
+/*
+ * Arbitrary identifiers for clocks.
+ * The structure is: in0 -> pll0 -> aclk -> cpu
+ *
+ * Since we use the hardware defaults for now, set all these to the same clock.
+ */
+#define K210_CLK_PLL0   0
+#define K210_CLK_PLL1   0
+#define K210_CLK_ACLK   0
+#define K210_CLK_CPU    0
+
+#endif /* K210_CLK_H */
diff --git a/include/dt-bindings/clock/marvell,mmp2.h b/include/dt-bindings/clock/marvell,mmp2.h
index 4b1a772..06bb7fe 100644
--- a/include/dt-bindings/clock/marvell,mmp2.h
+++ b/include/dt-bindings/clock/marvell,mmp2.h
@@ -26,6 +26,9 @@
 #define MMP2_CLK_VCTCXO_4		25
 #define MMP2_CLK_UART_PLL		26
 #define MMP2_CLK_USB_PLL		27
+#define MMP3_CLK_PLL1_P			28
+#define MMP3_CLK_PLL2_P			29
+#define MMP3_CLK_PLL3			30
 
 /* apb periphrals */
 #define MMP2_CLK_TWSI0			60
@@ -50,6 +53,10 @@
 #define MMP2_CLK_SSP2			79
 #define MMP2_CLK_SSP3			80
 #define MMP2_CLK_TIMER			81
+#define MMP2_CLK_THERMAL0		82
+#define MMP3_CLK_THERMAL1		83
+#define MMP3_CLK_THERMAL2		84
+#define MMP3_CLK_THERMAL3		85
 
 /* axi periphrals */
 #define MMP2_CLK_SDH0			101
@@ -74,6 +81,12 @@
 #define MMP2_CLK_DISP0_LCDC		120
 #define MMP2_CLK_USBHSIC0		121
 #define MMP2_CLK_USBHSIC1		122
+#define MMP2_CLK_GPU_BUS		123
+#define MMP3_CLK_GPU_BUS		MMP2_CLK_GPU_BUS
+#define MMP2_CLK_GPU_3D			124
+#define MMP3_CLK_GPU_3D			MMP2_CLK_GPU_3D
+#define MMP3_CLK_GPU_2D			125
+#define MMP3_CLK_SDH4			126
 
 #define MMP2_NR_CLKS			200
 #endif
diff --git a/include/dt-bindings/clock/qcom,gcc-sc7180.h b/include/dt-bindings/clock/qcom,gcc-sc7180.h
index e8029b2e..1258fd0 100644
--- a/include/dt-bindings/clock/qcom,gcc-sc7180.h
+++ b/include/dt-bindings/clock/qcom,gcc-sc7180.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 /*
- * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
  */
 
 #ifndef _DT_BINDINGS_CLK_QCOM_GCC_SC7180_H
@@ -132,6 +132,11 @@
 #define GCC_VIDEO_GPLL0_DIV_CLK_SRC				122
 #define GCC_VIDEO_THROTTLE_AXI_CLK				123
 #define GCC_VIDEO_XO_CLK					124
+#define GCC_MSS_CFG_AHB_CLK					125
+#define GCC_MSS_MFAB_AXIS_CLK					126
+#define GCC_MSS_NAV_AXI_CLK					127
+#define GCC_MSS_Q6_MEMNOC_AXI_CLK				128
+#define GCC_MSS_SNOC_AXI_CLK					129
 
 /* GCC resets */
 #define GCC_QUSB2PHY_PRIM_BCR					0
diff --git a/include/dt-bindings/clock/qcom,gcc-sm8150.h b/include/dt-bindings/clock/qcom,gcc-sm8150.h
index 90d60ef..3e1a918 100644
--- a/include/dt-bindings/clock/qcom,gcc-sm8150.h
+++ b/include/dt-bindings/clock/qcom,gcc-sm8150.h
@@ -240,4 +240,8 @@
 #define GCC_USB30_SEC_BCR					27
 #define GCC_USB_PHY_CFG_AHB2PHY_BCR				28
 
+/* GCC GDSCRs */
+#define USB30_PRIM_GDSC                     4
+#define USB30_SEC_GDSC						5
+
 #endif
diff --git a/include/dt-bindings/clock/qcom,gcc-sm8250.h b/include/dt-bindings/clock/qcom,gcc-sm8250.h
new file mode 100644
index 0000000..7b7abe3
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,gcc-sm8250.h
@@ -0,0 +1,271 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_GCC_SM8250_H
+#define _DT_BINDINGS_CLK_QCOM_GCC_SM8250_H
+
+/* GCC clocks */
+#define GPLL0							0
+#define GPLL0_OUT_EVEN						1
+#define GPLL4							2
+#define GPLL9							3
+#define GCC_AGGRE_NOC_PCIE_TBU_CLK				4
+#define GCC_AGGRE_UFS_CARD_AXI_CLK				5
+#define GCC_AGGRE_UFS_PHY_AXI_CLK				6
+#define GCC_AGGRE_USB3_PRIM_AXI_CLK				7
+#define GCC_AGGRE_USB3_SEC_AXI_CLK				8
+#define GCC_BOOT_ROM_AHB_CLK					9
+#define GCC_CAMERA_AHB_CLK					10
+#define GCC_CAMERA_HF_AXI_CLK					11
+#define GCC_CAMERA_SF_AXI_CLK					12
+#define GCC_CAMERA_XO_CLK					13
+#define GCC_CFG_NOC_USB3_PRIM_AXI_CLK				14
+#define GCC_CFG_NOC_USB3_SEC_AXI_CLK				15
+#define GCC_CPUSS_AHB_CLK					16
+#define GCC_CPUSS_AHB_CLK_SRC					17
+#define GCC_CPUSS_AHB_POSTDIV_CLK_SRC				18
+#define GCC_CPUSS_DVM_BUS_CLK					19
+#define GCC_CPUSS_RBCPR_CLK					20
+#define GCC_DDRSS_GPU_AXI_CLK					21
+#define GCC_DDRSS_PCIE_SF_TBU_CLK				22
+#define GCC_DISP_AHB_CLK					23
+#define GCC_DISP_HF_AXI_CLK					24
+#define GCC_DISP_SF_AXI_CLK					25
+#define GCC_DISP_XO_CLK						26
+#define GCC_GP1_CLK						27
+#define GCC_GP1_CLK_SRC						28
+#define GCC_GP2_CLK						29
+#define GCC_GP2_CLK_SRC						30
+#define GCC_GP3_CLK						31
+#define GCC_GP3_CLK_SRC						32
+#define GCC_GPU_CFG_AHB_CLK					33
+#define GCC_GPU_GPLL0_CLK_SRC					34
+#define GCC_GPU_GPLL0_DIV_CLK_SRC				35
+#define GCC_GPU_IREF_EN						36
+#define GCC_GPU_MEMNOC_GFX_CLK					37
+#define GCC_GPU_SNOC_DVM_GFX_CLK				38
+#define GCC_NPU_AXI_CLK						39
+#define GCC_NPU_BWMON_AXI_CLK					40
+#define GCC_NPU_BWMON_CFG_AHB_CLK				41
+#define GCC_NPU_CFG_AHB_CLK					42
+#define GCC_NPU_DMA_CLK						43
+#define GCC_NPU_GPLL0_CLK_SRC					44
+#define GCC_NPU_GPLL0_DIV_CLK_SRC				45
+#define GCC_PCIE0_PHY_REFGEN_CLK				46
+#define GCC_PCIE1_PHY_REFGEN_CLK				47
+#define GCC_PCIE2_PHY_REFGEN_CLK				48
+#define GCC_PCIE_0_AUX_CLK					49
+#define GCC_PCIE_0_AUX_CLK_SRC					50
+#define GCC_PCIE_0_CFG_AHB_CLK					51
+#define GCC_PCIE_0_MSTR_AXI_CLK					52
+#define GCC_PCIE_0_PIPE_CLK					53
+#define GCC_PCIE_0_SLV_AXI_CLK					54
+#define GCC_PCIE_0_SLV_Q2A_AXI_CLK				55
+#define GCC_PCIE_1_AUX_CLK					56
+#define GCC_PCIE_1_AUX_CLK_SRC					57
+#define GCC_PCIE_1_CFG_AHB_CLK					58
+#define GCC_PCIE_1_MSTR_AXI_CLK					59
+#define GCC_PCIE_1_PIPE_CLK					60
+#define GCC_PCIE_1_SLV_AXI_CLK					61
+#define GCC_PCIE_1_SLV_Q2A_AXI_CLK				62
+#define GCC_PCIE_2_AUX_CLK					63
+#define GCC_PCIE_2_AUX_CLK_SRC					64
+#define GCC_PCIE_2_CFG_AHB_CLK					65
+#define GCC_PCIE_2_MSTR_AXI_CLK					66
+#define GCC_PCIE_2_PIPE_CLK					67
+#define GCC_PCIE_2_SLV_AXI_CLK					68
+#define GCC_PCIE_2_SLV_Q2A_AXI_CLK				69
+#define GCC_PCIE_MDM_CLKREF_EN					70
+#define GCC_PCIE_PHY_AUX_CLK					71
+#define GCC_PCIE_PHY_REFGEN_CLK_SRC				72
+#define GCC_PCIE_WIFI_CLKREF_EN					73
+#define GCC_PCIE_WIGIG_CLKREF_EN				74
+#define GCC_PDM2_CLK						75
+#define GCC_PDM2_CLK_SRC					76
+#define GCC_PDM_AHB_CLK						77
+#define GCC_PDM_XO4_CLK						78
+#define GCC_PRNG_AHB_CLK					79
+#define GCC_QMIP_CAMERA_NRT_AHB_CLK				80
+#define GCC_QMIP_CAMERA_RT_AHB_CLK				81
+#define GCC_QMIP_DISP_AHB_CLK					82
+#define GCC_QMIP_VIDEO_CVP_AHB_CLK				83
+#define GCC_QMIP_VIDEO_VCODEC_AHB_CLK				84
+#define GCC_QUPV3_WRAP0_CORE_2X_CLK				85
+#define GCC_QUPV3_WRAP0_CORE_CLK				86
+#define GCC_QUPV3_WRAP0_S0_CLK					87
+#define GCC_QUPV3_WRAP0_S0_CLK_SRC				88
+#define GCC_QUPV3_WRAP0_S1_CLK					89
+#define GCC_QUPV3_WRAP0_S1_CLK_SRC				90
+#define GCC_QUPV3_WRAP0_S2_CLK					91
+#define GCC_QUPV3_WRAP0_S2_CLK_SRC				92
+#define GCC_QUPV3_WRAP0_S3_CLK					93
+#define GCC_QUPV3_WRAP0_S3_CLK_SRC				94
+#define GCC_QUPV3_WRAP0_S4_CLK					95
+#define GCC_QUPV3_WRAP0_S4_CLK_SRC				96
+#define GCC_QUPV3_WRAP0_S5_CLK					97
+#define GCC_QUPV3_WRAP0_S5_CLK_SRC				98
+#define GCC_QUPV3_WRAP0_S6_CLK					99
+#define GCC_QUPV3_WRAP0_S6_CLK_SRC				100
+#define GCC_QUPV3_WRAP0_S7_CLK					101
+#define GCC_QUPV3_WRAP0_S7_CLK_SRC				102
+#define GCC_QUPV3_WRAP1_CORE_2X_CLK				103
+#define GCC_QUPV3_WRAP1_CORE_CLK				104
+#define GCC_QUPV3_WRAP1_S0_CLK					105
+#define GCC_QUPV3_WRAP1_S0_CLK_SRC				106
+#define GCC_QUPV3_WRAP1_S1_CLK					107
+#define GCC_QUPV3_WRAP1_S1_CLK_SRC				108
+#define GCC_QUPV3_WRAP1_S2_CLK					109
+#define GCC_QUPV3_WRAP1_S2_CLK_SRC				110
+#define GCC_QUPV3_WRAP1_S3_CLK					111
+#define GCC_QUPV3_WRAP1_S3_CLK_SRC				112
+#define GCC_QUPV3_WRAP1_S4_CLK					113
+#define GCC_QUPV3_WRAP1_S4_CLK_SRC				114
+#define GCC_QUPV3_WRAP1_S5_CLK					115
+#define GCC_QUPV3_WRAP1_S5_CLK_SRC				116
+#define GCC_QUPV3_WRAP2_CORE_2X_CLK				117
+#define GCC_QUPV3_WRAP2_CORE_CLK				118
+#define GCC_QUPV3_WRAP2_S0_CLK					119
+#define GCC_QUPV3_WRAP2_S0_CLK_SRC				120
+#define GCC_QUPV3_WRAP2_S1_CLK					121
+#define GCC_QUPV3_WRAP2_S1_CLK_SRC				122
+#define GCC_QUPV3_WRAP2_S2_CLK					123
+#define GCC_QUPV3_WRAP2_S2_CLK_SRC				124
+#define GCC_QUPV3_WRAP2_S3_CLK					125
+#define GCC_QUPV3_WRAP2_S3_CLK_SRC				126
+#define GCC_QUPV3_WRAP2_S4_CLK					127
+#define GCC_QUPV3_WRAP2_S4_CLK_SRC				128
+#define GCC_QUPV3_WRAP2_S5_CLK					129
+#define GCC_QUPV3_WRAP2_S5_CLK_SRC				130
+#define GCC_QUPV3_WRAP_0_M_AHB_CLK				131
+#define GCC_QUPV3_WRAP_0_S_AHB_CLK				132
+#define GCC_QUPV3_WRAP_1_M_AHB_CLK				133
+#define GCC_QUPV3_WRAP_1_S_AHB_CLK				134
+#define GCC_QUPV3_WRAP_2_M_AHB_CLK				135
+#define GCC_QUPV3_WRAP_2_S_AHB_CLK				136
+#define GCC_SDCC2_AHB_CLK					137
+#define GCC_SDCC2_APPS_CLK					138
+#define GCC_SDCC2_APPS_CLK_SRC					139
+#define GCC_SDCC4_AHB_CLK					140
+#define GCC_SDCC4_APPS_CLK					141
+#define GCC_SDCC4_APPS_CLK_SRC					142
+#define GCC_SYS_NOC_CPUSS_AHB_CLK				143
+#define GCC_TSIF_AHB_CLK					144
+#define GCC_TSIF_INACTIVITY_TIMERS_CLK				145
+#define GCC_TSIF_REF_CLK					146
+#define GCC_TSIF_REF_CLK_SRC					147
+#define GCC_UFS_1X_CLKREF_EN					148
+#define GCC_UFS_CARD_AHB_CLK					149
+#define GCC_UFS_CARD_AXI_CLK					150
+#define GCC_UFS_CARD_AXI_CLK_SRC				151
+#define GCC_UFS_CARD_ICE_CORE_CLK				152
+#define GCC_UFS_CARD_ICE_CORE_CLK_SRC				153
+#define GCC_UFS_CARD_PHY_AUX_CLK				154
+#define GCC_UFS_CARD_PHY_AUX_CLK_SRC				155
+#define GCC_UFS_CARD_RX_SYMBOL_0_CLK				156
+#define GCC_UFS_CARD_RX_SYMBOL_1_CLK				157
+#define GCC_UFS_CARD_TX_SYMBOL_0_CLK				158
+#define GCC_UFS_CARD_UNIPRO_CORE_CLK				159
+#define GCC_UFS_CARD_UNIPRO_CORE_CLK_SRC			160
+#define GCC_UFS_PHY_AHB_CLK					161
+#define GCC_UFS_PHY_AXI_CLK					162
+#define GCC_UFS_PHY_AXI_CLK_SRC					163
+#define GCC_UFS_PHY_ICE_CORE_CLK				164
+#define GCC_UFS_PHY_ICE_CORE_CLK_SRC				165
+#define GCC_UFS_PHY_PHY_AUX_CLK					166
+#define GCC_UFS_PHY_PHY_AUX_CLK_SRC				167
+#define GCC_UFS_PHY_RX_SYMBOL_0_CLK				168
+#define GCC_UFS_PHY_RX_SYMBOL_1_CLK				169
+#define GCC_UFS_PHY_TX_SYMBOL_0_CLK				170
+#define GCC_UFS_PHY_UNIPRO_CORE_CLK				171
+#define GCC_UFS_PHY_UNIPRO_CORE_CLK_SRC				172
+#define GCC_USB30_PRIM_MASTER_CLK				173
+#define GCC_USB30_PRIM_MASTER_CLK_SRC				174
+#define GCC_USB30_PRIM_MOCK_UTMI_CLK				175
+#define GCC_USB30_PRIM_MOCK_UTMI_CLK_SRC			176
+#define GCC_USB30_PRIM_MOCK_UTMI_POSTDIV_CLK_SRC		177
+#define GCC_USB30_PRIM_SLEEP_CLK				178
+#define GCC_USB30_SEC_MASTER_CLK				179
+#define GCC_USB30_SEC_MASTER_CLK_SRC				180
+#define GCC_USB30_SEC_MOCK_UTMI_CLK				181
+#define GCC_USB30_SEC_MOCK_UTMI_CLK_SRC				182
+#define GCC_USB30_SEC_MOCK_UTMI_POSTDIV_CLK_SRC			183
+#define GCC_USB30_SEC_SLEEP_CLK					184
+#define GCC_USB3_PRIM_PHY_AUX_CLK				185
+#define GCC_USB3_PRIM_PHY_AUX_CLK_SRC				186
+#define GCC_USB3_PRIM_PHY_COM_AUX_CLK				187
+#define GCC_USB3_PRIM_PHY_PIPE_CLK				188
+#define GCC_USB3_PRIM_PHY_PIPE_CLK_SRC				189
+#define GCC_USB3_SEC_CLKREF_EN					190
+#define GCC_USB3_SEC_PHY_AUX_CLK				191
+#define GCC_USB3_SEC_PHY_AUX_CLK_SRC				192
+#define GCC_USB3_SEC_PHY_COM_AUX_CLK				193
+#define GCC_USB3_SEC_PHY_PIPE_CLK				194
+#define GCC_USB3_SEC_PHY_PIPE_CLK_SRC				195
+#define GCC_VIDEO_AHB_CLK					196
+#define GCC_VIDEO_AXI0_CLK					197
+#define GCC_VIDEO_AXI1_CLK					198
+#define GCC_VIDEO_XO_CLK					199
+
+/* GCC resets */
+#define GCC_GPU_BCR						0
+#define GCC_MMSS_BCR						1
+#define GCC_NPU_BWMON_BCR					2
+#define GCC_NPU_BCR						3
+#define GCC_PCIE_0_BCR						4
+#define GCC_PCIE_0_LINK_DOWN_BCR				5
+#define GCC_PCIE_0_NOCSR_COM_PHY_BCR				6
+#define GCC_PCIE_0_PHY_BCR					7
+#define GCC_PCIE_0_PHY_NOCSR_COM_PHY_BCR			8
+#define GCC_PCIE_1_BCR						9
+#define GCC_PCIE_1_LINK_DOWN_BCR				10
+#define GCC_PCIE_1_NOCSR_COM_PHY_BCR				11
+#define GCC_PCIE_1_PHY_BCR					12
+#define GCC_PCIE_1_PHY_NOCSR_COM_PHY_BCR			13
+#define GCC_PCIE_2_BCR						14
+#define GCC_PCIE_2_LINK_DOWN_BCR				15
+#define GCC_PCIE_2_NOCSR_COM_PHY_BCR				16
+#define GCC_PCIE_2_PHY_BCR					17
+#define GCC_PCIE_2_PHY_NOCSR_COM_PHY_BCR			18
+#define GCC_PCIE_PHY_BCR					19
+#define GCC_PCIE_PHY_CFG_AHB_BCR				20
+#define GCC_PCIE_PHY_COM_BCR					21
+#define GCC_PDM_BCR						22
+#define GCC_PRNG_BCR						23
+#define GCC_QUPV3_WRAPPER_0_BCR					24
+#define GCC_QUPV3_WRAPPER_1_BCR					25
+#define GCC_QUPV3_WRAPPER_2_BCR					26
+#define GCC_QUSB2PHY_PRIM_BCR					27
+#define GCC_QUSB2PHY_SEC_BCR					28
+#define GCC_SDCC2_BCR						29
+#define GCC_SDCC4_BCR						30
+#define GCC_TSIF_BCR						31
+#define GCC_UFS_CARD_BCR					32
+#define GCC_UFS_PHY_BCR						33
+#define GCC_USB30_PRIM_BCR					34
+#define GCC_USB30_SEC_BCR					35
+#define GCC_USB3_DP_PHY_PRIM_BCR				36
+#define GCC_USB3_DP_PHY_SEC_BCR					37
+#define GCC_USB3_PHY_PRIM_BCR					38
+#define GCC_USB3_PHY_SEC_BCR					39
+#define GCC_USB3PHY_PHY_PRIM_BCR				40
+#define GCC_USB3PHY_PHY_SEC_BCR					41
+#define GCC_USB_PHY_CFG_AHB2PHY_BCR				42
+#define GCC_VIDEO_AXI0_CLK_ARES					43
+#define GCC_VIDEO_AXI1_CLK_ARES					44
+
+/* GCC power domains */
+#define PCIE_0_GDSC						0
+#define PCIE_1_GDSC						1
+#define PCIE_2_GDSC						2
+#define UFS_CARD_GDSC						3
+#define UFS_PHY_GDSC						4
+#define USB30_PRIM_GDSC						5
+#define USB30_SEC_GDSC						6
+#define HLOS1_VOTE_MMNOC_MMU_TBU_HF0_GDSC			7
+#define HLOS1_VOTE_MMNOC_MMU_TBU_HF1_GDSC			8
+#define HLOS1_VOTE_MMNOC_MMU_TBU_SF0_GDSC			9
+#define HLOS1_VOTE_MMNOC_MMU_TBU_SF1_GDSC			10
+
+#endif
diff --git a/include/dt-bindings/clock/qcom,gpucc-sc7180.h b/include/dt-bindings/clock/qcom,gpucc-sc7180.h
index 0e4643b..65e706d 100644
--- a/include/dt-bindings/clock/qcom,gpucc-sc7180.h
+++ b/include/dt-bindings/clock/qcom,gpucc-sc7180.h
@@ -15,7 +15,8 @@
 #define GPU_CC_CXO_CLK			6
 #define GPU_CC_GMU_CLK_SRC		7
 
-/* CAM_CC GDSCRs */
+/* GPU_CC GDSCRs */
 #define CX_GDSC				0
+#define GX_GDSC				1
 
 #endif
diff --git a/include/dt-bindings/clock/qcom,mss-sc7180.h b/include/dt-bindings/clock/qcom,mss-sc7180.h
new file mode 100644
index 0000000..f15a9de
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,mss-sc7180.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_MSS_SC7180_H
+#define _DT_BINDINGS_CLK_QCOM_MSS_SC7180_H
+
+#define MSS_AXI_CRYPTO_CLK	0
+#define MSS_AXI_NAV_CLK		1
+
+#endif
diff --git a/include/dt-bindings/clock/qcom,rpmcc.h b/include/dt-bindings/clock/qcom,rpmcc.h
index 8e30957..ae74c43 100644
--- a/include/dt-bindings/clock/qcom,rpmcc.h
+++ b/include/dt-bindings/clock/qcom,rpmcc.h
@@ -37,6 +37,10 @@
 #define RPM_XO_A0				27
 #define RPM_XO_A1				28
 #define RPM_XO_A2				29
+#define RPM_NSS_FABRIC_0_CLK			30
+#define RPM_NSS_FABRIC_0_A_CLK			31
+#define RPM_NSS_FABRIC_1_CLK			32
+#define RPM_NSS_FABRIC_1_A_CLK			33
 
 /* SMD RPM clocks */
 #define RPM_SMD_XO_CLK_SRC				0
diff --git a/include/dt-bindings/clock/qcom,rpmh.h b/include/dt-bindings/clock/qcom,rpmh.h
index edcab3f..2e6c54e 100644
--- a/include/dt-bindings/clock/qcom,rpmh.h
+++ b/include/dt-bindings/clock/qcom,rpmh.h
@@ -1,5 +1,5 @@
 /* SPDX-License-Identifier: GPL-2.0 */
-/* Copyright (c) 2018, The Linux Foundation. All rights reserved. */
+/* Copyright (c) 2018, 2020, The Linux Foundation. All rights reserved. */
 
 
 #ifndef _DT_BINDINGS_CLK_MSM_RPMH_H
@@ -19,5 +19,7 @@
 #define RPMH_RF_CLK3				10
 #define RPMH_RF_CLK3_A				11
 #define RPMH_IPA_CLK				12
+#define RPMH_LN_BB_CLK1				13
+#define RPMH_LN_BB_CLK1_A			14
 
 #endif
diff --git a/include/dt-bindings/clock/sprd,sc9863a-clk.h b/include/dt-bindings/clock/sprd,sc9863a-clk.h
new file mode 100644
index 0000000..901ba59
--- /dev/null
+++ b/include/dt-bindings/clock/sprd,sc9863a-clk.h
@@ -0,0 +1,334 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Unisoc SC9863A platform clocks
+ *
+ * Copyright (C) 2019, Unisoc Communications Inc.
+ */
+
+#ifndef _DT_BINDINGS_CLK_SC9863A_H_
+#define _DT_BINDINGS_CLK_SC9863A_H_
+
+#define CLK_MPLL0_GATE		0
+#define CLK_DPLL0_GATE		1
+#define CLK_LPLL_GATE		2
+#define CLK_GPLL_GATE		3
+#define CLK_DPLL1_GATE		4
+#define CLK_MPLL1_GATE		5
+#define CLK_MPLL2_GATE		6
+#define CLK_ISPPLL_GATE		7
+#define CLK_PMU_APB_NUM		(CLK_ISPPLL_GATE + 1)
+
+#define CLK_AUDIO_GATE		0
+#define CLK_RPLL		1
+#define CLK_RPLL_390M		2
+#define CLK_RPLL_260M		3
+#define CLK_RPLL_195M		4
+#define CLK_RPLL_26M		5
+#define CLK_ANLG_PHY_G5_NUM	(CLK_RPLL_26M + 1)
+
+#define CLK_TWPLL		0
+#define CLK_TWPLL_768M		1
+#define CLK_TWPLL_384M		2
+#define CLK_TWPLL_192M		3
+#define CLK_TWPLL_96M		4
+#define CLK_TWPLL_48M		5
+#define CLK_TWPLL_24M		6
+#define CLK_TWPLL_12M		7
+#define CLK_TWPLL_512M		8
+#define CLK_TWPLL_256M		9
+#define CLK_TWPLL_128M		10
+#define CLK_TWPLL_64M		11
+#define CLK_TWPLL_307M2		12
+#define CLK_TWPLL_219M4		13
+#define CLK_TWPLL_170M6		14
+#define CLK_TWPLL_153M6		15
+#define CLK_TWPLL_76M8		16
+#define CLK_TWPLL_51M2		17
+#define CLK_TWPLL_38M4		18
+#define CLK_TWPLL_19M2		19
+#define CLK_LPLL		20
+#define CLK_LPLL_409M6		21
+#define CLK_LPLL_245M76		22
+#define CLK_GPLL		23
+#define CLK_ISPPLL		24
+#define CLK_ISPPLL_468M		25
+#define CLK_ANLG_PHY_G1_NUM	(CLK_ISPPLL_468M + 1)
+
+#define CLK_DPLL0		0
+#define CLK_DPLL1		1
+#define CLK_DPLL0_933M		2
+#define CLK_DPLL0_622M3		3
+#define CLK_DPLL0_400M		4
+#define CLK_DPLL0_266M7		5
+#define CLK_DPLL0_123M1		6
+#define CLK_DPLL0_50M		7
+#define CLK_ANLG_PHY_G7_NUM	(CLK_DPLL0_50M + 1)
+
+#define CLK_MPLL0		0
+#define CLK_MPLL1		1
+#define CLK_MPLL2		2
+#define CLK_MPLL2_675M		3
+#define CLK_ANLG_PHY_G4_NUM	(CLK_MPLL2_675M + 1)
+
+#define CLK_AP_APB		0
+#define CLK_AP_CE		1
+#define CLK_NANDC_ECC		2
+#define CLK_NANDC_26M		3
+#define CLK_EMMC_32K		4
+#define CLK_SDIO0_32K		5
+#define CLK_SDIO1_32K		6
+#define CLK_SDIO2_32K		7
+#define CLK_OTG_UTMI		8
+#define CLK_AP_UART0		9
+#define CLK_AP_UART1		10
+#define CLK_AP_UART2		11
+#define CLK_AP_UART3		12
+#define CLK_AP_UART4		13
+#define CLK_AP_I2C0		14
+#define CLK_AP_I2C1		15
+#define CLK_AP_I2C2		16
+#define CLK_AP_I2C3		17
+#define CLK_AP_I2C4		18
+#define CLK_AP_I2C5		19
+#define CLK_AP_I2C6		20
+#define CLK_AP_SPI0		21
+#define CLK_AP_SPI1		22
+#define CLK_AP_SPI2		23
+#define CLK_AP_SPI3		24
+#define CLK_AP_IIS0		25
+#define CLK_AP_IIS1		26
+#define CLK_AP_IIS2		27
+#define CLK_SIM0		28
+#define CLK_SIM0_32K		29
+#define CLK_AP_CLK_NUM		(CLK_SIM0_32K + 1)
+
+#define CLK_13M			0
+#define CLK_6M5			1
+#define CLK_4M3			2
+#define CLK_2M			3
+#define CLK_250K		4
+#define CLK_RCO_25M		5
+#define CLK_RCO_4M		6
+#define CLK_RCO_2M		7
+#define CLK_EMC			8
+#define CLK_AON_APB		9
+#define CLK_ADI			10
+#define CLK_AUX0		11
+#define CLK_AUX1		12
+#define CLK_AUX2		13
+#define CLK_PROBE		14
+#define CLK_PWM0		15
+#define CLK_PWM1		16
+#define CLK_PWM2		17
+#define CLK_AON_THM		18
+#define CLK_AUDIF		19
+#define CLK_CPU_DAP		20
+#define CLK_CPU_TS		21
+#define CLK_DJTAG_TCK		22
+#define CLK_EMC_REF		23
+#define CLK_CSSYS		24
+#define CLK_AON_PMU		25
+#define CLK_PMU_26M		26
+#define CLK_AON_TMR		27
+#define CLK_POWER_CPU		28
+#define CLK_AP_AXI		29
+#define CLK_SDIO0_2X		30
+#define CLK_SDIO1_2X		31
+#define CLK_SDIO2_2X		32
+#define CLK_EMMC_2X		33
+#define CLK_DPU			34
+#define CLK_DPU_DPI		35
+#define CLK_OTG_REF		36
+#define CLK_SDPHY_APB		37
+#define CLK_ALG_IO_APB		38
+#define CLK_GPU_CORE		39
+#define CLK_GPU_SOC		40
+#define CLK_MM_EMC		41
+#define CLK_MM_AHB		42
+#define CLK_BPC			43
+#define CLK_DCAM_IF		44
+#define CLK_ISP			45
+#define CLK_JPG			46
+#define CLK_CPP			47
+#define CLK_SENSOR0		48
+#define CLK_SENSOR1		49
+#define CLK_SENSOR2		50
+#define CLK_MM_VEMC		51
+#define CLK_MM_VAHB		52
+#define CLK_VSP			53
+#define CLK_CORE0		54
+#define CLK_CORE1		55
+#define CLK_CORE2		56
+#define CLK_CORE3		57
+#define CLK_CORE4		58
+#define CLK_CORE5		59
+#define CLK_CORE6		60
+#define CLK_CORE7		61
+#define CLK_SCU			62
+#define CLK_ACE			63
+#define CLK_AXI_PERIPH		64
+#define CLK_AXI_ACP		65
+#define CLK_ATB			66
+#define CLK_DEBUG_APB		67
+#define CLK_GIC			68
+#define CLK_PERIPH		69
+#define CLK_AON_CLK_NUM		(CLK_VSP + 1)
+
+#define CLK_OTG_EB		0
+#define CLK_DMA_EB		1
+#define CLK_CE_EB		2
+#define CLK_NANDC_EB		3
+#define CLK_SDIO0_EB		4
+#define CLK_SDIO1_EB		5
+#define CLK_SDIO2_EB		6
+#define CLK_EMMC_EB		7
+#define CLK_EMMC_32K_EB		8
+#define CLK_SDIO0_32K_EB	9
+#define CLK_SDIO1_32K_EB	10
+#define CLK_SDIO2_32K_EB	11
+#define CLK_NANDC_26M_EB	12
+#define CLK_DMA_EB2		13
+#define CLK_CE_EB2		14
+#define CLK_AP_AHB_GATE_NUM	(CLK_CE_EB2 + 1)
+
+#define CLK_GPIO_EB		0
+#define CLK_PWM0_EB		1
+#define CLK_PWM1_EB		2
+#define CLK_PWM2_EB		3
+#define CLK_PWM3_EB		4
+#define CLK_KPD_EB		5
+#define CLK_AON_SYST_EB		6
+#define CLK_AP_SYST_EB		7
+#define CLK_AON_TMR_EB		8
+#define CLK_EFUSE_EB		9
+#define CLK_EIC_EB		10
+#define CLK_INTC_EB		11
+#define CLK_ADI_EB		12
+#define CLK_AUDIF_EB		13
+#define CLK_AUD_EB		14
+#define CLK_VBC_EB		15
+#define CLK_PIN_EB		16
+#define CLK_AP_WDG_EB		17
+#define CLK_MM_EB		18
+#define CLK_AON_APB_CKG_EB	19
+#define CLK_CA53_TS0_EB		20
+#define CLK_CA53_TS1_EB		21
+#define CLK_CS53_DAP_EB		22
+#define CLK_PMU_EB		23
+#define CLK_THM_EB		24
+#define CLK_AUX0_EB		25
+#define CLK_AUX1_EB		26
+#define CLK_AUX2_EB		27
+#define CLK_PROBE_EB		28
+#define CLK_EMC_REF_EB		29
+#define CLK_CA53_WDG_EB		30
+#define CLK_AP_TMR1_EB		31
+#define CLK_AP_TMR2_EB		32
+#define CLK_DISP_EMC_EB		33
+#define CLK_ZIP_EMC_EB		34
+#define CLK_GSP_EMC_EB		35
+#define CLK_MM_VSP_EB		36
+#define CLK_MDAR_EB		37
+#define CLK_RTC4M0_CAL_EB	38
+#define CLK_RTC4M1_CAL_EB	39
+#define CLK_DJTAG_EB		40
+#define CLK_MBOX_EB		41
+#define CLK_AON_DMA_EB		42
+#define CLK_AON_APB_DEF_EB	43
+#define CLK_CA5_TS0_EB		44
+#define CLK_DBG_EB		45
+#define CLK_DBG_EMC_EB		46
+#define CLK_CROSS_TRIG_EB	47
+#define CLK_SERDES_DPHY_EB	48
+#define CLK_ARCH_RTC_EB		49
+#define CLK_KPD_RTC_EB		50
+#define CLK_AON_SYST_RTC_EB	51
+#define CLK_AP_SYST_RTC_EB	52
+#define CLK_AON_TMR_RTC_EB	53
+#define CLK_AP_TMR0_RTC_EB	54
+#define CLK_EIC_RTC_EB		55
+#define CLK_EIC_RTCDV5_EB	56
+#define CLK_AP_WDG_RTC_EB	57
+#define CLK_CA53_WDG_RTC_EB	58
+#define CLK_THM_RTC_EB		59
+#define CLK_ATHMA_RTC_EB	60
+#define CLK_GTHMA_RTC_EB	61
+#define CLK_ATHMA_RTC_A_EB	62
+#define CLK_GTHMA_RTC_A_EB	63
+#define CLK_AP_TMR1_RTC_EB	64
+#define CLK_AP_TMR2_RTC_EB	65
+#define CLK_DXCO_LC_RTC_EB	66
+#define CLK_BB_CAL_RTC_EB	67
+#define CLK_GNU_EB		68
+#define CLK_DISP_EB		69
+#define CLK_MM_EMC_EB		70
+#define CLK_POWER_CPU_EB	71
+#define CLK_HW_I2C_EB		72
+#define CLK_MM_VSP_EMC_EB	73
+#define CLK_VSP_EB		74
+#define CLK_CSSYS_EB		75
+#define CLK_DMC_EB		76
+#define CLK_ROSC_EB		77
+#define CLK_S_D_CFG_EB		78
+#define CLK_S_D_REF_EB		79
+#define CLK_B_DMA_EB		80
+#define CLK_ANLG_EB		81
+#define CLK_ANLG_APB_EB		82
+#define CLK_BSMTMR_EB		83
+#define CLK_AP_AXI_EB		84
+#define CLK_AP_INTC0_EB		85
+#define CLK_AP_INTC1_EB		86
+#define CLK_AP_INTC2_EB		87
+#define CLK_AP_INTC3_EB		88
+#define CLK_AP_INTC4_EB		89
+#define CLK_AP_INTC5_EB		90
+#define CLK_SCC_EB		91
+#define CLK_DPHY_CFG_EB		92
+#define CLK_DPHY_REF_EB		93
+#define CLK_CPHY_CFG_EB		94
+#define CLK_OTG_REF_EB		95
+#define CLK_SERDES_EB		96
+#define CLK_AON_AP_EMC_EB	97
+#define CLK_AON_APB_GATE_NUM	(CLK_AON_AP_EMC_EB + 1)
+
+#define CLK_MAHB_CKG_EB		0
+#define CLK_MDCAM_EB		1
+#define CLK_MISP_EB		2
+#define CLK_MAHBCSI_EB		3
+#define CLK_MCSI_S_EB		4
+#define CLK_MCSI_T_EB		5
+#define CLK_DCAM_AXI_EB		6
+#define CLK_ISP_AXI_EB		7
+#define CLK_MCSI_EB		8
+#define CLK_MCSI_S_CKG_EB	9
+#define CLK_MCSI_T_CKG_EB	10
+#define CLK_SENSOR0_EB		11
+#define CLK_SENSOR1_EB		12
+#define CLK_SENSOR2_EB		13
+#define CLK_MCPHY_CFG_EB	14
+#define CLK_MM_GATE_NUM		(CLK_MCPHY_CFG_EB + 1)
+
+#define CLK_SIM0_EB		0
+#define CLK_IIS0_EB		1
+#define CLK_IIS1_EB		2
+#define CLK_IIS2_EB		3
+#define CLK_SPI0_EB		4
+#define CLK_SPI1_EB		5
+#define CLK_SPI2_EB		6
+#define CLK_I2C0_EB		7
+#define CLK_I2C1_EB		8
+#define CLK_I2C2_EB		9
+#define CLK_I2C3_EB		10
+#define CLK_I2C4_EB		11
+#define CLK_UART0_EB		12
+#define CLK_UART1_EB		13
+#define CLK_UART2_EB		14
+#define CLK_UART3_EB		15
+#define CLK_UART4_EB		16
+#define CLK_SIM0_32K_EB		17
+#define CLK_SPI3_EB		18
+#define CLK_I2C5_EB		19
+#define CLK_I2C6_EB		20
+#define CLK_AP_APB_GATE_NUM	(CLK_I2C6_EB + 1)
+
+#endif /* _DT_BINDINGS_CLK_SC9863A_H_ */
diff --git a/include/dt-bindings/clock/sun50i-a64-ccu.h b/include/dt-bindings/clock/sun50i-a64-ccu.h
index e512a1c..318eb15 100644
--- a/include/dt-bindings/clock/sun50i-a64-ccu.h
+++ b/include/dt-bindings/clock/sun50i-a64-ccu.h
@@ -131,7 +131,7 @@
 #define CLK_AVS			109
 #define CLK_HDMI		110
 #define CLK_HDMI_DDC		111
-
+#define CLK_MBUS		112
 #define CLK_DSI_DPHY		113
 #define CLK_GPU			114
 
diff --git a/include/dt-bindings/clock/tegra114-car.h b/include/dt-bindings/clock/tegra114-car.h
index bb5c2c9..df59aaf 100644
--- a/include/dt-bindings/clock/tegra114-car.h
+++ b/include/dt-bindings/clock/tegra114-car.h
@@ -228,6 +228,8 @@
 #define TEGRA114_CLK_CLK_M 201
 #define TEGRA114_CLK_CLK_M_DIV2 202
 #define TEGRA114_CLK_CLK_M_DIV4 203
+#define TEGRA114_CLK_OSC_DIV2 202
+#define TEGRA114_CLK_OSC_DIV4 203
 #define TEGRA114_CLK_PLL_REF 204
 #define TEGRA114_CLK_PLL_C 205
 #define TEGRA114_CLK_PLL_C_OUT1 206
@@ -274,7 +276,7 @@
 #define TEGRA114_CLK_CLK_OUT_2 246
 #define TEGRA114_CLK_CLK_OUT_3 247
 #define TEGRA114_CLK_BLINK 248
-/* 249 */
+#define TEGRA114_CLK_OSC 249
 /* 250 */
 /* 251 */
 #define TEGRA114_CLK_XUSB_HOST_SRC 252
diff --git a/include/dt-bindings/clock/tegra124-car-common.h b/include/dt-bindings/clock/tegra124-car-common.h
index 0c4f5be..2a9acd5 100644
--- a/include/dt-bindings/clock/tegra124-car-common.h
+++ b/include/dt-bindings/clock/tegra124-car-common.h
@@ -227,6 +227,8 @@
 #define TEGRA124_CLK_CLK_M 201
 #define TEGRA124_CLK_CLK_M_DIV2 202
 #define TEGRA124_CLK_CLK_M_DIV4 203
+#define TEGRA124_CLK_OSC_DIV2 202
+#define TEGRA124_CLK_OSC_DIV4 203
 #define TEGRA124_CLK_PLL_REF 204
 #define TEGRA124_CLK_PLL_C 205
 #define TEGRA124_CLK_PLL_C_OUT1 206
@@ -273,7 +275,7 @@
 #define TEGRA124_CLK_CLK_OUT_2 246
 #define TEGRA124_CLK_CLK_OUT_3 247
 #define TEGRA124_CLK_BLINK 248
-/* 249 */
+#define TEGRA124_CLK_OSC 249
 /* 250 */
 /* 251 */
 #define TEGRA124_CLK_XUSB_HOST_SRC 252
diff --git a/include/dt-bindings/clock/tegra210-car.h b/include/dt-bindings/clock/tegra210-car.h
index 44f6062..7a8f10b 100644
--- a/include/dt-bindings/clock/tegra210-car.h
+++ b/include/dt-bindings/clock/tegra210-car.h
@@ -262,6 +262,8 @@
 #define TEGRA210_CLK_CLK_M 233
 #define TEGRA210_CLK_CLK_M_DIV2 234
 #define TEGRA210_CLK_CLK_M_DIV4 235
+#define TEGRA210_CLK_OSC_DIV2 234
+#define TEGRA210_CLK_OSC_DIV4 235
 #define TEGRA210_CLK_PLL_REF 236
 #define TEGRA210_CLK_PLL_C 237
 #define TEGRA210_CLK_PLL_C_OUT1 238
@@ -355,7 +357,7 @@
 #define TEGRA210_CLK_PLL_A_OUT_ADSP 323
 #define TEGRA210_CLK_PLL_A_OUT0_OUT_ADSP 324
 /* 325 */
-/* 326 */
+#define TEGRA210_CLK_OSC 326
 /* 327 */
 /* 328 */
 /* 329 */
diff --git a/include/dt-bindings/clock/tegra30-car.h b/include/dt-bindings/clock/tegra30-car.h
index 3c90f15..7b542c1 100644
--- a/include/dt-bindings/clock/tegra30-car.h
+++ b/include/dt-bindings/clock/tegra30-car.h
@@ -196,6 +196,8 @@
 #define TEGRA30_CLK_CLK_M 171
 #define TEGRA30_CLK_CLK_M_DIV2 172
 #define TEGRA30_CLK_CLK_M_DIV4 173
+#define TEGRA30_CLK_OSC_DIV2 172
+#define TEGRA30_CLK_OSC_DIV4 173
 #define TEGRA30_CLK_PLL_REF 174
 #define TEGRA30_CLK_PLL_C 175
 #define TEGRA30_CLK_PLL_C_OUT1 176
@@ -243,7 +245,7 @@
 #define TEGRA30_CLK_HCLK 217
 #define TEGRA30_CLK_PCLK 218
 /* 219 */
-/* 220 */
+#define TEGRA30_CLK_OSC 220
 /* 221 */
 /* 222 */
 /* 223 */
diff --git a/include/dt-bindings/interconnect/qcom,osm-l3.h b/include/dt-bindings/interconnect/qcom,osm-l3.h
new file mode 100644
index 0000000..54858ff
--- /dev/null
+++ b/include/dt-bindings/interconnect/qcom,osm-l3.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2019 The Linux Foundation. All rights reserved.
+ */
+
+#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_OSM_L3_H
+#define __DT_BINDINGS_INTERCONNECT_QCOM_OSM_L3_H
+
+#define MASTER_OSM_L3_APPS	0
+#define SLAVE_OSM_L3		1
+
+#endif
diff --git a/include/dt-bindings/interconnect/qcom,sc7180.h b/include/dt-bindings/interconnect/qcom,sc7180.h
new file mode 100644
index 0000000..f9970f6
--- /dev/null
+++ b/include/dt-bindings/interconnect/qcom,sc7180.h
@@ -0,0 +1,161 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Qualcomm SC7180 interconnect IDs
+ *
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_SC7180_H
+#define __DT_BINDINGS_INTERCONNECT_QCOM_SC7180_H
+
+#define MASTER_A1NOC_CFG			0
+#define MASTER_QSPI			1
+#define MASTER_QUP_0			2
+#define MASTER_SDCC_2			3
+#define MASTER_EMMC			4
+#define MASTER_UFS_MEM			5
+#define SLAVE_A1NOC_SNOC			6
+#define SLAVE_SERVICE_A1NOC			7
+
+#define MASTER_A2NOC_CFG			0
+#define MASTER_QDSS_BAM			1
+#define MASTER_QUP_1			2
+#define MASTER_USB3			3
+#define MASTER_CRYPTO			4
+#define MASTER_IPA			5
+#define MASTER_QDSS_ETR			6
+#define SLAVE_A2NOC_SNOC			7
+#define SLAVE_SERVICE_A2NOC			8
+
+#define MASTER_CAMNOC_HF0_UNCOMP			0
+#define MASTER_CAMNOC_HF1_UNCOMP			1
+#define MASTER_CAMNOC_SF_UNCOMP			2
+#define SLAVE_CAMNOC_UNCOMP			3
+
+#define MASTER_NPU			0
+#define MASTER_NPU_PROC			1
+#define SLAVE_CDSP_GEM_NOC			2
+
+#define MASTER_SNOC_CNOC			0
+#define MASTER_QDSS_DAP			1
+#define SLAVE_A1NOC_CFG			2
+#define SLAVE_A2NOC_CFG			3
+#define SLAVE_AHB2PHY_SOUTH			4
+#define SLAVE_AHB2PHY_CENTER			5
+#define SLAVE_AOP			6
+#define SLAVE_AOSS			7
+#define SLAVE_BOOT_ROM			8
+#define SLAVE_CAMERA_CFG				9
+#define SLAVE_CAMERA_NRT_THROTTLE_CFG			10
+#define SLAVE_CAMERA_RT_THROTTLE_CFG			11
+#define SLAVE_CLK_CTL			12
+#define SLAVE_RBCPR_CX_CFG			13
+#define SLAVE_RBCPR_MX_CFG			14
+#define SLAVE_CRYPTO_0_CFG			15
+#define SLAVE_DCC_CFG			16
+#define SLAVE_CNOC_DDRSS			17
+#define SLAVE_DISPLAY_CFG			18
+#define SLAVE_DISPLAY_RT_THROTTLE_CFG			19
+#define SLAVE_DISPLAY_THROTTLE_CFG			20
+#define SLAVE_EMMC_CFG			21
+#define SLAVE_GLM					22
+#define SLAVE_GFX3D_CFG			23
+#define SLAVE_IMEM_CFG			24
+#define SLAVE_IPA_CFG			25
+#define SLAVE_CNOC_MNOC_CFG			26
+#define SLAVE_CNOC_MSS			27
+#define SLAVE_NPU_CFG			28
+#define SLAVE_NPU_DMA_BWMON_CFG			29
+#define SLAVE_NPU_PROC_BWMON_CFG			30
+#define SLAVE_PDM			31
+#define SLAVE_PIMEM_CFG			32
+#define SLAVE_PRNG			33
+#define SLAVE_QDSS_CFG			34
+#define SLAVE_QM_CFG			35
+#define SLAVE_QM_MPU_CFG			36
+#define SLAVE_QSPI_0			37
+#define SLAVE_QUP_0			38
+#define SLAVE_QUP_1			39
+#define SLAVE_SDCC_2			40
+#define SLAVE_SECURITY			41
+#define SLAVE_SNOC_CFG			42
+#define SLAVE_TCSR			43
+#define SLAVE_TLMM_WEST			44
+#define SLAVE_TLMM_NORTH			45
+#define SLAVE_TLMM_SOUTH			46
+#define SLAVE_UFS_MEM_CFG			47
+#define SLAVE_USB3			48
+#define SLAVE_VENUS_CFG			49
+#define SLAVE_VENUS_THROTTLE_CFG			50
+#define SLAVE_VSENSE_CTRL_CFG			51
+#define SLAVE_SERVICE_CNOC			52
+
+#define MASTER_CNOC_DC_NOC			0
+#define SLAVE_GEM_NOC_CFG			1
+#define SLAVE_LLCC_CFG			2
+
+#define MASTER_APPSS_PROC		0
+#define MASTER_SYS_TCU			1
+#define MASTER_GEM_NOC_CFG			2
+#define MASTER_COMPUTE_NOC			3
+#define MASTER_MNOC_HF_MEM_NOC			4
+#define MASTER_MNOC_SF_MEM_NOC			5
+#define MASTER_SNOC_GC_MEM_NOC			6
+#define MASTER_SNOC_SF_MEM_NOC			7
+#define MASTER_GFX3D			8
+#define SLAVE_MSS_PROC_MS_MPU_CFG			9
+#define SLAVE_GEM_NOC_SNOC			10
+#define SLAVE_LLCC			11
+#define SLAVE_SERVICE_GEM_NOC			12
+
+#define MASTER_IPA_CORE			0
+#define SLAVE_IPA_CORE			1
+
+#define MASTER_LLCC			0
+#define SLAVE_EBI1			1
+
+#define MASTER_CNOC_MNOC_CFG			0
+#define MASTER_CAMNOC_HF0			1
+#define MASTER_CAMNOC_HF1			2
+#define MASTER_CAMNOC_SF			3
+#define MASTER_MDP0			4
+#define MASTER_ROTATOR			5
+#define MASTER_VIDEO_P0			6
+#define MASTER_VIDEO_PROC			7
+#define SLAVE_MNOC_HF_MEM_NOC			8
+#define SLAVE_MNOC_SF_MEM_NOC			9
+#define SLAVE_SERVICE_MNOC			10
+
+#define MASTER_NPU_SYS			0
+#define MASTER_NPU_NOC_CFG			1
+#define SLAVE_NPU_CAL_DP0			2
+#define SLAVE_NPU_CP			3
+#define SLAVE_NPU_INT_DMA_BWMON_CFG			4
+#define SLAVE_NPU_DPM			5
+#define SLAVE_ISENSE_CFG			6
+#define SLAVE_NPU_LLM_CFG			7
+#define SLAVE_NPU_TCM			8
+#define SLAVE_NPU_COMPUTE_NOC			9
+#define SLAVE_SERVICE_NPU_NOC			10
+
+#define MASTER_QUP_CORE_0			0
+#define MASTER_QUP_CORE_1			1
+#define SLAVE_QUP_CORE_0			2
+#define SLAVE_QUP_CORE_1			3
+
+#define MASTER_SNOC_CFG			0
+#define MASTER_A1NOC_SNOC			1
+#define MASTER_A2NOC_SNOC			2
+#define MASTER_GEM_NOC_SNOC			3
+#define MASTER_PIMEM			4
+#define SLAVE_APPSS			5
+#define SLAVE_SNOC_CNOC			6
+#define SLAVE_SNOC_GEM_NOC_GC			7
+#define SLAVE_SNOC_GEM_NOC_SF			8
+#define SLAVE_IMEM			9
+#define SLAVE_PIMEM			10
+#define SLAVE_SERVICE_SNOC			11
+#define SLAVE_QDSS_STM			12
+#define SLAVE_TCU			13
+
+#endif
diff --git a/include/dt-bindings/interconnect/qcom,sdm845.h b/include/dt-bindings/interconnect/qcom,sdm845.h
index 7b2393b..290be38 100644
--- a/include/dt-bindings/interconnect/qcom,sdm845.h
+++ b/include/dt-bindings/interconnect/qcom,sdm845.h
@@ -10,134 +10,139 @@
 #define __DT_BINDINGS_INTERCONNECT_QCOM_SDM845_H
 
 #define MASTER_A1NOC_CFG		0
-#define MASTER_BLSP_1			1
-#define MASTER_TSIF			2
-#define MASTER_SDCC_2			3
-#define MASTER_SDCC_4			4
-#define MASTER_UFS_CARD			5
-#define MASTER_UFS_MEM			6
-#define MASTER_PCIE_0			7
-#define MASTER_A2NOC_CFG		8
-#define MASTER_QDSS_BAM			9
-#define MASTER_BLSP_2			10
-#define MASTER_CNOC_A2NOC		11
-#define MASTER_CRYPTO			12
-#define MASTER_IPA			13
-#define MASTER_PCIE_1			14
-#define MASTER_QDSS_ETR			15
-#define MASTER_USB3_0			16
-#define MASTER_USB3_1			17
-#define MASTER_CAMNOC_HF0_UNCOMP	18
-#define MASTER_CAMNOC_HF1_UNCOMP	19
-#define MASTER_CAMNOC_SF_UNCOMP		20
-#define MASTER_SPDM			21
-#define MASTER_TIC			22
-#define MASTER_SNOC_CNOC		23
-#define MASTER_QDSS_DAP			24
-#define MASTER_CNOC_DC_NOC		25
-#define MASTER_APPSS_PROC		26
-#define MASTER_GNOC_CFG			27
-#define MASTER_LLCC			28
-#define MASTER_TCU_0			29
-#define MASTER_MEM_NOC_CFG		30
-#define MASTER_GNOC_MEM_NOC		31
-#define MASTER_MNOC_HF_MEM_NOC		32
-#define MASTER_MNOC_SF_MEM_NOC		33
-#define MASTER_SNOC_GC_MEM_NOC		34
-#define MASTER_SNOC_SF_MEM_NOC		35
-#define MASTER_GFX3D			36
-#define MASTER_CNOC_MNOC_CFG		37
-#define MASTER_CAMNOC_HF0		38
-#define MASTER_CAMNOC_HF1		39
-#define MASTER_CAMNOC_SF		40
-#define MASTER_MDP0			41
-#define MASTER_MDP1			42
-#define MASTER_ROTATOR			43
-#define MASTER_VIDEO_P0			44
-#define MASTER_VIDEO_P1			45
-#define MASTER_VIDEO_PROC		46
-#define MASTER_SNOC_CFG			47
-#define MASTER_A1NOC_SNOC		48
-#define MASTER_A2NOC_SNOC		49
-#define MASTER_GNOC_SNOC		50
-#define MASTER_MEM_NOC_SNOC		51
-#define MASTER_ANOC_PCIE_SNOC		52
-#define MASTER_PIMEM			53
-#define MASTER_GIC			54
-#define SLAVE_A1NOC_SNOC		55
-#define SLAVE_SERVICE_A1NOC		56
-#define SLAVE_ANOC_PCIE_A1NOC_SNOC	57
-#define SLAVE_A2NOC_SNOC		58
-#define SLAVE_ANOC_PCIE_SNOC		59
-#define SLAVE_SERVICE_A2NOC		60
-#define SLAVE_CAMNOC_UNCOMP		61
-#define SLAVE_A1NOC_CFG			62
-#define SLAVE_A2NOC_CFG			63
-#define SLAVE_AOP			64
-#define SLAVE_AOSS			65
-#define SLAVE_CAMERA_CFG		66
-#define SLAVE_CLK_CTL			67
-#define SLAVE_CDSP_CFG			68
-#define SLAVE_RBCPR_CX_CFG		69
-#define SLAVE_CRYPTO_0_CFG		70
-#define SLAVE_DCC_CFG			71
-#define SLAVE_CNOC_DDRSS		72
-#define SLAVE_DISPLAY_CFG		73
-#define SLAVE_GLM			74
-#define SLAVE_GFX3D_CFG			75
-#define SLAVE_IMEM_CFG			76
-#define SLAVE_IPA_CFG			77
-#define SLAVE_CNOC_MNOC_CFG		78
-#define SLAVE_PCIE_0_CFG		79
-#define SLAVE_PCIE_1_CFG		80
-#define SLAVE_PDM			81
-#define SLAVE_SOUTH_PHY_CFG		82
-#define SLAVE_PIMEM_CFG			83
-#define SLAVE_PRNG			84
-#define SLAVE_QDSS_CFG			85
-#define SLAVE_BLSP_2			86
-#define SLAVE_BLSP_1			87
-#define SLAVE_SDCC_2			88
-#define SLAVE_SDCC_4			89
-#define SLAVE_SNOC_CFG			90
-#define SLAVE_SPDM_WRAPPER		91
-#define SLAVE_SPSS_CFG			92
-#define SLAVE_TCSR			93
-#define SLAVE_TLMM_NORTH		94
-#define SLAVE_TLMM_SOUTH		95
-#define SLAVE_TSIF			96
-#define SLAVE_UFS_CARD_CFG		97
-#define SLAVE_UFS_MEM_CFG		98
-#define SLAVE_USB3_0			99
-#define SLAVE_USB3_1			100
-#define SLAVE_VENUS_CFG			101
-#define SLAVE_VSENSE_CTRL_CFG		102
-#define SLAVE_CNOC_A2NOC		103
-#define SLAVE_SERVICE_CNOC		104
-#define SLAVE_LLCC_CFG			105
-#define SLAVE_MEM_NOC_CFG		106
-#define SLAVE_GNOC_SNOC			107
-#define SLAVE_GNOC_MEM_NOC		108
-#define SLAVE_SERVICE_GNOC		109
-#define SLAVE_EBI1			110
-#define SLAVE_MSS_PROC_MS_MPU_CFG	111
-#define SLAVE_MEM_NOC_GNOC		112
-#define SLAVE_LLCC			113
-#define SLAVE_MEM_NOC_SNOC		114
-#define SLAVE_SERVICE_MEM_NOC		115
-#define SLAVE_MNOC_SF_MEM_NOC		116
-#define SLAVE_MNOC_HF_MEM_NOC		117
-#define SLAVE_SERVICE_MNOC		118
-#define SLAVE_APPSS			119
-#define SLAVE_SNOC_CNOC			120
-#define SLAVE_SNOC_MEM_NOC_GC		121
-#define SLAVE_SNOC_MEM_NOC_SF		122
-#define SLAVE_IMEM			123
-#define SLAVE_PCIE_0			124
-#define SLAVE_PCIE_1			125
-#define SLAVE_PIMEM			126
-#define SLAVE_SERVICE_SNOC		127
-#define SLAVE_QDSS_STM			128
-#define SLAVE_TCU			129
+#define MASTER_TSIF			1
+#define MASTER_SDCC_2			2
+#define MASTER_SDCC_4			3
+#define MASTER_UFS_CARD			4
+#define MASTER_UFS_MEM			5
+#define MASTER_PCIE_0			6
+#define SLAVE_A1NOC_SNOC		7
+#define SLAVE_SERVICE_A1NOC		8
+#define SLAVE_ANOC_PCIE_A1NOC_SNOC	9
+
+#define MASTER_A2NOC_CFG		0
+#define MASTER_QDSS_BAM			1
+#define MASTER_CNOC_A2NOC		2
+#define MASTER_CRYPTO			3
+#define MASTER_IPA			4
+#define MASTER_PCIE_1			5
+#define MASTER_QDSS_ETR			6
+#define MASTER_USB3_0			7
+#define MASTER_USB3_1			8
+#define SLAVE_A2NOC_SNOC		9
+#define SLAVE_ANOC_PCIE_SNOC		10
+#define SLAVE_SERVICE_A2NOC		11
+
+#define MASTER_SPDM			0
+#define MASTER_TIC			1
+#define MASTER_SNOC_CNOC		2
+#define MASTER_QDSS_DAP			3
+#define SLAVE_A1NOC_CFG			4
+#define SLAVE_A2NOC_CFG			5
+#define SLAVE_AOP			6
+#define SLAVE_AOSS			7
+#define SLAVE_CAMERA_CFG		8
+#define SLAVE_CLK_CTL			9
+#define SLAVE_CDSP_CFG			10
+#define SLAVE_RBCPR_CX_CFG		11
+#define SLAVE_CRYPTO_0_CFG		12
+#define SLAVE_DCC_CFG			13
+#define SLAVE_CNOC_DDRSS		14
+#define SLAVE_DISPLAY_CFG		15
+#define SLAVE_GLM			16
+#define SLAVE_GFX3D_CFG			17
+#define SLAVE_IMEM_CFG			18
+#define SLAVE_IPA_CFG			19
+#define SLAVE_CNOC_MNOC_CFG		20
+#define SLAVE_PCIE_0_CFG		21
+#define SLAVE_PCIE_1_CFG		22
+#define SLAVE_PDM			23
+#define SLAVE_SOUTH_PHY_CFG		24
+#define SLAVE_PIMEM_CFG			25
+#define SLAVE_PRNG			26
+#define SLAVE_QDSS_CFG			27
+#define SLAVE_BLSP_2			28
+#define SLAVE_BLSP_1			29
+#define SLAVE_SDCC_2			30
+#define SLAVE_SDCC_4			31
+#define SLAVE_SNOC_CFG			32
+#define SLAVE_SPDM_WRAPPER		33
+#define SLAVE_SPSS_CFG			34
+#define SLAVE_TCSR			35
+#define SLAVE_TLMM_NORTH		36
+#define SLAVE_TLMM_SOUTH		37
+#define SLAVE_TSIF			38
+#define SLAVE_UFS_CARD_CFG		39
+#define SLAVE_UFS_MEM_CFG		40
+#define SLAVE_USB3_0			41
+#define SLAVE_USB3_1			42
+#define SLAVE_VENUS_CFG			43
+#define SLAVE_VSENSE_CTRL_CFG		44
+#define SLAVE_CNOC_A2NOC		45
+#define SLAVE_SERVICE_CNOC		46
+
+#define MASTER_CNOC_DC_NOC		0
+#define SLAVE_LLCC_CFG			1
+#define SLAVE_MEM_NOC_CFG		2
+
+#define MASTER_APPSS_PROC		0
+#define MASTER_GNOC_CFG			1
+#define SLAVE_GNOC_SNOC			2
+#define SLAVE_GNOC_MEM_NOC		3
+#define SLAVE_SERVICE_GNOC		4
+
+#define MASTER_TCU_0			0
+#define MASTER_MEM_NOC_CFG		1
+#define MASTER_GNOC_MEM_NOC		2
+#define MASTER_MNOC_HF_MEM_NOC		3
+#define MASTER_MNOC_SF_MEM_NOC		4
+#define MASTER_SNOC_GC_MEM_NOC		5
+#define MASTER_SNOC_SF_MEM_NOC		6
+#define MASTER_GFX3D			7
+#define SLAVE_MSS_PROC_MS_MPU_CFG	8
+#define SLAVE_MEM_NOC_GNOC		9
+#define SLAVE_LLCC			10
+#define SLAVE_MEM_NOC_SNOC		11
+#define SLAVE_SERVICE_MEM_NOC		12
+#define MASTER_LLCC			13
+#define SLAVE_EBI1			14
+
+#define MASTER_CNOC_MNOC_CFG		0
+#define MASTER_CAMNOC_HF0		1
+#define MASTER_CAMNOC_HF1		2
+#define MASTER_CAMNOC_SF		3
+#define MASTER_MDP0			4
+#define MASTER_MDP1			5
+#define MASTER_ROTATOR			6
+#define MASTER_VIDEO_P0			7
+#define MASTER_VIDEO_P1			8
+#define MASTER_VIDEO_PROC		9
+#define SLAVE_MNOC_SF_MEM_NOC		10
+#define SLAVE_MNOC_HF_MEM_NOC		11
+#define SLAVE_SERVICE_MNOC		12
+#define MASTER_CAMNOC_HF0_UNCOMP	13
+#define MASTER_CAMNOC_HF1_UNCOMP	14
+#define MASTER_CAMNOC_SF_UNCOMP		15
+#define SLAVE_CAMNOC_UNCOMP		16
+
+#define MASTER_SNOC_CFG			0
+#define MASTER_A1NOC_SNOC		1
+#define MASTER_A2NOC_SNOC		2
+#define MASTER_GNOC_SNOC		3
+#define MASTER_MEM_NOC_SNOC		4
+#define MASTER_ANOC_PCIE_SNOC		5
+#define MASTER_PIMEM			6
+#define MASTER_GIC			7
+#define SLAVE_APPSS			8
+#define SLAVE_SNOC_CNOC			9
+#define SLAVE_SNOC_MEM_NOC_GC		10
+#define SLAVE_SNOC_MEM_NOC_SF		11
+#define SLAVE_IMEM			12
+#define SLAVE_PCIE_0			13
+#define SLAVE_PCIE_1			14
+#define SLAVE_PIMEM			15
+#define SLAVE_SERVICE_SNOC		16
+#define SLAVE_QDSS_STM			17
+#define SLAVE_TCU			18
 
 #endif
diff --git a/include/dt-bindings/leds/common.h b/include/dt-bindings/leds/common.h
index 9e1256a..0ce7dfc 100644
--- a/include/dt-bindings/leds/common.h
+++ b/include/dt-bindings/leds/common.h
@@ -6,6 +6,7 @@
  * Author: Jacek Anaszewski <j.anaszewski@samsung.com>
  *
  * Copyright (C) 2019 Jacek Anaszewski <jacek.anaszewski@gmail.com>
+ * Copyright (C) 2020 Pavel Machek <pavel@ucw.cz>
  */
 
 #ifndef __DT_BINDINGS_LEDS_H
@@ -32,16 +33,38 @@
 #define LED_COLOR_ID_MAX	8
 
 /* Standard LED functions */
+/* Keyboard LEDs, usually it would be input4::capslock etc. */
+/*   Obsolete equivalent: "shift-key-light" */
+#define LED_FUNCTION_CAPSLOCK "capslock"
+#define LED_FUNCTION_SCROLLLOCK "scrolllock"
+#define LED_FUNCTION_NUMLOCK "numlock"
+/*   Obsolete equivalents: "tpacpi::thinklight" (IBM/Lenovo Thinkpads),
+     "lp5523:kb{1,2,3,4,5,6}" (Nokia N900) */
+#define LED_FUNCTION_KBD_BACKLIGHT "kbd_backlight"
+
+/* System LEDs, usually found on system body.
+   platform::mute (etc) is sometimes seen, :mute would be better */
+#define LED_FUNCTION_POWER "power"
+#define LED_FUNCTION_DISK "disk"
+
+/*   Obsolete: "platform:*:charging" (allwinner sun50i) */
+#define LED_FUNCTION_CHARGING "charging"
+/*   Used RGB notification LEDs common on phones.
+     Obsolete equivalents: "status-led:{red,green,blue}" (Motorola Droid 4),
+     "lp5523:{r,g,b}" (Nokia N900) */
+#define LED_FUNCTION_STATUS "status"
+
+#define LED_FUNCTION_MICMUTE "micmute"
+#define LED_FUNCTION_MUTE "mute"
+
+/* Miscelleaus functions. Use functions above if you can. */
 #define LED_FUNCTION_ACTIVITY "activity"
 #define LED_FUNCTION_ALARM "alarm"
 #define LED_FUNCTION_BACKLIGHT "backlight"
 #define LED_FUNCTION_BLUETOOTH "bluetooth"
 #define LED_FUNCTION_BOOT "boot"
 #define LED_FUNCTION_CPU "cpu"
-#define LED_FUNCTION_CAPSLOCK "capslock"
-#define LED_FUNCTION_CHARGING "charging"
 #define LED_FUNCTION_DEBUG "debug"
-#define LED_FUNCTION_DISK "disk"
 #define LED_FUNCTION_DISK_ACTIVITY "disk-activity"
 #define LED_FUNCTION_DISK_ERR "disk-err"
 #define LED_FUNCTION_DISK_READ "disk-read"
@@ -50,21 +73,14 @@
 #define LED_FUNCTION_FLASH "flash"
 #define LED_FUNCTION_HEARTBEAT "heartbeat"
 #define LED_FUNCTION_INDICATOR "indicator"
-#define LED_FUNCTION_KBD_BACKLIGHT "kbd_backlight"
 #define LED_FUNCTION_LAN "lan"
 #define LED_FUNCTION_MAIL "mail"
 #define LED_FUNCTION_MTD "mtd"
-#define LED_FUNCTION_MICMUTE "micmute"
-#define LED_FUNCTION_MUTE "mute"
-#define LED_FUNCTION_NUMLOCK "numlock"
 #define LED_FUNCTION_PANIC "panic"
 #define LED_FUNCTION_PROGRAMMING "programming"
-#define LED_FUNCTION_POWER "power"
 #define LED_FUNCTION_RX "rx"
 #define LED_FUNCTION_SD "sd"
-#define LED_FUNCTION_SCROLLLOCK "scrolllock"
 #define LED_FUNCTION_STANDBY "standby"
-#define LED_FUNCTION_STATUS "status"
 #define LED_FUNCTION_TORCH "torch"
 #define LED_FUNCTION_TX "tx"
 #define LED_FUNCTION_USB "usb"
diff --git a/include/dt-bindings/power/meson-a1-power.h b/include/dt-bindings/power/meson-a1-power.h
new file mode 100644
index 0000000..6cf50bf
--- /dev/null
+++ b/include/dt-bindings/power/meson-a1-power.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */
+/*
+ * Copyright (c) 2019 Amlogic, Inc.
+ * Author: Jianxin Pan <jianxin.pan@amlogic.com>
+ */
+
+#ifndef _DT_BINDINGS_MESON_A1_POWER_H
+#define _DT_BINDINGS_MESON_A1_POWER_H
+
+#define PWRC_DSPA_ID	8
+#define PWRC_DSPB_ID	9
+#define PWRC_UART_ID	10
+#define PWRC_DMC_ID	11
+#define PWRC_I2C_ID	12
+#define PWRC_PSRAM_ID	13
+#define PWRC_ACODEC_ID	14
+#define PWRC_AUDIO_ID	15
+#define PWRC_OTP_ID	16
+#define PWRC_DMA_ID	17
+#define PWRC_SD_EMMC_ID	18
+#define PWRC_RAMA_ID	19
+#define PWRC_RAMB_ID	20
+#define PWRC_IR_ID	21
+#define PWRC_SPICC_ID	22
+#define PWRC_SPIFC_ID	23
+#define PWRC_USB_ID	24
+#define PWRC_NIC_ID	25
+#define PWRC_PDMIN_ID	26
+#define PWRC_RSA_ID	27
+#define PWRC_MAX_ID	28
+
+#endif
diff --git a/include/dt-bindings/soc/tegra-pmc.h b/include/dt-bindings/soc/tegra-pmc.h
new file mode 100644
index 0000000..a99a457
--- /dev/null
+++ b/include/dt-bindings/soc/tegra-pmc.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2019-2020, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_SOC_TEGRA_PMC_H
+#define _DT_BINDINGS_SOC_TEGRA_PMC_H
+
+#define TEGRA_PMC_CLK_OUT_1		0
+#define TEGRA_PMC_CLK_OUT_2		1
+#define TEGRA_PMC_CLK_OUT_3		2
+#define TEGRA_PMC_CLK_BLINK		3
+
+#define TEGRA_PMC_CLK_MAX		4
+
+#endif	/* _DT_BINDINGS_SOC_TEGRA_PMC_H */
diff --git a/include/dt-bindings/sound/meson-aiu.h b/include/dt-bindings/sound/meson-aiu.h
new file mode 100644
index 0000000..1051b8a
--- /dev/null
+++ b/include/dt-bindings/sound/meson-aiu.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __DT_MESON_AIU_H
+#define __DT_MESON_AIU_H
+
+#define AIU_CPU			0
+#define AIU_HDMI		1
+#define AIU_ACODEC		2
+
+#define CPU_I2S_FIFO		0
+#define CPU_SPDIF_FIFO		1
+#define CPU_I2S_ENCODER		2
+#define CPU_SPDIF_ENCODER	3
+
+#define CTRL_I2S		0
+#define CTRL_PCM		1
+#define CTRL_OUT		2
+
+#endif /* __DT_MESON_AIU_H */
diff --git a/include/dt-bindings/sound/meson-g12a-toacodec.h b/include/dt-bindings/sound/meson-g12a-toacodec.h
new file mode 100644
index 0000000..69d7a75
--- /dev/null
+++ b/include/dt-bindings/sound/meson-g12a-toacodec.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __DT_MESON_G12A_TOACODEC_H
+#define __DT_MESON_G12A_TOACODEC_H
+
+#define TOACODEC_IN_A	0
+#define TOACODEC_IN_B	1
+#define TOACODEC_IN_C	2
+#define TOACODEC_OUT	3
+
+#endif /* __DT_MESON_G12A_TOACODEC_H */
diff --git a/include/keys/big_key-type.h b/include/keys/big_key-type.h
index f6a7ba4..3fee04f 100644
--- a/include/keys/big_key-type.h
+++ b/include/keys/big_key-type.h
@@ -17,6 +17,6 @@ extern void big_key_free_preparse(struct key_preparsed_payload *prep);
 extern void big_key_revoke(struct key *key);
 extern void big_key_destroy(struct key *key);
 extern void big_key_describe(const struct key *big_key, struct seq_file *m);
-extern long big_key_read(const struct key *key, char __user *buffer, size_t buflen);
+extern long big_key_read(const struct key *key, char *buffer, size_t buflen);
 
 #endif /* _KEYS_BIG_KEY_TYPE_H */
diff --git a/include/keys/user-type.h b/include/keys/user-type.h
index d5e7326..be61fcd 100644
--- a/include/keys/user-type.h
+++ b/include/keys/user-type.h
@@ -41,8 +41,7 @@ extern int user_update(struct key *key, struct key_preparsed_payload *prep);
 extern void user_revoke(struct key *key);
 extern void user_destroy(struct key *key);
 extern void user_describe(const struct key *user, struct seq_file *m);
-extern long user_read(const struct key *key,
-		      char __user *buffer, size_t buflen);
+extern long user_read(const struct key *key, char *buffer, size_t buflen);
 
 static inline const struct user_key_payload *user_key_payload_rcu(const struct key *key)
 {
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 0f24d70..d661cd0 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -416,9 +416,30 @@ extern void acpi_osi_setup(char *str);
 extern bool acpi_osi_is_win8(void);
 
 #ifdef CONFIG_ACPI_NUMA
-int acpi_map_pxm_to_online_node(int pxm);
 int acpi_map_pxm_to_node(int pxm);
 int acpi_get_node(acpi_handle handle);
+
+/**
+ * acpi_map_pxm_to_online_node - Map proximity ID to online node
+ * @pxm: ACPI proximity ID
+ *
+ * This is similar to acpi_map_pxm_to_node(), but always returns an online
+ * node.  When the mapped node from a given proximity ID is offline, it
+ * looks up the node distance table and returns the nearest online node.
+ *
+ * ACPI device drivers, which are called after the NUMA initialization has
+ * completed in the kernel, can call this interface to obtain their device
+ * NUMA topology from ACPI tables.  Such drivers do not have to deal with
+ * offline nodes.  A node may be offline when a device proximity ID is
+ * unique, SRAT memory entry does not exist, or NUMA is disabled, ex.
+ * "numa=off" on x86.
+ */
+static inline int acpi_map_pxm_to_online_node(int pxm)
+{
+	int node = acpi_map_pxm_to_node(pxm);
+
+	return numa_map_to_online_node(node);
+}
 #else
 static inline int acpi_map_pxm_to_online_node(int pxm)
 {
@@ -488,6 +509,11 @@ void __init acpi_nvs_nosave_s3(void);
 void __init acpi_sleep_no_blacklist(void);
 #endif /* CONFIG_PM_SLEEP */
 
+int acpi_register_wakeup_handler(
+	int wake_irq, bool (*wakeup)(void *context), void *context);
+void acpi_unregister_wakeup_handler(
+	bool (*wakeup)(void *context), void *context);
+
 struct acpi_osc_context {
 	char *uuid_str;			/* UUID string */
 	int rev;
@@ -530,8 +556,9 @@ extern bool osc_pc_lpi_support_confirmed;
 #define OSC_PCI_CLOCK_PM_SUPPORT		0x00000004
 #define OSC_PCI_SEGMENT_GROUPS_SUPPORT		0x00000008
 #define OSC_PCI_MSI_SUPPORT			0x00000010
+#define OSC_PCI_EDR_SUPPORT			0x00000080
 #define OSC_PCI_HPX_TYPE_3_SUPPORT		0x00000100
-#define OSC_PCI_SUPPORT_MASKS			0x0000011f
+#define OSC_PCI_SUPPORT_MASKS			0x0000019f
 
 /* PCI Host Bridge _OSC: Capabilities DWORD 3: Control Field */
 #define OSC_PCI_EXPRESS_NATIVE_HP_CONTROL	0x00000001
@@ -540,7 +567,8 @@ extern bool osc_pc_lpi_support_confirmed;
 #define OSC_PCI_EXPRESS_AER_CONTROL		0x00000008
 #define OSC_PCI_EXPRESS_CAPABILITY_CONTROL	0x00000010
 #define OSC_PCI_EXPRESS_LTR_CONTROL		0x00000020
-#define OSC_PCI_CONTROL_MASKS			0x0000003f
+#define OSC_PCI_EXPRESS_DPC_CONTROL		0x00000080
+#define OSC_PCI_CONTROL_MASKS			0x000000bf
 
 #define ACPI_GSB_ACCESS_ATTRIB_QUICK		0x00000002
 #define ACPI_GSB_ACCESS_ATTRIB_SEND_RCV         0x00000004
diff --git a/include/linux/aer.h b/include/linux/aer.h
index fa19e01..97f64ba 100644
--- a/include/linux/aer.h
+++ b/include/linux/aer.h
@@ -44,8 +44,7 @@ struct aer_capability_regs {
 /* PCIe port driver needs this function to enable AER */
 int pci_enable_pcie_error_reporting(struct pci_dev *dev);
 int pci_disable_pcie_error_reporting(struct pci_dev *dev);
-int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev);
-int pci_cleanup_aer_error_status_regs(struct pci_dev *dev);
+int pci_aer_clear_nonfatal_status(struct pci_dev *dev);
 void pci_save_aer_state(struct pci_dev *dev);
 void pci_restore_aer_state(struct pci_dev *dev);
 #else
@@ -57,11 +56,7 @@ static inline int pci_disable_pcie_error_reporting(struct pci_dev *dev)
 {
 	return -EINVAL;
 }
-static inline int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev)
-{
-	return -EINVAL;
-}
-static inline int pci_cleanup_aer_error_status_regs(struct pci_dev *dev)
+static inline int pci_aer_clear_nonfatal_status(struct pci_dev *dev)
 {
 	return -EINVAL;
 }
diff --git a/include/linux/bio.h b/include/linux/bio.h
index c1c0f9e..a0ee494 100644
--- a/include/linux/bio.h
+++ b/include/linux/bio.h
@@ -319,7 +319,7 @@ struct bio_integrity_payload {
 	struct work_struct	bip_work;	/* I/O completion */
 
 	struct bio_vec		*bip_vec;
-	struct bio_vec		bip_inline_vecs[0];/* embedded bvec array */
+	struct bio_vec		bip_inline_vecs[];/* embedded bvec array */
 };
 
 #if defined(CONFIG_BLK_DEV_INTEGRITY)
diff --git a/include/linux/bitmap.h b/include/linux/bitmap.h
index e52ceb1..99058eb 100644
--- a/include/linux/bitmap.h
+++ b/include/linux/bitmap.h
@@ -50,7 +50,13 @@
  *  bitmap_set(dst, pos, nbits)                 Set specified bit area
  *  bitmap_clear(dst, pos, nbits)               Clear specified bit area
  *  bitmap_find_next_zero_area(buf, len, pos, n, mask)  Find bit free area
- *  bitmap_find_next_zero_area_off(buf, len, pos, n, mask)  as above
+ *  bitmap_find_next_zero_area_off(buf, len, pos, n, mask, mask_off)  as above
+ *  bitmap_next_clear_region(map, &start, &end, nbits)  Find next clear region
+ *  bitmap_next_set_region(map, &start, &end, nbits)  Find next set region
+ *  bitmap_for_each_clear_region(map, rs, re, start, end)
+ *  						Iterate over all clear regions
+ *  bitmap_for_each_set_region(map, rs, re, start, end)
+ *  						Iterate over all set regions
  *  bitmap_shift_right(dst, src, n, nbits)      *dst = *src >> n
  *  bitmap_shift_left(dst, src, n, nbits)       *dst = *src << n
  *  bitmap_cut(dst, src, first, n, nbits)       Cut n bits from first, copy rest
diff --git a/include/linux/bitops.h b/include/linux/bitops.h
index 47f54b4..9acf654 100644
--- a/include/linux/bitops.h
+++ b/include/linux/bitops.h
@@ -162,7 +162,7 @@ static inline __u8 ror8(__u8 word, unsigned int shift)
  *
  * This is safe to use for 16- and 8-bit types as well.
  */
-static inline __s32 sign_extend32(__u32 value, int index)
+static __always_inline __s32 sign_extend32(__u32 value, int index)
 {
 	__u8 shift = 31 - index;
 	return (__s32)(value << shift) >> shift;
@@ -173,7 +173,7 @@ static inline __s32 sign_extend32(__u32 value, int index)
  * @value: value to sign extend
  * @index: 0 based bit index (0<=index<64) to sign bit
  */
-static inline __s64 sign_extend64(__u64 value, int index)
+static __always_inline __s64 sign_extend64(__u64 value, int index)
 {
 	__u8 shift = 63 - index;
 	return (__s64)(value << shift) >> shift;
diff --git a/include/linux/bits.h b/include/linux/bits.h
index a740bbc..4671fbf 100644
--- a/include/linux/bits.h
+++ b/include/linux/bits.h
@@ -18,12 +18,30 @@
  * position @h. For example
  * GENMASK_ULL(39, 21) gives us the 64bit vector 0x000000ffffe00000.
  */
-#define GENMASK(h, l) \
+#if !defined(__ASSEMBLY__) && \
+	(!defined(CONFIG_CC_IS_GCC) || CONFIG_GCC_VERSION >= 49000)
+#include <linux/build_bug.h>
+#define GENMASK_INPUT_CHECK(h, l) \
+	(BUILD_BUG_ON_ZERO(__builtin_choose_expr( \
+		__builtin_constant_p((l) > (h)), (l) > (h), 0)))
+#else
+/*
+ * BUILD_BUG_ON_ZERO is not available in h files included from asm files,
+ * disable the input check if that is the case.
+ */
+#define GENMASK_INPUT_CHECK(h, l) 0
+#endif
+
+#define __GENMASK(h, l) \
 	(((~UL(0)) - (UL(1) << (l)) + 1) & \
 	 (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
+#define GENMASK(h, l) \
+	(GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
 
-#define GENMASK_ULL(h, l) \
+#define __GENMASK_ULL(h, l) \
 	(((~ULL(0)) - (ULL(1) << (l)) + 1) & \
 	 (~ULL(0) >> (BITS_PER_LONG_LONG - 1 - (h))))
+#define GENMASK_ULL(h, l) \
+	(GENMASK_INPUT_CHECK(h, l) + __GENMASK_ULL(h, l))
 
 #endif	/* __LINUX_BITS_H */
diff --git a/include/linux/blk-cgroup.h b/include/linux/blk-cgroup.h
index e4a6949..35f8ffe 100644
--- a/include/linux/blk-cgroup.h
+++ b/include/linux/blk-cgroup.h
@@ -46,6 +46,7 @@ struct blkcg_gq;
 struct blkcg {
 	struct cgroup_subsys_state	css;
 	spinlock_t			lock;
+	refcount_t			online_pin;
 
 	struct radix_tree_root		blkg_tree;
 	struct blkcg_gq	__rcu		*blkg_hint;
@@ -56,7 +57,6 @@ struct blkcg {
 	struct list_head		all_blkcgs_node;
 #ifdef CONFIG_CGROUP_WRITEBACK
 	struct list_head		cgwb_list;
-	refcount_t			cgwb_refcnt;
 #endif
 };
 
@@ -412,47 +412,38 @@ static inline struct blkcg *cpd_to_blkcg(struct blkcg_policy_data *cpd)
 
 extern void blkcg_destroy_blkgs(struct blkcg *blkcg);
 
-#ifdef CONFIG_CGROUP_WRITEBACK
-
 /**
- * blkcg_cgwb_get - get a reference for blkcg->cgwb_list
+ * blkcg_pin_online - pin online state
  * @blkcg: blkcg of interest
  *
- * This is used to track the number of active wb's related to a blkcg.
+ * While pinned, a blkcg is kept online.  This is primarily used to
+ * impedance-match blkg and cgwb lifetimes so that blkg doesn't go offline
+ * while an associated cgwb is still active.
  */
-static inline void blkcg_cgwb_get(struct blkcg *blkcg)
+static inline void blkcg_pin_online(struct blkcg *blkcg)
 {
-	refcount_inc(&blkcg->cgwb_refcnt);
+	refcount_inc(&blkcg->online_pin);
 }
 
 /**
- * blkcg_cgwb_put - put a reference for @blkcg->cgwb_list
+ * blkcg_unpin_online - unpin online state
  * @blkcg: blkcg of interest
  *
- * This is used to track the number of active wb's related to a blkcg.
- * When this count goes to zero, all active wb has finished so the
+ * This is primarily used to impedance-match blkg and cgwb lifetimes so
+ * that blkg doesn't go offline while an associated cgwb is still active.
+ * When this count goes to zero, all active cgwbs have finished so the
  * blkcg can continue destruction by calling blkcg_destroy_blkgs().
- * This work may occur in cgwb_release_workfn() on the cgwb_release
- * workqueue.
  */
-static inline void blkcg_cgwb_put(struct blkcg *blkcg)
+static inline void blkcg_unpin_online(struct blkcg *blkcg)
 {
-	if (refcount_dec_and_test(&blkcg->cgwb_refcnt))
+	do {
+		if (!refcount_dec_and_test(&blkcg->online_pin))
+			break;
 		blkcg_destroy_blkgs(blkcg);
+		blkcg = blkcg_parent(blkcg);
+	} while (blkcg);
 }
 
-#else
-
-static inline void blkcg_cgwb_get(struct blkcg *blkcg) { }
-
-static inline void blkcg_cgwb_put(struct blkcg *blkcg)
-{
-	/* wb isn't being accounted, so trigger destruction right away */
-	blkcg_destroy_blkgs(blkcg);
-}
-
-#endif
-
 /**
  * blkg_path - format cgroup path of blkg
  * @blkg: blkg of interest
diff --git a/include/linux/blk-mq.h b/include/linux/blk-mq.h
index f389d7c..b45148b 100644
--- a/include/linux/blk-mq.h
+++ b/include/linux/blk-mq.h
@@ -173,7 +173,7 @@ struct blk_mq_hw_ctx {
 	 * blocking (BLK_MQ_F_BLOCKING). Must be the last member - see also
 	 * blk_mq_hw_ctx_size().
 	 */
-	struct srcu_struct	srcu[0];
+	struct srcu_struct	srcu[];
 };
 
 /**
diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h
index 70254ae..31eb928 100644
--- a/include/linux/blk_types.h
+++ b/include/linux/blk_types.h
@@ -198,7 +198,7 @@ struct bio {
 	 * double allocations for a small number of bio_vecs. This member
 	 * MUST obviously be kept at the very end of the bio.
 	 */
-	struct bio_vec		bi_inline_vecs[0];
+	struct bio_vec		bi_inline_vecs[];
 };
 
 #define BIO_RESET_BYTES		offsetof(struct bio, bi_max_vecs)
diff --git a/include/linux/bootconfig.h b/include/linux/bootconfig.h
index d11e183..9903088 100644
--- a/include/linux/bootconfig.h
+++ b/include/linux/bootconfig.h
@@ -216,7 +216,8 @@ static inline int __init xbc_node_compose_key(struct xbc_node *node,
 }
 
 /* XBC node initializer */
-int __init xbc_init(char *buf);
+int __init xbc_init(char *buf, const char **emsg, int *epos);
+
 
 /* XBC cleanup data structures */
 void __init xbc_destroy_all(void);
diff --git a/include/linux/buffer_head.h b/include/linux/buffer_head.h
index e0b020ea..15b765a 100644
--- a/include/linux/buffer_head.h
+++ b/include/linux/buffer_head.h
@@ -189,6 +189,8 @@ struct buffer_head *__getblk_gfp(struct block_device *bdev, sector_t block,
 void __brelse(struct buffer_head *);
 void __bforget(struct buffer_head *);
 void __breadahead(struct block_device *, sector_t block, unsigned int size);
+void __breadahead_gfp(struct block_device *, sector_t block, unsigned int size,
+		  gfp_t gfp);
 struct buffer_head *__bread_gfp(struct block_device *,
 				sector_t block, unsigned size, gfp_t gfp);
 void invalidate_bh_lrus(void);
@@ -319,6 +321,12 @@ sb_breadahead(struct super_block *sb, sector_t block)
 	__breadahead(sb->s_bdev, block, sb->s_blocksize);
 }
 
+static inline void
+sb_breadahead_unmovable(struct super_block *sb, sector_t block)
+{
+	__breadahead_gfp(sb->s_bdev, block, sb->s_blocksize, 0);
+}
+
 static inline struct buffer_head *
 sb_getblk(struct super_block *sb, sector_t block)
 {
diff --git a/include/linux/can/dev/peak_canfd.h b/include/linux/can/dev/peak_canfd.h
index 511a373..5fd627e 100644
--- a/include/linux/can/dev/peak_canfd.h
+++ b/include/linux/can/dev/peak_canfd.h
@@ -189,7 +189,7 @@ struct __packed pucan_rx_msg {
 	u8	client;
 	__le16	flags;
 	__le32	can_id;
-	u8	d[0];
+	u8	d[];
 };
 
 /* uCAN error types */
@@ -266,7 +266,7 @@ struct __packed pucan_tx_msg {
 	u8	client;
 	__le16	flags;
 	__le32	can_id;
-	u8	d[0];
+	u8	d[];
 };
 
 /* build the cmd opcode_channel field with respect to the correct endianness */
diff --git a/include/linux/ceph/ceph_fs.h b/include/linux/ceph/ceph_fs.h
index cb21c5c..ebf5ba6 100644
--- a/include/linux/ceph/ceph_fs.h
+++ b/include/linux/ceph/ceph_fs.h
@@ -444,8 +444,9 @@ union ceph_mds_request_args {
 	} __attribute__ ((packed)) lookupino;
 } __attribute__ ((packed));
 
-#define CEPH_MDS_FLAG_REPLAY        1  /* this is a replayed op */
-#define CEPH_MDS_FLAG_WANT_DENTRY   2  /* want dentry in reply */
+#define CEPH_MDS_FLAG_REPLAY		1 /* this is a replayed op */
+#define CEPH_MDS_FLAG_WANT_DENTRY	2 /* want dentry in reply */
+#define CEPH_MDS_FLAG_ASYNC		4 /* request is asynchronous */
 
 struct ceph_mds_request_head {
 	__le64 oldest_client_tid;
@@ -530,6 +531,9 @@ struct ceph_mds_reply_lease {
 	__le32 seq;
 } __attribute__ ((packed));
 
+#define CEPH_LEASE_VALID        (1 | 2) /* old and new bit values */
+#define CEPH_LEASE_PRIMARY_LINK 4       /* primary linkage */
+
 struct ceph_mds_reply_dirfrag {
 	__le32 frag;            /* fragment */
 	__le32 auth;            /* auth mds, if this is a delegation point */
@@ -564,6 +568,7 @@ struct ceph_filelock {
 #define CEPH_FILE_MODE_RDWR       3  /* RD | WR */
 #define CEPH_FILE_MODE_LAZY       4  /* lazy io */
 #define CEPH_FILE_MODE_BITS       4
+#define CEPH_FILE_MODE_MASK       ((1 << CEPH_FILE_MODE_BITS) - 1)
 
 int ceph_flags_to_mode(int flags);
 
@@ -655,10 +660,19 @@ int ceph_flags_to_mode(int flags);
 #define CEPH_CAP_ANY      (CEPH_CAP_ANY_RD | CEPH_CAP_ANY_EXCL | \
 			   CEPH_CAP_ANY_FILE_WR | CEPH_CAP_FILE_LAZYIO | \
 			   CEPH_CAP_PIN)
+#define CEPH_CAP_ALL_FILE (CEPH_CAP_PIN | CEPH_CAP_ANY_SHARED | \
+			   CEPH_CAP_AUTH_EXCL | CEPH_CAP_XATTR_EXCL | \
+			   CEPH_CAP_ANY_FILE_RD | CEPH_CAP_ANY_FILE_WR)
 
 #define CEPH_CAP_LOCKS (CEPH_LOCK_IFILE | CEPH_LOCK_IAUTH | CEPH_LOCK_ILINK | \
 			CEPH_LOCK_IXATTR)
 
+/* cap masks async dir operations */
+#define CEPH_CAP_DIR_CREATE	CEPH_CAP_FILE_CACHE
+#define CEPH_CAP_DIR_UNLINK	CEPH_CAP_FILE_RD
+#define CEPH_CAP_ANY_DIR_OPS	(CEPH_CAP_FILE_CACHE | CEPH_CAP_FILE_RD | \
+				 CEPH_CAP_FILE_WREXTEND | CEPH_CAP_FILE_LAZYIO)
+
 int ceph_caps_for_mode(int mode);
 
 enum {
diff --git a/include/linux/ceph/debugfs.h b/include/linux/ceph/debugfs.h
index cf5e840..8b3a1a7 100644
--- a/include/linux/ceph/debugfs.h
+++ b/include/linux/ceph/debugfs.h
@@ -2,22 +2,8 @@
 #ifndef _FS_CEPH_DEBUGFS_H
 #define _FS_CEPH_DEBUGFS_H
 
-#include <linux/ceph/ceph_debug.h>
 #include <linux/ceph/types.h>
 
-#define CEPH_DEFINE_SHOW_FUNC(name)					\
-static int name##_open(struct inode *inode, struct file *file)		\
-{									\
-	return single_open(file, name, inode->i_private);		\
-}									\
-									\
-static const struct file_operations name##_fops = {			\
-	.open		= name##_open,					\
-	.read		= seq_read,					\
-	.llseek		= seq_lseek,					\
-	.release	= single_release,				\
-};
-
 /* debugfs.c */
 extern void ceph_debugfs_init(void);
 extern void ceph_debugfs_cleanup(void);
diff --git a/include/linux/ceph/libceph.h b/include/linux/ceph/libceph.h
index ec73ebc..525b7c3 100644
--- a/include/linux/ceph/libceph.h
+++ b/include/linux/ceph/libceph.h
@@ -272,6 +272,7 @@ extern struct kmem_cache *ceph_cap_flush_cachep;
 extern struct kmem_cache *ceph_dentry_cachep;
 extern struct kmem_cache *ceph_file_cachep;
 extern struct kmem_cache *ceph_dir_file_cachep;
+extern struct kmem_cache *ceph_mds_request_cachep;
 
 /* ceph_common.c */
 extern bool libceph_compatible(void *data);
diff --git a/include/linux/ceph/osd_client.h b/include/linux/ceph/osd_client.h
index 5a62dbd..9d9f745 100644
--- a/include/linux/ceph/osd_client.h
+++ b/include/linux/ceph/osd_client.h
@@ -509,23 +509,6 @@ int ceph_osdc_call(struct ceph_osd_client *osdc,
 		   struct page *req_page, size_t req_len,
 		   struct page **resp_pages, size_t *resp_len);
 
-extern int ceph_osdc_readpages(struct ceph_osd_client *osdc,
-			       struct ceph_vino vino,
-			       struct ceph_file_layout *layout,
-			       u64 off, u64 *plen,
-			       u32 truncate_seq, u64 truncate_size,
-			       struct page **pages, int nr_pages,
-			       int page_align);
-
-extern int ceph_osdc_writepages(struct ceph_osd_client *osdc,
-				struct ceph_vino vino,
-				struct ceph_file_layout *layout,
-				struct ceph_snap_context *sc,
-				u64 off, u64 len,
-				u32 truncate_seq, u64 truncate_size,
-				struct timespec64 *mtime,
-				struct page **pages, int nr_pages);
-
 int ceph_osdc_copy_from(struct ceph_osd_client *osdc,
 			u64 src_snapid, u64 src_version,
 			struct ceph_object_id *src_oid,
diff --git a/include/linux/cgroup-defs.h b/include/linux/cgroup-defs.h
index e1fafed..5266115 100644
--- a/include/linux/cgroup-defs.h
+++ b/include/linux/cgroup-defs.h
@@ -633,8 +633,9 @@ struct cgroup_subsys {
 	void (*cancel_attach)(struct cgroup_taskset *tset);
 	void (*attach)(struct cgroup_taskset *tset);
 	void (*post_attach)(void);
-	int (*can_fork)(struct task_struct *task);
-	void (*cancel_fork)(struct task_struct *task);
+	int (*can_fork)(struct task_struct *task,
+			struct css_set *cset);
+	void (*cancel_fork)(struct task_struct *task, struct css_set *cset);
 	void (*fork)(struct task_struct *task);
 	void (*exit)(struct task_struct *task);
 	void (*release)(struct task_struct *task);
diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h
index e75d2191..4598e4d 100644
--- a/include/linux/cgroup.h
+++ b/include/linux/cgroup.h
@@ -27,6 +27,8 @@
 
 #include <linux/cgroup-defs.h>
 
+struct kernel_clone_args;
+
 #ifdef CONFIG_CGROUPS
 
 /*
@@ -58,9 +60,6 @@ struct css_task_iter {
 	struct list_head		*tcset_head;
 
 	struct list_head		*task_pos;
-	struct list_head		*tasks_head;
-	struct list_head		*mg_tasks_head;
-	struct list_head		*dying_tasks_head;
 
 	struct list_head		*cur_tasks_head;
 	struct css_set			*cur_cset;
@@ -122,9 +121,12 @@ int proc_cgroup_show(struct seq_file *m, struct pid_namespace *ns,
 		     struct pid *pid, struct task_struct *tsk);
 
 void cgroup_fork(struct task_struct *p);
-extern int cgroup_can_fork(struct task_struct *p);
-extern void cgroup_cancel_fork(struct task_struct *p);
-extern void cgroup_post_fork(struct task_struct *p);
+extern int cgroup_can_fork(struct task_struct *p,
+			   struct kernel_clone_args *kargs);
+extern void cgroup_cancel_fork(struct task_struct *p,
+			       struct kernel_clone_args *kargs);
+extern void cgroup_post_fork(struct task_struct *p,
+			     struct kernel_clone_args *kargs);
 void cgroup_exit(struct task_struct *p);
 void cgroup_release(struct task_struct *p);
 void cgroup_free(struct task_struct *p);
@@ -708,9 +710,12 @@ static inline int cgroupstats_build(struct cgroupstats *stats,
 				    struct dentry *dentry) { return -EINVAL; }
 
 static inline void cgroup_fork(struct task_struct *p) {}
-static inline int cgroup_can_fork(struct task_struct *p) { return 0; }
-static inline void cgroup_cancel_fork(struct task_struct *p) {}
-static inline void cgroup_post_fork(struct task_struct *p) {}
+static inline int cgroup_can_fork(struct task_struct *p,
+				  struct kernel_clone_args *kargs) { return 0; }
+static inline void cgroup_cancel_fork(struct task_struct *p,
+				      struct kernel_clone_args *kargs) {}
+static inline void cgroup_post_fork(struct task_struct *p,
+				    struct kernel_clone_args *kargs) {}
 static inline void cgroup_exit(struct task_struct *p) {}
 static inline void cgroup_release(struct task_struct *p) {}
 static inline void cgroup_free(struct task_struct *p) {}
diff --git a/include/linux/clk/at91_pmc.h b/include/linux/clk/at91_pmc.h
index 39043788..49a53a1 100644
--- a/include/linux/clk/at91_pmc.h
+++ b/include/linux/clk/at91_pmc.h
@@ -12,6 +12,9 @@
 #ifndef AT91_PMC_H
 #define AT91_PMC_H
 
+#define AT91_PMC_V1		(1)			/* PMC version 1 */
+#define AT91_PMC_V2		(2)			/* PMC version 2 [SAM9X60] */
+
 #define	AT91_PMC_SCER		0x00			/* System Clock Enable Register */
 #define	AT91_PMC_SCDR		0x04			/* System Clock Disable Register */
 
@@ -30,16 +33,34 @@
 #define		AT91_PMC_HCK0		(1 << 16)		/* AHB Clock (USB host) [AT91SAM9261 only] */
 #define		AT91_PMC_HCK1		(1 << 17)		/* AHB Clock (LCD) [AT91SAM9261 only] */
 
+#define AT91_PMC_PLL_CTRL0		0x0C		/* PLL Control Register 0 [for SAM9X60] */
+#define		AT91_PMC_PLL_CTRL0_ENPLL	(1 << 28)	/* Enable PLL */
+#define		AT91_PMC_PLL_CTRL0_ENPLLCK	(1 << 29)	/* Enable PLL clock for PMC */
+#define		AT91_PMC_PLL_CTRL0_ENLOCK	(1 << 31)	/* Enable PLL lock */
+
+#define AT91_PMC_PLL_CTRL1		0x10		/* PLL Control Register 1 [for SAM9X60] */
+
 #define	AT91_PMC_PCER		0x10			/* Peripheral Clock Enable Register */
 #define	AT91_PMC_PCDR		0x14			/* Peripheral Clock Disable Register */
 #define	AT91_PMC_PCSR		0x18			/* Peripheral Clock Status Register */
 
+#define AT91_PMC_PLL_ACR	0x18			/* PLL Analog Control Register [for SAM9X60] */
+#define		AT91_PMC_PLL_ACR_DEFAULT_UPLL	0x12020010UL	/* Default PLL ACR value for UPLL */
+#define		AT91_PMC_PLL_ACR_DEFAULT_PLLA	0x00020010UL	/* Default PLL ACR value for PLLA */
+#define		AT91_PMC_PLL_ACR_UTMIVR		(1 << 12)	/* UPLL Voltage regulator Control */
+#define		AT91_PMC_PLL_ACR_UTMIBG		(1 << 13)	/* UPLL Bandgap Control */
+
 #define	AT91_CKGR_UCKR		0x1C			/* UTMI Clock Register [some SAM9] */
 #define		AT91_PMC_UPLLEN		(1   << 16)		/* UTMI PLL Enable */
 #define		AT91_PMC_UPLLCOUNT	(0xf << 20)		/* UTMI PLL Start-up Time */
 #define		AT91_PMC_BIASEN		(1   << 24)		/* UTMI BIAS Enable */
 #define		AT91_PMC_BIASCOUNT	(0xf << 28)		/* UTMI BIAS Start-up Time */
 
+#define AT91_PMC_PLL_UPDT		0x1C		/* PMC PLL update register [for SAM9X60] */
+#define		AT91_PMC_PLL_UPDT_UPDATE	(1 << 8)	/* Update PLL settings */
+#define		AT91_PMC_PLL_UPDT_ID		(1 << 0)	/* PLL ID */
+#define		AT91_PMC_PLL_UPDT_STUPTIM	(0xff << 16)	/* Startup time */
+
 #define	AT91_CKGR_MOR		0x20			/* Main Oscillator Register [not on SAM9RL] */
 #define		AT91_PMC_MOSCEN		(1    <<  0)		/* Main Oscillator Enable */
 #define		AT91_PMC_OSCBYPASS	(1    <<  1)		/* Oscillator Bypass */
@@ -180,6 +201,8 @@
 #define		AT91_PMC_WPVS		(0x1  <<  0)		/* Write Protect Violation Status */
 #define		AT91_PMC_WPVSRC		(0xffff  <<  8)		/* Write Protect Violation Source */
 
+#define AT91_PMC_PLL_ISR0	0xEC			/* PLL Interrupt Status Register 0 [SAM9X60 only] */
+
 #define AT91_PMC_PCER1		0x100			/* Peripheral Clock Enable Register 1 [SAMA5 only]*/
 #define AT91_PMC_PCDR1		0x104			/* Peripheral Clock Enable Register 1 */
 #define AT91_PMC_PCSR1		0x108			/* Peripheral Clock Enable Register 1 */
diff --git a/include/linux/cma.h b/include/linux/cma.h
index 190184b..6ff79fe 100644
--- a/include/linux/cma.h
+++ b/include/linux/cma.h
@@ -4,6 +4,7 @@
 
 #include <linux/init.h>
 #include <linux/types.h>
+#include <linux/numa.h>
 
 /*
  * There is always at least global CMA area and a few optional
@@ -24,10 +25,19 @@ extern phys_addr_t cma_get_base(const struct cma *cma);
 extern unsigned long cma_get_size(const struct cma *cma);
 extern const char *cma_get_name(const struct cma *cma);
 
-extern int __init cma_declare_contiguous(phys_addr_t base,
+extern int __init cma_declare_contiguous_nid(phys_addr_t base,
 			phys_addr_t size, phys_addr_t limit,
 			phys_addr_t alignment, unsigned int order_per_bit,
-			bool fixed, const char *name, struct cma **res_cma);
+			bool fixed, const char *name, struct cma **res_cma,
+			int nid);
+static inline int __init cma_declare_contiguous(phys_addr_t base,
+			phys_addr_t size, phys_addr_t limit,
+			phys_addr_t alignment, unsigned int order_per_bit,
+			bool fixed, const char *name, struct cma **res_cma)
+{
+	return cma_declare_contiguous_nid(base, size, limit, alignment,
+			order_per_bit, fixed, name, res_cma, NUMA_NO_NODE);
+}
 extern int cma_init_reserved_mem(phys_addr_t base, phys_addr_t size,
 					unsigned int order_per_bit,
 					const char *name,
diff --git a/include/linux/compiler.h b/include/linux/compiler.h
index 5e88e7e..034b0a6 100644
--- a/include/linux/compiler.h
+++ b/include/linux/compiler.h
@@ -347,7 +347,7 @@ static inline void *offset_to_ptr(const int *off)
  * compiler has support to do so.
  */
 #define compiletime_assert(condition, msg) \
-	_compiletime_assert(condition, msg, __compiletime_assert_, __LINE__)
+	_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
 
 #define compiletime_assert_atomic_type(t)				\
 	compiletime_assert(__native_word(t),				\
diff --git a/include/linux/compiler_types.h b/include/linux/compiler_types.h
index 72393a8..e970f97 100644
--- a/include/linux/compiler_types.h
+++ b/include/linux/compiler_types.h
@@ -129,22 +129,13 @@ struct ftrace_likely_data {
 #define __compiler_offsetof(a, b)	__builtin_offsetof(a, b)
 
 /*
- * Force always-inline if the user requests it so via the .config.
  * Prefer gnu_inline, so that extern inline functions do not emit an
  * externally visible function. This makes extern inline behave as per gnu89
  * semantics rather than c99. This prevents multiple symbol definition errors
  * of extern inline functions at link time.
  * A lot of inline functions can cause havoc with function tracing.
- * Do not use __always_inline here, since currently it expands to inline again
- * (which would break users of __always_inline).
  */
-#if !defined(CONFIG_OPTIMIZE_INLINING)
-#define inline inline __attribute__((__always_inline__)) __gnu_inline \
-	__inline_maybe_unused notrace
-#else
-#define inline inline                                    __gnu_inline \
-	__inline_maybe_unused notrace
-#endif
+#define inline inline __gnu_inline __inline_maybe_unused notrace
 
 /*
  * gcc provides both __inline__ and __inline as alternate spellings of
diff --git a/include/linux/coresight.h b/include/linux/coresight.h
index 44e552d..193cc9d 100644
--- a/include/linux/coresight.h
+++ b/include/linux/coresight.h
@@ -41,6 +41,7 @@ enum coresight_dev_type {
 	CORESIGHT_DEV_TYPE_LINKSINK,
 	CORESIGHT_DEV_TYPE_SOURCE,
 	CORESIGHT_DEV_TYPE_HELPER,
+	CORESIGHT_DEV_TYPE_ECT,
 };
 
 enum coresight_dev_subtype_sink {
@@ -68,6 +69,12 @@ enum coresight_dev_subtype_helper {
 	CORESIGHT_DEV_SUBTYPE_HELPER_CATU,
 };
 
+/* Embedded Cross Trigger (ECT) sub-types */
+enum coresight_dev_subtype_ect {
+	CORESIGHT_DEV_SUBTYPE_ECT_NONE,
+	CORESIGHT_DEV_SUBTYPE_ECT_CTI,
+};
+
 /**
  * union coresight_dev_subtype - further characterisation of a type
  * @sink_subtype:	type of sink this component is, as defined
@@ -78,6 +85,8 @@ enum coresight_dev_subtype_helper {
  *			by @coresight_dev_subtype_source.
  * @helper_subtype:	type of helper this component is, as defined
  *			by @coresight_dev_subtype_helper.
+ * @ect_subtype:        type of cross trigger this component is, as
+ *			defined by @coresight_dev_subtype_ect
  */
 union coresight_dev_subtype {
 	/* We have some devices which acts as LINK and SINK */
@@ -87,6 +96,7 @@ union coresight_dev_subtype {
 	};
 	enum coresight_dev_subtype_source source_subtype;
 	enum coresight_dev_subtype_helper helper_subtype;
+	enum coresight_dev_subtype_ect ect_subtype;
 };
 
 /**
@@ -153,6 +163,8 @@ struct coresight_connection {
  *		activated but not yet enabled.  Enabling for a _sink_
  *		appens when a source has been selected for that it.
  * @ea:		Device attribute for sink representation under PMU directory.
+ * @ect_dev:	Associated cross trigger device. Not part of the trace data
+ *		path or connections.
  */
 struct coresight_device {
 	struct coresight_platform_data *pdata;
@@ -166,6 +178,8 @@ struct coresight_device {
 	/* sink specific fields */
 	bool activated;	/* true only if a sink is part of a path */
 	struct dev_ext_attribute *ea;
+	/* cross trigger handling */
+	struct coresight_device *ect_dev;
 };
 
 /*
@@ -196,6 +210,7 @@ static struct coresight_dev_list (var) = {				\
 #define sink_ops(csdev)		csdev->ops->sink_ops
 #define link_ops(csdev)		csdev->ops->link_ops
 #define helper_ops(csdev)	csdev->ops->helper_ops
+#define ect_ops(csdev)		csdev->ops->ect_ops
 
 /**
  * struct coresight_ops_sink - basic operations for a sink
@@ -262,11 +277,23 @@ struct coresight_ops_helper {
 	int (*disable)(struct coresight_device *csdev, void *data);
 };
 
+/**
+ * struct coresight_ops_ect - Ops for an embedded cross trigger device
+ *
+ * @enable	: Enable the device
+ * @disable	: Disable the device
+ */
+struct coresight_ops_ect {
+	int (*enable)(struct coresight_device *csdev);
+	int (*disable)(struct coresight_device *csdev);
+};
+
 struct coresight_ops {
 	const struct coresight_ops_sink *sink_ops;
 	const struct coresight_ops_link *link_ops;
 	const struct coresight_ops_source *source_ops;
 	const struct coresight_ops_helper *helper_ops;
+	const struct coresight_ops_ect *ect_ops;
 };
 
 #ifdef CONFIG_CORESIGHT
diff --git a/include/linux/cpu_rmap.h b/include/linux/cpu_rmap.h
index 02edeaf..be8aea0 100644
--- a/include/linux/cpu_rmap.h
+++ b/include/linux/cpu_rmap.h
@@ -28,7 +28,7 @@ struct cpu_rmap {
 	struct {
 		u16	index;
 		u16	dist;
-	}		near[0];
+	}		near[];
 };
 #define CPU_RMAP_DIST_INF 0xffff
 
diff --git a/include/linux/dax.h b/include/linux/dax.h
index 328c2db..d7af5d2 100644
--- a/include/linux/dax.h
+++ b/include/linux/dax.h
@@ -13,6 +13,7 @@
 typedef unsigned long dax_entry_t;
 
 struct iomap_ops;
+struct iomap;
 struct dax_device;
 struct dax_operations {
 	/*
@@ -34,6 +35,8 @@ struct dax_operations {
 	/* copy_to_iter: required operation for fs-dax direct-i/o */
 	size_t (*copy_to_iter)(struct dax_device *, pgoff_t, void *, size_t,
 			struct iov_iter *);
+	/* zero_page_range: required operation. Zero page range   */
+	int (*zero_page_range)(struct dax_device *, pgoff_t, size_t);
 };
 
 extern struct attribute_group dax_attribute_group;
@@ -199,6 +202,8 @@ size_t dax_copy_from_iter(struct dax_device *dax_dev, pgoff_t pgoff, void *addr,
 		size_t bytes, struct iov_iter *i);
 size_t dax_copy_to_iter(struct dax_device *dax_dev, pgoff_t pgoff, void *addr,
 		size_t bytes, struct iov_iter *i);
+int dax_zero_page_range(struct dax_device *dax_dev, pgoff_t pgoff,
+			size_t nr_pages);
 void dax_flush(struct dax_device *dax_dev, void *addr, size_t size);
 
 ssize_t dax_iomap_rw(struct kiocb *iocb, struct iov_iter *iter,
@@ -210,20 +215,8 @@ vm_fault_t dax_finish_sync_fault(struct vm_fault *vmf,
 int dax_delete_mapping_entry(struct address_space *mapping, pgoff_t index);
 int dax_invalidate_mapping_entry_sync(struct address_space *mapping,
 				      pgoff_t index);
-
-#ifdef CONFIG_FS_DAX
-int __dax_zero_page_range(struct block_device *bdev,
-		struct dax_device *dax_dev, sector_t sector,
-		unsigned int offset, unsigned int length);
-#else
-static inline int __dax_zero_page_range(struct block_device *bdev,
-		struct dax_device *dax_dev, sector_t sector,
-		unsigned int offset, unsigned int length)
-{
-	return -ENXIO;
-}
-#endif
-
+int dax_iomap_zero(loff_t pos, unsigned offset, unsigned size,
+			struct iomap *iomap);
 static inline bool dax_mapping(struct address_space *mapping)
 {
 	return mapping->host && IS_DAX(mapping->host);
diff --git a/include/linux/devfreq_cooling.h b/include/linux/devfreq_cooling.h
index 4635f95..79a6e37 100644
--- a/include/linux/devfreq_cooling.h
+++ b/include/linux/devfreq_cooling.h
@@ -75,7 +75,7 @@ void devfreq_cooling_unregister(struct thermal_cooling_device *dfc);
 
 #else /* !CONFIG_DEVFREQ_THERMAL */
 
-struct thermal_cooling_device *
+static inline struct thermal_cooling_device *
 of_devfreq_cooling_register_power(struct device_node *np, struct devfreq *df,
 				  struct devfreq_cooling_power *dfc_power)
 {
diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h
index 475668c..af48d9da 100644
--- a/include/linux/device-mapper.h
+++ b/include/linux/device-mapper.h
@@ -141,6 +141,8 @@ typedef long (*dm_dax_direct_access_fn) (struct dm_target *ti, pgoff_t pgoff,
 		long nr_pages, void **kaddr, pfn_t *pfn);
 typedef size_t (*dm_dax_copy_iter_fn)(struct dm_target *ti, pgoff_t pgoff,
 		void *addr, size_t bytes, struct iov_iter *i);
+typedef int (*dm_dax_zero_page_range_fn)(struct dm_target *ti, pgoff_t pgoff,
+		size_t nr_pages);
 #define PAGE_SECTORS (PAGE_SIZE / 512)
 
 void dm_error(const char *message);
@@ -195,6 +197,7 @@ struct target_type {
 	dm_dax_direct_access_fn direct_access;
 	dm_dax_copy_iter_fn dax_copy_from_iter;
 	dm_dax_copy_iter_fn dax_copy_to_iter;
+	dm_dax_zero_page_range_fn dax_zero_page_range;
 
 	/* For internal device-mapper use. */
 	struct list_head list;
diff --git a/include/linux/device.h b/include/linux/device.h
index 1311f27..ac8e37c 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -42,9 +42,8 @@ struct device_node;
 struct fwnode_handle;
 struct iommu_ops;
 struct iommu_group;
-struct iommu_fwspec;
 struct dev_pin_info;
-struct iommu_param;
+struct dev_iommu;
 
 /**
  * struct subsys_interface - interfaces to device functions
@@ -513,8 +512,7 @@ struct dev_links_info {
  * 		gone away. This should be set by the allocator of the
  * 		device (i.e. the bus driver that discovered the device).
  * @iommu_group: IOMMU group the device belongs to.
- * @iommu_fwspec: IOMMU-specific properties supplied by firmware.
- * @iommu_param: Per device generic IOMMU runtime data
+ * @iommu:	Per device generic IOMMU runtime data
  *
  * @offline_disabled: If set, the device is permanently online.
  * @offline:	Set after successful invocation of bus type's .offline().
@@ -613,8 +611,7 @@ struct device {
 
 	void	(*release)(struct device *dev);
 	struct iommu_group	*iommu_group;
-	struct iommu_fwspec	*iommu_fwspec;
-	struct iommu_param	*iommu_param;
+	struct dev_iommu	*iommu;
 
 	bool			offline_disabled:1;
 	bool			offline:1;
diff --git a/include/linux/digsig.h b/include/linux/digsig.h
index 594fc66..2ace69e 100644
--- a/include/linux/digsig.h
+++ b/include/linux/digsig.h
@@ -29,7 +29,7 @@ struct pubkey_hdr {
 	uint32_t	timestamp;	/* key made, always 0 for now */
 	uint8_t		algo;
 	uint8_t		nmpi;
-	char		mpi[0];
+	char		mpi[];
 } __packed;
 
 struct signature_hdr {
@@ -39,7 +39,7 @@ struct signature_hdr {
 	uint8_t		hash;
 	uint8_t		keyid[8];
 	uint8_t		nmpi;
-	char		mpi[0];
+	char		mpi[];
 } __packed;
 
 #if defined(CONFIG_SIGNATURE) || defined(CONFIG_SIGNATURE_MODULE)
diff --git a/include/linux/dirent.h b/include/linux/dirent.h
index fc61f3c..9900222 100644
--- a/include/linux/dirent.h
+++ b/include/linux/dirent.h
@@ -7,7 +7,7 @@ struct linux_dirent64 {
 	s64		d_off;
 	unsigned short	d_reclen;
 	unsigned char	d_type;
-	char		d_name[0];
+	char		d_name[];
 };
 
 #endif
diff --git a/include/linux/dma-noncoherent.h b/include/linux/dma-noncoherent.h
index ca9b577..b59f1b6 100644
--- a/include/linux/dma-noncoherent.h
+++ b/include/linux/dma-noncoherent.h
@@ -108,7 +108,7 @@ static inline void arch_dma_prep_coherent(struct page *page, size_t size)
 }
 #endif /* CONFIG_ARCH_HAS_DMA_PREP_COHERENT */
 
-void *uncached_kernel_address(void *addr);
-void *cached_kernel_address(void *addr);
+void *arch_dma_set_uncached(void *addr, size_t size);
+void arch_dma_clear_uncached(void *addr, size_t size);
 
 #endif /* _LINUX_DMA_NONCOHERENT_H */
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index 64461fc..21065c0 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -300,6 +300,8 @@ struct dma_router {
  * @chan_id: channel ID for sysfs
  * @dev: class device for sysfs
  * @name: backlink name for sysfs
+ * @dbg_client_name: slave name for debugfs in format:
+ *	dev_name(requester's dev):channel name, for example: "2b00000.mcasp:tx"
  * @device_node: used to add this to the device chan list
  * @local: per-cpu pointer to a struct dma_chan_percpu
  * @client_count: how many clients are using this channel
@@ -318,6 +320,9 @@ struct dma_chan {
 	int chan_id;
 	struct dma_chan_dev *dev;
 	const char *name;
+#ifdef CONFIG_DEBUG_FS
+	char *dbg_client_name;
+#endif
 
 	struct list_head device_node;
 	struct dma_chan_percpu __percpu *local;
@@ -618,10 +623,11 @@ static inline void dmaengine_unmap_put(struct dmaengine_unmap_data *unmap)
 
 static inline void dma_descriptor_unmap(struct dma_async_tx_descriptor *tx)
 {
-	if (tx->unmap) {
-		dmaengine_unmap_put(tx->unmap);
-		tx->unmap = NULL;
-	}
+	if (!tx->unmap)
+		return;
+
+	dmaengine_unmap_put(tx->unmap);
+	tx->unmap = NULL;
 }
 
 #ifndef CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH
@@ -805,7 +811,9 @@ struct dma_filter {
  *     called and there are no further references to this structure. This
  *     must be implemented to free resources however many existing drivers
  *     do not and are therefore not safe to unbind while in use.
- *
+ * @dbg_summary_show: optional routine to show contents in debugfs; default code
+ *     will be used when this is omitted, but custom code can show extra,
+ *     controller specific information.
  */
 struct dma_device {
 	struct kref ref;
@@ -891,6 +899,11 @@ struct dma_device {
 					    struct dma_tx_state *txstate);
 	void (*device_issue_pending)(struct dma_chan *chan);
 	void (*device_release)(struct dma_device *dev);
+	/* debugfs support */
+#ifdef CONFIG_DEBUG_FS
+	void (*dbg_summary_show)(struct seq_file *s, struct dma_device *dev);
+	struct dentry *dbg_dev_root;
+#endif
 };
 
 static inline int dmaengine_slave_config(struct dma_chan *chan,
@@ -1155,14 +1168,7 @@ static inline dma_cookie_t dmaengine_submit(struct dma_async_tx_descriptor *desc
 static inline bool dmaengine_check_align(enum dmaengine_alignment align,
 					 size_t off1, size_t off2, size_t len)
 {
-	size_t mask;
-
-	if (!align)
-		return true;
-	mask = (1 << align) - 1;
-	if (mask & (off1 | off2 | len))
-		return false;
-	return true;
+	return !(((1 << align) - 1) & (off1 | off2 | len));
 }
 
 static inline bool is_dma_copy_aligned(struct dma_device *dev, size_t off1,
@@ -1236,9 +1242,9 @@ static inline int dma_maxpq(struct dma_device *dma, enum dma_ctrl_flags flags)
 {
 	if (dma_dev_has_pq_continue(dma) || !dmaf_continue(flags))
 		return dma_dev_to_maxpq(dma);
-	else if (dmaf_p_disabled_continue(flags))
+	if (dmaf_p_disabled_continue(flags))
 		return dma_dev_to_maxpq(dma) - 1;
-	else if (dmaf_continue(flags))
+	if (dmaf_continue(flags))
 		return dma_dev_to_maxpq(dma) - 3;
 	BUG();
 }
@@ -1249,7 +1255,7 @@ static inline size_t dmaengine_get_icg(bool inc, bool sgl, size_t icg,
 	if (inc) {
 		if (dir_icg)
 			return dir_icg;
-		else if (sgl)
+		if (sgl)
 			return icg;
 	}
 
@@ -1415,11 +1421,12 @@ static inline enum dma_status dma_async_is_complete(dma_cookie_t cookie,
 static inline void
 dma_set_tx_state(struct dma_tx_state *st, dma_cookie_t last, dma_cookie_t used, u32 residue)
 {
-	if (st) {
-		st->last = last;
-		st->used = used;
-		st->residue = residue;
-	}
+	if (!st)
+		return;
+
+	st->last = last;
+	st->used = used;
+	st->residue = residue;
 }
 
 #ifdef CONFIG_DMA_ENGINE
@@ -1496,12 +1503,11 @@ static inline int dmaengine_desc_set_reuse(struct dma_async_tx_descriptor *tx)
 	if (ret)
 		return ret;
 
-	if (caps.descriptor_reuse) {
-		tx->flags |= DMA_CTRL_REUSE;
-		return 0;
-	} else {
+	if (!caps.descriptor_reuse)
 		return -EPERM;
-	}
+
+	tx->flags |= DMA_CTRL_REUSE;
+	return 0;
 }
 
 static inline void dmaengine_desc_clear_reuse(struct dma_async_tx_descriptor *tx)
@@ -1517,10 +1523,10 @@ static inline bool dmaengine_desc_test_reuse(struct dma_async_tx_descriptor *tx)
 static inline int dmaengine_desc_free(struct dma_async_tx_descriptor *desc)
 {
 	/* this is supported for reusable desc, so check that */
-	if (dmaengine_desc_test_reuse(desc))
-		return desc->desc_free(desc);
-	else
+	if (!dmaengine_desc_test_reuse(desc))
 		return -EPERM;
+
+	return desc->desc_free(desc);
 }
 
 /* --- DMA device --- */
@@ -1566,9 +1572,7 @@ dmaengine_get_direction_text(enum dma_transfer_direction dir)
 	case DMA_DEV_TO_DEV:
 		return "DEV_TO_DEV";
 	default:
-		break;
+		return "invalid";
 	}
-
-	return "invalid";
 }
 #endif /* DMAENGINE_H */
diff --git a/include/linux/enclosure.h b/include/linux/enclosure.h
index 564e96f..1c630e2 100644
--- a/include/linux/enclosure.h
+++ b/include/linux/enclosure.h
@@ -101,7 +101,7 @@ struct enclosure_device {
 	struct device edev;
 	struct enclosure_component_callbacks *cb;
 	int components;
-	struct enclosure_component component[0];
+	struct enclosure_component component[];
 };
 
 static inline struct enclosure_device *
diff --git a/include/linux/energy_model.h b/include/linux/energy_model.h
index d249b88..ade6486 100644
--- a/include/linux/energy_model.h
+++ b/include/linux/energy_model.h
@@ -36,7 +36,7 @@ struct em_cap_state {
 struct em_perf_domain {
 	struct em_cap_state *table;
 	int nr_cap_states;
-	unsigned long cpus[0];
+	unsigned long cpus[];
 };
 
 #ifdef CONFIG_ENERGY_MODEL
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index c1d379bf..a23b26e 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -35,7 +35,7 @@ struct compat_ethtool_rxnfc {
 	compat_u64			data;
 	struct compat_ethtool_rx_flow_spec fs;
 	u32				rule_cnt;
-	u32				rule_locs[0];
+	u32				rule_locs[];
 };
 
 #endif /* CONFIG_COMPAT */
@@ -462,7 +462,7 @@ int ethtool_check_ops(const struct ethtool_ops *ops);
 
 struct ethtool_rx_flow_rule {
 	struct flow_rule	*rule;
-	unsigned long		priv[0];
+	unsigned long		priv[];
 };
 
 struct ethtool_rx_flow_spec_input {
diff --git a/include/linux/extcon-provider.h b/include/linux/extcon-provider.h
index 1c143d20..fa70945 100644
--- a/include/linux/extcon-provider.h
+++ b/include/linux/extcon-provider.h
@@ -17,30 +17,30 @@ struct extcon_dev;
 #if IS_ENABLED(CONFIG_EXTCON)
 
 /* Following APIs register/unregister the extcon device. */
-extern int extcon_dev_register(struct extcon_dev *edev);
-extern void extcon_dev_unregister(struct extcon_dev *edev);
-extern int devm_extcon_dev_register(struct device *dev,
+int extcon_dev_register(struct extcon_dev *edev);
+void extcon_dev_unregister(struct extcon_dev *edev);
+int devm_extcon_dev_register(struct device *dev,
 				struct extcon_dev *edev);
-extern void devm_extcon_dev_unregister(struct device *dev,
+void devm_extcon_dev_unregister(struct device *dev,
 				struct extcon_dev *edev);
 
 /* Following APIs allocate/free the memory of the extcon device. */
-extern struct extcon_dev *extcon_dev_allocate(const unsigned int *cable);
-extern void extcon_dev_free(struct extcon_dev *edev);
-extern struct extcon_dev *devm_extcon_dev_allocate(struct device *dev,
+struct extcon_dev *extcon_dev_allocate(const unsigned int *cable);
+void extcon_dev_free(struct extcon_dev *edev);
+struct extcon_dev *devm_extcon_dev_allocate(struct device *dev,
 				const unsigned int *cable);
-extern void devm_extcon_dev_free(struct device *dev, struct extcon_dev *edev);
+void devm_extcon_dev_free(struct device *dev, struct extcon_dev *edev);
 
 /* Synchronize the state and property value for each external connector. */
-extern int extcon_sync(struct extcon_dev *edev, unsigned int id);
+int extcon_sync(struct extcon_dev *edev, unsigned int id);
 
 /*
  * Following APIs set the connected state of each external connector.
  * The 'id' argument indicates the defined external connector.
  */
-extern int extcon_set_state(struct extcon_dev *edev, unsigned int id,
+int extcon_set_state(struct extcon_dev *edev, unsigned int id,
 				bool state);
-extern int extcon_set_state_sync(struct extcon_dev *edev, unsigned int id,
+int extcon_set_state_sync(struct extcon_dev *edev, unsigned int id,
 				bool state);
 
 /*
@@ -52,13 +52,13 @@ extern int extcon_set_state_sync(struct extcon_dev *edev, unsigned int id,
  * for each external connector. They are used to set the capability of the
  * property of each external connector based on the id and property.
  */
-extern int extcon_set_property(struct extcon_dev *edev, unsigned int id,
+int extcon_set_property(struct extcon_dev *edev, unsigned int id,
 				unsigned int prop,
 				union extcon_property_value prop_val);
-extern int extcon_set_property_sync(struct extcon_dev *edev, unsigned int id,
+int extcon_set_property_sync(struct extcon_dev *edev, unsigned int id,
 				unsigned int prop,
 				union extcon_property_value prop_val);
-extern int extcon_set_property_capability(struct extcon_dev *edev,
+int extcon_set_property_capability(struct extcon_dev *edev,
 				unsigned int id, unsigned int prop);
 
 #else /* CONFIG_EXTCON */
diff --git a/include/linux/extcon.h b/include/linux/extcon.h
index 1b1d77e..fd183fb 100644
--- a/include/linux/extcon.h
+++ b/include/linux/extcon.h
@@ -286,6 +286,11 @@ static inline struct extcon_dev *extcon_get_edev_by_phandle(struct device *dev,
 {
 	return ERR_PTR(-ENODEV);
 }
+
+static inline const char *extcon_get_edev_name(struct extcon_dev *edev)
+{
+	return NULL;
+}
 #endif /* CONFIG_EXTCON */
 
 /*
diff --git a/include/linux/f2fs_fs.h b/include/linux/f2fs_fs.h
index ac3f488..3c383dd 100644
--- a/include/linux/f2fs_fs.h
+++ b/include/linux/f2fs_fs.h
@@ -125,6 +125,7 @@ struct f2fs_super_block {
 /*
  * For checkpoint
  */
+#define CP_RESIZEFS_FLAG		0x00004000
 #define CP_DISABLED_QUICK_FLAG		0x00002000
 #define CP_DISABLED_FLAG		0x00001000
 #define CP_QUOTA_NEED_FSCK_FLAG		0x00000800
diff --git a/include/linux/fanotify.h b/include/linux/fanotify.h
index b79fa9bb..3049a6c 100644
--- a/include/linux/fanotify.h
+++ b/include/linux/fanotify.h
@@ -47,7 +47,8 @@
  * Directory entry modification events - reported only to directory
  * where entry is modified and not to a watching parent.
  */
-#define FANOTIFY_DIRENT_EVENTS	(FAN_MOVE | FAN_CREATE | FAN_DELETE)
+#define FANOTIFY_DIRENT_EVENTS	(FAN_MOVE | FAN_CREATE | FAN_DELETE | \
+				 FAN_DIR_MODIFY)
 
 /* Events that can only be reported with data type FSNOTIFY_EVENT_INODE */
 #define FANOTIFY_INODE_EVENTS	(FANOTIFY_DIRENT_EVENTS | \
diff --git a/include/linux/firmware/imx/ipc.h b/include/linux/firmware/imx/ipc.h
index 6312c8c..8910574 100644
--- a/include/linux/firmware/imx/ipc.h
+++ b/include/linux/firmware/imx/ipc.h
@@ -25,7 +25,6 @@ enum imx_sc_rpc_svc {
 	IMX_SC_RPC_SVC_PAD = 6,
 	IMX_SC_RPC_SVC_MISC = 7,
 	IMX_SC_RPC_SVC_IRQ = 8,
-	IMX_SC_RPC_SVC_ABORT = 9
 };
 
 struct imx_sc_rpc_msg {
diff --git a/include/linux/firmware/meson/meson_sm.h b/include/linux/firmware/meson/meson_sm.h
index 6669e2a..95b0da2 100644
--- a/include/linux/firmware/meson/meson_sm.h
+++ b/include/linux/firmware/meson/meson_sm.h
@@ -12,6 +12,8 @@ enum {
 	SM_EFUSE_WRITE,
 	SM_EFUSE_USER_MAX,
 	SM_GET_CHIP_ID,
+	SM_A1_PWRC_SET,
+	SM_A1_PWRC_GET,
 };
 
 struct meson_sm_firmware;
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index a7a2391..8efa5ac 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -329,7 +329,7 @@ struct zynqmp_eemi_ops {
 int zynqmp_pm_invoke_fn(u32 pm_api_id, u32 arg0, u32 arg1,
 			u32 arg2, u32 arg3, u32 *ret_payload);
 
-#if IS_REACHABLE(CONFIG_ARCH_ZYNQMP)
+#if IS_REACHABLE(CONFIG_ZYNQMP_FIRMWARE)
 const struct zynqmp_eemi_ops *zynqmp_pm_get_eemi_ops(void);
 #else
 static inline struct zynqmp_eemi_ops *zynqmp_pm_get_eemi_ops(void)
diff --git a/include/linux/fs.h b/include/linux/fs.h
index f81c822..4f6f59b 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -3399,7 +3399,7 @@ static inline bool io_is_direct(struct file *filp)
 	return (filp->f_flags & O_DIRECT) || IS_DAX(filp->f_mapping->host);
 }
 
-static inline bool vma_is_dax(struct vm_area_struct *vma)
+static inline bool vma_is_dax(const struct vm_area_struct *vma)
 {
 	return vma->vm_file && IS_DAX(vma->vm_file->f_mapping->host);
 }
diff --git a/include/linux/fsnotify.h b/include/linux/fsnotify.h
index a2d5d17..5ab28f6 100644
--- a/include/linux/fsnotify.h
+++ b/include/linux/fsnotify.h
@@ -18,39 +18,63 @@
 #include <linux/bug.h>
 
 /*
- * Notify this @dir inode about a change in the directory entry @dentry.
+ * Notify this @dir inode about a change in a child directory entry.
+ * The directory entry may have turned positive or negative or its inode may
+ * have changed (i.e. renamed over).
  *
  * Unlike fsnotify_parent(), the event will be reported regardless of the
  * FS_EVENT_ON_CHILD mask on the parent inode.
  */
-static inline int fsnotify_dirent(struct inode *dir, struct dentry *dentry,
-				  __u32 mask)
+static inline void fsnotify_name(struct inode *dir, __u32 mask,
+				 struct inode *child,
+				 const struct qstr *name, u32 cookie)
 {
-	return fsnotify(dir, mask, d_inode(dentry), FSNOTIFY_EVENT_INODE,
-			&dentry->d_name, 0);
+	fsnotify(dir, mask, child, FSNOTIFY_EVENT_INODE, name, cookie);
+	/*
+	 * Send another flavor of the event without child inode data and
+	 * without the specific event type (e.g. FS_CREATE|FS_IS_DIR).
+	 * The name is relative to the dir inode the event is reported to.
+	 */
+	fsnotify(dir, FS_DIR_MODIFY, dir, FSNOTIFY_EVENT_INODE, name, 0);
 }
 
-/* Notify this dentry's parent about a child's events. */
-static inline int fsnotify_parent(const struct path *path,
-				  struct dentry *dentry, __u32 mask)
+static inline void fsnotify_dirent(struct inode *dir, struct dentry *dentry,
+				   __u32 mask)
 {
-	if (!dentry)
-		dentry = path->dentry;
-
-	return __fsnotify_parent(path, dentry, mask);
+	fsnotify_name(dir, mask, d_inode(dentry), &dentry->d_name, 0);
 }
 
 /*
- * Simple wrapper to consolidate calls fsnotify_parent()/fsnotify() when
- * an event is on a path.
+ * Simple wrappers to consolidate calls fsnotify_parent()/fsnotify() when
+ * an event is on a file/dentry.
  */
-static inline int fsnotify_path(struct inode *inode, const struct path *path,
-				__u32 mask)
+static inline void fsnotify_dentry(struct dentry *dentry, __u32 mask)
 {
-	int ret = fsnotify_parent(path, NULL, mask);
+	struct inode *inode = d_inode(dentry);
 
+	if (S_ISDIR(inode->i_mode))
+		mask |= FS_ISDIR;
+
+	fsnotify_parent(dentry, mask, inode, FSNOTIFY_EVENT_INODE);
+	fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE, NULL, 0);
+}
+
+static inline int fsnotify_file(struct file *file, __u32 mask)
+{
+	const struct path *path = &file->f_path;
+	struct inode *inode = file_inode(file);
+	int ret;
+
+	if (file->f_mode & FMODE_NONOTIFY)
+		return 0;
+
+	if (S_ISDIR(inode->i_mode))
+		mask |= FS_ISDIR;
+
+	ret = fsnotify_parent(path->dentry, mask, path, FSNOTIFY_EVENT_PATH);
 	if (ret)
 		return ret;
+
 	return fsnotify(inode, mask, path, FSNOTIFY_EVENT_PATH, NULL, 0);
 }
 
@@ -58,19 +82,16 @@ static inline int fsnotify_path(struct inode *inode, const struct path *path,
 static inline int fsnotify_perm(struct file *file, int mask)
 {
 	int ret;
-	const struct path *path = &file->f_path;
-	struct inode *inode = file_inode(file);
 	__u32 fsnotify_mask = 0;
 
-	if (file->f_mode & FMODE_NONOTIFY)
-		return 0;
 	if (!(mask & (MAY_READ | MAY_OPEN)))
 		return 0;
+
 	if (mask & MAY_OPEN) {
 		fsnotify_mask = FS_OPEN_PERM;
 
 		if (file->f_flags & __FMODE_EXEC) {
-			ret = fsnotify_path(inode, path, FS_OPEN_EXEC_PERM);
+			ret = fsnotify_file(file, FS_OPEN_EXEC_PERM);
 
 			if (ret)
 				return ret;
@@ -79,10 +100,7 @@ static inline int fsnotify_perm(struct file *file, int mask)
 		fsnotify_mask = FS_ACCESS_PERM;
 	}
 
-	if (S_ISDIR(inode->i_mode))
-		fsnotify_mask |= FS_ISDIR;
-
-	return fsnotify_path(inode, path, fsnotify_mask);
+	return fsnotify_file(file, fsnotify_mask);
 }
 
 /*
@@ -122,10 +140,8 @@ static inline void fsnotify_move(struct inode *old_dir, struct inode *new_dir,
 		mask |= FS_ISDIR;
 	}
 
-	fsnotify(old_dir, old_dir_mask, source, FSNOTIFY_EVENT_INODE, old_name,
-		 fs_cookie);
-	fsnotify(new_dir, new_dir_mask, source, FSNOTIFY_EVENT_INODE, new_name,
-		 fs_cookie);
+	fsnotify_name(old_dir, old_dir_mask, source, old_name, fs_cookie);
+	fsnotify_name(new_dir, new_dir_mask, source, new_name, fs_cookie);
 
 	if (target)
 		fsnotify_link_count(target);
@@ -180,12 +196,13 @@ static inline void fsnotify_create(struct inode *inode, struct dentry *dentry)
  * Note: We have to pass also the linked inode ptr as some filesystems leave
  *   new_dentry->d_inode NULL and instantiate inode pointer later
  */
-static inline void fsnotify_link(struct inode *dir, struct inode *inode, struct dentry *new_dentry)
+static inline void fsnotify_link(struct inode *dir, struct inode *inode,
+				 struct dentry *new_dentry)
 {
 	fsnotify_link_count(inode);
 	audit_inode_child(dir, new_dentry, AUDIT_TYPE_CHILD_CREATE);
 
-	fsnotify(dir, FS_CREATE, inode, FSNOTIFY_EVENT_INODE, &new_dentry->d_name, 0);
+	fsnotify_name(dir, FS_CREATE, inode, &new_dentry->d_name, 0);
 }
 
 /*
@@ -229,15 +246,7 @@ static inline void fsnotify_rmdir(struct inode *dir, struct dentry *dentry)
  */
 static inline void fsnotify_access(struct file *file)
 {
-	const struct path *path = &file->f_path;
-	struct inode *inode = file_inode(file);
-	__u32 mask = FS_ACCESS;
-
-	if (S_ISDIR(inode->i_mode))
-		mask |= FS_ISDIR;
-
-	if (!(file->f_mode & FMODE_NONOTIFY))
-		fsnotify_path(inode, path, mask);
+	fsnotify_file(file, FS_ACCESS);
 }
 
 /*
@@ -245,15 +254,7 @@ static inline void fsnotify_access(struct file *file)
  */
 static inline void fsnotify_modify(struct file *file)
 {
-	const struct path *path = &file->f_path;
-	struct inode *inode = file_inode(file);
-	__u32 mask = FS_MODIFY;
-
-	if (S_ISDIR(inode->i_mode))
-		mask |= FS_ISDIR;
-
-	if (!(file->f_mode & FMODE_NONOTIFY))
-		fsnotify_path(inode, path, mask);
+	fsnotify_file(file, FS_MODIFY);
 }
 
 /*
@@ -261,16 +262,12 @@ static inline void fsnotify_modify(struct file *file)
  */
 static inline void fsnotify_open(struct file *file)
 {
-	const struct path *path = &file->f_path;
-	struct inode *inode = file_inode(file);
 	__u32 mask = FS_OPEN;
 
-	if (S_ISDIR(inode->i_mode))
-		mask |= FS_ISDIR;
 	if (file->f_flags & __FMODE_EXEC)
 		mask |= FS_OPEN_EXEC;
 
-	fsnotify_path(inode, path, mask);
+	fsnotify_file(file, mask);
 }
 
 /*
@@ -278,16 +275,10 @@ static inline void fsnotify_open(struct file *file)
  */
 static inline void fsnotify_close(struct file *file)
 {
-	const struct path *path = &file->f_path;
-	struct inode *inode = file_inode(file);
-	fmode_t mode = file->f_mode;
-	__u32 mask = (mode & FMODE_WRITE) ? FS_CLOSE_WRITE : FS_CLOSE_NOWRITE;
+	__u32 mask = (file->f_mode & FMODE_WRITE) ? FS_CLOSE_WRITE :
+						    FS_CLOSE_NOWRITE;
 
-	if (S_ISDIR(inode->i_mode))
-		mask |= FS_ISDIR;
-
-	if (!(file->f_mode & FMODE_NONOTIFY))
-		fsnotify_path(inode, path, mask);
+	fsnotify_file(file, mask);
 }
 
 /*
@@ -295,14 +286,7 @@ static inline void fsnotify_close(struct file *file)
  */
 static inline void fsnotify_xattr(struct dentry *dentry)
 {
-	struct inode *inode = dentry->d_inode;
-	__u32 mask = FS_ATTRIB;
-
-	if (S_ISDIR(inode->i_mode))
-		mask |= FS_ISDIR;
-
-	fsnotify_parent(NULL, dentry, mask);
-	fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE, NULL, 0);
+	fsnotify_dentry(dentry, FS_ATTRIB);
 }
 
 /*
@@ -311,7 +295,6 @@ static inline void fsnotify_xattr(struct dentry *dentry)
  */
 static inline void fsnotify_change(struct dentry *dentry, unsigned int ia_valid)
 {
-	struct inode *inode = dentry->d_inode;
 	__u32 mask = 0;
 
 	if (ia_valid & ATTR_UID)
@@ -332,13 +315,8 @@ static inline void fsnotify_change(struct dentry *dentry, unsigned int ia_valid)
 	if (ia_valid & ATTR_MODE)
 		mask |= FS_ATTRIB;
 
-	if (mask) {
-		if (S_ISDIR(inode->i_mode))
-			mask |= FS_ISDIR;
-
-		fsnotify_parent(NULL, dentry, mask);
-		fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE, NULL, 0);
-	}
+	if (mask)
+		fsnotify_dentry(dentry, mask);
 }
 
 #endif	/* _LINUX_FS_NOTIFY_H */
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index 1915bdb..f0c5064 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -47,18 +47,18 @@
 #define FS_OPEN_PERM		0x00010000	/* open event in an permission hook */
 #define FS_ACCESS_PERM		0x00020000	/* access event in a permissions hook */
 #define FS_OPEN_EXEC_PERM	0x00040000	/* open/exec event in a permission hook */
+#define FS_DIR_MODIFY		0x00080000	/* Directory entry was modified */
 
 #define FS_EXCL_UNLINK		0x04000000	/* do not send events if object is unlinked */
-#define FS_ISDIR		0x40000000	/* event occurred against dir */
-#define FS_IN_ONESHOT		0x80000000	/* only send event once */
-
-#define FS_DN_RENAME		0x10000000	/* file renamed */
-#define FS_DN_MULTISHOT		0x20000000	/* dnotify multishot */
-
 /* This inode cares about things that happen to its children.  Always set for
  * dnotify and inotify. */
 #define FS_EVENT_ON_CHILD	0x08000000
 
+#define FS_DN_RENAME		0x10000000	/* file renamed */
+#define FS_DN_MULTISHOT		0x20000000	/* dnotify multishot */
+#define FS_ISDIR		0x40000000	/* event occurred against dir */
+#define FS_IN_ONESHOT		0x80000000	/* only send event once */
+
 #define FS_MOVE			(FS_MOVED_FROM | FS_MOVED_TO)
 
 /*
@@ -67,7 +67,8 @@
  * The watching parent may get an FS_ATTRIB|FS_EVENT_ON_CHILD event
  * when a directory entry inside a child subdir changes.
  */
-#define ALL_FSNOTIFY_DIRENT_EVENTS	(FS_CREATE | FS_DELETE | FS_MOVE)
+#define ALL_FSNOTIFY_DIRENT_EVENTS	(FS_CREATE | FS_DELETE | FS_MOVE | \
+					 FS_DIR_MODIFY)
 
 #define ALL_FSNOTIFY_PERM_EVENTS (FS_OPEN_PERM | FS_ACCESS_PERM | \
 				  FS_OPEN_EXEC_PERM)
@@ -133,8 +134,7 @@ struct fsnotify_ops {
  */
 struct fsnotify_event {
 	struct list_head list;
-	/* inode may ONLY be dereferenced during handle_event(). */
-	struct inode *inode;	/* either the inode the event happened to or its parent */
+	unsigned long objectid;	/* identifier for queue merges */
 };
 
 /*
@@ -213,10 +213,36 @@ struct fsnotify_group {
 	};
 };
 
-/* when calling fsnotify tell it if the data is a path or inode */
-#define FSNOTIFY_EVENT_NONE	0
-#define FSNOTIFY_EVENT_PATH	1
-#define FSNOTIFY_EVENT_INODE	2
+/* When calling fsnotify tell it if the data is a path or inode */
+enum fsnotify_data_type {
+	FSNOTIFY_EVENT_NONE,
+	FSNOTIFY_EVENT_PATH,
+	FSNOTIFY_EVENT_INODE,
+};
+
+static inline const struct inode *fsnotify_data_inode(const void *data,
+						      int data_type)
+{
+	switch (data_type) {
+	case FSNOTIFY_EVENT_INODE:
+		return data;
+	case FSNOTIFY_EVENT_PATH:
+		return d_inode(((const struct path *)data)->dentry);
+	default:
+		return NULL;
+	}
+}
+
+static inline const struct path *fsnotify_data_path(const void *data,
+						    int data_type)
+{
+	switch (data_type) {
+	case FSNOTIFY_EVENT_PATH:
+		return data;
+	default:
+		return NULL;
+	}
+}
 
 enum fsnotify_obj_type {
 	FSNOTIFY_OBJ_TYPE_INODE,
@@ -351,9 +377,10 @@ struct fsnotify_mark {
 /* called from the vfs helpers */
 
 /* main fsnotify call to send events */
-extern int fsnotify(struct inode *to_tell, __u32 mask, const void *data, int data_is,
-		    const struct qstr *name, u32 cookie);
-extern int __fsnotify_parent(const struct path *path, struct dentry *dentry, __u32 mask);
+extern int fsnotify(struct inode *to_tell, __u32 mask, const void *data,
+		    int data_type, const struct qstr *name, u32 cookie);
+extern int fsnotify_parent(struct dentry *dentry, __u32 mask, const void *data,
+			   int data_type);
 extern void __fsnotify_inode_delete(struct inode *inode);
 extern void __fsnotify_vfsmount_delete(struct vfsmount *mnt);
 extern void fsnotify_sb_delete(struct super_block *sb);
@@ -500,21 +527,22 @@ extern void fsnotify_finish_user_wait(struct fsnotify_iter_info *iter_info);
 extern bool fsnotify_prepare_user_wait(struct fsnotify_iter_info *iter_info);
 
 static inline void fsnotify_init_event(struct fsnotify_event *event,
-				       struct inode *inode)
+				       unsigned long objectid)
 {
 	INIT_LIST_HEAD(&event->list);
-	event->inode = inode;
+	event->objectid = objectid;
 }
 
 #else
 
-static inline int fsnotify(struct inode *to_tell, __u32 mask, const void *data, int data_is,
-			   const struct qstr *name, u32 cookie)
+static inline int fsnotify(struct inode *to_tell, __u32 mask, const void *data,
+			   int data_type, const struct qstr *name, u32 cookie)
 {
 	return 0;
 }
 
-static inline int __fsnotify_parent(const struct path *path, struct dentry *dentry, __u32 mask)
+static inline int fsnotify_parent(struct dentry *dentry, __u32 mask,
+				  const void *data, int data_type)
 {
 	return 0;
 }
diff --git a/include/linux/genalloc.h b/include/linux/genalloc.h
index 5b14a0f..0bd5810 100644
--- a/include/linux/genalloc.h
+++ b/include/linux/genalloc.h
@@ -76,7 +76,7 @@ struct gen_pool_chunk {
 	void *owner;			/* private data to retrieve at alloc time */
 	unsigned long start_addr;	/* start address of memory chunk */
 	unsigned long end_addr;		/* end address of memory chunk (inclusive) */
-	unsigned long bits[0];		/* bitmap for allocating memory chunk */
+	unsigned long bits[];		/* bitmap for allocating memory chunk */
 };
 
 /*
diff --git a/include/linux/gfp.h b/include/linux/gfp.h
index be27548..4aba4c8 100644
--- a/include/linux/gfp.h
+++ b/include/linux/gfp.h
@@ -124,6 +124,8 @@ struct vm_area_struct;
  *
  * Reclaim modifiers
  * ~~~~~~~~~~~~~~~~~
+ * Please note that all the following flags are only applicable to sleepable
+ * allocations (e.g. %GFP_NOWAIT and %GFP_ATOMIC will ignore them).
  *
  * %__GFP_IO can start physical IO.
  *
diff --git a/include/linux/gpio.h b/include/linux/gpio.h
index 2157717..008ad3e 100644
--- a/include/linux/gpio.h
+++ b/include/linux/gpio.h
@@ -102,11 +102,9 @@ void devm_gpio_free(struct device *dev, unsigned int gpio);
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/bug.h>
-#include <linux/pinctrl/pinctrl.h>
 
 struct device;
 struct gpio_chip;
-struct pinctrl_dev;
 
 static inline bool gpio_is_valid(int number)
 {
diff --git a/include/linux/gpio/consumer.h b/include/linux/gpio/consumer.h
index bf2d017..901aab8 100644
--- a/include/linux/gpio/consumer.h
+++ b/include/linux/gpio/consumer.h
@@ -2,9 +2,10 @@
 #ifndef __LINUX_GPIO_CONSUMER_H
 #define __LINUX_GPIO_CONSUMER_H
 
+#include <linux/bits.h>
 #include <linux/bug.h>
+#include <linux/compiler_types.h>
 #include <linux/err.h>
-#include <linux/kernel.h>
 
 struct device;
 
@@ -156,6 +157,7 @@ int gpiod_set_raw_array_value_cansleep(unsigned int array_size,
 				       struct gpio_array *array_info,
 				       unsigned long *value_bitmap);
 
+int gpiod_set_config(struct gpio_desc *desc, unsigned long config);
 int gpiod_set_debounce(struct gpio_desc *desc, unsigned debounce);
 int gpiod_set_transitory(struct gpio_desc *desc, bool transitory);
 void gpiod_toggle_active_low(struct gpio_desc *desc);
@@ -189,6 +191,8 @@ struct gpio_desc *devm_fwnode_gpiod_get_index(struct device *dev,
 
 #else /* CONFIG_GPIOLIB */
 
+#include <linux/kernel.h>
+
 static inline int gpiod_count(struct device *dev, const char *con_id)
 {
 	return 0;
@@ -470,6 +474,13 @@ static inline int gpiod_set_raw_array_value_cansleep(unsigned int array_size,
 	return 0;
 }
 
+static inline int gpiod_set_config(struct gpio_desc *desc, unsigned long config)
+{
+	/* GPIO can never have been requested */
+	WARN_ON(desc);
+	return -ENOSYS;
+}
+
 static inline int gpiod_set_debounce(struct gpio_desc *desc, unsigned debounce)
 {
 	/* GPIO can never have been requested */
diff --git a/include/linux/gpio/driver.h b/include/linux/gpio/driver.h
index 6ef05bc..b8fc92c 100644
--- a/include/linux/gpio/driver.h
+++ b/include/linux/gpio/driver.h
@@ -87,7 +87,7 @@ struct gpio_irq_chip {
 	 * @need_valid_mask to make these GPIO lines unavailable for
 	 * translation.
 	 */
-	int (*child_to_parent_hwirq)(struct gpio_chip *chip,
+	int (*child_to_parent_hwirq)(struct gpio_chip *gc,
 				     unsigned int child_hwirq,
 				     unsigned int child_type,
 				     unsigned int *parent_hwirq,
@@ -102,7 +102,7 @@ struct gpio_irq_chip {
 	 * variant named &gpiochip_populate_parent_fwspec_fourcell is also
 	 * available.
 	 */
-	void *(*populate_parent_alloc_arg)(struct gpio_chip *chip,
+	void *(*populate_parent_alloc_arg)(struct gpio_chip *gc,
 				       unsigned int parent_hwirq,
 				       unsigned int parent_type);
 
@@ -114,7 +114,7 @@ struct gpio_irq_chip {
 	 * callback. If this is not specified, then a default callback will be
 	 * provided that returns the line offset.
 	 */
-	unsigned int (*child_offset_to_irq)(struct gpio_chip *chip,
+	unsigned int (*child_offset_to_irq)(struct gpio_chip *gc,
 					    unsigned int pin);
 
 	/**
@@ -209,7 +209,7 @@ struct gpio_irq_chip {
 	 * a particular driver wants to clear IRQ related registers
 	 * in order to avoid undesired events.
 	 */
-	int (*init_hw)(struct gpio_chip *chip);
+	int (*init_hw)(struct gpio_chip *gc);
 
 	/**
 	 * @init_valid_mask: optional routine to initialize @valid_mask, to be
@@ -220,7 +220,7 @@ struct gpio_irq_chip {
 	 * then directly set some bits to "0" if they cannot be used for
 	 * interrupts.
 	 */
-	void (*init_valid_mask)(struct gpio_chip *chip,
+	void (*init_valid_mask)(struct gpio_chip *gc,
 				unsigned long *valid_mask,
 				unsigned int ngpios);
 
@@ -348,40 +348,40 @@ struct gpio_chip {
 	struct device		*parent;
 	struct module		*owner;
 
-	int			(*request)(struct gpio_chip *chip,
+	int			(*request)(struct gpio_chip *gc,
 						unsigned offset);
-	void			(*free)(struct gpio_chip *chip,
+	void			(*free)(struct gpio_chip *gc,
 						unsigned offset);
-	int			(*get_direction)(struct gpio_chip *chip,
+	int			(*get_direction)(struct gpio_chip *gc,
 						unsigned offset);
-	int			(*direction_input)(struct gpio_chip *chip,
+	int			(*direction_input)(struct gpio_chip *gc,
 						unsigned offset);
-	int			(*direction_output)(struct gpio_chip *chip,
+	int			(*direction_output)(struct gpio_chip *gc,
 						unsigned offset, int value);
-	int			(*get)(struct gpio_chip *chip,
+	int			(*get)(struct gpio_chip *gc,
 						unsigned offset);
-	int			(*get_multiple)(struct gpio_chip *chip,
+	int			(*get_multiple)(struct gpio_chip *gc,
 						unsigned long *mask,
 						unsigned long *bits);
-	void			(*set)(struct gpio_chip *chip,
+	void			(*set)(struct gpio_chip *gc,
 						unsigned offset, int value);
-	void			(*set_multiple)(struct gpio_chip *chip,
+	void			(*set_multiple)(struct gpio_chip *gc,
 						unsigned long *mask,
 						unsigned long *bits);
-	int			(*set_config)(struct gpio_chip *chip,
+	int			(*set_config)(struct gpio_chip *gc,
 					      unsigned offset,
 					      unsigned long config);
-	int			(*to_irq)(struct gpio_chip *chip,
+	int			(*to_irq)(struct gpio_chip *gc,
 						unsigned offset);
 
 	void			(*dbg_show)(struct seq_file *s,
-						struct gpio_chip *chip);
+						struct gpio_chip *gc);
 
-	int			(*init_valid_mask)(struct gpio_chip *chip,
+	int			(*init_valid_mask)(struct gpio_chip *gc,
 						   unsigned long *valid_mask,
 						   unsigned int ngpios);
 
-	int			(*add_pin_ranges)(struct gpio_chip *chip);
+	int			(*add_pin_ranges)(struct gpio_chip *gc);
 
 	int			base;
 	u16			ngpio;
@@ -458,11 +458,11 @@ struct gpio_chip {
 #endif /* CONFIG_OF_GPIO */
 };
 
-extern const char *gpiochip_is_requested(struct gpio_chip *chip,
+extern const char *gpiochip_is_requested(struct gpio_chip *gc,
 			unsigned offset);
 
 /* add/remove chips */
-extern int gpiochip_add_data_with_key(struct gpio_chip *chip, void *data,
+extern int gpiochip_add_data_with_key(struct gpio_chip *gc, void *data,
 				      struct lock_class_key *lock_key,
 				      struct lock_class_key *request_key);
 
@@ -490,43 +490,43 @@ extern int gpiochip_add_data_with_key(struct gpio_chip *chip, void *data,
  * Otherwise it returns zero as a success code.
  */
 #ifdef CONFIG_LOCKDEP
-#define gpiochip_add_data(chip, data) ({		\
+#define gpiochip_add_data(gc, data) ({		\
 		static struct lock_class_key lock_key;	\
 		static struct lock_class_key request_key;	  \
-		gpiochip_add_data_with_key(chip, data, &lock_key, \
+		gpiochip_add_data_with_key(gc, data, &lock_key, \
 					   &request_key);	  \
 	})
 #else
-#define gpiochip_add_data(chip, data) gpiochip_add_data_with_key(chip, data, NULL, NULL)
+#define gpiochip_add_data(gc, data) gpiochip_add_data_with_key(gc, data, NULL, NULL)
 #endif /* CONFIG_LOCKDEP */
 
-static inline int gpiochip_add(struct gpio_chip *chip)
+static inline int gpiochip_add(struct gpio_chip *gc)
 {
-	return gpiochip_add_data(chip, NULL);
+	return gpiochip_add_data(gc, NULL);
 }
-extern void gpiochip_remove(struct gpio_chip *chip);
-extern int devm_gpiochip_add_data(struct device *dev, struct gpio_chip *chip,
+extern void gpiochip_remove(struct gpio_chip *gc);
+extern int devm_gpiochip_add_data(struct device *dev, struct gpio_chip *gc,
 				  void *data);
 
 extern struct gpio_chip *gpiochip_find(void *data,
-			      int (*match)(struct gpio_chip *chip, void *data));
+			      int (*match)(struct gpio_chip *gc, void *data));
 
-bool gpiochip_line_is_irq(struct gpio_chip *chip, unsigned int offset);
-int gpiochip_reqres_irq(struct gpio_chip *chip, unsigned int offset);
-void gpiochip_relres_irq(struct gpio_chip *chip, unsigned int offset);
-void gpiochip_disable_irq(struct gpio_chip *chip, unsigned int offset);
-void gpiochip_enable_irq(struct gpio_chip *chip, unsigned int offset);
+bool gpiochip_line_is_irq(struct gpio_chip *gc, unsigned int offset);
+int gpiochip_reqres_irq(struct gpio_chip *gc, unsigned int offset);
+void gpiochip_relres_irq(struct gpio_chip *gc, unsigned int offset);
+void gpiochip_disable_irq(struct gpio_chip *gc, unsigned int offset);
+void gpiochip_enable_irq(struct gpio_chip *gc, unsigned int offset);
 
 /* Line status inquiry for drivers */
-bool gpiochip_line_is_open_drain(struct gpio_chip *chip, unsigned int offset);
-bool gpiochip_line_is_open_source(struct gpio_chip *chip, unsigned int offset);
+bool gpiochip_line_is_open_drain(struct gpio_chip *gc, unsigned int offset);
+bool gpiochip_line_is_open_source(struct gpio_chip *gc, unsigned int offset);
 
 /* Sleep persistence inquiry for drivers */
-bool gpiochip_line_is_persistent(struct gpio_chip *chip, unsigned int offset);
-bool gpiochip_line_is_valid(const struct gpio_chip *chip, unsigned int offset);
+bool gpiochip_line_is_persistent(struct gpio_chip *gc, unsigned int offset);
+bool gpiochip_line_is_valid(const struct gpio_chip *gc, unsigned int offset);
 
 /* get driver data */
-void *gpiochip_get_data(struct gpio_chip *chip);
+void *gpiochip_get_data(struct gpio_chip *gc);
 
 struct bgpio_pdata {
 	const char *label;
@@ -536,23 +536,23 @@ struct bgpio_pdata {
 
 #ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
 
-void *gpiochip_populate_parent_fwspec_twocell(struct gpio_chip *chip,
+void *gpiochip_populate_parent_fwspec_twocell(struct gpio_chip *gc,
 					     unsigned int parent_hwirq,
 					     unsigned int parent_type);
-void *gpiochip_populate_parent_fwspec_fourcell(struct gpio_chip *chip,
+void *gpiochip_populate_parent_fwspec_fourcell(struct gpio_chip *gc,
 					      unsigned int parent_hwirq,
 					      unsigned int parent_type);
 
 #else
 
-static inline void *gpiochip_populate_parent_fwspec_twocell(struct gpio_chip *chip,
+static inline void *gpiochip_populate_parent_fwspec_twocell(struct gpio_chip *gc,
 						    unsigned int parent_hwirq,
 						    unsigned int parent_type)
 {
 	return NULL;
 }
 
-static inline void *gpiochip_populate_parent_fwspec_fourcell(struct gpio_chip *chip,
+static inline void *gpiochip_populate_parent_fwspec_fourcell(struct gpio_chip *gc,
 						     unsigned int parent_hwirq,
 						     unsigned int parent_type)
 {
@@ -572,6 +572,7 @@ int bgpio_init(struct gpio_chip *gc, struct device *dev,
 #define BGPIOF_BIG_ENDIAN_BYTE_ORDER	BIT(3)
 #define BGPIOF_READ_OUTPUT_REG_SET	BIT(4) /* reg_set stores output value */
 #define BGPIOF_NO_OUTPUT		BIT(5) /* only input */
+#define BGPIOF_NO_SET_ON_INPUT		BIT(6)
 
 int gpiochip_irq_map(struct irq_domain *d, unsigned int irq,
 		     irq_hw_number_t hwirq);
@@ -582,11 +583,11 @@ int gpiochip_irq_domain_activate(struct irq_domain *domain,
 void gpiochip_irq_domain_deactivate(struct irq_domain *domain,
 				    struct irq_data *data);
 
-void gpiochip_set_nested_irqchip(struct gpio_chip *gpiochip,
+void gpiochip_set_nested_irqchip(struct gpio_chip *gc,
 		struct irq_chip *irqchip,
 		unsigned int parent_irq);
 
-int gpiochip_irqchip_add_key(struct gpio_chip *gpiochip,
+int gpiochip_irqchip_add_key(struct gpio_chip *gc,
 			     struct irq_chip *irqchip,
 			     unsigned int first_irq,
 			     irq_flow_handler_t handler,
@@ -595,7 +596,7 @@ int gpiochip_irqchip_add_key(struct gpio_chip *gpiochip,
 			     struct lock_class_key *lock_key,
 			     struct lock_class_key *request_key);
 
-bool gpiochip_irqchip_irq_valid(const struct gpio_chip *gpiochip,
+bool gpiochip_irqchip_irq_valid(const struct gpio_chip *gc,
 				unsigned int offset);
 
 #ifdef CONFIG_LOCKDEP
@@ -606,7 +607,7 @@ bool gpiochip_irqchip_irq_valid(const struct gpio_chip *gpiochip,
  * boilerplate static inlines provides such a key for each
  * unique instance.
  */
-static inline int gpiochip_irqchip_add(struct gpio_chip *gpiochip,
+static inline int gpiochip_irqchip_add(struct gpio_chip *gc,
 				       struct irq_chip *irqchip,
 				       unsigned int first_irq,
 				       irq_flow_handler_t handler,
@@ -615,12 +616,12 @@ static inline int gpiochip_irqchip_add(struct gpio_chip *gpiochip,
 	static struct lock_class_key lock_key;
 	static struct lock_class_key request_key;
 
-	return gpiochip_irqchip_add_key(gpiochip, irqchip, first_irq,
+	return gpiochip_irqchip_add_key(gc, irqchip, first_irq,
 					handler, type, false,
 					&lock_key, &request_key);
 }
 
-static inline int gpiochip_irqchip_add_nested(struct gpio_chip *gpiochip,
+static inline int gpiochip_irqchip_add_nested(struct gpio_chip *gc,
 			  struct irq_chip *irqchip,
 			  unsigned int first_irq,
 			  irq_flow_handler_t handler,
@@ -630,35 +631,35 @@ static inline int gpiochip_irqchip_add_nested(struct gpio_chip *gpiochip,
 	static struct lock_class_key lock_key;
 	static struct lock_class_key request_key;
 
-	return gpiochip_irqchip_add_key(gpiochip, irqchip, first_irq,
+	return gpiochip_irqchip_add_key(gc, irqchip, first_irq,
 					handler, type, true,
 					&lock_key, &request_key);
 }
 #else /* ! CONFIG_LOCKDEP */
-static inline int gpiochip_irqchip_add(struct gpio_chip *gpiochip,
+static inline int gpiochip_irqchip_add(struct gpio_chip *gc,
 				       struct irq_chip *irqchip,
 				       unsigned int first_irq,
 				       irq_flow_handler_t handler,
 				       unsigned int type)
 {
-	return gpiochip_irqchip_add_key(gpiochip, irqchip, first_irq,
+	return gpiochip_irqchip_add_key(gc, irqchip, first_irq,
 					handler, type, false, NULL, NULL);
 }
 
-static inline int gpiochip_irqchip_add_nested(struct gpio_chip *gpiochip,
+static inline int gpiochip_irqchip_add_nested(struct gpio_chip *gc,
 			  struct irq_chip *irqchip,
 			  unsigned int first_irq,
 			  irq_flow_handler_t handler,
 			  unsigned int type)
 {
-	return gpiochip_irqchip_add_key(gpiochip, irqchip, first_irq,
+	return gpiochip_irqchip_add_key(gc, irqchip, first_irq,
 					handler, type, true, NULL, NULL);
 }
 #endif /* CONFIG_LOCKDEP */
 
-int gpiochip_generic_request(struct gpio_chip *chip, unsigned offset);
-void gpiochip_generic_free(struct gpio_chip *chip, unsigned offset);
-int gpiochip_generic_config(struct gpio_chip *chip, unsigned offset,
+int gpiochip_generic_request(struct gpio_chip *gc, unsigned offset);
+void gpiochip_generic_free(struct gpio_chip *gc, unsigned offset);
+int gpiochip_generic_config(struct gpio_chip *gc, unsigned offset,
 			    unsigned long config);
 
 /**
@@ -675,25 +676,25 @@ struct gpio_pin_range {
 
 #ifdef CONFIG_PINCTRL
 
-int gpiochip_add_pin_range(struct gpio_chip *chip, const char *pinctl_name,
+int gpiochip_add_pin_range(struct gpio_chip *gc, const char *pinctl_name,
 			   unsigned int gpio_offset, unsigned int pin_offset,
 			   unsigned int npins);
-int gpiochip_add_pingroup_range(struct gpio_chip *chip,
+int gpiochip_add_pingroup_range(struct gpio_chip *gc,
 			struct pinctrl_dev *pctldev,
 			unsigned int gpio_offset, const char *pin_group);
-void gpiochip_remove_pin_ranges(struct gpio_chip *chip);
+void gpiochip_remove_pin_ranges(struct gpio_chip *gc);
 
 #else /* ! CONFIG_PINCTRL */
 
 static inline int
-gpiochip_add_pin_range(struct gpio_chip *chip, const char *pinctl_name,
+gpiochip_add_pin_range(struct gpio_chip *gc, const char *pinctl_name,
 		       unsigned int gpio_offset, unsigned int pin_offset,
 		       unsigned int npins)
 {
 	return 0;
 }
 static inline int
-gpiochip_add_pingroup_range(struct gpio_chip *chip,
+gpiochip_add_pingroup_range(struct gpio_chip *gc,
 			struct pinctrl_dev *pctldev,
 			unsigned int gpio_offset, const char *pin_group)
 {
@@ -701,27 +702,27 @@ gpiochip_add_pingroup_range(struct gpio_chip *chip,
 }
 
 static inline void
-gpiochip_remove_pin_ranges(struct gpio_chip *chip)
+gpiochip_remove_pin_ranges(struct gpio_chip *gc)
 {
 }
 
 #endif /* CONFIG_PINCTRL */
 
-struct gpio_desc *gpiochip_request_own_desc(struct gpio_chip *chip,
+struct gpio_desc *gpiochip_request_own_desc(struct gpio_chip *gc,
 					    unsigned int hwnum,
 					    const char *label,
 					    enum gpio_lookup_flags lflags,
 					    enum gpiod_flags dflags);
 void gpiochip_free_own_desc(struct gpio_desc *desc);
 
-void devprop_gpiochip_set_names(struct gpio_chip *chip,
+void devprop_gpiochip_set_names(struct gpio_chip *gc,
 				const struct fwnode_handle *fwnode);
 
 #ifdef CONFIG_GPIOLIB
 
 /* lock/unlock as IRQ */
-int gpiochip_lock_as_irq(struct gpio_chip *chip, unsigned int offset);
-void gpiochip_unlock_as_irq(struct gpio_chip *chip, unsigned int offset);
+int gpiochip_lock_as_irq(struct gpio_chip *gc, unsigned int offset);
+void gpiochip_unlock_as_irq(struct gpio_chip *gc, unsigned int offset);
 
 
 struct gpio_chip *gpiod_to_chip(const struct gpio_desc *desc);
@@ -735,14 +736,14 @@ static inline struct gpio_chip *gpiod_to_chip(const struct gpio_desc *desc)
 	return ERR_PTR(-ENODEV);
 }
 
-static inline int gpiochip_lock_as_irq(struct gpio_chip *chip,
+static inline int gpiochip_lock_as_irq(struct gpio_chip *gc,
 				       unsigned int offset)
 {
 	WARN_ON(1);
 	return -EINVAL;
 }
 
-static inline void gpiochip_unlock_as_irq(struct gpio_chip *chip,
+static inline void gpiochip_unlock_as_irq(struct gpio_chip *gc,
 					  unsigned int offset)
 {
 	WARN_ON(1);
diff --git a/include/linux/huge_mm.h b/include/linux/huge_mm.h
index 680a0d9..cfbb0a8 100644
--- a/include/linux/huge_mm.h
+++ b/include/linux/huge_mm.h
@@ -46,9 +46,46 @@ extern bool move_huge_pmd(struct vm_area_struct *vma, unsigned long old_addr,
 			 pmd_t *old_pmd, pmd_t *new_pmd);
 extern int change_huge_pmd(struct vm_area_struct *vma, pmd_t *pmd,
 			unsigned long addr, pgprot_t newprot,
-			int prot_numa);
-vm_fault_t vmf_insert_pfn_pmd(struct vm_fault *vmf, pfn_t pfn, bool write);
-vm_fault_t vmf_insert_pfn_pud(struct vm_fault *vmf, pfn_t pfn, bool write);
+			unsigned long cp_flags);
+vm_fault_t vmf_insert_pfn_pmd_prot(struct vm_fault *vmf, pfn_t pfn,
+				   pgprot_t pgprot, bool write);
+
+/**
+ * vmf_insert_pfn_pmd - insert a pmd size pfn
+ * @vmf: Structure describing the fault
+ * @pfn: pfn to insert
+ * @pgprot: page protection to use
+ * @write: whether it's a write fault
+ *
+ * Insert a pmd size pfn. See vmf_insert_pfn() for additional info.
+ *
+ * Return: vm_fault_t value.
+ */
+static inline vm_fault_t vmf_insert_pfn_pmd(struct vm_fault *vmf, pfn_t pfn,
+					    bool write)
+{
+	return vmf_insert_pfn_pmd_prot(vmf, pfn, vmf->vma->vm_page_prot, write);
+}
+vm_fault_t vmf_insert_pfn_pud_prot(struct vm_fault *vmf, pfn_t pfn,
+				   pgprot_t pgprot, bool write);
+
+/**
+ * vmf_insert_pfn_pud - insert a pud size pfn
+ * @vmf: Structure describing the fault
+ * @pfn: pfn to insert
+ * @pgprot: page protection to use
+ * @write: whether it's a write fault
+ *
+ * Insert a pud size pfn. See vmf_insert_pfn() for additional info.
+ *
+ * Return: vm_fault_t value.
+ */
+static inline vm_fault_t vmf_insert_pfn_pud(struct vm_fault *vmf, pfn_t pfn,
+					    bool write)
+{
+	return vmf_insert_pfn_pud_prot(vmf, pfn, vmf->vma->vm_page_prot, write);
+}
+
 enum transparent_hugepage_flag {
 	TRANSPARENT_HUGEPAGE_FLAG,
 	TRANSPARENT_HUGEPAGE_REQ_MADV_FLAG,
diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h
index 5ea0587..43a1cef 100644
--- a/include/linux/hugetlb.h
+++ b/include/linux/hugetlb.h
@@ -895,4 +895,16 @@ static inline spinlock_t *huge_pte_lock(struct hstate *h,
 	return ptl;
 }
 
+#if defined(CONFIG_HUGETLB_PAGE) && defined(CONFIG_CMA)
+extern void __init hugetlb_cma_reserve(int order);
+extern void __init hugetlb_cma_check(void);
+#else
+static inline __init void hugetlb_cma_reserve(int order)
+{
+}
+static inline __init void hugetlb_cma_check(void)
+{
+}
+#endif
+
 #endif /* _LINUX_HUGETLB_H */
diff --git a/include/linux/i2c-smbus.h b/include/linux/i2c-smbus.h
index 585ad6f..8c54590 100644
--- a/include/linux/i2c-smbus.h
+++ b/include/linux/i2c-smbus.h
@@ -15,24 +15,19 @@
 
 /**
  * i2c_smbus_alert_setup - platform data for the smbus_alert i2c client
- * @alert_edge_triggered: whether the alert interrupt is edge (1) or level (0)
- *		triggered
  * @irq: IRQ number, if the smbus_alert driver should take care of interrupt
  *		handling
  *
  * If irq is not specified, the smbus_alert driver doesn't take care of
  * interrupt handling. In that case it is up to the I2C bus driver to either
  * handle the interrupts or to poll for alerts.
- *
- * If irq is specified then it it crucial that alert_edge_triggered is
- * properly set.
  */
 struct i2c_smbus_alert_setup {
 	int			irq;
 };
 
-struct i2c_client *i2c_setup_smbus_alert(struct i2c_adapter *adapter,
-					 struct i2c_smbus_alert_setup *setup);
+struct i2c_client *i2c_new_smbus_alert_device(struct i2c_adapter *adapter,
+					      struct i2c_smbus_alert_setup *setup);
 int i2c_handle_smbus_alert(struct i2c_client *ara);
 
 #if IS_ENABLED(CONFIG_I2C_SMBUS) && IS_ENABLED(CONFIG_OF)
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index f6b9421..45d36ba 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -39,6 +39,14 @@ enum i2c_slave_event;
 typedef int (*i2c_slave_cb_t)(struct i2c_client *client,
 			      enum i2c_slave_event event, u8 *val);
 
+/* I2C Frequency Modes */
+#define I2C_MAX_STANDARD_MODE_FREQ	100000
+#define I2C_MAX_FAST_MODE_FREQ		400000
+#define I2C_MAX_FAST_MODE_PLUS_FREQ	1000000
+#define I2C_MAX_TURBO_MODE_FREQ		1400000
+#define I2C_MAX_HIGH_SPEED_MODE_FREQ	3400000
+#define I2C_MAX_ULTRA_FAST_MODE_FREQ	5000000
+
 struct module;
 struct property_entry;
 
@@ -453,12 +461,6 @@ i2c_new_scanned_device(struct i2c_adapter *adap,
 		       unsigned short const *addr_list,
 		       int (*probe)(struct i2c_adapter *adap, unsigned short addr));
 
-struct i2c_client *
-i2c_new_probed_device(struct i2c_adapter *adap,
-		       struct i2c_board_info *info,
-		       unsigned short const *addr_list,
-		       int (*probe)(struct i2c_adapter *adap, unsigned short addr));
-
 /* Common custom probe functions */
 int i2c_probe_func_quick_read(struct i2c_adapter *adap, unsigned short addr);
 
diff --git a/include/linux/igmp.h b/include/linux/igmp.h
index 463047d..faa6586 100644
--- a/include/linux/igmp.h
+++ b/include/linux/igmp.h
@@ -38,7 +38,7 @@ struct ip_sf_socklist {
 	unsigned int		sl_max;
 	unsigned int		sl_count;
 	struct rcu_head		rcu;
-	__be32			sl_addr[0];
+	__be32			sl_addr[];
 };
 
 #define IP_SFLSIZE(count)	(sizeof(struct ip_sf_socklist) + \
diff --git a/include/linux/ihex.h b/include/linux/ihex.h
index 98cb5ce..b824877 100644
--- a/include/linux/ihex.h
+++ b/include/linux/ihex.h
@@ -18,7 +18,7 @@
 struct ihex_binrec {
 	__be32 addr;
 	__be16 len;
-	uint8_t data[0];
+	uint8_t data[];
 } __attribute__((packed));
 
 static inline uint16_t ihex_binrec_size(const struct ihex_binrec *p)
diff --git a/include/linux/iio/common/cros_ec_sensors_core.h b/include/linux/iio/common/cros_ec_sensors_core.h
index bb331e6..7bc961d 100644
--- a/include/linux/iio/common/cros_ec_sensors_core.h
+++ b/include/linux/iio/common/cros_ec_sensors_core.h
@@ -12,6 +12,7 @@
 #include <linux/irqreturn.h>
 #include <linux/platform_data/cros_ec_commands.h>
 #include <linux/platform_data/cros_ec_proto.h>
+#include <linux/platform_data/cros_ec_sensorhub.h>
 
 enum {
 	CROS_EC_SENSOR_X,
@@ -29,8 +30,7 @@ enum {
  */
 #define CROS_EC_SAMPLE_SIZE  (sizeof(s64) * 2)
 
-/* Minimum sampling period to use when device is suspending */
-#define CROS_EC_MIN_SUSPEND_SAMPLING_FREQUENCY 1000  /* 1 second */
+typedef irqreturn_t (*cros_ec_sensors_capture_t)(int irq, void *p);
 
 /**
  * struct cros_ec_sensors_core_state - state data for EC sensors IIO driver
@@ -50,7 +50,9 @@ enum {
  *				the timestamp. The timestamp is always last and
  *				is always 8-byte aligned.
  * @read_ec_sensors_data:	function used for accessing sensors values
- * @cuur_sampl_freq:		current sampling period
+ * @fifo_max_event_count:	Size of the EC sensor FIFO
+ * @frequencies:		Table of known available frequencies:
+ *				0, Min and Max in mHz
  */
 struct cros_ec_sensors_core_state {
 	struct cros_ec_device *ec;
@@ -73,101 +75,34 @@ struct cros_ec_sensors_core_state {
 	int (*read_ec_sensors_data)(struct iio_dev *indio_dev,
 				    unsigned long scan_mask, s16 *data);
 
-	int curr_sampl_freq;
-
-	/* Table of known available frequencies : 0, Min and Max in mHz */
-	int frequencies[3];
+	u32 fifo_max_event_count;
+	int frequencies[6];
 };
 
-/**
- * cros_ec_sensors_read_lpc() - retrieve data from EC shared memory
- * @indio_dev:	pointer to IIO device
- * @scan_mask:	bitmap of the sensor indices to scan
- * @data:	location to store data
- *
- * This is the safe function for reading the EC data. It guarantees that the
- * data sampled was not modified by the EC while being read.
- *
- * Return: 0 on success, -errno on failure.
- */
 int cros_ec_sensors_read_lpc(struct iio_dev *indio_dev, unsigned long scan_mask,
 			     s16 *data);
 
-/**
- * cros_ec_sensors_read_cmd() - retrieve data using the EC command protocol
- * @indio_dev:	pointer to IIO device
- * @scan_mask:	bitmap of the sensor indices to scan
- * @data:	location to store data
- *
- * Return: 0 on success, -errno on failure.
- */
 int cros_ec_sensors_read_cmd(struct iio_dev *indio_dev, unsigned long scan_mask,
 			     s16 *data);
 
 struct platform_device;
-/**
- * cros_ec_sensors_core_init() - basic initialization of the core structure
- * @pdev:		platform device created for the sensors
- * @indio_dev:		iio device structure of the device
- * @physical_device:	true if the device refers to a physical device
- *
- * Return: 0 on success, -errno on failure.
- */
 int cros_ec_sensors_core_init(struct platform_device *pdev,
-			      struct iio_dev *indio_dev, bool physical_device);
+			      struct iio_dev *indio_dev, bool physical_device,
+			      cros_ec_sensors_capture_t trigger_capture,
+			      cros_ec_sensorhub_push_data_cb_t push_data);
 
-/**
- * cros_ec_sensors_capture() - the trigger handler function
- * @irq:	the interrupt number.
- * @p:		a pointer to the poll function.
- *
- * On a trigger event occurring, if the pollfunc is attached then this
- * handler is called as a threaded interrupt (and hence may sleep). It
- * is responsible for grabbing data from the device and pushing it into
- * the associated buffer.
- *
- * Return: IRQ_HANDLED
- */
 irqreturn_t cros_ec_sensors_capture(int irq, void *p);
+int cros_ec_sensors_push_data(struct iio_dev *indio_dev,
+			      s16 *data,
+			      s64 timestamp);
 
-/**
- * cros_ec_motion_send_host_cmd() - send motion sense host command
- * @st:		pointer to state information for device
- * @opt_length:	optional length to reduce the response size, useful on the data
- *		path. Otherwise, the maximal allowed response size is used
- *
- * When called, the sub-command is assumed to be set in param->cmd.
- *
- * Return: 0 on success, -errno on failure.
- */
 int cros_ec_motion_send_host_cmd(struct cros_ec_sensors_core_state *st,
 				 u16 opt_length);
 
-/**
- * cros_ec_sensors_core_read() - function to request a value from the sensor
- * @st:		pointer to state information for device
- * @chan:	channel specification structure table
- * @val:	will contain one element making up the returned value
- * @val2:	will contain another element making up the returned value
- * @mask:	specifies which values to be requested
- *
- * Return:	the type of value returned by the device
- */
 int cros_ec_sensors_core_read(struct cros_ec_sensors_core_state *st,
 			      struct iio_chan_spec const *chan,
 			      int *val, int *val2, long mask);
 
-/**
- * cros_ec_sensors_core_read_avail() - get available values
- * @indio_dev:		pointer to state information for device
- * @chan:	channel specification structure table
- * @vals:	list of available values
- * @type:	type of data returned
- * @length:	number of data returned in the array
- * @mask:	specifies which values to be requested
- *
- * Return:	an error code, IIO_AVAIL_RANGE or IIO_AVAIL_LIST
- */
 int cros_ec_sensors_core_read_avail(struct iio_dev *indio_dev,
 				    struct iio_chan_spec const *chan,
 				    const int **vals,
@@ -175,23 +110,12 @@ int cros_ec_sensors_core_read_avail(struct iio_dev *indio_dev,
 				    int *length,
 				    long mask);
 
-/**
- * cros_ec_sensors_core_write() - function to write a value to the sensor
- * @st:		pointer to state information for device
- * @chan:	channel specification structure table
- * @val:	first part of value to write
- * @val2:	second part of value to write
- * @mask:	specifies which values to write
- *
- * Return:	the type of value returned by the device
- */
 int cros_ec_sensors_core_write(struct cros_ec_sensors_core_state *st,
 			       struct iio_chan_spec const *chan,
 			       int val, int val2, long mask);
 
-extern const struct dev_pm_ops cros_ec_sensors_pm_ops;
-
 /* List of extended channel specification for all sensors */
 extern const struct iio_chan_spec_ext_info cros_ec_sensors_ext_info[];
+extern const struct attribute *cros_ec_sensor_fifo_attributes[];
 
 #endif  /* __CROS_EC_SENSORS_CORE_H */
diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h
index eed58ed..17f56a0 100644
--- a/include/linux/iio/iio.h
+++ b/include/linux/iio/iio.h
@@ -629,6 +629,8 @@ static inline clockid_t iio_device_get_clock(const struct iio_dev *indio_dev)
 	return indio_dev->clock_id;
 }
 
+int iio_device_set_clock(struct iio_dev *indio_dev, clockid_t clock_id);
+
 /**
  * dev_to_iio_dev() - Get IIO device struct from a device struct
  * @dev: 		The device embedded in the IIO device
diff --git a/include/linux/io.h b/include/linux/io.h
index b1c44bb..8394c56 100644
--- a/include/linux/io.h
+++ b/include/linux/io.h
@@ -77,8 +77,6 @@ void *devm_memremap(struct device *dev, resource_size_t offset,
 		size_t size, unsigned long flags);
 void devm_memunmap(struct device *dev, void *addr);
 
-void *__devm_memremap_pages(struct device *dev, struct resource *res);
-
 #ifdef CONFIG_PCI
 /*
  * The PCI specifications (Rev 3.0, 3.2.5 "Transaction Ordering and
diff --git a/include/linux/iommu.h b/include/linux/iommu.h
index d1b5f4d..7ef8b0b 100644
--- a/include/linux/iommu.h
+++ b/include/linux/iommu.h
@@ -365,17 +365,20 @@ struct iommu_fault_param {
 };
 
 /**
- * struct iommu_param - collection of per-device IOMMU data
+ * struct dev_iommu - Collection of per-device IOMMU data
  *
  * @fault_param: IOMMU detected device fault reporting data
+ * @fwspec:	 IOMMU fwspec data
+ * @priv:	 IOMMU Driver private data
  *
  * TODO: migrate other per device data pointers under iommu_dev_data, e.g.
  *	struct iommu_group	*iommu_group;
- *	struct iommu_fwspec	*iommu_fwspec;
  */
-struct iommu_param {
+struct dev_iommu {
 	struct mutex lock;
-	struct iommu_fault_param *fault_param;
+	struct iommu_fault_param	*fault_param;
+	struct iommu_fwspec		*fwspec;
+	void				*priv;
 };
 
 int  iommu_device_register(struct iommu_device *iommu);
@@ -588,11 +591,10 @@ struct iommu_group *fsl_mc_device_group(struct device *dev);
 struct iommu_fwspec {
 	const struct iommu_ops	*ops;
 	struct fwnode_handle	*iommu_fwnode;
-	void			*iommu_priv;
 	u32			flags;
 	u32			num_pasid_bits;
 	unsigned int		num_ids;
-	u32			ids[1];
+	u32			ids[];
 };
 
 /* ATS is supported */
@@ -614,13 +616,26 @@ const struct iommu_ops *iommu_ops_from_fwnode(struct fwnode_handle *fwnode);
 
 static inline struct iommu_fwspec *dev_iommu_fwspec_get(struct device *dev)
 {
-	return dev->iommu_fwspec;
+	if (dev->iommu)
+		return dev->iommu->fwspec;
+	else
+		return NULL;
 }
 
 static inline void dev_iommu_fwspec_set(struct device *dev,
 					struct iommu_fwspec *fwspec)
 {
-	dev->iommu_fwspec = fwspec;
+	dev->iommu->fwspec = fwspec;
+}
+
+static inline void *dev_iommu_priv_get(struct device *dev)
+{
+	return dev->iommu->priv;
+}
+
+static inline void dev_iommu_priv_set(struct device *dev, void *priv)
+{
+	dev->iommu->priv = priv;
 }
 
 int iommu_probe_device(struct device *dev);
@@ -1073,6 +1088,10 @@ static inline int iommu_sva_unbind_gpasid(struct iommu_domain *domain,
 	return -ENODEV;
 }
 
+static inline struct iommu_fwspec *dev_iommu_fwspec_get(struct device *dev)
+{
+	return NULL;
+}
 #endif /* CONFIG_IOMMU_API */
 
 #ifdef CONFIG_IOMMU_DEBUGFS
diff --git a/include/linux/irq.h b/include/linux/irq.h
index 9315fbb..8d5bc2c 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -573,8 +573,6 @@ enum {
 #define IRQ_DEFAULT_INIT_FLAGS	ARCH_IRQ_INIT_FLAGS
 
 struct irqaction;
-extern int setup_irq(unsigned int irq, struct irqaction *new);
-extern void remove_irq(unsigned int irq, struct irqaction *act);
 extern int setup_percpu_irq(unsigned int irq, struct irqaction *new);
 extern void remove_percpu_irq(unsigned int irq, struct irqaction *act);
 
@@ -1043,7 +1041,7 @@ struct irq_chip_generic {
 	unsigned long		unused;
 	struct irq_domain	*domain;
 	struct list_head	list;
-	struct irq_chip_type	chip_types[0];
+	struct irq_chip_type	chip_types[];
 };
 
 /**
@@ -1079,7 +1077,7 @@ struct irq_domain_chip_generic {
 	unsigned int		irq_flags_to_clear;
 	unsigned int		irq_flags_to_set;
 	enum irq_gc_flags	gc_flags;
-	struct irq_chip_generic	*gc[0];
+	struct irq_chip_generic	*gc[];
 };
 
 /* Generic chip callback functions */
diff --git a/include/linux/irqchip/arm-gic-v3.h b/include/linux/irqchip/arm-gic-v3.h
index 765d9b7..6c36b6c 100644
--- a/include/linux/irqchip/arm-gic-v3.h
+++ b/include/linux/irqchip/arm-gic-v3.h
@@ -243,6 +243,7 @@
 
 #define GICR_TYPER_PLPIS		(1U << 0)
 #define GICR_TYPER_VLPIS		(1U << 1)
+#define GICR_TYPER_DIRTY		(1U << 2)
 #define GICR_TYPER_DirectLPIS		(1U << 3)
 #define GICR_TYPER_LAST			(1U << 4)
 #define GICR_TYPER_RVPEID		(1U << 7)
@@ -686,6 +687,7 @@ struct rdists {
 	bool			has_vlpis;
 	bool			has_rvpeid;
 	bool			has_direct_lpi;
+	bool			has_vpend_valid_dirty;
 };
 
 struct irq_domain;
diff --git a/include/linux/irqflags.h b/include/linux/irqflags.h
index ceca42d..61a9ced 100644
--- a/include/linux/irqflags.h
+++ b/include/linux/irqflags.h
@@ -58,16 +58,21 @@ do {						\
 } while (0)
 
 # define lockdep_hrtimer_enter(__hrtimer)		\
-	  do {						\
-		  if (!__hrtimer->is_hard)		\
-			current->irq_config = 1;	\
-	  } while (0)
+({							\
+	bool __expires_hardirq = true;			\
+							\
+	if (!__hrtimer->is_hard) {			\
+		current->irq_config = 1;		\
+		__expires_hardirq = false;		\
+	}						\
+	__expires_hardirq;				\
+})
 
-# define lockdep_hrtimer_exit(__hrtimer)		\
-	  do {						\
-		  if (!__hrtimer->is_hard)		\
+# define lockdep_hrtimer_exit(__expires_hardirq)	\
+	do {						\
+		if (!__expires_hardirq)			\
 			current->irq_config = 0;	\
-	  } while (0)
+	} while (0)
 
 # define lockdep_posixtimer_enter()				\
 	  do {							\
@@ -102,8 +107,8 @@ do {						\
 # define lockdep_hardirq_exit()		do { } while (0)
 # define lockdep_softirq_enter()	do { } while (0)
 # define lockdep_softirq_exit()		do { } while (0)
-# define lockdep_hrtimer_enter(__hrtimer)		do { } while (0)
-# define lockdep_hrtimer_exit(__hrtimer)		do { } while (0)
+# define lockdep_hrtimer_enter(__hrtimer)	false
+# define lockdep_hrtimer_exit(__context)	do { } while (0)
 # define lockdep_posixtimer_enter()		do { } while (0)
 # define lockdep_posixtimer_exit()		do { } while (0)
 # define lockdep_irq_work_enter(__work)		do { } while (0)
diff --git a/include/linux/kernfs.h b/include/linux/kernfs.h
index dded2e5..89f6a42 100644
--- a/include/linux/kernfs.h
+++ b/include/linux/kernfs.h
@@ -37,8 +37,10 @@ enum kernfs_node_type {
 	KERNFS_LINK		= 0x0004,
 };
 
-#define KERNFS_TYPE_MASK	0x000f
-#define KERNFS_FLAG_MASK	~KERNFS_TYPE_MASK
+#define KERNFS_TYPE_MASK		0x000f
+#define KERNFS_FLAG_MASK		~KERNFS_TYPE_MASK
+#define KERNFS_MAX_USER_XATTRS		128
+#define KERNFS_USER_XATTR_SIZE_LIMIT	(128 << 10)
 
 enum kernfs_node_flag {
 	KERNFS_ACTIVATED	= 0x0010,
@@ -78,6 +80,11 @@ enum kernfs_root_flag {
 	 * fhandle to access nodes of the fs.
 	 */
 	KERNFS_ROOT_SUPPORT_EXPORTOP		= 0x0004,
+
+	/*
+	 * Support user xattrs to be written to nodes rooted at this root.
+	 */
+	KERNFS_ROOT_SUPPORT_USER_XATTR		= 0x0008,
 };
 
 /* type-specific structures for kernfs_node union members */
diff --git a/include/linux/key-type.h b/include/linux/key-type.h
index 4ded94b..2ab2d6d 100644
--- a/include/linux/key-type.h
+++ b/include/linux/key-type.h
@@ -127,7 +127,7 @@ struct key_type {
 	 *   much is copied into the buffer
 	 * - shouldn't do the copy if the buffer is NULL
 	 */
-	long (*read)(const struct key *key, char __user *buffer, size_t buflen);
+	long (*read)(const struct key *key, char *buffer, size_t buflen);
 
 	/* handle request_key() for this type instead of invoking
 	 * /sbin/request-key (optional)
diff --git a/include/linux/kfifo.h b/include/linux/kfifo.h
index fc4b0b1..8624947 100644
--- a/include/linux/kfifo.h
+++ b/include/linux/kfifo.h
@@ -247,6 +247,37 @@ __kfifo_int_must_check_helper(int val)
 })
 
 /**
+ * kfifo_is_empty_spinlocked - returns true if the fifo is empty using
+ * a spinlock for locking
+ * @fifo: address of the fifo to be used
+ * @lock: spinlock to be used for locking
+ */
+#define kfifo_is_empty_spinlocked(fifo, lock) \
+({ \
+	unsigned long __flags; \
+	bool __ret; \
+	spin_lock_irqsave(lock, __flags); \
+	__ret = kfifo_is_empty(fifo); \
+	spin_unlock_irqrestore(lock, __flags); \
+	__ret; \
+})
+
+/**
+ * kfifo_is_empty_spinlocked_noirqsave  - returns true if the fifo is empty
+ * using a spinlock for locking, doesn't disable interrupts
+ * @fifo: address of the fifo to be used
+ * @lock: spinlock to be used for locking
+ */
+#define kfifo_is_empty_spinlocked_noirqsave(fifo, lock) \
+({ \
+	bool __ret; \
+	spin_lock(lock); \
+	__ret = kfifo_is_empty(fifo); \
+	spin_unlock(lock); \
+	__ret; \
+})
+
+/**
  * kfifo_is_full - returns true if the fifo is full
  * @fifo: address of the fifo to be used
  */
@@ -517,6 +548,26 @@ __kfifo_uint_must_check_helper( \
 	__ret; \
 })
 
+/**
+ * kfifo_in_spinlocked_noirqsave - put data into fifo using a spinlock for
+ * locking, don't disable interrupts
+ * @fifo: address of the fifo to be used
+ * @buf: the data to be added
+ * @n: number of elements to be added
+ * @lock: pointer to the spinlock to use for locking
+ *
+ * This is a variant of kfifo_in_spinlocked() but uses spin_lock/unlock()
+ * for locking and doesn't disable interrupts.
+ */
+#define kfifo_in_spinlocked_noirqsave(fifo, buf, n, lock) \
+({ \
+	unsigned int __ret; \
+	spin_lock(lock); \
+	__ret = kfifo_in(fifo, buf, n); \
+	spin_unlock(lock); \
+	__ret; \
+})
+
 /* alias for kfifo_in_spinlocked, will be removed in a future release */
 #define kfifo_in_locked(fifo, buf, n, lock) \
 		kfifo_in_spinlocked(fifo, buf, n, lock)
@@ -569,6 +620,28 @@ __kfifo_uint_must_check_helper( \
 }) \
 )
 
+/**
+ * kfifo_out_spinlocked_noirqsave - get data from the fifo using a spinlock
+ * for locking, don't disable interrupts
+ * @fifo: address of the fifo to be used
+ * @buf: pointer to the storage buffer
+ * @n: max. number of elements to get
+ * @lock: pointer to the spinlock to use for locking
+ *
+ * This is a variant of kfifo_out_spinlocked() which uses spin_lock/unlock()
+ * for locking and doesn't disable interrupts.
+ */
+#define kfifo_out_spinlocked_noirqsave(fifo, buf, n, lock) \
+__kfifo_uint_must_check_helper( \
+({ \
+	unsigned int __ret; \
+	spin_lock(lock); \
+	__ret = kfifo_out(fifo, buf, n); \
+	spin_unlock(lock); \
+	__ret; \
+}) \
+)
+
 /* alias for kfifo_out_spinlocked, will be removed in a future release */
 #define kfifo_out_locked(fifo, buf, n, lock) \
 		kfifo_out_spinlocked(fifo, buf, n, lock)
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index 6d58beb..01276e3 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -1048,7 +1048,7 @@ search_memslots(struct kvm_memslots *slots, gfn_t gfn)
 			start = slot + 1;
 	}
 
-	if (gfn >= memslots[start].base_gfn &&
+	if (start < slots->used_slots && gfn >= memslots[start].base_gfn &&
 	    gfn < memslots[start].base_gfn + memslots[start].npages) {
 		atomic_set(&slots->lru_slot, start);
 		return &memslots[start];
diff --git a/include/linux/leds.h b/include/linux/leds.h
index 75353e5..2451962 100644
--- a/include/linux/leds.h
+++ b/include/linux/leds.h
@@ -25,6 +25,7 @@ struct device_node;
  * LED Core
  */
 
+/* This is obsolete/useless. We now support variable maximum brightness. */
 enum led_brightness {
 	LED_OFF		= 0,
 	LED_ON		= 1,
diff --git a/include/linux/leds_pwm.h b/include/linux/leds_pwm.h
deleted file mode 100644
index 93d101d..0000000
--- a/include/linux/leds_pwm.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * PWM LED driver data - see drivers/leds/leds-pwm.c
- */
-#ifndef __LINUX_LEDS_PWM_H
-#define __LINUX_LEDS_PWM_H
-
-struct led_pwm {
-	const char	*name;
-	const char	*default_trigger;
-	unsigned	pwm_id __deprecated;
-	u8 		active_low;
-	unsigned 	max_brightness;
-	unsigned	pwm_period_ns;
-};
-
-struct led_pwm_platform_data {
-	int			num_leds;
-	struct led_pwm	*leds;
-};
-
-#endif
diff --git a/include/linux/libnvdimm.h b/include/linux/libnvdimm.h
index 9df091b..18da405 100644
--- a/include/linux/libnvdimm.h
+++ b/include/linux/libnvdimm.h
@@ -37,6 +37,8 @@ enum {
 	NDD_WORK_PENDING = 4,
 	/* ignore / filter NSLABEL_FLAG_LOCAL for this DIMM, i.e. no aliasing */
 	NDD_NOBLK = 5,
+	/* dimm supports namespace labels */
+	NDD_LABELING = 6,
 
 	/* need to set a limit somewhere, but yes, this is likely overkill */
 	ND_IOCTL_MAX_BUFLEN = SZ_4M,
diff --git a/include/linux/list_lru.h b/include/linux/list_lru.h
index d5ceb28..9dcaa3e 100644
--- a/include/linux/list_lru.h
+++ b/include/linux/list_lru.h
@@ -34,7 +34,7 @@ struct list_lru_one {
 struct list_lru_memcg {
 	struct rcu_head		rcu;
 	/* array of per cgroup lists, indexed by memcg_cache_id */
-	struct list_lru_one	*lru[0];
+	struct list_lru_one	*lru[];
 };
 
 struct list_lru_node {
diff --git a/include/linux/memblock.h b/include/linux/memblock.h
index 079d17d..6bc37a7 100644
--- a/include/linux/memblock.h
+++ b/include/linux/memblock.h
@@ -348,6 +348,9 @@ static inline int memblock_get_region_node(const struct memblock_region *r)
 
 phys_addr_t memblock_phys_alloc_range(phys_addr_t size, phys_addr_t align,
 				      phys_addr_t start, phys_addr_t end);
+phys_addr_t memblock_alloc_range_nid(phys_addr_t size,
+				      phys_addr_t align, phys_addr_t start,
+				      phys_addr_t end, int nid, bool exact_nid);
 phys_addr_t memblock_phys_alloc_try_nid(phys_addr_t size, phys_addr_t align, int nid);
 
 static inline phys_addr_t memblock_phys_alloc(phys_addr_t size,
diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h
index 1b4150f..d275c72 100644
--- a/include/linux/memcontrol.h
+++ b/include/linux/memcontrol.h
@@ -106,7 +106,7 @@ struct lruvec_stat {
  */
 struct memcg_shrinker_map {
 	struct rcu_head rcu;
-	unsigned long map[0];
+	unsigned long map[];
 };
 
 /*
@@ -148,7 +148,7 @@ struct mem_cgroup_threshold_ary {
 	/* Size of entries[] */
 	unsigned int size;
 	/* Array of thresholds */
-	struct mem_cgroup_threshold entries[0];
+	struct mem_cgroup_threshold entries[];
 };
 
 struct mem_cgroup_thresholds {
diff --git a/include/linux/memory.h b/include/linux/memory.h
index 0b8d791..439a89e 100644
--- a/include/linux/memory.h
+++ b/include/linux/memory.h
@@ -26,7 +26,6 @@
 struct memory_block {
 	unsigned long start_section_nr;
 	unsigned long state;		/* serialized by the dev->lock */
-	int section_count;		/* serialized by mem_sysfs_mutex */
 	int online_type;		/* for passing data to online routine */
 	int phys_device;		/* to which fru does this belong? */
 	struct device dev;
diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h
index f4d5915..93d9ada 100644
--- a/include/linux/memory_hotplug.h
+++ b/include/linux/memory_hotplug.h
@@ -47,20 +47,25 @@ enum {
 
 /* Types for control the zone type of onlined and offlined memory */
 enum {
-	MMOP_OFFLINE = -1,
-	MMOP_ONLINE_KEEP,
+	/* Offline the memory. */
+	MMOP_OFFLINE = 0,
+	/* Online the memory. Zone depends, see default_zone_for_pfn(). */
+	MMOP_ONLINE,
+	/* Online the memory to ZONE_NORMAL. */
 	MMOP_ONLINE_KERNEL,
+	/* Online the memory to ZONE_MOVABLE. */
 	MMOP_ONLINE_MOVABLE,
 };
 
 /*
- * Restrictions for the memory hotplug:
- * flags:  MHP_ flags
- * altmap: alternative allocator for memmap array
+ * Extended parameters for memory hotplug:
+ * altmap: alternative allocator for memmap array (optional)
+ * pgprot: page protection flags to apply to newly created page tables
+ *	(required)
  */
-struct mhp_restrictions {
-	unsigned long flags;
+struct mhp_params {
 	struct vmem_altmap *altmap;
+	pgprot_t pgprot;
 };
 
 /*
@@ -110,10 +115,13 @@ extern int restore_online_page_callback(online_page_callback_t callback);
 extern int try_online_node(int nid);
 
 extern int arch_add_memory(int nid, u64 start, u64 size,
-			struct mhp_restrictions *restrictions);
+			   struct mhp_params *params);
 extern u64 max_mem_size;
 
-extern bool memhp_auto_online;
+extern int memhp_online_type_from_str(const char *str);
+
+/* Default online_type (MMOP_*) when new memory blocks are added. */
+extern int memhp_default_online_type;
 /* If movable_node boot option specified */
 extern bool movable_node_enabled;
 static inline bool movable_node_is_enabled(void)
@@ -128,17 +136,17 @@ extern void __remove_pages(unsigned long start_pfn, unsigned long nr_pages,
 
 /* reasonably generic interface to expand the physical pages */
 extern int __add_pages(int nid, unsigned long start_pfn, unsigned long nr_pages,
-		       struct mhp_restrictions *restrictions);
+		       struct mhp_params *params);
 
 #ifndef CONFIG_ARCH_HAS_ADD_PAGES
 static inline int add_pages(int nid, unsigned long start_pfn,
-		unsigned long nr_pages, struct mhp_restrictions *restrictions)
+		unsigned long nr_pages, struct mhp_params *params)
 {
-	return __add_pages(nid, start_pfn, nr_pages, restrictions);
+	return __add_pages(nid, start_pfn, nr_pages, params);
 }
 #else /* ARCH_HAS_ADD_PAGES */
 int add_pages(int nid, unsigned long start_pfn, unsigned long nr_pages,
-	      struct mhp_restrictions *restrictions);
+	      struct mhp_params *params);
 #endif /* ARCH_HAS_ADD_PAGES */
 
 #ifdef CONFIG_NUMA
diff --git a/include/linux/memremap.h b/include/linux/memremap.h
index 60d97e8..5f5b2df 100644
--- a/include/linux/memremap.h
+++ b/include/linux/memremap.h
@@ -98,8 +98,6 @@ struct dev_pagemap_ops {
  * @ref: reference count that pins the devm_memremap_pages() mapping
  * @internal_ref: internal reference if @ref is not provided by the caller
  * @done: completion for @internal_ref
- * @dev: host device of the mapping for debug
- * @data: private data pointer for page_free()
  * @type: memory type: see MEMORY_* in memory_hotplug.h
  * @flags: PGMAP_* flags to specify defailed behavior
  * @ops: method table
@@ -136,6 +134,7 @@ struct dev_pagemap *get_dev_pagemap(unsigned long pfn,
 
 unsigned long vmem_altmap_offset(struct vmem_altmap *altmap);
 void vmem_altmap_free(struct vmem_altmap *altmap, unsigned long nr_pfns);
+unsigned long memremap_compat_align(void);
 #else
 static inline void *devm_memremap_pages(struct device *dev,
 		struct dev_pagemap *pgmap)
@@ -169,6 +168,12 @@ static inline void vmem_altmap_free(struct vmem_altmap *altmap,
 		unsigned long nr_pfns)
 {
 }
+
+/* when memremap_pages() is disabled all archs can remap a single page */
+static inline unsigned long memremap_compat_align(void)
+{
+	return PAGE_SIZE;
+}
 #endif /* CONFIG_ZONE_DEVICE */
 
 static inline void put_dev_pagemap(struct dev_pagemap *pgmap)
@@ -176,4 +181,5 @@ static inline void put_dev_pagemap(struct dev_pagemap *pgmap)
 	if (pgmap)
 		percpu_ref_put(pgmap->ref);
 }
+
 #endif /* _LINUX_MEMREMAP_H_ */
diff --git a/include/linux/mfd/iqs62x.h b/include/linux/mfd/iqs62x.h
new file mode 100644
index 0000000..043d3b6
--- /dev/null
+++ b/include/linux/mfd/iqs62x.h
@@ -0,0 +1,139 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Azoteq IQS620A/621/622/624/625 Multi-Function Sensors
+ *
+ * Copyright (C) 2019 Jeff LaBundy <jeff@labundy.com>
+ */
+
+#ifndef __LINUX_MFD_IQS62X_H
+#define __LINUX_MFD_IQS62X_H
+
+#define IQS620_PROD_NUM				0x41
+#define IQS621_PROD_NUM				0x46
+#define IQS622_PROD_NUM				0x42
+#define IQS624_PROD_NUM				0x43
+#define IQS625_PROD_NUM				0x4E
+
+#define IQS621_ALS_FLAGS			0x16
+#define IQS622_ALS_FLAGS			0x14
+
+#define IQS624_HALL_UI				0x70
+#define IQS624_HALL_UI_WHL_EVENT		BIT(4)
+#define IQS624_HALL_UI_INT_EVENT		BIT(3)
+#define IQS624_HALL_UI_AUTO_CAL			BIT(2)
+
+#define IQS624_INTERVAL_DIV			0x7D
+
+#define IQS620_GLBL_EVENT_MASK			0xD7
+#define IQS620_GLBL_EVENT_MASK_PMU		BIT(6)
+
+#define IQS62X_NUM_KEYS				16
+#define IQS62X_NUM_EVENTS			(IQS62X_NUM_KEYS + 5)
+
+#define IQS62X_EVENT_SIZE			10
+
+enum iqs62x_ui_sel {
+	IQS62X_UI_PROX,
+	IQS62X_UI_SAR1,
+};
+
+enum iqs62x_event_reg {
+	IQS62X_EVENT_NONE,
+	IQS62X_EVENT_SYS,
+	IQS62X_EVENT_PROX,
+	IQS62X_EVENT_HYST,
+	IQS62X_EVENT_HALL,
+	IQS62X_EVENT_ALS,
+	IQS62X_EVENT_IR,
+	IQS62X_EVENT_WHEEL,
+	IQS62X_EVENT_INTER,
+	IQS62X_EVENT_UI_LO,
+	IQS62X_EVENT_UI_HI,
+};
+
+enum iqs62x_event_flag {
+	/* keys */
+	IQS62X_EVENT_PROX_CH0_T,
+	IQS62X_EVENT_PROX_CH0_P,
+	IQS62X_EVENT_PROX_CH1_T,
+	IQS62X_EVENT_PROX_CH1_P,
+	IQS62X_EVENT_PROX_CH2_T,
+	IQS62X_EVENT_PROX_CH2_P,
+	IQS62X_EVENT_HYST_POS_T,
+	IQS62X_EVENT_HYST_POS_P,
+	IQS62X_EVENT_HYST_NEG_T,
+	IQS62X_EVENT_HYST_NEG_P,
+	IQS62X_EVENT_SAR1_ACT,
+	IQS62X_EVENT_SAR1_QRD,
+	IQS62X_EVENT_SAR1_MOVE,
+	IQS62X_EVENT_SAR1_HALT,
+	IQS62X_EVENT_WHEEL_UP,
+	IQS62X_EVENT_WHEEL_DN,
+
+	/* switches */
+	IQS62X_EVENT_HALL_N_T,
+	IQS62X_EVENT_HALL_N_P,
+	IQS62X_EVENT_HALL_S_T,
+	IQS62X_EVENT_HALL_S_P,
+
+	/* everything else */
+	IQS62X_EVENT_SYS_RESET,
+};
+
+struct iqs62x_event_data {
+	u16 ui_data;
+	u8 als_flags;
+	u8 ir_flags;
+	u8 interval;
+};
+
+struct iqs62x_event_desc {
+	enum iqs62x_event_reg reg;
+	u8 mask;
+	u8 val;
+};
+
+struct iqs62x_dev_desc {
+	const char *dev_name;
+	const struct mfd_cell *sub_devs;
+	int num_sub_devs;
+
+	u8 prod_num;
+	u8 sw_num;
+	const u8 *cal_regs;
+	int num_cal_regs;
+
+	u8 prox_mask;
+	u8 sar_mask;
+	u8 hall_mask;
+	u8 hyst_mask;
+	u8 temp_mask;
+	u8 als_mask;
+	u8 ir_mask;
+
+	u8 prox_settings;
+	u8 als_flags;
+	u8 hall_flags;
+	u8 hyst_shift;
+
+	u8 interval;
+	u8 interval_div;
+
+	u8 clk_div;
+	const char *fw_name;
+	const enum iqs62x_event_reg (*event_regs)[IQS62X_EVENT_SIZE];
+};
+
+struct iqs62x_core {
+	const struct iqs62x_dev_desc *dev_desc;
+	struct i2c_client *client;
+	struct regmap *regmap;
+	struct blocking_notifier_head nh;
+	struct list_head fw_blk_head;
+	struct completion fw_done;
+	enum iqs62x_ui_sel ui_sel;
+};
+
+extern const struct iqs62x_event_desc iqs62x_events[IQS62X_NUM_EVENTS];
+
+#endif /* __LINUX_MFD_IQS62X_H */
diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h
index a59bf32..e07f6e6 100644
--- a/include/linux/mfd/rk808.h
+++ b/include/linux/mfd/rk808.h
@@ -620,7 +620,5 @@ struct rk808 {
 	long				variant;
 	const struct regmap_config	*regmap_cfg;
 	const struct regmap_irq_chip	*regmap_irq_chip;
-	void				(*pm_pwroff_fn)(void);
-	void				(*pm_pwroff_prep_fn)(void);
 };
 #endif /* __LINUX_REGULATOR_RK808_H */
diff --git a/include/linux/mfd/rn5t618.h b/include/linux/mfd/rn5t618.h
index d62ef48..fba0df1 100644
--- a/include/linux/mfd/rn5t618.h
+++ b/include/linux/mfd/rn5t618.h
@@ -139,6 +139,17 @@
 #define RN5T618_INTPOL			0x9c
 #define RN5T618_INTEN			0x9d
 #define RN5T618_INTMON			0x9e
+
+#define RN5T618_RTC_SECONDS     0xA0
+#define RN5T618_RTC_MDAY        0xA4
+#define RN5T618_RTC_MONTH       0xA5
+#define RN5T618_RTC_YEAR        0xA6
+#define RN5T618_RTC_ADJUST      0xA7
+#define RN5T618_RTC_ALARM_Y_SEC 0xA8
+#define RN5T618_RTC_DAL_MONTH   0xAC
+#define RN5T618_RTC_CTRL1       0xAE
+#define RN5T618_RTC_CTRL2       0xAF
+
 #define RN5T618_PREVINDAC		0xb0
 #define RN5T618_BATDAC			0xb1
 #define RN5T618_CHGCTL1			0xb3
@@ -242,9 +253,24 @@ enum {
 	RC5T619,
 };
 
+/* RN5T618 IRQ definitions */
+enum {
+	RN5T618_IRQ_SYS = 0,
+	RN5T618_IRQ_DCDC,
+	RN5T618_IRQ_RTC,
+	RN5T618_IRQ_ADC,
+	RN5T618_IRQ_GPIO,
+	RN5T618_IRQ_CHG,
+	RN5T618_NR_IRQS,
+};
+
 struct rn5t618 {
 	struct regmap *regmap;
+	struct device *dev;
 	long variant;
+
+	int irq;
+	struct regmap_irq_chip_data *irq_data;
 };
 
 #endif /* __LINUX_MFD_RN5T618_H */
diff --git a/include/linux/mfd/sc27xx-pmic.h b/include/linux/mfd/sc27xx-pmic.h
new file mode 100644
index 0000000..57e45c0
--- /dev/null
+++ b/include/linux/mfd/sc27xx-pmic.h
@@ -0,0 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __LINUX_MFD_SC27XX_PMIC_H
+#define __LINUX_MFD_SC27XX_PMIC_H
+
+extern enum usb_charger_type sprd_pmic_detect_charger_type(struct device *dev);
+
+#endif /* __LINUX_MFD_SC27XX_PMIC_H */
diff --git a/include/linux/mfd/wm831x/pdata.h b/include/linux/mfd/wm831x/pdata.h
index 986986f..75aa94d 100644
--- a/include/linux/mfd/wm831x/pdata.h
+++ b/include/linux/mfd/wm831x/pdata.h
@@ -89,7 +89,6 @@ enum wm831x_watchdog_action {
 
 struct wm831x_watchdog_pdata {
 	enum wm831x_watchdog_action primary, secondary;
-	int update_gpio;
 	unsigned int software:1;
 };
 
diff --git a/include/linux/mhi.h b/include/linux/mhi.h
new file mode 100644
index 0000000..ad19960
--- /dev/null
+++ b/include/linux/mhi.h
@@ -0,0 +1,700 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
+ *
+ */
+#ifndef _MHI_H_
+#define _MHI_H_
+
+#include <linux/device.h>
+#include <linux/dma-direction.h>
+#include <linux/mutex.h>
+#include <linux/rwlock_types.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
+#include <linux/spinlock_types.h>
+#include <linux/wait.h>
+#include <linux/workqueue.h>
+
+struct mhi_chan;
+struct mhi_event;
+struct mhi_ctxt;
+struct mhi_cmd;
+struct mhi_buf_info;
+
+/**
+ * enum mhi_callback - MHI callback
+ * @MHI_CB_IDLE: MHI entered idle state
+ * @MHI_CB_PENDING_DATA: New data available for client to process
+ * @MHI_CB_LPM_ENTER: MHI host entered low power mode
+ * @MHI_CB_LPM_EXIT: MHI host about to exit low power mode
+ * @MHI_CB_EE_RDDM: MHI device entered RDDM exec env
+ * @MHI_CB_EE_MISSION_MODE: MHI device entered Mission Mode exec env
+ * @MHI_CB_SYS_ERROR: MHI device entered error state (may recover)
+ * @MHI_CB_FATAL_ERROR: MHI device entered fatal error state
+ * @MHI_CB_BW_REQ: Received a bandwidth switch request from device
+ */
+enum mhi_callback {
+	MHI_CB_IDLE,
+	MHI_CB_PENDING_DATA,
+	MHI_CB_LPM_ENTER,
+	MHI_CB_LPM_EXIT,
+	MHI_CB_EE_RDDM,
+	MHI_CB_EE_MISSION_MODE,
+	MHI_CB_SYS_ERROR,
+	MHI_CB_FATAL_ERROR,
+	MHI_CB_BW_REQ,
+};
+
+/**
+ * enum mhi_flags - Transfer flags
+ * @MHI_EOB: End of buffer for bulk transfer
+ * @MHI_EOT: End of transfer
+ * @MHI_CHAIN: Linked transfer
+ */
+enum mhi_flags {
+	MHI_EOB,
+	MHI_EOT,
+	MHI_CHAIN,
+};
+
+/**
+ * enum mhi_device_type - Device types
+ * @MHI_DEVICE_XFER: Handles data transfer
+ * @MHI_DEVICE_CONTROLLER: Control device
+ */
+enum mhi_device_type {
+	MHI_DEVICE_XFER,
+	MHI_DEVICE_CONTROLLER,
+};
+
+/**
+ * enum mhi_ch_type - Channel types
+ * @MHI_CH_TYPE_INVALID: Invalid channel type
+ * @MHI_CH_TYPE_OUTBOUND: Outbound channel to the device
+ * @MHI_CH_TYPE_INBOUND: Inbound channel from the device
+ * @MHI_CH_TYPE_INBOUND_COALESCED: Coalesced channel for the device to combine
+ *				   multiple packets and send them as a single
+ *				   large packet to reduce CPU consumption
+ */
+enum mhi_ch_type {
+	MHI_CH_TYPE_INVALID = 0,
+	MHI_CH_TYPE_OUTBOUND = DMA_TO_DEVICE,
+	MHI_CH_TYPE_INBOUND = DMA_FROM_DEVICE,
+	MHI_CH_TYPE_INBOUND_COALESCED = 3,
+};
+
+/**
+ * struct image_info - Firmware and RDDM table table
+ * @mhi_buf - Buffer for firmware and RDDM table
+ * @entries - # of entries in table
+ */
+struct image_info {
+	struct mhi_buf *mhi_buf;
+	struct bhi_vec_entry *bhi_vec;
+	u32 entries;
+};
+
+/**
+ * struct mhi_link_info - BW requirement
+ * target_link_speed - Link speed as defined by TLS bits in LinkControl reg
+ * target_link_width - Link width as defined by NLW bits in LinkStatus reg
+ */
+struct mhi_link_info {
+	unsigned int target_link_speed;
+	unsigned int target_link_width;
+};
+
+/**
+ * enum mhi_ee_type - Execution environment types
+ * @MHI_EE_PBL: Primary Bootloader
+ * @MHI_EE_SBL: Secondary Bootloader
+ * @MHI_EE_AMSS: Modem, aka the primary runtime EE
+ * @MHI_EE_RDDM: Ram dump download mode
+ * @MHI_EE_WFW: WLAN firmware mode
+ * @MHI_EE_PTHRU: Passthrough
+ * @MHI_EE_EDL: Embedded downloader
+ */
+enum mhi_ee_type {
+	MHI_EE_PBL,
+	MHI_EE_SBL,
+	MHI_EE_AMSS,
+	MHI_EE_RDDM,
+	MHI_EE_WFW,
+	MHI_EE_PTHRU,
+	MHI_EE_EDL,
+	MHI_EE_MAX_SUPPORTED = MHI_EE_EDL,
+	MHI_EE_DISABLE_TRANSITION, /* local EE, not related to mhi spec */
+	MHI_EE_NOT_SUPPORTED,
+	MHI_EE_MAX,
+};
+
+/**
+ * enum mhi_state - MHI states
+ * @MHI_STATE_RESET: Reset state
+ * @MHI_STATE_READY: Ready state
+ * @MHI_STATE_M0: M0 state
+ * @MHI_STATE_M1: M1 state
+ * @MHI_STATE_M2: M2 state
+ * @MHI_STATE_M3: M3 state
+ * @MHI_STATE_M3_FAST: M3 Fast state
+ * @MHI_STATE_BHI: BHI state
+ * @MHI_STATE_SYS_ERR: System Error state
+ */
+enum mhi_state {
+	MHI_STATE_RESET = 0x0,
+	MHI_STATE_READY = 0x1,
+	MHI_STATE_M0 = 0x2,
+	MHI_STATE_M1 = 0x3,
+	MHI_STATE_M2 = 0x4,
+	MHI_STATE_M3 = 0x5,
+	MHI_STATE_M3_FAST = 0x6,
+	MHI_STATE_BHI = 0x7,
+	MHI_STATE_SYS_ERR = 0xFF,
+	MHI_STATE_MAX,
+};
+
+/**
+ * enum mhi_ch_ee_mask - Execution environment mask for channel
+ * @MHI_CH_EE_PBL: Allow channel to be used in PBL EE
+ * @MHI_CH_EE_SBL: Allow channel to be used in SBL EE
+ * @MHI_CH_EE_AMSS: Allow channel to be used in AMSS EE
+ * @MHI_CH_EE_RDDM: Allow channel to be used in RDDM EE
+ * @MHI_CH_EE_PTHRU: Allow channel to be used in PTHRU EE
+ * @MHI_CH_EE_WFW: Allow channel to be used in WFW EE
+ * @MHI_CH_EE_EDL: Allow channel to be used in EDL EE
+ */
+enum mhi_ch_ee_mask {
+	MHI_CH_EE_PBL = BIT(MHI_EE_PBL),
+	MHI_CH_EE_SBL = BIT(MHI_EE_SBL),
+	MHI_CH_EE_AMSS = BIT(MHI_EE_AMSS),
+	MHI_CH_EE_RDDM = BIT(MHI_EE_RDDM),
+	MHI_CH_EE_PTHRU = BIT(MHI_EE_PTHRU),
+	MHI_CH_EE_WFW = BIT(MHI_EE_WFW),
+	MHI_CH_EE_EDL = BIT(MHI_EE_EDL),
+};
+
+/**
+ * enum mhi_er_data_type - Event ring data types
+ * @MHI_ER_DATA: Only client data over this ring
+ * @MHI_ER_CTRL: MHI control data and client data
+ */
+enum mhi_er_data_type {
+	MHI_ER_DATA,
+	MHI_ER_CTRL,
+};
+
+/**
+ * enum mhi_db_brst_mode - Doorbell mode
+ * @MHI_DB_BRST_DISABLE: Burst mode disable
+ * @MHI_DB_BRST_ENABLE: Burst mode enable
+ */
+enum mhi_db_brst_mode {
+	MHI_DB_BRST_DISABLE = 0x2,
+	MHI_DB_BRST_ENABLE = 0x3,
+};
+
+/**
+ * struct mhi_channel_config - Channel configuration structure for controller
+ * @name: The name of this channel
+ * @num: The number assigned to this channel
+ * @num_elements: The number of elements that can be queued to this channel
+ * @local_elements: The local ring length of the channel
+ * @event_ring: The event rung index that services this channel
+ * @dir: Direction that data may flow on this channel
+ * @type: Channel type
+ * @ee_mask: Execution Environment mask for this channel
+ * @pollcfg: Polling configuration for burst mode.  0 is default.  milliseconds
+	     for UL channels, multiple of 8 ring elements for DL channels
+ * @doorbell: Doorbell mode
+ * @lpm_notify: The channel master requires low power mode notifications
+ * @offload_channel: The client manages the channel completely
+ * @doorbell_mode_switch: Channel switches to doorbell mode on M0 transition
+ * @auto_queue: Framework will automatically queue buffers for DL traffic
+ * @auto_start: Automatically start (open) this channel
+ * @wake-capable: Channel capable of waking up the system
+ */
+struct mhi_channel_config {
+	char *name;
+	u32 num;
+	u32 num_elements;
+	u32 local_elements;
+	u32 event_ring;
+	enum dma_data_direction dir;
+	enum mhi_ch_type type;
+	u32 ee_mask;
+	u32 pollcfg;
+	enum mhi_db_brst_mode doorbell;
+	bool lpm_notify;
+	bool offload_channel;
+	bool doorbell_mode_switch;
+	bool auto_queue;
+	bool auto_start;
+	bool wake_capable;
+};
+
+/**
+ * struct mhi_event_config - Event ring configuration structure for controller
+ * @num_elements: The number of elements that can be queued to this ring
+ * @irq_moderation_ms: Delay irq for additional events to be aggregated
+ * @irq: IRQ associated with this ring
+ * @channel: Dedicated channel number. U32_MAX indicates a non-dedicated ring
+ * @priority: Priority of this ring. Use 1 for now
+ * @mode: Doorbell mode
+ * @data_type: Type of data this ring will process
+ * @hardware_event: This ring is associated with hardware channels
+ * @client_managed: This ring is client managed
+ * @offload_channel: This ring is associated with an offloaded channel
+ */
+struct mhi_event_config {
+	u32 num_elements;
+	u32 irq_moderation_ms;
+	u32 irq;
+	u32 channel;
+	u32 priority;
+	enum mhi_db_brst_mode mode;
+	enum mhi_er_data_type data_type;
+	bool hardware_event;
+	bool client_managed;
+	bool offload_channel;
+};
+
+/**
+ * struct mhi_controller_config - Root MHI controller configuration
+ * @max_channels: Maximum number of channels supported
+ * @timeout_ms: Timeout value for operations. 0 means use default
+ * @buf_len: Size of automatically allocated buffers. 0 means use default
+ * @num_channels: Number of channels defined in @ch_cfg
+ * @ch_cfg: Array of defined channels
+ * @num_events: Number of event rings defined in @event_cfg
+ * @event_cfg: Array of defined event rings
+ * @use_bounce_buf: Use a bounce buffer pool due to limited DDR access
+ * @m2_no_db: Host is not allowed to ring DB in M2 state
+ */
+struct mhi_controller_config {
+	u32 max_channels;
+	u32 timeout_ms;
+	u32 buf_len;
+	u32 num_channels;
+	struct mhi_channel_config *ch_cfg;
+	u32 num_events;
+	struct mhi_event_config *event_cfg;
+	bool use_bounce_buf;
+	bool m2_no_db;
+};
+
+/**
+ * struct mhi_controller - Master MHI controller structure
+ * @cntrl_dev: Pointer to the struct device of physical bus acting as the MHI
+ *            controller (required)
+ * @mhi_dev: MHI device instance for the controller
+ * @regs: Base address of MHI MMIO register space (required)
+ * @bhi: Points to base of MHI BHI register space
+ * @bhie: Points to base of MHI BHIe register space
+ * @wake_db: MHI WAKE doorbell register address
+ * @iova_start: IOMMU starting address for data (required)
+ * @iova_stop: IOMMU stop address for data (required)
+ * @fw_image: Firmware image name for normal booting (required)
+ * @edl_image: Firmware image name for emergency download mode (optional)
+ * @rddm_size: RAM dump size that host should allocate for debugging purpose
+ * @sbl_size: SBL image size downloaded through BHIe (optional)
+ * @seg_len: BHIe vector size (optional)
+ * @fbc_image: Points to firmware image buffer
+ * @rddm_image: Points to RAM dump buffer
+ * @mhi_chan: Points to the channel configuration table
+ * @lpm_chans: List of channels that require LPM notifications
+ * @irq: base irq # to request (required)
+ * @max_chan: Maximum number of channels the controller supports
+ * @total_ev_rings: Total # of event rings allocated
+ * @hw_ev_rings: Number of hardware event rings
+ * @sw_ev_rings: Number of software event rings
+ * @nr_irqs_req: Number of IRQs required to operate (optional)
+ * @nr_irqs: Number of IRQ allocated by bus master (required)
+ * @family_number: MHI controller family number
+ * @device_number: MHI controller device number
+ * @major_version: MHI controller major revision number
+ * @minor_version: MHI controller minor revision number
+ * @mhi_event: MHI event ring configurations table
+ * @mhi_cmd: MHI command ring configurations table
+ * @mhi_ctxt: MHI device context, shared memory between host and device
+ * @pm_mutex: Mutex for suspend/resume operation
+ * @pm_lock: Lock for protecting MHI power management state
+ * @timeout_ms: Timeout in ms for state transitions
+ * @pm_state: MHI power management state
+ * @db_access: DB access states
+ * @ee: MHI device execution environment
+ * @dev_state: MHI device state
+ * @dev_wake: Device wakeup count
+ * @pending_pkts: Pending packets for the controller
+ * @transition_list: List of MHI state transitions
+ * @transition_lock: Lock for protecting MHI state transition list
+ * @wlock: Lock for protecting device wakeup
+ * @mhi_link_info: Device bandwidth info
+ * @st_worker: State transition worker
+ * @fw_worker: Firmware download worker
+ * @syserr_worker: System error worker
+ * @state_event: State change event
+ * @status_cb: CB function to notify power states of the device (required)
+ * @link_status: CB function to query link status of the device (required)
+ * @wake_get: CB function to assert device wake (optional)
+ * @wake_put: CB function to de-assert device wake (optional)
+ * @wake_toggle: CB function to assert and de-assert device wake (optional)
+ * @runtime_get: CB function to controller runtime resume (required)
+ * @runtimet_put: CB function to decrement pm usage (required)
+ * @map_single: CB function to create TRE buffer
+ * @unmap_single: CB function to destroy TRE buffer
+ * @buffer_len: Bounce buffer length
+ * @bounce_buf: Use of bounce buffer
+ * @fbc_download: MHI host needs to do complete image transfer (optional)
+ * @pre_init: MHI host needs to do pre-initialization before power up
+ * @wake_set: Device wakeup set flag
+ *
+ * Fields marked as (required) need to be populated by the controller driver
+ * before calling mhi_register_controller(). For the fields marked as (optional)
+ * they can be populated depending on the usecase.
+ *
+ * The following fields are present for the purpose of implementing any device
+ * specific quirks or customizations for specific MHI revisions used in device
+ * by the controller drivers. The MHI stack will just populate these fields
+ * during mhi_register_controller():
+ *  family_number
+ *  device_number
+ *  major_version
+ *  minor_version
+ */
+struct mhi_controller {
+	struct device *cntrl_dev;
+	struct mhi_device *mhi_dev;
+	void __iomem *regs;
+	void __iomem *bhi;
+	void __iomem *bhie;
+	void __iomem *wake_db;
+
+	dma_addr_t iova_start;
+	dma_addr_t iova_stop;
+	const char *fw_image;
+	const char *edl_image;
+	size_t rddm_size;
+	size_t sbl_size;
+	size_t seg_len;
+	struct image_info *fbc_image;
+	struct image_info *rddm_image;
+	struct mhi_chan *mhi_chan;
+	struct list_head lpm_chans;
+	int *irq;
+	u32 max_chan;
+	u32 total_ev_rings;
+	u32 hw_ev_rings;
+	u32 sw_ev_rings;
+	u32 nr_irqs_req;
+	u32 nr_irqs;
+	u32 family_number;
+	u32 device_number;
+	u32 major_version;
+	u32 minor_version;
+
+	struct mhi_event *mhi_event;
+	struct mhi_cmd *mhi_cmd;
+	struct mhi_ctxt *mhi_ctxt;
+
+	struct mutex pm_mutex;
+	rwlock_t pm_lock;
+	u32 timeout_ms;
+	u32 pm_state;
+	u32 db_access;
+	enum mhi_ee_type ee;
+	enum mhi_state dev_state;
+	atomic_t dev_wake;
+	atomic_t pending_pkts;
+	struct list_head transition_list;
+	spinlock_t transition_lock;
+	spinlock_t wlock;
+	struct mhi_link_info mhi_link_info;
+	struct work_struct st_worker;
+	struct work_struct fw_worker;
+	struct work_struct syserr_worker;
+	wait_queue_head_t state_event;
+
+	void (*status_cb)(struct mhi_controller *mhi_cntrl,
+			  enum mhi_callback cb);
+	int (*link_status)(struct mhi_controller *mhi_cntrl);
+	void (*wake_get)(struct mhi_controller *mhi_cntrl, bool override);
+	void (*wake_put)(struct mhi_controller *mhi_cntrl, bool override);
+	void (*wake_toggle)(struct mhi_controller *mhi_cntrl);
+	int (*runtime_get)(struct mhi_controller *mhi_cntrl);
+	void (*runtime_put)(struct mhi_controller *mhi_cntrl);
+	int (*map_single)(struct mhi_controller *mhi_cntrl,
+			  struct mhi_buf_info *buf);
+	void (*unmap_single)(struct mhi_controller *mhi_cntrl,
+			     struct mhi_buf_info *buf);
+
+	size_t buffer_len;
+	bool bounce_buf;
+	bool fbc_download;
+	bool pre_init;
+	bool wake_set;
+};
+
+/**
+ * struct mhi_device - Structure representing a MHI device which binds
+ *                     to channels
+ * @id: Pointer to MHI device ID struct
+ * @chan_name: Name of the channel to which the device binds
+ * @mhi_cntrl: Controller the device belongs to
+ * @ul_chan: UL channel for the device
+ * @dl_chan: DL channel for the device
+ * @dev: Driver model device node for the MHI device
+ * @dev_type: MHI device type
+ * @ul_chan_id: MHI channel id for UL transfer
+ * @dl_chan_id: MHI channel id for DL transfer
+ * @dev_wake: Device wakeup counter
+ */
+struct mhi_device {
+	const struct mhi_device_id *id;
+	const char *chan_name;
+	struct mhi_controller *mhi_cntrl;
+	struct mhi_chan *ul_chan;
+	struct mhi_chan *dl_chan;
+	struct device dev;
+	enum mhi_device_type dev_type;
+	int ul_chan_id;
+	int dl_chan_id;
+	u32 dev_wake;
+};
+
+/**
+ * struct mhi_result - Completed buffer information
+ * @buf_addr: Address of data buffer
+ * @bytes_xferd: # of bytes transferred
+ * @dir: Channel direction
+ * @transaction_status: Status of last transaction
+ */
+struct mhi_result {
+	void *buf_addr;
+	size_t bytes_xferd;
+	enum dma_data_direction dir;
+	int transaction_status;
+};
+
+/**
+ * struct mhi_buf - MHI Buffer description
+ * @buf: Virtual address of the buffer
+ * @name: Buffer label. For offload channel, configurations name must be:
+ *        ECA - Event context array data
+ *        CCA - Channel context array data
+ * @dma_addr: IOMMU address of the buffer
+ * @len: # of bytes
+ */
+struct mhi_buf {
+	void *buf;
+	const char *name;
+	dma_addr_t dma_addr;
+	size_t len;
+};
+
+/**
+ * struct mhi_driver - Structure representing a MHI client driver
+ * @probe: CB function for client driver probe function
+ * @remove: CB function for client driver remove function
+ * @ul_xfer_cb: CB function for UL data transfer
+ * @dl_xfer_cb: CB function for DL data transfer
+ * @status_cb: CB functions for asynchronous status
+ * @driver: Device driver model driver
+ */
+struct mhi_driver {
+	const struct mhi_device_id *id_table;
+	int (*probe)(struct mhi_device *mhi_dev,
+		     const struct mhi_device_id *id);
+	void (*remove)(struct mhi_device *mhi_dev);
+	void (*ul_xfer_cb)(struct mhi_device *mhi_dev,
+			   struct mhi_result *result);
+	void (*dl_xfer_cb)(struct mhi_device *mhi_dev,
+			   struct mhi_result *result);
+	void (*status_cb)(struct mhi_device *mhi_dev, enum mhi_callback mhi_cb);
+	struct device_driver driver;
+};
+
+#define to_mhi_driver(drv) container_of(drv, struct mhi_driver, driver)
+#define to_mhi_device(dev) container_of(dev, struct mhi_device, dev)
+
+/**
+ * mhi_register_controller - Register MHI controller
+ * @mhi_cntrl: MHI controller to register
+ * @config: Configuration to use for the controller
+ */
+int mhi_register_controller(struct mhi_controller *mhi_cntrl,
+			    struct mhi_controller_config *config);
+
+/**
+ * mhi_unregister_controller - Unregister MHI controller
+ * @mhi_cntrl: MHI controller to unregister
+ */
+void mhi_unregister_controller(struct mhi_controller *mhi_cntrl);
+
+/*
+ * module_mhi_driver() - Helper macro for drivers that don't do
+ * anything special other than using default mhi_driver_register() and
+ * mhi_driver_unregister().  This eliminates a lot of boilerplate.
+ * Each module may only use this macro once.
+ */
+#define module_mhi_driver(mhi_drv) \
+	module_driver(mhi_drv, mhi_driver_register, \
+		      mhi_driver_unregister)
+
+/*
+ * Macro to avoid include chaining to get THIS_MODULE
+ */
+#define mhi_driver_register(mhi_drv) \
+	__mhi_driver_register(mhi_drv, THIS_MODULE)
+
+/**
+ * __mhi_driver_register - Register driver with MHI framework
+ * @mhi_drv: Driver associated with the device
+ * @owner: The module owner
+ */
+int __mhi_driver_register(struct mhi_driver *mhi_drv, struct module *owner);
+
+/**
+ * mhi_driver_unregister - Unregister a driver for mhi_devices
+ * @mhi_drv: Driver associated with the device
+ */
+void mhi_driver_unregister(struct mhi_driver *mhi_drv);
+
+/**
+ * mhi_set_mhi_state - Set MHI device state
+ * @mhi_cntrl: MHI controller
+ * @state: State to set
+ */
+void mhi_set_mhi_state(struct mhi_controller *mhi_cntrl,
+		       enum mhi_state state);
+
+/**
+ * mhi_prepare_for_power_up - Do pre-initialization before power up.
+ *                            This is optional, call this before power up if
+ *                            the controller does not want bus framework to
+ *                            automatically free any allocated memory during
+ *                            shutdown process.
+ * @mhi_cntrl: MHI controller
+ */
+int mhi_prepare_for_power_up(struct mhi_controller *mhi_cntrl);
+
+/**
+ * mhi_async_power_up - Start MHI power up sequence
+ * @mhi_cntrl: MHI controller
+ */
+int mhi_async_power_up(struct mhi_controller *mhi_cntrl);
+
+/**
+ * mhi_sync_power_up - Start MHI power up sequence and wait till the device
+ *                     device enters valid EE state
+ * @mhi_cntrl: MHI controller
+ */
+int mhi_sync_power_up(struct mhi_controller *mhi_cntrl);
+
+/**
+ * mhi_power_down - Start MHI power down sequence
+ * @mhi_cntrl: MHI controller
+ * @graceful: Link is still accessible, so do a graceful shutdown process
+ */
+void mhi_power_down(struct mhi_controller *mhi_cntrl, bool graceful);
+
+/**
+ * mhi_unprepare_after_power_down - Free any allocated memory after power down
+ * @mhi_cntrl: MHI controller
+ */
+void mhi_unprepare_after_power_down(struct mhi_controller *mhi_cntrl);
+
+/**
+ * mhi_download_rddm_img - Download ramdump image from device for
+ *                         debugging purpose.
+ * @mhi_cntrl: MHI controller
+ * @in_panic: Download rddm image during kernel panic
+ */
+int mhi_download_rddm_img(struct mhi_controller *mhi_cntrl, bool in_panic);
+
+/**
+ * mhi_force_rddm_mode - Force device into rddm mode
+ * @mhi_cntrl: MHI controller
+ */
+int mhi_force_rddm_mode(struct mhi_controller *mhi_cntrl);
+
+/**
+ * mhi_get_mhi_state - Get MHI state of the device
+ * @mhi_cntrl: MHI controller
+ */
+enum mhi_state mhi_get_mhi_state(struct mhi_controller *mhi_cntrl);
+
+/**
+ * mhi_device_get - Disable device low power mode
+ * @mhi_dev: Device associated with the channel
+ */
+void mhi_device_get(struct mhi_device *mhi_dev);
+
+/**
+ * mhi_device_get_sync - Disable device low power mode. Synchronously
+ *                       take the controller out of suspended state
+ * @mhi_dev: Device associated with the channel
+ */
+int mhi_device_get_sync(struct mhi_device *mhi_dev);
+
+/**
+ * mhi_device_put - Re-enable device low power mode
+ * @mhi_dev: Device associated with the channel
+ */
+void mhi_device_put(struct mhi_device *mhi_dev);
+
+/**
+ * mhi_prepare_for_transfer - Setup channel for data transfer
+ * @mhi_dev: Device associated with the channels
+ */
+int mhi_prepare_for_transfer(struct mhi_device *mhi_dev);
+
+/**
+ * mhi_unprepare_from_transfer - Unprepare the channels
+ * @mhi_dev: Device associated with the channels
+ */
+void mhi_unprepare_from_transfer(struct mhi_device *mhi_dev);
+
+/**
+ * mhi_poll - Poll for any available data in DL direction
+ * @mhi_dev: Device associated with the channels
+ * @budget: # of events to process
+ */
+int mhi_poll(struct mhi_device *mhi_dev, u32 budget);
+
+/**
+ * mhi_queue_dma - Send or receive DMA mapped buffers from client device
+ *                 over MHI channel
+ * @mhi_dev: Device associated with the channels
+ * @dir: DMA direction for the channel
+ * @mhi_buf: Buffer for holding the DMA mapped data
+ * @len: Buffer length
+ * @mflags: MHI transfer flags used for the transfer
+ */
+int mhi_queue_dma(struct mhi_device *mhi_dev, enum dma_data_direction dir,
+		  struct mhi_buf *mhi_buf, size_t len, enum mhi_flags mflags);
+
+/**
+ * mhi_queue_buf - Send or receive raw buffers from client device over MHI
+ *                 channel
+ * @mhi_dev: Device associated with the channels
+ * @dir: DMA direction for the channel
+ * @buf: Buffer for holding the data
+ * @len: Buffer length
+ * @mflags: MHI transfer flags used for the transfer
+ */
+int mhi_queue_buf(struct mhi_device *mhi_dev, enum dma_data_direction dir,
+		  void *buf, size_t len, enum mhi_flags mflags);
+
+/**
+ * mhi_queue_skb - Send or receive SKBs from client device over MHI channel
+ * @mhi_dev: Device associated with the channels
+ * @dir: DMA direction for the channel
+ * @skb: Buffer for holding SKBs
+ * @len: Buffer length
+ * @mflags: MHI transfer flags used for the transfer
+ */
+int mhi_queue_skb(struct mhi_device *mhi_dev, enum dma_data_direction dir,
+		  struct sk_buff *skb, size_t len, enum mhi_flags mflags);
+
+#endif /* _MHI_H_ */
diff --git a/include/linux/miscdevice.h b/include/linux/miscdevice.h
index becde69..c7a9300 100644
--- a/include/linux/miscdevice.h
+++ b/include/linux/miscdevice.h
@@ -25,20 +25,31 @@
 #define TEMP_MINOR		131	/* Temperature Sensor */
 #define APM_MINOR_DEV		134
 #define RTC_MINOR		135
-#define EFI_RTC_MINOR		136	/* EFI Time services */
+/*#define EFI_RTC_MINOR		136	was EFI Time services */
 #define VHCI_MINOR		137
 #define SUN_OPENPROM_MINOR	139
 #define DMAPI_MINOR		140	/* unused */
 #define NVRAM_MINOR		144
+#define SBUS_FLASH_MINOR	152
 #define SGI_MMTIMER		153
+#define PMU_MINOR		154
 #define STORE_QUEUE_MINOR	155	/* unused */
+#define LCD_MINOR		156
+#define AC_MINOR		157
+#define BUTTON_MINOR		158	/* Major 10, Minor 158, /dev/nwbutton */
+#define NWFLASH_MINOR		160	/* MAJOR is 10 - miscdevice */
+#define ENVCTRL_MINOR		162
 #define I2O_MINOR		166
+#define UCTRL_MINOR		174
 #define AGPGART_MINOR		175
+#define TOSH_MINOR_DEV		181
 #define HWRNG_MINOR		183
 #define MICROCODE_MINOR		184
+#define KEYPAD_MINOR		185
 #define IRNET_MINOR		187
 #define D7S_MINOR		193
 #define VFIO_MINOR		196
+#define PXA3XX_GCU_MINOR	197
 #define TUN_MINOR		200
 #define CUSE_MINOR		203
 #define MWAVE_MINOR		219	/* ACP/Mwave Modem */
@@ -49,6 +60,7 @@
 #define MISC_MCELOG_MINOR	227
 #define HPET_MINOR		228
 #define FUSE_MINOR		229
+#define SNAPSHOT_MINOR		231
 #define KVM_MINOR		232
 #define BTRFS_MINOR		234
 #define AUTOFS_MINOR		235
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 937bf71..5a32342 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -343,6 +343,20 @@ extern unsigned int kobjsize(const void *objp);
 /* Bits set in the VMA until the stack is in its final location */
 #define VM_STACK_INCOMPLETE_SETUP	(VM_RAND_READ | VM_SEQ_READ)
 
+#define TASK_EXEC ((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0)
+
+/* Common data flag combinations */
+#define VM_DATA_FLAGS_TSK_EXEC	(VM_READ | VM_WRITE | TASK_EXEC | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+#define VM_DATA_FLAGS_NON_EXEC	(VM_READ | VM_WRITE | VM_MAYREAD | \
+				 VM_MAYWRITE | VM_MAYEXEC)
+#define VM_DATA_FLAGS_EXEC	(VM_READ | VM_WRITE | VM_EXEC | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#ifndef VM_DATA_DEFAULT_FLAGS		/* arch can override this */
+#define VM_DATA_DEFAULT_FLAGS  VM_DATA_FLAGS_EXEC
+#endif
+
 #ifndef VM_STACK_DEFAULT_FLAGS		/* arch can override this */
 #define VM_STACK_DEFAULT_FLAGS VM_DATA_DEFAULT_FLAGS
 #endif
@@ -355,6 +369,10 @@ extern unsigned int kobjsize(const void *objp);
 
 #define VM_STACK_FLAGS	(VM_STACK | VM_STACK_DEFAULT_FLAGS | VM_ACCOUNT)
 
+/* VMA basic access permission flags */
+#define VM_ACCESS_FLAGS (VM_READ | VM_WRITE | VM_EXEC)
+
+
 /*
  * Special vmas that are non-mergable, non-mlock()able.
  */
@@ -629,6 +647,12 @@ static inline bool vma_is_foreign(struct vm_area_struct *vma)
 
 	return false;
 }
+
+static inline bool vma_is_accessible(struct vm_area_struct *vma)
+{
+	return vma->vm_flags & VM_ACCESS_FLAGS;
+}
+
 #ifdef CONFIG_SHMEM
 /*
  * The vma_is_shmem is not inline because it is used only by slow
@@ -1765,9 +1789,26 @@ extern unsigned long move_page_tables(struct vm_area_struct *vma,
 		unsigned long old_addr, struct vm_area_struct *new_vma,
 		unsigned long new_addr, unsigned long len,
 		bool need_rmap_locks);
+
+/*
+ * Flags used by change_protection().  For now we make it a bitmap so
+ * that we can pass in multiple flags just like parameters.  However
+ * for now all the callers are only use one of the flags at the same
+ * time.
+ */
+/* Whether we should allow dirty bit accounting */
+#define  MM_CP_DIRTY_ACCT                  (1UL << 0)
+/* Whether this protection change is for NUMA hints */
+#define  MM_CP_PROT_NUMA                   (1UL << 1)
+/* Whether this change is for write protecting */
+#define  MM_CP_UFFD_WP                     (1UL << 2) /* do wp */
+#define  MM_CP_UFFD_WP_RESOLVE             (1UL << 3) /* Resolve wp */
+#define  MM_CP_UFFD_WP_ALL                 (MM_CP_UFFD_WP | \
+					    MM_CP_UFFD_WP_RESOLVE)
+
 extern unsigned long change_protection(struct vm_area_struct *vma, unsigned long start,
 			      unsigned long end, pgprot_t newprot,
-			      int dirty_accountable, int prot_numa);
+			      unsigned long cp_flags);
 extern int mprotect_fixup(struct vm_area_struct *vma,
 			  struct vm_area_struct **pprev, unsigned long start,
 			  unsigned long end, unsigned long newflags);
@@ -1886,6 +1927,18 @@ static inline void sync_mm_rss(struct mm_struct *mm)
 }
 #endif
 
+#ifndef CONFIG_ARCH_HAS_PTE_SPECIAL
+static inline int pte_special(pte_t pte)
+{
+	return 0;
+}
+
+static inline pte_t pte_mkspecial(pte_t pte)
+{
+	return pte;
+}
+#endif
+
 #ifndef CONFIG_ARCH_HAS_PTE_DEVMAP
 static inline int pte_devmap(pte_t pte)
 {
@@ -2666,6 +2719,8 @@ struct vm_area_struct *find_extend_vma(struct mm_struct *, unsigned long addr);
 int remap_pfn_range(struct vm_area_struct *, unsigned long addr,
 			unsigned long pfn, unsigned long size, pgprot_t);
 int vm_insert_page(struct vm_area_struct *, unsigned long addr, struct page *);
+int vm_insert_pages(struct vm_area_struct *vma, unsigned long addr,
+			struct page **pages, unsigned long *num);
 int vm_map_pages(struct vm_area_struct *vma, struct page **pages,
 				unsigned long num);
 int vm_map_pages_zero(struct vm_area_struct *vma, struct page **pages,
@@ -3014,6 +3069,23 @@ extern long copy_huge_page_from_user(struct page *dst_page,
 				const void __user *usr_src,
 				unsigned int pages_per_huge_page,
 				bool allow_pagefault);
+
+/**
+ * vma_is_special_huge - Are transhuge page-table entries considered special?
+ * @vma: Pointer to the struct vm_area_struct to consider
+ *
+ * Whether transhuge page-table entries are considered "special" following
+ * the definition in vm_normal_page().
+ *
+ * Return: true if transhuge page-table entries should be considered special,
+ * false otherwise.
+ */
+static inline bool vma_is_special_huge(const struct vm_area_struct *vma)
+{
+	return vma_is_dax(vma) || (vma->vm_file &&
+				   (vma->vm_flags & (VM_PFNMAP | VM_MIXEDMAP)));
+}
+
 #endif /* CONFIG_TRANSPARENT_HUGEPAGE || CONFIG_HUGETLBFS */
 
 #ifdef CONFIG_DEBUG_PAGEALLOC
diff --git a/include/linux/mm_inline.h b/include/linux/mm_inline.h
index 6f2fef7..219bef4 100644
--- a/include/linux/mm_inline.h
+++ b/include/linux/mm_inline.h
@@ -6,19 +6,20 @@
 #include <linux/swap.h>
 
 /**
- * page_is_file_cache - should the page be on a file LRU or anon LRU?
+ * page_is_file_lru - should the page be on a file LRU or anon LRU?
  * @page: the page to test
  *
- * Returns 1 if @page is page cache page backed by a regular filesystem,
- * or 0 if @page is anonymous, tmpfs or otherwise ram or swap backed.
- * Used by functions that manipulate the LRU lists, to sort a page
- * onto the right LRU list.
+ * Returns 1 if @page is a regular filesystem backed page cache page or a lazily
+ * freed anonymous page (e.g. via MADV_FREE).  Returns 0 if @page is a normal
+ * anonymous page, a tmpfs page or otherwise ram or swap backed page.  Used by
+ * functions that manipulate the LRU lists, to sort a page onto the right LRU
+ * list.
  *
  * We would like to get this info without a page flag, but the state
  * needs to survive until the page is last deleted from the LRU, which
  * could be as far down as __page_cache_release.
  */
-static inline int page_is_file_cache(struct page *page)
+static inline int page_is_file_lru(struct page *page)
 {
 	return !PageSwapBacked(page);
 }
@@ -75,7 +76,7 @@ static __always_inline void del_page_from_lru_list(struct page *page,
  */
 static inline enum lru_list page_lru_base_type(struct page *page)
 {
-	if (page_is_file_cache(page))
+	if (page_is_file_lru(page))
 		return LRU_INACTIVE_FILE;
 	return LRU_INACTIVE_ANON;
 }
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
index dd555e6..4aba6c0 100644
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -289,8 +289,8 @@ struct vm_userfaultfd_ctx {};
 #endif /* CONFIG_USERFAULTFD */
 
 /*
- * This struct defines a memory VMM memory area. There is one of these
- * per VM-area/task.  A VM area is any part of the process virtual memory
+ * This struct describes a virtual memory area. There is one of these
+ * per VM-area/task. A VM area is any part of the process virtual memory
  * space that has a special rule for the page-fault handlers (ie a shared
  * library, the executable area etc).
  */
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index e84d448..1b9de7d 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -100,41 +100,6 @@ struct free_area {
 	unsigned long		nr_free;
 };
 
-/* Used for pages not on another list */
-static inline void add_to_free_area(struct page *page, struct free_area *area,
-			     int migratetype)
-{
-	list_add(&page->lru, &area->free_list[migratetype]);
-	area->nr_free++;
-}
-
-/* Used for pages not on another list */
-static inline void add_to_free_area_tail(struct page *page, struct free_area *area,
-				  int migratetype)
-{
-	list_add_tail(&page->lru, &area->free_list[migratetype]);
-	area->nr_free++;
-}
-
-#ifdef CONFIG_SHUFFLE_PAGE_ALLOCATOR
-/* Used to preserve page allocation order entropy */
-void add_to_free_area_random(struct page *page, struct free_area *area,
-		int migratetype);
-#else
-static inline void add_to_free_area_random(struct page *page,
-		struct free_area *area, int migratetype)
-{
-	add_to_free_area(page, area, migratetype);
-}
-#endif
-
-/* Used for pages which are on another list */
-static inline void move_to_free_area(struct page *page, struct free_area *area,
-			     int migratetype)
-{
-	list_move(&page->lru, &area->free_list[migratetype]);
-}
-
 static inline struct page *get_page_from_free_area(struct free_area *area,
 					    int migratetype)
 {
@@ -142,15 +107,6 @@ static inline struct page *get_page_from_free_area(struct free_area *area,
 					struct page, lru);
 }
 
-static inline void del_page_from_free_area(struct page *page,
-		struct free_area *area)
-{
-	list_del(&page->lru);
-	__ClearPageBuddy(page);
-	set_page_private(page, 0);
-	area->nr_free--;
-}
-
 static inline bool free_area_empty(struct free_area *area, int migratetype)
 {
 	return list_empty(&area->free_list[migratetype]);
@@ -708,7 +664,6 @@ struct deferred_split {
  * Memory statistics and page replacement data structures are maintained on a
  * per-zone basis.
  */
-struct bootmem_data;
 typedef struct pglist_data {
 	struct zone node_zones[MAX_NR_ZONES];
 	struct zonelist node_zonelists[MAX_ZONELISTS];
@@ -1172,6 +1127,7 @@ static inline unsigned long section_nr_to_pfn(unsigned long sec)
 #define SECTION_ALIGN_DOWN(pfn)	((pfn) & PAGE_SECTION_MASK)
 
 #define SUBSECTION_SHIFT 21
+#define SUBSECTION_SIZE (1UL << SUBSECTION_SHIFT)
 
 #define PFN_SUBSECTION_SHIFT (SUBSECTION_SHIFT - PAGE_SHIFT)
 #define PAGES_PER_SUBSECTION (1UL << PFN_SUBSECTION_SHIFT)
@@ -1187,7 +1143,9 @@ static inline unsigned long section_nr_to_pfn(unsigned long sec)
 #define SUBSECTION_ALIGN_DOWN(pfn) ((pfn) & PAGE_SUBSECTION_MASK)
 
 struct mem_section_usage {
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
 	DECLARE_BITMAP(subsection_map, SUBSECTIONS_PER_SECTION);
+#endif
 	/* See declaration of similar field in struct zone */
 	unsigned long pageblock_flags[0];
 };
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index f8b66d4..4c2ddd0 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -819,4 +819,17 @@ struct wmi_device_id {
 	const void *context;
 };
 
+#define MHI_DEVICE_MODALIAS_FMT "mhi:%s"
+#define MHI_NAME_SIZE 32
+
+/**
+ * struct mhi_device_id - MHI device identification
+ * @chan: MHI channel name
+ * @driver_data: driver data;
+ */
+struct mhi_device_id {
+	const char chan[MHI_NAME_SIZE];
+	kernel_ulong_t driver_data;
+};
+
 #endif /* LINUX_MOD_DEVICETABLE_H */
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 249e8d9..2d1f4a6 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -8,6 +8,7 @@
 
 #include <linux/types.h>
 #include <linux/uio.h>
+#include <linux/list.h>
 #include <linux/notifier.h>
 #include <linux/device.h>
 #include <linux/of.h>
@@ -194,10 +195,43 @@ struct mtd_debug_info {
 	const char *partid;
 };
 
+/**
+ * struct mtd_part - MTD partition specific fields
+ *
+ * @node: list node used to add an MTD partition to the parent partition list
+ * @offset: offset of the partition relatively to the parent offset
+ * @flags: original flags (before the mtdpart logic decided to tweak them based
+ *	   on flash constraints, like eraseblock/pagesize alignment)
+ *
+ * This struct is embedded in mtd_info and contains partition-specific
+ * properties/fields.
+ */
+struct mtd_part {
+	struct list_head node;
+	u64 offset;
+	u32 flags;
+};
+
+/**
+ * struct mtd_master - MTD master specific fields
+ *
+ * @partitions_lock: lock protecting accesses to the partition list. Protects
+ *		     not only the master partition list, but also all
+ *		     sub-partitions.
+ * @suspended: et to 1 when the device is suspended, 0 otherwise
+ *
+ * This struct is embedded in mtd_info and contains master-specific
+ * properties/fields. The master is the root MTD device from the MTD partition
+ * point of view.
+ */
+struct mtd_master {
+	struct mutex partitions_lock;
+	unsigned int suspended : 1;
+};
+
 struct mtd_info {
 	u_char type;
 	uint32_t flags;
-	uint32_t orig_flags; /* Flags as before running mtd checks */
 	uint64_t size;	 // Total size of the MTD
 
 	/* "Major" erase size for the device. Naïve users may take this
@@ -339,8 +373,52 @@ struct mtd_info {
 	int usecount;
 	struct mtd_debug_info dbg;
 	struct nvmem_device *nvmem;
+
+	/*
+	 * Parent device from the MTD partition point of view.
+	 *
+	 * MTD masters do not have any parent, MTD partitions do. The parent
+	 * MTD device can itself be a partition.
+	 */
+	struct mtd_info *parent;
+
+	/* List of partitions attached to this MTD device */
+	struct list_head partitions;
+
+	union {
+		struct mtd_part part;
+		struct mtd_master master;
+	};
 };
 
+static inline struct mtd_info *mtd_get_master(struct mtd_info *mtd)
+{
+	while (mtd->parent)
+		mtd = mtd->parent;
+
+	return mtd;
+}
+
+static inline u64 mtd_get_master_ofs(struct mtd_info *mtd, u64 ofs)
+{
+	while (mtd->parent) {
+		ofs += mtd->part.offset;
+		mtd = mtd->parent;
+	}
+
+	return ofs;
+}
+
+static inline bool mtd_is_partition(const struct mtd_info *mtd)
+{
+	return mtd->parent;
+}
+
+static inline bool mtd_has_partitions(const struct mtd_info *mtd)
+{
+	return !list_empty(&mtd->partitions);
+}
+
 int mtd_ooblayout_ecc(struct mtd_info *mtd, int section,
 		      struct mtd_oob_region *oobecc);
 int mtd_ooblayout_find_eccregion(struct mtd_info *mtd, int eccbyte,
@@ -392,13 +470,16 @@ static inline u32 mtd_oobavail(struct mtd_info *mtd, struct mtd_oob_ops *ops)
 static inline int mtd_max_bad_blocks(struct mtd_info *mtd,
 				     loff_t ofs, size_t len)
 {
-	if (!mtd->_max_bad_blocks)
+	struct mtd_info *master = mtd_get_master(mtd);
+
+	if (!master->_max_bad_blocks)
 		return -ENOTSUPP;
 
 	if (mtd->size < (len + ofs) || ofs < 0)
 		return -EINVAL;
 
-	return mtd->_max_bad_blocks(mtd, ofs, len);
+	return master->_max_bad_blocks(master, mtd_get_master_ofs(mtd, ofs),
+				       len);
 }
 
 int mtd_wunit_to_pairing_info(struct mtd_info *mtd, int wunit,
@@ -439,8 +520,10 @@ int mtd_writev(struct mtd_info *mtd, const struct kvec *vecs,
 
 static inline void mtd_sync(struct mtd_info *mtd)
 {
-	if (mtd->_sync)
-		mtd->_sync(mtd);
+	struct mtd_info *master = mtd_get_master(mtd);
+
+	if (master->_sync)
+		master->_sync(master);
 }
 
 int mtd_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
@@ -452,13 +535,31 @@ int mtd_block_markbad(struct mtd_info *mtd, loff_t ofs);
 
 static inline int mtd_suspend(struct mtd_info *mtd)
 {
-	return mtd->_suspend ? mtd->_suspend(mtd) : 0;
+	struct mtd_info *master = mtd_get_master(mtd);
+	int ret;
+
+	if (master->master.suspended)
+		return 0;
+
+	ret = master->_suspend ? master->_suspend(master) : 0;
+	if (ret)
+		return ret;
+
+	master->master.suspended = 1;
+	return 0;
 }
 
 static inline void mtd_resume(struct mtd_info *mtd)
 {
-	if (mtd->_resume)
-		mtd->_resume(mtd);
+	struct mtd_info *master = mtd_get_master(mtd);
+
+	if (!master->master.suspended)
+		return;
+
+	if (master->_resume)
+		master->_resume(master);
+
+	master->master.suspended = 0;
 }
 
 static inline uint32_t mtd_div_by_eb(uint64_t sz, struct mtd_info *mtd)
@@ -538,7 +639,9 @@ static inline loff_t mtd_wunit_to_offset(struct mtd_info *mtd, loff_t base,
 
 static inline int mtd_has_oob(const struct mtd_info *mtd)
 {
-	return mtd->_read_oob && mtd->_write_oob;
+	struct mtd_info *master = mtd_get_master((struct mtd_info *)mtd);
+
+	return master->_read_oob && master->_write_oob;
 }
 
 static inline int mtd_type_is_nand(const struct mtd_info *mtd)
@@ -548,7 +651,9 @@ static inline int mtd_type_is_nand(const struct mtd_info *mtd)
 
 static inline int mtd_can_have_bb(const struct mtd_info *mtd)
 {
-	return !!mtd->_block_isbad;
+	struct mtd_info *master = mtd_get_master((struct mtd_info *)mtd);
+
+	return !!master->_block_isbad;
 }
 
 	/* Kernel-side ioctl definitions */
diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h
index 11cb0c5..e545c050 100644
--- a/include/linux/mtd/partitions.h
+++ b/include/linux/mtd/partitions.h
@@ -105,7 +105,6 @@ extern void deregister_mtd_parser(struct mtd_part_parser *parser);
 	module_driver(__mtd_part_parser, register_mtd_parser, \
 		      deregister_mtd_parser)
 
-int mtd_is_partition(const struct mtd_info *mtd);
 int mtd_add_partition(struct mtd_info *master, const char *name,
 		      long long offset, long long length);
 int mtd_del_partition(struct mtd_info *master, int partno);
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index 4ab9bcc..1e76196 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -1064,6 +1064,8 @@ struct nand_legacy {
  * @lock:		lock protecting the suspended field. Also used to
  *			serialize accesses to the NAND device.
  * @suspended:		set to 1 when the device is suspended, 0 when it's not.
+ * @suspend:		[REPLACEABLE] specific NAND device suspend operation
+ * @resume:		[REPLACEABLE] specific NAND device resume operation
  * @bbt:		[INTERN] bad block table pointer
  * @bbt_td:		[REPLACEABLE] bad block table descriptor for flash
  *			lookup.
@@ -1077,6 +1079,8 @@ struct nand_legacy {
  * @manufacturer:	[INTERN] Contains manufacturer information
  * @manufacturer.desc:	[INTERN] Contains manufacturer's description
  * @manufacturer.priv:	[INTERN] Contains manufacturer private information
+ * @lock_area:		[REPLACEABLE] specific NAND chip lock operation
+ * @unlock_area:	[REPLACEABLE] specific NAND chip unlock operation
  */
 
 struct nand_chip {
@@ -1117,6 +1121,8 @@ struct nand_chip {
 
 	struct mutex lock;
 	unsigned int suspended : 1;
+	int (*suspend)(struct nand_chip *chip);
+	void (*resume)(struct nand_chip *chip);
 
 	uint8_t *oob_poi;
 	struct nand_controller *controller;
@@ -1136,6 +1142,9 @@ struct nand_chip {
 		const struct nand_manufacturer *desc;
 		void *priv;
 	} manufacturer;
+
+	int (*lock_area)(struct nand_chip *chip, loff_t ofs, uint64_t len);
+	int (*unlock_area)(struct nand_chip *chip, loff_t ofs, uint64_t len);
 };
 
 extern const struct mtd_ooblayout_ops nand_ooblayout_sp_ops;
@@ -1215,7 +1224,7 @@ static inline struct device_node *nand_get_flash_node(struct nand_chip *chip)
  * struct nand_flash_dev - NAND Flash Device ID Structure
  * @name: a human-readable name of the NAND chip
  * @dev_id: the device ID (the second byte of the full chip ID array)
- * @mfr_id: manufecturer ID part of the full chip ID array (refers the same
+ * @mfr_id: manufacturer ID part of the full chip ID array (refers the same
  *          memory address as ``id[0]``)
  * @dev_id: device ID part of the full chip ID array (refers the same memory
  *          address as ``id[1]``)
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index 5abd91c..1e2af0e 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -12,23 +12,6 @@
 #include <linux/spi/spi-mem.h>
 
 /*
- * Manufacturer IDs
- *
- * The first byte returned from the flash after sending opcode SPINOR_OP_RDID.
- * Sometimes these are the same as CFI IDs, but sometimes they aren't.
- */
-#define SNOR_MFR_ATMEL		CFI_MFR_ATMEL
-#define SNOR_MFR_GIGADEVICE	0xc8
-#define SNOR_MFR_INTEL		CFI_MFR_INTEL
-#define SNOR_MFR_ST		CFI_MFR_ST	/* ST Micro */
-#define SNOR_MFR_MICRON		CFI_MFR_MICRON	/* Micron */
-#define SNOR_MFR_ISSI		CFI_MFR_PMC
-#define SNOR_MFR_MACRONIX	CFI_MFR_MACRONIX
-#define SNOR_MFR_SPANSION	CFI_MFR_AMD
-#define SNOR_MFR_SST		CFI_MFR_SST
-#define SNOR_MFR_WINBOND	0xef /* Also used by some Spansion */
-
-/*
  * Note on opcode nomenclature: some opcodes have a format like
  * SPINOR_OP_FUNCTION{4,}_x_y_z. The numbers x, y, and z stand for the number
  * of I/O lines used for the opcode, address, and data (respectively). The
@@ -128,7 +111,9 @@
 #define SR_BP0			BIT(2)	/* Block protect 0 */
 #define SR_BP1			BIT(3)	/* Block protect 1 */
 #define SR_BP2			BIT(4)	/* Block protect 2 */
+#define SR_BP3			BIT(5)	/* Block protect 3 */
 #define SR_TB_BIT5		BIT(5)	/* Top/Bottom protect */
+#define SR_BP3_BIT6		BIT(6)	/* Block protect 3 */
 #define SR_TB_BIT6		BIT(6)	/* Top/Bottom protect */
 #define SR_SRWD			BIT(7)	/* SR write protect */
 /* Spansion/Cypress specific status bits */
@@ -137,6 +122,8 @@
 
 #define SR1_QUAD_EN_BIT6	BIT(6)
 
+#define SR_BP_SHIFT		2
+
 /* Enhanced Volatile Configuration Register bits */
 #define EVCR_QUAD_EN_MICRON	BIT(7)	/* Micron Quad I/O */
 
@@ -225,110 +212,6 @@ static inline u8 spi_nor_get_protocol_width(enum spi_nor_protocol proto)
 	return spi_nor_get_protocol_data_nbits(proto);
 }
 
-enum spi_nor_option_flags {
-	SNOR_F_USE_FSR		= BIT(0),
-	SNOR_F_HAS_SR_TB	= BIT(1),
-	SNOR_F_NO_OP_CHIP_ERASE	= BIT(2),
-	SNOR_F_READY_XSR_RDY	= BIT(3),
-	SNOR_F_USE_CLSR		= BIT(4),
-	SNOR_F_BROKEN_RESET	= BIT(5),
-	SNOR_F_4B_OPCODES	= BIT(6),
-	SNOR_F_HAS_4BAIT	= BIT(7),
-	SNOR_F_HAS_LOCK		= BIT(8),
-	SNOR_F_HAS_16BIT_SR	= BIT(9),
-	SNOR_F_NO_READ_CR	= BIT(10),
-	SNOR_F_HAS_SR_TB_BIT6	= BIT(11),
-
-};
-
-/**
- * struct spi_nor_erase_type - Structure to describe a SPI NOR erase type
- * @size:		the size of the sector/block erased by the erase type.
- *			JEDEC JESD216B imposes erase sizes to be a power of 2.
- * @size_shift:		@size is a power of 2, the shift is stored in
- *			@size_shift.
- * @size_mask:		the size mask based on @size_shift.
- * @opcode:		the SPI command op code to erase the sector/block.
- * @idx:		Erase Type index as sorted in the Basic Flash Parameter
- *			Table. It will be used to synchronize the supported
- *			Erase Types with the ones identified in the SFDP
- *			optional tables.
- */
-struct spi_nor_erase_type {
-	u32	size;
-	u32	size_shift;
-	u32	size_mask;
-	u8	opcode;
-	u8	idx;
-};
-
-/**
- * struct spi_nor_erase_command - Used for non-uniform erases
- * The structure is used to describe a list of erase commands to be executed
- * once we validate that the erase can be performed. The elements in the list
- * are run-length encoded.
- * @list:		for inclusion into the list of erase commands.
- * @count:		how many times the same erase command should be
- *			consecutively used.
- * @size:		the size of the sector/block erased by the command.
- * @opcode:		the SPI command op code to erase the sector/block.
- */
-struct spi_nor_erase_command {
-	struct list_head	list;
-	u32			count;
-	u32			size;
-	u8			opcode;
-};
-
-/**
- * struct spi_nor_erase_region - Structure to describe a SPI NOR erase region
- * @offset:		the offset in the data array of erase region start.
- *			LSB bits are used as a bitmask encoding flags to
- *			determine if this region is overlaid, if this region is
- *			the last in the SPI NOR flash memory and to indicate
- *			all the supported erase commands inside this region.
- *			The erase types are sorted in ascending order with the
- *			smallest Erase Type size being at BIT(0).
- * @size:		the size of the region in bytes.
- */
-struct spi_nor_erase_region {
-	u64		offset;
-	u64		size;
-};
-
-#define SNOR_ERASE_TYPE_MAX	4
-#define SNOR_ERASE_TYPE_MASK	GENMASK_ULL(SNOR_ERASE_TYPE_MAX - 1, 0)
-
-#define SNOR_LAST_REGION	BIT(4)
-#define SNOR_OVERLAID_REGION	BIT(5)
-
-#define SNOR_ERASE_FLAGS_MAX	6
-#define SNOR_ERASE_FLAGS_MASK	GENMASK_ULL(SNOR_ERASE_FLAGS_MAX - 1, 0)
-
-/**
- * struct spi_nor_erase_map - Structure to describe the SPI NOR erase map
- * @regions:		array of erase regions. The regions are consecutive in
- *			address space. Walking through the regions is done
- *			incrementally.
- * @uniform_region:	a pre-allocated erase region for SPI NOR with a uniform
- *			sector size (legacy implementation).
- * @erase_type:		an array of erase types shared by all the regions.
- *			The erase types are sorted in ascending order, with the
- *			smallest Erase Type size being the first member in the
- *			erase_type array.
- * @uniform_erase_type:	bitmask encoding erase types that can erase the
- *			entire memory. This member is completed at init by
- *			uniform and non-uniform SPI NOR flash memories if they
- *			support at least one erase type that can erase the
- *			entire memory.
- */
-struct spi_nor_erase_map {
-	struct spi_nor_erase_region	*regions;
-	struct spi_nor_erase_region	uniform_region;
-	struct spi_nor_erase_type	erase_type[SNOR_ERASE_TYPE_MAX];
-	u8				uniform_erase_type;
-};
-
 /**
  * struct spi_nor_hwcaps - Structure for describing the hardware capabilies
  * supported by the SPI controller (bus master).
@@ -404,61 +287,7 @@ struct spi_nor_hwcaps {
 #define SNOR_HWCAPS_ALL		(SNOR_HWCAPS_READ_MASK |	\
 				 SNOR_HWCAPS_PP_MASK)
 
-struct spi_nor_read_command {
-	u8			num_mode_clocks;
-	u8			num_wait_states;
-	u8			opcode;
-	enum spi_nor_protocol	proto;
-};
-
-struct spi_nor_pp_command {
-	u8			opcode;
-	enum spi_nor_protocol	proto;
-};
-
-enum spi_nor_read_command_index {
-	SNOR_CMD_READ,
-	SNOR_CMD_READ_FAST,
-	SNOR_CMD_READ_1_1_1_DTR,
-
-	/* Dual SPI */
-	SNOR_CMD_READ_1_1_2,
-	SNOR_CMD_READ_1_2_2,
-	SNOR_CMD_READ_2_2_2,
-	SNOR_CMD_READ_1_2_2_DTR,
-
-	/* Quad SPI */
-	SNOR_CMD_READ_1_1_4,
-	SNOR_CMD_READ_1_4_4,
-	SNOR_CMD_READ_4_4_4,
-	SNOR_CMD_READ_1_4_4_DTR,
-
-	/* Octal SPI */
-	SNOR_CMD_READ_1_1_8,
-	SNOR_CMD_READ_1_8_8,
-	SNOR_CMD_READ_8_8_8,
-	SNOR_CMD_READ_1_8_8_DTR,
-
-	SNOR_CMD_READ_MAX
-};
-
-enum spi_nor_pp_command_index {
-	SNOR_CMD_PP,
-
-	/* Quad SPI */
-	SNOR_CMD_PP_1_1_4,
-	SNOR_CMD_PP_1_4_4,
-	SNOR_CMD_PP_4_4_4,
-
-	/* Octal SPI */
-	SNOR_CMD_PP_1_1_8,
-	SNOR_CMD_PP_1_8_8,
-	SNOR_CMD_PP_8_8_8,
-
-	SNOR_CMD_PP_MAX
-};
-
-/* Forward declaration that will be used in 'struct spi_nor_flash_parameter' */
+/* Forward declaration that is used in 'struct spi_nor_controller_ops' */
 struct spi_nor;
 
 /**
@@ -489,68 +318,13 @@ struct spi_nor_controller_ops {
 	int (*erase)(struct spi_nor *nor, loff_t offs);
 };
 
-/**
- * struct spi_nor_locking_ops - SPI NOR locking methods
- * @lock:	lock a region of the SPI NOR.
- * @unlock:	unlock a region of the SPI NOR.
- * @is_locked:	check if a region of the SPI NOR is completely locked
- */
-struct spi_nor_locking_ops {
-	int (*lock)(struct spi_nor *nor, loff_t ofs, uint64_t len);
-	int (*unlock)(struct spi_nor *nor, loff_t ofs, uint64_t len);
-	int (*is_locked)(struct spi_nor *nor, loff_t ofs, uint64_t len);
-};
-
-/**
- * struct spi_nor_flash_parameter - SPI NOR flash parameters and settings.
- * Includes legacy flash parameters and settings that can be overwritten
- * by the spi_nor_fixups hooks, or dynamically when parsing the JESD216
- * Serial Flash Discoverable Parameters (SFDP) tables.
- *
- * @size:		the flash memory density in bytes.
- * @page_size:		the page size of the SPI NOR flash memory.
- * @hwcaps:		describes the read and page program hardware
- *			capabilities.
- * @reads:		read capabilities ordered by priority: the higher index
- *                      in the array, the higher priority.
- * @page_programs:	page program capabilities ordered by priority: the
- *                      higher index in the array, the higher priority.
- * @erase_map:		the erase map parsed from the SFDP Sector Map Parameter
- *                      Table.
- * @quad_enable:	enables SPI NOR quad mode.
- * @set_4byte:		puts the SPI NOR in 4 byte addressing mode.
- * @convert_addr:	converts an absolute address into something the flash
- *                      will understand. Particularly useful when pagesize is
- *                      not a power-of-2.
- * @setup:              configures the SPI NOR memory. Useful for SPI NOR
- *                      flashes that have peculiarities to the SPI NOR standard
- *                      e.g. different opcodes, specific address calculation,
- *                      page size, etc.
- * @locking_ops:	SPI NOR locking methods.
- */
-struct spi_nor_flash_parameter {
-	u64				size;
-	u32				page_size;
-
-	struct spi_nor_hwcaps		hwcaps;
-	struct spi_nor_read_command	reads[SNOR_CMD_READ_MAX];
-	struct spi_nor_pp_command	page_programs[SNOR_CMD_PP_MAX];
-
-	struct spi_nor_erase_map        erase_map;
-
-	int (*quad_enable)(struct spi_nor *nor);
-	int (*set_4byte)(struct spi_nor *nor, bool enable);
-	u32 (*convert_addr)(struct spi_nor *nor, u32 addr);
-	int (*setup)(struct spi_nor *nor, const struct spi_nor_hwcaps *hwcaps);
-
-	const struct spi_nor_locking_ops *locking_ops;
-};
-
-/**
- * struct flash_info - Forward declaration of a structure used internally by
- *		       spi_nor_scan()
+/*
+ * Forward declarations that are used internally by the core and manufacturer
+ * drivers.
  */
 struct flash_info;
+struct spi_nor_manufacturer;
+struct spi_nor_flash_parameter;
 
 /**
  * struct spi_nor - Structure for defining a the SPI NOR layer
@@ -562,6 +336,7 @@ struct flash_info;
  *                      layer is not DMA-able
  * @bouncebuf_size:	size of the bounce buffer
  * @info:		spi-nor part JDEC MFR id and other info
+ * @manufacturer:	spi-nor manufacturer
  * @page_size:		the page size of the SPI NOR
  * @addr_width:		number of address bytes
  * @erase_opcode:	the opcode for erasing a sector
@@ -578,6 +353,7 @@ struct flash_info;
  *                      The structure includes legacy flash parameters and
  *                      settings that can be overwritten by the spi_nor_fixups
  *                      hooks, or dynamically when parsing the SFDP tables.
+ * @dirmap:		pointers to struct spi_mem_dirmap_desc for reads/writes.
  * @priv:		the private data
  */
 struct spi_nor {
@@ -588,6 +364,7 @@ struct spi_nor {
 	u8			*bouncebuf;
 	size_t			bouncebuf_size;
 	const struct flash_info	*info;
+	const struct spi_nor_manufacturer *manufacturer;
 	u32			page_size;
 	u8			addr_width;
 	u8			erase_opcode;
@@ -602,40 +379,16 @@ struct spi_nor {
 
 	const struct spi_nor_controller_ops *controller_ops;
 
-	struct spi_nor_flash_parameter params;
+	struct spi_nor_flash_parameter *params;
+
+	struct {
+		struct spi_mem_dirmap_desc *rdesc;
+		struct spi_mem_dirmap_desc *wdesc;
+	} dirmap;
 
 	void *priv;
 };
 
-static u64 __maybe_unused
-spi_nor_region_is_last(const struct spi_nor_erase_region *region)
-{
-	return region->offset & SNOR_LAST_REGION;
-}
-
-static u64 __maybe_unused
-spi_nor_region_end(const struct spi_nor_erase_region *region)
-{
-	return (region->offset & ~SNOR_ERASE_FLAGS_MASK) + region->size;
-}
-
-static void __maybe_unused
-spi_nor_region_mark_end(struct spi_nor_erase_region *region)
-{
-	region->offset |= SNOR_LAST_REGION;
-}
-
-static void __maybe_unused
-spi_nor_region_mark_overlay(struct spi_nor_erase_region *region)
-{
-	region->offset |= SNOR_OVERLAID_REGION;
-}
-
-static bool __maybe_unused spi_nor_has_uniform_erase(const struct spi_nor *nor)
-{
-	return !!nor->params.erase_map.uniform_erase_type;
-}
-
 static inline void spi_nor_set_flash_node(struct spi_nor *nor,
 					  struct device_node *np)
 {
diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
index 4ea558b..1077c45 100644
--- a/include/linux/mtd/spinand.h
+++ b/include/linux/mtd/spinand.h
@@ -32,9 +32,9 @@
 		   SPI_MEM_OP_NO_DUMMY,					\
 		   SPI_MEM_OP_NO_DATA)
 
-#define SPINAND_READID_OP(ndummy, buf, len)				\
+#define SPINAND_READID_OP(naddr, ndummy, buf, len)			\
 	SPI_MEM_OP(SPI_MEM_OP_CMD(0x9f, 1),				\
-		   SPI_MEM_OP_NO_ADDR,					\
+		   SPI_MEM_OP_ADDR(naddr, 0, 1),			\
 		   SPI_MEM_OP_DUMMY(ndummy, 1),				\
 		   SPI_MEM_OP_DATA_IN(len, buf, 1))
 
@@ -176,37 +176,46 @@ struct spinand_device;
  * @data: buffer containing the id bytes. Currently 4 bytes large, but can
  *	  be extended if required
  * @len: ID length
- *
- * struct_spinand_id->data contains all bytes returned after a READ_ID command,
- * including dummy bytes if the chip does not emit ID bytes right after the
- * READ_ID command. The responsibility to extract real ID bytes is left to
- * struct_manufacurer_ops->detect().
  */
 struct spinand_id {
 	u8 data[SPINAND_MAX_ID_LEN];
 	int len;
 };
 
+enum spinand_readid_method {
+	SPINAND_READID_METHOD_OPCODE,
+	SPINAND_READID_METHOD_OPCODE_ADDR,
+	SPINAND_READID_METHOD_OPCODE_DUMMY,
+};
+
+/**
+ * struct spinand_devid - SPI NAND device id structure
+ * @id: device id of current chip
+ * @len: number of bytes in device id
+ * @method: method to read chip id
+ *	    There are 3 possible variants:
+ *	    SPINAND_READID_METHOD_OPCODE: chip id is returned immediately
+ *	    after read_id opcode.
+ *	    SPINAND_READID_METHOD_OPCODE_ADDR: chip id is returned after
+ *	    read_id opcode + 1-byte address.
+ *	    SPINAND_READID_METHOD_OPCODE_DUMMY: chip id is returned after
+ *	    read_id opcode + 1 dummy byte.
+ */
+struct spinand_devid {
+	const u8 *id;
+	const u8 len;
+	const enum spinand_readid_method method;
+};
+
 /**
  * struct manufacurer_ops - SPI NAND manufacturer specific operations
- * @detect: detect a SPI NAND device. Every time a SPI NAND device is probed
- *	    the core calls the struct_manufacurer_ops->detect() hook of each
- *	    registered manufacturer until one of them return 1. Note that
- *	    the first thing to check in this hook is that the manufacturer ID
- *	    in struct_spinand_device->id matches the manufacturer whose
- *	    ->detect() hook has been called. Should return 1 if there's a
- *	    match, 0 if the manufacturer ID does not match and a negative
- *	    error code otherwise. When true is returned, the core assumes
- *	    that properties of the NAND chip (spinand->base.memorg and
- *	    spinand->base.eccreq) have been filled
  * @init: initialize a SPI NAND device
  * @cleanup: cleanup a SPI NAND device
  *
  * Each SPI NAND manufacturer driver should implement this interface so that
- * NAND chips coming from this vendor can be detected and initialized properly.
+ * NAND chips coming from this vendor can be initialized properly.
  */
 struct spinand_manufacturer_ops {
-	int (*detect)(struct spinand_device *spinand);
 	int (*init)(struct spinand_device *spinand);
 	void (*cleanup)(struct spinand_device *spinand);
 };
@@ -215,11 +224,16 @@ struct spinand_manufacturer_ops {
  * struct spinand_manufacturer - SPI NAND manufacturer instance
  * @id: manufacturer ID
  * @name: manufacturer name
+ * @devid_len: number of bytes in device ID
+ * @chips: supported SPI NANDs under current manufacturer
+ * @nchips: number of SPI NANDs available in chips array
  * @ops: manufacturer operations
  */
 struct spinand_manufacturer {
 	u8 id;
 	char *name;
+	const struct spinand_info *chips;
+	const size_t nchips;
 	const struct spinand_manufacturer_ops *ops;
 };
 
@@ -270,6 +284,7 @@ struct spinand_ecc_info {
 };
 
 #define SPINAND_HAS_QE_BIT		BIT(0)
+#define SPINAND_HAS_CR_FEAT_BIT		BIT(1)
 
 /**
  * struct spinand_info - Structure used to describe SPI NAND chips
@@ -291,7 +306,7 @@ struct spinand_ecc_info {
  */
 struct spinand_info {
 	const char *model;
-	u16 devid;
+	struct spinand_devid devid;
 	u32 flags;
 	struct nand_memory_organization memorg;
 	struct nand_ecc_req eccreq;
@@ -305,6 +320,13 @@ struct spinand_info {
 			     unsigned int target);
 };
 
+#define SPINAND_ID(__method, ...)					\
+	{								\
+		.id = (const u8[]){ __VA_ARGS__ },			\
+		.len = sizeof((u8[]){ __VA_ARGS__ }),			\
+		.method = __method,					\
+	}
+
 #define SPINAND_INFO_OP_VARIANTS(__read, __write, __update)		\
 	{								\
 		.read_cache = __read,					\
@@ -451,9 +473,10 @@ static inline void spinand_set_of_node(struct spinand_device *spinand,
 	nanddev_set_of_node(&spinand->base, np);
 }
 
-int spinand_match_and_init(struct spinand_device *dev,
+int spinand_match_and_init(struct spinand_device *spinand,
 			   const struct spinand_info *table,
-			   unsigned int table_size, u16 devid);
+			   unsigned int table_size,
+			   enum spinand_readid_method rdid_method);
 
 int spinand_upd_cfg(struct spinand_device *spinand, u8 mask, u8 val);
 int spinand_select_target(struct spinand_device *spinand, unsigned int target);
diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h
index 5d5b91e..73eda45 100644
--- a/include/linux/nfs_fs.h
+++ b/include/linux/nfs_fs.h
@@ -354,6 +354,7 @@ static inline unsigned long nfs_save_change_attribute(struct inode *dir)
 extern int nfs_sync_mapping(struct address_space *mapping);
 extern void nfs_zap_mapping(struct inode *inode, struct address_space *mapping);
 extern void nfs_zap_caches(struct inode *);
+extern void nfs_set_inode_stale(struct inode *inode);
 extern void nfs_invalidate_atime(struct inode *);
 extern struct inode *nfs_fhget(struct super_block *, struct nfs_fh *,
 				struct nfs_fattr *, struct nfs4_label *);
diff --git a/include/linux/nfs_page.h b/include/linux/nfs_page.h
index 0bbd587..c32c152 100644
--- a/include/linux/nfs_page.h
+++ b/include/linux/nfs_page.h
@@ -139,9 +139,14 @@ extern size_t nfs_generic_pg_test(struct nfs_pageio_descriptor *desc,
 extern  int nfs_wait_on_request(struct nfs_page *);
 extern	void nfs_unlock_request(struct nfs_page *req);
 extern	void nfs_unlock_and_release_request(struct nfs_page *);
+extern	struct nfs_page *nfs_page_group_lock_head(struct nfs_page *req);
+extern	int nfs_page_group_lock_subrequests(struct nfs_page *head);
+extern	void nfs_join_page_group(struct nfs_page *head, struct inode *inode);
 extern int nfs_page_group_lock(struct nfs_page *);
 extern void nfs_page_group_unlock(struct nfs_page *);
 extern bool nfs_page_group_sync_on_bit(struct nfs_page *, unsigned int);
+extern	int nfs_page_set_headlock(struct nfs_page *req);
+extern void nfs_page_clear_headlock(struct nfs_page *req);
 extern bool nfs_async_iocounter_wait(struct rpc_task *, struct nfs_lock_context *);
 
 /*
diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h
index 6838c149..4402304 100644
--- a/include/linux/nfs_xdr.h
+++ b/include/linux/nfs_xdr.h
@@ -1266,16 +1266,25 @@ struct nfstime4 {
 struct pnfs_commit_bucket {
 	struct list_head written;
 	struct list_head committing;
-	struct pnfs_layout_segment *wlseg;
-	struct pnfs_layout_segment *clseg;
+	struct pnfs_layout_segment *lseg;
 	struct nfs_writeverf direct_verf;
 };
 
+struct pnfs_commit_array {
+	struct list_head cinfo_list;
+	struct list_head lseg_list;
+	struct pnfs_layout_segment *lseg;
+	struct rcu_head rcu;
+	refcount_t refcount;
+	unsigned int nbuckets;
+	struct pnfs_commit_bucket buckets[];
+};
+
 struct pnfs_ds_commit_info {
-	int nwritten;
-	int ncommitting;
-	int nbuckets;
-	struct pnfs_commit_bucket *buckets;
+	struct list_head commits;
+	unsigned int nwritten;
+	unsigned int ncommitting;
+	const struct pnfs_commit_ops *ops;
 };
 
 struct nfs41_state_protection {
@@ -1386,22 +1395,11 @@ struct nfs41_free_stateid_res {
 	unsigned int			status;
 };
 
-static inline void
-nfs_free_pnfs_ds_cinfo(struct pnfs_ds_commit_info *cinfo)
-{
-	kfree(cinfo->buckets);
-}
-
 #else
 
 struct pnfs_ds_commit_info {
 };
 
-static inline void
-nfs_free_pnfs_ds_cinfo(struct pnfs_ds_commit_info *cinfo)
-{
-}
-
 #endif /* CONFIG_NFS_V4_1 */
 
 #ifdef CONFIG_NFS_V4_2
diff --git a/include/linux/numa.h b/include/linux/numa.h
index 110b0e5..a42df80 100644
--- a/include/linux/numa.h
+++ b/include/linux/numa.h
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 #ifndef _LINUX_NUMA_H
 #define _LINUX_NUMA_H
-
+#include <linux/types.h>
 
 #ifdef CONFIG_NODES_SHIFT
 #define NODES_SHIFT     CONFIG_NODES_SHIFT
@@ -13,4 +13,32 @@
 
 #define	NUMA_NO_NODE	(-1)
 
+/* optionally keep NUMA memory info available post init */
+#ifdef CONFIG_NUMA_KEEP_MEMINFO
+#define __initdata_or_meminfo
+#else
+#define __initdata_or_meminfo __initdata
+#endif
+
+#ifdef CONFIG_NUMA
+/* Generic implementation available */
+int numa_map_to_online_node(int node);
+
+/*
+ * Optional architecture specific implementation, users need a "depends
+ * on $ARCH"
+ */
+int phys_to_target_node(phys_addr_t addr);
+#else
+static inline int numa_map_to_online_node(int node)
+{
+	return NUMA_NO_NODE;
+}
+
+static inline int phys_to_target_node(phys_addr_t addr)
+{
+	return NUMA_NO_NODE;
+}
+#endif
+
 #endif /* _LINUX_NUMA_H */
diff --git a/include/linux/nvme-fc-driver.h b/include/linux/nvme-fc-driver.h
index 6d0d70f..10f8162 100644
--- a/include/linux/nvme-fc-driver.h
+++ b/include/linux/nvme-fc-driver.h
@@ -270,8 +270,6 @@ struct nvme_fc_remote_port {
  *
  * Host/Initiator Transport Entrypoints/Parameters:
  *
- * @module:  The LLDD module using the interface
- *
  * @localport_delete:  The LLDD initiates deletion of a localport via
  *       nvme_fc_deregister_localport(). However, the teardown is
  *       asynchronous. This routine is called upon the completion of the
@@ -385,8 +383,6 @@ struct nvme_fc_remote_port {
  *       Value is Mandatory. Allowed to be zero.
  */
 struct nvme_fc_port_template {
-	struct module	*module;
-
 	/* initiator-based functions */
 	void	(*localport_delete)(struct nvme_fc_local_port *);
 	void	(*remoteport_delete)(struct nvme_fc_remote_port *);
diff --git a/include/linux/nvmem-consumer.h b/include/linux/nvmem-consumer.h
index d3776be..1b311d2 100644
--- a/include/linux/nvmem-consumer.h
+++ b/include/linux/nvmem-consumer.h
@@ -63,6 +63,7 @@ void *nvmem_cell_read(struct nvmem_cell *cell, size_t *len);
 int nvmem_cell_write(struct nvmem_cell *cell, void *buf, size_t len);
 int nvmem_cell_read_u16(struct device *dev, const char *cell_id, u16 *val);
 int nvmem_cell_read_u32(struct device *dev, const char *cell_id, u32 *val);
+int nvmem_cell_read_u64(struct device *dev, const char *cell_id, u64 *val);
 
 /* direct nvmem device read/write interface */
 struct nvmem_device *nvmem_device_get(struct device *dev, const char *name);
@@ -138,6 +139,12 @@ static inline int nvmem_cell_read_u32(struct device *dev,
 	return -EOPNOTSUPP;
 }
 
+static inline int nvmem_cell_read_u64(struct device *dev,
+				      const char *cell_id, u64 *val)
+{
+	return -EOPNOTSUPP;
+}
+
 static inline struct nvmem_device *nvmem_device_get(struct device *dev,
 						    const char *name)
 {
diff --git a/include/linux/of_address.h b/include/linux/of_address.h
index eac7ab1..763022e 100644
--- a/include/linux/of_address.h
+++ b/include/linux/of_address.h
@@ -10,21 +10,27 @@ struct of_pci_range_parser {
 	struct device_node *node;
 	const __be32 *range;
 	const __be32 *end;
-	int np;
+	int na;
+	int ns;
 	int pna;
 	bool dma;
 };
+#define of_range_parser of_pci_range_parser
 
 struct of_pci_range {
-	u32 pci_space;
-	u64 pci_addr;
+	union {
+		u64 pci_addr;
+		u64 bus_addr;
+	};
 	u64 cpu_addr;
 	u64 size;
 	u32 flags;
 };
+#define of_range of_pci_range
 
 #define for_each_of_pci_range(parser, range) \
 	for (; of_pci_range_parser_one(parser, range);)
+#define for_each_of_range for_each_of_pci_range
 
 /* Translate a DMA address from device space to CPU space */
 extern u64 of_translate_dma_address(struct device_node *dev,
@@ -143,4 +149,3 @@ static inline int of_pci_range_to_resource(struct of_pci_range *range,
 #endif /* CONFIG_OF_ADDRESS && CONFIG_PCI */
 
 #endif /* __OF_ADDRESS_H */
-
diff --git a/include/linux/of_gpio.h b/include/linux/of_gpio.h
index 1696739..f821095 100644
--- a/include/linux/of_gpio.h
+++ b/include/linux/of_gpio.h
@@ -11,9 +11,8 @@
 #define __LINUX_OF_GPIO_H
 
 #include <linux/compiler.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
+#include <linux/gpio.h>		/* FIXME: Shouldn't be here */
 #include <linux/of.h>
 
 struct device_node;
@@ -34,6 +33,8 @@ enum of_gpio_flags {
 
 #ifdef CONFIG_OF_GPIO
 
+#include <linux/kernel.h>
+
 /*
  * OF GPIO chip for memory mapped banks
  */
@@ -63,6 +64,8 @@ extern void of_mm_gpiochip_remove(struct of_mm_gpio_chip *mm_gc);
 
 #else /* CONFIG_OF_GPIO */
 
+#include <linux/errno.h>
+
 /* Drivers may not strictly depend on the GPIO support, so let them link. */
 static inline int of_get_named_gpio_flags(struct device_node *np,
 		const char *list_name, int index, enum of_gpio_flags *flags)
diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h
index 77de28b..222f6f7 100644
--- a/include/linux/page-flags.h
+++ b/include/linux/page-flags.h
@@ -63,6 +63,11 @@
  * page_waitqueue(page) is a wait queue of all tasks waiting for the page
  * to become unlocked.
  *
+ * PG_swapbacked is set when a page uses swap as a backing storage.  This are
+ * usually PageAnon or shmem pages but please note that even anonymous pages
+ * might lose their PG_swapbacked flag when they simply can be dropped (e.g. as
+ * a result of MADV_FREE).
+ *
  * PG_uptodate tells whether the page's contents is valid.  When a read
  * completes, the page becomes uptodate, unless a disk I/O error happened.
  *
@@ -163,6 +168,9 @@ enum pageflags {
 
 	/* non-lru isolated movable page */
 	PG_isolated = PG_reclaim,
+
+	/* Only valid for buddy pages. Used to track pages that are reported */
+	PG_reported = PG_uptodate,
 };
 
 #ifndef __GENERATING_BOUNDS_H
@@ -432,6 +440,14 @@ PAGEFLAG(Idle, idle, PF_ANY)
 #endif
 
 /*
+ * PageReported() is used to track reported free pages within the Buddy
+ * allocator. We can use the non-atomic version of the test and set
+ * operations as both should be shielded with the zone lock to prevent
+ * any possible races on the setting or clearing of the bit.
+ */
+__PAGEFLAG(Reported, reported, PF_NO_COMPOUND)
+
+/*
  * On an anonymous page mapped into a user virtual memory area,
  * page->mapping points to its anon_vma, not to a struct address_space;
  * with the PAGE_MAPPING_ANON bit set to distinguish it.  See rmap.h.
diff --git a/include/linux/page_reporting.h b/include/linux/page_reporting.h
new file mode 100644
index 0000000..3b99e0e
--- /dev/null
+++ b/include/linux/page_reporting.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _LINUX_PAGE_REPORTING_H
+#define _LINUX_PAGE_REPORTING_H
+
+#include <linux/mmzone.h>
+#include <linux/scatterlist.h>
+
+/* This value should always be a power of 2, see page_reporting_cycle() */
+#define PAGE_REPORTING_CAPACITY		32
+
+struct page_reporting_dev_info {
+	/* function that alters pages to make them "reported" */
+	int (*report)(struct page_reporting_dev_info *prdev,
+		      struct scatterlist *sg, unsigned int nents);
+
+	/* work struct for processing reports */
+	struct delayed_work work;
+
+	/* Current state of page reporting */
+	atomic_t state;
+};
+
+/* Tear-down and bring-up for page reporting devices */
+void page_reporting_unregister(struct page_reporting_dev_info *prdev);
+int page_reporting_register(struct page_reporting_dev_info *prdev);
+#endif /*_LINUX_PAGE_REPORTING_H */
diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h
index f562824..a8f7bd8 100644
--- a/include/linux/pagemap.h
+++ b/include/linux/pagemap.h
@@ -341,9 +341,7 @@ static inline struct page *find_subpage(struct page *head, pgoff_t index)
 	if (PageHuge(head))
 		return head;
 
-	VM_BUG_ON_PAGE(PageTail(head), head);
-
-	return head + (index & (compound_nr(head) - 1));
+	return head + (index & (hpage_nr_pages(head) - 1));
 }
 
 struct page *find_get_entry(struct address_space *mapping, pgoff_t offset);
diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h
index 62b7fdc..2d155bf 100644
--- a/include/linux/pci-acpi.h
+++ b/include/linux/pci-acpi.h
@@ -112,6 +112,14 @@ extern const guid_t pci_acpi_dsm_guid;
 #define RESET_DELAY_DSM			0x08
 #define FUNCTION_DELAY_DSM		0x09
 
+#ifdef CONFIG_PCIE_EDR
+void pci_acpi_add_edr_notifier(struct pci_dev *pdev);
+void pci_acpi_remove_edr_notifier(struct pci_dev *pdev);
+#else
+static inline void pci_acpi_add_edr_notifier(struct pci_dev *pdev) { }
+static inline void pci_acpi_remove_edr_notifier(struct pci_dev *pdev) { }
+#endif /* CONFIG_PCIE_EDR */
+
 #else	/* CONFIG_ACPI */
 static inline void acpi_pci_add_bus(struct pci_bus *bus) { }
 static inline void acpi_pci_remove_bus(struct pci_bus *bus) { }
diff --git a/include/linux/pci-epc.h b/include/linux/pci-epc.h
index 56f1846..e0ed9d01 100644
--- a/include/linux/pci-epc.h
+++ b/include/linux/pci-epc.h
@@ -53,7 +53,8 @@ struct pci_epc_ops {
 			      phys_addr_t addr);
 	int	(*set_msi)(struct pci_epc *epc, u8 func_no, u8 interrupts);
 	int	(*get_msi)(struct pci_epc *epc, u8 func_no);
-	int	(*set_msix)(struct pci_epc *epc, u8 func_no, u16 interrupts);
+	int	(*set_msix)(struct pci_epc *epc, u8 func_no, u16 interrupts,
+			    enum pci_barno, u32 offset);
 	int	(*get_msix)(struct pci_epc *epc, u8 func_no);
 	int	(*raise_irq)(struct pci_epc *epc, u8 func_no,
 			     enum pci_epc_irq_type type, u16 interrupt_num);
@@ -71,6 +72,7 @@ struct pci_epc_ops {
  * @bitmap: bitmap to manage the PCI address space
  * @pages: number of bits representing the address region
  * @page_size: size of each page
+ * @lock: mutex to protect bitmap
  */
 struct pci_epc_mem {
 	phys_addr_t	phys_base;
@@ -78,6 +80,8 @@ struct pci_epc_mem {
 	unsigned long	*bitmap;
 	size_t		page_size;
 	int		pages;
+	/* mutex to protect against concurrent access for memory allocation*/
+	struct mutex	lock;
 };
 
 /**
@@ -88,7 +92,9 @@ struct pci_epc_mem {
  * @mem: address space of the endpoint controller
  * @max_functions: max number of functions that can be configured in this EPC
  * @group: configfs group representing the PCI EPC device
- * @lock: spinlock to protect pci_epc ops
+ * @lock: mutex to protect pci_epc ops
+ * @function_num_map: bitmap to manage physical function number
+ * @notifier: used to notify EPF of any EPC events (like linkup)
  */
 struct pci_epc {
 	struct device			dev;
@@ -97,8 +103,10 @@ struct pci_epc {
 	struct pci_epc_mem		*mem;
 	u8				max_functions;
 	struct config_group		*group;
-	/* spinlock to protect against concurrent access of EP controller */
-	spinlock_t			lock;
+	/* mutex to protect against concurrent access of EP controller */
+	struct mutex			lock;
+	unsigned long			function_num_map;
+	struct atomic_notifier_head	notifier;
 };
 
 /**
@@ -113,6 +121,7 @@ struct pci_epc {
  */
 struct pci_epc_features {
 	unsigned int	linkup_notifier : 1;
+	unsigned int	core_init_notifier : 1;
 	unsigned int	msi_capable : 1;
 	unsigned int	msix_capable : 1;
 	u8	reserved_bar;
@@ -141,6 +150,12 @@ static inline void *epc_get_drvdata(struct pci_epc *epc)
 	return dev_get_drvdata(&epc->dev);
 }
 
+static inline int
+pci_epc_register_notifier(struct pci_epc *epc, struct notifier_block *nb)
+{
+	return atomic_notifier_chain_register(&epc->notifier, nb);
+}
+
 struct pci_epc *
 __devm_pci_epc_create(struct device *dev, const struct pci_epc_ops *ops,
 		      struct module *owner);
@@ -151,6 +166,7 @@ void devm_pci_epc_destroy(struct device *dev, struct pci_epc *epc);
 void pci_epc_destroy(struct pci_epc *epc);
 int pci_epc_add_epf(struct pci_epc *epc, struct pci_epf *epf);
 void pci_epc_linkup(struct pci_epc *epc);
+void pci_epc_init_notify(struct pci_epc *epc);
 void pci_epc_remove_epf(struct pci_epc *epc, struct pci_epf *epf);
 int pci_epc_write_header(struct pci_epc *epc, u8 func_no,
 			 struct pci_epf_header *hdr);
@@ -165,7 +181,8 @@ void pci_epc_unmap_addr(struct pci_epc *epc, u8 func_no,
 			phys_addr_t phys_addr);
 int pci_epc_set_msi(struct pci_epc *epc, u8 func_no, u8 interrupts);
 int pci_epc_get_msi(struct pci_epc *epc, u8 func_no);
-int pci_epc_set_msix(struct pci_epc *epc, u8 func_no, u16 interrupts);
+int pci_epc_set_msix(struct pci_epc *epc, u8 func_no, u16 interrupts,
+		     enum pci_barno, u32 offset);
 int pci_epc_get_msix(struct pci_epc *epc, u8 func_no);
 int pci_epc_raise_irq(struct pci_epc *epc, u8 func_no,
 		      enum pci_epc_irq_type type, u16 interrupt_num);
diff --git a/include/linux/pci-epf.h b/include/linux/pci-epf.h
index 2d6f075..6644ff3 100644
--- a/include/linux/pci-epf.h
+++ b/include/linux/pci-epf.h
@@ -15,6 +15,11 @@
 
 struct pci_epf;
 
+enum pci_notify_event {
+	CORE_INIT,
+	LINK_UP,
+};
+
 enum pci_barno {
 	BAR_0,
 	BAR_1,
@@ -55,13 +60,10 @@ struct pci_epf_header {
  * @bind: ops to perform when a EPC device has been bound to EPF device
  * @unbind: ops to perform when a binding has been lost between a EPC device
  *	    and EPF device
- * @linkup: ops to perform when the EPC device has established a connection with
- *	    a host system
  */
 struct pci_epf_ops {
 	int	(*bind)(struct pci_epf *epf);
 	void	(*unbind)(struct pci_epf *epf);
-	void	(*linkup)(struct pci_epf *epf);
 };
 
 /**
@@ -92,10 +94,12 @@ struct pci_epf_driver {
 /**
  * struct pci_epf_bar - represents the BAR of EPF device
  * @phys_addr: physical address that should be mapped to the BAR
+ * @addr: virtual address corresponding to the @phys_addr
  * @size: the size of the address space present in BAR
  */
 struct pci_epf_bar {
 	dma_addr_t	phys_addr;
+	void		*addr;
 	size_t		size;
 	enum pci_barno	barno;
 	int		flags;
@@ -112,6 +116,8 @@ struct pci_epf_bar {
  * @epc: the EPC device to which this EPF device is bound
  * @driver: the EPF driver to which this EPF device is bound
  * @list: to add pci_epf as a list of PCI endpoint functions to pci_epc
+ * @nb: notifier block to notify EPF of any EPC events (like linkup)
+ * @lock: mutex to protect pci_epf_ops
  */
 struct pci_epf {
 	struct device		dev;
@@ -125,6 +131,22 @@ struct pci_epf {
 	struct pci_epc		*epc;
 	struct pci_epf_driver	*driver;
 	struct list_head	list;
+	struct notifier_block   nb;
+	/* mutex to protect against concurrent access of pci_epf_ops */
+	struct mutex		lock;
+};
+
+/**
+ * struct pci_epf_msix_tbl - represents the MSIX table entry structure
+ * @msg_addr: Writes to this address will trigger MSIX interrupt in host
+ * @msg_data: Data that should be written to @msg_addr to trigger MSIX interrupt
+ * @vector_ctrl: Identifies if the function is prohibited from sending a message
+ * using this MSIX table entry
+ */
+struct pci_epf_msix_tbl {
+	u64 msg_addr;
+	u32 msg_data;
+	u32 vector_ctrl;
 };
 
 #define to_pci_epf(epf_dev) container_of((epf_dev), struct pci_epf, dev)
@@ -154,5 +176,4 @@ void *pci_epf_alloc_space(struct pci_epf *epf, size_t size, enum pci_barno bar,
 void pci_epf_free_space(struct pci_epf *epf, void *addr, enum pci_barno bar);
 int pci_epf_bind(struct pci_epf *epf);
 void pci_epf_unbind(struct pci_epf *epf);
-void pci_epf_linkup(struct pci_epf *epf);
 #endif /* __LINUX_PCI_EPF_H */
diff --git a/include/linux/pci.h b/include/linux/pci.h
index a048fba..83ce1cd 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -243,7 +243,7 @@ enum pcie_link_width {
 	PCIE_LNK_WIDTH_UNKNOWN	= 0xff,
 };
 
-/* Based on the PCI Hotplug Spec, but some values are made up by us */
+/* See matching string table in pci_speed_string() */
 enum pci_bus_speed {
 	PCI_SPEED_33MHz			= 0x00,
 	PCI_SPEED_66MHz			= 0x01,
@@ -451,6 +451,11 @@ struct pci_dev {
 	const struct attribute_group **msi_irq_groups;
 #endif
 	struct pci_vpd *vpd;
+#ifdef CONFIG_PCIE_DPC
+	u16		dpc_cap;
+	unsigned int	dpc_rp_extensions:1;
+	u8		dpc_rp_log_size;
+#endif
 #ifdef CONFIG_PCI_ATS
 	union {
 		struct pci_sriov	*sriov;		/* PF: SR-IOV info */
@@ -517,7 +522,9 @@ struct pci_host_bridge {
 	unsigned int	native_shpc_hotplug:1;	/* OS may use SHPC hotplug */
 	unsigned int	native_pme:1;		/* OS may use PCIe PME */
 	unsigned int	native_ltr:1;		/* OS may use PCIe LTR */
+	unsigned int	native_dpc:1;		/* OS may use PCIe DPC */
 	unsigned int	preserve_config:1;	/* Preserve FW resource setup */
+	unsigned int	size_windows:1;		/* Enable root bus sizing */
 
 	/* Resource alignment requirements */
 	resource_size_t (*align_resource)(struct pci_dev *dev,
@@ -1224,7 +1231,6 @@ int pci_enable_rom(struct pci_dev *pdev);
 void pci_disable_rom(struct pci_dev *pdev);
 void __iomem __must_check *pci_map_rom(struct pci_dev *pdev, size_t *size);
 void pci_unmap_rom(struct pci_dev *pdev, void __iomem *rom);
-void __iomem __must_check *pci_platform_rom(struct pci_dev *pdev, size_t *size);
 
 /* Power management related routines */
 int pci_save_state(struct pci_dev *dev);
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 977e668..1dfc4e1 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2585,6 +2585,8 @@
 
 #define PCI_VENDOR_ID_AMAZON		0x1d0f
 
+#define PCI_VENDOR_ID_ZHAOXIN		0x1d17
+
 #define PCI_VENDOR_ID_HYGON		0x1d94
 
 #define PCI_VENDOR_ID_HXT		0x1dbf
diff --git a/include/linux/percpu_counter.h b/include/linux/percpu_counter.h
index 4f05249..0a4f54d 100644
--- a/include/linux/percpu_counter.h
+++ b/include/linux/percpu_counter.h
@@ -78,9 +78,9 @@ static inline s64 percpu_counter_read(struct percpu_counter *fbc)
  */
 static inline s64 percpu_counter_read_positive(struct percpu_counter *fbc)
 {
-	s64 ret = fbc->count;
+	/* Prevent reloads of fbc->count */
+	s64 ret = READ_ONCE(fbc->count);
 
-	barrier();		/* Prevent reloads of fbc->count */
 	if (ret >= 0)
 		return ret;
 	return 0;
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index 8768a39..9c3e761 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -1020,6 +1020,7 @@ struct perf_sample_data {
 	u64				stack_user_size;
 
 	u64				phys_addr;
+	u64				cgroup;
 } ____cacheline_aligned;
 
 /* default value for data source */
diff --git a/include/linux/pid.h b/include/linux/pid.h
index 01a0d4e..cc896f0f 100644
--- a/include/linux/pid.h
+++ b/include/linux/pid.h
@@ -60,6 +60,7 @@ struct pid
 {
 	refcount_t count;
 	unsigned int level;
+	spinlock_t lock;
 	/* lists of tasks that use this pid */
 	struct hlist_head tasks[PIDTYPE_MAX];
 	struct hlist_head inodes;
diff --git a/include/linux/pinctrl/pinctrl.h b/include/linux/pinctrl/pinctrl.h
index 7ce2345..2aef59d 100644
--- a/include/linux/pinctrl/pinctrl.h
+++ b/include/linux/pinctrl/pinctrl.h
@@ -186,7 +186,7 @@ extern int pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
 				const char *pin_group, const unsigned **pins,
 				unsigned *num_pins);
 
-#ifdef CONFIG_OF
+#if IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_PINCTRL)
 extern struct pinctrl_dev *of_pinctrl_get(struct device_node *np);
 #else
 static inline
diff --git a/include/linux/platform_data/cros_ec_proto.h b/include/linux/platform_data/cros_ec_proto.h
index ba59147..3832433 100644
--- a/include/linux/platform_data/cros_ec_proto.h
+++ b/include/linux/platform_data/cros_ec_proto.h
@@ -125,6 +125,9 @@ struct cros_ec_command {
  * @host_event_wake_mask: Mask of host events that cause wake from suspend.
  * @last_event_time: exact time from the hard irq when we got notified of
  *     a new event.
+ * @notifier_ready: The notifier_block to let the kernel re-query EC
+ *		    communication protocol when the EC sends
+ *		    EC_HOST_EVENT_INTERFACE_READY.
  * @ec: The platform_device used by the mfd driver to interface with the
  *      main EC.
  * @pd: The platform_device used by the mfd driver to interface with the
@@ -166,6 +169,7 @@ struct cros_ec_device {
 	u32 host_event_wake_mask;
 	u32 last_resume_result;
 	ktime_t last_event_time;
+	struct notifier_block notifier_ready;
 
 	/* The platform devices used by the mfd driver */
 	struct platform_device *ec;
diff --git a/include/linux/platform_data/cros_ec_sensorhub.h b/include/linux/platform_data/cros_ec_sensorhub.h
index bef7ffc..c588be8 100644
--- a/include/linux/platform_data/cros_ec_sensorhub.h
+++ b/include/linux/platform_data/cros_ec_sensorhub.h
@@ -8,8 +8,13 @@
 #ifndef __LINUX_PLATFORM_DATA_CROS_EC_SENSORHUB_H
 #define __LINUX_PLATFORM_DATA_CROS_EC_SENSORHUB_H
 
+#include <linux/ktime.h>
+#include <linux/mutex.h>
+#include <linux/notifier.h>
 #include <linux/platform_data/cros_ec_commands.h>
 
+struct iio_dev;
+
 /**
  * struct cros_ec_sensor_platform - ChromeOS EC sensor platform information.
  * @sensor_num: Id of the sensor, as reported by the EC.
@@ -19,12 +24,170 @@ struct cros_ec_sensor_platform {
 };
 
 /**
+ * typedef cros_ec_sensorhub_push_data_cb_t - Callback function to send datum
+ *					      to specific sensors.
+ *
+ * @indio_dev: The IIO device that will process the sample.
+ * @data: Vector array of the ring sample.
+ * @timestamp: Timestamp in host timespace when the sample was acquired by
+ *             the EC.
+ */
+typedef int (*cros_ec_sensorhub_push_data_cb_t)(struct iio_dev *indio_dev,
+						s16 *data,
+						s64 timestamp);
+
+struct cros_ec_sensorhub_sensor_push_data {
+	struct iio_dev *indio_dev;
+	cros_ec_sensorhub_push_data_cb_t push_data_cb;
+};
+
+enum {
+	CROS_EC_SENSOR_LAST_TS,
+	CROS_EC_SENSOR_NEW_TS,
+	CROS_EC_SENSOR_ALL_TS
+};
+
+struct cros_ec_sensors_ring_sample {
+	u8  sensor_id;
+	u8  flag;
+	s16 vector[3];
+	s64 timestamp;
+} __packed;
+
+/* State used for cros_ec_ring_fix_overflow */
+struct cros_ec_sensors_ec_overflow_state {
+	s64 offset;
+	s64 last;
+};
+
+/* Length of the filter, how long to remember entries for */
+#define CROS_EC_SENSORHUB_TS_HISTORY_SIZE 64
+
+/**
+ * struct cros_ec_sensors_ts_filter_state - Timestamp filetr state.
+ *
+ * @x_offset: x is EC interrupt time. x_offset its last value.
+ * @y_offset: y is the difference between AP and EC time, y_offset its last
+ *            value.
+ * @x_history: The past history of x, relative to x_offset.
+ * @y_history: The past history of y, relative to y_offset.
+ * @m_history: rate between y and x.
+ * @history_len: Amount of valid historic data in the arrays.
+ * @temp_buf: Temporary buffer used when updating the filter.
+ * @median_m: median value of m_history
+ * @median_error: final error to apply to AP interrupt timestamp to get the
+ *                "true timestamp" the event occurred.
+ */
+struct cros_ec_sensors_ts_filter_state {
+	s64 x_offset, y_offset;
+	s64 x_history[CROS_EC_SENSORHUB_TS_HISTORY_SIZE];
+	s64 y_history[CROS_EC_SENSORHUB_TS_HISTORY_SIZE];
+	s64 m_history[CROS_EC_SENSORHUB_TS_HISTORY_SIZE];
+	int history_len;
+
+	s64 temp_buf[CROS_EC_SENSORHUB_TS_HISTORY_SIZE];
+
+	s64 median_m;
+	s64 median_error;
+};
+
+/* struct cros_ec_sensors_ts_batch_state - State of batch of a single sensor.
+ *
+ * Use to store information to batch data using median fileter information.
+ *
+ * @penul_ts: last but one batch timestamp (penultimate timestamp).
+ *	      Used for timestamp spreading calculations
+ *	      when a batch shows up.
+ * @penul_len: last but one batch length.
+ * @last_ts: Last batch timestam.
+ * @last_len: Last batch length.
+ * @newest_sensor_event: Last sensor timestamp.
+ */
+struct cros_ec_sensors_ts_batch_state {
+	s64 penul_ts;
+	int penul_len;
+	s64 last_ts;
+	int last_len;
+	s64 newest_sensor_event;
+};
+
+/*
  * struct cros_ec_sensorhub - Sensor Hub device data.
  *
+ * @dev: Device object, mostly used for logging.
  * @ec: Embedded Controller where the hub is located.
+ * @sensor_num: Number of MEMS sensors present in the EC.
+ * @msg: Structure to send FIFO requests.
+ * @params: Pointer to parameters in msg.
+ * @resp: Pointer to responses in msg.
+ * @cmd_lock : Lock for sending msg.
+ * @notifier: Notifier to kick the FIFO interrupt.
+ * @ring: Preprocessed ring to store events.
+ * @fifo_timestamp: Array for event timestamp and spreading.
+ * @fifo_info: Copy of FIFO information coming from the EC.
+ * @fifo_size: Size of the ring.
+ * @batch_state: Per sensor information of the last batches received.
+ * @overflow_a: For handling timestamp overflow for a time (sensor events)
+ * @overflow_b: For handling timestamp overflow for b time (ec interrupts)
+ * @filter: Medium fileter structure.
+ * @tight_timestamps: Set to truen when EC support tight timestamping:
+ *		      The timestamps reported from the EC have low jitter.
+ *		      Timestamps also come before every sample. Set either
+ *		      by feature bits coming from the EC or userspace.
+ * @future_timestamp_count: Statistics used to compute shaved time.
+ *			    This occurs when timestamp interpolation from EC
+ *			    time to AP time accidentally puts timestamps in
+ *			    the future. These timestamps are clamped to
+ *			    `now` and these count/total_ns maintain the
+ *			    statistics for how much time was removed in a
+ *			    given period.
+ * @future_timestamp_total_ns: Total amount of time shaved.
+ * @push_data: Array of callback to send datums to iio sensor object.
  */
 struct cros_ec_sensorhub {
+	struct device *dev;
 	struct cros_ec_dev *ec;
+	int sensor_num;
+
+	struct cros_ec_command *msg;
+	struct ec_params_motion_sense *params;
+	struct ec_response_motion_sense *resp;
+	struct mutex cmd_lock;  /* Lock for protecting msg structure. */
+
+	struct notifier_block notifier;
+
+	struct cros_ec_sensors_ring_sample *ring;
+
+	ktime_t fifo_timestamp[CROS_EC_SENSOR_ALL_TS];
+	struct ec_response_motion_sense_fifo_info *fifo_info;
+	int fifo_size;
+
+	struct cros_ec_sensors_ts_batch_state *batch_state;
+
+	struct cros_ec_sensors_ec_overflow_state overflow_a;
+	struct cros_ec_sensors_ec_overflow_state overflow_b;
+
+	struct cros_ec_sensors_ts_filter_state filter;
+
+	int tight_timestamps;
+
+	s32 future_timestamp_count;
+	s64 future_timestamp_total_ns;
+
+	struct cros_ec_sensorhub_sensor_push_data *push_data;
 };
 
+int cros_ec_sensorhub_register_push_data(struct cros_ec_sensorhub *sensorhub,
+					 u8 sensor_num,
+					 struct iio_dev *indio_dev,
+					 cros_ec_sensorhub_push_data_cb_t cb);
+
+void cros_ec_sensorhub_unregister_push_data(struct cros_ec_sensorhub *sensorhub,
+					    u8 sensor_num);
+
+int cros_ec_sensorhub_ring_add(struct cros_ec_sensorhub *sensorhub);
+void cros_ec_sensorhub_ring_remove(void *arg);
+int cros_ec_sensorhub_ring_fifo_enable(struct cros_ec_sensorhub *sensorhub,
+				       bool on);
+
 #endif   /* __LINUX_PLATFORM_DATA_CROS_EC_SENSORHUB_H */
diff --git a/include/linux/platform_data/cros_usbpd_notify.h b/include/linux/platform_data/cros_usbpd_notify.h
new file mode 100644
index 0000000..4f27917
--- /dev/null
+++ b/include/linux/platform_data/cros_usbpd_notify.h
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ChromeOS EC Power Delivery Notifier Driver
+ *
+ * Copyright 2020 Google LLC
+ */
+
+#ifndef __LINUX_PLATFORM_DATA_CROS_USBPD_NOTIFY_H
+#define __LINUX_PLATFORM_DATA_CROS_USBPD_NOTIFY_H
+
+#include <linux/notifier.h>
+
+int cros_usbpd_register_notify(struct notifier_block *nb);
+
+void cros_usbpd_unregister_notify(struct notifier_block *nb);
+
+#endif  /* __LINUX_PLATFORM_DATA_CROS_USBPD_NOTIFY_H */
diff --git a/include/linux/platform_data/leds-kirkwood-ns2.h b/include/linux/platform_data/leds-kirkwood-ns2.h
deleted file mode 100644
index eb8a686..0000000
--- a/include/linux/platform_data/leds-kirkwood-ns2.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * Platform data structure for Network Space v2 LED driver
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __LEDS_KIRKWOOD_NS2_H
-#define __LEDS_KIRKWOOD_NS2_H
-
-enum ns2_led_modes {
-	NS_V2_LED_OFF,
-	NS_V2_LED_ON,
-	NS_V2_LED_SATA,
-};
-
-struct ns2_led_modval {
-	enum ns2_led_modes	mode;
-	int			cmd_level;
-	int			slow_level;
-};
-
-struct ns2_led {
-	const char	*name;
-	const char	*default_trigger;
-	unsigned	cmd;
-	unsigned	slow;
-	int		num_modes;
-	struct ns2_led_modval *modval;
-};
-
-struct ns2_led_platform_data {
-	int		num_leds;
-	struct ns2_led	*leds;
-};
-
-#endif /* __LEDS_KIRKWOOD_NS2_H */
diff --git a/include/linux/platform_data/pm33xx.h b/include/linux/platform_data/pm33xx.h
index dd59719..644af1d 100644
--- a/include/linux/platform_data/pm33xx.h
+++ b/include/linux/platform_data/pm33xx.h
@@ -46,9 +46,13 @@ struct am33xx_pm_sram_addr {
 };
 
 struct am33xx_pm_platform_data {
-	int	(*init)(void);
+	int     (*init)(int (*idle)(u32 wfi_flags));
+	int     (*deinit)(void);
 	int	(*soc_suspend)(unsigned int state, int (*fn)(unsigned long),
 			       unsigned long args);
+	int	(*cpu_suspend)(int (*fn)(unsigned long), unsigned long args);
+	void    (*begin_suspend)(void);
+	void    (*finish_suspend)(void);
 	struct  am33xx_pm_sram_addr *(*get_sram_addrs)(void);
 	void __iomem *(*get_rtc_base_addr)(void);
 	void (*save_context)(void);
diff --git a/include/linux/platform_data/pwm_omap_dmtimer.h b/include/linux/platform_data/pwm_omap_dmtimer.h
deleted file mode 100644
index e7d521e..0000000
--- a/include/linux/platform_data/pwm_omap_dmtimer.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * include/linux/platform_data/pwm_omap_dmtimer.h
- *
- * OMAP Dual-Mode Timer PWM platform data
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
- * Tarun Kanti DebBarma <tarun.kanti@ti.com>
- * Thara Gopinath <thara@ti.com>
- *
- * Platform device conversion and hwmod support.
- *
- * Copyright (C) 2005 Nokia Corporation
- * Author: Lauri Leukkunen <lauri.leukkunen@nokia.com>
- * PWM and clock framework support by Timo Teras.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __PWM_OMAP_DMTIMER_PDATA_H
-#define __PWM_OMAP_DMTIMER_PDATA_H
-
-/* clock sources */
-#define PWM_OMAP_DMTIMER_SRC_SYS_CLK			0x00
-#define PWM_OMAP_DMTIMER_SRC_32_KHZ			0x01
-#define PWM_OMAP_DMTIMER_SRC_EXT_CLK			0x02
-
-/* timer interrupt enable bits */
-#define PWM_OMAP_DMTIMER_INT_CAPTURE			(1 << 2)
-#define PWM_OMAP_DMTIMER_INT_OVERFLOW			(1 << 1)
-#define PWM_OMAP_DMTIMER_INT_MATCH			(1 << 0)
-
-/* trigger types */
-#define PWM_OMAP_DMTIMER_TRIGGER_NONE			0x00
-#define PWM_OMAP_DMTIMER_TRIGGER_OVERFLOW		0x01
-#define PWM_OMAP_DMTIMER_TRIGGER_OVERFLOW_AND_COMPARE	0x02
-
-struct omap_dm_timer;
-typedef struct omap_dm_timer pwm_omap_dmtimer;
-
-struct pwm_omap_dmtimer_pdata {
-	pwm_omap_dmtimer *(*request_by_node)(struct device_node *np);
-	pwm_omap_dmtimer *(*request_specific)(int timer_id);
-	pwm_omap_dmtimer *(*request)(void);
-
-	int	(*free)(pwm_omap_dmtimer *timer);
-
-	void	(*enable)(pwm_omap_dmtimer *timer);
-	void	(*disable)(pwm_omap_dmtimer *timer);
-
-	int	(*get_irq)(pwm_omap_dmtimer *timer);
-	int	(*set_int_enable)(pwm_omap_dmtimer *timer, unsigned int value);
-	int	(*set_int_disable)(pwm_omap_dmtimer *timer, u32 mask);
-
-	struct clk *(*get_fclk)(pwm_omap_dmtimer *timer);
-
-	int	(*start)(pwm_omap_dmtimer *timer);
-	int	(*stop)(pwm_omap_dmtimer *timer);
-	int	(*set_source)(pwm_omap_dmtimer *timer, int source);
-
-	int	(*set_load)(pwm_omap_dmtimer *timer, int autoreload,
-			unsigned int value);
-	int	(*set_match)(pwm_omap_dmtimer *timer, int enable,
-			unsigned int match);
-	int	(*set_pwm)(pwm_omap_dmtimer *timer, int def_on,
-			int toggle, int trigger);
-	int	(*set_prescaler)(pwm_omap_dmtimer *timer, int prescaler);
-
-	unsigned int (*read_counter)(pwm_omap_dmtimer *timer);
-	int	(*write_counter)(pwm_omap_dmtimer *timer, unsigned int value);
-	unsigned int (*read_status)(pwm_omap_dmtimer *timer);
-	int	(*write_status)(pwm_omap_dmtimer *timer, unsigned int value);
-};
-
-#endif /* __PWM_OMAP_DMTIMER_PDATA_H */
diff --git a/include/linux/platform_data/remoteproc-omap.h b/include/linux/platform_data/remoteproc-omap.h
deleted file mode 100644
index 7e3a160..0000000
--- a/include/linux/platform_data/remoteproc-omap.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Remote Processor - omap-specific bits
- *
- * Copyright (C) 2011 Texas Instruments, Inc.
- * Copyright (C) 2011 Google, Inc.
- */
-
-#ifndef _PLAT_REMOTEPROC_H
-#define _PLAT_REMOTEPROC_H
-
-struct rproc_ops;
-struct platform_device;
-
-/*
- * struct omap_rproc_pdata - omap remoteproc's platform data
- * @name: the remoteproc's name
- * @oh_name: omap hwmod device
- * @oh_name_opt: optional, secondary omap hwmod device
- * @firmware: name of firmware file to load
- * @mbox_name: name of omap mailbox device to use with this rproc
- * @ops: start/stop rproc handlers
- * @device_enable: omap-specific handler for enabling a device
- * @device_shutdown: omap-specific handler for shutting down a device
- * @set_bootaddr: omap-specific handler for setting the rproc boot address
- */
-struct omap_rproc_pdata {
-	const char *name;
-	const char *oh_name;
-	const char *oh_name_opt;
-	const char *firmware;
-	const char *mbox_name;
-	const struct rproc_ops *ops;
-	int (*device_enable)(struct platform_device *pdev);
-	int (*device_shutdown)(struct platform_device *pdev);
-	void (*set_bootaddr)(u32);
-};
-
-#if defined(CONFIG_OMAP_REMOTEPROC) || defined(CONFIG_OMAP_REMOTEPROC_MODULE)
-
-void __init omap_rproc_reserve_cma(void);
-
-#else
-
-static inline void __init omap_rproc_reserve_cma(void)
-{
-}
-
-#endif
-
-#endif /* _PLAT_REMOTEPROC_H */
diff --git a/include/linux/platform_data/ti-sysc.h b/include/linux/platform_data/ti-sysc.h
index 2cbde65..c59999c 100644
--- a/include/linux/platform_data/ti-sysc.h
+++ b/include/linux/platform_data/ti-sysc.h
@@ -17,6 +17,7 @@ enum ti_sysc_module_type {
 	TI_SYSC_OMAP4_MCASP,
 	TI_SYSC_OMAP4_USB_HOST_FS,
 	TI_SYSC_DRA7_MCAN,
+	TI_SYSC_PRUSS,
 };
 
 struct ti_sysc_cookie {
@@ -49,6 +50,9 @@ struct sysc_regbits {
 	s8 emufree_shift;
 };
 
+#define SYSC_MODULE_QUIRK_PRUSS		BIT(24)
+#define SYSC_MODULE_QUIRK_DSS_RESET	BIT(23)
+#define SYSC_MODULE_QUIRK_RTC_UNLOCK	BIT(22)
 #define SYSC_QUIRK_CLKDM_NOAUTO		BIT(21)
 #define SYSC_QUIRK_FORCE_MSTANDBY	BIT(20)
 #define SYSC_MODULE_QUIRK_AESS		BIT(19)
@@ -141,6 +145,7 @@ struct clk;
 
 struct ti_sysc_platform_data {
 	struct of_dev_auxdata *auxdata;
+	bool (*soc_type_gp)(void);
 	int (*init_clockdomain)(struct device *dev, struct clk *fck,
 				struct clk *ick, struct ti_sysc_cookie *cookie);
 	void (*clkdm_deny_idle)(struct device *dev,
diff --git a/include/linux/platform_data/wilco-ec.h b/include/linux/platform_data/wilco-ec.h
index afede15..3e268e6 100644
--- a/include/linux/platform_data/wilco-ec.h
+++ b/include/linux/platform_data/wilco-ec.h
@@ -8,8 +8,8 @@
 #ifndef WILCO_EC_H
 #define WILCO_EC_H
 
-#include <linux/device.h>
-#include <linux/kernel.h>
+#include <linux/mutex.h>
+#include <linux/types.h>
 
 /* Message flags for using the mailbox() interface */
 #define WILCO_EC_FLAG_NO_RESPONSE	BIT(0) /* EC does not respond */
@@ -17,6 +17,10 @@
 /* Normal commands have a maximum 32 bytes of data */
 #define EC_MAILBOX_DATA_SIZE		32
 
+struct device;
+struct resource;
+struct platform_device;
+
 /**
  * struct wilco_ec_device - Wilco Embedded Controller handle.
  * @dev: Device handle.
@@ -79,7 +83,7 @@ struct wilco_ec_response {
 	u16 result;
 	u16 data_size;
 	u8 reserved[2];
-	u8 data[0];
+	u8 data[];
 } __packed;
 
 /**
diff --git a/include/linux/posix_acl.h b/include/linux/posix_acl.h
index 540595a..90797f1 100644
--- a/include/linux/posix_acl.h
+++ b/include/linux/posix_acl.h
@@ -28,7 +28,7 @@ struct posix_acl {
 	refcount_t		a_refcount;
 	struct rcu_head		a_rcu;
 	unsigned int		a_count;
-	struct posix_acl_entry	a_entries[0];
+	struct posix_acl_entry	a_entries[];
 };
 
 #define FOREACH_ACL_ENTRY(pa, acl, pe) \
diff --git a/include/linux/power/bq2415x_charger.h b/include/linux/power/bq2415x_charger.h
index 7a91b35..4ca0832 100644
--- a/include/linux/power/bq2415x_charger.h
+++ b/include/linux/power/bq2415x_charger.h
@@ -2,7 +2,7 @@
 /*
  * bq2415x charger driver
  *
- * Copyright (C) 2011-2013  Pali Rohár <pali.rohar@gmail.com>
+ * Copyright (C) 2011-2013  Pali Rohár <pali@kernel.org>
  */
 
 #ifndef BQ2415X_CHARGER_H
diff --git a/include/linux/power/charger-manager.h b/include/linux/power/charger-manager.h
index ad19e68..ae94dce 100644
--- a/include/linux/power/charger-manager.h
+++ b/include/linux/power/charger-manager.h
@@ -248,7 +248,7 @@ struct charger_manager {
 	u64 charging_end_time;
 };
 
-#ifdef CONFIG_CHARGER_MANAGER
+#if IS_ENABLED(CONFIG_CHARGER_MANAGER)
 extern void cm_notify_event(struct power_supply *psy,
 				enum cm_event_types type, char *msg);
 #else
diff --git a/include/linux/printk.h b/include/linux/printk.h
index 1e6108b..e061635 100644
--- a/include/linux/printk.h
+++ b/include/linux/printk.h
@@ -202,7 +202,6 @@ __printf(1, 2) void dump_stack_set_arch_desc(const char *fmt, ...);
 void dump_stack_print_info(const char *log_lvl);
 void show_regs_print_info(const char *log_lvl);
 extern asmlinkage void dump_stack(void) __cold;
-extern void printk_safe_init(void);
 extern void printk_safe_flush(void);
 extern void printk_safe_flush_on_panic(void);
 #else
@@ -269,10 +268,6 @@ static inline void dump_stack(void)
 {
 }
 
-static inline void printk_safe_init(void)
-{
-}
-
 static inline void printk_safe_flush(void)
 {
 }
diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h
index 40a7982..45c05fd 100644
--- a/include/linux/proc_fs.h
+++ b/include/linux/proc_fs.h
@@ -5,6 +5,7 @@
 #ifndef _LINUX_PROC_FS_H
 #define _LINUX_PROC_FS_H
 
+#include <linux/compiler.h>
 #include <linux/types.h>
 #include <linux/fs.h>
 
@@ -12,7 +13,21 @@ struct proc_dir_entry;
 struct seq_file;
 struct seq_operations;
 
+enum {
+	/*
+	 * All /proc entries using this ->proc_ops instance are never removed.
+	 *
+	 * If in doubt, ignore this flag.
+	 */
+#ifdef MODULE
+	PROC_ENTRY_PERMANENT = 0U,
+#else
+	PROC_ENTRY_PERMANENT = 1U << 0,
+#endif
+};
+
 struct proc_ops {
+	unsigned int proc_flags;
 	int	(*proc_open)(struct inode *, struct file *);
 	ssize_t	(*proc_read)(struct file *, char __user *, size_t, loff_t *);
 	ssize_t	(*proc_write)(struct file *, const char __user *, size_t, loff_t *);
@@ -25,7 +40,7 @@ struct proc_ops {
 #endif
 	int	(*proc_mmap)(struct file *, struct vm_area_struct *);
 	unsigned long (*proc_get_unmapped_area)(struct file *, unsigned long, unsigned long, unsigned long, unsigned long);
-};
+} __randomize_layout;
 
 #ifdef CONFIG_PROC_FS
 
diff --git a/include/linux/pwm.h b/include/linux/pwm.h
index 0ef808d..2635b2a 100644
--- a/include/linux/pwm.h
+++ b/include/linux/pwm.h
@@ -71,7 +71,8 @@ struct pwm_state {
  * @chip: PWM chip providing this PWM device
  * @chip_data: chip-private data associated with the PWM device
  * @args: PWM arguments
- * @state: curent PWM channel state
+ * @state: last applied state
+ * @last: last implemented state (for PWM_DEBUG)
  */
 struct pwm_device {
 	const char *label;
@@ -83,6 +84,7 @@ struct pwm_device {
 
 	struct pwm_args args;
 	struct pwm_state state;
+	struct pwm_state last;
 };
 
 /**
diff --git a/include/linux/pwm_backlight.h b/include/linux/pwm_backlight.h
index 8ea265a..06086cb 100644
--- a/include/linux/pwm_backlight.h
+++ b/include/linux/pwm_backlight.h
@@ -16,8 +16,6 @@ struct platform_pwm_backlight_data {
 	unsigned int *levels;
 	unsigned int post_pwm_on_delay;
 	unsigned int pwm_off_delay;
-	/* TODO remove once all users are switched to gpiod_* API */
-	int enable_gpio;
 	int (*init)(struct device *dev);
 	int (*notify)(struct device *dev, int brightness);
 	void (*notify_after)(struct device *dev, int brightness);
diff --git a/include/linux/random.h b/include/linux/random.h
index d319f9a..45e1f8f 100644
--- a/include/linux/random.h
+++ b/include/linux/random.h
@@ -7,6 +7,8 @@
 #ifndef _LINUX_RANDOM_H
 #define _LINUX_RANDOM_H
 
+#include <linux/bug.h>
+#include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/once.h>
 
@@ -185,6 +187,26 @@ static inline bool __must_check arch_get_random_seed_int(unsigned int *v)
 }
 #endif
 
+/*
+ * Called from the boot CPU during startup; not valid to call once
+ * secondary CPUs are up and preemption is possible.
+ */
+#ifndef arch_get_random_seed_long_early
+static inline bool __init arch_get_random_seed_long_early(unsigned long *v)
+{
+	WARN_ON(system_state != SYSTEM_BOOTING);
+	return arch_get_random_seed_long(v);
+}
+#endif
+
+#ifndef arch_get_random_long_early
+static inline bool __init arch_get_random_long_early(unsigned long *v)
+{
+	WARN_ON(system_state != SYSTEM_BOOTING);
+	return arch_get_random_long(v);
+}
+#endif
+
 /* Pseudo random number generator from numerical recipes. */
 static inline u32 next_pseudo_random32(u32 seed)
 {
diff --git a/include/linux/refcount.h b/include/linux/refcount.h
index 0ac50cf6..0e3ee25 100644
--- a/include/linux/refcount.h
+++ b/include/linux/refcount.h
@@ -38,11 +38,24 @@
  * atomic operations, then the count will continue to edge closer to 0. If it
  * reaches a value of 1 before /any/ of the threads reset it to the saturated
  * value, then a concurrent refcount_dec_and_test() may erroneously free the
- * underlying object. Given the precise timing details involved with the
- * round-robin scheduling of each thread manipulating the refcount and the need
- * to hit the race multiple times in succession, there doesn't appear to be a
- * practical avenue of attack even if using refcount_add() operations with
- * larger increments.
+ * underlying object.
+ * Linux limits the maximum number of tasks to PID_MAX_LIMIT, which is currently
+ * 0x400000 (and can't easily be raised in the future beyond FUTEX_TID_MASK).
+ * With the current PID limit, if no batched refcounting operations are used and
+ * the attacker can't repeatedly trigger kernel oopses in the middle of refcount
+ * operations, this makes it impossible for a saturated refcount to leave the
+ * saturation range, even if it is possible for multiple uses of the same
+ * refcount to nest in the context of a single task:
+ *
+ *     (UINT_MAX+1-REFCOUNT_SATURATED) / PID_MAX_LIMIT =
+ *     0x40000000 / 0x400000 = 0x100 = 256
+ *
+ * If hundreds of references are added/removed with a single refcounting
+ * operation, it may potentially be possible to leave the saturation range; but
+ * given the precise timing details involved with the round-robin scheduling of
+ * each thread manipulating the refcount and the need to hit the race multiple
+ * times in succession, there doesn't appear to be a practical avenue of attack
+ * even if using refcount_add() operations with larger increments.
  *
  * Memory ordering
  * ===============
diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
index 16ad666..9c07d79 100644
--- a/include/linux/remoteproc.h
+++ b/include/linux/remoteproc.h
@@ -329,7 +329,7 @@ struct rproc;
 struct rproc_mem_entry {
 	void *va;
 	dma_addr_t dma;
-	int len;
+	size_t len;
 	u32 da;
 	void *priv;
 	char name[32];
@@ -369,12 +369,14 @@ enum rsc_handling_status {
  *			expects to find it
  * @sanity_check:	sanity check the fw image
  * @get_boot_addr:	get boot address to entry point specified in firmware
+ * @panic:	optional callback to react to system panic, core will delay
+ *		panic at least the returned number of milliseconds
  */
 struct rproc_ops {
 	int (*start)(struct rproc *rproc);
 	int (*stop)(struct rproc *rproc);
 	void (*kick)(struct rproc *rproc, int vqid);
-	void * (*da_to_va)(struct rproc *rproc, u64 da, int len);
+	void * (*da_to_va)(struct rproc *rproc, u64 da, size_t len);
 	int (*parse_fw)(struct rproc *rproc, const struct firmware *fw);
 	int (*handle_rsc)(struct rproc *rproc, u32 rsc_type, void *rsc,
 			  int offset, int avail);
@@ -382,7 +384,8 @@ struct rproc_ops {
 				struct rproc *rproc, const struct firmware *fw);
 	int (*load)(struct rproc *rproc, const struct firmware *fw);
 	int (*sanity_check)(struct rproc *rproc, const struct firmware *fw);
-	u32 (*get_boot_addr)(struct rproc *rproc, const struct firmware *fw);
+	u64 (*get_boot_addr)(struct rproc *rproc, const struct firmware *fw);
+	unsigned long (*panic)(struct rproc *rproc);
 };
 
 /**
@@ -498,7 +501,7 @@ struct rproc {
 	int num_traces;
 	struct list_head carveouts;
 	struct list_head mappings;
-	u32 bootaddr;
+	u64 bootaddr;
 	struct list_head rvdevs;
 	struct list_head subdevs;
 	struct idr notifyids;
@@ -514,6 +517,7 @@ struct rproc {
 	bool auto_boot;
 	struct list_head dump_segments;
 	int nb_vdev;
+	u8 elf_class;
 };
 
 /**
@@ -599,13 +603,13 @@ void rproc_add_carveout(struct rproc *rproc, struct rproc_mem_entry *mem);
 
 struct rproc_mem_entry *
 rproc_mem_entry_init(struct device *dev,
-		     void *va, dma_addr_t dma, int len, u32 da,
+		     void *va, dma_addr_t dma, size_t len, u32 da,
 		     int (*alloc)(struct rproc *, struct rproc_mem_entry *),
 		     int (*release)(struct rproc *, struct rproc_mem_entry *),
 		     const char *name, ...);
 
 struct rproc_mem_entry *
-rproc_of_resm_mem_entry_init(struct device *dev, u32 of_resm_idx, int len,
+rproc_of_resm_mem_entry_init(struct device *dev, u32 of_resm_idx, size_t len,
 			     u32 da, const char *name, ...);
 
 int rproc_boot(struct rproc *rproc);
diff --git a/include/linux/ring_buffer.h b/include/linux/ring_buffer.h
index df0124e..c76b2f3 100644
--- a/include/linux/ring_buffer.h
+++ b/include/linux/ring_buffer.h
@@ -135,10 +135,10 @@ void ring_buffer_read_finish(struct ring_buffer_iter *iter);
 
 struct ring_buffer_event *
 ring_buffer_iter_peek(struct ring_buffer_iter *iter, u64 *ts);
-struct ring_buffer_event *
-ring_buffer_read(struct ring_buffer_iter *iter, u64 *ts);
+void ring_buffer_iter_advance(struct ring_buffer_iter *iter);
 void ring_buffer_iter_reset(struct ring_buffer_iter *iter);
 int ring_buffer_iter_empty(struct ring_buffer_iter *iter);
+bool ring_buffer_iter_dropped(struct ring_buffer_iter *iter);
 
 unsigned long ring_buffer_size(struct trace_buffer *buffer, int cpu);
 
diff --git a/include/linux/rio.h b/include/linux/rio.h
index 317bace..2cd6372 100644
--- a/include/linux/rio.h
+++ b/include/linux/rio.h
@@ -100,7 +100,7 @@ struct rio_switch {
 	u32 port_ok;
 	struct rio_switch_ops *ops;
 	spinlock_t lock;
-	struct rio_dev *nextdev[0];
+	struct rio_dev *nextdev[];
 };
 
 /**
@@ -201,7 +201,7 @@ struct rio_dev {
 	u8 hopcount;
 	struct rio_dev *prev;
 	atomic_t state;
-	struct rio_switch rswitch[0];	/* RIO switch info */
+	struct rio_switch rswitch[];	/* RIO switch info */
 };
 
 #define rio_dev_g(n) list_entry(n, struct rio_dev, global_list)
diff --git a/include/linux/rslib.h b/include/linux/rslib.h
index 5974ced..238bb85 100644
--- a/include/linux/rslib.h
+++ b/include/linux/rslib.h
@@ -54,7 +54,7 @@ struct rs_codec {
  */
 struct rs_control {
 	struct rs_codec	*codec;
-	uint16_t	buffers[0];
+	uint16_t	buffers[];
 };
 
 /* General purpose RS codec, 8-bit data width, symbol width 1-15 bit  */
diff --git a/include/linux/rtc.h b/include/linux/rtc.h
index 23990bd..bba3db3 100644
--- a/include/linux/rtc.h
+++ b/include/linux/rtc.h
@@ -34,18 +34,6 @@ static inline time64_t rtc_tm_sub(struct rtc_time *lhs, struct rtc_time *rhs)
 	return rtc_tm_to_time64(lhs) - rtc_tm_to_time64(rhs);
 }
 
-static inline void rtc_time_to_tm(unsigned long time, struct rtc_time *tm)
-{
-	rtc_time64_to_tm(time, tm);
-}
-
-static inline int rtc_tm_to_time(struct rtc_time *tm, unsigned long *time)
-{
-	*time = rtc_tm_to_time64(tm);
-
-	return 0;
-}
-
 #include <linux/device.h>
 #include <linux/seq_file.h>
 #include <linux/cdev.h>
diff --git a/include/linux/sched/task.h b/include/linux/sched/task.h
index f187988..3835907 100644
--- a/include/linux/sched/task.h
+++ b/include/linux/sched/task.h
@@ -13,6 +13,7 @@
 struct task_struct;
 struct rusage;
 union thread_union;
+struct css_set;
 
 /* All the bits taken by the old clone syscall. */
 #define CLONE_LEGACY_FLAGS 0xffffffffULL
@@ -29,6 +30,9 @@ struct kernel_clone_args {
 	pid_t *set_tid;
 	/* Number of elements in *set_tid */
 	size_t set_tid_size;
+	int cgroup;
+	struct cgroup *cgrp;
+	struct css_set *cset;
 };
 
 /*
diff --git a/include/linux/sched/topology.h b/include/linux/sched/topology.h
index af9319e..95253ad 100644
--- a/include/linux/sched/topology.h
+++ b/include/linux/sched/topology.h
@@ -142,7 +142,7 @@ struct sched_domain {
 	 * by attaching extra space to the end of the structure,
 	 * depending on how many CPUs the kernel has booted up with)
 	 */
-	unsigned long span[0];
+	unsigned long span[];
 };
 
 static inline struct cpumask *sched_domain_span(struct sched_domain *sd)
diff --git a/include/linux/seq_file.h b/include/linux/seq_file.h
index 770c2bf..1672cf6 100644
--- a/include/linux/seq_file.h
+++ b/include/linux/seq_file.h
@@ -21,7 +21,6 @@ struct seq_file {
 	size_t pad_until;
 	loff_t index;
 	loff_t read_pos;
-	u64 version;
 	struct mutex lock;
 	const struct seq_operations *op;
 	int poll_event;
diff --git a/include/linux/shmem_fs.h b/include/linux/shmem_fs.h
index d56fefe..7a35a69 100644
--- a/include/linux/shmem_fs.h
+++ b/include/linux/shmem_fs.h
@@ -78,6 +78,7 @@ extern void shmem_truncate_range(struct inode *inode, loff_t start, loff_t end);
 extern int shmem_unuse(unsigned int type, bool frontswap,
 		       unsigned long *fs_pages_to_unuse);
 
+extern bool shmem_huge_enabled(struct vm_area_struct *vma);
 extern unsigned long shmem_swap_usage(struct vm_area_struct *vma);
 extern unsigned long shmem_partial_swap_usage(struct address_space *mapping,
 						pgoff_t start, pgoff_t end);
@@ -114,15 +115,6 @@ static inline bool shmem_file(struct file *file)
 extern bool shmem_charge(struct inode *inode, long pages);
 extern void shmem_uncharge(struct inode *inode, long pages);
 
-#ifdef CONFIG_TRANSPARENT_HUGE_PAGECACHE
-extern bool shmem_huge_enabled(struct vm_area_struct *vma);
-#else
-static inline bool shmem_huge_enabled(struct vm_area_struct *vma)
-{
-	return false;
-}
-#endif
-
 #ifdef CONFIG_SHMEM
 extern int shmem_mcopy_atomic_pte(struct mm_struct *dst_mm, pmd_t *dst_pmd,
 				  struct vm_area_struct *dst_vma,
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 28b1a2b..3000c52 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -47,8 +47,8 @@
  * A. IP checksum related features
  *
  * Drivers advertise checksum offload capabilities in the features of a device.
- * From the stack's point of view these are capabilities offered by the driver,
- * a driver typically only advertises features that it is capable of offloading
+ * From the stack's point of view these are capabilities offered by the driver.
+ * A driver typically only advertises features that it is capable of offloading
  * to its device.
  *
  * The checksum related features are:
@@ -63,7 +63,7 @@
  *			  TCP or UDP packets over IPv4. These are specifically
  *			  unencapsulated packets of the form IPv4|TCP or
  *			  IPv4|UDP where the Protocol field in the IPv4 header
- *			  is TCP or UDP. The IPv4 header may contain IP options
+ *			  is TCP or UDP. The IPv4 header may contain IP options.
  *			  This feature cannot be set in features for a device
  *			  with NETIF_F_HW_CSUM also set. This feature is being
  *			  DEPRECATED (see below).
@@ -79,13 +79,13 @@
  *			  DEPRECATED (see below).
  *
  *	NETIF_F_RXCSUM - Driver (device) performs receive checksum offload.
- *			 This flag is used only used to disable the RX checksum
+ *			 This flag is only used to disable the RX checksum
  *			 feature for a device. The stack will accept receive
  *			 checksum indication in packets received on a device
  *			 regardless of whether NETIF_F_RXCSUM is set.
  *
  * B. Checksumming of received packets by device. Indication of checksum
- *    verification is in set skb->ip_summed. Possible values are:
+ *    verification is set in skb->ip_summed. Possible values are:
  *
  * CHECKSUM_NONE:
  *
@@ -115,16 +115,16 @@
  *   the packet minus one that have been verified as CHECKSUM_UNNECESSARY.
  *   For instance if a device receives an IPv6->UDP->GRE->IPv4->TCP packet
  *   and a device is able to verify the checksums for UDP (possibly zero),
- *   GRE (checksum flag is set), and TCP-- skb->csum_level would be set to
+ *   GRE (checksum flag is set) and TCP, skb->csum_level would be set to
  *   two. If the device were only able to verify the UDP checksum and not
- *   GRE, either because it doesn't support GRE checksum of because GRE
+ *   GRE, either because it doesn't support GRE checksum or because GRE
  *   checksum is bad, skb->csum_level would be set to zero (TCP checksum is
  *   not considered in this case).
  *
  * CHECKSUM_COMPLETE:
  *
  *   This is the most generic way. The device supplied checksum of the _whole_
- *   packet as seen by netif_rx() and fills out in skb->csum. Meaning, the
+ *   packet as seen by netif_rx() and fills in skb->csum. This means the
  *   hardware doesn't need to parse L3/L4 headers to implement this.
  *
  *   Notes:
@@ -153,8 +153,8 @@
  *   from skb->csum_start up to the end, and to record/write the checksum at
  *   offset skb->csum_start + skb->csum_offset. A driver may verify that the
  *   csum_start and csum_offset values are valid values given the length and
- *   offset of the packet, however they should not attempt to validate that the
- *   checksum refers to a legitimate transport layer checksum-- it is the
+ *   offset of the packet, but it should not attempt to validate that the
+ *   checksum refers to a legitimate transport layer checksum -- it is the
  *   purview of the stack to validate that csum_start and csum_offset are set
  *   correctly.
  *
@@ -178,18 +178,18 @@
  *
  * CHECKSUM_UNNECESSARY:
  *
- *   This has the same meaning on as CHECKSUM_NONE for checksum offload on
+ *   This has the same meaning as CHECKSUM_NONE for checksum offload on
  *   output.
  *
  * CHECKSUM_COMPLETE:
  *   Not used in checksum output. If a driver observes a packet with this value
- *   set in skbuff, if should treat as CHECKSUM_NONE being set.
+ *   set in skbuff, it should treat the packet as if CHECKSUM_NONE were set.
  *
  * D. Non-IP checksum (CRC) offloads
  *
  *   NETIF_F_SCTP_CRC - This feature indicates that a device is capable of
  *     offloading the SCTP CRC in a packet. To perform this offload the stack
- *     will set set csum_start and csum_offset accordingly, set ip_summed to
+ *     will set csum_start and csum_offset accordingly, set ip_summed to
  *     CHECKSUM_PARTIAL and set csum_not_inet to 1, to provide an indication in
  *     the skbuff that the CHECKSUM_PARTIAL refers to CRC32c.
  *     A driver that supports both IP checksum offload and SCTP CRC32c offload
@@ -200,10 +200,10 @@
  *   NETIF_F_FCOE_CRC - This feature indicates that a device is capable of
  *     offloading the FCOE CRC in a packet. To perform this offload the stack
  *     will set ip_summed to CHECKSUM_PARTIAL and set csum_start and csum_offset
- *     accordingly. Note the there is no indication in the skbuff that the
- *     CHECKSUM_PARTIAL refers to an FCOE checksum, a driver that supports
+ *     accordingly. Note that there is no indication in the skbuff that the
+ *     CHECKSUM_PARTIAL refers to an FCOE checksum, so a driver that supports
  *     both IP checksum offload and FCOE CRC offload must verify which offload
- *     is configured for a packet presumably by inspecting packet headers.
+ *     is configured for a packet, presumably by inspecting packet headers.
  *
  * E. Checksumming on output with GSO.
  *
@@ -211,9 +211,9 @@
  * is implied by the SKB_GSO_* flags in gso_type. Most obviously, if the
  * gso_type is SKB_GSO_TCPV4 or SKB_GSO_TCPV6, TCP checksum offload as
  * part of the GSO operation is implied. If a checksum is being offloaded
- * with GSO then ip_summed is CHECKSUM_PARTIAL, csum_start and csum_offset
- * are set to refer to the outermost checksum being offload (two offloaded
- * checksums are possible with UDP encapsulation).
+ * with GSO then ip_summed is CHECKSUM_PARTIAL, and both csum_start and
+ * csum_offset are set to refer to the outermost checksum being offloaded
+ * (two offloaded checksums are possible with UDP encapsulation).
  */
 
 /* Don't change this without changing skb_csum_unnecessary! */
@@ -4162,7 +4162,7 @@ struct skb_ext {
 	refcount_t refcnt;
 	u8 offset[SKB_EXT_NUM]; /* in chunks of 8 bytes */
 	u8 chunks;		/* same */
-	char data[0] __aligned(8);
+	char data[] __aligned(8);
 };
 
 struct skb_ext *__skb_ext_alloc(void);
diff --git a/include/linux/slab.h b/include/linux/slab.h
index 03a3893..6d45488 100644
--- a/include/linux/slab.h
+++ b/include/linux/slab.h
@@ -501,7 +501,7 @@ static __always_inline void *kmalloc_large(size_t size, gfp_t flags)
  * :ref:`Documentation/core-api/mm-api.rst <mm-api-gfp-flags>`
  *
  * The recommended usage of the @flags is described at
- * :ref:`Documentation/core-api/memory-allocation.rst <memory-allocation>`
+ * :ref:`Documentation/core-api/memory-allocation.rst <memory_allocation>`
  *
  * Below is a brief outline of the most useful GFP flags
  *
diff --git a/include/linux/soc/qcom/apr.h b/include/linux/soc/qcom/apr.h
index c5d52e2..7f0bc3c 100644
--- a/include/linux/soc/qcom/apr.h
+++ b/include/linux/soc/qcom/apr.h
@@ -85,6 +85,7 @@ struct apr_device {
 	uint16_t	domain_id;
 	uint32_t	version;
 	char name[APR_NAME_SIZE];
+	const char *service_path;
 	spinlock_t	lock;
 	struct list_head node;
 };
diff --git a/include/linux/soc/qcom/pdr.h b/include/linux/soc/qcom/pdr.h
new file mode 100644
index 0000000..83a8ea6
--- /dev/null
+++ b/include/linux/soc/qcom/pdr.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __QCOM_PDR_HELPER__
+#define __QCOM_PDR_HELPER__
+
+#include <linux/soc/qcom/qmi.h>
+
+#define SERVREG_NAME_LENGTH	64
+
+struct pdr_service;
+struct pdr_handle;
+
+enum servreg_service_state {
+	SERVREG_LOCATOR_ERR = 0x1,
+	SERVREG_SERVICE_STATE_DOWN = 0x0FFFFFFF,
+	SERVREG_SERVICE_STATE_UP = 0x1FFFFFFF,
+	SERVREG_SERVICE_STATE_EARLY_DOWN = 0x2FFFFFFF,
+	SERVREG_SERVICE_STATE_UNINIT = 0x7FFFFFFF,
+};
+
+struct pdr_handle *pdr_handle_alloc(void (*status)(int state,
+						   char *service_path,
+						   void *priv), void *priv);
+struct pdr_service *pdr_add_lookup(struct pdr_handle *pdr,
+				   const char *service_name,
+				   const char *service_path);
+int pdr_restart_pd(struct pdr_handle *pdr, struct pdr_service *pds);
+void pdr_handle_release(struct pdr_handle *pdr);
+
+#endif
diff --git a/include/linux/soc/qcom/qmi.h b/include/linux/soc/qcom/qmi.h
index 5efa2b6..e712f94 100644
--- a/include/linux/soc/qcom/qmi.h
+++ b/include/linux/soc/qcom/qmi.h
@@ -88,6 +88,7 @@ struct qmi_elem_info {
 #define QMI_ERR_CLIENT_IDS_EXHAUSTED_V01	5
 #define QMI_ERR_INVALID_ID_V01			41
 #define QMI_ERR_ENCODING_V01			58
+#define QMI_ERR_DISABLED_V01                    69
 #define QMI_ERR_INCOMPATIBLE_STATE_V01		90
 #define QMI_ERR_NOT_SUPPORTED_V01		94
 
diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h
index b451bb6..00f5826 100644
--- a/include/linux/soundwire/sdw.h
+++ b/include/linux/soundwire/sdw.h
@@ -80,6 +80,21 @@ enum sdw_slave_status {
 };
 
 /**
+ * enum sdw_clk_stop_type: clock stop operations
+ *
+ * @SDW_CLK_PRE_PREPARE: pre clock stop prepare
+ * @SDW_CLK_POST_PREPARE: post clock stop prepare
+ * @SDW_CLK_PRE_DEPREPARE: pre clock stop de-prepare
+ * @SDW_CLK_POST_DEPREPARE: post clock stop de-prepare
+ */
+enum sdw_clk_stop_type {
+	       SDW_CLK_PRE_PREPARE = 0,
+	       SDW_CLK_POST_PREPARE,
+	       SDW_CLK_PRE_DEPREPARE,
+	       SDW_CLK_POST_DEPREPARE,
+};
+
+/**
  * enum sdw_command_response - Command response as defined by SDW spec
  * @SDW_CMD_OK: cmd was successful
  * @SDW_CMD_IGNORED: cmd was ignored
@@ -284,6 +299,7 @@ struct sdw_dpn_audio_mode {
  * @max_async_buffer: Number of samples that this port can buffer in
  * asynchronous modes
  * @block_pack_mode: Type of block port mode supported
+ * @read_only_wordlength: Read Only wordlength field in DPN_BlockCtrl1 register
  * @port_encoding: Payload Channel Sample encoding schemes supported
  * @audio_modes: Audio modes supported
  */
@@ -307,6 +323,7 @@ struct sdw_dpn_prop {
 	u32 modes;
 	u32 max_async_buffer;
 	bool block_pack_mode;
+	bool read_only_wordlength;
 	u32 port_encoding;
 	struct sdw_dpn_audio_mode *audio_modes;
 };
@@ -424,6 +441,29 @@ struct sdw_slave_id {
 	__u8 sdw_version:4;
 };
 
+/*
+ * Helper macros to extract the MIPI-defined IDs
+ *
+ * Spec definition
+ *   Register		Bit	Contents
+ *   DevId_0 [7:4]	47:44	sdw_version
+ *   DevId_0 [3:0]	43:40	unique_id
+ *   DevId_1		39:32	mfg_id [15:8]
+ *   DevId_2		31:24	mfg_id [7:0]
+ *   DevId_3		23:16	part_id [15:8]
+ *   DevId_4		15:08	part_id [7:0]
+ *   DevId_5		07:00	class_id
+ *
+ * The MIPI DisCo for SoundWire defines in addition the link_id as bits 51:48
+ */
+
+#define SDW_DISCO_LINK_ID(adr)	(((adr) >> 48) & GENMASK(3, 0))
+#define SDW_VERSION(adr)	(((adr) >> 44) & GENMASK(3, 0))
+#define SDW_UNIQUE_ID(adr)	(((adr) >> 40) & GENMASK(3, 0))
+#define SDW_MFG_ID(adr)		(((adr) >> 24) & GENMASK(15, 0))
+#define SDW_PART_ID(adr)	(((adr) >> 8) & GENMASK(15, 0))
+#define SDW_CLASS_ID(adr)	((adr) & GENMASK(7, 0))
+
 /**
  * struct sdw_slave_intr_status - Slave interrupt status
  * @control_port: control port status
@@ -533,6 +573,11 @@ struct sdw_slave_ops {
 	int (*port_prep)(struct sdw_slave *slave,
 			 struct sdw_prepare_ch *prepare_ch,
 			 enum sdw_port_prep_ops pre_ops);
+	int (*get_clk_stop_mode)(struct sdw_slave *slave);
+	int (*clk_stop)(struct sdw_slave *slave,
+			enum sdw_clk_stop_mode mode,
+			enum sdw_clk_stop_type type);
+
 };
 
 /**
@@ -575,6 +620,7 @@ struct sdw_slave {
 #endif
 	struct list_head node;
 	struct completion *port_ready;
+	enum sdw_clk_stop_mode curr_clk_stop_mode;
 	u16 dev_num;
 	u16 dev_num_sticky;
 	bool probed;
@@ -892,6 +938,9 @@ int sdw_prepare_stream(struct sdw_stream_runtime *stream);
 int sdw_enable_stream(struct sdw_stream_runtime *stream);
 int sdw_disable_stream(struct sdw_stream_runtime *stream);
 int sdw_deprepare_stream(struct sdw_stream_runtime *stream);
+int sdw_bus_prep_clk_stop(struct sdw_bus *bus);
+int sdw_bus_clk_stop(struct sdw_bus *bus);
+int sdw_bus_exit_clk_stop(struct sdw_bus *bus);
 
 /* messaging and data APIs */
 
diff --git a/include/linux/spi/corgi_lcd.h b/include/linux/spi/corgi_lcd.h
index edf4bec..0b85761 100644
--- a/include/linux/spi/corgi_lcd.h
+++ b/include/linux/spi/corgi_lcd.h
@@ -11,9 +11,6 @@ struct corgi_lcd_platform_data {
 	int	default_intensity;
 	int	limit_mask;
 
-	int	gpio_backlight_on;	/* -1 if n/a */
-	int	gpio_backlight_cont;	/* -1 if n/a */
-
 	void (*notify)(int intensity);
 	void (*kick_battery)(void);
 };
diff --git a/include/linux/stackdepot.h b/include/linux/stackdepot.h
index 3efa97d..24d49c7 100644
--- a/include/linux/stackdepot.h
+++ b/include/linux/stackdepot.h
@@ -19,4 +19,6 @@ depot_stack_handle_t stack_depot_save(unsigned long *entries,
 unsigned int stack_depot_fetch(depot_stack_handle_t handle,
 			       unsigned long **entries);
 
+unsigned int filter_irq_stacks(unsigned long *entries, unsigned int nr_entries);
+
 #endif
diff --git a/include/linux/sunrpc/cache.h b/include/linux/sunrpc/cache.h
index 0f64de7..10891b7 100644
--- a/include/linux/sunrpc/cache.h
+++ b/include/linux/sunrpc/cache.h
@@ -179,6 +179,9 @@ sunrpc_cache_update(struct cache_detail *detail,
 
 extern int
 sunrpc_cache_pipe_upcall(struct cache_detail *detail, struct cache_head *h);
+extern int
+sunrpc_cache_pipe_upcall_timeout(struct cache_detail *detail,
+				 struct cache_head *h);
 
 
 extern void cache_clean_deferred(void *owner);
@@ -206,11 +209,11 @@ static inline void cache_put(struct cache_head *h, struct cache_detail *cd)
 
 static inline bool cache_is_expired(struct cache_detail *detail, struct cache_head *h)
 {
+	if (h->expiry_time < seconds_since_boot())
+		return true;
 	if (!test_bit(CACHE_VALID, &h->flags))
 		return false;
-
-	return  (h->expiry_time < seconds_since_boot()) ||
-		(detail->flush_time >= h->last_refresh);
+	return detail->flush_time >= h->last_refresh;
 }
 
 extern int cache_check(struct cache_detail *detail,
diff --git a/include/linux/sunrpc/rpc_rdma.h b/include/linux/sunrpc/rpc_rdma.h
index 92d182f..320c672d 100644
--- a/include/linux/sunrpc/rpc_rdma.h
+++ b/include/linux/sunrpc/rpc_rdma.h
@@ -58,7 +58,8 @@ enum {
 enum {
 	rpcrdma_fixed_maxsz	= 4,
 	rpcrdma_segment_maxsz	= 4,
-	rpcrdma_readchunk_maxsz	= 2 + rpcrdma_segment_maxsz,
+	rpcrdma_readseg_maxsz	= 1 + rpcrdma_segment_maxsz,
+	rpcrdma_readchunk_maxsz	= 1 + rpcrdma_readseg_maxsz,
 };
 
 /*
diff --git a/include/linux/sunrpc/sched.h b/include/linux/sunrpc/sched.h
index a6ef351..df696ef 100644
--- a/include/linux/sunrpc/sched.h
+++ b/include/linux/sunrpc/sched.h
@@ -132,6 +132,7 @@ struct rpc_task_setup {
 #define RPC_TASK_TIMEOUT	0x1000		/* fail with ETIMEDOUT on timeout */
 #define RPC_TASK_NOCONNECT	0x2000		/* return ENOTCONN if not connected */
 #define RPC_TASK_NO_RETRANS_TIMEOUT	0x4000		/* wait forever for a reply */
+#define RPC_TASK_CRED_NOREF	0x8000		/* No refcount on the credential */
 
 #define RPC_IS_ASYNC(t)		((t)->tk_flags & RPC_TASK_ASYNC)
 #define RPC_IS_SWAPPER(t)	((t)->tk_flags & RPC_TASK_SWAPPER)
diff --git a/include/linux/sunrpc/svc.h b/include/linux/sunrpc/svc.h
index 1afe38e..fd39089 100644
--- a/include/linux/sunrpc/svc.h
+++ b/include/linux/sunrpc/svc.h
@@ -380,7 +380,7 @@ struct svc_deferred_req {
 	struct cache_deferred_req handle;
 	size_t			xprt_hlen;
 	int			argslen;
-	__be32			args[0];
+	__be32			args[];
 };
 
 struct svc_process_info {
@@ -517,6 +517,9 @@ void		   svc_wake_up(struct svc_serv *);
 void		   svc_reserve(struct svc_rqst *rqstp, int space);
 struct svc_pool *  svc_pool_for_cpu(struct svc_serv *serv, int cpu);
 char *		   svc_print_addr(struct svc_rqst *, char *, size_t);
+int		   svc_encode_read_payload(struct svc_rqst *rqstp,
+					   unsigned int offset,
+					   unsigned int length);
 unsigned int	   svc_fill_write_vector(struct svc_rqst *rqstp,
 					 struct page **pages,
 					 struct kvec *first, size_t total);
diff --git a/include/linux/sunrpc/svc_rdma.h b/include/linux/sunrpc/svc_rdma.h
index 40f6588..78fe2ac 100644
--- a/include/linux/sunrpc/svc_rdma.h
+++ b/include/linux/sunrpc/svc_rdma.h
@@ -52,6 +52,7 @@
 
 /* Default and maximum inline threshold sizes */
 enum {
+	RPCRDMA_PULLUP_THRESH = RPCRDMA_V1_DEF_INLINE_SIZE >> 1,
 	RPCRDMA_DEF_INLINE_THRESH = 4096,
 	RPCRDMA_MAX_INLINE_THRESH = 65536
 };
@@ -132,11 +133,16 @@ struct svc_rdma_recv_ctxt {
 	struct ib_sge		rc_recv_sge;
 	void			*rc_recv_buf;
 	struct xdr_buf		rc_arg;
+	struct xdr_stream	rc_stream;
 	bool			rc_temp;
 	u32			rc_byte_len;
 	unsigned int		rc_page_count;
 	unsigned int		rc_hdr_count;
 	u32			rc_inv_rkey;
+	__be32			*rc_write_list;
+	__be32			*rc_reply_chunk;
+	unsigned int		rc_read_payload_offset;
+	unsigned int		rc_read_payload_length;
 	struct page		*rc_pages[RPCSVC_MAXPAGES];
 };
 
@@ -144,6 +150,8 @@ struct svc_rdma_send_ctxt {
 	struct list_head	sc_list;
 	struct ib_send_wr	sc_send_wr;
 	struct ib_cqe		sc_cqe;
+	struct xdr_buf		sc_hdrbuf;
+	struct xdr_stream	sc_stream;
 	void			*sc_xprt_buf;
 	int			sc_page_count;
 	int			sc_cur_sge_no;
@@ -170,9 +178,11 @@ extern int svc_rdma_recv_read_chunk(struct svcxprt_rdma *rdma,
 				    struct svc_rqst *rqstp,
 				    struct svc_rdma_recv_ctxt *head, __be32 *p);
 extern int svc_rdma_send_write_chunk(struct svcxprt_rdma *rdma,
-				     __be32 *wr_ch, struct xdr_buf *xdr);
+				     __be32 *wr_ch, struct xdr_buf *xdr,
+				     unsigned int offset,
+				     unsigned long length);
 extern int svc_rdma_send_reply_chunk(struct svcxprt_rdma *rdma,
-				     __be32 *rp_ch, bool writelist,
+				     const struct svc_rdma_recv_ctxt *rctxt,
 				     struct xdr_buf *xdr);
 
 /* svc_rdma_sendto.c */
@@ -182,13 +192,13 @@ extern struct svc_rdma_send_ctxt *
 extern void svc_rdma_send_ctxt_put(struct svcxprt_rdma *rdma,
 				   struct svc_rdma_send_ctxt *ctxt);
 extern int svc_rdma_send(struct svcxprt_rdma *rdma, struct ib_send_wr *wr);
-extern void svc_rdma_sync_reply_hdr(struct svcxprt_rdma *rdma,
-				    struct svc_rdma_send_ctxt *ctxt,
-				    unsigned int len);
 extern int svc_rdma_map_reply_msg(struct svcxprt_rdma *rdma,
-				  struct svc_rdma_send_ctxt *ctxt,
-				  struct xdr_buf *xdr, __be32 *wr_lst);
+				  struct svc_rdma_send_ctxt *sctxt,
+				  const struct svc_rdma_recv_ctxt *rctxt,
+				  struct xdr_buf *xdr);
 extern int svc_rdma_sendto(struct svc_rqst *);
+extern int svc_rdma_read_payload(struct svc_rqst *rqstp, unsigned int offset,
+				 unsigned int length);
 
 /* svc_rdma_transport.c */
 extern int svc_rdma_create_listen(struct svc_serv *, int, struct sockaddr *);
diff --git a/include/linux/sunrpc/svc_xprt.h b/include/linux/sunrpc/svc_xprt.h
index ea6f46b..9e1e046 100644
--- a/include/linux/sunrpc/svc_xprt.h
+++ b/include/linux/sunrpc/svc_xprt.h
@@ -21,6 +21,8 @@ struct svc_xprt_ops {
 	int		(*xpo_has_wspace)(struct svc_xprt *);
 	int		(*xpo_recvfrom)(struct svc_rqst *);
 	int		(*xpo_sendto)(struct svc_rqst *);
+	int		(*xpo_read_payload)(struct svc_rqst *, unsigned int,
+					    unsigned int);
 	void		(*xpo_release_rqst)(struct svc_rqst *);
 	void		(*xpo_detach)(struct svc_xprt *);
 	void		(*xpo_free)(struct svc_xprt *);
diff --git a/include/linux/sunrpc/xdr.h b/include/linux/sunrpc/xdr.h
index b41f349..01bb419 100644
--- a/include/linux/sunrpc/xdr.h
+++ b/include/linux/sunrpc/xdr.h
@@ -184,24 +184,9 @@ xdr_adjust_iovec(struct kvec *iov, __be32 *p)
 extern void xdr_shift_buf(struct xdr_buf *, size_t);
 extern void xdr_buf_from_iov(struct kvec *, struct xdr_buf *);
 extern int xdr_buf_subsegment(struct xdr_buf *, struct xdr_buf *, unsigned int, unsigned int);
-extern int xdr_buf_read_mic(struct xdr_buf *, struct xdr_netobj *, unsigned int);
 extern int read_bytes_from_xdr_buf(struct xdr_buf *, unsigned int, void *, unsigned int);
 extern int write_bytes_to_xdr_buf(struct xdr_buf *, unsigned int, void *, unsigned int);
 
-/*
- * Helper structure for copying from an sk_buff.
- */
-struct xdr_skb_reader {
-	struct sk_buff	*skb;
-	unsigned int	offset;
-	size_t		count;
-	__wsum		csum;
-};
-
-typedef size_t (*xdr_skb_read_actor)(struct xdr_skb_reader *desc, void *to, size_t len);
-
-extern int csum_partial_copy_to_xdr(struct xdr_buf *, struct sk_buff *);
-
 extern int xdr_encode_word(struct xdr_buf *, unsigned int, u32);
 extern int xdr_decode_word(struct xdr_buf *, unsigned int, u32 *);
 
@@ -301,6 +286,59 @@ xdr_align_size(size_t n)
 }
 
 /**
+ * xdr_pad_size - Calculate size of an object's pad
+ * @n: Size of an object being XDR encoded (in bytes)
+ *
+ * This implementation avoids the need for conditional
+ * branches or modulo division.
+ *
+ * Return value:
+ *   Size (in bytes) of the needed XDR pad
+ */
+static inline size_t xdr_pad_size(size_t n)
+{
+	return xdr_align_size(n) - n;
+}
+
+/**
+ * xdr_stream_encode_item_present - Encode a "present" list item
+ * @xdr: pointer to xdr_stream
+ *
+ * Return values:
+ *   On success, returns length in bytes of XDR buffer consumed
+ *   %-EMSGSIZE on XDR buffer overflow
+ */
+static inline ssize_t xdr_stream_encode_item_present(struct xdr_stream *xdr)
+{
+	const size_t len = sizeof(__be32);
+	__be32 *p = xdr_reserve_space(xdr, len);
+
+	if (unlikely(!p))
+		return -EMSGSIZE;
+	*p = xdr_one;
+	return len;
+}
+
+/**
+ * xdr_stream_encode_item_absent - Encode a "not present" list item
+ * @xdr: pointer to xdr_stream
+ *
+ * Return values:
+ *   On success, returns length in bytes of XDR buffer consumed
+ *   %-EMSGSIZE on XDR buffer overflow
+ */
+static inline int xdr_stream_encode_item_absent(struct xdr_stream *xdr)
+{
+	const size_t len = sizeof(__be32);
+	__be32 *p = xdr_reserve_space(xdr, len);
+
+	if (unlikely(!p))
+		return -EMSGSIZE;
+	*p = xdr_zero;
+	return len;
+}
+
+/**
  * xdr_stream_encode_u32 - Encode a 32-bit integer
  * @xdr: pointer to xdr_stream
  * @n: integer to encode
diff --git a/include/linux/suspend.h b/include/linux/suspend.h
index 2b2055b..4fcc6fd 100644
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -566,38 +566,4 @@ static inline void queue_up_suspend_work(void) {}
 
 #endif /* !CONFIG_PM_AUTOSLEEP */
 
-#ifdef CONFIG_ARCH_SAVE_PAGE_KEYS
-/*
- * The ARCH_SAVE_PAGE_KEYS functions can be used by an architecture
- * to save/restore additional information to/from the array of page
- * frame numbers in the hibernation image. For s390 this is used to
- * save and restore the storage key for each page that is included
- * in the hibernation image.
- */
-unsigned long page_key_additional_pages(unsigned long pages);
-int page_key_alloc(unsigned long pages);
-void page_key_free(void);
-void page_key_read(unsigned long *pfn);
-void page_key_memorize(unsigned long *pfn);
-void page_key_write(void *address);
-
-#else /* !CONFIG_ARCH_SAVE_PAGE_KEYS */
-
-static inline unsigned long page_key_additional_pages(unsigned long pages)
-{
-	return 0;
-}
-
-static inline int  page_key_alloc(unsigned long pages)
-{
-	return 0;
-}
-
-static inline void page_key_free(void) {}
-static inline void page_key_read(unsigned long *pfn) {}
-static inline void page_key_memorize(unsigned long *pfn) {}
-static inline void page_key_write(void *address) {}
-
-#endif /* !CONFIG_ARCH_SAVE_PAGE_KEYS */
-
 #endif /* _LINUX_SUSPEND_H */
diff --git a/include/linux/swap.h b/include/linux/swap.h
index b835d8d..e1bbf7a 100644
--- a/include/linux/swap.h
+++ b/include/linux/swap.h
@@ -275,7 +275,7 @@ struct swap_info_struct {
 					 */
 	struct work_struct discard_work; /* discard worker */
 	struct swap_cluster_list discard_clusters; /* discard clusters list */
-	struct plist_node avail_lists[0]; /*
+	struct plist_node avail_lists[]; /*
 					   * entries in swap_avail_heads, one
 					   * entry per node.
 					   * Must be last as the number of the
diff --git a/include/linux/swapops.h b/include/linux/swapops.h
index 877fd23..d9b7c91 100644
--- a/include/linux/swapops.h
+++ b/include/linux/swapops.h
@@ -68,6 +68,8 @@ static inline swp_entry_t pte_to_swp_entry(pte_t pte)
 
 	if (pte_swp_soft_dirty(pte))
 		pte = pte_swp_clear_soft_dirty(pte);
+	if (pte_swp_uffd_wp(pte))
+		pte = pte_swp_clear_uffd_wp(pte);
 	arch_entry = __pte_to_swp_entry(pte);
 	return swp_entry(__swp_type(arch_entry), __swp_offset(arch_entry));
 }
@@ -348,7 +350,8 @@ static inline void num_poisoned_pages_inc(void)
 }
 #endif
 
-#if defined(CONFIG_MEMORY_FAILURE) || defined(CONFIG_MIGRATION)
+#if defined(CONFIG_MEMORY_FAILURE) || defined(CONFIG_MIGRATION) || \
+    defined(CONFIG_DEVICE_PRIVATE)
 static inline int non_swap_entry(swp_entry_t entry)
 {
 	return swp_type(entry) >= MAX_SWAPFILES;
diff --git a/include/linux/sysfs.h b/include/linux/sysfs.h
index 4beb510..80bb865 100644
--- a/include/linux/sysfs.h
+++ b/include/linux/sysfs.h
@@ -297,9 +297,10 @@ int sysfs_add_link_to_group(struct kobject *kobj, const char *group_name,
 			    struct kobject *target, const char *link_name);
 void sysfs_remove_link_from_group(struct kobject *kobj, const char *group_name,
 				  const char *link_name);
-int __compat_only_sysfs_link_entry_to_kobj(struct kobject *kobj,
-				      struct kobject *target_kobj,
-				      const char *target_name);
+int compat_only_sysfs_link_entry_to_kobj(struct kobject *kobj,
+					 struct kobject *target_kobj,
+					 const char *target_name,
+					 const char *symlink_name);
 
 void sysfs_notify(struct kobject *kobj, const char *dir, const char *attr);
 
@@ -512,10 +513,10 @@ static inline void sysfs_remove_link_from_group(struct kobject *kobj,
 {
 }
 
-static inline int __compat_only_sysfs_link_entry_to_kobj(
-	struct kobject *kobj,
-	struct kobject *target_kobj,
-	const char *target_name)
+static inline int compat_only_sysfs_link_entry_to_kobj(struct kobject *kobj,
+						       struct kobject *target_kobj,
+						       const char *target_name,
+						       const char *symlink_name)
 {
 	return 0;
 }
diff --git a/include/linux/tee_drv.h b/include/linux/tee_drv.h
index 7a03f68..1412e9c 100644
--- a/include/linux/tee_drv.h
+++ b/include/linux/tee_drv.h
@@ -49,7 +49,6 @@ struct tee_shm_pool;
  */
 struct tee_context {
 	struct tee_device *teedev;
-	struct list_head list_shm;
 	void *data;
 	struct kref refcount;
 	bool releasing;
@@ -168,9 +167,7 @@ void tee_device_unregister(struct tee_device *teedev);
 
 /**
  * struct tee_shm - shared memory object
- * @teedev:	device used to allocate the object
- * @ctx:	context using the object, if NULL the context is gone
- * @link	link element
+ * @ctx:	context using the object
  * @paddr:	physical address of the shared memory
  * @kaddr:	virtual address of the shared memory
  * @size:	size of shared memory
@@ -185,9 +182,7 @@ void tee_device_unregister(struct tee_device *teedev);
  * subsystem and from drivers that implements their own shm pool manager.
  */
 struct tee_shm {
-	struct tee_device *teedev;
 	struct tee_context *ctx;
-	struct list_head link;
 	phys_addr_t paddr;
 	void *kaddr;
 	size_t size;
@@ -319,18 +314,6 @@ void *tee_get_drvdata(struct tee_device *teedev);
 struct tee_shm *tee_shm_alloc(struct tee_context *ctx, size_t size, u32 flags);
 
 /**
- * tee_shm_priv_alloc() - Allocate shared memory privately
- * @dev:	Device that allocates the shared memory
- * @size:	Requested size of shared memory
- *
- * Allocates shared memory buffer that is not associated with any client
- * context. Such buffers are owned by TEE driver and used for internal calls.
- *
- * @returns a pointer to 'struct tee_shm'
- */
-struct tee_shm *tee_shm_priv_alloc(struct tee_device *teedev, size_t size);
-
-/**
  * tee_shm_register() - Register shared memory buffer
  * @ctx:	Context that registers the shared memory
  * @addr:	Address is userspace of the shared buffer
diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index 126913c6..c91b1e3 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -364,6 +364,9 @@ struct thermal_trip {
 
 /* Function declarations */
 #ifdef CONFIG_THERMAL_OF
+int thermal_zone_of_get_sensor_id(struct device_node *tz_np,
+				  struct device_node *sensor_np,
+				  u32 *id);
 struct thermal_zone_device *
 thermal_zone_of_sensor_register(struct device *dev, int id, void *data,
 				const struct thermal_zone_of_device_ops *ops);
@@ -375,6 +378,13 @@ struct thermal_zone_device *devm_thermal_zone_of_sensor_register(
 void devm_thermal_zone_of_sensor_unregister(struct device *dev,
 					    struct thermal_zone_device *tz);
 #else
+
+static inline int thermal_zone_of_get_sensor_id(struct device_node *tz_np,
+					 struct device_node *sensor_np,
+					 u32 *id)
+{
+	return -ENOENT;
+}
 static inline struct thermal_zone_device *
 thermal_zone_of_sensor_register(struct device *dev, int id, void *data,
 				const struct thermal_zone_of_device_ops *ops)
diff --git a/include/linux/ti_wilink_st.h b/include/linux/ti_wilink_st.h
index eb6cbdf..44a7f91 100644
--- a/include/linux/ti_wilink_st.h
+++ b/include/linux/ti_wilink_st.h
@@ -295,7 +295,7 @@ struct bts_header {
 	u32 magic;
 	u32 version;
 	u8 future[24];
-	u8 actions[0];
+	u8 actions[];
 } __attribute__ ((packed));
 
 /**
@@ -305,7 +305,7 @@ struct bts_header {
 struct bts_action {
 	u16 type;
 	u16 size;
-	u8 data[0];
+	u8 data[];
 } __attribute__ ((packed));
 
 struct bts_action_send {
@@ -315,7 +315,7 @@ struct bts_action_send {
 struct bts_action_wait {
 	u32 msec;
 	u32 size;
-	u8 data[0];
+	u8 data[];
 } __attribute__ ((packed));
 
 struct bts_action_delay {
diff --git a/include/linux/tpm_eventlog.h b/include/linux/tpm_eventlog.h
index 131ea1b..c253461 100644
--- a/include/linux/tpm_eventlog.h
+++ b/include/linux/tpm_eventlog.h
@@ -28,7 +28,7 @@ struct tcpa_event {
 	u32 event_type;
 	u8 pcr_value[20];	/* SHA1 */
 	u32 event_size;
-	u8 event_data[0];
+	u8 event_data[];
 };
 
 enum tcpa_event_types {
@@ -55,7 +55,7 @@ enum tcpa_event_types {
 struct tcpa_pc_event {
 	u32 event_id;
 	u32 event_size;
-	u8 event_data[0];
+	u8 event_data[];
 };
 
 enum tcpa_pc_event_ids {
@@ -102,7 +102,7 @@ struct tcg_pcr_event {
 
 struct tcg_event_field {
 	u32 event_size;
-	u8 event[0];
+	u8 event[];
 } __packed;
 
 struct tcg_pcr_event2_head {
diff --git a/include/linux/trace_events.h b/include/linux/trace_events.h
index 6c7a10a..5c69433 100644
--- a/include/linux/trace_events.h
+++ b/include/linux/trace_events.h
@@ -85,6 +85,8 @@ struct trace_iterator {
 	struct mutex		mutex;
 	struct ring_buffer_iter	**buffer_iter;
 	unsigned long		iter_flags;
+	void			*temp;	/* temp holder */
+	unsigned int		temp_size;
 
 	/* trace_seq for __print_flags() and __print_symbolic() etc. */
 	struct trace_seq	tmp_seq;
diff --git a/include/linux/uio_driver.h b/include/linux/uio_driver.h
index 01081c4..54bf6b1 100644
--- a/include/linux/uio_driver.h
+++ b/include/linux/uio_driver.h
@@ -24,10 +24,10 @@ struct uio_map;
  * struct uio_mem - description of a UIO memory region
  * @name:		name of the memory region for identification
  * @addr:               address of the device's memory rounded to page
- * 			size (phys_addr is used since addr can be
- * 			logical, virtual, or physical & phys_addr_t
- * 			should always be large enough to handle any of
- * 			the address types)
+ *			size (phys_addr is used since addr can be
+ *			logical, virtual, or physical & phys_addr_t
+ *			should always be large enough to handle any of
+ *			the address types)
  * @offs:               offset of device memory within the page
  * @size:		size of IO (multiple of page size)
  * @memtype:		type of memory addr points to
@@ -67,16 +67,16 @@ struct uio_port {
 #define MAX_UIO_PORT_REGIONS	5
 
 struct uio_device {
-        struct module           *owner;
+	struct module           *owner;
 	struct device		dev;
-        int                     minor;
-        atomic_t                event;
-        struct fasync_struct    *async_queue;
-        wait_queue_head_t       wait;
-        struct uio_info         *info;
+	int                     minor;
+	atomic_t                event;
+	struct fasync_struct    *async_queue;
+	wait_queue_head_t       wait;
+	struct uio_info         *info;
 	struct mutex		info_lock;
-        struct kobject          *map_dir;
-        struct kobject          *portio_dir;
+	struct kobject          *map_dir;
+	struct kobject          *portio_dir;
 };
 
 /**
@@ -123,6 +123,15 @@ extern int __must_check
 extern void uio_unregister_device(struct uio_info *info);
 extern void uio_event_notify(struct uio_info *info);
 
+extern int __must_check
+	__devm_uio_register_device(struct module *owner,
+				   struct device *parent,
+				   struct uio_info *info);
+
+/* use a define to avoid include chaining to get THIS_MODULE */
+#define devm_uio_register_device(parent, info) \
+	__devm_uio_register_device(THIS_MODULE, parent, info)
+
 /* defines for uio_info->irq */
 #define UIO_IRQ_CUSTOM	-1
 #define UIO_IRQ_NONE	0
diff --git a/include/linux/unaligned/be_byteshift.h b/include/linux/unaligned/be_byteshift.h
index 8bdb8fa..c43ff59 100644
--- a/include/linux/unaligned/be_byteshift.h
+++ b/include/linux/unaligned/be_byteshift.h
@@ -40,17 +40,17 @@ static inline void __put_unaligned_be64(u64 val, u8 *p)
 
 static inline u16 get_unaligned_be16(const void *p)
 {
-	return __get_unaligned_be16((const u8 *)p);
+	return __get_unaligned_be16(p);
 }
 
 static inline u32 get_unaligned_be32(const void *p)
 {
-	return __get_unaligned_be32((const u8 *)p);
+	return __get_unaligned_be32(p);
 }
 
 static inline u64 get_unaligned_be64(const void *p)
 {
-	return __get_unaligned_be64((const u8 *)p);
+	return __get_unaligned_be64(p);
 }
 
 static inline void put_unaligned_be16(u16 val, void *p)
diff --git a/include/linux/unaligned/generic.h b/include/linux/unaligned/generic.h
index 57d3114..30328949 100644
--- a/include/linux/unaligned/generic.h
+++ b/include/linux/unaligned/generic.h
@@ -2,6 +2,8 @@
 #ifndef _LINUX_UNALIGNED_GENERIC_H
 #define _LINUX_UNALIGNED_GENERIC_H
 
+#include <linux/types.h>
+
 /*
  * Cause a link-time error if we try an unaligned access other than
  * 1,2,4 or 8 bytes long
@@ -66,4 +68,48 @@ extern void __bad_unaligned_access_size(void);
 	}								\
 	(void)0; })
 
+static inline u32 __get_unaligned_be24(const u8 *p)
+{
+	return p[0] << 16 | p[1] << 8 | p[2];
+}
+
+static inline u32 get_unaligned_be24(const void *p)
+{
+	return __get_unaligned_be24(p);
+}
+
+static inline u32 __get_unaligned_le24(const u8 *p)
+{
+	return p[0] | p[1] << 8 | p[2] << 16;
+}
+
+static inline u32 get_unaligned_le24(const void *p)
+{
+	return __get_unaligned_le24(p);
+}
+
+static inline void __put_unaligned_be24(const u32 val, u8 *p)
+{
+	*p++ = val >> 16;
+	*p++ = val >> 8;
+	*p++ = val;
+}
+
+static inline void put_unaligned_be24(const u32 val, void *p)
+{
+	__put_unaligned_be24(val, p);
+}
+
+static inline void __put_unaligned_le24(const u32 val, u8 *p)
+{
+	*p++ = val;
+	*p++ = val >> 8;
+	*p++ = val >> 16;
+}
+
+static inline void put_unaligned_le24(const u32 val, void *p)
+{
+	__put_unaligned_le24(val, p);
+}
+
 #endif /* _LINUX_UNALIGNED_GENERIC_H */
diff --git a/include/linux/unaligned/le_byteshift.h b/include/linux/unaligned/le_byteshift.h
index 1628b75..2248dcb 100644
--- a/include/linux/unaligned/le_byteshift.h
+++ b/include/linux/unaligned/le_byteshift.h
@@ -40,17 +40,17 @@ static inline void __put_unaligned_le64(u64 val, u8 *p)
 
 static inline u16 get_unaligned_le16(const void *p)
 {
-	return __get_unaligned_le16((const u8 *)p);
+	return __get_unaligned_le16(p);
 }
 
 static inline u32 get_unaligned_le32(const void *p)
 {
-	return __get_unaligned_le32((const u8 *)p);
+	return __get_unaligned_le32(p);
 }
 
 static inline u64 get_unaligned_le64(const void *p)
 {
-	return __get_unaligned_le64((const u8 *)p);
+	return __get_unaligned_le64(p);
 }
 
 static inline void put_unaligned_le16(u16 val, void *p)
diff --git a/include/linux/usb/audio-v2.h b/include/linux/usb/audio-v2.h
index 5e31740..ead8c9a 100644
--- a/include/linux/usb/audio-v2.h
+++ b/include/linux/usb/audio-v2.h
@@ -156,6 +156,18 @@ struct uac2_feature_unit_descriptor {
 	__u8 bmaControls[]; /* variable length */
 } __attribute__((packed));
 
+/* 4.7.2.10 Effect Unit Descriptor */
+
+struct uac2_effect_unit_descriptor {
+	__u8 bLength;
+	__u8 bDescriptorType;
+	__u8 bDescriptorSubtype;
+	__u8 bUnitID;
+	__le16 wEffectType;
+	__u8 bSourceID;
+	__u8 bmaControls[]; /* variable length */
+} __attribute__((packed));
+
 /* 4.9.2 Class-Specific AS Interface Descriptor */
 
 struct uac2_as_header_descriptor {
diff --git a/include/linux/userfaultfd_k.h b/include/linux/userfaultfd_k.h
index ac9d71e..a8e5f3e 100644
--- a/include/linux/userfaultfd_k.h
+++ b/include/linux/userfaultfd_k.h
@@ -14,6 +14,8 @@
 #include <linux/userfaultfd.h> /* linux/include/uapi/linux/userfaultfd.h */
 
 #include <linux/fcntl.h>
+#include <linux/mm.h>
+#include <asm-generic/pgtable_uffd.h>
 
 /*
  * CAREFUL: Check include/uapi/asm-generic/fcntl.h when defining
@@ -34,11 +36,14 @@ extern vm_fault_t handle_userfault(struct vm_fault *vmf, unsigned long reason);
 
 extern ssize_t mcopy_atomic(struct mm_struct *dst_mm, unsigned long dst_start,
 			    unsigned long src_start, unsigned long len,
-			    bool *mmap_changing);
+			    bool *mmap_changing, __u64 mode);
 extern ssize_t mfill_zeropage(struct mm_struct *dst_mm,
 			      unsigned long dst_start,
 			      unsigned long len,
 			      bool *mmap_changing);
+extern int mwriteprotect_range(struct mm_struct *dst_mm,
+			       unsigned long start, unsigned long len,
+			       bool enable_wp, bool *mmap_changing);
 
 /* mm helpers */
 static inline bool is_mergeable_vm_userfaultfd_ctx(struct vm_area_struct *vma,
@@ -52,6 +57,23 @@ static inline bool userfaultfd_missing(struct vm_area_struct *vma)
 	return vma->vm_flags & VM_UFFD_MISSING;
 }
 
+static inline bool userfaultfd_wp(struct vm_area_struct *vma)
+{
+	return vma->vm_flags & VM_UFFD_WP;
+}
+
+static inline bool userfaultfd_pte_wp(struct vm_area_struct *vma,
+				      pte_t pte)
+{
+	return userfaultfd_wp(vma) && pte_uffd_wp(pte);
+}
+
+static inline bool userfaultfd_huge_pmd_wp(struct vm_area_struct *vma,
+					   pmd_t pmd)
+{
+	return userfaultfd_wp(vma) && pmd_uffd_wp(pmd);
+}
+
 static inline bool userfaultfd_armed(struct vm_area_struct *vma)
 {
 	return vma->vm_flags & (VM_UFFD_MISSING | VM_UFFD_WP);
@@ -96,6 +118,24 @@ static inline bool userfaultfd_missing(struct vm_area_struct *vma)
 	return false;
 }
 
+static inline bool userfaultfd_wp(struct vm_area_struct *vma)
+{
+	return false;
+}
+
+static inline bool userfaultfd_pte_wp(struct vm_area_struct *vma,
+				      pte_t pte)
+{
+	return false;
+}
+
+static inline bool userfaultfd_huge_pmd_wp(struct vm_area_struct *vma,
+					   pmd_t pmd)
+{
+	return false;
+}
+
+
 static inline bool userfaultfd_armed(struct vm_area_struct *vma)
 {
 	return false;
diff --git a/include/linux/vdpa.h b/include/linux/vdpa.h
new file mode 100644
index 0000000..733acfb
--- /dev/null
+++ b/include/linux/vdpa.h
@@ -0,0 +1,253 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _LINUX_VDPA_H
+#define _LINUX_VDPA_H
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/vhost_iotlb.h>
+
+/**
+ * vDPA callback definition.
+ * @callback: interrupt callback function
+ * @private: the data passed to the callback function
+ */
+struct vdpa_callback {
+	irqreturn_t (*callback)(void *data);
+	void *private;
+};
+
+/**
+ * vDPA device - representation of a vDPA device
+ * @dev: underlying device
+ * @dma_dev: the actual device that is performing DMA
+ * @config: the configuration ops for this device.
+ * @index: device index
+ */
+struct vdpa_device {
+	struct device dev;
+	struct device *dma_dev;
+	const struct vdpa_config_ops *config;
+	unsigned int index;
+};
+
+/**
+ * vDPA_config_ops - operations for configuring a vDPA device.
+ * Note: vDPA device drivers are required to implement all of the
+ * operations unless it is mentioned to be optional in the following
+ * list.
+ *
+ * @set_vq_address:		Set the address of virtqueue
+ *				@vdev: vdpa device
+ *				@idx: virtqueue index
+ *				@desc_area: address of desc area
+ *				@driver_area: address of driver area
+ *				@device_area: address of device area
+ *				Returns integer: success (0) or error (< 0)
+ * @set_vq_num:			Set the size of virtqueue
+ *				@vdev: vdpa device
+ *				@idx: virtqueue index
+ *				@num: the size of virtqueue
+ * @kick_vq:			Kick the virtqueue
+ *				@vdev: vdpa device
+ *				@idx: virtqueue index
+ * @set_vq_cb:			Set the interrupt callback function for
+ *				a virtqueue
+ *				@vdev: vdpa device
+ *				@idx: virtqueue index
+ *				@cb: virtio-vdev interrupt callback structure
+ * @set_vq_ready:		Set ready status for a virtqueue
+ *				@vdev: vdpa device
+ *				@idx: virtqueue index
+ *				@ready: ready (true) not ready(false)
+ * @get_vq_ready:		Get ready status for a virtqueue
+ *				@vdev: vdpa device
+ *				@idx: virtqueue index
+ *				Returns boolean: ready (true) or not (false)
+ * @set_vq_state:		Set the state for a virtqueue
+ *				@vdev: vdpa device
+ *				@idx: virtqueue index
+ *				@state: virtqueue state (last_avail_idx)
+ *				Returns integer: success (0) or error (< 0)
+ * @get_vq_state:		Get the state for a virtqueue
+ *				@vdev: vdpa device
+ *				@idx: virtqueue index
+ *				Returns virtqueue state (last_avail_idx)
+ * @get_vq_align:		Get the virtqueue align requirement
+ *				for the device
+ *				@vdev: vdpa device
+ *				Returns virtqueue algin requirement
+ * @get_features:		Get virtio features supported by the device
+ *				@vdev: vdpa device
+ *				Returns the virtio features support by the
+ *				device
+ * @set_features:		Set virtio features supported by the driver
+ *				@vdev: vdpa device
+ *				@features: feature support by the driver
+ *				Returns integer: success (0) or error (< 0)
+ * @set_config_cb:		Set the config interrupt callback
+ *				@vdev: vdpa device
+ *				@cb: virtio-vdev interrupt callback structure
+ * @get_vq_num_max:		Get the max size of virtqueue
+ *				@vdev: vdpa device
+ *				Returns u16: max size of virtqueue
+ * @get_device_id:		Get virtio device id
+ *				@vdev: vdpa device
+ *				Returns u32: virtio device id
+ * @get_vendor_id:		Get id for the vendor that provides this device
+ *				@vdev: vdpa device
+ *				Returns u32: virtio vendor id
+ * @get_status:			Get the device status
+ *				@vdev: vdpa device
+ *				Returns u8: virtio device status
+ * @set_status:			Set the device status
+ *				@vdev: vdpa device
+ *				@status: virtio device status
+ * @get_config:			Read from device specific configuration space
+ *				@vdev: vdpa device
+ *				@offset: offset from the beginning of
+ *				configuration space
+ *				@buf: buffer used to read to
+ *				@len: the length to read from
+ *				configuration space
+ * @set_config:			Write to device specific configuration space
+ *				@vdev: vdpa device
+ *				@offset: offset from the beginning of
+ *				configuration space
+ *				@buf: buffer used to write from
+ *				@len: the length to write to
+ *				configuration space
+ * @get_generation:		Get device config generation (optional)
+ *				@vdev: vdpa device
+ *				Returns u32: device generation
+ * @set_map:			Set device memory mapping (optional)
+ *				Needed for device that using device
+ *				specific DMA translation (on-chip IOMMU)
+ *				@vdev: vdpa device
+ *				@iotlb: vhost memory mapping to be
+ *				used by the vDPA
+ *				Returns integer: success (0) or error (< 0)
+ * @dma_map:			Map an area of PA to IOVA (optional)
+ *				Needed for device that using device
+ *				specific DMA translation (on-chip IOMMU)
+ *				and preferring incremental map.
+ *				@vdev: vdpa device
+ *				@iova: iova to be mapped
+ *				@size: size of the area
+ *				@pa: physical address for the map
+ *				@perm: device access permission (VHOST_MAP_XX)
+ *				Returns integer: success (0) or error (< 0)
+ * @dma_unmap:			Unmap an area of IOVA (optional but
+ *				must be implemented with dma_map)
+ *				Needed for device that using device
+ *				specific DMA translation (on-chip IOMMU)
+ *				and preferring incremental unmap.
+ *				@vdev: vdpa device
+ *				@iova: iova to be unmapped
+ *				@size: size of the area
+ *				Returns integer: success (0) or error (< 0)
+ * @free:			Free resources that belongs to vDPA (optional)
+ *				@vdev: vdpa device
+ */
+struct vdpa_config_ops {
+	/* Virtqueue ops */
+	int (*set_vq_address)(struct vdpa_device *vdev,
+			      u16 idx, u64 desc_area, u64 driver_area,
+			      u64 device_area);
+	void (*set_vq_num)(struct vdpa_device *vdev, u16 idx, u32 num);
+	void (*kick_vq)(struct vdpa_device *vdev, u16 idx);
+	void (*set_vq_cb)(struct vdpa_device *vdev, u16 idx,
+			  struct vdpa_callback *cb);
+	void (*set_vq_ready)(struct vdpa_device *vdev, u16 idx, bool ready);
+	bool (*get_vq_ready)(struct vdpa_device *vdev, u16 idx);
+	int (*set_vq_state)(struct vdpa_device *vdev, u16 idx, u64 state);
+	u64 (*get_vq_state)(struct vdpa_device *vdev, u16 idx);
+
+	/* Device ops */
+	u16 (*get_vq_align)(struct vdpa_device *vdev);
+	u64 (*get_features)(struct vdpa_device *vdev);
+	int (*set_features)(struct vdpa_device *vdev, u64 features);
+	void (*set_config_cb)(struct vdpa_device *vdev,
+			      struct vdpa_callback *cb);
+	u16 (*get_vq_num_max)(struct vdpa_device *vdev);
+	u32 (*get_device_id)(struct vdpa_device *vdev);
+	u32 (*get_vendor_id)(struct vdpa_device *vdev);
+	u8 (*get_status)(struct vdpa_device *vdev);
+	void (*set_status)(struct vdpa_device *vdev, u8 status);
+	void (*get_config)(struct vdpa_device *vdev, unsigned int offset,
+			   void *buf, unsigned int len);
+	void (*set_config)(struct vdpa_device *vdev, unsigned int offset,
+			   const void *buf, unsigned int len);
+	u32 (*get_generation)(struct vdpa_device *vdev);
+
+	/* DMA ops */
+	int (*set_map)(struct vdpa_device *vdev, struct vhost_iotlb *iotlb);
+	int (*dma_map)(struct vdpa_device *vdev, u64 iova, u64 size,
+		       u64 pa, u32 perm);
+	int (*dma_unmap)(struct vdpa_device *vdev, u64 iova, u64 size);
+
+	/* Free device resources */
+	void (*free)(struct vdpa_device *vdev);
+};
+
+struct vdpa_device *__vdpa_alloc_device(struct device *parent,
+					const struct vdpa_config_ops *config,
+					size_t size);
+
+#define vdpa_alloc_device(dev_struct, member, parent, config)   \
+			  container_of(__vdpa_alloc_device( \
+				       parent, config, \
+				       sizeof(dev_struct) + \
+				       BUILD_BUG_ON_ZERO(offsetof( \
+				       dev_struct, member))), \
+				       dev_struct, member)
+
+int vdpa_register_device(struct vdpa_device *vdev);
+void vdpa_unregister_device(struct vdpa_device *vdev);
+
+/**
+ * vdpa_driver - operations for a vDPA driver
+ * @driver: underlying device driver
+ * @probe: the function to call when a device is found.  Returns 0 or -errno.
+ * @remove: the function to call when a device is removed.
+ */
+struct vdpa_driver {
+	struct device_driver driver;
+	int (*probe)(struct vdpa_device *vdev);
+	void (*remove)(struct vdpa_device *vdev);
+};
+
+#define vdpa_register_driver(drv) \
+	__vdpa_register_driver(drv, THIS_MODULE)
+int __vdpa_register_driver(struct vdpa_driver *drv, struct module *owner);
+void vdpa_unregister_driver(struct vdpa_driver *drv);
+
+#define module_vdpa_driver(__vdpa_driver) \
+	module_driver(__vdpa_driver, vdpa_register_driver,	\
+		      vdpa_unregister_driver)
+
+static inline struct vdpa_driver *drv_to_vdpa(struct device_driver *driver)
+{
+	return container_of(driver, struct vdpa_driver, driver);
+}
+
+static inline struct vdpa_device *dev_to_vdpa(struct device *_dev)
+{
+	return container_of(_dev, struct vdpa_device, dev);
+}
+
+static inline void *vdpa_get_drvdata(const struct vdpa_device *vdev)
+{
+	return dev_get_drvdata(&vdev->dev);
+}
+
+static inline void vdpa_set_drvdata(struct vdpa_device *vdev, void *data)
+{
+	dev_set_drvdata(&vdev->dev, data);
+}
+
+static inline struct device *vdpa_get_dma_dev(struct vdpa_device *vdev)
+{
+	return vdev->dma_dev;
+}
+#endif /* _LINUX_VDPA_H */
diff --git a/include/linux/vfio.h b/include/linux/vfio.h
index e42a711..5d92ee1 100644
--- a/include/linux/vfio.h
+++ b/include/linux/vfio.h
@@ -26,6 +26,9 @@
  *         operations documented below
  * @mmap: Perform mmap(2) on a region of the device file descriptor
  * @request: Request for the bus driver to release the device
+ * @match: Optional device name match callback (return: 0 for no-match, >0 for
+ *         match, -errno for abort (ex. match with insufficient or incorrect
+ *         additional args)
  */
 struct vfio_device_ops {
 	char	*name;
@@ -39,6 +42,7 @@ struct vfio_device_ops {
 			 unsigned long arg);
 	int	(*mmap)(void *device_data, struct vm_area_struct *vma);
 	void	(*request)(void *device_data, unsigned int count);
+	int	(*match)(void *device_data, char *buf);
 };
 
 extern struct iommu_group *vfio_iommu_group_get(struct device *dev);
@@ -82,6 +86,8 @@ struct vfio_iommu_driver_ops {
 					     struct notifier_block *nb);
 	int		(*unregister_notifier)(void *iommu_data,
 					       struct notifier_block *nb);
+	int		(*dma_rw)(void *iommu_data, dma_addr_t user_iova,
+				  void *data, size_t count, bool write);
 };
 
 extern int vfio_register_iommu_driver(const struct vfio_iommu_driver_ops *ops);
@@ -94,6 +100,8 @@ extern void vfio_unregister_iommu_driver(
  */
 extern struct vfio_group *vfio_group_get_external_user(struct file *filep);
 extern void vfio_group_put_external_user(struct vfio_group *group);
+extern struct vfio_group *vfio_group_get_external_user_from_dev(struct device
+								*dev);
 extern bool vfio_external_group_match_file(struct vfio_group *group,
 					   struct file *filep);
 extern int vfio_external_user_iommu_id(struct vfio_group *group);
@@ -107,6 +115,15 @@ extern int vfio_pin_pages(struct device *dev, unsigned long *user_pfn,
 extern int vfio_unpin_pages(struct device *dev, unsigned long *user_pfn,
 			    int npage);
 
+extern int vfio_group_pin_pages(struct vfio_group *group,
+				unsigned long *user_iova_pfn, int npage,
+				int prot, unsigned long *phys_pfn);
+extern int vfio_group_unpin_pages(struct vfio_group *group,
+				  unsigned long *user_iova_pfn, int npage);
+
+extern int vfio_dma_rw(struct vfio_group *group, dma_addr_t user_iova,
+		       void *data, size_t len, bool write);
+
 /* each type has independent events */
 enum vfio_notify_type {
 	VFIO_IOMMU_NOTIFY = 0,
diff --git a/include/linux/vhost_iotlb.h b/include/linux/vhost_iotlb.h
new file mode 100644
index 0000000..6b09b78
--- /dev/null
+++ b/include/linux/vhost_iotlb.h
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _LINUX_VHOST_IOTLB_H
+#define _LINUX_VHOST_IOTLB_H
+
+#include <linux/interval_tree_generic.h>
+
+struct vhost_iotlb_map {
+	struct rb_node rb;
+	struct list_head link;
+	u64 start;
+	u64 last;
+	u64 size;
+	u64 addr;
+#define VHOST_MAP_RO 0x1
+#define VHOST_MAP_WO 0x2
+#define VHOST_MAP_RW 0x3
+	u32 perm;
+	u32 flags_padding;
+	u64 __subtree_last;
+};
+
+#define VHOST_IOTLB_FLAG_RETIRE 0x1
+
+struct vhost_iotlb {
+	struct rb_root_cached root;
+	struct list_head list;
+	unsigned int limit;
+	unsigned int nmaps;
+	unsigned int flags;
+};
+
+int vhost_iotlb_add_range(struct vhost_iotlb *iotlb, u64 start, u64 last,
+			  u64 addr, unsigned int perm);
+void vhost_iotlb_del_range(struct vhost_iotlb *iotlb, u64 start, u64 last);
+
+struct vhost_iotlb *vhost_iotlb_alloc(unsigned int limit, unsigned int flags);
+void vhost_iotlb_free(struct vhost_iotlb *iotlb);
+void vhost_iotlb_reset(struct vhost_iotlb *iotlb);
+
+struct vhost_iotlb_map *
+vhost_iotlb_itree_first(struct vhost_iotlb *iotlb, u64 start, u64 last);
+struct vhost_iotlb_map *
+vhost_iotlb_itree_next(struct vhost_iotlb_map *map, u64 start, u64 last);
+
+void vhost_iotlb_map_free(struct vhost_iotlb *iotlb,
+			  struct vhost_iotlb_map *map);
+#endif
diff --git a/include/linux/vm_event_item.h b/include/linux/vm_event_item.h
index 47a3441..ffef0f2 100644
--- a/include/linux/vm_event_item.h
+++ b/include/linux/vm_event_item.h
@@ -73,9 +73,12 @@ enum vm_event_item { PGPGIN, PGPGOUT, PSWPIN, PSWPOUT,
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
 		THP_FAULT_ALLOC,
 		THP_FAULT_FALLBACK,
+		THP_FAULT_FALLBACK_CHARGE,
 		THP_COLLAPSE_ALLOC,
 		THP_COLLAPSE_ALLOC_FAILED,
 		THP_FILE_ALLOC,
+		THP_FILE_FALLBACK,
+		THP_FILE_FALLBACK_CHARGE,
 		THP_FILE_MAPPED,
 		THP_SPLIT_PAGE,
 		THP_SPLIT_PAGE_FAILED,
@@ -115,6 +118,8 @@ enum vm_event_item { PGPGIN, PGPGOUT, PSWPIN, PSWPOUT,
 
 #ifndef CONFIG_TRANSPARENT_HUGEPAGE
 #define THP_FILE_ALLOC ({ BUILD_BUG(); 0; })
+#define THP_FILE_FALLBACK ({ BUILD_BUG(); 0; })
+#define THP_FILE_FALLBACK_CHARGE ({ BUILD_BUG(); 0; })
 #define THP_FILE_MAPPED ({ BUILD_BUG(); 0; })
 #endif
 
diff --git a/include/linux/vringh.h b/include/linux/vringh.h
index d237087..bd0503c 100644
--- a/include/linux/vringh.h
+++ b/include/linux/vringh.h
@@ -14,6 +14,8 @@
 #include <linux/virtio_byteorder.h>
 #include <linux/uio.h>
 #include <linux/slab.h>
+#include <linux/dma-direction.h>
+#include <linux/vhost_iotlb.h>
 #include <asm/barrier.h>
 
 /* virtio_ring with information needed for host access. */
@@ -39,6 +41,9 @@ struct vringh {
 	/* The vring (note: it may contain user pointers!) */
 	struct vring vring;
 
+	/* IOTLB for this vring */
+	struct vhost_iotlb *iotlb;
+
 	/* The function to call to notify the guest about added buffers */
 	void (*notify)(struct vringh *);
 };
@@ -248,4 +253,35 @@ static inline __virtio64 cpu_to_vringh64(const struct vringh *vrh, u64 val)
 {
 	return __cpu_to_virtio64(vringh_is_little_endian(vrh), val);
 }
+
+void vringh_set_iotlb(struct vringh *vrh, struct vhost_iotlb *iotlb);
+
+int vringh_init_iotlb(struct vringh *vrh, u64 features,
+		      unsigned int num, bool weak_barriers,
+		      struct vring_desc *desc,
+		      struct vring_avail *avail,
+		      struct vring_used *used);
+
+int vringh_getdesc_iotlb(struct vringh *vrh,
+			 struct vringh_kiov *riov,
+			 struct vringh_kiov *wiov,
+			 u16 *head,
+			 gfp_t gfp);
+
+ssize_t vringh_iov_pull_iotlb(struct vringh *vrh,
+			      struct vringh_kiov *riov,
+			      void *dst, size_t len);
+ssize_t vringh_iov_push_iotlb(struct vringh *vrh,
+			      struct vringh_kiov *wiov,
+			      const void *src, size_t len);
+
+void vringh_abandon_iotlb(struct vringh *vrh, unsigned int num);
+
+int vringh_complete_iotlb(struct vringh *vrh, u16 head, u32 len);
+
+bool vringh_notify_enable_iotlb(struct vringh *vrh);
+void vringh_notify_disable_iotlb(struct vringh *vrh);
+
+int vringh_need_notify_iotlb(struct vringh *vrh);
+
 #endif /* _LINUX_VRINGH_H */
diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h
index e48554e..8b505d2 100644
--- a/include/linux/workqueue.h
+++ b/include/linux/workqueue.h
@@ -665,7 +665,7 @@ int workqueue_online_cpu(unsigned int cpu);
 int workqueue_offline_cpu(unsigned int cpu);
 #endif
 
-int __init workqueue_init_early(void);
-int __init workqueue_init(void);
+void __init workqueue_init_early(void);
+void __init workqueue_init(void);
 
 #endif
diff --git a/include/linux/xattr.h b/include/linux/xattr.h
index 6dad031..47eaa34 100644
--- a/include/linux/xattr.h
+++ b/include/linux/xattr.h
@@ -73,7 +73,7 @@ struct simple_xattr {
 	struct list_head list;
 	char *name;
 	size_t size;
-	char value[0];
+	char value[];
 };
 
 /*
@@ -102,7 +102,8 @@ struct simple_xattr *simple_xattr_alloc(const void *value, size_t size);
 int simple_xattr_get(struct simple_xattrs *xattrs, const char *name,
 		     void *buffer, size_t size);
 int simple_xattr_set(struct simple_xattrs *xattrs, const char *name,
-		     const void *value, size_t size, int flags);
+		     const void *value, size_t size, int flags,
+		     ssize_t *removed_size);
 ssize_t simple_xattr_list(struct inode *inode, struct simple_xattrs *xattrs, char *buffer,
 			  size_t size);
 void simple_xattr_list_add(struct simple_xattrs *xattrs,
diff --git a/include/net/9p/client.h b/include/net/9p/client.h
index acc60d8..dd5b5bd 100644
--- a/include/net/9p/client.h
+++ b/include/net/9p/client.h
@@ -73,7 +73,6 @@ enum p9_req_status_t {
  * @wq: wait_queue for the client to block on for this request
  * @tc: the request fcall structure
  * @rc: the response fcall structure
- * @aux: transport specific data (provided for trans_fd migration)
  * @req_list: link for higher level objects to chain requests
  */
 struct p9_req_t {
@@ -83,7 +82,6 @@ struct p9_req_t {
 	wait_queue_head_t wq;
 	struct p9_fcall tc;
 	struct p9_fcall rc;
-	void *aux;
 	struct list_head req_list;
 };
 
@@ -200,6 +198,8 @@ int p9_client_fsync(struct p9_fid *fid, int datasync);
 int p9_client_remove(struct p9_fid *fid);
 int p9_client_unlinkat(struct p9_fid *dfid, const char *name, int flags);
 int p9_client_read(struct p9_fid *fid, u64 offset, struct iov_iter *to, int *err);
+int p9_client_read_once(struct p9_fid *fid, u64 offset, struct iov_iter *to,
+		int *err);
 int p9_client_write(struct p9_fid *fid, u64 offset, struct iov_iter *from, int *err);
 int p9_client_readdir(struct p9_fid *fid, char *data, u32 count, u64 offset);
 int p9dirent_read(struct p9_client *clnt, char *buf, int len,
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index c78bd4f..70e48f6 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -905,6 +905,8 @@ struct survey_info {
  *	protocol frames.
  * @control_port_over_nl80211: TRUE if userspace expects to exchange control
  *	port frames over NL80211 instead of the network interface.
+ * @control_port_no_preauth: disables pre-auth rx over the nl80211 control
+ *	port for mac80211
  * @wep_keys: static WEP keys, if not NULL points to an array of
  *	CFG80211_MAX_WEP_KEYS WEP keys
  * @wep_tx_key: key index (0..3) of the default TX static WEP key
@@ -1222,6 +1224,7 @@ struct sta_txpwr {
  * @he_capa: HE capabilities of station
  * @he_capa_len: the length of the HE capabilities
  * @airtime_weight: airtime scheduler weight for this station
+ * @txpwr: transmit power for an associated station
  */
 struct station_parameters {
 	const u8 *supported_rates;
@@ -4666,6 +4669,9 @@ struct wiphy_iftype_akm_suites {
  * @txq_memory_limit: configuration internal TX queue memory limit
  * @txq_quantum: configuration of internal TX queue scheduler quantum
  *
+ * @tx_queue_len: allow setting transmit queue len for drivers not using
+ *	wake_tx_queue
+ *
  * @support_mbssid: can HW support association with nontransmitted AP
  * @support_only_he_mbssid: don't parse MBSSID elements if it is not
  *	HE AP, in order to avoid compatibility issues.
@@ -4681,6 +4687,10 @@ struct wiphy_iftype_akm_suites {
  *	supported by the driver for each peer
  * @tid_config_support.max_retry: maximum supported retry count for
  *	long/short retry configuration
+ *
+ * @max_data_retry_count: maximum supported per TID retry count for
+ *	configuration through the %NL80211_TID_CONFIG_ATTR_RETRY_SHORT and
+ *	%NL80211_TID_CONFIG_ATTR_RETRY_LONG attributes
  */
 struct wiphy {
 	/* assign these fields before you register the wiphy */
diff --git a/include/net/ip6_route.h b/include/net/ip6_route.h
index f7543c0..9947eb1 100644
--- a/include/net/ip6_route.h
+++ b/include/net/ip6_route.h
@@ -254,6 +254,7 @@ static inline bool ipv6_anycast_destination(const struct dst_entry *dst,
 
 	return rt->rt6i_flags & RTF_ANYCAST ||
 		(rt->rt6i_dst.plen < 127 &&
+		 !(rt->rt6i_flags & (RTF_GATEWAY | RTF_NONEXTHOP)) &&
 		 ipv6_addr_equal(&rt->rt6i_dst.addr, daddr));
 }
 
diff --git a/include/net/netfilter/nf_tables.h b/include/net/netfilter/nf_tables.h
index 6eb627b..4ff7c81 100644
--- a/include/net/netfilter/nf_tables.h
+++ b/include/net/netfilter/nf_tables.h
@@ -901,7 +901,7 @@ static inline void nft_set_elem_update_expr(const struct nft_set_ext *ext,
 {
 	struct nft_expr *expr;
 
-	if (nft_set_ext_exists(ext, NFT_SET_EXT_EXPR)) {
+	if (__nft_set_ext_exists(ext, NFT_SET_EXT_EXPR)) {
 		expr = nft_set_ext_expr(ext);
 		expr->ops->eval(expr, regs, pkt);
 	}
diff --git a/include/net/sock.h b/include/net/sock.h
index 6d84784..3e8c6d4 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -2553,9 +2553,9 @@ sk_is_refcounted(struct sock *sk)
 }
 
 /**
- * skb_steal_sock
- * @skb to steal the socket from
- * @refcounted is set to true if the socket is reference-counted
+ * skb_steal_sock - steal a socket from an sk_buff
+ * @skb: sk_buff to steal the socket from
+ * @refcounted: is set to true if the socket is reference-counted
  */
 static inline struct sock *
 skb_steal_sock(struct sk_buff *skb, bool *refcounted)
diff --git a/include/scsi/iscsi_if.h b/include/scsi/iscsi_if.h
index 92b11c7..5225a23 100644
--- a/include/scsi/iscsi_if.h
+++ b/include/scsi/iscsi_if.h
@@ -60,6 +60,7 @@ enum iscsi_uevent_e {
 	ISCSI_UEVENT_LOGOUT_FLASHNODE_SID	= UEVENT_BASE + 30,
 	ISCSI_UEVENT_SET_CHAP		= UEVENT_BASE + 31,
 	ISCSI_UEVENT_GET_HOST_STATS	= UEVENT_BASE + 32,
+	ISCSI_UEVENT_DESTROY_SESSION_ASYNC	= UEVENT_BASE + 33,
 
 	/* up events */
 	ISCSI_KEVENT_RECV_PDU		= KEVENT_BASE + 1,
@@ -311,7 +312,7 @@ enum iscsi_param_type {
 struct iscsi_param_info {
 	uint32_t len;		/* Actual length of the param value */
 	uint16_t param;		/* iscsi param */
-	uint8_t value[0];	/* length sized value follows */
+	uint8_t value[];	/* length sized value follows */
 } __packed;
 
 struct iscsi_iface_param_info {
@@ -320,7 +321,7 @@ struct iscsi_iface_param_info {
 	uint16_t param;		/* iscsi param value */
 	uint8_t iface_type;	/* IPv4 or IPv6 */
 	uint8_t param_type;	/* iscsi_param_type */
-	uint8_t value[0];	/* length sized value follows */
+	uint8_t value[];	/* length sized value follows */
 } __packed;
 
 /*
@@ -697,7 +698,7 @@ enum iscsi_flashnode_param {
 struct iscsi_flashnode_param_info {
 	uint32_t len;		/* Actual length of the param */
 	uint16_t param;		/* iscsi param value */
-	uint8_t value[0];	/* length sized value follows */
+	uint8_t value[];	/* length sized value follows */
 } __packed;
 
 enum iscsi_discovery_parent_type {
@@ -815,7 +816,7 @@ struct iscsi_stats {
 	 * up to ISCSI_STATS_CUSTOM_MAX
 	 */
 	uint32_t custom_length;
-	struct iscsi_stats_custom custom[0]
+	struct iscsi_stats_custom custom[]
 		__attribute__ ((aligned (sizeof(uint64_t))));
 };
 
@@ -946,7 +947,7 @@ struct iscsi_offload_host_stats {
 	 * up to ISCSI_HOST_STATS_CUSTOM_MAX
 	 */
 	uint32_t custom_length;
-	struct iscsi_host_stats_custom custom[0]
+	struct iscsi_host_stats_custom custom[]
 		__aligned(sizeof(uint64_t));
 };
 
diff --git a/include/scsi/scsi_bsg_iscsi.h b/include/scsi/scsi_bsg_iscsi.h
index fa0c820..6b81280 100644
--- a/include/scsi/scsi_bsg_iscsi.h
+++ b/include/scsi/scsi_bsg_iscsi.h
@@ -52,7 +52,7 @@ struct iscsi_bsg_host_vendor {
 	uint64_t vendor_id;
 
 	/* start of vendor command area */
-	uint32_t vendor_cmd[0];
+	uint32_t vendor_cmd[];
 };
 
 /* Response:
diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h
index a2849bb..80ac89e 100644
--- a/include/scsi/scsi_cmnd.h
+++ b/include/scsi/scsi_cmnd.h
@@ -159,7 +159,6 @@ static inline struct scsi_driver *scsi_cmd_to_driver(struct scsi_cmnd *cmd)
 	return *(struct scsi_driver **)cmd->request->rq_disk->private_data;
 }
 
-extern void scsi_put_command(struct scsi_cmnd *);
 extern void scsi_finish_command(struct scsi_cmnd *cmd);
 
 extern void *scsi_kmap_atomic_sg(struct scatterlist *sg, int sg_count,
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index f8312a3..c3cba2a 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -110,7 +110,6 @@ struct scsi_device {
 	atomic_t device_blocked;	/* Device returned QUEUE_FULL. */
 
 	spinlock_t list_lock;
-	struct list_head cmd_list;	/* queue of in use SCSI Command structures */
 	struct list_head starved_entry;
 	unsigned short queue_depth;	/* How deep of a queue we want */
 	unsigned short max_queue_depth;	/* max queue depth */
@@ -204,6 +203,9 @@ struct scsi_device {
 	unsigned unmap_limit_for_ws:1;	/* Use the UNMAP limit for WRITE SAME */
 	unsigned rpm_autosuspend:1;	/* Enable runtime autosuspend at device
 					 * creation time */
+
+	bool offline_already;		/* Device offline message logged */
+
 	atomic_t disk_events_disable_depth; /* disable depth for disk events */
 
 	DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */
@@ -231,7 +233,7 @@ struct scsi_device {
 	struct mutex		state_mutex;
 	enum scsi_device_state sdev_state;
 	struct task_struct	*quiesced_by;
-	unsigned long		sdev_data[0];
+	unsigned long		sdev_data[];
 } __attribute__((aligned(sizeof(unsigned long))));
 
 #define	to_scsi_device(d)	\
@@ -315,7 +317,7 @@ struct scsi_target {
 	char			scsi_level;
 	enum scsi_target_state	state;
 	void 			*hostdata; /* available to low-level driver */
-	unsigned long		starget_data[0]; /* for the transport */
+	unsigned long		starget_data[]; /* for the transport */
 	/* starget_data must be the last element!!!! */
 } __attribute__((aligned(sizeof(unsigned long))));
 
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index f577647..822e8cd 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -62,6 +62,9 @@ struct scsi_host_template {
 			    void __user *arg);
 #endif
 
+	int (*init_cmd_priv)(struct Scsi_Host *shost, struct scsi_cmnd *cmd);
+	int (*exit_cmd_priv)(struct Scsi_Host *shost, struct scsi_cmnd *cmd);
+
 	/*
 	 * The queuecommand function is used to queue up a scsi
 	 * command block to the LLDD.  When the driver finished
@@ -426,9 +429,6 @@ struct scsi_host_template {
 	/* True if the controller does not support WRITE SAME */
 	unsigned no_write_same:1;
 
-	/* True if the low-level driver supports blk-mq only */
-	unsigned force_blk_mq:1;
-
 	/*
 	 * Countdown for host blocking with no commands outstanding.
 	 */
@@ -627,8 +627,6 @@ struct Scsi_Host {
 	/* The controller does not support WRITE SAME */
 	unsigned no_write_same:1;
 
-	unsigned use_cmd_list:1;
-
 	/* Host responded with short (<36 bytes) INQUIRY result */
 	unsigned short_inquiry:1;
 
@@ -685,7 +683,7 @@ struct Scsi_Host {
 	 * and also because some compilers (m68k) don't automatically force
 	 * alignment to a long boundary.
 	 */
-	unsigned long hostdata[0]  /* Used for storage of host specific stuff */
+	unsigned long hostdata[]  /* Used for storage of host specific stuff */
 		__attribute__ ((aligned (sizeof(unsigned long))));
 };
 
@@ -735,6 +733,8 @@ extern int scsi_host_busy(struct Scsi_Host *shost);
 extern void scsi_host_put(struct Scsi_Host *t);
 extern struct Scsi_Host *scsi_host_lookup(unsigned short);
 extern const char *scsi_host_state_name(enum scsi_host_state);
+extern void scsi_host_complete_all_commands(struct Scsi_Host *shost,
+					    int status);
 
 static inline int __must_check scsi_add_host(struct Scsi_Host *host,
 					     struct device *dev)
@@ -759,6 +759,11 @@ static inline int scsi_host_scan_allowed(struct Scsi_Host *shost)
 
 extern void scsi_unblock_requests(struct Scsi_Host *);
 extern void scsi_block_requests(struct Scsi_Host *);
+extern int scsi_host_block(struct Scsi_Host *shost);
+extern int scsi_host_unblock(struct Scsi_Host *shost, int new_state);
+
+void scsi_host_busy_iter(struct Scsi_Host *,
+			 bool (*fn)(struct scsi_cmnd *, void *, bool), void *priv);
 
 struct class_container;
 
diff --git a/include/scsi/scsi_ioctl.h b/include/scsi/scsi_ioctl.h
index 4fe69d8..b465799 100644
--- a/include/scsi/scsi_ioctl.h
+++ b/include/scsi/scsi_ioctl.h
@@ -27,7 +27,7 @@ struct scsi_device;
 typedef struct scsi_ioctl_command {
 	unsigned int inlen;
 	unsigned int outlen;
-	unsigned char data[0];
+	unsigned char data[];
 } Scsi_Ioctl_Command;
 
 typedef struct scsi_idlun {
diff --git a/include/scsi/scsi_transport_iscsi.h b/include/scsi/scsi_transport_iscsi.h
index 325ae73..bdcb6d6 100644
--- a/include/scsi/scsi_transport_iscsi.h
+++ b/include/scsi/scsi_transport_iscsi.h
@@ -188,8 +188,16 @@ extern void iscsi_ping_comp_event(uint32_t host_no,
 				  uint32_t status, uint32_t pid,
 				  uint32_t data_size, uint8_t *data);
 
+/* iscsi class connection state */
+enum iscsi_connection_state {
+	ISCSI_CONN_UP = 0,
+	ISCSI_CONN_DOWN,
+	ISCSI_CONN_FAILED,
+};
+
 struct iscsi_cls_conn {
 	struct list_head conn_list;	/* item in connlist */
+	struct list_head conn_list_err;	/* item in connlist_err */
 	void *dd_data;			/* LLD private data */
 	struct iscsi_transport *transport;
 	uint32_t cid;			/* connection id */
@@ -197,6 +205,7 @@ struct iscsi_cls_conn {
 	struct iscsi_endpoint *ep;
 
 	struct device dev;		/* sysfs transport/container device */
+	enum iscsi_connection_state state;
 };
 
 #define iscsi_dev_to_conn(_dev) \
@@ -225,6 +234,7 @@ struct iscsi_cls_session {
 	struct work_struct unblock_work;
 	struct work_struct scan_work;
 	struct work_struct unbind_work;
+	struct work_struct destroy_work;
 
 	/* recovery fields */
 	int recovery_tmo;
diff --git a/include/scsi/sg.h b/include/scsi/sg.h
index 29c7ad0..7327e12 100644
--- a/include/scsi/sg.h
+++ b/include/scsi/sg.h
@@ -24,7 +24,7 @@
  *	http://sg.danny.cz/sg  [alternatively check the MAINTAINERS file]
  * The documentation for the sg version 3 driver can be found at:
  *	http://sg.danny.cz/sg/p/sg_v3_ho.html
- * Also see: <kernel_source>/Documentation/scsi/scsi-generic.txt
+ * Also see: <kernel_source>/Documentation/scsi/scsi-generic.rst
  *
  * For utility and test programs see: http://sg.danny.cz/sg/sg3_utils.html
  */
diff --git a/include/scsi/srp.h b/include/scsi/srp.h
index 9220758..177d802 100644
--- a/include/scsi/srp.h
+++ b/include/scsi/srp.h
@@ -109,7 +109,7 @@ struct srp_direct_buf {
 struct srp_indirect_buf {
 	struct srp_direct_buf	table_desc;
 	__be32			len;
-	struct srp_direct_buf	desc_list[0];
+	struct srp_direct_buf	desc_list[];
 } __attribute__((packed));
 
 /* Immediate data buffer descriptor as defined in SRP2. */
@@ -244,7 +244,7 @@ struct srp_cmd {
 	u8	reserved4;
 	u8	add_cdb_len;
 	u8	cdb[16];
-	u8	add_data[0];
+	u8	add_data[];
 };
 
 enum {
@@ -274,7 +274,7 @@ struct srp_rsp {
 	__be32	data_in_res_cnt;
 	__be32	sense_data_len;
 	__be32	resp_data_len;
-	u8	data[0];
+	u8	data[];
 } __attribute__((packed));
 
 struct srp_cred_req {
@@ -306,7 +306,7 @@ struct srp_aer_req {
 	struct scsi_lun	lun;
 	__be32	sense_data_len;
 	u32	reserved3;
-	u8	sense_data[0];
+	u8	sense_data[];
 } __attribute__((packed));
 
 struct srp_aer_rsp {
diff --git a/include/soc/fsl/dpaa2-io.h b/include/soc/fsl/dpaa2-io.h
index 672cfb5..c9d8499 100644
--- a/include/soc/fsl/dpaa2-io.h
+++ b/include/soc/fsl/dpaa2-io.h
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
 /*
  * Copyright 2014-2016 Freescale Semiconductor Inc.
- * Copyright NXP
+ * Copyright 2017-2019 NXP
  *
  */
 #ifndef __FSL_DPAA2_IO_H
@@ -109,6 +109,10 @@ int dpaa2_io_service_pull_channel(struct dpaa2_io *d, u32 channelid,
 
 int dpaa2_io_service_enqueue_fq(struct dpaa2_io *d, u32 fqid,
 				const struct dpaa2_fd *fd);
+int dpaa2_io_service_enqueue_multiple_fq(struct dpaa2_io *d, u32 fqid,
+				const struct dpaa2_fd *fd, int number_of_frame);
+int dpaa2_io_service_enqueue_multiple_desc_fq(struct dpaa2_io *d, u32 *fqid,
+				const struct dpaa2_fd *fd, int number_of_frame);
 int dpaa2_io_service_enqueue_qd(struct dpaa2_io *d, u32 qdid, u8 prio,
 				u16 qdbin, const struct dpaa2_fd *fd);
 int dpaa2_io_service_release(struct dpaa2_io *d, u16 bpid,
diff --git a/include/soc/fsl/qe/ucc_fast.h b/include/soc/fsl/qe/ucc_fast.h
index ba0e838..dc4e794 100644
--- a/include/soc/fsl/qe/ucc_fast.h
+++ b/include/soc/fsl/qe/ucc_fast.h
@@ -178,10 +178,10 @@ struct ucc_fast_info {
 struct ucc_fast_private {
 	struct ucc_fast_info *uf_info;
 	struct ucc_fast __iomem *uf_regs; /* a pointer to the UCC regs. */
-	u32 __iomem *p_ucce;	/* a pointer to the event register in memory. */
-	u32 __iomem *p_uccm;	/* a pointer to the mask register in memory. */
+	__be32 __iomem *p_ucce;	/* a pointer to the event register in memory. */
+	__be32 __iomem *p_uccm;	/* a pointer to the mask register in memory. */
 #ifdef CONFIG_UGETH_TX_ON_DEMAND
-	u16 __iomem *p_utodr;	/* pointer to the transmit on demand register */
+	__be16 __iomem *p_utodr;/* pointer to the transmit on demand register */
 #endif
 	int enabled_tx;		/* Whether channel is enabled for Tx (ENT) */
 	int enabled_rx;		/* Whether channel is enabled for Rx (ENR) */
diff --git a/include/soc/fsl/qe/ucc_slow.h b/include/soc/fsl/qe/ucc_slow.h
index d187a6b..11a216e 100644
--- a/include/soc/fsl/qe/ucc_slow.h
+++ b/include/soc/fsl/qe/ucc_slow.h
@@ -184,7 +184,7 @@ struct ucc_slow_info {
 struct ucc_slow_private {
 	struct ucc_slow_info *us_info;
 	struct ucc_slow __iomem *us_regs; /* Ptr to memory map of UCC regs */
-	struct ucc_slow_pram *us_pram;	/* a pointer to the parameter RAM */
+	struct ucc_slow_pram __iomem *us_pram;	/* a pointer to the parameter RAM */
 	s32 us_pram_offset;
 	int enabled_tx;		/* Whether channel is enabled for Tx (ENT) */
 	int enabled_rx;		/* Whether channel is enabled for Rx (ENR) */
@@ -196,13 +196,12 @@ struct ucc_slow_private {
 				   and length for first BD in a frame */
 	s32 tx_base_offset;	/* first BD in Tx BD table offset (In MURAM) */
 	s32 rx_base_offset;	/* first BD in Rx BD table offset (In MURAM) */
-	struct qe_bd *confBd;	/* next BD for confirm after Tx */
-	struct qe_bd *tx_bd;	/* next BD for new Tx request */
-	struct qe_bd *rx_bd;	/* next BD to collect after Rx */
+	struct qe_bd __iomem *confBd;	/* next BD for confirm after Tx */
+	struct qe_bd __iomem *tx_bd;	/* next BD for new Tx request */
+	struct qe_bd __iomem *rx_bd;	/* next BD to collect after Rx */
 	void *p_rx_frame;	/* accumulating receive frame */
-	u16 *p_ucce;		/* a pointer to the event register in memory.
-				 */
-	u16 *p_uccm;		/* a pointer to the mask register in memory */
+	__be16 __iomem *p_ucce;	/* a pointer to the event register in memory */
+	__be16 __iomem *p_uccm;	/* a pointer to the mask register in memory */
 	u16 saved_uccm;		/* a saved mask for the RX Interrupt bits */
 #ifdef STATISTICS
 	u32 tx_frames;		/* Transmitted frames counters */
diff --git a/include/soc/mscc/ocelot.h b/include/soc/mscc/ocelot.h
index ebffcb3..6d6a394 100644
--- a/include/soc/mscc/ocelot.h
+++ b/include/soc/mscc/ocelot.h
@@ -476,6 +476,8 @@ struct ocelot_port {
 
 	void __iomem			*regs;
 
+	bool				vlan_aware;
+
 	/* Ingress default VLAN (pvid) */
 	u16				pvid;
 
@@ -610,7 +612,7 @@ int ocelot_port_bridge_leave(struct ocelot *ocelot, int port,
 int ocelot_fdb_dump(struct ocelot *ocelot, int port,
 		    dsa_fdb_dump_cb_t *cb, void *data);
 int ocelot_fdb_add(struct ocelot *ocelot, int port,
-		   const unsigned char *addr, u16 vid, bool vlan_aware);
+		   const unsigned char *addr, u16 vid);
 int ocelot_fdb_del(struct ocelot *ocelot, int port,
 		   const unsigned char *addr, u16 vid);
 int ocelot_vlan_add(struct ocelot *ocelot, int port, u16 vid, bool pvid,
diff --git a/include/soc/qcom/rpmh.h b/include/soc/qcom/rpmh.h
index 619e07c..f9ec353 100644
--- a/include/soc/qcom/rpmh.h
+++ b/include/soc/qcom/rpmh.h
@@ -20,8 +20,6 @@ int rpmh_write_async(const struct device *dev, enum rpmh_state state,
 int rpmh_write_batch(const struct device *dev, enum rpmh_state state,
 		     const struct tcs_cmd *cmd, u32 *n);
 
-int rpmh_flush(const struct device *dev);
-
 int rpmh_invalidate(const struct device *dev);
 
 #else
@@ -40,9 +38,6 @@ static inline int rpmh_write_batch(const struct device *dev,
 				   const struct tcs_cmd *cmd, u32 *n)
 { return -ENODEV; }
 
-static inline int rpmh_flush(const struct device *dev)
-{ return -ENODEV; }
-
 static inline int rpmh_invalidate(const struct device *dev)
 { return -ENODEV; }
 
diff --git a/include/soc/tegra/bpmp-abi.h b/include/soc/tegra/bpmp-abi.h
index cac6f61..8f8e73e 100644
--- a/include/soc/tegra/bpmp-abi.h
+++ b/include/soc/tegra/bpmp-abi.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 /*
- * Copyright (c) 2014-2018, NVIDIA CORPORATION.  All rights reserved.
+ * Copyright (c) 2014-2020, NVIDIA CORPORATION.  All rights reserved.
  */
 
 #ifndef _ABI_BPMP_ABI_H_
@@ -2119,6 +2119,7 @@ enum {
 	CMD_UPHY_PCIE_LANE_MARGIN_STATUS = 2,
 	CMD_UPHY_PCIE_EP_CONTROLLER_PLL_INIT = 3,
 	CMD_UPHY_PCIE_CONTROLLER_STATE = 4,
+	CMD_UPHY_PCIE_EP_CONTROLLER_PLL_OFF = 5,
 	CMD_UPHY_MAX,
 };
 
@@ -2151,6 +2152,11 @@ struct cmd_uphy_pcie_controller_state_request {
 	uint8_t enable;
 } __ABI_PACKED;
 
+struct cmd_uphy_ep_controller_pll_off_request {
+	/** @brief EP controller number, valid: 0, 4, 5 */
+	uint8_t ep_controller;
+} __ABI_PACKED;
+
 /**
  * @ingroup UPHY
  * @brief Request with #MRQ_UPHY
@@ -2165,6 +2171,7 @@ struct cmd_uphy_pcie_controller_state_request {
  * |CMD_UPHY_PCIE_LANE_MARGIN_STATUS     |                                        |
  * |CMD_UPHY_PCIE_EP_CONTROLLER_PLL_INIT |cmd_uphy_ep_controller_pll_init_request |
  * |CMD_UPHY_PCIE_CONTROLLER_STATE       |cmd_uphy_pcie_controller_state_request  |
+ * |CMD_UPHY_PCIE_EP_CONTROLLER_PLL_OFF  |cmd_uphy_ep_controller_pll_off_request  |
  *
  */
 
@@ -2178,6 +2185,7 @@ struct mrq_uphy_request {
 		struct cmd_uphy_margin_control_request uphy_set_margin_control;
 		struct cmd_uphy_ep_controller_pll_init_request ep_ctrlr_pll_init;
 		struct cmd_uphy_pcie_controller_state_request controller_state;
+		struct cmd_uphy_ep_controller_pll_off_request ep_ctrlr_pll_off;
 	} __UNION_ANON;
 } __ABI_PACKED;
 
diff --git a/include/soc/tegra/cpuidle.h b/include/soc/tegra/cpuidle.h
index 029ba1f..5665975 100644
--- a/include/soc/tegra/cpuidle.h
+++ b/include/soc/tegra/cpuidle.h
@@ -6,7 +6,7 @@
 #ifndef __SOC_TEGRA_CPUIDLE_H__
 #define __SOC_TEGRA_CPUIDLE_H__
 
-#if defined(CONFIG_ARM) && defined(CONFIG_ARCH_TEGRA) && defined(CONFIG_CPU_IDLE)
+#ifdef CONFIG_ARM_TEGRA_CPUIDLE
 void tegra_cpuidle_pcie_irqs_in_use(void);
 #else
 static inline void tegra_cpuidle_pcie_irqs_in_use(void)
diff --git a/include/soc/tegra/irq.h b/include/soc/tegra/irq.h
new file mode 100644
index 0000000..8eb11a7
--- /dev/null
+++ b/include/soc/tegra/irq.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2012, NVIDIA Corporation. All rights reserved.
+ */
+
+#ifndef __SOC_TEGRA_IRQ_H
+#define __SOC_TEGRA_IRQ_H
+
+#if defined(CONFIG_ARM)
+bool tegra_pending_sgi(void);
+#endif
+
+#endif /* __SOC_TEGRA_IRQ_H */
diff --git a/include/soc/tegra/pm.h b/include/soc/tegra/pm.h
index 951fcd7..08477d7 100644
--- a/include/soc/tegra/pm.h
+++ b/include/soc/tegra/pm.h
@@ -6,6 +6,8 @@
 #ifndef __SOC_TEGRA_PM_H__
 #define __SOC_TEGRA_PM_H__
 
+#include <linux/errno.h>
+
 enum tegra_suspend_mode {
 	TEGRA_SUSPEND_NONE = 0,
 	TEGRA_SUSPEND_LP2, /* CPU voltage off */
@@ -20,6 +22,12 @@ tegra_pm_validate_suspend_mode(enum tegra_suspend_mode mode);
 
 /* low-level resume entry point */
 void tegra_resume(void);
+
+int tegra30_pm_secondary_cpu_suspend(unsigned long arg);
+void tegra_pm_clear_cpu_in_lp2(void);
+void tegra_pm_set_cpu_in_lp2(void);
+int tegra_pm_enter_lp2(void);
+int tegra_pm_park_secondary_cpu(unsigned long cpu);
 #else
 static inline enum tegra_suspend_mode
 tegra_pm_validate_suspend_mode(enum tegra_suspend_mode mode)
@@ -30,6 +38,29 @@ tegra_pm_validate_suspend_mode(enum tegra_suspend_mode mode)
 static inline void tegra_resume(void)
 {
 }
+
+static inline int tegra30_pm_secondary_cpu_suspend(unsigned long arg)
+{
+	return -ENOTSUPP;
+}
+
+static inline void tegra_pm_clear_cpu_in_lp2(void)
+{
+}
+
+static inline void tegra_pm_set_cpu_in_lp2(void)
+{
+}
+
+static inline int tegra_pm_enter_lp2(void)
+{
+	return -ENOTSUPP;
+}
+
+static inline int tegra_pm_park_secondary_cpu(unsigned long cpu)
+{
+	return -ENOTSUPP;
+}
 #endif /* CONFIG_PM_SLEEP */
 
 #endif /* __SOC_TEGRA_PM_H__ */
diff --git a/include/soc/tegra/pmc.h b/include/soc/tegra/pmc.h
index 57e58fa..0dd52b0 100644
--- a/include/soc/tegra/pmc.h
+++ b/include/soc/tegra/pmc.h
@@ -113,8 +113,9 @@ enum tegra_io_pad {
 	TEGRA_IO_PAD_PEX_CLK_BIAS,
 	TEGRA_IO_PAD_PEX_CLK1,
 	TEGRA_IO_PAD_PEX_CLK2,
-	TEGRA_IO_PAD_PEX_CLK2_BIAS,
 	TEGRA_IO_PAD_PEX_CLK3,
+	TEGRA_IO_PAD_PEX_CLK_2_BIAS,
+	TEGRA_IO_PAD_PEX_CLK_2,
 	TEGRA_IO_PAD_PEX_CNTRL,
 	TEGRA_IO_PAD_PEX_CTL2,
 	TEGRA_IO_PAD_PEX_L0_RST_N,
diff --git a/include/sound/compress_driver.h b/include/sound/compress_driver.h
index bc88d6f..6ce8eff 100644
--- a/include/sound/compress_driver.h
+++ b/include/sound/compress_driver.h
@@ -23,7 +23,6 @@ struct snd_compr_ops;
  * struct snd_compr_runtime: runtime stream description
  * @state: stream state
  * @ops: pointer to DSP callbacks
- * @dma_buffer_p: runtime dma buffer pointer
  * @buffer: pointer to kernel buffer, valid only when not in mmap mode or
  *	DSP doesn't implement copy
  * @buffer_size: size of the above buffer
@@ -34,11 +33,14 @@ struct snd_compr_ops;
  * @total_bytes_transferred: cumulative bytes transferred by offload DSP
  * @sleep: poll sleep
  * @private_data: driver private data pointer
+ * @dma_area: virtual buffer address
+ * @dma_addr: physical buffer address (not accessible from main CPU)
+ * @dma_bytes: size of DMA area
+ * @dma_buffer_p: runtime dma buffer pointer
  */
 struct snd_compr_runtime {
 	snd_pcm_state_t state;
 	struct snd_compr_ops *ops;
-	struct snd_dma_buffer *dma_buffer_p;
 	void *buffer;
 	u64 buffer_size;
 	u32 fragment_size;
@@ -47,6 +49,11 @@ struct snd_compr_runtime {
 	u64 total_bytes_transferred;
 	wait_queue_head_t sleep;
 	void *private_data;
+
+	unsigned char *dma_area;
+	dma_addr_t dma_addr;
+	size_t dma_bytes;
+	struct snd_dma_buffer *dma_buffer_p;
 };
 
 /**
@@ -60,6 +67,7 @@ struct snd_compr_runtime {
  * @metadata_set: metadata set flag, true when set
  * @next_track: has userspace signal next track transition, true when set
  * @private_data: pointer to DSP private data
+ * @dma_buffer: allocated buffer if any
  */
 struct snd_compr_stream {
 	const char *name;
@@ -71,6 +79,7 @@ struct snd_compr_stream {
 	bool metadata_set;
 	bool next_track;
 	void *private_data;
+	struct snd_dma_buffer dma_buffer;
 };
 
 /**
@@ -180,21 +189,34 @@ static inline void snd_compr_drain_notify(struct snd_compr_stream *stream)
 
 /**
  * snd_compr_set_runtime_buffer - Set the Compress runtime buffer
- * @substream: compress substream to set
+ * @stream: compress stream to set
  * @bufp: the buffer information, NULL to clear
  *
  * Copy the buffer information to runtime buffer when @bufp is non-NULL.
  * Otherwise it clears the current buffer information.
  */
-static inline void snd_compr_set_runtime_buffer(
-					struct snd_compr_stream *substream,
-					struct snd_dma_buffer *bufp)
+static inline void
+snd_compr_set_runtime_buffer(struct snd_compr_stream *stream,
+			     struct snd_dma_buffer *bufp)
 {
-	struct snd_compr_runtime *runtime = substream->runtime;
+	struct snd_compr_runtime *runtime = stream->runtime;
 
-	runtime->dma_buffer_p = bufp;
+	if (bufp) {
+		runtime->dma_buffer_p = bufp;
+		runtime->dma_area = bufp->area;
+		runtime->dma_addr = bufp->addr;
+		runtime->dma_bytes = bufp->bytes;
+	} else {
+		runtime->dma_buffer_p = NULL;
+		runtime->dma_area = NULL;
+		runtime->dma_addr = 0;
+		runtime->dma_bytes = 0;
+	}
 }
 
+int snd_compr_malloc_pages(struct snd_compr_stream *stream, size_t size);
+int snd_compr_free_pages(struct snd_compr_stream *stream);
+
 int snd_compr_stop_error(struct snd_compr_stream *stream,
 			 snd_pcm_state_t state);
 
diff --git a/include/sound/core.h b/include/sound/core.h
index ac8b692..381a010 100644
--- a/include/sound/core.h
+++ b/include/sound/core.h
@@ -266,6 +266,7 @@ void snd_device_disconnect(struct snd_card *card, void *device_data);
 void snd_device_disconnect_all(struct snd_card *card);
 void snd_device_free(struct snd_card *card, void *device_data);
 void snd_device_free_all(struct snd_card *card);
+int snd_device_get_state(struct snd_card *card, void *device_data);
 
 /* isadma.c */
 
diff --git a/include/sound/hda_codec.h b/include/sound/hda_codec.h
index 3ee8036f..225154a 100644
--- a/include/sound/hda_codec.h
+++ b/include/sound/hda_codec.h
@@ -494,6 +494,11 @@ void snd_hda_update_power_acct(struct hda_codec *codec);
 static inline void snd_hda_set_power_save(struct hda_bus *bus, int delay) {}
 #endif
 
+static inline bool hda_codec_need_resume(struct hda_codec *codec)
+{
+	return !codec->relaxed_resume && codec->jacktbl.used;
+}
+
 #ifdef CONFIG_SND_HDA_PATCH_LOADER
 /*
  * patch firmware
diff --git a/include/sound/hdaudio.h b/include/sound/hdaudio.h
index d4299e1..affedc2 100644
--- a/include/sound/hdaudio.h
+++ b/include/sound/hdaudio.h
@@ -513,6 +513,7 @@ struct hdac_stream {
 	struct snd_pcm_substream *substream;	/* assigned substream,
 						 * set in PCM open
 						 */
+	struct snd_compr_stream *cstream;
 	unsigned int format_val;	/* format value to be set in the
 					 * controller and the codec
 					 */
@@ -527,6 +528,7 @@ struct hdac_stream {
 	bool locked:1;
 	bool stripe:1;			/* apply stripe control */
 
+	u64 curr_pos;
 	/* timestamp */
 	unsigned long start_wallclk;	/* start + minimum wallclk */
 	unsigned long period_wallclk;	/* wallclk for period */
diff --git a/include/sound/pcm.h b/include/sound/pcm.h
index f657ff0..2ba5df2 100644
--- a/include/sound/pcm.h
+++ b/include/sound/pcm.h
@@ -644,6 +644,11 @@ void snd_pcm_stream_unlock_irqrestore(struct snd_pcm_substream *substream,
 #define snd_pcm_group_for_each_entry(s, substream) \
 	list_for_each_entry(s, &substream->group->substreams, link_list)
 
+#define for_each_pcm_streams(stream)			\
+	for (stream  = SNDRV_PCM_STREAM_PLAYBACK;	\
+	     stream <= SNDRV_PCM_STREAM_LAST;		\
+	     stream++)
+
 /**
  * snd_pcm_running - Check whether the substream is in a running state
  * @substream: substream to check
@@ -1122,7 +1127,14 @@ snd_pcm_kernel_readv(struct snd_pcm_substream *substream,
 	return __snd_pcm_lib_xfer(substream, bufs, false, frames, true);
 }
 
-int snd_pcm_limit_hw_rates(struct snd_pcm_runtime *runtime);
+int snd_pcm_hw_limit_rates(struct snd_pcm_hardware *hw);
+
+static inline int
+snd_pcm_limit_hw_rates(struct snd_pcm_runtime *runtime)
+{
+	return snd_pcm_hw_limit_rates(&runtime->hw);
+}
+
 unsigned int snd_pcm_rate_to_rate_bit(unsigned int rate);
 unsigned int snd_pcm_rate_bit_to_rate(unsigned int rate_bit);
 unsigned int snd_pcm_rate_mask_intersect(unsigned int rates_a,
@@ -1415,6 +1427,15 @@ static inline u64 pcm_format_to_bits(snd_pcm_format_t pcm_format)
 	return 1ULL << (__force int) pcm_format;
 }
 
+/**
+ * pcm_for_each_format - helper to iterate for each format type
+ * @f: the iterator variable in snd_pcm_format_t type
+ */
+#define pcm_for_each_format(f)						\
+	for ((f) = SNDRV_PCM_FORMAT_FIRST;				\
+	     (__force int)(f) <= (__force int)SNDRV_PCM_FORMAT_LAST;	\
+	     (f) = (__force snd_pcm_format_t)((__force int)(f) + 1))
+
 /* printk helpers */
 #define pcm_err(pcm, fmt, args...) \
 	dev_err((pcm)->card->dev, fmt, ##args)
diff --git a/include/sound/pcm_params.h b/include/sound/pcm_params.h
index 661450a..36f9473 100644
--- a/include/sound/pcm_params.h
+++ b/include/sound/pcm_params.h
@@ -133,6 +133,13 @@ static inline int snd_mask_test(const struct snd_mask *mask, unsigned int val)
 	return mask->bits[MASK_OFS(val)] & MASK_BIT(val);
 }
 
+/* Most of drivers need only this one */
+static inline int snd_mask_test_format(const struct snd_mask *mask,
+				       snd_pcm_format_t format)
+{
+	return snd_mask_test(mask, (__force unsigned int)format);
+}
+
 static inline int snd_mask_single(const struct snd_mask *mask)
 {
 	int i, c = 0;
diff --git a/include/sound/rt5682.h b/include/sound/rt5682.h
index bc2c317..e1f7905 100644
--- a/include/sound/rt5682.h
+++ b/include/sound/rt5682.h
@@ -24,6 +24,12 @@ enum rt5682_jd_src {
 	RT5682_JD1,
 };
 
+enum rt5682_dai_clks {
+	RT5682_DAI_WCLK_IDX,
+	RT5682_DAI_BCLK_IDX,
+	RT5682_DAI_NUM_CLKS,
+};
+
 struct rt5682_platform_data {
 
 	int ldo1_en; /* GPIO for LDO1_EN */
@@ -32,6 +38,10 @@ struct rt5682_platform_data {
 	enum rt5682_dmic1_clk_pin dmic1_clk_pin;
 	enum rt5682_jd_src jd_src;
 	unsigned int btndet_delay;
+	unsigned int dmic_clk_rate;
+	unsigned int dmic_delay;
+
+	const char *dai_clk_names[RT5682_DAI_NUM_CLKS];
 };
 
 #endif
diff --git a/include/sound/soc-acpi.h b/include/sound/soc-acpi.h
index a217a87..392e953 100644
--- a/include/sound/soc-acpi.h
+++ b/include/sound/soc-acpi.h
@@ -75,18 +75,45 @@ struct snd_soc_acpi_mach_params {
 };
 
 /**
- * snd_soc_acpi_link_adr: ACPI-based list of _ADR, with a variable
- * number of devices per link
- *
+ * snd_soc_acpi_endpoint - endpoint descriptor
+ * @num: endpoint number (mandatory, unique per device)
+ * @aggregated: 0 (independent) or 1 (logically grouped)
+ * @group_position: zero-based order (only when @aggregated is 1)
+ * @group_id: platform-unique group identifier (only when @aggregrated is 1)
+ */
+struct snd_soc_acpi_endpoint {
+	u8 num;
+	u8 aggregated;
+	u8 group_position;
+	u8 group_id;
+};
+
+/**
+ * snd_soc_acpi_adr_device - descriptor for _ADR-enumerated device
+ * @adr: 64 bit ACPI _ADR value
+ * @num_endpoints: number of endpoints for this device
+ * @endpoints: array of endpoints
+ */
+struct snd_soc_acpi_adr_device {
+	const u64 adr;
+	const u8 num_endpoints;
+	const struct snd_soc_acpi_endpoint *endpoints;
+};
+
+/**
+ * snd_soc_acpi_link_adr - ACPI-based list of _ADR enumerated devices
  * @mask: one bit set indicates the link this list applies to
- * @num_adr: ARRAY_SIZE of adr
- * @adr: array of _ADR (represented as u64).
+ * @num_adr: ARRAY_SIZE of devices
+ * @adr_d: array of devices
+ *
+ * The number of devices per link can be more than 1, e.g. in SoundWire
+ * multi-drop configurations.
  */
 
 struct snd_soc_acpi_link_adr {
 	const u32 mask;
 	const u32 num_adr;
-	const u64 *adr;
+	const struct snd_soc_acpi_adr_device *adr_d;
 };
 
 /**
diff --git a/include/sound/soc-dai.h b/include/sound/soc-dai.h
index eaaeb00..d4825b8 100644
--- a/include/sound/soc-dai.h
+++ b/include/sound/soc-dai.h
@@ -202,6 +202,8 @@ struct snd_soc_dai_ops {
 
 	int (*set_sdw_stream)(struct snd_soc_dai *dai,
 			void *stream, int direction);
+	void *(*get_sdw_stream)(struct snd_soc_dai *dai, int direction);
+
 	/*
 	 * DAI digital mute - optional.
 	 * Called by soc-core to minimise any pops.
@@ -322,9 +324,7 @@ struct snd_soc_dai {
 	struct snd_soc_dai_driver *driver;
 
 	/* DAI runtime info */
-	unsigned int capture_active;		/* stream usage count */
-	unsigned int playback_active;		/* stream usage count */
-	unsigned int probed:1;
+	unsigned int stream_active[SNDRV_PCM_STREAM_LAST + 1]; /* usage count */
 
 	unsigned int active;
 
@@ -348,8 +348,27 @@ struct snd_soc_dai {
 	unsigned int rx_mask;
 
 	struct list_head list;
+
+	/* bit field */
+	unsigned int probed:1;
+	unsigned int started[SNDRV_PCM_STREAM_LAST + 1];
 };
 
+static inline struct snd_soc_pcm_stream *
+snd_soc_dai_get_pcm_stream(const struct snd_soc_dai *dai, int stream)
+{
+	return (stream == SNDRV_PCM_STREAM_PLAYBACK) ?
+		&dai->driver->playback : &dai->driver->capture;
+}
+
+static inline
+struct snd_soc_dapm_widget *snd_soc_dai_get_widget(
+	struct snd_soc_dai *dai, int stream)
+{
+	return (stream == SNDRV_PCM_STREAM_PLAYBACK) ?
+		dai->playback_widget : dai->capture_widget;
+}
+
 static inline void *snd_soc_dai_get_dma_data(const struct snd_soc_dai *dai,
 					     const struct snd_pcm_substream *ss)
 {
@@ -406,4 +425,23 @@ static inline int snd_soc_dai_set_sdw_stream(struct snd_soc_dai *dai,
 		return -ENOTSUPP;
 }
 
+/**
+ * snd_soc_dai_get_sdw_stream() - Retrieves SDW stream from DAI
+ * @dai: DAI
+ * @direction: Stream direction(Playback/Capture)
+ *
+ * This routine only retrieves that was previously configured
+ * with snd_soc_dai_get_sdw_stream()
+ *
+ * Returns pointer to stream or -ENOTSUPP if callback is not supported;
+ */
+static inline void *snd_soc_dai_get_sdw_stream(struct snd_soc_dai *dai,
+					       int direction)
+{
+	if (dai->driver->ops->get_sdw_stream)
+		return dai->driver->ops->get_sdw_stream(dai, direction);
+	else
+		return ERR_PTR(-ENOTSUPP);
+}
+
 #endif
diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h
index 1b6afbc..08495f8 100644
--- a/include/sound/soc-dapm.h
+++ b/include/sound/soc-dapm.h
@@ -482,6 +482,7 @@ int snd_soc_dapm_dai_get_connected_widgets(struct snd_soc_dai *dai, int stream,
 	struct snd_soc_dapm_widget_list **list,
 	bool (*custom_stop_condition)(struct snd_soc_dapm_widget *,
 				      enum snd_soc_dapm_direction));
+void snd_soc_dapm_dai_free_widgets(struct snd_soc_dapm_widget_list **list);
 
 struct snd_soc_dapm_context *snd_soc_dapm_kcontrol_dapm(
 	struct snd_kcontrol *kcontrol);
@@ -691,6 +692,11 @@ struct snd_soc_dapm_widget_list {
 	struct snd_soc_dapm_widget *widgets[0];
 };
 
+#define for_each_dapm_widgets(list, i, widget)				\
+	for ((i) = 0;							\
+	     (i) < list->num_widgets && (widget = list->widgets[i]);	\
+	     (i)++)
+
 struct snd_soc_dapm_stats {
 	int power_checks;
 	int path_checks;
diff --git a/include/sound/soc-dpcm.h b/include/sound/soc-dpcm.h
index b654ebf..0f6c50b 100644
--- a/include/sound/soc-dpcm.h
+++ b/include/sound/soc-dpcm.h
@@ -132,17 +132,8 @@ int snd_soc_dpcm_be_can_update(struct snd_soc_pcm_runtime *fe,
 struct snd_pcm_substream *
 	snd_soc_dpcm_get_substream(struct snd_soc_pcm_runtime *be, int stream);
 
-/* get the BE runtime state */
-enum snd_soc_dpcm_state
-	snd_soc_dpcm_be_get_state(struct snd_soc_pcm_runtime *be, int stream);
-
-/* set the BE runtime state */
-void snd_soc_dpcm_be_set_state(struct snd_soc_pcm_runtime *be, int stream,
-	enum snd_soc_dpcm_state state);
-
-/* internal use only */
-int soc_dpcm_be_digital_mute(struct snd_soc_pcm_runtime *fe, int mute);
-int soc_dpcm_runtime_update(struct snd_soc_card *);
+/* update audio routing between PCMs and any DAI links */
+int snd_soc_dpcm_runtime_update(struct snd_soc_card *card);
 
 #ifdef CONFIG_DEBUG_FS
 void soc_dpcm_debugfs_add(struct snd_soc_pcm_runtime *rtd);
@@ -154,6 +145,7 @@ static inline void soc_dpcm_debugfs_add(struct snd_soc_pcm_runtime *rtd)
 
 int dpcm_path_get(struct snd_soc_pcm_runtime *fe,
 	int stream, struct snd_soc_dapm_widget_list **list_);
+void dpcm_path_put(struct snd_soc_dapm_widget_list **list);
 int dpcm_process_paths(struct snd_soc_pcm_runtime *fe,
 	int stream, struct snd_soc_dapm_widget_list **list, int new);
 int dpcm_be_dai_startup(struct snd_soc_pcm_runtime *fe, int stream);
@@ -167,10 +159,4 @@ int dpcm_be_dai_prepare(struct snd_soc_pcm_runtime *fe, int stream);
 int dpcm_dapm_stream_event(struct snd_soc_pcm_runtime *fe, int dir,
 	int event);
 
-static inline void dpcm_path_put(struct snd_soc_dapm_widget_list **list)
-{
-	kfree(*list);
-}
-
-
 #endif
diff --git a/include/sound/soc.h b/include/sound/soc.h
index 8a22666..13458e4 100644
--- a/include/sound/soc.h
+++ b/include/sound/soc.h
@@ -471,6 +471,9 @@ bool snd_soc_runtime_ignore_pmdown_time(struct snd_soc_pcm_runtime *rtd);
 void snd_soc_runtime_activate(struct snd_soc_pcm_runtime *rtd, int stream);
 void snd_soc_runtime_deactivate(struct snd_soc_pcm_runtime *rtd, int stream);
 
+int snd_soc_runtime_calc_hw(struct snd_soc_pcm_runtime *rtd,
+			    struct snd_pcm_hardware *hw, int stream);
+
 int snd_soc_runtime_set_dai_fmt(struct snd_soc_pcm_runtime *rtd,
 	unsigned int dai_fmt);
 
@@ -855,6 +858,11 @@ struct snd_soc_dai_link {
 	     ((platform) = &link->platforms[i]);			\
 	     (i)++)
 
+#define for_each_link_cpus(link, i, cpu)				\
+	for ((i) = 0;							\
+	     ((i) < link->num_cpus) && ((cpu) = &link->cpus[i]);	\
+	     (i)++)
+
 /*
  * Sample 1 : Single CPU/Codec/Platform
  *
@@ -1058,6 +1066,7 @@ struct snd_soc_card {
 	const struct snd_soc_dapm_route *of_dapm_routes;
 	int num_of_dapm_routes;
 	bool fully_routed;
+	bool disable_route_checks;
 
 	/* lists of probed devices belonging to this card */
 	struct list_head component_dev_list;
@@ -1109,6 +1118,14 @@ struct snd_soc_card {
 #define for_each_card_components(card, component)			\
 	list_for_each_entry(component, &(card)->component_dev_list, card_list)
 
+#define for_each_card_dapms(card, dapm)					\
+	list_for_each_entry(dapm, &card->dapm_list, list)
+
+#define for_each_card_widgets(card, w)\
+	list_for_each_entry(w, &card->widgets, list)
+#define for_each_card_widgets_safe(card, w, _w)	\
+	list_for_each_entry_safe(w, _w, &card->widgets, list)
+
 /* SoC machine DAI configuration, glues a codec and cpu DAI together */
 struct snd_soc_pcm_runtime {
 	struct device *dev;
@@ -1128,10 +1145,14 @@ struct snd_soc_pcm_runtime {
 	struct snd_compr *compr;
 	struct snd_soc_dai *codec_dai;
 	struct snd_soc_dai *cpu_dai;
+	struct snd_soc_dai **dais;
 
 	struct snd_soc_dai **codec_dais;
 	unsigned int num_codecs;
 
+	struct snd_soc_dai **cpu_dais;
+	unsigned int num_cpus;
+
 	struct delayed_work delayed_work;
 	void (*close_delayed_work_func)(struct snd_soc_pcm_runtime *rtd);
 #ifdef CONFIG_DEBUG_FS
@@ -1148,16 +1169,31 @@ struct snd_soc_pcm_runtime {
 	int num_components;
 	struct snd_soc_component *components[0]; /* CPU/Codec/Platform */
 };
+/* see soc_new_pcm_runtime()  */
+#define asoc_rtd_to_cpu(rtd, n)   (rtd)->dais[n]
+#define asoc_rtd_to_codec(rtd, n) (rtd)->dais[n + (rtd)->num_cpus]
+
 #define for_each_rtd_components(rtd, i, component)			\
 	for ((i) = 0;							\
 	     ((i) < rtd->num_components) && ((component) = rtd->components[i]);\
 	     (i)++)
-#define for_each_rtd_codec_dai(rtd, i, dai)\
-	for ((i) = 0;						       \
-	     ((i) < rtd->num_codecs) && ((dai) = rtd->codec_dais[i]); \
+#define for_each_rtd_cpu_dais(rtd, i, dai)				\
+	for ((i) = 0;							\
+	     ((i) < rtd->num_cpus) && ((dai) = rtd->cpu_dais[i]);	\
 	     (i)++)
-#define for_each_rtd_codec_dai_rollback(rtd, i, dai)		\
+#define for_each_rtd_cpu_dais_rollback(rtd, i, dai)		\
+	for (; (--(i) >= 0) && ((dai) = rtd->cpu_dais[i]);)
+#define for_each_rtd_codec_dais(rtd, i, dai)				\
+	for ((i) = 0;							\
+	     ((i) < rtd->num_codecs) && ((dai) = rtd->codec_dais[i]);	\
+	     (i)++)
+#define for_each_rtd_codec_dais_rollback(rtd, i, dai)		\
 	for (; (--(i) >= 0) && ((dai) = rtd->codec_dais[i]);)
+#define for_each_rtd_dais(rtd, i, dai)					\
+	for ((i) = 0;							\
+	     ((i) < (rtd)->num_cpus + (rtd)->num_codecs) &&		\
+		     ((dai) = (rtd)->dais[i]);				\
+	     (i)++)
 
 void snd_soc_close_delayed_work(struct snd_soc_pcm_runtime *rtd);
 
diff --git a/include/sound/sof/dai-intel.h b/include/sound/sof/dai-intel.h
index 5f1ef55..04e4822 100644
--- a/include/sound/sof/dai-intel.h
+++ b/include/sound/sof/dai-intel.h
@@ -87,6 +87,15 @@ struct sof_ipc_dai_hda_params {
 	uint32_t link_dma_ch;
 } __packed;
 
+/* ALH Configuration Request - SOF_IPC_DAI_ALH_CONFIG */
+struct sof_ipc_dai_alh_params {
+	struct sof_ipc_hdr hdr;
+	uint32_t stream_id;
+
+	/* reserved for future use */
+	uint32_t reserved[15];
+} __packed;
+
 /* DMIC Configuration Request - SOF_IPC_DAI_DMIC_CONFIG */
 
 /* This struct is defined per 2ch PDM controller available in the platform.
@@ -179,13 +188,4 @@ struct sof_ipc_dai_dmic_params {
 	struct sof_ipc_dai_dmic_pdm_ctrl pdm[0];
 } __packed;
 
-/* ALH Configuration Request - SOF_IPC_DAI_ALH_CONFIG */
-struct sof_ipc_dai_alh_params {
-	struct sof_ipc_hdr hdr;
-	uint32_t stream_id;
-
-	/* reserved for future use */
-	uint32_t reserved[15];
-} __packed;
-
 #endif
diff --git a/include/sound/sof/header.h b/include/sound/sof/header.h
index bf3edd9..b794795 100644
--- a/include/sound/sof/header.h
+++ b/include/sound/sof/header.h
@@ -51,6 +51,7 @@
 #define SOF_IPC_GLB_TRACE_MSG			SOF_GLB_TYPE(0x9U)
 #define SOF_IPC_GLB_GDB_DEBUG                   SOF_GLB_TYPE(0xAU)
 #define SOF_IPC_GLB_TEST_MSG			SOF_GLB_TYPE(0xBU)
+#define SOF_IPC_GLB_PROBE			SOF_GLB_TYPE(0xCU)
 
 /*
  * DSP Command Message Types
@@ -102,6 +103,16 @@
 #define SOF_IPC_STREAM_VORBIS_PARAMS		SOF_CMD_TYPE(0x010)
 #define SOF_IPC_STREAM_VORBIS_FREE		SOF_CMD_TYPE(0x011)
 
+/* probe */
+#define SOF_IPC_PROBE_INIT			SOF_CMD_TYPE(0x001)
+#define SOF_IPC_PROBE_DEINIT			SOF_CMD_TYPE(0x002)
+#define SOF_IPC_PROBE_DMA_ADD			SOF_CMD_TYPE(0x003)
+#define SOF_IPC_PROBE_DMA_INFO			SOF_CMD_TYPE(0x004)
+#define SOF_IPC_PROBE_DMA_REMOVE		SOF_CMD_TYPE(0x005)
+#define SOF_IPC_PROBE_POINT_ADD		SOF_CMD_TYPE(0x006)
+#define SOF_IPC_PROBE_POINT_INFO		SOF_CMD_TYPE(0x007)
+#define SOF_IPC_PROBE_POINT_REMOVE		SOF_CMD_TYPE(0x008)
+
 /* trace */
 #define SOF_IPC_TRACE_DMA_PARAMS		SOF_CMD_TYPE(0x001)
 #define SOF_IPC_TRACE_DMA_POSITION		SOF_CMD_TYPE(0x002)
diff --git a/include/sound/sof/info.h b/include/sound/sof/info.h
index 1c56014..438a11f 100644
--- a/include/sound/sof/info.h
+++ b/include/sound/sof/info.h
@@ -28,9 +28,9 @@
 
 /* extended data types that can be appended onto end of sof_ipc_fw_ready */
 enum sof_ipc_ext_data {
-	SOF_IPC_EXT_DMA_BUFFER = 0,
-	SOF_IPC_EXT_WINDOW,
-	SOF_IPC_EXT_CC_INFO,
+	SOF_IPC_EXT_UNUSED		= 0,
+	SOF_IPC_EXT_WINDOW		= 1,
+	SOF_IPC_EXT_CC_INFO		= 2,
 };
 
 /* FW version - SOF_IPC_GLB_VERSION */
@@ -83,22 +83,6 @@ struct sof_ipc_ext_data_hdr {
 	uint32_t type;		/**< SOF_IPC_EXT_ */
 } __packed;
 
-struct sof_ipc_dma_buffer_elem {
-	struct sof_ipc_hdr hdr;
-	uint32_t type;		/**< SOF_IPC_REGION_ */
-	uint32_t id;		/**< platform specific - used to map to host memory */
-	struct sof_ipc_host_buffer buffer;
-} __packed;
-
-/* extended data DMA buffers for IPC, trace and debug */
-struct sof_ipc_dma_buffer_data {
-	struct sof_ipc_ext_data_hdr ext_hdr;
-	uint32_t num_buffers;
-
-	/* host files in buffer[n].buffer */
-	struct sof_ipc_dma_buffer_elem buffer[];
-}  __packed;
-
 struct sof_ipc_window_elem {
 	struct sof_ipc_hdr hdr;
 	uint32_t type;		/**< SOF_IPC_REGION_ */
diff --git a/include/sound/sof/topology.h b/include/sound/sof/topology.h
index 8e76178..402e025 100644
--- a/include/sound/sof/topology.h
+++ b/include/sound/sof/topology.h
@@ -53,9 +53,10 @@ struct sof_ipc_comp {
 	uint32_t id;
 	enum sof_comp_type type;
 	uint32_t pipeline_id;
+	uint32_t core;
 
 	/* reserved for future use */
-	uint32_t reserved[2];
+	uint32_t reserved[1];
 } __packed;
 
 /*
diff --git a/include/target/iscsi/iscsi_target_core.h b/include/target/iscsi/iscsi_target_core.h
index a49d371..591cd9e 100644
--- a/include/target/iscsi/iscsi_target_core.h
+++ b/include/target/iscsi/iscsi_target_core.h
@@ -676,7 +676,7 @@ struct iscsi_session {
 	atomic_t		session_logout;
 	atomic_t		session_reinstatement;
 	atomic_t		session_stop_active;
-	atomic_t		sleep_on_sess_wait_comp;
+	atomic_t		session_close;
 	/* connection list */
 	struct list_head	sess_conn_list;
 	struct list_head	cr_active_list;
diff --git a/include/target/target_core_backend.h b/include/target/target_core_backend.h
index 51b6f50..1b752d8 100644
--- a/include/target/target_core_backend.h
+++ b/include/target/target_core_backend.h
@@ -116,10 +116,4 @@ static inline bool target_dev_configured(struct se_device *se_dev)
 	return !!(se_dev->dev_flags & DF_CONFIGURED);
 }
 
-/* Only use get_unaligned_be24() if reading p - 1 is allowed. */
-static inline uint32_t get_unaligned_be24(const uint8_t *const p)
-{
-	return get_unaligned_be32(p - 1) & 0xffffffU;
-}
-
 #endif /* TARGET_CORE_BACKEND_H */
diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h
index 1728e88..6d4a694 100644
--- a/include/target/target_core_base.h
+++ b/include/target/target_core_base.h
@@ -74,8 +74,6 @@
 #define DA_EMULATE_MODEL_ALIAS			0
 /* Emulation for WriteCache and SYNCHRONIZE_CACHE */
 #define DA_EMULATE_WRITE_CACHE			0
-/* Emulation for UNIT ATTENTION Interlock Control */
-#define DA_EMULATE_UA_INTLLCK_CTRL		0
 /* Emulation for TASK_ABORTED status (TAS) by default */
 #define DA_EMULATE_TAS				1
 /* Emulation for Thin Provisioning UNMAP using block/blk-lib.c:blkdev_issue_discard() */
@@ -433,6 +431,13 @@ enum target_prot_type {
 	TARGET_DIF_TYPE3_PROT,
 };
 
+/* Emulation for UNIT ATTENTION Interlock Control */
+enum target_ua_intlck_ctrl {
+	TARGET_UA_INTLCK_CTRL_CLEAR = 0,
+	TARGET_UA_INTLCK_CTRL_NO_CLEAR = 1,
+	TARGET_UA_INTLCK_CTRL_ESTABLISH_UA = 2,
+};
+
 enum target_core_dif_check {
 	TARGET_DIF_CHECK_GUARD  = 0x1 << 0,
 	TARGET_DIF_CHECK_APPTAG = 0x1 << 1,
@@ -663,26 +668,26 @@ struct se_dev_entry {
 };
 
 struct se_dev_attrib {
-	int		emulate_model_alias;
-	int		emulate_dpo;
-	int		emulate_fua_write;
-	int		emulate_fua_read;
-	int		emulate_write_cache;
-	int		emulate_ua_intlck_ctrl;
-	int		emulate_tas;
-	int		emulate_tpu;
-	int		emulate_tpws;
-	int		emulate_caw;
-	int		emulate_3pc;
-	int		emulate_pr;
+	bool		emulate_model_alias;
+	bool		emulate_dpo;		/* deprecated */
+	bool		emulate_fua_write;
+	bool		emulate_fua_read;	/* deprecated */
+	bool		emulate_write_cache;
+	enum target_ua_intlck_ctrl emulate_ua_intlck_ctrl;
+	bool		emulate_tas;
+	bool		emulate_tpu;
+	bool		emulate_tpws;
+	bool		emulate_caw;
+	bool		emulate_3pc;
+	bool		emulate_pr;
 	enum target_prot_type pi_prot_type;
 	enum target_prot_type hw_pi_prot_type;
-	int		pi_prot_verify;
-	int		enforce_pr_isids;
-	int		force_pr_aptpl;
-	int		is_nonrot;
-	int		emulate_rest_reord;
-	int		unmap_zeroes_data;
+	bool		pi_prot_verify;
+	bool		enforce_pr_isids;
+	bool		force_pr_aptpl;
+	bool		is_nonrot;
+	bool		emulate_rest_reord;
+	bool		unmap_zeroes_data;
 	u32		hw_block_size;
 	u32		block_size;
 	u32		hw_max_sectors;
diff --git a/include/trace/events/f2fs.h b/include/trace/events/f2fs.h
index 67a9783..d97adfc 100644
--- a/include/trace/events/f2fs.h
+++ b/include/trace/events/f2fs.h
@@ -153,7 +153,8 @@ TRACE_DEFINE_ENUM(CP_PAUSE);
 #define show_compress_algorithm(type)					\
 	__print_symbolic(type,						\
 		{ COMPRESS_LZO,		"LZO" },			\
-		{ COMPRESS_LZ4,		"LZ4" })
+		{ COMPRESS_LZ4,		"LZ4" },			\
+		{ COMPRESS_ZSTD,	"ZSTD" })
 
 struct f2fs_sb_info;
 struct f2fs_io_info;
diff --git a/include/trace/events/gpu_mem.h b/include/trace/events/gpu_mem.h
new file mode 100644
index 0000000..1897822
--- /dev/null
+++ b/include/trace/events/gpu_mem.h
@@ -0,0 +1,57 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * GPU memory trace points
+ *
+ * Copyright (C) 2020 Google, Inc.
+ */
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM gpu_mem
+
+#if !defined(_TRACE_GPU_MEM_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_GPU_MEM_H
+
+#include <linux/tracepoint.h>
+
+/*
+ * The gpu_memory_total event indicates that there's an update to either the
+ * global or process total gpu memory counters.
+ *
+ * This event should be emitted whenever the kernel device driver allocates,
+ * frees, imports, unimports memory in the GPU addressable space.
+ *
+ * @gpu_id: This is the gpu id.
+ *
+ * @pid: Put 0 for global total, while positive pid for process total.
+ *
+ * @size: Virtual size of the allocation in bytes.
+ *
+ */
+TRACE_EVENT(gpu_mem_total,
+
+	TP_PROTO(uint32_t gpu_id, uint32_t pid, uint64_t size),
+
+	TP_ARGS(gpu_id, pid, size),
+
+	TP_STRUCT__entry(
+		__field(uint32_t, gpu_id)
+		__field(uint32_t, pid)
+		__field(uint64_t, size)
+	),
+
+	TP_fast_assign(
+		__entry->gpu_id = gpu_id;
+		__entry->pid = pid;
+		__entry->size = size;
+	),
+
+	TP_printk("gpu_id=%u pid=%u size=%llu",
+		__entry->gpu_id,
+		__entry->pid,
+		__entry->size)
+);
+
+#endif /* _TRACE_GPU_MEM_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/huge_memory.h b/include/trace/events/huge_memory.h
index d82a0f4..70e32ff 100644
--- a/include/trace/events/huge_memory.h
+++ b/include/trace/events/huge_memory.h
@@ -13,6 +13,7 @@
 	EM( SCAN_PMD_NULL,		"pmd_null")			\
 	EM( SCAN_EXCEED_NONE_PTE,	"exceed_none_pte")		\
 	EM( SCAN_PTE_NON_PRESENT,	"pte_non_present")		\
+	EM( SCAN_PTE_UFFD_WP,		"pte_uffd_wp")			\
 	EM( SCAN_PAGE_RO,		"no_writable_page")		\
 	EM( SCAN_LACK_REFERENCED_PAGE,	"lack_referenced_page")		\
 	EM( SCAN_PAGE_NULL,		"page_null")			\
diff --git a/include/trace/events/mmflags.h b/include/trace/events/mmflags.h
index a1675d4..5fb7520 100644
--- a/include/trace/events/mmflags.h
+++ b/include/trace/events/mmflags.h
@@ -154,6 +154,7 @@ IF_HAVE_PG_IDLE(PG_idle,		"idle"		)
 	{VM_ACCOUNT,			"account"	},		\
 	{VM_NORESERVE,			"noreserve"	},		\
 	{VM_HUGETLB,			"hugetlb"	},		\
+	{VM_SYNC,			"sync"		},		\
 	__VM_ARCH_SPECIFIC_1				,		\
 	{VM_WIPEONFORK,			"wipeonfork"	},		\
 	{VM_DONTDUMP,			"dontdump"	},		\
diff --git a/include/trace/events/qla.h b/include/trace/events/qla.h
new file mode 100644
index 0000000..b71f680
--- /dev/null
+++ b/include/trace/events/qla.h
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#if !defined(_TRACE_QLA_H_) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_QLA_H_
+
+#include <linux/tracepoint.h>
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM qla
+
+#define QLA_MSG_MAX 256
+
+DECLARE_EVENT_CLASS(qla_log_event,
+	TP_PROTO(const char *buf,
+		struct va_format *vaf),
+
+	TP_ARGS(buf, vaf),
+
+	TP_STRUCT__entry(
+		__string(buf, buf)
+		__dynamic_array(char, msg, QLA_MSG_MAX)
+	),
+	TP_fast_assign(
+		__assign_str(buf, buf);
+		vsnprintf(__get_str(msg), QLA_MSG_MAX, vaf->fmt, *vaf->va);
+	),
+
+	TP_printk("%s %s", __get_str(buf), __get_str(msg))
+);
+
+DEFINE_EVENT(qla_log_event, ql_dbg_log,
+	TP_PROTO(const char *buf, struct va_format *vaf),
+	TP_ARGS(buf, vaf)
+);
+
+#endif /* _TRACE_QLA_H */
+
+#define TRACE_INCLUDE_FILE qla
+
+#include <trace/define_trace.h>
diff --git a/include/trace/events/rpcgss.h b/include/trace/events/rpcgss.h
index 9827f53..32d88c4 100644
--- a/include/trace/events/rpcgss.h
+++ b/include/trace/events/rpcgss.h
@@ -126,7 +126,7 @@ DEFINE_GSSAPI_EVENT(verify_mic);
 DEFINE_GSSAPI_EVENT(wrap);
 DEFINE_GSSAPI_EVENT(unwrap);
 
-TRACE_EVENT(rpcgss_accept_upcall,
+TRACE_EVENT(rpcgss_svc_accept_upcall,
 	TP_PROTO(
 		__be32 xid,
 		u32 major_status,
@@ -154,6 +154,29 @@ TRACE_EVENT(rpcgss_accept_upcall,
 	)
 );
 
+TRACE_EVENT(rpcgss_svc_accept,
+	TP_PROTO(
+		__be32 xid,
+		size_t len
+	),
+
+	TP_ARGS(xid, len),
+
+	TP_STRUCT__entry(
+		__field(u32, xid)
+		__field(size_t, len)
+	),
+
+	TP_fast_assign(
+		__entry->xid = be32_to_cpu(xid);
+		__entry->len = len;
+	),
+
+	TP_printk("xid=0x%08x len=%zu",
+		__entry->xid, __entry->len
+	)
+);
+
 
 /**
  ** GSS auth unwrap failures
@@ -268,6 +291,40 @@ TRACE_EVENT(rpcgss_need_reencode,
 		__entry->ret ? "" : "un")
 );
 
+DECLARE_EVENT_CLASS(rpcgss_svc_seqno_class,
+	TP_PROTO(
+		__be32 xid,
+		u32 seqno
+	),
+
+	TP_ARGS(xid, seqno),
+
+	TP_STRUCT__entry(
+		__field(u32, xid)
+		__field(u32, seqno)
+	),
+
+	TP_fast_assign(
+		__entry->xid = be32_to_cpu(xid);
+		__entry->seqno = seqno;
+	),
+
+	TP_printk("xid=0x%08x seqno=%u, request discarded",
+		__entry->xid, __entry->seqno)
+);
+
+#define DEFINE_SVC_SEQNO_EVENT(name)					\
+	DEFINE_EVENT(rpcgss_svc_seqno_class, rpcgss_svc_##name,		\
+			TP_PROTO(					\
+				__be32 xid,				\
+				u32 seqno				\
+			),						\
+			TP_ARGS(xid, seqno))
+
+DEFINE_SVC_SEQNO_EVENT(large_seqno);
+DEFINE_SVC_SEQNO_EVENT(old_seqno);
+
+
 /**
  ** gssd upcall related trace events
  **/
diff --git a/include/trace/events/rpcrdma.h b/include/trace/events/rpcrdma.h
index c0e4c93..051f26f 100644
--- a/include/trace/events/rpcrdma.h
+++ b/include/trace/events/rpcrdma.h
@@ -104,12 +104,12 @@ DECLARE_EVENT_CLASS(xprtrdma_connect_class,
 	TP_fast_assign(
 		__entry->r_xprt = r_xprt;
 		__entry->rc = rc;
-		__entry->connect_status = r_xprt->rx_ep.rep_connected;
+		__entry->connect_status = r_xprt->rx_ep->re_connect_status;
 		__assign_str(addr, rpcrdma_addrstr(r_xprt));
 		__assign_str(port, rpcrdma_portstr(r_xprt));
 	),
 
-	TP_printk("peer=[%s]:%s r_xprt=%p: rc=%d connect status=%d",
+	TP_printk("peer=[%s]:%s r_xprt=%p: rc=%d connection status=%d",
 		__get_str(addr), __get_str(port), __entry->r_xprt,
 		__entry->rc, __entry->connect_status
 	)
@@ -228,20 +228,20 @@ DECLARE_EVENT_CLASS(xprtrdma_frwr_done,
 	TP_ARGS(wc, frwr),
 
 	TP_STRUCT__entry(
-		__field(const void *, mr)
+		__field(u32, mr_id)
 		__field(unsigned int, status)
 		__field(unsigned int, vendor_err)
 	),
 
 	TP_fast_assign(
-		__entry->mr = container_of(frwr, struct rpcrdma_mr, frwr);
+		__entry->mr_id = frwr->fr_mr->res.id;
 		__entry->status = wc->status;
 		__entry->vendor_err = __entry->status ? wc->vendor_err : 0;
 	),
 
 	TP_printk(
-		"mr=%p: %s (%u/0x%x)",
-		__entry->mr, rdma_show_wc_status(__entry->status),
+		"mr.id=%u: %s (%u/0x%x)",
+		__entry->mr_id, rdma_show_wc_status(__entry->status),
 		__entry->status, __entry->vendor_err
 	)
 );
@@ -274,7 +274,8 @@ DECLARE_EVENT_CLASS(xprtrdma_mr,
 	TP_ARGS(mr),
 
 	TP_STRUCT__entry(
-		__field(const void *, mr)
+		__field(u32, mr_id)
+		__field(int, nents)
 		__field(u32, handle)
 		__field(u32, length)
 		__field(u64, offset)
@@ -282,15 +283,16 @@ DECLARE_EVENT_CLASS(xprtrdma_mr,
 	),
 
 	TP_fast_assign(
-		__entry->mr = mr;
+		__entry->mr_id  = mr->frwr.fr_mr->res.id;
+		__entry->nents  = mr->mr_nents;
 		__entry->handle = mr->mr_handle;
 		__entry->length = mr->mr_length;
 		__entry->offset = mr->mr_offset;
 		__entry->dir    = mr->mr_dir;
 	),
 
-	TP_printk("mr=%p %u@0x%016llx:0x%08x (%s)",
-		__entry->mr, __entry->length,
+	TP_printk("mr.id=%u nents=%d %u@0x%016llx:0x%08x (%s)",
+		__entry->mr_id, __entry->nents, __entry->length,
 		(unsigned long long)__entry->offset, __entry->handle,
 		xprtrdma_show_direction(__entry->dir)
 	)
@@ -340,68 +342,37 @@ DECLARE_EVENT_CLASS(xprtrdma_cb_event,
  ** Connection events
  **/
 
-TRACE_EVENT(xprtrdma_cm_event,
-	TP_PROTO(
-		const struct rpcrdma_xprt *r_xprt,
-		struct rdma_cm_event *event
-	),
-
-	TP_ARGS(r_xprt, event),
-
-	TP_STRUCT__entry(
-		__field(const void *, r_xprt)
-		__field(unsigned int, event)
-		__field(int, status)
-		__string(addr, rpcrdma_addrstr(r_xprt))
-		__string(port, rpcrdma_portstr(r_xprt))
-	),
-
-	TP_fast_assign(
-		__entry->r_xprt = r_xprt;
-		__entry->event = event->event;
-		__entry->status = event->status;
-		__assign_str(addr, rpcrdma_addrstr(r_xprt));
-		__assign_str(port, rpcrdma_portstr(r_xprt));
-	),
-
-	TP_printk("peer=[%s]:%s r_xprt=%p: %s (%u/%d)",
-		__get_str(addr), __get_str(port),
-		__entry->r_xprt, rdma_show_cm_event(__entry->event),
-		__entry->event, __entry->status
-	)
-);
-
 TRACE_EVENT(xprtrdma_inline_thresh,
 	TP_PROTO(
-		const struct rpcrdma_xprt *r_xprt
+		const struct rpcrdma_ep *ep
 	),
 
-	TP_ARGS(r_xprt),
+	TP_ARGS(ep),
 
 	TP_STRUCT__entry(
-		__field(const void *, r_xprt)
 		__field(unsigned int, inline_send)
 		__field(unsigned int, inline_recv)
 		__field(unsigned int, max_send)
 		__field(unsigned int, max_recv)
-		__string(addr, rpcrdma_addrstr(r_xprt))
-		__string(port, rpcrdma_portstr(r_xprt))
+		__array(unsigned char, srcaddr, sizeof(struct sockaddr_in6))
+		__array(unsigned char, dstaddr, sizeof(struct sockaddr_in6))
 	),
 
 	TP_fast_assign(
-		const struct rpcrdma_ep *ep = &r_xprt->rx_ep;
+		const struct rdma_cm_id *id = ep->re_id;
 
-		__entry->r_xprt = r_xprt;
-		__entry->inline_send = ep->rep_inline_send;
-		__entry->inline_recv = ep->rep_inline_recv;
-		__entry->max_send = ep->rep_max_inline_send;
-		__entry->max_recv = ep->rep_max_inline_recv;
-		__assign_str(addr, rpcrdma_addrstr(r_xprt));
-		__assign_str(port, rpcrdma_portstr(r_xprt));
+		__entry->inline_send = ep->re_inline_send;
+		__entry->inline_recv = ep->re_inline_recv;
+		__entry->max_send = ep->re_max_inline_send;
+		__entry->max_recv = ep->re_max_inline_recv;
+		memcpy(__entry->srcaddr, &id->route.addr.src_addr,
+		       sizeof(struct sockaddr_in6));
+		memcpy(__entry->dstaddr, &id->route.addr.dst_addr,
+		       sizeof(struct sockaddr_in6));
 	),
 
-	TP_printk("peer=[%s]:%s r_xprt=%p neg send/recv=%u/%u, calc send/recv=%u/%u",
-		__get_str(addr), __get_str(port), __entry->r_xprt,
+	TP_printk("%pISpc -> %pISpc neg send/recv=%u/%u, calc send/recv=%u/%u",
+		__entry->srcaddr, __entry->dstaddr,
 		__entry->inline_send, __entry->inline_recv,
 		__entry->max_send, __entry->max_recv
 	)
@@ -409,11 +380,10 @@ TRACE_EVENT(xprtrdma_inline_thresh,
 
 DEFINE_CONN_EVENT(connect);
 DEFINE_CONN_EVENT(disconnect);
+DEFINE_CONN_EVENT(flush_dct);
 
 DEFINE_RXPRT_EVENT(xprtrdma_create);
 DEFINE_RXPRT_EVENT(xprtrdma_op_destroy);
-DEFINE_RXPRT_EVENT(xprtrdma_remove);
-DEFINE_RXPRT_EVENT(xprtrdma_reinsert);
 DEFINE_RXPRT_EVENT(xprtrdma_op_inject_dsc);
 DEFINE_RXPRT_EVENT(xprtrdma_op_close);
 DEFINE_RXPRT_EVENT(xprtrdma_op_setport);
@@ -480,32 +450,33 @@ TRACE_EVENT(xprtrdma_op_set_cto,
 
 TRACE_EVENT(xprtrdma_qp_event,
 	TP_PROTO(
-		const struct rpcrdma_xprt *r_xprt,
+		const struct rpcrdma_ep *ep,
 		const struct ib_event *event
 	),
 
-	TP_ARGS(r_xprt, event),
+	TP_ARGS(ep, event),
 
 	TP_STRUCT__entry(
-		__field(const void *, r_xprt)
-		__field(unsigned int, event)
+		__field(unsigned long, event)
 		__string(name, event->device->name)
-		__string(addr, rpcrdma_addrstr(r_xprt))
-		__string(port, rpcrdma_portstr(r_xprt))
+		__array(unsigned char, srcaddr, sizeof(struct sockaddr_in6))
+		__array(unsigned char, dstaddr, sizeof(struct sockaddr_in6))
 	),
 
 	TP_fast_assign(
-		__entry->r_xprt = r_xprt;
+		const struct rdma_cm_id *id = ep->re_id;
+
 		__entry->event = event->event;
 		__assign_str(name, event->device->name);
-		__assign_str(addr, rpcrdma_addrstr(r_xprt));
-		__assign_str(port, rpcrdma_portstr(r_xprt));
+		memcpy(__entry->srcaddr, &id->route.addr.src_addr,
+		       sizeof(struct sockaddr_in6));
+		memcpy(__entry->dstaddr, &id->route.addr.dst_addr,
+		       sizeof(struct sockaddr_in6));
 	),
 
-	TP_printk("peer=[%s]:%s r_xprt=%p: dev %s: %s (%u)",
-		__get_str(addr), __get_str(port), __entry->r_xprt,
-		__get_str(name), rdma_show_ib_event(__entry->event),
-		__entry->event
+	TP_printk("%pISpc -> %pISpc device=%s %s (%lu)",
+		__entry->srcaddr, __entry->dstaddr, __get_str(name),
+		rdma_show_ib_event(__entry->event), __entry->event
 	)
 );
 
@@ -801,7 +772,7 @@ TRACE_EVENT(xprtrdma_post_recvs,
 		__entry->r_xprt = r_xprt;
 		__entry->count = count;
 		__entry->status = status;
-		__entry->posted = r_xprt->rx_ep.rep_receive_count;
+		__entry->posted = r_xprt->rx_ep->re_receive_count;
 		__assign_str(addr, rpcrdma_addrstr(r_xprt));
 		__assign_str(port, rpcrdma_portstr(r_xprt));
 	),
@@ -920,17 +891,17 @@ TRACE_EVENT(xprtrdma_frwr_alloc,
 	TP_ARGS(mr, rc),
 
 	TP_STRUCT__entry(
-		__field(const void *, mr)
+		__field(u32, mr_id)
 		__field(int, rc)
 	),
 
 	TP_fast_assign(
-		__entry->mr = mr;
-		__entry->rc	= rc;
+		__entry->mr_id = mr->frwr.fr_mr->res.id;
+		__entry->rc = rc;
 	),
 
-	TP_printk("mr=%p: rc=%d",
-		__entry->mr, __entry->rc
+	TP_printk("mr.id=%u: rc=%d",
+		__entry->mr_id, __entry->rc
 	)
 );
 
@@ -943,7 +914,8 @@ TRACE_EVENT(xprtrdma_frwr_dereg,
 	TP_ARGS(mr, rc),
 
 	TP_STRUCT__entry(
-		__field(const void *, mr)
+		__field(u32, mr_id)
+		__field(int, nents)
 		__field(u32, handle)
 		__field(u32, length)
 		__field(u64, offset)
@@ -952,7 +924,8 @@ TRACE_EVENT(xprtrdma_frwr_dereg,
 	),
 
 	TP_fast_assign(
-		__entry->mr = mr;
+		__entry->mr_id  = mr->frwr.fr_mr->res.id;
+		__entry->nents  = mr->mr_nents;
 		__entry->handle = mr->mr_handle;
 		__entry->length = mr->mr_length;
 		__entry->offset = mr->mr_offset;
@@ -960,8 +933,8 @@ TRACE_EVENT(xprtrdma_frwr_dereg,
 		__entry->rc	= rc;
 	),
 
-	TP_printk("mr=%p %u@0x%016llx:0x%08x (%s): rc=%d",
-		__entry->mr, __entry->length,
+	TP_printk("mr.id=%u nents=%d %u@0x%016llx:0x%08x (%s): rc=%d",
+		__entry->mr_id, __entry->nents, __entry->length,
 		(unsigned long long)__entry->offset, __entry->handle,
 		xprtrdma_show_direction(__entry->dir),
 		__entry->rc
@@ -977,21 +950,21 @@ TRACE_EVENT(xprtrdma_frwr_sgerr,
 	TP_ARGS(mr, sg_nents),
 
 	TP_STRUCT__entry(
-		__field(const void *, mr)
+		__field(u32, mr_id)
 		__field(u64, addr)
 		__field(u32, dir)
 		__field(int, nents)
 	),
 
 	TP_fast_assign(
-		__entry->mr = mr;
+		__entry->mr_id = mr->frwr.fr_mr->res.id;
 		__entry->addr = mr->mr_sg->dma_address;
 		__entry->dir = mr->mr_dir;
 		__entry->nents = sg_nents;
 	),
 
-	TP_printk("mr=%p dma addr=0x%llx (%s) sg_nents=%d",
-		__entry->mr, __entry->addr,
+	TP_printk("mr.id=%u DMA addr=0x%llx (%s) sg_nents=%d",
+		__entry->mr_id, __entry->addr,
 		xprtrdma_show_direction(__entry->dir),
 		__entry->nents
 	)
@@ -1006,7 +979,7 @@ TRACE_EVENT(xprtrdma_frwr_maperr,
 	TP_ARGS(mr, num_mapped),
 
 	TP_STRUCT__entry(
-		__field(const void *, mr)
+		__field(u32, mr_id)
 		__field(u64, addr)
 		__field(u32, dir)
 		__field(int, num_mapped)
@@ -1014,15 +987,15 @@ TRACE_EVENT(xprtrdma_frwr_maperr,
 	),
 
 	TP_fast_assign(
-		__entry->mr = mr;
+		__entry->mr_id = mr->frwr.fr_mr->res.id;
 		__entry->addr = mr->mr_sg->dma_address;
 		__entry->dir = mr->mr_dir;
 		__entry->num_mapped = num_mapped;
 		__entry->nents = mr->mr_nents;
 	),
 
-	TP_printk("mr=%p dma addr=0x%llx (%s) nents=%d of %d",
-		__entry->mr, __entry->addr,
+	TP_printk("mr.id=%u DMA addr=0x%llx (%s) nents=%d of %d",
+		__entry->mr_id, __entry->addr,
 		xprtrdma_show_direction(__entry->dir),
 		__entry->num_mapped, __entry->nents
 	)
@@ -1031,7 +1004,7 @@ TRACE_EVENT(xprtrdma_frwr_maperr,
 DEFINE_MR_EVENT(localinv);
 DEFINE_MR_EVENT(map);
 DEFINE_MR_EVENT(unmap);
-DEFINE_MR_EVENT(remoteinv);
+DEFINE_MR_EVENT(reminv);
 DEFINE_MR_EVENT(recycle);
 
 TRACE_EVENT(xprtrdma_dma_maperr,
@@ -1469,7 +1442,7 @@ DECLARE_EVENT_CLASS(svcrdma_segment_event,
 );
 
 #define DEFINE_SEGMENT_EVENT(name)					\
-		DEFINE_EVENT(svcrdma_segment_event, svcrdma_encode_##name,\
+		DEFINE_EVENT(svcrdma_segment_event, svcrdma_##name,\
 				TP_PROTO(				\
 					u32 handle,			\
 					u32 length,			\
@@ -1477,8 +1450,11 @@ DECLARE_EVENT_CLASS(svcrdma_segment_event,
 				),					\
 				TP_ARGS(handle, length, offset))
 
-DEFINE_SEGMENT_EVENT(rseg);
-DEFINE_SEGMENT_EVENT(wseg);
+DEFINE_SEGMENT_EVENT(decode_wseg);
+DEFINE_SEGMENT_EVENT(encode_rseg);
+DEFINE_SEGMENT_EVENT(send_rseg);
+DEFINE_SEGMENT_EVENT(encode_wseg);
+DEFINE_SEGMENT_EVENT(send_wseg);
 
 DECLARE_EVENT_CLASS(svcrdma_chunk_event,
 	TP_PROTO(
@@ -1501,17 +1477,19 @@ DECLARE_EVENT_CLASS(svcrdma_chunk_event,
 );
 
 #define DEFINE_CHUNK_EVENT(name)					\
-		DEFINE_EVENT(svcrdma_chunk_event, svcrdma_encode_##name,\
+		DEFINE_EVENT(svcrdma_chunk_event, svcrdma_##name,	\
 				TP_PROTO(				\
 					u32 length			\
 				),					\
 				TP_ARGS(length))
 
-DEFINE_CHUNK_EVENT(pzr);
-DEFINE_CHUNK_EVENT(write);
-DEFINE_CHUNK_EVENT(reply);
+DEFINE_CHUNK_EVENT(send_pzr);
+DEFINE_CHUNK_EVENT(encode_write_chunk);
+DEFINE_CHUNK_EVENT(send_write_chunk);
+DEFINE_CHUNK_EVENT(encode_read_chunk);
+DEFINE_CHUNK_EVENT(send_reply_chunk);
 
-TRACE_EVENT(svcrdma_encode_read,
+TRACE_EVENT(svcrdma_send_read_chunk,
 	TP_PROTO(
 		u32 length,
 		u32 position
@@ -1634,6 +1612,24 @@ TRACE_EVENT(svcrdma_dma_map_rwctx,
 	)
 );
 
+TRACE_EVENT(svcrdma_send_pullup,
+	TP_PROTO(
+		unsigned int len
+	),
+
+	TP_ARGS(len),
+
+	TP_STRUCT__entry(
+		__field(unsigned int, len)
+	),
+
+	TP_fast_assign(
+		__entry->len = len;
+	),
+
+	TP_printk("len=%u", __entry->len)
+);
+
 TRACE_EVENT(svcrdma_send_failed,
 	TP_PROTO(
 		const struct svc_rqst *rqst,
@@ -1813,34 +1809,6 @@ TRACE_EVENT(svcrdma_post_rw,
 DEFINE_SENDCOMP_EVENT(read);
 DEFINE_SENDCOMP_EVENT(write);
 
-TRACE_EVENT(svcrdma_cm_event,
-	TP_PROTO(
-		const struct rdma_cm_event *event,
-		const struct sockaddr *sap
-	),
-
-	TP_ARGS(event, sap),
-
-	TP_STRUCT__entry(
-		__field(unsigned int, event)
-		__field(int, status)
-		__array(__u8, addr, INET6_ADDRSTRLEN + 10)
-	),
-
-	TP_fast_assign(
-		__entry->event = event->event;
-		__entry->status = event->status;
-		snprintf(__entry->addr, sizeof(__entry->addr) - 1,
-			 "%pISpc", sap);
-	),
-
-	TP_printk("addr=%s event=%s (%u/%d)",
-		__entry->addr,
-		rdma_show_cm_event(__entry->event),
-		__entry->event, __entry->status
-	)
-);
-
 TRACE_EVENT(svcrdma_qp_error,
 	TP_PROTO(
 		const struct ib_event *event,
diff --git a/include/trace/events/sunrpc.h b/include/trace/events/sunrpc.h
index ee99357..ffd2215 100644
--- a/include/trace/events/sunrpc.h
+++ b/include/trace/events/sunrpc.h
@@ -14,6 +14,49 @@
 #include <linux/net.h>
 #include <linux/tracepoint.h>
 
+DECLARE_EVENT_CLASS(xdr_buf_class,
+	TP_PROTO(
+		const struct xdr_buf *xdr
+	),
+
+	TP_ARGS(xdr),
+
+	TP_STRUCT__entry(
+		__field(const void *, head_base)
+		__field(size_t, head_len)
+		__field(const void *, tail_base)
+		__field(size_t, tail_len)
+		__field(unsigned int, page_len)
+		__field(unsigned int, msg_len)
+	),
+
+	TP_fast_assign(
+		__entry->head_base = xdr->head[0].iov_base;
+		__entry->head_len = xdr->head[0].iov_len;
+		__entry->tail_base = xdr->tail[0].iov_base;
+		__entry->tail_len = xdr->tail[0].iov_len;
+		__entry->page_len = xdr->page_len;
+		__entry->msg_len = xdr->len;
+	),
+
+	TP_printk("head=[%p,%zu] page=%u tail=[%p,%zu] len=%u",
+		__entry->head_base, __entry->head_len, __entry->page_len,
+		__entry->tail_base, __entry->tail_len, __entry->msg_len
+	)
+);
+
+#define DEFINE_XDRBUF_EVENT(name)					\
+		DEFINE_EVENT(xdr_buf_class, name,			\
+				TP_PROTO(				\
+					const struct xdr_buf *xdr	\
+				),					\
+				TP_ARGS(xdr))
+
+DEFINE_XDRBUF_EVENT(xprt_sendto);
+DEFINE_XDRBUF_EVENT(xprt_recvfrom);
+DEFINE_XDRBUF_EVENT(svc_recvfrom);
+DEFINE_XDRBUF_EVENT(svc_sendto);
+
 TRACE_DEFINE_ENUM(RPC_AUTH_OK);
 TRACE_DEFINE_ENUM(RPC_AUTH_BADCRED);
 TRACE_DEFINE_ENUM(RPC_AUTH_REJECTEDCRED);
@@ -1292,6 +1335,39 @@ DECLARE_EVENT_CLASS(svc_deferred_event,
 DEFINE_SVC_DEFERRED_EVENT(drop);
 DEFINE_SVC_DEFERRED_EVENT(revisit);
 
+DECLARE_EVENT_CLASS(cache_event,
+	TP_PROTO(
+		const struct cache_detail *cd,
+		const struct cache_head *h
+	),
+
+	TP_ARGS(cd, h),
+
+	TP_STRUCT__entry(
+		__field(const struct cache_head *, h)
+		__string(name, cd->name)
+	),
+
+	TP_fast_assign(
+		__entry->h = h;
+		__assign_str(name, cd->name);
+	),
+
+	TP_printk("cache=%s entry=%p", __get_str(name), __entry->h)
+);
+#define DEFINE_CACHE_EVENT(name) \
+	DEFINE_EVENT(cache_event, name, \
+			TP_PROTO( \
+				const struct cache_detail *cd, \
+				const struct cache_head *h \
+			), \
+			TP_ARGS(cd, h))
+DEFINE_CACHE_EVENT(cache_entry_expired);
+DEFINE_CACHE_EVENT(cache_entry_upcall);
+DEFINE_CACHE_EVENT(cache_entry_update);
+DEFINE_CACHE_EVENT(cache_entry_make_negative);
+DEFINE_CACHE_EVENT(cache_entry_no_listener);
+
 #endif /* _TRACE_SUNRPC_H */
 
 #include <trace/define_trace.h>
diff --git a/include/trace/events/target.h b/include/trace/events/target.h
index 914a872..77408ed 100644
--- a/include/trace/events/target.h
+++ b/include/trace/events/target.h
@@ -137,6 +137,7 @@ TRACE_EVENT(target_sequencer_start,
 
 	TP_STRUCT__entry(
 		__field( unsigned int,	unpacked_lun	)
+		__field( unsigned long long,	tag	)
 		__field( unsigned int,	opcode		)
 		__field( unsigned int,	data_length	)
 		__field( unsigned int,	task_attribute  )
@@ -146,6 +147,7 @@ TRACE_EVENT(target_sequencer_start,
 
 	TP_fast_assign(
 		__entry->unpacked_lun	= cmd->orig_fe_lun;
+		__entry->tag		= cmd->tag;
 		__entry->opcode		= cmd->t_task_cdb[0];
 		__entry->data_length	= cmd->data_length;
 		__entry->task_attribute	= cmd->sam_task_attr;
@@ -153,9 +155,9 @@ TRACE_EVENT(target_sequencer_start,
 		__assign_str(initiator, cmd->se_sess->se_node_acl->initiatorname);
 	),
 
-	TP_printk("%s -> LUN %03u %s data_length %6u  CDB %s  (TA:%s C:%02x)",
+	TP_printk("%s -> LUN %03u tag %#llx %s data_length %6u  CDB %s  (TA:%s C:%02x)",
 		  __get_str(initiator), __entry->unpacked_lun,
-		  show_opcode_name(__entry->opcode),
+		  __entry->tag, show_opcode_name(__entry->opcode),
 		  __entry->data_length, __print_hex(__entry->cdb, 16),
 		  show_task_attribute_name(__entry->task_attribute),
 		  scsi_command_size(__entry->cdb) <= 16 ?
@@ -172,6 +174,7 @@ TRACE_EVENT(target_cmd_complete,
 
 	TP_STRUCT__entry(
 		__field( unsigned int,	unpacked_lun	)
+		__field( unsigned long long,	tag	)
 		__field( unsigned int,	opcode		)
 		__field( unsigned int,	data_length	)
 		__field( unsigned int,	task_attribute  )
@@ -184,6 +187,7 @@ TRACE_EVENT(target_cmd_complete,
 
 	TP_fast_assign(
 		__entry->unpacked_lun	= cmd->orig_fe_lun;
+		__entry->tag		= cmd->tag;
 		__entry->opcode		= cmd->t_task_cdb[0];
 		__entry->data_length	= cmd->data_length;
 		__entry->task_attribute	= cmd->sam_task_attr;
@@ -195,8 +199,9 @@ TRACE_EVENT(target_cmd_complete,
 		__assign_str(initiator, cmd->se_sess->se_node_acl->initiatorname);
 	),
 
-	TP_printk("%s <- LUN %03u status %s (sense len %d%s%s)  %s data_length %6u  CDB %s  (TA:%s C:%02x)",
+	TP_printk("%s <- LUN %03u tag %#llx status %s (sense len %d%s%s)  %s data_length %6u  CDB %s  (TA:%s C:%02x)",
 		  __get_str(initiator), __entry->unpacked_lun,
+		  __entry->tag,
 		  show_scsi_status_name(__entry->scsi_status),
 		  __entry->sense_length, __entry->sense_length ? " / " : "",
 		  __print_hex(__entry->sense_data, __entry->sense_length),
diff --git a/include/trace/events/vmscan.h b/include/trace/events/vmscan.h
index a5ab297..74bb594 100644
--- a/include/trace/events/vmscan.h
+++ b/include/trace/events/vmscan.h
@@ -323,7 +323,7 @@ TRACE_EVENT(mm_vmscan_writepage,
 	TP_fast_assign(
 		__entry->pfn = page_to_pfn(page);
 		__entry->reclaim_flags = trace_reclaim_flags(
-						page_is_file_cache(page));
+						page_is_file_lru(page));
 	),
 
 	TP_printk("page=%p pfn=%lu flags=%s",
diff --git a/include/trace/events/wbt.h b/include/trace/events/wbt.h
index 37342a1..7848141 100644
--- a/include/trace/events/wbt.h
+++ b/include/trace/events/wbt.h
@@ -46,7 +46,7 @@ TRACE_EVENT(wbt_stat,
 	),
 
 	TP_printk("%s: rmean=%llu, rmin=%llu, rmax=%llu, rsamples=%llu, "
-		  "wmean=%llu, wmin=%llu, wmax=%llu, wsamples=%llu\n",
+		  "wmean=%llu, wmin=%llu, wmax=%llu, wsamples=%llu",
 		  __entry->name, __entry->rmean, __entry->rmin, __entry->rmax,
 		  __entry->rnr_samples, __entry->wmean, __entry->wmin,
 		  __entry->wmax, __entry->wnr_samples)
@@ -73,7 +73,7 @@ TRACE_EVENT(wbt_lat,
 		__entry->lat = div_u64(lat, 1000);
 	),
 
-	TP_printk("%s: latency %lluus\n", __entry->name,
+	TP_printk("%s: latency %lluus", __entry->name,
 			(unsigned long long) __entry->lat)
 );
 
@@ -115,7 +115,7 @@ TRACE_EVENT(wbt_step,
 		__entry->max	= max;
 	),
 
-	TP_printk("%s: %s: step=%d, window=%luus, background=%u, normal=%u, max=%u\n",
+	TP_printk("%s: %s: step=%d, window=%luus, background=%u, normal=%u, max=%u",
 		  __entry->name, __entry->msg, __entry->step, __entry->window,
 		  __entry->bg, __entry->normal, __entry->max)
 );
@@ -148,7 +148,7 @@ TRACE_EVENT(wbt_timer,
 		__entry->inflight	= inflight;
 	),
 
-	TP_printk("%s: status=%u, step=%d, inflight=%u\n", __entry->name,
+	TP_printk("%s: status=%u, step=%d, inflight=%u", __entry->name,
 		  __entry->status, __entry->step, __entry->inflight)
 );
 
diff --git a/include/uapi/linux/btrfs.h b/include/uapi/linux/btrfs.h
index 8134924..e6b6cb0f 100644
--- a/include/uapi/linux/btrfs.h
+++ b/include/uapi/linux/btrfs.h
@@ -36,12 +36,10 @@ struct btrfs_ioctl_vol_args {
 #define BTRFS_DEVICE_PATH_NAME_MAX	1024
 #define BTRFS_SUBVOL_NAME_MAX 		4039
 
-/*
- * Deprecated since 5.7:
- *
- * BTRFS_SUBVOL_CREATE_ASYNC	(1ULL << 0)
- */
-
+#ifndef __KERNEL__
+/* Deprecated since 5.7 */
+# define BTRFS_SUBVOL_CREATE_ASYNC	(1ULL << 0)
+#endif
 #define BTRFS_SUBVOL_RDONLY		(1ULL << 1)
 #define BTRFS_SUBVOL_QGROUP_INHERIT	(1ULL << 2)
 
diff --git a/include/uapi/linux/coresight-stm.h b/include/uapi/linux/coresight-stm.h
index aac550a..8847dbf 100644
--- a/include/uapi/linux/coresight-stm.h
+++ b/include/uapi/linux/coresight-stm.h
@@ -2,8 +2,10 @@
 #ifndef __UAPI_CORESIGHT_STM_H_
 #define __UAPI_CORESIGHT_STM_H_
 
-#define STM_FLAG_TIMESTAMPED   BIT(3)
-#define STM_FLAG_GUARANTEED    BIT(7)
+#include <linux/const.h>
+
+#define STM_FLAG_TIMESTAMPED   _BITUL(3)
+#define STM_FLAG_GUARANTEED    _BITUL(7)
 
 /*
  * The CoreSight STM supports guaranteed and invariant timing
diff --git a/include/uapi/linux/dlm_device.h b/include/uapi/linux/dlm_device.h
index f880d28..e83954c 100644
--- a/include/uapi/linux/dlm_device.h
+++ b/include/uapi/linux/dlm_device.h
@@ -45,13 +45,13 @@ struct dlm_lock_params {
 	void __user *bastaddr;
 	struct dlm_lksb __user *lksb;
 	char lvb[DLM_USER_LVB_LEN];
-	char name[0];
+	char name[];
 };
 
 struct dlm_lspace_params {
 	__u32 flags;
 	__u32 minor;
-	char name[0];
+	char name[];
 };
 
 struct dlm_purge_params {
diff --git a/include/uapi/linux/fanotify.h b/include/uapi/linux/fanotify.h
index b9effa6..a88c7c6 100644
--- a/include/uapi/linux/fanotify.h
+++ b/include/uapi/linux/fanotify.h
@@ -24,10 +24,11 @@
 #define FAN_OPEN_PERM		0x00010000	/* File open in perm check */
 #define FAN_ACCESS_PERM		0x00020000	/* File accessed in perm check */
 #define FAN_OPEN_EXEC_PERM	0x00040000	/* File open/exec in perm check */
+#define FAN_DIR_MODIFY		0x00080000	/* Directory entry was modified */
 
-#define FAN_ONDIR		0x40000000	/* event occurred against dir */
+#define FAN_EVENT_ON_CHILD	0x08000000	/* Interested in child events */
 
-#define FAN_EVENT_ON_CHILD	0x08000000	/* interested in child events */
+#define FAN_ONDIR		0x40000000	/* Event occurred against dir */
 
 /* helper events */
 #define FAN_CLOSE		(FAN_CLOSE_WRITE | FAN_CLOSE_NOWRITE) /* close */
@@ -116,6 +117,7 @@ struct fanotify_event_metadata {
 };
 
 #define FAN_EVENT_INFO_TYPE_FID		1
+#define FAN_EVENT_INFO_TYPE_DFID_NAME	2
 
 /* Variable length info record following event metadata */
 struct fanotify_event_info_header {
@@ -124,7 +126,12 @@ struct fanotify_event_info_header {
 	__u16 len;
 };
 
-/* Unique file identifier info record */
+/*
+ * Unique file identifier info record. This is used both for
+ * FAN_EVENT_INFO_TYPE_FID records and for FAN_EVENT_INFO_TYPE_DFID_NAME
+ * records. For FAN_EVENT_INFO_TYPE_DFID_NAME there is additionally a null
+ * terminated name immediately after the file handle.
+ */
 struct fanotify_event_info_fid {
 	struct fanotify_event_info_header hdr;
 	__kernel_fsid_t fsid;
diff --git a/include/uapi/linux/fiemap.h b/include/uapi/linux/fiemap.h
index 8c0bc24..7a900b23 100644
--- a/include/uapi/linux/fiemap.h
+++ b/include/uapi/linux/fiemap.h
@@ -34,7 +34,7 @@ struct fiemap {
 	__u32 fm_mapped_extents;/* number of extents that were mapped (out) */
 	__u32 fm_extent_count;  /* size of fm_extents array (in) */
 	__u32 fm_reserved;
-	struct fiemap_extent fm_extents[0]; /* array of mapped extents (out) */
+	struct fiemap_extent fm_extents[]; /* array of mapped extents (out) */
 };
 
 #define FIEMAP_MAX_OFFSET	(~0ULL)
diff --git a/include/uapi/linux/gpio.h b/include/uapi/linux/gpio.h
index 799cf823..0206383 100644
--- a/include/uapi/linux/gpio.h
+++ b/include/uapi/linux/gpio.h
@@ -18,7 +18,7 @@
  * struct gpiochip_info - Information about a certain GPIO chip
  * @name: the Linux kernel name of this GPIO chip
  * @label: a functional name for this GPIO chip, such as a product
- * number, may be NULL
+ * number, may be empty
  * @lines: number of GPIO lines on this chip
  */
 struct gpiochip_info {
@@ -44,10 +44,10 @@ struct gpiochip_info {
  * @flags: various flags for this line
  * @name: the name of this GPIO line, such as the output pin of the line on the
  * chip, a rail or a pin header name on a board, as specified by the gpio
- * chip, may be NULL
+ * chip, may be empty
  * @consumer: a functional name for the consumer of this GPIO line as set by
- * whatever is using it, will be NULL if there is no current user but may
- * also be NULL if the consumer doesn't set this up
+ * whatever is using it, will be empty if there is no current user but may
+ * also be empty if the consumer doesn't set this up
  */
 struct gpioline_info {
 	__u32 line_offset;
@@ -59,6 +59,34 @@ struct gpioline_info {
 /* Maximum number of requested handles */
 #define GPIOHANDLES_MAX 64
 
+/* Possible line status change events */
+enum {
+	GPIOLINE_CHANGED_REQUESTED = 1,
+	GPIOLINE_CHANGED_RELEASED,
+	GPIOLINE_CHANGED_CONFIG,
+};
+
+/**
+ * struct gpioline_info_changed - Information about a change in status
+ * of a GPIO line
+ * @info: updated line information
+ * @timestamp: estimate of time of status change occurrence, in nanoseconds
+ * and GPIOLINE_CHANGED_CONFIG
+ * @event_type: one of GPIOLINE_CHANGED_REQUESTED, GPIOLINE_CHANGED_RELEASED
+ *
+ * Note: struct gpioline_info embedded here has 32-bit alignment on its own,
+ * but it works fine with 64-bit alignment too. With its 72 byte size, we can
+ * guarantee there are no implicit holes between it and subsequent members.
+ * The 20-byte padding at the end makes sure we don't add any implicit padding
+ * at the end of the structure on 64-bit architectures.
+ */
+struct gpioline_info_changed {
+	struct gpioline_info info;
+	__u64 timestamp;
+	__u32 event_type;
+	__u32 padding[5]; /* for future use */
+};
+
 /* Linerequest flags */
 #define GPIOHANDLE_REQUEST_INPUT	(1UL << 0)
 #define GPIOHANDLE_REQUEST_OUTPUT	(1UL << 1)
@@ -176,6 +204,8 @@ struct gpioevent_data {
 
 #define GPIO_GET_CHIPINFO_IOCTL _IOR(0xB4, 0x01, struct gpiochip_info)
 #define GPIO_GET_LINEINFO_IOCTL _IOWR(0xB4, 0x02, struct gpioline_info)
+#define GPIO_GET_LINEINFO_WATCH_IOCTL _IOWR(0xB4, 0x0b, struct gpioline_info)
+#define GPIO_GET_LINEINFO_UNWATCH_IOCTL _IOWR(0xB4, 0x0c, __u32)
 #define GPIO_GET_LINEHANDLE_IOCTL _IOWR(0xB4, 0x03, struct gpiohandle_request)
 #define GPIO_GET_LINEEVENT_IOCTL _IOWR(0xB4, 0x04, struct gpioevent_request)
 
diff --git a/include/uapi/linux/idxd.h b/include/uapi/linux/idxd.h
index 849ef15..1f412fb 100644
--- a/include/uapi/linux/idxd.h
+++ b/include/uapi/linux/idxd.h
@@ -83,21 +83,6 @@ enum dsa_completion_status {
 #define DSA_COMP_STATUS_MASK		0x7f
 #define DSA_COMP_STATUS_WRITE		0x80
 
-struct dsa_batch_desc {
-	uint32_t	pasid:20;
-	uint32_t	rsvd:11;
-	uint32_t	priv:1;
-	uint32_t	flags:24;
-	uint32_t	opcode:8;
-	uint64_t	completion_addr;
-	uint64_t	desc_list_addr;
-	uint64_t	rsvd1;
-	uint32_t	desc_count;
-	uint16_t	interrupt_handle;
-	uint16_t	rsvd2;
-	uint8_t		rsvd3[24];
-} __attribute__((packed));
-
 struct dsa_hw_desc {
 	uint32_t	pasid:20;
 	uint32_t	rsvd:11;
@@ -109,6 +94,7 @@ struct dsa_hw_desc {
 		uint64_t	src_addr;
 		uint64_t	rdback_addr;
 		uint64_t	pattern;
+		uint64_t	desc_list_addr;
 	};
 	union {
 		uint64_t	dst_addr;
@@ -116,7 +102,10 @@ struct dsa_hw_desc {
 		uint64_t	src2_addr;
 		uint64_t	comp_pattern;
 	};
-	uint32_t	xfer_size;
+	union {
+		uint32_t	xfer_size;
+		uint32_t	desc_count;
+	};
 	uint16_t	int_handle;
 	uint16_t	rsvd1;
 	union {
diff --git a/include/uapi/linux/input-event-codes.h b/include/uapi/linux/input-event-codes.h
index 6923dc7..b6a835d 100644
--- a/include/uapi/linux/input-event-codes.h
+++ b/include/uapi/linux/input-event-codes.h
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */
 /*
  * Input event codes
  *
diff --git a/include/uapi/linux/netfilter/nf_tables.h b/include/uapi/linux/netfilter/nf_tables.h
index 30f2a87..4565456 100644
--- a/include/uapi/linux/netfilter/nf_tables.h
+++ b/include/uapi/linux/netfilter/nf_tables.h
@@ -276,6 +276,7 @@ enum nft_rule_compat_attributes {
  * @NFT_SET_TIMEOUT: set uses timeouts
  * @NFT_SET_EVAL: set can be updated from the evaluation path
  * @NFT_SET_OBJECT: set contains stateful objects
+ * @NFT_SET_CONCAT: set contains a concatenation
  */
 enum nft_set_flags {
 	NFT_SET_ANONYMOUS		= 0x1,
@@ -285,6 +286,7 @@ enum nft_set_flags {
 	NFT_SET_TIMEOUT			= 0x10,
 	NFT_SET_EVAL			= 0x20,
 	NFT_SET_OBJECT			= 0x40,
+	NFT_SET_CONCAT			= 0x80,
 };
 
 /**
diff --git a/include/uapi/linux/netfilter/xt_IDLETIMER.h b/include/uapi/linux/netfilter/xt_IDLETIMER.h
index 434e650..49ddcdc 100644
--- a/include/uapi/linux/netfilter/xt_IDLETIMER.h
+++ b/include/uapi/linux/netfilter/xt_IDLETIMER.h
@@ -48,6 +48,7 @@ struct idletimer_tg_info_v1 {
 
 	char label[MAX_IDLETIMER_LABEL_SIZE];
 
+	__u8 send_nl_msg;   /* unused: for compatibility with Android */
 	__u8 timer_type;
 
 	/* for kernel module internal use only */
diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
index 5437690..f970141 100644
--- a/include/uapi/linux/pci_regs.h
+++ b/include/uapi/linux/pci_regs.h
@@ -605,6 +605,7 @@
 #define  PCI_EXP_SLTCTL_PWR_OFF        0x0400 /* Power Off */
 #define  PCI_EXP_SLTCTL_EIC	0x0800	/* Electromechanical Interlock Control */
 #define  PCI_EXP_SLTCTL_DLLSCE	0x1000	/* Data Link Layer State Changed Enable */
+#define  PCI_EXP_SLTCTL_IBPD_DISABLE	0x4000 /* In-band PD disable */
 #define PCI_EXP_SLTSTA		26	/* Slot Status */
 #define  PCI_EXP_SLTSTA_ABP	0x0001	/* Attention Button Pressed */
 #define  PCI_EXP_SLTSTA_PFD	0x0002	/* Power Fault Detected */
@@ -680,6 +681,7 @@
 #define PCI_EXP_LNKSTA2		50	/* Link Status 2 */
 #define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2	52	/* v2 endpoints with link end here */
 #define PCI_EXP_SLTCAP2		52	/* Slot Capabilities 2 */
+#define  PCI_EXP_SLTCAP2_IBPD	0x00000001 /* In-band PD Disable Supported */
 #define PCI_EXP_SLTCTL2		56	/* Slot Control 2 */
 #define PCI_EXP_SLTSTA2		58	/* Slot Status 2 */
 
diff --git a/include/uapi/linux/pcitest.h b/include/uapi/linux/pcitest.h
index cbf422e..c3ab4c8 100644
--- a/include/uapi/linux/pcitest.h
+++ b/include/uapi/linux/pcitest.h
@@ -19,5 +19,13 @@
 #define PCITEST_MSIX		_IOW('P', 0x7, int)
 #define PCITEST_SET_IRQTYPE	_IOW('P', 0x8, int)
 #define PCITEST_GET_IRQTYPE	_IO('P', 0x9)
+#define PCITEST_CLEAR_IRQ	_IO('P', 0x10)
+
+#define PCITEST_FLAGS_USE_DMA	0x00000001
+
+struct pci_endpoint_test_xfer_param {
+	unsigned long size;
+	unsigned char flags;
+};
 
 #endif /* __UAPI_LINUX_PCITEST_H */
diff --git a/include/uapi/linux/perf_event.h b/include/uapi/linux/perf_event.h
index 397cfd6..7b2d6fc 100644
--- a/include/uapi/linux/perf_event.h
+++ b/include/uapi/linux/perf_event.h
@@ -142,8 +142,9 @@ enum perf_event_sample_format {
 	PERF_SAMPLE_REGS_INTR			= 1U << 18,
 	PERF_SAMPLE_PHYS_ADDR			= 1U << 19,
 	PERF_SAMPLE_AUX				= 1U << 20,
+	PERF_SAMPLE_CGROUP			= 1U << 21,
 
-	PERF_SAMPLE_MAX = 1U << 21,		/* non-ABI */
+	PERF_SAMPLE_MAX = 1U << 22,		/* non-ABI */
 
 	__PERF_SAMPLE_CALLCHAIN_EARLY		= 1ULL << 63, /* non-ABI; internal use */
 };
@@ -381,7 +382,8 @@ struct perf_event_attr {
 				ksymbol        :  1, /* include ksymbol events */
 				bpf_event      :  1, /* include bpf events */
 				aux_output     :  1, /* generate AUX records instead of events */
-				__reserved_1   : 32;
+				cgroup         :  1, /* include cgroup events */
+				__reserved_1   : 31;
 
 	union {
 		__u32		wakeup_events;	  /* wakeup every n events */
@@ -1012,6 +1014,16 @@ enum perf_event_type {
 	 */
 	PERF_RECORD_BPF_EVENT			= 18,
 
+	/*
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *	u64				id;
+	 *	char				path[];
+	 *	struct sample_id		sample_id;
+	 * };
+	 */
+	PERF_RECORD_CGROUP			= 19,
+
 	PERF_RECORD_MAX,			/* non-ABI */
 };
 
diff --git a/include/uapi/linux/rtc.h b/include/uapi/linux/rtc.h
index 095af36..83bba58 100644
--- a/include/uapi/linux/rtc.h
+++ b/include/uapi/linux/rtc.h
@@ -12,6 +12,9 @@
 #ifndef _UAPI_LINUX_RTC_H_
 #define _UAPI_LINUX_RTC_H_
 
+#include <linux/const.h>
+#include <linux/ioctl.h>
+
 /*
  * The struct used to pass data via the following ioctl. Similar to the
  * struct tm in <time.h>, but it needs to be here so that the kernel
@@ -92,10 +95,10 @@ struct rtc_pll_info {
 #define RTC_PLL_GET	_IOR('p', 0x11, struct rtc_pll_info)  /* Get PLL correction */
 #define RTC_PLL_SET	_IOW('p', 0x12, struct rtc_pll_info)  /* Set PLL correction */
 
-#define RTC_VL_DATA_INVALID	BIT(0) /* Voltage too low, RTC data is invalid */
-#define RTC_VL_BACKUP_LOW	BIT(1) /* Backup voltage is low */
-#define RTC_VL_BACKUP_EMPTY	BIT(2) /* Backup empty or not present */
-#define RTC_VL_ACCURACY_LOW	BIT(3) /* Voltage is low, RTC accuracy is reduced */
+#define RTC_VL_DATA_INVALID	_BITUL(0) /* Voltage too low, RTC data is invalid */
+#define RTC_VL_BACKUP_LOW	_BITUL(1) /* Backup voltage is low */
+#define RTC_VL_BACKUP_EMPTY	_BITUL(2) /* Backup empty or not present */
+#define RTC_VL_ACCURACY_LOW	_BITUL(3) /* Voltage is low, RTC accuracy is reduced */
 
 #define RTC_VL_READ	_IOR('p', 0x13, unsigned int)	/* Voltage low detection */
 #define RTC_VL_CLR	_IO('p', 0x14)		/* Clear voltage low information */
diff --git a/include/uapi/linux/sched.h b/include/uapi/linux/sched.h
index 2e3bc22..3bac0a8 100644
--- a/include/uapi/linux/sched.h
+++ b/include/uapi/linux/sched.h
@@ -35,6 +35,7 @@
 
 /* Flags for the clone3() syscall. */
 #define CLONE_CLEAR_SIGHAND 0x100000000ULL /* Clear any signal handler and reset to SIG_DFL. */
+#define CLONE_INTO_CGROUP 0x200000000ULL /* Clone into a specific cgroup given the right permissions. */
 
 /*
  * cloning flags intersect with CSIGNAL so can be used with unshare and clone3
@@ -81,6 +82,8 @@
  * @set_tid_size: This defines the size of the array referenced
  *                in @set_tid. This cannot be larger than the
  *                kernel's limit of nested PID namespaces.
+ * @cgroup:       If CLONE_INTO_CGROUP is specified set this to
+ *                a file descriptor for the cgroup.
  *
  * The structure is versioned by size and thus extensible.
  * New struct members must go at the end of the struct and
@@ -97,11 +100,13 @@ struct clone_args {
 	__aligned_u64 tls;
 	__aligned_u64 set_tid;
 	__aligned_u64 set_tid_size;
+	__aligned_u64 cgroup;
 };
 #endif
 
 #define CLONE_ARGS_SIZE_VER0 64 /* sizeof first published struct */
 #define CLONE_ARGS_SIZE_VER1 80 /* sizeof second published struct */
+#define CLONE_ARGS_SIZE_VER2 88 /* sizeof third published struct */
 
 /*
  * Scheduling policies
diff --git a/include/uapi/linux/um_timetravel.h b/include/uapi/linux/um_timetravel.h
new file mode 100644
index 0000000..ca32382
--- /dev/null
+++ b/include/uapi/linux/um_timetravel.h
@@ -0,0 +1,128 @@
+/*
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ * Copyright (C) 2019 Intel Corporation
+ */
+#ifndef _UAPI_LINUX_UM_TIMETRAVEL_H
+#define _UAPI_LINUX_UM_TIMETRAVEL_H
+#include <linux/types.h>
+
+/**
+ * struct um_timetravel_msg - UM time travel message
+ *
+ * This is the basic message type, going in both directions.
+ *
+ * This is the message passed between the host (user-mode Linux instance)
+ * and the calendar (the application on the other side of the socket) in
+ * order to implement common scheduling.
+ *
+ * Whenever UML has an event it will request runtime for it from the
+ * calendar, and then wait for its turn until it can run, etc. Note
+ * that it will only ever request the single next runtime, i.e. multiple
+ * REQUEST messages override each other.
+ */
+struct um_timetravel_msg {
+	/**
+	 * @op: operation value from &enum um_timetravel_ops
+	 */
+	__u32 op;
+
+	/**
+	 * @seq: sequence number for the message - shall be reflected in
+	 *	the ACK response, and should be checked while processing
+	 *	the response to see if it matches
+	 */
+	__u32 seq;
+
+	/**
+	 * @time: time in nanoseconds
+	 */
+	__u64 time;
+};
+
+/**
+ * enum um_timetravel_ops - Operation codes
+ */
+enum um_timetravel_ops {
+	/**
+	 * @UM_TIMETRAVEL_ACK: response (ACK) to any previous message,
+	 *	this usually doesn't carry any data in the 'time' field
+	 *	unless otherwise specified below
+	 */
+	UM_TIMETRAVEL_ACK		= 0,
+
+	/**
+	 * @UM_TIMETRAVEL_START: initialize the connection, the time
+	 *	field contains an (arbitrary) ID to possibly be able
+	 *	to distinguish the connections.
+	 */
+	UM_TIMETRAVEL_START		= 1,
+
+	/**
+	 * @UM_TIMETRAVEL_REQUEST: request to run at the given time
+	 *	(host -> calendar)
+	 */
+	UM_TIMETRAVEL_REQUEST		= 2,
+
+	/**
+	 * @UM_TIMETRAVEL_WAIT: Indicate waiting for the previously requested
+	 *	runtime, new requests may be made while waiting (e.g. due to
+	 *	interrupts); the time field is ignored. The calendar must process
+	 *	this message and later	send a %UM_TIMETRAVEL_RUN message when
+	 *	the host can run again.
+	 *	(host -> calendar)
+	 */
+	UM_TIMETRAVEL_WAIT		= 3,
+
+	/**
+	 * @UM_TIMETRAVEL_GET: return the current time from the calendar in the
+	 *	ACK message, the time in the request message is ignored
+	 *	(host -> calendar)
+	 */
+	UM_TIMETRAVEL_GET		= 4,
+
+	/**
+	 * @UM_TIMETRAVEL_UPDATE: time update to the calendar, must be sent e.g.
+	 *	before kicking an interrupt to another calendar
+	 *	(host -> calendar)
+	 */
+	UM_TIMETRAVEL_UPDATE		= 5,
+
+	/**
+	 * @UM_TIMETRAVEL_RUN: run time request granted, current time is in
+	 *	the time field
+	 *	(calendar -> host)
+	 */
+	UM_TIMETRAVEL_RUN		= 6,
+
+	/**
+	 * @UM_TIMETRAVEL_FREE_UNTIL: Enable free-running until the given time,
+	 *	this is a message from the calendar telling the host that it can
+	 *	freely do its own scheduling for anything before the indicated
+	 *	time.
+	 *	Note that if a calendar sends this message once, the host may
+	 *	assume that it will also do so in the future, if it implements
+	 *	wraparound semantics for the time field.
+	 *	(calendar -> host)
+	 */
+	UM_TIMETRAVEL_FREE_UNTIL	= 7,
+
+	/**
+	 * @UM_TIMETRAVEL_GET_TOD: Return time of day, typically used once at
+	 *	boot by the virtual machines to get a synchronized time from
+	 *	the simulation.
+	 */
+	UM_TIMETRAVEL_GET_TOD		= 8,
+};
+
+#endif /* _UAPI_LINUX_UM_TIMETRAVEL_H */
diff --git a/include/uapi/linux/userfaultfd.h b/include/uapi/linux/userfaultfd.h
index 48f1a7c..e7e98bd 100644
--- a/include/uapi/linux/userfaultfd.h
+++ b/include/uapi/linux/userfaultfd.h
@@ -19,7 +19,8 @@
  * means the userland is reading).
  */
 #define UFFD_API ((__u64)0xAA)
-#define UFFD_API_FEATURES (UFFD_FEATURE_EVENT_FORK |		\
+#define UFFD_API_FEATURES (UFFD_FEATURE_PAGEFAULT_FLAG_WP |	\
+			   UFFD_FEATURE_EVENT_FORK |		\
 			   UFFD_FEATURE_EVENT_REMAP |		\
 			   UFFD_FEATURE_EVENT_REMOVE |	\
 			   UFFD_FEATURE_EVENT_UNMAP |		\
@@ -34,7 +35,8 @@
 #define UFFD_API_RANGE_IOCTLS			\
 	((__u64)1 << _UFFDIO_WAKE |		\
 	 (__u64)1 << _UFFDIO_COPY |		\
-	 (__u64)1 << _UFFDIO_ZEROPAGE)
+	 (__u64)1 << _UFFDIO_ZEROPAGE |		\
+	 (__u64)1 << _UFFDIO_WRITEPROTECT)
 #define UFFD_API_RANGE_IOCTLS_BASIC		\
 	((__u64)1 << _UFFDIO_WAKE |		\
 	 (__u64)1 << _UFFDIO_COPY)
@@ -52,6 +54,7 @@
 #define _UFFDIO_WAKE			(0x02)
 #define _UFFDIO_COPY			(0x03)
 #define _UFFDIO_ZEROPAGE		(0x04)
+#define _UFFDIO_WRITEPROTECT		(0x06)
 #define _UFFDIO_API			(0x3F)
 
 /* userfaultfd ioctl ids */
@@ -68,6 +71,8 @@
 				      struct uffdio_copy)
 #define UFFDIO_ZEROPAGE		_IOWR(UFFDIO, _UFFDIO_ZEROPAGE,	\
 				      struct uffdio_zeropage)
+#define UFFDIO_WRITEPROTECT	_IOWR(UFFDIO, _UFFDIO_WRITEPROTECT, \
+				      struct uffdio_writeprotect)
 
 /* read() structure */
 struct uffd_msg {
@@ -203,13 +208,14 @@ struct uffdio_copy {
 	__u64 dst;
 	__u64 src;
 	__u64 len;
-	/*
-	 * There will be a wrprotection flag later that allows to map
-	 * pages wrprotected on the fly. And such a flag will be
-	 * available if the wrprotection ioctl are implemented for the
-	 * range according to the uffdio_register.ioctls.
-	 */
 #define UFFDIO_COPY_MODE_DONTWAKE		((__u64)1<<0)
+	/*
+	 * UFFDIO_COPY_MODE_WP will map the page write protected on
+	 * the fly.  UFFDIO_COPY_MODE_WP is available only if the
+	 * write protected ioctl is implemented for the range
+	 * according to the uffdio_register.ioctls.
+	 */
+#define UFFDIO_COPY_MODE_WP			((__u64)1<<1)
 	__u64 mode;
 
 	/*
@@ -231,4 +237,24 @@ struct uffdio_zeropage {
 	__s64 zeropage;
 };
 
+struct uffdio_writeprotect {
+	struct uffdio_range range;
+/*
+ * UFFDIO_WRITEPROTECT_MODE_WP: set the flag to write protect a range,
+ * unset the flag to undo protection of a range which was previously
+ * write protected.
+ *
+ * UFFDIO_WRITEPROTECT_MODE_DONTWAKE: set the flag to avoid waking up
+ * any wait thread after the operation succeeds.
+ *
+ * NOTE: Write protecting a region (WP=1) is unrelated to page faults,
+ * therefore DONTWAKE flag is meaningless with WP=1.  Removing write
+ * protection (WP=0) in response to a page fault wakes the faulting
+ * task unless DONTWAKE is set.
+ */
+#define UFFDIO_WRITEPROTECT_MODE_WP		((__u64)1<<0)
+#define UFFDIO_WRITEPROTECT_MODE_DONTWAKE	((__u64)1<<1)
+	__u64 mode;
+};
+
 #endif /* _LINUX_USERFAULTFD_H */
diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h
index 9e843a1..015516b 100644
--- a/include/uapi/linux/vfio.h
+++ b/include/uapi/linux/vfio.h
@@ -707,6 +707,43 @@ struct vfio_device_ioeventfd {
 
 #define VFIO_DEVICE_IOEVENTFD		_IO(VFIO_TYPE, VFIO_BASE + 16)
 
+/**
+ * VFIO_DEVICE_FEATURE - _IORW(VFIO_TYPE, VFIO_BASE + 17,
+ *			       struct vfio_device_feature)
+ *
+ * Get, set, or probe feature data of the device.  The feature is selected
+ * using the FEATURE_MASK portion of the flags field.  Support for a feature
+ * can be probed by setting both the FEATURE_MASK and PROBE bits.  A probe
+ * may optionally include the GET and/or SET bits to determine read vs write
+ * access of the feature respectively.  Probing a feature will return success
+ * if the feature is supported and all of the optionally indicated GET/SET
+ * methods are supported.  The format of the data portion of the structure is
+ * specific to the given feature.  The data portion is not required for
+ * probing.  GET and SET are mutually exclusive, except for use with PROBE.
+ *
+ * Return 0 on success, -errno on failure.
+ */
+struct vfio_device_feature {
+	__u32	argsz;
+	__u32	flags;
+#define VFIO_DEVICE_FEATURE_MASK	(0xffff) /* 16-bit feature index */
+#define VFIO_DEVICE_FEATURE_GET		(1 << 16) /* Get feature into data[] */
+#define VFIO_DEVICE_FEATURE_SET		(1 << 17) /* Set feature from data[] */
+#define VFIO_DEVICE_FEATURE_PROBE	(1 << 18) /* Probe feature support */
+	__u8	data[];
+};
+
+#define VFIO_DEVICE_FEATURE		_IO(VFIO_TYPE, VFIO_BASE + 17)
+
+/*
+ * Provide support for setting a PCI VF Token, which is used as a shared
+ * secret between PF and VF drivers.  This feature may only be set on a
+ * PCI SR-IOV PF when SR-IOV is enabled on the PF and there are no existing
+ * open VFs.  Data provided when setting this feature is a 16-byte array
+ * (__u8 b[16]), representing a UUID.
+ */
+#define VFIO_DEVICE_FEATURE_PCI_VF_TOKEN	(0)
+
 /* -------- API for Type1 VFIO IOMMU -------- */
 
 /**
diff --git a/include/uapi/linux/vhost.h b/include/uapi/linux/vhost.h
index 40d028e..9fe72e4 100644
--- a/include/uapi/linux/vhost.h
+++ b/include/uapi/linux/vhost.h
@@ -116,4 +116,28 @@
 #define VHOST_VSOCK_SET_GUEST_CID	_IOW(VHOST_VIRTIO, 0x60, __u64)
 #define VHOST_VSOCK_SET_RUNNING		_IOW(VHOST_VIRTIO, 0x61, int)
 
+/* VHOST_VDPA specific defines */
+
+/* Get the device id. The device ids follow the same definition of
+ * the device id defined in virtio-spec.
+ */
+#define VHOST_VDPA_GET_DEVICE_ID	_IOR(VHOST_VIRTIO, 0x70, __u32)
+/* Get and set the status. The status bits follow the same definition
+ * of the device status defined in virtio-spec.
+ */
+#define VHOST_VDPA_GET_STATUS		_IOR(VHOST_VIRTIO, 0x71, __u8)
+#define VHOST_VDPA_SET_STATUS		_IOW(VHOST_VIRTIO, 0x72, __u8)
+/* Get and set the device config. The device config follows the same
+ * definition of the device config defined in virtio-spec.
+ */
+#define VHOST_VDPA_GET_CONFIG		_IOR(VHOST_VIRTIO, 0x73, \
+					     struct vhost_vdpa_config)
+#define VHOST_VDPA_SET_CONFIG		_IOW(VHOST_VIRTIO, 0x74, \
+					     struct vhost_vdpa_config)
+/* Enable/disable the ring. */
+#define VHOST_VDPA_SET_VRING_ENABLE	_IOW(VHOST_VIRTIO, 0x75, \
+					     struct vhost_vring_state)
+/* Get the max ring size. */
+#define VHOST_VDPA_GET_VRING_NUM	_IOR(VHOST_VIRTIO, 0x76, __u16)
+
 #endif
diff --git a/include/uapi/linux/vhost_types.h b/include/uapi/linux/vhost_types.h
index c907290..669457c 100644
--- a/include/uapi/linux/vhost_types.h
+++ b/include/uapi/linux/vhost_types.h
@@ -119,6 +119,14 @@ struct vhost_scsi_target {
 	unsigned short reserved;
 };
 
+/* VHOST_VDPA specific definitions */
+
+struct vhost_vdpa_config {
+	__u32 off;
+	__u32 len;
+	__u8 buf[0];
+};
+
 /* Feature bits */
 /* Log all write descriptors. Can be changed while device is active. */
 #define VHOST_F_LOG_ALL 26
diff --git a/include/uapi/linux/virtio_balloon.h b/include/uapi/linux/virtio_balloon.h
index a1966cd7..1997439 100644
--- a/include/uapi/linux/virtio_balloon.h
+++ b/include/uapi/linux/virtio_balloon.h
@@ -36,6 +36,7 @@
 #define VIRTIO_BALLOON_F_DEFLATE_ON_OOM	2 /* Deflate balloon on OOM */
 #define VIRTIO_BALLOON_F_FREE_PAGE_HINT	3 /* VQ to report free pages */
 #define VIRTIO_BALLOON_F_PAGE_POISON	4 /* Guest is using page poisoning */
+#define VIRTIO_BALLOON_F_REPORTING	5 /* Page reporting virtqueue */
 
 /* Size of a PFN in the balloon interface. */
 #define VIRTIO_BALLOON_PFN_SHIFT 12
diff --git a/include/uapi/linux/virtio_iommu.h b/include/uapi/linux/virtio_iommu.h
index 237e36a..48e3c29 100644
--- a/include/uapi/linux/virtio_iommu.h
+++ b/include/uapi/linux/virtio_iommu.h
@@ -18,24 +18,24 @@
 #define VIRTIO_IOMMU_F_MMIO			5
 
 struct virtio_iommu_range_64 {
-	__le64					start;
-	__le64					end;
+	__u64					start;
+	__u64					end;
 };
 
 struct virtio_iommu_range_32 {
-	__le32					start;
-	__le32					end;
+	__u32					start;
+	__u32					end;
 };
 
 struct virtio_iommu_config {
 	/* Supported page sizes */
-	__le64					page_size_mask;
+	__u64					page_size_mask;
 	/* Supported IOVA range */
 	struct virtio_iommu_range_64		input_range;
 	/* Max domain ID size */
 	struct virtio_iommu_range_32		domain_range;
 	/* Probe buffer size */
-	__le32					probe_size;
+	__u32					probe_size;
 };
 
 /* Request types */
diff --git a/include/uapi/linux/virtio_net.h b/include/uapi/linux/virtio_net.h
index a3715a3..19d23e5 100644
--- a/include/uapi/linux/virtio_net.h
+++ b/include/uapi/linux/virtio_net.h
@@ -57,6 +57,9 @@
 					 * Steering */
 #define VIRTIO_NET_F_CTRL_MAC_ADDR 23	/* Set MAC address */
 
+#define VIRTIO_NET_F_HASH_REPORT  57	/* Supports hash report */
+#define VIRTIO_NET_F_RSS	  60	/* Supports RSS RX steering */
+#define VIRTIO_NET_F_RSC_EXT	  61	/* extended coalescing info */
 #define VIRTIO_NET_F_STANDBY	  62	/* Act as standby for another device
 					 * with the same MAC.
 					 */
@@ -69,6 +72,17 @@
 #define VIRTIO_NET_S_LINK_UP	1	/* Link is up */
 #define VIRTIO_NET_S_ANNOUNCE	2	/* Announcement is needed */
 
+/* supported/enabled hash types */
+#define VIRTIO_NET_RSS_HASH_TYPE_IPv4          (1 << 0)
+#define VIRTIO_NET_RSS_HASH_TYPE_TCPv4         (1 << 1)
+#define VIRTIO_NET_RSS_HASH_TYPE_UDPv4         (1 << 2)
+#define VIRTIO_NET_RSS_HASH_TYPE_IPv6          (1 << 3)
+#define VIRTIO_NET_RSS_HASH_TYPE_TCPv6         (1 << 4)
+#define VIRTIO_NET_RSS_HASH_TYPE_UDPv6         (1 << 5)
+#define VIRTIO_NET_RSS_HASH_TYPE_IP_EX         (1 << 6)
+#define VIRTIO_NET_RSS_HASH_TYPE_TCP_EX        (1 << 7)
+#define VIRTIO_NET_RSS_HASH_TYPE_UDP_EX        (1 << 8)
+
 struct virtio_net_config {
 	/* The config defining mac address (if VIRTIO_NET_F_MAC) */
 	__u8 mac[ETH_ALEN];
@@ -92,6 +106,12 @@ struct virtio_net_config {
 	 * Any other value stands for unknown.
 	 */
 	__u8 duplex;
+	/* maximum size of RSS key */
+	__u8 rss_max_key_size;
+	/* maximum number of indirection table entries */
+	__le16 rss_max_indirection_table_length;
+	/* bitmask of supported VIRTIO_NET_RSS_HASH_ types */
+	__le32 supported_hash_types;
 } __attribute__((packed));
 
 /*
@@ -104,6 +124,7 @@ struct virtio_net_config {
 struct virtio_net_hdr_v1 {
 #define VIRTIO_NET_HDR_F_NEEDS_CSUM	1	/* Use csum_start, csum_offset */
 #define VIRTIO_NET_HDR_F_DATA_VALID	2	/* Csum is valid */
+#define VIRTIO_NET_HDR_F_RSC_INFO	4	/* rsc info in csum_ fields */
 	__u8 flags;
 #define VIRTIO_NET_HDR_GSO_NONE		0	/* Not a GSO frame */
 #define VIRTIO_NET_HDR_GSO_TCPV4	1	/* GSO frame, IPv4 TCP (TSO) */
@@ -113,11 +134,46 @@ struct virtio_net_hdr_v1 {
 	__u8 gso_type;
 	__virtio16 hdr_len;	/* Ethernet + IP + tcp/udp hdrs */
 	__virtio16 gso_size;	/* Bytes to append to hdr_len per frame */
-	__virtio16 csum_start;	/* Position to start checksumming from */
-	__virtio16 csum_offset;	/* Offset after that to place checksum */
+	union {
+		struct {
+			__virtio16 csum_start;
+			__virtio16 csum_offset;
+		};
+		/* Checksum calculation */
+		struct {
+			/* Position to start checksumming from */
+			__virtio16 start;
+			/* Offset after that to place checksum */
+			__virtio16 offset;
+		} csum;
+		/* Receive Segment Coalescing */
+		struct {
+			/* Number of coalesced segments */
+			__le16 segments;
+			/* Number of duplicated acks */
+			__le16 dup_acks;
+		} rsc;
+	};
 	__virtio16 num_buffers;	/* Number of merged rx buffers */
 };
 
+struct virtio_net_hdr_v1_hash {
+	struct virtio_net_hdr_v1 hdr;
+	__le32 hash_value;
+#define VIRTIO_NET_HASH_REPORT_NONE            0
+#define VIRTIO_NET_HASH_REPORT_IPv4            1
+#define VIRTIO_NET_HASH_REPORT_TCPv4           2
+#define VIRTIO_NET_HASH_REPORT_UDPv4           3
+#define VIRTIO_NET_HASH_REPORT_IPv6            4
+#define VIRTIO_NET_HASH_REPORT_TCPv6           5
+#define VIRTIO_NET_HASH_REPORT_UDPv6           6
+#define VIRTIO_NET_HASH_REPORT_IPv6_EX         7
+#define VIRTIO_NET_HASH_REPORT_TCPv6_EX        8
+#define VIRTIO_NET_HASH_REPORT_UDPv6_EX        9
+	__le16 hash_report;
+	__le16 padding;
+};
+
 #ifndef VIRTIO_NET_NO_LEGACY
 /* This header comes first in the scatter-gather list.
  * For legacy virtio, if VIRTIO_F_ANY_LAYOUT is not negotiated, it must
@@ -228,7 +284,9 @@ struct virtio_net_ctrl_mac {
 
 /*
  * Control Receive Flow Steering
- *
+ */
+#define VIRTIO_NET_CTRL_MQ   4
+/*
  * The command VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET
  * enables Receive Flow Steering, specifying the number of the transmit and
  * receive queues that will be used. After the command is consumed and acked by
@@ -241,12 +299,48 @@ struct virtio_net_ctrl_mq {
 	__virtio16 virtqueue_pairs;
 };
 
-#define VIRTIO_NET_CTRL_MQ   4
  #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET        0
  #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MIN        1
  #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX        0x8000
 
 /*
+ * The command VIRTIO_NET_CTRL_MQ_RSS_CONFIG has the same effect as
+ * VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET does and additionally configures
+ * the receive steering to use a hash calculated for incoming packet
+ * to decide on receive virtqueue to place the packet. The command
+ * also provides parameters to calculate a hash and receive virtqueue.
+ */
+struct virtio_net_rss_config {
+	__le32 hash_types;
+	__le16 indirection_table_mask;
+	__le16 unclassified_queue;
+	__le16 indirection_table[1/* + indirection_table_mask */];
+	__le16 max_tx_vq;
+	__u8 hash_key_length;
+	__u8 hash_key_data[/* hash_key_length */];
+};
+
+ #define VIRTIO_NET_CTRL_MQ_RSS_CONFIG          1
+
+/*
+ * The command VIRTIO_NET_CTRL_MQ_HASH_CONFIG requests the device
+ * to include in the virtio header of the packet the value of the
+ * calculated hash and the report type of hash. It also provides
+ * parameters for hash calculation. The command requires feature
+ * VIRTIO_NET_F_HASH_REPORT to be negotiated to extend the
+ * layout of virtio header as defined in virtio_net_hdr_v1_hash.
+ */
+struct virtio_net_hash_config {
+	__le32 hash_types;
+	/* for compatibility with virtio_net_rss_config */
+	__le16 reserved[4];
+	__u8 hash_key_length;
+	__u8 hash_key_data[/* hash_key_length */];
+};
+
+ #define VIRTIO_NET_CTRL_MQ_HASH_CONFIG         2
+
+/*
  * Control network offloads
  *
  * Reconfigures the network offloads that Guest can handle.
diff --git a/include/uapi/scsi/fc/fc_els.h b/include/uapi/scsi/fc/fc_els.h
index 76f627f..66318c4 100644
--- a/include/uapi/scsi/fc/fc_els.h
+++ b/include/uapi/scsi/fc/fc_els.h
@@ -9,6 +9,7 @@
 #define	_FC_ELS_H_
 
 #include <linux/types.h>
+#include <asm/byteorder.h>
 
 /*
  * Fibre Channel Switch - Enhanced Link Services definitions.
@@ -40,6 +41,7 @@ enum fc_els_cmd {
 	ELS_REC =	0x13,	/* read exchange concise */
 	ELS_SRR =	0x14,	/* sequence retransmission request */
 	ELS_FPIN =	0x16,	/* Fabric Performance Impact Notification */
+	ELS_RDF =	0x19,	/* Register Diagnostic Functions */
 	ELS_PRLI =	0x20,	/* process login */
 	ELS_PRLO =	0x21,	/* process logout */
 	ELS_SCN =	0x22,	/* state change notification */
@@ -108,6 +110,7 @@ enum fc_els_cmd {
 	[ELS_REC] =	"REC",			\
 	[ELS_SRR] =	"SRR",			\
 	[ELS_FPIN] =	"FPIN",			\
+	[ELS_RDF] =	"RDF",			\
 	[ELS_PRLI] =	"PRLI",			\
 	[ELS_PRLO] =	"PRLO",			\
 	[ELS_SCN] =	"SCN",			\
@@ -208,6 +211,99 @@ enum fc_els_rjt_explan {
 };
 
 /*
+ * Link Service TLV Descriptor Tag Values
+ */
+enum fc_ls_tlv_dtag {
+	ELS_DTAG_LS_REQ_INFO =		0x00000001,
+		/* Link Service Request Information Descriptor */
+	ELS_DTAG_LNK_INTEGRITY =	0x00020001,
+		/* Link Integrity Notification Descriptor */
+	ELS_DTAG_DELIVERY =		0x00020002,
+		/* Delivery Notification Descriptor */
+	ELS_DTAG_PEER_CONGEST =		0x00020003,
+		/* Peer Congestion Notification Descriptor */
+	ELS_DTAG_CONGESTION =		0x00020004,
+		/* Congestion Notification Descriptor */
+	ELS_DTAG_FPIN_REGISTER =	0x00030001,
+		/* FPIN Registration Descriptor */
+};
+
+/*
+ * Initializer useful for decoding table.
+ * Please keep this in sync with the above definitions.
+ */
+#define FC_LS_TLV_DTAG_INIT {					      \
+	{ ELS_DTAG_LS_REQ_INFO,		"Link Service Request Information" }, \
+	{ ELS_DTAG_LNK_INTEGRITY,	"Link Integrity Notification" },      \
+	{ ELS_DTAG_DELIVERY,		"Delivery Notification Present" },    \
+	{ ELS_DTAG_PEER_CONGEST,	"Peer Congestion Notification" },     \
+	{ ELS_DTAG_CONGESTION,		"Congestion Notification" },	      \
+	{ ELS_DTAG_FPIN_REGISTER,	"FPIN Registration" },		      \
+}
+
+
+/*
+ * Generic Link Service TLV Descriptor format
+ *
+ * This structure, as it defines no payload, will also be referred to
+ * as the "tlv header" - which contains the tag and len fields.
+ */
+struct fc_tlv_desc {
+	__be32		desc_tag;	/* Notification Descriptor Tag */
+	__be32		desc_len;	/* Length of Descriptor (in bytes).
+					 * Size of descriptor excluding
+					 * desc_tag and desc_len fields.
+					 */
+	__u8		desc_value[0];  /* Descriptor Value */
+};
+
+/* Descriptor tag and len fields are considered the mandatory header
+ * for a descriptor
+ */
+#define FC_TLV_DESC_HDR_SZ	sizeof(struct fc_tlv_desc)
+
+/*
+ * Macro, used when initializing payloads, to return the descriptor length.
+ * Length is size of descriptor minus the tag and len fields.
+ */
+#define FC_TLV_DESC_LENGTH_FROM_SZ(desc)	\
+		(sizeof(desc) - FC_TLV_DESC_HDR_SZ)
+
+/* Macro, used on received payloads, to return the descriptor length */
+#define FC_TLV_DESC_SZ_FROM_LENGTH(tlv)		\
+		(__be32_to_cpu((tlv)->desc_len) + FC_TLV_DESC_HDR_SZ)
+
+/*
+ * This helper is used to walk descriptors in a descriptor list.
+ * Given the address of the current descriptor, which minimally contains a
+ * tag and len field, calculate the address of the next descriptor based
+ * on the len field.
+ */
+static inline void *fc_tlv_next_desc(void *desc)
+{
+	struct fc_tlv_desc *tlv = desc;
+
+	return (desc + FC_TLV_DESC_SZ_FROM_LENGTH(tlv));
+}
+
+
+/*
+ * Link Service Request Information Descriptor
+ */
+struct fc_els_lsri_desc {
+	__be32		desc_tag;	/* descriptor tag (0x0000 0001) */
+	__be32		desc_len;	/* Length of Descriptor (in bytes) (4).
+					 * Size of descriptor excluding
+					 * desc_tag and desc_len fields.
+					 */
+	struct {
+		__u8	cmd;		/* ELS cmd byte */
+		__u8	bytes[3];	/* bytes 1..3 */
+	} rqst_w0;			/* Request word 0 */
+};
+
+
+/*
  * Common service parameters (N ports).
  */
 struct fc_els_csp {
@@ -819,24 +915,61 @@ enum fc_els_clid_ic {
 };
 
 
-/*
- * Fabric Notification Descriptor Tag values
- */
-enum fc_fn_dtag {
-	ELS_FN_DTAG_LNK_INTEGRITY =	0x00020001,	/* Link Integrity */
-	ELS_FN_DTAG_PEER_CONGEST =	0x00020003,	/* Peer Congestion */
-	ELS_FN_DTAG_CONGESTION =	0x00020004,	/* Congestion */
+enum fc_fpin_li_event_types {
+	FPIN_LI_UNKNOWN =		0x0,
+	FPIN_LI_LINK_FAILURE =		0x1,
+	FPIN_LI_LOSS_OF_SYNC =		0x2,
+	FPIN_LI_LOSS_OF_SIG =		0x3,
+	FPIN_LI_PRIM_SEQ_ERR =		0x4,
+	FPIN_LI_INVALID_TX_WD =		0x5,
+	FPIN_LI_INVALID_CRC =		0x6,
+	FPIN_LI_DEVICE_SPEC =		0xF,
 };
 
 /*
- * Fabric Notification Descriptor
+ * Initializer useful for decoding table.
+ * Please keep this in sync with the above definitions.
  */
-struct fc_fn_desc {
-	__be32		fn_desc_tag;	/* Notification Descriptor Tag */
-	__be32		fn_desc_value_len; /* Length of Descriptor Value field
-					    * (in bytes)
-					    */
-	__u8		fn_desc_value[0];  /* Descriptor Value */
+#define FC_FPIN_LI_EVT_TYPES_INIT {					\
+	{ FPIN_LI_UNKNOWN,		"Unknown" },			\
+	{ FPIN_LI_LINK_FAILURE,		"Link Failure" },		\
+	{ FPIN_LI_LOSS_OF_SYNC,		"Loss of Synchronization" },	\
+	{ FPIN_LI_LOSS_OF_SIG,		"Loss of Signal" },		\
+	{ FPIN_LI_PRIM_SEQ_ERR,		"Primitive Sequence Protocol Error" }, \
+	{ FPIN_LI_INVALID_TX_WD,	"Invalid Transmission Word" },	\
+	{ FPIN_LI_INVALID_CRC,		"Invalid CRC" },		\
+	{ FPIN_LI_DEVICE_SPEC,		"Device Specific" },		\
+}
+
+
+/*
+ * Link Integrity Notification Descriptor
+ */
+struct fc_fn_li_desc {
+	__be32		desc_tag;	/* Descriptor Tag (0x00020001) */
+	__be32		desc_len;	/* Length of Descriptor (in bytes).
+					 * Size of descriptor excluding
+					 * desc_tag and desc_len fields.
+					 */
+	__be64		detecting_wwpn;	/* Port Name that detected event */
+	__be64		attached_wwpn;	/* Port Name of device attached to
+					 * detecting Port Name
+					 */
+	__be16		event_type;	/* see enum fc_fpin_li_event_types */
+	__be16		event_modifier;	/* Implementation specific value
+					 * describing the event type
+					 */
+	__be32		event_threshold;/* duration in ms of the link
+					 * integrity detection cycle
+					 */
+	__be32		event_count;	/* minimum number of event
+					 * occurrences during the event
+					 * threshold to caause the LI event
+					 */
+	__be32		pname_count;	/* number of portname_list elements */
+	__be64		pname_list[0];	/* list of N_Port_Names accessible
+					 * through the attached port
+					 */
 };
 
 /*
@@ -845,8 +978,56 @@ struct fc_fn_desc {
 struct fc_els_fpin {
 	__u8		fpin_cmd;	/* command (0x16) */
 	__u8		fpin_zero[3];	/* specified as zero - part of cmd */
-	__be32		fpin_desc_cnt;	/* count of descriptors */
-	struct fc_fn_desc	fpin_desc[0];	/* Descriptor list */
+	__be32		desc_len;	/* Length of Descriptor List (in bytes).
+					 * Size of ELS excluding fpin_cmd,
+					 * fpin_zero and desc_len fields.
+					 */
+	struct fc_tlv_desc	fpin_desc[0];	/* Descriptor list */
 };
 
+/* Diagnostic Function Descriptor - FPIN Registration */
+struct fc_df_desc_fpin_reg {
+	__be32		desc_tag;	/* FPIN Registration (0x00030001) */
+	__be32		desc_len;	/* Length of Descriptor (in bytes).
+					 * Size of descriptor excluding
+					 * desc_tag and desc_len fields.
+					 */
+	__be32		count;		/* Number of desc_tags elements */
+	__be32		desc_tags[0];	/* Array of Descriptor Tags.
+					 * Each tag indicates a function
+					 * supported by the N_Port (request)
+					 * or by the  N_Port and Fabric
+					 * Controller (reply; may be a subset
+					 * of the request).
+					 * See ELS_FN_DTAG_xxx for tag values.
+					 */
+};
+
+/*
+ * ELS_RDF - Register Diagnostic Functions
+ */
+struct fc_els_rdf {
+	__u8		fpin_cmd;	/* command (0x19) */
+	__u8		fpin_zero[3];	/* specified as zero - part of cmd */
+	__be32		desc_len;	/* Length of Descriptor List (in bytes).
+					 * Size of ELS excluding fpin_cmd,
+					 * fpin_zero and desc_len fields.
+					 */
+	struct fc_tlv_desc	desc[0];	/* Descriptor list */
+};
+
+/*
+ * ELS RDF LS_ACC Response.
+ */
+struct fc_els_rdf_resp {
+	struct fc_els_ls_acc	acc_hdr;
+	__be32			desc_list_len;	/* Length of response (in
+						 * bytes). Excludes acc_hdr
+						 * and desc_list_len fields.
+						 */
+	struct fc_els_lsri_desc	lsri;
+	struct fc_tlv_desc	desc[0];	/* Supported Descriptor list */
+};
+
+
 #endif /* _FC_ELS_H_ */
diff --git a/include/uapi/scsi/scsi_bsg_fc.h b/include/uapi/scsi/scsi_bsg_fc.h
index 3ae65e9..7f59308 100644
--- a/include/uapi/scsi/scsi_bsg_fc.h
+++ b/include/uapi/scsi/scsi_bsg_fc.h
@@ -209,7 +209,7 @@ struct fc_bsg_host_vendor {
 	__u64 vendor_id;
 
 	/* start of vendor command area */
-	__u32 vendor_cmd[0];
+	__u32 vendor_cmd[];
 };
 
 /* Response:
diff --git a/include/uapi/sound/asoc.h b/include/uapi/sound/asoc.h
index 6048553..a74ca23 100644
--- a/include/uapi/sound/asoc.h
+++ b/include/uapi/sound/asoc.h
@@ -17,6 +17,7 @@
 #define __LINUX_UAPI_SND_ASOC_H
 
 #include <linux/types.h>
+#include <sound/asound.h>
 
 /*
  * Maximum number of channels topology kcontrol can represent.
diff --git a/include/uapi/sound/compress_offload.h b/include/uapi/sound/compress_offload.h
index 56d9567..7184265 100644
--- a/include/uapi/sound/compress_offload.h
+++ b/include/uapi/sound/compress_offload.h
@@ -31,7 +31,7 @@
 #include <sound/compress_params.h>
 
 
-#define SNDRV_COMPRESS_VERSION SNDRV_PROTOCOL_VERSION(0, 1, 2)
+#define SNDRV_COMPRESS_VERSION SNDRV_PROTOCOL_VERSION(0, 2, 0)
 /**
  * struct snd_compressed_buffer - compressed buffer
  * @fragment_size: size of buffer fragment in bytes
diff --git a/include/uapi/sound/compress_params.h b/include/uapi/sound/compress_params.h
index 9c96fb0..79b14389 100644
--- a/include/uapi/sound/compress_params.h
+++ b/include/uapi/sound/compress_params.h
@@ -75,7 +75,9 @@
 #define SND_AUDIOCODEC_G723_1                ((__u32) 0x0000000C)
 #define SND_AUDIOCODEC_G729                  ((__u32) 0x0000000D)
 #define SND_AUDIOCODEC_BESPOKE               ((__u32) 0x0000000E)
-#define SND_AUDIOCODEC_MAX                   SND_AUDIOCODEC_BESPOKE
+#define SND_AUDIOCODEC_ALAC                  ((__u32) 0x0000000F)
+#define SND_AUDIOCODEC_APE                   ((__u32) 0x00000010)
+#define SND_AUDIOCODEC_MAX                   SND_AUDIOCODEC_APE
 
 /*
  * Profile and modes are listed with bit masks. This allows for a
@@ -142,6 +144,9 @@
 #define SND_AUDIOPROFILE_WMA8                ((__u32) 0x00000002)
 #define SND_AUDIOPROFILE_WMA9                ((__u32) 0x00000004)
 #define SND_AUDIOPROFILE_WMA10               ((__u32) 0x00000008)
+#define SND_AUDIOPROFILE_WMA9_PRO            ((__u32) 0x00000010)
+#define SND_AUDIOPROFILE_WMA9_LOSSLESS       ((__u32) 0x00000020)
+#define SND_AUDIOPROFILE_WMA10_LOSSLESS      ((__u32) 0x00000040)
 
 #define SND_AUDIOMODE_WMA_LEVEL1             ((__u32) 0x00000001)
 #define SND_AUDIOMODE_WMA_LEVEL2             ((__u32) 0x00000002)
@@ -326,6 +331,33 @@ struct snd_dec_flac {
 	__u16 reserved;
 } __attribute__((packed, aligned(4)));
 
+struct snd_dec_wma {
+	__u32 encoder_option;
+	__u32 adv_encoder_option;
+	__u32 adv_encoder_option2;
+	__u32 reserved;
+} __attribute__((packed, aligned(4)));
+
+struct snd_dec_alac {
+	__u32 frame_length;
+	__u8 compatible_version;
+	__u8 pb;
+	__u8 mb;
+	__u8 kb;
+	__u32 max_run;
+	__u32 max_frame_bytes;
+} __attribute__((packed, aligned(4)));
+
+struct snd_dec_ape {
+	__u16 compatible_version;
+	__u16 compression_level;
+	__u32 format_flags;
+	__u32 blocks_per_frame;
+	__u32 final_frame_blocks;
+	__u32 total_frames;
+	__u32 seek_table_present;
+} __attribute__((packed, aligned(4)));
+
 union snd_codec_options {
 	struct snd_enc_wma wma;
 	struct snd_enc_vorbis vorbis;
@@ -333,6 +365,9 @@ union snd_codec_options {
 	struct snd_enc_flac flac;
 	struct snd_enc_generic generic;
 	struct snd_dec_flac flac_d;
+	struct snd_dec_wma wma_d;
+	struct snd_dec_alac alac_d;
+	struct snd_dec_ape ape_d;
 } __attribute__((packed, aligned(4)));
 
 /** struct snd_codec_desc - description of codec capabilities
diff --git a/include/uapi/sound/sof/abi.h b/include/uapi/sound/sof/abi.h
index c0ef164..5995b79 100644
--- a/include/uapi/sound/sof/abi.h
+++ b/include/uapi/sound/sof/abi.h
@@ -26,7 +26,7 @@
 
 /* SOF ABI version major, minor and patch numbers */
 #define SOF_ABI_MAJOR 3
-#define SOF_ABI_MINOR 12
+#define SOF_ABI_MINOR 13
 #define SOF_ABI_PATCH 0
 
 /* SOF ABI version number. Format within 32bit word is MMmmmppp */
diff --git a/include/xen/events.h b/include/xen/events.h
index c0e6a05..12b0dcb 100644
--- a/include/xen/events.h
+++ b/include/xen/events.h
@@ -14,8 +14,8 @@
 
 unsigned xen_evtchn_nr_channels(void);
 
-int bind_evtchn_to_irq(unsigned int evtchn);
-int bind_evtchn_to_irqhandler(unsigned int evtchn,
+int bind_evtchn_to_irq(evtchn_port_t evtchn);
+int bind_evtchn_to_irqhandler(evtchn_port_t evtchn,
 			      irq_handler_t handler,
 			      unsigned long irqflags, const char *devname,
 			      void *dev_id);
@@ -31,9 +31,9 @@ int bind_ipi_to_irqhandler(enum ipi_vector ipi,
 			   const char *devname,
 			   void *dev_id);
 int bind_interdomain_evtchn_to_irq(unsigned int remote_domain,
-				   unsigned int remote_port);
+				   evtchn_port_t remote_port);
 int bind_interdomain_evtchn_to_irqhandler(unsigned int remote_domain,
-					  unsigned int remote_port,
+					  evtchn_port_t remote_port,
 					  irq_handler_t handler,
 					  unsigned long irqflags,
 					  const char *devname,
@@ -54,15 +54,15 @@ int xen_set_irq_priority(unsigned irq, unsigned priority);
 /*
  * Allow extra references to event channels exposed to userspace by evtchn
  */
-int evtchn_make_refcounted(unsigned int evtchn);
-int evtchn_get(unsigned int evtchn);
-void evtchn_put(unsigned int evtchn);
+int evtchn_make_refcounted(evtchn_port_t evtchn);
+int evtchn_get(evtchn_port_t evtchn);
+void evtchn_put(evtchn_port_t evtchn);
 
 void xen_send_IPI_one(unsigned int cpu, enum ipi_vector vector);
-void rebind_evtchn_irq(int evtchn, int irq);
+void rebind_evtchn_irq(evtchn_port_t evtchn, int irq);
 int xen_set_affinity_evtchn(struct irq_desc *desc, unsigned int tcpu);
 
-static inline void notify_remote_via_evtchn(int port)
+static inline void notify_remote_via_evtchn(evtchn_port_t port)
 {
 	struct evtchn_send send = { .port = port };
 	(void)HYPERVISOR_event_channel_op(EVTCHNOP_send, &send);
@@ -86,9 +86,9 @@ void xen_poll_irq(int irq);
 void xen_poll_irq_timeout(int irq, u64 timeout);
 
 /* Determine the IRQ which is bound to an event channel */
-unsigned irq_from_evtchn(unsigned int evtchn);
+unsigned int irq_from_evtchn(evtchn_port_t evtchn);
 int irq_from_virq(unsigned int cpu, unsigned int virq);
-unsigned int evtchn_from_irq(unsigned irq);
+evtchn_port_t evtchn_from_irq(unsigned irq);
 
 #ifdef CONFIG_XEN_PVHVM
 /* Xen HVM evtchn vector callback */
diff --git a/include/xen/interface/event_channel.h b/include/xen/interface/event_channel.h
index 45650c9..cf80e33 100644
--- a/include/xen/interface/event_channel.h
+++ b/include/xen/interface/event_channel.h
@@ -220,7 +220,7 @@ struct evtchn_expand_array {
 #define EVTCHNOP_set_priority    13
 struct evtchn_set_priority {
 	/* IN parameters. */
-	uint32_t port;
+	evtchn_port_t port;
 	uint32_t priority;
 };
 
diff --git a/include/xen/xenbus.h b/include/xen/xenbus.h
index 850a43b..5a8315e 100644
--- a/include/xen/xenbus.h
+++ b/include/xen/xenbus.h
@@ -47,6 +47,7 @@
 #include <xen/interface/grant_table.h>
 #include <xen/interface/io/xenbus.h>
 #include <xen/interface/io/xs_wire.h>
+#include <xen/interface/event_channel.h>
 
 #define XENBUS_MAX_RING_GRANT_ORDER 4
 #define XENBUS_MAX_RING_GRANTS      (1U << XENBUS_MAX_RING_GRANT_ORDER)
@@ -209,18 +210,11 @@ int xenbus_grant_ring(struct xenbus_device *dev, void *vaddr,
 		      unsigned int nr_pages, grant_ref_t *grefs);
 int xenbus_map_ring_valloc(struct xenbus_device *dev, grant_ref_t *gnt_refs,
 			   unsigned int nr_grefs, void **vaddr);
-int xenbus_map_ring(struct xenbus_device *dev,
-		    grant_ref_t *gnt_refs, unsigned int nr_grefs,
-		    grant_handle_t *handles, unsigned long *vaddrs,
-		    bool *leaked);
 
 int xenbus_unmap_ring_vfree(struct xenbus_device *dev, void *vaddr);
-int xenbus_unmap_ring(struct xenbus_device *dev,
-		      grant_handle_t *handles, unsigned int nr_handles,
-		      unsigned long *vaddrs);
 
-int xenbus_alloc_evtchn(struct xenbus_device *dev, int *port);
-int xenbus_free_evtchn(struct xenbus_device *dev, int port);
+int xenbus_alloc_evtchn(struct xenbus_device *dev, evtchn_port_t *port);
+int xenbus_free_evtchn(struct xenbus_device *dev, evtchn_port_t port);
 
 enum xenbus_state xenbus_read_driver_state(const char *path);
 
diff --git a/init/Kconfig b/init/Kconfig
index f095ec6..9e22ee8 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -16,6 +16,10 @@
 	default $(shell,$(srctree)/scripts/gcc-version.sh $(CC)) if CC_IS_GCC
 	default 0
 
+config LD_VERSION
+	int
+	default $(shell,$(LD) --version | $(srctree)/scripts/ld-version.sh)
+
 config CC_IS_CLANG
 	def_bool $(success,$(CC) --version | head -n 1 | grep -q clang)
 
@@ -872,7 +876,7 @@
 	This option only enables generic Block IO controller infrastructure.
 	One needs to also enable actual IO controlling logic/policy. For
 	enabling proportional weight division of disk bandwidth in CFQ, set
-	CONFIG_CFQ_GROUP_IOSCHED=y; for enabling throttling policy, set
+	CONFIG_BFQ_GROUP_IOSCHED=y; for enabling throttling policy, set
 	CONFIG_BLK_DEV_THROTTLING=y.
 
 	See Documentation/admin-guide/cgroup-v1/blkio-controller.rst for more information.
@@ -1029,7 +1033,8 @@
 	help
 	  This option extends the perf per-cpu mode to restrict monitoring
 	  to threads which belong to the cgroup specified and run on the
-	  designated cpu.
+	  designated cpu.  Or this can be used to have cgroup ID in samples
+	  so that it can monitor performance events among cgroups.
 
 	  Say N if unsure.
 
@@ -1537,7 +1542,6 @@
 
 config IO_URING
 	bool "Enable IO uring support" if EXPERT
-	select ANON_INODES
 	select IO_WQ
 	default y
 	help
@@ -1555,6 +1559,11 @@
 	  applications use these syscalls, you can disable this option to save
 	  space.
 
+config HAVE_ARCH_USERFAULTFD_WP
+	bool
+	help
+	  Arch has userfaultfd write protection support
+
 config MEMBARRIER
 	bool "Enable membarrier() system call" if EXPERT
 	default y
diff --git a/init/Makefile b/init/Makefile
index 6246a06..d45e967 100644
--- a/init/Makefile
+++ b/init/Makefile
@@ -35,4 +35,4 @@
 	@$($(quiet)chk_compile.h)
 	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkcompile_h $@	\
 	"$(UTS_MACHINE)" "$(CONFIG_SMP)" "$(CONFIG_PREEMPT)"	\
-	"$(CONFIG_PREEMPT_RT)" "$(CC) $(KBUILD_CFLAGS)"
+	"$(CONFIG_PREEMPT_RT)" "$(CC)" "$(LD)"
diff --git a/init/main.c b/init/main.c
index ee4947a..a48617f 100644
--- a/init/main.c
+++ b/init/main.c
@@ -353,6 +353,8 @@ static int __init bootconfig_params(char *param, char *val,
 static void __init setup_boot_config(const char *cmdline)
 {
 	static char tmp_cmdline[COMMAND_LINE_SIZE] __initdata;
+	const char *msg;
+	int pos;
 	u32 size, csum;
 	char *data, *copy;
 	u32 *hdr;
@@ -400,10 +402,14 @@ static void __init setup_boot_config(const char *cmdline)
 	memcpy(copy, data, size);
 	copy[size] = '\0';
 
-	ret = xbc_init(copy);
-	if (ret < 0)
-		pr_err("Failed to parse bootconfig\n");
-	else {
+	ret = xbc_init(copy, &msg, &pos);
+	if (ret < 0) {
+		if (pos < 0)
+			pr_err("Failed to init bootconfig: %s.\n", msg);
+		else
+			pr_err("Failed to parse bootconfig: %s at %d.\n",
+				msg, pos);
+	} else {
 		pr_info("Load bootconfig: %d bytes %d nodes\n", size, ret);
 		/* keys starting with "kernel." are passed via cmdline */
 		extra_command_line = xbc_make_cmdline("kernel");
@@ -907,7 +913,6 @@ asmlinkage __visible void __init start_kernel(void)
 	boot_init_stack_canary();
 
 	time_init();
-	printk_safe_init();
 	perf_event_init();
 	profile_init();
 	call_function_init();
diff --git a/ipc/mqueue.c b/ipc/mqueue.c
index 49a05ba..dc8307b 100644
--- a/ipc/mqueue.c
+++ b/ipc/mqueue.c
@@ -239,11 +239,10 @@ static inline void msg_tree_erase(struct posix_msg_tree_node *leaf,
 		info->msg_tree_rightmost = rb_prev(node);
 
 	rb_erase(node, &info->msg_tree);
-	if (info->node_cache) {
+	if (info->node_cache)
 		kfree(leaf);
-	} else {
+	else
 		info->node_cache = leaf;
-	}
 }
 
 static inline struct msg_msg *msg_get(struct mqueue_inode_info *info)
diff --git a/ipc/shm.c b/ipc/shm.c
index ce1ca9f..0ba6add 100644
--- a/ipc/shm.c
+++ b/ipc/shm.c
@@ -1332,7 +1332,7 @@ static int copy_compat_shmid_from_user(struct shmid64_ds *out, void __user *buf,
 	}
 }
 
-long compat_ksys_shmctl(int shmid, int cmd, void __user *uptr, int version)
+static long compat_ksys_shmctl(int shmid, int cmd, void __user *uptr, int version)
 {
 	struct ipc_namespace *ns;
 	struct shmid64_ds sem64;
diff --git a/ipc/util.c b/ipc/util.c
index fe61df5..7acccfd 100644
--- a/ipc/util.c
+++ b/ipc/util.c
@@ -764,13 +764,13 @@ static struct kern_ipc_perm *sysvipc_find_ipc(struct ipc_ids *ids, loff_t pos,
 			total++;
 	}
 
+	*new_pos = pos + 1;
 	if (total >= ids->in_use)
 		return NULL;
 
 	for (; pos < ipc_mni; pos++) {
 		ipc = idr_find(&ids->ipcs_idr, pos);
 		if (ipc != NULL) {
-			*new_pos = pos + 1;
 			rcu_read_lock();
 			ipc_lock_object(ipc);
 			return ipc;
@@ -885,6 +885,7 @@ static int sysvipc_proc_release(struct inode *inode, struct file *file)
 }
 
 static const struct proc_ops sysvipc_proc_ops = {
+	.proc_flags	= PROC_ENTRY_PERMANENT,
 	.proc_open	= sysvipc_proc_open,
 	.proc_read	= seq_read,
 	.proc_lseek	= seq_lseek,
diff --git a/kernel/.gitignore b/kernel/.gitignore
index 34d1e77..78701ea 100644
--- a/kernel/.gitignore
+++ b/kernel/.gitignore
@@ -1,6 +1,4 @@
-#
-# Generated files
-#
+# SPDX-License-Identifier: GPL-2.0-only
 kheaders.md5
 timeconst.h
 hz.bc
diff --git a/kernel/audit_fsnotify.c b/kernel/audit_fsnotify.c
index f0d2433..3596448 100644
--- a/kernel/audit_fsnotify.c
+++ b/kernel/audit_fsnotify.c
@@ -160,23 +160,14 @@ static int audit_mark_handle_event(struct fsnotify_group *group,
 {
 	struct fsnotify_mark *inode_mark = fsnotify_iter_inode_mark(iter_info);
 	struct audit_fsnotify_mark *audit_mark;
-	const struct inode *inode = NULL;
+	const struct inode *inode = fsnotify_data_inode(data, data_type);
 
 	audit_mark = container_of(inode_mark, struct audit_fsnotify_mark, mark);
 
 	BUG_ON(group != audit_fsnotify_group);
 
-	switch (data_type) {
-	case (FSNOTIFY_EVENT_PATH):
-		inode = ((const struct path *)data)->dentry->d_inode;
-		break;
-	case (FSNOTIFY_EVENT_INODE):
-		inode = (const struct inode *)data;
-		break;
-	default:
-		BUG();
+	if (WARN_ON(!inode))
 		return 0;
-	}
 
 	if (mask & (FS_CREATE|FS_MOVED_TO|FS_DELETE|FS_MOVED_FROM)) {
 		if (audit_compare_dname_path(dname, audit_mark->path, AUDIT_NAME_FULL))
diff --git a/kernel/audit_watch.c b/kernel/audit_watch.c
index 8a8fd73..e09c551 100644
--- a/kernel/audit_watch.c
+++ b/kernel/audit_watch.c
@@ -471,25 +471,13 @@ static int audit_watch_handle_event(struct fsnotify_group *group,
 				    struct fsnotify_iter_info *iter_info)
 {
 	struct fsnotify_mark *inode_mark = fsnotify_iter_inode_mark(iter_info);
-	const struct inode *inode;
+	const struct inode *inode = fsnotify_data_inode(data, data_type);
 	struct audit_parent *parent;
 
 	parent = container_of(inode_mark, struct audit_parent, mark);
 
 	BUG_ON(group != audit_watch_group);
-
-	switch (data_type) {
-	case (FSNOTIFY_EVENT_PATH):
-		inode = d_backing_inode(((const struct path *)data)->dentry);
-		break;
-	case (FSNOTIFY_EVENT_INODE):
-		inode = (const struct inode *)data;
-		break;
-	default:
-		BUG();
-		inode = NULL;
-		break;
-	}
+	WARN_ON(!inode);
 
 	if (mask & (FS_CREATE|FS_MOVED_TO) && inode)
 		audit_update_watch(parent, dname, inode->i_sb->s_dev, inode->i_ino, 0);
diff --git a/kernel/bpf/bpf_lru_list.h b/kernel/bpf/bpf_lru_list.h
index f025046..6b12f06 100644
--- a/kernel/bpf/bpf_lru_list.h
+++ b/kernel/bpf/bpf_lru_list.h
@@ -30,7 +30,7 @@ struct bpf_lru_node {
 struct bpf_lru_list {
 	struct list_head lists[NR_BPF_LRU_LIST_T];
 	unsigned int counts[NR_BPF_LRU_LIST_COUNT];
-	/* The next inacitve list rotation starts from here */
+	/* The next inactive list rotation starts from here */
 	struct list_head *next_inactive_rotation;
 
 	raw_spinlock_t lock ____cacheline_aligned_in_smp;
diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c
index 64783da..d85f372 100644
--- a/kernel/bpf/syscall.c
+++ b/kernel/bpf/syscall.c
@@ -586,9 +586,7 @@ static void bpf_map_mmap_open(struct vm_area_struct *vma)
 {
 	struct bpf_map *map = vma->vm_file->private_data;
 
-	bpf_map_inc_with_uref(map);
-
-	if (vma->vm_flags & VM_WRITE) {
+	if (vma->vm_flags & VM_MAYWRITE) {
 		mutex_lock(&map->freeze_mutex);
 		map->writecnt++;
 		mutex_unlock(&map->freeze_mutex);
@@ -600,13 +598,11 @@ static void bpf_map_mmap_close(struct vm_area_struct *vma)
 {
 	struct bpf_map *map = vma->vm_file->private_data;
 
-	if (vma->vm_flags & VM_WRITE) {
+	if (vma->vm_flags & VM_MAYWRITE) {
 		mutex_lock(&map->freeze_mutex);
 		map->writecnt--;
 		mutex_unlock(&map->freeze_mutex);
 	}
-
-	bpf_map_put_with_uref(map);
 }
 
 static const struct vm_operations_struct bpf_map_default_vmops = {
@@ -635,14 +631,16 @@ static int bpf_map_mmap(struct file *filp, struct vm_area_struct *vma)
 	/* set default open/close callbacks */
 	vma->vm_ops = &bpf_map_default_vmops;
 	vma->vm_private_data = map;
+	vma->vm_flags &= ~VM_MAYEXEC;
+	if (!(vma->vm_flags & VM_WRITE))
+		/* disallow re-mapping with PROT_WRITE */
+		vma->vm_flags &= ~VM_MAYWRITE;
 
 	err = map->ops->map_mmap(map, vma);
 	if (err)
 		goto out;
 
-	bpf_map_inc_with_uref(map);
-
-	if (vma->vm_flags & VM_WRITE)
+	if (vma->vm_flags & VM_MAYWRITE)
 		map->writecnt++;
 out:
 	mutex_unlock(&map->freeze_mutex);
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index 04c6630..38cfcf7 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -1255,8 +1255,7 @@ static void __mark_reg_unknown(const struct bpf_verifier_env *env,
 	reg->type = SCALAR_VALUE;
 	reg->var_off = tnum_unknown;
 	reg->frameno = 0;
-	reg->precise = env->subprog_cnt > 1 || !env->allow_ptr_leaks ?
-		       true : false;
+	reg->precise = env->subprog_cnt > 1 || !env->allow_ptr_leaks;
 	__mark_reg_unbounded(reg);
 }
 
diff --git a/kernel/cgroup/cgroup-v1.c b/kernel/cgroup/cgroup-v1.c
index f2d7cea..191c329 100644
--- a/kernel/cgroup/cgroup-v1.c
+++ b/kernel/cgroup/cgroup-v1.c
@@ -38,10 +38,7 @@ static bool cgroup_no_v1_named;
  */
 static struct workqueue_struct *cgroup_pidlist_destroy_wq;
 
-/*
- * Protects cgroup_subsys->release_agent_path.  Modifying it also requires
- * cgroup_mutex.  Reading requires either cgroup_mutex or this spinlock.
- */
+/* protects cgroup_subsys->release_agent_path */
 static DEFINE_SPINLOCK(release_agent_path_lock);
 
 bool cgroup1_ssid_disabled(int ssid)
@@ -775,22 +772,29 @@ void cgroup1_release_agent(struct work_struct *work)
 {
 	struct cgroup *cgrp =
 		container_of(work, struct cgroup, release_agent_work);
-	char *pathbuf = NULL, *agentbuf = NULL;
+	char *pathbuf, *agentbuf;
 	char *argv[3], *envp[3];
 	int ret;
 
-	mutex_lock(&cgroup_mutex);
+	/* snoop agent path and exit early if empty */
+	if (!cgrp->root->release_agent_path[0])
+		return;
 
+	/* prepare argument buffers */
 	pathbuf = kmalloc(PATH_MAX, GFP_KERNEL);
-	agentbuf = kstrdup(cgrp->root->release_agent_path, GFP_KERNEL);
-	if (!pathbuf || !agentbuf || !strlen(agentbuf))
-		goto out;
+	agentbuf = kmalloc(PATH_MAX, GFP_KERNEL);
+	if (!pathbuf || !agentbuf)
+		goto out_free;
 
-	spin_lock_irq(&css_set_lock);
-	ret = cgroup_path_ns_locked(cgrp, pathbuf, PATH_MAX, &init_cgroup_ns);
-	spin_unlock_irq(&css_set_lock);
+	spin_lock(&release_agent_path_lock);
+	strlcpy(agentbuf, cgrp->root->release_agent_path, PATH_MAX);
+	spin_unlock(&release_agent_path_lock);
+	if (!agentbuf[0])
+		goto out_free;
+
+	ret = cgroup_path_ns(cgrp, pathbuf, PATH_MAX, &init_cgroup_ns);
 	if (ret < 0 || ret >= PATH_MAX)
-		goto out;
+		goto out_free;
 
 	argv[0] = agentbuf;
 	argv[1] = pathbuf;
@@ -801,11 +805,7 @@ void cgroup1_release_agent(struct work_struct *work)
 	envp[1] = "PATH=/sbin:/bin:/usr/sbin:/usr/bin";
 	envp[2] = NULL;
 
-	mutex_unlock(&cgroup_mutex);
 	call_usermodehelper(argv[0], argv, envp, UMH_WAIT_EXEC);
-	goto out_free;
-out:
-	mutex_unlock(&cgroup_mutex);
 out_free:
 	kfree(agentbuf);
 	kfree(pathbuf);
diff --git a/kernel/cgroup/cgroup.c b/kernel/cgroup/cgroup.c
index 755c07d..06b5ea9 100644
--- a/kernel/cgroup/cgroup.c
+++ b/kernel/cgroup/cgroup.c
@@ -1966,7 +1966,8 @@ int cgroup_setup_root(struct cgroup_root *root, u16 ss_mask)
 
 	root->kf_root = kernfs_create_root(kf_sops,
 					   KERNFS_ROOT_CREATE_DEACTIVATED |
-					   KERNFS_ROOT_SUPPORT_EXPORTOP,
+					   KERNFS_ROOT_SUPPORT_EXPORTOP |
+					   KERNFS_ROOT_SUPPORT_USER_XATTR,
 					   root_cgrp);
 	if (IS_ERR(root->kf_root)) {
 		ret = PTR_ERR(root->kf_root);
@@ -2726,11 +2727,7 @@ int cgroup_attach_task(struct cgroup *dst_cgrp, struct task_struct *leader,
 {
 	DEFINE_CGROUP_MGCTX(mgctx);
 	struct task_struct *task;
-	int ret;
-
-	ret = cgroup_migrate_vet_dst(dst_cgrp);
-	if (ret)
-		return ret;
+	int ret = 0;
 
 	/* look up all src csets */
 	spin_lock_irq(&css_set_lock);
@@ -4160,7 +4157,8 @@ struct cgroup_subsys_state *css_next_child(struct cgroup_subsys_state *pos,
 	} else if (likely(!(pos->flags & CSS_RELEASED))) {
 		next = list_entry_rcu(pos->sibling.next, struct cgroup_subsys_state, sibling);
 	} else {
-		list_for_each_entry_rcu(next, &parent->children, sibling)
+		list_for_each_entry_rcu(next, &parent->children, sibling,
+					lockdep_is_held(&cgroup_mutex))
 			if (next->serial_nr > pos->serial_nr)
 				break;
 	}
@@ -4403,29 +4401,24 @@ static void css_task_iter_advance_css_set(struct css_task_iter *it)
 
 	lockdep_assert_held(&css_set_lock);
 
-	/* Advance to the next non-empty css_set */
-	do {
-		cset = css_task_iter_next_css_set(it);
-		if (!cset) {
-			it->task_pos = NULL;
-			return;
+	/* Advance to the next non-empty css_set and find first non-empty tasks list*/
+	while ((cset = css_task_iter_next_css_set(it))) {
+		if (!list_empty(&cset->tasks)) {
+			it->cur_tasks_head = &cset->tasks;
+			break;
+		} else if (!list_empty(&cset->mg_tasks)) {
+			it->cur_tasks_head = &cset->mg_tasks;
+			break;
+		} else if (!list_empty(&cset->dying_tasks)) {
+			it->cur_tasks_head = &cset->dying_tasks;
+			break;
 		}
-	} while (!css_set_populated(cset) && list_empty(&cset->dying_tasks));
-
-	if (!list_empty(&cset->tasks)) {
-		it->task_pos = cset->tasks.next;
-		it->cur_tasks_head = &cset->tasks;
-	} else if (!list_empty(&cset->mg_tasks)) {
-		it->task_pos = cset->mg_tasks.next;
-		it->cur_tasks_head = &cset->mg_tasks;
-	} else {
-		it->task_pos = cset->dying_tasks.next;
-		it->cur_tasks_head = &cset->dying_tasks;
 	}
-
-	it->tasks_head = &cset->tasks;
-	it->mg_tasks_head = &cset->mg_tasks;
-	it->dying_tasks_head = &cset->dying_tasks;
+	if (!cset) {
+		it->task_pos = NULL;
+		return;
+	}
+	it->task_pos = it->cur_tasks_head->next;
 
 	/*
 	 * We don't keep css_sets locked across iteration steps and thus
@@ -4470,24 +4463,24 @@ static void css_task_iter_advance(struct css_task_iter *it)
 repeat:
 	if (it->task_pos) {
 		/*
-		 * Advance iterator to find next entry.  cset->tasks is
-		 * consumed first and then ->mg_tasks.  After ->mg_tasks,
-		 * we move onto the next cset.
+		 * Advance iterator to find next entry. We go through cset
+		 * tasks, mg_tasks and dying_tasks, when consumed we move onto
+		 * the next cset.
 		 */
 		if (it->flags & CSS_TASK_ITER_SKIPPED)
 			it->flags &= ~CSS_TASK_ITER_SKIPPED;
 		else
 			it->task_pos = it->task_pos->next;
 
-		if (it->task_pos == it->tasks_head) {
-			it->task_pos = it->mg_tasks_head->next;
-			it->cur_tasks_head = it->mg_tasks_head;
+		if (it->task_pos == &it->cur_cset->tasks) {
+			it->cur_tasks_head = &it->cur_cset->mg_tasks;
+			it->task_pos = it->cur_tasks_head->next;
 		}
-		if (it->task_pos == it->mg_tasks_head) {
-			it->task_pos = it->dying_tasks_head->next;
-			it->cur_tasks_head = it->dying_tasks_head;
+		if (it->task_pos == &it->cur_cset->mg_tasks) {
+			it->cur_tasks_head = &it->cur_cset->dying_tasks;
+			it->task_pos = it->cur_tasks_head->next;
 		}
-		if (it->task_pos == it->dying_tasks_head)
+		if (it->task_pos == &it->cur_cset->dying_tasks)
 			css_task_iter_advance_css_set(it);
 	} else {
 		/* called from start, proceed to the first cset */
@@ -4505,12 +4498,12 @@ static void css_task_iter_advance(struct css_task_iter *it)
 			goto repeat;
 
 		/* and dying leaders w/o live member threads */
-		if (it->cur_tasks_head == it->dying_tasks_head &&
+		if (it->cur_tasks_head == &it->cur_cset->dying_tasks &&
 		    !atomic_read(&task->signal->live))
 			goto repeat;
 	} else {
 		/* skip all dying ones */
-		if (it->cur_tasks_head == it->dying_tasks_head)
+		if (it->cur_tasks_head == &it->cur_cset->dying_tasks)
 			goto repeat;
 	}
 }
@@ -4674,13 +4667,28 @@ static int cgroup_procs_show(struct seq_file *s, void *v)
 	return 0;
 }
 
+static int cgroup_may_write(const struct cgroup *cgrp, struct super_block *sb)
+{
+	int ret;
+	struct inode *inode;
+
+	lockdep_assert_held(&cgroup_mutex);
+
+	inode = kernfs_get_inode(sb, cgrp->procs_file.kn);
+	if (!inode)
+		return -ENOMEM;
+
+	ret = inode_permission(inode, MAY_WRITE);
+	iput(inode);
+	return ret;
+}
+
 static int cgroup_procs_write_permission(struct cgroup *src_cgrp,
 					 struct cgroup *dst_cgrp,
 					 struct super_block *sb)
 {
 	struct cgroup_namespace *ns = current->nsproxy->cgroup_ns;
 	struct cgroup *com_cgrp = src_cgrp;
-	struct inode *inode;
 	int ret;
 
 	lockdep_assert_held(&cgroup_mutex);
@@ -4690,12 +4698,7 @@ static int cgroup_procs_write_permission(struct cgroup *src_cgrp,
 		com_cgrp = cgroup_parent(com_cgrp);
 
 	/* %current should be authorized to migrate to the common ancestor */
-	inode = kernfs_get_inode(sb, com_cgrp->procs_file.kn);
-	if (!inode)
-		return -ENOMEM;
-
-	ret = inode_permission(inode, MAY_WRITE);
-	iput(inode);
+	ret = cgroup_may_write(com_cgrp, sb);
 	if (ret)
 		return ret;
 
@@ -4711,6 +4714,26 @@ static int cgroup_procs_write_permission(struct cgroup *src_cgrp,
 	return 0;
 }
 
+static int cgroup_attach_permissions(struct cgroup *src_cgrp,
+				     struct cgroup *dst_cgrp,
+				     struct super_block *sb, bool threadgroup)
+{
+	int ret = 0;
+
+	ret = cgroup_procs_write_permission(src_cgrp, dst_cgrp, sb);
+	if (ret)
+		return ret;
+
+	ret = cgroup_migrate_vet_dst(dst_cgrp);
+	if (ret)
+		return ret;
+
+	if (!threadgroup && (src_cgrp->dom_cgrp != dst_cgrp->dom_cgrp))
+		ret = -EOPNOTSUPP;
+
+	return ret;
+}
+
 static ssize_t cgroup_procs_write(struct kernfs_open_file *of,
 				  char *buf, size_t nbytes, loff_t off)
 {
@@ -4733,8 +4756,8 @@ static ssize_t cgroup_procs_write(struct kernfs_open_file *of,
 	src_cgrp = task_cgroup_from_root(task, &cgrp_dfl_root);
 	spin_unlock_irq(&css_set_lock);
 
-	ret = cgroup_procs_write_permission(src_cgrp, dst_cgrp,
-					    of->file->f_path.dentry->d_sb);
+	ret = cgroup_attach_permissions(src_cgrp, dst_cgrp,
+					of->file->f_path.dentry->d_sb, true);
 	if (ret)
 		goto out_finish;
 
@@ -4778,16 +4801,11 @@ static ssize_t cgroup_threads_write(struct kernfs_open_file *of,
 	spin_unlock_irq(&css_set_lock);
 
 	/* thread migrations follow the cgroup.procs delegation rule */
-	ret = cgroup_procs_write_permission(src_cgrp, dst_cgrp,
-					    of->file->f_path.dentry->d_sb);
+	ret = cgroup_attach_permissions(src_cgrp, dst_cgrp,
+					of->file->f_path.dentry->d_sb, false);
 	if (ret)
 		goto out_finish;
 
-	/* and must be contained in the same domain */
-	ret = -EOPNOTSUPP;
-	if (src_cgrp->dom_cgrp != dst_cgrp->dom_cgrp)
-		goto out_finish;
-
 	ret = cgroup_attach_task(dst_cgrp, task, false);
 
 out_finish:
@@ -5876,8 +5894,7 @@ int proc_cgroup_show(struct seq_file *m, struct pid_namespace *ns,
  * @child: pointer to task_struct of forking parent process.
  *
  * A task is associated with the init_css_set until cgroup_post_fork()
- * attaches it to the parent's css_set.  Empty cg_list indicates that
- * @child isn't holding reference to its css_set.
+ * attaches it to the target css_set.
  */
 void cgroup_fork(struct task_struct *child)
 {
@@ -5885,21 +5902,172 @@ void cgroup_fork(struct task_struct *child)
 	INIT_LIST_HEAD(&child->cg_list);
 }
 
+static struct cgroup *cgroup_get_from_file(struct file *f)
+{
+	struct cgroup_subsys_state *css;
+	struct cgroup *cgrp;
+
+	css = css_tryget_online_from_dir(f->f_path.dentry, NULL);
+	if (IS_ERR(css))
+		return ERR_CAST(css);
+
+	cgrp = css->cgroup;
+	if (!cgroup_on_dfl(cgrp)) {
+		cgroup_put(cgrp);
+		return ERR_PTR(-EBADF);
+	}
+
+	return cgrp;
+}
+
+/**
+ * cgroup_css_set_fork - find or create a css_set for a child process
+ * @kargs: the arguments passed to create the child process
+ *
+ * This functions finds or creates a new css_set which the child
+ * process will be attached to in cgroup_post_fork(). By default,
+ * the child process will be given the same css_set as its parent.
+ *
+ * If CLONE_INTO_CGROUP is specified this function will try to find an
+ * existing css_set which includes the requested cgroup and if not create
+ * a new css_set that the child will be attached to later. If this function
+ * succeeds it will hold cgroup_threadgroup_rwsem on return. If
+ * CLONE_INTO_CGROUP is requested this function will grab cgroup mutex
+ * before grabbing cgroup_threadgroup_rwsem and will hold a reference
+ * to the target cgroup.
+ */
+static int cgroup_css_set_fork(struct kernel_clone_args *kargs)
+	__acquires(&cgroup_mutex) __acquires(&cgroup_threadgroup_rwsem)
+{
+	int ret;
+	struct cgroup *dst_cgrp = NULL;
+	struct css_set *cset;
+	struct super_block *sb;
+	struct file *f;
+
+	if (kargs->flags & CLONE_INTO_CGROUP)
+		mutex_lock(&cgroup_mutex);
+
+	cgroup_threadgroup_change_begin(current);
+
+	spin_lock_irq(&css_set_lock);
+	cset = task_css_set(current);
+	get_css_set(cset);
+	spin_unlock_irq(&css_set_lock);
+
+	if (!(kargs->flags & CLONE_INTO_CGROUP)) {
+		kargs->cset = cset;
+		return 0;
+	}
+
+	f = fget_raw(kargs->cgroup);
+	if (!f) {
+		ret = -EBADF;
+		goto err;
+	}
+	sb = f->f_path.dentry->d_sb;
+
+	dst_cgrp = cgroup_get_from_file(f);
+	if (IS_ERR(dst_cgrp)) {
+		ret = PTR_ERR(dst_cgrp);
+		dst_cgrp = NULL;
+		goto err;
+	}
+
+	if (cgroup_is_dead(dst_cgrp)) {
+		ret = -ENODEV;
+		goto err;
+	}
+
+	/*
+	 * Verify that we the target cgroup is writable for us. This is
+	 * usually done by the vfs layer but since we're not going through
+	 * the vfs layer here we need to do it "manually".
+	 */
+	ret = cgroup_may_write(dst_cgrp, sb);
+	if (ret)
+		goto err;
+
+	ret = cgroup_attach_permissions(cset->dfl_cgrp, dst_cgrp, sb,
+					!(kargs->flags & CLONE_THREAD));
+	if (ret)
+		goto err;
+
+	kargs->cset = find_css_set(cset, dst_cgrp);
+	if (!kargs->cset) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	put_css_set(cset);
+	fput(f);
+	kargs->cgrp = dst_cgrp;
+	return ret;
+
+err:
+	cgroup_threadgroup_change_end(current);
+	mutex_unlock(&cgroup_mutex);
+	if (f)
+		fput(f);
+	if (dst_cgrp)
+		cgroup_put(dst_cgrp);
+	put_css_set(cset);
+	if (kargs->cset)
+		put_css_set(kargs->cset);
+	return ret;
+}
+
+/**
+ * cgroup_css_set_put_fork - drop references we took during fork
+ * @kargs: the arguments passed to create the child process
+ *
+ * Drop references to the prepared css_set and target cgroup if
+ * CLONE_INTO_CGROUP was requested.
+ */
+static void cgroup_css_set_put_fork(struct kernel_clone_args *kargs)
+	__releases(&cgroup_threadgroup_rwsem) __releases(&cgroup_mutex)
+{
+	cgroup_threadgroup_change_end(current);
+
+	if (kargs->flags & CLONE_INTO_CGROUP) {
+		struct cgroup *cgrp = kargs->cgrp;
+		struct css_set *cset = kargs->cset;
+
+		mutex_unlock(&cgroup_mutex);
+
+		if (cset) {
+			put_css_set(cset);
+			kargs->cset = NULL;
+		}
+
+		if (cgrp) {
+			cgroup_put(cgrp);
+			kargs->cgrp = NULL;
+		}
+	}
+}
+
 /**
  * cgroup_can_fork - called on a new task before the process is exposed
- * @child: the task in question.
+ * @child: the child process
  *
- * This calls the subsystem can_fork() callbacks. If the can_fork() callback
- * returns an error, the fork aborts with that error code. This allows for
- * a cgroup subsystem to conditionally allow or deny new forks.
+ * This prepares a new css_set for the child process which the child will
+ * be attached to in cgroup_post_fork().
+ * This calls the subsystem can_fork() callbacks. If the cgroup_can_fork()
+ * callback returns an error, the fork aborts with that error code. This
+ * allows for a cgroup subsystem to conditionally allow or deny new forks.
  */
-int cgroup_can_fork(struct task_struct *child)
+int cgroup_can_fork(struct task_struct *child, struct kernel_clone_args *kargs)
 {
 	struct cgroup_subsys *ss;
 	int i, j, ret;
 
+	ret = cgroup_css_set_fork(kargs);
+	if (ret)
+		return ret;
+
 	do_each_subsys_mask(ss, i, have_canfork_callback) {
-		ret = ss->can_fork(child);
+		ret = ss->can_fork(child, kargs->cset);
 		if (ret)
 			goto out_revert;
 	} while_each_subsys_mask();
@@ -5911,54 +6079,64 @@ int cgroup_can_fork(struct task_struct *child)
 		if (j >= i)
 			break;
 		if (ss->cancel_fork)
-			ss->cancel_fork(child);
+			ss->cancel_fork(child, kargs->cset);
 	}
 
+	cgroup_css_set_put_fork(kargs);
+
 	return ret;
 }
 
 /**
  * cgroup_cancel_fork - called if a fork failed after cgroup_can_fork()
- * @child: the task in question
+ * @child: the child process
+ * @kargs: the arguments passed to create the child process
  *
  * This calls the cancel_fork() callbacks if a fork failed *after*
- * cgroup_can_fork() succeded.
+ * cgroup_can_fork() succeded and cleans up references we took to
+ * prepare a new css_set for the child process in cgroup_can_fork().
  */
-void cgroup_cancel_fork(struct task_struct *child)
+void cgroup_cancel_fork(struct task_struct *child,
+			struct kernel_clone_args *kargs)
 {
 	struct cgroup_subsys *ss;
 	int i;
 
 	for_each_subsys(ss, i)
 		if (ss->cancel_fork)
-			ss->cancel_fork(child);
+			ss->cancel_fork(child, kargs->cset);
+
+	cgroup_css_set_put_fork(kargs);
 }
 
 /**
- * cgroup_post_fork - called on a new task after adding it to the task list
- * @child: the task in question
+ * cgroup_post_fork - finalize cgroup setup for the child process
+ * @child: the child process
  *
- * Adds the task to the list running through its css_set if necessary and
- * call the subsystem fork() callbacks.  Has to be after the task is
- * visible on the task list in case we race with the first call to
- * cgroup_task_iter_start() - to guarantee that the new task ends up on its
- * list.
+ * Attach the child process to its css_set calling the subsystem fork()
+ * callbacks.
  */
-void cgroup_post_fork(struct task_struct *child)
+void cgroup_post_fork(struct task_struct *child,
+		      struct kernel_clone_args *kargs)
+	__releases(&cgroup_threadgroup_rwsem) __releases(&cgroup_mutex)
 {
 	struct cgroup_subsys *ss;
 	struct css_set *cset;
 	int i;
 
+	cset = kargs->cset;
+	kargs->cset = NULL;
+
 	spin_lock_irq(&css_set_lock);
 
 	/* init tasks are special, only link regular threads */
 	if (likely(child->pid)) {
 		WARN_ON_ONCE(!list_empty(&child->cg_list));
-		cset = task_css_set(current); /* current is @child's parent */
-		get_css_set(cset);
 		cset->nr_tasks++;
 		css_set_move_task(child, NULL, cset, false);
+	} else {
+		put_css_set(cset);
+		cset = NULL;
 	}
 
 	/*
@@ -5990,6 +6168,17 @@ void cgroup_post_fork(struct task_struct *child)
 	do_each_subsys_mask(ss, i, have_fork_callback) {
 		ss->fork(child);
 	} while_each_subsys_mask();
+
+	/* Make the new cset the root_cset of the new cgroup namespace. */
+	if (kargs->flags & CLONE_NEWCGROUP) {
+		struct css_set *rcset = child->nsproxy->cgroup_ns->root_cset;
+
+		get_css_set(cset);
+		child->nsproxy->cgroup_ns->root_cset = cset;
+		put_css_set(rcset);
+	}
+
+	cgroup_css_set_put_fork(kargs);
 }
 
 /**
@@ -6176,7 +6365,6 @@ EXPORT_SYMBOL_GPL(cgroup_get_from_path);
  */
 struct cgroup *cgroup_get_from_fd(int fd)
 {
-	struct cgroup_subsys_state *css;
 	struct cgroup *cgrp;
 	struct file *f;
 
@@ -6184,17 +6372,8 @@ struct cgroup *cgroup_get_from_fd(int fd)
 	if (!f)
 		return ERR_PTR(-EBADF);
 
-	css = css_tryget_online_from_dir(f->f_path.dentry, NULL);
+	cgrp = cgroup_get_from_file(f);
 	fput(f);
-	if (IS_ERR(css))
-		return ERR_CAST(css);
-
-	cgrp = css->cgroup;
-	if (!cgroup_on_dfl(cgrp)) {
-		cgroup_put(cgrp);
-		return ERR_PTR(-EBADF);
-	}
-
 	return cgrp;
 }
 EXPORT_SYMBOL_GPL(cgroup_get_from_fd);
diff --git a/kernel/cgroup/cpuset.c b/kernel/cgroup/cpuset.c
index 58f5073..729d3a5 100644
--- a/kernel/cgroup/cpuset.c
+++ b/kernel/cgroup/cpuset.c
@@ -358,8 +358,12 @@ static DECLARE_WORK(cpuset_hotplug_work, cpuset_hotplug_workfn);
 static DECLARE_WAIT_QUEUE_HEAD(cpuset_attach_wq);
 
 /*
- * Cgroup v2 behavior is used when on default hierarchy or the
- * cgroup_v2_mode flag is set.
+ * Cgroup v2 behavior is used on the "cpus" and "mems" control files when
+ * on default hierarchy or when the cpuset_v2_mode flag is set by mounting
+ * the v1 cpuset cgroup filesystem with the "cpuset_v2_mode" mount option.
+ * With v2 behavior, "cpus" and "mems" are always what the users have
+ * requested and won't be changed by hotplug events. Only the effective
+ * cpus or mems will be affected.
  */
 static inline bool is_in_v2_mode(void)
 {
diff --git a/kernel/cgroup/pids.c b/kernel/cgroup/pids.c
index 138059e..511af87 100644
--- a/kernel/cgroup/pids.c
+++ b/kernel/cgroup/pids.c
@@ -33,6 +33,7 @@
 #include <linux/atomic.h>
 #include <linux/cgroup.h>
 #include <linux/slab.h>
+#include <linux/sched/task.h>
 
 #define PIDS_MAX (PID_MAX_LIMIT + 1ULL)
 #define PIDS_MAX_STR "max"
@@ -214,13 +215,16 @@ static void pids_cancel_attach(struct cgroup_taskset *tset)
  * task_css_check(true) in pids_can_fork() and pids_cancel_fork() relies
  * on cgroup_threadgroup_change_begin() held by the copy_process().
  */
-static int pids_can_fork(struct task_struct *task)
+static int pids_can_fork(struct task_struct *task, struct css_set *cset)
 {
 	struct cgroup_subsys_state *css;
 	struct pids_cgroup *pids;
 	int err;
 
-	css = task_css_check(current, pids_cgrp_id, true);
+	if (cset)
+		css = cset->subsys[pids_cgrp_id];
+	else
+		css = task_css_check(current, pids_cgrp_id, true);
 	pids = css_pids(css);
 	err = pids_try_charge(pids, 1);
 	if (err) {
@@ -235,12 +239,15 @@ static int pids_can_fork(struct task_struct *task)
 	return err;
 }
 
-static void pids_cancel_fork(struct task_struct *task)
+static void pids_cancel_fork(struct task_struct *task, struct css_set *cset)
 {
 	struct cgroup_subsys_state *css;
 	struct pids_cgroup *pids;
 
-	css = task_css_check(current, pids_cgrp_id, true);
+	if (cset)
+		css = cset->subsys[pids_cgrp_id];
+	else
+		css = task_css_check(current, pids_cgrp_id, true);
 	pids = css_pids(css);
 	pids_uncharge(pids, 1);
 }
diff --git a/kernel/configs/tiny.config b/kernel/configs/tiny.config
index 7fa0c4a..8a44b93 100644
--- a/kernel/configs/tiny.config
+++ b/kernel/configs/tiny.config
@@ -6,7 +6,6 @@
 CONFIG_KERNEL_XZ=y
 # CONFIG_KERNEL_LZO is not set
 # CONFIG_KERNEL_LZ4 is not set
-CONFIG_OPTIMIZE_INLINING=y
 # CONFIG_SLAB is not set
 # CONFIG_SLUB is not set
 CONFIG_SLOB=y
diff --git a/kernel/debug/kdb/.gitignore b/kernel/debug/kdb/.gitignore
index 396d12e..df25954 100644
--- a/kernel/debug/kdb/.gitignore
+++ b/kernel/debug/kdb/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 gen-kdb_cmds.c
diff --git a/kernel/debug/kdb/kdb_main.c b/kernel/debug/kdb/kdb_main.c
index ba12e9f..515379c 100644
--- a/kernel/debug/kdb/kdb_main.c
+++ b/kernel/debug/kdb/kdb_main.c
@@ -399,6 +399,13 @@ int kdb_set(int argc, const char **argv)
 		return KDB_ARGCOUNT;
 
 	/*
+	 * Censor sensitive variables
+	 */
+	if (strcmp(argv[1], "PROMPT") == 0 &&
+	    !kdb_check_flags(KDB_ENABLE_MEM_READ, kdb_cmd_enabled, false))
+		return KDB_NOPERM;
+
+	/*
 	 * Check for internal variables
 	 */
 	if (strcmp(argv[1], "KDBDEBUG") == 0) {
@@ -1102,12 +1109,12 @@ static int handle_ctrl_cmd(char *cmd)
 	case CTRL_P:
 		if (cmdptr != cmd_tail)
 			cmdptr = (cmdptr-1) % KDB_CMD_HISTORY_COUNT;
-		strncpy(cmd_cur, cmd_hist[cmdptr], CMD_BUFLEN);
+		strscpy(cmd_cur, cmd_hist[cmdptr], CMD_BUFLEN);
 		return 1;
 	case CTRL_N:
 		if (cmdptr != cmd_head)
 			cmdptr = (cmdptr+1) % KDB_CMD_HISTORY_COUNT;
-		strncpy(cmd_cur, cmd_hist[cmdptr], CMD_BUFLEN);
+		strscpy(cmd_cur, cmd_hist[cmdptr], CMD_BUFLEN);
 		return 1;
 	}
 	return 0;
@@ -1298,12 +1305,9 @@ static int kdb_local(kdb_reason_t reason, int error, struct pt_regs *regs,
 		*(cmd_hist[cmd_head]) = '\0';
 
 do_full_getstr:
-#if defined(CONFIG_SMP)
+		/* PROMPT can only be set if we have MEM_READ permission. */
 		snprintf(kdb_prompt_str, CMD_BUFLEN, kdbgetenv("PROMPT"),
 			 raw_smp_processor_id());
-#else
-		snprintf(kdb_prompt_str, CMD_BUFLEN, kdbgetenv("PROMPT"));
-#endif
 		if (defcmd_in_progress)
 			strncat(kdb_prompt_str, "[defcmd]", CMD_BUFLEN);
 
@@ -1314,7 +1318,7 @@ static int kdb_local(kdb_reason_t reason, int error, struct pt_regs *regs,
 		if (*cmdbuf != '\n') {
 			if (*cmdbuf < 32) {
 				if (cmdptr == cmd_head) {
-					strncpy(cmd_hist[cmd_head], cmd_cur,
+					strscpy(cmd_hist[cmd_head], cmd_cur,
 						CMD_BUFLEN);
 					*(cmd_hist[cmd_head] +
 					  strlen(cmd_hist[cmd_head])-1) = '\0';
@@ -1324,7 +1328,7 @@ static int kdb_local(kdb_reason_t reason, int error, struct pt_regs *regs,
 				cmdbuf = cmd_cur;
 				goto do_full_getstr;
 			} else {
-				strncpy(cmd_hist[cmd_head], cmd_cur,
+				strscpy(cmd_hist[cmd_head], cmd_cur,
 					CMD_BUFLEN);
 			}
 
diff --git a/kernel/dma/coherent.c b/kernel/dma/coherent.c
index 551b0eb..2a0c498 100644
--- a/kernel/dma/coherent.c
+++ b/kernel/dma/coherent.c
@@ -134,7 +134,7 @@ static void *__dma_alloc_from_coherent(struct device *dev,
 
 	spin_lock_irqsave(&mem->spinlock, flags);
 
-	if (unlikely(size > (mem->size << PAGE_SHIFT)))
+	if (unlikely(size > ((dma_addr_t)mem->size << PAGE_SHIFT)))
 		goto err;
 
 	pageno = bitmap_find_free_region(mem->bitmap, mem->size, order);
@@ -144,8 +144,9 @@ static void *__dma_alloc_from_coherent(struct device *dev,
 	/*
 	 * Memory was found in the coherent area.
 	 */
-	*dma_handle = dma_get_device_base(dev, mem) + (pageno << PAGE_SHIFT);
-	ret = mem->virt_base + (pageno << PAGE_SHIFT);
+	*dma_handle = dma_get_device_base(dev, mem) +
+			((dma_addr_t)pageno << PAGE_SHIFT);
+	ret = mem->virt_base + ((dma_addr_t)pageno << PAGE_SHIFT);
 	spin_unlock_irqrestore(&mem->spinlock, flags);
 	memset(ret, 0, size);
 	return ret;
@@ -194,7 +195,7 @@ static int __dma_release_from_coherent(struct dma_coherent_mem *mem,
 				       int order, void *vaddr)
 {
 	if (mem && vaddr >= mem->virt_base && vaddr <
-		   (mem->virt_base + (mem->size << PAGE_SHIFT))) {
+		   (mem->virt_base + ((dma_addr_t)mem->size << PAGE_SHIFT))) {
 		int page = (vaddr - mem->virt_base) >> PAGE_SHIFT;
 		unsigned long flags;
 
@@ -238,10 +239,10 @@ static int __dma_mmap_from_coherent(struct dma_coherent_mem *mem,
 		struct vm_area_struct *vma, void *vaddr, size_t size, int *ret)
 {
 	if (mem && vaddr >= mem->virt_base && vaddr + size <=
-		   (mem->virt_base + (mem->size << PAGE_SHIFT))) {
+		   (mem->virt_base + ((dma_addr_t)mem->size << PAGE_SHIFT))) {
 		unsigned long off = vma->vm_pgoff;
 		int start = (vaddr - mem->virt_base) >> PAGE_SHIFT;
-		int user_count = vma_pages(vma);
+		unsigned long user_count = vma_pages(vma);
 		int count = PAGE_ALIGN(size) >> PAGE_SHIFT;
 
 		*ret = -ENXIO;
diff --git a/kernel/dma/debug.c b/kernel/dma/debug.c
index 2031ed1..9e1777c 100644
--- a/kernel/dma/debug.c
+++ b/kernel/dma/debug.c
@@ -137,9 +137,12 @@ static const char *const maperr2str[] = {
 	[MAP_ERR_CHECKED] = "dma map error checked",
 };
 
-static const char *type2name[5] = { "single", "page",
-				    "scather-gather", "coherent",
-				    "resource" };
+static const char *type2name[] = {
+	[dma_debug_single] = "single",
+	[dma_debug_sg] = "scather-gather",
+	[dma_debug_coherent] = "coherent",
+	[dma_debug_resource] = "resource",
+};
 
 static const char *dir2name[4] = { "DMA_BIDIRECTIONAL", "DMA_TO_DEVICE",
 				   "DMA_FROM_DEVICE", "DMA_NONE" };
diff --git a/kernel/dma/direct.c b/kernel/dma/direct.c
index ac7956c..8f4bbda 100644
--- a/kernel/dma/direct.c
+++ b/kernel/dma/direct.c
@@ -39,7 +39,8 @@ static inline struct page *dma_direct_to_page(struct device *dev,
 
 u64 dma_direct_get_required_mask(struct device *dev)
 {
-	u64 max_dma = phys_to_dma_direct(dev, (max_pfn - 1) << PAGE_SHIFT);
+	phys_addr_t phys = (phys_addr_t)(max_pfn - 1) << PAGE_SHIFT;
+	u64 max_dma = phys_to_dma_direct(dev, phys);
 
 	return (1ULL << (fls64(max_dma) - 1)) * 2 - 1;
 }
@@ -157,11 +158,8 @@ void *dma_direct_alloc_pages(struct device *dev, size_t size,
 		ret = dma_common_contiguous_remap(page, PAGE_ALIGN(size),
 				dma_pgprot(dev, PAGE_KERNEL, attrs),
 				__builtin_return_address(0));
-		if (!ret) {
-			dma_free_contiguous(dev, page, size);
-			return ret;
-		}
-
+		if (!ret)
+			goto out_free_pages;
 		memset(ret, 0, size);
 		goto done;
 	}
@@ -174,8 +172,7 @@ void *dma_direct_alloc_pages(struct device *dev, size_t size,
 		 * so log an error and fail.
 		 */
 		dev_info(dev, "Rejecting highmem page from CMA.\n");
-		dma_free_contiguous(dev, page, size);
-		return NULL;
+		goto out_free_pages;
 	}
 
 	ret = page_address(page);
@@ -184,10 +181,12 @@ void *dma_direct_alloc_pages(struct device *dev, size_t size,
 
 	memset(ret, 0, size);
 
-	if (IS_ENABLED(CONFIG_ARCH_HAS_UNCACHED_SEGMENT) &&
+	if (IS_ENABLED(CONFIG_ARCH_HAS_DMA_SET_UNCACHED) &&
 	    dma_alloc_need_uncached(dev, attrs)) {
 		arch_dma_prep_coherent(page, size);
-		ret = uncached_kernel_address(ret);
+		ret = arch_dma_set_uncached(ret, size);
+		if (IS_ERR(ret))
+			goto out_free_pages;
 	}
 done:
 	if (force_dma_unencrypted(dev))
@@ -195,6 +194,9 @@ void *dma_direct_alloc_pages(struct device *dev, size_t size,
 	else
 		*dma_handle = phys_to_dma(dev, page_to_phys(page));
 	return ret;
+out_free_pages:
+	dma_free_contiguous(dev, page, size);
+	return NULL;
 }
 
 void dma_direct_free_pages(struct device *dev, size_t size, void *cpu_addr,
@@ -218,6 +220,8 @@ void dma_direct_free_pages(struct device *dev, size_t size, void *cpu_addr,
 
 	if (IS_ENABLED(CONFIG_DMA_REMAP) && is_vmalloc_addr(cpu_addr))
 		vunmap(cpu_addr);
+	else if (IS_ENABLED(CONFIG_ARCH_HAS_DMA_CLEAR_UNCACHED))
+		arch_dma_clear_uncached(cpu_addr, size);
 
 	dma_free_contiguous(dev, dma_direct_to_page(dev, dma_addr), size);
 }
@@ -225,7 +229,7 @@ void dma_direct_free_pages(struct device *dev, size_t size, void *cpu_addr,
 void *dma_direct_alloc(struct device *dev, size_t size,
 		dma_addr_t *dma_handle, gfp_t gfp, unsigned long attrs)
 {
-	if (!IS_ENABLED(CONFIG_ARCH_HAS_UNCACHED_SEGMENT) &&
+	if (!IS_ENABLED(CONFIG_ARCH_HAS_DMA_SET_UNCACHED) &&
 	    !IS_ENABLED(CONFIG_DMA_DIRECT_REMAP) &&
 	    dma_alloc_need_uncached(dev, attrs))
 		return arch_dma_alloc(dev, size, dma_handle, gfp, attrs);
@@ -235,7 +239,7 @@ void *dma_direct_alloc(struct device *dev, size_t size,
 void dma_direct_free(struct device *dev, size_t size,
 		void *cpu_addr, dma_addr_t dma_addr, unsigned long attrs)
 {
-	if (!IS_ENABLED(CONFIG_ARCH_HAS_UNCACHED_SEGMENT) &&
+	if (!IS_ENABLED(CONFIG_ARCH_HAS_DMA_SET_UNCACHED) &&
 	    !IS_ENABLED(CONFIG_DMA_DIRECT_REMAP) &&
 	    dma_alloc_need_uncached(dev, attrs))
 		arch_dma_free(dev, size, cpu_addr, dma_addr, attrs);
diff --git a/kernel/events/core.c b/kernel/events/core.c
index e1459df7..bc9b98a 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -28,6 +28,7 @@
 #include <linux/export.h>
 #include <linux/vmalloc.h>
 #include <linux/hardirq.h>
+#include <linux/hugetlb.h>
 #include <linux/rculist.h>
 #include <linux/uaccess.h>
 #include <linux/syscalls.h>
@@ -387,6 +388,7 @@ static atomic_t nr_freq_events __read_mostly;
 static atomic_t nr_switch_events __read_mostly;
 static atomic_t nr_ksymbol_events __read_mostly;
 static atomic_t nr_bpf_events __read_mostly;
+static atomic_t nr_cgroup_events __read_mostly;
 
 static LIST_HEAD(pmus);
 static DEFINE_MUTEX(pmus_lock);
@@ -981,16 +983,10 @@ perf_cgroup_set_shadow_time(struct perf_event *event, u64 now)
 	event->shadow_ctx_time = now - t->timestamp;
 }
 
-/*
- * Update cpuctx->cgrp so that it is set when first cgroup event is added and
- * cleared when last cgroup event is removed.
- */
 static inline void
-list_update_cgroup_event(struct perf_event *event,
-			 struct perf_event_context *ctx, bool add)
+perf_cgroup_event_enable(struct perf_event *event, struct perf_event_context *ctx)
 {
 	struct perf_cpu_context *cpuctx;
-	struct list_head *cpuctx_entry;
 
 	if (!is_cgroup_event(event))
 		return;
@@ -1007,28 +1003,41 @@ list_update_cgroup_event(struct perf_event *event,
 	 * because if the first would mismatch, the second would not try again
 	 * and we would leave cpuctx->cgrp unset.
 	 */
-	if (add && !cpuctx->cgrp) {
+	if (ctx->is_active && !cpuctx->cgrp) {
 		struct perf_cgroup *cgrp = perf_cgroup_from_task(current, ctx);
 
 		if (cgroup_is_descendant(cgrp->css.cgroup, event->cgrp->css.cgroup))
 			cpuctx->cgrp = cgrp;
 	}
 
-	if (add && ctx->nr_cgroups++)
-		return;
-	else if (!add && --ctx->nr_cgroups)
+	if (ctx->nr_cgroups++)
 		return;
 
-	/* no cgroup running */
-	if (!add)
+	list_add(&cpuctx->cgrp_cpuctx_entry,
+			per_cpu_ptr(&cgrp_cpuctx_list, event->cpu));
+}
+
+static inline void
+perf_cgroup_event_disable(struct perf_event *event, struct perf_event_context *ctx)
+{
+	struct perf_cpu_context *cpuctx;
+
+	if (!is_cgroup_event(event))
+		return;
+
+	/*
+	 * Because cgroup events are always per-cpu events,
+	 * @ctx == &cpuctx->ctx.
+	 */
+	cpuctx = container_of(ctx, struct perf_cpu_context, ctx);
+
+	if (--ctx->nr_cgroups)
+		return;
+
+	if (ctx->is_active && cpuctx->cgrp)
 		cpuctx->cgrp = NULL;
 
-	cpuctx_entry = &cpuctx->cgrp_cpuctx_entry;
-	if (add)
-		list_add(cpuctx_entry,
-			 per_cpu_ptr(&cgrp_cpuctx_list, event->cpu));
-	else
-		list_del(cpuctx_entry);
+	list_del(&cpuctx->cgrp_cpuctx_entry);
 }
 
 #else /* !CONFIG_CGROUP_PERF */
@@ -1094,11 +1103,14 @@ static inline u64 perf_cgroup_event_time(struct perf_event *event)
 }
 
 static inline void
-list_update_cgroup_event(struct perf_event *event,
-			 struct perf_event_context *ctx, bool add)
+perf_cgroup_event_enable(struct perf_event *event, struct perf_event_context *ctx)
 {
 }
 
+static inline void
+perf_cgroup_event_disable(struct perf_event *event, struct perf_event_context *ctx)
+{
+}
 #endif
 
 /*
@@ -1789,13 +1801,14 @@ list_add_event(struct perf_event *event, struct perf_event_context *ctx)
 		add_event_to_groups(event, ctx);
 	}
 
-	list_update_cgroup_event(event, ctx, true);
-
 	list_add_rcu(&event->event_entry, &ctx->event_list);
 	ctx->nr_events++;
 	if (event->attr.inherit_stat)
 		ctx->nr_stat++;
 
+	if (event->state > PERF_EVENT_STATE_OFF)
+		perf_cgroup_event_enable(event, ctx);
+
 	ctx->generation++;
 }
 
@@ -1861,6 +1874,9 @@ static void __perf_event_header_size(struct perf_event *event, u64 sample_type)
 	if (sample_type & PERF_SAMPLE_PHYS_ADDR)
 		size += sizeof(data->phys_addr);
 
+	if (sample_type & PERF_SAMPLE_CGROUP)
+		size += sizeof(data->cgroup);
+
 	event->header_size = size;
 }
 
@@ -1971,8 +1987,6 @@ list_del_event(struct perf_event *event, struct perf_event_context *ctx)
 
 	event->attach_state &= ~PERF_ATTACH_CONTEXT;
 
-	list_update_cgroup_event(event, ctx, false);
-
 	ctx->nr_events--;
 	if (event->attr.inherit_stat)
 		ctx->nr_stat--;
@@ -1989,8 +2003,10 @@ list_del_event(struct perf_event *event, struct perf_event_context *ctx)
 	 * of error state is by explicit re-enabling
 	 * of the event
 	 */
-	if (event->state > PERF_EVENT_STATE_OFF)
+	if (event->state > PERF_EVENT_STATE_OFF) {
+		perf_cgroup_event_disable(event, ctx);
 		perf_event_set_state(event, PERF_EVENT_STATE_OFF);
+	}
 
 	ctx->generation++;
 }
@@ -2221,6 +2237,7 @@ event_sched_out(struct perf_event *event,
 
 	if (READ_ONCE(event->pending_disable) >= 0) {
 		WRITE_ONCE(event->pending_disable, -1);
+		perf_cgroup_event_disable(event, ctx);
 		state = PERF_EVENT_STATE_OFF;
 	}
 	perf_event_set_state(event, state);
@@ -2358,6 +2375,7 @@ static void __perf_event_disable(struct perf_event *event,
 		event_sched_out(event, cpuctx, ctx);
 
 	perf_event_set_state(event, PERF_EVENT_STATE_OFF);
+	perf_cgroup_event_disable(event, ctx);
 }
 
 /*
@@ -2741,7 +2759,7 @@ static int  __perf_install_in_context(void *info)
 	}
 
 #ifdef CONFIG_CGROUP_PERF
-	if (is_cgroup_event(event)) {
+	if (event->state > PERF_EVENT_STATE_OFF && is_cgroup_event(event)) {
 		/*
 		 * If the current cgroup doesn't match the event's
 		 * cgroup, we should not try to schedule it.
@@ -2901,6 +2919,7 @@ static void __perf_event_enable(struct perf_event *event,
 		ctx_sched_out(ctx, cpuctx, EVENT_TIME);
 
 	perf_event_set_state(event, PERF_EVENT_STATE_INACTIVE);
+	perf_cgroup_event_enable(event, ctx);
 
 	if (!ctx->is_active)
 		return;
@@ -3503,7 +3522,8 @@ static void cpu_ctx_sched_out(struct perf_cpu_context *cpuctx,
 
 static bool perf_less_group_idx(const void *l, const void *r)
 {
-	const struct perf_event *le = l, *re = r;
+	const struct perf_event *le = *(const struct perf_event **)l;
+	const struct perf_event *re = *(const struct perf_event **)r;
 
 	return le->group_index < re->group_index;
 }
@@ -3611,8 +3631,10 @@ static int merge_sched_in(struct perf_event *event, void *data)
 	}
 
 	if (event->state == PERF_EVENT_STATE_INACTIVE) {
-		if (event->attr.pinned)
+		if (event->attr.pinned) {
+			perf_cgroup_event_disable(event, ctx);
 			perf_event_set_state(event, PERF_EVENT_STATE_ERROR);
+		}
 
 		*can_add_hw = 0;
 		ctx->rotate_necessary = 1;
@@ -4608,6 +4630,8 @@ static void unaccount_event(struct perf_event *event)
 		atomic_dec(&nr_comm_events);
 	if (event->attr.namespaces)
 		atomic_dec(&nr_namespaces_events);
+	if (event->attr.cgroup)
+		atomic_dec(&nr_cgroup_events);
 	if (event->attr.task)
 		atomic_dec(&nr_task_events);
 	if (event->attr.freq)
@@ -6864,6 +6888,9 @@ void perf_output_sample(struct perf_output_handle *handle,
 	if (sample_type & PERF_SAMPLE_PHYS_ADDR)
 		perf_output_put(handle, data->phys_addr);
 
+	if (sample_type & PERF_SAMPLE_CGROUP)
+		perf_output_put(handle, data->cgroup);
+
 	if (sample_type & PERF_SAMPLE_AUX) {
 		perf_output_put(handle, data->aux_size);
 
@@ -6907,9 +6934,12 @@ static u64 perf_virt_to_phys(u64 virt)
 		 * Try IRQ-safe __get_user_pages_fast first.
 		 * If failed, leave phys_addr as 0.
 		 */
-		if ((current->mm != NULL) &&
-		    (__get_user_pages_fast(virt, 1, 0, &p) == 1))
-			phys_addr = page_to_phys(p) + virt % PAGE_SIZE;
+		if (current->mm != NULL) {
+			pagefault_disable();
+			if (__get_user_pages_fast(virt, 1, 0, &p) == 1)
+				phys_addr = page_to_phys(p) + virt % PAGE_SIZE;
+			pagefault_enable();
+		}
 
 		if (p)
 			put_page(p);
@@ -7063,6 +7093,16 @@ void perf_prepare_sample(struct perf_event_header *header,
 	if (sample_type & PERF_SAMPLE_PHYS_ADDR)
 		data->phys_addr = perf_virt_to_phys(data->addr);
 
+#ifdef CONFIG_CGROUP_PERF
+	if (sample_type & PERF_SAMPLE_CGROUP) {
+		struct cgroup *cgrp;
+
+		/* protected by RCU */
+		cgrp = task_css_check(current, perf_event_cgrp_id, 1)->cgroup;
+		data->cgroup = cgroup_id(cgrp);
+	}
+#endif
+
 	if (sample_type & PERF_SAMPLE_AUX) {
 		u64 size;
 
@@ -7736,6 +7776,105 @@ void perf_event_namespaces(struct task_struct *task)
 }
 
 /*
+ * cgroup tracking
+ */
+#ifdef CONFIG_CGROUP_PERF
+
+struct perf_cgroup_event {
+	char				*path;
+	int				path_size;
+	struct {
+		struct perf_event_header	header;
+		u64				id;
+		char				path[];
+	} event_id;
+};
+
+static int perf_event_cgroup_match(struct perf_event *event)
+{
+	return event->attr.cgroup;
+}
+
+static void perf_event_cgroup_output(struct perf_event *event, void *data)
+{
+	struct perf_cgroup_event *cgroup_event = data;
+	struct perf_output_handle handle;
+	struct perf_sample_data sample;
+	u16 header_size = cgroup_event->event_id.header.size;
+	int ret;
+
+	if (!perf_event_cgroup_match(event))
+		return;
+
+	perf_event_header__init_id(&cgroup_event->event_id.header,
+				   &sample, event);
+	ret = perf_output_begin(&handle, event,
+				cgroup_event->event_id.header.size);
+	if (ret)
+		goto out;
+
+	perf_output_put(&handle, cgroup_event->event_id);
+	__output_copy(&handle, cgroup_event->path, cgroup_event->path_size);
+
+	perf_event__output_id_sample(event, &handle, &sample);
+
+	perf_output_end(&handle);
+out:
+	cgroup_event->event_id.header.size = header_size;
+}
+
+static void perf_event_cgroup(struct cgroup *cgrp)
+{
+	struct perf_cgroup_event cgroup_event;
+	char path_enomem[16] = "//enomem";
+	char *pathname;
+	size_t size;
+
+	if (!atomic_read(&nr_cgroup_events))
+		return;
+
+	cgroup_event = (struct perf_cgroup_event){
+		.event_id  = {
+			.header = {
+				.type = PERF_RECORD_CGROUP,
+				.misc = 0,
+				.size = sizeof(cgroup_event.event_id),
+			},
+			.id = cgroup_id(cgrp),
+		},
+	};
+
+	pathname = kmalloc(PATH_MAX, GFP_KERNEL);
+	if (pathname == NULL) {
+		cgroup_event.path = path_enomem;
+	} else {
+		/* just to be sure to have enough space for alignment */
+		cgroup_path(cgrp, pathname, PATH_MAX - sizeof(u64));
+		cgroup_event.path = pathname;
+	}
+
+	/*
+	 * Since our buffer works in 8 byte units we need to align our string
+	 * size to a multiple of 8. However, we must guarantee the tail end is
+	 * zero'd out to avoid leaking random bits to userspace.
+	 */
+	size = strlen(cgroup_event.path) + 1;
+	while (!IS_ALIGNED(size, sizeof(u64)))
+		cgroup_event.path[size++] = '\0';
+
+	cgroup_event.event_id.header.size += size;
+	cgroup_event.path_size = size;
+
+	perf_iterate_sb(perf_event_cgroup_output,
+			&cgroup_event,
+			NULL);
+
+	kfree(pathname);
+}
+
+#endif
+
+/*
  * mmap tracking
  */
 
@@ -7855,7 +7994,7 @@ static void perf_event_mmap_event(struct perf_mmap_event *mmap_event)
 		flags |= MAP_EXECUTABLE;
 	if (vma->vm_flags & VM_LOCKED)
 		flags |= MAP_LOCKED;
-	if (vma->vm_flags & VM_HUGETLB)
+	if (is_vm_hugetlb_page(vma))
 		flags |= MAP_HUGETLB;
 
 	if (file) {
@@ -10778,6 +10917,8 @@ static void account_event(struct perf_event *event)
 		atomic_inc(&nr_comm_events);
 	if (event->attr.namespaces)
 		atomic_inc(&nr_namespaces_events);
+	if (event->attr.cgroup)
+		atomic_inc(&nr_cgroup_events);
 	if (event->attr.task)
 		atomic_inc(&nr_task_events);
 	if (event->attr.freq)
@@ -11157,6 +11298,12 @@ static int perf_copy_attr(struct perf_event_attr __user *uattr,
 
 	if (attr->sample_type & PERF_SAMPLE_REGS_INTR)
 		ret = perf_reg_validate(attr->sample_regs_intr);
+
+#ifndef CONFIG_CGROUP_PERF
+	if (attr->sample_type & PERF_SAMPLE_CGROUP)
+		return -EINVAL;
+#endif
+
 out:
 	return ret;
 
@@ -12754,6 +12901,12 @@ static void perf_cgroup_css_free(struct cgroup_subsys_state *css)
 	kfree(jc);
 }
 
+static int perf_cgroup_css_online(struct cgroup_subsys_state *css)
+{
+	perf_event_cgroup(css->cgroup);
+	return 0;
+}
+
 static int __perf_cgroup_move(void *info)
 {
 	struct task_struct *task = info;
@@ -12775,6 +12928,7 @@ static void perf_cgroup_attach(struct cgroup_taskset *tset)
 struct cgroup_subsys perf_event_cgrp_subsys = {
 	.css_alloc	= perf_cgroup_css_alloc,
 	.css_free	= perf_cgroup_css_free,
+	.css_online	= perf_cgroup_css_online,
 	.attach		= perf_cgroup_attach,
 	/*
 	 * Implicitly enable on dfl hierarchy so that perf events can
diff --git a/kernel/extable.c b/kernel/extable.c
index 7681f87..b0ea5eb 100644
--- a/kernel/extable.c
+++ b/kernel/extable.c
@@ -34,7 +34,8 @@ u32 __initdata __visible main_extable_sort_needed = 1;
 /* Sort the kernel's built-in exception table */
 void __init sort_main_extable(void)
 {
-	if (main_extable_sort_needed && __stop___ex_table > __start___ex_table) {
+	if (main_extable_sort_needed &&
+	    &__stop___ex_table > &__start___ex_table) {
 		pr_notice("Sorting __ex_table...\n");
 		sort_extable(__start___ex_table, __stop___ex_table);
 	}
diff --git a/kernel/fork.c b/kernel/fork.c
index ba122d6..8c700f8 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -361,6 +361,7 @@ struct vm_area_struct *vm_area_dup(struct vm_area_struct *orig)
 	if (new) {
 		*new = *orig;
 		INIT_LIST_HEAD(&new->anon_vma_chain);
+		new->vm_next = new->vm_prev = NULL;
 	}
 	return new;
 }
@@ -553,14 +554,15 @@ static __latent_entropy int dup_mmap(struct mm_struct *mm,
 		if (retval)
 			goto fail_nomem_anon_vma_fork;
 		if (tmp->vm_flags & VM_WIPEONFORK) {
-			/* VM_WIPEONFORK gets a clean slate in the child. */
+			/*
+			 * VM_WIPEONFORK gets a clean slate in the child.
+			 * Don't prepare anon_vma until fault since we don't
+			 * copy page for current vma.
+			 */
 			tmp->anon_vma = NULL;
-			if (anon_vma_prepare(tmp))
-				goto fail_nomem_anon_vma_fork;
 		} else if (anon_vma_fork(tmp, mpnt))
 			goto fail_nomem_anon_vma_fork;
 		tmp->vm_flags &= ~(VM_LOCKED | VM_LOCKONFAULT);
-		tmp->vm_next = tmp->vm_prev = NULL;
 		file = tmp->vm_file;
 		if (file) {
 			struct inode *inode = file_inode(file);
@@ -2176,16 +2178,15 @@ static __latent_entropy struct task_struct *copy_process(
 	INIT_LIST_HEAD(&p->thread_group);
 	p->task_works = NULL;
 
-	cgroup_threadgroup_change_begin(current);
 	/*
 	 * Ensure that the cgroup subsystem policies allow the new process to be
 	 * forked. It should be noted the the new process's css_set can be changed
 	 * between here and cgroup_post_fork() if an organisation operation is in
 	 * progress.
 	 */
-	retval = cgroup_can_fork(p);
+	retval = cgroup_can_fork(p, args);
 	if (retval)
-		goto bad_fork_cgroup_threadgroup_change_end;
+		goto bad_fork_put_pidfd;
 
 	/*
 	 * From this point on we must avoid any synchronous user-space
@@ -2290,8 +2291,7 @@ static __latent_entropy struct task_struct *copy_process(
 	write_unlock_irq(&tasklist_lock);
 
 	proc_fork_connector(p);
-	cgroup_post_fork(p);
-	cgroup_threadgroup_change_end(current);
+	cgroup_post_fork(p, args);
 	perf_event_fork(p);
 
 	trace_task_newtask(p, clone_flags);
@@ -2302,9 +2302,7 @@ static __latent_entropy struct task_struct *copy_process(
 bad_fork_cancel_cgroup:
 	spin_unlock(&current->sighand->siglock);
 	write_unlock_irq(&tasklist_lock);
-	cgroup_cancel_fork(p);
-bad_fork_cgroup_threadgroup_change_end:
-	cgroup_threadgroup_change_end(current);
+	cgroup_cancel_fork(p, args);
 bad_fork_put_pidfd:
 	if (clone_flags & CLONE_PIDFD) {
 		fput(pidfile);
@@ -2607,6 +2605,14 @@ noinline static int copy_clone_args_from_user(struct kernel_clone_args *kargs,
 	struct clone_args args;
 	pid_t *kset_tid = kargs->set_tid;
 
+	BUILD_BUG_ON(offsetofend(struct clone_args, tls) !=
+		     CLONE_ARGS_SIZE_VER0);
+	BUILD_BUG_ON(offsetofend(struct clone_args, set_tid_size) !=
+		     CLONE_ARGS_SIZE_VER1);
+	BUILD_BUG_ON(offsetofend(struct clone_args, cgroup) !=
+		     CLONE_ARGS_SIZE_VER2);
+	BUILD_BUG_ON(sizeof(struct clone_args) != CLONE_ARGS_SIZE_VER2);
+
 	if (unlikely(usize > PAGE_SIZE))
 		return -E2BIG;
 	if (unlikely(usize < CLONE_ARGS_SIZE_VER0))
@@ -2633,6 +2639,10 @@ noinline static int copy_clone_args_from_user(struct kernel_clone_args *kargs,
 		     !valid_signal(args.exit_signal)))
 		return -EINVAL;
 
+	if ((args.flags & CLONE_INTO_CGROUP) &&
+	    (args.cgroup > INT_MAX || usize < CLONE_ARGS_SIZE_VER2))
+		return -EINVAL;
+
 	*kargs = (struct kernel_clone_args){
 		.flags		= args.flags,
 		.pidfd		= u64_to_user_ptr(args.pidfd),
@@ -2643,6 +2653,7 @@ noinline static int copy_clone_args_from_user(struct kernel_clone_args *kargs,
 		.stack_size	= args.stack_size,
 		.tls		= args.tls,
 		.set_tid_size	= args.set_tid_size,
+		.cgroup		= args.cgroup,
 	};
 
 	if (args.set_tid &&
@@ -2686,7 +2697,8 @@ static inline bool clone3_stack_valid(struct kernel_clone_args *kargs)
 static bool clone3_args_valid(struct kernel_clone_args *kargs)
 {
 	/* Verify that no unknown flags are passed along. */
-	if (kargs->flags & ~(CLONE_LEGACY_FLAGS | CLONE_CLEAR_SIGHAND))
+	if (kargs->flags &
+	    ~(CLONE_LEGACY_FLAGS | CLONE_CLEAR_SIGHAND | CLONE_INTO_CGROUP))
 		return false;
 
 	/*
diff --git a/kernel/gcov/fs.c b/kernel/gcov/fs.c
index e5eb5ea..82babf5 100644
--- a/kernel/gcov/fs.c
+++ b/kernel/gcov/fs.c
@@ -58,7 +58,7 @@ struct gcov_node {
 	struct dentry *dentry;
 	struct dentry **links;
 	int num_loaded;
-	char name[0];
+	char name[];
 };
 
 static const char objtree[] = OBJTREE;
@@ -108,9 +108,9 @@ static void *gcov_seq_next(struct seq_file *seq, void *data, loff_t *pos)
 {
 	struct gcov_iterator *iter = data;
 
+	(*pos)++;
 	if (gcov_iter_next(iter))
 		return NULL;
-	(*pos)++;
 
 	return iter;
 }
diff --git a/kernel/gcov/gcc_3_4.c b/kernel/gcov/gcc_3_4.c
index 801ee4b..acb8355 100644
--- a/kernel/gcov/gcc_3_4.c
+++ b/kernel/gcov/gcc_3_4.c
@@ -38,7 +38,7 @@ static struct gcov_info *gcov_info_head;
 struct gcov_fn_info {
 	unsigned int ident;
 	unsigned int checksum;
-	unsigned int n_ctrs[0];
+	unsigned int n_ctrs[];
 };
 
 /**
@@ -78,7 +78,7 @@ struct gcov_info {
 	unsigned int			n_functions;
 	const struct gcov_fn_info	*functions;
 	unsigned int			ctr_mask;
-	struct gcov_ctr_info		counts[0];
+	struct gcov_ctr_info		counts[];
 };
 
 /**
@@ -352,7 +352,7 @@ struct gcov_iterator {
 	unsigned int count;
 
 	int num_types;
-	struct type_info type_info[0];
+	struct type_info type_info[];
 };
 
 static struct gcov_fn_info *get_func(struct gcov_iterator *iter)
diff --git a/kernel/gcov/gcc_4_7.c b/kernel/gcov/gcc_4_7.c
index ec37563..908fdf5 100644
--- a/kernel/gcov/gcc_4_7.c
+++ b/kernel/gcov/gcc_4_7.c
@@ -68,7 +68,7 @@ struct gcov_fn_info {
 	unsigned int ident;
 	unsigned int lineno_checksum;
 	unsigned int cfg_checksum;
-	struct gcov_ctr_info ctrs[0];
+	struct gcov_ctr_info ctrs[];
 };
 
 /**
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index fe40c65..453a8a0 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -1690,34 +1690,6 @@ __setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new)
 	return ret;
 }
 
-/**
- *	setup_irq - setup an interrupt
- *	@irq: Interrupt line to setup
- *	@act: irqaction for the interrupt
- *
- * Used to statically setup interrupts in the early boot process.
- */
-int setup_irq(unsigned int irq, struct irqaction *act)
-{
-	int retval;
-	struct irq_desc *desc = irq_to_desc(irq);
-
-	if (!desc || WARN_ON(irq_settings_is_per_cpu_devid(desc)))
-		return -EINVAL;
-
-	retval = irq_chip_pm_get(&desc->irq_data);
-	if (retval < 0)
-		return retval;
-
-	retval = __setup_irq(irq, desc, act);
-
-	if (retval)
-		irq_chip_pm_put(&desc->irq_data);
-
-	return retval;
-}
-EXPORT_SYMBOL_GPL(setup_irq);
-
 /*
  * Internal function to unregister an irqaction - used to free
  * regular and special interrupts that are part of the architecture.
@@ -1859,22 +1831,6 @@ static struct irqaction *__free_irq(struct irq_desc *desc, void *dev_id)
 }
 
 /**
- *	remove_irq - free an interrupt
- *	@irq: Interrupt line to free
- *	@act: irqaction for the interrupt
- *
- * Used to remove interrupts statically setup by the early boot process.
- */
-void remove_irq(unsigned int irq, struct irqaction *act)
-{
-	struct irq_desc *desc = irq_to_desc(irq);
-
-	if (desc && !WARN_ON(irq_settings_is_per_cpu_devid(desc)))
-		__free_irq(desc, act->dev_id);
-}
-EXPORT_SYMBOL_GPL(remove_irq);
-
-/**
  *	free_irq - free an interrupt allocated with request_irq
  *	@irq: Interrupt line to free
  *	@dev_id: Device identity to free
diff --git a/kernel/kallsyms.c b/kernel/kallsyms.c
index a9b3f66..16c8c60 100644
--- a/kernel/kallsyms.c
+++ b/kernel/kallsyms.c
@@ -175,7 +175,6 @@ unsigned long kallsyms_lookup_name(const char *name)
 	}
 	return module_kallsyms_lookup_name(name);
 }
-EXPORT_SYMBOL_GPL(kallsyms_lookup_name);
 
 int kallsyms_on_each_symbol(int (*fn)(void *, const char *, struct module *,
 				      unsigned long),
@@ -194,7 +193,6 @@ int kallsyms_on_each_symbol(int (*fn)(void *, const char *, struct module *,
 	}
 	return module_kallsyms_on_each_symbol(fn, data);
 }
-EXPORT_SYMBOL_GPL(kallsyms_on_each_symbol);
 
 static unsigned long get_symbol_pos(unsigned long addr,
 				    unsigned long *symbolsize,
diff --git a/kernel/kmod.c b/kernel/kmod.c
index bc6addd..37c3c4b 100644
--- a/kernel/kmod.c
+++ b/kernel/kmod.c
@@ -35,7 +35,7 @@
  *		       (u64) THREAD_SIZE * 8UL);
  *
  * If you need less than 50 threads would mean we're dealing with systems
- * smaller than 3200 pages. This assuems you are capable of having ~13M memory,
+ * smaller than 3200 pages. This assumes you are capable of having ~13M memory,
  * and this would only be an be an upper limit, after which the OOM killer
  * would take effect. Systems like these are very unlikely if modules are
  * enabled.
@@ -120,7 +120,7 @@ static int call_modprobe(char *module_name, int wait)
  * invoke it.
  *
  * If module auto-loading support is disabled then this function
- * becomes a no-operation.
+ * simply returns -ENOENT.
  */
 int __request_module(bool wait, const char *fmt, ...)
 {
@@ -137,7 +137,7 @@ int __request_module(bool wait, const char *fmt, ...)
 	WARN_ON_ONCE(wait && current_is_async());
 
 	if (!modprobe_path[0])
-		return 0;
+		return -ENOENT;
 
 	va_start(args, fmt);
 	ret = vsnprintf(module_name, MODULE_NAME_LEN, fmt, args);
diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c
index 1511690..ac10db6 100644
--- a/kernel/locking/lockdep.c
+++ b/kernel/locking/lockdep.c
@@ -3952,10 +3952,36 @@ static int mark_lock(struct task_struct *curr, struct held_lock *this,
 	return ret;
 }
 
+static inline short task_wait_context(struct task_struct *curr)
+{
+	/*
+	 * Set appropriate wait type for the context; for IRQs we have to take
+	 * into account force_irqthread as that is implied by PREEMPT_RT.
+	 */
+	if (curr->hardirq_context) {
+		/*
+		 * Check if force_irqthreads will run us threaded.
+		 */
+		if (curr->hardirq_threaded || curr->irq_config)
+			return LD_WAIT_CONFIG;
+
+		return LD_WAIT_SPIN;
+	} else if (curr->softirq_context) {
+		/*
+		 * Softirqs are always threaded.
+		 */
+		return LD_WAIT_CONFIG;
+	}
+
+	return LD_WAIT_MAX;
+}
+
 static int
 print_lock_invalid_wait_context(struct task_struct *curr,
 				struct held_lock *hlock)
 {
+	short curr_inner;
+
 	if (!debug_locks_off())
 		return 0;
 	if (debug_locks_silent)
@@ -3971,6 +3997,10 @@ print_lock_invalid_wait_context(struct task_struct *curr,
 	print_lock(hlock);
 
 	pr_warn("other info that might help us debug this:\n");
+
+	curr_inner = task_wait_context(curr);
+	pr_warn("context-{%d:%d}\n", curr_inner, curr_inner);
+
 	lockdep_print_held_locks(curr);
 
 	pr_warn("stack backtrace:\n");
@@ -4017,26 +4047,7 @@ static int check_wait_context(struct task_struct *curr, struct held_lock *next)
 	}
 	depth++;
 
-	/*
-	 * Set appropriate wait type for the context; for IRQs we have to take
-	 * into account force_irqthread as that is implied by PREEMPT_RT.
-	 */
-	if (curr->hardirq_context) {
-		/*
-		 * Check if force_irqthreads will run us threaded.
-		 */
-		if (curr->hardirq_threaded || curr->irq_config)
-			curr_inner = LD_WAIT_CONFIG;
-		else
-			curr_inner = LD_WAIT_SPIN;
-	} else if (curr->softirq_context) {
-		/*
-		 * Softirqs are always threaded.
-		 */
-		curr_inner = LD_WAIT_CONFIG;
-	} else {
-		curr_inner = LD_WAIT_MAX;
-	}
+	curr_inner = task_wait_context(curr);
 
 	for (; depth < curr->lockdep_depth; depth++) {
 		struct held_lock *prev = curr->held_locks + depth;
diff --git a/kernel/locking/percpu-rwsem.c b/kernel/locking/percpu-rwsem.c
index a008a1b..8bbafe3 100644
--- a/kernel/locking/percpu-rwsem.c
+++ b/kernel/locking/percpu-rwsem.c
@@ -118,14 +118,15 @@ static int percpu_rwsem_wake_function(struct wait_queue_entry *wq_entry,
 				      unsigned int mode, int wake_flags,
 				      void *key)
 {
-	struct task_struct *p = get_task_struct(wq_entry->private);
 	bool reader = wq_entry->flags & WQ_FLAG_CUSTOM;
 	struct percpu_rw_semaphore *sem = key;
+	struct task_struct *p;
 
 	/* concurrent against percpu_down_write(), can get stolen */
 	if (!__percpu_rwsem_trylock(sem, reader))
 		return 1;
 
+	p = get_task_struct(wq_entry->private);
 	list_del_init(&wq_entry->entry);
 	smp_store_release(&wq_entry->private, NULL);
 
diff --git a/kernel/module.c b/kernel/module.c
index 33569a0..646f1e2 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -1515,7 +1515,7 @@ struct module_sect_attr {
 struct module_sect_attrs {
 	struct attribute_group grp;
 	unsigned int nsections;
-	struct module_sect_attr attrs[0];
+	struct module_sect_attr attrs[];
 };
 
 static ssize_t module_sect_show(struct module_attribute *mattr,
@@ -1608,7 +1608,7 @@ static void remove_sect_attrs(struct module *mod)
 struct module_notes_attrs {
 	struct kobject *dir;
 	unsigned int notes;
-	struct bin_attribute attrs[0];
+	struct bin_attribute attrs[];
 };
 
 static ssize_t module_notes_read(struct file *filp, struct kobject *kobj,
@@ -4355,6 +4355,7 @@ static int modules_open(struct inode *inode, struct file *file)
 }
 
 static const struct proc_ops modules_proc_ops = {
+	.proc_flags	= PROC_ENTRY_PERMANENT,
 	.proc_open	= modules_open,
 	.proc_read	= seq_read,
 	.proc_lseek	= seq_lseek,
diff --git a/kernel/pid.c b/kernel/pid.c
index bc21c0f..c835b84 100644
--- a/kernel/pid.c
+++ b/kernel/pid.c
@@ -256,6 +256,7 @@ struct pid *alloc_pid(struct pid_namespace *ns, pid_t *set_tid,
 
 	get_pid_ns(ns);
 	refcount_set(&pid->count, 1);
+	spin_lock_init(&pid->lock);
 	for (type = 0; type < PIDTYPE_MAX; ++type)
 		INIT_HLIST_HEAD(&pid->tasks[type]);
 
diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
index 7cbfbea..c208566 100644
--- a/kernel/power/Kconfig
+++ b/kernel/power/Kconfig
@@ -80,9 +80,6 @@
 
 	  For more information take a look at <file:Documentation/power/swsusp.rst>.
 
-config ARCH_SAVE_PAGE_KEYS
-	bool
-
 config PM_STD_PARTITION
 	string "Default resume partition"
 	depends on HIBERNATION
diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c
index 6dbeedb..86aba87 100644
--- a/kernel/power/hibernate.c
+++ b/kernel/power/hibernate.c
@@ -678,7 +678,7 @@ static int load_image_and_restore(void)
 	error = swsusp_read(&flags);
 	swsusp_close(FMODE_READ);
 	if (!error)
-		hibernation_restore(flags & SF_PLATFORM_MODE);
+		error = hibernation_restore(flags & SF_PLATFORM_MODE);
 
 	pr_err("Failed to load image, recovering.\n");
 	swsusp_free();
diff --git a/kernel/power/main.c b/kernel/power/main.c
index 69b7a8a..40f86ec 100644
--- a/kernel/power/main.c
+++ b/kernel/power/main.c
@@ -535,6 +535,13 @@ static ssize_t pm_debug_messages_store(struct kobject *kobj,
 
 power_attr(pm_debug_messages);
 
+static int __init pm_debug_messages_setup(char *str)
+{
+	pm_debug_messages_on = true;
+	return 1;
+}
+__setup("pm_debug_messages", pm_debug_messages_setup);
+
 /**
  * __pm_pr_dbg - Print a suspend debug message to the kernel log.
  * @defer: Whether or not to use printk_deferred() to print the message.
diff --git a/kernel/power/snapshot.c b/kernel/power/snapshot.c
index d82b7b8..6598001 100644
--- a/kernel/power/snapshot.c
+++ b/kernel/power/snapshot.c
@@ -1744,9 +1744,6 @@ int hibernate_preallocate_memory(void)
 	count += highmem;
 	count -= totalreserve_pages;
 
-	/* Add number of pages required for page keys (s390 only). */
-	size += page_key_additional_pages(saveable);
-
 	/* Compute the maximum number of saveable pages to leave in memory. */
 	max_size = (count - (size + PAGES_FOR_IO)) / 2
 			- 2 * DIV_ROUND_UP(reserved_size, PAGE_SIZE);
@@ -2075,8 +2072,6 @@ static inline void pack_pfns(unsigned long *buf, struct memory_bitmap *bm)
 		buf[j] = memory_bm_next_pfn(bm);
 		if (unlikely(buf[j] == BM_END_OF_MAP))
 			break;
-		/* Save page key for data page (s390 only). */
-		page_key_read(buf + j);
 	}
 }
 
@@ -2226,9 +2221,6 @@ static int unpack_orig_pfns(unsigned long *buf, struct memory_bitmap *bm)
 		if (unlikely(buf[j] == BM_END_OF_MAP))
 			break;
 
-		/* Extract and buffer page key for data page (s390 only). */
-		page_key_memorize(buf + j);
-
 		if (pfn_valid(buf[j]) && memory_bm_pfn_present(bm, buf[j]))
 			memory_bm_set_bit(bm, buf[j]);
 		else
@@ -2623,11 +2615,6 @@ int snapshot_write_next(struct snapshot_handle *handle)
 		if (error)
 			return error;
 
-		/* Allocate buffer for page keys. */
-		error = page_key_alloc(nr_copy_pages);
-		if (error)
-			return error;
-
 		hibernate_restore_protection_begin();
 	} else if (handle->cur <= nr_meta_pages + 1) {
 		error = unpack_orig_pfns(buffer, &copy_bm);
@@ -2649,8 +2636,6 @@ int snapshot_write_next(struct snapshot_handle *handle)
 		}
 	} else {
 		copy_last_highmem_page();
-		/* Restore page key for data page (s390 only). */
-		page_key_write(handle->buffer);
 		hibernate_restore_protect_page(handle->buffer);
 		handle->buffer = get_buffer(&orig_bm, &ca);
 		if (IS_ERR(handle->buffer))
@@ -2673,9 +2658,6 @@ int snapshot_write_next(struct snapshot_handle *handle)
 void snapshot_write_finalize(struct snapshot_handle *handle)
 {
 	copy_last_highmem_page();
-	/* Restore page key for data page (s390 only). */
-	page_key_write(handle->buffer);
-	page_key_free();
 	hibernate_restore_protect_page(handle->buffer);
 	/* Do that only if we have loaded the image entirely */
 	if (handle->cur > 1 && handle->cur > nr_meta_pages + nr_copy_pages) {
diff --git a/kernel/power/user.c b/kernel/power/user.c
index 58ed947..7959449 100644
--- a/kernel/power/user.c
+++ b/kernel/power/user.c
@@ -27,8 +27,6 @@
 #include "power.h"
 
 
-#define SNAPSHOT_MINOR	231
-
 static struct snapshot_data {
 	struct snapshot_handle handle;
 	int swap;
@@ -198,6 +196,50 @@ static ssize_t snapshot_write(struct file *filp, const char __user *buf,
 	return res;
 }
 
+struct compat_resume_swap_area {
+	compat_loff_t offset;
+	u32 dev;
+} __packed;
+
+static int snapshot_set_swap_area(struct snapshot_data *data,
+		void __user *argp)
+{
+	sector_t offset;
+	dev_t swdev;
+
+	if (swsusp_swap_in_use())
+		return -EPERM;
+
+	if (in_compat_syscall()) {
+		struct compat_resume_swap_area swap_area;
+
+		if (copy_from_user(&swap_area, argp, sizeof(swap_area)))
+			return -EFAULT;
+		swdev = new_decode_dev(swap_area.dev);
+		offset = swap_area.offset;
+	} else {
+		struct resume_swap_area swap_area;
+
+		if (copy_from_user(&swap_area, argp, sizeof(swap_area)))
+			return -EFAULT;
+		swdev = new_decode_dev(swap_area.dev);
+		offset = swap_area.offset;
+	}
+
+	/*
+	 * User space encodes device types as two-byte values,
+	 * so we need to recode them
+	 */
+	if (!swdev) {
+		data->swap = -1;
+		return -EINVAL;
+	}
+	data->swap = swap_type_of(swdev, offset, NULL);
+	if (data->swap < 0)
+		return -ENODEV;
+	return 0;
+}
+
 static long snapshot_ioctl(struct file *filp, unsigned int cmd,
 							unsigned long arg)
 {
@@ -353,34 +395,7 @@ static long snapshot_ioctl(struct file *filp, unsigned int cmd,
 		break;
 
 	case SNAPSHOT_SET_SWAP_AREA:
-		if (swsusp_swap_in_use()) {
-			error = -EPERM;
-		} else {
-			struct resume_swap_area swap_area;
-			dev_t swdev;
-
-			error = copy_from_user(&swap_area, (void __user *)arg,
-					sizeof(struct resume_swap_area));
-			if (error) {
-				error = -EFAULT;
-				break;
-			}
-
-			/*
-			 * User space encodes device types as two-byte values,
-			 * so we need to recode them
-			 */
-			swdev = new_decode_dev(swap_area.dev);
-			if (swdev) {
-				offset = swap_area.offset;
-				data->swap = swap_type_of(swdev, offset, NULL);
-				if (data->swap < 0)
-					error = -ENODEV;
-			} else {
-				data->swap = -1;
-				error = -EINVAL;
-			}
-		}
+		error = snapshot_set_swap_area(data, (void __user *)arg);
 		break;
 
 	default:
@@ -395,12 +410,6 @@ static long snapshot_ioctl(struct file *filp, unsigned int cmd,
 }
 
 #ifdef CONFIG_COMPAT
-
-struct compat_resume_swap_area {
-	compat_loff_t offset;
-	u32 dev;
-} __packed;
-
 static long
 snapshot_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
@@ -411,33 +420,13 @@ snapshot_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	case SNAPSHOT_AVAIL_SWAP_SIZE:
 	case SNAPSHOT_ALLOC_SWAP_PAGE:
 	case SNAPSHOT_CREATE_IMAGE:
+	case SNAPSHOT_SET_SWAP_AREA:
 		return snapshot_ioctl(file, cmd,
 				      (unsigned long) compat_ptr(arg));
-
-	case SNAPSHOT_SET_SWAP_AREA: {
-		struct compat_resume_swap_area __user *u_swap_area =
-			compat_ptr(arg);
-		struct resume_swap_area swap_area;
-		mm_segment_t old_fs;
-		int err;
-
-		err = get_user(swap_area.offset, &u_swap_area->offset);
-		err |= get_user(swap_area.dev, &u_swap_area->dev);
-		if (err)
-			return -EFAULT;
-		old_fs = get_fs();
-		set_fs(KERNEL_DS);
-		err = snapshot_ioctl(file, SNAPSHOT_SET_SWAP_AREA,
-				     (unsigned long) &swap_area);
-		set_fs(old_fs);
-		return err;
-	}
-
 	default:
 		return snapshot_ioctl(file, cmd, arg);
 	}
 }
-
 #endif /* CONFIG_COMPAT */
 
 static const struct file_operations snapshot_fops = {
diff --git a/kernel/printk/internal.h b/kernel/printk/internal.h
index c8e6ab6..b2b0f52 100644
--- a/kernel/printk/internal.h
+++ b/kernel/printk/internal.h
@@ -23,6 +23,9 @@ __printf(1, 0) int vprintk_func(const char *fmt, va_list args);
 void __printk_safe_enter(void);
 void __printk_safe_exit(void);
 
+void printk_safe_init(void);
+bool printk_percpu_data_ready(void);
+
 #define printk_safe_enter_irqsave(flags)	\
 	do {					\
 		local_irq_save(flags);		\
@@ -64,4 +67,6 @@ __printf(1, 0) int vprintk_func(const char *fmt, va_list args) { return 0; }
 #define printk_safe_enter_irq() local_irq_disable()
 #define printk_safe_exit_irq() local_irq_enable()
 
+static inline void printk_safe_init(void) { }
+static inline bool printk_percpu_data_ready(void) { return false; }
 #endif /* CONFIG_PRINTK */
diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
index 633f41a..9a9b615 100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -460,6 +460,18 @@ static char __log_buf[__LOG_BUF_LEN] __aligned(LOG_ALIGN);
 static char *log_buf = __log_buf;
 static u32 log_buf_len = __LOG_BUF_LEN;
 
+/*
+ * We cannot access per-CPU data (e.g. per-CPU flush irq_work) before
+ * per_cpu_areas are initialised. This variable is set to true when
+ * it's safe to access per-CPU data.
+ */
+static bool __printk_percpu_data_ready __read_mostly;
+
+bool printk_percpu_data_ready(void)
+{
+	return __printk_percpu_data_ready;
+}
+
 /* Return log buffer address */
 char *log_buf_addr_get(void)
 {
@@ -1146,12 +1158,28 @@ static void __init log_buf_add_cpu(void)
 static inline void log_buf_add_cpu(void) {}
 #endif /* CONFIG_SMP */
 
+static void __init set_percpu_data_ready(void)
+{
+	printk_safe_init();
+	/* Make sure we set this flag only after printk_safe() init is done */
+	barrier();
+	__printk_percpu_data_ready = true;
+}
+
 void __init setup_log_buf(int early)
 {
 	unsigned long flags;
 	char *new_log_buf;
 	unsigned int free;
 
+	/*
+	 * Some archs call setup_log_buf() multiple times - first is very
+	 * early, e.g. from setup_arch(), and second - when percpu_areas
+	 * are initialised.
+	 */
+	if (!early)
+		set_percpu_data_ready();
+
 	if (log_buf != __log_buf)
 		return;
 
@@ -2975,6 +3003,9 @@ static DEFINE_PER_CPU(struct irq_work, wake_up_klogd_work) = {
 
 void wake_up_klogd(void)
 {
+	if (!printk_percpu_data_ready())
+		return;
+
 	preempt_disable();
 	if (waitqueue_active(&log_wait)) {
 		this_cpu_or(printk_pending, PRINTK_PENDING_WAKEUP);
@@ -2985,6 +3016,9 @@ void wake_up_klogd(void)
 
 void defer_console_output(void)
 {
+	if (!printk_percpu_data_ready())
+		return;
+
 	preempt_disable();
 	__this_cpu_or(printk_pending, PRINTK_PENDING_OUTPUT);
 	irq_work_queue(this_cpu_ptr(&wake_up_klogd_work));
diff --git a/kernel/printk/printk_safe.c b/kernel/printk/printk_safe.c
index b4045e7..d9a659a 100644
--- a/kernel/printk/printk_safe.c
+++ b/kernel/printk/printk_safe.c
@@ -27,7 +27,6 @@
  * There are situations when we want to make sure that all buffers
  * were handled or when IRQs are blocked.
  */
-static int printk_safe_irq_ready __read_mostly;
 
 #define SAFE_LOG_BUF_LEN ((1 << CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT) -	\
 				sizeof(atomic_t) -			\
@@ -51,7 +50,7 @@ static DEFINE_PER_CPU(struct printk_safe_seq_buf, nmi_print_seq);
 /* Get flushed in a more safe context. */
 static void queue_flush_work(struct printk_safe_seq_buf *s)
 {
-	if (printk_safe_irq_ready)
+	if (printk_percpu_data_ready())
 		irq_work_queue(&s->work);
 }
 
@@ -402,14 +401,6 @@ void __init printk_safe_init(void)
 #endif
 	}
 
-	/*
-	 * In the highly unlikely event that a NMI were to trigger at
-	 * this moment. Make sure IRQ work is set up before this
-	 * variable is set.
-	 */
-	barrier();
-	printk_safe_irq_ready = 1;
-
 	/* Flush pending messages that did not have scheduled IRQ works. */
 	printk_safe_flush();
 }
diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c
index 06548e2..d9a49cd 100644
--- a/kernel/rcu/tree.c
+++ b/kernel/rcu/tree.c
@@ -825,7 +825,7 @@ static __always_inline void rcu_nmi_enter_common(bool irq)
 			rcu_cleanup_after_idle();
 
 		incby = 1;
-	} else if (tick_nohz_full_cpu(rdp->cpu) &&
+	} else if (irq && tick_nohz_full_cpu(rdp->cpu) &&
 		   rdp->dynticks_nmi_nesting == DYNTICK_IRQ_NONIDLE &&
 		   READ_ONCE(rdp->rcu_urgent_qs) &&
 		   !READ_ONCE(rdp->rcu_forced_tick)) {
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index a2694ba..3a61a3b 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -2119,12 +2119,6 @@ int select_task_rq(struct task_struct *p, int cpu, int sd_flags, int wake_flags)
 	return cpu;
 }
 
-static void update_avg(u64 *avg, u64 sample)
-{
-	s64 diff = sample - *avg;
-	*avg += diff >> 3;
-}
-
 void sched_set_stop_task(int cpu, struct task_struct *stop)
 {
 	struct sched_param param = { .sched_priority = MAX_RT_PRIO - 1 };
@@ -4126,7 +4120,8 @@ static inline void sched_submit_work(struct task_struct *tsk)
 	 * it wants to wake up a task to maintain concurrency.
 	 * As this function is called inside the schedule() context,
 	 * we disable preemption to avoid it calling schedule() again
-	 * in the possible wakeup of a kworker.
+	 * in the possible wakeup of a kworker and because wq_worker_sleeping()
+	 * requires it.
 	 */
 	if (tsk->flags & (PF_WQ_WORKER | PF_IO_WORKER)) {
 		preempt_disable();
@@ -6699,7 +6694,6 @@ void __init sched_init(void)
 
 		rq_attach_root(rq, &def_root_domain);
 #ifdef CONFIG_NO_HZ_COMMON
-		rq->last_load_update_tick = jiffies;
 		rq->last_blocked_load_update_tick = jiffies;
 		atomic_set(&rq->nohz_flags, 0);
 #endif
diff --git a/kernel/sched/cputime.c b/kernel/sched/cputime.c
index dac9104..ff9435d 100644
--- a/kernel/sched/cputime.c
+++ b/kernel/sched/cputime.c
@@ -1003,12 +1003,12 @@ u64 kcpustat_field(struct kernel_cpustat *kcpustat,
 		   enum cpu_usage_stat usage, int cpu)
 {
 	u64 *cpustat = kcpustat->cpustat;
+	u64 val = cpustat[usage];
 	struct rq *rq;
-	u64 val;
 	int err;
 
 	if (!vtime_accounting_enabled_cpu(cpu))
-		return cpustat[usage];
+		return val;
 
 	rq = cpu_rq(cpu);
 
diff --git a/kernel/sched/debug.c b/kernel/sched/debug.c
index 8331bc0..a562df5 100644
--- a/kernel/sched/debug.c
+++ b/kernel/sched/debug.c
@@ -816,10 +816,12 @@ static int __init init_sched_debug_procfs(void)
 
 __initcall(init_sched_debug_procfs);
 
-#define __P(F)	SEQ_printf(m, "%-45s:%21Ld\n",	     #F, (long long)F)
-#define   P(F)	SEQ_printf(m, "%-45s:%21Ld\n",	     #F, (long long)p->F)
-#define __PN(F)	SEQ_printf(m, "%-45s:%14Ld.%06ld\n", #F, SPLIT_NS((long long)F))
-#define   PN(F)	SEQ_printf(m, "%-45s:%14Ld.%06ld\n", #F, SPLIT_NS((long long)p->F))
+#define __PS(S, F) SEQ_printf(m, "%-45s:%21Ld\n", S, (long long)(F))
+#define __P(F) __PS(#F, F)
+#define   P(F) __PS(#F, p->F)
+#define __PSN(S, F) SEQ_printf(m, "%-45s:%14Ld.%06ld\n", S, SPLIT_NS((long long)(F)))
+#define __PN(F) __PSN(#F, F)
+#define   PN(F) __PSN(#F, p->F)
 
 
 #ifdef CONFIG_NUMA_BALANCING
@@ -868,18 +870,9 @@ void proc_sched_show_task(struct task_struct *p, struct pid_namespace *ns,
 	SEQ_printf(m,
 		"---------------------------------------------------------"
 		"----------\n");
-#define __P(F) \
-	SEQ_printf(m, "%-45s:%21Ld\n", #F, (long long)F)
-#define P(F) \
-	SEQ_printf(m, "%-45s:%21Ld\n", #F, (long long)p->F)
-#define P_SCHEDSTAT(F) \
-	SEQ_printf(m, "%-45s:%21Ld\n", #F, (long long)schedstat_val(p->F))
-#define __PN(F) \
-	SEQ_printf(m, "%-45s:%14Ld.%06ld\n", #F, SPLIT_NS((long long)F))
-#define PN(F) \
-	SEQ_printf(m, "%-45s:%14Ld.%06ld\n", #F, SPLIT_NS((long long)p->F))
-#define PN_SCHEDSTAT(F) \
-	SEQ_printf(m, "%-45s:%14Ld.%06ld\n", #F, SPLIT_NS((long long)schedstat_val(p->F)))
+
+#define P_SCHEDSTAT(F)  __PS(#F, schedstat_val(p->F))
+#define PN_SCHEDSTAT(F) __PSN(#F, schedstat_val(p->F))
 
 	PN(se.exec_start);
 	PN(se.vruntime);
@@ -939,10 +932,8 @@ void proc_sched_show_task(struct task_struct *p, struct pid_namespace *ns,
 	}
 
 	__P(nr_switches);
-	SEQ_printf(m, "%-45s:%21Ld\n",
-		   "nr_voluntary_switches", (long long)p->nvcsw);
-	SEQ_printf(m, "%-45s:%21Ld\n",
-		   "nr_involuntary_switches", (long long)p->nivcsw);
+	__PS("nr_voluntary_switches", p->nvcsw);
+	__PS("nr_involuntary_switches", p->nivcsw);
 
 	P(se.load.weight);
 #ifdef CONFIG_SMP
@@ -956,6 +947,12 @@ void proc_sched_show_task(struct task_struct *p, struct pid_namespace *ns,
 	P(se.avg.util_est.ewma);
 	P(se.avg.util_est.enqueued);
 #endif
+#ifdef CONFIG_UCLAMP_TASK
+	__PS("uclamp.min", p->uclamp[UCLAMP_MIN].value);
+	__PS("uclamp.max", p->uclamp[UCLAMP_MAX].value);
+	__PS("effective uclamp.min", uclamp_eff_value(p, UCLAMP_MIN));
+	__PS("effective uclamp.max", uclamp_eff_value(p, UCLAMP_MAX));
+#endif
 	P(policy);
 	P(prio);
 	if (task_has_dl_policy(p)) {
@@ -963,11 +960,7 @@ void proc_sched_show_task(struct task_struct *p, struct pid_namespace *ns,
 		P(dl.deadline);
 	}
 #undef PN_SCHEDSTAT
-#undef PN
-#undef __PN
 #undef P_SCHEDSTAT
-#undef P
-#undef __P
 
 	{
 		unsigned int this_cpu = raw_smp_processor_id();
@@ -975,8 +968,7 @@ void proc_sched_show_task(struct task_struct *p, struct pid_namespace *ns,
 
 		t0 = cpu_clock(this_cpu);
 		t1 = cpu_clock(this_cpu);
-		SEQ_printf(m, "%-45s:%21Ld\n",
-			   "clock-delta", (long long)(t1-t0));
+		__PS("clock-delta", t1-t0);
 	}
 
 	sched_show_numa(p, m);
diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index d7fb20a..02f323b 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -2799,7 +2799,7 @@ static void task_numa_work(struct callback_head *work)
 		 * Skip inaccessible VMAs to avoid any confusion between
 		 * PROT_NONE and NUMA hinting ptes
 		 */
-		if (!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE)))
+		if (!vma_is_accessible(vma))
 			continue;
 
 		do {
@@ -4836,11 +4836,10 @@ void unthrottle_cfs_rq(struct cfs_rq *cfs_rq)
 		resched_curr(rq);
 }
 
-static u64 distribute_cfs_runtime(struct cfs_bandwidth *cfs_b, u64 remaining)
+static void distribute_cfs_runtime(struct cfs_bandwidth *cfs_b)
 {
 	struct cfs_rq *cfs_rq;
-	u64 runtime;
-	u64 starting_runtime = remaining;
+	u64 runtime, remaining = 1;
 
 	rcu_read_lock();
 	list_for_each_entry_rcu(cfs_rq, &cfs_b->throttled_cfs_rq,
@@ -4855,10 +4854,13 @@ static u64 distribute_cfs_runtime(struct cfs_bandwidth *cfs_b, u64 remaining)
 		/* By the above check, this should never be true */
 		SCHED_WARN_ON(cfs_rq->runtime_remaining > 0);
 
+		raw_spin_lock(&cfs_b->lock);
 		runtime = -cfs_rq->runtime_remaining + 1;
-		if (runtime > remaining)
-			runtime = remaining;
-		remaining -= runtime;
+		if (runtime > cfs_b->runtime)
+			runtime = cfs_b->runtime;
+		cfs_b->runtime -= runtime;
+		remaining = cfs_b->runtime;
+		raw_spin_unlock(&cfs_b->lock);
 
 		cfs_rq->runtime_remaining += runtime;
 
@@ -4873,8 +4875,6 @@ static u64 distribute_cfs_runtime(struct cfs_bandwidth *cfs_b, u64 remaining)
 			break;
 	}
 	rcu_read_unlock();
-
-	return starting_runtime - remaining;
 }
 
 /*
@@ -4885,7 +4885,6 @@ static u64 distribute_cfs_runtime(struct cfs_bandwidth *cfs_b, u64 remaining)
  */
 static int do_sched_cfs_period_timer(struct cfs_bandwidth *cfs_b, int overrun, unsigned long flags)
 {
-	u64 runtime;
 	int throttled;
 
 	/* no need to continue the timer with no bandwidth constraint */
@@ -4914,24 +4913,17 @@ static int do_sched_cfs_period_timer(struct cfs_bandwidth *cfs_b, int overrun, u
 	cfs_b->nr_throttled += overrun;
 
 	/*
-	 * This check is repeated as we are holding onto the new bandwidth while
-	 * we unthrottle. This can potentially race with an unthrottled group
-	 * trying to acquire new bandwidth from the global pool. This can result
-	 * in us over-using our runtime if it is all used during this loop, but
-	 * only by limited amounts in that extreme case.
+	 * This check is repeated as we release cfs_b->lock while we unthrottle.
 	 */
 	while (throttled && cfs_b->runtime > 0 && !cfs_b->distribute_running) {
-		runtime = cfs_b->runtime;
 		cfs_b->distribute_running = 1;
 		raw_spin_unlock_irqrestore(&cfs_b->lock, flags);
 		/* we can't nest cfs_b->lock while distributing bandwidth */
-		runtime = distribute_cfs_runtime(cfs_b, runtime);
+		distribute_cfs_runtime(cfs_b);
 		raw_spin_lock_irqsave(&cfs_b->lock, flags);
 
 		cfs_b->distribute_running = 0;
 		throttled = !list_empty(&cfs_b->throttled_cfs_rq);
-
-		lsub_positive(&cfs_b->runtime, runtime);
 	}
 
 	/*
@@ -5065,10 +5057,9 @@ static void do_sched_cfs_slack_timer(struct cfs_bandwidth *cfs_b)
 	if (!runtime)
 		return;
 
-	runtime = distribute_cfs_runtime(cfs_b, runtime);
+	distribute_cfs_runtime(cfs_b);
 
 	raw_spin_lock_irqsave(&cfs_b->lock, flags);
-	lsub_positive(&cfs_b->runtime, runtime);
 	cfs_b->distribute_running = 0;
 	raw_spin_unlock_irqrestore(&cfs_b->lock, flags);
 }
@@ -6080,8 +6071,7 @@ static int select_idle_cpu(struct task_struct *p, struct sched_domain *sd, int t
 	struct cpumask *cpus = this_cpu_cpumask_var_ptr(select_idle_mask);
 	struct sched_domain *this_sd;
 	u64 avg_cost, avg_idle;
-	u64 time, cost;
-	s64 delta;
+	u64 time;
 	int this = smp_processor_id();
 	int cpu, nr = INT_MAX;
 
@@ -6119,9 +6109,7 @@ static int select_idle_cpu(struct task_struct *p, struct sched_domain *sd, int t
 	}
 
 	time = cpu_clock(this) - time;
-	cost = this_sd->avg_scan_cost;
-	delta = (s64)(time - cost) / 8;
-	this_sd->avg_scan_cost += delta;
+	update_avg(&this_sd->avg_scan_cost, time);
 
 	return cpu;
 }
@@ -9048,6 +9036,14 @@ static inline void calculate_imbalance(struct lb_env *env, struct sd_lb_stats *s
 
 		sds->avg_load = (sds->total_load * SCHED_CAPACITY_SCALE) /
 				sds->total_capacity;
+		/*
+		 * If the local group is more loaded than the selected
+		 * busiest group don't try to pull any tasks.
+		 */
+		if (local->avg_load >= busiest->avg_load) {
+			env->imbalance = 0;
+			return;
+		}
 	}
 
 	/*
diff --git a/kernel/sched/isolation.c b/kernel/sched/isolation.c
index 008d6ac..808244f 100644
--- a/kernel/sched/isolation.c
+++ b/kernel/sched/isolation.c
@@ -149,6 +149,9 @@ __setup("nohz_full=", housekeeping_nohz_full_setup);
 static int __init housekeeping_isolcpus_setup(char *str)
 {
 	unsigned int flags = 0;
+	bool illegal = false;
+	char *par;
+	int len;
 
 	while (isalpha(*str)) {
 		if (!strncmp(str, "nohz,", 5)) {
@@ -169,8 +172,22 @@ static int __init housekeeping_isolcpus_setup(char *str)
 			continue;
 		}
 
-		pr_warn("isolcpus: Error, unknown flag\n");
-		return 0;
+		/*
+		 * Skip unknown sub-parameter and validate that it is not
+		 * containing an invalid character.
+		 */
+		for (par = str, len = 0; *str && *str != ','; str++, len++) {
+			if (!isalpha(*str) && *str != '_')
+				illegal = true;
+		}
+
+		if (illegal) {
+			pr_warn("isolcpus: Invalid flag %.*s\n", len, par);
+			return 0;
+		}
+
+		pr_info("isolcpus: Skipped unknown flag %.*s\n", len, par);
+		str++;
 	}
 
 	/* Default behaviour for isolcpus without flags */
diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
index 0f616bf..db3a576 100644
--- a/kernel/sched/sched.h
+++ b/kernel/sched/sched.h
@@ -195,6 +195,12 @@ static inline int task_has_dl_policy(struct task_struct *p)
 
 #define cap_scale(v, s) ((v)*(s) >> SCHED_CAPACITY_SHIFT)
 
+static inline void update_avg(u64 *avg, u64 sample)
+{
+	s64 diff = sample - *avg;
+	*avg += diff / 8;
+}
+
 /*
  * !! For sched_setattr_nocheck() (kernel) only !!
  *
@@ -882,7 +888,6 @@ struct rq {
 #endif
 #ifdef CONFIG_NO_HZ_COMMON
 #ifdef CONFIG_SMP
-	unsigned long		last_load_update_tick;
 	unsigned long		last_blocked_load_update_tick;
 	unsigned int		has_blocked_load;
 #endif /* CONFIG_SMP */
diff --git a/kernel/signal.c b/kernel/signal.c
index e58a6c6..7131048 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -1510,15 +1510,15 @@ int kill_pid_usb_asyncio(int sig, int errno, sigval_t addr,
 	unsigned long flags;
 	int ret = -EINVAL;
 
+	if (!valid_signal(sig))
+		return ret;
+
 	clear_siginfo(&info);
 	info.si_signo = sig;
 	info.si_errno = errno;
 	info.si_code = SI_ASYNCIO;
 	*((sigval_t *)&info.si_pid) = addr;
 
-	if (!valid_signal(sig))
-		return ret;
-
 	rcu_read_lock();
 	p = pid_task(pid, PIDTYPE_PID);
 	if (!p) {
@@ -1557,12 +1557,8 @@ static int kill_something_info(int sig, struct kernel_siginfo *info, pid_t pid)
 {
 	int ret;
 
-	if (pid > 0) {
-		rcu_read_lock();
-		ret = kill_pid_info(sig, info, find_vpid(pid));
-		rcu_read_unlock();
-		return ret;
-	}
+	if (pid > 0)
+		return kill_proc_info(sig, info, pid);
 
 	/* -INT_MIN is undefined.  Exclude this case to avoid a UBSAN warning */
 	if (pid == INT_MIN)
diff --git a/kernel/time/hrtimer.c b/kernel/time/hrtimer.c
index d0a5ba3..d89da1c 100644
--- a/kernel/time/hrtimer.c
+++ b/kernel/time/hrtimer.c
@@ -1480,6 +1480,7 @@ static void __run_hrtimer(struct hrtimer_cpu_base *cpu_base,
 			  unsigned long flags) __must_hold(&cpu_base->lock)
 {
 	enum hrtimer_restart (*fn)(struct hrtimer *);
+	bool expires_in_hardirq;
 	int restart;
 
 	lockdep_assert_held(&cpu_base->lock);
@@ -1514,11 +1515,11 @@ static void __run_hrtimer(struct hrtimer_cpu_base *cpu_base,
 	 */
 	raw_spin_unlock_irqrestore(&cpu_base->lock, flags);
 	trace_hrtimer_expire_entry(timer, now);
-	lockdep_hrtimer_enter(timer);
+	expires_in_hardirq = lockdep_hrtimer_enter(timer);
 
 	restart = fn(timer);
 
-	lockdep_hrtimer_exit(timer);
+	lockdep_hrtimer_exit(expires_in_hardirq);
 	trace_hrtimer_expire_exit(timer);
 	raw_spin_lock_irq(&cpu_base->lock);
 
diff --git a/kernel/time/namespace.c b/kernel/time/namespace.c
index e6ba064..53bce34 100644
--- a/kernel/time/namespace.c
+++ b/kernel/time/namespace.c
@@ -338,7 +338,20 @@ static struct user_namespace *timens_owner(struct ns_common *ns)
 
 static void show_offset(struct seq_file *m, int clockid, struct timespec64 *ts)
 {
-	seq_printf(m, "%d %lld %ld\n", clockid, ts->tv_sec, ts->tv_nsec);
+	char *clock;
+
+	switch (clockid) {
+	case CLOCK_BOOTTIME:
+		clock = "boottime";
+		break;
+	case CLOCK_MONOTONIC:
+		clock = "monotonic";
+		break;
+	default:
+		clock = "unknown";
+		break;
+	}
+	seq_printf(m, "%-10s %10lld %9ld\n", clock, ts->tv_sec, ts->tv_nsec);
 }
 
 void proc_timens_show_offsets(struct task_struct *p, struct seq_file *m)
@@ -447,6 +460,7 @@ const struct proc_ns_operations timens_operations = {
 
 const struct proc_ns_operations timens_for_children_operations = {
 	.name		= "time_for_children",
+	.real_ns_name	= "time",
 	.type		= CLONE_NEWTIME,
 	.get		= timens_for_children_get,
 	.put		= timens_put,
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index fd81c7d..041694a 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -102,7 +102,7 @@ static bool ftrace_pids_enabled(struct ftrace_ops *ops)
 
 	tr = ops->private;
 
-	return tr->function_pids != NULL;
+	return tr->function_pids != NULL || tr->function_no_pids != NULL;
 }
 
 static void ftrace_update_trampoline(struct ftrace_ops *ops);
@@ -139,13 +139,23 @@ static inline void ftrace_ops_init(struct ftrace_ops *ops)
 #endif
 }
 
+#define FTRACE_PID_IGNORE	-1
+#define FTRACE_PID_TRACE	-2
+
 static void ftrace_pid_func(unsigned long ip, unsigned long parent_ip,
 			    struct ftrace_ops *op, struct pt_regs *regs)
 {
 	struct trace_array *tr = op->private;
+	int pid;
 
-	if (tr && this_cpu_read(tr->array_buffer.data->ftrace_ignore_pid))
-		return;
+	if (tr) {
+		pid = this_cpu_read(tr->array_buffer.data->ftrace_ignore_pid);
+		if (pid == FTRACE_PID_IGNORE)
+			return;
+		if (pid != FTRACE_PID_TRACE &&
+		    pid != current->pid)
+			return;
+	}
 
 	op->saved_func(ip, parent_ip, op, regs);
 }
@@ -6923,11 +6933,17 @@ ftrace_filter_pid_sched_switch_probe(void *data, bool preempt,
 {
 	struct trace_array *tr = data;
 	struct trace_pid_list *pid_list;
+	struct trace_pid_list *no_pid_list;
 
 	pid_list = rcu_dereference_sched(tr->function_pids);
+	no_pid_list = rcu_dereference_sched(tr->function_no_pids);
 
-	this_cpu_write(tr->array_buffer.data->ftrace_ignore_pid,
-		       trace_ignore_this_task(pid_list, next));
+	if (trace_ignore_this_task(pid_list, no_pid_list, next))
+		this_cpu_write(tr->array_buffer.data->ftrace_ignore_pid,
+			       FTRACE_PID_IGNORE);
+	else
+		this_cpu_write(tr->array_buffer.data->ftrace_ignore_pid,
+			       next->pid);
 }
 
 static void
@@ -6940,6 +6956,9 @@ ftrace_pid_follow_sched_process_fork(void *data,
 
 	pid_list = rcu_dereference_sched(tr->function_pids);
 	trace_filter_add_remove_task(pid_list, self, task);
+
+	pid_list = rcu_dereference_sched(tr->function_no_pids);
+	trace_filter_add_remove_task(pid_list, self, task);
 }
 
 static void
@@ -6950,6 +6969,9 @@ ftrace_pid_follow_sched_process_exit(void *data, struct task_struct *task)
 
 	pid_list = rcu_dereference_sched(tr->function_pids);
 	trace_filter_add_remove_task(pid_list, NULL, task);
+
+	pid_list = rcu_dereference_sched(tr->function_no_pids);
+	trace_filter_add_remove_task(pid_list, NULL, task);
 }
 
 void ftrace_pid_follow_fork(struct trace_array *tr, bool enable)
@@ -6967,42 +6989,57 @@ void ftrace_pid_follow_fork(struct trace_array *tr, bool enable)
 	}
 }
 
-static void clear_ftrace_pids(struct trace_array *tr)
+static void clear_ftrace_pids(struct trace_array *tr, int type)
 {
 	struct trace_pid_list *pid_list;
+	struct trace_pid_list *no_pid_list;
 	int cpu;
 
 	pid_list = rcu_dereference_protected(tr->function_pids,
 					     lockdep_is_held(&ftrace_lock));
-	if (!pid_list)
+	no_pid_list = rcu_dereference_protected(tr->function_no_pids,
+						lockdep_is_held(&ftrace_lock));
+
+	/* Make sure there's something to do */
+	if (!pid_type_enabled(type, pid_list, no_pid_list))
 		return;
 
-	unregister_trace_sched_switch(ftrace_filter_pid_sched_switch_probe, tr);
+	/* See if the pids still need to be checked after this */
+	if (!still_need_pid_events(type, pid_list, no_pid_list)) {
+		unregister_trace_sched_switch(ftrace_filter_pid_sched_switch_probe, tr);
+		for_each_possible_cpu(cpu)
+			per_cpu_ptr(tr->array_buffer.data, cpu)->ftrace_ignore_pid = FTRACE_PID_TRACE;
+	}
 
-	for_each_possible_cpu(cpu)
-		per_cpu_ptr(tr->array_buffer.data, cpu)->ftrace_ignore_pid = false;
+	if (type & TRACE_PIDS)
+		rcu_assign_pointer(tr->function_pids, NULL);
 
-	rcu_assign_pointer(tr->function_pids, NULL);
+	if (type & TRACE_NO_PIDS)
+		rcu_assign_pointer(tr->function_no_pids, NULL);
 
 	/* Wait till all users are no longer using pid filtering */
 	synchronize_rcu();
 
-	trace_free_pid_list(pid_list);
+	if ((type & TRACE_PIDS) && pid_list)
+		trace_free_pid_list(pid_list);
+
+	if ((type & TRACE_NO_PIDS) && no_pid_list)
+		trace_free_pid_list(no_pid_list);
 }
 
 void ftrace_clear_pids(struct trace_array *tr)
 {
 	mutex_lock(&ftrace_lock);
 
-	clear_ftrace_pids(tr);
+	clear_ftrace_pids(tr, TRACE_PIDS | TRACE_NO_PIDS);
 
 	mutex_unlock(&ftrace_lock);
 }
 
-static void ftrace_pid_reset(struct trace_array *tr)
+static void ftrace_pid_reset(struct trace_array *tr, int type)
 {
 	mutex_lock(&ftrace_lock);
-	clear_ftrace_pids(tr);
+	clear_ftrace_pids(tr, type);
 
 	ftrace_update_pid_func();
 	ftrace_startup_all(0);
@@ -7066,9 +7103,45 @@ static const struct seq_operations ftrace_pid_sops = {
 	.show = fpid_show,
 };
 
-static int
-ftrace_pid_open(struct inode *inode, struct file *file)
+static void *fnpid_start(struct seq_file *m, loff_t *pos)
+	__acquires(RCU)
 {
+	struct trace_pid_list *pid_list;
+	struct trace_array *tr = m->private;
+
+	mutex_lock(&ftrace_lock);
+	rcu_read_lock_sched();
+
+	pid_list = rcu_dereference_sched(tr->function_no_pids);
+
+	if (!pid_list)
+		return !(*pos) ? FTRACE_NO_PIDS : NULL;
+
+	return trace_pid_start(pid_list, pos);
+}
+
+static void *fnpid_next(struct seq_file *m, void *v, loff_t *pos)
+{
+	struct trace_array *tr = m->private;
+	struct trace_pid_list *pid_list = rcu_dereference_sched(tr->function_no_pids);
+
+	if (v == FTRACE_NO_PIDS) {
+		(*pos)++;
+		return NULL;
+	}
+	return trace_pid_next(pid_list, v, pos);
+}
+
+static const struct seq_operations ftrace_no_pid_sops = {
+	.start = fnpid_start,
+	.next = fnpid_next,
+	.stop = fpid_stop,
+	.show = fpid_show,
+};
+
+static int pid_open(struct inode *inode, struct file *file, int type)
+{
+	const struct seq_operations *seq_ops;
 	struct trace_array *tr = inode->i_private;
 	struct seq_file *m;
 	int ret = 0;
@@ -7079,9 +7152,18 @@ ftrace_pid_open(struct inode *inode, struct file *file)
 
 	if ((file->f_mode & FMODE_WRITE) &&
 	    (file->f_flags & O_TRUNC))
-		ftrace_pid_reset(tr);
+		ftrace_pid_reset(tr, type);
 
-	ret = seq_open(file, &ftrace_pid_sops);
+	switch (type) {
+	case TRACE_PIDS:
+		seq_ops = &ftrace_pid_sops;
+		break;
+	case TRACE_NO_PIDS:
+		seq_ops = &ftrace_no_pid_sops;
+		break;
+	}
+
+	ret = seq_open(file, seq_ops);
 	if (ret < 0) {
 		trace_array_put(tr);
 	} else {
@@ -7093,10 +7175,23 @@ ftrace_pid_open(struct inode *inode, struct file *file)
 	return ret;
 }
 
+static int
+ftrace_pid_open(struct inode *inode, struct file *file)
+{
+	return pid_open(inode, file, TRACE_PIDS);
+}
+
+static int
+ftrace_no_pid_open(struct inode *inode, struct file *file)
+{
+	return pid_open(inode, file, TRACE_NO_PIDS);
+}
+
 static void ignore_task_cpu(void *data)
 {
 	struct trace_array *tr = data;
 	struct trace_pid_list *pid_list;
+	struct trace_pid_list *no_pid_list;
 
 	/*
 	 * This function is called by on_each_cpu() while the
@@ -7104,18 +7199,25 @@ static void ignore_task_cpu(void *data)
 	 */
 	pid_list = rcu_dereference_protected(tr->function_pids,
 					     mutex_is_locked(&ftrace_lock));
+	no_pid_list = rcu_dereference_protected(tr->function_no_pids,
+						mutex_is_locked(&ftrace_lock));
 
-	this_cpu_write(tr->array_buffer.data->ftrace_ignore_pid,
-		       trace_ignore_this_task(pid_list, current));
+	if (trace_ignore_this_task(pid_list, no_pid_list, current))
+		this_cpu_write(tr->array_buffer.data->ftrace_ignore_pid,
+			       FTRACE_PID_IGNORE);
+	else
+		this_cpu_write(tr->array_buffer.data->ftrace_ignore_pid,
+			       current->pid);
 }
 
 static ssize_t
-ftrace_pid_write(struct file *filp, const char __user *ubuf,
-		   size_t cnt, loff_t *ppos)
+pid_write(struct file *filp, const char __user *ubuf,
+	  size_t cnt, loff_t *ppos, int type)
 {
 	struct seq_file *m = filp->private_data;
 	struct trace_array *tr = m->private;
-	struct trace_pid_list *filtered_pids = NULL;
+	struct trace_pid_list *filtered_pids;
+	struct trace_pid_list *other_pids;
 	struct trace_pid_list *pid_list;
 	ssize_t ret;
 
@@ -7124,19 +7226,39 @@ ftrace_pid_write(struct file *filp, const char __user *ubuf,
 
 	mutex_lock(&ftrace_lock);
 
-	filtered_pids = rcu_dereference_protected(tr->function_pids,
+	switch (type) {
+	case TRACE_PIDS:
+		filtered_pids = rcu_dereference_protected(tr->function_pids,
 					     lockdep_is_held(&ftrace_lock));
+		other_pids = rcu_dereference_protected(tr->function_no_pids,
+					     lockdep_is_held(&ftrace_lock));
+		break;
+	case TRACE_NO_PIDS:
+		filtered_pids = rcu_dereference_protected(tr->function_no_pids,
+					     lockdep_is_held(&ftrace_lock));
+		other_pids = rcu_dereference_protected(tr->function_pids,
+					     lockdep_is_held(&ftrace_lock));
+		break;
+	}
 
 	ret = trace_pid_write(filtered_pids, &pid_list, ubuf, cnt);
 	if (ret < 0)
 		goto out;
 
-	rcu_assign_pointer(tr->function_pids, pid_list);
+	switch (type) {
+	case TRACE_PIDS:
+		rcu_assign_pointer(tr->function_pids, pid_list);
+		break;
+	case TRACE_NO_PIDS:
+		rcu_assign_pointer(tr->function_no_pids, pid_list);
+		break;
+	}
+
 
 	if (filtered_pids) {
 		synchronize_rcu();
 		trace_free_pid_list(filtered_pids);
-	} else if (pid_list) {
+	} else if (pid_list && !other_pids) {
 		/* Register a probe to set whether to ignore the tracing of a task */
 		register_trace_sched_switch(ftrace_filter_pid_sched_switch_probe, tr);
 	}
@@ -7159,6 +7281,20 @@ ftrace_pid_write(struct file *filp, const char __user *ubuf,
 	return ret;
 }
 
+static ssize_t
+ftrace_pid_write(struct file *filp, const char __user *ubuf,
+		 size_t cnt, loff_t *ppos)
+{
+	return pid_write(filp, ubuf, cnt, ppos, TRACE_PIDS);
+}
+
+static ssize_t
+ftrace_no_pid_write(struct file *filp, const char __user *ubuf,
+		    size_t cnt, loff_t *ppos)
+{
+	return pid_write(filp, ubuf, cnt, ppos, TRACE_NO_PIDS);
+}
+
 static int
 ftrace_pid_release(struct inode *inode, struct file *file)
 {
@@ -7177,10 +7313,20 @@ static const struct file_operations ftrace_pid_fops = {
 	.release	= ftrace_pid_release,
 };
 
+static const struct file_operations ftrace_no_pid_fops = {
+	.open		= ftrace_no_pid_open,
+	.write		= ftrace_no_pid_write,
+	.read		= seq_read,
+	.llseek		= tracing_lseek,
+	.release	= ftrace_pid_release,
+};
+
 void ftrace_init_tracefs(struct trace_array *tr, struct dentry *d_tracer)
 {
 	trace_create_file("set_ftrace_pid", 0644, d_tracer,
 			    tr, &ftrace_pid_fops);
+	trace_create_file("set_ftrace_notrace_pid", 0644, d_tracer,
+			    tr, &ftrace_no_pid_fops);
 }
 
 void __init ftrace_init_tracefs_toplevel(struct trace_array *tr,
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index 61f0e92..6f0b42c 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -441,6 +441,7 @@ enum {
 struct ring_buffer_per_cpu {
 	int				cpu;
 	atomic_t			record_disabled;
+	atomic_t			resize_disabled;
 	struct trace_buffer	*buffer;
 	raw_spinlock_t			reader_lock;	/* serialize readers */
 	arch_spinlock_t			lock;
@@ -484,7 +485,6 @@ struct trace_buffer {
 	unsigned			flags;
 	int				cpus;
 	atomic_t			record_disabled;
-	atomic_t			resize_disabled;
 	cpumask_var_t			cpumask;
 
 	struct lock_class_key		*reader_lock_key;
@@ -503,10 +503,14 @@ struct trace_buffer {
 struct ring_buffer_iter {
 	struct ring_buffer_per_cpu	*cpu_buffer;
 	unsigned long			head;
+	unsigned long			next_event;
 	struct buffer_page		*head_page;
 	struct buffer_page		*cache_reader_page;
 	unsigned long			cache_read;
 	u64				read_stamp;
+	u64				page_stamp;
+	struct ring_buffer_event	*event;
+	int				missed_events;
 };
 
 /**
@@ -1737,18 +1741,24 @@ int ring_buffer_resize(struct trace_buffer *buffer, unsigned long size,
 
 	size = nr_pages * BUF_PAGE_SIZE;
 
-	/*
-	 * Don't succeed if resizing is disabled, as a reader might be
-	 * manipulating the ring buffer and is expecting a sane state while
-	 * this is true.
-	 */
-	if (atomic_read(&buffer->resize_disabled))
-		return -EBUSY;
-
 	/* prevent another thread from changing buffer sizes */
 	mutex_lock(&buffer->mutex);
 
+
 	if (cpu_id == RING_BUFFER_ALL_CPUS) {
+		/*
+		 * Don't succeed if resizing is disabled, as a reader might be
+		 * manipulating the ring buffer and is expecting a sane state while
+		 * this is true.
+		 */
+		for_each_buffer_cpu(buffer, cpu) {
+			cpu_buffer = buffer->buffers[cpu];
+			if (atomic_read(&cpu_buffer->resize_disabled)) {
+				err = -EBUSY;
+				goto out_err_unlock;
+			}
+		}
+
 		/* calculate the pages to update */
 		for_each_buffer_cpu(buffer, cpu) {
 			cpu_buffer = buffer->buffers[cpu];
@@ -1816,6 +1826,16 @@ int ring_buffer_resize(struct trace_buffer *buffer, unsigned long size,
 		if (nr_pages == cpu_buffer->nr_pages)
 			goto out;
 
+		/*
+		 * Don't succeed if resizing is disabled, as a reader might be
+		 * manipulating the ring buffer and is expecting a sane state while
+		 * this is true.
+		 */
+		if (atomic_read(&cpu_buffer->resize_disabled)) {
+			err = -EBUSY;
+			goto out_err_unlock;
+		}
+
 		cpu_buffer->nr_pages_to_update = nr_pages -
 						cpu_buffer->nr_pages;
 
@@ -1885,6 +1905,7 @@ int ring_buffer_resize(struct trace_buffer *buffer, unsigned long size,
 			free_buffer_page(bpage);
 		}
 	}
+ out_err_unlock:
 	mutex_unlock(&buffer->mutex);
 	return err;
 }
@@ -1913,17 +1934,65 @@ rb_reader_event(struct ring_buffer_per_cpu *cpu_buffer)
 			       cpu_buffer->reader_page->read);
 }
 
-static __always_inline struct ring_buffer_event *
-rb_iter_head_event(struct ring_buffer_iter *iter)
-{
-	return __rb_page_index(iter->head_page, iter->head);
-}
-
 static __always_inline unsigned rb_page_commit(struct buffer_page *bpage)
 {
 	return local_read(&bpage->page->commit);
 }
 
+static struct ring_buffer_event *
+rb_iter_head_event(struct ring_buffer_iter *iter)
+{
+	struct ring_buffer_event *event;
+	struct buffer_page *iter_head_page = iter->head_page;
+	unsigned long commit;
+	unsigned length;
+
+	if (iter->head != iter->next_event)
+		return iter->event;
+
+	/*
+	 * When the writer goes across pages, it issues a cmpxchg which
+	 * is a mb(), which will synchronize with the rmb here.
+	 * (see rb_tail_page_update() and __rb_reserve_next())
+	 */
+	commit = rb_page_commit(iter_head_page);
+	smp_rmb();
+	event = __rb_page_index(iter_head_page, iter->head);
+	length = rb_event_length(event);
+
+	/*
+	 * READ_ONCE() doesn't work on functions and we don't want the
+	 * compiler doing any crazy optimizations with length.
+	 */
+	barrier();
+
+	if ((iter->head + length) > commit || length > BUF_MAX_DATA_SIZE)
+		/* Writer corrupted the read? */
+		goto reset;
+
+	memcpy(iter->event, event, length);
+	/*
+	 * If the page stamp is still the same after this rmb() then the
+	 * event was safely copied without the writer entering the page.
+	 */
+	smp_rmb();
+
+	/* Make sure the page didn't change since we read this */
+	if (iter->page_stamp != iter_head_page->page->time_stamp ||
+	    commit > rb_page_commit(iter_head_page))
+		goto reset;
+
+	iter->next_event = iter->head + length;
+	return iter->event;
+ reset:
+	/* Reset to the beginning */
+	iter->page_stamp = iter->read_stamp = iter->head_page->page->time_stamp;
+	iter->head = 0;
+	iter->next_event = 0;
+	iter->missed_events = 1;
+	return NULL;
+}
+
 /* Size is determined by what has been committed */
 static __always_inline unsigned rb_page_size(struct buffer_page *bpage)
 {
@@ -1959,8 +2028,9 @@ static void rb_inc_iter(struct ring_buffer_iter *iter)
 	else
 		rb_inc_page(cpu_buffer, &iter->head_page);
 
-	iter->read_stamp = iter->head_page->page->time_stamp;
+	iter->page_stamp = iter->read_stamp = iter->head_page->page->time_stamp;
 	iter->head = 0;
+	iter->next_event = 0;
 }
 
 /*
@@ -3547,14 +3617,18 @@ static void rb_iter_reset(struct ring_buffer_iter *iter)
 	/* Iterator usage is expected to have record disabled */
 	iter->head_page = cpu_buffer->reader_page;
 	iter->head = cpu_buffer->reader_page->read;
+	iter->next_event = iter->head;
 
 	iter->cache_reader_page = iter->head_page;
 	iter->cache_read = cpu_buffer->read;
 
-	if (iter->head)
+	if (iter->head) {
 		iter->read_stamp = cpu_buffer->read_stamp;
-	else
+		iter->page_stamp = cpu_buffer->reader_page->page->time_stamp;
+	} else {
 		iter->read_stamp = iter->head_page->page->time_stamp;
+		iter->page_stamp = iter->read_stamp;
+	}
 }
 
 /**
@@ -3590,17 +3664,38 @@ int ring_buffer_iter_empty(struct ring_buffer_iter *iter)
 	struct buffer_page *reader;
 	struct buffer_page *head_page;
 	struct buffer_page *commit_page;
+	struct buffer_page *curr_commit_page;
 	unsigned commit;
+	u64 curr_commit_ts;
+	u64 commit_ts;
 
 	cpu_buffer = iter->cpu_buffer;
-
-	/* Remember, trace recording is off when iterator is in use */
 	reader = cpu_buffer->reader_page;
 	head_page = cpu_buffer->head_page;
 	commit_page = cpu_buffer->commit_page;
-	commit = rb_page_commit(commit_page);
+	commit_ts = commit_page->page->time_stamp;
 
-	return ((iter->head_page == commit_page && iter->head == commit) ||
+	/*
+	 * When the writer goes across pages, it issues a cmpxchg which
+	 * is a mb(), which will synchronize with the rmb here.
+	 * (see rb_tail_page_update())
+	 */
+	smp_rmb();
+	commit = rb_page_commit(commit_page);
+	/* We want to make sure that the commit page doesn't change */
+	smp_rmb();
+
+	/* Make sure commit page didn't change */
+	curr_commit_page = READ_ONCE(cpu_buffer->commit_page);
+	curr_commit_ts = READ_ONCE(curr_commit_page->page->time_stamp);
+
+	/* If the commit page changed, then there's more data */
+	if (curr_commit_page != commit_page ||
+	    curr_commit_ts != commit_ts)
+		return 0;
+
+	/* Still racy, as it may return a false positive, but that's OK */
+	return ((iter->head_page == commit_page && iter->head >= commit) ||
 		(iter->head_page == reader && commit_page == head_page &&
 		 head_page->read == commit &&
 		 iter->head == rb_page_commit(cpu_buffer->reader_page)));
@@ -3828,15 +3923,22 @@ static void rb_advance_reader(struct ring_buffer_per_cpu *cpu_buffer)
 static void rb_advance_iter(struct ring_buffer_iter *iter)
 {
 	struct ring_buffer_per_cpu *cpu_buffer;
-	struct ring_buffer_event *event;
-	unsigned length;
 
 	cpu_buffer = iter->cpu_buffer;
 
+	/* If head == next_event then we need to jump to the next event */
+	if (iter->head == iter->next_event) {
+		/* If the event gets overwritten again, there's nothing to do */
+		if (rb_iter_head_event(iter) == NULL)
+			return;
+	}
+
+	iter->head = iter->next_event;
+
 	/*
 	 * Check if we are at the end of the buffer.
 	 */
-	if (iter->head >= rb_page_size(iter->head_page)) {
+	if (iter->next_event >= rb_page_size(iter->head_page)) {
 		/* discarded commits can make the page empty */
 		if (iter->head_page == cpu_buffer->commit_page)
 			return;
@@ -3844,27 +3946,7 @@ static void rb_advance_iter(struct ring_buffer_iter *iter)
 		return;
 	}
 
-	event = rb_iter_head_event(iter);
-
-	length = rb_event_length(event);
-
-	/*
-	 * This should not be called to advance the header if we are
-	 * at the tail of the buffer.
-	 */
-	if (RB_WARN_ON(cpu_buffer,
-		       (iter->head_page == cpu_buffer->commit_page) &&
-		       (iter->head + length > rb_commit_index(cpu_buffer))))
-		return;
-
-	rb_update_iter_read_stamp(iter, event);
-
-	iter->head += length;
-
-	/* check for end of page padding */
-	if ((iter->head >= rb_page_size(iter->head_page)) &&
-	    (iter->head_page != cpu_buffer->commit_page))
-		rb_inc_iter(iter);
+	rb_update_iter_read_stamp(iter, iter->event);
 }
 
 static int rb_lost_events(struct ring_buffer_per_cpu *cpu_buffer)
@@ -3952,6 +4034,7 @@ rb_iter_peek(struct ring_buffer_iter *iter, u64 *ts)
 	struct ring_buffer_per_cpu *cpu_buffer;
 	struct ring_buffer_event *event;
 	int nr_loops = 0;
+	bool failed = false;
 
 	if (ts)
 		*ts = 0;
@@ -3978,10 +4061,14 @@ rb_iter_peek(struct ring_buffer_iter *iter, u64 *ts)
 	 * to a data event, we should never loop more than three times.
 	 * Once for going to next page, once on time extend, and
 	 * finally once to get the event.
-	 * (We never hit the following condition more than thrice).
+	 * We should never hit the following condition more than thrice,
+	 * unless the buffer is very small, and there's a writer
+	 * that is causing the reader to fail getting an event.
 	 */
-	if (RB_WARN_ON(cpu_buffer, ++nr_loops > 3))
+	if (++nr_loops > 3) {
+		RB_WARN_ON(cpu_buffer, !failed);
 		return NULL;
+	}
 
 	if (rb_per_cpu_empty(cpu_buffer))
 		return NULL;
@@ -3992,6 +4079,10 @@ rb_iter_peek(struct ring_buffer_iter *iter, u64 *ts)
 	}
 
 	event = rb_iter_head_event(iter);
+	if (!event) {
+		failed = true;
+		goto again;
+	}
 
 	switch (event->type_len) {
 	case RINGBUF_TYPE_PADDING:
@@ -4102,6 +4193,20 @@ ring_buffer_peek(struct trace_buffer *buffer, int cpu, u64 *ts,
 	return event;
 }
 
+/** ring_buffer_iter_dropped - report if there are dropped events
+ * @iter: The ring buffer iterator
+ *
+ * Returns true if there was dropped events since the last peek.
+ */
+bool ring_buffer_iter_dropped(struct ring_buffer_iter *iter)
+{
+	bool ret = iter->missed_events != 0;
+
+	iter->missed_events = 0;
+	return ret;
+}
+EXPORT_SYMBOL_GPL(ring_buffer_iter_dropped);
+
 /**
  * ring_buffer_iter_peek - peek at the next event to be read
  * @iter: The ring buffer iterator
@@ -4208,16 +4313,21 @@ ring_buffer_read_prepare(struct trace_buffer *buffer, int cpu, gfp_t flags)
 	if (!cpumask_test_cpu(cpu, buffer->cpumask))
 		return NULL;
 
-	iter = kmalloc(sizeof(*iter), flags);
+	iter = kzalloc(sizeof(*iter), flags);
 	if (!iter)
 		return NULL;
 
+	iter->event = kmalloc(BUF_MAX_DATA_SIZE, flags);
+	if (!iter->event) {
+		kfree(iter);
+		return NULL;
+	}
+
 	cpu_buffer = buffer->buffers[cpu];
 
 	iter->cpu_buffer = cpu_buffer;
 
-	atomic_inc(&buffer->resize_disabled);
-	atomic_inc(&cpu_buffer->record_disabled);
+	atomic_inc(&cpu_buffer->resize_disabled);
 
 	return iter;
 }
@@ -4290,42 +4400,31 @@ ring_buffer_read_finish(struct ring_buffer_iter *iter)
 	rb_check_pages(cpu_buffer);
 	raw_spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags);
 
-	atomic_dec(&cpu_buffer->record_disabled);
-	atomic_dec(&cpu_buffer->buffer->resize_disabled);
+	atomic_dec(&cpu_buffer->resize_disabled);
+	kfree(iter->event);
 	kfree(iter);
 }
 EXPORT_SYMBOL_GPL(ring_buffer_read_finish);
 
 /**
- * ring_buffer_read - read the next item in the ring buffer by the iterator
+ * ring_buffer_iter_advance - advance the iterator to the next location
  * @iter: The ring buffer iterator
- * @ts: The time stamp of the event read.
  *
- * This reads the next event in the ring buffer and increments the iterator.
+ * Move the location of the iterator such that the next read will
+ * be the next location of the iterator.
  */
-struct ring_buffer_event *
-ring_buffer_read(struct ring_buffer_iter *iter, u64 *ts)
+void ring_buffer_iter_advance(struct ring_buffer_iter *iter)
 {
-	struct ring_buffer_event *event;
 	struct ring_buffer_per_cpu *cpu_buffer = iter->cpu_buffer;
 	unsigned long flags;
 
 	raw_spin_lock_irqsave(&cpu_buffer->reader_lock, flags);
- again:
-	event = rb_iter_peek(iter, ts);
-	if (!event)
-		goto out;
-
-	if (event->type_len == RINGBUF_TYPE_PADDING)
-		goto again;
 
 	rb_advance_iter(iter);
- out:
-	raw_spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags);
 
-	return event;
+	raw_spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags);
 }
-EXPORT_SYMBOL_GPL(ring_buffer_read);
+EXPORT_SYMBOL_GPL(ring_buffer_iter_advance);
 
 /**
  * ring_buffer_size - return the size of the ring buffer (in bytes)
@@ -4406,7 +4505,7 @@ void ring_buffer_reset_cpu(struct trace_buffer *buffer, int cpu)
 	if (!cpumask_test_cpu(cpu, buffer->cpumask))
 		return;
 
-	atomic_inc(&buffer->resize_disabled);
+	atomic_inc(&cpu_buffer->resize_disabled);
 	atomic_inc(&cpu_buffer->record_disabled);
 
 	/* Make sure all commits have finished */
@@ -4427,7 +4526,7 @@ void ring_buffer_reset_cpu(struct trace_buffer *buffer, int cpu)
 	raw_spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags);
 
 	atomic_dec(&cpu_buffer->record_disabled);
-	atomic_dec(&buffer->resize_disabled);
+	atomic_dec(&cpu_buffer->resize_disabled);
 }
 EXPORT_SYMBOL_GPL(ring_buffer_reset_cpu);
 
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 6b11e4e..8d2b988 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -386,16 +386,22 @@ trace_find_filtered_pid(struct trace_pid_list *filtered_pids, pid_t search_pid)
  * Returns false if @task should be traced.
  */
 bool
-trace_ignore_this_task(struct trace_pid_list *filtered_pids, struct task_struct *task)
+trace_ignore_this_task(struct trace_pid_list *filtered_pids,
+		       struct trace_pid_list *filtered_no_pids,
+		       struct task_struct *task)
 {
 	/*
-	 * Return false, because if filtered_pids does not exist,
-	 * all pids are good to trace.
+	 * If filterd_no_pids is not empty, and the task's pid is listed
+	 * in filtered_no_pids, then return true.
+	 * Otherwise, if filtered_pids is empty, that means we can
+	 * trace all tasks. If it has content, then only trace pids
+	 * within filtered_pids.
 	 */
-	if (!filtered_pids)
-		return false;
 
-	return !trace_find_filtered_pid(filtered_pids, task->pid);
+	return (filtered_pids &&
+		!trace_find_filtered_pid(filtered_pids, task->pid)) ||
+		(filtered_no_pids &&
+		 trace_find_filtered_pid(filtered_no_pids, task->pid));
 }
 
 /**
@@ -3378,7 +3384,7 @@ static void trace_iterator_increment(struct trace_iterator *iter)
 
 	iter->idx++;
 	if (buf_iter)
-		ring_buffer_read(buf_iter, NULL);
+		ring_buffer_iter_advance(buf_iter);
 }
 
 static struct trace_entry *
@@ -3388,11 +3394,15 @@ peek_next_entry(struct trace_iterator *iter, int cpu, u64 *ts,
 	struct ring_buffer_event *event;
 	struct ring_buffer_iter *buf_iter = trace_buffer_iter(iter, cpu);
 
-	if (buf_iter)
+	if (buf_iter) {
 		event = ring_buffer_iter_peek(buf_iter, ts);
-	else
+		if (lost_events)
+			*lost_events = ring_buffer_iter_dropped(buf_iter) ?
+				(unsigned long)-1 : 0;
+	} else {
 		event = ring_buffer_peek(iter->array_buffer->buffer, cpu, ts,
 					 lost_events);
+	}
 
 	if (event) {
 		iter->ent_size = ring_buffer_event_length(event);
@@ -3462,11 +3472,51 @@ __find_next_entry(struct trace_iterator *iter, int *ent_cpu,
 	return next;
 }
 
+#define STATIC_TEMP_BUF_SIZE	128
+static char static_temp_buf[STATIC_TEMP_BUF_SIZE];
+
 /* Find the next real entry, without updating the iterator itself */
 struct trace_entry *trace_find_next_entry(struct trace_iterator *iter,
 					  int *ent_cpu, u64 *ent_ts)
 {
-	return __find_next_entry(iter, ent_cpu, NULL, ent_ts);
+	/* __find_next_entry will reset ent_size */
+	int ent_size = iter->ent_size;
+	struct trace_entry *entry;
+
+	/*
+	 * If called from ftrace_dump(), then the iter->temp buffer
+	 * will be the static_temp_buf and not created from kmalloc.
+	 * If the entry size is greater than the buffer, we can
+	 * not save it. Just return NULL in that case. This is only
+	 * used to add markers when two consecutive events' time
+	 * stamps have a large delta. See trace_print_lat_context()
+	 */
+	if (iter->temp == static_temp_buf &&
+	    STATIC_TEMP_BUF_SIZE < ent_size)
+		return NULL;
+
+	/*
+	 * The __find_next_entry() may call peek_next_entry(), which may
+	 * call ring_buffer_peek() that may make the contents of iter->ent
+	 * undefined. Need to copy iter->ent now.
+	 */
+	if (iter->ent && iter->ent != iter->temp) {
+		if ((!iter->temp || iter->temp_size < iter->ent_size) &&
+		    !WARN_ON_ONCE(iter->temp == static_temp_buf)) {
+			kfree(iter->temp);
+			iter->temp = kmalloc(iter->ent_size, GFP_KERNEL);
+			if (!iter->temp)
+				return NULL;
+		}
+		memcpy(iter->temp, iter->ent, iter->ent_size);
+		iter->temp_size = iter->ent_size;
+		iter->ent = iter->temp;
+	}
+	entry = __find_next_entry(iter, ent_cpu, NULL, ent_ts);
+	/* Put back the original ent_size */
+	iter->ent_size = ent_size;
+
+	return entry;
 }
 
 /* Find the next real entry, and increment the iterator to the next entry */
@@ -3538,7 +3588,7 @@ void tracing_iter_reset(struct trace_iterator *iter, int cpu)
 		if (ts >= iter->array_buffer->time_start)
 			break;
 		entries++;
-		ring_buffer_read(buf_iter, NULL);
+		ring_buffer_iter_advance(buf_iter);
 	}
 
 	per_cpu_ptr(iter->array_buffer->data, cpu)->skipped_entries = entries;
@@ -3981,8 +4031,12 @@ enum print_line_t print_trace_line(struct trace_iterator *iter)
 	enum print_line_t ret;
 
 	if (iter->lost_events) {
-		trace_seq_printf(&iter->seq, "CPU:%d [LOST %lu EVENTS]\n",
-				 iter->cpu, iter->lost_events);
+		if (iter->lost_events == (unsigned long)-1)
+			trace_seq_printf(&iter->seq, "CPU:%d [LOST EVENTS]\n",
+					 iter->cpu);
+		else
+			trace_seq_printf(&iter->seq, "CPU:%d [LOST %lu EVENTS]\n",
+					 iter->cpu, iter->lost_events);
 		if (trace_seq_has_overflowed(&iter->seq))
 			return TRACE_TYPE_PARTIAL_LINE;
 	}
@@ -4198,6 +4252,18 @@ __tracing_open(struct inode *inode, struct file *file, bool snapshot)
 		goto release;
 
 	/*
+	 * trace_find_next_entry() may need to save off iter->ent.
+	 * It will place it into the iter->temp buffer. As most
+	 * events are less than 128, allocate a buffer of that size.
+	 * If one is greater, then trace_find_next_entry() will
+	 * allocate a new buffer to adjust for the bigger iter->ent.
+	 * It's not critical if it fails to get allocated here.
+	 */
+	iter->temp = kmalloc(128, GFP_KERNEL);
+	if (iter->temp)
+		iter->temp_size = 128;
+
+	/*
 	 * We make a copy of the current tracer to avoid concurrent
 	 * changes on it while we are reading.
 	 */
@@ -4237,8 +4303,11 @@ __tracing_open(struct inode *inode, struct file *file, bool snapshot)
 	if (trace_clocks[tr->clock_id].in_ns)
 		iter->iter_flags |= TRACE_FILE_TIME_IN_NS;
 
-	/* stop the trace while dumping if we are not opening "snapshot" */
-	if (!iter->snapshot)
+	/*
+	 * If pause-on-trace is enabled, then stop the trace while
+	 * dumping, unless this is the "snapshot" file
+	 */
+	if (!iter->snapshot && (tr->trace_flags & TRACE_ITER_PAUSE_ON_TRACE))
 		tracing_stop_tr(tr);
 
 	if (iter->cpu_file == RING_BUFFER_ALL_CPUS) {
@@ -4269,6 +4338,7 @@ __tracing_open(struct inode *inode, struct file *file, bool snapshot)
  fail:
 	mutex_unlock(&trace_types_lock);
 	kfree(iter->trace);
+	kfree(iter->temp);
 	kfree(iter->buffer_iter);
 release:
 	seq_release_private(inode, file);
@@ -4334,7 +4404,7 @@ static int tracing_release(struct inode *inode, struct file *file)
 	if (iter->trace && iter->trace->close)
 		iter->trace->close(iter);
 
-	if (!iter->snapshot)
+	if (!iter->snapshot && tr->stop_count)
 		/* reenable tracing if it was previously enabled */
 		tracing_start_tr(tr);
 
@@ -4344,6 +4414,7 @@ static int tracing_release(struct inode *inode, struct file *file)
 
 	mutex_destroy(&iter->mutex);
 	free_cpumask_var(iter->started);
+	kfree(iter->temp);
 	kfree(iter->trace);
 	kfree(iter->buffer_iter);
 	seq_release_private(inode, file);
@@ -4964,6 +5035,8 @@ static const char readme_msg[] =
 #ifdef CONFIG_FUNCTION_TRACER
 	"  set_ftrace_pid\t- Write pid(s) to only function trace those pids\n"
 	"\t\t    (function)\n"
+	"  set_ftrace_notrace_pid\t- Write pid(s) to not function trace those pids\n"
+	"\t\t    (function)\n"
 #endif
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 	"  set_graph_function\t- Trace the nested calls of a function (function_graph)\n"
@@ -9146,6 +9219,9 @@ void ftrace_dump(enum ftrace_dump_mode oops_dump_mode)
 
 	/* Simulate the iterator */
 	trace_init_global_iter(&iter);
+	/* Can not use kmalloc for iter.temp */
+	iter.temp = static_temp_buf;
+	iter.temp_size = STATIC_TEMP_BUF_SIZE;
 
 	for_each_tracing_cpu(cpu) {
 		atomic_inc(&per_cpu_ptr(iter.array_buffer->data, cpu)->disabled);
@@ -9334,7 +9410,7 @@ __init static int tracer_alloc_buffers(void)
 		goto out_free_buffer_mask;
 
 	/* Only allocate trace_printk buffers if a trace_printk exists */
-	if (__stop___trace_bprintk_fmt != __start___trace_bprintk_fmt)
+	if (&__stop___trace_bprintk_fmt != &__start___trace_bprintk_fmt)
 		/* Must be called before global_trace.buffer is allocated */
 		trace_printk_init_buffers();
 
diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h
index 99372dd..4eb1d00 100644
--- a/kernel/trace/trace.h
+++ b/kernel/trace/trace.h
@@ -178,10 +178,10 @@ struct trace_array_cpu {
 	kuid_t			uid;
 	char			comm[TASK_COMM_LEN];
 
-	bool			ignore_pid;
 #ifdef CONFIG_FUNCTION_TRACER
-	bool			ftrace_ignore_pid;
+	int			ftrace_ignore_pid;
 #endif
+	bool			ignore_pid;
 };
 
 struct tracer;
@@ -207,6 +207,30 @@ struct trace_pid_list {
 	unsigned long			*pids;
 };
 
+enum {
+	TRACE_PIDS		= BIT(0),
+	TRACE_NO_PIDS		= BIT(1),
+};
+
+static inline bool pid_type_enabled(int type, struct trace_pid_list *pid_list,
+				    struct trace_pid_list *no_pid_list)
+{
+	/* Return true if the pid list in type has pids */
+	return ((type & TRACE_PIDS) && pid_list) ||
+		((type & TRACE_NO_PIDS) && no_pid_list);
+}
+
+static inline bool still_need_pid_events(int type, struct trace_pid_list *pid_list,
+					 struct trace_pid_list *no_pid_list)
+{
+	/*
+	 * Turning off what is in @type, return true if the "other"
+	 * pid list, still has pids in it.
+	 */
+	return (!(type & TRACE_PIDS) && pid_list) ||
+		(!(type & TRACE_NO_PIDS) && no_pid_list);
+}
+
 typedef bool (*cond_update_fn_t)(struct trace_array *tr, void *cond_data);
 
 /**
@@ -285,6 +309,7 @@ struct trace_array {
 #endif
 #endif
 	struct trace_pid_list	__rcu *filtered_pids;
+	struct trace_pid_list	__rcu *filtered_no_pids;
 	/*
 	 * max_lock is used to protect the swapping of buffers
 	 * when taking a max snapshot. The buffers themselves are
@@ -331,6 +356,7 @@ struct trace_array {
 #ifdef CONFIG_FUNCTION_TRACER
 	struct ftrace_ops	*ops;
 	struct trace_pid_list	__rcu *function_pids;
+	struct trace_pid_list	__rcu *function_no_pids;
 #ifdef CONFIG_DYNAMIC_FTRACE
 	/* All of these are protected by the ftrace_lock */
 	struct list_head	func_probes;
@@ -557,12 +583,7 @@ struct tracer {
  * caller, and we can skip the current check.
  */
 enum {
-	TRACE_BUFFER_BIT,
-	TRACE_BUFFER_NMI_BIT,
-	TRACE_BUFFER_IRQ_BIT,
-	TRACE_BUFFER_SIRQ_BIT,
-
-	/* Start of function recursion bits */
+	/* Function recursion bits */
 	TRACE_FTRACE_BIT,
 	TRACE_FTRACE_NMI_BIT,
 	TRACE_FTRACE_IRQ_BIT,
@@ -787,6 +808,7 @@ extern int pid_max;
 bool trace_find_filtered_pid(struct trace_pid_list *filtered_pids,
 			     pid_t search_pid);
 bool trace_ignore_this_task(struct trace_pid_list *filtered_pids,
+			    struct trace_pid_list *filtered_no_pids,
 			    struct task_struct *task);
 void trace_filter_add_remove_task(struct trace_pid_list *pid_list,
 				  struct task_struct *self,
@@ -1307,6 +1329,7 @@ extern int trace_get_user(struct trace_parser *parser, const char __user *ubuf,
 		C(IRQ_INFO,		"irq-info"),		\
 		C(MARKERS,		"markers"),		\
 		C(EVENT_FORK,		"event-fork"),		\
+		C(PAUSE_ON_TRACE,	"pause-on-trace"),	\
 		FUNCTION_FLAGS					\
 		FGRAPH_FLAGS					\
 		STACK_FLAGS					\
diff --git a/kernel/trace/trace_entries.h b/kernel/trace/trace_entries.h
index f22746f..a523da0 100644
--- a/kernel/trace/trace_entries.h
+++ b/kernel/trace/trace_entries.h
@@ -325,14 +325,16 @@ FTRACE_ENTRY(hwlat, hwlat_entry,
 		__field_desc(	long,	timestamp,	tv_nsec		)
 		__field(	unsigned int,		nmi_count	)
 		__field(	unsigned int,		seqnum		)
+		__field(	unsigned int,		count		)
 	),
 
-	F_printk("cnt:%u\tts:%010llu.%010lu\tinner:%llu\touter:%llu\tnmi-ts:%llu\tnmi-count:%u\n",
+	F_printk("cnt:%u\tts:%010llu.%010lu\tinner:%llu\touter:%llu\tcount:%d\tnmi-ts:%llu\tnmi-count:%u\n",
 		 __entry->seqnum,
 		 __entry->tv_sec,
 		 __entry->tv_nsec,
 		 __entry->duration,
 		 __entry->outer_duration,
+		 __entry->count,
 		 __entry->nmi_total_ts,
 		 __entry->nmi_count)
 );
diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c
index f38234e..242f59e 100644
--- a/kernel/trace/trace_events.c
+++ b/kernel/trace/trace_events.c
@@ -232,10 +232,13 @@ bool trace_event_ignore_this_pid(struct trace_event_file *trace_file)
 {
 	struct trace_array *tr = trace_file->tr;
 	struct trace_array_cpu *data;
+	struct trace_pid_list *no_pid_list;
 	struct trace_pid_list *pid_list;
 
 	pid_list = rcu_dereference_raw(tr->filtered_pids);
-	if (!pid_list)
+	no_pid_list = rcu_dereference_raw(tr->filtered_no_pids);
+
+	if (!pid_list && !no_pid_list)
 		return false;
 
 	data = this_cpu_ptr(tr->array_buffer.data);
@@ -510,6 +513,9 @@ event_filter_pid_sched_process_exit(void *data, struct task_struct *task)
 
 	pid_list = rcu_dereference_raw(tr->filtered_pids);
 	trace_filter_add_remove_task(pid_list, NULL, task);
+
+	pid_list = rcu_dereference_raw(tr->filtered_no_pids);
+	trace_filter_add_remove_task(pid_list, NULL, task);
 }
 
 static void
@@ -522,6 +528,9 @@ event_filter_pid_sched_process_fork(void *data,
 
 	pid_list = rcu_dereference_sched(tr->filtered_pids);
 	trace_filter_add_remove_task(pid_list, self, task);
+
+	pid_list = rcu_dereference_sched(tr->filtered_no_pids);
+	trace_filter_add_remove_task(pid_list, self, task);
 }
 
 void trace_event_follow_fork(struct trace_array *tr, bool enable)
@@ -544,13 +553,23 @@ event_filter_pid_sched_switch_probe_pre(void *data, bool preempt,
 		    struct task_struct *prev, struct task_struct *next)
 {
 	struct trace_array *tr = data;
+	struct trace_pid_list *no_pid_list;
 	struct trace_pid_list *pid_list;
+	bool ret;
 
 	pid_list = rcu_dereference_sched(tr->filtered_pids);
+	no_pid_list = rcu_dereference_sched(tr->filtered_no_pids);
 
-	this_cpu_write(tr->array_buffer.data->ignore_pid,
-		       trace_ignore_this_task(pid_list, prev) &&
-		       trace_ignore_this_task(pid_list, next));
+	/*
+	 * Sched switch is funny, as we only want to ignore it
+	 * in the notrace case if both prev and next should be ignored.
+	 */
+	ret = trace_ignore_this_task(NULL, no_pid_list, prev) &&
+		trace_ignore_this_task(NULL, no_pid_list, next);
+
+	this_cpu_write(tr->array_buffer.data->ignore_pid, ret ||
+		       (trace_ignore_this_task(pid_list, NULL, prev) &&
+			trace_ignore_this_task(pid_list, NULL, next)));
 }
 
 static void
@@ -558,18 +577,21 @@ event_filter_pid_sched_switch_probe_post(void *data, bool preempt,
 		    struct task_struct *prev, struct task_struct *next)
 {
 	struct trace_array *tr = data;
+	struct trace_pid_list *no_pid_list;
 	struct trace_pid_list *pid_list;
 
 	pid_list = rcu_dereference_sched(tr->filtered_pids);
+	no_pid_list = rcu_dereference_sched(tr->filtered_no_pids);
 
 	this_cpu_write(tr->array_buffer.data->ignore_pid,
-		       trace_ignore_this_task(pid_list, next));
+		       trace_ignore_this_task(pid_list, no_pid_list, next));
 }
 
 static void
 event_filter_pid_sched_wakeup_probe_pre(void *data, struct task_struct *task)
 {
 	struct trace_array *tr = data;
+	struct trace_pid_list *no_pid_list;
 	struct trace_pid_list *pid_list;
 
 	/* Nothing to do if we are already tracing */
@@ -577,15 +599,17 @@ event_filter_pid_sched_wakeup_probe_pre(void *data, struct task_struct *task)
 		return;
 
 	pid_list = rcu_dereference_sched(tr->filtered_pids);
+	no_pid_list = rcu_dereference_sched(tr->filtered_no_pids);
 
 	this_cpu_write(tr->array_buffer.data->ignore_pid,
-		       trace_ignore_this_task(pid_list, task));
+		       trace_ignore_this_task(pid_list, no_pid_list, task));
 }
 
 static void
 event_filter_pid_sched_wakeup_probe_post(void *data, struct task_struct *task)
 {
 	struct trace_array *tr = data;
+	struct trace_pid_list *no_pid_list;
 	struct trace_pid_list *pid_list;
 
 	/* Nothing to do if we are not tracing */
@@ -593,23 +617,15 @@ event_filter_pid_sched_wakeup_probe_post(void *data, struct task_struct *task)
 		return;
 
 	pid_list = rcu_dereference_sched(tr->filtered_pids);
+	no_pid_list = rcu_dereference_sched(tr->filtered_no_pids);
 
 	/* Set tracing if current is enabled */
 	this_cpu_write(tr->array_buffer.data->ignore_pid,
-		       trace_ignore_this_task(pid_list, current));
+		       trace_ignore_this_task(pid_list, no_pid_list, current));
 }
 
-static void __ftrace_clear_event_pids(struct trace_array *tr)
+static void unregister_pid_events(struct trace_array *tr)
 {
-	struct trace_pid_list *pid_list;
-	struct trace_event_file *file;
-	int cpu;
-
-	pid_list = rcu_dereference_protected(tr->filtered_pids,
-					     lockdep_is_held(&event_mutex));
-	if (!pid_list)
-		return;
-
 	unregister_trace_sched_switch(event_filter_pid_sched_switch_probe_pre, tr);
 	unregister_trace_sched_switch(event_filter_pid_sched_switch_probe_post, tr);
 
@@ -621,26 +637,55 @@ static void __ftrace_clear_event_pids(struct trace_array *tr)
 
 	unregister_trace_sched_waking(event_filter_pid_sched_wakeup_probe_pre, tr);
 	unregister_trace_sched_waking(event_filter_pid_sched_wakeup_probe_post, tr);
+}
 
-	list_for_each_entry(file, &tr->events, list) {
-		clear_bit(EVENT_FILE_FL_PID_FILTER_BIT, &file->flags);
+static void __ftrace_clear_event_pids(struct trace_array *tr, int type)
+{
+	struct trace_pid_list *pid_list;
+	struct trace_pid_list *no_pid_list;
+	struct trace_event_file *file;
+	int cpu;
+
+	pid_list = rcu_dereference_protected(tr->filtered_pids,
+					     lockdep_is_held(&event_mutex));
+	no_pid_list = rcu_dereference_protected(tr->filtered_no_pids,
+					     lockdep_is_held(&event_mutex));
+
+	/* Make sure there's something to do */
+	if (!pid_type_enabled(type, pid_list, no_pid_list))
+		return;
+
+	if (!still_need_pid_events(type, pid_list, no_pid_list)) {
+		unregister_pid_events(tr);
+
+		list_for_each_entry(file, &tr->events, list) {
+			clear_bit(EVENT_FILE_FL_PID_FILTER_BIT, &file->flags);
+		}
+
+		for_each_possible_cpu(cpu)
+			per_cpu_ptr(tr->array_buffer.data, cpu)->ignore_pid = false;
 	}
 
-	for_each_possible_cpu(cpu)
-		per_cpu_ptr(tr->array_buffer.data, cpu)->ignore_pid = false;
+	if (type & TRACE_PIDS)
+		rcu_assign_pointer(tr->filtered_pids, NULL);
 
-	rcu_assign_pointer(tr->filtered_pids, NULL);
+	if (type & TRACE_NO_PIDS)
+		rcu_assign_pointer(tr->filtered_no_pids, NULL);
 
 	/* Wait till all users are no longer using pid filtering */
 	tracepoint_synchronize_unregister();
 
-	trace_free_pid_list(pid_list);
+	if ((type & TRACE_PIDS) && pid_list)
+		trace_free_pid_list(pid_list);
+
+	if ((type & TRACE_NO_PIDS) && no_pid_list)
+		trace_free_pid_list(no_pid_list);
 }
 
-static void ftrace_clear_event_pids(struct trace_array *tr)
+static void ftrace_clear_event_pids(struct trace_array *tr, int type)
 {
 	mutex_lock(&event_mutex);
-	__ftrace_clear_event_pids(tr);
+	__ftrace_clear_event_pids(tr, type);
 	mutex_unlock(&event_mutex);
 }
 
@@ -1013,15 +1058,32 @@ static void t_stop(struct seq_file *m, void *p)
 }
 
 static void *
-p_next(struct seq_file *m, void *v, loff_t *pos)
+__next(struct seq_file *m, void *v, loff_t *pos, int type)
 {
 	struct trace_array *tr = m->private;
-	struct trace_pid_list *pid_list = rcu_dereference_sched(tr->filtered_pids);
+	struct trace_pid_list *pid_list;
+
+	if (type == TRACE_PIDS)
+		pid_list = rcu_dereference_sched(tr->filtered_pids);
+	else
+		pid_list = rcu_dereference_sched(tr->filtered_no_pids);
 
 	return trace_pid_next(pid_list, v, pos);
 }
 
-static void *p_start(struct seq_file *m, loff_t *pos)
+static void *
+p_next(struct seq_file *m, void *v, loff_t *pos)
+{
+	return __next(m, v, pos, TRACE_PIDS);
+}
+
+static void *
+np_next(struct seq_file *m, void *v, loff_t *pos)
+{
+	return __next(m, v, pos, TRACE_NO_PIDS);
+}
+
+static void *__start(struct seq_file *m, loff_t *pos, int type)
 	__acquires(RCU)
 {
 	struct trace_pid_list *pid_list;
@@ -1036,7 +1098,10 @@ static void *p_start(struct seq_file *m, loff_t *pos)
 	mutex_lock(&event_mutex);
 	rcu_read_lock_sched();
 
-	pid_list = rcu_dereference_sched(tr->filtered_pids);
+	if (type == TRACE_PIDS)
+		pid_list = rcu_dereference_sched(tr->filtered_pids);
+	else
+		pid_list = rcu_dereference_sched(tr->filtered_no_pids);
 
 	if (!pid_list)
 		return NULL;
@@ -1044,6 +1109,18 @@ static void *p_start(struct seq_file *m, loff_t *pos)
 	return trace_pid_start(pid_list, pos);
 }
 
+static void *p_start(struct seq_file *m, loff_t *pos)
+	__acquires(RCU)
+{
+	return __start(m, pos, TRACE_PIDS);
+}
+
+static void *np_start(struct seq_file *m, loff_t *pos)
+	__acquires(RCU)
+{
+	return __start(m, pos, TRACE_NO_PIDS);
+}
+
 static void p_stop(struct seq_file *m, void *p)
 	__releases(RCU)
 {
@@ -1588,6 +1665,7 @@ static void ignore_task_cpu(void *data)
 {
 	struct trace_array *tr = data;
 	struct trace_pid_list *pid_list;
+	struct trace_pid_list *no_pid_list;
 
 	/*
 	 * This function is called by on_each_cpu() while the
@@ -1595,18 +1673,50 @@ static void ignore_task_cpu(void *data)
 	 */
 	pid_list = rcu_dereference_protected(tr->filtered_pids,
 					     mutex_is_locked(&event_mutex));
+	no_pid_list = rcu_dereference_protected(tr->filtered_no_pids,
+					     mutex_is_locked(&event_mutex));
 
 	this_cpu_write(tr->array_buffer.data->ignore_pid,
-		       trace_ignore_this_task(pid_list, current));
+		       trace_ignore_this_task(pid_list, no_pid_list, current));
+}
+
+static void register_pid_events(struct trace_array *tr)
+{
+	/*
+	 * Register a probe that is called before all other probes
+	 * to set ignore_pid if next or prev do not match.
+	 * Register a probe this is called after all other probes
+	 * to only keep ignore_pid set if next pid matches.
+	 */
+	register_trace_prio_sched_switch(event_filter_pid_sched_switch_probe_pre,
+					 tr, INT_MAX);
+	register_trace_prio_sched_switch(event_filter_pid_sched_switch_probe_post,
+					 tr, 0);
+
+	register_trace_prio_sched_wakeup(event_filter_pid_sched_wakeup_probe_pre,
+					 tr, INT_MAX);
+	register_trace_prio_sched_wakeup(event_filter_pid_sched_wakeup_probe_post,
+					 tr, 0);
+
+	register_trace_prio_sched_wakeup_new(event_filter_pid_sched_wakeup_probe_pre,
+					     tr, INT_MAX);
+	register_trace_prio_sched_wakeup_new(event_filter_pid_sched_wakeup_probe_post,
+					     tr, 0);
+
+	register_trace_prio_sched_waking(event_filter_pid_sched_wakeup_probe_pre,
+					 tr, INT_MAX);
+	register_trace_prio_sched_waking(event_filter_pid_sched_wakeup_probe_post,
+					 tr, 0);
 }
 
 static ssize_t
-ftrace_event_pid_write(struct file *filp, const char __user *ubuf,
-		       size_t cnt, loff_t *ppos)
+event_pid_write(struct file *filp, const char __user *ubuf,
+		size_t cnt, loff_t *ppos, int type)
 {
 	struct seq_file *m = filp->private_data;
 	struct trace_array *tr = m->private;
 	struct trace_pid_list *filtered_pids = NULL;
+	struct trace_pid_list *other_pids = NULL;
 	struct trace_pid_list *pid_list;
 	struct trace_event_file *file;
 	ssize_t ret;
@@ -1620,14 +1730,26 @@ ftrace_event_pid_write(struct file *filp, const char __user *ubuf,
 
 	mutex_lock(&event_mutex);
 
-	filtered_pids = rcu_dereference_protected(tr->filtered_pids,
-					     lockdep_is_held(&event_mutex));
+	if (type == TRACE_PIDS) {
+		filtered_pids = rcu_dereference_protected(tr->filtered_pids,
+							  lockdep_is_held(&event_mutex));
+		other_pids = rcu_dereference_protected(tr->filtered_no_pids,
+							  lockdep_is_held(&event_mutex));
+	} else {
+		filtered_pids = rcu_dereference_protected(tr->filtered_no_pids,
+							  lockdep_is_held(&event_mutex));
+		other_pids = rcu_dereference_protected(tr->filtered_pids,
+							  lockdep_is_held(&event_mutex));
+	}
 
 	ret = trace_pid_write(filtered_pids, &pid_list, ubuf, cnt);
 	if (ret < 0)
 		goto out;
 
-	rcu_assign_pointer(tr->filtered_pids, pid_list);
+	if (type == TRACE_PIDS)
+		rcu_assign_pointer(tr->filtered_pids, pid_list);
+	else
+		rcu_assign_pointer(tr->filtered_no_pids, pid_list);
 
 	list_for_each_entry(file, &tr->events, list) {
 		set_bit(EVENT_FILE_FL_PID_FILTER_BIT, &file->flags);
@@ -1636,32 +1758,8 @@ ftrace_event_pid_write(struct file *filp, const char __user *ubuf,
 	if (filtered_pids) {
 		tracepoint_synchronize_unregister();
 		trace_free_pid_list(filtered_pids);
-	} else if (pid_list) {
-		/*
-		 * Register a probe that is called before all other probes
-		 * to set ignore_pid if next or prev do not match.
-		 * Register a probe this is called after all other probes
-		 * to only keep ignore_pid set if next pid matches.
-		 */
-		register_trace_prio_sched_switch(event_filter_pid_sched_switch_probe_pre,
-						 tr, INT_MAX);
-		register_trace_prio_sched_switch(event_filter_pid_sched_switch_probe_post,
-						 tr, 0);
-
-		register_trace_prio_sched_wakeup(event_filter_pid_sched_wakeup_probe_pre,
-						 tr, INT_MAX);
-		register_trace_prio_sched_wakeup(event_filter_pid_sched_wakeup_probe_post,
-						 tr, 0);
-
-		register_trace_prio_sched_wakeup_new(event_filter_pid_sched_wakeup_probe_pre,
-						     tr, INT_MAX);
-		register_trace_prio_sched_wakeup_new(event_filter_pid_sched_wakeup_probe_post,
-						     tr, 0);
-
-		register_trace_prio_sched_waking(event_filter_pid_sched_wakeup_probe_pre,
-						 tr, INT_MAX);
-		register_trace_prio_sched_waking(event_filter_pid_sched_wakeup_probe_post,
-						 tr, 0);
+	} else if (pid_list && !other_pids) {
+		register_pid_events(tr);
 	}
 
 	/*
@@ -1680,9 +1778,24 @@ ftrace_event_pid_write(struct file *filp, const char __user *ubuf,
 	return ret;
 }
 
+static ssize_t
+ftrace_event_pid_write(struct file *filp, const char __user *ubuf,
+		       size_t cnt, loff_t *ppos)
+{
+	return event_pid_write(filp, ubuf, cnt, ppos, TRACE_PIDS);
+}
+
+static ssize_t
+ftrace_event_npid_write(struct file *filp, const char __user *ubuf,
+			size_t cnt, loff_t *ppos)
+{
+	return event_pid_write(filp, ubuf, cnt, ppos, TRACE_NO_PIDS);
+}
+
 static int ftrace_event_avail_open(struct inode *inode, struct file *file);
 static int ftrace_event_set_open(struct inode *inode, struct file *file);
 static int ftrace_event_set_pid_open(struct inode *inode, struct file *file);
+static int ftrace_event_set_npid_open(struct inode *inode, struct file *file);
 static int ftrace_event_release(struct inode *inode, struct file *file);
 
 static const struct seq_operations show_event_seq_ops = {
@@ -1706,6 +1819,13 @@ static const struct seq_operations show_set_pid_seq_ops = {
 	.stop = p_stop,
 };
 
+static const struct seq_operations show_set_no_pid_seq_ops = {
+	.start = np_start,
+	.next = np_next,
+	.show = trace_pid_show,
+	.stop = p_stop,
+};
+
 static const struct file_operations ftrace_avail_fops = {
 	.open = ftrace_event_avail_open,
 	.read = seq_read,
@@ -1729,6 +1849,14 @@ static const struct file_operations ftrace_set_event_pid_fops = {
 	.release = ftrace_event_release,
 };
 
+static const struct file_operations ftrace_set_event_notrace_pid_fops = {
+	.open = ftrace_event_set_npid_open,
+	.read = seq_read,
+	.write = ftrace_event_npid_write,
+	.llseek = seq_lseek,
+	.release = ftrace_event_release,
+};
+
 static const struct file_operations ftrace_enable_fops = {
 	.open = tracing_open_generic,
 	.read = event_enable_read,
@@ -1858,7 +1986,28 @@ ftrace_event_set_pid_open(struct inode *inode, struct file *file)
 
 	if ((file->f_mode & FMODE_WRITE) &&
 	    (file->f_flags & O_TRUNC))
-		ftrace_clear_event_pids(tr);
+		ftrace_clear_event_pids(tr, TRACE_PIDS);
+
+	ret = ftrace_event_open(inode, file, seq_ops);
+	if (ret < 0)
+		trace_array_put(tr);
+	return ret;
+}
+
+static int
+ftrace_event_set_npid_open(struct inode *inode, struct file *file)
+{
+	const struct seq_operations *seq_ops = &show_set_no_pid_seq_ops;
+	struct trace_array *tr = inode->i_private;
+	int ret;
+
+	ret = tracing_check_open_get_tr(tr);
+	if (ret)
+		return ret;
+
+	if ((file->f_mode & FMODE_WRITE) &&
+	    (file->f_flags & O_TRUNC))
+		ftrace_clear_event_pids(tr, TRACE_NO_PIDS);
 
 	ret = ftrace_event_open(inode, file, seq_ops);
 	if (ret < 0)
@@ -3075,6 +3224,11 @@ create_event_toplevel_files(struct dentry *parent, struct trace_array *tr)
 	if (!entry)
 		pr_warn("Could not create tracefs 'set_event_pid' entry\n");
 
+	entry = tracefs_create_file("set_event_notrace_pid", 0644, parent,
+				    tr, &ftrace_set_event_notrace_pid_fops);
+	if (!entry)
+		pr_warn("Could not create tracefs 'set_event_notrace_pid' entry\n");
+
 	/* ring buffer internal formats */
 	entry = trace_create_file("header_page", 0444, d_events,
 				  ring_buffer_print_page_header,
@@ -3158,7 +3312,7 @@ int event_trace_del_tracer(struct trace_array *tr)
 	clear_event_triggers(tr);
 
 	/* Clear the pid list */
-	__ftrace_clear_event_pids(tr);
+	__ftrace_clear_event_pids(tr, TRACE_PIDS | TRACE_NO_PIDS);
 
 	/* Disable any running events */
 	__ftrace_set_clr_event_nolock(tr, NULL, NULL, NULL, 0);
diff --git a/kernel/trace/trace_events_trigger.c b/kernel/trace/trace_events_trigger.c
index dd34a1b..3a74736 100644
--- a/kernel/trace/trace_events_trigger.c
+++ b/kernel/trace/trace_events_trigger.c
@@ -1088,14 +1088,10 @@ register_snapshot_trigger(char *glob, struct event_trigger_ops *ops,
 			  struct event_trigger_data *data,
 			  struct trace_event_file *file)
 {
-	int ret = register_trigger(glob, ops, data, file);
+	if (tracing_alloc_snapshot_instance(file->tr) != 0)
+		return 0;
 
-	if (ret > 0 && tracing_alloc_snapshot_instance(file->tr) != 0) {
-		unregister_trigger(glob, ops, data, file);
-		ret = 0;
-	}
-
-	return ret;
+	return register_trigger(glob, ops, data, file);
 }
 
 static int
diff --git a/kernel/trace/trace_functions_graph.c b/kernel/trace/trace_functions_graph.c
index 7d71546..4a9c49c 100644
--- a/kernel/trace/trace_functions_graph.c
+++ b/kernel/trace/trace_functions_graph.c
@@ -482,7 +482,7 @@ get_return_for_leaf(struct trace_iterator *iter,
 
 	/* this is a leaf, now advance the iterator */
 	if (ring_iter)
-		ring_buffer_read(ring_iter, NULL);
+		ring_buffer_iter_advance(ring_iter);
 
 	return next;
 }
diff --git a/kernel/trace/trace_hwlat.c b/kernel/trace/trace_hwlat.c
index a48808c..e2be7bb 100644
--- a/kernel/trace/trace_hwlat.c
+++ b/kernel/trace/trace_hwlat.c
@@ -83,6 +83,7 @@ struct hwlat_sample {
 	u64			nmi_total_ts;	/* Total time spent in NMIs */
 	struct timespec64	timestamp;	/* wall time */
 	int			nmi_count;	/* # NMIs during this sample */
+	int			count;		/* # of iteratons over threash */
 };
 
 /* keep the global state somewhere. */
@@ -124,6 +125,7 @@ static void trace_hwlat_sample(struct hwlat_sample *sample)
 	entry->timestamp		= sample->timestamp;
 	entry->nmi_total_ts		= sample->nmi_total_ts;
 	entry->nmi_count		= sample->nmi_count;
+	entry->count			= sample->count;
 
 	if (!call_filter_check_discard(call, entry, buffer, event))
 		trace_buffer_unlock_commit_nostack(buffer, event);
@@ -167,12 +169,14 @@ void trace_hwlat_callback(bool enter)
 static int get_sample(void)
 {
 	struct trace_array *tr = hwlat_trace;
+	struct hwlat_sample s;
 	time_type start, t1, t2, last_t2;
-	s64 diff, total, last_total = 0;
+	s64 diff, outer_diff, total, last_total = 0;
 	u64 sample = 0;
 	u64 thresh = tracing_thresh;
 	u64 outer_sample = 0;
 	int ret = -1;
+	unsigned int count = 0;
 
 	do_div(thresh, NSEC_PER_USEC); /* modifies interval value */
 
@@ -186,6 +190,7 @@ static int get_sample(void)
 
 	init_time(last_t2, 0);
 	start = time_get(); /* start timestamp */
+	outer_diff = 0;
 
 	do {
 
@@ -194,14 +199,14 @@ static int get_sample(void)
 
 		if (time_u64(last_t2)) {
 			/* Check the delta from outer loop (t2 to next t1) */
-			diff = time_to_us(time_sub(t1, last_t2));
+			outer_diff = time_to_us(time_sub(t1, last_t2));
 			/* This shouldn't happen */
-			if (diff < 0) {
+			if (outer_diff < 0) {
 				pr_err(BANNER "time running backwards\n");
 				goto out;
 			}
-			if (diff > outer_sample)
-				outer_sample = diff;
+			if (outer_diff > outer_sample)
+				outer_sample = outer_diff;
 		}
 		last_t2 = t2;
 
@@ -217,6 +222,12 @@ static int get_sample(void)
 		/* This checks the inner loop (t1 to t2) */
 		diff = time_to_us(time_sub(t2, t1));     /* current diff */
 
+		if (diff > thresh || outer_diff > thresh) {
+			if (!count)
+				ktime_get_real_ts64(&s.timestamp);
+			count++;
+		}
+
 		/* This shouldn't happen */
 		if (diff < 0) {
 			pr_err(BANNER "time running backwards\n");
@@ -236,7 +247,6 @@ static int get_sample(void)
 
 	/* If we exceed the threshold value, we have found a hardware latency */
 	if (sample > thresh || outer_sample > thresh) {
-		struct hwlat_sample s;
 		u64 latency;
 
 		ret = 1;
@@ -249,9 +259,9 @@ static int get_sample(void)
 		s.seqnum = hwlat_data.count;
 		s.duration = sample;
 		s.outer_duration = outer_sample;
-		ktime_get_real_ts64(&s.timestamp);
 		s.nmi_total_ts = nmi_total_ts;
 		s.nmi_count = nmi_count;
+		s.count = count;
 		trace_hwlat_sample(&s);
 
 		latency = max(sample, outer_sample);
diff --git a/kernel/trace/trace_kprobe.c b/kernel/trace/trace_kprobe.c
index 362cca5..d0568af 100644
--- a/kernel/trace/trace_kprobe.c
+++ b/kernel/trace/trace_kprobe.c
@@ -1078,6 +1078,8 @@ static int trace_kprobe_show(struct seq_file *m, struct dyn_event *ev)
 	int i;
 
 	seq_putc(m, trace_kprobe_is_return(tk) ? 'r' : 'p');
+	if (trace_kprobe_is_return(tk) && tk->rp.maxactive)
+		seq_printf(m, "%d", tk->rp.maxactive);
 	seq_printf(m, ":%s/%s", trace_probe_group_name(&tk->tp),
 				trace_probe_name(&tk->tp));
 
diff --git a/kernel/trace/trace_output.c b/kernel/trace/trace_output.c
index b490908..9a121e1 100644
--- a/kernel/trace/trace_output.c
+++ b/kernel/trace/trace_output.c
@@ -617,22 +617,19 @@ int trace_print_context(struct trace_iterator *iter)
 
 int trace_print_lat_context(struct trace_iterator *iter)
 {
+	struct trace_entry *entry, *next_entry;
 	struct trace_array *tr = iter->tr;
-	/* trace_find_next_entry will reset ent_size */
-	int ent_size = iter->ent_size;
 	struct trace_seq *s = &iter->seq;
-	u64 next_ts;
-	struct trace_entry *entry = iter->ent,
-			   *next_entry = trace_find_next_entry(iter, NULL,
-							       &next_ts);
 	unsigned long verbose = (tr->trace_flags & TRACE_ITER_VERBOSE);
+	u64 next_ts;
 
-	/* Restore the original ent_size */
-	iter->ent_size = ent_size;
-
+	next_entry = trace_find_next_entry(iter, NULL, &next_ts);
 	if (!next_entry)
 		next_ts = iter->ts;
 
+	/* trace_find_next_entry() may change iter->ent */
+	entry = iter->ent;
+
 	if (verbose) {
 		char comm[TASK_COMM_LEN];
 
@@ -1158,12 +1155,12 @@ trace_hwlat_print(struct trace_iterator *iter, int flags,
 
 	trace_assign_type(field, entry);
 
-	trace_seq_printf(s, "#%-5u inner/outer(us): %4llu/%-5llu ts:%lld.%09ld",
+	trace_seq_printf(s, "#%-5u inner/outer(us): %4llu/%-5llu ts:%lld.%09ld count:%d",
 			 field->seqnum,
 			 field->duration,
 			 field->outer_duration,
 			 (long long)field->timestamp.tv_sec,
-			 field->timestamp.tv_nsec);
+			 field->timestamp.tv_nsec, field->count);
 
 	if (field->nmi_count) {
 		/*
diff --git a/kernel/ucount.c b/kernel/ucount.c
index a53cc2b..11b1596 100644
--- a/kernel/ucount.c
+++ b/kernel/ucount.c
@@ -69,6 +69,7 @@ static struct ctl_table user_table[] = {
 	UCOUNT_ENTRY("max_net_namespaces"),
 	UCOUNT_ENTRY("max_mnt_namespaces"),
 	UCOUNT_ENTRY("max_cgroup_namespaces"),
+	UCOUNT_ENTRY("max_time_namespaces"),
 #ifdef CONFIG_INOTIFY_USER
 	UCOUNT_ENTRY("max_inotify_instances"),
 	UCOUNT_ENTRY("max_inotify_watches"),
@@ -81,6 +82,8 @@ bool setup_userns_sysctls(struct user_namespace *ns)
 {
 #ifdef CONFIG_SYSCTL
 	struct ctl_table *tbl;
+
+	BUILD_BUG_ON(ARRAY_SIZE(user_table) != UCOUNT_COUNTS + 1);
 	setup_sysctl_set(&ns->set, &set_root, set_is_seen);
 	tbl = kmemdup(user_table, sizeof(user_table), GFP_KERNEL);
 	if (tbl) {
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 4e01c44..891ccad 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -858,7 +858,8 @@ void wq_worker_running(struct task_struct *task)
  * @task: task going to sleep
  *
  * This function is called from schedule() when a busy worker is
- * going to sleep.
+ * going to sleep. Preemption needs to be disabled to protect ->sleeping
+ * assignment.
  */
 void wq_worker_sleeping(struct task_struct *task)
 {
@@ -875,7 +876,8 @@ void wq_worker_sleeping(struct task_struct *task)
 
 	pool = worker->pool;
 
-	if (WARN_ON_ONCE(worker->sleeping))
+	/* Return if preempted before wq_worker_running() was reached */
+	if (worker->sleeping)
 		return;
 
 	worker->sleeping = 1;
@@ -2834,7 +2836,7 @@ void flush_workqueue(struct workqueue_struct *wq)
 	 * First flushers are responsible for cascading flushes and
 	 * handling overflow.  Non-first flushers can simply return.
 	 */
-	if (wq->first_flusher != &this_flusher)
+	if (READ_ONCE(wq->first_flusher) != &this_flusher)
 		return;
 
 	mutex_lock(&wq->mutex);
@@ -2843,7 +2845,7 @@ void flush_workqueue(struct workqueue_struct *wq)
 	if (wq->first_flusher != &this_flusher)
 		goto out_unlock;
 
-	wq->first_flusher = NULL;
+	WRITE_ONCE(wq->first_flusher, NULL);
 
 	WARN_ON_ONCE(!list_empty(&this_flusher.list));
 	WARN_ON_ONCE(wq->flush_color != this_flusher.flush_color);
@@ -5898,7 +5900,7 @@ static void __init wq_numa_init(void)
  * items.  Actual work item execution starts only after kthreads can be
  * created and scheduled right before early initcalls.
  */
-int __init workqueue_init_early(void)
+void __init workqueue_init_early(void)
 {
 	int std_nice[NR_STD_WORKER_POOLS] = { 0, HIGHPRI_NICE_LEVEL };
 	int hk_flags = HK_FLAG_DOMAIN | HK_FLAG_WQ;
@@ -5965,8 +5967,6 @@ int __init workqueue_init_early(void)
 	       !system_unbound_wq || !system_freezable_wq ||
 	       !system_power_efficient_wq ||
 	       !system_freezable_power_efficient_wq);
-
-	return 0;
 }
 
 /**
@@ -5978,7 +5978,7 @@ int __init workqueue_init_early(void)
  * are no kworkers executing the work items yet.  Populate the worker pools
  * with the initial workers and enable future kworker creations.
  */
-int __init workqueue_init(void)
+void __init workqueue_init(void)
 {
 	struct workqueue_struct *wq;
 	struct worker_pool *pool;
@@ -6025,6 +6025,4 @@ int __init workqueue_init(void)
 
 	wq_online = true;
 	wq_watchdog_init();
-
-	return 0;
 }
diff --git a/lib/.gitignore b/lib/.gitignore
index f2a39c9..327cb2c 100644
--- a/lib/.gitignore
+++ b/lib/.gitignore
@@ -1,6 +1,4 @@
-#
-# Generated files
-#
+# SPDX-License-Identifier: GPL-2.0-only
 gen_crc32table
 gen_crc64table
 crc32table.h
diff --git a/lib/Kconfig b/lib/Kconfig
index bc7e563..5d53f96 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -615,6 +615,9 @@
 config MEMREGION
 	bool
 
+config ARCH_HAS_MEMREMAP_COMPAT_ALIGN
+	bool
+
 # use memcpy to implement user copies for nommu architectures
 config UACCESS_MEMCPY
 	bool
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index a85a6a4..21d9c5f 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -98,7 +98,7 @@
 	bool "Enable dynamic printk() support"
 	default n
 	depends on PRINTK
-	depends on DEBUG_FS
+	depends on (DEBUG_FS || PROC_FS)
 	help
 
 	  Compiles debug level messages into the kernel, which would not
@@ -116,8 +116,9 @@
 	  Usage:
 
 	  Dynamic debugging is controlled via the 'dynamic_debug/control' file,
-	  which is contained in the 'debugfs' filesystem. Thus, the debugfs
-	  filesystem must first be mounted before making use of this feature.
+	  which is contained in the 'debugfs' filesystem or procfs.
+	  Thus, the debugfs or procfs filesystem must first be mounted before
+	  making use of this feature.
 	  We refer the control file as: <debugfs>/dynamic_debug/control. This
 	  file contains a list of the debug statements that can be enabled. The
 	  format for each line of the file is:
@@ -241,6 +242,8 @@
 config DEBUG_INFO_BTF
 	bool "Generate BTF typeinfo"
 	depends on DEBUG_INFO
+	depends on !DEBUG_INFO_SPLIT && !DEBUG_INFO_REDUCED
+	depends on !GCC_PLUGIN_RANDSTRUCT || COMPILE_TEST
 	help
 	  Generate deduplicated BTF type information from DWARF debug info.
 	  Turning this on expects presence of pahole tool, which will convert
@@ -304,18 +307,6 @@
 	  user-space program samples. It is also needed by some features such
 	  as uapi header sanity checks.
 
-config OPTIMIZE_INLINING
-	def_bool y
-	help
-	  This option determines if the kernel forces gcc to inline the functions
-	  developers have marked 'inline'. Doing so takes away freedom from gcc to
-	  do what it thinks is best, which is desirable for the gcc 3.x series of
-	  compilers. The gcc 4.x series have a rewritten inlining algorithm and
-	  enabling this option will generate a smaller kernel there. Hopefully
-	  this algorithm is so good that allowing gcc 4.x and above to make the
-	  decision will become the default in the future. Until then this option
-	  is there to test gcc for this.
-
 config DEBUG_SECTION_MISMATCH
 	bool "Enable full Section mismatch analysis"
 	help
@@ -987,6 +978,18 @@
 	  state.  This can be configured through kernel parameter
 	  "workqueue.watchdog_thresh" and its sysfs counterpart.
 
+config TEST_LOCKUP
+	tristate "Test module to generate lockups"
+	help
+	  This builds the "test_lockup" module that helps to make sure
+	  that watchdogs and lockup detectors are working properly.
+
+	  Depending on module parameters it could emulate soft or hard
+	  lockup, "hung task", or locking arbitrary lock for a long time.
+	  Also it could generate series of lockups with cooling-down periods.
+
+	  If unsure, say N.
+
 endmenu # "Debug lockups and hangs"
 
 menu "Scheduler Debugging"
@@ -1654,7 +1657,7 @@
 	  Provide fault-injection capability for kmalloc.
 
 config FAIL_PAGE_ALLOC
-	bool "Fault-injection capabilitiy for alloc_pages()"
+	bool "Fault-injection capability for alloc_pages()"
 	depends on FAULT_INJECTION
 	help
 	  Provide fault-injection capability for alloc_pages().
diff --git a/lib/Kconfig.ubsan b/lib/Kconfig.ubsan
index 0e04fcb..48469c9 100644
--- a/lib/Kconfig.ubsan
+++ b/lib/Kconfig.ubsan
@@ -2,18 +2,50 @@
 config ARCH_HAS_UBSAN_SANITIZE_ALL
 	bool
 
-config UBSAN
+menuconfig UBSAN
 	bool "Undefined behaviour sanity checker"
 	help
-	  This option enables undefined behaviour sanity checker
+	  This option enables the Undefined Behaviour sanity checker.
 	  Compile-time instrumentation is used to detect various undefined
-	  behaviours in runtime. Various types of checks may be enabled
-	  via boot parameter ubsan_handle
-	  (see: Documentation/dev-tools/ubsan.rst).
+	  behaviours at runtime. For more details, see:
+	  Documentation/dev-tools/ubsan.rst
+
+if UBSAN
+
+config UBSAN_TRAP
+	bool "On Sanitizer warnings, abort the running kernel code"
+	depends on $(cc-option, -fsanitize-undefined-trap-on-error)
+	help
+	  Building kernels with Sanitizer features enabled tends to grow
+	  the kernel size by around 5%, due to adding all the debugging
+	  text on failure paths. To avoid this, Sanitizer instrumentation
+	  can just issue a trap. This reduces the kernel size overhead but
+	  turns all warnings (including potentially harmless conditions)
+	  into full exceptions that abort the running kernel code
+	  (regardless of context, locks held, etc), which may destabilize
+	  the system. For some system builders this is an acceptable
+	  trade-off.
+
+config UBSAN_BOUNDS
+	bool "Perform array index bounds checking"
+	default UBSAN
+	help
+	  This option enables detection of directly indexed out of bounds
+	  array accesses, where the array size is known at compile time.
+	  Note that this does not protect array overflows via bad calls
+	  to the {str,mem}*cpy() family of functions (that is addressed
+	  by CONFIG_FORTIFY_SOURCE).
+
+config UBSAN_MISC
+	bool "Enable all other Undefined Behavior sanity checks"
+	default UBSAN
+	help
+	  This option enables all sanity checks that don't have their
+	  own Kconfig options. Disable this if you only want to have
+	  individually selected checks.
 
 config UBSAN_SANITIZE_ALL
 	bool "Enable instrumentation for the entire kernel"
-	depends on UBSAN
 	depends on ARCH_HAS_UBSAN_SANITIZE_ALL
 
 	# We build with -Wno-maybe-uninitilzed, but we still want to
@@ -30,7 +62,6 @@
 
 config UBSAN_NO_ALIGNMENT
 	bool "Disable checking of pointers alignment"
-	depends on UBSAN
 	default y if HAVE_EFFICIENT_UNALIGNED_ACCESS
 	help
 	  This option disables the check of unaligned memory accesses.
@@ -43,7 +74,9 @@
 
 config TEST_UBSAN
 	tristate "Module for testing for undefined behavior detection"
-	depends on m && UBSAN
+	depends on m
 	help
 	  This is a test module for UBSAN.
 	  It triggers various undefined behavior, and detect it.
+
+endif	# if UBSAN
diff --git a/lib/Makefile b/lib/Makefile
index 09a8acb..685aee6 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -87,9 +87,11 @@
 obj-$(CONFIG_TEST_DEBUG_VIRTUAL) += test_debug_virtual.o
 obj-$(CONFIG_TEST_MEMCAT_P) += test_memcat_p.o
 obj-$(CONFIG_TEST_OBJAGG) += test_objagg.o
+CFLAGS_test_stackinit.o += $(call cc-disable-warning, switch-unreachable)
 obj-$(CONFIG_TEST_STACKINIT) += test_stackinit.o
 obj-$(CONFIG_TEST_BLACKHOLE_DEV) += test_blackhole_dev.o
 obj-$(CONFIG_TEST_MEMINIT) += test_meminit.o
+obj-$(CONFIG_TEST_LOCKUP) += test_lockup.o
 
 obj-$(CONFIG_TEST_LIVEPATCH) += livepatch/
 
@@ -221,6 +223,10 @@
 obj-$(CONFIG_STMP_DEVICE) += stmp_device.o
 obj-$(CONFIG_IRQ_POLL) += irq_poll.o
 
+# stackdepot.c should not be instrumented or call instrumented functions.
+# Prevent the compiler from calling builtins like memcmp() or bcmp() from this
+# file.
+CFLAGS_stackdepot.o += -fno-builtin
 obj-$(CONFIG_STACKDEPOT) += stackdepot.o
 KASAN_SANITIZE_stackdepot.o := n
 KCOV_INSTRUMENT_stackdepot.o := n
@@ -280,7 +286,9 @@
 clean-files	+= oid_registry_data.c
 
 obj-$(CONFIG_UCS2_STRING) += ucs2_string.o
+ifneq ($(CONFIG_UBSAN_TRAP),y)
 obj-$(CONFIG_UBSAN) += ubsan.o
+endif
 
 UBSAN_SANITIZE_ubsan.o := n
 KASAN_SANITIZE_ubsan.o := n
diff --git a/lib/bch.c b/lib/bch.c
index 5db6d3a..052d3fb 100644
--- a/lib/bch.c
+++ b/lib/bch.c
@@ -102,7 +102,7 @@
  */
 struct gf_poly {
 	unsigned int deg;    /* polynomial degree */
-	unsigned int c[0];   /* polynomial terms */
+	unsigned int c[];   /* polynomial terms */
 };
 
 /* given its degree, compute a polynomial size in bytes */
diff --git a/lib/bootconfig.c b/lib/bootconfig.c
index ec3ce7f..912ef49 100644
--- a/lib/bootconfig.c
+++ b/lib/bootconfig.c
@@ -29,12 +29,14 @@ static int xbc_node_num __initdata;
 static char *xbc_data __initdata;
 static size_t xbc_data_size __initdata;
 static struct xbc_node *last_parent __initdata;
+static const char *xbc_err_msg __initdata;
+static int xbc_err_pos __initdata;
 
 static int __init xbc_parse_error(const char *msg, const char *p)
 {
-	int pos = p - xbc_data;
+	xbc_err_msg = msg;
+	xbc_err_pos = (int)(p - xbc_data);
 
-	pr_err("Parse error at pos %d: %s\n", pos, msg);
 	return -EINVAL;
 }
 
@@ -738,33 +740,44 @@ void __init xbc_destroy_all(void)
 /**
  * xbc_init() - Parse given XBC file and build XBC internal tree
  * @buf: boot config text
+ * @emsg: A pointer of const char * to store the error message
+ * @epos: A pointer of int to store the error position
  *
  * This parses the boot config text in @buf. @buf must be a
  * null terminated string and smaller than XBC_DATA_MAX.
  * Return the number of stored nodes (>0) if succeeded, or -errno
  * if there is any error.
+ * In error cases, @emsg will be updated with an error message and
+ * @epos will be updated with the error position which is the byte offset
+ * of @buf. If the error is not a parser error, @epos will be -1.
  */
-int __init xbc_init(char *buf)
+int __init xbc_init(char *buf, const char **emsg, int *epos)
 {
 	char *p, *q;
 	int ret, c;
 
+	if (epos)
+		*epos = -1;
+
 	if (xbc_data) {
-		pr_err("Error: bootconfig is already initialized.\n");
+		if (emsg)
+			*emsg = "Bootconfig is already initialized";
 		return -EBUSY;
 	}
 
 	ret = strlen(buf);
 	if (ret > XBC_DATA_MAX - 1 || ret == 0) {
-		pr_err("Error: Config data is %s.\n",
-			ret ? "too big" : "empty");
+		if (emsg)
+			*emsg = ret ? "Config data is too big" :
+				"Config data is empty";
 		return -ERANGE;
 	}
 
 	xbc_nodes = memblock_alloc(sizeof(struct xbc_node) * XBC_NODE_MAX,
 				   SMP_CACHE_BYTES);
 	if (!xbc_nodes) {
-		pr_err("Failed to allocate memory for bootconfig nodes.\n");
+		if (emsg)
+			*emsg = "Failed to allocate bootconfig nodes";
 		return -ENOMEM;
 	}
 	memset(xbc_nodes, 0, sizeof(struct xbc_node) * XBC_NODE_MAX);
@@ -814,9 +827,13 @@ int __init xbc_init(char *buf)
 	if (!ret)
 		ret = xbc_verify_tree();
 
-	if (ret < 0)
+	if (ret < 0) {
+		if (epos)
+			*epos = xbc_err_pos;
+		if (emsg)
+			*emsg = xbc_err_msg;
 		xbc_destroy_all();
-	else
+	} else
 		ret = xbc_node_num;
 
 	return ret;
diff --git a/lib/dynamic_debug.c b/lib/dynamic_debug.c
index c604091..8f199f4 100644
--- a/lib/dynamic_debug.c
+++ b/lib/dynamic_debug.c
@@ -876,6 +876,14 @@ static const struct file_operations ddebug_proc_fops = {
 	.write = ddebug_proc_write
 };
 
+static const struct proc_ops proc_fops = {
+	.proc_open = ddebug_proc_open,
+	.proc_read = seq_read,
+	.proc_lseek = seq_lseek,
+	.proc_release = seq_release_private,
+	.proc_write = ddebug_proc_write
+};
+
 /*
  * Allocate a new ddebug_table for the given module
  * and add it to the global list.
@@ -991,15 +999,25 @@ static void ddebug_remove_all_tables(void)
 
 static __initdata int ddebug_init_success;
 
-static int __init dynamic_debug_init_debugfs(void)
+static int __init dynamic_debug_init_control(void)
 {
-	struct dentry *dir;
+	struct proc_dir_entry *procfs_dir;
+	struct dentry *debugfs_dir;
 
 	if (!ddebug_init_success)
 		return -ENODEV;
 
-	dir = debugfs_create_dir("dynamic_debug", NULL);
-	debugfs_create_file("control", 0644, dir, NULL, &ddebug_proc_fops);
+	/* Create the control file in debugfs if it is enabled */
+	if (debugfs_initialized()) {
+		debugfs_dir = debugfs_create_dir("dynamic_debug", NULL);
+		debugfs_create_file("control", 0644, debugfs_dir, NULL,
+				    &ddebug_proc_fops);
+	}
+
+	/* Also create the control file in procfs */
+	procfs_dir = proc_mkdir("dynamic_debug", NULL);
+	if (procfs_dir)
+		proc_create("control", 0644, procfs_dir, &proc_fops);
 
 	return 0;
 }
@@ -1013,7 +1031,7 @@ static int __init dynamic_debug_init(void)
 	int n = 0, entries = 0, modct = 0;
 	int verbose_bytes = 0;
 
-	if (__start___verbose == __stop___verbose) {
+	if (&__start___verbose == &__stop___verbose) {
 		pr_warn("_ddebug table is empty in a CONFIG_DYNAMIC_DEBUG build\n");
 		return 1;
 	}
@@ -1077,4 +1095,4 @@ static int __init dynamic_debug_init(void)
 early_initcall(dynamic_debug_init);
 
 /* Debugfs setup must be done later */
-fs_initcall(dynamic_debug_init_debugfs);
+fs_initcall(dynamic_debug_init_control);
diff --git a/lib/percpu-refcount.c b/lib/percpu-refcount.c
index 4f6c6eb..8d09260 100644
--- a/lib/percpu-refcount.c
+++ b/lib/percpu-refcount.c
@@ -50,9 +50,10 @@ static unsigned long __percpu *percpu_count_ptr(struct percpu_ref *ref)
  * @flags: PERCPU_REF_INIT_* flags
  * @gfp: allocation mask to use
  *
- * Initializes @ref.  If @flags is zero, @ref starts in percpu mode with a
- * refcount of 1; analagous to atomic_long_set(ref, 1).  See the
- * definitions of PERCPU_REF_INIT_* flags for flag behaviors.
+ * Initializes @ref.  @ref starts out in percpu mode with a refcount of 1 unless
+ * @flags contains PERCPU_REF_INIT_ATOMIC or PERCPU_REF_INIT_DEAD.  These flags
+ * change the start state to atomic with the latter setting the initial refcount
+ * to 0.  See the definitions of PERCPU_REF_INIT_* flags for flag behaviors.
  *
  * Note that @release must not sleep - it may potentially be called from RCU
  * callback context by percpu_ref_kill().
diff --git a/lib/raid6/.gitignore b/lib/raid6/.gitignore
index 3de0d89..6be5774 100644
--- a/lib/raid6/.gitignore
+++ b/lib/raid6/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 mktables
 altivec*.c
 int*.c
diff --git a/lib/raid6/algos.c b/lib/raid6/algos.c
index bf1b476..6d5e500 100644
--- a/lib/raid6/algos.c
+++ b/lib/raid6/algos.c
@@ -34,10 +34,8 @@ const struct raid6_calls * const raid6_algos[] = {
 	&raid6_avx512x2,
 	&raid6_avx512x1,
 #endif
-#ifdef CONFIG_AS_AVX2
 	&raid6_avx2x2,
 	&raid6_avx2x1,
-#endif
 	&raid6_sse2x2,
 	&raid6_sse2x1,
 	&raid6_sse1x2,
@@ -51,11 +49,9 @@ const struct raid6_calls * const raid6_algos[] = {
 	&raid6_avx512x2,
 	&raid6_avx512x1,
 #endif
-#ifdef CONFIG_AS_AVX2
 	&raid6_avx2x4,
 	&raid6_avx2x2,
 	&raid6_avx2x1,
-#endif
 	&raid6_sse2x4,
 	&raid6_sse2x2,
 	&raid6_sse2x1,
@@ -97,13 +93,11 @@ void (*raid6_datap_recov)(int, size_t, int, void **);
 EXPORT_SYMBOL_GPL(raid6_datap_recov);
 
 const struct raid6_recov_calls *const raid6_recov_algos[] = {
+#ifdef CONFIG_X86
 #ifdef CONFIG_AS_AVX512
 	&raid6_recov_avx512,
 #endif
-#ifdef CONFIG_AS_AVX2
 	&raid6_recov_avx2,
-#endif
-#ifdef CONFIG_AS_SSSE3
 	&raid6_recov_ssse3,
 #endif
 #ifdef CONFIG_S390
diff --git a/lib/raid6/avx2.c b/lib/raid6/avx2.c
index 87184b6..f299476 100644
--- a/lib/raid6/avx2.c
+++ b/lib/raid6/avx2.c
@@ -13,8 +13,6 @@
  *
  */
 
-#ifdef CONFIG_AS_AVX2
-
 #include <linux/raid/pq.h>
 #include "x86.h"
 
@@ -470,5 +468,3 @@ const struct raid6_calls raid6_avx2x4 = {
 	1			/* Has cache hints */
 };
 #endif
-
-#endif /* CONFIG_AS_AVX2 */
diff --git a/lib/raid6/recov_avx2.c b/lib/raid6/recov_avx2.c
index 7a3b5e7..4e80954 100644
--- a/lib/raid6/recov_avx2.c
+++ b/lib/raid6/recov_avx2.c
@@ -4,8 +4,6 @@
  * Author: Jim Kukunas <james.t.kukunas@linux.intel.com>
  */
 
-#ifdef CONFIG_AS_AVX2
-
 #include <linux/raid/pq.h>
 #include "x86.h"
 
@@ -313,7 +311,3 @@ const struct raid6_recov_calls raid6_recov_avx2 = {
 #endif
 	.priority = 2,
 };
-
-#else
-#warning "your version of binutils lacks AVX2 support"
-#endif
diff --git a/lib/raid6/recov_ssse3.c b/lib/raid6/recov_ssse3.c
index 1de97d2..4bfa3c6 100644
--- a/lib/raid6/recov_ssse3.c
+++ b/lib/raid6/recov_ssse3.c
@@ -3,8 +3,6 @@
  * Copyright (C) 2012 Intel Corporation
  */
 
-#ifdef CONFIG_AS_SSSE3
-
 #include <linux/raid/pq.h>
 #include "x86.h"
 
@@ -328,7 +326,3 @@ const struct raid6_recov_calls raid6_recov_ssse3 = {
 #endif
 	.priority = 1,
 };
-
-#else
-#warning "your version of binutils lacks SSSE3 support"
-#endif
diff --git a/lib/raid6/test/Makefile b/lib/raid6/test/Makefile
index 3ab8720..a4c7cd74cff 100644
--- a/lib/raid6/test/Makefile
+++ b/lib/raid6/test/Makefile
@@ -34,14 +34,9 @@
 
 ifeq ($(IS_X86),yes)
         OBJS   += mmx.o sse1.o sse2.o avx2.o recov_ssse3.o recov_avx2.o avx512.o recov_avx512.o
-        CFLAGS += $(shell echo "pshufb %xmm0, %xmm0" |		\
-                    gcc -c -x assembler - >&/dev/null &&	\
-                    rm ./-.o && echo -DCONFIG_AS_SSSE3=1)
-        CFLAGS += $(shell echo "vpbroadcastb %xmm0, %ymm1" |	\
-                    gcc -c -x assembler - >&/dev/null &&	\
-                    rm ./-.o && echo -DCONFIG_AS_AVX2=1)
+        CFLAGS += -DCONFIG_X86
 	CFLAGS += $(shell echo "vpmovm2b %k1, %zmm5" |          \
-		    gcc -c -x assembler - >&/dev/null &&        \
+		    gcc -c -x assembler - >/dev/null 2>&1 &&	\
 		    rm ./-.o && echo -DCONFIG_AS_AVX512=1)
 else ifeq ($(HAS_NEON),yes)
         OBJS   += neon.o neon1.o neon2.o neon4.o neon8.o recov_neon.o recov_neon_inner.o
diff --git a/lib/rbtree.c b/lib/rbtree.c
index abc86c6..8545872 100644
--- a/lib/rbtree.c
+++ b/lib/rbtree.c
@@ -503,7 +503,7 @@ struct rb_node *rb_next(const struct rb_node *node)
 	if (node->rb_right) {
 		node = node->rb_right;
 		while (node->rb_left)
-			node=node->rb_left;
+			node = node->rb_left;
 		return (struct rb_node *)node;
 	}
 
@@ -535,7 +535,7 @@ struct rb_node *rb_prev(const struct rb_node *node)
 	if (node->rb_left) {
 		node = node->rb_left;
 		while (node->rb_right)
-			node=node->rb_right;
+			node = node->rb_right;
 		return (struct rb_node *)node;
 	}
 
diff --git a/lib/scatterlist.c b/lib/scatterlist.c
index 5813072..5d63a88 100644
--- a/lib/scatterlist.c
+++ b/lib/scatterlist.c
@@ -832,7 +832,7 @@ EXPORT_SYMBOL(sg_miter_stop);
  * @buflen:		 The number of bytes to copy
  * @skip:		 Number of bytes to skip before copying
  * @to_buffer:		 transfer direction (true == from an sg list to a
- *			 buffer, false == from a buffer to an sg list
+ *			 buffer, false == from a buffer to an sg list)
  *
  * Returns the number of copied bytes.
  *
diff --git a/lib/stackdepot.c b/lib/stackdepot.c
index 81c69c0..2caffc6 100644
--- a/lib/stackdepot.c
+++ b/lib/stackdepot.c
@@ -20,6 +20,7 @@
  */
 
 #include <linux/gfp.h>
+#include <linux/interrupt.h>
 #include <linux/jhash.h>
 #include <linux/kernel.h>
 #include <linux/mm.h>
@@ -202,9 +203,20 @@ unsigned int stack_depot_fetch(depot_stack_handle_t handle,
 			       unsigned long **entries)
 {
 	union handle_parts parts = { .handle = handle };
-	void *slab = stack_slabs[parts.slabindex];
+	void *slab;
 	size_t offset = parts.offset << STACK_ALLOC_ALIGN;
-	struct stack_record *stack = slab + offset;
+	struct stack_record *stack;
+
+	*entries = NULL;
+	if (parts.slabindex > depot_index) {
+		WARN(1, "slab index %d out of bounds (%d) for stack id %08x\n",
+			parts.slabindex, depot_index, handle);
+		return 0;
+	}
+	slab = stack_slabs[parts.slabindex];
+	if (!slab)
+		return 0;
+	stack = slab + offset;
 
 	*entries = stack->entries;
 	return stack->size;
@@ -305,3 +317,26 @@ depot_stack_handle_t stack_depot_save(unsigned long *entries,
 	return retval;
 }
 EXPORT_SYMBOL_GPL(stack_depot_save);
+
+static inline int in_irqentry_text(unsigned long ptr)
+{
+	return (ptr >= (unsigned long)&__irqentry_text_start &&
+		ptr < (unsigned long)&__irqentry_text_end) ||
+		(ptr >= (unsigned long)&__softirqentry_text_start &&
+		 ptr < (unsigned long)&__softirqentry_text_end);
+}
+
+unsigned int filter_irq_stacks(unsigned long *entries,
+					     unsigned int nr_entries)
+{
+	unsigned int i;
+
+	for (i = 0; i < nr_entries; i++) {
+		if (in_irqentry_text(entries[i])) {
+			/* Include the irqentry function into the stack. */
+			return i + 1;
+		}
+	}
+	return nr_entries;
+}
+EXPORT_SYMBOL_GPL(filter_irq_stacks);
diff --git a/lib/test_bitmap.c b/lib/test_bitmap.c
index 61ed71c..6b13150 100644
--- a/lib/test_bitmap.c
+++ b/lib/test_bitmap.c
@@ -278,6 +278,8 @@ static void __init test_replace(void)
 	unsigned int nlongs = DIV_ROUND_UP(nbits, BITS_PER_LONG);
 	DECLARE_BITMAP(bmap, 1024);
 
+	BUILD_BUG_ON(EXP2_IN_BITS < nbits * 2);
+
 	bitmap_zero(bmap, 1024);
 	bitmap_replace(bmap, &exp2[0 * nlongs], &exp2[1 * nlongs], exp2_to_exp3_mask, nbits);
 	expect_eq_bitmap(bmap, exp3_0_1, nbits);
diff --git a/lib/test_kmod.c b/lib/test_kmod.c
index 9cf7762..e651c37 100644
--- a/lib/test_kmod.c
+++ b/lib/test_kmod.c
@@ -204,7 +204,7 @@ static void test_kmod_put_module(struct kmod_test_device_info *info)
 	case TEST_KMOD_DRIVER:
 		break;
 	case TEST_KMOD_FS_TYPE:
-		if (info && info->fs_sync && info->fs_sync->owner)
+		if (info->fs_sync && info->fs_sync->owner)
 			module_put(info->fs_sync->owner);
 		break;
 	default:
diff --git a/lib/test_lockup.c b/lib/test_lockup.c
new file mode 100644
index 0000000..ea09ca3
--- /dev/null
+++ b/lib/test_lockup.c
@@ -0,0 +1,599 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Test module to generate lockups
+ */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/sched/signal.h>
+#include <linux/sched/clock.h>
+#include <linux/cpu.h>
+#include <linux/nmi.h>
+#include <linux/mm.h>
+#include <linux/uaccess.h>
+#include <linux/file.h>
+
+static unsigned int time_secs;
+module_param(time_secs, uint, 0600);
+MODULE_PARM_DESC(time_secs, "lockup time in seconds, default 0");
+
+static unsigned int time_nsecs;
+module_param(time_nsecs, uint, 0600);
+MODULE_PARM_DESC(time_nsecs, "nanoseconds part of lockup time, default 0");
+
+static unsigned int cooldown_secs;
+module_param(cooldown_secs, uint, 0600);
+MODULE_PARM_DESC(cooldown_secs, "cooldown time between iterations in seconds, default 0");
+
+static unsigned int cooldown_nsecs;
+module_param(cooldown_nsecs, uint, 0600);
+MODULE_PARM_DESC(cooldown_nsecs, "nanoseconds part of cooldown, default 0");
+
+static unsigned int iterations = 1;
+module_param(iterations, uint, 0600);
+MODULE_PARM_DESC(iterations, "lockup iterations, default 1");
+
+static bool all_cpus;
+module_param(all_cpus, bool, 0400);
+MODULE_PARM_DESC(all_cpus, "trigger lockup at all cpus at once");
+
+static int wait_state;
+static char *state = "R";
+module_param(state, charp, 0400);
+MODULE_PARM_DESC(state, "wait in 'R' running (default), 'D' uninterruptible, 'K' killable, 'S' interruptible state");
+
+static bool use_hrtimer;
+module_param(use_hrtimer, bool, 0400);
+MODULE_PARM_DESC(use_hrtimer, "use high-resolution timer for sleeping");
+
+static bool iowait;
+module_param(iowait, bool, 0400);
+MODULE_PARM_DESC(iowait, "account sleep time as iowait");
+
+static bool lock_read;
+module_param(lock_read, bool, 0400);
+MODULE_PARM_DESC(lock_read, "lock read-write locks for read");
+
+static bool lock_single;
+module_param(lock_single, bool, 0400);
+MODULE_PARM_DESC(lock_single, "acquire locks only at one cpu");
+
+static bool reacquire_locks;
+module_param(reacquire_locks, bool, 0400);
+MODULE_PARM_DESC(reacquire_locks, "release and reacquire locks/irq/preempt between iterations");
+
+static bool touch_softlockup;
+module_param(touch_softlockup, bool, 0600);
+MODULE_PARM_DESC(touch_softlockup, "touch soft-lockup watchdog between iterations");
+
+static bool touch_hardlockup;
+module_param(touch_hardlockup, bool, 0600);
+MODULE_PARM_DESC(touch_hardlockup, "touch hard-lockup watchdog between iterations");
+
+static bool call_cond_resched;
+module_param(call_cond_resched, bool, 0600);
+MODULE_PARM_DESC(call_cond_resched, "call cond_resched() between iterations");
+
+static bool measure_lock_wait;
+module_param(measure_lock_wait, bool, 0400);
+MODULE_PARM_DESC(measure_lock_wait, "measure lock wait time");
+
+static unsigned long lock_wait_threshold = ULONG_MAX;
+module_param(lock_wait_threshold, ulong, 0400);
+MODULE_PARM_DESC(lock_wait_threshold, "print lock wait time longer than this in nanoseconds, default off");
+
+static bool test_disable_irq;
+module_param_named(disable_irq, test_disable_irq, bool, 0400);
+MODULE_PARM_DESC(disable_irq, "disable interrupts: generate hard-lockups");
+
+static bool disable_softirq;
+module_param(disable_softirq, bool, 0400);
+MODULE_PARM_DESC(disable_softirq, "disable bottom-half irq handlers");
+
+static bool disable_preempt;
+module_param(disable_preempt, bool, 0400);
+MODULE_PARM_DESC(disable_preempt, "disable preemption: generate soft-lockups");
+
+static bool lock_rcu;
+module_param(lock_rcu, bool, 0400);
+MODULE_PARM_DESC(lock_rcu, "grab rcu_read_lock: generate rcu stalls");
+
+static bool lock_mmap_sem;
+module_param(lock_mmap_sem, bool, 0400);
+MODULE_PARM_DESC(lock_mmap_sem, "lock mm->mmap_sem: block procfs interfaces");
+
+static unsigned long lock_rwsem_ptr;
+module_param_unsafe(lock_rwsem_ptr, ulong, 0400);
+MODULE_PARM_DESC(lock_rwsem_ptr, "lock rw_semaphore at address");
+
+static unsigned long lock_mutex_ptr;
+module_param_unsafe(lock_mutex_ptr, ulong, 0400);
+MODULE_PARM_DESC(lock_mutex_ptr, "lock mutex at address");
+
+static unsigned long lock_spinlock_ptr;
+module_param_unsafe(lock_spinlock_ptr, ulong, 0400);
+MODULE_PARM_DESC(lock_spinlock_ptr, "lock spinlock at address");
+
+static unsigned long lock_rwlock_ptr;
+module_param_unsafe(lock_rwlock_ptr, ulong, 0400);
+MODULE_PARM_DESC(lock_rwlock_ptr, "lock rwlock at address");
+
+static unsigned int alloc_pages_nr;
+module_param_unsafe(alloc_pages_nr, uint, 0600);
+MODULE_PARM_DESC(alloc_pages_nr, "allocate and free pages under locks");
+
+static unsigned int alloc_pages_order;
+module_param(alloc_pages_order, uint, 0400);
+MODULE_PARM_DESC(alloc_pages_order, "page order to allocate");
+
+static gfp_t alloc_pages_gfp = GFP_KERNEL;
+module_param_unsafe(alloc_pages_gfp, uint, 0400);
+MODULE_PARM_DESC(alloc_pages_gfp, "allocate pages with this gfp_mask, default GFP_KERNEL");
+
+static bool alloc_pages_atomic;
+module_param(alloc_pages_atomic, bool, 0400);
+MODULE_PARM_DESC(alloc_pages_atomic, "allocate pages with GFP_ATOMIC");
+
+static bool reallocate_pages;
+module_param(reallocate_pages, bool, 0400);
+MODULE_PARM_DESC(reallocate_pages, "free and allocate pages between iterations");
+
+struct file *test_file;
+struct inode *test_inode;
+static char test_file_path[256];
+module_param_string(file_path, test_file_path, sizeof(test_file_path), 0400);
+MODULE_PARM_DESC(file_path, "file path to test");
+
+static bool test_lock_inode;
+module_param_named(lock_inode, test_lock_inode, bool, 0400);
+MODULE_PARM_DESC(lock_inode, "lock file -> inode -> i_rwsem");
+
+static bool test_lock_mapping;
+module_param_named(lock_mapping, test_lock_mapping, bool, 0400);
+MODULE_PARM_DESC(lock_mapping, "lock file -> mapping -> i_mmap_rwsem");
+
+static bool test_lock_sb_umount;
+module_param_named(lock_sb_umount, test_lock_sb_umount, bool, 0400);
+MODULE_PARM_DESC(lock_sb_umount, "lock file -> sb -> s_umount");
+
+static atomic_t alloc_pages_failed = ATOMIC_INIT(0);
+
+static atomic64_t max_lock_wait = ATOMIC64_INIT(0);
+
+static struct task_struct *main_task;
+static int master_cpu;
+
+static void test_lock(bool master, bool verbose)
+{
+	u64 uninitialized_var(wait_start);
+
+	if (measure_lock_wait)
+		wait_start = local_clock();
+
+	if (lock_mutex_ptr && master) {
+		if (verbose)
+			pr_notice("lock mutex %ps\n", (void *)lock_mutex_ptr);
+		mutex_lock((struct mutex *)lock_mutex_ptr);
+	}
+
+	if (lock_rwsem_ptr && master) {
+		if (verbose)
+			pr_notice("lock rw_semaphore %ps\n",
+				  (void *)lock_rwsem_ptr);
+		if (lock_read)
+			down_read((struct rw_semaphore *)lock_rwsem_ptr);
+		else
+			down_write((struct rw_semaphore *)lock_rwsem_ptr);
+	}
+
+	if (lock_mmap_sem && master) {
+		if (verbose)
+			pr_notice("lock mmap_sem pid=%d\n", main_task->pid);
+		if (lock_read)
+			down_read(&main_task->mm->mmap_sem);
+		else
+			down_write(&main_task->mm->mmap_sem);
+	}
+
+	if (test_disable_irq)
+		local_irq_disable();
+
+	if (disable_softirq)
+		local_bh_disable();
+
+	if (disable_preempt)
+		preempt_disable();
+
+	if (lock_rcu)
+		rcu_read_lock();
+
+	if (lock_spinlock_ptr && master) {
+		if (verbose)
+			pr_notice("lock spinlock %ps\n",
+				  (void *)lock_spinlock_ptr);
+		spin_lock((spinlock_t *)lock_spinlock_ptr);
+	}
+
+	if (lock_rwlock_ptr && master) {
+		if (verbose)
+			pr_notice("lock rwlock %ps\n",
+				  (void *)lock_rwlock_ptr);
+		if (lock_read)
+			read_lock((rwlock_t *)lock_rwlock_ptr);
+		else
+			write_lock((rwlock_t *)lock_rwlock_ptr);
+	}
+
+	if (measure_lock_wait) {
+		s64 cur_wait = local_clock() - wait_start;
+		s64 max_wait = atomic64_read(&max_lock_wait);
+
+		do {
+			if (cur_wait < max_wait)
+				break;
+			max_wait = atomic64_cmpxchg(&max_lock_wait,
+						    max_wait, cur_wait);
+		} while (max_wait != cur_wait);
+
+		if (cur_wait > lock_wait_threshold)
+			pr_notice_ratelimited("lock wait %lld ns\n", cur_wait);
+	}
+}
+
+static void test_unlock(bool master, bool verbose)
+{
+	if (lock_rwlock_ptr && master) {
+		if (lock_read)
+			read_unlock((rwlock_t *)lock_rwlock_ptr);
+		else
+			write_unlock((rwlock_t *)lock_rwlock_ptr);
+		if (verbose)
+			pr_notice("unlock rwlock %ps\n",
+				  (void *)lock_rwlock_ptr);
+	}
+
+	if (lock_spinlock_ptr && master) {
+		spin_unlock((spinlock_t *)lock_spinlock_ptr);
+		if (verbose)
+			pr_notice("unlock spinlock %ps\n",
+				  (void *)lock_spinlock_ptr);
+	}
+
+	if (lock_rcu)
+		rcu_read_unlock();
+
+	if (disable_preempt)
+		preempt_enable();
+
+	if (disable_softirq)
+		local_bh_enable();
+
+	if (test_disable_irq)
+		local_irq_enable();
+
+	if (lock_mmap_sem && master) {
+		if (lock_read)
+			up_read(&main_task->mm->mmap_sem);
+		else
+			up_write(&main_task->mm->mmap_sem);
+		if (verbose)
+			pr_notice("unlock mmap_sem pid=%d\n", main_task->pid);
+	}
+
+	if (lock_rwsem_ptr && master) {
+		if (lock_read)
+			up_read((struct rw_semaphore *)lock_rwsem_ptr);
+		else
+			up_write((struct rw_semaphore *)lock_rwsem_ptr);
+		if (verbose)
+			pr_notice("unlock rw_semaphore %ps\n",
+				  (void *)lock_rwsem_ptr);
+	}
+
+	if (lock_mutex_ptr && master) {
+		mutex_unlock((struct mutex *)lock_mutex_ptr);
+		if (verbose)
+			pr_notice("unlock mutex %ps\n",
+				  (void *)lock_mutex_ptr);
+	}
+}
+
+static void test_alloc_pages(struct list_head *pages)
+{
+	struct page *page;
+	unsigned int i;
+
+	for (i = 0; i < alloc_pages_nr; i++) {
+		page = alloc_pages(alloc_pages_gfp, alloc_pages_order);
+		if (!page) {
+			atomic_inc(&alloc_pages_failed);
+			break;
+		}
+		list_add(&page->lru, pages);
+	}
+}
+
+static void test_free_pages(struct list_head *pages)
+{
+	struct page *page, *next;
+
+	list_for_each_entry_safe(page, next, pages, lru)
+		__free_pages(page, alloc_pages_order);
+	INIT_LIST_HEAD(pages);
+}
+
+static void test_wait(unsigned int secs, unsigned int nsecs)
+{
+	if (wait_state == TASK_RUNNING) {
+		if (secs)
+			mdelay(secs * MSEC_PER_SEC);
+		if (nsecs)
+			ndelay(nsecs);
+		return;
+	}
+
+	__set_current_state(wait_state);
+	if (use_hrtimer) {
+		ktime_t time;
+
+		time = ns_to_ktime((u64)secs * NSEC_PER_SEC + nsecs);
+		schedule_hrtimeout(&time, HRTIMER_MODE_REL);
+	} else {
+		schedule_timeout(secs * HZ + nsecs_to_jiffies(nsecs));
+	}
+}
+
+static void test_lockup(bool master)
+{
+	u64 lockup_start = local_clock();
+	unsigned int iter = 0;
+	LIST_HEAD(pages);
+
+	pr_notice("Start on CPU%d\n", raw_smp_processor_id());
+
+	test_lock(master, true);
+
+	test_alloc_pages(&pages);
+
+	while (iter++ < iterations && !signal_pending(main_task)) {
+
+		if (iowait)
+			current->in_iowait = 1;
+
+		test_wait(time_secs, time_nsecs);
+
+		if (iowait)
+			current->in_iowait = 0;
+
+		if (reallocate_pages)
+			test_free_pages(&pages);
+
+		if (reacquire_locks)
+			test_unlock(master, false);
+
+		if (touch_softlockup)
+			touch_softlockup_watchdog();
+
+		if (touch_hardlockup)
+			touch_nmi_watchdog();
+
+		if (call_cond_resched)
+			cond_resched();
+
+		test_wait(cooldown_secs, cooldown_nsecs);
+
+		if (reacquire_locks)
+			test_lock(master, false);
+
+		if (reallocate_pages)
+			test_alloc_pages(&pages);
+	}
+
+	pr_notice("Finish on CPU%d in %lld ns\n", raw_smp_processor_id(),
+		  local_clock() - lockup_start);
+
+	test_free_pages(&pages);
+
+	test_unlock(master, true);
+}
+
+DEFINE_PER_CPU(struct work_struct, test_works);
+
+static void test_work_fn(struct work_struct *work)
+{
+	test_lockup(!lock_single ||
+		    work == per_cpu_ptr(&test_works, master_cpu));
+}
+
+static bool test_kernel_ptr(unsigned long addr, int size)
+{
+	void *ptr = (void *)addr;
+	char buf;
+
+	if (!addr)
+		return false;
+
+	/* should be at least readable kernel address */
+	if (access_ok(ptr, 1) ||
+	    access_ok(ptr + size - 1, 1) ||
+	    probe_kernel_address(ptr, buf) ||
+	    probe_kernel_address(ptr + size - 1, buf)) {
+		pr_err("invalid kernel ptr: %#lx\n", addr);
+		return true;
+	}
+
+	return false;
+}
+
+static bool __maybe_unused test_magic(unsigned long addr, int offset,
+				      unsigned int expected)
+{
+	void *ptr = (void *)addr + offset;
+	unsigned int magic = 0;
+
+	if (!addr)
+		return false;
+
+	if (probe_kernel_address(ptr, magic) || magic != expected) {
+		pr_err("invalid magic at %#lx + %#x = %#x, expected %#x\n",
+		       addr, offset, magic, expected);
+		return true;
+	}
+
+	return false;
+}
+
+static int __init test_lockup_init(void)
+{
+	u64 test_start = local_clock();
+
+	main_task = current;
+
+	switch (state[0]) {
+	case 'S':
+		wait_state = TASK_INTERRUPTIBLE;
+		break;
+	case 'D':
+		wait_state = TASK_UNINTERRUPTIBLE;
+		break;
+	case 'K':
+		wait_state = TASK_KILLABLE;
+		break;
+	case 'R':
+		wait_state = TASK_RUNNING;
+		break;
+	default:
+		pr_err("unknown state=%s\n", state);
+		return -EINVAL;
+	}
+
+	if (alloc_pages_atomic)
+		alloc_pages_gfp = GFP_ATOMIC;
+
+	if (test_kernel_ptr(lock_spinlock_ptr, sizeof(spinlock_t)) ||
+	    test_kernel_ptr(lock_rwlock_ptr, sizeof(rwlock_t)) ||
+	    test_kernel_ptr(lock_mutex_ptr, sizeof(struct mutex)) ||
+	    test_kernel_ptr(lock_rwsem_ptr, sizeof(struct rw_semaphore)))
+		return -EINVAL;
+
+#ifdef CONFIG_DEBUG_SPINLOCK
+	if (test_magic(lock_spinlock_ptr,
+		       offsetof(spinlock_t, rlock.magic),
+		       SPINLOCK_MAGIC) ||
+	    test_magic(lock_rwlock_ptr,
+		       offsetof(rwlock_t, magic),
+		       RWLOCK_MAGIC) ||
+	    test_magic(lock_mutex_ptr,
+		       offsetof(struct mutex, wait_lock.rlock.magic),
+		       SPINLOCK_MAGIC) ||
+	    test_magic(lock_rwsem_ptr,
+		       offsetof(struct rw_semaphore, wait_lock.magic),
+		       SPINLOCK_MAGIC))
+		return -EINVAL;
+#endif
+
+	if ((wait_state != TASK_RUNNING ||
+	     (call_cond_resched && !reacquire_locks) ||
+	     (alloc_pages_nr && gfpflags_allow_blocking(alloc_pages_gfp))) &&
+	    (test_disable_irq || disable_softirq || disable_preempt ||
+	     lock_rcu || lock_spinlock_ptr || lock_rwlock_ptr)) {
+		pr_err("refuse to sleep in atomic context\n");
+		return -EINVAL;
+	}
+
+	if (lock_mmap_sem && !main_task->mm) {
+		pr_err("no mm to lock mmap_sem\n");
+		return -EINVAL;
+	}
+
+	if (test_file_path[0]) {
+		test_file = filp_open(test_file_path, O_RDONLY, 0);
+		if (IS_ERR(test_file)) {
+			pr_err("cannot find file_path\n");
+			return -EINVAL;
+		}
+		test_inode = file_inode(test_file);
+	} else if (test_lock_inode ||
+		   test_lock_mapping ||
+		   test_lock_sb_umount) {
+		pr_err("no file to lock\n");
+		return -EINVAL;
+	}
+
+	if (test_lock_inode && test_inode)
+		lock_rwsem_ptr = (unsigned long)&test_inode->i_rwsem;
+
+	if (test_lock_mapping && test_file && test_file->f_mapping)
+		lock_rwsem_ptr = (unsigned long)&test_file->f_mapping->i_mmap_rwsem;
+
+	if (test_lock_sb_umount && test_inode)
+		lock_rwsem_ptr = (unsigned long)&test_inode->i_sb->s_umount;
+
+	pr_notice("START pid=%d time=%u +%u ns cooldown=%u +%u ns iterations=%u state=%s %s%s%s%s%s%s%s%s%s%s%s\n",
+		  main_task->pid, time_secs, time_nsecs,
+		  cooldown_secs, cooldown_nsecs, iterations, state,
+		  all_cpus ? "all_cpus " : "",
+		  iowait ? "iowait " : "",
+		  test_disable_irq ? "disable_irq " : "",
+		  disable_softirq ? "disable_softirq " : "",
+		  disable_preempt ? "disable_preempt " : "",
+		  lock_rcu ? "lock_rcu " : "",
+		  lock_read ? "lock_read " : "",
+		  touch_softlockup ? "touch_softlockup " : "",
+		  touch_hardlockup ? "touch_hardlockup " : "",
+		  call_cond_resched ? "call_cond_resched " : "",
+		  reacquire_locks ? "reacquire_locks " : "");
+
+	if (alloc_pages_nr)
+		pr_notice("ALLOCATE PAGES nr=%u order=%u gfp=%pGg %s\n",
+			  alloc_pages_nr, alloc_pages_order, &alloc_pages_gfp,
+			  reallocate_pages ? "reallocate_pages " : "");
+
+	if (all_cpus) {
+		unsigned int cpu;
+
+		cpus_read_lock();
+
+		preempt_disable();
+		master_cpu = smp_processor_id();
+		for_each_online_cpu(cpu) {
+			INIT_WORK(per_cpu_ptr(&test_works, cpu), test_work_fn);
+			queue_work_on(cpu, system_highpri_wq,
+				      per_cpu_ptr(&test_works, cpu));
+		}
+		preempt_enable();
+
+		for_each_online_cpu(cpu)
+			flush_work(per_cpu_ptr(&test_works, cpu));
+
+		cpus_read_unlock();
+	} else {
+		test_lockup(true);
+	}
+
+	if (measure_lock_wait)
+		pr_notice("Maximum lock wait: %lld ns\n",
+			  atomic64_read(&max_lock_wait));
+
+	if (alloc_pages_nr)
+		pr_notice("Page allocation failed %u times\n",
+			  atomic_read(&alloc_pages_failed));
+
+	pr_notice("FINISH in %llu ns\n", local_clock() - test_start);
+
+	if (test_file)
+		fput(test_file);
+
+	if (signal_pending(main_task))
+		return -EINTR;
+
+	return -EAGAIN;
+}
+module_init(test_lockup_init);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Konstantin Khlebnikov <khlebnikov@yandex-team.ru>");
+MODULE_DESCRIPTION("Test module to generate lockups");
diff --git a/lib/test_stackinit.c b/lib/test_stackinit.c
index 2d7d257..f93b1e1 100644
--- a/lib/test_stackinit.c
+++ b/lib/test_stackinit.c
@@ -92,8 +92,9 @@ static bool range_contains(char *haystack_start, size_t haystack_size,
  * @var_type: type to be tested for zeroing initialization
  * @which: is this a SCALAR, STRING, or STRUCT type?
  * @init_level: what kind of initialization is performed
+ * @xfail: is this test expected to fail?
  */
-#define DEFINE_TEST_DRIVER(name, var_type, which)		\
+#define DEFINE_TEST_DRIVER(name, var_type, which, xfail)	\
 /* Returns 0 on success, 1 on failure. */			\
 static noinline __init int test_ ## name (void)			\
 {								\
@@ -139,13 +140,14 @@ static noinline __init int test_ ## name (void)			\
 	for (sum = 0, i = 0; i < target_size; i++)		\
 		sum += (check_buf[i] == 0xFF);			\
 								\
-	if (sum == 0)						\
+	if (sum == 0) {						\
 		pr_info(#name " ok\n");				\
-	else							\
-		pr_warn(#name " FAIL (uninit bytes: %d)\n",	\
-			sum);					\
-								\
-	return (sum != 0);					\
+		return 0;					\
+	} else {						\
+		pr_warn(#name " %sFAIL (uninit bytes: %d)\n",	\
+			(xfail) ? "X" : "", sum);		\
+		return (xfail) ? 0 : 1;				\
+	}							\
 }
 #define DEFINE_TEST(name, var_type, which, init_level)		\
 /* no-op to force compiler into ignoring "uninitialized" vars */\
@@ -189,7 +191,7 @@ static noinline __init int leaf_ ## name(unsigned long sp,	\
 								\
 	return (int)buf[0] | (int)buf[sizeof(buf) - 1];		\
 }								\
-DEFINE_TEST_DRIVER(name, var_type, which)
+DEFINE_TEST_DRIVER(name, var_type, which, 0)
 
 /* Structure with no padding. */
 struct test_packed {
@@ -326,8 +328,14 @@ static noinline __init int leaf_switch_2_none(unsigned long sp, bool fill,
 	return __leaf_switch_none(2, fill);
 }
 
-DEFINE_TEST_DRIVER(switch_1_none, uint64_t, SCALAR);
-DEFINE_TEST_DRIVER(switch_2_none, uint64_t, SCALAR);
+/*
+ * These are expected to fail for most configurations because neither
+ * GCC nor Clang have a way to perform initialization of variables in
+ * non-code areas (i.e. in a switch statement before the first "case").
+ * https://bugs.llvm.org/show_bug.cgi?id=44916
+ */
+DEFINE_TEST_DRIVER(switch_1_none, uint64_t, SCALAR, 1);
+DEFINE_TEST_DRIVER(switch_2_none, uint64_t, SCALAR, 1);
 
 static int __init test_stackinit_init(void)
 {
diff --git a/lib/ts_bm.c b/lib/ts_bm.c
index b352903..277cb44 100644
--- a/lib/ts_bm.c
+++ b/lib/ts_bm.c
@@ -52,7 +52,7 @@ struct ts_bm
 	u8 *		pattern;
 	unsigned int	patlen;
 	unsigned int 	bad_shift[ASIZE];
-	unsigned int	good_shift[0];
+	unsigned int	good_shift[];
 };
 
 static unsigned int bm_find(struct ts_config *conf, struct ts_state *state)
diff --git a/lib/ts_fsm.c b/lib/ts_fsm.c
index 9c873ca..ab749ec 100644
--- a/lib/ts_fsm.c
+++ b/lib/ts_fsm.c
@@ -32,7 +32,7 @@
 struct ts_fsm
 {
 	unsigned int		ntokens;
-	struct ts_fsm_token	tokens[0];
+	struct ts_fsm_token	tokens[];
 };
 
 /* other values derived from ctype.h */
diff --git a/lib/ts_kmp.c b/lib/ts_kmp.c
index 94617e0..c77a3d5 100644
--- a/lib/ts_kmp.c
+++ b/lib/ts_kmp.c
@@ -36,7 +36,7 @@ struct ts_kmp
 {
 	u8 *		pattern;
 	unsigned int	pattern_len;
-	unsigned int 	prefix_tbl[0];
+	unsigned int	prefix_tbl[];
 };
 
 static unsigned int kmp_find(struct ts_config *conf, struct ts_state *state)
diff --git a/lib/ubsan.c b/lib/ubsan.c
index 7b9b58a..f8c0ccf 100644
--- a/lib/ubsan.c
+++ b/lib/ubsan.c
@@ -45,13 +45,6 @@ static bool was_reported(struct source_location *location)
 	return test_and_set_bit(REPORTED_BIT, &location->reported);
 }
 
-static void print_source_location(const char *prefix,
-				struct source_location *loc)
-{
-	pr_err("%s %s:%d:%d\n", prefix, loc->file_name,
-		loc->line & LINE_MASK, loc->column & COLUMN_MASK);
-}
-
 static bool suppress_report(struct source_location *loc)
 {
 	return current->in_ubsan || was_reported(loc);
@@ -140,13 +133,14 @@ static void val_to_string(char *str, size_t size, struct type_descriptor *type,
 	}
 }
 
-static void ubsan_prologue(struct source_location *location)
+static void ubsan_prologue(struct source_location *loc, const char *reason)
 {
 	current->in_ubsan++;
 
 	pr_err("========================================"
 		"========================================\n");
-	print_source_location("UBSAN: Undefined behaviour in", location);
+	pr_err("UBSAN: %s in %s:%d:%d\n", reason, loc->file_name,
+		loc->line & LINE_MASK, loc->column & COLUMN_MASK);
 }
 
 static void ubsan_epilogue(void)
@@ -156,6 +150,17 @@ static void ubsan_epilogue(void)
 		"========================================\n");
 
 	current->in_ubsan--;
+
+	if (panic_on_warn) {
+		/*
+		 * This thread may hit another WARN() in the panic path.
+		 * Resetting this prevents additional WARN() from panicking the
+		 * system on this thread.  Other threads are blocked by the
+		 * panic_mutex in panic().
+		 */
+		panic_on_warn = 0;
+		panic("panic_on_warn set ...\n");
+	}
 }
 
 static void handle_overflow(struct overflow_data *data, void *lhs,
@@ -169,12 +174,12 @@ static void handle_overflow(struct overflow_data *data, void *lhs,
 	if (suppress_report(&data->location))
 		return;
 
-	ubsan_prologue(&data->location);
+	ubsan_prologue(&data->location, type_is_signed(type) ?
+			"signed-integer-overflow" :
+			"unsigned-integer-overflow");
 
 	val_to_string(lhs_val_str, sizeof(lhs_val_str), type, lhs);
 	val_to_string(rhs_val_str, sizeof(rhs_val_str), type, rhs);
-	pr_err("%s integer overflow:\n",
-		type_is_signed(type) ? "signed" : "unsigned");
 	pr_err("%s %c %s cannot be represented in type %s\n",
 		lhs_val_str,
 		op,
@@ -214,7 +219,7 @@ void __ubsan_handle_negate_overflow(struct overflow_data *data,
 	if (suppress_report(&data->location))
 		return;
 
-	ubsan_prologue(&data->location);
+	ubsan_prologue(&data->location, "negation-overflow");
 
 	val_to_string(old_val_str, sizeof(old_val_str), data->type, old_val);
 
@@ -234,7 +239,7 @@ void __ubsan_handle_divrem_overflow(struct overflow_data *data,
 	if (suppress_report(&data->location))
 		return;
 
-	ubsan_prologue(&data->location);
+	ubsan_prologue(&data->location, "division-overflow");
 
 	val_to_string(rhs_val_str, sizeof(rhs_val_str), data->type, rhs);
 
@@ -253,7 +258,7 @@ static void handle_null_ptr_deref(struct type_mismatch_data_common *data)
 	if (suppress_report(data->location))
 		return;
 
-	ubsan_prologue(data->location);
+	ubsan_prologue(data->location, "null-ptr-deref");
 
 	pr_err("%s null pointer of type %s\n",
 		type_check_kinds[data->type_check_kind],
@@ -268,7 +273,7 @@ static void handle_misaligned_access(struct type_mismatch_data_common *data,
 	if (suppress_report(data->location))
 		return;
 
-	ubsan_prologue(data->location);
+	ubsan_prologue(data->location, "misaligned-access");
 
 	pr_err("%s misaligned address %p for type %s\n",
 		type_check_kinds[data->type_check_kind],
@@ -284,7 +289,7 @@ static void handle_object_size_mismatch(struct type_mismatch_data_common *data,
 	if (suppress_report(data->location))
 		return;
 
-	ubsan_prologue(data->location);
+	ubsan_prologue(data->location, "object-size-mismatch");
 	pr_err("%s address %p with insufficient space\n",
 		type_check_kinds[data->type_check_kind],
 		(void *) ptr);
@@ -343,7 +348,7 @@ void __ubsan_handle_out_of_bounds(struct out_of_bounds_data *data, void *index)
 	if (suppress_report(&data->location))
 		return;
 
-	ubsan_prologue(&data->location);
+	ubsan_prologue(&data->location, "array-index-out-of-bounds");
 
 	val_to_string(index_str, sizeof(index_str), data->index_type, index);
 	pr_err("index %s is out of range for type %s\n", index_str,
@@ -364,7 +369,7 @@ void __ubsan_handle_shift_out_of_bounds(struct shift_out_of_bounds_data *data,
 	if (suppress_report(&data->location))
 		goto out;
 
-	ubsan_prologue(&data->location);
+	ubsan_prologue(&data->location, "shift-out-of-bounds");
 
 	val_to_string(rhs_str, sizeof(rhs_str), rhs_type, rhs);
 	val_to_string(lhs_str, sizeof(lhs_str), lhs_type, lhs);
@@ -396,7 +401,7 @@ EXPORT_SYMBOL(__ubsan_handle_shift_out_of_bounds);
 
 void __ubsan_handle_builtin_unreachable(struct unreachable_data *data)
 {
-	ubsan_prologue(&data->location);
+	ubsan_prologue(&data->location, "unreachable");
 	pr_err("calling __builtin_unreachable()\n");
 	ubsan_epilogue();
 	panic("can't return from __builtin_unreachable()");
@@ -411,7 +416,7 @@ void __ubsan_handle_load_invalid_value(struct invalid_value_data *data,
 	if (suppress_report(&data->location))
 		return;
 
-	ubsan_prologue(&data->location);
+	ubsan_prologue(&data->location, "invalid-load");
 
 	val_to_string(val_str, sizeof(val_str), data->type, val);
 
diff --git a/mm/Kconfig b/mm/Kconfig
index ab80933..c1acc34 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -139,6 +139,10 @@
 config ARCH_KEEP_MEMBLOCK
 	bool
 
+# Keep arch NUMA mapping infrastructure post-init.
+config NUMA_KEEP_MEMINFO
+	bool
+
 config MEMORY_ISOLATION
 	bool
 
@@ -154,6 +158,7 @@
 	bool "Allow for memory hot-add"
 	depends on SPARSEMEM || X86_64_ACPI_NUMA
 	depends on ARCH_ENABLE_MEMORY_HOTPLUG
+	select NUMA_KEEP_MEMINFO if NUMA
 
 config MEMORY_HOTPLUG_SPARSE
 	def_bool y
@@ -237,6 +242,17 @@
 	  linux-mm@kvack.org.
 
 #
+# support for free page reporting
+config PAGE_REPORTING
+	bool "Free page reporting"
+	def_bool n
+	help
+	  Free page reporting allows for the incremental acquisition of
+	  free pages from the buddy allocator for the purpose of reporting
+	  those pages to another entity, such as a hypervisor, so that the
+	  memory can be freed within the host for other uses.
+
+#
 # support for page migration
 #
 config MIGRATION
@@ -420,10 +436,6 @@
 
 	  For selection by architectures with reasonable THP sizes.
 
-config	TRANSPARENT_HUGE_PAGECACHE
-	def_bool y
-	depends on TRANSPARENT_HUGEPAGE
-
 #
 # UP and nommu archs use km based percpu allocator
 #
@@ -526,7 +538,6 @@
 config ZSWAP
 	bool "Compressed cache for swap pages (EXPERIMENTAL)"
 	depends on FRONTSWAP && CRYPTO=y
-	select CRYPTO_LZO
 	select ZPOOL
 	help
 	  A lightweight compressed cache for swap pages.  It takes
@@ -542,6 +553,123 @@
 	  they have not be fully explored on the large set of potential
 	  configurations and workloads that exist.
 
+choice
+	prompt "Compressed cache for swap pages default compressor"
+	depends on ZSWAP
+	default ZSWAP_COMPRESSOR_DEFAULT_LZO
+	help
+	  Selects the default compression algorithm for the compressed cache
+	  for swap pages.
+
+	  For an overview what kind of performance can be expected from
+	  a particular compression algorithm please refer to the benchmarks
+	  available at the following LWN page:
+	  https://lwn.net/Articles/751795/
+
+	  If in doubt, select 'LZO'.
+
+	  The selection made here can be overridden by using the kernel
+	  command line 'zswap.compressor=' option.
+
+config ZSWAP_COMPRESSOR_DEFAULT_DEFLATE
+	bool "Deflate"
+	select CRYPTO_DEFLATE
+	help
+	  Use the Deflate algorithm as the default compression algorithm.
+
+config ZSWAP_COMPRESSOR_DEFAULT_LZO
+	bool "LZO"
+	select CRYPTO_LZO
+	help
+	  Use the LZO algorithm as the default compression algorithm.
+
+config ZSWAP_COMPRESSOR_DEFAULT_842
+	bool "842"
+	select CRYPTO_842
+	help
+	  Use the 842 algorithm as the default compression algorithm.
+
+config ZSWAP_COMPRESSOR_DEFAULT_LZ4
+	bool "LZ4"
+	select CRYPTO_LZ4
+	help
+	  Use the LZ4 algorithm as the default compression algorithm.
+
+config ZSWAP_COMPRESSOR_DEFAULT_LZ4HC
+	bool "LZ4HC"
+	select CRYPTO_LZ4HC
+	help
+	  Use the LZ4HC algorithm as the default compression algorithm.
+
+config ZSWAP_COMPRESSOR_DEFAULT_ZSTD
+	bool "zstd"
+	select CRYPTO_ZSTD
+	help
+	  Use the zstd algorithm as the default compression algorithm.
+endchoice
+
+config ZSWAP_COMPRESSOR_DEFAULT
+       string
+       depends on ZSWAP
+       default "deflate" if ZSWAP_COMPRESSOR_DEFAULT_DEFLATE
+       default "lzo" if ZSWAP_COMPRESSOR_DEFAULT_LZO
+       default "842" if ZSWAP_COMPRESSOR_DEFAULT_842
+       default "lz4" if ZSWAP_COMPRESSOR_DEFAULT_LZ4
+       default "lz4hc" if ZSWAP_COMPRESSOR_DEFAULT_LZ4HC
+       default "zstd" if ZSWAP_COMPRESSOR_DEFAULT_ZSTD
+       default ""
+
+choice
+	prompt "Compressed cache for swap pages default allocator"
+	depends on ZSWAP
+	default ZSWAP_ZPOOL_DEFAULT_ZBUD
+	help
+	  Selects the default allocator for the compressed cache for
+	  swap pages.
+	  The default is 'zbud' for compatibility, however please do
+	  read the description of each of the allocators below before
+	  making a right choice.
+
+	  The selection made here can be overridden by using the kernel
+	  command line 'zswap.zpool=' option.
+
+config ZSWAP_ZPOOL_DEFAULT_ZBUD
+	bool "zbud"
+	select ZBUD
+	help
+	  Use the zbud allocator as the default allocator.
+
+config ZSWAP_ZPOOL_DEFAULT_Z3FOLD
+	bool "z3fold"
+	select Z3FOLD
+	help
+	  Use the z3fold allocator as the default allocator.
+
+config ZSWAP_ZPOOL_DEFAULT_ZSMALLOC
+	bool "zsmalloc"
+	select ZSMALLOC
+	help
+	  Use the zsmalloc allocator as the default allocator.
+endchoice
+
+config ZSWAP_ZPOOL_DEFAULT
+       string
+       depends on ZSWAP
+       default "zbud" if ZSWAP_ZPOOL_DEFAULT_ZBUD
+       default "z3fold" if ZSWAP_ZPOOL_DEFAULT_Z3FOLD
+       default "zsmalloc" if ZSWAP_ZPOOL_DEFAULT_ZSMALLOC
+       default ""
+
+config ZSWAP_DEFAULT_ON
+	bool "Enable the compressed cache for swap pages by default"
+	depends on ZSWAP
+	help
+	  If selected, the compressed cache for swap pages will be enabled
+	  at boot, otherwise it will be disabled.
+
+	  The selection made here can be overridden by using the kernel
+	  command line 'zswap.enabled=' option.
+
 config ZPOOL
 	tristate "Common API for compressed memory storage"
 	help
@@ -714,7 +842,7 @@
 
 config READ_ONLY_THP_FOR_FS
 	bool "Read-only THP for filesystems (EXPERIMENTAL)"
-	depends on TRANSPARENT_HUGE_PAGECACHE && SHMEM
+	depends on TRANSPARENT_HUGEPAGE && SHMEM
 
 	help
 	  Allow khugepaged to put read-only file-backed pages in THP.
diff --git a/mm/Makefile b/mm/Makefile
index dbc8346..fccd375 100644
--- a/mm/Makefile
+++ b/mm/Makefile
@@ -111,3 +111,4 @@
 obj-$(CONFIG_MEMFD_CREATE) += memfd.o
 obj-$(CONFIG_MAPPING_DIRTY_HELPERS) += mapping_dirty_helpers.o
 obj-$(CONFIG_PTDUMP_CORE) += ptdump.o
+obj-$(CONFIG_PAGE_REPORTING) += page_reporting.o
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index 62f05f6..c81b4f3 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -491,8 +491,8 @@ static void cgwb_release_workfn(struct work_struct *work)
 	css_put(wb->blkcg_css);
 	mutex_unlock(&wb->bdi->cgwb_release_mutex);
 
-	/* triggers blkg destruction if cgwb_refcnt becomes zero */
-	blkcg_cgwb_put(blkcg);
+	/* triggers blkg destruction if no online users left */
+	blkcg_unpin_online(blkcg);
 
 	fprop_local_destroy_percpu(&wb->memcg_completions);
 	percpu_ref_exit(&wb->refcnt);
@@ -592,7 +592,7 @@ static int cgwb_create(struct backing_dev_info *bdi,
 			list_add_tail_rcu(&wb->bdi_node, &bdi->wb_list);
 			list_add(&wb->memcg_node, memcg_cgwb_list);
 			list_add(&wb->blkcg_node, blkcg_cgwb_list);
-			blkcg_cgwb_get(blkcg);
+			blkcg_pin_online(blkcg);
 			css_get(memcg_css);
 			css_get(blkcg_css);
 		}
diff --git a/mm/cma.c b/mm/cma.c
index be55d19..0463ad2 100644
--- a/mm/cma.c
+++ b/mm/cma.c
@@ -220,7 +220,7 @@ int __init cma_init_reserved_mem(phys_addr_t base, phys_addr_t size,
 }
 
 /**
- * cma_declare_contiguous() - reserve custom contiguous area
+ * cma_declare_contiguous_nid() - reserve custom contiguous area
  * @base: Base address of the reserved area optional, use 0 for any
  * @size: Size of the reserved area (in bytes),
  * @limit: End address of the reserved memory (optional, 0 for any).
@@ -229,6 +229,7 @@ int __init cma_init_reserved_mem(phys_addr_t base, phys_addr_t size,
  * @fixed: hint about where to place the reserved area
  * @name: The name of the area. See function cma_init_reserved_mem()
  * @res_cma: Pointer to store the created cma region.
+ * @nid: nid of the free area to find, %NUMA_NO_NODE for any node
  *
  * This function reserves memory from early allocator. It should be
  * called by arch specific code once the early allocator (memblock or bootmem)
@@ -238,10 +239,11 @@ int __init cma_init_reserved_mem(phys_addr_t base, phys_addr_t size,
  * If @fixed is true, reserve contiguous area at exactly @base.  If false,
  * reserve in range from @base to @limit.
  */
-int __init cma_declare_contiguous(phys_addr_t base,
+int __init cma_declare_contiguous_nid(phys_addr_t base,
 			phys_addr_t size, phys_addr_t limit,
 			phys_addr_t alignment, unsigned int order_per_bit,
-			bool fixed, const char *name, struct cma **res_cma)
+			bool fixed, const char *name, struct cma **res_cma,
+			int nid)
 {
 	phys_addr_t memblock_end = memblock_end_of_DRAM();
 	phys_addr_t highmem_start;
@@ -336,14 +338,14 @@ int __init cma_declare_contiguous(phys_addr_t base,
 		 * memory in case of failure.
 		 */
 		if (base < highmem_start && limit > highmem_start) {
-			addr = memblock_phys_alloc_range(size, alignment,
-							 highmem_start, limit);
+			addr = memblock_alloc_range_nid(size, alignment,
+					highmem_start, limit, nid, false);
 			limit = highmem_start;
 		}
 
 		if (!addr) {
-			addr = memblock_phys_alloc_range(size, alignment, base,
-							 limit);
+			addr = memblock_alloc_range_nid(size, alignment, base,
+					limit, nid, false);
 			if (!addr) {
 				ret = -ENOMEM;
 				goto err;
diff --git a/mm/compaction.c b/mm/compaction.c
index df3da2f..46f0fcc 100644
--- a/mm/compaction.c
+++ b/mm/compaction.c
@@ -481,6 +481,7 @@ static bool test_and_set_skip(struct compact_control *cc, struct page *page,
  */
 static bool compact_lock_irqsave(spinlock_t *lock, unsigned long *flags,
 						struct compact_control *cc)
+	__acquires(lock)
 {
 	/* Track if the lock is contended in async mode */
 	if (cc->mode == MIGRATE_ASYNC && !cc->contended) {
@@ -989,7 +990,7 @@ isolate_migratepages_block(struct compact_control *cc, unsigned long low_pfn,
 		/* Successfully isolated */
 		del_page_from_lru_list(page, lruvec, page_lru(page));
 		mod_node_page_state(page_pgdat(page),
-				NR_ISOLATED_ANON + page_is_file_cache(page),
+				NR_ISOLATED_ANON + page_is_file_lru(page),
 				hpage_nr_pages(page));
 
 isolate_success:
diff --git a/mm/dmapool.c b/mm/dmapool.c
index fe5d330..f9fb9bb 100644
--- a/mm/dmapool.c
+++ b/mm/dmapool.c
@@ -144,9 +144,7 @@ struct dma_pool *dma_pool_create(const char *name, struct device *dev,
 	else if (size < 4)
 		size = 4;
 
-	if ((size % align) != 0)
-		size = ALIGN(size, align);
-
+	size = ALIGN(size, align);
 	allocation = max_t(size_t, size, PAGE_SIZE);
 
 	if (!boundary)
diff --git a/mm/filemap.c b/mm/filemap.c
index 0fbdc8e..23a051a 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -1693,6 +1693,11 @@ EXPORT_SYMBOL(pagecache_get_page);
  * Any shadow entries of evicted pages, or swap entries from
  * shmem/tmpfs, are included in the returned array.
  *
+ * If it finds a Transparent Huge Page, head or tail, find_get_entries()
+ * stops at that page: the caller is likely to have a better way to handle
+ * the compound page as a whole, and then skip its extent, than repeatedly
+ * calling find_get_entries() to return all its tails.
+ *
  * Return: the number of pages and shadow entries which were found.
  */
 unsigned find_get_entries(struct address_space *mapping,
@@ -1724,8 +1729,15 @@ unsigned find_get_entries(struct address_space *mapping,
 		/* Has the page moved or been split? */
 		if (unlikely(page != xas_reload(&xas)))
 			goto put_page;
-		page = find_subpage(page, xas.xa_index);
 
+		/*
+		 * Terminate early on finding a THP, to allow the caller to
+		 * handle it all at once; but continue if this is hugetlbfs.
+		 */
+		if (PageTransHuge(page) && !PageHuge(page)) {
+			page = find_subpage(page, xas.xa_index);
+			nr_entries = ret + 1;
+		}
 export:
 		indices[ret] = xas.xa_index;
 		entries[ret] = page;
diff --git a/mm/gup.c b/mm/gup.c
index da3e031..6076df8e 100644
--- a/mm/gup.c
+++ b/mm/gup.c
@@ -351,7 +351,8 @@ static struct page *no_page_table(struct vm_area_struct *vma,
 	 * But we can only make this optimization where a hole would surely
 	 * be zero-filled if handle_mm_fault() actually did handle it.
 	 */
-	if ((flags & FOLL_DUMP) && (!vma->vm_ops || !vma->vm_ops->fault))
+	if ((flags & FOLL_DUMP) &&
+			(vma_is_anonymous(vma) || !vma->vm_ops->fault))
 		return ERR_PTR(-EFAULT);
 	return NULL;
 }
@@ -1101,7 +1102,7 @@ static long __get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
 				goto retry;
 			case -EBUSY:
 				ret = 0;
-				/* FALLTHRU */
+				fallthrough;
 			case -EFAULT:
 			case -ENOMEM:
 			case -EHWPOISON:
@@ -1325,10 +1326,12 @@ static __always_inline long __get_user_pages_locked(struct task_struct *tsk,
 		 * start trying again otherwise it can loop forever.
 		 */
 
-		if (fatal_signal_pending(current))
+		if (fatal_signal_pending(current)) {
+			if (!pages_done)
+				pages_done = -EINTR;
 			break;
+		}
 
-		*locked = 1;
 		ret = down_read_killable(&mm->mmap_sem);
 		if (ret) {
 			BUG_ON(ret > 0);
@@ -1337,6 +1340,7 @@ static __always_inline long __get_user_pages_locked(struct task_struct *tsk,
 			break;
 		}
 
+		*locked = 1;
 		ret = __get_user_pages(tsk, mm, start, 1, flags | FOLL_TRIED,
 				       pages, NULL, locked);
 		if (!*locked) {
@@ -1416,7 +1420,7 @@ long populate_vma_page_range(struct vm_area_struct *vma,
 	 * We want mlock to succeed for regions that have any permissions
 	 * other than PROT_NONE.
 	 */
-	if (vma->vm_flags & (VM_READ | VM_WRITE | VM_EXEC))
+	if (vma_is_accessible(vma))
 		gup_flags |= FOLL_FORCE;
 
 	/*
@@ -1676,7 +1680,7 @@ static long check_and_migrate_cma_pages(struct task_struct *tsk,
 					list_add_tail(&head->lru, &cma_page_list);
 					mod_node_page_state(page_pgdat(head),
 							    NR_ISOLATED_ANON +
-							    page_is_file_cache(head),
+							    page_is_file_lru(head),
 							    hpage_nr_pages(head));
 				}
 			}
diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index b1e069e..6ecd104 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -326,7 +326,7 @@ static struct attribute *hugepage_attr[] = {
 	&defrag_attr.attr,
 	&use_zero_page_attr.attr,
 	&hpage_pmd_size_attr.attr,
-#if defined(CONFIG_SHMEM) && defined(CONFIG_TRANSPARENT_HUGE_PAGECACHE)
+#ifdef CONFIG_SHMEM
 	&shmem_enabled_attr.attr,
 #endif
 #ifdef CONFIG_DEBUG_VM
@@ -597,6 +597,7 @@ static vm_fault_t __do_huge_pmd_anonymous_page(struct vm_fault *vmf,
 	if (mem_cgroup_try_charge_delay(page, vma->vm_mm, gfp, &memcg, true)) {
 		put_page(page);
 		count_vm_event(THP_FAULT_FALLBACK);
+		count_vm_event(THP_FAULT_FALLBACK_CHARGE);
 		return VM_FAULT_FALLBACK;
 	}
 
@@ -824,11 +825,24 @@ static void insert_pfn_pmd(struct vm_area_struct *vma, unsigned long addr,
 		pte_free(mm, pgtable);
 }
 
-vm_fault_t vmf_insert_pfn_pmd(struct vm_fault *vmf, pfn_t pfn, bool write)
+/**
+ * vmf_insert_pfn_pmd_prot - insert a pmd size pfn
+ * @vmf: Structure describing the fault
+ * @pfn: pfn to insert
+ * @pgprot: page protection to use
+ * @write: whether it's a write fault
+ *
+ * Insert a pmd size pfn. See vmf_insert_pfn() for additional info and
+ * also consult the vmf_insert_mixed_prot() documentation when
+ * @pgprot != @vmf->vma->vm_page_prot.
+ *
+ * Return: vm_fault_t value.
+ */
+vm_fault_t vmf_insert_pfn_pmd_prot(struct vm_fault *vmf, pfn_t pfn,
+				   pgprot_t pgprot, bool write)
 {
 	unsigned long addr = vmf->address & PMD_MASK;
 	struct vm_area_struct *vma = vmf->vma;
-	pgprot_t pgprot = vma->vm_page_prot;
 	pgtable_t pgtable = NULL;
 
 	/*
@@ -856,7 +870,7 @@ vm_fault_t vmf_insert_pfn_pmd(struct vm_fault *vmf, pfn_t pfn, bool write)
 	insert_pfn_pmd(vma, addr, vmf->pmd, pfn, pgprot, write, pgtable);
 	return VM_FAULT_NOPAGE;
 }
-EXPORT_SYMBOL_GPL(vmf_insert_pfn_pmd);
+EXPORT_SYMBOL_GPL(vmf_insert_pfn_pmd_prot);
 
 #ifdef CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD
 static pud_t maybe_pud_mkwrite(pud_t pud, struct vm_area_struct *vma)
@@ -902,11 +916,24 @@ static void insert_pfn_pud(struct vm_area_struct *vma, unsigned long addr,
 	spin_unlock(ptl);
 }
 
-vm_fault_t vmf_insert_pfn_pud(struct vm_fault *vmf, pfn_t pfn, bool write)
+/**
+ * vmf_insert_pfn_pud_prot - insert a pud size pfn
+ * @vmf: Structure describing the fault
+ * @pfn: pfn to insert
+ * @pgprot: page protection to use
+ * @write: whether it's a write fault
+ *
+ * Insert a pud size pfn. See vmf_insert_pfn() for additional info and
+ * also consult the vmf_insert_mixed_prot() documentation when
+ * @pgprot != @vmf->vma->vm_page_prot.
+ *
+ * Return: vm_fault_t value.
+ */
+vm_fault_t vmf_insert_pfn_pud_prot(struct vm_fault *vmf, pfn_t pfn,
+				   pgprot_t pgprot, bool write)
 {
 	unsigned long addr = vmf->address & PUD_MASK;
 	struct vm_area_struct *vma = vmf->vma;
-	pgprot_t pgprot = vma->vm_page_prot;
 
 	/*
 	 * If we had pud_special, we could avoid all these restrictions,
@@ -927,7 +954,7 @@ vm_fault_t vmf_insert_pfn_pud(struct vm_fault *vmf, pfn_t pfn, bool write)
 	insert_pfn_pud(vma, addr, vmf->pud, pfn, pgprot, write);
 	return VM_FAULT_NOPAGE;
 }
-EXPORT_SYMBOL_GPL(vmf_insert_pfn_pud);
+EXPORT_SYMBOL_GPL(vmf_insert_pfn_pud_prot);
 #endif /* CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD */
 
 static void touch_pmd(struct vm_area_struct *vma, unsigned long addr,
@@ -1017,6 +1044,14 @@ int copy_huge_pmd(struct mm_struct *dst_mm, struct mm_struct *src_mm,
 	ret = -EAGAIN;
 	pmd = *src_pmd;
 
+	/*
+	 * Make sure the _PAGE_UFFD_WP bit is cleared if the new VMA
+	 * does not have the VM_UFFD_WP, which means that the uffd
+	 * fork event is not enabled.
+	 */
+	if (!(vma->vm_flags & VM_UFFD_WP))
+		pmd = pmd_clear_uffd_wp(pmd);
+
 #ifdef CONFIG_ARCH_ENABLE_THP_MIGRATION
 	if (unlikely(is_swap_pmd(pmd))) {
 		swp_entry_t entry = pmd_to_swp_entry(pmd);
@@ -1420,6 +1455,7 @@ vm_fault_t do_huge_pmd_wp_page(struct vm_fault *vmf, pmd_t orig_pmd)
 			put_page(page);
 		ret |= VM_FAULT_FALLBACK;
 		count_vm_event(THP_FAULT_FALLBACK);
+		count_vm_event(THP_FAULT_FALLBACK_CHARGE);
 		goto out;
 	}
 
@@ -1819,7 +1855,7 @@ int zap_huge_pmd(struct mmu_gather *tlb, struct vm_area_struct *vma,
 	orig_pmd = pmdp_huge_get_and_clear_full(tlb->mm, addr, pmd,
 			tlb->fullmm);
 	tlb_remove_pmd_tlb_entry(tlb, pmd, addr);
-	if (vma_is_dax(vma)) {
+	if (vma_is_special_huge(vma)) {
 		if (arch_needs_pgtable_deposit())
 			zap_deposited_table(tlb->mm, pmd);
 		spin_unlock(ptl);
@@ -1951,13 +1987,16 @@ bool move_huge_pmd(struct vm_area_struct *vma, unsigned long old_addr,
  *  - HPAGE_PMD_NR is protections changed and TLB flush necessary
  */
 int change_huge_pmd(struct vm_area_struct *vma, pmd_t *pmd,
-		unsigned long addr, pgprot_t newprot, int prot_numa)
+		unsigned long addr, pgprot_t newprot, unsigned long cp_flags)
 {
 	struct mm_struct *mm = vma->vm_mm;
 	spinlock_t *ptl;
 	pmd_t entry;
 	bool preserve_write;
 	int ret;
+	bool prot_numa = cp_flags & MM_CP_PROT_NUMA;
+	bool uffd_wp = cp_flags & MM_CP_UFFD_WP;
+	bool uffd_wp_resolve = cp_flags & MM_CP_UFFD_WP_RESOLVE;
 
 	ptl = __pmd_trans_huge_lock(pmd, vma);
 	if (!ptl)
@@ -2024,6 +2063,17 @@ int change_huge_pmd(struct vm_area_struct *vma, pmd_t *pmd,
 	entry = pmd_modify(entry, newprot);
 	if (preserve_write)
 		entry = pmd_mk_savedwrite(entry);
+	if (uffd_wp) {
+		entry = pmd_wrprotect(entry);
+		entry = pmd_mkuffd_wp(entry);
+	} else if (uffd_wp_resolve) {
+		/*
+		 * Leave the write bit to be handled by PF interrupt
+		 * handler, then things like COW could be properly
+		 * handled.
+		 */
+		entry = pmd_clear_uffd_wp(entry);
+	}
 	ret = HPAGE_PMD_NR;
 	set_pmd_at(mm, addr, pmd, entry);
 	BUG_ON(vma_is_anonymous(vma) && !preserve_write && pmd_write(entry));
@@ -2083,7 +2133,7 @@ int zap_huge_pud(struct mmu_gather *tlb, struct vm_area_struct *vma,
 	 */
 	pudp_huge_get_and_clear_full(tlb->mm, addr, pud, tlb->fullmm);
 	tlb_remove_pud_tlb_entry(tlb, pud, addr);
-	if (vma_is_dax(vma)) {
+	if (vma_is_special_huge(vma)) {
 		spin_unlock(ptl);
 		/* No zero page support yet */
 	} else {
@@ -2172,7 +2222,7 @@ static void __split_huge_pmd_locked(struct vm_area_struct *vma, pmd_t *pmd,
 	struct page *page;
 	pgtable_t pgtable;
 	pmd_t old_pmd, _pmd;
-	bool young, write, soft_dirty, pmd_migration = false;
+	bool young, write, soft_dirty, pmd_migration = false, uffd_wp = false;
 	unsigned long addr;
 	int i;
 
@@ -2192,7 +2242,7 @@ static void __split_huge_pmd_locked(struct vm_area_struct *vma, pmd_t *pmd,
 		 */
 		if (arch_needs_pgtable_deposit())
 			zap_deposited_table(mm, pmd);
-		if (vma_is_dax(vma))
+		if (vma_is_special_huge(vma))
 			return;
 		page = pmd_page(_pmd);
 		if (!PageDirty(page) && pmd_dirty(_pmd))
@@ -2247,6 +2297,7 @@ static void __split_huge_pmd_locked(struct vm_area_struct *vma, pmd_t *pmd,
 		write = is_write_migration_entry(entry);
 		young = false;
 		soft_dirty = pmd_swp_soft_dirty(old_pmd);
+		uffd_wp = pmd_swp_uffd_wp(old_pmd);
 	} else {
 		page = pmd_page(old_pmd);
 		if (pmd_dirty(old_pmd))
@@ -2254,6 +2305,7 @@ static void __split_huge_pmd_locked(struct vm_area_struct *vma, pmd_t *pmd,
 		write = pmd_write(old_pmd);
 		young = pmd_young(old_pmd);
 		soft_dirty = pmd_soft_dirty(old_pmd);
+		uffd_wp = pmd_uffd_wp(old_pmd);
 	}
 	VM_BUG_ON_PAGE(!page_count(page), page);
 	page_ref_add(page, HPAGE_PMD_NR - 1);
@@ -2278,6 +2330,8 @@ static void __split_huge_pmd_locked(struct vm_area_struct *vma, pmd_t *pmd,
 			entry = swp_entry_to_pte(swp_entry);
 			if (soft_dirty)
 				entry = pte_swp_mksoft_dirty(entry);
+			if (uffd_wp)
+				entry = pte_swp_mkuffd_wp(entry);
 		} else {
 			entry = mk_pte(page + i, READ_ONCE(vma->vm_page_prot));
 			entry = maybe_mkwrite(entry, vma);
@@ -2287,6 +2341,8 @@ static void __split_huge_pmd_locked(struct vm_area_struct *vma, pmd_t *pmd,
 				entry = pte_mkold(entry);
 			if (soft_dirty)
 				entry = pte_mksoft_dirty(entry);
+			if (uffd_wp)
+				entry = pte_mkuffd_wp(entry);
 		}
 		pte = pte_offset_map(&_pmd, addr);
 		BUG_ON(!pte_none(*pte));
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index f9ea1e5..cd45915 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -28,6 +28,7 @@
 #include <linux/jhash.h>
 #include <linux/numa.h>
 #include <linux/llist.h>
+#include <linux/cma.h>
 
 #include <asm/page.h>
 #include <asm/pgtable.h>
@@ -44,6 +45,9 @@
 int hugetlb_max_hstate __read_mostly;
 unsigned int default_hstate_idx;
 struct hstate hstates[HUGE_MAX_HSTATE];
+
+static struct cma *hugetlb_cma[MAX_NUMNODES];
+
 /*
  * Minimum page order among possible hugepage sizes, set to a proper value
  * at boot time.
@@ -1228,6 +1232,14 @@ static void destroy_compound_gigantic_page(struct page *page,
 
 static void free_gigantic_page(struct page *page, unsigned int order)
 {
+	/*
+	 * If the page isn't allocated using the cma allocator,
+	 * cma_release() returns false.
+	 */
+	if (IS_ENABLED(CONFIG_CMA) &&
+	    cma_release(hugetlb_cma[page_to_nid(page)], page, 1 << order))
+		return;
+
 	free_contig_range(page_to_pfn(page), 1 << order);
 }
 
@@ -1237,6 +1249,21 @@ static struct page *alloc_gigantic_page(struct hstate *h, gfp_t gfp_mask,
 {
 	unsigned long nr_pages = 1UL << huge_page_order(h);
 
+	if (IS_ENABLED(CONFIG_CMA)) {
+		struct page *page;
+		int node;
+
+		for_each_node_mask(node, *nodemask) {
+			if (!hugetlb_cma[node])
+				continue;
+
+			page = cma_alloc(hugetlb_cma[node], nr_pages,
+					 huge_page_order(h), true);
+			if (page)
+				return page;
+		}
+	}
+
 	return alloc_contig_pages(nr_pages, gfp_mask, nid, nodemask);
 }
 
@@ -1281,8 +1308,14 @@ static void update_and_free_page(struct hstate *h, struct page *page)
 	set_compound_page_dtor(page, NULL_COMPOUND_DTOR);
 	set_page_refcounted(page);
 	if (hstate_is_gigantic(h)) {
+		/*
+		 * Temporarily drop the hugetlb_lock, because
+		 * we might block in free_gigantic_page().
+		 */
+		spin_unlock(&hugetlb_lock);
 		destroy_compound_gigantic_page(page, huge_page_order(h));
 		free_gigantic_page(page, huge_page_order(h));
+		spin_lock(&hugetlb_lock);
 	} else {
 		__free_pages(page, huge_page_order(h));
 	}
@@ -2010,6 +2043,7 @@ struct page *alloc_huge_page_vma(struct hstate *h, struct vm_area_struct *vma,
  * of size 'delta'.
  */
 static int gather_surplus_pages(struct hstate *h, int delta)
+	__must_hold(&hugetlb_lock)
 {
 	struct list_head surplus_list;
 	struct page *page, *tmp;
@@ -2538,6 +2572,10 @@ static void __init hugetlb_hstate_alloc_pages(struct hstate *h)
 
 	for (i = 0; i < h->max_huge_pages; ++i) {
 		if (hstate_is_gigantic(h)) {
+			if (IS_ENABLED(CONFIG_CMA) && hugetlb_cma[0]) {
+				pr_warn_once("HugeTLB: hugetlb_cma is enabled, skip boot time allocation\n");
+				break;
+			}
 			if (!alloc_bootmem_huge_page(h))
 				break;
 		} else if (!alloc_pool_huge_page(h,
@@ -3193,6 +3231,7 @@ static int __init hugetlb_init(void)
 			default_hstate.max_huge_pages = default_hstate_max_huge_pages;
 	}
 
+	hugetlb_cma_check();
 	hugetlb_init_hstates();
 	gather_bootmem_prealloc();
 	report_hugepages();
@@ -5505,3 +5544,74 @@ void move_hugetlb_state(struct page *oldpage, struct page *newpage, int reason)
 		spin_unlock(&hugetlb_lock);
 	}
 }
+
+#ifdef CONFIG_CMA
+static unsigned long hugetlb_cma_size __initdata;
+static bool cma_reserve_called __initdata;
+
+static int __init cmdline_parse_hugetlb_cma(char *p)
+{
+	hugetlb_cma_size = memparse(p, &p);
+	return 0;
+}
+
+early_param("hugetlb_cma", cmdline_parse_hugetlb_cma);
+
+void __init hugetlb_cma_reserve(int order)
+{
+	unsigned long size, reserved, per_node;
+	int nid;
+
+	cma_reserve_called = true;
+
+	if (!hugetlb_cma_size)
+		return;
+
+	if (hugetlb_cma_size < (PAGE_SIZE << order)) {
+		pr_warn("hugetlb_cma: cma area should be at least %lu MiB\n",
+			(PAGE_SIZE << order) / SZ_1M);
+		return;
+	}
+
+	/*
+	 * If 3 GB area is requested on a machine with 4 numa nodes,
+	 * let's allocate 1 GB on first three nodes and ignore the last one.
+	 */
+	per_node = DIV_ROUND_UP(hugetlb_cma_size, nr_online_nodes);
+	pr_info("hugetlb_cma: reserve %lu MiB, up to %lu MiB per node\n",
+		hugetlb_cma_size / SZ_1M, per_node / SZ_1M);
+
+	reserved = 0;
+	for_each_node_state(nid, N_ONLINE) {
+		int res;
+
+		size = min(per_node, hugetlb_cma_size - reserved);
+		size = round_up(size, PAGE_SIZE << order);
+
+		res = cma_declare_contiguous_nid(0, size, 0, PAGE_SIZE << order,
+						 0, false, "hugetlb",
+						 &hugetlb_cma[nid], nid);
+		if (res) {
+			pr_warn("hugetlb_cma: reservation failed: err %d, node %d",
+				res, nid);
+			continue;
+		}
+
+		reserved += size;
+		pr_info("hugetlb_cma: reserved %lu MiB on node %d\n",
+			size / SZ_1M, nid);
+
+		if (reserved >= hugetlb_cma_size)
+			break;
+	}
+}
+
+void __init hugetlb_cma_check(void)
+{
+	if (!hugetlb_cma_size || cma_reserve_called)
+		return;
+
+	pr_warn("hugetlb_cma: the option isn't supported by current arch\n");
+}
+
+#endif /* CONFIG_CMA */
diff --git a/mm/hugetlb_cgroup.c b/mm/hugetlb_cgroup.c
index c2d7ae6..aabf65d4 100644
--- a/mm/hugetlb_cgroup.c
+++ b/mm/hugetlb_cgroup.c
@@ -467,14 +467,14 @@ static int hugetlb_cgroup_read_u64_max(struct seq_file *seq, void *v)
 	switch (MEMFILE_ATTR(cft->private)) {
 	case RES_RSVD_USAGE:
 		counter = &h_cg->rsvd_hugepage[idx];
-		/* Fall through. */
+		fallthrough;
 	case RES_USAGE:
 		val = (u64)page_counter_read(counter);
 		seq_printf(seq, "%llu\n", val * PAGE_SIZE);
 		break;
 	case RES_RSVD_LIMIT:
 		counter = &h_cg->rsvd_hugepage[idx];
-		/* Fall through. */
+		fallthrough;
 	case RES_LIMIT:
 		val = (u64)counter->max;
 		if (val == limit)
@@ -514,7 +514,7 @@ static ssize_t hugetlb_cgroup_write(struct kernfs_open_file *of,
 	switch (MEMFILE_ATTR(of_cft(of)->private)) {
 	case RES_RSVD_LIMIT:
 		rsvd = true;
-		/* Fall through. */
+		fallthrough;
 	case RES_LIMIT:
 		mutex_lock(&hugetlb_limit_mutex);
 		ret = page_counter_set_max(
diff --git a/mm/internal.h b/mm/internal.h
index 2d58ae1..b5634e7 100644
--- a/mm/internal.h
+++ b/mm/internal.h
@@ -180,6 +180,8 @@ static inline struct page *pageblock_pfn_to_page(unsigned long start_pfn,
 }
 
 extern int __isolate_free_page(struct page *page, unsigned int order);
+extern void __putback_isolated_page(struct page *page, unsigned int order,
+				    int mt);
 extern void memblock_free_pages(struct page *page, unsigned long pfn,
 					unsigned int order);
 extern void __free_pages_core(struct page *page, unsigned int order);
diff --git a/mm/kasan/common.c b/mm/kasan/common.c
index e61b4a4..2906358 100644
--- a/mm/kasan/common.c
+++ b/mm/kasan/common.c
@@ -15,7 +15,6 @@
  */
 
 #include <linux/export.h>
-#include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/kasan.h>
 #include <linux/kernel.h>
@@ -42,28 +41,6 @@
 #include "kasan.h"
 #include "../slab.h"
 
-static inline int in_irqentry_text(unsigned long ptr)
-{
-	return (ptr >= (unsigned long)&__irqentry_text_start &&
-		ptr < (unsigned long)&__irqentry_text_end) ||
-		(ptr >= (unsigned long)&__softirqentry_text_start &&
-		 ptr < (unsigned long)&__softirqentry_text_end);
-}
-
-static inline unsigned int filter_irq_stacks(unsigned long *entries,
-					     unsigned int nr_entries)
-{
-	unsigned int i;
-
-	for (i = 0; i < nr_entries; i++) {
-		if (in_irqentry_text(entries[i])) {
-			/* Include the irqentry function into the stack. */
-			return i + 1;
-		}
-	}
-	return nr_entries;
-}
-
 static inline depot_stack_handle_t save_stack(gfp_t flags)
 {
 	unsigned long entries[KASAN_STACK_DEPTH];
diff --git a/mm/kasan/report.c b/mm/kasan/report.c
index cf5c17d..80f23c9 100644
--- a/mm/kasan/report.c
+++ b/mm/kasan/report.c
@@ -92,8 +92,16 @@ static void end_report(unsigned long *flags)
 	pr_err("==================================================================\n");
 	add_taint(TAINT_BAD_PAGE, LOCKDEP_NOW_UNRELIABLE);
 	spin_unlock_irqrestore(&report_lock, *flags);
-	if (panic_on_warn)
+	if (panic_on_warn) {
+		/*
+		 * This thread may hit another WARN() in the panic path.
+		 * Resetting this prevents additional WARN() from panicking the
+		 * system on this thread.  Other threads are blocked by the
+		 * panic_mutex in panic().
+		 */
+		panic_on_warn = 0;
 		panic("panic_on_warn set ...\n");
+	}
 	kasan_enable_current();
 }
 
diff --git a/mm/khugepaged.c b/mm/khugepaged.c
index c659c68..99d77ff 100644
--- a/mm/khugepaged.c
+++ b/mm/khugepaged.c
@@ -29,6 +29,7 @@ enum scan_result {
 	SCAN_PMD_NULL,
 	SCAN_EXCEED_NONE_PTE,
 	SCAN_PTE_NON_PRESENT,
+	SCAN_PTE_UFFD_WP,
 	SCAN_PAGE_RO,
 	SCAN_LACK_REFERENCED_PAGE,
 	SCAN_PAGE_NULL,
@@ -414,8 +415,6 @@ static bool hugepage_vma_check(struct vm_area_struct *vma,
 	    (IS_ENABLED(CONFIG_READ_ONLY_THP_FOR_FS) &&
 	     vma->vm_file &&
 	     (vm_flags & VM_DENYWRITE))) {
-		if (!IS_ENABLED(CONFIG_TRANSPARENT_HUGE_PAGECACHE))
-			return false;
 		return IS_ALIGNED((vma->vm_start >> PAGE_SHIFT) - vma->vm_pgoff,
 				HPAGE_PMD_NR);
 	}
@@ -513,7 +512,7 @@ void __khugepaged_exit(struct mm_struct *mm)
 
 static void release_pte_page(struct page *page)
 {
-	dec_node_page_state(page, NR_ISOLATED_ANON + page_is_file_cache(page));
+	dec_node_page_state(page, NR_ISOLATED_ANON + page_is_file_lru(page));
 	unlock_page(page);
 	putback_lru_page(page);
 }
@@ -613,7 +612,7 @@ static int __collapse_huge_page_isolate(struct vm_area_struct *vma,
 			goto out;
 		}
 		inc_node_page_state(page,
-				NR_ISOLATED_ANON + page_is_file_cache(page));
+				NR_ISOLATED_ANON + page_is_file_lru(page));
 		VM_BUG_ON_PAGE(!PageLocked(page), page);
 		VM_BUG_ON_PAGE(PageLRU(page), page);
 
@@ -1139,6 +1138,15 @@ static int khugepaged_scan_pmd(struct mm_struct *mm,
 		pte_t pteval = *_pte;
 		if (is_swap_pte(pteval)) {
 			if (++unmapped <= khugepaged_max_ptes_swap) {
+				/*
+				 * Always be strict with uffd-wp
+				 * enabled swap entries.  Please see
+				 * comment below for pte_uffd_wp().
+				 */
+				if (pte_swp_uffd_wp(pteval)) {
+					result = SCAN_PTE_UFFD_WP;
+					goto out_unmap;
+				}
 				continue;
 			} else {
 				result = SCAN_EXCEED_SWAP_PTE;
@@ -1158,6 +1166,19 @@ static int khugepaged_scan_pmd(struct mm_struct *mm,
 			result = SCAN_PTE_NON_PRESENT;
 			goto out_unmap;
 		}
+		if (pte_uffd_wp(pteval)) {
+			/*
+			 * Don't collapse the page if any of the small
+			 * PTEs are armed with uffd write protection.
+			 * Here we can also mark the new huge pmd as
+			 * write protected if any of the small ones is
+			 * marked but that could bring uknown
+			 * userfault messages that falls outside of
+			 * the registered range.  So, just be simple.
+			 */
+			result = SCAN_PTE_UFFD_WP;
+			goto out_unmap;
+		}
 		if (pte_write(pteval))
 			writable = true;
 
@@ -1258,7 +1279,7 @@ static void collect_mm_slot(struct mm_slot *mm_slot)
 	}
 }
 
-#if defined(CONFIG_SHMEM) && defined(CONFIG_TRANSPARENT_HUGE_PAGECACHE)
+#ifdef CONFIG_SHMEM
 /*
  * Notify khugepaged that given addr of the mm is pte-mapped THP. Then
  * khugepaged should try to collapse the page table.
@@ -1973,6 +1994,8 @@ static unsigned int khugepaged_scan_mm_slot(unsigned int pages,
 		if (khugepaged_scan.address < hstart)
 			khugepaged_scan.address = hstart;
 		VM_BUG_ON(khugepaged_scan.address & ~HPAGE_PMD_MASK);
+		if (shmem_file(vma->vm_file) && !shmem_huge_enabled(vma))
+			goto skip;
 
 		while (khugepaged_scan.address < hend) {
 			int ret;
@@ -1984,14 +2007,10 @@ static unsigned int khugepaged_scan_mm_slot(unsigned int pages,
 				  khugepaged_scan.address + HPAGE_PMD_SIZE >
 				  hend);
 			if (IS_ENABLED(CONFIG_SHMEM) && vma->vm_file) {
-				struct file *file;
+				struct file *file = get_file(vma->vm_file);
 				pgoff_t pgoff = linear_page_index(vma,
 						khugepaged_scan.address);
 
-				if (shmem_file(vma->vm_file)
-				    && !shmem_huge_enabled(vma))
-					goto skip;
-				file = get_file(vma->vm_file);
 				up_read(&mm->mmap_sem);
 				ret = 1;
 				khugepaged_scan_file(mm, file, pgoff, hpage);
diff --git a/mm/ksm.c b/mm/ksm.c
index d17c7d5..a558da9 100644
--- a/mm/ksm.c
+++ b/mm/ksm.c
@@ -455,7 +455,7 @@ static inline bool ksm_test_exit(struct mm_struct *mm)
 /*
  * We use break_ksm to break COW on a ksm page: it's a stripped down
  *
- *	if (get_user_pages(addr, 1, 1, 1, &page, NULL) == 1)
+ *	if (get_user_pages(addr, 1, FOLL_WRITE, &page, NULL) == 1)
  *		put_page(page);
  *
  * but taking great care only to touch a ksm page, in a VM_MERGEABLE vma,
@@ -2813,8 +2813,7 @@ static int ksm_memory_callback(struct notifier_block *self,
 		 */
 		ksm_check_stable_tree(mn->start_pfn,
 				      mn->start_pfn + mn->nr_pages);
-		/* fallthrough */
-
+		fallthrough;
 	case MEM_CANCEL_OFFLINE:
 		mutex_lock(&ksm_thread_mutex);
 		ksm_run &= ~KSM_RUN_OFFLINE;
diff --git a/mm/list_lru.c b/mm/list_lru.c
index 8de5e37..4d5294c3 100644
--- a/mm/list_lru.c
+++ b/mm/list_lru.c
@@ -223,7 +223,7 @@ __list_lru_walk_one(struct list_lru_node *nlru, int memcg_idx,
 		switch (ret) {
 		case LRU_REMOVED_RETRY:
 			assert_spin_locked(&nlru->lock);
-			/* fall through */
+			fallthrough;
 		case LRU_REMOVED:
 			isolated++;
 			nlru->nr_items--;
diff --git a/mm/memblock.c b/mm/memblock.c
index 4d06bba..c79ba6f 100644
--- a/mm/memblock.c
+++ b/mm/memblock.c
@@ -1349,7 +1349,7 @@ __next_mem_pfn_range_in_zone(u64 *idx, struct zone *zone,
  * Return:
  * Physical address of allocated memory block on success, %0 on failure.
  */
-static phys_addr_t __init memblock_alloc_range_nid(phys_addr_t size,
+phys_addr_t __init memblock_alloc_range_nid(phys_addr_t size,
 					phys_addr_t align, phys_addr_t start,
 					phys_addr_t end, int nid,
 					bool exact_nid)
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index ca19486..5beea03 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -2254,7 +2254,8 @@ static void reclaim_high(struct mem_cgroup *memcg,
 			continue;
 		memcg_memory_event(memcg, MEMCG_HIGH);
 		try_to_free_mem_cgroup_pages(memcg, nr_pages, gfp_mask, true);
-	} while ((memcg = parent_mem_cgroup(memcg)));
+	} while ((memcg = parent_mem_cgroup(memcg)) &&
+		 !mem_cgroup_is_root(memcg));
 }
 
 static void high_work_func(struct work_struct *work)
@@ -2335,6 +2336,9 @@ static unsigned long calculate_high_delay(struct mem_cgroup *memcg,
 		usage = page_counter_read(&memcg->memory);
 		high = READ_ONCE(memcg->high);
 
+		if (usage <= high)
+			continue;
+
 		/*
 		 * Prevent division by 0 in overage calculation by acting as if
 		 * it was a threshold of 1 page
@@ -5812,7 +5816,7 @@ static int mem_cgroup_move_charge_pte_range(pmd_t *pmd,
 		switch (get_mctgt_type(vma, addr, ptent, &target)) {
 		case MC_TARGET_DEVICE:
 			device = true;
-			/* fall through */
+			fallthrough;
 		case MC_TARGET_PAGE:
 			page = target.page;
 			/*
diff --git a/mm/memory-failure.c b/mm/memory-failure.c
index 1c961cd..a96364b 100644
--- a/mm/memory-failure.c
+++ b/mm/memory-failure.c
@@ -1810,7 +1810,7 @@ static int __soft_offline_page(struct page *page, int flags)
 		 */
 		if (!__PageMovable(page))
 			inc_node_page_state(page, NR_ISOLATED_ANON +
-						page_is_file_cache(page));
+						page_is_file_lru(page));
 		list_add(&page->lru, &pagelist);
 		ret = migrate_pages(&pagelist, new_page, NULL, MPOL_MF_MOVE_ALL,
 					MIGRATE_SYNC, MR_MEMORY_FAILURE);
diff --git a/mm/memory.c b/mm/memory.c
index 5c356a5..f703fe8 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -733,6 +733,8 @@ copy_one_pte(struct mm_struct *dst_mm, struct mm_struct *src_mm,
 				pte = swp_entry_to_pte(entry);
 				if (pte_swp_soft_dirty(*src_pte))
 					pte = pte_swp_mksoft_dirty(pte);
+				if (pte_swp_uffd_wp(*src_pte))
+					pte = pte_swp_mkuffd_wp(pte);
 				set_pte_at(src_mm, addr, src_pte, pte);
 			}
 		} else if (is_device_private_entry(entry)) {
@@ -762,6 +764,8 @@ copy_one_pte(struct mm_struct *dst_mm, struct mm_struct *src_mm,
 			    is_cow_mapping(vm_flags)) {
 				make_device_private_entry_read(&entry);
 				pte = swp_entry_to_pte(entry);
+				if (pte_swp_uffd_wp(*src_pte))
+					pte = pte_swp_mkuffd_wp(pte);
 				set_pte_at(src_mm, addr, src_pte, pte);
 			}
 		}
@@ -785,6 +789,14 @@ copy_one_pte(struct mm_struct *dst_mm, struct mm_struct *src_mm,
 		pte = pte_mkclean(pte);
 	pte = pte_mkold(pte);
 
+	/*
+	 * Make sure the _PAGE_UFFD_WP bit is cleared if the new VMA
+	 * does not have the VM_UFFD_WP, which means that the uffd
+	 * fork event is not enabled.
+	 */
+	if (!(vm_flags & VM_UFFD_WP))
+		pte = pte_clear_uffd_wp(pte);
+
 	page = vm_normal_page(vma, addr, pte);
 	if (page) {
 		get_page(page);
@@ -1407,8 +1419,7 @@ void zap_vma_ptes(struct vm_area_struct *vma, unsigned long address,
 }
 EXPORT_SYMBOL_GPL(zap_vma_ptes);
 
-pte_t *__get_locked_pte(struct mm_struct *mm, unsigned long addr,
-			spinlock_t **ptl)
+static pmd_t *walk_to_pmd(struct mm_struct *mm, unsigned long addr)
 {
 	pgd_t *pgd;
 	p4d_t *p4d;
@@ -1427,9 +1438,40 @@ pte_t *__get_locked_pte(struct mm_struct *mm, unsigned long addr,
 		return NULL;
 
 	VM_BUG_ON(pmd_trans_huge(*pmd));
+	return pmd;
+}
+
+pte_t *__get_locked_pte(struct mm_struct *mm, unsigned long addr,
+			spinlock_t **ptl)
+{
+	pmd_t *pmd = walk_to_pmd(mm, addr);
+
+	if (!pmd)
+		return NULL;
 	return pte_alloc_map_lock(mm, pmd, addr, ptl);
 }
 
+static int validate_page_before_insert(struct page *page)
+{
+	if (PageAnon(page) || PageSlab(page) || page_has_type(page))
+		return -EINVAL;
+	flush_dcache_page(page);
+	return 0;
+}
+
+static int insert_page_into_pte_locked(struct mm_struct *mm, pte_t *pte,
+			unsigned long addr, struct page *page, pgprot_t prot)
+{
+	if (!pte_none(*pte))
+		return -EBUSY;
+	/* Ok, finally just insert the thing.. */
+	get_page(page);
+	inc_mm_counter_fast(mm, mm_counter_file(page));
+	page_add_file_rmap(page, false);
+	set_pte_at(mm, addr, pte, mk_pte(page, prot));
+	return 0;
+}
+
 /*
  * This is the old fallback for page remapping.
  *
@@ -1445,31 +1487,135 @@ static int insert_page(struct vm_area_struct *vma, unsigned long addr,
 	pte_t *pte;
 	spinlock_t *ptl;
 
-	retval = -EINVAL;
-	if (PageAnon(page) || PageSlab(page) || page_has_type(page))
+	retval = validate_page_before_insert(page);
+	if (retval)
 		goto out;
 	retval = -ENOMEM;
-	flush_dcache_page(page);
 	pte = get_locked_pte(mm, addr, &ptl);
 	if (!pte)
 		goto out;
-	retval = -EBUSY;
-	if (!pte_none(*pte))
-		goto out_unlock;
-
-	/* Ok, finally just insert the thing.. */
-	get_page(page);
-	inc_mm_counter_fast(mm, mm_counter_file(page));
-	page_add_file_rmap(page, false);
-	set_pte_at(mm, addr, pte, mk_pte(page, prot));
-
-	retval = 0;
-out_unlock:
+	retval = insert_page_into_pte_locked(mm, pte, addr, page, prot);
 	pte_unmap_unlock(pte, ptl);
 out:
 	return retval;
 }
 
+#ifdef pte_index
+static int insert_page_in_batch_locked(struct mm_struct *mm, pmd_t *pmd,
+			unsigned long addr, struct page *page, pgprot_t prot)
+{
+	int err;
+
+	if (!page_count(page))
+		return -EINVAL;
+	err = validate_page_before_insert(page);
+	return err ? err : insert_page_into_pte_locked(
+		mm, pte_offset_map(pmd, addr), addr, page, prot);
+}
+
+/* insert_pages() amortizes the cost of spinlock operations
+ * when inserting pages in a loop. Arch *must* define pte_index.
+ */
+static int insert_pages(struct vm_area_struct *vma, unsigned long addr,
+			struct page **pages, unsigned long *num, pgprot_t prot)
+{
+	pmd_t *pmd = NULL;
+	spinlock_t *pte_lock = NULL;
+	struct mm_struct *const mm = vma->vm_mm;
+	unsigned long curr_page_idx = 0;
+	unsigned long remaining_pages_total = *num;
+	unsigned long pages_to_write_in_pmd;
+	int ret;
+more:
+	ret = -EFAULT;
+	pmd = walk_to_pmd(mm, addr);
+	if (!pmd)
+		goto out;
+
+	pages_to_write_in_pmd = min_t(unsigned long,
+		remaining_pages_total, PTRS_PER_PTE - pte_index(addr));
+
+	/* Allocate the PTE if necessary; takes PMD lock once only. */
+	ret = -ENOMEM;
+	if (pte_alloc(mm, pmd))
+		goto out;
+	pte_lock = pte_lockptr(mm, pmd);
+
+	while (pages_to_write_in_pmd) {
+		int pte_idx = 0;
+		const int batch_size = min_t(int, pages_to_write_in_pmd, 8);
+
+		spin_lock(pte_lock);
+		for (; pte_idx < batch_size; ++pte_idx) {
+			int err = insert_page_in_batch_locked(mm, pmd,
+				addr, pages[curr_page_idx], prot);
+			if (unlikely(err)) {
+				spin_unlock(pte_lock);
+				ret = err;
+				remaining_pages_total -= pte_idx;
+				goto out;
+			}
+			addr += PAGE_SIZE;
+			++curr_page_idx;
+		}
+		spin_unlock(pte_lock);
+		pages_to_write_in_pmd -= batch_size;
+		remaining_pages_total -= batch_size;
+	}
+	if (remaining_pages_total)
+		goto more;
+	ret = 0;
+out:
+	*num = remaining_pages_total;
+	return ret;
+}
+#endif  /* ifdef pte_index */
+
+/**
+ * vm_insert_pages - insert multiple pages into user vma, batching the pmd lock.
+ * @vma: user vma to map to
+ * @addr: target start user address of these pages
+ * @pages: source kernel pages
+ * @num: in: number of pages to map. out: number of pages that were *not*
+ * mapped. (0 means all pages were successfully mapped).
+ *
+ * Preferred over vm_insert_page() when inserting multiple pages.
+ *
+ * In case of error, we may have mapped a subset of the provided
+ * pages. It is the caller's responsibility to account for this case.
+ *
+ * The same restrictions apply as in vm_insert_page().
+ */
+int vm_insert_pages(struct vm_area_struct *vma, unsigned long addr,
+			struct page **pages, unsigned long *num)
+{
+#ifdef pte_index
+	const unsigned long end_addr = addr + (*num * PAGE_SIZE) - 1;
+
+	if (addr < vma->vm_start || end_addr >= vma->vm_end)
+		return -EFAULT;
+	if (!(vma->vm_flags & VM_MIXEDMAP)) {
+		BUG_ON(down_read_trylock(&vma->vm_mm->mmap_sem));
+		BUG_ON(vma->vm_flags & VM_PFNMAP);
+		vma->vm_flags |= VM_MIXEDMAP;
+	}
+	/* Defer page refcount checking till we're about to map that page. */
+	return insert_pages(vma, addr, pages, num, vma->vm_page_prot);
+#else
+	unsigned long idx = 0, pgcount = *num;
+	int err;
+
+	for (; idx < pgcount; ++idx) {
+		err = vm_insert_page(vma, addr + (PAGE_SIZE * idx), pages[idx]);
+		if (err)
+			break;
+	}
+	*num = pgcount - idx;
+	return err;
+#endif  /* ifdef pte_index */
+}
+EXPORT_SYMBOL(vm_insert_pages);
+
 /**
  * vm_insert_page - insert single page into user vma
  * @vma: user vma to map to
@@ -1940,7 +2086,7 @@ static inline int remap_p4d_range(struct mm_struct *mm, pgd_t *pgd,
  * @vma: user vma to map to
  * @addr: target user address to start at
  * @pfn: page frame number of kernel physical memory address
- * @size: size of map area
+ * @size: size of mapping area
  * @prot: page protection flags for this mapping
  *
  * Note: this is only safe if the mm semaphore is held when called.
@@ -2752,6 +2898,11 @@ static vm_fault_t do_wp_page(struct vm_fault *vmf)
 {
 	struct vm_area_struct *vma = vmf->vma;
 
+	if (userfaultfd_pte_wp(vma, *vmf->pte)) {
+		pte_unmap_unlock(vmf->pte, vmf->ptl);
+		return handle_userfault(vmf, VM_UFFD_WP);
+	}
+
 	vmf->page = vm_normal_page(vma, vmf->address, vmf->orig_pte);
 	if (!vmf->page) {
 		/*
@@ -3085,6 +3236,10 @@ vm_fault_t do_swap_page(struct vm_fault *vmf)
 	flush_icache_page(vma, page);
 	if (pte_swp_soft_dirty(vmf->orig_pte))
 		pte = pte_mksoft_dirty(pte);
+	if (pte_swp_uffd_wp(vmf->orig_pte)) {
+		pte = pte_mkuffd_wp(pte);
+		pte = pte_wrprotect(pte);
+	}
 	set_pte_at(vma->vm_mm, vmf->address, vmf->pte, pte);
 	arch_do_swap_page(vma->vm_mm, vma, vmf->address, pte, vmf->orig_pte);
 	vmf->orig_pte = pte;
@@ -3373,7 +3528,7 @@ static vm_fault_t pte_alloc_one_map(struct vm_fault *vmf)
 	return 0;
 }
 
-#ifdef CONFIG_TRANSPARENT_HUGE_PAGECACHE
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
 static void deposit_prealloc_pte(struct vm_fault *vmf)
 {
 	struct vm_area_struct *vma = vmf->vma;
@@ -3475,8 +3630,7 @@ vm_fault_t alloc_set_pte(struct vm_fault *vmf, struct mem_cgroup *memcg,
 	pte_t entry;
 	vm_fault_t ret;
 
-	if (pmd_none(*vmf->pmd) && PageTransCompound(page) &&
-			IS_ENABLED(CONFIG_TRANSPARENT_HUGE_PAGECACHE)) {
+	if (pmd_none(*vmf->pmd) && PageTransCompound(page)) {
 		/* THP on COW? */
 		VM_BUG_ON_PAGE(memcg, page);
 
@@ -3949,31 +4103,40 @@ static inline vm_fault_t create_huge_pmd(struct vm_fault *vmf)
 /* `inline' is required to avoid gcc 4.1.2 build error */
 static inline vm_fault_t wp_huge_pmd(struct vm_fault *vmf, pmd_t orig_pmd)
 {
-	if (vma_is_anonymous(vmf->vma))
+	if (vma_is_anonymous(vmf->vma)) {
+		if (userfaultfd_huge_pmd_wp(vmf->vma, orig_pmd))
+			return handle_userfault(vmf, VM_UFFD_WP);
 		return do_huge_pmd_wp_page(vmf, orig_pmd);
-	if (vmf->vma->vm_ops->huge_fault)
-		return vmf->vma->vm_ops->huge_fault(vmf, PE_SIZE_PMD);
+	}
+	if (vmf->vma->vm_ops->huge_fault) {
+		vm_fault_t ret = vmf->vma->vm_ops->huge_fault(vmf, PE_SIZE_PMD);
 
-	/* COW handled on pte level: split pmd */
-	VM_BUG_ON_VMA(vmf->vma->vm_flags & VM_SHARED, vmf->vma);
+		if (!(ret & VM_FAULT_FALLBACK))
+			return ret;
+	}
+
+	/* COW or write-notify handled on pte level: split pmd. */
 	__split_huge_pmd(vmf->vma, vmf->pmd, vmf->address, false, NULL);
 
 	return VM_FAULT_FALLBACK;
 }
 
-static inline bool vma_is_accessible(struct vm_area_struct *vma)
-{
-	return vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE);
-}
-
 static vm_fault_t create_huge_pud(struct vm_fault *vmf)
 {
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+#if defined(CONFIG_TRANSPARENT_HUGEPAGE) &&			\
+	defined(CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD)
 	/* No support for anonymous transparent PUD pages yet */
 	if (vma_is_anonymous(vmf->vma))
-		return VM_FAULT_FALLBACK;
-	if (vmf->vma->vm_ops->huge_fault)
-		return vmf->vma->vm_ops->huge_fault(vmf, PE_SIZE_PUD);
+		goto split;
+	if (vmf->vma->vm_ops->huge_fault) {
+		vm_fault_t ret = vmf->vma->vm_ops->huge_fault(vmf, PE_SIZE_PUD);
+
+		if (!(ret & VM_FAULT_FALLBACK))
+			return ret;
+	}
+split:
+	/* COW or write-notify not handled on PUD level: split pud.*/
+	__split_huge_pud(vmf->vma, vmf->pud, vmf->address);
 #endif /* CONFIG_TRANSPARENT_HUGEPAGE */
 	return VM_FAULT_FALLBACK;
 }
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index 19389cd..fc0aad0 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -67,18 +67,17 @@ void put_online_mems(void)
 bool movable_node_enabled = false;
 
 #ifndef CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE
-bool memhp_auto_online;
+int memhp_default_online_type = MMOP_OFFLINE;
 #else
-bool memhp_auto_online = true;
+int memhp_default_online_type = MMOP_ONLINE;
 #endif
-EXPORT_SYMBOL_GPL(memhp_auto_online);
 
 static int __init setup_memhp_default_state(char *str)
 {
-	if (!strcmp(str, "online"))
-		memhp_auto_online = true;
-	else if (!strcmp(str, "offline"))
-		memhp_auto_online = false;
+	const int online_type = memhp_online_type_from_str(str);
+
+	if (online_type >= 0)
+		memhp_default_online_type = online_type;
 
 	return 1;
 }
@@ -105,7 +104,13 @@ static struct resource *register_memory_resource(u64 start, u64 size)
 	unsigned long flags =  IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY;
 	char *resource_name = "System RAM";
 
-	if (start + size > max_mem_size)
+	/*
+	 * Make sure value parsed from 'mem=' only restricts memory adding
+	 * while booting, so that memory hotplug won't be impacted. Please
+	 * refer to document of 'mem=' in kernel-parameters.txt for more
+	 * details.
+	 */
+	if (start + size > max_mem_size && system_state < SYSTEM_RUNNING)
 		return ERR_PTR(-E2BIG);
 
 	/*
@@ -299,11 +304,15 @@ static int check_hotplug_memory_addressable(unsigned long pfn,
  * add the new pages.
  */
 int __ref __add_pages(int nid, unsigned long pfn, unsigned long nr_pages,
-		struct mhp_restrictions *restrictions)
+		struct mhp_params *params)
 {
+	const unsigned long end_pfn = pfn + nr_pages;
+	unsigned long cur_nr_pages;
 	int err;
-	unsigned long nr, start_sec, end_sec;
-	struct vmem_altmap *altmap = restrictions->altmap;
+	struct vmem_altmap *altmap = params->altmap;
+
+	if (WARN_ON_ONCE(!params->pgprot.pgprot))
+		return -EINVAL;
 
 	err = check_hotplug_memory_addressable(pfn, nr_pages);
 	if (err)
@@ -325,18 +334,13 @@ int __ref __add_pages(int nid, unsigned long pfn, unsigned long nr_pages,
 	if (err)
 		return err;
 
-	start_sec = pfn_to_section_nr(pfn);
-	end_sec = pfn_to_section_nr(pfn + nr_pages - 1);
-	for (nr = start_sec; nr <= end_sec; nr++) {
-		unsigned long pfns;
-
-		pfns = min(nr_pages, PAGES_PER_SECTION
-				- (pfn & ~PAGE_SECTION_MASK));
-		err = sparse_add_section(nid, pfn, pfns, altmap);
+	for (; pfn < end_pfn; pfn += cur_nr_pages) {
+		/* Select all remaining pages up to the next section boundary */
+		cur_nr_pages = min(end_pfn - pfn,
+				   SECTION_ALIGN_UP(pfn + 1) - pfn);
+		err = sparse_add_section(nid, pfn, cur_nr_pages, altmap);
 		if (err)
 			break;
-		pfn += pfns;
-		nr_pages -= pfns;
 		cond_resched();
 	}
 	vmemmap_populate_print_last();
@@ -494,7 +498,7 @@ static void __remove_section(unsigned long pfn, unsigned long nr_pages,
 			     unsigned long map_offset,
 			     struct vmem_altmap *altmap)
 {
-	struct mem_section *ms = __nr_to_section(pfn_to_section_nr(pfn));
+	struct mem_section *ms = __pfn_to_section(pfn);
 
 	if (WARN_ON_ONCE(!valid_section(ms)))
 		return;
@@ -528,7 +532,8 @@ void __remove_pages(unsigned long pfn, unsigned long nr_pages,
 	for (; pfn < end_pfn; pfn += cur_nr_pages) {
 		cond_resched();
 		/* Select all remaining pages up to the next section boundary */
-		cur_nr_pages = min(end_pfn - pfn, -(pfn | PAGE_SECTION_MASK));
+		cur_nr_pages = min(end_pfn - pfn,
+				   SECTION_ALIGN_UP(pfn + 1) - pfn);
 		__remove_section(pfn, cur_nr_pages, map_offset, altmap);
 		map_offset = 0;
 	}
@@ -988,6 +993,7 @@ static int check_hotplug_memory_range(u64 start, u64 size)
 
 static int online_memory_block(struct memory_block *mem, void *arg)
 {
+	mem->online_type = memhp_default_online_type;
 	return device_online(&mem->dev);
 }
 
@@ -999,7 +1005,7 @@ static int online_memory_block(struct memory_block *mem, void *arg)
  */
 int __ref add_memory_resource(int nid, struct resource *res)
 {
-	struct mhp_restrictions restrictions = {};
+	struct mhp_params params = { .pgprot = PAGE_KERNEL };
 	u64 start, size;
 	bool new_node = false;
 	int ret;
@@ -1027,7 +1033,7 @@ int __ref add_memory_resource(int nid, struct resource *res)
 	new_node = ret;
 
 	/* call arch's memory hotadd */
-	ret = arch_add_memory(nid, start, size, &restrictions);
+	ret = arch_add_memory(nid, start, size, &params);
 	if (ret < 0)
 		goto error;
 
@@ -1060,7 +1066,7 @@ int __ref add_memory_resource(int nid, struct resource *res)
 	mem_hotplug_done();
 
 	/* online pages if requested */
-	if (memhp_auto_online)
+	if (memhp_default_online_type != MMOP_OFFLINE)
 		walk_memory_blocks(start, size, NULL, online_memory_block);
 
 	return ret;
@@ -1317,7 +1323,7 @@ do_migrate_range(unsigned long start_pfn, unsigned long end_pfn)
 			list_add_tail(&page->lru, &source);
 			if (!__PageMovable(page))
 				inc_node_page_state(page, NR_ISOLATED_ANON +
-						    page_is_file_cache(page));
+						    page_is_file_lru(page));
 
 		} else {
 			pr_warn("failed to isolate pfn %lx\n", pfn);
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index 5fb427a..48ba972 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -127,6 +127,32 @@ static struct mempolicy default_policy = {
 
 static struct mempolicy preferred_node_policy[MAX_NUMNODES];
 
+/**
+ * numa_map_to_online_node - Find closest online node
+ * @nid: Node id to start the search
+ *
+ * Lookup the next closest node by distance if @nid is not online.
+ */
+int numa_map_to_online_node(int node)
+{
+	int min_dist = INT_MAX, dist, n, min_node;
+
+	if (node == NUMA_NO_NODE || node_online(node))
+		return node;
+
+	min_node = node;
+	for_each_online_node(n) {
+		dist = node_distance(node, n);
+		if (dist < min_dist) {
+			min_dist = dist;
+			min_node = n;
+		}
+	}
+
+	return min_node;
+}
+EXPORT_SYMBOL_GPL(numa_map_to_online_node);
+
 struct mempolicy *get_task_policy(struct task_struct *p)
 {
 	struct mempolicy *pol = p->mempolicy;
@@ -442,6 +468,7 @@ static inline bool queue_pages_required(struct page *page,
  */
 static int queue_pages_pmd(pmd_t *pmd, spinlock_t *ptl, unsigned long addr,
 				unsigned long end, struct mm_walk *walk)
+	__releases(ptl)
 {
 	int ret = 0;
 	struct page *page;
@@ -627,7 +654,7 @@ unsigned long change_prot_numa(struct vm_area_struct *vma,
 {
 	int nr_updated;
 
-	nr_updated = change_protection(vma, addr, end, PAGE_NONE, 0, 1);
+	nr_updated = change_protection(vma, addr, end, PAGE_NONE, MM_CP_PROT_NUMA);
 	if (nr_updated)
 		count_vm_numa_events(NUMA_PTE_UPDATES, nr_updated);
 
@@ -678,8 +705,7 @@ static int queue_pages_test_walk(unsigned long start, unsigned long end,
 
 	if (flags & MPOL_MF_LAZY) {
 		/* Similar to task_numa_work, skip inaccessible VMAs */
-		if (!is_vm_hugetlb_page(vma) &&
-			(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE)) &&
+		if (!is_vm_hugetlb_page(vma) && vma_is_accessible(vma) &&
 			!(vma->vm_flags & VM_MIXEDMAP))
 			change_prot_numa(vma, start, endvma);
 		return 1;
@@ -881,7 +907,6 @@ static void get_policy_nodemask(struct mempolicy *p, nodemask_t *nodes)
 
 	switch (p->mode) {
 	case MPOL_BIND:
-		/* Fall through */
 	case MPOL_INTERLEAVE:
 		*nodes = p->v.nodes;
 		break;
@@ -897,12 +922,15 @@ static void get_policy_nodemask(struct mempolicy *p, nodemask_t *nodes)
 
 static int lookup_node(struct mm_struct *mm, unsigned long addr)
 {
-	struct page *p;
+	struct page *p = NULL;
 	int err;
 
 	int locked = 1;
 	err = get_user_pages_locked(addr & PAGE_MASK, 1, 0, &p, &locked);
-	if (err >= 0) {
+	if (err == 0) {
+		/* E.g. GUP interrupted by fatal signal */
+		err = -EFAULT;
+	} else if (err > 0) {
 		err = page_to_nid(p);
 		put_page(p);
 	}
@@ -1023,7 +1051,7 @@ static int migrate_page_add(struct page *page, struct list_head *pagelist,
 		if (!isolate_lru_page(head)) {
 			list_add_tail(&head->lru, pagelist);
 			mod_node_page_state(page_pgdat(head),
-				NR_ISOLATED_ANON + page_is_file_cache(head),
+				NR_ISOLATED_ANON + page_is_file_lru(head),
 				hpage_nr_pages(head));
 		} else if (flags & MPOL_MF_STRICT) {
 			/*
@@ -2066,7 +2094,6 @@ bool init_nodemask_of_mempolicy(nodemask_t *mask)
 		break;
 
 	case MPOL_BIND:
-		/* Fall through */
 	case MPOL_INTERLEAVE:
 		*mask =  mempolicy->v.nodes;
 		break;
@@ -2333,7 +2360,6 @@ bool __mpol_equal(struct mempolicy *a, struct mempolicy *b)
 
 	switch (a->mode) {
 	case MPOL_BIND:
-		/* Fall through */
 	case MPOL_INTERLEAVE:
 		return !!nodes_equal(a->v.nodes, b->v.nodes);
 	case MPOL_PREFERRED:
diff --git a/mm/memremap.c b/mm/memremap.c
index 9b2c97c..03e38b7 100644
--- a/mm/memremap.c
+++ b/mm/memremap.c
@@ -7,6 +7,7 @@
 #include <linux/mm.h>
 #include <linux/pfn_t.h>
 #include <linux/swap.h>
+#include <linux/mmzone.h>
 #include <linux/swapops.h>
 #include <linux/types.h>
 #include <linux/wait_bit.h>
@@ -14,6 +15,28 @@
 
 static DEFINE_XARRAY(pgmap_array);
 
+/*
+ * The memremap() and memremap_pages() interfaces are alternately used
+ * to map persistent memory namespaces. These interfaces place different
+ * constraints on the alignment and size of the mapping (namespace).
+ * memremap() can map individual PAGE_SIZE pages. memremap_pages() can
+ * only map subsections (2MB), and at least one architecture (PowerPC)
+ * the minimum mapping granularity of memremap_pages() is 16MB.
+ *
+ * The role of memremap_compat_align() is to communicate the minimum
+ * arch supported alignment of a namespace such that it can freely
+ * switch modes without violating the arch constraint. Namely, do not
+ * allow a namespace to be PAGE_SIZE aligned since that namespace may be
+ * reconfigured into a mode that requires SUBSECTION_SIZE alignment.
+ */
+#ifndef CONFIG_ARCH_HAS_MEMREMAP_COMPAT_ALIGN
+unsigned long memremap_compat_align(void)
+{
+	return SUBSECTION_SIZE;
+}
+EXPORT_SYMBOL_GPL(memremap_compat_align);
+#endif
+
 #ifdef CONFIG_DEV_PAGEMAP_OPS
 DEFINE_STATIC_KEY_FALSE(devmap_managed_key);
 EXPORT_SYMBOL(devmap_managed_key);
@@ -161,13 +184,13 @@ void *memremap_pages(struct dev_pagemap *pgmap, int nid)
 {
 	struct resource *res = &pgmap->res;
 	struct dev_pagemap *conflict_pgmap;
-	struct mhp_restrictions restrictions = {
+	struct mhp_params params = {
 		/*
 		 * We do not want any optional features only our own memmap
 		 */
 		.altmap = pgmap_altmap(pgmap),
+		.pgprot = PAGE_KERNEL,
 	};
-	pgprot_t pgprot = PAGE_KERNEL;
 	int error, is_ram;
 	bool need_devmap_managed = true;
 
@@ -194,7 +217,10 @@ void *memremap_pages(struct dev_pagemap *pgmap, int nid)
 		}
 		break;
 	case MEMORY_DEVICE_DEVDAX:
+		need_devmap_managed = false;
+		break;
 	case MEMORY_DEVICE_PCI_P2PDMA:
+		params.pgprot = pgprot_noncached(params.pgprot);
 		need_devmap_managed = false;
 		break;
 	default:
@@ -259,8 +285,8 @@ void *memremap_pages(struct dev_pagemap *pgmap, int nid)
 	if (nid < 0)
 		nid = numa_mem_id();
 
-	error = track_pfn_remap(NULL, &pgprot, PHYS_PFN(res->start), 0,
-			resource_size(res));
+	error = track_pfn_remap(NULL, &params.pgprot, PHYS_PFN(res->start),
+				0, resource_size(res));
 	if (error)
 		goto err_pfn_remap;
 
@@ -279,7 +305,7 @@ void *memremap_pages(struct dev_pagemap *pgmap, int nid)
 	 */
 	if (pgmap->type == MEMORY_DEVICE_PRIVATE) {
 		error = add_pages(nid, PHYS_PFN(res->start),
-				PHYS_PFN(resource_size(res)), &restrictions);
+				PHYS_PFN(resource_size(res)), &params);
 	} else {
 		error = kasan_add_zero_shadow(__va(res->start), resource_size(res));
 		if (error) {
@@ -288,7 +314,7 @@ void *memremap_pages(struct dev_pagemap *pgmap, int nid)
 		}
 
 		error = arch_add_memory(nid, res->start, resource_size(res),
-					&restrictions);
+					&params);
 	}
 
 	if (!error) {
@@ -296,7 +322,7 @@ void *memremap_pages(struct dev_pagemap *pgmap, int nid)
 
 		zone = &NODE_DATA(nid)->node_zones[ZONE_DEVICE];
 		move_pfn_range_to_zone(zone, PHYS_PFN(res->start),
-				PHYS_PFN(resource_size(res)), restrictions.altmap);
+				PHYS_PFN(resource_size(res)), params.altmap);
 	}
 
 	mem_hotplug_done();
diff --git a/mm/migrate.c b/mm/migrate.c
index 7ded070..7160c15 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -193,7 +193,7 @@ void putback_movable_pages(struct list_head *l)
 			put_page(page);
 		} else {
 			mod_node_page_state(page_pgdat(page), NR_ISOLATED_ANON +
-					page_is_file_cache(page), -hpage_nr_pages(page));
+					page_is_file_lru(page), -hpage_nr_pages(page));
 			putback_lru_page(page);
 		}
 	}
@@ -243,11 +243,15 @@ static bool remove_migration_pte(struct page *page, struct vm_area_struct *vma,
 		entry = pte_to_swp_entry(*pvmw.pte);
 		if (is_write_migration_entry(entry))
 			pte = maybe_mkwrite(pte, vma);
+		else if (pte_swp_uffd_wp(*pvmw.pte))
+			pte = pte_mkuffd_wp(pte);
 
 		if (unlikely(is_zone_device_page(new))) {
 			if (is_device_private_page(new)) {
 				entry = make_device_private_entry(new, pte_write(pte));
 				pte = swp_entry_to_pte(entry);
+				if (pte_swp_uffd_wp(*pvmw.pte))
+					pte = pte_mkuffd_wp(pte);
 			}
 		}
 
@@ -647,6 +651,14 @@ void migrate_page_states(struct page *newpage, struct page *page)
 	if (PageWriteback(newpage))
 		end_page_writeback(newpage);
 
+	/*
+	 * PG_readahead shares the same bit with PG_reclaim.  The above
+	 * end_page_writeback() may clear PG_readahead mistakenly, so set the
+	 * bit after that.
+	 */
+	if (PageReadahead(page))
+		SetPageReadahead(newpage);
+
 	copy_page_owner(page, newpage);
 
 	mem_cgroup_migrate(page, newpage);
@@ -1211,7 +1223,7 @@ static ICE_noinline int unmap_and_move(new_page_t get_new_page,
 		 */
 		if (likely(!__PageMovable(page)))
 			mod_node_page_state(page_pgdat(page), NR_ISOLATED_ANON +
-					page_is_file_cache(page), -hpage_nr_pages(page));
+					page_is_file_lru(page), -hpage_nr_pages(page));
 	}
 
 	/*
@@ -1518,9 +1530,6 @@ static int do_move_pages_to_node(struct mm_struct *mm,
 {
 	int err;
 
-	if (list_empty(pagelist))
-		return 0;
-
 	err = migrate_pages(pagelist, alloc_new_node_page, NULL, node,
 			MIGRATE_SYNC, MR_SYSCALL);
 	if (err)
@@ -1587,7 +1596,7 @@ static int add_page_for_migration(struct mm_struct *mm, unsigned long addr,
 		err = 1;
 		list_add_tail(&head->lru, pagelist);
 		mod_node_page_state(page_pgdat(head),
-			NR_ISOLATED_ANON + page_is_file_cache(head),
+			NR_ISOLATED_ANON + page_is_file_lru(head),
 			hpage_nr_pages(head));
 	}
 out_putpage:
@@ -1602,6 +1611,32 @@ static int add_page_for_migration(struct mm_struct *mm, unsigned long addr,
 	return err;
 }
 
+static int move_pages_and_store_status(struct mm_struct *mm, int node,
+		struct list_head *pagelist, int __user *status,
+		int start, int i, unsigned long nr_pages)
+{
+	int err;
+
+	if (list_empty(pagelist))
+		return 0;
+
+	err = do_move_pages_to_node(mm, pagelist, node);
+	if (err) {
+		/*
+		 * Positive err means the number of failed
+		 * pages to migrate.  Since we are going to
+		 * abort and return the number of non-migrated
+		 * pages, so need to incude the rest of the
+		 * nr_pages that have not been attempted as
+		 * well.
+		 */
+		if (err > 0)
+			err += nr_pages - i - 1;
+		return err;
+	}
+	return store_status(status, start, node, i - start);
+}
+
 /*
  * Migrate an array of page address onto an array of nodes and fill
  * the corresponding array of status.
@@ -1645,21 +1680,8 @@ static int do_pages_move(struct mm_struct *mm, nodemask_t task_nodes,
 			current_node = node;
 			start = i;
 		} else if (node != current_node) {
-			err = do_move_pages_to_node(mm, &pagelist, current_node);
-			if (err) {
-				/*
-				 * Positive err means the number of failed
-				 * pages to migrate.  Since we are going to
-				 * abort and return the number of non-migrated
-				 * pages, so need to incude the rest of the
-				 * nr_pages that have not been attempted as
-				 * well.
-				 */
-				if (err > 0)
-					err += nr_pages - i - 1;
-				goto out;
-			}
-			err = store_status(status, start, current_node, i - start);
+			err = move_pages_and_store_status(mm, current_node,
+					&pagelist, status, start, i, nr_pages);
 			if (err)
 				goto out;
 			start = i;
@@ -1673,49 +1695,29 @@ static int do_pages_move(struct mm_struct *mm, nodemask_t task_nodes,
 		err = add_page_for_migration(mm, addr, current_node,
 				&pagelist, flags & MPOL_MF_MOVE_ALL);
 
-		if (!err) {
-			/* The page is already on the target node */
-			err = store_status(status, i, current_node, 1);
-			if (err)
-				goto out_flush;
-			continue;
-		} else if (err > 0) {
+		if (err > 0) {
 			/* The page is successfully queued for migration */
 			continue;
 		}
 
-		err = store_status(status, i, err, 1);
+		/*
+		 * If the page is already on the target node (!err), store the
+		 * node, otherwise, store the err.
+		 */
+		err = store_status(status, i, err ? : current_node, 1);
 		if (err)
 			goto out_flush;
 
-		err = do_move_pages_to_node(mm, &pagelist, current_node);
-		if (err) {
-			if (err > 0)
-				err += nr_pages - i - 1;
+		err = move_pages_and_store_status(mm, current_node, &pagelist,
+				status, start, i, nr_pages);
+		if (err)
 			goto out;
-		}
-		if (i > start) {
-			err = store_status(status, start, current_node, i - start);
-			if (err)
-				goto out;
-		}
 		current_node = NUMA_NO_NODE;
 	}
 out_flush:
-	if (list_empty(&pagelist))
-		return err;
-
 	/* Make sure we do not overwrite the existing error */
-	err1 = do_move_pages_to_node(mm, &pagelist, current_node);
-	/*
-	 * Don't have to report non-attempted pages here since:
-	 *     - If the above loop is done gracefully all pages have been
-	 *       attempted.
-	 *     - If the above loop is aborted it means a fatal error
-	 *       happened, should return ret.
-	 */
-	if (!err1)
-		err1 = store_status(status, start, current_node, i - start);
+	err1 = move_pages_and_store_status(mm, current_node, &pagelist,
+				status, start, i, nr_pages);
 	if (err >= 0)
 		err = err1;
 out:
@@ -1957,7 +1959,7 @@ static int numamigrate_isolate_page(pg_data_t *pgdat, struct page *page)
 		return 0;
 	}
 
-	page_lru = page_is_file_cache(page);
+	page_lru = page_is_file_lru(page);
 	mod_node_page_state(page_pgdat(page), NR_ISOLATED_ANON + page_lru,
 				hpage_nr_pages(page));
 
@@ -1993,7 +1995,7 @@ int migrate_misplaced_page(struct page *page, struct vm_area_struct *vma,
 	 * Don't migrate file pages that are mapped in multiple processes
 	 * with execute permissions as they are probably shared libraries.
 	 */
-	if (page_mapcount(page) != 1 && page_is_file_cache(page) &&
+	if (page_mapcount(page) != 1 && page_is_file_lru(page) &&
 	    (vma->vm_flags & VM_EXEC))
 		goto out;
 
@@ -2001,7 +2003,7 @@ int migrate_misplaced_page(struct page *page, struct vm_area_struct *vma,
 	 * Also do not migrate dirty pages as not all filesystems can move
 	 * dirty pages in MIGRATE_ASYNC mode which is a waste of cycles.
 	 */
-	if (page_is_file_cache(page) && PageDirty(page))
+	if (page_is_file_lru(page) && PageDirty(page))
 		goto out;
 
 	isolated = numamigrate_isolate_page(pgdat, page);
@@ -2016,7 +2018,7 @@ int migrate_misplaced_page(struct page *page, struct vm_area_struct *vma,
 		if (!list_empty(&migratepages)) {
 			list_del(&page->lru);
 			dec_node_page_state(page, NR_ISOLATED_ANON +
-					page_is_file_cache(page));
+					page_is_file_lru(page));
 			putback_lru_page(page);
 		}
 		isolated = 0;
@@ -2046,7 +2048,7 @@ int migrate_misplaced_transhuge_page(struct mm_struct *mm,
 	pg_data_t *pgdat = NODE_DATA(node);
 	int isolated = 0;
 	struct page *new_page = NULL;
-	int page_lru = page_is_file_cache(page);
+	int page_lru = page_is_file_lru(page);
 	unsigned long start = address & HPAGE_PMD_MASK;
 
 	new_page = alloc_pages_node(node,
@@ -2340,6 +2342,8 @@ static int migrate_vma_collect_pmd(pmd_t *pmdp,
 			swp_pte = swp_entry_to_pte(entry);
 			if (pte_soft_dirty(pte))
 				swp_pte = pte_swp_mksoft_dirty(swp_pte);
+			if (pte_uffd_wp(pte))
+				swp_pte = pte_swp_mkuffd_wp(swp_pte);
 			set_pte_at(mm, addr, ptep, swp_pte);
 
 			/*
diff --git a/mm/mm_init.c b/mm/mm_init.c
index 5c91838..7da6991 100644
--- a/mm/mm_init.c
+++ b/mm/mm_init.c
@@ -37,7 +37,7 @@ void __init mminit_verify_zonelist(void)
 		struct zonelist *zonelist;
 		int i, listid, zoneid;
 
-		BUG_ON(MAX_ZONELISTS > 2);
+		BUILD_BUG_ON(MAX_ZONELISTS > 2);
 		for (i = 0; i < MAX_ZONELISTS * MAX_NR_ZONES; i++) {
 
 			/* Identify the zone and nodelist */
diff --git a/mm/mmap.c b/mm/mmap.c
index 94ae183..f609e9e 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -1224,7 +1224,7 @@ static int anon_vma_compatible(struct vm_area_struct *a, struct vm_area_struct *
 	return a->vm_end == b->vm_start &&
 		mpol_equal(vma_policy(a), vma_policy(b)) &&
 		a->vm_file == b->vm_file &&
-		!((a->vm_flags ^ b->vm_flags) & ~(VM_READ|VM_WRITE|VM_EXEC|VM_SOFTDIRTY)) &&
+		!((a->vm_flags ^ b->vm_flags) & ~(VM_ACCESS_FLAGS | VM_SOFTDIRTY)) &&
 		b->vm_pgoff == a->vm_pgoff + ((b->vm_start - a->vm_start) >> PAGE_SHIFT);
 }
 
@@ -1460,7 +1460,7 @@ unsigned long do_mmap(struct file *file, unsigned long addr,
 			 * with MAP_SHARED to preserve backward compatibility.
 			 */
 			flags &= LEGACY_MAP_MASK;
-			/* fall through */
+			fallthrough;
 		case MAP_SHARED_VALIDATE:
 			if (flags & ~flags_mask)
 				return -EOPNOTSUPP;
@@ -1487,8 +1487,7 @@ unsigned long do_mmap(struct file *file, unsigned long addr,
 			vm_flags |= VM_SHARED | VM_MAYSHARE;
 			if (!(file->f_mode & FMODE_WRITE))
 				vm_flags &= ~(VM_MAYWRITE | VM_SHARED);
-
-			/* fall through */
+			fallthrough;
 		case MAP_PRIVATE:
 			if (!(file->f_mode & FMODE_READ))
 				return -EACCES;
@@ -2124,6 +2123,7 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
 	info.low_limit = mm->mmap_base;
 	info.high_limit = mmap_end;
 	info.align_mask = 0;
+	info.align_offset = 0;
 	return vm_unmapped_area(&info);
 }
 #endif
@@ -2165,6 +2165,7 @@ arch_get_unmapped_area_topdown(struct file *filp, unsigned long addr,
 	info.low_limit = max(PAGE_SIZE, mmap_min_addr);
 	info.high_limit = arch_get_mmap_base(addr, mm->mmap_base);
 	info.align_mask = 0;
+	info.align_offset = 0;
 	addr = vm_unmapped_area(&info);
 
 	/*
@@ -2358,8 +2359,7 @@ int expand_upwards(struct vm_area_struct *vma, unsigned long address)
 		gap_addr = TASK_SIZE;
 
 	next = vma->vm_next;
-	if (next && next->vm_start < gap_addr &&
-			(next->vm_flags & (VM_WRITE|VM_READ|VM_EXEC))) {
+	if (next && next->vm_start < gap_addr && vma_is_accessible(next)) {
 		if (!(next->vm_flags & VM_GROWSUP))
 			return -ENOMEM;
 		/* Check that both stack segments have the same anon_vma? */
@@ -2440,7 +2440,7 @@ int expand_downwards(struct vm_area_struct *vma,
 	prev = vma->vm_prev;
 	/* Check that both stack segments have the same anon_vma? */
 	if (prev && !(prev->vm_flags & VM_GROWSDOWN) &&
-			(prev->vm_flags & (VM_WRITE|VM_READ|VM_EXEC))) {
+			vma_is_accessible(prev)) {
 		if (address - prev->vm_end < stack_guard_gap)
 			return -ENOMEM;
 	}
diff --git a/mm/mprotect.c b/mm/mprotect.c
index 311c0da..494192ca 100644
--- a/mm/mprotect.c
+++ b/mm/mprotect.c
@@ -37,12 +37,16 @@
 
 static unsigned long change_pte_range(struct vm_area_struct *vma, pmd_t *pmd,
 		unsigned long addr, unsigned long end, pgprot_t newprot,
-		int dirty_accountable, int prot_numa)
+		unsigned long cp_flags)
 {
 	pte_t *pte, oldpte;
 	spinlock_t *ptl;
 	unsigned long pages = 0;
 	int target_node = NUMA_NO_NODE;
+	bool dirty_accountable = cp_flags & MM_CP_DIRTY_ACCT;
+	bool prot_numa = cp_flags & MM_CP_PROT_NUMA;
+	bool uffd_wp = cp_flags & MM_CP_UFFD_WP;
+	bool uffd_wp_resolve = cp_flags & MM_CP_UFFD_WP_RESOLVE;
 
 	/*
 	 * Can be called with only the mmap_sem for reading by
@@ -98,7 +102,7 @@ static unsigned long change_pte_range(struct vm_area_struct *vma, pmd_t *pmd,
 				 * it cannot move them all from MIGRATE_ASYNC
 				 * context.
 				 */
-				if (page_is_file_cache(page) && PageDirty(page))
+				if (page_is_file_lru(page) && PageDirty(page))
 					continue;
 
 				/*
@@ -114,6 +118,19 @@ static unsigned long change_pte_range(struct vm_area_struct *vma, pmd_t *pmd,
 			if (preserve_write)
 				ptent = pte_mk_savedwrite(ptent);
 
+			if (uffd_wp) {
+				ptent = pte_wrprotect(ptent);
+				ptent = pte_mkuffd_wp(ptent);
+			} else if (uffd_wp_resolve) {
+				/*
+				 * Leave the write bit to be handled
+				 * by PF interrupt handler, then
+				 * things like COW could be properly
+				 * handled.
+				 */
+				ptent = pte_clear_uffd_wp(ptent);
+			}
+
 			/* Avoid taking write faults for known dirty pages */
 			if (dirty_accountable && pte_dirty(ptent) &&
 					(pte_soft_dirty(ptent) ||
@@ -122,11 +139,11 @@ static unsigned long change_pte_range(struct vm_area_struct *vma, pmd_t *pmd,
 			}
 			ptep_modify_prot_commit(vma, addr, pte, oldpte, ptent);
 			pages++;
-		} else if (IS_ENABLED(CONFIG_MIGRATION)) {
+		} else if (is_swap_pte(oldpte)) {
 			swp_entry_t entry = pte_to_swp_entry(oldpte);
+			pte_t newpte;
 
 			if (is_write_migration_entry(entry)) {
-				pte_t newpte;
 				/*
 				 * A protection check is difficult so
 				 * just be safe and disable write
@@ -135,22 +152,28 @@ static unsigned long change_pte_range(struct vm_area_struct *vma, pmd_t *pmd,
 				newpte = swp_entry_to_pte(entry);
 				if (pte_swp_soft_dirty(oldpte))
 					newpte = pte_swp_mksoft_dirty(newpte);
-				set_pte_at(vma->vm_mm, addr, pte, newpte);
-
-				pages++;
-			}
-
-			if (is_write_device_private_entry(entry)) {
-				pte_t newpte;
-
+				if (pte_swp_uffd_wp(oldpte))
+					newpte = pte_swp_mkuffd_wp(newpte);
+			} else if (is_write_device_private_entry(entry)) {
 				/*
 				 * We do not preserve soft-dirtiness. See
 				 * copy_one_pte() for explanation.
 				 */
 				make_device_private_entry_read(&entry);
 				newpte = swp_entry_to_pte(entry);
-				set_pte_at(vma->vm_mm, addr, pte, newpte);
+				if (pte_swp_uffd_wp(oldpte))
+					newpte = pte_swp_mkuffd_wp(newpte);
+			} else {
+				newpte = oldpte;
+			}
 
+			if (uffd_wp)
+				newpte = pte_swp_mkuffd_wp(newpte);
+			else if (uffd_wp_resolve)
+				newpte = pte_swp_clear_uffd_wp(newpte);
+
+			if (!pte_same(oldpte, newpte)) {
+				set_pte_at(vma->vm_mm, addr, pte, newpte);
 				pages++;
 			}
 		}
@@ -188,7 +211,7 @@ static inline int pmd_none_or_clear_bad_unless_trans_huge(pmd_t *pmd)
 
 static inline unsigned long change_pmd_range(struct vm_area_struct *vma,
 		pud_t *pud, unsigned long addr, unsigned long end,
-		pgprot_t newprot, int dirty_accountable, int prot_numa)
+		pgprot_t newprot, unsigned long cp_flags)
 {
 	pmd_t *pmd;
 	unsigned long next;
@@ -229,7 +252,7 @@ static inline unsigned long change_pmd_range(struct vm_area_struct *vma,
 				__split_huge_pmd(vma, pmd, addr, false, NULL);
 			} else {
 				int nr_ptes = change_huge_pmd(vma, pmd, addr,
-						newprot, prot_numa);
+							      newprot, cp_flags);
 
 				if (nr_ptes) {
 					if (nr_ptes == HPAGE_PMD_NR) {
@@ -244,7 +267,7 @@ static inline unsigned long change_pmd_range(struct vm_area_struct *vma,
 			/* fall through, the trans huge pmd just split */
 		}
 		this_pages = change_pte_range(vma, pmd, addr, next, newprot,
-				 dirty_accountable, prot_numa);
+					      cp_flags);
 		pages += this_pages;
 next:
 		cond_resched();
@@ -260,7 +283,7 @@ static inline unsigned long change_pmd_range(struct vm_area_struct *vma,
 
 static inline unsigned long change_pud_range(struct vm_area_struct *vma,
 		p4d_t *p4d, unsigned long addr, unsigned long end,
-		pgprot_t newprot, int dirty_accountable, int prot_numa)
+		pgprot_t newprot, unsigned long cp_flags)
 {
 	pud_t *pud;
 	unsigned long next;
@@ -272,7 +295,7 @@ static inline unsigned long change_pud_range(struct vm_area_struct *vma,
 		if (pud_none_or_clear_bad(pud))
 			continue;
 		pages += change_pmd_range(vma, pud, addr, next, newprot,
-				 dirty_accountable, prot_numa);
+					  cp_flags);
 	} while (pud++, addr = next, addr != end);
 
 	return pages;
@@ -280,7 +303,7 @@ static inline unsigned long change_pud_range(struct vm_area_struct *vma,
 
 static inline unsigned long change_p4d_range(struct vm_area_struct *vma,
 		pgd_t *pgd, unsigned long addr, unsigned long end,
-		pgprot_t newprot, int dirty_accountable, int prot_numa)
+		pgprot_t newprot, unsigned long cp_flags)
 {
 	p4d_t *p4d;
 	unsigned long next;
@@ -292,7 +315,7 @@ static inline unsigned long change_p4d_range(struct vm_area_struct *vma,
 		if (p4d_none_or_clear_bad(p4d))
 			continue;
 		pages += change_pud_range(vma, p4d, addr, next, newprot,
-				 dirty_accountable, prot_numa);
+					  cp_flags);
 	} while (p4d++, addr = next, addr != end);
 
 	return pages;
@@ -300,7 +323,7 @@ static inline unsigned long change_p4d_range(struct vm_area_struct *vma,
 
 static unsigned long change_protection_range(struct vm_area_struct *vma,
 		unsigned long addr, unsigned long end, pgprot_t newprot,
-		int dirty_accountable, int prot_numa)
+		unsigned long cp_flags)
 {
 	struct mm_struct *mm = vma->vm_mm;
 	pgd_t *pgd;
@@ -317,7 +340,7 @@ static unsigned long change_protection_range(struct vm_area_struct *vma,
 		if (pgd_none_or_clear_bad(pgd))
 			continue;
 		pages += change_p4d_range(vma, pgd, addr, next, newprot,
-				 dirty_accountable, prot_numa);
+					  cp_flags);
 	} while (pgd++, addr = next, addr != end);
 
 	/* Only flush the TLB if we actually modified any entries: */
@@ -330,14 +353,17 @@ static unsigned long change_protection_range(struct vm_area_struct *vma,
 
 unsigned long change_protection(struct vm_area_struct *vma, unsigned long start,
 		       unsigned long end, pgprot_t newprot,
-		       int dirty_accountable, int prot_numa)
+		       unsigned long cp_flags)
 {
 	unsigned long pages;
 
+	BUG_ON((cp_flags & MM_CP_UFFD_WP_ALL) == MM_CP_UFFD_WP_ALL);
+
 	if (is_vm_hugetlb_page(vma))
 		pages = hugetlb_change_protection(vma, start, end, newprot);
 	else
-		pages = change_protection_range(vma, start, end, newprot, dirty_accountable, prot_numa);
+		pages = change_protection_range(vma, start, end, newprot,
+						cp_flags);
 
 	return pages;
 }
@@ -393,7 +419,7 @@ mprotect_fixup(struct vm_area_struct *vma, struct vm_area_struct **pprev,
 	 */
 	if (arch_has_pfn_modify_check() &&
 	    (vma->vm_flags & (VM_PFNMAP|VM_MIXEDMAP)) &&
-	    (newflags & (VM_READ|VM_WRITE|VM_EXEC)) == 0) {
+	    (newflags & VM_ACCESS_FLAGS) == 0) {
 		pgprot_t new_pgprot = vm_get_page_prot(newflags);
 
 		error = walk_page_range(current->mm, start, end,
@@ -459,7 +485,7 @@ mprotect_fixup(struct vm_area_struct *vma, struct vm_area_struct **pprev,
 	vma_set_page_prot(vma);
 
 	change_protection(vma, start, end, vma->vm_page_prot,
-			  dirty_accountable, 0);
+			  dirty_accountable ? MM_CP_DIRTY_ACCT : 0);
 
 	/*
 	 * Private VM_LOCKED VMA becoming writable: trigger COW to avoid major
@@ -572,7 +598,7 @@ static int do_mprotect_pkey(unsigned long start, size_t len,
 		newflags |= (vma->vm_flags & ~mask_off_old_flags);
 
 		/* newflags >> 4 shift VM_MAY% in place of VM_% */
-		if ((newflags & ~(newflags >> 4)) & (VM_READ | VM_WRITE | VM_EXEC)) {
+		if ((newflags & ~(newflags >> 4)) & VM_ACCESS_FLAGS) {
 			error = -EACCES;
 			goto out;
 		}
diff --git a/mm/mremap.c b/mm/mremap.c
index a7e282e..c881abe 100644
--- a/mm/mremap.c
+++ b/mm/mremap.c
@@ -413,9 +413,20 @@ static unsigned long move_vma(struct vm_area_struct *vma,
 			/* Always put back VM_ACCOUNT since we won't unmap */
 			vma->vm_flags |= VM_ACCOUNT;
 
-			vm_acct_memory(vma_pages(new_vma));
+			vm_acct_memory(new_len >> PAGE_SHIFT);
 		}
 
+		/*
+		 * VMAs can actually be merged back together in copy_vma
+		 * calling merge_vma. This can happen with anonymous vmas
+		 * which have not yet been faulted, so if we were to consider
+		 * this VMA split we'll end up adding VM_ACCOUNT on the
+		 * next VMA, which is completely unrelated if this VMA
+		 * was re-merged.
+		 */
+		if (split && new_vma == vma)
+			split = 0;
+
 		/* We always clear VM_LOCKED[ONFAULT] on the old vma */
 		vma->vm_flags &= VM_LOCKED_CLEAR_MASK;
 
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index e5f76da..69827d4 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -74,6 +74,7 @@
 #include <asm/div64.h>
 #include "internal.h"
 #include "shuffle.h"
+#include "page_reporting.h"
 
 /* prevent >1 _updater_ of zone percpu pageset ->high and ->batch fields */
 static DEFINE_MUTEX(pcp_batch_high_lock);
@@ -102,8 +103,8 @@ struct pcpu_drain {
 	struct zone *zone;
 	struct work_struct work;
 };
-DEFINE_MUTEX(pcpu_drain_mutex);
-DEFINE_PER_CPU(struct pcpu_drain, pcpu_drain);
+static DEFINE_MUTEX(pcpu_drain_mutex);
+static DEFINE_PER_CPU(struct pcpu_drain, pcpu_drain);
 
 #ifdef CONFIG_GCC_PLUGIN_LATENT_ENTROPY
 volatile unsigned long latent_entropy __latent_entropy;
@@ -864,6 +865,78 @@ compaction_capture(struct capture_control *capc, struct page *page,
 }
 #endif /* CONFIG_COMPACTION */
 
+/* Used for pages not on another list */
+static inline void add_to_free_list(struct page *page, struct zone *zone,
+				    unsigned int order, int migratetype)
+{
+	struct free_area *area = &zone->free_area[order];
+
+	list_add(&page->lru, &area->free_list[migratetype]);
+	area->nr_free++;
+}
+
+/* Used for pages not on another list */
+static inline void add_to_free_list_tail(struct page *page, struct zone *zone,
+					 unsigned int order, int migratetype)
+{
+	struct free_area *area = &zone->free_area[order];
+
+	list_add_tail(&page->lru, &area->free_list[migratetype]);
+	area->nr_free++;
+}
+
+/* Used for pages which are on another list */
+static inline void move_to_free_list(struct page *page, struct zone *zone,
+				     unsigned int order, int migratetype)
+{
+	struct free_area *area = &zone->free_area[order];
+
+	list_move(&page->lru, &area->free_list[migratetype]);
+}
+
+static inline void del_page_from_free_list(struct page *page, struct zone *zone,
+					   unsigned int order)
+{
+	/* clear reported state and update reported page count */
+	if (page_reported(page))
+		__ClearPageReported(page);
+
+	list_del(&page->lru);
+	__ClearPageBuddy(page);
+	set_page_private(page, 0);
+	zone->free_area[order].nr_free--;
+}
+
+/*
+ * If this is not the largest possible page, check if the buddy
+ * of the next-highest order is free. If it is, it's possible
+ * that pages are being freed that will coalesce soon. In case,
+ * that is happening, add the free page to the tail of the list
+ * so it's less likely to be used soon and more likely to be merged
+ * as a higher order page
+ */
+static inline bool
+buddy_merge_likely(unsigned long pfn, unsigned long buddy_pfn,
+		   struct page *page, unsigned int order)
+{
+	struct page *higher_page, *higher_buddy;
+	unsigned long combined_pfn;
+
+	if (order >= MAX_ORDER - 2)
+		return false;
+
+	if (!pfn_valid_within(buddy_pfn))
+		return false;
+
+	combined_pfn = buddy_pfn & pfn;
+	higher_page = page + (combined_pfn - pfn);
+	buddy_pfn = __find_buddy_pfn(combined_pfn, order + 1);
+	higher_buddy = higher_page + (buddy_pfn - combined_pfn);
+
+	return pfn_valid_within(buddy_pfn) &&
+	       page_is_buddy(higher_page, higher_buddy, order + 1);
+}
+
 /*
  * Freeing function for a buddy system allocator.
  *
@@ -891,13 +964,14 @@ compaction_capture(struct capture_control *capc, struct page *page,
 static inline void __free_one_page(struct page *page,
 		unsigned long pfn,
 		struct zone *zone, unsigned int order,
-		int migratetype)
+		int migratetype, bool report)
 {
-	unsigned long combined_pfn;
-	unsigned long uninitialized_var(buddy_pfn);
-	struct page *buddy;
-	unsigned int max_order;
 	struct capture_control *capc = task_capc(zone);
+	unsigned long uninitialized_var(buddy_pfn);
+	unsigned long combined_pfn;
+	unsigned int max_order;
+	struct page *buddy;
+	bool to_tail;
 
 	max_order = min_t(unsigned int, MAX_ORDER, pageblock_order + 1);
 
@@ -932,7 +1006,7 @@ static inline void __free_one_page(struct page *page,
 		if (page_is_guard(buddy))
 			clear_page_guard(zone, buddy, order, migratetype);
 		else
-			del_page_from_free_area(buddy, &zone->free_area[order]);
+			del_page_from_free_list(buddy, zone, order);
 		combined_pfn = buddy_pfn & pfn;
 		page = page + (combined_pfn - pfn);
 		pfn = combined_pfn;
@@ -966,35 +1040,19 @@ static inline void __free_one_page(struct page *page,
 done_merging:
 	set_page_order(page, order);
 
-	/*
-	 * If this is not the largest possible page, check if the buddy
-	 * of the next-highest order is free. If it is, it's possible
-	 * that pages are being freed that will coalesce soon. In case,
-	 * that is happening, add the free page to the tail of the list
-	 * so it's less likely to be used soon and more likely to be merged
-	 * as a higher order page
-	 */
-	if ((order < MAX_ORDER-2) && pfn_valid_within(buddy_pfn)
-			&& !is_shuffle_order(order)) {
-		struct page *higher_page, *higher_buddy;
-		combined_pfn = buddy_pfn & pfn;
-		higher_page = page + (combined_pfn - pfn);
-		buddy_pfn = __find_buddy_pfn(combined_pfn, order + 1);
-		higher_buddy = higher_page + (buddy_pfn - combined_pfn);
-		if (pfn_valid_within(buddy_pfn) &&
-		    page_is_buddy(higher_page, higher_buddy, order + 1)) {
-			add_to_free_area_tail(page, &zone->free_area[order],
-					      migratetype);
-			return;
-		}
-	}
-
 	if (is_shuffle_order(order))
-		add_to_free_area_random(page, &zone->free_area[order],
-				migratetype);
+		to_tail = shuffle_pick_tail();
 	else
-		add_to_free_area(page, &zone->free_area[order], migratetype);
+		to_tail = buddy_merge_likely(pfn, buddy_pfn, page, order);
 
+	if (to_tail)
+		add_to_free_list_tail(page, zone, order, migratetype);
+	else
+		add_to_free_list(page, zone, order, migratetype);
+
+	/* Notify page reporting subsystem of freed page */
+	if (report)
+		page_reporting_notify_free(order);
 }
 
 /*
@@ -1311,7 +1369,7 @@ static void free_pcppages_bulk(struct zone *zone, int count,
 		if (unlikely(isolated_pageblocks))
 			mt = get_pageblock_migratetype(page);
 
-		__free_one_page(page, page_to_pfn(page), zone, 0, mt);
+		__free_one_page(page, page_to_pfn(page), zone, 0, mt, true);
 		trace_mm_page_pcpu_drain(page, 0, mt);
 	}
 	spin_unlock(&zone->lock);
@@ -1327,7 +1385,7 @@ static void free_one_page(struct zone *zone,
 		is_migrate_isolate(migratetype))) {
 		migratetype = get_pfnblock_migratetype(page, pfn);
 	}
-	__free_one_page(page, pfn, zone, order, migratetype);
+	__free_one_page(page, pfn, zone, order, migratetype, true);
 	spin_unlock(&zone->lock);
 }
 
@@ -2008,13 +2066,11 @@ void __init init_cma_reserved_pageblock(struct page *page)
  * -- nyc
  */
 static inline void expand(struct zone *zone, struct page *page,
-	int low, int high, struct free_area *area,
-	int migratetype)
+	int low, int high, int migratetype)
 {
 	unsigned long size = 1 << high;
 
 	while (high > low) {
-		area--;
 		high--;
 		size >>= 1;
 		VM_BUG_ON_PAGE(bad_range(zone, &page[size]), &page[size]);
@@ -2028,7 +2084,7 @@ static inline void expand(struct zone *zone, struct page *page,
 		if (set_page_guard(zone, &page[size], high, migratetype))
 			continue;
 
-		add_to_free_area(&page[size], area, migratetype);
+		add_to_free_list(&page[size], zone, high, migratetype);
 		set_page_order(&page[size], high);
 	}
 }
@@ -2186,8 +2242,8 @@ struct page *__rmqueue_smallest(struct zone *zone, unsigned int order,
 		page = get_page_from_free_area(area, migratetype);
 		if (!page)
 			continue;
-		del_page_from_free_area(page, area);
-		expand(zone, page, order, current_order, area, migratetype);
+		del_page_from_free_list(page, zone, current_order);
+		expand(zone, page, order, current_order, migratetype);
 		set_pcppage_migratetype(page, migratetype);
 		return page;
 	}
@@ -2261,7 +2317,7 @@ static int move_freepages(struct zone *zone,
 		VM_BUG_ON_PAGE(page_zone(page) != zone, page);
 
 		order = page_order(page);
-		move_to_free_area(page, &zone->free_area[order], migratetype);
+		move_to_free_list(page, zone, order, migratetype);
 		page += 1 << order;
 		pages_moved += 1 << order;
 	}
@@ -2377,7 +2433,6 @@ static void steal_suitable_fallback(struct zone *zone, struct page *page,
 		unsigned int alloc_flags, int start_type, bool whole_block)
 {
 	unsigned int current_order = page_order(page);
-	struct free_area *area;
 	int free_pages, movable_pages, alike_pages;
 	int old_block_type;
 
@@ -2448,8 +2503,7 @@ static void steal_suitable_fallback(struct zone *zone, struct page *page,
 	return;
 
 single_page:
-	area = &zone->free_area[current_order];
-	move_to_free_area(page, area, start_type);
+	move_to_free_list(page, zone, current_order, start_type);
 }
 
 /*
@@ -3120,7 +3174,6 @@ EXPORT_SYMBOL_GPL(split_page);
 
 int __isolate_free_page(struct page *page, unsigned int order)
 {
-	struct free_area *area = &page_zone(page)->free_area[order];
 	unsigned long watermark;
 	struct zone *zone;
 	int mt;
@@ -3146,7 +3199,7 @@ int __isolate_free_page(struct page *page, unsigned int order)
 
 	/* Remove page from free list */
 
-	del_page_from_free_area(page, area);
+	del_page_from_free_list(page, zone, order);
 
 	/*
 	 * Set the pageblock if the isolated page is at least half of a
@@ -3167,6 +3220,26 @@ int __isolate_free_page(struct page *page, unsigned int order)
 	return 1UL << order;
 }
 
+/**
+ * __putback_isolated_page - Return a now-isolated page back where we got it
+ * @page: Page that was isolated
+ * @order: Order of the isolated page
+ * @mt: The page's pageblock's migratetype
+ *
+ * This function is meant to return a page pulled from the free lists via
+ * __isolate_free_page back to the free lists they were pulled from.
+ */
+void __putback_isolated_page(struct page *page, unsigned int order, int mt)
+{
+	struct zone *zone = page_zone(page);
+
+	/* zone lock should be held when this function is called */
+	lockdep_assert_held(&zone->lock);
+
+	/* Return isolated page to tail of freelist. */
+	__free_one_page(page, page_to_pfn(page), zone, order, mt, false);
+}
+
 /*
  * Update NUMA hit/miss statistics
  *
@@ -8713,7 +8786,7 @@ __offline_isolated_pages(unsigned long start_pfn, unsigned long end_pfn)
 		BUG_ON(!PageBuddy(page));
 		order = page_order(page);
 		offlined_pages += 1 << order;
-		del_page_from_free_area(page, &zone->free_area[order]);
+		del_page_from_free_list(page, zone, order);
 		pfn += (1 << order);
 	}
 	spin_unlock_irqrestore(&zone->lock, flags);
diff --git a/mm/page_ext.c b/mm/page_ext.c
index 08ded03..a3616f7 100644
--- a/mm/page_ext.c
+++ b/mm/page_ext.c
@@ -303,11 +303,8 @@ static int __meminit online_page_ext(unsigned long start_pfn,
 		VM_BUG_ON(!node_state(nid, N_ONLINE));
 	}
 
-	for (pfn = start; !fail && pfn < end; pfn += PAGES_PER_SECTION) {
-		if (!pfn_in_present_section(pfn))
-			continue;
+	for (pfn = start; !fail && pfn < end; pfn += PAGES_PER_SECTION)
 		fail = init_section_page_ext(pfn, nid);
-	}
 	if (!fail)
 		return 0;
 
diff --git a/mm/page_isolation.c b/mm/page_isolation.c
index a9fd7c7..2c11a38 100644
--- a/mm/page_isolation.c
+++ b/mm/page_isolation.c
@@ -117,13 +117,11 @@ static void unset_migratetype_isolate(struct page *page, unsigned migratetype)
 		__mod_zone_freepage_state(zone, nr_pages, migratetype);
 	}
 	set_pageblock_migratetype(page, migratetype);
+	if (isolated_page)
+		__putback_isolated_page(page, order, migratetype);
 	zone->nr_isolate_pageblock--;
 out:
 	spin_unlock_irqrestore(&zone->lock, flags);
-	if (isolated_page) {
-		post_alloc_hook(page, order, __GFP_MOVABLE);
-		__free_pages(page, order);
-	}
 }
 
 static inline struct page *
diff --git a/mm/page_reporting.c b/mm/page_reporting.c
new file mode 100644
index 0000000..3bbd471
--- /dev/null
+++ b/mm/page_reporting.c
@@ -0,0 +1,364 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/mm.h>
+#include <linux/mmzone.h>
+#include <linux/page_reporting.h>
+#include <linux/gfp.h>
+#include <linux/export.h>
+#include <linux/delay.h>
+#include <linux/scatterlist.h>
+
+#include "page_reporting.h"
+#include "internal.h"
+
+#define PAGE_REPORTING_DELAY	(2 * HZ)
+static struct page_reporting_dev_info __rcu *pr_dev_info __read_mostly;
+
+enum {
+	PAGE_REPORTING_IDLE = 0,
+	PAGE_REPORTING_REQUESTED,
+	PAGE_REPORTING_ACTIVE
+};
+
+/* request page reporting */
+static void
+__page_reporting_request(struct page_reporting_dev_info *prdev)
+{
+	unsigned int state;
+
+	/* Check to see if we are in desired state */
+	state = atomic_read(&prdev->state);
+	if (state == PAGE_REPORTING_REQUESTED)
+		return;
+
+	/*
+	 *  If reporting is already active there is nothing we need to do.
+	 *  Test against 0 as that represents PAGE_REPORTING_IDLE.
+	 */
+	state = atomic_xchg(&prdev->state, PAGE_REPORTING_REQUESTED);
+	if (state != PAGE_REPORTING_IDLE)
+		return;
+
+	/*
+	 * Delay the start of work to allow a sizable queue to build. For
+	 * now we are limiting this to running no more than once every
+	 * couple of seconds.
+	 */
+	schedule_delayed_work(&prdev->work, PAGE_REPORTING_DELAY);
+}
+
+/* notify prdev of free page reporting request */
+void __page_reporting_notify(void)
+{
+	struct page_reporting_dev_info *prdev;
+
+	/*
+	 * We use RCU to protect the pr_dev_info pointer. In almost all
+	 * cases this should be present, however in the unlikely case of
+	 * a shutdown this will be NULL and we should exit.
+	 */
+	rcu_read_lock();
+	prdev = rcu_dereference(pr_dev_info);
+	if (likely(prdev))
+		__page_reporting_request(prdev);
+
+	rcu_read_unlock();
+}
+
+static void
+page_reporting_drain(struct page_reporting_dev_info *prdev,
+		     struct scatterlist *sgl, unsigned int nents, bool reported)
+{
+	struct scatterlist *sg = sgl;
+
+	/*
+	 * Drain the now reported pages back into their respective
+	 * free lists/areas. We assume at least one page is populated.
+	 */
+	do {
+		struct page *page = sg_page(sg);
+		int mt = get_pageblock_migratetype(page);
+		unsigned int order = get_order(sg->length);
+
+		__putback_isolated_page(page, order, mt);
+
+		/* If the pages were not reported due to error skip flagging */
+		if (!reported)
+			continue;
+
+		/*
+		 * If page was not comingled with another page we can
+		 * consider the result to be "reported" since the page
+		 * hasn't been modified, otherwise we will need to
+		 * report on the new larger page when we make our way
+		 * up to that higher order.
+		 */
+		if (PageBuddy(page) && page_order(page) == order)
+			__SetPageReported(page);
+	} while ((sg = sg_next(sg)));
+
+	/* reinitialize scatterlist now that it is empty */
+	sg_init_table(sgl, nents);
+}
+
+/*
+ * The page reporting cycle consists of 4 stages, fill, report, drain, and
+ * idle. We will cycle through the first 3 stages until we cannot obtain a
+ * full scatterlist of pages, in that case we will switch to idle.
+ */
+static int
+page_reporting_cycle(struct page_reporting_dev_info *prdev, struct zone *zone,
+		     unsigned int order, unsigned int mt,
+		     struct scatterlist *sgl, unsigned int *offset)
+{
+	struct free_area *area = &zone->free_area[order];
+	struct list_head *list = &area->free_list[mt];
+	unsigned int page_len = PAGE_SIZE << order;
+	struct page *page, *next;
+	long budget;
+	int err = 0;
+
+	/*
+	 * Perform early check, if free area is empty there is
+	 * nothing to process so we can skip this free_list.
+	 */
+	if (list_empty(list))
+		return err;
+
+	spin_lock_irq(&zone->lock);
+
+	/*
+	 * Limit how many calls we will be making to the page reporting
+	 * device for this list. By doing this we avoid processing any
+	 * given list for too long.
+	 *
+	 * The current value used allows us enough calls to process over a
+	 * sixteenth of the current list plus one additional call to handle
+	 * any pages that may have already been present from the previous
+	 * list processed. This should result in us reporting all pages on
+	 * an idle system in about 30 seconds.
+	 *
+	 * The division here should be cheap since PAGE_REPORTING_CAPACITY
+	 * should always be a power of 2.
+	 */
+	budget = DIV_ROUND_UP(area->nr_free, PAGE_REPORTING_CAPACITY * 16);
+
+	/* loop through free list adding unreported pages to sg list */
+	list_for_each_entry_safe(page, next, list, lru) {
+		/* We are going to skip over the reported pages. */
+		if (PageReported(page))
+			continue;
+
+		/*
+		 * If we fully consumed our budget then update our
+		 * state to indicate that we are requesting additional
+		 * processing and exit this list.
+		 */
+		if (budget < 0) {
+			atomic_set(&prdev->state, PAGE_REPORTING_REQUESTED);
+			next = page;
+			break;
+		}
+
+		/* Attempt to pull page from list and place in scatterlist */
+		if (*offset) {
+			if (!__isolate_free_page(page, order)) {
+				next = page;
+				break;
+			}
+
+			/* Add page to scatter list */
+			--(*offset);
+			sg_set_page(&sgl[*offset], page, page_len, 0);
+
+			continue;
+		}
+
+		/*
+		 * Make the first non-reported page in the free list
+		 * the new head of the free list before we release the
+		 * zone lock.
+		 */
+		if (&page->lru != list && !list_is_first(&page->lru, list))
+			list_rotate_to_front(&page->lru, list);
+
+		/* release lock before waiting on report processing */
+		spin_unlock_irq(&zone->lock);
+
+		/* begin processing pages in local list */
+		err = prdev->report(prdev, sgl, PAGE_REPORTING_CAPACITY);
+
+		/* reset offset since the full list was reported */
+		*offset = PAGE_REPORTING_CAPACITY;
+
+		/* update budget to reflect call to report function */
+		budget--;
+
+		/* reacquire zone lock and resume processing */
+		spin_lock_irq(&zone->lock);
+
+		/* flush reported pages from the sg list */
+		page_reporting_drain(prdev, sgl, PAGE_REPORTING_CAPACITY, !err);
+
+		/*
+		 * Reset next to first entry, the old next isn't valid
+		 * since we dropped the lock to report the pages
+		 */
+		next = list_first_entry(list, struct page, lru);
+
+		/* exit on error */
+		if (err)
+			break;
+	}
+
+	/* Rotate any leftover pages to the head of the freelist */
+	if (&next->lru != list && !list_is_first(&next->lru, list))
+		list_rotate_to_front(&next->lru, list);
+
+	spin_unlock_irq(&zone->lock);
+
+	return err;
+}
+
+static int
+page_reporting_process_zone(struct page_reporting_dev_info *prdev,
+			    struct scatterlist *sgl, struct zone *zone)
+{
+	unsigned int order, mt, leftover, offset = PAGE_REPORTING_CAPACITY;
+	unsigned long watermark;
+	int err = 0;
+
+	/* Generate minimum watermark to be able to guarantee progress */
+	watermark = low_wmark_pages(zone) +
+		    (PAGE_REPORTING_CAPACITY << PAGE_REPORTING_MIN_ORDER);
+
+	/*
+	 * Cancel request if insufficient free memory or if we failed
+	 * to allocate page reporting statistics for the zone.
+	 */
+	if (!zone_watermark_ok(zone, 0, watermark, 0, ALLOC_CMA))
+		return err;
+
+	/* Process each free list starting from lowest order/mt */
+	for (order = PAGE_REPORTING_MIN_ORDER; order < MAX_ORDER; order++) {
+		for (mt = 0; mt < MIGRATE_TYPES; mt++) {
+			/* We do not pull pages from the isolate free list */
+			if (is_migrate_isolate(mt))
+				continue;
+
+			err = page_reporting_cycle(prdev, zone, order, mt,
+						   sgl, &offset);
+			if (err)
+				return err;
+		}
+	}
+
+	/* report the leftover pages before going idle */
+	leftover = PAGE_REPORTING_CAPACITY - offset;
+	if (leftover) {
+		sgl = &sgl[offset];
+		err = prdev->report(prdev, sgl, leftover);
+
+		/* flush any remaining pages out from the last report */
+		spin_lock_irq(&zone->lock);
+		page_reporting_drain(prdev, sgl, leftover, !err);
+		spin_unlock_irq(&zone->lock);
+	}
+
+	return err;
+}
+
+static void page_reporting_process(struct work_struct *work)
+{
+	struct delayed_work *d_work = to_delayed_work(work);
+	struct page_reporting_dev_info *prdev =
+		container_of(d_work, struct page_reporting_dev_info, work);
+	int err = 0, state = PAGE_REPORTING_ACTIVE;
+	struct scatterlist *sgl;
+	struct zone *zone;
+
+	/*
+	 * Change the state to "Active" so that we can track if there is
+	 * anyone requests page reporting after we complete our pass. If
+	 * the state is not altered by the end of the pass we will switch
+	 * to idle and quit scheduling reporting runs.
+	 */
+	atomic_set(&prdev->state, state);
+
+	/* allocate scatterlist to store pages being reported on */
+	sgl = kmalloc_array(PAGE_REPORTING_CAPACITY, sizeof(*sgl), GFP_KERNEL);
+	if (!sgl)
+		goto err_out;
+
+	sg_init_table(sgl, PAGE_REPORTING_CAPACITY);
+
+	for_each_zone(zone) {
+		err = page_reporting_process_zone(prdev, sgl, zone);
+		if (err)
+			break;
+	}
+
+	kfree(sgl);
+err_out:
+	/*
+	 * If the state has reverted back to requested then there may be
+	 * additional pages to be processed. We will defer for 2s to allow
+	 * more pages to accumulate.
+	 */
+	state = atomic_cmpxchg(&prdev->state, state, PAGE_REPORTING_IDLE);
+	if (state == PAGE_REPORTING_REQUESTED)
+		schedule_delayed_work(&prdev->work, PAGE_REPORTING_DELAY);
+}
+
+static DEFINE_MUTEX(page_reporting_mutex);
+DEFINE_STATIC_KEY_FALSE(page_reporting_enabled);
+
+int page_reporting_register(struct page_reporting_dev_info *prdev)
+{
+	int err = 0;
+
+	mutex_lock(&page_reporting_mutex);
+
+	/* nothing to do if already in use */
+	if (rcu_access_pointer(pr_dev_info)) {
+		err = -EBUSY;
+		goto err_out;
+	}
+
+	/* initialize state and work structures */
+	atomic_set(&prdev->state, PAGE_REPORTING_IDLE);
+	INIT_DELAYED_WORK(&prdev->work, &page_reporting_process);
+
+	/* Begin initial flush of zones */
+	__page_reporting_request(prdev);
+
+	/* Assign device to allow notifications */
+	rcu_assign_pointer(pr_dev_info, prdev);
+
+	/* enable page reporting notification */
+	if (!static_key_enabled(&page_reporting_enabled)) {
+		static_branch_enable(&page_reporting_enabled);
+		pr_info("Free page reporting enabled\n");
+	}
+err_out:
+	mutex_unlock(&page_reporting_mutex);
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(page_reporting_register);
+
+void page_reporting_unregister(struct page_reporting_dev_info *prdev)
+{
+	mutex_lock(&page_reporting_mutex);
+
+	if (rcu_access_pointer(pr_dev_info) == prdev) {
+		/* Disable page reporting notification */
+		RCU_INIT_POINTER(pr_dev_info, NULL);
+		synchronize_rcu();
+
+		/* Flush any existing work, and lock it out */
+		cancel_delayed_work_sync(&prdev->work);
+	}
+
+	mutex_unlock(&page_reporting_mutex);
+}
+EXPORT_SYMBOL_GPL(page_reporting_unregister);
diff --git a/mm/page_reporting.h b/mm/page_reporting.h
new file mode 100644
index 0000000..aa6d37f
--- /dev/null
+++ b/mm/page_reporting.h
@@ -0,0 +1,54 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _MM_PAGE_REPORTING_H
+#define _MM_PAGE_REPORTING_H
+
+#include <linux/mmzone.h>
+#include <linux/pageblock-flags.h>
+#include <linux/page-isolation.h>
+#include <linux/jump_label.h>
+#include <linux/slab.h>
+#include <asm/pgtable.h>
+#include <linux/scatterlist.h>
+
+#define PAGE_REPORTING_MIN_ORDER	pageblock_order
+
+#ifdef CONFIG_PAGE_REPORTING
+DECLARE_STATIC_KEY_FALSE(page_reporting_enabled);
+void __page_reporting_notify(void);
+
+static inline bool page_reported(struct page *page)
+{
+	return static_branch_unlikely(&page_reporting_enabled) &&
+	       PageReported(page);
+}
+
+/**
+ * page_reporting_notify_free - Free page notification to start page processing
+ *
+ * This function is meant to act as a screener for __page_reporting_notify
+ * which will determine if a give zone has crossed over the high-water mark
+ * that will justify us beginning page treatment. If we have crossed that
+ * threshold then it will start the process of pulling some pages and
+ * placing them in the batch list for treatment.
+ */
+static inline void page_reporting_notify_free(unsigned int order)
+{
+	/* Called from hot path in __free_one_page() */
+	if (!static_branch_unlikely(&page_reporting_enabled))
+		return;
+
+	/* Determine if we have crossed reporting threshold */
+	if (order < PAGE_REPORTING_MIN_ORDER)
+		return;
+
+	/* This will add a few cycles, but should be called infrequently */
+	__page_reporting_notify();
+}
+#else /* CONFIG_PAGE_REPORTING */
+#define page_reported(_page)	false
+
+static inline void page_reporting_notify_free(unsigned int order)
+{
+}
+#endif /* CONFIG_PAGE_REPORTING */
+#endif /*_MM_PAGE_REPORTING_H */
diff --git a/mm/percpu-stats.c b/mm/percpu-stats.c
index a5a8b22..3255806 100644
--- a/mm/percpu-stats.c
+++ b/mm/percpu-stats.c
@@ -3,7 +3,7 @@
  * mm/percpu-debug.c
  *
  * Copyright (C) 2017		Facebook Inc.
- * Copyright (C) 2017		Dennis Zhou <dennisz@fb.com>
+ * Copyright (C) 2017		Dennis Zhou <dennis@kernel.org>
  *
  * Prints statistics about the percpu allocator and backing chunks.
  */
diff --git a/mm/percpu.c b/mm/percpu.c
index e984408..d7e3bc6 100644
--- a/mm/percpu.c
+++ b/mm/percpu.c
@@ -6,7 +6,7 @@
  * Copyright (C) 2009		Tejun Heo <tj@kernel.org>
  *
  * Copyright (C) 2017		Facebook Inc.
- * Copyright (C) 2017		Dennis Zhou <dennisszhou@gmail.com>
+ * Copyright (C) 2017		Dennis Zhou <dennis@kernel.org>
  *
  * The percpu allocator handles both static and dynamic areas.  Percpu
  * areas are allocated in chunks which are divided into units.  There is
diff --git a/mm/rmap.c b/mm/rmap.c
index 2df75a1..f79a206 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -275,19 +275,6 @@ int anon_vma_clone(struct vm_area_struct *dst, struct vm_area_struct *src)
 {
 	struct anon_vma_chain *avc, *pavc;
 	struct anon_vma *root = NULL;
-	struct vm_area_struct *prev = dst->vm_prev, *pprev = src->vm_prev;
-
-	/*
-	 * If parent share anon_vma with its vm_prev, keep this sharing in in
-	 * child.
-	 *
-	 * 1. Parent has vm_prev, which implies we have vm_prev.
-	 * 2. Parent and its vm_prev have the same anon_vma.
-	 */
-	if (!dst->anon_vma && src->anon_vma &&
-	    pprev && pprev->anon_vma == src->anon_vma)
-		dst->anon_vma = prev->anon_vma;
-
 
 	list_for_each_entry_reverse(pavc, &src->anon_vma_chain, same_vma) {
 		struct anon_vma *anon_vma;
@@ -946,7 +933,7 @@ static bool page_mkclean_one(struct page *page, struct vm_area_struct *vma,
 			set_pte_at(vma->vm_mm, address, pte, entry);
 			ret = 1;
 		} else {
-#ifdef CONFIG_TRANSPARENT_HUGE_PAGECACHE
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
 			pmd_t *pmd = pvmw.pmd;
 			pmd_t entry;
 
@@ -1385,7 +1372,7 @@ static bool try_to_unmap_one(struct page *page, struct vm_area_struct *vma,
 	struct page *subpage;
 	bool ret = true;
 	struct mmu_notifier_range range;
-	enum ttu_flags flags = (enum ttu_flags)arg;
+	enum ttu_flags flags = (enum ttu_flags)(long)arg;
 
 	/* munlock has nothing to gain from examining un-locked vmas */
 	if ((flags & TTU_MUNLOCK) && !(vma->vm_flags & VM_LOCKED))
@@ -1515,6 +1502,8 @@ static bool try_to_unmap_one(struct page *page, struct vm_area_struct *vma,
 			swp_pte = swp_entry_to_pte(entry);
 			if (pte_soft_dirty(pteval))
 				swp_pte = pte_swp_mksoft_dirty(swp_pte);
+			if (pte_uffd_wp(pteval))
+				swp_pte = pte_swp_mkuffd_wp(swp_pte);
 			set_pte_at(mm, pvmw.address, pvmw.pte, swp_pte);
 			/*
 			 * No need to invalidate here it will synchronize on
@@ -1614,6 +1603,8 @@ static bool try_to_unmap_one(struct page *page, struct vm_area_struct *vma,
 			swp_pte = swp_entry_to_pte(entry);
 			if (pte_soft_dirty(pteval))
 				swp_pte = pte_swp_mksoft_dirty(swp_pte);
+			if (pte_uffd_wp(pteval))
+				swp_pte = pte_swp_mkuffd_wp(swp_pte);
 			set_pte_at(mm, address, pvmw.pte, swp_pte);
 			/*
 			 * No need to invalidate here it will synchronize on
@@ -1680,6 +1671,8 @@ static bool try_to_unmap_one(struct page *page, struct vm_area_struct *vma,
 			swp_pte = swp_entry_to_pte(entry);
 			if (pte_soft_dirty(pteval))
 				swp_pte = pte_swp_mksoft_dirty(swp_pte);
+			if (pte_uffd_wp(pteval))
+				swp_pte = pte_swp_mkuffd_wp(swp_pte);
 			set_pte_at(mm, address, pvmw.pte, swp_pte);
 			/* Invalidate as we cleared the pte */
 			mmu_notifier_invalidate_range(mm, address,
diff --git a/mm/shmem.c b/mm/shmem.c
index aad3ba7..d722eb8 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -410,7 +410,7 @@ static bool shmem_confirm_swap(struct address_space *mapping,
 #define SHMEM_HUGE_DENY		(-1)
 #define SHMEM_HUGE_FORCE	(-2)
 
-#ifdef CONFIG_TRANSPARENT_HUGE_PAGECACHE
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
 /* ifdef here to avoid bloating shmem.o when not necessary */
 
 static int shmem_huge __read_mostly;
@@ -580,7 +580,7 @@ static long shmem_unused_huge_count(struct super_block *sb,
 	struct shmem_sb_info *sbinfo = SHMEM_SB(sb);
 	return READ_ONCE(sbinfo->shrinklist_len);
 }
-#else /* !CONFIG_TRANSPARENT_HUGE_PAGECACHE */
+#else /* !CONFIG_TRANSPARENT_HUGEPAGE */
 
 #define shmem_huge SHMEM_HUGE_DENY
 
@@ -589,11 +589,11 @@ static unsigned long shmem_unused_huge_shrink(struct shmem_sb_info *sbinfo,
 {
 	return 0;
 }
-#endif /* CONFIG_TRANSPARENT_HUGE_PAGECACHE */
+#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
 
 static inline bool is_huge_enabled(struct shmem_sb_info *sbinfo)
 {
-	if (IS_ENABLED(CONFIG_TRANSPARENT_HUGE_PAGECACHE) &&
+	if (IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE) &&
 	    (shmem_huge == SHMEM_HUGE_FORCE || sbinfo->huge) &&
 	    shmem_huge != SHMEM_HUGE_DENY)
 		return true;
@@ -789,6 +789,32 @@ void shmem_unlock_mapping(struct address_space *mapping)
 }
 
 /*
+ * Check whether a hole-punch or truncation needs to split a huge page,
+ * returning true if no split was required, or the split has been successful.
+ *
+ * Eviction (or truncation to 0 size) should never need to split a huge page;
+ * but in rare cases might do so, if shmem_undo_range() failed to trylock on
+ * head, and then succeeded to trylock on tail.
+ *
+ * A split can only succeed when there are no additional references on the
+ * huge page: so the split below relies upon find_get_entries() having stopped
+ * when it found a subpage of the huge page, without getting further references.
+ */
+static bool shmem_punch_compound(struct page *page, pgoff_t start, pgoff_t end)
+{
+	if (!PageTransCompound(page))
+		return true;
+
+	/* Just proceed to delete a huge page wholly within the range punched */
+	if (PageHead(page) &&
+	    page->index >= start && page->index + HPAGE_PMD_NR <= end)
+		return true;
+
+	/* Try to split huge page, so we can truly punch the hole or truncate */
+	return split_huge_page(page) >= 0;
+}
+
+/*
  * Remove range of pages and swap entries from page cache, and free them.
  * If !unfalloc, truncate or punch hole; if unfalloc, undo failed fallocate.
  */
@@ -838,31 +864,11 @@ static void shmem_undo_range(struct inode *inode, loff_t lstart, loff_t lend,
 			if (!trylock_page(page))
 				continue;
 
-			if (PageTransTail(page)) {
-				/* Middle of THP: zero out the page */
-				clear_highpage(page);
-				unlock_page(page);
-				continue;
-			} else if (PageTransHuge(page)) {
-				if (index == round_down(end, HPAGE_PMD_NR)) {
-					/*
-					 * Range ends in the middle of THP:
-					 * zero out the page
-					 */
-					clear_highpage(page);
-					unlock_page(page);
-					continue;
-				}
-				index += HPAGE_PMD_NR - 1;
-				i += HPAGE_PMD_NR - 1;
-			}
-
-			if (!unfalloc || !PageUptodate(page)) {
-				VM_BUG_ON_PAGE(PageTail(page), page);
-				if (page_mapping(page) == mapping) {
-					VM_BUG_ON_PAGE(PageWriteback(page), page);
+			if ((!unfalloc || !PageUptodate(page)) &&
+			    page_mapping(page) == mapping) {
+				VM_BUG_ON_PAGE(PageWriteback(page), page);
+				if (shmem_punch_compound(page, start, end))
 					truncate_inode_page(mapping, page);
-				}
 			}
 			unlock_page(page);
 		}
@@ -936,43 +942,25 @@ static void shmem_undo_range(struct inode *inode, loff_t lstart, loff_t lend,
 
 			lock_page(page);
 
-			if (PageTransTail(page)) {
-				/* Middle of THP: zero out the page */
-				clear_highpage(page);
-				unlock_page(page);
-				/*
-				 * Partial thp truncate due 'start' in middle
-				 * of THP: don't need to look on these pages
-				 * again on !pvec.nr restart.
-				 */
-				if (index != round_down(end, HPAGE_PMD_NR))
-					start++;
-				continue;
-			} else if (PageTransHuge(page)) {
-				if (index == round_down(end, HPAGE_PMD_NR)) {
-					/*
-					 * Range ends in the middle of THP:
-					 * zero out the page
-					 */
-					clear_highpage(page);
-					unlock_page(page);
-					continue;
-				}
-				index += HPAGE_PMD_NR - 1;
-				i += HPAGE_PMD_NR - 1;
-			}
-
 			if (!unfalloc || !PageUptodate(page)) {
-				VM_BUG_ON_PAGE(PageTail(page), page);
-				if (page_mapping(page) == mapping) {
-					VM_BUG_ON_PAGE(PageWriteback(page), page);
-					truncate_inode_page(mapping, page);
-				} else {
+				if (page_mapping(page) != mapping) {
 					/* Page was replaced by swap: retry */
 					unlock_page(page);
 					index--;
 					break;
 				}
+				VM_BUG_ON_PAGE(PageWriteback(page), page);
+				if (shmem_punch_compound(page, start, end))
+					truncate_inode_page(mapping, page);
+				else {
+					/* Wipe the page and don't get stuck */
+					clear_highpage(page);
+					flush_dcache_page(page);
+					set_page_dirty(page);
+					if (index <
+					    round_up(start, HPAGE_PMD_NR))
+						start = index + 1;
+				}
 			}
 			unlock_page(page);
 		}
@@ -1059,7 +1047,7 @@ static int shmem_setattr(struct dentry *dentry, struct iattr *attr)
 			 * Part of the huge page can be beyond i_size: subject
 			 * to shrink under memory pressure.
 			 */
-			if (IS_ENABLED(CONFIG_TRANSPARENT_HUGE_PAGECACHE)) {
+			if (IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE)) {
 				spin_lock(&sbinfo->shrinklist_lock);
 				/*
 				 * _careful to defend against unlocked access to
@@ -1472,9 +1460,6 @@ static struct page *shmem_alloc_hugepage(gfp_t gfp,
 	pgoff_t hindex;
 	struct page *page;
 
-	if (!IS_ENABLED(CONFIG_TRANSPARENT_HUGE_PAGECACHE))
-		return NULL;
-
 	hindex = round_down(index, HPAGE_PMD_NR);
 	if (xa_find(&mapping->i_pages, &hindex, hindex + HPAGE_PMD_NR - 1,
 								XA_PRESENT))
@@ -1486,6 +1471,8 @@ static struct page *shmem_alloc_hugepage(gfp_t gfp,
 	shmem_pseudo_vma_destroy(&pvma);
 	if (page)
 		prep_transhuge_page(page);
+	else
+		count_vm_event(THP_FILE_FALLBACK);
 	return page;
 }
 
@@ -1511,7 +1498,7 @@ static struct page *shmem_alloc_and_acct_page(gfp_t gfp,
 	int nr;
 	int err = -ENOSPC;
 
-	if (!IS_ENABLED(CONFIG_TRANSPARENT_HUGE_PAGECACHE))
+	if (!IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE))
 		huge = false;
 	nr = huge ? HPAGE_PMD_NR : 1;
 
@@ -1813,17 +1800,20 @@ static int shmem_getpage_gfp(struct inode *inode, pgoff_t index,
 	if (shmem_huge == SHMEM_HUGE_FORCE)
 		goto alloc_huge;
 	switch (sbinfo->huge) {
-		loff_t i_size;
-		pgoff_t off;
 	case SHMEM_HUGE_NEVER:
 		goto alloc_nohuge;
-	case SHMEM_HUGE_WITHIN_SIZE:
+	case SHMEM_HUGE_WITHIN_SIZE: {
+		loff_t i_size;
+		pgoff_t off;
+
 		off = round_up(index, HPAGE_PMD_NR);
 		i_size = round_up(i_size_read(inode), PAGE_SIZE);
 		if (i_size >= HPAGE_PMD_SIZE &&
 		    i_size >> PAGE_SHIFT >= off)
 			goto alloc_huge;
-		/* fallthrough */
+
+		fallthrough;
+	}
 	case SHMEM_HUGE_ADVISE:
 		if (sgp_huge == SGP_HUGE)
 			goto alloc_huge;
@@ -1871,8 +1861,13 @@ static int shmem_getpage_gfp(struct inode *inode, pgoff_t index,
 
 	error = mem_cgroup_try_charge_delay(page, charge_mm, gfp, &memcg,
 					    PageTransHuge(page));
-	if (error)
+	if (error) {
+		if (PageTransHuge(page)) {
+			count_vm_event(THP_FILE_FALLBACK);
+			count_vm_event(THP_FILE_FALLBACK_CHARGE);
+		}
 		goto unacct;
+	}
 	error = shmem_add_to_page_cache(page, mapping, hindex,
 					NULL, gfp & GFP_RECLAIM_MASK);
 	if (error) {
@@ -2089,7 +2084,7 @@ unsigned long shmem_get_unmapped_area(struct file *file,
 	get_area = current->mm->get_unmapped_area;
 	addr = get_area(file, uaddr, len, pgoff, flags);
 
-	if (!IS_ENABLED(CONFIG_TRANSPARENT_HUGE_PAGECACHE))
+	if (!IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE))
 		return addr;
 	if (IS_ERR_VALUE(addr))
 		return addr;
@@ -2228,7 +2223,7 @@ static int shmem_mmap(struct file *file, struct vm_area_struct *vma)
 
 	file_accessed(file);
 	vma->vm_ops = &shmem_vm_ops;
-	if (IS_ENABLED(CONFIG_TRANSPARENT_HUGE_PAGECACHE) &&
+	if (IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE) &&
 			((vma->vm_start + ~HPAGE_PMD_MASK) & HPAGE_PMD_MASK) <
 			(vma->vm_end & HPAGE_PMD_MASK)) {
 		khugepaged_enter(vma, vma->vm_flags);
@@ -3113,12 +3108,9 @@ static int shmem_symlink(struct inode *dir, struct dentry *dentry, const char *s
 
 	error = security_inode_init_security(inode, dir, &dentry->d_name,
 					     shmem_initxattrs, NULL);
-	if (error) {
-		if (error != -EOPNOTSUPP) {
-			iput(inode);
-			return error;
-		}
-		error = 0;
+	if (error && error != -EOPNOTSUPP) {
+		iput(inode);
+		return error;
 	}
 
 	inode->i_size = len-1;
@@ -3243,7 +3235,7 @@ static int shmem_xattr_handler_set(const struct xattr_handler *handler,
 	struct shmem_inode_info *info = SHMEM_I(inode);
 
 	name = xattr_full_name(handler, name);
-	return simple_xattr_set(&info->xattrs, name, value, size, flags);
+	return simple_xattr_set(&info->xattrs, name, value, size, flags, NULL);
 }
 
 static const struct xattr_handler shmem_security_xattr_handler = {
@@ -3455,7 +3447,7 @@ static int shmem_parse_one(struct fs_context *fc, struct fs_parameter *param)
 	case Opt_huge:
 		ctx->huge = result.uint_32;
 		if (ctx->huge != SHMEM_HUGE_NEVER &&
-		    !(IS_ENABLED(CONFIG_TRANSPARENT_HUGE_PAGECACHE) &&
+		    !(IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE) &&
 		      has_transparent_hugepage()))
 			goto unsupported_parameter;
 		ctx->seen |= SHMEM_SEEN_HUGE;
@@ -3601,7 +3593,7 @@ static int shmem_show_options(struct seq_file *seq, struct dentry *root)
 	if (!gid_eq(sbinfo->gid, GLOBAL_ROOT_GID))
 		seq_printf(seq, ",gid=%u",
 				from_kgid_munged(&init_user_ns, sbinfo->gid));
-#ifdef CONFIG_TRANSPARENT_HUGE_PAGECACHE
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
 	/* Rightly or wrongly, show huge mount option unmasked by shmem_huge */
 	if (sbinfo->huge)
 		seq_printf(seq, ",huge=%s", shmem_format_huge(sbinfo->huge));
@@ -3846,7 +3838,7 @@ static const struct super_operations shmem_ops = {
 	.evict_inode	= shmem_evict_inode,
 	.drop_inode	= generic_delete_inode,
 	.put_super	= shmem_put_super,
-#ifdef CONFIG_TRANSPARENT_HUGE_PAGECACHE
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
 	.nr_cached_objects	= shmem_unused_huge_count,
 	.free_cached_objects	= shmem_unused_huge_scan,
 #endif
@@ -3908,7 +3900,7 @@ int __init shmem_init(void)
 		goto out1;
 	}
 
-#ifdef CONFIG_TRANSPARENT_HUGE_PAGECACHE
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
 	if (has_transparent_hugepage() && shmem_huge > SHMEM_HUGE_DENY)
 		SHMEM_SB(shm_mnt->mnt_sb)->huge = shmem_huge;
 	else
@@ -3924,7 +3916,7 @@ int __init shmem_init(void)
 	return error;
 }
 
-#if defined(CONFIG_TRANSPARENT_HUGE_PAGECACHE) && defined(CONFIG_SYSFS)
+#if defined(CONFIG_TRANSPARENT_HUGEPAGE) && defined(CONFIG_SYSFS)
 static ssize_t shmem_enabled_show(struct kobject *kobj,
 		struct kobj_attribute *attr, char *buf)
 {
@@ -3976,9 +3968,9 @@ static ssize_t shmem_enabled_store(struct kobject *kobj,
 
 struct kobj_attribute shmem_enabled_attr =
 	__ATTR(shmem_enabled, 0644, shmem_enabled_show, shmem_enabled_store);
-#endif /* CONFIG_TRANSPARENT_HUGE_PAGECACHE && CONFIG_SYSFS */
+#endif /* CONFIG_TRANSPARENT_HUGEPAGE && CONFIG_SYSFS */
 
-#ifdef CONFIG_TRANSPARENT_HUGE_PAGECACHE
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
 bool shmem_huge_enabled(struct vm_area_struct *vma)
 {
 	struct inode *inode = file_inode(vma->vm_file);
@@ -4004,7 +3996,7 @@ bool shmem_huge_enabled(struct vm_area_struct *vma)
 			if (i_size >= HPAGE_PMD_SIZE &&
 					i_size >> PAGE_SHIFT >= off)
 				return true;
-			/* fall through */
+			fallthrough;
 		case SHMEM_HUGE_ADVISE:
 			/* TODO: implement fadvise() hints */
 			return (vma->vm_flags & VM_HUGEPAGE);
@@ -4013,7 +4005,7 @@ bool shmem_huge_enabled(struct vm_area_struct *vma)
 			return false;
 	}
 }
-#endif /* CONFIG_TRANSPARENT_HUGE_PAGECACHE */
+#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
 
 #else /* !CONFIG_SHMEM */
 
@@ -4182,7 +4174,7 @@ int shmem_zero_setup(struct vm_area_struct *vma)
 	vma->vm_file = file;
 	vma->vm_ops = &shmem_vm_ops;
 
-	if (IS_ENABLED(CONFIG_TRANSPARENT_HUGE_PAGECACHE) &&
+	if (IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE) &&
 			((vma->vm_start + ~HPAGE_PMD_MASK) & HPAGE_PMD_MASK) <
 			(vma->vm_end & HPAGE_PMD_MASK)) {
 		khugepaged_enter(vma, vma->vm_flags);
diff --git a/mm/shuffle.c b/mm/shuffle.c
index c716059..44406d9 100644
--- a/mm/shuffle.c
+++ b/mm/shuffle.c
@@ -183,11 +183,11 @@ void __meminit __shuffle_free_memory(pg_data_t *pgdat)
 		shuffle_zone(z);
 }
 
-void add_to_free_area_random(struct page *page, struct free_area *area,
-		int migratetype)
+bool shuffle_pick_tail(void)
 {
 	static u64 rand;
 	static u8 rand_bits;
+	bool ret;
 
 	/*
 	 * The lack of locking is deliberate. If 2 threads race to
@@ -198,10 +198,10 @@ void add_to_free_area_random(struct page *page, struct free_area *area,
 		rand = get_random_u64();
 	}
 
-	if (rand & 1)
-		add_to_free_area(page, area, migratetype);
-	else
-		add_to_free_area_tail(page, area, migratetype);
+	ret = rand & 1;
+
 	rand_bits--;
 	rand >>= 1;
+
+	return ret;
 }
diff --git a/mm/shuffle.h b/mm/shuffle.h
index 777a257..4d79f03 100644
--- a/mm/shuffle.h
+++ b/mm/shuffle.h
@@ -22,6 +22,7 @@ enum mm_shuffle_ctl {
 DECLARE_STATIC_KEY_FALSE(page_alloc_shuffle_key);
 extern void page_alloc_shuffle(enum mm_shuffle_ctl ctl);
 extern void __shuffle_free_memory(pg_data_t *pgdat);
+extern bool shuffle_pick_tail(void);
 static inline void shuffle_free_memory(pg_data_t *pgdat)
 {
 	if (!static_branch_unlikely(&page_alloc_shuffle_key))
@@ -44,6 +45,11 @@ static inline bool is_shuffle_order(int order)
 	return order >= SHUFFLE_ORDER;
 }
 #else
+static inline bool shuffle_pick_tail(void)
+{
+	return false;
+}
+
 static inline void shuffle_free_memory(pg_data_t *pgdat)
 {
 }
diff --git a/mm/slab_common.c b/mm/slab_common.c
index 5282f88..23c7500e 100644
--- a/mm/slab_common.c
+++ b/mm/slab_common.c
@@ -731,7 +731,7 @@ static void kmemcg_rcufn(struct rcu_head *head)
 	/*
 	 * We need to grab blocking locks.  Bounce to ->work.  The
 	 * work item shares the space with the RCU head and can't be
-	 * initialized eariler.
+	 * initialized earlier.
 	 */
 	INIT_WORK(&s->memcg_params.work, kmemcg_workfn);
 	queue_work(memcg_kmem_cache_wq, &s->memcg_params.work);
@@ -1581,6 +1581,7 @@ static int slabinfo_open(struct inode *inode, struct file *file)
 }
 
 static const struct proc_ops slabinfo_proc_ops = {
+	.proc_flags	= PROC_ENTRY_PERMANENT,
 	.proc_open	= slabinfo_open,
 	.proc_read	= seq_read,
 	.proc_write	= slabinfo_write,
diff --git a/mm/slub.c b/mm/slub.c
index 3098e0c..332d4b4 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -449,6 +449,7 @@ static DEFINE_SPINLOCK(object_map_lock);
  * not vanish from under us.
  */
 static unsigned long *get_map(struct kmem_cache *s, struct page *page)
+	__acquires(&object_map_lock)
 {
 	void *p;
 	void *addr = page_address(page);
@@ -465,7 +466,7 @@ static unsigned long *get_map(struct kmem_cache *s, struct page *page)
 	return object_map;
 }
 
-static void put_map(unsigned long *map)
+static void put_map(unsigned long *map) __releases(&object_map_lock)
 {
 	VM_BUG_ON(map != object_map);
 	lockdep_assert_held(&object_map_lock);
diff --git a/mm/sparse.c b/mm/sparse.c
index f1af4d4..1aee5a4 100644
--- a/mm/sparse.c
+++ b/mm/sparse.c
@@ -209,6 +209,7 @@ static inline unsigned long first_present_section_nr(void)
 	return next_present_section_nr(-1);
 }
 
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
 static void subsection_mask_set(unsigned long *map, unsigned long pfn,
 		unsigned long nr_pages)
 {
@@ -243,6 +244,11 @@ void __init subsection_map_init(unsigned long pfn, unsigned long nr_pages)
 		nr_pages -= pfns;
 	}
 }
+#else
+void __init subsection_map_init(unsigned long pfn, unsigned long nr_pages)
+{
+}
+#endif
 
 /* Record a memory area against a node. */
 void __init memory_present(int nid, unsigned long start, unsigned long end)
@@ -660,6 +666,55 @@ static void free_map_bootmem(struct page *memmap)
 
 	vmemmap_free(start, end, NULL);
 }
+
+static int clear_subsection_map(unsigned long pfn, unsigned long nr_pages)
+{
+	DECLARE_BITMAP(map, SUBSECTIONS_PER_SECTION) = { 0 };
+	DECLARE_BITMAP(tmp, SUBSECTIONS_PER_SECTION) = { 0 };
+	struct mem_section *ms = __pfn_to_section(pfn);
+	unsigned long *subsection_map = ms->usage
+		? &ms->usage->subsection_map[0] : NULL;
+
+	subsection_mask_set(map, pfn, nr_pages);
+	if (subsection_map)
+		bitmap_and(tmp, map, subsection_map, SUBSECTIONS_PER_SECTION);
+
+	if (WARN(!subsection_map || !bitmap_equal(tmp, map, SUBSECTIONS_PER_SECTION),
+				"section already deactivated (%#lx + %ld)\n",
+				pfn, nr_pages))
+		return -EINVAL;
+
+	bitmap_xor(subsection_map, map, subsection_map, SUBSECTIONS_PER_SECTION);
+	return 0;
+}
+
+static bool is_subsection_map_empty(struct mem_section *ms)
+{
+	return bitmap_empty(&ms->usage->subsection_map[0],
+			    SUBSECTIONS_PER_SECTION);
+}
+
+static int fill_subsection_map(unsigned long pfn, unsigned long nr_pages)
+{
+	struct mem_section *ms = __pfn_to_section(pfn);
+	DECLARE_BITMAP(map, SUBSECTIONS_PER_SECTION) = { 0 };
+	unsigned long *subsection_map;
+	int rc = 0;
+
+	subsection_mask_set(map, pfn, nr_pages);
+
+	subsection_map = &ms->usage->subsection_map[0];
+
+	if (bitmap_empty(map, SUBSECTIONS_PER_SECTION))
+		rc = -EINVAL;
+	else if (bitmap_intersects(map, subsection_map, SUBSECTIONS_PER_SECTION))
+		rc = -EEXIST;
+	else
+		bitmap_or(subsection_map, map, subsection_map,
+				SUBSECTIONS_PER_SECTION);
+
+	return rc;
+}
 #else
 struct page * __meminit populate_section_memmap(unsigned long pfn,
 		unsigned long nr_pages, int nid, struct vmem_altmap *altmap)
@@ -703,48 +758,51 @@ static void free_map_bootmem(struct page *memmap)
 			put_page_bootmem(page);
 	}
 }
+
+static int clear_subsection_map(unsigned long pfn, unsigned long nr_pages)
+{
+	return 0;
+}
+
+static bool is_subsection_map_empty(struct mem_section *ms)
+{
+	return true;
+}
+
+static int fill_subsection_map(unsigned long pfn, unsigned long nr_pages)
+{
+	return 0;
+}
 #endif /* CONFIG_SPARSEMEM_VMEMMAP */
 
+/*
+ * To deactivate a memory region, there are 3 cases to handle across
+ * two configurations (SPARSEMEM_VMEMMAP={y,n}):
+ *
+ * 1. deactivation of a partial hot-added section (only possible in
+ *    the SPARSEMEM_VMEMMAP=y case).
+ *      a) section was present at memory init.
+ *      b) section was hot-added post memory init.
+ * 2. deactivation of a complete hot-added section.
+ * 3. deactivation of a complete section from memory init.
+ *
+ * For 1, when subsection_map does not empty we will not be freeing the
+ * usage map, but still need to free the vmemmap range.
+ *
+ * For 2 and 3, the SPARSEMEM_VMEMMAP={y,n} cases are unified
+ */
 static void section_deactivate(unsigned long pfn, unsigned long nr_pages,
 		struct vmem_altmap *altmap)
 {
-	DECLARE_BITMAP(map, SUBSECTIONS_PER_SECTION) = { 0 };
-	DECLARE_BITMAP(tmp, SUBSECTIONS_PER_SECTION) = { 0 };
 	struct mem_section *ms = __pfn_to_section(pfn);
 	bool section_is_early = early_section(ms);
 	struct page *memmap = NULL;
 	bool empty;
-	unsigned long *subsection_map = ms->usage
-		? &ms->usage->subsection_map[0] : NULL;
 
-	subsection_mask_set(map, pfn, nr_pages);
-	if (subsection_map)
-		bitmap_and(tmp, map, subsection_map, SUBSECTIONS_PER_SECTION);
-
-	if (WARN(!subsection_map || !bitmap_equal(tmp, map, SUBSECTIONS_PER_SECTION),
-				"section already deactivated (%#lx + %ld)\n",
-				pfn, nr_pages))
+	if (clear_subsection_map(pfn, nr_pages))
 		return;
 
-	/*
-	 * There are 3 cases to handle across two configurations
-	 * (SPARSEMEM_VMEMMAP={y,n}):
-	 *
-	 * 1/ deactivation of a partial hot-added section (only possible
-	 * in the SPARSEMEM_VMEMMAP=y case).
-	 *    a/ section was present at memory init
-	 *    b/ section was hot-added post memory init
-	 * 2/ deactivation of a complete hot-added section
-	 * 3/ deactivation of a complete section from memory init
-	 *
-	 * For 1/, when subsection_map does not empty we will not be
-	 * freeing the usage map, but still need to free the vmemmap
-	 * range.
-	 *
-	 * For 2/ and 3/ the SPARSEMEM_VMEMMAP={y,n} cases are unified
-	 */
-	bitmap_xor(subsection_map, map, subsection_map, SUBSECTIONS_PER_SECTION);
-	empty = bitmap_empty(subsection_map, SUBSECTIONS_PER_SECTION);
+	empty = is_subsection_map_empty(ms);
 	if (empty) {
 		unsigned long section_nr = pfn_to_section_nr(pfn);
 
@@ -780,31 +838,19 @@ static void section_deactivate(unsigned long pfn, unsigned long nr_pages,
 static struct page * __meminit section_activate(int nid, unsigned long pfn,
 		unsigned long nr_pages, struct vmem_altmap *altmap)
 {
-	DECLARE_BITMAP(map, SUBSECTIONS_PER_SECTION) = { 0 };
 	struct mem_section *ms = __pfn_to_section(pfn);
 	struct mem_section_usage *usage = NULL;
-	unsigned long *subsection_map;
 	struct page *memmap;
 	int rc = 0;
 
-	subsection_mask_set(map, pfn, nr_pages);
-
 	if (!ms->usage) {
 		usage = kzalloc(mem_section_usage_size(), GFP_KERNEL);
 		if (!usage)
 			return ERR_PTR(-ENOMEM);
 		ms->usage = usage;
 	}
-	subsection_map = &ms->usage->subsection_map[0];
 
-	if (bitmap_empty(map, SUBSECTIONS_PER_SECTION))
-		rc = -EINVAL;
-	else if (bitmap_intersects(map, subsection_map, SUBSECTIONS_PER_SECTION))
-		rc = -EEXIST;
-	else
-		bitmap_or(subsection_map, map, subsection_map,
-				SUBSECTIONS_PER_SECTION);
-
+	rc = fill_subsection_map(pfn, nr_pages);
 	if (rc) {
 		if (usage)
 			ms->usage = NULL;
@@ -840,6 +886,10 @@ static struct page * __meminit section_activate(int nid, unsigned long pfn,
  *
  * This is only intended for hotplug.
  *
+ * Note that only VMEMMAP supports sub-section aligned hotplug,
+ * the proper alignment and size are gated by check_pfn_span().
+ *
+ *
  * Return:
  * * 0		- On success.
  * * -EEXIST	- Section has been present.
diff --git a/mm/swap.c b/mm/swap.c
index a4af8c9..bf9a79f 100644
--- a/mm/swap.c
+++ b/mm/swap.c
@@ -276,7 +276,7 @@ static void __activate_page(struct page *page, struct lruvec *lruvec,
 			    void *arg)
 {
 	if (PageLRU(page) && !PageActive(page) && !PageUnevictable(page)) {
-		int file = page_is_file_cache(page);
+		int file = page_is_file_lru(page);
 		int lru = page_lru_base_type(page);
 
 		del_page_from_lru_list(page, lruvec, lru);
@@ -394,7 +394,7 @@ void mark_page_accessed(struct page *page)
 		else
 			__lru_cache_activate_page(page);
 		ClearPageReferenced(page);
-		if (page_is_file_cache(page))
+		if (page_is_file_lru(page))
 			workingset_activation(page);
 	}
 	if (page_is_idle(page))
@@ -515,7 +515,7 @@ static void lru_deactivate_file_fn(struct page *page, struct lruvec *lruvec,
 		return;
 
 	active = PageActive(page);
-	file = page_is_file_cache(page);
+	file = page_is_file_lru(page);
 	lru = page_lru_base_type(page);
 
 	del_page_from_lru_list(page, lruvec, lru + active);
@@ -548,7 +548,7 @@ static void lru_deactivate_fn(struct page *page, struct lruvec *lruvec,
 			    void *arg)
 {
 	if (PageLRU(page) && PageActive(page) && !PageUnevictable(page)) {
-		int file = page_is_file_cache(page);
+		int file = page_is_file_lru(page);
 		int lru = page_lru_base_type(page);
 
 		del_page_from_lru_list(page, lruvec, lru + LRU_ACTIVE);
@@ -573,9 +573,9 @@ static void lru_lazyfree_fn(struct page *page, struct lruvec *lruvec,
 		ClearPageActive(page);
 		ClearPageReferenced(page);
 		/*
-		 * lazyfree pages are clean anonymous pages. They have
-		 * SwapBacked flag cleared to distinguish normal anonymous
-		 * pages
+		 * Lazyfree pages are clean anonymous pages.  They have
+		 * PG_swapbacked flag cleared, to distinguish them from normal
+		 * anonymous pages
 		 */
 		ClearPageSwapBacked(page);
 		add_page_to_lru_list(page, lruvec, LRU_INACTIVE_FILE);
@@ -962,7 +962,7 @@ static void __pagevec_lru_add_fn(struct page *page, struct lruvec *lruvec,
 
 	if (page_evictable(page)) {
 		lru = page_lru(page);
-		update_page_reclaim_stat(lruvec, page_is_file_cache(page),
+		update_page_reclaim_stat(lruvec, page_is_file_lru(page),
 					 PageActive(page));
 		if (was_unevictable)
 			count_vm_event(UNEVICTABLE_PGRESCUED);
@@ -1004,6 +1004,10 @@ void __pagevec_lru_add(struct pagevec *pvec)
  * ascending indexes.  There may be holes in the indices due to
  * not-present entries.
  *
+ * Only one subpage of a Transparent Huge Page is returned in one call:
+ * allowing truncate_inode_pages_range() to evict the whole THP without
+ * cycling through a pagevec of extra references.
+ *
  * pagevec_lookup_entries() returns the number of entries which were
  * found.
  */
diff --git a/mm/swapfile.c b/mm/swapfile.c
index 273a923..5871a2a 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -2797,6 +2797,7 @@ static int swaps_open(struct inode *inode, struct file *file)
 }
 
 static const struct proc_ops swaps_proc_ops = {
+	.proc_flags	= PROC_ENTRY_PERMANENT,
 	.proc_open	= swaps_open,
 	.proc_read	= seq_read,
 	.proc_lseek	= seq_lseek,
diff --git a/mm/userfaultfd.c b/mm/userfaultfd.c
index bd96855..512576e 100644
--- a/mm/userfaultfd.c
+++ b/mm/userfaultfd.c
@@ -53,7 +53,8 @@ static int mcopy_atomic_pte(struct mm_struct *dst_mm,
 			    struct vm_area_struct *dst_vma,
 			    unsigned long dst_addr,
 			    unsigned long src_addr,
-			    struct page **pagep)
+			    struct page **pagep,
+			    bool wp_copy)
 {
 	struct mem_cgroup *memcg;
 	pte_t _dst_pte, *dst_pte;
@@ -99,9 +100,13 @@ static int mcopy_atomic_pte(struct mm_struct *dst_mm,
 	if (mem_cgroup_try_charge(page, dst_mm, GFP_KERNEL, &memcg, false))
 		goto out_release;
 
-	_dst_pte = mk_pte(page, dst_vma->vm_page_prot);
-	if (dst_vma->vm_flags & VM_WRITE)
-		_dst_pte = pte_mkwrite(pte_mkdirty(_dst_pte));
+	_dst_pte = pte_mkdirty(mk_pte(page, dst_vma->vm_page_prot));
+	if (dst_vma->vm_flags & VM_WRITE) {
+		if (wp_copy)
+			_dst_pte = pte_mkuffd_wp(_dst_pte);
+		else
+			_dst_pte = pte_mkwrite(_dst_pte);
+	}
 
 	dst_pte = pte_offset_map_lock(dst_mm, dst_pmd, dst_addr, &ptl);
 	if (dst_vma->vm_file) {
@@ -415,7 +420,8 @@ static __always_inline ssize_t mfill_atomic_pte(struct mm_struct *dst_mm,
 						unsigned long dst_addr,
 						unsigned long src_addr,
 						struct page **page,
-						bool zeropage)
+						bool zeropage,
+						bool wp_copy)
 {
 	ssize_t err;
 
@@ -432,11 +438,13 @@ static __always_inline ssize_t mfill_atomic_pte(struct mm_struct *dst_mm,
 	if (!(dst_vma->vm_flags & VM_SHARED)) {
 		if (!zeropage)
 			err = mcopy_atomic_pte(dst_mm, dst_pmd, dst_vma,
-					       dst_addr, src_addr, page);
+					       dst_addr, src_addr, page,
+					       wp_copy);
 		else
 			err = mfill_zeropage_pte(dst_mm, dst_pmd,
 						 dst_vma, dst_addr);
 	} else {
+		VM_WARN_ON_ONCE(wp_copy);
 		if (!zeropage)
 			err = shmem_mcopy_atomic_pte(dst_mm, dst_pmd,
 						     dst_vma, dst_addr,
@@ -454,7 +462,8 @@ static __always_inline ssize_t __mcopy_atomic(struct mm_struct *dst_mm,
 					      unsigned long src_start,
 					      unsigned long len,
 					      bool zeropage,
-					      bool *mmap_changing)
+					      bool *mmap_changing,
+					      __u64 mode)
 {
 	struct vm_area_struct *dst_vma;
 	ssize_t err;
@@ -462,6 +471,7 @@ static __always_inline ssize_t __mcopy_atomic(struct mm_struct *dst_mm,
 	unsigned long src_addr, dst_addr;
 	long copied;
 	struct page *page;
+	bool wp_copy;
 
 	/*
 	 * Sanitize the command parameters:
@@ -508,6 +518,14 @@ static __always_inline ssize_t __mcopy_atomic(struct mm_struct *dst_mm,
 		goto out_unlock;
 
 	/*
+	 * validate 'mode' now that we know the dst_vma: don't allow
+	 * a wrprotect copy if the userfaultfd didn't register as WP.
+	 */
+	wp_copy = mode & UFFDIO_COPY_MODE_WP;
+	if (wp_copy && !(dst_vma->vm_flags & VM_UFFD_WP))
+		goto out_unlock;
+
+	/*
 	 * If this is a HUGETLB vma, pass off to appropriate routine
 	 */
 	if (is_vm_hugetlb_page(dst_vma))
@@ -562,7 +580,7 @@ static __always_inline ssize_t __mcopy_atomic(struct mm_struct *dst_mm,
 		BUG_ON(pmd_trans_huge(*dst_pmd));
 
 		err = mfill_atomic_pte(dst_mm, dst_pmd, dst_vma, dst_addr,
-				       src_addr, &page, zeropage);
+				       src_addr, &page, zeropage, wp_copy);
 		cond_resched();
 
 		if (unlikely(err == -ENOENT)) {
@@ -609,14 +627,68 @@ static __always_inline ssize_t __mcopy_atomic(struct mm_struct *dst_mm,
 
 ssize_t mcopy_atomic(struct mm_struct *dst_mm, unsigned long dst_start,
 		     unsigned long src_start, unsigned long len,
-		     bool *mmap_changing)
+		     bool *mmap_changing, __u64 mode)
 {
 	return __mcopy_atomic(dst_mm, dst_start, src_start, len, false,
-			      mmap_changing);
+			      mmap_changing, mode);
 }
 
 ssize_t mfill_zeropage(struct mm_struct *dst_mm, unsigned long start,
 		       unsigned long len, bool *mmap_changing)
 {
-	return __mcopy_atomic(dst_mm, start, 0, len, true, mmap_changing);
+	return __mcopy_atomic(dst_mm, start, 0, len, true, mmap_changing, 0);
+}
+
+int mwriteprotect_range(struct mm_struct *dst_mm, unsigned long start,
+			unsigned long len, bool enable_wp, bool *mmap_changing)
+{
+	struct vm_area_struct *dst_vma;
+	pgprot_t newprot;
+	int err;
+
+	/*
+	 * Sanitize the command parameters:
+	 */
+	BUG_ON(start & ~PAGE_MASK);
+	BUG_ON(len & ~PAGE_MASK);
+
+	/* Does the address range wrap, or is the span zero-sized? */
+	BUG_ON(start + len <= start);
+
+	down_read(&dst_mm->mmap_sem);
+
+	/*
+	 * If memory mappings are changing because of non-cooperative
+	 * operation (e.g. mremap) running in parallel, bail out and
+	 * request the user to retry later
+	 */
+	err = -EAGAIN;
+	if (mmap_changing && READ_ONCE(*mmap_changing))
+		goto out_unlock;
+
+	err = -ENOENT;
+	dst_vma = find_dst_vma(dst_mm, start, len);
+	/*
+	 * Make sure the vma is not shared, that the dst range is
+	 * both valid and fully within a single existing vma.
+	 */
+	if (!dst_vma || (dst_vma->vm_flags & VM_SHARED))
+		goto out_unlock;
+	if (!userfaultfd_wp(dst_vma))
+		goto out_unlock;
+	if (!vma_is_anonymous(dst_vma))
+		goto out_unlock;
+
+	if (enable_wp)
+		newprot = vm_get_page_prot(dst_vma->vm_flags & ~(VM_WRITE));
+	else
+		newprot = vm_get_page_prot(dst_vma->vm_flags);
+
+	change_protection(dst_vma, start, start + len, newprot,
+			  enable_wp ? MM_CP_UFFD_WP : MM_CP_UFFD_WP_RESOLVE);
+
+	err = 0;
+out_unlock:
+	up_read(&dst_mm->mmap_sem);
+	return err;
 }
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 6b8eeb0..399f219 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -3368,7 +3368,7 @@ struct vm_struct **pcpu_get_vm_areas(const unsigned long *offsets,
 			goto overflow;
 
 		/*
-		 * If required width exeeds current VA block, move
+		 * If required width exceeds current VA block, move
 		 * base downwards and then recheck.
 		 */
 		if (base + end > va->va_end) {
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 2e8e690..b06868f 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -919,7 +919,7 @@ static int __remove_mapping(struct address_space *mapping, struct page *page,
 		 * exceptional entries and shadow exceptional entries in the
 		 * same address_space.
 		 */
-		if (reclaimed && page_is_file_cache(page) &&
+		if (reclaimed && page_is_file_lru(page) &&
 		    !mapping_exiting(mapping) && !dax_mapping(mapping))
 			shadow = workingset_eviction(page, target_memcg);
 		__delete_from_page_cache(page, shadow);
@@ -1043,7 +1043,7 @@ static void page_check_dirty_writeback(struct page *page,
 	 * Anonymous pages are not handled by flushers and must be written
 	 * from reclaim context. Do not stall reclaim based on them
 	 */
-	if (!page_is_file_cache(page) ||
+	if (!page_is_file_lru(page) ||
 	    (PageAnon(page) && !PageSwapBacked(page))) {
 		*dirty = false;
 		*writeback = false;
@@ -1315,7 +1315,7 @@ static unsigned long shrink_page_list(struct list_head *page_list,
 			 * the rest of the LRU for clean pages and see
 			 * the same dirty pages again (PageReclaim).
 			 */
-			if (page_is_file_cache(page) &&
+			if (page_is_file_lru(page) &&
 			    (!current_is_kswapd() || !PageReclaim(page) ||
 			     !test_bit(PGDAT_DIRTY, &pgdat->flags))) {
 				/*
@@ -1459,7 +1459,7 @@ static unsigned long shrink_page_list(struct list_head *page_list,
 			try_to_free_swap(page);
 		VM_BUG_ON_PAGE(PageActive(page), page);
 		if (!PageMlocked(page)) {
-			int type = page_is_file_cache(page);
+			int type = page_is_file_lru(page);
 			SetPageActive(page);
 			stat->nr_activate[type] += nr_pages;
 			count_memcg_page_event(page, PGACTIVATE);
@@ -1497,7 +1497,7 @@ unsigned long reclaim_clean_pages_from_list(struct zone *zone,
 	LIST_HEAD(clean_pages);
 
 	list_for_each_entry_safe(page, next, page_list, lru) {
-		if (page_is_file_cache(page) && !PageDirty(page) &&
+		if (page_is_file_lru(page) && !PageDirty(page) &&
 		    !__PageMovable(page) && !PageUnevictable(page)) {
 			ClearPageActive(page);
 			list_move(&page->lru, &clean_pages);
@@ -2053,7 +2053,7 @@ static void shrink_active_list(unsigned long nr_to_scan,
 			 * IO, plus JVM can create lots of anon VM_EXEC pages,
 			 * so we ignore them here.
 			 */
-			if ((vm_flags & VM_EXEC) && page_is_file_cache(page)) {
+			if ((vm_flags & VM_EXEC) && page_is_file_lru(page)) {
 				list_add(&page->lru, &l_active);
 				continue;
 			}
diff --git a/mm/vmstat.c b/mm/vmstat.c
index c9c0d71..96d21a7 100644
--- a/mm/vmstat.c
+++ b/mm/vmstat.c
@@ -1256,9 +1256,12 @@ const char * const vmstat_text[] = {
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
 	"thp_fault_alloc",
 	"thp_fault_fallback",
+	"thp_fault_fallback_charge",
 	"thp_collapse_alloc",
 	"thp_collapse_alloc_failed",
 	"thp_file_alloc",
+	"thp_file_fallback",
+	"thp_file_fallback_charge",
 	"thp_file_mapped",
 	"thp_split_page",
 	"thp_split_page_failed",
diff --git a/mm/zsmalloc.c b/mm/zsmalloc.c
index 22d17ec..2f836a2b 100644
--- a/mm/zsmalloc.c
+++ b/mm/zsmalloc.c
@@ -424,7 +424,7 @@ static void *zs_zpool_map(void *pool, unsigned long handle,
 	case ZPOOL_MM_WO:
 		zs_mm = ZS_MM_WO;
 		break;
-	case ZPOOL_MM_RW: /* fall through */
+	case ZPOOL_MM_RW:
 	default:
 		zs_mm = ZS_MM_RW;
 		break;
@@ -891,12 +891,12 @@ static inline int trypin_tag(unsigned long handle)
 	return bit_spin_trylock(HANDLE_PIN_BIT, (unsigned long *)handle);
 }
 
-static void pin_tag(unsigned long handle)
+static void pin_tag(unsigned long handle) __acquires(bitlock)
 {
 	bit_spin_lock(HANDLE_PIN_BIT, (unsigned long *)handle);
 }
 
-static void unpin_tag(unsigned long handle)
+static void unpin_tag(unsigned long handle) __releases(bitlock)
 {
 	bit_spin_unlock(HANDLE_PIN_BIT, (unsigned long *)handle);
 }
@@ -1833,12 +1833,12 @@ static void migrate_lock_init(struct zspage *zspage)
 	rwlock_init(&zspage->lock);
 }
 
-static void migrate_read_lock(struct zspage *zspage)
+static void migrate_read_lock(struct zspage *zspage) __acquires(&zspage->lock)
 {
 	read_lock(&zspage->lock);
 }
 
-static void migrate_read_unlock(struct zspage *zspage)
+static void migrate_read_unlock(struct zspage *zspage) __releases(&zspage->lock)
 {
 	read_unlock(&zspage->lock);
 }
diff --git a/mm/zswap.c b/mm/zswap.c
index 55094e6..fbb7829 100644
--- a/mm/zswap.c
+++ b/mm/zswap.c
@@ -77,8 +77,8 @@ static bool zswap_pool_reached_full;
 
 #define ZSWAP_PARAM_UNSET ""
 
-/* Enable/disable zswap (disabled by default) */
-static bool zswap_enabled;
+/* Enable/disable zswap */
+static bool zswap_enabled = IS_ENABLED(CONFIG_ZSWAP_DEFAULT_ON);
 static int zswap_enabled_param_set(const char *,
 				   const struct kernel_param *);
 static struct kernel_param_ops zswap_enabled_param_ops = {
@@ -88,8 +88,7 @@ static struct kernel_param_ops zswap_enabled_param_ops = {
 module_param_cb(enabled, &zswap_enabled_param_ops, &zswap_enabled, 0644);
 
 /* Crypto compressor to use */
-#define ZSWAP_COMPRESSOR_DEFAULT "lzo"
-static char *zswap_compressor = ZSWAP_COMPRESSOR_DEFAULT;
+static char *zswap_compressor = CONFIG_ZSWAP_COMPRESSOR_DEFAULT;
 static int zswap_compressor_param_set(const char *,
 				      const struct kernel_param *);
 static struct kernel_param_ops zswap_compressor_param_ops = {
@@ -101,8 +100,7 @@ module_param_cb(compressor, &zswap_compressor_param_ops,
 		&zswap_compressor, 0644);
 
 /* Compressed storage zpool to use */
-#define ZSWAP_ZPOOL_DEFAULT "zbud"
-static char *zswap_zpool_type = ZSWAP_ZPOOL_DEFAULT;
+static char *zswap_zpool_type = CONFIG_ZSWAP_ZPOOL_DEFAULT;
 static int zswap_zpool_param_set(const char *, const struct kernel_param *);
 static struct kernel_param_ops zswap_zpool_param_ops = {
 	.set =		zswap_zpool_param_set,
@@ -599,11 +597,12 @@ static __init struct zswap_pool *__zswap_pool_create_fallback(void)
 	bool has_comp, has_zpool;
 
 	has_comp = crypto_has_comp(zswap_compressor, 0, 0);
-	if (!has_comp && strcmp(zswap_compressor, ZSWAP_COMPRESSOR_DEFAULT)) {
+	if (!has_comp && strcmp(zswap_compressor,
+				CONFIG_ZSWAP_COMPRESSOR_DEFAULT)) {
 		pr_err("compressor %s not available, using default %s\n",
-		       zswap_compressor, ZSWAP_COMPRESSOR_DEFAULT);
+		       zswap_compressor, CONFIG_ZSWAP_COMPRESSOR_DEFAULT);
 		param_free_charp(&zswap_compressor);
-		zswap_compressor = ZSWAP_COMPRESSOR_DEFAULT;
+		zswap_compressor = CONFIG_ZSWAP_COMPRESSOR_DEFAULT;
 		has_comp = crypto_has_comp(zswap_compressor, 0, 0);
 	}
 	if (!has_comp) {
@@ -614,11 +613,12 @@ static __init struct zswap_pool *__zswap_pool_create_fallback(void)
 	}
 
 	has_zpool = zpool_has_pool(zswap_zpool_type);
-	if (!has_zpool && strcmp(zswap_zpool_type, ZSWAP_ZPOOL_DEFAULT)) {
+	if (!has_zpool && strcmp(zswap_zpool_type,
+				 CONFIG_ZSWAP_ZPOOL_DEFAULT)) {
 		pr_err("zpool %s not available, using default %s\n",
-		       zswap_zpool_type, ZSWAP_ZPOOL_DEFAULT);
+		       zswap_zpool_type, CONFIG_ZSWAP_ZPOOL_DEFAULT);
 		param_free_charp(&zswap_zpool_type);
-		zswap_zpool_type = ZSWAP_ZPOOL_DEFAULT;
+		zswap_zpool_type = CONFIG_ZSWAP_ZPOOL_DEFAULT;
 		has_zpool = zpool_has_pool(zswap_zpool_type);
 	}
 	if (!has_zpool) {
diff --git a/net/9p/client.c b/net/9p/client.c
index 1d48afc..fc1f363 100644
--- a/net/9p/client.c
+++ b/net/9p/client.c
@@ -1549,84 +1549,96 @@ EXPORT_SYMBOL(p9_client_unlinkat);
 int
 p9_client_read(struct p9_fid *fid, u64 offset, struct iov_iter *to, int *err)
 {
-	struct p9_client *clnt = fid->clnt;
-	struct p9_req_t *req;
 	int total = 0;
 	*err = 0;
 
-	p9_debug(P9_DEBUG_9P, ">>> TREAD fid %d offset %llu %d\n",
-		   fid->fid, (unsigned long long) offset, (int)iov_iter_count(to));
-
 	while (iov_iter_count(to)) {
-		int count = iov_iter_count(to);
-		int rsize, non_zc = 0;
-		char *dataptr;
+		int count;
 
-		rsize = fid->iounit;
-		if (!rsize || rsize > clnt->msize-P9_IOHDRSZ)
-			rsize = clnt->msize - P9_IOHDRSZ;
-
-		if (count < rsize)
-			rsize = count;
-
-		/* Don't bother zerocopy for small IO (< 1024) */
-		if (clnt->trans_mod->zc_request && rsize > 1024) {
-			/*
-			 * response header len is 11
-			 * PDU Header(7) + IO Size (4)
-			 */
-			req = p9_client_zc_rpc(clnt, P9_TREAD, to, NULL, rsize,
-					       0, 11, "dqd", fid->fid,
-					       offset, rsize);
-		} else {
-			non_zc = 1;
-			req = p9_client_rpc(clnt, P9_TREAD, "dqd", fid->fid, offset,
-					    rsize);
-		}
-		if (IS_ERR(req)) {
-			*err = PTR_ERR(req);
+		count = p9_client_read_once(fid, offset, to, err);
+		if (!count || *err)
 			break;
-		}
-
-		*err = p9pdu_readf(&req->rc, clnt->proto_version,
-				   "D", &count, &dataptr);
-		if (*err) {
-			trace_9p_protocol_dump(clnt, &req->rc);
-			p9_tag_remove(clnt, req);
-			break;
-		}
-		if (rsize < count) {
-			pr_err("bogus RREAD count (%d > %d)\n", count, rsize);
-			count = rsize;
-		}
-
-		p9_debug(P9_DEBUG_9P, "<<< RREAD count %d\n", count);
-		if (!count) {
-			p9_tag_remove(clnt, req);
-			break;
-		}
-
-		if (non_zc) {
-			int n = copy_to_iter(dataptr, count, to);
-			total += n;
-			offset += n;
-			if (n != count) {
-				*err = -EFAULT;
-				p9_tag_remove(clnt, req);
-				break;
-			}
-		} else {
-			iov_iter_advance(to, count);
-			total += count;
-			offset += count;
-		}
-		p9_tag_remove(clnt, req);
+		offset += count;
+		total += count;
 	}
 	return total;
 }
 EXPORT_SYMBOL(p9_client_read);
 
 int
+p9_client_read_once(struct p9_fid *fid, u64 offset, struct iov_iter *to,
+		    int *err)
+{
+	struct p9_client *clnt = fid->clnt;
+	struct p9_req_t *req;
+	int count = iov_iter_count(to);
+	int rsize, non_zc = 0;
+	char *dataptr;
+
+	*err = 0;
+	p9_debug(P9_DEBUG_9P, ">>> TREAD fid %d offset %llu %d\n",
+		   fid->fid, (unsigned long long) offset, (int)iov_iter_count(to));
+
+	rsize = fid->iounit;
+	if (!rsize || rsize > clnt->msize - P9_IOHDRSZ)
+		rsize = clnt->msize - P9_IOHDRSZ;
+
+	if (count < rsize)
+		rsize = count;
+
+	/* Don't bother zerocopy for small IO (< 1024) */
+	if (clnt->trans_mod->zc_request && rsize > 1024) {
+		/* response header len is 11
+		 * PDU Header(7) + IO Size (4)
+		 */
+		req = p9_client_zc_rpc(clnt, P9_TREAD, to, NULL, rsize,
+				       0, 11, "dqd", fid->fid,
+				       offset, rsize);
+	} else {
+		non_zc = 1;
+		req = p9_client_rpc(clnt, P9_TREAD, "dqd", fid->fid, offset,
+				    rsize);
+	}
+	if (IS_ERR(req)) {
+		*err = PTR_ERR(req);
+		return 0;
+	}
+
+	*err = p9pdu_readf(&req->rc, clnt->proto_version,
+			   "D", &count, &dataptr);
+	if (*err) {
+		trace_9p_protocol_dump(clnt, &req->rc);
+		p9_tag_remove(clnt, req);
+		return 0;
+	}
+	if (rsize < count) {
+		pr_err("bogus RREAD count (%d > %d)\n", count, rsize);
+		count = rsize;
+	}
+
+	p9_debug(P9_DEBUG_9P, "<<< RREAD count %d\n", count);
+	if (!count) {
+		p9_tag_remove(clnt, req);
+		return 0;
+	}
+
+	if (non_zc) {
+		int n = copy_to_iter(dataptr, count, to);
+
+		if (n != count) {
+			*err = -EFAULT;
+			p9_tag_remove(clnt, req);
+			return n;
+		}
+	} else {
+		iov_iter_advance(to, count);
+	}
+	p9_tag_remove(clnt, req);
+	return count;
+}
+EXPORT_SYMBOL(p9_client_read_once);
+
+int
 p9_client_write(struct p9_fid *fid, u64 offset, struct iov_iter *from, int *err)
 {
 	struct p9_client *clnt = fid->clnt;
diff --git a/net/bpfilter/.gitignore b/net/bpfilter/.gitignore
index e97084e..f34e85e 100644
--- a/net/bpfilter/.gitignore
+++ b/net/bpfilter/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 bpfilter_umh
diff --git a/net/ceph/debugfs.c b/net/ceph/debugfs.c
index 7cb992e..1344f23 100644
--- a/net/ceph/debugfs.c
+++ b/net/ceph/debugfs.c
@@ -383,11 +383,11 @@ static int client_options_show(struct seq_file *s, void *p)
 	return 0;
 }
 
-CEPH_DEFINE_SHOW_FUNC(monmap_show)
-CEPH_DEFINE_SHOW_FUNC(osdmap_show)
-CEPH_DEFINE_SHOW_FUNC(monc_show)
-CEPH_DEFINE_SHOW_FUNC(osdc_show)
-CEPH_DEFINE_SHOW_FUNC(client_options_show)
+DEFINE_SHOW_ATTRIBUTE(monmap);
+DEFINE_SHOW_ATTRIBUTE(osdmap);
+DEFINE_SHOW_ATTRIBUTE(monc);
+DEFINE_SHOW_ATTRIBUTE(osdc);
+DEFINE_SHOW_ATTRIBUTE(client_options);
 
 void __init ceph_debugfs_init(void)
 {
@@ -414,31 +414,31 @@ void ceph_debugfs_client_init(struct ceph_client *client)
 						      0400,
 						      client->debugfs_dir,
 						      client,
-						      &monc_show_fops);
+						      &monc_fops);
 
 	client->osdc.debugfs_file = debugfs_create_file("osdc",
 						      0400,
 						      client->debugfs_dir,
 						      client,
-						      &osdc_show_fops);
+						      &osdc_fops);
 
 	client->debugfs_monmap = debugfs_create_file("monmap",
 					0400,
 					client->debugfs_dir,
 					client,
-					&monmap_show_fops);
+					&monmap_fops);
 
 	client->debugfs_osdmap = debugfs_create_file("osdmap",
 					0400,
 					client->debugfs_dir,
 					client,
-					&osdmap_show_fops);
+					&osdmap_fops);
 
 	client->debugfs_options = debugfs_create_file("client_options",
 					0400,
 					client->debugfs_dir,
 					client,
-					&client_options_show_fops);
+					&client_options_fops);
 }
 
 void ceph_debugfs_client_cleanup(struct ceph_client *client)
diff --git a/net/ceph/mon_client.c b/net/ceph/mon_client.c
index 9d9e4e4..3d8c801 100644
--- a/net/ceph/mon_client.c
+++ b/net/ceph/mon_client.c
@@ -467,7 +467,7 @@ static void ceph_monc_handle_map(struct ceph_mon_client *monc,
 				 struct ceph_msg *msg)
 {
 	struct ceph_client *client = monc->client;
-	struct ceph_monmap *monmap = NULL, *old = monc->monmap;
+	struct ceph_monmap *monmap;
 	void *p, *end;
 
 	mutex_lock(&monc->mutex);
@@ -484,13 +484,13 @@ static void ceph_monc_handle_map(struct ceph_mon_client *monc,
 		goto out;
 	}
 
-	if (ceph_check_fsid(monc->client, &monmap->fsid) < 0) {
+	if (ceph_check_fsid(client, &monmap->fsid) < 0) {
 		kfree(monmap);
 		goto out;
 	}
 
-	client->monc.monmap = monmap;
-	kfree(old);
+	kfree(monc->monmap);
+	monc->monmap = monmap;
 
 	__ceph_monc_got_map(monc, CEPH_SUB_MONMAP, monc->monmap->epoch);
 	client->have_fsid = true;
diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c
index af868d3..998e26b 100644
--- a/net/ceph/osd_client.c
+++ b/net/ceph/osd_client.c
@@ -3483,9 +3483,6 @@ static int ceph_redirect_decode(void **p, void *end,
 		goto e_inval;
 	}
 
-	len = ceph_decode_32(p);
-	*p += len; /* skip osd_instructions */
-
 	/* skip the rest */
 	*p = struct_end;
 out:
@@ -5228,85 +5225,6 @@ void ceph_osdc_stop(struct ceph_osd_client *osdc)
 	ceph_msgpool_destroy(&osdc->msgpool_op_reply);
 }
 
-/*
- * Read some contiguous pages.  If we cross a stripe boundary, shorten
- * *plen.  Return number of bytes read, or error.
- */
-int ceph_osdc_readpages(struct ceph_osd_client *osdc,
-			struct ceph_vino vino, struct ceph_file_layout *layout,
-			u64 off, u64 *plen,
-			u32 truncate_seq, u64 truncate_size,
-			struct page **pages, int num_pages, int page_align)
-{
-	struct ceph_osd_request *req;
-	int rc = 0;
-
-	dout("readpages on ino %llx.%llx on %llu~%llu\n", vino.ino,
-	     vino.snap, off, *plen);
-	req = ceph_osdc_new_request(osdc, layout, vino, off, plen, 0, 1,
-				    CEPH_OSD_OP_READ, CEPH_OSD_FLAG_READ,
-				    NULL, truncate_seq, truncate_size,
-				    false);
-	if (IS_ERR(req))
-		return PTR_ERR(req);
-
-	/* it may be a short read due to an object boundary */
-	osd_req_op_extent_osd_data_pages(req, 0,
-				pages, *plen, page_align, false, false);
-
-	dout("readpages  final extent is %llu~%llu (%llu bytes align %d)\n",
-	     off, *plen, *plen, page_align);
-
-	rc = ceph_osdc_start_request(osdc, req, false);
-	if (!rc)
-		rc = ceph_osdc_wait_request(osdc, req);
-
-	ceph_osdc_put_request(req);
-	dout("readpages result %d\n", rc);
-	return rc;
-}
-EXPORT_SYMBOL(ceph_osdc_readpages);
-
-/*
- * do a synchronous write on N pages
- */
-int ceph_osdc_writepages(struct ceph_osd_client *osdc, struct ceph_vino vino,
-			 struct ceph_file_layout *layout,
-			 struct ceph_snap_context *snapc,
-			 u64 off, u64 len,
-			 u32 truncate_seq, u64 truncate_size,
-			 struct timespec64 *mtime,
-			 struct page **pages, int num_pages)
-{
-	struct ceph_osd_request *req;
-	int rc = 0;
-	int page_align = off & ~PAGE_MASK;
-
-	req = ceph_osdc_new_request(osdc, layout, vino, off, &len, 0, 1,
-				    CEPH_OSD_OP_WRITE, CEPH_OSD_FLAG_WRITE,
-				    snapc, truncate_seq, truncate_size,
-				    true);
-	if (IS_ERR(req))
-		return PTR_ERR(req);
-
-	/* it may be a short write due to an object boundary */
-	osd_req_op_extent_osd_data_pages(req, 0, pages, len, page_align,
-				false, false);
-	dout("writepages %llu~%llu (%llu bytes)\n", off, len, len);
-
-	req->r_mtime = *mtime;
-	rc = ceph_osdc_start_request(osdc, req, true);
-	if (!rc)
-		rc = ceph_osdc_wait_request(osdc, req);
-
-	ceph_osdc_put_request(req);
-	if (rc == 0)
-		rc = len;
-	dout("writepages result %d\n", rc);
-	return rc;
-}
-EXPORT_SYMBOL(ceph_osdc_writepages);
-
 static int osd_req_op_copy_from_init(struct ceph_osd_request *req,
 				     u64 src_snapid, u64 src_version,
 				     struct ceph_object_id *src_oid,
diff --git a/net/core/dev.c b/net/core/dev.c
index 9c9e763..5222881 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -4140,7 +4140,8 @@ EXPORT_SYMBOL(netdev_max_backlog);
 
 int netdev_tstamp_prequeue __read_mostly = 1;
 int netdev_budget __read_mostly = 300;
-unsigned int __read_mostly netdev_budget_usecs = 2000;
+/* Must be at least 2 jiffes to guarantee 1 jiffy timeout */
+unsigned int __read_mostly netdev_budget_usecs = 2 * USEC_PER_SEC / HZ;
 int weight_p __read_mostly = 64;           /* old backlog weight */
 int dev_weight_rx_bias __read_mostly = 1;  /* bias for backlog weight */
 int dev_weight_tx_bias __read_mostly = 1;  /* bias for output_queue quota */
@@ -8666,8 +8667,8 @@ int dev_change_xdp_fd(struct net_device *dev, struct netlink_ext_ack *extack,
 	const struct net_device_ops *ops = dev->netdev_ops;
 	enum bpf_netdev_command query;
 	u32 prog_id, expected_id = 0;
-	struct bpf_prog *prog = NULL;
 	bpf_op_t bpf_op, bpf_chk;
+	struct bpf_prog *prog;
 	bool offload;
 	int err;
 
@@ -8733,6 +8734,7 @@ int dev_change_xdp_fd(struct net_device *dev, struct netlink_ext_ack *extack,
 	} else {
 		if (!prog_id)
 			return 0;
+		prog = NULL;
 	}
 
 	err = dev_xdp_install(dev, bpf_op, extack, flags, prog);
diff --git a/net/core/filter.c b/net/core/filter.c
index 7628b94..7d6ceaa 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -5925,7 +5925,7 @@ BPF_CALL_3(bpf_sk_assign, struct sk_buff *, skb, struct sock *, sk, u64, flags)
 		return -EOPNOTSUPP;
 	if (unlikely(dev_net(skb->dev) != sock_net(sk)))
 		return -ENETUNREACH;
-	if (unlikely(sk->sk_reuseport))
+	if (unlikely(sk_fullsock(sk) && sk->sk_reuseport))
 		return -ESOCKTNOSUPPORT;
 	if (sk_is_refcounted(sk) &&
 	    unlikely(!refcount_inc_not_zero(&sk->sk_refcnt)))
diff --git a/net/core/neighbour.c b/net/core/neighbour.c
index 5bf8d22..39d37d0 100644
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -1065,11 +1065,12 @@ static void neigh_timer_handler(struct timer_list *t)
 			neigh->updated = jiffies;
 			atomic_set(&neigh->probes, 0);
 			notify = 1;
-			next = now + NEIGH_VAR(neigh->parms, RETRANS_TIME);
+			next = now + max(NEIGH_VAR(neigh->parms, RETRANS_TIME),
+					 HZ/100);
 		}
 	} else {
 		/* NUD_PROBE|NUD_INCOMPLETE */
-		next = now + NEIGH_VAR(neigh->parms, RETRANS_TIME);
+		next = now + max(NEIGH_VAR(neigh->parms, RETRANS_TIME), HZ/100);
 	}
 
 	if ((neigh->nud_state & (NUD_INCOMPLETE | NUD_PROBE)) &&
@@ -1125,7 +1126,7 @@ int __neigh_event_send(struct neighbour *neigh, struct sk_buff *skb)
 			neigh->nud_state     = NUD_INCOMPLETE;
 			neigh->updated = now;
 			next = now + max(NEIGH_VAR(neigh->parms, RETRANS_TIME),
-					 HZ/2);
+					 HZ/100);
 			neigh_add_timer(neigh, next);
 			immediate_probe = true;
 		} else {
@@ -1427,7 +1428,8 @@ void __neigh_set_probe_once(struct neighbour *neigh)
 	neigh->nud_state = NUD_INCOMPLETE;
 	atomic_set(&neigh->probes, neigh_max_probes(neigh));
 	neigh_add_timer(neigh,
-			jiffies + NEIGH_VAR(neigh->parms, RETRANS_TIME));
+			jiffies + max(NEIGH_VAR(neigh->parms, RETRANS_TIME),
+				      HZ/100));
 }
 EXPORT_SYMBOL(__neigh_set_probe_once);
 
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index cf021573..4773ad6 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -80,7 +80,7 @@ static ssize_t netdev_store(struct device *dev, struct device_attribute *attr,
 	struct net_device *netdev = to_net_dev(dev);
 	struct net *net = dev_net(netdev);
 	unsigned long new;
-	int ret = -EINVAL;
+	int ret;
 
 	if (!ns_capable(net->user_ns, CAP_NET_ADMIN))
 		return -EPERM;
diff --git a/net/core/sock.c b/net/core/sock.c
index da32d9b..90509c3 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -574,7 +574,7 @@ static int sock_setbindtodevice_locked(struct sock *sk, int ifindex)
 
 	/* Sorry... */
 	ret = -EPERM;
-	if (!ns_capable(net->user_ns, CAP_NET_RAW))
+	if (sk->sk_bound_dev_if && !ns_capable(net->user_ns, CAP_NET_RAW))
 		goto out;
 
 	ret = -EINVAL;
@@ -1872,7 +1872,7 @@ struct sock *sk_clone_lock(const struct sock *sk, const gfp_t priority)
 		 * as not suitable for copying when cloning.
 		 */
 		if (sk_user_data_is_nocopy(newsk))
-			RCU_INIT_POINTER(newsk->sk_user_data, NULL);
+			newsk->sk_user_data = NULL;
 
 		newsk->sk_err	   = 0;
 		newsk->sk_err_soft = 0;
diff --git a/net/dns_resolver/dns_key.c b/net/dns_resolver/dns_key.c
index 3e1a906..ad53eb3 100644
--- a/net/dns_resolver/dns_key.c
+++ b/net/dns_resolver/dns_key.c
@@ -302,7 +302,7 @@ static void dns_resolver_describe(const struct key *key, struct seq_file *m)
  * - the key's semaphore is read-locked
  */
 static long dns_resolver_read(const struct key *key,
-			      char __user *buffer, size_t buflen)
+			      char *buffer, size_t buflen)
 {
 	int err = PTR_ERR(key->payload.data[dns_key_error]);
 
diff --git a/net/dsa/port.c b/net/dsa/port.c
index 231b2d4..a58fdd3 100644
--- a/net/dsa/port.c
+++ b/net/dsa/port.c
@@ -670,11 +670,16 @@ int dsa_port_link_register_of(struct dsa_port *dp)
 {
 	struct dsa_switch *ds = dp->ds;
 	struct device_node *phy_np;
+	int port = dp->index;
 
 	if (!ds->ops->adjust_link) {
 		phy_np = of_parse_phandle(dp->dn, "phy-handle", 0);
-		if (of_phy_is_fixed_link(dp->dn) || phy_np)
+		if (of_phy_is_fixed_link(dp->dn) || phy_np) {
+			if (ds->ops->phylink_mac_link_down)
+				ds->ops->phylink_mac_link_down(ds, port,
+					MLO_AN_FIXED, PHY_INTERFACE_MODE_NA);
 			return dsa_port_phylink_register(dp);
+		}
 		return 0;
 	}
 
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index 5390ff5..e94eb1aa 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -1338,7 +1338,7 @@ static void dsa_hw_port_list_free(struct list_head *hw_port_list)
 }
 
 /* Make the hardware datapath to/from @dev limited to a common MTU */
-void dsa_bridge_mtu_normalization(struct dsa_port *dp)
+static void dsa_bridge_mtu_normalization(struct dsa_port *dp)
 {
 	struct list_head hw_port_list;
 	struct dsa_switch_tree *dst;
diff --git a/net/hsr/hsr_netlink.c b/net/hsr/hsr_netlink.c
index 5465a39..1decb25 100644
--- a/net/hsr/hsr_netlink.c
+++ b/net/hsr/hsr_netlink.c
@@ -69,10 +69,16 @@ static int hsr_newlink(struct net *src_net, struct net_device *dev,
 	else
 		multicast_spec = nla_get_u8(data[IFLA_HSR_MULTICAST_SPEC]);
 
-	if (!data[IFLA_HSR_VERSION])
+	if (!data[IFLA_HSR_VERSION]) {
 		hsr_version = 0;
-	else
+	} else {
 		hsr_version = nla_get_u8(data[IFLA_HSR_VERSION]);
+		if (hsr_version > 1) {
+			NL_SET_ERR_MSG_MOD(extack,
+					   "Only versions 0..1 are supported");
+			return -EINVAL;
+		}
+	}
 
 	return hsr_dev_finalize(dev, link, multicast_spec, hsr_version, extack);
 }
diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c
index 30fa42f..c0dd561 100644
--- a/net/ipv4/devinet.c
+++ b/net/ipv4/devinet.c
@@ -614,12 +614,15 @@ struct in_ifaddr *inet_ifa_byprefix(struct in_device *in_dev, __be32 prefix,
 	return NULL;
 }
 
-static int ip_mc_config(struct sock *sk, bool join, const struct in_ifaddr *ifa)
+static int ip_mc_autojoin_config(struct net *net, bool join,
+				 const struct in_ifaddr *ifa)
 {
+#if defined(CONFIG_IP_MULTICAST)
 	struct ip_mreqn mreq = {
 		.imr_multiaddr.s_addr = ifa->ifa_address,
 		.imr_ifindex = ifa->ifa_dev->dev->ifindex,
 	};
+	struct sock *sk = net->ipv4.mc_autojoin_sk;
 	int ret;
 
 	ASSERT_RTNL();
@@ -632,6 +635,9 @@ static int ip_mc_config(struct sock *sk, bool join, const struct in_ifaddr *ifa)
 	release_sock(sk);
 
 	return ret;
+#else
+	return -EOPNOTSUPP;
+#endif
 }
 
 static int inet_rtm_deladdr(struct sk_buff *skb, struct nlmsghdr *nlh,
@@ -675,7 +681,7 @@ static int inet_rtm_deladdr(struct sk_buff *skb, struct nlmsghdr *nlh,
 			continue;
 
 		if (ipv4_is_multicast(ifa->ifa_address))
-			ip_mc_config(net->ipv4.mc_autojoin_sk, false, ifa);
+			ip_mc_autojoin_config(net, false, ifa);
 		__inet_del_ifa(in_dev, ifap, 1, nlh, NETLINK_CB(skb).portid);
 		return 0;
 	}
@@ -940,8 +946,7 @@ static int inet_rtm_newaddr(struct sk_buff *skb, struct nlmsghdr *nlh,
 		 */
 		set_ifa_lifetime(ifa, valid_lft, prefered_lft);
 		if (ifa->ifa_flags & IFA_F_MCAUTOJOIN) {
-			int ret = ip_mc_config(net->ipv4.mc_autojoin_sk,
-					       true, ifa);
+			int ret = ip_mc_autojoin_config(net, true, ifa);
 
 			if (ret < 0) {
 				inet_free_ifa(ifa);
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index a11fd4d..24e319d 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -1357,7 +1357,7 @@ static int ipv6_create_tempaddr(struct inet6_ifaddr *ifp,
 
 	regen_advance = idev->cnf.regen_max_retry *
 			idev->cnf.dad_transmits *
-			NEIGH_VAR(idev->nd_parms, RETRANS_TIME) / HZ;
+			max(NEIGH_VAR(idev->nd_parms, RETRANS_TIME), HZ/100) / HZ;
 
 	/* recalculate max_desync_factor each time and update
 	 * idev->desync_factor if it's larger
@@ -3298,6 +3298,10 @@ static void addrconf_addr_gen(struct inet6_dev *idev, bool prefix_route)
 	if (netif_is_l3_master(idev->dev))
 		return;
 
+	/* no link local addresses on devices flagged as slaves */
+	if (idev->dev->flags & IFF_SLAVE)
+		return;
+
 	ipv6_addr_set(&addr, htonl(0xFE800000), 0, 0, 0);
 
 	switch (idev->cnf.addr_gen_mode) {
@@ -4117,7 +4121,8 @@ static void addrconf_dad_work(struct work_struct *w)
 
 	ifp->dad_probes--;
 	addrconf_mod_dad_work(ifp,
-			      NEIGH_VAR(ifp->idev->nd_parms, RETRANS_TIME));
+			      max(NEIGH_VAR(ifp->idev->nd_parms, RETRANS_TIME),
+				  HZ/100));
 	spin_unlock(&ifp->lock);
 	write_unlock_bh(&idev->lock);
 
@@ -4523,7 +4528,7 @@ static void addrconf_verify_rtnl(void)
 				   !(ifp->flags&IFA_F_TENTATIVE)) {
 				unsigned long regen_advance = ifp->idev->cnf.regen_max_retry *
 					ifp->idev->cnf.dad_transmits *
-					NEIGH_VAR(ifp->idev->nd_parms, RETRANS_TIME) / HZ;
+					max(NEIGH_VAR(ifp->idev->nd_parms, RETRANS_TIME), HZ/100) / HZ;
 
 				if (age >= ifp->prefered_lft - regen_advance) {
 					struct inet6_ifaddr *ifpub = ifp->ifpub;
diff --git a/net/ipv6/icmp.c b/net/ipv6/icmp.c
index 2688f3e..fc50003 100644
--- a/net/ipv6/icmp.c
+++ b/net/ipv6/icmp.c
@@ -229,6 +229,25 @@ static bool icmpv6_xrlim_allow(struct sock *sk, u8 type,
 	return res;
 }
 
+static bool icmpv6_rt_has_prefsrc(struct sock *sk, u8 type,
+				  struct flowi6 *fl6)
+{
+	struct net *net = sock_net(sk);
+	struct dst_entry *dst;
+	bool res = false;
+
+	dst = ip6_route_output(net, sk, fl6);
+	if (!dst->error) {
+		struct rt6_info *rt = (struct rt6_info *)dst;
+		struct in6_addr prefsrc;
+
+		rt6_get_prefsrc(rt, &prefsrc);
+		res = !ipv6_addr_any(&prefsrc);
+	}
+	dst_release(dst);
+	return res;
+}
+
 /*
  *	an inline helper for the "simple" if statement below
  *	checks if parameter problem report is caused by an
@@ -527,7 +546,7 @@ static void icmp6_send(struct sk_buff *skb, u8 type, u8 code, __u32 info,
 		saddr = force_saddr;
 	if (saddr) {
 		fl6.saddr = *saddr;
-	} else {
+	} else if (!icmpv6_rt_has_prefsrc(sk, type, &fl6)) {
 		/* select a more meaningful saddr from input if */
 		struct net_device *in_netdev;
 
diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c
index 6ffa153..1ecd4e9 100644
--- a/net/ipv6/ndisc.c
+++ b/net/ipv6/ndisc.c
@@ -1359,8 +1359,8 @@ static void ndisc_router_discovery(struct sk_buff *skb)
 
 		if (rtime && rtime/1000 < MAX_SCHEDULE_TIMEOUT/HZ) {
 			rtime = (rtime*HZ)/1000;
-			if (rtime < HZ/10)
-				rtime = HZ/10;
+			if (rtime < HZ/100)
+				rtime = HZ/100;
 			NEIGH_VAR_SET(in6_dev->nd_parms, RETRANS_TIME, rtime);
 			in6_dev->tstamp = jiffies;
 			send_ifinfo_notify = true;
diff --git a/net/ipv6/rpl.c b/net/ipv6/rpl.c
index dc4f20e..d38b476 100644
--- a/net/ipv6/rpl.c
+++ b/net/ipv6/rpl.c
@@ -48,7 +48,7 @@ void ipv6_rpl_srh_decompress(struct ipv6_rpl_sr_hdr *outhdr,
 	outhdr->cmpri = 0;
 	outhdr->cmpre = 0;
 
-	for (i = 0; i <= n; i++)
+	for (i = 0; i < n; i++)
 		ipv6_rpl_addr_decompress(&outhdr->rpl_segaddr[i], daddr,
 					 ipv6_rpl_segdata_pos(inhdr, i),
 					 inhdr->cmpri);
@@ -66,7 +66,7 @@ static unsigned char ipv6_rpl_srh_calc_cmpri(const struct ipv6_rpl_sr_hdr *inhdr
 	int i;
 
 	for (plen = 0; plen < sizeof(*daddr); plen++) {
-		for (i = 0; i <= n; i++) {
+		for (i = 0; i < n; i++) {
 			if (daddr->s6_addr[plen] !=
 			    inhdr->rpl_segaddr[i].s6_addr[plen])
 				return plen;
@@ -114,7 +114,7 @@ void ipv6_rpl_srh_compress(struct ipv6_rpl_sr_hdr *outhdr,
 	outhdr->cmpri = cmpri;
 	outhdr->cmpre = cmpre;
 
-	for (i = 0; i <= n; i++)
+	for (i = 0; i < n; i++)
 		ipv6_rpl_addr_compress(ipv6_rpl_segdata_pos(outhdr, i),
 				       &inhdr->rpl_segaddr[i], cmpri);
 
diff --git a/net/ipv6/rpl_iptunnel.c b/net/ipv6/rpl_iptunnel.c
index a49ddc6..c3ececd 100644
--- a/net/ipv6/rpl_iptunnel.c
+++ b/net/ipv6/rpl_iptunnel.c
@@ -210,7 +210,7 @@ static int rpl_output(struct net *net, struct sock *sk, struct sk_buff *skb)
 	struct dst_entry *orig_dst = skb_dst(skb);
 	struct dst_entry *dst = NULL;
 	struct rpl_lwt *rlwt;
-	int err = -EINVAL;
+	int err;
 
 	rlwt = rpl_lwt_lwtunnel(orig_dst->lwtstate);
 
diff --git a/net/ipv6/seg6.c b/net/ipv6/seg6.c
index 75421a4..4c7e0a27 100644
--- a/net/ipv6/seg6.c
+++ b/net/ipv6/seg6.c
@@ -434,7 +434,7 @@ static struct genl_family seg6_genl_family __ro_after_init = {
 
 int __init seg6_init(void)
 {
-	int err = -ENOMEM;
+	int err;
 
 	err = genl_register_family(&seg6_genl_family);
 	if (err)
diff --git a/net/l2tp/l2tp_netlink.c b/net/l2tp/l2tp_netlink.c
index f5a9bdc..ebb381c 100644
--- a/net/l2tp/l2tp_netlink.c
+++ b/net/l2tp/l2tp_netlink.c
@@ -920,51 +920,51 @@ static const struct genl_ops l2tp_nl_ops[] = {
 		.cmd = L2TP_CMD_TUNNEL_CREATE,
 		.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
 		.doit = l2tp_nl_cmd_tunnel_create,
-		.flags = GENL_ADMIN_PERM,
+		.flags = GENL_UNS_ADMIN_PERM,
 	},
 	{
 		.cmd = L2TP_CMD_TUNNEL_DELETE,
 		.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
 		.doit = l2tp_nl_cmd_tunnel_delete,
-		.flags = GENL_ADMIN_PERM,
+		.flags = GENL_UNS_ADMIN_PERM,
 	},
 	{
 		.cmd = L2TP_CMD_TUNNEL_MODIFY,
 		.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
 		.doit = l2tp_nl_cmd_tunnel_modify,
-		.flags = GENL_ADMIN_PERM,
+		.flags = GENL_UNS_ADMIN_PERM,
 	},
 	{
 		.cmd = L2TP_CMD_TUNNEL_GET,
 		.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
 		.doit = l2tp_nl_cmd_tunnel_get,
 		.dumpit = l2tp_nl_cmd_tunnel_dump,
-		.flags = GENL_ADMIN_PERM,
+		.flags = GENL_UNS_ADMIN_PERM,
 	},
 	{
 		.cmd = L2TP_CMD_SESSION_CREATE,
 		.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
 		.doit = l2tp_nl_cmd_session_create,
-		.flags = GENL_ADMIN_PERM,
+		.flags = GENL_UNS_ADMIN_PERM,
 	},
 	{
 		.cmd = L2TP_CMD_SESSION_DELETE,
 		.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
 		.doit = l2tp_nl_cmd_session_delete,
-		.flags = GENL_ADMIN_PERM,
+		.flags = GENL_UNS_ADMIN_PERM,
 	},
 	{
 		.cmd = L2TP_CMD_SESSION_MODIFY,
 		.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
 		.doit = l2tp_nl_cmd_session_modify,
-		.flags = GENL_ADMIN_PERM,
+		.flags = GENL_UNS_ADMIN_PERM,
 	},
 	{
 		.cmd = L2TP_CMD_SESSION_GET,
 		.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
 		.doit = l2tp_nl_cmd_session_get,
 		.dumpit = l2tp_nl_cmd_session_dump,
-		.flags = GENL_ADMIN_PERM,
+		.flags = GENL_UNS_ADMIN_PERM,
 	},
 };
 
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 8345926..0e9ad60 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -1069,7 +1069,7 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
 		local->hw.wiphy->signal_type = CFG80211_SIGNAL_TYPE_UNSPEC;
 		if (hw->max_signal <= 0) {
 			result = -EINVAL;
-			goto fail_wiphy_register;
+			goto fail_workqueue;
 		}
 	}
 
@@ -1135,7 +1135,7 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
 
 	result = ieee80211_init_cipher_suites(local);
 	if (result < 0)
-		goto fail_wiphy_register;
+		goto fail_workqueue;
 
 	if (!local->ops->remain_on_channel)
 		local->hw.wiphy->max_remain_on_channel_duration = 5000;
@@ -1161,10 +1161,6 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
 
 	local->hw.wiphy->max_num_csa_counters = IEEE80211_MAX_CSA_COUNTERS_NUM;
 
-	result = wiphy_register(local->hw.wiphy);
-	if (result < 0)
-		goto fail_wiphy_register;
-
 	/*
 	 * We use the number of queues for feature tests (QoS, HT) internally
 	 * so restrict them appropriately.
@@ -1217,9 +1213,9 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
 		goto fail_flows;
 
 	rtnl_lock();
-
 	result = ieee80211_init_rate_ctrl_alg(local,
 					      hw->rate_control_algorithm);
+	rtnl_unlock();
 	if (result < 0) {
 		wiphy_debug(local->hw.wiphy,
 			    "Failed to initialize rate control algorithm\n");
@@ -1273,6 +1269,12 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
 		local->sband_allocated |= BIT(band);
 	}
 
+	result = wiphy_register(local->hw.wiphy);
+	if (result < 0)
+		goto fail_wiphy_register;
+
+	rtnl_lock();
+
 	/* add one default STA interface if supported */
 	if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_STATION) &&
 	    !ieee80211_hw_check(hw, NO_AUTO_VIF)) {
@@ -1312,17 +1314,17 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
 #if defined(CONFIG_INET) || defined(CONFIG_IPV6)
  fail_ifa:
 #endif
+	wiphy_unregister(local->hw.wiphy);
+ fail_wiphy_register:
 	rtnl_lock();
 	rate_control_deinitialize(local);
 	ieee80211_remove_interfaces(local);
- fail_rate:
 	rtnl_unlock();
+ fail_rate:
  fail_flows:
 	ieee80211_led_exit(local);
 	destroy_workqueue(local->workqueue);
  fail_workqueue:
-	wiphy_unregister(local->hw.wiphy);
- fail_wiphy_register:
 	if (local->wiphy_ciphers_allocated)
 		kfree(local->hw.wiphy->cipher_suites);
 	kfree(local->int_scan_req);
@@ -1372,8 +1374,8 @@ void ieee80211_unregister_hw(struct ieee80211_hw *hw)
 	skb_queue_purge(&local->skb_queue_unreliable);
 	skb_queue_purge(&local->skb_queue_tdls_chsw);
 
-	destroy_workqueue(local->workqueue);
 	wiphy_unregister(local->hw.wiphy);
+	destroy_workqueue(local->workqueue);
 	ieee80211_led_exit(local);
 	kfree(local->int_scan_req);
 }
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index d09b3c7..36978a0 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -1257,15 +1257,15 @@ static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
 		    sdata->u.mesh.mshcfg.rssi_threshold < rx_status->signal)
 			mesh_neighbour_update(sdata, mgmt->sa, &elems,
 					      rx_status);
+
+		if (ifmsh->csa_role != IEEE80211_MESH_CSA_ROLE_INIT &&
+		    !sdata->vif.csa_active)
+			ieee80211_mesh_process_chnswitch(sdata, &elems, true);
 	}
 
 	if (ifmsh->sync_ops)
 		ifmsh->sync_ops->rx_bcn_presp(sdata,
 			stype, mgmt, &elems, rx_status);
-
-	if (ifmsh->csa_role != IEEE80211_MESH_CSA_ROLE_INIT &&
-	    !sdata->vif.csa_active)
-		ieee80211_mesh_process_chnswitch(sdata, &elems, true);
 }
 
 int ieee80211_mesh_finish_csa(struct ieee80211_sub_if_data *sdata)
@@ -1373,6 +1373,9 @@ static void mesh_rx_csa_frame(struct ieee80211_sub_if_data *sdata,
 	ieee802_11_parse_elems(pos, len - baselen, true, &elems,
 			       mgmt->bssid, NULL);
 
+	if (!mesh_matches_local(sdata, &elems))
+		return;
+
 	ifmsh->chsw_ttl = elems.mesh_chansw_params_ie->mesh_ttl;
 	if (!--ifmsh->chsw_ttl)
 		fwd_csa = false;
diff --git a/net/mptcp/options.c b/net/mptcp/options.c
index bd220ee..faf5758 100644
--- a/net/mptcp/options.c
+++ b/net/mptcp/options.c
@@ -4,6 +4,8 @@
  * Copyright (c) 2017 - 2019, Intel Corporation.
  */
 
+#define pr_fmt(fmt) "MPTCP: " fmt
+
 #include <linux/kernel.h>
 #include <net/tcp.h>
 #include <net/mptcp.h>
diff --git a/net/mptcp/pm.c b/net/mptcp/pm.c
index 064639f..977d9c8 100644
--- a/net/mptcp/pm.c
+++ b/net/mptcp/pm.c
@@ -3,6 +3,8 @@
  *
  * Copyright (c) 2019, Intel Corporation.
  */
+#define pr_fmt(fmt) "MPTCP: " fmt
+
 #include <linux/kernel.h>
 #include <net/tcp.h>
 #include <net/mptcp.h>
diff --git a/net/mptcp/pm_netlink.c b/net/mptcp/pm_netlink.c
index a0ce7f3..86d61ab 100644
--- a/net/mptcp/pm_netlink.c
+++ b/net/mptcp/pm_netlink.c
@@ -4,6 +4,8 @@
  * Copyright (c) 2020, Red Hat, Inc.
  */
 
+#define pr_fmt(fmt) "MPTCP: " fmt
+
 #include <linux/inet.h>
 #include <linux/kernel.h>
 #include <net/tcp.h>
diff --git a/net/mptcp/protocol.c b/net/mptcp/protocol.c
index 1833bc1..9936e33 100644
--- a/net/mptcp/protocol.c
+++ b/net/mptcp/protocol.c
@@ -57,19 +57,47 @@ static bool __mptcp_needs_tcp_fallback(const struct mptcp_sock *msk)
 	return msk->first && !sk_is_mptcp(msk->first);
 }
 
+static struct socket *mptcp_is_tcpsk(struct sock *sk)
+{
+	struct socket *sock = sk->sk_socket;
+
+	if (sock->sk != sk)
+		return NULL;
+
+	if (unlikely(sk->sk_prot == &tcp_prot)) {
+		/* we are being invoked after mptcp_accept() has
+		 * accepted a non-mp-capable flow: sk is a tcp_sk,
+		 * not an mptcp one.
+		 *
+		 * Hand the socket over to tcp so all further socket ops
+		 * bypass mptcp.
+		 */
+		sock->ops = &inet_stream_ops;
+		return sock;
+#if IS_ENABLED(CONFIG_MPTCP_IPV6)
+	} else if (unlikely(sk->sk_prot == &tcpv6_prot)) {
+		sock->ops = &inet6_stream_ops;
+		return sock;
+#endif
+	}
+
+	return NULL;
+}
+
 static struct socket *__mptcp_tcp_fallback(struct mptcp_sock *msk)
 {
+	struct socket *sock;
+
 	sock_owned_by_me((const struct sock *)msk);
 
+	sock = mptcp_is_tcpsk((struct sock *)msk);
+	if (unlikely(sock))
+		return sock;
+
 	if (likely(!__mptcp_needs_tcp_fallback(msk)))
 		return NULL;
 
-	if (msk->subflow) {
-		release_sock((struct sock *)msk);
-		return msk->subflow;
-	}
-
-	return NULL;
+	return msk->subflow;
 }
 
 static bool __mptcp_can_create_subflow(const struct mptcp_sock *msk)
@@ -84,6 +112,10 @@ static struct socket *__mptcp_socket_create(struct mptcp_sock *msk, int state)
 	struct socket *ssock;
 	int err;
 
+	ssock = __mptcp_tcp_fallback(msk);
+	if (unlikely(ssock))
+		return ssock;
+
 	ssock = __mptcp_nmpc_socket(msk);
 	if (ssock)
 		goto set_state;
@@ -121,6 +153,27 @@ static void __mptcp_move_skb(struct mptcp_sock *msk, struct sock *ssk,
 	MPTCP_SKB_CB(skb)->offset = offset;
 }
 
+/* both sockets must be locked */
+static bool mptcp_subflow_dsn_valid(const struct mptcp_sock *msk,
+				    struct sock *ssk)
+{
+	struct mptcp_subflow_context *subflow = mptcp_subflow_ctx(ssk);
+	u64 dsn = mptcp_subflow_get_mapped_dsn(subflow);
+
+	/* revalidate data sequence number.
+	 *
+	 * mptcp_subflow_data_available() is usually called
+	 * without msk lock.  Its unlikely (but possible)
+	 * that msk->ack_seq has been advanced since the last
+	 * call found in-sequence data.
+	 */
+	if (likely(dsn == msk->ack_seq))
+		return true;
+
+	subflow->data_avail = 0;
+	return mptcp_subflow_data_available(ssk);
+}
+
 static bool __mptcp_move_skbs_from_subflow(struct mptcp_sock *msk,
 					   struct sock *ssk,
 					   unsigned int *bytes)
@@ -132,6 +185,11 @@ static bool __mptcp_move_skbs_from_subflow(struct mptcp_sock *msk,
 	struct tcp_sock *tp;
 	bool done = false;
 
+	if (!mptcp_subflow_dsn_valid(msk, ssk)) {
+		*bytes = 0;
+		return false;
+	}
+
 	if (!(sk->sk_userlocks & SOCK_RCVBUF_LOCK)) {
 		int rcvbuf = max(ssk->sk_rcvbuf, sk->sk_rcvbuf);
 
@@ -290,6 +348,15 @@ void mptcp_data_acked(struct sock *sk)
 		sock_hold(sk);
 }
 
+void mptcp_subflow_eof(struct sock *sk)
+{
+	struct mptcp_sock *msk = mptcp_sk(sk);
+
+	if (!test_and_set_bit(MPTCP_WORK_EOF, &msk->flags) &&
+	    schedule_work(&msk->work))
+		sock_hold(sk);
+}
+
 static void mptcp_stop_timer(struct sock *sk)
 {
 	struct inet_connection_sock *icsk = inet_csk(sk);
@@ -662,9 +729,10 @@ static int mptcp_sendmsg(struct sock *sk, struct msghdr *msg, size_t len)
 			goto out;
 	}
 
+fallback:
 	ssock = __mptcp_tcp_fallback(msk);
 	if (unlikely(ssock)) {
-fallback:
+		release_sock(sk);
 		pr_debug("fallback passthrough");
 		ret = sock_sendmsg(ssock, msg);
 		return ret >= 0 ? ret + copied : (copied ? copied : ret);
@@ -697,8 +765,14 @@ static int mptcp_sendmsg(struct sock *sk, struct msghdr *msg, size_t len)
 		if (ret < 0)
 			break;
 		if (ret == 0 && unlikely(__mptcp_needs_tcp_fallback(msk))) {
+			/* Can happen for passive sockets:
+			 * 3WHS negotiated MPTCP, but first packet after is
+			 * plain TCP (e.g. due to middlebox filtering unknown
+			 * options).
+			 *
+			 * Fall back to TCP.
+			 */
 			release_sock(ssk);
-			ssock = __mptcp_tcp_fallback(msk);
 			goto fallback;
 		}
 
@@ -811,6 +885,7 @@ static int mptcp_recvmsg(struct sock *sk, struct msghdr *msg, size_t len,
 	ssock = __mptcp_tcp_fallback(msk);
 	if (unlikely(ssock)) {
 fallback:
+		release_sock(sk);
 		pr_debug("fallback-read subflow=%p",
 			 mptcp_subflow_ctx(ssock->sk));
 		copied = sock_recvmsg(ssock, msg, flags);
@@ -994,6 +1069,27 @@ static unsigned int mptcp_sync_mss(struct sock *sk, u32 pmtu)
 	return 0;
 }
 
+static void mptcp_check_for_eof(struct mptcp_sock *msk)
+{
+	struct mptcp_subflow_context *subflow;
+	struct sock *sk = (struct sock *)msk;
+	int receivers = 0;
+
+	mptcp_for_each_subflow(msk, subflow)
+		receivers += !subflow->rx_eof;
+
+	if (!receivers && !(sk->sk_shutdown & RCV_SHUTDOWN)) {
+		/* hopefully temporary hack: propagate shutdown status
+		 * to msk, when all subflows agree on it
+		 */
+		sk->sk_shutdown |= RCV_SHUTDOWN;
+
+		smp_mb__before_atomic(); /* SHUTDOWN must be visible first */
+		set_bit(MPTCP_DATA_READY, &msk->flags);
+		sk->sk_data_ready(sk);
+	}
+}
+
 static void mptcp_worker(struct work_struct *work)
 {
 	struct mptcp_sock *msk = container_of(work, struct mptcp_sock, work);
@@ -1010,6 +1106,9 @@ static void mptcp_worker(struct work_struct *work)
 	__mptcp_flush_join_list(msk);
 	__mptcp_move_skbs(msk);
 
+	if (test_and_clear_bit(MPTCP_WORK_EOF, &msk->flags))
+		mptcp_check_for_eof(msk);
+
 	if (!test_and_clear_bit(MPTCP_WORK_RTX, &msk->flags))
 		goto unlock;
 
@@ -1371,12 +1470,11 @@ static int mptcp_setsockopt(struct sock *sk, int level, int optname,
 	 */
 	lock_sock(sk);
 	ssock = __mptcp_tcp_fallback(msk);
+	release_sock(sk);
 	if (ssock)
 		return tcp_setsockopt(ssock->sk, level, optname, optval,
 				      optlen);
 
-	release_sock(sk);
-
 	return -EOPNOTSUPP;
 }
 
@@ -1396,12 +1494,11 @@ static int mptcp_getsockopt(struct sock *sk, int level, int optname,
 	 */
 	lock_sock(sk);
 	ssock = __mptcp_tcp_fallback(msk);
+	release_sock(sk);
 	if (ssock)
 		return tcp_getsockopt(ssock->sk, level, optname, optval,
 				      option);
 
-	release_sock(sk);
-
 	return -EOPNOTSUPP;
 }
 
@@ -1752,7 +1849,9 @@ static __poll_t mptcp_poll(struct file *file, struct socket *sock,
 
 	msk = mptcp_sk(sk);
 	lock_sock(sk);
-	ssock = __mptcp_nmpc_socket(msk);
+	ssock = __mptcp_tcp_fallback(msk);
+	if (!ssock)
+		ssock = __mptcp_nmpc_socket(msk);
 	if (ssock) {
 		mask = ssock->ops->poll(file, ssock, wait);
 		release_sock(sk);
@@ -1762,9 +1861,6 @@ static __poll_t mptcp_poll(struct file *file, struct socket *sock,
 	release_sock(sk);
 	sock_poll_wait(file, sock, wait);
 	lock_sock(sk);
-	ssock = __mptcp_tcp_fallback(msk);
-	if (unlikely(ssock))
-		return ssock->ops->poll(file, ssock, NULL);
 
 	if (test_bit(MPTCP_DATA_READY, &msk->flags))
 		mask = EPOLLIN | EPOLLRDNORM;
@@ -1783,11 +1879,17 @@ static int mptcp_shutdown(struct socket *sock, int how)
 {
 	struct mptcp_sock *msk = mptcp_sk(sock->sk);
 	struct mptcp_subflow_context *subflow;
+	struct socket *ssock;
 	int ret = 0;
 
 	pr_debug("sk=%p, how=%d", msk, how);
 
 	lock_sock(sock->sk);
+	ssock = __mptcp_tcp_fallback(msk);
+	if (ssock) {
+		release_sock(sock->sk);
+		return inet_shutdown(ssock, how);
+	}
 
 	if (how == SHUT_WR || how == SHUT_RDWR)
 		inet_sk_state_store(sock->sk, TCP_FIN_WAIT1);
diff --git a/net/mptcp/protocol.h b/net/mptcp/protocol.h
index f733c54..6744800 100644
--- a/net/mptcp/protocol.h
+++ b/net/mptcp/protocol.h
@@ -89,6 +89,7 @@
 #define MPTCP_DATA_READY	0
 #define MPTCP_SEND_SPACE	1
 #define MPTCP_WORK_RTX		2
+#define MPTCP_WORK_EOF		3
 
 static inline __be32 mptcp_option(u8 subopt, u8 len, u8 nib, u8 field)
 {
@@ -339,6 +340,7 @@ void mptcp_finish_connect(struct sock *sk);
 void mptcp_data_ready(struct sock *sk, struct sock *ssk);
 bool mptcp_finish_join(struct sock *sk);
 void mptcp_data_acked(struct sock *sk);
+void mptcp_subflow_eof(struct sock *sk);
 
 int mptcp_token_new_request(struct request_sock *req);
 void mptcp_token_destroy_request(u32 token);
diff --git a/net/mptcp/subflow.c b/net/mptcp/subflow.c
index b5180c8..50a8bea 100644
--- a/net/mptcp/subflow.c
+++ b/net/mptcp/subflow.c
@@ -994,8 +994,7 @@ static void subflow_state_change(struct sock *sk)
 	if (!(parent->sk_shutdown & RCV_SHUTDOWN) &&
 	    !subflow->rx_eof && subflow_is_done(sk)) {
 		subflow->rx_eof = 1;
-		parent->sk_shutdown |= RCV_SHUTDOWN;
-		__subflow_state_change(parent);
+		mptcp_subflow_eof(parent);
 	}
 }
 
diff --git a/net/mptcp/token.c b/net/mptcp/token.c
index 129a5ad..33352dd 100644
--- a/net/mptcp/token.c
+++ b/net/mptcp/token.c
@@ -40,7 +40,7 @@ static int token_used __read_mostly;
 
 /**
  * mptcp_token_new_request - create new key/idsn/token for subflow_request
- * @req - the request socket
+ * @req: the request socket
  *
  * This function is called when a new mptcp connection is coming in.
  *
@@ -80,7 +80,7 @@ int mptcp_token_new_request(struct request_sock *req)
 
 /**
  * mptcp_token_new_connect - create new key/idsn/token for subflow
- * @sk - the socket that will initiate a connection
+ * @sk: the socket that will initiate a connection
  *
  * This function is called when a new outgoing mptcp connection is
  * initiated.
@@ -125,6 +125,7 @@ int mptcp_token_new_connect(struct sock *sk)
 /**
  * mptcp_token_new_accept - insert token for later processing
  * @token: the token to insert to the tree
+ * @conn: the just cloned socket linked to the new connection
  *
  * Called when a SYN packet creates a new logical connection, i.e.
  * is not a join request.
@@ -169,7 +170,7 @@ struct mptcp_sock *mptcp_token_get_sock(u32 token)
 
 /**
  * mptcp_token_destroy_request - remove mptcp connection/token
- * @token - token of mptcp connection to remove
+ * @token: token of mptcp connection to remove
  *
  * Remove not-yet-fully-established incoming connection identified
  * by @token.
@@ -183,7 +184,7 @@ void mptcp_token_destroy_request(u32 token)
 
 /**
  * mptcp_token_destroy - remove mptcp connection/token
- * @token - token of mptcp connection to remove
+ * @token: token of mptcp connection to remove
  *
  * Remove the connection identified by @token.
  */
diff --git a/net/netfilter/Makefile b/net/netfilter/Makefile
index 292e71d..0e0ded8 100644
--- a/net/netfilter/Makefile
+++ b/net/netfilter/Makefile
@@ -83,7 +83,7 @@
 		  nft_set_pipapo.o
 
 ifdef CONFIG_X86_64
-ifneq (,$(findstring -DCONFIG_AS_AVX2=1,$(KBUILD_CFLAGS)))
+ifndef CONFIG_UML
 nf_tables-objs += nft_set_pipapo_avx2.o
 endif
 endif
diff --git a/net/netfilter/ipset/ip_set_core.c b/net/netfilter/ipset/ip_set_core.c
index 8dd1758..340cb95 100644
--- a/net/netfilter/ipset/ip_set_core.c
+++ b/net/netfilter/ipset/ip_set_core.c
@@ -86,7 +86,8 @@ find_set_type(const char *name, u8 family, u8 revision)
 {
 	struct ip_set_type *type;
 
-	list_for_each_entry_rcu(type, &ip_set_type_list, list)
+	list_for_each_entry_rcu(type, &ip_set_type_list, list,
+				lockdep_is_held(&ip_set_type_mutex))
 		if (STRNCMP(type->name, name) &&
 		    (type->family == family ||
 		     type->family == NFPROTO_UNSPEC) &&
diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index d0ab5ff..9780bd9 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -3291,7 +3291,7 @@ static const struct nft_set_type *nft_set_types[] = {
 	&nft_set_rhash_type,
 	&nft_set_bitmap_type,
 	&nft_set_rbtree_type,
-#if defined(CONFIG_X86_64) && defined(CONFIG_AS_AVX2)
+#if defined(CONFIG_X86_64) && !defined(CONFIG_UML)
 	&nft_set_pipapo_avx2_type,
 #endif
 	&nft_set_pipapo_type,
@@ -3542,6 +3542,7 @@ static int nf_tables_set_alloc_name(struct nft_ctx *ctx, struct nft_set *set,
 			continue;
 		if (!strcmp(set->name, i->name)) {
 			kfree(set->name);
+			set->name = NULL;
 			return -ENFILE;
 		}
 	}
@@ -3961,8 +3962,8 @@ static int nf_tables_newset(struct net *net, struct sock *nlsk,
 		if (flags & ~(NFT_SET_ANONYMOUS | NFT_SET_CONSTANT |
 			      NFT_SET_INTERVAL | NFT_SET_TIMEOUT |
 			      NFT_SET_MAP | NFT_SET_EVAL |
-			      NFT_SET_OBJECT))
-			return -EINVAL;
+			      NFT_SET_OBJECT | NFT_SET_CONCAT))
+			return -EOPNOTSUPP;
 		/* Only one of these operations is supported */
 		if ((flags & (NFT_SET_MAP | NFT_SET_OBJECT)) ==
 			     (NFT_SET_MAP | NFT_SET_OBJECT))
@@ -4000,7 +4001,7 @@ static int nf_tables_newset(struct net *net, struct sock *nlsk,
 		objtype = ntohl(nla_get_be32(nla[NFTA_SET_OBJ_TYPE]));
 		if (objtype == NFT_OBJECT_UNSPEC ||
 		    objtype > NFT_OBJECT_MAX)
-			return -EINVAL;
+			return -EOPNOTSUPP;
 	} else if (flags & NFT_SET_OBJECT)
 		return -EINVAL;
 	else
diff --git a/net/netfilter/nft_lookup.c b/net/netfilter/nft_lookup.c
index 1e70359..f1363b8 100644
--- a/net/netfilter/nft_lookup.c
+++ b/net/netfilter/nft_lookup.c
@@ -29,7 +29,7 @@ void nft_lookup_eval(const struct nft_expr *expr,
 {
 	const struct nft_lookup *priv = nft_expr_priv(expr);
 	const struct nft_set *set = priv->set;
-	const struct nft_set_ext *ext;
+	const struct nft_set_ext *ext = NULL;
 	bool found;
 
 	found = set->ops->lookup(nft_net(pkt), set, &regs->data[priv->sreg],
@@ -39,11 +39,13 @@ void nft_lookup_eval(const struct nft_expr *expr,
 		return;
 	}
 
-	if (set->flags & NFT_SET_MAP)
-		nft_data_copy(&regs->data[priv->dreg],
-			      nft_set_ext_data(ext), set->dlen);
+	if (ext) {
+		if (set->flags & NFT_SET_MAP)
+			nft_data_copy(&regs->data[priv->dreg],
+				      nft_set_ext_data(ext), set->dlen);
 
-	nft_set_elem_update_expr(ext, regs, pkt);
+		nft_set_elem_update_expr(ext, regs, pkt);
+	}
 }
 
 static const struct nla_policy nft_lookup_policy[NFTA_LOOKUP_MAX + 1] = {
diff --git a/net/netfilter/nft_set_bitmap.c b/net/netfilter/nft_set_bitmap.c
index 32f0fc8..2a81ea4 100644
--- a/net/netfilter/nft_set_bitmap.c
+++ b/net/netfilter/nft_set_bitmap.c
@@ -81,7 +81,6 @@ static bool nft_bitmap_lookup(const struct net *net, const struct nft_set *set,
 	u32 idx, off;
 
 	nft_bitmap_location(set, key, &idx, &off);
-	*ext = NULL;
 
 	return nft_bitmap_active(priv->bitmap, idx, off, genmask);
 }
diff --git a/net/netfilter/nft_set_pipapo.c b/net/netfilter/nft_set_pipapo.c
index 87aabf6..8b5acc6 100644
--- a/net/netfilter/nft_set_pipapo.c
+++ b/net/netfilter/nft_set_pipapo.c
@@ -2201,7 +2201,7 @@ const struct nft_set_type nft_set_pipapo_type = {
 	},
 };
 
-#if defined(CONFIG_X86_64) && defined(CONFIG_AS_AVX2)
+#if defined(CONFIG_X86_64) && !defined(CONFIG_UML)
 const struct nft_set_type nft_set_pipapo_avx2_type = {
 	.features	= NFT_SET_INTERVAL | NFT_SET_MAP | NFT_SET_OBJECT |
 			  NFT_SET_TIMEOUT,
diff --git a/net/netfilter/nft_set_pipapo_avx2.h b/net/netfilter/nft_set_pipapo_avx2.h
index 396caf7..394bcb7 100644
--- a/net/netfilter/nft_set_pipapo_avx2.h
+++ b/net/netfilter/nft_set_pipapo_avx2.h
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef _NFT_SET_PIPAPO_AVX2_H
 
-#ifdef CONFIG_AS_AVX2
+#if defined(CONFIG_X86_64) && !defined(CONFIG_UML)
 #include <asm/fpu/xstate.h>
 #define NFT_PIPAPO_ALIGN	(XSAVE_YMM_SIZE / BITS_PER_BYTE)
 
@@ -9,6 +9,6 @@ bool nft_pipapo_avx2_lookup(const struct net *net, const struct nft_set *set,
 			    const u32 *key, const struct nft_set_ext **ext);
 bool nft_pipapo_avx2_estimate(const struct nft_set_desc *desc, u32 features,
 			      struct nft_set_estimate *est);
-#endif /* CONFIG_AS_AVX2 */
+#endif /* defined(CONFIG_X86_64) && !defined(CONFIG_UML) */
 
 #endif /* _NFT_SET_PIPAPO_AVX2_H */
diff --git a/net/netfilter/nft_set_rbtree.c b/net/netfilter/nft_set_rbtree.c
index 3a5552e..3ffef45 100644
--- a/net/netfilter/nft_set_rbtree.c
+++ b/net/netfilter/nft_set_rbtree.c
@@ -218,27 +218,26 @@ static int __nft_rbtree_insert(const struct net *net, const struct nft_set *set,
 
 	/* Detect overlaps as we descend the tree. Set the flag in these cases:
 	 *
-	 * a1. |__ _ _?  >|__ _ _  (insert start after existing start)
-	 * a2. _ _ __>|  ?_ _ __|  (insert end before existing end)
-	 * a3. _ _ ___|  ?_ _ _>|  (insert end after existing end)
-	 * a4. >|__ _ _   _ _ __|  (insert start before existing end)
+	 * a1. _ _ __>|  ?_ _ __|  (insert end before existing end)
+	 * a2. _ _ ___|  ?_ _ _>|  (insert end after existing end)
+	 * a3. _ _ ___? >|_ _ __|  (insert start before existing end)
 	 *
 	 * and clear it later on, as we eventually reach the points indicated by
 	 * '?' above, in the cases described below. We'll always meet these
 	 * later, locally, due to tree ordering, and overlaps for the intervals
 	 * that are the closest together are always evaluated last.
 	 *
-	 * b1. |__ _ _!  >|__ _ _  (insert start after existing end)
-	 * b2. _ _ __>|  !_ _ __|  (insert end before existing start)
-	 * b3. !_____>|            (insert end after existing start)
+	 * b1. _ _ __>|  !_ _ __|  (insert end before existing start)
+	 * b2. _ _ ___|  !_ _ _>|  (insert end after existing start)
+	 * b3. _ _ ___! >|_ _ __|  (insert start after existing end)
 	 *
-	 * Case a4. resolves to b1.:
+	 * Case a3. resolves to b3.:
 	 * - if the inserted start element is the leftmost, because the '0'
 	 *   element in the tree serves as end element
 	 * - otherwise, if an existing end is found. Note that end elements are
 	 *   always inserted after corresponding start elements.
 	 *
-	 * For a new, rightmost pair of elements, we'll hit cases b1. and b3.,
+	 * For a new, rightmost pair of elements, we'll hit cases b3. and b2.,
 	 * in that order.
 	 *
 	 * The flag is also cleared in two special cases:
@@ -262,9 +261,9 @@ static int __nft_rbtree_insert(const struct net *net, const struct nft_set *set,
 			p = &parent->rb_left;
 
 			if (nft_rbtree_interval_start(new)) {
-				overlap = nft_rbtree_interval_start(rbe) &&
-					  nft_set_elem_active(&rbe->ext,
-							      genmask);
+				if (nft_rbtree_interval_end(rbe) &&
+				    nft_set_elem_active(&rbe->ext, genmask))
+					overlap = false;
 			} else {
 				overlap = nft_rbtree_interval_end(rbe) &&
 					  nft_set_elem_active(&rbe->ext,
diff --git a/net/netfilter/xt_IDLETIMER.c b/net/netfilter/xt_IDLETIMER.c
index 75bd0e5..7b2f359 100644
--- a/net/netfilter/xt_IDLETIMER.c
+++ b/net/netfilter/xt_IDLETIMER.c
@@ -346,6 +346,9 @@ static int idletimer_tg_checkentry_v1(const struct xt_tgchk_param *par)
 
 	pr_debug("checkentry targinfo%s\n", info->label);
 
+	if (info->send_nl_msg)
+		return -EOPNOTSUPP;
+
 	ret = idletimer_tg_helper((struct idletimer_tg_info *)info);
 	if(ret < 0)
 	{
diff --git a/net/openvswitch/flow_table.c b/net/openvswitch/flow_table.c
index fd8a01c..2398d72 100644
--- a/net/openvswitch/flow_table.c
+++ b/net/openvswitch/flow_table.c
@@ -462,12 +462,14 @@ static void flow_table_copy_flows(struct table_instance *old,
 		struct hlist_head *head = &old->buckets[i];
 
 		if (ufid)
-			hlist_for_each_entry(flow, head,
-					     ufid_table.node[old_ver])
+			hlist_for_each_entry_rcu(flow, head,
+						 ufid_table.node[old_ver],
+						 lockdep_ovsl_is_held())
 				ufid_table_instance_insert(new, flow);
 		else
-			hlist_for_each_entry(flow, head,
-					     flow_table.node[old_ver])
+			hlist_for_each_entry_rcu(flow, head,
+						 flow_table.node[old_ver],
+						 lockdep_ovsl_is_held())
 				table_instance_insert(new, flow);
 	}
 
diff --git a/net/qrtr/qrtr.c b/net/qrtr/qrtr.c
index e22092e..7ed31b5e 100644
--- a/net/qrtr/qrtr.c
+++ b/net/qrtr/qrtr.c
@@ -906,20 +906,21 @@ static int qrtr_sendmsg(struct socket *sock, struct msghdr *msg, size_t len)
 
 	node = NULL;
 	if (addr->sq_node == QRTR_NODE_BCAST) {
-		enqueue_fn = qrtr_bcast_enqueue;
-		if (addr->sq_port != QRTR_PORT_CTRL) {
+		if (addr->sq_port != QRTR_PORT_CTRL &&
+		    qrtr_local_nid != QRTR_NODE_BCAST) {
 			release_sock(sk);
 			return -ENOTCONN;
 		}
+		enqueue_fn = qrtr_bcast_enqueue;
 	} else if (addr->sq_node == ipc->us.sq_node) {
 		enqueue_fn = qrtr_local_enqueue;
 	} else {
-		enqueue_fn = qrtr_node_enqueue;
 		node = qrtr_node_lookup(addr->sq_node);
 		if (!node) {
 			release_sock(sk);
 			return -ECONNRESET;
 		}
+		enqueue_fn = qrtr_node_enqueue;
 	}
 
 	plen = (len + 3) & ~3;
diff --git a/net/rds/message.c b/net/rds/message.c
index 50f13f1..071a261 100644
--- a/net/rds/message.c
+++ b/net/rds/message.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2006 Oracle.  All rights reserved.
+ * Copyright (c) 2006, 2020 Oracle and/or its affiliates.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
@@ -162,12 +162,12 @@ static void rds_message_purge(struct rds_message *rm)
 	if (rm->rdma.op_active)
 		rds_rdma_free_op(&rm->rdma);
 	if (rm->rdma.op_rdma_mr)
-		rds_mr_put(rm->rdma.op_rdma_mr);
+		kref_put(&rm->rdma.op_rdma_mr->r_kref, __rds_put_mr_final);
 
 	if (rm->atomic.op_active)
 		rds_atomic_free_op(&rm->atomic);
 	if (rm->atomic.op_rdma_mr)
-		rds_mr_put(rm->atomic.op_rdma_mr);
+		kref_put(&rm->atomic.op_rdma_mr->r_kref, __rds_put_mr_final);
 }
 
 void rds_message_put(struct rds_message *rm)
@@ -308,26 +308,20 @@ struct rds_message *rds_message_alloc(unsigned int extra_len, gfp_t gfp)
 /*
  * RDS ops use this to grab SG entries from the rm's sg pool.
  */
-struct scatterlist *rds_message_alloc_sgs(struct rds_message *rm, int nents,
-					  int *ret)
+struct scatterlist *rds_message_alloc_sgs(struct rds_message *rm, int nents)
 {
 	struct scatterlist *sg_first = (struct scatterlist *) &rm[1];
 	struct scatterlist *sg_ret;
 
-	if (WARN_ON(!ret))
-		return NULL;
-
 	if (nents <= 0) {
 		pr_warn("rds: alloc sgs failed! nents <= 0\n");
-		*ret = -EINVAL;
-		return NULL;
+		return ERR_PTR(-EINVAL);
 	}
 
 	if (rm->m_used_sgs + nents > rm->m_total_sgs) {
 		pr_warn("rds: alloc sgs failed! total %d used %d nents %d\n",
 			rm->m_total_sgs, rm->m_used_sgs, nents);
-		*ret = -ENOMEM;
-		return NULL;
+		return ERR_PTR(-ENOMEM);
 	}
 
 	sg_ret = &sg_first[rm->m_used_sgs];
@@ -343,7 +337,6 @@ struct rds_message *rds_message_map_pages(unsigned long *page_addrs, unsigned in
 	unsigned int i;
 	int num_sgs = DIV_ROUND_UP(total_len, PAGE_SIZE);
 	int extra_bytes = num_sgs * sizeof(struct scatterlist);
-	int ret;
 
 	rm = rds_message_alloc(extra_bytes, GFP_NOWAIT);
 	if (!rm)
@@ -352,10 +345,10 @@ struct rds_message *rds_message_map_pages(unsigned long *page_addrs, unsigned in
 	set_bit(RDS_MSG_PAGEVEC, &rm->m_flags);
 	rm->m_inc.i_hdr.h_len = cpu_to_be32(total_len);
 	rm->data.op_nents = DIV_ROUND_UP(total_len, PAGE_SIZE);
-	rm->data.op_sg = rds_message_alloc_sgs(rm, num_sgs, &ret);
-	if (!rm->data.op_sg) {
+	rm->data.op_sg = rds_message_alloc_sgs(rm, num_sgs);
+	if (IS_ERR(rm->data.op_sg)) {
 		rds_message_put(rm);
-		return ERR_PTR(ret);
+		return ERR_CAST(rm->data.op_sg);
 	}
 
 	for (i = 0; i < rm->data.op_nents; ++i) {
diff --git a/net/rds/rdma.c b/net/rds/rdma.c
index 585e6b3..a7ae118 100644
--- a/net/rds/rdma.c
+++ b/net/rds/rdma.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2007, 2017 Oracle and/or its affiliates. All rights reserved.
+ * Copyright (c) 2007, 2020 Oracle and/or its affiliates.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
@@ -84,7 +84,7 @@ static struct rds_mr *rds_mr_tree_walk(struct rb_root *root, u64 key,
 	if (insert) {
 		rb_link_node(&insert->r_rb_node, parent, p);
 		rb_insert_color(&insert->r_rb_node, root);
-		refcount_inc(&insert->r_refcount);
+		kref_get(&insert->r_kref);
 	}
 	return NULL;
 }
@@ -99,10 +99,7 @@ static void rds_destroy_mr(struct rds_mr *mr)
 	unsigned long flags;
 
 	rdsdebug("RDS: destroy mr key is %x refcnt %u\n",
-			mr->r_key, refcount_read(&mr->r_refcount));
-
-	if (test_and_set_bit(RDS_MR_DEAD, &mr->r_state))
-		return;
+		 mr->r_key, kref_read(&mr->r_kref));
 
 	spin_lock_irqsave(&rs->rs_rdma_lock, flags);
 	if (!RB_EMPTY_NODE(&mr->r_rb_node))
@@ -115,8 +112,10 @@ static void rds_destroy_mr(struct rds_mr *mr)
 		mr->r_trans->free_mr(trans_private, mr->r_invalidate);
 }
 
-void __rds_put_mr_final(struct rds_mr *mr)
+void __rds_put_mr_final(struct kref *kref)
 {
+	struct rds_mr *mr = container_of(kref, struct rds_mr, r_kref);
+
 	rds_destroy_mr(mr);
 	kfree(mr);
 }
@@ -140,8 +139,7 @@ void rds_rdma_drop_keys(struct rds_sock *rs)
 		rb_erase(&mr->r_rb_node, &rs->rs_rdma_keys);
 		RB_CLEAR_NODE(&mr->r_rb_node);
 		spin_unlock_irqrestore(&rs->rs_rdma_lock, flags);
-		rds_destroy_mr(mr);
-		rds_mr_put(mr);
+		kref_put(&mr->r_kref, __rds_put_mr_final);
 		spin_lock_irqsave(&rs->rs_rdma_lock, flags);
 	}
 	spin_unlock_irqrestore(&rs->rs_rdma_lock, flags);
@@ -242,7 +240,7 @@ static int __rds_rdma_map(struct rds_sock *rs, struct rds_get_mr_args *args,
 		goto out;
 	}
 
-	refcount_set(&mr->r_refcount, 1);
+	kref_init(&mr->r_kref);
 	RB_CLEAR_NODE(&mr->r_rb_node);
 	mr->r_trans = rs->rs_transport;
 	mr->r_sock = rs;
@@ -343,7 +341,7 @@ static int __rds_rdma_map(struct rds_sock *rs, struct rds_get_mr_args *args,
 
 	rdsdebug("RDS: get_mr key is %x\n", mr->r_key);
 	if (mr_ret) {
-		refcount_inc(&mr->r_refcount);
+		kref_get(&mr->r_kref);
 		*mr_ret = mr;
 	}
 
@@ -351,7 +349,7 @@ static int __rds_rdma_map(struct rds_sock *rs, struct rds_get_mr_args *args,
 out:
 	kfree(pages);
 	if (mr)
-		rds_mr_put(mr);
+		kref_put(&mr->r_kref, __rds_put_mr_final);
 	return ret;
 }
 
@@ -434,13 +432,7 @@ int rds_free_mr(struct rds_sock *rs, char __user *optval, int optlen)
 	if (!mr)
 		return -EINVAL;
 
-	/*
-	 * call rds_destroy_mr() ourselves so that we're sure it's done by the time
-	 * we return.  If we let rds_mr_put() do it it might not happen until
-	 * someone else drops their ref.
-	 */
-	rds_destroy_mr(mr);
-	rds_mr_put(mr);
+	kref_put(&mr->r_kref, __rds_put_mr_final);
 	return 0;
 }
 
@@ -464,6 +456,14 @@ void rds_rdma_unuse(struct rds_sock *rs, u32 r_key, int force)
 		return;
 	}
 
+	/* Get a reference so that the MR won't go away before calling
+	 * sync_mr() below.
+	 */
+	kref_get(&mr->r_kref);
+
+	/* If it is going to be freed, remove it from the tree now so
+	 * that no other thread can find it and free it.
+	 */
 	if (mr->r_use_once || force) {
 		rb_erase(&mr->r_rb_node, &rs->rs_rdma_keys);
 		RB_CLEAR_NODE(&mr->r_rb_node);
@@ -477,12 +477,13 @@ void rds_rdma_unuse(struct rds_sock *rs, u32 r_key, int force)
 	if (mr->r_trans->sync_mr)
 		mr->r_trans->sync_mr(mr->r_trans_private, DMA_FROM_DEVICE);
 
+	/* Release the reference held above. */
+	kref_put(&mr->r_kref, __rds_put_mr_final);
+
 	/* If the MR was marked as invalidate, this will
 	 * trigger an async flush. */
-	if (zot_me) {
-		rds_destroy_mr(mr);
-		rds_mr_put(mr);
-	}
+	if (zot_me)
+		kref_put(&mr->r_kref, __rds_put_mr_final);
 }
 
 void rds_rdma_free_op(struct rm_rdma_op *ro)
@@ -490,7 +491,7 @@ void rds_rdma_free_op(struct rm_rdma_op *ro)
 	unsigned int i;
 
 	if (ro->op_odp_mr) {
-		rds_mr_put(ro->op_odp_mr);
+		kref_put(&ro->op_odp_mr->r_kref, __rds_put_mr_final);
 	} else {
 		for (i = 0; i < ro->op_nents; i++) {
 			struct page *page = sg_page(&ro->op_sg[i]);
@@ -664,9 +665,11 @@ int rds_cmsg_rdma_args(struct rds_sock *rs, struct rds_message *rm,
 	op->op_odp_mr = NULL;
 
 	WARN_ON(!nr_pages);
-	op->op_sg = rds_message_alloc_sgs(rm, nr_pages, &ret);
-	if (!op->op_sg)
+	op->op_sg = rds_message_alloc_sgs(rm, nr_pages);
+	if (IS_ERR(op->op_sg)) {
+		ret = PTR_ERR(op->op_sg);
 		goto out_pages;
+	}
 
 	if (op->op_notify || op->op_recverr) {
 		/* We allocate an uninitialized notifier here, because
@@ -730,7 +733,7 @@ int rds_cmsg_rdma_args(struct rds_sock *rs, struct rds_message *rm,
 				goto out_pages;
 			}
 			RB_CLEAR_NODE(&local_odp_mr->r_rb_node);
-			refcount_set(&local_odp_mr->r_refcount, 1);
+			kref_init(&local_odp_mr->r_kref);
 			local_odp_mr->r_trans = rs->rs_transport;
 			local_odp_mr->r_sock = rs;
 			local_odp_mr->r_trans_private =
@@ -827,7 +830,7 @@ int rds_cmsg_rdma_dest(struct rds_sock *rs, struct rds_message *rm,
 	if (!mr)
 		err = -EINVAL;	/* invalid r_key */
 	else
-		refcount_inc(&mr->r_refcount);
+		kref_get(&mr->r_kref);
 	spin_unlock_irqrestore(&rs->rs_rdma_lock, flags);
 
 	if (mr) {
@@ -905,9 +908,11 @@ int rds_cmsg_atomic(struct rds_sock *rs, struct rds_message *rm,
 	rm->atomic.op_silent = !!(args->flags & RDS_RDMA_SILENT);
 	rm->atomic.op_active = 1;
 	rm->atomic.op_recverr = rs->rs_recverr;
-	rm->atomic.op_sg = rds_message_alloc_sgs(rm, 1, &ret);
-	if (!rm->atomic.op_sg)
+	rm->atomic.op_sg = rds_message_alloc_sgs(rm, 1);
+	if (IS_ERR(rm->atomic.op_sg)) {
+		ret = PTR_ERR(rm->atomic.op_sg);
 		goto err;
+	}
 
 	/* verify 8 byte-aligned */
 	if (args->local_addr & 0x7) {
diff --git a/net/rds/rds.h b/net/rds/rds.h
index e4a6035..6019b0c 100644
--- a/net/rds/rds.h
+++ b/net/rds/rds.h
@@ -291,7 +291,7 @@ struct rds_incoming {
 
 struct rds_mr {
 	struct rb_node		r_rb_node;
-	refcount_t		r_refcount;
+	struct kref		r_kref;
 	u32			r_key;
 
 	/* A copy of the creation flags */
@@ -299,19 +299,11 @@ struct rds_mr {
 	unsigned int		r_invalidate:1;
 	unsigned int		r_write:1;
 
-	/* This is for RDS_MR_DEAD.
-	 * It would be nice & consistent to make this part of the above
-	 * bit field here, but we need to use test_and_set_bit.
-	 */
-	unsigned long		r_state;
 	struct rds_sock		*r_sock; /* back pointer to the socket that owns us */
 	struct rds_transport	*r_trans;
 	void			*r_trans_private;
 };
 
-/* Flags for mr->r_state */
-#define RDS_MR_DEAD		0
-
 static inline rds_rdma_cookie_t rds_rdma_make_cookie(u32 r_key, u32 offset)
 {
 	return r_key | (((u64) offset) << 32);
@@ -852,8 +844,7 @@ rds_conn_connecting(struct rds_connection *conn)
 
 /* message.c */
 struct rds_message *rds_message_alloc(unsigned int nents, gfp_t gfp);
-struct scatterlist *rds_message_alloc_sgs(struct rds_message *rm, int nents,
-					  int *ret);
+struct scatterlist *rds_message_alloc_sgs(struct rds_message *rm, int nents);
 int rds_message_copy_from_user(struct rds_message *rm, struct iov_iter *from,
 			       bool zcopy);
 struct rds_message *rds_message_map_pages(unsigned long *page_addrs, unsigned int total_len);
@@ -946,12 +937,7 @@ void rds_atomic_send_complete(struct rds_message *rm, int wc_status);
 int rds_cmsg_atomic(struct rds_sock *rs, struct rds_message *rm,
 		    struct cmsghdr *cmsg);
 
-void __rds_put_mr_final(struct rds_mr *mr);
-static inline void rds_mr_put(struct rds_mr *mr)
-{
-	if (refcount_dec_and_test(&mr->r_refcount))
-		__rds_put_mr_final(mr);
-}
+void __rds_put_mr_final(struct kref *kref);
 
 static inline bool rds_destroy_pending(struct rds_connection *conn)
 {
diff --git a/net/rds/send.c b/net/rds/send.c
index 82dcd8b..68e2bdb 100644
--- a/net/rds/send.c
+++ b/net/rds/send.c
@@ -1274,9 +1274,11 @@ int rds_sendmsg(struct socket *sock, struct msghdr *msg, size_t payload_len)
 
 	/* Attach data to the rm */
 	if (payload_len) {
-		rm->data.op_sg = rds_message_alloc_sgs(rm, num_sgs, &ret);
-		if (!rm->data.op_sg)
+		rm->data.op_sg = rds_message_alloc_sgs(rm, num_sgs);
+		if (IS_ERR(rm->data.op_sg)) {
+			ret = PTR_ERR(rm->data.op_sg);
 			goto out;
+		}
 		ret = rds_message_copy_from_user(rm, &msg->msg_iter, zcopy);
 		if (ret)
 			goto out;
diff --git a/net/rxrpc/key.c b/net/rxrpc/key.c
index 6c3f35f..0c98313 100644
--- a/net/rxrpc/key.c
+++ b/net/rxrpc/key.c
@@ -31,7 +31,7 @@ static void rxrpc_free_preparse_s(struct key_preparsed_payload *);
 static void rxrpc_destroy(struct key *);
 static void rxrpc_destroy_s(struct key *);
 static void rxrpc_describe(const struct key *, struct seq_file *);
-static long rxrpc_read(const struct key *, char __user *, size_t);
+static long rxrpc_read(const struct key *, char *, size_t);
 
 /*
  * rxrpc defined keys take an arbitrary string as the description and an
@@ -1042,12 +1042,12 @@ EXPORT_SYMBOL(rxrpc_get_null_key);
  * - this returns the result in XDR form
  */
 static long rxrpc_read(const struct key *key,
-		       char __user *buffer, size_t buflen)
+		       char *buffer, size_t buflen)
 {
 	const struct rxrpc_key_token *token;
 	const struct krb5_principal *princ;
 	size_t size;
-	__be32 __user *xdr, *oldxdr;
+	__be32 *xdr, *oldxdr;
 	u32 cnlen, toksize, ntoks, tok, zero;
 	u16 toksizes[AFSTOKEN_MAX];
 	int loop;
@@ -1124,30 +1124,25 @@ static long rxrpc_read(const struct key *key,
 	if (!buffer || buflen < size)
 		return size;
 
-	xdr = (__be32 __user *) buffer;
+	xdr = (__be32 *)buffer;
 	zero = 0;
 #define ENCODE(x)				\
 	do {					\
-		__be32 y = htonl(x);		\
-		if (put_user(y, xdr++) < 0)	\
-			goto fault;		\
+		*xdr++ = htonl(x);		\
 	} while(0)
 #define ENCODE_DATA(l, s)						\
 	do {								\
 		u32 _l = (l);						\
 		ENCODE(l);						\
-		if (copy_to_user(xdr, (s), _l) != 0)			\
-			goto fault;					\
-		if (_l & 3 &&						\
-		    copy_to_user((u8 __user *)xdr + _l, &zero, 4 - (_l & 3)) != 0) \
-			goto fault;					\
+		memcpy(xdr, (s), _l);					\
+		if (_l & 3)						\
+			memcpy((u8 *)xdr + _l, &zero, 4 - (_l & 3));	\
 		xdr += (_l + 3) >> 2;					\
 	} while(0)
 #define ENCODE64(x)					\
 	do {						\
 		__be64 y = cpu_to_be64(x);		\
-		if (copy_to_user(xdr, &y, 8) != 0)	\
-			goto fault;			\
+		memcpy(xdr, &y, 8);			\
 		xdr += 8 >> 2;				\
 	} while(0)
 #define ENCODE_STR(s)				\
@@ -1238,8 +1233,4 @@ static long rxrpc_read(const struct key *key,
 	ASSERTCMP((char __user *) xdr - buffer, ==, size);
 	_leave(" = %zu", size);
 	return size;
-
-fault:
-	_leave(" = -EFAULT");
-	return -EFAULT;
 }
diff --git a/net/rxrpc/local_object.c b/net/rxrpc/local_object.c
index a6c1349..01135e5 100644
--- a/net/rxrpc/local_object.c
+++ b/net/rxrpc/local_object.c
@@ -165,15 +165,6 @@ static int rxrpc_open_socket(struct rxrpc_local *local, struct net *net)
 			goto error;
 		}
 
-		/* we want to set the don't fragment bit */
-		opt = IPV6_PMTUDISC_DO;
-		ret = kernel_setsockopt(local->socket, SOL_IPV6, IPV6_MTU_DISCOVER,
-					(char *) &opt, sizeof(opt));
-		if (ret < 0) {
-			_debug("setsockopt failed");
-			goto error;
-		}
-
 		/* Fall through and set IPv4 options too otherwise we don't get
 		 * errors from IPv4 packets sent through the IPv6 socket.
 		 */
diff --git a/net/rxrpc/output.c b/net/rxrpc/output.c
index bad3d24..90e263c6 100644
--- a/net/rxrpc/output.c
+++ b/net/rxrpc/output.c
@@ -474,42 +474,22 @@ int rxrpc_send_data_packet(struct rxrpc_call *call, struct sk_buff *skb,
 	skb->tstamp = ktime_get_real();
 
 	switch (conn->params.local->srx.transport.family) {
+	case AF_INET6:
 	case AF_INET:
 		opt = IP_PMTUDISC_DONT;
-		ret = kernel_setsockopt(conn->params.local->socket,
-					SOL_IP, IP_MTU_DISCOVER,
-					(char *)&opt, sizeof(opt));
-		if (ret == 0) {
-			ret = kernel_sendmsg(conn->params.local->socket, &msg,
-					     iov, 2, len);
-			conn->params.peer->last_tx_at = ktime_get_seconds();
+		kernel_setsockopt(conn->params.local->socket,
+				  SOL_IP, IP_MTU_DISCOVER,
+				  (char *)&opt, sizeof(opt));
+		ret = kernel_sendmsg(conn->params.local->socket, &msg,
+				     iov, 2, len);
+		conn->params.peer->last_tx_at = ktime_get_seconds();
 
-			opt = IP_PMTUDISC_DO;
-			kernel_setsockopt(conn->params.local->socket, SOL_IP,
-					  IP_MTU_DISCOVER,
-					  (char *)&opt, sizeof(opt));
-		}
+		opt = IP_PMTUDISC_DO;
+		kernel_setsockopt(conn->params.local->socket,
+				  SOL_IP, IP_MTU_DISCOVER,
+				  (char *)&opt, sizeof(opt));
 		break;
 
-#ifdef CONFIG_AF_RXRPC_IPV6
-	case AF_INET6:
-		opt = IPV6_PMTUDISC_DONT;
-		ret = kernel_setsockopt(conn->params.local->socket,
-					SOL_IPV6, IPV6_MTU_DISCOVER,
-					(char *)&opt, sizeof(opt));
-		if (ret == 0) {
-			ret = kernel_sendmsg(conn->params.local->socket, &msg,
-					     iov, 2, len);
-			conn->params.peer->last_tx_at = ktime_get_seconds();
-
-			opt = IPV6_PMTUDISC_DO;
-			kernel_setsockopt(conn->params.local->socket,
-					  SOL_IPV6, IPV6_MTU_DISCOVER,
-					  (char *)&opt, sizeof(opt));
-		}
-		break;
-#endif
-
 	default:
 		BUG();
 	}
diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c
index f6a3b96..55bd142 100644
--- a/net/sched/cls_api.c
+++ b/net/sched/cls_api.c
@@ -1667,6 +1667,7 @@ int tcf_classify_ingress(struct sk_buff *skb,
 		skb_ext_del(skb, TC_SKB_EXT);
 
 		tp = rcu_dereference_bh(fchain->filter_chain);
+		last_executed_chain = fchain->index;
 	}
 
 	ret = __tcf_classify(skb, tp, orig_tp, res, compat_mode,
diff --git a/net/sched/cls_tcindex.c b/net/sched/cls_tcindex.c
index 9904299..61e9502 100644
--- a/net/sched/cls_tcindex.c
+++ b/net/sched/cls_tcindex.c
@@ -11,6 +11,7 @@
 #include <linux/skbuff.h>
 #include <linux/errno.h>
 #include <linux/slab.h>
+#include <linux/refcount.h>
 #include <net/act_api.h>
 #include <net/netlink.h>
 #include <net/pkt_cls.h>
@@ -26,9 +27,12 @@
 #define DEFAULT_HASH_SIZE	64	/* optimized for diffserv */
 
 
+struct tcindex_data;
+
 struct tcindex_filter_result {
 	struct tcf_exts		exts;
 	struct tcf_result	res;
+	struct tcindex_data	*p;
 	struct rcu_work		rwork;
 };
 
@@ -49,6 +53,7 @@ struct tcindex_data {
 	u32 hash;		/* hash table size; 0 if undefined */
 	u32 alloc_hash;		/* allocated size */
 	u32 fall_through;	/* 0: only classify if explicit match */
+	refcount_t refcnt;	/* a temporary refcnt for perfect hash */
 	struct rcu_work rwork;
 };
 
@@ -57,6 +62,20 @@ static inline int tcindex_filter_is_set(struct tcindex_filter_result *r)
 	return tcf_exts_has_actions(&r->exts) || r->res.classid;
 }
 
+static void tcindex_data_get(struct tcindex_data *p)
+{
+	refcount_inc(&p->refcnt);
+}
+
+static void tcindex_data_put(struct tcindex_data *p)
+{
+	if (refcount_dec_and_test(&p->refcnt)) {
+		kfree(p->perfect);
+		kfree(p->h);
+		kfree(p);
+	}
+}
+
 static struct tcindex_filter_result *tcindex_lookup(struct tcindex_data *p,
 						    u16 key)
 {
@@ -132,6 +151,7 @@ static int tcindex_init(struct tcf_proto *tp)
 	p->mask = 0xffff;
 	p->hash = DEFAULT_HASH_SIZE;
 	p->fall_through = 1;
+	refcount_set(&p->refcnt, 1); /* Paired with tcindex_destroy_work() */
 
 	rcu_assign_pointer(tp->root, p);
 	return 0;
@@ -141,6 +161,7 @@ static void __tcindex_destroy_rexts(struct tcindex_filter_result *r)
 {
 	tcf_exts_destroy(&r->exts);
 	tcf_exts_put_net(&r->exts);
+	tcindex_data_put(r->p);
 }
 
 static void tcindex_destroy_rexts_work(struct work_struct *work)
@@ -212,6 +233,8 @@ static int tcindex_delete(struct tcf_proto *tp, void *arg, bool *last,
 		else
 			__tcindex_destroy_fexts(f);
 	} else {
+		tcindex_data_get(p);
+
 		if (tcf_exts_get_net(&r->exts))
 			tcf_queue_work(&r->rwork, tcindex_destroy_rexts_work);
 		else
@@ -228,9 +251,7 @@ static void tcindex_destroy_work(struct work_struct *work)
 					      struct tcindex_data,
 					      rwork);
 
-	kfree(p->perfect);
-	kfree(p->h);
-	kfree(p);
+	tcindex_data_put(p);
 }
 
 static inline int
@@ -248,9 +269,11 @@ static const struct nla_policy tcindex_policy[TCA_TCINDEX_MAX + 1] = {
 };
 
 static int tcindex_filter_result_init(struct tcindex_filter_result *r,
+				      struct tcindex_data *p,
 				      struct net *net)
 {
 	memset(r, 0, sizeof(*r));
+	r->p = p;
 	return tcf_exts_init(&r->exts, net, TCA_TCINDEX_ACT,
 			     TCA_TCINDEX_POLICE);
 }
@@ -290,6 +313,7 @@ static int tcindex_alloc_perfect_hash(struct net *net, struct tcindex_data *cp)
 				    TCA_TCINDEX_ACT, TCA_TCINDEX_POLICE);
 		if (err < 0)
 			goto errout;
+		cp->perfect[i].p = cp;
 	}
 
 	return 0;
@@ -334,6 +358,7 @@ tcindex_set_parms(struct net *net, struct tcf_proto *tp, unsigned long base,
 	cp->alloc_hash = p->alloc_hash;
 	cp->fall_through = p->fall_through;
 	cp->tp = tp;
+	refcount_set(&cp->refcnt, 1); /* Paired with tcindex_destroy_work() */
 
 	if (tb[TCA_TCINDEX_HASH])
 		cp->hash = nla_get_u32(tb[TCA_TCINDEX_HASH]);
@@ -366,7 +391,7 @@ tcindex_set_parms(struct net *net, struct tcf_proto *tp, unsigned long base,
 	}
 	cp->h = p->h;
 
-	err = tcindex_filter_result_init(&new_filter_result, net);
+	err = tcindex_filter_result_init(&new_filter_result, cp, net);
 	if (err < 0)
 		goto errout_alloc;
 	if (old_r)
@@ -434,7 +459,7 @@ tcindex_set_parms(struct net *net, struct tcf_proto *tp, unsigned long base,
 			goto errout_alloc;
 		f->key = handle;
 		f->next = NULL;
-		err = tcindex_filter_result_init(&f->result, net);
+		err = tcindex_filter_result_init(&f->result, cp, net);
 		if (err < 0) {
 			kfree(f);
 			goto errout_alloc;
@@ -447,7 +472,7 @@ tcindex_set_parms(struct net *net, struct tcf_proto *tp, unsigned long base,
 	}
 
 	if (old_r && old_r != r) {
-		err = tcindex_filter_result_init(old_r, net);
+		err = tcindex_filter_result_init(old_r, cp, net);
 		if (err < 0) {
 			kfree(f);
 			goto errout_alloc;
@@ -571,6 +596,14 @@ static void tcindex_destroy(struct tcf_proto *tp, bool rtnl_held,
 		for (i = 0; i < p->hash; i++) {
 			struct tcindex_filter_result *r = p->perfect + i;
 
+			/* tcf_queue_work() does not guarantee the ordering we
+			 * want, so we have to take this refcnt temporarily to
+			 * ensure 'p' is freed after all tcindex_filter_result
+			 * here. Imperfect hash does not need this, because it
+			 * uses linked lists rather than an array.
+			 */
+			tcindex_data_get(p);
+
 			tcf_unbind_filter(tp, &r->res);
 			if (tcf_exts_get_net(&r->exts))
 				tcf_queue_work(&r->rwork,
diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c
index 24ca861..25fbd8d 100644
--- a/net/sunrpc/auth_gss/auth_gss.c
+++ b/net/sunrpc/auth_gss/auth_gss.c
@@ -20,6 +20,7 @@
 #include <linux/sunrpc/clnt.h>
 #include <linux/sunrpc/auth.h>
 #include <linux/sunrpc/auth_gss.h>
+#include <linux/sunrpc/gss_krb5.h>
 #include <linux/sunrpc/svcauth_gss.h>
 #include <linux/sunrpc/gss_err.h>
 #include <linux/workqueue.h>
@@ -1050,7 +1051,7 @@ gss_create_new(const struct rpc_auth_create_args *args, struct rpc_clnt *clnt)
 		goto err_put_mech;
 	auth = &gss_auth->rpc_auth;
 	auth->au_cslack = GSS_CRED_SLACK >> 2;
-	auth->au_rslack = GSS_VERF_SLACK >> 2;
+	auth->au_rslack = GSS_KRB5_MAX_SLACK_NEEDED >> 2;
 	auth->au_verfsize = GSS_VERF_SLACK >> 2;
 	auth->au_ralign = GSS_VERF_SLACK >> 2;
 	auth->au_flags = 0;
@@ -1724,8 +1725,9 @@ gss_validate(struct rpc_task *task, struct xdr_stream *xdr)
 	goto out;
 }
 
-static int gss_wrap_req_integ(struct rpc_cred *cred, struct gss_cl_ctx *ctx,
-			      struct rpc_task *task, struct xdr_stream *xdr)
+static noinline_for_stack int
+gss_wrap_req_integ(struct rpc_cred *cred, struct gss_cl_ctx *ctx,
+		   struct rpc_task *task, struct xdr_stream *xdr)
 {
 	struct rpc_rqst *rqstp = task->tk_rqstp;
 	struct xdr_buf integ_buf, *snd_buf = &rqstp->rq_snd_buf;
@@ -1816,8 +1818,9 @@ alloc_enc_pages(struct rpc_rqst *rqstp)
 	return -EAGAIN;
 }
 
-static int gss_wrap_req_priv(struct rpc_cred *cred, struct gss_cl_ctx *ctx,
-			     struct rpc_task *task, struct xdr_stream *xdr)
+static noinline_for_stack int
+gss_wrap_req_priv(struct rpc_cred *cred, struct gss_cl_ctx *ctx,
+		  struct rpc_task *task, struct xdr_stream *xdr)
 {
 	struct rpc_rqst *rqstp = task->tk_rqstp;
 	struct xdr_buf	*snd_buf = &rqstp->rq_snd_buf;
@@ -1877,7 +1880,7 @@ static int gss_wrap_req_priv(struct rpc_cred *cred, struct gss_cl_ctx *ctx,
 	else
 		iov = snd_buf->head;
 	p = iov->iov_base + iov->iov_len;
-	pad = 3 - ((snd_buf->len - offset - 1) & 3);
+	pad = xdr_pad_size(snd_buf->len - offset);
 	memset(p, 0, pad);
 	iov->iov_len += pad;
 	snd_buf->len += pad;
@@ -1934,35 +1937,69 @@ gss_unwrap_resp_auth(struct rpc_cred *cred)
 	return 0;
 }
 
-static int
+/*
+ * RFC 2203, Section 5.3.2.2
+ *
+ *	struct rpc_gss_integ_data {
+ *		opaque databody_integ<>;
+ *		opaque checksum<>;
+ *	};
+ *
+ *	struct rpc_gss_data_t {
+ *		unsigned int seq_num;
+ *		proc_req_arg_t arg;
+ *	};
+ */
+static noinline_for_stack int
 gss_unwrap_resp_integ(struct rpc_task *task, struct rpc_cred *cred,
 		      struct gss_cl_ctx *ctx, struct rpc_rqst *rqstp,
 		      struct xdr_stream *xdr)
 {
-	struct xdr_buf integ_buf, *rcv_buf = &rqstp->rq_rcv_buf;
-	u32 data_offset, mic_offset, integ_len, maj_stat;
+	struct xdr_buf gss_data, *rcv_buf = &rqstp->rq_rcv_buf;
 	struct rpc_auth *auth = cred->cr_auth;
+	u32 len, offset, seqno, maj_stat;
 	struct xdr_netobj mic;
-	__be32 *p;
+	int ret;
 
-	p = xdr_inline_decode(xdr, 2 * sizeof(*p));
-	if (unlikely(!p))
+	ret = -EIO;
+	mic.data = NULL;
+
+	/* opaque databody_integ<>; */
+	if (xdr_stream_decode_u32(xdr, &len))
 		goto unwrap_failed;
-	integ_len = be32_to_cpup(p++);
-	if (integ_len & 3)
+	if (len & 3)
 		goto unwrap_failed;
-	data_offset = (u8 *)(p) - (u8 *)rcv_buf->head[0].iov_base;
-	mic_offset = integ_len + data_offset;
-	if (mic_offset > rcv_buf->len)
+	offset = rcv_buf->len - xdr_stream_remaining(xdr);
+	if (xdr_stream_decode_u32(xdr, &seqno))
 		goto unwrap_failed;
-	if (be32_to_cpup(p) != rqstp->rq_seqno)
+	if (seqno != rqstp->rq_seqno)
 		goto bad_seqno;
+	if (xdr_buf_subsegment(rcv_buf, &gss_data, offset, len))
+		goto unwrap_failed;
 
-	if (xdr_buf_subsegment(rcv_buf, &integ_buf, data_offset, integ_len))
+	/*
+	 * The xdr_stream now points to the beginning of the
+	 * upper layer payload, to be passed below to
+	 * rpcauth_unwrap_resp_decode(). The checksum, which
+	 * follows the upper layer payload in @rcv_buf, is
+	 * located and parsed without updating the xdr_stream.
+	 */
+
+	/* opaque checksum<>; */
+	offset += len;
+	if (xdr_decode_word(rcv_buf, offset, &len))
 		goto unwrap_failed;
-	if (xdr_buf_read_mic(rcv_buf, &mic, mic_offset))
+	offset += sizeof(__be32);
+	if (offset + len > rcv_buf->len)
 		goto unwrap_failed;
-	maj_stat = gss_verify_mic(ctx->gc_gss_ctx, &integ_buf, &mic);
+	mic.len = len;
+	mic.data = kmalloc(len, GFP_NOFS);
+	if (!mic.data)
+		goto unwrap_failed;
+	if (read_bytes_from_xdr_buf(rcv_buf, offset, mic.data, mic.len))
+		goto unwrap_failed;
+
+	maj_stat = gss_verify_mic(ctx->gc_gss_ctx, &gss_data, &mic);
 	if (maj_stat == GSS_S_CONTEXT_EXPIRED)
 		clear_bit(RPCAUTH_CRED_UPTODATE, &cred->cr_flags);
 	if (maj_stat != GSS_S_COMPLETE)
@@ -1970,19 +2007,24 @@ gss_unwrap_resp_integ(struct rpc_task *task, struct rpc_cred *cred,
 
 	auth->au_rslack = auth->au_verfsize + 2 + 1 + XDR_QUADLEN(mic.len);
 	auth->au_ralign = auth->au_verfsize + 2;
-	return 0;
+	ret = 0;
+
+out:
+	kfree(mic.data);
+	return ret;
+
 unwrap_failed:
 	trace_rpcgss_unwrap_failed(task);
-	return -EIO;
+	goto out;
 bad_seqno:
-	trace_rpcgss_bad_seqno(task, rqstp->rq_seqno, be32_to_cpup(p));
-	return -EIO;
+	trace_rpcgss_bad_seqno(task, rqstp->rq_seqno, seqno);
+	goto out;
 bad_mic:
 	trace_rpcgss_verify_mic(task, maj_stat);
-	return -EIO;
+	goto out;
 }
 
-static int
+static noinline_for_stack int
 gss_unwrap_resp_priv(struct rpc_task *task, struct rpc_cred *cred,
 		     struct gss_cl_ctx *ctx, struct rpc_rqst *rqstp,
 		     struct xdr_stream *xdr)
diff --git a/net/sunrpc/auth_gss/svcauth_gss.c b/net/sunrpc/auth_gss/svcauth_gss.c
index 65b67b2..54ae5be 100644
--- a/net/sunrpc/auth_gss/svcauth_gss.c
+++ b/net/sunrpc/auth_gss/svcauth_gss.c
@@ -55,10 +55,6 @@
 #include "gss_rpc_upcall.h"
 
 
-#if IS_ENABLED(CONFIG_SUNRPC_DEBUG)
-# define RPCDBG_FACILITY	RPCDBG_AUTH
-#endif
-
 /* The rpcsec_init cache is used for mapping RPCSEC_GSS_{,CONT_}INIT requests
  * into replies.
  *
@@ -184,6 +180,11 @@ static struct cache_head *rsi_alloc(void)
 		return NULL;
 }
 
+static int rsi_upcall(struct cache_detail *cd, struct cache_head *h)
+{
+	return sunrpc_cache_pipe_upcall_timeout(cd, h);
+}
+
 static void rsi_request(struct cache_detail *cd,
 		       struct cache_head *h,
 		       char **bpp, int *blen)
@@ -282,6 +283,7 @@ static const struct cache_detail rsi_cache_template = {
 	.hash_size	= RSI_HASHMAX,
 	.name           = "auth.rpcsec.init",
 	.cache_put      = rsi_put,
+	.cache_upcall	= rsi_upcall,
 	.cache_request  = rsi_request,
 	.cache_parse    = rsi_parse,
 	.match		= rsi_match,
@@ -428,6 +430,11 @@ rsc_alloc(void)
 		return NULL;
 }
 
+static int rsc_upcall(struct cache_detail *cd, struct cache_head *h)
+{
+	return -EINVAL;
+}
+
 static int rsc_parse(struct cache_detail *cd,
 		     char *mesg, int mlen)
 {
@@ -554,6 +561,7 @@ static const struct cache_detail rsc_cache_template = {
 	.hash_size	= RSC_HASHMAX,
 	.name		= "auth.rpcsec.context",
 	.cache_put	= rsc_put,
+	.cache_upcall	= rsc_upcall,
 	.cache_parse	= rsc_parse,
 	.match		= rsc_match,
 	.init		= rsc_init,
@@ -713,14 +721,12 @@ gss_verify_header(struct svc_rqst *rqstp, struct rsc *rsci,
 	}
 
 	if (gc->gc_seq > MAXSEQ) {
-		dprintk("RPC:       svcauth_gss: discarding request with "
-				"large sequence number %d\n", gc->gc_seq);
+		trace_rpcgss_svc_large_seqno(rqstp->rq_xid, gc->gc_seq);
 		*authp = rpcsec_gsserr_ctxproblem;
 		return SVC_DENIED;
 	}
 	if (!gss_check_seq_num(rsci, gc->gc_seq)) {
-		dprintk("RPC:       svcauth_gss: discarding request with "
-				"old sequence number %d\n", gc->gc_seq);
+		trace_rpcgss_svc_old_seqno(rqstp->rq_xid, gc->gc_seq);
 		return SVC_DROP;
 	}
 	return SVC_OK;
@@ -961,7 +967,7 @@ unwrap_priv_data(struct svc_rqst *rqstp, struct xdr_buf *buf, u32 seq, struct gs
 	/* XXX: This is very inefficient.  It would be better to either do
 	 * this while we encrypt, or maybe in the receive code, if we can peak
 	 * ahead and work out the service and mechanism there. */
-	offset = buf->head[0].iov_len % 4;
+	offset = xdr_pad_size(buf->head[0].iov_len);
 	if (offset) {
 		buf->buflen = RPCSVC_MAXPAYLOAD;
 		xdr_shift_buf(buf, offset);
@@ -1245,7 +1251,6 @@ static int gss_proxy_save_rsc(struct cache_detail *cd,
 	if (!ud->found_creds) {
 		/* userspace seem buggy, we should always get at least a
 		 * mapping to nobody */
-		dprintk("RPC:       No creds found!\n");
 		goto out;
 	} else {
 		struct timespec64 boot;
@@ -1311,8 +1316,8 @@ static int svcauth_gss_proxy_init(struct svc_rqst *rqstp,
 	if (status)
 		goto out;
 
-	trace_rpcgss_accept_upcall(rqstp->rq_xid, ud.major_status,
-				   ud.minor_status);
+	trace_rpcgss_svc_accept_upcall(rqstp->rq_xid, ud.major_status,
+				       ud.minor_status);
 
 	switch (ud.major_status) {
 	case GSS_S_CONTINUE_NEEDED:
@@ -1320,31 +1325,23 @@ static int svcauth_gss_proxy_init(struct svc_rqst *rqstp,
 		break;
 	case GSS_S_COMPLETE:
 		status = gss_proxy_save_rsc(sn->rsc_cache, &ud, &handle);
-		if (status) {
-			pr_info("%s: gss_proxy_save_rsc failed (%d)\n",
-				__func__, status);
+		if (status)
 			goto out;
-		}
 		cli_handle.data = (u8 *)&handle;
 		cli_handle.len = sizeof(handle);
 		break;
 	default:
-		ret = SVC_CLOSE;
 		goto out;
 	}
 
 	/* Got an answer to the upcall; use it: */
 	if (gss_write_init_verf(sn->rsc_cache, rqstp,
-				&cli_handle, &ud.major_status)) {
-		pr_info("%s: gss_write_init_verf failed\n", __func__);
+				&cli_handle, &ud.major_status))
 		goto out;
-	}
 	if (gss_write_resv(resv, PAGE_SIZE,
 			   &cli_handle, &ud.out_token,
-			   ud.major_status, ud.minor_status)) {
-		pr_info("%s: gss_write_resv failed\n", __func__);
+			   ud.major_status, ud.minor_status))
 		goto out;
-	}
 
 	ret = SVC_COMPLETE;
 out:
@@ -1495,8 +1492,7 @@ svcauth_gss_accept(struct svc_rqst *rqstp, __be32 *authp)
 	int		ret;
 	struct sunrpc_net *sn = net_generic(SVC_NET(rqstp), sunrpc_net_id);
 
-	dprintk("RPC:       svcauth_gss: argv->iov_len = %zd\n",
-			argv->iov_len);
+	trace_rpcgss_svc_accept(rqstp->rq_xid, argv->iov_len);
 
 	*authp = rpc_autherr_badcred;
 	if (!svcdata)
@@ -1680,7 +1676,8 @@ svcauth_gss_wrap_resp_integ(struct svc_rqst *rqstp)
 		goto out;
 	integ_offset = (u8 *)(p + 1) - (u8 *)resbuf->head[0].iov_base;
 	integ_len = resbuf->len - integ_offset;
-	BUG_ON(integ_len % 4);
+	if (integ_len & 3)
+		goto out;
 	*p++ = htonl(integ_len);
 	*p++ = htonl(gc->gc_seq);
 	if (xdr_buf_subsegment(resbuf, &integ_buf, integ_offset, integ_len)) {
@@ -1704,7 +1701,8 @@ svcauth_gss_wrap_resp_integ(struct svc_rqst *rqstp)
 	resv->iov_len += XDR_QUADLEN(mic.len) << 2;
 	/* not strictly required: */
 	resbuf->len += XDR_QUADLEN(mic.len) << 2;
-	BUG_ON(resv->iov_len > PAGE_SIZE);
+	if (resv->iov_len > PAGE_SIZE)
+		goto out_err;
 out:
 	stat = 0;
 out_err:
@@ -1740,9 +1738,11 @@ svcauth_gss_wrap_resp_priv(struct svc_rqst *rqstp)
 	 * both the head and tail.
 	 */
 	if (resbuf->tail[0].iov_base) {
-		BUG_ON(resbuf->tail[0].iov_base >= resbuf->head[0].iov_base
-							+ PAGE_SIZE);
-		BUG_ON(resbuf->tail[0].iov_base < resbuf->head[0].iov_base);
+		if (resbuf->tail[0].iov_base >=
+			resbuf->head[0].iov_base + PAGE_SIZE)
+			return -EINVAL;
+		if (resbuf->tail[0].iov_base < resbuf->head[0].iov_base)
+			return -EINVAL;
 		if (resbuf->tail[0].iov_len + resbuf->head[0].iov_len
 				+ 2 * RPC_MAX_AUTH_SIZE > PAGE_SIZE)
 			return -ENOMEM;
diff --git a/net/sunrpc/cache.c b/net/sunrpc/cache.c
index bd843a8..af0ddd2 100644
--- a/net/sunrpc/cache.c
+++ b/net/sunrpc/cache.c
@@ -32,13 +32,13 @@
 #include <linux/sunrpc/cache.h>
 #include <linux/sunrpc/stats.h>
 #include <linux/sunrpc/rpc_pipe_fs.h>
+#include <trace/events/sunrpc.h>
 #include "netns.h"
 
 #define	 RPCDBG_FACILITY RPCDBG_CACHE
 
 static bool cache_defer_req(struct cache_req *req, struct cache_head *item);
 static void cache_revisit_request(struct cache_head *item);
-static bool cache_listeners_exist(struct cache_detail *detail);
 
 static void cache_init(struct cache_head *h, struct cache_detail *detail)
 {
@@ -65,13 +65,14 @@ static struct cache_head *sunrpc_cache_find_rcu(struct cache_detail *detail,
 
 	rcu_read_lock();
 	hlist_for_each_entry_rcu(tmp, head, cache_list) {
-		if (detail->match(tmp, key)) {
-			if (cache_is_expired(detail, tmp))
-				continue;
-			tmp = cache_get_rcu(tmp);
-			rcu_read_unlock();
-			return tmp;
-		}
+		if (!detail->match(tmp, key))
+			continue;
+		if (test_bit(CACHE_VALID, &tmp->flags) &&
+		    cache_is_expired(detail, tmp))
+			continue;
+		tmp = cache_get_rcu(tmp);
+		rcu_read_unlock();
+		return tmp;
 	}
 	rcu_read_unlock();
 	return NULL;
@@ -113,18 +114,21 @@ static struct cache_head *sunrpc_cache_add_entry(struct cache_detail *detail,
 	spin_lock(&detail->hash_lock);
 
 	/* check if entry appeared while we slept */
-	hlist_for_each_entry_rcu(tmp, head, cache_list) {
-		if (detail->match(tmp, key)) {
-			if (cache_is_expired(detail, tmp)) {
-				sunrpc_begin_cache_remove_entry(tmp, detail);
-				freeme = tmp;
-				break;
-			}
-			cache_get(tmp);
-			spin_unlock(&detail->hash_lock);
-			cache_put(new, detail);
-			return tmp;
+	hlist_for_each_entry_rcu(tmp, head, cache_list,
+				 lockdep_is_held(&detail->hash_lock)) {
+		if (!detail->match(tmp, key))
+			continue;
+		if (test_bit(CACHE_VALID, &tmp->flags) &&
+		    cache_is_expired(detail, tmp)) {
+			sunrpc_begin_cache_remove_entry(tmp, detail);
+			trace_cache_entry_expired(detail, tmp);
+			freeme = tmp;
+			break;
 		}
+		cache_get(tmp);
+		spin_unlock(&detail->hash_lock);
+		cache_put(new, detail);
+		return tmp;
 	}
 
 	hlist_add_head_rcu(&new->cache_list, head);
@@ -174,6 +178,25 @@ static void cache_fresh_unlocked(struct cache_head *head,
 	}
 }
 
+static void cache_make_negative(struct cache_detail *detail,
+				struct cache_head *h)
+{
+	set_bit(CACHE_NEGATIVE, &h->flags);
+	trace_cache_entry_make_negative(detail, h);
+}
+
+static void cache_entry_update(struct cache_detail *detail,
+			       struct cache_head *h,
+			       struct cache_head *new)
+{
+	if (!test_bit(CACHE_NEGATIVE, &new->flags)) {
+		detail->update(h, new);
+		trace_cache_entry_update(detail, h);
+	} else {
+		cache_make_negative(detail, h);
+	}
+}
+
 struct cache_head *sunrpc_cache_update(struct cache_detail *detail,
 				       struct cache_head *new, struct cache_head *old, int hash)
 {
@@ -186,10 +209,7 @@ struct cache_head *sunrpc_cache_update(struct cache_detail *detail,
 	if (!test_bit(CACHE_VALID, &old->flags)) {
 		spin_lock(&detail->hash_lock);
 		if (!test_bit(CACHE_VALID, &old->flags)) {
-			if (test_bit(CACHE_NEGATIVE, &new->flags))
-				set_bit(CACHE_NEGATIVE, &old->flags);
-			else
-				detail->update(old, new);
+			cache_entry_update(detail, old, new);
 			cache_fresh_locked(old, new->expiry_time, detail);
 			spin_unlock(&detail->hash_lock);
 			cache_fresh_unlocked(old, detail);
@@ -207,10 +227,7 @@ struct cache_head *sunrpc_cache_update(struct cache_detail *detail,
 	detail->init(tmp, old);
 
 	spin_lock(&detail->hash_lock);
-	if (test_bit(CACHE_NEGATIVE, &new->flags))
-		set_bit(CACHE_NEGATIVE, &tmp->flags);
-	else
-		detail->update(tmp, new);
+	cache_entry_update(detail, tmp, new);
 	hlist_add_head(&tmp->cache_list, &detail->hash_table[hash]);
 	detail->entries++;
 	cache_get(tmp);
@@ -224,13 +241,6 @@ struct cache_head *sunrpc_cache_update(struct cache_detail *detail,
 }
 EXPORT_SYMBOL_GPL(sunrpc_cache_update);
 
-static int cache_make_upcall(struct cache_detail *cd, struct cache_head *h)
-{
-	if (cd->cache_upcall)
-		return cd->cache_upcall(cd, h);
-	return sunrpc_cache_pipe_upcall(cd, h);
-}
-
 static inline int cache_is_valid(struct cache_head *h)
 {
 	if (!test_bit(CACHE_VALID, &h->flags))
@@ -259,7 +269,7 @@ static int try_to_negate_entry(struct cache_detail *detail, struct cache_head *h
 	spin_lock(&detail->hash_lock);
 	rv = cache_is_valid(h);
 	if (rv == -EAGAIN) {
-		set_bit(CACHE_NEGATIVE, &h->flags);
+		cache_make_negative(detail, h);
 		cache_fresh_locked(h, seconds_since_boot()+CACHE_NEW_EXPIRY,
 				   detail);
 		rv = -ENOENT;
@@ -303,17 +313,14 @@ int cache_check(struct cache_detail *detail,
 		   (h->expiry_time != 0 && age > refresh_age/2)) {
 		dprintk("RPC:       Want update, refage=%lld, age=%lld\n",
 				refresh_age, age);
-		if (!test_and_set_bit(CACHE_PENDING, &h->flags)) {
-			switch (cache_make_upcall(detail, h)) {
-			case -EINVAL:
-				rv = try_to_negate_entry(detail, h);
-				break;
-			case -EAGAIN:
-				cache_fresh_unlocked(h, detail);
-				break;
-			}
-		} else if (!cache_listeners_exist(detail))
+		switch (detail->cache_upcall(detail, h)) {
+		case -EINVAL:
 			rv = try_to_negate_entry(detail, h);
+			break;
+		case -EAGAIN:
+			cache_fresh_unlocked(h, detail);
+			break;
+		}
 	}
 
 	if (rv == -EAGAIN) {
@@ -468,6 +475,7 @@ static int cache_clean(void)
 				continue;
 
 			sunrpc_begin_cache_remove_entry(ch, current_detail);
+			trace_cache_entry_expired(current_detail, ch);
 			rv = 1;
 			break;
 		}
@@ -1195,20 +1203,12 @@ static bool cache_listeners_exist(struct cache_detail *detail)
  *
  * Each request is at most one page long.
  */
-int sunrpc_cache_pipe_upcall(struct cache_detail *detail, struct cache_head *h)
+static int cache_pipe_upcall(struct cache_detail *detail, struct cache_head *h)
 {
-
 	char *buf;
 	struct cache_request *crq;
 	int ret = 0;
 
-	if (!detail->cache_request)
-		return -EINVAL;
-
-	if (!cache_listeners_exist(detail)) {
-		warn_no_listener(detail);
-		return -EINVAL;
-	}
 	if (test_bit(CACHE_CLEANED, &h->flags))
 		/* Too late to make an upcall */
 		return -EAGAIN;
@@ -1231,6 +1231,7 @@ int sunrpc_cache_pipe_upcall(struct cache_detail *detail, struct cache_head *h)
 	if (test_bit(CACHE_PENDING, &h->flags)) {
 		crq->item = cache_get(h);
 		list_add_tail(&crq->q.list, &detail->queue);
+		trace_cache_entry_upcall(detail, h);
 	} else
 		/* Lost a race, no longer PENDING, so don't enqueue */
 		ret = -EAGAIN;
@@ -1242,8 +1243,27 @@ int sunrpc_cache_pipe_upcall(struct cache_detail *detail, struct cache_head *h)
 	}
 	return ret;
 }
+
+int sunrpc_cache_pipe_upcall(struct cache_detail *detail, struct cache_head *h)
+{
+	if (test_and_set_bit(CACHE_PENDING, &h->flags))
+		return 0;
+	return cache_pipe_upcall(detail, h);
+}
 EXPORT_SYMBOL_GPL(sunrpc_cache_pipe_upcall);
 
+int sunrpc_cache_pipe_upcall_timeout(struct cache_detail *detail,
+				     struct cache_head *h)
+{
+	if (!cache_listeners_exist(detail)) {
+		warn_no_listener(detail);
+		trace_cache_entry_no_listener(detail, h);
+		return -EINVAL;
+	}
+	return sunrpc_cache_pipe_upcall(detail, h);
+}
+EXPORT_SYMBOL_GPL(sunrpc_cache_pipe_upcall_timeout);
+
 /*
  * parse a message from user-space and pass it
  * to an appropriate cache
diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c
index 7324b21..325a085 100644
--- a/net/sunrpc/clnt.c
+++ b/net/sunrpc/clnt.c
@@ -1099,8 +1099,9 @@ rpc_task_set_rpc_message(struct rpc_task *task, const struct rpc_message *msg)
 		task->tk_msg.rpc_proc = msg->rpc_proc;
 		task->tk_msg.rpc_argp = msg->rpc_argp;
 		task->tk_msg.rpc_resp = msg->rpc_resp;
-		if (msg->rpc_cred != NULL)
-			task->tk_msg.rpc_cred = get_cred(msg->rpc_cred);
+		task->tk_msg.rpc_cred = msg->rpc_cred;
+		if (!(task->tk_flags & RPC_TASK_CRED_NOREF))
+			get_cred(task->tk_msg.rpc_cred);
 	}
 }
 
@@ -1126,6 +1127,9 @@ struct rpc_task *rpc_run_task(const struct rpc_task_setup *task_setup_data)
 
 	task = rpc_new_task(task_setup_data);
 
+	if (!RPC_IS_ASYNC(task))
+		task->tk_flags |= RPC_TASK_CRED_NOREF;
+
 	rpc_task_set_client(task, task_setup_data->rpc_client);
 	rpc_task_set_rpc_message(task, task_setup_data->rpc_message);
 
@@ -2509,6 +2513,7 @@ call_decode(struct rpc_task *task)
 		goto out;
 
 	req->rq_rcv_buf.len = req->rq_private_buf.len;
+	trace_xprt_recvfrom(&req->rq_rcv_buf);
 
 	/* Check that the softirq receive buffer is valid */
 	WARN_ON(memcmp(&req->rq_rcv_buf, &req->rq_private_buf,
diff --git a/net/sunrpc/sched.c b/net/sunrpc/sched.c
index 55e9002..7eba20a 100644
--- a/net/sunrpc/sched.c
+++ b/net/sunrpc/sched.c
@@ -204,10 +204,6 @@ static void __rpc_add_wait_queue(struct rpc_wait_queue *queue,
 		struct rpc_task *task,
 		unsigned char queue_priority)
 {
-	WARN_ON_ONCE(RPC_IS_QUEUED(task));
-	if (RPC_IS_QUEUED(task))
-		return;
-
 	INIT_LIST_HEAD(&task->u.tk_wait.timer_list);
 	if (RPC_IS_PRIORITY(queue))
 		__rpc_add_wait_queue_priority(queue, task, queue_priority);
@@ -382,7 +378,7 @@ static void rpc_make_runnable(struct workqueue_struct *wq,
  * NB: An RPC task will only receive interrupt-driven events as long
  * as it's on a wait queue.
  */
-static void __rpc_sleep_on_priority(struct rpc_wait_queue *q,
+static void __rpc_do_sleep_on_priority(struct rpc_wait_queue *q,
 		struct rpc_task *task,
 		unsigned char queue_priority)
 {
@@ -395,12 +391,23 @@ static void __rpc_sleep_on_priority(struct rpc_wait_queue *q,
 
 }
 
+static void __rpc_sleep_on_priority(struct rpc_wait_queue *q,
+		struct rpc_task *task,
+		unsigned char queue_priority)
+{
+	if (WARN_ON_ONCE(RPC_IS_QUEUED(task)))
+		return;
+	__rpc_do_sleep_on_priority(q, task, queue_priority);
+}
+
 static void __rpc_sleep_on_priority_timeout(struct rpc_wait_queue *q,
 		struct rpc_task *task, unsigned long timeout,
 		unsigned char queue_priority)
 {
+	if (WARN_ON_ONCE(RPC_IS_QUEUED(task)))
+		return;
 	if (time_is_after_jiffies(timeout)) {
-		__rpc_sleep_on_priority(q, task, queue_priority);
+		__rpc_do_sleep_on_priority(q, task, queue_priority);
 		__rpc_add_timer(q, task, timeout);
 	} else
 		task->tk_status = -ETIMEDOUT;
@@ -1162,7 +1169,8 @@ static void rpc_release_resources_task(struct rpc_task *task)
 {
 	xprt_release(task);
 	if (task->tk_msg.rpc_cred) {
-		put_cred(task->tk_msg.rpc_cred);
+		if (!(task->tk_flags & RPC_TASK_CRED_NOREF))
+			put_cred(task->tk_msg.rpc_cred);
 		task->tk_msg.rpc_cred = NULL;
 	}
 	rpc_task_release_client(task);
diff --git a/net/sunrpc/socklib.c b/net/sunrpc/socklib.c
index 1a864f1..3fc8af8 100644
--- a/net/sunrpc/socklib.c
+++ b/net/sunrpc/socklib.c
@@ -14,9 +14,24 @@
 #include <linux/types.h>
 #include <linux/pagemap.h>
 #include <linux/udp.h>
+#include <linux/sunrpc/msg_prot.h>
 #include <linux/sunrpc/xdr.h>
 #include <linux/export.h>
 
+#include "socklib.h"
+
+/*
+ * Helper structure for copying from an sk_buff.
+ */
+struct xdr_skb_reader {
+	struct sk_buff	*skb;
+	unsigned int	offset;
+	size_t		count;
+	__wsum		csum;
+};
+
+typedef size_t (*xdr_skb_read_actor)(struct xdr_skb_reader *desc, void *to,
+				     size_t len);
 
 /**
  * xdr_skb_read_bits - copy some data bits from skb to internal buffer
@@ -186,3 +201,129 @@ int csum_partial_copy_to_xdr(struct xdr_buf *xdr, struct sk_buff *skb)
 	return 0;
 }
 EXPORT_SYMBOL_GPL(csum_partial_copy_to_xdr);
+
+static inline int xprt_sendmsg(struct socket *sock, struct msghdr *msg,
+			       size_t seek)
+{
+	if (seek)
+		iov_iter_advance(&msg->msg_iter, seek);
+	return sock_sendmsg(sock, msg);
+}
+
+static int xprt_send_kvec(struct socket *sock, struct msghdr *msg,
+			  struct kvec *vec, size_t seek)
+{
+	iov_iter_kvec(&msg->msg_iter, WRITE, vec, 1, vec->iov_len);
+	return xprt_sendmsg(sock, msg, seek);
+}
+
+static int xprt_send_pagedata(struct socket *sock, struct msghdr *msg,
+			      struct xdr_buf *xdr, size_t base)
+{
+	int err;
+
+	err = xdr_alloc_bvec(xdr, GFP_KERNEL);
+	if (err < 0)
+		return err;
+
+	iov_iter_bvec(&msg->msg_iter, WRITE, xdr->bvec, xdr_buf_pagecount(xdr),
+		      xdr->page_len + xdr->page_base);
+	return xprt_sendmsg(sock, msg, base + xdr->page_base);
+}
+
+/* Common case:
+ *  - stream transport
+ *  - sending from byte 0 of the message
+ *  - the message is wholly contained in @xdr's head iovec
+ */
+static int xprt_send_rm_and_kvec(struct socket *sock, struct msghdr *msg,
+				 rpc_fraghdr marker, struct kvec *vec,
+				 size_t base)
+{
+	struct kvec iov[2] = {
+		[0] = {
+			.iov_base	= &marker,
+			.iov_len	= sizeof(marker)
+		},
+		[1] = *vec,
+	};
+	size_t len = iov[0].iov_len + iov[1].iov_len;
+
+	iov_iter_kvec(&msg->msg_iter, WRITE, iov, 2, len);
+	return xprt_sendmsg(sock, msg, base);
+}
+
+/**
+ * xprt_sock_sendmsg - write an xdr_buf directly to a socket
+ * @sock: open socket to send on
+ * @msg: socket message metadata
+ * @xdr: xdr_buf containing this request
+ * @base: starting position in the buffer
+ * @marker: stream record marker field
+ * @sent_p: return the total number of bytes successfully queued for sending
+ *
+ * Return values:
+ *   On success, returns zero and fills in @sent_p.
+ *   %-ENOTSOCK if  @sock is not a struct socket.
+ */
+int xprt_sock_sendmsg(struct socket *sock, struct msghdr *msg,
+		      struct xdr_buf *xdr, unsigned int base,
+		      rpc_fraghdr marker, unsigned int *sent_p)
+{
+	unsigned int rmsize = marker ? sizeof(marker) : 0;
+	unsigned int remainder = rmsize + xdr->len - base;
+	unsigned int want;
+	int err = 0;
+
+	*sent_p = 0;
+
+	if (unlikely(!sock))
+		return -ENOTSOCK;
+
+	msg->msg_flags |= MSG_MORE;
+	want = xdr->head[0].iov_len + rmsize;
+	if (base < want) {
+		unsigned int len = want - base;
+
+		remainder -= len;
+		if (remainder == 0)
+			msg->msg_flags &= ~MSG_MORE;
+		if (rmsize)
+			err = xprt_send_rm_and_kvec(sock, msg, marker,
+						    &xdr->head[0], base);
+		else
+			err = xprt_send_kvec(sock, msg, &xdr->head[0], base);
+		if (remainder == 0 || err != len)
+			goto out;
+		*sent_p += err;
+		base = 0;
+	} else {
+		base -= want;
+	}
+
+	if (base < xdr->page_len) {
+		unsigned int len = xdr->page_len - base;
+
+		remainder -= len;
+		if (remainder == 0)
+			msg->msg_flags &= ~MSG_MORE;
+		err = xprt_send_pagedata(sock, msg, xdr, base);
+		if (remainder == 0 || err != len)
+			goto out;
+		*sent_p += err;
+		base = 0;
+	} else {
+		base -= xdr->page_len;
+	}
+
+	if (base >= xdr->tail[0].iov_len)
+		return 0;
+	msg->msg_flags &= ~MSG_MORE;
+	err = xprt_send_kvec(sock, msg, &xdr->tail[0], base);
+out:
+	if (err > 0) {
+		*sent_p += err;
+		err = 0;
+	}
+	return err;
+}
diff --git a/net/sunrpc/socklib.h b/net/sunrpc/socklib.h
new file mode 100644
index 0000000..c48114ad
--- /dev/null
+++ b/net/sunrpc/socklib.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 1995-1997 Olaf Kirch <okir@monad.swb.de>
+ * Copyright (C) 2020, Oracle.
+ */
+
+#ifndef _NET_SUNRPC_SOCKLIB_H_
+#define _NET_SUNRPC_SOCKLIB_H_
+
+int csum_partial_copy_to_xdr(struct xdr_buf *xdr, struct sk_buff *skb);
+int xprt_sock_sendmsg(struct socket *sock, struct msghdr *msg,
+		      struct xdr_buf *xdr, unsigned int base,
+		      rpc_fraghdr marker, unsigned int *sent_p);
+
+#endif /* _NET_SUNRPC_SOCKLIB_H_ */
diff --git a/net/sunrpc/sunrpc.h b/net/sunrpc/sunrpc.h
index c9bacb3..47a7565 100644
--- a/net/sunrpc/sunrpc.h
+++ b/net/sunrpc/sunrpc.h
@@ -50,10 +50,6 @@ static inline int sock_is_loopback(struct sock *sk)
 	return loopback;
 }
 
-int svc_send_common(struct socket *sock, struct xdr_buf *xdr,
-		    struct page *headpage, unsigned long headoffset,
-		    struct page *tailpage, unsigned long tailoffset);
-
 int rpc_clients_notifier_register(void);
 void rpc_clients_notifier_unregister(void);
 #endif /* _NET_SUNRPC_SUNRPC_H */
diff --git a/net/sunrpc/svc.c b/net/sunrpc/svc.c
index 187dd4e..9ed3126 100644
--- a/net/sunrpc/svc.c
+++ b/net/sunrpc/svc.c
@@ -1529,10 +1529,6 @@ svc_process(struct svc_rqst *rqstp)
 		goto out_drop;
 	}
 
-	/* Reserve space for the record marker */
-	if (rqstp->rq_prot == IPPROTO_TCP)
-		svc_putnl(resv, 0);
-
 	/* Returns 1 for send, 0 for drop */
 	if (likely(svc_process_common(rqstp, argv, resv)))
 		return svc_send(rqstp);
@@ -1637,6 +1633,22 @@ u32 svc_max_payload(const struct svc_rqst *rqstp)
 EXPORT_SYMBOL_GPL(svc_max_payload);
 
 /**
+ * svc_encode_read_payload - mark a range of bytes as a READ payload
+ * @rqstp: svc_rqst to operate on
+ * @offset: payload's byte offset in rqstp->rq_res
+ * @length: size of payload, in bytes
+ *
+ * Returns zero on success, or a negative errno if a permanent
+ * error occurred.
+ */
+int svc_encode_read_payload(struct svc_rqst *rqstp, unsigned int offset,
+			    unsigned int length)
+{
+	return rqstp->rq_xprt->xpt_ops->xpo_read_payload(rqstp, offset, length);
+}
+EXPORT_SYMBOL_GPL(svc_encode_read_payload);
+
+/**
  * svc_fill_write_vector - Construct data argument for VFS write call
  * @rqstp: svc_rqst to operate on
  * @pages: list of pages containing data payload
diff --git a/net/sunrpc/svc_xprt.c b/net/sunrpc/svc_xprt.c
index de3c077..e27e353 100644
--- a/net/sunrpc/svc_xprt.c
+++ b/net/sunrpc/svc_xprt.c
@@ -104,8 +104,17 @@ void svc_unreg_xprt_class(struct svc_xprt_class *xcl)
 }
 EXPORT_SYMBOL_GPL(svc_unreg_xprt_class);
 
-/*
- * Format the transport list for printing
+/**
+ * svc_print_xprts - Format the transport list for printing
+ * @buf: target buffer for formatted address
+ * @maxlen: length of target buffer
+ *
+ * Fills in @buf with a string containing a list of transport names, each name
+ * terminated with '\n'. If the buffer is too small, some entries may be
+ * missing, but it is guaranteed that all lines in the output buffer are
+ * complete.
+ *
+ * Returns positive length of the filled-in string.
  */
 int svc_print_xprts(char *buf, int maxlen)
 {
@@ -118,9 +127,9 @@ int svc_print_xprts(char *buf, int maxlen)
 	list_for_each_entry(xcl, &svc_xprt_class_list, xcl_list) {
 		int slen;
 
-		sprintf(tmpstr, "%s %d\n", xcl->xcl_name, xcl->xcl_max_payload);
-		slen = strlen(tmpstr);
-		if (len + slen > maxlen)
+		slen = snprintf(tmpstr, sizeof(tmpstr), "%s %d\n",
+				xcl->xcl_name, xcl->xcl_max_payload);
+		if (slen >= sizeof(tmpstr) || len + slen >= maxlen)
 			break;
 		len += slen;
 		strcat(buf, tmpstr);
@@ -802,6 +811,8 @@ static int svc_handle_xprt(struct svc_rqst *rqstp, struct svc_xprt *xprt)
 			len = svc_deferred_recv(rqstp);
 		else
 			len = xprt->xpt_ops->xpo_recvfrom(rqstp);
+		if (len > 0)
+			trace_svc_recvfrom(&rqstp->rq_arg);
 		rqstp->rq_stime = ktime_get();
 		rqstp->rq_reserved = serv->sv_max_mesg;
 		atomic_add(rqstp->rq_reserved, &xprt->xpt_reserved);
@@ -905,6 +916,7 @@ int svc_send(struct svc_rqst *rqstp)
 	xb->len = xb->head[0].iov_len +
 		xb->page_len +
 		xb->tail[0].iov_len;
+	trace_svc_sendto(xb);
 
 	/* Grab mutex to serialize outgoing data. */
 	mutex_lock(&xprt->xpt_mutex);
diff --git a/net/sunrpc/svcauth_unix.c b/net/sunrpc/svcauth_unix.c
index 04aa80a..6c8f802 100644
--- a/net/sunrpc/svcauth_unix.c
+++ b/net/sunrpc/svcauth_unix.c
@@ -148,6 +148,11 @@ static struct cache_head *ip_map_alloc(void)
 		return NULL;
 }
 
+static int ip_map_upcall(struct cache_detail *cd, struct cache_head *h)
+{
+	return sunrpc_cache_pipe_upcall(cd, h);
+}
+
 static void ip_map_request(struct cache_detail *cd,
 				  struct cache_head *h,
 				  char **bpp, int *blen)
@@ -467,6 +472,11 @@ static struct cache_head *unix_gid_alloc(void)
 		return NULL;
 }
 
+static int unix_gid_upcall(struct cache_detail *cd, struct cache_head *h)
+{
+	return sunrpc_cache_pipe_upcall_timeout(cd, h);
+}
+
 static void unix_gid_request(struct cache_detail *cd,
 			     struct cache_head *h,
 			     char **bpp, int *blen)
@@ -584,6 +594,7 @@ static const struct cache_detail unix_gid_cache_template = {
 	.hash_size	= GID_HASHMAX,
 	.name		= "auth.unix.gid",
 	.cache_put	= unix_gid_put,
+	.cache_upcall	= unix_gid_upcall,
 	.cache_request	= unix_gid_request,
 	.cache_parse	= unix_gid_parse,
 	.cache_show	= unix_gid_show,
@@ -881,6 +892,7 @@ static const struct cache_detail ip_map_cache_template = {
 	.hash_size	= IP_HASHMAX,
 	.name		= "auth.unix.ip",
 	.cache_put	= ip_map_put,
+	.cache_upcall	= ip_map_upcall,
 	.cache_request	= ip_map_request,
 	.cache_parse	= ip_map_parse,
 	.cache_show	= ip_map_show,
diff --git a/net/sunrpc/svcsock.c b/net/sunrpc/svcsock.c
index 2934dd7..519cf9c 100644
--- a/net/sunrpc/svcsock.c
+++ b/net/sunrpc/svcsock.c
@@ -55,6 +55,7 @@
 #include <linux/sunrpc/stats.h>
 #include <linux/sunrpc/xprt.h>
 
+#include "socklib.h"
 #include "sunrpc.h"
 
 #define RPCDBG_FACILITY	RPCDBG_SVCXPRT
@@ -174,109 +175,10 @@ static void svc_set_cmsg_data(struct svc_rqst *rqstp, struct cmsghdr *cmh)
 	}
 }
 
-/*
- * send routine intended to be shared by the fore- and back-channel
- */
-int svc_send_common(struct socket *sock, struct xdr_buf *xdr,
-		    struct page *headpage, unsigned long headoffset,
-		    struct page *tailpage, unsigned long tailoffset)
+static int svc_sock_read_payload(struct svc_rqst *rqstp, unsigned int offset,
+				 unsigned int length)
 {
-	int		result;
-	int		size;
-	struct page	**ppage = xdr->pages;
-	size_t		base = xdr->page_base;
-	unsigned int	pglen = xdr->page_len;
-	unsigned int	flags = MSG_MORE | MSG_SENDPAGE_NOTLAST;
-	int		slen;
-	int		len = 0;
-
-	slen = xdr->len;
-
-	/* send head */
-	if (slen == xdr->head[0].iov_len)
-		flags = 0;
-	len = kernel_sendpage(sock, headpage, headoffset,
-				  xdr->head[0].iov_len, flags);
-	if (len != xdr->head[0].iov_len)
-		goto out;
-	slen -= xdr->head[0].iov_len;
-	if (slen == 0)
-		goto out;
-
-	/* send page data */
-	size = PAGE_SIZE - base < pglen ? PAGE_SIZE - base : pglen;
-	while (pglen > 0) {
-		if (slen == size)
-			flags = 0;
-		result = kernel_sendpage(sock, *ppage, base, size, flags);
-		if (result > 0)
-			len += result;
-		if (result != size)
-			goto out;
-		slen -= size;
-		pglen -= size;
-		size = PAGE_SIZE < pglen ? PAGE_SIZE : pglen;
-		base = 0;
-		ppage++;
-	}
-
-	/* send tail */
-	if (xdr->tail[0].iov_len) {
-		result = kernel_sendpage(sock, tailpage, tailoffset,
-				   xdr->tail[0].iov_len, 0);
-		if (result > 0)
-			len += result;
-	}
-
-out:
-	return len;
-}
-
-
-/*
- * Generic sendto routine
- */
-static int svc_sendto(struct svc_rqst *rqstp, struct xdr_buf *xdr)
-{
-	struct svc_sock	*svsk =
-		container_of(rqstp->rq_xprt, struct svc_sock, sk_xprt);
-	struct socket	*sock = svsk->sk_sock;
-	union {
-		struct cmsghdr	hdr;
-		long		all[SVC_PKTINFO_SPACE / sizeof(long)];
-	} buffer;
-	struct cmsghdr *cmh = &buffer.hdr;
-	int		len = 0;
-	unsigned long tailoff;
-	unsigned long headoff;
-	RPC_IFDEBUG(char buf[RPC_MAX_ADDRBUFLEN]);
-
-	if (rqstp->rq_prot == IPPROTO_UDP) {
-		struct msghdr msg = {
-			.msg_name	= &rqstp->rq_addr,
-			.msg_namelen	= rqstp->rq_addrlen,
-			.msg_control	= cmh,
-			.msg_controllen	= sizeof(buffer),
-			.msg_flags	= MSG_MORE,
-		};
-
-		svc_set_cmsg_data(rqstp, cmh);
-
-		if (sock_sendmsg(sock, &msg) < 0)
-			goto out;
-	}
-
-	tailoff = ((unsigned long)xdr->tail[0].iov_base) & (PAGE_SIZE-1);
-	headoff = 0;
-	len = svc_send_common(sock, xdr, rqstp->rq_respages[0], headoff,
-			       rqstp->rq_respages[0], tailoff);
-
-out:
-	dprintk("svc: socket %p sendto([%p %zu... ], %d) = %d (addr %s)\n",
-		svsk, xdr->head[0].iov_base, xdr->head[0].iov_len,
-		xdr->len, len, svc_print_addr(rqstp, buf, sizeof(buf)));
-
-	return len;
+	return 0;
 }
 
 /*
@@ -600,17 +502,43 @@ static int svc_udp_recvfrom(struct svc_rqst *rqstp)
 	return 0;
 }
 
-static int
-svc_udp_sendto(struct svc_rqst *rqstp)
+/**
+ * svc_udp_sendto - Send out a reply on a UDP socket
+ * @rqstp: completed svc_rqst
+ *
+ * Returns the number of bytes sent, or a negative errno.
+ */
+static int svc_udp_sendto(struct svc_rqst *rqstp)
 {
-	int		error;
+	struct svc_xprt *xprt = rqstp->rq_xprt;
+	struct svc_sock	*svsk = container_of(xprt, struct svc_sock, sk_xprt);
+	struct xdr_buf *xdr = &rqstp->rq_res;
+	union {
+		struct cmsghdr	hdr;
+		long		all[SVC_PKTINFO_SPACE / sizeof(long)];
+	} buffer;
+	struct cmsghdr *cmh = &buffer.hdr;
+	struct msghdr msg = {
+		.msg_name	= &rqstp->rq_addr,
+		.msg_namelen	= rqstp->rq_addrlen,
+		.msg_control	= cmh,
+		.msg_controllen	= sizeof(buffer),
+	};
+	unsigned int uninitialized_var(sent);
+	int err;
 
-	error = svc_sendto(rqstp, &rqstp->rq_res);
-	if (error == -ECONNREFUSED)
+	svc_set_cmsg_data(rqstp, cmh);
+
+	err = xprt_sock_sendmsg(svsk->sk_sock, &msg, xdr, 0, 0, &sent);
+	xdr_free_bvec(xdr);
+	if (err == -ECONNREFUSED) {
 		/* ICMP error on earlier request. */
-		error = svc_sendto(rqstp, &rqstp->rq_res);
-
-	return error;
+		err = xprt_sock_sendmsg(svsk->sk_sock, &msg, xdr, 0, 0, &sent);
+		xdr_free_bvec(xdr);
+	}
+	if (err < 0)
+		return err;
+	return sent;
 }
 
 static int svc_udp_has_wspace(struct svc_xprt *xprt)
@@ -653,6 +581,7 @@ static const struct svc_xprt_ops svc_udp_ops = {
 	.xpo_create = svc_udp_create,
 	.xpo_recvfrom = svc_udp_recvfrom,
 	.xpo_sendto = svc_udp_sendto,
+	.xpo_read_payload = svc_sock_read_payload,
 	.xpo_release_rqst = svc_release_udp_skb,
 	.xpo_detach = svc_sock_detach,
 	.xpo_free = svc_sock_free,
@@ -1128,35 +1057,39 @@ static int svc_tcp_recvfrom(struct svc_rqst *rqstp)
 	return 0;	/* record not complete */
 }
 
-/*
- * Send out data on TCP socket.
+/**
+ * svc_tcp_sendto - Send out a reply on a TCP socket
+ * @rqstp: completed svc_rqst
+ *
+ * Returns the number of bytes sent, or a negative errno.
  */
 static int svc_tcp_sendto(struct svc_rqst *rqstp)
 {
-	struct xdr_buf	*xbufp = &rqstp->rq_res;
-	int sent;
-	__be32 reclen;
+	struct svc_xprt *xprt = rqstp->rq_xprt;
+	struct svc_sock	*svsk = container_of(xprt, struct svc_sock, sk_xprt);
+	struct xdr_buf *xdr = &rqstp->rq_res;
+	rpc_fraghdr marker = cpu_to_be32(RPC_LAST_STREAM_FRAGMENT |
+					 (u32)xdr->len);
+	struct msghdr msg = {
+		.msg_flags	= 0,
+	};
+	unsigned int uninitialized_var(sent);
+	int err;
 
-	/* Set up the first element of the reply kvec.
-	 * Any other kvecs that may be in use have been taken
-	 * care of by the server implementation itself.
-	 */
-	reclen = htonl(0x80000000|((xbufp->len ) - 4));
-	memcpy(xbufp->head[0].iov_base, &reclen, 4);
-
-	sent = svc_sendto(rqstp, &rqstp->rq_res);
-	if (sent != xbufp->len) {
-		printk(KERN_NOTICE
-		       "rpc-srv/tcp: %s: %s %d when sending %d bytes "
-		       "- shutting down socket\n",
-		       rqstp->rq_xprt->xpt_server->sv_name,
-		       (sent<0)?"got error":"sent only",
-		       sent, xbufp->len);
-		set_bit(XPT_CLOSE, &rqstp->rq_xprt->xpt_flags);
-		svc_xprt_enqueue(rqstp->rq_xprt);
-		sent = -EAGAIN;
-	}
+	err = xprt_sock_sendmsg(svsk->sk_sock, &msg, xdr, 0, marker, &sent);
+	xdr_free_bvec(xdr);
+	if (err < 0 || sent != (xdr->len + sizeof(marker)))
+		goto out_close;
 	return sent;
+
+out_close:
+	pr_notice("rpc-srv/tcp: %s: %s %d when sending %d bytes - shutting down socket\n",
+		  xprt->xpt_server->sv_name,
+		  (err < 0) ? "got error" : "sent",
+		  (err < 0) ? err : sent, xdr->len);
+	set_bit(XPT_CLOSE, &xprt->xpt_flags);
+	svc_xprt_enqueue(xprt);
+	return -EAGAIN;
 }
 
 static struct svc_xprt *svc_tcp_create(struct svc_serv *serv,
@@ -1171,6 +1104,7 @@ static const struct svc_xprt_ops svc_tcp_ops = {
 	.xpo_create = svc_tcp_create,
 	.xpo_recvfrom = svc_tcp_recvfrom,
 	.xpo_sendto = svc_tcp_sendto,
+	.xpo_read_payload = svc_sock_read_payload,
 	.xpo_release_rqst = svc_release_skb,
 	.xpo_detach = svc_tcp_sock_detach,
 	.xpo_free = svc_sock_free,
diff --git a/net/sunrpc/xdr.c b/net/sunrpc/xdr.c
index e5497dc..15b58c5 100644
--- a/net/sunrpc/xdr.c
+++ b/net/sunrpc/xdr.c
@@ -1235,61 +1235,6 @@ xdr_encode_word(struct xdr_buf *buf, unsigned int base, u32 obj)
 }
 EXPORT_SYMBOL_GPL(xdr_encode_word);
 
-/**
- * xdr_buf_read_mic() - obtain the address of the GSS mic from xdr buf
- * @buf: pointer to buffer containing a mic
- * @mic: on success, returns the address of the mic
- * @offset: the offset in buf where mic may be found
- *
- * This function may modify the xdr buf if the mic is found to be straddling
- * a boundary between head, pages, and tail.  On success the mic can be read
- * from the address returned.  There is no need to free the mic.
- *
- * Return: Success returns 0, otherwise an integer error.
- */
-int xdr_buf_read_mic(struct xdr_buf *buf, struct xdr_netobj *mic, unsigned int offset)
-{
-	struct xdr_buf subbuf;
-	unsigned int boundary;
-
-	if (xdr_decode_word(buf, offset, &mic->len))
-		return -EFAULT;
-	offset += 4;
-
-	/* Is the mic partially in the head? */
-	boundary = buf->head[0].iov_len;
-	if (offset < boundary && (offset + mic->len) > boundary)
-		xdr_shift_buf(buf, boundary - offset);
-
-	/* Is the mic partially in the pages? */
-	boundary += buf->page_len;
-	if (offset < boundary && (offset + mic->len) > boundary)
-		xdr_shrink_pagelen(buf, boundary - offset);
-
-	if (xdr_buf_subsegment(buf, &subbuf, offset, mic->len))
-		return -EFAULT;
-
-	/* Is the mic contained entirely in the head? */
-	mic->data = subbuf.head[0].iov_base;
-	if (subbuf.head[0].iov_len == mic->len)
-		return 0;
-	/* ..or is the mic contained entirely in the tail? */
-	mic->data = subbuf.tail[0].iov_base;
-	if (subbuf.tail[0].iov_len == mic->len)
-		return 0;
-
-	/* Find a contiguous area in @buf to hold all of @mic */
-	if (mic->len > buf->buflen - buf->len)
-		return -ENOMEM;
-	if (buf->tail[0].iov_len != 0)
-		mic->data = buf->tail[0].iov_base + buf->tail[0].iov_len;
-	else
-		mic->data = buf->head[0].iov_base + buf->head[0].iov_len;
-	__read_bytes_from_xdr_buf(&subbuf, mic->data, mic->len);
-	return 0;
-}
-EXPORT_SYMBOL_GPL(xdr_buf_read_mic);
-
 /* Returns 0 on success, or else a negative error code. */
 static int
 xdr_xcode_array2(struct xdr_buf *buf, unsigned int base,
diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c
index 1aafe8d..493a30a 100644
--- a/net/sunrpc/xprt.c
+++ b/net/sunrpc/xprt.c
@@ -1117,8 +1117,6 @@ void xprt_complete_rqst(struct rpc_task *task, int copied)
 	struct rpc_rqst *req = task->tk_rqstp;
 	struct rpc_xprt *xprt = req->rq_xprt;
 
-	dprintk("RPC: %5u xid %08x complete (%d bytes received)\n",
-			task->tk_pid, ntohl(req->rq_xid), copied);
 	trace_xprt_complete_rqst(xprt, req->rq_xid, copied);
 
 	xprt->stat.recvs++;
@@ -1462,6 +1460,7 @@ xprt_request_transmit(struct rpc_rqst *req, struct rpc_task *snd_task)
 	 */
 	req->rq_ntrans++;
 
+	trace_xprt_sendto(&req->rq_snd_buf);
 	connect_cookie = xprt->connect_cookie;
 	status = xprt->ops->send_request(req);
 	if (status != 0) {
diff --git a/net/sunrpc/xprtrdma/backchannel.c b/net/sunrpc/xprtrdma/backchannel.c
index 1a0ae0c..c92c1aa 100644
--- a/net/sunrpc/xprtrdma/backchannel.c
+++ b/net/sunrpc/xprtrdma/backchannel.c
@@ -44,10 +44,10 @@ int xprt_rdma_bc_setup(struct rpc_xprt *xprt, unsigned int reqs)
 size_t xprt_rdma_bc_maxpayload(struct rpc_xprt *xprt)
 {
 	struct rpcrdma_xprt *r_xprt = rpcx_to_rdmax(xprt);
-	struct rpcrdma_ep *ep = &r_xprt->rx_ep;
+	struct rpcrdma_ep *ep = r_xprt->rx_ep;
 	size_t maxmsg;
 
-	maxmsg = min_t(unsigned int, ep->rep_inline_send, ep->rep_inline_recv);
+	maxmsg = min_t(unsigned int, ep->re_inline_send, ep->re_inline_recv);
 	maxmsg = min_t(unsigned int, maxmsg, PAGE_SIZE);
 	return maxmsg - RPCRDMA_HDRLEN_MIN;
 }
@@ -115,7 +115,7 @@ int xprt_rdma_bc_send_reply(struct rpc_rqst *rqst)
 	if (rc < 0)
 		goto failed_marshal;
 
-	if (rpcrdma_ep_post(&r_xprt->rx_ia, &r_xprt->rx_ep, req))
+	if (rpcrdma_post_sends(r_xprt, req))
 		goto drop_connection;
 	return 0;
 
@@ -190,7 +190,7 @@ static struct rpc_rqst *rpcrdma_bc_rqst_get(struct rpcrdma_xprt *r_xprt)
 	if (xprt->bc_alloc_count >= RPCRDMA_BACKWARD_WRS)
 		return NULL;
 
-	size = min_t(size_t, r_xprt->rx_ep.rep_inline_recv, PAGE_SIZE);
+	size = min_t(size_t, r_xprt->rx_ep->re_inline_recv, PAGE_SIZE);
 	req = rpcrdma_req_create(r_xprt, size, GFP_KERNEL);
 	if (!req)
 		return NULL;
diff --git a/net/sunrpc/xprtrdma/frwr_ops.c b/net/sunrpc/xprtrdma/frwr_ops.c
index 125297c..ef99788 100644
--- a/net/sunrpc/xprtrdma/frwr_ops.c
+++ b/net/sunrpc/xprtrdma/frwr_ops.c
@@ -52,7 +52,7 @@
 
 /**
  * frwr_release_mr - Destroy one MR
- * @mr: MR allocated by frwr_init_mr
+ * @mr: MR allocated by frwr_mr_init
  *
  */
 void frwr_release_mr(struct rpcrdma_mr *mr)
@@ -74,7 +74,7 @@ static void frwr_mr_recycle(struct rpcrdma_mr *mr)
 
 	if (mr->mr_dir != DMA_NONE) {
 		trace_xprtrdma_mr_unmap(mr);
-		ib_dma_unmap_sg(r_xprt->rx_ia.ri_id->device,
+		ib_dma_unmap_sg(r_xprt->rx_ep->re_id->device,
 				mr->mr_sg, mr->mr_nents, mr->mr_dir);
 		mr->mr_dir = DMA_NONE;
 	}
@@ -106,21 +106,22 @@ void frwr_reset(struct rpcrdma_req *req)
 }
 
 /**
- * frwr_init_mr - Initialize one MR
- * @ia: interface adapter
+ * frwr_mr_init - Initialize one MR
+ * @r_xprt: controlling transport instance
  * @mr: generic MR to prepare for FRWR
  *
  * Returns zero if successful. Otherwise a negative errno
  * is returned.
  */
-int frwr_init_mr(struct rpcrdma_ia *ia, struct rpcrdma_mr *mr)
+int frwr_mr_init(struct rpcrdma_xprt *r_xprt, struct rpcrdma_mr *mr)
 {
-	unsigned int depth = ia->ri_max_frwr_depth;
+	struct rpcrdma_ep *ep = r_xprt->rx_ep;
+	unsigned int depth = ep->re_max_fr_depth;
 	struct scatterlist *sg;
 	struct ib_mr *frmr;
 	int rc;
 
-	frmr = ib_alloc_mr(ia->ri_pd, ia->ri_mrtype, depth);
+	frmr = ib_alloc_mr(ep->re_pd, ep->re_mrtype, depth);
 	if (IS_ERR(frmr))
 		goto out_mr_err;
 
@@ -128,6 +129,7 @@ int frwr_init_mr(struct rpcrdma_ia *ia, struct rpcrdma_mr *mr)
 	if (!sg)
 		goto out_list_err;
 
+	mr->mr_xprt = r_xprt;
 	mr->frwr.fr_mr = frmr;
 	mr->mr_dir = DMA_NONE;
 	INIT_LIST_HEAD(&mr->mr_list);
@@ -149,29 +151,24 @@ int frwr_init_mr(struct rpcrdma_ia *ia, struct rpcrdma_mr *mr)
 
 /**
  * frwr_query_device - Prepare a transport for use with FRWR
- * @r_xprt: controlling transport instance
+ * @ep: endpoint to fill in
  * @device: RDMA device to query
  *
  * On success, sets:
- *	ep->rep_attr
- *	ep->rep_max_requests
- *	ia->ri_max_rdma_segs
- *
- * And these FRWR-related fields:
- *	ia->ri_max_frwr_depth
- *	ia->ri_mrtype
+ *	ep->re_attr
+ *	ep->re_max_requests
+ *	ep->re_max_rdma_segs
+ *	ep->re_max_fr_depth
+ *	ep->re_mrtype
  *
  * Return values:
  *   On success, returns zero.
  *   %-EINVAL - the device does not support FRWR memory registration
  *   %-ENOMEM - the device is not sufficiently capable for NFS/RDMA
  */
-int frwr_query_device(struct rpcrdma_xprt *r_xprt,
-		      const struct ib_device *device)
+int frwr_query_device(struct rpcrdma_ep *ep, const struct ib_device *device)
 {
 	const struct ib_device_attr *attrs = &device->attrs;
-	struct rpcrdma_ia *ia = &r_xprt->rx_ia;
-	struct rpcrdma_ep *ep = &r_xprt->rx_ep;
 	int max_qp_wr, depth, delta;
 	unsigned int max_sge;
 
@@ -188,23 +185,23 @@ int frwr_query_device(struct rpcrdma_xprt *r_xprt,
 		pr_err("rpcrdma: HCA provides only %u send SGEs\n", max_sge);
 		return -ENOMEM;
 	}
-	ep->rep_attr.cap.max_send_sge = max_sge;
-	ep->rep_attr.cap.max_recv_sge = 1;
+	ep->re_attr.cap.max_send_sge = max_sge;
+	ep->re_attr.cap.max_recv_sge = 1;
 
-	ia->ri_mrtype = IB_MR_TYPE_MEM_REG;
+	ep->re_mrtype = IB_MR_TYPE_MEM_REG;
 	if (attrs->device_cap_flags & IB_DEVICE_SG_GAPS_REG)
-		ia->ri_mrtype = IB_MR_TYPE_SG_GAPS;
+		ep->re_mrtype = IB_MR_TYPE_SG_GAPS;
 
 	/* Quirk: Some devices advertise a large max_fast_reg_page_list_len
 	 * capability, but perform optimally when the MRs are not larger
 	 * than a page.
 	 */
 	if (attrs->max_sge_rd > RPCRDMA_MAX_HDR_SEGS)
-		ia->ri_max_frwr_depth = attrs->max_sge_rd;
+		ep->re_max_fr_depth = attrs->max_sge_rd;
 	else
-		ia->ri_max_frwr_depth = attrs->max_fast_reg_page_list_len;
-	if (ia->ri_max_frwr_depth > RPCRDMA_MAX_DATA_SEGS)
-		ia->ri_max_frwr_depth = RPCRDMA_MAX_DATA_SEGS;
+		ep->re_max_fr_depth = attrs->max_fast_reg_page_list_len;
+	if (ep->re_max_fr_depth > RPCRDMA_MAX_DATA_SEGS)
+		ep->re_max_fr_depth = RPCRDMA_MAX_DATA_SEGS;
 
 	/* Add room for frwr register and invalidate WRs.
 	 * 1. FRWR reg WR for head
@@ -220,11 +217,11 @@ int frwr_query_device(struct rpcrdma_xprt *r_xprt,
 	/* Calculate N if the device max FRWR depth is smaller than
 	 * RPCRDMA_MAX_DATA_SEGS.
 	 */
-	if (ia->ri_max_frwr_depth < RPCRDMA_MAX_DATA_SEGS) {
-		delta = RPCRDMA_MAX_DATA_SEGS - ia->ri_max_frwr_depth;
+	if (ep->re_max_fr_depth < RPCRDMA_MAX_DATA_SEGS) {
+		delta = RPCRDMA_MAX_DATA_SEGS - ep->re_max_fr_depth;
 		do {
 			depth += 2; /* FRWR reg + invalidate */
-			delta -= ia->ri_max_frwr_depth;
+			delta -= ep->re_max_fr_depth;
 		} while (delta > 0);
 	}
 
@@ -233,34 +230,34 @@ int frwr_query_device(struct rpcrdma_xprt *r_xprt,
 	max_qp_wr -= 1;
 	if (max_qp_wr < RPCRDMA_MIN_SLOT_TABLE)
 		return -ENOMEM;
-	if (ep->rep_max_requests > max_qp_wr)
-		ep->rep_max_requests = max_qp_wr;
-	ep->rep_attr.cap.max_send_wr = ep->rep_max_requests * depth;
-	if (ep->rep_attr.cap.max_send_wr > max_qp_wr) {
-		ep->rep_max_requests = max_qp_wr / depth;
-		if (!ep->rep_max_requests)
+	if (ep->re_max_requests > max_qp_wr)
+		ep->re_max_requests = max_qp_wr;
+	ep->re_attr.cap.max_send_wr = ep->re_max_requests * depth;
+	if (ep->re_attr.cap.max_send_wr > max_qp_wr) {
+		ep->re_max_requests = max_qp_wr / depth;
+		if (!ep->re_max_requests)
 			return -ENOMEM;
-		ep->rep_attr.cap.max_send_wr = ep->rep_max_requests * depth;
+		ep->re_attr.cap.max_send_wr = ep->re_max_requests * depth;
 	}
-	ep->rep_attr.cap.max_send_wr += RPCRDMA_BACKWARD_WRS;
-	ep->rep_attr.cap.max_send_wr += 1; /* for ib_drain_sq */
-	ep->rep_attr.cap.max_recv_wr = ep->rep_max_requests;
-	ep->rep_attr.cap.max_recv_wr += RPCRDMA_BACKWARD_WRS;
-	ep->rep_attr.cap.max_recv_wr += 1; /* for ib_drain_rq */
+	ep->re_attr.cap.max_send_wr += RPCRDMA_BACKWARD_WRS;
+	ep->re_attr.cap.max_send_wr += 1; /* for ib_drain_sq */
+	ep->re_attr.cap.max_recv_wr = ep->re_max_requests;
+	ep->re_attr.cap.max_recv_wr += RPCRDMA_BACKWARD_WRS;
+	ep->re_attr.cap.max_recv_wr += 1; /* for ib_drain_rq */
 
-	ia->ri_max_rdma_segs =
-		DIV_ROUND_UP(RPCRDMA_MAX_DATA_SEGS, ia->ri_max_frwr_depth);
+	ep->re_max_rdma_segs =
+		DIV_ROUND_UP(RPCRDMA_MAX_DATA_SEGS, ep->re_max_fr_depth);
 	/* Reply chunks require segments for head and tail buffers */
-	ia->ri_max_rdma_segs += 2;
-	if (ia->ri_max_rdma_segs > RPCRDMA_MAX_HDR_SEGS)
-		ia->ri_max_rdma_segs = RPCRDMA_MAX_HDR_SEGS;
+	ep->re_max_rdma_segs += 2;
+	if (ep->re_max_rdma_segs > RPCRDMA_MAX_HDR_SEGS)
+		ep->re_max_rdma_segs = RPCRDMA_MAX_HDR_SEGS;
 
 	/* Ensure the underlying device is capable of conveying the
 	 * largest r/wsize NFS will ask for. This guarantees that
 	 * failing over from one RDMA device to another will not
 	 * break NFS I/O.
 	 */
-	if ((ia->ri_max_rdma_segs * ia->ri_max_frwr_depth) < RPCRDMA_MAX_SEGS)
+	if ((ep->re_max_rdma_segs * ep->re_max_fr_depth) < RPCRDMA_MAX_SEGS)
 		return -ENOMEM;
 
 	return 0;
@@ -286,14 +283,14 @@ struct rpcrdma_mr_seg *frwr_map(struct rpcrdma_xprt *r_xprt,
 				int nsegs, bool writing, __be32 xid,
 				struct rpcrdma_mr *mr)
 {
-	struct rpcrdma_ia *ia = &r_xprt->rx_ia;
+	struct rpcrdma_ep *ep = r_xprt->rx_ep;
 	struct ib_reg_wr *reg_wr;
 	int i, n, dma_nents;
 	struct ib_mr *ibmr;
 	u8 key;
 
-	if (nsegs > ia->ri_max_frwr_depth)
-		nsegs = ia->ri_max_frwr_depth;
+	if (nsegs > ep->re_max_fr_depth)
+		nsegs = ep->re_max_fr_depth;
 	for (i = 0; i < nsegs;) {
 		if (seg->mr_page)
 			sg_set_page(&mr->mr_sg[i],
@@ -306,7 +303,7 @@ struct rpcrdma_mr_seg *frwr_map(struct rpcrdma_xprt *r_xprt,
 
 		++seg;
 		++i;
-		if (ia->ri_mrtype == IB_MR_TYPE_SG_GAPS)
+		if (ep->re_mrtype == IB_MR_TYPE_SG_GAPS)
 			continue;
 		if ((i < nsegs && offset_in_page(seg->mr_offset)) ||
 		    offset_in_page((seg-1)->mr_offset + (seg-1)->mr_len))
@@ -315,7 +312,7 @@ struct rpcrdma_mr_seg *frwr_map(struct rpcrdma_xprt *r_xprt,
 	mr->mr_dir = rpcrdma_data_dir(writing);
 	mr->mr_nents = i;
 
-	dma_nents = ib_dma_map_sg(ia->ri_id->device, mr->mr_sg, mr->mr_nents,
+	dma_nents = ib_dma_map_sg(ep->re_id->device, mr->mr_sg, mr->mr_nents,
 				  mr->mr_dir);
 	if (!dma_nents)
 		goto out_dmamap_err;
@@ -356,8 +353,8 @@ struct rpcrdma_mr_seg *frwr_map(struct rpcrdma_xprt *r_xprt,
 
 /**
  * frwr_wc_fastreg - Invoked by RDMA provider for a flushed FastReg WC
- * @cq:	completion queue (ignored)
- * @wc:	completed WR
+ * @cq: completion queue
+ * @wc: WCE for a completed FastReg WR
  *
  */
 static void frwr_wc_fastreg(struct ib_cq *cq, struct ib_wc *wc)
@@ -369,20 +366,25 @@ static void frwr_wc_fastreg(struct ib_cq *cq, struct ib_wc *wc)
 	/* WARNING: Only wr_cqe and status are reliable at this point */
 	trace_xprtrdma_wc_fastreg(wc, frwr);
 	/* The MR will get recycled when the associated req is retransmitted */
+
+	rpcrdma_flush_disconnect(cq, wc);
 }
 
 /**
- * frwr_send - post Send WR containing the RPC Call message
- * @ia: interface adapter
- * @req: Prepared RPC Call
+ * frwr_send - post Send WRs containing the RPC Call message
+ * @r_xprt: controlling transport instance
+ * @req: prepared RPC Call
  *
  * For FRWR, chain any FastReg WRs to the Send WR. Only a
  * single ib_post_send call is needed to register memory
  * and then post the Send WR.
  *
- * Returns the result of ib_post_send.
+ * Returns the return code from ib_post_send.
+ *
+ * Caller must hold the transport send lock to ensure that the
+ * pointers to the transport's rdma_cm_id and QP are stable.
  */
-int frwr_send(struct rpcrdma_ia *ia, struct rpcrdma_req *req)
+int frwr_send(struct rpcrdma_xprt *r_xprt, struct rpcrdma_req *req)
 {
 	struct ib_send_wr *post_wr;
 	struct rpcrdma_mr *mr;
@@ -403,7 +405,7 @@ int frwr_send(struct rpcrdma_ia *ia, struct rpcrdma_req *req)
 		post_wr = &frwr->fr_regwr.wr;
 	}
 
-	return ib_post_send(ia->ri_id->qp, post_wr, NULL);
+	return ib_post_send(r_xprt->rx_ep->re_id->qp, post_wr, NULL);
 }
 
 /**
@@ -419,7 +421,7 @@ void frwr_reminv(struct rpcrdma_rep *rep, struct list_head *mrs)
 	list_for_each_entry(mr, mrs, mr_list)
 		if (mr->mr_handle == rep->rr_inv_rkey) {
 			list_del_init(&mr->mr_list);
-			trace_xprtrdma_mr_remoteinv(mr);
+			trace_xprtrdma_mr_reminv(mr);
 			rpcrdma_mr_put(mr);
 			break;	/* only one invalidated MR per RPC */
 		}
@@ -435,8 +437,8 @@ static void __frwr_release_mr(struct ib_wc *wc, struct rpcrdma_mr *mr)
 
 /**
  * frwr_wc_localinv - Invoked by RDMA provider for a LOCAL_INV WC
- * @cq:	completion queue (ignored)
- * @wc:	completed WR
+ * @cq: completion queue
+ * @wc: WCE for a completed LocalInv WR
  *
  */
 static void frwr_wc_localinv(struct ib_cq *cq, struct ib_wc *wc)
@@ -449,12 +451,14 @@ static void frwr_wc_localinv(struct ib_cq *cq, struct ib_wc *wc)
 	/* WARNING: Only wr_cqe and status are reliable at this point */
 	trace_xprtrdma_wc_li(wc, frwr);
 	__frwr_release_mr(wc, mr);
+
+	rpcrdma_flush_disconnect(cq, wc);
 }
 
 /**
  * frwr_wc_localinv_wake - Invoked by RDMA provider for a LOCAL_INV WC
- * @cq:	completion queue (ignored)
- * @wc:	completed WR
+ * @cq: completion queue
+ * @wc: WCE for a completed LocalInv WR
  *
  * Awaken anyone waiting for an MR to finish being fenced.
  */
@@ -469,6 +473,8 @@ static void frwr_wc_localinv_wake(struct ib_cq *cq, struct ib_wc *wc)
 	trace_xprtrdma_wc_li_wake(wc, frwr);
 	__frwr_release_mr(wc, mr);
 	complete(&frwr->fr_linv_done);
+
+	rpcrdma_flush_disconnect(cq, wc);
 }
 
 /**
@@ -526,10 +532,10 @@ void frwr_unmap_sync(struct rpcrdma_xprt *r_xprt, struct rpcrdma_req *req)
 
 	/* Transport disconnect drains the receive CQ before it
 	 * replaces the QP. The RPC reply handler won't call us
-	 * unless ri_id->qp is a valid pointer.
+	 * unless re_id->qp is a valid pointer.
 	 */
 	bad_wr = NULL;
-	rc = ib_post_send(r_xprt->rx_ia.ri_id->qp, first, &bad_wr);
+	rc = ib_post_send(r_xprt->rx_ep->re_id->qp, first, &bad_wr);
 
 	/* The final LOCAL_INV WR in the chain is supposed to
 	 * do the wake. If it was never posted, the wake will
@@ -556,8 +562,8 @@ void frwr_unmap_sync(struct rpcrdma_xprt *r_xprt, struct rpcrdma_req *req)
 
 /**
  * frwr_wc_localinv_done - Invoked by RDMA provider for a signaled LOCAL_INV WC
- * @cq:	completion queue (ignored)
- * @wc:	completed WR
+ * @cq:	completion queue
+ * @wc:	WCE for a completed LocalInv WR
  *
  */
 static void frwr_wc_localinv_done(struct ib_cq *cq, struct ib_wc *wc)
@@ -575,6 +581,8 @@ static void frwr_wc_localinv_done(struct ib_cq *cq, struct ib_wc *wc)
 	/* Ensure @rep is generated before __frwr_release_mr */
 	smp_rmb();
 	rpcrdma_complete_rqst(rep);
+
+	rpcrdma_flush_disconnect(cq, wc);
 }
 
 /**
@@ -629,10 +637,10 @@ void frwr_unmap_async(struct rpcrdma_xprt *r_xprt, struct rpcrdma_req *req)
 
 	/* Transport disconnect drains the receive CQ before it
 	 * replaces the QP. The RPC reply handler won't call us
-	 * unless ri_id->qp is a valid pointer.
+	 * unless re_id->qp is a valid pointer.
 	 */
 	bad_wr = NULL;
-	rc = ib_post_send(r_xprt->rx_ia.ri_id->qp, first, &bad_wr);
+	rc = ib_post_send(r_xprt->rx_ep->re_id->qp, first, &bad_wr);
 	if (!rc)
 		return;
 
diff --git a/net/sunrpc/xprtrdma/rpc_rdma.c b/net/sunrpc/xprtrdma/rpc_rdma.c
index 28020ec..4a81e69 100644
--- a/net/sunrpc/xprtrdma/rpc_rdma.c
+++ b/net/sunrpc/xprtrdma/rpc_rdma.c
@@ -103,21 +103,20 @@ static unsigned int rpcrdma_max_reply_header_size(unsigned int maxsegs)
 
 /**
  * rpcrdma_set_max_header_sizes - Initialize inline payload sizes
- * @r_xprt: transport instance to initialize
+ * @ep: endpoint to initialize
  *
  * The max_inline fields contain the maximum size of an RPC message
  * so the marshaling code doesn't have to repeat this calculation
  * for every RPC.
  */
-void rpcrdma_set_max_header_sizes(struct rpcrdma_xprt *r_xprt)
+void rpcrdma_set_max_header_sizes(struct rpcrdma_ep *ep)
 {
-	unsigned int maxsegs = r_xprt->rx_ia.ri_max_rdma_segs;
-	struct rpcrdma_ep *ep = &r_xprt->rx_ep;
+	unsigned int maxsegs = ep->re_max_rdma_segs;
 
-	ep->rep_max_inline_send =
-		ep->rep_inline_send - rpcrdma_max_call_header_size(maxsegs);
-	ep->rep_max_inline_recv =
-		ep->rep_inline_recv - rpcrdma_max_reply_header_size(maxsegs);
+	ep->re_max_inline_send =
+		ep->re_inline_send - rpcrdma_max_call_header_size(maxsegs);
+	ep->re_max_inline_recv =
+		ep->re_inline_recv - rpcrdma_max_reply_header_size(maxsegs);
 }
 
 /* The client can send a request inline as long as the RPCRDMA header
@@ -132,9 +131,10 @@ static bool rpcrdma_args_inline(struct rpcrdma_xprt *r_xprt,
 				struct rpc_rqst *rqst)
 {
 	struct xdr_buf *xdr = &rqst->rq_snd_buf;
+	struct rpcrdma_ep *ep = r_xprt->rx_ep;
 	unsigned int count, remaining, offset;
 
-	if (xdr->len > r_xprt->rx_ep.rep_max_inline_send)
+	if (xdr->len > ep->re_max_inline_send)
 		return false;
 
 	if (xdr->page_len) {
@@ -145,7 +145,7 @@ static bool rpcrdma_args_inline(struct rpcrdma_xprt *r_xprt,
 			remaining -= min_t(unsigned int,
 					   PAGE_SIZE - offset, remaining);
 			offset = 0;
-			if (++count > r_xprt->rx_ep.rep_attr.cap.max_send_sge)
+			if (++count > ep->re_attr.cap.max_send_sge)
 				return false;
 		}
 	}
@@ -162,7 +162,7 @@ static bool rpcrdma_args_inline(struct rpcrdma_xprt *r_xprt,
 static bool rpcrdma_results_inline(struct rpcrdma_xprt *r_xprt,
 				   struct rpc_rqst *rqst)
 {
-	return rqst->rq_rcv_buf.buflen <= r_xprt->rx_ep.rep_max_inline_recv;
+	return rqst->rq_rcv_buf.buflen <= r_xprt->rx_ep->re_max_inline_recv;
 }
 
 /* The client is required to provide a Reply chunk if the maximum
@@ -176,7 +176,7 @@ rpcrdma_nonpayload_inline(const struct rpcrdma_xprt *r_xprt,
 	const struct xdr_buf *buf = &rqst->rq_rcv_buf;
 
 	return (buf->head[0].iov_len + buf->tail[0].iov_len) <
-		r_xprt->rx_ep.rep_max_inline_recv;
+		r_xprt->rx_ep->re_max_inline_recv;
 }
 
 /* Split @vec on page boundaries into SGEs. FMR registers pages, not
@@ -255,7 +255,7 @@ rpcrdma_convert_iovs(struct rpcrdma_xprt *r_xprt, struct xdr_buf *xdrbuf,
 	/* When encoding a Read chunk, the tail iovec contains an
 	 * XDR pad and may be omitted.
 	 */
-	if (type == rpcrdma_readch && r_xprt->rx_ia.ri_implicit_roundup)
+	if (type == rpcrdma_readch && r_xprt->rx_ep->re_implicit_roundup)
 		goto out;
 
 	/* When encoding a Write chunk, some servers need to see an
@@ -263,7 +263,7 @@ rpcrdma_convert_iovs(struct rpcrdma_xprt *r_xprt, struct xdr_buf *xdrbuf,
 	 * layer provides space in the tail iovec that may be used
 	 * for this purpose.
 	 */
-	if (type == rpcrdma_writech && r_xprt->rx_ia.ri_implicit_roundup)
+	if (type == rpcrdma_writech && r_xprt->rx_ep->re_implicit_roundup)
 		goto out;
 
 	if (xdrbuf->tail[0].iov_len)
@@ -275,32 +275,6 @@ rpcrdma_convert_iovs(struct rpcrdma_xprt *r_xprt, struct xdr_buf *xdrbuf,
 	return n;
 }
 
-static inline int
-encode_item_present(struct xdr_stream *xdr)
-{
-	__be32 *p;
-
-	p = xdr_reserve_space(xdr, sizeof(*p));
-	if (unlikely(!p))
-		return -EMSGSIZE;
-
-	*p = xdr_one;
-	return 0;
-}
-
-static inline int
-encode_item_not_present(struct xdr_stream *xdr)
-{
-	__be32 *p;
-
-	p = xdr_reserve_space(xdr, sizeof(*p));
-	if (unlikely(!p))
-		return -EMSGSIZE;
-
-	*p = xdr_zero;
-	return 0;
-}
-
 static void
 xdr_encode_rdma_segment(__be32 *iptr, struct rpcrdma_mr *mr)
 {
@@ -414,7 +388,7 @@ static int rpcrdma_encode_read_list(struct rpcrdma_xprt *r_xprt,
 	} while (nsegs);
 
 done:
-	return encode_item_not_present(xdr);
+	return xdr_stream_encode_item_absent(xdr);
 }
 
 /* Register and XDR encode the Write list. Supports encoding a list
@@ -453,7 +427,7 @@ static int rpcrdma_encode_write_list(struct rpcrdma_xprt *r_xprt,
 	if (nsegs < 0)
 		return nsegs;
 
-	if (encode_item_present(xdr) < 0)
+	if (xdr_stream_encode_item_present(xdr) < 0)
 		return -EMSGSIZE;
 	segcount = xdr_reserve_space(xdr, sizeof(*segcount));
 	if (unlikely(!segcount))
@@ -480,7 +454,7 @@ static int rpcrdma_encode_write_list(struct rpcrdma_xprt *r_xprt,
 	*segcount = cpu_to_be32(nchunks);
 
 done:
-	return encode_item_not_present(xdr);
+	return xdr_stream_encode_item_absent(xdr);
 }
 
 /* Register and XDR encode the Reply chunk. Supports encoding an array
@@ -507,14 +481,14 @@ static int rpcrdma_encode_reply_chunk(struct rpcrdma_xprt *r_xprt,
 	__be32 *segcount;
 
 	if (wtype != rpcrdma_replych)
-		return encode_item_not_present(xdr);
+		return xdr_stream_encode_item_absent(xdr);
 
 	seg = req->rl_segments;
 	nsegs = rpcrdma_convert_iovs(r_xprt, &rqst->rq_rcv_buf, 0, wtype, seg);
 	if (nsegs < 0)
 		return nsegs;
 
-	if (encode_item_present(xdr) < 0)
+	if (xdr_stream_encode_item_present(xdr) < 0)
 		return -EMSGSIZE;
 	segcount = xdr_reserve_space(xdr, sizeof(*segcount));
 	if (unlikely(!segcount))
@@ -1476,8 +1450,8 @@ void rpcrdma_reply_handler(struct rpcrdma_rep *rep)
 
 	if (credits == 0)
 		credits = 1;	/* don't deadlock */
-	else if (credits > r_xprt->rx_ep.rep_max_requests)
-		credits = r_xprt->rx_ep.rep_max_requests;
+	else if (credits > r_xprt->rx_ep->re_max_requests)
+		credits = r_xprt->rx_ep->re_max_requests;
 	if (buf->rb_credits != credits)
 		rpcrdma_update_cwnd(r_xprt, credits);
 	rpcrdma_post_recvs(r_xprt, false);
diff --git a/net/sunrpc/xprtrdma/svc_rdma_backchannel.c b/net/sunrpc/xprtrdma/svc_rdma_backchannel.c
index 908e78b..d510a3a 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_backchannel.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_backchannel.c
@@ -117,7 +117,7 @@ static int svc_rdma_bc_sendto(struct svcxprt_rdma *rdma,
 {
 	int ret;
 
-	ret = svc_rdma_map_reply_msg(rdma, ctxt, &rqst->rq_snd_buf, NULL);
+	ret = svc_rdma_map_reply_msg(rdma, ctxt, NULL, &rqst->rq_snd_buf);
 	if (ret < 0)
 		return -EIO;
 
@@ -181,7 +181,9 @@ rpcrdma_bc_send_request(struct svcxprt_rdma *rdma, struct rpc_rqst *rqst)
 	if (!ctxt)
 		goto drop_connection;
 
-	p = ctxt->sc_xprt_buf;
+	p = xdr_reserve_space(&ctxt->sc_stream, RPCRDMA_HDRLEN_MIN);
+	if (!p)
+		goto put_ctxt;
 	*p++ = rqst->rq_xid;
 	*p++ = rpcrdma_version;
 	*p++ = cpu_to_be32(r_xprt->rx_buf.rb_bc_max_requests);
@@ -189,7 +191,6 @@ rpcrdma_bc_send_request(struct svcxprt_rdma *rdma, struct rpc_rqst *rqst)
 	*p++ = xdr_zero;
 	*p++ = xdr_zero;
 	*p   = xdr_zero;
-	svc_rdma_sync_reply_hdr(rdma, ctxt, RPCRDMA_HDRLEN_MIN);
 
 #ifdef SVCRDMA_BACKCHANNEL_DEBUG
 	pr_info("%s: %*ph\n", __func__, 64, rqst->rq_buffer);
@@ -197,12 +198,13 @@ rpcrdma_bc_send_request(struct svcxprt_rdma *rdma, struct rpc_rqst *rqst)
 
 	rqst->rq_xtime = ktime_get();
 	rc = svc_rdma_bc_sendto(rdma, rqst, ctxt);
-	if (rc) {
-		svc_rdma_send_ctxt_put(rdma, ctxt);
-		goto drop_connection;
-	}
+	if (rc)
+		goto put_ctxt;
 	return 0;
 
+put_ctxt:
+	svc_rdma_send_ctxt_put(rdma, ctxt);
+
 drop_connection:
 	dprintk("svcrdma: failed to send bc call\n");
 	return -ENOTCONN;
@@ -250,6 +252,7 @@ xprt_rdma_bc_put(struct rpc_xprt *xprt)
 {
 	dprintk("svcrdma: %s: xprt %p\n", __func__, xprt);
 
+	xprt_rdma_free_addresses(xprt);
 	xprt_free(xprt);
 }
 
diff --git a/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c b/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
index 96bccd3..54469b7 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
@@ -193,6 +193,7 @@ svc_rdma_recv_ctxt_get(struct svcxprt_rdma *rdma)
 
 out:
 	ctxt->rc_page_count = 0;
+	ctxt->rc_read_payload_length = 0;
 	return ctxt;
 
 out_empty:
@@ -357,15 +358,14 @@ static void svc_rdma_build_arg_xdr(struct svc_rqst *rqstp,
 	arg->len = ctxt->rc_byte_len;
 }
 
-/* This accommodates the largest possible Write chunk,
- * in one segment.
+/* This accommodates the largest possible Write chunk.
  */
-#define MAX_BYTES_WRITE_SEG	((u32)(RPCSVC_MAXPAGES << PAGE_SHIFT))
+#define MAX_BYTES_WRITE_CHUNK ((u32)(RPCSVC_MAXPAGES << PAGE_SHIFT))
 
 /* This accommodates the largest possible Position-Zero
- * Read chunk or Reply chunk, in one segment.
+ * Read chunk or Reply chunk.
  */
-#define MAX_BYTES_SPECIAL_SEG	((u32)((RPCSVC_MAXPAGES + 2) << PAGE_SHIFT))
+#define MAX_BYTES_SPECIAL_CHUNK ((u32)((RPCSVC_MAXPAGES + 2) << PAGE_SHIFT))
 
 /* Sanity check the Read list.
  *
@@ -373,7 +373,7 @@ static void svc_rdma_build_arg_xdr(struct svc_rqst *rqstp,
  * - This implementation supports only one Read chunk.
  *
  * Sanity checks:
- * - Read list does not overflow buffer.
+ * - Read list does not overflow Receive buffer.
  * - Segment size limited by largest NFS data payload.
  *
  * The segment count is limited to how many segments can
@@ -381,30 +381,44 @@ static void svc_rdma_build_arg_xdr(struct svc_rqst *rqstp,
  * buffer. That's about 40 Read segments for a 1KB inline
  * threshold.
  *
- * Returns pointer to the following Write list.
+ * Return values:
+ *       %true: Read list is valid. @rctxt's xdr_stream is updated
+ *		to point to the first byte past the Read list.
+ *      %false: Read list is corrupt. @rctxt's xdr_stream is left
+ *		in an unknown state.
  */
-static __be32 *xdr_check_read_list(__be32 *p, const __be32 *end)
+static bool xdr_check_read_list(struct svc_rdma_recv_ctxt *rctxt)
 {
-	u32 position;
+	u32 position, len;
 	bool first;
+	__be32 *p;
 
+	p = xdr_inline_decode(&rctxt->rc_stream, sizeof(*p));
+	if (!p)
+		return false;
+
+	len = 0;
 	first = true;
-	while (*p++ != xdr_zero) {
-		if (first) {
-			position = be32_to_cpup(p++);
-			first = false;
-		} else if (be32_to_cpup(p++) != position) {
-			return NULL;
-		}
-		p++;	/* handle */
-		if (be32_to_cpup(p++) > MAX_BYTES_SPECIAL_SEG)
-			return NULL;
-		p += 2;	/* offset */
+	while (*p != xdr_zero) {
+		p = xdr_inline_decode(&rctxt->rc_stream,
+				      rpcrdma_readseg_maxsz * sizeof(*p));
+		if (!p)
+			return false;
 
-		if (p > end)
-			return NULL;
+		if (first) {
+			position = be32_to_cpup(p);
+			first = false;
+		} else if (be32_to_cpup(p) != position) {
+			return false;
+		}
+		p += 2;
+		len += be32_to_cpup(p);
+
+		p = xdr_inline_decode(&rctxt->rc_stream, sizeof(*p));
+		if (!p)
+			return false;
 	}
-	return p;
+	return len <= MAX_BYTES_SPECIAL_CHUNK;
 }
 
 /* The segment count is limited to how many segments can
@@ -412,67 +426,100 @@ static __be32 *xdr_check_read_list(__be32 *p, const __be32 *end)
  * buffer. That's about 60 Write segments for a 1KB inline
  * threshold.
  */
-static __be32 *xdr_check_write_chunk(__be32 *p, const __be32 *end,
-				     u32 maxlen)
+static bool xdr_check_write_chunk(struct svc_rdma_recv_ctxt *rctxt, u32 maxlen)
 {
-	u32 i, segcount;
+	u32 i, segcount, total;
+	__be32 *p;
 
-	segcount = be32_to_cpup(p++);
+	p = xdr_inline_decode(&rctxt->rc_stream, sizeof(*p));
+	if (!p)
+		return false;
+	segcount = be32_to_cpup(p);
+
+	total = 0;
 	for (i = 0; i < segcount; i++) {
-		p++;	/* handle */
-		if (be32_to_cpup(p++) > maxlen)
-			return NULL;
-		p += 2;	/* offset */
+		u32 handle, length;
+		u64 offset;
 
-		if (p > end)
-			return NULL;
+		p = xdr_inline_decode(&rctxt->rc_stream,
+				      rpcrdma_segment_maxsz * sizeof(*p));
+		if (!p)
+			return false;
+
+		handle = be32_to_cpup(p++);
+		length = be32_to_cpup(p++);
+		xdr_decode_hyper(p, &offset);
+		trace_svcrdma_decode_wseg(handle, length, offset);
+
+		total += length;
 	}
-
-	return p;
+	return total <= maxlen;
 }
 
 /* Sanity check the Write list.
  *
  * Implementation limits:
- * - This implementation supports only one Write chunk.
+ * - This implementation currently supports only one Write chunk.
  *
  * Sanity checks:
- * - Write list does not overflow buffer.
- * - Segment size limited by largest NFS data payload.
+ * - Write list does not overflow Receive buffer.
+ * - Chunk size limited by largest NFS data payload.
  *
- * Returns pointer to the following Reply chunk.
+ * Return values:
+ *       %true: Write list is valid. @rctxt's xdr_stream is updated
+ *		to point to the first byte past the Write list.
+ *      %false: Write list is corrupt. @rctxt's xdr_stream is left
+ *		in an unknown state.
  */
-static __be32 *xdr_check_write_list(__be32 *p, const __be32 *end)
+static bool xdr_check_write_list(struct svc_rdma_recv_ctxt *rctxt)
 {
-	u32 chcount;
+	u32 chcount = 0;
+	__be32 *p;
 
-	chcount = 0;
-	while (*p++ != xdr_zero) {
-		p = xdr_check_write_chunk(p, end, MAX_BYTES_WRITE_SEG);
+	p = xdr_inline_decode(&rctxt->rc_stream, sizeof(*p));
+	if (!p)
+		return false;
+	rctxt->rc_write_list = p;
+	while (*p != xdr_zero) {
+		if (!xdr_check_write_chunk(rctxt, MAX_BYTES_WRITE_CHUNK))
+			return false;
+		++chcount;
+		p = xdr_inline_decode(&rctxt->rc_stream, sizeof(*p));
 		if (!p)
-			return NULL;
-		if (chcount++ > 1)
-			return NULL;
+			return false;
 	}
-	return p;
+	if (!chcount)
+		rctxt->rc_write_list = NULL;
+	return chcount < 2;
 }
 
 /* Sanity check the Reply chunk.
  *
  * Sanity checks:
- * - Reply chunk does not overflow buffer.
- * - Segment size limited by largest NFS data payload.
+ * - Reply chunk does not overflow Receive buffer.
+ * - Chunk size limited by largest NFS data payload.
  *
- * Returns pointer to the following RPC header.
+ * Return values:
+ *       %true: Reply chunk is valid. @rctxt's xdr_stream is updated
+ *		to point to the first byte past the Reply chunk.
+ *      %false: Reply chunk is corrupt. @rctxt's xdr_stream is left
+ *		in an unknown state.
  */
-static __be32 *xdr_check_reply_chunk(__be32 *p, const __be32 *end)
+static bool xdr_check_reply_chunk(struct svc_rdma_recv_ctxt *rctxt)
 {
-	if (*p++ != xdr_zero) {
-		p = xdr_check_write_chunk(p, end, MAX_BYTES_SPECIAL_SEG);
-		if (!p)
-			return NULL;
+	__be32 *p;
+
+	p = xdr_inline_decode(&rctxt->rc_stream, sizeof(*p));
+	if (!p)
+		return false;
+	rctxt->rc_reply_chunk = p;
+	if (*p != xdr_zero) {
+		if (!xdr_check_write_chunk(rctxt, MAX_BYTES_SPECIAL_CHUNK))
+			return false;
+	} else {
+		rctxt->rc_reply_chunk = NULL;
 	}
-	return p;
+	return true;
 }
 
 /* RPC-over-RDMA Version One private extension: Remote Invalidation.
@@ -537,60 +584,61 @@ static void svc_rdma_get_inv_rkey(struct svcxprt_rdma *rdma,
 	ctxt->rc_inv_rkey = be32_to_cpu(inv_rkey);
 }
 
-/* On entry, xdr->head[0].iov_base points to first byte in the
- * RPC-over-RDMA header.
+/**
+ * svc_rdma_xdr_decode_req - Decode the transport header
+ * @rq_arg: xdr_buf containing ingress RPC/RDMA message
+ * @rctxt: state of decoding
+ *
+ * On entry, xdr->head[0].iov_base points to first byte of the
+ * RPC-over-RDMA transport header.
  *
  * On successful exit, head[0] points to first byte past the
  * RPC-over-RDMA header. For RDMA_MSG, this is the RPC message.
+ *
  * The length of the RPC-over-RDMA header is returned.
  *
  * Assumptions:
  * - The transport header is entirely contained in the head iovec.
  */
-static int svc_rdma_xdr_decode_req(struct xdr_buf *rq_arg)
+static int svc_rdma_xdr_decode_req(struct xdr_buf *rq_arg,
+				   struct svc_rdma_recv_ctxt *rctxt)
 {
-	__be32 *p, *end, *rdma_argp;
+	__be32 *p, *rdma_argp;
 	unsigned int hdr_len;
 
-	/* Verify that there's enough bytes for header + something */
-	if (rq_arg->len <= RPCRDMA_HDRLEN_ERR)
-		goto out_short;
-
 	rdma_argp = rq_arg->head[0].iov_base;
-	if (*(rdma_argp + 1) != rpcrdma_version)
-		goto out_version;
+	xdr_init_decode(&rctxt->rc_stream, rq_arg, rdma_argp, NULL);
 
-	switch (*(rdma_argp + 3)) {
+	p = xdr_inline_decode(&rctxt->rc_stream,
+			      rpcrdma_fixed_maxsz * sizeof(*p));
+	if (unlikely(!p))
+		goto out_short;
+	p++;
+	if (*p != rpcrdma_version)
+		goto out_version;
+	p += 2;
+	switch (*p) {
 	case rdma_msg:
 		break;
 	case rdma_nomsg:
 		break;
-
 	case rdma_done:
 		goto out_drop;
-
 	case rdma_error:
 		goto out_drop;
-
 	default:
 		goto out_proc;
 	}
 
-	end = (__be32 *)((unsigned long)rdma_argp + rq_arg->len);
-	p = xdr_check_read_list(rdma_argp + 4, end);
-	if (!p)
+	if (!xdr_check_read_list(rctxt))
 		goto out_inval;
-	p = xdr_check_write_list(p, end);
-	if (!p)
+	if (!xdr_check_write_list(rctxt))
 		goto out_inval;
-	p = xdr_check_reply_chunk(p, end);
-	if (!p)
-		goto out_inval;
-	if (p > end)
+	if (!xdr_check_reply_chunk(rctxt))
 		goto out_inval;
 
-	rq_arg->head[0].iov_base = p;
-	hdr_len = (unsigned long)p - (unsigned long)rdma_argp;
+	rq_arg->head[0].iov_base = rctxt->rc_stream.p;
+	hdr_len = xdr_stream_pos(&rctxt->rc_stream);
 	rq_arg->head[0].iov_len -= hdr_len;
 	rq_arg->len -= hdr_len;
 	trace_svcrdma_decode_rqst(rdma_argp, hdr_len);
@@ -650,7 +698,6 @@ static void svc_rdma_send_error(struct svcxprt_rdma *xprt,
 				__be32 *rdma_argp, int status)
 {
 	struct svc_rdma_send_ctxt *ctxt;
-	unsigned int length;
 	__be32 *p;
 	int ret;
 
@@ -658,29 +705,46 @@ static void svc_rdma_send_error(struct svcxprt_rdma *xprt,
 	if (!ctxt)
 		return;
 
-	p = ctxt->sc_xprt_buf;
+	p = xdr_reserve_space(&ctxt->sc_stream,
+			      rpcrdma_fixed_maxsz * sizeof(*p));
+	if (!p)
+		goto put_ctxt;
+
 	*p++ = *rdma_argp;
 	*p++ = *(rdma_argp + 1);
 	*p++ = xprt->sc_fc_credits;
-	*p++ = rdma_error;
+	*p = rdma_error;
+
 	switch (status) {
 	case -EPROTONOSUPPORT:
+		p = xdr_reserve_space(&ctxt->sc_stream, 3 * sizeof(*p));
+		if (!p)
+			goto put_ctxt;
+
 		*p++ = err_vers;
 		*p++ = rpcrdma_version;
-		*p++ = rpcrdma_version;
+		*p = rpcrdma_version;
 		trace_svcrdma_err_vers(*rdma_argp);
 		break;
 	default:
-		*p++ = err_chunk;
+		p = xdr_reserve_space(&ctxt->sc_stream, sizeof(*p));
+		if (!p)
+			goto put_ctxt;
+
+		*p = err_chunk;
 		trace_svcrdma_err_chunk(*rdma_argp);
 	}
-	length = (unsigned long)p - (unsigned long)ctxt->sc_xprt_buf;
-	svc_rdma_sync_reply_hdr(xprt, ctxt, length);
 
+	ctxt->sc_send_wr.num_sge = 1;
 	ctxt->sc_send_wr.opcode = IB_WR_SEND;
+	ctxt->sc_sges[0].length = ctxt->sc_hdrbuf.len;
 	ret = svc_rdma_send(xprt, &ctxt->sc_send_wr);
 	if (ret)
-		svc_rdma_send_ctxt_put(xprt, ctxt);
+		goto put_ctxt;
+	return;
+
+put_ctxt:
+	svc_rdma_send_ctxt_put(xprt, ctxt);
 }
 
 /* By convention, backchannel calls arrive via rdma_msg type
@@ -785,7 +849,7 @@ int svc_rdma_recvfrom(struct svc_rqst *rqstp)
 	rqstp->rq_next_page = rqstp->rq_respages;
 
 	p = (__be32 *)rqstp->rq_arg.head[0].iov_base;
-	ret = svc_rdma_xdr_decode_req(&rqstp->rq_arg);
+	ret = svc_rdma_xdr_decode_req(&rqstp->rq_arg, ctxt);
 	if (ret < 0)
 		goto out_err;
 	if (ret == 0)
diff --git a/net/sunrpc/xprtrdma/svc_rdma_rw.c b/net/sunrpc/xprtrdma/svc_rdma_rw.c
index 48fe3b1..bd7c195 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_rw.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_rw.c
@@ -41,7 +41,7 @@ struct svc_rdma_rw_ctxt {
 	struct rdma_rw_ctx	rw_ctx;
 	int			rw_nents;
 	struct sg_table		rw_sg_table;
-	struct scatterlist	rw_first_sgl[0];
+	struct scatterlist	rw_first_sgl[];
 };
 
 static inline struct svc_rdma_rw_ctxt *
@@ -439,7 +439,8 @@ svc_rdma_build_writes(struct svc_rdma_write_info *info,
 		if (ret < 0)
 			goto out_initerr;
 
-		trace_svcrdma_encode_wseg(seg_handle, write_len, seg_offset);
+		trace_svcrdma_send_wseg(seg_handle, write_len, seg_offset);
+
 		list_add(&ctxt->rw_list, &cc->cc_rwctxts);
 		cc->cc_sqecount += ret;
 		if (write_len == seg_length - info->wi_seg_off) {
@@ -482,18 +483,19 @@ static int svc_rdma_send_xdr_kvec(struct svc_rdma_write_info *info,
 				     vec->iov_len);
 }
 
-/* Send an xdr_buf's page list by itself. A Write chunk is
- * just the page list. a Reply chunk is the head, page list,
- * and tail. This function is shared between the two types
- * of chunk.
+/* Send an xdr_buf's page list by itself. A Write chunk is just
+ * the page list. A Reply chunk is @xdr's head, page list, and
+ * tail. This function is shared between the two types of chunk.
  */
 static int svc_rdma_send_xdr_pagelist(struct svc_rdma_write_info *info,
-				      struct xdr_buf *xdr)
+				      struct xdr_buf *xdr,
+				      unsigned int offset,
+				      unsigned long length)
 {
 	info->wi_xdr = xdr;
-	info->wi_next_off = 0;
+	info->wi_next_off = offset - xdr->head[0].iov_len;
 	return svc_rdma_build_writes(info, svc_rdma_pagelist_to_sg,
-				     xdr->page_len);
+				     length);
 }
 
 /**
@@ -501,6 +503,8 @@ static int svc_rdma_send_xdr_pagelist(struct svc_rdma_write_info *info,
  * @rdma: controlling RDMA transport
  * @wr_ch: Write chunk provided by client
  * @xdr: xdr_buf containing the data payload
+ * @offset: payload's byte offset in @xdr
+ * @length: size of payload, in bytes
  *
  * Returns a non-negative number of bytes the chunk consumed, or
  *	%-E2BIG if the payload was larger than the Write chunk,
@@ -510,19 +514,20 @@ static int svc_rdma_send_xdr_pagelist(struct svc_rdma_write_info *info,
  *	%-EIO if rdma_rw initialization failed (DMA mapping, etc).
  */
 int svc_rdma_send_write_chunk(struct svcxprt_rdma *rdma, __be32 *wr_ch,
-			      struct xdr_buf *xdr)
+			      struct xdr_buf *xdr,
+			      unsigned int offset, unsigned long length)
 {
 	struct svc_rdma_write_info *info;
 	int ret;
 
-	if (!xdr->page_len)
+	if (!length)
 		return 0;
 
 	info = svc_rdma_write_info_alloc(rdma, wr_ch);
 	if (!info)
 		return -ENOMEM;
 
-	ret = svc_rdma_send_xdr_pagelist(info, xdr);
+	ret = svc_rdma_send_xdr_pagelist(info, xdr, offset, length);
 	if (ret < 0)
 		goto out_err;
 
@@ -530,8 +535,8 @@ int svc_rdma_send_write_chunk(struct svcxprt_rdma *rdma, __be32 *wr_ch,
 	if (ret < 0)
 		goto out_err;
 
-	trace_svcrdma_encode_write(xdr->page_len);
-	return xdr->page_len;
+	trace_svcrdma_send_write_chunk(xdr->page_len);
+	return length;
 
 out_err:
 	svc_rdma_write_info_free(info);
@@ -541,8 +546,7 @@ int svc_rdma_send_write_chunk(struct svcxprt_rdma *rdma, __be32 *wr_ch,
 /**
  * svc_rdma_send_reply_chunk - Write all segments in the Reply chunk
  * @rdma: controlling RDMA transport
- * @rp_ch: Reply chunk provided by client
- * @writelist: true if client provided a Write list
+ * @rctxt: Write and Reply chunks from client
  * @xdr: xdr_buf containing an RPC Reply
  *
  * Returns a non-negative number of bytes the chunk consumed, or
@@ -552,13 +556,14 @@ int svc_rdma_send_write_chunk(struct svcxprt_rdma *rdma, __be32 *wr_ch,
  *	%-ENOTCONN if posting failed (connection is lost),
  *	%-EIO if rdma_rw initialization failed (DMA mapping, etc).
  */
-int svc_rdma_send_reply_chunk(struct svcxprt_rdma *rdma, __be32 *rp_ch,
-			      bool writelist, struct xdr_buf *xdr)
+int svc_rdma_send_reply_chunk(struct svcxprt_rdma *rdma,
+			      const struct svc_rdma_recv_ctxt *rctxt,
+			      struct xdr_buf *xdr)
 {
 	struct svc_rdma_write_info *info;
 	int consumed, ret;
 
-	info = svc_rdma_write_info_alloc(rdma, rp_ch);
+	info = svc_rdma_write_info_alloc(rdma, rctxt->rc_reply_chunk);
 	if (!info)
 		return -ENOMEM;
 
@@ -570,8 +575,10 @@ int svc_rdma_send_reply_chunk(struct svcxprt_rdma *rdma, __be32 *rp_ch,
 	/* Send the page list in the Reply chunk only if the
 	 * client did not provide Write chunks.
 	 */
-	if (!writelist && xdr->page_len) {
-		ret = svc_rdma_send_xdr_pagelist(info, xdr);
+	if (!rctxt->rc_write_list && xdr->page_len) {
+		ret = svc_rdma_send_xdr_pagelist(info, xdr,
+						 xdr->head[0].iov_len,
+						 xdr->page_len);
 		if (ret < 0)
 			goto out_err;
 		consumed += xdr->page_len;
@@ -588,7 +595,7 @@ int svc_rdma_send_reply_chunk(struct svcxprt_rdma *rdma, __be32 *rp_ch,
 	if (ret < 0)
 		goto out_err;
 
-	trace_svcrdma_encode_reply(consumed);
+	trace_svcrdma_send_reply_chunk(consumed);
 	return consumed;
 
 out_err:
@@ -691,7 +698,7 @@ static int svc_rdma_build_read_chunk(struct svc_rqst *rqstp,
 		if (ret < 0)
 			break;
 
-		trace_svcrdma_encode_rseg(rs_handle, rs_length, rs_offset);
+		trace_svcrdma_send_rseg(rs_handle, rs_length, rs_offset);
 		info->ri_chunklen += rs_length;
 	}
 
@@ -722,7 +729,7 @@ static int svc_rdma_build_normal_read_chunk(struct svc_rqst *rqstp,
 	if (ret < 0)
 		goto out;
 
-	trace_svcrdma_encode_read(info->ri_chunklen, info->ri_position);
+	trace_svcrdma_send_read_chunk(info->ri_chunklen, info->ri_position);
 
 	head->rc_hdr_count = 0;
 
@@ -778,7 +785,7 @@ static int svc_rdma_build_pz_read_chunk(struct svc_rqst *rqstp,
 	if (ret < 0)
 		goto out;
 
-	trace_svcrdma_encode_pzr(info->ri_chunklen);
+	trace_svcrdma_send_pzr(info->ri_chunklen);
 
 	head->rc_arg.len += info->ri_chunklen;
 	head->rc_arg.buflen += info->ri_chunklen;
diff --git a/net/sunrpc/xprtrdma/svc_rdma_sendto.c b/net/sunrpc/xprtrdma/svc_rdma_sendto.c
index f3f1080..90cba30 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_sendto.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_sendto.c
@@ -151,6 +151,8 @@ svc_rdma_send_ctxt_alloc(struct svcxprt_rdma *rdma)
 	ctxt->sc_send_wr.send_flags = IB_SEND_SIGNALED;
 	ctxt->sc_cqe.done = svc_rdma_wc_send;
 	ctxt->sc_xprt_buf = buffer;
+	xdr_buf_init(&ctxt->sc_hdrbuf, ctxt->sc_xprt_buf,
+		     rdma->sc_max_req_size);
 	ctxt->sc_sges[0].addr = addr;
 
 	for (i = 0; i < rdma->sc_max_send_sges; i++)
@@ -204,6 +206,10 @@ struct svc_rdma_send_ctxt *svc_rdma_send_ctxt_get(struct svcxprt_rdma *rdma)
 	spin_unlock(&rdma->sc_send_lock);
 
 out:
+	rpcrdma_set_xdrlen(&ctxt->sc_hdrbuf, 0);
+	xdr_init_encode(&ctxt->sc_stream, &ctxt->sc_hdrbuf,
+			ctxt->sc_xprt_buf, NULL);
+
 	ctxt->sc_send_wr.num_sge = 0;
 	ctxt->sc_cur_sge_no = 0;
 	ctxt->sc_page_count = 0;
@@ -295,6 +301,12 @@ int svc_rdma_send(struct svcxprt_rdma *rdma, struct ib_send_wr *wr)
 
 	might_sleep();
 
+	/* Sync the transport header buffer */
+	ib_dma_sync_single_for_device(rdma->sc_pd->device,
+				      wr->sg_list[0].addr,
+				      wr->sg_list[0].length,
+				      DMA_TO_DEVICE);
+
 	/* If the SQ is full, wait until an SQ entry is available */
 	while (1) {
 		if ((atomic_dec_return(&rdma->sc_sq_avail) < 0)) {
@@ -322,166 +334,173 @@ int svc_rdma_send(struct svcxprt_rdma *rdma, struct ib_send_wr *wr)
 	return ret;
 }
 
-static u32 xdr_padsize(u32 len)
-{
-	return (len & 3) ? (4 - (len & 3)) : 0;
-}
-
-/* Returns length of transport header, in bytes.
- */
-static unsigned int svc_rdma_reply_hdr_len(__be32 *rdma_resp)
-{
-	unsigned int nsegs;
-	__be32 *p;
-
-	p = rdma_resp;
-
-	/* RPC-over-RDMA V1 replies never have a Read list. */
-	p += rpcrdma_fixed_maxsz + 1;
-
-	/* Skip Write list. */
-	while (*p++ != xdr_zero) {
-		nsegs = be32_to_cpup(p++);
-		p += nsegs * rpcrdma_segment_maxsz;
-	}
-
-	/* Skip Reply chunk. */
-	if (*p++ != xdr_zero) {
-		nsegs = be32_to_cpup(p++);
-		p += nsegs * rpcrdma_segment_maxsz;
-	}
-
-	return (unsigned long)p - (unsigned long)rdma_resp;
-}
-
-/* One Write chunk is copied from Call transport header to Reply
- * transport header. Each segment's length field is updated to
- * reflect number of bytes consumed in the segment.
+/**
+ * svc_rdma_encode_read_list - Encode RPC Reply's Read chunk list
+ * @sctxt: Send context for the RPC Reply
  *
- * Returns number of segments in this chunk.
+ * Return values:
+ *   On success, returns length in bytes of the Reply XDR buffer
+ *   that was consumed by the Reply Read list
+ *   %-EMSGSIZE on XDR buffer overflow
  */
-static unsigned int xdr_encode_write_chunk(__be32 *dst, __be32 *src,
+static ssize_t svc_rdma_encode_read_list(struct svc_rdma_send_ctxt *sctxt)
+{
+	/* RPC-over-RDMA version 1 replies never have a Read list. */
+	return xdr_stream_encode_item_absent(&sctxt->sc_stream);
+}
+
+/**
+ * svc_rdma_encode_write_segment - Encode one Write segment
+ * @src: matching Write chunk in the RPC Call header
+ * @sctxt: Send context for the RPC Reply
+ * @remaining: remaining bytes of the payload left in the Write chunk
+ *
+ * Return values:
+ *   On success, returns length in bytes of the Reply XDR buffer
+ *   that was consumed by the Write segment
+ *   %-EMSGSIZE on XDR buffer overflow
+ */
+static ssize_t svc_rdma_encode_write_segment(__be32 *src,
+					     struct svc_rdma_send_ctxt *sctxt,
+					     unsigned int *remaining)
+{
+	__be32 *p;
+	const size_t len = rpcrdma_segment_maxsz * sizeof(*p);
+	u32 handle, length;
+	u64 offset;
+
+	p = xdr_reserve_space(&sctxt->sc_stream, len);
+	if (!p)
+		return -EMSGSIZE;
+
+	handle = be32_to_cpup(src++);
+	length = be32_to_cpup(src++);
+	xdr_decode_hyper(src, &offset);
+
+	*p++ = cpu_to_be32(handle);
+	if (*remaining < length) {
+		/* segment only partly filled */
+		length = *remaining;
+		*remaining = 0;
+	} else {
+		/* entire segment was consumed */
+		*remaining -= length;
+	}
+	*p++ = cpu_to_be32(length);
+	xdr_encode_hyper(p, offset);
+
+	trace_svcrdma_encode_wseg(handle, length, offset);
+	return len;
+}
+
+/**
+ * svc_rdma_encode_write_chunk - Encode one Write chunk
+ * @src: matching Write chunk in the RPC Call header
+ * @sctxt: Send context for the RPC Reply
+ * @remaining: size in bytes of the payload in the Write chunk
+ *
+ * Copy a Write chunk from the Call transport header to the
+ * Reply transport header. Update each segment's length field
+ * to reflect the number of bytes written in that segment.
+ *
+ * Return values:
+ *   On success, returns length in bytes of the Reply XDR buffer
+ *   that was consumed by the Write chunk
+ *   %-EMSGSIZE on XDR buffer overflow
+ */
+static ssize_t svc_rdma_encode_write_chunk(__be32 *src,
+					   struct svc_rdma_send_ctxt *sctxt,
 					   unsigned int remaining)
 {
 	unsigned int i, nsegs;
-	u32 seg_len;
+	ssize_t len, ret;
 
-	/* Write list discriminator */
-	*dst++ = *src++;
+	len = 0;
+	trace_svcrdma_encode_write_chunk(remaining);
 
-	/* number of segments in this chunk */
-	nsegs = be32_to_cpup(src);
-	*dst++ = *src++;
+	src++;
+	ret = xdr_stream_encode_item_present(&sctxt->sc_stream);
+	if (ret < 0)
+		return -EMSGSIZE;
+	len += ret;
+
+	nsegs = be32_to_cpup(src++);
+	ret = xdr_stream_encode_u32(&sctxt->sc_stream, nsegs);
+	if (ret < 0)
+		return -EMSGSIZE;
+	len += ret;
 
 	for (i = nsegs; i; i--) {
-		/* segment's RDMA handle */
-		*dst++ = *src++;
-
-		/* bytes returned in this segment */
-		seg_len = be32_to_cpu(*src);
-		if (remaining >= seg_len) {
-			/* entire segment was consumed */
-			*dst = *src;
-			remaining -= seg_len;
-		} else {
-			/* segment only partly filled */
-			*dst = cpu_to_be32(remaining);
-			remaining = 0;
-		}
-		dst++; src++;
-
-		/* segment's RDMA offset */
-		*dst++ = *src++;
-		*dst++ = *src++;
+		ret = svc_rdma_encode_write_segment(src, sctxt, &remaining);
+		if (ret < 0)
+			return -EMSGSIZE;
+		src += rpcrdma_segment_maxsz;
+		len += ret;
 	}
 
-	return nsegs;
+	return len;
 }
 
-/* The client provided a Write list in the Call message. Fill in
- * the segments in the first Write chunk in the Reply's transport
+/**
+ * svc_rdma_encode_write_list - Encode RPC Reply's Write chunk list
+ * @rctxt: Reply context with information about the RPC Call
+ * @sctxt: Send context for the RPC Reply
+ * @length: size in bytes of the payload in the first Write chunk
+ *
+ * The client provides a Write chunk list in the Call message. Fill
+ * in the segments in the first Write chunk in the Reply's transport
  * header with the number of bytes consumed in each segment.
  * Remaining chunks are returned unused.
  *
  * Assumptions:
  *  - Client has provided only one Write chunk
+ *
+ * Return values:
+ *   On success, returns length in bytes of the Reply XDR buffer
+ *   that was consumed by the Reply's Write list
+ *   %-EMSGSIZE on XDR buffer overflow
  */
-static void svc_rdma_xdr_encode_write_list(__be32 *rdma_resp, __be32 *wr_ch,
-					   unsigned int consumed)
+static ssize_t
+svc_rdma_encode_write_list(const struct svc_rdma_recv_ctxt *rctxt,
+			   struct svc_rdma_send_ctxt *sctxt,
+			   unsigned int length)
 {
-	unsigned int nsegs;
-	__be32 *p, *q;
+	ssize_t len, ret;
 
-	/* RPC-over-RDMA V1 replies never have a Read list. */
-	p = rdma_resp + rpcrdma_fixed_maxsz + 1;
+	ret = svc_rdma_encode_write_chunk(rctxt->rc_write_list, sctxt, length);
+	if (ret < 0)
+		return ret;
+	len = ret;
 
-	q = wr_ch;
-	while (*q != xdr_zero) {
-		nsegs = xdr_encode_write_chunk(p, q, consumed);
-		q += 2 + nsegs * rpcrdma_segment_maxsz;
-		p += 2 + nsegs * rpcrdma_segment_maxsz;
-		consumed = 0;
-	}
+	/* Terminate the Write list */
+	ret = xdr_stream_encode_item_absent(&sctxt->sc_stream);
+	if (ret < 0)
+		return ret;
 
-	/* Terminate Write list */
-	*p++ = xdr_zero;
-
-	/* Reply chunk discriminator; may be replaced later */
-	*p = xdr_zero;
+	return len + ret;
 }
 
-/* The client provided a Reply chunk in the Call message. Fill in
- * the segments in the Reply chunk in the Reply message with the
- * number of bytes consumed in each segment.
+/**
+ * svc_rdma_encode_reply_chunk - Encode RPC Reply's Reply chunk
+ * @rctxt: Reply context with information about the RPC Call
+ * @sctxt: Send context for the RPC Reply
+ * @length: size in bytes of the payload in the Reply chunk
  *
  * Assumptions:
- * - Reply can always fit in the provided Reply chunk
+ * - Reply can always fit in the client-provided Reply chunk
+ *
+ * Return values:
+ *   On success, returns length in bytes of the Reply XDR buffer
+ *   that was consumed by the Reply's Reply chunk
+ *   %-EMSGSIZE on XDR buffer overflow
  */
-static void svc_rdma_xdr_encode_reply_chunk(__be32 *rdma_resp, __be32 *rp_ch,
-					    unsigned int consumed)
+static ssize_t
+svc_rdma_encode_reply_chunk(const struct svc_rdma_recv_ctxt *rctxt,
+			    struct svc_rdma_send_ctxt *sctxt,
+			    unsigned int length)
 {
-	__be32 *p;
-
-	/* Find the Reply chunk in the Reply's xprt header.
-	 * RPC-over-RDMA V1 replies never have a Read list.
-	 */
-	p = rdma_resp + rpcrdma_fixed_maxsz + 1;
-
-	/* Skip past Write list */
-	while (*p++ != xdr_zero)
-		p += 1 + be32_to_cpup(p) * rpcrdma_segment_maxsz;
-
-	xdr_encode_write_chunk(p, rp_ch, consumed);
-}
-
-/* Parse the RPC Call's transport header.
- */
-static void svc_rdma_get_write_arrays(__be32 *rdma_argp,
-				      __be32 **write, __be32 **reply)
-{
-	__be32 *p;
-
-	p = rdma_argp + rpcrdma_fixed_maxsz;
-
-	/* Read list */
-	while (*p++ != xdr_zero)
-		p += 5;
-
-	/* Write list */
-	if (*p != xdr_zero) {
-		*write = p;
-		while (*p++ != xdr_zero)
-			p += 1 + be32_to_cpu(*p) * 4;
-	} else {
-		*write = NULL;
-		p++;
-	}
-
-	/* Reply chunk */
-	if (*p != xdr_zero)
-		*reply = p;
-	else
-		*reply = NULL;
+	return svc_rdma_encode_write_chunk(rctxt->rc_reply_chunk, sctxt,
+					   length);
 }
 
 static int svc_rdma_dma_map_page(struct svcxprt_rdma *rdma,
@@ -520,38 +539,36 @@ static int svc_rdma_dma_map_buf(struct svcxprt_rdma *rdma,
 }
 
 /**
- * svc_rdma_sync_reply_hdr - DMA sync the transport header buffer
+ * svc_rdma_pull_up_needed - Determine whether to use pull-up
  * @rdma: controlling transport
- * @ctxt: send_ctxt for the Send WR
- * @len: length of transport header
+ * @sctxt: send_ctxt for the Send WR
+ * @rctxt: Write and Reply chunks provided by client
+ * @xdr: xdr_buf containing RPC message to transmit
  *
- */
-void svc_rdma_sync_reply_hdr(struct svcxprt_rdma *rdma,
-			     struct svc_rdma_send_ctxt *ctxt,
-			     unsigned int len)
-{
-	ctxt->sc_sges[0].length = len;
-	ctxt->sc_send_wr.num_sge++;
-	ib_dma_sync_single_for_device(rdma->sc_pd->device,
-				      ctxt->sc_sges[0].addr, len,
-				      DMA_TO_DEVICE);
-}
-
-/* If the xdr_buf has more elements than the device can
- * transmit in a single RDMA Send, then the reply will
- * have to be copied into a bounce buffer.
+ * Returns:
+ *	%true if pull-up must be used
+ *	%false otherwise
  */
 static bool svc_rdma_pull_up_needed(struct svcxprt_rdma *rdma,
-				    struct xdr_buf *xdr,
-				    __be32 *wr_lst)
+				    struct svc_rdma_send_ctxt *sctxt,
+				    const struct svc_rdma_recv_ctxt *rctxt,
+				    struct xdr_buf *xdr)
 {
 	int elements;
 
+	/* For small messages, copying bytes is cheaper than DMA mapping.
+	 */
+	if (sctxt->sc_hdrbuf.len + xdr->len < RPCRDMA_PULLUP_THRESH)
+		return true;
+
+	/* Check whether the xdr_buf has more elements than can
+	 * fit in a single RDMA Send.
+	 */
 	/* xdr->head */
 	elements = 1;
 
 	/* xdr->pages */
-	if (!wr_lst) {
+	if (!rctxt || !rctxt->rc_write_list) {
 		unsigned int remaining;
 		unsigned long pageoff;
 
@@ -573,29 +590,36 @@ static bool svc_rdma_pull_up_needed(struct svcxprt_rdma *rdma,
 	return elements >= rdma->sc_max_send_sges;
 }
 
-/* The device is not capable of sending the reply directly.
- * Assemble the elements of @xdr into the transport header
- * buffer.
+/**
+ * svc_rdma_pull_up_reply_msg - Copy Reply into a single buffer
+ * @rdma: controlling transport
+ * @sctxt: send_ctxt for the Send WR; xprt hdr is already prepared
+ * @rctxt: Write and Reply chunks provided by client
+ * @xdr: prepared xdr_buf containing RPC message
+ *
+ * The device is not capable of sending the reply directly.
+ * Assemble the elements of @xdr into the transport header buffer.
+ *
+ * Returns zero on success, or a negative errno on failure.
  */
 static int svc_rdma_pull_up_reply_msg(struct svcxprt_rdma *rdma,
-				      struct svc_rdma_send_ctxt *ctxt,
-				      struct xdr_buf *xdr, __be32 *wr_lst)
+				      struct svc_rdma_send_ctxt *sctxt,
+				      const struct svc_rdma_recv_ctxt *rctxt,
+				      const struct xdr_buf *xdr)
 {
 	unsigned char *dst, *tailbase;
 	unsigned int taillen;
 
-	dst = ctxt->sc_xprt_buf;
-	dst += ctxt->sc_sges[0].length;
-
+	dst = sctxt->sc_xprt_buf + sctxt->sc_hdrbuf.len;
 	memcpy(dst, xdr->head[0].iov_base, xdr->head[0].iov_len);
 	dst += xdr->head[0].iov_len;
 
 	tailbase = xdr->tail[0].iov_base;
 	taillen = xdr->tail[0].iov_len;
-	if (wr_lst) {
+	if (rctxt && rctxt->rc_write_list) {
 		u32 xdrpad;
 
-		xdrpad = xdr_padsize(xdr->page_len);
+		xdrpad = xdr_pad_size(xdr->page_len);
 		if (taillen && xdrpad) {
 			tailbase += xdrpad;
 			taillen -= xdrpad;
@@ -621,29 +645,26 @@ static int svc_rdma_pull_up_reply_msg(struct svcxprt_rdma *rdma,
 	if (taillen)
 		memcpy(dst, tailbase, taillen);
 
-	ctxt->sc_sges[0].length += xdr->len;
-	ib_dma_sync_single_for_device(rdma->sc_pd->device,
-				      ctxt->sc_sges[0].addr,
-				      ctxt->sc_sges[0].length,
-				      DMA_TO_DEVICE);
-
+	sctxt->sc_sges[0].length += xdr->len;
+	trace_svcrdma_send_pullup(sctxt->sc_sges[0].length);
 	return 0;
 }
 
-/* svc_rdma_map_reply_msg - Map the buffer holding RPC message
+/* svc_rdma_map_reply_msg - DMA map the buffer holding RPC message
  * @rdma: controlling transport
- * @ctxt: send_ctxt for the Send WR
+ * @sctxt: send_ctxt for the Send WR
+ * @rctxt: Write and Reply chunks provided by client
  * @xdr: prepared xdr_buf containing RPC message
- * @wr_lst: pointer to Call header's Write list, or NULL
  *
  * Load the xdr_buf into the ctxt's sge array, and DMA map each
- * element as it is added.
+ * element as it is added. The Send WR's num_sge field is set.
  *
  * Returns zero on success, or a negative errno on failure.
  */
 int svc_rdma_map_reply_msg(struct svcxprt_rdma *rdma,
-			   struct svc_rdma_send_ctxt *ctxt,
-			   struct xdr_buf *xdr, __be32 *wr_lst)
+			   struct svc_rdma_send_ctxt *sctxt,
+			   const struct svc_rdma_recv_ctxt *rctxt,
+			   struct xdr_buf *xdr)
 {
 	unsigned int len, remaining;
 	unsigned long page_off;
@@ -652,11 +673,24 @@ int svc_rdma_map_reply_msg(struct svcxprt_rdma *rdma,
 	u32 xdr_pad;
 	int ret;
 
-	if (svc_rdma_pull_up_needed(rdma, xdr, wr_lst))
-		return svc_rdma_pull_up_reply_msg(rdma, ctxt, xdr, wr_lst);
+	/* Set up the (persistently-mapped) transport header SGE. */
+	sctxt->sc_send_wr.num_sge = 1;
+	sctxt->sc_sges[0].length = sctxt->sc_hdrbuf.len;
 
-	++ctxt->sc_cur_sge_no;
-	ret = svc_rdma_dma_map_buf(rdma, ctxt,
+	/* If there is a Reply chunk, nothing follows the transport
+	 * header, and we're done here.
+	 */
+	if (rctxt && rctxt->rc_reply_chunk)
+		return 0;
+
+	/* For pull-up, svc_rdma_send() will sync the transport header.
+	 * No additional DMA mapping is necessary.
+	 */
+	if (svc_rdma_pull_up_needed(rdma, sctxt, rctxt, xdr))
+		return svc_rdma_pull_up_reply_msg(rdma, sctxt, rctxt, xdr);
+
+	++sctxt->sc_cur_sge_no;
+	ret = svc_rdma_dma_map_buf(rdma, sctxt,
 				   xdr->head[0].iov_base,
 				   xdr->head[0].iov_len);
 	if (ret < 0)
@@ -667,10 +701,10 @@ int svc_rdma_map_reply_msg(struct svcxprt_rdma *rdma,
 	 * have added XDR padding in the tail buffer, and that
 	 * should not be included inline.
 	 */
-	if (wr_lst) {
+	if (rctxt && rctxt->rc_write_list) {
 		base = xdr->tail[0].iov_base;
 		len = xdr->tail[0].iov_len;
-		xdr_pad = xdr_padsize(xdr->page_len);
+		xdr_pad = xdr_pad_size(xdr->page_len);
 
 		if (len && xdr_pad) {
 			base += xdr_pad;
@@ -686,8 +720,8 @@ int svc_rdma_map_reply_msg(struct svcxprt_rdma *rdma,
 	while (remaining) {
 		len = min_t(u32, PAGE_SIZE - page_off, remaining);
 
-		++ctxt->sc_cur_sge_no;
-		ret = svc_rdma_dma_map_page(rdma, ctxt, *ppages++,
+		++sctxt->sc_cur_sge_no;
+		ret = svc_rdma_dma_map_page(rdma, sctxt, *ppages++,
 					    page_off, len);
 		if (ret < 0)
 			return ret;
@@ -700,8 +734,8 @@ int svc_rdma_map_reply_msg(struct svcxprt_rdma *rdma,
 	len = xdr->tail[0].iov_len;
 tail:
 	if (len) {
-		++ctxt->sc_cur_sge_no;
-		ret = svc_rdma_dma_map_buf(rdma, ctxt, base, len);
+		++sctxt->sc_cur_sge_no;
+		ret = svc_rdma_dma_map_buf(rdma, sctxt, base, len);
 		if (ret < 0)
 			return ret;
 	}
@@ -748,18 +782,14 @@ static void svc_rdma_save_io_pages(struct svc_rqst *rqstp,
  */
 static int svc_rdma_send_reply_msg(struct svcxprt_rdma *rdma,
 				   struct svc_rdma_send_ctxt *sctxt,
-				   struct svc_rdma_recv_ctxt *rctxt,
-				   struct svc_rqst *rqstp,
-				   __be32 *wr_lst, __be32 *rp_ch)
+				   const struct svc_rdma_recv_ctxt *rctxt,
+				   struct svc_rqst *rqstp)
 {
 	int ret;
 
-	if (!rp_ch) {
-		ret = svc_rdma_map_reply_msg(rdma, sctxt,
-					     &rqstp->rq_res, wr_lst);
-		if (ret < 0)
-			return ret;
-	}
+	ret = svc_rdma_map_reply_msg(rdma, sctxt, rctxt, &rqstp->rq_res);
+	if (ret < 0)
+		return ret;
 
 	svc_rdma_save_io_pages(rqstp, sctxt);
 
@@ -769,8 +799,6 @@ static int svc_rdma_send_reply_msg(struct svcxprt_rdma *rdma,
 	} else {
 		sctxt->sc_send_wr.opcode = IB_WR_SEND;
 	}
-	dprintk("svcrdma: posting Send WR with %u sge(s)\n",
-		sctxt->sc_send_wr.num_sge);
 	return svc_rdma_send(rdma, &sctxt->sc_send_wr);
 }
 
@@ -785,26 +813,31 @@ static int svc_rdma_send_error_msg(struct svcxprt_rdma *rdma,
 				   struct svc_rdma_send_ctxt *ctxt,
 				   struct svc_rqst *rqstp)
 {
+	struct svc_rdma_recv_ctxt *rctxt = rqstp->rq_xprt_ctxt;
+	__be32 *rdma_argp = rctxt->rc_recv_buf;
 	__be32 *p;
-	int ret;
 
-	p = ctxt->sc_xprt_buf;
-	trace_svcrdma_err_chunk(*p);
-	p += 3;
+	rpcrdma_set_xdrlen(&ctxt->sc_hdrbuf, 0);
+	xdr_init_encode(&ctxt->sc_stream, &ctxt->sc_hdrbuf, ctxt->sc_xprt_buf,
+			NULL);
+
+	p = xdr_reserve_space(&ctxt->sc_stream, RPCRDMA_HDRLEN_ERR);
+	if (!p)
+		return -ENOMSG;
+
+	*p++ = *rdma_argp;
+	*p++ = *(rdma_argp + 1);
+	*p++ = rdma->sc_fc_credits;
 	*p++ = rdma_error;
 	*p   = err_chunk;
-	svc_rdma_sync_reply_hdr(rdma, ctxt, RPCRDMA_HDRLEN_ERR);
+	trace_svcrdma_err_chunk(*rdma_argp);
 
 	svc_rdma_save_io_pages(rqstp, ctxt);
 
+	ctxt->sc_send_wr.num_sge = 1;
 	ctxt->sc_send_wr.opcode = IB_WR_SEND;
-	ret = svc_rdma_send(rdma, &ctxt->sc_send_wr);
-	if (ret) {
-		svc_rdma_send_ctxt_put(rdma, ctxt);
-		return ret;
-	}
-
-	return 0;
+	ctxt->sc_sges[0].length = ctxt->sc_hdrbuf.len;
+	return svc_rdma_send(rdma, &ctxt->sc_send_wr);
 }
 
 /**
@@ -825,14 +858,14 @@ int svc_rdma_sendto(struct svc_rqst *rqstp)
 	struct svcxprt_rdma *rdma =
 		container_of(xprt, struct svcxprt_rdma, sc_xprt);
 	struct svc_rdma_recv_ctxt *rctxt = rqstp->rq_xprt_ctxt;
-	__be32 *p, *rdma_argp, *rdma_resp, *wr_lst, *rp_ch;
+	__be32 *rdma_argp = rctxt->rc_recv_buf;
+	__be32 *wr_lst = rctxt->rc_write_list;
+	__be32 *rp_ch = rctxt->rc_reply_chunk;
 	struct xdr_buf *xdr = &rqstp->rq_res;
 	struct svc_rdma_send_ctxt *sctxt;
+	__be32 *p;
 	int ret;
 
-	rdma_argp = rctxt->rc_recv_buf;
-	svc_rdma_get_write_arrays(rdma_argp, &wr_lst, &rp_ch);
-
 	/* Create the RDMA response header. xprt->xpt_mutex,
 	 * acquired in svc_send(), serializes RPC replies. The
 	 * code path below that inserts the credit grant value
@@ -843,36 +876,52 @@ int svc_rdma_sendto(struct svc_rqst *rqstp)
 	sctxt = svc_rdma_send_ctxt_get(rdma);
 	if (!sctxt)
 		goto err0;
-	rdma_resp = sctxt->sc_xprt_buf;
 
-	p = rdma_resp;
+	p = xdr_reserve_space(&sctxt->sc_stream,
+			      rpcrdma_fixed_maxsz * sizeof(*p));
+	if (!p)
+		goto err0;
 	*p++ = *rdma_argp;
 	*p++ = *(rdma_argp + 1);
 	*p++ = rdma->sc_fc_credits;
-	*p++ = rp_ch ? rdma_nomsg : rdma_msg;
+	*p   = rp_ch ? rdma_nomsg : rdma_msg;
 
-	/* Start with empty chunks */
-	*p++ = xdr_zero;
-	*p++ = xdr_zero;
-	*p   = xdr_zero;
-
+	if (svc_rdma_encode_read_list(sctxt) < 0)
+		goto err0;
 	if (wr_lst) {
 		/* XXX: Presume the client sent only one Write chunk */
-		ret = svc_rdma_send_write_chunk(rdma, wr_lst, xdr);
+		unsigned long offset;
+		unsigned int length;
+
+		if (rctxt->rc_read_payload_length) {
+			offset = rctxt->rc_read_payload_offset;
+			length = rctxt->rc_read_payload_length;
+		} else {
+			offset = xdr->head[0].iov_len;
+			length = xdr->page_len;
+		}
+		ret = svc_rdma_send_write_chunk(rdma, wr_lst, xdr, offset,
+						length);
 		if (ret < 0)
 			goto err2;
-		svc_rdma_xdr_encode_write_list(rdma_resp, wr_lst, ret);
+		if (svc_rdma_encode_write_list(rctxt, sctxt, length) < 0)
+			goto err0;
+	} else {
+		if (xdr_stream_encode_item_absent(&sctxt->sc_stream) < 0)
+			goto err0;
 	}
 	if (rp_ch) {
-		ret = svc_rdma_send_reply_chunk(rdma, rp_ch, wr_lst, xdr);
+		ret = svc_rdma_send_reply_chunk(rdma, rctxt, &rqstp->rq_res);
 		if (ret < 0)
 			goto err2;
-		svc_rdma_xdr_encode_reply_chunk(rdma_resp, rp_ch, ret);
+		if (svc_rdma_encode_reply_chunk(rctxt, sctxt, ret) < 0)
+			goto err0;
+	} else {
+		if (xdr_stream_encode_item_absent(&sctxt->sc_stream) < 0)
+			goto err0;
 	}
 
-	svc_rdma_sync_reply_hdr(rdma, sctxt, svc_rdma_reply_hdr_len(rdma_resp));
-	ret = svc_rdma_send_reply_msg(rdma, sctxt, rctxt, rqstp,
-				      wr_lst, rp_ch);
+	ret = svc_rdma_send_reply_msg(rdma, sctxt, rctxt, rqstp);
 	if (ret < 0)
 		goto err1;
 	ret = 0;
@@ -900,3 +949,30 @@ int svc_rdma_sendto(struct svc_rqst *rqstp)
 	ret = -ENOTCONN;
 	goto out;
 }
+
+/**
+ * svc_rdma_read_payload - special processing for a READ payload
+ * @rqstp: svc_rqst to operate on
+ * @offset: payload's byte offset in @xdr
+ * @length: size of payload, in bytes
+ *
+ * Returns zero on success.
+ *
+ * For the moment, just record the xdr_buf location of the READ
+ * payload. svc_rdma_sendto will use that location later when
+ * we actually send the payload.
+ */
+int svc_rdma_read_payload(struct svc_rqst *rqstp, unsigned int offset,
+			  unsigned int length)
+{
+	struct svc_rdma_recv_ctxt *rctxt = rqstp->rq_xprt_ctxt;
+
+	/* XXX: Just one READ payload slot for now, since our
+	 * transport implementation currently supports only one
+	 * Write chunk.
+	 */
+	rctxt->rc_read_payload_offset = offset;
+	rctxt->rc_read_payload_length = length;
+
+	return 0;
+}
diff --git a/net/sunrpc/xprtrdma/svc_rdma_transport.c b/net/sunrpc/xprtrdma/svc_rdma_transport.c
index 145a361..8bb9998 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_transport.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_transport.c
@@ -82,6 +82,7 @@ static const struct svc_xprt_ops svc_rdma_ops = {
 	.xpo_create = svc_rdma_create,
 	.xpo_recvfrom = svc_rdma_recvfrom,
 	.xpo_sendto = svc_rdma_sendto,
+	.xpo_read_payload = svc_rdma_read_payload,
 	.xpo_release_rqst = svc_rdma_release_rqst,
 	.xpo_detach = svc_rdma_detach,
 	.xpo_free = svc_rdma_free,
@@ -240,10 +241,6 @@ static void handle_connect_req(struct rdma_cm_id *new_cma_id,
 static int rdma_listen_handler(struct rdma_cm_id *cma_id,
 			       struct rdma_cm_event *event)
 {
-	struct sockaddr *sap = (struct sockaddr *)&cma_id->route.addr.src_addr;
-
-	trace_svcrdma_cm_event(event, sap);
-
 	switch (event->event) {
 	case RDMA_CM_EVENT_CONNECT_REQUEST:
 		dprintk("svcrdma: Connect request on cma_id=%p, xprt = %p, "
@@ -265,12 +262,9 @@ static int rdma_listen_handler(struct rdma_cm_id *cma_id,
 static int rdma_cma_handler(struct rdma_cm_id *cma_id,
 			    struct rdma_cm_event *event)
 {
-	struct sockaddr *sap = (struct sockaddr *)&cma_id->route.addr.dst_addr;
 	struct svcxprt_rdma *rdma = cma_id->context;
 	struct svc_xprt *xprt = &rdma->sc_xprt;
 
-	trace_svcrdma_cm_event(event, sap);
-
 	switch (event->event) {
 	case RDMA_CM_EVENT_ESTABLISHED:
 		/* Accept complete */
diff --git a/net/sunrpc/xprtrdma/transport.c b/net/sunrpc/xprtrdma/transport.c
index 3cfeba6..659da37 100644
--- a/net/sunrpc/xprtrdma/transport.c
+++ b/net/sunrpc/xprtrdma/transport.c
@@ -240,9 +240,10 @@ xprt_rdma_connect_worker(struct work_struct *work)
 	struct rpc_xprt *xprt = &r_xprt->rx_xprt;
 	int rc;
 
-	rc = rpcrdma_ep_connect(&r_xprt->rx_ep, &r_xprt->rx_ia);
+	rc = rpcrdma_xprt_connect(r_xprt);
 	xprt_clear_connecting(xprt);
-	if (r_xprt->rx_ep.rep_connected > 0) {
+	if (r_xprt->rx_ep && r_xprt->rx_ep->re_connect_status > 0) {
+		xprt->connect_cookie++;
 		xprt->stat.connect_count++;
 		xprt->stat.connect_time += (long)jiffies -
 					   xprt->stat.connect_start;
@@ -265,7 +266,7 @@ xprt_rdma_inject_disconnect(struct rpc_xprt *xprt)
 	struct rpcrdma_xprt *r_xprt = rpcx_to_rdmax(xprt);
 
 	trace_xprtrdma_op_inject_dsc(r_xprt);
-	rdma_disconnect(r_xprt->rx_ia.ri_id);
+	rdma_disconnect(r_xprt->rx_ep->re_id);
 }
 
 /**
@@ -284,9 +285,8 @@ xprt_rdma_destroy(struct rpc_xprt *xprt)
 
 	cancel_delayed_work_sync(&r_xprt->rx_connect_worker);
 
-	rpcrdma_ep_destroy(r_xprt);
+	rpcrdma_xprt_disconnect(r_xprt);
 	rpcrdma_buffer_destroy(&r_xprt->rx_buf);
-	rpcrdma_ia_close(&r_xprt->rx_ia);
 
 	xprt_rdma_free_addresses(xprt);
 	xprt_free(xprt);
@@ -316,10 +316,15 @@ xprt_setup_rdma(struct xprt_create *args)
 	if (args->addrlen > sizeof(xprt->addr))
 		return ERR_PTR(-EBADF);
 
+	if (!try_module_get(THIS_MODULE))
+		return ERR_PTR(-EIO);
+
 	xprt = xprt_alloc(args->net, sizeof(struct rpcrdma_xprt), 0,
 			  xprt_rdma_slot_table_entries);
-	if (!xprt)
+	if (!xprt) {
+		module_put(THIS_MODULE);
 		return ERR_PTR(-ENOMEM);
+	}
 
 	xprt->timeout = &xprt_rdma_default_timeout;
 	xprt->connect_timeout = xprt->timeout->to_initval;
@@ -347,23 +352,17 @@ xprt_setup_rdma(struct xprt_create *args)
 	xprt_rdma_format_addresses(xprt, sap);
 
 	new_xprt = rpcx_to_rdmax(xprt);
-	rc = rpcrdma_ia_open(new_xprt);
-	if (rc)
-		goto out1;
-
-	rc = rpcrdma_ep_create(new_xprt);
-	if (rc)
-		goto out2;
-
 	rc = rpcrdma_buffer_create(new_xprt);
-	if (rc)
-		goto out3;
-
-	if (!try_module_get(THIS_MODULE))
-		goto out4;
+	if (rc) {
+		xprt_rdma_free_addresses(xprt);
+		xprt_free(xprt);
+		module_put(THIS_MODULE);
+		return ERR_PTR(rc);
+	}
 
 	INIT_DELAYED_WORK(&new_xprt->rx_connect_worker,
 			  xprt_rdma_connect_worker);
+
 	xprt->max_payload = RPCRDMA_MAX_DATA_SEGS << PAGE_SHIFT;
 
 	dprintk("RPC:       %s: %s:%s\n", __func__,
@@ -371,19 +370,6 @@ xprt_setup_rdma(struct xprt_create *args)
 		xprt->address_strings[RPC_DISPLAY_PORT]);
 	trace_xprtrdma_create(new_xprt);
 	return xprt;
-
-out4:
-	rpcrdma_buffer_destroy(&new_xprt->rx_buf);
-	rc = -ENODEV;
-out3:
-	rpcrdma_ep_destroy(new_xprt);
-out2:
-	rpcrdma_ia_close(&new_xprt->rx_ia);
-out1:
-	trace_xprtrdma_op_destroy(new_xprt);
-	xprt_rdma_free_addresses(xprt);
-	xprt_free(xprt);
-	return ERR_PTR(rc);
 }
 
 /**
@@ -398,26 +384,11 @@ xprt_setup_rdma(struct xprt_create *args)
 void xprt_rdma_close(struct rpc_xprt *xprt)
 {
 	struct rpcrdma_xprt *r_xprt = rpcx_to_rdmax(xprt);
-	struct rpcrdma_ep *ep = &r_xprt->rx_ep;
-	struct rpcrdma_ia *ia = &r_xprt->rx_ia;
-
-	might_sleep();
 
 	trace_xprtrdma_op_close(r_xprt);
 
-	/* Prevent marshaling and sending of new requests */
-	xprt_clear_connected(xprt);
+	rpcrdma_xprt_disconnect(r_xprt);
 
-	if (test_and_clear_bit(RPCRDMA_IAF_REMOVING, &ia->ri_flags)) {
-		rpcrdma_ia_remove(ia);
-		goto out;
-	}
-
-	if (ep->rep_connected == -ENODEV)
-		return;
-	rpcrdma_ep_disconnect(ep, ia);
-
-out:
 	xprt->reestablish_timeout = 0;
 	++xprt->connect_cookie;
 	xprt_disconnect_done(xprt);
@@ -517,10 +488,11 @@ static void
 xprt_rdma_connect(struct rpc_xprt *xprt, struct rpc_task *task)
 {
 	struct rpcrdma_xprt *r_xprt = rpcx_to_rdmax(xprt);
+	struct rpcrdma_ep *ep = r_xprt->rx_ep;
 	unsigned long delay;
 
 	delay = 0;
-	if (r_xprt->rx_ep.rep_connected != 0) {
+	if (ep && ep->re_connect_status != 0) {
 		delay = xprt_reconnect_delay(xprt);
 		xprt_reconnect_backoff(xprt, RPCRDMA_INIT_REEST_TO);
 	}
@@ -694,7 +666,7 @@ xprt_rdma_send_request(struct rpc_rqst *rqst)
 		goto drop_connection;
 	rqst->rq_xtime = ktime_get();
 
-	if (rpcrdma_ep_post(&r_xprt->rx_ia, &r_xprt->rx_ep, req))
+	if (rpcrdma_post_sends(r_xprt, req))
 		goto drop_connection;
 
 	rqst->rq_xmit_bytes_sent += rqst->rq_snd_buf.len;
diff --git a/net/sunrpc/xprtrdma/verbs.c b/net/sunrpc/xprtrdma/verbs.c
index 353f61a..cdd84c0 100644
--- a/net/sunrpc/xprtrdma/verbs.c
+++ b/net/sunrpc/xprtrdma/verbs.c
@@ -84,6 +84,7 @@ static void rpcrdma_rep_destroy(struct rpcrdma_rep *rep);
 static void rpcrdma_reps_unmap(struct rpcrdma_xprt *r_xprt);
 static void rpcrdma_mrs_create(struct rpcrdma_xprt *r_xprt);
 static void rpcrdma_mrs_destroy(struct rpcrdma_xprt *r_xprt);
+static int rpcrdma_ep_destroy(struct rpcrdma_ep *ep);
 static struct rpcrdma_regbuf *
 rpcrdma_regbuf_alloc(size_t size, enum dma_data_direction direction,
 		     gfp_t flags);
@@ -96,17 +97,17 @@ static void rpcrdma_regbuf_free(struct rpcrdma_regbuf *rb);
  */
 static void rpcrdma_xprt_drain(struct rpcrdma_xprt *r_xprt)
 {
-	struct rpcrdma_ia *ia = &r_xprt->rx_ia;
+	struct rdma_cm_id *id = r_xprt->rx_ep->re_id;
 
 	/* Flush Receives, then wait for deferred Reply work
 	 * to complete.
 	 */
-	ib_drain_rq(ia->ri_id->qp);
+	ib_drain_rq(id->qp);
 
 	/* Deferred Reply processing might have scheduled
 	 * local invalidations.
 	 */
-	ib_drain_sq(ia->ri_id->qp);
+	ib_drain_sq(id->qp);
 }
 
 /**
@@ -115,26 +116,43 @@ static void rpcrdma_xprt_drain(struct rpcrdma_xprt *r_xprt)
  * @context: ep that owns QP where event occurred
  *
  * Called from the RDMA provider (device driver) possibly in an interrupt
- * context.
+ * context. The QP is always destroyed before the ID, so the ID will be
+ * reliably available when this handler is invoked.
  */
-static void
-rpcrdma_qp_event_handler(struct ib_event *event, void *context)
+static void rpcrdma_qp_event_handler(struct ib_event *event, void *context)
 {
 	struct rpcrdma_ep *ep = context;
-	struct rpcrdma_xprt *r_xprt = container_of(ep, struct rpcrdma_xprt,
-						   rx_ep);
 
-	trace_xprtrdma_qp_event(r_xprt, event);
+	trace_xprtrdma_qp_event(ep, event);
+}
+
+/**
+ * rpcrdma_flush_disconnect - Disconnect on flushed completion
+ * @cq: completion queue
+ * @wc: work completion entry
+ *
+ * Must be called in process context.
+ */
+void rpcrdma_flush_disconnect(struct ib_cq *cq, struct ib_wc *wc)
+{
+	struct rpcrdma_xprt *r_xprt = cq->cq_context;
+	struct rpc_xprt *xprt = &r_xprt->rx_xprt;
+
+	if (wc->status != IB_WC_SUCCESS &&
+	    r_xprt->rx_ep->re_connect_status == 1) {
+		r_xprt->rx_ep->re_connect_status = -ECONNABORTED;
+		trace_xprtrdma_flush_dct(r_xprt, wc->status);
+		xprt_force_disconnect(xprt);
+	}
 }
 
 /**
  * rpcrdma_wc_send - Invoked by RDMA provider for each polled Send WC
  * @cq:	completion queue
- * @wc:	completed WR
+ * @wc:	WCE for a completed Send WR
  *
  */
-static void
-rpcrdma_wc_send(struct ib_cq *cq, struct ib_wc *wc)
+static void rpcrdma_wc_send(struct ib_cq *cq, struct ib_wc *wc)
 {
 	struct ib_cqe *cqe = wc->wr_cqe;
 	struct rpcrdma_sendctx *sc =
@@ -143,25 +161,25 @@ rpcrdma_wc_send(struct ib_cq *cq, struct ib_wc *wc)
 	/* WARNING: Only wr_cqe and status are reliable at this point */
 	trace_xprtrdma_wc_send(sc, wc);
 	rpcrdma_sendctx_put_locked((struct rpcrdma_xprt *)cq->cq_context, sc);
+	rpcrdma_flush_disconnect(cq, wc);
 }
 
 /**
  * rpcrdma_wc_receive - Invoked by RDMA provider for each polled Receive WC
- * @cq:	completion queue (ignored)
- * @wc:	completed WR
+ * @cq:	completion queue
+ * @wc:	WCE for a completed Receive WR
  *
  */
-static void
-rpcrdma_wc_receive(struct ib_cq *cq, struct ib_wc *wc)
+static void rpcrdma_wc_receive(struct ib_cq *cq, struct ib_wc *wc)
 {
 	struct ib_cqe *cqe = wc->wr_cqe;
 	struct rpcrdma_rep *rep = container_of(cqe, struct rpcrdma_rep,
 					       rr_cqe);
-	struct rpcrdma_xprt *r_xprt = rep->rr_rxprt;
+	struct rpcrdma_xprt *r_xprt = cq->cq_context;
 
 	/* WARNING: Only wr_cqe and status are reliable at this point */
 	trace_xprtrdma_wc_receive(wc);
-	--r_xprt->rx_ep.rep_receive_count;
+	--r_xprt->rx_ep->re_receive_count;
 	if (wc->status != IB_WC_SUCCESS)
 		goto out_flushed;
 
@@ -178,35 +196,35 @@ rpcrdma_wc_receive(struct ib_cq *cq, struct ib_wc *wc)
 	return;
 
 out_flushed:
+	rpcrdma_flush_disconnect(cq, wc);
 	rpcrdma_rep_destroy(rep);
 }
 
-static void rpcrdma_update_cm_private(struct rpcrdma_xprt *r_xprt,
+static void rpcrdma_update_cm_private(struct rpcrdma_ep *ep,
 				      struct rdma_conn_param *param)
 {
 	const struct rpcrdma_connect_private *pmsg = param->private_data;
-	struct rpcrdma_ep *ep = &r_xprt->rx_ep;
 	unsigned int rsize, wsize;
 
 	/* Default settings for RPC-over-RDMA Version One */
-	r_xprt->rx_ia.ri_implicit_roundup = xprt_rdma_pad_optimize;
+	ep->re_implicit_roundup = xprt_rdma_pad_optimize;
 	rsize = RPCRDMA_V1_DEF_INLINE_SIZE;
 	wsize = RPCRDMA_V1_DEF_INLINE_SIZE;
 
 	if (pmsg &&
 	    pmsg->cp_magic == rpcrdma_cmp_magic &&
 	    pmsg->cp_version == RPCRDMA_CMP_VERSION) {
-		r_xprt->rx_ia.ri_implicit_roundup = true;
+		ep->re_implicit_roundup = true;
 		rsize = rpcrdma_decode_buffer_size(pmsg->cp_send_size);
 		wsize = rpcrdma_decode_buffer_size(pmsg->cp_recv_size);
 	}
 
-	if (rsize < ep->rep_inline_recv)
-		ep->rep_inline_recv = rsize;
-	if (wsize < ep->rep_inline_send)
-		ep->rep_inline_send = wsize;
+	if (rsize < ep->re_inline_recv)
+		ep->re_inline_recv = rsize;
+	if (wsize < ep->re_inline_send)
+		ep->re_inline_send = wsize;
 
-	rpcrdma_set_max_header_sizes(r_xprt);
+	rpcrdma_set_max_header_sizes(ep);
 }
 
 /**
@@ -220,116 +238,103 @@ static void rpcrdma_update_cm_private(struct rpcrdma_xprt *r_xprt,
 static int
 rpcrdma_cm_event_handler(struct rdma_cm_id *id, struct rdma_cm_event *event)
 {
-	struct rpcrdma_xprt *r_xprt = id->context;
-	struct rpcrdma_ia *ia = &r_xprt->rx_ia;
-	struct rpcrdma_ep *ep = &r_xprt->rx_ep;
-	struct rpc_xprt *xprt = &r_xprt->rx_xprt;
+	struct sockaddr *sap = (struct sockaddr *)&id->route.addr.dst_addr;
+	struct rpcrdma_ep *ep = id->context;
+	struct rpc_xprt *xprt = ep->re_xprt;
 
 	might_sleep();
 
-	trace_xprtrdma_cm_event(r_xprt, event);
 	switch (event->event) {
 	case RDMA_CM_EVENT_ADDR_RESOLVED:
 	case RDMA_CM_EVENT_ROUTE_RESOLVED:
-		ia->ri_async_rc = 0;
-		complete(&ia->ri_done);
+		ep->re_async_rc = 0;
+		complete(&ep->re_done);
 		return 0;
 	case RDMA_CM_EVENT_ADDR_ERROR:
-		ia->ri_async_rc = -EPROTO;
-		complete(&ia->ri_done);
+		ep->re_async_rc = -EPROTO;
+		complete(&ep->re_done);
 		return 0;
 	case RDMA_CM_EVENT_ROUTE_ERROR:
-		ia->ri_async_rc = -ENETUNREACH;
-		complete(&ia->ri_done);
+		ep->re_async_rc = -ENETUNREACH;
+		complete(&ep->re_done);
 		return 0;
 	case RDMA_CM_EVENT_DEVICE_REMOVAL:
-#if IS_ENABLED(CONFIG_SUNRPC_DEBUG)
-		pr_info("rpcrdma: removing device %s for %s:%s\n",
-			ia->ri_id->device->name,
-			rpcrdma_addrstr(r_xprt), rpcrdma_portstr(r_xprt));
-#endif
-		init_completion(&ia->ri_remove_done);
-		set_bit(RPCRDMA_IAF_REMOVING, &ia->ri_flags);
-		ep->rep_connected = -ENODEV;
+		pr_info("rpcrdma: removing device %s for %pISpc\n",
+			ep->re_id->device->name, sap);
+		/* fall through */
+	case RDMA_CM_EVENT_ADDR_CHANGE:
+		ep->re_connect_status = -ENODEV;
 		xprt_force_disconnect(xprt);
-		wait_for_completion(&ia->ri_remove_done);
-
-		ia->ri_id = NULL;
-		/* Return 1 to ensure the core destroys the id. */
-		return 1;
+		goto disconnected;
 	case RDMA_CM_EVENT_ESTABLISHED:
-		++xprt->connect_cookie;
-		ep->rep_connected = 1;
-		rpcrdma_update_cm_private(r_xprt, &event->param.conn);
-		trace_xprtrdma_inline_thresh(r_xprt);
-		wake_up_all(&ep->rep_connect_wait);
+		kref_get(&ep->re_kref);
+		ep->re_connect_status = 1;
+		rpcrdma_update_cm_private(ep, &event->param.conn);
+		trace_xprtrdma_inline_thresh(ep);
+		wake_up_all(&ep->re_connect_wait);
 		break;
 	case RDMA_CM_EVENT_CONNECT_ERROR:
-		ep->rep_connected = -ENOTCONN;
+		ep->re_connect_status = -ENOTCONN;
 		goto disconnected;
 	case RDMA_CM_EVENT_UNREACHABLE:
-		ep->rep_connected = -ENETUNREACH;
+		ep->re_connect_status = -ENETUNREACH;
 		goto disconnected;
 	case RDMA_CM_EVENT_REJECTED:
-		dprintk("rpcrdma: connection to %s:%s rejected: %s\n",
-			rpcrdma_addrstr(r_xprt), rpcrdma_portstr(r_xprt),
-			rdma_reject_msg(id, event->status));
-		ep->rep_connected = -ECONNREFUSED;
+		dprintk("rpcrdma: connection to %pISpc rejected: %s\n",
+			sap, rdma_reject_msg(id, event->status));
+		ep->re_connect_status = -ECONNREFUSED;
 		if (event->status == IB_CM_REJ_STALE_CONN)
-			ep->rep_connected = -EAGAIN;
+			ep->re_connect_status = -EAGAIN;
 		goto disconnected;
 	case RDMA_CM_EVENT_DISCONNECTED:
-		ep->rep_connected = -ECONNABORTED;
+		ep->re_connect_status = -ECONNABORTED;
 disconnected:
-		xprt_force_disconnect(xprt);
-		wake_up_all(&ep->rep_connect_wait);
-		break;
+		return rpcrdma_ep_destroy(ep);
 	default:
 		break;
 	}
 
-	dprintk("RPC:       %s: %s:%s on %s/frwr: %s\n", __func__,
-		rpcrdma_addrstr(r_xprt), rpcrdma_portstr(r_xprt),
-		ia->ri_id->device->name, rdma_event_msg(event->event));
+	dprintk("RPC:       %s: %pISpc on %s/frwr: %s\n", __func__, sap,
+		ep->re_id->device->name, rdma_event_msg(event->event));
 	return 0;
 }
 
-static struct rdma_cm_id *
-rpcrdma_create_id(struct rpcrdma_xprt *xprt, struct rpcrdma_ia *ia)
+static struct rdma_cm_id *rpcrdma_create_id(struct rpcrdma_xprt *r_xprt,
+					    struct rpcrdma_ep *ep)
 {
 	unsigned long wtimeout = msecs_to_jiffies(RDMA_RESOLVE_TIMEOUT) + 1;
+	struct rpc_xprt *xprt = &r_xprt->rx_xprt;
 	struct rdma_cm_id *id;
 	int rc;
 
-	init_completion(&ia->ri_done);
+	init_completion(&ep->re_done);
 
-	id = rdma_create_id(xprt->rx_xprt.xprt_net, rpcrdma_cm_event_handler,
-			    xprt, RDMA_PS_TCP, IB_QPT_RC);
+	id = rdma_create_id(xprt->xprt_net, rpcrdma_cm_event_handler, ep,
+			    RDMA_PS_TCP, IB_QPT_RC);
 	if (IS_ERR(id))
 		return id;
 
-	ia->ri_async_rc = -ETIMEDOUT;
-	rc = rdma_resolve_addr(id, NULL,
-			       (struct sockaddr *)&xprt->rx_xprt.addr,
+	ep->re_async_rc = -ETIMEDOUT;
+	rc = rdma_resolve_addr(id, NULL, (struct sockaddr *)&xprt->addr,
 			       RDMA_RESOLVE_TIMEOUT);
 	if (rc)
 		goto out;
-	rc = wait_for_completion_interruptible_timeout(&ia->ri_done, wtimeout);
+	rc = wait_for_completion_interruptible_timeout(&ep->re_done, wtimeout);
 	if (rc < 0)
 		goto out;
 
-	rc = ia->ri_async_rc;
+	rc = ep->re_async_rc;
 	if (rc)
 		goto out;
 
-	ia->ri_async_rc = -ETIMEDOUT;
+	ep->re_async_rc = -ETIMEDOUT;
 	rc = rdma_resolve_route(id, RDMA_RESOLVE_TIMEOUT);
 	if (rc)
 		goto out;
-	rc = wait_for_completion_interruptible_timeout(&ia->ri_done, wtimeout);
+	rc = wait_for_completion_interruptible_timeout(&ep->re_done, wtimeout);
 	if (rc < 0)
 		goto out;
-	rc = ia->ri_async_rc;
+	rc = ep->re_async_rc;
 	if (rc)
 		goto out;
 
@@ -340,356 +345,181 @@ rpcrdma_create_id(struct rpcrdma_xprt *xprt, struct rpcrdma_ia *ia)
 	return ERR_PTR(rc);
 }
 
-/*
- * Exported functions.
- */
-
-/**
- * rpcrdma_ia_open - Open and initialize an Interface Adapter.
- * @xprt: transport with IA to (re)initialize
- *
- * Returns 0 on success, negative errno if an appropriate
- * Interface Adapter could not be found and opened.
- */
-int
-rpcrdma_ia_open(struct rpcrdma_xprt *xprt)
+static void rpcrdma_ep_put(struct kref *kref)
 {
-	struct rpcrdma_ia *ia = &xprt->rx_ia;
+	struct rpcrdma_ep *ep = container_of(kref, struct rpcrdma_ep, re_kref);
+
+	if (ep->re_id->qp) {
+		rdma_destroy_qp(ep->re_id);
+		ep->re_id->qp = NULL;
+	}
+
+	if (ep->re_attr.recv_cq)
+		ib_free_cq(ep->re_attr.recv_cq);
+	ep->re_attr.recv_cq = NULL;
+	if (ep->re_attr.send_cq)
+		ib_free_cq(ep->re_attr.send_cq);
+	ep->re_attr.send_cq = NULL;
+
+	if (ep->re_pd)
+		ib_dealloc_pd(ep->re_pd);
+	ep->re_pd = NULL;
+
+	kfree(ep);
+	module_put(THIS_MODULE);
+}
+
+/* Returns:
+ *     %0 if @ep still has a positive kref count, or
+ *     %1 if @ep was destroyed successfully.
+ */
+static int rpcrdma_ep_destroy(struct rpcrdma_ep *ep)
+{
+	return kref_put(&ep->re_kref, rpcrdma_ep_put);
+}
+
+static int rpcrdma_ep_create(struct rpcrdma_xprt *r_xprt)
+{
+	struct rpcrdma_connect_private *pmsg;
+	struct ib_device *device;
+	struct rdma_cm_id *id;
+	struct rpcrdma_ep *ep;
 	int rc;
 
-	ia->ri_id = rpcrdma_create_id(xprt, ia);
-	if (IS_ERR(ia->ri_id)) {
-		rc = PTR_ERR(ia->ri_id);
-		goto out_err;
+	ep = kzalloc(sizeof(*ep), GFP_NOFS);
+	if (!ep)
+		return -EAGAIN;
+	ep->re_xprt = &r_xprt->rx_xprt;
+	kref_init(&ep->re_kref);
+
+	id = rpcrdma_create_id(r_xprt, ep);
+	if (IS_ERR(id)) {
+		rc = PTR_ERR(id);
+		goto out_free;
 	}
+	__module_get(THIS_MODULE);
+	device = id->device;
+	ep->re_id = id;
 
-	ia->ri_pd = ib_alloc_pd(ia->ri_id->device, 0);
-	if (IS_ERR(ia->ri_pd)) {
-		rc = PTR_ERR(ia->ri_pd);
-		pr_err("rpcrdma: ib_alloc_pd() returned %d\n", rc);
-		goto out_err;
-	}
-
-	return 0;
-
-out_err:
-	rpcrdma_ia_close(ia);
-	return rc;
-}
-
-/**
- * rpcrdma_ia_remove - Handle device driver unload
- * @ia: interface adapter being removed
- *
- * Divest transport H/W resources associated with this adapter,
- * but allow it to be restored later.
- *
- * Caller must hold the transport send lock.
- */
-void
-rpcrdma_ia_remove(struct rpcrdma_ia *ia)
-{
-	struct rpcrdma_xprt *r_xprt = container_of(ia, struct rpcrdma_xprt,
-						   rx_ia);
-	struct rpcrdma_ep *ep = &r_xprt->rx_ep;
-
-	/* This is similar to rpcrdma_ep_destroy, but:
-	 * - Don't cancel the connect worker.
-	 * - Don't call rpcrdma_ep_disconnect, which waits
-	 *   for another conn upcall, which will deadlock.
-	 * - rdma_disconnect is unneeded, the underlying
-	 *   connection is already gone.
-	 */
-	if (ia->ri_id->qp) {
-		rpcrdma_xprt_drain(r_xprt);
-		rdma_destroy_qp(ia->ri_id);
-		ia->ri_id->qp = NULL;
-	}
-	ib_free_cq(ep->rep_attr.recv_cq);
-	ep->rep_attr.recv_cq = NULL;
-	ib_free_cq(ep->rep_attr.send_cq);
-	ep->rep_attr.send_cq = NULL;
-
-	/* The ULP is responsible for ensuring all DMA
-	 * mappings and MRs are gone.
-	 */
-	rpcrdma_reps_unmap(r_xprt);
-	rpcrdma_reqs_reset(r_xprt);
-	rpcrdma_mrs_destroy(r_xprt);
-	rpcrdma_sendctxs_destroy(r_xprt);
-	ib_dealloc_pd(ia->ri_pd);
-	ia->ri_pd = NULL;
-
-	/* Allow waiters to continue */
-	complete(&ia->ri_remove_done);
-
-	trace_xprtrdma_remove(r_xprt);
-}
-
-/**
- * rpcrdma_ia_close - Clean up/close an IA.
- * @ia: interface adapter to close
- *
- */
-void
-rpcrdma_ia_close(struct rpcrdma_ia *ia)
-{
-	if (ia->ri_id != NULL && !IS_ERR(ia->ri_id)) {
-		if (ia->ri_id->qp)
-			rdma_destroy_qp(ia->ri_id);
-		rdma_destroy_id(ia->ri_id);
-	}
-	ia->ri_id = NULL;
-
-	/* If the pd is still busy, xprtrdma missed freeing a resource */
-	if (ia->ri_pd && !IS_ERR(ia->ri_pd))
-		ib_dealloc_pd(ia->ri_pd);
-	ia->ri_pd = NULL;
-}
-
-/**
- * rpcrdma_ep_create - Create unconnected endpoint
- * @r_xprt: transport to instantiate
- *
- * Returns zero on success, or a negative errno.
- */
-int rpcrdma_ep_create(struct rpcrdma_xprt *r_xprt)
-{
-	struct rpcrdma_ep *ep = &r_xprt->rx_ep;
-	struct rpcrdma_ia *ia = &r_xprt->rx_ia;
-	struct rpcrdma_connect_private *pmsg = &ep->rep_cm_private;
-	struct ib_cq *sendcq, *recvcq;
-	int rc;
-
-	ep->rep_max_requests = r_xprt->rx_xprt.max_reqs;
-	ep->rep_inline_send = xprt_rdma_max_inline_write;
-	ep->rep_inline_recv = xprt_rdma_max_inline_read;
-
-	rc = frwr_query_device(r_xprt, ia->ri_id->device);
+	ep->re_max_requests = r_xprt->rx_xprt.max_reqs;
+	ep->re_inline_send = xprt_rdma_max_inline_write;
+	ep->re_inline_recv = xprt_rdma_max_inline_read;
+	rc = frwr_query_device(ep, device);
 	if (rc)
-		return rc;
-	r_xprt->rx_buf.rb_max_requests = cpu_to_be32(ep->rep_max_requests);
+		goto out_destroy;
 
-	ep->rep_attr.event_handler = rpcrdma_qp_event_handler;
-	ep->rep_attr.qp_context = ep;
-	ep->rep_attr.srq = NULL;
-	ep->rep_attr.cap.max_inline_data = 0;
-	ep->rep_attr.sq_sig_type = IB_SIGNAL_REQ_WR;
-	ep->rep_attr.qp_type = IB_QPT_RC;
-	ep->rep_attr.port_num = ~0;
+	r_xprt->rx_buf.rb_max_requests = cpu_to_be32(ep->re_max_requests);
+
+	ep->re_attr.event_handler = rpcrdma_qp_event_handler;
+	ep->re_attr.qp_context = ep;
+	ep->re_attr.srq = NULL;
+	ep->re_attr.cap.max_inline_data = 0;
+	ep->re_attr.sq_sig_type = IB_SIGNAL_REQ_WR;
+	ep->re_attr.qp_type = IB_QPT_RC;
+	ep->re_attr.port_num = ~0;
 
 	dprintk("RPC:       %s: requested max: dtos: send %d recv %d; "
 		"iovs: send %d recv %d\n",
 		__func__,
-		ep->rep_attr.cap.max_send_wr,
-		ep->rep_attr.cap.max_recv_wr,
-		ep->rep_attr.cap.max_send_sge,
-		ep->rep_attr.cap.max_recv_sge);
+		ep->re_attr.cap.max_send_wr,
+		ep->re_attr.cap.max_recv_wr,
+		ep->re_attr.cap.max_send_sge,
+		ep->re_attr.cap.max_recv_sge);
 
-	ep->rep_send_batch = ep->rep_max_requests >> 3;
-	ep->rep_send_count = ep->rep_send_batch;
-	init_waitqueue_head(&ep->rep_connect_wait);
-	ep->rep_receive_count = 0;
+	ep->re_send_batch = ep->re_max_requests >> 3;
+	ep->re_send_count = ep->re_send_batch;
+	init_waitqueue_head(&ep->re_connect_wait);
 
-	sendcq = ib_alloc_cq_any(ia->ri_id->device, r_xprt,
-				 ep->rep_attr.cap.max_send_wr + 1,
-				 IB_POLL_WORKQUEUE);
-	if (IS_ERR(sendcq)) {
-		rc = PTR_ERR(sendcq);
-		goto out1;
+	ep->re_attr.send_cq = ib_alloc_cq_any(device, r_xprt,
+					      ep->re_attr.cap.max_send_wr,
+					      IB_POLL_WORKQUEUE);
+	if (IS_ERR(ep->re_attr.send_cq)) {
+		rc = PTR_ERR(ep->re_attr.send_cq);
+		goto out_destroy;
 	}
 
-	recvcq = ib_alloc_cq_any(ia->ri_id->device, NULL,
-				 ep->rep_attr.cap.max_recv_wr + 1,
-				 IB_POLL_WORKQUEUE);
-	if (IS_ERR(recvcq)) {
-		rc = PTR_ERR(recvcq);
-		goto out2;
+	ep->re_attr.recv_cq = ib_alloc_cq_any(device, r_xprt,
+					      ep->re_attr.cap.max_recv_wr,
+					      IB_POLL_WORKQUEUE);
+	if (IS_ERR(ep->re_attr.recv_cq)) {
+		rc = PTR_ERR(ep->re_attr.recv_cq);
+		goto out_destroy;
 	}
-
-	ep->rep_attr.send_cq = sendcq;
-	ep->rep_attr.recv_cq = recvcq;
+	ep->re_receive_count = 0;
 
 	/* Initialize cma parameters */
-	memset(&ep->rep_remote_cma, 0, sizeof(ep->rep_remote_cma));
+	memset(&ep->re_remote_cma, 0, sizeof(ep->re_remote_cma));
 
 	/* Prepare RDMA-CM private message */
+	pmsg = &ep->re_cm_private;
 	pmsg->cp_magic = rpcrdma_cmp_magic;
 	pmsg->cp_version = RPCRDMA_CMP_VERSION;
 	pmsg->cp_flags |= RPCRDMA_CMP_F_SND_W_INV_OK;
-	pmsg->cp_send_size = rpcrdma_encode_buffer_size(ep->rep_inline_send);
-	pmsg->cp_recv_size = rpcrdma_encode_buffer_size(ep->rep_inline_recv);
-	ep->rep_remote_cma.private_data = pmsg;
-	ep->rep_remote_cma.private_data_len = sizeof(*pmsg);
+	pmsg->cp_send_size = rpcrdma_encode_buffer_size(ep->re_inline_send);
+	pmsg->cp_recv_size = rpcrdma_encode_buffer_size(ep->re_inline_recv);
+	ep->re_remote_cma.private_data = pmsg;
+	ep->re_remote_cma.private_data_len = sizeof(*pmsg);
 
 	/* Client offers RDMA Read but does not initiate */
-	ep->rep_remote_cma.initiator_depth = 0;
-	ep->rep_remote_cma.responder_resources =
-		min_t(int, U8_MAX, ia->ri_id->device->attrs.max_qp_rd_atom);
+	ep->re_remote_cma.initiator_depth = 0;
+	ep->re_remote_cma.responder_resources =
+		min_t(int, U8_MAX, device->attrs.max_qp_rd_atom);
 
 	/* Limit transport retries so client can detect server
 	 * GID changes quickly. RPC layer handles re-establishing
 	 * transport connection and retransmission.
 	 */
-	ep->rep_remote_cma.retry_count = 6;
+	ep->re_remote_cma.retry_count = 6;
 
 	/* RPC-over-RDMA handles its own flow control. In addition,
 	 * make all RNR NAKs visible so we know that RPC-over-RDMA
 	 * flow control is working correctly (no NAKs should be seen).
 	 */
-	ep->rep_remote_cma.flow_control = 0;
-	ep->rep_remote_cma.rnr_retry_count = 0;
+	ep->re_remote_cma.flow_control = 0;
+	ep->re_remote_cma.rnr_retry_count = 0;
 
+	ep->re_pd = ib_alloc_pd(device, 0);
+	if (IS_ERR(ep->re_pd)) {
+		rc = PTR_ERR(ep->re_pd);
+		goto out_destroy;
+	}
+
+	rc = rdma_create_qp(id, ep->re_pd, &ep->re_attr);
+	if (rc)
+		goto out_destroy;
+
+	r_xprt->rx_ep = ep;
 	return 0;
 
-out2:
-	ib_free_cq(sendcq);
-out1:
+out_destroy:
+	rpcrdma_ep_destroy(ep);
+	rdma_destroy_id(id);
+out_free:
+	kfree(ep);
+	r_xprt->rx_ep = NULL;
 	return rc;
 }
 
 /**
- * rpcrdma_ep_destroy - Disconnect and destroy endpoint.
- * @r_xprt: transport instance to shut down
+ * rpcrdma_xprt_connect - Connect an unconnected transport
+ * @r_xprt: controlling transport instance
  *
+ * Returns 0 on success or a negative errno.
  */
-void rpcrdma_ep_destroy(struct rpcrdma_xprt *r_xprt)
+int rpcrdma_xprt_connect(struct rpcrdma_xprt *r_xprt)
 {
-	struct rpcrdma_ep *ep = &r_xprt->rx_ep;
-	struct rpcrdma_ia *ia = &r_xprt->rx_ia;
-
-	if (ia->ri_id && ia->ri_id->qp) {
-		rpcrdma_ep_disconnect(ep, ia);
-		rdma_destroy_qp(ia->ri_id);
-		ia->ri_id->qp = NULL;
-	}
-
-	if (ep->rep_attr.recv_cq)
-		ib_free_cq(ep->rep_attr.recv_cq);
-	if (ep->rep_attr.send_cq)
-		ib_free_cq(ep->rep_attr.send_cq);
-}
-
-/* Re-establish a connection after a device removal event.
- * Unlike a normal reconnection, a fresh PD and a new set
- * of MRs and buffers is needed.
- */
-static int rpcrdma_ep_recreate_xprt(struct rpcrdma_xprt *r_xprt,
-				    struct ib_qp_init_attr *qp_init_attr)
-{
-	struct rpcrdma_ia *ia = &r_xprt->rx_ia;
-	struct rpcrdma_ep *ep = &r_xprt->rx_ep;
-	int rc, err;
-
-	trace_xprtrdma_reinsert(r_xprt);
-
-	rc = -EHOSTUNREACH;
-	if (rpcrdma_ia_open(r_xprt))
-		goto out1;
-
-	rc = -ENOMEM;
-	err = rpcrdma_ep_create(r_xprt);
-	if (err) {
-		pr_err("rpcrdma: rpcrdma_ep_create returned %d\n", err);
-		goto out2;
-	}
-	memcpy(qp_init_attr, &ep->rep_attr, sizeof(*qp_init_attr));
-
-	rc = -ENETUNREACH;
-	err = rdma_create_qp(ia->ri_id, ia->ri_pd, qp_init_attr);
-	if (err) {
-		pr_err("rpcrdma: rdma_create_qp returned %d\n", err);
-		goto out3;
-	}
-	return 0;
-
-out3:
-	rpcrdma_ep_destroy(r_xprt);
-out2:
-	rpcrdma_ia_close(ia);
-out1:
-	return rc;
-}
-
-static int rpcrdma_ep_reconnect(struct rpcrdma_xprt *r_xprt,
-				struct ib_qp_init_attr *qp_init_attr)
-{
-	struct rpcrdma_ia *ia = &r_xprt->rx_ia;
-	struct rdma_cm_id *id, *old;
-	int err, rc;
-
-	rpcrdma_ep_disconnect(&r_xprt->rx_ep, ia);
-
-	rc = -EHOSTUNREACH;
-	id = rpcrdma_create_id(r_xprt, ia);
-	if (IS_ERR(id))
-		goto out;
-
-	/* As long as the new ID points to the same device as the
-	 * old ID, we can reuse the transport's existing PD and all
-	 * previously allocated MRs. Also, the same device means
-	 * the transport's previous DMA mappings are still valid.
-	 *
-	 * This is a sanity check only. There should be no way these
-	 * point to two different devices here.
-	 */
-	old = id;
-	rc = -ENETUNREACH;
-	if (ia->ri_id->device != id->device) {
-		pr_err("rpcrdma: can't reconnect on different device!\n");
-		goto out_destroy;
-	}
-
-	err = rdma_create_qp(id, ia->ri_pd, qp_init_attr);
-	if (err)
-		goto out_destroy;
-
-	/* Atomically replace the transport's ID and QP. */
-	rc = 0;
-	old = ia->ri_id;
-	ia->ri_id = id;
-	rdma_destroy_qp(old);
-
-out_destroy:
-	rdma_destroy_id(old);
-out:
-	return rc;
-}
-
-/*
- * Connect unconnected endpoint.
- */
-int
-rpcrdma_ep_connect(struct rpcrdma_ep *ep, struct rpcrdma_ia *ia)
-{
-	struct rpcrdma_xprt *r_xprt = container_of(ia, struct rpcrdma_xprt,
-						   rx_ia);
 	struct rpc_xprt *xprt = &r_xprt->rx_xprt;
-	struct ib_qp_init_attr qp_init_attr;
+	struct rpcrdma_ep *ep;
 	int rc;
 
 retry:
-	memcpy(&qp_init_attr, &ep->rep_attr, sizeof(qp_init_attr));
-	switch (ep->rep_connected) {
-	case 0:
-		rc = rdma_create_qp(ia->ri_id, ia->ri_pd, &qp_init_attr);
-		if (rc) {
-			rc = -ENETUNREACH;
-			goto out_noupdate;
-		}
-		break;
-	case -ENODEV:
-		rc = rpcrdma_ep_recreate_xprt(r_xprt, &qp_init_attr);
-		if (rc)
-			goto out_noupdate;
-		break;
-	default:
-		rc = rpcrdma_ep_reconnect(r_xprt, &qp_init_attr);
-		if (rc)
-			goto out;
-	}
+	rpcrdma_xprt_disconnect(r_xprt);
+	rc = rpcrdma_ep_create(r_xprt);
+	if (rc)
+		return rc;
+	ep = r_xprt->rx_ep;
 
-	ep->rep_connected = 0;
+	ep->re_connect_status = 0;
 	xprt_clear_connected(xprt);
 
 	rpcrdma_reset_cwnd(r_xprt);
@@ -699,64 +529,68 @@ rpcrdma_ep_connect(struct rpcrdma_ep *ep, struct rpcrdma_ia *ia)
 	if (rc)
 		goto out;
 
-	rc = rdma_connect(ia->ri_id, &ep->rep_remote_cma);
+	rc = rdma_connect(ep->re_id, &ep->re_remote_cma);
 	if (rc)
 		goto out;
 
 	if (xprt->reestablish_timeout < RPCRDMA_INIT_REEST_TO)
 		xprt->reestablish_timeout = RPCRDMA_INIT_REEST_TO;
-	wait_event_interruptible(ep->rep_connect_wait, ep->rep_connected != 0);
-	if (ep->rep_connected <= 0) {
-		if (ep->rep_connected == -EAGAIN)
+	wait_event_interruptible(ep->re_connect_wait,
+				 ep->re_connect_status != 0);
+	if (ep->re_connect_status <= 0) {
+		if (ep->re_connect_status == -EAGAIN)
 			goto retry;
-		rc = ep->rep_connected;
+		rc = ep->re_connect_status;
 		goto out;
 	}
 
 	rc = rpcrdma_reqs_setup(r_xprt);
 	if (rc) {
-		rpcrdma_ep_disconnect(ep, ia);
+		rpcrdma_xprt_disconnect(r_xprt);
 		goto out;
 	}
 	rpcrdma_mrs_create(r_xprt);
 
 out:
 	if (rc)
-		ep->rep_connected = rc;
-
-out_noupdate:
+		ep->re_connect_status = rc;
 	trace_xprtrdma_connect(r_xprt, rc);
 	return rc;
 }
 
 /**
- * rpcrdma_ep_disconnect - Disconnect underlying transport
- * @ep: endpoint to disconnect
- * @ia: associated interface adapter
+ * rpcrdma_xprt_disconnect - Disconnect underlying transport
+ * @r_xprt: controlling transport instance
  *
  * Caller serializes. Either the transport send lock is held,
  * or we're being called to destroy the transport.
+ *
+ * On return, @r_xprt is completely divested of all hardware
+ * resources and prepared for the next ->connect operation.
  */
-void
-rpcrdma_ep_disconnect(struct rpcrdma_ep *ep, struct rpcrdma_ia *ia)
+void rpcrdma_xprt_disconnect(struct rpcrdma_xprt *r_xprt)
 {
-	struct rpcrdma_xprt *r_xprt = container_of(ep, struct rpcrdma_xprt,
-						   rx_ep);
+	struct rpcrdma_ep *ep = r_xprt->rx_ep;
+	struct rdma_cm_id *id;
 	int rc;
 
-	/* returns without wait if ID is not connected */
-	rc = rdma_disconnect(ia->ri_id);
-	if (!rc)
-		wait_event_interruptible(ep->rep_connect_wait,
-							ep->rep_connected != 1);
-	else
-		ep->rep_connected = rc;
+	if (!ep)
+		return;
+
+	id = ep->re_id;
+	rc = rdma_disconnect(id);
 	trace_xprtrdma_disconnect(r_xprt, rc);
 
 	rpcrdma_xprt_drain(r_xprt);
+	rpcrdma_reps_unmap(r_xprt);
 	rpcrdma_reqs_reset(r_xprt);
 	rpcrdma_mrs_destroy(r_xprt);
 	rpcrdma_sendctxs_destroy(r_xprt);
+
+	if (rpcrdma_ep_destroy(ep))
+		rdma_destroy_id(id);
+
+	r_xprt->rx_ep = NULL;
 }
 
 /* Fixed-size circular FIFO queue. This implementation is wait-free and
@@ -793,7 +627,7 @@ static struct rpcrdma_sendctx *rpcrdma_sendctx_create(struct rpcrdma_ep *ep)
 {
 	struct rpcrdma_sendctx *sc;
 
-	sc = kzalloc(struct_size(sc, sc_sges, ep->rep_attr.cap.max_send_sge),
+	sc = kzalloc(struct_size(sc, sc_sges, ep->re_attr.cap.max_send_sge),
 		     GFP_KERNEL);
 	if (!sc)
 		return NULL;
@@ -813,14 +647,14 @@ static int rpcrdma_sendctxs_create(struct rpcrdma_xprt *r_xprt)
 	 * the ->send_request call to fail temporarily before too many
 	 * Sends are posted.
 	 */
-	i = r_xprt->rx_ep.rep_max_requests + RPCRDMA_MAX_BC_REQUESTS;
+	i = r_xprt->rx_ep->re_max_requests + RPCRDMA_MAX_BC_REQUESTS;
 	buf->rb_sc_ctxs = kcalloc(i, sizeof(sc), GFP_KERNEL);
 	if (!buf->rb_sc_ctxs)
 		return -ENOMEM;
 
 	buf->rb_sc_last = i - 1;
 	for (i = 0; i <= buf->rb_sc_last; i++) {
-		sc = rpcrdma_sendctx_create(&r_xprt->rx_ep);
+		sc = rpcrdma_sendctx_create(r_xprt->rx_ep);
 		if (!sc)
 			return -ENOMEM;
 
@@ -924,10 +758,10 @@ static void
 rpcrdma_mrs_create(struct rpcrdma_xprt *r_xprt)
 {
 	struct rpcrdma_buffer *buf = &r_xprt->rx_buf;
-	struct rpcrdma_ia *ia = &r_xprt->rx_ia;
+	struct rpcrdma_ep *ep = r_xprt->rx_ep;
 	unsigned int count;
 
-	for (count = 0; count < ia->ri_max_rdma_segs; count++) {
+	for (count = 0; count < ep->re_max_rdma_segs; count++) {
 		struct rpcrdma_mr *mr;
 		int rc;
 
@@ -935,14 +769,12 @@ rpcrdma_mrs_create(struct rpcrdma_xprt *r_xprt)
 		if (!mr)
 			break;
 
-		rc = frwr_init_mr(ia, mr);
+		rc = frwr_mr_init(r_xprt, mr);
 		if (rc) {
 			kfree(mr);
 			break;
 		}
 
-		mr->mr_xprt = r_xprt;
-
 		spin_lock(&buf->rb_lock);
 		rpcrdma_mr_push(mr, &buf->rb_mrs);
 		list_add(&mr->mr_all, &buf->rb_all_mrs);
@@ -973,12 +805,12 @@ rpcrdma_mr_refresh_worker(struct work_struct *work)
 void rpcrdma_mrs_refresh(struct rpcrdma_xprt *r_xprt)
 {
 	struct rpcrdma_buffer *buf = &r_xprt->rx_buf;
-	struct rpcrdma_ep *ep = &r_xprt->rx_ep;
+	struct rpcrdma_ep *ep = r_xprt->rx_ep;
 
-	/* If there is no underlying device, it's no use to
-	 * wake the refresh worker.
+	/* If there is no underlying connection, it's no use
+	 * to wake the refresh worker.
 	 */
-	if (ep->rep_connected != -ENODEV) {
+	if (ep->re_connect_status == 1) {
 		/* The work is scheduled on a WQ_MEM_RECLAIM
 		 * workqueue in order to prevent MR allocation
 		 * from recursing into NFS during direct reclaim.
@@ -1042,7 +874,7 @@ int rpcrdma_req_setup(struct rpcrdma_xprt *r_xprt, struct rpcrdma_req *req)
 
 	/* Compute maximum header buffer size in bytes */
 	maxhdrsize = rpcrdma_fixed_maxsz + 3 +
-		     r_xprt->rx_ia.ri_max_rdma_segs * rpcrdma_readchunk_maxsz;
+		     r_xprt->rx_ep->re_max_rdma_segs * rpcrdma_readchunk_maxsz;
 	maxhdrsize *= sizeof(__be32);
 	rb = rpcrdma_regbuf_alloc(__roundup_pow_of_two(maxhdrsize),
 				  DMA_TO_DEVICE, GFP_KERNEL);
@@ -1120,7 +952,7 @@ struct rpcrdma_rep *rpcrdma_rep_create(struct rpcrdma_xprt *r_xprt,
 	if (rep == NULL)
 		goto out;
 
-	rep->rr_rdmabuf = rpcrdma_regbuf_alloc(r_xprt->rx_ep.rep_inline_recv,
+	rep->rr_rdmabuf = rpcrdma_regbuf_alloc(r_xprt->rx_ep->re_inline_recv,
 					       DMA_FROM_DEVICE, GFP_KERNEL);
 	if (!rep->rr_rdmabuf)
 		goto out_free;
@@ -1345,7 +1177,7 @@ void rpcrdma_mr_put(struct rpcrdma_mr *mr)
 
 	if (mr->mr_dir != DMA_NONE) {
 		trace_xprtrdma_mr_unmap(mr);
-		ib_dma_unmap_sg(r_xprt->rx_ia.ri_id->device,
+		ib_dma_unmap_sg(r_xprt->rx_ep->re_id->device,
 				mr->mr_sg, mr->mr_nents, mr->mr_dir);
 		mr->mr_dir = DMA_NONE;
 	}
@@ -1463,7 +1295,7 @@ bool rpcrdma_regbuf_realloc(struct rpcrdma_regbuf *rb, size_t size, gfp_t flags)
 bool __rpcrdma_regbuf_dma_map(struct rpcrdma_xprt *r_xprt,
 			      struct rpcrdma_regbuf *rb)
 {
-	struct ib_device *device = r_xprt->rx_ia.ri_id->device;
+	struct ib_device *device = r_xprt->rx_ep->re_id->device;
 
 	if (rb->rg_direction == DMA_NONE)
 		return false;
@@ -1476,7 +1308,7 @@ bool __rpcrdma_regbuf_dma_map(struct rpcrdma_xprt *r_xprt,
 	}
 
 	rb->rg_device = device;
-	rb->rg_iov.lkey = r_xprt->rx_ia.ri_pd->local_dma_lkey;
+	rb->rg_iov.lkey = r_xprt->rx_ep->re_pd->local_dma_lkey;
 	return true;
 }
 
@@ -1502,31 +1334,28 @@ static void rpcrdma_regbuf_free(struct rpcrdma_regbuf *rb)
 }
 
 /**
- * rpcrdma_ep_post - Post WRs to a transport's Send Queue
- * @ia: transport's device information
- * @ep: transport's RDMA endpoint information
+ * rpcrdma_post_sends - Post WRs to a transport's Send Queue
+ * @r_xprt: controlling transport instance
  * @req: rpcrdma_req containing the Send WR to post
  *
  * Returns 0 if the post was successful, otherwise -ENOTCONN
  * is returned.
  */
-int
-rpcrdma_ep_post(struct rpcrdma_ia *ia,
-		struct rpcrdma_ep *ep,
-		struct rpcrdma_req *req)
+int rpcrdma_post_sends(struct rpcrdma_xprt *r_xprt, struct rpcrdma_req *req)
 {
 	struct ib_send_wr *send_wr = &req->rl_wr;
+	struct rpcrdma_ep *ep = r_xprt->rx_ep;
 	int rc;
 
-	if (!ep->rep_send_count || kref_read(&req->rl_kref) > 1) {
+	if (!ep->re_send_count || kref_read(&req->rl_kref) > 1) {
 		send_wr->send_flags |= IB_SEND_SIGNALED;
-		ep->rep_send_count = ep->rep_send_batch;
+		ep->re_send_count = ep->re_send_batch;
 	} else {
 		send_wr->send_flags &= ~IB_SEND_SIGNALED;
-		--ep->rep_send_count;
+		--ep->re_send_count;
 	}
 
-	rc = frwr_send(ia, req);
+	rc = frwr_send(r_xprt, req);
 	trace_xprtrdma_post_send(req, rc);
 	if (rc)
 		return -ENOTCONN;
@@ -1542,7 +1371,7 @@ rpcrdma_ep_post(struct rpcrdma_ia *ia,
 void rpcrdma_post_recvs(struct rpcrdma_xprt *r_xprt, bool temp)
 {
 	struct rpcrdma_buffer *buf = &r_xprt->rx_buf;
-	struct rpcrdma_ep *ep = &r_xprt->rx_ep;
+	struct rpcrdma_ep *ep = r_xprt->rx_ep;
 	struct ib_recv_wr *wr, *bad_wr;
 	struct rpcrdma_rep *rep;
 	int needed, count, rc;
@@ -1551,9 +1380,9 @@ void rpcrdma_post_recvs(struct rpcrdma_xprt *r_xprt, bool temp)
 	count = 0;
 
 	needed = buf->rb_credits + (buf->rb_bc_srv_max_requests << 1);
-	if (likely(ep->rep_receive_count > needed))
+	if (likely(ep->re_receive_count > needed))
 		goto out;
-	needed -= ep->rep_receive_count;
+	needed -= ep->re_receive_count;
 	if (!temp)
 		needed += RPCRDMA_MAX_RECV_BATCH;
 
@@ -1579,7 +1408,7 @@ void rpcrdma_post_recvs(struct rpcrdma_xprt *r_xprt, bool temp)
 	if (!wr)
 		goto out;
 
-	rc = ib_post_recv(r_xprt->rx_ia.ri_id->qp, wr,
+	rc = ib_post_recv(ep->re_id->qp, wr,
 			  (const struct ib_recv_wr **)&bad_wr);
 out:
 	trace_xprtrdma_post_recvs(r_xprt, count, rc);
@@ -1593,6 +1422,6 @@ void rpcrdma_post_recvs(struct rpcrdma_xprt *r_xprt, bool temp)
 			--count;
 		}
 	}
-	ep->rep_receive_count += count;
+	ep->re_receive_count += count;
 	return;
 }
diff --git a/net/sunrpc/xprtrdma/xprt_rdma.h b/net/sunrpc/xprtrdma/xprt_rdma.h
index 37d5080..0a16fdb 100644
--- a/net/sunrpc/xprtrdma/xprt_rdma.h
+++ b/net/sunrpc/xprtrdma/xprt_rdma.h
@@ -65,43 +65,33 @@
 #define RPCRDMA_IDLE_DISC_TO	(5U * 60 * HZ)
 
 /*
- * Interface Adapter -- one per transport instance
+ * RDMA Endpoint -- connection endpoint details
  */
-struct rpcrdma_ia {
-	struct rdma_cm_id 	*ri_id;
-	struct ib_pd		*ri_pd;
-	int			ri_async_rc;
-	unsigned int		ri_max_rdma_segs;
-	unsigned int		ri_max_frwr_depth;
-	bool			ri_implicit_roundup;
-	enum ib_mr_type		ri_mrtype;
-	unsigned long		ri_flags;
-	struct completion	ri_done;
-	struct completion	ri_remove_done;
-};
-
-enum {
-	RPCRDMA_IAF_REMOVING = 0,
-};
-
-/*
- * RDMA Endpoint -- one per transport instance
- */
-
 struct rpcrdma_ep {
-	unsigned int		rep_send_count;
-	unsigned int		rep_send_batch;
-	unsigned int		rep_max_inline_send;
-	unsigned int		rep_max_inline_recv;
-	int			rep_connected;
-	struct ib_qp_init_attr	rep_attr;
-	wait_queue_head_t 	rep_connect_wait;
-	struct rpcrdma_connect_private	rep_cm_private;
-	struct rdma_conn_param	rep_remote_cma;
-	unsigned int		rep_max_requests;	/* depends on device */
-	unsigned int		rep_inline_send;	/* negotiated */
-	unsigned int		rep_inline_recv;	/* negotiated */
-	int			rep_receive_count;
+	struct kref		re_kref;
+	struct rdma_cm_id 	*re_id;
+	struct ib_pd		*re_pd;
+	unsigned int		re_max_rdma_segs;
+	unsigned int		re_max_fr_depth;
+	bool			re_implicit_roundup;
+	enum ib_mr_type		re_mrtype;
+	struct completion	re_done;
+	unsigned int		re_send_count;
+	unsigned int		re_send_batch;
+	unsigned int		re_max_inline_send;
+	unsigned int		re_max_inline_recv;
+	int			re_async_rc;
+	int			re_connect_status;
+	struct ib_qp_init_attr	re_attr;
+	wait_queue_head_t       re_connect_wait;
+	struct rpc_xprt		*re_xprt;
+	struct rpcrdma_connect_private
+				re_cm_private;
+	struct rdma_conn_param	re_remote_cma;
+	int			re_receive_count;
+	unsigned int		re_max_requests; /* depends on device */
+	unsigned int		re_inline_send;	/* negotiated */
+	unsigned int		re_inline_recv;	/* negotiated */
 };
 
 /* Pre-allocate extra Work Requests for handling backward receives
@@ -422,8 +412,7 @@ struct rpcrdma_stats {
  */
 struct rpcrdma_xprt {
 	struct rpc_xprt		rx_xprt;
-	struct rpcrdma_ia	rx_ia;
-	struct rpcrdma_ep	rx_ep;
+	struct rpcrdma_ep	*rx_ep;
 	struct rpcrdma_buffer	rx_buf;
 	struct delayed_work	rx_connect_worker;
 	struct rpc_timeout	rx_timeout;
@@ -455,22 +444,13 @@ extern int xprt_rdma_pad_optimize;
 extern unsigned int xprt_rdma_memreg_strategy;
 
 /*
- * Interface Adapter calls - xprtrdma/verbs.c
- */
-int rpcrdma_ia_open(struct rpcrdma_xprt *xprt);
-void rpcrdma_ia_remove(struct rpcrdma_ia *ia);
-void rpcrdma_ia_close(struct rpcrdma_ia *);
-
-/*
  * Endpoint calls - xprtrdma/verbs.c
  */
-int rpcrdma_ep_create(struct rpcrdma_xprt *r_xprt);
-void rpcrdma_ep_destroy(struct rpcrdma_xprt *r_xprt);
-int rpcrdma_ep_connect(struct rpcrdma_ep *, struct rpcrdma_ia *);
-void rpcrdma_ep_disconnect(struct rpcrdma_ep *, struct rpcrdma_ia *);
+void rpcrdma_flush_disconnect(struct ib_cq *cq, struct ib_wc *wc);
+int rpcrdma_xprt_connect(struct rpcrdma_xprt *r_xprt);
+void rpcrdma_xprt_disconnect(struct rpcrdma_xprt *r_xprt);
 
-int rpcrdma_ep_post(struct rpcrdma_ia *, struct rpcrdma_ep *,
-				struct rpcrdma_req *);
+int rpcrdma_post_sends(struct rpcrdma_xprt *r_xprt, struct rpcrdma_req *req);
 void rpcrdma_post_recvs(struct rpcrdma_xprt *r_xprt, bool temp);
 
 /*
@@ -536,15 +516,14 @@ rpcrdma_data_dir(bool writing)
 /* Memory registration calls xprtrdma/frwr_ops.c
  */
 void frwr_reset(struct rpcrdma_req *req);
-int frwr_query_device(struct rpcrdma_xprt *r_xprt,
-		      const struct ib_device *device);
-int frwr_init_mr(struct rpcrdma_ia *ia, struct rpcrdma_mr *mr);
+int frwr_query_device(struct rpcrdma_ep *ep, const struct ib_device *device);
+int frwr_mr_init(struct rpcrdma_xprt *r_xprt, struct rpcrdma_mr *mr);
 void frwr_release_mr(struct rpcrdma_mr *mr);
 struct rpcrdma_mr_seg *frwr_map(struct rpcrdma_xprt *r_xprt,
 				struct rpcrdma_mr_seg *seg,
 				int nsegs, bool writing, __be32 xid,
 				struct rpcrdma_mr *mr);
-int frwr_send(struct rpcrdma_ia *ia, struct rpcrdma_req *req);
+int frwr_send(struct rpcrdma_xprt *r_xprt, struct rpcrdma_req *req);
 void frwr_reminv(struct rpcrdma_rep *rep, struct list_head *mrs);
 void frwr_unmap_sync(struct rpcrdma_xprt *r_xprt, struct rpcrdma_req *req);
 void frwr_unmap_async(struct rpcrdma_xprt *r_xprt, struct rpcrdma_req *req);
@@ -569,7 +548,7 @@ int rpcrdma_prepare_send_sges(struct rpcrdma_xprt *r_xprt,
 			      enum rpcrdma_chunktype rtype);
 void rpcrdma_sendctx_unmap(struct rpcrdma_sendctx *sc);
 int rpcrdma_marshal_req(struct rpcrdma_xprt *r_xprt, struct rpc_rqst *rqst);
-void rpcrdma_set_max_header_sizes(struct rpcrdma_xprt *);
+void rpcrdma_set_max_header_sizes(struct rpcrdma_ep *ep);
 void rpcrdma_reset_cwnd(struct rpcrdma_xprt *r_xprt);
 void rpcrdma_complete_rqst(struct rpcrdma_rep *rep);
 void rpcrdma_reply_handler(struct rpcrdma_rep *rep);
diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c
index d86c664..0bda8a7 100644
--- a/net/sunrpc/xprtsock.c
+++ b/net/sunrpc/xprtsock.c
@@ -54,6 +54,7 @@
 
 #include <trace/events/sunrpc.h>
 
+#include "socklib.h"
 #include "sunrpc.h"
 
 static void xs_close(struct rpc_xprt *xprt);
@@ -749,125 +750,6 @@ xs_stream_start_connect(struct sock_xprt *transport)
 
 #define XS_SENDMSG_FLAGS	(MSG_DONTWAIT | MSG_NOSIGNAL)
 
-static int xs_sendmsg(struct socket *sock, struct msghdr *msg, size_t seek)
-{
-	if (seek)
-		iov_iter_advance(&msg->msg_iter, seek);
-	return sock_sendmsg(sock, msg);
-}
-
-static int xs_send_kvec(struct socket *sock, struct msghdr *msg, struct kvec *vec, size_t seek)
-{
-	iov_iter_kvec(&msg->msg_iter, WRITE, vec, 1, vec->iov_len);
-	return xs_sendmsg(sock, msg, seek);
-}
-
-static int xs_send_pagedata(struct socket *sock, struct msghdr *msg, struct xdr_buf *xdr, size_t base)
-{
-	int err;
-
-	err = xdr_alloc_bvec(xdr, GFP_KERNEL);
-	if (err < 0)
-		return err;
-
-	iov_iter_bvec(&msg->msg_iter, WRITE, xdr->bvec,
-			xdr_buf_pagecount(xdr),
-			xdr->page_len + xdr->page_base);
-	return xs_sendmsg(sock, msg, base + xdr->page_base);
-}
-
-#define xs_record_marker_len() sizeof(rpc_fraghdr)
-
-/* Common case:
- *  - stream transport
- *  - sending from byte 0 of the message
- *  - the message is wholly contained in @xdr's head iovec
- */
-static int xs_send_rm_and_kvec(struct socket *sock, struct msghdr *msg,
-		rpc_fraghdr marker, struct kvec *vec, size_t base)
-{
-	struct kvec iov[2] = {
-		[0] = {
-			.iov_base	= &marker,
-			.iov_len	= sizeof(marker)
-		},
-		[1] = *vec,
-	};
-	size_t len = iov[0].iov_len + iov[1].iov_len;
-
-	iov_iter_kvec(&msg->msg_iter, WRITE, iov, 2, len);
-	return xs_sendmsg(sock, msg, base);
-}
-
-/**
- * xs_sendpages - write pages directly to a socket
- * @sock: socket to send on
- * @addr: UDP only -- address of destination
- * @addrlen: UDP only -- length of destination address
- * @xdr: buffer containing this request
- * @base: starting position in the buffer
- * @rm: stream record marker field
- * @sent_p: return the total number of bytes successfully queued for sending
- *
- */
-static int xs_sendpages(struct socket *sock, struct sockaddr *addr, int addrlen, struct xdr_buf *xdr, unsigned int base, rpc_fraghdr rm, int *sent_p)
-{
-	struct msghdr msg = {
-		.msg_name = addr,
-		.msg_namelen = addrlen,
-		.msg_flags = XS_SENDMSG_FLAGS | MSG_MORE,
-	};
-	unsigned int rmsize = rm ? sizeof(rm) : 0;
-	unsigned int remainder = rmsize + xdr->len - base;
-	unsigned int want;
-	int err = 0;
-
-	if (unlikely(!sock))
-		return -ENOTSOCK;
-
-	want = xdr->head[0].iov_len + rmsize;
-	if (base < want) {
-		unsigned int len = want - base;
-		remainder -= len;
-		if (remainder == 0)
-			msg.msg_flags &= ~MSG_MORE;
-		if (rmsize)
-			err = xs_send_rm_and_kvec(sock, &msg, rm,
-					&xdr->head[0], base);
-		else
-			err = xs_send_kvec(sock, &msg, &xdr->head[0], base);
-		if (remainder == 0 || err != len)
-			goto out;
-		*sent_p += err;
-		base = 0;
-	} else
-		base -= want;
-
-	if (base < xdr->page_len) {
-		unsigned int len = xdr->page_len - base;
-		remainder -= len;
-		if (remainder == 0)
-			msg.msg_flags &= ~MSG_MORE;
-		err = xs_send_pagedata(sock, &msg, xdr, base);
-		if (remainder == 0 || err != len)
-			goto out;
-		*sent_p += err;
-		base = 0;
-	} else
-		base -= xdr->page_len;
-
-	if (base >= xdr->tail[0].iov_len)
-		return 0;
-	msg.msg_flags &= ~MSG_MORE;
-	err = xs_send_kvec(sock, &msg, &xdr->tail[0], base);
-out:
-	if (err > 0) {
-		*sent_p += err;
-		err = 0;
-	}
-	return err;
-}
-
 /**
  * xs_nospace - handle transmit was incomplete
  * @req: pointer to RPC request
@@ -959,8 +841,11 @@ static int xs_local_send_request(struct rpc_rqst *req)
 	struct xdr_buf *xdr = &req->rq_snd_buf;
 	rpc_fraghdr rm = xs_stream_record_marker(xdr);
 	unsigned int msglen = rm ? req->rq_slen + sizeof(rm) : req->rq_slen;
+	struct msghdr msg = {
+		.msg_flags	= XS_SENDMSG_FLAGS,
+	};
+	unsigned int uninitialized_var(sent);
 	int status;
-	int sent = 0;
 
 	/* Close the stream if the previous transmission was incomplete */
 	if (xs_send_request_was_aborted(transport, req)) {
@@ -972,8 +857,8 @@ static int xs_local_send_request(struct rpc_rqst *req)
 			req->rq_svec->iov_base, req->rq_svec->iov_len);
 
 	req->rq_xtime = ktime_get();
-	status = xs_sendpages(transport->sock, NULL, 0, xdr,
-			      transport->xmit.offset, rm, &sent);
+	status = xprt_sock_sendmsg(transport->sock, &msg, xdr,
+				   transport->xmit.offset, rm, &sent);
 	dprintk("RPC:       %s(%u) = %d\n",
 			__func__, xdr->len - transport->xmit.offset, status);
 
@@ -1025,7 +910,12 @@ static int xs_udp_send_request(struct rpc_rqst *req)
 	struct rpc_xprt *xprt = req->rq_xprt;
 	struct sock_xprt *transport = container_of(xprt, struct sock_xprt, xprt);
 	struct xdr_buf *xdr = &req->rq_snd_buf;
-	int sent = 0;
+	struct msghdr msg = {
+		.msg_name	= xs_addr(xprt),
+		.msg_namelen	= xprt->addrlen,
+		.msg_flags	= XS_SENDMSG_FLAGS,
+	};
+	unsigned int uninitialized_var(sent);
 	int status;
 
 	xs_pktdump("packet data:",
@@ -1039,8 +929,7 @@ static int xs_udp_send_request(struct rpc_rqst *req)
 		return -EBADSLT;
 
 	req->rq_xtime = ktime_get();
-	status = xs_sendpages(transport->sock, xs_addr(xprt), xprt->addrlen,
-			      xdr, 0, 0, &sent);
+	status = xprt_sock_sendmsg(transport->sock, &msg, xdr, 0, 0, &sent);
 
 	dprintk("RPC:       xs_udp_send_request(%u) = %d\n",
 			xdr->len, status);
@@ -1106,9 +995,12 @@ static int xs_tcp_send_request(struct rpc_rqst *req)
 	struct xdr_buf *xdr = &req->rq_snd_buf;
 	rpc_fraghdr rm = xs_stream_record_marker(xdr);
 	unsigned int msglen = rm ? req->rq_slen + sizeof(rm) : req->rq_slen;
+	struct msghdr msg = {
+		.msg_flags	= XS_SENDMSG_FLAGS,
+	};
 	bool vm_wait = false;
+	unsigned int uninitialized_var(sent);
 	int status;
-	int sent;
 
 	/* Close the stream if the previous transmission was incomplete */
 	if (xs_send_request_was_aborted(transport, req)) {
@@ -1129,9 +1021,8 @@ static int xs_tcp_send_request(struct rpc_rqst *req)
 	 * called sendmsg(). */
 	req->rq_xtime = ktime_get();
 	while (1) {
-		sent = 0;
-		status = xs_sendpages(transport->sock, NULL, 0, xdr,
-				      transport->xmit.offset, rm, &sent);
+		status = xprt_sock_sendmsg(transport->sock, &msg, xdr,
+					   transport->xmit.offset, rm, &sent);
 
 		dprintk("RPC:       xs_tcp_send_request(%u) = %d\n",
 				xdr->len - transport->xmit.offset, status);
@@ -1970,7 +1861,7 @@ static int xs_local_setup_socket(struct sock_xprt *transport)
 	struct rpc_xprt *xprt = &transport->xprt;
 	struct file *filp;
 	struct socket *sock;
-	int status = -EIO;
+	int status;
 
 	status = __sock_create(xprt->xprt_net, AF_LOCAL,
 					SOCK_STREAM, 0, &sock, 1);
@@ -2636,46 +2527,25 @@ static void bc_free(struct rpc_task *task)
 	free_page((unsigned long)buf);
 }
 
-/*
- * Use the svc_sock to send the callback. Must be called with svsk->sk_mutex
- * held. Borrows heavily from svc_tcp_sendto and xs_tcp_send_request.
- */
 static int bc_sendto(struct rpc_rqst *req)
 {
-	int len;
-	struct xdr_buf *xbufp = &req->rq_snd_buf;
+	struct xdr_buf *xdr = &req->rq_snd_buf;
 	struct sock_xprt *transport =
 			container_of(req->rq_xprt, struct sock_xprt, xprt);
-	unsigned long headoff;
-	unsigned long tailoff;
-	struct page *tailpage;
 	struct msghdr msg = {
-		.msg_flags	= MSG_MORE
+		.msg_flags	= 0,
 	};
 	rpc_fraghdr marker = cpu_to_be32(RPC_LAST_STREAM_FRAGMENT |
-					 (u32)xbufp->len);
-	struct kvec iov = {
-		.iov_base	= &marker,
-		.iov_len	= sizeof(marker),
-	};
+					 (u32)xdr->len);
+	unsigned int sent = 0;
+	int err;
 
 	req->rq_xtime = ktime_get();
-
-	len = kernel_sendmsg(transport->sock, &msg, &iov, 1, iov.iov_len);
-	if (len != iov.iov_len)
+	err = xprt_sock_sendmsg(transport->sock, &msg, xdr, 0, marker, &sent);
+	xdr_free_bvec(xdr);
+	if (err < 0 || sent != (xdr->len + sizeof(marker)))
 		return -EAGAIN;
-
-	tailpage = NULL;
-	if (xbufp->tail[0].iov_len)
-		tailpage = virt_to_page(xbufp->tail[0].iov_base);
-	tailoff = (unsigned long)xbufp->tail[0].iov_base & ~PAGE_MASK;
-	headoff = (unsigned long)xbufp->head[0].iov_base & ~PAGE_MASK;
-	len = svc_send_common(transport->sock, xbufp,
-			      virt_to_page(xbufp->head[0].iov_base), headoff,
-			      tailpage, tailoff);
-	if (len != xbufp->len)
-		return -EAGAIN;
-	return len;
+	return sent;
 }
 
 /*
diff --git a/net/tipc/link.c b/net/tipc/link.c
index 467c53a..d4675e9 100644
--- a/net/tipc/link.c
+++ b/net/tipc/link.c
@@ -1065,7 +1065,7 @@ static void tipc_link_update_cwin(struct tipc_link *l, int released,
 	/* Enter fast recovery */
 	if (unlikely(retransmitted)) {
 		l->ssthresh = max_t(u16, l->window / 2, 300);
-		l->window = l->ssthresh;
+		l->window = min_t(u16, l->ssthresh, l->window);
 		return;
 	}
 	/* Enter slow start */
diff --git a/net/tls/tls_main.c b/net/tls/tls_main.c
index 156efce..0e98900 100644
--- a/net/tls/tls_main.c
+++ b/net/tls/tls_main.c
@@ -56,9 +56,9 @@ enum {
 	TLS_NUM_PROTS,
 };
 
-static struct proto *saved_tcpv6_prot;
+static const struct proto *saved_tcpv6_prot;
 static DEFINE_MUTEX(tcpv6_prot_mutex);
-static struct proto *saved_tcpv4_prot;
+static const struct proto *saved_tcpv4_prot;
 static DEFINE_MUTEX(tcpv4_prot_mutex);
 static struct proto tls_prots[TLS_NUM_PROTS][TLS_NUM_CONFIG][TLS_NUM_CONFIG];
 static struct proto_ops tls_sw_proto_ops;
diff --git a/net/wireless/.gitignore b/net/wireless/.gitignore
index 61cbc30..1a29cd6 100644
--- a/net/wireless/.gitignore
+++ b/net/wireless/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 shipped-certs.c
 extra-certs.c
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 5fa4021..692bcd3 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -644,10 +644,8 @@ const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
 	[NL80211_ATTR_HE_CAPABILITY] = { .type = NLA_BINARY,
 					 .len = NL80211_HE_MAX_CAPABILITY_LEN },
 
-	[NL80211_ATTR_FTM_RESPONDER] = {
-		.type = NLA_NESTED,
-		.validation_data = nl80211_ftm_responder_policy,
-	},
+	[NL80211_ATTR_FTM_RESPONDER] =
+		NLA_POLICY_NESTED(nl80211_ftm_responder_policy),
 	[NL80211_ATTR_TIMEOUT] = NLA_POLICY_MIN(NLA_U32, 1),
 	[NL80211_ATTR_PEER_MEASUREMENTS] =
 		NLA_POLICY_NESTED(nl80211_pmsr_attr_policy),
diff --git a/net/xdp/xdp_umem.c b/net/xdp/xdp_umem.c
index fa7bb5e..ed7a606 100644
--- a/net/xdp/xdp_umem.c
+++ b/net/xdp/xdp_umem.c
@@ -343,7 +343,7 @@ static int xdp_umem_reg(struct xdp_umem *umem, struct xdp_umem_reg *mr)
 	u32 chunk_size = mr->chunk_size, headroom = mr->headroom;
 	unsigned int chunks, chunks_per_page;
 	u64 addr = mr->addr, size = mr->len;
-	int size_chk, err;
+	int err;
 
 	if (chunk_size < XDP_UMEM_MIN_CHUNK_SIZE || chunk_size > PAGE_SIZE) {
 		/* Strictly speaking we could support this, if:
@@ -382,8 +382,7 @@ static int xdp_umem_reg(struct xdp_umem *umem, struct xdp_umem_reg *mr)
 			return -EINVAL;
 	}
 
-	size_chk = chunk_size - headroom - XDP_PACKET_HEADROOM;
-	if (size_chk < 0)
+	if (headroom >= chunk_size - XDP_PACKET_HEADROOM)
 		return -EINVAL;
 
 	umem->address = (unsigned long)addr;
diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c
index 356f90e..c350108 100644
--- a/net/xdp/xsk.c
+++ b/net/xdp/xsk.c
@@ -131,8 +131,9 @@ static void __xsk_rcv_memcpy(struct xdp_umem *umem, u64 addr, void *from_buf,
 		u64 page_start = addr & ~(PAGE_SIZE - 1);
 		u64 first_len = PAGE_SIZE - (addr - page_start);
 
-		memcpy(to_buf, from_buf, first_len + metalen);
-		memcpy(next_pg_addr, from_buf + first_len, len - first_len);
+		memcpy(to_buf, from_buf, first_len);
+		memcpy(next_pg_addr, from_buf + first_len,
+		       len + metalen - first_len);
 
 		return;
 	}
diff --git a/samples/auxdisplay/.gitignore b/samples/auxdisplay/.gitignore
index 7af2228..2ed744c 100644
--- a/samples/auxdisplay/.gitignore
+++ b/samples/auxdisplay/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 cfag12864b-example
diff --git a/samples/bpf/.gitignore b/samples/bpf/.gitignore
index 74d31fd..23837f2 100644
--- a/samples/bpf/.gitignore
+++ b/samples/bpf/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 cpustat
 fds_example
 hbm
diff --git a/samples/connector/.gitignore b/samples/connector/.gitignore
index d2b9c32..d86f2ff 100644
--- a/samples/connector/.gitignore
+++ b/samples/connector/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 ucon
diff --git a/samples/hidraw/.gitignore b/samples/hidraw/.gitignore
index 05e51a6..d7a6074 100644
--- a/samples/hidraw/.gitignore
+++ b/samples/hidraw/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 hid-example
diff --git a/samples/hw_breakpoint/data_breakpoint.c b/samples/hw_breakpoint/data_breakpoint.c
index c585047..418c46f 100644
--- a/samples/hw_breakpoint/data_breakpoint.c
+++ b/samples/hw_breakpoint/data_breakpoint.c
@@ -23,7 +23,7 @@
 
 struct perf_event * __percpu *sample_hbp;
 
-static char ksym_name[KSYM_NAME_LEN] = "pid_max";
+static char ksym_name[KSYM_NAME_LEN] = "jiffies";
 module_param_string(ksym, ksym_name, KSYM_NAME_LEN, S_IRUGO);
 MODULE_PARM_DESC(ksym, "Kernel symbol to monitor; this module will report any"
 			" write operations on the kernel symbol");
@@ -41,11 +41,15 @@ static int __init hw_break_module_init(void)
 {
 	int ret;
 	struct perf_event_attr attr;
+	void *addr = __symbol_get(ksym_name);
+
+	if (!addr)
+		return -ENXIO;
 
 	hw_breakpoint_init(&attr);
-	attr.bp_addr = kallsyms_lookup_name(ksym_name);
+	attr.bp_addr = (unsigned long)addr;
 	attr.bp_len = HW_BREAKPOINT_LEN_4;
-	attr.bp_type = HW_BREAKPOINT_W | HW_BREAKPOINT_R;
+	attr.bp_type = HW_BREAKPOINT_W;
 
 	sample_hbp = register_wide_hw_breakpoint(&attr, sample_hbp_handler, NULL);
 	if (IS_ERR((void __force *)sample_hbp)) {
@@ -66,6 +70,7 @@ static int __init hw_break_module_init(void)
 static void __exit hw_break_module_exit(void)
 {
 	unregister_wide_hw_breakpoint(sample_hbp);
+	symbol_put(ksym_name);
 	printk(KERN_INFO "HW Breakpoint for %s write uninstalled\n", ksym_name);
 }
 
diff --git a/samples/mei/.gitignore b/samples/mei/.gitignore
index f356b81..db5e802 100644
--- a/samples/mei/.gitignore
+++ b/samples/mei/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 mei-amt-version
diff --git a/samples/mic/mpssd/.gitignore b/samples/mic/mpssd/.gitignore
index 8b7c72f..aa03f1e 100644
--- a/samples/mic/mpssd/.gitignore
+++ b/samples/mic/mpssd/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 mpssd
diff --git a/samples/pidfd/.gitignore b/samples/pidfd/.gitignore
index be52b3b..eea857f 100644
--- a/samples/pidfd/.gitignore
+++ b/samples/pidfd/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 pidfd-metadata
diff --git a/samples/seccomp/.gitignore b/samples/seccomp/.gitignore
index d1e2e81..4a5a5b7 100644
--- a/samples/seccomp/.gitignore
+++ b/samples/seccomp/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 bpf-direct
 bpf-fancy
 dropper
diff --git a/samples/timers/.gitignore b/samples/timers/.gitignore
index c5c45d7..40510c3 100644
--- a/samples/timers/.gitignore
+++ b/samples/timers/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 hpet_example
diff --git a/samples/vfs/.gitignore b/samples/vfs/.gitignore
index 0806eb0..8fdabf7 100644
--- a/samples/vfs/.gitignore
+++ b/samples/vfs/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 test-fsmount
 test-statx
diff --git a/samples/watchdog/.gitignore b/samples/watchdog/.gitignore
index ff0ebb5..74153b8 100644
--- a/samples/watchdog/.gitignore
+++ b/samples/watchdog/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 watchdog-simple
diff --git a/scripts/.gitignore b/scripts/.gitignore
index ef45f96..0d1c8e2 100644
--- a/scripts/.gitignore
+++ b/scripts/.gitignore
@@ -1,6 +1,4 @@
-#
-# Generated files
-#
+# SPDX-License-Identifier: GPL-2.0-only
 bin2c
 kallsyms
 unifdef
diff --git a/scripts/Kconfig.include b/scripts/Kconfig.include
index 8074f14..c264da2 100644
--- a/scripts/Kconfig.include
+++ b/scripts/Kconfig.include
@@ -48,9 +48,6 @@
 # Fail if the linker is gold as it's not capable of linking the kernel proper
 $(error-if,$(success, $(LD) -v | grep -q gold), gold linker '$(LD)' not supported)
 
-# gcc version including patch level
-gcc-version := $(shell,$(srctree)/scripts/gcc-version.sh $(CC))
-
 # machine bit flags
 #  $(m32-flag): -m32 if the compiler supports it, or an empty string otherwise.
 #  $(m64-flag): -m64 if the compiler supports it, or an empty string otherwise.
diff --git a/scripts/Makefile b/scripts/Makefile
index 5e75802..95ecf970 100644
--- a/scripts/Makefile
+++ b/scripts/Makefile
@@ -2,10 +2,6 @@
 ###
 # scripts contains sources for various helper programs used throughout
 # the kernel for the build process.
-# ---------------------------------------------------------------------------
-# kallsyms:      Find all symbols in vmlinux
-
-HOST_EXTRACFLAGS += -I$(srctree)/tools/include
 
 always-$(CONFIG_BUILD_BIN2C)			+= bin2c
 always-$(CONFIG_KALLSYMS)			+= kallsyms
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index a1730d4..9fcbfac 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -46,7 +46,7 @@
 include scripts/Makefile.lib
 
 # Do not include host rules unless needed
-ifneq ($(hostprogs)$(hostlibs-y)$(hostlibs-m)$(hostcxxlibs-y)$(hostcxxlibs-m),)
+ifneq ($(hostprogs)$(hostcxxlibs-y)$(hostcxxlibs-m),)
 include scripts/Makefile.host
 endif
 
@@ -65,7 +65,6 @@
 
 ifneq ($(strip $(lib-y) $(lib-m) $(lib-)),)
 lib-target := $(obj)/lib.a
-real-obj-y += $(obj)/lib-ksyms.o
 endif
 
 ifdef need-builtin
@@ -410,22 +409,6 @@
 
 targets += $(lib-target)
 
-dummy-object = $(obj)/.lib_exports.o
-ksyms-lds = $(dot-target).lds
-
-quiet_cmd_export_list = EXPORTS $@
-cmd_export_list = $(OBJDUMP) -h $< | \
-	sed -ne '/___ksymtab/s/.*+\([^ ]*\).*/EXTERN(\1)/p' >$(ksyms-lds);\
-	rm -f $(dummy-object);\
-	echo | $(CC) $(a_flags) -c -o $(dummy-object) -x assembler -;\
-	$(LD) $(ld_flags) -r -o $@ -T $(ksyms-lds) $(dummy-object);\
-	rm $(dummy-object) $(ksyms-lds)
-
-$(obj)/lib-ksyms.o: $(lib-target) FORCE
-	$(call if_changed,export_list)
-
-targets += $(obj)/lib-ksyms.o
-
 endif
 
 # NOTE:
diff --git a/scripts/Makefile.clean b/scripts/Makefile.clean
index 1e42065..075f0cc 100644
--- a/scripts/Makefile.clean
+++ b/scripts/Makefile.clean
@@ -30,7 +30,6 @@
 __clean-files	:= $(extra-y) $(extra-m) $(extra-)       \
 		   $(always) $(always-y) $(always-m) $(always-) $(targets) $(clean-files)   \
 		   $(hostprogs) $(hostprogs-y) $(hostprogs-m) $(hostprogs-) \
-		   $(hostlibs-y) $(hostlibs-m) $(hostlibs-) \
 		   $(hostcxxlibs-y) $(hostcxxlibs-m)
 
 __clean-files   := $(filter-out $(no-clean-files), $(__clean-files))
diff --git a/scripts/Makefile.extrawarn b/scripts/Makefile.extrawarn
index ca08f2f..4aea7cf 100644
--- a/scripts/Makefile.extrawarn
+++ b/scripts/Makefile.extrawarn
@@ -49,6 +49,7 @@
 KBUILD_CFLAGS += -Wno-sign-compare
 KBUILD_CFLAGS += -Wno-format-zero-length
 KBUILD_CFLAGS += $(call cc-disable-warning, pointer-to-enum-cast)
+KBUILD_CFLAGS += -Wno-tautological-constant-out-of-range-compare
 endif
 
 endif
diff --git a/scripts/Makefile.host b/scripts/Makefile.host
index 3b7121d..2045855 100644
--- a/scripts/Makefile.host
+++ b/scripts/Makefile.host
@@ -39,7 +39,6 @@
 # They are linked as C++ code to the executable qconf
 
 __hostprogs := $(sort $(hostprogs))
-host-cshlib := $(sort $(hostlibs-y) $(hostlibs-m))
 host-cxxshlib := $(sort $(hostcxxlibs-y) $(hostcxxlibs-m))
 
 # C code
@@ -63,7 +62,6 @@
 host-cxxobjs	:= $(sort $(foreach m,$(host-cxxmulti),$($(m)-cxxobjs)))
 
 # Object (.o) files used by the shared libaries
-host-cshobjs	:= $(sort $(foreach m,$(host-cshlib),$($(m:.so=-objs))))
 host-cxxshobjs	:= $(sort $(foreach m,$(host-cxxshlib),$($(m:.so=-objs))))
 
 host-csingle	:= $(addprefix $(obj)/,$(host-csingle))
@@ -71,9 +69,7 @@
 host-cobjs	:= $(addprefix $(obj)/,$(host-cobjs))
 host-cxxmulti	:= $(addprefix $(obj)/,$(host-cxxmulti))
 host-cxxobjs	:= $(addprefix $(obj)/,$(host-cxxobjs))
-host-cshlib	:= $(addprefix $(obj)/,$(host-cshlib))
 host-cxxshlib	:= $(addprefix $(obj)/,$(host-cxxshlib))
-host-cshobjs	:= $(addprefix $(obj)/,$(host-cshobjs))
 host-cxxshobjs	:= $(addprefix $(obj)/,$(host-cxxshobjs))
 
 #####
@@ -141,13 +137,6 @@
 	$(call if_changed_dep,host-cxxobjs)
 
 # Compile .c file, create position independent .o file
-# host-cshobjs -> .o
-quiet_cmd_host-cshobjs	= HOSTCC  -fPIC $@
-      cmd_host-cshobjs	= $(HOSTCC) $(hostc_flags) -fPIC -c -o $@ $<
-$(host-cshobjs): $(obj)/%.o: $(src)/%.c FORCE
-	$(call if_changed_dep,host-cshobjs)
-
-# Compile .c file, create position independent .o file
 # Note that plugin capable gcc versions can be either C or C++ based
 # therefore plugin source files have to be compilable in both C and C++ mode.
 # This is why a C++ compiler is invoked on a .c file.
@@ -158,16 +147,6 @@
 	$(call if_changed_dep,host-cxxshobjs)
 
 # Link a shared library, based on position independent .o files
-# *.o -> .so shared library (host-cshlib)
-quiet_cmd_host-cshlib	= HOSTLLD -shared $@
-      cmd_host-cshlib	= $(HOSTCC) $(KBUILD_HOSTLDFLAGS) -shared -o $@ \
-			  $(addprefix $(obj)/, $($(target-stem)-objs)) \
-			  $(KBUILD_HOSTLDLIBS) $(HOSTLDLIBS_$(target-stem).so)
-$(host-cshlib): FORCE
-	$(call if_changed,host-cshlib)
-$(call multi_depend, $(host-cshlib), .so, -objs)
-
-# Link a shared library, based on position independent .o files
 # *.o -> .so shared library (host-cxxshlib)
 quiet_cmd_host-cxxshlib	= HOSTLLD -shared $@
       cmd_host-cxxshlib	= $(HOSTCXX) $(KBUILD_HOSTLDFLAGS) -shared -o $@ \
@@ -178,4 +157,4 @@
 $(call multi_depend, $(host-cxxshlib), .so, -objs)
 
 targets += $(host-csingle)  $(host-cmulti) $(host-cobjs)\
-	   $(host-cxxmulti) $(host-cxxobjs) $(host-cshlib) $(host-cshobjs) $(host-cxxshlib) $(host-cxxshobjs)
+	   $(host-cxxmulti) $(host-cxxobjs) $(host-cxxshlib) $(host-cxxshobjs)
diff --git a/scripts/Makefile.ubsan b/scripts/Makefile.ubsan
index 019771b..5b15bc4 100644
--- a/scripts/Makefile.ubsan
+++ b/scripts/Makefile.ubsan
@@ -1,16 +1,26 @@
 # SPDX-License-Identifier: GPL-2.0
 ifdef CONFIG_UBSAN
+
+ifdef CONFIG_UBSAN_ALIGNMENT
+      CFLAGS_UBSAN += $(call cc-option, -fsanitize=alignment)
+endif
+
+ifdef CONFIG_UBSAN_BOUNDS
+      CFLAGS_UBSAN += $(call cc-option, -fsanitize=bounds)
+endif
+
+ifdef CONFIG_UBSAN_MISC
       CFLAGS_UBSAN += $(call cc-option, -fsanitize=shift)
       CFLAGS_UBSAN += $(call cc-option, -fsanitize=integer-divide-by-zero)
       CFLAGS_UBSAN += $(call cc-option, -fsanitize=unreachable)
       CFLAGS_UBSAN += $(call cc-option, -fsanitize=signed-integer-overflow)
-      CFLAGS_UBSAN += $(call cc-option, -fsanitize=bounds)
       CFLAGS_UBSAN += $(call cc-option, -fsanitize=object-size)
       CFLAGS_UBSAN += $(call cc-option, -fsanitize=bool)
       CFLAGS_UBSAN += $(call cc-option, -fsanitize=enum)
+endif
 
-ifdef CONFIG_UBSAN_ALIGNMENT
-      CFLAGS_UBSAN += $(call cc-option, -fsanitize=alignment)
+ifdef CONFIG_UBSAN_TRAP
+      CFLAGS_UBSAN += $(call cc-option, -fsanitize-undefined-trap-on-error)
 endif
 
       # -fsanitize=* options makes GCC less smart than usual and
diff --git a/scripts/basic/.gitignore b/scripts/basic/.gitignore
index a776371..98ae1f5 100644
--- a/scripts/basic/.gitignore
+++ b/scripts/basic/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 fixdep
diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index a63380c..d64c67b 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -64,6 +64,7 @@
 my $allow_c99_comments = 1; # Can be overridden by --ignore C99_COMMENT_TOLERANCE
 # git output parsing needs US English output, so first set backtick child process LANGUAGE
 my $git_command ='export LANGUAGE=en_US.UTF-8; git';
+my $tabsize = 8;
 
 sub help {
 	my ($exitcode) = @_;
@@ -98,6 +99,7 @@
   --show-types               show the specific message type in the output
   --max-line-length=n        set the maximum line length, if exceeded, warn
   --min-conf-desc-length=n   set the min description length, if shorter, warn
+  --tab-size=n               set the number of spaces for tab (default 8)
   --root=PATH                PATH to the kernel tree root
   --no-summary               suppress the per-file summary
   --mailback                 only produce a report in case of warnings/errors
@@ -215,6 +217,7 @@
 	'list-types!'	=> \$list_types,
 	'max-line-length=i' => \$max_line_length,
 	'min-conf-desc-length=i' => \$min_conf_desc_length,
+	'tab-size=i'	=> \$tabsize,
 	'root=s'	=> \$root,
 	'summary!'	=> \$summary,
 	'mailback!'	=> \$mailback,
@@ -267,6 +270,9 @@
 	die "Invalid color mode: $color\n";
 }
 
+# skip TAB size 1 to avoid additional checks on $tabsize - 1
+die "Invalid TAB size: $tabsize\n" if ($tabsize < 2);
+
 sub hash_save_array_words {
 	my ($hashRef, $arrayRef) = @_;
 
@@ -804,12 +810,12 @@
 		  }x;
 	$Type	= qr{
 			$NonptrType
-			(?:(?:\s|\*|\[\])+\s*const|(?:\s|\*\s*(?:const\s*)?|\[\])+|(?:\s*\[\s*\])+)?
+			(?:(?:\s|\*|\[\])+\s*const|(?:\s|\*\s*(?:const\s*)?|\[\])+|(?:\s*\[\s*\])+){0,4}
 			(?:\s+$Inline|\s+$Modifier)*
 		  }x;
 	$TypeMisordered	= qr{
 			$NonptrTypeMisordered
-			(?:(?:\s|\*|\[\])+\s*const|(?:\s|\*\s*(?:const\s*)?|\[\])+|(?:\s*\[\s*\])+)?
+			(?:(?:\s|\*|\[\])+\s*const|(?:\s|\*\s*(?:const\s*)?|\[\])+|(?:\s*\[\s*\])+){0,4}
 			(?:\s+$Inline|\s+$Modifier)*
 		  }x;
 	$Declare	= qr{(?:$Storage\s+(?:$Inline\s+)?)?$Type};
@@ -1118,6 +1124,7 @@
 	my ($formatted_email) = @_;
 
 	my $name = "";
+	my $name_comment = "";
 	my $address = "";
 	my $comment = "";
 
@@ -1150,6 +1157,10 @@
 
 	$name = trim($name);
 	$name =~ s/^\"|\"$//g;
+	$name =~ s/(\s*\([^\)]+\))\s*//;
+	if (defined($1)) {
+		$name_comment = trim($1);
+	}
 	$address = trim($address);
 	$address =~ s/^\<|\>$//g;
 
@@ -1158,7 +1169,7 @@
 		$name = "\"$name\"";
 	}
 
-	return ($name, $address, $comment);
+	return ($name, $name_comment, $address, $comment);
 }
 
 sub format_email {
@@ -1184,6 +1195,23 @@
 	return $formatted_email;
 }
 
+sub reformat_email {
+	my ($email) = @_;
+
+	my ($email_name, $name_comment, $email_address, $comment) = parse_email($email);
+	return format_email($email_name, $email_address);
+}
+
+sub same_email_addresses {
+	my ($email1, $email2) = @_;
+
+	my ($email1_name, $name1_comment, $email1_address, $comment1) = parse_email($email1);
+	my ($email2_name, $name2_comment, $email2_address, $comment2) = parse_email($email2);
+
+	return $email1_name eq $email2_name &&
+	       $email1_address eq $email2_address;
+}
+
 sub which {
 	my ($bin) = @_;
 
@@ -1217,7 +1245,7 @@
 		if ($c eq "\t") {
 			$res .= ' ';
 			$n++;
-			for (; ($n % 8) != 0; $n++) {
+			for (; ($n % $tabsize) != 0; $n++) {
 				$res .= ' ';
 			}
 			next;
@@ -2230,7 +2258,7 @@
 sub tabify {
 	my ($leading) = @_;
 
-	my $source_indent = 8;
+	my $source_indent = $tabsize;
 	my $max_spaces_before_tab = $source_indent - 1;
 	my $spaces_to_tab = " " x $source_indent;
 
@@ -2272,6 +2300,19 @@
 	return length(expand_tabs(substr($line, 0, $last_openparen))) + 1;
 }
 
+sub get_raw_comment {
+	my ($line, $rawline) = @_;
+	my $comment = '';
+
+	for my $i (0 .. (length($line) - 1)) {
+		if (substr($line, $i, 1) eq "$;") {
+			$comment .= substr($rawline, $i, 1);
+		}
+	}
+
+	return $comment;
+}
+
 sub process {
 	my $filename = shift;
 
@@ -2294,6 +2335,7 @@
 	my $is_binding_patch = -1;
 	my $in_header_lines = $file ? 0 : 1;
 	my $in_commit_log = 0;		#Scanning lines before patch
+	my $has_patch_separator = 0;	#Found a --- line
 	my $has_commit_log = 0;		#Encountered lines before patch
 	my $commit_log_lines = 0;	#Number of commit log lines
 	my $commit_log_possible_stack_dump = 0;
@@ -2433,6 +2475,7 @@
 		$sline =~ s/$;/ /g;	#with comments as spaces
 
 		my $rawline = $rawlines[$linenr - 1];
+		my $raw_comment = get_raw_comment($line, $rawline);
 
 # check if it's a mode change, rename or start of a patch
 		if (!$in_commit_log &&
@@ -2604,21 +2647,26 @@
 			$author = $1;
 			$author = encode("utf8", $author) if ($line =~ /=\?utf-8\?/i);
 			$author =~ s/"//g;
+			$author = reformat_email($author);
 		}
 
 # Check the patch for a signoff:
-		if ($line =~ /^\s*signed-off-by:/i) {
+		if ($line =~ /^\s*signed-off-by:\s*(.*)/i) {
 			$signoff++;
 			$in_commit_log = 0;
 			if ($author ne '') {
-				my $l = $line;
-				$l =~ s/"//g;
-				if ($l =~ /^\s*signed-off-by:\s*\Q$author\E/i) {
-				    $authorsignoff = 1;
+				if (same_email_addresses($1, $author)) {
+					$authorsignoff = 1;
 				}
 			}
 		}
 
+# Check for patch separator
+		if ($line =~ /^---$/) {
+			$has_patch_separator = 1;
+			$in_commit_log = 0;
+		}
+
 # Check if MAINTAINERS is being updated.  If so, there's probably no need to
 # emit the "does MAINTAINERS need updating?" message on file add/move/delete
 		if ($line =~ /^\s*MAINTAINERS\s*\|/) {
@@ -2664,7 +2712,7 @@
 				}
 			}
 
-			my ($email_name, $email_address, $comment) = parse_email($email);
+			my ($email_name, $name_comment, $email_address, $comment) = parse_email($email);
 			my $suggested_email = format_email(($email_name, $email_address));
 			if ($suggested_email eq "") {
 				ERROR("BAD_SIGN_OFF",
@@ -2675,9 +2723,7 @@
 				$dequoted =~ s/" </ </;
 				# Don't force email to have quotes
 				# Allow just an angle bracketed address
-				if ("$dequoted$comment" ne $email &&
-				    "<$email_address>$comment" ne $email &&
-				    "$suggested_email$comment" ne $email) {
+				if (!same_email_addresses($email, $suggested_email)) {
 					WARN("BAD_SIGN_OFF",
 					     "email address '$email' might be better as '$suggested_email$comment'\n" . $herecurr);
 				}
@@ -2720,10 +2766,10 @@
 			     "A patch subject line should describe the change not the tool that found it\n" . $herecurr);
 		}
 
-# Check for unwanted Gerrit info
-		if ($in_commit_log && $line =~ /^\s*change-id:/i) {
+# Check for Gerrit Change-Ids not in any patch context
+		if ($realfile eq '' && !$has_patch_separator && $line =~ /^\s*change-id:/i) {
 			ERROR("GERRIT_CHANGE_ID",
-			      "Remove Gerrit Change-Id's before submitting upstream.\n" . $herecurr);
+			      "Remove Gerrit Change-Id's before submitting upstream\n" . $herecurr);
 		}
 
 # Check if the commit log is in a possible stack dump
@@ -2761,7 +2807,7 @@
 
 # Check for git id commit length and improperly formed commit descriptions
 		if ($in_commit_log && !$commit_log_possible_stack_dump &&
-		    $line !~ /^\s*(?:Link|Patchwork|http|https|BugLink):/i &&
+		    $line !~ /^\s*(?:Link|Patchwork|http|https|BugLink|base-commit):/i &&
 		    $line !~ /^This reverts commit [0-9a-f]{7,40}/ &&
 		    ($line =~ /\bcommit\s+[0-9a-f]{5,}\b/i ||
 		     ($line =~ /(?:\s|^)[0-9a-f]{12,40}(?:[\s"'\(\[]|$)/i &&
@@ -3087,7 +3133,7 @@
 					$comment = '/*';
 				} elsif ($realfile =~ /\.(c|dts|dtsi)$/) {
 					$comment = '//';
-				} elsif (($checklicenseline == 2) || $realfile =~ /\.(sh|pl|py|awk|tc)$/) {
+				} elsif (($checklicenseline == 2) || $realfile =~ /\.(sh|pl|py|awk|tc|yaml)$/) {
 					$comment = '#';
 				} elsif ($realfile =~ /\.rst$/) {
 					$comment = '..';
@@ -3111,6 +3157,17 @@
 						WARN("SPDX_LICENSE_TAG",
 						     "'$spdx_license' is not supported in LICENSES/...\n" . $herecurr);
 					}
+					if ($realfile =~ m@^Documentation/devicetree/bindings/@ &&
+					    not $spdx_license =~ /GPL-2\.0.*BSD-2-Clause/) {
+						my $msg_level = \&WARN;
+						$msg_level = \&CHK if ($file);
+						if (&{$msg_level}("SPDX_LICENSE_TAG",
+
+								  "DT binding documents should be licensed (GPL-2.0-only OR BSD-2-Clause)\n" . $herecurr) &&
+						    $fix) {
+							$fixed[$fixlinenr] =~ s/SPDX-License-Identifier: .*/SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)/;
+						}
+					}
 				}
 			}
 		}
@@ -3198,7 +3255,7 @@
 		next if ($realfile !~ /\.(h|c|pl|dtsi|dts)$/);
 
 # at the beginning of a line any tabs must come first and anything
-# more than 8 must use tabs.
+# more than $tabsize must use tabs.
 		if ($rawline =~ /^\+\s* \t\s*\S/ ||
 		    $rawline =~ /^\+\s*        \s*/) {
 			my $herevet = "$here\n" . cat_vet($rawline) . "\n";
@@ -3217,7 +3274,7 @@
 				"please, no space before tabs\n" . $herevet) &&
 			    $fix) {
 				while ($fixed[$fixlinenr] =~
-					   s/(^\+.*) {8,8}\t/$1\t\t/) {}
+					   s/(^\+.*) {$tabsize,$tabsize}\t/$1\t\t/) {}
 				while ($fixed[$fixlinenr] =~
 					   s/(^\+.*) +\t/$1\t/) {}
 			}
@@ -3239,11 +3296,11 @@
 		if ($perl_version_ok &&
 		    $sline =~ /^\+\t+( +)(?:$c90_Keywords\b|\{\s*$|\}\s*(?:else\b|while\b|\s*$)|$Declare\s*$Ident\s*[;=])/) {
 			my $indent = length($1);
-			if ($indent % 8) {
+			if ($indent % $tabsize) {
 				if (WARN("TABSTOP",
 					 "Statements should start on a tabstop\n" . $herecurr) &&
 				    $fix) {
-					$fixed[$fixlinenr] =~ s@(^\+\t+) +@$1 . "\t" x ($indent/8)@e;
+					$fixed[$fixlinenr] =~ s@(^\+\t+) +@$1 . "\t" x ($indent/$tabsize)@e;
 				}
 			}
 		}
@@ -3261,8 +3318,8 @@
 				my $newindent = $2;
 
 				my $goodtabindent = $oldindent .
-					"\t" x ($pos / 8) .
-					" "  x ($pos % 8);
+					"\t" x ($pos / $tabsize) .
+					" "  x ($pos % $tabsize);
 				my $goodspaceindent = $oldindent . " "  x $pos;
 
 				if ($newindent ne $goodtabindent &&
@@ -3733,11 +3790,11 @@
 			#print "line<$line> prevline<$prevline> indent<$indent> sindent<$sindent> check<$check> continuation<$continuation> s<$s> cond_lines<$cond_lines> stat_real<$stat_real> stat<$stat>\n";
 
 			if ($check && $s ne '' &&
-			    (($sindent % 8) != 0 ||
+			    (($sindent % $tabsize) != 0 ||
 			     ($sindent < $indent) ||
 			     ($sindent == $indent &&
 			      ($s !~ /^\s*(?:\}|\{|else\b)/)) ||
-			     ($sindent > $indent + 8))) {
+			     ($sindent > $indent + $tabsize))) {
 				WARN("SUSPECT_CODE_INDENT",
 				     "suspect code indent for conditional statements ($indent, $sindent)\n" . $herecurr . "$stat_real\n");
 			}
@@ -4014,7 +4071,7 @@
 		}
 
 # check for function declarations without arguments like "int foo()"
-		if ($line =~ /(\b$Type\s+$Ident)\s*\(\s*\)/) {
+		if ($line =~ /(\b$Type\s*$Ident)\s*\(\s*\)/) {
 			if (ERROR("FUNCTION_WITHOUT_ARGS",
 				  "Bad function definition - $1() should probably be $1(void)\n" . $herecurr) &&
 			    $fix) {
@@ -4582,7 +4639,7 @@
 					    ($op eq '>' &&
 					     $ca =~ /<\S+\@\S+$/))
 					{
-					    	$ok = 1;
+						$ok = 1;
 					}
 
 					# for asm volatile statements
@@ -4917,7 +4974,7 @@
 			# conditional.
 			substr($s, 0, length($c), '');
 			$s =~ s/\n.*//g;
-			$s =~ s/$;//g; 	# Remove any comments
+			$s =~ s/$;//g;	# Remove any comments
 			if (length($c) && $s !~ /^\s*{?\s*\\*\s*$/ &&
 			    $c !~ /}\s*while\s*/)
 			{
@@ -4956,7 +5013,7 @@
 # if and else should not have general statements after it
 		if ($line =~ /^.\s*(?:}\s*)?else\b(.*)/) {
 			my $s = $1;
-			$s =~ s/$;//g; 	# Remove any comments
+			$s =~ s/$;//g;	# Remove any comments
 			if ($s !~ /^\s*(?:\sif|(?:{|)\s*\\?\s*$)/) {
 				ERROR("TRAILING_STATEMENTS",
 				      "trailing statements should be on next line\n" . $herecurr);
@@ -5132,7 +5189,7 @@
 			{
 			}
 
-			# Flatten any obvious string concatentation.
+			# Flatten any obvious string concatenation.
 			while ($dstat =~ s/($String)\s*$Ident/$1/ ||
 			       $dstat =~ s/$Ident\s*($String)/$1/)
 			{
@@ -6230,13 +6287,17 @@
 		}
 
 # check for function declarations that have arguments without identifier names
+# while avoiding uninitialized_var(x)
 		if (defined $stat &&
-		    $stat =~ /^.\s*(?:extern\s+)?$Type\s*(?:$Ident|\(\s*\*\s*$Ident\s*\))\s*\(\s*([^{]+)\s*\)\s*;/s &&
-		    $1 ne "void") {
-			my $args = trim($1);
+		    $stat =~ /^.\s*(?:extern\s+)?$Type\s*(?:($Ident)|\(\s*\*\s*$Ident\s*\))\s*\(\s*([^{]+)\s*\)\s*;/s &&
+		    (!defined($1) ||
+		     (defined($1) && $1 ne "uninitialized_var")) &&
+		     $2 ne "void") {
+			my $args = trim($2);
 			while ($args =~ m/\s*($Type\s*(?:$Ident|\(\s*\*\s*$Ident?\s*\)\s*$balanced_parens)?)/g) {
 				my $arg = trim($1);
-				if ($arg =~ /^$Type$/ && $arg !~ /enum\s+$Ident$/) {
+				if ($arg =~ /^$Type$/ &&
+					$arg !~ /enum\s+$Ident$/) {
 					WARN("FUNCTION_ARGUMENTS",
 					     "function definition argument '$arg' should also have an identifier name\n" . $herecurr);
 				}
@@ -6389,6 +6450,28 @@
 			}
 		}
 
+# check for /* fallthrough */ like comment, prefer fallthrough;
+		my @fallthroughs = (
+			'fallthrough',
+			'@fallthrough@',
+			'lint -fallthrough[ \t]*',
+			'intentional(?:ly)?[ \t]*fall(?:(?:s | |-)[Tt]|t)hr(?:ough|u|ew)',
+			'(?:else,?\s*)?FALL(?:S | |-)?THR(?:OUGH|U|EW)[ \t.!]*(?:-[^\n\r]*)?',
+			'Fall(?:(?:s | |-)[Tt]|t)hr(?:ough|u|ew)[ \t.!]*(?:-[^\n\r]*)?',
+			'fall(?:s | |-)?thr(?:ough|u|ew)[ \t.!]*(?:-[^\n\r]*)?',
+		    );
+		if ($raw_comment ne '') {
+			foreach my $ft (@fallthroughs) {
+				if ($raw_comment =~ /$ft/) {
+					my $msg_level = \&WARN;
+					$msg_level = \&CHK if ($file);
+					&{$msg_level}("PREFER_FALLTHROUGH",
+						      "Prefer 'fallthrough;' over fallthrough comment\n" . $herecurr);
+					last;
+				}
+			}
+		}
+
 # check for switch/default statements without a break;
 		if ($perl_version_ok &&
 		    defined $stat &&
diff --git a/scripts/documentation-file-ref-check b/scripts/documentation-file-ref-check
index 997202a..c71832b 100755
--- a/scripts/documentation-file-ref-check
+++ b/scripts/documentation-file-ref-check
@@ -12,7 +12,7 @@
 # to mention a past documentation file, for example, to give credits for
 # the original work.
 my %false_positives = (
-	"Documentation/scsi/scsi_mid_low_api.txt" => "Documentation/Configure.help",
+	"Documentation/scsi/scsi_mid_low_api.rst" => "Documentation/Configure.help",
 	"drivers/vhost/vhost.c" => "Documentation/virtual/lguest/lguest.c",
 );
 
@@ -25,7 +25,7 @@
 my $warn = 0;
 
 if (! -d ".git") {
-	printf "Warning: can't check if file exists, as this is not a git tree";
+	printf "Warning: can't check if file exists, as this is not a git tree\n";
 	exit 0;
 }
 
diff --git a/scripts/dtc/.gitignore b/scripts/dtc/.gitignore
index 2e6e60d..b814e60 100644
--- a/scripts/dtc/.gitignore
+++ b/scripts/dtc/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 dtc
diff --git a/scripts/dtc/Makefile b/scripts/dtc/Makefile
index 2f3c3a7..ef85f8b 100644
--- a/scripts/dtc/Makefile
+++ b/scripts/dtc/Makefile
@@ -13,7 +13,7 @@
 HOST_EXTRACFLAGS := -I $(srctree)/$(src)/libfdt
 
 ifeq ($(shell pkg-config --exists yaml-0.1 2>/dev/null && echo yes),)
-ifneq ($(CHECK_DTBS),)
+ifneq ($(CHECK_DT_BINDING)$(CHECK_DTBS),)
 $(error dtc needs libyaml for DT schema validation support. \
 	Install the necessary libyaml development package.)
 endif
diff --git a/scripts/dtc/Makefile.dtc b/scripts/dtc/Makefile.dtc
deleted file mode 100644
index 9c467b0..0000000
--- a/scripts/dtc/Makefile.dtc
+++ /dev/null
@@ -1,23 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-# Makefile.dtc
-#
-# This is not a complete Makefile of itself.  Instead, it is designed to
-# be easily embeddable into other systems of Makefiles.
-#
-DTC_SRCS = \
-	checks.c \
-	data.c \
-	dtc.c \
-	flattree.c \
-	fstree.c \
-	livetree.c \
-	srcpos.c \
-	treesource.c \
-	util.c
-
-ifneq ($(NO_YAML),1)
-DTC_SRCS += yamltree.c
-endif
-
-DTC_GEN_SRCS = dtc-lexer.lex.c dtc-parser.tab.c
-DTC_OBJS = $(DTC_SRCS:%.c=%.o) $(DTC_GEN_SRCS:%.c=%.o)
diff --git a/scripts/dtc/checks.c b/scripts/dtc/checks.c
index 756f0fa..4b3c486 100644
--- a/scripts/dtc/checks.c
+++ b/scripts/dtc/checks.c
@@ -352,7 +352,7 @@ static void check_unit_address_vs_reg(struct check *c, struct dt_info *dti,
 			FAIL(c, dti, node, "node has a reg or ranges property, but no unit name");
 	} else {
 		if (unitname[0])
-			FAIL(c, dti, node, "node has a unit name, but no reg property");
+			FAIL(c, dti, node, "node has a unit name, but no reg or ranges property");
 	}
 }
 WARNING(unit_address_vs_reg, check_unit_address_vs_reg, NULL);
@@ -765,13 +765,15 @@ static void check_ranges_format(struct check *c, struct dt_info *dti,
 {
 	struct property *prop;
 	int c_addr_cells, p_addr_cells, c_size_cells, p_size_cells, entrylen;
+	const char *ranges = c->data;
 
-	prop = get_property(node, "ranges");
+	prop = get_property(node, ranges);
 	if (!prop)
 		return;
 
 	if (!node->parent) {
-		FAIL_PROP(c, dti, node, prop, "Root node has a \"ranges\" property");
+		FAIL_PROP(c, dti, node, prop, "Root node has a \"%s\" property",
+			  ranges);
 		return;
 	}
 
@@ -783,23 +785,24 @@ static void check_ranges_format(struct check *c, struct dt_info *dti,
 
 	if (prop->val.len == 0) {
 		if (p_addr_cells != c_addr_cells)
-			FAIL_PROP(c, dti, node, prop, "empty \"ranges\" property but its "
+			FAIL_PROP(c, dti, node, prop, "empty \"%s\" property but its "
 				  "#address-cells (%d) differs from %s (%d)",
-				  c_addr_cells, node->parent->fullpath,
+				  ranges, c_addr_cells, node->parent->fullpath,
 				  p_addr_cells);
 		if (p_size_cells != c_size_cells)
-			FAIL_PROP(c, dti, node, prop, "empty \"ranges\" property but its "
+			FAIL_PROP(c, dti, node, prop, "empty \"%s\" property but its "
 				  "#size-cells (%d) differs from %s (%d)",
-				  c_size_cells, node->parent->fullpath,
+				  ranges, c_size_cells, node->parent->fullpath,
 				  p_size_cells);
 	} else if ((prop->val.len % entrylen) != 0) {
-		FAIL_PROP(c, dti, node, prop, "\"ranges\" property has invalid length (%d bytes) "
+		FAIL_PROP(c, dti, node, prop, "\"%s\" property has invalid length (%d bytes) "
 			  "(parent #address-cells == %d, child #address-cells == %d, "
-			  "#size-cells == %d)", prop->val.len,
+			  "#size-cells == %d)", ranges, prop->val.len,
 			  p_addr_cells, c_addr_cells, c_size_cells);
 	}
 }
-WARNING(ranges_format, check_ranges_format, NULL, &addr_size_cells);
+WARNING(ranges_format, check_ranges_format, "ranges", &addr_size_cells);
+WARNING(dma_ranges_format, check_ranges_format, "dma-ranges", &addr_size_cells);
 
 static const struct bus_type pci_bus = {
 	.name = "PCI",
@@ -1780,7 +1783,7 @@ static struct check *check_table[] = {
 	&property_name_chars_strict,
 	&node_name_chars_strict,
 
-	&addr_size_cells, &reg_format, &ranges_format,
+	&addr_size_cells, &reg_format, &ranges_format, &dma_ranges_format,
 
 	&unit_address_vs_reg,
 	&unit_address_format,
diff --git a/scripts/dtc/libfdt/Makefile.libfdt b/scripts/dtc/libfdt/Makefile.libfdt
deleted file mode 100644
index e546397..0000000
--- a/scripts/dtc/libfdt/Makefile.libfdt
+++ /dev/null
@@ -1,18 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
-# Makefile.libfdt
-#
-# This is not a complete Makefile of itself.  Instead, it is designed to
-# be easily embeddable into other systems of Makefiles.
-#
-LIBFDT_soname = libfdt.$(SHAREDLIB_EXT).1
-LIBFDT_INCLUDES = fdt.h libfdt.h libfdt_env.h
-LIBFDT_VERSION = version.lds
-LIBFDT_SRCS = fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c fdt_empty_tree.c \
-	fdt_addresses.c fdt_overlay.c
-LIBFDT_OBJS = $(LIBFDT_SRCS:%.c=%.o)
-LIBFDT_LIB = libfdt-$(DTC_VERSION).$(SHAREDLIB_EXT)
-
-libfdt_clean:
-	@$(VECHO) CLEAN "(libfdt)"
-	rm -f $(STD_CLEANFILES:%=$(LIBFDT_dir)/%)
-	rm -f $(LIBFDT_dir)/$(LIBFDT_soname)
diff --git a/scripts/dtc/libfdt/fdt.c b/scripts/dtc/libfdt/fdt.c
index d6ce7c0..c28fcc1 100644
--- a/scripts/dtc/libfdt/fdt.c
+++ b/scripts/dtc/libfdt/fdt.c
@@ -19,15 +19,21 @@ int32_t fdt_ro_probe_(const void *fdt)
 {
 	uint32_t totalsize = fdt_totalsize(fdt);
 
+	if (can_assume(VALID_DTB))
+		return totalsize;
+
 	if (fdt_magic(fdt) == FDT_MAGIC) {
 		/* Complete tree */
-		if (fdt_version(fdt) < FDT_FIRST_SUPPORTED_VERSION)
-			return -FDT_ERR_BADVERSION;
-		if (fdt_last_comp_version(fdt) > FDT_LAST_SUPPORTED_VERSION)
-			return -FDT_ERR_BADVERSION;
+		if (!can_assume(LATEST)) {
+			if (fdt_version(fdt) < FDT_FIRST_SUPPORTED_VERSION)
+				return -FDT_ERR_BADVERSION;
+			if (fdt_last_comp_version(fdt) >
+					FDT_LAST_SUPPORTED_VERSION)
+				return -FDT_ERR_BADVERSION;
+		}
 	} else if (fdt_magic(fdt) == FDT_SW_MAGIC) {
 		/* Unfinished sequential-write blob */
-		if (fdt_size_dt_struct(fdt) == 0)
+		if (!can_assume(VALID_INPUT) && fdt_size_dt_struct(fdt) == 0)
 			return -FDT_ERR_BADSTATE;
 	} else {
 		return -FDT_ERR_BADMAGIC;
@@ -70,43 +76,58 @@ size_t fdt_header_size_(uint32_t version)
 		return FDT_V17_SIZE;
 }
 
+size_t fdt_header_size(const void *fdt)
+{
+	return can_assume(LATEST) ? FDT_V17_SIZE :
+		fdt_header_size_(fdt_version(fdt));
+}
+
 int fdt_check_header(const void *fdt)
 {
 	size_t hdrsize;
 
 	if (fdt_magic(fdt) != FDT_MAGIC)
 		return -FDT_ERR_BADMAGIC;
+	if (!can_assume(LATEST)) {
+		if ((fdt_version(fdt) < FDT_FIRST_SUPPORTED_VERSION)
+		    || (fdt_last_comp_version(fdt) >
+			FDT_LAST_SUPPORTED_VERSION))
+			return -FDT_ERR_BADVERSION;
+		if (fdt_version(fdt) < fdt_last_comp_version(fdt))
+			return -FDT_ERR_BADVERSION;
+	}
 	hdrsize = fdt_header_size(fdt);
-	if ((fdt_version(fdt) < FDT_FIRST_SUPPORTED_VERSION)
-	    || (fdt_last_comp_version(fdt) > FDT_LAST_SUPPORTED_VERSION))
-		return -FDT_ERR_BADVERSION;
-	if (fdt_version(fdt) < fdt_last_comp_version(fdt))
-		return -FDT_ERR_BADVERSION;
+	if (!can_assume(VALID_DTB)) {
 
-	if ((fdt_totalsize(fdt) < hdrsize)
-	    || (fdt_totalsize(fdt) > INT_MAX))
-		return -FDT_ERR_TRUNCATED;
-
-	/* Bounds check memrsv block */
-	if (!check_off_(hdrsize, fdt_totalsize(fdt), fdt_off_mem_rsvmap(fdt)))
-		return -FDT_ERR_TRUNCATED;
-
-	/* Bounds check structure block */
-	if (fdt_version(fdt) < 17) {
-		if (!check_off_(hdrsize, fdt_totalsize(fdt),
-				fdt_off_dt_struct(fdt)))
+		if ((fdt_totalsize(fdt) < hdrsize)
+		    || (fdt_totalsize(fdt) > INT_MAX))
 			return -FDT_ERR_TRUNCATED;
-	} else {
-		if (!check_block_(hdrsize, fdt_totalsize(fdt),
-				  fdt_off_dt_struct(fdt),
-				  fdt_size_dt_struct(fdt)))
+
+		/* Bounds check memrsv block */
+		if (!check_off_(hdrsize, fdt_totalsize(fdt),
+				fdt_off_mem_rsvmap(fdt)))
 			return -FDT_ERR_TRUNCATED;
 	}
 
-	/* Bounds check strings block */
-	if (!check_block_(hdrsize, fdt_totalsize(fdt),
-			  fdt_off_dt_strings(fdt), fdt_size_dt_strings(fdt)))
-		return -FDT_ERR_TRUNCATED;
+	if (!can_assume(VALID_DTB)) {
+		/* Bounds check structure block */
+		if (!can_assume(LATEST) && fdt_version(fdt) < 17) {
+			if (!check_off_(hdrsize, fdt_totalsize(fdt),
+					fdt_off_dt_struct(fdt)))
+				return -FDT_ERR_TRUNCATED;
+		} else {
+			if (!check_block_(hdrsize, fdt_totalsize(fdt),
+					  fdt_off_dt_struct(fdt),
+					  fdt_size_dt_struct(fdt)))
+				return -FDT_ERR_TRUNCATED;
+		}
+
+		/* Bounds check strings block */
+		if (!check_block_(hdrsize, fdt_totalsize(fdt),
+				  fdt_off_dt_strings(fdt),
+				  fdt_size_dt_strings(fdt)))
+			return -FDT_ERR_TRUNCATED;
+	}
 
 	return 0;
 }
@@ -115,12 +136,13 @@ const void *fdt_offset_ptr(const void *fdt, int offset, unsigned int len)
 {
 	unsigned absoffset = offset + fdt_off_dt_struct(fdt);
 
-	if ((absoffset < offset)
-	    || ((absoffset + len) < absoffset)
-	    || (absoffset + len) > fdt_totalsize(fdt))
-		return NULL;
+	if (!can_assume(VALID_INPUT))
+		if ((absoffset < offset)
+		    || ((absoffset + len) < absoffset)
+		    || (absoffset + len) > fdt_totalsize(fdt))
+			return NULL;
 
-	if (fdt_version(fdt) >= 0x11)
+	if (can_assume(LATEST) || fdt_version(fdt) >= 0x11)
 		if (((offset + len) < offset)
 		    || ((offset + len) > fdt_size_dt_struct(fdt)))
 			return NULL;
@@ -137,7 +159,7 @@ uint32_t fdt_next_tag(const void *fdt, int startoffset, int *nextoffset)
 
 	*nextoffset = -FDT_ERR_TRUNCATED;
 	tagp = fdt_offset_ptr(fdt, offset, FDT_TAGSIZE);
-	if (!tagp)
+	if (!can_assume(VALID_DTB) && !tagp)
 		return FDT_END; /* premature end */
 	tag = fdt32_to_cpu(*tagp);
 	offset += FDT_TAGSIZE;
@@ -149,18 +171,19 @@ uint32_t fdt_next_tag(const void *fdt, int startoffset, int *nextoffset)
 		do {
 			p = fdt_offset_ptr(fdt, offset++, 1);
 		} while (p && (*p != '\0'));
-		if (!p)
+		if (!can_assume(VALID_DTB) && !p)
 			return FDT_END; /* premature end */
 		break;
 
 	case FDT_PROP:
 		lenp = fdt_offset_ptr(fdt, offset, sizeof(*lenp));
-		if (!lenp)
+		if (!can_assume(VALID_DTB) && !lenp)
 			return FDT_END; /* premature end */
 		/* skip-name offset, length and value */
 		offset += sizeof(struct fdt_property) - FDT_TAGSIZE
 			+ fdt32_to_cpu(*lenp);
-		if (fdt_version(fdt) < 0x10 && fdt32_to_cpu(*lenp) >= 8 &&
+		if (!can_assume(LATEST) &&
+		    fdt_version(fdt) < 0x10 && fdt32_to_cpu(*lenp) >= 8 &&
 		    ((offset - fdt32_to_cpu(*lenp)) % 8) != 0)
 			offset += 4;
 		break;
@@ -183,6 +206,8 @@ uint32_t fdt_next_tag(const void *fdt, int startoffset, int *nextoffset)
 
 int fdt_check_node_offset_(const void *fdt, int offset)
 {
+	if (can_assume(VALID_INPUT))
+		return offset;
 	if ((offset < 0) || (offset % FDT_TAGSIZE)
 	    || (fdt_next_tag(fdt, offset, &offset) != FDT_BEGIN_NODE))
 		return -FDT_ERR_BADOFFSET;
diff --git a/scripts/dtc/libfdt/fdt_ro.c b/scripts/dtc/libfdt/fdt_ro.c
index a5c2797..e03570a 100644
--- a/scripts/dtc/libfdt/fdt_ro.c
+++ b/scripts/dtc/libfdt/fdt_ro.c
@@ -33,17 +33,26 @@ static int fdt_nodename_eq_(const void *fdt, int offset,
 
 const char *fdt_get_string(const void *fdt, int stroffset, int *lenp)
 {
-	int32_t totalsize = fdt_ro_probe_(fdt);
-	uint32_t absoffset = stroffset + fdt_off_dt_strings(fdt);
+	int32_t totalsize;
+	uint32_t absoffset;
 	size_t len;
 	int err;
 	const char *s, *n;
 
+	if (can_assume(VALID_INPUT)) {
+		s = (const char *)fdt + fdt_off_dt_strings(fdt) + stroffset;
+
+		if (lenp)
+			*lenp = strlen(s);
+		return s;
+	}
+	totalsize = fdt_ro_probe_(fdt);
 	err = totalsize;
 	if (totalsize < 0)
 		goto fail;
 
 	err = -FDT_ERR_BADOFFSET;
+	absoffset = stroffset + fdt_off_dt_strings(fdt);
 	if (absoffset >= totalsize)
 		goto fail;
 	len = totalsize - absoffset;
@@ -51,7 +60,7 @@ const char *fdt_get_string(const void *fdt, int stroffset, int *lenp)
 	if (fdt_magic(fdt) == FDT_MAGIC) {
 		if (stroffset < 0)
 			goto fail;
-		if (fdt_version(fdt) >= 17) {
+		if (can_assume(LATEST) || fdt_version(fdt) >= 17) {
 			if (stroffset >= fdt_size_dt_strings(fdt))
 				goto fail;
 			if ((fdt_size_dt_strings(fdt) - stroffset) < len)
@@ -151,10 +160,13 @@ static const struct fdt_reserve_entry *fdt_mem_rsv(const void *fdt, int n)
 	int offset = n * sizeof(struct fdt_reserve_entry);
 	int absoffset = fdt_off_mem_rsvmap(fdt) + offset;
 
-	if (absoffset < fdt_off_mem_rsvmap(fdt))
-		return NULL;
-	if (absoffset > fdt_totalsize(fdt) - sizeof(struct fdt_reserve_entry))
-		return NULL;
+	if (!can_assume(VALID_INPUT)) {
+		if (absoffset < fdt_off_mem_rsvmap(fdt))
+			return NULL;
+		if (absoffset > fdt_totalsize(fdt) -
+		    sizeof(struct fdt_reserve_entry))
+			return NULL;
+	}
 	return fdt_mem_rsv_(fdt, n);
 }
 
@@ -164,7 +176,7 @@ int fdt_get_mem_rsv(const void *fdt, int n, uint64_t *address, uint64_t *size)
 
 	FDT_RO_PROBE(fdt);
 	re = fdt_mem_rsv(fdt, n);
-	if (!re)
+	if (!can_assume(VALID_INPUT) && !re)
 		return -FDT_ERR_BADOFFSET;
 
 	*address = fdt64_ld(&re->address);
@@ -295,7 +307,7 @@ const char *fdt_get_name(const void *fdt, int nodeoffset, int *len)
 
 	nameptr = nh->name;
 
-	if (fdt_version(fdt) < 0x10) {
+	if (!can_assume(LATEST) && fdt_version(fdt) < 0x10) {
 		/*
 		 * For old FDT versions, match the naming conventions of V16:
 		 * give only the leaf name (after all /). The actual tree
@@ -346,7 +358,8 @@ static const struct fdt_property *fdt_get_property_by_offset_(const void *fdt,
 	int err;
 	const struct fdt_property *prop;
 
-	if ((err = fdt_check_prop_offset_(fdt, offset)) < 0) {
+	if (!can_assume(VALID_INPUT) &&
+	    (err = fdt_check_prop_offset_(fdt, offset)) < 0) {
 		if (lenp)
 			*lenp = err;
 		return NULL;
@@ -367,7 +380,7 @@ const struct fdt_property *fdt_get_property_by_offset(const void *fdt,
 	/* Prior to version 16, properties may need realignment
 	 * and this API does not work. fdt_getprop_*() will, however. */
 
-	if (fdt_version(fdt) < 0x10) {
+	if (!can_assume(LATEST) && fdt_version(fdt) < 0x10) {
 		if (lenp)
 			*lenp = -FDT_ERR_BADVERSION;
 		return NULL;
@@ -388,7 +401,8 @@ static const struct fdt_property *fdt_get_property_namelen_(const void *fdt,
 	     (offset = fdt_next_property_offset(fdt, offset))) {
 		const struct fdt_property *prop;
 
-		if (!(prop = fdt_get_property_by_offset_(fdt, offset, lenp))) {
+		prop = fdt_get_property_by_offset_(fdt, offset, lenp);
+		if (!can_assume(LIBFDT_FLAWLESS) && !prop) {
 			offset = -FDT_ERR_INTERNAL;
 			break;
 		}
@@ -413,7 +427,7 @@ const struct fdt_property *fdt_get_property_namelen(const void *fdt,
 {
 	/* Prior to version 16, properties may need realignment
 	 * and this API does not work. fdt_getprop_*() will, however. */
-	if (fdt_version(fdt) < 0x10) {
+	if (!can_assume(LATEST) && fdt_version(fdt) < 0x10) {
 		if (lenp)
 			*lenp = -FDT_ERR_BADVERSION;
 		return NULL;
@@ -444,8 +458,8 @@ const void *fdt_getprop_namelen(const void *fdt, int nodeoffset,
 		return NULL;
 
 	/* Handle realignment */
-	if (fdt_version(fdt) < 0x10 && (poffset + sizeof(*prop)) % 8 &&
-	    fdt32_ld(&prop->len) >= 8)
+	if (!can_assume(LATEST) && fdt_version(fdt) < 0x10 &&
+	    (poffset + sizeof(*prop)) % 8 && fdt32_ld(&prop->len) >= 8)
 		return prop->data + 4;
 	return prop->data;
 }
@@ -461,19 +475,24 @@ const void *fdt_getprop_by_offset(const void *fdt, int offset,
 	if (namep) {
 		const char *name;
 		int namelen;
-		name = fdt_get_string(fdt, fdt32_ld(&prop->nameoff),
-				      &namelen);
-		if (!name) {
-			if (lenp)
-				*lenp = namelen;
-			return NULL;
+
+		if (!can_assume(VALID_INPUT)) {
+			name = fdt_get_string(fdt, fdt32_ld(&prop->nameoff),
+					      &namelen);
+			if (!name) {
+				if (lenp)
+					*lenp = namelen;
+				return NULL;
+			}
+			*namep = name;
+		} else {
+			*namep = fdt_string(fdt, fdt32_ld(&prop->nameoff));
 		}
-		*namep = name;
 	}
 
 	/* Handle realignment */
-	if (fdt_version(fdt) < 0x10 && (offset + sizeof(*prop)) % 8 &&
-	    fdt32_ld(&prop->len) >= 8)
+	if (!can_assume(LATEST) && fdt_version(fdt) < 0x10 &&
+	    (offset + sizeof(*prop)) % 8 && fdt32_ld(&prop->len) >= 8)
 		return prop->data + 4;
 	return prop->data;
 }
@@ -598,10 +617,12 @@ int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset,
 		}
 	}
 
-	if ((offset == -FDT_ERR_NOTFOUND) || (offset >= 0))
-		return -FDT_ERR_BADOFFSET;
-	else if (offset == -FDT_ERR_BADOFFSET)
-		return -FDT_ERR_BADSTRUCTURE;
+	if (!can_assume(VALID_INPUT)) {
+		if ((offset == -FDT_ERR_NOTFOUND) || (offset >= 0))
+			return -FDT_ERR_BADOFFSET;
+		else if (offset == -FDT_ERR_BADOFFSET)
+			return -FDT_ERR_BADSTRUCTURE;
+	}
 
 	return offset; /* error from fdt_next_node() */
 }
@@ -613,7 +634,8 @@ int fdt_node_depth(const void *fdt, int nodeoffset)
 
 	err = fdt_supernode_atdepth_offset(fdt, nodeoffset, 0, &nodedepth);
 	if (err)
-		return (err < 0) ? err : -FDT_ERR_INTERNAL;
+		return (can_assume(LIBFDT_FLAWLESS) || err < 0) ? err :
+			-FDT_ERR_INTERNAL;
 	return nodedepth;
 }
 
@@ -833,66 +855,3 @@ int fdt_node_offset_by_compatible(const void *fdt, int startoffset,
 
 	return offset; /* error from fdt_next_node() */
 }
-
-int fdt_check_full(const void *fdt, size_t bufsize)
-{
-	int err;
-	int num_memrsv;
-	int offset, nextoffset = 0;
-	uint32_t tag;
-	unsigned depth = 0;
-	const void *prop;
-	const char *propname;
-
-	if (bufsize < FDT_V1_SIZE)
-		return -FDT_ERR_TRUNCATED;
-	err = fdt_check_header(fdt);
-	if (err != 0)
-		return err;
-	if (bufsize < fdt_totalsize(fdt))
-		return -FDT_ERR_TRUNCATED;
-
-	num_memrsv = fdt_num_mem_rsv(fdt);
-	if (num_memrsv < 0)
-		return num_memrsv;
-
-	while (1) {
-		offset = nextoffset;
-		tag = fdt_next_tag(fdt, offset, &nextoffset);
-
-		if (nextoffset < 0)
-			return nextoffset;
-
-		switch (tag) {
-		case FDT_NOP:
-			break;
-
-		case FDT_END:
-			if (depth != 0)
-				return -FDT_ERR_BADSTRUCTURE;
-			return 0;
-
-		case FDT_BEGIN_NODE:
-			depth++;
-			if (depth > INT_MAX)
-				return -FDT_ERR_BADSTRUCTURE;
-			break;
-
-		case FDT_END_NODE:
-			if (depth == 0)
-				return -FDT_ERR_BADSTRUCTURE;
-			depth--;
-			break;
-
-		case FDT_PROP:
-			prop = fdt_getprop_by_offset(fdt, offset, &propname,
-						     &err);
-			if (!prop)
-				return err;
-			break;
-
-		default:
-			return -FDT_ERR_INTERNAL;
-		}
-	}
-}
diff --git a/scripts/dtc/libfdt/fdt_rw.c b/scripts/dtc/libfdt/fdt_rw.c
index 8795947..524b520 100644
--- a/scripts/dtc/libfdt/fdt_rw.c
+++ b/scripts/dtc/libfdt/fdt_rw.c
@@ -24,14 +24,16 @@ static int fdt_blocks_misordered_(const void *fdt,
 
 static int fdt_rw_probe_(void *fdt)
 {
+	if (can_assume(VALID_DTB))
+		return 0;
 	FDT_RO_PROBE(fdt);
 
-	if (fdt_version(fdt) < 17)
+	if (!can_assume(LATEST) && fdt_version(fdt) < 17)
 		return -FDT_ERR_BADVERSION;
 	if (fdt_blocks_misordered_(fdt, sizeof(struct fdt_reserve_entry),
 				   fdt_size_dt_struct(fdt)))
 		return -FDT_ERR_BADLAYOUT;
-	if (fdt_version(fdt) > 17)
+	if (!can_assume(LATEST) && fdt_version(fdt) > 17)
 		fdt_set_version(fdt, 17);
 
 	return 0;
@@ -44,7 +46,7 @@ static int fdt_rw_probe_(void *fdt)
 			return err_; \
 	}
 
-static inline int fdt_data_size_(void *fdt)
+static inline unsigned int fdt_data_size_(void *fdt)
 {
 	return fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt);
 }
@@ -52,15 +54,16 @@ static inline int fdt_data_size_(void *fdt)
 static int fdt_splice_(void *fdt, void *splicepoint, int oldlen, int newlen)
 {
 	char *p = splicepoint;
-	char *end = (char *)fdt + fdt_data_size_(fdt);
+	unsigned int dsize = fdt_data_size_(fdt);
+	size_t soff = p - (char *)fdt;
 
-	if (((p + oldlen) < p) || ((p + oldlen) > end))
+	if ((oldlen < 0) || (soff + oldlen < soff) || (soff + oldlen > dsize))
 		return -FDT_ERR_BADOFFSET;
-	if ((p < (char *)fdt) || ((end - oldlen + newlen) < (char *)fdt))
+	if ((p < (char *)fdt) || (dsize + newlen < oldlen))
 		return -FDT_ERR_BADOFFSET;
-	if ((end - oldlen + newlen) > ((char *)fdt + fdt_totalsize(fdt)))
+	if (dsize - oldlen + newlen > fdt_totalsize(fdt))
 		return -FDT_ERR_NOSPACE;
-	memmove(p + newlen, p + oldlen, end - p - oldlen);
+	memmove(p + newlen, p + oldlen, ((char *)fdt + dsize) - (p + oldlen));
 	return 0;
 }
 
@@ -112,6 +115,15 @@ static int fdt_splice_string_(void *fdt, int newlen)
 	return 0;
 }
 
+/**
+ * fdt_find_add_string_() - Find or allocate a string
+ *
+ * @fdt: pointer to the device tree to check/adjust
+ * @s: string to find/add
+ * @allocated: Set to 0 if the string was found, 1 if not found and so
+ *	allocated. Ignored if can_assume(NO_ROLLBACK)
+ * @return offset of string in the string table (whether found or added)
+ */
 static int fdt_find_add_string_(void *fdt, const char *s, int *allocated)
 {
 	char *strtab = (char *)fdt + fdt_off_dt_strings(fdt);
@@ -120,7 +132,8 @@ static int fdt_find_add_string_(void *fdt, const char *s, int *allocated)
 	int len = strlen(s) + 1;
 	int err;
 
-	*allocated = 0;
+	if (!can_assume(NO_ROLLBACK))
+		*allocated = 0;
 
 	p = fdt_find_string_(strtab, fdt_size_dt_strings(fdt), s);
 	if (p)
@@ -132,7 +145,8 @@ static int fdt_find_add_string_(void *fdt, const char *s, int *allocated)
 	if (err)
 		return err;
 
-	*allocated = 1;
+	if (!can_assume(NO_ROLLBACK))
+		*allocated = 1;
 
 	memcpy(new, s, len);
 	return (new - strtab);
@@ -206,7 +220,8 @@ static int fdt_add_property_(void *fdt, int nodeoffset, const char *name,
 
 	err = fdt_splice_struct_(fdt, *prop, 0, proplen);
 	if (err) {
-		if (allocated)
+		/* Delete the string if we failed to add it */
+		if (!can_assume(NO_ROLLBACK) && allocated)
 			fdt_del_last_string_(fdt, name);
 		return err;
 	}
@@ -411,7 +426,7 @@ int fdt_open_into(const void *fdt, void *buf, int bufsize)
 	mem_rsv_size = (fdt_num_mem_rsv(fdt)+1)
 		* sizeof(struct fdt_reserve_entry);
 
-	if (fdt_version(fdt) >= 17) {
+	if (can_assume(LATEST) || fdt_version(fdt) >= 17) {
 		struct_size = fdt_size_dt_struct(fdt);
 	} else {
 		struct_size = 0;
@@ -421,7 +436,8 @@ int fdt_open_into(const void *fdt, void *buf, int bufsize)
 			return struct_size;
 	}
 
-	if (!fdt_blocks_misordered_(fdt, mem_rsv_size, struct_size)) {
+	if (can_assume(LIBFDT_ORDER) |
+	    !fdt_blocks_misordered_(fdt, mem_rsv_size, struct_size)) {
 		/* no further work necessary */
 		err = fdt_move(fdt, buf, bufsize);
 		if (err)
diff --git a/scripts/dtc/libfdt/fdt_sw.c b/scripts/dtc/libfdt/fdt_sw.c
index 76bea22..26759d5 100644
--- a/scripts/dtc/libfdt/fdt_sw.c
+++ b/scripts/dtc/libfdt/fdt_sw.c
@@ -12,10 +12,13 @@
 
 static int fdt_sw_probe_(void *fdt)
 {
-	if (fdt_magic(fdt) == FDT_MAGIC)
-		return -FDT_ERR_BADSTATE;
-	else if (fdt_magic(fdt) != FDT_SW_MAGIC)
-		return -FDT_ERR_BADMAGIC;
+	if (!can_assume(VALID_INPUT)) {
+		if (fdt_magic(fdt) == FDT_MAGIC)
+			return -FDT_ERR_BADSTATE;
+		else if (fdt_magic(fdt) != FDT_SW_MAGIC)
+			return -FDT_ERR_BADMAGIC;
+	}
+
 	return 0;
 }
 
@@ -38,7 +41,7 @@ static int fdt_sw_probe_memrsv_(void *fdt)
 	if (err)
 		return err;
 
-	if (fdt_off_dt_strings(fdt) != 0)
+	if (!can_assume(VALID_INPUT) && fdt_off_dt_strings(fdt) != 0)
 		return -FDT_ERR_BADSTATE;
 	return 0;
 }
@@ -64,7 +67,8 @@ static int fdt_sw_probe_struct_(void *fdt)
 	if (err)
 		return err;
 
-	if (fdt_off_dt_strings(fdt) != fdt_totalsize(fdt))
+	if (!can_assume(VALID_INPUT) &&
+	    fdt_off_dt_strings(fdt) != fdt_totalsize(fdt))
 		return -FDT_ERR_BADSTATE;
 	return 0;
 }
@@ -151,7 +155,8 @@ int fdt_resize(void *fdt, void *buf, int bufsize)
 	headsize = fdt_off_dt_struct(fdt) + fdt_size_dt_struct(fdt);
 	tailsize = fdt_size_dt_strings(fdt);
 
-	if ((headsize + tailsize) > fdt_totalsize(fdt))
+	if (!can_assume(VALID_DTB) &&
+	    headsize + tailsize > fdt_totalsize(fdt))
 		return -FDT_ERR_INTERNAL;
 
 	if ((headsize + tailsize) > bufsize)
diff --git a/scripts/dtc/libfdt/libfdt.h b/scripts/dtc/libfdt/libfdt.h
index 8907b09..36fadcd 100644
--- a/scripts/dtc/libfdt/libfdt.h
+++ b/scripts/dtc/libfdt/libfdt.h
@@ -266,11 +266,12 @@ fdt_set_hdr_(size_dt_struct);
  * fdt_header_size - return the size of the tree's header
  * @fdt: pointer to a flattened device tree
  */
+size_t fdt_header_size(const void *fdt);
+
+/**
+ * fdt_header_size_ - internal function which takes a version number
+ */
 size_t fdt_header_size_(uint32_t version);
-static inline size_t fdt_header_size(const void *fdt)
-{
-	return fdt_header_size_(fdt_version(fdt));
-}
 
 /**
  * fdt_check_header - sanity check a device tree header
diff --git a/scripts/dtc/libfdt/libfdt_internal.h b/scripts/dtc/libfdt/libfdt_internal.h
index 058c735..d4e0bd4 100644
--- a/scripts/dtc/libfdt/libfdt_internal.h
+++ b/scripts/dtc/libfdt/libfdt_internal.h
@@ -48,4 +48,126 @@ static inline struct fdt_reserve_entry *fdt_mem_rsv_w_(void *fdt, int n)
 
 #define FDT_SW_MAGIC		(~FDT_MAGIC)
 
+/**********************************************************************/
+/* Checking controls                                                  */
+/**********************************************************************/
+
+#ifndef FDT_ASSUME_MASK
+#define FDT_ASSUME_MASK 0
+#endif
+
+/*
+ * Defines assumptions which can be enabled. Each of these can be enabled
+ * individually. For maximum safety, don't enable any assumptions!
+ *
+ * For minimal code size and no safety, use ASSUME_PERFECT at your own risk.
+ * You should have another method of validating the device tree, such as a
+ * signature or hash check before using libfdt.
+ *
+ * For situations where security is not a concern it may be safe to enable
+ * ASSUME_SANE.
+ */
+enum {
+	/*
+	 * This does essentially no checks. Only the latest device-tree
+	 * version is correctly handled. Inconsistencies or errors in the device
+	 * tree may cause undefined behaviour or crashes. Invalid parameters
+	 * passed to libfdt may do the same.
+	 *
+	 * If an error occurs when modifying the tree it may leave the tree in
+	 * an intermediate (but valid) state. As an example, adding a property
+	 * where there is insufficient space may result in the property name
+	 * being added to the string table even though the property itself is
+	 * not added to the struct section.
+	 *
+	 * Only use this if you have a fully validated device tree with
+	 * the latest supported version and wish to minimise code size.
+	 */
+	ASSUME_PERFECT		= 0xff,
+
+	/*
+	 * This assumes that the device tree is sane. i.e. header metadata
+	 * and basic hierarchy are correct.
+	 *
+	 * With this assumption enabled, normal device trees produced by libfdt
+	 * and the compiler should be handled safely. Malicious device trees and
+	 * complete garbage may cause libfdt to behave badly or crash. Truncated
+	 * device trees (e.g. those only partially loaded) can also cause
+	 * problems.
+	 *
+	 * Note: Only checks that relate exclusively to the device tree itself
+	 * (not the parameters passed to libfdt) are disabled by this
+	 * assumption. This includes checking headers, tags and the like.
+	 */
+	ASSUME_VALID_DTB	= 1 << 0,
+
+	/*
+	 * This builds on ASSUME_VALID_DTB and further assumes that libfdt
+	 * functions are called with valid parameters, i.e. not trigger
+	 * FDT_ERR_BADOFFSET or offsets that are out of bounds. It disables any
+	 * extensive checking of parameters and the device tree, making various
+	 * assumptions about correctness.
+	 *
+	 * It doesn't make sense to enable this assumption unless
+	 * ASSUME_VALID_DTB is also enabled.
+	 */
+	ASSUME_VALID_INPUT	= 1 << 1,
+
+	/*
+	 * This disables checks for device-tree version and removes all code
+	 * which handles older versions.
+	 *
+	 * Only enable this if you know you have a device tree with the latest
+	 * version.
+	 */
+	ASSUME_LATEST		= 1 << 2,
+
+	/*
+	 * This assumes that it is OK for a failed addition to the device tree,
+	 * due to lack of space or some other problem, to skip any rollback
+	 * steps (such as dropping the property name from the string table).
+	 * This is safe to enable in most circumstances, even though it may
+	 * leave the tree in a sub-optimal state.
+	 */
+	ASSUME_NO_ROLLBACK	= 1 << 3,
+
+	/*
+	 * This assumes that the device tree components appear in a 'convenient'
+	 * order, i.e. the memory reservation block first, then the structure
+	 * block and finally the string block.
+	 *
+	 * This order is not specified by the device-tree specification,
+	 * but is expected by libfdt. The device-tree compiler always created
+	 * device trees with this order.
+	 *
+	 * This assumption disables a check in fdt_open_into() and removes the
+	 * ability to fix the problem there. This is safe if you know that the
+	 * device tree is correctly ordered. See fdt_blocks_misordered_().
+	 */
+	ASSUME_LIBFDT_ORDER	= 1 << 4,
+
+	/*
+	 * This assumes that libfdt itself does not have any internal bugs. It
+	 * drops certain checks that should never be needed unless libfdt has an
+	 * undiscovered bug.
+	 *
+	 * This can generally be considered safe to enable.
+	 */
+	ASSUME_LIBFDT_FLAWLESS	= 1 << 5,
+};
+
+/**
+ * can_assume_() - check if a particular assumption is enabled
+ *
+ * @mask: Mask to check (ASSUME_...)
+ * @return true if that assumption is enabled, else false
+ */
+static inline bool can_assume_(int mask)
+{
+	return FDT_ASSUME_MASK & mask;
+}
+
+/** helper macros for checking assumptions */
+#define can_assume(_assume)	can_assume_(ASSUME_ ## _assume)
+
 #endif /* LIBFDT_INTERNAL_H */
diff --git a/scripts/dtc/update-dtc-source.sh b/scripts/dtc/update-dtc-source.sh
index 7dd29a0..bc704e2 100755
--- a/scripts/dtc/update-dtc-source.sh
+++ b/scripts/dtc/update-dtc-source.sh
@@ -32,9 +32,9 @@
 DTC_LINUX_PATH=`pwd`/scripts/dtc
 
 DTC_SOURCE="checks.c data.c dtc.c dtc.h flattree.c fstree.c livetree.c srcpos.c \
-		srcpos.h treesource.c util.c util.h version_gen.h yamltree.c Makefile.dtc \
+		srcpos.h treesource.c util.c util.h version_gen.h yamltree.c \
 		dtc-lexer.l dtc-parser.y"
-LIBFDT_SOURCE="Makefile.libfdt fdt.c fdt.h fdt_addresses.c fdt_empty_tree.c \
+LIBFDT_SOURCE="fdt.c fdt.h fdt_addresses.c fdt_empty_tree.c \
 		fdt_overlay.c fdt_ro.c fdt_rw.c fdt_strerror.c fdt_sw.c \
 		fdt_wip.c libfdt.h libfdt_env.h libfdt_internal.h"
 
diff --git a/scripts/dtc/version_gen.h b/scripts/dtc/version_gen.h
index 6dba95d..61dd711 100644
--- a/scripts/dtc/version_gen.h
+++ b/scripts/dtc/version_gen.h
@@ -1 +1 @@
-#define DTC_VERSION "DTC 1.5.0-gc40aeb60"
+#define DTC_VERSION "DTC 1.6.0-g87a656ae"
diff --git a/scripts/dummy-tools/gcc b/scripts/dummy-tools/gcc
new file mode 100755
index 0000000..33487e9
--- /dev/null
+++ b/scripts/dummy-tools/gcc
@@ -0,0 +1,91 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Staring v4.18, Kconfig evaluates compiler capabilities, and hides CONFIG
+# options your compiler does not support. This works well if you configure and
+# build the kernel on the same host machine.
+#
+# It is inconvenient if you prepare the .config that is carried to a different
+# build environment (typically this happens when you package the kernel for
+# distros) because using a different compiler potentially produces different
+# CONFIG options than the real build environment. So, you probably want to make
+# as many options visible as possible. In other words, you need to create a
+# super-set of CONFIG options that cover any build environment. If some of the
+# CONFIG options turned out to be unsupported on the build machine, they are
+# automatically disabled by the nature of Kconfig.
+#
+# However, it is not feasible to get a full-featured compiler for every arch.
+# Hence these dummy toolchains to make all compiler tests pass.
+#
+# Usage:
+#
+# From the top directory of the source tree, run
+#
+#   $ make CROSS_COMPILE=scripts/dummy-tools/ oldconfig
+#
+# Most of compiler features are tested by cc-option, which simply checks the
+# exit code of $(CC). This script does nothing and just exits with 0 in most
+# cases. So, $(cc-option, ...) is evaluated as 'y'.
+#
+# This scripts caters to more checks; handle --version and pre-process __GNUC__
+# etc. to pretend to be GCC, and also do right things to satisfy some scripts.
+
+# Check if the first parameter appears in the rest. Succeeds if found.
+# This helper is useful if a particular option was passed to this script.
+# Typically used like this:
+#   arg_contain <word-you-are-searching-for> "$@"
+arg_contain ()
+{
+	search="$1"
+	shift
+
+	while [ $# -gt 0 ]
+	do
+		if [ "$search" = "$1" ]; then
+			return 0
+		fi
+		shift
+	done
+
+	return 1
+}
+
+# To set CONFIG_CC_IS_GCC=y
+if arg_contain --version "$@"; then
+	echo "gcc (scripts/dummy-tools/gcc)"
+	exit 0
+fi
+
+if arg_contain -E "$@"; then
+	# For scripts/gcc-version.sh; This emulates GCC 20.0.0
+	if arg_contain - "$@"; then
+		sed 's/^__GNUC__$/20/; s/^__GNUC_MINOR__$/0/; s/^__GNUC_PATCHLEVEL__$/0/'
+		exit 0
+	else
+		echo "no input files" >&2
+		exit 1
+	fi
+fi
+
+if arg_contain -S "$@"; then
+	# For scripts/gcc-x86-*-has-stack-protector.sh
+	if arg_contain -fstack-protector "$@"; then
+		echo "%gs"
+		exit 0
+	fi
+fi
+
+# For scripts/gcc-plugin.sh
+if arg_contain -print-file-name=plugin "$@"; then
+	plugin_dir=$(mktemp -d)
+
+	sed -n 's/.*#include "\(.*\)"/\1/p' $(dirname $0)/../gcc-plugins/gcc-common.h |
+	while read header
+	do
+		mkdir -p $plugin_dir/include/$(dirname $header)
+		touch $plugin_dir/include/$header
+	done
+
+	echo $plugin_dir
+	exit 0
+fi
diff --git a/scripts/dummy-tools/ld b/scripts/dummy-tools/ld
new file mode 100755
index 0000000..f682330
--- /dev/null
+++ b/scripts/dummy-tools/ld
@@ -0,0 +1,30 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0-only
+
+# Dummy script that always succeeds.
+
+# Check if the first parameter appears in the rest. Succeeds if found.
+# This helper is useful if a particular option was passed to this script.
+# Typically used like this:
+#   arg_contain <word-you-are-searching-for> "$@"
+arg_contain ()
+{
+	search="$1"
+	shift
+
+	while [ $# -gt 0 ]
+	do
+		if [ "$search" = "$1" ]; then
+			return 0
+		fi
+		shift
+	done
+
+	return 1
+}
+
+if arg_contain --version "$@" || arg_contain -v "$@"; then
+	progname=$(basename $0)
+	echo "GNU $progname (scripts/dummy-tools/$progname) 2.50"
+	exit 0
+fi
diff --git a/scripts/dummy-tools/nm b/scripts/dummy-tools/nm
new file mode 120000
index 0000000..c0648b3
--- /dev/null
+++ b/scripts/dummy-tools/nm
@@ -0,0 +1 @@
+ld
\ No newline at end of file
diff --git a/scripts/dummy-tools/objcopy b/scripts/dummy-tools/objcopy
new file mode 120000
index 0000000..c0648b3
--- /dev/null
+++ b/scripts/dummy-tools/objcopy
@@ -0,0 +1 @@
+ld
\ No newline at end of file
diff --git a/scripts/gcc-plugin.sh b/scripts/gcc-plugin.sh
index d3caefe..b79fd0b 100755
--- a/scripts/gcc-plugin.sh
+++ b/scripts/gcc-plugin.sh
@@ -1,49 +1,14 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
+
+set -e
+
 srctree=$(dirname "$0")
 
-SHOW_ERROR=
-if [ "$1" = "--show-error" ] ; then
-	SHOW_ERROR=1
-	shift || true
-fi
-
-gccplugins_dir=$($3 -print-file-name=plugin)
-plugincc=$($1 -E -x c++ - -o /dev/null -I"${srctree}"/gcc-plugins -I"${gccplugins_dir}"/include 2>&1 <<EOF
-#include "gcc-common.h"
-#if BUILDING_GCC_VERSION >= 4008 || defined(ENABLE_BUILD_WITH_CXX)
-#warning $2 CXX
-#else
-#warning $1 CC
-#endif
-EOF
-)
-
-if [ $? -ne 0 ]
-then
-	if [ -n "$SHOW_ERROR" ] ; then
-		echo "${plugincc}" >&2
-	fi
-	exit 1
-fi
-
-case "$plugincc" in
-	*"$1 CC"*)
-		echo "$1"
-		exit 0
-		;;
-
-	*"$2 CXX"*)
-		# the c++ compiler needs another test, see below
-		;;
-
-	*)
-		exit 1
-		;;
-esac
+gccplugins_dir=$($* -print-file-name=plugin)
 
 # we need a c++ compiler that supports the designated initializer GNU extension
-plugincc=$($2 -c -x c++ -std=gnu++98 - -fsyntax-only -I"${srctree}"/gcc-plugins -I"${gccplugins_dir}"/include 2>&1 <<EOF
+$HOSTCC -c -x c++ -std=gnu++98 - -fsyntax-only -I $srctree/gcc-plugins -I $gccplugins_dir/include 2>/dev/null <<EOF
 #include "gcc-common.h"
 class test {
 public:
@@ -52,15 +17,3 @@
 	.test = 1
 };
 EOF
-)
-
-if [ $? -eq 0 ]
-then
-	echo "$2"
-	exit 0
-fi
-
-if [ -n "$SHOW_ERROR" ] ; then
-	echo "${plugincc}" >&2
-fi
-exit 1
diff --git a/scripts/gcc-plugins/.gitignore b/scripts/gcc-plugins/.gitignore
index de92ed9..b04e0f0 100644
--- a/scripts/gcc-plugins/.gitignore
+++ b/scripts/gcc-plugins/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 randomize_layout_seed.h
diff --git a/scripts/gcc-plugins/Kconfig b/scripts/gcc-plugins/Kconfig
index f8ca236..013ba3a 100644
--- a/scripts/gcc-plugins/Kconfig
+++ b/scripts/gcc-plugins/Kconfig
@@ -1,13 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
-preferred-plugin-hostcc := $(if-success,[ $(gcc-version) -ge 40800 ],$(HOSTCXX),$(HOSTCC))
-
-config PLUGIN_HOSTCC
-	string
-	default "$(shell,$(srctree)/scripts/gcc-plugin.sh "$(preferred-plugin-hostcc)" "$(HOSTCXX)" "$(CC)")" if CC_IS_GCC
-	help
-	  Host compiler used to build GCC plugins.  This can be $(HOSTCXX),
-	  $(HOSTCC), or a null string if GCC plugin is unsupported.
-
 config HAVE_GCC_PLUGINS
 	bool
 	help
@@ -17,7 +8,8 @@
 menuconfig GCC_PLUGINS
 	bool "GCC plugins"
 	depends on HAVE_GCC_PLUGINS
-	depends on PLUGIN_HOSTCC != ""
+	depends on CC_IS_GCC && GCC_VERSION >= 40800
+	depends on $(success,$(srctree)/scripts/gcc-plugin.sh $(CC))
 	default y
 	help
 	  GCC plugins are loadable modules that provide extra features to the
diff --git a/scripts/gcc-plugins/Makefile b/scripts/gcc-plugins/Makefile
index efff009..f22858b 100644
--- a/scripts/gcc-plugins/Makefile
+++ b/scripts/gcc-plugins/Makefile
@@ -1,18 +1,9 @@
 # SPDX-License-Identifier: GPL-2.0
-PLUGINCC := $(CONFIG_PLUGIN_HOSTCC:"%"=%)
 GCC_PLUGINS_DIR := $(shell $(CC) -print-file-name=plugin)
 
-ifeq ($(PLUGINCC),$(HOSTCC))
-  HOSTLIBS := hostlibs
-  HOST_EXTRACFLAGS += -I$(GCC_PLUGINS_DIR)/include -I$(src) -std=gnu99 -ggdb
-  export HOST_EXTRACFLAGS
-else
-  HOSTLIBS := hostcxxlibs
-  HOST_EXTRACXXFLAGS += -I$(GCC_PLUGINS_DIR)/include -I$(src) -std=gnu++98 -fno-rtti
-  HOST_EXTRACXXFLAGS += -fno-exceptions -fasynchronous-unwind-tables -ggdb
-  HOST_EXTRACXXFLAGS += -Wno-narrowing -Wno-unused-variable -Wno-c++11-compat
-  export HOST_EXTRACXXFLAGS
-endif
+HOST_EXTRACXXFLAGS += -I$(GCC_PLUGINS_DIR)/include -I$(src) -std=gnu++98 -fno-rtti
+HOST_EXTRACXXFLAGS += -fno-exceptions -fasynchronous-unwind-tables -ggdb
+HOST_EXTRACXXFLAGS += -Wno-narrowing -Wno-unused-variable -Wno-c++11-compat
 
 $(obj)/randomize_layout_plugin.o: $(objtree)/$(obj)/randomize_layout_seed.h
 quiet_cmd_create_randomize_layout_seed = GENSEED $@
@@ -22,9 +13,9 @@
 	$(call if_changed,create_randomize_layout_seed)
 targets = randomize_layout_seed.h randomize_layout_hash.h
 
-$(HOSTLIBS)-y := $(foreach p,$(GCC_PLUGIN),$(if $(findstring /,$(p)),,$(p)))
-always-y := $($(HOSTLIBS)-y)
+hostcxxlibs-y := $(foreach p,$(GCC_PLUGIN),$(if $(findstring /,$(p)),,$(p)))
+always-y := $(hostcxxlibs-y)
 
-$(foreach p,$($(HOSTLIBS)-y:%.so=%),$(eval $(p)-objs := $(p).o))
+$(foreach p,$(hostcxxlibs-y:%.so=%),$(eval $(p)-objs := $(p).o))
 
 clean-files += *.so
diff --git a/scripts/gdb/linux/.gitignore b/scripts/gdb/linux/.gitignore
index 2573543..43234cb 100644
--- a/scripts/gdb/linux/.gitignore
+++ b/scripts/gdb/linux/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 *.pyc
 *.pyo
 constants.py
diff --git a/scripts/genksyms/.gitignore b/scripts/genksyms/.gitignore
index b119c7d..999af71 100644
--- a/scripts/genksyms/.gitignore
+++ b/scripts/genksyms/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 genksyms
diff --git a/scripts/kconfig/.gitignore b/scripts/kconfig/.gitignore
index b5bf92f..12a67fd 100644
--- a/scripts/kconfig/.gitignore
+++ b/scripts/kconfig/.gitignore
@@ -1,6 +1,4 @@
-#
-# Generated files
-#
+# SPDX-License-Identifier: GPL-2.0-only
 *.moc
 *conf-cfg
 
diff --git a/scripts/kconfig/qconf.cc b/scripts/kconfig/qconf.cc
index 50a5245..c0ac8f7 100644
--- a/scripts/kconfig/qconf.cc
+++ b/scripts/kconfig/qconf.cc
@@ -154,9 +154,9 @@
 
 		if (!sym_is_changeable(sym) && list->optMode == normalOpt) {
 			setPixmap(promptColIdx, QIcon());
-			setText(noColIdx, QString::null);
-			setText(modColIdx, QString::null);
-			setText(yesColIdx, QString::null);
+			setText(noColIdx, QString());
+			setText(modColIdx, QString());
+			setText(yesColIdx, QString());
 			break;
 		}
 		expr = sym_get_tristate_value(sym);
@@ -276,7 +276,7 @@
 	if (sym_get_string_value(item->menu->sym))
 		setText(QString::fromLocal8Bit(sym_get_string_value(item->menu->sym)));
 	else
-		setText(QString::null);
+		setText(QString());
 	Parent::show();
 	setFocus();
 }
@@ -316,7 +316,10 @@
 	setVerticalScrollMode(ScrollPerPixel);
 	setHorizontalScrollMode(ScrollPerPixel);
 
-	setHeaderLabels(QStringList() << "Option" << "Name" << "N" << "M" << "Y" << "Value");
+	if (mode == symbolMode)
+		setHeaderLabels(QStringList() << "Item" << "Name" << "N" << "M" << "Y" << "Value");
+	else
+		setHeaderLabels(QStringList() << "Option" << "Name" << "N" << "M" << "Y" << "Value");
 
 	connect(this, SIGNAL(itemSelectionChanged(void)),
 		SLOT(updateSelection(void)));
@@ -397,6 +400,11 @@
 	struct menu *menu;
 	enum prop_type type;
 
+	if (mode == symbolMode)
+		setHeaderLabels(QStringList() << "Item" << "Name" << "N" << "M" << "Y" << "Value");
+	else
+		setHeaderLabels(QStringList() << "Option" << "Name" << "N" << "M" << "Y" << "Value");
+
 	if (selectedItems().count() == 0)
 		return;
 
@@ -625,7 +633,7 @@
 			last = item;
 			continue;
 		}
-	hide:
+hide:
 		if (item && item->menu == child) {
 			last = parent->firstChild();
 			if (last == item)
@@ -690,7 +698,7 @@
 			last = item;
 			continue;
 		}
-	hide:
+hide:
 		if (item && item->menu == child) {
 			last = (ConfigItem*)parent->topLevelItem(0);
 			if (last == item)
@@ -734,7 +742,10 @@
 		type = menu->prompt ? menu->prompt->type : P_UNKNOWN;
 		if (type == P_MENU && rootEntry != menu &&
 		    mode != fullMode && mode != menuMode) {
-			emit menuSelected(menu);
+			if (mode == menuMode)
+				emit menuSelected(menu);
+			else
+				emit itemSelected(menu);
 			break;
 		}
 	case Qt::Key_Space:
@@ -826,7 +837,7 @@
 
 void ConfigList::mouseDoubleClickEvent(QMouseEvent* e)
 {
-	QPoint p = e->pos(); // TODO: Check if this works(was contentsToViewport).
+	QPoint p = e->pos();
 	ConfigItem* item = (ConfigItem*)itemAt(p);
 	struct menu *menu;
 	enum prop_type ptype;
@@ -841,9 +852,12 @@
 	if (!menu)
 		goto skip;
 	ptype = menu->prompt ? menu->prompt->type : P_UNKNOWN;
-	if (ptype == P_MENU && (mode == singleMode || mode == symbolMode))
-		emit menuSelected(menu);
-	else if (menu->sym)
+	if (ptype == P_MENU) {
+		if (mode == singleMode)
+			emit itemSelected(menu);
+		else if (mode == symbolMode)
+			emit menuSelected(menu);
+	} else if (menu->sym)
 		changeValue(item);
 
 skip:
@@ -1223,10 +1237,11 @@
 {
 	QMenu* popup = Parent::createStandardContextMenu(pos);
 	QAction* action = new QAction("Show Debug Info", popup);
-	  action->setCheckable(true);
-	  connect(action, SIGNAL(toggled(bool)), SLOT(setShowDebug(bool)));
-	  connect(this, SIGNAL(showDebugChanged(bool)), action, SLOT(setOn(bool)));
-	  action->setChecked(showDebug());
+
+	action->setCheckable(true);
+	connect(action, SIGNAL(toggled(bool)), SLOT(setShowDebug(bool)));
+	connect(this, SIGNAL(showDebugChanged(bool)), action, SLOT(setOn(bool)));
+	action->setChecked(showDebug());
 	popup->addSeparator();
 	popup->addAction(action);
 	return popup;
@@ -1352,21 +1367,32 @@
 	if ((x.isValid())&&(y.isValid()))
 		move(x.toInt(), y.toInt());
 
-	split1 = new QSplitter(this);
-	split1->setOrientation(Qt::Horizontal);
-	setCentralWidget(split1);
+	QWidget *widget = new QWidget(this);
+	QVBoxLayout *layout = new QVBoxLayout(widget);
+	setCentralWidget(widget);
 
-	menuView = new ConfigView(split1, "menu");
+	split1 = new QSplitter(widget);
+	split1->setOrientation(Qt::Horizontal);
+	split1->setChildrenCollapsible(false);
+
+	menuView = new ConfigView(widget, "menu");
 	menuList = menuView->list;
 
-	split2 = new QSplitter(split1);
+	split2 = new QSplitter(widget);
+	split2->setChildrenCollapsible(false);
 	split2->setOrientation(Qt::Vertical);
 
 	// create config tree
-	configView = new ConfigView(split2, "config");
+	configView = new ConfigView(widget, "config");
 	configList = configView->list;
 
-	helpText = new ConfigInfoView(split2, "help");
+	helpText = new ConfigInfoView(widget, "help");
+
+	layout->addWidget(split2);
+	split2->addWidget(split1);
+	split1->addWidget(configView);
+	split1->addWidget(menuView);
+	split2->addWidget(helpText);
 
 	setTabOrder(configList, helpText);
 	configList->setFocus();
@@ -1484,6 +1510,8 @@
 		helpText, SLOT(setInfo(struct menu *)));
 	connect(configList, SIGNAL(menuSelected(struct menu *)),
 		SLOT(changeMenu(struct menu *)));
+	connect(configList, SIGNAL(itemSelected(struct menu *)),
+		SLOT(changeItens(struct menu *)));
 	connect(configList, SIGNAL(parentSelected()),
 		SLOT(goBack()));
 	connect(menuList, SIGNAL(menuChanged(struct menu *)),
@@ -1580,15 +1608,26 @@
 	searchWindow->show();
 }
 
-void ConfigMainWindow::changeMenu(struct menu *menu)
+void ConfigMainWindow::changeItens(struct menu *menu)
 {
 	configList->setRootMenu(menu);
+
 	if (configList->rootEntry->parent == &rootmenu)
 		backAction->setEnabled(false);
 	else
 		backAction->setEnabled(true);
 }
 
+void ConfigMainWindow::changeMenu(struct menu *menu)
+{
+	menuList->setRootMenu(menu);
+
+	if (menuList->rootEntry->parent == &rootmenu)
+		backAction->setEnabled(false);
+	else
+		backAction->setEnabled(true);
+}
+
 void ConfigMainWindow::setMenuLink(struct menu *menu)
 {
 	struct menu *parent;
@@ -1698,14 +1737,14 @@
 	fullViewAction->setEnabled(true);
 	fullViewAction->setChecked(false);
 
-	configList->mode = symbolMode;
+	configList->mode = menuMode;
 	if (configList->rootEntry == &rootmenu)
 		configList->updateListAll();
 	else
 		configList->setRootMenu(&rootmenu);
 	configList->setAllOpen(true);
 	configApp->processEvents();
-	menuList->mode = menuMode;
+	menuList->mode = symbolMode;
 	menuList->setRootMenu(&rootmenu);
 	menuList->setAllOpen(true);
 	menuView->show();
@@ -1733,7 +1772,6 @@
 
 /*
  * ask for saving configuration before quitting
- * TODO ask only when something changed
  */
 void ConfigMainWindow::closeEvent(QCloseEvent* e)
 {
diff --git a/scripts/kconfig/qconf.h b/scripts/kconfig/qconf.h
index 45bfe9b..c879d79 100644
--- a/scripts/kconfig/qconf.h
+++ b/scripts/kconfig/qconf.h
@@ -71,6 +71,7 @@ public slots:
 signals:
 	void menuChanged(struct menu *menu);
 	void menuSelected(struct menu *menu);
+	void itemSelected(struct menu *menu);
 	void parentSelected(void);
 	void gotFocus(struct menu *);
 
@@ -298,6 +299,7 @@ class ConfigMainWindow : public QMainWindow {
 	ConfigMainWindow(void);
 public slots:
 	void changeMenu(struct menu *);
+	void changeItens(struct menu *);
 	void setMenuLink(struct menu *);
 	void listFocusChanged(void);
 	void goBack(void);
diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index f2d73f0..f746ca8 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -853,7 +853,7 @@
 
 	if ($type =~ m/([^\(]*\(\*)\s*\)\s*\(([^\)]*)\)/) {
 	    # pointer-to-function
-	    print $1 . $parameter . ") (" . $2;
+	    print $1 . $parameter . ") (" . $2 . ")";
 	} else {
 	    print $type . " " . $parameter;
 	}
diff --git a/scripts/mkcompile_h b/scripts/mkcompile_h
index 3ff26e5..5b80a46 100755
--- a/scripts/mkcompile_h
+++ b/scripts/mkcompile_h
@@ -7,6 +7,7 @@
 PREEMPT=$4
 PREEMPT_RT=$5
 CC=$6
+LD=$7
 
 vecho() { [ "${quiet}" = "silent_" ] || echo "$@" ; }
 
@@ -61,7 +62,10 @@
   printf '#define LINUX_COMPILE_BY "%s"\n' "$LINUX_COMPILE_BY"
   echo \#define LINUX_COMPILE_HOST \"$LINUX_COMPILE_HOST\"
 
-  echo \#define LINUX_COMPILER \"`$CC -v 2>&1 | grep ' version ' | sed 's/[[:space:]]*$//'`\"
+  CC_VERSION=$($CC -v 2>&1 | grep ' version ' | sed 's/[[:space:]]*$//')
+  LD_VERSION=$($LD -v | head -n1 | sed 's/(compatible with [^)]*)//' \
+		      | sed 's/[[:space:]]*$//')
+  printf '#define LINUX_COMPILER "%s"\n' "$CC_VERSION, $LD_VERSION"
 } > .tmpcompile
 
 # Only replace the real compile.h if the new one is different,
diff --git a/scripts/mod/.gitignore b/scripts/mod/.gitignore
index 3bd11b6..07e4a39 100644
--- a/scripts/mod/.gitignore
+++ b/scripts/mod/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 elfconfig.h
 mk_elfconfig
 modpost
diff --git a/scripts/mod/devicetable-offsets.c b/scripts/mod/devicetable-offsets.c
index d3c237b..010be8b 100644
--- a/scripts/mod/devicetable-offsets.c
+++ b/scripts/mod/devicetable-offsets.c
@@ -238,5 +238,8 @@ int main(void)
 	DEVID(wmi_device_id);
 	DEVID_FIELD(wmi_device_id, guid_string);
 
+	DEVID(mhi_device_id);
+	DEVID_FIELD(mhi_device_id, chan);
+
 	return 0;
 }
diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c
index f81cbe0..02d5d79 100644
--- a/scripts/mod/file2alias.c
+++ b/scripts/mod/file2alias.c
@@ -1353,6 +1353,15 @@ static int do_wmi_entry(const char *filename, void *symval, char *alias)
 	return 1;
 }
 
+/* Looks like: mhi:S */
+static int do_mhi_entry(const char *filename, void *symval, char *alias)
+{
+	DEF_FIELD_ADDR(symval, mhi_device_id, chan);
+	sprintf(alias, MHI_DEVICE_MODALIAS_FMT, *chan);
+
+	return 1;
+}
+
 /* Does namelen bytes of name exactly match the symbol? */
 static bool sym_is(const char *name, unsigned namelen, const char *symbol)
 {
@@ -1426,6 +1435,7 @@ static const struct devtable devtable[] = {
 	{"typec", SIZE_typec_device_id, do_typec_entry},
 	{"tee", SIZE_tee_client_device_id, do_tee_entry},
 	{"wmi", SIZE_wmi_device_id, do_wmi_entry},
+	{"mhi", SIZE_mhi_device_id, do_mhi_entry},
 };
 
 /* Create MODULE_ALIAS() statements.
diff --git a/scripts/selinux/genheaders/.gitignore b/scripts/selinux/genheaders/.gitignore
index 4c0b646..5fcadd3 100644
--- a/scripts/selinux/genheaders/.gitignore
+++ b/scripts/selinux/genheaders/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 genheaders
diff --git a/scripts/selinux/mdp/.gitignore b/scripts/selinux/mdp/.gitignore
index 654546d..a748228 100644
--- a/scripts/selinux/mdp/.gitignore
+++ b/scripts/selinux/mdp/.gitignore
@@ -1,2 +1,2 @@
-# Generated file
+# SPDX-License-Identifier: GPL-2.0-only
 mdp
diff --git a/scripts/ver_linux b/scripts/ver_linux
index 85005d6..0968a30 100755
--- a/scripts/ver_linux
+++ b/scripts/ver_linux
@@ -14,6 +14,8 @@
 	printf("\n")
 
 	vernum = "[0-9]+([.]?[0-9]+)+"
+	libc = "libc[.]so[.][0-9]+$"
+	libcpp = "(libg|stdc)[+]+[.]so[.][0-9]+$"
 
 	printversion("GNU C", version("gcc -dumpversion"))
 	printversion("GNU Make", version("make --version"))
@@ -35,26 +37,14 @@
 	printversion("Bison", version("bison --version"))
 	printversion("Flex", version("flex --version"))
 
-	while (getline <"/proc/self/maps" > 0) {
-		if (/libc.*\.so$/) {
-			n = split($0, procmaps, "/")
-			if (match(procmaps[n], vernum)) {
-				ver = substr(procmaps[n], RSTART, RLENGTH)
-				printversion("Linux C Library", ver)
-				break
-			}
-		}
+	while ("ldconfig -p 2>/dev/null" | getline > 0) {
+		if ($NF ~ libc && !seen[ver = version("readlink " $NF)]++)
+			printversion("Linux C Library", ver)
+		else if ($NF ~ libcpp && !seen[ver = version("readlink " $NF)]++)
+			printversion("Linux C++ Library", ver)
 	}
 
 	printversion("Dynamic linker (ldd)", version("ldd --version"))
-
-	while ("ldconfig -p 2>/dev/null" | getline > 0) {
-		if (/(libg|stdc)[+]+\.so/) {
-			libcpp = $NF
-			break
-		}
-	}
-	printversion("Linux C++ Library", version("readlink " libcpp))
 	printversion("Procps", version("ps --version"))
 	printversion("Net-tools", version("ifconfig --version"))
 	printversion("Kbd", version("loadkeys -V"))
diff --git a/security/apparmor/.gitignore b/security/apparmor/.gitignore
index d5b291e..6d1eb1c 100644
--- a/security/apparmor/.gitignore
+++ b/security/apparmor/.gitignore
@@ -1,6 +1,4 @@
-#
-# Generated include files
-#
+# SPDX-License-Identifier: GPL-2.0-only
 net_names.h
 capability_names.h
 rlim_names.h
diff --git a/security/keys/big_key.c b/security/keys/big_key.c
index 001abe5..82008f9 100644
--- a/security/keys/big_key.c
+++ b/security/keys/big_key.c
@@ -352,7 +352,7 @@ void big_key_describe(const struct key *key, struct seq_file *m)
  * read the key data
  * - the key's semaphore is read-locked
  */
-long big_key_read(const struct key *key, char __user *buffer, size_t buflen)
+long big_key_read(const struct key *key, char *buffer, size_t buflen)
 {
 	size_t datalen = (size_t)key->payload.data[big_key_len];
 	long ret;
@@ -391,9 +391,8 @@ long big_key_read(const struct key *key, char __user *buffer, size_t buflen)
 
 		ret = datalen;
 
-		/* copy decrypted data to user */
-		if (copy_to_user(buffer, buf->virt, datalen) != 0)
-			ret = -EFAULT;
+		/* copy out decrypted data */
+		memcpy(buffer, buf->virt, datalen);
 
 err_fput:
 		fput(file);
@@ -401,9 +400,7 @@ long big_key_read(const struct key *key, char __user *buffer, size_t buflen)
 		big_key_free_buffer(buf);
 	} else {
 		ret = datalen;
-		if (copy_to_user(buffer, key->payload.data[big_key_data],
-				 datalen) != 0)
-			ret = -EFAULT;
+		memcpy(buffer, key->payload.data[big_key_data], datalen);
 	}
 
 	return ret;
diff --git a/security/keys/encrypted-keys/encrypted.c b/security/keys/encrypted-keys/encrypted.c
index 60720f5..f6797ba 100644
--- a/security/keys/encrypted-keys/encrypted.c
+++ b/security/keys/encrypted-keys/encrypted.c
@@ -902,14 +902,14 @@ static int encrypted_update(struct key *key, struct key_preparsed_payload *prep)
 }
 
 /*
- * encrypted_read - format and copy the encrypted data to userspace
+ * encrypted_read - format and copy out the encrypted data
  *
  * The resulting datablob format is:
  * <master-key name> <decrypted data length> <encrypted iv> <encrypted data>
  *
  * On success, return to userspace the encrypted key datablob size.
  */
-static long encrypted_read(const struct key *key, char __user *buffer,
+static long encrypted_read(const struct key *key, char *buffer,
 			   size_t buflen)
 {
 	struct encrypted_key_payload *epayload;
@@ -957,8 +957,7 @@ static long encrypted_read(const struct key *key, char __user *buffer,
 	key_put(mkey);
 	memzero_explicit(derived_key, sizeof(derived_key));
 
-	if (copy_to_user(buffer, ascii_buf, asciiblob_len) != 0)
-		ret = -EFAULT;
+	memcpy(buffer, ascii_buf, asciiblob_len);
 	kzfree(ascii_buf);
 
 	return asciiblob_len;
diff --git a/security/keys/internal.h b/security/keys/internal.h
index ba3e2da..6d0ca48 100644
--- a/security/keys/internal.h
+++ b/security/keys/internal.h
@@ -16,6 +16,8 @@
 #include <linux/keyctl.h>
 #include <linux/refcount.h>
 #include <linux/compat.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
 
 struct iovec;
 
@@ -349,4 +351,14 @@ static inline void key_check(const struct key *key)
 
 #endif
 
+/*
+ * Helper function to clear and free a kvmalloc'ed memory object.
+ */
+static inline void __kvzfree(const void *addr, size_t len)
+{
+	if (addr) {
+		memset((void *)addr, 0, len);
+		kvfree(addr);
+	}
+}
 #endif /* _INTERNAL_H */
diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c
index d1a3dea..5e01192 100644
--- a/security/keys/keyctl.c
+++ b/security/keys/keyctl.c
@@ -339,7 +339,7 @@ long keyctl_update_key(key_serial_t id,
 	payload = NULL;
 	if (plen) {
 		ret = -ENOMEM;
-		payload = kmalloc(plen, GFP_KERNEL);
+		payload = kvmalloc(plen, GFP_KERNEL);
 		if (!payload)
 			goto error;
 
@@ -360,7 +360,7 @@ long keyctl_update_key(key_serial_t id,
 
 	key_ref_put(key_ref);
 error2:
-	kzfree(payload);
+	__kvzfree(payload, plen);
 error:
 	return ret;
 }
@@ -798,6 +798,21 @@ long keyctl_keyring_search(key_serial_t ringid,
 }
 
 /*
+ * Call the read method
+ */
+static long __keyctl_read_key(struct key *key, char *buffer, size_t buflen)
+{
+	long ret;
+
+	down_read(&key->sem);
+	ret = key_validate(key);
+	if (ret == 0)
+		ret = key->type->read(key, buffer, buflen);
+	up_read(&key->sem);
+	return ret;
+}
+
+/*
  * Read a key's payload.
  *
  * The key must either grant the caller Read permission, or it must grant the
@@ -812,26 +827,28 @@ long keyctl_read_key(key_serial_t keyid, char __user *buffer, size_t buflen)
 	struct key *key;
 	key_ref_t key_ref;
 	long ret;
+	char *key_data = NULL;
+	size_t key_data_len;
 
 	/* find the key first */
 	key_ref = lookup_user_key(keyid, 0, 0);
 	if (IS_ERR(key_ref)) {
 		ret = -ENOKEY;
-		goto error;
+		goto out;
 	}
 
 	key = key_ref_to_ptr(key_ref);
 
 	ret = key_read_state(key);
 	if (ret < 0)
-		goto error2; /* Negatively instantiated */
+		goto key_put_out; /* Negatively instantiated */
 
 	/* see if we can read it directly */
 	ret = key_permission(key_ref, KEY_NEED_READ);
 	if (ret == 0)
 		goto can_read_key;
 	if (ret != -EACCES)
-		goto error2;
+		goto key_put_out;
 
 	/* we can't; see if it's searchable from this process's keyrings
 	 * - we automatically take account of the fact that it may be
@@ -839,26 +856,78 @@ long keyctl_read_key(key_serial_t keyid, char __user *buffer, size_t buflen)
 	 */
 	if (!is_key_possessed(key_ref)) {
 		ret = -EACCES;
-		goto error2;
+		goto key_put_out;
 	}
 
 	/* the key is probably readable - now try to read it */
 can_read_key:
-	ret = -EOPNOTSUPP;
-	if (key->type->read) {
-		/* Read the data with the semaphore held (since we might sleep)
-		 * to protect against the key being updated or revoked.
-		 */
-		down_read(&key->sem);
-		ret = key_validate(key);
-		if (ret == 0)
-			ret = key->type->read(key, buffer, buflen);
-		up_read(&key->sem);
+	if (!key->type->read) {
+		ret = -EOPNOTSUPP;
+		goto key_put_out;
 	}
 
-error2:
+	if (!buffer || !buflen) {
+		/* Get the key length from the read method */
+		ret = __keyctl_read_key(key, NULL, 0);
+		goto key_put_out;
+	}
+
+	/*
+	 * Read the data with the semaphore held (since we might sleep)
+	 * to protect against the key being updated or revoked.
+	 *
+	 * Allocating a temporary buffer to hold the keys before
+	 * transferring them to user buffer to avoid potential
+	 * deadlock involving page fault and mmap_sem.
+	 *
+	 * key_data_len = (buflen <= PAGE_SIZE)
+	 *		? buflen : actual length of key data
+	 *
+	 * This prevents allocating arbitrary large buffer which can
+	 * be much larger than the actual key length. In the latter case,
+	 * at least 2 passes of this loop is required.
+	 */
+	key_data_len = (buflen <= PAGE_SIZE) ? buflen : 0;
+	for (;;) {
+		if (key_data_len) {
+			key_data = kvmalloc(key_data_len, GFP_KERNEL);
+			if (!key_data) {
+				ret = -ENOMEM;
+				goto key_put_out;
+			}
+		}
+
+		ret = __keyctl_read_key(key, key_data, key_data_len);
+
+		/*
+		 * Read methods will just return the required length without
+		 * any copying if the provided length isn't large enough.
+		 */
+		if (ret <= 0 || ret > buflen)
+			break;
+
+		/*
+		 * The key may change (unlikely) in between 2 consecutive
+		 * __keyctl_read_key() calls. In this case, we reallocate
+		 * a larger buffer and redo the key read when
+		 * key_data_len < ret <= buflen.
+		 */
+		if (ret > key_data_len) {
+			if (unlikely(key_data))
+				__kvzfree(key_data, key_data_len);
+			key_data_len = ret;
+			continue;	/* Allocate buffer */
+		}
+
+		if (copy_to_user(buffer, key_data, ret))
+			ret = -EFAULT;
+		break;
+	}
+	__kvzfree(key_data, key_data_len);
+
+key_put_out:
 	key_put(key);
-error:
+out:
 	return ret;
 }
 
diff --git a/security/keys/keyring.c b/security/keys/keyring.c
index febf36c..5ca620d 100644
--- a/security/keys/keyring.c
+++ b/security/keys/keyring.c
@@ -459,7 +459,6 @@ static int keyring_read_iterator(const void *object, void *data)
 {
 	struct keyring_read_iterator_context *ctx = data;
 	const struct key *key = keyring_ptr_to_key(object);
-	int ret;
 
 	kenter("{%s,%d},,{%zu/%zu}",
 	       key->type->name, key->serial, ctx->count, ctx->buflen);
@@ -467,10 +466,7 @@ static int keyring_read_iterator(const void *object, void *data)
 	if (ctx->count >= ctx->buflen)
 		return 1;
 
-	ret = put_user(key->serial, ctx->buffer);
-	if (ret < 0)
-		return ret;
-	ctx->buffer++;
+	*ctx->buffer++ = key->serial;
 	ctx->count += sizeof(key->serial);
 	return 0;
 }
diff --git a/security/keys/proc.c b/security/keys/proc.c
index 415f3f1..d0cde66 100644
--- a/security/keys/proc.c
+++ b/security/keys/proc.c
@@ -139,6 +139,8 @@ static void *proc_keys_next(struct seq_file *p, void *v, loff_t *_pos)
 	n = key_serial_next(p, v);
 	if (n)
 		*_pos = key_node_serial(n);
+	else
+		(*_pos)++;
 	return n;
 }
 
diff --git a/security/keys/request_key_auth.c b/security/keys/request_key_auth.c
index ecba39c..41e9735 100644
--- a/security/keys/request_key_auth.c
+++ b/security/keys/request_key_auth.c
@@ -22,7 +22,7 @@ static int request_key_auth_instantiate(struct key *,
 static void request_key_auth_describe(const struct key *, struct seq_file *);
 static void request_key_auth_revoke(struct key *);
 static void request_key_auth_destroy(struct key *);
-static long request_key_auth_read(const struct key *, char __user *, size_t);
+static long request_key_auth_read(const struct key *, char *, size_t);
 
 /*
  * The request-key authorisation key type definition.
@@ -80,7 +80,7 @@ static void request_key_auth_describe(const struct key *key,
  * - the key's semaphore is read-locked
  */
 static long request_key_auth_read(const struct key *key,
-				  char __user *buffer, size_t buflen)
+				  char *buffer, size_t buflen)
 {
 	struct request_key_auth *rka = dereference_key_locked(key);
 	size_t datalen;
@@ -97,8 +97,7 @@ static long request_key_auth_read(const struct key *key,
 		if (buflen > datalen)
 			buflen = datalen;
 
-		if (copy_to_user(buffer, rka->callout_info, buflen) != 0)
-			ret = -EFAULT;
+		memcpy(buffer, rka->callout_info, buflen);
 	}
 
 	return ret;
diff --git a/security/keys/trusted-keys/trusted_tpm1.c b/security/keys/trusted-keys/trusted_tpm1.c
index d2c5ec1..8001ab0 100644
--- a/security/keys/trusted-keys/trusted_tpm1.c
+++ b/security/keys/trusted-keys/trusted_tpm1.c
@@ -1130,11 +1130,10 @@ static int trusted_update(struct key *key, struct key_preparsed_payload *prep)
  * trusted_read - copy the sealed blob data to userspace in hex.
  * On success, return to userspace the trusted key datablob size.
  */
-static long trusted_read(const struct key *key, char __user *buffer,
+static long trusted_read(const struct key *key, char *buffer,
 			 size_t buflen)
 {
 	const struct trusted_key_payload *p;
-	char *ascii_buf;
 	char *bufp;
 	int i;
 
@@ -1143,18 +1142,9 @@ static long trusted_read(const struct key *key, char __user *buffer,
 		return -EINVAL;
 
 	if (buffer && buflen >= 2 * p->blob_len) {
-		ascii_buf = kmalloc_array(2, p->blob_len, GFP_KERNEL);
-		if (!ascii_buf)
-			return -ENOMEM;
-
-		bufp = ascii_buf;
+		bufp = buffer;
 		for (i = 0; i < p->blob_len; i++)
 			bufp = hex_byte_pack(bufp, p->blob[i]);
-		if (copy_to_user(buffer, ascii_buf, 2 * p->blob_len) != 0) {
-			kzfree(ascii_buf);
-			return -EFAULT;
-		}
-		kzfree(ascii_buf);
 	}
 	return 2 * p->blob_len;
 }
diff --git a/security/keys/user_defined.c b/security/keys/user_defined.c
index 6f12de4..07d4287 100644
--- a/security/keys/user_defined.c
+++ b/security/keys/user_defined.c
@@ -168,7 +168,7 @@ EXPORT_SYMBOL_GPL(user_describe);
  * read the key data
  * - the key's semaphore is read-locked
  */
-long user_read(const struct key *key, char __user *buffer, size_t buflen)
+long user_read(const struct key *key, char *buffer, size_t buflen)
 {
 	const struct user_key_payload *upayload;
 	long ret;
@@ -181,8 +181,7 @@ long user_read(const struct key *key, char __user *buffer, size_t buflen)
 		if (buflen > upayload->datalen)
 			buflen = upayload->datalen;
 
-		if (copy_to_user(buffer, upayload->data, buflen) != 0)
-			ret = -EFAULT;
+		memcpy(buffer, upayload->data, buflen);
 	}
 
 	return ret;
diff --git a/security/selinux/.gitignore b/security/selinux/.gitignore
index 2e5040a..168fae1 100644
--- a/security/selinux/.gitignore
+++ b/security/selinux/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 av_permissions.h
 flask.h
diff --git a/security/selinux/ss/policydb.c b/security/selinux/ss/policydb.c
index 70ecdc7..c21b922e 100644
--- a/security/selinux/ss/policydb.c
+++ b/security/selinux/ss/policydb.c
@@ -1035,14 +1035,14 @@ static int str_read(char **strp, gfp_t flags, void *fp, u32 len)
 	if (!str)
 		return -ENOMEM;
 
-	/* it's expected the caller should free the str */
-	*strp = str;
-
 	rc = next_entry(str, fp, len);
-	if (rc)
+	if (rc) {
+		kfree(str);
 		return rc;
+	}
 
 	str[len] = '\0';
+	*strp = str;
 	return 0;
 }
 
diff --git a/security/tomoyo/.gitignore b/security/tomoyo/.gitignore
index dc0f220..9f300cd 100644
--- a/security/tomoyo/.gitignore
+++ b/security/tomoyo/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 builtin-policy.h
 policy/*.conf
diff --git a/sound/arm/pxa2xx-pcm-lib.c b/sound/arm/pxa2xx-pcm-lib.c
index a86c95d..e81083e1 100644
--- a/sound/arm/pxa2xx-pcm-lib.c
+++ b/sound/arm/pxa2xx-pcm-lib.c
@@ -38,7 +38,7 @@ int pxa2xx_pcm_hw_params(struct snd_pcm_substream *substream,
 	struct dma_slave_config config;
 	int ret;
 
-	dma_params = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+	dma_params = snd_soc_dai_get_dma_data(asoc_rtd_to_cpu(rtd, 0), substream);
 	if (!dma_params)
 		return 0;
 
@@ -47,7 +47,7 @@ int pxa2xx_pcm_hw_params(struct snd_pcm_substream *substream,
 		return ret;
 
 	snd_dmaengine_pcm_set_config_from_dai_data(substream,
-			snd_soc_dai_get_dma_data(rtd->cpu_dai, substream),
+			snd_soc_dai_get_dma_data(asoc_rtd_to_cpu(rtd, 0), substream),
 			&config);
 
 	ret = dmaengine_slave_config(chan, &config);
@@ -95,7 +95,7 @@ int pxa2xx_pcm_open(struct snd_pcm_substream *substream)
 
 	runtime->hw = pxa2xx_pcm_hardware;
 
-	dma_params = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+	dma_params = snd_soc_dai_get_dma_data(asoc_rtd_to_cpu(rtd, 0), substream);
 	if (!dma_params)
 		return 0;
 
@@ -120,7 +120,7 @@ int pxa2xx_pcm_open(struct snd_pcm_substream *substream)
 		return ret;
 
 	return snd_dmaengine_pcm_open(
-		substream, dma_request_slave_channel(rtd->cpu_dai->dev,
+		substream, dma_request_slave_channel(asoc_rtd_to_cpu(rtd, 0)->dev,
 						     dma_params->chan_name));
 }
 EXPORT_SYMBOL(pxa2xx_pcm_open);
diff --git a/sound/core/compress_offload.c b/sound/core/compress_offload.c
index 9de1c9a..509290f 100644
--- a/sound/core/compress_offload.c
+++ b/sound/core/compress_offload.c
@@ -488,6 +488,48 @@ snd_compr_get_codec_caps(struct snd_compr_stream *stream, unsigned long arg)
 }
 #endif /* !COMPR_CODEC_CAPS_OVERFLOW */
 
+int snd_compr_malloc_pages(struct snd_compr_stream *stream, size_t size)
+{
+	struct snd_dma_buffer *dmab;
+	int ret;
+
+	if (snd_BUG_ON(!(stream) || !(stream)->runtime))
+		return -EINVAL;
+	dmab = kzalloc(sizeof(*dmab), GFP_KERNEL);
+	if (!dmab)
+		return -ENOMEM;
+	dmab->dev = stream->dma_buffer.dev;
+	ret = snd_dma_alloc_pages(dmab->dev.type, dmab->dev.dev, size, dmab);
+	if (ret < 0) {
+		kfree(dmab);
+		return ret;
+	}
+
+	snd_compr_set_runtime_buffer(stream, dmab);
+	stream->runtime->dma_bytes = size;
+	return 1;
+}
+EXPORT_SYMBOL(snd_compr_malloc_pages);
+
+int snd_compr_free_pages(struct snd_compr_stream *stream)
+{
+	struct snd_compr_runtime *runtime = stream->runtime;
+
+	if (snd_BUG_ON(!(stream) || !(stream)->runtime))
+		return -EINVAL;
+	if (runtime->dma_area == NULL)
+		return 0;
+	if (runtime->dma_buffer_p != &stream->dma_buffer) {
+		/* It's a newly allocated buffer. Release it now. */
+		snd_dma_free_pages(runtime->dma_buffer_p);
+		kfree(runtime->dma_buffer_p);
+	}
+
+	snd_compr_set_runtime_buffer(stream, NULL);
+	return 0;
+}
+EXPORT_SYMBOL(snd_compr_free_pages);
+
 /* revisit this with snd_pcm_preallocate_xxx */
 static int snd_compr_allocate_buffer(struct snd_compr_stream *stream,
 		struct snd_compr_params *params)
diff --git a/sound/core/device.c b/sound/core/device.c
index cdc5af5..bf0b04a 100644
--- a/sound/core/device.c
+++ b/sound/core/device.c
@@ -237,3 +237,24 @@ void snd_device_free_all(struct snd_card *card)
 	list_for_each_entry_safe_reverse(dev, next, &card->devices, list)
 		__snd_device_free(dev);
 }
+
+/**
+ * snd_device_get_state - Get the current state of the given device
+ * @card: the card instance
+ * @device_data: the data pointer to release
+ *
+ * Returns the current state of the given device object.  For the valid
+ * device, either @SNDRV_DEV_BUILD, @SNDRV_DEV_REGISTERED or
+ * @SNDRV_DEV_DISCONNECTED is returned.
+ * Or for a non-existing device, -1 is returned as an error.
+ */
+int snd_device_get_state(struct snd_card *card, void *device_data)
+{
+	struct snd_device *dev;
+
+	dev = look_for_dev(card, device_data);
+	if (dev)
+		return dev->state;
+	return -1;
+}
+EXPORT_SYMBOL_GPL(snd_device_get_state);
diff --git a/sound/core/info.c b/sound/core/info.c
index ca87ae4..8c6bc52 100644
--- a/sound/core/info.c
+++ b/sound/core/info.c
@@ -604,7 +604,7 @@ int snd_info_card_free(struct snd_card *card)
  */
 int snd_info_get_line(struct snd_info_buffer *buffer, char *line, int len)
 {
-	int c = -1;
+	int c;
 
 	if (snd_BUG_ON(!buffer || !buffer->buffer))
 		return 1;
diff --git a/sound/core/oss/pcm_oss.c b/sound/core/oss/pcm_oss.c
index 13db777..930def8 100644
--- a/sound/core/oss/pcm_oss.c
+++ b/sound/core/oss/pcm_oss.c
@@ -884,20 +884,17 @@ static int snd_pcm_oss_change_params_locked(struct snd_pcm_substream *substream)
 		sformat = snd_pcm_plug_slave_format(format, sformat_mask);
 
 	if ((__force int)sformat < 0 ||
-	    !snd_mask_test(sformat_mask, (__force int)sformat)) {
-		for (sformat = (__force snd_pcm_format_t)0;
-		     (__force int)sformat <= (__force int)SNDRV_PCM_FORMAT_LAST;
-		     sformat = (__force snd_pcm_format_t)((__force int)sformat + 1)) {
-			if (snd_mask_test(sformat_mask, (__force int)sformat) &&
+	    !snd_mask_test_format(sformat_mask, sformat)) {
+		pcm_for_each_format(sformat) {
+			if (snd_mask_test_format(sformat_mask, sformat) &&
 			    snd_pcm_oss_format_to(sformat) >= 0)
-				break;
+				goto format_found;
 		}
-		if ((__force int)sformat > (__force int)SNDRV_PCM_FORMAT_LAST) {
-			pcm_dbg(substream->pcm, "Cannot find a format!!!\n");
-			err = -EINVAL;
-			goto failure;
-		}
+		pcm_dbg(substream->pcm, "Cannot find a format!!!\n");
+		err = -EINVAL;
+		goto failure;
 	}
+ format_found:
 	err = _snd_pcm_hw_param_set(sparams, SNDRV_PCM_HW_PARAM_FORMAT, (__force int)sformat, 0);
 	if (err < 0)
 		goto failure;
@@ -1220,8 +1217,10 @@ snd_pcm_sframes_t snd_pcm_oss_write3(struct snd_pcm_substream *substream, const
 			if (ret < 0)
 				break;
 		}
+		mutex_unlock(&runtime->oss.params_lock);
 		ret = __snd_pcm_lib_xfer(substream, (void *)ptr, true,
 					 frames, in_kernel);
+		mutex_lock(&runtime->oss.params_lock);
 		if (ret != -EPIPE && ret != -ESTRPIPE)
 			break;
 		/* test, if we can't store new data, because the stream */
@@ -1257,8 +1256,10 @@ snd_pcm_sframes_t snd_pcm_oss_read3(struct snd_pcm_substream *substream, char *p
 		ret = snd_pcm_oss_capture_position_fixup(substream, &delay);
 		if (ret < 0)
 			break;
+		mutex_unlock(&runtime->oss.params_lock);
 		ret = __snd_pcm_lib_xfer(substream, (void *)ptr, true,
 					 frames, in_kernel);
+		mutex_lock(&runtime->oss.params_lock);
 		if (ret == -EPIPE) {
 			if (runtime->status->state == SNDRV_PCM_STATE_DRAINING) {
 				ret = snd_pcm_kernel_ioctl(substream, SNDRV_PCM_IOCTL_DROP, NULL);
diff --git a/sound/core/oss/pcm_plugin.c b/sound/core/oss/pcm_plugin.c
index 752d078..59d62f0 100644
--- a/sound/core/oss/pcm_plugin.c
+++ b/sound/core/oss/pcm_plugin.c
@@ -196,82 +196,76 @@ int snd_pcm_plugin_free(struct snd_pcm_plugin *plugin)
 	return 0;
 }
 
+static snd_pcm_sframes_t calc_dst_frames(struct snd_pcm_substream *plug,
+					 snd_pcm_sframes_t frames,
+					 bool check_size)
+{
+	struct snd_pcm_plugin *plugin, *plugin_next;
+
+	plugin = snd_pcm_plug_first(plug);
+	while (plugin && frames > 0) {
+		plugin_next = plugin->next;
+		if (plugin->dst_frames) {
+			frames = plugin->dst_frames(plugin, frames);
+			if (frames < 0)
+				return frames;
+		}
+		if (check_size && frames > plugin->buf_frames)
+			frames = plugin->buf_frames;
+		plugin = plugin_next;
+	}
+	return frames;
+}
+
+static snd_pcm_sframes_t calc_src_frames(struct snd_pcm_substream *plug,
+					 snd_pcm_sframes_t frames,
+					 bool check_size)
+{
+	struct snd_pcm_plugin *plugin, *plugin_prev;
+
+	plugin = snd_pcm_plug_last(plug);
+	while (plugin && frames > 0) {
+		if (check_size && frames > plugin->buf_frames)
+			frames = plugin->buf_frames;
+		plugin_prev = plugin->prev;
+		if (plugin->src_frames) {
+			frames = plugin->src_frames(plugin, frames);
+			if (frames < 0)
+				return frames;
+		}
+		plugin = plugin_prev;
+	}
+	return frames;
+}
+
 snd_pcm_sframes_t snd_pcm_plug_client_size(struct snd_pcm_substream *plug, snd_pcm_uframes_t drv_frames)
 {
-	struct snd_pcm_plugin *plugin, *plugin_prev, *plugin_next;
-	int stream;
-
 	if (snd_BUG_ON(!plug))
 		return -ENXIO;
-	if (drv_frames == 0)
-		return 0;
-	stream = snd_pcm_plug_stream(plug);
-	if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
-		plugin = snd_pcm_plug_last(plug);
-		while (plugin && drv_frames > 0) {
-			if (drv_frames > plugin->buf_frames)
-				drv_frames = plugin->buf_frames;
-			plugin_prev = plugin->prev;
-			if (plugin->src_frames)
-				drv_frames = plugin->src_frames(plugin, drv_frames);
-			plugin = plugin_prev;
-		}
-	} else if (stream == SNDRV_PCM_STREAM_CAPTURE) {
-		plugin = snd_pcm_plug_first(plug);
-		while (plugin && drv_frames > 0) {
-			plugin_next = plugin->next;
-			if (plugin->dst_frames)
-				drv_frames = plugin->dst_frames(plugin, drv_frames);
-			if (drv_frames > plugin->buf_frames)
-				drv_frames = plugin->buf_frames;
-			plugin = plugin_next;
-		}
-	} else
+	switch (snd_pcm_plug_stream(plug)) {
+	case SNDRV_PCM_STREAM_PLAYBACK:
+		return calc_src_frames(plug, drv_frames, false);
+	case SNDRV_PCM_STREAM_CAPTURE:
+		return calc_dst_frames(plug, drv_frames, false);
+	default:
 		snd_BUG();
-	return drv_frames;
+		return -EINVAL;
+	}
 }
 
 snd_pcm_sframes_t snd_pcm_plug_slave_size(struct snd_pcm_substream *plug, snd_pcm_uframes_t clt_frames)
 {
-	struct snd_pcm_plugin *plugin, *plugin_prev, *plugin_next;
-	snd_pcm_sframes_t frames;
-	int stream;
-	
 	if (snd_BUG_ON(!plug))
 		return -ENXIO;
-	if (clt_frames == 0)
-		return 0;
-	frames = clt_frames;
-	stream = snd_pcm_plug_stream(plug);
-	if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
-		plugin = snd_pcm_plug_first(plug);
-		while (plugin && frames > 0) {
-			plugin_next = plugin->next;
-			if (plugin->dst_frames) {
-				frames = plugin->dst_frames(plugin, frames);
-				if (frames < 0)
-					return frames;
-			}
-			if (frames > plugin->buf_frames)
-				frames = plugin->buf_frames;
-			plugin = plugin_next;
-		}
-	} else if (stream == SNDRV_PCM_STREAM_CAPTURE) {
-		plugin = snd_pcm_plug_last(plug);
-		while (plugin) {
-			if (frames > plugin->buf_frames)
-				frames = plugin->buf_frames;
-			plugin_prev = plugin->prev;
-			if (plugin->src_frames) {
-				frames = plugin->src_frames(plugin, frames);
-				if (frames < 0)
-					return frames;
-			}
-			plugin = plugin_prev;
-		}
-	} else
+	switch (snd_pcm_plug_stream(plug)) {
+	case SNDRV_PCM_STREAM_PLAYBACK:
+		return calc_dst_frames(plug, clt_frames, false);
+	case SNDRV_PCM_STREAM_CAPTURE:
+		return calc_src_frames(plug, clt_frames, false);
+	default:
 		snd_BUG();
-	return frames;
+		return -EINVAL;
+	}
 }
 
 static int snd_pcm_plug_formats(const struct snd_mask *mask,
@@ -630,7 +624,7 @@ snd_pcm_sframes_t snd_pcm_plug_write_transfer(struct snd_pcm_substream *plug, st
 		src_channels = dst_channels;
 		plugin = next;
 	}
-	return snd_pcm_plug_client_size(plug, frames);
+	return calc_src_frames(plug, frames, true);
 }
 
 snd_pcm_sframes_t snd_pcm_plug_read_transfer(struct snd_pcm_substream *plug, struct snd_pcm_plugin_channel *dst_channels_final, snd_pcm_uframes_t size)
@@ -640,7 +634,7 @@ snd_pcm_sframes_t snd_pcm_plug_read_transfer(struct snd_pcm_substream *plug, str
 	snd_pcm_sframes_t frames = size;
 	int err;
 
-	frames = snd_pcm_plug_slave_size(plug, frames);
+	frames = calc_src_frames(plug, frames, true);
 	if (frames < 0)
 		return frames;
 
diff --git a/sound/core/oss/rate.c b/sound/core/oss/rate.c
index 7cd09ce..d381f4c 100644
--- a/sound/core/oss/rate.c
+++ b/sound/core/oss/rate.c
@@ -47,7 +47,7 @@ struct rate_priv {
 	unsigned int pos;
 	rate_f func;
 	snd_pcm_sframes_t old_src_frames, old_dst_frames;
-	struct rate_channel channels[0];
+	struct rate_channel channels[];
 };
 
 static void rate_init(struct snd_pcm_plugin *plugin)
diff --git a/sound/core/pcm.c b/sound/core/pcm.c
index a141a30..b6d2331 100644
--- a/sound/core/pcm.c
+++ b/sound/core/pcm.c
@@ -1019,7 +1019,7 @@ static ssize_t show_pcm_class(struct device *dev,
 		str = "none";
 	else
 		str = strs[pcm->dev_class];
-        return snprintf(buf, PAGE_SIZE, "%s\n", str);
+	return sprintf(buf, "%s\n", str);
 }
 
 static DEVICE_ATTR(pcm_class, 0444, show_pcm_class, NULL);
diff --git a/sound/core/pcm_dmaengine.c b/sound/core/pcm_dmaengine.c
index 5749a8a..4d059ff 100644
--- a/sound/core/pcm_dmaengine.c
+++ b/sound/core/pcm_dmaengine.c
@@ -240,6 +240,7 @@ EXPORT_SYMBOL_GPL(snd_dmaengine_pcm_pointer_no_residue);
 snd_pcm_uframes_t snd_dmaengine_pcm_pointer(struct snd_pcm_substream *substream)
 {
 	struct dmaengine_pcm_runtime_data *prtd = substream_to_prtd(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct dma_tx_state state;
 	enum dma_status status;
 	unsigned int buf_size;
@@ -250,9 +251,12 @@ snd_pcm_uframes_t snd_dmaengine_pcm_pointer(struct snd_pcm_substream *substream)
 		buf_size = snd_pcm_lib_buffer_bytes(substream);
 		if (state.residue > 0 && state.residue <= buf_size)
 			pos = buf_size - state.residue;
+
+		runtime->delay = bytes_to_frames(runtime,
+						 state.in_flight_bytes);
 	}
 
-	return bytes_to_frames(substream->runtime, pos);
+	return bytes_to_frames(runtime, pos);
 }
 EXPORT_SYMBOL_GPL(snd_dmaengine_pcm_pointer);
 
@@ -426,7 +430,7 @@ int snd_dmaengine_pcm_refine_runtime_hwparams(
 		 * default assumption is that it supports 1, 2 and 4 bytes
 		 * widths.
 		 */
-		for (i = SNDRV_PCM_FORMAT_FIRST; i <= SNDRV_PCM_FORMAT_LAST; i++) {
+		pcm_for_each_format(i) {
 			int bits = snd_pcm_format_physical_width(i);
 
 			/*
diff --git a/sound/core/pcm_misc.c b/sound/core/pcm_misc.c
index a6a5415..257d412 100644
--- a/sound/core/pcm_misc.c
+++ b/sound/core/pcm_misc.c
@@ -42,6 +42,11 @@ struct pcm_format_data {
 /* we do lots of calculations on snd_pcm_format_t; shut up sparse */
 #define INT	__force int
 
+static bool valid_format(snd_pcm_format_t format)
+{
+	return (INT)format >= 0 && (INT)format <= (INT)SNDRV_PCM_FORMAT_LAST;
+}
+
 static const struct pcm_format_data pcm_formats[(INT)SNDRV_PCM_FORMAT_LAST+1] = {
 	[SNDRV_PCM_FORMAT_S8] = {
 		.width = 8, .phys = 8, .le = -1, .signd = 1,
@@ -259,7 +264,7 @@ static const struct pcm_format_data pcm_formats[(INT)SNDRV_PCM_FORMAT_LAST+1] =
 int snd_pcm_format_signed(snd_pcm_format_t format)
 {
 	int val;
-	if ((INT)format < 0 || (INT)format > (INT)SNDRV_PCM_FORMAT_LAST)
+	if (!valid_format(format))
 		return -EINVAL;
 	if ((val = pcm_formats[(INT)format].signd) < 0)
 		return -EINVAL;
@@ -307,7 +312,7 @@ EXPORT_SYMBOL(snd_pcm_format_linear);
 int snd_pcm_format_little_endian(snd_pcm_format_t format)
 {
 	int val;
-	if ((INT)format < 0 || (INT)format > (INT)SNDRV_PCM_FORMAT_LAST)
+	if (!valid_format(format))
 		return -EINVAL;
 	if ((val = pcm_formats[(INT)format].le) < 0)
 		return -EINVAL;
@@ -343,7 +348,7 @@ EXPORT_SYMBOL(snd_pcm_format_big_endian);
 int snd_pcm_format_width(snd_pcm_format_t format)
 {
 	int val;
-	if ((INT)format < 0 || (INT)format > (INT)SNDRV_PCM_FORMAT_LAST)
+	if (!valid_format(format))
 		return -EINVAL;
 	if ((val = pcm_formats[(INT)format].width) == 0)
 		return -EINVAL;
@@ -361,7 +366,7 @@ EXPORT_SYMBOL(snd_pcm_format_width);
 int snd_pcm_format_physical_width(snd_pcm_format_t format)
 {
 	int val;
-	if ((INT)format < 0 || (INT)format > (INT)SNDRV_PCM_FORMAT_LAST)
+	if (!valid_format(format))
 		return -EINVAL;
 	if ((val = pcm_formats[(INT)format].phys) == 0)
 		return -EINVAL;
@@ -394,7 +399,7 @@ EXPORT_SYMBOL(snd_pcm_format_size);
  */
 const unsigned char *snd_pcm_format_silence_64(snd_pcm_format_t format)
 {
-	if ((INT)format < 0 || (INT)format > (INT)SNDRV_PCM_FORMAT_LAST)
+	if (!valid_format(format))
 		return NULL;
 	if (! pcm_formats[(INT)format].phys)
 		return NULL;
@@ -418,7 +423,7 @@ int snd_pcm_format_set_silence(snd_pcm_format_t format, void *data, unsigned int
 	unsigned char *dst;
 	const unsigned char *pat;
 
-	if ((INT)format < 0 || (INT)format > (INT)SNDRV_PCM_FORMAT_LAST)
+	if (!valid_format(format))
 		return -EINVAL;
 	if (samples == 0)
 		return 0;
@@ -474,32 +479,32 @@ int snd_pcm_format_set_silence(snd_pcm_format_t format, void *data, unsigned int
 EXPORT_SYMBOL(snd_pcm_format_set_silence);
 
 /**
- * snd_pcm_limit_hw_rates - determine rate_min/rate_max fields
- * @runtime: the runtime instance
+ * snd_pcm_hw_limit_rates - determine rate_min/rate_max fields
+ * @hw: the pcm hw instance
  *
  * Determines the rate_min and rate_max fields from the rates bits of
- * the given runtime->hw.
+ * the given hw.
  *
  * Return: Zero if successful.
  */
-int snd_pcm_limit_hw_rates(struct snd_pcm_runtime *runtime)
+int snd_pcm_hw_limit_rates(struct snd_pcm_hardware *hw)
 {
 	int i;
 	for (i = 0; i < (int)snd_pcm_known_rates.count; i++) {
-		if (runtime->hw.rates & (1 << i)) {
-			runtime->hw.rate_min = snd_pcm_known_rates.list[i];
+		if (hw->rates & (1 << i)) {
+			hw->rate_min = snd_pcm_known_rates.list[i];
 			break;
 		}
 	}
 	for (i = (int)snd_pcm_known_rates.count - 1; i >= 0; i--) {
-		if (runtime->hw.rates & (1 << i)) {
-			runtime->hw.rate_max = snd_pcm_known_rates.list[i];
+		if (hw->rates & (1 << i)) {
+			hw->rate_max = snd_pcm_known_rates.list[i];
 			break;
 		}
 	}
 	return 0;
 }
-EXPORT_SYMBOL(snd_pcm_limit_hw_rates);
+EXPORT_SYMBOL(snd_pcm_hw_limit_rates);
 
 /**
  * snd_pcm_rate_to_rate_bit - converts sample rate to SNDRV_PCM_RATE_xxx bit
diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
index cbdf061..aef8602 100644
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -228,6 +228,9 @@ int snd_pcm_info_user(struct snd_pcm_substream *substream,
 	return err;
 }
 
+/* macro for simplified cast */
+#define PARAM_MASK_BIT(b)	(1U << (__force int)(b))
+
 static bool hw_support_mmap(struct snd_pcm_substream *substream)
 {
 	if (!(substream->runtime->hw.info & SNDRV_PCM_INFO_MMAP))
@@ -257,7 +260,7 @@ static int constrain_mask_params(struct snd_pcm_substream *substream,
 			return -EINVAL;
 
 		/* This parameter is not requested to change by a caller. */
-		if (!(params->rmask & (1 << k)))
+		if (!(params->rmask & PARAM_MASK_BIT(k)))
 			continue;
 
 		if (trace_hw_mask_param_enabled())
@@ -271,7 +274,7 @@ static int constrain_mask_params(struct snd_pcm_substream *substream,
 
 		/* Set corresponding flag so that the caller gets it. */
 		trace_hw_mask_param(substream, k, 0, &old_mask, m);
-		params->cmask |= 1 << k;
+		params->cmask |= PARAM_MASK_BIT(k);
 	}
 
 	return 0;
@@ -293,7 +296,7 @@ static int constrain_interval_params(struct snd_pcm_substream *substream,
 			return -EINVAL;
 
 		/* This parameter is not requested to change by a caller. */
-		if (!(params->rmask & (1 << k)))
+		if (!(params->rmask & PARAM_MASK_BIT(k)))
 			continue;
 
 		if (trace_hw_interval_param_enabled())
@@ -307,7 +310,7 @@ static int constrain_interval_params(struct snd_pcm_substream *substream,
 
 		/* Set corresponding flag so that the caller gets it. */
 		trace_hw_interval_param(substream, k, 0, &old_interval, i);
-		params->cmask |= 1 << k;
+		params->cmask |= PARAM_MASK_BIT(k);
 	}
 
 	return 0;
@@ -349,7 +352,7 @@ static int constrain_params_by_rules(struct snd_pcm_substream *substream,
 	 * have 0 so that the parameters are never changed anymore.
 	 */
 	for (k = 0; k <= SNDRV_PCM_HW_PARAM_LAST_INTERVAL; k++)
-		vstamps[k] = (params->rmask & (1 << k)) ? 1 : 0;
+		vstamps[k] = (params->rmask & PARAM_MASK_BIT(k)) ? 1 : 0;
 
 	/* Due to the above design, actual sequence number starts at 2. */
 	stamp = 2;
@@ -417,7 +420,7 @@ static int constrain_params_by_rules(struct snd_pcm_substream *substream,
 					hw_param_interval(params, r->var));
 			}
 
-			params->cmask |= (1 << r->var);
+			params->cmask |= PARAM_MASK_BIT(r->var);
 			vstamps[r->var] = stamp;
 			again = true;
 		}
@@ -486,9 +489,9 @@ int snd_pcm_hw_refine(struct snd_pcm_substream *substream,
 
 	params->info = 0;
 	params->fifo_size = 0;
-	if (params->rmask & (1 << SNDRV_PCM_HW_PARAM_SAMPLE_BITS))
+	if (params->rmask & PARAM_MASK_BIT(SNDRV_PCM_HW_PARAM_SAMPLE_BITS))
 		params->msbits = 0;
-	if (params->rmask & (1 << SNDRV_PCM_HW_PARAM_RATE)) {
+	if (params->rmask & PARAM_MASK_BIT(SNDRV_PCM_HW_PARAM_RATE)) {
 		params->rate_num = 0;
 		params->rate_den = 0;
 	}
@@ -2293,21 +2296,21 @@ static int snd_pcm_hw_rule_mulkdiv(struct snd_pcm_hw_params *params,
 static int snd_pcm_hw_rule_format(struct snd_pcm_hw_params *params,
 				  struct snd_pcm_hw_rule *rule)
 {
-	unsigned int k;
+	snd_pcm_format_t k;
 	const struct snd_interval *i =
 				hw_param_interval_c(params, rule->deps[0]);
 	struct snd_mask m;
 	struct snd_mask *mask = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT);
 	snd_mask_any(&m);
-	for (k = 0; k <= SNDRV_PCM_FORMAT_LAST; ++k) {
+	pcm_for_each_format(k) {
 		int bits;
-		if (! snd_mask_test(mask, k))
+		if (!snd_mask_test_format(mask, k))
 			continue;
 		bits = snd_pcm_format_physical_width(k);
 		if (bits <= 0)
 			continue; /* ignore invalid formats */
 		if ((unsigned)bits < i->min || (unsigned)bits > i->max)
-			snd_mask_reset(&m, k);
+			snd_mask_reset(&m, (__force unsigned)k);
 	}
 	return snd_mask_refine(mask, &m);
 }
@@ -2316,14 +2319,15 @@ static int snd_pcm_hw_rule_sample_bits(struct snd_pcm_hw_params *params,
 				       struct snd_pcm_hw_rule *rule)
 {
 	struct snd_interval t;
-	unsigned int k;
+	snd_pcm_format_t k;
+
 	t.min = UINT_MAX;
 	t.max = 0;
 	t.openmin = 0;
 	t.openmax = 0;
-	for (k = 0; k <= SNDRV_PCM_FORMAT_LAST; ++k) {
+	pcm_for_each_format(k) {
 		int bits;
-		if (! snd_mask_test(hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT), k))
+		if (!snd_mask_test_format(hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT), k))
 			continue;
 		bits = snd_pcm_format_physical_width(k);
 		if (bits <= 0)
@@ -2505,16 +2509,16 @@ static int snd_pcm_hw_constraints_complete(struct snd_pcm_substream *substream)
 	unsigned int mask = 0;
 
         if (hw->info & SNDRV_PCM_INFO_INTERLEAVED)
-		mask |= 1 << SNDRV_PCM_ACCESS_RW_INTERLEAVED;
+		mask |= PARAM_MASK_BIT(SNDRV_PCM_ACCESS_RW_INTERLEAVED);
         if (hw->info & SNDRV_PCM_INFO_NONINTERLEAVED)
-		mask |= 1 << SNDRV_PCM_ACCESS_RW_NONINTERLEAVED;
+		mask |= PARAM_MASK_BIT(SNDRV_PCM_ACCESS_RW_NONINTERLEAVED);
 	if (hw_support_mmap(substream)) {
 		if (hw->info & SNDRV_PCM_INFO_INTERLEAVED)
-			mask |= 1 << SNDRV_PCM_ACCESS_MMAP_INTERLEAVED;
+			mask |= PARAM_MASK_BIT(SNDRV_PCM_ACCESS_MMAP_INTERLEAVED);
 		if (hw->info & SNDRV_PCM_INFO_NONINTERLEAVED)
-			mask |= 1 << SNDRV_PCM_ACCESS_MMAP_NONINTERLEAVED;
+			mask |= PARAM_MASK_BIT(SNDRV_PCM_ACCESS_MMAP_NONINTERLEAVED);
 		if (hw->info & SNDRV_PCM_INFO_COMPLEX)
-			mask |= 1 << SNDRV_PCM_ACCESS_MMAP_COMPLEX;
+			mask |= PARAM_MASK_BIT(SNDRV_PCM_ACCESS_MMAP_COMPLEX);
 	}
 	err = snd_pcm_hw_constraint_mask(runtime, SNDRV_PCM_HW_PARAM_ACCESS, mask);
 	if (err < 0)
@@ -2524,7 +2528,8 @@ static int snd_pcm_hw_constraints_complete(struct snd_pcm_substream *substream)
 	if (err < 0)
 		return err;
 
-	err = snd_pcm_hw_constraint_mask(runtime, SNDRV_PCM_HW_PARAM_SUBFORMAT, 1 << SNDRV_PCM_SUBFORMAT_STD);
+	err = snd_pcm_hw_constraint_mask(runtime, SNDRV_PCM_HW_PARAM_SUBFORMAT,
+					 PARAM_MASK_BIT(SNDRV_PCM_SUBFORMAT_STD));
 	if (err < 0)
 		return err;
 
diff --git a/sound/drivers/aloop.c b/sound/drivers/aloop.c
index d78a272..251eaf1 100644
--- a/sound/drivers/aloop.c
+++ b/sound/drivers/aloop.c
@@ -118,7 +118,7 @@ struct loopback_cable {
 struct loopback_setup {
 	unsigned int notify: 1;
 	unsigned int rate_shift;
-	unsigned int format;
+	snd_pcm_format_t format;
 	unsigned int rate;
 	unsigned int channels;
 	struct snd_ctl_elem_id active_id;
@@ -1432,7 +1432,7 @@ static int loopback_format_info(struct snd_kcontrol *kcontrol,
 	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
 	uinfo->count = 1;
 	uinfo->value.integer.min = 0;
-	uinfo->value.integer.max = SNDRV_PCM_FORMAT_LAST;
+	uinfo->value.integer.max = (__force int)SNDRV_PCM_FORMAT_LAST;
 	uinfo->value.integer.step = 1;
 	return 0;
 }                                  
@@ -1443,7 +1443,7 @@ static int loopback_format_get(struct snd_kcontrol *kcontrol,
 	struct loopback *loopback = snd_kcontrol_chip(kcontrol);
 	
 	ucontrol->value.integer.value[0] =
-		loopback->setup[kcontrol->id.subdevice]
+		(__force int)loopback->setup[kcontrol->id.subdevice]
 			       [kcontrol->id.device].format;
 	return 0;
 }
diff --git a/sound/drivers/dummy.c b/sound/drivers/dummy.c
index 02ac3f4..b5486de 100644
--- a/sound/drivers/dummy.c
+++ b/sound/drivers/dummy.c
@@ -901,10 +901,10 @@ static int snd_card_dummy_new_mixer(struct snd_dummy *dummy)
 static void print_formats(struct snd_dummy *dummy,
 			  struct snd_info_buffer *buffer)
 {
-	int i;
+	snd_pcm_format_t i;
 
-	for (i = 0; i <= SNDRV_PCM_FORMAT_LAST; i++) {
-		if (dummy->pcm_hw.formats & (1ULL << i))
+	pcm_for_each_format(i) {
+		if (dummy->pcm_hw.formats & pcm_format_to_bits(i))
 			snd_iprintf(buffer, " %s", snd_pcm_format_name(i));
 	}
 }
diff --git a/sound/firewire/bebob/bebob.c b/sound/firewire/bebob/bebob.c
index 976d8cb..2c8e339 100644
--- a/sound/firewire/bebob/bebob.c
+++ b/sound/firewire/bebob/bebob.c
@@ -509,7 +509,7 @@ MODULE_DEVICE_TABLE(ieee1394, bebob_id_table);
 static struct fw_driver bebob_driver = {
 	.driver = {
 		.owner	= THIS_MODULE,
-		.name	= "snd-bebob",
+		.name	= KBUILD_MODNAME,
 		.bus	= &fw_bus_type,
 	},
 	.probe    = bebob_probe,
diff --git a/sound/firewire/digi00x/digi00x.c b/sound/firewire/digi00x/digi00x.c
index 1f5fc0e..c84b913 100644
--- a/sound/firewire/digi00x/digi00x.c
+++ b/sound/firewire/digi00x/digi00x.c
@@ -192,7 +192,7 @@ MODULE_DEVICE_TABLE(ieee1394, snd_dg00x_id_table);
 static struct fw_driver dg00x_driver = {
 	.driver = {
 		.owner = THIS_MODULE,
-		.name = "snd-firewire-digi00x",
+		.name = KBUILD_MODNAME,
 		.bus = &fw_bus_type,
 	},
 	.probe    = snd_dg00x_probe,
diff --git a/sound/firewire/fireface/ff.c b/sound/firewire/fireface/ff.c
index f5a0165..b62a4fd 100644
--- a/sound/firewire/fireface/ff.c
+++ b/sound/firewire/fireface/ff.c
@@ -224,7 +224,7 @@ MODULE_DEVICE_TABLE(ieee1394, snd_ff_id_table);
 static struct fw_driver ff_driver = {
 	.driver = {
 		.owner	= THIS_MODULE,
-		.name	= "snd-fireface",
+		.name	= KBUILD_MODNAME,
 		.bus	= &fw_bus_type,
 	},
 	.probe    = snd_ff_probe,
diff --git a/sound/firewire/fireworks/fireworks.c b/sound/firewire/fireworks/fireworks.c
index 134fc9e..b1cc013 100644
--- a/sound/firewire/fireworks/fireworks.c
+++ b/sound/firewire/fireworks/fireworks.c
@@ -362,7 +362,7 @@ MODULE_DEVICE_TABLE(ieee1394, efw_id_table);
 static struct fw_driver efw_driver = {
 	.driver = {
 		.owner = THIS_MODULE,
-		.name = "snd-fireworks",
+		.name = KBUILD_MODNAME,
 		.bus = &fw_bus_type,
 	},
 	.probe    = efw_probe,
diff --git a/sound/firewire/tascam/tascam-hwdep.c b/sound/firewire/tascam/tascam-hwdep.c
index c29a97f..6f38335 100644
--- a/sound/firewire/tascam/tascam-hwdep.c
+++ b/sound/firewire/tascam/tascam-hwdep.c
@@ -17,6 +17,7 @@
 
 static long tscm_hwdep_read_locked(struct snd_tscm *tscm, char __user *buf,
 				   long count, loff_t *offset)
+	__releases(&tscm->lock)
 {
 	struct snd_firewire_event_lock_status event = {
 		.type = SNDRV_FIREWIRE_EVENT_LOCK_STATUS,
@@ -36,6 +37,7 @@ static long tscm_hwdep_read_locked(struct snd_tscm *tscm, char __user *buf,
 
 static long tscm_hwdep_read_queue(struct snd_tscm *tscm, char __user *buf,
 				  long remained, loff_t *offset)
+	__releases(&tscm->lock)
 {
 	char __user *pos = buf;
 	unsigned int type = SNDRV_FIREWIRE_EVENT_TASCAM_CONTROL;
diff --git a/sound/firewire/tascam/tascam.c b/sound/firewire/tascam/tascam.c
index addc464..5dac0d9 100644
--- a/sound/firewire/tascam/tascam.c
+++ b/sound/firewire/tascam/tascam.c
@@ -224,7 +224,7 @@ MODULE_DEVICE_TABLE(ieee1394, snd_tscm_id_table);
 static struct fw_driver tscm_driver = {
 	.driver = {
 		.owner = THIS_MODULE,
-		.name = "snd-firewire-tascam",
+		.name = KBUILD_MODNAME,
 		.bus = &fw_bus_type,
 	},
 	.probe    = snd_tscm_probe,
diff --git a/sound/hda/Kconfig b/sound/hda/Kconfig
index 4ca6b09..3bc9224 100644
--- a/sound/hda/Kconfig
+++ b/sound/hda/Kconfig
@@ -21,16 +21,17 @@
        select SND_HDA_CORE
 
 config SND_HDA_PREALLOC_SIZE
-	int "Pre-allocated buffer size for HD-audio driver" if !SND_DMA_SGBUF
+	int "Pre-allocated buffer size for HD-audio driver"
 	range 0 32768
-	default 0 if SND_DMA_SGBUF
+	default 2048 if SND_DMA_SGBUF
 	default 64 if !SND_DMA_SGBUF
 	help
 	  Specifies the default pre-allocated buffer-size in kB for the
 	  HD-audio driver.  A larger buffer (e.g. 2048) is preferred
 	  for systems using PulseAudio.  The default 64 is chosen just
 	  for compatibility reasons.
-	  On x86 systems, the default is zero as we need no preallocation.
+	  On x86 systems, the default is 2048 as a reasonable value for
+	  most of modern systems.
 
 	  Note that the pre-allocation size can be changed dynamically
 	  via a proc file (/proc/asound/card*/pcm*/sub*/prealloc), too.
diff --git a/sound/hda/hdac_device.c b/sound/hda/hdac_device.c
index 9a526ae..e3119f5 100644
--- a/sound/hda/hdac_device.c
+++ b/sound/hda/hdac_device.c
@@ -204,7 +204,7 @@ EXPORT_SYMBOL_GPL(snd_hdac_device_set_chip_name);
  */
 int snd_hdac_codec_modalias(struct hdac_device *codec, char *buf, size_t size)
 {
-	return snprintf(buf, size, "hdaudio:v%08Xr%08Xa%02X\n",
+	return scnprintf(buf, size, "hdaudio:v%08Xr%08Xa%02X\n",
 			codec->vendor_id, codec->revision_id, codec->type);
 }
 EXPORT_SYMBOL_GPL(snd_hdac_codec_modalias);
diff --git a/sound/isa/sb/emu8000_pcm.c b/sound/isa/sb/emu8000_pcm.c
index e377ac9..8e8257c 100644
--- a/sound/isa/sb/emu8000_pcm.c
+++ b/sound/isa/sb/emu8000_pcm.c
@@ -435,7 +435,7 @@ enum {
 #define LOOP_WRITE(rec, offset, _buf, count, mode)		\
 	do {							\
 		struct snd_emu8000 *emu = (rec)->emu;		\
-		unsigned short *buf = (unsigned short *)(_buf); \
+		unsigned short *buf = (__force unsigned short *)(_buf); \
 		snd_emu8000_write_wait(emu, 1);			\
 		EMU8000_SMALW_WRITE(emu, offset);		\
 		while (count > 0) {				\
@@ -492,7 +492,7 @@ static int emu8k_pcm_silence(struct snd_pcm_substream *subs,
 #define LOOP_WRITE(rec, pos, _buf, count, mode)				\
 	do {								\
 		struct snd_emu8000 *emu = rec->emu;			\
-		unsigned short *buf = (unsigned short *)(_buf);		\
+		unsigned short *buf = (__force unsigned short *)(_buf);	\
 		snd_emu8000_write_wait(emu, 1);				\
 		EMU8000_SMALW_WRITE(emu, pos + rec->loop_start[0]);	\
 		if (rec->voices > 1)					\
diff --git a/sound/oss/.gitignore b/sound/oss/.gitignore
index 12a3920..ac67843 100644
--- a/sound/oss/.gitignore
+++ b/sound/oss/.gitignore
@@ -1,3 +1,3 @@
-#Ignore generated files
+# SPDX-License-Identifier: GPL-2.0-only
 pss_boot.h
 trix_boot.h
diff --git a/sound/pci/ali5451/ali5451.c b/sound/pci/ali5451/ali5451.c
index 4f524a9..4462375 100644
--- a/sound/pci/ali5451/ali5451.c
+++ b/sound/pci/ali5451/ali5451.c
@@ -1070,7 +1070,7 @@ static int snd_ali_trigger(struct snd_pcm_substream *substream,
 {
 	struct snd_ali *codec = snd_pcm_substream_chip(substream);
 	struct snd_pcm_substream *s;
-	unsigned int what, whati, capture_flag;
+	unsigned int what, whati;
 	struct snd_ali_voice *pvoice, *evoice;
 	unsigned int val;
 	int do_start;
@@ -1088,7 +1088,7 @@ static int snd_ali_trigger(struct snd_pcm_substream *substream,
 		return -EINVAL;
 	}
 
-	what = whati = capture_flag = 0;
+	what = whati = 0;
 	snd_pcm_group_for_each_entry(s, substream) {
 		if ((struct snd_ali *) snd_pcm_substream_chip(s) == codec) {
 			pvoice = s->runtime->private_data;
@@ -1110,8 +1110,6 @@ static int snd_ali_trigger(struct snd_pcm_substream *substream,
 					evoice->running = 0;
 			}
 			snd_pcm_trigger_done(s, substream);
-			if (pvoice->mode)
-				capture_flag = 1;
 		}
 	}
 	spin_lock(&codec->reg_lock);
diff --git a/sound/pci/ctxfi/cthw20k1.c b/sound/pci/ctxfi/cthw20k1.c
index 6e3177b..015c0d6 100644
--- a/sound/pci/ctxfi/cthw20k1.c
+++ b/sound/pci/ctxfi/cthw20k1.c
@@ -168,7 +168,7 @@ static int src_get_rsc_ctrl_blk(void **rblk)
 
 static int src_put_rsc_ctrl_blk(void *blk)
 {
-	kfree((struct src_rsc_ctrl_blk *)blk);
+	kfree(blk);
 
 	return 0;
 }
@@ -494,7 +494,7 @@ static int src_mgr_get_ctrl_blk(void **rblk)
 
 static int src_mgr_put_ctrl_blk(void *blk)
 {
-	kfree((struct src_mgr_ctrl_blk *)blk);
+	kfree(blk);
 
 	return 0;
 }
@@ -515,7 +515,7 @@ static int srcimp_mgr_get_ctrl_blk(void **rblk)
 
 static int srcimp_mgr_put_ctrl_blk(void *blk)
 {
-	kfree((struct srcimp_mgr_ctrl_blk *)blk);
+	kfree(blk);
 
 	return 0;
 }
@@ -702,7 +702,7 @@ static int amixer_rsc_get_ctrl_blk(void **rblk)
 
 static int amixer_rsc_put_ctrl_blk(void *blk)
 {
-	kfree((struct amixer_rsc_ctrl_blk *)blk);
+	kfree(blk);
 
 	return 0;
 }
@@ -909,7 +909,7 @@ static int dai_get_ctrl_blk(void **rblk)
 
 static int dai_put_ctrl_blk(void *blk)
 {
-	kfree((struct dai_ctrl_blk *)blk);
+	kfree(blk);
 
 	return 0;
 }
@@ -958,7 +958,7 @@ static int dao_get_ctrl_blk(void **rblk)
 
 static int dao_put_ctrl_blk(void *blk)
 {
-	kfree((struct dao_ctrl_blk *)blk);
+	kfree(blk);
 
 	return 0;
 }
@@ -1156,7 +1156,7 @@ static int daio_mgr_get_ctrl_blk(struct hw *hw, void **rblk)
 
 static int daio_mgr_put_ctrl_blk(void *blk)
 {
-	kfree((struct daio_mgr_ctrl_blk *)blk);
+	kfree(blk);
 
 	return 0;
 }
diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c
index a89a7e6..6ff5817 100644
--- a/sound/pci/emu10k1/emu10k1_main.c
+++ b/sound/pci/emu10k1/emu10k1_main.c
@@ -1789,6 +1789,7 @@ int snd_emu10k1_create(struct snd_card *card,
 	int idx, err;
 	int is_audigy;
 	size_t page_table_size;
+	__le32 *pgtbl;
 	unsigned int silent_page;
 	const struct snd_emu_chip_details *c;
 	static const struct snd_device_ops ops = {
@@ -2009,8 +2010,9 @@ int snd_emu10k1_create(struct snd_card *card,
 	/* Clear silent pages and set up pointers */
 	memset(emu->silent_page.area, 0, emu->silent_page.bytes);
 	silent_page = emu->silent_page.addr << emu->address_mode;
+	pgtbl = (__le32 *)emu->ptb_pages.area;
 	for (idx = 0; idx < (emu->address_mode ? MAXPAGES1 : MAXPAGES0); idx++)
-		((u32 *)emu->ptb_pages.area)[idx] = cpu_to_le32(silent_page | idx);
+		pgtbl[idx] = cpu_to_le32(silent_page | idx);
 
 	/* set up voice indices */
 	for (idx = 0; idx < NUM_G; idx++) {
diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig
index bd48335..e1d3082 100644
--- a/sound/pci/hda/Kconfig
+++ b/sound/pci/hda/Kconfig
@@ -184,6 +184,7 @@
 config SND_HDA_CODEC_CA0132_DSP
 	bool "Support new DSP code for CA0132 codec"
 	depends on SND_HDA_CODEC_CA0132
+	default y
 	select SND_HDA_DSP_LOADER
 	select FW_LOADER
 	help
diff --git a/sound/pci/hda/hda_beep.c b/sound/pci/hda/hda_beep.c
index f5fd62e..841523f 100644
--- a/sound/pci/hda/hda_beep.c
+++ b/sound/pci/hda/hda_beep.c
@@ -290,8 +290,12 @@ int snd_hda_mixer_amp_switch_get_beep(struct snd_kcontrol *kcontrol,
 {
 	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct hda_beep *beep = codec->beep;
+	int chs = get_amp_channels(kcontrol);
+
 	if (beep && (!beep->enabled || !ctl_has_mute(kcontrol))) {
-		ucontrol->value.integer.value[0] =
+		if (chs & 1)
+			ucontrol->value.integer.value[0] = beep->enabled;
+		if (chs & 2)
 			ucontrol->value.integer.value[1] = beep->enabled;
 		return 0;
 	}
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 53e7732..86a632b 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -88,7 +88,7 @@ struct hda_conn_list {
 	struct list_head list;
 	int len;
 	hda_nid_t nid;
-	hda_nid_t conns[0];
+	hda_nid_t conns[];
 };
 
 /* look up the cached results */
@@ -2951,7 +2951,7 @@ static int hda_codec_runtime_resume(struct device *dev)
 static int hda_codec_force_resume(struct device *dev)
 {
 	struct hda_codec *codec = dev_to_hda_codec(dev);
-	bool forced_resume = !codec->relaxed_resume && codec->jacktbl.used;
+	bool forced_resume = hda_codec_need_resume(codec);
 	int ret;
 
 	/* The get/put pair below enforces the runtime resume even if the
diff --git a/sound/pci/hda/hda_controller.c b/sound/pci/hda/hda_controller.c
index 2609e39..9765652 100644
--- a/sound/pci/hda/hda_controller.c
+++ b/sound/pci/hda/hda_controller.c
@@ -373,7 +373,7 @@ static int azx_get_sync_time(ktime_t *device,
 	u32 wallclk_ctr, wallclk_cycles;
 	bool direction;
 	u32 dma_select;
-	u32 timeout = 200;
+	u32 timeout;
 	u32 retry_count = 0;
 
 	runtime = substream->runtime;
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 92a042e..a5fab12 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1027,7 +1027,7 @@ static int azx_suspend(struct device *dev)
 	chip = card->private_data;
 	bus = azx_bus(chip);
 	snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
-	__azx_runtime_suspend(chip);
+	pm_runtime_force_suspend(dev);
 	if (bus->irq >= 0) {
 		free_irq(bus->irq, chip);
 		bus->irq = -1;
@@ -1044,7 +1044,9 @@ static int azx_suspend(struct device *dev)
 static int azx_resume(struct device *dev)
 {
 	struct snd_card *card = dev_get_drvdata(dev);
+	struct hda_codec *codec;
 	struct azx *chip;
+	bool forced_resume = false;
 
 	if (!azx_is_pm_ready(card))
 		return 0;
@@ -1055,7 +1057,20 @@ static int azx_resume(struct device *dev)
 			chip->msi = 0;
 	if (azx_acquire_irq(chip, 1) < 0)
 		return -EIO;
-	__azx_runtime_resume(chip, false);
+
+	/* check for the forced resume */
+	list_for_each_codec(codec, &chip->bus) {
+		if (hda_codec_need_resume(codec)) {
+			forced_resume = true;
+			break;
+		}
+	}
+
+	if (forced_resume)
+		pm_runtime_get_noresume(dev);
+	pm_runtime_force_resume(dev);
+	if (forced_resume)
+		pm_runtime_put(dev);
 	snd_power_change_state(card, SNDRV_CTL_POWER_D0);
 
 	trace_azx_resume(chip);
@@ -1071,6 +1086,8 @@ static int azx_freeze_noirq(struct device *dev)
 	struct azx *chip = card->private_data;
 	struct pci_dev *pci = to_pci_dev(dev);
 
+	if (!azx_is_pm_ready(card))
+		return 0;
 	if (chip->driver_type == AZX_DRIVER_SKL)
 		pci_set_power_state(pci, PCI_D3hot);
 
@@ -1083,6 +1100,8 @@ static int azx_thaw_noirq(struct device *dev)
 	struct azx *chip = card->private_data;
 	struct pci_dev *pci = to_pci_dev(dev);
 
+	if (!azx_is_pm_ready(card))
+		return 0;
 	if (chip->driver_type == AZX_DRIVER_SKL)
 		pci_set_power_state(pci, PCI_D0);
 
@@ -1098,12 +1117,12 @@ static int azx_runtime_suspend(struct device *dev)
 	if (!azx_is_pm_ready(card))
 		return 0;
 	chip = card->private_data;
-	if (!azx_has_pm_runtime(chip))
-		return 0;
 
 	/* enable controller wake up event */
-	azx_writew(chip, WAKEEN, azx_readw(chip, WAKEEN) |
-		  STATESTS_INT_MASK);
+	if (snd_power_get_state(card) == SNDRV_CTL_POWER_D0) {
+		azx_writew(chip, WAKEEN, azx_readw(chip, WAKEEN) |
+			   STATESTS_INT_MASK);
+	}
 
 	__azx_runtime_suspend(chip);
 	trace_azx_runtime_suspend(chip);
@@ -1114,17 +1133,18 @@ static int azx_runtime_resume(struct device *dev)
 {
 	struct snd_card *card = dev_get_drvdata(dev);
 	struct azx *chip;
+	bool from_rt = snd_power_get_state(card) == SNDRV_CTL_POWER_D0;
 
 	if (!azx_is_pm_ready(card))
 		return 0;
 	chip = card->private_data;
-	if (!azx_has_pm_runtime(chip))
-		return 0;
-	__azx_runtime_resume(chip, true);
+	__azx_runtime_resume(chip, from_rt);
 
 	/* disable controller Wake Up event*/
-	azx_writew(chip, WAKEEN, azx_readw(chip, WAKEEN) &
-			~STATESTS_INT_MASK);
+	if (from_rt) {
+		azx_writew(chip, WAKEEN, azx_readw(chip, WAKEEN) &
+			   ~STATESTS_INT_MASK);
+	}
 
 	trace_azx_runtime_resume(chip);
 	return 0;
@@ -1199,10 +1219,8 @@ static void azx_vs_set_state(struct pci_dev *pci,
 		if (!disabled) {
 			dev_info(chip->card->dev,
 				 "Start delayed initialization\n");
-			if (azx_probe_continue(chip) < 0) {
+			if (azx_probe_continue(chip) < 0)
 				dev_err(chip->card->dev, "initialization error\n");
-				hda->init_failed = true;
-			}
 		}
 	} else {
 		dev_info(chip->card->dev, "%s via vga_switcheroo\n",
@@ -1335,12 +1353,15 @@ static int register_vga_switcheroo(struct azx *chip)
 /*
  * destructor
  */
-static int azx_free(struct azx *chip)
+static void azx_free(struct azx *chip)
 {
 	struct pci_dev *pci = chip->pci;
 	struct hda_intel *hda = container_of(chip, struct hda_intel, chip);
 	struct hdac_bus *bus = azx_bus(chip);
 
+	if (hda->freed)
+		return;
+
 	if (azx_has_pm_runtime(chip) && chip->running)
 		pm_runtime_get_noresume(&pci->dev);
 	chip->running = 0;
@@ -1384,9 +1405,8 @@ static int azx_free(struct azx *chip)
 
 	if (chip->driver_caps & AZX_DCAPS_I915_COMPONENT)
 		snd_hdac_i915_exit(bus);
-	kfree(hda);
 
-	return 0;
+	hda->freed = 1;
 }
 
 static int azx_dev_disconnect(struct snd_device *device)
@@ -1402,7 +1422,8 @@ static int azx_dev_disconnect(struct snd_device *device)
 
 static int azx_dev_free(struct snd_device *device)
 {
-	return azx_free(device->device_data);
+	azx_free(device->device_data);
+	return 0;
 }
 
 #ifdef SUPPORT_VGA_SWITCHEROO
@@ -1769,7 +1790,7 @@ static int azx_create(struct snd_card *card, struct pci_dev *pci,
 	if (err < 0)
 		return err;
 
-	hda = kzalloc(sizeof(*hda), GFP_KERNEL);
+	hda = devm_kzalloc(&pci->dev, sizeof(*hda), GFP_KERNEL);
 	if (!hda) {
 		pci_disable_device(pci);
 		return -ENOMEM;
@@ -1810,7 +1831,6 @@ static int azx_create(struct snd_card *card, struct pci_dev *pci,
 
 	err = azx_bus_init(chip, model[dev]);
 	if (err < 0) {
-		kfree(hda);
 		pci_disable_device(pci);
 		return err;
 	}
@@ -2005,7 +2025,7 @@ static int azx_first_init(struct azx *chip)
 	/* codec detection */
 	if (!azx_bus(chip)->codec_mask) {
 		dev_err(card->dev, "no codecs found!\n");
-		return -ENODEV;
+		/* keep running the rest for the runtime PM */
 	}
 
 	if (azx_acquire_irq(chip, 0) < 0)
@@ -2027,24 +2047,15 @@ static void azx_firmware_cb(const struct firmware *fw, void *context)
 {
 	struct snd_card *card = context;
 	struct azx *chip = card->private_data;
-	struct pci_dev *pci = chip->pci;
 
-	if (!fw) {
-		dev_err(card->dev, "Cannot load firmware, aborting\n");
-		goto error;
-	}
-
-	chip->fw = fw;
+	if (fw)
+		chip->fw = fw;
+	else
+		dev_err(card->dev, "Cannot load firmware, continue without patching\n");
 	if (!chip->disabled) {
 		/* continue probing */
-		if (azx_probe_continue(chip))
-			goto error;
+		azx_probe_continue(chip);
 	}
-	return; /* OK */
-
- error:
-	snd_card_free(card);
-	pci_set_drvdata(pci, NULL);
 }
 #endif
 
@@ -2076,6 +2087,17 @@ static void pcm_mmap_prepare(struct snd_pcm_substream *substream,
 #endif
 }
 
+/* Blacklist for skipping the whole probe:
+ * some HD-audio PCI entries are exposed without any codecs, and such devices
+ * should be ignored from the beginning.
+ */
+static const struct snd_pci_quirk driver_blacklist[] = {
+	SND_PCI_QUIRK(0x1043, 0x874f, "ASUS ROG Zenith II / Strix", 0),
+	SND_PCI_QUIRK(0x1462, 0xcb59, "MSI TRX40 Creator", 0),
+	SND_PCI_QUIRK(0x1462, 0xcb60, "MSI TRX40", 0),
+	{}
+};
+
 static const struct hda_controller_ops pci_hda_ops = {
 	.disable_msi_reset_irq = disable_msi_reset_irq,
 	.pcm_mmap_prepare = pcm_mmap_prepare,
@@ -2092,6 +2114,11 @@ static int azx_probe(struct pci_dev *pci,
 	bool schedule_probe;
 	int err;
 
+	if (snd_pci_quirk_lookup(pci, driver_blacklist)) {
+		dev_info(&pci->dev, "Skipping the blacklisted device\n");
+		return -ENODEV;
+	}
+
 	if (dev >= SNDRV_CARDS)
 		return -ENODEV;
 	if (!enable[dev]) {
@@ -2292,9 +2319,11 @@ static int azx_probe_continue(struct azx *chip)
 #endif
 
 	/* create codec instances */
-	err = azx_probe_codecs(chip, azx_max_codecs[chip->driver_type]);
-	if (err < 0)
-		goto out_free;
+	if (bus->codec_mask) {
+		err = azx_probe_codecs(chip, azx_max_codecs[chip->driver_type]);
+		if (err < 0)
+			goto out_free;
+	}
 
 #ifdef CONFIG_SND_HDA_PATCH_LOADER
 	if (chip->fw) {
@@ -2308,7 +2337,7 @@ static int azx_probe_continue(struct azx *chip)
 #endif
 	}
 #endif
-	if ((probe_only[dev] & 1) == 0) {
+	if (bus->codec_mask && !(probe_only[dev] & 1)) {
 		err = azx_codec_configure(chip);
 		if (err < 0)
 			goto out_free;
@@ -2325,17 +2354,23 @@ static int azx_probe_continue(struct azx *chip)
 
 	set_default_power_save(chip);
 
-	if (azx_has_pm_runtime(chip))
+	if (azx_has_pm_runtime(chip)) {
+		pm_runtime_use_autosuspend(&pci->dev);
+		pm_runtime_allow(&pci->dev);
 		pm_runtime_put_autosuspend(&pci->dev);
+	}
 
 out_free:
-	if (err < 0 || !hda->need_i915_power)
+	if (err < 0) {
+		azx_free(chip);
+		return err;
+	}
+
+	if (!hda->need_i915_power)
 		display_power(chip, false);
-	if (err < 0)
-		hda->init_failed = 1;
 	complete_all(&hda->probe_wait);
 	to_hda_bus(bus)->bus_probing = 0;
-	return err;
+	return 0;
 }
 
 static void azx_remove(struct pci_dev *pci)
diff --git a/sound/pci/hda/hda_intel.h b/sound/pci/hda/hda_intel.h
index 2acfff3..3fb119f 100644
--- a/sound/pci/hda/hda_intel.h
+++ b/sound/pci/hda/hda_intel.h
@@ -27,6 +27,7 @@ struct hda_intel {
 	unsigned int use_vga_switcheroo:1;
 	unsigned int vga_switcheroo_registered:1;
 	unsigned int init_failed:1; /* delayed init failed */
+	unsigned int freed:1; /* resources already released */
 
 	bool need_i915_power:1; /* the hda controller needs i915 power */
 };
diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c
index ded8bc0..34fe753 100644
--- a/sound/pci/hda/patch_ca0132.c
+++ b/sound/pci/hda/patch_ca0132.c
@@ -1180,6 +1180,7 @@ static const struct snd_pci_quirk ca0132_quirks[] = {
 	SND_PCI_QUIRK(0x1458, 0xA016, "Recon3Di", QUIRK_R3DI),
 	SND_PCI_QUIRK(0x1458, 0xA026, "Gigabyte G1.Sniper Z97", QUIRK_R3DI),
 	SND_PCI_QUIRK(0x1458, 0xA036, "Gigabyte GA-Z170X-Gaming 7", QUIRK_R3DI),
+	SND_PCI_QUIRK(0x3842, 0x1038, "EVGA X99 Classified", QUIRK_R3DI),
 	SND_PCI_QUIRK(0x1102, 0x0013, "Recon3D", QUIRK_R3D),
 	SND_PCI_QUIRK(0x1102, 0x0051, "Sound Blaster AE-5", QUIRK_AE5),
 	{}
@@ -2698,7 +2699,7 @@ struct dsp_image_seg {
 	u32 magic;
 	u32 chip_addr;
 	u32 count;
-	u32 data[0];
+	u32 data[];
 };
 
 static const u32 g_magic_value = 0x4c46584d;
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index 5119a9a..bb287a9 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -154,7 +154,6 @@ struct hdmi_spec {
 	struct hda_multi_out multiout;
 	struct hda_pcm_stream pcm_playback;
 
-	bool use_jack_detect; /* jack detection enabled */
 	bool use_acomp_notifier; /* use eld_notify callback for hotplug */
 	bool acomp_registered; /* audio component registered in this driver */
 	struct drm_audio_component_audio_ops drm_audio_ops;
@@ -753,7 +752,7 @@ static void hdmi_setup_audio_infoframe(struct hda_codec *codec,
  * Unsolicited events
  */
 
-static bool hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, int repoll);
+static void hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, int repoll);
 
 static void check_presence_and_report(struct hda_codec *codec, hda_nid_t nid,
 				      int dev_id)
@@ -764,8 +763,7 @@ static void check_presence_and_report(struct hda_codec *codec, hda_nid_t nid,
 	if (pin_idx < 0)
 		return;
 	mutex_lock(&spec->pcm_lock);
-	if (hdmi_present_sense(get_pin(spec, pin_idx), 1))
-		snd_hda_jack_report_sync(codec);
+	hdmi_present_sense(get_pin(spec, pin_idx), 1);
 	mutex_unlock(&spec->pcm_lock);
 }
 
@@ -779,21 +777,9 @@ static void jack_callback(struct hda_codec *codec,
 	check_presence_and_report(codec, jack->nid, jack->dev_id);
 }
 
-static void hdmi_intrinsic_event(struct hda_codec *codec, unsigned int res)
+static void hdmi_intrinsic_event(struct hda_codec *codec, unsigned int res,
+				 struct hda_jack_tbl *jack)
 {
-	int tag = res >> AC_UNSOL_RES_TAG_SHIFT;
-	struct hda_jack_tbl *jack;
-
-	if (codec->dp_mst) {
-		int dev_entry =
-			(res & AC_UNSOL_RES_DE) >> AC_UNSOL_RES_DE_SHIFT;
-
-		jack = snd_hda_jack_tbl_get_from_tag(codec, tag, dev_entry);
-	} else {
-		jack = snd_hda_jack_tbl_get_from_tag(codec, tag, 0);
-	}
-	if (!jack)
-		return;
 	jack->jack_dirty = 1;
 
 	codec_dbg(codec,
@@ -853,7 +839,7 @@ static void hdmi_unsol_event(struct hda_codec *codec, unsigned int res)
 	}
 
 	if (subtag == 0)
-		hdmi_intrinsic_event(codec, res);
+		hdmi_intrinsic_event(codec, res, jack);
 	else
 		hdmi_non_intrinsic_event(codec, res);
 }
@@ -1480,21 +1466,60 @@ static void hdmi_pcm_reset_pin(struct hdmi_spec *spec,
 	per_pin->channels = 0;
 }
 
+static struct snd_jack *pin_idx_to_pcm_jack(struct hda_codec *codec,
+					    struct hdmi_spec_per_pin *per_pin)
+{
+	struct hdmi_spec *spec = codec->spec;
+
+	if (per_pin->pcm_idx >= 0)
+		return spec->pcm_rec[per_pin->pcm_idx].jack;
+	else
+		return NULL;
+}
+
 /* update per_pin ELD from the given new ELD;
  * setup info frame and notification accordingly
+ * also notify ELD kctl and report jack status changes
  */
-static bool update_eld(struct hda_codec *codec,
+static void update_eld(struct hda_codec *codec,
 		       struct hdmi_spec_per_pin *per_pin,
-		       struct hdmi_eld *eld)
+		       struct hdmi_eld *eld,
+		       int repoll)
 {
 	struct hdmi_eld *pin_eld = &per_pin->sink_eld;
 	struct hdmi_spec *spec = codec->spec;
+	struct snd_jack *pcm_jack;
 	bool old_eld_valid = pin_eld->eld_valid;
 	bool eld_changed;
 	int pcm_idx;
 
+	if (eld->eld_valid) {
+		if (eld->eld_size <= 0 ||
+		    snd_hdmi_parse_eld(codec, &eld->info, eld->eld_buffer,
+				       eld->eld_size) < 0) {
+			eld->eld_valid = false;
+			if (repoll) {
+				schedule_delayed_work(&per_pin->work,
+						      msecs_to_jiffies(300));
+				return;
+			}
+		}
+	}
+
+	if (!eld->eld_valid || eld->eld_size <= 0) {
+		eld->eld_valid = false;
+		eld->eld_size = 0;
+	}
+
 	/* for monitor disconnection, save pcm_idx firstly */
 	pcm_idx = per_pin->pcm_idx;
+
+	/*
+	 * pcm_idx >=0 before update_eld() means it is in monitor
+	 * disconnected event. Jack must be fetched before update_eld().
+	 */
+	pcm_jack = pin_idx_to_pcm_jack(codec, per_pin);
+
 	if (spec->dyn_pcm_assign) {
 		if (eld->eld_valid) {
 			hdmi_attach_hda_pcm(spec, per_pin);
@@ -1509,6 +1534,8 @@ static bool update_eld(struct hda_codec *codec,
 	 */
 	if (pcm_idx == -1)
 		pcm_idx = per_pin->pcm_idx;
+	if (!pcm_jack)
+		pcm_jack = pin_idx_to_pcm_jack(codec, per_pin);
 
 	if (eld->eld_valid)
 		snd_hdmi_show_eld(codec, &eld->info);
@@ -1547,42 +1574,17 @@ static bool update_eld(struct hda_codec *codec,
 			       SNDRV_CTL_EVENT_MASK_VALUE |
 			       SNDRV_CTL_EVENT_MASK_INFO,
 			       &get_hdmi_pcm(spec, pcm_idx)->eld_ctl->id);
-	return eld_changed;
+
+	if (eld_changed && pcm_jack)
+		snd_jack_report(pcm_jack,
+				(eld->monitor_present && eld->eld_valid) ?
+				SND_JACK_AVOUT : 0);
 }
 
-static struct snd_jack *pin_idx_to_pcm_jack(struct hda_codec *codec,
-					    struct hdmi_spec_per_pin *per_pin)
-{
-	struct hdmi_spec *spec = codec->spec;
-	struct snd_jack *jack = NULL;
-	struct hda_jack_tbl *jack_tbl;
-
-	/* if !dyn_pcm_assign, get jack from hda_jack_tbl
-	 * in !dyn_pcm_assign case, spec->pcm_rec[].jack is not
-	 * NULL even after snd_hda_jack_tbl_clear() is called to
-	 * free snd_jack. This may cause access invalid memory
-	 * when calling snd_jack_report
-	 */
-	if (per_pin->pcm_idx >= 0 && spec->dyn_pcm_assign) {
-		jack = spec->pcm_rec[per_pin->pcm_idx].jack;
-	} else if (!spec->dyn_pcm_assign) {
-		/*
-		 * jack tbl doesn't support DP MST
-		 * DP MST will use dyn_pcm_assign,
-		 * so DP MST will never come here
-		 */
-		jack_tbl = snd_hda_jack_tbl_get_mst(codec, per_pin->pin_nid,
-						    per_pin->dev_id);
-		if (jack_tbl)
-			jack = jack_tbl->jack;
-	}
-	return jack;
-}
 /* update ELD and jack state via HD-audio verbs */
-static bool hdmi_present_sense_via_verbs(struct hdmi_spec_per_pin *per_pin,
+static void hdmi_present_sense_via_verbs(struct hdmi_spec_per_pin *per_pin,
 					 int repoll)
 {
-	struct hda_jack_tbl *jack;
 	struct hda_codec *codec = per_pin->codec;
 	struct hdmi_spec *spec = codec->spec;
 	struct hdmi_eld *eld = &spec->temp_eld;
@@ -1597,9 +1599,11 @@ static bool hdmi_present_sense_via_verbs(struct hdmi_spec_per_pin *per_pin,
 	 * the unsolicited response to avoid custom WARs.
 	 */
 	int present;
-	bool ret;
-	bool do_repoll = false;
-	struct snd_jack *pcm_jack = NULL;
+	int ret;
+
+	ret = snd_hda_power_up_pm(codec);
+	if (ret < 0 && pm_runtime_suspended(hda_codec_dev(codec)))
+		goto out;
 
 	present = snd_hda_jack_pin_sense(codec, pin_nid, dev_id);
 
@@ -1618,62 +1622,12 @@ static bool hdmi_present_sense_via_verbs(struct hdmi_spec_per_pin *per_pin,
 		if (spec->ops.pin_get_eld(codec, pin_nid, dev_id,
 					  eld->eld_buffer, &eld->eld_size) < 0)
 			eld->eld_valid = false;
-		else {
-			if (snd_hdmi_parse_eld(codec, &eld->info, eld->eld_buffer,
-						    eld->eld_size) < 0)
-				eld->eld_valid = false;
-		}
-		if (!eld->eld_valid && repoll)
-			do_repoll = true;
 	}
 
-	if (do_repoll) {
-		schedule_delayed_work(&per_pin->work, msecs_to_jiffies(300));
-	} else {
-		/*
-		 * pcm_idx >=0 before update_eld() means it is in monitor
-		 * disconnected event. Jack must be fetched before
-		 * update_eld().
-		 */
-		pcm_jack = pin_idx_to_pcm_jack(codec, per_pin);
-		update_eld(codec, per_pin, eld);
-		if (!pcm_jack)
-			pcm_jack = pin_idx_to_pcm_jack(codec, per_pin);
-	}
-
-	ret = !repoll || !eld->monitor_present || eld->eld_valid;
-
-	jack = snd_hda_jack_tbl_get_mst(codec, pin_nid, per_pin->dev_id);
-	if (jack) {
-		jack->block_report = !ret;
-		jack->pin_sense = (eld->monitor_present && eld->eld_valid) ?
-			AC_PINSENSE_PRESENCE : 0;
-
-		if (spec->dyn_pcm_assign && pcm_jack && !do_repoll) {
-			int state = 0;
-
-			if (jack->pin_sense & AC_PINSENSE_PRESENCE)
-				state = SND_JACK_AVOUT;
-			snd_jack_report(pcm_jack, state);
-		}
-
-		/*
-		 * snd_hda_jack_pin_sense() call at the beginning of this
-		 * function, updates jack->pins_sense and clears
-		 * jack->jack_dirty, therefore snd_hda_jack_report_sync() will
-		 * not override the jack->pin_sense.
-		 *
-		 * snd_hda_jack_report_sync() is superfluous for dyn_pcm_assign
-		 * case. The jack->pin_sense update was already performed, and
-		 * hda_jack->jack is NULL for dyn_pcm_assign.
-		 *
-		 * Don't call snd_hda_jack_report_sync() for
-		 * dyn_pcm_assign.
-		 */
-		ret = ret && !spec->dyn_pcm_assign;
-	}
+	update_eld(codec, per_pin, eld, repoll);
 	mutex_unlock(&per_pin->lock);
-	return ret;
+ out:
+	snd_hda_power_down_pm(codec);
 }
 
 /* update ELD and jack state via audio component */
@@ -1682,64 +1636,25 @@ static void sync_eld_via_acomp(struct hda_codec *codec,
 {
 	struct hdmi_spec *spec = codec->spec;
 	struct hdmi_eld *eld = &spec->temp_eld;
-	struct snd_jack *jack = NULL;
-	bool changed;
-	int size;
 
 	mutex_lock(&per_pin->lock);
 	eld->monitor_present = false;
-	size = snd_hdac_acomp_get_eld(&codec->core, per_pin->pin_nid,
+	eld->eld_size = snd_hdac_acomp_get_eld(&codec->core, per_pin->pin_nid,
 				      per_pin->dev_id, &eld->monitor_present,
 				      eld->eld_buffer, ELD_MAX_SIZE);
-	if (size > 0) {
-		size = min(size, ELD_MAX_SIZE);
-		if (snd_hdmi_parse_eld(codec, &eld->info,
-				       eld->eld_buffer, size) < 0)
-			size = -EINVAL;
-	}
-
-	if (size > 0) {
-		eld->eld_valid = true;
-		eld->eld_size = size;
-	} else {
-		eld->eld_valid = false;
-		eld->eld_size = 0;
-	}
-
-	/* pcm_idx >=0 before update_eld() means it is in monitor
-	 * disconnected event. Jack must be fetched before update_eld()
-	 */
-	jack = pin_idx_to_pcm_jack(codec, per_pin);
-	changed = update_eld(codec, per_pin, eld);
-	if (jack == NULL)
-		jack = pin_idx_to_pcm_jack(codec, per_pin);
-	if (changed && jack)
-		snd_jack_report(jack,
-				(eld->monitor_present && eld->eld_valid) ?
-				SND_JACK_AVOUT : 0);
+	eld->eld_valid = (eld->eld_size > 0);
+	update_eld(codec, per_pin, eld, 0);
 	mutex_unlock(&per_pin->lock);
 }
 
-static bool hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, int repoll)
+static void hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, int repoll)
 {
 	struct hda_codec *codec = per_pin->codec;
-	int ret;
 
-	/* no temporary power up/down needed for component notifier */
-	if (!codec_has_acomp(codec)) {
-		ret = snd_hda_power_up_pm(codec);
-		if (ret < 0 && pm_runtime_suspended(hda_codec_dev(codec))) {
-			snd_hda_power_down_pm(codec);
-			return false;
-		}
-		ret = hdmi_present_sense_via_verbs(per_pin, repoll);
-		snd_hda_power_down_pm(codec);
-	} else {
+	if (!codec_has_acomp(codec))
+		hdmi_present_sense_via_verbs(per_pin, repoll);
+	else
 		sync_eld_via_acomp(codec, per_pin);
-		ret = false; /* don't call snd_hda_jack_report_sync() */
-	}
-
-	return ret;
 }
 
 static void hdmi_repoll_eld(struct work_struct *work)
@@ -1759,8 +1674,7 @@ static void hdmi_repoll_eld(struct work_struct *work)
 		per_pin->repoll_count = 0;
 
 	mutex_lock(&spec->pcm_lock);
-	if (hdmi_present_sense(per_pin, per_pin->repoll_count))
-		snd_hda_jack_report_sync(per_pin->codec);
+	hdmi_present_sense(per_pin, per_pin->repoll_count);
 	mutex_unlock(&spec->pcm_lock);
 }
 
@@ -2206,15 +2120,23 @@ static void free_hdmi_jack_priv(struct snd_jack *jack)
 	pcm->jack = NULL;
 }
 
-static int add_hdmi_jack_kctl(struct hda_codec *codec,
-			       struct hdmi_spec *spec,
-			       int pcm_idx,
-			       const char *name)
+static int generic_hdmi_build_jack(struct hda_codec *codec, int pcm_idx)
 {
+	char hdmi_str[32] = "HDMI/DP";
+	struct hdmi_spec *spec = codec->spec;
+	struct hdmi_spec_per_pin *per_pin = get_pin(spec, pcm_idx);
 	struct snd_jack *jack;
+	int pcmdev = get_pcm_rec(spec, pcm_idx)->device;
 	int err;
 
-	err = snd_jack_new(codec->card, name, SND_JACK_AVOUT, &jack,
+	if (pcmdev > 0)
+		sprintf(hdmi_str + strlen(hdmi_str), ",pcm=%d", pcmdev);
+	if (!spec->dyn_pcm_assign &&
+	    !is_jack_detectable(codec, per_pin->pin_nid))
+		strncat(hdmi_str, " Phantom",
+			sizeof(hdmi_str) - strlen(hdmi_str) - 1);
+
+	err = snd_jack_new(codec->card, hdmi_str, SND_JACK_AVOUT, &jack,
 			   true, false);
 	if (err < 0)
 		return err;
@@ -2225,48 +2147,6 @@ static int add_hdmi_jack_kctl(struct hda_codec *codec,
 	return 0;
 }
 
-static int generic_hdmi_build_jack(struct hda_codec *codec, int pcm_idx)
-{
-	char hdmi_str[32] = "HDMI/DP";
-	struct hdmi_spec *spec = codec->spec;
-	struct hdmi_spec_per_pin *per_pin;
-	struct hda_jack_tbl *jack;
-	int pcmdev = get_pcm_rec(spec, pcm_idx)->device;
-	bool phantom_jack;
-	int ret;
-
-	if (pcmdev > 0)
-		sprintf(hdmi_str + strlen(hdmi_str), ",pcm=%d", pcmdev);
-
-	if (spec->dyn_pcm_assign)
-		return add_hdmi_jack_kctl(codec, spec, pcm_idx, hdmi_str);
-
-	/* for !dyn_pcm_assign, we still use hda_jack for compatibility */
-	/* if !dyn_pcm_assign, it must be non-MST mode.
-	 * This means pcms and pins are statically mapped.
-	 * And pcm_idx is pin_idx.
-	 */
-	per_pin = get_pin(spec, pcm_idx);
-	phantom_jack = !is_jack_detectable(codec, per_pin->pin_nid);
-	if (phantom_jack)
-		strncat(hdmi_str, " Phantom",
-			sizeof(hdmi_str) - strlen(hdmi_str) - 1);
-	ret = snd_hda_jack_add_kctl_mst(codec, per_pin->pin_nid,
-					per_pin->dev_id, hdmi_str, phantom_jack,
-					0, NULL);
-	if (ret < 0)
-		return ret;
-	jack = snd_hda_jack_tbl_get_mst(codec, per_pin->pin_nid,
-					per_pin->dev_id);
-	if (jack == NULL)
-		return 0;
-	/* assign jack->jack to pcm_rec[].jack to
-	 * align with dyn_pcm_assign mode
-	 */
-	spec->pcm_rec[pcm_idx].jack = jack->jack;
-	return 0;
-}
-
 static int generic_hdmi_build_controls(struct hda_codec *codec)
 {
 	struct hdmi_spec *spec = codec->spec;
@@ -2355,7 +2235,6 @@ static int generic_hdmi_init(struct hda_codec *codec)
 	int pin_idx;
 
 	mutex_lock(&spec->bind_lock);
-	spec->use_jack_detect = !codec->jackpoll_interval;
 	for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) {
 		struct hdmi_spec_per_pin *per_pin = get_pin(spec, pin_idx);
 		hda_nid_t pin_nid = per_pin->pin_nid;
@@ -2365,12 +2244,8 @@ static int generic_hdmi_init(struct hda_codec *codec)
 		hdmi_init_pin(codec, pin_nid);
 		if (codec_has_acomp(codec))
 			continue;
-		if (spec->use_jack_detect)
-			snd_hda_jack_detect_enable(codec, pin_nid, dev_id);
-		else
-			snd_hda_jack_detect_enable_callback_mst(codec, pin_nid,
-								dev_id,
-								jack_callback);
+		snd_hda_jack_detect_enable_callback_mst(codec, pin_nid, dev_id,
+							jack_callback);
 	}
 	mutex_unlock(&spec->bind_lock);
 	return 0;
@@ -2532,12 +2407,6 @@ static void reprogram_jack_detect(struct hda_codec *codec, hda_nid_t nid,
 		unsigned int val = use_acomp ? 0 : (AC_USRSP_EN | tbl->tag);
 		snd_hda_codec_write_cache(codec, nid, 0,
 					  AC_VERB_SET_UNSOLICITED_ENABLE, val);
-	} else {
-		/* if no jack entry was defined beforehand, create a new one
-		 * at need (i.e. only when notifier is cleared)
-		 */
-		if (!use_acomp)
-			snd_hda_jack_detect_enable(codec, nid, dev_id);
 	}
 }
 
@@ -2553,13 +2422,11 @@ static void generic_acomp_notifier_set(struct drm_audio_component *acomp,
 	spec->use_acomp_notifier = use_acomp;
 	spec->codec->relaxed_resume = use_acomp;
 	/* reprogram each jack detection logic depending on the notifier */
-	if (spec->use_jack_detect) {
-		for (i = 0; i < spec->num_pins; i++)
-			reprogram_jack_detect(spec->codec,
-					      get_pin(spec, i)->pin_nid,
-					      get_pin(spec, i)->dev_id,
-					      use_acomp);
-	}
+	for (i = 0; i < spec->num_pins; i++)
+		reprogram_jack_detect(spec->codec,
+				      get_pin(spec, i)->pin_nid,
+				      get_pin(spec, i)->dev_id,
+				      use_acomp);
 	mutex_unlock(&spec->bind_lock);
 }
 
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 63e1a56..dc5557d 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -86,6 +86,14 @@ struct alc_spec {
 
 	unsigned int gpio_mute_led_mask;
 	unsigned int gpio_mic_led_mask;
+	unsigned int mute_led_coef_idx;
+	unsigned int mute_led_coefbit_mask;
+	unsigned int mute_led_coefbit_on;
+	unsigned int mute_led_coefbit_off;
+	unsigned int mic_led_coef_idx;
+	unsigned int mic_led_coefbit_mask;
+	unsigned int mic_led_coefbit_on;
+	unsigned int mic_led_coefbit_off;
 
 	hda_nid_t headset_mic_pin;
 	hda_nid_t headphone_mic_pin;
@@ -107,6 +115,7 @@ struct alc_spec {
 	unsigned int done_hp_init:1;
 	unsigned int no_shutup_pins:1;
 	unsigned int ultra_low_power:1;
+	unsigned int has_hs_key:1;
 
 	/* for PLL fix */
 	hda_nid_t pll_nid;
@@ -367,7 +376,9 @@ static void alc_fill_eapd_coef(struct hda_codec *codec)
 	case 0x10ec0215:
 	case 0x10ec0233:
 	case 0x10ec0235:
+	case 0x10ec0236:
 	case 0x10ec0255:
+	case 0x10ec0256:
 	case 0x10ec0257:
 	case 0x10ec0282:
 	case 0x10ec0283:
@@ -379,11 +390,6 @@ static void alc_fill_eapd_coef(struct hda_codec *codec)
 	case 0x10ec0300:
 		alc_update_coef_idx(codec, 0x10, 1<<9, 0);
 		break;
-	case 0x10ec0236:
-	case 0x10ec0256:
-		alc_write_coef_idx(codec, 0x36, 0x5757);
-		alc_update_coef_idx(codec, 0x10, 1<<9, 0);
-		break;
 	case 0x10ec0275:
 		alc_update_coef_idx(codec, 0xe, 0, 1<<0);
 		break;
@@ -2449,6 +2455,7 @@ static const struct snd_pci_quirk alc882_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x1458, 0xa0b8, "Gigabyte AZ370-Gaming", ALC1220_FIXUP_GB_DUAL_CODECS),
 	SND_PCI_QUIRK(0x1458, 0xa0cd, "Gigabyte X570 Aorus Master", ALC1220_FIXUP_CLEVO_P950),
 	SND_PCI_QUIRK(0x1462, 0x1228, "MSI-GP63", ALC1220_FIXUP_CLEVO_P950),
+	SND_PCI_QUIRK(0x1462, 0x1275, "MSI-GL63", ALC1220_FIXUP_CLEVO_P950),
 	SND_PCI_QUIRK(0x1462, 0x1276, "MSI-GL73", ALC1220_FIXUP_CLEVO_P950),
 	SND_PCI_QUIRK(0x1462, 0x1293, "MSI-GP65", ALC1220_FIXUP_CLEVO_P950),
 	SND_PCI_QUIRK(0x1462, 0x7350, "MSI-7350", ALC889_FIXUP_CD),
@@ -2982,6 +2989,107 @@ static int alc269_parse_auto_config(struct hda_codec *codec)
 	return alc_parse_auto_config(codec, alc269_ignore, ssids);
 }
 
+static const struct hda_jack_keymap alc_headset_btn_keymap[] = {
+	{ SND_JACK_BTN_0, KEY_PLAYPAUSE },
+	{ SND_JACK_BTN_1, KEY_VOICECOMMAND },
+	{ SND_JACK_BTN_2, KEY_VOLUMEUP },
+	{ SND_JACK_BTN_3, KEY_VOLUMEDOWN },
+	{}
+};
+
+static void alc_headset_btn_callback(struct hda_codec *codec,
+				     struct hda_jack_callback *jack)
+{
+	int report = 0;
+
+	if (jack->unsol_res & (7 << 13))
+		report |= SND_JACK_BTN_0;
+
+	if (jack->unsol_res  & (1 << 16 | 3 << 8))
+		report |= SND_JACK_BTN_1;
+
+	/* Volume up key */
+	if (jack->unsol_res & (7 << 23))
+		report |= SND_JACK_BTN_2;
+
+	/* Volume down key */
+	if (jack->unsol_res & (7 << 10))
+		report |= SND_JACK_BTN_3;
+
+	jack->jack->button_state = report;
+}
+
+static void alc_disable_headset_jack_key(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+
+	if (!spec->has_hs_key)
+		return;
+
+	switch (codec->core.vendor_id) {
+	case 0x10ec0215:
+	case 0x10ec0225:
+	case 0x10ec0285:
+	case 0x10ec0295:
+	case 0x10ec0289:
+	case 0x10ec0299:
+		alc_write_coef_idx(codec, 0x48, 0x0);
+		alc_update_coef_idx(codec, 0x49, 0x0045, 0x0);
+		alc_update_coef_idx(codec, 0x44, 0x0045 << 8, 0x0);
+		break;
+	case 0x10ec0236:
+	case 0x10ec0256:
+		alc_write_coef_idx(codec, 0x48, 0x0);
+		alc_update_coef_idx(codec, 0x49, 0x0045, 0x0);
+		break;
+	}
+}
+
+static void alc_enable_headset_jack_key(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+
+	if (!spec->has_hs_key)
+		return;
+
+	switch (codec->core.vendor_id) {
+	case 0x10ec0215:
+	case 0x10ec0225:
+	case 0x10ec0285:
+	case 0x10ec0295:
+	case 0x10ec0289:
+	case 0x10ec0299:
+		alc_write_coef_idx(codec, 0x48, 0xd011);
+		alc_update_coef_idx(codec, 0x49, 0x007f, 0x0045);
+		alc_update_coef_idx(codec, 0x44, 0x007f << 8, 0x0045 << 8);
+		break;
+	case 0x10ec0236:
+	case 0x10ec0256:
+		alc_write_coef_idx(codec, 0x48, 0xd011);
+		alc_update_coef_idx(codec, 0x49, 0x007f, 0x0045);
+		break;
+	}
+}
+
+static void alc_fixup_headset_jack(struct hda_codec *codec,
+				    const struct hda_fixup *fix, int action)
+{
+	struct alc_spec *spec = codec->spec;
+
+	switch (action) {
+	case HDA_FIXUP_ACT_PRE_PROBE:
+		spec->has_hs_key = 1;
+		snd_hda_jack_detect_enable_callback(codec, 0x55,
+						    alc_headset_btn_callback);
+		snd_hda_jack_add_kctl(codec, 0x55, "Headset Jack", false,
+				      SND_JACK_HEADSET, alc_headset_btn_keymap);
+		break;
+	case HDA_FIXUP_ACT_INIT:
+		alc_enable_headset_jack_key(codec);
+		break;
+	}
+}
+
 static void alc269vb_toggle_power_output(struct hda_codec *codec, int power_up)
 {
 	alc_update_coef_idx(codec, 0x04, 1 << 11, power_up ? (1 << 11) : 0);
@@ -3269,7 +3377,13 @@ static void alc256_init(struct hda_codec *codec)
 	alc_update_coefex_idx(codec, 0x57, 0x04, 0x0007, 0x4); /* Hight power */
 	alc_update_coefex_idx(codec, 0x53, 0x02, 0x8000, 1 << 15); /* Clear bit */
 	alc_update_coefex_idx(codec, 0x53, 0x02, 0x8000, 0 << 15);
-	alc_update_coef_idx(codec, 0x36, 1 << 13, 1 << 5); /* Switch pcbeep path to Line in path*/
+	/*
+	 * Expose headphone mic (or possibly Line In on some machines) instead
+	 * of PC Beep on 1Ah, and disable 1Ah loopback for all outputs. See
+	 * Documentation/sound/hd-audio/realtek-pc-beep.rst for details of
+	 * this register.
+	 */
+	alc_write_coef_idx(codec, 0x36, 0x5757);
 }
 
 static void alc256_shutup(struct hda_codec *codec)
@@ -3372,6 +3486,8 @@ static void alc225_shutup(struct hda_codec *codec)
 
 	if (!hp_pin)
 		hp_pin = 0x21;
+
+	alc_disable_headset_jack_key(codec);
 	/* 3k pull low control for Headset jack. */
 	alc_update_coef_idx(codec, 0x4a, 0, 3 << 10);
 
@@ -3411,6 +3527,9 @@ static void alc225_shutup(struct hda_codec *codec)
 		alc_update_coef_idx(codec, 0x4a, 3<<4, 2<<4);
 		msleep(30);
 	}
+
+	alc_update_coef_idx(codec, 0x4a, 3 << 10, 0);
+	alc_enable_headset_jack_key(codec);
 }
 
 static void alc_default_init(struct hda_codec *codec)
@@ -4008,6 +4127,12 @@ static void alc269_fixup_hp_gpio_led(struct hda_codec *codec,
 	alc_fixup_hp_gpio_led(codec, action, 0x08, 0x10);
 }
 
+static void alc285_fixup_hp_gpio_led(struct hda_codec *codec,
+				const struct hda_fixup *fix, int action)
+{
+	alc_fixup_hp_gpio_led(codec, action, 0x04, 0x00);
+}
+
 static void alc286_fixup_hp_gpio_led(struct hda_codec *codec,
 				const struct hda_fixup *fix, int action)
 {
@@ -4062,6 +4187,111 @@ static void alc280_fixup_hp_gpio4(struct hda_codec *codec,
 	}
 }
 
+/* update mute-LED according to the speaker mute state via COEF bit */
+static void alc_fixup_mute_led_coefbit_hook(void *private_data, int enabled)
+{
+	struct hda_codec *codec = private_data;
+	struct alc_spec *spec = codec->spec;
+
+	if (spec->mute_led_polarity)
+		enabled = !enabled;
+
+	/* temporarily power up/down for setting COEF bit */
+	enabled ? alc_update_coef_idx(codec, spec->mute_led_coef_idx,
+		spec->mute_led_coefbit_mask, spec->mute_led_coefbit_off) :
+		  alc_update_coef_idx(codec, spec->mute_led_coef_idx,
+		spec->mute_led_coefbit_mask, spec->mute_led_coefbit_on);
+}
+
+static void alc285_fixup_hp_mute_led_coefbit(struct hda_codec *codec,
+					  const struct hda_fixup *fix,
+					  int action)
+{
+	struct alc_spec *spec = codec->spec;
+
+	if (action == HDA_FIXUP_ACT_PRE_PROBE) {
+		spec->mute_led_polarity = 0;
+		spec->mute_led_coef_idx = 0x0b;
+		spec->mute_led_coefbit_mask = 1<<3;
+		spec->mute_led_coefbit_on = 1<<3;
+		spec->mute_led_coefbit_off = 0;
+		spec->gen.vmaster_mute.hook = alc_fixup_mute_led_coefbit_hook;
+		spec->gen.vmaster_mute_enum = 1;
+	}
+}
+
+static void alc236_fixup_hp_mute_led_coefbit(struct hda_codec *codec,
+					  const struct hda_fixup *fix,
+					  int action)
+{
+	struct alc_spec *spec = codec->spec;
+
+	if (action == HDA_FIXUP_ACT_PRE_PROBE) {
+		spec->mute_led_polarity = 0;
+		spec->mute_led_coef_idx = 0x34;
+		spec->mute_led_coefbit_mask = 1<<5;
+		spec->mute_led_coefbit_on = 0;
+		spec->mute_led_coefbit_off = 1<<5;
+		spec->gen.vmaster_mute.hook = alc_fixup_mute_led_coefbit_hook;
+		spec->gen.vmaster_mute_enum = 1;
+	}
+}
+
+/* turn on/off mic-mute LED per capture hook by coef bit */
+static void alc_hp_cap_micmute_update(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+
+	if (spec->gen.micmute_led.led_value)
+		alc_update_coef_idx(codec, spec->mic_led_coef_idx,
+			spec->mic_led_coefbit_mask, spec->mic_led_coefbit_on);
+	else
+		alc_update_coef_idx(codec, spec->mic_led_coef_idx,
+			spec->mic_led_coefbit_mask, spec->mic_led_coefbit_off);
+}
+
+static void alc285_fixup_hp_coef_micmute_led(struct hda_codec *codec,
+				const struct hda_fixup *fix, int action)
+{
+	struct alc_spec *spec = codec->spec;
+
+	if (action == HDA_FIXUP_ACT_PRE_PROBE) {
+		spec->mic_led_coef_idx = 0x19;
+		spec->mic_led_coefbit_mask = 1<<13;
+		spec->mic_led_coefbit_on = 1<<13;
+		spec->mic_led_coefbit_off = 0;
+		snd_hda_gen_add_micmute_led(codec, alc_hp_cap_micmute_update);
+	}
+}
+
+static void alc236_fixup_hp_coef_micmute_led(struct hda_codec *codec,
+				const struct hda_fixup *fix, int action)
+{
+	struct alc_spec *spec = codec->spec;
+
+	if (action == HDA_FIXUP_ACT_PRE_PROBE) {
+		spec->mic_led_coef_idx = 0x35;
+		spec->mic_led_coefbit_mask = 3<<2;
+		spec->mic_led_coefbit_on = 2<<2;
+		spec->mic_led_coefbit_off = 1<<2;
+		snd_hda_gen_add_micmute_led(codec, alc_hp_cap_micmute_update);
+	}
+}
+
+static void alc285_fixup_hp_mute_led(struct hda_codec *codec,
+				const struct hda_fixup *fix, int action)
+{
+	alc285_fixup_hp_mute_led_coefbit(codec, fix, action);
+	alc285_fixup_hp_coef_micmute_led(codec, fix, action);
+}
+
+static void alc236_fixup_hp_mute_led(struct hda_codec *codec,
+				const struct hda_fixup *fix, int action)
+{
+	alc236_fixup_hp_mute_led_coefbit(codec, fix, action);
+	alc236_fixup_hp_coef_micmute_led(codec, fix, action);
+}
+
 #if IS_REACHABLE(CONFIG_INPUT)
 static void gpio2_mic_hotkey_event(struct hda_codec *codec,
 				   struct hda_jack_callback *event)
@@ -5375,17 +5605,6 @@ static void alc271_hp_gate_mic_jack(struct hda_codec *codec,
 	}
 }
 
-static void alc256_fixup_dell_xps_13_headphone_noise2(struct hda_codec *codec,
-						      const struct hda_fixup *fix,
-						      int action)
-{
-	if (action != HDA_FIXUP_ACT_PRE_PROBE)
-		return;
-
-	snd_hda_codec_amp_stereo(codec, 0x1a, HDA_INPUT, 0, HDA_AMP_VOLMASK, 1);
-	snd_hda_override_wcaps(codec, 0x1a, get_wcaps(codec, 0x1a) & ~AC_WCAP_IN_AMP);
-}
-
 static void alc269_fixup_limit_int_mic_boost(struct hda_codec *codec,
 					     const struct hda_fixup *fix,
 					     int action)
@@ -5662,69 +5881,6 @@ static void alc285_fixup_invalidate_dacs(struct hda_codec *codec,
 	snd_hda_override_wcaps(codec, 0x03, 0);
 }
 
-static const struct hda_jack_keymap alc_headset_btn_keymap[] = {
-	{ SND_JACK_BTN_0, KEY_PLAYPAUSE },
-	{ SND_JACK_BTN_1, KEY_VOICECOMMAND },
-	{ SND_JACK_BTN_2, KEY_VOLUMEUP },
-	{ SND_JACK_BTN_3, KEY_VOLUMEDOWN },
-	{}
-};
-
-static void alc_headset_btn_callback(struct hda_codec *codec,
-				     struct hda_jack_callback *jack)
-{
-	int report = 0;
-
-	if (jack->unsol_res & (7 << 13))
-		report |= SND_JACK_BTN_0;
-
-	if (jack->unsol_res  & (1 << 16 | 3 << 8))
-		report |= SND_JACK_BTN_1;
-
-	/* Volume up key */
-	if (jack->unsol_res & (7 << 23))
-		report |= SND_JACK_BTN_2;
-
-	/* Volume down key */
-	if (jack->unsol_res & (7 << 10))
-		report |= SND_JACK_BTN_3;
-
-	jack->jack->button_state = report;
-}
-
-static void alc_fixup_headset_jack(struct hda_codec *codec,
-				    const struct hda_fixup *fix, int action)
-{
-
-	switch (action) {
-	case HDA_FIXUP_ACT_PRE_PROBE:
-		snd_hda_jack_detect_enable_callback(codec, 0x55,
-						    alc_headset_btn_callback);
-		snd_hda_jack_add_kctl(codec, 0x55, "Headset Jack", false,
-				      SND_JACK_HEADSET, alc_headset_btn_keymap);
-		break;
-	case HDA_FIXUP_ACT_INIT:
-		switch (codec->core.vendor_id) {
-		case 0x10ec0215:
-		case 0x10ec0225:
-		case 0x10ec0285:
-		case 0x10ec0295:
-		case 0x10ec0289:
-		case 0x10ec0299:
-			alc_write_coef_idx(codec, 0x48, 0xd011);
-			alc_update_coef_idx(codec, 0x49, 0x007f, 0x0045);
-			alc_update_coef_idx(codec, 0x44, 0x007f << 8, 0x0045 << 8);
-			break;
-		case 0x10ec0236:
-		case 0x10ec0256:
-			alc_write_coef_idx(codec, 0x48, 0xd011);
-			alc_update_coef_idx(codec, 0x49, 0x007f, 0x0045);
-			break;
-		}
-		break;
-	}
-}
-
 static void alc295_fixup_chromebook(struct hda_codec *codec,
 				    const struct hda_fixup *fix, int action)
 {
@@ -5863,8 +6019,6 @@ enum {
 	ALC298_FIXUP_DELL1_MIC_NO_PRESENCE,
 	ALC298_FIXUP_DELL_AIO_MIC_NO_PRESENCE,
 	ALC275_FIXUP_DELL_XPS,
-	ALC256_FIXUP_DELL_XPS_13_HEADPHONE_NOISE,
-	ALC256_FIXUP_DELL_XPS_13_HEADPHONE_NOISE2,
 	ALC293_FIXUP_LENOVO_SPK_NOISE,
 	ALC233_FIXUP_LENOVO_LINE2_MIC_HOTKEY,
 	ALC255_FIXUP_DELL_SPK_NOISE,
@@ -5923,6 +6077,9 @@ enum {
 	ALC294_FIXUP_ASUS_DUAL_SPK,
 	ALC285_FIXUP_THINKPAD_HEADSET_JACK,
 	ALC294_FIXUP_ASUS_HPE,
+	ALC285_FIXUP_HP_GPIO_LED,
+	ALC285_FIXUP_HP_MUTE_LED,
+	ALC236_FIXUP_HP_MUTE_LED,
 };
 
 static const struct hda_fixup alc269_fixups[] = {
@@ -6604,23 +6761,6 @@ static const struct hda_fixup alc269_fixups[] = {
 			{}
 		}
 	},
-	[ALC256_FIXUP_DELL_XPS_13_HEADPHONE_NOISE] = {
-		.type = HDA_FIXUP_VERBS,
-		.v.verbs = (const struct hda_verb[]) {
-			/* Disable pass-through path for FRONT 14h */
-			{0x20, AC_VERB_SET_COEF_INDEX, 0x36},
-			{0x20, AC_VERB_SET_PROC_COEF, 0x1737},
-			{}
-		},
-		.chained = true,
-		.chain_id = ALC255_FIXUP_DELL1_MIC_NO_PRESENCE
-	},
-	[ALC256_FIXUP_DELL_XPS_13_HEADPHONE_NOISE2] = {
-		.type = HDA_FIXUP_FUNC,
-		.v.func = alc256_fixup_dell_xps_13_headphone_noise2,
-		.chained = true,
-		.chain_id = ALC256_FIXUP_DELL_XPS_13_HEADPHONE_NOISE
-	},
 	[ALC293_FIXUP_LENOVO_SPK_NOISE] = {
 		.type = HDA_FIXUP_FUNC,
 		.v.func = alc_fixup_disable_aamix,
@@ -7061,6 +7201,18 @@ static const struct hda_fixup alc269_fixups[] = {
 		.chained = true,
 		.chain_id = ALC294_FIXUP_ASUS_HEADSET_MIC
 	},
+	[ALC285_FIXUP_HP_GPIO_LED] = {
+		.type = HDA_FIXUP_FUNC,
+		.v.func = alc285_fixup_hp_gpio_led,
+	},
+	[ALC285_FIXUP_HP_MUTE_LED] = {
+		.type = HDA_FIXUP_FUNC,
+		.v.func = alc285_fixup_hp_mute_led,
+	},
+	[ALC236_FIXUP_HP_MUTE_LED] = {
+		.type = HDA_FIXUP_FUNC,
+		.v.func = alc236_fixup_hp_mute_led,
+	},
 };
 
 static const struct snd_pci_quirk alc269_fixup_tbl[] = {
@@ -7114,17 +7266,14 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x1028, 0x06de, "Dell", ALC293_FIXUP_DISABLE_AAMIX_MULTIJACK),
 	SND_PCI_QUIRK(0x1028, 0x06df, "Dell", ALC293_FIXUP_DISABLE_AAMIX_MULTIJACK),
 	SND_PCI_QUIRK(0x1028, 0x06e0, "Dell", ALC293_FIXUP_DISABLE_AAMIX_MULTIJACK),
-	SND_PCI_QUIRK(0x1028, 0x0704, "Dell XPS 13 9350", ALC256_FIXUP_DELL_XPS_13_HEADPHONE_NOISE2),
 	SND_PCI_QUIRK(0x1028, 0x0706, "Dell Inspiron 7559", ALC256_FIXUP_DELL_INSPIRON_7559_SUBWOOFER),
 	SND_PCI_QUIRK(0x1028, 0x0725, "Dell Inspiron 3162", ALC255_FIXUP_DELL_SPK_NOISE),
 	SND_PCI_QUIRK(0x1028, 0x0738, "Dell Precision 5820", ALC269_FIXUP_NO_SHUTUP),
-	SND_PCI_QUIRK(0x1028, 0x075b, "Dell XPS 13 9360", ALC256_FIXUP_DELL_XPS_13_HEADPHONE_NOISE2),
 	SND_PCI_QUIRK(0x1028, 0x075c, "Dell XPS 27 7760", ALC298_FIXUP_SPK_VOLUME),
 	SND_PCI_QUIRK(0x1028, 0x075d, "Dell AIO", ALC298_FIXUP_SPK_VOLUME),
 	SND_PCI_QUIRK(0x1028, 0x07b0, "Dell Precision 7520", ALC295_FIXUP_DISABLE_DAC3),
 	SND_PCI_QUIRK(0x1028, 0x0798, "Dell Inspiron 17 7000 Gaming", ALC256_FIXUP_DELL_INSPIRON_7559_SUBWOOFER),
 	SND_PCI_QUIRK(0x1028, 0x080c, "Dell WYSE", ALC225_FIXUP_DELL_WYSE_MIC_NO_PRESENCE),
-	SND_PCI_QUIRK(0x1028, 0x082a, "Dell XPS 13 9360", ALC256_FIXUP_DELL_XPS_13_HEADPHONE_NOISE2),
 	SND_PCI_QUIRK(0x1028, 0x084b, "Dell", ALC274_FIXUP_DELL_AIO_LINEOUT_VERB),
 	SND_PCI_QUIRK(0x1028, 0x084e, "Dell", ALC274_FIXUP_DELL_AIO_LINEOUT_VERB),
 	SND_PCI_QUIRK(0x1028, 0x0871, "Dell Precision 3630", ALC255_FIXUP_DELL_HEADSET_MIC),
@@ -7208,6 +7357,9 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x103c, 0x83b9, "HP Spectre x360", ALC269_FIXUP_HP_MUTE_LED_MIC3),
 	SND_PCI_QUIRK(0x103c, 0x8497, "HP Envy x360", ALC269_FIXUP_HP_MUTE_LED_MIC3),
 	SND_PCI_QUIRK(0x103c, 0x84e7, "HP Pavilion 15", ALC269_FIXUP_HP_MUTE_LED_MIC3),
+	SND_PCI_QUIRK(0x103c, 0x8736, "HP", ALC285_FIXUP_HP_GPIO_LED),
+	SND_PCI_QUIRK(0x103c, 0x877a, "HP", ALC285_FIXUP_HP_MUTE_LED),
+	SND_PCI_QUIRK(0x103c, 0x877d, "HP", ALC236_FIXUP_HP_MUTE_LED),
 	SND_PCI_QUIRK(0x1043, 0x103e, "ASUS X540SA", ALC256_FIXUP_ASUS_MIC),
 	SND_PCI_QUIRK(0x1043, 0x103f, "ASUS TX300", ALC282_FIXUP_ASUS_TX300),
 	SND_PCI_QUIRK(0x1043, 0x106d, "Asus K53BE", ALC269_FIXUP_LIMIT_INT_MIC_BOOST),
@@ -7226,6 +7378,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x1043, 0x16e3, "ASUS UX50", ALC269_FIXUP_STEREO_DMIC),
 	SND_PCI_QUIRK(0x1043, 0x17d1, "ASUS UX431FL", ALC294_FIXUP_ASUS_DUAL_SPK),
 	SND_PCI_QUIRK(0x1043, 0x18b1, "Asus MJ401TA", ALC256_FIXUP_ASUS_HEADSET_MIC),
+	SND_PCI_QUIRK(0x1043, 0x18f1, "Asus FX505DT", ALC256_FIXUP_ASUS_HEADSET_MIC),
 	SND_PCI_QUIRK(0x1043, 0x19ce, "ASUS B9450FA", ALC294_FIXUP_ASUS_HPE),
 	SND_PCI_QUIRK(0x1043, 0x1a13, "Asus G73Jw", ALC269_FIXUP_ASUS_G73JW),
 	SND_PCI_QUIRK(0x1043, 0x1a30, "ASUS X705UD", ALC256_FIXUP_ASUS_MIC),
@@ -7299,6 +7452,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x17aa, 0x225d, "Thinkpad T480", ALC269_FIXUP_LIMIT_INT_MIC_BOOST),
 	SND_PCI_QUIRK(0x17aa, 0x2292, "Thinkpad X1 Yoga 7th", ALC285_FIXUP_THINKPAD_HEADSET_JACK),
 	SND_PCI_QUIRK(0x17aa, 0x2293, "Thinkpad X1 Carbon 7th", ALC285_FIXUP_THINKPAD_HEADSET_JACK),
+	SND_PCI_QUIRK(0x17aa, 0x22be, "Thinkpad X1 Carbon 8th", ALC285_FIXUP_THINKPAD_HEADSET_JACK),
 	SND_PCI_QUIRK(0x17aa, 0x30bb, "ThinkCentre AIO", ALC233_FIXUP_LENOVO_LINE2_MIC_HOTKEY),
 	SND_PCI_QUIRK(0x17aa, 0x30e2, "ThinkCentre AIO", ALC233_FIXUP_LENOVO_LINE2_MIC_HOTKEY),
 	SND_PCI_QUIRK(0x17aa, 0x310c, "ThinkCentre Station", ALC294_FIXUP_LENOVO_MIC_LOCATION),
@@ -7477,7 +7631,6 @@ static const struct hda_model_fixup alc269_fixup_models[] = {
 	{.id = ALC298_FIXUP_DELL1_MIC_NO_PRESENCE, .name = "alc298-dell1"},
 	{.id = ALC298_FIXUP_DELL_AIO_MIC_NO_PRESENCE, .name = "alc298-dell-aio"},
 	{.id = ALC275_FIXUP_DELL_XPS, .name = "alc275-dell-xps"},
-	{.id = ALC256_FIXUP_DELL_XPS_13_HEADPHONE_NOISE, .name = "alc256-dell-xps13"},
 	{.id = ALC293_FIXUP_LENOVO_SPK_NOISE, .name = "lenovo-spk-noise"},
 	{.id = ALC233_FIXUP_LENOVO_LINE2_MIC_HOTKEY, .name = "lenovo-hotkey"},
 	{.id = ALC255_FIXUP_DELL_SPK_NOISE, .name = "dell-spk-noise"},
diff --git a/sound/pci/ice1712/prodigy_hifi.c b/sound/pci/ice1712/prodigy_hifi.c
index 91f83ce..9aa12a6 100644
--- a/sound/pci/ice1712/prodigy_hifi.c
+++ b/sound/pci/ice1712/prodigy_hifi.c
@@ -536,7 +536,7 @@ static int wm_adc_mux_enum_get(struct snd_kcontrol *kcontrol,
 	struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
 
 	mutex_lock(&ice->gpio_mutex);
-	ucontrol->value.integer.value[0] = wm_get(ice, WM_ADC_MUX) & 0x1f;
+	ucontrol->value.enumerated.item[0] = wm_get(ice, WM_ADC_MUX) & 0x1f;
 	mutex_unlock(&ice->gpio_mutex);
 	return 0;
 }
@@ -550,7 +550,7 @@ static int wm_adc_mux_enum_put(struct snd_kcontrol *kcontrol,
 
 	mutex_lock(&ice->gpio_mutex);
 	oval = wm_get(ice, WM_ADC_MUX);
-	nval = (oval & 0xe0) | ucontrol->value.integer.value[0];
+	nval = (oval & 0xe0) | ucontrol->value.enumerated.item[0];
 	if (nval != oval) {
 		wm_put(ice, WM_ADC_MUX, nval);
 		change = 1;
diff --git a/sound/pci/korg1212/korg1212.c b/sound/pci/korg1212/korg1212.c
index 21ab9cc..65a887b 100644
--- a/sound/pci/korg1212/korg1212.c
+++ b/sound/pci/korg1212/korg1212.c
@@ -30,7 +30,7 @@
 #if K1212_DEBUG_LEVEL > 0
 #define K1212_DEBUG_PRINTK(fmt,args...)	printk(KERN_DEBUG fmt,##args)
 #else
-#define K1212_DEBUG_PRINTK(fmt,...)
+#define K1212_DEBUG_PRINTK(fmt,...)	do { } while (0)
 #endif
 #if K1212_DEBUG_LEVEL > 1
 #define K1212_DEBUG_PRINTK_VERBOSE(fmt,args...)	printk(KERN_DEBUG fmt,##args)
diff --git a/sound/pci/rme9652/hdsp.c b/sound/pci/rme9652/hdsp.c
index cc06f0a..227aece 100644
--- a/sound/pci/rme9652/hdsp.c
+++ b/sound/pci/rme9652/hdsp.c
@@ -3353,7 +3353,8 @@ snd_hdsp_proc_read(struct snd_info_entry *entry, struct snd_info_buffer *buffer)
 				return;
 			}
 		} else {
-			int err = -EINVAL;
+			int err;
+
 			err = hdsp_request_fw_loader(hdsp);
 			if (err < 0) {
 				snd_iprintf(buffer,
diff --git a/sound/pci/via82xx.c b/sound/pci/via82xx.c
index 799789c..8b03e2d 100644
--- a/sound/pci/via82xx.c
+++ b/sound/pci/via82xx.c
@@ -414,6 +414,7 @@ static int build_via_table(struct viadev *dev, struct snd_pcm_substream *substre
 {
 	unsigned int i, idx, ofs, rest;
 	struct via82xx *chip = snd_pcm_substream_chip(substream);
+	__le32 *pgtbl;
 
 	if (dev->table.area == NULL) {
 		/* the start of each lists must be aligned to 8 bytes,
@@ -435,6 +436,7 @@ static int build_via_table(struct viadev *dev, struct snd_pcm_substream *substre
 	/* fill the entries */
 	idx = 0;
 	ofs = 0;
+	pgtbl = (__le32 *)dev->table.area;
 	for (i = 0; i < periods; i++) {
 		rest = fragsize;
 		/* fill descriptors for a period.
@@ -451,7 +453,7 @@ static int build_via_table(struct viadev *dev, struct snd_pcm_substream *substre
 				return -EINVAL;
 			}
 			addr = snd_pcm_sgbuf_get_addr(substream, ofs);
-			((u32 *)dev->table.area)[idx << 1] = cpu_to_le32(addr);
+			pgtbl[idx << 1] = cpu_to_le32(addr);
 			r = snd_pcm_sgbuf_get_chunk_size(substream, ofs, rest);
 			rest -= r;
 			if (! rest) {
@@ -466,7 +468,7 @@ static int build_via_table(struct viadev *dev, struct snd_pcm_substream *substre
 				"tbl %d: at %d  size %d (rest %d)\n",
 				idx, ofs, r, rest);
 			*/
-			((u32 *)dev->table.area)[(idx<<1) + 1] = cpu_to_le32(r | flag);
+			pgtbl[(idx<<1) + 1] = cpu_to_le32(r | flag);
 			dev->idx_table[idx].offset = ofs;
 			dev->idx_table[idx].size = r;
 			ofs += r;
diff --git a/sound/pci/via82xx_modem.c b/sound/pci/via82xx_modem.c
index 84e5898..607b710 100644
--- a/sound/pci/via82xx_modem.c
+++ b/sound/pci/via82xx_modem.c
@@ -267,6 +267,7 @@ static int build_via_table(struct viadev *dev, struct snd_pcm_substream *substre
 {
 	unsigned int i, idx, ofs, rest;
 	struct via82xx_modem *chip = snd_pcm_substream_chip(substream);
+	__le32 *pgtbl;
 
 	if (dev->table.area == NULL) {
 		/* the start of each lists must be aligned to 8 bytes,
@@ -288,6 +289,7 @@ static int build_via_table(struct viadev *dev, struct snd_pcm_substream *substre
 	/* fill the entries */
 	idx = 0;
 	ofs = 0;
+	pgtbl = (__le32 *)dev->table.area;
 	for (i = 0; i < periods; i++) {
 		rest = fragsize;
 		/* fill descriptors for a period.
@@ -304,7 +306,7 @@ static int build_via_table(struct viadev *dev, struct snd_pcm_substream *substre
 				return -EINVAL;
 			}
 			addr = snd_pcm_sgbuf_get_addr(substream, ofs);
-			((u32 *)dev->table.area)[idx << 1] = cpu_to_le32(addr);
+			pgtbl[idx << 1] = cpu_to_le32(addr);
 			r = PAGE_SIZE - (ofs % PAGE_SIZE);
 			if (rest < r)
 				r = rest;
@@ -321,7 +323,7 @@ static int build_via_table(struct viadev *dev, struct snd_pcm_substream *substre
 				"tbl %d: at %d  size %d (rest %d)\n",
 				idx, ofs, r, rest);
 			*/
-			((u32 *)dev->table.area)[(idx<<1) + 1] = cpu_to_le32(r | flag);
+			pgtbl[(idx<<1) + 1] = cpu_to_le32(r | flag);
 			dev->idx_table[idx].offset = ofs;
 			dev->idx_table[idx].size = r;
 			ofs += r;
diff --git a/sound/ppc/keywest.c b/sound/ppc/keywest.c
index 093806d..9554a0c 100644
--- a/sound/ppc/keywest.c
+++ b/sound/ppc/keywest.c
@@ -40,6 +40,7 @@ static int keywest_probe(struct i2c_client *client,
 static int keywest_attach_adapter(struct i2c_adapter *adapter)
 {
 	struct i2c_board_info info;
+	struct i2c_client *client;
 
 	if (! keywest_ctx)
 		return -EINVAL;
@@ -50,9 +51,11 @@ static int keywest_attach_adapter(struct i2c_adapter *adapter)
 	memset(&info, 0, sizeof(struct i2c_board_info));
 	strlcpy(info.type, "keywest", I2C_NAME_SIZE);
 	info.addr = keywest_ctx->addr;
-	keywest_ctx->client = i2c_new_device(adapter, &info);
-	if (!keywest_ctx->client)
-		return -ENODEV;
+	client = i2c_new_client_device(adapter, &info);
+	if (IS_ERR(client))
+		return PTR_ERR(client);
+	keywest_ctx->client = client;
+
 	/*
 	 * We know the driver is already loaded, so the device should be
 	 * already bound. If not it means binding failed, and then there
diff --git a/sound/soc/amd/Kconfig b/sound/soc/amd/Kconfig
index 5f40517..bce4cee 100644
--- a/sound/soc/amd/Kconfig
+++ b/sound/soc/amd/Kconfig
@@ -26,3 +26,13 @@
 	depends on X86 && PCI
 	help
 	 This option enables ACP v3.x I2S support on AMD platform
+
+config SND_SOC_AMD_RV_RT5682_MACH
+	tristate "AMD RV support for RT5682"
+	select SND_SOC_RT5682
+	select SND_SOC_MAX98357A
+	select SND_SOC_CROS_EC_CODEC
+	select I2C_CROS_EC_TUNNEL
+	depends on SND_SOC_AMD_ACP3x && I2C && CROS_EC
+	help
+	 This option enables machine driver for RT5682 and MAX9835.
diff --git a/sound/soc/amd/Makefile b/sound/soc/amd/Makefile
index c4ddc6a..e6f3d9b 100644
--- a/sound/soc/amd/Makefile
+++ b/sound/soc/amd/Makefile
@@ -2,8 +2,10 @@
 acp_audio_dma-objs := acp-pcm-dma.o
 snd-soc-acp-da7219mx98357-mach-objs := acp-da7219-max98357a.o
 snd-soc-acp-rt5645-mach-objs := acp-rt5645.o
+snd-soc-acp-rt5682-mach-objs := acp3x-rt5682-max9836.o
 
 obj-$(CONFIG_SND_SOC_AMD_ACP) += acp_audio_dma.o
 obj-$(CONFIG_SND_SOC_AMD_CZ_DA7219MX98357_MACH) += snd-soc-acp-da7219mx98357-mach.o
 obj-$(CONFIG_SND_SOC_AMD_CZ_RT5645_MACH) += snd-soc-acp-rt5645-mach.o
 obj-$(CONFIG_SND_SOC_AMD_ACP3x) += raven/
+obj-$(CONFIG_SND_SOC_AMD_RV_RT5682_MACH) += snd-soc-acp-rt5682-mach.o
diff --git a/sound/soc/amd/acp-da7219-max98357a.c b/sound/soc/amd/acp-da7219-max98357a.c
index 7a5621e..9414d726 100644
--- a/sound/soc/amd/acp-da7219-max98357a.c
+++ b/sound/soc/amd/acp-da7219-max98357a.c
@@ -54,7 +54,7 @@ static int cz_da7219_init(struct snd_soc_pcm_runtime *rtd)
 {
 	int ret;
 	struct snd_soc_card *card = rtd->card;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	struct snd_soc_component *component = codec_dai->component;
 
 	dev_info(rtd->dev, "codec dai name = %s\n", codec_dai->name);
diff --git a/sound/soc/amd/acp-rt5645.c b/sound/soc/amd/acp-rt5645.c
index 91abeb9..73b31f8 100644
--- a/sound/soc/amd/acp-rt5645.c
+++ b/sound/soc/amd/acp-rt5645.c
@@ -48,7 +48,7 @@ static int cz_aif1_hw_params(struct snd_pcm_substream *substream,
 {
 	int ret = 0;
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 
 	ret = snd_soc_dai_set_pll(codec_dai, 0, RT5645_PLL1_S_MCLK,
 				  CZ_PLAT_CLK, params_rate(params) * 512);
@@ -73,7 +73,7 @@ static int cz_init(struct snd_soc_pcm_runtime *rtd)
 	struct snd_soc_card *card;
 	struct snd_soc_component *codec;
 
-	codec = rtd->codec_dai->component;
+	codec = asoc_rtd_to_codec(rtd, 0)->component;
 	card = rtd->card;
 
 	ret = snd_soc_card_jack_new(card, "Headset Jack",
diff --git a/sound/soc/amd/acp3x-rt5682-max9836.c b/sound/soc/amd/acp3x-rt5682-max9836.c
new file mode 100644
index 0000000..024a7ee
--- /dev/null
+++ b/sound/soc/amd/acp3x-rt5682-max9836.c
@@ -0,0 +1,376 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Machine driver for AMD ACP Audio engine using DA7219 & MAX98357 codec.
+//
+//Copyright 2016 Advanced Micro Devices, Inc.
+
+#include <sound/core.h>
+#include <sound/soc.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc-dapm.h>
+#include <sound/jack.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/acpi.h>
+
+#include "raven/acp3x.h"
+#include "../codecs/rt5682.h"
+
+#define PCO_PLAT_CLK 48000000
+#define RT5682_PLL_FREQ (48000 * 512)
+#define DUAL_CHANNEL		2
+
+static struct snd_soc_jack pco_jack;
+static struct clk *rt5682_dai_wclk;
+static struct clk *rt5682_dai_bclk;
+static struct gpio_desc *dmic_sel;
+
+static int acp3x_5682_init(struct snd_soc_pcm_runtime *rtd)
+{
+	int ret;
+	struct snd_soc_card *card = rtd->card;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_component *component = codec_dai->component;
+
+	dev_info(rtd->dev, "codec dai name = %s\n", codec_dai->name);
+
+	/* set rt5682 dai fmt */
+	ret =  snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S
+			| SND_SOC_DAIFMT_NB_NF
+			| SND_SOC_DAIFMT_CBM_CFM);
+	if (ret < 0) {
+		dev_err(rtd->card->dev,
+				"Failed to set rt5682 dai fmt: %d\n", ret);
+		return ret;
+	}
+
+	/* set codec PLL */
+	ret = snd_soc_dai_set_pll(codec_dai, RT5682_PLL2, RT5682_PLL2_S_MCLK,
+				  PCO_PLAT_CLK, RT5682_PLL_FREQ);
+	if (ret < 0) {
+		dev_err(rtd->dev, "can't set rt5682 PLL: %d\n", ret);
+		return ret;
+	}
+
+	/* Set codec sysclk */
+	ret = snd_soc_dai_set_sysclk(codec_dai, RT5682_SCLK_S_PLL2,
+			RT5682_PLL_FREQ, SND_SOC_CLOCK_IN);
+	if (ret < 0) {
+		dev_err(rtd->dev,
+			"Failed to set rt5682 SYSCLK: %d\n", ret);
+		return ret;
+	}
+
+	/* Set tdm/i2s1 master bclk ratio */
+	ret = snd_soc_dai_set_bclk_ratio(codec_dai, 64);
+	if (ret < 0) {
+		dev_err(rtd->dev,
+			"Failed to set rt5682 tdm bclk ratio: %d\n", ret);
+		return ret;
+	}
+
+	rt5682_dai_wclk = clk_get(component->dev, "rt5682-dai-wclk");
+	rt5682_dai_bclk = clk_get(component->dev, "rt5682-dai-bclk");
+
+	ret = snd_soc_card_jack_new(card, "Headset Jack",
+				SND_JACK_HEADSET | SND_JACK_LINEOUT |
+				SND_JACK_BTN_0 | SND_JACK_BTN_1 |
+				SND_JACK_BTN_2 | SND_JACK_BTN_3,
+				&pco_jack, NULL, 0);
+	if (ret) {
+		dev_err(card->dev, "HP jack creation failed %d\n", ret);
+		return ret;
+	}
+
+	snd_jack_set_key(pco_jack.jack, SND_JACK_BTN_0, KEY_PLAYPAUSE);
+	snd_jack_set_key(pco_jack.jack, SND_JACK_BTN_1, KEY_VOLUMEUP);
+	snd_jack_set_key(pco_jack.jack, SND_JACK_BTN_2, KEY_VOLUMEDOWN);
+	snd_jack_set_key(pco_jack.jack, SND_JACK_BTN_3, KEY_VOICECOMMAND);
+
+	ret = snd_soc_component_set_jack(component, &pco_jack, NULL);
+	if (ret) {
+		dev_err(rtd->dev, "Headset Jack call-back failed: %d\n", ret);
+		return ret;
+	}
+
+	return ret;
+}
+
+static int rt5682_clk_enable(struct snd_pcm_substream *substream)
+{
+	int ret = 0;
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+
+	/* RT5682 will support only 48K output with 48M mclk */
+	clk_set_rate(rt5682_dai_wclk, 48000);
+	clk_set_rate(rt5682_dai_bclk, 48000 * 64);
+	ret = clk_prepare_enable(rt5682_dai_wclk);
+	if (ret < 0) {
+		dev_err(rtd->dev, "can't enable wclk %d\n", ret);
+		return ret;
+	}
+
+	return ret;
+}
+
+static void rt5682_clk_disable(void)
+{
+	clk_disable_unprepare(rt5682_dai_wclk);
+}
+
+static const unsigned int channels[] = {
+	DUAL_CHANNEL,
+};
+
+static const unsigned int rates[] = {
+	48000,
+};
+
+static const struct snd_pcm_hw_constraint_list constraints_rates = {
+	.count = ARRAY_SIZE(rates),
+	.list  = rates,
+	.mask = 0,
+};
+
+static const struct snd_pcm_hw_constraint_list constraints_channels = {
+	.count = ARRAY_SIZE(channels),
+	.list = channels,
+	.mask = 0,
+};
+
+static int acp3x_5682_startup(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_card *card = rtd->card;
+	struct acp3x_platform_info *machine = snd_soc_card_get_drvdata(card);
+
+	machine->play_i2s_instance = I2S_SP_INSTANCE;
+	machine->cap_i2s_instance = I2S_SP_INSTANCE;
+
+	runtime->hw.channels_max = DUAL_CHANNEL;
+	snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS,
+				   &constraints_channels);
+	snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_RATE,
+				   &constraints_rates);
+	return rt5682_clk_enable(substream);
+}
+
+static int acp3x_max_startup(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_card *card = rtd->card;
+	struct acp3x_platform_info *machine = snd_soc_card_get_drvdata(card);
+
+	machine->play_i2s_instance = I2S_BT_INSTANCE;
+
+	runtime->hw.channels_max = DUAL_CHANNEL;
+	snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS,
+				   &constraints_channels);
+	snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_RATE,
+				   &constraints_rates);
+	return rt5682_clk_enable(substream);
+}
+
+static int acp3x_ec_dmic0_startup(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_card *card = rtd->card;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct acp3x_platform_info *machine = snd_soc_card_get_drvdata(card);
+
+	machine->cap_i2s_instance = I2S_BT_INSTANCE;
+	snd_soc_dai_set_bclk_ratio(codec_dai, 64);
+	if (dmic_sel)
+		gpiod_set_value(dmic_sel, 0);
+
+	return rt5682_clk_enable(substream);
+}
+
+static int acp3x_ec_dmic1_startup(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_card *card = rtd->card;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct acp3x_platform_info *machine = snd_soc_card_get_drvdata(card);
+
+	machine->cap_i2s_instance = I2S_BT_INSTANCE;
+	snd_soc_dai_set_bclk_ratio(codec_dai, 64);
+	if (dmic_sel)
+		gpiod_set_value(dmic_sel, 1);
+
+	return rt5682_clk_enable(substream);
+}
+
+static void rt5682_shutdown(struct snd_pcm_substream *substream)
+{
+	rt5682_clk_disable();
+}
+
+static const struct snd_soc_ops acp3x_5682_ops = {
+	.startup = acp3x_5682_startup,
+	.shutdown = rt5682_shutdown,
+};
+
+static const struct snd_soc_ops acp3x_max_play_ops = {
+	.startup = acp3x_max_startup,
+	.shutdown = rt5682_shutdown,
+};
+
+static const struct snd_soc_ops acp3x_ec_cap0_ops = {
+	.startup = acp3x_ec_dmic0_startup,
+	.shutdown = rt5682_shutdown,
+};
+
+static const struct snd_soc_ops acp3x_ec_cap1_ops = {
+	.startup = acp3x_ec_dmic1_startup,
+	.shutdown = rt5682_shutdown,
+};
+
+SND_SOC_DAILINK_DEF(acp3x_i2s,
+	DAILINK_COMP_ARRAY(COMP_CPU("acp3x_i2s_playcap.0")));
+SND_SOC_DAILINK_DEF(acp3x_bt,
+	DAILINK_COMP_ARRAY(COMP_CPU("acp3x_i2s_playcap.2")));
+
+SND_SOC_DAILINK_DEF(rt5682,
+	DAILINK_COMP_ARRAY(COMP_CODEC("i2c-10EC5682:00", "rt5682-aif1")));
+SND_SOC_DAILINK_DEF(max,
+	DAILINK_COMP_ARRAY(COMP_CODEC("MX98357A:00", "HiFi")));
+SND_SOC_DAILINK_DEF(cros_ec,
+	DAILINK_COMP_ARRAY(COMP_CODEC("GOOG0013:00", "EC Codec I2S RX")));
+
+SND_SOC_DAILINK_DEF(platform,
+	DAILINK_COMP_ARRAY(COMP_PLATFORM("acp3x_rv_i2s_dma.0")));
+
+static struct snd_soc_dai_link acp3x_dai_5682_98357[] = {
+	{
+		.name = "acp3x-5682-play",
+		.stream_name = "Playback",
+		.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
+				| SND_SOC_DAIFMT_CBM_CFM,
+		.init = acp3x_5682_init,
+		.dpcm_playback = 1,
+		.dpcm_capture = 1,
+		.ops = &acp3x_5682_ops,
+		SND_SOC_DAILINK_REG(acp3x_i2s, rt5682, platform),
+	},
+	{
+		.name = "acp3x-max98357-play",
+		.stream_name = "HiFi Playback",
+		.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
+				| SND_SOC_DAIFMT_CBM_CFM,
+		.dpcm_playback = 1,
+		.ops = &acp3x_max_play_ops,
+		SND_SOC_DAILINK_REG(acp3x_bt, max, platform),
+	},
+	{
+		.name = "acp3x-ec-dmic0-capture",
+		.stream_name = "Capture DMIC0",
+		.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
+				| SND_SOC_DAIFMT_CBS_CFS,
+		.dpcm_capture = 1,
+		.ops = &acp3x_ec_cap0_ops,
+		SND_SOC_DAILINK_REG(acp3x_bt, cros_ec, platform),
+	},
+	{
+		.name = "acp3x-ec-dmic1-capture",
+		.stream_name = "Capture DMIC1",
+		.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
+				| SND_SOC_DAIFMT_CBS_CFS,
+		.dpcm_capture = 1,
+		.ops = &acp3x_ec_cap1_ops,
+		SND_SOC_DAILINK_REG(acp3x_bt, cros_ec, platform),
+	},
+};
+
+static const struct snd_soc_dapm_widget acp3x_widgets[] = {
+	SND_SOC_DAPM_HP("Headphone Jack", NULL),
+	SND_SOC_DAPM_SPK("Spk", NULL),
+	SND_SOC_DAPM_MIC("Headset Mic", NULL),
+};
+
+static const struct snd_soc_dapm_route acp3x_audio_route[] = {
+	{"Headphone Jack", NULL, "HPOL"},
+	{"Headphone Jack", NULL, "HPOR"},
+	{"IN1P", NULL, "Headset Mic"},
+	{"Spk", NULL, "Speaker"},
+};
+
+static const struct snd_kcontrol_new acp3x_mc_controls[] = {
+	SOC_DAPM_PIN_SWITCH("Headphone Jack"),
+	SOC_DAPM_PIN_SWITCH("Spk"),
+	SOC_DAPM_PIN_SWITCH("Headset Mic"),
+};
+
+static struct snd_soc_card acp3x_card = {
+	.name = "acp3xalc5682m98357",
+	.owner = THIS_MODULE,
+	.dai_link = acp3x_dai_5682_98357,
+	.num_links = ARRAY_SIZE(acp3x_dai_5682_98357),
+	.dapm_widgets = acp3x_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(acp3x_widgets),
+	.dapm_routes = acp3x_audio_route,
+	.num_dapm_routes = ARRAY_SIZE(acp3x_audio_route),
+	.controls = acp3x_mc_controls,
+	.num_controls = ARRAY_SIZE(acp3x_mc_controls),
+};
+
+static int acp3x_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct snd_soc_card *card;
+	struct acp3x_platform_info *machine;
+
+	machine = devm_kzalloc(&pdev->dev, sizeof(*machine), GFP_KERNEL);
+	if (!machine)
+		return -ENOMEM;
+
+	card = &acp3x_card;
+	acp3x_card.dev = &pdev->dev;
+	platform_set_drvdata(pdev, card);
+	snd_soc_card_set_drvdata(card, machine);
+
+	dmic_sel = devm_gpiod_get(&pdev->dev, "dmic", GPIOD_OUT_LOW);
+	if (IS_ERR(dmic_sel)) {
+		dev_err(&pdev->dev, "DMIC gpio failed err=%ld\n",
+			PTR_ERR(dmic_sel));
+		return PTR_ERR(dmic_sel);
+	}
+
+	ret = devm_snd_soc_register_card(&pdev->dev, &acp3x_card);
+	if (ret) {
+		dev_err(&pdev->dev,
+				"devm_snd_soc_register_card(%s) failed: %d\n",
+				acp3x_card.name, ret);
+		return ret;
+	}
+	return 0;
+}
+
+static const struct acpi_device_id acp3x_audio_acpi_match[] = {
+	{ "AMDI5682", 0 },
+	{},
+};
+MODULE_DEVICE_TABLE(acpi, acp3x_audio_acpi_match);
+
+static struct platform_driver acp3x_audio = {
+	.driver = {
+		.name = "acp3x-alc5682-max98357",
+		.acpi_match_table = ACPI_PTR(acp3x_audio_acpi_match),
+		.pm = &snd_soc_pm_ops,
+	},
+	.probe = acp3x_probe,
+};
+
+module_platform_driver(acp3x_audio);
+
+MODULE_AUTHOR("akshu.agrawal@amd.com");
+MODULE_DESCRIPTION("ALC5682 & MAX98357 audio support");
+MODULE_LICENSE("GPL v2");
diff --git a/sound/soc/amd/raven/acp3x-i2s.c b/sound/soc/amd/raven/acp3x-i2s.c
index 91a3881..f160d35 100644
--- a/sound/soc/amd/raven/acp3x-i2s.c
+++ b/sound/soc/amd/raven/acp3x-i2s.c
@@ -42,7 +42,7 @@ static int acp3x_i2s_set_tdm_slot(struct snd_soc_dai *cpu_dai,
 		u32 tx_mask, u32 rx_mask, int slots, int slot_width)
 {
 	struct i2s_dev_data *adata;
-	u32 val, reg_val, frmt_reg, frm_len;
+	u32 frm_len;
 	u16 slot_len;
 
 	adata = snd_soc_dai_get_drvdata(cpu_dai);
@@ -64,36 +64,7 @@ static int acp3x_i2s_set_tdm_slot(struct snd_soc_dai *cpu_dai,
 	default:
 		return -EINVAL;
 	}
-
-	/* Enable I2S/BT channels TDM, respective TX/RX frame lengths.*/
-
 	frm_len = FRM_LEN | (slots << 15) | (slot_len << 18);
-	if (adata->substream_type == SNDRV_PCM_STREAM_PLAYBACK) {
-		switch (adata->i2s_instance) {
-		case I2S_BT_INSTANCE:
-			reg_val = mmACP_BTTDM_ITER;
-			frmt_reg = mmACP_BTTDM_TXFRMT;
-			break;
-		case I2S_SP_INSTANCE:
-		default:
-			reg_val = mmACP_I2STDM_ITER;
-			frmt_reg = mmACP_I2STDM_TXFRMT;
-		}
-	} else {
-		switch (adata->i2s_instance) {
-		case I2S_BT_INSTANCE:
-			reg_val = mmACP_BTTDM_IRER;
-			frmt_reg = mmACP_BTTDM_RXFRMT;
-			break;
-		case I2S_SP_INSTANCE:
-		default:
-			reg_val = mmACP_I2STDM_IRER;
-			frmt_reg = mmACP_I2STDM_RXFRMT;
-		}
-	}
-	val = rv_readl(adata->acp3x_base + reg_val);
-	rv_writel(val | 0x2, adata->acp3x_base + reg_val);
-	rv_writel(frm_len, adata->acp3x_base + frmt_reg);
 	adata->tdm_fmt = frm_len;
 	return 0;
 }
@@ -105,12 +76,14 @@ static int acp3x_i2s_hwparams(struct snd_pcm_substream *substream,
 	struct snd_soc_pcm_runtime *prtd;
 	struct snd_soc_card *card;
 	struct acp3x_platform_info *pinfo;
+	struct i2s_dev_data *adata;
 	u32 val;
-	u32 reg_val;
+	u32 reg_val, frmt_reg;
 
 	prtd = substream->private_data;
 	rtd = substream->runtime->private_data;
 	card = prtd->card;
+	adata = snd_soc_dai_get_drvdata(dai);
 	pinfo = snd_soc_card_get_drvdata(card);
 	if (pinfo) {
 		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
@@ -141,22 +114,32 @@ static int acp3x_i2s_hwparams(struct snd_pcm_substream *substream,
 		switch (rtd->i2s_instance) {
 		case I2S_BT_INSTANCE:
 			reg_val = mmACP_BTTDM_ITER;
+			frmt_reg = mmACP_BTTDM_TXFRMT;
 			break;
 		case I2S_SP_INSTANCE:
 		default:
 			reg_val = mmACP_I2STDM_ITER;
+			frmt_reg = mmACP_I2STDM_TXFRMT;
 		}
 	} else {
 		switch (rtd->i2s_instance) {
 		case I2S_BT_INSTANCE:
 			reg_val = mmACP_BTTDM_IRER;
+			frmt_reg = mmACP_BTTDM_RXFRMT;
 			break;
 		case I2S_SP_INSTANCE:
 		default:
 			reg_val = mmACP_I2STDM_IRER;
+			frmt_reg = mmACP_I2STDM_RXFRMT;
 		}
 	}
+	if (adata->tdm_mode) {
+		val = rv_readl(rtd->acp3x_base + reg_val);
+		rv_writel(val | 0x2, rtd->acp3x_base + reg_val);
+		rv_writel(adata->tdm_fmt, rtd->acp3x_base + frmt_reg);
+	}
 	val = rv_readl(rtd->acp3x_base + reg_val);
+	val &= ~ACP3x_ITER_IRER_SAMP_LEN_MASK;
 	val = val | (rtd->xfer_resolution  << 3);
 	rv_writel(val, rtd->acp3x_base + reg_val);
 	return 0;
diff --git a/sound/soc/amd/raven/acp3x-pcm-dma.c b/sound/soc/amd/raven/acp3x-pcm-dma.c
index d62c0d9..e362f0b 100644
--- a/sound/soc/amd/raven/acp3x-pcm-dma.c
+++ b/sound/soc/amd/raven/acp3x-pcm-dma.c
@@ -458,7 +458,8 @@ static int acp3x_resume(struct device *dev)
 			reg_val = mmACP_I2STDM_ITER;
 			frmt_val = mmACP_I2STDM_TXFRMT;
 		}
-	rv_writel((rtd->xfer_resolution  << 3), rtd->acp3x_base + reg_val);
+		rv_writel((rtd->xfer_resolution  << 3),
+			  rtd->acp3x_base + reg_val);
 	}
 	if (adata->capture_stream && adata->capture_stream->runtime) {
 		struct i2s_stream_instance *rtd =
@@ -474,7 +475,8 @@ static int acp3x_resume(struct device *dev)
 			reg_val = mmACP_I2STDM_IRER;
 			frmt_val = mmACP_I2STDM_RXFRMT;
 		}
-	rv_writel((rtd->xfer_resolution  << 3), rtd->acp3x_base + reg_val);
+		rv_writel((rtd->xfer_resolution  << 3),
+			  rtd->acp3x_base + reg_val);
 	}
 	if (adata->tdm_mode == TDM_ENABLE) {
 		rv_writel(adata->tdm_fmt, adata->acp3x_base + frmt_val);
diff --git a/sound/soc/amd/raven/acp3x.h b/sound/soc/amd/raven/acp3x.h
index 21e7ac0..03fe9391 100644
--- a/sound/soc/amd/raven/acp3x.h
+++ b/sound/soc/amd/raven/acp3x.h
@@ -76,6 +76,8 @@
 #define ACP_POWERED_OFF			0x02
 #define ACP_POWER_OFF_IN_PROGRESS	0x03
 
+#define ACP3x_ITER_IRER_SAMP_LEN_MASK	0x38
+
 struct acp3x_platform_info {
 	u16 play_i2s_instance;
 	u16 cap_i2s_instance;
diff --git a/sound/soc/amd/raven/pci-acp3x.c b/sound/soc/amd/raven/pci-acp3x.c
index da60e2e..f25ce50 100644
--- a/sound/soc/amd/raven/pci-acp3x.c
+++ b/sound/soc/amd/raven/pci-acp3x.c
@@ -38,8 +38,13 @@ static int acp3x_power_on(void __iomem *acp3x_base)
 	timeout = 0;
 	while (++timeout < 500) {
 		val = rv_readl(acp3x_base + mmACP_PGFSM_STATUS);
-		if (!val)
+		if (!val) {
+			/* Set PME_EN as after ACP power On,
+			 * PME_EN gets cleared
+			 */
+			rv_writel(0x1, acp3x_base + mmACP_PME_EN);
 			return 0;
+		}
 		udelay(1);
 	}
 	return -ETIMEDOUT;
diff --git a/sound/soc/atmel/atmel-pcm-dma.c b/sound/soc/atmel/atmel-pcm-dma.c
index db67f5b..cb03c4f 100644
--- a/sound/soc/atmel/atmel-pcm-dma.c
+++ b/sound/soc/atmel/atmel-pcm-dma.c
@@ -56,7 +56,7 @@ static void atmel_pcm_dma_irq(u32 ssc_sr,
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct atmel_pcm_dma_params *prtd;
 
-	prtd = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+	prtd = snd_soc_dai_get_dma_data(asoc_rtd_to_cpu(rtd, 0), substream);
 
 	if (ssc_sr & prtd->mask->ssc_error) {
 		if (snd_pcm_running(substream))
@@ -83,7 +83,7 @@ static int atmel_pcm_configure_dma(struct snd_pcm_substream *substream,
 	struct ssc_device *ssc;
 	int ret;
 
-	prtd = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+	prtd = snd_soc_dai_get_dma_data(asoc_rtd_to_cpu(rtd, 0), substream);
 	ssc = prtd->ssc;
 
 	ret = snd_hwparams_to_dma_slave_config(substream, params, slave_config);
diff --git a/sound/soc/atmel/atmel-pcm-pdc.c b/sound/soc/atmel/atmel-pcm-pdc.c
index 59c1331..a8daebc 100644
--- a/sound/soc/atmel/atmel-pcm-pdc.c
+++ b/sound/soc/atmel/atmel-pcm-pdc.c
@@ -213,7 +213,7 @@ static int atmel_pcm_hw_params(struct snd_soc_component *component,
 	snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
 	runtime->dma_bytes = params_buffer_bytes(params);
 
-	prtd->params = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+	prtd->params = snd_soc_dai_get_dma_data(asoc_rtd_to_cpu(rtd, 0), substream);
 	prtd->params->dma_intr_handler = atmel_pcm_dma_irq;
 
 	prtd->dma_buffer = runtime->dma_addr;
diff --git a/sound/soc/atmel/atmel_wm8904.c b/sound/soc/atmel/atmel_wm8904.c
index 776b27d..148c943 100644
--- a/sound/soc/atmel/atmel_wm8904.c
+++ b/sound/soc/atmel/atmel_wm8904.c
@@ -27,7 +27,7 @@ static int atmel_asoc_wm8904_hw_params(struct snd_pcm_substream *substream,
 		struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	int ret;
 
 	ret = snd_soc_dai_set_pll(codec_dai, WM8904_FLL_MCLK, WM8904_FLL_MCLK,
diff --git a/sound/soc/atmel/mchp-i2s-mcc.c b/sound/soc/atmel/mchp-i2s-mcc.c
index befc2a3..3cb6388 100644
--- a/sound/soc/atmel/mchp-i2s-mcc.c
+++ b/sound/soc/atmel/mchp-i2s-mcc.c
@@ -239,10 +239,10 @@ struct mchp_i2s_mcc_dev {
 	unsigned int				frame_length;
 	int					tdm_slots;
 	int					channels;
-	int					gclk_use:1;
-	int					gclk_running:1;
-	int					tx_rdy:1;
-	int					rx_rdy:1;
+	unsigned int				gclk_use:1;
+	unsigned int				gclk_running:1;
+	unsigned int				tx_rdy:1;
+	unsigned int				rx_rdy:1;
 };
 
 static irqreturn_t mchp_i2s_mcc_interrupt(int irq, void *dev_id)
diff --git a/sound/soc/atmel/mikroe-proto.c b/sound/soc/atmel/mikroe-proto.c
index aa6d0d78..f9a85fd 100644
--- a/sound/soc/atmel/mikroe-proto.c
+++ b/sound/soc/atmel/mikroe-proto.c
@@ -21,7 +21,7 @@
 static int snd_proto_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct snd_soc_card *card = rtd->card;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 
 	/* Set proto sysclk */
 	int ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK_XTAL,
diff --git a/sound/soc/atmel/sam9g20_wm8731.c b/sound/soc/atmel/sam9g20_wm8731.c
index b1bef2b..ed1f69b 100644
--- a/sound/soc/atmel/sam9g20_wm8731.c
+++ b/sound/soc/atmel/sam9g20_wm8731.c
@@ -96,7 +96,7 @@ static const struct snd_soc_dapm_route intercon[] = {
  */
 static int at91sam9g20ek_wm8731_init(struct snd_soc_pcm_runtime *rtd)
 {
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	struct device *dev = rtd->dev;
 	int ret;
 
diff --git a/sound/soc/atmel/sam9x5_wm8731.c b/sound/soc/atmel/sam9x5_wm8731.c
index 7822425..9fbc3c1 100644
--- a/sound/soc/atmel/sam9x5_wm8731.c
+++ b/sound/soc/atmel/sam9x5_wm8731.c
@@ -40,7 +40,7 @@ struct sam9x5_drvdata {
  */
 static int sam9x5_wm8731_init(struct snd_soc_pcm_runtime *rtd)
 {
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	struct device *dev = rtd->dev;
 	int ret;
 
diff --git a/sound/soc/au1x/db1200.c b/sound/soc/au1x/db1200.c
index d6b692f..d649037 100644
--- a/sound/soc/au1x/db1200.c
+++ b/sound/soc/au1x/db1200.c
@@ -95,7 +95,7 @@ static struct snd_soc_card db1550_ac97_machine = {
 static int db1200_i2s_startup(struct snd_pcm_substream *substream)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 
 	/* WM8731 has its own 12MHz crystal */
 	snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK_XTAL,
diff --git a/sound/soc/au1x/dbdma2.c b/sound/soc/au1x/dbdma2.c
index 8f855644..e82bbf2 100644
--- a/sound/soc/au1x/dbdma2.c
+++ b/sound/soc/au1x/dbdma2.c
@@ -281,7 +281,7 @@ static int au1xpsc_pcm_open(struct snd_soc_component *component,
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	int stype = substream->stream, *dmaids;
 
-	dmaids = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+	dmaids = snd_soc_dai_get_dma_data(asoc_rtd_to_cpu(rtd, 0), substream);
 	if (!dmaids)
 		return -ENODEV;	/* whoa, has ordering changed? */
 
diff --git a/sound/soc/au1x/dma.c b/sound/soc/au1x/dma.c
index c9a038a..4e246c7 100644
--- a/sound/soc/au1x/dma.c
+++ b/sound/soc/au1x/dma.c
@@ -195,7 +195,7 @@ static int alchemy_pcm_open(struct snd_soc_component *component,
 	int *dmaids, s = substream->stream;
 	char *name;
 
-	dmaids = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+	dmaids = snd_soc_dai_get_dma_data(asoc_rtd_to_cpu(rtd, 0), substream);
 	if (!dmaids)
 		return -ENODEV;	/* whoa, has ordering changed? */
 
diff --git a/sound/soc/au1x/psc-ac97.c b/sound/soc/au1x/psc-ac97.c
index 0227993..05eb369 100644
--- a/sound/soc/au1x/psc-ac97.c
+++ b/sound/soc/au1x/psc-ac97.c
@@ -58,7 +58,7 @@ static struct au1xpsc_audio_data *au1xpsc_ac97_workdata;
 static inline struct au1xpsc_audio_data *ac97_to_pscdata(struct snd_ac97 *x)
 {
 	struct snd_soc_card *c = x->bus->card->private_data;
-	return snd_soc_dai_get_drvdata(c->rtd->cpu_dai);
+	return snd_soc_dai_get_drvdata(c->asoc_rtd_to_cpu(rtd, 0));
 }
 
 #else
diff --git a/sound/soc/bcm/Kconfig b/sound/soc/bcm/Kconfig
index 0037e96..4218057 100644
--- a/sound/soc/bcm/Kconfig
+++ b/sound/soc/bcm/Kconfig
@@ -17,3 +17,12 @@
 	  Cygnus chips (bcm958300, bcm958305, bcm911360)
 
 	  If you don't know what to do here, say N.
+
+config SND_BCM63XX_I2S_WHISTLER
+	tristate "SoC Audio support for the Broadcom BCM63XX I2S module"
+	select REGMAP_MMIO
+	help
+	  Say Y if you want to add support for ASoC audio on Broadcom
+	  DSL/PON chips (bcm63158, bcm63178)
+
+	  If you don't know what to do here, say N
diff --git a/sound/soc/bcm/Makefile b/sound/soc/bcm/Makefile
index b81fa42..7c2d789 100644
--- a/sound/soc/bcm/Makefile
+++ b/sound/soc/bcm/Makefile
@@ -9,3 +9,7 @@
 
 obj-$(CONFIG_SND_SOC_CYGNUS) += snd-soc-cygnus.o
 
+# BCM63XX Platform Support
+snd-soc-63xx-objs := bcm63xx-i2s-whistler.o bcm63xx-pcm-whistler.o
+
+obj-$(CONFIG_SND_BCM63XX_I2S_WHISTLER) += snd-soc-63xx.o
\ No newline at end of file
diff --git a/sound/soc/bcm/bcm63xx-i2s-whistler.c b/sound/soc/bcm/bcm63xx-i2s-whistler.c
new file mode 100644
index 0000000..246a57a
--- /dev/null
+++ b/sound/soc/bcm/bcm63xx-i2s-whistler.c
@@ -0,0 +1,317 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// linux/sound/bcm/bcm63xx-i2s-whistler.c
+// BCM63xx whistler i2s driver
+// Copyright (c) 2020 Broadcom Corporation
+// Author: Kevin-Ke Li <kevin-ke.li@broadcom.com>
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include "bcm63xx-i2s.h"
+
+#define DRV_NAME "brcm-i2s"
+
+static bool brcm_i2s_wr_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case I2S_TX_CFG ... I2S_TX_DESC_IFF_LEN:
+	case I2S_TX_CFG_2 ... I2S_RX_DESC_IFF_LEN:
+	case I2S_RX_CFG_2 ... I2S_REG_MAX:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool brcm_i2s_rd_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case I2S_TX_CFG ... I2S_REG_MAX:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool brcm_i2s_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case I2S_TX_CFG:
+	case I2S_TX_IRQ_CTL:
+	case I2S_TX_DESC_IFF_ADDR:
+	case I2S_TX_DESC_IFF_LEN:
+	case I2S_TX_DESC_OFF_ADDR:
+	case I2S_TX_DESC_OFF_LEN:
+	case I2S_TX_CFG_2:
+	case I2S_RX_CFG:
+	case I2S_RX_IRQ_CTL:
+	case I2S_RX_DESC_OFF_ADDR:
+	case I2S_RX_DESC_OFF_LEN:
+	case I2S_RX_DESC_IFF_LEN:
+	case I2S_RX_DESC_IFF_ADDR:
+	case I2S_RX_CFG_2:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_config brcm_i2s_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.max_register = I2S_REG_MAX,
+	.writeable_reg = brcm_i2s_wr_reg,
+	.readable_reg = brcm_i2s_rd_reg,
+	.volatile_reg = brcm_i2s_volatile_reg,
+	.cache_type = REGCACHE_FLAT,
+};
+
+static int bcm63xx_i2s_hw_params(struct snd_pcm_substream *substream,
+				 struct snd_pcm_hw_params *params,
+				 struct snd_soc_dai *dai)
+{
+	int ret = 0;
+	struct bcm_i2s_priv *i2s_priv = snd_soc_dai_get_drvdata(dai);
+
+	ret = clk_set_rate(i2s_priv->i2s_clk, params_rate(params));
+	if (ret < 0)
+		dev_err(i2s_priv->dev,
+			"Can't set sample rate, err: %d\n", ret);
+
+	return ret;
+}
+
+static int bcm63xx_i2s_startup(struct snd_pcm_substream *substream,
+			       struct snd_soc_dai *dai)
+{
+	unsigned int slavemode;
+	struct bcm_i2s_priv *i2s_priv = snd_soc_dai_get_drvdata(dai);
+	struct regmap *regmap_i2s = i2s_priv->regmap_i2s;
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		regmap_update_bits(regmap_i2s, I2S_TX_CFG,
+				   I2S_TX_OUT_R | I2S_TX_DATA_ALIGNMENT |
+				   I2S_TX_DATA_ENABLE | I2S_TX_CLOCK_ENABLE,
+				   I2S_TX_OUT_R | I2S_TX_DATA_ALIGNMENT |
+				   I2S_TX_DATA_ENABLE | I2S_TX_CLOCK_ENABLE);
+		regmap_write(regmap_i2s, I2S_TX_IRQ_CTL, 0);
+		regmap_write(regmap_i2s, I2S_TX_IRQ_IFF_THLD, 0);
+		regmap_write(regmap_i2s, I2S_TX_IRQ_OFF_THLD, 1);
+
+		/* TX and RX block each have an independent bit to indicate
+		 * if it is generating the clock for the I2S bus. The bus
+		 * clocks need to be generated from either the TX or RX block,
+		 * but not both
+		 */
+		regmap_read(regmap_i2s, I2S_RX_CFG_2, &slavemode);
+		if (slavemode & I2S_RX_SLAVE_MODE_MASK)
+			regmap_update_bits(regmap_i2s, I2S_TX_CFG_2,
+					   I2S_TX_SLAVE_MODE_MASK,
+					   I2S_TX_MASTER_MODE);
+		else
+			regmap_update_bits(regmap_i2s, I2S_TX_CFG_2,
+					   I2S_TX_SLAVE_MODE_MASK,
+					   I2S_TX_SLAVE_MODE);
+	} else {
+		regmap_update_bits(regmap_i2s, I2S_RX_CFG,
+				   I2S_RX_IN_R | I2S_RX_DATA_ALIGNMENT |
+				   I2S_RX_CLOCK_ENABLE,
+				   I2S_RX_IN_R | I2S_RX_DATA_ALIGNMENT |
+				   I2S_RX_CLOCK_ENABLE);
+		regmap_write(regmap_i2s, I2S_RX_IRQ_CTL, 0);
+		regmap_write(regmap_i2s, I2S_RX_IRQ_IFF_THLD, 0);
+		regmap_write(regmap_i2s, I2S_RX_IRQ_OFF_THLD, 1);
+
+		regmap_read(regmap_i2s, I2S_TX_CFG_2, &slavemode);
+		if (slavemode & I2S_TX_SLAVE_MODE_MASK)
+			regmap_update_bits(regmap_i2s, I2S_RX_CFG_2,
+					   I2S_RX_SLAVE_MODE_MASK, 0);
+		else
+			regmap_update_bits(regmap_i2s, I2S_RX_CFG_2,
+					   I2S_RX_SLAVE_MODE_MASK,
+					   I2S_RX_SLAVE_MODE);
+	}
+	return 0;
+}
+
+static void bcm63xx_i2s_shutdown(struct snd_pcm_substream *substream,
+				struct snd_soc_dai *dai)
+{
+	unsigned int enabled, slavemode;
+	struct bcm_i2s_priv *i2s_priv = snd_soc_dai_get_drvdata(dai);
+	struct regmap *regmap_i2s = i2s_priv->regmap_i2s;
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		regmap_update_bits(regmap_i2s, I2S_TX_CFG,
+				   I2S_TX_OUT_R | I2S_TX_DATA_ALIGNMENT |
+				   I2S_TX_DATA_ENABLE | I2S_TX_CLOCK_ENABLE, 0);
+		regmap_write(regmap_i2s, I2S_TX_IRQ_CTL, 1);
+		regmap_write(regmap_i2s, I2S_TX_IRQ_IFF_THLD, 4);
+		regmap_write(regmap_i2s, I2S_TX_IRQ_OFF_THLD, 4);
+
+		regmap_read(regmap_i2s, I2S_TX_CFG_2, &slavemode);
+		slavemode = slavemode & I2S_TX_SLAVE_MODE_MASK;
+		if (!slavemode) {
+			regmap_read(regmap_i2s, I2S_RX_CFG, &enabled);
+			enabled = enabled & I2S_RX_ENABLE_MASK;
+			if (enabled)
+				regmap_update_bits(regmap_i2s, I2S_RX_CFG_2,
+						   I2S_RX_SLAVE_MODE_MASK,
+						   I2S_RX_MASTER_MODE);
+		}
+		regmap_update_bits(regmap_i2s, I2S_TX_CFG_2,
+				   I2S_TX_SLAVE_MODE_MASK,
+				   I2S_TX_SLAVE_MODE);
+	} else {
+		regmap_update_bits(regmap_i2s, I2S_RX_CFG,
+				   I2S_RX_IN_R | I2S_RX_DATA_ALIGNMENT |
+				   I2S_RX_CLOCK_ENABLE, 0);
+		regmap_write(regmap_i2s, I2S_RX_IRQ_CTL, 1);
+		regmap_write(regmap_i2s, I2S_RX_IRQ_IFF_THLD, 4);
+		regmap_write(regmap_i2s, I2S_RX_IRQ_OFF_THLD, 4);
+
+		regmap_read(regmap_i2s, I2S_RX_CFG_2, &slavemode);
+		slavemode = slavemode & I2S_RX_SLAVE_MODE_MASK;
+		if (!slavemode) {
+			regmap_read(regmap_i2s, I2S_TX_CFG, &enabled);
+			enabled = enabled & I2S_TX_ENABLE_MASK;
+			if (enabled)
+				regmap_update_bits(regmap_i2s, I2S_TX_CFG_2,
+						   I2S_TX_SLAVE_MODE_MASK,
+						   I2S_TX_MASTER_MODE);
+		}
+
+		regmap_update_bits(regmap_i2s, I2S_RX_CFG_2,
+				   I2S_RX_SLAVE_MODE_MASK, I2S_RX_SLAVE_MODE);
+	}
+}
+
+static const struct snd_soc_dai_ops bcm63xx_i2s_dai_ops = {
+	.startup = bcm63xx_i2s_startup,
+	.shutdown = bcm63xx_i2s_shutdown,
+	.hw_params = bcm63xx_i2s_hw_params,
+};
+
+static struct snd_soc_dai_driver bcm63xx_i2s_dai = {
+	.name = DRV_NAME,
+	.playback = {
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = SNDRV_PCM_RATE_8000_192000,
+		.formats = SNDRV_PCM_FMTBIT_S32_LE,
+	},
+	.capture = {
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = SNDRV_PCM_RATE_8000_192000,
+		.formats = SNDRV_PCM_FMTBIT_S32_LE,
+	},
+	.ops = &bcm63xx_i2s_dai_ops,
+	.symmetric_rates = 1,
+	.symmetric_channels = 1,
+};
+
+static const struct snd_soc_component_driver bcm63xx_i2s_component = {
+	.name = "bcm63xx",
+};
+
+static int bcm63xx_i2s_dev_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+	void __iomem *regs;
+	struct resource *r_mem, *region;
+	struct bcm_i2s_priv *i2s_priv;
+	struct regmap *regmap_i2s;
+	struct clk *i2s_clk;
+
+	i2s_priv = devm_kzalloc(&pdev->dev, sizeof(*i2s_priv), GFP_KERNEL);
+	if (!i2s_priv)
+		return -ENOMEM;
+
+	i2s_clk = devm_clk_get(&pdev->dev, "i2sclk");
+	if (IS_ERR(i2s_clk)) {
+		dev_err(&pdev->dev, "%s: cannot get a brcm clock: %ld\n",
+					__func__, PTR_ERR(i2s_clk));
+		return PTR_ERR(i2s_clk);
+	}
+
+	r_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!r_mem) {
+		dev_err(&pdev->dev, "Unable to get register resource.\n");
+		return -ENODEV;
+	}
+
+	region = devm_request_mem_region(&pdev->dev, r_mem->start,
+					resource_size(r_mem), DRV_NAME);
+	if (!region) {
+		dev_err(&pdev->dev, "Memory region already claimed\n");
+		return -EBUSY;
+	}
+
+	regs = devm_ioremap_resource(&pdev->dev, r_mem);
+	if (IS_ERR(regs)) {
+		ret = PTR_ERR(regs);
+		return ret;
+	}
+
+	regmap_i2s = devm_regmap_init_mmio(&pdev->dev,
+					regs, &brcm_i2s_regmap_config);
+	if (IS_ERR(regmap_i2s))
+		return PTR_ERR(regmap_i2s);
+
+	regmap_update_bits(regmap_i2s, I2S_MISC_CFG,
+			   I2S_PAD_LVL_LOOP_DIS_MASK,
+			   I2S_PAD_LVL_LOOP_DIS_ENABLE);
+
+	ret = devm_snd_soc_register_component(&pdev->dev,
+					      &bcm63xx_i2s_component,
+					      &bcm63xx_i2s_dai, 1);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register the dai\n");
+		return ret;
+	}
+
+	i2s_priv->dev = &pdev->dev;
+	i2s_priv->i2s_clk = i2s_clk;
+	i2s_priv->regmap_i2s = regmap_i2s;
+	dev_set_drvdata(&pdev->dev, i2s_priv);
+
+	ret = bcm63xx_soc_platform_probe(pdev, i2s_priv);
+	if (ret)
+		dev_err(&pdev->dev, "failed to register the pcm\n");
+
+	return ret;
+}
+
+static int bcm63xx_i2s_dev_remove(struct platform_device *pdev)
+{
+	bcm63xx_soc_platform_remove(pdev);
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id snd_soc_bcm_audio_match[] = {
+	{.compatible = "brcm,bcm63xx-i2s"},
+	{ }
+};
+#endif
+
+static struct platform_driver bcm63xx_i2s_driver = {
+	.driver = {
+		.name = DRV_NAME,
+		.of_match_table = of_match_ptr(snd_soc_bcm_audio_match),
+	},
+	.probe = bcm63xx_i2s_dev_probe,
+	.remove = bcm63xx_i2s_dev_remove,
+};
+
+module_platform_driver(bcm63xx_i2s_driver);
+
+MODULE_AUTHOR("Kevin,Li <kevin-ke.li@broadcom.com>");
+MODULE_DESCRIPTION("Broadcom DSL XPON ASOC I2S Interface");
+MODULE_LICENSE("GPL v2");
diff --git a/sound/soc/bcm/bcm63xx-i2s.h b/sound/soc/bcm/bcm63xx-i2s.h
new file mode 100644
index 0000000..edc328b
--- /dev/null
+++ b/sound/soc/bcm/bcm63xx-i2s.h
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// linux/sound/soc/bcm/bcm63xx-i2s.h
+// Copyright (c) 2020 Broadcom Corporation
+// Author: Kevin-Ke Li <kevin-ke.li@broadcom.com>
+
+#ifndef __BCM63XX_I2S_H
+#define __BCM63XX_I2S_H
+
+#define I2S_DESC_FIFO_DEPTH		8
+#define I2S_MISC_CFG			(0x003C)
+#define I2S_PAD_LVL_LOOP_DIS_MASK	(1 << 2)
+#define I2S_PAD_LVL_LOOP_DIS_ENABLE	I2S_PAD_LVL_LOOP_DIS_MASK
+
+#define I2S_TX_ENABLE_MASK		(1 << 31)
+#define I2S_TX_ENABLE			I2S_TX_ENABLE_MASK
+#define I2S_TX_OUT_R			(1 << 19)
+#define I2S_TX_DATA_ALIGNMENT		(1 << 2)
+#define I2S_TX_DATA_ENABLE		(1 << 1)
+#define I2S_TX_CLOCK_ENABLE		(1 << 0)
+
+#define I2S_TX_DESC_OFF_LEVEL_SHIFT	12
+#define I2S_TX_DESC_OFF_LEVEL_MASK	(0x0F << I2S_TX_DESC_OFF_LEVEL_SHIFT)
+#define I2S_TX_DESC_IFF_LEVEL_SHIFT	8
+#define I2S_TX_DESC_IFF_LEVEL_MASK	(0x0F << I2S_TX_DESC_IFF_LEVEL_SHIFT)
+#define I2S_TX_DESC_OFF_INTR_EN_MSK	(1 << 1)
+#define I2S_TX_DESC_OFF_INTR_EN	I2S_TX_DESC_OFF_INTR_EN_MSK
+
+#define I2S_TX_CFG			(0x0000)
+#define I2S_TX_IRQ_CTL			(0x0004)
+#define I2S_TX_IRQ_EN			(0x0008)
+#define I2S_TX_IRQ_IFF_THLD		(0x000c)
+#define I2S_TX_IRQ_OFF_THLD		(0x0010)
+#define I2S_TX_DESC_IFF_ADDR		(0x0014)
+#define I2S_TX_DESC_IFF_LEN		(0x0018)
+#define I2S_TX_DESC_OFF_ADDR		(0x001C)
+#define I2S_TX_DESC_OFF_LEN		(0x0020)
+#define I2S_TX_CFG_2			(0x0024)
+#define I2S_TX_SLAVE_MODE_SHIFT	13
+#define I2S_TX_SLAVE_MODE_MASK		(1 << I2S_TX_SLAVE_MODE_SHIFT)
+#define I2S_TX_SLAVE_MODE		I2S_TX_SLAVE_MODE_MASK
+#define I2S_TX_MASTER_MODE		0
+#define I2S_TX_INTR_MASK		0x0F
+
+#define I2S_RX_ENABLE_MASK		(1 << 31)
+#define I2S_RX_ENABLE			I2S_RX_ENABLE_MASK
+#define I2S_RX_IN_R			(1 << 19)
+#define I2S_RX_DATA_ALIGNMENT		(1 << 2)
+#define I2S_RX_CLOCK_ENABLE		(1 << 0)
+
+#define I2S_RX_DESC_OFF_LEVEL_SHIFT	12
+#define I2S_RX_DESC_OFF_LEVEL_MASK	(0x0F << I2S_RX_DESC_OFF_LEVEL_SHIFT)
+#define I2S_RX_DESC_IFF_LEVEL_SHIFT	8
+#define I2S_RX_DESC_IFF_LEVEL_MASK	(0x0F << I2S_RX_DESC_IFF_LEVEL_SHIFT)
+#define I2S_RX_DESC_OFF_INTR_EN_MSK	(1 << 1)
+#define I2S_RX_DESC_OFF_INTR_EN	I2S_RX_DESC_OFF_INTR_EN_MSK
+
+#define I2S_RX_CFG			(0x0040) /* 20c0 */
+#define I2S_RX_IRQ_CTL			(0x0044)
+#define I2S_RX_IRQ_EN			(0x0048)
+#define I2S_RX_IRQ_IFF_THLD		(0x004C)
+#define I2S_RX_IRQ_OFF_THLD		(0x0050)
+#define I2S_RX_DESC_IFF_ADDR		(0x0054)
+#define I2S_RX_DESC_IFF_LEN		(0x0058)
+#define I2S_RX_DESC_OFF_ADDR		(0x005C)
+#define I2S_RX_DESC_OFF_LEN		(0x0060)
+#define I2S_RX_CFG_2			(0x0064)
+#define I2S_RX_SLAVE_MODE_SHIFT	13
+#define I2S_RX_SLAVE_MODE_MASK		(1 << I2S_RX_SLAVE_MODE_SHIFT)
+#define I2S_RX_SLAVE_MODE		I2S_RX_SLAVE_MODE_MASK
+#define I2S_RX_MASTER_MODE		0
+#define I2S_RX_INTR_MASK		0x0F
+
+#define I2S_REG_MAX			0x007C
+
+struct bcm_i2s_priv {
+	struct device *dev;
+	struct resource *r_irq;
+	struct regmap *regmap_i2s;
+	struct clk *i2s_clk;
+	struct snd_pcm_substream	*play_substream;
+	struct snd_pcm_substream	*capture_substream;
+	struct i2s_dma_desc *play_dma_desc;
+	struct i2s_dma_desc *capture_dma_desc;
+};
+
+extern int bcm63xx_soc_platform_probe(struct platform_device *pdev,
+				      struct bcm_i2s_priv *i2s_priv);
+extern int bcm63xx_soc_platform_remove(struct platform_device *pdev);
+
+#endif
diff --git a/sound/soc/bcm/bcm63xx-pcm-whistler.c b/sound/soc/bcm/bcm63xx-pcm-whistler.c
new file mode 100644
index 0000000..b7a1efc7
--- /dev/null
+++ b/sound/soc/bcm/bcm63xx-pcm-whistler.c
@@ -0,0 +1,485 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// linux/sound/bcm/bcm63xx-pcm-whistler.c
+// BCM63xx whistler pcm interface
+// Copyright (c) 2020 Broadcom Corporation
+// Author: Kevin-Ke Li <kevin-ke.li@broadcom.com>
+
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <sound/pcm_params.h>
+#include <linux/regmap.h>
+#include <linux/of_device.h>
+#include <sound/soc.h>
+#include "bcm63xx-i2s.h"
+
+
+struct i2s_dma_desc {
+	unsigned char *dma_area;
+	dma_addr_t dma_addr;
+	unsigned int dma_len;
+};
+
+struct bcm63xx_runtime_data {
+	int dma_len;
+	dma_addr_t dma_addr;
+	dma_addr_t dma_addr_next;
+};
+
+static const struct snd_pcm_hardware bcm63xx_pcm_hardware = {
+	.info = SNDRV_PCM_INFO_MMAP |
+		SNDRV_PCM_INFO_MMAP_VALID |
+		SNDRV_PCM_INFO_INTERLEAVED |
+		SNDRV_PCM_INFO_PAUSE |
+		SNDRV_PCM_INFO_RESUME,
+	.formats = SNDRV_PCM_FMTBIT_S32_LE, /* support S32 only */
+	.period_bytes_max = 8192 - 32,
+	.periods_min = 1,
+	.periods_max = PAGE_SIZE/sizeof(struct i2s_dma_desc),
+	.buffer_bytes_max = 128 * 1024,
+	.fifo_size = 32,
+};
+
+static int bcm63xx_pcm_hw_params(struct snd_soc_component *component,
+				 struct snd_pcm_substream *substream,
+				 struct snd_pcm_hw_params *params)
+{
+	struct i2s_dma_desc *dma_desc;
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+
+	snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
+	runtime->dma_bytes = params_buffer_bytes(params);
+
+	dma_desc = kzalloc(sizeof(*dma_desc), GFP_NOWAIT);
+	if (!dma_desc)
+		return -ENOMEM;
+
+	snd_soc_dai_set_dma_data(asoc_rtd_to_cpu(rtd, 0), substream, dma_desc);
+
+	return 0;
+}
+
+static int bcm63xx_pcm_hw_free(struct snd_soc_component *component,
+			struct snd_pcm_substream *substream)
+{
+	struct i2s_dma_desc	*dma_desc;
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+
+	dma_desc = snd_soc_dai_get_dma_data(asoc_rtd_to_cpu(rtd, 0), substream);
+	kfree(dma_desc);
+	snd_pcm_set_runtime_buffer(substream, NULL);
+
+	return 0;
+}
+
+static int bcm63xx_pcm_trigger(struct snd_soc_component *component,
+			       struct snd_pcm_substream *substream, int cmd)
+{
+	int ret = 0;
+	struct snd_soc_pcm_runtime *rtd;
+	struct bcm_i2s_priv *i2s_priv;
+	struct regmap   *regmap_i2s;
+
+	rtd = substream->private_data;
+	i2s_priv = dev_get_drvdata(asoc_rtd_to_cpu(rtd, 0)->dev);
+	regmap_i2s = i2s_priv->regmap_i2s;
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		switch (cmd) {
+		case SNDRV_PCM_TRIGGER_START:
+			regmap_update_bits(regmap_i2s,
+					   I2S_TX_IRQ_EN,
+					   I2S_TX_DESC_OFF_INTR_EN,
+					   I2S_TX_DESC_OFF_INTR_EN);
+			regmap_update_bits(regmap_i2s,
+					   I2S_TX_CFG,
+					   I2S_TX_ENABLE_MASK,
+					   I2S_TX_ENABLE);
+			break;
+		case SNDRV_PCM_TRIGGER_STOP:
+		case SNDRV_PCM_TRIGGER_SUSPEND:
+		case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+			regmap_write(regmap_i2s,
+				     I2S_TX_IRQ_EN,
+				     0);
+			regmap_update_bits(regmap_i2s,
+					   I2S_TX_CFG,
+					   I2S_TX_ENABLE_MASK,
+					   0);
+			break;
+		default:
+			ret = -EINVAL;
+		}
+	} else {
+		switch (cmd) {
+		case SNDRV_PCM_TRIGGER_START:
+			regmap_update_bits(regmap_i2s,
+					   I2S_RX_IRQ_EN,
+					   I2S_RX_DESC_OFF_INTR_EN_MSK,
+					   I2S_RX_DESC_OFF_INTR_EN);
+			regmap_update_bits(regmap_i2s,
+					   I2S_RX_CFG,
+					   I2S_RX_ENABLE_MASK,
+					   I2S_RX_ENABLE);
+			break;
+		case SNDRV_PCM_TRIGGER_STOP:
+		case SNDRV_PCM_TRIGGER_SUSPEND:
+		case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+			regmap_update_bits(regmap_i2s,
+					   I2S_RX_IRQ_EN,
+					   I2S_RX_DESC_OFF_INTR_EN_MSK,
+					   0);
+			regmap_update_bits(regmap_i2s,
+					   I2S_RX_CFG,
+					   I2S_RX_ENABLE_MASK,
+					   0);
+			break;
+		default:
+			ret = -EINVAL;
+		}
+	}
+	return ret;
+}
+
+static int bcm63xx_pcm_prepare(struct snd_soc_component *component,
+			struct snd_pcm_substream *substream)
+{
+	struct i2s_dma_desc	*dma_desc;
+	struct regmap		*regmap_i2s;
+	struct bcm_i2s_priv	*i2s_priv;
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	uint32_t regaddr_desclen, regaddr_descaddr;
+
+	dma_desc = snd_soc_dai_get_dma_data(asoc_rtd_to_cpu(rtd, 0), substream);
+	dma_desc->dma_len  = snd_pcm_lib_period_bytes(substream);
+	dma_desc->dma_addr = runtime->dma_addr;
+	dma_desc->dma_area = runtime->dma_area;
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		regaddr_desclen = I2S_TX_DESC_IFF_LEN;
+		regaddr_descaddr = I2S_TX_DESC_IFF_ADDR;
+	} else {
+		regaddr_desclen = I2S_RX_DESC_IFF_LEN;
+		regaddr_descaddr = I2S_RX_DESC_IFF_ADDR;
+	}
+
+	i2s_priv = dev_get_drvdata(asoc_rtd_to_cpu(rtd, 0)->dev);
+	regmap_i2s = i2s_priv->regmap_i2s;
+
+	regmap_write(regmap_i2s, regaddr_desclen, dma_desc->dma_len);
+	regmap_write(regmap_i2s, regaddr_descaddr, dma_desc->dma_addr);
+
+	return 0;
+}
+
+static snd_pcm_uframes_t
+bcm63xx_pcm_pointer(struct snd_soc_component *component,
+		struct snd_pcm_substream *substream)
+{
+	snd_pcm_uframes_t x;
+	struct bcm63xx_runtime_data *prtd = substream->runtime->private_data;
+
+	if (!prtd->dma_addr_next)
+		prtd->dma_addr_next = substream->runtime->dma_addr;
+
+	x = bytes_to_frames(substream->runtime,
+		prtd->dma_addr_next - substream->runtime->dma_addr);
+
+	return x == substream->runtime->buffer_size ? 0 : x;
+}
+
+static int bcm63xx_pcm_mmap(struct snd_soc_component *component,
+				struct snd_pcm_substream *substream,
+				struct vm_area_struct *vma)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+
+	return  dma_mmap_wc(substream->pcm->card->dev, vma,
+			    runtime->dma_area,
+			    runtime->dma_addr,
+			    runtime->dma_bytes);
+
+}
+
+static int bcm63xx_pcm_open(struct snd_soc_component *component,
+			struct snd_pcm_substream *substream)
+{
+	int ret = 0;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct bcm63xx_runtime_data *prtd;
+
+	runtime->hw = bcm63xx_pcm_hardware;
+	ret = snd_pcm_hw_constraint_step(runtime, 0,
+					 SNDRV_PCM_HW_PARAM_PERIOD_BYTES, 32);
+	if (ret)
+		goto out;
+
+	ret = snd_pcm_hw_constraint_step(runtime, 0,
+					 SNDRV_PCM_HW_PARAM_BUFFER_BYTES, 32);
+	if (ret)
+		goto out;
+
+	ret = snd_pcm_hw_constraint_integer(runtime,
+					    SNDRV_PCM_HW_PARAM_PERIODS);
+	if (ret < 0)
+		goto out;
+
+	ret = -ENOMEM;
+	prtd = kzalloc(sizeof(*prtd), GFP_KERNEL);
+	if (!prtd)
+		goto out;
+
+	runtime->private_data = prtd;
+	return 0;
+out:
+	return ret;
+}
+
+static int bcm63xx_pcm_close(struct snd_soc_component *component,
+			struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct bcm63xx_runtime_data *prtd = runtime->private_data;
+
+	kfree(prtd);
+	return 0;
+}
+
+static irqreturn_t i2s_dma_isr(int irq, void *bcm_i2s_priv)
+{
+	unsigned int availdepth, ifflevel, offlevel, int_status, val_1, val_2;
+	struct bcm63xx_runtime_data *prtd;
+	struct snd_pcm_substream *substream;
+	struct snd_pcm_runtime *runtime;
+	struct regmap *regmap_i2s;
+	struct i2s_dma_desc *dma_desc;
+	struct snd_soc_pcm_runtime *rtd;
+	struct bcm_i2s_priv *i2s_priv;
+
+	i2s_priv = (struct bcm_i2s_priv *)bcm_i2s_priv;
+	regmap_i2s = i2s_priv->regmap_i2s;
+
+	/* rx */
+	regmap_read(regmap_i2s, I2S_RX_IRQ_CTL, &int_status);
+
+	if (int_status & I2S_RX_DESC_OFF_INTR_EN_MSK) {
+		substream = i2s_priv->capture_substream;
+		runtime = substream->runtime;
+		rtd = substream->private_data;
+		prtd = runtime->private_data;
+		dma_desc = snd_soc_dai_get_dma_data(asoc_rtd_to_cpu(rtd, 0), substream);
+
+		offlevel = (int_status & I2S_RX_DESC_OFF_LEVEL_MASK) >>
+			   I2S_RX_DESC_OFF_LEVEL_SHIFT;
+		while (offlevel) {
+			regmap_read(regmap_i2s, I2S_RX_DESC_OFF_ADDR, &val_1);
+			regmap_read(regmap_i2s, I2S_RX_DESC_OFF_LEN, &val_2);
+			offlevel--;
+		}
+		prtd->dma_addr_next = val_1 + val_2;
+		ifflevel = (int_status & I2S_RX_DESC_IFF_LEVEL_MASK) >>
+			   I2S_RX_DESC_IFF_LEVEL_SHIFT;
+
+		availdepth = I2S_DESC_FIFO_DEPTH - ifflevel;
+		while (availdepth) {
+			dma_desc->dma_addr +=
+					snd_pcm_lib_period_bytes(substream);
+			dma_desc->dma_area +=
+					snd_pcm_lib_period_bytes(substream);
+			if (dma_desc->dma_addr - runtime->dma_addr >=
+						runtime->dma_bytes) {
+				dma_desc->dma_addr = runtime->dma_addr;
+				dma_desc->dma_area = runtime->dma_area;
+			}
+
+			prtd->dma_addr = dma_desc->dma_addr;
+			regmap_write(regmap_i2s, I2S_RX_DESC_IFF_LEN,
+				     snd_pcm_lib_period_bytes(substream));
+			regmap_write(regmap_i2s, I2S_RX_DESC_IFF_ADDR,
+				     dma_desc->dma_addr);
+			availdepth--;
+		}
+
+		snd_pcm_period_elapsed(substream);
+
+		/* Clear interrupt by writing 0 */
+		regmap_update_bits(regmap_i2s, I2S_RX_IRQ_CTL,
+				   I2S_RX_INTR_MASK, 0);
+	}
+
+	/* tx */
+	regmap_read(regmap_i2s, I2S_TX_IRQ_CTL, &int_status);
+
+	if (int_status & I2S_TX_DESC_OFF_INTR_EN_MSK) {
+		substream = i2s_priv->play_substream;
+		runtime = substream->runtime;
+		rtd = substream->private_data;
+		prtd = runtime->private_data;
+		dma_desc = snd_soc_dai_get_dma_data(asoc_rtd_to_cpu(rtd, 0), substream);
+
+		offlevel = (int_status & I2S_TX_DESC_OFF_LEVEL_MASK) >>
+			   I2S_TX_DESC_OFF_LEVEL_SHIFT;
+		while (offlevel) {
+			regmap_read(regmap_i2s, I2S_TX_DESC_OFF_ADDR, &val_1);
+			regmap_read(regmap_i2s, I2S_TX_DESC_OFF_LEN,  &val_2);
+			prtd->dma_addr_next = val_1 + val_2;
+			offlevel--;
+		}
+
+		ifflevel = (int_status & I2S_TX_DESC_IFF_LEVEL_MASK) >>
+			I2S_TX_DESC_IFF_LEVEL_SHIFT;
+		availdepth = I2S_DESC_FIFO_DEPTH - ifflevel;
+
+		while (availdepth) {
+			dma_desc->dma_addr +=
+					snd_pcm_lib_period_bytes(substream);
+			dma_desc->dma_area +=
+					snd_pcm_lib_period_bytes(substream);
+
+			if (dma_desc->dma_addr - runtime->dma_addr >=
+							runtime->dma_bytes) {
+				dma_desc->dma_addr = runtime->dma_addr;
+				dma_desc->dma_area = runtime->dma_area;
+			}
+
+			prtd->dma_addr = dma_desc->dma_addr;
+			regmap_write(regmap_i2s, I2S_TX_DESC_IFF_LEN,
+				snd_pcm_lib_period_bytes(substream));
+			regmap_write(regmap_i2s, I2S_TX_DESC_IFF_ADDR,
+					dma_desc->dma_addr);
+			availdepth--;
+		}
+
+		snd_pcm_period_elapsed(substream);
+
+		/* Clear interrupt by writing 0 */
+		regmap_update_bits(regmap_i2s, I2S_TX_IRQ_CTL,
+				   I2S_TX_INTR_MASK, 0);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int bcm63xx_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream)
+{
+	struct snd_pcm_substream *substream = pcm->streams[stream].substream;
+	struct snd_dma_buffer *buf = &substream->dma_buffer;
+	size_t size = bcm63xx_pcm_hardware.buffer_bytes_max;
+
+	buf->dev.type = SNDRV_DMA_TYPE_DEV;
+	buf->dev.dev = pcm->card->dev;
+	buf->private_data = NULL;
+
+	buf->area = dma_alloc_wc(pcm->card->dev,
+				 size, &buf->addr,
+				 GFP_KERNEL);
+	if (!buf->area)
+		return -ENOMEM;
+	buf->bytes = size;
+	return 0;
+}
+
+static int bcm63xx_soc_pcm_new(struct snd_soc_component *component,
+		struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_pcm *pcm = rtd->pcm;
+	struct bcm_i2s_priv *i2s_priv;
+	int ret;
+
+	i2s_priv = dev_get_drvdata(asoc_rtd_to_cpu(rtd, 0)->dev);
+
+	of_dma_configure(pcm->card->dev, pcm->card->dev->of_node, 1);
+
+	ret = dma_coerce_mask_and_coherent(pcm->card->dev, DMA_BIT_MASK(32));
+	if (ret)
+		goto out;
+
+	if (pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream) {
+		ret = bcm63xx_pcm_preallocate_dma_buffer(pcm,
+						 SNDRV_PCM_STREAM_PLAYBACK);
+		if (ret)
+			goto out;
+
+		i2s_priv->play_substream =
+			pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream;
+	}
+
+	if (pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream) {
+		ret = bcm63xx_pcm_preallocate_dma_buffer(pcm,
+					SNDRV_PCM_STREAM_CAPTURE);
+		if (ret)
+			goto out;
+		i2s_priv->capture_substream =
+			pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream;
+	}
+
+out:
+	return ret;
+}
+
+static void bcm63xx_pcm_free_dma_buffers(struct snd_soc_component *component,
+			 struct snd_pcm *pcm)
+{
+	int stream;
+	struct snd_dma_buffer *buf;
+	struct snd_pcm_substream *substream;
+
+	for (stream = 0; stream < 2; stream++) {
+		substream = pcm->streams[stream].substream;
+		if (!substream)
+			continue;
+		buf = &substream->dma_buffer;
+		if (!buf->area)
+			continue;
+		dma_free_wc(pcm->card->dev, buf->bytes,
+					buf->area, buf->addr);
+		buf->area = NULL;
+	}
+}
+
+static const struct snd_soc_component_driver bcm63xx_soc_platform = {
+	.open = bcm63xx_pcm_open,
+	.close = bcm63xx_pcm_close,
+	.hw_params = bcm63xx_pcm_hw_params,
+	.hw_free = bcm63xx_pcm_hw_free,
+	.prepare = bcm63xx_pcm_prepare,
+	.trigger = bcm63xx_pcm_trigger,
+	.pointer = bcm63xx_pcm_pointer,
+	.mmap = bcm63xx_pcm_mmap,
+	.pcm_construct = bcm63xx_soc_pcm_new,
+	.pcm_destruct = bcm63xx_pcm_free_dma_buffers,
+};
+
+int bcm63xx_soc_platform_probe(struct platform_device *pdev,
+			       struct bcm_i2s_priv *i2s_priv)
+{
+	int ret;
+
+	i2s_priv->r_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!i2s_priv->r_irq) {
+		dev_err(&pdev->dev, "Unable to get register irq resource.\n");
+		return -ENODEV;
+	}
+
+	ret = devm_request_irq(&pdev->dev, i2s_priv->r_irq->start, i2s_dma_isr,
+			i2s_priv->r_irq->flags, "i2s_dma", (void *)i2s_priv);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"i2s_init: failed to request interrupt.ret=%d\n", ret);
+		return ret;
+	}
+
+	return devm_snd_soc_register_component(&pdev->dev,
+					&bcm63xx_soc_platform, NULL, 0);
+}
+
+int bcm63xx_soc_platform_remove(struct platform_device *pdev)
+{
+	return 0;
+}
+
+MODULE_AUTHOR("Kevin,Li <kevin-ke.li@broadcom.com>");
+MODULE_DESCRIPTION("Broadcom DSL XPON ASOC PCM Interface");
+MODULE_LICENSE("GPL v2");
diff --git a/sound/soc/bcm/cygnus-pcm.c b/sound/soc/bcm/cygnus-pcm.c
index 3a80c61..f96d27c 100644
--- a/sound/soc/bcm/cygnus-pcm.c
+++ b/sound/soc/bcm/cygnus-pcm.c
@@ -209,7 +209,7 @@ static struct cygnus_aio_port *cygnus_dai_get_dma_data(
 {
 	struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
 
-	return snd_soc_dai_get_dma_data(soc_runtime->cpu_dai, substream);
+	return snd_soc_dai_get_dma_data(asoc_rtd_to_cpu(soc_runtime, 0), substream);
 }
 
 static void ringbuf_set_initial(void __iomem *audio_io,
@@ -359,7 +359,7 @@ static void disable_intr(struct snd_pcm_substream *substream)
 
 	aio = cygnus_dai_get_dma_data(substream);
 
-	dev_dbg(rtd->cpu_dai->dev, "%s on port %d\n", __func__, aio->portnum);
+	dev_dbg(asoc_rtd_to_cpu(rtd, 0)->dev, "%s on port %d\n", __func__, aio->portnum);
 
 	/* The port number maps to the bit position to be set */
 	set_mask = BIT(aio->portnum);
@@ -590,7 +590,7 @@ static int cygnus_pcm_open(struct snd_soc_component *component,
 	if (!aio)
 		return -ENODEV;
 
-	dev_dbg(rtd->cpu_dai->dev, "%s port %d\n", __func__, aio->portnum);
+	dev_dbg(asoc_rtd_to_cpu(rtd, 0)->dev, "%s port %d\n", __func__, aio->portnum);
 
 	snd_soc_set_runtime_hwparams(substream, &cygnus_pcm_hw);
 
@@ -623,7 +623,7 @@ static int cygnus_pcm_close(struct snd_soc_component *component,
 
 	aio = cygnus_dai_get_dma_data(substream);
 
-	dev_dbg(rtd->cpu_dai->dev, "%s  port %d\n", __func__, aio->portnum);
+	dev_dbg(asoc_rtd_to_cpu(rtd, 0)->dev, "%s  port %d\n", __func__, aio->portnum);
 
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
 		aio->play_stream = NULL;
@@ -631,7 +631,7 @@ static int cygnus_pcm_close(struct snd_soc_component *component,
 		aio->capture_stream = NULL;
 
 	if (!aio->play_stream && !aio->capture_stream)
-		dev_dbg(rtd->cpu_dai->dev, "freed  port %d\n", aio->portnum);
+		dev_dbg(asoc_rtd_to_cpu(rtd, 0)->dev, "freed  port %d\n", aio->portnum);
 
 	return 0;
 }
@@ -645,7 +645,7 @@ static int cygnus_pcm_hw_params(struct snd_soc_component *component,
 	struct cygnus_aio_port *aio;
 
 	aio = cygnus_dai_get_dma_data(substream);
-	dev_dbg(rtd->cpu_dai->dev, "%s  port %d\n", __func__, aio->portnum);
+	dev_dbg(asoc_rtd_to_cpu(rtd, 0)->dev, "%s  port %d\n", __func__, aio->portnum);
 
 	snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
 	runtime->dma_bytes = params_buffer_bytes(params);
@@ -660,7 +660,7 @@ static int cygnus_pcm_hw_free(struct snd_soc_component *component,
 	struct cygnus_aio_port *aio;
 
 	aio = cygnus_dai_get_dma_data(substream);
-	dev_dbg(rtd->cpu_dai->dev, "%s  port %d\n", __func__, aio->portnum);
+	dev_dbg(asoc_rtd_to_cpu(rtd, 0)->dev, "%s  port %d\n", __func__, aio->portnum);
 
 	snd_pcm_set_runtime_buffer(substream, NULL);
 	return 0;
@@ -678,12 +678,12 @@ static int cygnus_pcm_prepare(struct snd_soc_component *component,
 	struct ringbuf_regs *p_rbuf = NULL;
 
 	aio = cygnus_dai_get_dma_data(substream);
-	dev_dbg(rtd->cpu_dai->dev, "%s port %d\n", __func__, aio->portnum);
+	dev_dbg(asoc_rtd_to_cpu(rtd, 0)->dev, "%s port %d\n", __func__, aio->portnum);
 
 	bufsize = snd_pcm_lib_buffer_bytes(substream);
 	periodsize = snd_pcm_lib_period_bytes(substream);
 
-	dev_dbg(rtd->cpu_dai->dev, "%s (buf_size %lu) (period_size %lu)\n",
+	dev_dbg(asoc_rtd_to_cpu(rtd, 0)->dev, "%s (buf_size %lu) (period_size %lu)\n",
 			__func__, bufsize, periodsize);
 
 	configure_ringbuf_regs(substream);
@@ -745,11 +745,11 @@ static int cygnus_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream)
 	buf->area = dma_alloc_coherent(pcm->card->dev, size,
 			&buf->addr, GFP_KERNEL);
 
-	dev_dbg(rtd->cpu_dai->dev, "%s: size 0x%zx @ %pK\n",
+	dev_dbg(asoc_rtd_to_cpu(rtd, 0)->dev, "%s: size 0x%zx @ %pK\n",
 				__func__, size, buf->area);
 
 	if (!buf->area) {
-		dev_err(rtd->cpu_dai->dev, "%s: dma_alloc failed\n", __func__);
+		dev_err(asoc_rtd_to_cpu(rtd, 0)->dev, "%s: dma_alloc failed\n", __func__);
 		return -ENOMEM;
 	}
 	buf->bytes = size;
diff --git a/sound/soc/cirrus/edb93xx.c b/sound/soc/cirrus/edb93xx.c
index 1096119..ccf65f0 100644
--- a/sound/soc/cirrus/edb93xx.c
+++ b/sound/soc/cirrus/edb93xx.c
@@ -23,8 +23,8 @@ static int edb93xx_hw_params(struct snd_pcm_substream *substream,
 			     struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	int err;
 	unsigned int mclk_rate;
 	unsigned int rate = params_rate(params);
diff --git a/sound/soc/cirrus/snappercl15.c b/sound/soc/cirrus/snappercl15.c
index 70c2f3e..cb133e8 100644
--- a/sound/soc/cirrus/snappercl15.c
+++ b/sound/soc/cirrus/snappercl15.c
@@ -23,8 +23,8 @@ static int snappercl15_hw_params(struct snd_pcm_substream *substream,
 				 struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	int err;
 
 	err = snd_soc_dai_set_sysclk(codec_dai, 0, CODEC_CLOCK, 
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index ea91243..e6a0c5d 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -14,262 +14,264 @@
 config SND_SOC_ALL_CODECS
 	tristate "Build all ASoC CODEC drivers"
 	depends on COMPILE_TEST
-	select SND_SOC_88PM860X if MFD_88PM860X
-	select SND_SOC_L3
-	select SND_SOC_AB8500_CODEC if ABX500_CORE
-	select SND_SOC_AC97_CODEC
-	select SND_SOC_AD1836 if SPI_MASTER
-	select SND_SOC_AD193X_SPI if SPI_MASTER
-	select SND_SOC_AD193X_I2C if I2C
-	select SND_SOC_AD1980 if SND_SOC_AC97_BUS
-	select SND_SOC_AD73311
-	select SND_SOC_ADAU1373 if I2C
-	select SND_SOC_ADAU1761_I2C if I2C
-	select SND_SOC_ADAU1761_SPI if SPI
-	select SND_SOC_ADAU1781_I2C if I2C
-	select SND_SOC_ADAU1781_SPI if SPI
-	select SND_SOC_ADAV801 if SPI_MASTER
-	select SND_SOC_ADAV803 if I2C
-	select SND_SOC_ADAU1977_SPI if SPI_MASTER
-	select SND_SOC_ADAU1977_I2C if I2C
-	select SND_SOC_ADAU1701 if I2C
-	select SND_SOC_ADAU7002
-	select SND_SOC_ADAU7118_I2C if I2C
-	select SND_SOC_ADAU7118_HW
-	select SND_SOC_ADS117X
-	select SND_SOC_AK4104 if SPI_MASTER
-	select SND_SOC_AK4118 if I2C
-	select SND_SOC_AK4458 if I2C
-	select SND_SOC_AK4535 if I2C
-	select SND_SOC_AK4554
-	select SND_SOC_AK4613 if I2C
-	select SND_SOC_AK4641 if I2C
-	select SND_SOC_AK4642 if I2C
-	select SND_SOC_AK4671 if I2C
-	select SND_SOC_AK5386
-	select SND_SOC_AK5558 if I2C
-	select SND_SOC_ALC5623 if I2C
-	select SND_SOC_ALC5632 if I2C
-	select SND_SOC_BT_SCO
-	select SND_SOC_BD28623
-	select SND_SOC_CQ0093VC
-	select SND_SOC_CROS_EC_CODEC if CROS_EC
-	select SND_SOC_CS35L32 if I2C
-	select SND_SOC_CS35L33 if I2C
-	select SND_SOC_CS35L34 if I2C
-	select SND_SOC_CS35L35 if I2C
-	select SND_SOC_CS35L36 if I2C
-	select SND_SOC_CS42L42 if I2C
-	select SND_SOC_CS42L51_I2C if I2C
-	select SND_SOC_CS42L52 if I2C && INPUT
-	select SND_SOC_CS42L56 if I2C && INPUT
-	select SND_SOC_CS42L73 if I2C
-	select SND_SOC_CS4265 if I2C
-	select SND_SOC_CS4270 if I2C
-	select SND_SOC_CS4271_I2C if I2C
-	select SND_SOC_CS4271_SPI if SPI_MASTER
-	select SND_SOC_CS42XX8_I2C if I2C
-	select SND_SOC_CS43130 if I2C
-	select SND_SOC_CS4341 if SND_SOC_I2C_AND_SPI
-	select SND_SOC_CS4349 if I2C
-	select SND_SOC_CS47L15 if MFD_CS47L15
-	select SND_SOC_CS47L24 if MFD_CS47L24
-	select SND_SOC_CS47L35 if MFD_CS47L35
-	select SND_SOC_CS47L85 if MFD_CS47L85
-	select SND_SOC_CS47L90 if MFD_CS47L90
-	select SND_SOC_CS47L92 if MFD_CS47L92
-	select SND_SOC_CS53L30 if I2C
-	select SND_SOC_CX20442 if TTY
-	select SND_SOC_CX2072X if I2C
-	select SND_SOC_DA7210 if SND_SOC_I2C_AND_SPI
-	select SND_SOC_DA7213 if I2C
-	select SND_SOC_DA7218 if I2C
-	select SND_SOC_DA7219 if I2C
-	select SND_SOC_DA732X if I2C
-	select SND_SOC_DA9055 if I2C
-	select SND_SOC_DMIC if GPIOLIB
-	select SND_SOC_ES8316 if I2C
-	select SND_SOC_ES8328_SPI if SPI_MASTER
-	select SND_SOC_ES8328_I2C if I2C
-	select SND_SOC_ES7134
-	select SND_SOC_ES7241
-	select SND_SOC_GTM601
-	select SND_SOC_HDAC_HDMI
-	select SND_SOC_HDAC_HDA
-	select SND_SOC_ICS43432
-	select SND_SOC_INNO_RK3036
-	select SND_SOC_ISABELLE if I2C
-	select SND_SOC_JZ4740_CODEC
-	select SND_SOC_JZ4725B_CODEC
-	select SND_SOC_JZ4770_CODEC
-	select SND_SOC_LM4857 if I2C
-	select SND_SOC_LM49453 if I2C
-	select SND_SOC_LOCHNAGAR_SC if MFD_LOCHNAGAR
-	select SND_SOC_MAX98088 if I2C
-	select SND_SOC_MAX98090 if I2C
-	select SND_SOC_MAX98095 if I2C
-	select SND_SOC_MAX98357A if GPIOLIB
-	select SND_SOC_MAX98371 if I2C
-	select SND_SOC_MAX98504 if I2C
-	select SND_SOC_MAX9867 if I2C
-	select SND_SOC_MAX98925 if I2C
-	select SND_SOC_MAX98926 if I2C
-	select SND_SOC_MAX98927 if I2C
-	select SND_SOC_MAX98373 if I2C
-	select SND_SOC_MAX9850 if I2C
-	select SND_SOC_MAX9860 if I2C
-	select SND_SOC_MAX9759
-	select SND_SOC_MAX9768 if I2C
-	select SND_SOC_MAX9877 if I2C
-	select SND_SOC_MC13783 if MFD_MC13XXX
-	select SND_SOC_ML26124 if I2C
-	select SND_SOC_MT6351 if MTK_PMIC_WRAP
-	select SND_SOC_MT6358 if MTK_PMIC_WRAP
-	select SND_SOC_MT6660 if I2C
-	select SND_SOC_NAU8540 if I2C
-	select SND_SOC_NAU8810 if I2C
-	select SND_SOC_NAU8822 if I2C
-	select SND_SOC_NAU8824 if I2C
-	select SND_SOC_NAU8825 if I2C
-	select SND_SOC_HDMI_CODEC
-	select SND_SOC_PCM1681 if I2C
-	select SND_SOC_PCM1789_I2C if I2C
-	select SND_SOC_PCM179X_I2C if I2C
-	select SND_SOC_PCM179X_SPI if SPI_MASTER
-	select SND_SOC_PCM186X_I2C if I2C
-	select SND_SOC_PCM186X_SPI if SPI_MASTER
-	select SND_SOC_PCM3008
-	select SND_SOC_PCM3060_I2C if I2C
-	select SND_SOC_PCM3060_SPI if SPI_MASTER
-	select SND_SOC_PCM3168A_I2C if I2C
-	select SND_SOC_PCM3168A_SPI if SPI_MASTER
-	select SND_SOC_PCM5102A
-	select SND_SOC_PCM512x_I2C if I2C
-	select SND_SOC_PCM512x_SPI if SPI_MASTER
-	select SND_SOC_RK3328
-	select SND_SOC_RT274 if I2C
-	select SND_SOC_RT286 if I2C
-	select SND_SOC_RT298 if I2C
-	select SND_SOC_RT1011 if I2C
-	select SND_SOC_RT1015 if I2C
-	select SND_SOC_RT1305 if I2C
-	select SND_SOC_RT1308 if I2C
-	select SND_SOC_RT5514 if I2C
-	select SND_SOC_RT5616 if I2C
-	select SND_SOC_RT5631 if I2C
-	select SND_SOC_RT5640 if I2C
-	select SND_SOC_RT5645 if I2C
-	select SND_SOC_RT5651 if I2C
-	select SND_SOC_RT5659 if I2C
-	select SND_SOC_RT5660 if I2C
-	select SND_SOC_RT5663 if I2C
-	select SND_SOC_RT5665 if I2C
-	select SND_SOC_RT5668 if I2C
-	select SND_SOC_RT5670 if I2C
-	select SND_SOC_RT5677 if I2C && SPI_MASTER
-	select SND_SOC_RT5682 if I2C
-	select SND_SOC_RT700_SDW if SOUNDWIRE
-	select SND_SOC_RT711_SDW if SOUNDWIRE
-	select SND_SOC_RT715_SDW if SOUNDWIRE
-	select SND_SOC_RT1308_SDW if SOUNDWIRE
-	select SND_SOC_SGTL5000 if I2C
-	select SND_SOC_SI476X if MFD_SI476X_CORE
-	select SND_SOC_SIMPLE_AMPLIFIER
-	select SND_SOC_SIRF_AUDIO_CODEC
-	select SND_SOC_SPDIF
-	select SND_SOC_SSM2305
-	select SND_SOC_SSM2518 if I2C
-	select SND_SOC_SSM2602_SPI if SPI_MASTER
-	select SND_SOC_SSM2602_I2C if I2C
-	select SND_SOC_SSM4567 if I2C
-	select SND_SOC_STA32X if I2C
-	select SND_SOC_STA350 if I2C
-	select SND_SOC_STA529 if I2C
-	select SND_SOC_STAC9766 if SND_SOC_AC97_BUS
-	select SND_SOC_STI_SAS
-	select SND_SOC_TAS2552 if I2C
-	select SND_SOC_TAS2562 if I2C
-	select SND_SOC_TAS2770 if I2C
-	select SND_SOC_TAS5086 if I2C
-	select SND_SOC_TAS571X if I2C
-	select SND_SOC_TAS5720 if I2C
-	select SND_SOC_TAS6424 if I2C
-	select SND_SOC_TDA7419 if I2C
-	select SND_SOC_TFA9879 if I2C
-	select SND_SOC_TLV320AIC23_I2C if I2C
-	select SND_SOC_TLV320AIC23_SPI if SPI_MASTER
-	select SND_SOC_TLV320AIC26 if SPI_MASTER
-	select SND_SOC_TLV320AIC31XX if I2C
-	select SND_SOC_TLV320AIC32X4_I2C if I2C && COMMON_CLK
-	select SND_SOC_TLV320AIC32X4_SPI if SPI_MASTER && COMMON_CLK
-	select SND_SOC_TLV320AIC3X if I2C
-	select SND_SOC_TPA6130A2 if I2C
-	select SND_SOC_TLV320DAC33 if I2C
-	select SND_SOC_TSCS42XX if I2C
-	select SND_SOC_TSCS454 if I2C
-	select SND_SOC_TS3A227E if I2C
-	select SND_SOC_TWL4030 if TWL4030_CORE
-	select SND_SOC_TWL6040 if TWL6040_CORE
-	select SND_SOC_UDA1334 if GPIOLIB
-	select SND_SOC_UDA134X
-	select SND_SOC_UDA1380 if I2C
-	select SND_SOC_WCD9335 if SLIMBUS
-	select SND_SOC_WCD934X if MFD_WCD934X && COMMON_CLK
-	select SND_SOC_WL1273 if MFD_WL1273_CORE
-	select SND_SOC_WM0010 if SPI_MASTER
-	select SND_SOC_WM1250_EV1 if I2C
-	select SND_SOC_WM2000 if I2C
-	select SND_SOC_WM2200 if I2C
-	select SND_SOC_WM5100 if I2C
-	select SND_SOC_WM5102 if MFD_WM5102
-	select SND_SOC_WM5110 if MFD_WM5110
-	select SND_SOC_WM8350 if MFD_WM8350
-	select SND_SOC_WM8400 if MFD_WM8400
-	select SND_SOC_WM8510 if SND_SOC_I2C_AND_SPI
-	select SND_SOC_WM8523 if I2C
-	select SND_SOC_WM8524 if GPIOLIB
-	select SND_SOC_WM8580 if I2C
-	select SND_SOC_WM8711 if SND_SOC_I2C_AND_SPI
-	select SND_SOC_WM8727
-	select SND_SOC_WM8728 if SND_SOC_I2C_AND_SPI
-	select SND_SOC_WM8731 if SND_SOC_I2C_AND_SPI
-	select SND_SOC_WM8737 if SND_SOC_I2C_AND_SPI
-	select SND_SOC_WM8741 if SND_SOC_I2C_AND_SPI
-	select SND_SOC_WM8750 if SND_SOC_I2C_AND_SPI
-	select SND_SOC_WM8753 if SND_SOC_I2C_AND_SPI
-	select SND_SOC_WM8770 if SPI_MASTER
-	select SND_SOC_WM8776 if SND_SOC_I2C_AND_SPI
-	select SND_SOC_WM8782
-	select SND_SOC_WM8804_I2C if I2C
-	select SND_SOC_WM8804_SPI if SPI_MASTER
-	select SND_SOC_WM8900 if I2C
-	select SND_SOC_WM8903 if I2C
-	select SND_SOC_WM8904 if I2C
-	select SND_SOC_WM8940 if I2C
-	select SND_SOC_WM8955 if I2C
-	select SND_SOC_WM8960 if I2C
-	select SND_SOC_WM8961 if I2C
-	select SND_SOC_WM8962 if I2C && INPUT
-	select SND_SOC_WM8971 if I2C
-	select SND_SOC_WM8974 if I2C
-	select SND_SOC_WM8978 if I2C
-	select SND_SOC_WM8983 if SND_SOC_I2C_AND_SPI
-	select SND_SOC_WM8985 if SND_SOC_I2C_AND_SPI
-	select SND_SOC_WM8988 if SND_SOC_I2C_AND_SPI
-	select SND_SOC_WM8990 if I2C
-	select SND_SOC_WM8991 if I2C
-	select SND_SOC_WM8993 if I2C
-	select SND_SOC_WM8994 if MFD_WM8994
-	select SND_SOC_WM8995 if SND_SOC_I2C_AND_SPI
-	select SND_SOC_WM8996 if I2C
-	select SND_SOC_WM8997 if MFD_WM8997
-	select SND_SOC_WM8998 if MFD_WM8998
-	select SND_SOC_WM9081 if I2C
-	select SND_SOC_WM9090 if I2C
-	select SND_SOC_WM9705 if (SND_SOC_AC97_BUS || SND_SOC_AC97_BUS_NEW)
-	select SND_SOC_WM9712 if (SND_SOC_AC97_BUS || SND_SOC_AC97_BUS_NEW)
-	select SND_SOC_WM9713 if (SND_SOC_AC97_BUS || SND_SOC_AC97_BUS_NEW)
-	select SND_SOC_WSA881X if SOUNDWIRE
+	imply SND_SOC_88PM860X
+	imply SND_SOC_L3
+	imply SND_SOC_AB8500_CODEC
+	imply SND_SOC_AC97_CODEC
+	imply SND_SOC_AD1836
+	imply SND_SOC_AD193X_SPI
+	imply SND_SOC_AD193X_I2C
+	imply SND_SOC_AD1980
+	imply SND_SOC_AD73311
+	imply SND_SOC_ADAU1373
+	imply SND_SOC_ADAU1761_I2C
+	imply SND_SOC_ADAU1761_SPI
+	imply SND_SOC_ADAU1781_I2C
+	imply SND_SOC_ADAU1781_SPI
+	imply SND_SOC_ADAV801
+	imply SND_SOC_ADAV803
+	imply SND_SOC_ADAU1977_SPI
+	imply SND_SOC_ADAU1977_I2C
+	imply SND_SOC_ADAU1701
+	imply SND_SOC_ADAU7002
+	imply SND_SOC_ADAU7118_I2C
+	imply SND_SOC_ADAU7118_HW
+	imply SND_SOC_ADS117X
+	imply SND_SOC_AK4104
+	imply SND_SOC_AK4118
+	imply SND_SOC_AK4458
+	imply SND_SOC_AK4535
+	imply SND_SOC_AK4554
+	imply SND_SOC_AK4613
+	imply SND_SOC_AK4641
+	imply SND_SOC_AK4642
+	imply SND_SOC_AK4671
+	imply SND_SOC_AK5386
+	imply SND_SOC_AK5558
+	imply SND_SOC_ALC5623
+	imply SND_SOC_ALC5632
+	imply SND_SOC_BT_SCO
+	imply SND_SOC_BD28623
+	imply SND_SOC_CQ0093VC
+	imply SND_SOC_CROS_EC_CODEC
+	imply SND_SOC_CS35L32
+	imply SND_SOC_CS35L33
+	imply SND_SOC_CS35L34
+	imply SND_SOC_CS35L35
+	imply SND_SOC_CS35L36
+	imply SND_SOC_CS42L42
+	imply SND_SOC_CS42L51_I2C
+	imply SND_SOC_CS42L52
+	imply SND_SOC_CS42L56
+	imply SND_SOC_CS42L73
+	imply SND_SOC_CS4265
+	imply SND_SOC_CS4270
+	imply SND_SOC_CS4271_I2C
+	imply SND_SOC_CS4271_SPI
+	imply SND_SOC_CS42XX8_I2C
+	imply SND_SOC_CS43130
+	imply SND_SOC_CS4341
+	imply SND_SOC_CS4349
+	imply SND_SOC_CS47L15
+	imply SND_SOC_CS47L24
+	imply SND_SOC_CS47L35
+	imply SND_SOC_CS47L85
+	imply SND_SOC_CS47L90
+	imply SND_SOC_CS47L92
+	imply SND_SOC_CS53L30
+	imply SND_SOC_CX20442
+	imply SND_SOC_CX2072X
+	imply SND_SOC_DA7210
+	imply SND_SOC_DA7213
+	imply SND_SOC_DA7218
+	imply SND_SOC_DA7219
+	imply SND_SOC_DA732X
+	imply SND_SOC_DA9055
+	imply SND_SOC_DMIC
+	imply SND_SOC_ES8316
+	imply SND_SOC_ES8328_SPI
+	imply SND_SOC_ES8328_I2C
+	imply SND_SOC_ES7134
+	imply SND_SOC_ES7241
+	imply SND_SOC_GTM601
+	imply SND_SOC_HDAC_HDMI
+	imply SND_SOC_HDAC_HDA
+	imply SND_SOC_ICS43432
+	imply SND_SOC_INNO_RK3036
+	imply SND_SOC_ISABELLE
+	imply SND_SOC_JZ4740_CODEC
+	imply SND_SOC_JZ4725B_CODEC
+	imply SND_SOC_JZ4770_CODEC
+	imply SND_SOC_LM4857
+	imply SND_SOC_LM49453
+	imply SND_SOC_LOCHNAGAR_SC
+	imply SND_SOC_MAX98088
+	imply SND_SOC_MAX98090
+	imply SND_SOC_MAX98095
+	imply SND_SOC_MAX98357A
+	imply SND_SOC_MAX98371
+	imply SND_SOC_MAX98504
+	imply SND_SOC_MAX9867
+	imply SND_SOC_MAX98925
+	imply SND_SOC_MAX98926
+	imply SND_SOC_MAX98927
+	imply SND_SOC_MAX98373
+	imply SND_SOC_MAX9850
+	imply SND_SOC_MAX9860
+	imply SND_SOC_MAX9759
+	imply SND_SOC_MAX9768
+	imply SND_SOC_MAX9877
+	imply SND_SOC_MC13783
+	imply SND_SOC_ML26124
+	imply SND_SOC_MT6351
+	imply SND_SOC_MT6358
+	imply SND_SOC_MT6660
+	imply SND_SOC_NAU8540
+	imply SND_SOC_NAU8810
+	imply SND_SOC_NAU8822
+	imply SND_SOC_NAU8824
+	imply SND_SOC_NAU8825
+	imply SND_SOC_HDMI_CODEC
+	imply SND_SOC_PCM1681
+	imply SND_SOC_PCM1789_I2C
+	imply SND_SOC_PCM179X_I2C
+	imply SND_SOC_PCM179X_SPI
+	imply SND_SOC_PCM186X_I2C
+	imply SND_SOC_PCM186X_SPI
+	imply SND_SOC_PCM3008
+	imply SND_SOC_PCM3060_I2C
+	imply SND_SOC_PCM3060_SPI
+	imply SND_SOC_PCM3168A_I2C
+	imply SND_SOC_PCM3168A_SPI
+	imply SND_SOC_PCM5102A
+	imply SND_SOC_PCM512x_I2C
+	imply SND_SOC_PCM512x_SPI
+	imply SND_SOC_RK3328
+	imply SND_SOC_RT274
+	imply SND_SOC_RT286
+	imply SND_SOC_RT298
+	imply SND_SOC_RT1011
+	imply SND_SOC_RT1015
+	imply SND_SOC_RT1305
+	imply SND_SOC_RT1308
+	imply SND_SOC_RT5514
+	imply SND_SOC_RT5616
+	imply SND_SOC_RT5631
+	imply SND_SOC_RT5640
+	imply SND_SOC_RT5645
+	imply SND_SOC_RT5651
+	imply SND_SOC_RT5659
+	imply SND_SOC_RT5660
+	imply SND_SOC_RT5663
+	imply SND_SOC_RT5665
+	imply SND_SOC_RT5668
+	imply SND_SOC_RT5670
+	imply SND_SOC_RT5677
+	imply SND_SOC_RT5682
+	imply SND_SOC_RT5682_SDW
+	imply SND_SOC_RT700_SDW
+	imply SND_SOC_RT711_SDW
+	imply SND_SOC_RT715_SDW
+	imply SND_SOC_RT1308_SDW
+	imply SND_SOC_SGTL5000
+	imply SND_SOC_SI476X
+	imply SND_SOC_SIMPLE_AMPLIFIER
+	imply SND_SOC_SIRF_AUDIO_CODEC
+	imply SND_SOC_SPDIF
+	imply SND_SOC_SSM2305
+	imply SND_SOC_SSM2518
+	imply SND_SOC_SSM2602_SPI
+	imply SND_SOC_SSM2602_I2C
+	imply SND_SOC_SSM4567
+	imply SND_SOC_STA32X
+	imply SND_SOC_STA350
+	imply SND_SOC_STA529
+	imply SND_SOC_STAC9766
+	imply SND_SOC_STI_SAS
+	imply SND_SOC_TAS2552
+	imply SND_SOC_TAS2562
+	imply SND_SOC_TAS2770
+	imply SND_SOC_TAS5086
+	imply SND_SOC_TAS571X
+	imply SND_SOC_TAS5720
+	imply SND_SOC_TAS6424
+	imply SND_SOC_TDA7419
+	imply SND_SOC_TFA9879
+	imply SND_SOC_TLV320ADCX140
+	imply SND_SOC_TLV320AIC23_I2C
+	imply SND_SOC_TLV320AIC23_SPI
+	imply SND_SOC_TLV320AIC26
+	imply SND_SOC_TLV320AIC31XX
+	imply SND_SOC_TLV320AIC32X4_I2C
+	imply SND_SOC_TLV320AIC32X4_SPI
+	imply SND_SOC_TLV320AIC3X
+	imply SND_SOC_TPA6130A2
+	imply SND_SOC_TLV320DAC33
+	imply SND_SOC_TSCS42XX
+	imply SND_SOC_TSCS454
+	imply SND_SOC_TS3A227E
+	imply SND_SOC_TWL4030
+	imply SND_SOC_TWL6040
+	imply SND_SOC_UDA1334
+	imply SND_SOC_UDA134X
+	imply SND_SOC_UDA1380
+	imply SND_SOC_WCD9335
+	imply SND_SOC_WCD934X
+	imply SND_SOC_WL1273
+	imply SND_SOC_WM0010
+	imply SND_SOC_WM1250_EV1
+	imply SND_SOC_WM2000
+	imply SND_SOC_WM2200
+	imply SND_SOC_WM5100
+	imply SND_SOC_WM5102
+	imply SND_SOC_WM5110
+	imply SND_SOC_WM8350
+	imply SND_SOC_WM8400
+	imply SND_SOC_WM8510
+	imply SND_SOC_WM8523
+	imply SND_SOC_WM8524
+	imply SND_SOC_WM8580
+	imply SND_SOC_WM8711
+	imply SND_SOC_WM8727
+	imply SND_SOC_WM8728
+	imply SND_SOC_WM8731
+	imply SND_SOC_WM8737
+	imply SND_SOC_WM8741
+	imply SND_SOC_WM8750
+	imply SND_SOC_WM8753
+	imply SND_SOC_WM8770
+	imply SND_SOC_WM8776
+	imply SND_SOC_WM8782
+	imply SND_SOC_WM8804_I2C
+	imply SND_SOC_WM8804_SPI
+	imply SND_SOC_WM8900
+	imply SND_SOC_WM8903
+	imply SND_SOC_WM8904
+	imply SND_SOC_WM8940
+	imply SND_SOC_WM8955
+	imply SND_SOC_WM8960
+	imply SND_SOC_WM8961
+	imply SND_SOC_WM8962
+	imply SND_SOC_WM8971
+	imply SND_SOC_WM8974
+	imply SND_SOC_WM8978
+	imply SND_SOC_WM8983
+	imply SND_SOC_WM8985
+	imply SND_SOC_WM8988
+	imply SND_SOC_WM8990
+	imply SND_SOC_WM8991
+	imply SND_SOC_WM8993
+	imply SND_SOC_WM8994
+	imply SND_SOC_WM8995
+	imply SND_SOC_WM8996
+	imply SND_SOC_WM8997
+	imply SND_SOC_WM8998
+	imply SND_SOC_WM9081
+	imply SND_SOC_WM9090
+	imply SND_SOC_WM9705
+	imply SND_SOC_WM9712
+	imply SND_SOC_WM9713
+	imply SND_SOC_WSA881X
 	help
 	  Normally ASoC codec drivers are only built if a machine driver which
 	  uses them is also built since they are only usable with a machine
@@ -283,6 +285,7 @@
 
 config SND_SOC_88PM860X
 	tristate
+	depends on MFD_88PM860X
 
 config SND_SOC_ARIZONA
 	tristate
@@ -318,6 +321,7 @@
 
 config SND_SOC_AB8500_CODEC
 	tristate
+	depends on ABX500_CORE
 
 config SND_SOC_AC97_CODEC
 	tristate "Build generic ASoC AC97 CODEC driver"
@@ -326,21 +330,25 @@
 
 config SND_SOC_AD1836
 	tristate
+	depends on SPI_MASTER
 
 config SND_SOC_AD193X
 	tristate
 
 config SND_SOC_AD193X_SPI
 	tristate
+	depends on SPI_MASTER
 	select SND_SOC_AD193X
 
 config SND_SOC_AD193X_I2C
 	tristate
+	depends on I2C
 	select SND_SOC_AD193X
 
 config SND_SOC_AD1980
-	select REGMAP_AC97
 	tristate
+	depends on SND_SOC_AC97_BUS
+	select REGMAP_AC97
 
 config SND_SOC_AD73311
 	tristate
@@ -350,6 +358,7 @@
 
 config SND_SOC_ADAU1373
 	tristate
+	depends on I2C
 	select SND_SOC_ADAU_UTILS
 
 config SND_SOC_ADAU1701
@@ -384,11 +393,13 @@
 
 config SND_SOC_ADAU1781_I2C
 	tristate
+	depends on I2C
 	select SND_SOC_ADAU1781
 	select REGMAP_I2C
 
 config SND_SOC_ADAU1781_SPI
 	tristate
+	depends on SPI_MASTER
 	select SND_SOC_ADAU1781
 	select REGMAP_SPI
 
@@ -397,11 +408,13 @@
 
 config SND_SOC_ADAU1977_SPI
 	tristate
+	depends on SPI_MASTER
 	select SND_SOC_ADAU1977
 	select REGMAP_SPI
 
 config SND_SOC_ADAU1977_I2C
 	tristate
+	depends on I2C
 	select SND_SOC_ADAU1977
 	select REGMAP_I2C
 
@@ -440,10 +453,12 @@
 
 config SND_SOC_ADAV801
 	tristate
+	depends on SPI_MASTER
 	select SND_SOC_ADAV80X
 
 config SND_SOC_ADAV803
 	tristate
+	depends on I2C
 	select SND_SOC_ADAV80X
 
 config SND_SOC_ADS117X
@@ -465,6 +480,7 @@
 
 config SND_SOC_AK4535
 	tristate
+	depends on I2C
 
 config SND_SOC_AK4554
 	tristate "AKM AK4554 CODEC"
@@ -475,6 +491,7 @@
 
 config SND_SOC_AK4641
 	tristate
+	depends on I2C
 
 config SND_SOC_AK4642
 	tristate "AKM AK4642 CODEC"
@@ -482,6 +499,7 @@
 
 config SND_SOC_AK4671
 	tristate
+	depends on I2C
 
 config SND_SOC_AK5386
 	tristate "AKM AK5638 CODEC"
@@ -497,6 +515,7 @@
 
 config SND_SOC_ALC5632
 	tristate
+	depends on I2C
 
 config SND_SOC_BD28623
 	tristate "ROHM BD28623 CODEC"
@@ -631,6 +650,7 @@
 
 config SND_SOC_CS47L24
 	tristate
+	depends on MFD_CS47L24
 
 config SND_SOC_CS47L35
 	tristate
@@ -697,6 +717,7 @@
 
 config SND_SOC_DA7210
 	tristate
+	depends on I2C
 
 config SND_SOC_DA7213
 	tristate "Dialog DA7213 CODEC"
@@ -704,15 +725,19 @@
 
 config SND_SOC_DA7218
 	tristate
+	depends on I2C
 
 config SND_SOC_DA7219
 	tristate
+	depends on I2C
 
 config SND_SOC_DA732X
 	tristate
+	depends on I2C
 
 config SND_SOC_DA9055
 	tristate
+	depends on I2C
 
 config SND_SOC_DMIC
 	tristate "Generic Digital Microphone CODEC"
@@ -772,9 +797,11 @@
 
 config SND_SOC_ISABELLE
 	tristate
+	depends on I2C
 
 config SND_SOC_LM49453
 	tristate
+	depends on I2C
 
 config SND_SOC_LOCHNAGAR_SC
 	tristate "Lochnagar Sound Card"
@@ -801,17 +828,20 @@
 	depends on I2C
 
 config SND_SOC_MAX98090
-       tristate
+	tristate
+	depends on I2C
 
 config SND_SOC_MAX98095
-       tristate
+	tristate
+	depends on I2C
 
 config SND_SOC_MAX98357A
 	tristate "Maxim MAX98357A CODEC"
 	depends on GPIOLIB
 
 config SND_SOC_MAX98371
-       tristate
+	tristate
+	depends on I2C
 
 config SND_SOC_MAX98504
 	tristate "Maxim MAX98504 speaker amplifier"
@@ -822,10 +852,12 @@
 	depends on I2C
 
 config SND_SOC_MAX98925
-       tristate
+	tristate
+	depends on I2C
 
 config SND_SOC_MAX98926
 	tristate
+	depends on I2C
 
 config SND_SOC_MAX98927
 	tristate "Maxim Integrated MAX98927 Speaker Amplifier"
@@ -837,6 +869,7 @@
 
 config SND_SOC_MAX9850
 	tristate
+	depends on I2C
 
 config SND_SOC_MAX9860
 	tristate "Maxim MAX9860 Mono Audio Voice Codec"
@@ -1015,26 +1048,32 @@
 
 config SND_SOC_RT1011
 	tristate
+	depends on I2C
 
 config SND_SOC_RT1015
 	tristate
+	depends on I2C
 
 config SND_SOC_RT1305
 	tristate
+	depends on I2C
 
 config SND_SOC_RT1308
 	tristate
+	depends on I2C
 
 config SND_SOC_RT1308_SDW
 	tristate "Realtek RT1308 Codec - SDW"
-	depends on SOUNDWIRE
+	depends on I2C && SOUNDWIRE
 	select REGMAP_SOUNDWIRE
 
 config SND_SOC_RT5514
 	tristate
+	depends on I2C
 
 config SND_SOC_RT5514_SPI
 	tristate
+	depends on SPI_MASTER
 
 config SND_SOC_RT5514_SPI_BUILTIN
 	bool # force RT5514_SPI to be built-in to avoid link errors
@@ -1050,33 +1089,43 @@
 
 config SND_SOC_RT5640
 	tristate
+	depends on I2C
 
 config SND_SOC_RT5645
 	tristate
+	depends on I2C
 
 config SND_SOC_RT5651
 	tristate
+	depends on I2C
 
 config SND_SOC_RT5659
 	tristate
+	depends on I2C
 
 config SND_SOC_RT5660
 	tristate
+	depends on I2C
 
 config SND_SOC_RT5663
 	tristate
+	depends on I2C
 
 config SND_SOC_RT5665
 	tristate
+	depends on I2C
 
 config SND_SOC_RT5668
 	tristate
+	depends on I2C
 
 config SND_SOC_RT5670
 	tristate
+	depends on I2C
 
 config SND_SOC_RT5677
 	tristate
+	depends on I2C
 	select REGMAP_I2C
 	select REGMAP_IRQ
 
@@ -1086,6 +1135,13 @@
 
 config SND_SOC_RT5682
 	tristate
+	depends on I2C || SOUNDWIRE
+
+config SND_SOC_RT5682_SDW
+	tristate "Realtek RT5682 Codec - SDW"
+	depends on SOUNDWIRE
+	select SND_SOC_RT5682
+	select REGMAP_SOUNDWIRE
 
 config SND_SOC_RT700
 	tristate
@@ -1153,6 +1209,7 @@
 
 config SND_SOC_SSM2518
 	tristate
+	depends on I2C
 
 config SND_SOC_SSM2602
 	tristate
@@ -1184,9 +1241,11 @@
 
 config SND_SOC_STA529
 	tristate
+	depends on I2C
 
 config SND_SOC_STAC9766
 	tristate
+	depends on SND_SOC_AC97_BUS
 
 config SND_SOC_STI_SAS
 	tristate "codec Audio support for STI SAS codec"
@@ -1281,6 +1340,15 @@
 
 config SND_SOC_TLV320DAC33
 	tristate
+	depends on I2C
+
+config SND_SOC_TLV320ADCX140
+	tristate "Texas Instruments TLV320ADCX140 CODEC family"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Add support for Texas Instruments tlv320adc3140, tlv320adc5140 and
+	  tlv320adc6140 quad channel ADCs.
 
 config SND_SOC_TS3A227E
 	tristate "TI Headset/Mic detect and keypress chip"
@@ -1301,11 +1369,13 @@
 	  Add support for Tempo Semiconductor's TSCS454 audio CODEC.
 
 config SND_SOC_TWL4030
-	select MFD_TWL4030_AUDIO
 	tristate
+	depends on TWL4030_CORE
+	select MFD_TWL4030_AUDIO
 
 config SND_SOC_TWL6040
 	tristate
+	depends on TWL6040_CORE
 
 config SND_SOC_UDA1334
 	tristate "NXP UDA1334 DAC"
@@ -1345,30 +1415,40 @@
 
 config SND_SOC_WM0010
 	tristate
+	depends on SPI_MASTER
 
 config SND_SOC_WM1250_EV1
 	tristate
+	depends on I2C
 
 config SND_SOC_WM2000
 	tristate
+	depends on I2C
 
 config SND_SOC_WM2200
 	tristate
+	depends on I2C
 
 config SND_SOC_WM5100
 	tristate
+	depends on I2C
 
 config SND_SOC_WM5102
 	tristate
+	depends on MFD_WM5102
 
 config SND_SOC_WM5110
 	tristate
+	depends on MFD_WM5110
 
 config SND_SOC_WM8350
 	tristate
+	depends on MFD_WM8350
 
 config SND_SOC_WM8400
 	tristate
+	# FIXME nothing selects SND_SOC_WM8400??
+	depends on MFD_WM8400
 
 config SND_SOC_WM8510
 	tristate "Wolfson Microelectronics WM8510 CODEC"
@@ -1456,9 +1536,11 @@
 
 config SND_SOC_WM8940
 	tristate
+	depends on I2C
 
 config SND_SOC_WM8955
 	tristate
+	depends on I2C
 
 config SND_SOC_WM8960
 	tristate "Wolfson Microelectronics WM8960 CODEC"
@@ -1466,6 +1548,7 @@
 
 config SND_SOC_WM8961
 	tristate
+	depends on I2C
 
 config SND_SOC_WM8962
 	tristate "Wolfson Microelectronics WM8962 CODEC"
@@ -1473,6 +1556,7 @@
 
 config SND_SOC_WM8971
 	tristate
+	depends on I2C
 
 config SND_SOC_WM8974
 	tristate "Wolfson Microelectronics WM8974 codec"
@@ -1484,6 +1568,7 @@
 
 config SND_SOC_WM8983
 	tristate
+	depends on I2C
 
 config SND_SOC_WM8985
 	tristate "Wolfson Microelectronics WM8985 and WM8758 codec driver"
@@ -1494,12 +1579,15 @@
 
 config SND_SOC_WM8990
 	tristate
+	depends on I2C
 
 config SND_SOC_WM8991
 	tristate
+	depends on I2C
 
 config SND_SOC_WM8993
 	tristate
+	depends on I2C
 
 config SND_SOC_WM8994
 	tristate
@@ -1509,12 +1597,15 @@
 
 config SND_SOC_WM8996
 	tristate
+	depends on I2C
 
 config SND_SOC_WM8997
 	tristate
+	depends on MFD_WM8997
 
 config SND_SOC_WM8998
 	tristate
+	depends on MFD_WM8998
 
 config SND_SOC_WM9081
 	tristate
@@ -1522,19 +1613,23 @@
 
 config SND_SOC_WM9090
 	tristate
+	depends on I2C
 
 config SND_SOC_WM9705
 	tristate
+	depends on SND_SOC_AC97_BUS
 	select REGMAP_AC97
 	select AC97_BUS_COMPAT if AC97_BUS_NEW
 
 config SND_SOC_WM9712
 	tristate
+	depends on SND_SOC_AC97_BUS
 	select REGMAP_AC97
 	select AC97_BUS_COMPAT if AC97_BUS_NEW
 
 config SND_SOC_WM9713
 	tristate
+	depends on SND_SOC_AC97_BUS
 	select REGMAP_AC97
 	select AC97_BUS_COMPAT if AC97_BUS_NEW
 
@@ -1555,6 +1650,7 @@
 # Amp
 config SND_SOC_LM4857
 	tristate
+	depends on I2C
 
 config SND_SOC_MAX9759
 	tristate "Maxim MAX9759 speaker Amplifier"
@@ -1562,15 +1658,19 @@
 
 config SND_SOC_MAX9768
 	tristate
+	depends on I2C
 
 config SND_SOC_MAX9877
 	tristate
+	depends on I2C
 
 config SND_SOC_MC13783
 	tristate
+	depends on MFD_MC13XXX
 
 config SND_SOC_ML26124
 	tristate
+	depends on I2C
 
 config SND_SOC_MT6351
 	tristate "MediaTek MT6351 Codec"
@@ -1608,6 +1708,7 @@
 
 config SND_SOC_NAU8825
 	tristate
+	depends on I2C
 
 config SND_SOC_TPA6130A2
 	tristate "Texas Instruments TPA6130A2 headphone amplifier"
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index ba1b4b3..03533157 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -177,6 +177,7 @@
 snd-soc-rt5677-objs := rt5677.o
 snd-soc-rt5677-spi-objs := rt5677-spi.o
 snd-soc-rt5682-objs := rt5682.o
+snd-soc-rt5682-sdw-objs := rt5682-sdw.o
 snd-soc-rt700-objs := rt700.o rt700-sdw.o
 snd-soc-rt711-objs := rt711.o rt711-sdw.o
 snd-soc-rt715-objs := rt715.o rt715-sdw.o
@@ -218,6 +219,7 @@
 snd-soc-tlv320aic32x4-spi-objs := tlv320aic32x4-spi.o
 snd-soc-tlv320aic3x-objs := tlv320aic3x.o
 snd-soc-tlv320dac33-objs := tlv320dac33.o
+snd-soc-tlv320adcx140-objs := tlv320adcx140.o
 snd-soc-tscs42xx-objs := tscs42xx.o
 snd-soc-tscs454-objs := tscs454.o
 snd-soc-ts3a227e-objs := ts3a227e.o
@@ -476,6 +478,7 @@
 obj-$(CONFIG_SND_SOC_RT5677)	+= snd-soc-rt5677.o
 obj-$(CONFIG_SND_SOC_RT5677_SPI)	+= snd-soc-rt5677-spi.o
 obj-$(CONFIG_SND_SOC_RT5682)	+= snd-soc-rt5682.o
+obj-$(CONFIG_SND_SOC_RT5682_SDW)	+= snd-soc-rt5682-sdw.o
 obj-$(CONFIG_SND_SOC_RT700)     += snd-soc-rt700.o
 obj-$(CONFIG_SND_SOC_RT711)     += snd-soc-rt711.o
 obj-$(CONFIG_SND_SOC_RT715)     += snd-soc-rt715.o
@@ -516,6 +519,7 @@
 obj-$(CONFIG_SND_SOC_TLV320AIC32X4_SPI)	+= snd-soc-tlv320aic32x4-spi.o
 obj-$(CONFIG_SND_SOC_TLV320AIC3X)	+= snd-soc-tlv320aic3x.o
 obj-$(CONFIG_SND_SOC_TLV320DAC33)	+= snd-soc-tlv320dac33.o
+obj-$(CONFIG_SND_SOC_TLV320ADCX140)	+= snd-soc-tlv320adcx140.o
 obj-$(CONFIG_SND_SOC_TSCS42XX)	+= snd-soc-tscs42xx.o
 obj-$(CONFIG_SND_SOC_TSCS454)	+= snd-soc-tscs454.o
 obj-$(CONFIG_SND_SOC_TS3A227E)	+= snd-soc-ts3a227e.o
diff --git a/sound/soc/codecs/cros_ec_codec.c b/sound/soc/codecs/cros_ec_codec.c
index 6a24f57..d3dc42a 100644
--- a/sound/soc/codecs/cros_ec_codec.c
+++ b/sound/soc/codecs/cros_ec_codec.c
@@ -45,6 +45,9 @@ struct cros_ec_codec_priv {
 	/* DMIC */
 	atomic_t dmic_probed;
 
+	/* I2S_RX */
+	uint32_t i2s_rx_bclk_ratio;
+
 	/* WoV */
 	bool wov_enabled;
 	uint8_t *wov_audio_shm_p;
@@ -259,6 +262,7 @@ static int i2s_rx_hw_params(struct snd_pcm_substream *substream,
 		snd_soc_component_get_drvdata(component);
 	struct ec_param_ec_codec_i2s_rx p;
 	enum ec_codec_i2s_rx_sample_depth depth;
+	uint32_t bclk;
 	int ret;
 
 	if (params_rate(params) != 48000)
@@ -284,15 +288,29 @@ static int i2s_rx_hw_params(struct snd_pcm_substream *substream,
 	if (ret < 0)
 		return ret;
 
-	dev_dbg(component->dev, "set bclk to %u\n",
-		snd_soc_params_to_bclk(params));
+	if (priv->i2s_rx_bclk_ratio)
+		bclk = params_rate(params) * priv->i2s_rx_bclk_ratio;
+	else
+		bclk = snd_soc_params_to_bclk(params);
+
+	dev_dbg(component->dev, "set bclk to %u\n", bclk);
 
 	p.cmd = EC_CODEC_I2S_RX_SET_BCLK;
-	p.set_bclk_param.bclk = snd_soc_params_to_bclk(params);
+	p.set_bclk_param.bclk = bclk;
 	return send_ec_host_command(priv->ec_device, EC_CMD_EC_CODEC_I2S_RX,
 				    (uint8_t *)&p, sizeof(p), NULL, 0);
 }
 
+static int i2s_rx_set_bclk_ratio(struct snd_soc_dai *dai, unsigned int ratio)
+{
+	struct snd_soc_component *component = dai->component;
+	struct cros_ec_codec_priv *priv =
+		snd_soc_component_get_drvdata(component);
+
+	priv->i2s_rx_bclk_ratio = ratio;
+	return 0;
+}
+
 static int i2s_rx_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 {
 	struct snd_soc_component *component = dai->component;
@@ -340,6 +358,7 @@ static int i2s_rx_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 static const struct snd_soc_dai_ops i2s_rx_dai_ops = {
 	.hw_params = i2s_rx_hw_params,
 	.set_fmt = i2s_rx_set_fmt,
+	.set_bclk_ratio = i2s_rx_set_bclk_ratio,
 };
 
 static int i2s_rx_event(struct snd_soc_dapm_widget *w,
diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c
index 5f25b9f..8a02791 100644
--- a/sound/soc/codecs/cs4270.c
+++ b/sound/soc/codecs/cs4270.c
@@ -137,6 +137,9 @@ struct cs4270_private {
 
 	/* power domain regulators */
 	struct regulator_bulk_data supplies[ARRAY_SIZE(supply_names)];
+
+	/* reset gpio */
+	struct gpio_desc *reset_gpio;
 };
 
 static const struct snd_soc_dapm_widget cs4270_dapm_widgets[] = {
@@ -649,6 +652,22 @@ static const struct regmap_config cs4270_regmap = {
 };
 
 /**
+ * cs4270_i2c_remove - deinitialize the I2C interface of the CS4270
+ * @i2c_client: the I2C client object
+ *
+ * This function puts the chip into low power mode when the i2c device
+ * is removed.
+ */
+static int cs4270_i2c_remove(struct i2c_client *i2c_client)
+{
+	struct cs4270_private *cs4270 = i2c_get_clientdata(i2c_client);
+
+	gpiod_set_value_cansleep(cs4270->reset_gpio, 0);
+
+	return 0;
+}
+
+/**
  * cs4270_i2c_probe - initialize the I2C interface of the CS4270
  * @i2c_client: the I2C client object
  * @id: the I2C device ID (ignored)
@@ -660,7 +679,6 @@ static int cs4270_i2c_probe(struct i2c_client *i2c_client,
 	const struct i2c_device_id *id)
 {
 	struct cs4270_private *cs4270;
-	struct gpio_desc *reset_gpiod;
 	unsigned int val;
 	int ret, i;
 
@@ -679,10 +697,21 @@ static int cs4270_i2c_probe(struct i2c_client *i2c_client,
 	if (ret < 0)
 		return ret;
 
-	reset_gpiod = devm_gpiod_get_optional(&i2c_client->dev, "reset",
-					      GPIOD_OUT_HIGH);
-	if (PTR_ERR(reset_gpiod) == -EPROBE_DEFER)
-		return -EPROBE_DEFER;
+	/* reset the device */
+	cs4270->reset_gpio = devm_gpiod_get_optional(&i2c_client->dev, "reset",
+						     GPIOD_OUT_LOW);
+	if (IS_ERR(cs4270->reset_gpio)) {
+		dev_dbg(&i2c_client->dev, "Error getting CS4270 reset GPIO\n");
+		return PTR_ERR(cs4270->reset_gpio);
+	}
+
+	if (cs4270->reset_gpio) {
+		dev_dbg(&i2c_client->dev, "Found reset GPIO\n");
+		gpiod_set_value_cansleep(cs4270->reset_gpio, 1);
+	}
+
+	/* Sleep 500ns before i2c communications */
+	ndelay(500);
 
 	cs4270->regmap = devm_regmap_init_i2c(i2c_client, &cs4270_regmap);
 	if (IS_ERR(cs4270->regmap))
@@ -735,6 +764,7 @@ static struct i2c_driver cs4270_i2c_driver = {
 	},
 	.id_table = cs4270_id,
 	.probe = cs4270_i2c_probe,
+	.remove = cs4270_i2c_remove,
 };
 
 module_i2c_driver(cs4270_i2c_driver);
diff --git a/sound/soc/codecs/cs4271.c b/sound/soc/codecs/cs4271.c
index 04b86a5..62f412d 100644
--- a/sound/soc/codecs/cs4271.c
+++ b/sound/soc/codecs/cs4271.c
@@ -356,9 +356,9 @@ static int cs4271_hw_params(struct snd_pcm_substream *substream,
 		 */
 
 		if ((substream->stream == SNDRV_PCM_STREAM_PLAYBACK &&
-		     !dai->capture_active) ||
+		     !dai->stream_active[SNDRV_PCM_STREAM_CAPTURE]) ||
 		    (substream->stream == SNDRV_PCM_STREAM_CAPTURE &&
-		     !dai->playback_active)) {
+		     !dai->stream_active[SNDRV_PCM_STREAM_PLAYBACK])) {
 			ret = regmap_update_bits(cs4271->regmap, CS4271_MODE2,
 						 CS4271_MODE2_PDN,
 						 CS4271_MODE2_PDN);
diff --git a/sound/soc/codecs/cs47l15.c b/sound/soc/codecs/cs47l15.c
index e8840dc..8d1869bf 100644
--- a/sound/soc/codecs/cs47l15.c
+++ b/sound/soc/codecs/cs47l15.c
@@ -1239,12 +1239,12 @@ static int cs47l15_open(struct snd_compr_stream *stream)
 	struct madera *madera = priv->madera;
 	int n_adsp;
 
-	if (strcmp(rtd->codec_dai->name, "cs47l15-dsp-trace") == 0) {
+	if (strcmp(asoc_rtd_to_codec(rtd, 0)->name, "cs47l15-dsp-trace") == 0) {
 		n_adsp = 0;
 	} else {
 		dev_err(madera->dev,
 			"No suitable compressed stream for DAI '%s'\n",
-			rtd->codec_dai->name);
+			asoc_rtd_to_codec(rtd, 0)->name);
 		return -EINVAL;
 	}
 
diff --git a/sound/soc/codecs/cs47l24.c b/sound/soc/codecs/cs47l24.c
index 25bffc2..6b0570f 100644
--- a/sound/soc/codecs/cs47l24.c
+++ b/sound/soc/codecs/cs47l24.c
@@ -1076,14 +1076,14 @@ static int cs47l24_open(struct snd_compr_stream *stream)
 	struct arizona *arizona = priv->core.arizona;
 	int n_adsp;
 
-	if (strcmp(rtd->codec_dai->name, "cs47l24-dsp-voicectrl") == 0) {
+	if (strcmp(asoc_rtd_to_codec(rtd, 0)->name, "cs47l24-dsp-voicectrl") == 0) {
 		n_adsp = 2;
-	} else if (strcmp(rtd->codec_dai->name, "cs47l24-dsp-trace") == 0) {
+	} else if (strcmp(asoc_rtd_to_codec(rtd, 0)->name, "cs47l24-dsp-trace") == 0) {
 		n_adsp = 1;
 	} else {
 		dev_err(arizona->dev,
 			"No suitable compressed stream for DAI '%s'\n",
-			rtd->codec_dai->name);
+			asoc_rtd_to_codec(rtd, 0)->name);
 		return -EINVAL;
 	}
 
diff --git a/sound/soc/codecs/cs47l35.c b/sound/soc/codecs/cs47l35.c
index 3d48a0d..1883980 100644
--- a/sound/soc/codecs/cs47l35.c
+++ b/sound/soc/codecs/cs47l35.c
@@ -1514,14 +1514,14 @@ static int cs47l35_open(struct snd_compr_stream *stream)
 	struct madera *madera = priv->madera;
 	int n_adsp;
 
-	if (strcmp(rtd->codec_dai->name, "cs47l35-dsp-voicectrl") == 0) {
+	if (strcmp(asoc_rtd_to_codec(rtd, 0)->name, "cs47l35-dsp-voicectrl") == 0) {
 		n_adsp = 2;
-	} else if (strcmp(rtd->codec_dai->name, "cs47l35-dsp-trace") == 0) {
+	} else if (strcmp(asoc_rtd_to_codec(rtd, 0)->name, "cs47l35-dsp-trace") == 0) {
 		n_adsp = 0;
 	} else {
 		dev_err(madera->dev,
 			"No suitable compressed stream for DAI '%s'\n",
-			rtd->codec_dai->name);
+			asoc_rtd_to_codec(rtd, 0)->name);
 		return -EINVAL;
 	}
 
diff --git a/sound/soc/codecs/cs47l85.c b/sound/soc/codecs/cs47l85.c
index bef3471..a575113 100644
--- a/sound/soc/codecs/cs47l85.c
+++ b/sound/soc/codecs/cs47l85.c
@@ -2457,14 +2457,14 @@ static int cs47l85_open(struct snd_compr_stream *stream)
 	struct madera *madera = priv->madera;
 	int n_adsp;
 
-	if (strcmp(rtd->codec_dai->name, "cs47l85-dsp-voicectrl") == 0) {
+	if (strcmp(asoc_rtd_to_codec(rtd, 0)->name, "cs47l85-dsp-voicectrl") == 0) {
 		n_adsp = 5;
-	} else if (strcmp(rtd->codec_dai->name, "cs47l85-dsp-trace") == 0) {
+	} else if (strcmp(asoc_rtd_to_codec(rtd, 0)->name, "cs47l85-dsp-trace") == 0) {
 		n_adsp = 0;
 	} else {
 		dev_err(madera->dev,
 			"No suitable compressed stream for DAI '%s'\n",
-			rtd->codec_dai->name);
+			asoc_rtd_to_codec(rtd, 0)->name);
 		return -EINVAL;
 	}
 
diff --git a/sound/soc/codecs/cs47l90.c b/sound/soc/codecs/cs47l90.c
index 266eade..81a1311 100644
--- a/sound/soc/codecs/cs47l90.c
+++ b/sound/soc/codecs/cs47l90.c
@@ -2368,14 +2368,14 @@ static int cs47l90_open(struct snd_compr_stream *stream)
 	struct madera *madera = priv->madera;
 	int n_adsp;
 
-	if (strcmp(rtd->codec_dai->name, "cs47l90-dsp-voicectrl") == 0) {
+	if (strcmp(asoc_rtd_to_codec(rtd, 0)->name, "cs47l90-dsp-voicectrl") == 0) {
 		n_adsp = 5;
-	} else if (strcmp(rtd->codec_dai->name, "cs47l90-dsp-trace") == 0) {
+	} else if (strcmp(asoc_rtd_to_codec(rtd, 0)->name, "cs47l90-dsp-trace") == 0) {
 		n_adsp = 0;
 	} else {
 		dev_err(madera->dev,
 			"No suitable compressed stream for DAI '%s'\n",
-			rtd->codec_dai->name);
+			asoc_rtd_to_codec(rtd, 0)->name);
 		return -EINVAL;
 	}
 
diff --git a/sound/soc/codecs/cs47l92.c b/sound/soc/codecs/cs47l92.c
index 942040f..15fc213 100644
--- a/sound/soc/codecs/cs47l92.c
+++ b/sound/soc/codecs/cs47l92.c
@@ -1840,12 +1840,12 @@ static int cs47l92_open(struct snd_compr_stream *stream)
 	struct madera *madera = priv->madera;
 	int n_adsp;
 
-	if (strcmp(rtd->codec_dai->name, "cs47l92-dsp-trace") == 0) {
+	if (strcmp(asoc_rtd_to_codec(rtd, 0)->name, "cs47l92-dsp-trace") == 0) {
 		n_adsp = 0;
 	} else {
 		dev_err(madera->dev,
 			"No suitable compressed stream for DAI '%s'\n",
-			rtd->codec_dai->name);
+			asoc_rtd_to_codec(rtd, 0)->name);
 		return -EINVAL;
 	}
 
diff --git a/sound/soc/codecs/hdac_hdmi.c b/sound/soc/codecs/hdac_hdmi.c
index e655847..fba9b749 100644
--- a/sound/soc/codecs/hdac_hdmi.c
+++ b/sound/soc/codecs/hdac_hdmi.c
@@ -1998,11 +1998,11 @@ static struct hdac_hdmi_drv_data intel_drv_data  = {
 
 static int hdac_hdmi_dev_probe(struct hdac_device *hdev)
 {
-	struct hdac_hdmi_priv *hdmi_priv = NULL;
+	struct hdac_hdmi_priv *hdmi_priv;
 	struct snd_soc_dai_driver *hdmi_dais = NULL;
-	struct hdac_ext_link *hlink = NULL;
+	struct hdac_ext_link *hlink;
 	int num_dais = 0;
-	int ret = 0;
+	int ret;
 	struct hdac_driver *hdrv = drv_to_hdac_driver(hdev->dev.driver);
 	const struct hda_device_id *hdac_id = hdac_get_device_id(hdev, hdrv);
 
diff --git a/sound/soc/codecs/max98357a.c b/sound/soc/codecs/max98357a.c
index 16313b9..a8bd793 100644
--- a/sound/soc/codecs/max98357a.c
+++ b/sound/soc/codecs/max98357a.c
@@ -5,6 +5,7 @@
  */
 
 #include <linux/acpi.h>
+#include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/err.h>
 #include <linux/gpio.h>
@@ -24,26 +25,24 @@ struct max98357a_priv {
 	unsigned int sdmode_delay;
 };
 
-static int max98357a_daiops_trigger(struct snd_pcm_substream *substream,
-		int cmd, struct snd_soc_dai *dai)
+static int max98357a_sdmode_event(struct snd_soc_dapm_widget *w,
+		struct snd_kcontrol *kcontrol, int event)
 {
-	struct max98357a_priv *max98357a = snd_soc_dai_get_drvdata(dai);
+	struct snd_soc_component *component =
+		snd_soc_dapm_to_component(w->dapm);
+	struct max98357a_priv *max98357a =
+		snd_soc_component_get_drvdata(component);
 
 	if (!max98357a->sdmode)
 		return 0;
 
-	switch (cmd) {
-	case SNDRV_PCM_TRIGGER_START:
-	case SNDRV_PCM_TRIGGER_RESUME:
-	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-		mdelay(max98357a->sdmode_delay);
+	if (event & SND_SOC_DAPM_POST_PMU) {
+		msleep(max98357a->sdmode_delay);
 		gpiod_set_value(max98357a->sdmode, 1);
-		break;
-	case SNDRV_PCM_TRIGGER_STOP:
-	case SNDRV_PCM_TRIGGER_SUSPEND:
-	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		dev_dbg(component->dev, "set sdmode to 1");
+	} else if (event & SND_SOC_DAPM_PRE_PMD) {
 		gpiod_set_value(max98357a->sdmode, 0);
-		break;
+		dev_dbg(component->dev, "set sdmode to 0");
 	}
 
 	return 0;
@@ -51,10 +50,14 @@ static int max98357a_daiops_trigger(struct snd_pcm_substream *substream,
 
 static const struct snd_soc_dapm_widget max98357a_dapm_widgets[] = {
 	SND_SOC_DAPM_OUTPUT("Speaker"),
+	SND_SOC_DAPM_OUT_DRV_E("SD_MODE", SND_SOC_NOPM, 0, 0, NULL, 0,
+			max98357a_sdmode_event,
+			SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
 };
 
 static const struct snd_soc_dapm_route max98357a_dapm_routes[] = {
-	{"Speaker", NULL, "HiFi Playback"},
+	{"SD_MODE", NULL, "HiFi Playback"},
+	{"Speaker", NULL, "SD_MODE"},
 };
 
 static const struct snd_soc_component_driver max98357a_component_driver = {
@@ -68,10 +71,6 @@ static const struct snd_soc_component_driver max98357a_component_driver = {
 	.non_legacy_dai_naming	= 1,
 };
 
-static const struct snd_soc_dai_ops max98357a_dai_ops = {
-	.trigger	= max98357a_daiops_trigger,
-};
-
 static struct snd_soc_dai_driver max98357a_dai_driver = {
 	.name = "HiFi",
 	.playback = {
@@ -91,7 +90,6 @@ static struct snd_soc_dai_driver max98357a_dai_driver = {
 		.channels_min	= 1,
 		.channels_max	= 2,
 	},
-	.ops    = &max98357a_dai_ops,
 };
 
 static int max98357a_platform_probe(struct platform_device *pdev)
@@ -135,6 +133,7 @@ MODULE_DEVICE_TABLE(of, max98357a_device_id);
 #ifdef CONFIG_ACPI
 static const struct acpi_device_id max98357a_acpi_match[] = {
 	{ "MX98357A", 0 },
+	{ "MX98360A", 0 },
 	{},
 };
 MODULE_DEVICE_TABLE(acpi, max98357a_acpi_match);
diff --git a/sound/soc/codecs/mt6660.c b/sound/soc/codecs/mt6660.c
index a36c416..d179700 100644
--- a/sound/soc/codecs/mt6660.c
+++ b/sound/soc/codecs/mt6660.c
@@ -1,15 +1,13 @@
-// SPDX-License-Identifier: GPL-2.0 //
+// SPDX-License-Identifier: GPL-2.0
 
 // Copyright (c) 2019 MediaTek Inc.
 
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/version.h>
 #include <linux/err.h>
 #include <linux/i2c.h>
 #include <linux/pm_runtime.h>
 #include <linux/delay.h>
-#include <linux/debugfs.h>
 #include <sound/soc.h>
 #include <sound/tlv.h>
 #include <sound/pcm_params.h>
@@ -225,14 +223,87 @@ static int _mt6660_chip_power_on(struct mt6660_chip *chip, int on_off)
 				 0x01, on_off ? 0x00 : 0x01);
 }
 
+struct reg_table {
+	uint32_t addr;
+	uint32_t mask;
+	uint32_t val;
+};
+
+static const struct reg_table mt6660_setting_table[] = {
+	{ 0x20, 0x80, 0x00 },
+	{ 0x30, 0x01, 0x00 },
+	{ 0x50, 0x1c, 0x04 },
+	{ 0xB1, 0x0c, 0x00 },
+	{ 0xD3, 0x03, 0x03 },
+	{ 0xE0, 0x01, 0x00 },
+	{ 0x98, 0x44, 0x04 },
+	{ 0xB9, 0xff, 0x82 },
+	{ 0xB7, 0x7777, 0x7273 },
+	{ 0xB6, 0x07, 0x03 },
+	{ 0x6B, 0xe0, 0x20 },
+	{ 0x07, 0xff, 0x70 },
+	{ 0xBB, 0xff, 0x20 },
+	{ 0x69, 0xff, 0x40 },
+	{ 0xBD, 0xffff, 0x17f8 },
+	{ 0x70, 0xff, 0x15 },
+	{ 0x7C, 0xff, 0x00 },
+	{ 0x46, 0xff, 0x1d },
+	{ 0x1A, 0xffffffff, 0x7fdb7ffe },
+	{ 0x1B, 0xffffffff, 0x7fdb7ffe },
+	{ 0x51, 0xff, 0x58 },
+	{ 0xA2, 0xff, 0xce },
+	{ 0x33, 0xffff, 0x7fff },
+	{ 0x4C, 0xffff, 0x0116 },
+	{ 0x16, 0x1800, 0x0800 },
+	{ 0x68, 0x1f, 0x07 },
+};
+
+static int mt6660_component_setting(struct snd_soc_component *component)
+{
+	struct mt6660_chip *chip = snd_soc_component_get_drvdata(component);
+	int ret = 0;
+	size_t i = 0;
+
+	ret = _mt6660_chip_power_on(chip, 1);
+	if (ret < 0) {
+		dev_err(component->dev, "%s chip power on failed\n", __func__);
+		return ret;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(mt6660_setting_table); i++) {
+		ret = snd_soc_component_update_bits(component,
+				mt6660_setting_table[i].addr,
+				mt6660_setting_table[i].mask,
+				mt6660_setting_table[i].val);
+		if (ret < 0) {
+			dev_err(component->dev, "%s update 0x%02x failed\n",
+				__func__, mt6660_setting_table[i].addr);
+			return ret;
+		}
+	}
+
+	ret = _mt6660_chip_power_on(chip, 0);
+	if (ret < 0) {
+		dev_err(component->dev, "%s chip power off failed\n", __func__);
+		return ret;
+	}
+
+	return 0;
+}
+
 static int mt6660_component_probe(struct snd_soc_component *component)
 {
 	struct mt6660_chip *chip = snd_soc_component_get_drvdata(component);
+	int ret;
 
 	dev_dbg(component->dev, "%s\n", __func__);
 	snd_soc_component_init_regmap(component, chip->regmap);
 
-	return 0;
+	ret = mt6660_component_setting(component);
+	if (ret < 0)
+		dev_err(chip->dev, "mt6660 component setting failed\n");
+
+	return ret;
 }
 
 static void mt6660_component_remove(struct snd_soc_component *component)
@@ -506,4 +577,4 @@ module_i2c_driver(mt6660_i2c_driver);
 MODULE_AUTHOR("Jeff Chang <jeff_chang@richtek.com>");
 MODULE_DESCRIPTION("MT6660 SPKAMP Driver");
 MODULE_LICENSE("GPL");
-MODULE_VERSION("1.0.7_G");
+MODULE_VERSION("1.0.8_G");
diff --git a/sound/soc/codecs/rk3328_codec.c b/sound/soc/codecs/rk3328_codec.c
index 287c962..115706a 100644
--- a/sound/soc/codecs/rk3328_codec.c
+++ b/sound/soc/codecs/rk3328_codec.c
@@ -7,6 +7,7 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/device.h>
+#include <linux/gpio/consumer.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
@@ -31,7 +32,7 @@
 
 struct rk3328_codec_priv {
 	struct regmap *regmap;
-	struct regmap *grf;
+	struct gpio_desc *mute;
 	struct clk *mclk;
 	struct clk *pclk;
 	unsigned int sclk;
@@ -106,16 +107,6 @@ static int rk3328_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 	return 0;
 }
 
-static void rk3328_analog_output(struct rk3328_codec_priv *rk3328, int mute)
-{
-	unsigned int val = BIT(17);
-
-	if (mute)
-		val |= BIT(1);
-
-	regmap_write(rk3328->grf, RK3328_GRF_SOC_CON10, val);
-}
-
 static int rk3328_digital_mute(struct snd_soc_dai *dai, int mute)
 {
 	struct rk3328_codec_priv *rk3328 =
@@ -205,7 +196,7 @@ static int rk3328_codec_open_playback(struct rk3328_codec_priv *rk3328)
 	}
 
 	msleep(rk3328->spk_depop_time);
-	rk3328_analog_output(rk3328, 1);
+	gpiod_set_value(rk3328->mute, 0);
 
 	regmap_update_bits(rk3328->regmap, HPOUTL_GAIN_CTRL,
 			   HPOUTL_GAIN_MASK, OUT_VOLUME);
@@ -246,7 +237,7 @@ static int rk3328_codec_close_playback(struct rk3328_codec_priv *rk3328)
 {
 	size_t i;
 
-	rk3328_analog_output(rk3328, 0);
+	gpiod_set_value(rk3328->mute, 1);
 
 	regmap_update_bits(rk3328->regmap, HPOUTL_GAIN_CTRL,
 			   HPOUTL_GAIN_MASK, 0);
@@ -446,7 +437,6 @@ static int rk3328_platform_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "missing 'rockchip,grf'\n");
 		return PTR_ERR(grf);
 	}
-	rk3328->grf = grf;
 	/* enable i2s_acodec_en */
 	regmap_write(grf, RK3328_GRF_SOC_CON2,
 		     (BIT(14) << 16 | BIT(14)));
@@ -458,7 +448,18 @@ static int rk3328_platform_probe(struct platform_device *pdev)
 		rk3328->spk_depop_time = 200;
 	}
 
-	rk3328_analog_output(rk3328, 0);
+	rk3328->mute = gpiod_get_optional(&pdev->dev, "mute", GPIOD_OUT_HIGH);
+	if (IS_ERR(rk3328->mute))
+		return PTR_ERR(rk3328->mute);
+	/*
+	 * Rock64 is the only supported platform to have widely relied on
+	 * this; if we do happen to come across an old DTB, just leave the
+	 * external mute forced off.
+	 */
+	if (!rk3328->mute && of_machine_is_compatible("pine64,rock64")) {
+		dev_warn(&pdev->dev, "assuming implicit control of GPIO_MUTE; update devicetree if possible\n");
+		regmap_write(grf, RK3328_GRF_SOC_CON10, BIT(17) | BIT(1));
+	}
 
 	rk3328->mclk = devm_clk_get(&pdev->dev, "mclk");
 	if (IS_ERR(rk3328->mclk))
diff --git a/sound/soc/codecs/rl6231.c b/sound/soc/codecs/rl6231.c
index a887d5c..d181c21 100644
--- a/sound/soc/codecs/rl6231.c
+++ b/sound/soc/codecs/rl6231.c
@@ -102,6 +102,7 @@ struct pll_calc_map {
 static const struct pll_calc_map pll_preset_table[] = {
 	{19200000,  4096000,  23, 14, 1, false},
 	{19200000,  24576000,  3, 30, 3, false},
+	{3840000,   24576000,  3, 30, 0, true},
 };
 
 static unsigned int find_best_div(unsigned int in,
diff --git a/sound/soc/codecs/rl6231.h b/sound/soc/codecs/rl6231.h
index 31a9643..6d8ed03 100644
--- a/sound/soc/codecs/rl6231.h
+++ b/sound/soc/codecs/rl6231.h
@@ -10,7 +10,7 @@
 #ifndef __RL6231_H__
 #define __RL6231_H__
 
-#define RL6231_PLL_INP_MAX	40000000
+#define RL6231_PLL_INP_MAX	50000000
 #define RL6231_PLL_INP_MIN	256000
 #define RL6231_PLL_N_MAX	0x1ff
 #define RL6231_PLL_K_MAX	0x1f
diff --git a/sound/soc/codecs/rt1015.c b/sound/soc/codecs/rt1015.c
index 66eb55b..bb310bc 100644
--- a/sound/soc/codecs/rt1015.c
+++ b/sound/soc/codecs/rt1015.c
@@ -444,7 +444,7 @@ static int rt1015_boost_mode_put(struct snd_kcontrol *kcontrol,
 	return 0;
 }
 
-static int rt5518_bypass_boost_get(struct snd_kcontrol *kcontrol,
+static int rt1015_bypass_boost_get(struct snd_kcontrol *kcontrol,
 		struct snd_ctl_elem_value *ucontrol)
 {
 	struct snd_soc_component *component =
@@ -457,7 +457,7 @@ static int rt5518_bypass_boost_get(struct snd_kcontrol *kcontrol,
 	return 0;
 }
 
-static int rt5518_bypass_boost_put(struct snd_kcontrol *kcontrol,
+static int rt1015_bypass_boost_put(struct snd_kcontrol *kcontrol,
 		struct snd_ctl_elem_value *ucontrol)
 {
 	struct snd_soc_component *component =
@@ -497,7 +497,7 @@ static const struct snd_kcontrol_new rt1015_snd_controls[] = {
 		rt1015_boost_mode_get, rt1015_boost_mode_put),
 	SOC_ENUM("Mono LR Select", rt1015_mono_lr_sel),
 	SOC_SINGLE_EXT("Bypass Boost", SND_SOC_NOPM, 0, 1, 0,
-		rt5518_bypass_boost_get, rt5518_bypass_boost_put),
+		rt1015_bypass_boost_get, rt1015_bypass_boost_put),
 };
 
 static int rt1015_is_sys_clk_from_pll(struct snd_soc_dapm_widget *source,
@@ -841,12 +841,12 @@ static void rt1015_remove(struct snd_soc_component *component)
 #define RT1015_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
 			SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S8)
 
-struct snd_soc_dai_ops rt1015_aif_dai_ops = {
+static struct snd_soc_dai_ops rt1015_aif_dai_ops = {
 	.hw_params = rt1015_hw_params,
 	.set_fmt = rt1015_set_dai_fmt,
 };
 
-struct snd_soc_dai_driver rt1015_dai[] = {
+static struct snd_soc_dai_driver rt1015_dai[] = {
 	{
 		.name = "rt1015-aif",
 		.id = 0,
diff --git a/sound/soc/codecs/rt1308-sdw.c b/sound/soc/codecs/rt1308-sdw.c
index d930f60..a5a7e46 100644
--- a/sound/soc/codecs/rt1308-sdw.c
+++ b/sound/soc/codecs/rt1308-sdw.c
@@ -507,6 +507,28 @@ static void rt1308_sdw_shutdown(struct snd_pcm_substream *substream,
 	kfree(stream);
 }
 
+static int rt1308_sdw_set_tdm_slot(struct snd_soc_dai *dai,
+				   unsigned int tx_mask,
+				   unsigned int rx_mask,
+				   int slots, int slot_width)
+{
+	struct snd_soc_component *component = dai->component;
+	struct rt1308_sdw_priv *rt1308 =
+		snd_soc_component_get_drvdata(component);
+
+	if (tx_mask)
+		return -EINVAL;
+
+	if (slots > 2)
+		return -EINVAL;
+
+	rt1308->rx_mask = rx_mask;
+	rt1308->slots = slots;
+	/* slot_width is not used since it's irrelevant for SoundWire */
+
+	return 0;
+}
+
 static int rt1308_sdw_hw_params(struct snd_pcm_substream *substream,
 	struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
 {
@@ -517,7 +539,7 @@ static int rt1308_sdw_hw_params(struct snd_pcm_substream *substream,
 	struct sdw_port_config port_config;
 	enum sdw_data_direction direction;
 	struct sdw_stream_data *stream;
-	int retval, port, num_channels;
+	int retval, port, num_channels, ch_mask;
 
 	dev_dbg(dai->dev, "%s %s", __func__, dai->name);
 	stream = snd_soc_dai_get_dma_data(dai, substream);
@@ -537,13 +559,20 @@ static int rt1308_sdw_hw_params(struct snd_pcm_substream *substream,
 		return -EINVAL;
 	}
 
+	if (rt1308->slots) {
+		num_channels = rt1308->slots;
+		ch_mask = rt1308->rx_mask;
+	} else {
+		num_channels = params_channels(params);
+		ch_mask = (1 << num_channels) - 1;
+	}
+
 	stream_config.frame_rate = params_rate(params);
-	stream_config.ch_count = params_channels(params);
+	stream_config.ch_count = num_channels;
 	stream_config.bps = snd_pcm_format_width(params_format(params));
 	stream_config.direction = direction;
 
-	num_channels = params_channels(params);
-	port_config.ch_mask = (1 << (num_channels)) - 1;
+	port_config.ch_mask = ch_mask;
 	port_config.num = port;
 
 	retval = sdw_stream_add_slave(rt1308->sdw_slave, &stream_config,
@@ -597,6 +626,7 @@ static const struct snd_soc_dai_ops rt1308_aif_dai_ops = {
 	.hw_free	= rt1308_sdw_pcm_hw_free,
 	.set_sdw_stream	= rt1308_set_sdw_stream,
 	.shutdown	= rt1308_sdw_shutdown,
+	.set_tdm_slot	= rt1308_sdw_set_tdm_slot,
 };
 
 #define RT1308_STEREO_RATES SNDRV_PCM_RATE_48000
diff --git a/sound/soc/codecs/rt1308-sdw.h b/sound/soc/codecs/rt1308-sdw.h
index c9341e7..c5ce756 100644
--- a/sound/soc/codecs/rt1308-sdw.h
+++ b/sound/soc/codecs/rt1308-sdw.h
@@ -160,6 +160,8 @@ struct rt1308_sdw_priv {
 	struct sdw_bus_params params;
 	bool hw_init;
 	bool first_hw_init;
+	int rx_mask;
+	int slots;
 };
 
 struct sdw_stream_data {
diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c
index 92d6701..6ba1849 100644
--- a/sound/soc/codecs/rt5645.c
+++ b/sound/soc/codecs/rt5645.c
@@ -3758,6 +3758,14 @@ static const struct dmi_system_id dmi_platform_data[] = {
 		},
 		.driver_data = (void *)&kahlee_platform_data,
 	},
+	{
+		.ident = "Medion E1239T",
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "MEDION"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "E1239T MD60568"),
+		},
+		.driver_data = (void *)&intel_braswell_platform_data,
+	},
 	{ }
 };
 
diff --git a/sound/soc/codecs/rt5659.c b/sound/soc/codecs/rt5659.c
index e66d083..89e0f58 100644
--- a/sound/soc/codecs/rt5659.c
+++ b/sound/soc/codecs/rt5659.c
@@ -1604,7 +1604,7 @@ static int set_dmic_clk(struct snd_soc_dapm_widget *w,
 {
 	struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
 	struct rt5659_priv *rt5659 = snd_soc_component_get_drvdata(component);
-	int pd, idx = -EINVAL;
+	int pd, idx;
 
 	pd = rl6231_get_pre_div(rt5659->regmap,
 		RT5659_ADDA_CLK_1, RT5659_I2S_PD1_SFT);
diff --git a/sound/soc/codecs/rt5682-sdw.c b/sound/soc/codecs/rt5682-sdw.c
new file mode 100644
index 0000000..a2d1d3a
--- /dev/null
+++ b/sound/soc/codecs/rt5682-sdw.c
@@ -0,0 +1,333 @@
+// SPDX-License-Identifier: GPL-2.0-only
+//
+// rt5682-sdw.c  --  RT5682 ALSA SoC audio component driver
+//
+// Copyright 2019 Realtek Semiconductor Corp.
+// Author: Oder Chiou <oder_chiou@realtek.com>
+//
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/acpi.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
+#include <linux/regulator/consumer.h>
+#include <linux/mutex.h>
+#include <linux/soundwire/sdw.h>
+#include <linux/soundwire/sdw_type.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/jack.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+
+#include "rt5682.h"
+#include "rt5682-sdw.h"
+
+static bool rt5682_sdw_readable_register(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case 0x00e0:
+	case 0x00f0:
+	case 0x3000:
+	case 0x3001:
+	case 0x3004:
+	case 0x3005:
+	case 0x3008:
+		return true;
+	default:
+		return false;
+	}
+}
+
+const struct regmap_config rt5682_sdw_regmap = {
+	.name = "sdw",
+	.reg_bits = 32,
+	.val_bits = 8,
+	.max_register = RT5682_I2C_MODE,
+	.readable_reg = rt5682_sdw_readable_register,
+	.cache_type = REGCACHE_NONE,
+	.use_single_read = true,
+	.use_single_write = true,
+};
+
+static int rt5682_update_status(struct sdw_slave *slave,
+					enum sdw_slave_status status)
+{
+	struct rt5682_priv *rt5682 = dev_get_drvdata(&slave->dev);
+
+	/* Update the status */
+	rt5682->status = status;
+
+	if (status == SDW_SLAVE_UNATTACHED)
+		rt5682->hw_init = false;
+
+	/*
+	 * Perform initialization only if slave status is present and
+	 * hw_init flag is false
+	 */
+	if (rt5682->hw_init || rt5682->status != SDW_SLAVE_ATTACHED)
+		return 0;
+
+	/* perform I/O transfers required for Slave initialization */
+	return rt5682_io_init(&slave->dev, slave);
+}
+
+static int rt5682_read_prop(struct sdw_slave *slave)
+{
+	struct sdw_slave_prop *prop = &slave->prop;
+	int nval, i, num_of_ports = 1;
+	u32 bit;
+	unsigned long addr;
+	struct sdw_dpn_prop *dpn;
+
+	prop->paging_support = false;
+
+	/* first we need to allocate memory for set bits in port lists */
+	prop->source_ports = 0x4;	/* BITMAP: 00000100 */
+	prop->sink_ports = 0x2;		/* BITMAP: 00000010 */
+
+	nval = hweight32(prop->source_ports);
+	num_of_ports += nval;
+	prop->src_dpn_prop = devm_kcalloc(&slave->dev, nval,
+					  sizeof(*prop->src_dpn_prop),
+					  GFP_KERNEL);
+	if (!prop->src_dpn_prop)
+		return -ENOMEM;
+
+	i = 0;
+	dpn = prop->src_dpn_prop;
+	addr = prop->source_ports;
+	for_each_set_bit(bit, &addr, 32) {
+		dpn[i].num = bit;
+		dpn[i].type = SDW_DPN_FULL;
+		dpn[i].simple_ch_prep_sm = true;
+		dpn[i].ch_prep_timeout = 10;
+		i++;
+	}
+
+	/* do this again for sink now */
+	nval = hweight32(prop->sink_ports);
+	num_of_ports += nval;
+	prop->sink_dpn_prop = devm_kcalloc(&slave->dev, nval,
+					   sizeof(*prop->sink_dpn_prop),
+					   GFP_KERNEL);
+	if (!prop->sink_dpn_prop)
+		return -ENOMEM;
+
+	i = 0;
+	dpn = prop->sink_dpn_prop;
+	addr = prop->sink_ports;
+	for_each_set_bit(bit, &addr, 32) {
+		dpn[i].num = bit;
+		dpn[i].type = SDW_DPN_FULL;
+		dpn[i].simple_ch_prep_sm = true;
+		dpn[i].ch_prep_timeout = 10;
+		i++;
+	}
+
+	/* Allocate port_ready based on num_of_ports */
+	slave->port_ready = devm_kcalloc(&slave->dev, num_of_ports,
+					 sizeof(*slave->port_ready),
+					 GFP_KERNEL);
+	if (!slave->port_ready)
+		return -ENOMEM;
+
+	/* Initialize completion */
+	for (i = 0; i < num_of_ports; i++)
+		init_completion(&slave->port_ready[i]);
+
+	/* set the timeout values */
+	prop->clk_stop_timeout = 20;
+
+	/* wake-up event */
+	prop->wake_capable = 1;
+
+	return 0;
+}
+
+/* Bus clock frequency */
+#define RT5682_CLK_FREQ_9600000HZ 9600000
+#define RT5682_CLK_FREQ_12000000HZ 12000000
+#define RT5682_CLK_FREQ_6000000HZ 6000000
+#define RT5682_CLK_FREQ_4800000HZ 4800000
+#define RT5682_CLK_FREQ_2400000HZ 2400000
+#define RT5682_CLK_FREQ_12288000HZ 12288000
+
+static int rt5682_clock_config(struct device *dev)
+{
+	struct rt5682_priv *rt5682 = dev_get_drvdata(dev);
+	unsigned int clk_freq, value;
+
+	clk_freq = (rt5682->params.curr_dr_freq >> 1);
+
+	switch (clk_freq) {
+	case RT5682_CLK_FREQ_12000000HZ:
+		value = 0x0;
+		break;
+	case RT5682_CLK_FREQ_6000000HZ:
+		value = 0x1;
+		break;
+	case RT5682_CLK_FREQ_9600000HZ:
+		value = 0x2;
+		break;
+	case RT5682_CLK_FREQ_4800000HZ:
+		value = 0x3;
+		break;
+	case RT5682_CLK_FREQ_2400000HZ:
+		value = 0x4;
+		break;
+	case RT5682_CLK_FREQ_12288000HZ:
+		value = 0x5;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	regmap_write(rt5682->sdw_regmap, 0xe0, value);
+	regmap_write(rt5682->sdw_regmap, 0xf0, value);
+
+	dev_dbg(dev, "%s complete, clk_freq=%d\n", __func__, clk_freq);
+
+	return 0;
+}
+
+static int rt5682_bus_config(struct sdw_slave *slave,
+					struct sdw_bus_params *params)
+{
+	struct rt5682_priv *rt5682 = dev_get_drvdata(&slave->dev);
+	int ret;
+
+	memcpy(&rt5682->params, params, sizeof(*params));
+
+	ret = rt5682_clock_config(&slave->dev);
+	if (ret < 0)
+		dev_err(&slave->dev, "Invalid clk config");
+
+	return ret;
+}
+
+static int rt5682_interrupt_callback(struct sdw_slave *slave,
+					struct sdw_slave_intr_status *status)
+{
+	struct rt5682_priv *rt5682 = dev_get_drvdata(&slave->dev);
+
+	dev_dbg(&slave->dev,
+		"%s control_port_stat=%x", __func__, status->control_port);
+
+	if (status->control_port & 0x4) {
+		mod_delayed_work(system_power_efficient_wq,
+			&rt5682->jack_detect_work, msecs_to_jiffies(250));
+	}
+
+	return 0;
+}
+
+static struct sdw_slave_ops rt5682_slave_ops = {
+	.read_prop = rt5682_read_prop,
+	.interrupt_callback = rt5682_interrupt_callback,
+	.update_status = rt5682_update_status,
+	.bus_config = rt5682_bus_config,
+};
+
+static int rt5682_sdw_probe(struct sdw_slave *slave,
+			   const struct sdw_device_id *id)
+{
+	struct regmap *regmap;
+
+	/* Assign ops */
+	slave->ops = &rt5682_slave_ops;
+
+	/* Regmap Initialization */
+	regmap = devm_regmap_init_sdw(slave, &rt5682_sdw_regmap);
+	if (IS_ERR(regmap))
+		return -EINVAL;
+
+	rt5682_sdw_init(&slave->dev, regmap, slave);
+
+	return 0;
+}
+
+static int rt5682_sdw_remove(struct sdw_slave *slave)
+{
+	struct rt5682_priv *rt5682 = dev_get_drvdata(&slave->dev);
+
+	if (rt5682 && rt5682->hw_init)
+		cancel_delayed_work(&rt5682->jack_detect_work);
+
+	return 0;
+}
+
+static const struct sdw_device_id rt5682_id[] = {
+	SDW_SLAVE_ENTRY(0x025d, 0x5682, 0),
+	{},
+};
+MODULE_DEVICE_TABLE(sdw, rt5682_id);
+
+static int __maybe_unused rt5682_dev_suspend(struct device *dev)
+{
+	struct rt5682_priv *rt5682 = dev_get_drvdata(dev);
+
+	if (!rt5682->hw_init)
+		return 0;
+
+	regcache_cache_only(rt5682->regmap, true);
+	regcache_mark_dirty(rt5682->regmap);
+
+	return 0;
+}
+
+static int __maybe_unused rt5682_dev_resume(struct device *dev)
+{
+	struct sdw_slave *slave = dev_to_sdw_dev(dev);
+	struct rt5682_priv *rt5682 = dev_get_drvdata(dev);
+	unsigned long time;
+
+	if (!rt5682->hw_init)
+		return 0;
+
+	if (!slave->unattach_request)
+		goto regmap_sync;
+
+	time = wait_for_completion_timeout(&slave->initialization_complete,
+				msecs_to_jiffies(RT5682_PROBE_TIMEOUT));
+	if (!time) {
+		dev_err(&slave->dev, "Initialization not complete, timed out\n");
+		return -ETIMEDOUT;
+	}
+
+regmap_sync:
+	slave->unattach_request = 0;
+	regcache_cache_only(rt5682->regmap, false);
+	regcache_sync(rt5682->regmap);
+
+	return 0;
+}
+
+static const struct dev_pm_ops rt5682_pm = {
+	SET_SYSTEM_SLEEP_PM_OPS(rt5682_dev_suspend, rt5682_dev_resume)
+	SET_RUNTIME_PM_OPS(rt5682_dev_suspend, rt5682_dev_resume, NULL)
+};
+
+static struct sdw_driver rt5682_sdw_driver = {
+	.driver = {
+		.name = "rt5682",
+		.owner = THIS_MODULE,
+		.pm = &rt5682_pm,
+	},
+	.probe = rt5682_sdw_probe,
+	.remove = rt5682_sdw_remove,
+	.ops = &rt5682_slave_ops,
+	.id_table = rt5682_id,
+};
+module_sdw_driver(rt5682_sdw_driver);
+
+MODULE_DESCRIPTION("ASoC RT5682 driver SDW");
+MODULE_AUTHOR("Oder Chiou <oder_chiou@realtek.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/sound/soc/codecs/rt5682-sdw.h b/sound/soc/codecs/rt5682-sdw.h
new file mode 100644
index 0000000..76e6f60
--- /dev/null
+++ b/sound/soc/codecs/rt5682-sdw.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0-only
+ *
+ * rt5682-sdw.h  --  RT5682 SDW ALSA SoC audio driver
+ *
+ * Copyright 2019 Realtek Semiconductor Corp.
+ * Author: Oder Chiou <oder_chiou@realtek.com>
+ */
+
+#ifndef __RT5682_SDW_H__
+#define __RT5682_SDW_H__
+
+#define RT5682_SDW_ADDR_L			0x3000
+#define RT5682_SDW_ADDR_H			0x3001
+#define RT5682_SDW_DATA_L			0x3004
+#define RT5682_SDW_DATA_H			0x3005
+#define RT5682_SDW_CMD				0x3008
+
+#define RT5682_PROBE_TIMEOUT			2000
+
+#endif /* __RT5682_SDW_H__ */
diff --git a/sound/soc/codecs/rt5682.c b/sound/soc/codecs/rt5682.c
index ae6f612..d36f560 100644
--- a/sound/soc/codecs/rt5682.c
+++ b/sound/soc/codecs/rt5682.c
@@ -11,13 +11,13 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/pm.h>
+#include <linux/pm_runtime.h>
 #include <linux/i2c.h>
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
 #include <linux/acpi.h>
 #include <linux/gpio.h>
 #include <linux/of_gpio.h>
-#include <linux/regulator/consumer.h>
 #include <linux/mutex.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
@@ -31,8 +31,7 @@
 
 #include "rl6231.h"
 #include "rt5682.h"
-
-#define RT5682_NUM_SUPPLIES 3
+#include "rt5682-sdw.h"
 
 static const char *rt5682_supply_names[RT5682_NUM_SUPPLIES] = {
 	"AVDD",
@@ -45,35 +44,15 @@ static const struct rt5682_platform_data i2s_default_platform_data = {
 	.dmic1_clk_pin = RT5682_DMIC1_CLK_GPIO3,
 	.jd_src = RT5682_JD1,
 	.btndet_delay = 16,
-};
-
-struct rt5682_priv {
-	struct snd_soc_component *component;
-	struct rt5682_platform_data pdata;
-	struct regmap *regmap;
-	struct snd_soc_jack *hs_jack;
-	struct regulator_bulk_data supplies[RT5682_NUM_SUPPLIES];
-	struct delayed_work jack_detect_work;
-	struct delayed_work jd_check_work;
-	struct mutex calibrate_mutex;
-
-	int sysclk;
-	int sysclk_src;
-	int lrck[RT5682_AIFS];
-	int bclk[RT5682_AIFS];
-	int master[RT5682_AIFS];
-
-	int pll_src;
-	int pll_in;
-	int pll_out;
-
-	int jack_type;
+	.dai_clk_names[RT5682_DAI_WCLK_IDX] = "rt5682-dai-wclk",
+	.dai_clk_names[RT5682_DAI_BCLK_IDX] = "rt5682-dai-bclk",
 };
 
 static const struct reg_sequence patch_list[] = {
 	{RT5682_HP_IMP_SENS_CTRL_19, 0x1000},
 	{RT5682_DAC_ADC_DIG_VOL1, 0xa020},
 	{RT5682_I2C_CTRL, 0x000f},
+	{RT5682_PLL2_INTERNAL, 0x8266},
 };
 
 static const struct reg_default rt5682_reg[] = {
@@ -221,7 +200,7 @@ static const struct reg_default rt5682_reg[] = {
 	{0x0148, 0x0000},
 	{0x0149, 0x0000},
 	{0x0150, 0x79a1},
-	{0x0151, 0x0000},
+	{0x0156, 0xaaaa},
 	{0x0160, 0x4ec0},
 	{0x0161, 0x0080},
 	{0x0162, 0x0200},
@@ -805,10 +784,27 @@ static const struct snd_kcontrol_new rt5682_if1_45_adc_swap_mux =
 static const struct snd_kcontrol_new rt5682_if1_67_adc_swap_mux =
 	SOC_DAPM_ENUM("IF1 67 ADC Swap Mux", rt5682_if1_67_adc_enum);
 
-static void rt5682_reset(struct regmap *regmap)
+static const char * const rt5682_dac_select[] = {
+	"IF1", "SOUND"
+};
+
+static SOC_ENUM_SINGLE_DECL(rt5682_dacl_enum,
+	RT5682_AD_DA_MIXER, RT5682_DAC1_L_SEL_SFT, rt5682_dac_select);
+
+static const struct snd_kcontrol_new rt5682_dac_l_mux =
+	SOC_DAPM_ENUM("DAC L Mux", rt5682_dacl_enum);
+
+static SOC_ENUM_SINGLE_DECL(rt5682_dacr_enum,
+	RT5682_AD_DA_MIXER, RT5682_DAC1_R_SEL_SFT, rt5682_dac_select);
+
+static const struct snd_kcontrol_new rt5682_dac_r_mux =
+	SOC_DAPM_ENUM("DAC R Mux", rt5682_dacr_enum);
+
+static void rt5682_reset(struct rt5682_priv *rt5682)
 {
-	regmap_write(regmap, RT5682_RESET, 0);
-	regmap_write(regmap, RT5682_I2C_MODE, 1);
+	regmap_write(rt5682->regmap, RT5682_RESET, 0);
+	if (!rt5682->is_sdw)
+		regmap_write(rt5682->regmap, RT5682_I2C_MODE, 1);
 }
 /**
  * rt5682_sel_asrc_clk_src - select ASRC clock source for a set of filters
@@ -871,6 +867,8 @@ static int rt5682_button_detect(struct snd_soc_component *component)
 static void rt5682_enable_push_button_irq(struct snd_soc_component *component,
 		bool enable)
 {
+	struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component);
+
 	if (enable) {
 		snd_soc_component_update_bits(component, RT5682_SAR_IL_CMD_1,
 			RT5682_SAR_BUTT_DET_MASK, RT5682_SAR_BUTT_DET_EN);
@@ -880,8 +878,15 @@ static void rt5682_enable_push_button_irq(struct snd_soc_component *component,
 		snd_soc_component_update_bits(component, RT5682_4BTN_IL_CMD_2,
 			RT5682_4BTN_IL_MASK | RT5682_4BTN_IL_RST_MASK,
 			RT5682_4BTN_IL_EN | RT5682_4BTN_IL_NOR);
-		snd_soc_component_update_bits(component, RT5682_IRQ_CTRL_3,
-			RT5682_IL_IRQ_MASK, RT5682_IL_IRQ_EN);
+		if (rt5682->is_sdw)
+			snd_soc_component_update_bits(component,
+				RT5682_IRQ_CTRL_3,
+				RT5682_IL_IRQ_MASK | RT5682_IL_IRQ_TYPE_MASK,
+				RT5682_IL_IRQ_EN | RT5682_IL_IRQ_PUL);
+		else
+			snd_soc_component_update_bits(component,
+				RT5682_IRQ_CTRL_3, RT5682_IL_IRQ_MASK,
+				RT5682_IL_IRQ_EN);
 	} else {
 		snd_soc_component_update_bits(component, RT5682_IRQ_CTRL_3,
 			RT5682_IL_IRQ_MASK, RT5682_IL_IRQ_DIS);
@@ -909,6 +914,7 @@ static int rt5682_headset_detect(struct snd_soc_component *component,
 		int jack_insert)
 {
 	struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component);
+	struct snd_soc_dapm_context *dapm = &component->dapm;
 	unsigned int val, count;
 
 	if (jack_insert) {
@@ -917,10 +923,10 @@ static int rt5682_headset_detect(struct snd_soc_component *component,
 			RT5682_PWR_VREF2 | RT5682_PWR_MB,
 			RT5682_PWR_VREF2 | RT5682_PWR_MB);
 		snd_soc_component_update_bits(component,
-				RT5682_PWR_ANLG_1, RT5682_PWR_FV2, 0);
+			RT5682_PWR_ANLG_1, RT5682_PWR_FV2, 0);
 		usleep_range(15000, 20000);
 		snd_soc_component_update_bits(component,
-				RT5682_PWR_ANLG_1, RT5682_PWR_FV2, RT5682_PWR_FV2);
+			RT5682_PWR_ANLG_1, RT5682_PWR_FV2, RT5682_PWR_FV2);
 		snd_soc_component_update_bits(component, RT5682_PWR_ANLG_3,
 			RT5682_PWR_CBJ, RT5682_PWR_CBJ);
 
@@ -951,8 +957,13 @@ static int rt5682_headset_detect(struct snd_soc_component *component,
 		rt5682_enable_push_button_irq(component, false);
 		snd_soc_component_update_bits(component, RT5682_CBJ_CTRL_1,
 			RT5682_TRIG_JD_MASK, RT5682_TRIG_JD_LOW);
-		snd_soc_component_update_bits(component, RT5682_PWR_ANLG_1,
-			RT5682_PWR_VREF2 | RT5682_PWR_MB, 0);
+		if (snd_soc_dapm_get_pin_status(dapm, "MICBIAS"))
+			snd_soc_component_update_bits(component,
+				RT5682_PWR_ANLG_1, RT5682_PWR_VREF2, 0);
+		else
+			snd_soc_component_update_bits(component,
+				RT5682_PWR_ANLG_1,
+				RT5682_PWR_VREF2 | RT5682_PWR_MB, 0);
 		snd_soc_component_update_bits(component, RT5682_PWR_ANLG_3,
 			RT5682_PWR_CBJ, 0);
 
@@ -999,62 +1010,69 @@ static int rt5682_set_jack_detect(struct snd_soc_component *component,
 
 	rt5682->hs_jack = hs_jack;
 
-	if (!hs_jack) {
-		regmap_update_bits(rt5682->regmap, RT5682_IRQ_CTRL_2,
-				   RT5682_JD1_EN_MASK, RT5682_JD1_DIS);
-		regmap_update_bits(rt5682->regmap, RT5682_RC_CLK_CTRL,
-				   RT5682_POW_JDH | RT5682_POW_JDL, 0);
-		cancel_delayed_work_sync(&rt5682->jack_detect_work);
-		return 0;
-	}
+	if (!rt5682->is_sdw) {
+		if (!hs_jack) {
+			regmap_update_bits(rt5682->regmap, RT5682_IRQ_CTRL_2,
+					   RT5682_JD1_EN_MASK, RT5682_JD1_DIS);
+			regmap_update_bits(rt5682->regmap, RT5682_RC_CLK_CTRL,
+					   RT5682_POW_JDH | RT5682_POW_JDL, 0);
+			cancel_delayed_work_sync(&rt5682->jack_detect_work);
+			return 0;
+		}
 
-	switch (rt5682->pdata.jd_src) {
-	case RT5682_JD1:
-		snd_soc_component_update_bits(component, RT5682_CBJ_CTRL_2,
-			RT5682_EXT_JD_SRC, RT5682_EXT_JD_SRC_MANUAL);
-		snd_soc_component_write(component, RT5682_CBJ_CTRL_1, 0xd042);
-		snd_soc_component_update_bits(component, RT5682_CBJ_CTRL_3,
-			RT5682_CBJ_IN_BUF_EN, RT5682_CBJ_IN_BUF_EN);
-		snd_soc_component_update_bits(component, RT5682_SAR_IL_CMD_1,
-			RT5682_SAR_POW_MASK, RT5682_SAR_POW_EN);
-		regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1,
-			RT5682_GP1_PIN_MASK, RT5682_GP1_PIN_IRQ);
-		regmap_update_bits(rt5682->regmap, RT5682_RC_CLK_CTRL,
+		switch (rt5682->pdata.jd_src) {
+		case RT5682_JD1:
+			snd_soc_component_update_bits(component,
+				RT5682_CBJ_CTRL_2, RT5682_EXT_JD_SRC,
+				RT5682_EXT_JD_SRC_MANUAL);
+			snd_soc_component_write(component, RT5682_CBJ_CTRL_1,
+				0xd042);
+			snd_soc_component_update_bits(component,
+				RT5682_CBJ_CTRL_3, RT5682_CBJ_IN_BUF_EN,
+				RT5682_CBJ_IN_BUF_EN);
+			snd_soc_component_update_bits(component,
+				RT5682_SAR_IL_CMD_1, RT5682_SAR_POW_MASK,
+				RT5682_SAR_POW_EN);
+			regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1,
+				RT5682_GP1_PIN_MASK, RT5682_GP1_PIN_IRQ);
+			regmap_update_bits(rt5682->regmap, RT5682_RC_CLK_CTRL,
 				RT5682_POW_IRQ | RT5682_POW_JDH |
 				RT5682_POW_ANA, RT5682_POW_IRQ |
 				RT5682_POW_JDH | RT5682_POW_ANA);
-		regmap_update_bits(rt5682->regmap, RT5682_PWR_ANLG_2,
-			RT5682_PWR_JDH | RT5682_PWR_JDL,
-			RT5682_PWR_JDH | RT5682_PWR_JDL);
-		regmap_update_bits(rt5682->regmap, RT5682_IRQ_CTRL_2,
-			RT5682_JD1_EN_MASK | RT5682_JD1_POL_MASK,
-			RT5682_JD1_EN | RT5682_JD1_POL_NOR);
-		regmap_update_bits(rt5682->regmap, RT5682_4BTN_IL_CMD_4,
-			0x7f7f, (rt5682->pdata.btndet_delay << 8 |
-			rt5682->pdata.btndet_delay));
-		regmap_update_bits(rt5682->regmap, RT5682_4BTN_IL_CMD_5,
-			0x7f7f, (rt5682->pdata.btndet_delay << 8 |
-			rt5682->pdata.btndet_delay));
-		regmap_update_bits(rt5682->regmap, RT5682_4BTN_IL_CMD_6,
-			0x7f7f, (rt5682->pdata.btndet_delay << 8 |
-			rt5682->pdata.btndet_delay));
-		regmap_update_bits(rt5682->regmap, RT5682_4BTN_IL_CMD_7,
-			0x7f7f, (rt5682->pdata.btndet_delay << 8 |
-			rt5682->pdata.btndet_delay));
-		mod_delayed_work(system_power_efficient_wq,
-			   &rt5682->jack_detect_work, msecs_to_jiffies(250));
-		break;
+			regmap_update_bits(rt5682->regmap, RT5682_PWR_ANLG_2,
+				RT5682_PWR_JDH | RT5682_PWR_JDL,
+				RT5682_PWR_JDH | RT5682_PWR_JDL);
+			regmap_update_bits(rt5682->regmap, RT5682_IRQ_CTRL_2,
+				RT5682_JD1_EN_MASK | RT5682_JD1_POL_MASK,
+				RT5682_JD1_EN | RT5682_JD1_POL_NOR);
+			regmap_update_bits(rt5682->regmap, RT5682_4BTN_IL_CMD_4,
+				0x7f7f, (rt5682->pdata.btndet_delay << 8 |
+				rt5682->pdata.btndet_delay));
+			regmap_update_bits(rt5682->regmap, RT5682_4BTN_IL_CMD_5,
+				0x7f7f, (rt5682->pdata.btndet_delay << 8 |
+				rt5682->pdata.btndet_delay));
+			regmap_update_bits(rt5682->regmap, RT5682_4BTN_IL_CMD_6,
+				0x7f7f, (rt5682->pdata.btndet_delay << 8 |
+				rt5682->pdata.btndet_delay));
+			regmap_update_bits(rt5682->regmap, RT5682_4BTN_IL_CMD_7,
+				0x7f7f, (rt5682->pdata.btndet_delay << 8 |
+				rt5682->pdata.btndet_delay));
+			mod_delayed_work(system_power_efficient_wq,
+				   &rt5682->jack_detect_work,
+					msecs_to_jiffies(250));
+			break;
 
-	case RT5682_JD_NULL:
-		regmap_update_bits(rt5682->regmap, RT5682_IRQ_CTRL_2,
-			RT5682_JD1_EN_MASK, RT5682_JD1_DIS);
-		regmap_update_bits(rt5682->regmap, RT5682_RC_CLK_CTRL,
-				RT5682_POW_JDH | RT5682_POW_JDL, 0);
-		break;
+		case RT5682_JD_NULL:
+			regmap_update_bits(rt5682->regmap, RT5682_IRQ_CTRL_2,
+				RT5682_JD1_EN_MASK, RT5682_JD1_DIS);
+			regmap_update_bits(rt5682->regmap, RT5682_RC_CLK_CTRL,
+					RT5682_POW_JDH | RT5682_POW_JDL, 0);
+			break;
 
-	default:
-		dev_warn(component->dev, "Wrong JD source\n");
-		break;
+		default:
+			dev_warn(component->dev, "Wrong JD source\n");
+			break;
+		}
 	}
 
 	return 0;
@@ -1134,11 +1152,13 @@ static void rt5682_jack_detect_handler(struct work_struct *work)
 			    SND_JACK_BTN_0 | SND_JACK_BTN_1 |
 			    SND_JACK_BTN_2 | SND_JACK_BTN_3);
 
-	if (rt5682->jack_type & (SND_JACK_BTN_0 | SND_JACK_BTN_1 |
-		SND_JACK_BTN_2 | SND_JACK_BTN_3))
-		schedule_delayed_work(&rt5682->jd_check_work, 0);
-	else
-		cancel_delayed_work_sync(&rt5682->jd_check_work);
+	if (!rt5682->is_sdw) {
+		if (rt5682->jack_type & (SND_JACK_BTN_0 | SND_JACK_BTN_1 |
+			SND_JACK_BTN_2 | SND_JACK_BTN_3))
+			schedule_delayed_work(&rt5682->jd_check_work, 0);
+		else
+			cancel_delayed_work_sync(&rt5682->jd_check_work);
+	}
 
 	mutex_unlock(&rt5682->calibrate_mutex);
 }
@@ -1146,7 +1166,7 @@ static void rt5682_jack_detect_handler(struct work_struct *work)
 static const struct snd_kcontrol_new rt5682_snd_controls[] = {
 	/* DAC Digital Volume */
 	SOC_DOUBLE_TLV("DAC1 Playback Volume", RT5682_DAC1_DIG_VOL,
-		RT5682_L_VOL_SFT + 1, RT5682_R_VOL_SFT + 1, 86, 0, dac_vol_tlv),
+		RT5682_L_VOL_SFT + 1, RT5682_R_VOL_SFT + 1, 87, 0, dac_vol_tlv),
 
 	/* IN Boost Volume */
 	SOC_SINGLE_TLV("CBJ Boost Volume", RT5682_CBJ_BST_CTRL,
@@ -1177,11 +1197,11 @@ static int rt5682_div_sel(struct rt5682_priv *rt5682,
 	}
 
 	for (i = 0; i < size - 1; i++) {
-		pr_info("div[%d]=%d\n", i, div[i]);
+		dev_dbg(rt5682->component->dev, "div[%d]=%d\n", i, div[i]);
 		if (target * div[i] == rt5682->sysclk)
 			return i;
 		if (target * div[i + 1] > rt5682->sysclk) {
-			pr_err("can't find div for sysclk %d\n",
+			dev_dbg(rt5682->component->dev, "can't find div for sysclk %d\n",
 				rt5682->sysclk);
 			return i;
 		}
@@ -1211,10 +1231,13 @@ static int set_dmic_clk(struct snd_soc_dapm_widget *w,
 	struct snd_soc_component *component =
 		snd_soc_dapm_to_component(w->dapm);
 	struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component);
-	int idx = -EINVAL;
+	int idx = -EINVAL, dmic_clk_rate = 3072000;
 	static const int div[] = {2, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128};
 
-	idx = rt5682_div_sel(rt5682, 1500000, div, ARRAY_SIZE(div));
+	if (rt5682->pdata.dmic_clk_rate)
+		dmic_clk_rate = rt5682->pdata.dmic_clk_rate;
+
+	idx = rt5682_div_sel(rt5682, dmic_clk_rate, div, ARRAY_SIZE(div));
 
 	snd_soc_component_update_bits(component, RT5682_DMIC_CTRL_1,
 		RT5682_DMIC_CLK_MASK, idx << RT5682_DMIC_CLK_SFT);
@@ -1232,6 +1255,9 @@ static int set_filter_clk(struct snd_soc_dapm_widget *w,
 	static const int div_f[] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32, 48};
 	static const int div_o[] = {1, 2, 4, 6, 8, 12, 16, 24, 32, 48};
 
+	if (rt5682->is_sdw)
+		return 0;
+
 	val = snd_soc_component_read32(component, RT5682_GPIO_CTRL_1) &
 		RT5682_GP4_PIN_MASK;
 	if (w->shift == RT5682_PWR_ADC_S1F_BIT &&
@@ -1278,6 +1304,21 @@ static int is_sys_clk_from_pll1(struct snd_soc_dapm_widget *w,
 		return 0;
 }
 
+static int is_sys_clk_from_pll2(struct snd_soc_dapm_widget *w,
+			 struct snd_soc_dapm_widget *sink)
+{
+	unsigned int val;
+	struct snd_soc_component *component =
+		snd_soc_dapm_to_component(w->dapm);
+
+	val = snd_soc_component_read32(component, RT5682_GLB_CLK);
+	val &= RT5682_SCLK_SRC_MASK;
+	if (val == RT5682_SCLK_SRC_PLL2)
+		return 1;
+	else
+		return 0;
+}
+
 static int is_using_asrc(struct snd_soc_dapm_widget *w,
 			 struct snd_soc_dapm_widget *sink)
 {
@@ -1503,10 +1544,18 @@ static int rt5682_hp_event(struct snd_soc_dapm_widget *w,
 static int set_dmic_power(struct snd_soc_dapm_widget *w,
 	struct snd_kcontrol *kcontrol, int event)
 {
+	struct snd_soc_component *component =
+		snd_soc_dapm_to_component(w->dapm);
+	struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component);
+	unsigned int delay = 50;
+
+	if (rt5682->pdata.dmic_delay)
+		delay = rt5682->pdata.dmic_delay;
+
 	switch (event) {
 	case SND_SOC_DAPM_POST_PMU:
 		/*Add delay to avoid pop noise*/
-		msleep(150);
+		msleep(delay);
 		break;
 
 	default:
@@ -1516,7 +1565,7 @@ static int set_dmic_power(struct snd_soc_dapm_widget *w,
 	return 0;
 }
 
-static int rt5655_set_verf(struct snd_soc_dapm_widget *w,
+static int rt5682_set_verf(struct snd_soc_dapm_widget *w,
 	struct snd_kcontrol *kcontrol, int event)
 {
 	struct snd_soc_component *component =
@@ -1592,9 +1641,12 @@ static const struct snd_soc_dapm_widget rt5682_dapm_widgets[] = {
 	SND_SOC_DAPM_SUPPLY("PLL2B", RT5682_PWR_ANLG_3, RT5682_PWR_PLL2B_BIT,
 		0, NULL, 0),
 	SND_SOC_DAPM_SUPPLY("PLL2F", RT5682_PWR_ANLG_3, RT5682_PWR_PLL2F_BIT,
-		0, NULL, 0),
+		0, set_filter_clk, SND_SOC_DAPM_PRE_PMU),
 	SND_SOC_DAPM_SUPPLY("Vref1", RT5682_PWR_ANLG_1, RT5682_PWR_VREF1_BIT, 0,
-		rt5655_set_verf, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU),
+		rt5682_set_verf, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU),
+	SND_SOC_DAPM_SUPPLY("Vref2", RT5682_PWR_ANLG_1, RT5682_PWR_VREF2_BIT, 0,
+		NULL, 0),
+	SND_SOC_DAPM_SUPPLY("MICBIAS", SND_SOC_NOPM, 0, 0, NULL, 0),
 
 	/* ASRC */
 	SND_SOC_DAPM_SUPPLY_S("DAC STO1 ASRC", 1, RT5682_PLL_TRACK_1,
@@ -1686,6 +1738,8 @@ static const struct snd_soc_dapm_widget rt5682_dapm_widgets[] = {
 	SND_SOC_DAPM_PGA("IF1 DAC1", SND_SOC_NOPM, 0, 0, NULL, 0),
 	SND_SOC_DAPM_PGA("IF1 DAC1 L", SND_SOC_NOPM, 0, 0, NULL, 0),
 	SND_SOC_DAPM_PGA("IF1 DAC1 R", SND_SOC_NOPM, 0, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("SOUND DAC L", SND_SOC_NOPM, 0, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("SOUND DAC R", SND_SOC_NOPM, 0, 0, NULL, 0),
 
 	/* Digital Interface Select */
 	SND_SOC_DAPM_MUX("IF1 01 ADC Swap Mux", SND_SOC_NOPM, 0, 0,
@@ -1702,12 +1756,19 @@ static const struct snd_soc_dapm_widget rt5682_dapm_widgets[] = {
 	SND_SOC_DAPM_MUX("ADCDAT Mux", SND_SOC_NOPM, 0, 0,
 			&rt5682_adcdat_pin_ctrl),
 
+	SND_SOC_DAPM_MUX("DAC L Mux", SND_SOC_NOPM, 0, 0,
+			&rt5682_dac_l_mux),
+	SND_SOC_DAPM_MUX("DAC R Mux", SND_SOC_NOPM, 0, 0,
+			&rt5682_dac_r_mux),
+
 	/* Audio Interface */
 	SND_SOC_DAPM_AIF_OUT("AIF1TX", "AIF1 Capture", 0,
 		RT5682_I2S1_SDP, RT5682_SEL_ADCDAT_SFT, 1),
 	SND_SOC_DAPM_AIF_OUT("AIF2TX", "AIF2 Capture", 0,
 		RT5682_I2S2_SDP, RT5682_I2S2_PIN_CFG_SFT, 1),
 	SND_SOC_DAPM_AIF_IN("AIF1RX", "AIF1 Playback", 0, SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_AIF_IN("SDWRX", "SDW Playback", 0, SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_AIF_OUT("SDWTX", "SDW Capture", 0, SND_SOC_NOPM, 0, 0),
 
 	/* Output Side */
 	/* DAC mixer before sound effect  */
@@ -1776,7 +1837,11 @@ static const struct snd_soc_dapm_widget rt5682_dapm_widgets[] = {
 static const struct snd_soc_dapm_route rt5682_dapm_routes[] = {
 	/*PLL*/
 	{"ADC Stereo1 Filter", NULL, "PLL1", is_sys_clk_from_pll1},
+	{"ADC Stereo1 Filter", NULL, "PLL2B", is_sys_clk_from_pll2},
+	{"ADC Stereo1 Filter", NULL, "PLL2F", is_sys_clk_from_pll2},
 	{"DAC Stereo1 Filter", NULL, "PLL1", is_sys_clk_from_pll1},
+	{"DAC Stereo1 Filter", NULL, "PLL2B", is_sys_clk_from_pll2},
+	{"DAC Stereo1 Filter", NULL, "PLL2F", is_sys_clk_from_pll2},
 
 	/*ASRC*/
 	{"ADC Stereo1 Filter", NULL, "ADC STO1 ASRC", is_using_asrc},
@@ -1860,8 +1925,8 @@ static const struct snd_soc_dapm_route rt5682_dapm_routes[] = {
 	{"IF1_ADC Mux", "Slot 2", "IF1 23 ADC Swap Mux"},
 	{"IF1_ADC Mux", "Slot 4", "IF1 45 ADC Swap Mux"},
 	{"IF1_ADC Mux", "Slot 6", "IF1 67 ADC Swap Mux"},
-	{"IF1_ADC Mux", NULL, "I2S1"},
 	{"ADCDAT Mux", "ADCDAT1", "IF1_ADC Mux"},
+	{"AIF1TX", NULL, "I2S1"},
 	{"AIF1TX", NULL, "ADCDAT Mux"},
 	{"IF2 ADC Swap Mux", "L/R", "Stereo1 ADC MIX"},
 	{"IF2 ADC Swap Mux", "R/L", "Stereo1 ADC MIX"},
@@ -1870,6 +1935,10 @@ static const struct snd_soc_dapm_route rt5682_dapm_routes[] = {
 	{"ADCDAT Mux", "ADCDAT2", "IF2 ADC Swap Mux"},
 	{"AIF2TX", NULL, "ADCDAT Mux"},
 
+	{"SDWTX", NULL, "PLL2B"},
+	{"SDWTX", NULL, "PLL2F"},
+	{"SDWTX", NULL, "ADCDAT Mux"},
+
 	{"IF1 DAC1 L", NULL, "AIF1RX"},
 	{"IF1 DAC1 L", NULL, "I2S1"},
 	{"IF1 DAC1 L", NULL, "DAC Stereo1 Filter"},
@@ -1877,10 +1946,24 @@ static const struct snd_soc_dapm_route rt5682_dapm_routes[] = {
 	{"IF1 DAC1 R", NULL, "I2S1"},
 	{"IF1 DAC1 R", NULL, "DAC Stereo1 Filter"},
 
+	{"SOUND DAC L", NULL, "SDWRX"},
+	{"SOUND DAC L", NULL, "DAC Stereo1 Filter"},
+	{"SOUND DAC L", NULL, "PLL2B"},
+	{"SOUND DAC L", NULL, "PLL2F"},
+	{"SOUND DAC R", NULL, "SDWRX"},
+	{"SOUND DAC R", NULL, "DAC Stereo1 Filter"},
+	{"SOUND DAC R", NULL, "PLL2B"},
+	{"SOUND DAC R", NULL, "PLL2F"},
+
+	{"DAC L Mux", "IF1", "IF1 DAC1 L"},
+	{"DAC L Mux", "SOUND", "SOUND DAC L"},
+	{"DAC R Mux", "IF1", "IF1 DAC1 R"},
+	{"DAC R Mux", "SOUND", "SOUND DAC R"},
+
 	{"DAC1 MIXL", "Stereo ADC Switch", "Stereo1 ADC MIXL"},
-	{"DAC1 MIXL", "DAC1 Switch", "IF1 DAC1 L"},
+	{"DAC1 MIXL", "DAC1 Switch", "DAC L Mux"},
 	{"DAC1 MIXR", "Stereo ADC Switch", "Stereo1 ADC MIXR"},
-	{"DAC1 MIXR", "DAC1 Switch", "IF1 DAC1 R"},
+	{"DAC1 MIXR", "DAC1 Switch", "DAC R Mux"},
 
 	{"Stereo1 DAC MIXL", "DAC L1 Switch", "DAC1 MIXL"},
 	{"Stereo1 DAC MIXL", "DAC R1 Switch", "DAC1 MIXR"},
@@ -2033,8 +2116,10 @@ static int rt5682_hw_params(struct snd_pcm_substream *substream,
 			RT5682_I2S1_DL_MASK, len_1);
 		if (rt5682->master[RT5682_AIF1]) {
 			snd_soc_component_update_bits(component,
-				RT5682_ADDA_CLK_1, RT5682_I2S_M_DIV_MASK,
-				pre_div << RT5682_I2S_M_DIV_SFT);
+				RT5682_ADDA_CLK_1, RT5682_I2S_M_DIV_MASK |
+				RT5682_I2S_CLK_SRC_MASK,
+				pre_div << RT5682_I2S_M_DIV_SFT |
+				(rt5682->sysclk_src) << RT5682_I2S_CLK_SRC_SFT);
 		}
 		if (params_channels(params) == 1) /* mono mode */
 			snd_soc_component_update_bits(component,
@@ -2207,61 +2292,157 @@ static int rt5682_set_component_pll(struct snd_soc_component *component,
 		unsigned int freq_out)
 {
 	struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component);
-	struct rl6231_pll_code pll_code;
+	struct rl6231_pll_code pll_code, pll2f_code, pll2b_code;
+	unsigned int pll2_fout1;
 	int ret;
 
-	if (source == rt5682->pll_src && freq_in == rt5682->pll_in &&
-	    freq_out == rt5682->pll_out)
+	if (source == rt5682->pll_src[pll_id] &&
+	    freq_in == rt5682->pll_in[pll_id] &&
+	    freq_out == rt5682->pll_out[pll_id])
 		return 0;
 
 	if (!freq_in || !freq_out) {
 		dev_dbg(component->dev, "PLL disabled\n");
 
-		rt5682->pll_in = 0;
-		rt5682->pll_out = 0;
+		rt5682->pll_in[pll_id] = 0;
+		rt5682->pll_out[pll_id] = 0;
 		snd_soc_component_update_bits(component, RT5682_GLB_CLK,
 			RT5682_SCLK_SRC_MASK, RT5682_SCLK_SRC_MCLK);
 		return 0;
 	}
 
-	switch (source) {
-	case RT5682_PLL1_S_MCLK:
-		snd_soc_component_update_bits(component, RT5682_GLB_CLK,
-			RT5682_PLL1_SRC_MASK, RT5682_PLL1_SRC_MCLK);
-		break;
-	case RT5682_PLL1_S_BCLK1:
-		snd_soc_component_update_bits(component, RT5682_GLB_CLK,
-				RT5682_PLL1_SRC_MASK, RT5682_PLL1_SRC_BCLK1);
-		break;
-	default:
-		dev_err(component->dev, "Unknown PLL Source %d\n", source);
-		return -EINVAL;
+	if (pll_id == RT5682_PLL2) {
+		switch (source) {
+		case RT5682_PLL2_S_MCLK:
+			snd_soc_component_update_bits(component,
+				RT5682_GLB_CLK, RT5682_PLL2_SRC_MASK,
+				RT5682_PLL2_SRC_MCLK);
+			break;
+		default:
+			dev_err(component->dev, "Unknown PLL2 Source %d\n",
+				source);
+			return -EINVAL;
+		}
+
+		/**
+		 * PLL2 concatenates 2 PLL units.
+		 * We suggest the Fout of the front PLL is 3.84MHz.
+		 */
+		pll2_fout1 = 3840000;
+		ret = rl6231_pll_calc(freq_in, pll2_fout1, &pll2f_code);
+		if (ret < 0) {
+			dev_err(component->dev, "Unsupport input clock %d\n",
+				freq_in);
+			return ret;
+		}
+		dev_dbg(component->dev, "PLL2F: fin=%d fout=%d bypass=%d m=%d n=%d k=%d\n",
+			freq_in, pll2_fout1,
+			pll2f_code.m_bp,
+			(pll2f_code.m_bp ? 0 : pll2f_code.m_code),
+			pll2f_code.n_code, pll2f_code.k_code);
+
+		ret = rl6231_pll_calc(pll2_fout1, freq_out, &pll2b_code);
+		if (ret < 0) {
+			dev_err(component->dev, "Unsupport input clock %d\n",
+				pll2_fout1);
+			return ret;
+		}
+		dev_dbg(component->dev, "PLL2B: fin=%d fout=%d bypass=%d m=%d n=%d k=%d\n",
+			pll2_fout1, freq_out,
+			pll2b_code.m_bp,
+			(pll2b_code.m_bp ? 0 : pll2b_code.m_code),
+			pll2b_code.n_code, pll2b_code.k_code);
+
+		snd_soc_component_write(component, RT5682_PLL2_CTRL_1,
+			pll2f_code.k_code << RT5682_PLL2F_K_SFT |
+			pll2b_code.k_code << RT5682_PLL2B_K_SFT |
+			pll2b_code.m_code);
+		snd_soc_component_write(component, RT5682_PLL2_CTRL_2,
+			pll2f_code.m_code << RT5682_PLL2F_M_SFT |
+			pll2b_code.n_code);
+		snd_soc_component_write(component, RT5682_PLL2_CTRL_3,
+			pll2f_code.n_code << RT5682_PLL2F_N_SFT);
+		snd_soc_component_update_bits(component, RT5682_PLL2_CTRL_4,
+			RT5682_PLL2B_M_BP_MASK | RT5682_PLL2F_M_BP_MASK | 0xf,
+			(pll2b_code.m_bp ? 1 : 0) << RT5682_PLL2B_M_BP_SFT |
+			(pll2f_code.m_bp ? 1 : 0) << RT5682_PLL2F_M_BP_SFT |
+			0xf);
+	} else {
+		switch (source) {
+		case RT5682_PLL1_S_MCLK:
+			snd_soc_component_update_bits(component,
+				RT5682_GLB_CLK, RT5682_PLL1_SRC_MASK,
+				RT5682_PLL1_SRC_MCLK);
+			break;
+		case RT5682_PLL1_S_BCLK1:
+			snd_soc_component_update_bits(component,
+				RT5682_GLB_CLK, RT5682_PLL1_SRC_MASK,
+				RT5682_PLL1_SRC_BCLK1);
+			break;
+		default:
+			dev_err(component->dev, "Unknown PLL1 Source %d\n",
+				source);
+			return -EINVAL;
+		}
+
+		ret = rl6231_pll_calc(freq_in, freq_out, &pll_code);
+		if (ret < 0) {
+			dev_err(component->dev, "Unsupport input clock %d\n",
+				freq_in);
+			return ret;
+		}
+
+		dev_dbg(component->dev, "bypass=%d m=%d n=%d k=%d\n",
+			pll_code.m_bp, (pll_code.m_bp ? 0 : pll_code.m_code),
+			pll_code.n_code, pll_code.k_code);
+
+		snd_soc_component_write(component, RT5682_PLL_CTRL_1,
+			pll_code.n_code << RT5682_PLL_N_SFT | pll_code.k_code);
+		snd_soc_component_write(component, RT5682_PLL_CTRL_2,
+		    (pll_code.m_bp ? 0 : pll_code.m_code) << RT5682_PLL_M_SFT |
+		    pll_code.m_bp << RT5682_PLL_M_BP_SFT | RT5682_PLL_RST);
 	}
 
-	ret = rl6231_pll_calc(freq_in, freq_out, &pll_code);
-	if (ret < 0) {
-		dev_err(component->dev, "Unsupport input clock %d\n", freq_in);
-		return ret;
-	}
-
-	dev_dbg(component->dev, "bypass=%d m=%d n=%d k=%d\n",
-		pll_code.m_bp, (pll_code.m_bp ? 0 : pll_code.m_code),
-		pll_code.n_code, pll_code.k_code);
-
-	snd_soc_component_write(component, RT5682_PLL_CTRL_1,
-		pll_code.n_code << RT5682_PLL_N_SFT | pll_code.k_code);
-	snd_soc_component_write(component, RT5682_PLL_CTRL_2,
-		(pll_code.m_bp ? 0 : pll_code.m_code) << RT5682_PLL_M_SFT |
-		pll_code.m_bp << RT5682_PLL_M_BP_SFT | RT5682_PLL_RST);
-
-	rt5682->pll_in = freq_in;
-	rt5682->pll_out = freq_out;
-	rt5682->pll_src = source;
+	rt5682->pll_in[pll_id] = freq_in;
+	rt5682->pll_out[pll_id] = freq_out;
+	rt5682->pll_src[pll_id] = source;
 
 	return 0;
 }
 
-static int rt5682_set_bclk_ratio(struct snd_soc_dai *dai, unsigned int ratio)
+static int rt5682_set_bclk1_ratio(struct snd_soc_dai *dai, unsigned int ratio)
+{
+	struct snd_soc_component *component = dai->component;
+	struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component);
+
+	rt5682->bclk[dai->id] = ratio;
+
+	switch (ratio) {
+	case 256:
+		snd_soc_component_update_bits(component, RT5682_TDM_TCON_CTRL,
+			RT5682_TDM_BCLK_MS1_MASK, RT5682_TDM_BCLK_MS1_256);
+		break;
+	case 128:
+		snd_soc_component_update_bits(component, RT5682_TDM_TCON_CTRL,
+			RT5682_TDM_BCLK_MS1_MASK, RT5682_TDM_BCLK_MS1_128);
+		break;
+	case 64:
+		snd_soc_component_update_bits(component, RT5682_TDM_TCON_CTRL,
+			RT5682_TDM_BCLK_MS1_MASK, RT5682_TDM_BCLK_MS1_64);
+		break;
+	case 32:
+		snd_soc_component_update_bits(component, RT5682_TDM_TCON_CTRL,
+			RT5682_TDM_BCLK_MS1_MASK, RT5682_TDM_BCLK_MS1_32);
+		break;
+	default:
+		dev_err(dai->dev, "Invalid bclk1 ratio %d\n", ratio);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int rt5682_set_bclk2_ratio(struct snd_soc_dai *dai, unsigned int ratio)
 {
 	struct snd_soc_component *component = dai->component;
 	struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component);
@@ -2280,7 +2461,7 @@ static int rt5682_set_bclk_ratio(struct snd_soc_dai *dai, unsigned int ratio)
 			RT5682_I2S2_BCLK_MS2_32);
 		break;
 	default:
-		dev_err(dai->dev, "Invalid bclk ratio %d\n", ratio);
+		dev_err(dai->dev, "Invalid bclk2 ratio %d\n", ratio);
 		return -EINVAL;
 	}
 
@@ -2319,12 +2500,392 @@ static int rt5682_set_bias_level(struct snd_soc_component *component,
 	return 0;
 }
 
+#ifdef CONFIG_COMMON_CLK
+#define CLK_PLL2_FIN 48000000
+#define CLK_PLL2_FOUT 24576000
+#define CLK_48 48000
+
+static bool rt5682_clk_check(struct rt5682_priv *rt5682)
+{
+	if (!rt5682->master[RT5682_AIF1]) {
+		dev_err(rt5682->component->dev, "sysclk/dai not set correctly\n");
+		return false;
+	}
+	return true;
+}
+
+static int rt5682_wclk_prepare(struct clk_hw *hw)
+{
+	struct rt5682_priv *rt5682 =
+		container_of(hw, struct rt5682_priv,
+			     dai_clks_hw[RT5682_DAI_WCLK_IDX]);
+	struct snd_soc_component *component = rt5682->component;
+	struct snd_soc_dapm_context *dapm =
+			snd_soc_component_get_dapm(component);
+
+	if (!rt5682_clk_check(rt5682))
+		return -EINVAL;
+
+	snd_soc_dapm_mutex_lock(dapm);
+
+	snd_soc_dapm_force_enable_pin_unlocked(dapm, "MICBIAS");
+	snd_soc_component_update_bits(component, RT5682_PWR_ANLG_1,
+				RT5682_PWR_MB, RT5682_PWR_MB);
+	snd_soc_dapm_force_enable_pin_unlocked(dapm, "I2S1");
+	snd_soc_dapm_force_enable_pin_unlocked(dapm, "PLL2F");
+	snd_soc_dapm_force_enable_pin_unlocked(dapm, "PLL2B");
+	snd_soc_dapm_sync_unlocked(dapm);
+
+	snd_soc_dapm_mutex_unlock(dapm);
+
+	return 0;
+}
+
+static void rt5682_wclk_unprepare(struct clk_hw *hw)
+{
+	struct rt5682_priv *rt5682 =
+		container_of(hw, struct rt5682_priv,
+			     dai_clks_hw[RT5682_DAI_WCLK_IDX]);
+	struct snd_soc_component *component = rt5682->component;
+	struct snd_soc_dapm_context *dapm =
+			snd_soc_component_get_dapm(component);
+
+	if (!rt5682_clk_check(rt5682))
+		return;
+
+	snd_soc_dapm_mutex_lock(dapm);
+
+	snd_soc_dapm_disable_pin_unlocked(dapm, "MICBIAS");
+	if (!rt5682->jack_type)
+		snd_soc_component_update_bits(component, RT5682_PWR_ANLG_1,
+				RT5682_PWR_MB, 0);
+	snd_soc_dapm_disable_pin_unlocked(dapm, "I2S1");
+	snd_soc_dapm_disable_pin_unlocked(dapm, "PLL2F");
+	snd_soc_dapm_disable_pin_unlocked(dapm, "PLL2B");
+	snd_soc_dapm_sync_unlocked(dapm);
+
+	snd_soc_dapm_mutex_unlock(dapm);
+}
+
+static unsigned long rt5682_wclk_recalc_rate(struct clk_hw *hw,
+					     unsigned long parent_rate)
+{
+	struct rt5682_priv *rt5682 =
+		container_of(hw, struct rt5682_priv,
+			     dai_clks_hw[RT5682_DAI_WCLK_IDX]);
+
+	if (!rt5682_clk_check(rt5682))
+		return 0;
+	/*
+	 * Only accept to set wclk rate to 48kHz temporarily.
+	 */
+	return CLK_48;
+}
+
+static long rt5682_wclk_round_rate(struct clk_hw *hw, unsigned long rate,
+				   unsigned long *parent_rate)
+{
+	struct rt5682_priv *rt5682 =
+		container_of(hw, struct rt5682_priv,
+			     dai_clks_hw[RT5682_DAI_WCLK_IDX]);
+
+	if (!rt5682_clk_check(rt5682))
+		return -EINVAL;
+	/*
+	 * Only accept to set wclk rate to 48kHz temporarily.
+	 */
+	return CLK_48;
+}
+
+static int rt5682_wclk_set_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long parent_rate)
+{
+	struct rt5682_priv *rt5682 =
+		container_of(hw, struct rt5682_priv,
+			     dai_clks_hw[RT5682_DAI_WCLK_IDX]);
+	struct snd_soc_component *component = rt5682->component;
+	struct clk *parent_clk;
+	const char * const clk_name = __clk_get_name(hw->clk);
+	int pre_div;
+
+	if (!rt5682_clk_check(rt5682))
+		return -EINVAL;
+
+	/*
+	 * Whether the wclk's parent clk (mclk) exists or not, please ensure
+	 * it is fixed or set to 48MHz before setting wclk rate. It's a
+	 * temporary limitation. Only accept 48MHz clk as the clk provider.
+	 *
+	 * It will set the codec anyway by assuming mclk is 48MHz.
+	 */
+	parent_clk = clk_get_parent(hw->clk);
+	if (!parent_clk)
+		dev_warn(component->dev,
+			"Parent mclk of wclk not acquired in driver. Please ensure mclk was provided as %d Hz.\n",
+			CLK_PLL2_FIN);
+
+	if (parent_rate != CLK_PLL2_FIN)
+		dev_warn(component->dev, "clk %s only support %d Hz input\n",
+			clk_name, CLK_PLL2_FIN);
+
+	/*
+	 * It's a temporary limitation. Only accept to set wclk rate to 48kHz.
+	 * It will force wclk to 48kHz even it's not.
+	 */
+	if (rate != CLK_48) {
+		dev_warn(component->dev, "clk %s only support %d Hz output\n",
+			clk_name, CLK_48);
+		rate = CLK_48;
+	}
+
+	/*
+	 * To achieve the rate conversion from 48MHz to 48kHz, PLL2 is needed.
+	 */
+	rt5682_set_component_pll(component, RT5682_PLL2, RT5682_PLL2_S_MCLK,
+		CLK_PLL2_FIN, CLK_PLL2_FOUT);
+
+	rt5682_set_component_sysclk(component, RT5682_SCLK_S_PLL2, 0,
+		CLK_PLL2_FOUT, SND_SOC_CLOCK_IN);
+
+	pre_div = rl6231_get_clk_info(rt5682->sysclk, rate);
+
+	snd_soc_component_update_bits(component, RT5682_ADDA_CLK_1,
+		RT5682_I2S_M_DIV_MASK | RT5682_I2S_CLK_SRC_MASK,
+		pre_div << RT5682_I2S_M_DIV_SFT |
+		(rt5682->sysclk_src) << RT5682_I2S_CLK_SRC_SFT);
+
+	return 0;
+}
+
+static unsigned long rt5682_bclk_recalc_rate(struct clk_hw *hw,
+					     unsigned long parent_rate)
+{
+	struct rt5682_priv *rt5682 =
+		container_of(hw, struct rt5682_priv,
+			     dai_clks_hw[RT5682_DAI_BCLK_IDX]);
+	struct snd_soc_component *component = rt5682->component;
+	unsigned int bclks_per_wclk;
+
+	snd_soc_component_read(component, RT5682_TDM_TCON_CTRL,
+				&bclks_per_wclk);
+
+	switch (bclks_per_wclk & RT5682_TDM_BCLK_MS1_MASK) {
+	case RT5682_TDM_BCLK_MS1_256:
+		return parent_rate * 256;
+	case RT5682_TDM_BCLK_MS1_128:
+		return parent_rate * 128;
+	case RT5682_TDM_BCLK_MS1_64:
+		return parent_rate * 64;
+	case RT5682_TDM_BCLK_MS1_32:
+		return parent_rate * 32;
+	default:
+		return 0;
+	}
+}
+
+static unsigned long rt5682_bclk_get_factor(unsigned long rate,
+					    unsigned long parent_rate)
+{
+	unsigned long factor;
+
+	factor = rate / parent_rate;
+	if (factor < 64)
+		return 32;
+	else if (factor < 128)
+		return 64;
+	else if (factor < 256)
+		return 128;
+	else
+		return 256;
+}
+
+static long rt5682_bclk_round_rate(struct clk_hw *hw, unsigned long rate,
+				   unsigned long *parent_rate)
+{
+	struct rt5682_priv *rt5682 =
+		container_of(hw, struct rt5682_priv,
+			     dai_clks_hw[RT5682_DAI_BCLK_IDX]);
+	unsigned long factor;
+
+	if (!*parent_rate || !rt5682_clk_check(rt5682))
+		return -EINVAL;
+
+	/*
+	 * BCLK rates are set as a multiplier of WCLK in HW.
+	 * We don't allow changing the parent WCLK. We just do
+	 * some rounding down based on the parent WCLK rate
+	 * and find the appropriate multiplier of BCLK to
+	 * get the rounded down BCLK value.
+	 */
+	factor = rt5682_bclk_get_factor(rate, *parent_rate);
+
+	return *parent_rate * factor;
+}
+
+static int rt5682_bclk_set_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long parent_rate)
+{
+	struct rt5682_priv *rt5682 =
+		container_of(hw, struct rt5682_priv,
+			     dai_clks_hw[RT5682_DAI_BCLK_IDX]);
+	struct snd_soc_component *component = rt5682->component;
+	struct snd_soc_dai *dai = NULL;
+	unsigned long factor;
+
+	if (!rt5682_clk_check(rt5682))
+		return -EINVAL;
+
+	factor = rt5682_bclk_get_factor(rate, parent_rate);
+
+	for_each_component_dais(component, dai)
+		if (dai->id == RT5682_AIF1)
+			break;
+	if (!dai) {
+		dev_err(component->dev, "dai %d not found in component\n",
+			RT5682_AIF1);
+		return -ENODEV;
+	}
+
+	return rt5682_set_bclk1_ratio(dai, factor);
+}
+
+static const struct clk_ops rt5682_dai_clk_ops[RT5682_DAI_NUM_CLKS] = {
+	[RT5682_DAI_WCLK_IDX] = {
+		.prepare = rt5682_wclk_prepare,
+		.unprepare = rt5682_wclk_unprepare,
+		.recalc_rate = rt5682_wclk_recalc_rate,
+		.round_rate = rt5682_wclk_round_rate,
+		.set_rate = rt5682_wclk_set_rate,
+	},
+	[RT5682_DAI_BCLK_IDX] = {
+		.recalc_rate = rt5682_bclk_recalc_rate,
+		.round_rate = rt5682_bclk_round_rate,
+		.set_rate = rt5682_bclk_set_rate,
+	},
+};
+
+static int rt5682_register_dai_clks(struct snd_soc_component *component)
+{
+	struct device *dev = component->dev;
+	struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component);
+	struct rt5682_platform_data *pdata = &rt5682->pdata;
+	struct clk_init_data init;
+	struct clk *dai_clk;
+	struct clk_lookup *dai_clk_lookup;
+	struct clk_hw *dai_clk_hw;
+	const char *parent_name;
+	int i, ret;
+
+	for (i = 0; i < RT5682_DAI_NUM_CLKS; ++i) {
+		dai_clk_hw = &rt5682->dai_clks_hw[i];
+
+		switch (i) {
+		case RT5682_DAI_WCLK_IDX:
+			/* Make MCLK the parent of WCLK */
+			if (rt5682->mclk) {
+				parent_name = __clk_get_name(rt5682->mclk);
+				init.parent_names = &parent_name;
+				init.num_parents = 1;
+			} else {
+				init.parent_names = NULL;
+				init.num_parents = 0;
+			}
+			break;
+		case RT5682_DAI_BCLK_IDX:
+			/* Make WCLK the parent of BCLK */
+			parent_name = __clk_get_name(
+				rt5682->dai_clks[RT5682_DAI_WCLK_IDX]);
+			init.parent_names = &parent_name;
+			init.num_parents = 1;
+			break;
+		default:
+			dev_err(dev, "Invalid clock index\n");
+			ret = -EINVAL;
+			goto err;
+		}
+
+		init.name = pdata->dai_clk_names[i];
+		init.ops = &rt5682_dai_clk_ops[i];
+		init.flags = CLK_GET_RATE_NOCACHE | CLK_SET_RATE_GATE;
+		dai_clk_hw->init = &init;
+
+		dai_clk = devm_clk_register(dev, dai_clk_hw);
+		if (IS_ERR(dai_clk)) {
+			dev_warn(dev, "Failed to register %s: %ld\n",
+				 init.name, PTR_ERR(dai_clk));
+			ret = PTR_ERR(dai_clk);
+			goto err;
+		}
+		rt5682->dai_clks[i] = dai_clk;
+
+		if (dev->of_node) {
+			devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get,
+						    dai_clk_hw);
+		} else {
+			dai_clk_lookup = clkdev_create(dai_clk, init.name,
+						       "%s", dev_name(dev));
+			if (!dai_clk_lookup) {
+				ret = -ENOMEM;
+				goto err;
+			} else {
+				rt5682->dai_clks_lookup[i] = dai_clk_lookup;
+			}
+		}
+	}
+
+	return 0;
+
+err:
+	do {
+		if (rt5682->dai_clks_lookup[i])
+			clkdev_drop(rt5682->dai_clks_lookup[i]);
+	} while (i-- > 0);
+
+	return ret;
+}
+#endif /* CONFIG_COMMON_CLK */
+
 static int rt5682_probe(struct snd_soc_component *component)
 {
 	struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component);
+	struct sdw_slave *slave;
+	unsigned long time;
 
+#ifdef CONFIG_COMMON_CLK
+	int ret;
+#endif
 	rt5682->component = component;
 
+	if (rt5682->is_sdw) {
+		slave = rt5682->slave;
+		time = wait_for_completion_timeout(
+			&slave->initialization_complete,
+			msecs_to_jiffies(RT5682_PROBE_TIMEOUT));
+		if (!time) {
+			dev_err(&slave->dev, "Initialization not complete, timed out\n");
+			return -ETIMEDOUT;
+		}
+	} else {
+#ifdef CONFIG_COMMON_CLK
+		/* Check if MCLK provided */
+		rt5682->mclk = devm_clk_get(component->dev, "mclk");
+		if (IS_ERR(rt5682->mclk)) {
+			if (PTR_ERR(rt5682->mclk) != -ENOENT) {
+				ret = PTR_ERR(rt5682->mclk);
+				return ret;
+			}
+			rt5682->mclk = NULL;
+		} else {
+			/* Register CCF DAI clock control */
+			ret = rt5682_register_dai_clks(component);
+			if (ret)
+				return ret;
+		}
+		/* Initial setup for CCF */
+		rt5682->lrck[RT5682_AIF1] = CLK_48;
+#endif
+	}
+
 	return 0;
 }
 
@@ -2332,7 +2893,16 @@ static void rt5682_remove(struct snd_soc_component *component)
 {
 	struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component);
 
-	rt5682_reset(rt5682->regmap);
+#ifdef CONFIG_COMMON_CLK
+	int i;
+
+	for (i = RT5682_DAI_NUM_CLKS - 1; i >= 0; --i) {
+		if (rt5682->dai_clks_lookup[i])
+			clkdev_drop(rt5682->dai_clks_lookup[i]);
+	}
+#endif
+
+	rt5682_reset(rt5682);
 }
 
 #ifdef CONFIG_PM
@@ -2369,14 +2939,203 @@ static const struct snd_soc_dai_ops rt5682_aif1_dai_ops = {
 	.hw_params = rt5682_hw_params,
 	.set_fmt = rt5682_set_dai_fmt,
 	.set_tdm_slot = rt5682_set_tdm_slot,
+	.set_bclk_ratio = rt5682_set_bclk1_ratio,
 };
 
 static const struct snd_soc_dai_ops rt5682_aif2_dai_ops = {
 	.hw_params = rt5682_hw_params,
 	.set_fmt = rt5682_set_dai_fmt,
-	.set_bclk_ratio = rt5682_set_bclk_ratio,
+	.set_bclk_ratio = rt5682_set_bclk2_ratio,
 };
 
+#if IS_ENABLED(CONFIG_SND_SOC_RT5682_SDW)
+struct sdw_stream_data {
+	struct sdw_stream_runtime *sdw_stream;
+};
+
+static int rt5682_set_sdw_stream(struct snd_soc_dai *dai, void *sdw_stream,
+				int direction)
+{
+	struct sdw_stream_data *stream;
+
+	stream = kzalloc(sizeof(*stream), GFP_KERNEL);
+	if (!stream)
+		return -ENOMEM;
+
+	stream->sdw_stream = (struct sdw_stream_runtime *)sdw_stream;
+
+	/* Use tx_mask or rx_mask to configure stream tag and set dma_data */
+	if (direction == SNDRV_PCM_STREAM_PLAYBACK)
+		dai->playback_dma_data = stream;
+	else
+		dai->capture_dma_data = stream;
+
+	return 0;
+}
+
+static void rt5682_sdw_shutdown(struct snd_pcm_substream *substream,
+				struct snd_soc_dai *dai)
+{
+	struct sdw_stream_data *stream;
+
+	stream = snd_soc_dai_get_dma_data(dai, substream);
+	snd_soc_dai_set_dma_data(dai, substream, NULL);
+	kfree(stream);
+}
+
+static int rt5682_sdw_hw_params(struct snd_pcm_substream *substream,
+				struct snd_pcm_hw_params *params,
+				struct snd_soc_dai *dai)
+{
+	struct snd_soc_component *component = dai->component;
+	struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component);
+	struct sdw_stream_config stream_config;
+	struct sdw_port_config port_config;
+	enum sdw_data_direction direction;
+	struct sdw_stream_data *stream;
+	int retval, port, num_channels;
+	unsigned int val_p = 0, val_c = 0, osr_p = 0, osr_c = 0;
+
+	dev_dbg(dai->dev, "%s %s", __func__, dai->name);
+	stream = snd_soc_dai_get_dma_data(dai, substream);
+
+	if (!stream)
+		return -ENOMEM;
+
+	if (!rt5682->slave)
+		return -EINVAL;
+
+	/* SoundWire specific configuration */
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		direction = SDW_DATA_DIR_RX;
+		port = 1;
+	} else {
+		direction = SDW_DATA_DIR_TX;
+		port = 2;
+	}
+
+	stream_config.frame_rate = params_rate(params);
+	stream_config.ch_count = params_channels(params);
+	stream_config.bps = snd_pcm_format_width(params_format(params));
+	stream_config.direction = direction;
+
+	num_channels = params_channels(params);
+	port_config.ch_mask = (1 << (num_channels)) - 1;
+	port_config.num = port;
+
+	retval = sdw_stream_add_slave(rt5682->slave, &stream_config,
+				      &port_config, 1, stream->sdw_stream);
+	if (retval) {
+		dev_err(dai->dev, "Unable to configure port\n");
+		return retval;
+	}
+
+	switch (params_rate(params)) {
+	case 48000:
+		val_p = RT5682_SDW_REF_1_48K;
+		val_c = RT5682_SDW_REF_2_48K;
+		break;
+	case 96000:
+		val_p = RT5682_SDW_REF_1_96K;
+		val_c = RT5682_SDW_REF_2_96K;
+		break;
+	case 192000:
+		val_p = RT5682_SDW_REF_1_192K;
+		val_c = RT5682_SDW_REF_2_192K;
+		break;
+	case 32000:
+		val_p = RT5682_SDW_REF_1_32K;
+		val_c = RT5682_SDW_REF_2_32K;
+		break;
+	case 24000:
+		val_p = RT5682_SDW_REF_1_24K;
+		val_c = RT5682_SDW_REF_2_24K;
+		break;
+	case 16000:
+		val_p = RT5682_SDW_REF_1_16K;
+		val_c = RT5682_SDW_REF_2_16K;
+		break;
+	case 12000:
+		val_p = RT5682_SDW_REF_1_12K;
+		val_c = RT5682_SDW_REF_2_12K;
+		break;
+	case 8000:
+		val_p = RT5682_SDW_REF_1_8K;
+		val_c = RT5682_SDW_REF_2_8K;
+		break;
+	case 44100:
+		val_p = RT5682_SDW_REF_1_44K;
+		val_c = RT5682_SDW_REF_2_44K;
+		break;
+	case 88200:
+		val_p = RT5682_SDW_REF_1_88K;
+		val_c = RT5682_SDW_REF_2_88K;
+		break;
+	case 176400:
+		val_p = RT5682_SDW_REF_1_176K;
+		val_c = RT5682_SDW_REF_2_176K;
+		break;
+	case 22050:
+		val_p = RT5682_SDW_REF_1_22K;
+		val_c = RT5682_SDW_REF_2_22K;
+		break;
+	case 11025:
+		val_p = RT5682_SDW_REF_1_11K;
+		val_c = RT5682_SDW_REF_2_11K;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (params_rate(params) <= 48000) {
+		osr_p = RT5682_DAC_OSR_D_8;
+		osr_c = RT5682_ADC_OSR_D_8;
+	} else if (params_rate(params) <= 96000) {
+		osr_p = RT5682_DAC_OSR_D_4;
+		osr_c = RT5682_ADC_OSR_D_4;
+	} else {
+		osr_p = RT5682_DAC_OSR_D_2;
+		osr_c = RT5682_ADC_OSR_D_2;
+	}
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		regmap_update_bits(rt5682->regmap, RT5682_SDW_REF_CLK,
+			RT5682_SDW_REF_1_MASK, val_p);
+		regmap_update_bits(rt5682->regmap, RT5682_ADDA_CLK_1,
+			RT5682_DAC_OSR_MASK, osr_p);
+	} else {
+		regmap_update_bits(rt5682->regmap, RT5682_SDW_REF_CLK,
+			RT5682_SDW_REF_2_MASK, val_c);
+		regmap_update_bits(rt5682->regmap, RT5682_ADDA_CLK_1,
+			RT5682_ADC_OSR_MASK, osr_c);
+	}
+
+	return retval;
+}
+
+static int rt5682_sdw_hw_free(struct snd_pcm_substream *substream,
+				struct snd_soc_dai *dai)
+{
+	struct snd_soc_component *component = dai->component;
+	struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component);
+	struct sdw_stream_data *stream =
+		snd_soc_dai_get_dma_data(dai, substream);
+
+	if (!rt5682->slave)
+		return -EINVAL;
+
+	sdw_stream_remove_slave(rt5682->slave, stream->sdw_stream);
+	return 0;
+}
+
+static struct snd_soc_dai_ops rt5682_sdw_ops = {
+	.hw_params	= rt5682_sdw_hw_params,
+	.hw_free	= rt5682_sdw_hw_free,
+	.set_sdw_stream	= rt5682_set_sdw_stream,
+	.shutdown	= rt5682_sdw_shutdown,
+};
+#endif
+
 static struct snd_soc_dai_driver rt5682_dai[] = {
 	{
 		.name = "rt5682-aif1",
@@ -2409,6 +3168,27 @@ static struct snd_soc_dai_driver rt5682_dai[] = {
 		},
 		.ops = &rt5682_aif2_dai_ops,
 	},
+#if IS_ENABLED(CONFIG_SND_SOC_RT5682_SDW)
+	{
+		.name = "rt5682-sdw",
+		.id = RT5682_SDW,
+		.playback = {
+			.stream_name = "SDW Playback",
+			.channels_min = 1,
+			.channels_max = 2,
+			.rates = RT5682_STEREO_RATES,
+			.formats = RT5682_FORMATS,
+		},
+		.capture = {
+			.stream_name = "SDW Capture",
+			.channels_min = 1,
+			.channels_max = 2,
+			.rates = RT5682_STEREO_RATES,
+			.formats = RT5682_FORMATS,
+		},
+		.ops = &rt5682_sdw_ops,
+	},
+#endif
 };
 
 static const struct snd_soc_component_driver soc_component_dev_rt5682 = {
@@ -2461,10 +3241,21 @@ static int rt5682_parse_dt(struct rt5682_priv *rt5682, struct device *dev)
 		&rt5682->pdata.jd_src);
 	device_property_read_u32(dev, "realtek,btndet-delay",
 		&rt5682->pdata.btndet_delay);
+	device_property_read_u32(dev, "realtek,dmic-clk-rate-hz",
+		&rt5682->pdata.dmic_clk_rate);
+	device_property_read_u32(dev, "realtek,dmic-delay-ms",
+		&rt5682->pdata.dmic_delay);
 
 	rt5682->pdata.ldo1_en = of_get_named_gpio(dev->of_node,
 		"realtek,ldo1-en-gpios", 0);
 
+	if (device_property_read_string_array(dev, "clock-output-names",
+					      rt5682->pdata.dai_clk_names,
+					      RT5682_DAI_NUM_CLKS) < 0)
+		dev_warn(dev, "Using default DAI clk names: %s, %s\n",
+			 rt5682->pdata.dai_clk_names[RT5682_DAI_WCLK_IDX],
+			 rt5682->pdata.dai_clk_names[RT5682_DAI_BCLK_IDX]);
+
 	return 0;
 }
 
@@ -2474,7 +3265,7 @@ static void rt5682_calibrate(struct rt5682_priv *rt5682)
 
 	mutex_lock(&rt5682->calibrate_mutex);
 
-	rt5682_reset(rt5682->regmap);
+	rt5682_reset(rt5682);
 	regmap_write(rt5682->regmap, RT5682_I2C_CTRL, 0x000f);
 	regmap_write(rt5682->regmap, RT5682_PWR_ANLG_1, 0xa2af);
 	usleep_range(15000, 20000);
@@ -2520,6 +3311,221 @@ static void rt5682_calibrate(struct rt5682_priv *rt5682)
 
 }
 
+#if IS_ENABLED(CONFIG_SND_SOC_RT5682_SDW)
+static int rt5682_sdw_read(void *context, unsigned int reg, unsigned int *val)
+{
+	struct device *dev = context;
+	struct rt5682_priv *rt5682 = dev_get_drvdata(dev);
+	unsigned int data_l, data_h;
+
+	regmap_write(rt5682->sdw_regmap, RT5682_SDW_CMD, 0);
+	regmap_write(rt5682->sdw_regmap, RT5682_SDW_ADDR_H, (reg >> 8) & 0xff);
+	regmap_write(rt5682->sdw_regmap, RT5682_SDW_ADDR_L, (reg & 0xff));
+	regmap_read(rt5682->sdw_regmap, RT5682_SDW_DATA_H, &data_h);
+	regmap_read(rt5682->sdw_regmap, RT5682_SDW_DATA_L, &data_l);
+
+	*val = (data_h << 8) | data_l;
+
+	dev_vdbg(dev, "[%s] %04x => %04x\n", __func__, reg, *val);
+
+	return 0;
+}
+
+static int rt5682_sdw_write(void *context, unsigned int reg, unsigned int val)
+{
+	struct device *dev = context;
+	struct rt5682_priv *rt5682 = dev_get_drvdata(dev);
+
+	regmap_write(rt5682->sdw_regmap, RT5682_SDW_CMD, 1);
+	regmap_write(rt5682->sdw_regmap, RT5682_SDW_ADDR_H, (reg >> 8) & 0xff);
+	regmap_write(rt5682->sdw_regmap, RT5682_SDW_ADDR_L, (reg & 0xff));
+	regmap_write(rt5682->sdw_regmap, RT5682_SDW_DATA_H, (val >> 8) & 0xff);
+	regmap_write(rt5682->sdw_regmap, RT5682_SDW_DATA_L, (val & 0xff));
+
+	dev_vdbg(dev, "[%s] %04x <= %04x\n", __func__, reg, val);
+
+	return 0;
+}
+
+static const struct regmap_config rt5682_sdw_regmap = {
+	.reg_bits = 16,
+	.val_bits = 16,
+	.max_register = RT5682_I2C_MODE,
+	.volatile_reg = rt5682_volatile_register,
+	.readable_reg = rt5682_readable_register,
+	.cache_type = REGCACHE_RBTREE,
+	.reg_defaults = rt5682_reg,
+	.num_reg_defaults = ARRAY_SIZE(rt5682_reg),
+	.use_single_read = true,
+	.use_single_write = true,
+	.reg_read = rt5682_sdw_read,
+	.reg_write = rt5682_sdw_write,
+};
+
+int rt5682_sdw_init(struct device *dev, struct regmap *regmap,
+	struct sdw_slave *slave)
+{
+	struct rt5682_priv *rt5682;
+	int ret;
+
+	rt5682 = devm_kzalloc(dev, sizeof(*rt5682), GFP_KERNEL);
+	if (!rt5682)
+		return -ENOMEM;
+
+	dev_set_drvdata(dev, rt5682);
+	rt5682->slave = slave;
+	rt5682->sdw_regmap = regmap;
+	rt5682->is_sdw = true;
+
+	rt5682->regmap = devm_regmap_init(dev, NULL, dev, &rt5682_sdw_regmap);
+	if (IS_ERR(rt5682->regmap)) {
+		ret = PTR_ERR(rt5682->regmap);
+		dev_err(dev, "Failed to allocate register map: %d\n",
+			ret);
+		return ret;
+	}
+
+	/*
+	 * Mark hw_init to false
+	 * HW init will be performed when device reports present
+	 */
+	rt5682->hw_init = false;
+	rt5682->first_hw_init = false;
+
+	mutex_init(&rt5682->calibrate_mutex);
+	INIT_DELAYED_WORK(&rt5682->jack_detect_work,
+		rt5682_jack_detect_handler);
+
+	ret = devm_snd_soc_register_component(dev, &soc_component_dev_rt5682,
+		rt5682_dai, ARRAY_SIZE(rt5682_dai));
+
+	dev_dbg(&slave->dev, "%s\n", __func__);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(rt5682_sdw_init);
+
+int rt5682_io_init(struct device *dev, struct sdw_slave *slave)
+{
+	struct rt5682_priv *rt5682 = dev_get_drvdata(dev);
+	int ret = 0;
+	unsigned int val;
+
+	if (rt5682->hw_init)
+		return 0;
+
+	regmap_read(rt5682->regmap, RT5682_DEVICE_ID, &val);
+	if (val != DEVICE_ID) {
+		pr_err("Device with ID register %x is not rt5682\n", val);
+		return -ENODEV;
+	}
+
+	/*
+	 * PM runtime is only enabled when a Slave reports as Attached
+	 */
+	if (!rt5682->first_hw_init) {
+		/* set autosuspend parameters */
+		pm_runtime_set_autosuspend_delay(&slave->dev, 3000);
+		pm_runtime_use_autosuspend(&slave->dev);
+
+		/* update count of parent 'active' children */
+		pm_runtime_set_active(&slave->dev);
+
+		/* make sure the device does not suspend immediately */
+		pm_runtime_mark_last_busy(&slave->dev);
+
+		pm_runtime_enable(&slave->dev);
+	}
+
+	pm_runtime_get_noresume(&slave->dev);
+
+	rt5682_reset(rt5682);
+
+	if (rt5682->first_hw_init) {
+		regcache_cache_only(rt5682->regmap, false);
+		regcache_cache_bypass(rt5682->regmap, true);
+	}
+
+	rt5682_calibrate(rt5682);
+
+	if (rt5682->first_hw_init) {
+		regcache_cache_bypass(rt5682->regmap, false);
+		regcache_mark_dirty(rt5682->regmap);
+		regcache_sync(rt5682->regmap);
+
+		/* volatile registers */
+		regmap_update_bits(rt5682->regmap, RT5682_CBJ_CTRL_2,
+			RT5682_EXT_JD_SRC, RT5682_EXT_JD_SRC_MANUAL);
+
+		goto reinit;
+	}
+
+	ret = regmap_multi_reg_write(rt5682->regmap, patch_list,
+				    ARRAY_SIZE(patch_list));
+	if (ret != 0)
+		dev_warn(dev, "Failed to apply regmap patch: %d\n", ret);
+
+	regmap_write(rt5682->regmap, RT5682_DEPOP_1, 0x0000);
+
+	regmap_update_bits(rt5682->regmap, RT5682_PWR_ANLG_1,
+			RT5682_LDO1_DVO_MASK | RT5682_HP_DRIVER_MASK,
+			RT5682_LDO1_DVO_12 | RT5682_HP_DRIVER_5X);
+	regmap_write(rt5682->regmap, RT5682_MICBIAS_2, 0x0380);
+	regmap_write(rt5682->regmap, RT5682_TEST_MODE_CTRL_1, 0x0000);
+	regmap_update_bits(rt5682->regmap, RT5682_BIAS_CUR_CTRL_8,
+			RT5682_HPA_CP_BIAS_CTRL_MASK, RT5682_HPA_CP_BIAS_3UA);
+	regmap_update_bits(rt5682->regmap, RT5682_CHARGE_PUMP_1,
+			RT5682_CP_CLK_HP_MASK, RT5682_CP_CLK_HP_300KHZ);
+	regmap_update_bits(rt5682->regmap, RT5682_HP_CHARGE_PUMP_1,
+			RT5682_PM_HP_MASK, RT5682_PM_HP_HV);
+
+	/* Soundwire */
+	regmap_write(rt5682->regmap, RT5682_PLL2_INTERNAL, 0xa266);
+	regmap_write(rt5682->regmap, RT5682_PLL2_CTRL_1, 0x1700);
+	regmap_write(rt5682->regmap, RT5682_PLL2_CTRL_2, 0x0006);
+	regmap_write(rt5682->regmap, RT5682_PLL2_CTRL_3, 0x2600);
+	regmap_write(rt5682->regmap, RT5682_PLL2_CTRL_4, 0x0c8f);
+	regmap_write(rt5682->regmap, RT5682_PLL_TRACK_2, 0x3000);
+	regmap_write(rt5682->regmap, RT5682_PLL_TRACK_3, 0x4000);
+	regmap_update_bits(rt5682->regmap, RT5682_GLB_CLK,
+		RT5682_SCLK_SRC_MASK | RT5682_PLL2_SRC_MASK,
+		RT5682_SCLK_SRC_PLL2 | RT5682_PLL2_SRC_SDW);
+
+	regmap_update_bits(rt5682->regmap, RT5682_CBJ_CTRL_2,
+		RT5682_EXT_JD_SRC, RT5682_EXT_JD_SRC_MANUAL);
+	regmap_write(rt5682->regmap, RT5682_CBJ_CTRL_1, 0xd042);
+	regmap_update_bits(rt5682->regmap, RT5682_CBJ_CTRL_3,
+		RT5682_CBJ_IN_BUF_EN, RT5682_CBJ_IN_BUF_EN);
+	regmap_update_bits(rt5682->regmap, RT5682_SAR_IL_CMD_1,
+		RT5682_SAR_POW_MASK, RT5682_SAR_POW_EN);
+	regmap_update_bits(rt5682->regmap, RT5682_RC_CLK_CTRL,
+			RT5682_POW_IRQ | RT5682_POW_JDH |
+			RT5682_POW_ANA, RT5682_POW_IRQ |
+			RT5682_POW_JDH | RT5682_POW_ANA);
+	regmap_update_bits(rt5682->regmap, RT5682_PWR_ANLG_2,
+		RT5682_PWR_JDH, RT5682_PWR_JDH);
+	regmap_update_bits(rt5682->regmap, RT5682_IRQ_CTRL_2,
+		RT5682_JD1_EN_MASK | RT5682_JD1_IRQ_MASK,
+		RT5682_JD1_EN | RT5682_JD1_IRQ_PUL);
+
+reinit:
+	mod_delayed_work(system_power_efficient_wq,
+		   &rt5682->jack_detect_work, msecs_to_jiffies(250));
+
+	/* Mark Slave initialization complete */
+	rt5682->hw_init = true;
+	rt5682->first_hw_init = true;
+
+	pm_runtime_mark_last_busy(&slave->dev);
+	pm_runtime_put_autosuspend(&slave->dev);
+
+	dev_dbg(&slave->dev, "%s hw_init complete\n", __func__);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(rt5682_io_init);
+#endif
+
 static int rt5682_i2c_probe(struct i2c_client *i2c,
 		    const struct i2c_device_id *id)
 {
@@ -2586,7 +3592,7 @@ static int rt5682_i2c_probe(struct i2c_client *i2c,
 		return -ENODEV;
 	}
 
-	rt5682_reset(rt5682->regmap);
+	rt5682_reset(rt5682);
 
 	mutex_init(&rt5682->calibrate_mutex);
 	rt5682_calibrate(rt5682);
@@ -2651,6 +3657,8 @@ static int rt5682_i2c_probe(struct i2c_client *i2c,
 			RT5682_CP_CLK_HP_MASK, RT5682_CP_CLK_HP_300KHZ);
 	regmap_update_bits(rt5682->regmap, RT5682_HP_CHARGE_PUMP_1,
 			RT5682_PM_HP_MASK, RT5682_PM_HP_HV);
+	regmap_update_bits(rt5682->regmap, RT5682_DMIC_CTRL_1,
+			RT5682_FIFO_CLK_DIV_MASK, RT5682_FIFO_CLK_DIV_2);
 
 	INIT_DELAYED_WORK(&rt5682->jack_detect_work,
 				rt5682_jack_detect_handler);
@@ -2676,7 +3684,7 @@ static void rt5682_i2c_shutdown(struct i2c_client *client)
 {
 	struct rt5682_priv *rt5682 = i2c_get_clientdata(client);
 
-	rt5682_reset(rt5682->regmap);
+	rt5682_reset(rt5682);
 }
 
 #ifdef CONFIG_OF
@@ -2695,7 +3703,7 @@ static const struct acpi_device_id rt5682_acpi_match[] = {
 MODULE_DEVICE_TABLE(acpi, rt5682_acpi_match);
 #endif
 
-static struct i2c_driver rt5682_i2c_driver = {
+static struct i2c_driver __maybe_unused rt5682_i2c_driver = {
 	.driver = {
 		.name = "rt5682",
 		.of_match_table = of_match_ptr(rt5682_of_match),
@@ -2705,7 +3713,10 @@ static struct i2c_driver rt5682_i2c_driver = {
 	.shutdown = rt5682_i2c_shutdown,
 	.id_table = rt5682_i2c_id,
 };
+
+#ifdef CONFIG_I2C
 module_i2c_driver(rt5682_i2c_driver);
+#endif
 
 MODULE_DESCRIPTION("ASoC RT5682 driver");
 MODULE_AUTHOR("Bard Liao <bardliao@realtek.com>");
diff --git a/sound/soc/codecs/rt5682.h b/sound/soc/codecs/rt5682.h
index 18faaa2..0baeece 100644
--- a/sound/soc/codecs/rt5682.h
+++ b/sound/soc/codecs/rt5682.h
@@ -10,6 +10,12 @@
 #define __RT5682_H__
 
 #include <sound/rt5682.h>
+#include <linux/regulator/consumer.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/soundwire/sdw.h>
+#include <linux/soundwire/sdw_type.h>
 
 #define DEVICE_ID 0x6530
 
@@ -177,7 +183,7 @@
 #define RT5682_TEST_MODE_CTRL_4			0x0148
 #define RT5682_TEST_MODE_CTRL_5			0x0149
 #define RT5682_PLL1_INTERNAL			0x0150
-#define RT5682_PLL2_INTERNAL			0x0151
+#define RT5682_PLL2_INTERNAL			0x0156
 #define RT5682_STO_NG2_CTRL_1			0x0160
 #define RT5682_STO_NG2_CTRL_2			0x0161
 #define RT5682_STO_NG2_CTRL_3			0x0162
@@ -651,6 +657,8 @@
 #define RT5682_DMIC_1_EN_SFT			15
 #define RT5682_DMIC_1_DIS			(0x0 << 15)
 #define RT5682_DMIC_1_EN			(0x1 << 15)
+#define RT5682_FIFO_CLK_DIV_MASK		(0x7 << 12)
+#define RT5682_FIFO_CLK_DIV_2			(0x1 << 12)
 #define RT5682_DMIC_1_DP_MASK			(0x3 << 4)
 #define RT5682_DMIC_1_DP_SFT			4
 #define RT5682_DMIC_1_DP_GPIO2			(0x0 << 4)
@@ -738,7 +746,7 @@
 #define RT5682_ADC_OSR_D_24			(0x7 << 12)
 #define RT5682_ADC_OSR_D_32			(0x8 << 12)
 #define RT5682_ADC_OSR_D_48			(0x9 << 12)
-#define RT5682_I2S_M_DIV_MASK			(0xf << 12)
+#define RT5682_I2S_M_DIV_MASK			(0xf << 8)
 #define RT5682_I2S_M_DIV_SFT			8
 #define RT5682_I2S_M_D_1			(0x0 << 8)
 #define RT5682_I2S_M_D_2			(0x1 << 8)
@@ -820,6 +828,12 @@
 #define RT5682_TDM_DF_PCM_B			(0x3 << 11)
 #define RT5682_TDM_DF_PCM_A_N			(0x6 << 11)
 #define RT5682_TDM_DF_PCM_B_N			(0x7 << 11)
+#define RT5682_TDM_BCLK_MS1_MASK		(0x3 << 9)
+#define RT5682_TDM_BCLK_MS1_SFT			9
+#define RT5682_TDM_BCLK_MS1_32			(0x0 << 9)
+#define RT5682_TDM_BCLK_MS1_64			(0x1 << 9)
+#define RT5682_TDM_BCLK_MS1_128			(0x2 << 9)
+#define RT5682_TDM_BCLK_MS1_256			(0x3 << 9)
 #define RT5682_TDM_CL_MASK			(0x3 << 4)
 #define RT5682_TDM_CL_16			(0x0 << 4)
 #define RT5682_TDM_CL_20			(0x1 << 4)
@@ -835,8 +849,8 @@
 #define RT5682_TDM_M_LP_INV			(0x1 << 1)
 #define RT5682_TDM_MS_MASK			(0x1 << 0)
 #define RT5682_TDM_MS_SFT			0
-#define RT5682_TDM_MS_M				(0x0 << 0)
-#define RT5682_TDM_MS_S				(0x1 << 0)
+#define RT5682_TDM_MS_S				(0x0 << 0)
+#define RT5682_TDM_MS_M				(0x1 << 0)
 
 /* Global Clock Control (0x0080) */
 #define RT5682_SCLK_SRC_MASK			(0x7 << 13)
@@ -1049,6 +1063,28 @@
 #define RT5682_PWR_CLK1M_PD			(0x0 << 8)
 #define RT5682_PWR_CLK1M_PU			(0x1 << 8)
 
+/* PLL2 M/N/K Code Control 1 (0x009b) */
+#define RT5682_PLL2F_K_MASK			(0x1f << 8)
+#define RT5682_PLL2F_K_SFT			8
+#define RT5682_PLL2B_K_MASK			(0xf << 4)
+#define RT5682_PLL2B_K_SFT			4
+#define RT5682_PLL2B_M_MASK			(0xf << 0)
+
+/* PLL2 M/N/K Code Control 2 (0x009c) */
+#define RT5682_PLL2F_M_MASK			(0x3f << 8)
+#define RT5682_PLL2F_M_SFT			8
+#define RT5682_PLL2B_N_MASK			(0x3f << 0)
+
+/* PLL2 M/N/K Code Control 2 (0x009d) */
+#define RT5682_PLL2F_N_MASK			(0x7f << 8)
+#define RT5682_PLL2F_N_SFT			8
+
+/* PLL2 M/N/K Code Control 2 (0x009e) */
+#define RT5682_PLL2B_M_BP_MASK			(0x1 << 11)
+#define RT5682_PLL2B_M_BP_SFT			11
+#define RT5682_PLL2F_M_BP_MASK			(0x1 << 7)
+#define RT5682_PLL2F_M_BP_SFT			7
+
 /* RC Clock Control (0x009f) */
 #define RT5682_POW_IRQ				(0x1 << 15)
 #define RT5682_POW_JDH				(0x1 << 14)
@@ -1091,11 +1127,17 @@
 #define RT5682_JD1_POL_MASK			(0x1 << 13)
 #define RT5682_JD1_POL_NOR			(0x0 << 13)
 #define RT5682_JD1_POL_INV			(0x1 << 13)
+#define RT5682_JD1_IRQ_MASK			(0x1 << 10)
+#define RT5682_JD1_IRQ_LEV			(0x0 << 10)
+#define RT5682_JD1_IRQ_PUL			(0x1 << 10)
 
 /* IRQ Control 3 (0x00b8) */
 #define RT5682_IL_IRQ_MASK			(0x1 << 7)
 #define RT5682_IL_IRQ_DIS			(0x0 << 7)
 #define RT5682_IL_IRQ_EN			(0x1 << 7)
+#define RT5682_IL_IRQ_TYPE_MASK			(0x1 << 4)
+#define RT5682_IL_IRQ_LEV			(0x0 << 4)
+#define RT5682_IL_IRQ_PUL			(0x1 << 4)
 
 /* GPIO Control 1 (0x00c0) */
 #define RT5682_GP1_PIN_MASK			(0x3 << 14)
@@ -1309,11 +1351,19 @@ enum {
 	RT5682_PLL1_S_MCLK,
 	RT5682_PLL1_S_BCLK1,
 	RT5682_PLL1_S_RCCLK,
+	RT5682_PLL2_S_MCLK,
+};
+
+enum {
+	RT5682_PLL1,
+	RT5682_PLL2,
+	RT5682_PLLS,
 };
 
 enum {
 	RT5682_AIF1,
 	RT5682_AIF2,
+	RT5682_SDW,
 	RT5682_AIFS
 };
 
@@ -1329,7 +1379,49 @@ enum {
 	RT5682_CLK_SEL_I2S2_ASRC,
 };
 
+#define RT5682_NUM_SUPPLIES 3
+
+struct rt5682_priv {
+	struct snd_soc_component *component;
+	struct rt5682_platform_data pdata;
+	struct regmap *regmap;
+	struct regmap *sdw_regmap;
+	struct snd_soc_jack *hs_jack;
+	struct regulator_bulk_data supplies[RT5682_NUM_SUPPLIES];
+	struct delayed_work jack_detect_work;
+	struct delayed_work jd_check_work;
+	struct mutex calibrate_mutex;
+	struct sdw_slave *slave;
+	enum sdw_slave_status status;
+	struct sdw_bus_params params;
+	bool hw_init;
+	bool first_hw_init;
+	bool is_sdw;
+
+#ifdef CONFIG_COMMON_CLK
+	struct clk_hw dai_clks_hw[RT5682_DAI_NUM_CLKS];
+	struct clk_lookup *dai_clks_lookup[RT5682_DAI_NUM_CLKS];
+	struct clk *dai_clks[RT5682_DAI_NUM_CLKS];
+	struct clk *mclk;
+#endif
+
+	int sysclk;
+	int sysclk_src;
+	int lrck[RT5682_AIFS];
+	int bclk[RT5682_AIFS];
+	int master[RT5682_AIFS];
+
+	int pll_src[RT5682_PLLS];
+	int pll_in[RT5682_PLLS];
+	int pll_out[RT5682_PLLS];
+
+	int jack_type;
+};
+
 int rt5682_sel_asrc_clk_src(struct snd_soc_component *component,
 		unsigned int filter_mask, unsigned int clk_src);
+int rt5682_sdw_init(struct device *dev, struct regmap *regmap,
+	       struct sdw_slave *slave);
+int rt5682_io_init(struct device *dev, struct sdw_slave *slave);
 
 #endif /* __RT5682_H__ */
diff --git a/sound/soc/codecs/tas2562.c b/sound/soc/codecs/tas2562.c
index be52886..7fae886 100644
--- a/sound/soc/codecs/tas2562.c
+++ b/sound/soc/codecs/tas2562.c
@@ -26,6 +26,24 @@
 #define TAS2562_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE |\
 			 SNDRV_PCM_FORMAT_S32_LE)
 
+/* DVC equation involves floating point math
+ * round(10^(volume in dB/20)*2^30)
+ * so create a lookup table for 2dB step
+ */
+static const unsigned int float_vol_db_lookup[] = {
+0x00000d43, 0x000010b2, 0x00001505, 0x00001a67, 0x00002151,
+0x000029f1, 0x000034cd, 0x00004279, 0x000053af, 0x0000695b,
+0x0000695b, 0x0000a6fa, 0x0000d236, 0x000108a4, 0x00014d2a,
+0x0001a36e, 0x00021008, 0x000298c0, 0x000344df, 0x00041d8f,
+0x00052e5a, 0x000685c8, 0x00083621, 0x000a566d, 0x000d03a7,
+0x0010624d, 0x0014a050, 0x0019f786, 0x0020b0bc, 0x0029279d,
+0x0033cf8d, 0x004139d3, 0x00521d50, 0x00676044, 0x0082248a,
+0x00a3d70a, 0x00ce4328, 0x0103ab3d, 0x0146e75d, 0x019b8c27,
+0x02061b89, 0x028c423f, 0x03352529, 0x0409c2b0, 0x05156d68,
+0x080e9f96, 0x0a24b062, 0x0cc509ab, 0x10137987, 0x143d1362,
+0x197a967f, 0x2013739e, 0x28619ae9, 0x32d64617, 0x40000000
+};
+
 struct tas2562_data {
 	struct snd_soc_component *component;
 	struct gpio_desc *sdz_gpio;
@@ -34,6 +52,12 @@ struct tas2562_data {
 	struct i2c_client *client;
 	int v_sense_slot;
 	int i_sense_slot;
+	int volume_lvl;
+};
+
+enum tas256x_model {
+	TAS2562,
+	TAS2563,
 };
 
 static int tas2562_set_bias_level(struct snd_soc_component *component,
@@ -383,21 +407,81 @@ static int tas2562_dac_event(struct snd_soc_dapm_widget *w,
 	struct snd_soc_component *component =
 					snd_soc_dapm_to_component(w->dapm);
 	struct tas2562_data *tas2562 = snd_soc_component_get_drvdata(component);
+	int ret;
 
 	switch (event) {
 	case SND_SOC_DAPM_POST_PMU:
-		dev_info(tas2562->dev, "SND_SOC_DAPM_POST_PMU\n");
+		ret = snd_soc_component_update_bits(component,
+			TAS2562_PWR_CTRL,
+			TAS2562_MODE_MASK,
+			TAS2562_MUTE);
+		if (ret)
+			goto end;
 		break;
 	case SND_SOC_DAPM_PRE_PMD:
-		dev_info(tas2562->dev, "SND_SOC_DAPM_PRE_PMD\n");
+		ret = snd_soc_component_update_bits(component,
+			TAS2562_PWR_CTRL,
+			TAS2562_MODE_MASK,
+			TAS2562_SHUTDOWN);
+		if (ret)
+			goto end;
 		break;
 	default:
-		break;
+		dev_err(tas2562->dev, "Not supported evevt\n");
+		return -EINVAL;
 	}
 
+end:
+	if (ret < 0)
+		return ret;
+
 	return 0;
 }
 
+static int tas2562_volume_control_get(struct snd_kcontrol *kcontrol,
+				      struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
+	struct tas2562_data *tas2562 = snd_soc_component_get_drvdata(component);
+
+	ucontrol->value.integer.value[0] = tas2562->volume_lvl;
+	return 0;
+}
+
+static int tas2562_volume_control_put(struct snd_kcontrol *kcontrol,
+				      struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
+	struct tas2562_data *tas2562 = snd_soc_component_get_drvdata(component);
+	int ret;
+	u32 reg_val;
+
+	reg_val = float_vol_db_lookup[ucontrol->value.integer.value[0]/2];
+	ret = snd_soc_component_write(component, TAS2562_DVC_CFG4,
+				      (reg_val & 0xff));
+	if (ret)
+		return ret;
+	ret = snd_soc_component_write(component, TAS2562_DVC_CFG3,
+				      ((reg_val >> 8) & 0xff));
+	if (ret)
+		return ret;
+	ret = snd_soc_component_write(component, TAS2562_DVC_CFG2,
+				      ((reg_val >> 16) & 0xff));
+	if (ret)
+		return ret;
+	ret = snd_soc_component_write(component, TAS2562_DVC_CFG1,
+				      ((reg_val >> 24) & 0xff));
+	if (ret)
+		return ret;
+
+	tas2562->volume_lvl = ucontrol->value.integer.value[0];
+
+	return ret;
+}
+
+/* Digital Volume Control. From 0 dB to -110 dB in 1 dB steps */
+static const DECLARE_TLV_DB_SCALE(dvc_tlv, -11000, 100, 0);
+
 static DECLARE_TLV_DB_SCALE(tas2562_dac_tlv, 850, 50, 0);
 
 static const struct snd_kcontrol_new isense_switch =
@@ -409,14 +493,24 @@ static const struct snd_kcontrol_new vsense_switch =
 			1, 1);
 
 static const struct snd_kcontrol_new tas2562_snd_controls[] = {
-	SOC_SINGLE_TLV("Amp Gain Volume", TAS2562_PB_CFG1, 0, 0x1c, 0,
+	SOC_SINGLE_TLV("Amp Gain Volume", TAS2562_PB_CFG1, 1, 0x1c, 0,
 		       tas2562_dac_tlv),
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Digital Volume Control",
+		.index = 0,
+		.tlv.p = dvc_tlv,
+		.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | SNDRV_CTL_ELEM_ACCESS_READWRITE,
+		.info = snd_soc_info_volsw,
+		.get = tas2562_volume_control_get,
+		.put = tas2562_volume_control_put,
+		.private_value = SOC_SINGLE_VALUE(TAS2562_DVC_CFG1, 0, 110, 0, 0) ,
+	},
 };
 
 static const struct snd_soc_dapm_widget tas2562_dapm_widgets[] = {
 	SND_SOC_DAPM_AIF_IN("ASI1", "ASI1 Playback", 0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_MUX("ASI1 Sel", SND_SOC_NOPM, 0, 0, &tas2562_asi1_mux),
-	SND_SOC_DAPM_AIF_IN("DAC IN", "Playback", 0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_DAC_E("DAC", NULL, SND_SOC_NOPM, 0, 0, tas2562_dac_event,
 			   SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
 	SND_SOC_DAPM_SWITCH("ISENSE", TAS2562_PWR_CTRL, 3, 1, &isense_switch),
@@ -431,7 +525,7 @@ static const struct snd_soc_dapm_route tas2562_audio_map[] = {
 	{"ASI1 Sel", "Left", "ASI1"},
 	{"ASI1 Sel", "Right", "ASI1"},
 	{"ASI1 Sel", "LeftRightDiv2", "ASI1"},
-	{ "DAC", NULL, "DAC IN" },
+	{ "DAC", NULL, "ASI1 Sel" },
 	{ "OUT", NULL, "DAC" },
 	{"ISENSE", "Switch", "IMON"},
 	{"VSENSE", "Switch", "VMON"},
@@ -472,6 +566,13 @@ static struct snd_soc_dai_driver tas2562_dai[] = {
 			.rates      = SNDRV_PCM_RATE_8000_192000,
 			.formats    = TAS2562_FORMATS,
 		},
+		.capture = {
+			.stream_name    = "ASI1 Capture",
+			.channels_min   = 0,
+			.channels_max   = 2,
+			.rates		= SNDRV_PCM_RATE_8000_192000,
+			.formats	= TAS2562_FORMATS,
+		},
 		.ops = &tas2562_speaker_dai_ops,
 	},
 };
@@ -495,6 +596,10 @@ static const struct reg_default tas2562_reg_defaults[] = {
 	{ TAS2562_PB_CFG1, 0x20 },
 	{ TAS2562_TDM_CFG0, 0x09 },
 	{ TAS2562_TDM_CFG1, 0x02 },
+	{ TAS2562_DVC_CFG1, 0x40 },
+	{ TAS2562_DVC_CFG2, 0x40 },
+	{ TAS2562_DVC_CFG3, 0x00 },
+	{ TAS2562_DVC_CFG4, 0x00 },
 };
 
 static const struct regmap_config tas2562_regmap_config = {
@@ -564,13 +669,15 @@ static int tas2562_probe(struct i2c_client *client,
 }
 
 static const struct i2c_device_id tas2562_id[] = {
-	{ "tas2562", 0 },
+	{ "tas2562", TAS2562 },
+	{ "tas2563", TAS2563 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, tas2562_id);
 
 static const struct of_device_id tas2562_of_match[] = {
 	{ .compatible = "ti,tas2562", },
+	{ .compatible = "ti,tas2563", },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, tas2562_of_match);
diff --git a/sound/soc/codecs/tas2562.h b/sound/soc/codecs/tas2562.h
index 62e659a..28e75fc 100644
--- a/sound/soc/codecs/tas2562.h
+++ b/sound/soc/codecs/tas2562.h
@@ -35,12 +35,14 @@
 #define TAS2562_REV_ID		TAS2562_REG(0, 0x7d)
 
 /* Page 2 */
-#define TAS2562_DVC_CFG1	TAS2562_REG(2, 0x01)
-#define TAS2562_DVC_CFG2	TAS2562_REG(2, 0x02)
+#define TAS2562_DVC_CFG1	TAS2562_REG(2, 0x0c)
+#define TAS2562_DVC_CFG2	TAS2562_REG(2, 0x0d)
+#define TAS2562_DVC_CFG3	TAS2562_REG(2, 0x0e)
+#define TAS2562_DVC_CFG4	TAS2562_REG(2, 0x0f)
 
 #define TAS2562_RESET	BIT(0)
 
-#define TAS2562_MODE_MASK	0x3
+#define TAS2562_MODE_MASK	GENMASK(1,0)
 #define TAS2562_ACTIVE		0x0
 #define TAS2562_MUTE		0x1
 #define TAS2562_SHUTDOWN	0x2
@@ -73,8 +75,8 @@
 #define TAS2562_TDM_CFG2_RXWLEN_24B	BIT(3)
 #define TAS2562_TDM_CFG2_RXWLEN_32B	(BIT(2) | BIT(3))
 
-#define TAS2562_VSENSE_POWER_EN		BIT(2)
-#define TAS2562_ISENSE_POWER_EN		BIT(3)
+#define TAS2562_VSENSE_POWER_EN		2
+#define TAS2562_ISENSE_POWER_EN		3
 
 #define TAS2562_TDM_CFG5_VSNS_EN	BIT(6)
 #define TAS2562_TDM_CFG5_VSNS_SLOT_MASK	GENMASK(5, 0)
diff --git a/sound/soc/codecs/tlv320adcx140.c b/sound/soc/codecs/tlv320adcx140.c
new file mode 100644
index 0000000..3889756
--- /dev/null
+++ b/sound/soc/codecs/tlv320adcx140.c
@@ -0,0 +1,920 @@
+// SPDX-License-Identifier: GPL-2.0
+// TLV320ADCX140 Sound driver
+// Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/gpio/consumer.h>
+#include <linux/regulator/consumer.h>
+#include <linux/acpi.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/slab.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+
+#include "tlv320adcx140.h"
+
+struct adcx140_priv {
+	struct snd_soc_component *component;
+	struct regulator *supply_areg;
+	struct gpio_desc *gpio_reset;
+	struct regmap *regmap;
+	struct device *dev;
+
+	int micbias_vg;
+
+	unsigned int dai_fmt;
+	unsigned int tdm_delay;
+	unsigned int slot_width;
+};
+
+static const struct reg_default adcx140_reg_defaults[] = {
+	{ ADCX140_PAGE_SELECT, 0x00 },
+	{ ADCX140_SW_RESET, 0x00 },
+	{ ADCX140_SLEEP_CFG, 0x00 },
+	{ ADCX140_SHDN_CFG, 0x05 },
+	{ ADCX140_ASI_CFG0, 0x30 },
+	{ ADCX140_ASI_CFG1, 0x00 },
+	{ ADCX140_ASI_CFG2, 0x00 },
+	{ ADCX140_ASI_CH1, 0x00 },
+	{ ADCX140_ASI_CH2, 0x01 },
+	{ ADCX140_ASI_CH3, 0x02 },
+	{ ADCX140_ASI_CH4, 0x03 },
+	{ ADCX140_ASI_CH5, 0x04 },
+	{ ADCX140_ASI_CH6, 0x05 },
+	{ ADCX140_ASI_CH7, 0x06 },
+	{ ADCX140_ASI_CH8, 0x07 },
+	{ ADCX140_MST_CFG0, 0x02 },
+	{ ADCX140_MST_CFG1, 0x48 },
+	{ ADCX140_ASI_STS, 0xff },
+	{ ADCX140_CLK_SRC, 0x10 },
+	{ ADCX140_PDMCLK_CFG, 0x40 },
+	{ ADCX140_PDM_CFG, 0x00 },
+	{ ADCX140_GPIO_CFG0, 0x22 },
+	{ ADCX140_GPO_CFG1, 0x00 },
+	{ ADCX140_GPO_CFG2, 0x00 },
+	{ ADCX140_GPO_CFG3, 0x00 },
+	{ ADCX140_GPO_CFG4, 0x00 },
+	{ ADCX140_GPO_VAL, 0x00 },
+	{ ADCX140_GPIO_MON, 0x00 },
+	{ ADCX140_GPI_CFG0, 0x00 },
+	{ ADCX140_GPI_CFG1, 0x00 },
+	{ ADCX140_GPI_MON, 0x00 },
+	{ ADCX140_INT_CFG, 0x00 },
+	{ ADCX140_INT_MASK0, 0xff },
+	{ ADCX140_INT_LTCH0, 0x00 },
+	{ ADCX140_BIAS_CFG, 0x00 },
+	{ ADCX140_CH1_CFG0, 0x00 },
+	{ ADCX140_CH1_CFG1, 0x00 },
+	{ ADCX140_CH1_CFG2, 0xc9 },
+	{ ADCX140_CH1_CFG3, 0x80 },
+	{ ADCX140_CH1_CFG4, 0x00 },
+	{ ADCX140_CH2_CFG0, 0x00 },
+	{ ADCX140_CH2_CFG1, 0x00 },
+	{ ADCX140_CH2_CFG2, 0xc9 },
+	{ ADCX140_CH2_CFG3, 0x80 },
+	{ ADCX140_CH2_CFG4, 0x00 },
+	{ ADCX140_CH3_CFG0, 0x00 },
+	{ ADCX140_CH3_CFG1, 0x00 },
+	{ ADCX140_CH3_CFG2, 0xc9 },
+	{ ADCX140_CH3_CFG3, 0x80 },
+	{ ADCX140_CH3_CFG4, 0x00 },
+	{ ADCX140_CH4_CFG0, 0x00 },
+	{ ADCX140_CH4_CFG1, 0x00 },
+	{ ADCX140_CH4_CFG2, 0xc9 },
+	{ ADCX140_CH4_CFG3, 0x80 },
+	{ ADCX140_CH4_CFG4, 0x00 },
+	{ ADCX140_CH5_CFG2, 0xc9 },
+	{ ADCX140_CH5_CFG3, 0x80 },
+	{ ADCX140_CH5_CFG4, 0x00 },
+	{ ADCX140_CH6_CFG2, 0xc9 },
+	{ ADCX140_CH6_CFG3, 0x80 },
+	{ ADCX140_CH6_CFG4, 0x00 },
+	{ ADCX140_CH7_CFG2, 0xc9 },
+	{ ADCX140_CH7_CFG3, 0x80 },
+	{ ADCX140_CH7_CFG4, 0x00 },
+	{ ADCX140_CH8_CFG2, 0xc9 },
+	{ ADCX140_CH8_CFG3, 0x80 },
+	{ ADCX140_CH8_CFG4, 0x00 },
+	{ ADCX140_DSP_CFG0, 0x01 },
+	{ ADCX140_DSP_CFG1, 0x40 },
+	{ ADCX140_DRE_CFG0, 0x7b },
+	{ ADCX140_AGC_CFG0, 0xe7 },
+	{ ADCX140_IN_CH_EN, 0xf0 },
+	{ ADCX140_ASI_OUT_CH_EN, 0x00 },
+	{ ADCX140_PWR_CFG, 0x00 },
+	{ ADCX140_DEV_STS0, 0x00 },
+	{ ADCX140_DEV_STS1, 0x80 },
+};
+
+static const struct regmap_range_cfg adcx140_ranges[] = {
+	{
+		.range_min = 0,
+		.range_max = 12 * 128,
+		.selector_reg = ADCX140_PAGE_SELECT,
+		.selector_mask = 0xff,
+		.selector_shift = 0,
+		.window_start = 0,
+		.window_len = 128,
+	},
+};
+
+static bool adcx140_volatile(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case ADCX140_SW_RESET:
+	case ADCX140_DEV_STS0:
+	case ADCX140_DEV_STS1:
+	case ADCX140_ASI_STS:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_config adcx140_i2c_regmap = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.reg_defaults = adcx140_reg_defaults,
+	.num_reg_defaults = ARRAY_SIZE(adcx140_reg_defaults),
+	.cache_type = REGCACHE_FLAT,
+	.ranges = adcx140_ranges,
+	.num_ranges = ARRAY_SIZE(adcx140_ranges),
+	.max_register = 12 * 128,
+	.volatile_reg = adcx140_volatile,
+};
+
+/* Digital Volume control. From -100 to 27 dB in 0.5 dB steps */
+static DECLARE_TLV_DB_SCALE(dig_vol_tlv, -10000, 50, 0);
+
+/* ADC gain. From 0 to 42 dB in 1 dB steps */
+static DECLARE_TLV_DB_SCALE(adc_tlv, 0, 100, 0);
+
+/* DRE Level. From -12 dB to -66 dB in 1 dB steps */
+static DECLARE_TLV_DB_SCALE(dre_thresh_tlv, -6600, 100, 0);
+/* DRE Max Gain. From 2 dB to 26 dB in 2 dB steps */
+static DECLARE_TLV_DB_SCALE(dre_gain_tlv, 200, 200, 0);
+
+/* AGC Level. From -6 dB to -36 dB in 2 dB steps */
+static DECLARE_TLV_DB_SCALE(agc_thresh_tlv, -3600, 200, 0);
+/* AGC Max Gain. From 3 dB to 42 dB in 3 dB steps */
+static DECLARE_TLV_DB_SCALE(agc_gain_tlv, 300, 300, 0);
+
+static const char * const decimation_filter_text[] = {
+	"Linear Phase", "Low Latency", "Ultra-low Latency"
+};
+
+static SOC_ENUM_SINGLE_DECL(decimation_filter_enum, ADCX140_DSP_CFG0, 4,
+			    decimation_filter_text);
+
+static const struct snd_kcontrol_new decimation_filter_controls[] = {
+	SOC_DAPM_ENUM("Decimation Filter", decimation_filter_enum),
+};
+
+static const char * const resistor_text[] = {
+	"2.5 kOhm", "10 kOhm", "20 kOhm"
+};
+
+static SOC_ENUM_SINGLE_DECL(in1_resistor_enum, ADCX140_CH1_CFG0, 2,
+			    resistor_text);
+static SOC_ENUM_SINGLE_DECL(in2_resistor_enum, ADCX140_CH2_CFG0, 2,
+			    resistor_text);
+static SOC_ENUM_SINGLE_DECL(in3_resistor_enum, ADCX140_CH3_CFG0, 2,
+			    resistor_text);
+static SOC_ENUM_SINGLE_DECL(in4_resistor_enum, ADCX140_CH4_CFG0, 2,
+			    resistor_text);
+
+static const struct snd_kcontrol_new in1_resistor_controls[] = {
+	SOC_DAPM_ENUM("CH1 Resistor Select", in1_resistor_enum),
+};
+static const struct snd_kcontrol_new in2_resistor_controls[] = {
+	SOC_DAPM_ENUM("CH2 Resistor Select", in2_resistor_enum),
+};
+static const struct snd_kcontrol_new in3_resistor_controls[] = {
+	SOC_DAPM_ENUM("CH3 Resistor Select", in3_resistor_enum),
+};
+static const struct snd_kcontrol_new in4_resistor_controls[] = {
+	SOC_DAPM_ENUM("CH4 Resistor Select", in4_resistor_enum),
+};
+
+/* Analog/Digital Selection */
+static const char *adcx140_mic_sel_text[] = {"Analog", "Line In", "Digital"};
+static const char *adcx140_analog_sel_text[] = {"Analog", "Line In"};
+
+static SOC_ENUM_SINGLE_DECL(adcx140_mic1p_enum,
+			    ADCX140_CH1_CFG0, 5,
+			    adcx140_mic_sel_text);
+
+static const struct snd_kcontrol_new adcx140_dapm_mic1p_control =
+SOC_DAPM_ENUM("MIC1P MUX", adcx140_mic1p_enum);
+
+static SOC_ENUM_SINGLE_DECL(adcx140_mic1_analog_enum,
+			    ADCX140_CH1_CFG0, 7,
+			    adcx140_analog_sel_text);
+
+static const struct snd_kcontrol_new adcx140_dapm_mic1_analog_control =
+SOC_DAPM_ENUM("MIC1 Analog MUX", adcx140_mic1_analog_enum);
+
+static SOC_ENUM_SINGLE_DECL(adcx140_mic1m_enum,
+			    ADCX140_CH1_CFG0, 5,
+			    adcx140_mic_sel_text);
+
+static const struct snd_kcontrol_new adcx140_dapm_mic1m_control =
+SOC_DAPM_ENUM("MIC1M MUX", adcx140_mic1m_enum);
+
+static SOC_ENUM_SINGLE_DECL(adcx140_mic2p_enum,
+			    ADCX140_CH2_CFG0, 5,
+			    adcx140_mic_sel_text);
+
+static const struct snd_kcontrol_new adcx140_dapm_mic2p_control =
+SOC_DAPM_ENUM("MIC2P MUX", adcx140_mic2p_enum);
+
+static SOC_ENUM_SINGLE_DECL(adcx140_mic2_analog_enum,
+			    ADCX140_CH2_CFG0, 7,
+			    adcx140_analog_sel_text);
+
+static const struct snd_kcontrol_new adcx140_dapm_mic2_analog_control =
+SOC_DAPM_ENUM("MIC2 Analog MUX", adcx140_mic2_analog_enum);
+
+static SOC_ENUM_SINGLE_DECL(adcx140_mic2m_enum,
+			    ADCX140_CH2_CFG0, 5,
+			    adcx140_mic_sel_text);
+
+static const struct snd_kcontrol_new adcx140_dapm_mic2m_control =
+SOC_DAPM_ENUM("MIC2M MUX", adcx140_mic2m_enum);
+
+static SOC_ENUM_SINGLE_DECL(adcx140_mic3p_enum,
+			    ADCX140_CH3_CFG0, 5,
+			    adcx140_mic_sel_text);
+
+static const struct snd_kcontrol_new adcx140_dapm_mic3p_control =
+SOC_DAPM_ENUM("MIC3P MUX", adcx140_mic3p_enum);
+
+static SOC_ENUM_SINGLE_DECL(adcx140_mic3_analog_enum,
+			    ADCX140_CH3_CFG0, 7,
+			    adcx140_analog_sel_text);
+
+static const struct snd_kcontrol_new adcx140_dapm_mic3_analog_control =
+SOC_DAPM_ENUM("MIC3 Analog MUX", adcx140_mic3_analog_enum);
+
+static SOC_ENUM_SINGLE_DECL(adcx140_mic3m_enum,
+			    ADCX140_CH3_CFG0, 5,
+			    adcx140_mic_sel_text);
+
+static const struct snd_kcontrol_new adcx140_dapm_mic3m_control =
+SOC_DAPM_ENUM("MIC3M MUX", adcx140_mic3m_enum);
+
+static SOC_ENUM_SINGLE_DECL(adcx140_mic4p_enum,
+			    ADCX140_CH4_CFG0, 5,
+			    adcx140_mic_sel_text);
+
+static const struct snd_kcontrol_new adcx140_dapm_mic4p_control =
+SOC_DAPM_ENUM("MIC4P MUX", adcx140_mic4p_enum);
+
+static SOC_ENUM_SINGLE_DECL(adcx140_mic4_analog_enum,
+			    ADCX140_CH4_CFG0, 7,
+			    adcx140_analog_sel_text);
+
+static const struct snd_kcontrol_new adcx140_dapm_mic4_analog_control =
+SOC_DAPM_ENUM("MIC4 Analog MUX", adcx140_mic4_analog_enum);
+
+static SOC_ENUM_SINGLE_DECL(adcx140_mic4m_enum,
+			    ADCX140_CH4_CFG0, 5,
+			    adcx140_mic_sel_text);
+
+static const struct snd_kcontrol_new adcx140_dapm_mic4m_control =
+SOC_DAPM_ENUM("MIC4M MUX", adcx140_mic4m_enum);
+
+static const struct snd_kcontrol_new adcx140_dapm_ch1_en_switch =
+	SOC_DAPM_SINGLE("Switch", ADCX140_ASI_OUT_CH_EN, 7, 1, 0);
+static const struct snd_kcontrol_new adcx140_dapm_ch2_en_switch =
+	SOC_DAPM_SINGLE("Switch", ADCX140_ASI_OUT_CH_EN, 6, 1, 0);
+static const struct snd_kcontrol_new adcx140_dapm_ch3_en_switch =
+	SOC_DAPM_SINGLE("Switch", ADCX140_ASI_OUT_CH_EN, 5, 1, 0);
+static const struct snd_kcontrol_new adcx140_dapm_ch4_en_switch =
+	SOC_DAPM_SINGLE("Switch", ADCX140_ASI_OUT_CH_EN, 4, 1, 0);
+
+static const struct snd_kcontrol_new adcx140_dapm_ch1_dre_en_switch =
+	SOC_DAPM_SINGLE("Switch", ADCX140_CH1_CFG0, 0, 1, 0);
+static const struct snd_kcontrol_new adcx140_dapm_ch2_dre_en_switch =
+	SOC_DAPM_SINGLE("Switch", ADCX140_CH2_CFG0, 0, 1, 0);
+static const struct snd_kcontrol_new adcx140_dapm_ch3_dre_en_switch =
+	SOC_DAPM_SINGLE("Switch", ADCX140_CH3_CFG0, 0, 1, 0);
+static const struct snd_kcontrol_new adcx140_dapm_ch4_dre_en_switch =
+	SOC_DAPM_SINGLE("Switch", ADCX140_CH4_CFG0, 0, 1, 0);
+
+static const struct snd_kcontrol_new adcx140_dapm_dre_en_switch =
+	SOC_DAPM_SINGLE("Switch", ADCX140_DSP_CFG1, 3, 1, 0);
+
+/* Output Mixer */
+static const struct snd_kcontrol_new adcx140_output_mixer_controls[] = {
+	SOC_DAPM_SINGLE("Digital CH1 Switch", 0, 0, 0, 0),
+	SOC_DAPM_SINGLE("Digital CH2 Switch", 0, 0, 0, 0),
+	SOC_DAPM_SINGLE("Digital CH3 Switch", 0, 0, 0, 0),
+	SOC_DAPM_SINGLE("Digital CH4 Switch", 0, 0, 0, 0),
+};
+
+static const struct snd_soc_dapm_widget adcx140_dapm_widgets[] = {
+	/* Analog Differential Inputs */
+	SND_SOC_DAPM_INPUT("MIC1P"),
+	SND_SOC_DAPM_INPUT("MIC1M"),
+	SND_SOC_DAPM_INPUT("MIC2P"),
+	SND_SOC_DAPM_INPUT("MIC2M"),
+	SND_SOC_DAPM_INPUT("MIC3P"),
+	SND_SOC_DAPM_INPUT("MIC3M"),
+	SND_SOC_DAPM_INPUT("MIC4P"),
+	SND_SOC_DAPM_INPUT("MIC4M"),
+
+	SND_SOC_DAPM_OUTPUT("CH1_OUT"),
+	SND_SOC_DAPM_OUTPUT("CH2_OUT"),
+	SND_SOC_DAPM_OUTPUT("CH3_OUT"),
+	SND_SOC_DAPM_OUTPUT("CH4_OUT"),
+	SND_SOC_DAPM_OUTPUT("CH5_OUT"),
+	SND_SOC_DAPM_OUTPUT("CH6_OUT"),
+	SND_SOC_DAPM_OUTPUT("CH7_OUT"),
+	SND_SOC_DAPM_OUTPUT("CH8_OUT"),
+
+	SND_SOC_DAPM_MIXER("Output Mixer", SND_SOC_NOPM, 0, 0,
+		&adcx140_output_mixer_controls[0],
+		ARRAY_SIZE(adcx140_output_mixer_controls)),
+
+	/* Input Selection to MIC_PGA */
+	SND_SOC_DAPM_MUX("MIC1P Input Mux", SND_SOC_NOPM, 0, 0,
+			 &adcx140_dapm_mic1p_control),
+	SND_SOC_DAPM_MUX("MIC2P Input Mux", SND_SOC_NOPM, 0, 0,
+			 &adcx140_dapm_mic2p_control),
+	SND_SOC_DAPM_MUX("MIC3P Input Mux", SND_SOC_NOPM, 0, 0,
+			 &adcx140_dapm_mic3p_control),
+	SND_SOC_DAPM_MUX("MIC4P Input Mux", SND_SOC_NOPM, 0, 0,
+			 &adcx140_dapm_mic4p_control),
+
+	/* Input Selection to MIC_PGA */
+	SND_SOC_DAPM_MUX("MIC1 Analog Mux", SND_SOC_NOPM, 0, 0,
+			 &adcx140_dapm_mic1_analog_control),
+	SND_SOC_DAPM_MUX("MIC2 Analog Mux", SND_SOC_NOPM, 0, 0,
+			 &adcx140_dapm_mic2_analog_control),
+	SND_SOC_DAPM_MUX("MIC3 Analog Mux", SND_SOC_NOPM, 0, 0,
+			 &adcx140_dapm_mic3_analog_control),
+	SND_SOC_DAPM_MUX("MIC4 Analog Mux", SND_SOC_NOPM, 0, 0,
+			 &adcx140_dapm_mic4_analog_control),
+
+	SND_SOC_DAPM_MUX("MIC1M Input Mux", SND_SOC_NOPM, 0, 0,
+			 &adcx140_dapm_mic1m_control),
+	SND_SOC_DAPM_MUX("MIC2M Input Mux", SND_SOC_NOPM, 0, 0,
+			 &adcx140_dapm_mic2m_control),
+	SND_SOC_DAPM_MUX("MIC3M Input Mux", SND_SOC_NOPM, 0, 0,
+			 &adcx140_dapm_mic3m_control),
+	SND_SOC_DAPM_MUX("MIC4M Input Mux", SND_SOC_NOPM, 0, 0,
+			 &adcx140_dapm_mic4m_control),
+
+	SND_SOC_DAPM_PGA("MIC_GAIN_CTL_CH1", SND_SOC_NOPM, 0, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("MIC_GAIN_CTL_CH2", SND_SOC_NOPM, 0, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("MIC_GAIN_CTL_CH3", SND_SOC_NOPM, 0, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("MIC_GAIN_CTL_CH4", SND_SOC_NOPM, 0, 0, NULL, 0),
+
+	SND_SOC_DAPM_ADC("CH1_ADC", "CH1 Capture", ADCX140_IN_CH_EN, 7, 0),
+	SND_SOC_DAPM_ADC("CH2_ADC", "CH2 Capture", ADCX140_IN_CH_EN, 6, 0),
+	SND_SOC_DAPM_ADC("CH3_ADC", "CH3 Capture", ADCX140_IN_CH_EN, 5, 0),
+	SND_SOC_DAPM_ADC("CH4_ADC", "CH4 Capture", ADCX140_IN_CH_EN, 4, 0),
+
+	SND_SOC_DAPM_SWITCH("CH1_ASI_EN", SND_SOC_NOPM, 0, 0,
+			    &adcx140_dapm_ch1_en_switch),
+	SND_SOC_DAPM_SWITCH("CH2_ASI_EN", SND_SOC_NOPM, 0, 0,
+			    &adcx140_dapm_ch2_en_switch),
+	SND_SOC_DAPM_SWITCH("CH3_ASI_EN", SND_SOC_NOPM, 0, 0,
+			    &adcx140_dapm_ch3_en_switch),
+	SND_SOC_DAPM_SWITCH("CH4_ASI_EN", SND_SOC_NOPM, 0, 0,
+			    &adcx140_dapm_ch4_en_switch),
+
+	SND_SOC_DAPM_SWITCH("DRE_ENABLE", SND_SOC_NOPM, 0, 0,
+			    &adcx140_dapm_dre_en_switch),
+
+	SND_SOC_DAPM_SWITCH("CH1_DRE_EN", SND_SOC_NOPM, 0, 0,
+			    &adcx140_dapm_ch1_dre_en_switch),
+	SND_SOC_DAPM_SWITCH("CH2_DRE_EN", SND_SOC_NOPM, 0, 0,
+			    &adcx140_dapm_ch2_dre_en_switch),
+	SND_SOC_DAPM_SWITCH("CH3_DRE_EN", SND_SOC_NOPM, 0, 0,
+			    &adcx140_dapm_ch3_dre_en_switch),
+	SND_SOC_DAPM_SWITCH("CH4_DRE_EN", SND_SOC_NOPM, 0, 0,
+			    &adcx140_dapm_ch4_dre_en_switch),
+
+	SND_SOC_DAPM_MUX("IN1 Analog Mic Resistor", SND_SOC_NOPM, 0, 0,
+			in1_resistor_controls),
+	SND_SOC_DAPM_MUX("IN2 Analog Mic Resistor", SND_SOC_NOPM, 0, 0,
+			in2_resistor_controls),
+	SND_SOC_DAPM_MUX("IN3 Analog Mic Resistor", SND_SOC_NOPM, 0, 0,
+			in3_resistor_controls),
+	SND_SOC_DAPM_MUX("IN4 Analog Mic Resistor", SND_SOC_NOPM, 0, 0,
+			in4_resistor_controls),
+
+	SND_SOC_DAPM_MUX("Decimation Filter", SND_SOC_NOPM, 0, 0,
+			decimation_filter_controls),
+};
+
+static const struct snd_soc_dapm_route adcx140_audio_map[] = {
+	/* Outputs */
+	{"CH1_OUT", NULL, "Output Mixer"},
+	{"CH2_OUT", NULL, "Output Mixer"},
+	{"CH3_OUT", NULL, "Output Mixer"},
+	{"CH4_OUT", NULL, "Output Mixer"},
+
+	{"CH1_ASI_EN", "Switch", "CH1_ADC"},
+	{"CH2_ASI_EN", "Switch", "CH2_ADC"},
+	{"CH3_ASI_EN", "Switch", "CH3_ADC"},
+	{"CH4_ASI_EN", "Switch", "CH4_ADC"},
+
+	{"Decimation Filter", "Linear Phase", "DRE_ENABLE"},
+	{"Decimation Filter", "Low Latency", "DRE_ENABLE"},
+	{"Decimation Filter", "Ultra-low Latency", "DRE_ENABLE"},
+
+	{"DRE_ENABLE", "Switch", "CH1_DRE_EN"},
+	{"DRE_ENABLE", "Switch", "CH2_DRE_EN"},
+	{"DRE_ENABLE", "Switch", "CH3_DRE_EN"},
+	{"DRE_ENABLE", "Switch", "CH4_DRE_EN"},
+
+	{"CH1_DRE_EN", "Switch", "CH1_ADC"},
+	{"CH2_DRE_EN", "Switch", "CH2_ADC"},
+	{"CH3_DRE_EN", "Switch", "CH3_ADC"},
+	{"CH4_DRE_EN", "Switch", "CH4_ADC"},
+
+	/* Mic input */
+	{"CH1_ADC", NULL, "MIC_GAIN_CTL_CH1"},
+	{"CH2_ADC", NULL, "MIC_GAIN_CTL_CH2"},
+	{"CH3_ADC", NULL, "MIC_GAIN_CTL_CH3"},
+	{"CH4_ADC", NULL, "MIC_GAIN_CTL_CH4"},
+
+	{"MIC_GAIN_CTL_CH1", NULL, "IN1 Analog Mic Resistor"},
+	{"MIC_GAIN_CTL_CH1", NULL, "IN1 Analog Mic Resistor"},
+	{"MIC_GAIN_CTL_CH2", NULL, "IN2 Analog Mic Resistor"},
+	{"MIC_GAIN_CTL_CH2", NULL, "IN2 Analog Mic Resistor"},
+	{"MIC_GAIN_CTL_CH3", NULL, "IN3 Analog Mic Resistor"},
+	{"MIC_GAIN_CTL_CH3", NULL, "IN3 Analog Mic Resistor"},
+	{"MIC_GAIN_CTL_CH4", NULL, "IN4 Analog Mic Resistor"},
+	{"MIC_GAIN_CTL_CH4", NULL, "IN4 Analog Mic Resistor"},
+
+	{"IN1 Analog Mic Resistor", "2.5 kOhm", "MIC1P Input Mux"},
+	{"IN1 Analog Mic Resistor", "10 kOhm", "MIC1P Input Mux"},
+	{"IN1 Analog Mic Resistor", "20 kOhm", "MIC1P Input Mux"},
+
+	{"IN1 Analog Mic Resistor", "2.5 kOhm", "MIC1M Input Mux"},
+	{"IN1 Analog Mic Resistor", "10 kOhm", "MIC1M Input Mux"},
+	{"IN1 Analog Mic Resistor", "20 kOhm", "MIC1M Input Mux"},
+
+	{"IN2 Analog Mic Resistor", "2.5 kOhm", "MIC2P Input Mux"},
+	{"IN2 Analog Mic Resistor", "10 kOhm", "MIC2P Input Mux"},
+	{"IN2 Analog Mic Resistor", "20 kOhm", "MIC2P Input Mux"},
+
+	{"IN2 Analog Mic Resistor", "2.5 kOhm", "MIC2M Input Mux"},
+	{"IN2 Analog Mic Resistor", "10 kOhm", "MIC2M Input Mux"},
+	{"IN2 Analog Mic Resistor", "20 kOhm", "MIC2M Input Mux"},
+
+	{"IN3 Analog Mic Resistor", "2.5 kOhm", "MIC3P Input Mux"},
+	{"IN3 Analog Mic Resistor", "10 kOhm", "MIC3P Input Mux"},
+	{"IN3 Analog Mic Resistor", "20 kOhm", "MIC3P Input Mux"},
+
+	{"IN3 Analog Mic Resistor", "2.5 kOhm", "MIC3M Input Mux"},
+	{"IN3 Analog Mic Resistor", "10 kOhm", "MIC3M Input Mux"},
+	{"IN3 Analog Mic Resistor", "20 kOhm", "MIC3M Input Mux"},
+
+	{"IN4 Analog Mic Resistor", "2.5 kOhm", "MIC4P Input Mux"},
+	{"IN4 Analog Mic Resistor", "10 kOhm", "MIC4P Input Mux"},
+	{"IN4 Analog Mic Resistor", "20 kOhm", "MIC4P Input Mux"},
+
+	{"IN4 Analog Mic Resistor", "2.5 kOhm", "MIC4M Input Mux"},
+	{"IN4 Analog Mic Resistor", "10 kOhm", "MIC4M Input Mux"},
+	{"IN4 Analog Mic Resistor", "20 kOhm", "MIC4M Input Mux"},
+
+	{"MIC1 Analog Mux", "Line In", "MIC1P"},
+	{"MIC2 Analog Mux", "Line In", "MIC2P"},
+	{"MIC3 Analog Mux", "Line In", "MIC3P"},
+	{"MIC4 Analog Mux", "Line In", "MIC4P"},
+
+	{"MIC1P Input Mux", "Analog", "MIC1P"},
+	{"MIC1M Input Mux", "Analog", "MIC1M"},
+	{"MIC2P Input Mux", "Analog", "MIC2P"},
+	{"MIC2M Input Mux", "Analog", "MIC2M"},
+	{"MIC3P Input Mux", "Analog", "MIC3P"},
+	{"MIC3M Input Mux", "Analog", "MIC3M"},
+	{"MIC4P Input Mux", "Analog", "MIC4P"},
+	{"MIC4M Input Mux", "Analog", "MIC4M"},
+};
+
+static const struct snd_kcontrol_new adcx140_snd_controls[] = {
+	SOC_SINGLE_TLV("Analog CH1 Mic Gain Volume", ADCX140_CH1_CFG1, 2, 42, 0,
+			adc_tlv),
+	SOC_SINGLE_TLV("Analog CH2 Mic Gain Volume", ADCX140_CH1_CFG2, 2, 42, 0,
+			adc_tlv),
+	SOC_SINGLE_TLV("Analog CH3 Mic Gain Volume", ADCX140_CH1_CFG3, 2, 42, 0,
+			adc_tlv),
+	SOC_SINGLE_TLV("Analog CH4 Mic Gain Volume", ADCX140_CH1_CFG4, 2, 42, 0,
+			adc_tlv),
+
+	SOC_SINGLE_TLV("DRE Threshold", ADCX140_DRE_CFG0, 4, 9, 0,
+		       dre_thresh_tlv),
+	SOC_SINGLE_TLV("DRE Max Gain", ADCX140_DRE_CFG0, 0, 12, 0,
+		       dre_gain_tlv),
+
+	SOC_SINGLE_TLV("AGC Threshold", ADCX140_AGC_CFG0, 4, 15, 0,
+		       agc_thresh_tlv),
+	SOC_SINGLE_TLV("AGC Max Gain", ADCX140_AGC_CFG0, 0, 13, 0,
+		       agc_gain_tlv),
+
+	SOC_SINGLE_TLV("Digital CH1 Out Volume", ADCX140_CH1_CFG2,
+			0, 0xff, 0, dig_vol_tlv),
+	SOC_SINGLE_TLV("Digital CH2 Out Volume", ADCX140_CH2_CFG2,
+			0, 0xff, 0, dig_vol_tlv),
+	SOC_SINGLE_TLV("Digital CH3 Out Volume", ADCX140_CH3_CFG2,
+			0, 0xff, 0, dig_vol_tlv),
+	SOC_SINGLE_TLV("Digital CH4 Out Volume", ADCX140_CH4_CFG2,
+			0, 0xff, 0, dig_vol_tlv),
+	SOC_SINGLE_TLV("Digital CH5 Out Volume", ADCX140_CH5_CFG2,
+			0, 0xff, 0, dig_vol_tlv),
+	SOC_SINGLE_TLV("Digital CH6 Out Volume", ADCX140_CH6_CFG2,
+			0, 0xff, 0, dig_vol_tlv),
+	SOC_SINGLE_TLV("Digital CH7 Out Volume", ADCX140_CH7_CFG2,
+			0, 0xff, 0, dig_vol_tlv),
+	SOC_SINGLE_TLV("Digital CH8 Out Volume", ADCX140_CH8_CFG2,
+			0, 0xff, 0, dig_vol_tlv),
+};
+
+static int adcx140_reset(struct adcx140_priv *adcx140)
+{
+	int ret = 0;
+
+	if (adcx140->gpio_reset) {
+		gpiod_direction_output(adcx140->gpio_reset, 0);
+		/* 8.4.1: wait for hw shutdown (25ms) + >= 1ms */
+		usleep_range(30000, 100000);
+		gpiod_direction_output(adcx140->gpio_reset, 1);
+	} else {
+		ret = regmap_write(adcx140->regmap, ADCX140_SW_RESET,
+		          ADCX140_RESET);
+	}
+
+	/* 8.4.2: wait >= 10 ms after entering sleep mode. */
+	usleep_range(10000, 100000);
+
+	return 0;
+}
+
+static int adcx140_hw_params(struct snd_pcm_substream *substream,
+			     struct snd_pcm_hw_params *params,
+			     struct snd_soc_dai *dai)
+{
+	struct snd_soc_component *component = dai->component;
+	u8 data = 0;
+
+	switch (params_width(params)) {
+	case 16:
+		data = ADCX140_16_BIT_WORD;
+		break;
+	case 20:
+		data = ADCX140_20_BIT_WORD;
+		break;
+	case 24:
+		data = ADCX140_24_BIT_WORD;
+		break;
+	case 32:
+		data = ADCX140_32_BIT_WORD;
+		break;
+	default:
+		dev_err(component->dev, "%s: Unsupported width %d\n",
+			__func__, params_width(params));
+		return -EINVAL;
+	}
+
+	snd_soc_component_update_bits(component, ADCX140_ASI_CFG0,
+			    ADCX140_WORD_LEN_MSK, data);
+
+	return 0;
+}
+
+static int adcx140_set_dai_fmt(struct snd_soc_dai *codec_dai,
+			       unsigned int fmt)
+{
+	struct snd_soc_component *component = codec_dai->component;
+	struct adcx140_priv *adcx140 = snd_soc_component_get_drvdata(component);
+	u8 iface_reg1 = 0;
+	u8 iface_reg2 = 0;
+
+	/* set master/slave audio interface */
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBM_CFM:
+		iface_reg2 |= ADCX140_BCLK_FSYNC_MASTER;
+		break;
+	case SND_SOC_DAIFMT_CBS_CFS:
+		break;
+	case SND_SOC_DAIFMT_CBS_CFM:
+	case SND_SOC_DAIFMT_CBM_CFS:
+	default:
+		dev_err(component->dev, "Invalid DAI master/slave interface\n");
+		return -EINVAL;
+	}
+
+	/* signal polarity */
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_IF:
+		iface_reg1 |= ADCX140_FSYNCINV_BIT;
+		break;
+	case SND_SOC_DAIFMT_IB_IF:
+		iface_reg1 |= ADCX140_BCLKINV_BIT | ADCX140_FSYNCINV_BIT;
+		break;
+	case SND_SOC_DAIFMT_IB_NF:
+		iface_reg1 |= ADCX140_BCLKINV_BIT;
+		break;
+	case SND_SOC_DAIFMT_NB_NF:
+		break;
+	default:
+		dev_err(component->dev, "Invalid DAI clock signal polarity\n");
+		return -EINVAL;
+	}
+
+	/* interface format */
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		iface_reg1 |= ADCX140_I2S_MODE_BIT;
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		iface_reg1 |= ADCX140_LEFT_JUST_BIT;
+		break;
+	case SND_SOC_DAIFMT_DSP_A:
+	case SND_SOC_DAIFMT_DSP_B:
+		break;
+	default:
+		dev_err(component->dev, "Invalid DAI interface format\n");
+		return -EINVAL;
+	}
+
+	adcx140->dai_fmt = fmt & SND_SOC_DAIFMT_FORMAT_MASK;
+
+	snd_soc_component_update_bits(component, ADCX140_ASI_CFG0,
+				      ADCX140_FSYNCINV_BIT |
+				      ADCX140_BCLKINV_BIT |
+				      ADCX140_ASI_FORMAT_MSK,
+				      iface_reg1);
+	snd_soc_component_update_bits(component, ADCX140_MST_CFG0,
+				      ADCX140_BCLK_FSYNC_MASTER, iface_reg2);
+
+	return 0;
+}
+
+static int adcx140_set_dai_tdm_slot(struct snd_soc_dai *codec_dai,
+				  unsigned int tx_mask, unsigned int rx_mask,
+				  int slots, int slot_width)
+{
+	struct snd_soc_component *component = codec_dai->component;
+	struct adcx140_priv *adcx140 = snd_soc_component_get_drvdata(component);
+	unsigned int lsb;
+
+	if (tx_mask != rx_mask) {
+		dev_err(component->dev, "tx and rx masks must be symmetric\n");
+		return -EINVAL;
+	}
+
+	/* TDM based on DSP mode requires slots to be adjacent */
+	lsb = __ffs(tx_mask);
+	if ((lsb + 1) != __fls(tx_mask)) {
+		dev_err(component->dev, "Invalid mask, slots must be adjacent\n");
+		return -EINVAL;
+	}
+
+	switch (slot_width) {
+	case 16:
+	case 20:
+	case 24:
+	case 32:
+		break;
+	default:
+		dev_err(component->dev, "Unsupported slot width %d\n", slot_width);
+		return -EINVAL;
+	}
+
+	adcx140->tdm_delay = lsb;
+	adcx140->slot_width = slot_width;
+
+	return 0;
+}
+
+static int adcx140_prepare(struct snd_pcm_substream *substream,
+			 struct snd_soc_dai *dai)
+{
+	struct snd_soc_component *component = dai->component;
+	struct adcx140_priv *adcx140 = snd_soc_component_get_drvdata(component);
+	int offset = 0;
+	int width = adcx140->slot_width;
+
+	if (!width)
+		width = substream->runtime->sample_bits;
+
+	/* TDM slot selection only valid in DSP_A/_B mode */
+	if (adcx140->dai_fmt == SND_SOC_DAIFMT_DSP_A)
+		offset += (adcx140->tdm_delay * width + 1);
+	else if (adcx140->dai_fmt == SND_SOC_DAIFMT_DSP_B)
+		offset += adcx140->tdm_delay * width;
+
+	/* Configure data offset */
+	snd_soc_component_update_bits(component, ADCX140_ASI_CFG1,
+				      ADCX140_TX_OFFSET_MASK, offset);
+
+	return 0;
+}
+
+static const struct snd_soc_dai_ops adcx140_dai_ops = {
+	.hw_params	= adcx140_hw_params,
+	.set_fmt	= adcx140_set_dai_fmt,
+	.prepare	= adcx140_prepare,
+	.set_tdm_slot	= adcx140_set_dai_tdm_slot,
+};
+
+static int adcx140_codec_probe(struct snd_soc_component *component)
+{
+	struct adcx140_priv *adcx140 = snd_soc_component_get_drvdata(component);
+	int sleep_cfg_val = ADCX140_WAKE_DEV;
+	u8 bias_source;
+	u8 vref_source;
+	int ret;
+
+	ret = device_property_read_u8(adcx140->dev, "ti,mic-bias-source",
+				      &bias_source);
+	if (ret)
+		bias_source = ADCX140_MIC_BIAS_VAL_VREF;
+
+	if (bias_source < ADCX140_MIC_BIAS_VAL_VREF ||
+	    bias_source > ADCX140_MIC_BIAS_VAL_AVDD) {
+		dev_err(adcx140->dev, "Mic Bias source value is invalid\n");
+		return -EINVAL;
+	}
+
+	ret = device_property_read_u8(adcx140->dev, "ti,vref-source",
+				      &vref_source);
+	if (ret)
+		vref_source = ADCX140_MIC_BIAS_VREF_275V;
+
+	if (vref_source < ADCX140_MIC_BIAS_VREF_275V ||
+	    vref_source > ADCX140_MIC_BIAS_VREF_1375V) {
+		dev_err(adcx140->dev, "Mic Bias source value is invalid\n");
+		return -EINVAL;
+	}
+
+	bias_source |= vref_source;
+
+	ret = adcx140_reset(adcx140);
+	if (ret)
+		goto out;
+
+	if(adcx140->supply_areg == NULL)
+		sleep_cfg_val |= ADCX140_AREG_INTERNAL;
+
+	ret = regmap_write(adcx140->regmap, ADCX140_SLEEP_CFG, sleep_cfg_val);
+	if (ret) {
+		dev_err(adcx140->dev, "setting sleep config failed %d\n", ret);
+		goto out;
+	}
+
+	/* 8.4.3: Wait >= 1ms after entering active mode. */
+	usleep_range(1000, 100000);
+
+	ret = regmap_update_bits(adcx140->regmap, ADCX140_BIAS_CFG,
+				ADCX140_MIC_BIAS_VAL_MSK |
+				ADCX140_MIC_BIAS_VREF_MSK, bias_source);
+	if (ret)
+		dev_err(adcx140->dev, "setting MIC bias failed %d\n", ret);
+out:
+	return ret;
+}
+
+static int adcx140_set_bias_level(struct snd_soc_component *component,
+				  enum snd_soc_bias_level level)
+{
+	struct adcx140_priv *adcx140 = snd_soc_component_get_drvdata(component);
+	int pwr_cfg = 0;
+
+	switch (level) {
+	case SND_SOC_BIAS_ON:
+	case SND_SOC_BIAS_PREPARE:
+	case SND_SOC_BIAS_STANDBY:
+		pwr_cfg = ADCX140_PWR_CFG_BIAS_PDZ | ADCX140_PWR_CFG_PLL_PDZ |
+			  ADCX140_PWR_CFG_ADC_PDZ;
+		break;
+	case SND_SOC_BIAS_OFF:
+		pwr_cfg = 0x0;
+		break;
+	}
+
+	return regmap_write(adcx140->regmap, ADCX140_PWR_CFG, pwr_cfg);
+}
+
+static const struct snd_soc_component_driver soc_codec_driver_adcx140 = {
+	.probe			= adcx140_codec_probe,
+	.set_bias_level		= adcx140_set_bias_level,
+	.controls		= adcx140_snd_controls,
+	.num_controls		= ARRAY_SIZE(adcx140_snd_controls),
+	.dapm_widgets		= adcx140_dapm_widgets,
+	.num_dapm_widgets	= ARRAY_SIZE(adcx140_dapm_widgets),
+	.dapm_routes		= adcx140_audio_map,
+	.num_dapm_routes	= ARRAY_SIZE(adcx140_audio_map),
+	.suspend_bias_off	= 1,
+	.idle_bias_on		= 0,
+	.use_pmdown_time	= 1,
+	.endianness		= 1,
+	.non_legacy_dai_naming	= 1,
+};
+
+static struct snd_soc_dai_driver adcx140_dai_driver[] = {
+	{
+		.name = "tlv320adcx140-codec",
+		.capture = {
+			.stream_name	 = "Capture",
+			.channels_min	 = 2,
+			.channels_max	 = ADCX140_MAX_CHANNELS,
+			.rates		 = ADCX140_RATES,
+			.formats	 = ADCX140_FORMATS,
+		},
+		.ops = &adcx140_dai_ops,
+		.symmetric_rates = 1,
+	}
+};
+
+static const struct of_device_id tlv320adcx140_of_match[] = {
+	{ .compatible = "ti,tlv320adc3140" },
+	{ .compatible = "ti,tlv320adc5140" },
+	{ .compatible = "ti,tlv320adc6140" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, tlv320adcx140_of_match);
+
+static int adcx140_i2c_probe(struct i2c_client *i2c,
+			     const struct i2c_device_id *id)
+{
+	struct adcx140_priv *adcx140;
+	int ret;
+
+	adcx140 = devm_kzalloc(&i2c->dev, sizeof(*adcx140), GFP_KERNEL);
+	if (!adcx140)
+		return -ENOMEM;
+
+	adcx140->gpio_reset = devm_gpiod_get_optional(adcx140->dev,
+						      "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(adcx140->gpio_reset))
+		dev_info(&i2c->dev, "Reset GPIO not defined\n");
+
+	adcx140->supply_areg = devm_regulator_get_optional(adcx140->dev,
+							   "areg");
+	if (IS_ERR(adcx140->supply_areg)) {
+		if (PTR_ERR(adcx140->supply_areg) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+		else
+			adcx140->supply_areg = NULL;
+	} else {
+		ret = regulator_enable(adcx140->supply_areg);
+		if (ret) {
+			dev_err(adcx140->dev, "Failed to enable areg\n");
+			return ret;
+		}
+	}
+
+	adcx140->regmap = devm_regmap_init_i2c(i2c, &adcx140_i2c_regmap);
+	if (IS_ERR(adcx140->regmap)) {
+		ret = PTR_ERR(adcx140->regmap);
+		dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
+			ret);
+		return ret;
+	}
+	adcx140->dev = &i2c->dev;
+	i2c_set_clientdata(i2c, adcx140);
+
+	return devm_snd_soc_register_component(&i2c->dev,
+					       &soc_codec_driver_adcx140,
+					       adcx140_dai_driver, 1);
+}
+
+static const struct i2c_device_id adcx140_i2c_id[] = {
+	{ "tlv320adc3140", 0 },
+	{ "tlv320adc5140", 1 },
+	{ "tlv320adc6140", 2 },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, adcx140_i2c_id);
+
+static struct i2c_driver adcx140_i2c_driver = {
+	.driver = {
+		.name	= "tlv320adcx140-codec",
+		.of_match_table = of_match_ptr(tlv320adcx140_of_match),
+	},
+	.probe		= adcx140_i2c_probe,
+	.id_table	= adcx140_i2c_id,
+};
+module_i2c_driver(adcx140_i2c_driver);
+
+MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
+MODULE_DESCRIPTION("ASoC TLV320ADCX140 CODEC Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/sound/soc/codecs/tlv320adcx140.h b/sound/soc/codecs/tlv320adcx140.h
new file mode 100644
index 0000000..6d055e5
--- /dev/null
+++ b/sound/soc/codecs/tlv320adcx140.h
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0
+// TLV320ADCX104 Sound driver
+// Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+
+#ifndef _TLV320ADCX140_H
+#define _TLV320ADCX140_H
+
+#define ADCX140_RATES	(SNDRV_PCM_RATE_44100 | \
+			 SNDRV_PCM_RATE_48000)
+
+#define ADCX140_FORMATS	(SNDRV_PCM_FMTBIT_S16_LE | \
+			 SNDRV_PCM_FMTBIT_S20_3LE | \
+			 SNDRV_PCM_FMTBIT_S24_3LE | \
+			 SNDRV_PCM_FMTBIT_S24_LE | \
+			 SNDRV_PCM_FMTBIT_S32_LE)
+
+#define ADCX140_PAGE_SELECT	0x00
+#define ADCX140_SW_RESET	0x01
+#define ADCX140_SLEEP_CFG 	0x02
+#define ADCX140_SHDN_CFG	0x05
+#define ADCX140_ASI_CFG0	0x07
+#define ADCX140_ASI_CFG1	0x08
+#define ADCX140_ASI_CFG2	0x09
+#define ADCX140_ASI_CH1		0x0b
+#define ADCX140_ASI_CH2		0x0c
+#define ADCX140_ASI_CH3		0x0d
+#define ADCX140_ASI_CH4		0x0e
+#define ADCX140_ASI_CH5		0x0f
+#define ADCX140_ASI_CH6		0x10
+#define ADCX140_ASI_CH7		0x11
+#define ADCX140_ASI_CH8		0x12
+#define ADCX140_MST_CFG0	0x13
+#define ADCX140_MST_CFG1	0x14
+#define ADCX140_ASI_STS		0x15
+#define ADCX140_CLK_SRC		0x16
+#define ADCX140_PDMCLK_CFG	0x1f
+#define ADCX140_PDM_CFG		0x20
+#define ADCX140_GPIO_CFG0	0x21
+#define ADCX140_GPO_CFG1	0x22
+#define ADCX140_GPO_CFG2	0x23
+#define ADCX140_GPO_CFG3	0x24
+#define ADCX140_GPO_CFG4	0x25
+#define ADCX140_GPO_VAL		0x29
+#define ADCX140_GPIO_MON	0x2a
+#define ADCX140_GPI_CFG0	0x2b
+#define ADCX140_GPI_CFG1	0x2c
+#define ADCX140_GPI_MON		0x2f
+#define ADCX140_INT_CFG		0x32
+#define ADCX140_INT_MASK0	0x33
+#define ADCX140_INT_LTCH0	0x36
+#define ADCX140_BIAS_CFG	0x3b
+#define ADCX140_CH1_CFG0	0x3c
+#define ADCX140_CH1_CFG1	0x3d
+#define ADCX140_CH1_CFG2	0x3e
+#define ADCX140_CH1_CFG3	0x3f
+#define ADCX140_CH1_CFG4	0x40
+#define ADCX140_CH2_CFG0	0x41
+#define ADCX140_CH2_CFG1	0x42
+#define ADCX140_CH2_CFG2	0x43
+#define ADCX140_CH2_CFG3	0x44
+#define ADCX140_CH2_CFG4	0x45
+#define ADCX140_CH3_CFG0	0x46
+#define ADCX140_CH3_CFG1	0x47
+#define ADCX140_CH3_CFG2	0x48
+#define ADCX140_CH3_CFG3	0x49
+#define ADCX140_CH3_CFG4 	0x4a
+#define ADCX140_CH4_CFG0	0x4b
+#define ADCX140_CH4_CFG1	0x4c
+#define ADCX140_CH4_CFG2	0x4d
+#define ADCX140_CH4_CFG3	0x4e
+#define ADCX140_CH4_CFG4	0x4f
+#define ADCX140_CH5_CFG2	0x52
+#define ADCX140_CH5_CFG3	0x53
+#define ADCX140_CH5_CFG4	0x54
+#define ADCX140_CH6_CFG2	0x57
+#define ADCX140_CH6_CFG3	0x58
+#define ADCX140_CH6_CFG4	0x59
+#define ADCX140_CH7_CFG2	0x5c
+#define ADCX140_CH7_CFG3	0x5d
+#define ADCX140_CH7_CFG4	0x5e
+#define ADCX140_CH8_CFG2	0x61
+#define ADCX140_CH8_CFG3	0x62
+#define ADCX140_CH8_CFG4	0x63
+#define ADCX140_DSP_CFG0	0x6b
+#define ADCX140_DSP_CFG1	0x6c
+#define ADCX140_DRE_CFG0	0x6d
+#define ADCX140_AGC_CFG0	0x70
+#define ADCX140_IN_CH_EN	0x73
+#define ADCX140_ASI_OUT_CH_EN	0x74
+#define ADCX140_PWR_CFG		0x75
+#define ADCX140_DEV_STS0	0x76
+#define ADCX140_DEV_STS1	0x77
+
+#define ADCX140_RESET	BIT(0)
+
+#define ADCX140_WAKE_DEV	BIT(0)
+#define ADCX140_AREG_INTERNAL	BIT(7)
+
+#define ADCX140_BCLKINV_BIT	BIT(2)
+#define ADCX140_FSYNCINV_BIT	BIT(3)
+#define ADCX140_INV_MSK		(ADCX140_BCLKINV_BIT | ADCX140_FSYNCINV_BIT)
+#define ADCX140_BCLK_FSYNC_MASTER	BIT(7)
+#define ADCX140_I2S_MODE_BIT	BIT(6)
+#define ADCX140_LEFT_JUST_BIT	BIT(7)
+#define ADCX140_ASI_FORMAT_MSK	(ADCX140_I2S_MODE_BIT | ADCX140_LEFT_JUST_BIT)
+
+#define ADCX140_16_BIT_WORD	0x0
+#define ADCX140_20_BIT_WORD	BIT(4)
+#define ADCX140_24_BIT_WORD	BIT(5)
+#define ADCX140_32_BIT_WORD	(BIT(4) | BIT(5))
+#define ADCX140_WORD_LEN_MSK	0x30
+
+#define ADCX140_MAX_CHANNELS	8
+
+#define ADCX140_MIC_BIAS_VAL_VREF	0
+#define ADCX140_MIC_BIAS_VAL_VREF_1096	1
+#define ADCX140_MIC_BIAS_VAL_AVDD	6
+#define ADCX140_MIC_BIAS_VAL_MSK GENMASK(6, 4)
+
+#define ADCX140_MIC_BIAS_VREF_275V	0
+#define ADCX140_MIC_BIAS_VREF_25V	1
+#define ADCX140_MIC_BIAS_VREF_1375V	2
+#define ADCX140_MIC_BIAS_VREF_MSK GENMASK(1, 0)
+
+#define ADCX140_PWR_CFG_BIAS_PDZ	BIT(7)
+#define ADCX140_PWR_CFG_ADC_PDZ		BIT(6)
+#define ADCX140_PWR_CFG_PLL_PDZ		BIT(5)
+
+#define ADCX140_TX_OFFSET_MASK		GENMASK(4, 0)
+
+#endif /* _TLV320ADCX140_ */
diff --git a/sound/soc/codecs/wcd9335.c b/sound/soc/codecs/wcd9335.c
index f11ffa2..700cc12 100644
--- a/sound/soc/codecs/wcd9335.c
+++ b/sound/soc/codecs/wcd9335.c
@@ -4926,11 +4926,11 @@ static const struct regmap_range_cfg wcd9335_ranges[] = {
 		.name = "WCD9335",
 		.range_min =  0x0,
 		.range_max =  WCD9335_MAX_REGISTER,
-		.selector_reg = WCD9335_REG(0x0, 0),
+		.selector_reg = WCD9335_SEL_REGISTER,
 		.selector_mask = 0xff,
 		.selector_shift = 0,
-		.window_start = 0x0,
-		.window_len = 0x1000,
+		.window_start = 0x800,
+		.window_len = 0x100,
 	},
 };
 
@@ -4968,12 +4968,12 @@ static const struct regmap_range_cfg wcd9335_ifc_ranges[] = {
 	{
 		.name = "WCD9335-IFC-DEV",
 		.range_min =  0x0,
-		.range_max = WCD9335_REG(0, 0x7ff),
-		.selector_reg = WCD9335_REG(0, 0x0),
-		.selector_mask = 0xff,
+		.range_max = WCD9335_MAX_REGISTER,
+		.selector_reg = WCD9335_SEL_REGISTER,
+		.selector_mask = 0xfff,
 		.selector_shift = 0,
-		.window_start = 0x0,
-		.window_len = 0x1000,
+		.window_start = 0x800,
+		.window_len = 0x400,
 	},
 };
 
@@ -4981,7 +4981,7 @@ static struct regmap_config wcd9335_ifc_regmap_config = {
 	.reg_bits = 16,
 	.val_bits = 8,
 	.can_multi_write = true,
-	.max_register = WCD9335_REG(0, 0x7FF),
+	.max_register = WCD9335_MAX_REGISTER,
 	.ranges = wcd9335_ifc_ranges,
 	.num_ranges = ARRAY_SIZE(wcd9335_ifc_ranges),
 };
diff --git a/sound/soc/codecs/wcd9335.h b/sound/soc/codecs/wcd9335.h
index 4d9be24..7206082 100644
--- a/sound/soc/codecs/wcd9335.h
+++ b/sound/soc/codecs/wcd9335.h
@@ -8,9 +8,9 @@
  * in slimbus mode the reg base starts from 0x800
  * in i2s/i2c mode the reg base is 0x0
  */
-#define WCD9335_REG(pg, r)	((pg << 12) | (r) | 0x800)
+#define WCD9335_REG(pg, r)	((pg << 8) | (r))
 #define WCD9335_REG_OFFSET(r)	(r & 0xFF)
-#define WCD9335_PAGE_OFFSET(r)	((r >> 12) & 0xFF)
+#define WCD9335_PAGE_OFFSET(r)	((r >> 8) & 0xFF)
 
 /* Page-0 Registers */
 #define WCD9335_PAGE0_PAGE_REGISTER		WCD9335_REG(0x00, 0x000)
@@ -600,7 +600,8 @@
 #define WCD9335_CDC_CLK_RST_CTRL_FS_CNT_ENABLE	BIT(0)
 #define WCD9335_CDC_CLK_RST_CTRL_FS_CNT_DISABLE	0
 #define WCD9335_CDC_TOP_TOP_CFG1	WCD9335_REG(0x0d, 0x082)
-#define WCD9335_MAX_REGISTER	WCD9335_REG(0x80, 0x0FF)
+#define WCD9335_MAX_REGISTER	0xffff
+#define WCD9335_SEL_REGISTER	0x800
 
 /* SLIMBUS Slave Registers */
 #define WCD9335_SLIM_PGD_PORT_INT_EN0	WCD9335_REG(0, 0x30)
diff --git a/sound/soc/codecs/wcd934x.c b/sound/soc/codecs/wcd934x.c
index 158e878..5269857 100644
--- a/sound/soc/codecs/wcd934x.c
+++ b/sound/soc/codecs/wcd934x.c
@@ -3,7 +3,6 @@
 
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
-#include <linux/gpio.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/mfd/wcd934x/registers.h>
@@ -11,10 +10,7 @@
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/of_clk.h>
-#include <linux/of_device.h>
-#include <linux/of_gpio.h>
 #include <linux/of.h>
-#include <linux/of_irq.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
@@ -1202,11 +1198,6 @@ static int wcd934x_set_sido_input_src(struct wcd934x_codec *wcd, int sido_src)
 		regmap_update_bits(wcd->regmap, WCD934X_ANA_RCO,
 				   WCD934X_ANA_RCO_BG_EN_MASK, 0);
 		usleep_range(100, 110);
-	} else if (sido_src == SIDO_SOURCE_RCO_BG) {
-		regmap_update_bits(wcd->regmap, WCD934X_ANA_RCO,
-				   WCD934X_ANA_RCO_BG_EN_MASK,
-				   WCD934X_ANA_RCO_BG_ENABLE);
-		usleep_range(100, 110);
 		regmap_update_bits(wcd->regmap, WCD934X_ANA_BUCK_CTL,
 				   WCD934X_ANA_BUCK_PRE_EN1_MASK,
 				   WCD934X_ANA_BUCK_PRE_EN1_ENABLE);
@@ -1219,6 +1210,11 @@ static int wcd934x_set_sido_input_src(struct wcd934x_codec *wcd, int sido_src)
 				   WCD934X_ANA_BUCK_HI_ACCU_EN_MASK,
 				   WCD934X_ANA_BUCK_HI_ACCU_ENABLE);
 		usleep_range(100, 110);
+	} else if (sido_src == SIDO_SOURCE_RCO_BG) {
+		regmap_update_bits(wcd->regmap, WCD934X_ANA_RCO,
+				   WCD934X_ANA_RCO_BG_EN_MASK,
+				   WCD934X_ANA_RCO_BG_ENABLE);
+		usleep_range(100, 110);
 	}
 	wcd->sido_input_src = sido_src;
 
@@ -1883,20 +1879,16 @@ static int wcd934x_set_channel_map(struct snd_soc_dai *dai,
 		return -EINVAL;
 	}
 
-	if (wcd->rx_chs) {
-		wcd->num_rx_port = rx_num;
-		for (i = 0; i < rx_num; i++) {
-			wcd->rx_chs[i].ch_num = rx_slot[i];
-			INIT_LIST_HEAD(&wcd->rx_chs[i].list);
-		}
+	wcd->num_rx_port = rx_num;
+	for (i = 0; i < rx_num; i++) {
+		wcd->rx_chs[i].ch_num = rx_slot[i];
+		INIT_LIST_HEAD(&wcd->rx_chs[i].list);
 	}
 
-	if (wcd->tx_chs) {
-		wcd->num_tx_port = tx_num;
-		for (i = 0; i < tx_num; i++) {
-			wcd->tx_chs[i].ch_num = tx_slot[i];
-			INIT_LIST_HEAD(&wcd->tx_chs[i].list);
-		}
+	wcd->num_tx_port = tx_num;
+	for (i = 0; i < tx_num; i++) {
+		wcd->tx_chs[i].ch_num = tx_slot[i];
+		INIT_LIST_HEAD(&wcd->tx_chs[i].list);
 	}
 
 	return 0;
@@ -3392,18 +3384,15 @@ static void wcd934x_codec_hphdelay_lutbypass(struct snd_soc_component *comp,
 {
 	u8 hph_dly_mask;
 	u16 hph_lut_bypass_reg = 0;
-	u16 hph_comp_ctrl7 = 0;
 
 	switch (interp_idx) {
 	case INTERP_HPHL:
 		hph_dly_mask = 1;
 		hph_lut_bypass_reg = WCD934X_CDC_TOP_HPHL_COMP_LUT;
-		hph_comp_ctrl7 = WCD934X_CDC_COMPANDER1_CTL7;
 		break;
 	case INTERP_HPHR:
 		hph_dly_mask = 2;
 		hph_lut_bypass_reg = WCD934X_CDC_TOP_HPHR_COMP_LUT;
-		hph_comp_ctrl7 = WCD934X_CDC_COMPANDER2_CTL7;
 		break;
 	default:
 		return;
diff --git a/sound/soc/codecs/wm0010.c b/sound/soc/codecs/wm0010.c
index 727d670..fbcee21 100644
--- a/sound/soc/codecs/wm0010.c
+++ b/sound/soc/codecs/wm0010.c
@@ -43,7 +43,7 @@ struct dfw_binrec {
 	u8 command;
 	u32 length:24;
 	u32 address;
-	uint8_t data[0];
+	uint8_t data[];
 } __packed;
 
 struct dfw_inforec {
diff --git a/sound/soc/codecs/wm5110.c b/sound/soc/codecs/wm5110.c
index 9dc215b..499e87d 100644
--- a/sound/soc/codecs/wm5110.c
+++ b/sound/soc/codecs/wm5110.c
@@ -2245,14 +2245,14 @@ static int wm5110_open(struct snd_compr_stream *stream)
 	struct arizona *arizona = priv->core.arizona;
 	int n_adsp;
 
-	if (strcmp(rtd->codec_dai->name, "wm5110-dsp-voicectrl") == 0) {
+	if (strcmp(asoc_rtd_to_codec(rtd, 0)->name, "wm5110-dsp-voicectrl") == 0) {
 		n_adsp = 2;
-	} else if (strcmp(rtd->codec_dai->name, "wm5110-dsp-trace") == 0) {
+	} else if (strcmp(asoc_rtd_to_codec(rtd, 0)->name, "wm5110-dsp-trace") == 0) {
 		n_adsp = 0;
 	} else {
 		dev_err(arizona->dev,
 			"No suitable compressed stream for DAI '%s'\n",
-			rtd->codec_dai->name);
+			asoc_rtd_to_codec(rtd, 0)->name);
 		return -EINVAL;
 	}
 
diff --git a/sound/soc/codecs/wm8974.c b/sound/soc/codecs/wm8974.c
index dc4fe4f..06ba365 100644
--- a/sound/soc/codecs/wm8974.c
+++ b/sound/soc/codecs/wm8974.c
@@ -196,14 +196,6 @@ SOC_DAPM_SINGLE("MicN Switch", WM8974_INPUT, 1, 1, 0),
 SOC_DAPM_SINGLE("MicP Switch", WM8974_INPUT, 0, 1, 0),
 };
 
-/* AUX Input boost vol */
-static const struct snd_kcontrol_new wm8974_aux_boost_controls =
-SOC_DAPM_SINGLE("Aux Volume", WM8974_ADCBOOST, 0, 7, 0);
-
-/* Mic Input boost vol */
-static const struct snd_kcontrol_new wm8974_mic_boost_controls =
-SOC_DAPM_SINGLE("Mic Volume", WM8974_ADCBOOST, 4, 7, 0);
-
 static const struct snd_soc_dapm_widget wm8974_dapm_widgets[] = {
 SND_SOC_DAPM_MIXER("Speaker Mixer", WM8974_POWER3, 2, 0,
 	&wm8974_speaker_mixer_controls[0],
diff --git a/sound/soc/codecs/wm_adsp.c b/sound/soc/codecs/wm_adsp.c
index d3d32b5..1ef6940 100644
--- a/sound/soc/codecs/wm_adsp.c
+++ b/sound/soc/codecs/wm_adsp.c
@@ -1436,12 +1436,12 @@ static int wm_adsp_create_control(struct wm_adsp *dsp,
 		subname = NULL; /* don't append subname */
 		break;
 	case 2:
-		ret = snprintf(name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN,
+		ret = scnprintf(name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN,
 				"%s%c %.12s %x", dsp->name, *region_name,
 				wm_adsp_fw_text[dsp->fw], alg_region->alg);
 		break;
 	default:
-		ret = snprintf(name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN,
+		ret = scnprintf(name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN,
 				"%s %.12s %x", dsp->name,
 				wm_adsp_fw_text[dsp->fw], alg_region->alg);
 		break;
@@ -3467,22 +3467,22 @@ int wm_adsp_compr_open(struct wm_adsp *dsp, struct snd_compr_stream *stream)
 
 	if (wm_adsp_fw[dsp->fw].num_caps == 0) {
 		adsp_err(dsp, "%s: Firmware does not support compressed API\n",
-			 rtd->codec_dai->name);
+			 asoc_rtd_to_codec(rtd, 0)->name);
 		ret = -ENXIO;
 		goto out;
 	}
 
 	if (wm_adsp_fw[dsp->fw].compr_direction != stream->direction) {
 		adsp_err(dsp, "%s: Firmware does not support stream direction\n",
-			 rtd->codec_dai->name);
+			 asoc_rtd_to_codec(rtd, 0)->name);
 		ret = -EINVAL;
 		goto out;
 	}
 
 	list_for_each_entry(tmp, &dsp->compr_list, list) {
-		if (!strcmp(tmp->name, rtd->codec_dai->name)) {
+		if (!strcmp(tmp->name, asoc_rtd_to_codec(rtd, 0)->name)) {
 			adsp_err(dsp, "%s: Only a single stream supported per dai\n",
-				 rtd->codec_dai->name);
+				 asoc_rtd_to_codec(rtd, 0)->name);
 			ret = -EBUSY;
 			goto out;
 		}
@@ -3496,7 +3496,7 @@ int wm_adsp_compr_open(struct wm_adsp *dsp, struct snd_compr_stream *stream)
 
 	compr->dsp = dsp;
 	compr->stream = stream;
-	compr->name = rtd->codec_dai->name;
+	compr->name = asoc_rtd_to_codec(rtd, 0)->name;
 
 	list_add_tail(&compr->list, &dsp->compr_list);
 
diff --git a/sound/soc/codecs/wsa881x.c b/sound/soc/codecs/wsa881x.c
index b59f1d0..f2d6f2f 100644
--- a/sound/soc/codecs/wsa881x.c
+++ b/sound/soc/codecs/wsa881x.c
@@ -676,7 +676,6 @@ struct wsa881x_priv {
 	int active_ports;
 	bool port_prepared[WSA881X_MAX_SWR_PORTS];
 	bool port_enable[WSA881X_MAX_SWR_PORTS];
-	bool stream_prepared;
 };
 
 static void wsa881x_init(struct wsa881x_priv *wsa881x)
@@ -954,41 +953,6 @@ static const struct snd_soc_dapm_widget wsa881x_dapm_widgets[] = {
 	SND_SOC_DAPM_OUTPUT("SPKR"),
 };
 
-static int wsa881x_prepare(struct snd_pcm_substream *substream,
-			   struct snd_soc_dai *dai)
-{
-	struct wsa881x_priv *wsa881x = dev_get_drvdata(dai->dev);
-	int ret;
-
-	if (wsa881x->stream_prepared) {
-		sdw_disable_stream(wsa881x->sruntime);
-		sdw_deprepare_stream(wsa881x->sruntime);
-		wsa881x->stream_prepared = false;
-	}
-
-
-	ret = sdw_prepare_stream(wsa881x->sruntime);
-	if (ret)
-		return ret;
-
-	/**
-	 * NOTE: there is a strict hw requirement about the ordering of port
-	 * enables and actual PA enable. PA enable should only happen after
-	 * soundwire ports are enabled if not DC on the line is accumulated
-	 * resulting in Click/Pop Noise
-	 * PA enable/mute are handled as part of DAPM and digital mute.
-	 */
-
-	ret = sdw_enable_stream(wsa881x->sruntime);
-	if (ret) {
-		sdw_deprepare_stream(wsa881x->sruntime);
-		return ret;
-	}
-	wsa881x->stream_prepared = true;
-
-	return ret;
-}
-
 static int wsa881x_hw_params(struct snd_pcm_substream *substream,
 			     struct snd_pcm_hw_params *params,
 			     struct snd_soc_dai *dai)
@@ -1016,12 +980,7 @@ static int wsa881x_hw_free(struct snd_pcm_substream *substream,
 {
 	struct wsa881x_priv *wsa881x = dev_get_drvdata(dai->dev);
 
-	if (wsa881x->stream_prepared) {
-		sdw_disable_stream(wsa881x->sruntime);
-		sdw_deprepare_stream(wsa881x->sruntime);
-		sdw_stream_remove_slave(wsa881x->slave, wsa881x->sruntime);
-		wsa881x->stream_prepared = false;
-	}
+	sdw_stream_remove_slave(wsa881x->slave, wsa881x->sruntime);
 
 	return 0;
 }
@@ -1052,7 +1011,6 @@ static int wsa881x_digital_mute(struct snd_soc_dai *dai, int mute, int stream)
 
 static struct snd_soc_dai_ops wsa881x_dai_ops = {
 	.hw_params = wsa881x_hw_params,
-	.prepare = wsa881x_prepare,
 	.hw_free = wsa881x_hw_free,
 	.mute_stream = wsa881x_digital_mute,
 	.set_sdw_stream = wsa881x_set_sdw_stream,
@@ -1150,7 +1108,7 @@ static int wsa881x_probe(struct sdw_slave *pdev,
 	wsa881x->sconfig.type = SDW_STREAM_PDM;
 	pdev->prop.sink_ports = GENMASK(WSA881X_MAX_SWR_PORTS, 0);
 	pdev->prop.sink_dpn_prop = wsa_sink_dpn_prop;
-	gpiod_set_value(wsa881x->sd_n, 1);
+	gpiod_direction_output(wsa881x->sd_n, 1);
 
 	wsa881x->regmap = devm_regmap_init_sdw(pdev, &wsa881x_regmap_config);
 	if (IS_ERR(wsa881x->regmap)) {
diff --git a/sound/soc/dwc/dwc-i2s.c b/sound/soc/dwc/dwc-i2s.c
index 7eeca21..515f884 100644
--- a/sound/soc/dwc/dwc-i2s.c
+++ b/sound/soc/dwc/dwc-i2s.c
@@ -422,15 +422,15 @@ static int dw_i2s_resume(struct snd_soc_component *component)
 {
 	struct dw_i2s_dev *dev = snd_soc_component_get_drvdata(component);
 	struct snd_soc_dai *dai;
+	int stream;
 
 	if (dev->capability & DW_I2S_MASTER)
 		clk_enable(dev->clk);
 
 	for_each_component_dais(component, dai) {
-		if (dai->playback_active)
-			dw_i2s_config(dev, SNDRV_PCM_STREAM_PLAYBACK);
-		if (dai->capture_active)
-			dw_i2s_config(dev, SNDRV_PCM_STREAM_CAPTURE);
+		for_each_pcm_streams(stream)
+			if (dai->stream_active[stream])
+				dw_i2s_config(dev, stream);
 	}
 
 	return 0;
diff --git a/sound/soc/dwc/dwc-pcm.c b/sound/soc/dwc/dwc-pcm.c
index 4b25aca..9868e73 100644
--- a/sound/soc/dwc/dwc-pcm.c
+++ b/sound/soc/dwc/dwc-pcm.c
@@ -140,7 +140,7 @@ static int dw_pcm_open(struct snd_soc_component *component,
 {
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct dw_i2s_dev *dev = snd_soc_dai_get_drvdata(rtd->cpu_dai);
+	struct dw_i2s_dev *dev = snd_soc_dai_get_drvdata(asoc_rtd_to_cpu(rtd, 0));
 
 	snd_soc_set_runtime_hwparams(substream, &dw_pcm_hardware);
 	snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS);
diff --git a/sound/soc/fsl/eukrea-tlv320.c b/sound/soc/fsl/eukrea-tlv320.c
index 6f3b768..4ff2d21 100644
--- a/sound/soc/fsl/eukrea-tlv320.c
+++ b/sound/soc/fsl/eukrea-tlv320.c
@@ -31,8 +31,8 @@ static int eukrea_tlv320_hw_params(struct snd_pcm_substream *substream,
 			    struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	int ret;
 
 	ret = snd_soc_dai_set_sysclk(codec_dai, 0,
diff --git a/sound/soc/fsl/fsl-asoc-card.c b/sound/soc/fsl/fsl-asoc-card.c
index 9ce55fe..bb33601f 100644
--- a/sound/soc/fsl/fsl-asoc-card.c
+++ b/sound/soc/fsl/fsl-asoc-card.c
@@ -159,7 +159,7 @@ static int fsl_asoc_card_hw_params(struct snd_pcm_substream *substream,
 		return 0;
 
 	/* Specific configurations of DAIs starts from here */
-	ret = snd_soc_dai_set_sysclk(rtd->cpu_dai, cpu_priv->sysclk_id[tx],
+	ret = snd_soc_dai_set_sysclk(asoc_rtd_to_cpu(rtd, 0), cpu_priv->sysclk_id[tx],
 				     cpu_priv->sysclk_freq[tx],
 				     cpu_priv->sysclk_dir[tx]);
 	if (ret && ret != -ENOTSUPP) {
@@ -168,7 +168,7 @@ static int fsl_asoc_card_hw_params(struct snd_pcm_substream *substream,
 	}
 
 	if (cpu_priv->slot_width) {
-		ret = snd_soc_dai_set_tdm_slot(rtd->cpu_dai, 0x3, 0x3, 2,
+		ret = snd_soc_dai_set_tdm_slot(asoc_rtd_to_cpu(rtd, 0), 0x3, 0x3, 2,
 					       cpu_priv->slot_width);
 		if (ret && ret != -ENOTSUPP) {
 			dev_err(dev, "failed to set TDM slot for cpu dai\n");
@@ -257,7 +257,7 @@ static int fsl_asoc_card_set_bias_level(struct snd_soc_card *card,
 	int ret;
 
 	rtd = snd_soc_get_pcm_runtime(card, &card->dai_link[0]);
-	codec_dai = rtd->codec_dai;
+	codec_dai = asoc_rtd_to_codec(rtd, 0);
 	if (dapm->dev != codec_dai->dev)
 		return 0;
 
@@ -446,14 +446,14 @@ static int fsl_asoc_card_late_probe(struct snd_soc_card *card)
 	struct fsl_asoc_card_priv *priv = snd_soc_card_get_drvdata(card);
 	struct snd_soc_pcm_runtime *rtd = list_first_entry(
 			&card->rtd_list, struct snd_soc_pcm_runtime, list);
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	struct codec_priv *codec_priv = &priv->codec_priv;
 	struct device *dev = card->dev;
 	int ret;
 
 	if (fsl_asoc_card_is_ac97(priv)) {
 #if IS_ENABLED(CONFIG_SND_AC97_CODEC)
-		struct snd_soc_component *component = rtd->codec_dai->component;
+		struct snd_soc_component *component = asoc_rtd_to_codec(rtd, 0)->component;
 		struct snd_ac97 *ac97 = snd_soc_component_get_drvdata(component);
 
 		/*
diff --git a/sound/soc/fsl/fsl_asrc_dma.c b/sound/soc/fsl/fsl_asrc_dma.c
index ece130f..e717881 100644
--- a/sound/soc/fsl/fsl_asrc_dma.c
+++ b/sound/soc/fsl/fsl_asrc_dma.c
@@ -152,7 +152,7 @@ static int fsl_asrc_dma_hw_params(struct snd_soc_component *component,
 	for_each_dpcm_be(rtd, stream, dpcm) {
 		struct snd_soc_pcm_runtime *be = dpcm->be;
 		struct snd_pcm_substream *substream_be;
-		struct snd_soc_dai *dai = be->cpu_dai;
+		struct snd_soc_dai *dai = asoc_rtd_to_cpu(be, 0);
 
 		if (dpcm->fe != rtd)
 			continue;
@@ -169,7 +169,7 @@ static int fsl_asrc_dma_hw_params(struct snd_soc_component *component,
 	}
 
 	/* Override dma_data of the Front-End and config its dmaengine */
-	dma_params_fe = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+	dma_params_fe = snd_soc_dai_get_dma_data(asoc_rtd_to_cpu(rtd, 0), substream);
 	dma_params_fe->addr = asrc_priv->paddr + REG_ASRDx(!dir, index);
 	dma_params_fe->maxburst = dma_params_be->maxburst;
 
@@ -328,7 +328,7 @@ static int fsl_asrc_dma_startup(struct snd_soc_component *component,
 		goto dma_chan_err;
 	}
 
-	dma_data = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+	dma_data = snd_soc_dai_get_dma_data(asoc_rtd_to_cpu(rtd, 0), substream);
 
 	/* Refine the snd_imx_hardware according to caps of DMA. */
 	ret = snd_dmaengine_pcm_refine_runtime_hwparams(substream,
@@ -400,7 +400,7 @@ static int fsl_asrc_dma_pcm_new(struct snd_soc_component *component,
 		return ret;
 	}
 
-	for (i = SNDRV_PCM_STREAM_PLAYBACK; i <= SNDRV_PCM_STREAM_LAST; i++) {
+	for_each_pcm_streams(i) {
 		substream = pcm->streams[i].substream;
 		if (!substream)
 			continue;
@@ -428,7 +428,7 @@ static void fsl_asrc_dma_pcm_free(struct snd_soc_component *component,
 	struct snd_pcm_substream *substream;
 	int i;
 
-	for (i = SNDRV_PCM_STREAM_PLAYBACK; i <= SNDRV_PCM_STREAM_LAST; i++) {
+	for_each_pcm_streams(i) {
 		substream = pcm->streams[i].substream;
 		if (!substream)
 			continue;
diff --git a/sound/soc/fsl/fsl_spdif.c b/sound/soc/fsl/fsl_spdif.c
index 7858a54..c711d2d 100644
--- a/sound/soc/fsl/fsl_spdif.c
+++ b/sound/soc/fsl/fsl_spdif.c
@@ -370,7 +370,7 @@ static int spdif_set_sample_rate(struct snd_pcm_substream *substream,
 				int sample_rate)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(rtd->cpu_dai);
+	struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(asoc_rtd_to_cpu(rtd, 0));
 	struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control;
 	struct regmap *regmap = spdif_priv->regmap;
 	struct platform_device *pdev = spdif_priv->pdev;
@@ -458,7 +458,7 @@ static int fsl_spdif_startup(struct snd_pcm_substream *substream,
 			     struct snd_soc_dai *cpu_dai)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(rtd->cpu_dai);
+	struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(asoc_rtd_to_cpu(rtd, 0));
 	struct platform_device *pdev = spdif_priv->pdev;
 	struct regmap *regmap = spdif_priv->regmap;
 	u32 scr, mask;
@@ -534,7 +534,7 @@ static void fsl_spdif_shutdown(struct snd_pcm_substream *substream,
 				struct snd_soc_dai *cpu_dai)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(rtd->cpu_dai);
+	struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(asoc_rtd_to_cpu(rtd, 0));
 	struct regmap *regmap = spdif_priv->regmap;
 	u32 scr, mask, i;
 
@@ -569,7 +569,7 @@ static int fsl_spdif_hw_params(struct snd_pcm_substream *substream,
 				struct snd_soc_dai *dai)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(rtd->cpu_dai);
+	struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(asoc_rtd_to_cpu(rtd, 0));
 	struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control;
 	struct platform_device *pdev = spdif_priv->pdev;
 	u32 sample_rate = params_rate(params);
@@ -597,7 +597,7 @@ static int fsl_spdif_trigger(struct snd_pcm_substream *substream,
 				int cmd, struct snd_soc_dai *dai)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(rtd->cpu_dai);
+	struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(asoc_rtd_to_cpu(rtd, 0));
 	struct regmap *regmap = spdif_priv->regmap;
 	bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
 	u32 intr = SIE_INTR_FOR(tx);
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 5c97269..bad89b0 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -631,7 +631,7 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream,
 			   struct snd_soc_dai *dai)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct fsl_ssi *ssi = snd_soc_dai_get_drvdata(rtd->cpu_dai);
+	struct fsl_ssi *ssi = snd_soc_dai_get_drvdata(asoc_rtd_to_cpu(rtd, 0));
 	int ret;
 
 	ret = clk_prepare_enable(ssi->clk);
@@ -655,7 +655,7 @@ static void fsl_ssi_shutdown(struct snd_pcm_substream *substream,
 			     struct snd_soc_dai *dai)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct fsl_ssi *ssi = snd_soc_dai_get_drvdata(rtd->cpu_dai);
+	struct fsl_ssi *ssi = snd_soc_dai_get_drvdata(asoc_rtd_to_cpu(rtd, 0));
 
 	clk_disable_unprepare(ssi->clk);
 }
@@ -854,7 +854,7 @@ static int fsl_ssi_hw_free(struct snd_pcm_substream *substream,
 			   struct snd_soc_dai *dai)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct fsl_ssi *ssi = snd_soc_dai_get_drvdata(rtd->cpu_dai);
+	struct fsl_ssi *ssi = snd_soc_dai_get_drvdata(asoc_rtd_to_cpu(rtd, 0));
 
 	if (fsl_ssi_is_i2s_master(ssi) &&
 	    ssi->baudclk_streams & BIT(substream->stream)) {
@@ -1059,7 +1059,7 @@ static int fsl_ssi_trigger(struct snd_pcm_substream *substream, int cmd,
 			   struct snd_soc_dai *dai)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct fsl_ssi *ssi = snd_soc_dai_get_drvdata(rtd->cpu_dai);
+	struct fsl_ssi *ssi = snd_soc_dai_get_drvdata(asoc_rtd_to_cpu(rtd, 0));
 	bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
 
 	switch (cmd) {
diff --git a/sound/soc/fsl/imx-audmix.c b/sound/soc/fsl/imx-audmix.c
index 5ef6881..e09b45d 100644
--- a/sound/soc/fsl/imx-audmix.c
+++ b/sound/soc/fsl/imx-audmix.c
@@ -85,13 +85,13 @@ static int imx_audmix_fe_hw_params(struct snd_pcm_substream *substream,
 	dir  = tx ? SND_SOC_CLOCK_OUT : SND_SOC_CLOCK_IN;
 
 	/* set DAI configuration */
-	ret = snd_soc_dai_set_fmt(rtd->cpu_dai, fmt);
+	ret = snd_soc_dai_set_fmt(asoc_rtd_to_cpu(rtd, 0), fmt);
 	if (ret) {
 		dev_err(dev, "failed to set cpu dai fmt: %d\n", ret);
 		return ret;
 	}
 
-	ret = snd_soc_dai_set_sysclk(rtd->cpu_dai, FSL_SAI_CLK_MAST1, 0, dir);
+	ret = snd_soc_dai_set_sysclk(asoc_rtd_to_cpu(rtd, 0), FSL_SAI_CLK_MAST1, 0, dir);
 	if (ret) {
 		dev_err(dev, "failed to set cpu sysclk: %d\n", ret);
 		return ret;
@@ -101,7 +101,7 @@ static int imx_audmix_fe_hw_params(struct snd_pcm_substream *substream,
 	 * Per datasheet, AUDMIX expects 8 slots and 32 bits
 	 * for every slot in TDM mode.
 	 */
-	ret = snd_soc_dai_set_tdm_slot(rtd->cpu_dai, BIT(channels) - 1,
+	ret = snd_soc_dai_set_tdm_slot(asoc_rtd_to_cpu(rtd, 0), BIT(channels) - 1,
 				       BIT(channels) - 1, 8, 32);
 	if (ret)
 		dev_err(dev, "failed to set cpu dai tdm slot: %d\n", ret);
@@ -125,7 +125,7 @@ static int imx_audmix_be_hw_params(struct snd_pcm_substream *substream,
 	fmt |= SND_SOC_DAIFMT_CBM_CFM;
 
 	/* set AUDMIX DAI configuration */
-	ret = snd_soc_dai_set_fmt(rtd->cpu_dai, fmt);
+	ret = snd_soc_dai_set_fmt(asoc_rtd_to_cpu(rtd, 0), fmt);
 	if (ret)
 		dev_err(dev, "failed to set AUDMIX DAI fmt: %d\n", ret);
 
diff --git a/sound/soc/fsl/imx-mc13783.c b/sound/soc/fsl/imx-mc13783.c
index 2b67968..fab2d6c 100644
--- a/sound/soc/fsl/imx-mc13783.c
+++ b/sound/soc/fsl/imx-mc13783.c
@@ -27,8 +27,8 @@ static int imx_mc13783_hifi_hw_params(struct snd_pcm_substream *substream,
 	struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	int ret;
 
 	ret = snd_soc_dai_set_tdm_slot(codec_dai, 0x3, 0x3, 4, 16);
diff --git a/sound/soc/fsl/imx-sgtl5000.c b/sound/soc/fsl/imx-sgtl5000.c
index 15e8b93..f45cb4b 100644
--- a/sound/soc/fsl/imx-sgtl5000.c
+++ b/sound/soc/fsl/imx-sgtl5000.c
@@ -30,7 +30,7 @@ static int imx_sgtl5000_dai_init(struct snd_soc_pcm_runtime *rtd)
 	struct device *dev = rtd->card->dev;
 	int ret;
 
-	ret = snd_soc_dai_set_sysclk(rtd->codec_dai, SGTL5000_SYSCLK,
+	ret = snd_soc_dai_set_sysclk(asoc_rtd_to_codec(rtd, 0), SGTL5000_SYSCLK,
 				     data->clk_frequency, SND_SOC_CLOCK_IN);
 	if (ret) {
 		dev_err(dev, "could not set codec driver clock params\n");
diff --git a/sound/soc/fsl/mpc5200_dma.c b/sound/soc/fsl/mpc5200_dma.c
index ed7211d..3b8c796 100644
--- a/sound/soc/fsl/mpc5200_dma.c
+++ b/sound/soc/fsl/mpc5200_dma.c
@@ -115,7 +115,7 @@ static int psc_dma_trigger(struct snd_soc_component *component,
 			   struct snd_pcm_substream *substream, int cmd)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct psc_dma *psc_dma = snd_soc_dai_get_drvdata(rtd->cpu_dai);
+	struct psc_dma *psc_dma = snd_soc_dai_get_drvdata(asoc_rtd_to_cpu(rtd, 0));
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct psc_dma_stream *s = to_psc_dma_stream(substream, psc_dma);
 	struct mpc52xx_psc __iomem *regs = psc_dma->psc_regs;
@@ -217,7 +217,7 @@ static int psc_dma_open(struct snd_soc_component *component,
 {
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct psc_dma *psc_dma = snd_soc_dai_get_drvdata(rtd->cpu_dai);
+	struct psc_dma *psc_dma = snd_soc_dai_get_drvdata(asoc_rtd_to_cpu(rtd, 0));
 	struct psc_dma_stream *s;
 	int rc;
 
@@ -245,7 +245,7 @@ static int psc_dma_close(struct snd_soc_component *component,
 			 struct snd_pcm_substream *substream)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct psc_dma *psc_dma = snd_soc_dai_get_drvdata(rtd->cpu_dai);
+	struct psc_dma *psc_dma = snd_soc_dai_get_drvdata(asoc_rtd_to_cpu(rtd, 0));
 	struct psc_dma_stream *s;
 
 	dev_dbg(psc_dma->dev, "psc_dma_close(substream=%p)\n", substream);
@@ -271,7 +271,7 @@ psc_dma_pointer(struct snd_soc_component *component,
 		struct snd_pcm_substream *substream)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct psc_dma *psc_dma = snd_soc_dai_get_drvdata(rtd->cpu_dai);
+	struct psc_dma *psc_dma = snd_soc_dai_get_drvdata(asoc_rtd_to_cpu(rtd, 0));
 	struct psc_dma_stream *s;
 	dma_addr_t count;
 
@@ -298,7 +298,7 @@ static int psc_dma_new(struct snd_soc_component *component,
 		       struct snd_soc_pcm_runtime *rtd)
 {
 	struct snd_card *card = rtd->card->snd_card;
-	struct snd_soc_dai *dai = rtd->cpu_dai;
+	struct snd_soc_dai *dai = asoc_rtd_to_cpu(rtd, 0);
 	struct snd_pcm *pcm = rtd->pcm;
 	size_t size = psc_dma_hardware.buffer_bytes_max;
 	int rc;
diff --git a/sound/soc/fsl/mpc5200_psc_i2s.c b/sound/soc/fsl/mpc5200_psc_i2s.c
index 9bc01f3..1ab4fbd 100644
--- a/sound/soc/fsl/mpc5200_psc_i2s.c
+++ b/sound/soc/fsl/mpc5200_psc_i2s.c
@@ -39,7 +39,7 @@ static int psc_i2s_hw_params(struct snd_pcm_substream *substream,
 				 struct snd_soc_dai *dai)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct psc_dma *psc_dma = snd_soc_dai_get_drvdata(rtd->cpu_dai);
+	struct psc_dma *psc_dma = snd_soc_dai_get_drvdata(asoc_rtd_to_cpu(rtd, 0));
 	u32 mode;
 
 	dev_dbg(psc_dma->dev, "%s(substream=%p) p_size=%i p_bytes=%i"
diff --git a/sound/soc/fsl/mpc8610_hpcd.c b/sound/soc/fsl/mpc8610_hpcd.c
index 23617eb..f7bd900 100644
--- a/sound/soc/fsl/mpc8610_hpcd.c
+++ b/sound/soc/fsl/mpc8610_hpcd.c
@@ -105,7 +105,7 @@ static int mpc8610_hpcd_startup(struct snd_pcm_substream *substream)
 	int ret = 0;
 
 	/* Tell the codec driver what the serial protocol is. */
-	ret = snd_soc_dai_set_fmt(rtd->codec_dai, machine_data->dai_format);
+	ret = snd_soc_dai_set_fmt(asoc_rtd_to_codec(rtd, 0), machine_data->dai_format);
 	if (ret < 0) {
 		dev_err(dev, "could not set codec driver audio format\n");
 		return ret;
@@ -115,7 +115,7 @@ static int mpc8610_hpcd_startup(struct snd_pcm_substream *substream)
 	 * Tell the codec driver what the MCLK frequency is, and whether it's
 	 * a slave or master.
 	 */
-	ret = snd_soc_dai_set_sysclk(rtd->codec_dai, 0,
+	ret = snd_soc_dai_set_sysclk(asoc_rtd_to_codec(rtd, 0), 0,
 				     machine_data->clk_frequency,
 				     machine_data->codec_clk_direction);
 	if (ret < 0) {
diff --git a/sound/soc/fsl/mx27vis-aic32x4.c b/sound/soc/fsl/mx27vis-aic32x4.c
index 38ac4a3..a36d4e8 100644
--- a/sound/soc/fsl/mx27vis-aic32x4.c
+++ b/sound/soc/fsl/mx27vis-aic32x4.c
@@ -37,8 +37,8 @@ static int mx27vis_aic32x4_hw_params(struct snd_pcm_substream *substream,
 			    struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	int ret;
 
 	ret = snd_soc_dai_set_sysclk(codec_dai, 0,
diff --git a/sound/soc/fsl/p1022_ds.c b/sound/soc/fsl/p1022_ds.c
index 6114b01..fe30915 100644
--- a/sound/soc/fsl/p1022_ds.c
+++ b/sound/soc/fsl/p1022_ds.c
@@ -128,7 +128,7 @@ static int p1022_ds_startup(struct snd_pcm_substream *substream)
 	int ret = 0;
 
 	/* Tell the codec driver what the serial protocol is. */
-	ret = snd_soc_dai_set_fmt(rtd->codec_dai, mdata->dai_format);
+	ret = snd_soc_dai_set_fmt(asoc_rtd_to_codec(rtd, 0), mdata->dai_format);
 	if (ret < 0) {
 		dev_err(dev, "could not set codec driver audio format\n");
 		return ret;
@@ -138,7 +138,7 @@ static int p1022_ds_startup(struct snd_pcm_substream *substream)
 	 * Tell the codec driver what the MCLK frequency is, and whether it's
 	 * a slave or master.
 	 */
-	ret = snd_soc_dai_set_sysclk(rtd->codec_dai, 0, mdata->clk_frequency,
+	ret = snd_soc_dai_set_sysclk(asoc_rtd_to_codec(rtd, 0), 0, mdata->clk_frequency,
 				     mdata->codec_clk_direction);
 	if (ret < 0) {
 		dev_err(dev, "could not set codec driver clock params\n");
diff --git a/sound/soc/fsl/p1022_rdk.c b/sound/soc/fsl/p1022_rdk.c
index 7268723..f5374fe 100644
--- a/sound/soc/fsl/p1022_rdk.c
+++ b/sound/soc/fsl/p1022_rdk.c
@@ -134,14 +134,14 @@ static int p1022_rdk_startup(struct snd_pcm_substream *substream)
 	int ret = 0;
 
 	/* Tell the codec driver what the serial protocol is. */
-	ret = snd_soc_dai_set_fmt(rtd->codec_dai, mdata->dai_format);
+	ret = snd_soc_dai_set_fmt(asoc_rtd_to_codec(rtd, 0), mdata->dai_format);
 	if (ret < 0) {
 		dev_err(dev, "could not set codec driver audio format (ret=%i)\n",
 			ret);
 		return ret;
 	}
 
-	ret = snd_soc_dai_set_pll(rtd->codec_dai, 0, 0, mdata->clk_frequency,
+	ret = snd_soc_dai_set_pll(asoc_rtd_to_codec(rtd, 0), 0, 0, mdata->clk_frequency,
 		mdata->clk_frequency);
 	if (ret < 0) {
 		dev_err(dev, "could not set codec PLL frequency (ret=%i)\n",
diff --git a/sound/soc/fsl/wm1133-ev1.c b/sound/soc/fsl/wm1133-ev1.c
index 52d321b..8b1551c 100644
--- a/sound/soc/fsl/wm1133-ev1.c
+++ b/sound/soc/fsl/wm1133-ev1.c
@@ -76,8 +76,8 @@ static int wm1133_ev1_hw_params(struct snd_pcm_substream *substream,
 				struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	int i, found = 0;
 	snd_pcm_format_t format = params_format(params);
 	unsigned int rate = params_rate(params);
@@ -196,7 +196,7 @@ static struct snd_soc_jack_pin mic_jack_pins[] = {
 
 static int wm1133_ev1_init(struct snd_soc_pcm_runtime *rtd)
 {
-	struct snd_soc_component *component = rtd->codec_dai->component;
+	struct snd_soc_component *component = asoc_rtd_to_codec(rtd, 0)->component;
 
 	/* Headphone jack detection */
 	snd_soc_card_jack_new(rtd->card, "Headphone", SND_JACK_HEADPHONE,
diff --git a/sound/soc/generic/simple-card-utils.c b/sound/soc/generic/simple-card-utils.c
index 9b79477..8c54dc6 100644
--- a/sound/soc/generic/simple-card-utils.c
+++ b/sound/soc/generic/simple-card-utils.c
@@ -213,8 +213,8 @@ EXPORT_SYMBOL_GPL(asoc_simple_startup);
 void asoc_simple_shutdown(struct snd_pcm_substream *substream)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	struct asoc_simple_priv *priv = snd_soc_card_get_drvdata(rtd->card);
 	struct simple_dai_props *dai_props =
 		simple_priv_to_props(priv, rtd->num);
@@ -249,8 +249,8 @@ int asoc_simple_hw_params(struct snd_pcm_substream *substream,
 			  struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	struct asoc_simple_priv *priv = snd_soc_card_get_drvdata(rtd->card);
 	struct simple_dai_props *dai_props =
 		simple_priv_to_props(priv, rtd->num);
@@ -331,22 +331,70 @@ static int asoc_simple_init_dai(struct snd_soc_dai *dai,
 	return 0;
 }
 
+static int asoc_simple_init_dai_link_params(struct snd_soc_pcm_runtime *rtd,
+					    struct simple_dai_props *dai_props)
+{
+	struct snd_soc_dai_link *dai_link = rtd->dai_link;
+	struct snd_soc_component *component;
+	struct snd_soc_pcm_stream *params;
+	struct snd_pcm_hardware hw;
+	int i, ret, stream;
+
+	/* Only codecs should have non_legacy_dai_naming set. */
+	for_each_rtd_components(rtd, i, component) {
+		if (!component->driver->non_legacy_dai_naming)
+			return 0;
+	}
+
+	/* Assumes the capabilities are the same for all supported streams */
+	for_each_pcm_streams(stream) {
+		ret = snd_soc_runtime_calc_hw(rtd, &hw, stream);
+		if (ret == 0)
+			break;
+	}
+
+	if (ret < 0) {
+		dev_err(rtd->dev, "simple-card: no valid dai_link params\n");
+		return ret;
+	}
+
+	params = devm_kzalloc(rtd->dev, sizeof(*params), GFP_KERNEL);
+	if (!params)
+		return -ENOMEM;
+
+	params->formats = hw.formats;
+	params->rates = hw.rates;
+	params->rate_min = hw.rate_min;
+	params->rate_max = hw.rate_max;
+	params->channels_min = hw.channels_min;
+	params->channels_max = hw.channels_max;
+
+	dai_link->params = params;
+	dai_link->num_params = 1;
+
+	return 0;
+}
+
 int asoc_simple_dai_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct asoc_simple_priv *priv = snd_soc_card_get_drvdata(rtd->card);
 	struct simple_dai_props *dai_props = simple_priv_to_props(priv, rtd->num);
 	int ret;
 
-	ret = asoc_simple_init_dai(rtd->codec_dai,
+	ret = asoc_simple_init_dai(asoc_rtd_to_codec(rtd, 0),
 				   dai_props->codec_dai);
 	if (ret < 0)
 		return ret;
 
-	ret = asoc_simple_init_dai(rtd->cpu_dai,
+	ret = asoc_simple_init_dai(asoc_rtd_to_cpu(rtd, 0),
 				   dai_props->cpu_dai);
 	if (ret < 0)
 		return ret;
 
+	ret = asoc_simple_init_dai_link_params(rtd, dai_props);
+	if (ret < 0)
+		return ret;
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(asoc_simple_dai_init);
diff --git a/sound/soc/img/img-i2s-in.c b/sound/soc/img/img-i2s-in.c
index fdd2c73..a495d10 100644
--- a/sound/soc/img/img-i2s-in.c
+++ b/sound/soc/img/img-i2s-in.c
@@ -397,7 +397,7 @@ static int img_i2s_in_dma_prepare_slave_config(struct snd_pcm_substream *st,
 	struct snd_dmaengine_dai_dma_data *dma_data;
 	int ret;
 
-	dma_data = snd_soc_dai_get_dma_data(rtd->cpu_dai, st);
+	dma_data = snd_soc_dai_get_dma_data(asoc_rtd_to_cpu(rtd, 0), st);
 
 	ret = snd_hwparams_to_dma_slave_config(st, params, sc);
 	if (ret)
diff --git a/sound/soc/img/img-i2s-out.c b/sound/soc/img/img-i2s-out.c
index 4b185340..db052ec 100644
--- a/sound/soc/img/img-i2s-out.c
+++ b/sound/soc/img/img-i2s-out.c
@@ -403,7 +403,7 @@ static int img_i2s_out_dma_prepare_slave_config(struct snd_pcm_substream *st,
 	struct snd_dmaengine_dai_dma_data *dma_data;
 	int ret;
 
-	dma_data = snd_soc_dai_get_dma_data(rtd->cpu_dai, st);
+	dma_data = snd_soc_dai_get_dma_data(asoc_rtd_to_cpu(rtd, 0), st);
 
 	ret = snd_hwparams_to_dma_slave_config(st, params, sc);
 	if (ret)
diff --git a/sound/soc/intel/atom/sst-atom-controls.c b/sound/soc/intel/atom/sst-atom-controls.c
index baef461..69f3af4 100644
--- a/sound/soc/intel/atom/sst-atom-controls.c
+++ b/sound/soc/intel/atom/sst-atom-controls.c
@@ -50,6 +50,8 @@ static int sst_fill_and_send_cmd_unlocked(struct sst_data *drv,
 {
 	int ret = 0;
 
+	WARN_ON(!mutex_is_locked(&drv->lock));
+
 	ret = sst_fill_byte_control(drv, ipc_msg,
 				block, task_id, pipe_id, len, cmd_data);
 	if (ret < 0)
@@ -966,7 +968,9 @@ static int sst_set_be_modules(struct snd_soc_dapm_widget *w,
 	dev_dbg(c->dev, "Enter: widget=%s\n", w->name);
 
 	if (SND_SOC_DAPM_EVENT_ON(event)) {
+		mutex_lock(&drv->lock);
 		ret = sst_send_slot_map(drv);
+		mutex_unlock(&drv->lock);
 		if (ret)
 			return ret;
 		ret = sst_send_pipe_module_params(w, k);
@@ -1333,7 +1337,7 @@ int sst_send_pipe_gains(struct snd_soc_dai *dai, int stream, int mute)
 				dai->capture_widget->name);
 		w = dai->capture_widget;
 		snd_soc_dapm_widget_for_each_source_path(w, p) {
-			if (p->connected && !p->connected(w, p->sink))
+			if (p->connected && !p->connected(w, p->source))
 				continue;
 
 			if (p->connect &&  p->source->power &&
diff --git a/sound/soc/intel/atom/sst-mfld-platform-pcm.c b/sound/soc/intel/atom/sst-mfld-platform-pcm.c
index 340bd2b..82f2b63 100644
--- a/sound/soc/intel/atom/sst-mfld-platform-pcm.c
+++ b/sound/soc/intel/atom/sst-mfld-platform-pcm.c
@@ -649,7 +649,7 @@ static snd_pcm_uframes_t sst_soc_pointer(struct snd_soc_component *component,
 static int sst_soc_pcm_new(struct snd_soc_component *component,
 			   struct snd_soc_pcm_runtime *rtd)
 {
-	struct snd_soc_dai *dai = rtd->cpu_dai;
+	struct snd_soc_dai *dai = asoc_rtd_to_cpu(rtd, 0);
 	struct snd_pcm *pcm = rtd->pcm;
 
 	if (dai->driver->playback.channels_min ||
@@ -741,7 +741,7 @@ static int sst_soc_prepare(struct device *dev)
 
 	/* set the SSPs to idle */
 	for_each_card_rtds(drv->soc_card, rtd) {
-		struct snd_soc_dai *dai = rtd->cpu_dai;
+		struct snd_soc_dai *dai = asoc_rtd_to_cpu(rtd, 0);
 
 		if (dai->active) {
 			send_ssp_cmd(dai, dai->name, 0);
@@ -762,7 +762,7 @@ static void sst_soc_complete(struct device *dev)
 
 	/* restart SSPs */
 	for_each_card_rtds(drv->soc_card, rtd) {
-		struct snd_soc_dai *dai = rtd->cpu_dai;
+		struct snd_soc_dai *dai = asoc_rtd_to_cpu(rtd, 0);
 
 		if (dai->active) {
 			sst_handle_vb_timer(dai, true);
diff --git a/sound/soc/intel/atom/sst/sst_pci.c b/sound/soc/intel/atom/sst/sst_pci.c
index d952719..5862fe9 100644
--- a/sound/soc/intel/atom/sst/sst_pci.c
+++ b/sound/soc/intel/atom/sst/sst_pci.c
@@ -99,7 +99,7 @@ static int sst_platform_get_resources(struct intel_sst_drv *ctx)
 	dev_dbg(ctx->dev, "DRAM Ptr %p\n", ctx->dram);
 do_release_regions:
 	pci_release_regions(pci);
-	return 0;
+	return ret;
 }
 
 /*
diff --git a/sound/soc/intel/atom/sst/sst_pvt.c b/sound/soc/intel/atom/sst/sst_pvt.c
index 13db285..053c277 100644
--- a/sound/soc/intel/atom/sst/sst_pvt.c
+++ b/sound/soc/intel/atom/sst/sst_pvt.c
@@ -223,9 +223,9 @@ int sst_prepare_and_post_msg(struct intel_sst_drv *sst,
 		size_t mbox_data_len, const void *mbox_data, void **data,
 		bool large, bool fill_dsp, bool sync, bool response)
 {
+	struct sst_block *block = NULL;
 	struct ipc_post *msg = NULL;
 	struct ipc_dsp_hdr dsp_hdr;
-	struct sst_block *block;
 	int ret = 0, pvt_id;
 
 	pvt_id = sst_assign_pvt_id(sst);
diff --git a/sound/soc/intel/boards/Kconfig b/sound/soc/intel/boards/Kconfig
index 9ca2567..556c310 100644
--- a/sound/soc/intel/boards/Kconfig
+++ b/sound/soc/intel/boards/Kconfig
@@ -289,7 +289,6 @@
 	select SND_SOC_DA7219
 	select SND_SOC_MAX98357A
 	select SND_SOC_DMIC
-	select SND_HDA_CODEC_HDMI if SND_SOC_SOF_HDA_AUDIO_CODEC
 	select SND_SOC_HDAC_HDMI
 
 config SND_SOC_INTEL_BXT_DA7219_MAX98357A_COMMON
@@ -302,6 +301,7 @@
 	tristate "Broxton with DA7219 and MAX98357A in I2S Mode"
 	depends on I2C && ACPI
 	depends on MFD_INTEL_LPSS || COMPILE_TEST
+	depends on SND_HDA_CODEC_HDMI
 	select SND_SOC_INTEL_BXT_DA7219_MAX98357A_COMMON
 	help
 	   This adds support for ASoC machine driver for Broxton-P platforms
@@ -402,6 +402,7 @@
 	tristate "GLK with DA7219 and MAX98357A in I2S Mode"
 	depends on I2C && ACPI
 	depends on MFD_INTEL_LPSS || COMPILE_TEST
+	depends on SND_HDA_CODEC_HDMI
 	select SND_SOC_INTEL_BXT_DA7219_MAX98357A_COMMON
 	help
 	   This adds support for ASoC machine driver for Geminilake platforms
@@ -413,10 +414,10 @@
 	tristate "GLK with RT5682 and MAX98357A in I2S Mode"
 	depends on I2C && ACPI
 	depends on MFD_INTEL_LPSS || COMPILE_TEST
+	depends on SND_HDA_CODEC_HDMI
 	select SND_SOC_RT5682
 	select SND_SOC_MAX98357A
 	select SND_SOC_DMIC
-	select SND_HDA_CODEC_HDMI if SND_SOC_SOF_HDA_AUDIO_CODEC
 	select SND_SOC_HDAC_HDMI
 	help
 	   This adds support for ASoC machine driver for Geminilake platforms
@@ -430,7 +431,7 @@
 
 config SND_SOC_INTEL_SKL_HDA_DSP_GENERIC_MACH
 	tristate "SKL/KBL/BXT/APL with HDA Codecs"
-	select SND_HDA_CODEC_HDMI if SND_SOC_SOF_HDA_AUDIO_CODEC
+	depends on SND_HDA_CODEC_HDMI
 	select SND_SOC_HDAC_HDMI
 	select SND_SOC_DMIC
 	# SND_SOC_HDAC_HDA is already selected
@@ -448,15 +449,31 @@
 	depends on I2C && ACPI
 	depends on (SND_SOC_SOF_HDA_LINK && (MFD_INTEL_LPSS || COMPILE_TEST)) ||\
 		   (SND_SOC_SOF_BAYTRAIL && (X86_INTEL_LPSS || COMPILE_TEST))
+	depends on SND_HDA_CODEC_HDMI
+	select SND_SOC_MAX98373
+	select SND_SOC_RT1015
 	select SND_SOC_RT5682
 	select SND_SOC_DMIC
-	select SND_HDA_CODEC_HDMI if SND_SOC_SOF_HDA_AUDIO_CODEC
 	select SND_SOC_HDAC_HDMI
 	help
 	   This adds support for ASoC machine driver for SOF platforms
 	   with rt5682 codec.
 	   Say Y if you have such a device.
 	   If unsure select "N".
+
+config SND_SOC_INTEL_SOF_PCM512x_MACH
+	tristate "SOF with TI PCM512x codec"
+	depends on I2C && ACPI
+	depends on (SND_SOC_SOF_HDA_AUDIO_CODEC && (MFD_INTEL_LPSS || COMPILE_TEST)) ||\
+		   (SND_SOC_SOF_BAYTRAIL && (X86_INTEL_LPSS || COMPILE_TEST))
+	depends on SND_HDA_CODEC_HDMI
+	select SND_SOC_PCM512x_I2C
+	help
+	  This adds support for ASoC machine driver for SOF platforms
+	  with TI PCM512x I2S audio codec.
+	  Say Y or m if you have such a device.
+	  If unsure select "N".
+
 endif ## SND_SOC_SOF_HDA_LINK || SND_SOC_SOF_BAYTRAIL
 
 if (SND_SOC_SOF_COMETLAKE_LP && SND_SOC_SOF_HDA_LINK)
@@ -476,11 +493,11 @@
 	tristate "CML with RT1011 and RT5682 in I2S Mode"
 	depends on I2C && ACPI
 	depends on MFD_INTEL_LPSS || COMPILE_TEST
+	depends on SND_HDA_CODEC_HDMI
 	select SND_SOC_RT1011
 	select SND_SOC_RT5682
 	select SND_SOC_DMIC
 	select SND_SOC_HDAC_HDMI
-	select SND_HDA_CODEC_HDMI if SND_SOC_SOF_HDA_AUDIO_CODEC
 	help
 	  This adds support for ASoC machine driver for SOF platform with
 	  RT1011 + RT5682 I2S codec.
@@ -492,19 +509,43 @@
 if SND_SOC_SOF_JASPERLAKE
 
 config SND_SOC_INTEL_SOF_DA7219_MAX98373_MACH
-	tristate "SOF with DA7219 and MAX98373 in I2S Mode"
+	tristate "SOF with DA7219 and MAX98373/MAX98360A in I2S Mode"
 	depends on I2C && ACPI
 	depends on MFD_INTEL_LPSS || COMPILE_TEST
+	depends on SND_HDA_CODEC_HDMI
 	select SND_SOC_DA7219
 	select SND_SOC_MAX98373
 	select SND_SOC_DMIC
-	select SND_HDA_CODEC_HDMI if SND_SOC_SOF_HDA_AUDIO_CODEC
 	help
 	  This adds support for ASoC machine driver for SOF platforms
-	  with DA7219 + MAX98373 I2S audio codec.
+	  with DA7219 + MAX98373/MAX98360A I2S audio codec.
 	  Say Y if you have such a device.
 	  If unsure select "N".
 
 endif ## SND_SOC_SOF_JASPERLAKE
 
+if SND_SOC_SOF_INTEL_SOUNDWIRE
+
+config SND_SOC_INTEL_SOUNDWIRE_SOF_MACH
+	tristate "SoundWire generic machine driver"
+	depends on I2C && ACPI
+	depends on MFD_INTEL_LPSS || COMPILE_TEST
+	depends on SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES || COMPILE_TEST
+	depends on SOUNDWIRE
+	depends on SND_HDA_CODEC_HDMI
+	select SND_SOC_RT700_SDW
+	select SND_SOC_RT711_SDW
+	select SND_SOC_RT1308_SDW
+	select SND_SOC_RT1308
+	select SND_SOC_RT715_SDW
+	select SND_SOC_RT5682_SDW
+	select SND_SOC_DMIC
+        help
+	  Add support for Intel SoundWire-based platforms connected to
+	  RT700, RT711, RT1308 and RT715
+	  If unsure select "N".
+
+endif
+
+
 endif ## SND_SOC_INTEL_MACH
diff --git a/sound/soc/intel/boards/Makefile b/sound/soc/intel/boards/Makefile
index b74ddd4..1ef6e60 100644
--- a/sound/soc/intel/boards/Makefile
+++ b/sound/soc/intel/boards/Makefile
@@ -7,6 +7,7 @@
 snd-soc-sst-broadwell-objs := broadwell.o
 snd-soc-sst-bxt-da7219_max98357a-objs := bxt_da7219_max98357a.o hda_dsp_common.o
 snd-soc-sst-bxt-rt298-objs := bxt_rt298.o hda_dsp_common.o
+snd-soc-sst-sof-pcm512x-objs := sof_pcm512x.o hda_dsp_common.o
 snd-soc-sst-glk-rt5682_max98357a-objs := glk_rt5682_max98357a.o hda_dsp_common.o
 snd-soc-sst-bytcr-rt5640-objs := bytcr_rt5640.o
 snd-soc-sst-bytcr-rt5651-objs := bytcr_rt5651.o
@@ -18,7 +19,7 @@
 snd-soc-sst-byt-cht-da7213-objs := bytcht_da7213.o
 snd-soc-sst-byt-cht-es8316-objs := bytcht_es8316.o
 snd-soc-sst-byt-cht-nocodec-objs := bytcht_nocodec.o
-snd-soc-sof_rt5682-objs := sof_rt5682.o hda_dsp_common.o
+snd-soc-sof_rt5682-objs := sof_rt5682.o hda_dsp_common.o sof_maxim_common.o
 snd-soc-cml_rt1011_rt5682-objs := cml_rt1011_rt5682.o hda_dsp_common.o
 snd-soc-kbl_da7219_max98357a-objs := kbl_da7219_max98357a.o
 snd-soc-kbl_da7219_max98927-objs := kbl_da7219_max98927.o
@@ -30,13 +31,18 @@
 snd-skl_nau88l25_max98357a-objs := skl_nau88l25_max98357a.o
 snd-soc-skl_nau88l25_ssm4567-objs := skl_nau88l25_ssm4567.o
 snd-soc-sof_da7219_max98373-objs := sof_da7219_max98373.o hda_dsp_common.o
-
+snd-soc-sof-sdw-objs += sof_sdw.o				\
+			sof_sdw_rt711.o sof_sdw_rt700.o		\
+			sof_sdw_rt1308.o sof_sdw_rt715.o	\
+			sof_sdw_rt5682.o			\
+			sof_sdw_dmic.o sof_sdw_hdmi.o hda_dsp_common.o
 obj-$(CONFIG_SND_SOC_INTEL_SOF_RT5682_MACH) += snd-soc-sof_rt5682.o
 obj-$(CONFIG_SND_SOC_INTEL_HASWELL_MACH) += snd-soc-sst-haswell.o
 obj-$(CONFIG_SND_SOC_INTEL_BYT_RT5640_MACH) += snd-soc-sst-byt-rt5640-mach.o
 obj-$(CONFIG_SND_SOC_INTEL_BYT_MAX98090_MACH) += snd-soc-sst-byt-max98090-mach.o
 obj-$(CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_COMMON) += snd-soc-sst-bxt-da7219_max98357a.o
 obj-$(CONFIG_SND_SOC_INTEL_BXT_RT298_MACH) += snd-soc-sst-bxt-rt298.o
+obj-$(CONFIG_SND_SOC_INTEL_SOF_PCM512x_MACH) += snd-soc-sst-sof-pcm512x.o
 obj-$(CONFIG_SND_SOC_INTEL_GLK_RT5682_MAX98357A_MACH) += snd-soc-sst-glk-rt5682_max98357a.o
 obj-$(CONFIG_SND_SOC_INTEL_BROADWELL_MACH) += snd-soc-sst-broadwell.o
 obj-$(CONFIG_SND_SOC_INTEL_BDW_RT5650_MACH) += snd-soc-sst-bdw-rt5650-mach.o
@@ -62,4 +68,4 @@
 obj-$(CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH) += snd-soc-skl_nau88l25_ssm4567.o
 obj-$(CONFIG_SND_SOC_INTEL_SKL_HDA_DSP_GENERIC_MACH) += snd-soc-skl_hda_dsp.o
 obj-$(CONFIG_SND_SOC_INTEL_SOF_DA7219_MAX98373_MACH) += snd-soc-sof_da7219_max98373.o
-
+obj-$(CONFIG_SND_SOC_INTEL_SOUNDWIRE_SOF_MACH) += snd-soc-sof-sdw.o
diff --git a/sound/soc/intel/boards/bdw-rt5650.c b/sound/soc/intel/boards/bdw-rt5650.c
index 1a30243..af2f502 100644
--- a/sound/soc/intel/boards/bdw-rt5650.c
+++ b/sound/soc/intel/boards/bdw-rt5650.c
@@ -107,7 +107,7 @@ static int bdw_rt5650_hw_params(struct snd_pcm_substream *substream,
 	struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	int ret;
 
 	/* Workaround: set codec PLL to 19.2MHz that PLL source is
@@ -166,8 +166,8 @@ static int bdw_rt5650_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct bdw_rt5650_priv *bdw_rt5650 =
 		snd_soc_card_get_drvdata(rtd->card);
-	struct snd_soc_component *component = rtd->codec_dai->component;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_component *component = codec_dai->component;
 	int ret;
 
 	/* Enable codec ASRC function for Stereo DAC/Stereo1 ADC/DMIC/I2S1.
@@ -226,9 +226,6 @@ SND_SOC_DAILINK_DEF(be,
 #if IS_ENABLED(CONFIG_SND_SOC_SOF_BROADWELL)
 SND_SOC_DAILINK_DEF(ssp0_port,
 	    DAILINK_COMP_ARRAY(COMP_CPU("ssp0-port")));
-#else
-SND_SOC_DAILINK_DEF(ssp0_port,
-	    DAILINK_COMP_ARRAY(COMP_DUMMY()));
 #endif
 
 static struct snd_soc_dai_link bdw_rt5650_dais[] = {
@@ -257,14 +254,17 @@ static struct snd_soc_dai_link bdw_rt5650_dais[] = {
 		.no_pcm = 1,
 		.dai_fmt = SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_NB_NF |
 			SND_SOC_DAIFMT_CBS_CFS,
-		.ignore_suspend = 1,
 		.ignore_pmdown_time = 1,
 		.be_hw_params_fixup = broadwell_ssp0_fixup,
 		.ops = &bdw_rt5650_ops,
 		.dpcm_playback = 1,
 		.dpcm_capture = 1,
 		.init = bdw_rt5650_init,
+#if !IS_ENABLED(CONFIG_SND_SOC_SOF_BROADWELL)
+		SND_SOC_DAILINK_REG(dummy, be, dummy),
+#else
 		SND_SOC_DAILINK_REG(ssp0_port, be, platform),
+#endif
 	},
 };
 
@@ -298,7 +298,7 @@ static int bdw_rt5650_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	/* override plaform name, if required */
-	mach = (&pdev->dev)->platform_data;
+	mach = pdev->dev.platform_data;
 	ret = snd_soc_fixup_dai_links_platform_name(&bdw_rt5650_card,
 						    mach->mach_params.platform);
 
diff --git a/sound/soc/intel/boards/bdw-rt5677.c b/sound/soc/intel/boards/bdw-rt5677.c
index bb643c9..cc41a34 100644
--- a/sound/soc/intel/boards/bdw-rt5677.c
+++ b/sound/soc/intel/boards/bdw-rt5677.c
@@ -157,7 +157,7 @@ static int bdw_rt5677_hw_params(struct snd_pcm_substream *substream,
 	struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	int ret;
 
 	ret = snd_soc_dai_set_sysclk(codec_dai, RT5677_SCLK_S_MCLK, 24576000,
@@ -174,7 +174,7 @@ static int bdw_rt5677_dsp_hw_params(struct snd_pcm_substream *substream,
 	struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	int ret;
 
 	ret = snd_soc_dai_set_sysclk(codec_dai, RT5677_SCLK_S_PLL1, 24576000,
@@ -226,7 +226,7 @@ static int bdw_rt5677_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct bdw_rt5677_priv *bdw_rt5677 =
 			snd_soc_card_get_drvdata(rtd->card);
-	struct snd_soc_component *component = rtd->codec_dai->component;
+	struct snd_soc_component *component = asoc_rtd_to_codec(rtd, 0)->component;
 	struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
 	int ret;
 
@@ -298,9 +298,6 @@ SND_SOC_DAILINK_DEF(be,
 #if IS_ENABLED(CONFIG_SND_SOC_SOF_BROADWELL)
 SND_SOC_DAILINK_DEF(ssp0_port,
 	    DAILINK_COMP_ARRAY(COMP_CPU("ssp0-port")));
-#else
-SND_SOC_DAILINK_DEF(ssp0_port,
-	    DAILINK_COMP_ARRAY(COMP_DUMMY()));
 #endif
 
 /* Wake on voice interface */
@@ -343,14 +340,17 @@ static struct snd_soc_dai_link bdw_rt5677_dais[] = {
 		.no_pcm = 1,
 		.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
 			SND_SOC_DAIFMT_CBS_CFS,
-		.ignore_suspend = 1,
 		.ignore_pmdown_time = 1,
 		.be_hw_params_fixup = broadwell_ssp0_fixup,
 		.ops = &bdw_rt5677_ops,
 		.dpcm_playback = 1,
 		.dpcm_capture = 1,
 		.init = bdw_rt5677_init,
+#if !IS_ENABLED(CONFIG_SND_SOC_SOF_BROADWELL)
+		SND_SOC_DAILINK_REG(dummy, be, dummy),
+#else
 		SND_SOC_DAILINK_REG(ssp0_port, be, platform),
+#endif
 	},
 };
 
@@ -412,7 +412,7 @@ static int bdw_rt5677_probe(struct platform_device *pdev)
 	}
 
 	/* override plaform name, if required */
-	mach = (&pdev->dev)->platform_data;
+	mach = pdev->dev.platform_data;
 	ret = snd_soc_fixup_dai_links_platform_name(&bdw_rt5677_card,
 						    mach->mach_params.platform);
 	if (ret)
diff --git a/sound/soc/intel/boards/broadwell.c b/sound/soc/intel/boards/broadwell.c
index b9c12e2..f9a8336 100644
--- a/sound/soc/intel/boards/broadwell.c
+++ b/sound/soc/intel/boards/broadwell.c
@@ -70,7 +70,7 @@ static const struct snd_soc_dapm_route broadwell_rt286_map[] = {
 
 static int broadwell_rt286_codec_init(struct snd_soc_pcm_runtime *rtd)
 {
-	struct snd_soc_component *component = rtd->codec_dai->component;
+	struct snd_soc_component *component = asoc_rtd_to_codec(rtd, 0)->component;
 	int ret = 0;
 	ret = snd_soc_card_jack_new(rtd->card, "Headset",
 		SND_JACK_HEADSET | SND_JACK_BTN_0, &broadwell_headset,
@@ -104,7 +104,7 @@ static int broadwell_rt286_hw_params(struct snd_pcm_substream *substream,
 	struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	int ret;
 
 	ret = snd_soc_dai_set_sysclk(codec_dai, RT286_SCLK_S_PLL, 24000000,
@@ -167,9 +167,6 @@ SND_SOC_DAILINK_DEF(codec,
 #if IS_ENABLED(CONFIG_SND_SOC_SOF_BROADWELL)
 SND_SOC_DAILINK_DEF(ssp0_port,
 	    DAILINK_COMP_ARRAY(COMP_CPU("ssp0-port")));
-#else
-SND_SOC_DAILINK_DEF(ssp0_port,
-	    DAILINK_COMP_ARRAY(COMP_DUMMY()));
 #endif
 
 /* broadwell digital audio interface glue - connects codec <--> CPU */
@@ -220,13 +217,16 @@ static struct snd_soc_dai_link broadwell_rt286_dais[] = {
 		.init = broadwell_rt286_codec_init,
 		.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
 			SND_SOC_DAIFMT_CBS_CFS,
-		.ignore_suspend = 1,
 		.ignore_pmdown_time = 1,
 		.be_hw_params_fixup = broadwell_ssp0_fixup,
 		.ops = &broadwell_rt286_ops,
 		.dpcm_playback = 1,
 		.dpcm_capture = 1,
+#if !IS_ENABLED(CONFIG_SND_SOC_SOF_BROADWELL)
+		SND_SOC_DAILINK_REG(dummy, codec, dummy),
+#else
 		SND_SOC_DAILINK_REG(ssp0_port, codec, platform),
+#endif
 	},
 };
 
@@ -283,7 +283,7 @@ static int broadwell_audio_probe(struct platform_device *pdev)
 	broadwell_rt286.dev = &pdev->dev;
 
 	/* override plaform name, if required */
-	mach = (&pdev->dev)->platform_data;
+	mach = pdev->dev.platform_data;
 	ret = snd_soc_fixup_dai_links_platform_name(&broadwell_rt286,
 						    mach->mach_params.platform);
 	if (ret)
diff --git a/sound/soc/intel/boards/bxt_da7219_max98357a.c b/sound/soc/intel/boards/bxt_da7219_max98357a.c
index 9177401..44016c1 100644
--- a/sound/soc/intel/boards/bxt_da7219_max98357a.c
+++ b/sound/soc/intel/boards/bxt_da7219_max98357a.c
@@ -179,8 +179,8 @@ static int broxton_ssp_fixup(struct snd_soc_pcm_runtime *rtd,
 static int broxton_da7219_codec_init(struct snd_soc_pcm_runtime *rtd)
 {
 	int ret;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	struct snd_soc_component *component = rtd->codec_dai->component;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_component *component = asoc_rtd_to_codec(rtd, 0)->component;
 	int clk_freq;
 
 	/* Configure sysclk for codec */
@@ -226,7 +226,7 @@ static int broxton_da7219_codec_init(struct snd_soc_pcm_runtime *rtd)
 static int broxton_hdmi_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct bxt_card_private *ctx = snd_soc_card_get_drvdata(rtd->card);
-	struct snd_soc_dai *dai = rtd->codec_dai;
+	struct snd_soc_dai *dai = asoc_rtd_to_codec(rtd, 0);
 	struct bxt_hdmi_pcm *pcm;
 
 	pcm = devm_kzalloc(rtd->card->dev, sizeof(*pcm), GFP_KERNEL);
@@ -244,7 +244,7 @@ static int broxton_hdmi_init(struct snd_soc_pcm_runtime *rtd)
 static int broxton_da7219_fe_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct snd_soc_dapm_context *dapm;
-	struct snd_soc_component *component = rtd->cpu_dai->component;
+	struct snd_soc_component *component = asoc_rtd_to_cpu(rtd, 0)->component;
 
 	dapm = snd_soc_component_get_dapm(component);
 	snd_soc_dapm_ignore_suspend(dapm, "Reference Capture");
@@ -721,7 +721,7 @@ static int broxton_audio_probe(struct platform_device *pdev)
 	}
 
 	/* override plaform name, if required */
-	mach = (&pdev->dev)->platform_data;
+	mach = pdev->dev.platform_data;
 	platform_name = mach->mach_params.platform;
 
 	ret = snd_soc_fixup_dai_links_platform_name(&broxton_audio_card,
diff --git a/sound/soc/intel/boards/bxt_rt298.c b/sound/soc/intel/boards/bxt_rt298.c
index 4b67f26..7a4decf 100644
--- a/sound/soc/intel/boards/bxt_rt298.c
+++ b/sound/soc/intel/boards/bxt_rt298.c
@@ -155,7 +155,7 @@ static const struct snd_soc_dapm_route geminilake_rt298_map[] = {
 static int broxton_rt298_fe_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct snd_soc_dapm_context *dapm;
-	struct snd_soc_component *component = rtd->cpu_dai->component;
+	struct snd_soc_component *component = asoc_rtd_to_cpu(rtd, 0)->component;
 
 	dapm = snd_soc_component_get_dapm(component);
 	snd_soc_dapm_ignore_suspend(dapm, "Reference Capture");
@@ -165,7 +165,7 @@ static int broxton_rt298_fe_init(struct snd_soc_pcm_runtime *rtd)
 
 static int broxton_rt298_codec_init(struct snd_soc_pcm_runtime *rtd)
 {
-	struct snd_soc_component *component = rtd->codec_dai->component;
+	struct snd_soc_component *component = asoc_rtd_to_codec(rtd, 0)->component;
 	int ret = 0;
 
 	ret = snd_soc_card_jack_new(rtd->card, "Headset",
@@ -186,7 +186,7 @@ static int broxton_rt298_codec_init(struct snd_soc_pcm_runtime *rtd)
 static int broxton_hdmi_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct bxt_rt286_private *ctx = snd_soc_card_get_drvdata(rtd->card);
-	struct snd_soc_dai *dai = rtd->codec_dai;
+	struct snd_soc_dai *dai = asoc_rtd_to_codec(rtd, 0);
 	struct bxt_hdmi_pcm *pcm;
 
 	pcm = devm_kzalloc(rtd->card->dev, sizeof(*pcm), GFP_KERNEL);
@@ -225,7 +225,7 @@ static int broxton_rt298_hw_params(struct snd_pcm_substream *substream,
 	struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	int ret;
 
 	ret = snd_soc_dai_set_sysclk(codec_dai, RT298_SCLK_S_PLL,
@@ -627,7 +627,7 @@ static int broxton_audio_probe(struct platform_device *pdev)
 	snd_soc_card_set_drvdata(card, ctx);
 
 	/* override plaform name, if required */
-	mach = (&pdev->dev)->platform_data;
+	mach = pdev->dev.platform_data;
 	platform_name = mach->mach_params.platform;
 
 	ret = snd_soc_fixup_dai_links_platform_name(card,
diff --git a/sound/soc/intel/boards/byt-max98090.c b/sound/soc/intel/boards/byt-max98090.c
index 01739ad..f5097da 100644
--- a/sound/soc/intel/boards/byt-max98090.c
+++ b/sound/soc/intel/boards/byt-max98090.c
@@ -89,7 +89,7 @@ static int byt_max98090_init(struct snd_soc_pcm_runtime *runtime)
 
 	card->dapm.idle_bias_off = true;
 
-	ret = snd_soc_dai_set_sysclk(runtime->codec_dai,
+	ret = snd_soc_dai_set_sysclk(asoc_rtd_to_codec(runtime, 0),
 				     M98090_REG_SYSTEM_CLOCK,
 				     25000000, SND_SOC_CLOCK_IN);
 	if (ret < 0) {
diff --git a/sound/soc/intel/boards/byt-rt5640.c b/sound/soc/intel/boards/byt-rt5640.c
index 0c76daf..ace232f 100644
--- a/sound/soc/intel/boards/byt-rt5640.c
+++ b/sound/soc/intel/boards/byt-rt5640.c
@@ -73,7 +73,7 @@ static int byt_rt5640_hw_params(struct snd_pcm_substream *substream,
 				struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	int ret;
 
 	ret = snd_soc_dai_set_sysclk(codec_dai, RT5640_SCLK_S_PLL1,
@@ -123,7 +123,7 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 static int byt_rt5640_init(struct snd_soc_pcm_runtime *runtime)
 {
 	int ret;
-	struct snd_soc_component *component = runtime->codec_dai->component;
+	struct snd_soc_component *component = asoc_rtd_to_codec(runtime, 0)->component;
 	struct snd_soc_card *card = runtime->card;
 	const struct snd_soc_dapm_route *custom_map;
 	int num_routes;
diff --git a/sound/soc/intel/boards/bytcht_cx2072x.c b/sound/soc/intel/boards/bytcht_cx2072x.c
index 67f06c9..3b3df7c 100644
--- a/sound/soc/intel/boards/bytcht_cx2072x.c
+++ b/sound/soc/intel/boards/bytcht_cx2072x.c
@@ -70,7 +70,7 @@ static const struct acpi_gpio_mapping byt_cht_cx2072x_acpi_gpios[] = {
 static int byt_cht_cx2072x_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct snd_soc_card *card = rtd->card;
-	struct snd_soc_component *codec = rtd->codec_dai->component;
+	struct snd_soc_component *codec = asoc_rtd_to_codec(rtd, 0)->component;
 	int ret;
 
 	if (devm_acpi_dev_add_driver_gpios(codec->dev,
@@ -80,7 +80,7 @@ static int byt_cht_cx2072x_init(struct snd_soc_pcm_runtime *rtd)
 	card->dapm.idle_bias_off = true;
 
 	/* set the default PLL rate, the clock is handled by the codec driver */
-	ret = snd_soc_dai_set_sysclk(rtd->codec_dai, CX2072X_MCLK_EXTERNAL_PLL,
+	ret = snd_soc_dai_set_sysclk(asoc_rtd_to_codec(rtd, 0), CX2072X_MCLK_EXTERNAL_PLL,
 				     19200000, SND_SOC_CLOCK_IN);
 	if (ret) {
 		dev_err(rtd->dev, "Could not set sysclk\n");
@@ -97,7 +97,7 @@ static int byt_cht_cx2072x_init(struct snd_soc_pcm_runtime *rtd)
 
 	snd_soc_component_set_jack(codec, &byt_cht_cx2072x_headset, NULL);
 
-	snd_soc_dai_set_bclk_ratio(rtd->codec_dai, 50);
+	snd_soc_dai_set_bclk_ratio(asoc_rtd_to_codec(rtd, 0), 50);
 
 	return ret;
 }
@@ -123,7 +123,7 @@ static int byt_cht_cx2072x_fixup(struct snd_soc_pcm_runtime *rtd,
 	 * with explicit setting to I2S 2ch 24-bit. The word length is set with
 	 * dai_set_tdm_slot() since there is no other API exposed
 	 */
-	ret = snd_soc_dai_set_fmt(rtd->cpu_dai,
+	ret = snd_soc_dai_set_fmt(asoc_rtd_to_cpu(rtd, 0),
 				SND_SOC_DAIFMT_I2S     |
 				SND_SOC_DAIFMT_NB_NF   |
 				SND_SOC_DAIFMT_CBS_CFS);
@@ -132,7 +132,7 @@ static int byt_cht_cx2072x_fixup(struct snd_soc_pcm_runtime *rtd,
 		return ret;
 	}
 
-	ret = snd_soc_dai_set_tdm_slot(rtd->cpu_dai, 0x3, 0x3, 2, 24);
+	ret = snd_soc_dai_set_tdm_slot(asoc_rtd_to_cpu(rtd, 0), 0x3, 0x3, 2, 24);
 	if (ret < 0) {
 		dev_err(rtd->dev, "can't set I2S config, err %d\n", ret);
 		return ret;
diff --git a/sound/soc/intel/boards/bytcht_da7213.c b/sound/soc/intel/boards/bytcht_da7213.c
index eda7a500..5e96e7d 100644
--- a/sound/soc/intel/boards/bytcht_da7213.c
+++ b/sound/soc/intel/boards/bytcht_da7213.c
@@ -78,7 +78,7 @@ static int codec_fixup(struct snd_soc_pcm_runtime *rtd,
 	 * with explicit setting to I2S 2ch 24-bit. The word length is set with
 	 * dai_set_tdm_slot() since there is no other API exposed
 	 */
-	ret = snd_soc_dai_set_fmt(rtd->cpu_dai,
+	ret = snd_soc_dai_set_fmt(asoc_rtd_to_cpu(rtd, 0),
 				  SND_SOC_DAIFMT_I2S     |
 				  SND_SOC_DAIFMT_NB_NF   |
 				  SND_SOC_DAIFMT_CBS_CFS);
@@ -87,7 +87,7 @@ static int codec_fixup(struct snd_soc_pcm_runtime *rtd,
 		return ret;
 	}
 
-	ret = snd_soc_dai_set_tdm_slot(rtd->cpu_dai, 0x3, 0x3, 2, 24);
+	ret = snd_soc_dai_set_tdm_slot(asoc_rtd_to_cpu(rtd, 0), 0x3, 0x3, 2, 24);
 	if (ret < 0) {
 		dev_err(rtd->dev, "can't set I2S config, err %d\n", ret);
 		return ret;
@@ -106,7 +106,7 @@ static int aif1_hw_params(struct snd_pcm_substream *substream,
 			  struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	int ret;
 
 	ret = snd_soc_dai_set_sysclk(codec_dai, DA7213_CLKSRC_MCLK,
@@ -127,7 +127,7 @@ static int aif1_hw_params(struct snd_pcm_substream *substream,
 static int aif1_hw_free(struct snd_pcm_substream *substream)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	int ret;
 
 	ret = snd_soc_dai_set_pll(codec_dai, 0,
@@ -231,7 +231,7 @@ static int bytcht_da7213_probe(struct platform_device *pdev)
 	int ret_val = 0;
 	int i;
 
-	mach = (&pdev->dev)->platform_data;
+	mach = pdev->dev.platform_data;
 	card = &bytcht_da7213_card;
 	card->dev = &pdev->dev;
 
diff --git a/sound/soc/intel/boards/bytcht_es8316.c b/sound/soc/intel/boards/bytcht_es8316.c
index 0adc5a5..ddcd070 100644
--- a/sound/soc/intel/boards/bytcht_es8316.c
+++ b/sound/soc/intel/boards/bytcht_es8316.c
@@ -157,7 +157,7 @@ static struct snd_soc_jack_pin byt_cht_es8316_jack_pins[] = {
 
 static int byt_cht_es8316_init(struct snd_soc_pcm_runtime *runtime)
 {
-	struct snd_soc_component *codec = runtime->codec_dai->component;
+	struct snd_soc_component *codec = asoc_rtd_to_codec(runtime, 0)->component;
 	struct snd_soc_card *card = runtime->card;
 	struct byt_cht_es8316_private *priv = snd_soc_card_get_drvdata(card);
 	const struct snd_soc_dapm_route *custom_map;
@@ -212,7 +212,7 @@ static int byt_cht_es8316_init(struct snd_soc_pcm_runtime *runtime)
 	if (ret)
 		dev_err(card->dev, "unable to enable MCLK\n");
 
-	ret = snd_soc_dai_set_sysclk(runtime->codec_dai, 0, 19200000,
+	ret = snd_soc_dai_set_sysclk(asoc_rtd_to_codec(runtime, 0), 0, 19200000,
 				     SND_SOC_CLOCK_IN);
 	if (ret < 0) {
 		dev_err(card->dev, "can't set codec clock %d\n", ret);
@@ -262,7 +262,7 @@ static int byt_cht_es8316_codec_fixup(struct snd_soc_pcm_runtime *rtd,
 	 * with explicit setting to I2S 2ch 24-bit. The word length is set with
 	 * dai_set_tdm_slot() since there is no other API exposed
 	 */
-	ret = snd_soc_dai_set_fmt(rtd->cpu_dai,
+	ret = snd_soc_dai_set_fmt(asoc_rtd_to_cpu(rtd, 0),
 				SND_SOC_DAIFMT_I2S     |
 				SND_SOC_DAIFMT_NB_NF   |
 				SND_SOC_DAIFMT_CBS_CFS
@@ -272,7 +272,7 @@ static int byt_cht_es8316_codec_fixup(struct snd_soc_pcm_runtime *rtd,
 		return ret;
 	}
 
-	ret = snd_soc_dai_set_tdm_slot(rtd->cpu_dai, 0x3, 0x3, 2, bits);
+	ret = snd_soc_dai_set_tdm_slot(asoc_rtd_to_cpu(rtd, 0), 0x3, 0x3, 2, bits);
 	if (ret < 0) {
 		dev_err(rtd->dev, "can't set I2S config, err %d\n", ret);
 		return ret;
diff --git a/sound/soc/intel/boards/bytcht_nocodec.c b/sound/soc/intel/boards/bytcht_nocodec.c
index 479af80..8c0dab1 100644
--- a/sound/soc/intel/boards/bytcht_nocodec.c
+++ b/sound/soc/intel/boards/bytcht_nocodec.c
@@ -58,7 +58,7 @@ static int codec_fixup(struct snd_soc_pcm_runtime *rtd,
 	 * with explicit setting to I2S 2ch 24-bit. The word length is set with
 	 * dai_set_tdm_slot() since there is no other API exposed
 	 */
-	ret = snd_soc_dai_set_fmt(rtd->cpu_dai,
+	ret = snd_soc_dai_set_fmt(asoc_rtd_to_cpu(rtd, 0),
 				  SND_SOC_DAIFMT_I2S     |
 				  SND_SOC_DAIFMT_NB_NF   |
 				  SND_SOC_DAIFMT_CBS_CFS);
@@ -68,7 +68,7 @@ static int codec_fixup(struct snd_soc_pcm_runtime *rtd,
 		return ret;
 	}
 
-	ret = snd_soc_dai_set_tdm_slot(rtd->cpu_dai, 0x3, 0x3, 2, 24);
+	ret = snd_soc_dai_set_tdm_slot(asoc_rtd_to_cpu(rtd, 0), 0x3, 0x3, 2, 24);
 	if (ret < 0) {
 		dev_err(rtd->dev, "can't set I2S config, err %d\n", ret);
 		return ret;
diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index 6bd9ae8..08f4ae9 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -381,7 +381,7 @@ static int byt_rt5640_aif1_hw_params(struct snd_pcm_substream *substream,
 					struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *dai = rtd->codec_dai;
+	struct snd_soc_dai *dai = asoc_rtd_to_codec(rtd, 0);
 
 	return byt_rt5640_prepare_and_enable_pll1(dai, params_rate(params));
 }
@@ -591,6 +591,17 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 					BYT_RT5640_SSP0_AIF1 |
 					BYT_RT5640_MCLK_EN),
 	},
+	{
+		/* MPMAN MPWIN895CL */
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "MPMAN"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "MPWIN8900CL"),
+		},
+		.driver_data = (void *)(BYTCR_INPUT_DEFAULTS |
+					BYT_RT5640_MONO_SPEAKER |
+					BYT_RT5640_SSP0_AIF1 |
+					BYT_RT5640_MCLK_EN),
+	},
 	{	/* MSI S100 tablet */
 		.matches = {
 			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Micro-Star International Co., Ltd."),
@@ -805,7 +816,7 @@ static int byt_rt5640_init(struct snd_soc_pcm_runtime *runtime)
 {
 	struct snd_soc_card *card = runtime->card;
 	struct byt_rt5640_private *priv = snd_soc_card_get_drvdata(card);
-	struct snd_soc_component *component = runtime->codec_dai->component;
+	struct snd_soc_component *component = asoc_rtd_to_codec(runtime, 0)->component;
 	const struct snd_soc_dapm_route *custom_map;
 	int num_routes;
 	int ret;
@@ -962,7 +973,7 @@ static int byt_rt5640_codec_fixup(struct snd_soc_pcm_runtime *rtd,
 	 * with explicit setting to I2S 2ch. The word length is set with
 	 * dai_set_tdm_slot() since there is no other API exposed
 	 */
-	ret = snd_soc_dai_set_fmt(rtd->cpu_dai,
+	ret = snd_soc_dai_set_fmt(asoc_rtd_to_cpu(rtd, 0),
 				  SND_SOC_DAIFMT_I2S     |
 				  SND_SOC_DAIFMT_NB_NF   |
 				  SND_SOC_DAIFMT_CBS_CFS);
@@ -971,7 +982,7 @@ static int byt_rt5640_codec_fixup(struct snd_soc_pcm_runtime *rtd,
 		return ret;
 	}
 
-	ret = snd_soc_dai_set_tdm_slot(rtd->cpu_dai, 0x3, 0x3, 2, bits);
+	ret = snd_soc_dai_set_tdm_slot(asoc_rtd_to_cpu(rtd, 0), 0x3, 0x3, 2, bits);
 	if (ret < 0) {
 		dev_err(rtd->dev, "can't set I2S config, err %d\n", ret);
 		return ret;
diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c
index 5074bb5..214ef41 100644
--- a/sound/soc/intel/boards/bytcr_rt5651.c
+++ b/sound/soc/intel/boards/bytcr_rt5651.c
@@ -348,7 +348,7 @@ static int byt_rt5651_aif1_hw_params(struct snd_pcm_substream *substream,
 					struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	snd_pcm_format_t format = params_format(params);
 	int rate = params_rate(params);
 	int bclk_ratio;
@@ -540,7 +540,7 @@ static int byt_rt5651_add_codec_device_props(struct device *i2c_dev)
 static int byt_rt5651_init(struct snd_soc_pcm_runtime *runtime)
 {
 	struct snd_soc_card *card = runtime->card;
-	struct snd_soc_component *codec = runtime->codec_dai->component;
+	struct snd_soc_component *codec = asoc_rtd_to_codec(runtime, 0)->component;
 	struct byt_rt5651_private *priv = snd_soc_card_get_drvdata(card);
 	const struct snd_soc_dapm_route *custom_map;
 	int num_routes;
@@ -685,7 +685,7 @@ static int byt_rt5651_codec_fixup(struct snd_soc_pcm_runtime *rtd,
 	 * with explicit setting to I2S 2ch. The word length is set with
 	 * dai_set_tdm_slot() since there is no other API exposed
 	 */
-	ret = snd_soc_dai_set_fmt(rtd->cpu_dai,
+	ret = snd_soc_dai_set_fmt(asoc_rtd_to_cpu(rtd, 0),
 				  SND_SOC_DAIFMT_I2S     |
 				  SND_SOC_DAIFMT_NB_NF   |
 				  SND_SOC_DAIFMT_CBS_CFS
@@ -696,7 +696,7 @@ static int byt_rt5651_codec_fixup(struct snd_soc_pcm_runtime *rtd,
 		return ret;
 	}
 
-	ret = snd_soc_dai_set_tdm_slot(rtd->cpu_dai, 0x3, 0x3, 2, bits);
+	ret = snd_soc_dai_set_tdm_slot(asoc_rtd_to_cpu(rtd, 0), 0x3, 0x3, 2, bits);
 	if (ret < 0) {
 		dev_err(rtd->dev, "can't set I2S config, err %d\n", ret);
 		return ret;
diff --git a/sound/soc/intel/boards/cht_bsw_max98090_ti.c b/sound/soc/intel/boards/cht_bsw_max98090_ti.c
index 70bb86f..1357017 100644
--- a/sound/soc/intel/boards/cht_bsw_max98090_ti.c
+++ b/sound/soc/intel/boards/cht_bsw_max98090_ti.c
@@ -113,7 +113,7 @@ static int cht_aif1_hw_params(struct snd_pcm_substream *substream,
 			     struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	int ret;
 
 	ret = snd_soc_dai_set_sysclk(codec_dai, M98090_REG_SYSTEM_CLOCK,
@@ -257,7 +257,7 @@ static int cht_codec_fixup(struct snd_soc_pcm_runtime *rtd,
 	int ret = 0;
 	unsigned int fmt = 0;
 
-	ret = snd_soc_dai_set_tdm_slot(rtd->cpu_dai, 0x3, 0x3, 2, 16);
+	ret = snd_soc_dai_set_tdm_slot(asoc_rtd_to_cpu(rtd, 0), 0x3, 0x3, 2, 16);
 	if (ret < 0) {
 		dev_err(rtd->dev, "can't set cpu_dai slot fmt: %d\n", ret);
 		return ret;
@@ -266,7 +266,7 @@ static int cht_codec_fixup(struct snd_soc_pcm_runtime *rtd,
 	fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
 				| SND_SOC_DAIFMT_CBS_CFS;
 
-	ret = snd_soc_dai_set_fmt(rtd->cpu_dai, fmt);
+	ret = snd_soc_dai_set_fmt(asoc_rtd_to_cpu(rtd, 0), fmt);
 	if (ret < 0) {
 		dev_err(rtd->dev, "can't set cpu_dai set fmt: %d\n", ret);
 		return ret;
@@ -553,7 +553,7 @@ static int snd_cht_mc_probe(struct platform_device *pdev)
 
 	/* override plaform name, if required */
 	snd_soc_card_cht.dev = &pdev->dev;
-	mach = (&pdev->dev)->platform_data;
+	mach = pdev->dev.platform_data;
 	platform_name = mach->mach_params.platform;
 
 	ret_val = snd_soc_fixup_dai_links_platform_name(&snd_soc_card_cht,
diff --git a/sound/soc/intel/boards/cht_bsw_nau8824.c b/sound/soc/intel/boards/cht_bsw_nau8824.c
index 501bad3..f456150 100644
--- a/sound/soc/intel/boards/cht_bsw_nau8824.c
+++ b/sound/soc/intel/boards/cht_bsw_nau8824.c
@@ -73,7 +73,7 @@ static int cht_aif1_hw_params(struct snd_pcm_substream *substream,
 	struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	int ret;
 
 	ret = snd_soc_dai_set_sysclk(codec_dai, NAU8824_CLK_FLL_FS, 0,
@@ -96,7 +96,7 @@ static int cht_codec_init(struct snd_soc_pcm_runtime *runtime)
 {
 	struct cht_mc_private *ctx = snd_soc_card_get_drvdata(runtime->card);
 	struct snd_soc_jack *jack = &ctx->jack;
-	struct snd_soc_dai *codec_dai = runtime->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(runtime, 0);
 	struct snd_soc_component *component = codec_dai->component;
 	int ret, jack_type;
 
@@ -259,7 +259,7 @@ static int snd_cht_mc_probe(struct platform_device *pdev)
 
 	/* override plaform name, if required */
 	snd_soc_card_cht.dev = &pdev->dev;
-	mach = (&pdev->dev)->platform_data;
+	mach = pdev->dev.platform_data;
 	platform_name = mach->mach_params.platform;
 
 	ret_val = snd_soc_fixup_dai_links_platform_name(&snd_soc_card_cht,
diff --git a/sound/soc/intel/boards/cht_bsw_rt5645.c b/sound/soc/intel/boards/cht_bsw_rt5645.c
index b5b016d..e64eca5 100644
--- a/sound/soc/intel/boards/cht_bsw_rt5645.c
+++ b/sound/soc/intel/boards/cht_bsw_rt5645.c
@@ -208,7 +208,7 @@ static int cht_aif1_hw_params(struct snd_pcm_substream *substream,
 			     struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	int ret;
 
 	/* set codec PLL source to the 19.2MHz platform clock (MCLK) */
@@ -252,7 +252,7 @@ static int cht_codec_init(struct snd_soc_pcm_runtime *runtime)
 {
 	struct snd_soc_card *card = runtime->card;
 	struct cht_mc_private *ctx = snd_soc_card_get_drvdata(runtime->card);
-	struct snd_soc_component *component = runtime->codec_dai->component;
+	struct snd_soc_component *component = asoc_rtd_to_codec(runtime, 0)->component;
 	int jack_type;
 	int ret;
 
@@ -359,7 +359,7 @@ static int cht_codec_fixup(struct snd_soc_pcm_runtime *rtd,
 		 * with explicit setting to I2S 2ch 16-bit. The word length is set with
 		 * dai_set_tdm_slot() since there is no other API exposed
 		 */
-		ret = snd_soc_dai_set_fmt(rtd->cpu_dai,
+		ret = snd_soc_dai_set_fmt(asoc_rtd_to_cpu(rtd, 0),
 					SND_SOC_DAIFMT_I2S     |
 					SND_SOC_DAIFMT_NB_NF   |
 					SND_SOC_DAIFMT_CBS_CFS
@@ -369,7 +369,7 @@ static int cht_codec_fixup(struct snd_soc_pcm_runtime *rtd,
 			return ret;
 		}
 
-		ret = snd_soc_dai_set_fmt(rtd->codec_dai,
+		ret = snd_soc_dai_set_fmt(asoc_rtd_to_codec(rtd, 0),
 					SND_SOC_DAIFMT_I2S     |
 					SND_SOC_DAIFMT_NB_NF   |
 					SND_SOC_DAIFMT_CBS_CFS
@@ -379,7 +379,7 @@ static int cht_codec_fixup(struct snd_soc_pcm_runtime *rtd,
 			return ret;
 		}
 
-		ret = snd_soc_dai_set_tdm_slot(rtd->cpu_dai, 0x3, 0x3, 2, 16);
+		ret = snd_soc_dai_set_tdm_slot(asoc_rtd_to_cpu(rtd, 0), 0x3, 0x3, 2, 16);
 		if (ret < 0) {
 			dev_err(rtd->dev, "can't set I2S config, err %d\n", ret);
 			return ret;
@@ -393,7 +393,7 @@ static int cht_codec_fixup(struct snd_soc_pcm_runtime *rtd,
 		/*
 		 * Default mode for SSP configuration is TDM 4 slot
 		 */
-		ret = snd_soc_dai_set_fmt(rtd->codec_dai,
+		ret = snd_soc_dai_set_fmt(asoc_rtd_to_codec(rtd, 0),
 					SND_SOC_DAIFMT_DSP_B |
 					SND_SOC_DAIFMT_IB_NF |
 					SND_SOC_DAIFMT_CBS_CFS);
@@ -403,7 +403,7 @@ static int cht_codec_fixup(struct snd_soc_pcm_runtime *rtd,
 		}
 
 		/* TDM 4 slots 24 bit, set Rx & Tx bitmask to 4 active slots */
-		ret = snd_soc_dai_set_tdm_slot(rtd->codec_dai, 0xF, 0xF, 4, 24);
+		ret = snd_soc_dai_set_tdm_slot(asoc_rtd_to_codec(rtd, 0), 0xF, 0xF, 4, 24);
 		if (ret < 0) {
 			dev_err(rtd->dev, "can't set codec TDM slot %d\n", ret);
 			return ret;
@@ -539,7 +539,7 @@ static int snd_cht_mc_probe(struct platform_device *pdev)
 	if (!drv)
 		return -ENOMEM;
 
-	mach = (&pdev->dev)->platform_data;
+	mach = pdev->dev.platform_data;
 
 	for (i = 0; i < ARRAY_SIZE(snd_soc_cards); i++) {
 		if (acpi_dev_found(snd_soc_cards[i].codec_id) &&
diff --git a/sound/soc/intel/boards/cht_bsw_rt5672.c b/sound/soc/intel/boards/cht_bsw_rt5672.c
index 9d65742..097023a 100644
--- a/sound/soc/intel/boards/cht_bsw_rt5672.c
+++ b/sound/soc/intel/boards/cht_bsw_rt5672.c
@@ -144,7 +144,7 @@ static int cht_aif1_hw_params(struct snd_pcm_substream *substream,
 					struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	int ret;
 
 	/* set codec PLL source to the 19.2MHz platform clock (MCLK) */
@@ -176,7 +176,7 @@ static const struct acpi_gpio_mapping cht_rt5672_gpios[] = {
 static int cht_codec_init(struct snd_soc_pcm_runtime *runtime)
 {
 	int ret;
-	struct snd_soc_dai *codec_dai = runtime->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(runtime, 0);
 	struct snd_soc_component *component = codec_dai->component;
 	struct cht_mc_private *ctx = snd_soc_card_get_drvdata(runtime->card);
 
@@ -255,7 +255,7 @@ static int cht_codec_fixup(struct snd_soc_pcm_runtime *rtd,
 	/*
 	 * Default mode for SSP configuration is TDM 4 slot
 	 */
-	ret = snd_soc_dai_set_fmt(rtd->codec_dai,
+	ret = snd_soc_dai_set_fmt(asoc_rtd_to_codec(rtd, 0),
 				  SND_SOC_DAIFMT_DSP_B |
 				  SND_SOC_DAIFMT_IB_NF |
 				  SND_SOC_DAIFMT_CBS_CFS);
@@ -265,7 +265,7 @@ static int cht_codec_fixup(struct snd_soc_pcm_runtime *rtd,
 	}
 
 	/* TDM 4 slots 24 bit, set Rx & Tx bitmask to 4 active slots */
-	ret = snd_soc_dai_set_tdm_slot(rtd->codec_dai, 0xF, 0xF, 4, 24);
+	ret = snd_soc_dai_set_tdm_slot(asoc_rtd_to_codec(rtd, 0), 0xF, 0xF, 4, 24);
 	if (ret < 0) {
 		dev_err(rtd->dev, "can't set codec TDM slot %d\n", ret);
 		return ret;
diff --git a/sound/soc/intel/boards/cml_rt1011_rt5682.c b/sound/soc/intel/boards/cml_rt1011_rt5682.c
index dd80d01..8167b29 100644
--- a/sound/soc/intel/boards/cml_rt1011_rt5682.c
+++ b/sound/soc/intel/boards/cml_rt1011_rt5682.c
@@ -85,7 +85,7 @@ static const struct snd_soc_dapm_route cml_rt1011_rt5682_map[] = {
 static int cml_rt5682_codec_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct card_private *ctx = snd_soc_card_get_drvdata(rtd->card);
-	struct snd_soc_component *component = rtd->codec_dai->component;
+	struct snd_soc_component *component = asoc_rtd_to_codec(rtd, 0)->component;
 	struct snd_soc_jack *jack;
 	int ret;
 
@@ -125,7 +125,7 @@ static int cml_rt5682_hw_params(struct snd_pcm_substream *substream,
 				struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	int clk_id, clk_freq, pll_out, ret;
 
 	clk_id = RT5682_PLL1_S_MCLK;
@@ -164,8 +164,7 @@ static int cml_rt1011_hw_params(struct snd_pcm_substream *substream,
 
 	srate = params_rate(params);
 
-	for (i = 0; i < rtd->num_codecs; i++) {
-		codec_dai = rtd->codec_dais[i];
+	for_each_rtd_codec_dais(rtd, i, codec_dai) {
 
 		/* 100 Fs to drive 24 bit data */
 		ret = snd_soc_dai_set_pll(codec_dai, 0, RT1011_PLL1_S_BCLK,
@@ -275,7 +274,7 @@ static int sof_card_late_probe(struct snd_soc_card *card)
 static int hdmi_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct card_private *ctx = snd_soc_card_get_drvdata(rtd->card);
-	struct snd_soc_dai *dai = rtd->codec_dai;
+	struct snd_soc_dai *dai = asoc_rtd_to_codec(rtd, 0);
 	struct hdmi_pcm *pcm;
 
 	pcm = devm_kzalloc(rtd->card->dev, sizeof(*pcm), GFP_KERNEL);
@@ -447,12 +446,12 @@ static int snd_cml_rt1011_probe(struct platform_device *pdev)
 	const char *platform_name;
 	int ret;
 
-	ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_ATOMIC);
+	ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
 	if (!ctx)
 		return -ENOMEM;
 
 	INIT_LIST_HEAD(&ctx->hdmi_pcm_list);
-	mach = (&pdev->dev)->platform_data;
+	mach = pdev->dev.platform_data;
 	snd_soc_card_cml.dev = &pdev->dev;
 	platform_name = mach->mach_params.platform;
 
diff --git a/sound/soc/intel/boards/glk_rt5682_max98357a.c b/sound/soc/intel/boards/glk_rt5682_max98357a.c
index 8e947ba..f13158e 100644
--- a/sound/soc/intel/boards/glk_rt5682_max98357a.c
+++ b/sound/soc/intel/boards/glk_rt5682_max98357a.c
@@ -136,8 +136,8 @@ static int geminilake_ssp_fixup(struct snd_soc_pcm_runtime *rtd,
 static int geminilake_rt5682_codec_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct glk_card_private *ctx = snd_soc_card_get_drvdata(rtd->card);
-	struct snd_soc_component *component = rtd->codec_dai->component;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_component *component = asoc_rtd_to_codec(rtd, 0)->component;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	struct snd_soc_jack *jack;
 	int ret;
 
@@ -188,7 +188,7 @@ static int geminilake_rt5682_hw_params(struct snd_pcm_substream *substream,
 	struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	int ret;
 
 	/* Set valid bitmask & configuration for I2S in 24 bit */
@@ -208,7 +208,7 @@ static struct snd_soc_ops geminilake_rt5682_ops = {
 static int geminilake_hdmi_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct glk_card_private *ctx = snd_soc_card_get_drvdata(rtd->card);
-	struct snd_soc_dai *dai = rtd->codec_dai;
+	struct snd_soc_dai *dai = asoc_rtd_to_codec(rtd, 0);
 	struct glk_hdmi_pcm *pcm;
 
 	pcm = devm_kzalloc(rtd->card->dev, sizeof(*pcm), GFP_KERNEL);
@@ -225,7 +225,7 @@ static int geminilake_hdmi_init(struct snd_soc_pcm_runtime *rtd)
 
 static int geminilake_rt5682_fe_init(struct snd_soc_pcm_runtime *rtd)
 {
-	struct snd_soc_component *component = rtd->cpu_dai->component;
+	struct snd_soc_component *component = asoc_rtd_to_cpu(rtd, 0)->component;
 	struct snd_soc_dapm_context *dapm;
 	int ret;
 
@@ -409,6 +409,7 @@ static struct snd_soc_dai_link geminilake_dais[] = {
 		.init = NULL,
 		.capture_only = 1,
 		.nonatomic = 1,
+		.dynamic = 1,
 		SND_SOC_DAILINK_REG(echoref, dummy, platform),
 	},
 	[GLK_DPCM_AUDIO_REF_CP] = {
@@ -604,7 +605,7 @@ static int geminilake_audio_probe(struct platform_device *pdev)
 	snd_soc_card_set_drvdata(card, ctx);
 
 	/* override plaform name, if required */
-	mach = (&pdev->dev)->platform_data;
+	mach = pdev->dev.platform_data;
 	platform_name = mach->mach_params.platform;
 
 	ret = snd_soc_fixup_dai_links_platform_name(card, platform_name);
diff --git a/sound/soc/intel/boards/haswell.c b/sound/soc/intel/boards/haswell.c
index 3dadf9b..74af090 100644
--- a/sound/soc/intel/boards/haswell.c
+++ b/sound/soc/intel/boards/haswell.c
@@ -56,7 +56,7 @@ static int haswell_rt5640_hw_params(struct snd_pcm_substream *substream,
 	struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	int ret;
 
 	ret = snd_soc_dai_set_sysclk(codec_dai, RT5640_SCLK_S_MCLK, 12288000,
@@ -162,7 +162,6 @@ static struct snd_soc_dai_link haswell_rt5640_dais[] = {
 		.no_pcm = 1,
 		.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
 			SND_SOC_DAIFMT_CBS_CFS,
-		.ignore_suspend = 1,
 		.ignore_pmdown_time = 1,
 		.be_hw_params_fixup = haswell_ssp0_fixup,
 		.ops = &haswell_rt5640_ops,
@@ -193,7 +192,7 @@ static int haswell_audio_probe(struct platform_device *pdev)
 	haswell_rt5640.dev = &pdev->dev;
 
 	/* override plaform name, if required */
-	mach = (&pdev->dev)->platform_data;
+	mach = pdev->dev.platform_data;
 	ret = snd_soc_fixup_dai_links_platform_name(&haswell_rt5640,
 						    mach->mach_params.platform);
 	if (ret)
diff --git a/sound/soc/intel/boards/kbl_da7219_max98357a.c b/sound/soc/intel/boards/kbl_da7219_max98357a.c
index bc7f9a9..32cd90b 100644
--- a/sound/soc/intel/boards/kbl_da7219_max98357a.c
+++ b/sound/soc/intel/boards/kbl_da7219_max98357a.c
@@ -159,8 +159,8 @@ static int kabylake_ssp_fixup(struct snd_soc_pcm_runtime *rtd,
 static int kabylake_da7219_codec_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct kbl_codec_private *ctx = snd_soc_card_get_drvdata(rtd->card);
-	struct snd_soc_component *component = rtd->codec_dai->component;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_component *component = asoc_rtd_to_codec(rtd, 0)->component;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	struct snd_soc_jack *jack;
 	int ret;
 
@@ -203,7 +203,7 @@ static int kabylake_da7219_codec_init(struct snd_soc_pcm_runtime *rtd)
 static int kabylake_hdmi_init(struct snd_soc_pcm_runtime *rtd, int device)
 {
 	struct kbl_codec_private *ctx = snd_soc_card_get_drvdata(rtd->card);
-	struct snd_soc_dai *dai = rtd->codec_dai;
+	struct snd_soc_dai *dai = asoc_rtd_to_codec(rtd, 0);
 	struct kbl_hdmi_pcm *pcm;
 
 	pcm = devm_kzalloc(rtd->card->dev, sizeof(*pcm), GFP_KERNEL);
@@ -236,7 +236,7 @@ static int kabylake_hdmi3_init(struct snd_soc_pcm_runtime *rtd)
 static int kabylake_da7219_fe_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct snd_soc_dapm_context *dapm;
-	struct snd_soc_component *component = rtd->cpu_dai->component;
+	struct snd_soc_component *component = asoc_rtd_to_cpu(rtd, 0)->component;
 
 	dapm = snd_soc_component_get_dapm(component);
 	snd_soc_dapm_ignore_suspend(dapm, "Reference Capture");
diff --git a/sound/soc/intel/boards/kbl_da7219_max98927.c b/sound/soc/intel/boards/kbl_da7219_max98927.c
index 7a13e9b..abd4e38 100644
--- a/sound/soc/intel/boards/kbl_da7219_max98927.c
+++ b/sound/soc/intel/boards/kbl_da7219_max98927.c
@@ -176,10 +176,10 @@ static int kabylake_ssp0_hw_params(struct snd_pcm_substream *substream,
 	struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *runtime = substream->private_data;
+	struct snd_soc_dai *codec_dai;
 	int ret, j;
 
-	for (j = 0; j < runtime->num_codecs; j++) {
-		struct snd_soc_dai *codec_dai = runtime->codec_dais[j];
+	for_each_rtd_codec_dais(runtime, j, codec_dai) {
 
 		if (!strcmp(codec_dai->component->name, MAX98927_DEV0_NAME)) {
 			ret = snd_soc_dai_set_tdm_slot(codec_dai, 0x30, 3, 8, 16);
@@ -221,10 +221,10 @@ static int kabylake_ssp0_hw_params(struct snd_pcm_substream *substream,
 static int kabylake_ssp0_trigger(struct snd_pcm_substream *substream, int cmd)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai;
 	int j, ret;
 
-	for (j = 0; j < rtd->num_codecs; j++) {
-		struct snd_soc_dai *codec_dai = rtd->codec_dais[j];
+	for_each_rtd_codec_dais(rtd, j, codec_dai) {
 		const char *name = codec_dai->component->name;
 		struct snd_soc_component *component = codec_dai->component;
 		struct snd_soc_dapm_context *dapm =
@@ -331,7 +331,7 @@ static int kabylake_ssp_fixup(struct snd_soc_pcm_runtime *rtd,
 static int kabylake_da7219_codec_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct kbl_codec_private *ctx = snd_soc_card_get_drvdata(rtd->card);
-	struct snd_soc_component *component = rtd->codec_dai->component;
+	struct snd_soc_component *component = asoc_rtd_to_codec(rtd, 0)->component;
 	struct snd_soc_jack *jack;
 	struct snd_soc_card *card = rtd->card;
 	int ret;
@@ -381,7 +381,7 @@ static int kabylake_dmic_init(struct snd_soc_pcm_runtime *rtd)
 static int kabylake_hdmi_init(struct snd_soc_pcm_runtime *rtd, int device)
 {
 	struct kbl_codec_private *ctx = snd_soc_card_get_drvdata(rtd->card);
-	struct snd_soc_dai *dai = rtd->codec_dai;
+	struct snd_soc_dai *dai = asoc_rtd_to_codec(rtd, 0);
 	struct kbl_hdmi_pcm *pcm;
 
 	pcm = devm_kzalloc(rtd->card->dev, sizeof(*pcm), GFP_KERNEL);
@@ -414,7 +414,7 @@ static int kabylake_hdmi3_init(struct snd_soc_pcm_runtime *rtd)
 static int kabylake_da7219_fe_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct snd_soc_dapm_context *dapm;
-	struct snd_soc_component *component = rtd->cpu_dai->component;
+	struct snd_soc_component *component = asoc_rtd_to_cpu(rtd, 0)->component;
 
 	dapm = snd_soc_component_get_dapm(component);
 	snd_soc_dapm_ignore_suspend(dapm, "Reference Capture");
diff --git a/sound/soc/intel/boards/kbl_rt5660.c b/sound/soc/intel/boards/kbl_rt5660.c
index e23dea9..6460e3f 100644
--- a/sound/soc/intel/boards/kbl_rt5660.c
+++ b/sound/soc/intel/boards/kbl_rt5660.c
@@ -157,7 +157,7 @@ static int kabylake_rt5660_codec_init(struct snd_soc_pcm_runtime *rtd)
 {
 	int ret;
 	struct kbl_codec_private *ctx = snd_soc_card_get_drvdata(rtd->card);
-	struct snd_soc_component *component = rtd->codec_dai->component;
+	struct snd_soc_component *component = asoc_rtd_to_codec(rtd, 0)->component;
 	struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
 
 	ret = devm_acpi_dev_add_driver_gpios(component->dev, acpi_rt5660_gpios);
@@ -210,7 +210,7 @@ static int kabylake_rt5660_codec_init(struct snd_soc_pcm_runtime *rtd)
 static int kabylake_hdmi_init(struct snd_soc_pcm_runtime *rtd, int device)
 {
 	struct kbl_codec_private *ctx = snd_soc_card_get_drvdata(rtd->card);
-	struct snd_soc_dai *dai = rtd->codec_dai;
+	struct snd_soc_dai *dai = asoc_rtd_to_codec(rtd, 0);
 	struct kbl_hdmi_pcm *pcm;
 
 	pcm = devm_kzalloc(rtd->card->dev, sizeof(*pcm), GFP_KERNEL);
@@ -244,7 +244,7 @@ static int kabylake_rt5660_hw_params(struct snd_pcm_substream *substream,
 	struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	int ret;
 
 	ret = snd_soc_dai_set_sysclk(codec_dai,
diff --git a/sound/soc/intel/boards/kbl_rt5663_max98927.c b/sound/soc/intel/boards/kbl_rt5663_max98927.c
index d8f2ff7..658a9da 100644
--- a/sound/soc/intel/boards/kbl_rt5663_max98927.c
+++ b/sound/soc/intel/boards/kbl_rt5663_max98927.c
@@ -242,7 +242,7 @@ static int kabylake_rt5663_fe_init(struct snd_soc_pcm_runtime *rtd)
 {
 	int ret;
 	struct snd_soc_dapm_context *dapm;
-	struct snd_soc_component *component = rtd->cpu_dai->component;
+	struct snd_soc_component *component = asoc_rtd_to_cpu(rtd, 0)->component;
 
 	dapm = snd_soc_component_get_dapm(component);
 	ret = snd_soc_dapm_ignore_suspend(dapm, "Reference Capture");
@@ -258,7 +258,7 @@ static int kabylake_rt5663_codec_init(struct snd_soc_pcm_runtime *rtd)
 {
 	int ret;
 	struct kbl_rt5663_private *ctx = snd_soc_card_get_drvdata(rtd->card);
-	struct snd_soc_component *component = rtd->codec_dai->component;
+	struct snd_soc_component *component = asoc_rtd_to_codec(rtd, 0)->component;
 	struct snd_soc_jack *jack;
 
 	/*
@@ -305,7 +305,7 @@ static int kabylake_rt5663_max98927_codec_init(struct snd_soc_pcm_runtime *rtd)
 static int kabylake_hdmi_init(struct snd_soc_pcm_runtime *rtd, int device)
 {
 	struct kbl_rt5663_private *ctx = snd_soc_card_get_drvdata(rtd->card);
-	struct snd_soc_dai *dai = rtd->codec_dai;
+	struct snd_soc_dai *dai = asoc_rtd_to_codec(rtd, 0);
 	struct kbl_hdmi_pcm *pcm;
 
 	pcm = devm_kzalloc(rtd->card->dev, sizeof(*pcm), GFP_KERNEL);
@@ -431,7 +431,7 @@ static int kabylake_rt5663_hw_params(struct snd_pcm_substream *substream,
 	struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	int ret;
 
 	/* use ASRC for internal clocks, as PLL rate isn't multiple of BCLK */
@@ -472,7 +472,7 @@ static int kabylake_ssp0_hw_params(struct snd_pcm_substream *substream,
 	struct snd_soc_dai *codec_dai;
 	int ret = 0, j;
 
-	for_each_rtd_codec_dai(rtd, j, codec_dai) {
+	for_each_rtd_codec_dais(rtd, j, codec_dai) {
 		if (!strcmp(codec_dai->component->name, MAXIM_DEV0_NAME)) {
 			/*
 			 * Use channel 4 and 5 for the first amp
@@ -962,7 +962,7 @@ static int kabylake_audio_probe(struct platform_device *pdev)
 	kabylake_audio_card->dev = &pdev->dev;
 	snd_soc_card_set_drvdata(kabylake_audio_card, ctx);
 
-	mach = (&pdev->dev)->platform_data;
+	mach = pdev->dev.platform_data;
 	if (mach)
 		dmic_constraints = mach->mach_params.dmic_num == 2 ?
 			&constraints_dmic_2ch : &constraints_dmic_channels;
diff --git a/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c b/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c
index 96c814f..1b1f8d7 100644
--- a/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c
+++ b/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c
@@ -206,7 +206,7 @@ static struct snd_soc_codec_conf max98927_codec_conf[] = {
 static int kabylake_rt5663_fe_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct snd_soc_dapm_context *dapm;
-	struct snd_soc_component *component = rtd->cpu_dai->component;
+	struct snd_soc_component *component = asoc_rtd_to_cpu(rtd, 0)->component;
 	int ret;
 
 	dapm = snd_soc_component_get_dapm(component);
@@ -221,7 +221,7 @@ static int kabylake_rt5663_codec_init(struct snd_soc_pcm_runtime *rtd)
 {
 	int ret;
 	struct kbl_codec_private *ctx = snd_soc_card_get_drvdata(rtd->card);
-	struct snd_soc_component *component = rtd->codec_dai->component;
+	struct snd_soc_component *component = asoc_rtd_to_codec(rtd, 0)->component;
 	struct snd_soc_jack *jack;
 
 	/*
@@ -255,7 +255,7 @@ static int kabylake_rt5663_codec_init(struct snd_soc_pcm_runtime *rtd)
 static int kabylake_hdmi_init(struct snd_soc_pcm_runtime *rtd, int device)
 {
 	struct kbl_codec_private *ctx = snd_soc_card_get_drvdata(rtd->card);
-	struct snd_soc_dai *dai = rtd->codec_dai;
+	struct snd_soc_dai *dai = asoc_rtd_to_codec(rtd, 0);
 	struct kbl_hdmi_pcm *pcm;
 
 	pcm = devm_kzalloc(rtd->card->dev, sizeof(*pcm), GFP_KERNEL);
@@ -372,7 +372,7 @@ static int kabylake_rt5663_hw_params(struct snd_pcm_substream *substream,
 	struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	int ret;
 
 	/* use ASRC for internal clocks, as PLL rate isn't multiple of BCLK */
@@ -399,7 +399,7 @@ static int kabylake_ssp0_hw_params(struct snd_pcm_substream *substream,
 	struct snd_soc_dai *codec_dai;
 	int ret = 0, j;
 
-	for_each_rtd_codec_dai(rtd, j, codec_dai) {
+	for_each_rtd_codec_dais(rtd, j, codec_dai) {
 		if (!strcmp(codec_dai->component->name, RT5514_DEV_NAME)) {
 			ret = snd_soc_dai_set_tdm_slot(codec_dai, 0xF, 0, 8, 16);
 			if (ret < 0) {
@@ -772,7 +772,7 @@ static int kabylake_audio_probe(struct platform_device *pdev)
 	kabylake_audio_card.dev = &pdev->dev;
 	snd_soc_card_set_drvdata(&kabylake_audio_card, ctx);
 
-	mach = (&pdev->dev)->platform_data;
+	mach = pdev->dev.platform_data;
 	if (mach)
 		dmic_constraints = mach->mach_params.dmic_num == 2 ?
 			&constraints_dmic_2ch : &constraints_dmic_channels;
diff --git a/sound/soc/intel/boards/skl_hda_dsp_common.h b/sound/soc/intel/boards/skl_hda_dsp_common.h
index d615067..e8545d1 100644
--- a/sound/soc/intel/boards/skl_hda_dsp_common.h
+++ b/sound/soc/intel/boards/skl_hda_dsp_common.h
@@ -49,6 +49,10 @@ static inline int skl_hda_hdmi_build_controls(struct snd_soc_card *card)
 	struct snd_soc_component *component;
 	struct skl_hda_hdmi_pcm *pcm;
 
+	/* HDMI disabled, do not create controls */
+	if (list_empty(&ctx->hdmi_pcm_list))
+		return 0;
+
 	pcm = list_first_entry(&ctx->hdmi_pcm_list, struct skl_hda_hdmi_pcm,
 			       head);
 	component = pcm->codec_dai->component;
diff --git a/sound/soc/intel/boards/skl_hda_dsp_generic.c b/sound/soc/intel/boards/skl_hda_dsp_generic.c
index 11eaee9..3be7642 100644
--- a/sound/soc/intel/boards/skl_hda_dsp_generic.c
+++ b/sound/soc/intel/boards/skl_hda_dsp_generic.c
@@ -61,6 +61,9 @@ static const struct snd_soc_dapm_route skl_hda_map[] = {
 	{ "Alt Analog CPU Capture", NULL, "Alt Analog Codec Capture" },
 };
 
+SND_SOC_DAILINK_DEF(dummy_codec,
+	DAILINK_COMP_ARRAY(COMP_CODEC("snd-soc-dummy", "snd-soc-dummy-dai")));
+
 static int skl_hda_card_late_probe(struct snd_soc_card *card)
 {
 	return skl_hda_hdmi_jack_init(card);
@@ -114,13 +117,19 @@ static int skl_hda_fill_card_info(struct snd_soc_acpi_mach_params *mach_params)
 {
 	struct snd_soc_card *card = &hda_soc_card;
 	struct snd_soc_dai_link *dai_link;
-	u32 codec_count, codec_mask;
+	u32 codec_count, codec_mask, idisp_mask;
 	int i, num_links, num_route;
 
 	codec_mask = mach_params->codec_mask;
 	codec_count = hweight_long(codec_mask);
+	idisp_mask = codec_mask & IDISP_CODEC_MASK;
 
-	if (codec_count == 1 && codec_mask & IDISP_CODEC_MASK) {
+	if (!codec_count || codec_count > 2 ||
+	    (codec_count == 2 && !idisp_mask))
+		return -EINVAL;
+
+	if (codec_mask == idisp_mask) {
+		/* topology with iDisp as the only HDA codec */
 		num_links = IDISP_DAI_COUNT + DMIC_DAI_COUNT;
 		num_route = IDISP_ROUTE_COUNT;
 
@@ -135,13 +144,19 @@ static int skl_hda_fill_card_info(struct snd_soc_acpi_mach_params *mach_params)
 				skl_hda_be_dai_links[IDISP_DAI_COUNT +
 					HDAC_DAI_COUNT + i];
 		}
-	} else if (codec_count == 2 && codec_mask & IDISP_CODEC_MASK) {
+	} else {
+		/* topology with external and iDisp HDA codecs */
 		num_links = ARRAY_SIZE(skl_hda_be_dai_links);
 		num_route = ARRAY_SIZE(skl_hda_map);
 		card->dapm_widgets = skl_hda_widgets;
 		card->num_dapm_widgets = ARRAY_SIZE(skl_hda_widgets);
-	} else {
-		return -EINVAL;
+		if (!idisp_mask) {
+			for (i = 0; i < IDISP_DAI_COUNT; i++) {
+				skl_hda_be_dai_links[i].codecs = dummy_codec;
+				skl_hda_be_dai_links[i].num_codecs =
+					ARRAY_SIZE(dummy_codec);
+			}
+		}
 	}
 
 	card->num_links = num_links;
@@ -167,7 +182,7 @@ static int skl_hda_audio_probe(struct platform_device *pdev)
 
 	INIT_LIST_HEAD(&ctx->hdmi_pcm_list);
 
-	mach = (&pdev->dev)->platform_data;
+	mach = pdev->dev.platform_data;
 	if (!mach)
 		return -EINVAL;
 
diff --git a/sound/soc/intel/boards/skl_nau88l25_max98357a.c b/sound/soc/intel/boards/skl_nau88l25_max98357a.c
index e6de3b2..d7b8154 100644
--- a/sound/soc/intel/boards/skl_nau88l25_max98357a.c
+++ b/sound/soc/intel/boards/skl_nau88l25_max98357a.c
@@ -157,7 +157,7 @@ static int skylake_ssp_fixup(struct snd_soc_pcm_runtime *rtd,
 static int skylake_nau8825_codec_init(struct snd_soc_pcm_runtime *rtd)
 {
 	int ret;
-	struct snd_soc_component *component = rtd->codec_dai->component;
+	struct snd_soc_component *component = asoc_rtd_to_codec(rtd, 0)->component;
 
 	/*
 	 * Headset buttons map to the google Reference headset.
@@ -182,7 +182,7 @@ static int skylake_nau8825_codec_init(struct snd_soc_pcm_runtime *rtd)
 static int skylake_hdmi1_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct skl_nau8825_private *ctx = snd_soc_card_get_drvdata(rtd->card);
-	struct snd_soc_dai *dai = rtd->codec_dai;
+	struct snd_soc_dai *dai = asoc_rtd_to_codec(rtd, 0);
 	struct skl_hdmi_pcm *pcm;
 
 	pcm = devm_kzalloc(rtd->card->dev, sizeof(*pcm), GFP_KERNEL);
@@ -200,7 +200,7 @@ static int skylake_hdmi1_init(struct snd_soc_pcm_runtime *rtd)
 static int skylake_hdmi2_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct skl_nau8825_private *ctx = snd_soc_card_get_drvdata(rtd->card);
-	struct snd_soc_dai *dai = rtd->codec_dai;
+	struct snd_soc_dai *dai = asoc_rtd_to_codec(rtd, 0);
 	struct skl_hdmi_pcm *pcm;
 
 	pcm = devm_kzalloc(rtd->card->dev, sizeof(*pcm), GFP_KERNEL);
@@ -218,7 +218,7 @@ static int skylake_hdmi2_init(struct snd_soc_pcm_runtime *rtd)
 static int skylake_hdmi3_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct skl_nau8825_private *ctx = snd_soc_card_get_drvdata(rtd->card);
-	struct snd_soc_dai *dai = rtd->codec_dai;
+	struct snd_soc_dai *dai = asoc_rtd_to_codec(rtd, 0);
 	struct skl_hdmi_pcm *pcm;
 
 	pcm = devm_kzalloc(rtd->card->dev, sizeof(*pcm), GFP_KERNEL);
@@ -236,7 +236,7 @@ static int skylake_hdmi3_init(struct snd_soc_pcm_runtime *rtd)
 static int skylake_nau8825_fe_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct snd_soc_dapm_context *dapm;
-	struct snd_soc_component *component = rtd->cpu_dai->component;
+	struct snd_soc_component *component = asoc_rtd_to_cpu(rtd, 0)->component;
 
 	dapm = snd_soc_component_get_dapm(component);
 	snd_soc_dapm_ignore_suspend(dapm, "Reference Capture");
@@ -296,7 +296,7 @@ static int skylake_nau8825_hw_params(struct snd_pcm_substream *substream,
 	struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	int ret;
 
 	ret = snd_soc_dai_set_sysclk(codec_dai,
@@ -660,7 +660,7 @@ static int skylake_audio_probe(struct platform_device *pdev)
 	skylake_audio_card.dev = &pdev->dev;
 	snd_soc_card_set_drvdata(&skylake_audio_card, ctx);
 
-	mach = (&pdev->dev)->platform_data;
+	mach = pdev->dev.platform_data;
 	if (mach)
 		dmic_constraints = mach->mach_params.dmic_num == 2 ?
 			&constraints_dmic_2ch : &constraints_dmic_channels;
diff --git a/sound/soc/intel/boards/skl_nau88l25_ssm4567.c b/sound/soc/intel/boards/skl_nau88l25_ssm4567.c
index c99c8b2..4b317bc 100644
--- a/sound/soc/intel/boards/skl_nau88l25_ssm4567.c
+++ b/sound/soc/intel/boards/skl_nau88l25_ssm4567.c
@@ -161,12 +161,12 @@ static int skylake_ssm4567_codec_init(struct snd_soc_pcm_runtime *rtd)
 	int ret;
 
 	/* Slot 1 for left */
-	ret = snd_soc_dai_set_tdm_slot(rtd->codec_dais[0], 0x01, 0x01, 2, 48);
+	ret = snd_soc_dai_set_tdm_slot(asoc_rtd_to_codec(rtd, 0), 0x01, 0x01, 2, 48);
 	if (ret < 0)
 		return ret;
 
 	/* Slot 2 for right */
-	ret = snd_soc_dai_set_tdm_slot(rtd->codec_dais[1], 0x02, 0x02, 2, 48);
+	ret = snd_soc_dai_set_tdm_slot(asoc_rtd_to_codec(rtd, 1), 0x02, 0x02, 2, 48);
 	if (ret < 0)
 		return ret;
 
@@ -176,7 +176,7 @@ static int skylake_ssm4567_codec_init(struct snd_soc_pcm_runtime *rtd)
 static int skylake_nau8825_codec_init(struct snd_soc_pcm_runtime *rtd)
 {
 	int ret;
-	struct snd_soc_component *component = rtd->codec_dai->component;
+	struct snd_soc_component *component = asoc_rtd_to_codec(rtd, 0)->component;
 
 	/*
 	 * 4 buttons here map to the google Reference headset
@@ -201,7 +201,7 @@ static int skylake_nau8825_codec_init(struct snd_soc_pcm_runtime *rtd)
 static int skylake_hdmi1_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct skl_nau88125_private *ctx = snd_soc_card_get_drvdata(rtd->card);
-	struct snd_soc_dai *dai = rtd->codec_dai;
+	struct snd_soc_dai *dai = asoc_rtd_to_codec(rtd, 0);
 	struct skl_hdmi_pcm *pcm;
 
 	pcm = devm_kzalloc(rtd->card->dev, sizeof(*pcm), GFP_KERNEL);
@@ -219,7 +219,7 @@ static int skylake_hdmi1_init(struct snd_soc_pcm_runtime *rtd)
 static int skylake_hdmi2_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct skl_nau88125_private *ctx = snd_soc_card_get_drvdata(rtd->card);
-	struct snd_soc_dai *dai = rtd->codec_dai;
+	struct snd_soc_dai *dai = asoc_rtd_to_codec(rtd, 0);
 	struct skl_hdmi_pcm *pcm;
 
 	pcm = devm_kzalloc(rtd->card->dev, sizeof(*pcm), GFP_KERNEL);
@@ -238,7 +238,7 @@ static int skylake_hdmi2_init(struct snd_soc_pcm_runtime *rtd)
 static int skylake_hdmi3_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct skl_nau88125_private *ctx = snd_soc_card_get_drvdata(rtd->card);
-	struct snd_soc_dai *dai = rtd->codec_dai;
+	struct snd_soc_dai *dai = asoc_rtd_to_codec(rtd, 0);
 	struct skl_hdmi_pcm *pcm;
 
 	pcm = devm_kzalloc(rtd->card->dev, sizeof(*pcm), GFP_KERNEL);
@@ -256,7 +256,7 @@ static int skylake_hdmi3_init(struct snd_soc_pcm_runtime *rtd)
 static int skylake_nau8825_fe_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct snd_soc_dapm_context *dapm;
-	struct snd_soc_component *component = rtd->cpu_dai->component;
+	struct snd_soc_component *component = asoc_rtd_to_cpu(rtd, 0)->component;
 
 	dapm = snd_soc_component_get_dapm(component);
 	snd_soc_dapm_ignore_suspend(dapm, "Reference Capture");
@@ -348,7 +348,7 @@ static int skylake_nau8825_hw_params(struct snd_pcm_substream *substream,
 	struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	int ret;
 
 	ret = snd_soc_dai_set_sysclk(codec_dai,
@@ -686,6 +686,7 @@ static struct snd_soc_card skylake_audio_card = {
 	.codec_conf = ssm4567_codec_conf,
 	.num_configs = ARRAY_SIZE(ssm4567_codec_conf),
 	.fully_routed = true,
+	.disable_route_checks = true,
 	.late_probe = skylake_card_late_probe,
 };
 
@@ -703,7 +704,7 @@ static int skylake_audio_probe(struct platform_device *pdev)
 	skylake_audio_card.dev = &pdev->dev;
 	snd_soc_card_set_drvdata(&skylake_audio_card, ctx);
 
-	mach = (&pdev->dev)->platform_data;
+	mach = pdev->dev.platform_data;
 	if (mach)
 		dmic_constraints = mach->mach_params.dmic_num == 2 ?
 			&constraints_dmic_2ch : &constraints_dmic_channels;
diff --git a/sound/soc/intel/boards/skl_rt286.c b/sound/soc/intel/boards/skl_rt286.c
index a9aec66..903ae1b 100644
--- a/sound/soc/intel/boards/skl_rt286.c
+++ b/sound/soc/intel/boards/skl_rt286.c
@@ -112,7 +112,7 @@ static const struct snd_soc_dapm_route skylake_rt286_map[] = {
 static int skylake_rt286_fe_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct snd_soc_dapm_context *dapm;
-	struct snd_soc_component *component = rtd->cpu_dai->component;
+	struct snd_soc_component *component = asoc_rtd_to_cpu(rtd, 0)->component;
 
 	dapm = snd_soc_component_get_dapm(component);
 	snd_soc_dapm_ignore_suspend(dapm, "Reference Capture");
@@ -122,7 +122,7 @@ static int skylake_rt286_fe_init(struct snd_soc_pcm_runtime *rtd)
 
 static int skylake_rt286_codec_init(struct snd_soc_pcm_runtime *rtd)
 {
-	struct snd_soc_component *component = rtd->codec_dai->component;
+	struct snd_soc_component *component = asoc_rtd_to_codec(rtd, 0)->component;
 	int ret;
 
 	ret = snd_soc_card_jack_new(rtd->card, "Headset",
@@ -143,7 +143,7 @@ static int skylake_rt286_codec_init(struct snd_soc_pcm_runtime *rtd)
 static int skylake_hdmi_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct skl_rt286_private *ctx = snd_soc_card_get_drvdata(rtd->card);
-	struct snd_soc_dai *dai = rtd->codec_dai;
+	struct snd_soc_dai *dai = asoc_rtd_to_codec(rtd, 0);
 	struct skl_hdmi_pcm *pcm;
 
 	pcm = devm_kzalloc(rtd->card->dev, sizeof(*pcm), GFP_KERNEL);
@@ -229,7 +229,7 @@ static int skylake_rt286_hw_params(struct snd_pcm_substream *substream,
 	struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	int ret;
 
 	ret = snd_soc_dai_set_sysclk(codec_dai, RT286_SCLK_S_PLL, 24000000,
diff --git a/sound/soc/intel/boards/sof_da7219_max98373.c b/sound/soc/intel/boards/sof_da7219_max98373.c
index 8f44f13..b707dd3b 100644
--- a/sound/soc/intel/boards/sof_da7219_max98373.c
+++ b/sound/soc/intel/boards/sof_da7219_max98373.c
@@ -2,7 +2,7 @@
 // Copyright(c) 2019 Intel Corporation.
 
 /*
- * Intel SOF Machine driver for DA7219 + MAX98373 codec
+ * Intel SOF Machine driver for DA7219 + MAX98373/MAX98360A codec
  */
 
 #include <linux/input.h>
@@ -69,11 +69,20 @@ static const struct snd_kcontrol_new controls[] = {
 	SOC_DAPM_PIN_SWITCH("Right Spk"),
 };
 
+static const struct snd_kcontrol_new m98360a_controls[] = {
+	SOC_DAPM_PIN_SWITCH("Headphone Jack"),
+	SOC_DAPM_PIN_SWITCH("Headset Mic"),
+	SOC_DAPM_PIN_SWITCH("Spk"),
+};
+
+/* For MAX98373 amp */
 static const struct snd_soc_dapm_widget widgets[] = {
 	SND_SOC_DAPM_HP("Headphone Jack", NULL),
 	SND_SOC_DAPM_MIC("Headset Mic", NULL),
+
 	SND_SOC_DAPM_SPK("Left Spk", NULL),
 	SND_SOC_DAPM_SPK("Right Spk", NULL),
+
 	SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0,
 			    platform_clock_control, SND_SOC_DAPM_POST_PMD |
 			    SND_SOC_DAPM_PRE_PMU),
@@ -83,21 +92,45 @@ static const struct snd_soc_dapm_route audio_map[] = {
 	{ "Headphone Jack", NULL, "HPL" },
 	{ "Headphone Jack", NULL, "HPR" },
 
+	{ "MIC", NULL, "Headset Mic" },
+
+	{ "Headphone Jack", NULL, "Platform Clock" },
+	{ "Headset Mic", NULL, "Platform Clock" },
+
 	{ "Left Spk", NULL, "Left BE_OUT" },
 	{ "Right Spk", NULL, "Right BE_OUT" },
+};
+
+/* For MAX98360A amp */
+static const struct snd_soc_dapm_widget max98360a_widgets[] = {
+	SND_SOC_DAPM_HP("Headphone Jack", NULL),
+	SND_SOC_DAPM_MIC("Headset Mic", NULL),
+
+	SND_SOC_DAPM_SPK("Spk", NULL),
+
+	SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0,
+			    platform_clock_control, SND_SOC_DAPM_POST_PMD |
+			    SND_SOC_DAPM_PRE_PMU),
+};
+
+static const struct snd_soc_dapm_route max98360a_map[] = {
+	{ "Headphone Jack", NULL, "HPL" },
+	{ "Headphone Jack", NULL, "HPR" },
 
 	{ "MIC", NULL, "Headset Mic" },
 
 	{ "Headphone Jack", NULL, "Platform Clock" },
 	{ "Headset Mic", NULL, "Platform Clock" },
+
+	{"Spk", NULL, "Speaker"},
 };
 
 static struct snd_soc_jack headset;
 
 static int da7219_codec_init(struct snd_soc_pcm_runtime *rtd)
 {
-	struct snd_soc_component *component = rtd->codec_dai->component;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_component *component = codec_dai->component;
 	struct snd_soc_jack *jack;
 	int ret;
 
@@ -140,7 +173,7 @@ static int ssp1_hw_params(struct snd_pcm_substream *substream,
 	int ret, j;
 
 	for (j = 0; j < runtime->num_codecs; j++) {
-		struct snd_soc_dai *codec_dai = runtime->codec_dais[j];
+		struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(runtime, j);
 
 		if (!strcmp(codec_dai->component->name, MAXIM_DEV0_NAME)) {
 			/* vmon_slot_no = 0 imon_slot_no = 1 for TX slots */
@@ -181,7 +214,7 @@ static struct snd_soc_codec_conf max98373_codec_conf[] = {
 static int hdmi_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct card_private *ctx = snd_soc_card_get_drvdata(rtd->card);
-	struct snd_soc_dai *dai = rtd->codec_dai;
+	struct snd_soc_dai *dai = asoc_rtd_to_codec(rtd, 0);
 	struct hdmi_pcm *pcm;
 
 	pcm = devm_kzalloc(rtd->card->dev, sizeof(*pcm), GFP_KERNEL);
@@ -224,6 +257,9 @@ SND_SOC_DAILINK_DEF(ssp1_amps,
 	/* Left */	COMP_CODEC(MAXIM_DEV0_NAME, MAX98373_CODEC_DAI),
 	/* Right */	COMP_CODEC(MAXIM_DEV1_NAME, MAX98373_CODEC_DAI)));
 
+SND_SOC_DAILINK_DEF(ssp1_m98360a,
+	DAILINK_COMP_ARRAY(COMP_CODEC("MX98360A:00", "HiFi")));
+
 SND_SOC_DAILINK_DEF(dmic_pin,
 	DAILINK_COMP_ARRAY(COMP_CPU("DMIC01 Pin")));
 SND_SOC_DAILINK_DEF(dmic_codec,
@@ -320,6 +356,21 @@ static struct snd_soc_card card_da7219_m98373 = {
 	.late_probe = card_late_probe,
 };
 
+static struct snd_soc_card card_da7219_m98360a = {
+	.name = "da7219max98360a",
+	.owner = THIS_MODULE,
+	.dai_link = dais,
+	.num_links = ARRAY_SIZE(dais),
+	.controls = m98360a_controls,
+	.num_controls = ARRAY_SIZE(m98360a_controls),
+	.dapm_widgets = max98360a_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(max98360a_widgets),
+	.dapm_routes = max98360a_map,
+	.num_dapm_routes = ARRAY_SIZE(max98360a_map),
+	.fully_routed = true,
+	.late_probe = card_late_probe,
+};
+
 static int audio_probe(struct platform_device *pdev)
 {
 	static struct snd_soc_card *card;
@@ -327,15 +378,26 @@ static int audio_probe(struct platform_device *pdev)
 	struct card_private *ctx;
 	int ret;
 
-	ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_ATOMIC);
+	ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
 	if (!ctx)
 		return -ENOMEM;
 
+	/* By default dais[0] is configured for max98373 */
+	if (!strcmp(pdev->name, "sof_da7219_max98360a")) {
+		dais[0] = (struct snd_soc_dai_link) {
+			.name = "SSP1-Codec",
+			.id = 0,
+			.no_pcm = 1,
+			.dpcm_playback = 1,
+			.ignore_pmdown_time = 1,
+			SND_SOC_DAILINK_REG(ssp1_pin, ssp1_m98360a, platform) };
+	}
+
 	INIT_LIST_HEAD(&ctx->hdmi_pcm_list);
 	card = (struct snd_soc_card *)pdev->id_entry->driver_data;
 	card->dev = &pdev->dev;
 
-	mach = (&pdev->dev)->platform_data;
+	mach = pdev->dev.platform_data;
 	ret = snd_soc_fixup_dai_links_platform_name(card,
 						    mach->mach_params.platform);
 	if (ret)
@@ -351,13 +413,17 @@ static const struct platform_device_id board_ids[] = {
 		.name = "sof_da7219_max98373",
 		.driver_data = (kernel_ulong_t)&card_da7219_m98373,
 	},
+	{
+		.name = "sof_da7219_max98360a",
+		.driver_data = (kernel_ulong_t)&card_da7219_m98360a,
+	},
 	{ }
 };
 
 static struct platform_driver audio = {
 	.probe = audio_probe,
 	.driver = {
-		.name = "sof_da7219_max98373",
+		.name = "sof_da7219_max98_360a_373",
 		.pm = &snd_soc_pm_ops,
 	},
 	.id_table = board_ids,
@@ -368,4 +434,5 @@ module_platform_driver(audio)
 MODULE_DESCRIPTION("ASoC Intel(R) SOF Machine driver");
 MODULE_AUTHOR("Yong Zhi <yong.zhi@intel.com>");
 MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:sof_da7219_max98360a");
 MODULE_ALIAS("platform:sof_da7219_max98373");
diff --git a/sound/soc/intel/boards/sof_maxim_common.c b/sound/soc/intel/boards/sof_maxim_common.c
new file mode 100644
index 0000000..463b39a
--- /dev/null
+++ b/sound/soc/intel/boards/sof_maxim_common.c
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright(c) 2020 Intel Corporation. All rights reserved.
+#include <linux/string.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dai.h>
+#include <sound/soc-dapm.h>
+#include <uapi/sound/asound.h>
+#include "sof_maxim_common.h"
+
+static const struct snd_soc_dapm_route max_98373_dapm_routes[] = {
+	/* speaker */
+	{ "Left Spk", NULL, "Left BE_OUT" },
+	{ "Right Spk", NULL, "Right BE_OUT" },
+};
+
+static struct snd_soc_codec_conf max_98373_codec_conf[] = {
+	{
+		.dlc = COMP_CODEC_CONF(MAX_98373_DEV0_NAME),
+		.name_prefix = "Right",
+	},
+	{
+		.dlc = COMP_CODEC_CONF(MAX_98373_DEV1_NAME),
+		.name_prefix = "Left",
+	},
+};
+
+struct snd_soc_dai_link_component max_98373_components[] = {
+	{  /* For Left */
+		.name = MAX_98373_DEV0_NAME,
+		.dai_name = MAX_98373_CODEC_DAI,
+	},
+	{  /* For Right */
+		.name = MAX_98373_DEV1_NAME,
+		.dai_name = MAX_98373_CODEC_DAI,
+	},
+};
+
+static int max98373_hw_params(struct snd_pcm_substream *substream,
+			      struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai;
+	int j;
+
+	for_each_rtd_codec_dais(rtd, j, codec_dai) {
+		if (!strcmp(codec_dai->component->name, MAX_98373_DEV0_NAME)) {
+			/* DEV0 tdm slot configuration */
+			snd_soc_dai_set_tdm_slot(codec_dai, 0x30, 3, 8, 16);
+		}
+		if (!strcmp(codec_dai->component->name, MAX_98373_DEV1_NAME)) {
+			/* DEV1 tdm slot configuration */
+			snd_soc_dai_set_tdm_slot(codec_dai, 0xC0, 3, 8, 16);
+		}
+	}
+	return 0;
+}
+
+struct snd_soc_ops max_98373_ops = {
+	.hw_params = max98373_hw_params,
+};
+
+int max98373_spk_codec_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_card *card = rtd->card;
+	int ret;
+
+	ret = snd_soc_dapm_add_routes(&card->dapm, max_98373_dapm_routes,
+				      ARRAY_SIZE(max_98373_dapm_routes));
+	if (ret)
+		dev_err(rtd->dev, "Speaker map addition failed: %d\n", ret);
+	return ret;
+}
+
+void sof_max98373_codec_conf(struct snd_soc_card *card)
+{
+	card->codec_conf = max_98373_codec_conf;
+	card->num_configs = ARRAY_SIZE(max_98373_codec_conf);
+}
diff --git a/sound/soc/intel/boards/sof_maxim_common.h b/sound/soc/intel/boards/sof_maxim_common.h
new file mode 100644
index 0000000..406bf0e
--- /dev/null
+++ b/sound/soc/intel/boards/sof_maxim_common.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright(c) 2020 Intel Corporation.
+ */
+
+/*
+ * This file defines data structures used in Machine Driver for Intel
+ * platforms with Maxim Codecs.
+ */
+#ifndef __SOF_MAXIM_COMMON_H
+#define __SOF_MAXIM_COMMON_H
+
+#include <sound/soc.h>
+
+#define MAX_98373_CODEC_DAI	"max98373-aif1"
+#define MAX_98373_DEV0_NAME	"i2c-MX98373:00"
+#define MAX_98373_DEV1_NAME	"i2c-MX98373:01"
+
+extern struct snd_soc_dai_link_component max_98373_components[2];
+extern struct snd_soc_ops max_98373_ops;
+
+int max98373_spk_codec_init(struct snd_soc_pcm_runtime *rtd);
+void sof_max98373_codec_conf(struct snd_soc_card *card);
+#endif /* __SOF_MAXIM_COMMON_H */
diff --git a/sound/soc/intel/boards/sof_pcm512x.c b/sound/soc/intel/boards/sof_pcm512x.c
new file mode 100644
index 0000000..fb78118
--- /dev/null
+++ b/sound/soc/intel/boards/sof_pcm512x.c
@@ -0,0 +1,448 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright(c) 2018-2020 Intel Corporation.
+
+/*
+ * Intel SOF Machine Driver for Intel platforms with TI PCM512x codec,
+ * e.g. Up or Up2 with Hifiberry DAC+ HAT
+ */
+#include <linux/clk.h>
+#include <linux/dmi.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <sound/core.h>
+#include <sound/jack.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-acpi.h>
+#include "../../codecs/pcm512x.h"
+#include "../common/soc-intel-quirks.h"
+#include "hda_dsp_common.h"
+
+#define NAME_SIZE 32
+
+#define SOF_PCM512X_SSP_CODEC(quirk)		((quirk) & GENMASK(3, 0))
+#define SOF_PCM512X_SSP_CODEC_MASK			(GENMASK(3, 0))
+
+#define IDISP_CODEC_MASK	0x4
+
+/* Default: SSP5 */
+static unsigned long sof_pcm512x_quirk = SOF_PCM512X_SSP_CODEC(5);
+
+static bool is_legacy_cpu;
+
+struct sof_hdmi_pcm {
+	struct list_head head;
+	struct snd_soc_dai *codec_dai;
+	int device;
+};
+
+struct sof_card_private {
+	struct list_head hdmi_pcm_list;
+	bool idisp_codec;
+};
+
+static int sof_pcm512x_quirk_cb(const struct dmi_system_id *id)
+{
+	sof_pcm512x_quirk = (unsigned long)id->driver_data;
+	return 1;
+}
+
+static const struct dmi_system_id sof_pcm512x_quirk_table[] = {
+	{
+		.callback = sof_pcm512x_quirk_cb,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "AAEON"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "UP-CHT01"),
+		},
+		.driver_data = (void *)(SOF_PCM512X_SSP_CODEC(2)),
+	},
+	{}
+};
+
+static int sof_hdmi_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct sof_card_private *ctx = snd_soc_card_get_drvdata(rtd->card);
+	struct snd_soc_dai *dai = asoc_rtd_to_codec(rtd, 0);
+	struct sof_hdmi_pcm *pcm;
+
+	pcm = devm_kzalloc(rtd->card->dev, sizeof(*pcm), GFP_KERNEL);
+	if (!pcm)
+		return -ENOMEM;
+
+	/* dai_link id is 1:1 mapped to the PCM device */
+	pcm->device = rtd->dai_link->id;
+	pcm->codec_dai = dai;
+
+	list_add_tail(&pcm->head, &ctx->hdmi_pcm_list);
+
+	return 0;
+}
+
+static int sof_pcm512x_codec_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_component *codec = asoc_rtd_to_codec(rtd, 0)->component;
+
+	snd_soc_component_update_bits(codec, PCM512x_GPIO_EN, 0x08, 0x08);
+	snd_soc_component_update_bits(codec, PCM512x_GPIO_OUTPUT_4, 0x0f, 0x02);
+	snd_soc_component_update_bits(codec, PCM512x_GPIO_CONTROL_1,
+				      0x08, 0x08);
+
+	return 0;
+}
+
+static int aif1_startup(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_component *codec = asoc_rtd_to_codec(rtd, 0)->component;
+
+	snd_soc_component_update_bits(codec, PCM512x_GPIO_CONTROL_1,
+				      0x08, 0x08);
+
+	return 0;
+}
+
+static void aif1_shutdown(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_component *codec = asoc_rtd_to_codec(rtd, 0)->component;
+
+	snd_soc_component_update_bits(codec, PCM512x_GPIO_CONTROL_1,
+				      0x08, 0x00);
+}
+
+static const struct snd_soc_ops sof_pcm512x_ops = {
+	.startup = aif1_startup,
+	.shutdown = aif1_shutdown,
+};
+
+static struct snd_soc_dai_link_component platform_component[] = {
+	{
+		/* name might be overridden during probe */
+		.name = "0000:00:1f.3"
+	}
+};
+
+#if IS_ENABLED(CONFIG_SND_HDA_CODEC_HDMI)
+static int sof_card_late_probe(struct snd_soc_card *card)
+{
+	struct sof_card_private *ctx = snd_soc_card_get_drvdata(card);
+	struct sof_hdmi_pcm *pcm;
+
+	/* HDMI is not supported by SOF on Baytrail/CherryTrail */
+	if (is_legacy_cpu)
+		return 0;
+
+	if (list_empty(&ctx->hdmi_pcm_list))
+		return -EINVAL;
+
+	if (!ctx->idisp_codec)
+		return 0;
+
+	pcm = list_first_entry(&ctx->hdmi_pcm_list, struct sof_hdmi_pcm, head);
+
+	return hda_dsp_hdmi_build_controls(card, pcm->codec_dai->component);
+}
+#else
+static int sof_card_late_probe(struct snd_soc_card *card)
+{
+	return 0;
+}
+#endif
+
+static const struct snd_kcontrol_new sof_controls[] = {
+	SOC_DAPM_PIN_SWITCH("Ext Spk"),
+};
+
+static const struct snd_soc_dapm_widget sof_widgets[] = {
+	SND_SOC_DAPM_SPK("Ext Spk", NULL),
+};
+
+static const struct snd_soc_dapm_widget dmic_widgets[] = {
+	SND_SOC_DAPM_MIC("SoC DMIC", NULL),
+};
+
+static const struct snd_soc_dapm_route sof_map[] = {
+	/* Speaker */
+	{"Ext Spk", NULL, "OUTR"},
+	{"Ext Spk", NULL, "OUTL"},
+};
+
+static const struct snd_soc_dapm_route dmic_map[] = {
+	/* digital mics */
+	{"DMic", NULL, "SoC DMIC"},
+};
+
+static int dmic_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_card *card = rtd->card;
+	int ret;
+
+	ret = snd_soc_dapm_new_controls(&card->dapm, dmic_widgets,
+					ARRAY_SIZE(dmic_widgets));
+	if (ret) {
+		dev_err(card->dev, "DMic widget addition failed: %d\n", ret);
+		/* Don't need to add routes if widget addition failed */
+		return ret;
+	}
+
+	ret = snd_soc_dapm_add_routes(&card->dapm, dmic_map,
+				      ARRAY_SIZE(dmic_map));
+
+	if (ret)
+		dev_err(card->dev, "DMic map addition failed: %d\n", ret);
+
+	return ret;
+}
+
+/* sof audio machine driver for pcm512x codec */
+static struct snd_soc_card sof_audio_card_pcm512x = {
+	.name = "pcm512x",
+	.owner = THIS_MODULE,
+	.controls = sof_controls,
+	.num_controls = ARRAY_SIZE(sof_controls),
+	.dapm_widgets = sof_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(sof_widgets),
+	.dapm_routes = sof_map,
+	.num_dapm_routes = ARRAY_SIZE(sof_map),
+	.fully_routed = true,
+	.late_probe = sof_card_late_probe,
+};
+
+SND_SOC_DAILINK_DEF(pcm512x_component,
+	DAILINK_COMP_ARRAY(COMP_CODEC("i2c-104C5122:00", "pcm512x-hifi")));
+SND_SOC_DAILINK_DEF(dmic_component,
+	DAILINK_COMP_ARRAY(COMP_CODEC("dmic-codec", "dmic-hifi")));
+
+static struct snd_soc_dai_link *sof_card_dai_links_create(struct device *dev,
+							  int ssp_codec,
+							  int dmic_be_num,
+							  int hdmi_num,
+							  bool idisp_codec)
+{
+	struct snd_soc_dai_link_component *idisp_components;
+	struct snd_soc_dai_link_component *cpus;
+	struct snd_soc_dai_link *links;
+	int i, id = 0;
+
+	links = devm_kcalloc(dev, sof_audio_card_pcm512x.num_links,
+			sizeof(struct snd_soc_dai_link), GFP_KERNEL);
+	cpus = devm_kcalloc(dev, sof_audio_card_pcm512x.num_links,
+			sizeof(struct snd_soc_dai_link_component), GFP_KERNEL);
+	if (!links || !cpus)
+		goto devm_err;
+
+	/* codec SSP */
+	links[id].name = devm_kasprintf(dev, GFP_KERNEL,
+					"SSP%d-Codec", ssp_codec);
+	if (!links[id].name)
+		goto devm_err;
+
+	links[id].id = id;
+	links[id].codecs = pcm512x_component;
+	links[id].num_codecs = ARRAY_SIZE(pcm512x_component);
+	links[id].platforms = platform_component;
+	links[id].num_platforms = ARRAY_SIZE(platform_component);
+	links[id].init = sof_pcm512x_codec_init;
+	links[id].ops = &sof_pcm512x_ops;
+	links[id].nonatomic = true;
+	links[id].dpcm_playback = 1;
+	/*
+	 * capture only supported with specific versions of the Hifiberry DAC+
+	 * links[id].dpcm_capture = 1;
+	 */
+	links[id].no_pcm = 1;
+	links[id].cpus = &cpus[id];
+	links[id].num_cpus = 1;
+	if (is_legacy_cpu) {
+		links[id].cpus->dai_name = devm_kasprintf(dev, GFP_KERNEL,
+							  "ssp%d-port",
+							  ssp_codec);
+		if (!links[id].cpus->dai_name)
+			goto devm_err;
+	} else {
+		links[id].cpus->dai_name = devm_kasprintf(dev, GFP_KERNEL,
+							  "SSP%d Pin",
+							  ssp_codec);
+		if (!links[id].cpus->dai_name)
+			goto devm_err;
+	}
+	id++;
+
+	/* dmic */
+	if (dmic_be_num > 0) {
+		/* at least we have dmic01 */
+		links[id].name = "dmic01";
+		links[id].cpus = &cpus[id];
+		links[id].cpus->dai_name = "DMIC01 Pin";
+		links[id].init = dmic_init;
+		if (dmic_be_num > 1) {
+			/* set up 2 BE links at most */
+			links[id + 1].name = "dmic16k";
+			links[id + 1].cpus = &cpus[id + 1];
+			links[id + 1].cpus->dai_name = "DMIC16k Pin";
+			dmic_be_num = 2;
+		}
+	}
+
+	for (i = 0; i < dmic_be_num; i++) {
+		links[id].id = id;
+		links[id].num_cpus = 1;
+		links[id].codecs = dmic_component;
+		links[id].num_codecs = ARRAY_SIZE(dmic_component);
+		links[id].platforms = platform_component;
+		links[id].num_platforms = ARRAY_SIZE(platform_component);
+		links[id].ignore_suspend = 1;
+		links[id].dpcm_capture = 1;
+		links[id].no_pcm = 1;
+		id++;
+	}
+
+	/* HDMI */
+	if (hdmi_num > 0) {
+		idisp_components = devm_kcalloc(dev, hdmi_num,
+				sizeof(struct snd_soc_dai_link_component),
+				GFP_KERNEL);
+		if (!idisp_components)
+			goto devm_err;
+	}
+	for (i = 1; i <= hdmi_num; i++) {
+		links[id].name = devm_kasprintf(dev, GFP_KERNEL,
+						"iDisp%d", i);
+		if (!links[id].name)
+			goto devm_err;
+
+		links[id].id = id;
+		links[id].cpus = &cpus[id];
+		links[id].num_cpus = 1;
+		links[id].cpus->dai_name = devm_kasprintf(dev, GFP_KERNEL,
+							  "iDisp%d Pin", i);
+		if (!links[id].cpus->dai_name)
+			goto devm_err;
+
+		/*
+		 * topology cannot be loaded if codec is missing, so
+		 * use the dummy codec if needed
+		 */
+		if (idisp_codec) {
+			idisp_components[i - 1].name = "ehdaudio0D2";
+			idisp_components[i - 1].dai_name =
+				devm_kasprintf(dev, GFP_KERNEL,
+					       "intel-hdmi-hifi%d", i);
+		} else {
+			idisp_components[i - 1].name = "snd-soc-dummy";
+			idisp_components[i - 1].dai_name = "snd-soc-dummy-dai";
+		}
+		if (!idisp_components[i - 1].dai_name)
+			goto devm_err;
+
+		links[id].codecs = &idisp_components[i - 1];
+		links[id].num_codecs = 1;
+		links[id].platforms = platform_component;
+		links[id].num_platforms = ARRAY_SIZE(platform_component);
+		links[id].init = sof_hdmi_init;
+		links[id].dpcm_playback = 1;
+		links[id].no_pcm = 1;
+		id++;
+	}
+
+	return links;
+devm_err:
+	return NULL;
+}
+
+static int sof_audio_probe(struct platform_device *pdev)
+{
+	struct snd_soc_acpi_mach *mach = pdev->dev.platform_data;
+	struct snd_soc_dai_link *dai_links;
+	struct sof_card_private *ctx;
+	int dmic_be_num, hdmi_num;
+	int ret, ssp_codec;
+
+	ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	hdmi_num = 0;
+	if (soc_intel_is_byt() || soc_intel_is_cht()) {
+		is_legacy_cpu = true;
+		dmic_be_num = 0;
+		/* default quirk for legacy cpu */
+		sof_pcm512x_quirk = SOF_PCM512X_SSP_CODEC(2);
+	} else {
+		dmic_be_num = 2;
+#if IS_ENABLED(CONFIG_SND_HDA_CODEC_HDMI)
+		if (mach->mach_params.common_hdmi_codec_drv &&
+		    (mach->mach_params.codec_mask & IDISP_CODEC_MASK))
+			ctx->idisp_codec = true;
+
+		/* links are always present in topology */
+		hdmi_num = 3;
+#endif
+	}
+
+	dmi_check_system(sof_pcm512x_quirk_table);
+
+	dev_dbg(&pdev->dev, "sof_pcm512x_quirk = %lx\n", sof_pcm512x_quirk);
+
+	ssp_codec = sof_pcm512x_quirk & SOF_PCM512X_SSP_CODEC_MASK;
+
+	/* compute number of dai links */
+	sof_audio_card_pcm512x.num_links = 1 + dmic_be_num + hdmi_num;
+
+	dai_links = sof_card_dai_links_create(&pdev->dev, ssp_codec,
+					      dmic_be_num, hdmi_num,
+					      ctx->idisp_codec);
+	if (!dai_links)
+		return -ENOMEM;
+
+	sof_audio_card_pcm512x.dai_link = dai_links;
+
+	INIT_LIST_HEAD(&ctx->hdmi_pcm_list);
+
+	sof_audio_card_pcm512x.dev = &pdev->dev;
+
+	/* set platform name for each dailink */
+	ret = snd_soc_fixup_dai_links_platform_name(&sof_audio_card_pcm512x,
+						    mach->mach_params.platform);
+	if (ret)
+		return ret;
+
+	snd_soc_card_set_drvdata(&sof_audio_card_pcm512x, ctx);
+
+	return devm_snd_soc_register_card(&pdev->dev,
+					  &sof_audio_card_pcm512x);
+}
+
+static int sof_pcm512x_remove(struct platform_device *pdev)
+{
+	struct snd_soc_card *card = platform_get_drvdata(pdev);
+	struct snd_soc_component *component = NULL;
+
+	for_each_card_components(card, component) {
+		if (!strcmp(component->name, pcm512x_component[0].name)) {
+			snd_soc_component_set_jack(component, NULL, NULL);
+			break;
+		}
+	}
+
+	return 0;
+}
+
+static struct platform_driver sof_audio = {
+	.probe = sof_audio_probe,
+	.remove = sof_pcm512x_remove,
+	.driver = {
+		.name = "sof_pcm512x",
+		.pm = &snd_soc_pm_ops,
+	},
+};
+module_platform_driver(sof_audio)
+
+MODULE_DESCRIPTION("ASoC Intel(R) SOF + PCM512x Machine driver");
+MODULE_AUTHOR("Pierre-Louis Bossart");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:sof_pcm512x");
diff --git a/sound/soc/intel/boards/sof_rt5682.c b/sound/soc/intel/boards/sof_rt5682.c
index 5d87887..8c29431 100644
--- a/sound/soc/intel/boards/sof_rt5682.c
+++ b/sound/soc/intel/boards/sof_rt5682.c
@@ -1,9 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0
-// Copyright(c) 2019 Intel Corporation.
+// Copyright(c) 2019-2020 Intel Corporation.
 
 /*
  * Intel SOF Machine Driver with Realtek rt5682 Codec
- * and speaker codec MAX98357A
+ * and speaker codec MAX98357A or RT1015.
  */
 #include <linux/i2c.h>
 #include <linux/input.h>
@@ -18,10 +18,12 @@
 #include <sound/soc.h>
 #include <sound/rt5682.h>
 #include <sound/soc-acpi.h>
+#include "../../codecs/rt1015.h"
 #include "../../codecs/rt5682.h"
 #include "../../codecs/hdac_hdmi.h"
 #include "../common/soc-intel-quirks.h"
 #include "hda_dsp_common.h"
+#include "sof_maxim_common.h"
 
 #define NAME_SIZE 32
 
@@ -39,6 +41,8 @@
 #define SOF_RT5682_NUM_HDMIDEV_MASK		(GENMASK(12, 10))
 #define SOF_RT5682_NUM_HDMIDEV(quirk)	\
 	((quirk << SOF_RT5682_NUM_HDMIDEV_SHIFT) & SOF_RT5682_NUM_HDMIDEV_MASK)
+#define SOF_RT1015_SPEAKER_AMP_PRESENT		BIT(13)
+#define SOF_MAX98373_SPEAKER_AMP_PRESENT	BIT(14)
 
 /* Default: MCLK on, MCLK 19.2M, SSP0  */
 static unsigned long sof_rt5682_quirk = SOF_RT5682_MCLK_EN |
@@ -120,7 +124,7 @@ static const struct dmi_system_id sof_rt5682_quirk_table[] = {
 static int sof_hdmi_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct sof_card_private *ctx = snd_soc_card_get_drvdata(rtd->card);
-	struct snd_soc_dai *dai = rtd->codec_dai;
+	struct snd_soc_dai *dai = asoc_rtd_to_codec(rtd, 0);
 	struct sof_hdmi_pcm *pcm;
 
 	pcm = devm_kzalloc(rtd->card->dev, sizeof(*pcm), GFP_KERNEL);
@@ -139,7 +143,7 @@ static int sof_hdmi_init(struct snd_soc_pcm_runtime *rtd)
 static int sof_rt5682_codec_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct sof_card_private *ctx = snd_soc_card_get_drvdata(rtd->card);
-	struct snd_soc_component *component = rtd->codec_dai->component;
+	struct snd_soc_component *component = asoc_rtd_to_codec(rtd, 0)->component;
 	struct snd_soc_jack *jack;
 	int ret;
 
@@ -207,7 +211,7 @@ static int sof_rt5682_hw_params(struct snd_pcm_substream *substream,
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct sof_card_private *ctx = snd_soc_card_get_drvdata(rtd->card);
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	int clk_id, clk_freq, pll_out, ret;
 
 	if (sof_rt5682_quirk & SOF_RT5682_MCLK_EN) {
@@ -260,6 +264,42 @@ static struct snd_soc_ops sof_rt5682_ops = {
 	.hw_params = sof_rt5682_hw_params,
 };
 
+static int sof_rt1015_hw_params(struct snd_pcm_substream *substream,
+				struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_card *card = rtd->card;
+	struct snd_soc_dai *codec_dai;
+	int i, ret;
+
+	if (!snd_soc_card_get_codec_dai(card, "rt1015-aif"))
+		return 0;
+
+	for_each_rtd_codec_dais(rtd, i, codec_dai) {
+		ret = snd_soc_dai_set_pll(codec_dai, 0, RT1015_PLL_S_BCLK,
+					  params_rate(params) * 50,
+					  params_rate(params) * 256);
+		if (ret < 0) {
+			dev_err(card->dev, "failed to set pll\n");
+			return ret;
+		}
+		/* Configure sysclk for codec */
+		ret = snd_soc_dai_set_sysclk(codec_dai, RT1015_SCLK_S_PLL,
+					     params_rate(params) * 256,
+					     SND_SOC_CLOCK_IN);
+		if (ret < 0) {
+			dev_err(card->dev, "failed to set sysclk\n");
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static struct snd_soc_ops sof_rt1015_ops = {
+	.hw_params = sof_rt1015_hw_params,
+};
+
 static struct snd_soc_dai_link_component platform_component[] = {
 	{
 		/* name might be overridden during probe */
@@ -316,12 +356,17 @@ static const struct snd_kcontrol_new sof_controls[] = {
 	SOC_DAPM_PIN_SWITCH("Headphone Jack"),
 	SOC_DAPM_PIN_SWITCH("Headset Mic"),
 	SOC_DAPM_PIN_SWITCH("Spk"),
+	SOC_DAPM_PIN_SWITCH("Left Spk"),
+	SOC_DAPM_PIN_SWITCH("Right Spk"),
+
 };
 
 static const struct snd_soc_dapm_widget sof_widgets[] = {
 	SND_SOC_DAPM_HP("Headphone Jack", NULL),
 	SND_SOC_DAPM_MIC("Headset Mic", NULL),
 	SND_SOC_DAPM_SPK("Spk", NULL),
+	SND_SOC_DAPM_SPK("Left Spk", NULL),
+	SND_SOC_DAPM_SPK("Right Spk", NULL),
 };
 
 static const struct snd_soc_dapm_widget dmic_widgets[] = {
@@ -342,11 +387,22 @@ static const struct snd_soc_dapm_route speaker_map[] = {
 	{ "Spk", NULL, "Speaker" },
 };
 
+static const struct snd_soc_dapm_route speaker_map_lr[] = {
+	{ "Left Spk", NULL, "Left SPO" },
+	{ "Right Spk", NULL, "Right SPO" },
+};
+
 static const struct snd_soc_dapm_route dmic_map[] = {
 	/* digital mics */
 	{"DMic", NULL, "SoC DMIC"},
 };
 
+static int speaker_codec_init_lr(struct snd_soc_pcm_runtime *rtd)
+{
+	return snd_soc_dapm_add_routes(&rtd->card->dapm, speaker_map_lr,
+				       ARRAY_SIZE(speaker_map_lr));
+}
+
 static int speaker_codec_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct snd_soc_card *card = rtd->card;
@@ -382,6 +438,17 @@ static int dmic_init(struct snd_soc_pcm_runtime *rtd)
 	return ret;
 }
 
+static struct snd_soc_codec_conf rt1015_amp_conf[] = {
+	{
+		.dlc = COMP_CODEC_CONF("i2c-10EC1015:00"),
+		.name_prefix = "Left",
+	},
+	{
+		.dlc = COMP_CODEC_CONF("i2c-10EC1015:01"),
+		.name_prefix = "Right",
+	},
+};
+
 /* sof audio machine driver for rt5682 codec */
 static struct snd_soc_card sof_audio_card_rt5682 = {
 	.name = "rt5682", /* the sof- prefix is added by the core */
@@ -417,6 +484,17 @@ static struct snd_soc_dai_link_component max98357a_component[] = {
 	}
 };
 
+static struct snd_soc_dai_link_component rt1015_components[] = {
+	{
+		.name = "i2c-10EC1015:00",
+		.dai_name = "rt1015-aif",
+	},
+	{
+		.name = "i2c-10EC1015:01",
+		.dai_name = "rt1015-aif",
+	},
+};
+
 static struct snd_soc_dai_link *sof_card_dai_links_create(struct device *dev,
 							  int ssp_codec,
 							  int ssp_amp,
@@ -556,11 +634,24 @@ static struct snd_soc_dai_link *sof_card_dai_links_create(struct device *dev,
 			goto devm_err;
 
 		links[id].id = id;
-		links[id].codecs = max98357a_component;
-		links[id].num_codecs = ARRAY_SIZE(max98357a_component);
+		if (sof_rt5682_quirk & SOF_RT1015_SPEAKER_AMP_PRESENT) {
+			links[id].codecs = rt1015_components;
+			links[id].num_codecs = ARRAY_SIZE(rt1015_components);
+			links[id].init = speaker_codec_init_lr;
+			links[id].ops = &sof_rt1015_ops;
+		} else if (sof_rt5682_quirk &
+				SOF_MAX98373_SPEAKER_AMP_PRESENT) {
+			links[id].codecs = max_98373_components;
+			links[id].num_codecs = ARRAY_SIZE(max_98373_components);
+			links[id].init = max98373_spk_codec_init;
+			links[id].ops = &max_98373_ops;
+		} else {
+			links[id].codecs = max98357a_component;
+			links[id].num_codecs = ARRAY_SIZE(max98357a_component);
+			links[id].init = speaker_codec_init;
+		}
 		links[id].platforms = platform_component;
 		links[id].num_platforms = ARRAY_SIZE(platform_component);
-		links[id].init = speaker_codec_init,
 		links[id].nonatomic = true;
 		links[id].dpcm_playback = 1;
 		links[id].no_pcm = 1;
@@ -604,7 +695,7 @@ static int sof_audio_probe(struct platform_device *pdev)
 
 	dmi_check_system(sof_rt5682_quirk_table);
 
-	mach = (&pdev->dev)->platform_data;
+	mach = pdev->dev.platform_data;
 
 	/* A speaker amp might not be present when the quirk claims one is.
 	 * Detect this via whether the machine driver match includes quirk_data.
@@ -662,6 +753,9 @@ static int sof_audio_probe(struct platform_device *pdev)
 	if (sof_rt5682_quirk & SOF_SPEAKER_AMP_PRESENT)
 		sof_audio_card_rt5682.num_links++;
 
+	if (sof_rt5682_quirk & SOF_MAX98373_SPEAKER_AMP_PRESENT)
+		sof_max98373_codec_conf(&sof_audio_card_rt5682);
+
 	dai_links = sof_card_dai_links_create(&pdev->dev, ssp_codec, ssp_amp,
 					      dmic_be_num, hdmi_num);
 	if (!dai_links)
@@ -669,6 +763,11 @@ static int sof_audio_probe(struct platform_device *pdev)
 
 	sof_audio_card_rt5682.dai_link = dai_links;
 
+	if (sof_rt5682_quirk & SOF_RT1015_SPEAKER_AMP_PRESENT) {
+		sof_audio_card_rt5682.codec_conf = rt1015_amp_conf;
+		sof_audio_card_rt5682.num_configs = ARRAY_SIZE(rt1015_amp_conf);
+	}
+
 	INIT_LIST_HEAD(&ctx->hdmi_pcm_list);
 
 	sof_audio_card_rt5682.dev = &pdev->dev;
@@ -714,6 +813,24 @@ static const struct platform_device_id board_ids[] = {
 					SOF_RT5682_SSP_AMP(1) |
 					SOF_RT5682_NUM_HDMIDEV(4)),
 	},
+	{
+		.name = "jsl_rt5682_rt1015",
+		.driver_data = (kernel_ulong_t)(SOF_RT5682_MCLK_EN |
+					SOF_RT5682_MCLK_24MHZ |
+					SOF_RT5682_SSP_CODEC(0) |
+					SOF_SPEAKER_AMP_PRESENT |
+					SOF_RT1015_SPEAKER_AMP_PRESENT |
+					SOF_RT5682_SSP_AMP(1)),
+	},
+	{
+		.name = "tgl_max98373_rt5682",
+		.driver_data = (kernel_ulong_t)(SOF_RT5682_MCLK_EN |
+					SOF_RT5682_SSP_CODEC(0) |
+					SOF_SPEAKER_AMP_PRESENT |
+					SOF_MAX98373_SPEAKER_AMP_PRESENT |
+					SOF_RT5682_SSP_AMP(1) |
+					SOF_RT5682_NUM_HDMIDEV(4)),
+	},
 	{ }
 };
 
@@ -735,3 +852,5 @@ MODULE_AUTHOR("Sathya Prakash M R <sathya.prakash.m.r@intel.com>");
 MODULE_LICENSE("GPL v2");
 MODULE_ALIAS("platform:sof_rt5682");
 MODULE_ALIAS("platform:tgl_max98357a_rt5682");
+MODULE_ALIAS("platform:jsl_rt5682_rt1015");
+MODULE_ALIAS("platform:tgl_max98373_rt5682");
diff --git a/sound/soc/intel/boards/sof_sdw.c b/sound/soc/intel/boards/sof_sdw.c
new file mode 100644
index 0000000..a64dc56
--- /dev/null
+++ b/sound/soc/intel/boards/sof_sdw.c
@@ -0,0 +1,962 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2020 Intel Corporation
+
+/*
+ *  sof_sdw - ASOC Machine driver for Intel SoundWire platforms
+ */
+
+#include <linux/device.h>
+#include <linux/dmi.h>
+#include <linux/module.h>
+#include <linux/soundwire/sdw.h>
+#include <linux/soundwire/sdw_type.h>
+#include <sound/soc.h>
+#include <sound/soc-acpi.h>
+#include "sof_sdw_common.h"
+
+unsigned long sof_sdw_quirk = SOF_RT711_JD_SRC_JD1;
+
+#define INC_ID(BE, CPU, LINK)	do { (BE)++; (CPU)++; (LINK)++; } while (0)
+
+static int sof_sdw_quirk_cb(const struct dmi_system_id *id)
+{
+	sof_sdw_quirk = (unsigned long)id->driver_data;
+	return 1;
+}
+
+static const struct dmi_system_id sof_sdw_quirk_table[] = {
+	{
+		.callback = sof_sdw_quirk_cb,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "09C6")
+		},
+		.driver_data = (void *)(SOF_RT711_JD_SRC_JD2 |
+					SOF_RT715_DAI_ID_FIX),
+	},
+	{
+		/* early version of SKU 09C6 */
+		.callback = sof_sdw_quirk_cb,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "0983")
+		},
+		.driver_data = (void *)(SOF_RT711_JD_SRC_JD2 |
+					SOF_RT715_DAI_ID_FIX),
+	},
+	{
+		.callback = sof_sdw_quirk_cb,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "098F"),
+		},
+		.driver_data = (void *)(SOF_RT711_JD_SRC_JD2 |
+					SOF_RT715_DAI_ID_FIX |
+					SOF_SDW_FOUR_SPK),
+	},
+		{
+		.callback = sof_sdw_quirk_cb,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "0990"),
+		},
+		.driver_data = (void *)(SOF_RT711_JD_SRC_JD2 |
+					SOF_RT715_DAI_ID_FIX |
+					SOF_SDW_FOUR_SPK),
+	},
+	{
+		.callback = sof_sdw_quirk_cb,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Intel Corporation"),
+			DMI_MATCH(DMI_PRODUCT_NAME,
+				  "Tiger Lake Client Platform"),
+		},
+		.driver_data = (void *)(SOF_RT711_JD_SRC_JD1 |
+				SOF_SDW_TGL_HDMI | SOF_SDW_PCH_DMIC |
+				SOF_SSP_PORT(SOF_I2S_SSP2)),
+	},
+	{
+		.callback = sof_sdw_quirk_cb,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Intel Corporation"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Ice Lake Client"),
+		},
+		.driver_data = (void *)SOF_SDW_PCH_DMIC,
+	},
+	{
+		.callback = sof_sdw_quirk_cb,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Intel Corporation"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "CometLake Client"),
+		},
+		.driver_data = (void *)SOF_SDW_PCH_DMIC,
+	},
+	{
+		.callback = sof_sdw_quirk_cb,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Google"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Volteer"),
+		},
+		.driver_data = (void *)(SOF_SDW_TGL_HDMI | SOF_SDW_PCH_DMIC),
+	},
+
+	{}
+};
+
+static struct snd_soc_codec_conf codec_conf[] = {
+	{
+		.dlc = COMP_CODEC_CONF("sdw:0:25d:711:0"),
+		.name_prefix = "rt711",
+	},
+	/* rt1308 w/ I2S connection */
+	{
+		.dlc = COMP_CODEC_CONF("i2c-10EC1308:00"),
+		.name_prefix = "rt1308-1",
+	},
+	/* rt1308 left on link 1 */
+	{
+		.dlc = COMP_CODEC_CONF("sdw:1:25d:1308:0"),
+		.name_prefix = "rt1308-1",
+	},
+	/* two 1308s on link1 with different unique id */
+	{
+		.dlc = COMP_CODEC_CONF("sdw:1:25d:1308:0:0"),
+		.name_prefix = "rt1308-1",
+	},
+	{
+		.dlc = COMP_CODEC_CONF("sdw:1:25d:1308:0:2"),
+		.name_prefix = "rt1308-2",
+	},
+	/* rt1308 right on link 2 */
+	{
+		.dlc = COMP_CODEC_CONF("sdw:2:25d:1308:0"),
+		.name_prefix = "rt1308-2",
+	},
+	{
+		.dlc = COMP_CODEC_CONF("sdw:3:25d:715:0"),
+		.name_prefix = "rt715",
+	},
+	{
+		.dlc = COMP_CODEC_CONF("sdw:0:25d:5682:0"),
+		.name_prefix = "rt5682",
+	},
+};
+
+static struct snd_soc_dai_link_component dmic_component[] = {
+	{
+		.name = "dmic-codec",
+		.dai_name = "dmic-hifi",
+	}
+};
+
+static struct snd_soc_dai_link_component platform_component[] = {
+	{
+		/* name might be overridden during probe */
+		.name = "0000:00:1f.3"
+	}
+};
+
+/* these wrappers are only needed to avoid typecast compilation errors */
+static int sdw_startup(struct snd_pcm_substream *substream)
+{
+	return sdw_startup_stream(substream);
+}
+
+static void sdw_shutdown(struct snd_pcm_substream *substream)
+{
+	sdw_shutdown_stream(substream);
+}
+
+static const struct snd_soc_ops sdw_ops = {
+	.startup = sdw_startup,
+	.shutdown = sdw_shutdown,
+};
+
+static struct sof_sdw_codec_info codec_info_list[] = {
+	{
+		.id = 0x700,
+		.direction = {true, true},
+		.dai_name = "rt700-aif1",
+		.init = sof_sdw_rt700_init,
+	},
+	{
+		.id = 0x711,
+		.direction = {true, true},
+		.dai_name = "rt711-aif1",
+		.init = sof_sdw_rt711_init,
+	},
+	{
+		.id = 0x1308,
+		.acpi_id = "10EC1308",
+		.direction = {true, false},
+		.dai_name = "rt1308-aif",
+		.ops = &sof_sdw_rt1308_i2s_ops,
+		.init = sof_sdw_rt1308_init,
+	},
+	{
+		.id = 0x715,
+		.direction = {false, true},
+		.dai_name = "rt715-aif2",
+		.init = sof_sdw_rt715_init,
+	},
+	{
+		.id = 0x5682,
+		.direction = {true, true},
+		.dai_name = "rt5682-sdw",
+		.init = sof_sdw_rt5682_init,
+	},
+};
+
+static inline int find_codec_info_part(unsigned int part_id)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(codec_info_list); i++)
+		if (part_id == codec_info_list[i].id)
+			break;
+
+	if (i == ARRAY_SIZE(codec_info_list))
+		return -EINVAL;
+
+	return i;
+}
+
+static inline int find_codec_info_acpi(const u8 *acpi_id)
+{
+	int i;
+
+	if (!acpi_id[0])
+		return -EINVAL;
+
+	for (i = 0; i < ARRAY_SIZE(codec_info_list); i++)
+		if (!memcmp(codec_info_list[i].acpi_id, acpi_id,
+			    ACPI_ID_LEN))
+			break;
+
+	if (i == ARRAY_SIZE(codec_info_list))
+		return -EINVAL;
+
+	return i;
+}
+
+/*
+ * get BE dailink number and CPU DAI number based on sdw link adr.
+ * Since some sdw slaves may be aggregated, the CPU DAI number
+ * may be larger than the number of BE dailinks.
+ */
+static int get_sdw_dailink_info(const struct snd_soc_acpi_link_adr *links,
+				int *sdw_be_num, int *sdw_cpu_dai_num)
+{
+	const struct snd_soc_acpi_link_adr *link;
+	bool group_visited[SDW_MAX_GROUPS];
+	bool no_aggregation;
+	int i;
+
+	no_aggregation = sof_sdw_quirk & SOF_SDW_NO_AGGREGATION;
+	*sdw_cpu_dai_num = 0;
+	*sdw_be_num  = 0;
+
+	if (!links)
+		return -EINVAL;
+
+	for (i = 0; i < SDW_MAX_GROUPS; i++)
+		group_visited[i] = false;
+
+	for (link = links; link->num_adr; link++) {
+		const struct snd_soc_acpi_endpoint *endpoint;
+		int part_id, codec_index;
+		int stream;
+		u64 adr;
+
+		adr = link->adr_d->adr;
+		part_id = SDW_PART_ID(adr);
+		codec_index = find_codec_info_part(part_id);
+		if (codec_index < 0)
+			return codec_index;
+
+		endpoint = link->adr_d->endpoints;
+
+		/* count DAI number for playback and capture */
+		for_each_pcm_streams(stream) {
+			if (!codec_info_list[codec_index].direction[stream])
+				continue;
+
+			(*sdw_cpu_dai_num)++;
+
+			/* count BE for each non-aggregated slave or group */
+			if (!endpoint->aggregated || no_aggregation ||
+			    !group_visited[endpoint->group_id])
+				(*sdw_be_num)++;
+		}
+
+		if (endpoint->aggregated)
+			group_visited[endpoint->group_id] = true;
+	}
+
+	return 0;
+}
+
+static void init_dai_link(struct snd_soc_dai_link *dai_links, int be_id,
+			  char *name, int playback, int capture,
+			  struct snd_soc_dai_link_component *cpus,
+			  int cpus_num,
+			  struct snd_soc_dai_link_component *codecs,
+			  int codecs_num,
+			  int (*init)(struct snd_soc_pcm_runtime *rtd),
+			  const struct snd_soc_ops *ops)
+{
+	dai_links->id = be_id;
+	dai_links->name = name;
+	dai_links->platforms = platform_component;
+	dai_links->num_platforms = ARRAY_SIZE(platform_component);
+	dai_links->nonatomic = true;
+	dai_links->no_pcm = 1;
+	dai_links->cpus = cpus;
+	dai_links->num_cpus = cpus_num;
+	dai_links->codecs = codecs;
+	dai_links->num_codecs = codecs_num;
+	dai_links->dpcm_playback = playback;
+	dai_links->dpcm_capture = capture;
+	dai_links->init = init;
+	dai_links->ops = ops;
+}
+
+static bool is_unique_device(const struct snd_soc_acpi_link_adr *link,
+			     unsigned int sdw_version,
+			     unsigned int mfg_id,
+			     unsigned int part_id,
+			     unsigned int class_id,
+			     int index_in_link
+			    )
+{
+	int i;
+
+	for (i = 0; i < link->num_adr; i++) {
+		unsigned int sdw1_version, mfg1_id, part1_id, class1_id;
+		u64 adr;
+
+		/* skip itself */
+		if (i == index_in_link)
+			continue;
+
+		adr = link->adr_d[i].adr;
+
+		sdw1_version = SDW_VERSION(adr);
+		mfg1_id = SDW_MFG_ID(adr);
+		part1_id = SDW_PART_ID(adr);
+		class1_id = SDW_CLASS_ID(adr);
+
+		if (sdw_version == sdw1_version &&
+		    mfg_id == mfg1_id &&
+		    part_id == part1_id &&
+		    class_id == class1_id)
+			return false;
+	}
+
+	return true;
+}
+
+static int create_codec_dai_name(struct device *dev,
+				 const struct snd_soc_acpi_link_adr *link,
+				 struct snd_soc_dai_link_component *codec,
+				 int offset)
+{
+	int i;
+
+	for (i = 0; i < link->num_adr; i++) {
+		unsigned int sdw_version, unique_id, mfg_id;
+		unsigned int link_id, part_id, class_id;
+		int codec_index, comp_index;
+		char *codec_str;
+		u64 adr;
+
+		adr = link->adr_d[i].adr;
+
+		sdw_version = SDW_VERSION(adr);
+		link_id = SDW_DISCO_LINK_ID(adr);
+		unique_id = SDW_UNIQUE_ID(adr);
+		mfg_id = SDW_MFG_ID(adr);
+		part_id = SDW_PART_ID(adr);
+		class_id = SDW_CLASS_ID(adr);
+
+		comp_index = i + offset;
+		if (is_unique_device(link, sdw_version, mfg_id, part_id,
+				     class_id, i)) {
+			codec_str = "sdw:%x:%x:%x:%x";
+			codec[comp_index].name =
+				devm_kasprintf(dev, GFP_KERNEL, codec_str,
+					       link_id, mfg_id, part_id,
+					       class_id);
+		} else {
+			codec_str = "sdw:%x:%x:%x:%x:%x";
+			codec[comp_index].name =
+				devm_kasprintf(dev, GFP_KERNEL, codec_str,
+					       link_id, mfg_id, part_id,
+					       class_id, unique_id);
+		}
+
+		if (!codec[comp_index].name)
+			return -ENOMEM;
+
+		codec_index = find_codec_info_part(part_id);
+		if (codec_index < 0)
+			return codec_index;
+
+		codec[comp_index].dai_name =
+			codec_info_list[codec_index].dai_name;
+	}
+
+	return 0;
+}
+
+static int set_codec_init_func(const struct snd_soc_acpi_link_adr *link,
+			       struct snd_soc_dai_link *dai_links,
+			       bool playback)
+{
+	int i;
+
+	for (i = 0; i < link->num_adr; i++) {
+		unsigned int part_id;
+		int codec_index;
+
+		part_id = SDW_PART_ID(link->adr_d[i].adr);
+		codec_index = find_codec_info_part(part_id);
+
+		if (codec_index < 0)
+			return codec_index;
+
+		if (codec_info_list[codec_index].init)
+			codec_info_list[codec_index].init(link, dai_links,
+						 &codec_info_list[codec_index],
+						 playback);
+	}
+
+	return 0;
+}
+
+/*
+ * check endpoint status in slaves and gather link ID for all slaves in
+ * the same group to generate different CPU DAI. Now only support
+ * one sdw link with all slaves set with only single group id.
+ *
+ * one slave on one sdw link with aggregated = 0
+ * one sdw BE DAI <---> one-cpu DAI <---> one-codec DAI
+ *
+ * two or more slaves on one sdw link with aggregated = 0
+ * one sdw BE DAI  <---> one-cpu DAI <---> multi-codec DAIs
+ *
+ * multiple links with multiple slaves with aggregated = 1
+ * one sdw BE DAI  <---> 1 .. N CPU DAIs <----> 1 .. N codec DAIs
+ */
+static int get_slave_info(const struct snd_soc_acpi_link_adr *adr_link,
+			  struct device *dev, int *cpu_dai_id, int *cpu_dai_num,
+			  int *codec_num, int *group_id,
+			  bool *group_generated)
+{
+	const struct snd_soc_acpi_adr_device *adr_d;
+	const struct snd_soc_acpi_link_adr *adr_next;
+	bool no_aggregation;
+	int index = 0;
+
+	no_aggregation = sof_sdw_quirk & SOF_SDW_NO_AGGREGATION;
+	*codec_num = adr_link->num_adr;
+	adr_d = adr_link->adr_d;
+
+	/* make sure the link mask has a single bit set */
+	if (!is_power_of_2(adr_link->mask))
+		return -EINVAL;
+
+	cpu_dai_id[index++] = ffs(adr_link->mask) - 1;
+	if (!adr_d->endpoints->aggregated || no_aggregation) {
+		*cpu_dai_num = 1;
+		*group_id = 0;
+		return 0;
+	}
+
+	*group_id = adr_d->endpoints->group_id;
+
+	/* gather other link ID of slaves in the same group */
+	for (adr_next = adr_link + 1; adr_next && adr_next->num_adr;
+		adr_next++) {
+		const struct snd_soc_acpi_endpoint *endpoint;
+
+		endpoint = adr_next->adr_d->endpoints;
+		if (!endpoint->aggregated ||
+		    endpoint->group_id != *group_id)
+			continue;
+
+		/* make sure the link mask has a single bit set */
+		if (!is_power_of_2(adr_next->mask))
+			return -EINVAL;
+
+		if (index >= SDW_MAX_CPU_DAIS) {
+			dev_err(dev, " cpu_dai_id array overflows");
+			return -EINVAL;
+		}
+
+		cpu_dai_id[index++] = ffs(adr_next->mask) - 1;
+		*codec_num += adr_next->num_adr;
+	}
+
+	/*
+	 * indicate CPU DAIs for this group have been generated
+	 * to avoid generating CPU DAIs for this group again.
+	 */
+	group_generated[*group_id] = true;
+	*cpu_dai_num = index;
+
+	return 0;
+}
+
+static int create_sdw_dailink(struct device *dev, int *be_index,
+			      struct snd_soc_dai_link *dai_links,
+			      int sdw_be_num, int sdw_cpu_dai_num,
+			      struct snd_soc_dai_link_component *cpus,
+			      const struct snd_soc_acpi_link_adr *link,
+			      int *cpu_id, bool *group_generated)
+{
+	const struct snd_soc_acpi_link_adr *link_next;
+	struct snd_soc_dai_link_component *codecs;
+	int cpu_dai_id[SDW_MAX_CPU_DAIS];
+	int cpu_dai_num, cpu_dai_index;
+	unsigned int part_id, group_id;
+	int codec_idx = 0;
+	int i = 0, j = 0;
+	int codec_index;
+	int codec_num;
+	int stream;
+	int ret;
+	int k;
+
+	ret = get_slave_info(link, dev, cpu_dai_id, &cpu_dai_num, &codec_num,
+			     &group_id, group_generated);
+	if (ret)
+		return ret;
+
+	codecs = devm_kcalloc(dev, codec_num, sizeof(*codecs), GFP_KERNEL);
+	if (!codecs)
+		return -ENOMEM;
+
+	/* generate codec name on different links in the same group */
+	for (link_next = link; link_next && link_next->num_adr &&
+	     i < cpu_dai_num; link_next++) {
+		const struct snd_soc_acpi_endpoint *endpoints;
+
+		endpoints = link_next->adr_d->endpoints;
+		if (group_id && (!endpoints->aggregated ||
+				 endpoints->group_id != group_id))
+			continue;
+
+		/* skip the link excluded by this processed group */
+		if (cpu_dai_id[i] != ffs(link_next->mask) - 1)
+			continue;
+
+		ret = create_codec_dai_name(dev, link_next, codecs, codec_idx);
+		if (ret < 0)
+			return ret;
+
+		/* check next link to create codec dai in the processed group */
+		i++;
+		codec_idx += link_next->num_adr;
+	}
+
+	/* find codec info to create BE DAI */
+	part_id = SDW_PART_ID(link->adr_d[0].adr);
+	codec_index = find_codec_info_part(part_id);
+	if (codec_index < 0)
+		return codec_index;
+
+	cpu_dai_index = *cpu_id;
+	for_each_pcm_streams(stream) {
+		char *name, *cpu_name;
+		int playback, capture;
+		static const char * const sdw_stream_name[] = {
+			"SDW%d-Playback",
+			"SDW%d-Capture",
+		};
+
+		if (!codec_info_list[codec_index].direction[stream])
+			continue;
+
+		/* create stream name according to first link id */
+		name = devm_kasprintf(dev, GFP_KERNEL,
+				      sdw_stream_name[stream], cpu_dai_id[0]);
+		if (!name)
+			return -ENOMEM;
+
+		/*
+		 * generate CPU DAI name base on the sdw link ID and
+		 * PIN ID with offset of 2 according to sdw dai driver.
+		 */
+		for (k = 0; k < cpu_dai_num; k++) {
+			cpu_name = devm_kasprintf(dev, GFP_KERNEL,
+						  "SDW%d Pin%d", cpu_dai_id[k],
+						  j + SDW_INTEL_BIDIR_PDI_BASE);
+			if (!cpu_name)
+				return -ENOMEM;
+
+			if (cpu_dai_index >= sdw_cpu_dai_num) {
+				dev_err(dev, "invalid cpu dai index %d",
+					cpu_dai_index);
+				return -EINVAL;
+			}
+
+			cpus[cpu_dai_index++].dai_name = cpu_name;
+		}
+
+		if (*be_index >= sdw_be_num) {
+			dev_err(dev, " invalid be dai index %d", *be_index);
+			return -EINVAL;
+		}
+
+		if (*cpu_id >= sdw_cpu_dai_num) {
+			dev_err(dev, " invalid cpu dai index %d", *cpu_id);
+			return -EINVAL;
+		}
+
+		playback = (stream == SNDRV_PCM_STREAM_PLAYBACK);
+		capture = (stream == SNDRV_PCM_STREAM_CAPTURE);
+		init_dai_link(dai_links + *be_index, *be_index, name,
+			      playback, capture,
+			      cpus + *cpu_id, cpu_dai_num,
+			      codecs, codec_num,
+			      NULL, &sdw_ops);
+
+		ret = set_codec_init_func(link, dai_links + (*be_index)++,
+					  playback);
+		if (ret < 0) {
+			dev_err(dev, "failed to init codec %d", codec_index);
+			return ret;
+		}
+
+		*cpu_id += cpu_dai_num;
+		j++;
+	}
+
+	return 0;
+}
+
+/*
+ * DAI link ID of SSP & DMIC & HDMI are based on last
+ * link ID used by sdw link. Since be_id may be changed
+ * in init func of sdw codec, it is not equal to be_id
+ */
+static inline int get_next_be_id(struct snd_soc_dai_link *links,
+				 int be_id)
+{
+	return links[be_id - 1].id + 1;
+}
+
+static int sof_card_dai_links_create(struct device *dev,
+				     struct snd_soc_acpi_mach *mach,
+				     struct snd_soc_card *card)
+{
+	int ssp_num, sdw_be_num = 0, hdmi_num = 0, dmic_num;
+#if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA_AUDIO_CODEC)
+	struct snd_soc_dai_link_component *idisp_components;
+#endif
+	struct snd_soc_dai_link_component *ssp_components;
+	struct snd_soc_acpi_mach_params *mach_params;
+	const struct snd_soc_acpi_link_adr *adr_link;
+	struct snd_soc_dai_link_component *cpus;
+	bool group_generated[SDW_MAX_GROUPS];
+	int ssp_codec_index, ssp_mask;
+	struct snd_soc_dai_link *links;
+	int num_links, link_id = 0;
+	char *name, *cpu_name;
+	int total_cpu_dai_num;
+	int sdw_cpu_dai_num;
+	int i, j, be_id = 0;
+	int cpu_id = 0;
+	int comp_num;
+	int ret;
+
+	/* reset amp_num to ensure amp_num++ starts from 0 in each probe */
+	for (i = 0; i < ARRAY_SIZE(codec_info_list); i++)
+		codec_info_list[i].amp_num = 0;
+
+#if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA_AUDIO_CODEC)
+	hdmi_num = sof_sdw_quirk & SOF_SDW_TGL_HDMI ?
+				SOF_TGL_HDMI_COUNT : SOF_PRE_TGL_HDMI_COUNT;
+#endif
+
+	ssp_mask = SOF_SSP_GET_PORT(sof_sdw_quirk);
+	/*
+	 * on generic tgl platform, I2S or sdw mode is supported
+	 * based on board rework. A ACPI device is registered in
+	 * system only when I2S mode is supported, not sdw mode.
+	 * Here check ACPI ID to confirm I2S is supported.
+	 */
+	ssp_codec_index = find_codec_info_acpi(mach->id);
+	ssp_num = ssp_codec_index >= 0 ? hweight_long(ssp_mask) : 0;
+	comp_num = hdmi_num + ssp_num;
+
+	mach_params = &mach->mach_params;
+	ret = get_sdw_dailink_info(mach_params->links,
+				   &sdw_be_num, &sdw_cpu_dai_num);
+	if (ret < 0) {
+		dev_err(dev, "failed to get sdw link info %d", ret);
+		return ret;
+	}
+
+	/* enable dmic01 & dmic16k */
+	dmic_num = (sof_sdw_quirk & SOF_SDW_PCH_DMIC) ? 2 : 0;
+	comp_num += dmic_num;
+
+	dev_dbg(dev, "sdw %d, ssp %d, dmic %d, hdmi %d", sdw_be_num, ssp_num,
+		dmic_num, hdmi_num);
+
+	/* allocate BE dailinks */
+	num_links = comp_num + sdw_be_num;
+	links = devm_kcalloc(dev, num_links, sizeof(*links), GFP_KERNEL);
+
+	/* allocated CPU DAIs */
+	total_cpu_dai_num = comp_num + sdw_cpu_dai_num;
+	cpus = devm_kcalloc(dev, total_cpu_dai_num, sizeof(*cpus),
+			    GFP_KERNEL);
+
+	if (!links || !cpus)
+		return -ENOMEM;
+
+	/* SDW */
+	if (!sdw_be_num)
+		goto SSP;
+
+	adr_link = mach_params->links;
+	if (!adr_link)
+		return -EINVAL;
+
+	/*
+	 * SoundWire Slaves aggregated in the same group may be
+	 * located on different hardware links. Clear array to indicate
+	 * CPU DAIs for this group have not been generated.
+	 */
+	for (i = 0; i < SDW_MAX_GROUPS; i++)
+		group_generated[i] = false;
+
+	/* generate DAI links by each sdw link */
+	for (; adr_link->num_adr; adr_link++) {
+		const struct snd_soc_acpi_endpoint *endpoint;
+
+		endpoint = adr_link->adr_d->endpoints;
+		if (endpoint->aggregated && !endpoint->group_id) {
+			dev_err(dev, "invalid group id on link %x",
+				adr_link->mask);
+			continue;
+		}
+
+		/* this group has been generated */
+		if (endpoint->aggregated &&
+		    group_generated[endpoint->group_id])
+			continue;
+
+		ret = create_sdw_dailink(dev, &be_id, links, sdw_be_num,
+					 sdw_cpu_dai_num, cpus, adr_link,
+					 &cpu_id, group_generated);
+		if (ret < 0) {
+			dev_err(dev, "failed to create dai link %d", be_id);
+			return -ENOMEM;
+		}
+	}
+
+	/* non-sdw DAI follows sdw DAI */
+	link_id = be_id;
+
+	/* get BE ID for non-sdw DAI */
+	be_id = get_next_be_id(links, be_id);
+
+SSP:
+	/* SSP */
+	if (!ssp_num)
+		goto DMIC;
+
+	for (i = 0, j = 0; ssp_mask; i++, ssp_mask >>= 1) {
+		struct sof_sdw_codec_info *info;
+		int playback, capture;
+		char *codec_name;
+
+		if (!(ssp_mask & 0x1))
+			continue;
+
+		name = devm_kasprintf(dev, GFP_KERNEL,
+				      "SSP%d-Codec", i);
+		if (!name)
+			return -ENOMEM;
+
+		cpu_name = devm_kasprintf(dev, GFP_KERNEL, "SSP%d Pin", i);
+		if (!cpu_name)
+			return -ENOMEM;
+
+		ssp_components = devm_kzalloc(dev, sizeof(*ssp_components),
+					      GFP_KERNEL);
+		if (!ssp_components)
+			return -ENOMEM;
+
+		info = &codec_info_list[ssp_codec_index];
+		codec_name = devm_kasprintf(dev, GFP_KERNEL, "i2c-%s:0%d",
+					    info->acpi_id, j++);
+		if (!codec_name)
+			return -ENOMEM;
+
+		ssp_components->name = codec_name;
+		ssp_components->dai_name = info->dai_name;
+		cpus[cpu_id].dai_name = cpu_name;
+
+		playback = info->direction[SNDRV_PCM_STREAM_PLAYBACK];
+		capture = info->direction[SNDRV_PCM_STREAM_CAPTURE];
+		init_dai_link(links + link_id, be_id, name,
+			      playback, capture,
+			      cpus + cpu_id, 1,
+			      ssp_components, 1,
+			      NULL, info->ops);
+
+		ret = info->init(NULL, links + link_id, info, 0);
+		if (ret < 0)
+			return ret;
+
+		INC_ID(be_id, cpu_id, link_id);
+	}
+
+DMIC:
+	/* dmic */
+	if (dmic_num > 0) {
+		cpus[cpu_id].dai_name = "DMIC01 Pin";
+		init_dai_link(links + link_id, be_id, "dmic01",
+			      0, 1, // DMIC only supports capture
+			      cpus + cpu_id, 1,
+			      dmic_component, 1,
+			      sof_sdw_dmic_init, NULL);
+		INC_ID(be_id, cpu_id, link_id);
+
+		cpus[cpu_id].dai_name = "DMIC16k Pin";
+		init_dai_link(links + link_id, be_id, "dmic16k",
+			      0, 1, // DMIC only supports capture
+			      cpus + cpu_id, 1,
+			      dmic_component, 1,
+			      /* don't call sof_sdw_dmic_init() twice */
+			      NULL, NULL);
+		INC_ID(be_id, cpu_id, link_id);
+	}
+
+#if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA_AUDIO_CODEC)
+	/* HDMI */
+	if (hdmi_num > 0) {
+		idisp_components = devm_kcalloc(dev, hdmi_num,
+						sizeof(*idisp_components),
+						GFP_KERNEL);
+		if (!idisp_components)
+			return -ENOMEM;
+	}
+
+	for (i = 0; i < hdmi_num; i++) {
+		name = devm_kasprintf(dev, GFP_KERNEL,
+				      "iDisp%d", i + 1);
+		if (!name)
+			return -ENOMEM;
+
+		idisp_components[i].name = "ehdaudio0D2";
+		idisp_components[i].dai_name = devm_kasprintf(dev,
+							      GFP_KERNEL,
+							      "intel-hdmi-hifi%d",
+							      i + 1);
+		if (!idisp_components[i].dai_name)
+			return -ENOMEM;
+
+		cpu_name = devm_kasprintf(dev, GFP_KERNEL,
+					  "iDisp%d Pin", i + 1);
+		if (!cpu_name)
+			return -ENOMEM;
+
+		cpus[cpu_id].dai_name = cpu_name;
+		init_dai_link(links + link_id, be_id, name,
+			      1, 0, // HDMI only supports playback
+			      cpus + cpu_id, 1,
+			      idisp_components + i, 1,
+			      sof_sdw_hdmi_init, NULL);
+		INC_ID(be_id, cpu_id, link_id);
+	}
+#endif
+
+	card->dai_link = links;
+	card->num_links = num_links;
+
+	return 0;
+}
+
+/* SoC card */
+static const char sdw_card_long_name[] = "Intel Soundwire SOF";
+
+static struct snd_soc_card card_sof_sdw = {
+	.name = "soundwire",
+	.late_probe = sof_sdw_hdmi_card_late_probe,
+	.codec_conf = codec_conf,
+	.num_configs = ARRAY_SIZE(codec_conf),
+};
+
+static int mc_probe(struct platform_device *pdev)
+{
+	struct snd_soc_card *card = &card_sof_sdw;
+	struct snd_soc_acpi_mach *mach;
+	struct mc_private *ctx;
+	int ret;
+
+	dev_dbg(&pdev->dev, "Entry %s\n", __func__);
+
+	ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	dmi_check_system(sof_sdw_quirk_table);
+
+#if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA_AUDIO_CODEC)
+	INIT_LIST_HEAD(&ctx->hdmi_pcm_list);
+#endif
+
+	card->dev = &pdev->dev;
+
+	mach = pdev->dev.platform_data;
+	ret = sof_card_dai_links_create(&pdev->dev, mach,
+					card);
+	if (ret < 0)
+		return ret;
+
+	ctx->common_hdmi_codec_drv = mach->mach_params.common_hdmi_codec_drv;
+
+	snd_soc_card_set_drvdata(card, ctx);
+
+	card->components = devm_kasprintf(card->dev, GFP_KERNEL,
+					  "cfg-spk:%d",
+					  (sof_sdw_quirk & SOF_SDW_FOUR_SPK) ? 4 : 2);
+	if (!card->components)
+		return -ENOMEM;
+
+	card->long_name = sdw_card_long_name;
+
+	/* Register the card */
+	ret = devm_snd_soc_register_card(&pdev->dev, card);
+	if (ret) {
+		dev_err(card->dev, "snd_soc_register_card failed %d\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, card);
+
+	return ret;
+}
+
+static struct platform_driver sof_sdw_driver = {
+	.driver = {
+		.name = "sof_sdw",
+		.pm = &snd_soc_pm_ops,
+	},
+	.probe = mc_probe,
+};
+
+module_platform_driver(sof_sdw_driver);
+
+MODULE_DESCRIPTION("ASoC SoundWire Generic Machine driver");
+MODULE_AUTHOR("Bard Liao <yung-chuan.liao@linux.intel.com>");
+MODULE_AUTHOR("Rander Wang <rander.wang@linux.intel.com>");
+MODULE_AUTHOR("Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:sof_sdw");
diff --git a/sound/soc/intel/boards/sof_sdw_common.h b/sound/soc/intel/boards/sof_sdw_common.h
new file mode 100644
index 0000000..dd593ff
--- /dev/null
+++ b/sound/soc/intel/boards/sof_sdw_common.h
@@ -0,0 +1,114 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *  Copyright (c) 2020 Intel Corporation
+ */
+
+/*
+ *  sof_sdw_common.h - prototypes for common helpers
+ */
+
+#ifndef SND_SOC_SOF_SDW_COMMON_H
+#define SND_SOC_SOF_SDW_COMMON_H
+
+#include <linux/bits.h>
+#include <linux/types.h>
+
+#define MAX_NO_PROPS 2
+#define MAX_HDMI_NUM 4
+#define SDW_DMIC_DAI_ID 4
+#define SDW_MAX_CPU_DAIS 16
+#define SDW_INTEL_BIDIR_PDI_BASE 2
+
+/* 8 combinations with 4 links + unused group 0 */
+#define SDW_MAX_GROUPS 9
+
+enum {
+	SOF_RT711_JD_SRC_JD1 = 1,
+	SOF_RT711_JD_SRC_JD2 = 2,
+};
+
+enum {
+	SOF_PRE_TGL_HDMI_COUNT = 3,
+	SOF_TGL_HDMI_COUNT = 4,
+};
+
+enum {
+	SOF_I2S_SSP0 = BIT(0),
+	SOF_I2S_SSP1 = BIT(1),
+	SOF_I2S_SSP2 = BIT(2),
+	SOF_I2S_SSP3 = BIT(3),
+	SOF_I2S_SSP4 = BIT(4),
+	SOF_I2S_SSP5 = BIT(5),
+};
+
+#define SOF_RT711_JDSRC(quirk)		((quirk) & GENMASK(1, 0))
+#define SOF_SDW_FOUR_SPK		BIT(2)
+#define SOF_SDW_TGL_HDMI		BIT(3)
+#define SOF_SDW_PCH_DMIC		BIT(4)
+#define SOF_SSP_PORT(x)		(((x) & GENMASK(5, 0)) << 5)
+#define SOF_SSP_GET_PORT(quirk)	(((quirk) >> 5) & GENMASK(5, 0))
+#define SOF_RT715_DAI_ID_FIX		BIT(11)
+#define SOF_SDW_NO_AGGREGATION		BIT(12)
+
+struct sof_sdw_codec_info {
+	const int id;
+	int amp_num;
+	const u8 acpi_id[ACPI_ID_LEN];
+	const bool direction[2]; // playback & capture support
+	const char *dai_name;
+	const struct snd_soc_ops *ops;
+
+	int  (*init)(const struct snd_soc_acpi_link_adr *link,
+		     struct snd_soc_dai_link *dai_links,
+		     struct sof_sdw_codec_info *info,
+		     bool playback);
+};
+
+struct mc_private {
+	struct list_head hdmi_pcm_list;
+	bool common_hdmi_codec_drv;
+	struct snd_soc_jack sdw_headset;
+};
+
+extern unsigned long sof_sdw_quirk;
+
+/* generic HDMI support */
+int sof_sdw_hdmi_init(struct snd_soc_pcm_runtime *rtd);
+
+int sof_sdw_hdmi_card_late_probe(struct snd_soc_card *card);
+
+/* DMIC support */
+int sof_sdw_dmic_init(struct snd_soc_pcm_runtime *rtd);
+
+/* RT711 support */
+int sof_sdw_rt711_init(const struct snd_soc_acpi_link_adr *link,
+		       struct snd_soc_dai_link *dai_links,
+		       struct sof_sdw_codec_info *info,
+		       bool playback);
+
+/* RT700 support */
+int sof_sdw_rt700_init(const struct snd_soc_acpi_link_adr *link,
+		       struct snd_soc_dai_link *dai_links,
+		       struct sof_sdw_codec_info *info,
+		       bool playback);
+
+/* RT1308 support */
+extern struct snd_soc_ops sof_sdw_rt1308_i2s_ops;
+
+int sof_sdw_rt1308_init(const struct snd_soc_acpi_link_adr *link,
+			struct snd_soc_dai_link *dai_links,
+			struct sof_sdw_codec_info *info,
+			bool playback);
+
+/* RT715 support */
+int sof_sdw_rt715_init(const struct snd_soc_acpi_link_adr *link,
+		       struct snd_soc_dai_link *dai_links,
+		       struct sof_sdw_codec_info *info,
+		       bool playback);
+
+/* RT5682 support */
+int sof_sdw_rt5682_init(const struct snd_soc_acpi_link_adr *link,
+			struct snd_soc_dai_link *dai_links,
+			struct sof_sdw_codec_info *info,
+			bool playback);
+
+#endif
diff --git a/sound/soc/intel/boards/sof_sdw_dmic.c b/sound/soc/intel/boards/sof_sdw_dmic.c
new file mode 100644
index 0000000..e92176b
--- /dev/null
+++ b/sound/soc/intel/boards/sof_sdw_dmic.c
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2020 Intel Corporation
+
+/*
+ *  sof_sdw_dmic - Helpers to handle dmic from generic machine driver
+ */
+
+#include <sound/soc.h>
+#include <sound/soc-acpi.h>
+#include "sof_sdw_common.h"
+
+static const struct snd_soc_dapm_widget dmic_widgets[] = {
+	SND_SOC_DAPM_MIC("SoC DMIC", NULL),
+};
+
+static const struct snd_soc_dapm_route dmic_map[] = {
+	/* digital mics */
+	{"DMic", NULL, "SoC DMIC"},
+};
+
+int sof_sdw_dmic_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_card *card = rtd->card;
+	int ret;
+
+	ret = snd_soc_dapm_new_controls(&card->dapm, dmic_widgets,
+					ARRAY_SIZE(dmic_widgets));
+	if (ret) {
+		dev_err(card->dev, "DMic widget addition failed: %d\n", ret);
+		/* Don't need to add routes if widget addition failed */
+		return ret;
+	}
+
+	ret = snd_soc_dapm_add_routes(&card->dapm, dmic_map,
+				      ARRAY_SIZE(dmic_map));
+
+	if (ret)
+		dev_err(card->dev, "DMic map addition failed: %d\n", ret);
+
+	return ret;
+}
+
diff --git a/sound/soc/intel/boards/sof_sdw_hdmi.c b/sound/soc/intel/boards/sof_sdw_hdmi.c
new file mode 100644
index 0000000..c7b5612
--- /dev/null
+++ b/sound/soc/intel/boards/sof_sdw_hdmi.c
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2020 Intel Corporation
+
+/*
+ *  sof_sdw_hdmi - Helpers to handle HDMI from generic machine driver
+ */
+
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <sound/soc.h>
+#include <sound/soc-acpi.h>
+#include <sound/jack.h>
+#include "sof_sdw_common.h"
+#include "../../codecs/hdac_hdmi.h"
+#include "hda_dsp_common.h"
+
+#if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA_AUDIO_CODEC)
+static struct snd_soc_jack hdmi[MAX_HDMI_NUM];
+
+struct hdmi_pcm {
+	struct list_head head;
+	struct snd_soc_dai *codec_dai;
+	int device;
+};
+
+int sof_sdw_hdmi_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct mc_private *ctx = snd_soc_card_get_drvdata(rtd->card);
+	struct snd_soc_dai *dai = rtd->codec_dai;
+	struct hdmi_pcm *pcm;
+
+	pcm = devm_kzalloc(rtd->card->dev, sizeof(*pcm), GFP_KERNEL);
+	if (!pcm)
+		return -ENOMEM;
+
+	/* dai_link id is 1:1 mapped to the PCM device */
+	pcm->device = rtd->dai_link->id;
+	pcm->codec_dai = dai;
+
+	list_add_tail(&pcm->head, &ctx->hdmi_pcm_list);
+
+	return 0;
+}
+
+#define NAME_SIZE	32
+int sof_sdw_hdmi_card_late_probe(struct snd_soc_card *card)
+{
+	struct mc_private *ctx = snd_soc_card_get_drvdata(card);
+	struct hdmi_pcm *pcm;
+	struct snd_soc_component *component = NULL;
+	int err, i = 0;
+	char jack_name[NAME_SIZE];
+
+	pcm = list_first_entry(&ctx->hdmi_pcm_list, struct hdmi_pcm,
+			       head);
+	component = pcm->codec_dai->component;
+
+	if (ctx->common_hdmi_codec_drv)
+		return hda_dsp_hdmi_build_controls(card, component);
+
+	list_for_each_entry(pcm, &ctx->hdmi_pcm_list, head) {
+		component = pcm->codec_dai->component;
+		snprintf(jack_name, sizeof(jack_name),
+			 "HDMI/DP, pcm=%d Jack", pcm->device);
+		err = snd_soc_card_jack_new(card, jack_name,
+					    SND_JACK_AVOUT, &hdmi[i],
+					    NULL, 0);
+
+		if (err)
+			return err;
+
+		err = snd_jack_add_new_kctl(hdmi[i].jack,
+					    jack_name, SND_JACK_AVOUT);
+		if (err)
+			dev_warn(component->dev, "failed creating Jack kctl\n");
+
+		err = hdac_hdmi_jack_init(pcm->codec_dai, pcm->device,
+					  &hdmi[i]);
+		if (err < 0)
+			return err;
+
+		i++;
+	}
+
+	if (!component)
+		return -EINVAL;
+
+	return hdac_hdmi_jack_port_init(component, &card->dapm);
+}
+#else
+int hdmi_card_late_probe(struct snd_soc_card *card)
+{
+	return 0;
+}
+#endif
diff --git a/sound/soc/intel/boards/sof_sdw_rt1308.c b/sound/soc/intel/boards/sof_sdw_rt1308.c
new file mode 100644
index 0000000..321768e
--- /dev/null
+++ b/sound/soc/intel/boards/sof_sdw_rt1308.c
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2020 Intel Corporation
+
+/*
+ *  sof_sdw_rt1308 - Helpers to handle RT1308 from generic machine driver
+ */
+
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <sound/soc.h>
+#include <sound/soc-acpi.h>
+#include "sof_sdw_common.h"
+#include "../../codecs/rt1308.h"
+
+static const struct snd_soc_dapm_widget rt1308_widgets[] = {
+	SND_SOC_DAPM_SPK("Speaker", NULL),
+};
+
+/*
+ * dapm routes for rt1308 will be registered dynamically according
+ * to the number of rt1308 used. The first two entries will be registered
+ * for one codec case, and the last two entries are also registered
+ * if two 1308s are used.
+ */
+static const struct snd_soc_dapm_route rt1308_map[] = {
+	{ "Speaker", NULL, "rt1308-1 SPOL" },
+	{ "Speaker", NULL, "rt1308-1 SPOR" },
+	{ "Speaker", NULL, "rt1308-2 SPOL" },
+	{ "Speaker", NULL, "rt1308-2 SPOR" },
+};
+
+static const struct snd_kcontrol_new rt1308_controls[] = {
+	SOC_DAPM_PIN_SWITCH("Speaker"),
+};
+
+static int first_spk_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_card *card = rtd->card;
+	int ret;
+
+	card->components = devm_kasprintf(card->dev, GFP_KERNEL,
+					  "%s spk:rt1308",
+					  card->components);
+	if (!card->components)
+		return -ENOMEM;
+
+	ret = snd_soc_add_card_controls(card, rt1308_controls,
+					ARRAY_SIZE(rt1308_controls));
+	if (ret) {
+		dev_err(card->dev, "rt1308 controls addition failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_dapm_new_controls(&card->dapm, rt1308_widgets,
+					ARRAY_SIZE(rt1308_widgets));
+	if (ret) {
+		dev_err(card->dev, "rt1308 widgets addition failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_dapm_add_routes(&card->dapm, rt1308_map, 2);
+	if (ret)
+		dev_err(rtd->dev, "failed to add first SPK map: %d\n", ret);
+
+	return ret;
+}
+
+static int second_spk_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_card *card = rtd->card;
+	int ret;
+
+	ret = snd_soc_dapm_add_routes(&card->dapm, rt1308_map + 2, 2);
+	if (ret)
+		dev_err(rtd->dev, "failed to add second SPK map: %d\n", ret);
+
+	return ret;
+}
+
+static int all_spk_init(struct snd_soc_pcm_runtime *rtd)
+{
+	int ret;
+
+	ret = first_spk_init(rtd);
+	if (ret)
+		return ret;
+
+	return second_spk_init(rtd);
+}
+
+static int rt1308_i2s_hw_params(struct snd_pcm_substream *substream,
+				struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_card *card = rtd->card;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	int clk_id, clk_freq, pll_out;
+	int err;
+
+	clk_id = RT1308_PLL_S_MCLK;
+	clk_freq = 38400000;
+
+	pll_out = params_rate(params) * 512;
+
+	/* Set rt1308 pll */
+	err = snd_soc_dai_set_pll(codec_dai, 0, clk_id, clk_freq, pll_out);
+	if (err < 0) {
+		dev_err(card->dev, "Failed to set RT1308 PLL: %d\n", err);
+		return err;
+	}
+
+	/* Set rt1308 sysclk */
+	err = snd_soc_dai_set_sysclk(codec_dai, RT1308_FS_SYS_S_PLL, pll_out,
+				     SND_SOC_CLOCK_IN);
+	if (err < 0) {
+		dev_err(card->dev, "Failed to set RT1308 SYSCLK: %d\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+/* machine stream operations */
+struct snd_soc_ops sof_sdw_rt1308_i2s_ops = {
+	.hw_params = rt1308_i2s_hw_params,
+};
+
+int sof_sdw_rt1308_init(const struct snd_soc_acpi_link_adr *link,
+			struct snd_soc_dai_link *dai_links,
+			struct sof_sdw_codec_info *info,
+			bool playback)
+{
+	info->amp_num++;
+	if (info->amp_num == 1)
+		dai_links->init = first_spk_init;
+
+	if (info->amp_num == 2) {
+		/*
+		 * if two 1308s are in one dai link, the init function
+		 * in this dai link will be first set for the first speaker,
+		 * and it should be reset to initialize all speakers when
+		 * the second speaker is found.
+		 */
+		if (dai_links->init)
+			dai_links->init = all_spk_init;
+		else
+			dai_links->init = second_spk_init;
+	}
+
+	return 0;
+}
diff --git a/sound/soc/intel/boards/sof_sdw_rt5682.c b/sound/soc/intel/boards/sof_sdw_rt5682.c
new file mode 100644
index 0000000..5aa6211
--- /dev/null
+++ b/sound/soc/intel/boards/sof_sdw_rt5682.c
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2020 Intel Corporation
+
+/*
+ *  sof_sdw_rt5682 - Helpers to handle RT5682 from generic machine driver
+ */
+
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/input.h>
+#include <linux/soundwire/sdw.h>
+#include <linux/soundwire/sdw_type.h>
+#include <sound/soc.h>
+#include <sound/soc-acpi.h>
+#include <sound/jack.h>
+#include "sof_sdw_common.h"
+
+static const struct snd_soc_dapm_widget rt5682_widgets[] = {
+	SND_SOC_DAPM_HP("Headphone", NULL),
+	SND_SOC_DAPM_MIC("Headset Mic", NULL),
+};
+
+static const struct snd_soc_dapm_route rt5682_map[] = {
+	/*Headphones*/
+	{ "Headphone", NULL, "rt5682 HPOL" },
+	{ "Headphone", NULL, "rt5682 HPOR" },
+	{ "rt5682 IN1P", NULL, "Headset Mic" },
+};
+
+static const struct snd_kcontrol_new rt5682_controls[] = {
+	SOC_DAPM_PIN_SWITCH("Headphone"),
+	SOC_DAPM_PIN_SWITCH("Headset Mic"),
+};
+
+static struct snd_soc_jack_pin rt5682_jack_pins[] = {
+	{
+		.pin    = "Headphone",
+		.mask   = SND_JACK_HEADPHONE,
+	},
+	{
+		.pin    = "Headset Mic",
+		.mask   = SND_JACK_MICROPHONE,
+	},
+};
+
+static int rt5682_rtd_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_card *card = rtd->card;
+	struct mc_private *ctx = snd_soc_card_get_drvdata(card);
+	struct snd_soc_component *component = rtd->codec_dai->component;
+	struct snd_soc_jack *jack;
+	int ret;
+
+	card->components = devm_kasprintf(card->dev, GFP_KERNEL,
+					  "%s hs:rt5682",
+					  card->components);
+	if (!card->components)
+		return -ENOMEM;
+
+	ret = snd_soc_add_card_controls(card, rt5682_controls,
+					ARRAY_SIZE(rt5682_controls));
+	if (ret) {
+		dev_err(card->dev, "rt5682 control addition failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_dapm_new_controls(&card->dapm, rt5682_widgets,
+					ARRAY_SIZE(rt5682_widgets));
+	if (ret) {
+		dev_err(card->dev, "rt5682 widgets addition failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_dapm_add_routes(&card->dapm, rt5682_map,
+				      ARRAY_SIZE(rt5682_map));
+
+	if (ret) {
+		dev_err(card->dev, "rt5682 map addition failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_card_jack_new(rtd->card, "Headset Jack",
+				    SND_JACK_HEADSET | SND_JACK_BTN_0 |
+				    SND_JACK_BTN_1 | SND_JACK_BTN_2 |
+				    SND_JACK_BTN_3,
+				    &ctx->sdw_headset,
+				    rt5682_jack_pins,
+				    ARRAY_SIZE(rt5682_jack_pins));
+	if (ret) {
+		dev_err(rtd->card->dev, "Headset Jack creation failed: %d\n",
+			ret);
+		return ret;
+	}
+
+	jack = &ctx->sdw_headset;
+
+	snd_jack_set_key(jack->jack, SND_JACK_BTN_0, KEY_PLAYPAUSE);
+	snd_jack_set_key(jack->jack, SND_JACK_BTN_1, KEY_VOICECOMMAND);
+	snd_jack_set_key(jack->jack, SND_JACK_BTN_2, KEY_VOLUMEUP);
+	snd_jack_set_key(jack->jack, SND_JACK_BTN_3, KEY_VOLUMEDOWN);
+
+	ret = snd_soc_component_set_jack(component, jack, NULL);
+
+	if (ret)
+		dev_err(rtd->card->dev, "Headset Jack call-back failed: %d\n",
+			ret);
+
+	return ret;
+}
+
+int sof_sdw_rt5682_init(const struct snd_soc_acpi_link_adr *link,
+			struct snd_soc_dai_link *dai_links,
+			struct sof_sdw_codec_info *info,
+			bool playback)
+{
+	/*
+	 * headset should be initialized once.
+	 * Do it with dai link for playback.
+	 */
+	if (!playback)
+		return 0;
+
+	dai_links->init = rt5682_rtd_init;
+
+	return 0;
+}
diff --git a/sound/soc/intel/boards/sof_sdw_rt700.c b/sound/soc/intel/boards/sof_sdw_rt700.c
new file mode 100644
index 0000000..2ee4e69
--- /dev/null
+++ b/sound/soc/intel/boards/sof_sdw_rt700.c
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2020 Intel Corporation
+
+/*
+ *  sof_sdw_rt700 - Helpers to handle RT700 from generic machine driver
+ */
+
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/input.h>
+#include <sound/soc.h>
+#include <sound/soc-acpi.h>
+#include <sound/jack.h>
+#include "sof_sdw_common.h"
+
+static const struct snd_soc_dapm_widget rt700_widgets[] = {
+	SND_SOC_DAPM_HP("Headphones", NULL),
+	SND_SOC_DAPM_MIC("AMIC", NULL),
+	SND_SOC_DAPM_SPK("Speaker", NULL),
+};
+
+static const struct snd_soc_dapm_route rt700_map[] = {
+	/* Headphones */
+	{ "Headphones", NULL, "HP" },
+	{ "Speaker", NULL, "SPK" },
+	{ "MIC2", NULL, "AMIC" },
+};
+
+static const struct snd_kcontrol_new rt700_controls[] = {
+	SOC_DAPM_PIN_SWITCH("Headphones"),
+	SOC_DAPM_PIN_SWITCH("AMIC"),
+	SOC_DAPM_PIN_SWITCH("Speaker"),
+};
+
+static struct snd_soc_jack_pin rt700_jack_pins[] = {
+	{
+		.pin    = "Headphones",
+		.mask   = SND_JACK_HEADPHONE,
+	},
+	{
+		.pin    = "AMIC",
+		.mask   = SND_JACK_MICROPHONE,
+	},
+};
+
+static int rt700_rtd_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_card *card = rtd->card;
+	struct mc_private *ctx = snd_soc_card_get_drvdata(card);
+	struct snd_soc_component *component = rtd->codec_dai->component;
+	struct snd_soc_jack *jack;
+	int ret;
+
+	card->components = devm_kasprintf(card->dev, GFP_KERNEL,
+					  "%s hs:rt700",
+					  card->components);
+	if (!card->components)
+		return -ENOMEM;
+
+	ret = snd_soc_add_card_controls(card, rt700_controls,
+					ARRAY_SIZE(rt700_controls));
+	if (ret) {
+		dev_err(card->dev, "rt700 controls addition failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_dapm_new_controls(&card->dapm, rt700_widgets,
+					ARRAY_SIZE(rt700_widgets));
+	if (ret) {
+		dev_err(card->dev, "rt700 widgets addition failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_dapm_add_routes(&card->dapm, rt700_map,
+				      ARRAY_SIZE(rt700_map));
+
+	if (ret) {
+		dev_err(card->dev, "rt700 map addition failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_card_jack_new(rtd->card, "Headset Jack",
+				    SND_JACK_HEADSET | SND_JACK_BTN_0 |
+				    SND_JACK_BTN_1 | SND_JACK_BTN_2 |
+				    SND_JACK_BTN_3,
+				    &ctx->sdw_headset,
+				    rt700_jack_pins,
+				    ARRAY_SIZE(rt700_jack_pins));
+	if (ret) {
+		dev_err(rtd->card->dev, "Headset Jack creation failed: %d\n",
+			ret);
+		return ret;
+	}
+
+	jack = &ctx->sdw_headset;
+
+	snd_jack_set_key(jack->jack, SND_JACK_BTN_0, KEY_VOLUMEUP);
+	snd_jack_set_key(jack->jack, SND_JACK_BTN_1, KEY_PLAYPAUSE);
+	snd_jack_set_key(jack->jack, SND_JACK_BTN_2, KEY_VOLUMEDOWN);
+	snd_jack_set_key(jack->jack, SND_JACK_BTN_3, KEY_VOICECOMMAND);
+
+	ret = snd_soc_component_set_jack(component, jack, NULL);
+	if (ret)
+		dev_err(rtd->card->dev, "Headset Jack call-back failed: %d\n",
+			ret);
+
+	return ret;
+}
+
+int sof_sdw_rt700_init(const struct snd_soc_acpi_link_adr *link,
+		       struct snd_soc_dai_link *dai_links,
+		       struct sof_sdw_codec_info *info,
+		       bool playback)
+{
+	/*
+	 * headset should be initialized once.
+	 * Do it with dai link for playback.
+	 */
+	if (!playback)
+		return 0;
+
+	dai_links->init = rt700_rtd_init;
+
+	return 0;
+}
diff --git a/sound/soc/intel/boards/sof_sdw_rt711.c b/sound/soc/intel/boards/sof_sdw_rt711.c
new file mode 100644
index 0000000..2a4917e
--- /dev/null
+++ b/sound/soc/intel/boards/sof_sdw_rt711.c
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2020 Intel Corporation
+
+/*
+ *  sof_sdw_rt711 - Helpers to handle RT711 from generic machine driver
+ */
+
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/input.h>
+#include <linux/soundwire/sdw.h>
+#include <linux/soundwire/sdw_type.h>
+#include <sound/soc.h>
+#include <sound/soc-acpi.h>
+#include <sound/jack.h>
+#include "sof_sdw_common.h"
+
+/*
+ * Note this MUST be called before snd_soc_register_card(), so that the props
+ * are in place before the codec component driver's probe function parses them.
+ */
+static int rt711_add_codec_device_props(const char *sdw_dev_name)
+{
+	struct property_entry props[MAX_NO_PROPS] = {};
+	struct device *sdw_dev;
+	int ret;
+
+	sdw_dev = bus_find_device_by_name(&sdw_bus_type, NULL, sdw_dev_name);
+	if (!sdw_dev)
+		return -EPROBE_DEFER;
+
+	if (SOF_RT711_JDSRC(sof_sdw_quirk)) {
+		props[0] = PROPERTY_ENTRY_U32("realtek,jd-src",
+					      SOF_RT711_JDSRC(sof_sdw_quirk));
+	}
+
+	ret = device_add_properties(sdw_dev, props);
+	put_device(sdw_dev);
+
+	return ret;
+}
+
+static const struct snd_soc_dapm_widget rt711_widgets[] = {
+	SND_SOC_DAPM_HP("Headphone", NULL),
+	SND_SOC_DAPM_MIC("Headset Mic", NULL),
+};
+
+static const struct snd_soc_dapm_route rt711_map[] = {
+	/* Headphones */
+	{ "Headphone", NULL, "rt711 HP" },
+	{ "rt711 MIC2", NULL, "Headset Mic" },
+};
+
+static const struct snd_kcontrol_new rt711_controls[] = {
+	SOC_DAPM_PIN_SWITCH("Headphone"),
+	SOC_DAPM_PIN_SWITCH("Headset Mic"),
+};
+
+static struct snd_soc_jack_pin rt711_jack_pins[] = {
+	{
+		.pin    = "Headphone",
+		.mask   = SND_JACK_HEADPHONE,
+	},
+	{
+		.pin    = "Headset Mic",
+		.mask   = SND_JACK_MICROPHONE,
+	},
+};
+
+static int rt711_rtd_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_card *card = rtd->card;
+	struct mc_private *ctx = snd_soc_card_get_drvdata(card);
+	struct snd_soc_component *component = rtd->codec_dai->component;
+	struct snd_soc_jack *jack;
+	int ret;
+
+	card->components = devm_kasprintf(card->dev, GFP_KERNEL,
+					  "%s hs:rt711",
+					  card->components);
+	if (!card->components)
+		return -ENOMEM;
+
+	ret = snd_soc_add_card_controls(card, rt711_controls,
+					ARRAY_SIZE(rt711_controls));
+	if (ret) {
+		dev_err(card->dev, "rt711 controls addition failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_dapm_new_controls(&card->dapm, rt711_widgets,
+					ARRAY_SIZE(rt711_widgets));
+	if (ret) {
+		dev_err(card->dev, "rt711 widgets addition failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_dapm_add_routes(&card->dapm, rt711_map,
+				      ARRAY_SIZE(rt711_map));
+
+	if (ret) {
+		dev_err(card->dev, "rt711 map addition failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_card_jack_new(rtd->card, "Headset Jack",
+				    SND_JACK_HEADSET | SND_JACK_BTN_0 |
+				    SND_JACK_BTN_1 | SND_JACK_BTN_2 |
+				    SND_JACK_BTN_3,
+				    &ctx->sdw_headset,
+				    rt711_jack_pins,
+				    ARRAY_SIZE(rt711_jack_pins));
+	if (ret) {
+		dev_err(rtd->card->dev, "Headset Jack creation failed: %d\n",
+			ret);
+		return ret;
+	}
+
+	jack = &ctx->sdw_headset;
+
+	snd_jack_set_key(jack->jack, SND_JACK_BTN_0, KEY_VOLUMEUP);
+	snd_jack_set_key(jack->jack, SND_JACK_BTN_1, KEY_PLAYPAUSE);
+	snd_jack_set_key(jack->jack, SND_JACK_BTN_2, KEY_VOLUMEDOWN);
+	snd_jack_set_key(jack->jack, SND_JACK_BTN_3, KEY_VOICECOMMAND);
+
+	ret = snd_soc_component_set_jack(component, jack, NULL);
+
+	if (ret)
+		dev_err(rtd->card->dev, "Headset Jack call-back failed: %d\n",
+			ret);
+
+	return ret;
+}
+
+int sof_sdw_rt711_init(const struct snd_soc_acpi_link_adr *link,
+		       struct snd_soc_dai_link *dai_links,
+		       struct sof_sdw_codec_info *info,
+		       bool playback)
+{
+	int ret;
+
+	/*
+	 * headset should be initialized once.
+	 * Do it with dai link for playback.
+	 */
+	if (!playback)
+		return 0;
+
+	ret = rt711_add_codec_device_props("sdw:0:25d:711:0");
+	if (ret < 0)
+		return ret;
+
+	dai_links->init = rt711_rtd_init;
+
+	return 0;
+}
diff --git a/sound/soc/intel/boards/sof_sdw_rt715.c b/sound/soc/intel/boards/sof_sdw_rt715.c
new file mode 100644
index 0000000..321e1cb
--- /dev/null
+++ b/sound/soc/intel/boards/sof_sdw_rt715.c
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2020 Intel Corporation
+
+/*
+ *  sof_sdw_rt715 - Helpers to handle RT715 from generic machine driver
+ */
+
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <sound/soc.h>
+#include <sound/soc-acpi.h>
+#include "sof_sdw_common.h"
+
+static int rt715_rtd_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_card *card = rtd->card;
+
+	card->components = devm_kasprintf(card->dev, GFP_KERNEL,
+					  "%s mic:rt715",
+					  card->components);
+	if (!card->components)
+		return -ENOMEM;
+
+	return 0;
+}
+
+int sof_sdw_rt715_init(const struct snd_soc_acpi_link_adr *link,
+		       struct snd_soc_dai_link *dai_links,
+		       struct sof_sdw_codec_info *info,
+		       bool playback)
+{
+	/*
+	 * DAI ID is fixed at SDW_DMIC_DAI_ID for 715 to
+	 * keep sdw DMIC and HDMI setting static in UCM
+	 */
+	if (sof_sdw_quirk & SOF_RT715_DAI_ID_FIX)
+		dai_links->id = SDW_DMIC_DAI_ID;
+
+	dai_links->init = rt715_rtd_init;
+
+	return 0;
+}
diff --git a/sound/soc/intel/common/soc-acpi-intel-bxt-match.c b/sound/soc/intel/common/soc-acpi-intel-bxt-match.c
index 4a5adae..f5092bc 100644
--- a/sound/soc/intel/common/soc-acpi-intel-bxt-match.c
+++ b/sound/soc/intel/common/soc-acpi-intel-bxt-match.c
@@ -65,7 +65,7 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_bxt_machines[] = {
 	},
 	{
 		.id = "104C5122",
-		.drv_name = "bxt-pcm512x",
+		.drv_name = "sof_pcm512x",
 		.sof_fw_filename = "sof-apl.ri",
 		.sof_tplg_filename = "sof-apl-pcm512x.tplg",
 	},
diff --git a/sound/soc/intel/common/soc-acpi-intel-cht-match.c b/sound/soc/intel/common/soc-acpi-intel-cht-match.c
index d0fb43c..2752dc9 100644
--- a/sound/soc/intel/common/soc-acpi-intel-cht-match.c
+++ b/sound/soc/intel/common/soc-acpi-intel-cht-match.c
@@ -174,6 +174,13 @@ struct snd_soc_acpi_mach  snd_soc_acpi_intel_cherrytrail_machines[] = {
 		.sof_fw_filename = "sof-cht.ri",
 		.sof_tplg_filename = "sof-cht-cx2072x.tplg",
 	},
+	{
+		.id = "104C5122",
+		.drv_name = "sof_pcm512x",
+		.sof_fw_filename = "sof-cht.ri",
+		.sof_tplg_filename = "sof-cht-src-50khz-pcm512x.tplg",
+	},
+
 #if IS_ENABLED(CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH)
 	/*
 	 * This is always last in the table so that it is selected only when
diff --git a/sound/soc/intel/common/soc-acpi-intel-cml-match.c b/sound/soc/intel/common/soc-acpi-intel-cml-match.c
index f55634c..bcedec6 100644
--- a/sound/soc/intel/common/soc-acpi-intel-cml-match.c
+++ b/sound/soc/intel/common/soc-acpi-intel-cml-match.c
@@ -59,42 +59,112 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_cml_machines[] = {
 };
 EXPORT_SYMBOL_GPL(snd_soc_acpi_intel_cml_machines);
 
-static const u64 rt711_0_adr[] = {
-	0x000010025D071100
+static const struct snd_soc_acpi_endpoint single_endpoint = {
+	.num = 0,
+	.aggregated = 0,
+	.group_position = 0,
+	.group_id = 0,
 };
 
-static const u64 rt1308_1_adr[] = {
-	0x000110025D130800
+static const struct snd_soc_acpi_endpoint spk_l_endpoint = {
+	.num = 0,
+	.aggregated = 1,
+	.group_position = 0,
+	.group_id = 1,
 };
 
-static const u64 rt1308_2_adr[] = {
-	0x000210025D130800
+static const struct snd_soc_acpi_endpoint spk_r_endpoint = {
+	.num = 0,
+	.aggregated = 1,
+	.group_position = 1,
+	.group_id = 1,
 };
 
-static const u64 rt715_3_adr[] = {
-	0x000310025D071500
+static const struct snd_soc_acpi_adr_device rt700_1_adr[] = {
+	{
+		.adr = 0x000110025D070000,
+		.num_endpoints = 1,
+		.endpoints = &single_endpoint,
+	}
+};
+
+static const struct snd_soc_acpi_link_adr cml_rvp[] = {
+	{
+		.mask = BIT(1),
+		.num_adr = ARRAY_SIZE(rt700_1_adr),
+		.adr_d = rt700_1_adr,
+	},
+	{}
+};
+
+static const struct snd_soc_acpi_adr_device rt711_0_adr[] = {
+	{
+		.adr = 0x000010025D071100,
+		.num_endpoints = 1,
+		.endpoints = &single_endpoint,
+	}
+};
+
+static const struct snd_soc_acpi_adr_device rt1308_1_adr[] = {
+	{
+		.adr = 0x000110025D130800,
+		.num_endpoints = 1,
+		.endpoints = &single_endpoint,
+	}
+};
+
+static const struct snd_soc_acpi_adr_device rt1308_2_adr[] = {
+	{
+		.adr = 0x000210025D130800,
+		.num_endpoints = 1,
+		.endpoints = &single_endpoint,
+	}
+};
+
+static const struct snd_soc_acpi_adr_device rt1308_1_group1_adr[] = {
+	{
+		.adr = 0x000110025D130800,
+		.num_endpoints = 1,
+		.endpoints = &spk_l_endpoint,
+	}
+};
+
+static const struct snd_soc_acpi_adr_device rt1308_2_group1_adr[] = {
+	{
+		.adr = 0x000210025D130800,
+		.num_endpoints = 1,
+		.endpoints = &spk_r_endpoint,
+	}
+};
+
+static const struct snd_soc_acpi_adr_device rt715_3_adr[] = {
+	{
+		.adr = 0x000310025D071500,
+		.num_endpoints = 1,
+		.endpoints = &single_endpoint,
+	}
 };
 
 static const struct snd_soc_acpi_link_adr cml_3_in_1_default[] = {
 	{
 		.mask = BIT(0),
 		.num_adr = ARRAY_SIZE(rt711_0_adr),
-		.adr = rt711_0_adr,
+		.adr_d = rt711_0_adr,
 	},
 	{
 		.mask = BIT(1),
-		.num_adr = ARRAY_SIZE(rt1308_1_adr),
-		.adr = rt1308_1_adr,
+		.num_adr = ARRAY_SIZE(rt1308_1_group1_adr),
+		.adr_d = rt1308_1_group1_adr,
 	},
 	{
 		.mask = BIT(2),
-		.num_adr = ARRAY_SIZE(rt1308_2_adr),
-		.adr = rt1308_2_adr,
+		.num_adr = ARRAY_SIZE(rt1308_2_group1_adr),
+		.adr_d = rt1308_2_group1_adr,
 	},
 	{
 		.mask = BIT(3),
 		.num_adr = ARRAY_SIZE(rt715_3_adr),
-		.adr = rt715_3_adr,
+		.adr_d = rt715_3_adr,
 	},
 	{}
 };
@@ -103,17 +173,17 @@ static const struct snd_soc_acpi_link_adr cml_3_in_1_mono_amp[] = {
 	{
 		.mask = BIT(0),
 		.num_adr = ARRAY_SIZE(rt711_0_adr),
-		.adr = rt711_0_adr,
+		.adr_d = rt711_0_adr,
 	},
 	{
 		.mask = BIT(1),
 		.num_adr = ARRAY_SIZE(rt1308_1_adr),
-		.adr = rt1308_1_adr,
+		.adr_d = rt1308_1_adr,
 	},
 	{
 		.mask = BIT(3),
 		.num_adr = ARRAY_SIZE(rt715_3_adr),
-		.adr = rt715_3_adr,
+		.adr_d = rt715_3_adr,
 	},
 	{}
 };
@@ -122,7 +192,7 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_cml_sdw_machines[] = {
 	{
 		.link_mask = 0xF, /* 4 active links required */
 		.links = cml_3_in_1_default,
-		.drv_name = "sdw_rt711_rt1308_rt715",
+		.drv_name = "sof_sdw",
 		.sof_fw_filename = "sof-cml.ri",
 		.sof_tplg_filename = "sof-cml-rt711-rt1308-rt715.tplg",
 	},
@@ -134,13 +204,14 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_cml_sdw_machines[] = {
 		 */
 		.link_mask = 0xF,
 		.links = cml_3_in_1_mono_amp,
-		.drv_name = "sdw_rt711_rt1308_rt715",
+		.drv_name = "sof_sdw",
 		.sof_fw_filename = "sof-cml.ri",
 		.sof_tplg_filename = "sof-cml-rt711-rt1308-mono-rt715.tplg",
 	},
 	{
 		.link_mask = 0x2, /* RT700 connected on Link1 */
-		.drv_name = "sdw_rt700",
+		.links = cml_rvp,
+		.drv_name = "sof_sdw",
 		.sof_fw_filename = "sof-cml.ri",
 		.sof_tplg_filename = "sof-cml-rt700.tplg",
 	},
diff --git a/sound/soc/intel/common/soc-acpi-intel-icl-match.c b/sound/soc/intel/common/soc-acpi-intel-icl-match.c
index 7527330..ef85003 100644
--- a/sound/soc/intel/common/soc-acpi-intel-icl-match.c
+++ b/sound/soc/intel/common/soc-acpi-intel-icl-match.c
@@ -33,55 +33,112 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_icl_machines[] = {
 };
 EXPORT_SYMBOL_GPL(snd_soc_acpi_intel_icl_machines);
 
-static const u64 rt700_0_adr[] = {
-	0x000010025D070000
+static const struct snd_soc_acpi_endpoint single_endpoint = {
+	.num = 0,
+	.aggregated = 0,
+	.group_position = 0,
+	.group_id = 0,
+};
+
+static const struct snd_soc_acpi_endpoint spk_l_endpoint = {
+	.num = 0,
+	.aggregated = 1,
+	.group_position = 0,
+	.group_id = 1,
+};
+
+static const struct snd_soc_acpi_endpoint spk_r_endpoint = {
+	.num = 0,
+	.aggregated = 1,
+	.group_position = 1,
+	.group_id = 1,
+};
+
+static const struct snd_soc_acpi_adr_device rt700_0_adr[] = {
+	{
+		.adr = 0x000010025D070000,
+		.num_endpoints = 1,
+		.endpoints = &single_endpoint,
+	}
 };
 
 static const struct snd_soc_acpi_link_adr icl_rvp[] = {
 	{
 		.mask = BIT(0),
 		.num_adr = ARRAY_SIZE(rt700_0_adr),
-		.adr = rt700_0_adr,
+		.adr_d = rt700_0_adr,
 	},
 	{}
 };
 
-static const u64 rt711_0_adr[] = {
-	0x000010025D071100
+static const struct snd_soc_acpi_adr_device rt711_0_adr[] = {
+	{
+		.adr = 0x000010025D071100,
+		.num_endpoints = 1,
+		.endpoints = &single_endpoint,
+	}
 };
 
-static const u64 rt1308_1_adr[] = {
-	0x000110025D130800
+static const struct snd_soc_acpi_adr_device rt1308_1_adr[] = {
+	{
+		.adr = 0x000110025D130800,
+		.num_endpoints = 1,
+		.endpoints = &single_endpoint,
+	}
 };
 
-static const u64 rt1308_2_adr[] = {
-	0x000210025D130800
+static const struct snd_soc_acpi_adr_device rt1308_2_adr[] = {
+	{
+		.adr = 0x000210025D130800,
+		.num_endpoints = 1,
+		.endpoints = &single_endpoint,
+	}
 };
 
-static const u64 rt715_3_adr[] = {
-	0x000310025D071500
+static const struct snd_soc_acpi_adr_device rt1308_1_group1_adr[] = {
+	{
+		.adr = 0x000110025D130800,
+		.num_endpoints = 1,
+		.endpoints = &spk_l_endpoint,
+	}
+};
+
+static const struct snd_soc_acpi_adr_device rt1308_2_group1_adr[] = {
+	{
+		.adr = 0x000210025D130800,
+		.num_endpoints = 1,
+		.endpoints = &spk_r_endpoint,
+	}
+};
+
+static const struct snd_soc_acpi_adr_device rt715_3_adr[] = {
+	{
+		.adr = 0x000310025D071500,
+		.num_endpoints = 1,
+		.endpoints = &single_endpoint,
+	}
 };
 
 static const struct snd_soc_acpi_link_adr icl_3_in_1_default[] = {
 	{
 		.mask = BIT(0),
 		.num_adr = ARRAY_SIZE(rt711_0_adr),
-		.adr = rt711_0_adr,
+		.adr_d = rt711_0_adr,
 	},
 	{
 		.mask = BIT(1),
-		.num_adr = ARRAY_SIZE(rt1308_1_adr),
-		.adr = rt1308_1_adr,
+		.num_adr = ARRAY_SIZE(rt1308_1_group1_adr),
+		.adr_d = rt1308_1_group1_adr,
 	},
 	{
 		.mask = BIT(2),
-		.num_adr = ARRAY_SIZE(rt1308_2_adr),
-		.adr = rt1308_2_adr,
+		.num_adr = ARRAY_SIZE(rt1308_2_group1_adr),
+		.adr_d = rt1308_2_group1_adr,
 	},
 	{
 		.mask = BIT(3),
 		.num_adr = ARRAY_SIZE(rt715_3_adr),
-		.adr = rt715_3_adr,
+		.adr_d = rt715_3_adr,
 	},
 	{}
 };
@@ -90,17 +147,17 @@ static const struct snd_soc_acpi_link_adr icl_3_in_1_mono_amp[] = {
 	{
 		.mask = BIT(0),
 		.num_adr = ARRAY_SIZE(rt711_0_adr),
-		.adr = rt711_0_adr,
+		.adr_d = rt711_0_adr,
 	},
 	{
 		.mask = BIT(1),
 		.num_adr = ARRAY_SIZE(rt1308_1_adr),
-		.adr = rt1308_1_adr,
+		.adr_d = rt1308_1_adr,
 	},
 	{
 		.mask = BIT(3),
 		.num_adr = ARRAY_SIZE(rt715_3_adr),
-		.adr = rt715_3_adr,
+		.adr_d = rt715_3_adr,
 	},
 	{}
 };
@@ -109,21 +166,21 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_icl_sdw_machines[] = {
 	{
 		.link_mask = 0xF, /* 4 active links required */
 		.links = icl_3_in_1_default,
-		.drv_name = "sdw_rt711_rt1308_rt715",
+		.drv_name = "sof_sdw",
 		.sof_fw_filename = "sof-icl.ri",
 		.sof_tplg_filename = "sof-icl-rt711-rt1308-rt715.tplg",
 	},
 	{
 		.link_mask = 0xB, /* 3 active links required */
 		.links = icl_3_in_1_mono_amp,
-		.drv_name = "sdw_rt711_rt1308_rt715",
+		.drv_name = "sof_sdw",
 		.sof_fw_filename = "sof-icl.ri",
 		.sof_tplg_filename = "sof-icl-rt711-rt1308-rt715-mono.tplg",
 	},
 	{
 		.link_mask = 0x1, /* rt700 connected on link0 */
 		.links = icl_rvp,
-		.drv_name = "sdw_rt700",
+		.drv_name = "sof_sdw",
 		.sof_fw_filename = "sof-icl.ri",
 		.sof_tplg_filename = "sof-icl-rt700.tplg",
 	},
diff --git a/sound/soc/intel/common/soc-acpi-intel-jsl-match.c b/sound/soc/intel/common/soc-acpi-intel-jsl-match.c
index ed2b125..4388a32 100644
--- a/sound/soc/intel/common/soc-acpi-intel-jsl-match.c
+++ b/sound/soc/intel/common/soc-acpi-intel-jsl-match.c
@@ -2,20 +2,50 @@
 /*
  * soc-apci-intel-jsl-match.c - tables and support for JSL ACPI enumeration.
  *
- * Copyright (c) 2019, Intel Corporation.
+ * Copyright (c) 2019-2020, Intel Corporation.
  *
  */
 
 #include <sound/soc-acpi.h>
 #include <sound/soc-acpi-intel-match.h>
 
+static struct snd_soc_acpi_codecs jsl_7219_98373_codecs = {
+	.num_codecs = 1,
+	.codecs = {"MX98373"}
+};
+
+static struct snd_soc_acpi_codecs rt1015_spk = {
+	.num_codecs = 1,
+	.codecs = {"10EC1015"}
+};
+
+/*
+ * When adding new entry to the snd_soc_acpi_intel_jsl_machines array,
+ * use .quirk_data member to distinguish different machine driver,
+ * and keep ACPI .id field unchanged for the common codec.
+ */
 struct snd_soc_acpi_mach snd_soc_acpi_intel_jsl_machines[] = {
 	{
 		.id = "DLGS7219",
 		.drv_name = "sof_da7219_max98373",
-		.machine_quirk = snd_soc_acpi_codec_list,
 		.sof_fw_filename = "sof-jsl.ri",
 		.sof_tplg_filename = "sof-jsl-da7219.tplg",
+		.machine_quirk = snd_soc_acpi_codec_list,
+		.quirk_data = &jsl_7219_98373_codecs,
+	},
+	{
+		.id = "DLGS7219",
+		.drv_name = "sof_da7219_max98360a",
+		.sof_fw_filename = "sof-jsl.ri",
+		.sof_tplg_filename = "sof-jsl-da7219-mx98360a.tplg",
+	},
+	{
+		.id = "10EC5682",
+		.drv_name = "jsl_rt5682_rt1015",
+		.sof_fw_filename = "sof-jsl.ri",
+		.machine_quirk = snd_soc_acpi_codec_list,
+		.quirk_data = &rt1015_spk,
+		.sof_tplg_filename = "sof-jsl-rt5682-rt1015.tplg",
 	},
 	{},
 };
diff --git a/sound/soc/intel/common/soc-acpi-intel-tgl-match.c b/sound/soc/intel/common/soc-acpi-intel-tgl-match.c
index 5984dd1..449d9d2 100644
--- a/sound/soc/intel/common/soc-acpi-intel-tgl-match.c
+++ b/sound/soc/intel/common/soc-acpi-intel-tgl-match.c
@@ -14,20 +14,61 @@ static struct snd_soc_acpi_codecs tgl_codecs = {
 	.codecs = {"MX98357A"}
 };
 
-static const u64 rt711_0_adr[] = {
-	0x000010025D071100
+static const struct snd_soc_acpi_endpoint single_endpoint = {
+	.num = 0,
+	.aggregated = 0,
+	.group_position = 0,
+	.group_id = 0,
 };
 
-static const u64 rt1308_1_adr[] = {
-	0x000120025D130800,
-	0x000122025D130800
+static const struct snd_soc_acpi_endpoint spk_l_endpoint = {
+	.num = 0,
+	.aggregated = 1,
+	.group_position = 0,
+	.group_id = 1,
+};
+
+static const struct snd_soc_acpi_endpoint spk_r_endpoint = {
+	.num = 0,
+	.aggregated = 1,
+	.group_position = 1,
+	.group_id = 1,
+};
+
+static const struct snd_soc_acpi_adr_device rt711_0_adr[] = {
+	{
+		.adr = 0x000010025D071100,
+		.num_endpoints = 1,
+		.endpoints = &single_endpoint,
+	}
+};
+
+static const struct snd_soc_acpi_adr_device rt1308_1_adr[] = {
+	{
+		.adr = 0x000120025D130800,
+		.num_endpoints = 1,
+		.endpoints = &spk_l_endpoint,
+	},
+	{
+		.adr = 0x000122025D130800,
+		.num_endpoints = 1,
+		.endpoints = &spk_r_endpoint,
+	}
+};
+
+static const struct snd_soc_acpi_adr_device rt5682_0_adr[] = {
+	{
+		.adr = 0x000021025D568200,
+		.num_endpoints = 1,
+		.endpoints = &single_endpoint,
+	}
 };
 
 static const struct snd_soc_acpi_link_adr tgl_i2s_rt1308[] = {
 	{
 		.mask = BIT(0),
 		.num_adr = ARRAY_SIZE(rt711_0_adr),
-		.adr = rt711_0_adr,
+		.adr_d = rt711_0_adr,
 	},
 	{}
 };
@@ -36,24 +77,38 @@ static const struct snd_soc_acpi_link_adr tgl_rvp[] = {
 	{
 		.mask = BIT(0),
 		.num_adr = ARRAY_SIZE(rt711_0_adr),
-		.adr = rt711_0_adr,
+		.adr_d = rt711_0_adr,
 	},
 	{
 		.mask = BIT(1),
 		.num_adr = ARRAY_SIZE(rt1308_1_adr),
-		.adr = rt1308_1_adr,
+		.adr_d = rt1308_1_adr,
 	},
 	{}
 };
 
+static const struct snd_soc_acpi_link_adr tgl_chromebook_base[] = {
+	{
+		.mask = BIT(0),
+		.num_adr = ARRAY_SIZE(rt5682_0_adr),
+		.adr_d = rt5682_0_adr,
+	},
+	{}
+};
+
+static struct snd_soc_acpi_codecs tgl_max98373_amp = {
+	.num_codecs = 1,
+	.codecs = {"MX98373"}
+};
+
 struct snd_soc_acpi_mach snd_soc_acpi_intel_tgl_machines[] = {
 	{
 		.id = "10EC1308",
-		.drv_name = "rt711_rt1308",
+		.drv_name = "sof_sdw",
 		.link_mask = 0x1, /* RT711 on SoundWire link0 */
 		.links = tgl_i2s_rt1308,
 		.sof_fw_filename = "sof-tgl.ri",
-		.sof_tplg_filename = "sof-tgl-rt711-rt1308.tplg",
+		.sof_tplg_filename = "sof-tgl-rt711-i2s-rt1308.tplg",
 	},
 	{
 		.id = "10EC5682",
@@ -63,6 +118,14 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_tgl_machines[] = {
 		.sof_fw_filename = "sof-tgl.ri",
 		.sof_tplg_filename = "sof-tgl-max98357a-rt5682.tplg",
 	},
+	{
+		.id = "10EC5682",
+		.drv_name = "tgl_max98373_rt5682",
+		.machine_quirk = snd_soc_acpi_codec_list,
+		.quirk_data = &tgl_max98373_amp,
+		.sof_fw_filename = "sof-tgl.ri",
+		.sof_tplg_filename = "sof-tgl-max98373-rt5682.tplg",
+	},
 	{},
 };
 EXPORT_SYMBOL_GPL(snd_soc_acpi_intel_tgl_machines);
@@ -72,10 +135,17 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_tgl_sdw_machines[] = {
 	{
 		.link_mask = 0x3, /* rt711 on link 0 and 2 rt1308s on link 1 */
 		.links = tgl_rvp,
-		.drv_name = "sdw_rt711_rt1308_rt715",
+		.drv_name = "sof_sdw",
 		.sof_fw_filename = "sof-tgl.ri",
 		.sof_tplg_filename = "sof-tgl-rt711-rt1308.tplg",
 	},
+	{
+		.link_mask = 0x1, /* this will only enable rt5682 for now */
+		.links = tgl_chromebook_base,
+		.drv_name = "sof_sdw",
+		.sof_fw_filename = "sof-tgl.ri",
+		.sof_tplg_filename = "sof-tgl-rt5682.tplg",
+	},
 	{},
 };
 EXPORT_SYMBOL_GPL(snd_soc_acpi_intel_tgl_sdw_machines);
diff --git a/sound/soc/intel/haswell/sst-haswell-pcm.c b/sound/soc/intel/haswell/sst-haswell-pcm.c
index 033d7c0..c183f8e 100644
--- a/sound/soc/intel/haswell/sst-haswell-pcm.c
+++ b/sound/soc/intel/haswell/sst-haswell-pcm.c
@@ -476,7 +476,7 @@ static int hsw_pcm_hw_params(struct snd_soc_component *component,
 	u8 channels;
 	int ret, dai;
 
-	dai = mod_map[rtd->cpu_dai->id].dai_id;
+	dai = mod_map[asoc_rtd_to_cpu(rtd, 0)->id].dai_id;
 	pcm_data = &pdata->pcm[dai][substream->stream];
 
 	/* check if we are being called a subsequent time */
@@ -494,7 +494,7 @@ static int hsw_pcm_hw_params(struct snd_soc_component *component,
 		}
 		pcm_data->allocated = false;
 
-		pcm_data->stream = sst_hsw_stream_new(hsw, rtd->cpu_dai->id,
+		pcm_data->stream = sst_hsw_stream_new(hsw, asoc_rtd_to_cpu(rtd, 0)->id,
 			hsw_notify_pointer, pcm_data);
 		if (pcm_data->stream == NULL) {
 			dev_err(rtd->dev, "error: failed to create stream\n");
@@ -509,7 +509,7 @@ static int hsw_pcm_hw_params(struct snd_soc_component *component,
 		path_id = SST_HSW_STREAM_PATH_SSP0_IN;
 
 	/* DSP stream type depends on DAI ID */
-	switch (rtd->cpu_dai->id) {
+	switch (asoc_rtd_to_cpu(rtd, 0)->id) {
 	case 0:
 		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
 			stream_type = SST_HSW_STREAM_TYPE_SYSTEM;
@@ -533,7 +533,7 @@ static int hsw_pcm_hw_params(struct snd_soc_component *component,
 		break;
 	default:
 		dev_err(rtd->dev, "error: invalid DAI ID %d\n",
-			rtd->cpu_dai->id);
+			asoc_rtd_to_cpu(rtd, 0)->id);
 		return -EINVAL;
 	}
 
@@ -595,7 +595,7 @@ static int hsw_pcm_hw_params(struct snd_soc_component *component,
 	dmab = snd_pcm_get_dma_buf(substream);
 
 	ret = create_adsp_page_table(substream, pdata, rtd, runtime->dma_area,
-		runtime->dma_bytes, rtd->cpu_dai->id);
+		runtime->dma_bytes, asoc_rtd_to_cpu(rtd, 0)->id);
 	if (ret < 0)
 		return ret;
 
@@ -608,7 +608,7 @@ static int hsw_pcm_hw_params(struct snd_soc_component *component,
 		pages = runtime->dma_bytes / PAGE_SIZE;
 
 	ret = sst_hsw_stream_buffer(hsw, pcm_data->stream,
-		pdata->dmab[rtd->cpu_dai->id][substream->stream].addr,
+		pdata->dmab[asoc_rtd_to_cpu(rtd, 0)->id][substream->stream].addr,
 		pages, runtime->dma_bytes, 0,
 		snd_sgbuf_get_addr(dmab, 0) >> PAGE_SHIFT);
 	if (ret < 0) {
@@ -661,7 +661,7 @@ static int hsw_pcm_trigger(struct snd_soc_component *component,
 	snd_pcm_uframes_t pos;
 	int dai;
 
-	dai = mod_map[rtd->cpu_dai->id].dai_id;
+	dai = mod_map[asoc_rtd_to_cpu(rtd, 0)->id].dai_id;
 	pcm_data = &pdata->pcm[dai][substream->stream];
 	sst_stream = pcm_data->stream;
 
@@ -770,7 +770,7 @@ static snd_pcm_uframes_t hsw_pcm_pointer(struct snd_soc_component *component,
 	u32 position;
 	int dai;
 
-	dai = mod_map[rtd->cpu_dai->id].dai_id;
+	dai = mod_map[asoc_rtd_to_cpu(rtd, 0)->id].dai_id;
 	pcm_data = &pdata->pcm[dai][substream->stream];
 	position = sst_hsw_get_dsp_position(hsw, pcm_data->stream);
 
@@ -791,7 +791,7 @@ static int hsw_pcm_open(struct snd_soc_component *component,
 	struct sst_hsw *hsw = pdata->hsw;
 	int dai;
 
-	dai = mod_map[rtd->cpu_dai->id].dai_id;
+	dai = mod_map[asoc_rtd_to_cpu(rtd, 0)->id].dai_id;
 	pcm_data = &pdata->pcm[dai][substream->stream];
 
 	mutex_lock(&pcm_data->mutex);
@@ -801,7 +801,7 @@ static int hsw_pcm_open(struct snd_soc_component *component,
 
 	snd_soc_set_runtime_hwparams(substream, &hsw_pcm_hardware);
 
-	pcm_data->stream = sst_hsw_stream_new(hsw, rtd->cpu_dai->id,
+	pcm_data->stream = sst_hsw_stream_new(hsw, asoc_rtd_to_cpu(rtd, 0)->id,
 		hsw_notify_pointer, pcm_data);
 	if (pcm_data->stream == NULL) {
 		dev_err(rtd->dev, "error: failed to create stream\n");
@@ -824,7 +824,7 @@ static int hsw_pcm_close(struct snd_soc_component *component,
 	struct sst_hsw *hsw = pdata->hsw;
 	int ret, dai;
 
-	dai = mod_map[rtd->cpu_dai->id].dai_id;
+	dai = mod_map[asoc_rtd_to_cpu(rtd, 0)->id].dai_id;
 	pcm_data = &pdata->pcm[dai][substream->stream];
 
 	mutex_lock(&pcm_data->mutex);
@@ -923,9 +923,9 @@ static int hsw_pcm_new(struct snd_soc_component *component,
 			hsw_pcm_hardware.buffer_bytes_max);
 	}
 	if (pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream)
-		priv_data->pcm[rtd->cpu_dai->id][SNDRV_PCM_STREAM_PLAYBACK].hsw_pcm = pcm;
+		priv_data->pcm[asoc_rtd_to_cpu(rtd, 0)->id][SNDRV_PCM_STREAM_PLAYBACK].hsw_pcm = pcm;
 	if (pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream)
-		priv_data->pcm[rtd->cpu_dai->id][SNDRV_PCM_STREAM_CAPTURE].hsw_pcm = pcm;
+		priv_data->pcm[asoc_rtd_to_cpu(rtd, 0)->id][SNDRV_PCM_STREAM_CAPTURE].hsw_pcm = pcm;
 
 	return 0;
 }
diff --git a/sound/soc/intel/skylake/bxt-sst.c b/sound/soc/intel/skylake/bxt-sst.c
index 92a82e6..38b9d74 100644
--- a/sound/soc/intel/skylake/bxt-sst.c
+++ b/sound/soc/intel/skylake/bxt-sst.c
@@ -17,7 +17,6 @@
 #include "skl.h"
 
 #define BXT_BASEFW_TIMEOUT	3000
-#define BXT_INIT_TIMEOUT	300
 #define BXT_ROM_INIT_TIMEOUT	70
 #define BXT_IPC_PURGE_FW	0x01004000
 
@@ -38,8 +37,6 @@
 /* Delay before scheduling D0i3 entry */
 #define BXT_D0I3_DELAY 5000
 
-#define BXT_FW_ROM_INIT_RETRY 3
-
 static unsigned int bxt_get_errorcode(struct sst_dsp *ctx)
 {
 	 return sst_dsp_shim_read(ctx, BXT_ADSP_ERROR_CODE);
diff --git a/sound/soc/intel/skylake/cnl-sst.c b/sound/soc/intel/skylake/cnl-sst.c
index 4f64f09..c6abcd5 100644
--- a/sound/soc/intel/skylake/cnl-sst.c
+++ b/sound/soc/intel/skylake/cnl-sst.c
@@ -57,18 +57,34 @@ static int cnl_prepare_fw(struct sst_dsp *ctx, const void *fwdata, u32 fwsize)
 	ctx->dsp_ops.stream_tag = stream_tag;
 	memcpy(ctx->dmab.area, fwdata, fwsize);
 
+	ret = skl_dsp_core_power_up(ctx, SKL_DSP_CORE0_MASK);
+	if (ret < 0) {
+		dev_err(ctx->dev, "dsp core0 power up failed\n");
+		ret = -EIO;
+		goto base_fw_load_failed;
+	}
+
 	/* purge FW request */
 	sst_dsp_shim_write(ctx, CNL_ADSP_REG_HIPCIDR,
 			   CNL_ADSP_REG_HIPCIDR_BUSY | (CNL_IPC_PURGE |
 			   ((stream_tag - 1) << CNL_ROM_CTRL_DMA_ID)));
 
-	ret = cnl_dsp_enable_core(ctx, SKL_DSP_CORE0_MASK);
+	ret = skl_dsp_start_core(ctx, SKL_DSP_CORE0_MASK);
 	if (ret < 0) {
-		dev_err(ctx->dev, "dsp boot core failed ret: %d\n", ret);
+		dev_err(ctx->dev, "Start dsp core failed ret: %d\n", ret);
 		ret = -EIO;
 		goto base_fw_load_failed;
 	}
 
+	ret = sst_dsp_register_poll(ctx, CNL_ADSP_REG_HIPCIDA,
+				    CNL_ADSP_REG_HIPCIDA_DONE,
+				    CNL_ADSP_REG_HIPCIDA_DONE,
+				    BXT_INIT_TIMEOUT, "HIPCIDA Done");
+	if (ret < 0) {
+		dev_err(ctx->dev, "timeout for purge request: %d\n", ret);
+		goto base_fw_load_failed;
+	}
+
 	/* enable interrupt */
 	cnl_ipc_int_enable(ctx);
 	cnl_ipc_op_int_enable(ctx);
@@ -109,7 +125,7 @@ static int cnl_load_base_firmware(struct sst_dsp *ctx)
 {
 	struct firmware stripped_fw;
 	struct skl_dev *cnl = ctx->thread_context;
-	int ret;
+	int ret, i;
 
 	if (!ctx->fw) {
 		ret = request_firmware(&ctx->fw, ctx->fw_name, ctx->dev);
@@ -131,12 +147,16 @@ static int cnl_load_base_firmware(struct sst_dsp *ctx)
 	stripped_fw.size = ctx->fw->size;
 	skl_dsp_strip_extended_manifest(&stripped_fw);
 
-	ret = cnl_prepare_fw(ctx, stripped_fw.data, stripped_fw.size);
-	if (ret < 0) {
-		dev_err(ctx->dev, "prepare firmware failed: %d\n", ret);
-		goto cnl_load_base_firmware_failed;
+	for (i = 0; i < BXT_FW_ROM_INIT_RETRY; i++) {
+		ret = cnl_prepare_fw(ctx, stripped_fw.data, stripped_fw.size);
+		if (!ret)
+			break;
+		dev_dbg(ctx->dev, "prepare firmware failed: %d\n", ret);
 	}
 
+	if (ret < 0)
+		goto cnl_load_base_firmware_failed;
+
 	ret = sst_transfer_fw_host_dma(ctx);
 	if (ret < 0) {
 		dev_err(ctx->dev, "transfer firmware failed: %d\n", ret);
@@ -158,6 +178,7 @@ static int cnl_load_base_firmware(struct sst_dsp *ctx)
 	return 0;
 
 cnl_load_base_firmware_failed:
+	dev_err(ctx->dev, "firmware load failed: %d\n", ret);
 	release_firmware(ctx->fw);
 	ctx->fw = NULL;
 
diff --git a/sound/soc/intel/skylake/skl-nhlt.c b/sound/soc/intel/skylake/skl-nhlt.c
index 19f328d..d9c8f5c 100644
--- a/sound/soc/intel/skylake/skl-nhlt.c
+++ b/sound/soc/intel/skylake/skl-nhlt.c
@@ -182,7 +182,8 @@ void skl_nhlt_remove_sysfs(struct skl_dev *skl)
 {
 	struct device *dev = &skl->pci->dev;
 
-	sysfs_remove_file(&dev->kobj, &dev_attr_platform_id.attr);
+	if (skl->nhlt)
+		sysfs_remove_file(&dev->kobj, &dev_attr_platform_id.attr);
 }
 
 /*
diff --git a/sound/soc/intel/skylake/skl-pcm.c b/sound/soc/intel/skylake/skl-pcm.c
index b995096..89dcccd 100644
--- a/sound/soc/intel/skylake/skl-pcm.c
+++ b/sound/soc/intel/skylake/skl-pcm.c
@@ -112,10 +112,7 @@ static void skl_set_suspend_active(struct snd_pcm_substream *substream,
 	struct snd_soc_dapm_widget *w;
 	struct skl_dev *skl = bus_to_skl(bus);
 
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-		w = dai->playback_widget;
-	else
-		w = dai->capture_widget;
+	w = snd_soc_dai_get_widget(dai, substream->stream);
 
 	if (w->ignore_suspend && enable)
 		skl->supend_active++;
@@ -475,10 +472,7 @@ static int skl_pcm_trigger(struct snd_pcm_substream *substream, int cmd,
 	if (!mconfig)
 		return -EIO;
 
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-		w = dai->playback_widget;
-	else
-		w = dai->capture_widget;
+	w = snd_soc_dai_get_widget(dai, substream->stream);
 
 	switch (cmd) {
 	case SNDRV_PCM_TRIGGER_RESUME:
@@ -551,7 +545,7 @@ static int skl_link_hw_params(struct snd_pcm_substream *substream,
 	struct hdac_bus *bus = dev_get_drvdata(dai->dev);
 	struct hdac_ext_stream *link_dev;
 	struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	struct skl_pipe_params p_params = {0};
 	struct hdac_ext_link *link;
 	int stream_tag;
@@ -650,7 +644,7 @@ static int skl_link_hw_free(struct snd_pcm_substream *substream,
 
 	link_dev->link_prepared = 0;
 
-	link = snd_hdac_ext_bus_get_link(bus, rtd->codec_dai->component->name);
+	link = snd_hdac_ext_bus_get_link(bus, asoc_rtd_to_codec(rtd, 0)->component->name);
 	if (!link)
 		return -EINVAL;
 
@@ -1080,7 +1074,7 @@ static int skl_platform_soc_open(struct snd_soc_component *component,
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_dai_link *dai_link = rtd->dai_link;
 
-	dev_dbg(rtd->cpu_dai->dev, "In %s:%s\n", __func__,
+	dev_dbg(asoc_rtd_to_cpu(rtd, 0)->dev, "In %s:%s\n", __func__,
 					dai_link->cpus->dai_name);
 
 	snd_soc_set_runtime_hwparams(substream, &azx_pcm_hw);
@@ -1232,7 +1226,7 @@ static u64 skl_adjust_codec_delay(struct snd_pcm_substream *substream,
 				u64 nsec)
 {
 	struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	u64 codec_frames, codec_nsecs;
 
 	if (!codec_dai->driver->ops->delay)
@@ -1287,7 +1281,7 @@ static int skl_platform_soc_get_time_info(
 static int skl_platform_soc_new(struct snd_soc_component *component,
 				struct snd_soc_pcm_runtime *rtd)
 {
-	struct snd_soc_dai *dai = rtd->cpu_dai;
+	struct snd_soc_dai *dai = asoc_rtd_to_cpu(rtd, 0);
 	struct hdac_bus *bus = dev_get_drvdata(dai->dev);
 	struct snd_pcm *pcm = rtd->pcm;
 	unsigned int size;
diff --git a/sound/soc/intel/skylake/skl-sst-dsp.h b/sound/soc/intel/skylake/skl-sst-dsp.h
index cdfec0f..1df9ef4 100644
--- a/sound/soc/intel/skylake/skl-sst-dsp.h
+++ b/sound/soc/intel/skylake/skl-sst-dsp.h
@@ -67,6 +67,8 @@ struct skl_dev;
 
 #define SKL_FW_INIT			0x1
 #define SKL_FW_RFW_START		0xf
+#define BXT_FW_ROM_INIT_RETRY		3
+#define BXT_INIT_TIMEOUT		300
 
 #define SKL_ADSPIC_IPC			1
 #define SKL_ADSPIS_IPC			1
diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c
index f755ca2..63182bf 100644
--- a/sound/soc/intel/skylake/skl.c
+++ b/sound/soc/intel/skylake/skl.c
@@ -130,6 +130,7 @@ static int skl_init_chip(struct hdac_bus *bus, bool full_reset)
 	struct hdac_ext_link *hlink;
 	int ret;
 
+	snd_hdac_set_codec_wakeup(bus, true);
 	skl_enable_miscbdcge(bus->dev, false);
 	ret = snd_hdac_bus_init_chip(bus, full_reset);
 
@@ -138,6 +139,7 @@ static int skl_init_chip(struct hdac_bus *bus, bool full_reset)
 		writel(0, hlink->ml_addr + AZX_REG_ML_LOSIDV);
 
 	skl_enable_miscbdcge(bus->dev, true);
+	snd_hdac_set_codec_wakeup(bus, false);
 
 	return ret;
 }
@@ -359,7 +361,7 @@ static int skl_resume(struct device *dev)
 	struct pci_dev *pci = to_pci_dev(dev);
 	struct hdac_bus *bus = pci_get_drvdata(pci);
 	struct skl_dev *skl  = bus_to_skl(bus);
-	struct hdac_ext_link *hlink = NULL;
+	struct hdac_ext_link *hlink;
 	int ret;
 
 	/*
@@ -481,13 +483,8 @@ static struct skl_ssp_clk skl_ssp_clks[] = {
 static struct snd_soc_acpi_mach *skl_find_hda_machine(struct skl_dev *skl,
 					struct snd_soc_acpi_mach *machines)
 {
-	struct hdac_bus *bus = skl_to_bus(skl);
 	struct snd_soc_acpi_mach *mach;
 
-	/* check if we have any codecs detected on bus */
-	if (bus->codec_mask == 0)
-		return NULL;
-
 	/* point to common table */
 	mach = snd_soc_acpi_intel_hda_machines;
 
@@ -636,6 +633,9 @@ static int skl_clock_device_register(struct skl_dev *skl)
 	struct platform_device_info pdevinfo = {NULL};
 	struct skl_clk_pdata *clk_pdata;
 
+	if (!skl->nhlt)
+		return 0;
+
 	clk_pdata = devm_kzalloc(&skl->pci->dev, sizeof(*clk_pdata),
 							GFP_KERNEL);
 	if (!clk_pdata)
@@ -794,7 +794,7 @@ static void skl_probe_work(struct work_struct *work)
 {
 	struct skl_dev *skl = container_of(work, struct skl_dev, probe_work);
 	struct hdac_bus *bus = skl_to_bus(skl);
-	struct hdac_ext_link *hlink = NULL;
+	struct hdac_ext_link *hlink;
 	int err;
 
 	if (IS_ENABLED(CONFIG_SND_SOC_HDAC_HDMI)) {
@@ -803,6 +803,9 @@ static void skl_probe_work(struct work_struct *work)
 			return;
 	}
 
+	skl_init_pci(skl);
+	skl_dum_set(bus);
+
 	err = skl_init_chip(bus, true);
 	if (err < 0) {
 		dev_err(bus->dev, "Init chip failed with err: %d\n", err);
@@ -918,8 +921,6 @@ static int skl_first_init(struct hdac_bus *bus)
 		return -ENXIO;
 	}
 
-	snd_hdac_bus_reset_link(bus, true);
-
 	snd_hdac_bus_parse_capabilities(bus);
 
 	/* check if PPCAP exists */
@@ -967,11 +968,7 @@ static int skl_first_init(struct hdac_bus *bus)
 	if (err < 0)
 		return err;
 
-	/* initialize chip */
-	skl_init_pci(skl);
-	skl_dum_set(bus);
-
-	return skl_init_chip(bus, true);
+	return 0;
 }
 
 static int skl_probe(struct pci_dev *pci,
@@ -1064,8 +1061,6 @@ static int skl_probe(struct pci_dev *pci,
 	if (bus->mlcap)
 		snd_hdac_ext_bus_get_ml_capabilities(bus);
 
-	snd_hdac_bus_stop_chip(bus);
-
 	/* create device for soc dmic */
 	err = skl_dmic_device_register(skl);
 	if (err < 0) {
@@ -1082,7 +1077,8 @@ static int skl_probe(struct pci_dev *pci,
 out_clk_free:
 	skl_clock_device_unregister(skl);
 out_nhlt_free:
-	intel_nhlt_free(skl->nhlt);
+	if (skl->nhlt)
+		intel_nhlt_free(skl->nhlt);
 out_free:
 	skl_free(bus);
 
@@ -1131,7 +1127,8 @@ static void skl_remove(struct pci_dev *pci)
 	skl_dmic_device_unregister(skl);
 	skl_clock_device_unregister(skl);
 	skl_nhlt_remove_sysfs(skl);
-	intel_nhlt_free(skl->nhlt);
+	if (skl->nhlt)
+		intel_nhlt_free(skl->nhlt);
 	skl_free(bus);
 	dev_set_drvdata(&pci->dev, NULL);
 }
diff --git a/sound/soc/jz4740/jz4740-i2s.c b/sound/soc/jz4740/jz4740-i2s.c
index 9d54058..6f6f8da 100644
--- a/sound/soc/jz4740/jz4740-i2s.c
+++ b/sound/soc/jz4740/jz4740-i2s.c
@@ -49,12 +49,8 @@
 
 #define JZ_AIC_CONF_FIFO_RX_THRESHOLD_OFFSET 12
 #define JZ_AIC_CONF_FIFO_TX_THRESHOLD_OFFSET 8
-#define JZ4780_AIC_CONF_FIFO_RX_THRESHOLD_OFFSET 24
-#define JZ4780_AIC_CONF_FIFO_TX_THRESHOLD_OFFSET 16
-#define JZ4780_AIC_CONF_FIFO_RX_THRESHOLD_MASK \
-			(0xf << JZ4780_AIC_CONF_FIFO_RX_THRESHOLD_OFFSET)
-#define JZ4780_AIC_CONF_FIFO_TX_THRESHOLD_MASK \
-			(0x1f <<  JZ4780_AIC_CONF_FIFO_TX_THRESHOLD_OFFSET)
+#define JZ4760_AIC_CONF_FIFO_RX_THRESHOLD_OFFSET 24
+#define JZ4760_AIC_CONF_FIFO_TX_THRESHOLD_OFFSET 16
 
 #define JZ_AIC_CTRL_OUTPUT_SAMPLE_SIZE_MASK (0x7 << 19)
 #define JZ_AIC_CTRL_INPUT_SAMPLE_SIZE_MASK (0x7 << 16)
@@ -83,16 +79,23 @@
 #define JZ_AIC_I2S_STATUS_BUSY BIT(2)
 
 #define JZ_AIC_CLK_DIV_MASK 0xf
-#define I2SDIV_DV_SHIFT 8
+#define I2SDIV_DV_SHIFT 0
 #define I2SDIV_DV_MASK (0xf << I2SDIV_DV_SHIFT)
 #define I2SDIV_IDV_SHIFT 8
 #define I2SDIV_IDV_MASK (0xf << I2SDIV_IDV_SHIFT)
 
 enum jz47xx_i2s_version {
 	JZ_I2S_JZ4740,
+	JZ_I2S_JZ4760,
+	JZ_I2S_JZ4770,
 	JZ_I2S_JZ4780,
 };
 
+struct i2s_soc_info {
+	enum jz47xx_i2s_version version;
+	struct snd_soc_dai_driver *dai;
+};
+
 struct jz4740_i2s {
 	struct resource *mem;
 	void __iomem *base;
@@ -104,7 +107,7 @@ struct jz4740_i2s {
 	struct snd_dmaengine_dai_dma_data playback_dma_data;
 	struct snd_dmaengine_dai_dma_data capture_dma_data;
 
-	enum jz47xx_i2s_version version;
+	const struct i2s_soc_info *soc_info;
 };
 
 static inline uint32_t jz4740_i2s_read(const struct jz4740_i2s *i2s,
@@ -284,7 +287,7 @@ static int jz4740_i2s_hw_params(struct snd_pcm_substream *substream,
 		ctrl &= ~JZ_AIC_CTRL_INPUT_SAMPLE_SIZE_MASK;
 		ctrl |= sample_size << JZ_AIC_CTRL_INPUT_SAMPLE_SIZE_OFFSET;
 
-		if (i2s->version >= JZ_I2S_JZ4780) {
+		if (i2s->soc_info->version >= JZ_I2S_JZ4770) {
 			div_reg &= ~I2SDIV_IDV_MASK;
 			div_reg |= (div - 1) << I2SDIV_IDV_SHIFT;
 		} else {
@@ -398,9 +401,9 @@ static int jz4740_i2s_dai_probe(struct snd_soc_dai *dai)
 	snd_soc_dai_init_dma_data(dai, &i2s->playback_dma_data,
 		&i2s->capture_dma_data);
 
-	if (i2s->version >= JZ_I2S_JZ4780) {
-		conf = (7 << JZ4780_AIC_CONF_FIFO_RX_THRESHOLD_OFFSET) |
-			(8 << JZ4780_AIC_CONF_FIFO_TX_THRESHOLD_OFFSET) |
+	if (i2s->soc_info->version >= JZ_I2S_JZ4760) {
+		conf = (7 << JZ4760_AIC_CONF_FIFO_RX_THRESHOLD_OFFSET) |
+			(8 << JZ4760_AIC_CONF_FIFO_TX_THRESHOLD_OFFSET) |
 			JZ_AIC_CONF_OVERFLOW_PLAY_LAST |
 			JZ_AIC_CONF_I2S |
 			JZ_AIC_CONF_INTERNAL_CODEC;
@@ -457,7 +460,17 @@ static struct snd_soc_dai_driver jz4740_i2s_dai = {
 	.ops = &jz4740_i2s_dai_ops,
 };
 
-static struct snd_soc_dai_driver jz4780_i2s_dai = {
+static const struct i2s_soc_info jz4740_i2s_soc_info = {
+	.version = JZ_I2S_JZ4740,
+	.dai = &jz4740_i2s_dai,
+};
+
+static const struct i2s_soc_info jz4760_i2s_soc_info = {
+	.version = JZ_I2S_JZ4760,
+	.dai = &jz4740_i2s_dai,
+};
+
+static struct snd_soc_dai_driver jz4770_i2s_dai = {
 	.probe = jz4740_i2s_dai_probe,
 	.remove = jz4740_i2s_dai_remove,
 	.playback = {
@@ -475,6 +488,16 @@ static struct snd_soc_dai_driver jz4780_i2s_dai = {
 	.ops = &jz4740_i2s_dai_ops,
 };
 
+static const struct i2s_soc_info jz4770_i2s_soc_info = {
+	.version = JZ_I2S_JZ4770,
+	.dai = &jz4770_i2s_dai,
+};
+
+static const struct i2s_soc_info jz4780_i2s_soc_info = {
+	.version = JZ_I2S_JZ4780,
+	.dai = &jz4770_i2s_dai,
+};
+
 static const struct snd_soc_component_driver jz4740_i2s_component = {
 	.name		= "jz4740-i2s",
 	.suspend	= jz4740_i2s_suspend,
@@ -483,8 +506,10 @@ static const struct snd_soc_component_driver jz4740_i2s_component = {
 
 #ifdef CONFIG_OF
 static const struct of_device_id jz4740_of_matches[] = {
-	{ .compatible = "ingenic,jz4740-i2s", .data = (void *)JZ_I2S_JZ4740 },
-	{ .compatible = "ingenic,jz4780-i2s", .data = (void *)JZ_I2S_JZ4780 },
+	{ .compatible = "ingenic,jz4740-i2s", .data = &jz4740_i2s_soc_info },
+	{ .compatible = "ingenic,jz4760-i2s", .data = &jz4760_i2s_soc_info },
+	{ .compatible = "ingenic,jz4770-i2s", .data = &jz4770_i2s_soc_info },
+	{ .compatible = "ingenic,jz4780-i2s", .data = &jz4780_i2s_soc_info },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, jz4740_of_matches);
@@ -492,45 +517,40 @@ MODULE_DEVICE_TABLE(of, jz4740_of_matches);
 
 static int jz4740_i2s_dev_probe(struct platform_device *pdev)
 {
+	struct device *dev = &pdev->dev;
 	struct jz4740_i2s *i2s;
 	struct resource *mem;
 	int ret;
 
-	i2s = devm_kzalloc(&pdev->dev, sizeof(*i2s), GFP_KERNEL);
+	i2s = devm_kzalloc(dev, sizeof(*i2s), GFP_KERNEL);
 	if (!i2s)
 		return -ENOMEM;
 
-	i2s->version =
-		(enum jz47xx_i2s_version)of_device_get_match_data(&pdev->dev);
+	i2s->soc_info = device_get_match_data(dev);
 
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	i2s->base = devm_ioremap_resource(&pdev->dev, mem);
+	i2s->base = devm_ioremap_resource(dev, mem);
 	if (IS_ERR(i2s->base))
 		return PTR_ERR(i2s->base);
 
 	i2s->phys_base = mem->start;
 
-	i2s->clk_aic = devm_clk_get(&pdev->dev, "aic");
+	i2s->clk_aic = devm_clk_get(dev, "aic");
 	if (IS_ERR(i2s->clk_aic))
 		return PTR_ERR(i2s->clk_aic);
 
-	i2s->clk_i2s = devm_clk_get(&pdev->dev, "i2s");
+	i2s->clk_i2s = devm_clk_get(dev, "i2s");
 	if (IS_ERR(i2s->clk_i2s))
 		return PTR_ERR(i2s->clk_i2s);
 
 	platform_set_drvdata(pdev, i2s);
 
-	if (i2s->version == JZ_I2S_JZ4780)
-		ret = devm_snd_soc_register_component(&pdev->dev,
-			&jz4740_i2s_component, &jz4780_i2s_dai, 1);
-	else
-		ret = devm_snd_soc_register_component(&pdev->dev,
-			&jz4740_i2s_component, &jz4740_i2s_dai, 1);
-
+	ret = devm_snd_soc_register_component(dev, &jz4740_i2s_component,
+					      i2s->soc_info->dai, 1);
 	if (ret)
 		return ret;
 
-	return devm_snd_dmaengine_pcm_register(&pdev->dev, NULL,
+	return devm_snd_dmaengine_pcm_register(dev, NULL,
 		SND_DMAENGINE_PCM_FLAG_COMPAT);
 }
 
diff --git a/sound/soc/kirkwood/armada-370-db.c b/sound/soc/kirkwood/armada-370-db.c
index 8c3c808..4f66b01 100644
--- a/sound/soc/kirkwood/armada-370-db.c
+++ b/sound/soc/kirkwood/armada-370-db.c
@@ -19,7 +19,7 @@ static int a370db_hw_params(struct snd_pcm_substream *substream,
 			    struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	unsigned int freq;
 
 	switch (params_rate(params)) {
diff --git a/sound/soc/kirkwood/kirkwood-dma.c b/sound/soc/kirkwood/kirkwood-dma.c
index f882b40..e037826b 100644
--- a/sound/soc/kirkwood/kirkwood-dma.c
+++ b/sound/soc/kirkwood/kirkwood-dma.c
@@ -20,7 +20,7 @@
 static struct kirkwood_dma_data *kirkwood_priv(struct snd_pcm_substream *subs)
 {
 	struct snd_soc_pcm_runtime *soc_runtime = subs->private_data;
-	return snd_soc_dai_get_drvdata(soc_runtime->cpu_dai);
+	return snd_soc_dai_get_drvdata(asoc_rtd_to_cpu(soc_runtime, 0));
 }
 
 static const struct snd_pcm_hardware kirkwood_dma_snd_hw = {
diff --git a/sound/soc/mediatek/common/mtk-afe-fe-dai.c b/sound/soc/mediatek/common/mtk-afe-fe-dai.c
index 4254f3a..375e3b4 100644
--- a/sound/soc/mediatek/common/mtk-afe-fe-dai.c
+++ b/sound/soc/mediatek/common/mtk-afe-fe-dai.c
@@ -40,7 +40,7 @@ int mtk_afe_fe_startup(struct snd_pcm_substream *substream,
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct mtk_base_afe *afe = snd_soc_dai_get_drvdata(dai);
 	struct snd_pcm_runtime *runtime = substream->runtime;
-	int memif_num = rtd->cpu_dai->id;
+	int memif_num = asoc_rtd_to_cpu(rtd, 0)->id;
 	struct mtk_base_afe_memif *memif = &afe->memif[memif_num];
 	const struct snd_pcm_hardware *mtk_afe_hardware = afe->mtk_afe_hardware;
 	int ret;
@@ -100,7 +100,7 @@ void mtk_afe_fe_shutdown(struct snd_pcm_substream *substream,
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct mtk_base_afe *afe = snd_soc_dai_get_drvdata(dai);
-	struct mtk_base_afe_memif *memif = &afe->memif[rtd->cpu_dai->id];
+	struct mtk_base_afe_memif *memif = &afe->memif[asoc_rtd_to_cpu(rtd, 0)->id];
 	int irq_id;
 
 	irq_id = memif->irq_usage;
@@ -122,7 +122,7 @@ int mtk_afe_fe_hw_params(struct snd_pcm_substream *substream,
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct mtk_base_afe *afe = snd_soc_dai_get_drvdata(dai);
-	int id = rtd->cpu_dai->id;
+	int id = asoc_rtd_to_cpu(rtd, 0)->id;
 	struct mtk_base_afe_memif *memif = &afe->memif[id];
 	int ret;
 	unsigned int channels = params_channels(params);
@@ -199,7 +199,7 @@ int mtk_afe_fe_trigger(struct snd_pcm_substream *substream, int cmd,
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_pcm_runtime * const runtime = substream->runtime;
 	struct mtk_base_afe *afe = snd_soc_dai_get_drvdata(dai);
-	int id = rtd->cpu_dai->id;
+	int id = asoc_rtd_to_cpu(rtd, 0)->id;
 	struct mtk_base_afe_memif *memif = &afe->memif[id];
 	struct mtk_base_afe_irq *irqs = &afe->irqs[memif->irq_usage];
 	const struct mtk_base_irq_data *irq_data = irqs->irq_data;
@@ -265,7 +265,7 @@ int mtk_afe_fe_prepare(struct snd_pcm_substream *substream,
 {
 	struct snd_soc_pcm_runtime *rtd  = substream->private_data;
 	struct mtk_base_afe *afe = snd_soc_dai_get_drvdata(dai);
-	int id = rtd->cpu_dai->id;
+	int id = asoc_rtd_to_cpu(rtd, 0)->id;
 	int pbuf_size;
 
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
diff --git a/sound/soc/mediatek/common/mtk-afe-platform-driver.c b/sound/soc/mediatek/common/mtk-afe-platform-driver.c
index 44dfef7..0a1a65c 100644
--- a/sound/soc/mediatek/common/mtk-afe-platform-driver.c
+++ b/sound/soc/mediatek/common/mtk-afe-platform-driver.c
@@ -82,7 +82,7 @@ snd_pcm_uframes_t mtk_afe_pcm_pointer(struct snd_soc_component *component,
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct mtk_base_afe *afe = snd_soc_component_get_drvdata(component);
-	struct mtk_base_afe_memif *memif = &afe->memif[rtd->cpu_dai->id];
+	struct mtk_base_afe_memif *memif = &afe->memif[asoc_rtd_to_cpu(rtd, 0)->id];
 	const struct mtk_base_memif_data *memif_data = memif->data;
 	struct regmap *regmap = afe->regmap;
 	struct device *dev = afe->dev;
diff --git a/sound/soc/mediatek/mt2701/mt2701-afe-pcm.c b/sound/soc/mediatek/mt2701/mt2701-afe-pcm.c
index 488603a..f0250b0 100644
--- a/sound/soc/mediatek/mt2701/mt2701-afe-pcm.c
+++ b/sound/soc/mediatek/mt2701/mt2701-afe-pcm.c
@@ -497,7 +497,7 @@ static int mt2701_memif_fs(struct snd_pcm_substream *substream,
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	int fs;
 
-	if (rtd->cpu_dai->id != MT2701_MEMIF_ULBT)
+	if (asoc_rtd_to_cpu(rtd, 0)->id != MT2701_MEMIF_ULBT)
 		fs = mt2701_afe_i2s_fs(rate);
 	else
 		fs = (rate == 16000 ? 1 : 0);
diff --git a/sound/soc/mediatek/mt2701/mt2701-cs42448.c b/sound/soc/mediatek/mt2701/mt2701-cs42448.c
index b694179..c47af9b6 100644
--- a/sound/soc/mediatek/mt2701/mt2701-cs42448.c
+++ b/sound/soc/mediatek/mt2701/mt2701-cs42448.c
@@ -128,8 +128,8 @@ static int mt2701_cs42448_be_ops_hw_params(struct snd_pcm_substream *substream,
 					   struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	unsigned int mclk_rate;
 	unsigned int rate = params_rate(params);
 	unsigned int div_mclk_over_bck = rate > 192000 ? 2 : 4;
diff --git a/sound/soc/mediatek/mt2701/mt2701-wm8960.c b/sound/soc/mediatek/mt2701/mt2701-wm8960.c
index 8c4c89e..0122e7d 100644
--- a/sound/soc/mediatek/mt2701/mt2701-wm8960.c
+++ b/sound/soc/mediatek/mt2701/mt2701-wm8960.c
@@ -25,8 +25,8 @@ static int mt2701_wm8960_be_ops_hw_params(struct snd_pcm_substream *substream,
 					  struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	unsigned int mclk_rate;
 	unsigned int rate = params_rate(params);
 	unsigned int div_mclk_over_bck = rate > 192000 ? 2 : 4;
diff --git a/sound/soc/mediatek/mt6797/mt6797-afe-pcm.c b/sound/soc/mediatek/mt6797/mt6797-afe-pcm.c
index 378bfc1..7f93055 100644
--- a/sound/soc/mediatek/mt6797/mt6797-afe-pcm.c
+++ b/sound/soc/mediatek/mt6797/mt6797-afe-pcm.c
@@ -143,7 +143,7 @@ static int mt6797_memif_fs(struct snd_pcm_substream *substream,
 	struct snd_soc_component *component =
 		snd_soc_rtdcom_lookup(rtd, AFE_PCM_NAME);
 	struct mtk_base_afe *afe = snd_soc_component_get_drvdata(component);
-	int id = rtd->cpu_dai->id;
+	int id = asoc_rtd_to_cpu(rtd, 0)->id;
 
 	return mt6797_rate_transform(afe->dev, rate, id);
 }
diff --git a/sound/soc/mediatek/mt8173/mt8173-afe-pcm.c b/sound/soc/mediatek/mt8173/mt8173-afe-pcm.c
index 461e4de..1e3f2d7 100644
--- a/sound/soc/mediatek/mt8173/mt8173-afe-pcm.c
+++ b/sound/soc/mediatek/mt8173/mt8173-afe-pcm.c
@@ -485,7 +485,7 @@ static int mt8173_memif_fs(struct snd_pcm_substream *substream,
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_component *component = snd_soc_rtdcom_lookup(rtd, AFE_PCM_NAME);
 	struct mtk_base_afe *afe = snd_soc_component_get_drvdata(component);
-	struct mtk_base_afe_memif *memif = &afe->memif[rtd->cpu_dai->id];
+	struct mtk_base_afe_memif *memif = &afe->memif[asoc_rtd_to_cpu(rtd, 0)->id];
 	int fs;
 
 	if (memif->data->id == MT8173_AFE_MEMIF_DAI ||
diff --git a/sound/soc/mediatek/mt8173/mt8173-max98090.c b/sound/soc/mediatek/mt8173/mt8173-max98090.c
index 22c0060..37693d3 100644
--- a/sound/soc/mediatek/mt8173/mt8173-max98090.c
+++ b/sound/soc/mediatek/mt8173/mt8173-max98090.c
@@ -53,7 +53,7 @@ static int mt8173_max98090_hw_params(struct snd_pcm_substream *substream,
 				     struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 
 	return snd_soc_dai_set_sysclk(codec_dai, 0, params_rate(params) * 256,
 				      SND_SOC_CLOCK_IN);
@@ -67,7 +67,7 @@ static int mt8173_max98090_init(struct snd_soc_pcm_runtime *runtime)
 {
 	int ret;
 	struct snd_soc_card *card = runtime->card;
-	struct snd_soc_component *component = runtime->codec_dai->component;
+	struct snd_soc_component *component = asoc_rtd_to_codec(runtime, 0)->component;
 
 	/* enable jack detection */
 	ret = snd_soc_card_jack_new(card, "Headphone", SND_JACK_HEADPHONE,
diff --git a/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5514.c b/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5514.c
index 2e1e61d..51009a1 100644
--- a/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5514.c
+++ b/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5514.c
@@ -47,7 +47,7 @@ static int mt8173_rt5650_rt5514_hw_params(struct snd_pcm_substream *substream,
 	struct snd_soc_dai *codec_dai;
 	int i, ret;
 
-	for_each_rtd_codec_dai(rtd, i, codec_dai) {
+	for_each_rtd_codec_dais(rtd, i, codec_dai) {
 		/* pll from mclk 12.288M */
 		ret = snd_soc_dai_set_pll(codec_dai, 0, 0, MCLK_FOR_CODECS,
 					  params_rate(params) * 512);
@@ -73,7 +73,7 @@ static struct snd_soc_jack mt8173_rt5650_rt5514_jack;
 static int mt8173_rt5650_rt5514_init(struct snd_soc_pcm_runtime *runtime)
 {
 	struct snd_soc_card *card = runtime->card;
-	struct snd_soc_component *component = runtime->codec_dais[0]->component;
+	struct snd_soc_component *component = asoc_rtd_to_codec(runtime, 0)->component;
 	int ret;
 
 	rt5645_sel_asrc_clk_src(component,
diff --git a/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5676.c b/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5676.c
index ebcc0b8..247ac76 100644
--- a/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5676.c
+++ b/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5676.c
@@ -51,7 +51,7 @@ static int mt8173_rt5650_rt5676_hw_params(struct snd_pcm_substream *substream,
 	struct snd_soc_dai *codec_dai;
 	int i, ret;
 
-	for_each_rtd_codec_dai(rtd, i, codec_dai) {
+	for_each_rtd_codec_dais(rtd, i, codec_dai) {
 		/* pll from mclk 12.288M */
 		ret = snd_soc_dai_set_pll(codec_dai, 0, 0, MCLK_FOR_CODECS,
 					  params_rate(params) * 512);
@@ -77,8 +77,8 @@ static struct snd_soc_jack mt8173_rt5650_rt5676_jack;
 static int mt8173_rt5650_rt5676_init(struct snd_soc_pcm_runtime *runtime)
 {
 	struct snd_soc_card *card = runtime->card;
-	struct snd_soc_component *component = runtime->codec_dais[0]->component;
-	struct snd_soc_component *component_sub = runtime->codec_dais[1]->component;
+	struct snd_soc_component *component = asoc_rtd_to_codec(runtime, 0)->component;
+	struct snd_soc_component *component_sub = asoc_rtd_to_codec(runtime, 1)->component;
 	int ret;
 
 	rt5645_sel_asrc_clk_src(component,
diff --git a/sound/soc/mediatek/mt8173/mt8173-rt5650.c b/sound/soc/mediatek/mt8173/mt8173-rt5650.c
index ef6f236..2065c94 100644
--- a/sound/soc/mediatek/mt8173/mt8173-rt5650.c
+++ b/sound/soc/mediatek/mt8173/mt8173-rt5650.c
@@ -11,6 +11,7 @@
 #include <linux/of_gpio.h>
 #include <sound/soc.h>
 #include <sound/jack.h>
+#include <sound/hdmi-codec.h>
 #include "../../codecs/rt5645.h"
 
 #define MCLK_FOR_CODECS		12288000
@@ -77,7 +78,7 @@ static int mt8173_rt5650_hw_params(struct snd_pcm_substream *substream,
 		break;
 	}
 
-	for_each_rtd_codec_dai(rtd, i, codec_dai) {
+	for_each_rtd_codec_dais(rtd, i, codec_dai) {
 		/* pll from mclk */
 		ret = snd_soc_dai_set_pll(codec_dai, 0, 0, mclk_clock,
 					  params_rate(params) * 512);
@@ -98,13 +99,13 @@ static const struct snd_soc_ops mt8173_rt5650_ops = {
 	.hw_params = mt8173_rt5650_hw_params,
 };
 
-static struct snd_soc_jack mt8173_rt5650_jack;
+static struct snd_soc_jack mt8173_rt5650_jack, mt8173_rt5650_hdmi_jack;
 
 static int mt8173_rt5650_init(struct snd_soc_pcm_runtime *runtime)
 {
 	struct snd_soc_card *card = runtime->card;
-	struct snd_soc_component *component = runtime->codec_dais[0]->component;
-	const char *codec_capture_dai = runtime->codec_dais[1]->name;
+	struct snd_soc_component *component = asoc_rtd_to_codec(runtime, 0)->component;
+	const char *codec_capture_dai = asoc_rtd_to_codec(runtime, 1)->name;
 	int ret;
 
 	rt5645_sel_asrc_clk_src(component,
@@ -144,6 +145,19 @@ static int mt8173_rt5650_init(struct snd_soc_pcm_runtime *runtime)
 				      &mt8173_rt5650_jack);
 }
 
+static int mt8173_rt5650_hdmi_init(struct snd_soc_pcm_runtime *rtd)
+{
+	int ret;
+
+	ret = snd_soc_card_jack_new(rtd->card, "HDMI Jack", SND_JACK_LINEOUT,
+				    &mt8173_rt5650_hdmi_jack, NULL, 0);
+	if (ret)
+		return ret;
+
+	return hdmi_codec_set_jack_detect(asoc_rtd_to_codec(rtd, 0)->component,
+					  &mt8173_rt5650_hdmi_jack);
+}
+
 enum {
 	DAI_LINK_PLAYBACK,
 	DAI_LINK_CAPTURE,
@@ -222,6 +236,7 @@ static struct snd_soc_dai_link mt8173_rt5650_dais[] = {
 		.name = "HDMI BE",
 		.no_pcm = 1,
 		.dpcm_playback = 1,
+		.init = mt8173_rt5650_hdmi_init,
 		SND_SOC_DAILINK_REG(hdmi_be),
 	},
 };
diff --git a/sound/soc/mediatek/mt8183/mt8183-afe-pcm.c b/sound/soc/mediatek/mt8183/mt8183-afe-pcm.c
index 6e2270b..c8ded53 100644
--- a/sound/soc/mediatek/mt8183/mt8183-afe-pcm.c
+++ b/sound/soc/mediatek/mt8183/mt8183-afe-pcm.c
@@ -146,7 +146,7 @@ static int mt8183_memif_fs(struct snd_pcm_substream *substream,
 	struct snd_soc_component *component =
 		snd_soc_rtdcom_lookup(rtd, AFE_PCM_NAME);
 	struct mtk_base_afe *afe = snd_soc_component_get_drvdata(component);
-	int id = rtd->cpu_dai->id;
+	int id = asoc_rtd_to_cpu(rtd, 0)->id;
 
 	return mt8183_rate_transform(afe->dev, rate, id);
 }
diff --git a/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c b/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c
index c654937..5b3dfa7 100644
--- a/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c
+++ b/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c
@@ -16,7 +16,9 @@
 #include "../../codecs/da7219-aad.h"
 #include "../../codecs/da7219.h"
 
-static struct snd_soc_jack headset_jack;
+struct mt8183_da7219_max98357_priv {
+	struct snd_soc_jack headset_jack;
+};
 
 static int mt8183_mt6358_i2s_hw_params(struct snd_pcm_substream *substream,
 				       struct snd_pcm_hw_params *params)
@@ -26,7 +28,7 @@ static int mt8183_mt6358_i2s_hw_params(struct snd_pcm_substream *substream,
 	unsigned int mclk_fs_ratio = 128;
 	unsigned int mclk_fs = rate * mclk_fs_ratio;
 
-	return snd_soc_dai_set_sysclk(rtd->cpu_dai,
+	return snd_soc_dai_set_sysclk(asoc_rtd_to_cpu(rtd, 0),
 				      0, mclk_fs, SND_SOC_CLOCK_OUT);
 }
 
@@ -38,19 +40,19 @@ static int mt8183_da7219_i2s_hw_params(struct snd_pcm_substream *substream,
 				       struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai;
 	unsigned int rate = params_rate(params);
 	unsigned int mclk_fs_ratio = 256;
 	unsigned int mclk_fs = rate * mclk_fs_ratio;
 	unsigned int freq;
 	int ret = 0, j;
 
-	ret = snd_soc_dai_set_sysclk(rtd->cpu_dai, 0,
+	ret = snd_soc_dai_set_sysclk(asoc_rtd_to_cpu(rtd, 0), 0,
 				     mclk_fs, SND_SOC_CLOCK_OUT);
 	if (ret < 0)
 		dev_err(rtd->dev, "failed to set cpu dai sysclk\n");
 
-	for (j = 0; j < rtd->num_codecs; j++) {
-		struct snd_soc_dai *codec_dai = rtd->codec_dais[j];
+	for_each_rtd_codec_dais(rtd, j, codec_dai) {
 
 		if (!strcmp(codec_dai->component->name, "da7219.5-001a")) {
 			ret = snd_soc_dai_set_sysclk(codec_dai,
@@ -80,10 +82,10 @@ static int mt8183_da7219_i2s_hw_params(struct snd_pcm_substream *substream,
 static int mt8183_da7219_hw_free(struct snd_pcm_substream *substream)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai;
 	int ret = 0, j;
 
-	for (j = 0; j < rtd->num_codecs; j++) {
-		struct snd_soc_dai *codec_dai = rtd->codec_dais[j];
+	for_each_rtd_codec_dais(rtd, j, codec_dai) {
 
 		if (!strcmp(codec_dai->component->name, "da7219.5-001a")) {
 			ret = snd_soc_dai_set_pll(codec_dai,
@@ -116,6 +118,46 @@ static int mt8183_i2s_hw_params_fixup(struct snd_soc_pcm_runtime *rtd,
 	return 0;
 }
 
+static int
+mt8183_da7219_max98357_bt_sco_startup(
+	struct snd_pcm_substream *substream)
+{
+	static const unsigned int rates[] = {
+		8000, 16000
+	};
+	static const struct snd_pcm_hw_constraint_list constraints_rates = {
+		.count = ARRAY_SIZE(rates),
+		.list  = rates,
+		.mask = 0,
+	};
+	static const unsigned int channels[] = {
+		1,
+	};
+	static const struct snd_pcm_hw_constraint_list constraints_channels = {
+		.count = ARRAY_SIZE(channels),
+		.list = channels,
+		.mask = 0,
+	};
+
+	struct snd_pcm_runtime *runtime = substream->runtime;
+
+	snd_pcm_hw_constraint_list(runtime, 0,
+			SNDRV_PCM_HW_PARAM_RATE, &constraints_rates);
+	runtime->hw.channels_max = 1;
+	snd_pcm_hw_constraint_list(runtime, 0,
+			SNDRV_PCM_HW_PARAM_CHANNELS,
+			&constraints_channels);
+
+	runtime->hw.formats = SNDRV_PCM_FMTBIT_S16_LE;
+	snd_pcm_hw_constraint_msbits(runtime, 0, 16, 16);
+
+	return 0;
+}
+
+static const struct snd_soc_ops mt8183_da7219_max98357_bt_sco_ops = {
+	.startup = mt8183_da7219_max98357_bt_sco_startup,
+};
+
 /* FE */
 SND_SOC_DAILINK_DEFS(playback1,
 	DAILINK_COMP_ARRAY(COMP_CPU("DL1")),
@@ -222,6 +264,7 @@ static struct snd_soc_dai_link mt8183_da7219_max98357_dai_links[] = {
 			    SND_SOC_DPCM_TRIGGER_PRE},
 		.dynamic = 1,
 		.dpcm_playback = 1,
+		.ops = &mt8183_da7219_max98357_bt_sco_ops,
 		SND_SOC_DAILINK_REG(playback2),
 	},
 	{
@@ -240,6 +283,7 @@ static struct snd_soc_dai_link mt8183_da7219_max98357_dai_links[] = {
 			    SND_SOC_DPCM_TRIGGER_PRE},
 		.dynamic = 1,
 		.dpcm_capture = 1,
+		.ops = &mt8183_da7219_max98357_bt_sco_ops,
 		SND_SOC_DAILINK_REG(capture1),
 	},
 	{
@@ -351,8 +395,12 @@ static struct snd_soc_dai_link mt8183_da7219_max98357_dai_links[] = {
 	{
 		.name = "TDM",
 		.no_pcm = 1,
+		.dai_fmt = SND_SOC_DAIFMT_I2S |
+			   SND_SOC_DAIFMT_IB_IF |
+			   SND_SOC_DAIFMT_CBM_CFM,
 		.dpcm_playback = 1,
 		.ignore_suspend = 1,
+		.be_hw_params_fixup = mt8183_i2s_hw_params_fixup,
 		SND_SOC_DAILINK_REG(tdm),
 	},
 };
@@ -372,9 +420,31 @@ static struct snd_soc_codec_conf mt6358_codec_conf[] = {
 	},
 };
 
+static const struct snd_kcontrol_new mt8183_da7219_max98357_snd_controls[] = {
+	SOC_DAPM_PIN_SWITCH("Speakers"),
+};
+
+static const
+struct snd_soc_dapm_widget mt8183_da7219_max98357_dapm_widgets[] = {
+	SND_SOC_DAPM_SPK("Speakers", NULL),
+	SND_SOC_DAPM_PINCTRL("TDM_OUT_PINCTRL",
+			     "aud_tdm_out_on", "aud_tdm_out_off"),
+};
+
+static const struct snd_soc_dapm_route mt8183_da7219_max98357_dapm_routes[] = {
+	{"Speakers", NULL, "Speaker"},
+	{"I2S Playback", NULL, "TDM_OUT_PINCTRL"},
+};
+
 static struct snd_soc_card mt8183_da7219_max98357_card = {
 	.name = "mt8183_da7219_max98357",
 	.owner = THIS_MODULE,
+	.controls = mt8183_da7219_max98357_snd_controls,
+	.num_controls = ARRAY_SIZE(mt8183_da7219_max98357_snd_controls),
+	.dapm_widgets = mt8183_da7219_max98357_dapm_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(mt8183_da7219_max98357_dapm_widgets),
+	.dapm_routes = mt8183_da7219_max98357_dapm_routes,
+	.num_dapm_routes = ARRAY_SIZE(mt8183_da7219_max98357_dapm_routes),
 	.dai_link = mt8183_da7219_max98357_dai_links,
 	.num_links = ARRAY_SIZE(mt8183_da7219_max98357_dai_links),
 	.aux_dev = &mt8183_da7219_max98357_headset_dev,
@@ -387,6 +457,8 @@ static int
 mt8183_da7219_max98357_headset_init(struct snd_soc_component *component)
 {
 	int ret;
+	struct mt8183_da7219_max98357_priv *priv =
+			snd_soc_card_get_drvdata(component->card);
 
 	/* Enable Headset and 4 Buttons Jack detection */
 	ret = snd_soc_card_jack_new(&mt8183_da7219_max98357_card,
@@ -394,12 +466,12 @@ mt8183_da7219_max98357_headset_init(struct snd_soc_component *component)
 				    SND_JACK_HEADSET |
 				    SND_JACK_BTN_0 | SND_JACK_BTN_1 |
 				    SND_JACK_BTN_2 | SND_JACK_BTN_3,
-				    &headset_jack,
+				    &priv->headset_jack,
 				    NULL, 0);
 	if (ret)
 		return ret;
 
-	da7219_aad_jack_det(component, &headset_jack);
+	da7219_aad_jack_det(component, &priv->headset_jack);
 
 	return ret;
 }
@@ -409,7 +481,8 @@ static int mt8183_da7219_max98357_dev_probe(struct platform_device *pdev)
 	struct snd_soc_card *card = &mt8183_da7219_max98357_card;
 	struct device_node *platform_node;
 	struct snd_soc_dai_link *dai_link;
-	struct pinctrl *default_pins;
+	struct mt8183_da7219_max98357_priv *priv;
+	struct pinctrl *pinctrl;
 	int ret, i;
 
 	card->dev = &pdev->dev;
@@ -436,22 +509,21 @@ static int mt8183_da7219_max98357_dev_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	ret = devm_snd_soc_register_card(&pdev->dev, card);
-	if (ret) {
-		dev_err(&pdev->dev, "%s snd_soc_register_card fail %d\n",
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	snd_soc_card_set_drvdata(card, priv);
+
+	pinctrl = devm_pinctrl_get_select(&pdev->dev, PINCTRL_STATE_DEFAULT);
+	if (IS_ERR(pinctrl)) {
+		ret = PTR_ERR(pinctrl);
+		dev_err(&pdev->dev, "%s failed to select default state %d\n",
 			__func__, ret);
 		return ret;
 	}
 
-	default_pins =
-		devm_pinctrl_get_select(&pdev->dev, PINCTRL_STATE_DEFAULT);
-	if (IS_ERR(default_pins)) {
-		dev_err(&pdev->dev, "%s set pins failed\n",
-			__func__);
-		return PTR_ERR(default_pins);
-	}
-
-	return ret;
+	return devm_snd_soc_register_card(&pdev->dev, card);
 }
 
 #ifdef CONFIG_OF
@@ -478,4 +550,3 @@ MODULE_DESCRIPTION("MT8183-DA7219-MAX98357 ALSA SoC machine driver");
 MODULE_AUTHOR("Shunli Wang <shunli.wang@mediatek.com>");
 MODULE_LICENSE("GPL v2");
 MODULE_ALIAS("mt8183_da7219_max98357 soc card");
-
diff --git a/sound/soc/mediatek/mt8183/mt8183-mt6358-ts3a227-max98357.c b/sound/soc/mediatek/mt8183/mt8183-mt6358-ts3a227-max98357.c
index 0555f7d..1fca8df 100644
--- a/sound/soc/mediatek/mt8183/mt8183-mt6358-ts3a227-max98357.c
+++ b/sound/soc/mediatek/mt8183/mt8183-mt6358-ts3a227-max98357.c
@@ -41,7 +41,7 @@ static int mt8183_mt6358_i2s_hw_params(struct snd_pcm_substream *substream,
 	unsigned int mclk_fs_ratio = 128;
 	unsigned int mclk_fs = rate * mclk_fs_ratio;
 
-	return snd_soc_dai_set_sysclk(rtd->cpu_dai,
+	return snd_soc_dai_set_sysclk(asoc_rtd_to_cpu(rtd, 0),
 				      0, mclk_fs, SND_SOC_CLOCK_OUT);
 }
 
diff --git a/sound/soc/meson/Kconfig b/sound/soc/meson/Kconfig
index 2e36761..8b62952 100644
--- a/sound/soc/meson/Kconfig
+++ b/sound/soc/meson/Kconfig
@@ -2,6 +2,16 @@
 menu "ASoC support for Amlogic platforms"
 	depends on ARCH_MESON || COMPILE_TEST
 
+config SND_MESON_AIU
+	tristate "Amlogic AIU"
+	select SND_MESON_CODEC_GLUE
+	select SND_PCM_IEC958
+	imply SND_SOC_MESON_T9015
+	imply SND_SOC_HDMI_CODEC if DRM_MESON_DW_HDMI
+	help
+	  Select Y or M to add support for the Audio output subsystem found
+	  in the Amlogic Meson8, Meson8b and GX SoC families
+
 config SND_MESON_AXG_FIFO
 	tristate
 	select REGMAP_MMIO
@@ -50,6 +60,7 @@
 config SND_MESON_AXG_SOUND_CARD
 	tristate "Amlogic AXG Sound Card Support"
 	select SND_MESON_AXG_TDM_INTERFACE
+	select SND_MESON_CARD_UTILS
 	imply SND_MESON_AXG_FRDDR
 	imply SND_MESON_AXG_TODDR
 	imply SND_MESON_AXG_TDMIN
@@ -85,11 +96,41 @@
 	  Select Y or M to add support for PDM input embedded
 	  in the Amlogic AXG SoC family
 
+config SND_MESON_CARD_UTILS
+       tristate
+
+config SND_MESON_CODEC_GLUE
+	tristate
+
+config SND_MESON_GX_SOUND_CARD
+	tristate "Amlogic GX Sound Card Support"
+	select SND_MESON_CARD_UTILS
+	imply SND_MESON_AIU
+	help
+	  Select Y or M to add support for the GXBB/GXL SoC sound card
+
+config SND_MESON_G12A_TOACODEC
+	tristate "Amlogic G12A To Internal DAC Control Support"
+	select SND_MESON_CODEC_GLUE
+	select REGMAP_MMIO
+	imply SND_SOC_MESON_T9015
+	help
+	  Select Y or M to add support for the internal audio DAC on the
+	  g12a SoC family
+
 config SND_MESON_G12A_TOHDMITX
 	tristate "Amlogic G12A To HDMI TX Control Support"
 	select REGMAP_MMIO
+	select SND_MESON_CODEC_GLUE
 	imply SND_SOC_HDMI_CODEC
 	help
 	  Select Y or M to add support for HDMI audio on the g12a SoC
 	  family
+
+config SND_SOC_MESON_T9015
+	tristate "Amlogic T9015 DAC"
+	select REGMAP_MMIO
+	help
+	  Say Y or M if you want to add support for the internal DAC found
+	  on GXL, G12 and SM1 SoC family.
 endmenu
diff --git a/sound/soc/meson/Makefile b/sound/soc/meson/Makefile
index 1a8b147..e446bc9 100644
--- a/sound/soc/meson/Makefile
+++ b/sound/soc/meson/Makefile
@@ -1,5 +1,13 @@
 # SPDX-License-Identifier: (GPL-2.0 OR MIT)
 
+snd-soc-meson-aiu-objs := aiu.o
+snd-soc-meson-aiu-objs += aiu-acodec-ctrl.o
+snd-soc-meson-aiu-objs += aiu-codec-ctrl.o
+snd-soc-meson-aiu-objs += aiu-encoder-i2s.o
+snd-soc-meson-aiu-objs += aiu-encoder-spdif.o
+snd-soc-meson-aiu-objs += aiu-fifo.o
+snd-soc-meson-aiu-objs += aiu-fifo-i2s.o
+snd-soc-meson-aiu-objs += aiu-fifo-spdif.o
 snd-soc-meson-axg-fifo-objs := axg-fifo.o
 snd-soc-meson-axg-frddr-objs := axg-frddr.o
 snd-soc-meson-axg-toddr-objs := axg-toddr.o
@@ -11,8 +19,14 @@
 snd-soc-meson-axg-spdifin-objs := axg-spdifin.o
 snd-soc-meson-axg-spdifout-objs := axg-spdifout.o
 snd-soc-meson-axg-pdm-objs := axg-pdm.o
+snd-soc-meson-card-utils-objs := meson-card-utils.o
+snd-soc-meson-codec-glue-objs := meson-codec-glue.o
+snd-soc-meson-gx-sound-card-objs := gx-card.o
+snd-soc-meson-g12a-toacodec-objs := g12a-toacodec.o
 snd-soc-meson-g12a-tohdmitx-objs := g12a-tohdmitx.o
+snd-soc-meson-t9015-objs := t9015.o
 
+obj-$(CONFIG_SND_MESON_AIU) += snd-soc-meson-aiu.o
 obj-$(CONFIG_SND_MESON_AXG_FIFO) += snd-soc-meson-axg-fifo.o
 obj-$(CONFIG_SND_MESON_AXG_FRDDR) += snd-soc-meson-axg-frddr.o
 obj-$(CONFIG_SND_MESON_AXG_TODDR) += snd-soc-meson-axg-toddr.o
@@ -24,4 +38,9 @@
 obj-$(CONFIG_SND_MESON_AXG_SPDIFIN) += snd-soc-meson-axg-spdifin.o
 obj-$(CONFIG_SND_MESON_AXG_SPDIFOUT) += snd-soc-meson-axg-spdifout.o
 obj-$(CONFIG_SND_MESON_AXG_PDM) += snd-soc-meson-axg-pdm.o
+obj-$(CONFIG_SND_MESON_CARD_UTILS) += snd-soc-meson-card-utils.o
+obj-$(CONFIG_SND_MESON_CODEC_GLUE) += snd-soc-meson-codec-glue.o
+obj-$(CONFIG_SND_MESON_GX_SOUND_CARD) += snd-soc-meson-gx-sound-card.o
+obj-$(CONFIG_SND_MESON_G12A_TOACODEC) += snd-soc-meson-g12a-toacodec.o
 obj-$(CONFIG_SND_MESON_G12A_TOHDMITX) += snd-soc-meson-g12a-tohdmitx.o
+obj-$(CONFIG_SND_SOC_MESON_T9015) += snd-soc-meson-t9015.o
diff --git a/sound/soc/meson/aiu-acodec-ctrl.c b/sound/soc/meson/aiu-acodec-ctrl.c
new file mode 100644
index 0000000..7078197
--- /dev/null
+++ b/sound/soc/meson/aiu-acodec-ctrl.c
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2020 BayLibre, SAS.
+// Author: Jerome Brunet <jbrunet@baylibre.com>
+
+#include <linux/bitfield.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dai.h>
+
+#include <dt-bindings/sound/meson-aiu.h>
+#include "aiu.h"
+#include "meson-codec-glue.h"
+
+#define CTRL_DIN_EN			15
+#define CTRL_CLK_INV			BIT(14)
+#define CTRL_LRCLK_INV			BIT(13)
+#define CTRL_I2S_IN_BCLK_SRC		BIT(11)
+#define CTRL_DIN_LRCLK_SRC_SHIFT	6
+#define CTRL_DIN_LRCLK_SRC		(0x3 << CTRL_DIN_LRCLK_SRC_SHIFT)
+#define CTRL_BCLK_MCLK_SRC		GENMASK(5, 4)
+#define CTRL_DIN_SKEW			GENMASK(3, 2)
+#define CTRL_I2S_OUT_LANE_SRC		0
+
+#define AIU_ACODEC_OUT_CHMAX		2
+
+static const char * const aiu_acodec_ctrl_mux_texts[] = {
+	"DISABLED", "I2S", "PCM",
+};
+
+static int aiu_acodec_ctrl_mux_put_enum(struct snd_kcontrol *kcontrol,
+					struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component =
+		snd_soc_dapm_kcontrol_component(kcontrol);
+	struct snd_soc_dapm_context *dapm =
+		snd_soc_dapm_kcontrol_dapm(kcontrol);
+	struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
+	unsigned int mux, changed;
+
+	mux = snd_soc_enum_item_to_val(e, ucontrol->value.enumerated.item[0]);
+	changed = snd_soc_component_test_bits(component, e->reg,
+					      CTRL_DIN_LRCLK_SRC,
+					      FIELD_PREP(CTRL_DIN_LRCLK_SRC,
+							 mux));
+
+	if (!changed)
+		return 0;
+
+	/* Force disconnect of the mux while updating */
+	snd_soc_dapm_mux_update_power(dapm, kcontrol, 0, NULL, NULL);
+
+	snd_soc_component_update_bits(component, e->reg,
+				      CTRL_DIN_LRCLK_SRC |
+				      CTRL_BCLK_MCLK_SRC,
+				      FIELD_PREP(CTRL_DIN_LRCLK_SRC, mux) |
+				      FIELD_PREP(CTRL_BCLK_MCLK_SRC, mux));
+
+	snd_soc_dapm_mux_update_power(dapm, kcontrol, mux, e, NULL);
+
+	return 0;
+}
+
+static SOC_ENUM_SINGLE_DECL(aiu_acodec_ctrl_mux_enum, AIU_ACODEC_CTRL,
+			    CTRL_DIN_LRCLK_SRC_SHIFT,
+			    aiu_acodec_ctrl_mux_texts);
+
+static const struct snd_kcontrol_new aiu_acodec_ctrl_mux =
+	SOC_DAPM_ENUM_EXT("ACodec Source", aiu_acodec_ctrl_mux_enum,
+			  snd_soc_dapm_get_enum_double,
+			  aiu_acodec_ctrl_mux_put_enum);
+
+static const struct snd_kcontrol_new aiu_acodec_ctrl_out_enable =
+	SOC_DAPM_SINGLE_AUTODISABLE("Switch", AIU_ACODEC_CTRL,
+				    CTRL_DIN_EN, 1, 0);
+
+static const struct snd_soc_dapm_widget aiu_acodec_ctrl_widgets[] = {
+	SND_SOC_DAPM_MUX("ACODEC SRC", SND_SOC_NOPM, 0, 0,
+			 &aiu_acodec_ctrl_mux),
+	SND_SOC_DAPM_SWITCH("ACODEC OUT EN", SND_SOC_NOPM, 0, 0,
+			    &aiu_acodec_ctrl_out_enable),
+};
+
+static int aiu_acodec_ctrl_input_hw_params(struct snd_pcm_substream *substream,
+					   struct snd_pcm_hw_params *params,
+					   struct snd_soc_dai *dai)
+{
+	struct meson_codec_glue_input *data;
+	int ret;
+
+	ret = meson_codec_glue_input_hw_params(substream, params, dai);
+	if (ret)
+		return ret;
+
+	/* The glue will provide 1 lane out of the 4 to the output */
+	data = meson_codec_glue_input_get_data(dai);
+	data->params.channels_min = min_t(unsigned int, AIU_ACODEC_OUT_CHMAX,
+					  data->params.channels_min);
+	data->params.channels_max = min_t(unsigned int, AIU_ACODEC_OUT_CHMAX,
+					  data->params.channels_max);
+
+	return 0;
+}
+
+static const struct snd_soc_dai_ops aiu_acodec_ctrl_input_ops = {
+	.hw_params	= aiu_acodec_ctrl_input_hw_params,
+	.set_fmt	= meson_codec_glue_input_set_fmt,
+};
+
+static const struct snd_soc_dai_ops aiu_acodec_ctrl_output_ops = {
+	.startup	= meson_codec_glue_output_startup,
+};
+
+#define AIU_ACODEC_CTRL_FORMATS					\
+	(SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |	\
+	 SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S24_LE |	\
+	 SNDRV_PCM_FMTBIT_S32_LE)
+
+#define AIU_ACODEC_STREAM(xname, xsuffix, xchmax)		\
+{								\
+	.stream_name	= xname " " xsuffix,			\
+	.channels_min	= 1,					\
+	.channels_max	= (xchmax),				\
+	.rate_min       = 5512,					\
+	.rate_max	= 192000,				\
+	.formats	= AIU_ACODEC_CTRL_FORMATS,		\
+}
+
+#define AIU_ACODEC_INPUT(xname) {				\
+	.name = "ACODEC CTRL " xname,				\
+	.playback = AIU_ACODEC_STREAM(xname, "Playback", 8),	\
+	.ops = &aiu_acodec_ctrl_input_ops,			\
+	.probe = meson_codec_glue_input_dai_probe,		\
+	.remove = meson_codec_glue_input_dai_remove,		\
+}
+
+#define AIU_ACODEC_OUTPUT(xname) {				\
+	.name = "ACODEC CTRL " xname,				\
+	.capture = AIU_ACODEC_STREAM(xname, "Capture", AIU_ACODEC_OUT_CHMAX), \
+	.ops = &aiu_acodec_ctrl_output_ops,			\
+}
+
+static struct snd_soc_dai_driver aiu_acodec_ctrl_dai_drv[] = {
+	[CTRL_I2S] = AIU_ACODEC_INPUT("ACODEC I2S IN"),
+	[CTRL_PCM] = AIU_ACODEC_INPUT("ACODEC PCM IN"),
+	[CTRL_OUT] = AIU_ACODEC_OUTPUT("ACODEC OUT"),
+};
+
+static const struct snd_soc_dapm_route aiu_acodec_ctrl_routes[] = {
+	{ "ACODEC SRC", "I2S", "ACODEC I2S IN Playback" },
+	{ "ACODEC SRC", "PCM", "ACODEC PCM IN Playback" },
+	{ "ACODEC OUT EN", "Switch", "ACODEC SRC" },
+	{ "ACODEC OUT Capture", NULL, "ACODEC OUT EN" },
+};
+
+static const struct snd_kcontrol_new aiu_acodec_ctrl_controls[] = {
+	SOC_SINGLE("ACODEC I2S Lane Select", AIU_ACODEC_CTRL,
+		   CTRL_I2S_OUT_LANE_SRC, 3, 0),
+};
+
+static int aiu_acodec_of_xlate_dai_name(struct snd_soc_component *component,
+					struct of_phandle_args *args,
+					const char **dai_name)
+{
+	return aiu_of_xlate_dai_name(component, args, dai_name, AIU_ACODEC);
+}
+
+static int aiu_acodec_ctrl_component_probe(struct snd_soc_component *component)
+{
+	/*
+	 * NOTE: Din Skew setting
+	 * According to the documentation, the following update adds one delay
+	 * to the din line. Without this, the output saturates. This happens
+	 * regardless of the link format (i2s or left_j) so it is not clear what
+	 * it actually does but it seems to be required
+	 */
+	snd_soc_component_update_bits(component, AIU_ACODEC_CTRL,
+				      CTRL_DIN_SKEW,
+				      FIELD_PREP(CTRL_DIN_SKEW, 2));
+
+	return 0;
+}
+
+static const struct snd_soc_component_driver aiu_acodec_ctrl_component = {
+	.name			= "AIU Internal DAC Codec Control",
+	.probe			= aiu_acodec_ctrl_component_probe,
+	.controls		= aiu_acodec_ctrl_controls,
+	.num_controls		= ARRAY_SIZE(aiu_acodec_ctrl_controls),
+	.dapm_widgets		= aiu_acodec_ctrl_widgets,
+	.num_dapm_widgets	= ARRAY_SIZE(aiu_acodec_ctrl_widgets),
+	.dapm_routes		= aiu_acodec_ctrl_routes,
+	.num_dapm_routes	= ARRAY_SIZE(aiu_acodec_ctrl_routes),
+	.of_xlate_dai_name	= aiu_acodec_of_xlate_dai_name,
+	.endianness		= 1,
+	.non_legacy_dai_naming	= 1,
+};
+
+int aiu_acodec_ctrl_register_component(struct device *dev)
+{
+	return snd_soc_register_component(dev, &aiu_acodec_ctrl_component,
+					  aiu_acodec_ctrl_dai_drv,
+					  ARRAY_SIZE(aiu_acodec_ctrl_dai_drv));
+}
diff --git a/sound/soc/meson/aiu-codec-ctrl.c b/sound/soc/meson/aiu-codec-ctrl.c
new file mode 100644
index 0000000..4b773d3
--- /dev/null
+++ b/sound/soc/meson/aiu-codec-ctrl.c
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2020 BayLibre, SAS.
+// Author: Jerome Brunet <jbrunet@baylibre.com>
+
+#include <linux/bitfield.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dai.h>
+
+#include <dt-bindings/sound/meson-aiu.h>
+#include "aiu.h"
+#include "meson-codec-glue.h"
+
+#define CTRL_CLK_SEL		GENMASK(1, 0)
+#define CTRL_DATA_SEL_SHIFT	4
+#define CTRL_DATA_SEL		(0x3 << CTRL_DATA_SEL_SHIFT)
+
+static const char * const aiu_codec_ctrl_mux_texts[] = {
+	"DISABLED", "PCM", "I2S",
+};
+
+static int aiu_codec_ctrl_mux_put_enum(struct snd_kcontrol *kcontrol,
+				       struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component =
+		snd_soc_dapm_kcontrol_component(kcontrol);
+	struct snd_soc_dapm_context *dapm =
+		snd_soc_dapm_kcontrol_dapm(kcontrol);
+	struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
+	unsigned int mux, changed;
+
+	mux = snd_soc_enum_item_to_val(e, ucontrol->value.enumerated.item[0]);
+	changed = snd_soc_component_test_bits(component, e->reg,
+					      CTRL_DATA_SEL,
+					      FIELD_PREP(CTRL_DATA_SEL, mux));
+
+	if (!changed)
+		return 0;
+
+	/* Force disconnect of the mux while updating */
+	snd_soc_dapm_mux_update_power(dapm, kcontrol, 0, NULL, NULL);
+
+	/* Reset the source first */
+	snd_soc_component_update_bits(component, e->reg,
+				      CTRL_CLK_SEL |
+				      CTRL_DATA_SEL,
+				      FIELD_PREP(CTRL_CLK_SEL, 0) |
+				      FIELD_PREP(CTRL_DATA_SEL, 0));
+
+	/* Set the appropriate source */
+	snd_soc_component_update_bits(component, e->reg,
+				      CTRL_CLK_SEL |
+				      CTRL_DATA_SEL,
+				      FIELD_PREP(CTRL_CLK_SEL, mux) |
+				      FIELD_PREP(CTRL_DATA_SEL, mux));
+
+	snd_soc_dapm_mux_update_power(dapm, kcontrol, mux, e, NULL);
+
+	return 0;
+}
+
+static SOC_ENUM_SINGLE_DECL(aiu_hdmi_ctrl_mux_enum, AIU_HDMI_CLK_DATA_CTRL,
+			    CTRL_DATA_SEL_SHIFT,
+			    aiu_codec_ctrl_mux_texts);
+
+static const struct snd_kcontrol_new aiu_hdmi_ctrl_mux =
+	SOC_DAPM_ENUM_EXT("HDMI Source", aiu_hdmi_ctrl_mux_enum,
+			  snd_soc_dapm_get_enum_double,
+			  aiu_codec_ctrl_mux_put_enum);
+
+static const struct snd_soc_dapm_widget aiu_hdmi_ctrl_widgets[] = {
+	SND_SOC_DAPM_MUX("HDMI CTRL SRC", SND_SOC_NOPM, 0, 0,
+			 &aiu_hdmi_ctrl_mux),
+};
+
+static const struct snd_soc_dai_ops aiu_codec_ctrl_input_ops = {
+	.hw_params	= meson_codec_glue_input_hw_params,
+	.set_fmt	= meson_codec_glue_input_set_fmt,
+};
+
+static const struct snd_soc_dai_ops aiu_codec_ctrl_output_ops = {
+	.startup	= meson_codec_glue_output_startup,
+};
+
+#define AIU_CODEC_CTRL_FORMATS					\
+	(SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |	\
+	 SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S24_LE |	\
+	 SNDRV_PCM_FMTBIT_S32_LE)
+
+#define AIU_CODEC_CTRL_STREAM(xname, xsuffix)			\
+{								\
+	.stream_name	= xname " " xsuffix,			\
+	.channels_min	= 1,					\
+	.channels_max	= 8,					\
+	.rate_min       = 5512,					\
+	.rate_max	= 192000,				\
+	.formats	= AIU_CODEC_CTRL_FORMATS,		\
+}
+
+#define AIU_CODEC_CTRL_INPUT(xname) {				\
+	.name = "CODEC CTRL " xname,				\
+	.playback = AIU_CODEC_CTRL_STREAM(xname, "Playback"),	\
+	.ops = &aiu_codec_ctrl_input_ops,			\
+	.probe = meson_codec_glue_input_dai_probe,		\
+	.remove = meson_codec_glue_input_dai_remove,		\
+}
+
+#define AIU_CODEC_CTRL_OUTPUT(xname) {				\
+	.name = "CODEC CTRL " xname,				\
+	.capture = AIU_CODEC_CTRL_STREAM(xname, "Capture"),	\
+	.ops = &aiu_codec_ctrl_output_ops,			\
+}
+
+static struct snd_soc_dai_driver aiu_hdmi_ctrl_dai_drv[] = {
+	[CTRL_I2S] = AIU_CODEC_CTRL_INPUT("HDMI I2S IN"),
+	[CTRL_PCM] = AIU_CODEC_CTRL_INPUT("HDMI PCM IN"),
+	[CTRL_OUT] = AIU_CODEC_CTRL_OUTPUT("HDMI OUT"),
+};
+
+static const struct snd_soc_dapm_route aiu_hdmi_ctrl_routes[] = {
+	{ "HDMI CTRL SRC", "I2S", "HDMI I2S IN Playback" },
+	{ "HDMI CTRL SRC", "PCM", "HDMI PCM IN Playback" },
+	{ "HDMI OUT Capture", NULL, "HDMI CTRL SRC" },
+};
+
+static int aiu_hdmi_of_xlate_dai_name(struct snd_soc_component *component,
+				      struct of_phandle_args *args,
+				      const char **dai_name)
+{
+	return aiu_of_xlate_dai_name(component, args, dai_name, AIU_HDMI);
+}
+
+static const struct snd_soc_component_driver aiu_hdmi_ctrl_component = {
+	.name			= "AIU HDMI Codec Control",
+	.dapm_widgets		= aiu_hdmi_ctrl_widgets,
+	.num_dapm_widgets	= ARRAY_SIZE(aiu_hdmi_ctrl_widgets),
+	.dapm_routes		= aiu_hdmi_ctrl_routes,
+	.num_dapm_routes	= ARRAY_SIZE(aiu_hdmi_ctrl_routes),
+	.of_xlate_dai_name	= aiu_hdmi_of_xlate_dai_name,
+	.endianness		= 1,
+	.non_legacy_dai_naming	= 1,
+};
+
+int aiu_hdmi_ctrl_register_component(struct device *dev)
+{
+	return snd_soc_register_component(dev, &aiu_hdmi_ctrl_component,
+					  aiu_hdmi_ctrl_dai_drv,
+					  ARRAY_SIZE(aiu_hdmi_ctrl_dai_drv));
+}
+
diff --git a/sound/soc/meson/aiu-encoder-i2s.c b/sound/soc/meson/aiu-encoder-i2s.c
new file mode 100644
index 0000000..832e22d2
--- /dev/null
+++ b/sound/soc/meson/aiu-encoder-i2s.c
@@ -0,0 +1,365 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2020 BayLibre, SAS.
+// Author: Jerome Brunet <jbrunet@baylibre.com>
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dai.h>
+
+#include "aiu.h"
+
+#define AIU_I2S_SOURCE_DESC_MODE_8CH	BIT(0)
+#define AIU_I2S_SOURCE_DESC_MODE_24BIT	BIT(5)
+#define AIU_I2S_SOURCE_DESC_MODE_32BIT	BIT(9)
+#define AIU_I2S_SOURCE_DESC_MODE_SPLIT	BIT(11)
+#define AIU_RST_SOFT_I2S_FAST		BIT(0)
+
+#define AIU_I2S_DAC_CFG_MSB_FIRST	BIT(2)
+#define AIU_I2S_MISC_HOLD_EN		BIT(2)
+#define AIU_CLK_CTRL_I2S_DIV_EN		BIT(0)
+#define AIU_CLK_CTRL_I2S_DIV		GENMASK(3, 2)
+#define AIU_CLK_CTRL_AOCLK_INVERT	BIT(6)
+#define AIU_CLK_CTRL_LRCLK_INVERT	BIT(7)
+#define AIU_CLK_CTRL_LRCLK_SKEW		GENMASK(9, 8)
+#define AIU_CLK_CTRL_MORE_HDMI_AMCLK	BIT(6)
+#define AIU_CLK_CTRL_MORE_I2S_DIV	GENMASK(5, 0)
+#define AIU_CODEC_DAC_LRCLK_CTRL_DIV	GENMASK(11, 0)
+
+static void aiu_encoder_i2s_divider_enable(struct snd_soc_component *component,
+					   bool enable)
+{
+	snd_soc_component_update_bits(component, AIU_CLK_CTRL,
+				      AIU_CLK_CTRL_I2S_DIV_EN,
+				      enable ? AIU_CLK_CTRL_I2S_DIV_EN : 0);
+}
+
+static void aiu_encoder_i2s_hold(struct snd_soc_component *component,
+				 bool enable)
+{
+	snd_soc_component_update_bits(component, AIU_I2S_MISC,
+				      AIU_I2S_MISC_HOLD_EN,
+				      enable ? AIU_I2S_MISC_HOLD_EN : 0);
+}
+
+static int aiu_encoder_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
+				   struct snd_soc_dai *dai)
+{
+	struct snd_soc_component *component = dai->component;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		aiu_encoder_i2s_hold(component, false);
+		return 0;
+
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		aiu_encoder_i2s_hold(component, true);
+		return 0;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int aiu_encoder_i2s_setup_desc(struct snd_soc_component *component,
+				      struct snd_pcm_hw_params *params)
+{
+	/* Always operate in split (classic interleaved) mode */
+	unsigned int desc = AIU_I2S_SOURCE_DESC_MODE_SPLIT;
+	unsigned int val;
+
+	/* Reset required to update the pipeline */
+	snd_soc_component_write(component, AIU_RST_SOFT, AIU_RST_SOFT_I2S_FAST);
+	snd_soc_component_read(component, AIU_I2S_SYNC, &val);
+
+	switch (params_physical_width(params)) {
+	case 16: /* Nothing to do */
+		break;
+
+	case 32:
+		desc |= (AIU_I2S_SOURCE_DESC_MODE_24BIT |
+			 AIU_I2S_SOURCE_DESC_MODE_32BIT);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	switch (params_channels(params)) {
+	case 2: /* Nothing to do */
+		break;
+	case 8:
+		desc |= AIU_I2S_SOURCE_DESC_MODE_8CH;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	snd_soc_component_update_bits(component, AIU_I2S_SOURCE_DESC,
+				      AIU_I2S_SOURCE_DESC_MODE_8CH |
+				      AIU_I2S_SOURCE_DESC_MODE_24BIT |
+				      AIU_I2S_SOURCE_DESC_MODE_32BIT |
+				      AIU_I2S_SOURCE_DESC_MODE_SPLIT,
+				      desc);
+
+	return 0;
+}
+
+static int aiu_encoder_i2s_set_legacy_div(struct snd_soc_component *component,
+					  struct snd_pcm_hw_params *params,
+					  unsigned int bs)
+{
+	switch (bs) {
+	case 1:
+	case 2:
+	case 4:
+	case 8:
+		/* These are the only valid legacy dividers */
+		break;
+
+	default:
+		dev_err(component->dev, "Unsupported i2s divider: %u\n", bs);
+		return -EINVAL;
+	}
+
+	snd_soc_component_update_bits(component, AIU_CLK_CTRL,
+				      AIU_CLK_CTRL_I2S_DIV,
+				      FIELD_PREP(AIU_CLK_CTRL_I2S_DIV,
+						 __ffs(bs)));
+
+	snd_soc_component_update_bits(component, AIU_CLK_CTRL_MORE,
+				      AIU_CLK_CTRL_MORE_I2S_DIV,
+				      FIELD_PREP(AIU_CLK_CTRL_MORE_I2S_DIV,
+						 0));
+
+	return 0;
+}
+
+static int aiu_encoder_i2s_set_more_div(struct snd_soc_component *component,
+					struct snd_pcm_hw_params *params,
+					unsigned int bs)
+{
+	/*
+	 * NOTE: this HW is odd.
+	 * In most configuration, the i2s divider is 'mclk / blck'.
+	 * However, in 16 bits - 8ch mode, this factor needs to be
+	 * increased by 50% to get the correct output rate.
+	 * No idea why !
+	 */
+	if (params_width(params) == 16 && params_channels(params) == 8) {
+		if (bs % 2) {
+			dev_err(component->dev,
+				"Cannot increase i2s divider by 50%%\n");
+			return -EINVAL;
+		}
+		bs += bs / 2;
+	}
+
+	/* Use CLK_MORE for mclk to bclk divider */
+	snd_soc_component_update_bits(component, AIU_CLK_CTRL,
+				      AIU_CLK_CTRL_I2S_DIV,
+				      FIELD_PREP(AIU_CLK_CTRL_I2S_DIV, 0));
+
+	snd_soc_component_update_bits(component, AIU_CLK_CTRL_MORE,
+				      AIU_CLK_CTRL_MORE_I2S_DIV,
+				      FIELD_PREP(AIU_CLK_CTRL_MORE_I2S_DIV,
+						 bs - 1));
+
+	return 0;
+}
+
+static int aiu_encoder_i2s_set_clocks(struct snd_soc_component *component,
+				      struct snd_pcm_hw_params *params)
+{
+	struct aiu *aiu = snd_soc_component_get_drvdata(component);
+	unsigned int srate = params_rate(params);
+	unsigned int fs, bs;
+	int ret;
+
+	/* Get the oversampling factor */
+	fs = DIV_ROUND_CLOSEST(clk_get_rate(aiu->i2s.clks[MCLK].clk), srate);
+
+	if (fs % 64)
+		return -EINVAL;
+
+	/* Send data MSB first */
+	snd_soc_component_update_bits(component, AIU_I2S_DAC_CFG,
+				      AIU_I2S_DAC_CFG_MSB_FIRST,
+				      AIU_I2S_DAC_CFG_MSB_FIRST);
+
+	/* Set bclk to lrlck ratio */
+	snd_soc_component_update_bits(component, AIU_CODEC_DAC_LRCLK_CTRL,
+				      AIU_CODEC_DAC_LRCLK_CTRL_DIV,
+				      FIELD_PREP(AIU_CODEC_DAC_LRCLK_CTRL_DIV,
+						 64 - 1));
+
+	bs = fs / 64;
+
+	if (aiu->platform->has_clk_ctrl_more_i2s_div)
+		ret = aiu_encoder_i2s_set_more_div(component, params, bs);
+	else
+		ret = aiu_encoder_i2s_set_legacy_div(component, params, bs);
+
+	if (ret)
+		return ret;
+
+	/* Make sure amclk is used for HDMI i2s as well */
+	snd_soc_component_update_bits(component, AIU_CLK_CTRL_MORE,
+				      AIU_CLK_CTRL_MORE_HDMI_AMCLK,
+				      AIU_CLK_CTRL_MORE_HDMI_AMCLK);
+
+	return 0;
+}
+
+static int aiu_encoder_i2s_hw_params(struct snd_pcm_substream *substream,
+				     struct snd_pcm_hw_params *params,
+				     struct snd_soc_dai *dai)
+{
+	struct snd_soc_component *component = dai->component;
+	int ret;
+
+	/* Disable the clock while changing the settings */
+	aiu_encoder_i2s_divider_enable(component, false);
+
+	ret = aiu_encoder_i2s_setup_desc(component, params);
+	if (ret) {
+		dev_err(dai->dev, "setting i2s desc failed\n");
+		return ret;
+	}
+
+	ret = aiu_encoder_i2s_set_clocks(component, params);
+	if (ret) {
+		dev_err(dai->dev, "setting i2s clocks failed\n");
+		return ret;
+	}
+
+	aiu_encoder_i2s_divider_enable(component, true);
+
+	return 0;
+}
+
+static int aiu_encoder_i2s_hw_free(struct snd_pcm_substream *substream,
+				   struct snd_soc_dai *dai)
+{
+	struct snd_soc_component *component = dai->component;
+
+	aiu_encoder_i2s_divider_enable(component, false);
+
+	return 0;
+}
+
+static int aiu_encoder_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
+{
+	struct snd_soc_component *component = dai->component;
+	unsigned int inv = fmt & SND_SOC_DAIFMT_INV_MASK;
+	unsigned int val = 0;
+	unsigned int skew;
+
+	/* Only CPU Master / Codec Slave supported ATM */
+	if ((fmt & SND_SOC_DAIFMT_MASTER_MASK) != SND_SOC_DAIFMT_CBS_CFS)
+		return -EINVAL;
+
+	if (inv == SND_SOC_DAIFMT_NB_IF ||
+	    inv == SND_SOC_DAIFMT_IB_IF)
+		val |= AIU_CLK_CTRL_LRCLK_INVERT;
+
+	if (inv == SND_SOC_DAIFMT_IB_NF ||
+	    inv == SND_SOC_DAIFMT_IB_IF)
+		val |= AIU_CLK_CTRL_AOCLK_INVERT;
+
+	/* Signal skew */
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		/* Invert sample clock for i2s */
+		val ^= AIU_CLK_CTRL_LRCLK_INVERT;
+		skew = 1;
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		skew = 0;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	val |= FIELD_PREP(AIU_CLK_CTRL_LRCLK_SKEW, skew);
+	snd_soc_component_update_bits(component, AIU_CLK_CTRL,
+				      AIU_CLK_CTRL_LRCLK_INVERT |
+				      AIU_CLK_CTRL_AOCLK_INVERT |
+				      AIU_CLK_CTRL_LRCLK_SKEW,
+				      val);
+
+	return 0;
+}
+
+static int aiu_encoder_i2s_set_sysclk(struct snd_soc_dai *dai, int clk_id,
+				      unsigned int freq, int dir)
+{
+	struct aiu *aiu = snd_soc_component_get_drvdata(dai->component);
+	int ret;
+
+	if (WARN_ON(clk_id != 0))
+		return -EINVAL;
+
+	if (dir == SND_SOC_CLOCK_IN)
+		return 0;
+
+	ret = clk_set_rate(aiu->i2s.clks[MCLK].clk, freq);
+	if (ret)
+		dev_err(dai->dev, "Failed to set sysclk to %uHz", freq);
+
+	return ret;
+}
+
+static const unsigned int hw_channels[] = {2, 8};
+static const struct snd_pcm_hw_constraint_list hw_channel_constraints = {
+	.list = hw_channels,
+	.count = ARRAY_SIZE(hw_channels),
+	.mask = 0,
+};
+
+static int aiu_encoder_i2s_startup(struct snd_pcm_substream *substream,
+				   struct snd_soc_dai *dai)
+{
+	struct aiu *aiu = snd_soc_component_get_drvdata(dai->component);
+	int ret;
+
+	/* Make sure the encoder gets either 2 or 8 channels */
+	ret = snd_pcm_hw_constraint_list(substream->runtime, 0,
+					 SNDRV_PCM_HW_PARAM_CHANNELS,
+					 &hw_channel_constraints);
+	if (ret) {
+		dev_err(dai->dev, "adding channels constraints failed\n");
+		return ret;
+	}
+
+	ret = clk_bulk_prepare_enable(aiu->i2s.clk_num, aiu->i2s.clks);
+	if (ret)
+		dev_err(dai->dev, "failed to enable i2s clocks\n");
+
+	return ret;
+}
+
+static void aiu_encoder_i2s_shutdown(struct snd_pcm_substream *substream,
+				     struct snd_soc_dai *dai)
+{
+	struct aiu *aiu = snd_soc_component_get_drvdata(dai->component);
+
+	clk_bulk_disable_unprepare(aiu->i2s.clk_num, aiu->i2s.clks);
+}
+
+const struct snd_soc_dai_ops aiu_encoder_i2s_dai_ops = {
+	.trigger	= aiu_encoder_i2s_trigger,
+	.hw_params	= aiu_encoder_i2s_hw_params,
+	.hw_free	= aiu_encoder_i2s_hw_free,
+	.set_fmt	= aiu_encoder_i2s_set_fmt,
+	.set_sysclk	= aiu_encoder_i2s_set_sysclk,
+	.startup	= aiu_encoder_i2s_startup,
+	.shutdown	= aiu_encoder_i2s_shutdown,
+};
+
diff --git a/sound/soc/meson/aiu-encoder-spdif.c b/sound/soc/meson/aiu-encoder-spdif.c
new file mode 100644
index 0000000..de85091
--- /dev/null
+++ b/sound/soc/meson/aiu-encoder-spdif.c
@@ -0,0 +1,209 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2020 BayLibre, SAS.
+// Author: Jerome Brunet <jbrunet@baylibre.com>
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <sound/pcm_params.h>
+#include <sound/pcm_iec958.h>
+#include <sound/soc.h>
+#include <sound/soc-dai.h>
+
+#include "aiu.h"
+
+#define AIU_958_MISC_NON_PCM		BIT(0)
+#define AIU_958_MISC_MODE_16BITS	BIT(1)
+#define AIU_958_MISC_16BITS_ALIGN	GENMASK(6, 5)
+#define AIU_958_MISC_MODE_32BITS	BIT(7)
+#define AIU_958_MISC_U_FROM_STREAM	BIT(12)
+#define AIU_958_MISC_FORCE_LR		BIT(13)
+#define AIU_958_CTRL_HOLD_EN		BIT(0)
+#define AIU_CLK_CTRL_958_DIV_EN		BIT(1)
+#define AIU_CLK_CTRL_958_DIV		GENMASK(5, 4)
+#define AIU_CLK_CTRL_958_DIV_MORE	BIT(12)
+
+#define AIU_CS_WORD_LEN			4
+#define AIU_958_INTERNAL_DIV		2
+
+static void
+aiu_encoder_spdif_divider_enable(struct snd_soc_component *component,
+				 bool enable)
+{
+	snd_soc_component_update_bits(component, AIU_CLK_CTRL,
+				      AIU_CLK_CTRL_958_DIV_EN,
+				      enable ? AIU_CLK_CTRL_958_DIV_EN : 0);
+}
+
+static void aiu_encoder_spdif_hold(struct snd_soc_component *component,
+				   bool enable)
+{
+	snd_soc_component_update_bits(component, AIU_958_CTRL,
+				      AIU_958_CTRL_HOLD_EN,
+				      enable ? AIU_958_CTRL_HOLD_EN : 0);
+}
+
+static int
+aiu_encoder_spdif_trigger(struct snd_pcm_substream *substream, int cmd,
+			  struct snd_soc_dai *dai)
+{
+	struct snd_soc_component *component = dai->component;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		aiu_encoder_spdif_hold(component, false);
+		return 0;
+
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		aiu_encoder_spdif_hold(component, true);
+		return 0;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int aiu_encoder_spdif_setup_cs_word(struct snd_soc_component *component,
+					   struct snd_pcm_hw_params *params)
+{
+	u8 cs[AIU_CS_WORD_LEN];
+	unsigned int val;
+	int ret;
+
+	ret = snd_pcm_create_iec958_consumer_hw_params(params, cs,
+						       AIU_CS_WORD_LEN);
+	if (ret < 0)
+		return ret;
+
+	/* Write the 1st half word */
+	val = cs[1] | cs[0] << 8;
+	snd_soc_component_write(component, AIU_958_CHSTAT_L0, val);
+	snd_soc_component_write(component, AIU_958_CHSTAT_R0, val);
+
+	/* Write the 2nd half word */
+	val = cs[3] | cs[2] << 8;
+	snd_soc_component_write(component, AIU_958_CHSTAT_L1, val);
+	snd_soc_component_write(component, AIU_958_CHSTAT_R1, val);
+
+	return 0;
+}
+
+static int aiu_encoder_spdif_hw_params(struct snd_pcm_substream *substream,
+				       struct snd_pcm_hw_params *params,
+				       struct snd_soc_dai *dai)
+{
+	struct snd_soc_component *component = dai->component;
+	struct aiu *aiu = snd_soc_component_get_drvdata(component);
+	unsigned int val = 0, mrate;
+	int ret;
+
+	/* Disable the clock while changing the settings */
+	aiu_encoder_spdif_divider_enable(component, false);
+
+	switch (params_physical_width(params)) {
+	case 16:
+		val |= AIU_958_MISC_MODE_16BITS;
+		val |= FIELD_PREP(AIU_958_MISC_16BITS_ALIGN, 2);
+		break;
+	case 32:
+		val |= AIU_958_MISC_MODE_32BITS;
+		break;
+	default:
+		dev_err(dai->dev, "Unsupport physical width\n");
+		return -EINVAL;
+	}
+
+	snd_soc_component_update_bits(component, AIU_958_MISC,
+				      AIU_958_MISC_NON_PCM |
+				      AIU_958_MISC_MODE_16BITS |
+				      AIU_958_MISC_16BITS_ALIGN |
+				      AIU_958_MISC_MODE_32BITS |
+				      AIU_958_MISC_FORCE_LR |
+				      AIU_958_MISC_U_FROM_STREAM,
+				      val);
+
+	/* Set the stream channel status word */
+	ret = aiu_encoder_spdif_setup_cs_word(component, params);
+	if (ret) {
+		dev_err(dai->dev, "failed to set channel status word\n");
+		return ret;
+	}
+
+	snd_soc_component_update_bits(component, AIU_CLK_CTRL,
+				      AIU_CLK_CTRL_958_DIV |
+				      AIU_CLK_CTRL_958_DIV_MORE,
+				      FIELD_PREP(AIU_CLK_CTRL_958_DIV,
+						 __ffs(AIU_958_INTERNAL_DIV)));
+
+	/* 2 * 32bits per subframe * 2 channels = 128 */
+	mrate = params_rate(params) * 128 * AIU_958_INTERNAL_DIV;
+	ret = clk_set_rate(aiu->spdif.clks[MCLK].clk, mrate);
+	if (ret) {
+		dev_err(dai->dev, "failed to set mclk rate\n");
+		return ret;
+	}
+
+	aiu_encoder_spdif_divider_enable(component, true);
+
+	return 0;
+}
+
+static int aiu_encoder_spdif_hw_free(struct snd_pcm_substream *substream,
+				     struct snd_soc_dai *dai)
+{
+	struct snd_soc_component *component = dai->component;
+
+	aiu_encoder_spdif_divider_enable(component, false);
+
+	return 0;
+}
+
+static int aiu_encoder_spdif_startup(struct snd_pcm_substream *substream,
+				     struct snd_soc_dai *dai)
+{
+	struct aiu *aiu = snd_soc_component_get_drvdata(dai->component);
+	int ret;
+
+	/*
+	 * NOTE: Make sure the spdif block is on its own divider.
+	 *
+	 * The spdif can be clocked by the i2s master clock or its own
+	 * clock. We should (in theory) change the source depending on the
+	 * origin of the data.
+	 *
+	 * However, considering the clocking scheme used on these platforms,
+	 * the master clocks will pick the same PLL source when they are
+	 * playing from the same FIFO. The clock should be in sync so, it
+	 * should not be necessary to reparent the spdif master clock.
+	 */
+	ret = clk_set_parent(aiu->spdif.clks[MCLK].clk,
+			     aiu->spdif_mclk);
+	if (ret)
+		return ret;
+
+	ret = clk_bulk_prepare_enable(aiu->spdif.clk_num, aiu->spdif.clks);
+	if (ret)
+		dev_err(dai->dev, "failed to enable spdif clocks\n");
+
+	return ret;
+}
+
+static void aiu_encoder_spdif_shutdown(struct snd_pcm_substream *substream,
+				       struct snd_soc_dai *dai)
+{
+	struct aiu *aiu = snd_soc_component_get_drvdata(dai->component);
+
+	clk_bulk_disable_unprepare(aiu->spdif.clk_num, aiu->spdif.clks);
+}
+
+const struct snd_soc_dai_ops aiu_encoder_spdif_dai_ops = {
+	.trigger	= aiu_encoder_spdif_trigger,
+	.hw_params	= aiu_encoder_spdif_hw_params,
+	.hw_free	= aiu_encoder_spdif_hw_free,
+	.startup	= aiu_encoder_spdif_startup,
+	.shutdown	= aiu_encoder_spdif_shutdown,
+};
diff --git a/sound/soc/meson/aiu-fifo-i2s.c b/sound/soc/meson/aiu-fifo-i2s.c
new file mode 100644
index 0000000..9a5271c
--- /dev/null
+++ b/sound/soc/meson/aiu-fifo-i2s.c
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2020 BayLibre, SAS.
+// Author: Jerome Brunet <jbrunet@baylibre.com>
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dai.h>
+
+#include "aiu.h"
+#include "aiu-fifo.h"
+
+#define AIU_I2S_SOURCE_DESC_MODE_8CH	BIT(0)
+#define AIU_I2S_SOURCE_DESC_MODE_24BIT	BIT(5)
+#define AIU_I2S_SOURCE_DESC_MODE_32BIT	BIT(9)
+#define AIU_I2S_SOURCE_DESC_MODE_SPLIT	BIT(11)
+#define AIU_MEM_I2S_MASKS_IRQ_BLOCK	GENMASK(31, 16)
+#define AIU_MEM_I2S_CONTROL_MODE_16BIT	BIT(6)
+#define AIU_MEM_I2S_BUF_CNTL_INIT	BIT(0)
+#define AIU_RST_SOFT_I2S_FAST		BIT(0)
+
+#define AIU_FIFO_I2S_BLOCK		256
+
+static struct snd_pcm_hardware fifo_i2s_pcm = {
+	.info = (SNDRV_PCM_INFO_INTERLEAVED |
+		 SNDRV_PCM_INFO_MMAP |
+		 SNDRV_PCM_INFO_MMAP_VALID |
+		 SNDRV_PCM_INFO_PAUSE),
+	.formats = AIU_FORMATS,
+	.rate_min = 5512,
+	.rate_max = 192000,
+	.channels_min = 2,
+	.channels_max = 8,
+	.period_bytes_min = AIU_FIFO_I2S_BLOCK,
+	.period_bytes_max = AIU_FIFO_I2S_BLOCK * USHRT_MAX,
+	.periods_min = 2,
+	.periods_max = UINT_MAX,
+
+	/* No real justification for this */
+	.buffer_bytes_max = 1 * 1024 * 1024,
+};
+
+static int aiu_fifo_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
+				struct snd_soc_dai *dai)
+{
+	struct snd_soc_component *component = dai->component;
+	unsigned int val;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		snd_soc_component_write(component, AIU_RST_SOFT,
+					AIU_RST_SOFT_I2S_FAST);
+		snd_soc_component_read(component, AIU_I2S_SYNC, &val);
+		break;
+	}
+
+	return aiu_fifo_trigger(substream, cmd, dai);
+}
+
+static int aiu_fifo_i2s_prepare(struct snd_pcm_substream *substream,
+				struct snd_soc_dai *dai)
+{
+	struct snd_soc_component *component = dai->component;
+	int ret;
+
+	ret = aiu_fifo_prepare(substream, dai);
+	if (ret)
+		return ret;
+
+	snd_soc_component_update_bits(component,
+				      AIU_MEM_I2S_BUF_CNTL,
+				      AIU_MEM_I2S_BUF_CNTL_INIT,
+				      AIU_MEM_I2S_BUF_CNTL_INIT);
+	snd_soc_component_update_bits(component,
+				      AIU_MEM_I2S_BUF_CNTL,
+				      AIU_MEM_I2S_BUF_CNTL_INIT, 0);
+
+	return 0;
+}
+
+static int aiu_fifo_i2s_hw_params(struct snd_pcm_substream *substream,
+				  struct snd_pcm_hw_params *params,
+				  struct snd_soc_dai *dai)
+{
+	struct snd_soc_component *component = dai->component;
+	struct aiu_fifo *fifo = dai->playback_dma_data;
+	unsigned int val;
+	int ret;
+
+	ret = aiu_fifo_hw_params(substream, params, dai);
+	if (ret)
+		return ret;
+
+	switch (params_physical_width(params)) {
+	case 16:
+		val = AIU_MEM_I2S_CONTROL_MODE_16BIT;
+		break;
+	case 32:
+		val = 0;
+		break;
+	default:
+		dev_err(dai->dev, "Unsupported physical width %u\n",
+			params_physical_width(params));
+		return -EINVAL;
+	}
+
+	snd_soc_component_update_bits(component, AIU_MEM_I2S_CONTROL,
+				      AIU_MEM_I2S_CONTROL_MODE_16BIT,
+				      val);
+
+	/* Setup the irq periodicity */
+	val = params_period_bytes(params) / fifo->fifo_block;
+	val = FIELD_PREP(AIU_MEM_I2S_MASKS_IRQ_BLOCK, val);
+	snd_soc_component_update_bits(component, AIU_MEM_I2S_MASKS,
+				      AIU_MEM_I2S_MASKS_IRQ_BLOCK, val);
+
+	return 0;
+}
+
+const struct snd_soc_dai_ops aiu_fifo_i2s_dai_ops = {
+	.trigger	= aiu_fifo_i2s_trigger,
+	.prepare	= aiu_fifo_i2s_prepare,
+	.hw_params	= aiu_fifo_i2s_hw_params,
+	.hw_free	= aiu_fifo_hw_free,
+	.startup	= aiu_fifo_startup,
+	.shutdown	= aiu_fifo_shutdown,
+};
+
+int aiu_fifo_i2s_dai_probe(struct snd_soc_dai *dai)
+{
+	struct snd_soc_component *component = dai->component;
+	struct aiu *aiu = snd_soc_component_get_drvdata(component);
+	struct aiu_fifo *fifo;
+	int ret;
+
+	ret = aiu_fifo_dai_probe(dai);
+	if (ret)
+		return ret;
+
+	fifo = dai->playback_dma_data;
+
+	fifo->pcm = &fifo_i2s_pcm;
+	fifo->mem_offset = AIU_MEM_I2S_START;
+	fifo->fifo_block = AIU_FIFO_I2S_BLOCK;
+	fifo->pclk = aiu->i2s.clks[PCLK].clk;
+	fifo->irq = aiu->i2s.irq;
+
+	return 0;
+}
diff --git a/sound/soc/meson/aiu-fifo-spdif.c b/sound/soc/meson/aiu-fifo-spdif.c
new file mode 100644
index 0000000..44eb6fa
--- /dev/null
+++ b/sound/soc/meson/aiu-fifo-spdif.c
@@ -0,0 +1,186 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2020 BayLibre, SAS.
+// Author: Jerome Brunet <jbrunet@baylibre.com>
+
+#include <linux/clk.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dai.h>
+
+#include "aiu.h"
+#include "aiu-fifo.h"
+
+#define AIU_IEC958_DCU_FF_CTRL_EN		BIT(0)
+#define AIU_IEC958_DCU_FF_CTRL_AUTO_DISABLE	BIT(1)
+#define AIU_IEC958_DCU_FF_CTRL_IRQ_MODE		GENMASK(3, 2)
+#define AIU_IEC958_DCU_FF_CTRL_IRQ_OUT_THD	BIT(2)
+#define AIU_IEC958_DCU_FF_CTRL_IRQ_FRAME_READ	BIT(3)
+#define AIU_IEC958_DCU_FF_CTRL_SYNC_HEAD_EN	BIT(4)
+#define AIU_IEC958_DCU_FF_CTRL_BYTE_SEEK	BIT(5)
+#define AIU_IEC958_DCU_FF_CTRL_CONTINUE		BIT(6)
+#define AIU_MEM_IEC958_CONTROL_ENDIAN		GENMASK(5, 3)
+#define AIU_MEM_IEC958_CONTROL_RD_DDR		BIT(6)
+#define AIU_MEM_IEC958_CONTROL_MODE_16BIT	BIT(7)
+#define AIU_MEM_IEC958_CONTROL_MODE_LINEAR	BIT(8)
+#define AIU_MEM_IEC958_BUF_CNTL_INIT		BIT(0)
+
+#define AIU_FIFO_SPDIF_BLOCK			8
+
+static struct snd_pcm_hardware fifo_spdif_pcm = {
+	.info = (SNDRV_PCM_INFO_INTERLEAVED |
+		 SNDRV_PCM_INFO_MMAP |
+		 SNDRV_PCM_INFO_MMAP_VALID |
+		 SNDRV_PCM_INFO_PAUSE),
+	.formats = AIU_FORMATS,
+	.rate_min = 5512,
+	.rate_max = 192000,
+	.channels_min = 2,
+	.channels_max = 2,
+	.period_bytes_min = AIU_FIFO_SPDIF_BLOCK,
+	.period_bytes_max = AIU_FIFO_SPDIF_BLOCK * USHRT_MAX,
+	.periods_min = 2,
+	.periods_max = UINT_MAX,
+
+	/* No real justification for this */
+	.buffer_bytes_max = 1 * 1024 * 1024,
+};
+
+static void fifo_spdif_dcu_enable(struct snd_soc_component *component,
+				  bool enable)
+{
+	snd_soc_component_update_bits(component, AIU_IEC958_DCU_FF_CTRL,
+				      AIU_IEC958_DCU_FF_CTRL_EN,
+				      enable ? AIU_IEC958_DCU_FF_CTRL_EN : 0);
+}
+
+static int fifo_spdif_trigger(struct snd_pcm_substream *substream, int cmd,
+			      struct snd_soc_dai *dai)
+{
+	struct snd_soc_component *component = dai->component;
+	int ret;
+
+	ret = aiu_fifo_trigger(substream, cmd, dai);
+	if (ret)
+		return ret;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		fifo_spdif_dcu_enable(component, true);
+		break;
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+	case SNDRV_PCM_TRIGGER_STOP:
+		fifo_spdif_dcu_enable(component, false);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int fifo_spdif_prepare(struct snd_pcm_substream *substream,
+			      struct snd_soc_dai *dai)
+{
+	struct snd_soc_component *component = dai->component;
+	int ret;
+
+	ret = aiu_fifo_prepare(substream, dai);
+	if (ret)
+		return ret;
+
+	snd_soc_component_update_bits(component,
+				      AIU_MEM_IEC958_BUF_CNTL,
+				      AIU_MEM_IEC958_BUF_CNTL_INIT,
+				      AIU_MEM_IEC958_BUF_CNTL_INIT);
+	snd_soc_component_update_bits(component,
+				      AIU_MEM_IEC958_BUF_CNTL,
+				      AIU_MEM_IEC958_BUF_CNTL_INIT, 0);
+
+	return 0;
+}
+
+static int fifo_spdif_hw_params(struct snd_pcm_substream *substream,
+				struct snd_pcm_hw_params *params,
+				struct snd_soc_dai *dai)
+{
+	struct snd_soc_component *component = dai->component;
+	unsigned int val;
+	int ret;
+
+	ret = aiu_fifo_hw_params(substream, params, dai);
+	if (ret)
+		return ret;
+
+	val = AIU_MEM_IEC958_CONTROL_RD_DDR |
+	      AIU_MEM_IEC958_CONTROL_MODE_LINEAR;
+
+	switch (params_physical_width(params)) {
+	case 16:
+		val |= AIU_MEM_IEC958_CONTROL_MODE_16BIT;
+		break;
+	case 32:
+		break;
+	default:
+		dev_err(dai->dev, "Unsupported physical width %u\n",
+			params_physical_width(params));
+		return -EINVAL;
+	}
+
+	snd_soc_component_update_bits(component, AIU_MEM_IEC958_CONTROL,
+				      AIU_MEM_IEC958_CONTROL_ENDIAN |
+				      AIU_MEM_IEC958_CONTROL_RD_DDR |
+				      AIU_MEM_IEC958_CONTROL_MODE_LINEAR |
+				      AIU_MEM_IEC958_CONTROL_MODE_16BIT,
+				      val);
+
+	/* Number bytes read by the FIFO between each IRQ */
+	snd_soc_component_write(component, AIU_IEC958_BPF,
+				params_period_bytes(params));
+
+	/*
+	 * AUTO_DISABLE and SYNC_HEAD are enabled by default but
+	 * this should be disabled in PCM (uncompressed) mode
+	 */
+	snd_soc_component_update_bits(component, AIU_IEC958_DCU_FF_CTRL,
+				      AIU_IEC958_DCU_FF_CTRL_AUTO_DISABLE |
+				      AIU_IEC958_DCU_FF_CTRL_IRQ_MODE |
+				      AIU_IEC958_DCU_FF_CTRL_SYNC_HEAD_EN,
+				      AIU_IEC958_DCU_FF_CTRL_IRQ_FRAME_READ);
+
+	return 0;
+}
+
+const struct snd_soc_dai_ops aiu_fifo_spdif_dai_ops = {
+	.trigger	= fifo_spdif_trigger,
+	.prepare	= fifo_spdif_prepare,
+	.hw_params	= fifo_spdif_hw_params,
+	.hw_free	= aiu_fifo_hw_free,
+	.startup	= aiu_fifo_startup,
+	.shutdown	= aiu_fifo_shutdown,
+};
+
+int aiu_fifo_spdif_dai_probe(struct snd_soc_dai *dai)
+{
+	struct snd_soc_component *component = dai->component;
+	struct aiu *aiu = snd_soc_component_get_drvdata(component);
+	struct aiu_fifo *fifo;
+	int ret;
+
+	ret = aiu_fifo_dai_probe(dai);
+	if (ret)
+		return ret;
+
+	fifo = dai->playback_dma_data;
+
+	fifo->pcm = &fifo_spdif_pcm;
+	fifo->mem_offset = AIU_MEM_IEC958_START;
+	fifo->fifo_block = 1;
+	fifo->pclk = aiu->spdif.clks[PCLK].clk;
+	fifo->irq = aiu->spdif.irq;
+
+	return 0;
+}
diff --git a/sound/soc/meson/aiu-fifo.c b/sound/soc/meson/aiu-fifo.c
new file mode 100644
index 0000000..d9cede4
--- /dev/null
+++ b/sound/soc/meson/aiu-fifo.c
@@ -0,0 +1,223 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2020 BayLibre, SAS.
+// Author: Jerome Brunet <jbrunet@baylibre.com>
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dai.h>
+
+#include "aiu-fifo.h"
+
+#define AIU_MEM_START	0x00
+#define AIU_MEM_RD	0x04
+#define AIU_MEM_END	0x08
+#define AIU_MEM_MASKS	0x0c
+#define  AIU_MEM_MASK_CH_RD GENMASK(7, 0)
+#define  AIU_MEM_MASK_CH_MEM GENMASK(15, 8)
+#define AIU_MEM_CONTROL	0x10
+#define  AIU_MEM_CONTROL_INIT BIT(0)
+#define  AIU_MEM_CONTROL_FILL_EN BIT(1)
+#define  AIU_MEM_CONTROL_EMPTY_EN BIT(2)
+
+static struct snd_soc_dai *aiu_fifo_dai(struct snd_pcm_substream *ss)
+{
+	struct snd_soc_pcm_runtime *rtd = ss->private_data;
+
+	return asoc_rtd_to_cpu(rtd, 0);
+}
+
+snd_pcm_uframes_t aiu_fifo_pointer(struct snd_soc_component *component,
+				   struct snd_pcm_substream *substream)
+{
+	struct snd_soc_dai *dai = aiu_fifo_dai(substream);
+	struct aiu_fifo *fifo = dai->playback_dma_data;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	unsigned int addr;
+
+	snd_soc_component_read(component, fifo->mem_offset + AIU_MEM_RD,
+			       &addr);
+
+	return bytes_to_frames(runtime, addr - (unsigned int)runtime->dma_addr);
+}
+
+static void aiu_fifo_enable(struct snd_soc_dai *dai, bool enable)
+{
+	struct snd_soc_component *component = dai->component;
+	struct aiu_fifo *fifo = dai->playback_dma_data;
+	unsigned int en_mask = (AIU_MEM_CONTROL_FILL_EN |
+				AIU_MEM_CONTROL_EMPTY_EN);
+
+	snd_soc_component_update_bits(component,
+				      fifo->mem_offset + AIU_MEM_CONTROL,
+				      en_mask, enable ? en_mask : 0);
+}
+
+int aiu_fifo_trigger(struct snd_pcm_substream *substream, int cmd,
+		     struct snd_soc_dai *dai)
+{
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		aiu_fifo_enable(dai, true);
+		break;
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+	case SNDRV_PCM_TRIGGER_STOP:
+		aiu_fifo_enable(dai, false);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+int aiu_fifo_prepare(struct snd_pcm_substream *substream,
+		     struct snd_soc_dai *dai)
+{
+	struct snd_soc_component *component = dai->component;
+	struct aiu_fifo *fifo = dai->playback_dma_data;
+
+	snd_soc_component_update_bits(component,
+				      fifo->mem_offset + AIU_MEM_CONTROL,
+				      AIU_MEM_CONTROL_INIT,
+				      AIU_MEM_CONTROL_INIT);
+	snd_soc_component_update_bits(component,
+				      fifo->mem_offset + AIU_MEM_CONTROL,
+				      AIU_MEM_CONTROL_INIT, 0);
+	return 0;
+}
+
+int aiu_fifo_hw_params(struct snd_pcm_substream *substream,
+		       struct snd_pcm_hw_params *params,
+		       struct snd_soc_dai *dai)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct snd_soc_component *component = dai->component;
+	struct aiu_fifo *fifo = dai->playback_dma_data;
+	dma_addr_t end;
+	int ret;
+
+	ret = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params));
+	if (ret < 0)
+		return ret;
+
+	/* Setup the fifo boundaries */
+	end = runtime->dma_addr + runtime->dma_bytes - fifo->fifo_block;
+	snd_soc_component_write(component, fifo->mem_offset + AIU_MEM_START,
+				runtime->dma_addr);
+	snd_soc_component_write(component, fifo->mem_offset + AIU_MEM_RD,
+				runtime->dma_addr);
+	snd_soc_component_write(component, fifo->mem_offset + AIU_MEM_END,
+				end);
+
+	/* Setup the fifo to read all the memory - no skip */
+	snd_soc_component_update_bits(component,
+				      fifo->mem_offset + AIU_MEM_MASKS,
+				      AIU_MEM_MASK_CH_RD | AIU_MEM_MASK_CH_MEM,
+				      FIELD_PREP(AIU_MEM_MASK_CH_RD, 0xff) |
+				      FIELD_PREP(AIU_MEM_MASK_CH_MEM, 0xff));
+
+	return 0;
+}
+
+int aiu_fifo_hw_free(struct snd_pcm_substream *substream,
+		     struct snd_soc_dai *dai)
+{
+	return snd_pcm_lib_free_pages(substream);
+}
+
+static irqreturn_t aiu_fifo_isr(int irq, void *dev_id)
+{
+	struct snd_pcm_substream *playback = dev_id;
+
+	snd_pcm_period_elapsed(playback);
+
+	return IRQ_HANDLED;
+}
+
+int aiu_fifo_startup(struct snd_pcm_substream *substream,
+		     struct snd_soc_dai *dai)
+{
+	struct aiu_fifo *fifo = dai->playback_dma_data;
+	int ret;
+
+	snd_soc_set_runtime_hwparams(substream, fifo->pcm);
+
+	/*
+	 * Make sure the buffer and period size are multiple of the fifo burst
+	 * size
+	 */
+	ret = snd_pcm_hw_constraint_step(substream->runtime, 0,
+					 SNDRV_PCM_HW_PARAM_BUFFER_BYTES,
+					 fifo->fifo_block);
+	if (ret)
+		return ret;
+
+	ret = snd_pcm_hw_constraint_step(substream->runtime, 0,
+					 SNDRV_PCM_HW_PARAM_PERIOD_BYTES,
+					 fifo->fifo_block);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(fifo->pclk);
+	if (ret)
+		return ret;
+
+	ret = request_irq(fifo->irq, aiu_fifo_isr, 0, dev_name(dai->dev),
+			  substream);
+	if (ret)
+		clk_disable_unprepare(fifo->pclk);
+
+	return ret;
+}
+
+void aiu_fifo_shutdown(struct snd_pcm_substream *substream,
+		       struct snd_soc_dai *dai)
+{
+	struct aiu_fifo *fifo = dai->playback_dma_data;
+
+	free_irq(fifo->irq, substream);
+	clk_disable_unprepare(fifo->pclk);
+}
+
+int aiu_fifo_pcm_new(struct snd_soc_pcm_runtime *rtd,
+		     struct snd_soc_dai *dai)
+{
+	struct snd_pcm_substream *substream =
+		rtd->pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream;
+	struct snd_card *card = rtd->card->snd_card;
+	struct aiu_fifo *fifo = dai->playback_dma_data;
+	size_t size = fifo->pcm->buffer_bytes_max;
+
+	snd_pcm_lib_preallocate_pages(substream,
+				      SNDRV_DMA_TYPE_DEV,
+				      card->dev, size, size);
+
+	return 0;
+}
+
+int aiu_fifo_dai_probe(struct snd_soc_dai *dai)
+{
+	struct aiu_fifo *fifo;
+
+	fifo = kzalloc(sizeof(*fifo), GFP_KERNEL);
+	if (!fifo)
+		return -ENOMEM;
+
+	dai->playback_dma_data = fifo;
+
+	return 0;
+}
+
+int aiu_fifo_dai_remove(struct snd_soc_dai *dai)
+{
+	kfree(dai->playback_dma_data);
+
+	return 0;
+}
+
diff --git a/sound/soc/meson/aiu-fifo.h b/sound/soc/meson/aiu-fifo.h
new file mode 100644
index 0000000..42ce266
--- /dev/null
+++ b/sound/soc/meson/aiu-fifo.h
@@ -0,0 +1,50 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/*
+ * Copyright (c) 2020 BayLibre, SAS.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+#ifndef _MESON_AIU_FIFO_H
+#define _MESON_AIU_FIFO_H
+
+struct snd_pcm_hardware;
+struct snd_soc_component_driver;
+struct snd_soc_dai_driver;
+struct clk;
+struct snd_pcm_ops;
+struct snd_pcm_substream;
+struct snd_soc_dai;
+struct snd_pcm_hw_params;
+struct platform_device;
+
+struct aiu_fifo {
+	struct snd_pcm_hardware *pcm;
+	unsigned int mem_offset;
+	unsigned int fifo_block;
+	struct clk *pclk;
+	int irq;
+};
+
+int aiu_fifo_dai_probe(struct snd_soc_dai *dai);
+int aiu_fifo_dai_remove(struct snd_soc_dai *dai);
+
+snd_pcm_uframes_t aiu_fifo_pointer(struct snd_soc_component *component,
+				   struct snd_pcm_substream *substream);
+
+int aiu_fifo_trigger(struct snd_pcm_substream *substream, int cmd,
+		     struct snd_soc_dai *dai);
+int aiu_fifo_prepare(struct snd_pcm_substream *substream,
+		     struct snd_soc_dai *dai);
+int aiu_fifo_hw_params(struct snd_pcm_substream *substream,
+		       struct snd_pcm_hw_params *params,
+		       struct snd_soc_dai *dai);
+int aiu_fifo_hw_free(struct snd_pcm_substream *substream,
+		     struct snd_soc_dai *dai);
+int aiu_fifo_startup(struct snd_pcm_substream *substream,
+		     struct snd_soc_dai *dai);
+void aiu_fifo_shutdown(struct snd_pcm_substream *substream,
+		       struct snd_soc_dai *dai);
+int aiu_fifo_pcm_new(struct snd_soc_pcm_runtime *rtd,
+		     struct snd_soc_dai *dai);
+
+#endif /* _MESON_AIU_FIFO_H */
diff --git a/sound/soc/meson/aiu.c b/sound/soc/meson/aiu.c
new file mode 100644
index 0000000..dc35ca7
--- /dev/null
+++ b/sound/soc/meson/aiu.c
@@ -0,0 +1,388 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2020 BayLibre, SAS.
+// Author: Jerome Brunet <jbrunet@baylibre.com>
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <sound/soc.h>
+#include <sound/soc-dai.h>
+
+#include <dt-bindings/sound/meson-aiu.h>
+#include "aiu.h"
+#include "aiu-fifo.h"
+
+#define AIU_I2S_MISC_958_SRC_SHIFT 3
+
+static const char * const aiu_spdif_encode_sel_texts[] = {
+	"SPDIF", "I2S",
+};
+
+static SOC_ENUM_SINGLE_DECL(aiu_spdif_encode_sel_enum, AIU_I2S_MISC,
+			    AIU_I2S_MISC_958_SRC_SHIFT,
+			    aiu_spdif_encode_sel_texts);
+
+static const struct snd_kcontrol_new aiu_spdif_encode_mux =
+	SOC_DAPM_ENUM("SPDIF Buffer Src", aiu_spdif_encode_sel_enum);
+
+static const struct snd_soc_dapm_widget aiu_cpu_dapm_widgets[] = {
+	SND_SOC_DAPM_MUX("SPDIF SRC SEL", SND_SOC_NOPM, 0, 0,
+			 &aiu_spdif_encode_mux),
+};
+
+static const struct snd_soc_dapm_route aiu_cpu_dapm_routes[] = {
+	{ "I2S Encoder Playback", NULL, "I2S FIFO Playback" },
+	{ "SPDIF SRC SEL", "SPDIF", "SPDIF FIFO Playback" },
+	{ "SPDIF SRC SEL", "I2S", "I2S FIFO Playback" },
+	{ "SPDIF Encoder Playback", NULL, "SPDIF SRC SEL" },
+};
+
+int aiu_of_xlate_dai_name(struct snd_soc_component *component,
+			  struct of_phandle_args *args,
+			  const char **dai_name,
+			  unsigned int component_id)
+{
+	struct snd_soc_dai *dai;
+	int id;
+
+	if (args->args_count != 2)
+		return -EINVAL;
+
+	if (args->args[0] != component_id)
+		return -EINVAL;
+
+	id = args->args[1];
+
+	if (id < 0 || id >= component->num_dai)
+		return -EINVAL;
+
+	for_each_component_dais(component, dai) {
+		if (id == 0)
+			break;
+		id--;
+	}
+
+	*dai_name = dai->driver->name;
+
+	return 0;
+}
+
+static int aiu_cpu_of_xlate_dai_name(struct snd_soc_component *component,
+				     struct of_phandle_args *args,
+				     const char **dai_name)
+{
+	return aiu_of_xlate_dai_name(component, args, dai_name, AIU_CPU);
+}
+
+static int aiu_cpu_component_probe(struct snd_soc_component *component)
+{
+	struct aiu *aiu = snd_soc_component_get_drvdata(component);
+
+	/* Required for the SPDIF Source control operation */
+	return clk_prepare_enable(aiu->i2s.clks[PCLK].clk);
+}
+
+static void aiu_cpu_component_remove(struct snd_soc_component *component)
+{
+	struct aiu *aiu = snd_soc_component_get_drvdata(component);
+
+	clk_disable_unprepare(aiu->i2s.clks[PCLK].clk);
+}
+
+static const struct snd_soc_component_driver aiu_cpu_component = {
+	.name			= "AIU CPU",
+	.dapm_widgets		= aiu_cpu_dapm_widgets,
+	.num_dapm_widgets	= ARRAY_SIZE(aiu_cpu_dapm_widgets),
+	.dapm_routes		= aiu_cpu_dapm_routes,
+	.num_dapm_routes	= ARRAY_SIZE(aiu_cpu_dapm_routes),
+	.of_xlate_dai_name	= aiu_cpu_of_xlate_dai_name,
+	.pointer		= aiu_fifo_pointer,
+	.probe			= aiu_cpu_component_probe,
+	.remove			= aiu_cpu_component_remove,
+};
+
+static struct snd_soc_dai_driver aiu_cpu_dai_drv[] = {
+	[CPU_I2S_FIFO] = {
+		.name = "I2S FIFO",
+		.playback = {
+			.stream_name	= "I2S FIFO Playback",
+			.channels_min	= 2,
+			.channels_max	= 8,
+			.rates		= SNDRV_PCM_RATE_CONTINUOUS,
+			.rate_min	= 5512,
+			.rate_max	= 192000,
+			.formats	= AIU_FORMATS,
+		},
+		.ops		= &aiu_fifo_i2s_dai_ops,
+		.pcm_new	= aiu_fifo_pcm_new,
+		.probe		= aiu_fifo_i2s_dai_probe,
+		.remove		= aiu_fifo_dai_remove,
+	},
+	[CPU_SPDIF_FIFO] = {
+		.name = "SPDIF FIFO",
+		.playback = {
+			.stream_name	= "SPDIF FIFO Playback",
+			.channels_min	= 2,
+			.channels_max	= 2,
+			.rates		= SNDRV_PCM_RATE_CONTINUOUS,
+			.rate_min	= 5512,
+			.rate_max	= 192000,
+			.formats	= AIU_FORMATS,
+		},
+		.ops		= &aiu_fifo_spdif_dai_ops,
+		.pcm_new	= aiu_fifo_pcm_new,
+		.probe		= aiu_fifo_spdif_dai_probe,
+		.remove		= aiu_fifo_dai_remove,
+	},
+	[CPU_I2S_ENCODER] = {
+		.name = "I2S Encoder",
+		.playback = {
+			.stream_name = "I2S Encoder Playback",
+			.channels_min = 2,
+			.channels_max = 8,
+			.rates = SNDRV_PCM_RATE_8000_192000,
+			.formats = AIU_FORMATS,
+		},
+		.ops = &aiu_encoder_i2s_dai_ops,
+	},
+	[CPU_SPDIF_ENCODER] = {
+		.name = "SPDIF Encoder",
+		.playback = {
+			.stream_name = "SPDIF Encoder Playback",
+			.channels_min = 2,
+			.channels_max = 2,
+			.rates = (SNDRV_PCM_RATE_32000  |
+				  SNDRV_PCM_RATE_44100  |
+				  SNDRV_PCM_RATE_48000  |
+				  SNDRV_PCM_RATE_88200  |
+				  SNDRV_PCM_RATE_96000  |
+				  SNDRV_PCM_RATE_176400 |
+				  SNDRV_PCM_RATE_192000),
+			.formats = AIU_FORMATS,
+		},
+		.ops = &aiu_encoder_spdif_dai_ops,
+	}
+};
+
+static const struct regmap_config aiu_regmap_cfg = {
+	.reg_bits	= 32,
+	.val_bits	= 32,
+	.reg_stride	= 4,
+	.max_register	= 0x2ac,
+};
+
+static int aiu_clk_bulk_get(struct device *dev,
+			    const char * const *ids,
+			    unsigned int num,
+			    struct aiu_interface *interface)
+{
+	struct clk_bulk_data *clks;
+	int i, ret;
+
+	clks = devm_kcalloc(dev, num, sizeof(*clks), GFP_KERNEL);
+	if (!clks)
+		return -ENOMEM;
+
+	for (i = 0; i < num; i++)
+		clks[i].id = ids[i];
+
+	ret = devm_clk_bulk_get(dev, num, clks);
+	if (ret < 0)
+		return ret;
+
+	interface->clks = clks;
+	interface->clk_num = num;
+	return 0;
+}
+
+static const char * const aiu_i2s_ids[] = {
+	[PCLK]	= "i2s_pclk",
+	[AOCLK]	= "i2s_aoclk",
+	[MCLK]	= "i2s_mclk",
+	[MIXER]	= "i2s_mixer",
+};
+
+static const char * const aiu_spdif_ids[] = {
+	[PCLK]	= "spdif_pclk",
+	[AOCLK]	= "spdif_aoclk",
+	[MCLK]	= "spdif_mclk_sel"
+};
+
+static int aiu_clk_get(struct device *dev)
+{
+	struct aiu *aiu = dev_get_drvdata(dev);
+	int ret;
+
+	aiu->pclk = devm_clk_get(dev, "pclk");
+	if (IS_ERR(aiu->pclk)) {
+		if (PTR_ERR(aiu->pclk) != -EPROBE_DEFER)
+			dev_err(dev, "Can't get the aiu pclk\n");
+		return PTR_ERR(aiu->pclk);
+	}
+
+	aiu->spdif_mclk = devm_clk_get(dev, "spdif_mclk");
+	if (IS_ERR(aiu->spdif_mclk)) {
+		if (PTR_ERR(aiu->spdif_mclk) != -EPROBE_DEFER)
+			dev_err(dev, "Can't get the aiu spdif master clock\n");
+		return PTR_ERR(aiu->spdif_mclk);
+	}
+
+	ret = aiu_clk_bulk_get(dev, aiu_i2s_ids, ARRAY_SIZE(aiu_i2s_ids),
+			       &aiu->i2s);
+	if (ret) {
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "Can't get the i2s clocks\n");
+		return ret;
+	}
+
+	ret = aiu_clk_bulk_get(dev, aiu_spdif_ids, ARRAY_SIZE(aiu_spdif_ids),
+			       &aiu->spdif);
+	if (ret) {
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "Can't get the spdif clocks\n");
+		return ret;
+	}
+
+	ret = clk_prepare_enable(aiu->pclk);
+	if (ret) {
+		dev_err(dev, "peripheral clock enable failed\n");
+		return ret;
+	}
+
+	ret = devm_add_action_or_reset(dev,
+				       (void(*)(void *))clk_disable_unprepare,
+				       aiu->pclk);
+	if (ret)
+		dev_err(dev, "failed to add reset action on pclk");
+
+	return ret;
+}
+
+static int aiu_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	void __iomem *regs;
+	struct regmap *map;
+	struct aiu *aiu;
+	int ret;
+
+	aiu = devm_kzalloc(dev, sizeof(*aiu), GFP_KERNEL);
+	if (!aiu)
+		return -ENOMEM;
+
+	aiu->platform = device_get_match_data(dev);
+	if (!aiu->platform)
+		return -ENODEV;
+
+	platform_set_drvdata(pdev, aiu);
+
+	ret = device_reset(dev);
+	if (ret) {
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "Failed to reset device\n");
+		return ret;
+	}
+
+	regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(regs))
+		return PTR_ERR(regs);
+
+	map = devm_regmap_init_mmio(dev, regs, &aiu_regmap_cfg);
+	if (IS_ERR(map)) {
+		dev_err(dev, "failed to init regmap: %ld\n",
+			PTR_ERR(map));
+		return PTR_ERR(map);
+	}
+
+	aiu->i2s.irq = platform_get_irq_byname(pdev, "i2s");
+	if (aiu->i2s.irq < 0)
+		return aiu->i2s.irq;
+
+	aiu->spdif.irq = platform_get_irq_byname(pdev, "spdif");
+	if (aiu->spdif.irq < 0)
+		return aiu->spdif.irq;
+
+	ret = aiu_clk_get(dev);
+	if (ret)
+		return ret;
+
+	/* Register the cpu component of the aiu */
+	ret = snd_soc_register_component(dev, &aiu_cpu_component,
+					 aiu_cpu_dai_drv,
+					 ARRAY_SIZE(aiu_cpu_dai_drv));
+	if (ret) {
+		dev_err(dev, "Failed to register cpu component\n");
+		return ret;
+	}
+
+	/* Register the hdmi codec control component */
+	ret = aiu_hdmi_ctrl_register_component(dev);
+	if (ret) {
+		dev_err(dev, "Failed to register hdmi control component\n");
+		goto err;
+	}
+
+	/* Register the internal dac control component on gxl */
+	if (aiu->platform->has_acodec) {
+		ret = aiu_acodec_ctrl_register_component(dev);
+		if (ret) {
+			dev_err(dev,
+			    "Failed to register acodec control component\n");
+			goto err;
+		}
+	}
+
+	return 0;
+err:
+	snd_soc_unregister_component(dev);
+	return ret;
+}
+
+static int aiu_remove(struct platform_device *pdev)
+{
+	snd_soc_unregister_component(&pdev->dev);
+
+	return 0;
+}
+
+static const struct aiu_platform_data aiu_gxbb_pdata = {
+	.has_acodec = false,
+	.has_clk_ctrl_more_i2s_div = true,
+};
+
+static const struct aiu_platform_data aiu_gxl_pdata = {
+	.has_acodec = true,
+	.has_clk_ctrl_more_i2s_div = true,
+};
+
+static const struct aiu_platform_data aiu_meson8_pdata = {
+	.has_acodec = false,
+	.has_clk_ctrl_more_i2s_div = false,
+};
+
+static const struct of_device_id aiu_of_match[] = {
+	{ .compatible = "amlogic,aiu-gxbb", .data = &aiu_gxbb_pdata },
+	{ .compatible = "amlogic,aiu-gxl", .data = &aiu_gxl_pdata },
+	{ .compatible = "amlogic,aiu-meson8", .data = &aiu_meson8_pdata },
+	{ .compatible = "amlogic,aiu-meson8b", .data = &aiu_meson8_pdata },
+	{}
+};
+MODULE_DEVICE_TABLE(of, aiu_of_match);
+
+static struct platform_driver aiu_pdrv = {
+	.probe = aiu_probe,
+	.remove = aiu_remove,
+	.driver = {
+		.name = "meson-aiu",
+		.of_match_table = aiu_of_match,
+	},
+};
+module_platform_driver(aiu_pdrv);
+
+MODULE_DESCRIPTION("Meson AIU Driver");
+MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/sound/soc/meson/aiu.h b/sound/soc/meson/aiu.h
new file mode 100644
index 0000000..87aa19a
--- /dev/null
+++ b/sound/soc/meson/aiu.h
@@ -0,0 +1,89 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/*
+ * Copyright (c) 2018 BayLibre, SAS.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+#ifndef _MESON_AIU_H
+#define _MESON_AIU_H
+
+struct clk;
+struct clk_bulk_data;
+struct device;
+struct of_phandle_args;
+struct snd_soc_dai;
+struct snd_soc_dai_ops;
+
+enum aiu_clk_ids {
+	PCLK = 0,
+	AOCLK,
+	MCLK,
+	MIXER
+};
+
+struct aiu_interface {
+	struct clk_bulk_data *clks;
+	unsigned int clk_num;
+	int irq;
+};
+
+struct aiu_platform_data {
+	bool has_acodec;
+	bool has_clk_ctrl_more_i2s_div;
+};
+
+struct aiu {
+	struct clk *pclk;
+	struct clk *spdif_mclk;
+	struct aiu_interface i2s;
+	struct aiu_interface spdif;
+	const struct aiu_platform_data *platform;
+};
+
+#define AIU_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |	\
+		     SNDRV_PCM_FMTBIT_S20_LE |	\
+		     SNDRV_PCM_FMTBIT_S24_LE)
+
+int aiu_of_xlate_dai_name(struct snd_soc_component *component,
+			  struct of_phandle_args *args,
+			  const char **dai_name,
+			  unsigned int component_id);
+
+int aiu_hdmi_ctrl_register_component(struct device *dev);
+int aiu_acodec_ctrl_register_component(struct device *dev);
+
+int aiu_fifo_i2s_dai_probe(struct snd_soc_dai *dai);
+int aiu_fifo_spdif_dai_probe(struct snd_soc_dai *dai);
+
+extern const struct snd_soc_dai_ops aiu_fifo_i2s_dai_ops;
+extern const struct snd_soc_dai_ops aiu_fifo_spdif_dai_ops;
+extern const struct snd_soc_dai_ops aiu_encoder_i2s_dai_ops;
+extern const struct snd_soc_dai_ops aiu_encoder_spdif_dai_ops;
+
+#define AIU_IEC958_BPF			0x000
+#define AIU_958_MISC			0x010
+#define AIU_IEC958_DCU_FF_CTRL		0x01c
+#define AIU_958_CHSTAT_L0		0x020
+#define AIU_958_CHSTAT_L1		0x024
+#define AIU_958_CTRL			0x028
+#define AIU_I2S_SOURCE_DESC		0x034
+#define AIU_I2S_DAC_CFG			0x040
+#define AIU_I2S_SYNC			0x044
+#define AIU_I2S_MISC			0x048
+#define AIU_RST_SOFT			0x054
+#define AIU_CLK_CTRL			0x058
+#define AIU_CLK_CTRL_MORE		0x064
+#define AIU_CODEC_DAC_LRCLK_CTRL	0x0a0
+#define AIU_HDMI_CLK_DATA_CTRL		0x0a8
+#define AIU_ACODEC_CTRL			0x0b0
+#define AIU_958_CHSTAT_R0		0x0c0
+#define AIU_958_CHSTAT_R1		0x0c4
+#define AIU_MEM_I2S_START		0x180
+#define AIU_MEM_I2S_MASKS		0x18c
+#define AIU_MEM_I2S_CONTROL		0x190
+#define AIU_MEM_IEC958_START		0x194
+#define AIU_MEM_IEC958_CONTROL		0x1a4
+#define AIU_MEM_I2S_BUF_CNTL		0x1d8
+#define AIU_MEM_IEC958_BUF_CNTL		0x1fc
+
+#endif /* _MESON_AIU_H */
diff --git a/sound/soc/meson/axg-card.c b/sound/soc/meson/axg-card.c
index 1f698ad..af46845 100644
--- a/sound/soc/meson/axg-card.c
+++ b/sound/soc/meson/axg-card.c
@@ -9,11 +9,7 @@
 #include <sound/soc-dai.h>
 
 #include "axg-tdm.h"
-
-struct axg_card {
-	struct snd_soc_card card;
-	void **link_data;
-};
+#include "meson-card.h"
 
 struct axg_dai_link_tdm_mask {
 	u32 tx;
@@ -41,161 +37,15 @@ static const struct snd_soc_pcm_stream codec_params = {
 	.channels_max = 8,
 };
 
-#define PREFIX "amlogic,"
-
-static int axg_card_reallocate_links(struct axg_card *priv,
-				     unsigned int num_links)
-{
-	struct snd_soc_dai_link *links;
-	void **ldata;
-
-	links = krealloc(priv->card.dai_link,
-			 num_links * sizeof(*priv->card.dai_link),
-			 GFP_KERNEL | __GFP_ZERO);
-	ldata = krealloc(priv->link_data,
-			 num_links * sizeof(*priv->link_data),
-			 GFP_KERNEL | __GFP_ZERO);
-
-	if (!links || !ldata) {
-		dev_err(priv->card.dev, "failed to allocate links\n");
-		return -ENOMEM;
-	}
-
-	priv->card.dai_link = links;
-	priv->link_data = ldata;
-	priv->card.num_links = num_links;
-	return 0;
-}
-
-static int axg_card_parse_dai(struct snd_soc_card *card,
-			      struct device_node *node,
-			      struct device_node **dai_of_node,
-			      const char **dai_name)
-{
-	struct of_phandle_args args;
-	int ret;
-
-	if (!dai_name || !dai_of_node || !node)
-		return -EINVAL;
-
-	ret = of_parse_phandle_with_args(node, "sound-dai",
-					 "#sound-dai-cells", 0, &args);
-	if (ret) {
-		if (ret != -EPROBE_DEFER)
-			dev_err(card->dev, "can't parse dai %d\n", ret);
-		return ret;
-	}
-	*dai_of_node = args.np;
-
-	return snd_soc_get_dai_name(&args, dai_name);
-}
-
-static int axg_card_set_link_name(struct snd_soc_card *card,
-				  struct snd_soc_dai_link *link,
-				  struct device_node *node,
-				  const char *prefix)
-{
-	char *name = devm_kasprintf(card->dev, GFP_KERNEL, "%s.%s",
-				    prefix, node->full_name);
-	if (!name)
-		return -ENOMEM;
-
-	link->name = name;
-	link->stream_name = name;
-
-	return 0;
-}
-
-static void axg_card_clean_references(struct axg_card *priv)
-{
-	struct snd_soc_card *card = &priv->card;
-	struct snd_soc_dai_link *link;
-	struct snd_soc_dai_link_component *codec;
-	struct snd_soc_aux_dev *aux;
-	int i, j;
-
-	if (card->dai_link) {
-		for_each_card_prelinks(card, i, link) {
-			if (link->cpus)
-				of_node_put(link->cpus->of_node);
-			for_each_link_codecs(link, j, codec)
-				of_node_put(codec->of_node);
-		}
-	}
-
-	if (card->aux_dev) {
-		for_each_card_pre_auxs(card, i, aux)
-			of_node_put(aux->dlc.of_node);
-	}
-
-	kfree(card->dai_link);
-	kfree(priv->link_data);
-}
-
-static int axg_card_add_aux_devices(struct snd_soc_card *card)
-{
-	struct device_node *node = card->dev->of_node;
-	struct snd_soc_aux_dev *aux;
-	int num, i;
-
-	num = of_count_phandle_with_args(node, "audio-aux-devs", NULL);
-	if (num == -ENOENT) {
-		/*
-		 * It is ok to have no auxiliary devices but for this card it
-		 * is a strange situtation. Let's warn the about it.
-		 */
-		dev_warn(card->dev, "card has no auxiliary devices\n");
-		return 0;
-	} else if (num < 0) {
-		dev_err(card->dev, "error getting auxiliary devices: %d\n",
-			num);
-		return num;
-	}
-
-	aux = devm_kcalloc(card->dev, num, sizeof(*aux), GFP_KERNEL);
-	if (!aux)
-		return -ENOMEM;
-	card->aux_dev = aux;
-	card->num_aux_devs = num;
-
-	for_each_card_pre_auxs(card, i, aux) {
-		aux->dlc.of_node =
-			of_parse_phandle(node, "audio-aux-devs", i);
-		if (!aux->dlc.of_node)
-			return -EINVAL;
-	}
-
-	return 0;
-}
-
 static int axg_card_tdm_be_hw_params(struct snd_pcm_substream *substream,
 				     struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct axg_card *priv = snd_soc_card_get_drvdata(rtd->card);
+	struct meson_card *priv = snd_soc_card_get_drvdata(rtd->card);
 	struct axg_dai_link_tdm_data *be =
 		(struct axg_dai_link_tdm_data *)priv->link_data[rtd->num];
-	struct snd_soc_dai *codec_dai;
-	unsigned int mclk;
-	int ret, i;
 
-	if (be->mclk_fs) {
-		mclk = params_rate(params) * be->mclk_fs;
-
-		for_each_rtd_codec_dai(rtd, i, codec_dai) {
-			ret = snd_soc_dai_set_sysclk(codec_dai, 0, mclk,
-						     SND_SOC_CLOCK_IN);
-			if (ret && ret != -ENOTSUPP)
-				return ret;
-		}
-
-		ret = snd_soc_dai_set_sysclk(rtd->cpu_dai, 0, mclk,
-					     SND_SOC_CLOCK_OUT);
-		if (ret && ret != -ENOTSUPP)
-			return ret;
-	}
-
-	return 0;
+	return meson_card_i2s_set_sysclk(substream, params, be->mclk_fs);
 }
 
 static const struct snd_soc_ops axg_card_tdm_be_ops = {
@@ -204,13 +54,13 @@ static const struct snd_soc_ops axg_card_tdm_be_ops = {
 
 static int axg_card_tdm_dai_init(struct snd_soc_pcm_runtime *rtd)
 {
-	struct axg_card *priv = snd_soc_card_get_drvdata(rtd->card);
+	struct meson_card *priv = snd_soc_card_get_drvdata(rtd->card);
 	struct axg_dai_link_tdm_data *be =
 		(struct axg_dai_link_tdm_data *)priv->link_data[rtd->num];
 	struct snd_soc_dai *codec_dai;
 	int ret, i;
 
-	for_each_rtd_codec_dai(rtd, i, codec_dai) {
+	for_each_rtd_codec_dais(rtd, i, codec_dai) {
 		ret = snd_soc_dai_set_tdm_slot(codec_dai,
 					       be->codec_masks[i].tx,
 					       be->codec_masks[i].rx,
@@ -222,10 +72,10 @@ static int axg_card_tdm_dai_init(struct snd_soc_pcm_runtime *rtd)
 		}
 	}
 
-	ret = axg_tdm_set_tdm_slots(rtd->cpu_dai, be->tx_mask, be->rx_mask,
+	ret = axg_tdm_set_tdm_slots(asoc_rtd_to_cpu(rtd, 0), be->tx_mask, be->rx_mask,
 				    be->slots, be->slot_width);
 	if (ret) {
-		dev_err(rtd->cpu_dai->dev, "setting tdm link slots failed\n");
+		dev_err(asoc_rtd_to_cpu(rtd, 0)->dev, "setting tdm link slots failed\n");
 		return ret;
 	}
 
@@ -234,16 +84,16 @@ static int axg_card_tdm_dai_init(struct snd_soc_pcm_runtime *rtd)
 
 static int axg_card_tdm_dai_lb_init(struct snd_soc_pcm_runtime *rtd)
 {
-	struct axg_card *priv = snd_soc_card_get_drvdata(rtd->card);
+	struct meson_card *priv = snd_soc_card_get_drvdata(rtd->card);
 	struct axg_dai_link_tdm_data *be =
 		(struct axg_dai_link_tdm_data *)priv->link_data[rtd->num];
 	int ret;
 
 	/* The loopback rx_mask is the pad tx_mask */
-	ret = axg_tdm_set_tdm_slots(rtd->cpu_dai, NULL, be->tx_mask,
+	ret = axg_tdm_set_tdm_slots(asoc_rtd_to_cpu(rtd, 0), NULL, be->tx_mask,
 				    be->slots, be->slot_width);
 	if (ret) {
-		dev_err(rtd->cpu_dai->dev, "setting tdm link slots failed\n");
+		dev_err(asoc_rtd_to_cpu(rtd, 0)->dev, "setting tdm link slots failed\n");
 		return ret;
 	}
 
@@ -253,14 +103,14 @@ static int axg_card_tdm_dai_lb_init(struct snd_soc_pcm_runtime *rtd)
 static int axg_card_add_tdm_loopback(struct snd_soc_card *card,
 				     int *index)
 {
-	struct axg_card *priv = snd_soc_card_get_drvdata(card);
+	struct meson_card *priv = snd_soc_card_get_drvdata(card);
 	struct snd_soc_dai_link *pad = &card->dai_link[*index];
 	struct snd_soc_dai_link *lb;
 	struct snd_soc_dai_link_component *dlc;
 	int ret;
 
 	/* extend links */
-	ret = axg_card_reallocate_links(priv, card->num_links + 1);
+	ret = meson_card_reallocate_links(card, card->num_links + 1);
 	if (ret)
 		return ret;
 
@@ -304,32 +154,6 @@ static int axg_card_add_tdm_loopback(struct snd_soc_card *card,
 	return 0;
 }
 
-static unsigned int axg_card_parse_daifmt(struct device_node *node,
-					  struct device_node *cpu_node)
-{
-	struct device_node *bitclkmaster = NULL;
-	struct device_node *framemaster = NULL;
-	unsigned int daifmt;
-
-	daifmt = snd_soc_of_parse_daifmt(node, PREFIX,
-					 &bitclkmaster, &framemaster);
-	daifmt &= ~SND_SOC_DAIFMT_MASTER_MASK;
-
-	/* If no master is provided, default to cpu master */
-	if (!bitclkmaster || bitclkmaster == cpu_node) {
-		daifmt |= (!framemaster || framemaster == cpu_node) ?
-			SND_SOC_DAIFMT_CBS_CFS : SND_SOC_DAIFMT_CBS_CFM;
-	} else {
-		daifmt |= (!framemaster || framemaster == cpu_node) ?
-			SND_SOC_DAIFMT_CBM_CFS : SND_SOC_DAIFMT_CBM_CFM;
-	}
-
-	of_node_put(bitclkmaster);
-	of_node_put(framemaster);
-
-	return daifmt;
-}
-
 static int axg_card_parse_cpu_tdm_slots(struct snd_soc_card *card,
 					struct snd_soc_dai_link *link,
 					struct device_node *node,
@@ -424,7 +248,7 @@ static int axg_card_parse_tdm(struct snd_soc_card *card,
 			      struct device_node *node,
 			      int *index)
 {
-	struct axg_card *priv = snd_soc_card_get_drvdata(card);
+	struct meson_card *priv = snd_soc_card_get_drvdata(card);
 	struct snd_soc_dai_link *link = &card->dai_link[*index];
 	struct axg_dai_link_tdm_data *be;
 	int ret;
@@ -438,7 +262,7 @@ static int axg_card_parse_tdm(struct snd_soc_card *card,
 	/* Setup tdm link */
 	link->ops = &axg_card_tdm_be_ops;
 	link->init = axg_card_tdm_dai_init;
-	link->dai_fmt = axg_card_parse_daifmt(node, link->cpus->of_node);
+	link->dai_fmt = meson_card_parse_daifmt(node, link->cpus->of_node);
 
 	of_property_read_u32(node, "mclk-fs", &be->mclk_fs);
 
@@ -462,97 +286,25 @@ static int axg_card_parse_tdm(struct snd_soc_card *card,
 	return 0;
 }
 
-static int axg_card_set_be_link(struct snd_soc_card *card,
-				struct snd_soc_dai_link *link,
-				struct device_node *node)
-{
-	struct snd_soc_dai_link_component *codec;
-	struct device_node *np;
-	int ret, num_codecs;
-
-	link->no_pcm = 1;
-	link->dpcm_playback = 1;
-	link->dpcm_capture = 1;
-
-	num_codecs = of_get_child_count(node);
-	if (!num_codecs) {
-		dev_err(card->dev, "be link %s has no codec\n",
-			node->full_name);
-		return -EINVAL;
-	}
-
-	codec = devm_kcalloc(card->dev, num_codecs, sizeof(*codec), GFP_KERNEL);
-	if (!codec)
-		return -ENOMEM;
-
-	link->codecs = codec;
-	link->num_codecs = num_codecs;
-
-	for_each_child_of_node(node, np) {
-		ret = axg_card_parse_dai(card, np, &codec->of_node,
-					 &codec->dai_name);
-		if (ret) {
-			of_node_put(np);
-			return ret;
-		}
-
-		codec++;
-	}
-
-	ret = axg_card_set_link_name(card, link, node, "be");
-	if (ret)
-		dev_err(card->dev, "error setting %pOFn link name\n", np);
-
-	return ret;
-}
-
-static int axg_card_set_fe_link(struct snd_soc_card *card,
-				struct snd_soc_dai_link *link,
-				struct device_node *node,
-				bool is_playback)
-{
-	struct snd_soc_dai_link_component *codec;
-
-	codec = devm_kzalloc(card->dev, sizeof(*codec), GFP_KERNEL);
-	if (!codec)
-		return -ENOMEM;
-
-	link->codecs = codec;
-	link->num_codecs = 1;
-
-	link->dynamic = 1;
-	link->dpcm_merged_format = 1;
-	link->dpcm_merged_chan = 1;
-	link->dpcm_merged_rate = 1;
-	link->codecs->dai_name = "snd-soc-dummy-dai";
-	link->codecs->name = "snd-soc-dummy";
-
-	if (is_playback)
-		link->dpcm_playback = 1;
-	else
-		link->dpcm_capture = 1;
-
-	return axg_card_set_link_name(card, link, node, "fe");
-}
-
 static int axg_card_cpu_is_capture_fe(struct device_node *np)
 {
-	return of_device_is_compatible(np, PREFIX "axg-toddr");
+	return of_device_is_compatible(np, DT_PREFIX "axg-toddr");
 }
 
 static int axg_card_cpu_is_playback_fe(struct device_node *np)
 {
-	return of_device_is_compatible(np, PREFIX "axg-frddr");
+	return of_device_is_compatible(np, DT_PREFIX "axg-frddr");
 }
 
 static int axg_card_cpu_is_tdm_iface(struct device_node *np)
 {
-	return of_device_is_compatible(np, PREFIX "axg-tdm-iface");
+	return of_device_is_compatible(np, DT_PREFIX "axg-tdm-iface");
 }
 
 static int axg_card_cpu_is_codec(struct device_node *np)
 {
-	return of_device_is_compatible(np, PREFIX "g12a-tohdmitx");
+	return of_device_is_compatible(np, DT_PREFIX "g12a-tohdmitx") ||
+		of_device_is_compatible(np, DT_PREFIX "g12a-toacodec");
 }
 
 static int axg_card_add_link(struct snd_soc_card *card, struct device_node *np,
@@ -569,17 +321,17 @@ static int axg_card_add_link(struct snd_soc_card *card, struct device_node *np,
 	dai_link->cpus = cpu;
 	dai_link->num_cpus = 1;
 
-	ret = axg_card_parse_dai(card, np, &dai_link->cpus->of_node,
-				 &dai_link->cpus->dai_name);
+	ret = meson_card_parse_dai(card, np, &dai_link->cpus->of_node,
+				   &dai_link->cpus->dai_name);
 	if (ret)
 		return ret;
 
 	if (axg_card_cpu_is_playback_fe(dai_link->cpus->of_node))
-		ret = axg_card_set_fe_link(card, dai_link, np, true);
+		ret = meson_card_set_fe_link(card, dai_link, np, true);
 	else if (axg_card_cpu_is_capture_fe(dai_link->cpus->of_node))
-		ret = axg_card_set_fe_link(card, dai_link, np, false);
+		ret = meson_card_set_fe_link(card, dai_link, np, false);
 	else
-		ret = axg_card_set_be_link(card, dai_link, np);
+		ret = meson_card_set_be_link(card, dai_link, np);
 
 	if (ret)
 		return ret;
@@ -592,121 +344,21 @@ static int axg_card_add_link(struct snd_soc_card *card, struct device_node *np,
 	return ret;
 }
 
-static int axg_card_add_links(struct snd_soc_card *card)
-{
-	struct axg_card *priv = snd_soc_card_get_drvdata(card);
-	struct device_node *node = card->dev->of_node;
-	struct device_node *np;
-	int num, i, ret;
-
-	num = of_get_child_count(node);
-	if (!num) {
-		dev_err(card->dev, "card has no links\n");
-		return -EINVAL;
-	}
-
-	ret = axg_card_reallocate_links(priv, num);
-	if (ret)
-		return ret;
-
-	i = 0;
-	for_each_child_of_node(node, np) {
-		ret = axg_card_add_link(card, np, &i);
-		if (ret) {
-			of_node_put(np);
-			return ret;
-		}
-
-		i++;
-	}
-
-	return 0;
-}
-
-static int axg_card_parse_of_optional(struct snd_soc_card *card,
-				      const char *propname,
-				      int (*func)(struct snd_soc_card *c,
-						  const char *p))
-{
-	/* If property is not provided, don't fail ... */
-	if (!of_property_read_bool(card->dev->of_node, propname))
-		return 0;
-
-	/* ... but do fail if it is provided and the parsing fails */
-	return func(card, propname);
-}
+static const struct meson_card_match_data axg_card_match_data = {
+	.add_link = axg_card_add_link,
+};
 
 static const struct of_device_id axg_card_of_match[] = {
-	{ .compatible = "amlogic,axg-sound-card", },
-	{}
+	{
+		.compatible = "amlogic,axg-sound-card",
+		.data = &axg_card_match_data,
+	}, {}
 };
 MODULE_DEVICE_TABLE(of, axg_card_of_match);
 
-static int axg_card_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct axg_card *priv;
-	int ret;
-
-	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-	if (!priv)
-		return -ENOMEM;
-
-	platform_set_drvdata(pdev, priv);
-	snd_soc_card_set_drvdata(&priv->card, priv);
-
-	priv->card.owner = THIS_MODULE;
-	priv->card.dev = dev;
-
-	ret = snd_soc_of_parse_card_name(&priv->card, "model");
-	if (ret < 0)
-		return ret;
-
-	ret = axg_card_parse_of_optional(&priv->card, "audio-routing",
-					 snd_soc_of_parse_audio_routing);
-	if (ret) {
-		dev_err(dev, "error while parsing routing\n");
-		return ret;
-	}
-
-	ret = axg_card_parse_of_optional(&priv->card, "audio-widgets",
-					 snd_soc_of_parse_audio_simple_widgets);
-	if (ret) {
-		dev_err(dev, "error while parsing widgets\n");
-		return ret;
-	}
-
-	ret = axg_card_add_links(&priv->card);
-	if (ret)
-		goto out_err;
-
-	ret = axg_card_add_aux_devices(&priv->card);
-	if (ret)
-		goto out_err;
-
-	ret = devm_snd_soc_register_card(dev, &priv->card);
-	if (ret)
-		goto out_err;
-
-	return 0;
-
-out_err:
-	axg_card_clean_references(priv);
-	return ret;
-}
-
-static int axg_card_remove(struct platform_device *pdev)
-{
-	struct axg_card *priv = platform_get_drvdata(pdev);
-
-	axg_card_clean_references(priv);
-
-	return 0;
-}
-
 static struct platform_driver axg_card_pdrv = {
-	.probe = axg_card_probe,
-	.remove = axg_card_remove,
+	.probe = meson_card_probe,
+	.remove = meson_card_remove,
 	.driver = {
 		.name = "axg-sound-card",
 		.of_match_table = axg_card_of_match,
diff --git a/sound/soc/meson/axg-fifo.c b/sound/soc/meson/axg-fifo.c
index c12b0d5..2e9b56b 100644
--- a/sound/soc/meson/axg-fifo.c
+++ b/sound/soc/meson/axg-fifo.c
@@ -47,7 +47,7 @@ static struct snd_soc_dai *axg_fifo_dai(struct snd_pcm_substream *ss)
 {
 	struct snd_soc_pcm_runtime *rtd = ss->private_data;
 
-	return rtd->cpu_dai;
+	return asoc_rtd_to_cpu(rtd, 0);
 }
 
 static struct axg_fifo *axg_fifo_data(struct snd_pcm_substream *ss)
diff --git a/sound/soc/meson/g12a-toacodec.c b/sound/soc/meson/g12a-toacodec.c
new file mode 100644
index 0000000..9339fab
--- /dev/null
+++ b/sound/soc/meson/g12a-toacodec.c
@@ -0,0 +1,252 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2020 BayLibre, SAS.
+// Author: Jerome Brunet <jbrunet@baylibre.com>
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <sound/pcm_params.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+#include <sound/soc.h>
+#include <sound/soc-dai.h>
+
+#include <dt-bindings/sound/meson-g12a-toacodec.h>
+#include "axg-tdm.h"
+#include "meson-codec-glue.h"
+
+#define G12A_TOACODEC_DRV_NAME "g12a-toacodec"
+
+#define TOACODEC_CTRL0			0x0
+#define  CTRL0_ENABLE_SHIFT		31
+#define  CTRL0_DAT_SEL_SHIFT		14
+#define  CTRL0_DAT_SEL			(0x3 << CTRL0_DAT_SEL_SHIFT)
+#define  CTRL0_LANE_SEL			12
+#define  CTRL0_LRCLK_SEL		GENMASK(9, 8)
+#define  CTRL0_BLK_CAP_INV		BIT(7)
+#define  CTRL0_BCLK_O_INV		BIT(6)
+#define  CTRL0_BCLK_SEL			GENMASK(5, 4)
+#define  CTRL0_MCLK_SEL			GENMASK(2, 0)
+
+#define TOACODEC_OUT_CHMAX		2
+
+static const char * const g12a_toacodec_mux_texts[] = {
+	"I2S A", "I2S B", "I2S C",
+};
+
+static int g12a_toacodec_mux_put_enum(struct snd_kcontrol *kcontrol,
+				      struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component =
+		snd_soc_dapm_kcontrol_component(kcontrol);
+	struct snd_soc_dapm_context *dapm =
+		snd_soc_dapm_kcontrol_dapm(kcontrol);
+	struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
+	unsigned int mux, changed;
+
+	mux = snd_soc_enum_item_to_val(e, ucontrol->value.enumerated.item[0]);
+	changed = snd_soc_component_test_bits(component, e->reg,
+					      CTRL0_DAT_SEL,
+					      FIELD_PREP(CTRL0_DAT_SEL, mux));
+
+	if (!changed)
+		return 0;
+
+	/* Force disconnect of the mux while updating */
+	snd_soc_dapm_mux_update_power(dapm, kcontrol, 0, NULL, NULL);
+
+	snd_soc_component_update_bits(component, e->reg,
+				      CTRL0_DAT_SEL |
+				      CTRL0_LRCLK_SEL |
+				      CTRL0_BCLK_SEL,
+				      FIELD_PREP(CTRL0_DAT_SEL, mux) |
+				      FIELD_PREP(CTRL0_LRCLK_SEL, mux) |
+				      FIELD_PREP(CTRL0_BCLK_SEL, mux));
+
+	/*
+	 * FIXME:
+	 * On this soc, the glue gets the MCLK directly from the clock
+	 * controller instead of going the through the TDM interface.
+	 *
+	 * Here we assume interface A uses clock A, etc ... While it is
+	 * true for now, it could be different. Instead the glue should
+	 * find out the clock used by the interface and select the same
+	 * source. For that, we will need regmap backed clock mux which
+	 * is a work in progress
+	 */
+	snd_soc_component_update_bits(component, e->reg,
+				      CTRL0_MCLK_SEL,
+				      FIELD_PREP(CTRL0_MCLK_SEL, mux));
+
+	snd_soc_dapm_mux_update_power(dapm, kcontrol, mux, e, NULL);
+
+	return 0;
+}
+
+static SOC_ENUM_SINGLE_DECL(g12a_toacodec_mux_enum, TOACODEC_CTRL0,
+			    CTRL0_DAT_SEL_SHIFT,
+			    g12a_toacodec_mux_texts);
+
+static const struct snd_kcontrol_new g12a_toacodec_mux =
+	SOC_DAPM_ENUM_EXT("Source", g12a_toacodec_mux_enum,
+			  snd_soc_dapm_get_enum_double,
+			  g12a_toacodec_mux_put_enum);
+
+static const struct snd_kcontrol_new g12a_toacodec_out_enable =
+	SOC_DAPM_SINGLE_AUTODISABLE("Switch", TOACODEC_CTRL0,
+				    CTRL0_ENABLE_SHIFT, 1, 0);
+
+static const struct snd_soc_dapm_widget g12a_toacodec_widgets[] = {
+	SND_SOC_DAPM_MUX("SRC", SND_SOC_NOPM, 0, 0,
+			 &g12a_toacodec_mux),
+	SND_SOC_DAPM_SWITCH("OUT EN", SND_SOC_NOPM, 0, 0,
+			    &g12a_toacodec_out_enable),
+};
+
+static int g12a_toacodec_input_hw_params(struct snd_pcm_substream *substream,
+					 struct snd_pcm_hw_params *params,
+					 struct snd_soc_dai *dai)
+{
+	struct meson_codec_glue_input *data;
+	int ret;
+
+	ret = meson_codec_glue_input_hw_params(substream, params, dai);
+	if (ret)
+		return ret;
+
+	/* The glue will provide 1 lane out of the 4 to the output */
+	data = meson_codec_glue_input_get_data(dai);
+	data->params.channels_min = min_t(unsigned int, TOACODEC_OUT_CHMAX,
+					data->params.channels_min);
+	data->params.channels_max = min_t(unsigned int, TOACODEC_OUT_CHMAX,
+					data->params.channels_max);
+
+	return 0;
+}
+
+static const struct snd_soc_dai_ops g12a_toacodec_input_ops = {
+	.hw_params	= g12a_toacodec_input_hw_params,
+	.set_fmt	= meson_codec_glue_input_set_fmt,
+};
+
+static const struct snd_soc_dai_ops g12a_toacodec_output_ops = {
+	.startup	= meson_codec_glue_output_startup,
+};
+
+#define TOACODEC_STREAM(xname, xsuffix, xchmax)			\
+{								\
+	.stream_name	= xname " " xsuffix,			\
+	.channels_min	= 1,					\
+	.channels_max	= (xchmax),				\
+	.rate_min       = 5512,					\
+	.rate_max	= 192000,				\
+	.formats	= AXG_TDM_FORMATS,			\
+}
+
+#define TOACODEC_INPUT(xname, xid) {					\
+	.name = xname,							\
+	.id = (xid),							\
+	.playback = TOACODEC_STREAM(xname, "Playback", 8),		\
+	.ops = &g12a_toacodec_input_ops,				\
+	.probe = meson_codec_glue_input_dai_probe,			\
+	.remove = meson_codec_glue_input_dai_remove,			\
+}
+
+#define TOACODEC_OUTPUT(xname, xid) {					\
+	.name = xname,							\
+	.id = (xid),							\
+	.capture = TOACODEC_STREAM(xname, "Capture", TOACODEC_OUT_CHMAX), \
+	.ops = &g12a_toacodec_output_ops,				\
+}
+
+static struct snd_soc_dai_driver g12a_toacodec_dai_drv[] = {
+	TOACODEC_INPUT("IN A", TOACODEC_IN_A),
+	TOACODEC_INPUT("IN B", TOACODEC_IN_B),
+	TOACODEC_INPUT("IN C", TOACODEC_IN_C),
+	TOACODEC_OUTPUT("OUT", TOACODEC_OUT),
+};
+
+static int g12a_toacodec_component_probe(struct snd_soc_component *c)
+{
+	/* Initialize the static clock parameters */
+	return snd_soc_component_write(c, TOACODEC_CTRL0,
+				       CTRL0_BLK_CAP_INV);
+}
+
+static const struct snd_soc_dapm_route g12a_toacodec_routes[] = {
+	{ "SRC", "I2S A", "IN A Playback" },
+	{ "SRC", "I2S B", "IN B Playback" },
+	{ "SRC", "I2S C", "IN C Playback" },
+	{ "OUT EN", "Switch", "SRC" },
+	{ "OUT Capture", NULL, "OUT EN" },
+};
+
+static const struct snd_kcontrol_new g12a_toacodec_controls[] = {
+	SOC_SINGLE("Lane Select", TOACODEC_CTRL0, CTRL0_LANE_SEL, 3, 0),
+};
+
+static const struct snd_soc_component_driver g12a_toacodec_component_drv = {
+	.probe			= g12a_toacodec_component_probe,
+	.controls		= g12a_toacodec_controls,
+	.num_controls		= ARRAY_SIZE(g12a_toacodec_controls),
+	.dapm_widgets		= g12a_toacodec_widgets,
+	.num_dapm_widgets	= ARRAY_SIZE(g12a_toacodec_widgets),
+	.dapm_routes		= g12a_toacodec_routes,
+	.num_dapm_routes	= ARRAY_SIZE(g12a_toacodec_routes),
+	.endianness		= 1,
+	.non_legacy_dai_naming	= 1,
+};
+
+static const struct regmap_config g12a_toacodec_regmap_cfg = {
+	.reg_bits	= 32,
+	.val_bits	= 32,
+	.reg_stride	= 4,
+};
+
+static const struct of_device_id g12a_toacodec_of_match[] = {
+	{ .compatible = "amlogic,g12a-toacodec", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, g12a_toacodec_of_match);
+
+static int g12a_toacodec_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	void __iomem *regs;
+	struct regmap *map;
+	int ret;
+
+	ret = device_reset(dev);
+	if (ret)
+		return ret;
+
+	regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(regs))
+		return PTR_ERR(regs);
+
+	map = devm_regmap_init_mmio(dev, regs, &g12a_toacodec_regmap_cfg);
+	if (IS_ERR(map)) {
+		dev_err(dev, "failed to init regmap: %ld\n",
+			PTR_ERR(map));
+		return PTR_ERR(map);
+	}
+
+	return devm_snd_soc_register_component(dev,
+			&g12a_toacodec_component_drv, g12a_toacodec_dai_drv,
+			ARRAY_SIZE(g12a_toacodec_dai_drv));
+}
+
+static struct platform_driver g12a_toacodec_pdrv = {
+	.driver = {
+		.name = G12A_TOACODEC_DRV_NAME,
+		.of_match_table = g12a_toacodec_of_match,
+	},
+	.probe = g12a_toacodec_probe,
+};
+module_platform_driver(g12a_toacodec_pdrv);
+
+MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>");
+MODULE_DESCRIPTION("Amlogic G12a To Internal DAC Codec Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/sound/soc/meson/g12a-tohdmitx.c b/sound/soc/meson/g12a-tohdmitx.c
index 8a0db28..9b2b595 100644
--- a/sound/soc/meson/g12a-tohdmitx.c
+++ b/sound/soc/meson/g12a-tohdmitx.c
@@ -13,112 +13,51 @@
 #include <sound/soc-dai.h>
 
 #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+#include "meson-codec-glue.h"
 
 #define G12A_TOHDMITX_DRV_NAME "g12a-tohdmitx"
 
 #define TOHDMITX_CTRL0			0x0
 #define  CTRL0_ENABLE_SHIFT		31
-#define  CTRL0_I2S_DAT_SEL		GENMASK(13, 12)
+#define  CTRL0_I2S_DAT_SEL_SHIFT	12
+#define  CTRL0_I2S_DAT_SEL		(0x3 << CTRL0_I2S_DAT_SEL_SHIFT)
 #define  CTRL0_I2S_LRCLK_SEL		GENMASK(9, 8)
 #define  CTRL0_I2S_BLK_CAP_INV		BIT(7)
 #define  CTRL0_I2S_BCLK_O_INV		BIT(6)
 #define  CTRL0_I2S_BCLK_SEL		GENMASK(5, 4)
 #define  CTRL0_SPDIF_CLK_CAP_INV	BIT(3)
 #define  CTRL0_SPDIF_CLK_O_INV		BIT(2)
-#define  CTRL0_SPDIF_SEL		BIT(1)
+#define  CTRL0_SPDIF_SEL_SHIFT		1
+#define  CTRL0_SPDIF_SEL		(0x1 << CTRL0_SPDIF_SEL_SHIFT)
 #define  CTRL0_SPDIF_CLK_SEL		BIT(0)
 
-struct g12a_tohdmitx_input {
-	struct snd_soc_pcm_stream params;
-	unsigned int fmt;
-};
-
-static struct snd_soc_dapm_widget *
-g12a_tohdmitx_get_input(struct snd_soc_dapm_widget *w)
-{
-	struct snd_soc_dapm_path *p = NULL;
-	struct snd_soc_dapm_widget *in;
-
-	snd_soc_dapm_widget_for_each_source_path(w, p) {
-		if (!p->connect)
-			continue;
-
-		/* Check that we still are in the same component */
-		if (snd_soc_dapm_to_component(w->dapm) !=
-		    snd_soc_dapm_to_component(p->source->dapm))
-			continue;
-
-		if (p->source->id == snd_soc_dapm_dai_in)
-			return p->source;
-
-		in = g12a_tohdmitx_get_input(p->source);
-		if (in)
-			return in;
-	}
-
-	return NULL;
-}
-
-static struct g12a_tohdmitx_input *
-g12a_tohdmitx_get_input_data(struct snd_soc_dapm_widget *w)
-{
-	struct snd_soc_dapm_widget *in =
-		g12a_tohdmitx_get_input(w);
-	struct snd_soc_dai *dai;
-
-	if (WARN_ON(!in))
-		return NULL;
-
-	dai = in->priv;
-
-	return dai->playback_dma_data;
-}
-
 static const char * const g12a_tohdmitx_i2s_mux_texts[] = {
 	"I2S A", "I2S B", "I2S C",
 };
 
-static SOC_ENUM_SINGLE_EXT_DECL(g12a_tohdmitx_i2s_mux_enum,
-				g12a_tohdmitx_i2s_mux_texts);
-
-static int g12a_tohdmitx_get_input_val(struct snd_soc_component *component,
-				       unsigned int mask)
-{
-	unsigned int val;
-
-	snd_soc_component_read(component, TOHDMITX_CTRL0, &val);
-	return (val & mask) >> __ffs(mask);
-}
-
-static int g12a_tohdmitx_i2s_mux_get_enum(struct snd_kcontrol *kcontrol,
-					  struct snd_ctl_elem_value *ucontrol)
-{
-	struct snd_soc_component *component =
-		snd_soc_dapm_kcontrol_component(kcontrol);
-
-	ucontrol->value.enumerated.item[0] =
-		g12a_tohdmitx_get_input_val(component, CTRL0_I2S_DAT_SEL);
-
-	return 0;
-}
-
 static int g12a_tohdmitx_i2s_mux_put_enum(struct snd_kcontrol *kcontrol,
-					  struct snd_ctl_elem_value *ucontrol)
+				   struct snd_ctl_elem_value *ucontrol)
 {
 	struct snd_soc_component *component =
 		snd_soc_dapm_kcontrol_component(kcontrol);
 	struct snd_soc_dapm_context *dapm =
 		snd_soc_dapm_kcontrol_dapm(kcontrol);
 	struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
-	unsigned int mux = ucontrol->value.enumerated.item[0];
-	unsigned int val = g12a_tohdmitx_get_input_val(component,
-						       CTRL0_I2S_DAT_SEL);
+	unsigned int mux, changed;
+
+	mux = snd_soc_enum_item_to_val(e, ucontrol->value.enumerated.item[0]);
+	changed = snd_soc_component_test_bits(component, e->reg,
+					      CTRL0_I2S_DAT_SEL,
+					      FIELD_PREP(CTRL0_I2S_DAT_SEL,
+							 mux));
+
+	if (!changed)
+		return 0;
 
 	/* Force disconnect of the mux while updating */
-	if (val != mux)
-		snd_soc_dapm_mux_update_power(dapm, kcontrol, 0, NULL, NULL);
+	snd_soc_dapm_mux_update_power(dapm, kcontrol, 0, NULL, NULL);
 
-	snd_soc_component_update_bits(component, TOHDMITX_CTRL0,
+	snd_soc_component_update_bits(component, e->reg,
 				      CTRL0_I2S_DAT_SEL |
 				      CTRL0_I2S_LRCLK_SEL |
 				      CTRL0_I2S_BCLK_SEL,
@@ -131,30 +70,19 @@ static int g12a_tohdmitx_i2s_mux_put_enum(struct snd_kcontrol *kcontrol,
 	return 0;
 }
 
+static SOC_ENUM_SINGLE_DECL(g12a_tohdmitx_i2s_mux_enum, TOHDMITX_CTRL0,
+			    CTRL0_I2S_DAT_SEL_SHIFT,
+			    g12a_tohdmitx_i2s_mux_texts);
+
 static const struct snd_kcontrol_new g12a_tohdmitx_i2s_mux =
 	SOC_DAPM_ENUM_EXT("I2S Source", g12a_tohdmitx_i2s_mux_enum,
-			  g12a_tohdmitx_i2s_mux_get_enum,
+			  snd_soc_dapm_get_enum_double,
 			  g12a_tohdmitx_i2s_mux_put_enum);
 
 static const char * const g12a_tohdmitx_spdif_mux_texts[] = {
 	"SPDIF A", "SPDIF B",
 };
 
-static SOC_ENUM_SINGLE_EXT_DECL(g12a_tohdmitx_spdif_mux_enum,
-				g12a_tohdmitx_spdif_mux_texts);
-
-static int g12a_tohdmitx_spdif_mux_get_enum(struct snd_kcontrol *kcontrol,
-					    struct snd_ctl_elem_value *ucontrol)
-{
-	struct snd_soc_component *component =
-		snd_soc_dapm_kcontrol_component(kcontrol);
-
-	ucontrol->value.enumerated.item[0] =
-		g12a_tohdmitx_get_input_val(component, CTRL0_SPDIF_SEL);
-
-	return 0;
-}
-
 static int g12a_tohdmitx_spdif_mux_put_enum(struct snd_kcontrol *kcontrol,
 					    struct snd_ctl_elem_value *ucontrol)
 {
@@ -163,13 +91,18 @@ static int g12a_tohdmitx_spdif_mux_put_enum(struct snd_kcontrol *kcontrol,
 	struct snd_soc_dapm_context *dapm =
 		snd_soc_dapm_kcontrol_dapm(kcontrol);
 	struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
-	unsigned int mux = ucontrol->value.enumerated.item[0];
-	unsigned int val = g12a_tohdmitx_get_input_val(component,
-						       CTRL0_SPDIF_SEL);
+	unsigned int mux, changed;
+
+	mux = snd_soc_enum_item_to_val(e, ucontrol->value.enumerated.item[0]);
+	changed = snd_soc_component_test_bits(component, TOHDMITX_CTRL0,
+					      CTRL0_SPDIF_SEL,
+					      FIELD_PREP(CTRL0_SPDIF_SEL, mux));
+
+	if (!changed)
+		return 0;
 
 	/* Force disconnect of the mux while updating */
-	if (val != mux)
-		snd_soc_dapm_mux_update_power(dapm, kcontrol, 0, NULL, NULL);
+	snd_soc_dapm_mux_update_power(dapm, kcontrol, 0, NULL, NULL);
 
 	snd_soc_component_update_bits(component, TOHDMITX_CTRL0,
 				      CTRL0_SPDIF_SEL |
@@ -182,9 +115,13 @@ static int g12a_tohdmitx_spdif_mux_put_enum(struct snd_kcontrol *kcontrol,
 	return 0;
 }
 
+static SOC_ENUM_SINGLE_DECL(g12a_tohdmitx_spdif_mux_enum, TOHDMITX_CTRL0,
+			    CTRL0_SPDIF_SEL_SHIFT,
+			    g12a_tohdmitx_spdif_mux_texts);
+
 static const struct snd_kcontrol_new g12a_tohdmitx_spdif_mux =
 	SOC_DAPM_ENUM_EXT("SPDIF Source", g12a_tohdmitx_spdif_mux_enum,
-			  g12a_tohdmitx_spdif_mux_get_enum,
+			  snd_soc_dapm_get_enum_double,
 			  g12a_tohdmitx_spdif_mux_put_enum);
 
 static const struct snd_kcontrol_new g12a_tohdmitx_out_enable =
@@ -202,83 +139,13 @@ static const struct snd_soc_dapm_widget g12a_tohdmitx_widgets[] = {
 			    &g12a_tohdmitx_out_enable),
 };
 
-static int g12a_tohdmitx_input_probe(struct snd_soc_dai *dai)
-{
-	struct g12a_tohdmitx_input *data;
-
-	data = kzalloc(sizeof(*data), GFP_KERNEL);
-	if (!data)
-		return -ENOMEM;
-
-	dai->playback_dma_data = data;
-	return 0;
-}
-
-static int g12a_tohdmitx_input_remove(struct snd_soc_dai *dai)
-{
-	kfree(dai->playback_dma_data);
-	return 0;
-}
-
-static int g12a_tohdmitx_input_hw_params(struct snd_pcm_substream *substream,
-					 struct snd_pcm_hw_params *params,
-					 struct snd_soc_dai *dai)
-{
-	struct g12a_tohdmitx_input *data = dai->playback_dma_data;
-
-	data->params.rates = snd_pcm_rate_to_rate_bit(params_rate(params));
-	data->params.rate_min = params_rate(params);
-	data->params.rate_max = params_rate(params);
-	data->params.formats = 1 << params_format(params);
-	data->params.channels_min = params_channels(params);
-	data->params.channels_max = params_channels(params);
-	data->params.sig_bits = dai->driver->playback.sig_bits;
-
-	return 0;
-}
-
-
-static int g12a_tohdmitx_input_set_fmt(struct snd_soc_dai *dai,
-				       unsigned int fmt)
-{
-	struct g12a_tohdmitx_input *data = dai->playback_dma_data;
-
-	/* Save the source stream format for the downstream link */
-	data->fmt = fmt;
-	return 0;
-}
-
-static int g12a_tohdmitx_output_startup(struct snd_pcm_substream *substream,
-					struct snd_soc_dai *dai)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct g12a_tohdmitx_input *in_data =
-		g12a_tohdmitx_get_input_data(dai->capture_widget);
-
-	if (!in_data)
-		return -ENODEV;
-
-	if (WARN_ON(!rtd->dai_link->params)) {
-		dev_warn(dai->dev, "codec2codec link expected\n");
-		return -EINVAL;
-	}
-
-	/* Replace link params with the input params */
-	rtd->dai_link->params = &in_data->params;
-
-	if (!in_data->fmt)
-		return 0;
-
-	return snd_soc_runtime_set_dai_fmt(rtd, in_data->fmt);
-}
-
 static const struct snd_soc_dai_ops g12a_tohdmitx_input_ops = {
-	.hw_params	= g12a_tohdmitx_input_hw_params,
-	.set_fmt	= g12a_tohdmitx_input_set_fmt,
+	.hw_params	= meson_codec_glue_input_hw_params,
+	.set_fmt	= meson_codec_glue_input_set_fmt,
 };
 
 static const struct snd_soc_dai_ops g12a_tohdmitx_output_ops = {
-	.startup	= g12a_tohdmitx_output_startup,
+	.startup	= meson_codec_glue_output_startup,
 };
 
 #define TOHDMITX_SPDIF_FORMATS					\
@@ -305,8 +172,8 @@ static const struct snd_soc_dai_ops g12a_tohdmitx_output_ops = {
 	.id = (xid),							\
 	.playback = TOHDMITX_STREAM(xname, "Playback", xfmt, xchmax),	\
 	.ops = &g12a_tohdmitx_input_ops,				\
-	.probe = g12a_tohdmitx_input_probe,				\
-	.remove = g12a_tohdmitx_input_remove,				\
+	.probe = meson_codec_glue_input_dai_probe,			\
+	.remove = meson_codec_glue_input_dai_remove,			\
 }
 
 #define TOHDMITX_OUT(xname, xid, xfmt, xchmax) {			\
diff --git a/sound/soc/meson/gx-card.c b/sound/soc/meson/gx-card.c
new file mode 100644
index 0000000..7b01dcb
--- /dev/null
+++ b/sound/soc/meson/gx-card.c
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (c) 2020 BayLibre, SAS.
+// Author: Jerome Brunet <jbrunet@baylibre.com>
+
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <sound/soc.h>
+#include <sound/soc-dai.h>
+
+#include "meson-card.h"
+
+struct gx_dai_link_i2s_data {
+	unsigned int mclk_fs;
+};
+
+/*
+ * Base params for the codec to codec links
+ * Those will be over-written by the CPU side of the link
+ */
+static const struct snd_soc_pcm_stream codec_params = {
+	.formats = SNDRV_PCM_FMTBIT_S24_LE,
+	.rate_min = 5525,
+	.rate_max = 192000,
+	.channels_min = 1,
+	.channels_max = 8,
+};
+
+static int gx_card_i2s_be_hw_params(struct snd_pcm_substream *substream,
+				    struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct meson_card *priv = snd_soc_card_get_drvdata(rtd->card);
+	struct gx_dai_link_i2s_data *be =
+		(struct gx_dai_link_i2s_data *)priv->link_data[rtd->num];
+
+	return meson_card_i2s_set_sysclk(substream, params, be->mclk_fs);
+}
+
+static const struct snd_soc_ops gx_card_i2s_be_ops = {
+	.hw_params = gx_card_i2s_be_hw_params,
+};
+
+static int gx_card_parse_i2s(struct snd_soc_card *card,
+			     struct device_node *node,
+			     int *index)
+{
+	struct meson_card *priv = snd_soc_card_get_drvdata(card);
+	struct snd_soc_dai_link *link = &card->dai_link[*index];
+	struct gx_dai_link_i2s_data *be;
+
+	/* Allocate i2s link parameters */
+	be = devm_kzalloc(card->dev, sizeof(*be), GFP_KERNEL);
+	if (!be)
+		return -ENOMEM;
+	priv->link_data[*index] = be;
+
+	/* Setup i2s link */
+	link->ops = &gx_card_i2s_be_ops;
+	link->dai_fmt = meson_card_parse_daifmt(node, link->cpus->of_node);
+
+	of_property_read_u32(node, "mclk-fs", &be->mclk_fs);
+
+	return 0;
+}
+
+static int gx_card_cpu_identify(struct snd_soc_dai_link_component *c,
+				char *match)
+{
+	if (of_device_is_compatible(c->of_node, DT_PREFIX "aiu")) {
+		if (strstr(c->dai_name, match))
+			return 1;
+	}
+
+	/* dai not matched */
+	return 0;
+}
+
+static int gx_card_add_link(struct snd_soc_card *card, struct device_node *np,
+			    int *index)
+{
+	struct snd_soc_dai_link *dai_link = &card->dai_link[*index];
+	struct snd_soc_dai_link_component *cpu;
+	int ret;
+
+	cpu = devm_kzalloc(card->dev, sizeof(*cpu), GFP_KERNEL);
+	if (!cpu)
+		return -ENOMEM;
+
+	dai_link->cpus = cpu;
+	dai_link->num_cpus = 1;
+
+	ret = meson_card_parse_dai(card, np, &dai_link->cpus->of_node,
+				   &dai_link->cpus->dai_name);
+	if (ret)
+		return ret;
+
+	if (gx_card_cpu_identify(dai_link->cpus, "FIFO"))
+		ret = meson_card_set_fe_link(card, dai_link, np, true);
+	else
+		ret = meson_card_set_be_link(card, dai_link, np);
+
+	if (ret)
+		return ret;
+
+	/* Check if the cpu is the i2s encoder and parse i2s data */
+	if (gx_card_cpu_identify(dai_link->cpus, "I2S Encoder"))
+		ret = gx_card_parse_i2s(card, np, index);
+
+	/* Or apply codec to codec params if necessary */
+	else if (gx_card_cpu_identify(dai_link->cpus, "CODEC CTRL"))
+		dai_link->params = &codec_params;
+
+	return ret;
+}
+
+static const struct meson_card_match_data gx_card_match_data = {
+	.add_link = gx_card_add_link,
+};
+
+static const struct of_device_id gx_card_of_match[] = {
+	{
+		.compatible = "amlogic,gx-sound-card",
+		.data = &gx_card_match_data,
+	}, {}
+};
+MODULE_DEVICE_TABLE(of, gx_card_of_match);
+
+static struct platform_driver gx_card_pdrv = {
+	.probe = meson_card_probe,
+	.remove = meson_card_remove,
+	.driver = {
+		.name = "gx-sound-card",
+		.of_match_table = gx_card_of_match,
+	},
+};
+module_platform_driver(gx_card_pdrv);
+
+MODULE_DESCRIPTION("Amlogic GX ALSA machine driver");
+MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/sound/soc/meson/meson-card-utils.c b/sound/soc/meson/meson-card-utils.c
new file mode 100644
index 0000000..2ca8c98
--- /dev/null
+++ b/sound/soc/meson/meson-card-utils.c
@@ -0,0 +1,385 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2020 BayLibre, SAS.
+// Author: Jerome Brunet <jbrunet@baylibre.com>
+
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <sound/soc.h>
+
+#include "meson-card.h"
+
+int meson_card_i2s_set_sysclk(struct snd_pcm_substream *substream,
+			      struct snd_pcm_hw_params *params,
+			      unsigned int mclk_fs)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai;
+	unsigned int mclk;
+	int ret, i;
+
+	if (!mclk_fs)
+		return 0;
+
+	mclk = params_rate(params) * mclk_fs;
+
+	for_each_rtd_codec_dais(rtd, i, codec_dai) {
+		ret = snd_soc_dai_set_sysclk(codec_dai, 0, mclk,
+					     SND_SOC_CLOCK_IN);
+		if (ret && ret != -ENOTSUPP)
+			return ret;
+	}
+
+	ret = snd_soc_dai_set_sysclk(asoc_rtd_to_cpu(rtd, 0), 0, mclk,
+				     SND_SOC_CLOCK_OUT);
+	if (ret && ret != -ENOTSUPP)
+		return ret;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(meson_card_i2s_set_sysclk);
+
+int meson_card_reallocate_links(struct snd_soc_card *card,
+				unsigned int num_links)
+{
+	struct meson_card *priv = snd_soc_card_get_drvdata(card);
+	struct snd_soc_dai_link *links;
+	void **ldata;
+
+	links = krealloc(priv->card.dai_link,
+			 num_links * sizeof(*priv->card.dai_link),
+			 GFP_KERNEL | __GFP_ZERO);
+	ldata = krealloc(priv->link_data,
+			 num_links * sizeof(*priv->link_data),
+			 GFP_KERNEL | __GFP_ZERO);
+
+	if (!links || !ldata) {
+		dev_err(priv->card.dev, "failed to allocate links\n");
+		return -ENOMEM;
+	}
+
+	priv->card.dai_link = links;
+	priv->link_data = ldata;
+	priv->card.num_links = num_links;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(meson_card_reallocate_links);
+
+int meson_card_parse_dai(struct snd_soc_card *card,
+			 struct device_node *node,
+			 struct device_node **dai_of_node,
+			 const char **dai_name)
+{
+	struct of_phandle_args args;
+	int ret;
+
+	if (!dai_name || !dai_of_node || !node)
+		return -EINVAL;
+
+	ret = of_parse_phandle_with_args(node, "sound-dai",
+					 "#sound-dai-cells", 0, &args);
+	if (ret) {
+		if (ret != -EPROBE_DEFER)
+			dev_err(card->dev, "can't parse dai %d\n", ret);
+		return ret;
+	}
+	*dai_of_node = args.np;
+
+	return snd_soc_get_dai_name(&args, dai_name);
+}
+EXPORT_SYMBOL_GPL(meson_card_parse_dai);
+
+static int meson_card_set_link_name(struct snd_soc_card *card,
+				    struct snd_soc_dai_link *link,
+				    struct device_node *node,
+				    const char *prefix)
+{
+	char *name = devm_kasprintf(card->dev, GFP_KERNEL, "%s.%s",
+				    prefix, node->full_name);
+	if (!name)
+		return -ENOMEM;
+
+	link->name = name;
+	link->stream_name = name;
+
+	return 0;
+}
+
+unsigned int meson_card_parse_daifmt(struct device_node *node,
+				     struct device_node *cpu_node)
+{
+	struct device_node *bitclkmaster = NULL;
+	struct device_node *framemaster = NULL;
+	unsigned int daifmt;
+
+	daifmt = snd_soc_of_parse_daifmt(node, DT_PREFIX,
+					 &bitclkmaster, &framemaster);
+	daifmt &= ~SND_SOC_DAIFMT_MASTER_MASK;
+
+	/* If no master is provided, default to cpu master */
+	if (!bitclkmaster || bitclkmaster == cpu_node) {
+		daifmt |= (!framemaster || framemaster == cpu_node) ?
+			SND_SOC_DAIFMT_CBS_CFS : SND_SOC_DAIFMT_CBS_CFM;
+	} else {
+		daifmt |= (!framemaster || framemaster == cpu_node) ?
+			SND_SOC_DAIFMT_CBM_CFS : SND_SOC_DAIFMT_CBM_CFM;
+	}
+
+	of_node_put(bitclkmaster);
+	of_node_put(framemaster);
+
+	return daifmt;
+}
+EXPORT_SYMBOL_GPL(meson_card_parse_daifmt);
+
+int meson_card_set_be_link(struct snd_soc_card *card,
+			   struct snd_soc_dai_link *link,
+			   struct device_node *node)
+{
+	struct snd_soc_dai_link_component *codec;
+	struct device_node *np;
+	int ret, num_codecs;
+
+	link->no_pcm = 1;
+	link->dpcm_playback = 1;
+	link->dpcm_capture = 1;
+
+	num_codecs = of_get_child_count(node);
+	if (!num_codecs) {
+		dev_err(card->dev, "be link %s has no codec\n",
+			node->full_name);
+		return -EINVAL;
+	}
+
+	codec = devm_kcalloc(card->dev, num_codecs, sizeof(*codec), GFP_KERNEL);
+	if (!codec)
+		return -ENOMEM;
+
+	link->codecs = codec;
+	link->num_codecs = num_codecs;
+
+	for_each_child_of_node(node, np) {
+		ret = meson_card_parse_dai(card, np, &codec->of_node,
+					   &codec->dai_name);
+		if (ret) {
+			of_node_put(np);
+			return ret;
+		}
+
+		codec++;
+	}
+
+	ret = meson_card_set_link_name(card, link, node, "be");
+	if (ret)
+		dev_err(card->dev, "error setting %pOFn link name\n", np);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(meson_card_set_be_link);
+
+int meson_card_set_fe_link(struct snd_soc_card *card,
+			   struct snd_soc_dai_link *link,
+			   struct device_node *node,
+			   bool is_playback)
+{
+	struct snd_soc_dai_link_component *codec;
+
+	codec = devm_kzalloc(card->dev, sizeof(*codec), GFP_KERNEL);
+	if (!codec)
+		return -ENOMEM;
+
+	link->codecs = codec;
+	link->num_codecs = 1;
+
+	link->dynamic = 1;
+	link->dpcm_merged_format = 1;
+	link->dpcm_merged_chan = 1;
+	link->dpcm_merged_rate = 1;
+	link->codecs->dai_name = "snd-soc-dummy-dai";
+	link->codecs->name = "snd-soc-dummy";
+
+	if (is_playback)
+		link->dpcm_playback = 1;
+	else
+		link->dpcm_capture = 1;
+
+	return meson_card_set_link_name(card, link, node, "fe");
+}
+EXPORT_SYMBOL_GPL(meson_card_set_fe_link);
+
+static int meson_card_add_links(struct snd_soc_card *card)
+{
+	struct meson_card *priv = snd_soc_card_get_drvdata(card);
+	struct device_node *node = card->dev->of_node;
+	struct device_node *np;
+	int num, i, ret;
+
+	num = of_get_child_count(node);
+	if (!num) {
+		dev_err(card->dev, "card has no links\n");
+		return -EINVAL;
+	}
+
+	ret = meson_card_reallocate_links(card, num);
+	if (ret)
+		return ret;
+
+	i = 0;
+	for_each_child_of_node(node, np) {
+		ret = priv->match_data->add_link(card, np, &i);
+		if (ret) {
+			of_node_put(np);
+			return ret;
+		}
+
+		i++;
+	}
+
+	return 0;
+}
+
+static int meson_card_parse_of_optional(struct snd_soc_card *card,
+					const char *propname,
+					int (*func)(struct snd_soc_card *c,
+						    const char *p))
+{
+	/* If property is not provided, don't fail ... */
+	if (!of_property_read_bool(card->dev->of_node, propname))
+		return 0;
+
+	/* ... but do fail if it is provided and the parsing fails */
+	return func(card, propname);
+}
+
+static int meson_card_add_aux_devices(struct snd_soc_card *card)
+{
+	struct device_node *node = card->dev->of_node;
+	struct snd_soc_aux_dev *aux;
+	int num, i;
+
+	num = of_count_phandle_with_args(node, "audio-aux-devs", NULL);
+	if (num == -ENOENT) {
+		return 0;
+	} else if (num < 0) {
+		dev_err(card->dev, "error getting auxiliary devices: %d\n",
+			num);
+		return num;
+	}
+
+	aux = devm_kcalloc(card->dev, num, sizeof(*aux), GFP_KERNEL);
+	if (!aux)
+		return -ENOMEM;
+	card->aux_dev = aux;
+	card->num_aux_devs = num;
+
+	for_each_card_pre_auxs(card, i, aux) {
+		aux->dlc.of_node =
+			of_parse_phandle(node, "audio-aux-devs", i);
+		if (!aux->dlc.of_node)
+			return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void meson_card_clean_references(struct meson_card *priv)
+{
+	struct snd_soc_card *card = &priv->card;
+	struct snd_soc_dai_link *link;
+	struct snd_soc_dai_link_component *codec;
+	struct snd_soc_aux_dev *aux;
+	int i, j;
+
+	if (card->dai_link) {
+		for_each_card_prelinks(card, i, link) {
+			if (link->cpus)
+				of_node_put(link->cpus->of_node);
+			for_each_link_codecs(link, j, codec)
+				of_node_put(codec->of_node);
+		}
+	}
+
+	if (card->aux_dev) {
+		for_each_card_pre_auxs(card, i, aux)
+			of_node_put(aux->dlc.of_node);
+	}
+
+	kfree(card->dai_link);
+	kfree(priv->link_data);
+}
+
+int meson_card_probe(struct platform_device *pdev)
+{
+	const struct meson_card_match_data *data;
+	struct device *dev = &pdev->dev;
+	struct meson_card *priv;
+	int ret;
+
+	data = of_device_get_match_data(dev);
+	if (!data) {
+		dev_err(dev, "failed to match device\n");
+		return -ENODEV;
+	}
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, priv);
+	snd_soc_card_set_drvdata(&priv->card, priv);
+
+	priv->card.owner = THIS_MODULE;
+	priv->card.dev = dev;
+	priv->match_data = data;
+
+	ret = snd_soc_of_parse_card_name(&priv->card, "model");
+	if (ret < 0)
+		return ret;
+
+	ret = meson_card_parse_of_optional(&priv->card, "audio-routing",
+					   snd_soc_of_parse_audio_routing);
+	if (ret) {
+		dev_err(dev, "error while parsing routing\n");
+		return ret;
+	}
+
+	ret = meson_card_parse_of_optional(&priv->card, "audio-widgets",
+					   snd_soc_of_parse_audio_simple_widgets);
+	if (ret) {
+		dev_err(dev, "error while parsing widgets\n");
+		return ret;
+	}
+
+	ret = meson_card_add_links(&priv->card);
+	if (ret)
+		goto out_err;
+
+	ret = meson_card_add_aux_devices(&priv->card);
+	if (ret)
+		goto out_err;
+
+	ret = devm_snd_soc_register_card(dev, &priv->card);
+	if (ret)
+		goto out_err;
+
+	return 0;
+
+out_err:
+	meson_card_clean_references(priv);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(meson_card_probe);
+
+int meson_card_remove(struct platform_device *pdev)
+{
+	struct meson_card *priv = platform_get_drvdata(pdev);
+
+	meson_card_clean_references(priv);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(meson_card_remove);
+
+MODULE_DESCRIPTION("Amlogic Sound Card Utils");
+MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/sound/soc/meson/meson-card.h b/sound/soc/meson/meson-card.h
new file mode 100644
index 0000000..7431407
--- /dev/null
+++ b/sound/soc/meson/meson-card.h
@@ -0,0 +1,55 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2020 BayLibre, SAS.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+#ifndef _MESON_SND_CARD_H
+#define _MESON_SND_CARD_H
+
+struct device_node;
+struct platform_device;
+
+struct snd_soc_card;
+struct snd_pcm_substream;
+struct snd_pcm_hw_params;
+
+#define DT_PREFIX "amlogic,"
+
+struct meson_card_match_data {
+	int (*add_link)(struct snd_soc_card *card,
+			struct device_node *node,
+			int *index);
+};
+
+struct meson_card {
+	const struct meson_card_match_data *match_data;
+	struct snd_soc_card card;
+	void **link_data;
+};
+
+unsigned int meson_card_parse_daifmt(struct device_node *node,
+				     struct device_node *cpu_node);
+
+int meson_card_i2s_set_sysclk(struct snd_pcm_substream *substream,
+			      struct snd_pcm_hw_params *params,
+			      unsigned int mclk_fs);
+
+int meson_card_reallocate_links(struct snd_soc_card *card,
+				unsigned int num_links);
+int meson_card_parse_dai(struct snd_soc_card *card,
+			 struct device_node *node,
+			 struct device_node **dai_of_node,
+			 const char **dai_name);
+int meson_card_set_be_link(struct snd_soc_card *card,
+			   struct snd_soc_dai_link *link,
+			   struct device_node *node);
+int meson_card_set_fe_link(struct snd_soc_card *card,
+			   struct snd_soc_dai_link *link,
+			   struct device_node *node,
+			   bool is_playback);
+
+int meson_card_probe(struct platform_device *pdev);
+int meson_card_remove(struct platform_device *pdev);
+
+#endif /* _MESON_SND_CARD_H */
diff --git a/sound/soc/meson/meson-codec-glue.c b/sound/soc/meson/meson-codec-glue.c
new file mode 100644
index 0000000..524a334
--- /dev/null
+++ b/sound/soc/meson/meson-codec-glue.c
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2019 BayLibre, SAS.
+// Author: Jerome Brunet <jbrunet@baylibre.com>
+
+#include <linux/module.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dai.h>
+
+#include "meson-codec-glue.h"
+
+static struct snd_soc_dapm_widget *
+meson_codec_glue_get_input(struct snd_soc_dapm_widget *w)
+{
+	struct snd_soc_dapm_path *p = NULL;
+	struct snd_soc_dapm_widget *in;
+
+	snd_soc_dapm_widget_for_each_source_path(w, p) {
+		if (!p->connect)
+			continue;
+
+		/* Check that we still are in the same component */
+		if (snd_soc_dapm_to_component(w->dapm) !=
+		    snd_soc_dapm_to_component(p->source->dapm))
+			continue;
+
+		if (p->source->id == snd_soc_dapm_dai_in)
+			return p->source;
+
+		in = meson_codec_glue_get_input(p->source);
+		if (in)
+			return in;
+	}
+
+	return NULL;
+}
+
+static void meson_codec_glue_input_set_data(struct snd_soc_dai *dai,
+					    struct meson_codec_glue_input *data)
+{
+	dai->playback_dma_data = data;
+}
+
+struct meson_codec_glue_input *
+meson_codec_glue_input_get_data(struct snd_soc_dai *dai)
+{
+	return dai->playback_dma_data;
+}
+EXPORT_SYMBOL_GPL(meson_codec_glue_input_get_data);
+
+static struct meson_codec_glue_input *
+meson_codec_glue_output_get_input_data(struct snd_soc_dapm_widget *w)
+{
+	struct snd_soc_dapm_widget *in =
+		meson_codec_glue_get_input(w);
+	struct snd_soc_dai *dai;
+
+	if (WARN_ON(!in))
+		return NULL;
+
+	dai = in->priv;
+
+	return meson_codec_glue_input_get_data(dai);
+}
+
+int meson_codec_glue_input_hw_params(struct snd_pcm_substream *substream,
+				     struct snd_pcm_hw_params *params,
+				     struct snd_soc_dai *dai)
+{
+	struct meson_codec_glue_input *data =
+		meson_codec_glue_input_get_data(dai);
+
+	data->params.rates = snd_pcm_rate_to_rate_bit(params_rate(params));
+	data->params.rate_min = params_rate(params);
+	data->params.rate_max = params_rate(params);
+	data->params.formats = 1ULL << (__force int) params_format(params);
+	data->params.channels_min = params_channels(params);
+	data->params.channels_max = params_channels(params);
+	data->params.sig_bits = dai->driver->playback.sig_bits;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(meson_codec_glue_input_hw_params);
+
+int meson_codec_glue_input_set_fmt(struct snd_soc_dai *dai,
+				   unsigned int fmt)
+{
+	struct meson_codec_glue_input *data =
+		meson_codec_glue_input_get_data(dai);
+
+	/* Save the source stream format for the downstream link */
+	data->fmt = fmt;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(meson_codec_glue_input_set_fmt);
+
+int meson_codec_glue_output_startup(struct snd_pcm_substream *substream,
+				    struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct meson_codec_glue_input *in_data =
+		meson_codec_glue_output_get_input_data(dai->capture_widget);
+
+	if (!in_data)
+		return -ENODEV;
+
+	if (WARN_ON(!rtd->dai_link->params)) {
+		dev_warn(dai->dev, "codec2codec link expected\n");
+		return -EINVAL;
+	}
+
+	/* Replace link params with the input params */
+	rtd->dai_link->params = &in_data->params;
+
+	if (!in_data->fmt)
+		return 0;
+
+	return snd_soc_runtime_set_dai_fmt(rtd, in_data->fmt);
+}
+EXPORT_SYMBOL_GPL(meson_codec_glue_output_startup);
+
+int meson_codec_glue_input_dai_probe(struct snd_soc_dai *dai)
+{
+	struct meson_codec_glue_input *data;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	meson_codec_glue_input_set_data(dai, data);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(meson_codec_glue_input_dai_probe);
+
+int meson_codec_glue_input_dai_remove(struct snd_soc_dai *dai)
+{
+	struct meson_codec_glue_input *data =
+		meson_codec_glue_input_get_data(dai);
+
+	kfree(data);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(meson_codec_glue_input_dai_remove);
+
+MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>");
+MODULE_DESCRIPTION("Amlogic Codec Glue Helpers");
+MODULE_LICENSE("GPL v2");
+
diff --git a/sound/soc/meson/meson-codec-glue.h b/sound/soc/meson/meson-codec-glue.h
new file mode 100644
index 0000000..07f9944
--- /dev/null
+++ b/sound/soc/meson/meson-codec-glue.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (c) 2018 Baylibre SAS.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+#ifndef _MESON_CODEC_GLUE_H
+#define _MESON_CODEC_GLUE_H
+
+#include <sound/soc.h>
+
+struct meson_codec_glue_input {
+	struct snd_soc_pcm_stream params;
+	unsigned int fmt;
+};
+
+/* Input helpers */
+struct meson_codec_glue_input *
+meson_codec_glue_input_get_data(struct snd_soc_dai *dai);
+int meson_codec_glue_input_hw_params(struct snd_pcm_substream *substream,
+				     struct snd_pcm_hw_params *params,
+				     struct snd_soc_dai *dai);
+int meson_codec_glue_input_set_fmt(struct snd_soc_dai *dai,
+				   unsigned int fmt);
+int meson_codec_glue_input_dai_probe(struct snd_soc_dai *dai);
+int meson_codec_glue_input_dai_remove(struct snd_soc_dai *dai);
+
+/* Output helpers */
+int meson_codec_glue_output_startup(struct snd_pcm_substream *substream,
+				    struct snd_soc_dai *dai);
+
+#endif /* _MESON_CODEC_GLUE_H */
diff --git a/sound/soc/meson/t9015.c b/sound/soc/meson/t9015.c
new file mode 100644
index 0000000..56d2592
--- /dev/null
+++ b/sound/soc/meson/t9015.c
@@ -0,0 +1,333 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2020 BayLibre, SAS.
+// Author: Jerome Brunet <jbrunet@baylibre.com>
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+#include <sound/soc.h>
+#include <sound/tlv.h>
+
+#define BLOCK_EN	0x00
+#define  LORN_EN	0
+#define  LORP_EN	1
+#define  LOLN_EN	2
+#define  LOLP_EN	3
+#define  DACR_EN	4
+#define  DACL_EN	5
+#define  DACR_INV	20
+#define  DACL_INV	21
+#define  DACR_SRC	22
+#define  DACL_SRC	23
+#define  REFP_BUF_EN	BIT(12)
+#define  BIAS_CURRENT_EN BIT(13)
+#define  VMID_GEN_FAST	BIT(14)
+#define  VMID_GEN_EN	BIT(15)
+#define  I2S_MODE	BIT(30)
+#define VOL_CTRL0	0x04
+#define  GAIN_H		31
+#define  GAIN_L		23
+#define VOL_CTRL1	0x08
+#define  DAC_MONO	8
+#define  RAMP_RATE	10
+#define  VC_RAMP_MODE	12
+#define  MUTE_MODE	13
+#define  UNMUTE_MODE	14
+#define  DAC_SOFT_MUTE	15
+#define  DACR_VC	16
+#define  DACL_VC	24
+#define LINEOUT_CFG	0x0c
+#define  LORN_POL	0
+#define  LORP_POL	4
+#define  LOLN_POL	8
+#define  LOLP_POL	12
+#define POWER_CFG	0x10
+
+struct t9015 {
+	struct clk *pclk;
+	struct regulator *avdd;
+};
+
+static int t9015_dai_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
+{
+	struct snd_soc_component *component = dai->component;
+	unsigned int val;
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBM_CFM:
+		val = I2S_MODE;
+		break;
+
+	case SND_SOC_DAIFMT_CBS_CFS:
+		val = 0;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	snd_soc_component_update_bits(component, BLOCK_EN, I2S_MODE, val);
+
+	if (((fmt & SND_SOC_DAIFMT_FORMAT_MASK) != SND_SOC_DAIFMT_I2S) &&
+	    ((fmt & SND_SOC_DAIFMT_FORMAT_MASK) != SND_SOC_DAIFMT_LEFT_J))
+		return -EINVAL;
+
+	return 0;
+}
+
+static const struct snd_soc_dai_ops t9015_dai_ops = {
+	.set_fmt = t9015_dai_set_fmt,
+};
+
+static struct snd_soc_dai_driver t9015_dai = {
+	.name = "t9015-hifi",
+	.playback = {
+		.stream_name = "Playback",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = SNDRV_PCM_RATE_8000_96000,
+		.formats = (SNDRV_PCM_FMTBIT_S8 |
+			    SNDRV_PCM_FMTBIT_S16_LE |
+			    SNDRV_PCM_FMTBIT_S20_LE |
+			    SNDRV_PCM_FMTBIT_S24_LE),
+	},
+	.ops = &t9015_dai_ops,
+};
+
+static const DECLARE_TLV_DB_MINMAX_MUTE(dac_vol_tlv, -9525, 0);
+
+static const char * const ramp_rate_txt[] = { "Fast", "Slow" };
+static SOC_ENUM_SINGLE_DECL(ramp_rate_enum, VOL_CTRL1, RAMP_RATE,
+			    ramp_rate_txt);
+
+static const char * const dacr_in_txt[] = { "Right", "Left" };
+static SOC_ENUM_SINGLE_DECL(dacr_in_enum, BLOCK_EN, DACR_SRC, dacr_in_txt);
+
+static const char * const dacl_in_txt[] = { "Left", "Right" };
+static SOC_ENUM_SINGLE_DECL(dacl_in_enum, BLOCK_EN, DACL_SRC, dacl_in_txt);
+
+static const char * const mono_txt[] = { "Stereo", "Mono"};
+static SOC_ENUM_SINGLE_DECL(mono_enum, VOL_CTRL1, DAC_MONO, mono_txt);
+
+static const struct snd_kcontrol_new t9015_snd_controls[] = {
+	/* Volume Controls */
+	SOC_ENUM("Playback Channel Mode", mono_enum),
+	SOC_SINGLE("Playback Switch", VOL_CTRL1, DAC_SOFT_MUTE, 1, 1),
+	SOC_DOUBLE_TLV("Playback Volume", VOL_CTRL1, DACL_VC, DACR_VC,
+		       0xff, 0, dac_vol_tlv),
+
+	/* Ramp Controls */
+	SOC_ENUM("Ramp Rate", ramp_rate_enum),
+	SOC_SINGLE("Volume Ramp Switch", VOL_CTRL1, VC_RAMP_MODE, 1, 0),
+	SOC_SINGLE("Mute Ramp Switch", VOL_CTRL1, MUTE_MODE, 1, 0),
+	SOC_SINGLE("Unmute Ramp Switch", VOL_CTRL1, UNMUTE_MODE, 1, 0),
+};
+
+static const struct snd_kcontrol_new t9015_right_dac_mux =
+	SOC_DAPM_ENUM("Right DAC Source", dacr_in_enum);
+static const struct snd_kcontrol_new t9015_left_dac_mux =
+	SOC_DAPM_ENUM("Left DAC Source", dacl_in_enum);
+
+static const struct snd_soc_dapm_widget t9015_dapm_widgets[] = {
+	SND_SOC_DAPM_AIF_IN("Right IN", NULL, 0, SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_AIF_IN("Left IN", NULL, 0, SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_MUX("Right DAC Sel", SND_SOC_NOPM, 0, 0,
+			 &t9015_right_dac_mux),
+	SND_SOC_DAPM_MUX("Left DAC Sel", SND_SOC_NOPM, 0, 0,
+			 &t9015_left_dac_mux),
+	SND_SOC_DAPM_DAC("Right DAC", NULL, BLOCK_EN, DACR_EN, 0),
+	SND_SOC_DAPM_DAC("Left DAC",  NULL, BLOCK_EN, DACL_EN, 0),
+	SND_SOC_DAPM_OUT_DRV("Right- Driver", BLOCK_EN, LORN_EN, 0,
+			 NULL, 0),
+	SND_SOC_DAPM_OUT_DRV("Right+ Driver", BLOCK_EN, LORP_EN, 0,
+			 NULL, 0),
+	SND_SOC_DAPM_OUT_DRV("Left- Driver",  BLOCK_EN, LOLN_EN, 0,
+			 NULL, 0),
+	SND_SOC_DAPM_OUT_DRV("Left+ Driver",  BLOCK_EN, LOLP_EN, 0,
+			 NULL, 0),
+	SND_SOC_DAPM_OUTPUT("LORN"),
+	SND_SOC_DAPM_OUTPUT("LORP"),
+	SND_SOC_DAPM_OUTPUT("LOLN"),
+	SND_SOC_DAPM_OUTPUT("LOLP"),
+};
+
+static const struct snd_soc_dapm_route t9015_dapm_routes[] = {
+	{ "Right IN", NULL, "Playback" },
+	{ "Left IN",  NULL, "Playback" },
+	{ "Right DAC Sel", "Right", "Right IN" },
+	{ "Right DAC Sel", "Left",  "Left IN" },
+	{ "Left DAC Sel",  "Right", "Right IN" },
+	{ "Left DAC Sel",  "Left",  "Left IN" },
+	{ "Right DAC", NULL, "Right DAC Sel" },
+	{ "Left DAC",  NULL, "Left DAC Sel" },
+	{ "Right- Driver", NULL, "Right DAC" },
+	{ "Right+ Driver", NULL, "Right DAC" },
+	{ "Left- Driver",  NULL, "Left DAC"  },
+	{ "Left+ Driver",  NULL, "Left DAC"  },
+	{ "LORN", NULL, "Right- Driver", },
+	{ "LORP", NULL, "Right+ Driver", },
+	{ "LOLN", NULL, "Left- Driver",  },
+	{ "LOLP", NULL, "Left+ Driver",  },
+};
+
+static int t9015_set_bias_level(struct snd_soc_component *component,
+				enum snd_soc_bias_level level)
+{
+	struct t9015 *priv = snd_soc_component_get_drvdata(component);
+	enum snd_soc_bias_level now =
+		snd_soc_component_get_bias_level(component);
+	int ret;
+
+	switch (level) {
+	case SND_SOC_BIAS_ON:
+		snd_soc_component_update_bits(component, BLOCK_EN,
+					      BIAS_CURRENT_EN,
+					      BIAS_CURRENT_EN);
+		break;
+	case SND_SOC_BIAS_PREPARE:
+		snd_soc_component_update_bits(component, BLOCK_EN,
+					      BIAS_CURRENT_EN,
+					      0);
+		break;
+	case SND_SOC_BIAS_STANDBY:
+		ret = regulator_enable(priv->avdd);
+		if (ret) {
+			dev_err(component->dev, "AVDD enable failed\n");
+			return ret;
+		}
+
+		if (now == SND_SOC_BIAS_OFF) {
+			snd_soc_component_update_bits(component, BLOCK_EN,
+				VMID_GEN_EN | VMID_GEN_FAST | REFP_BUF_EN,
+				VMID_GEN_EN | VMID_GEN_FAST | REFP_BUF_EN);
+
+			mdelay(200);
+			snd_soc_component_update_bits(component, BLOCK_EN,
+						      VMID_GEN_FAST,
+						      0);
+		}
+
+		break;
+	case SND_SOC_BIAS_OFF:
+		snd_soc_component_update_bits(component, BLOCK_EN,
+			VMID_GEN_EN | VMID_GEN_FAST | REFP_BUF_EN,
+			0);
+
+		regulator_disable(priv->avdd);
+		break;
+	}
+
+	return 0;
+}
+
+static const struct snd_soc_component_driver t9015_codec_driver = {
+	.set_bias_level		= t9015_set_bias_level,
+	.controls		= t9015_snd_controls,
+	.num_controls		= ARRAY_SIZE(t9015_snd_controls),
+	.dapm_widgets		= t9015_dapm_widgets,
+	.num_dapm_widgets	= ARRAY_SIZE(t9015_dapm_widgets),
+	.dapm_routes		= t9015_dapm_routes,
+	.num_dapm_routes	= ARRAY_SIZE(t9015_dapm_routes),
+	.suspend_bias_off	= 1,
+	.endianness		= 1,
+	.non_legacy_dai_naming	= 1,
+};
+
+static const struct regmap_config t9015_regmap_config = {
+	.reg_bits		= 32,
+	.reg_stride		= 4,
+	.val_bits		= 32,
+	.max_register		= POWER_CFG,
+};
+
+static int t9015_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct t9015 *priv;
+	void __iomem *regs;
+	struct regmap *regmap;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	platform_set_drvdata(pdev, priv);
+
+	priv->pclk = devm_clk_get(dev, "pclk");
+	if (IS_ERR(priv->pclk)) {
+		if (PTR_ERR(priv->pclk) != -EPROBE_DEFER)
+			dev_err(dev, "failed to get core clock\n");
+		return PTR_ERR(priv->pclk);
+	}
+
+	priv->avdd = devm_regulator_get(dev, "AVDD");
+	if (IS_ERR(priv->avdd)) {
+		if (PTR_ERR(priv->avdd) != -EPROBE_DEFER)
+			dev_err(dev, "failed to AVDD\n");
+		return PTR_ERR(priv->avdd);
+	}
+
+	ret = clk_prepare_enable(priv->pclk);
+	if (ret) {
+		dev_err(dev, "core clock enable failed\n");
+		return ret;
+	}
+
+	ret = devm_add_action_or_reset(dev,
+			(void(*)(void *))clk_disable_unprepare,
+			priv->pclk);
+	if (ret)
+		return ret;
+
+	ret = device_reset(dev);
+	if (ret) {
+		dev_err(dev, "reset failed\n");
+		return ret;
+	}
+
+	regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(regs)) {
+		dev_err(dev, "register map failed\n");
+		return PTR_ERR(regs);
+	}
+
+	regmap = devm_regmap_init_mmio(dev, regs, &t9015_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(dev, "regmap init failed\n");
+		return PTR_ERR(regmap);
+	}
+
+	/*
+	 * Initialize output polarity:
+	 * ATM the output polarity is fixed but in the future it might useful
+	 * to add DT property to set this depending on the platform needs
+	 */
+	regmap_write(regmap, LINEOUT_CFG, 0x1111);
+
+	return devm_snd_soc_register_component(dev, &t9015_codec_driver,
+					       &t9015_dai, 1);
+}
+
+static const struct of_device_id t9015_ids[] = {
+	{ .compatible = "amlogic,t9015", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, t9015_ids);
+
+static struct platform_driver t9015_driver = {
+	.driver = {
+		.name = "t9015-codec",
+		.of_match_table = of_match_ptr(t9015_ids),
+	},
+	.probe = t9015_probe,
+};
+
+module_platform_driver(t9015_driver);
+
+MODULE_DESCRIPTION("ASoC Amlogic T9015 codec driver");
+MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/mxs/mxs-sgtl5000.c b/sound/soc/mxs/mxs-sgtl5000.c
index 9841e1d..f46d7ac 100644
--- a/sound/soc/mxs/mxs-sgtl5000.c
+++ b/sound/soc/mxs/mxs-sgtl5000.c
@@ -20,8 +20,8 @@ static int mxs_sgtl5000_hw_params(struct snd_pcm_substream *substream,
 	struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	unsigned int rate = params_rate(params);
 	u32 mclk;
 	int ret;
diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig
index 295cfff..d4c0f58 100644
--- a/sound/soc/pxa/Kconfig
+++ b/sound/soc/pxa/Kconfig
@@ -81,6 +81,9 @@
 	depends on SND_PXA2XX_SOC && MACH_TOSA
 	depends on MFD_TC6393XB
 	depends on AC97_BUS=n
+	select REGMAP
+	select AC97_BUS_NEW
+	select AC97_BUS_COMPAT
 	select SND_PXA2XX_SOC_AC97
 	select SND_SOC_WM9712
 	help
@@ -91,6 +94,9 @@
 	tristate "SoC AC97 Audio support for e740"
 	depends on SND_PXA2XX_SOC && MACH_E740
 	depends on AC97_BUS=n
+	select REGMAP
+	select AC97_BUS_NEW
+	select AC97_BUS_COMPAT
 	select SND_SOC_WM9705
 	select SND_PXA2XX_SOC_AC97
 	help
@@ -101,6 +107,7 @@
 	tristate "SoC AC97 Audio support for e750"
 	depends on SND_PXA2XX_SOC && MACH_E750
 	depends on AC97_BUS=n
+	select REGMAP
 	select SND_SOC_WM9705
 	select SND_PXA2XX_SOC_AC97
 	help
@@ -111,7 +118,10 @@
 	tristate "SoC AC97 Audio support for e800"
 	depends on SND_PXA2XX_SOC && MACH_E800
 	depends on AC97_BUS=n
+	select REGMAP
 	select SND_SOC_WM9712
+	select AC97_BUS_NEW
+	select AC97_BUS_COMPAT
 	select SND_PXA2XX_SOC_AC97
 	help
 	  Say Y if you want to add support for SoC audio on the
@@ -122,6 +132,9 @@
 	depends on SND_PXA2XX_SOC && (MACH_EM_X270 || MACH_EXEDA || \
 			MACH_CM_X300)
 	depends on AC97_BUS=n
+	select REGMAP
+	select AC97_BUS_NEW
+	select AC97_BUS_COMPAT
 	select SND_PXA2XX_SOC_AC97
 	select SND_SOC_WM9712
 	help
@@ -133,6 +146,9 @@
 	depends on SND_PXA2XX_SOC && (MACH_PALMLD || MACH_PALMTX || \
 			MACH_PALMT5 || MACH_PALMTE2)
 	depends on AC97_BUS=n
+	select REGMAP
+	select AC97_BUS_NEW
+	select AC97_BUS_COMPAT
 	select SND_PXA2XX_SOC_AC97
 	select SND_SOC_WM9712
 	help
@@ -163,7 +179,10 @@
 	tristate "SoC Audio support for Marvell Zylonite"
 	depends on SND_PXA2XX_SOC && MACH_ZYLONITE
 	depends on AC97_BUS=n
+	select AC97_BUS_NEW
+	select AC97_BUS_COMPAT
 	select SND_PXA2XX_SOC_AC97
+	select REGMAP
 	select SND_PXA_SOC_SSP
 	select SND_SOC_WM9713
 	help
@@ -193,6 +212,9 @@
 	tristate "SoC Audio support for MIO A701"
 	depends on SND_PXA2XX_SOC && MACH_MIOA701
 	depends on AC97_BUS=n
+	select REGMAP
+	select AC97_BUS_NEW
+	select AC97_BUS_COMPAT
 	select SND_PXA2XX_SOC_AC97
 	select SND_SOC_WM9713
 	help
diff --git a/sound/soc/pxa/brownstone.c b/sound/soc/pxa/brownstone.c
index 53b1435..016a911 100644
--- a/sound/soc/pxa/brownstone.c
+++ b/sound/soc/pxa/brownstone.c
@@ -44,8 +44,8 @@ static int brownstone_wm8994_hw_params(struct snd_pcm_substream *substream,
 				       struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	int freq_out, sspa_mclk, sysclk;
 
 	if (params_rate(params) > 11025) {
diff --git a/sound/soc/pxa/corgi.c b/sound/soc/pxa/corgi.c
index d810823..6fbef9a 100644
--- a/sound/soc/pxa/corgi.c
+++ b/sound/soc/pxa/corgi.c
@@ -116,8 +116,8 @@ static int corgi_hw_params(struct snd_pcm_substream *substream,
 	struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	unsigned int clk = 0;
 	int ret = 0;
 
diff --git a/sound/soc/pxa/hx4700.c b/sound/soc/pxa/hx4700.c
index 0139343..b4da9a9 100644
--- a/sound/soc/pxa/hx4700.c
+++ b/sound/soc/pxa/hx4700.c
@@ -54,8 +54,8 @@ static int hx4700_hw_params(struct snd_pcm_substream *substream,
 			    struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	int ret = 0;
 
 	/* set the I2S system clock as output */
diff --git a/sound/soc/pxa/imote2.c b/sound/soc/pxa/imote2.c
index 514e177..3014e82 100644
--- a/sound/soc/pxa/imote2.c
+++ b/sound/soc/pxa/imote2.c
@@ -12,8 +12,8 @@ static int imote2_asoc_hw_params(struct snd_pcm_substream *substream,
 				 struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	unsigned int clk = 0;
 	int ret;
 
diff --git a/sound/soc/pxa/magician.c b/sound/soc/pxa/magician.c
index 6483cff..e4c818f 100644
--- a/sound/soc/pxa/magician.c
+++ b/sound/soc/pxa/magician.c
@@ -83,8 +83,8 @@ static int magician_playback_hw_params(struct snd_pcm_substream *substream,
 				       struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	unsigned int width;
 	int ret = 0;
 
@@ -121,8 +121,8 @@ static int magician_capture_hw_params(struct snd_pcm_substream *substream,
 				      struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	int ret = 0;
 
 	/* set codec DAI configuration */
@@ -358,10 +358,10 @@ static int __init magician_init(void)
 	adapter = i2c_get_adapter(0);
 	if (!adapter)
 		return -ENODEV;
-	client = i2c_new_device(adapter, i2c_board_info);
+	client = i2c_new_client_device(adapter, i2c_board_info);
 	i2c_put_adapter(adapter);
-	if (!client)
-		return -ENODEV;
+	if (IS_ERR(client))
+		return PTR_ERR(client);
 
 	ret = gpio_request(EGPIO_MAGICIAN_SPK_POWER, "SPK_POWER");
 	if (ret)
diff --git a/sound/soc/pxa/mioa701_wm9713.c b/sound/soc/pxa/mioa701_wm9713.c
index 76e054d..bf27b27 100644
--- a/sound/soc/pxa/mioa701_wm9713.c
+++ b/sound/soc/pxa/mioa701_wm9713.c
@@ -73,7 +73,7 @@ static int rear_amp_event(struct snd_soc_dapm_widget *widget,
 	struct snd_soc_component *component;
 
 	rtd = snd_soc_get_pcm_runtime(card, &card->dai_link[0]);
-	component = rtd->codec_dai->component;
+	component = asoc_rtd_to_codec(rtd, 0)->component;
 	return rear_amp_power(component, SND_SOC_DAPM_EVENT_ON(event));
 }
 
@@ -117,7 +117,7 @@ static const struct snd_soc_dapm_route audio_map[] = {
 
 static int mioa701_wm9713_init(struct snd_soc_pcm_runtime *rtd)
 {
-	struct snd_soc_component *component = rtd->codec_dai->component;
+	struct snd_soc_component *component = asoc_rtd_to_codec(rtd, 0)->component;
 
 	/* Prepare GPIO8 for rear speaker amplifier */
 	snd_soc_component_update_bits(component, AC97_GPIO_CFG, 0x100, 0x100);
diff --git a/sound/soc/pxa/mmp-pcm.c b/sound/soc/pxa/mmp-pcm.c
index 287b5da..3fe6c4c 100644
--- a/sound/soc/pxa/mmp-pcm.c
+++ b/sound/soc/pxa/mmp-pcm.c
@@ -112,7 +112,7 @@ static int mmp_pcm_open(struct snd_soc_component *component,
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct platform_device *pdev = to_platform_device(component->dev);
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	struct mmp_dma_data dma_data;
 	struct resource *r;
 
diff --git a/sound/soc/pxa/mmp-sspa.c b/sound/soc/pxa/mmp-sspa.c
index e701637..3548a26 100644
--- a/sound/soc/pxa/mmp-sspa.c
+++ b/sound/soc/pxa/mmp-sspa.c
@@ -251,7 +251,7 @@ static int mmp_sspa_hw_params(struct snd_pcm_substream *substream,
 			       struct snd_soc_dai *dai)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	struct sspa_priv *sspa_priv = snd_soc_dai_get_drvdata(dai);
 	struct ssp_device *sspa = sspa_priv->sspa;
 	struct snd_dmaengine_dai_dma_data *dma_params;
diff --git a/sound/soc/pxa/poodle.c b/sound/soc/pxa/poodle.c
index 59ef04d..287984a 100644
--- a/sound/soc/pxa/poodle.c
+++ b/sound/soc/pxa/poodle.c
@@ -90,8 +90,8 @@ static int poodle_hw_params(struct snd_pcm_substream *substream,
 	struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	unsigned int clk = 0;
 	int ret = 0;
 
diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c
index 5f1c477..9a32bf7 100644
--- a/sound/soc/pxa/pxa2xx-i2s.c
+++ b/sound/soc/pxa/pxa2xx-i2s.c
@@ -96,7 +96,7 @@ static int pxa2xx_i2s_startup(struct snd_pcm_substream *substream,
 			      struct snd_soc_dai *dai)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 
 	if (IS_ERR(clk_i2s))
 		return PTR_ERR(clk_i2s);
diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c
index f7babff..6d8174f 100644
--- a/sound/soc/pxa/spitz.c
+++ b/sound/soc/pxa/spitz.c
@@ -117,8 +117,8 @@ static int spitz_hw_params(struct snd_pcm_substream *substream,
 	struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	unsigned int clk = 0;
 	int ret = 0;
 
diff --git a/sound/soc/pxa/ttc-dkb.c b/sound/soc/pxa/ttc-dkb.c
index d8f79e2..d5f2961 100644
--- a/sound/soc/pxa/ttc-dkb.c
+++ b/sound/soc/pxa/ttc-dkb.c
@@ -61,7 +61,7 @@ static const struct snd_soc_dapm_route ttc_audio_map[] = {
 
 static int ttc_pm860x_init(struct snd_soc_pcm_runtime *rtd)
 {
-	struct snd_soc_component *component = rtd->codec_dai->component;
+	struct snd_soc_component *component = asoc_rtd_to_codec(rtd, 0)->component;
 
 	/* Headset jack detection */
 	snd_soc_card_jack_new(rtd->card, "Headphone Jack", SND_JACK_HEADPHONE |
diff --git a/sound/soc/pxa/z2.c b/sound/soc/pxa/z2.c
index f9a33cb..6eee1ae 100644
--- a/sound/soc/pxa/z2.c
+++ b/sound/soc/pxa/z2.c
@@ -34,8 +34,8 @@ static int z2_hw_params(struct snd_pcm_substream *substream,
 	struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	unsigned int clk = 0;
 	int ret = 0;
 
diff --git a/sound/soc/pxa/zylonite.c b/sound/soc/pxa/zylonite.c
index 567dc13..447b59b 100644
--- a/sound/soc/pxa/zylonite.c
+++ b/sound/soc/pxa/zylonite.c
@@ -66,7 +66,7 @@ static const struct snd_soc_dapm_route audio_map[] = {
 static int zylonite_wm9713_init(struct snd_soc_pcm_runtime *rtd)
 {
 	if (clk_pout)
-		snd_soc_dai_set_pll(rtd->codec_dai, 0, 0,
+		snd_soc_dai_set_pll(asoc_rtd_to_codec(rtd, 0), 0, 0,
 				    clk_get_rate(pout), 0);
 
 	return 0;
@@ -76,8 +76,8 @@ static int zylonite_voice_hw_params(struct snd_pcm_substream *substream,
 				    struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	unsigned int wm9713_div = 0;
 	int ret = 0;
 	int rate = params_rate(params);
diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig
index 6530d24..f51b28d 100644
--- a/sound/soc/qcom/Kconfig
+++ b/sound/soc/qcom/Kconfig
@@ -99,7 +99,7 @@
 
 config SND_SOC_SDM845
 	tristate "SoC Machine driver for SDM845 boards"
-	depends on QCOM_APR && CROS_EC && I2C
+	depends on QCOM_APR && CROS_EC && I2C && SOUNDWIRE
 	select SND_SOC_QDSP6
 	select SND_SOC_QCOM_COMMON
 	select SND_SOC_RT5663
diff --git a/sound/soc/qcom/apq8016_sbc.c b/sound/soc/qcom/apq8016_sbc.c
index ac75838..2ef090f 100644
--- a/sound/soc/qcom/apq8016_sbc.c
+++ b/sound/soc/qcom/apq8016_sbc.c
@@ -33,9 +33,9 @@ struct apq8016_sbc_data {
 
 static int apq8016_sbc_dai_init(struct snd_soc_pcm_runtime *rtd)
 {
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+	struct snd_soc_dai *codec_dai;
 	struct snd_soc_component *component;
-	struct snd_soc_dai_link *dai_link = rtd->dai_link;
 	struct snd_soc_card *card = rtd->card;
 	struct apq8016_sbc_data *pdata = snd_soc_card_get_drvdata(card);
 	int i, rval;
@@ -90,10 +90,9 @@ static int apq8016_sbc_dai_init(struct snd_soc_pcm_runtime *rtd)
 		pdata->jack_setup = true;
 	}
 
-	for (i = 0 ; i < dai_link->num_codecs; i++) {
-		struct snd_soc_dai *dai = rtd->codec_dais[i];
+	for_each_rtd_codec_dais(rtd, i, codec_dai) {
 
-		component = dai->component;
+		component = codec_dai->component;
 		/* Set default mclk for internal codec */
 		rval = snd_soc_component_set_sysclk(component, 0, 0, DEFAULT_MCLK_RATE,
 				       SND_SOC_CLOCK_IN);
diff --git a/sound/soc/qcom/apq8096.c b/sound/soc/qcom/apq8096.c
index 94363fd..d55e3ad 100644
--- a/sound/soc/qcom/apq8096.c
+++ b/sound/soc/qcom/apq8096.c
@@ -31,8 +31,8 @@ static int msm_snd_hw_params(struct snd_pcm_substream *substream,
 			     struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	u32 rx_ch[SLIM_MAX_RX_PORTS], tx_ch[SLIM_MAX_TX_PORTS];
 	u32 rx_ch_cnt = 0, tx_ch_cnt = 0;
 	int ret = 0;
@@ -66,7 +66,7 @@ static struct snd_soc_ops apq8096_ops = {
 
 static int apq8096_init(struct snd_soc_pcm_runtime *rtd)
 {
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 
 	/*
 	 * Codec SLIMBUS configuration
diff --git a/sound/soc/qcom/lpass-platform.c b/sound/soc/qcom/lpass-platform.c
index b05091c..34f7fd1 100644
--- a/sound/soc/qcom/lpass-platform.c
+++ b/sound/soc/qcom/lpass-platform.c
@@ -55,7 +55,7 @@ static int lpass_platform_pcmops_open(struct snd_soc_component *component,
 {
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
-	struct snd_soc_dai *cpu_dai = soc_runtime->cpu_dai;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(soc_runtime, 0);
 	struct lpass_data *drvdata = snd_soc_component_get_drvdata(component);
 	struct lpass_variant *v = drvdata->variant;
 	int ret, dma_ch, dir = substream->stream;
@@ -529,7 +529,7 @@ static void lpass_platform_pcm_free(struct snd_soc_component *component,
 	struct snd_pcm_substream *substream;
 	int i;
 
-	for (i = 0; i < ARRAY_SIZE(pcm->streams); i++) {
+	for_each_pcm_streams(i) {
 		substream = pcm->streams[i].substream;
 		if (substream) {
 			snd_dma_free_pages(&substream->dma_buffer);
diff --git a/sound/soc/qcom/qdsp6/q6asm-dai.c b/sound/soc/qcom/qdsp6/q6asm-dai.c
index c0d422d..125af00 100644
--- a/sound/soc/qcom/qdsp6/q6asm-dai.c
+++ b/sound/soc/qcom/qdsp6/q6asm-dai.c
@@ -41,6 +41,9 @@
 #define Q6ASM_DAI_TX	1
 #define Q6ASM_DAI_RX	2
 
+#define ALAC_CH_LAYOUT_MONO   ((101 << 16) | 1)
+#define ALAC_CH_LAYOUT_STEREO ((101 << 16) | 2)
+
 enum stream_state {
 	Q6ASM_STREAM_IDLE = 0,
 	Q6ASM_STREAM_STOPPED,
@@ -69,11 +72,13 @@ struct q6asm_dai_rtd {
 };
 
 struct q6asm_dai_data {
+	struct snd_soc_dai_driver *dais;
+	int num_dais;
 	long long int sid;
 };
 
 static const struct snd_pcm_hardware q6asm_dai_hardware_capture = {
-	.info =                 (SNDRV_PCM_INFO_MMAP |
+	.info =                 (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_BATCH |
 				SNDRV_PCM_INFO_BLOCK_TRANSFER |
 				SNDRV_PCM_INFO_MMAP_VALID |
 				SNDRV_PCM_INFO_INTERLEAVED |
@@ -95,7 +100,7 @@ static const struct snd_pcm_hardware q6asm_dai_hardware_capture = {
 };
 
 static struct snd_pcm_hardware q6asm_dai_hardware_playback = {
-	.info =                 (SNDRV_PCM_INFO_MMAP |
+	.info =                 (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_BATCH |
 				SNDRV_PCM_INFO_BLOCK_TRANSFER |
 				SNDRV_PCM_INFO_MMAP_VALID |
 				SNDRV_PCM_INFO_INTERLEAVED |
@@ -250,7 +255,7 @@ static int q6asm_dai_prepare(struct snd_soc_component *component,
 
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
 		ret = q6asm_open_write(prtd->audio_client, FORMAT_LINEAR_PCM,
-				       prtd->bits_per_sample);
+				       0, prtd->bits_per_sample);
 	} else if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
 		ret = q6asm_open_read(prtd->audio_client, FORMAT_LINEAR_PCM,
 				       prtd->bits_per_sample);
@@ -328,7 +333,7 @@ static int q6asm_dai_open(struct snd_soc_component *component,
 {
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct snd_soc_pcm_runtime *soc_prtd = substream->private_data;
-	struct snd_soc_dai *cpu_dai = soc_prtd->cpu_dai;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(soc_prtd, 0);
 	struct q6asm_dai_rtd *prtd;
 	struct q6asm_dai_data *pdata;
 	struct device *dev = component->dev;
@@ -540,7 +545,7 @@ static int q6asm_dai_compr_open(struct snd_compr_stream *stream)
 	struct snd_soc_pcm_runtime *rtd = stream->private_data;
 	struct snd_soc_component *c = snd_soc_rtdcom_lookup(rtd, DRV_NAME);
 	struct snd_compr_runtime *runtime = stream->runtime;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	struct q6asm_dai_data *pdata;
 	struct device *dev = c->dev;
 	struct q6asm_dai_rtd *prtd;
@@ -627,10 +632,17 @@ static int q6asm_dai_compr_set_params(struct snd_compr_stream *stream,
 	int dir = stream->direction;
 	struct q6asm_dai_data *pdata;
 	struct q6asm_flac_cfg flac_cfg;
+	struct q6asm_wma_cfg wma_cfg;
+	struct q6asm_alac_cfg alac_cfg;
+	struct q6asm_ape_cfg ape_cfg;
+	unsigned int wma_v9 = 0;
 	struct device *dev = c->dev;
 	int ret;
 	union snd_codec_options *codec_options;
 	struct snd_dec_flac *flac;
+	struct snd_dec_wma *wma;
+	struct snd_dec_alac *alac;
+	struct snd_dec_ape *ape;
 
 	codec_options = &(prtd->codec_param.codec.options);
 
@@ -652,7 +664,7 @@ static int q6asm_dai_compr_set_params(struct snd_compr_stream *stream,
 	prtd->bits_per_sample = 16;
 	if (dir == SND_COMPRESS_PLAYBACK) {
 		ret = q6asm_open_write(prtd->audio_client, params->codec.id,
-					prtd->bits_per_sample);
+				params->codec.profile, prtd->bits_per_sample);
 
 		if (ret < 0) {
 			dev_err(dev, "q6asm_open_write failed\n");
@@ -692,6 +704,126 @@ static int q6asm_dai_compr_set_params(struct snd_compr_stream *stream,
 			return -EIO;
 		}
 		break;
+
+	case SND_AUDIOCODEC_WMA:
+		wma = &codec_options->wma_d;
+
+		memset(&wma_cfg, 0x0, sizeof(struct q6asm_wma_cfg));
+
+		wma_cfg.sample_rate =  params->codec.sample_rate;
+		wma_cfg.num_channels = params->codec.ch_in;
+		wma_cfg.bytes_per_sec = params->codec.bit_rate / 8;
+		wma_cfg.block_align = params->codec.align;
+		wma_cfg.bits_per_sample = prtd->bits_per_sample;
+		wma_cfg.enc_options = wma->encoder_option;
+		wma_cfg.adv_enc_options = wma->adv_encoder_option;
+		wma_cfg.adv_enc_options2 = wma->adv_encoder_option2;
+
+		if (wma_cfg.num_channels == 1)
+			wma_cfg.channel_mask = 4; /* Mono Center */
+		else if (wma_cfg.num_channels == 2)
+			wma_cfg.channel_mask = 3; /* Stereo FL/FR */
+		else
+			return -EINVAL;
+
+		/* check the codec profile */
+		switch (params->codec.profile) {
+		case SND_AUDIOPROFILE_WMA9:
+			wma_cfg.fmtag = 0x161;
+			wma_v9 = 1;
+			break;
+
+		case SND_AUDIOPROFILE_WMA10:
+			wma_cfg.fmtag = 0x166;
+			break;
+
+		case SND_AUDIOPROFILE_WMA9_PRO:
+			wma_cfg.fmtag = 0x162;
+			break;
+
+		case SND_AUDIOPROFILE_WMA9_LOSSLESS:
+			wma_cfg.fmtag = 0x163;
+			break;
+
+		case SND_AUDIOPROFILE_WMA10_LOSSLESS:
+			wma_cfg.fmtag = 0x167;
+			break;
+
+		default:
+			dev_err(dev, "Unknown WMA profile:%x\n",
+				params->codec.profile);
+			return -EIO;
+		}
+
+		if (wma_v9)
+			ret = q6asm_stream_media_format_block_wma_v9(
+					prtd->audio_client, &wma_cfg);
+		else
+			ret = q6asm_stream_media_format_block_wma_v10(
+					prtd->audio_client, &wma_cfg);
+		if (ret < 0) {
+			dev_err(dev, "WMA9 CMD failed:%d\n", ret);
+			return -EIO;
+		}
+		break;
+
+	case SND_AUDIOCODEC_ALAC:
+		memset(&alac_cfg, 0x0, sizeof(alac_cfg));
+		alac = &codec_options->alac_d;
+
+		alac_cfg.sample_rate = params->codec.sample_rate;
+		alac_cfg.avg_bit_rate = params->codec.bit_rate;
+		alac_cfg.bit_depth = prtd->bits_per_sample;
+		alac_cfg.num_channels = params->codec.ch_in;
+
+		alac_cfg.frame_length = alac->frame_length;
+		alac_cfg.pb = alac->pb;
+		alac_cfg.mb = alac->mb;
+		alac_cfg.kb = alac->kb;
+		alac_cfg.max_run = alac->max_run;
+		alac_cfg.compatible_version = alac->compatible_version;
+		alac_cfg.max_frame_bytes = alac->max_frame_bytes;
+
+		switch (params->codec.ch_in) {
+		case 1:
+			alac_cfg.channel_layout_tag = ALAC_CH_LAYOUT_MONO;
+			break;
+		case 2:
+			alac_cfg.channel_layout_tag = ALAC_CH_LAYOUT_STEREO;
+			break;
+		}
+		ret = q6asm_stream_media_format_block_alac(prtd->audio_client,
+							   &alac_cfg);
+		if (ret < 0) {
+			dev_err(dev, "ALAC CMD Format block failed:%d\n", ret);
+			return -EIO;
+		}
+		break;
+
+	case SND_AUDIOCODEC_APE:
+		memset(&ape_cfg, 0x0, sizeof(ape_cfg));
+		ape = &codec_options->ape_d;
+
+		ape_cfg.sample_rate = params->codec.sample_rate;
+		ape_cfg.num_channels = params->codec.ch_in;
+		ape_cfg.bits_per_sample = prtd->bits_per_sample;
+
+		ape_cfg.compatible_version = ape->compatible_version;
+		ape_cfg.compression_level = ape->compression_level;
+		ape_cfg.format_flags = ape->format_flags;
+		ape_cfg.blocks_per_frame = ape->blocks_per_frame;
+		ape_cfg.final_frame_blocks = ape->final_frame_blocks;
+		ape_cfg.total_frames = ape->total_frames;
+		ape_cfg.seek_table_present = ape->seek_table_present;
+
+		ret = q6asm_stream_media_format_block_ape(prtd->audio_client,
+							  &ape_cfg);
+		if (ret < 0) {
+			dev_err(dev, "APE CMD Format block failed:%d\n", ret);
+			return -EIO;
+		}
+		break;
+
 	default:
 		break;
 	}
@@ -791,9 +923,12 @@ static int q6asm_dai_compr_get_caps(struct snd_compr_stream *stream,
 	caps->max_fragment_size = COMPR_PLAYBACK_MAX_FRAGMENT_SIZE;
 	caps->min_fragments = COMPR_PLAYBACK_MIN_NUM_FRAGMENTS;
 	caps->max_fragments = COMPR_PLAYBACK_MAX_NUM_FRAGMENTS;
-	caps->num_codecs = 2;
+	caps->num_codecs = 5;
 	caps->codecs[0] = SND_AUDIOCODEC_MP3;
 	caps->codecs[1] = SND_AUDIOCODEC_FLAC;
+	caps->codecs[2] = SND_AUDIOCODEC_WMA;
+	caps->codecs[3] = SND_AUDIOCODEC_ALAC;
+	caps->codecs[4] = SND_AUDIOCODEC_APE;
 
 	return 0;
 }
@@ -889,7 +1024,7 @@ static const struct snd_soc_component_driver q6asm_fe_dai_component = {
 	.compr_ops	= &q6asm_dai_compr_ops,
 };
 
-static struct snd_soc_dai_driver q6asm_fe_dais[] = {
+static struct snd_soc_dai_driver q6asm_fe_dais_template[] = {
 	Q6ASM_FEDAI_DRIVER(1),
 	Q6ASM_FEDAI_DRIVER(2),
 	Q6ASM_FEDAI_DRIVER(3),
@@ -903,10 +1038,22 @@ static struct snd_soc_dai_driver q6asm_fe_dais[] = {
 static int of_q6asm_parse_dai_data(struct device *dev,
 				    struct q6asm_dai_data *pdata)
 {
-	static struct snd_soc_dai_driver *dai_drv;
+	struct snd_soc_dai_driver *dai_drv;
 	struct snd_soc_pcm_stream empty_stream;
 	struct device_node *node;
-	int ret, id, dir;
+	int ret, id, dir, idx = 0;
+
+
+	pdata->num_dais = of_get_child_count(dev->of_node);
+	if (!pdata->num_dais) {
+		dev_err(dev, "No dais found in DT\n");
+		return -EINVAL;
+	}
+
+	pdata->dais = devm_kcalloc(dev, pdata->num_dais, sizeof(*dai_drv),
+				   GFP_KERNEL);
+	if (!pdata->dais)
+		return -ENOMEM;
 
 	memset(&empty_stream, 0, sizeof(empty_stream));
 
@@ -917,7 +1064,8 @@ static int of_q6asm_parse_dai_data(struct device *dev,
 			continue;
 		}
 
-		dai_drv = &q6asm_fe_dais[id];
+		dai_drv = &pdata->dais[idx++];
+		*dai_drv = q6asm_fe_dais_template[id];
 
 		ret = of_property_read_u32(node, "direction", &dir);
 		if (ret)
@@ -955,11 +1103,12 @@ static int q6asm_dai_probe(struct platform_device *pdev)
 
 	dev_set_drvdata(dev, pdata);
 
-	of_q6asm_parse_dai_data(dev, pdata);
+	rc = of_q6asm_parse_dai_data(dev, pdata);
+	if (rc)
+		return rc;
 
 	return devm_snd_soc_register_component(dev, &q6asm_fe_dai_component,
-					q6asm_fe_dais,
-					ARRAY_SIZE(q6asm_fe_dais));
+					       pdata->dais, pdata->num_dais);
 }
 
 static const struct of_device_id q6asm_dai_device_id[] = {
diff --git a/sound/soc/qcom/qdsp6/q6asm.c b/sound/soc/qcom/qdsp6/q6asm.c
index 36e0eab..0e0e8f7 100644
--- a/sound/soc/qcom/qdsp6/q6asm.c
+++ b/sound/soc/qcom/qdsp6/q6asm.c
@@ -39,6 +39,8 @@
 #define ASM_MEDIA_FMT_MULTI_CHANNEL_PCM_V2	0x00010DA5
 #define ASM_MEDIA_FMT_MP3			0x00010BE9
 #define ASM_MEDIA_FMT_FLAC			0x00010C16
+#define ASM_MEDIA_FMT_WMA_V9			0x00010DA8
+#define ASM_MEDIA_FMT_WMA_V10			0x00010DA7
 #define ASM_DATA_CMD_WRITE_V2			0x00010DAB
 #define ASM_DATA_CMD_READ_V2			0x00010DAC
 #define ASM_SESSION_CMD_SUSPEND			0x00010DEC
@@ -46,6 +48,8 @@
 #define ASM_STREAM_CMD_OPEN_READ_V3                 0x00010DB4
 #define ASM_DATA_EVENT_READ_DONE_V2 0x00010D9A
 #define ASM_STREAM_CMD_OPEN_READWRITE_V2        0x00010D8D
+#define ASM_MEDIA_FMT_ALAC			0x00012f31
+#define ASM_MEDIA_FMT_APE			0x00012f32
 
 
 #define ASM_LEGACY_STREAM_SESSION	0
@@ -104,6 +108,63 @@ struct asm_flac_fmt_blk_v2 {
 	u16 reserved;
 } __packed;
 
+struct asm_wmastdv9_fmt_blk_v2 {
+	struct asm_data_cmd_media_fmt_update_v2 fmt_blk;
+	u16          fmtag;
+	u16          num_channels;
+	u32          sample_rate;
+	u32          bytes_per_sec;
+	u16          blk_align;
+	u16          bits_per_sample;
+	u32          channel_mask;
+	u16          enc_options;
+	u16          reserved;
+} __packed;
+
+struct asm_wmaprov10_fmt_blk_v2 {
+	struct asm_data_cmd_media_fmt_update_v2 fmt_blk;
+	u16          fmtag;
+	u16          num_channels;
+	u32          sample_rate;
+	u32          bytes_per_sec;
+	u16          blk_align;
+	u16          bits_per_sample;
+	u32          channel_mask;
+	u16          enc_options;
+	u16          advanced_enc_options1;
+	u32          advanced_enc_options2;
+} __packed;
+
+struct asm_alac_fmt_blk_v2 {
+	struct asm_data_cmd_media_fmt_update_v2 fmt_blk;
+	u32 frame_length;
+	u8 compatible_version;
+	u8 bit_depth;
+	u8 pb;
+	u8 mb;
+	u8 kb;
+	u8 num_channels;
+	u16 max_run;
+	u32 max_frame_bytes;
+	u32 avg_bit_rate;
+	u32 sample_rate;
+	u32 channel_layout_tag;
+} __packed;
+
+struct asm_ape_fmt_blk_v2 {
+	struct asm_data_cmd_media_fmt_update_v2 fmt_blk;
+	u16 compatible_version;
+	u16 compression_level;
+	u32 format_flags;
+	u32 blocks_per_frame;
+	u32 final_frame_blocks;
+	u32 total_frames;
+	u16 bits_per_sample;
+	u16 num_channels;
+	u32 sample_rate;
+	u32 seek_table_present;
+} __packed;
+
 struct asm_stream_cmd_set_encdec_param {
 	u32                  param_id;
 	u32                  param_size;
@@ -858,7 +919,7 @@ static int q6asm_ac_send_cmd_sync(struct audio_client *ac, struct apr_pkt *pkt)
  * Return: Will be an negative value on error or zero on success
  */
 int q6asm_open_write(struct audio_client *ac, uint32_t format,
-		     uint16_t bits_per_sample)
+		     u32 codec_profile, uint16_t bits_per_sample)
 {
 	struct asm_stream_cmd_open_write_v3 *open;
 	struct apr_pkt *pkt;
@@ -894,6 +955,30 @@ int q6asm_open_write(struct audio_client *ac, uint32_t format,
 	case SND_AUDIOCODEC_FLAC:
 		open->dec_fmt_id = ASM_MEDIA_FMT_FLAC;
 		break;
+	case SND_AUDIOCODEC_WMA:
+		switch (codec_profile) {
+		case SND_AUDIOPROFILE_WMA9:
+			open->dec_fmt_id = ASM_MEDIA_FMT_WMA_V9;
+			break;
+		case SND_AUDIOPROFILE_WMA10:
+		case SND_AUDIOPROFILE_WMA9_PRO:
+		case SND_AUDIOPROFILE_WMA9_LOSSLESS:
+		case SND_AUDIOPROFILE_WMA10_LOSSLESS:
+			open->dec_fmt_id = ASM_MEDIA_FMT_WMA_V10;
+			break;
+		default:
+			dev_err(ac->dev, "Invalid codec profile 0x%x\n",
+				codec_profile);
+			rc = -EINVAL;
+			goto err;
+		}
+		break;
+	case SND_AUDIOCODEC_ALAC:
+		open->dec_fmt_id = ASM_MEDIA_FMT_ALAC;
+		break;
+	case SND_AUDIOCODEC_APE:
+		open->dec_fmt_id = ASM_MEDIA_FMT_APE;
+		break;
 	default:
 		dev_err(ac->dev, "Invalid format 0x%x\n", format);
 		rc = -EINVAL;
@@ -1075,6 +1160,162 @@ int q6asm_stream_media_format_block_flac(struct audio_client *ac,
 	return rc;
 }
 EXPORT_SYMBOL_GPL(q6asm_stream_media_format_block_flac);
+
+int q6asm_stream_media_format_block_wma_v9(struct audio_client *ac,
+					   struct q6asm_wma_cfg *cfg)
+{
+	struct asm_wmastdv9_fmt_blk_v2 *fmt;
+	struct apr_pkt *pkt;
+	void *p;
+	int rc, pkt_size;
+
+	pkt_size = APR_HDR_SIZE + sizeof(*fmt);
+	p = kzalloc(pkt_size, GFP_KERNEL);
+	if (!p)
+		return -ENOMEM;
+
+	pkt = p;
+	fmt = p + APR_HDR_SIZE;
+
+	q6asm_add_hdr(ac, &pkt->hdr, pkt_size, true, ac->stream_id);
+
+	pkt->hdr.opcode = ASM_DATA_CMD_MEDIA_FMT_UPDATE_V2;
+	fmt->fmt_blk.fmt_blk_size = sizeof(*fmt) - sizeof(fmt->fmt_blk);
+	fmt->fmtag = cfg->fmtag;
+	fmt->num_channels = cfg->num_channels;
+	fmt->sample_rate = cfg->sample_rate;
+	fmt->bytes_per_sec = cfg->bytes_per_sec;
+	fmt->blk_align = cfg->block_align;
+	fmt->bits_per_sample = cfg->bits_per_sample;
+	fmt->channel_mask = cfg->channel_mask;
+	fmt->enc_options = cfg->enc_options;
+	fmt->reserved = 0;
+
+	rc = q6asm_ac_send_cmd_sync(ac, pkt);
+	kfree(pkt);
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(q6asm_stream_media_format_block_wma_v9);
+
+int q6asm_stream_media_format_block_wma_v10(struct audio_client *ac,
+					    struct q6asm_wma_cfg *cfg)
+{
+	struct asm_wmaprov10_fmt_blk_v2 *fmt;
+	struct apr_pkt *pkt;
+	void *p;
+	int rc, pkt_size;
+
+	pkt_size = APR_HDR_SIZE + sizeof(*fmt);
+	p = kzalloc(pkt_size, GFP_KERNEL);
+	if (!p)
+		return -ENOMEM;
+
+	pkt = p;
+	fmt = p + APR_HDR_SIZE;
+
+	q6asm_add_hdr(ac, &pkt->hdr, pkt_size, true, ac->stream_id);
+
+	pkt->hdr.opcode = ASM_DATA_CMD_MEDIA_FMT_UPDATE_V2;
+	fmt->fmt_blk.fmt_blk_size = sizeof(*fmt) - sizeof(fmt->fmt_blk);
+	fmt->fmtag = cfg->fmtag;
+	fmt->num_channels = cfg->num_channels;
+	fmt->sample_rate = cfg->sample_rate;
+	fmt->bytes_per_sec = cfg->bytes_per_sec;
+	fmt->blk_align = cfg->block_align;
+	fmt->bits_per_sample = cfg->bits_per_sample;
+	fmt->channel_mask = cfg->channel_mask;
+	fmt->enc_options = cfg->enc_options;
+	fmt->advanced_enc_options1 = cfg->adv_enc_options;
+	fmt->advanced_enc_options2 = cfg->adv_enc_options2;
+
+	rc = q6asm_ac_send_cmd_sync(ac, pkt);
+	kfree(pkt);
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(q6asm_stream_media_format_block_wma_v10);
+
+int q6asm_stream_media_format_block_alac(struct audio_client *ac,
+					 struct q6asm_alac_cfg *cfg)
+{
+	struct asm_alac_fmt_blk_v2 *fmt;
+	struct apr_pkt *pkt;
+	void *p;
+	int rc, pkt_size;
+
+	pkt_size = APR_HDR_SIZE + sizeof(*fmt);
+	p = kzalloc(pkt_size, GFP_KERNEL);
+	if (!p)
+		return -ENOMEM;
+
+	pkt = p;
+	fmt = p + APR_HDR_SIZE;
+
+	q6asm_add_hdr(ac, &pkt->hdr, pkt_size, true, ac->stream_id);
+
+	pkt->hdr.opcode = ASM_DATA_CMD_MEDIA_FMT_UPDATE_V2;
+	fmt->fmt_blk.fmt_blk_size = sizeof(*fmt) - sizeof(fmt->fmt_blk);
+
+	fmt->frame_length = cfg->frame_length;
+	fmt->compatible_version = cfg->compatible_version;
+	fmt->bit_depth =  cfg->bit_depth;
+	fmt->num_channels = cfg->num_channels;
+	fmt->max_run = cfg->max_run;
+	fmt->max_frame_bytes = cfg->max_frame_bytes;
+	fmt->avg_bit_rate = cfg->avg_bit_rate;
+	fmt->sample_rate = cfg->sample_rate;
+	fmt->channel_layout_tag = cfg->channel_layout_tag;
+	fmt->pb = cfg->pb;
+	fmt->mb = cfg->mb;
+	fmt->kb = cfg->kb;
+
+	rc = q6asm_ac_send_cmd_sync(ac, pkt);
+	kfree(pkt);
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(q6asm_stream_media_format_block_alac);
+
+int q6asm_stream_media_format_block_ape(struct audio_client *ac,
+					struct q6asm_ape_cfg *cfg)
+{
+	struct asm_ape_fmt_blk_v2 *fmt;
+	struct apr_pkt *pkt;
+	void *p;
+	int rc, pkt_size;
+
+	pkt_size = APR_HDR_SIZE + sizeof(*fmt);
+	p = kzalloc(pkt_size, GFP_KERNEL);
+	if (!p)
+		return -ENOMEM;
+
+	pkt = p;
+	fmt = p + APR_HDR_SIZE;
+
+	q6asm_add_hdr(ac, &pkt->hdr, pkt_size, true, ac->stream_id);
+
+	pkt->hdr.opcode = ASM_DATA_CMD_MEDIA_FMT_UPDATE_V2;
+	fmt->fmt_blk.fmt_blk_size = sizeof(*fmt) - sizeof(fmt->fmt_blk);
+
+	fmt->compatible_version = cfg->compatible_version;
+	fmt->compression_level = cfg->compression_level;
+	fmt->format_flags = cfg->format_flags;
+	fmt->blocks_per_frame = cfg->blocks_per_frame;
+	fmt->final_frame_blocks = cfg->final_frame_blocks;
+	fmt->total_frames = cfg->total_frames;
+	fmt->bits_per_sample = cfg->bits_per_sample;
+	fmt->num_channels = cfg->num_channels;
+	fmt->sample_rate = cfg->sample_rate;
+	fmt->seek_table_present = cfg->seek_table_present;
+
+	rc = q6asm_ac_send_cmd_sync(ac, pkt);
+	kfree(pkt);
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(q6asm_stream_media_format_block_ape);
+
 /**
  * q6asm_enc_cfg_blk_pcm_format_support() - setup pcm configuration for capture
  *
diff --git a/sound/soc/qcom/qdsp6/q6asm.h b/sound/soc/qcom/qdsp6/q6asm.h
index 6764f55..38a207d 100644
--- a/sound/soc/qcom/qdsp6/q6asm.h
+++ b/sound/soc/qcom/qdsp6/q6asm.h
@@ -45,6 +45,47 @@ struct q6asm_flac_cfg {
         u16 md5_sum;
 };
 
+struct q6asm_wma_cfg {
+	u32 fmtag;
+	u32 num_channels;
+	u32 sample_rate;
+	u32 bytes_per_sec;
+	u32 block_align;
+	u32 bits_per_sample;
+	u32 channel_mask;
+	u32 enc_options;
+	u32 adv_enc_options;
+	u32 adv_enc_options2;
+};
+
+struct q6asm_alac_cfg {
+	u32 frame_length;
+	u8 compatible_version;
+	u8 bit_depth;
+	u8 pb;
+	u8 mb;
+	u8 kb;
+	u8 num_channels;
+	u16 max_run;
+	u32 max_frame_bytes;
+	u32 avg_bit_rate;
+	u32 sample_rate;
+	u32 channel_layout_tag;
+};
+
+struct q6asm_ape_cfg {
+	u16 compatible_version;
+	u16 compression_level;
+	u32 format_flags;
+	u32 blocks_per_frame;
+	u32 final_frame_blocks;
+	u32 total_frames;
+	u16 bits_per_sample;
+	u16 num_channels;
+	u32 sample_rate;
+	u32 seek_table_present;
+};
+
 typedef void (*q6asm_cb) (uint32_t opcode, uint32_t token,
 			  void *payload, void *priv);
 struct audio_client;
@@ -55,7 +96,7 @@ void q6asm_audio_client_free(struct audio_client *ac);
 int q6asm_write_async(struct audio_client *ac, uint32_t len, uint32_t msw_ts,
 		       uint32_t lsw_ts, uint32_t flags);
 int q6asm_open_write(struct audio_client *ac, uint32_t format,
-		     uint16_t bits_per_sample);
+		     u32 codec_profile, uint16_t bits_per_sample);
 
 int q6asm_open_read(struct audio_client *ac, uint32_t format,
 		     uint16_t bits_per_sample);
@@ -69,6 +110,14 @@ int q6asm_media_format_block_multi_ch_pcm(struct audio_client *ac,
 					  uint16_t bits_per_sample);
 int q6asm_stream_media_format_block_flac(struct audio_client *ac,
 					 struct q6asm_flac_cfg *cfg);
+int q6asm_stream_media_format_block_wma_v9(struct audio_client *ac,
+					   struct q6asm_wma_cfg *cfg);
+int q6asm_stream_media_format_block_wma_v10(struct audio_client *ac,
+					    struct q6asm_wma_cfg *cfg);
+int q6asm_stream_media_format_block_alac(struct audio_client *ac,
+					 struct q6asm_alac_cfg *cfg);
+int q6asm_stream_media_format_block_ape(struct audio_client *ac,
+					struct q6asm_ape_cfg *cfg);
 int q6asm_run(struct audio_client *ac, uint32_t flags, uint32_t msw_ts,
 	      uint32_t lsw_ts);
 int q6asm_run_nowait(struct audio_client *ac, uint32_t flags, uint32_t msw_ts,
diff --git a/sound/soc/qcom/qdsp6/q6routing.c b/sound/soc/qcom/qdsp6/q6routing.c
index 2072410..46e5061 100644
--- a/sound/soc/qcom/qdsp6/q6routing.c
+++ b/sound/soc/qcom/qdsp6/q6routing.c
@@ -918,25 +918,6 @@ static const struct snd_soc_dapm_route intercon[] = {
 	{"MM_UL6", NULL, "MultiMedia6 Mixer"},
 	{"MM_UL7", NULL, "MultiMedia7 Mixer"},
 	{"MM_UL8", NULL, "MultiMedia8 Mixer"},
-
-	{"MM_DL1",  NULL, "MultiMedia1 Playback" },
-	{"MM_DL2",  NULL, "MultiMedia2 Playback" },
-	{"MM_DL3",  NULL, "MultiMedia3 Playback" },
-	{"MM_DL4",  NULL, "MultiMedia4 Playback" },
-	{"MM_DL5",  NULL, "MultiMedia5 Playback" },
-	{"MM_DL6",  NULL, "MultiMedia6 Playback" },
-	{"MM_DL7",  NULL, "MultiMedia7 Playback" },
-	{"MM_DL8",  NULL, "MultiMedia8 Playback" },
-
-	{"MultiMedia1 Capture", NULL, "MM_UL1"},
-	{"MultiMedia2 Capture", NULL, "MM_UL2"},
-	{"MultiMedia3 Capture", NULL, "MM_UL3"},
-	{"MultiMedia4 Capture", NULL, "MM_UL4"},
-	{"MultiMedia5 Capture", NULL, "MM_UL5"},
-	{"MultiMedia6 Capture", NULL, "MM_UL6"},
-	{"MultiMedia7 Capture", NULL, "MM_UL7"},
-	{"MultiMedia8 Capture", NULL, "MM_UL8"},
-
 };
 
 static int routing_hw_params(struct snd_soc_component *component,
@@ -945,7 +926,7 @@ static int routing_hw_params(struct snd_soc_component *component,
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct msm_routing_data *data = dev_get_drvdata(component->dev);
-	unsigned int be_id = rtd->cpu_dai->id;
+	unsigned int be_id = asoc_rtd_to_cpu(rtd, 0)->id;
 	struct session_data *session;
 	int path_type;
 
diff --git a/sound/soc/qcom/sdm845.c b/sound/soc/qcom/sdm845.c
index 3b5547a..b2de65c 100644
--- a/sound/soc/qcom/sdm845.c
+++ b/sound/soc/qcom/sdm845.c
@@ -11,6 +11,7 @@
 #include <sound/pcm_params.h>
 #include <sound/jack.h>
 #include <sound/soc.h>
+#include <linux/soundwire/sdw.h>
 #include <uapi/linux/input-event-codes.h>
 #include "common.h"
 #include "qdsp6/q6afe.h"
@@ -31,10 +32,12 @@
 struct sdm845_snd_data {
 	struct snd_soc_jack jack;
 	bool jack_setup;
+	bool stream_prepared[SLIM_MAX_RX_PORTS];
 	struct snd_soc_card *card;
 	uint32_t pri_mi2s_clk_count;
 	uint32_t sec_mi2s_clk_count;
 	uint32_t quat_tdm_clk_count;
+	struct sdw_stream_runtime *sruntime[SLIM_MAX_RX_PORTS];
 };
 
 static unsigned int tdm_slot_offset[8] = {0, 4, 8, 12, 16, 20, 24, 28};
@@ -43,14 +46,21 @@ static int sdm845_slim_snd_hw_params(struct snd_pcm_substream *substream,
 				     struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai_link *dai_link = rtd->dai_link;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+	struct snd_soc_dai *codec_dai;
+	struct sdm845_snd_data *pdata = snd_soc_card_get_drvdata(rtd->card);
 	u32 rx_ch[SLIM_MAX_RX_PORTS], tx_ch[SLIM_MAX_TX_PORTS];
+	struct sdw_stream_runtime *sruntime;
 	u32 rx_ch_cnt = 0, tx_ch_cnt = 0;
 	int ret = 0, i;
 
-	for (i = 0 ; i < dai_link->num_codecs; i++) {
-		ret = snd_soc_dai_get_channel_map(rtd->codec_dais[i],
+	for_each_rtd_codec_dais(rtd, i, codec_dai) {
+		sruntime = snd_soc_dai_get_sdw_stream(codec_dai,
+						      substream->stream);
+		if (sruntime != ERR_PTR(-ENOTSUPP))
+			pdata->sruntime[cpu_dai->id] = sruntime;
+
+		ret = snd_soc_dai_get_channel_map(codec_dai,
 				&tx_ch_cnt, tx_ch, &rx_ch_cnt, rx_ch);
 
 		if (ret != 0 && ret != -ENOTSUPP) {
@@ -76,7 +86,8 @@ static int sdm845_tdm_snd_hw_params(struct snd_pcm_substream *substream,
 					struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+	struct snd_soc_dai *codec_dai;
 	int ret = 0, j;
 	int channels, slot_width;
 
@@ -125,8 +136,7 @@ static int sdm845_tdm_snd_hw_params(struct snd_pcm_substream *substream,
 		}
 	}
 
-	for (j = 0; j < rtd->num_codecs; j++) {
-		struct snd_soc_dai *codec_dai = rtd->codec_dais[j];
+	for_each_rtd_codec_dais(rtd, j, codec_dai) {
 
 		if (!strcmp(codec_dai->component->name_prefix, "Left")) {
 			ret = snd_soc_dai_set_tdm_slot(
@@ -161,8 +171,8 @@ static int sdm845_snd_hw_params(struct snd_pcm_substream *substream,
 					struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	int ret = 0;
 
 	switch (cpu_dai->id) {
@@ -210,11 +220,10 @@ static int sdm845_dai_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct snd_soc_component *component;
 	struct snd_soc_card *card = rtd->card;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	struct sdm845_snd_data *pdata = snd_soc_card_get_drvdata(card);
 	struct snd_jack *jack;
-	struct snd_soc_dai_link *dai_link = rtd->dai_link;
 	/*
 	 * Codec SLIMBUS configuration
 	 * RX1, RX2, RX3, RX4, RX5, RX6, RX7, RX8, RX9, RX10, RX11, RX12, RX13
@@ -266,8 +275,8 @@ static int sdm845_dai_init(struct snd_soc_pcm_runtime *rtd)
 		}
 		break;
 	case SLIMBUS_0_RX...SLIMBUS_6_TX:
-		for (i = 0 ; i < dai_link->num_codecs; i++) {
-			rval = snd_soc_dai_set_channel_map(rtd->codec_dais[i],
+		for_each_rtd_codec_dais(rtd, i, codec_dai) {
+			rval = snd_soc_dai_set_channel_map(codec_dai,
 							  ARRAY_SIZE(tx_ch),
 							  tx_ch,
 							  ARRAY_SIZE(rx_ch),
@@ -275,7 +284,7 @@ static int sdm845_dai_init(struct snd_soc_pcm_runtime *rtd)
 			if (rval != 0 && rval != -ENOTSUPP)
 				return rval;
 
-			snd_soc_dai_set_sysclk(rtd->codec_dais[i], 0,
+			snd_soc_dai_set_sysclk(codec_dai, 0,
 					       WCD934X_DEFAULT_MCLK_RATE,
 					       SNDRV_PCM_STREAM_PLAYBACK);
 		}
@@ -295,8 +304,8 @@ static int sdm845_snd_startup(struct snd_pcm_substream *substream)
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_card *card = rtd->card;
 	struct sdm845_snd_data *data = snd_soc_card_get_drvdata(card);
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	int j;
 	int ret;
 
@@ -345,8 +354,7 @@ static int sdm845_snd_startup(struct snd_pcm_substream *substream)
 
 		codec_dai_fmt |= SND_SOC_DAIFMT_IB_NF | SND_SOC_DAIFMT_DSP_B;
 
-		for (j = 0; j < rtd->num_codecs; j++) {
-			codec_dai = rtd->codec_dais[j];
+		for_each_rtd_codec_dais(rtd, j, codec_dai) {
 
 			if (!strcmp(codec_dai->component->name_prefix,
 				    "Left")) {
@@ -386,7 +394,7 @@ static void  sdm845_snd_shutdown(struct snd_pcm_substream *substream)
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_card *card = rtd->card;
 	struct sdm845_snd_data *data = snd_soc_card_get_drvdata(card);
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 
 	switch (cpu_dai->id) {
 	case PRIMARY_MI2S_RX:
@@ -427,8 +435,65 @@ static void  sdm845_snd_shutdown(struct snd_pcm_substream *substream)
 	}
 }
 
+static int sdm845_snd_prepare(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct sdm845_snd_data *data = snd_soc_card_get_drvdata(rtd->card);
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+	struct sdw_stream_runtime *sruntime = data->sruntime[cpu_dai->id];
+	int ret;
+
+	if (!sruntime)
+		return 0;
+
+	if (data->stream_prepared[cpu_dai->id]) {
+		sdw_disable_stream(sruntime);
+		sdw_deprepare_stream(sruntime);
+		data->stream_prepared[cpu_dai->id] = false;
+	}
+
+	ret = sdw_prepare_stream(sruntime);
+	if (ret)
+		return ret;
+
+	/**
+	 * NOTE: there is a strict hw requirement about the ordering of port
+	 * enables and actual WSA881x PA enable. PA enable should only happen
+	 * after soundwire ports are enabled if not DC on the line is
+	 * accumulated resulting in Click/Pop Noise
+	 * PA enable/mute are handled as part of codec DAPM and digital mute.
+	 */
+
+	ret = sdw_enable_stream(sruntime);
+	if (ret) {
+		sdw_deprepare_stream(sruntime);
+		return ret;
+	}
+	data->stream_prepared[cpu_dai->id] = true;
+
+	return ret;
+}
+
+static int sdm845_snd_hw_free(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct sdm845_snd_data *data = snd_soc_card_get_drvdata(rtd->card);
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+	struct sdw_stream_runtime *sruntime = data->sruntime[cpu_dai->id];
+
+	if (sruntime && data->stream_prepared[cpu_dai->id]) {
+		sdw_disable_stream(sruntime);
+		sdw_deprepare_stream(sruntime);
+		data->stream_prepared[cpu_dai->id] = false;
+	}
+
+	return 0;
+}
+
 static const struct snd_soc_ops sdm845_be_ops = {
 	.hw_params = sdm845_snd_hw_params,
+	.hw_free = sdm845_snd_hw_free,
+	.prepare = sdm845_snd_prepare,
 	.startup = sdm845_snd_startup,
 	.shutdown = sdm845_snd_shutdown,
 };
diff --git a/sound/soc/qcom/storm.c b/sound/soc/qcom/storm.c
index e6666e5..3a6e187 100644
--- a/sound/soc/qcom/storm.c
+++ b/sound/soc/qcom/storm.c
@@ -39,7 +39,7 @@ static int storm_ops_hw_params(struct snd_pcm_substream *substream,
 	 */
 	sysclk_freq = rate * bitwidth * 2 * STORM_SYSCLK_MULT;
 
-	ret = snd_soc_dai_set_sysclk(soc_runtime->cpu_dai, 0, sysclk_freq, 0);
+	ret = snd_soc_dai_set_sysclk(asoc_rtd_to_cpu(soc_runtime, 0), 0, sysclk_freq, 0);
 	if (ret) {
 		dev_err(card->dev, "error setting sysclk to %u: %d\n",
 			sysclk_freq, ret);
diff --git a/sound/soc/rockchip/rk3288_hdmi_analog.c b/sound/soc/rockchip/rk3288_hdmi_analog.c
index 767700c3..0107815 100644
--- a/sound/soc/rockchip/rk3288_hdmi_analog.c
+++ b/sound/soc/rockchip/rk3288_hdmi_analog.c
@@ -67,8 +67,8 @@ static int rk_hw_params(struct snd_pcm_substream *substream,
 {
 	int ret = 0;
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	int mclk;
 
 	switch (params_rate(params)) {
diff --git a/sound/soc/rockchip/rk3399_gru_sound.c b/sound/soc/rockchip/rk3399_gru_sound.c
index d951100..f45e5aa 100644
--- a/sound/soc/rockchip/rk3399_gru_sound.c
+++ b/sound/soc/rockchip/rk3399_gru_sound.c
@@ -57,7 +57,7 @@ static int rockchip_sound_max98357a_hw_params(struct snd_pcm_substream *substrea
 
 	mclk = params_rate(params) * SOUND_FS;
 
-	ret = snd_soc_dai_set_sysclk(rtd->cpu_dai, 0, mclk, 0);
+	ret = snd_soc_dai_set_sysclk(asoc_rtd_to_cpu(rtd, 0), 0, mclk, 0);
 	if (ret) {
 		dev_err(rtd->card->dev, "%s() error setting sysclk to %u: %d\n",
 				__func__, mclk, ret);
@@ -71,8 +71,8 @@ static int rockchip_sound_rt5514_hw_params(struct snd_pcm_substream *substream,
 			     struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	unsigned int mclk;
 	int ret;
 
@@ -103,8 +103,8 @@ static int rockchip_sound_da7219_hw_params(struct snd_pcm_substream *substream,
 			     struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	int mclk, ret;
 
 	/* in bypass mode, the mclk has to be one of the frequencies below */
@@ -153,8 +153,8 @@ static int rockchip_sound_da7219_hw_params(struct snd_pcm_substream *substream,
 
 static int rockchip_sound_da7219_init(struct snd_soc_pcm_runtime *rtd)
 {
-	struct snd_soc_component *component = rtd->codec_dais[0]->component;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_component *component = asoc_rtd_to_codec(rtd, 0)->component;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	int ret;
 
 	/* We need default MCLK and PLL settings for the accessory detection */
@@ -206,7 +206,7 @@ static int rockchip_sound_dmic_hw_params(struct snd_pcm_substream *substream,
 
 	mclk = params_rate(params) * SOUND_FS;
 
-	ret = snd_soc_dai_set_sysclk(rtd->cpu_dai, 0, mclk, 0);
+	ret = snd_soc_dai_set_sysclk(asoc_rtd_to_cpu(rtd, 0), 0, mclk, 0);
 	if (ret) {
 		dev_err(rtd->card->dev, "%s() error setting sysclk to %u: %d\n",
 				__func__, mclk, ret);
diff --git a/sound/soc/rockchip/rockchip_max98090.c b/sound/soc/rockchip/rockchip_max98090.c
index 60930fa..1f527d3 100644
--- a/sound/soc/rockchip/rockchip_max98090.c
+++ b/sound/soc/rockchip/rockchip_max98090.c
@@ -146,8 +146,8 @@ static int rk_aif1_hw_params(struct snd_pcm_substream *substream,
 {
 	int ret = 0;
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	int mclk;
 
 	switch (params_rate(params)) {
@@ -227,7 +227,7 @@ static struct snd_soc_jack rk_hdmi_jack;
 static int rk_hdmi_init(struct snd_soc_pcm_runtime *runtime)
 {
 	struct snd_soc_card *card = runtime->card;
-	struct snd_soc_component *component = runtime->codec_dai->component;
+	struct snd_soc_component *component = asoc_rtd_to_codec(runtime, 0)->component;
 	int ret;
 
 	/* enable jack detection */
diff --git a/sound/soc/rockchip/rockchip_rt5645.c b/sound/soc/rockchip/rockchip_rt5645.c
index 26b67b2..0617ccf 100644
--- a/sound/soc/rockchip/rockchip_rt5645.c
+++ b/sound/soc/rockchip/rockchip_rt5645.c
@@ -56,8 +56,8 @@ static int rk_aif1_hw_params(struct snd_pcm_substream *substream,
 {
 	int ret = 0;
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	int mclk;
 
 	switch (params_rate(params)) {
@@ -113,7 +113,7 @@ static int rk_init(struct snd_soc_pcm_runtime *runtime)
 		return ret;
 	}
 
-	return rt5645_set_jack_detect(runtime->codec_dai->component,
+	return rt5645_set_jack_detect(asoc_rtd_to_codec(runtime, 0)->component,
 				     &headset_jack,
 				     &headset_jack,
 				     &headset_jack);
diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
index 1a0b163..112911d 100644
--- a/sound/soc/samsung/Kconfig
+++ b/sound/soc/samsung/Kconfig
@@ -151,7 +151,7 @@
 
 config SND_SOC_BELLS
 	tristate "Audio support for Wolfson Bells"
-	depends on MFD_ARIZONA && I2C && SPI_MASTER
+	depends on MFD_ARIZONA && MFD_WM5102 && MFD_WM5110 && I2C && SPI_MASTER
 	depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST
 	select SND_SAMSUNG_I2S
 	select SND_SOC_WM5102
@@ -204,7 +204,7 @@
 
 config SND_SOC_SAMSUNG_TM2_WM5110
 	tristate "SoC I2S Audio support for WM5110 on TM2 board"
-	depends on SND_SOC_SAMSUNG && MFD_ARIZONA && I2C && SPI_MASTER
+	depends on SND_SOC_SAMSUNG && MFD_ARIZONA && MFD_WM5110 && I2C && SPI_MASTER
 	depends on GPIOLIB || COMPILE_TEST
 	select SND_SOC_MAX98504
 	select SND_SOC_WM5110
diff --git a/sound/soc/samsung/arndale.c b/sound/soc/samsung/arndale.c
index d646029..c81ece7 100644
--- a/sound/soc/samsung/arndale.c
+++ b/sound/soc/samsung/arndale.c
@@ -21,8 +21,8 @@ static int arndale_rt5631_hw_params(struct snd_pcm_substream *substream,
 				    struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	int rfs, ret;
 	unsigned long rclk;
 
@@ -56,7 +56,7 @@ static int arndale_wm1811_hw_params(struct snd_pcm_substream *substream,
 				    struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	unsigned int rfs, rclk;
 
 	/* Ensure AIF1CLK is >= 3 MHz for optimal performance */
@@ -174,7 +174,9 @@ static int arndale_audio_probe(struct platform_device *pdev)
 
 	ret = devm_snd_soc_register_card(card->dev, card);
 	if (ret) {
-		dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ret);
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev,
+				"snd_soc_register_card() failed: %d\n", ret);
 		goto err_put_of_nodes;
 	}
 	return 0;
diff --git a/sound/soc/samsung/bells.c b/sound/soc/samsung/bells.c
index 5de6334..8b83f39 100644
--- a/sound/soc/samsung/bells.c
+++ b/sound/soc/samsung/bells.c
@@ -60,7 +60,7 @@ static int bells_set_bias_level(struct snd_soc_card *card,
 	int ret;
 
 	rtd = snd_soc_get_pcm_runtime(card, &card->dai_link[DAI_DSP_CODEC]);
-	codec_dai = rtd->codec_dai;
+	codec_dai = asoc_rtd_to_codec(rtd, 0);
 	component = codec_dai->component;
 
 	if (dapm->dev != codec_dai->dev)
@@ -106,7 +106,7 @@ static int bells_set_bias_level_post(struct snd_soc_card *card,
 	int ret;
 
 	rtd = snd_soc_get_pcm_runtime(card, &card->dai_link[DAI_DSP_CODEC]);
-	codec_dai = rtd->codec_dai;
+	codec_dai = asoc_rtd_to_codec(rtd, 0);
 	component = codec_dai->component;
 
 	if (dapm->dev != codec_dai->dev)
@@ -152,11 +152,11 @@ static int bells_late_probe(struct snd_soc_card *card)
 	int ret;
 
 	rtd = snd_soc_get_pcm_runtime(card, &card->dai_link[DAI_AP_DSP]);
-	wm0010 = rtd->codec_dai->component;
+	wm0010 = asoc_rtd_to_codec(rtd, 0)->component;
 
 	rtd = snd_soc_get_pcm_runtime(card, &card->dai_link[DAI_DSP_CODEC]);
-	component = rtd->codec_dai->component;
-	aif1_dai = rtd->codec_dai;
+	component = asoc_rtd_to_codec(rtd, 0)->component;
+	aif1_dai = asoc_rtd_to_codec(rtd, 0);
 
 	ret = snd_soc_component_set_sysclk(component, ARIZONA_CLK_SYSCLK,
 				       ARIZONA_CLK_SRC_FLL1,
@@ -195,7 +195,7 @@ static int bells_late_probe(struct snd_soc_card *card)
 	}
 
 	rtd = snd_soc_get_pcm_runtime(card, &card->dai_link[DAI_CODEC_CP]);
-	aif2_dai = rtd->cpu_dai;
+	aif2_dai = asoc_rtd_to_cpu(rtd, 0);
 
 	ret = snd_soc_dai_set_sysclk(aif2_dai, ARIZONA_CLK_ASYNCCLK, 0, 0);
 	if (ret != 0) {
@@ -207,8 +207,8 @@ static int bells_late_probe(struct snd_soc_card *card)
 		return 0;
 
 	rtd = snd_soc_get_pcm_runtime(card, &card->dai_link[DAI_CODEC_SUB]);
-	aif3_dai = rtd->cpu_dai;
-	wm9081_dai = rtd->codec_dai;
+	aif3_dai = asoc_rtd_to_cpu(rtd, 0);
+	wm9081_dai = asoc_rtd_to_codec(rtd, 0);
 
 	ret = snd_soc_dai_set_sysclk(aif3_dai, ARIZONA_CLK_SYSCLK, 0, 0);
 	if (ret != 0) {
diff --git a/sound/soc/samsung/h1940_uda1380.c b/sound/soc/samsung/h1940_uda1380.c
index a95c34e..9139a1e 100644
--- a/sound/soc/samsung/h1940_uda1380.c
+++ b/sound/soc/samsung/h1940_uda1380.c
@@ -68,7 +68,7 @@ static int h1940_hw_params(struct snd_pcm_substream *substream,
 				struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	int div;
 	int ret;
 	unsigned int rate = params_rate(params);
diff --git a/sound/soc/samsung/i2s.c b/sound/soc/samsung/i2s.c
index a57bb98..f86e302 100644
--- a/sound/soc/samsung/i2s.c
+++ b/sound/soc/samsung/i2s.c
@@ -932,7 +932,7 @@ static int i2s_trigger(struct snd_pcm_substream *substream,
 	struct samsung_i2s_priv *priv = snd_soc_dai_get_drvdata(dai);
 	int capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE);
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct i2s_dai *i2s = to_info(rtd->cpu_dai);
+	struct i2s_dai *i2s = to_info(asoc_rtd_to_cpu(rtd, 0));
 	unsigned long flags;
 
 	switch (cmd) {
diff --git a/sound/soc/samsung/jive_wm8750.c b/sound/soc/samsung/jive_wm8750.c
index 949d2e0..3089901 100644
--- a/sound/soc/samsung/jive_wm8750.c
+++ b/sound/soc/samsung/jive_wm8750.c
@@ -33,8 +33,8 @@ static int jive_hw_params(struct snd_pcm_substream *substream,
 			  struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	struct s3c_i2sv2_rate_calc div;
 	unsigned int clk = 0;
 	int ret = 0;
diff --git a/sound/soc/samsung/littlemill.c b/sound/soc/samsung/littlemill.c
index 59904f4..f4375c4 100644
--- a/sound/soc/samsung/littlemill.c
+++ b/sound/soc/samsung/littlemill.c
@@ -23,7 +23,7 @@ static int littlemill_set_bias_level(struct snd_soc_card *card,
 	int ret;
 
 	rtd = snd_soc_get_pcm_runtime(card, &card->dai_link[0]);
-	aif1_dai = rtd->codec_dai;
+	aif1_dai = asoc_rtd_to_codec(rtd, 0);
 
 	if (dapm->dev != aif1_dai->dev)
 		return 0;
@@ -70,7 +70,7 @@ static int littlemill_set_bias_level_post(struct snd_soc_card *card,
 	int ret;
 
 	rtd = snd_soc_get_pcm_runtime(card, &card->dai_link[0]);
-	aif1_dai = rtd->codec_dai;
+	aif1_dai = asoc_rtd_to_codec(rtd, 0);
 
 	if (dapm->dev != aif1_dai->dev)
 		return 0;
@@ -105,7 +105,7 @@ static int littlemill_hw_params(struct snd_pcm_substream *substream,
 				struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	int ret;
 
 	sample_rate = params_rate(params);
@@ -181,7 +181,7 @@ static int bbclk_ev(struct snd_soc_dapm_widget *w,
 	int ret;
 
 	rtd = snd_soc_get_pcm_runtime(card, &card->dai_link[1]);
-	aif2_dai = rtd->cpu_dai;
+	aif2_dai = asoc_rtd_to_cpu(rtd, 0);
 
 	switch (event) {
 	case SND_SOC_DAPM_PRE_PMU:
@@ -264,11 +264,11 @@ static int littlemill_late_probe(struct snd_soc_card *card)
 	int ret;
 
 	rtd = snd_soc_get_pcm_runtime(card, &card->dai_link[0]);
-	component = rtd->codec_dai->component;
-	aif1_dai = rtd->codec_dai;
+	component = asoc_rtd_to_codec(rtd, 0)->component;
+	aif1_dai = asoc_rtd_to_codec(rtd, 0);
 
 	rtd = snd_soc_get_pcm_runtime(card, &card->dai_link[1]);
-	aif2_dai = rtd->cpu_dai;
+	aif2_dai = asoc_rtd_to_cpu(rtd, 0);
 
 	ret = snd_soc_dai_set_sysclk(aif1_dai, WM8994_SYSCLK_MCLK2,
 				     32768, SND_SOC_CLOCK_IN);
@@ -325,7 +325,7 @@ static int littlemill_probe(struct platform_device *pdev)
 	card->dev = &pdev->dev;
 
 	ret = devm_snd_soc_register_card(&pdev->dev, card);
-	if (ret)
+	if (ret && ret != -EPROBE_DEFER)
 		dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n",
 			ret);
 
diff --git a/sound/soc/samsung/lowland.c b/sound/soc/samsung/lowland.c
index 098eefc..998d10c 100644
--- a/sound/soc/samsung/lowland.c
+++ b/sound/soc/samsung/lowland.c
@@ -32,7 +32,7 @@ static struct snd_soc_jack_pin lowland_headset_pins[] = {
 
 static int lowland_wm5100_init(struct snd_soc_pcm_runtime *rtd)
 {
-	struct snd_soc_component *component = rtd->codec_dai->component;
+	struct snd_soc_component *component = asoc_rtd_to_codec(rtd, 0)->component;
 	int ret;
 
 	ret = snd_soc_component_set_sysclk(component, WM5100_CLK_SYSCLK,
@@ -65,7 +65,7 @@ static int lowland_wm5100_init(struct snd_soc_pcm_runtime *rtd)
 
 static int lowland_wm9081_init(struct snd_soc_pcm_runtime *rtd)
 {
-	struct snd_soc_component *component = rtd->codec_dai->component;
+	struct snd_soc_component *component = asoc_rtd_to_codec(rtd, 0)->component;
 
 	snd_soc_dapm_nc_pin(&rtd->card->dapm, "LINEOUT");
 
@@ -183,7 +183,7 @@ static int lowland_probe(struct platform_device *pdev)
 	card->dev = &pdev->dev;
 
 	ret = devm_snd_soc_register_card(&pdev->dev, card);
-	if (ret)
+	if (ret && ret != -EPROBE_DEFER)
 		dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n",
 			ret);
 
diff --git a/sound/soc/samsung/neo1973_wm8753.c b/sound/soc/samsung/neo1973_wm8753.c
index 1339e41..b7ce1da 100644
--- a/sound/soc/samsung/neo1973_wm8753.c
+++ b/sound/soc/samsung/neo1973_wm8753.c
@@ -26,8 +26,8 @@ static int neo1973_hifi_hw_params(struct snd_pcm_substream *substream,
 	struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	unsigned int pll_out = 0, bclk = 0;
 	int ret = 0;
 	unsigned long iis_clkrate;
@@ -100,7 +100,7 @@ static int neo1973_hifi_hw_params(struct snd_pcm_substream *substream,
 static int neo1973_hifi_hw_free(struct snd_pcm_substream *substream)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 
 	/* disable the PLL */
 	return snd_soc_dai_set_pll(codec_dai, WM8753_PLL1, 0, 0, 0);
@@ -118,7 +118,7 @@ static int neo1973_voice_hw_params(struct snd_pcm_substream *substream,
 	struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	unsigned int pcmdiv = 0;
 	int ret = 0;
 	unsigned long iis_clkrate;
@@ -155,7 +155,7 @@ static int neo1973_voice_hw_params(struct snd_pcm_substream *substream,
 static int neo1973_voice_hw_free(struct snd_pcm_substream *substream)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 
 	/* disable the PLL */
 	return snd_soc_dai_set_pll(codec_dai, WM8753_PLL2, 0, 0, 0);
diff --git a/sound/soc/samsung/odroid.c b/sound/soc/samsung/odroid.c
index f0f5fa9c..6eda5af 100644
--- a/sound/soc/samsung/odroid.c
+++ b/sound/soc/samsung/odroid.c
@@ -98,7 +98,7 @@ static int odroid_card_be_hw_params(struct snd_pcm_substream *substream,
 		return ret;
 
 	if (rtd->num_codecs > 1) {
-		struct snd_soc_dai *codec_dai = rtd->codec_dais[1];
+		struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 1);
 
 		ret = snd_soc_dai_set_sysclk(codec_dai, 0, rclk_freq,
 					     SND_SOC_CLOCK_IN);
@@ -311,7 +311,9 @@ static int odroid_audio_probe(struct platform_device *pdev)
 
 	ret = devm_snd_soc_register_card(dev, card);
 	if (ret < 0) {
-		dev_err(dev, "snd_soc_register_card() failed: %d\n", ret);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "snd_soc_register_card() failed: %d\n",
+				ret);
 		goto err_put_clk_i2s;
 	}
 
diff --git a/sound/soc/samsung/pcm.c b/sound/soc/samsung/pcm.c
index f6e67d0..a5b1a12 100644
--- a/sound/soc/samsung/pcm.c
+++ b/sound/soc/samsung/pcm.c
@@ -212,7 +212,7 @@ static int s3c_pcm_trigger(struct snd_pcm_substream *substream, int cmd,
 			       struct snd_soc_dai *dai)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct s3c_pcm_info *pcm = snd_soc_dai_get_drvdata(rtd->cpu_dai);
+	struct s3c_pcm_info *pcm = snd_soc_dai_get_drvdata(asoc_rtd_to_cpu(rtd, 0));
 	unsigned long flags;
 
 	dev_dbg(pcm->dev, "Entered %s\n", __func__);
@@ -256,7 +256,7 @@ static int s3c_pcm_hw_params(struct snd_pcm_substream *substream,
 				 struct snd_soc_dai *socdai)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct s3c_pcm_info *pcm = snd_soc_dai_get_drvdata(rtd->cpu_dai);
+	struct s3c_pcm_info *pcm = snd_soc_dai_get_drvdata(asoc_rtd_to_cpu(rtd, 0));
 	void __iomem *regs = pcm->regs;
 	struct clk *clk;
 	int sclk_div, sync_div;
diff --git a/sound/soc/samsung/rx1950_uda1380.c b/sound/soc/samsung/rx1950_uda1380.c
index 4b247e9..3afe63c 100644
--- a/sound/soc/samsung/rx1950_uda1380.c
+++ b/sound/soc/samsung/rx1950_uda1380.c
@@ -149,7 +149,7 @@ static int rx1950_hw_params(struct snd_pcm_substream *substream,
 				struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	int div;
 	int ret;
 	unsigned int rate = params_rate(params);
diff --git a/sound/soc/samsung/s3c-i2s-v2.c b/sound/soc/samsung/s3c-i2s-v2.c
index 593be1b..3588878 100644
--- a/sound/soc/samsung/s3c-i2s-v2.c
+++ b/sound/soc/samsung/s3c-i2s-v2.c
@@ -380,7 +380,7 @@ static int s3c2412_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
 			       struct snd_soc_dai *dai)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct s3c_i2sv2_info *i2s = to_info(rtd->cpu_dai);
+	struct s3c_i2sv2_info *i2s = to_info(asoc_rtd_to_cpu(rtd, 0));
 	int capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE);
 	unsigned long irqs;
 	int ret = 0;
diff --git a/sound/soc/samsung/s3c24xx_simtec.c b/sound/soc/samsung/s3c24xx_simtec.c
index 4543705..fd2a4da 100644
--- a/sound/soc/samsung/s3c24xx_simtec.c
+++ b/sound/soc/samsung/s3c24xx_simtec.c
@@ -160,8 +160,8 @@ static int simtec_hw_params(struct snd_pcm_substream *substream,
 			    struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	int ret;
 
 	ret = snd_soc_dai_set_sysclk(codec_dai, 0,
diff --git a/sound/soc/samsung/s3c24xx_uda134x.c b/sound/soc/samsung/s3c24xx_uda134x.c
index 55d2a80..abb5c47 100644
--- a/sound/soc/samsung/s3c24xx_uda134x.c
+++ b/sound/soc/samsung/s3c24xx_uda134x.c
@@ -51,7 +51,7 @@ static int s3c24xx_uda134x_startup(struct snd_pcm_substream *substream)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct s3c24xx_uda134x *priv = snd_soc_card_get_drvdata(rtd->card);
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	int ret = 0;
 
 	mutex_lock(&priv->clk_lock);
@@ -119,8 +119,8 @@ static int s3c24xx_uda134x_hw_params(struct snd_pcm_substream *substream,
 					struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	unsigned int clk = 0;
 	int ret = 0;
 	int clk_source, fs_mode;
diff --git a/sound/soc/samsung/smartq_wm8987.c b/sound/soc/samsung/smartq_wm8987.c
index fab3db9..36bef13 100644
--- a/sound/soc/samsung/smartq_wm8987.c
+++ b/sound/soc/samsung/smartq_wm8987.c
@@ -25,8 +25,8 @@ static int smartq_hifi_hw_params(struct snd_pcm_substream *substream,
 	struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	unsigned int clk = 0;
 	int ret;
 
diff --git a/sound/soc/samsung/smdk_spdif.c b/sound/soc/samsung/smdk_spdif.c
index 4baef84..776a270 100644
--- a/sound/soc/samsung/smdk_spdif.c
+++ b/sound/soc/samsung/smdk_spdif.c
@@ -101,7 +101,7 @@ static int smdk_hw_params(struct snd_pcm_substream *substream,
 		struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	unsigned long pll_out, rclk_rate;
 	int ret, ratio;
 
diff --git a/sound/soc/samsung/smdk_wm8580.c b/sound/soc/samsung/smdk_wm8580.c
index d096ff9..02074c3 100644
--- a/sound/soc/samsung/smdk_wm8580.c
+++ b/sound/soc/samsung/smdk_wm8580.c
@@ -23,7 +23,7 @@ static int smdk_hw_params(struct snd_pcm_substream *substream,
 	struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	unsigned int pll_out;
 	int rfs, ret;
 
diff --git a/sound/soc/samsung/smdk_wm8994.c b/sound/soc/samsung/smdk_wm8994.c
index 28f8be0..a9f345f 100644
--- a/sound/soc/samsung/smdk_wm8994.c
+++ b/sound/soc/samsung/smdk_wm8994.c
@@ -45,7 +45,7 @@ static int smdk_hw_params(struct snd_pcm_substream *substream,
 	struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	unsigned int pll_out;
 	int ret;
 
@@ -178,7 +178,7 @@ static int smdk_audio_probe(struct platform_device *pdev)
 
 	ret = devm_snd_soc_register_card(&pdev->dev, card);
 
-	if (ret)
+	if (ret && ret != -EPROBE_DEFER)
 		dev_err(&pdev->dev, "snd_soc_register_card() failed:%d\n", ret);
 
 	return ret;
diff --git a/sound/soc/samsung/smdk_wm8994pcm.c b/sound/soc/samsung/smdk_wm8994pcm.c
index 2e3dc73..746930dd 100644
--- a/sound/soc/samsung/smdk_wm8994pcm.c
+++ b/sound/soc/samsung/smdk_wm8994pcm.c
@@ -44,8 +44,8 @@ static int smdk_wm8994_pcm_hw_params(struct snd_pcm_substream *substream,
 			      struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	unsigned long mclk_freq;
 	int rfs, ret;
 
@@ -118,7 +118,7 @@ static int snd_smdk_probe(struct platform_device *pdev)
 
 	smdk_pcm.dev = &pdev->dev;
 	ret = devm_snd_soc_register_card(&pdev->dev, &smdk_pcm);
-	if (ret)
+	if (ret && ret != -EPROBE_DEFER)
 		dev_err(&pdev->dev, "snd_soc_register_card failed %d\n", ret);
 
 	return ret;
diff --git a/sound/soc/samsung/snow.c b/sound/soc/samsung/snow.c
index f075aae..40c5de8 100644
--- a/sound/soc/samsung/snow.c
+++ b/sound/soc/samsung/snow.c
@@ -110,9 +110,9 @@ static int snow_late_probe(struct snd_soc_card *card)
 
 	/* In the multi-codec case codec_dais 0 is MAX98095 and 1 is HDMI. */
 	if (rtd->num_codecs > 1)
-		codec_dai = rtd->codec_dais[0];
+		codec_dai = asoc_rtd_to_codec(rtd, 0);
 	else
-		codec_dai = rtd->codec_dai;
+		codec_dai = asoc_rtd_to_codec(rtd, 0);
 
 	/* Set the MCLK rate for the codec */
 	return snd_soc_dai_set_sysclk(codec_dai, 0,
@@ -216,7 +216,9 @@ static int snow_probe(struct platform_device *pdev)
 
 	ret = devm_snd_soc_register_card(dev, card);
 	if (ret) {
-		dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", ret);
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev,
+				"snd_soc_register_card failed (%d)\n", ret);
 		return ret;
 	}
 
diff --git a/sound/soc/samsung/spdif.c b/sound/soc/samsung/spdif.c
index 1a9f08a..759fc66 100644
--- a/sound/soc/samsung/spdif.c
+++ b/sound/soc/samsung/spdif.c
@@ -142,7 +142,7 @@ static int spdif_trigger(struct snd_pcm_substream *substream, int cmd,
 				struct snd_soc_dai *dai)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct samsung_spdif_info *spdif = to_info(rtd->cpu_dai);
+	struct samsung_spdif_info *spdif = to_info(asoc_rtd_to_cpu(rtd, 0));
 	unsigned long flags;
 
 	dev_dbg(spdif->dev, "Entered %s\n", __func__);
@@ -178,7 +178,7 @@ static int spdif_hw_params(struct snd_pcm_substream *substream,
 				struct snd_soc_dai *socdai)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct samsung_spdif_info *spdif = to_info(rtd->cpu_dai);
+	struct samsung_spdif_info *spdif = to_info(asoc_rtd_to_cpu(rtd, 0));
 	void __iomem *regs = spdif->regs;
 	struct snd_dmaengine_dai_dma_data *dma_data;
 	u32 con, clkcon, cstas;
@@ -194,7 +194,7 @@ static int spdif_hw_params(struct snd_pcm_substream *substream,
 		return -EINVAL;
 	}
 
-	snd_soc_dai_set_dma_data(rtd->cpu_dai, substream, dma_data);
+	snd_soc_dai_set_dma_data(asoc_rtd_to_cpu(rtd, 0), substream, dma_data);
 
 	spin_lock_irqsave(&spdif->lock, flags);
 
@@ -280,7 +280,7 @@ static void spdif_shutdown(struct snd_pcm_substream *substream,
 				struct snd_soc_dai *dai)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct samsung_spdif_info *spdif = to_info(rtd->cpu_dai);
+	struct samsung_spdif_info *spdif = to_info(asoc_rtd_to_cpu(rtd, 0));
 	void __iomem *regs = spdif->regs;
 	u32 con, clkcon;
 
diff --git a/sound/soc/samsung/speyside.c b/sound/soc/samsung/speyside.c
index ea0d1ec..f5f6ba0 100644
--- a/sound/soc/samsung/speyside.c
+++ b/sound/soc/samsung/speyside.c
@@ -25,7 +25,7 @@ static int speyside_set_bias_level(struct snd_soc_card *card,
 	int ret;
 
 	rtd = snd_soc_get_pcm_runtime(card, &card->dai_link[1]);
-	codec_dai = rtd->codec_dai;
+	codec_dai = asoc_rtd_to_codec(rtd, 0);
 
 	if (dapm->dev != codec_dai->dev)
 		return 0;
@@ -61,7 +61,7 @@ static int speyside_set_bias_level_post(struct snd_soc_card *card,
 	int ret;
 
 	rtd = snd_soc_get_pcm_runtime(card, &card->dai_link[1]);
-	codec_dai = rtd->codec_dai;
+	codec_dai = asoc_rtd_to_codec(rtd, 0);
 
 	if (dapm->dev != codec_dai->dev)
 		return 0;
@@ -131,7 +131,7 @@ static void speyside_set_polarity(struct snd_soc_component *component,
 
 static int speyside_wm0010_init(struct snd_soc_pcm_runtime *rtd)
 {
-	struct snd_soc_dai *dai = rtd->codec_dai;
+	struct snd_soc_dai *dai = asoc_rtd_to_codec(rtd, 0);
 	int ret;
 
 	ret = snd_soc_dai_set_sysclk(dai, 0, MCLK_AUDIO_RATE, 0);
@@ -143,7 +143,7 @@ static int speyside_wm0010_init(struct snd_soc_pcm_runtime *rtd)
 
 static int speyside_wm8996_init(struct snd_soc_pcm_runtime *rtd)
 {
-	struct snd_soc_dai *dai = rtd->codec_dai;
+	struct snd_soc_dai *dai = asoc_rtd_to_codec(rtd, 0);
 	struct snd_soc_component *component = dai->component;
 	int ret;
 
@@ -330,7 +330,7 @@ static int speyside_probe(struct platform_device *pdev)
 	card->dev = &pdev->dev;
 
 	ret = devm_snd_soc_register_card(&pdev->dev, card);
-	if (ret)
+	if (ret && ret != -EPROBE_DEFER)
 		dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n",
 			ret);
 
diff --git a/sound/soc/samsung/tm2_wm5110.c b/sound/soc/samsung/tm2_wm5110.c
index 10ff14b8..6dfd540 100644
--- a/sound/soc/samsung/tm2_wm5110.c
+++ b/sound/soc/samsung/tm2_wm5110.c
@@ -93,7 +93,7 @@ static int tm2_aif1_hw_params(struct snd_pcm_substream *substream,
 				struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_component *component = rtd->codec_dai->component;
+	struct snd_soc_component *component = asoc_rtd_to_codec(rtd, 0)->component;
 	struct tm2_machine_priv *priv = snd_soc_card_get_drvdata(rtd->card);
 
 	switch (params_rate(params)) {
@@ -134,7 +134,7 @@ static int tm2_aif2_hw_params(struct snd_pcm_substream *substream,
 				struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_component *component = rtd->codec_dai->component;
+	struct snd_soc_component *component = asoc_rtd_to_codec(rtd, 0)->component;
 	unsigned int asyncclk_rate;
 	int ret;
 
@@ -188,7 +188,7 @@ static int tm2_aif2_hw_params(struct snd_pcm_substream *substream,
 static int tm2_aif2_hw_free(struct snd_pcm_substream *substream)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_component *component = rtd->codec_dai->component;
+	struct snd_soc_component *component = asoc_rtd_to_codec(rtd, 0)->component;
 	int ret;
 
 	/* disable FLL2 */
@@ -209,7 +209,7 @@ static int tm2_hdmi_hw_params(struct snd_pcm_substream *substream,
 			      struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	unsigned int bfs;
 	int bitwidth, ret;
 
@@ -284,7 +284,7 @@ static int tm2_set_bias_level(struct snd_soc_card *card,
 
 	rtd = snd_soc_get_pcm_runtime(card, &card->dai_link[0]);
 
-	if (dapm->dev != rtd->codec_dai->dev)
+	if (dapm->dev != asoc_rtd_to_codec(rtd, 0)->dev)
 		return 0;
 
 	switch (level) {
@@ -315,8 +315,8 @@ static int tm2_late_probe(struct snd_soc_card *card)
 	int ret;
 
 	rtd = snd_soc_get_pcm_runtime(card, &card->dai_link[TM2_DAI_AIF1]);
-	aif1_dai = rtd->codec_dai;
-	priv->component = rtd->codec_dai->component;
+	aif1_dai = asoc_rtd_to_codec(rtd, 0);
+	priv->component = asoc_rtd_to_codec(rtd, 0)->component;
 
 	ret = snd_soc_dai_set_sysclk(aif1_dai, ARIZONA_CLK_SYSCLK, 0, 0);
 	if (ret < 0) {
@@ -325,7 +325,7 @@ static int tm2_late_probe(struct snd_soc_card *card)
 	}
 
 	rtd = snd_soc_get_pcm_runtime(card, &card->dai_link[TM2_DAI_AIF2]);
-	aif2_dai = rtd->codec_dai;
+	aif2_dai = asoc_rtd_to_codec(rtd, 0);
 
 	ret = snd_soc_dai_set_sysclk(aif2_dai, ARIZONA_CLK_ASYNCCLK, 0, 0);
 	if (ret < 0) {
@@ -611,7 +611,8 @@ static int tm2_probe(struct platform_device *pdev)
 
 	ret = devm_snd_soc_register_card(dev, card);
 	if (ret < 0) {
-		dev_err(dev, "Failed to register card: %d\n", ret);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "Failed to register card: %d\n", ret);
 		goto dai_node_put;
 	}
 
diff --git a/sound/soc/samsung/tobermory.c b/sound/soc/samsung/tobermory.c
index fdce28c..c962d2c 100644
--- a/sound/soc/samsung/tobermory.c
+++ b/sound/soc/samsung/tobermory.c
@@ -23,7 +23,7 @@ static int tobermory_set_bias_level(struct snd_soc_card *card,
 	int ret;
 
 	rtd = snd_soc_get_pcm_runtime(card, &card->dai_link[0]);
-	codec_dai = rtd->codec_dai;
+	codec_dai = asoc_rtd_to_codec(rtd, 0);
 
 	if (dapm->dev != codec_dai->dev)
 		return 0;
@@ -66,7 +66,7 @@ static int tobermory_set_bias_level_post(struct snd_soc_card *card,
 	int ret;
 
 	rtd = snd_soc_get_pcm_runtime(card, &card->dai_link[0]);
-	codec_dai = rtd->codec_dai;
+	codec_dai = asoc_rtd_to_codec(rtd, 0);
 
 	if (dapm->dev != codec_dai->dev)
 		return 0;
@@ -181,8 +181,8 @@ static int tobermory_late_probe(struct snd_soc_card *card)
 	int ret;
 
 	rtd = snd_soc_get_pcm_runtime(card, &card->dai_link[0]);
-	component = rtd->codec_dai->component;
-	codec_dai = rtd->codec_dai;
+	component = asoc_rtd_to_codec(rtd, 0)->component;
+	codec_dai = asoc_rtd_to_codec(rtd, 0);
 
 	ret = snd_soc_dai_set_sysclk(codec_dai, WM8962_SYSCLK_MCLK,
 				     32768, SND_SOC_CLOCK_IN);
@@ -229,7 +229,7 @@ static int tobermory_probe(struct platform_device *pdev)
 	card->dev = &pdev->dev;
 
 	ret = devm_snd_soc_register_card(&pdev->dev, card);
-	if (ret)
+	if (ret && ret != -EPROBE_DEFER)
 		dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n",
 			ret);
 
diff --git a/sound/soc/sh/dma-sh7760.c b/sound/soc/sh/dma-sh7760.c
index eee1a1e..a35de78 100644
--- a/sound/soc/sh/dma-sh7760.c
+++ b/sound/soc/sh/dma-sh7760.c
@@ -119,7 +119,7 @@ static int camelot_pcm_open(struct snd_soc_component *component,
 			    struct snd_pcm_substream *substream)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct camelot_pcm *cam = &cam_pcm_data[rtd->cpu_dai->id];
+	struct camelot_pcm *cam = &cam_pcm_data[asoc_rtd_to_cpu(rtd, 0)->id];
 	int recv = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0:1;
 	int ret, dmairq;
 
@@ -132,7 +132,7 @@ static int camelot_pcm_open(struct snd_soc_component *component,
 		ret = dmabrg_request_irq(dmairq, camelot_rxdma, cam);
 		if (unlikely(ret)) {
 			pr_debug("audio unit %d irqs already taken!\n",
-			     rtd->cpu_dai->id);
+			     asoc_rtd_to_cpu(rtd, 0)->id);
 			return -EBUSY;
 		}
 		(void)dmabrg_request_irq(dmairq + 1,camelot_rxdma, cam);
@@ -141,7 +141,7 @@ static int camelot_pcm_open(struct snd_soc_component *component,
 		ret = dmabrg_request_irq(dmairq, camelot_txdma, cam);
 		if (unlikely(ret)) {
 			pr_debug("audio unit %d irqs already taken!\n",
-			     rtd->cpu_dai->id);
+			     asoc_rtd_to_cpu(rtd, 0)->id);
 			return -EBUSY;
 		}
 		(void)dmabrg_request_irq(dmairq + 1, camelot_txdma, cam);
@@ -153,7 +153,7 @@ static int camelot_pcm_close(struct snd_soc_component *component,
 			     struct snd_pcm_substream *substream)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct camelot_pcm *cam = &cam_pcm_data[rtd->cpu_dai->id];
+	struct camelot_pcm *cam = &cam_pcm_data[asoc_rtd_to_cpu(rtd, 0)->id];
 	int recv = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0:1;
 	int dmairq;
 
@@ -175,7 +175,7 @@ static int camelot_hw_params(struct snd_soc_component *component,
 			     struct snd_pcm_hw_params *hw_params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct camelot_pcm *cam = &cam_pcm_data[rtd->cpu_dai->id];
+	struct camelot_pcm *cam = &cam_pcm_data[asoc_rtd_to_cpu(rtd, 0)->id];
 	int recv = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0:1;
 	int ret;
 
@@ -194,7 +194,7 @@ static int camelot_prepare(struct snd_soc_component *component,
 {
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct camelot_pcm *cam = &cam_pcm_data[rtd->cpu_dai->id];
+	struct camelot_pcm *cam = &cam_pcm_data[asoc_rtd_to_cpu(rtd, 0)->id];
 
 	pr_debug("PCM data: addr 0x%08lx len %d\n",
 		 (u32)runtime->dma_addr, runtime->dma_bytes);
@@ -242,7 +242,7 @@ static int camelot_trigger(struct snd_soc_component *component,
 			   struct snd_pcm_substream *substream, int cmd)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct camelot_pcm *cam = &cam_pcm_data[rtd->cpu_dai->id];
+	struct camelot_pcm *cam = &cam_pcm_data[asoc_rtd_to_cpu(rtd, 0)->id];
 	int recv = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0:1;
 
 	switch (cmd) {
@@ -270,7 +270,7 @@ static snd_pcm_uframes_t camelot_pos(struct snd_soc_component *component,
 {
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct camelot_pcm *cam = &cam_pcm_data[rtd->cpu_dai->id];
+	struct camelot_pcm *cam = &cam_pcm_data[asoc_rtd_to_cpu(rtd, 0)->id];
 	int recv = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0:1;
 	unsigned long pos;
 
diff --git a/sound/soc/sh/fsi.c b/sound/soc/sh/fsi.c
index 4b35ef4..1c3c4fd 100644
--- a/sound/soc/sh/fsi.c
+++ b/sound/soc/sh/fsi.c
@@ -408,7 +408,7 @@ static struct snd_soc_dai *fsi_get_dai(struct snd_pcm_substream *substream)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 
-	return  rtd->cpu_dai;
+	return  asoc_rtd_to_cpu(rtd, 0);
 }
 
 static struct fsi_priv *fsi_get_priv_frm_dai(struct snd_soc_dai *dai)
@@ -1938,8 +1938,7 @@ static int fsi_probe(struct platform_device *pdev)
 	if (!master)
 		return -ENOMEM;
 
-	master->base = devm_ioremap(&pdev->dev,
-					    res->start, resource_size(res));
+	master->base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
 	if (!master->base) {
 		dev_err(&pdev->dev, "Unable to ioremap FSI registers.\n");
 		return -ENXIO;
diff --git a/sound/soc/sh/migor.c b/sound/soc/sh/migor.c
index 991557e..d5702fb 100644
--- a/sound/soc/sh/migor.c
+++ b/sound/soc/sh/migor.c
@@ -46,7 +46,7 @@ static int migor_hw_params(struct snd_pcm_substream *substream,
 			   struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	int ret;
 	unsigned int rate = params_rate(params);
 
@@ -67,7 +67,7 @@ static int migor_hw_params(struct snd_pcm_substream *substream,
 	clk_set_rate(&siumckb_clk, codec_freq);
 	dev_dbg(codec_dai->dev, "%s: configure %luHz\n", __func__, codec_freq);
 
-	ret = snd_soc_dai_set_sysclk(rtd->cpu_dai, SIU_CLKB_EXT,
+	ret = snd_soc_dai_set_sysclk(asoc_rtd_to_cpu(rtd, 0), SIU_CLKB_EXT,
 				     codec_freq / 2, SND_SOC_CLOCK_IN);
 
 	if (!ret)
@@ -79,7 +79,7 @@ static int migor_hw_params(struct snd_pcm_substream *substream,
 static int migor_hw_free(struct snd_pcm_substream *substream)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 
 	if (use_count) {
 		use_count--;
diff --git a/sound/soc/sh/rcar/core.c b/sound/soc/sh/rcar/core.c
index 0bfcb77..4349f2f 100644
--- a/sound/soc/sh/rcar/core.c
+++ b/sound/soc/sh/rcar/core.c
@@ -696,7 +696,7 @@ struct snd_soc_dai *rsnd_substream_to_dai(struct snd_pcm_substream *substream)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 
-	return  rtd->cpu_dai;
+	return  asoc_rtd_to_cpu(rtd, 0);
 }
 
 static
diff --git a/sound/soc/soc-compress.c b/sound/soc/soc-compress.c
index 392a1c5..50062eb 100644
--- a/sound/soc/soc-compress.c
+++ b/sound/soc/soc-compress.c
@@ -810,9 +810,10 @@ int snd_soc_new_compress(struct snd_soc_pcm_runtime *rtd, int num)
 	int playback = 0, capture = 0;
 	int i;
 
-	if (rtd->num_codecs > 1) {
+	if (rtd->num_cpus > 1 ||
+	    rtd->num_codecs > 1) {
 		dev_err(rtd->card->dev,
-			"Compress ASoC: Multicodec not supported\n");
+			"Compress ASoC: Multi CPU/Codec not supported\n");
 		return -EINVAL;
 	}
 
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index 068d809..843b8b1 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -365,19 +365,20 @@ EXPORT_SYMBOL_GPL(snd_soc_get_pcm_runtime);
 void snd_soc_close_delayed_work(struct snd_soc_pcm_runtime *rtd)
 {
 	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	int playback = SNDRV_PCM_STREAM_PLAYBACK;
 
 	mutex_lock_nested(&rtd->card->pcm_mutex, rtd->card->pcm_subclass);
 
 	dev_dbg(rtd->dev,
 		"ASoC: pop wq checking: %s status: %s waiting: %s\n",
 		codec_dai->driver->playback.stream_name,
-		codec_dai->playback_active ? "active" : "inactive",
+		codec_dai->stream_active[playback] ? "active" : "inactive",
 		rtd->pop_wait ? "yes" : "no");
 
 	/* are we waiting on this codec DAI stream */
 	if (rtd->pop_wait == 1) {
 		rtd->pop_wait = 0;
-		snd_soc_dapm_stream_event(rtd, SNDRV_PCM_STREAM_PLAYBACK,
+		snd_soc_dapm_stream_event(rtd, playback,
 					  SND_SOC_DAPM_STREAM_STOP);
 	}
 
@@ -431,6 +432,7 @@ static struct snd_soc_pcm_runtime *soc_new_pcm_runtime(
 	struct snd_soc_component *component;
 	struct device *dev;
 	int ret;
+	int stream;
 
 	/*
 	 * for rtd->dev
@@ -465,23 +467,31 @@ static struct snd_soc_pcm_runtime *soc_new_pcm_runtime(
 
 	rtd->dev = dev;
 	INIT_LIST_HEAD(&rtd->list);
-	INIT_LIST_HEAD(&rtd->dpcm[SNDRV_PCM_STREAM_PLAYBACK].be_clients);
-	INIT_LIST_HEAD(&rtd->dpcm[SNDRV_PCM_STREAM_CAPTURE].be_clients);
-	INIT_LIST_HEAD(&rtd->dpcm[SNDRV_PCM_STREAM_PLAYBACK].fe_clients);
-	INIT_LIST_HEAD(&rtd->dpcm[SNDRV_PCM_STREAM_CAPTURE].fe_clients);
+	for_each_pcm_streams(stream) {
+		INIT_LIST_HEAD(&rtd->dpcm[stream].be_clients);
+		INIT_LIST_HEAD(&rtd->dpcm[stream].fe_clients);
+	}
 	dev_set_drvdata(dev, rtd);
 	INIT_DELAYED_WORK(&rtd->delayed_work, close_delayed_work);
 
 	/*
-	 * for rtd->codec_dais
+	 * for rtd->dais
 	 */
-	rtd->codec_dais = devm_kcalloc(dev, dai_link->num_codecs,
+	rtd->dais = devm_kcalloc(dev, dai_link->num_cpus + dai_link->num_codecs,
 					sizeof(struct snd_soc_dai *),
 					GFP_KERNEL);
-	if (!rtd->codec_dais)
+	if (!rtd->dais)
 		goto free_rtd;
 
 	/*
+	 * dais = [][][][][][][][][][][][][][][][][][]
+	 *	  ^cpu_dais         ^codec_dais
+	 *	  |--- num_cpus ---|--- num_codecs --|
+	 */
+	rtd->cpu_dais	= &rtd->dais[0];
+	rtd->codec_dais	= &rtd->dais[dai_link->num_cpus];
+
+	/*
 	 * rtd remaining settings
 	 */
 	rtd->card = card;
@@ -514,6 +524,7 @@ int snd_soc_suspend(struct device *dev)
 	struct snd_soc_card *card = dev_get_drvdata(dev);
 	struct snd_soc_component *component;
 	struct snd_soc_pcm_runtime *rtd;
+	int playback = SNDRV_PCM_STREAM_PLAYBACK;
 	int i;
 
 	/* If the card is not initialized yet there is nothing to do */
@@ -536,10 +547,9 @@ int snd_soc_suspend(struct device *dev)
 		if (rtd->dai_link->ignore_suspend)
 			continue;
 
-		for_each_rtd_codec_dai(rtd, i, dai) {
-			if (dai->playback_active)
-				snd_soc_dai_digital_mute(dai, 1,
-						SNDRV_PCM_STREAM_PLAYBACK);
+		for_each_rtd_codec_dais(rtd, i, dai) {
+			if (dai->stream_active[playback])
+				snd_soc_dai_digital_mute(dai, 1, playback);
 		}
 	}
 
@@ -558,17 +568,14 @@ int snd_soc_suspend(struct device *dev)
 	snd_soc_flush_all_delayed_work(card);
 
 	for_each_card_rtds(card, rtd) {
+		int stream;
 
 		if (rtd->dai_link->ignore_suspend)
 			continue;
 
-		snd_soc_dapm_stream_event(rtd,
-					  SNDRV_PCM_STREAM_PLAYBACK,
-					  SND_SOC_DAPM_STREAM_SUSPEND);
-
-		snd_soc_dapm_stream_event(rtd,
-					  SNDRV_PCM_STREAM_CAPTURE,
-					  SND_SOC_DAPM_STREAM_SUSPEND);
+		for_each_pcm_streams(stream)
+			snd_soc_dapm_stream_event(rtd, stream,
+						  SND_SOC_DAPM_STREAM_SUSPEND);
 	}
 
 	/* Recheck all endpoints too, their state is affected by suspend */
@@ -664,30 +671,27 @@ static void soc_resume_deferred(struct work_struct *work)
 	}
 
 	for_each_card_rtds(card, rtd) {
+		int stream;
 
 		if (rtd->dai_link->ignore_suspend)
 			continue;
 
-		snd_soc_dapm_stream_event(rtd,
-					  SNDRV_PCM_STREAM_PLAYBACK,
-					  SND_SOC_DAPM_STREAM_RESUME);
-
-		snd_soc_dapm_stream_event(rtd,
-					  SNDRV_PCM_STREAM_CAPTURE,
-					  SND_SOC_DAPM_STREAM_RESUME);
+		for_each_pcm_streams(stream)
+			snd_soc_dapm_stream_event(rtd, stream,
+						  SND_SOC_DAPM_STREAM_RESUME);
 	}
 
 	/* unmute any active DACs */
 	for_each_card_rtds(card, rtd) {
 		struct snd_soc_dai *dai;
+		int playback = SNDRV_PCM_STREAM_PLAYBACK;
 
 		if (rtd->dai_link->ignore_suspend)
 			continue;
 
-		for_each_rtd_codec_dai(rtd, i, dai) {
-			if (dai->playback_active)
-				snd_soc_dai_digital_mute(dai, 0,
-						SNDRV_PCM_STREAM_PLAYBACK);
+		for_each_rtd_codec_dais(rtd, i, dai) {
+			if (dai->stream_active[playback])
+				snd_soc_dai_digital_mute(dai, 0, playback);
 		}
 	}
 
@@ -837,7 +841,7 @@ static int soc_dai_link_sanity_check(struct snd_soc_card *card,
 				     struct snd_soc_dai_link *link)
 {
 	int i;
-	struct snd_soc_dai_link_component *codec, *platform;
+	struct snd_soc_dai_link_component *cpu, *codec, *platform;
 
 	for_each_link_codecs(link, i, codec) {
 		/*
@@ -886,44 +890,38 @@ static int soc_dai_link_sanity_check(struct snd_soc_card *card,
 			return -EPROBE_DEFER;
 	}
 
-	/* FIXME */
-	if (link->num_cpus > 1) {
-		dev_err(card->dev,
-			"ASoC: multi cpu is not yet supported %s\n",
-			link->name);
-		return -EINVAL;
-	}
+	for_each_link_cpus(link, i, cpu) {
+		/*
+		 * CPU device may be specified by either name or OF node, but
+		 * can be left unspecified, and will be matched based on DAI
+		 * name alone..
+		 */
+		if (cpu->name && cpu->of_node) {
+			dev_err(card->dev,
+				"ASoC: Neither/both cpu name/of_node are set for %s\n",
+				link->name);
+			return -EINVAL;
+		}
 
-	/*
-	 * CPU device may be specified by either name or OF node, but
-	 * can be left unspecified, and will be matched based on DAI
-	 * name alone..
-	 */
-	if (link->cpus->name && link->cpus->of_node) {
-		dev_err(card->dev,
-			"ASoC: Neither/both cpu name/of_node are set for %s\n",
-			link->name);
-		return -EINVAL;
-	}
+		/*
+		 * Defer card registration if cpu dai component is not added to
+		 * component list.
+		 */
+		if ((cpu->of_node || cpu->name) &&
+		    !soc_find_component(cpu))
+			return -EPROBE_DEFER;
 
-	/*
-	 * Defer card registration if cpu dai component is not added to
-	 * component list.
-	 */
-	if ((link->cpus->of_node || link->cpus->name) &&
-	    !soc_find_component(link->cpus))
-		return -EPROBE_DEFER;
-
-	/*
-	 * At least one of CPU DAI name or CPU device name/node must be
-	 * specified
-	 */
-	if (!link->cpus->dai_name &&
-	    !(link->cpus->name || link->cpus->of_node)) {
-		dev_err(card->dev,
-			"ASoC: Neither cpu_dai_name nor cpu_name/of_node are set for %s\n",
-			link->name);
-		return -EINVAL;
+		/*
+		 * At least one of CPU DAI name or CPU device name/node must be
+		 * specified
+		 */
+		if (!cpu->dai_name &&
+		    !(cpu->name || cpu->of_node)) {
+			dev_err(card->dev,
+				"ASoC: Neither cpu_dai_name nor cpu_name/of_node are set for %s\n",
+				link->name);
+			return -EINVAL;
+		}
 	}
 
 	return 0;
@@ -966,7 +964,7 @@ int snd_soc_add_pcm_runtime(struct snd_soc_card *card,
 			    struct snd_soc_dai_link *dai_link)
 {
 	struct snd_soc_pcm_runtime *rtd;
-	struct snd_soc_dai_link_component *codec, *platform;
+	struct snd_soc_dai_link_component *codec, *platform, *cpu;
 	struct snd_soc_component *component;
 	int i, ret;
 
@@ -991,14 +989,19 @@ int snd_soc_add_pcm_runtime(struct snd_soc_card *card,
 	if (!rtd)
 		return -ENOMEM;
 
-	/* FIXME: we need multi CPU support in the future */
-	rtd->cpu_dai = snd_soc_find_dai(dai_link->cpus);
-	if (!rtd->cpu_dai) {
-		dev_info(card->dev, "ASoC: CPU DAI %s not registered\n",
-			 dai_link->cpus->dai_name);
-		goto _err_defer;
+	rtd->num_cpus = dai_link->num_cpus;
+	for_each_link_cpus(dai_link, i, cpu) {
+		rtd->cpu_dais[i] = snd_soc_find_dai(cpu);
+		if (!rtd->cpu_dais[i]) {
+			dev_info(card->dev, "ASoC: CPU DAI %s not registered\n",
+				 cpu->dai_name);
+			goto _err_defer;
+		}
+		snd_soc_rtd_add_component(rtd, rtd->cpu_dais[i]->component);
 	}
-	snd_soc_rtd_add_component(rtd, rtd->cpu_dai->component);
+
+	/* Single cpu links expect cpu and cpu_dai in runtime data */
+	rtd->cpu_dai = rtd->cpu_dais[0];
 
 	/* Find CODEC from registered CODECs */
 	rtd->num_codecs = dai_link->num_codecs;
@@ -1034,20 +1037,20 @@ int snd_soc_add_pcm_runtime(struct snd_soc_card *card,
 }
 EXPORT_SYMBOL_GPL(snd_soc_add_pcm_runtime);
 
-static int soc_dai_pcm_new(struct snd_soc_dai **dais, int num_dais,
-			   struct snd_soc_pcm_runtime *rtd)
+static int soc_dai_pcm_new(struct snd_soc_pcm_runtime *rtd)
 {
+	struct snd_soc_dai *dai;
 	int i, ret = 0;
 
-	for (i = 0; i < num_dais; ++i) {
-		struct snd_soc_dai_driver *drv = dais[i]->driver;
+	for_each_rtd_dais(rtd, i, dai) {
+		struct snd_soc_dai_driver *drv = dai->driver;
 
 		if (drv->pcm_new)
-			ret = drv->pcm_new(rtd, dais[i]);
+			ret = drv->pcm_new(rtd, dai);
 		if (ret < 0) {
-			dev_err(dais[i]->dev,
+			dev_err(dai->dev,
 				"ASoC: Failed to bind %s with pcm device\n",
-				dais[i]->name);
+				dai->name);
 			return ret;
 		}
 	}
@@ -1118,12 +1121,8 @@ static int soc_init_pcm_runtime(struct snd_soc_card *card,
 			dai_link->stream_name, ret);
 		return ret;
 	}
-	ret = soc_dai_pcm_new(&cpu_dai, 1, rtd);
-	if (ret < 0)
-		return ret;
-	ret = soc_dai_pcm_new(rtd->codec_dais,
-			      rtd->num_codecs, rtd);
-	return ret;
+
+	return soc_dai_pcm_new(rtd);
 }
 
 static void soc_set_name_prefix(struct snd_soc_card *card,
@@ -1256,8 +1255,18 @@ static int soc_probe_component(struct snd_soc_card *card,
 	ret = snd_soc_dapm_add_routes(dapm,
 				      component->driver->dapm_routes,
 				      component->driver->num_dapm_routes);
-	if (ret < 0)
-		goto err_probe;
+	if (ret < 0) {
+		if (card->disable_route_checks) {
+			dev_info(card->dev,
+				 "%s: disable_route_checks set, ignoring errors on add_routes\n",
+				 __func__);
+		} else {
+			dev_err(card->dev,
+				"%s: snd_soc_dapm_add_routes failed: %d\n",
+				__func__, ret);
+			goto err_probe;
+		}
+	}
 
 	/* see for_each_card_components */
 	list_add(&component->card_list, &card->component_dev_list);
@@ -1309,24 +1318,22 @@ static int soc_probe_dai(struct snd_soc_dai *dai, int order)
 static void soc_remove_link_dais(struct snd_soc_card *card)
 {
 	int i;
-	struct snd_soc_dai *codec_dai;
+	struct snd_soc_dai *dai;
 	struct snd_soc_pcm_runtime *rtd;
 	int order;
 
 	for_each_comp_order(order) {
 		for_each_card_rtds(card, rtd) {
-			/* remove the CODEC DAI */
-			for_each_rtd_codec_dai(rtd, i, codec_dai)
-				soc_remove_dai(codec_dai, order);
-
-			soc_remove_dai(rtd->cpu_dai, order);
+			/* remove DAIs */
+			for_each_rtd_dais(rtd, i, dai)
+				soc_remove_dai(dai, order);
 		}
 	}
 }
 
 static int soc_probe_link_dais(struct snd_soc_card *card)
 {
-	struct snd_soc_dai *codec_dai;
+	struct snd_soc_dai *dai;
 	struct snd_soc_pcm_runtime *rtd;
 	int i, order, ret;
 
@@ -1337,13 +1344,9 @@ static int soc_probe_link_dais(struct snd_soc_card *card)
 				"ASoC: probe %s dai link %d late %d\n",
 				card->name, rtd->num, order);
 
-			ret = soc_probe_dai(rtd->cpu_dai, order);
-			if (ret)
-				return ret;
-
-			/* probe the CODEC DAI */
-			for_each_rtd_codec_dai(rtd, i, codec_dai) {
-				ret = soc_probe_dai(codec_dai, order);
+			/* probe the CPU DAI */
+			for_each_rtd_dais(rtd, i, dai) {
+				ret = soc_probe_dai(dai, order);
 				if (ret)
 					return ret;
 			}
@@ -1471,12 +1474,13 @@ static void soc_remove_aux_devices(struct snd_soc_card *card)
 int snd_soc_runtime_set_dai_fmt(struct snd_soc_pcm_runtime *rtd,
 	unsigned int dai_fmt)
 {
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *cpu_dai;
 	struct snd_soc_dai *codec_dai;
+	unsigned int inv_dai_fmt;
 	unsigned int i;
 	int ret;
 
-	for_each_rtd_codec_dai(rtd, i, codec_dai) {
+	for_each_rtd_codec_dais(rtd, i, codec_dai) {
 		ret = snd_soc_dai_set_fmt(codec_dai, dai_fmt);
 		if (ret != 0 && ret != -ENOTSUPP) {
 			dev_warn(codec_dai->dev,
@@ -1489,33 +1493,33 @@ int snd_soc_runtime_set_dai_fmt(struct snd_soc_pcm_runtime *rtd,
 	 * Flip the polarity for the "CPU" end of a CODEC<->CODEC link
 	 * the component which has non_legacy_dai_naming is Codec
 	 */
-	if (cpu_dai->component->driver->non_legacy_dai_naming) {
-		unsigned int inv_dai_fmt;
-
-		inv_dai_fmt = dai_fmt & ~SND_SOC_DAIFMT_MASTER_MASK;
-		switch (dai_fmt & SND_SOC_DAIFMT_MASTER_MASK) {
-		case SND_SOC_DAIFMT_CBM_CFM:
-			inv_dai_fmt |= SND_SOC_DAIFMT_CBS_CFS;
-			break;
-		case SND_SOC_DAIFMT_CBM_CFS:
-			inv_dai_fmt |= SND_SOC_DAIFMT_CBS_CFM;
-			break;
-		case SND_SOC_DAIFMT_CBS_CFM:
-			inv_dai_fmt |= SND_SOC_DAIFMT_CBM_CFS;
-			break;
-		case SND_SOC_DAIFMT_CBS_CFS:
-			inv_dai_fmt |= SND_SOC_DAIFMT_CBM_CFM;
-			break;
-		}
-
-		dai_fmt = inv_dai_fmt;
+	inv_dai_fmt = dai_fmt & ~SND_SOC_DAIFMT_MASTER_MASK;
+	switch (dai_fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBM_CFM:
+		inv_dai_fmt |= SND_SOC_DAIFMT_CBS_CFS;
+		break;
+	case SND_SOC_DAIFMT_CBM_CFS:
+		inv_dai_fmt |= SND_SOC_DAIFMT_CBS_CFM;
+		break;
+	case SND_SOC_DAIFMT_CBS_CFM:
+		inv_dai_fmt |= SND_SOC_DAIFMT_CBM_CFS;
+		break;
+	case SND_SOC_DAIFMT_CBS_CFS:
+		inv_dai_fmt |= SND_SOC_DAIFMT_CBM_CFM;
+		break;
 	}
+	for_each_rtd_cpu_dais(rtd, i, cpu_dai) {
+		unsigned int fmt = dai_fmt;
 
-	ret = snd_soc_dai_set_fmt(cpu_dai, dai_fmt);
-	if (ret != 0 && ret != -ENOTSUPP) {
-		dev_warn(cpu_dai->dev,
-			 "ASoC: Failed to set DAI format: %d\n", ret);
-		return ret;
+		if (cpu_dai->component->driver->non_legacy_dai_naming)
+			fmt = inv_dai_fmt;
+
+		ret = snd_soc_dai_set_fmt(cpu_dai, fmt);
+		if (ret != 0 && ret != -ENOTSUPP) {
+			dev_warn(cpu_dai->dev,
+				 "ASoC: Failed to set DAI format: %d\n", ret);
+			return ret;
+		}
 	}
 
 	return 0;
@@ -1938,8 +1942,18 @@ static int snd_soc_bind_card(struct snd_soc_card *card)
 
 	ret = snd_soc_dapm_add_routes(&card->dapm, card->dapm_routes,
 				      card->num_dapm_routes);
-	if (ret < 0)
-		goto probe_end;
+	if (ret < 0) {
+		if (card->disable_route_checks) {
+			dev_info(card->dev,
+				 "%s: disable_route_checks set, ignoring errors on add_routes\n",
+				 __func__);
+		} else {
+			dev_err(card->dev,
+				 "%s: snd_soc_dapm_add_routes failed: %d\n",
+				 __func__, ret);
+			goto probe_end;
+		}
+	}
 
 	ret = snd_soc_dapm_add_routes(&card->dapm, card->of_dapm_routes,
 				      card->num_of_dapm_routes);
@@ -3102,6 +3116,14 @@ int snd_soc_get_dai_name(struct of_phandle_args *args,
 			*dai_name = dai->driver->name;
 			if (!*dai_name)
 				*dai_name = pos->name;
+		} else if (ret) {
+			/*
+			 * if another error than ENOTSUPP is returned go on and
+			 * check if another component is provided with the same
+			 * node. This may happen if a device provides several
+			 * components
+			 */
+			continue;
 		}
 
 		break;
diff --git a/sound/soc/soc-dai.c b/sound/soc/soc-dai.c
index 51031e33..8f3cad8 100644
--- a/sound/soc/soc-dai.c
+++ b/sound/soc/soc-dai.c
@@ -295,17 +295,24 @@ int snd_soc_dai_startup(struct snd_soc_dai *dai,
 {
 	int ret = 0;
 
-	if (dai->driver->ops->startup)
+	if (!dai->started[substream->stream] &&
+	    dai->driver->ops->startup)
 		ret = dai->driver->ops->startup(substream, dai);
 
+	if (ret == 0)
+		dai->started[substream->stream] = 1;
+
 	return ret;
 }
 
 void snd_soc_dai_shutdown(struct snd_soc_dai *dai,
 			 struct snd_pcm_substream *substream)
 {
-	if (dai->driver->ops->shutdown)
+	if (dai->started[substream->stream] &&
+	    dai->driver->ops->shutdown)
 		dai->driver->ops->shutdown(substream, dai);
+
+	dai->started[substream->stream] = 0;
 }
 
 int snd_soc_dai_prepare(struct snd_soc_dai *dai,
@@ -383,12 +390,7 @@ int snd_soc_dai_compress_new(struct snd_soc_dai *dai,
  */
 bool snd_soc_dai_stream_valid(struct snd_soc_dai *dai, int dir)
 {
-	struct snd_soc_pcm_stream *stream;
-
-	if (dir == SNDRV_PCM_STREAM_PLAYBACK)
-		stream = &dai->driver->playback;
-	else
-		stream = &dai->driver->capture;
+	struct snd_soc_pcm_stream *stream = snd_soc_dai_get_pcm_stream(dai, dir);
 
 	/* If the codec specifies any channels at all, it supports the stream */
 	return stream->channels_min;
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index 9fb54e6fe..679ed60 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -302,7 +302,7 @@ void dapm_mark_endpoints_dirty(struct snd_soc_card *card)
 
 	mutex_lock(&card->dapm_mutex);
 
-	list_for_each_entry(w, &card->widgets, list) {
+	for_each_card_widgets(card, w) {
 		if (w->is_ep) {
 			dapm_mark_dirty(w, "Rechecking endpoints");
 			if (w->is_ep & SND_SOC_DAPM_EP_SINK)
@@ -589,7 +589,7 @@ static void dapm_reset(struct snd_soc_card *card)
 
 	memset(&card->dapm_stats, 0, sizeof(card->dapm_stats));
 
-	list_for_each_entry(w, &card->widgets, list) {
+	for_each_card_widgets(card, w) {
 		w->new_power = w->power;
 		w->power_checked = false;
 	}
@@ -802,7 +802,13 @@ static void dapm_set_mixer_path_status(struct snd_soc_dapm_path *p, int i,
 			val = max - val;
 		p->connect = !!val;
 	} else {
-		p->connect = 0;
+		/* since a virtual mixer has no backing registers to
+		 * decide which path to connect, it will try to match
+		 * with initial state.  This is to ensure
+		 * that the default mixer choice will be
+		 * correctly powered up during initialization.
+		 */
+		p->connect = invert;
 	}
 }
 
@@ -833,7 +839,7 @@ static int dapm_is_shared_kcontrol(struct snd_soc_dapm_context *dapm,
 
 	*kcontrol = NULL;
 
-	list_for_each_entry(w, &dapm->card->widgets, list) {
+	for_each_card_widgets(dapm->card, w) {
 		if (w == kcontrolw || w->dapm != kcontrolw->dapm)
 			continue;
 		for (i = 0; i < w->num_kcontrols; i++) {
@@ -1105,6 +1111,11 @@ static int snd_soc_dapm_suspend_check(struct snd_soc_dapm_widget *widget)
 	}
 }
 
+static void dapm_widget_list_free(struct snd_soc_dapm_widget_list **list)
+{
+	kfree(*list);
+}
+
 static int dapm_widget_list_create(struct snd_soc_dapm_widget_list **list,
 	struct list_head *widgets)
 {
@@ -1310,6 +1321,11 @@ int snd_soc_dapm_dai_get_connected_widgets(struct snd_soc_dai *dai, int stream,
 	return paths;
 }
 
+void snd_soc_dapm_dai_free_widgets(struct snd_soc_dapm_widget_list **list)
+{
+	dapm_widget_list_free(list);
+}
+
 /*
  * Handler for regulator supply widget.
  */
@@ -1706,9 +1722,8 @@ static void dapm_seq_run(struct snd_soc_card *card,
 					i, cur_subseq);
 	}
 
-	list_for_each_entry(d, &card->dapm_list, list) {
+	for_each_card_dapms(card, d)
 		soc_dapm_async_complete(d);
-	}
 }
 
 static void dapm_widget_update(struct snd_soc_card *card)
@@ -1724,9 +1739,7 @@ static void dapm_widget_update(struct snd_soc_card *card)
 
 	wlist = dapm_kcontrol_get_wlist(update->kcontrol);
 
-	for (wi = 0; wi < wlist->num_widgets; wi++) {
-		w = wlist->widgets[wi];
-
+	for_each_dapm_widgets(wlist, wi, w) {
 		if (w->event && (w->event_flags & SND_SOC_DAPM_PRE_REG)) {
 			ret = w->event(w, update->kcontrol, SND_SOC_DAPM_PRE_REG);
 			if (ret != 0)
@@ -1753,9 +1766,7 @@ static void dapm_widget_update(struct snd_soc_card *card)
 				w->name, ret);
 	}
 
-	for (wi = 0; wi < wlist->num_widgets; wi++) {
-		w = wlist->widgets[wi];
-
+	for_each_dapm_widgets(wlist, wi, w) {
 		if (w->event && (w->event_flags & SND_SOC_DAPM_POST_REG)) {
 			ret = w->event(w, update->kcontrol, SND_SOC_DAPM_POST_REG);
 			if (ret != 0)
@@ -1943,7 +1954,7 @@ static int dapm_power_widgets(struct snd_soc_card *card, int event)
 
 	trace_snd_soc_dapm_start(card);
 
-	list_for_each_entry(d, &card->dapm_list, list) {
+	for_each_card_dapms(card, d) {
 		if (dapm_idle_bias_off(d))
 			d->target_bias_level = SND_SOC_BIAS_OFF;
 		else
@@ -1962,7 +1973,7 @@ static int dapm_power_widgets(struct snd_soc_card *card, int event)
 		dapm_power_one_widget(w, &up_list, &down_list);
 	}
 
-	list_for_each_entry(w, &card->widgets, list) {
+	for_each_card_widgets(card, w) {
 		switch (w->id) {
 		case snd_soc_dapm_pre:
 		case snd_soc_dapm_post:
@@ -2007,10 +2018,10 @@ static int dapm_power_widgets(struct snd_soc_card *card, int event)
 	 * they're not ground referenced.
 	 */
 	bias = SND_SOC_BIAS_OFF;
-	list_for_each_entry(d, &card->dapm_list, list)
+	for_each_card_dapms(card, d)
 		if (d->target_bias_level > bias)
 			bias = d->target_bias_level;
-	list_for_each_entry(d, &card->dapm_list, list)
+	for_each_card_dapms(card, d)
 		if (!dapm_idle_bias_off(d))
 			d->target_bias_level = bias;
 
@@ -2019,7 +2030,7 @@ static int dapm_power_widgets(struct snd_soc_card *card, int event)
 	/* Run card bias changes at first */
 	dapm_pre_sequence_async(&card->dapm, 0);
 	/* Run other bias changes in parallel */
-	list_for_each_entry(d, &card->dapm_list, list) {
+	for_each_card_dapms(card, d) {
 		if (d != &card->dapm && d->bias_level != d->target_bias_level)
 			async_schedule_domain(dapm_pre_sequence_async, d,
 						&async_domain);
@@ -2043,7 +2054,7 @@ static int dapm_power_widgets(struct snd_soc_card *card, int event)
 	dapm_seq_run(card, &up_list, event, true);
 
 	/* Run all the bias changes in parallel */
-	list_for_each_entry(d, &card->dapm_list, list) {
+	for_each_card_dapms(card, d) {
 		if (d != &card->dapm && d->bias_level != d->target_bias_level)
 			async_schedule_domain(dapm_post_sequence_async, d,
 						&async_domain);
@@ -2053,7 +2064,7 @@ static int dapm_power_widgets(struct snd_soc_card *card, int event)
 	dapm_post_sequence_async(&card->dapm, 0);
 
 	/* do we need to notify any clients that DAPM event is complete */
-	list_for_each_entry(d, &card->dapm_list, list) {
+	for_each_card_dapms(card, d) {
 		if (!d->component)
 			continue;
 
@@ -2286,7 +2297,7 @@ int snd_soc_dapm_mux_update_power(struct snd_soc_dapm_context *dapm,
 	card->update = NULL;
 	mutex_unlock(&card->dapm_mutex);
 	if (ret > 0)
-		soc_dpcm_runtime_update(card);
+		snd_soc_dpcm_runtime_update(card);
 	return ret;
 }
 EXPORT_SYMBOL_GPL(snd_soc_dapm_mux_update_power);
@@ -2351,7 +2362,7 @@ int snd_soc_dapm_mixer_update_power(struct snd_soc_dapm_context *dapm,
 	card->update = NULL;
 	mutex_unlock(&card->dapm_mutex);
 	if (ret > 0)
-		soc_dpcm_runtime_update(card);
+		snd_soc_dpcm_runtime_update(card);
 	return ret;
 }
 EXPORT_SYMBOL_GPL(snd_soc_dapm_mixer_update_power);
@@ -2371,7 +2382,7 @@ static ssize_t dapm_widget_show_component(struct snd_soc_component *cmpnt,
 	if (!cmpnt->card)
 		return 0;
 
-	list_for_each_entry(w, &cmpnt->card->widgets, list) {
+	for_each_card_widgets(cmpnt->card, w) {
 		if (w->dapm != dapm)
 			continue;
 
@@ -2431,7 +2442,7 @@ static ssize_t dapm_widget_show(struct device *dev,
 
 	mutex_lock(&rtd->card->dapm_mutex);
 
-	for_each_rtd_codec_dai(rtd, i, codec_dai) {
+	for_each_rtd_codec_dais(rtd, i, codec_dai) {
 		struct snd_soc_component *cmpnt = codec_dai->component;
 
 		count += dapm_widget_show_component(cmpnt, buf + count);
@@ -2491,7 +2502,7 @@ static void dapm_free_widgets(struct snd_soc_dapm_context *dapm)
 {
 	struct snd_soc_dapm_widget *w, *next_w;
 
-	list_for_each_entry_safe(w, next_w, &dapm->card->widgets, list) {
+	for_each_card_widgets_safe(dapm->card, w, next_w) {
 		if (w->dapm != dapm)
 			continue;
 		snd_soc_dapm_free_widget(w);
@@ -2506,7 +2517,7 @@ static struct snd_soc_dapm_widget *dapm_find_widget(
 	struct snd_soc_dapm_widget *w;
 	struct snd_soc_dapm_widget *fallback = NULL;
 
-	list_for_each_entry(w, &dapm->card->widgets, list) {
+	for_each_card_widgets(dapm->card, w) {
 		if (!strcmp(w->name, pin)) {
 			if (w->dapm == dapm)
 				return w;
@@ -2624,10 +2635,7 @@ static int dapm_update_dai_unlocked(struct snd_pcm_substream *substream,
 	struct snd_soc_dapm_widget *w;
 	int ret;
 
-	if (dir == SNDRV_PCM_STREAM_PLAYBACK)
-		w = dai->playback_widget;
-	else
-		w = dai->capture_widget;
+	w = snd_soc_dai_get_widget(dai, dir);
 
 	if (!w)
 		return 0;
@@ -2908,7 +2916,7 @@ static int snd_soc_dapm_add_route(struct snd_soc_dapm_context *dapm,
 	 * find src and dest widgets over all widgets but favor a widget from
 	 * current DAPM context
 	 */
-	list_for_each_entry(w, &dapm->card->widgets, list) {
+	for_each_card_widgets(dapm->card, w) {
 		if (!wsink && !(strcmp(w->name, sink))) {
 			wtsink = w;
 			if (w->dapm == dapm) {
@@ -3187,7 +3195,7 @@ int snd_soc_dapm_new_widgets(struct snd_soc_card *card)
 
 	mutex_lock_nested(&card->dapm_mutex, SND_SOC_DAPM_CLASS_INIT);
 
-	list_for_each_entry(w, &card->widgets, list)
+	for_each_card_widgets(card, w)
 	{
 		if (w->new)
 			continue;
@@ -3394,7 +3402,7 @@ int snd_soc_dapm_put_volsw(struct snd_kcontrol *kcontrol,
 	mutex_unlock(&card->dapm_mutex);
 
 	if (ret > 0)
-		soc_dpcm_runtime_update(card);
+		snd_soc_dpcm_runtime_update(card);
 
 	return change;
 }
@@ -3499,7 +3507,7 @@ int snd_soc_dapm_put_enum_double(struct snd_kcontrol *kcontrol,
 	mutex_unlock(&card->dapm_mutex);
 
 	if (ret > 0)
-		soc_dpcm_runtime_update(card);
+		snd_soc_dpcm_runtime_update(card);
 
 	return change;
 }
@@ -3604,6 +3612,9 @@ snd_soc_dapm_new_control_unlocked(struct snd_soc_dapm_context *dapm,
 			ret = PTR_ERR(w->pinctrl);
 			goto request_failed;
 		}
+
+		/* set to sleep_state when initializing */
+		dapm_pinctrl_event(w, NULL, SND_SOC_DAPM_POST_PMD);
 		break;
 	case snd_soc_dapm_clock_supply:
 		w->clk = devm_clk_get(dapm->dev, w->name);
@@ -3698,6 +3709,7 @@ snd_soc_dapm_new_control_unlocked(struct snd_soc_dapm_context *dapm,
 	w->dapm = dapm;
 	INIT_LIST_HEAD(&w->list);
 	INIT_LIST_HEAD(&w->dirty);
+	/* see for_each_card_widgets */
 	list_add_tail(&w->list, &dapm->card->widgets);
 
 	snd_soc_dapm_for_each_direction(dir) {
@@ -4222,7 +4234,7 @@ int snd_soc_dapm_link_dai_widgets(struct snd_soc_card *card)
 	struct snd_soc_dai *dai;
 
 	/* For each DAI widget... */
-	list_for_each_entry(dai_w, &card->widgets, list) {
+	for_each_card_widgets(card, dai_w) {
 		switch (dai_w->id) {
 		case snd_soc_dapm_dai_in:
 		case snd_soc_dapm_dai_out:
@@ -4241,7 +4253,7 @@ int snd_soc_dapm_link_dai_widgets(struct snd_soc_card *card)
 		dai = dai_w->priv;
 
 		/* ...find all widgets with the same stream and link them */
-		list_for_each_entry(w, &card->widgets, list) {
+		for_each_card_widgets(card, w) {
 			if (w->dapm != dai_w->dapm)
 				continue;
 
@@ -4271,16 +4283,15 @@ int snd_soc_dapm_link_dai_widgets(struct snd_soc_card *card)
 	return 0;
 }
 
-static void dapm_connect_dai_link_widgets(struct snd_soc_card *card,
-					  struct snd_soc_pcm_runtime *rtd)
+static void dapm_add_valid_dai_widget(struct snd_soc_card *card,
+				      struct snd_soc_pcm_runtime *rtd,
+				      struct snd_soc_dai *codec_dai,
+				      struct snd_soc_dai *cpu_dai)
 {
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-	struct snd_soc_dai *codec_dai;
 	struct snd_soc_dapm_widget *playback = NULL, *capture = NULL;
 	struct snd_soc_dapm_widget *codec, *playback_cpu, *capture_cpu;
 	struct snd_pcm_substream *substream;
 	struct snd_pcm_str *streams = rtd->pcm->streams;
-	int i;
 
 	if (rtd->dai_link->params) {
 		playback_cpu = cpu_dai->capture_widget;
@@ -4292,77 +4303,92 @@ static void dapm_connect_dai_link_widgets(struct snd_soc_card *card,
 		capture_cpu = capture;
 	}
 
-	for_each_rtd_codec_dai(rtd, i, codec_dai) {
-		/* connect BE DAI playback if widgets are valid */
-		codec = codec_dai->playback_widget;
+	/* connect BE DAI playback if widgets are valid */
+	codec = codec_dai->playback_widget;
 
-		if (playback_cpu && codec) {
-			if (!playback) {
-				substream = streams[SNDRV_PCM_STREAM_PLAYBACK].substream;
-				playback = snd_soc_dapm_new_dai(card, substream,
-								"playback");
-				if (IS_ERR(playback)) {
-					dev_err(rtd->dev,
-						"ASoC: Failed to create DAI %s: %ld\n",
-						codec_dai->name,
-						PTR_ERR(playback));
-					continue;
-				}
-
-				snd_soc_dapm_add_path(&card->dapm, playback_cpu,
-						      playback, NULL, NULL);
+	if (playback_cpu && codec) {
+		if (!playback) {
+			substream = streams[SNDRV_PCM_STREAM_PLAYBACK].substream;
+			playback = snd_soc_dapm_new_dai(card, substream,
+							"playback");
+			if (IS_ERR(playback)) {
+				dev_err(rtd->dev,
+					"ASoC: Failed to create DAI %s: %ld\n",
+					codec_dai->name,
+					PTR_ERR(playback));
+				goto capture;
 			}
 
-			dev_dbg(rtd->dev, "connected DAI link %s:%s -> %s:%s\n",
-				cpu_dai->component->name, playback_cpu->name,
-				codec_dai->component->name, codec->name);
-
-			snd_soc_dapm_add_path(&card->dapm, playback, codec,
-					      NULL, NULL);
+			snd_soc_dapm_add_path(&card->dapm, playback_cpu,
+					      playback, NULL, NULL);
 		}
+
+		dev_dbg(rtd->dev, "connected DAI link %s:%s -> %s:%s\n",
+			cpu_dai->component->name, playback_cpu->name,
+			codec_dai->component->name, codec->name);
+
+		snd_soc_dapm_add_path(&card->dapm, playback, codec,
+				      NULL, NULL);
 	}
 
-	for_each_rtd_codec_dai(rtd, i, codec_dai) {
-		/* connect BE DAI capture if widgets are valid */
-		codec = codec_dai->capture_widget;
+capture:
+	/* connect BE DAI capture if widgets are valid */
+	codec = codec_dai->capture_widget;
 
-		if (codec && capture_cpu) {
-			if (!capture) {
-				substream = streams[SNDRV_PCM_STREAM_CAPTURE].substream;
-				capture = snd_soc_dapm_new_dai(card, substream,
-							       "capture");
-				if (IS_ERR(capture)) {
-					dev_err(rtd->dev,
-						"ASoC: Failed to create DAI %s: %ld\n",
-						codec_dai->name,
-						PTR_ERR(capture));
-					continue;
-				}
-
-				snd_soc_dapm_add_path(&card->dapm, capture,
-						      capture_cpu, NULL, NULL);
+	if (codec && capture_cpu) {
+		if (!capture) {
+			substream = streams[SNDRV_PCM_STREAM_CAPTURE].substream;
+			capture = snd_soc_dapm_new_dai(card, substream,
+						       "capture");
+			if (IS_ERR(capture)) {
+				dev_err(rtd->dev,
+					"ASoC: Failed to create DAI %s: %ld\n",
+					codec_dai->name,
+					PTR_ERR(capture));
+				return;
 			}
 
-			dev_dbg(rtd->dev, "connected DAI link %s:%s -> %s:%s\n",
-				codec_dai->component->name, codec->name,
-				cpu_dai->component->name, capture_cpu->name);
-
-			snd_soc_dapm_add_path(&card->dapm, codec, capture,
-					      NULL, NULL);
+			snd_soc_dapm_add_path(&card->dapm, capture,
+					      capture_cpu, NULL, NULL);
 		}
+
+		dev_dbg(rtd->dev, "connected DAI link %s:%s -> %s:%s\n",
+			codec_dai->component->name, codec->name,
+			cpu_dai->component->name, capture_cpu->name);
+
+		snd_soc_dapm_add_path(&card->dapm, codec, capture,
+				      NULL, NULL);
 	}
 }
 
+static void dapm_connect_dai_link_widgets(struct snd_soc_card *card,
+					  struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_dai *codec_dai;
+	int i;
+
+	if (rtd->num_cpus == 1) {
+		for_each_rtd_codec_dais(rtd, i, codec_dai)
+			dapm_add_valid_dai_widget(card, rtd, codec_dai,
+						  rtd->cpu_dais[0]);
+	} else if (rtd->num_codecs == rtd->num_cpus) {
+		for_each_rtd_codec_dais(rtd, i, codec_dai)
+			dapm_add_valid_dai_widget(card, rtd, codec_dai,
+						  rtd->cpu_dais[i]);
+	} else {
+		dev_err(card->dev,
+			"N cpus to M codecs link is not supported yet\n");
+	}
+
+}
+
 static void soc_dapm_dai_stream_event(struct snd_soc_dai *dai, int stream,
 	int event)
 {
 	struct snd_soc_dapm_widget *w;
 	unsigned int ep;
 
-	if (stream == SNDRV_PCM_STREAM_PLAYBACK)
-		w = dai->playback_widget;
-	else
-		w = dai->capture_widget;
+	w = snd_soc_dai_get_widget(dai, stream);
 
 	if (w) {
 		dapm_mark_dirty(w, "stream event");
@@ -4413,12 +4439,11 @@ void snd_soc_dapm_connect_dai_link_widgets(struct snd_soc_card *card)
 static void soc_dapm_stream_event(struct snd_soc_pcm_runtime *rtd, int stream,
 	int event)
 {
-	struct snd_soc_dai *codec_dai;
+	struct snd_soc_dai *dai;
 	int i;
 
-	soc_dapm_dai_stream_event(rtd->cpu_dai, stream, event);
-	for_each_rtd_codec_dai(rtd, i, codec_dai)
-		soc_dapm_dai_stream_event(codec_dai, stream, event);
+	for_each_rtd_dais(rtd, i, dai)
+		soc_dapm_dai_stream_event(dai, stream, event);
 
 	dapm_power_widgets(rtd->card, event);
 }
@@ -4754,6 +4779,7 @@ void snd_soc_dapm_init(struct snd_soc_dapm_context *dapm,
 	}
 
 	INIT_LIST_HEAD(&dapm->list);
+	/* see for_each_card_dapms */
 	list_add(&dapm->list, &card->dapm_list);
 }
 EXPORT_SYMBOL_GPL(snd_soc_dapm_init);
@@ -4767,7 +4793,7 @@ static void soc_dapm_shutdown_dapm(struct snd_soc_dapm_context *dapm)
 
 	mutex_lock(&card->dapm_mutex);
 
-	list_for_each_entry(w, &dapm->card->widgets, list) {
+	for_each_card_widgets(dapm->card, w) {
 		if (w->dapm != dapm)
 			continue;
 		if (w->power) {
@@ -4800,7 +4826,7 @@ void snd_soc_dapm_shutdown(struct snd_soc_card *card)
 {
 	struct snd_soc_dapm_context *dapm;
 
-	list_for_each_entry(dapm, &card->dapm_list, list) {
+	for_each_card_dapms(card, dapm) {
 		if (dapm != &card->dapm) {
 			soc_dapm_shutdown_dapm(dapm);
 			if (dapm->bias_level == SND_SOC_BIAS_STANDBY)
diff --git a/sound/soc/soc-generic-dmaengine-pcm.c b/sound/soc/soc-generic-dmaengine-pcm.c
index 2cc2565..facf192 100644
--- a/sound/soc/soc-generic-dmaengine-pcm.c
+++ b/sound/soc/soc-generic-dmaengine-pcm.c
@@ -62,6 +62,12 @@ int snd_dmaengine_pcm_prepare_slave_config(struct snd_pcm_substream *substream,
 	struct snd_dmaengine_dai_dma_data *dma_data;
 	int ret;
 
+	if (rtd->num_cpus > 1) {
+		dev_err(rtd->dev,
+			"%s doesn't support Multi CPU yet\n", __func__);
+		return -EINVAL;
+	}
+
 	dma_data = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
 
 	ret = snd_hwparams_to_dma_slave_config(substream, params, slave_config);
@@ -118,6 +124,12 @@ dmaengine_pcm_set_runtime_hwparams(struct snd_soc_component *component,
 	struct snd_dmaengine_dai_dma_data *dma_data;
 	struct snd_pcm_hardware hw;
 
+	if (rtd->num_cpus > 1) {
+		dev_err(rtd->dev,
+			"%s doesn't support Multi CPU yet\n", __func__);
+		return -EINVAL;
+	}
+
 	if (pcm->config && pcm->config->pcm_hardware)
 		return snd_soc_set_runtime_hwparams(substream,
 				pcm->config->pcm_hardware);
@@ -185,6 +197,12 @@ static struct dma_chan *dmaengine_pcm_compat_request_channel(
 	struct snd_dmaengine_dai_dma_data *dma_data;
 	dma_filter_fn fn = NULL;
 
+	if (rtd->num_cpus > 1) {
+		dev_err(rtd->dev,
+			"%s doesn't support Multi CPU yet\n", __func__);
+		return NULL;
+	}
+
 	dma_data = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
 
 	if ((pcm->flags & SND_DMAENGINE_PCM_FLAG_HALF_DUPLEX) && pcm->chan[0])
@@ -237,7 +255,7 @@ static int dmaengine_pcm_new(struct snd_soc_component *component,
 		max_buffer_size = SIZE_MAX;
 	}
 
-	for (i = SNDRV_PCM_STREAM_PLAYBACK; i <= SNDRV_PCM_STREAM_CAPTURE; i++) {
+	for_each_pcm_streams(i) {
 		substream = rtd->pcm->streams[i].substream;
 		if (!substream)
 			continue;
@@ -371,8 +389,7 @@ static int dmaengine_pcm_request_chan_of(struct dmaengine_pcm *pcm,
 		dev = config->dma_dev;
 	}
 
-	for (i = SNDRV_PCM_STREAM_PLAYBACK; i <= SNDRV_PCM_STREAM_CAPTURE;
-	     i++) {
+	for_each_pcm_streams(i) {
 		if (pcm->flags & SND_DMAENGINE_PCM_FLAG_HALF_DUPLEX)
 			name = "rx-tx";
 		else
@@ -401,8 +418,7 @@ static void dmaengine_pcm_release_chan(struct dmaengine_pcm *pcm)
 {
 	unsigned int i;
 
-	for (i = SNDRV_PCM_STREAM_PLAYBACK; i <= SNDRV_PCM_STREAM_CAPTURE;
-	     i++) {
+	for_each_pcm_streams(i) {
 		if (!pcm->chan[i])
 			continue;
 		dma_release_channel(pcm->chan[i]);
diff --git a/sound/soc/soc-ops.c b/sound/soc/soc-ops.c
index 652657d..55ffb34 100644
--- a/sound/soc/soc-ops.c
+++ b/sound/soc/soc-ops.c
@@ -825,7 +825,7 @@ int snd_soc_get_xr_sx(struct snd_kcontrol *kcontrol,
 	unsigned int regbase = mc->regbase;
 	unsigned int regcount = mc->regcount;
 	unsigned int regwshift = component->val_bytes * BITS_PER_BYTE;
-	unsigned int regwmask = (1<<regwshift)-1;
+	unsigned int regwmask = (1UL<<regwshift)-1;
 	unsigned int invert = mc->invert;
 	unsigned long mask = (1UL<<mc->nbits)-1;
 	long min = mc->min;
@@ -874,7 +874,7 @@ int snd_soc_put_xr_sx(struct snd_kcontrol *kcontrol,
 	unsigned int regbase = mc->regbase;
 	unsigned int regcount = mc->regcount;
 	unsigned int regwshift = component->val_bytes * BITS_PER_BYTE;
-	unsigned int regwmask = (1<<regwshift)-1;
+	unsigned int regwmask = (1UL<<regwshift)-1;
 	unsigned int invert = mc->invert;
 	unsigned long mask = (1UL<<mc->nbits)-1;
 	long max = mc->max;
diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c
index 2c59b36..289aebc 100644
--- a/sound/soc/soc-pcm.c
+++ b/sound/soc/soc-pcm.c
@@ -28,6 +28,180 @@
 
 #define DPCM_MAX_BE_USERS	8
 
+#ifdef CONFIG_DEBUG_FS
+static const char *dpcm_state_string(enum snd_soc_dpcm_state state)
+{
+	switch (state) {
+	case SND_SOC_DPCM_STATE_NEW:
+		return "new";
+	case SND_SOC_DPCM_STATE_OPEN:
+		return "open";
+	case SND_SOC_DPCM_STATE_HW_PARAMS:
+		return "hw_params";
+	case SND_SOC_DPCM_STATE_PREPARE:
+		return "prepare";
+	case SND_SOC_DPCM_STATE_START:
+		return "start";
+	case SND_SOC_DPCM_STATE_STOP:
+		return "stop";
+	case SND_SOC_DPCM_STATE_SUSPEND:
+		return "suspend";
+	case SND_SOC_DPCM_STATE_PAUSED:
+		return "paused";
+	case SND_SOC_DPCM_STATE_HW_FREE:
+		return "hw_free";
+	case SND_SOC_DPCM_STATE_CLOSE:
+		return "close";
+	}
+
+	return "unknown";
+}
+
+static ssize_t dpcm_show_state(struct snd_soc_pcm_runtime *fe,
+			       int stream, char *buf, size_t size)
+{
+	struct snd_pcm_hw_params *params = &fe->dpcm[stream].hw_params;
+	struct snd_soc_dpcm *dpcm;
+	ssize_t offset = 0;
+	unsigned long flags;
+
+	/* FE state */
+	offset += scnprintf(buf + offset, size - offset,
+			   "[%s - %s]\n", fe->dai_link->name,
+			   stream ? "Capture" : "Playback");
+
+	offset += scnprintf(buf + offset, size - offset, "State: %s\n",
+			   dpcm_state_string(fe->dpcm[stream].state));
+
+	if ((fe->dpcm[stream].state >= SND_SOC_DPCM_STATE_HW_PARAMS) &&
+	    (fe->dpcm[stream].state <= SND_SOC_DPCM_STATE_STOP))
+		offset += scnprintf(buf + offset, size - offset,
+				   "Hardware Params: "
+				   "Format = %s, Channels = %d, Rate = %d\n",
+				   snd_pcm_format_name(params_format(params)),
+				   params_channels(params),
+				   params_rate(params));
+
+	/* BEs state */
+	offset += scnprintf(buf + offset, size - offset, "Backends:\n");
+
+	if (list_empty(&fe->dpcm[stream].be_clients)) {
+		offset += scnprintf(buf + offset, size - offset,
+				   " No active DSP links\n");
+		goto out;
+	}
+
+	spin_lock_irqsave(&fe->card->dpcm_lock, flags);
+	for_each_dpcm_be(fe, stream, dpcm) {
+		struct snd_soc_pcm_runtime *be = dpcm->be;
+		params = &dpcm->hw_params;
+
+		offset += scnprintf(buf + offset, size - offset,
+				   "- %s\n", be->dai_link->name);
+
+		offset += scnprintf(buf + offset, size - offset,
+				   "   State: %s\n",
+				   dpcm_state_string(be->dpcm[stream].state));
+
+		if ((be->dpcm[stream].state >= SND_SOC_DPCM_STATE_HW_PARAMS) &&
+		    (be->dpcm[stream].state <= SND_SOC_DPCM_STATE_STOP))
+			offset += scnprintf(buf + offset, size - offset,
+					   "   Hardware Params: "
+					   "Format = %s, Channels = %d, Rate = %d\n",
+					   snd_pcm_format_name(params_format(params)),
+					   params_channels(params),
+					   params_rate(params));
+	}
+	spin_unlock_irqrestore(&fe->card->dpcm_lock, flags);
+out:
+	return offset;
+}
+
+static ssize_t dpcm_state_read_file(struct file *file, char __user *user_buf,
+				    size_t count, loff_t *ppos)
+{
+	struct snd_soc_pcm_runtime *fe = file->private_data;
+	ssize_t out_count = PAGE_SIZE, offset = 0, ret = 0;
+	int stream;
+	char *buf;
+
+	if (fe->num_cpus > 1) {
+		dev_err(fe->dev,
+			"%s doesn't support Multi CPU yet\n", __func__);
+		return -EINVAL;
+	}
+
+	buf = kmalloc(out_count, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	for_each_pcm_streams(stream)
+		if (snd_soc_dai_stream_valid(fe->cpu_dai, stream))
+			offset += dpcm_show_state(fe, stream,
+						  buf + offset,
+						  out_count - offset);
+
+	ret = simple_read_from_buffer(user_buf, count, ppos, buf, offset);
+
+	kfree(buf);
+	return ret;
+}
+
+static const struct file_operations dpcm_state_fops = {
+	.open = simple_open,
+	.read = dpcm_state_read_file,
+	.llseek = default_llseek,
+};
+
+void soc_dpcm_debugfs_add(struct snd_soc_pcm_runtime *rtd)
+{
+	if (!rtd->dai_link)
+		return;
+
+	if (!rtd->dai_link->dynamic)
+		return;
+
+	if (!rtd->card->debugfs_card_root)
+		return;
+
+	rtd->debugfs_dpcm_root = debugfs_create_dir(rtd->dai_link->name,
+						    rtd->card->debugfs_card_root);
+
+	debugfs_create_file("state", 0444, rtd->debugfs_dpcm_root,
+			    rtd, &dpcm_state_fops);
+}
+
+static void dpcm_create_debugfs_state(struct snd_soc_dpcm *dpcm, int stream)
+{
+	char *name;
+
+	name = kasprintf(GFP_KERNEL, "%s:%s", dpcm->be->dai_link->name,
+			 stream ? "capture" : "playback");
+	if (name) {
+		dpcm->debugfs_state = debugfs_create_dir(
+			name, dpcm->fe->debugfs_dpcm_root);
+		debugfs_create_u32("state", 0644, dpcm->debugfs_state,
+				   &dpcm->state);
+		kfree(name);
+	}
+}
+
+static void dpcm_remove_debugfs_state(struct snd_soc_dpcm *dpcm)
+{
+	debugfs_remove_recursive(dpcm->debugfs_state);
+}
+
+#else
+static inline void dpcm_create_debugfs_state(struct snd_soc_dpcm *dpcm,
+					     int stream)
+{
+}
+
+static inline void dpcm_remove_debugfs_state(struct snd_soc_dpcm *dpcm)
+{
+}
+#endif
+
 static int soc_rtd_startup(struct snd_soc_pcm_runtime *rtd,
 			   struct snd_pcm_substream *substream)
 {
@@ -82,6 +256,21 @@ static int soc_rtd_trigger(struct snd_soc_pcm_runtime *rtd,
 	return 0;
 }
 
+static void snd_soc_runtime_action(struct snd_soc_pcm_runtime *rtd,
+				   int stream, int action)
+{
+	struct snd_soc_dai *dai;
+	int i;
+
+	lockdep_assert_held(&rtd->card->pcm_mutex);
+
+	for_each_rtd_dais(rtd, i, dai) {
+		dai->stream_active[stream] += action;
+		dai->active += action;
+		dai->component->active += action;
+	}
+}
+
 /**
  * snd_soc_runtime_activate() - Increment active count for PCM runtime components
  * @rtd: ASoC PCM runtime that is activated
@@ -94,29 +283,9 @@ static int soc_rtd_trigger(struct snd_soc_pcm_runtime *rtd,
  */
 void snd_soc_runtime_activate(struct snd_soc_pcm_runtime *rtd, int stream)
 {
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-	struct snd_soc_dai *codec_dai;
-	int i;
-
-	lockdep_assert_held(&rtd->card->pcm_mutex);
-
-	if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
-		cpu_dai->playback_active++;
-		for_each_rtd_codec_dai(rtd, i, codec_dai)
-			codec_dai->playback_active++;
-	} else {
-		cpu_dai->capture_active++;
-		for_each_rtd_codec_dai(rtd, i, codec_dai)
-			codec_dai->capture_active++;
-	}
-
-	cpu_dai->active++;
-	cpu_dai->component->active++;
-	for_each_rtd_codec_dai(rtd, i, codec_dai) {
-		codec_dai->active++;
-		codec_dai->component->active++;
-	}
+	snd_soc_runtime_action(rtd, stream, 1);
 }
+EXPORT_SYMBOL_GPL(snd_soc_runtime_activate);
 
 /**
  * snd_soc_runtime_deactivate() - Decrement active count for PCM runtime components
@@ -130,29 +299,9 @@ void snd_soc_runtime_activate(struct snd_soc_pcm_runtime *rtd, int stream)
  */
 void snd_soc_runtime_deactivate(struct snd_soc_pcm_runtime *rtd, int stream)
 {
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-	struct snd_soc_dai *codec_dai;
-	int i;
-
-	lockdep_assert_held(&rtd->card->pcm_mutex);
-
-	if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
-		cpu_dai->playback_active--;
-		for_each_rtd_codec_dai(rtd, i, codec_dai)
-			codec_dai->playback_active--;
-	} else {
-		cpu_dai->capture_active--;
-		for_each_rtd_codec_dai(rtd, i, codec_dai)
-			codec_dai->capture_active--;
-	}
-
-	cpu_dai->active--;
-	cpu_dai->component->active--;
-	for_each_rtd_codec_dai(rtd, i, codec_dai) {
-		codec_dai->component->active--;
-		codec_dai->active--;
-	}
+	snd_soc_runtime_action(rtd, stream, -1);
 }
+EXPORT_SYMBOL_GPL(snd_soc_runtime_deactivate);
 
 /**
  * snd_soc_runtime_ignore_pmdown_time() - Check whether to ignore the power down delay
@@ -287,8 +436,8 @@ static int soc_pcm_params_symmetry(struct snd_pcm_substream *substream,
 				struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-	struct snd_soc_dai *codec_dai;
+	struct snd_soc_dai *dai;
+	struct snd_soc_dai *cpu_dai;
 	unsigned int rate, channels, sample_bits, symmetry, i;
 
 	rate = params_rate(params);
@@ -296,40 +445,51 @@ static int soc_pcm_params_symmetry(struct snd_pcm_substream *substream,
 	sample_bits = snd_pcm_format_physical_width(params_format(params));
 
 	/* reject unmatched parameters when applying symmetry */
-	symmetry = cpu_dai->driver->symmetric_rates ||
-		rtd->dai_link->symmetric_rates;
+	symmetry = rtd->dai_link->symmetric_rates;
 
-	for_each_rtd_codec_dai(rtd, i, codec_dai)
-		symmetry |= codec_dai->driver->symmetric_rates;
+	for_each_rtd_cpu_dais(rtd, i, dai)
+		symmetry |= dai->driver->symmetric_rates;
 
-	if (symmetry && cpu_dai->rate && cpu_dai->rate != rate) {
-		dev_err(rtd->dev, "ASoC: unmatched rate symmetry: %d - %d\n",
-				cpu_dai->rate, rate);
-		return -EINVAL;
+	if (symmetry) {
+		for_each_rtd_cpu_dais(rtd, i, cpu_dai) {
+			if (cpu_dai->rate && cpu_dai->rate != rate) {
+				dev_err(rtd->dev, "ASoC: unmatched rate symmetry: %d - %d\n",
+					cpu_dai->rate, rate);
+				return -EINVAL;
+			}
+		}
 	}
 
-	symmetry = cpu_dai->driver->symmetric_channels ||
-		rtd->dai_link->symmetric_channels;
+	symmetry = rtd->dai_link->symmetric_channels;
 
-	for_each_rtd_codec_dai(rtd, i, codec_dai)
-		symmetry |= codec_dai->driver->symmetric_channels;
+	for_each_rtd_dais(rtd, i, dai)
+		symmetry |= dai->driver->symmetric_channels;
 
-	if (symmetry && cpu_dai->channels && cpu_dai->channels != channels) {
-		dev_err(rtd->dev, "ASoC: unmatched channel symmetry: %d - %d\n",
-				cpu_dai->channels, channels);
-		return -EINVAL;
+	if (symmetry) {
+		for_each_rtd_cpu_dais(rtd, i, cpu_dai) {
+			if (cpu_dai->channels &&
+			    cpu_dai->channels != channels) {
+				dev_err(rtd->dev, "ASoC: unmatched channel symmetry: %d - %d\n",
+					cpu_dai->channels, channels);
+				return -EINVAL;
+			}
+		}
 	}
 
-	symmetry = cpu_dai->driver->symmetric_samplebits ||
-		rtd->dai_link->symmetric_samplebits;
+	symmetry = rtd->dai_link->symmetric_samplebits;
 
-	for_each_rtd_codec_dai(rtd, i, codec_dai)
-		symmetry |= codec_dai->driver->symmetric_samplebits;
+	for_each_rtd_dais(rtd, i, dai)
+		symmetry |= dai->driver->symmetric_samplebits;
 
-	if (symmetry && cpu_dai->sample_bits && cpu_dai->sample_bits != sample_bits) {
-		dev_err(rtd->dev, "ASoC: unmatched sample bits symmetry: %d - %d\n",
-				cpu_dai->sample_bits, sample_bits);
-		return -EINVAL;
+	if (symmetry) {
+		for_each_rtd_cpu_dais(rtd, i, cpu_dai) {
+			if (cpu_dai->sample_bits &&
+			    cpu_dai->sample_bits != sample_bits) {
+				dev_err(rtd->dev, "ASoC: unmatched sample bits symmetry: %d - %d\n",
+					cpu_dai->sample_bits, sample_bits);
+				return -EINVAL;
+			}
+		}
 	}
 
 	return 0;
@@ -338,20 +498,19 @@ static int soc_pcm_params_symmetry(struct snd_pcm_substream *substream,
 static bool soc_pcm_has_symmetry(struct snd_pcm_substream *substream)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai_driver *cpu_driver = rtd->cpu_dai->driver;
 	struct snd_soc_dai_link *link = rtd->dai_link;
-	struct snd_soc_dai *codec_dai;
+	struct snd_soc_dai *dai;
 	unsigned int symmetry, i;
 
-	symmetry = cpu_driver->symmetric_rates || link->symmetric_rates ||
-		cpu_driver->symmetric_channels || link->symmetric_channels ||
-		cpu_driver->symmetric_samplebits || link->symmetric_samplebits;
+	symmetry = link->symmetric_rates ||
+		link->symmetric_channels ||
+		link->symmetric_samplebits;
 
-	for_each_rtd_codec_dai(rtd, i, codec_dai)
+	for_each_rtd_dais(rtd, i, dai)
 		symmetry = symmetry ||
-			codec_dai->driver->symmetric_rates ||
-			codec_dai->driver->symmetric_channels ||
-			codec_dai->driver->symmetric_samplebits;
+			dai->driver->symmetric_rates ||
+			dai->driver->symmetric_channels ||
+			dai->driver->symmetric_samplebits;
 
 	return symmetry;
 }
@@ -373,77 +532,98 @@ static void soc_pcm_set_msb(struct snd_pcm_substream *substream, int bits)
 static void soc_pcm_apply_msb(struct snd_pcm_substream *substream)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *cpu_dai;
 	struct snd_soc_dai *codec_dai;
+	struct snd_soc_pcm_stream *pcm_codec, *pcm_cpu;
+	int stream = substream->stream;
 	int i;
-	unsigned int bits = 0, cpu_bits;
+	unsigned int bits = 0, cpu_bits = 0;
 
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-		for_each_rtd_codec_dai(rtd, i, codec_dai) {
-			if (codec_dai->driver->playback.sig_bits == 0) {
-				bits = 0;
-				break;
-			}
-			bits = max(codec_dai->driver->playback.sig_bits, bits);
+	for_each_rtd_codec_dais(rtd, i, codec_dai) {
+		pcm_codec = snd_soc_dai_get_pcm_stream(codec_dai, stream);
+
+		if (pcm_codec->sig_bits == 0) {
+			bits = 0;
+			break;
 		}
-		cpu_bits = cpu_dai->driver->playback.sig_bits;
-	} else {
-		for_each_rtd_codec_dai(rtd, i, codec_dai) {
-			if (codec_dai->driver->capture.sig_bits == 0) {
-				bits = 0;
-				break;
-			}
-			bits = max(codec_dai->driver->capture.sig_bits, bits);
+		bits = max(pcm_codec->sig_bits, bits);
+	}
+
+	for_each_rtd_cpu_dais(rtd, i, cpu_dai) {
+		pcm_cpu = snd_soc_dai_get_pcm_stream(cpu_dai, stream);
+
+		if (pcm_cpu->sig_bits == 0) {
+			cpu_bits = 0;
+			break;
 		}
-		cpu_bits = cpu_dai->driver->capture.sig_bits;
+		cpu_bits = max(pcm_cpu->sig_bits, cpu_bits);
 	}
 
 	soc_pcm_set_msb(substream, bits);
 	soc_pcm_set_msb(substream, cpu_bits);
 }
 
-static void soc_pcm_init_runtime_hw(struct snd_pcm_substream *substream)
+/**
+ * snd_soc_runtime_calc_hw() - Calculate hw limits for a PCM stream
+ * @rtd: ASoC PCM runtime
+ * @hw: PCM hardware parameters (output)
+ * @stream: Direction of the PCM stream
+ *
+ * Calculates the subset of stream parameters supported by all DAIs
+ * associated with the PCM stream.
+ */
+int snd_soc_runtime_calc_hw(struct snd_soc_pcm_runtime *rtd,
+			    struct snd_pcm_hardware *hw, int stream)
 {
-	struct snd_pcm_runtime *runtime = substream->runtime;
-	struct snd_pcm_hardware *hw = &runtime->hw;
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_dai *codec_dai;
-	struct snd_soc_dai_driver *cpu_dai_drv = rtd->cpu_dai->driver;
-	struct snd_soc_dai_driver *codec_dai_drv;
+	struct snd_soc_dai *cpu_dai;
 	struct snd_soc_pcm_stream *codec_stream;
 	struct snd_soc_pcm_stream *cpu_stream;
 	unsigned int chan_min = 0, chan_max = UINT_MAX;
+	unsigned int cpu_chan_min = 0, cpu_chan_max = UINT_MAX;
 	unsigned int rate_min = 0, rate_max = UINT_MAX;
-	unsigned int rates = UINT_MAX;
+	unsigned int cpu_rate_min = 0, cpu_rate_max = UINT_MAX;
+	unsigned int rates = UINT_MAX, cpu_rates = UINT_MAX;
 	u64 formats = ULLONG_MAX;
 	int i;
 
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-		cpu_stream = &cpu_dai_drv->playback;
-	else
-		cpu_stream = &cpu_dai_drv->capture;
+	/* first calculate min/max only for CPUs in the DAI link */
+	for_each_rtd_cpu_dais(rtd, i, cpu_dai) {
 
-	/* first calculate min/max only for CODECs in the DAI link */
-	for_each_rtd_codec_dai(rtd, i, codec_dai) {
+		/*
+		 * Skip CPUs which don't support the current stream type.
+		 * Otherwise, since the rate, channel, and format values will
+		 * zero in that case, we would have no usable settings left,
+		 * causing the resulting setup to fail.
+		 */
+		if (!snd_soc_dai_stream_valid(cpu_dai, stream))
+			continue;
+
+		cpu_stream = snd_soc_dai_get_pcm_stream(cpu_dai, stream);
+
+		cpu_chan_min = max(cpu_chan_min, cpu_stream->channels_min);
+		cpu_chan_max = min(cpu_chan_max, cpu_stream->channels_max);
+		cpu_rate_min = max(cpu_rate_min, cpu_stream->rate_min);
+		cpu_rate_max = min_not_zero(cpu_rate_max, cpu_stream->rate_max);
+		formats &= cpu_stream->formats;
+		cpu_rates = snd_pcm_rate_mask_intersect(cpu_stream->rates,
+							cpu_rates);
+	}
+
+	/* second calculate min/max only for CODECs in the DAI link */
+	for_each_rtd_codec_dais(rtd, i, codec_dai) {
 
 		/*
 		 * Skip CODECs which don't support the current stream type.
 		 * Otherwise, since the rate, channel, and format values will
 		 * zero in that case, we would have no usable settings left,
 		 * causing the resulting setup to fail.
-		 * At least one CODEC should match, otherwise we should have
-		 * bailed out on a higher level, since there would be no
-		 * CODEC to support the transfer direction in that case.
 		 */
-		if (!snd_soc_dai_stream_valid(codec_dai,
-					      substream->stream))
+		if (!snd_soc_dai_stream_valid(codec_dai, stream))
 			continue;
 
-		codec_dai_drv = codec_dai->driver;
-		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-			codec_stream = &codec_dai_drv->playback;
-		else
-			codec_stream = &codec_dai_drv->capture;
+		codec_stream = snd_soc_dai_get_pcm_stream(codec_dai, stream);
+
 		chan_min = max(chan_min, codec_stream->channels_min);
 		chan_max = min(chan_max, codec_stream->channels_max);
 		rate_min = max(rate_min, codec_stream->rate_min);
@@ -452,74 +632,107 @@ static void soc_pcm_init_runtime_hw(struct snd_pcm_substream *substream)
 		rates = snd_pcm_rate_mask_intersect(codec_stream->rates, rates);
 	}
 
+	/* Verify both a valid CPU DAI and a valid CODEC DAI were found */
+	if (!chan_min || !cpu_chan_min)
+		return -EINVAL;
+
 	/*
 	 * chan min/max cannot be enforced if there are multiple CODEC DAIs
-	 * connected to a single CPU DAI, use CPU DAI's directly and let
+	 * connected to CPU DAI(s), use CPU DAI's directly and let
 	 * channel allocation be fixed up later
 	 */
 	if (rtd->num_codecs > 1) {
-		chan_min = cpu_stream->channels_min;
-		chan_max = cpu_stream->channels_max;
+		chan_min = cpu_chan_min;
+		chan_max = cpu_chan_max;
 	}
 
-	hw->channels_min = max(chan_min, cpu_stream->channels_min);
-	hw->channels_max = min(chan_max, cpu_stream->channels_max);
-	if (hw->formats)
-		hw->formats &= formats & cpu_stream->formats;
-	else
-		hw->formats = formats & cpu_stream->formats;
-	hw->rates = snd_pcm_rate_mask_intersect(rates, cpu_stream->rates);
+	/* finally find a intersection between CODECs and CPUs */
+	hw->channels_min = max(chan_min, cpu_chan_min);
+	hw->channels_max = min(chan_max, cpu_chan_max);
+	hw->formats = formats;
+	hw->rates = snd_pcm_rate_mask_intersect(rates, cpu_rates);
 
-	snd_pcm_limit_hw_rates(runtime);
+	snd_pcm_hw_limit_rates(hw);
 
-	hw->rate_min = max(hw->rate_min, cpu_stream->rate_min);
+	hw->rate_min = max(hw->rate_min, cpu_rate_min);
 	hw->rate_min = max(hw->rate_min, rate_min);
-	hw->rate_max = min_not_zero(hw->rate_max, cpu_stream->rate_max);
+	hw->rate_max = min_not_zero(hw->rate_max, cpu_rate_max);
 	hw->rate_max = min_not_zero(hw->rate_max, rate_max);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(snd_soc_runtime_calc_hw);
+
+static void soc_pcm_init_runtime_hw(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_hardware *hw = &substream->runtime->hw;
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	u64 formats = hw->formats;
+
+	/*
+	 * At least one CPU and one CODEC should match. Otherwise, we should
+	 * have bailed out on a higher level, since there would be no CPU or
+	 * CODEC to support the transfer direction in that case.
+	 */
+	snd_soc_runtime_calc_hw(rtd, hw, substream->stream);
+
+	if (formats)
+		hw->formats &= formats;
 }
 
-static int soc_pcm_components_open(struct snd_pcm_substream *substream,
-				   struct snd_soc_component **last)
+static int soc_pcm_components_open(struct snd_pcm_substream *substream)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_component *last = NULL;
 	struct snd_soc_component *component;
 	int i, ret = 0;
 
 	for_each_rtd_components(rtd, i, component) {
-		*last = component;
+		last = component;
 
 		ret = snd_soc_component_module_get_when_open(component);
 		if (ret < 0) {
 			dev_err(component->dev,
 				"ASoC: can't get module %s\n",
 				component->name);
-			return ret;
+			break;
 		}
 
 		ret = snd_soc_component_open(component, substream);
 		if (ret < 0) {
+			snd_soc_component_module_put_when_close(component);
 			dev_err(component->dev,
 				"ASoC: can't open component %s: %d\n",
 				component->name, ret);
-			return ret;
+			break;
 		}
 	}
-	*last = NULL;
-	return 0;
+
+	if (ret < 0) {
+		/* rollback on error */
+		for_each_rtd_components(rtd, i, component) {
+			if (component == last)
+				break;
+
+			snd_soc_component_close(component, substream);
+			snd_soc_component_module_put_when_close(component);
+		}
+	}
+
+	return ret;
 }
 
-static int soc_pcm_components_close(struct snd_pcm_substream *substream,
-				    struct snd_soc_component *last)
+static int soc_pcm_components_close(struct snd_pcm_substream *substream)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_component *component;
-	int i, ret = 0;
+	int i, r, ret = 0;
 
 	for_each_rtd_components(rtd, i, component) {
-		if (component == last)
-			break;
+		r = snd_soc_component_close(component, substream);
+		if (r < 0)
+			ret = r; /* use last ret */
 
-		ret |= snd_soc_component_close(component, substream);
 		snd_soc_component_module_put_when_close(component);
 	}
 
@@ -527,6 +740,45 @@ static int soc_pcm_components_close(struct snd_pcm_substream *substream,
 }
 
 /*
+ * Called by ALSA when a PCM substream is closed. Private data can be
+ * freed here. The cpu DAI, codec DAI, machine and components are also
+ * shutdown.
+ */
+static int soc_pcm_close(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_component *component;
+	struct snd_soc_dai *dai;
+	int i;
+
+	mutex_lock_nested(&rtd->card->pcm_mutex, rtd->card->pcm_subclass);
+
+	snd_soc_runtime_deactivate(rtd, substream->stream);
+
+	for_each_rtd_dais(rtd, i, dai)
+		snd_soc_dai_shutdown(dai, substream);
+
+	soc_rtd_shutdown(rtd, substream);
+
+	soc_pcm_components_close(substream);
+
+	snd_soc_dapm_stream_stop(rtd, substream->stream);
+
+	mutex_unlock(&rtd->card->pcm_mutex);
+
+	for_each_rtd_components(rtd, i, component) {
+		pm_runtime_mark_last_busy(component->dev);
+		pm_runtime_put_autosuspend(component->dev);
+	}
+
+	for_each_rtd_components(rtd, i, component)
+		if (!component->active)
+			pinctrl_pm_select_sleep_state(component->dev);
+
+	return 0;
+}
+
+/*
  * Called by ALSA when a PCM substream is opened, the runtime->hw record is
  * then initialized and any private data can be allocated. This also calls
  * startup for the cpu DAI, component, machine and codec DAI.
@@ -536,9 +788,9 @@ static int soc_pcm_open(struct snd_pcm_substream *substream)
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct snd_soc_component *component;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-	struct snd_soc_dai *codec_dai;
+	struct snd_soc_dai *dai;
 	const char *codec_dai_name = "multicodec";
+	const char *cpu_dai_name = "multicpu";
 	int i, ret = 0;
 
 	for_each_rtd_components(rtd, i, component)
@@ -549,38 +801,31 @@ static int soc_pcm_open(struct snd_pcm_substream *substream)
 
 	mutex_lock_nested(&rtd->card->pcm_mutex, rtd->card->pcm_subclass);
 
-	/* startup the audio subsystem */
-	ret = snd_soc_dai_startup(cpu_dai, substream);
-	if (ret < 0) {
-		dev_err(cpu_dai->dev, "ASoC: can't open interface %s: %d\n",
-			cpu_dai->name, ret);
-		goto out;
-	}
-
-	ret = soc_pcm_components_open(substream, &component);
+	ret = soc_pcm_components_open(substream);
 	if (ret < 0)
 		goto component_err;
 
-	for_each_rtd_codec_dai(rtd, i, codec_dai) {
-		ret = snd_soc_dai_startup(codec_dai, substream);
-		if (ret < 0) {
-			dev_err(codec_dai->dev,
-				"ASoC: can't open codec %s: %d\n",
-				codec_dai->name, ret);
-			goto codec_dai_err;
-		}
-
-		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-			codec_dai->tx_mask = 0;
-		else
-			codec_dai->rx_mask = 0;
-	}
-
 	ret = soc_rtd_startup(rtd, substream);
 	if (ret < 0) {
 		pr_err("ASoC: %s startup failed: %d\n",
 		       rtd->dai_link->name, ret);
-		goto machine_err;
+		goto rtd_startup_err;
+	}
+
+	/* startup the audio subsystem */
+	for_each_rtd_dais(rtd, i, dai) {
+		ret = snd_soc_dai_startup(dai, substream);
+		if (ret < 0) {
+			dev_err(dai->dev,
+				"ASoC: can't open DAI %s: %d\n",
+				dai->name, ret);
+			goto config_err;
+		}
+
+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+			dai->tx_mask = 0;
+		else
+			dai->rx_mask = 0;
 	}
 
 	/* Dynamic PCM DAI links compat checks use dynamic capabilities */
@@ -593,46 +838,43 @@ static int soc_pcm_open(struct snd_pcm_substream *substream)
 	if (rtd->num_codecs == 1)
 		codec_dai_name = rtd->codec_dai->name;
 
+	if (rtd->num_cpus == 1)
+		cpu_dai_name = rtd->cpu_dai->name;
+
 	if (soc_pcm_has_symmetry(substream))
 		runtime->hw.info |= SNDRV_PCM_INFO_JOINT_DUPLEX;
 
 	ret = -EINVAL;
 	if (!runtime->hw.rates) {
 		printk(KERN_ERR "ASoC: %s <-> %s No matching rates\n",
-			codec_dai_name, cpu_dai->name);
+			codec_dai_name, cpu_dai_name);
 		goto config_err;
 	}
 	if (!runtime->hw.formats) {
 		printk(KERN_ERR "ASoC: %s <-> %s No matching formats\n",
-			codec_dai_name, cpu_dai->name);
+			codec_dai_name, cpu_dai_name);
 		goto config_err;
 	}
 	if (!runtime->hw.channels_min || !runtime->hw.channels_max ||
 	    runtime->hw.channels_min > runtime->hw.channels_max) {
 		printk(KERN_ERR "ASoC: %s <-> %s No matching channels\n",
-				codec_dai_name, cpu_dai->name);
+				codec_dai_name, cpu_dai_name);
 		goto config_err;
 	}
 
 	soc_pcm_apply_msb(substream);
 
 	/* Symmetry only applies if we've already got an active stream. */
-	if (cpu_dai->active) {
-		ret = soc_pcm_apply_symmetry(substream, cpu_dai);
-		if (ret != 0)
-			goto config_err;
-	}
-
-	for_each_rtd_codec_dai(rtd, i, codec_dai) {
-		if (codec_dai->active) {
-			ret = soc_pcm_apply_symmetry(substream, codec_dai);
+	for_each_rtd_dais(rtd, i, dai) {
+		if (dai->active) {
+			ret = soc_pcm_apply_symmetry(substream, dai);
 			if (ret != 0)
 				goto config_err;
 		}
 	}
 
 	pr_debug("ASoC: %s <-> %s info:\n",
-			codec_dai_name, cpu_dai->name);
+		 codec_dai_name, cpu_dai_name);
 	pr_debug("ASoC: rate mask 0x%x\n", runtime->hw.rates);
 	pr_debug("ASoC: min ch %d max ch %d\n", runtime->hw.channels_min,
 		 runtime->hw.channels_max);
@@ -647,20 +889,13 @@ static int soc_pcm_open(struct snd_pcm_substream *substream)
 	return 0;
 
 config_err:
+	for_each_rtd_dais(rtd, i, dai)
+		snd_soc_dai_shutdown(dai, substream);
+
 	soc_rtd_shutdown(rtd, substream);
-
-machine_err:
-	i = rtd->num_codecs;
-
-codec_dai_err:
-	for_each_rtd_codec_dai_rollback(rtd, i, codec_dai)
-		snd_soc_dai_shutdown(codec_dai, substream);
-
+rtd_startup_err:
+	soc_pcm_components_close(substream);
 component_err:
-	soc_pcm_components_close(substream, component);
-
-	snd_soc_dai_shutdown(cpu_dai, substream);
-out:
 	mutex_unlock(&rtd->card->pcm_mutex);
 
 	for_each_rtd_components(rtd, i, component) {
@@ -686,59 +921,6 @@ static void codec2codec_close_delayed_work(struct snd_soc_pcm_runtime *rtd)
 }
 
 /*
- * Called by ALSA when a PCM substream is closed. Private data can be
- * freed here. The cpu DAI, codec DAI, machine and components are also
- * shutdown.
- */
-static int soc_pcm_close(struct snd_pcm_substream *substream)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_component *component;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-	struct snd_soc_dai *codec_dai;
-	int i;
-
-	mutex_lock_nested(&rtd->card->pcm_mutex, rtd->card->pcm_subclass);
-
-	snd_soc_runtime_deactivate(rtd, substream->stream);
-
-	/* clear the corresponding DAIs rate when inactive */
-	if (!cpu_dai->active)
-		cpu_dai->rate = 0;
-
-	for_each_rtd_codec_dai(rtd, i, codec_dai) {
-		if (!codec_dai->active)
-			codec_dai->rate = 0;
-	}
-
-	snd_soc_dai_digital_mute(cpu_dai, 1, substream->stream);
-
-	snd_soc_dai_shutdown(cpu_dai, substream);
-
-	for_each_rtd_codec_dai(rtd, i, codec_dai)
-		snd_soc_dai_shutdown(codec_dai, substream);
-
-	soc_rtd_shutdown(rtd, substream);
-
-	soc_pcm_components_close(substream, NULL);
-
-	snd_soc_dapm_stream_stop(rtd, substream->stream);
-
-	mutex_unlock(&rtd->card->pcm_mutex);
-
-	for_each_rtd_components(rtd, i, component) {
-		pm_runtime_mark_last_busy(component->dev);
-		pm_runtime_put_autosuspend(component->dev);
-	}
-
-	for_each_rtd_components(rtd, i, component)
-		if (!component->active)
-			pinctrl_pm_select_sleep_state(component->dev);
-
-	return 0;
-}
-
-/*
  * Called by ALSA when the PCM substream is prepared, can set format, sample
  * rate, etc.  This function is non atomic and can be called multiple times,
  * it can refer to the runtime info.
@@ -747,8 +929,7 @@ static int soc_pcm_prepare(struct snd_pcm_substream *substream)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_component *component;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-	struct snd_soc_dai *codec_dai;
+	struct snd_soc_dai *dai;
 	int i, ret = 0;
 
 	mutex_lock_nested(&rtd->card->pcm_mutex, rtd->card->pcm_subclass);
@@ -769,23 +950,15 @@ static int soc_pcm_prepare(struct snd_pcm_substream *substream)
 		}
 	}
 
-	for_each_rtd_codec_dai(rtd, i, codec_dai) {
-		ret = snd_soc_dai_prepare(codec_dai, substream);
+	for_each_rtd_dais(rtd, i, dai) {
+		ret = snd_soc_dai_prepare(dai, substream);
 		if (ret < 0) {
-			dev_err(codec_dai->dev,
-				"ASoC: codec DAI prepare error: %d\n",
-				ret);
+			dev_err(dai->dev,
+				"ASoC: DAI prepare error: %d\n", ret);
 			goto out;
 		}
 	}
 
-	ret = snd_soc_dai_prepare(cpu_dai, substream);
-	if (ret < 0) {
-		dev_err(cpu_dai->dev,
-			"ASoC: cpu DAI prepare error: %d\n", ret);
-		goto out;
-	}
-
 	/* cancel any delayed stream shutdown that is pending */
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK &&
 	    rtd->pop_wait) {
@@ -796,10 +969,8 @@ static int soc_pcm_prepare(struct snd_pcm_substream *substream)
 	snd_soc_dapm_stream_event(rtd, substream->stream,
 			SND_SOC_DAPM_STREAM_START);
 
-	for_each_rtd_codec_dai(rtd, i, codec_dai)
-		snd_soc_dai_digital_mute(codec_dai, 0,
-					 substream->stream);
-	snd_soc_dai_digital_mute(cpu_dai, 0, substream->stream);
+	for_each_rtd_dais(rtd, i, dai)
+		snd_soc_dai_digital_mute(dai, 0, substream->stream);
 
 out:
 	mutex_unlock(&rtd->card->pcm_mutex);
@@ -822,13 +993,15 @@ static int soc_pcm_components_hw_free(struct snd_pcm_substream *substream,
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_component *component;
-	int i, ret = 0;
+	int i, r, ret = 0;
 
 	for_each_rtd_components(rtd, i, component) {
 		if (component == last)
 			break;
 
-		ret |= snd_soc_component_hw_free(component, substream);
+		r = snd_soc_component_hw_free(component, substream);
+		if (r < 0)
+			ret = r; /* use last ret */
 	}
 
 	return ret;
@@ -844,7 +1017,7 @@ static int soc_pcm_hw_params(struct snd_pcm_substream *substream,
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_component *component;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *cpu_dai;
 	struct snd_soc_dai *codec_dai;
 	int i, ret = 0;
 
@@ -861,7 +1034,7 @@ static int soc_pcm_hw_params(struct snd_pcm_substream *substream,
 		goto out;
 	}
 
-	for_each_rtd_codec_dai(rtd, i, codec_dai) {
+	for_each_rtd_codec_dais(rtd, i, codec_dai) {
 		struct snd_pcm_hw_params codec_params;
 
 		/*
@@ -908,17 +1081,26 @@ static int soc_pcm_hw_params(struct snd_pcm_substream *substream,
 		snd_soc_dapm_update_dai(substream, &codec_params, codec_dai);
 	}
 
-	ret = snd_soc_dai_hw_params(cpu_dai, substream, params);
-	if (ret < 0)
-		goto interface_err;
+	for_each_rtd_cpu_dais(rtd, i, cpu_dai) {
+		/*
+		 * Skip CPUs which don't support the current stream
+		 * type. See soc_pcm_init_runtime_hw() for more details
+		 */
+		if (!snd_soc_dai_stream_valid(cpu_dai, substream->stream))
+			continue;
 
-	/* store the parameters for each DAIs */
-	cpu_dai->rate = params_rate(params);
-	cpu_dai->channels = params_channels(params);
-	cpu_dai->sample_bits =
-		snd_pcm_format_physical_width(params_format(params));
+		ret = snd_soc_dai_hw_params(cpu_dai, substream, params);
+		if (ret < 0)
+			goto interface_err;
 
-	snd_soc_dapm_update_dai(substream, params, cpu_dai);
+		/* store the parameters for each DAI */
+		cpu_dai->rate = params_rate(params);
+		cpu_dai->channels = params_channels(params);
+		cpu_dai->sample_bits =
+			snd_pcm_format_physical_width(params_format(params));
+
+		snd_soc_dapm_update_dai(substream, params, cpu_dai);
+	}
 
 	for_each_rtd_components(rtd, i, component) {
 		ret = snd_soc_component_hw_params(component, substream, params);
@@ -938,14 +1120,21 @@ static int soc_pcm_hw_params(struct snd_pcm_substream *substream,
 component_err:
 	soc_pcm_components_hw_free(substream, component);
 
-	snd_soc_dai_hw_free(cpu_dai, substream);
-	cpu_dai->rate = 0;
+	i = rtd->num_cpus;
 
 interface_err:
+	for_each_rtd_cpu_dais_rollback(rtd, i, cpu_dai) {
+		if (!snd_soc_dai_stream_valid(cpu_dai, substream->stream))
+			continue;
+
+		snd_soc_dai_hw_free(cpu_dai, substream);
+		cpu_dai->rate = 0;
+	}
+
 	i = rtd->num_codecs;
 
 codec_err:
-	for_each_rtd_codec_dai_rollback(rtd, i, codec_dai) {
+	for_each_rtd_codec_dais_rollback(rtd, i, codec_dai) {
 		if (!snd_soc_dai_stream_valid(codec_dai, substream->stream))
 			continue;
 
@@ -965,34 +1154,23 @@ static int soc_pcm_hw_params(struct snd_pcm_substream *substream,
 static int soc_pcm_hw_free(struct snd_pcm_substream *substream)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-	struct snd_soc_dai *codec_dai;
-	bool playback = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
+	struct snd_soc_dai *dai;
 	int i;
 
 	mutex_lock_nested(&rtd->card->pcm_mutex, rtd->card->pcm_subclass);
 
 	/* clear the corresponding DAIs parameters when going to be inactive */
-	if (cpu_dai->active == 1) {
-		cpu_dai->rate = 0;
-		cpu_dai->channels = 0;
-		cpu_dai->sample_bits = 0;
-	}
+	for_each_rtd_dais(rtd, i, dai) {
+		int active = dai->stream_active[substream->stream];
 
-	for_each_rtd_codec_dai(rtd, i, codec_dai) {
-		if (codec_dai->active == 1) {
-			codec_dai->rate = 0;
-			codec_dai->channels = 0;
-			codec_dai->sample_bits = 0;
+		if (dai->active == 1) {
+			dai->rate = 0;
+			dai->channels = 0;
+			dai->sample_bits = 0;
 		}
-	}
 
-	/* apply codec digital mute */
-	for_each_rtd_codec_dai(rtd, i, codec_dai) {
-		if ((playback && codec_dai->playback_active == 1) ||
-		    (!playback && codec_dai->capture_active == 1))
-			snd_soc_dai_digital_mute(codec_dai, 1,
-						 substream->stream);
+		if (active == 1)
+			snd_soc_dai_digital_mute(dai, 1, substream->stream);
 	}
 
 	/* free any machine hw params */
@@ -1002,15 +1180,13 @@ static int soc_pcm_hw_free(struct snd_pcm_substream *substream)
 	soc_pcm_components_hw_free(substream, NULL);
 
 	/* now free hw params for the DAIs  */
-	for_each_rtd_codec_dai(rtd, i, codec_dai) {
-		if (!snd_soc_dai_stream_valid(codec_dai, substream->stream))
+	for_each_rtd_dais(rtd, i, dai) {
+		if (!snd_soc_dai_stream_valid(dai, substream->stream))
 			continue;
 
-		snd_soc_dai_hw_free(codec_dai, substream);
+		snd_soc_dai_hw_free(dai, substream);
 	}
 
-	snd_soc_dai_hw_free(cpu_dai, substream);
-
 	mutex_unlock(&rtd->card->pcm_mutex);
 	return 0;
 }
@@ -1019,8 +1195,7 @@ static int soc_pcm_trigger_start(struct snd_pcm_substream *substream, int cmd)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_component *component;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-	struct snd_soc_dai *codec_dai;
+	struct snd_soc_dai *dai;
 	int i, ret;
 
 	ret = soc_rtd_trigger(rtd, substream, cmd);
@@ -1033,12 +1208,8 @@ static int soc_pcm_trigger_start(struct snd_pcm_substream *substream, int cmd)
 			return ret;
 	}
 
-	ret = snd_soc_dai_trigger(cpu_dai, substream, cmd);
-	if (ret < 0)
-		return ret;
-
-	for_each_rtd_codec_dai(rtd, i, codec_dai) {
-		ret = snd_soc_dai_trigger(codec_dai, substream, cmd);
+	for_each_rtd_dais(rtd, i, dai) {
+		ret = snd_soc_dai_trigger(dai, substream, cmd);
 		if (ret < 0)
 			return ret;
 	}
@@ -1050,20 +1221,15 @@ static int soc_pcm_trigger_stop(struct snd_pcm_substream *substream, int cmd)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_component *component;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-	struct snd_soc_dai *codec_dai;
+	struct snd_soc_dai *dai;
 	int i, ret;
 
-	for_each_rtd_codec_dai(rtd, i, codec_dai) {
-		ret = snd_soc_dai_trigger(codec_dai, substream, cmd);
+	for_each_rtd_dais(rtd, i, dai) {
+		ret = snd_soc_dai_trigger(dai, substream, cmd);
 		if (ret < 0)
 			return ret;
 	}
 
-	ret = snd_soc_dai_trigger(cpu_dai, substream, cmd);
-	if (ret < 0)
-		return ret;
-
 	for_each_rtd_components(rtd, i, component) {
 		ret = snd_soc_component_trigger(component, substream, cmd);
 		if (ret < 0)
@@ -1103,20 +1269,15 @@ static int soc_pcm_bespoke_trigger(struct snd_pcm_substream *substream,
 				   int cmd)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-	struct snd_soc_dai *codec_dai;
+	struct snd_soc_dai *dai;
 	int i, ret;
 
-	for_each_rtd_codec_dai(rtd, i, codec_dai) {
-		ret = snd_soc_dai_bespoke_trigger(codec_dai, substream, cmd);
+	for_each_rtd_dais(rtd, i, dai) {
+		ret = snd_soc_dai_bespoke_trigger(dai, substream, cmd);
 		if (ret < 0)
 			return ret;
 	}
 
-	ret = snd_soc_dai_bespoke_trigger(cpu_dai, substream, cmd);
-	if (ret < 0)
-		return ret;
-
 	return 0;
 }
 /*
@@ -1127,12 +1288,13 @@ static int soc_pcm_bespoke_trigger(struct snd_pcm_substream *substream,
 static snd_pcm_uframes_t soc_pcm_pointer(struct snd_pcm_substream *substream)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *cpu_dai;
 	struct snd_soc_dai *codec_dai;
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	snd_pcm_uframes_t offset = 0;
 	snd_pcm_sframes_t delay = 0;
 	snd_pcm_sframes_t codec_delay = 0;
+	snd_pcm_sframes_t cpu_delay = 0;
 	int i;
 
 	/* clearing the previous total delay */
@@ -1143,9 +1305,13 @@ static snd_pcm_uframes_t soc_pcm_pointer(struct snd_pcm_substream *substream)
 	/* base delay if assigned in pointer callback */
 	delay = runtime->delay;
 
-	delay += snd_soc_dai_delay(cpu_dai, substream);
+	for_each_rtd_cpu_dais(rtd, i, cpu_dai) {
+		cpu_delay = max(cpu_delay,
+				snd_soc_dai_delay(cpu_dai, substream));
+	}
+	delay += cpu_delay;
 
-	for_each_rtd_codec_dai(rtd, i, codec_dai) {
+	for_each_rtd_codec_dais(rtd, i, codec_dai) {
 		codec_delay = max(codec_delay,
 				  snd_soc_dai_delay(codec_dai, substream));
 	}
@@ -1162,9 +1328,6 @@ static int dpcm_be_connect(struct snd_soc_pcm_runtime *fe,
 {
 	struct snd_soc_dpcm *dpcm;
 	unsigned long flags;
-#ifdef CONFIG_DEBUG_FS
-	char *name;
-#endif
 
 	/* only add new dpcms */
 	for_each_dpcm_be(fe, stream, dpcm) {
@@ -1189,17 +1352,8 @@ static int dpcm_be_connect(struct snd_soc_pcm_runtime *fe,
 			stream ? "capture" : "playback",  fe->dai_link->name,
 			stream ? "<-" : "->", be->dai_link->name);
 
-#ifdef CONFIG_DEBUG_FS
-	name = kasprintf(GFP_KERNEL, "%s:%s", be->dai_link->name,
-			 stream ? "capture" : "playback");
-	if (name) {
-		dpcm->debugfs_state = debugfs_create_dir(name,
-							 fe->debugfs_dpcm_root);
-		debugfs_create_u32("state", 0644, dpcm->debugfs_state,
-				   &dpcm->state);
-		kfree(name);
-	}
-#endif
+	dpcm_create_debugfs_state(dpcm, stream);
+
 	return 1;
 }
 
@@ -1252,9 +1406,8 @@ void dpcm_be_disconnect(struct snd_soc_pcm_runtime *fe, int stream)
 		/* BEs still alive need new FE */
 		dpcm_be_reparent(fe, dpcm->be, stream);
 
-#ifdef CONFIG_DEBUG_FS
-		debugfs_remove_recursive(dpcm->debugfs_state);
-#endif
+		dpcm_remove_debugfs_state(dpcm);
+
 		spin_lock_irqsave(&fe->card->dpcm_lock, flags);
 		list_del(&dpcm->list_be);
 		list_del(&dpcm->list_fe);
@@ -1268,74 +1421,41 @@ static struct snd_soc_pcm_runtime *dpcm_get_be(struct snd_soc_card *card,
 		struct snd_soc_dapm_widget *widget, int stream)
 {
 	struct snd_soc_pcm_runtime *be;
+	struct snd_soc_dapm_widget *w;
 	struct snd_soc_dai *dai;
 	int i;
 
 	dev_dbg(card->dev, "ASoC: find BE for widget %s\n", widget->name);
 
-	if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
-		for_each_card_rtds(card, be) {
+	for_each_card_rtds(card, be) {
 
-			if (!be->dai_link->no_pcm)
-				continue;
+		if (!be->dai_link->no_pcm)
+			continue;
+
+		for_each_rtd_dais(be, i, dai) {
+			w = snd_soc_dai_get_widget(dai, stream);
 
 			dev_dbg(card->dev, "ASoC: try BE : %s\n",
-				be->cpu_dai->playback_widget ?
-				be->cpu_dai->playback_widget->name : "(not set)");
+				w ? w->name : "(not set)");
 
-			if (be->cpu_dai->playback_widget == widget)
+			if (w == widget)
 				return be;
-
-			for_each_rtd_codec_dai(be, i, dai) {
-				if (dai->playback_widget == widget)
-					return be;
-			}
-		}
-	} else {
-
-		for_each_card_rtds(card, be) {
-
-			if (!be->dai_link->no_pcm)
-				continue;
-
-			dev_dbg(card->dev, "ASoC: try BE %s\n",
-				be->cpu_dai->capture_widget ?
-				be->cpu_dai->capture_widget->name : "(not set)");
-
-			if (be->cpu_dai->capture_widget == widget)
-				return be;
-
-			for_each_rtd_codec_dai(be, i, dai) {
-				if (dai->capture_widget == widget)
-					return be;
-			}
 		}
 	}
 
-	/* dai link name and stream name set correctly ? */
-	dev_err(card->dev, "ASoC: can't get %s BE for %s\n",
-		stream ? "capture" : "playback", widget->name);
+	/* Widget provided is not a BE */
 	return NULL;
 }
 
-static inline struct snd_soc_dapm_widget *
-	dai_get_widget(struct snd_soc_dai *dai, int stream)
-{
-	if (stream == SNDRV_PCM_STREAM_PLAYBACK)
-		return dai->playback_widget;
-	else
-		return dai->capture_widget;
-}
-
 static int widget_in_list(struct snd_soc_dapm_widget_list *list,
 		struct snd_soc_dapm_widget *widget)
 {
+	struct snd_soc_dapm_widget *w;
 	int i;
 
-	for (i = 0; i < list->num_widgets; i++) {
-		if (widget == list->widgets[i])
+	for_each_dapm_widgets(list, i, w)
+		if (widget == w)
 			return 1;
-	}
 
 	return 0;
 }
@@ -1345,36 +1465,17 @@ static bool dpcm_end_walk_at_be(struct snd_soc_dapm_widget *widget,
 {
 	struct snd_soc_card *card = widget->dapm->card;
 	struct snd_soc_pcm_runtime *rtd;
-	struct snd_soc_dai *dai;
-	int i;
+	int stream;
 
-	if (dir == SND_SOC_DAPM_DIR_OUT) {
-		for_each_card_rtds(card, rtd) {
-			if (!rtd->dai_link->no_pcm)
-				continue;
+	/* adjust dir to stream */
+	if (dir == SND_SOC_DAPM_DIR_OUT)
+		stream = SNDRV_PCM_STREAM_PLAYBACK;
+	else
+		stream = SNDRV_PCM_STREAM_CAPTURE;
 
-			if (rtd->cpu_dai->playback_widget == widget)
-				return true;
-
-			for_each_rtd_codec_dai(rtd, i, dai) {
-				if (dai->playback_widget == widget)
-					return true;
-			}
-		}
-	} else { /* SND_SOC_DAPM_DIR_IN */
-		for_each_card_rtds(card, rtd) {
-			if (!rtd->dai_link->no_pcm)
-				continue;
-
-			if (rtd->cpu_dai->capture_widget == widget)
-				return true;
-
-			for_each_rtd_codec_dai(rtd, i, dai) {
-				if (dai->capture_widget == widget)
-					return true;
-			}
-		}
-	}
+	rtd = dpcm_get_be(card, widget, stream);
+	if (rtd)
+		return true;
 
 	return false;
 }
@@ -1385,6 +1486,12 @@ int dpcm_path_get(struct snd_soc_pcm_runtime *fe,
 	struct snd_soc_dai *cpu_dai = fe->cpu_dai;
 	int paths;
 
+	if (fe->num_cpus > 1) {
+		dev_err(fe->dev,
+			"%s doesn't support Multi CPU yet\n", __func__);
+		return -EINVAL;
+	}
+
 	/* get number of valid DAI paths and their widgets */
 	paths = snd_soc_dapm_dai_get_connected_widgets(cpu_dai, stream, list,
 			dpcm_end_walk_at_be);
@@ -1395,37 +1502,42 @@ int dpcm_path_get(struct snd_soc_pcm_runtime *fe,
 	return paths;
 }
 
-static int dpcm_prune_paths(struct snd_soc_pcm_runtime *fe, int stream,
-	struct snd_soc_dapm_widget_list **list_)
+void dpcm_path_put(struct snd_soc_dapm_widget_list **list)
 {
-	struct snd_soc_dpcm *dpcm;
-	struct snd_soc_dapm_widget_list *list = *list_;
+	snd_soc_dapm_dai_free_widgets(list);
+}
+
+static bool dpcm_be_is_active(struct snd_soc_dpcm *dpcm, int stream,
+			      struct snd_soc_dapm_widget_list *list)
+{
 	struct snd_soc_dapm_widget *widget;
 	struct snd_soc_dai *dai;
+	unsigned int i;
+
+	/* is there a valid DAI widget for this BE */
+	for_each_rtd_dais(dpcm->be, i, dai) {
+		widget = snd_soc_dai_get_widget(dai, stream);
+
+		/*
+		 * The BE is pruned only if none of the dai
+		 * widgets are in the active list.
+		 */
+		if (widget && widget_in_list(list, widget))
+			return true;
+	}
+
+	return false;
+}
+
+static int dpcm_prune_paths(struct snd_soc_pcm_runtime *fe, int stream,
+			    struct snd_soc_dapm_widget_list **list_)
+{
+	struct snd_soc_dpcm *dpcm;
 	int prune = 0;
-	int do_prune;
 
 	/* Destroy any old FE <--> BE connections */
 	for_each_dpcm_be(fe, stream, dpcm) {
-		unsigned int i;
-
-		/* is there a valid CPU DAI widget for this BE */
-		widget = dai_get_widget(dpcm->be->cpu_dai, stream);
-
-		/* prune the BE if it's no longer in our active list */
-		if (widget && widget_in_list(list, widget))
-			continue;
-
-		/* is there a valid CODEC DAI widget for this BE */
-		do_prune = 1;
-		for_each_rtd_codec_dai(dpcm->be, i, dai) {
-			widget = dai_get_widget(dai, stream);
-
-			/* prune the BE if it's no longer in our active list */
-			if (widget && widget_in_list(list, widget))
-				do_prune = 0;
-		}
-		if (!do_prune)
+		if (dpcm_be_is_active(dpcm, stream, *list_))
 			continue;
 
 		dev_dbg(fe->dev, "ASoC: pruning %s BE %s for %s\n",
@@ -1446,12 +1558,13 @@ static int dpcm_add_paths(struct snd_soc_pcm_runtime *fe, int stream,
 	struct snd_soc_card *card = fe->card;
 	struct snd_soc_dapm_widget_list *list = *list_;
 	struct snd_soc_pcm_runtime *be;
+	struct snd_soc_dapm_widget *widget;
 	int i, new = 0, err;
 
 	/* Create any new FE <--> BE connections */
-	for (i = 0; i < list->num_widgets; i++) {
+	for_each_dapm_widgets(list, i, widget) {
 
-		switch (list->widgets[i]->id) {
+		switch (widget->id) {
 		case snd_soc_dapm_dai_in:
 			if (stream != SNDRV_PCM_STREAM_PLAYBACK)
 				continue;
@@ -1465,17 +1578,13 @@ static int dpcm_add_paths(struct snd_soc_pcm_runtime *fe, int stream,
 		}
 
 		/* is there a valid BE rtd for this widget */
-		be = dpcm_get_be(card, list->widgets[i], stream);
+		be = dpcm_get_be(card, widget, stream);
 		if (!be) {
 			dev_err(fe->dev, "ASoC: no BE found for %s\n",
-					list->widgets[i]->name);
+					widget->name);
 			continue;
 		}
 
-		/* make sure BE is a real BE */
-		if (!be->dai_link->no_pcm)
-			continue;
-
 		/* don't connect if FE is not running */
 		if (!fe->dpcm[stream].runtime && !fe->fe_compr)
 			continue;
@@ -1484,7 +1593,7 @@ static int dpcm_add_paths(struct snd_soc_pcm_runtime *fe, int stream,
 		err = dpcm_be_connect(fe, be, stream);
 		if (err < 0) {
 			dev_err(fe->dev, "ASoC: can't connect %s\n",
-				list->widgets[i]->name);
+				widget->name);
 			break;
 		} else if (err == 0) /* already connected */
 			continue;
@@ -1671,11 +1780,10 @@ static void dpcm_runtime_merge_format(struct snd_pcm_substream *substream,
 
 	for_each_dpcm_be(fe, stream, dpcm) {
 		struct snd_soc_pcm_runtime *be = dpcm->be;
-		struct snd_soc_dai_driver *codec_dai_drv;
 		struct snd_soc_pcm_stream *codec_stream;
 		int i;
 
-		for_each_rtd_codec_dai(be, i, dai) {
+		for_each_rtd_codec_dais(be, i, dai) {
 			/*
 			 * Skip CODECs which don't support the current stream
 			 * type. See soc_pcm_init_runtime_hw() for more details
@@ -1683,11 +1791,7 @@ static void dpcm_runtime_merge_format(struct snd_pcm_substream *substream,
 			if (!snd_soc_dai_stream_valid(dai, stream))
 				continue;
 
-			codec_dai_drv = dai->driver;
-			if (stream == SNDRV_PCM_STREAM_PLAYBACK)
-				codec_stream = &codec_dai_drv->playback;
-			else
-				codec_stream = &codec_dai_drv->capture;
+			codec_stream = snd_soc_dai_get_pcm_stream(dai, stream);
 
 			*formats &= codec_stream->formats;
 		}
@@ -1712,30 +1816,33 @@ static void dpcm_runtime_merge_chan(struct snd_pcm_substream *substream,
 
 	for_each_dpcm_be(fe, stream, dpcm) {
 		struct snd_soc_pcm_runtime *be = dpcm->be;
-		struct snd_soc_dai_driver *cpu_dai_drv =  be->cpu_dai->driver;
-		struct snd_soc_dai_driver *codec_dai_drv;
 		struct snd_soc_pcm_stream *codec_stream;
 		struct snd_soc_pcm_stream *cpu_stream;
+		struct snd_soc_dai *dai;
+		int i;
 
-		if (stream == SNDRV_PCM_STREAM_PLAYBACK)
-			cpu_stream = &cpu_dai_drv->playback;
-		else
-			cpu_stream = &cpu_dai_drv->capture;
+		for_each_rtd_cpu_dais(be, i, dai) {
+			/*
+			 * Skip CPUs which don't support the current stream
+			 * type. See soc_pcm_init_runtime_hw() for more details
+			 */
+			if (!snd_soc_dai_stream_valid(dai, stream))
+				continue;
 
-		*channels_min = max(*channels_min, cpu_stream->channels_min);
-		*channels_max = min(*channels_max, cpu_stream->channels_max);
+			cpu_stream = snd_soc_dai_get_pcm_stream(dai, stream);
+
+			*channels_min = max(*channels_min,
+					    cpu_stream->channels_min);
+			*channels_max = min(*channels_max,
+					    cpu_stream->channels_max);
+		}
 
 		/*
 		 * chan min/max cannot be enforced if there are multiple CODEC
 		 * DAIs connected to a single CPU DAI, use CPU DAI's directly
 		 */
 		if (be->num_codecs == 1) {
-			codec_dai_drv = be->codec_dais[0]->driver;
-
-			if (stream == SNDRV_PCM_STREAM_PLAYBACK)
-				codec_stream = &codec_dai_drv->playback;
-			else
-				codec_stream = &codec_dai_drv->capture;
+			codec_stream = snd_soc_dai_get_pcm_stream(be->codec_dais[0], stream);
 
 			*channels_min = max(*channels_min,
 					    codec_stream->channels_min);
@@ -1764,41 +1871,23 @@ static void dpcm_runtime_merge_rate(struct snd_pcm_substream *substream,
 
 	for_each_dpcm_be(fe, stream, dpcm) {
 		struct snd_soc_pcm_runtime *be = dpcm->be;
-		struct snd_soc_dai_driver *cpu_dai_drv =  be->cpu_dai->driver;
-		struct snd_soc_dai_driver *codec_dai_drv;
-		struct snd_soc_pcm_stream *codec_stream;
-		struct snd_soc_pcm_stream *cpu_stream;
+		struct snd_soc_pcm_stream *pcm;
 		struct snd_soc_dai *dai;
 		int i;
 
-		if (stream == SNDRV_PCM_STREAM_PLAYBACK)
-			cpu_stream = &cpu_dai_drv->playback;
-		else
-			cpu_stream = &cpu_dai_drv->capture;
-
-		*rate_min = max(*rate_min, cpu_stream->rate_min);
-		*rate_max = min_not_zero(*rate_max, cpu_stream->rate_max);
-		*rates = snd_pcm_rate_mask_intersect(*rates, cpu_stream->rates);
-
-		for_each_rtd_codec_dai(be, i, dai) {
+		for_each_rtd_dais(be, i, dai) {
 			/*
-			 * Skip CODECs which don't support the current stream
+			 * Skip DAIs which don't support the current stream
 			 * type. See soc_pcm_init_runtime_hw() for more details
 			 */
 			if (!snd_soc_dai_stream_valid(dai, stream))
 				continue;
 
-			codec_dai_drv = dai->driver;
-			if (stream == SNDRV_PCM_STREAM_PLAYBACK)
-				codec_stream = &codec_dai_drv->playback;
-			else
-				codec_stream = &codec_dai_drv->capture;
+			pcm = snd_soc_dai_get_pcm_stream(dai, stream);
 
-			*rate_min = max(*rate_min, codec_stream->rate_min);
-			*rate_max = min_not_zero(*rate_max,
-						 codec_stream->rate_max);
-			*rates = snd_pcm_rate_mask_intersect(*rates,
-						codec_stream->rates);
+			*rate_min = max(*rate_min, pcm->rate_min);
+			*rate_max = min_not_zero(*rate_max, pcm->rate_max);
+			*rates = snd_pcm_rate_mask_intersect(*rates, pcm->rates);
 		}
 	}
 }
@@ -1807,13 +1896,21 @@ static void dpcm_set_fe_runtime(struct snd_pcm_substream *substream)
 {
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-	struct snd_soc_dai_driver *cpu_dai_drv = cpu_dai->driver;
+	struct snd_soc_dai *cpu_dai;
+	int i;
 
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-		dpcm_init_runtime_hw(runtime, &cpu_dai_drv->playback);
-	else
-		dpcm_init_runtime_hw(runtime, &cpu_dai_drv->capture);
+	for_each_rtd_cpu_dais(rtd, i, cpu_dai) {
+		/*
+		 * Skip CPUs which don't support the current stream
+		 * type. See soc_pcm_init_runtime_hw() for more details
+		 */
+		if (!snd_soc_dai_stream_valid(cpu_dai, substream->stream))
+			continue;
+
+		dpcm_init_runtime_hw(runtime,
+			snd_soc_dai_get_pcm_stream(cpu_dai,
+						   substream->stream));
+	}
 
 	dpcm_runtime_merge_format(substream, &runtime->hw.formats);
 	dpcm_runtime_merge_chan(substream, &runtime->hw.channels_min,
@@ -1850,18 +1947,21 @@ static int dpcm_apply_symmetry(struct snd_pcm_substream *fe_substream,
 {
 	struct snd_soc_dpcm *dpcm;
 	struct snd_soc_pcm_runtime *fe = fe_substream->private_data;
-	struct snd_soc_dai *fe_cpu_dai = fe->cpu_dai;
+	struct snd_soc_dai *fe_cpu_dai;
 	int err;
+	int i;
 
 	/* apply symmetry for FE */
 	if (soc_pcm_has_symmetry(fe_substream))
 		fe_substream->runtime->hw.info |= SNDRV_PCM_INFO_JOINT_DUPLEX;
 
-	/* Symmetry only applies if we've got an active stream. */
-	if (fe_cpu_dai->active) {
-		err = soc_pcm_apply_symmetry(fe_substream, fe_cpu_dai);
-		if (err < 0)
-			return err;
+	for_each_rtd_cpu_dais (fe, i, fe_cpu_dai) {
+		/* Symmetry only applies if we've got an active stream. */
+		if (fe_cpu_dai->active) {
+			err = soc_pcm_apply_symmetry(fe_substream, fe_cpu_dai);
+			if (err < 0)
+				return err;
+		}
 	}
 
 	/* apply symmetry for BE */
@@ -1870,7 +1970,7 @@ static int dpcm_apply_symmetry(struct snd_pcm_substream *fe_substream,
 		struct snd_pcm_substream *be_substream =
 			snd_soc_dpcm_get_substream(be, stream);
 		struct snd_soc_pcm_runtime *rtd;
-		struct snd_soc_dai *codec_dai;
+		struct snd_soc_dai *dai;
 		int i;
 
 		/* A backend may not have the requested substream */
@@ -1885,17 +1985,9 @@ static int dpcm_apply_symmetry(struct snd_pcm_substream *fe_substream,
 			be_substream->runtime->hw.info |= SNDRV_PCM_INFO_JOINT_DUPLEX;
 
 		/* Symmetry only applies if we've got an active stream. */
-		if (rtd->cpu_dai->active) {
-			err = soc_pcm_apply_symmetry(fe_substream,
-						     rtd->cpu_dai);
-			if (err < 0)
-				return err;
-		}
-
-		for_each_rtd_codec_dai(rtd, i, codec_dai) {
-			if (codec_dai->active) {
-				err = soc_pcm_apply_symmetry(fe_substream,
-							     codec_dai);
+		for_each_rtd_dais(rtd, i, dai) {
+			if (dai->active) {
+				err = soc_pcm_apply_symmetry(fe_substream, dai);
 				if (err < 0)
 					return err;
 			}
@@ -1913,7 +2005,7 @@ static int dpcm_fe_dai_startup(struct snd_pcm_substream *fe_substream)
 
 	dpcm_set_fe_update_state(fe, stream, SND_SOC_DPCM_UPDATE_FE);
 
-	ret = dpcm_be_dai_startup(fe, fe_substream->stream);
+	ret = dpcm_be_dai_startup(fe, stream);
 	if (ret < 0) {
 		dev_err(fe->dev,"ASoC: failed to start some BEs %d\n", ret);
 		goto be_err;
@@ -1934,17 +2026,13 @@ static int dpcm_fe_dai_startup(struct snd_pcm_substream *fe_substream)
 	snd_pcm_limit_hw_rates(runtime);
 
 	ret = dpcm_apply_symmetry(fe_substream, stream);
-	if (ret < 0) {
+	if (ret < 0)
 		dev_err(fe->dev, "ASoC: failed to apply dpcm symmetry %d\n",
 			ret);
-		goto unwind;
-	}
-
-	dpcm_set_fe_update_state(fe, stream, SND_SOC_DPCM_UPDATE_NO);
-	return 0;
 
 unwind:
-	dpcm_be_dai_startup_unwind(fe, fe_substream->stream);
+	if (ret < 0)
+		dpcm_be_dai_startup_unwind(fe, stream);
 be_err:
 	dpcm_set_fe_update_state(fe, stream, SND_SOC_DPCM_UPDATE_NO);
 	return ret;
@@ -1998,7 +2086,7 @@ static int dpcm_fe_dai_shutdown(struct snd_pcm_substream *substream)
 	dpcm_set_fe_update_state(fe, stream, SND_SOC_DPCM_UPDATE_FE);
 
 	/* shutdown the BEs */
-	dpcm_be_dai_shutdown(fe, substream->stream);
+	dpcm_be_dai_shutdown(fe, stream);
 
 	dev_dbg(fe->dev, "ASoC: close FE %s\n", fe->dai_link->name);
 
@@ -2176,9 +2264,9 @@ static int dpcm_fe_dai_hw_params(struct snd_pcm_substream *substream,
 	mutex_lock_nested(&fe->card->mutex, SND_SOC_CARD_CLASS_RUNTIME);
 	dpcm_set_fe_update_state(fe, stream, SND_SOC_DPCM_UPDATE_FE);
 
-	memcpy(&fe->dpcm[substream->stream].hw_params, params,
+	memcpy(&fe->dpcm[stream].hw_params, params,
 			sizeof(struct snd_pcm_hw_params));
-	ret = dpcm_be_dai_hw_params(fe, substream->stream);
+	ret = dpcm_be_dai_hw_params(fe, stream);
 	if (ret < 0) {
 		dev_err(fe->dev,"ASoC: hw_params BE failed %d\n", ret);
 		goto out;
@@ -2236,7 +2324,8 @@ int dpcm_be_dai_trigger(struct snd_soc_pcm_runtime *fe, int stream,
 		switch (cmd) {
 		case SNDRV_PCM_TRIGGER_START:
 			if ((be->dpcm[stream].state != SND_SOC_DPCM_STATE_PREPARE) &&
-			    (be->dpcm[stream].state != SND_SOC_DPCM_STATE_STOP))
+			    (be->dpcm[stream].state != SND_SOC_DPCM_STATE_STOP) &&
+			    (be->dpcm[stream].state != SND_SOC_DPCM_STATE_PAUSED))
 				continue;
 
 			ret = dpcm_do_trigger(dpcm, be_substream, cmd);
@@ -2266,7 +2355,8 @@ int dpcm_be_dai_trigger(struct snd_soc_pcm_runtime *fe, int stream,
 			be->dpcm[stream].state = SND_SOC_DPCM_STATE_START;
 			break;
 		case SNDRV_PCM_TRIGGER_STOP:
-			if (be->dpcm[stream].state != SND_SOC_DPCM_STATE_START)
+			if ((be->dpcm[stream].state != SND_SOC_DPCM_STATE_START) &&
+			    (be->dpcm[stream].state != SND_SOC_DPCM_STATE_PAUSED))
 				continue;
 
 			if (!snd_soc_dpcm_can_be_free_stop(fe, be, stream))
@@ -2500,7 +2590,7 @@ static int dpcm_fe_dai_prepare(struct snd_pcm_substream *substream)
 		goto out;
 	}
 
-	ret = dpcm_be_dai_prepare(fe, substream->stream);
+	ret = dpcm_be_dai_prepare(fe, stream);
 	if (ret < 0)
 		goto out;
 
@@ -2652,36 +2742,18 @@ static int dpcm_run_update_startup(struct snd_soc_pcm_runtime *fe, int stream)
 	return ret;
 }
 
-static int dpcm_run_new_update(struct snd_soc_pcm_runtime *fe, int stream)
-{
-	int ret;
-
-	dpcm_set_fe_update_state(fe, stream, SND_SOC_DPCM_UPDATE_BE);
-	ret = dpcm_run_update_startup(fe, stream);
-	if (ret < 0)
-		dev_err(fe->dev, "ASoC: failed to startup some BEs\n");
-	dpcm_set_fe_update_state(fe, stream, SND_SOC_DPCM_UPDATE_NO);
-
-	return ret;
-}
-
-static int dpcm_run_old_update(struct snd_soc_pcm_runtime *fe, int stream)
-{
-	int ret;
-
-	dpcm_set_fe_update_state(fe, stream, SND_SOC_DPCM_UPDATE_BE);
-	ret = dpcm_run_update_shutdown(fe, stream);
-	if (ret < 0)
-		dev_err(fe->dev, "ASoC: failed to shutdown some BEs\n");
-	dpcm_set_fe_update_state(fe, stream, SND_SOC_DPCM_UPDATE_NO);
-
-	return ret;
-}
-
 static int soc_dpcm_fe_runtime_update(struct snd_soc_pcm_runtime *fe, int new)
 {
 	struct snd_soc_dapm_widget_list *list;
+	int stream;
 	int count, paths;
+	int ret;
+
+	if (fe->num_cpus > 1) {
+		dev_err(fe->dev,
+			"%s doesn't support Multi CPU yet\n", __func__);
+		return -EINVAL;
+	}
 
 	if (!fe->dai_link->dynamic)
 		return 0;
@@ -2694,74 +2766,53 @@ static int soc_dpcm_fe_runtime_update(struct snd_soc_pcm_runtime *fe, int new)
 	dev_dbg(fe->dev, "ASoC: DPCM %s runtime update for FE %s\n",
 		new ? "new" : "old", fe->dai_link->name);
 
-	/* skip if FE doesn't have playback capability */
-	if (!snd_soc_dai_stream_valid(fe->cpu_dai,   SNDRV_PCM_STREAM_PLAYBACK) ||
-	    !snd_soc_dai_stream_valid(fe->codec_dai, SNDRV_PCM_STREAM_PLAYBACK))
-		goto capture;
+	for_each_pcm_streams(stream) {
 
-	/* skip if FE isn't currently playing */
-	if (!fe->cpu_dai->playback_active || !fe->codec_dai->playback_active)
-		goto capture;
+		/* skip if FE doesn't have playback/capture capability */
+		if (!snd_soc_dai_stream_valid(fe->cpu_dai,   stream) ||
+		    !snd_soc_dai_stream_valid(fe->codec_dai, stream))
+			continue;
 
-	paths = dpcm_path_get(fe, SNDRV_PCM_STREAM_PLAYBACK, &list);
-	if (paths < 0) {
-		dev_warn(fe->dev, "ASoC: %s no valid %s path\n",
-			 fe->dai_link->name,  "playback");
-		return paths;
+		/* skip if FE isn't currently playing/capturing */
+		if (!fe->cpu_dai->stream_active[stream] ||
+		    !fe->codec_dai->stream_active[stream])
+			continue;
+
+		paths = dpcm_path_get(fe, stream, &list);
+		if (paths < 0) {
+			dev_warn(fe->dev, "ASoC: %s no valid %s path\n",
+				 fe->dai_link->name,
+				 stream == SNDRV_PCM_STREAM_PLAYBACK ?
+				 "playback" : "capture");
+			return paths;
+		}
+
+		/* update any playback/capture paths */
+		count = dpcm_process_paths(fe, stream, &list, new);
+		if (count) {
+			dpcm_set_fe_update_state(fe, stream, SND_SOC_DPCM_UPDATE_BE);
+			if (new)
+				ret = dpcm_run_update_startup(fe, stream);
+			else
+				ret = dpcm_run_update_shutdown(fe, stream);
+			if (ret < 0)
+				dev_err(fe->dev, "ASoC: failed to shutdown some BEs\n");
+			dpcm_set_fe_update_state(fe, stream, SND_SOC_DPCM_UPDATE_NO);
+
+			dpcm_clear_pending_state(fe, stream);
+			dpcm_be_disconnect(fe, stream);
+		}
+
+		dpcm_path_put(&list);
 	}
 
-	/* update any playback paths */
-	count = dpcm_process_paths(fe, SNDRV_PCM_STREAM_PLAYBACK, &list, new);
-	if (count) {
-		if (new)
-			dpcm_run_new_update(fe, SNDRV_PCM_STREAM_PLAYBACK);
-		else
-			dpcm_run_old_update(fe, SNDRV_PCM_STREAM_PLAYBACK);
-
-		dpcm_clear_pending_state(fe, SNDRV_PCM_STREAM_PLAYBACK);
-		dpcm_be_disconnect(fe, SNDRV_PCM_STREAM_PLAYBACK);
-	}
-
-	dpcm_path_put(&list);
-
-capture:
-	/* skip if FE doesn't have capture capability */
-	if (!snd_soc_dai_stream_valid(fe->cpu_dai,   SNDRV_PCM_STREAM_CAPTURE) ||
-	    !snd_soc_dai_stream_valid(fe->codec_dai, SNDRV_PCM_STREAM_CAPTURE))
-		return 0;
-
-	/* skip if FE isn't currently capturing */
-	if (!fe->cpu_dai->capture_active || !fe->codec_dai->capture_active)
-		return 0;
-
-	paths = dpcm_path_get(fe, SNDRV_PCM_STREAM_CAPTURE, &list);
-	if (paths < 0) {
-		dev_warn(fe->dev, "ASoC: %s no valid %s path\n",
-			 fe->dai_link->name,  "capture");
-		return paths;
-	}
-
-	/* update any old capture paths */
-	count = dpcm_process_paths(fe, SNDRV_PCM_STREAM_CAPTURE, &list, new);
-	if (count) {
-		if (new)
-			dpcm_run_new_update(fe, SNDRV_PCM_STREAM_CAPTURE);
-		else
-			dpcm_run_old_update(fe, SNDRV_PCM_STREAM_CAPTURE);
-
-		dpcm_clear_pending_state(fe, SNDRV_PCM_STREAM_CAPTURE);
-		dpcm_be_disconnect(fe, SNDRV_PCM_STREAM_CAPTURE);
-	}
-
-	dpcm_path_put(&list);
-
 	return 0;
 }
 
 /* Called by DAPM mixer/mux changes to update audio routing between PCMs and
  * any DAI links.
  */
-int soc_dpcm_runtime_update(struct snd_soc_card *card)
+int snd_soc_dpcm_runtime_update(struct snd_soc_card *card)
 {
 	struct snd_soc_pcm_runtime *fe;
 	int ret = 0;
@@ -2785,38 +2836,40 @@ int soc_dpcm_runtime_update(struct snd_soc_card *card)
 	mutex_unlock(&card->mutex);
 	return ret;
 }
-int soc_dpcm_be_digital_mute(struct snd_soc_pcm_runtime *fe, int mute)
+EXPORT_SYMBOL_GPL(snd_soc_dpcm_runtime_update);
+
+static void dpcm_fe_dai_cleanup(struct snd_pcm_substream *fe_substream)
 {
+	struct snd_soc_pcm_runtime *fe = fe_substream->private_data;
 	struct snd_soc_dpcm *dpcm;
-	struct snd_soc_dai *dai;
+	int stream = fe_substream->stream;
 
-	for_each_dpcm_be(fe, SNDRV_PCM_STREAM_PLAYBACK, dpcm) {
+	/* mark FE's links ready to prune */
+	for_each_dpcm_be(fe, stream, dpcm)
+		dpcm->state = SND_SOC_DPCM_LINK_STATE_FREE;
 
-		struct snd_soc_pcm_runtime *be = dpcm->be;
-		int i;
+	dpcm_be_disconnect(fe, stream);
 
-		if (be->dai_link->ignore_suspend)
-			continue;
+	fe->dpcm[stream].runtime = NULL;
+}
 
-		for_each_rtd_codec_dai(be, i, dai) {
-			struct snd_soc_dai_driver *drv = dai->driver;
+static int dpcm_fe_dai_close(struct snd_pcm_substream *fe_substream)
+{
+	struct snd_soc_pcm_runtime *fe = fe_substream->private_data;
+	int ret;
 
-			dev_dbg(be->dev, "ASoC: BE digital mute %s\n",
-					 be->dai_link->name);
+	mutex_lock_nested(&fe->card->mutex, SND_SOC_CARD_CLASS_RUNTIME);
+	ret = dpcm_fe_dai_shutdown(fe_substream);
 
-			if (drv->ops && drv->ops->digital_mute &&
-							dai->playback_active)
-				drv->ops->digital_mute(dai, mute);
-		}
-	}
+	dpcm_fe_dai_cleanup(fe_substream);
 
-	return 0;
+	mutex_unlock(&fe->card->mutex);
+	return ret;
 }
 
 static int dpcm_fe_dai_open(struct snd_pcm_substream *fe_substream)
 {
 	struct snd_soc_pcm_runtime *fe = fe_substream->private_data;
-	struct snd_soc_dpcm *dpcm;
 	struct snd_soc_dapm_widget_list *list;
 	int ret;
 	int stream = fe_substream->stream;
@@ -2826,8 +2879,7 @@ static int dpcm_fe_dai_open(struct snd_pcm_substream *fe_substream)
 
 	ret = dpcm_path_get(fe, stream, &list);
 	if (ret < 0) {
-		mutex_unlock(&fe->card->mutex);
-		return ret;
+		goto open_end;
 	} else if (ret == 0) {
 		dev_dbg(fe->dev, "ASoC: %s no valid %s route\n",
 			fe->dai_link->name, stream ? "capture" : "playback");
@@ -2837,37 +2889,12 @@ static int dpcm_fe_dai_open(struct snd_pcm_substream *fe_substream)
 	dpcm_process_paths(fe, stream, &list, 1);
 
 	ret = dpcm_fe_dai_startup(fe_substream);
-	if (ret < 0) {
-		/* clean up all links */
-		for_each_dpcm_be(fe, stream, dpcm)
-			dpcm->state = SND_SOC_DPCM_LINK_STATE_FREE;
-
-		dpcm_be_disconnect(fe, stream);
-		fe->dpcm[stream].runtime = NULL;
-	}
+	if (ret < 0)
+		dpcm_fe_dai_cleanup(fe_substream);
 
 	dpcm_clear_pending_state(fe, stream);
 	dpcm_path_put(&list);
-	mutex_unlock(&fe->card->mutex);
-	return ret;
-}
-
-static int dpcm_fe_dai_close(struct snd_pcm_substream *fe_substream)
-{
-	struct snd_soc_pcm_runtime *fe = fe_substream->private_data;
-	struct snd_soc_dpcm *dpcm;
-	int stream = fe_substream->stream, ret;
-
-	mutex_lock_nested(&fe->card->mutex, SND_SOC_CARD_CLASS_RUNTIME);
-	ret = dpcm_fe_dai_shutdown(fe_substream);
-
-	/* mark FE's links ready to prune */
-	for_each_dpcm_be(fe, stream, dpcm)
-		dpcm->state = SND_SOC_DPCM_LINK_STATE_FREE;
-
-	dpcm_be_disconnect(fe, stream);
-
-	fe->dpcm[stream].runtime = NULL;
+open_end:
 	mutex_unlock(&fe->card->mutex);
 	return ret;
 }
@@ -2876,7 +2903,7 @@ static int dpcm_fe_dai_close(struct snd_pcm_substream *fe_substream)
 int soc_new_pcm(struct snd_soc_pcm_runtime *rtd, int num)
 {
 	struct snd_soc_dai *codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *cpu_dai;
 	struct snd_soc_component *component;
 	struct snd_pcm *pcm;
 	char new_name[64];
@@ -2888,22 +2915,29 @@ int soc_new_pcm(struct snd_soc_pcm_runtime *rtd, int num)
 		capture = rtd->dai_link->dpcm_capture;
 	} else {
 		/* Adapt stream for codec2codec links */
-		struct snd_soc_pcm_stream *cpu_capture = rtd->dai_link->params ?
-			&cpu_dai->driver->playback : &cpu_dai->driver->capture;
-		struct snd_soc_pcm_stream *cpu_playback = rtd->dai_link->params ?
-			&cpu_dai->driver->capture : &cpu_dai->driver->playback;
+		int cpu_capture = rtd->dai_link->params ?
+			SNDRV_PCM_STREAM_PLAYBACK : SNDRV_PCM_STREAM_CAPTURE;
+		int cpu_playback = rtd->dai_link->params ?
+			SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
 
-		for_each_rtd_codec_dai(rtd, i, codec_dai) {
+		for_each_rtd_codec_dais(rtd, i, codec_dai) {
+			if (rtd->num_cpus == 1) {
+				cpu_dai = rtd->cpu_dais[0];
+			} else if (rtd->num_cpus == rtd->num_codecs) {
+				cpu_dai = rtd->cpu_dais[i];
+			} else {
+				dev_err(rtd->card->dev,
+					"N cpus to M codecs link is not supported yet\n");
+				return -EINVAL;
+			}
+
 			if (snd_soc_dai_stream_valid(codec_dai, SNDRV_PCM_STREAM_PLAYBACK) &&
-			    snd_soc_dai_stream_valid(cpu_dai,   SNDRV_PCM_STREAM_CAPTURE))
+			    snd_soc_dai_stream_valid(cpu_dai,   cpu_playback))
 				playback = 1;
 			if (snd_soc_dai_stream_valid(codec_dai, SNDRV_PCM_STREAM_CAPTURE) &&
-			    snd_soc_dai_stream_valid(cpu_dai,   SNDRV_PCM_STREAM_PLAYBACK))
+			    snd_soc_dai_stream_valid(cpu_dai,   cpu_capture))
 				capture = 1;
 		}
-
-		capture = capture && cpu_capture->channels_min;
-		playback = playback && cpu_playback->channels_min;
 	}
 
 	if (rtd->dai_link->playback_only) {
@@ -3017,7 +3051,7 @@ int soc_new_pcm(struct snd_soc_pcm_runtime *rtd, int num)
 out:
 	dev_info(rtd->card->dev, "%s <-> %s mapping ok\n",
 		 (rtd->num_codecs > 1) ? "multicodec" : rtd->codec_dai->name,
-		 cpu_dai->name);
+		 (rtd->num_cpus > 1) ? "multicpu" : rtd->cpu_dai->name);
 	return ret;
 }
 
@@ -3050,33 +3084,17 @@ struct snd_pcm_substream *
 }
 EXPORT_SYMBOL_GPL(snd_soc_dpcm_get_substream);
 
-/* get the BE runtime state */
-enum snd_soc_dpcm_state
-	snd_soc_dpcm_be_get_state(struct snd_soc_pcm_runtime *be, int stream)
-{
-	return be->dpcm[stream].state;
-}
-EXPORT_SYMBOL_GPL(snd_soc_dpcm_be_get_state);
-
-/* set the BE runtime state */
-void snd_soc_dpcm_be_set_state(struct snd_soc_pcm_runtime *be,
-		int stream, enum snd_soc_dpcm_state state)
-{
-	be->dpcm[stream].state = state;
-}
-EXPORT_SYMBOL_GPL(snd_soc_dpcm_be_set_state);
-
-/*
- * We can only hw_free, stop, pause or suspend a BE DAI if any of it's FE
- * are not running, paused or suspended for the specified stream direction.
- */
-int snd_soc_dpcm_can_be_free_stop(struct snd_soc_pcm_runtime *fe,
-		struct snd_soc_pcm_runtime *be, int stream)
+static int snd_soc_dpcm_check_state(struct snd_soc_pcm_runtime *fe,
+				    struct snd_soc_pcm_runtime *be,
+				    int stream,
+				    const enum snd_soc_dpcm_state *states,
+				    int num_states)
 {
 	struct snd_soc_dpcm *dpcm;
 	int state;
 	int ret = 1;
 	unsigned long flags;
+	int i;
 
 	spin_lock_irqsave(&fe->card->dpcm_lock, flags);
 	for_each_dpcm_fe(be, stream, dpcm) {
@@ -3085,18 +3103,34 @@ int snd_soc_dpcm_can_be_free_stop(struct snd_soc_pcm_runtime *fe,
 			continue;
 
 		state = dpcm->fe->dpcm[stream].state;
-		if (state == SND_SOC_DPCM_STATE_START ||
-			state == SND_SOC_DPCM_STATE_PAUSED ||
-			state == SND_SOC_DPCM_STATE_SUSPEND) {
-			ret = 0;
-			break;
+		for (i = 0; i < num_states; i++) {
+			if (state == states[i]) {
+				ret = 0;
+				break;
+			}
 		}
 	}
 	spin_unlock_irqrestore(&fe->card->dpcm_lock, flags);
 
-	/* it's safe to free/stop this BE DAI */
+	/* it's safe to do this BE DAI */
 	return ret;
 }
+
+/*
+ * We can only hw_free, stop, pause or suspend a BE DAI if any of it's FE
+ * are not running, paused or suspended for the specified stream direction.
+ */
+int snd_soc_dpcm_can_be_free_stop(struct snd_soc_pcm_runtime *fe,
+		struct snd_soc_pcm_runtime *be, int stream)
+{
+	const enum snd_soc_dpcm_state state[] = {
+		SND_SOC_DPCM_STATE_START,
+		SND_SOC_DPCM_STATE_PAUSED,
+		SND_SOC_DPCM_STATE_SUSPEND,
+	};
+
+	return snd_soc_dpcm_check_state(fe, be, stream, state, ARRAY_SIZE(state));
+}
 EXPORT_SYMBOL_GPL(snd_soc_dpcm_can_be_free_stop);
 
 /*
@@ -3106,168 +3140,13 @@ EXPORT_SYMBOL_GPL(snd_soc_dpcm_can_be_free_stop);
 int snd_soc_dpcm_can_be_params(struct snd_soc_pcm_runtime *fe,
 		struct snd_soc_pcm_runtime *be, int stream)
 {
-	struct snd_soc_dpcm *dpcm;
-	int state;
-	int ret = 1;
-	unsigned long flags;
+	const enum snd_soc_dpcm_state state[] = {
+		SND_SOC_DPCM_STATE_START,
+		SND_SOC_DPCM_STATE_PAUSED,
+		SND_SOC_DPCM_STATE_SUSPEND,
+		SND_SOC_DPCM_STATE_PREPARE,
+	};
 
-	spin_lock_irqsave(&fe->card->dpcm_lock, flags);
-	for_each_dpcm_fe(be, stream, dpcm) {
-
-		if (dpcm->fe == fe)
-			continue;
-
-		state = dpcm->fe->dpcm[stream].state;
-		if (state == SND_SOC_DPCM_STATE_START ||
-			state == SND_SOC_DPCM_STATE_PAUSED ||
-			state == SND_SOC_DPCM_STATE_SUSPEND ||
-			state == SND_SOC_DPCM_STATE_PREPARE) {
-			ret = 0;
-			break;
-		}
-	}
-	spin_unlock_irqrestore(&fe->card->dpcm_lock, flags);
-
-	/* it's safe to change hw_params */
-	return ret;
+	return snd_soc_dpcm_check_state(fe, be, stream, state, ARRAY_SIZE(state));
 }
 EXPORT_SYMBOL_GPL(snd_soc_dpcm_can_be_params);
-
-#ifdef CONFIG_DEBUG_FS
-static const char *dpcm_state_string(enum snd_soc_dpcm_state state)
-{
-	switch (state) {
-	case SND_SOC_DPCM_STATE_NEW:
-		return "new";
-	case SND_SOC_DPCM_STATE_OPEN:
-		return "open";
-	case SND_SOC_DPCM_STATE_HW_PARAMS:
-		return "hw_params";
-	case SND_SOC_DPCM_STATE_PREPARE:
-		return "prepare";
-	case SND_SOC_DPCM_STATE_START:
-		return "start";
-	case SND_SOC_DPCM_STATE_STOP:
-		return "stop";
-	case SND_SOC_DPCM_STATE_SUSPEND:
-		return "suspend";
-	case SND_SOC_DPCM_STATE_PAUSED:
-		return "paused";
-	case SND_SOC_DPCM_STATE_HW_FREE:
-		return "hw_free";
-	case SND_SOC_DPCM_STATE_CLOSE:
-		return "close";
-	}
-
-	return "unknown";
-}
-
-static ssize_t dpcm_show_state(struct snd_soc_pcm_runtime *fe,
-				int stream, char *buf, size_t size)
-{
-	struct snd_pcm_hw_params *params = &fe->dpcm[stream].hw_params;
-	struct snd_soc_dpcm *dpcm;
-	ssize_t offset = 0;
-	unsigned long flags;
-
-	/* FE state */
-	offset += scnprintf(buf + offset, size - offset,
-			"[%s - %s]\n", fe->dai_link->name,
-			stream ? "Capture" : "Playback");
-
-	offset += scnprintf(buf + offset, size - offset, "State: %s\n",
-	                dpcm_state_string(fe->dpcm[stream].state));
-
-	if ((fe->dpcm[stream].state >= SND_SOC_DPCM_STATE_HW_PARAMS) &&
-	    (fe->dpcm[stream].state <= SND_SOC_DPCM_STATE_STOP))
-		offset += scnprintf(buf + offset, size - offset,
-				"Hardware Params: "
-				"Format = %s, Channels = %d, Rate = %d\n",
-				snd_pcm_format_name(params_format(params)),
-				params_channels(params),
-				params_rate(params));
-
-	/* BEs state */
-	offset += scnprintf(buf + offset, size - offset, "Backends:\n");
-
-	if (list_empty(&fe->dpcm[stream].be_clients)) {
-		offset += scnprintf(buf + offset, size - offset,
-				" No active DSP links\n");
-		goto out;
-	}
-
-	spin_lock_irqsave(&fe->card->dpcm_lock, flags);
-	for_each_dpcm_be(fe, stream, dpcm) {
-		struct snd_soc_pcm_runtime *be = dpcm->be;
-		params = &dpcm->hw_params;
-
-		offset += scnprintf(buf + offset, size - offset,
-				"- %s\n", be->dai_link->name);
-
-		offset += scnprintf(buf + offset, size - offset,
-				"   State: %s\n",
-				dpcm_state_string(be->dpcm[stream].state));
-
-		if ((be->dpcm[stream].state >= SND_SOC_DPCM_STATE_HW_PARAMS) &&
-		    (be->dpcm[stream].state <= SND_SOC_DPCM_STATE_STOP))
-			offset += scnprintf(buf + offset, size - offset,
-				"   Hardware Params: "
-				"Format = %s, Channels = %d, Rate = %d\n",
-				snd_pcm_format_name(params_format(params)),
-				params_channels(params),
-				params_rate(params));
-	}
-	spin_unlock_irqrestore(&fe->card->dpcm_lock, flags);
-out:
-	return offset;
-}
-
-static ssize_t dpcm_state_read_file(struct file *file, char __user *user_buf,
-				size_t count, loff_t *ppos)
-{
-	struct snd_soc_pcm_runtime *fe = file->private_data;
-	ssize_t out_count = PAGE_SIZE, offset = 0, ret = 0;
-	char *buf;
-
-	buf = kmalloc(out_count, GFP_KERNEL);
-	if (!buf)
-		return -ENOMEM;
-
-	if (snd_soc_dai_stream_valid(fe->cpu_dai, SNDRV_PCM_STREAM_PLAYBACK))
-		offset += dpcm_show_state(fe, SNDRV_PCM_STREAM_PLAYBACK,
-					buf + offset, out_count - offset);
-
-	if (snd_soc_dai_stream_valid(fe->cpu_dai, SNDRV_PCM_STREAM_CAPTURE))
-		offset += dpcm_show_state(fe, SNDRV_PCM_STREAM_CAPTURE,
-					buf + offset, out_count - offset);
-
-	ret = simple_read_from_buffer(user_buf, count, ppos, buf, offset);
-
-	kfree(buf);
-	return ret;
-}
-
-static const struct file_operations dpcm_state_fops = {
-	.open = simple_open,
-	.read = dpcm_state_read_file,
-	.llseek = default_llseek,
-};
-
-void soc_dpcm_debugfs_add(struct snd_soc_pcm_runtime *rtd)
-{
-	if (!rtd->dai_link)
-		return;
-
-	if (!rtd->dai_link->dynamic)
-		return;
-
-	if (!rtd->card->debugfs_card_root)
-		return;
-
-	rtd->debugfs_dpcm_root = debugfs_create_dir(rtd->dai_link->name,
-			rtd->card->debugfs_card_root);
-
-	debugfs_create_file("state", 0444, rtd->debugfs_dpcm_root,
-			    rtd, &dpcm_state_fops);
-}
-#endif
diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c
index 575da6a..87f75ed 100644
--- a/sound/soc/soc-topology.c
+++ b/sound/soc/soc-topology.c
@@ -251,7 +251,7 @@ static int soc_tplg_vendor_load_(struct soc_tplg *tplg,
 {
 	int ret = 0;
 
-	if (tplg->comp && tplg->ops && tplg->ops->vendor_load)
+	if (tplg->ops && tplg->ops->vendor_load)
 		ret = tplg->ops->vendor_load(tplg->comp, tplg->index, hdr);
 	else {
 		dev_err(tplg->dev, "ASoC: no vendor load callback for ID %d\n",
@@ -283,7 +283,7 @@ static int soc_tplg_vendor_load(struct soc_tplg *tplg,
 static int soc_tplg_widget_load(struct soc_tplg *tplg,
 	struct snd_soc_dapm_widget *w, struct snd_soc_tplg_dapm_widget *tplg_w)
 {
-	if (tplg->comp && tplg->ops && tplg->ops->widget_load)
+	if (tplg->ops && tplg->ops->widget_load)
 		return tplg->ops->widget_load(tplg->comp, tplg->index, w,
 			tplg_w);
 
@@ -295,7 +295,7 @@ static int soc_tplg_widget_load(struct soc_tplg *tplg,
 static int soc_tplg_widget_ready(struct soc_tplg *tplg,
 	struct snd_soc_dapm_widget *w, struct snd_soc_tplg_dapm_widget *tplg_w)
 {
-	if (tplg->comp && tplg->ops && tplg->ops->widget_ready)
+	if (tplg->ops && tplg->ops->widget_ready)
 		return tplg->ops->widget_ready(tplg->comp, tplg->index, w,
 			tplg_w);
 
@@ -307,7 +307,7 @@ static int soc_tplg_dai_load(struct soc_tplg *tplg,
 	struct snd_soc_dai_driver *dai_drv,
 	struct snd_soc_tplg_pcm *pcm, struct snd_soc_dai *dai)
 {
-	if (tplg->comp && tplg->ops && tplg->ops->dai_load)
+	if (tplg->ops && tplg->ops->dai_load)
 		return tplg->ops->dai_load(tplg->comp, tplg->index, dai_drv,
 			pcm, dai);
 
@@ -318,7 +318,7 @@ static int soc_tplg_dai_load(struct soc_tplg *tplg,
 static int soc_tplg_dai_link_load(struct soc_tplg *tplg,
 	struct snd_soc_dai_link *link, struct snd_soc_tplg_link_config *cfg)
 {
-	if (tplg->comp && tplg->ops && tplg->ops->link_load)
+	if (tplg->ops && tplg->ops->link_load)
 		return tplg->ops->link_load(tplg->comp, tplg->index, link, cfg);
 
 	return 0;
@@ -327,7 +327,7 @@ static int soc_tplg_dai_link_load(struct soc_tplg *tplg,
 /* tell the component driver that all firmware has been loaded in this request */
 static void soc_tplg_complete(struct soc_tplg *tplg)
 {
-	if (tplg->comp && tplg->ops && tplg->ops->complete)
+	if (tplg->ops && tplg->ops->complete)
 		tplg->ops->complete(tplg->comp);
 }
 
@@ -362,7 +362,7 @@ static int soc_tplg_add_kcontrol(struct soc_tplg *tplg,
 	struct snd_soc_component *comp = tplg->comp;
 
 	return soc_tplg_add_dcontrol(comp->card->snd_card,
-				comp->dev, k, NULL, comp, kcontrol);
+				comp->dev, k, comp->name_prefix, comp, kcontrol);
 }
 
 /* remove a mixer kcontrol */
@@ -684,7 +684,7 @@ EXPORT_SYMBOL_GPL(snd_soc_tplg_widget_bind_event);
 static int soc_tplg_init_kcontrol(struct soc_tplg *tplg,
 	struct snd_kcontrol_new *k, struct snd_soc_tplg_ctl_hdr *hdr)
 {
-	if (tplg->comp && tplg->ops && tplg->ops->control_load)
+	if (tplg->ops && tplg->ops->control_load)
 		return tplg->ops->control_load(tplg->comp, tplg->index, k,
 			hdr);
 
@@ -1174,7 +1174,7 @@ static int soc_tplg_kcontrol_elems_load(struct soc_tplg *tplg,
 static int soc_tplg_add_route(struct soc_tplg *tplg,
 	struct snd_soc_dapm_route *route)
 {
-	if (tplg->comp && tplg->ops && tplg->ops->dapm_route_load)
+	if (tplg->ops && tplg->ops->dapm_route_load)
 		return tplg->ops->dapm_route_load(tplg->comp, tplg->index,
 			route);
 
@@ -2564,7 +2564,7 @@ static int soc_tplg_manifest_load(struct soc_tplg *tplg,
 	}
 
 	/* pass control to component driver for optional further init */
-	if (tplg->comp && tplg->ops && tplg->ops->manifest)
+	if (tplg->ops && tplg->ops->manifest)
 		ret = tplg->ops->manifest(tplg->comp, tplg->index, _manifest);
 
 	if (!abi_match)	/* free the duplicated one */
@@ -2736,6 +2736,10 @@ int snd_soc_tplg_component_load(struct snd_soc_component *comp,
 	struct soc_tplg tplg;
 	int ret;
 
+	/* component needs to exist to keep and reference data while parsing */
+	if (!comp)
+		return -EINVAL;
+
 	/* setup parsing context */
 	memset(&tplg, 0, sizeof(tplg));
 	tplg.fw = fw;
@@ -2774,7 +2778,7 @@ void snd_soc_tplg_widget_remove_all(struct snd_soc_dapm_context *dapm,
 {
 	struct snd_soc_dapm_widget *w, *next_w;
 
-	list_for_each_entry_safe(w, next_w, &dapm->card->widgets, list) {
+	for_each_card_widgets_safe(dapm->card, w, next_w) {
 
 		/* make sure we are a widget with correct context */
 		if (w->dobj.type != SND_SOC_DOBJ_WIDGET || w->dapm != dapm)
diff --git a/sound/soc/sof/Kconfig b/sound/soc/sof/Kconfig
index 827b0ec9..4dda4b6 100644
--- a/sound/soc/sof/Kconfig
+++ b/sound/soc/sof/Kconfig
@@ -41,6 +41,15 @@
 	  required to enable i.MX8 devices.
 	  Say Y if you need this option. If unsure select "N".
 
+config SND_SOC_SOF_DEBUG_PROBES
+	bool "SOF enable data probing"
+	select SND_SOC_COMPRESS
+	help
+	  This option enables the data probing feature that can be used to
+	  gather data directly from specific points of the audio pipeline.
+	  Say Y if you want to enable probes.
+	  If unsure, select "N".
+
 config SND_SOC_SOF_DEVELOPER_SUPPORT
 	bool "SOF developer options support"
 	depends on EXPERT
diff --git a/sound/soc/sof/Makefile b/sound/soc/sof/Makefile
index 0a8bc72..8eca2f8 100644
--- a/sound/soc/sof/Makefile
+++ b/sound/soc/sof/Makefile
@@ -2,6 +2,7 @@
 
 snd-sof-objs := core.o ops.o loader.o ipc.o pcm.o pm.o debug.o topology.o\
 		control.o trace.o utils.o sof-audio.o
+snd-sof-$(CONFIG_SND_SOC_SOF_DEBUG_PROBES) += probe.o compress.o
 
 snd-sof-pci-objs := sof-pci-dev.o
 snd-sof-acpi-objs := sof-acpi-dev.o
diff --git a/sound/soc/sof/compress.c b/sound/soc/sof/compress.c
new file mode 100644
index 0000000..7354dc6
--- /dev/null
+++ b/sound/soc/sof/compress.c
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+//
+// This file is provided under a dual BSD/GPLv2 license.  When using or
+// redistributing this file, you may do so under either license.
+//
+// Copyright(c) 2019-2020 Intel Corporation. All rights reserved.
+//
+// Author: Cezary Rojewski <cezary.rojewski@intel.com>
+//
+
+#include <sound/soc.h>
+#include "compress.h"
+#include "ops.h"
+#include "probe.h"
+
+struct snd_compr_ops sof_probe_compressed_ops = {
+	.copy		= sof_probe_compr_copy,
+};
+EXPORT_SYMBOL(sof_probe_compressed_ops);
+
+int sof_probe_compr_open(struct snd_compr_stream *cstream,
+		struct snd_soc_dai *dai)
+{
+	struct snd_sof_dev *sdev =
+				snd_soc_component_get_drvdata(dai->component);
+	int ret;
+
+	ret = snd_sof_probe_compr_assign(sdev, cstream, dai);
+	if (ret < 0) {
+		dev_err(dai->dev, "Failed to assign probe stream: %d\n", ret);
+		return ret;
+	}
+
+	sdev->extractor_stream_tag = ret;
+	return 0;
+}
+EXPORT_SYMBOL(sof_probe_compr_open);
+
+int sof_probe_compr_free(struct snd_compr_stream *cstream,
+		struct snd_soc_dai *dai)
+{
+	struct snd_sof_dev *sdev =
+				snd_soc_component_get_drvdata(dai->component);
+	struct sof_probe_point_desc *desc;
+	size_t num_desc;
+	int i, ret;
+
+	/* disconnect all probe points */
+	ret = sof_ipc_probe_points_info(sdev, &desc, &num_desc);
+	if (ret < 0) {
+		dev_err(dai->dev, "Failed to get probe points: %d\n", ret);
+		goto exit;
+	}
+
+	for (i = 0; i < num_desc; i++)
+		sof_ipc_probe_points_remove(sdev, &desc[i].buffer_id, 1);
+	kfree(desc);
+
+exit:
+	ret = sof_ipc_probe_deinit(sdev);
+	if (ret < 0)
+		dev_err(dai->dev, "Failed to deinit probe: %d\n", ret);
+
+	sdev->extractor_stream_tag = SOF_PROBE_INVALID_NODE_ID;
+	snd_compr_free_pages(cstream);
+
+	return snd_sof_probe_compr_free(sdev, cstream, dai);
+}
+EXPORT_SYMBOL(sof_probe_compr_free);
+
+int sof_probe_compr_set_params(struct snd_compr_stream *cstream,
+		struct snd_compr_params *params, struct snd_soc_dai *dai)
+{
+	struct snd_compr_runtime *rtd = cstream->runtime;
+	struct snd_sof_dev *sdev =
+				snd_soc_component_get_drvdata(dai->component);
+	int ret;
+
+	cstream->dma_buffer.dev.type = SNDRV_DMA_TYPE_DEV_SG;
+	cstream->dma_buffer.dev.dev = sdev->dev;
+	ret = snd_compr_malloc_pages(cstream, rtd->buffer_size);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_sof_probe_compr_set_params(sdev, cstream, params, dai);
+	if (ret < 0)
+		return ret;
+
+	ret = sof_ipc_probe_init(sdev, sdev->extractor_stream_tag,
+				 rtd->dma_bytes);
+	if (ret < 0) {
+		dev_err(dai->dev, "Failed to init probe: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(sof_probe_compr_set_params);
+
+int sof_probe_compr_trigger(struct snd_compr_stream *cstream, int cmd,
+		struct snd_soc_dai *dai)
+{
+	struct snd_sof_dev *sdev =
+				snd_soc_component_get_drvdata(dai->component);
+
+	return snd_sof_probe_compr_trigger(sdev, cstream, cmd, dai);
+}
+EXPORT_SYMBOL(sof_probe_compr_trigger);
+
+int sof_probe_compr_pointer(struct snd_compr_stream *cstream,
+		struct snd_compr_tstamp *tstamp, struct snd_soc_dai *dai)
+{
+	struct snd_sof_dev *sdev =
+				snd_soc_component_get_drvdata(dai->component);
+
+	return snd_sof_probe_compr_pointer(sdev, cstream, tstamp, dai);
+}
+EXPORT_SYMBOL(sof_probe_compr_pointer);
+
+int sof_probe_compr_copy(struct snd_compr_stream *cstream,
+		char __user *buf, size_t count)
+{
+	struct snd_compr_runtime *rtd = cstream->runtime;
+	unsigned int offset, n;
+	void *ptr;
+	int ret;
+
+	if (count > rtd->buffer_size)
+		count = rtd->buffer_size;
+
+	div_u64_rem(rtd->total_bytes_transferred, rtd->buffer_size, &offset);
+	ptr = rtd->dma_area + offset;
+	n = rtd->buffer_size - offset;
+
+	if (count < n) {
+		ret = copy_to_user(buf, ptr, count);
+	} else {
+		ret = copy_to_user(buf, ptr, n);
+		ret += copy_to_user(buf + n, rtd->dma_area, count - n);
+	}
+
+	if (ret)
+		return count - ret;
+	return count;
+}
+EXPORT_SYMBOL(sof_probe_compr_copy);
diff --git a/sound/soc/sof/compress.h b/sound/soc/sof/compress.h
new file mode 100644
index 0000000..800f163
--- /dev/null
+++ b/sound/soc/sof/compress.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) */
+/*
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * Copyright(c) 2019-2020 Intel Corporation. All rights reserved.
+ *
+ * Author: Cezary Rojewski <cezary.rojewski@intel.com>
+ */
+
+#ifndef __SOF_COMPRESS_H
+#define __SOF_COMPRESS_H
+
+#include <sound/compress_driver.h>
+
+extern struct snd_compr_ops sof_probe_compressed_ops;
+
+int sof_probe_compr_open(struct snd_compr_stream *cstream,
+		struct snd_soc_dai *dai);
+int sof_probe_compr_free(struct snd_compr_stream *cstream,
+		struct snd_soc_dai *dai);
+int sof_probe_compr_set_params(struct snd_compr_stream *cstream,
+		struct snd_compr_params *params, struct snd_soc_dai *dai);
+int sof_probe_compr_trigger(struct snd_compr_stream *cstream, int cmd,
+		struct snd_soc_dai *dai);
+int sof_probe_compr_pointer(struct snd_compr_stream *cstream,
+		struct snd_compr_tstamp *tstamp, struct snd_soc_dai *dai);
+int sof_probe_compr_copy(struct snd_compr_stream *cstream,
+		char __user *buf, size_t count);
+
+#endif
diff --git a/sound/soc/sof/core.c b/sound/soc/sof/core.c
index 34cefba..91acfae 100644
--- a/sound/soc/sof/core.c
+++ b/sound/soc/sof/core.c
@@ -14,6 +14,9 @@
 #include <sound/sof.h>
 #include "sof-priv.h"
 #include "ops.h"
+#if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_PROBES)
+#include "probe.h"
+#endif
 
 /* see SOF_DBG_ flags */
 int sof_core_debug;
@@ -286,12 +289,15 @@ int snd_sof_device_probe(struct device *dev, struct snd_sof_pdata *plat_data)
 	/* initialize sof device */
 	sdev->dev = dev;
 
-	/* initialize default D0 sub-state */
-	sdev->d0_substate = SOF_DSP_D0I0;
+	/* initialize default DSP power state */
+	sdev->dsp_power_state.state = SOF_DSP_PM_D0;
 
 	sdev->pdata = plat_data;
 	sdev->first_boot = true;
 	sdev->fw_state = SOF_FW_BOOT_NOT_STARTED;
+#if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_PROBES)
+	sdev->extractor_stream_tag = SOF_PROBE_INVALID_NODE_ID;
+#endif
 	dev_set_drvdata(dev, sdev);
 
 	/* check all mandatory ops */
diff --git a/sound/soc/sof/debug.c b/sound/soc/sof/debug.c
index d2b3b99..b5c0d6cf 100644
--- a/sound/soc/sof/debug.c
+++ b/sound/soc/sof/debug.c
@@ -17,6 +17,221 @@
 #include "sof-priv.h"
 #include "ops.h"
 
+#if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_PROBES)
+#include "probe.h"
+
+/**
+ * strsplit_u32 - Split string into sequence of u32 tokens
+ * @buf:	String to split into tokens.
+ * @delim:	String containing delimiter characters.
+ * @tkns:	Returned u32 sequence pointer.
+ * @num_tkns:	Returned number of tokens obtained.
+ */
+static int
+strsplit_u32(char **buf, const char *delim, u32 **tkns, size_t *num_tkns)
+{
+	char *s;
+	u32 *data, *tmp;
+	size_t count = 0;
+	size_t cap = 32;
+	int ret = 0;
+
+	*tkns = NULL;
+	*num_tkns = 0;
+	data = kcalloc(cap, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	while ((s = strsep(buf, delim)) != NULL) {
+		ret = kstrtouint(s, 0, data + count);
+		if (ret)
+			goto exit;
+		if (++count >= cap) {
+			cap *= 2;
+			tmp = krealloc(data, cap * sizeof(*data), GFP_KERNEL);
+			if (!tmp) {
+				ret = -ENOMEM;
+				goto exit;
+			}
+			data = tmp;
+		}
+	}
+
+	if (!count)
+		goto exit;
+	*tkns = kmemdup(data, count * sizeof(*data), GFP_KERNEL);
+	if (*tkns == NULL) {
+		ret = -ENOMEM;
+		goto exit;
+	}
+	*num_tkns = count;
+
+exit:
+	kfree(data);
+	return ret;
+}
+
+static int tokenize_input(const char __user *from, size_t count,
+		loff_t *ppos, u32 **tkns, size_t *num_tkns)
+{
+	char *buf;
+	int ret;
+
+	buf = kmalloc(count + 1, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	ret = simple_write_to_buffer(buf, count, ppos, from, count);
+	if (ret != count) {
+		ret = ret >= 0 ? -EIO : ret;
+		goto exit;
+	}
+
+	buf[count] = '\0';
+	ret = strsplit_u32((char **)&buf, ",", tkns, num_tkns);
+exit:
+	kfree(buf);
+	return ret;
+}
+
+static ssize_t probe_points_read(struct file *file,
+		char __user *to, size_t count, loff_t *ppos)
+{
+	struct snd_sof_dfsentry *dfse = file->private_data;
+	struct snd_sof_dev *sdev = dfse->sdev;
+	struct sof_probe_point_desc *desc;
+	size_t num_desc, len = 0;
+	char *buf;
+	int i, ret;
+
+	if (sdev->extractor_stream_tag == SOF_PROBE_INVALID_NODE_ID) {
+		dev_warn(sdev->dev, "no extractor stream running\n");
+		return -ENOENT;
+	}
+
+	buf = kzalloc(PAGE_SIZE, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	ret = sof_ipc_probe_points_info(sdev, &desc, &num_desc);
+	if (ret < 0)
+		goto exit;
+
+	for (i = 0; i < num_desc; i++) {
+		ret = snprintf(buf + len, PAGE_SIZE - len,
+			"Id: %#010x  Purpose: %d  Node id: %#x\n",
+			desc[i].buffer_id, desc[i].purpose, desc[i].stream_tag);
+		if (ret < 0)
+			goto free_desc;
+		len += ret;
+	}
+
+	ret = simple_read_from_buffer(to, count, ppos, buf, len);
+free_desc:
+	kfree(desc);
+exit:
+	kfree(buf);
+	return ret;
+}
+
+static ssize_t probe_points_write(struct file *file,
+		const char __user *from, size_t count, loff_t *ppos)
+{
+	struct snd_sof_dfsentry *dfse = file->private_data;
+	struct snd_sof_dev *sdev = dfse->sdev;
+	struct sof_probe_point_desc *desc;
+	size_t num_tkns, bytes;
+	u32 *tkns;
+	int ret;
+
+	if (sdev->extractor_stream_tag == SOF_PROBE_INVALID_NODE_ID) {
+		dev_warn(sdev->dev, "no extractor stream running\n");
+		return -ENOENT;
+	}
+
+	ret = tokenize_input(from, count, ppos, &tkns, &num_tkns);
+	if (ret < 0)
+		return ret;
+	bytes = sizeof(*tkns) * num_tkns;
+	if (!num_tkns || (bytes % sizeof(*desc))) {
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	desc = (struct sof_probe_point_desc *)tkns;
+	ret = sof_ipc_probe_points_add(sdev,
+			desc, bytes / sizeof(*desc));
+	if (!ret)
+		ret = count;
+exit:
+	kfree(tkns);
+	return ret;
+}
+
+static const struct file_operations probe_points_fops = {
+	.open = simple_open,
+	.read = probe_points_read,
+	.write = probe_points_write,
+	.llseek = default_llseek,
+};
+
+static ssize_t probe_points_remove_write(struct file *file,
+		const char __user *from, size_t count, loff_t *ppos)
+{
+	struct snd_sof_dfsentry *dfse = file->private_data;
+	struct snd_sof_dev *sdev = dfse->sdev;
+	size_t num_tkns;
+	u32 *tkns;
+	int ret;
+
+	if (sdev->extractor_stream_tag == SOF_PROBE_INVALID_NODE_ID) {
+		dev_warn(sdev->dev, "no extractor stream running\n");
+		return -ENOENT;
+	}
+
+	ret = tokenize_input(from, count, ppos, &tkns, &num_tkns);
+	if (ret < 0)
+		return ret;
+	if (!num_tkns) {
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	ret = sof_ipc_probe_points_remove(sdev, tkns, num_tkns);
+	if (!ret)
+		ret = count;
+exit:
+	kfree(tkns);
+	return ret;
+}
+
+static const struct file_operations probe_points_remove_fops = {
+	.open = simple_open,
+	.write = probe_points_remove_write,
+	.llseek = default_llseek,
+};
+
+static int snd_sof_debugfs_probe_item(struct snd_sof_dev *sdev,
+				 const char *name, mode_t mode,
+				 const struct file_operations *fops)
+{
+	struct snd_sof_dfsentry *dfse;
+
+	dfse = devm_kzalloc(sdev->dev, sizeof(*dfse), GFP_KERNEL);
+	if (!dfse)
+		return -ENOMEM;
+
+	dfse->type = SOF_DFSENTRY_TYPE_BUF;
+	dfse->sdev = sdev;
+
+	debugfs_create_file(name, mode, sdev->debugfs_root, dfse, fops);
+	/* add to dfsentry list */
+	list_add(&dfse->list, &sdev->dfsentry_list);
+
+	return 0;
+}
+#endif
+
 #if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_IPC_FLOOD_TEST)
 #define MAX_IPC_FLOOD_DURATION_MS 1000
 #define MAX_IPC_FLOOD_COUNT 10000
@@ -436,6 +651,17 @@ int snd_sof_dbg_init(struct snd_sof_dev *sdev)
 			return err;
 	}
 
+#if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_PROBES)
+	err = snd_sof_debugfs_probe_item(sdev, "probe_points",
+			0644, &probe_points_fops);
+	if (err < 0)
+		return err;
+	err = snd_sof_debugfs_probe_item(sdev, "probe_points_remove",
+			0200, &probe_points_remove_fops);
+	if (err < 0)
+		return err;
+#endif
+
 #if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_IPC_FLOOD_TEST)
 	/* create read-write ipc_flood_count debugfs entry */
 	err = snd_sof_debugfs_buf_item(sdev, NULL, 0,
diff --git a/sound/soc/sof/imx/imx8.c b/sound/soc/sof/imx/imx8.c
index b2556f5..b692752 100644
--- a/sound/soc/sof/imx/imx8.c
+++ b/sound/soc/sof/imx/imx8.c
@@ -138,7 +138,7 @@ static int imx8_send_msg(struct snd_sof_dev *sdev, struct snd_sof_ipc_msg *msg)
 /*
  * DSP control.
  */
-static int imx8_run(struct snd_sof_dev *sdev)
+static int imx8x_run(struct snd_sof_dev *sdev)
 {
 	struct imx8_priv *dsp_priv = (struct imx8_priv *)sdev->private;
 	int ret;
@@ -178,6 +178,24 @@ static int imx8_run(struct snd_sof_dev *sdev)
 	return 0;
 }
 
+static int imx8_run(struct snd_sof_dev *sdev)
+{
+	struct imx8_priv *dsp_priv = (struct imx8_priv *)sdev->private;
+	int ret;
+
+	ret = imx_sc_misc_set_control(dsp_priv->sc_ipc, IMX_SC_R_DSP,
+				      IMX_SC_C_OFS_SEL, 0);
+	if (ret < 0) {
+		dev_err(sdev->dev, "Error system address offset source select\n");
+		return ret;
+	}
+
+	imx_sc_pm_cpu_start(dsp_priv->sc_ipc, IMX_SC_R_DSP, true,
+			    RESET_VECTOR_VADDR);
+
+	return 0;
+}
+
 static int imx8_probe(struct snd_sof_dev *sdev)
 {
 	struct platform_device *pdev =
@@ -360,7 +378,7 @@ static struct snd_soc_dai_driver imx8_dai[] = {
 },
 };
 
-/* i.MX8  ops */
+/* i.MX8 ops */
 struct snd_sof_dsp_ops sof_imx8_ops = {
 	/* probe and remove */
 	.probe		= imx8_probe,
@@ -390,6 +408,39 @@ struct snd_sof_dsp_ops sof_imx8_ops = {
 	/* DAI drivers */
 	.drv = imx8_dai,
 	.num_drv = 1, /* we have only 1 ESAI interface on i.MX8 */
+};
+EXPORT_SYMBOL(sof_imx8_ops);
+
+/* i.MX8X ops */
+struct snd_sof_dsp_ops sof_imx8x_ops = {
+	/* probe and remove */
+	.probe		= imx8_probe,
+	.remove		= imx8_remove,
+	/* DSP core boot */
+	.run		= imx8x_run,
+
+	/* Block IO */
+	.block_read	= sof_block_read,
+	.block_write	= sof_block_write,
+
+	/* ipc */
+	.send_msg	= imx8_send_msg,
+	.fw_ready	= sof_fw_ready,
+	.get_mailbox_offset	= imx8_get_mailbox_offset,
+	.get_window_offset	= imx8_get_window_offset,
+
+	.ipc_msg_data	= imx8_ipc_msg_data,
+	.ipc_pcm_params	= imx8_ipc_pcm_params,
+
+	/* module loading */
+	.load_module	= snd_sof_parse_module_memcpy,
+	.get_bar_index	= imx8_get_bar_index,
+	/* firmware loading */
+	.load_firmware	= snd_sof_load_firmware_memcpy,
+
+	/* DAI drivers */
+	.drv = imx8_dai,
+	.num_drv = 1, /* we have only 1 ESAI interface on i.MX8 */
 
 	/* ALSA HW info flags */
 	.hw_info =	SNDRV_PCM_INFO_MMAP |
@@ -398,6 +449,6 @@ struct snd_sof_dsp_ops sof_imx8_ops = {
 			SNDRV_PCM_INFO_PAUSE |
 			SNDRV_PCM_INFO_NO_PERIOD_WAKEUP
 };
-EXPORT_SYMBOL(sof_imx8_ops);
+EXPORT_SYMBOL(sof_imx8x_ops);
 
 MODULE_LICENSE("Dual BSD/GPL");
diff --git a/sound/soc/sof/intel/Kconfig b/sound/soc/sof/intel/Kconfig
index 56a837d..c9a2bee 100644
--- a/sound/soc/sof/intel/Kconfig
+++ b/sound/soc/sof/intel/Kconfig
@@ -305,6 +305,15 @@
 	  Say Y if you want to enable HDAudio codecs with SOF.
 	  If unsure select "N".
 
+config SND_SOC_SOF_HDA_PROBES
+	bool "SOF enable probes over HDA"
+	depends on SND_SOC_SOF_DEBUG_PROBES
+	help
+	  This option enables the data probing for Intel(R).
+		  Intel(R) Skylake and newer platforms.
+	  Say Y if you want to enable probes.
+	  If unsure, select "N".
+
 config SND_SOC_SOF_HDA_ALWAYS_ENABLE_DMI_L1
 	bool "SOF enable DMI Link L1"
 	help
@@ -315,17 +324,6 @@
 	  Say Y if you want to enable DMI Link L1
 	  If unsure, select "N".
 
-config SND_SOC_SOF_HDA_COMMON_HDMI_CODEC
-	bool "SOF common HDA HDMI codec driver"
-	depends on SND_SOC_SOF_HDA_LINK
-	depends on SND_HDA_CODEC_HDMI
-	default SND_HDA_CODEC_HDMI
-	help
-	  This adds support for HDMI audio by using the common HDA
-	  HDMI/DisplayPort codec driver.
-	  Say Y if you want to use the common codec driver with SOF.
-	  If unsure select "Y".
-
 endif ## SND_SOC_SOF_HDA_COMMON
 
 config SND_SOC_SOF_HDA_LINK_BASELINE
diff --git a/sound/soc/sof/intel/Makefile b/sound/soc/sof/intel/Makefile
index b8f58e0..cee02a2 100644
--- a/sound/soc/sof/intel/Makefile
+++ b/sound/soc/sof/intel/Makefile
@@ -9,6 +9,7 @@
 				 hda-dsp.o hda-ipc.o hda-ctrl.o hda-pcm.o \
 				 hda-dai.o hda-bus.o \
 				 apl.o cnl.o
+snd-sof-intel-hda-common-$(CONFIG_SND_SOC_SOF_HDA_PROBES) += hda-compress.o
 
 snd-sof-intel-hda-objs := hda-codec.o
 
diff --git a/sound/soc/sof/intel/apl.c b/sound/soc/sof/intel/apl.c
index 2483b15..02218d2 100644
--- a/sound/soc/sof/intel/apl.c
+++ b/sound/soc/sof/intel/apl.c
@@ -73,6 +73,15 @@ const struct snd_sof_dsp_ops sof_apl_ops = {
 	.pcm_trigger	= hda_dsp_pcm_trigger,
 	.pcm_pointer	= hda_dsp_pcm_pointer,
 
+#if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA_PROBES)
+	/* probe callbacks */
+	.probe_assign	= hda_probe_compr_assign,
+	.probe_free	= hda_probe_compr_free,
+	.probe_set_params	= hda_probe_compr_set_params,
+	.probe_trigger	= hda_probe_compr_trigger,
+	.probe_pointer	= hda_probe_compr_pointer,
+#endif
+
 	/* firmware loading */
 	.load_firmware = snd_sof_load_firmware_raw,
 
diff --git a/sound/soc/sof/intel/cnl.c b/sound/soc/sof/intel/cnl.c
index 9e2d8af..e427d00 100644
--- a/sound/soc/sof/intel/cnl.c
+++ b/sound/soc/sof/intel/cnl.c
@@ -65,11 +65,6 @@ static irqreturn_t cnl_ipc_irq_thread(int irq, void *context)
 		hda_dsp_ipc_get_reply(sdev);
 		snd_sof_ipc_reply(sdev, msg);
 
-		if (sdev->code_loading)	{
-			sdev->code_loading = 0;
-			wake_up(&sdev->waitq);
-		}
-
 		cnl_ipc_dsp_done(sdev);
 
 		spin_unlock_irq(&sdev->ipc_lock);
@@ -171,23 +166,48 @@ static bool cnl_compact_ipc_compress(struct snd_sof_ipc_msg *msg,
 static int cnl_ipc_send_msg(struct snd_sof_dev *sdev,
 			    struct snd_sof_ipc_msg *msg)
 {
+	struct sof_intel_hda_dev *hdev = sdev->pdata->hw_pdata;
+	struct sof_ipc_cmd_hdr *hdr;
 	u32 dr = 0;
 	u32 dd = 0;
 
+	/*
+	 * Currently the only compact IPC supported is the PM_GATE
+	 * IPC which is used for transitioning the DSP between the
+	 * D0I0 and D0I3 states. And these are sent only during the
+	 * set_power_state() op. Therefore, there will never be a case
+	 * that a compact IPC results in the DSP exiting D0I3 without
+	 * the host and FW being in sync.
+	 */
 	if (cnl_compact_ipc_compress(msg, &dr, &dd)) {
 		/* send the message via IPC registers */
 		snd_sof_dsp_write(sdev, HDA_DSP_BAR, CNL_DSP_REG_HIPCIDD,
 				  dd);
 		snd_sof_dsp_write(sdev, HDA_DSP_BAR, CNL_DSP_REG_HIPCIDR,
 				  CNL_DSP_REG_HIPCIDR_BUSY | dr);
-	} else {
-		/* send the message via mailbox */
-		sof_mailbox_write(sdev, sdev->host_box.offset, msg->msg_data,
-				  msg->msg_size);
-		snd_sof_dsp_write(sdev, HDA_DSP_BAR, CNL_DSP_REG_HIPCIDR,
-				  CNL_DSP_REG_HIPCIDR_BUSY);
+		return 0;
 	}
 
+	/* send the message via mailbox */
+	sof_mailbox_write(sdev, sdev->host_box.offset, msg->msg_data,
+			  msg->msg_size);
+	snd_sof_dsp_write(sdev, HDA_DSP_BAR, CNL_DSP_REG_HIPCIDR,
+			  CNL_DSP_REG_HIPCIDR_BUSY);
+
+	hdr = msg->msg_data;
+
+	/*
+	 * Use mod_delayed_work() to schedule the delayed work
+	 * to avoid scheduling multiple workqueue items when
+	 * IPCs are sent at a high-rate. mod_delayed_work()
+	 * modifies the timer if the work is pending.
+	 * Also, a new delayed work should not be queued after the
+	 * the CTX_SAVE IPC, which is sent before the DSP enters D3.
+	 */
+	if (hdr->cmd != (SOF_IPC_GLB_PM_MSG | SOF_IPC_PM_CTX_SAVE))
+		mod_delayed_work(system_wq, &hdev->d0i3_work,
+				 msecs_to_jiffies(SOF_HDA_D0I3_WORK_DELAY_MS));
+
 	return 0;
 }
 
@@ -259,6 +279,15 @@ const struct snd_sof_dsp_ops sof_cnl_ops = {
 	.pcm_trigger	= hda_dsp_pcm_trigger,
 	.pcm_pointer	= hda_dsp_pcm_pointer,
 
+#if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA_PROBES)
+	/* probe callbacks */
+	.probe_assign	= hda_probe_compr_assign,
+	.probe_free	= hda_probe_compr_free,
+	.probe_set_params	= hda_probe_compr_set_params,
+	.probe_trigger	= hda_probe_compr_trigger,
+	.probe_pointer	= hda_probe_compr_pointer,
+#endif
+
 	/* firmware loading */
 	.load_firmware = snd_sof_load_firmware_raw,
 
diff --git a/sound/soc/sof/intel/hda-codec.c b/sound/soc/sof/intel/hda-codec.c
index ff45075..3041fbb 100644
--- a/sound/soc/sof/intel/hda-codec.c
+++ b/sound/soc/sof/intel/hda-codec.c
@@ -113,8 +113,14 @@ static int hda_codec_probe(struct snd_sof_dev *sdev, int address,
 	if (ret < 0)
 		return ret;
 
-	if ((resp & 0xFFFF0000) == IDISP_VID_INTEL)
+	if ((resp & 0xFFFF0000) == IDISP_VID_INTEL) {
+		if (!hdev->bus->audio_component) {
+			dev_dbg(sdev->dev,
+				"iDisp hw present but no driver\n");
+			return -ENOENT;
+		}
 		hda_priv->need_display_power = true;
+	}
 
 	/*
 	 * if common HDMI codec driver is not used, codec load
@@ -203,6 +209,9 @@ int hda_codec_i915_exit(struct snd_sof_dev *sdev)
 	struct hdac_bus *bus = sof_to_bus(sdev);
 	int ret;
 
+	if (!bus->audio_component)
+		return 0;
+
 	/* power down unconditionally */
 	snd_hdac_display_power(bus, HDA_CODEC_IDX_CONTROLLER, false);
 
diff --git a/sound/soc/sof/intel/hda-compress.c b/sound/soc/sof/intel/hda-compress.c
new file mode 100644
index 0000000..38a1ebe
--- /dev/null
+++ b/sound/soc/sof/intel/hda-compress.c
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+//
+// This file is provided under a dual BSD/GPLv2 license.  When using or
+// redistributing this file, you may do so under either license.
+//
+// Copyright(c) 2019-2020 Intel Corporation. All rights reserved.
+//
+// Author: Cezary Rojewski <cezary.rojewski@intel.com>
+//
+
+#include <sound/hdaudio_ext.h>
+#include <sound/soc.h>
+#include "../sof-priv.h"
+#include "hda.h"
+
+static inline struct hdac_ext_stream *
+hda_compr_get_stream(struct snd_compr_stream *cstream)
+{
+	return cstream->runtime->private_data;
+}
+
+int hda_probe_compr_assign(struct snd_sof_dev *sdev,
+			   struct snd_compr_stream *cstream,
+			   struct snd_soc_dai *dai)
+{
+	struct hdac_ext_stream *stream;
+
+	stream = hda_dsp_stream_get(sdev, cstream->direction);
+	if (!stream)
+		return -EBUSY;
+
+	hdac_stream(stream)->curr_pos = 0;
+	hdac_stream(stream)->cstream = cstream;
+	cstream->runtime->private_data = stream;
+
+	return hdac_stream(stream)->stream_tag;
+}
+
+int hda_probe_compr_free(struct snd_sof_dev *sdev,
+			 struct snd_compr_stream *cstream,
+			 struct snd_soc_dai *dai)
+{
+	struct hdac_ext_stream *stream = hda_compr_get_stream(cstream);
+	int ret;
+
+	ret = hda_dsp_stream_put(sdev, cstream->direction,
+				 hdac_stream(stream)->stream_tag);
+	if (ret < 0) {
+		dev_dbg(sdev->dev, "stream put failed: %d\n", ret);
+		return ret;
+	}
+
+	hdac_stream(stream)->cstream = NULL;
+	cstream->runtime->private_data = NULL;
+
+	return 0;
+}
+
+int hda_probe_compr_set_params(struct snd_sof_dev *sdev,
+			       struct snd_compr_stream *cstream,
+			       struct snd_compr_params *params,
+			       struct snd_soc_dai *dai)
+{
+	struct hdac_ext_stream *stream = hda_compr_get_stream(cstream);
+	struct hdac_stream *hstream = hdac_stream(stream);
+	struct snd_dma_buffer *dmab;
+	u32 bits, rate;
+	int bps, ret;
+
+	dmab = cstream->runtime->dma_buffer_p;
+	/* compr params do not store bit depth, default to S32_LE */
+	bps = snd_pcm_format_physical_width(SNDRV_PCM_FORMAT_S32_LE);
+	if (bps < 0)
+		return bps;
+	bits = hda_dsp_get_bits(sdev, bps);
+	rate = hda_dsp_get_mult_div(sdev, params->codec.sample_rate);
+
+	hstream->format_val = rate | bits | (params->codec.ch_out - 1);
+	hstream->bufsize = cstream->runtime->buffer_size;
+	hstream->period_bytes = cstream->runtime->fragment_size;
+	hstream->no_period_wakeup = 0;
+
+	ret = hda_dsp_stream_hw_params(sdev, stream, dmab, NULL);
+	if (ret < 0) {
+		dev_err(sdev->dev, "error: hdac prepare failed: %x\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+int hda_probe_compr_trigger(struct snd_sof_dev *sdev,
+			    struct snd_compr_stream *cstream, int cmd,
+			    struct snd_soc_dai *dai)
+{
+	struct hdac_ext_stream *stream = hda_compr_get_stream(cstream);
+
+	return hda_dsp_stream_trigger(sdev, stream, cmd);
+}
+
+int hda_probe_compr_pointer(struct snd_sof_dev *sdev,
+			    struct snd_compr_stream *cstream,
+			    struct snd_compr_tstamp *tstamp,
+			    struct snd_soc_dai *dai)
+{
+	struct hdac_ext_stream *stream = hda_compr_get_stream(cstream);
+	struct snd_soc_pcm_stream *pstream;
+
+	pstream = &dai->driver->capture;
+	tstamp->copied_total = hdac_stream(stream)->curr_pos;
+	tstamp->sampling_rate = snd_pcm_rate_bit_to_rate(pstream->rates);
+
+	return 0;
+}
diff --git a/sound/soc/sof/intel/hda-ctrl.c b/sound/soc/sof/intel/hda-ctrl.c
index 871b71a..6288b2f 100644
--- a/sound/soc/sof/intel/hda-ctrl.c
+++ b/sound/soc/sof/intel/hda-ctrl.c
@@ -18,6 +18,7 @@
 #include <linux/module.h>
 #include <sound/hdaudio_ext.h>
 #include <sound/hda_register.h>
+#include <sound/hda_component.h>
 #include "../ops.h"
 #include "hda.h"
 
@@ -64,15 +65,32 @@ int hda_dsp_ctrl_get_caps(struct snd_sof_dev *sdev)
 	struct hdac_bus *bus = sof_to_bus(sdev);
 	u32 cap, offset, feature;
 	int count = 0;
+	int ret;
+
+	/*
+	 * On some devices, one reset cycle is necessary before reading
+	 * capabilities
+	 */
+	ret = hda_dsp_ctrl_link_reset(sdev, true);
+	if (ret < 0)
+		return ret;
+	ret = hda_dsp_ctrl_link_reset(sdev, false);
+	if (ret < 0)
+		return ret;
 
 	offset = snd_sof_dsp_read(sdev, HDA_DSP_HDA_BAR, SOF_HDA_LLCH);
 
 	do {
-		cap = snd_sof_dsp_read(sdev, HDA_DSP_HDA_BAR, offset);
-
 		dev_dbg(sdev->dev, "checking for capabilities at offset 0x%x\n",
 			offset & SOF_HDA_CAP_NEXT_MASK);
 
+		cap = snd_sof_dsp_read(sdev, HDA_DSP_HDA_BAR, offset);
+
+		if (cap == -1) {
+			dev_dbg(bus->dev, "Invalid capability reg read\n");
+			break;
+		}
+
 		feature = (cap & SOF_HDA_CAP_ID_MASK) >> SOF_HDA_CAP_ID_OFF;
 
 		switch (feature) {
@@ -105,8 +123,8 @@ int hda_dsp_ctrl_get_caps(struct snd_sof_dev *sdev)
 			bus->mlcap = bus->remap_addr + offset;
 			break;
 		default:
-			dev_vdbg(sdev->dev, "found capability %d at 0x%x\n",
-				 feature, offset);
+			dev_dbg(sdev->dev, "found capability %d at 0x%x\n",
+				feature, offset);
 			break;
 		}
 
@@ -176,6 +194,9 @@ int hda_dsp_ctrl_init_chip(struct snd_sof_dev *sdev, bool full_reset)
 	if (bus->chip_init)
 		return 0;
 
+#if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA)
+	snd_hdac_set_codec_wakeup(bus, true);
+#endif
 	hda_dsp_ctrl_misc_clock_gating(sdev, false);
 
 	if (full_reset) {
@@ -183,7 +204,7 @@ int hda_dsp_ctrl_init_chip(struct snd_sof_dev *sdev, bool full_reset)
 		ret = hda_dsp_ctrl_link_reset(sdev, true);
 		if (ret < 0) {
 			dev_err(sdev->dev, "error: failed to reset HDA controller\n");
-			return ret;
+			goto err;
 		}
 
 		usleep_range(500, 1000);
@@ -192,7 +213,7 @@ int hda_dsp_ctrl_init_chip(struct snd_sof_dev *sdev, bool full_reset)
 		ret = hda_dsp_ctrl_link_reset(sdev, false);
 		if (ret < 0) {
 			dev_err(sdev->dev, "error: failed to exit HDA controller reset\n");
-			return ret;
+			goto err;
 		}
 
 		usleep_range(1000, 1200);
@@ -202,7 +223,8 @@ int hda_dsp_ctrl_init_chip(struct snd_sof_dev *sdev, bool full_reset)
 	/* check to see if controller is ready */
 	if (!snd_hdac_chip_readb(bus, GCTL)) {
 		dev_dbg(bus->dev, "controller not ready!\n");
-		return -EBUSY;
+		ret = -EBUSY;
+		goto err;
 	}
 
 	/* Accept unsolicited responses */
@@ -268,7 +290,11 @@ int hda_dsp_ctrl_init_chip(struct snd_sof_dev *sdev, bool full_reset)
 
 	bus->chip_init = true;
 
+err:
 	hda_dsp_ctrl_misc_clock_gating(sdev, true);
+#if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA)
+	snd_hdac_set_codec_wakeup(bus, false);
+#endif
 
 	return ret;
 }
diff --git a/sound/soc/sof/intel/hda-dai.c b/sound/soc/sof/intel/hda-dai.c
index 9c6e3f9..833dc30 100644
--- a/sound/soc/sof/intel/hda-dai.c
+++ b/sound/soc/sof/intel/hda-dai.c
@@ -204,7 +204,7 @@ static int hda_link_hw_params(struct snd_pcm_substream *substream,
 	struct hdac_bus *bus = hstream->bus;
 	struct hdac_ext_stream *link_dev;
 	struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	struct sof_intel_hda_stream *hda_stream;
 	struct hda_pipe_params p_params = {0};
 	struct hdac_ext_link *link;
@@ -293,7 +293,7 @@ static int hda_link_pcm_trigger(struct snd_pcm_substream *substream,
 	bus = hstream->bus;
 	rtd = snd_pcm_substream_chip(substream);
 
-	link = snd_hdac_ext_bus_get_link(bus, rtd->codec_dai->component->name);
+	link = snd_hdac_ext_bus_get_link(bus, asoc_rtd_to_codec(rtd, 0)->component->name);
 	if (!link)
 		return -EINVAL;
 
@@ -374,7 +374,7 @@ static int hda_link_hw_free(struct snd_pcm_substream *substream,
 	if (ret < 0)
 		return ret;
 
-	link = snd_hdac_ext_bus_get_link(bus, rtd->codec_dai->component->name);
+	link = snd_hdac_ext_bus_get_link(bus, asoc_rtd_to_codec(rtd, 0)->component->name);
 	if (!link)
 		return -EINVAL;
 
@@ -399,6 +399,19 @@ static const struct snd_soc_dai_ops hda_link_dai_ops = {
 	.trigger = hda_link_pcm_trigger,
 	.prepare = hda_link_pcm_prepare,
 };
+
+#if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA_PROBES)
+#include "../compress.h"
+
+static struct snd_soc_cdai_ops sof_probe_compr_ops = {
+	.startup	= sof_probe_compr_open,
+	.shutdown	= sof_probe_compr_free,
+	.set_params	= sof_probe_compr_set_params,
+	.trigger	= sof_probe_compr_trigger,
+	.pointer	= sof_probe_compr_pointer,
+};
+
+#endif
 #endif
 
 /*
@@ -409,56 +422,167 @@ static const struct snd_soc_dai_ops hda_link_dai_ops = {
 struct snd_soc_dai_driver skl_dai[] = {
 {
 	.name = "SSP0 Pin",
+	.playback = {
+		.channels_min = 1,
+		.channels_max = 8,
+	},
+	.capture = {
+		.channels_min = 1,
+		.channels_max = 8,
+	},
 },
 {
 	.name = "SSP1 Pin",
+	.playback = {
+		.channels_min = 1,
+		.channels_max = 8,
+	},
+	.capture = {
+		.channels_min = 1,
+		.channels_max = 8,
+	},
 },
 {
 	.name = "SSP2 Pin",
+	.playback = {
+		.channels_min = 1,
+		.channels_max = 8,
+	},
+	.capture = {
+		.channels_min = 1,
+		.channels_max = 8,
+	},
 },
 {
 	.name = "SSP3 Pin",
+	.playback = {
+		.channels_min = 1,
+		.channels_max = 8,
+	},
+	.capture = {
+		.channels_min = 1,
+		.channels_max = 8,
+	},
 },
 {
 	.name = "SSP4 Pin",
+	.playback = {
+		.channels_min = 1,
+		.channels_max = 8,
+	},
+	.capture = {
+		.channels_min = 1,
+		.channels_max = 8,
+	},
 },
 {
 	.name = "SSP5 Pin",
+	.playback = {
+		.channels_min = 1,
+		.channels_max = 8,
+	},
+	.capture = {
+		.channels_min = 1,
+		.channels_max = 8,
+	},
 },
 {
 	.name = "DMIC01 Pin",
+	.capture = {
+		.channels_min = 1,
+		.channels_max = 4,
+	},
 },
 {
 	.name = "DMIC16k Pin",
+	.capture = {
+		.channels_min = 1,
+		.channels_max = 4,
+	},
 },
 #if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA)
 {
 	.name = "iDisp1 Pin",
 	.ops = &hda_link_dai_ops,
+	.playback = {
+		.channels_min = 1,
+		.channels_max = 8,
+	},
 },
 {
 	.name = "iDisp2 Pin",
 	.ops = &hda_link_dai_ops,
+	.playback = {
+		.channels_min = 1,
+		.channels_max = 8,
+	},
 },
 {
 	.name = "iDisp3 Pin",
 	.ops = &hda_link_dai_ops,
+	.playback = {
+		.channels_min = 1,
+		.channels_max = 8,
+	},
 },
 {
 	.name = "iDisp4 Pin",
 	.ops = &hda_link_dai_ops,
+	.playback = {
+		.channels_min = 1,
+		.channels_max = 8,
+	},
 },
 {
 	.name = "Analog CPU DAI",
 	.ops = &hda_link_dai_ops,
+	.playback = {
+		.channels_min = 1,
+		.channels_max = 16,
+	},
+	.capture = {
+		.channels_min = 1,
+		.channels_max = 16,
+	},
 },
 {
 	.name = "Digital CPU DAI",
 	.ops = &hda_link_dai_ops,
+	.playback = {
+		.channels_min = 1,
+		.channels_max = 16,
+	},
+	.capture = {
+		.channels_min = 1,
+		.channels_max = 16,
+	},
 },
 {
 	.name = "Alt Analog CPU DAI",
 	.ops = &hda_link_dai_ops,
+	.playback = {
+		.channels_min = 1,
+		.channels_max = 16,
+	},
+	.capture = {
+		.channels_min = 1,
+		.channels_max = 16,
+	},
 },
+#if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA_PROBES)
+{
+	.name = "Probe Extraction CPU DAI",
+	.compress_new = snd_soc_new_compress,
+	.cops = &sof_probe_compr_ops,
+	.capture = {
+		.stream_name = "Probe Extraction",
+		.channels_min = 1,
+		.channels_max = 8,
+		.rates = SNDRV_PCM_RATE_48000,
+		.rate_min = 48000,
+		.rate_max = 48000,
+	},
+},
+#endif
 #endif
 };
diff --git a/sound/soc/sof/intel/hda-dsp.c b/sound/soc/sof/intel/hda-dsp.c
index 0848b79..99087b6 100644
--- a/sound/soc/sof/intel/hda-dsp.c
+++ b/sound/soc/sof/intel/hda-dsp.c
@@ -15,12 +15,21 @@
  * Hardware interface for generic Intel audio DSP HDA IP
  */
 
+#include <linux/module.h>
 #include <sound/hdaudio_ext.h>
 #include <sound/hda_register.h>
+#include "../sof-audio.h"
 #include "../ops.h"
 #include "hda.h"
 #include "hda-ipc.h"
 
+static bool hda_enable_trace_D0I3_S0;
+#if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG)
+module_param_named(enable_trace_D0I3_S0, hda_enable_trace_D0I3_S0, bool, 0444);
+MODULE_PARM_DESC(enable_trace_D0I3_S0,
+		 "SOF HDA enable trace when the DSP is in D0I3 in S0");
+#endif
+
 /*
  * DSP Core control.
  */
@@ -334,17 +343,15 @@ static int hda_dsp_send_pm_gate_ipc(struct snd_sof_dev *sdev, u32 flags)
 	pm_gate.flags = flags;
 
 	/* send pm_gate ipc to dsp */
-	return sof_ipc_tx_message(sdev->ipc, pm_gate.hdr.cmd, &pm_gate,
-				  sizeof(pm_gate), &reply, sizeof(reply));
+	return sof_ipc_tx_message_no_pm(sdev->ipc, pm_gate.hdr.cmd,
+					&pm_gate, sizeof(pm_gate), &reply,
+					sizeof(reply));
 }
 
-int hda_dsp_set_power_state(struct snd_sof_dev *sdev,
-			    enum sof_d0_substate d0_substate)
+static int hda_dsp_update_d0i3c_register(struct snd_sof_dev *sdev, u8 value)
 {
 	struct hdac_bus *bus = sof_to_bus(sdev);
-	u32 flags;
 	int ret;
-	u8 value;
 
 	/* Write to D0I3C after Command-In-Progress bit is cleared */
 	ret = hda_dsp_wait_d0i3c_done(sdev);
@@ -354,7 +361,6 @@ int hda_dsp_set_power_state(struct snd_sof_dev *sdev,
 	}
 
 	/* Update D0I3C register */
-	value = d0_substate == SOF_DSP_D0I3 ? SOF_HDA_VS_D0I3C_I3 : 0;
 	snd_hdac_chip_updateb(bus, VS_D0I3C, SOF_HDA_VS_D0I3C_I3, value);
 
 	/* Wait for cmd in progress to be cleared before exiting the function */
@@ -367,20 +373,218 @@ int hda_dsp_set_power_state(struct snd_sof_dev *sdev,
 	dev_vdbg(bus->dev, "D0I3C updated, register = 0x%x\n",
 		 snd_hdac_chip_readb(bus, VS_D0I3C));
 
-	if (d0_substate == SOF_DSP_D0I0)
-		flags = HDA_PM_PPG;/* prevent power gating in D0 */
-	else
-		flags = HDA_PM_NO_DMA_TRACE;/* disable DMA trace in D0I3*/
+	return 0;
+}
 
-	/* sending pm_gate IPC */
-	ret = hda_dsp_send_pm_gate_ipc(sdev, flags);
+static int hda_dsp_set_D0_state(struct snd_sof_dev *sdev,
+				const struct sof_dsp_power_state *target_state)
+{
+	u32 flags = 0;
+	int ret;
+	u8 value = 0;
+
+	/*
+	 * Sanity check for illegal state transitions
+	 * The only allowed transitions are:
+	 * 1. D3 -> D0I0
+	 * 2. D0I0 -> D0I3
+	 * 3. D0I3 -> D0I0
+	 */
+	switch (sdev->dsp_power_state.state) {
+	case SOF_DSP_PM_D0:
+		/* Follow the sequence below for D0 substate transitions */
+		break;
+	case SOF_DSP_PM_D3:
+		/* Follow regular flow for D3 -> D0 transition */
+		return 0;
+	default:
+		dev_err(sdev->dev, "error: transition from %d to %d not allowed\n",
+			sdev->dsp_power_state.state, target_state->state);
+		return -EINVAL;
+	}
+
+	/* Set flags and register value for D0 target substate */
+	if (target_state->substate == SOF_HDA_DSP_PM_D0I3) {
+		value = SOF_HDA_VS_D0I3C_I3;
+
+		/*
+		 * Trace DMA is disabled by default when the DSP enters D0I3.
+		 * But it can be kept enabled when the DSP enters D0I3 while the
+		 * system is in S0 for debug.
+		 */
+		if (hda_enable_trace_D0I3_S0 &&
+		    sdev->system_suspend_target != SOF_SUSPEND_NONE)
+			flags = HDA_PM_NO_DMA_TRACE;
+	} else {
+		/* prevent power gating in D0I0 */
+		flags = HDA_PM_PPG;
+	}
+
+	/* update D0I3C register */
+	ret = hda_dsp_update_d0i3c_register(sdev, value);
 	if (ret < 0)
+		return ret;
+
+	/*
+	 * Notify the DSP of the state change.
+	 * If this IPC fails, revert the D0I3C register update in order
+	 * to prevent partial state change.
+	 */
+	ret = hda_dsp_send_pm_gate_ipc(sdev, flags);
+	if (ret < 0) {
 		dev_err(sdev->dev,
 			"error: PM_GATE ipc error %d\n", ret);
+		goto revert;
+	}
+
+	return ret;
+
+revert:
+	/* fallback to the previous register value */
+	value = value ? 0 : SOF_HDA_VS_D0I3C_I3;
+
+	/*
+	 * This can fail but return the IPC error to signal that
+	 * the state change failed.
+	 */
+	hda_dsp_update_d0i3c_register(sdev, value);
 
 	return ret;
 }
 
+/* helper to log DSP state */
+static void hda_dsp_state_log(struct snd_sof_dev *sdev)
+{
+	switch (sdev->dsp_power_state.state) {
+	case SOF_DSP_PM_D0:
+		switch (sdev->dsp_power_state.substate) {
+		case SOF_HDA_DSP_PM_D0I0:
+			dev_dbg(sdev->dev, "Current DSP power state: D0I0\n");
+			break;
+		case SOF_HDA_DSP_PM_D0I3:
+			dev_dbg(sdev->dev, "Current DSP power state: D0I3\n");
+			break;
+		default:
+			dev_dbg(sdev->dev, "Unknown DSP D0 substate: %d\n",
+				sdev->dsp_power_state.substate);
+			break;
+		}
+		break;
+	case SOF_DSP_PM_D1:
+		dev_dbg(sdev->dev, "Current DSP power state: D1\n");
+		break;
+	case SOF_DSP_PM_D2:
+		dev_dbg(sdev->dev, "Current DSP power state: D2\n");
+		break;
+	case SOF_DSP_PM_D3_HOT:
+		dev_dbg(sdev->dev, "Current DSP power state: D3_HOT\n");
+		break;
+	case SOF_DSP_PM_D3:
+		dev_dbg(sdev->dev, "Current DSP power state: D3\n");
+		break;
+	case SOF_DSP_PM_D3_COLD:
+		dev_dbg(sdev->dev, "Current DSP power state: D3_COLD\n");
+		break;
+	default:
+		dev_dbg(sdev->dev, "Unknown DSP power state: %d\n",
+			sdev->dsp_power_state.state);
+		break;
+	}
+}
+
+/*
+ * All DSP power state transitions are initiated by the driver.
+ * If the requested state change fails, the error is simply returned.
+ * Further state transitions are attempted only when the set_power_save() op
+ * is called again either because of a new IPC sent to the DSP or
+ * during system suspend/resume.
+ */
+int hda_dsp_set_power_state(struct snd_sof_dev *sdev,
+			    const struct sof_dsp_power_state *target_state)
+{
+	int ret = 0;
+
+	/*
+	 * When the DSP is already in D0I3 and the target state is D0I3,
+	 * it could be the case that the DSP is in D0I3 during S0
+	 * and the system is suspending to S0Ix. Therefore,
+	 * hda_dsp_set_D0_state() must be called to disable trace DMA
+	 * by sending the PM_GATE IPC to the FW.
+	 */
+	if (target_state->substate == SOF_HDA_DSP_PM_D0I3 &&
+	    sdev->system_suspend_target == SOF_SUSPEND_S0IX)
+		goto set_state;
+
+	/*
+	 * For all other cases, return without doing anything if
+	 * the DSP is already in the target state.
+	 */
+	if (target_state->state == sdev->dsp_power_state.state &&
+	    target_state->substate == sdev->dsp_power_state.substate)
+		return 0;
+
+set_state:
+	switch (target_state->state) {
+	case SOF_DSP_PM_D0:
+		ret = hda_dsp_set_D0_state(sdev, target_state);
+		break;
+	case SOF_DSP_PM_D3:
+		/* The only allowed transition is: D0I0 -> D3 */
+		if (sdev->dsp_power_state.state == SOF_DSP_PM_D0 &&
+		    sdev->dsp_power_state.substate == SOF_HDA_DSP_PM_D0I0)
+			break;
+
+		dev_err(sdev->dev,
+			"error: transition from %d to %d not allowed\n",
+			sdev->dsp_power_state.state, target_state->state);
+		return -EINVAL;
+	default:
+		dev_err(sdev->dev, "error: target state unsupported %d\n",
+			target_state->state);
+		return -EINVAL;
+	}
+	if (ret < 0) {
+		dev_err(sdev->dev,
+			"failed to set requested target DSP state %d substate %d\n",
+			target_state->state, target_state->substate);
+		return ret;
+	}
+
+	sdev->dsp_power_state = *target_state;
+	hda_dsp_state_log(sdev);
+	return ret;
+}
+
+/*
+ * Audio DSP states may transform as below:-
+ *
+ *                                         Opportunistic D0I3 in S0
+ *     Runtime    +---------------------+  Delayed D0i3 work timeout
+ *     suspend    |                     +--------------------+
+ *   +------------+       D0I0(active)  |                    |
+ *   |            |                     <---------------+    |
+ *   |   +-------->                     |    New IPC	|    |
+ *   |   |Runtime +--^--+---------^--+--+ (via mailbox)	|    |
+ *   |   |resume     |  |         |  |			|    |
+ *   |   |           |  |         |  |			|    |
+ *   |   |     System|  |         |  |			|    |
+ *   |   |     resume|  | S3/S0IX |  |                  |    |
+ *   |   |	     |  | suspend |  | S0IX             |    |
+ *   |   |           |  |         |  |suspend           |    |
+ *   |   |           |  |         |  |                  |    |
+ *   |   |           |  |         |  |                  |    |
+ * +-v---+-----------+--v-------+ |  |           +------+----v----+
+ * |                            | |  +----------->                |
+ * |       D3 (suspended)       | |              |      D0I3      |
+ * |                            | +--------------+                |
+ * |                            |  System resume |                |
+ * +----------------------------+		 +----------------+
+ *
+ * S0IX suspend: The DSP is in D0I3 if any D0I3-compatible streams
+ *		 ignored the suspend trigger. Otherwise the DSP
+ *		 is in D3.
+ */
+
 static int hda_suspend(struct snd_sof_dev *sdev, bool runtime_suspend)
 {
 	struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata;
@@ -390,6 +594,8 @@ static int hda_suspend(struct snd_sof_dev *sdev, bool runtime_suspend)
 #endif
 	int ret;
 
+	hda_sdw_int_enable(sdev, false);
+
 	/* disable IPC interrupts */
 	hda_dsp_ipc_int_disable(sdev);
 
@@ -486,10 +692,24 @@ int hda_dsp_resume(struct snd_sof_dev *sdev)
 {
 	struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata;
 	struct pci_dev *pci = to_pci_dev(sdev->dev);
+	const struct sof_dsp_power_state target_state = {
+		.state = SOF_DSP_PM_D0,
+		.substate = SOF_HDA_DSP_PM_D0I0,
+	};
+	int ret;
 
-	if (sdev->s0_suspend) {
+	/* resume from D0I3 */
+	if (sdev->dsp_power_state.state == SOF_DSP_PM_D0) {
 		hda_codec_i915_display_power(sdev, true);
 
+		/* Set DSP power state */
+		ret = snd_sof_dsp_set_power_state(sdev, &target_state);
+		if (ret < 0) {
+			dev_err(sdev->dev, "error: setting dsp state %d substate %d\n",
+				target_state.state, target_state.substate);
+			return ret;
+		}
+
 		/* restore L1SEN bit */
 		if (hda->l1_support_changed)
 			snd_sof_dsp_update_bits(sdev, HDA_DSP_HDA_BAR,
@@ -503,13 +723,26 @@ int hda_dsp_resume(struct snd_sof_dev *sdev)
 	}
 
 	/* init hda controller. DSP cores will be powered up during fw boot */
-	return hda_resume(sdev, false);
+	ret = hda_resume(sdev, false);
+	if (ret < 0)
+		return ret;
+
+	return snd_sof_dsp_set_power_state(sdev, &target_state);
 }
 
 int hda_dsp_runtime_resume(struct snd_sof_dev *sdev)
 {
+	const struct sof_dsp_power_state target_state = {
+		.state = SOF_DSP_PM_D0,
+	};
+	int ret;
+
 	/* init hda controller. DSP cores will be powered up during fw boot */
-	return hda_resume(sdev, true);
+	ret = hda_resume(sdev, true);
+	if (ret < 0)
+		return ret;
+
+	return snd_sof_dsp_set_power_state(sdev, &target_state);
 }
 
 int hda_dsp_runtime_idle(struct snd_sof_dev *sdev)
@@ -527,21 +760,47 @@ int hda_dsp_runtime_idle(struct snd_sof_dev *sdev)
 
 int hda_dsp_runtime_suspend(struct snd_sof_dev *sdev)
 {
+	const struct sof_dsp_power_state target_state = {
+		.state = SOF_DSP_PM_D3,
+	};
+	int ret;
+
 	/* stop hda controller and power dsp off */
-	return hda_suspend(sdev, true);
+	ret = hda_suspend(sdev, true);
+	if (ret < 0)
+		return ret;
+
+	return snd_sof_dsp_set_power_state(sdev, &target_state);
 }
 
-int hda_dsp_suspend(struct snd_sof_dev *sdev)
+int hda_dsp_suspend(struct snd_sof_dev *sdev, u32 target_state)
 {
 	struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata;
 	struct hdac_bus *bus = sof_to_bus(sdev);
 	struct pci_dev *pci = to_pci_dev(sdev->dev);
+	const struct sof_dsp_power_state target_dsp_state = {
+		.state = target_state,
+		.substate = target_state == SOF_DSP_PM_D0 ?
+				SOF_HDA_DSP_PM_D0I3 : 0,
+	};
 	int ret;
 
-	if (sdev->s0_suspend) {
+	/* cancel any attempt for DSP D0I3 */
+	cancel_delayed_work_sync(&hda->d0i3_work);
+
+	if (target_state == SOF_DSP_PM_D0) {
 		/* we can't keep a wakeref to display driver at suspend */
 		hda_codec_i915_display_power(sdev, false);
 
+		/* Set DSP power state */
+		ret = snd_sof_dsp_set_power_state(sdev, &target_dsp_state);
+		if (ret < 0) {
+			dev_err(sdev->dev, "error: setting dsp state %d substate %d\n",
+				target_dsp_state.state,
+				target_dsp_state.substate);
+			return ret;
+		}
+
 		/* enable L1SEN to make sure the system can enter S0Ix */
 		hda->l1_support_changed =
 			snd_sof_dsp_update_bits(sdev, HDA_DSP_HDA_BAR,
@@ -562,7 +821,7 @@ int hda_dsp_suspend(struct snd_sof_dev *sdev)
 		return ret;
 	}
 
-	return 0;
+	return snd_sof_dsp_set_power_state(sdev, &target_dsp_state);
 }
 
 int hda_dsp_set_hw_params_upon_resume(struct snd_sof_dev *sdev)
@@ -588,7 +847,7 @@ int hda_dsp_set_hw_params_upon_resume(struct snd_sof_dev *sdev)
 		 */
 		if (stream->link_substream) {
 			rtd = snd_pcm_substream_chip(stream->link_substream);
-			name = rtd->codec_dai->component->name;
+			name = asoc_rtd_to_codec(rtd, 0)->component->name;
 			link = snd_hdac_ext_bus_get_link(bus, name);
 			if (!link)
 				return -EINVAL;
@@ -606,3 +865,33 @@ int hda_dsp_set_hw_params_upon_resume(struct snd_sof_dev *sdev)
 #endif
 	return 0;
 }
+
+void hda_dsp_d0i3_work(struct work_struct *work)
+{
+	struct sof_intel_hda_dev *hdev = container_of(work,
+						      struct sof_intel_hda_dev,
+						      d0i3_work.work);
+	struct hdac_bus *bus = &hdev->hbus.core;
+	struct snd_sof_dev *sdev = dev_get_drvdata(bus->dev);
+	struct sof_dsp_power_state target_state;
+	int ret;
+
+	target_state.state = SOF_DSP_PM_D0;
+
+	/* DSP can enter D0I3 iff only D0I3-compatible streams are active */
+	if (snd_sof_dsp_only_d0i3_compatible_stream_active(sdev))
+		target_state.substate = SOF_HDA_DSP_PM_D0I3;
+	else
+		target_state.substate = SOF_HDA_DSP_PM_D0I0;
+
+	/* remain in D0I0 */
+	if (target_state.substate == SOF_HDA_DSP_PM_D0I0)
+		return;
+
+	/* This can fail but error cannot be propagated */
+	ret = snd_sof_dsp_set_power_state(sdev, &target_state);
+	if (ret < 0)
+		dev_err_ratelimited(sdev->dev,
+				    "error: failed to set DSP state %d substate %d\n",
+				    target_state.state, target_state.substate);
+}
diff --git a/sound/soc/sof/intel/hda-ipc.c b/sound/soc/sof/intel/hda-ipc.c
index 1837f66..6062bb6 100644
--- a/sound/soc/sof/intel/hda-ipc.c
+++ b/sound/soc/sof/intel/hda-ipc.c
@@ -106,7 +106,9 @@ void hda_dsp_ipc_get_reply(struct snd_sof_dev *sdev)
 		ret = reply.error;
 	} else {
 		/* reply correct size ? */
-		if (reply.hdr.size != msg->reply_size) {
+		if (reply.hdr.size != msg->reply_size &&
+			/* getter payload is never known upfront */
+			!(reply.hdr.cmd & SOF_IPC_GLB_PROBE)) {
 			dev_err(sdev->dev, "error: reply expected %zu got %u bytes\n",
 				msg->reply_size, reply.hdr.size);
 			ret = -EINVAL;
@@ -123,12 +125,6 @@ void hda_dsp_ipc_get_reply(struct snd_sof_dev *sdev)
 
 }
 
-static bool hda_dsp_ipc_is_sof(uint32_t msg)
-{
-	return (msg & (HDA_DSP_IPC_PURGE_FW | 0xf << 9)) != msg ||
-		(msg & HDA_DSP_IPC_PURGE_FW) != HDA_DSP_IPC_PURGE_FW;
-}
-
 /* IPC handler thread */
 irqreturn_t hda_dsp_ipc_irq_thread(int irq, void *context)
 {
@@ -174,17 +170,9 @@ irqreturn_t hda_dsp_ipc_irq_thread(int irq, void *context)
 		 */
 		spin_lock_irq(&sdev->ipc_lock);
 
-		/* handle immediate reply from DSP core - ignore ROM messages */
-		if (hda_dsp_ipc_is_sof(msg)) {
-			hda_dsp_ipc_get_reply(sdev);
-			snd_sof_ipc_reply(sdev, msg);
-		}
-
-		/* wake up sleeper if we are loading code */
-		if (sdev->code_loading)	{
-			sdev->code_loading = 0;
-			wake_up(&sdev->waitq);
-		}
+		/* handle immediate reply from DSP core */
+		hda_dsp_ipc_get_reply(sdev);
+		snd_sof_ipc_reply(sdev, msg);
 
 		/* set the done bit */
 		hda_dsp_ipc_dsp_done(sdev);
diff --git a/sound/soc/sof/intel/hda-loader.c b/sound/soc/sof/intel/hda-loader.c
index 8852184..e1550cc 100644
--- a/sound/soc/sof/intel/hda-loader.c
+++ b/sound/soc/sof/intel/hda-loader.c
@@ -131,6 +131,12 @@ static int cl_dsp_init(struct snd_sof_dev *sdev, const void *fwdata,
 		goto err;
 	}
 
+	/* set DONE bit to clear the reply IPC message */
+	snd_sof_dsp_update_bits_forced(sdev, HDA_DSP_BAR,
+				       chip->ipc_ack,
+				       chip->ipc_ack_mask,
+				       chip->ipc_ack_mask);
+
 	/* step 5: power down corex */
 	ret = hda_dsp_core_power_down(sdev,
 				  chip->cores_mask & ~(HDA_DSP_CORE_MASK(0)));
@@ -173,9 +179,6 @@ static int cl_trigger(struct snd_sof_dev *sdev,
 	/* code loader is special case that reuses stream ops */
 	switch (cmd) {
 	case SNDRV_PCM_TRIGGER_START:
-		wait_event_timeout(sdev->waitq, !sdev->code_loading,
-				   HDA_DSP_CL_TRIGGER_TIMEOUT);
-
 		snd_sof_dsp_update_bits(sdev, HDA_DSP_HDA_BAR, SOF_HDA_INTCTL,
 					1 << hstream->index,
 					1 << hstream->index);
@@ -344,6 +347,24 @@ int hda_dsp_cl_boot_firmware(struct snd_sof_dev *sdev)
 	}
 
 	/*
+	 * When a SoundWire link is in clock stop state, a Slave
+	 * device may trigger in-band wakes for events such as jack
+	 * insertion or acoustic event detection. This event will lead
+	 * to a WAKEEN interrupt, handled by the PCI device and routed
+	 * to PME if the PCI device is in D3. The resume function in
+	 * audio PCI driver will be invoked by ACPI for PME event and
+	 * initialize the device and process WAKEEN interrupt.
+	 *
+	 * The WAKEEN interrupt should be processed ASAP to prevent an
+	 * interrupt flood, otherwise other interrupts, such IPC,
+	 * cannot work normally.  The WAKEEN is handled after the ROM
+	 * is initialized successfully, which ensures power rails are
+	 * enabled before accessing the SoundWire SHIM registers
+	 */
+	if (!sdev->first_boot)
+		hda_sdw_process_wakeen(sdev);
+
+	/*
 	 * at this point DSP ROM has been initialized and
 	 * should be ready for code loading and firmware boot
 	 */
@@ -396,6 +417,19 @@ int hda_dsp_pre_fw_run(struct snd_sof_dev *sdev)
 /* post fw run operations */
 int hda_dsp_post_fw_run(struct snd_sof_dev *sdev)
 {
+	int ret;
+
+	if (sdev->first_boot) {
+		ret = hda_sdw_startup(sdev);
+		if (ret < 0) {
+			dev_err(sdev->dev,
+				"error: could not startup SoundWire links\n");
+			return ret;
+		}
+	}
+
+	hda_sdw_int_enable(sdev, true);
+
 	/* re-enable clock gating and power gating */
 	return hda_dsp_ctrl_clock_power_gating(sdev, true);
 }
diff --git a/sound/soc/sof/intel/hda-pcm.c b/sound/soc/sof/intel/hda-pcm.c
index 23872f6..a46a6ba 100644
--- a/sound/soc/sof/intel/hda-pcm.c
+++ b/sound/soc/sof/intel/hda-pcm.c
@@ -27,7 +27,7 @@
 #define SDnFMT_BITS(x)	((x) << 4)
 #define SDnFMT_CHAN(x)	((x) << 0)
 
-static inline u32 get_mult_div(struct snd_sof_dev *sdev, int rate)
+u32 hda_dsp_get_mult_div(struct snd_sof_dev *sdev, int rate)
 {
 	switch (rate) {
 	case 8000:
@@ -61,7 +61,7 @@ static inline u32 get_mult_div(struct snd_sof_dev *sdev, int rate)
 	}
 };
 
-static inline u32 get_bits(struct snd_sof_dev *sdev, int sample_bits)
+u32 hda_dsp_get_bits(struct snd_sof_dev *sdev, int sample_bits)
 {
 	switch (sample_bits) {
 	case 8:
@@ -95,8 +95,8 @@ int hda_dsp_pcm_hw_params(struct snd_sof_dev *sdev,
 	u32 size, rate, bits;
 
 	size = params_buffer_bytes(params);
-	rate = get_mult_div(sdev, params_rate(params));
-	bits = get_bits(sdev, params_width(params));
+	rate = hda_dsp_get_mult_div(sdev, params_rate(params));
+	bits = hda_dsp_get_bits(sdev, params_width(params));
 
 	hstream->substream = substream;
 
diff --git a/sound/soc/sof/intel/hda-stream.c b/sound/soc/sof/intel/hda-stream.c
index c0ab9bb..5d38695 100644
--- a/sound/soc/sof/intel/hda-stream.c
+++ b/sound/soc/sof/intel/hda-stream.c
@@ -547,6 +547,8 @@ int hda_dsp_stream_hw_free(struct snd_sof_dev *sdev,
 					SOF_HDA_REG_PP_PPCTL, mask, 0);
 	spin_unlock_irq(&bus->reg_lock);
 
+	stream->substream = NULL;
+
 	return 0;
 }
 
@@ -571,6 +573,22 @@ bool hda_dsp_check_stream_irq(struct snd_sof_dev *sdev)
 	return ret;
 }
 
+static void
+hda_dsp_set_bytes_transferred(struct hdac_stream *hstream, u64 buffer_size)
+{
+	u64 prev_pos, pos, num_bytes;
+
+	div64_u64_rem(hstream->curr_pos, buffer_size, &prev_pos);
+	pos = snd_hdac_stream_get_pos_posbuf(hstream);
+
+	if (pos < prev_pos)
+		num_bytes = (buffer_size - prev_pos) +  pos;
+	else
+		num_bytes = pos - prev_pos;
+
+	hstream->curr_pos += num_bytes;
+}
+
 static bool hda_dsp_stream_check(struct hdac_bus *bus, u32 status)
 {
 	struct sof_intel_hda_dev *sof_hda = bus_to_sof_hda(bus);
@@ -588,14 +606,19 @@ static bool hda_dsp_stream_check(struct hdac_bus *bus, u32 status)
 			snd_hdac_stream_writeb(s, SD_STS, sd_status);
 
 			active = true;
-			if (!s->substream ||
+			if ((!s->substream && !s->cstream) ||
 			    !s->running ||
 			    (sd_status & SOF_HDA_CL_DMA_SD_INT_COMPLETE) == 0)
 				continue;
 
 			/* Inform ALSA only in case not do that with IPC */
-			if (sof_hda->no_ipc_position)
+			if (s->substream && sof_hda->no_ipc_position) {
 				snd_sof_pcm_period_elapsed(s->substream);
+			} else if (s->cstream) {
+				hda_dsp_set_bytes_transferred(s,
+					s->cstream->runtime->buffer_size);
+				snd_compr_fragment_elapsed(s->cstream);
+			}
 		}
 	}
 
diff --git a/sound/soc/sof/intel/hda.c b/sound/soc/sof/intel/hda.c
index 25946a1..211e91e 100644
--- a/sound/soc/sof/intel/hda.c
+++ b/sound/soc/sof/intel/hda.c
@@ -18,10 +18,14 @@
 #include <sound/hdaudio_ext.h>
 #include <sound/hda_register.h>
 
+#include <linux/acpi.h>
 #include <linux/module.h>
+#include <linux/soundwire/sdw.h>
+#include <linux/soundwire/sdw_intel.h>
 #include <sound/intel-nhlt.h>
 #include <sound/sof.h>
 #include <sound/sof/xtensa.h>
+#include "../sof-audio.h"
 #include "../ops.h"
 #include "hda.h"
 
@@ -34,6 +38,235 @@
 
 #define EXCEPT_MAX_HDR_SIZE	0x400
 
+#if IS_ENABLED(CONFIG_SND_SOC_SOF_INTEL_SOUNDWIRE)
+
+/*
+ * The default for SoundWire clock stop quirks is to power gate the IP
+ * and do a Bus Reset, this will need to be modified when the DSP
+ * needs to remain in D0i3 so that the Master does not lose context
+ * and enumeration is not required on clock restart
+ */
+static int sdw_clock_stop_quirks = SDW_INTEL_CLK_STOP_BUS_RESET;
+module_param(sdw_clock_stop_quirks, int, 0444);
+MODULE_PARM_DESC(sdw_clock_stop_quirks, "SOF SoundWire clock stop quirks");
+
+static int sdw_params_stream(struct device *dev,
+			     struct sdw_intel_stream_params_data *params_data)
+{
+	struct snd_sof_dev *sdev = dev_get_drvdata(dev);
+	struct snd_soc_dai *d = params_data->dai;
+	struct sof_ipc_dai_config config;
+	struct sof_ipc_reply reply;
+	int link_id = params_data->link_id;
+	int alh_stream_id = params_data->alh_stream_id;
+	int ret;
+	u32 size = sizeof(config);
+
+	memset(&config, 0, size);
+	config.hdr.size = size;
+	config.hdr.cmd = SOF_IPC_GLB_DAI_MSG | SOF_IPC_DAI_CONFIG;
+	config.type = SOF_DAI_INTEL_ALH;
+	config.dai_index = (link_id << 8) | (d->id);
+	config.alh.stream_id = alh_stream_id;
+
+	/* send message to DSP */
+	ret = sof_ipc_tx_message(sdev->ipc,
+				 config.hdr.cmd, &config, size, &reply,
+				 sizeof(reply));
+	if (ret < 0) {
+		dev_err(sdev->dev,
+			"error: failed to set DAI hw_params for link %d dai->id %d ALH %d\n",
+			link_id, d->id, alh_stream_id);
+	}
+
+	return ret;
+}
+
+static int sdw_free_stream(struct device *dev,
+			   struct sdw_intel_stream_free_data *free_data)
+{
+	struct snd_sof_dev *sdev = dev_get_drvdata(dev);
+	struct snd_soc_dai *d = free_data->dai;
+	struct sof_ipc_dai_config config;
+	struct sof_ipc_reply reply;
+	int link_id = free_data->link_id;
+	int ret;
+	u32 size = sizeof(config);
+
+	memset(&config, 0, size);
+	config.hdr.size = size;
+	config.hdr.cmd = SOF_IPC_GLB_DAI_MSG | SOF_IPC_DAI_CONFIG;
+	config.type = SOF_DAI_INTEL_ALH;
+	config.dai_index = (link_id << 8) | d->id;
+	config.alh.stream_id = 0xFFFF; /* invalid value on purpose */
+
+	/* send message to DSP */
+	ret = sof_ipc_tx_message(sdev->ipc,
+				 config.hdr.cmd, &config, size, &reply,
+				 sizeof(reply));
+	if (ret < 0) {
+		dev_err(sdev->dev,
+			"error: failed to free stream for link %d dai->id %d\n",
+			link_id, d->id);
+	}
+
+	return ret;
+}
+
+static const struct sdw_intel_ops sdw_callback = {
+	.params_stream = sdw_params_stream,
+	.free_stream = sdw_free_stream,
+};
+
+void hda_sdw_int_enable(struct snd_sof_dev *sdev, bool enable)
+{
+	sdw_intel_enable_irq(sdev->bar[HDA_DSP_BAR], enable);
+}
+
+static int hda_sdw_acpi_scan(struct snd_sof_dev *sdev)
+{
+	struct sof_intel_hda_dev *hdev;
+	acpi_handle handle;
+	int ret;
+
+	handle = ACPI_HANDLE(sdev->dev);
+
+	/* save ACPI info for the probe step */
+	hdev = sdev->pdata->hw_pdata;
+
+	ret = sdw_intel_acpi_scan(handle, &hdev->info);
+	if (ret < 0) {
+		dev_err(sdev->dev, "%s failed\n", __func__);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int hda_sdw_probe(struct snd_sof_dev *sdev)
+{
+	struct sof_intel_hda_dev *hdev;
+	struct sdw_intel_res res;
+	void *sdw;
+
+	hdev = sdev->pdata->hw_pdata;
+
+	memset(&res, 0, sizeof(res));
+
+	res.mmio_base = sdev->bar[HDA_DSP_BAR];
+	res.irq = sdev->ipc_irq;
+	res.handle = hdev->info.handle;
+	res.parent = sdev->dev;
+	res.ops = &sdw_callback;
+	res.dev = sdev->dev;
+	res.clock_stop_quirks = sdw_clock_stop_quirks;
+
+	/*
+	 * ops and arg fields are not populated for now,
+	 * they will be needed when the DAI callbacks are
+	 * provided
+	 */
+
+	/* we could filter links here if needed, e.g for quirks */
+	res.count = hdev->info.count;
+	res.link_mask = hdev->info.link_mask;
+
+	sdw = sdw_intel_probe(&res);
+	if (!sdw) {
+		dev_err(sdev->dev, "error: SoundWire probe failed\n");
+		return -EINVAL;
+	}
+
+	/* save context */
+	hdev->sdw = sdw;
+
+	return 0;
+}
+
+int hda_sdw_startup(struct snd_sof_dev *sdev)
+{
+	struct sof_intel_hda_dev *hdev;
+
+	hdev = sdev->pdata->hw_pdata;
+
+	if (!hdev->sdw)
+		return 0;
+
+	return sdw_intel_startup(hdev->sdw);
+}
+
+static int hda_sdw_exit(struct snd_sof_dev *sdev)
+{
+	struct sof_intel_hda_dev *hdev;
+
+	hdev = sdev->pdata->hw_pdata;
+
+	hda_sdw_int_enable(sdev, false);
+
+	if (hdev->sdw)
+		sdw_intel_exit(hdev->sdw);
+	hdev->sdw = NULL;
+
+	return 0;
+}
+
+static bool hda_dsp_check_sdw_irq(struct snd_sof_dev *sdev)
+{
+	struct sof_intel_hda_dev *hdev;
+	bool ret = false;
+	u32 irq_status;
+
+	hdev = sdev->pdata->hw_pdata;
+
+	if (!hdev->sdw)
+		return ret;
+
+	/* store status */
+	irq_status = snd_sof_dsp_read(sdev, HDA_DSP_BAR, HDA_DSP_REG_ADSPIS2);
+
+	/* invalid message ? */
+	if (irq_status == 0xffffffff)
+		goto out;
+
+	/* SDW message ? */
+	if (irq_status & HDA_DSP_REG_ADSPIS2_SNDW)
+		ret = true;
+
+out:
+	return ret;
+}
+
+static irqreturn_t hda_dsp_sdw_thread(int irq, void *context)
+{
+	return sdw_intel_thread(irq, context);
+}
+
+static bool hda_sdw_check_wakeen_irq(struct snd_sof_dev *sdev)
+{
+	struct sof_intel_hda_dev *hdev;
+
+	hdev = sdev->pdata->hw_pdata;
+	if (hdev->sdw &&
+	    snd_sof_dsp_read(sdev, HDA_DSP_BAR,
+			     HDA_DSP_REG_SNDW_WAKE_STS))
+		return true;
+
+	return false;
+}
+
+void hda_sdw_process_wakeen(struct snd_sof_dev *sdev)
+{
+	struct sof_intel_hda_dev *hdev;
+
+	hdev = sdev->pdata->hw_pdata;
+	if (!hdev->sdw)
+		return;
+
+	sdw_intel_process_wakeen_event(hdev->sdw);
+}
+
+#endif
+
 /*
  * Debug
  */
@@ -54,8 +287,7 @@ static int hda_dmic_num = -1;
 module_param_named(dmic_num, hda_dmic_num, int, 0444);
 MODULE_PARM_DESC(dmic_num, "SOF HDA DMIC number");
 
-static bool hda_codec_use_common_hdmi =
-	IS_ENABLED(CONFIG_SND_SOC_SOF_HDA_COMMON_HDMI_CODEC);
+static bool hda_codec_use_common_hdmi = IS_ENABLED(CONFIG_SND_HDA_CODEC_HDMI);
 module_param_named(use_common_hdmi, hda_codec_use_common_hdmi, bool, 0444);
 MODULE_PARM_DESC(use_common_hdmi, "SOF HDA use common HDMI codec driver");
 #endif
@@ -288,10 +520,8 @@ static int hda_init(struct snd_sof_dev *sdev)
 
 	/* init i915 and HDMI codecs */
 	ret = hda_codec_i915_init(sdev);
-	if (ret < 0) {
-		dev_err(sdev->dev, "error: init i915 and HDMI codec failed\n");
-		return ret;
-	}
+	if (ret < 0)
+		dev_warn(sdev->dev, "init of i915 and HDMI codec failed\n");
 
 	/* get controller capabilities */
 	ret = hda_dsp_ctrl_get_caps(sdev);
@@ -349,9 +579,12 @@ static const char *fixup_tplg_name(struct snd_sof_dev *sdev,
 static int hda_init_caps(struct snd_sof_dev *sdev)
 {
 	struct hdac_bus *bus = sof_to_bus(sdev);
+	struct snd_sof_pdata *pdata = sdev->pdata;
 #if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA)
 	struct hdac_ext_link *hlink;
 #endif
+	struct sof_intel_hda_dev *hdev = pdata->hw_pdata;
+	u32 link_mask;
 	int ret = 0;
 
 	device_disable_async_suspend(bus->dev);
@@ -365,12 +598,37 @@ static int hda_init_caps(struct snd_sof_dev *sdev)
 	if (ret < 0) {
 		dev_err(bus->dev, "error: init chip failed with ret: %d\n",
 			ret);
-#if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA)
-		hda_codec_i915_exit(sdev);
-#endif
 		return ret;
 	}
 
+	/* scan SoundWire capabilities exposed by DSDT */
+	ret = hda_sdw_acpi_scan(sdev);
+	if (ret < 0) {
+		dev_dbg(sdev->dev, "skipping SoundWire, ACPI scan error\n");
+		goto skip_soundwire;
+	}
+
+	link_mask = hdev->info.link_mask;
+	if (!link_mask) {
+		dev_dbg(sdev->dev, "skipping SoundWire, no links enabled\n");
+		goto skip_soundwire;
+	}
+
+	/*
+	 * probe/allocate SoundWire resources.
+	 * The hardware configuration takes place in hda_sdw_startup
+	 * after power rails are enabled.
+	 * It's entirely possible to have a mix of I2S/DMIC/SoundWire
+	 * devices, so we allocate the resources in all cases.
+	 */
+	ret = hda_sdw_probe(sdev);
+	if (ret < 0) {
+		dev_err(sdev->dev, "error: SoundWire probe error\n");
+		return ret;
+	}
+
+skip_soundwire:
+
 #if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA)
 	if (bus->mlcap)
 		snd_hdac_ext_bus_get_ml_capabilities(bus);
@@ -379,7 +637,7 @@ static int hda_init_caps(struct snd_sof_dev *sdev)
 	hda_codec_probe_bus(sdev, hda_codec_use_common_hdmi);
 
 	if (!HDA_IDISP_CODEC(bus->codec_mask))
-		hda_codec_i915_exit(sdev);
+		hda_codec_i915_display_power(sdev, false);
 
 	/*
 	 * we are done probing so decrement link counts
@@ -427,6 +685,7 @@ static irqreturn_t hda_dsp_interrupt_handler(int irq, void *context)
 static irqreturn_t hda_dsp_interrupt_thread(int irq, void *context)
 {
 	struct snd_sof_dev *sdev = context;
+	struct sof_intel_hda_dev *hdev = sdev->pdata->hw_pdata;
 
 	/* deal with streams and controller first */
 	if (hda_dsp_check_stream_irq(sdev))
@@ -435,6 +694,12 @@ static irqreturn_t hda_dsp_interrupt_thread(int irq, void *context)
 	if (hda_dsp_check_ipc_irq(sdev))
 		sof_ops(sdev)->irq_thread(irq, sdev);
 
+	if (hda_dsp_check_sdw_irq(sdev))
+		hda_dsp_sdw_thread(irq, hdev->sdw);
+
+	if (hda_sdw_check_wakeen_irq(sdev))
+		hda_sdw_process_wakeen(sdev);
+
 	/* enable GIE interrupt */
 	snd_sof_dsp_update_bits(sdev, HDA_DSP_HDA_BAR,
 				SOF_HDA_INTCTL,
@@ -590,12 +855,11 @@ int hda_dsp_probe(struct snd_sof_dev *sdev)
 	hda_dsp_ctrl_ppcap_enable(sdev, true);
 	hda_dsp_ctrl_ppcap_int_enable(sdev, true);
 
-	/* initialize waitq for code loading */
-	init_waitqueue_head(&sdev->waitq);
-
 	/* set default mailbox offset for FW ready message */
 	sdev->dsp_box.offset = HDA_DSP_MBOX_UPLINK_OFFSET;
 
+	INIT_DELAYED_WORK(&hdev->d0i3_work, hda_dsp_d0i3_work);
+
 	return 0;
 
 free_ipc_irq:
@@ -621,11 +885,16 @@ int hda_dsp_remove(struct snd_sof_dev *sdev)
 	struct pci_dev *pci = to_pci_dev(sdev->dev);
 	const struct sof_intel_dsp_desc *chip = hda->desc;
 
+	/* cancel any attempt for DSP D0I3 */
+	cancel_delayed_work_sync(&hda->d0i3_work);
+
 #if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA)
 	/* codec removal, invoke bus_device_remove */
 	snd_hdac_ext_bus_device_remove(bus);
 #endif
 
+	hda_sdw_exit(sdev);
+
 	if (!IS_ERR_OR_NULL(hda->dmic_dev))
 		platform_device_unregister(hda->dmic_dev);
 
@@ -694,12 +963,11 @@ static int hda_generic_machine_select(struct snd_sof_dev *sdev)
 		/*
 		 * If no machine driver is found, then:
 		 *
-		 * hda machine driver is used if :
-		 * 1. there is one HDMI codec and one external HDAudio codec
-		 * 2. only HDMI codec
+		 * generic hda machine driver can handle:
+		 *  - one HDMI codec, and/or
+		 *  - one external HDAudio codec
 		 */
-		if (!pdata->machine && codec_num <= 2 &&
-		    HDA_IDISP_CODEC(bus->codec_mask)) {
+		if (!pdata->machine && codec_num <= 2) {
 			hda_mach = snd_soc_acpi_intel_hda_machines;
 
 			/* topology: use the info from hda_machines */
@@ -709,7 +977,7 @@ static int hda_generic_machine_select(struct snd_sof_dev *sdev)
 			dev_info(bus->dev, "using HDA machine driver %s now\n",
 				 hda_mach->drv_name);
 
-			if (codec_num == 1)
+			if (codec_num == 1 && HDA_IDISP_CODEC(bus->codec_mask))
 				idisp_str = "-idisp";
 			else
 				idisp_str = "";
@@ -763,6 +1031,123 @@ static int hda_generic_machine_select(struct snd_sof_dev *sdev)
 }
 #endif
 
+#if IS_ENABLED(CONFIG_SND_SOC_SOF_INTEL_SOUNDWIRE)
+/* Check if all Slaves defined on the link can be found */
+static bool link_slaves_found(struct snd_sof_dev *sdev,
+			      const struct snd_soc_acpi_link_adr *link,
+			      struct sdw_intel_ctx *sdw)
+{
+	struct hdac_bus *bus = sof_to_bus(sdev);
+	struct sdw_intel_slave_id *ids = sdw->ids;
+	int num_slaves = sdw->num_slaves;
+	unsigned int part_id, link_id, unique_id, mfg_id;
+	int i, j;
+
+	for (i = 0; i < link->num_adr; i++) {
+		u64 adr = link->adr_d[i].adr;
+
+		mfg_id = SDW_MFG_ID(adr);
+		part_id = SDW_PART_ID(adr);
+		link_id = SDW_DISCO_LINK_ID(adr);
+		for (j = 0; j < num_slaves; j++) {
+			if (ids[j].link_id != link_id ||
+			    ids[j].id.part_id != part_id ||
+			    ids[j].id.mfg_id != mfg_id)
+				continue;
+			/*
+			 * we have to check unique id
+			 * if there is more than one
+			 * Slave on the link
+			 */
+			unique_id = SDW_UNIQUE_ID(adr);
+			if (link->num_adr == 1 ||
+			    ids[j].id.unique_id == SDW_IGNORED_UNIQUE_ID ||
+			    ids[j].id.unique_id == unique_id) {
+				dev_dbg(bus->dev,
+					"found %x at link %d\n",
+					part_id, link_id);
+				break;
+			}
+		}
+		if (j == num_slaves) {
+			dev_dbg(bus->dev,
+				"Slave %x not found\n",
+				part_id);
+			return false;
+		}
+	}
+	return true;
+}
+
+static int hda_sdw_machine_select(struct snd_sof_dev *sdev)
+{
+	struct snd_sof_pdata *pdata = sdev->pdata;
+	const struct snd_soc_acpi_link_adr *link;
+	struct hdac_bus *bus = sof_to_bus(sdev);
+	struct snd_soc_acpi_mach *mach;
+	struct sof_intel_hda_dev *hdev;
+	u32 link_mask;
+	int i;
+
+	hdev = pdata->hw_pdata;
+	link_mask = hdev->info.link_mask;
+
+	/*
+	 * Select SoundWire machine driver if needed using the
+	 * alternate tables. This case deals with SoundWire-only
+	 * machines, for mixed cases with I2C/I2S the detection relies
+	 * on the HID list.
+	 */
+	if (link_mask && !pdata->machine) {
+		for (mach = pdata->desc->alt_machines;
+		     mach && mach->link_mask; mach++) {
+			if (mach->link_mask != link_mask)
+				continue;
+
+			/* No need to match adr if there is no links defined */
+			if (!mach->links)
+				break;
+
+			link = mach->links;
+			for (i = 0; i < hdev->info.count && link->num_adr;
+			     i++, link++) {
+				/*
+				 * Try next machine if any expected Slaves
+				 * are not found on this link.
+				 */
+				if (!link_slaves_found(sdev, link, hdev->sdw))
+					break;
+			}
+			/* Found if all Slaves are checked */
+			if (i == hdev->info.count || !link->num_adr)
+				break;
+		}
+		if (mach && mach->link_mask) {
+			dev_dbg(bus->dev,
+				"SoundWire machine driver %s topology %s\n",
+				mach->drv_name,
+				mach->sof_tplg_filename);
+			pdata->machine = mach;
+			mach->mach_params.links = mach->links;
+			mach->mach_params.link_mask = mach->link_mask;
+			mach->mach_params.platform = dev_name(sdev->dev);
+			pdata->fw_filename = mach->sof_fw_filename;
+			pdata->tplg_filename = mach->sof_tplg_filename;
+		} else {
+			dev_info(sdev->dev,
+				 "No SoundWire machine driver found\n");
+		}
+	}
+
+	return 0;
+}
+#else
+static int hda_sdw_machine_select(struct snd_sof_dev *sdev)
+{
+	return 0;
+}
+#endif
+
 void hda_set_mach_params(const struct snd_soc_acpi_mach *mach,
 			 struct device *dev)
 {
@@ -782,9 +1167,19 @@ void hda_machine_select(struct snd_sof_dev *sdev)
 	if (mach) {
 		sof_pdata->tplg_filename = mach->sof_tplg_filename;
 		sof_pdata->machine = mach;
+
+		if (mach->link_mask) {
+			mach->mach_params.links = mach->links;
+			mach->mach_params.link_mask = mach->link_mask;
+		}
 	}
 
 	/*
+	 * If I2S fails, try SoundWire
+	 */
+	hda_sdw_machine_select(sdev);
+
+	/*
 	 * Choose HDA generic machine driver if mach is NULL.
 	 * Otherwise, set certain mach params.
 	 */
diff --git a/sound/soc/sof/intel/hda.h b/sound/soc/sof/intel/hda.h
index 6191d91..e982579 100644
--- a/sound/soc/sof/intel/hda.h
+++ b/sound/soc/sof/intel/hda.h
@@ -11,6 +11,9 @@
 #ifndef __SOF_INTEL_HDA_H
 #define __SOF_INTEL_HDA_H
 
+#include <linux/soundwire/sdw.h>
+#include <linux/soundwire/sdw_intel.h>
+#include <sound/compress_driver.h>
 #include <sound/hda_codec.h>
 #include <sound/hdaudio_ext.h>
 #include "shim.h"
@@ -174,7 +177,6 @@
  * value cannot be read back within the specified time.
  */
 #define HDA_DSP_STREAM_RUN_TIMEOUT		300
-#define HDA_DSP_CL_TRIGGER_TIMEOUT		300
 
 #define HDA_DSP_SPIB_ENABLE			1
 #define HDA_DSP_SPIB_DISABLE			0
@@ -230,6 +232,9 @@
 #define HDA_DSP_REG_ADSPIC2		(HDA_DSP_GEN_BASE + 0x10)
 #define HDA_DSP_REG_ADSPIS2		(HDA_DSP_GEN_BASE + 0x14)
 
+#define HDA_DSP_REG_ADSPIS2_SNDW	BIT(5)
+#define HDA_DSP_REG_SNDW_WAKE_STS      0x2C192
+
 /* Intel HD Audio Inter-Processor Communication Registers */
 #define HDA_DSP_IPC_BASE		0x40
 #define HDA_DSP_REG_HIPCT		(HDA_DSP_IPC_BASE + 0x00)
@@ -348,7 +353,13 @@
 
 /* Number of DAIs */
 #if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA)
+
+#if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA_PROBES)
+#define SOF_SKL_NUM_DAIS		16
+#else
 #define SOF_SKL_NUM_DAIS		15
+#endif
+
 #else
 #define SOF_SKL_NUM_DAIS		8
 #endif
@@ -392,6 +403,19 @@ struct sof_intel_dsp_bdl {
 #define SOF_HDA_PLAYBACK		0
 #define SOF_HDA_CAPTURE			1
 
+/*
+ * Time in ms for opportunistic D0I3 entry delay.
+ * This has been deliberately chosen to be long to avoid race conditions.
+ * Could be optimized in future.
+ */
+#define SOF_HDA_D0I3_WORK_DELAY_MS	5000
+
+/* HDA DSP D0 substate */
+enum sof_hda_D0_substate {
+	SOF_HDA_DSP_PM_D0I0,	/* default D0 substate */
+	SOF_HDA_DSP_PM_D0I3,	/* low power D0 substate */
+};
+
 /* represents DSP HDA controller frontend - i.e. host facing control */
 struct sof_intel_hda_dev {
 
@@ -414,6 +438,15 @@ struct sof_intel_hda_dev {
 
 	/* DMIC device */
 	struct platform_device *dmic_dev;
+
+	/* delayed work to enter D0I3 opportunistically */
+	struct delayed_work d0i3_work;
+
+	/* ACPI information stored between scan and probe steps */
+	struct sdw_intel_acpi_info info;
+
+	/* sdw context allocated by SoundWire driver */
+	struct sdw_intel_ctx *sdw;
 };
 
 static inline struct hdac_bus *sof_to_bus(struct snd_sof_dev *s)
@@ -469,9 +502,9 @@ void hda_dsp_ipc_int_enable(struct snd_sof_dev *sdev);
 void hda_dsp_ipc_int_disable(struct snd_sof_dev *sdev);
 
 int hda_dsp_set_power_state(struct snd_sof_dev *sdev,
-			    enum sof_d0_substate d0_substate);
+			    const struct sof_dsp_power_state *target_state);
 
-int hda_dsp_suspend(struct snd_sof_dev *sdev);
+int hda_dsp_suspend(struct snd_sof_dev *sdev, u32 target_state);
 int hda_dsp_resume(struct snd_sof_dev *sdev);
 int hda_dsp_runtime_suspend(struct snd_sof_dev *sdev);
 int hda_dsp_runtime_resume(struct snd_sof_dev *sdev);
@@ -481,10 +514,13 @@ void hda_dsp_dump_skl(struct snd_sof_dev *sdev, u32 flags);
 void hda_dsp_dump(struct snd_sof_dev *sdev, u32 flags);
 void hda_ipc_dump(struct snd_sof_dev *sdev);
 void hda_ipc_irq_dump(struct snd_sof_dev *sdev);
+void hda_dsp_d0i3_work(struct work_struct *work);
 
 /*
  * DSP PCM Operations.
  */
+u32 hda_dsp_get_mult_div(struct snd_sof_dev *sdev, int rate);
+u32 hda_dsp_get_bits(struct snd_sof_dev *sdev, int sample_bits);
 int hda_dsp_pcm_open(struct snd_sof_dev *sdev,
 		     struct snd_pcm_substream *substream);
 int hda_dsp_pcm_close(struct snd_sof_dev *sdev,
@@ -533,6 +569,29 @@ int hda_ipc_pcm_params(struct snd_sof_dev *sdev,
 		       struct snd_pcm_substream *substream,
 		       const struct sof_ipc_pcm_params_reply *reply);
 
+#if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA_PROBES)
+/*
+ * Probe Compress Operations.
+ */
+int hda_probe_compr_assign(struct snd_sof_dev *sdev,
+			   struct snd_compr_stream *cstream,
+			   struct snd_soc_dai *dai);
+int hda_probe_compr_free(struct snd_sof_dev *sdev,
+			 struct snd_compr_stream *cstream,
+			 struct snd_soc_dai *dai);
+int hda_probe_compr_set_params(struct snd_sof_dev *sdev,
+			       struct snd_compr_stream *cstream,
+			       struct snd_compr_params *params,
+			       struct snd_soc_dai *dai);
+int hda_probe_compr_trigger(struct snd_sof_dev *sdev,
+			    struct snd_compr_stream *cstream, int cmd,
+			    struct snd_soc_dai *dai);
+int hda_probe_compr_pointer(struct snd_sof_dev *sdev,
+			    struct snd_compr_stream *cstream,
+			    struct snd_compr_tstamp *tstamp,
+			    struct snd_soc_dai *dai);
+#endif
+
 /*
  * DSP IPC Operations.
  */
@@ -606,6 +665,61 @@ int hda_dsp_trace_init(struct snd_sof_dev *sdev, u32 *stream_tag);
 int hda_dsp_trace_release(struct snd_sof_dev *sdev);
 int hda_dsp_trace_trigger(struct snd_sof_dev *sdev, int cmd);
 
+/*
+ * SoundWire support
+ */
+#if IS_ENABLED(CONFIG_SND_SOC_SOF_INTEL_SOUNDWIRE)
+
+int hda_sdw_startup(struct snd_sof_dev *sdev);
+void hda_sdw_int_enable(struct snd_sof_dev *sdev, bool enable);
+void hda_sdw_process_wakeen(struct snd_sof_dev *sdev);
+
+#else
+
+static inline int hda_sdw_acpi_scan(struct snd_sof_dev *sdev)
+{
+	return 0;
+}
+
+static inline int hda_sdw_probe(struct snd_sof_dev *sdev)
+{
+	return 0;
+}
+
+static inline int hda_sdw_startup(struct snd_sof_dev *sdev)
+{
+	return 0;
+}
+
+static inline int hda_sdw_exit(struct snd_sof_dev *sdev)
+{
+	return 0;
+}
+
+static inline void hda_sdw_int_enable(struct snd_sof_dev *sdev, bool enable)
+{
+}
+
+static inline bool hda_dsp_check_sdw_irq(struct snd_sof_dev *sdev)
+{
+	return false;
+}
+
+static inline irqreturn_t hda_dsp_sdw_thread(int irq, void *context)
+{
+	return IRQ_HANDLED;
+}
+
+static inline bool hda_sdw_check_wakeen_irq(struct snd_sof_dev *sdev)
+{
+	return false;
+}
+
+static inline void hda_sdw_process_wakeen(struct snd_sof_dev *sdev)
+{
+}
+#endif
+
 /* common dai driver */
 extern struct snd_soc_dai_driver skl_dai[];
 
diff --git a/sound/soc/sof/ipc.c b/sound/soc/sof/ipc.c
index 78aa1da..1c67949 100644
--- a/sound/soc/sof/ipc.c
+++ b/sound/soc/sof/ipc.c
@@ -214,15 +214,17 @@ static int tx_wait_done(struct snd_sof_ipc *ipc, struct snd_sof_ipc_msg *msg,
 		snd_sof_handle_fw_exception(ipc->sdev);
 		ret = -ETIMEDOUT;
 	} else {
-		/* copy the data returned from DSP */
 		ret = msg->reply_error;
-		if (msg->reply_size)
-			memcpy(reply_data, msg->reply_data, msg->reply_size);
-		if (ret < 0)
+		if (ret < 0) {
 			dev_err(sdev->dev, "error: ipc error for 0x%x size %zu\n",
 				hdr->cmd, msg->reply_size);
-		else
+		} else {
 			ipc_log_header(sdev->dev, "ipc tx succeeded", hdr->cmd);
+			if (msg->reply_size)
+				/* copy the data returned from DSP */
+				memcpy(reply_data, msg->reply_data,
+				       msg->reply_size);
+		}
 	}
 
 	return ret;
@@ -268,7 +270,6 @@ static int sof_ipc_tx_message_unlocked(struct snd_sof_ipc *ipc, u32 header,
 	spin_unlock_irq(&sdev->ipc_lock);
 
 	if (ret < 0) {
-		/* So far IPC TX never fails, consider making the above void */
 		dev_err_ratelimited(sdev->dev,
 				    "error: ipc tx failed with error %d\n",
 				    ret);
@@ -289,6 +290,32 @@ int sof_ipc_tx_message(struct snd_sof_ipc *ipc, u32 header,
 		       void *msg_data, size_t msg_bytes, void *reply_data,
 		       size_t reply_bytes)
 {
+	const struct sof_dsp_power_state target_state = {
+		.state = SOF_DSP_PM_D0,
+	};
+	int ret;
+
+	/* ensure the DSP is in D0 before sending a new IPC */
+	ret = snd_sof_dsp_set_power_state(ipc->sdev, &target_state);
+	if (ret < 0) {
+		dev_err(ipc->sdev->dev, "error: resuming DSP %d\n", ret);
+		return ret;
+	}
+
+	return sof_ipc_tx_message_no_pm(ipc, header, msg_data, msg_bytes,
+					reply_data, reply_bytes);
+}
+EXPORT_SYMBOL(sof_ipc_tx_message);
+
+/*
+ * send IPC message from host to DSP without modifying the DSP state.
+ * This will be used for IPC's that can be handled by the DSP
+ * even in a low-power D0 substate.
+ */
+int sof_ipc_tx_message_no_pm(struct snd_sof_ipc *ipc, u32 header,
+			     void *msg_data, size_t msg_bytes,
+			     void *reply_data, size_t reply_bytes)
+{
 	int ret;
 
 	if (msg_bytes > SOF_IPC_MSG_MAX_SIZE ||
@@ -305,7 +332,7 @@ int sof_ipc_tx_message(struct snd_sof_ipc *ipc, u32 header,
 
 	return ret;
 }
-EXPORT_SYMBOL(sof_ipc_tx_message);
+EXPORT_SYMBOL(sof_ipc_tx_message_no_pm);
 
 /* handle reply message from DSP */
 int snd_sof_ipc_reply(struct snd_sof_dev *sdev, u32 msg_id)
diff --git a/sound/soc/sof/loader.c b/sound/soc/sof/loader.c
index fc4ab51..64af082 100644
--- a/sound/soc/sof/loader.c
+++ b/sound/soc/sof/loader.c
@@ -95,9 +95,6 @@ int snd_sof_fw_parse_ext_data(struct snd_sof_dev *sdev, u32 bar, u32 offset)
 
 		/* process structure data */
 		switch (ext_hdr->type) {
-		case SOF_IPC_EXT_DMA_BUFFER:
-			ret = 0;
-			break;
 		case SOF_IPC_EXT_WINDOW:
 			ret = get_ext_windows(sdev, ext_hdr);
 			break;
@@ -469,9 +466,6 @@ int snd_sof_load_firmware_raw(struct snd_sof_dev *sdev)
 	const char *fw_filename;
 	int ret;
 
-	/* set code loading condition to true */
-	sdev->code_loading = 1;
-
 	/* Don't request firmware again if firmware is already requested */
 	if (plat_data->fw)
 		return 0;
@@ -603,7 +597,7 @@ int snd_sof_run_firmware(struct snd_sof_dev *sdev)
 	}
 
 	if (sdev->fw_state == SOF_FW_BOOT_COMPLETE)
-		dev_info(sdev->dev, "firmware boot complete\n");
+		dev_dbg(sdev->dev, "firmware boot complete\n");
 	else
 		return -EIO; /* FW boots but fw_ready op failed */
 
diff --git a/sound/soc/sof/ops.h b/sound/soc/sof/ops.h
index e929a6e..a771500 100644
--- a/sound/soc/sof/ops.h
+++ b/sound/soc/sof/ops.h
@@ -146,10 +146,11 @@ static inline int snd_sof_dsp_resume(struct snd_sof_dev *sdev)
 	return 0;
 }
 
-static inline int snd_sof_dsp_suspend(struct snd_sof_dev *sdev)
+static inline int snd_sof_dsp_suspend(struct snd_sof_dev *sdev,
+				      u32 target_state)
 {
 	if (sof_ops(sdev)->suspend)
-		return sof_ops(sdev)->suspend(sdev);
+		return sof_ops(sdev)->suspend(sdev, target_state);
 
 	return 0;
 }
@@ -193,14 +194,15 @@ static inline int snd_sof_dsp_set_clk(struct snd_sof_dev *sdev, u32 freq)
 	return 0;
 }
 
-static inline int snd_sof_dsp_set_power_state(struct snd_sof_dev *sdev,
-					      enum sof_d0_substate substate)
+static inline int
+snd_sof_dsp_set_power_state(struct snd_sof_dev *sdev,
+			    const struct sof_dsp_power_state *target_state)
 {
 	if (sof_ops(sdev)->set_power_state)
-		return sof_ops(sdev)->set_power_state(sdev, substate);
+		return sof_ops(sdev)->set_power_state(sdev, target_state);
 
-	/* D0 substate is not supported */
-	return -ENOTSUPP;
+	/* D0 substate is not supported, do nothing here. */
+	return 0;
 }
 
 /* debug */
@@ -391,6 +393,49 @@ snd_sof_pcm_platform_pointer(struct snd_sof_dev *sdev,
 	return 0;
 }
 
+#if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_PROBES)
+static inline int
+snd_sof_probe_compr_assign(struct snd_sof_dev *sdev,
+		struct snd_compr_stream *cstream, struct snd_soc_dai *dai)
+{
+	return sof_ops(sdev)->probe_assign(sdev, cstream, dai);
+}
+
+static inline int
+snd_sof_probe_compr_free(struct snd_sof_dev *sdev,
+		struct snd_compr_stream *cstream, struct snd_soc_dai *dai)
+{
+	return sof_ops(sdev)->probe_free(sdev, cstream, dai);
+}
+
+static inline int
+snd_sof_probe_compr_set_params(struct snd_sof_dev *sdev,
+		struct snd_compr_stream *cstream,
+		struct snd_compr_params *params, struct snd_soc_dai *dai)
+{
+	return sof_ops(sdev)->probe_set_params(sdev, cstream, params, dai);
+}
+
+static inline int
+snd_sof_probe_compr_trigger(struct snd_sof_dev *sdev,
+		struct snd_compr_stream *cstream, int cmd,
+		struct snd_soc_dai *dai)
+{
+	return sof_ops(sdev)->probe_trigger(sdev, cstream, cmd, dai);
+}
+
+static inline int
+snd_sof_probe_compr_pointer(struct snd_sof_dev *sdev,
+		struct snd_compr_stream *cstream,
+		struct snd_compr_tstamp *tstamp, struct snd_soc_dai *dai)
+{
+	if (sof_ops(sdev) && sof_ops(sdev)->probe_pointer)
+		return sof_ops(sdev)->probe_pointer(sdev, cstream, tstamp, dai);
+
+	return 0;
+}
+#endif
+
 /* machine driver */
 static inline int
 snd_sof_machine_register(struct snd_sof_dev *sdev, void *pdata)
diff --git a/sound/soc/sof/pcm.c b/sound/soc/sof/pcm.c
index 29435ba..47cd741 100644
--- a/sound/soc/sof/pcm.c
+++ b/sound/soc/sof/pcm.c
@@ -16,6 +16,9 @@
 #include "sof-priv.h"
 #include "sof-audio.h"
 #include "ops.h"
+#if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_PROBES)
+#include "compress.h"
+#endif
 
 /* Create DMA buffer page table for DSP */
 static int create_page_table(struct snd_soc_component *component,
@@ -54,7 +57,7 @@ static int sof_pcm_dsp_params(struct snd_sof_pcm *spcm, struct snd_pcm_substream
 /*
  * sof pcm period elapse work
  */
-static void sof_pcm_period_elapsed_work(struct work_struct *work)
+void snd_sof_pcm_period_elapsed_work(struct work_struct *work)
 {
 	struct snd_sof_pcm_stream *sps =
 		container_of(work, struct snd_sof_pcm_stream,
@@ -372,7 +375,7 @@ static int sof_pcm_trigger(struct snd_soc_component *component,
 		stream.hdr.cmd |= SOF_IPC_STREAM_TRIG_START;
 		break;
 	case SNDRV_PCM_TRIGGER_SUSPEND:
-		if (sdev->s0_suspend &&
+		if (sdev->system_suspend_target == SOF_SUSPEND_S0IX &&
 		    spcm->stream[substream->stream].d0i3_compatible) {
 			/*
 			 * trap the event, not sending trigger stop to
@@ -472,8 +475,6 @@ static int sof_pcm_open(struct snd_soc_component *component,
 	dev_dbg(component->dev, "pcm: open stream %d dir %d\n",
 		spcm->pcm.pcm_id, substream->stream);
 
-	INIT_WORK(&spcm->stream[substream->stream].period_elapsed_work,
-		  sof_pcm_period_elapsed_work);
 
 	caps = &spcm->pcm.caps[substream->stream];
 
@@ -598,8 +599,7 @@ static int sof_pcm_new(struct snd_soc_component *component,
 
 	snd_pcm_set_managed_buffer(pcm->streams[stream].substream,
 				   SNDRV_DMA_TYPE_DEV_SG, sdev->dev,
-				   le32_to_cpu(caps->buffer_size_min),
-				   le32_to_cpu(caps->buffer_size_max));
+				   0, le32_to_cpu(caps->buffer_size_max));
 capture:
 	stream = SNDRV_PCM_STREAM_CAPTURE;
 
@@ -621,8 +621,7 @@ static int sof_pcm_new(struct snd_soc_component *component,
 
 	snd_pcm_set_managed_buffer(pcm->streams[stream].substream,
 				   SNDRV_DMA_TYPE_DEV_SG, sdev->dev,
-				   le32_to_cpu(caps->buffer_size_min),
-				   le32_to_cpu(caps->buffer_size_max));
+				   0, le32_to_cpu(caps->buffer_size_max));
 
 	return 0;
 }
@@ -788,6 +787,10 @@ void snd_sof_new_platform_drv(struct snd_sof_dev *sdev)
 #if IS_ENABLED(CONFIG_SND_SOC_SOF_COMPRESS)
 	pd->compr_ops = &sof_compressed_ops;
 #endif
+#if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_PROBES)
+	/* override cops when probe support is enabled */
+	pd->compr_ops = &sof_probe_compressed_ops;
+#endif
 	pd->pcm_construct = sof_pcm_new;
 	pd->ignore_machine = drv_name;
 	pd->be_hw_params_fixup = sof_pcm_dai_link_fixup;
diff --git a/sound/soc/sof/pm.c b/sound/soc/sof/pm.c
index a0cde05..c410822 100644
--- a/sound/soc/sof/pm.c
+++ b/sound/soc/sof/pm.c
@@ -12,6 +12,42 @@
 #include "sof-priv.h"
 #include "sof-audio.h"
 
+/*
+ * Helper function to determine the target DSP state during
+ * system suspend. This function only cares about the device
+ * D-states. Platform-specific substates, if any, should be
+ * handled by the platform-specific parts.
+ */
+static u32 snd_sof_dsp_power_target(struct snd_sof_dev *sdev)
+{
+	u32 target_dsp_state;
+
+	switch (sdev->system_suspend_target) {
+	case SOF_SUSPEND_S3:
+		/* DSP should be in D3 if the system is suspending to S3 */
+		target_dsp_state = SOF_DSP_PM_D3;
+		break;
+	case SOF_SUSPEND_S0IX:
+		/*
+		 * Currently, the only criterion for retaining the DSP in D0
+		 * is that there are streams that ignored the suspend trigger.
+		 * Additional criteria such Soundwire clock-stop mode and
+		 * device suspend latency considerations will be added later.
+		 */
+		if (snd_sof_stream_suspend_ignored(sdev))
+			target_dsp_state = SOF_DSP_PM_D0;
+		else
+			target_dsp_state = SOF_DSP_PM_D3;
+		break;
+	default:
+		/* This case would be during runtime suspend */
+		target_dsp_state = SOF_DSP_PM_D3;
+		break;
+	}
+
+	return target_dsp_state;
+}
+
 static int sof_send_pm_ctx_ipc(struct snd_sof_dev *sdev, int cmd)
 {
 	struct sof_ipc_pm_ctx pm_ctx;
@@ -50,6 +86,7 @@ static void sof_cache_debugfs(struct snd_sof_dev *sdev)
 static int sof_resume(struct device *dev, bool runtime_resume)
 {
 	struct snd_sof_dev *sdev = dev_get_drvdata(dev);
+	u32 old_state = sdev->dsp_power_state.state;
 	int ret;
 
 	/* do nothing if dsp resume callbacks are not set */
@@ -74,6 +111,10 @@ static int sof_resume(struct device *dev, bool runtime_resume)
 		return ret;
 	}
 
+	/* Nothing further to do if resuming from a low-power D0 substate */
+	if (!runtime_resume && old_state == SOF_DSP_PM_D0)
+		return 0;
+
 	sdev->fw_state = SOF_FW_BOOT_PREPARE;
 
 	/* load the firmware */
@@ -124,15 +165,13 @@ static int sof_resume(struct device *dev, bool runtime_resume)
 			"error: ctx_restore ipc error during resume %d\n",
 			ret);
 
-	/* initialize default D0 sub-state */
-	sdev->d0_substate = SOF_DSP_D0I0;
-
 	return ret;
 }
 
 static int sof_suspend(struct device *dev, bool runtime_suspend)
 {
 	struct snd_sof_dev *sdev = dev_get_drvdata(dev);
+	u32 target_state = 0;
 	int ret;
 
 	/* do nothing if dsp suspend callback is not set */
@@ -140,10 +179,7 @@ static int sof_suspend(struct device *dev, bool runtime_suspend)
 		return 0;
 
 	if (sdev->fw_state != SOF_FW_BOOT_COMPLETE)
-		goto power_down;
-
-	/* release trace */
-	snd_sof_release_trace(sdev);
+		goto suspend;
 
 	/* set restore_stream for all streams during system suspend */
 	if (!runtime_suspend) {
@@ -156,6 +192,15 @@ static int sof_suspend(struct device *dev, bool runtime_suspend)
 		}
 	}
 
+	target_state = snd_sof_dsp_power_target(sdev);
+
+	/* Skip to platform-specific suspend if DSP is entering D0 */
+	if (target_state == SOF_DSP_PM_D0)
+		goto suspend;
+
+	/* release trace */
+	snd_sof_release_trace(sdev);
+
 #if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE)
 	/* cache debugfs contents during runtime suspend */
 	if (runtime_suspend)
@@ -179,22 +224,26 @@ static int sof_suspend(struct device *dev, bool runtime_suspend)
 			 ret);
 	}
 
-power_down:
+suspend:
 
 	/* return if the DSP was not probed successfully */
 	if (sdev->fw_state == SOF_FW_BOOT_NOT_STARTED)
 		return 0;
 
-	/* power down all DSP cores */
+	/* platform-specific suspend */
 	if (runtime_suspend)
 		ret = snd_sof_dsp_runtime_suspend(sdev);
 	else
-		ret = snd_sof_dsp_suspend(sdev);
+		ret = snd_sof_dsp_suspend(sdev, target_state);
 	if (ret < 0)
 		dev_err(sdev->dev,
 			"error: failed to power down DSP during suspend %d\n",
 			ret);
 
+	/* Do not reset FW state if DSP is in D0 */
+	if (target_state == SOF_DSP_PM_D0)
+		return ret;
+
 	/* reset FW state */
 	sdev->fw_state = SOF_FW_BOOT_NOT_STARTED;
 
@@ -221,112 +270,14 @@ int snd_sof_runtime_resume(struct device *dev)
 }
 EXPORT_SYMBOL(snd_sof_runtime_resume);
 
-int snd_sof_set_d0_substate(struct snd_sof_dev *sdev,
-			    enum sof_d0_substate d0_substate)
-{
-	int ret;
-
-	if (sdev->d0_substate == d0_substate)
-		return 0;
-
-	/* do platform specific set_state */
-	ret = snd_sof_dsp_set_power_state(sdev, d0_substate);
-	if (ret < 0)
-		return ret;
-
-	/* update dsp D0 sub-state */
-	sdev->d0_substate = d0_substate;
-
-	return 0;
-}
-EXPORT_SYMBOL(snd_sof_set_d0_substate);
-
-/*
- * Audio DSP states may transform as below:-
- *
- *                                         D0I3 compatible stream
- *     Runtime    +---------------------+   opened only, timeout
- *     suspend    |                     +--------------------+
- *   +------------+       D0(active)    |                    |
- *   |            |                     <---------------+    |
- *   |   +-------->                     |               |    |
- *   |   |Runtime +--^--+---------^--+--+ The last      |    |
- *   |   |resume     |  |         |  |    opened D0I3   |    |
- *   |   |           |  |         |  |    compatible    |    |
- *   |   |     resume|  |         |  |    stream closed |    |
- *   |   |      from |  | D3      |  |                  |    |
- *   |   |       D3  |  |suspend  |  | d0i3             |    |
- *   |   |           |  |         |  |suspend           |    |
- *   |   |           |  |         |  |                  |    |
- *   |   |           |  |         |  |                  |    |
- * +-v---+-----------+--v-------+ |  |           +------+----v----+
- * |                            | |  +----------->                |
- * |       D3 (suspended)       | |              |      D0I3      +-----+
- * |                            | +--------------+                |     |
- * |                            |  resume from   |                |     |
- * +-------------------^--------+  d0i3 suspend  +----------------+     |
- *                     |                                                |
- *                     |                       D3 suspend               |
- *                     +------------------------------------------------+
- *
- * d0i3_suspend = s0_suspend && D0I3 stream opened,
- * D3 suspend = !d0i3_suspend,
- */
-
 int snd_sof_resume(struct device *dev)
 {
-	struct snd_sof_dev *sdev = dev_get_drvdata(dev);
-	int ret;
-
-	if (snd_sof_dsp_d0i3_on_suspend(sdev)) {
-		/* resume from D0I3 */
-		dev_dbg(sdev->dev, "DSP will exit from D0i3...\n");
-		ret = snd_sof_set_d0_substate(sdev, SOF_DSP_D0I0);
-		if (ret == -ENOTSUPP) {
-			/* fallback to resume from D3 */
-			dev_dbg(sdev->dev, "D0i3 not supported, fall back to resume from D3...\n");
-			goto d3_resume;
-		} else if (ret < 0) {
-			dev_err(sdev->dev, "error: failed to exit from D0I3 %d\n",
-				ret);
-			return ret;
-		}
-
-		/* platform-specific resume from D0i3 */
-		return snd_sof_dsp_resume(sdev);
-	}
-
-d3_resume:
-	/* resume from D3 */
 	return sof_resume(dev, false);
 }
 EXPORT_SYMBOL(snd_sof_resume);
 
 int snd_sof_suspend(struct device *dev)
 {
-	struct snd_sof_dev *sdev = dev_get_drvdata(dev);
-	int ret;
-
-	if (snd_sof_dsp_d0i3_on_suspend(sdev)) {
-		/* suspend to D0i3 */
-		dev_dbg(sdev->dev, "DSP is trying to enter D0i3...\n");
-		ret = snd_sof_set_d0_substate(sdev, SOF_DSP_D0I3);
-		if (ret == -ENOTSUPP) {
-			/* fallback to D3 suspend */
-			dev_dbg(sdev->dev, "D0i3 not supported, fall back to D3...\n");
-			goto d3_suspend;
-		} else if (ret < 0) {
-			dev_err(sdev->dev, "error: failed to enter D0I3, %d\n",
-				ret);
-			return ret;
-		}
-
-		/* platform-specific suspend to D0i3 */
-		return snd_sof_dsp_suspend(sdev);
-	}
-
-d3_suspend:
-	/* suspend to D3 */
 	return sof_suspend(dev, false);
 }
 EXPORT_SYMBOL(snd_sof_suspend);
@@ -336,10 +287,13 @@ int snd_sof_prepare(struct device *dev)
 	struct snd_sof_dev *sdev = dev_get_drvdata(dev);
 
 #if defined(CONFIG_ACPI)
-	sdev->s0_suspend = acpi_target_system_state() == ACPI_STATE_S0;
+	if (acpi_target_system_state() == ACPI_STATE_S0)
+		sdev->system_suspend_target = SOF_SUSPEND_S0IX;
+	else
+		sdev->system_suspend_target = SOF_SUSPEND_S3;
 #else
 	/* will suspend to S3 by default */
-	sdev->s0_suspend = false;
+	sdev->system_suspend_target = SOF_SUSPEND_S3;
 #endif
 
 	return 0;
@@ -350,6 +304,6 @@ void snd_sof_complete(struct device *dev)
 {
 	struct snd_sof_dev *sdev = dev_get_drvdata(dev);
 
-	sdev->s0_suspend = false;
+	sdev->system_suspend_target = SOF_SUSPEND_NONE;
 }
 EXPORT_SYMBOL(snd_sof_complete);
diff --git a/sound/soc/sof/probe.c b/sound/soc/sof/probe.c
new file mode 100644
index 0000000..c38169f
--- /dev/null
+++ b/sound/soc/sof/probe.c
@@ -0,0 +1,290 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+//
+// This file is provided under a dual BSD/GPLv2 license.  When using or
+// redistributing this file, you may do so under either license.
+//
+// Copyright(c) 2019-2020 Intel Corporation. All rights reserved.
+//
+// Author: Cezary Rojewski <cezary.rojewski@intel.com>
+//
+
+#include "sof-priv.h"
+#include "probe.h"
+
+/**
+ * sof_ipc_probe_init - initialize data probing
+ * @sdev:		SOF sound device
+ * @stream_tag:		Extractor stream tag
+ * @buffer_size:	DMA buffer size to set for extractor
+ *
+ * Host chooses whether extraction is supported or not by providing
+ * valid stream tag to DSP. Once specified, stream described by that
+ * tag will be tied to DSP for extraction for the entire lifetime of
+ * probe.
+ *
+ * Probing is initialized only once and each INIT request must be
+ * matched by DEINIT call.
+ */
+int sof_ipc_probe_init(struct snd_sof_dev *sdev,
+		u32 stream_tag, size_t buffer_size)
+{
+	struct sof_ipc_probe_dma_add_params *msg;
+	struct sof_ipc_reply reply;
+	size_t size = struct_size(msg, dma, 1);
+	int ret;
+
+	msg = kmalloc(size, GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
+	msg->hdr.size = size;
+	msg->hdr.cmd = SOF_IPC_GLB_PROBE | SOF_IPC_PROBE_INIT;
+	msg->num_elems = 1;
+	msg->dma[0].stream_tag = stream_tag;
+	msg->dma[0].dma_buffer_size = buffer_size;
+
+	ret = sof_ipc_tx_message(sdev->ipc, msg->hdr.cmd, msg, msg->hdr.size,
+			&reply, sizeof(reply));
+	kfree(msg);
+	return ret;
+}
+EXPORT_SYMBOL(sof_ipc_probe_init);
+
+/**
+ * sof_ipc_probe_deinit - cleanup after data probing
+ * @sdev:	SOF sound device
+ *
+ * Host sends DEINIT request to free previously initialized probe
+ * on DSP side once it is no longer needed. DEINIT only when there
+ * are no probes connected and with all injectors detached.
+ */
+int sof_ipc_probe_deinit(struct snd_sof_dev *sdev)
+{
+	struct sof_ipc_cmd_hdr msg;
+	struct sof_ipc_reply reply;
+
+	msg.size = sizeof(msg);
+	msg.cmd = SOF_IPC_GLB_PROBE | SOF_IPC_PROBE_DEINIT;
+
+	return sof_ipc_tx_message(sdev->ipc, msg.cmd, &msg, msg.size,
+			&reply, sizeof(reply));
+}
+EXPORT_SYMBOL(sof_ipc_probe_deinit);
+
+static int sof_ipc_probe_info(struct snd_sof_dev *sdev, unsigned int cmd,
+		void **params, size_t *num_params)
+{
+	struct sof_ipc_probe_info_params msg = {{{0}}};
+	struct sof_ipc_probe_info_params *reply;
+	size_t bytes;
+	int ret;
+
+	*params = NULL;
+	*num_params = 0;
+
+	reply = kzalloc(SOF_IPC_MSG_MAX_SIZE, GFP_KERNEL);
+	if (!reply)
+		return -ENOMEM;
+	msg.rhdr.hdr.size = sizeof(msg);
+	msg.rhdr.hdr.cmd = SOF_IPC_GLB_PROBE | cmd;
+
+	ret = sof_ipc_tx_message(sdev->ipc, msg.rhdr.hdr.cmd, &msg,
+			msg.rhdr.hdr.size, reply, SOF_IPC_MSG_MAX_SIZE);
+	if (ret < 0 || reply->rhdr.error < 0)
+		goto exit;
+
+	if (!reply->num_elems)
+		goto exit;
+
+	if (cmd == SOF_IPC_PROBE_DMA_INFO)
+		bytes = sizeof(reply->dma[0]);
+	else
+		bytes = sizeof(reply->desc[0]);
+	bytes *= reply->num_elems;
+	*params = kmemdup(&reply->dma[0], bytes, GFP_KERNEL);
+	if (!*params) {
+		ret = -ENOMEM;
+		goto exit;
+	}
+	*num_params = reply->num_elems;
+
+exit:
+	kfree(reply);
+	return ret;
+}
+
+/**
+ * sof_ipc_probe_dma_info - retrieve list of active injection dmas
+ * @sdev:	SOF sound device
+ * @dma:	Returned list of active dmas
+ * @num_dma:	Returned count of active dmas
+ *
+ * Host sends DMA_INFO request to obtain list of injection dmas it
+ * can use to transfer data over with.
+ *
+ * Note that list contains only injection dmas as there is only one
+ * extractor (dma) and it is always assigned on probing init.
+ * DSP knows exactly where data from extraction probes is going to,
+ * which is not the case for injection where multiple streams
+ * could be engaged.
+ */
+int sof_ipc_probe_dma_info(struct snd_sof_dev *sdev,
+		struct sof_probe_dma **dma, size_t *num_dma)
+{
+	return sof_ipc_probe_info(sdev, SOF_IPC_PROBE_DMA_INFO,
+			(void **)dma, num_dma);
+}
+EXPORT_SYMBOL(sof_ipc_probe_dma_info);
+
+/**
+ * sof_ipc_probe_dma_add - attach to specified dmas
+ * @sdev:	SOF sound device
+ * @dma:	List of streams (dmas) to attach to
+ * @num_dma:	Number of elements in @dma
+ *
+ * Contrary to extraction, injection streams are never assigned
+ * on init. Before attempting any data injection, host is responsible
+ * for specifying streams which will be later used to transfer data
+ * to connected probe points.
+ */
+int sof_ipc_probe_dma_add(struct snd_sof_dev *sdev,
+		struct sof_probe_dma *dma, size_t num_dma)
+{
+	struct sof_ipc_probe_dma_add_params *msg;
+	struct sof_ipc_reply reply;
+	size_t size = struct_size(msg, dma, num_dma);
+	int ret;
+
+	msg = kmalloc(size, GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
+	msg->hdr.size = size;
+	msg->num_elems = num_dma;
+	msg->hdr.cmd = SOF_IPC_GLB_PROBE | SOF_IPC_PROBE_DMA_ADD;
+	memcpy(&msg->dma[0], dma, size - sizeof(*msg));
+
+	ret = sof_ipc_tx_message(sdev->ipc, msg->hdr.cmd, msg, msg->hdr.size,
+			&reply, sizeof(reply));
+	kfree(msg);
+	return ret;
+}
+EXPORT_SYMBOL(sof_ipc_probe_dma_add);
+
+/**
+ * sof_ipc_probe_dma_remove - detach from specified dmas
+ * @sdev:		SOF sound device
+ * @stream_tag:		List of stream tags to detach from
+ * @num_stream_tag:	Number of elements in @stream_tag
+ *
+ * Host sends DMA_REMOVE request to free previously attached stream
+ * from being occupied for injection. Each detach operation should
+ * match equivalent DMA_ADD. Detach only when all probes tied to
+ * given stream have been disconnected.
+ */
+int sof_ipc_probe_dma_remove(struct snd_sof_dev *sdev,
+		unsigned int *stream_tag, size_t num_stream_tag)
+{
+	struct sof_ipc_probe_dma_remove_params *msg;
+	struct sof_ipc_reply reply;
+	size_t size = struct_size(msg, stream_tag, num_stream_tag);
+	int ret;
+
+	msg = kmalloc(size, GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
+	msg->hdr.size = size;
+	msg->num_elems = num_stream_tag;
+	msg->hdr.cmd = SOF_IPC_GLB_PROBE | SOF_IPC_PROBE_DMA_REMOVE;
+	memcpy(&msg->stream_tag[0], stream_tag, size - sizeof(*msg));
+
+	ret = sof_ipc_tx_message(sdev->ipc, msg->hdr.cmd, msg, msg->hdr.size,
+			&reply, sizeof(reply));
+	kfree(msg);
+	return ret;
+}
+EXPORT_SYMBOL(sof_ipc_probe_dma_remove);
+
+/**
+ * sof_ipc_probe_points_info - retrieve list of active probe points
+ * @sdev:	SOF sound device
+ * @desc:	Returned list of active probes
+ * @num_desc:	Returned count of active probes
+ *
+ * Host sends PROBE_POINT_INFO request to obtain list of active probe
+ * points, valid for disconnection when given probe is no longer
+ * required.
+ */
+int sof_ipc_probe_points_info(struct snd_sof_dev *sdev,
+		struct sof_probe_point_desc **desc, size_t *num_desc)
+{
+	return sof_ipc_probe_info(sdev, SOF_IPC_PROBE_POINT_INFO,
+				 (void **)desc, num_desc);
+}
+EXPORT_SYMBOL(sof_ipc_probe_points_info);
+
+/**
+ * sof_ipc_probe_points_add - connect specified probes
+ * @sdev:	SOF sound device
+ * @desc:	List of probe points to connect
+ * @num_desc:	Number of elements in @desc
+ *
+ * Dynamically connects to provided set of endpoints. Immediately
+ * after connection is established, host must be prepared to
+ * transfer data from or to target stream given the probing purpose.
+ *
+ * Each probe point should be removed using PROBE_POINT_REMOVE
+ * request when no longer needed.
+ */
+int sof_ipc_probe_points_add(struct snd_sof_dev *sdev,
+		struct sof_probe_point_desc *desc, size_t num_desc)
+{
+	struct sof_ipc_probe_point_add_params *msg;
+	struct sof_ipc_reply reply;
+	size_t size = struct_size(msg, desc, num_desc);
+	int ret;
+
+	msg = kmalloc(size, GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
+	msg->hdr.size = size;
+	msg->num_elems = num_desc;
+	msg->hdr.cmd = SOF_IPC_GLB_PROBE | SOF_IPC_PROBE_POINT_ADD;
+	memcpy(&msg->desc[0], desc, size - sizeof(*msg));
+
+	ret = sof_ipc_tx_message(sdev->ipc, msg->hdr.cmd, msg, msg->hdr.size,
+			&reply, sizeof(reply));
+	kfree(msg);
+	return ret;
+}
+EXPORT_SYMBOL(sof_ipc_probe_points_add);
+
+/**
+ * sof_ipc_probe_points_remove - disconnect specified probes
+ * @sdev:		SOF sound device
+ * @buffer_id:		List of probe points to disconnect
+ * @num_buffer_id:	Number of elements in @desc
+ *
+ * Removes previously connected probes from list of active probe
+ * points and frees all resources on DSP side.
+ */
+int sof_ipc_probe_points_remove(struct snd_sof_dev *sdev,
+		unsigned int *buffer_id, size_t num_buffer_id)
+{
+	struct sof_ipc_probe_point_remove_params *msg;
+	struct sof_ipc_reply reply;
+	size_t size = struct_size(msg, buffer_id, num_buffer_id);
+	int ret;
+
+	msg = kmalloc(size, GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
+	msg->hdr.size = size;
+	msg->num_elems = num_buffer_id;
+	msg->hdr.cmd = SOF_IPC_GLB_PROBE | SOF_IPC_PROBE_POINT_REMOVE;
+	memcpy(&msg->buffer_id[0], buffer_id, size - sizeof(*msg));
+
+	ret = sof_ipc_tx_message(sdev->ipc, msg->hdr.cmd, msg, msg->hdr.size,
+			&reply, sizeof(reply));
+	kfree(msg);
+	return ret;
+}
+EXPORT_SYMBOL(sof_ipc_probe_points_remove);
diff --git a/sound/soc/sof/probe.h b/sound/soc/sof/probe.h
new file mode 100644
index 0000000..45daa55
--- /dev/null
+++ b/sound/soc/sof/probe.h
@@ -0,0 +1,85 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) */
+/*
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * Copyright(c) 2019-2020 Intel Corporation. All rights reserved.
+ *
+ * Author: Cezary Rojewski <cezary.rojewski@intel.com>
+ */
+
+#ifndef __SOF_PROBE_H
+#define __SOF_PROBE_H
+
+#include <sound/sof/header.h>
+
+struct snd_sof_dev;
+
+#define SOF_PROBE_INVALID_NODE_ID UINT_MAX
+
+struct sof_probe_dma {
+	unsigned int stream_tag;
+	unsigned int dma_buffer_size;
+} __packed;
+
+enum sof_connection_purpose {
+	SOF_CONNECTION_PURPOSE_EXTRACT = 1,
+	SOF_CONNECTION_PURPOSE_INJECT,
+};
+
+struct sof_probe_point_desc {
+	unsigned int buffer_id;
+	unsigned int purpose;
+	unsigned int stream_tag;
+} __packed;
+
+struct sof_ipc_probe_dma_add_params {
+	struct sof_ipc_cmd_hdr hdr;
+	unsigned int num_elems;
+	struct sof_probe_dma dma[0];
+} __packed;
+
+struct sof_ipc_probe_info_params {
+	struct sof_ipc_reply rhdr;
+	unsigned int num_elems;
+	union {
+		struct sof_probe_dma dma[0];
+		struct sof_probe_point_desc desc[0];
+	};
+} __packed;
+
+struct sof_ipc_probe_dma_remove_params {
+	struct sof_ipc_cmd_hdr hdr;
+	unsigned int num_elems;
+	unsigned int stream_tag[0];
+} __packed;
+
+struct sof_ipc_probe_point_add_params {
+	struct sof_ipc_cmd_hdr hdr;
+	unsigned int num_elems;
+	struct sof_probe_point_desc desc[0];
+} __packed;
+
+struct sof_ipc_probe_point_remove_params {
+	struct sof_ipc_cmd_hdr hdr;
+	unsigned int num_elems;
+	unsigned int buffer_id[0];
+} __packed;
+
+int sof_ipc_probe_init(struct snd_sof_dev *sdev,
+		u32 stream_tag, size_t buffer_size);
+int sof_ipc_probe_deinit(struct snd_sof_dev *sdev);
+int sof_ipc_probe_dma_info(struct snd_sof_dev *sdev,
+		struct sof_probe_dma **dma, size_t *num_dma);
+int sof_ipc_probe_dma_add(struct snd_sof_dev *sdev,
+		struct sof_probe_dma *dma, size_t num_dma);
+int sof_ipc_probe_dma_remove(struct snd_sof_dev *sdev,
+		unsigned int *stream_tag, size_t num_stream_tag);
+int sof_ipc_probe_points_info(struct snd_sof_dev *sdev,
+		struct sof_probe_point_desc **desc, size_t *num_desc);
+int sof_ipc_probe_points_add(struct snd_sof_dev *sdev,
+		struct sof_probe_point_desc *desc, size_t num_desc);
+int sof_ipc_probe_points_remove(struct snd_sof_dev *sdev,
+		unsigned int *buffer_id, size_t num_buffer_id);
+
+#endif
diff --git a/sound/soc/sof/sof-audio.c b/sound/soc/sof/sof-audio.c
index 0d8f65b..fc4ed2a 100644
--- a/sound/soc/sof/sof-audio.c
+++ b/sound/soc/sof/sof-audio.c
@@ -11,7 +11,40 @@
 #include "sof-audio.h"
 #include "ops.h"
 
-bool snd_sof_dsp_d0i3_on_suspend(struct snd_sof_dev *sdev)
+/*
+ * helper to determine if there are only D0i3 compatible
+ * streams active
+ */
+bool snd_sof_dsp_only_d0i3_compatible_stream_active(struct snd_sof_dev *sdev)
+{
+	struct snd_pcm_substream *substream;
+	struct snd_sof_pcm *spcm;
+	bool d0i3_compatible_active = false;
+	int dir;
+
+	list_for_each_entry(spcm, &sdev->pcm_list, list) {
+		for_each_pcm_streams(dir) {
+			substream = spcm->stream[dir].substream;
+			if (!substream || !substream->runtime)
+				continue;
+
+			/*
+			 * substream->runtime being not NULL indicates that
+			 * that the stream is open. No need to check the
+			 * stream state.
+			 */
+			if (!spcm->stream[dir].d0i3_compatible)
+				return false;
+
+			d0i3_compatible_active = true;
+		}
+	}
+
+	return d0i3_compatible_active;
+}
+EXPORT_SYMBOL(snd_sof_dsp_only_d0i3_compatible_stream_active);
+
+bool snd_sof_stream_suspend_ignored(struct snd_sof_dev *sdev)
 {
 	struct snd_sof_pcm *spcm;
 
@@ -38,7 +71,14 @@ int sof_set_hw_params_upon_resume(struct device *dev)
 	 * have been suspended.
 	 */
 	list_for_each_entry(spcm, &sdev->pcm_list, list) {
-		for (dir = 0; dir <= SNDRV_PCM_STREAM_CAPTURE; dir++) {
+		for_each_pcm_streams(dir) {
+			/*
+			 * do not reset hw_params upon resume for streams that
+			 * were kept running during suspend
+			 */
+			if (spcm->stream[dir].suspend_ignored)
+				continue;
+
 			substream = spcm->stream[dir].substream;
 			if (!substream || !substream->runtime)
 				continue;
@@ -279,16 +319,11 @@ struct snd_sof_pcm *snd_sof_find_spcm_comp(struct snd_soc_component *scomp,
 	int dir;
 
 	list_for_each_entry(spcm, &sdev->pcm_list, list) {
-		dir = SNDRV_PCM_STREAM_PLAYBACK;
-		if (spcm->stream[dir].comp_id == comp_id) {
-			*direction = dir;
-			return spcm;
-		}
-
-		dir = SNDRV_PCM_STREAM_CAPTURE;
-		if (spcm->stream[dir].comp_id == comp_id) {
-			*direction = dir;
-			return spcm;
+		for_each_pcm_streams(dir) {
+			if (spcm->stream[dir].comp_id == comp_id) {
+				*direction = dir;
+				return spcm;
+			}
 		}
 	}
 
diff --git a/sound/soc/sof/sof-audio.h b/sound/soc/sof/sof-audio.h
index a62fb2d..bf65f31 100644
--- a/sound/soc/sof/sof-audio.h
+++ b/sound/soc/sof/sof-audio.h
@@ -11,6 +11,8 @@
 #ifndef __SOUND_SOC_SOF_AUDIO_H
 #define __SOUND_SOC_SOF_AUDIO_H
 
+#include <linux/workqueue.h>
+
 #include <sound/soc.h>
 #include <sound/control.h>
 #include <sound/sof/stream.h> /* needs to be included before control.h */
@@ -189,6 +191,7 @@ struct snd_sof_pcm *snd_sof_find_spcm_comp(struct snd_soc_component *scomp,
 struct snd_sof_pcm *snd_sof_find_spcm_pcm_id(struct snd_soc_component *scomp,
 					     unsigned int pcm_id);
 void snd_sof_pcm_period_elapsed(struct snd_pcm_substream *substream);
+void snd_sof_pcm_period_elapsed_work(struct work_struct *work);
 
 /*
  * Mixer IPC
@@ -202,7 +205,8 @@ int snd_sof_ipc_set_get_comp_data(struct snd_sof_control *scontrol,
 /* PM */
 int sof_restore_pipelines(struct device *dev);
 int sof_set_hw_params_upon_resume(struct device *dev);
-bool snd_sof_dsp_d0i3_on_suspend(struct snd_sof_dev *sdev);
+bool snd_sof_stream_suspend_ignored(struct snd_sof_dev *sdev);
+bool snd_sof_dsp_only_d0i3_compatible_stream_active(struct snd_sof_dev *sdev);
 
 /* Machine driver enumeration */
 int sof_machine_register(struct snd_sof_dev *sdev, void *pdata);
diff --git a/sound/soc/sof/sof-of-dev.c b/sound/soc/sof/sof-of-dev.c
index 39ea8af..16e49f2 100644
--- a/sound/soc/sof/sof-of-dev.c
+++ b/sound/soc/sof/sof-of-dev.c
@@ -13,12 +13,21 @@
 #include "ops.h"
 
 extern struct snd_sof_dsp_ops sof_imx8_ops;
+extern struct snd_sof_dsp_ops sof_imx8x_ops;
 
 /* platform specific devices */
 #if IS_ENABLED(CONFIG_SND_SOC_SOF_IMX8)
 static struct sof_dev_desc sof_of_imx8qxp_desc = {
 	.default_fw_path = "imx/sof",
 	.default_tplg_path = "imx/sof-tplg",
+	.default_fw_filename = "sof-imx8x.ri",
+	.nocodec_tplg_filename = "sof-imx8-nocodec.tplg",
+	.ops = &sof_imx8x_ops,
+};
+
+static struct sof_dev_desc sof_of_imx8qm_desc = {
+	.default_fw_path = "imx/sof",
+	.default_tplg_path = "imx/sof-tplg",
 	.default_fw_filename = "sof-imx8.ri",
 	.nocodec_tplg_filename = "sof-imx8-nocodec.tplg",
 	.ops = &sof_imx8_ops,
@@ -103,6 +112,7 @@ static int sof_of_remove(struct platform_device *pdev)
 static const struct of_device_id sof_of_ids[] = {
 #if IS_ENABLED(CONFIG_SND_SOC_SOF_IMX8)
 	{ .compatible = "fsl,imx8qxp-dsp", .data = &sof_of_imx8qxp_desc},
+	{ .compatible = "fsl,imx8qm-dsp", .data = &sof_of_imx8qm_desc},
 #endif
 	{ }
 };
diff --git a/sound/soc/sof/sof-priv.h b/sound/soc/sof/sof-priv.h
index bc2337c..a4b297c 100644
--- a/sound/soc/sof/sof-priv.h
+++ b/sound/soc/sof/sof-priv.h
@@ -54,10 +54,26 @@ extern int sof_core_debug;
 	(IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE) || \
 	 IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_IPC_FLOOD_TEST))
 
-/* DSP D0ix sub-state */
-enum sof_d0_substate {
-	SOF_DSP_D0I0 = 0,	/* DSP default D0 substate */
-	SOF_DSP_D0I3,		/* DSP D0i3(low power) substate*/
+/* DSP power state */
+enum sof_dsp_power_states {
+	SOF_DSP_PM_D0,
+	SOF_DSP_PM_D1,
+	SOF_DSP_PM_D2,
+	SOF_DSP_PM_D3_HOT,
+	SOF_DSP_PM_D3,
+	SOF_DSP_PM_D3_COLD,
+};
+
+struct sof_dsp_power_state {
+	u32 state;
+	u32 substate; /* platform-specific */
+};
+
+/* System suspend target state */
+enum sof_system_suspend_state {
+	SOF_SUSPEND_NONE = 0,
+	SOF_SUSPEND_S0IX,
+	SOF_SUSPEND_S3,
 };
 
 struct snd_sof_dev;
@@ -154,6 +170,27 @@ struct snd_sof_dsp_ops {
 	snd_pcm_uframes_t (*pcm_pointer)(struct snd_sof_dev *sdev,
 					 struct snd_pcm_substream *substream); /* optional */
 
+#if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_PROBES)
+	/* Except for probe_pointer, all probe ops are mandatory */
+	int (*probe_assign)(struct snd_sof_dev *sdev,
+			struct snd_compr_stream *cstream,
+			struct snd_soc_dai *dai); /* mandatory */
+	int (*probe_free)(struct snd_sof_dev *sdev,
+			struct snd_compr_stream *cstream,
+			struct snd_soc_dai *dai); /* mandatory */
+	int (*probe_set_params)(struct snd_sof_dev *sdev,
+			struct snd_compr_stream *cstream,
+			struct snd_compr_params *params,
+			struct snd_soc_dai *dai); /* mandatory */
+	int (*probe_trigger)(struct snd_sof_dev *sdev,
+			struct snd_compr_stream *cstream, int cmd,
+			struct snd_soc_dai *dai); /* mandatory */
+	int (*probe_pointer)(struct snd_sof_dev *sdev,
+			struct snd_compr_stream *cstream,
+			struct snd_compr_tstamp *tstamp,
+			struct snd_soc_dai *dai); /* optional */
+#endif
+
 	/* host read DSP stream data */
 	void (*ipc_msg_data)(struct snd_sof_dev *sdev,
 			     struct snd_pcm_substream *substream,
@@ -169,14 +206,15 @@ struct snd_sof_dsp_ops {
 	int (*post_fw_run)(struct snd_sof_dev *sof_dev); /* optional */
 
 	/* DSP PM */
-	int (*suspend)(struct snd_sof_dev *sof_dev); /* optional */
+	int (*suspend)(struct snd_sof_dev *sof_dev,
+		       u32 target_state); /* optional */
 	int (*resume)(struct snd_sof_dev *sof_dev); /* optional */
 	int (*runtime_suspend)(struct snd_sof_dev *sof_dev); /* optional */
 	int (*runtime_resume)(struct snd_sof_dev *sof_dev); /* optional */
 	int (*runtime_idle)(struct snd_sof_dev *sof_dev); /* optional */
 	int (*set_hw_params_upon_resume)(struct snd_sof_dev *sdev); /* optional */
 	int (*set_power_state)(struct snd_sof_dev *sdev,
-			       enum sof_d0_substate d0_substate); /* optional */
+			       const struct sof_dsp_power_state *target_state); /* optional */
 
 	/* DSP clocking */
 	int (*set_clk)(struct snd_sof_dev *sof_dev, u32 freq); /* optional */
@@ -323,10 +361,11 @@ struct snd_sof_dev {
 	 */
 	struct snd_soc_component_driver plat_drv;
 
-	/* power states related */
-	enum sof_d0_substate d0_substate;
-	/* flag to track if the intended power target of suspend is S0ix */
-	bool s0_suspend;
+	/* current DSP power state */
+	struct sof_dsp_power_state dsp_power_state;
+
+	/* Intended power target of system suspend */
+	enum sof_system_suspend_state system_suspend_target;
 
 	/* DSP firmware boot */
 	wait_queue_head_t boot_wait;
@@ -376,16 +415,15 @@ struct snd_sof_dev {
 	u32 enabled_cores_mask; /* keep track of enabled cores */
 
 	/* FW configuration */
-	struct sof_ipc_dma_buffer_data *info_buffer;
 	struct sof_ipc_window *info_window;
 
 	/* IPC timeouts in ms */
 	int ipc_timeout;
 	int boot_timeout;
 
-	/* Wait queue for code loading */
-	wait_queue_head_t waitq;
-	int code_loading;
+#if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_PROBES)
+	unsigned int extractor_stream_tag;
+#endif
 
 	/* DMA for Trace */
 	struct snd_dma_buffer dmatb;
@@ -417,8 +455,6 @@ int snd_sof_resume(struct device *dev);
 int snd_sof_suspend(struct device *dev);
 int snd_sof_prepare(struct device *dev);
 void snd_sof_complete(struct device *dev);
-int snd_sof_set_d0_substate(struct snd_sof_dev *sdev,
-			    enum sof_d0_substate d0_substate);
 
 void snd_sof_new_platform_drv(struct snd_sof_dev *sdev);
 
@@ -454,6 +490,9 @@ int snd_sof_ipc_valid(struct snd_sof_dev *sdev);
 int sof_ipc_tx_message(struct snd_sof_ipc *ipc, u32 header,
 		       void *msg_data, size_t msg_bytes, void *reply_data,
 		       size_t reply_bytes);
+int sof_ipc_tx_message_no_pm(struct snd_sof_ipc *ipc, u32 header,
+			     void *msg_data, size_t msg_bytes,
+			     void *reply_data, size_t reply_bytes);
 
 /*
  * Trace/debug
diff --git a/sound/soc/sof/topology.c b/sound/soc/sof/topology.c
index 9f4f886..fe8ba3e 100644
--- a/sound/soc/sof/topology.c
+++ b/sound/soc/sof/topology.c
@@ -9,6 +9,7 @@
 //
 
 #include <linux/firmware.h>
+#include <linux/workqueue.h>
 #include <sound/tlv.h>
 #include <sound/pcm_params.h>
 #include <uapi/sound/sof/tokens.h>
@@ -1240,6 +1241,8 @@ static int sof_connect_dai_widget(struct snd_soc_component *scomp,
 {
 	struct snd_soc_card *card = scomp->card;
 	struct snd_soc_pcm_runtime *rtd;
+	struct snd_soc_dai *cpu_dai;
+	int i;
 
 	list_for_each_entry(rtd, &card->rtd_list, list) {
 		dev_vdbg(scomp->dev, "tplg: check widget: %s stream: %s dai stream: %s\n",
@@ -1254,13 +1257,15 @@ static int sof_connect_dai_widget(struct snd_soc_component *scomp,
 
 		switch (w->id) {
 		case snd_soc_dapm_dai_out:
-			rtd->cpu_dai->capture_widget = w;
+			for_each_rtd_cpu_dais(rtd, i, cpu_dai)
+				cpu_dai->capture_widget = w;
 			dai->name = rtd->dai_link->name;
 			dev_dbg(scomp->dev, "tplg: connected widget %s -> DAI link %s\n",
 				w->name, rtd->dai_link->name);
 			break;
 		case snd_soc_dapm_dai_in:
-			rtd->cpu_dai->playback_widget = w;
+			for_each_rtd_cpu_dais(rtd, i, cpu_dai)
+				cpu_dai->playback_widget = w;
 			dai->name = rtd->dai_link->name;
 			dev_dbg(scomp->dev, "tplg: connected widget %s -> DAI link %s\n",
 				w->name, rtd->dai_link->name);
@@ -2444,7 +2449,7 @@ static int sof_dai_load(struct snd_soc_component *scomp, int index,
 	struct snd_soc_tplg_stream_caps *caps;
 	struct snd_soc_tplg_private *private = &pcm->priv;
 	struct snd_sof_pcm *spcm;
-	int stream = SNDRV_PCM_STREAM_PLAYBACK;
+	int stream;
 	int ret = 0;
 
 	/* nothing to do for BEs atm */
@@ -2456,8 +2461,12 @@ static int sof_dai_load(struct snd_soc_component *scomp, int index,
 		return -ENOMEM;
 
 	spcm->scomp = scomp;
-	spcm->stream[SNDRV_PCM_STREAM_PLAYBACK].comp_id = COMP_ID_UNASSIGNED;
-	spcm->stream[SNDRV_PCM_STREAM_CAPTURE].comp_id = COMP_ID_UNASSIGNED;
+
+	for_each_pcm_streams(stream) {
+		spcm->stream[stream].comp_id = COMP_ID_UNASSIGNED;
+		INIT_WORK(&spcm->stream[stream].period_elapsed_work,
+			  snd_sof_pcm_period_elapsed_work);
+	}
 
 	spcm->pcm = *pcm;
 	dev_dbg(scomp->dev, "tplg: load pcm %s\n", pcm->dai_name);
@@ -2478,8 +2487,10 @@ static int sof_dai_load(struct snd_soc_component *scomp, int index,
 	if (!spcm->pcm.playback)
 		goto capture;
 
+	stream = SNDRV_PCM_STREAM_PLAYBACK;
+
 	dev_vdbg(scomp->dev, "tplg: pcm %s stream tokens: playback d0i3:%d\n",
-		 spcm->pcm.pcm_name, spcm->stream[0].d0i3_compatible);
+		 spcm->pcm.pcm_name, spcm->stream[stream].d0i3_compatible);
 
 	caps = &spcm->pcm.caps[stream];
 
@@ -2509,7 +2520,7 @@ static int sof_dai_load(struct snd_soc_component *scomp, int index,
 		return ret;
 
 	dev_vdbg(scomp->dev, "tplg: pcm %s stream tokens: capture d0i3:%d\n",
-		 spcm->pcm.pcm_name, spcm->stream[1].d0i3_compatible);
+		 spcm->pcm.pcm_name, spcm->stream[stream].d0i3_compatible);
 
 	caps = &spcm->pcm.caps[stream];
 
diff --git a/sound/soc/sprd/Kconfig b/sound/soc/sprd/Kconfig
index 5474fd3..5e0ac82 100644
--- a/sound/soc/sprd/Kconfig
+++ b/sound/soc/sprd/Kconfig
@@ -8,7 +8,7 @@
 	  the Spreadtrum SoCs' Audio interfaces.
 
 config SND_SOC_SPRD_MCDT
-	bool "Spreadtrum multi-channel data transfer support"
+	tristate "Spreadtrum multi-channel data transfer support"
 	depends on SND_SOC_SPRD
 	help
 	  Say y here to enable multi-channel data transfer support. It
diff --git a/sound/soc/sprd/sprd-mcdt.h b/sound/soc/sprd/sprd-mcdt.h
index 9cc7e207..679e3af 100644
--- a/sound/soc/sprd/sprd-mcdt.h
+++ b/sound/soc/sprd/sprd-mcdt.h
@@ -48,7 +48,7 @@ struct sprd_mcdt_chan {
 	struct list_head list;
 };
 
-#ifdef CONFIG_SND_SOC_SPRD_MCDT
+#if IS_ENABLED(CONFIG_SND_SOC_SPRD_MCDT)
 struct sprd_mcdt_chan *sprd_mcdt_request_chan(u8 channel,
 					      enum sprd_mcdt_channel_type type);
 void sprd_mcdt_free_chan(struct sprd_mcdt_chan *chan);
diff --git a/sound/soc/sprd/sprd-pcm-compress.c b/sound/soc/sprd/sprd-pcm-compress.c
index 6cddf551b..74d4834 100644
--- a/sound/soc/sprd/sprd-pcm-compress.c
+++ b/sound/soc/sprd/sprd-pcm-compress.c
@@ -135,7 +135,7 @@ static int sprd_platform_compr_dma_config(struct snd_compr_stream *cstream,
 	struct snd_soc_component *component =
 		snd_soc_rtdcom_lookup(rtd, DRV_NAME);
 	struct device *dev = component->dev;
-	struct sprd_compr_data *data = snd_soc_dai_get_drvdata(rtd->cpu_dai);
+	struct sprd_compr_data *data = snd_soc_dai_get_drvdata(asoc_rtd_to_cpu(rtd, 0));
 	struct sprd_pcm_dma_params *dma_params = data->dma_params;
 	struct sprd_compr_dma *dma = &stream->dma[channel];
 	struct dma_slave_config config = { };
@@ -321,7 +321,7 @@ static int sprd_platform_compr_open(struct snd_compr_stream *cstream)
 	struct snd_soc_component *component =
 		snd_soc_rtdcom_lookup(rtd, DRV_NAME);
 	struct device *dev = component->dev;
-	struct sprd_compr_data *data = snd_soc_dai_get_drvdata(rtd->cpu_dai);
+	struct sprd_compr_data *data = snd_soc_dai_get_drvdata(asoc_rtd_to_cpu(rtd, 0));
 	struct sprd_compr_stream *stream;
 	struct sprd_compr_callback cb;
 	int stream_id = cstream->direction, ret;
diff --git a/sound/soc/sprd/sprd-pcm-dma.c b/sound/soc/sprd/sprd-pcm-dma.c
index 2284558..d12d3ca 100644
--- a/sound/soc/sprd/sprd-pcm-dma.c
+++ b/sound/soc/sprd/sprd-pcm-dma.c
@@ -200,7 +200,7 @@ static int sprd_pcm_hw_params(struct snd_soc_component *component,
 	unsigned long flags;
 	int ret, i, j, sg_num;
 
-	dma_params = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+	dma_params = snd_soc_dai_get_dma_data(asoc_rtd_to_cpu(rtd, 0), substream);
 	if (!dma_params) {
 		dev_warn(component->dev, "no dma parameters setting\n");
 		dma_private->params = NULL;
diff --git a/sound/soc/stm/stm32_adfsdm.c b/sound/soc/stm/stm32_adfsdm.c
index 51407a2..16ff029 100644
--- a/sound/soc/stm/stm32_adfsdm.c
+++ b/sound/soc/stm/stm32_adfsdm.c
@@ -215,7 +215,7 @@ static int stm32_adfsdm_trigger(struct snd_soc_component *component,
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct stm32_adfsdm_priv *priv =
-		snd_soc_dai_get_drvdata(rtd->cpu_dai);
+		snd_soc_dai_get_drvdata(asoc_rtd_to_cpu(rtd, 0));
 
 	switch (cmd) {
 	case SNDRV_PCM_TRIGGER_START:
@@ -235,7 +235,7 @@ static int stm32_adfsdm_pcm_open(struct snd_soc_component *component,
 				 struct snd_pcm_substream *substream)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct stm32_adfsdm_priv *priv = snd_soc_dai_get_drvdata(rtd->cpu_dai);
+	struct stm32_adfsdm_priv *priv = snd_soc_dai_get_drvdata(asoc_rtd_to_cpu(rtd, 0));
 	int ret;
 
 	ret =  snd_soc_set_runtime_hwparams(substream, &stm32_adfsdm_pcm_hw);
@@ -250,7 +250,7 @@ static int stm32_adfsdm_pcm_close(struct snd_soc_component *component,
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct stm32_adfsdm_priv *priv =
-		snd_soc_dai_get_drvdata(rtd->cpu_dai);
+		snd_soc_dai_get_drvdata(asoc_rtd_to_cpu(rtd, 0));
 
 	priv->substream = NULL;
 
@@ -263,7 +263,7 @@ static snd_pcm_uframes_t stm32_adfsdm_pcm_pointer(
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct stm32_adfsdm_priv *priv =
-		snd_soc_dai_get_drvdata(rtd->cpu_dai);
+		snd_soc_dai_get_drvdata(asoc_rtd_to_cpu(rtd, 0));
 
 	return bytes_to_frames(substream->runtime, priv->pos);
 }
@@ -274,7 +274,7 @@ static int stm32_adfsdm_pcm_hw_params(struct snd_soc_component *component,
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct stm32_adfsdm_priv *priv =
-		snd_soc_dai_get_drvdata(rtd->cpu_dai);
+		snd_soc_dai_get_drvdata(asoc_rtd_to_cpu(rtd, 0));
 
 	priv->pcm_buff = substream->runtime->dma_area;
 
@@ -287,7 +287,7 @@ static int stm32_adfsdm_pcm_new(struct snd_soc_component *component,
 {
 	struct snd_pcm *pcm = rtd->pcm;
 	struct stm32_adfsdm_priv *priv =
-		snd_soc_dai_get_drvdata(rtd->cpu_dai);
+		snd_soc_dai_get_drvdata(asoc_rtd_to_cpu(rtd, 0));
 	unsigned int size = DFSDM_MAX_PERIODS * DFSDM_MAX_PERIOD_SIZE;
 
 	snd_pcm_set_managed_buffer_all(pcm, SNDRV_DMA_TYPE_DEV,
diff --git a/sound/soc/stm/stm32_i2s.c b/sound/soc/stm/stm32_i2s.c
index 3e7226a..7c4d63c 100644
--- a/sound/soc/stm/stm32_i2s.c
+++ b/sound/soc/stm/stm32_i2s.c
@@ -831,25 +831,33 @@ static int stm32_i2s_parse_dt(struct platform_device *pdev,
 	/* Get clocks */
 	i2s->pclk = devm_clk_get(&pdev->dev, "pclk");
 	if (IS_ERR(i2s->pclk)) {
-		dev_err(&pdev->dev, "Could not get pclk\n");
+		if (PTR_ERR(i2s->pclk) != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Could not get pclk: %ld\n",
+				PTR_ERR(i2s->pclk));
 		return PTR_ERR(i2s->pclk);
 	}
 
 	i2s->i2sclk = devm_clk_get(&pdev->dev, "i2sclk");
 	if (IS_ERR(i2s->i2sclk)) {
-		dev_err(&pdev->dev, "Could not get i2sclk\n");
+		if (PTR_ERR(i2s->i2sclk) != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Could not get i2sclk: %ld\n",
+				PTR_ERR(i2s->i2sclk));
 		return PTR_ERR(i2s->i2sclk);
 	}
 
 	i2s->x8kclk = devm_clk_get(&pdev->dev, "x8k");
 	if (IS_ERR(i2s->x8kclk)) {
-		dev_err(&pdev->dev, "missing x8k parent clock\n");
+		if (PTR_ERR(i2s->x8kclk) != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Could not get x8k parent clock: %ld\n",
+				PTR_ERR(i2s->x8kclk));
 		return PTR_ERR(i2s->x8kclk);
 	}
 
 	i2s->x11kclk = devm_clk_get(&pdev->dev, "x11k");
 	if (IS_ERR(i2s->x11kclk)) {
-		dev_err(&pdev->dev, "missing x11k parent clock\n");
+		if (PTR_ERR(i2s->x11kclk) != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Could not get x11k parent clock: %ld\n",
+				PTR_ERR(i2s->x11kclk));
 		return PTR_ERR(i2s->x11kclk);
 	}
 
@@ -866,12 +874,24 @@ static int stm32_i2s_parse_dt(struct platform_device *pdev,
 	}
 
 	/* Reset */
-	rst = devm_reset_control_get_exclusive(&pdev->dev, NULL);
-	if (!IS_ERR(rst)) {
-		reset_control_assert(rst);
-		udelay(2);
-		reset_control_deassert(rst);
+	rst = devm_reset_control_get_optional_exclusive(&pdev->dev, NULL);
+	if (IS_ERR(rst)) {
+		if (PTR_ERR(rst) != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Reset controller error %ld\n",
+				PTR_ERR(rst));
+		return PTR_ERR(rst);
 	}
+	reset_control_assert(rst);
+	udelay(2);
+	reset_control_deassert(rst);
+
+	return 0;
+}
+
+static int stm32_i2s_remove(struct platform_device *pdev)
+{
+	snd_dmaengine_pcm_unregister(&pdev->dev);
+	snd_soc_unregister_component(&pdev->dev);
 
 	return 0;
 }
@@ -903,42 +923,51 @@ static int stm32_i2s_probe(struct platform_device *pdev)
 	i2s->regmap = devm_regmap_init_mmio_clk(&pdev->dev, "pclk",
 						i2s->base, i2s->regmap_conf);
 	if (IS_ERR(i2s->regmap)) {
-		dev_err(&pdev->dev, "regmap init failed\n");
+		if (PTR_ERR(i2s->regmap) != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Regmap init error %ld\n",
+				PTR_ERR(i2s->regmap));
 		return PTR_ERR(i2s->regmap);
 	}
 
-	ret = devm_snd_soc_register_component(&pdev->dev, &stm32_i2s_component,
-					      i2s->dai_drv, 1);
-	if (ret)
+	ret = snd_dmaengine_pcm_register(&pdev->dev, &stm32_i2s_pcm_config, 0);
+	if (ret) {
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "PCM DMA register error %d\n", ret);
 		return ret;
+	}
 
-	ret = devm_snd_dmaengine_pcm_register(&pdev->dev,
-					      &stm32_i2s_pcm_config, 0);
-	if (ret)
+	ret = snd_soc_register_component(&pdev->dev, &stm32_i2s_component,
+					 i2s->dai_drv, 1);
+	if (ret) {
+		snd_dmaengine_pcm_unregister(&pdev->dev);
 		return ret;
+	}
 
 	/* Set SPI/I2S in i2s mode */
 	ret = regmap_update_bits(i2s->regmap, STM32_I2S_CGFR_REG,
 				 I2S_CGFR_I2SMOD, I2S_CGFR_I2SMOD);
 	if (ret)
-		return ret;
+		goto error;
 
 	ret = regmap_read(i2s->regmap, STM32_I2S_IPIDR_REG, &val);
 	if (ret)
-		return ret;
+		goto error;
 
 	if (val == I2S_IPIDR_NUMBER) {
 		ret = regmap_read(i2s->regmap, STM32_I2S_HWCFGR_REG, &val);
 		if (ret)
-			return ret;
+			goto error;
 
 		if (!FIELD_GET(I2S_HWCFGR_I2S_SUPPORT_MASK, val)) {
 			dev_err(&pdev->dev,
 				"Device does not support i2s mode\n");
-			return -EPERM;
+			ret = -EPERM;
+			goto error;
 		}
 
 		ret = regmap_read(i2s->regmap, STM32_I2S_VERR_REG, &val);
+		if (ret)
+			goto error;
 
 		dev_dbg(&pdev->dev, "I2S version: %lu.%lu registered\n",
 			FIELD_GET(I2S_VERR_MAJ_MASK, val),
@@ -946,6 +975,11 @@ static int stm32_i2s_probe(struct platform_device *pdev)
 	}
 
 	return ret;
+
+error:
+	stm32_i2s_remove(pdev);
+
+	return ret;
 }
 
 MODULE_DEVICE_TABLE(of, stm32_i2s_ids);
@@ -981,6 +1015,7 @@ static struct platform_driver stm32_i2s_driver = {
 		.pm = &stm32_i2s_pm_ops,
 	},
 	.probe = stm32_i2s_probe,
+	.remove = stm32_i2s_remove,
 };
 
 module_platform_driver(stm32_i2s_driver);
diff --git a/sound/soc/stm/stm32_sai.c b/sound/soc/stm/stm32_sai.c
index e202675..058757c 100644
--- a/sound/soc/stm/stm32_sai.c
+++ b/sound/soc/stm/stm32_sai.c
@@ -174,20 +174,26 @@ static int stm32_sai_probe(struct platform_device *pdev)
 	if (!STM_SAI_IS_F4(sai)) {
 		sai->pclk = devm_clk_get(&pdev->dev, "pclk");
 		if (IS_ERR(sai->pclk)) {
-			dev_err(&pdev->dev, "missing bus clock pclk\n");
+			if (PTR_ERR(sai->pclk) != -EPROBE_DEFER)
+				dev_err(&pdev->dev, "missing bus clock pclk: %ld\n",
+					PTR_ERR(sai->pclk));
 			return PTR_ERR(sai->pclk);
 		}
 	}
 
 	sai->clk_x8k = devm_clk_get(&pdev->dev, "x8k");
 	if (IS_ERR(sai->clk_x8k)) {
-		dev_err(&pdev->dev, "missing x8k parent clock\n");
+		if (PTR_ERR(sai->clk_x8k) != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "missing x8k parent clock: %ld\n",
+				PTR_ERR(sai->clk_x8k));
 		return PTR_ERR(sai->clk_x8k);
 	}
 
 	sai->clk_x11k = devm_clk_get(&pdev->dev, "x11k");
 	if (IS_ERR(sai->clk_x11k)) {
-		dev_err(&pdev->dev, "missing x11k parent clock\n");
+		if (PTR_ERR(sai->clk_x11k) != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "missing x11k parent clock: %ld\n",
+				PTR_ERR(sai->clk_x11k));
 		return PTR_ERR(sai->clk_x11k);
 	}
 
@@ -197,12 +203,16 @@ static int stm32_sai_probe(struct platform_device *pdev)
 		return sai->irq;
 
 	/* reset */
-	rst = devm_reset_control_get_exclusive(&pdev->dev, NULL);
-	if (!IS_ERR(rst)) {
-		reset_control_assert(rst);
-		udelay(2);
-		reset_control_deassert(rst);
+	rst = devm_reset_control_get_optional_exclusive(&pdev->dev, NULL);
+	if (IS_ERR(rst)) {
+		if (PTR_ERR(rst) != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Reset controller error %ld\n",
+				PTR_ERR(rst));
+		return PTR_ERR(rst);
 	}
+	reset_control_assert(rst);
+	udelay(2);
+	reset_control_deassert(rst);
 
 	/* Enable peripheral clock to allow register access */
 	ret = clk_prepare_enable(sai->pclk);
diff --git a/sound/soc/stm/stm32_sai_sub.c b/sound/soc/stm/stm32_sai_sub.c
index 10eb4b8..0d0c9af 100644
--- a/sound/soc/stm/stm32_sai_sub.c
+++ b/sound/soc/stm/stm32_sai_sub.c
@@ -1238,7 +1238,7 @@ static int stm32_sai_pcm_process_spdif(struct snd_pcm_substream *substream,
 {
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	struct stm32_sai_sub_data *sai = dev_get_drvdata(cpu_dai->dev);
 	int *ptr = (int *)(runtime->dma_area + hwoff +
 			   channel * (runtime->dma_bytes / runtime->channels));
@@ -1380,7 +1380,9 @@ static int stm32_sai_sub_parse_of(struct platform_device *pdev,
 	sai->regmap = devm_regmap_init_mmio(&pdev->dev, base,
 					    sai->regmap_config);
 	if (IS_ERR(sai->regmap)) {
-		dev_err(&pdev->dev, "Failed to initialize MMIO\n");
+		if (PTR_ERR(sai->regmap) != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Regmap init error %ld\n",
+				PTR_ERR(sai->regmap));
 		return PTR_ERR(sai->regmap);
 	}
 
@@ -1471,7 +1473,9 @@ static int stm32_sai_sub_parse_of(struct platform_device *pdev,
 	of_node_put(args.np);
 	sai->sai_ck = devm_clk_get(&pdev->dev, "sai_ck");
 	if (IS_ERR(sai->sai_ck)) {
-		dev_err(&pdev->dev, "Missing kernel clock sai_ck\n");
+		if (PTR_ERR(sai->sai_ck) != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Missing kernel clock sai_ck: %ld\n",
+				PTR_ERR(sai->sai_ck));
 		return PTR_ERR(sai->sai_ck);
 	}
 
@@ -1545,14 +1549,17 @@ static int stm32_sai_sub_probe(struct platform_device *pdev)
 
 	ret = snd_dmaengine_pcm_register(&pdev->dev, conf, 0);
 	if (ret) {
-		dev_err(&pdev->dev, "Could not register pcm dma\n");
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Could not register pcm dma\n");
 		return ret;
 	}
 
 	ret = snd_soc_register_component(&pdev->dev, &stm32_component,
 					 &sai->cpu_dai_drv, 1);
-	if (ret)
+	if (ret) {
+		snd_dmaengine_pcm_unregister(&pdev->dev);
 		return ret;
+	}
 
 	if (STM_SAI_PROTOCOL_IS_SPDIF(sai))
 		conf = &stm32_sai_pcm_config_spdif;
diff --git a/sound/soc/stm/stm32_spdifrx.c b/sound/soc/stm/stm32_spdifrx.c
index 3769d9c..1bfa3b2 100644
--- a/sound/soc/stm/stm32_spdifrx.c
+++ b/sound/soc/stm/stm32_spdifrx.c
@@ -406,7 +406,9 @@ static int stm32_spdifrx_dma_ctrl_register(struct device *dev,
 
 	spdifrx->ctrl_chan = dma_request_chan(dev, "rx-ctrl");
 	if (IS_ERR(spdifrx->ctrl_chan)) {
-		dev_err(dev, "dma_request_slave_channel failed\n");
+		if (PTR_ERR(spdifrx->ctrl_chan) != -EPROBE_DEFER)
+			dev_err(dev, "dma_request_slave_channel error %ld\n",
+				PTR_ERR(spdifrx->ctrl_chan));
 		return PTR_ERR(spdifrx->ctrl_chan);
 	}
 
@@ -929,7 +931,9 @@ static int stm32_spdifrx_parse_of(struct platform_device *pdev,
 
 	spdifrx->kclk = devm_clk_get(&pdev->dev, "kclk");
 	if (IS_ERR(spdifrx->kclk)) {
-		dev_err(&pdev->dev, "Could not get kclk\n");
+		if (PTR_ERR(spdifrx->kclk) != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Could not get kclk: %ld\n",
+				PTR_ERR(spdifrx->kclk));
 		return PTR_ERR(spdifrx->kclk);
 	}
 
@@ -940,6 +944,22 @@ static int stm32_spdifrx_parse_of(struct platform_device *pdev,
 	return 0;
 }
 
+static int stm32_spdifrx_remove(struct platform_device *pdev)
+{
+	struct stm32_spdifrx_data *spdifrx = platform_get_drvdata(pdev);
+
+	if (spdifrx->ctrl_chan)
+		dma_release_channel(spdifrx->ctrl_chan);
+
+	if (spdifrx->dmab)
+		snd_dma_free_pages(spdifrx->dmab);
+
+	snd_dmaengine_pcm_unregister(&pdev->dev);
+	snd_soc_unregister_component(&pdev->dev);
+
+	return 0;
+}
+
 static int stm32_spdifrx_probe(struct platform_device *pdev)
 {
 	struct stm32_spdifrx_data *spdifrx;
@@ -967,7 +987,9 @@ static int stm32_spdifrx_probe(struct platform_device *pdev)
 						    spdifrx->base,
 						    spdifrx->regmap_conf);
 	if (IS_ERR(spdifrx->regmap)) {
-		dev_err(&pdev->dev, "Regmap init failed\n");
+		if (PTR_ERR(spdifrx->regmap) != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Regmap init error %ld\n",
+				PTR_ERR(spdifrx->regmap));
 		return PTR_ERR(spdifrx->regmap);
 	}
 
@@ -978,37 +1000,46 @@ static int stm32_spdifrx_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	rst = devm_reset_control_get_exclusive(&pdev->dev, NULL);
-	if (!IS_ERR(rst)) {
-		reset_control_assert(rst);
-		udelay(2);
-		reset_control_deassert(rst);
+	rst = devm_reset_control_get_optional_exclusive(&pdev->dev, NULL);
+	if (IS_ERR(rst)) {
+		if (PTR_ERR(rst) != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Reset controller error %ld\n",
+				PTR_ERR(rst));
+		return PTR_ERR(rst);
+	}
+	reset_control_assert(rst);
+	udelay(2);
+	reset_control_deassert(rst);
+
+	pcm_config = &stm32_spdifrx_pcm_config;
+	ret = snd_dmaengine_pcm_register(&pdev->dev, pcm_config, 0);
+	if (ret) {
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "PCM DMA register error %d\n", ret);
+		return ret;
 	}
 
-	ret = devm_snd_soc_register_component(&pdev->dev,
-					      &stm32_spdifrx_component,
-					      stm32_spdifrx_dai,
-					      ARRAY_SIZE(stm32_spdifrx_dai));
-	if (ret)
+	ret = snd_soc_register_component(&pdev->dev,
+					 &stm32_spdifrx_component,
+					 stm32_spdifrx_dai,
+					 ARRAY_SIZE(stm32_spdifrx_dai));
+	if (ret) {
+		snd_dmaengine_pcm_unregister(&pdev->dev);
 		return ret;
+	}
 
 	ret = stm32_spdifrx_dma_ctrl_register(&pdev->dev, spdifrx);
 	if (ret)
 		goto error;
 
-	pcm_config = &stm32_spdifrx_pcm_config;
-	ret = devm_snd_dmaengine_pcm_register(&pdev->dev, pcm_config, 0);
-	if (ret) {
-		dev_err(&pdev->dev, "PCM DMA register returned %d\n", ret);
-		goto error;
-	}
-
 	ret = regmap_read(spdifrx->regmap, STM32_SPDIFRX_IDR, &idr);
 	if (ret)
 		goto error;
 
 	if (idr == SPDIFRX_IPIDR_NUMBER) {
 		ret = regmap_read(spdifrx->regmap, STM32_SPDIFRX_VERR, &ver);
+		if (ret)
+			goto error;
 
 		dev_dbg(&pdev->dev, "SPDIFRX version: %lu.%lu registered\n",
 			FIELD_GET(SPDIFRX_VERR_MAJ_MASK, ver),
@@ -1018,27 +1049,11 @@ static int stm32_spdifrx_probe(struct platform_device *pdev)
 	return ret;
 
 error:
-	if (!IS_ERR(spdifrx->ctrl_chan))
-		dma_release_channel(spdifrx->ctrl_chan);
-	if (spdifrx->dmab)
-		snd_dma_free_pages(spdifrx->dmab);
+	stm32_spdifrx_remove(pdev);
 
 	return ret;
 }
 
-static int stm32_spdifrx_remove(struct platform_device *pdev)
-{
-	struct stm32_spdifrx_data *spdifrx = platform_get_drvdata(pdev);
-
-	if (spdifrx->ctrl_chan)
-		dma_release_channel(spdifrx->ctrl_chan);
-
-	if (spdifrx->dmab)
-		snd_dma_free_pages(spdifrx->dmab);
-
-	return 0;
-}
-
 MODULE_DEVICE_TABLE(of, stm32_spdifrx_ids);
 
 #ifdef CONFIG_PM_SLEEP
diff --git a/sound/soc/sunxi/sun4i-spdif.c b/sound/soc/sunxi/sun4i-spdif.c
index 98a9fe6..86779a9 100644
--- a/sound/soc/sunxi/sun4i-spdif.c
+++ b/sound/soc/sunxi/sun4i-spdif.c
@@ -244,7 +244,7 @@ static int sun4i_spdif_startup(struct snd_pcm_substream *substream,
 			       struct snd_soc_dai *cpu_dai)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct sun4i_spdif_dev *host = snd_soc_dai_get_drvdata(rtd->cpu_dai);
+	struct sun4i_spdif_dev *host = snd_soc_dai_get_drvdata(asoc_rtd_to_cpu(rtd, 0));
 
 	if (substream->stream != SNDRV_PCM_STREAM_PLAYBACK)
 		return -EINVAL;
diff --git a/sound/soc/sunxi/sun8i-codec.c b/sound/soc/sunxi/sun8i-codec.c
index 686561d..ca51af1 100644
--- a/sound/soc/sunxi/sun8i-codec.c
+++ b/sound/soc/sunxi/sun8i-codec.c
@@ -86,7 +86,6 @@
 #define SUN8I_AIF1CLK_CTRL_AIF1_BCLK_DIV_MASK	GENMASK(12, 9)
 
 struct sun8i_codec {
-	struct device	*dev;
 	struct regmap	*regmap;
 	struct clk	*clk_module;
 	struct clk	*clk_bus;
@@ -542,8 +541,6 @@ static int sun8i_codec_probe(struct platform_device *pdev)
 	if (!scodec)
 		return -ENOMEM;
 
-	scodec->dev = &pdev->dev;
-
 	scodec->clk_module = devm_clk_get(&pdev->dev, "mod");
 	if (IS_ERR(scodec->clk_module)) {
 		dev_err(&pdev->dev, "Failed to get the module clock\n");
diff --git a/sound/soc/tegra/tegra_alc5632.c b/sound/soc/tegra/tegra_alc5632.c
index 9e8b149..ec39ecb 100644
--- a/sound/soc/tegra/tegra_alc5632.c
+++ b/sound/soc/tegra/tegra_alc5632.c
@@ -37,7 +37,7 @@ static int tegra_alc5632_asoc_hw_params(struct snd_pcm_substream *substream,
 					struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	struct snd_soc_card *card = rtd->card;
 	struct tegra_alc5632 *alc5632 = snd_soc_card_get_drvdata(card);
 	int srate, mclk;
diff --git a/sound/soc/tegra/tegra_max98090.c b/sound/soc/tegra/tegra_max98090.c
index 4954a33..d800b62 100644
--- a/sound/soc/tegra/tegra_max98090.c
+++ b/sound/soc/tegra/tegra_max98090.c
@@ -38,7 +38,7 @@ static int tegra_max98090_asoc_hw_params(struct snd_pcm_substream *substream,
 					struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	struct snd_soc_card *card = rtd->card;
 	struct tegra_max98090 *machine = snd_soc_card_get_drvdata(card);
 	int srate, mclk;
diff --git a/sound/soc/tegra/tegra_rt5640.c b/sound/soc/tegra/tegra_rt5640.c
index d46915a..9878bc3e 100644
--- a/sound/soc/tegra/tegra_rt5640.c
+++ b/sound/soc/tegra/tegra_rt5640.c
@@ -40,7 +40,7 @@ static int tegra_rt5640_asoc_hw_params(struct snd_pcm_substream *substream,
 					struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	struct snd_soc_card *card = rtd->card;
 	struct tegra_rt5640 *machine = snd_soc_card_get_drvdata(card);
 	int srate, mclk;
diff --git a/sound/soc/tegra/tegra_rt5677.c b/sound/soc/tegra/tegra_rt5677.c
index 81cb6cc..5821313 100644
--- a/sound/soc/tegra/tegra_rt5677.c
+++ b/sound/soc/tegra/tegra_rt5677.c
@@ -42,7 +42,7 @@ static int tegra_rt5677_asoc_hw_params(struct snd_pcm_substream *substream,
 					struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	struct snd_soc_card *card = rtd->card;
 	struct tegra_rt5677 *machine = snd_soc_card_get_drvdata(card);
 	int srate, mclk, err;
diff --git a/sound/soc/tegra/tegra_sgtl5000.c b/sound/soc/tegra/tegra_sgtl5000.c
index e13b81d..dc411ba 100644
--- a/sound/soc/tegra/tegra_sgtl5000.c
+++ b/sound/soc/tegra/tegra_sgtl5000.c
@@ -36,7 +36,7 @@ static int tegra_sgtl5000_hw_params(struct snd_pcm_substream *substream,
 					struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	struct snd_soc_card *card = rtd->card;
 	struct tegra_sgtl5000 *machine = snd_soc_card_get_drvdata(card);
 	int srate, mclk;
diff --git a/sound/soc/tegra/tegra_wm8753.c b/sound/soc/tegra/tegra_wm8753.c
index f6dd790..0d653a6 100644
--- a/sound/soc/tegra/tegra_wm8753.c
+++ b/sound/soc/tegra/tegra_wm8753.c
@@ -40,7 +40,7 @@ static int tegra_wm8753_hw_params(struct snd_pcm_substream *substream,
 					struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	struct snd_soc_card *card = rtd->card;
 	struct tegra_wm8753 *machine = snd_soc_card_get_drvdata(card);
 	int srate, mclk;
diff --git a/sound/soc/tegra/tegra_wm8903.c b/sound/soc/tegra/tegra_wm8903.c
index f08d348..9b56515 100644
--- a/sound/soc/tegra/tegra_wm8903.c
+++ b/sound/soc/tegra/tegra_wm8903.c
@@ -45,7 +45,7 @@ static int tegra_wm8903_hw_params(struct snd_pcm_substream *substream,
 					struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	struct snd_soc_card *card = rtd->card;
 	struct tegra_wm8903 *machine = snd_soc_card_get_drvdata(card);
 	int srate, mclk;
@@ -143,19 +143,37 @@ static int tegra_wm8903_event_hp(struct snd_soc_dapm_widget *w,
 	return 0;
 }
 
+static int tegra_wm8903_event_int_mic(struct snd_soc_dapm_widget *w,
+				      struct snd_kcontrol *k, int event)
+{
+	struct snd_soc_dapm_context *dapm = w->dapm;
+	struct snd_soc_card *card = dapm->card;
+	struct tegra_wm8903 *machine = snd_soc_card_get_drvdata(card);
+
+	if (!gpio_is_valid(machine->gpio_int_mic_en))
+		return 0;
+
+	gpio_set_value_cansleep(machine->gpio_int_mic_en,
+				SND_SOC_DAPM_EVENT_ON(event));
+
+	return 0;
+}
+
 static const struct snd_soc_dapm_widget tegra_wm8903_dapm_widgets[] = {
 	SND_SOC_DAPM_SPK("Int Spk", tegra_wm8903_event_int_spk),
 	SND_SOC_DAPM_HP("Headphone Jack", tegra_wm8903_event_hp),
 	SND_SOC_DAPM_MIC("Mic Jack", NULL),
+	SND_SOC_DAPM_MIC("Int Mic", tegra_wm8903_event_int_mic),
 };
 
 static const struct snd_kcontrol_new tegra_wm8903_controls[] = {
 	SOC_DAPM_PIN_SWITCH("Int Spk"),
+	SOC_DAPM_PIN_SWITCH("Int Mic"),
 };
 
 static int tegra_wm8903_init(struct snd_soc_pcm_runtime *rtd)
 {
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	struct snd_soc_component *component = codec_dai->component;
 	struct snd_soc_card *card = rtd->card;
 	struct tegra_wm8903 *machine = snd_soc_card_get_drvdata(card);
@@ -187,7 +205,7 @@ static int tegra_wm8903_remove(struct snd_soc_card *card)
 {
 	struct snd_soc_pcm_runtime *rtd =
 		snd_soc_get_pcm_runtime(card, &card->dai_link[0]);
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	struct snd_soc_component *component = codec_dai->component;
 
 	wm8903_mic_detect(component, NULL, 0, 0);
diff --git a/sound/soc/tegra/trimslice.c b/sound/soc/tegra/trimslice.c
index 3f67ddd..f9834af 100644
--- a/sound/soc/tegra/trimslice.c
+++ b/sound/soc/tegra/trimslice.c
@@ -35,7 +35,7 @@ static int trimslice_asoc_hw_params(struct snd_pcm_substream *substream,
 					struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	struct snd_soc_card *card = rtd->card;
 	struct tegra_trimslice *trimslice = snd_soc_card_get_drvdata(card);
 	int srate, mclk;
diff --git a/sound/soc/ti/Kconfig b/sound/soc/ti/Kconfig
index 29f6105..c5408c1 100644
--- a/sound/soc/ti/Kconfig
+++ b/sound/soc/ti/Kconfig
@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0-only
 menu "Audio support for Texas Instruments SoCs"
-depends on DMA_OMAP || TI_EDMA || COMPILE_TEST
+depends on DMA_OMAP || TI_EDMA || TI_K3_UDMA || COMPILE_TEST
 
 config SND_SOC_TI_EDMA_PCM
 	tristate
@@ -10,6 +10,10 @@
 	tristate
 	select SND_SOC_GENERIC_DMAENGINE_PCM
 
+config SND_SOC_TI_UDMA_PCM
+	tristate
+	select SND_SOC_GENERIC_DMAENGINE_PCM
+
 comment "Texas Instruments DAI support for:"
 config SND_SOC_DAVINCI_ASP
 	tristate "daVinci Audio Serial Port (ASP) or McBSP support"
@@ -24,6 +28,7 @@
 	tristate "Multichannel Audio Serial Port (McASP) support"
 	select SND_SOC_TI_EDMA_PCM
 	select SND_SOC_TI_SDMA_PCM
+	select SND_SOC_TI_UDMA_PCM
 	help
 	  Say Y or M here if you want to have support for McASP IP found in
 	  various Texas Instruments SoCs like:
@@ -31,6 +36,7 @@
 	  - Sitara line of SoCs (AM335x, AM438x, etc)
 	  - DRA7x devices
 	  - Keystone devices
+	  - K3 devices (am654, j721e)
 
 config SND_SOC_DAVINCI_VCIF
 	tristate "daVinci Voice Interface (VCIF) support"
diff --git a/sound/soc/ti/Makefile b/sound/soc/ti/Makefile
index 08c44d5..ea48c66 100644
--- a/sound/soc/ti/Makefile
+++ b/sound/soc/ti/Makefile
@@ -3,9 +3,11 @@
 # Platform drivers
 snd-soc-ti-edma-objs := edma-pcm.o
 snd-soc-ti-sdma-objs := sdma-pcm.o
+snd-soc-ti-udma-objs := udma-pcm.o
 
 obj-$(CONFIG_SND_SOC_TI_EDMA_PCM) += snd-soc-ti-edma.o
 obj-$(CONFIG_SND_SOC_TI_SDMA_PCM) += snd-soc-ti-sdma.o
+obj-$(CONFIG_SND_SOC_TI_UDMA_PCM) += snd-soc-ti-udma.o
 
 # CPU DAI drivers
 snd-soc-davinci-asp-objs := davinci-i2s.o
diff --git a/sound/soc/ti/ams-delta.c b/sound/soc/ti/ams-delta.c
index 8e2fb81..e17cd5e 100644
--- a/sound/soc/ti/ams-delta.c
+++ b/sound/soc/ti/ams-delta.c
@@ -460,14 +460,14 @@ static void ams_delta_shutdown(struct snd_pcm_substream *substream)
 
 static int ams_delta_cx20442_init(struct snd_soc_pcm_runtime *rtd)
 {
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	struct snd_soc_card *card = rtd->card;
 	struct snd_soc_dapm_context *dapm = &card->dapm;
 	int ret;
 	/* Codec is ready, now add/activate board specific controls */
 
 	/* Store a pointer to the codec structure for tty ldisc use */
-	cx20442_codec = rtd->codec_dai->component;
+	cx20442_codec = asoc_rtd_to_codec(rtd, 0)->component;
 
 	/* Add hook switch - can be used to control the codec from userspace
 	 * even if line discipline fails */
diff --git a/sound/soc/ti/davinci-evm.c b/sound/soc/ti/davinci-evm.c
index 686b23d..2cfbeeb 100644
--- a/sound/soc/ti/davinci-evm.c
+++ b/sound/soc/ti/davinci-evm.c
@@ -54,8 +54,8 @@ static int evm_hw_params(struct snd_pcm_substream *substream,
 			 struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	struct snd_soc_card *soc_card = rtd->card;
 	int ret = 0;
 	unsigned sysclk = ((struct snd_soc_card_drvdata_davinci *)
diff --git a/sound/soc/ti/davinci-mcasp.c b/sound/soc/ti/davinci-mcasp.c
index e1e937e..734ffe9 100644
--- a/sound/soc/ti/davinci-mcasp.c
+++ b/sound/soc/ti/davinci-mcasp.c
@@ -38,6 +38,7 @@
 
 #include "edma-pcm.h"
 #include "sdma-pcm.h"
+#include "udma-pcm.h"
 #include "davinci-mcasp.h"
 
 #define MCASP_MAX_AFIFO_DEPTH	64
@@ -1764,10 +1765,8 @@ static struct davinci_mcasp_pdata *davinci_mcasp_set_pdata_from_of(
 	} else if (match) {
 		pdata = devm_kmemdup(&pdev->dev, match->data, sizeof(*pdata),
 				     GFP_KERNEL);
-		if (!pdata) {
-			ret = -ENOMEM;
-			return pdata;
-		}
+		if (!pdata)
+			return NULL;
 	} else {
 		/* control shouldn't reach here. something is wrong */
 		ret = -EINVAL;
@@ -1875,6 +1874,7 @@ static struct davinci_mcasp_pdata *davinci_mcasp_set_pdata_from_of(
 enum {
 	PCM_EDMA,
 	PCM_SDMA,
+	PCM_UDMA,
 };
 static const char *sdma_prefix = "ti,omap";
 
@@ -1912,6 +1912,8 @@ static int davinci_mcasp_get_dma_type(struct davinci_mcasp *mcasp)
 	dev_dbg(mcasp->dev, "DMA controller compatible = \"%s\"\n", tmp);
 	if (!strncmp(tmp, sdma_prefix, strlen(sdma_prefix)))
 		return PCM_SDMA;
+	else if (strstr(tmp, "udmap"))
+		return PCM_UDMA;
 
 	return PCM_EDMA;
 }
@@ -2371,6 +2373,9 @@ static int davinci_mcasp_probe(struct platform_device *pdev)
 	case PCM_SDMA:
 		ret = sdma_pcm_platform_register(&pdev->dev, "tx", "rx");
 		break;
+	case PCM_UDMA:
+		ret = udma_pcm_platform_register(&pdev->dev);
+		break;
 	default:
 		dev_err(&pdev->dev, "No DMA controller found (%d)\n", ret);
 	case -EPROBE_DEFER:
diff --git a/sound/soc/ti/davinci-vcif.c b/sound/soc/ti/davinci-vcif.c
index c84650e..ee4d3ef 100644
--- a/sound/soc/ti/davinci-vcif.c
+++ b/sound/soc/ti/davinci-vcif.c
@@ -43,7 +43,7 @@ static void davinci_vcif_start(struct snd_pcm_substream *substream)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct davinci_vcif_dev *davinci_vcif_dev =
-			snd_soc_dai_get_drvdata(rtd->cpu_dai);
+			snd_soc_dai_get_drvdata(asoc_rtd_to_cpu(rtd, 0));
 	struct davinci_vc *davinci_vc = davinci_vcif_dev->davinci_vc;
 	u32 w;
 
@@ -62,7 +62,7 @@ static void davinci_vcif_stop(struct snd_pcm_substream *substream)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct davinci_vcif_dev *davinci_vcif_dev =
-			snd_soc_dai_get_drvdata(rtd->cpu_dai);
+			snd_soc_dai_get_drvdata(asoc_rtd_to_cpu(rtd, 0));
 	struct davinci_vc *davinci_vc = davinci_vcif_dev->davinci_vc;
 	u32 w;
 
diff --git a/sound/soc/ti/n810.c b/sound/soc/ti/n810.c
index 3ad2b6d..a1672b4 100644
--- a/sound/soc/ti/n810.c
+++ b/sound/soc/ti/n810.c
@@ -101,7 +101,7 @@ static int n810_hw_params(struct snd_pcm_substream *substream,
 	struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	int err;
 
 	/* Set the codec system clock for DAC and ADC */
diff --git a/sound/soc/ti/omap-abe-twl6040.c b/sound/soc/ti/omap-abe-twl6040.c
index 6d564ab..61e45fe 100644
--- a/sound/soc/ti/omap-abe-twl6040.c
+++ b/sound/soc/ti/omap-abe-twl6040.c
@@ -46,7 +46,7 @@ static int omap_abe_hw_params(struct snd_pcm_substream *substream,
 	struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	struct snd_soc_card *card = rtd->card;
 	struct abe_twl6040 *priv = snd_soc_card_get_drvdata(card);
 	int clk_id, freq;
@@ -78,7 +78,7 @@ static int omap_abe_dmic_hw_params(struct snd_pcm_substream *substream,
 	struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	int ret = 0;
 
 	ret = snd_soc_dai_set_sysclk(cpu_dai, OMAP_DMIC_SYSCLK_PAD_CLKS,
@@ -166,7 +166,7 @@ static const struct snd_soc_dapm_route audio_map[] = {
 
 static int omap_abe_twl6040_init(struct snd_soc_pcm_runtime *rtd)
 {
-	struct snd_soc_component *component = rtd->codec_dai->component;
+	struct snd_soc_component *component = asoc_rtd_to_codec(rtd, 0)->component;
 	struct snd_soc_card *card = rtd->card;
 	struct abe_twl6040 *priv = snd_soc_card_get_drvdata(card);
 	int hs_trim;
diff --git a/sound/soc/ti/omap-mcbsp-st.c b/sound/soc/ti/omap-mcbsp-st.c
index 1a3fe85..5a32b54 100644
--- a/sound/soc/ti/omap-mcbsp-st.c
+++ b/sound/soc/ti/omap-mcbsp-st.c
@@ -489,7 +489,7 @@ OMAP_MCBSP_ST_CONTROLS(3);
 
 int omap_mcbsp_st_add_controls(struct snd_soc_pcm_runtime *rtd, int port_id)
 {
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai);
 
 	if (!mcbsp->st_data) {
diff --git a/sound/soc/ti/omap-mcbsp.c b/sound/soc/ti/omap-mcbsp.c
index 302d5c4..3d41ca2 100644
--- a/sound/soc/ti/omap-mcbsp.c
+++ b/sound/soc/ti/omap-mcbsp.c
@@ -737,7 +737,7 @@ static void omap_mcbsp_set_threshold(struct snd_pcm_substream *substream,
 		unsigned int packet_size)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai);
 	int words;
 
@@ -902,7 +902,7 @@ static snd_pcm_sframes_t omap_mcbsp_dai_delay(
 			struct snd_soc_dai *dai)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai);
 	u16 fifo_use;
 	snd_pcm_sframes_t delay;
diff --git a/sound/soc/ti/omap-mcpdm.c b/sound/soc/ti/omap-mcpdm.c
index d7ac4df..f2dbade 100644
--- a/sound/soc/ti/omap-mcpdm.c
+++ b/sound/soc/ti/omap-mcpdm.c
@@ -532,7 +532,7 @@ static const struct snd_soc_component_driver omap_mcpdm_component = {
 void omap_mcpdm_configure_dn_offsets(struct snd_soc_pcm_runtime *rtd,
 				    u8 rx1, u8 rx2)
 {
-	struct omap_mcpdm *mcpdm = snd_soc_dai_get_drvdata(rtd->cpu_dai);
+	struct omap_mcpdm *mcpdm = snd_soc_dai_get_drvdata(asoc_rtd_to_cpu(rtd, 0));
 
 	mcpdm->dn_rx_offset = MCPDM_DNOFST_RX1(rx1) | MCPDM_DNOFST_RX2(rx2);
 }
diff --git a/sound/soc/ti/omap3pandora.c b/sound/soc/ti/omap3pandora.c
index 545f8da..b041463 100644
--- a/sound/soc/ti/omap3pandora.c
+++ b/sound/soc/ti/omap3pandora.c
@@ -32,8 +32,8 @@ static int omap3pandora_hw_params(struct snd_pcm_substream *substream,
 	struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	int ret;
 
 	/* Set the codec system clock for DAC and ADC */
diff --git a/sound/soc/ti/osk5912.c b/sound/soc/ti/osk5912.c
index 1ca466b..e01485c 100644
--- a/sound/soc/ti/osk5912.c
+++ b/sound/soc/ti/osk5912.c
@@ -39,7 +39,7 @@ static int osk_hw_params(struct snd_pcm_substream *substream,
 			 struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	int err;
 
 	/* Set the codec system clock for DAC and ADC */
diff --git a/sound/soc/ti/rx51.c b/sound/soc/ti/rx51.c
index fdb0dc8..2a714a0 100644
--- a/sound/soc/ti/rx51.c
+++ b/sound/soc/ti/rx51.c
@@ -103,7 +103,7 @@ static int rx51_hw_params(struct snd_pcm_substream *substream,
 	struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 
 	/* Set the codec system clock for DAC and ADC */
 	return snd_soc_dai_set_sysclk(codec_dai, 0, 19200000,
diff --git a/sound/soc/ti/udma-pcm.c b/sound/soc/ti/udma-pcm.c
new file mode 100644
index 0000000..39830ca
--- /dev/null
+++ b/sound/soc/ti/udma-pcm.c
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com
+ *  Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
+ */
+
+#include <linux/module.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/dmaengine_pcm.h>
+
+#include "udma-pcm.h"
+
+static const struct snd_pcm_hardware udma_pcm_hardware = {
+	.info			= SNDRV_PCM_INFO_MMAP |
+				  SNDRV_PCM_INFO_MMAP_VALID |
+				  SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME |
+				  SNDRV_PCM_INFO_NO_PERIOD_WAKEUP |
+				  SNDRV_PCM_INFO_INTERLEAVED,
+	.buffer_bytes_max	= SIZE_MAX,
+	.period_bytes_min	= 32,
+	.period_bytes_max	= SZ_64K,
+	.periods_min		= 2,
+	.periods_max		= UINT_MAX,
+};
+
+static const struct snd_dmaengine_pcm_config udma_dmaengine_pcm_config = {
+	.pcm_hardware = &udma_pcm_hardware,
+	.prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config,
+};
+
+int udma_pcm_platform_register(struct device *dev)
+{
+	return devm_snd_dmaengine_pcm_register(dev, &udma_dmaengine_pcm_config,
+					       0);
+}
+EXPORT_SYMBOL_GPL(udma_pcm_platform_register);
+
+MODULE_AUTHOR("Peter Ujfalusi <peter.ujfalusi@ti.com>");
+MODULE_DESCRIPTION("UDMA PCM ASoC platform driver");
+MODULE_LICENSE("GPL v2");
diff --git a/sound/soc/ti/udma-pcm.h b/sound/soc/ti/udma-pcm.h
new file mode 100644
index 0000000..54111e7
--- /dev/null
+++ b/sound/soc/ti/udma-pcm.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *  Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com
+ */
+
+#ifndef __UDMA_PCM_H__
+#define __UDMA_PCM_H__
+
+#if IS_ENABLED(CONFIG_SND_SOC_TI_UDMA_PCM)
+int udma_pcm_platform_register(struct device *dev);
+#else
+static inline int udma_pcm_platform_register(struct device *dev)
+{
+	return 0;
+}
+#endif /* CONFIG_SND_SOC_TI_UDMA_PCM */
+
+#endif /* __UDMA_PCM_H__ */
diff --git a/sound/soc/txx9/txx9aclc.c b/sound/soc/txx9/txx9aclc.c
index 985487c..4b1cd4d 100644
--- a/sound/soc/txx9/txx9aclc.c
+++ b/sound/soc/txx9/txx9aclc.c
@@ -269,7 +269,7 @@ static int txx9aclc_pcm_new(struct snd_soc_component *component,
 			    struct snd_soc_pcm_runtime *rtd)
 {
 	struct snd_card *card = rtd->card->snd_card;
-	struct snd_soc_dai *dai = rtd->cpu_dai;
+	struct snd_soc_dai *dai = asoc_rtd_to_cpu(rtd, 0);
 	struct snd_pcm *pcm = rtd->pcm;
 	struct platform_device *pdev = to_platform_device(component->dev);
 	struct txx9aclc_soc_device *dev;
diff --git a/sound/soc/uniphier/aio-compress.c b/sound/soc/uniphier/aio-compress.c
index 17f773a..232d3cc 100644
--- a/sound/soc/uniphier/aio-compress.c
+++ b/sound/soc/uniphier/aio-compress.c
@@ -23,7 +23,7 @@ static int uniphier_aio_comprdma_new(struct snd_soc_pcm_runtime *rtd)
 {
 	struct snd_compr *compr = rtd->compr;
 	struct device *dev = compr->card->dev;
-	struct uniphier_aio *aio = uniphier_priv(rtd->cpu_dai);
+	struct uniphier_aio *aio = uniphier_priv(asoc_rtd_to_cpu(rtd, 0));
 	struct uniphier_aio_sub *sub = &aio->sub[compr->direction];
 	size_t size = AUD_RING_SIZE;
 	int dma_dir = DMA_FROM_DEVICE, ret;
@@ -56,7 +56,7 @@ static int uniphier_aio_comprdma_free(struct snd_soc_pcm_runtime *rtd)
 {
 	struct snd_compr *compr = rtd->compr;
 	struct device *dev = compr->card->dev;
-	struct uniphier_aio *aio = uniphier_priv(rtd->cpu_dai);
+	struct uniphier_aio *aio = uniphier_priv(asoc_rtd_to_cpu(rtd, 0));
 	struct uniphier_aio_sub *sub = &aio->sub[compr->direction];
 	int dma_dir = DMA_FROM_DEVICE;
 
@@ -73,7 +73,7 @@ static int uniphier_aio_comprdma_free(struct snd_soc_pcm_runtime *rtd)
 static int uniphier_aio_compr_open(struct snd_compr_stream *cstream)
 {
 	struct snd_soc_pcm_runtime *rtd = cstream->private_data;
-	struct uniphier_aio *aio = uniphier_priv(rtd->cpu_dai);
+	struct uniphier_aio *aio = uniphier_priv(asoc_rtd_to_cpu(rtd, 0));
 	struct uniphier_aio_sub *sub = &aio->sub[cstream->direction];
 	int ret;
 
@@ -98,7 +98,7 @@ static int uniphier_aio_compr_open(struct snd_compr_stream *cstream)
 static int uniphier_aio_compr_free(struct snd_compr_stream *cstream)
 {
 	struct snd_soc_pcm_runtime *rtd = cstream->private_data;
-	struct uniphier_aio *aio = uniphier_priv(rtd->cpu_dai);
+	struct uniphier_aio *aio = uniphier_priv(asoc_rtd_to_cpu(rtd, 0));
 	struct uniphier_aio_sub *sub = &aio->sub[cstream->direction];
 	int ret;
 
@@ -118,7 +118,7 @@ static int uniphier_aio_compr_get_params(struct snd_compr_stream *cstream,
 					 struct snd_codec *params)
 {
 	struct snd_soc_pcm_runtime *rtd = cstream->private_data;
-	struct uniphier_aio *aio = uniphier_priv(rtd->cpu_dai);
+	struct uniphier_aio *aio = uniphier_priv(asoc_rtd_to_cpu(rtd, 0));
 	struct uniphier_aio_sub *sub = &aio->sub[cstream->direction];
 
 	*params = sub->cparams.codec;
@@ -130,7 +130,7 @@ static int uniphier_aio_compr_set_params(struct snd_compr_stream *cstream,
 					 struct snd_compr_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = cstream->private_data;
-	struct uniphier_aio *aio = uniphier_priv(rtd->cpu_dai);
+	struct uniphier_aio *aio = uniphier_priv(asoc_rtd_to_cpu(rtd, 0));
 	struct uniphier_aio_sub *sub = &aio->sub[cstream->direction];
 	struct device *dev = &aio->chip->pdev->dev;
 	int ret;
@@ -165,7 +165,7 @@ static int uniphier_aio_compr_set_params(struct snd_compr_stream *cstream,
 static int uniphier_aio_compr_hw_free(struct snd_compr_stream *cstream)
 {
 	struct snd_soc_pcm_runtime *rtd = cstream->private_data;
-	struct uniphier_aio *aio = uniphier_priv(rtd->cpu_dai);
+	struct uniphier_aio *aio = uniphier_priv(asoc_rtd_to_cpu(rtd, 0));
 	struct uniphier_aio_sub *sub = &aio->sub[cstream->direction];
 
 	sub->setting = 0;
@@ -177,7 +177,7 @@ static int uniphier_aio_compr_prepare(struct snd_compr_stream *cstream)
 {
 	struct snd_soc_pcm_runtime *rtd = cstream->private_data;
 	struct snd_compr_runtime *runtime = cstream->runtime;
-	struct uniphier_aio *aio = uniphier_priv(rtd->cpu_dai);
+	struct uniphier_aio *aio = uniphier_priv(asoc_rtd_to_cpu(rtd, 0));
 	struct uniphier_aio_sub *sub = &aio->sub[cstream->direction];
 	int bytes = runtime->fragment_size;
 	unsigned long flags;
@@ -215,7 +215,7 @@ static int uniphier_aio_compr_trigger(struct snd_compr_stream *cstream,
 {
 	struct snd_soc_pcm_runtime *rtd = cstream->private_data;
 	struct snd_compr_runtime *runtime = cstream->runtime;
-	struct uniphier_aio *aio = uniphier_priv(rtd->cpu_dai);
+	struct uniphier_aio *aio = uniphier_priv(asoc_rtd_to_cpu(rtd, 0));
 	struct uniphier_aio_sub *sub = &aio->sub[cstream->direction];
 	struct device *dev = &aio->chip->pdev->dev;
 	int bytes = runtime->fragment_size, ret = 0;
@@ -248,7 +248,7 @@ static int uniphier_aio_compr_pointer(struct snd_compr_stream *cstream,
 {
 	struct snd_soc_pcm_runtime *rtd = cstream->private_data;
 	struct snd_compr_runtime *runtime = cstream->runtime;
-	struct uniphier_aio *aio = uniphier_priv(rtd->cpu_dai);
+	struct uniphier_aio *aio = uniphier_priv(asoc_rtd_to_cpu(rtd, 0));
 	struct uniphier_aio_sub *sub = &aio->sub[cstream->direction];
 	int bytes = runtime->fragment_size;
 	unsigned long flags;
@@ -322,7 +322,7 @@ static int uniphier_aio_compr_copy(struct snd_compr_stream *cstream,
 	struct snd_soc_pcm_runtime *rtd = cstream->private_data;
 	struct snd_compr_runtime *runtime = cstream->runtime;
 	struct device *carddev = rtd->compr->card->dev;
-	struct uniphier_aio *aio = uniphier_priv(rtd->cpu_dai);
+	struct uniphier_aio *aio = uniphier_priv(asoc_rtd_to_cpu(rtd, 0));
 	struct uniphier_aio_sub *sub = &aio->sub[cstream->direction];
 	size_t cnt = min_t(size_t, count, aio_rb_space_to_end(sub) / 2);
 	int bytes = runtime->fragment_size;
diff --git a/sound/soc/uniphier/aio-dma.c b/sound/soc/uniphier/aio-dma.c
index da83423..4bbcb00 100644
--- a/sound/soc/uniphier/aio-dma.c
+++ b/sound/soc/uniphier/aio-dma.c
@@ -109,7 +109,7 @@ static int uniphier_aiodma_prepare(struct snd_soc_component *component,
 {
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
-	struct uniphier_aio *aio = uniphier_priv(rtd->cpu_dai);
+	struct uniphier_aio *aio = uniphier_priv(asoc_rtd_to_cpu(rtd, 0));
 	struct uniphier_aio_sub *sub = &aio->sub[substream->stream];
 	int bytes = runtime->period_size *
 		runtime->channels * samples_to_bytes(runtime, 1);
@@ -136,7 +136,7 @@ static int uniphier_aiodma_trigger(struct snd_soc_component *component,
 {
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
-	struct uniphier_aio *aio = uniphier_priv(rtd->cpu_dai);
+	struct uniphier_aio *aio = uniphier_priv(asoc_rtd_to_cpu(rtd, 0));
 	struct uniphier_aio_sub *sub = &aio->sub[substream->stream];
 	struct device *dev = &aio->chip->pdev->dev;
 	int bytes = runtime->period_size *
@@ -172,7 +172,7 @@ static snd_pcm_uframes_t uniphier_aiodma_pointer(
 {
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
-	struct uniphier_aio *aio = uniphier_priv(rtd->cpu_dai);
+	struct uniphier_aio *aio = uniphier_priv(asoc_rtd_to_cpu(rtd, 0));
 	struct uniphier_aio_sub *sub = &aio->sub[substream->stream];
 	int bytes = runtime->period_size *
 		runtime->channels * samples_to_bytes(runtime, 1);
diff --git a/sound/soc/ux500/mop500_ab8500.c b/sound/soc/ux500/mop500_ab8500.c
index 7765508..6aaa198 100644
--- a/sound/soc/ux500/mop500_ab8500.c
+++ b/sound/soc/ux500/mop500_ab8500.c
@@ -215,8 +215,8 @@ static int mop500_ab8500_hw_params(struct snd_pcm_substream *substream,
 			struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	struct device *dev = rtd->card->dev;
 	unsigned int fmt;
 	int channels, ret = 0, driver_mode, slots;
@@ -339,7 +339,7 @@ static int mop500_ab8500_hw_params(struct snd_pcm_substream *substream,
 static int mop500_ab8500_hw_free(struct snd_pcm_substream *substream)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 
 	mutex_lock(&mop500_ab8500_params_lock);
 	__clear_bit(cpu_dai->id, &mop500_ab8500_usage);
diff --git a/sound/soc/ux500/ux500_pcm.c b/sound/soc/ux500/ux500_pcm.c
index 9445dbe..39b96c13 100644
--- a/sound/soc/ux500/ux500_pcm.c
+++ b/sound/soc/ux500/ux500_pcm.c
@@ -46,7 +46,7 @@ static const struct snd_pcm_hardware ux500_pcm_hw = {
 static struct dma_chan *ux500_pcm_request_chan(struct snd_soc_pcm_runtime *rtd,
 	struct snd_pcm_substream *substream)
 {
-	struct snd_soc_dai *dai = rtd->cpu_dai;
+	struct snd_soc_dai *dai = asoc_rtd_to_cpu(rtd, 0);
 	u16 per_data_width, mem_data_width;
 	struct stedma40_chan_cfg *dma_cfg;
 	struct ux500_msp_dma_params *dma_params;
@@ -86,7 +86,7 @@ static int ux500_pcm_prepare_slave_config(struct snd_pcm_substream *substream,
 		struct dma_slave_config *slave_config)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct msp_i2s_platform_data *pdata = rtd->cpu_dai->dev->platform_data;
+	struct msp_i2s_platform_data *pdata = asoc_rtd_to_cpu(rtd, 0)->dev->platform_data;
 	struct snd_dmaengine_dai_dma_data *snd_dma_params;
 	struct ux500_msp_dma_params *ste_dma_params;
 	dma_addr_t dma_addr;
@@ -94,11 +94,11 @@ static int ux500_pcm_prepare_slave_config(struct snd_pcm_substream *substream,
 
 	if (pdata) {
 		ste_dma_params =
-			snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+			snd_soc_dai_get_dma_data(asoc_rtd_to_cpu(rtd, 0), substream);
 		dma_addr = ste_dma_params->tx_rx_addr;
 	} else {
 		snd_dma_params =
-			snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+			snd_soc_dai_get_dma_data(asoc_rtd_to_cpu(rtd, 0), substream);
 		dma_addr = snd_dma_params->addr;
 	}
 
diff --git a/sound/soc/xtensa/xtfpga-i2s.c b/sound/soc/xtensa/xtfpga-i2s.c
index bcf442f..68af217 100644
--- a/sound/soc/xtensa/xtfpga-i2s.c
+++ b/sound/soc/xtensa/xtfpga-i2s.c
@@ -373,7 +373,7 @@ static int xtfpga_pcm_open(struct snd_soc_component *component,
 	void *p;
 
 	snd_soc_set_runtime_hwparams(substream, &xtfpga_pcm_hardware);
-	p = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+	p = snd_soc_dai_get_dma_data(asoc_rtd_to_cpu(rtd, 0), substream);
 	runtime->private_data = p;
 
 	return 0;
diff --git a/sound/soc/zte/zx-spdif.c b/sound/soc/zte/zx-spdif.c
index 60382ec..a3a07c0 100644
--- a/sound/soc/zte/zx-spdif.c
+++ b/sound/soc/zte/zx-spdif.c
@@ -322,7 +322,6 @@ static int zx_spdif_probe(struct platform_device *pdev)
 	zx_spdif->mapbase = res->start;
 	zx_spdif->reg_base = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(zx_spdif->reg_base)) {
-		dev_err(&pdev->dev, "ioremap failed!\n");
 		return PTR_ERR(zx_spdif->reg_base);
 	}
 
diff --git a/sound/soc/zte/zx-tdm.c b/sound/soc/zte/zx-tdm.c
index 0e5a05b2..4f78718 100644
--- a/sound/soc/zte/zx-tdm.c
+++ b/sound/soc/zte/zx-tdm.c
@@ -371,7 +371,6 @@ static struct snd_soc_dai_driver zx_tdm_dai = {
 
 static int zx_tdm_probe(struct platform_device *pdev)
 {
-	struct device *dev = &pdev->dev;
 	struct of_phandle_args out_args;
 	unsigned int dma_reg_offset;
 	struct zx_tdm_info *zx_tdm;
@@ -384,7 +383,7 @@ static int zx_tdm_probe(struct platform_device *pdev)
 	if (!zx_tdm)
 		return -ENOMEM;
 
-	zx_tdm->dev = dev;
+	zx_tdm->dev = &pdev->dev;
 
 	zx_tdm->dai_wclk = devm_clk_get(&pdev->dev, "wclk");
 	if (IS_ERR(zx_tdm->dai_wclk)) {
diff --git a/sound/usb/Makefile b/sound/usb/Makefile
index 78edd7d..5603102 100644
--- a/sound/usb/Makefile
+++ b/sound/usb/Makefile
@@ -13,6 +13,7 @@
 			mixer_scarlett.o \
 			mixer_scarlett_gen2.o \
 			mixer_us16x08.o \
+			mixer_s1810c.o \
 			pcm.o \
 			power.o \
 			proc.o \
diff --git a/sound/usb/card.c b/sound/usb/card.c
index 827fb0b..fd6fd17 100644
--- a/sound/usb/card.c
+++ b/sound/usb/card.c
@@ -72,6 +72,7 @@ static int device_setup[SNDRV_CARDS]; /* device parameter for this card */
 static bool ignore_ctl_error;
 static bool autoclock = true;
 static char *quirk_alias[SNDRV_CARDS];
+static char *delayed_register[SNDRV_CARDS];
 
 bool snd_usb_use_vmalloc = true;
 bool snd_usb_skip_validation;
@@ -95,6 +96,8 @@ module_param(autoclock, bool, 0444);
 MODULE_PARM_DESC(autoclock, "Enable auto-clock selection for UAC2 devices (default: yes).");
 module_param_array(quirk_alias, charp, NULL, 0444);
 MODULE_PARM_DESC(quirk_alias, "Quirk aliases, e.g. 0123abcd:5678beef.");
+module_param_array(delayed_register, charp, NULL, 0444);
+MODULE_PARM_DESC(delayed_register, "Quirk for delayed registration, given by id:iface, e.g. 0123abcd:4.");
 module_param_named(use_vmalloc, snd_usb_use_vmalloc, bool, 0444);
 MODULE_PARM_DESC(use_vmalloc, "Use vmalloc for PCM intermediate buffers (default: yes).");
 module_param_named(skip_validation, snd_usb_skip_validation, bool, 0444);
@@ -525,6 +528,21 @@ static bool get_alias_id(struct usb_device *dev, unsigned int *id)
 	return false;
 }
 
+static bool check_delayed_register_option(struct snd_usb_audio *chip, int iface)
+{
+	int i;
+	unsigned int id, inum;
+
+	for (i = 0; i < ARRAY_SIZE(delayed_register); i++) {
+		if (delayed_register[i] &&
+		    sscanf(delayed_register[i], "%x:%x", &id, &inum) == 2 &&
+		    id == chip->usb_id)
+			return inum != iface;
+	}
+
+	return false;
+}
+
 static const struct usb_device_id usb_audio_ids[]; /* defined below */
 
 /* look for the corresponding quirk */
@@ -662,10 +680,22 @@ static int usb_audio_probe(struct usb_interface *intf,
 			goto __error;
 	}
 
-	/* we are allowed to call snd_card_register() many times */
-	err = snd_card_register(chip->card);
-	if (err < 0)
-		goto __error;
+	if (chip->need_delayed_register) {
+		dev_info(&dev->dev,
+			 "Found post-registration device assignment: %08x:%02x\n",
+			 chip->usb_id, ifnum);
+		chip->need_delayed_register = false; /* clear again */
+	}
+
+	/* we are allowed to call snd_card_register() many times, but first
+	 * check to see if a device needs to skip it or do anything special
+	 */
+	if (!snd_usb_registration_quirk(chip, ifnum) &&
+	    !check_delayed_register_option(chip, ifnum)) {
+		err = snd_card_register(chip->card);
+		if (err < 0)
+			goto __error;
+	}
 
 	if (quirk && quirk->shares_media_device) {
 		/* don't want to fail when snd_media_device_create() fails */
diff --git a/sound/usb/clock.c b/sound/usb/clock.c
index a48313d..b118cf9 100644
--- a/sound/usb/clock.c
+++ b/sound/usb/clock.c
@@ -151,16 +151,15 @@ static int uac_clock_selector_set_val(struct snd_usb_audio *chip, int selector_i
 	return ret;
 }
 
-/*
- * Assume the clock is valid if clock source supports only one single sample
- * rate, the terminal is connected directly to it (there is no clock selector)
- * and clock type is internal. This is to deal with some Denon DJ controllers
- * that always reports that clock is invalid.
- */
 static bool uac_clock_source_is_valid_quirk(struct snd_usb_audio *chip,
 					    struct audioformat *fmt,
 					    int source_id)
 {
+	bool ret = false;
+	int count;
+	unsigned char data;
+	struct usb_device *dev = chip->dev;
+
 	if (fmt->protocol == UAC_VERSION_2) {
 		struct uac_clock_source_descriptor *cs_desc =
 			snd_usb_find_clock_source(chip->ctrl_intf, source_id);
@@ -168,13 +167,51 @@ static bool uac_clock_source_is_valid_quirk(struct snd_usb_audio *chip,
 		if (!cs_desc)
 			return false;
 
-		return (fmt->nr_rates == 1 &&
-			(fmt->clock & 0xff) == cs_desc->bClockID &&
-			(cs_desc->bmAttributes & 0x3) !=
-				UAC_CLOCK_SOURCE_TYPE_EXT);
+		/*
+		 * Assume the clock is valid if clock source supports only one
+		 * single sample rate, the terminal is connected directly to it
+		 * (there is no clock selector) and clock type is internal.
+		 * This is to deal with some Denon DJ controllers that always
+		 * reports that clock is invalid.
+		 */
+		if (fmt->nr_rates == 1 &&
+		    (fmt->clock & 0xff) == cs_desc->bClockID &&
+		    (cs_desc->bmAttributes & 0x3) !=
+				UAC_CLOCK_SOURCE_TYPE_EXT)
+			return true;
 	}
 
-	return false;
+	/*
+	 * MOTU MicroBook IIc
+	 * Sample rate changes takes more than 2 seconds for this device. Clock
+	 * validity request returns false during that period.
+	 */
+	if (chip->usb_id == USB_ID(0x07fd, 0x0004)) {
+		count = 0;
+
+		while ((!ret) && (count < 50)) {
+			int err;
+
+			msleep(100);
+
+			err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR,
+					      USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
+					      UAC2_CS_CONTROL_CLOCK_VALID << 8,
+					      snd_usb_ctrl_intf(chip) | (source_id << 8),
+					      &data, sizeof(data));
+			if (err < 0) {
+				dev_warn(&dev->dev,
+					 "%s(): cannot get clock validity for id %d\n",
+					   __func__, source_id);
+				return false;
+			}
+
+			ret = !!data;
+			count++;
+		}
+	}
+
+	return ret;
 }
 
 static bool uac_clock_source_is_valid(struct snd_usb_audio *chip,
diff --git a/sound/usb/format.c b/sound/usb/format.c
index 9f5cb4e..50e1874 100644
--- a/sound/usb/format.c
+++ b/sound/usb/format.c
@@ -247,6 +247,36 @@ static int parse_audio_format_rates_v1(struct snd_usb_audio *chip, struct audiof
 	return 0;
 }
 
+
+/*
+ * Presonus Studio 1810c supports a limited set of sampling
+ * rates per altsetting but reports the full set each time.
+ * If we don't filter out the unsupported rates and attempt
+ * to configure the card, it will hang refusing to do any
+ * further audio I/O until a hard reset is performed.
+ *
+ * The list of supported rates per altsetting (set of available
+ * I/O channels) is described in the owner's manual, section 2.2.
+ */
+static bool s1810c_valid_sample_rate(struct audioformat *fp,
+				     unsigned int rate)
+{
+	switch (fp->altsetting) {
+	case 1:
+		/* All ADAT ports available */
+		return rate <= 48000;
+	case 2:
+		/* Half of ADAT ports available */
+		return (rate == 88200 || rate == 96000);
+	case 3:
+		/* Analog I/O only (no S/PDIF nor ADAT) */
+		return rate >= 176400;
+	default:
+		return false;
+	}
+	return false;
+}
+
 /*
  * Helper function to walk the array of sample rate triplets reported by
  * the device. The problem is that we need to parse whole array first to
@@ -283,6 +313,12 @@ static int parse_uac2_sample_rate_range(struct snd_usb_audio *chip,
 		}
 
 		for (rate = min; rate <= max; rate += res) {
+
+			/* Filter out invalid rates on Presonus Studio 1810c */
+			if (chip->usb_id == USB_ID(0x0194f, 0x010c) &&
+			    !s1810c_valid_sample_rate(fp, rate))
+				goto skip_rate;
+
 			if (fp->rate_table)
 				fp->rate_table[nr_rates] = rate;
 			if (!fp->rate_min || rate < fp->rate_min)
@@ -297,6 +333,7 @@ static int parse_uac2_sample_rate_range(struct snd_usb_audio *chip,
 				break;
 			}
 
+skip_rate:
 			/* avoid endless loop */
 			if (res == 0)
 				break;
diff --git a/sound/usb/midi.c b/sound/usb/midi.c
index 392e5fd..047b905 100644
--- a/sound/usb/midi.c
+++ b/sound/usb/midi.c
@@ -91,7 +91,7 @@ struct usb_ms_endpoint_descriptor {
 	__u8  bDescriptorType;
 	__u8  bDescriptorSubtype;
 	__u8  bNumEmbMIDIJack;
-	__u8  baAssocJackID[0];
+	__u8  baAssocJackID[];
 } __attribute__ ((packed));
 
 struct snd_usb_midi_in_endpoint;
@@ -1826,6 +1826,28 @@ static int snd_usbmidi_create_endpoints(struct snd_usb_midi *umidi,
 	return 0;
 }
 
+static struct usb_ms_endpoint_descriptor *find_usb_ms_endpoint_descriptor(
+					struct usb_host_endpoint *hostep)
+{
+	unsigned char *extra = hostep->extra;
+	int extralen = hostep->extralen;
+
+	while (extralen > 3) {
+		struct usb_ms_endpoint_descriptor *ms_ep =
+				(struct usb_ms_endpoint_descriptor *)extra;
+
+		if (ms_ep->bLength > 3 &&
+		    ms_ep->bDescriptorType == USB_DT_CS_ENDPOINT &&
+		    ms_ep->bDescriptorSubtype == UAC_MS_GENERAL)
+			return ms_ep;
+		if (!extra[0])
+			break;
+		extralen -= extra[0];
+		extra += extra[0];
+	}
+	return NULL;
+}
+
 /*
  * Returns MIDIStreaming device capabilities.
  */
@@ -1863,11 +1885,8 @@ static int snd_usbmidi_get_ms_info(struct snd_usb_midi *umidi,
 		ep = get_ep_desc(hostep);
 		if (!usb_endpoint_xfer_bulk(ep) && !usb_endpoint_xfer_int(ep))
 			continue;
-		ms_ep = (struct usb_ms_endpoint_descriptor *)hostep->extra;
-		if (hostep->extralen < 4 ||
-		    ms_ep->bLength < 4 ||
-		    ms_ep->bDescriptorType != USB_DT_CS_ENDPOINT ||
-		    ms_ep->bDescriptorSubtype != UAC_MS_GENERAL)
+		ms_ep = find_usb_ms_endpoint_descriptor(hostep);
+		if (!ms_ep)
 			continue;
 		if (usb_endpoint_dir_out(ep)) {
 			if (endpoints[epidx].out_ep) {
diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c
index 81b2db0..e7b9040 100644
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -292,6 +292,11 @@ static int uac2_ctl_value_size(int val_type)
  * retrieve a mixer value
  */
 
+static inline int mixer_ctrl_intf(struct usb_mixer_interface *mixer)
+{
+	return get_iface_desc(mixer->hostif)->bInterfaceNumber;
+}
+
 static int get_ctl_value_v1(struct usb_mixer_elem_info *cval, int request,
 			    int validx, int *value_ret)
 {
@@ -306,7 +311,7 @@ static int get_ctl_value_v1(struct usb_mixer_elem_info *cval, int request,
 		return -EIO;
 
 	while (timeout-- > 0) {
-		idx = snd_usb_ctrl_intf(chip) | (cval->head.id << 8);
+		idx = mixer_ctrl_intf(cval->head.mixer) | (cval->head.id << 8);
 		err = snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0), request,
 				      USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
 				      validx, idx, buf, val_len);
@@ -354,7 +359,7 @@ static int get_ctl_value_v2(struct usb_mixer_elem_info *cval, int request,
 	if (ret)
 		goto error;
 
-	idx = snd_usb_ctrl_intf(chip) | (cval->head.id << 8);
+	idx = mixer_ctrl_intf(cval->head.mixer) | (cval->head.id << 8);
 	ret = snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0), bRequest,
 			      USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
 			      validx, idx, buf, size);
@@ -479,7 +484,7 @@ int snd_usb_mixer_set_ctl_value(struct usb_mixer_elem_info *cval,
 		return -EIO;
 
 	while (timeout-- > 0) {
-		idx = snd_usb_ctrl_intf(chip) | (cval->head.id << 8);
+		idx = mixer_ctrl_intf(cval->head.mixer) | (cval->head.id << 8);
 		err = snd_usb_ctl_msg(chip->dev,
 				      usb_sndctrlpipe(chip->dev, 0), request,
 				      USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_OUT,
@@ -901,6 +906,12 @@ static int parse_term_effect_unit(struct mixer_build *state,
 				  struct usb_audio_term *term,
 				  void *p1, int id)
 {
+	struct uac2_effect_unit_descriptor *d = p1;
+	int err;
+
+	err = __check_input_term(state, d->bSourceID, term);
+	if (err < 0)
+		return err;
 	term->type = UAC3_EFFECT_UNIT << 16; /* virtual type */
 	term->id = id;
 	return 0;
@@ -1203,7 +1214,7 @@ static int get_min_max_with_quirks(struct usb_mixer_elem_info *cval,
 		    get_ctl_value(cval, UAC_GET_MIN, (cval->control << 8) | minchn, &cval->min) < 0) {
 			usb_audio_err(cval->head.mixer->chip,
 				      "%d:%d: cannot get min/max values for control %d (id %d)\n",
-				   cval->head.id, snd_usb_ctrl_intf(cval->head.mixer->chip),
+				   cval->head.id, mixer_ctrl_intf(cval->head.mixer),
 							       cval->control, cval->head.id);
 			return -EINVAL;
 		}
@@ -1422,7 +1433,7 @@ static int mixer_ctl_connector_get(struct snd_kcontrol *kcontrol,
 	if (ret)
 		goto error;
 
-	idx = snd_usb_ctrl_intf(chip) | (cval->head.id << 8);
+	idx = mixer_ctrl_intf(cval->head.mixer) | (cval->head.id << 8);
 	if (cval->head.mixer->protocol == UAC_VERSION_2) {
 		struct uac2_connectors_ctl_blk uac2_conn;
 
@@ -1446,7 +1457,7 @@ static int mixer_ctl_connector_get(struct snd_kcontrol *kcontrol,
 		usb_audio_err(chip,
 			"cannot get connectors status: req = %#x, wValue = %#x, wIndex = %#x, type = %d\n",
 			UAC_GET_CUR, validx, idx, cval->val_type);
-		return ret;
+		return filter_error(cval, ret);
 	}
 
 	ucontrol->value.integer.value[0] = val;
@@ -1674,6 +1685,16 @@ static void __build_feature_ctl(struct usb_mixer_interface *mixer,
 	/* get min/max values */
 	get_min_max_with_quirks(cval, 0, kctl);
 
+	/* skip a bogus volume range */
+	if (cval->max <= cval->min) {
+		usb_audio_dbg(mixer->chip,
+			      "[%d] FU [%s] skipped due to invalid volume\n",
+			      cval->head.id, kctl->id.name);
+		snd_ctl_free_one(kctl);
+		return;
+	}
+
+
 	if (control == UAC_FU_VOLUME) {
 		check_mapped_dB(map, cval);
 		if (cval->dBmin < cval->dBmax || !cval->initialized) {
@@ -1750,11 +1771,15 @@ static void get_connector_control_name(struct usb_mixer_interface *mixer,
 
 /* Build a mixer control for a UAC connector control (jack-detect) */
 static void build_connector_control(struct usb_mixer_interface *mixer,
+				    const struct usbmix_name_map *imap,
 				    struct usb_audio_term *term, bool is_input)
 {
 	struct snd_kcontrol *kctl;
 	struct usb_mixer_elem_info *cval;
 
+	if (check_ignored_ctl(find_map(imap, term->id, 0)))
+		return;
+
 	cval = kzalloc(sizeof(*cval), GFP_KERNEL);
 	if (!cval)
 		return;
@@ -2088,8 +2113,9 @@ static int parse_audio_input_terminal(struct mixer_build *state, int unitid,
 	check_input_term(state, term_id, &iterm);
 
 	/* Check for jack detection. */
-	if (uac_v2v3_control_is_readable(bmctls, control))
-		build_connector_control(state->mixer, &iterm, true);
+	if ((iterm.type & 0xff00) != 0x0100 &&
+	    uac_v2v3_control_is_readable(bmctls, control))
+		build_connector_control(state->mixer, state->map, &iterm, true);
 
 	return 0;
 }
@@ -3050,13 +3076,13 @@ static int snd_usb_mixer_controls_badd(struct usb_mixer_interface *mixer,
 		memset(&iterm, 0, sizeof(iterm));
 		iterm.id = UAC3_BADD_IT_ID4;
 		iterm.type = UAC_BIDIR_TERMINAL_HEADSET;
-		build_connector_control(mixer, &iterm, true);
+		build_connector_control(mixer, map->map, &iterm, true);
 
 		/* Output Term - Insertion control */
 		memset(&oterm, 0, sizeof(oterm));
 		oterm.id = UAC3_BADD_OT_ID3;
 		oterm.type = UAC_BIDIR_TERMINAL_HEADSET;
-		build_connector_control(mixer, &oterm, false);
+		build_connector_control(mixer, map->map, &oterm, false);
 	}
 
 	return 0;
@@ -3085,7 +3111,7 @@ static int snd_usb_mixer_controls(struct usb_mixer_interface *mixer)
 		if (map->id == state.chip->usb_id) {
 			state.map = map->map;
 			state.selector_map = map->selector_map;
-			mixer->ignore_ctl_error = map->ignore_ctl_error;
+			mixer->ignore_ctl_error |= map->ignore_ctl_error;
 			break;
 		}
 	}
@@ -3128,10 +3154,11 @@ static int snd_usb_mixer_controls(struct usb_mixer_interface *mixer)
 			if (err < 0 && err != -EINVAL)
 				return err;
 
-			if (uac_v2v3_control_is_readable(le16_to_cpu(desc->bmControls),
+			if ((state.oterm.type & 0xff00) != 0x0100 &&
+			    uac_v2v3_control_is_readable(le16_to_cpu(desc->bmControls),
 							 UAC2_TE_CONNECTOR)) {
-				build_connector_control(state.mixer, &state.oterm,
-							false);
+				build_connector_control(state.mixer, state.map,
+							&state.oterm, false);
 			}
 		} else {  /* UAC_VERSION_3 */
 			struct uac3_output_terminal_descriptor *desc = p;
@@ -3153,10 +3180,11 @@ static int snd_usb_mixer_controls(struct usb_mixer_interface *mixer)
 			if (err < 0 && err != -EINVAL)
 				return err;
 
-			if (uac_v2v3_control_is_readable(le32_to_cpu(desc->bmControls),
+			if ((state.oterm.type & 0xff00) != 0x0100 &&
+			    uac_v2v3_control_is_readable(le32_to_cpu(desc->bmControls),
 							 UAC3_TE_INSERTION)) {
-				build_connector_control(state.mixer, &state.oterm,
-							false);
+				build_connector_control(state.mixer, state.map,
+							&state.oterm, false);
 			}
 		}
 	}
@@ -3203,7 +3231,7 @@ static void snd_usb_mixer_proc_read(struct snd_info_entry *entry,
 	list_for_each_entry(mixer, &chip->mixer_list, list) {
 		snd_iprintf(buffer,
 			"USB Mixer: usb_id=0x%08x, ctrlif=%i, ctlerr=%i\n",
-				chip->usb_id, snd_usb_ctrl_intf(chip),
+				chip->usb_id, mixer_ctrl_intf(mixer),
 				mixer->ignore_ctl_error);
 		snd_iprintf(buffer, "Card: %s\n", chip->card->longname);
 		for (unitid = 0; unitid < MAX_ID_ELEMS; unitid++) {
diff --git a/sound/usb/mixer_maps.c b/sound/usb/mixer_maps.c
index 5ebca80..b4e7700 100644
--- a/sound/usb/mixer_maps.c
+++ b/sound/usb/mixer_maps.c
@@ -359,6 +359,16 @@ static const struct usbmix_name_map corsair_virtuoso_map[] = {
 	{ 0 }
 };
 
+/* Some mobos shipped with a dummy HD-audio show the invalid GET_MIN/GET_MAX
+ * response for Input Gain Pad (id=19, control=12) and the connector status
+ * for SPDIF terminal (id=18).  Skip them.
+ */
+static const struct usbmix_name_map asus_rog_map[] = {
+	{ 18, NULL }, /* OT, connector control */
+	{ 19, NULL, 12 }, /* FU, Input Gain Pad */
+	{}
+};
+
 /*
  * Control map entries
  */
@@ -488,6 +498,26 @@ static const struct usbmix_ctl_map usbmix_ctl_maps[] = {
 		.id = USB_ID(0x1b1c, 0x0a42),
 		.map = corsair_virtuoso_map,
 	},
+	{	/* Gigabyte TRX40 Aorus Pro WiFi */
+		.id = USB_ID(0x0414, 0xa002),
+		.map = asus_rog_map,
+	},
+	{	/* ASUS ROG Zenith II */
+		.id = USB_ID(0x0b05, 0x1916),
+		.map = asus_rog_map,
+	},
+	{	/* ASUS ROG Strix */
+		.id = USB_ID(0x0b05, 0x1917),
+		.map = asus_rog_map,
+	},
+	{	/* MSI TRX40 Creator */
+		.id = USB_ID(0x0db0, 0x0d64),
+		.map = asus_rog_map,
+	},
+	{	/* MSI TRX40 */
+		.id = USB_ID(0x0db0, 0x543d),
+		.map = asus_rog_map,
+	},
 	{ 0 } /* terminator */
 };
 
diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c
index c237e24..02b036b 100644
--- a/sound/usb/mixer_quirks.c
+++ b/sound/usb/mixer_quirks.c
@@ -34,6 +34,7 @@
 #include "mixer_scarlett.h"
 #include "mixer_scarlett_gen2.h"
 #include "mixer_us16x08.h"
+#include "mixer_s1810c.h"
 #include "helper.h"
 
 struct std_mono_table {
@@ -2277,6 +2278,10 @@ int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer)
 	case USB_ID(0x2a39, 0x3fd4): /* RME */
 		err = snd_rme_controls_create(mixer);
 		break;
+
+	case USB_ID(0x0194f, 0x010c): /* Presonus Studio 1810c */
+		err = snd_sc1810_init_mixer(mixer);
+		break;
 	}
 
 	return err;
diff --git a/sound/usb/mixer_s1810c.c b/sound/usb/mixer_s1810c.c
new file mode 100644
index 0000000..6483e47
--- /dev/null
+++ b/sound/usb/mixer_s1810c.c
@@ -0,0 +1,595 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Presonus Studio 1810c driver for ALSA
+ * Copyright (C) 2019 Nick Kossifidis <mickflemm@gmail.com>
+ *
+ * Based on reverse engineering of the communication protocol
+ * between the windows driver / Univeral Control (UC) program
+ * and the device, through usbmon.
+ *
+ * For now this bypasses the mixer, with all channels split,
+ * so that the software can mix with greater flexibility.
+ * It also adds controls for the 4 buttons on the front of
+ * the device.
+ */
+
+#include <linux/usb.h>
+#include <linux/usb/audio-v2.h>
+#include <linux/slab.h>
+#include <sound/core.h>
+#include <sound/control.h>
+
+#include "usbaudio.h"
+#include "mixer.h"
+#include "mixer_quirks.h"
+#include "helper.h"
+#include "mixer_s1810c.h"
+
+#define SC1810C_CMD_REQ	160
+#define SC1810C_CMD_REQTYPE \
+	(USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT)
+#define SC1810C_CMD_F1		0x50617269
+#define SC1810C_CMD_F2		0x14
+
+/*
+ * DISCLAIMER: These are just guesses based on the
+ * dumps I got.
+ *
+ * It seems like a selects between
+ * device (0), mixer (0x64) and output (0x65)
+ *
+ * For mixer (0x64):
+ *  * b selects an input channel (see below).
+ *  * c selects an output channel pair (see below).
+ *  * d selects left (0) or right (1) of that pair.
+ *  * e 0-> disconnect, 0x01000000-> connect,
+ *	0x0109-> used for stereo-linking channels,
+ *	e is also used for setting volume levels
+ *	in which case b is also set so I guess
+ *	this way it is possible to set the volume
+ *	level from the specified input to the
+ *	specified output.
+ *
+ * IN Channels:
+ * 0  - 7  Mic/Inst/Line (Analog inputs)
+ * 8  - 9  S/PDIF
+ * 10 - 17 ADAT
+ * 18 - 35 DAW (Inputs from the host)
+ *
+ * OUT Channels (pairs):
+ * 0 -> Main out
+ * 1 -> Line1/2
+ * 2 -> Line3/4
+ * 3 -> S/PDIF
+ * 4 -> ADAT?
+ *
+ * For device (0):
+ *  * b and c are not used, at least not on the
+ *    dumps I got.
+ *  * d sets the control id to be modified
+ *    (see below).
+ *  * e sets the setting for that control.
+ *    (so for the switches I was interested
+ *    in it's 0/1)
+ *
+ * For output (0x65):
+ *   * b is the output channel (see above).
+ *   * c is zero.
+ *   * e I guess the same as with mixer except 0x0109
+ *	 which I didn't see in my dumps.
+ *
+ * The two fixed fields have the same values for
+ * mixer and output but a different set for device.
+ */
+struct s1810c_ctl_packet {
+	u32 a;
+	u32 b;
+	u32 fixed1;
+	u32 fixed2;
+	u32 c;
+	u32 d;
+	u32 e;
+};
+
+#define SC1810C_CTL_LINE_SW	0
+#define SC1810C_CTL_MUTE_SW	1
+#define SC1810C_CTL_AB_SW	3
+#define SC1810C_CTL_48V_SW	4
+
+#define SC1810C_SET_STATE_REQ	161
+#define SC1810C_SET_STATE_REQTYPE SC1810C_CMD_REQTYPE
+#define SC1810C_SET_STATE_F1	0x64656D73
+#define SC1810C_SET_STATE_F2	0xF4
+
+#define SC1810C_GET_STATE_REQ	162
+#define SC1810C_GET_STATE_REQTYPE \
+	(USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN)
+#define SC1810C_GET_STATE_F1	SC1810C_SET_STATE_F1
+#define SC1810C_GET_STATE_F2	SC1810C_SET_STATE_F2
+
+#define SC1810C_STATE_F1_IDX	2
+#define SC1810C_STATE_F2_IDX	3
+
+/*
+ * This packet includes mixer volumes and
+ * various other fields, it's an extended
+ * version of ctl_packet, with a and b
+ * being zero and different f1/f2.
+ */
+struct s1810c_state_packet {
+	u32 fields[63];
+};
+
+#define SC1810C_STATE_48V_SW	58
+#define SC1810C_STATE_LINE_SW	59
+#define SC1810C_STATE_MUTE_SW	60
+#define SC1810C_STATE_AB_SW	62
+
+struct s1810_mixer_state {
+	uint16_t seqnum;
+	struct mutex usb_mutex;
+	struct mutex data_mutex;
+};
+
+static int
+snd_s1810c_send_ctl_packet(struct usb_device *dev, u32 a,
+			   u32 b, u32 c, u32 d, u32 e)
+{
+	struct s1810c_ctl_packet pkt = { 0 };
+	int ret = 0;
+
+	pkt.fixed1 = SC1810C_CMD_F1;
+	pkt.fixed2 = SC1810C_CMD_F2;
+
+	pkt.a = a;
+	pkt.b = b;
+	pkt.c = c;
+	pkt.d = d;
+	/*
+	 * Value for settings 0/1 for this
+	 * output channel is always 0 (probably because
+	 * there is no ADAT output on 1810c)
+	 */
+	pkt.e = (c == 4) ? 0 : e;
+
+	ret = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			      SC1810C_CMD_REQ,
+			      SC1810C_CMD_REQTYPE, 0, 0, &pkt, sizeof(pkt));
+	if (ret < 0) {
+		dev_warn(&dev->dev, "could not send ctl packet\n");
+		return ret;
+	}
+	return 0;
+}
+
+/*
+ * When opening Universal Control the program periodicaly
+ * sends and receives state packets for syncinc state between
+ * the device and the host.
+ *
+ * Note that if we send only the request to get data back we'll
+ * get an error, we need to first send an empty state packet and
+ * then ask to receive a filled. Their seqnumbers must also match.
+ */
+static int
+snd_sc1810c_get_status_field(struct usb_device *dev,
+			     u32 *field, int field_idx, uint16_t *seqnum)
+{
+	struct s1810c_state_packet pkt_out = { { 0 } };
+	struct s1810c_state_packet pkt_in = { { 0 } };
+	int ret = 0;
+
+	pkt_out.fields[SC1810C_STATE_F1_IDX] = SC1810C_SET_STATE_F1;
+	pkt_out.fields[SC1810C_STATE_F2_IDX] = SC1810C_SET_STATE_F2;
+	ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0),
+			      SC1810C_SET_STATE_REQ,
+			      SC1810C_SET_STATE_REQTYPE,
+			      (*seqnum), 0, &pkt_out, sizeof(pkt_out));
+	if (ret < 0) {
+		dev_warn(&dev->dev, "could not send state packet (%d)\n", ret);
+		return ret;
+	}
+
+	ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0),
+			      SC1810C_GET_STATE_REQ,
+			      SC1810C_GET_STATE_REQTYPE,
+			      (*seqnum), 0, &pkt_in, sizeof(pkt_in));
+	if (ret < 0) {
+		dev_warn(&dev->dev, "could not get state field %u (%d)\n",
+			 field_idx, ret);
+		return ret;
+	}
+
+	(*field) = pkt_in.fields[field_idx];
+	(*seqnum)++;
+	return 0;
+}
+
+/*
+ * This is what I got when bypassing the mixer with
+ * all channels split. I'm not 100% sure of what's going
+ * on, I could probably clean this up based on my observations
+ * but I prefer to keep the same behavior as the windows driver.
+ */
+static int snd_s1810c_init_mixer_maps(struct snd_usb_audio *chip)
+{
+	u32 a, b, c, e, n, off;
+	struct usb_device *dev = chip->dev;
+
+	/* Set initial volume levels ? */
+	a = 0x64;
+	e = 0xbc;
+	for (n = 0; n < 2; n++) {
+		off = n * 18;
+		for (b = off, c = 0; b < 18 + off; b++) {
+			/* This channel to all outputs ? */
+			for (c = 0; c <= 8; c++) {
+				snd_s1810c_send_ctl_packet(dev, a, b, c, 0, e);
+				snd_s1810c_send_ctl_packet(dev, a, b, c, 1, e);
+			}
+			/* This channel to main output (again) */
+			snd_s1810c_send_ctl_packet(dev, a, b, 0, 0, e);
+			snd_s1810c_send_ctl_packet(dev, a, b, 0, 1, e);
+		}
+		/*
+		 * I noticed on UC that DAW channels have different
+		 * initial volumes, so this makes sense.
+		 */
+		e = 0xb53bf0;
+	}
+
+	/* Connect analog outputs ? */
+	a = 0x65;
+	e = 0x01000000;
+	for (b = 1; b < 3; b++) {
+		snd_s1810c_send_ctl_packet(dev, a, b, 0, 0, e);
+		snd_s1810c_send_ctl_packet(dev, a, b, 0, 1, e);
+	}
+	snd_s1810c_send_ctl_packet(dev, a, 0, 0, 0, e);
+	snd_s1810c_send_ctl_packet(dev, a, 0, 0, 1, e);
+
+	/* Set initial volume levels for S/PDIF mappings ? */
+	a = 0x64;
+	e = 0xbc;
+	c = 3;
+	for (n = 0; n < 2; n++) {
+		off = n * 18;
+		for (b = off; b < 18 + off; b++) {
+			snd_s1810c_send_ctl_packet(dev, a, b, c, 0, e);
+			snd_s1810c_send_ctl_packet(dev, a, b, c, 1, e);
+		}
+		e = 0xb53bf0;
+	}
+
+	/* Connect S/PDIF output ? */
+	a = 0x65;
+	e = 0x01000000;
+	snd_s1810c_send_ctl_packet(dev, a, 3, 0, 0, e);
+	snd_s1810c_send_ctl_packet(dev, a, 3, 0, 1, e);
+
+	/* Connect all outputs (again) ? */
+	a = 0x65;
+	e = 0x01000000;
+	for (b = 0; b < 4; b++) {
+		snd_s1810c_send_ctl_packet(dev, a, b, 0, 0, e);
+		snd_s1810c_send_ctl_packet(dev, a, b, 0, 1, e);
+	}
+
+	/* Basic routing to get sound out of the device */
+	a = 0x64;
+	e = 0x01000000;
+	for (c = 0; c < 4; c++) {
+		for (b = 0; b < 36; b++) {
+			if ((c == 0 && b == 18) ||	/* DAW1/2 -> Main */
+			    (c == 1 && b == 20) ||	/* DAW3/4 -> Line3/4 */
+			    (c == 2 && b == 22) ||	/* DAW4/5 -> Line5/6 */
+			    (c == 3 && b == 24)) {	/* DAW5/6 -> S/PDIF */
+				/* Left */
+				snd_s1810c_send_ctl_packet(dev, a, b, c, 0, e);
+				snd_s1810c_send_ctl_packet(dev, a, b, c, 1, 0);
+				b++;
+				/* Right */
+				snd_s1810c_send_ctl_packet(dev, a, b, c, 0, 0);
+				snd_s1810c_send_ctl_packet(dev, a, b, c, 1, e);
+			} else {
+				/* Leave the rest disconnected */
+				snd_s1810c_send_ctl_packet(dev, a, b, c, 0, 0);
+				snd_s1810c_send_ctl_packet(dev, a, b, c, 1, 0);
+			}
+		}
+	}
+
+	/* Set initial volume levels for S/PDIF (again) ? */
+	a = 0x64;
+	e = 0xbc;
+	c = 3;
+	for (n = 0; n < 2; n++) {
+		off = n * 18;
+		for (b = off; b < 18 + off; b++) {
+			snd_s1810c_send_ctl_packet(dev, a, b, c, 0, e);
+			snd_s1810c_send_ctl_packet(dev, a, b, c, 1, e);
+		}
+		e = 0xb53bf0;
+	}
+
+	/* Connect S/PDIF outputs (again) ? */
+	a = 0x65;
+	e = 0x01000000;
+	snd_s1810c_send_ctl_packet(dev, a, 3, 0, 0, e);
+	snd_s1810c_send_ctl_packet(dev, a, 3, 0, 1, e);
+
+	/* Again ? */
+	snd_s1810c_send_ctl_packet(dev, a, 3, 0, 0, e);
+	snd_s1810c_send_ctl_packet(dev, a, 3, 0, 1, e);
+
+	return 0;
+}
+
+/*
+ * Sync state with the device and retrieve the requested field,
+ * whose index is specified in (kctl->private_value & 0xFF),
+ * from the received fields array.
+ */
+static int
+snd_s1810c_get_switch_state(struct usb_mixer_interface *mixer,
+			    struct snd_kcontrol *kctl, u32 *state)
+{
+	struct snd_usb_audio *chip = mixer->chip;
+	struct s1810_mixer_state *private = mixer->private_data;
+	u32 field = 0;
+	u32 ctl_idx = (u32) (kctl->private_value & 0xFF);
+	int ret = 0;
+
+	mutex_lock(&private->usb_mutex);
+	ret = snd_sc1810c_get_status_field(chip->dev, &field,
+					   ctl_idx, &private->seqnum);
+	if (ret < 0)
+		goto unlock;
+
+	*state = field;
+ unlock:
+	mutex_unlock(&private->usb_mutex);
+	return ret ? ret : 0;
+}
+
+/*
+ * Send a control packet to the device for the control id
+ * specified in (kctl->private_value >> 8) with value
+ * specified in (kctl->private_value >> 16).
+ */
+static int
+snd_s1810c_set_switch_state(struct usb_mixer_interface *mixer,
+			    struct snd_kcontrol *kctl)
+{
+	struct snd_usb_audio *chip = mixer->chip;
+	struct s1810_mixer_state *private = mixer->private_data;
+	u32 pval = (u32) kctl->private_value;
+	u32 ctl_id = (pval >> 8) & 0xFF;
+	u32 ctl_val = (pval >> 16) & 0x1;
+	int ret = 0;
+
+	mutex_lock(&private->usb_mutex);
+	ret = snd_s1810c_send_ctl_packet(chip->dev, 0, 0, 0, ctl_id, ctl_val);
+	mutex_unlock(&private->usb_mutex);
+	return ret;
+}
+
+/* Generic get/set/init functions for switch controls */
+
+static int
+snd_s1810c_switch_get(struct snd_kcontrol *kctl,
+		      struct snd_ctl_elem_value *ctl_elem)
+{
+	struct usb_mixer_elem_list *list = snd_kcontrol_chip(kctl);
+	struct usb_mixer_interface *mixer = list->mixer;
+	struct s1810_mixer_state *private = mixer->private_data;
+	u32 pval = (u32) kctl->private_value;
+	u32 ctl_idx = pval & 0xFF;
+	u32 state = 0;
+	int ret = 0;
+
+	mutex_lock(&private->data_mutex);
+	ret = snd_s1810c_get_switch_state(mixer, kctl, &state);
+	if (ret < 0)
+		goto unlock;
+
+	switch (ctl_idx) {
+	case SC1810C_STATE_LINE_SW:
+	case SC1810C_STATE_AB_SW:
+		ctl_elem->value.enumerated.item[0] = (int)state;
+		break;
+	default:
+		ctl_elem->value.integer.value[0] = (long)state;
+	}
+
+ unlock:
+	mutex_unlock(&private->data_mutex);
+	return (ret < 0) ? ret : 0;
+}
+
+static int
+snd_s1810c_switch_set(struct snd_kcontrol *kctl,
+		      struct snd_ctl_elem_value *ctl_elem)
+{
+	struct usb_mixer_elem_list *list = snd_kcontrol_chip(kctl);
+	struct usb_mixer_interface *mixer = list->mixer;
+	struct s1810_mixer_state *private = mixer->private_data;
+	u32 pval = (u32) kctl->private_value;
+	u32 ctl_idx = pval & 0xFF;
+	u32 curval = 0;
+	u32 newval = 0;
+	int ret = 0;
+
+	mutex_lock(&private->data_mutex);
+	ret = snd_s1810c_get_switch_state(mixer, kctl, &curval);
+	if (ret < 0)
+		goto unlock;
+
+	switch (ctl_idx) {
+	case SC1810C_STATE_LINE_SW:
+	case SC1810C_STATE_AB_SW:
+		newval = (u32) ctl_elem->value.enumerated.item[0];
+		break;
+	default:
+		newval = (u32) ctl_elem->value.integer.value[0];
+	}
+
+	if (curval == newval)
+		goto unlock;
+
+	kctl->private_value &= ~(0x1 << 16);
+	kctl->private_value |= (unsigned int)(newval & 0x1) << 16;
+	ret = snd_s1810c_set_switch_state(mixer, kctl);
+
+ unlock:
+	mutex_unlock(&private->data_mutex);
+	return (ret < 0) ? 0 : 1;
+}
+
+static int
+snd_s1810c_switch_init(struct usb_mixer_interface *mixer,
+		       const struct snd_kcontrol_new *new_kctl)
+{
+	struct snd_kcontrol *kctl;
+	struct usb_mixer_elem_info *elem;
+
+	elem = kzalloc(sizeof(struct usb_mixer_elem_info), GFP_KERNEL);
+	if (!elem)
+		return -ENOMEM;
+
+	elem->head.mixer = mixer;
+	elem->control = 0;
+	elem->head.id = 0;
+	elem->channels = 1;
+
+	kctl = snd_ctl_new1(new_kctl, elem);
+	if (!kctl) {
+		kfree(elem);
+		return -ENOMEM;
+	}
+	kctl->private_free = snd_usb_mixer_elem_free;
+
+	return snd_usb_mixer_add_control(&elem->head, kctl);
+}
+
+static int
+snd_s1810c_line_sw_info(struct snd_kcontrol *kctl,
+			struct snd_ctl_elem_info *uinfo)
+{
+	static const char *const texts[2] = {
+		"Preamp On (Mic/Inst)",
+		"Preamp Off (Line in)"
+	};
+
+	return snd_ctl_enum_info(uinfo, 1, ARRAY_SIZE(texts), texts);
+}
+
+static const struct snd_kcontrol_new snd_s1810c_line_sw = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "Line 1/2 Source Type",
+	.info = snd_s1810c_line_sw_info,
+	.get = snd_s1810c_switch_get,
+	.put = snd_s1810c_switch_set,
+	.private_value = (SC1810C_STATE_LINE_SW | SC1810C_CTL_LINE_SW << 8)
+};
+
+static const struct snd_kcontrol_new snd_s1810c_mute_sw = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "Mute Main Out Switch",
+	.info = snd_ctl_boolean_mono_info,
+	.get = snd_s1810c_switch_get,
+	.put = snd_s1810c_switch_set,
+	.private_value = (SC1810C_STATE_MUTE_SW | SC1810C_CTL_MUTE_SW << 8)
+};
+
+static const struct snd_kcontrol_new snd_s1810c_48v_sw = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "48V Phantom Power On Mic Inputs Switch",
+	.info = snd_ctl_boolean_mono_info,
+	.get = snd_s1810c_switch_get,
+	.put = snd_s1810c_switch_set,
+	.private_value = (SC1810C_STATE_48V_SW | SC1810C_CTL_48V_SW << 8)
+};
+
+static int
+snd_s1810c_ab_sw_info(struct snd_kcontrol *kctl,
+		      struct snd_ctl_elem_info *uinfo)
+{
+	static const char *const texts[2] = {
+		"1/2",
+		"3/4"
+	};
+
+	return snd_ctl_enum_info(uinfo, 1, ARRAY_SIZE(texts), texts);
+}
+
+static const struct snd_kcontrol_new snd_s1810c_ab_sw = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "Headphone 1 Source Route",
+	.info = snd_s1810c_ab_sw_info,
+	.get = snd_s1810c_switch_get,
+	.put = snd_s1810c_switch_set,
+	.private_value = (SC1810C_STATE_AB_SW | SC1810C_CTL_AB_SW << 8)
+};
+
+static void snd_sc1810_mixer_state_free(struct usb_mixer_interface *mixer)
+{
+	struct s1810_mixer_state *private = mixer->private_data;
+	kfree(private);
+	mixer->private_data = NULL;
+}
+
+/* Entry point, called from mixer_quirks.c */
+int snd_sc1810_init_mixer(struct usb_mixer_interface *mixer)
+{
+	struct s1810_mixer_state *private = NULL;
+	struct snd_usb_audio *chip = mixer->chip;
+	struct usb_device *dev = chip->dev;
+	int ret = 0;
+
+	/* Run this only once */
+	if (!list_empty(&chip->mixer_list))
+		return 0;
+
+	dev_info(&dev->dev,
+		 "Presonus Studio 1810c, device_setup: %u\n", chip->setup);
+	if (chip->setup == 1)
+		dev_info(&dev->dev, "(8out/18in @ 48KHz)\n");
+	else if (chip->setup == 2)
+		dev_info(&dev->dev, "(6out/8in @ 192KHz)\n");
+	else
+		dev_info(&dev->dev, "(8out/14in @ 96KHz)\n");
+
+	ret = snd_s1810c_init_mixer_maps(chip);
+	if (ret < 0)
+		return ret;
+
+	private = kzalloc(sizeof(struct s1810_mixer_state), GFP_KERNEL);
+	if (!private)
+		return -ENOMEM;
+
+	mutex_init(&private->usb_mutex);
+	mutex_init(&private->data_mutex);
+
+	mixer->private_data = private;
+	mixer->private_free = snd_sc1810_mixer_state_free;
+
+	private->seqnum = 1;
+
+	ret = snd_s1810c_switch_init(mixer, &snd_s1810c_line_sw);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_s1810c_switch_init(mixer, &snd_s1810c_mute_sw);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_s1810c_switch_init(mixer, &snd_s1810c_48v_sw);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_s1810c_switch_init(mixer, &snd_s1810c_ab_sw);
+	if (ret < 0)
+		return ret;
+	return ret;
+}
diff --git a/sound/usb/mixer_s1810c.h b/sound/usb/mixer_s1810c.h
new file mode 100644
index 0000000..a79a374
--- /dev/null
+++ b/sound/usb/mixer_s1810c.h
@@ -0,0 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Presonus Studio 1810c driver for ALSA
+ * Copyright (C) 2019 Nick Kossifidis <mickflemm@gmail.com>
+ */
+
+int snd_sc1810_init_mixer(struct usb_mixer_interface *mixer);
diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c
index bd258f1..a4e4064 100644
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -357,7 +357,12 @@ static int set_sync_ep_implicit_fb_quirk(struct snd_usb_substream *subs,
 		ep = 0x81;
 		ifnum = 1;
 		goto add_sync_ep_from_ifnum;
-	case USB_ID(0x07fd, 0x0004): /* MOTU MicroBook II */
+	case USB_ID(0x07fd, 0x0004): /* MOTU MicroBook II/IIc */
+		/* MicroBook IIc */
+		if (altsd->bInterfaceClass == USB_CLASS_AUDIO)
+			return 0;
+
+		/* MicroBook II */
 		ep = 0x84;
 		ifnum = 0;
 		goto add_sync_ep_from_ifnum;
diff --git a/sound/usb/proc.c b/sound/usb/proc.c
index ffbf4bd..4174ad1 100644
--- a/sound/usb/proc.c
+++ b/sound/usb/proc.c
@@ -70,7 +70,7 @@ static void proc_dump_substream_formats(struct snd_usb_substream *subs, struct s
 		snd_iprintf(buffer, "  Interface %d\n", fp->iface);
 		snd_iprintf(buffer, "    Altset %d\n", fp->altsetting);
 		snd_iprintf(buffer, "    Format:");
-		for (fmt = 0; fmt <= SNDRV_PCM_FORMAT_LAST; ++fmt)
+		pcm_for_each_format(fmt)
 			if (fp->formats & pcm_format_to_bits(fmt))
 				snd_iprintf(buffer, " %s",
 					    snd_pcm_format_name(fmt));
diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index d187aa6..e009d58 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -3472,7 +3472,7 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"),
 },
 /* MOTU Microbook II */
 {
-	USB_DEVICE(0x07fd, 0x0004),
+	USB_DEVICE_VENDOR_SPEC(0x07fd, 0x0004),
 	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
 		.vendor_name = "MOTU",
 		.product_name = "MicroBookII",
@@ -3592,5 +3592,47 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"),
 		}
 	}
 },
+{
+	/*
+	 * Pioneer DJ DJM-250MK2
+	 * PCM is 8 channels out @ 48 fixed (endpoints 0x01).
+	 * The output from computer to the mixer is usable.
+	 *
+	 * The input (phono or line to computer) is not working.
+	 * It should be at endpoint 0x82 and probably also 8 channels,
+	 * but it seems that it works only with Pioneer proprietary software.
+	 * Even on officially supported OS, the Audacity was unable to record
+	 * and Mixxx to recognize the control vinyls.
+	 */
+	USB_DEVICE_VENDOR_SPEC(0x2b73, 0x0017),
+	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+		.ifnum = QUIRK_ANY_INTERFACE,
+		.type = QUIRK_COMPOSITE,
+		.data = (const struct snd_usb_audio_quirk[]) {
+			{
+				.ifnum = 0,
+				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
+				.data = &(const struct audioformat) {
+					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
+					.channels = 8, // outputs
+					.iface = 0,
+					.altsetting = 1,
+					.altset_idx = 1,
+					.endpoint = 0x01,
+					.ep_attr = USB_ENDPOINT_XFER_ISOC|
+						USB_ENDPOINT_SYNC_ASYNC,
+					.rates = SNDRV_PCM_RATE_48000,
+					.rate_min = 48000,
+					.rate_max = 48000,
+					.nr_rates = 1,
+					.rate_table = (unsigned int[]) { 48000 }
+				}
+			},
+			{
+				.ifnum = -1
+			}
+		}
+	}
+},
 
 #undef USB_DEVICE_VENDOR_SPEC
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index 7f558f4..a8ece17 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1252,6 +1252,38 @@ static int fasttrackpro_skip_setting_quirk(struct snd_usb_audio *chip,
 	return 0; /* keep this altsetting */
 }
 
+static int s1810c_skip_setting_quirk(struct snd_usb_audio *chip,
+					   int iface, int altno)
+{
+	/*
+	 * Altno settings:
+	 *
+	 * Playback (Interface 1):
+	 * 1: 6 Analog + 2 S/PDIF
+	 * 2: 6 Analog + 2 S/PDIF
+	 * 3: 6 Analog
+	 *
+	 * Capture (Interface 2):
+	 * 1: 8 Analog + 2 S/PDIF + 8 ADAT
+	 * 2: 8 Analog + 2 S/PDIF + 4 ADAT
+	 * 3: 8 Analog
+	 */
+
+	/*
+	 * I'll leave 2 as the default one and
+	 * use device_setup to switch to the
+	 * other two.
+	 */
+	if ((chip->setup == 0 || chip->setup > 2) && altno != 2)
+		return 1;
+	else if (chip->setup == 1 && altno != 1)
+		return 1;
+	else if (chip->setup == 2 && altno != 3)
+		return 1;
+
+	return 0;
+}
+
 int snd_usb_apply_interface_quirk(struct snd_usb_audio *chip,
 				  int iface,
 				  int altno)
@@ -1265,6 +1297,10 @@ int snd_usb_apply_interface_quirk(struct snd_usb_audio *chip,
 	/* fasttrackpro usb: skip altsets incompatible with device_setup */
 	if (chip->usb_id == USB_ID(0x0763, 0x2012))
 		return fasttrackpro_skip_setting_quirk(chip, iface, altno);
+	/* presonus studio 1810c: skip altsets incompatible with device_setup */
+	if (chip->usb_id == USB_ID(0x0194f, 0x010c))
+		return s1810c_skip_setting_quirk(chip, iface, altno);
+
 
 	return 0;
 }
@@ -1316,7 +1352,15 @@ int snd_usb_apply_boot_quirk(struct usb_device *dev,
 	case USB_ID(0x2466, 0x8010): /* Fractal Audio Axe-Fx 3 */
 		return snd_usb_axefx3_boot_quirk(dev);
 	case USB_ID(0x07fd, 0x0004): /* MOTU MicroBook II */
-		return snd_usb_motu_microbookii_boot_quirk(dev);
+		/*
+		 * For some reason interface 3 with vendor-spec class is
+		 * detected on MicroBook IIc.
+		 */
+		if (get_iface_desc(intf->altsetting)->bInterfaceClass ==
+		    USB_CLASS_VENDOR_SPEC &&
+		    get_iface_desc(intf->altsetting)->bInterfaceNumber < 3)
+			return snd_usb_motu_microbookii_boot_quirk(dev);
+		break;
 	}
 
 	return 0;
@@ -1754,5 +1798,48 @@ void snd_usb_audioformat_attributes_quirk(struct snd_usb_audio *chip,
 		else
 			fp->ep_attr |= USB_ENDPOINT_SYNC_SYNC;
 		break;
+	case USB_ID(0x07fd, 0x0004):  /* MOTU MicroBook IIc */
+		/*
+		 * MaxPacketsOnly attribute is erroneously set in endpoint
+		 * descriptors. As a result this card produces noise with
+		 * all sample rates other than 96 KHz.
+		 */
+		fp->attributes &= ~UAC_EP_CS_ATTR_FILL_MAX;
+		break;
 	}
 }
+
+/*
+ * registration quirk:
+ * the registration is skipped if a device matches with the given ID,
+ * unless the interface reaches to the defined one.  This is for delaying
+ * the registration until the last known interface, so that the card and
+ * devices appear at the same time.
+ */
+
+struct registration_quirk {
+	unsigned int usb_id;	/* composed via USB_ID() */
+	unsigned int interface;	/* the interface to trigger register */
+};
+
+#define REG_QUIRK_ENTRY(vendor, product, iface) \
+	{ .usb_id = USB_ID(vendor, product), .interface = (iface) }
+
+static const struct registration_quirk registration_quirks[] = {
+	REG_QUIRK_ENTRY(0x0951, 0x16d8, 2),	/* Kingston HyperX AMP */
+	REG_QUIRK_ENTRY(0x0951, 0x16ed, 2),	/* Kingston HyperX Cloud Alpha S */
+	{ 0 }					/* terminator */
+};
+
+/* return true if skipping registration */
+bool snd_usb_registration_quirk(struct snd_usb_audio *chip, int iface)
+{
+	const struct registration_quirk *q;
+
+	for (q = registration_quirks; q->usb_id; q++)
+		if (chip->usb_id == q->usb_id)
+			return iface != q->interface;
+
+	/* Register as normal */
+	return false;
+}
diff --git a/sound/usb/quirks.h b/sound/usb/quirks.h
index df03558..c76cf24 100644
--- a/sound/usb/quirks.h
+++ b/sound/usb/quirks.h
@@ -51,4 +51,6 @@ void snd_usb_audioformat_attributes_quirk(struct snd_usb_audio *chip,
 					  struct audioformat *fp,
 					  int stream);
 
+bool snd_usb_registration_quirk(struct snd_usb_audio *chip, int iface);
+
 #endif /* __USBAUDIO_QUIRKS_H */
diff --git a/sound/usb/stream.c b/sound/usb/stream.c
index afd5aa5..15296f2 100644
--- a/sound/usb/stream.c
+++ b/sound/usb/stream.c
@@ -502,6 +502,9 @@ static int __snd_usb_add_audio_stream(struct snd_usb_audio *chip,
 		subs = &as->substream[stream];
 		if (subs->ep_num)
 			continue;
+		if (snd_device_get_state(chip->card, as->pcm) !=
+		    SNDRV_DEV_BUILD)
+			chip->need_delayed_register = true;
 		err = snd_pcm_new_stream(as->pcm, stream, 1);
 		if (err < 0)
 			return err;
diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h
index 6fe3ab5..1c892c7 100644
--- a/sound/usb/usbaudio.h
+++ b/sound/usb/usbaudio.h
@@ -34,6 +34,7 @@ struct snd_usb_audio {
 	unsigned int txfr_quirk:1; /* Subframe boundaries on transfers */
 	unsigned int tx_length_quirk:1; /* Put length specifier in transfers */
 	unsigned int setup_fmt_after_resume_quirk:1; /* setup the format to interface after resume */
+	unsigned int need_delayed_register:1; /* warn for delayed registration */
 	int num_interfaces;
 	int num_suspended_intf;
 	int sample_rate_read_error;
diff --git a/sound/usb/usx2y/usbusx2yaudio.c b/sound/usb/usx2y/usbusx2yaudio.c
index 772f6f3..37d290f 100644
--- a/sound/usb/usx2y/usbusx2yaudio.c
+++ b/sound/usb/usx2y/usbusx2yaudio.c
@@ -906,11 +906,12 @@ static const struct snd_pcm_ops snd_usX2Y_pcm_ops =
  */
 static void usX2Y_audio_stream_free(struct snd_usX2Y_substream **usX2Y_substream)
 {
-	kfree(usX2Y_substream[SNDRV_PCM_STREAM_PLAYBACK]);
-	usX2Y_substream[SNDRV_PCM_STREAM_PLAYBACK] = NULL;
+	int stream;
 
-	kfree(usX2Y_substream[SNDRV_PCM_STREAM_CAPTURE]);
-	usX2Y_substream[SNDRV_PCM_STREAM_CAPTURE] = NULL;
+	for_each_pcm_streams(stream) {
+		kfree(usX2Y_substream[stream]);
+		usX2Y_substream[stream] = NULL;
+	}
 }
 
 static void snd_usX2Y_pcm_private_free(struct snd_pcm *pcm)
diff --git a/tools/accounting/.gitignore b/tools/accounting/.gitignore
index 8648520..c45fb4ed 100644
--- a/tools/accounting/.gitignore
+++ b/tools/accounting/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 getdelays
diff --git a/tools/arch/x86/include/asm/cpufeatures.h b/tools/arch/x86/include/asm/cpufeatures.h
index f3327cb..db18994 100644
--- a/tools/arch/x86/include/asm/cpufeatures.h
+++ b/tools/arch/x86/include/asm/cpufeatures.h
@@ -217,7 +217,7 @@
 #define X86_FEATURE_IBRS		( 7*32+25) /* Indirect Branch Restricted Speculation */
 #define X86_FEATURE_IBPB		( 7*32+26) /* Indirect Branch Prediction Barrier */
 #define X86_FEATURE_STIBP		( 7*32+27) /* Single Thread Indirect Branch Predictors */
-#define X86_FEATURE_ZEN			( 7*32+28) /* "" CPU is AMD family 0x17 (Zen) */
+#define X86_FEATURE_ZEN			( 7*32+28) /* "" CPU is AMD family 0x17 or above (Zen) */
 #define X86_FEATURE_L1TF_PTEINV		( 7*32+29) /* "" L1TF workaround PTE inversion */
 #define X86_FEATURE_IBRS_ENHANCED	( 7*32+30) /* Enhanced IBRS */
 #define X86_FEATURE_MSR_IA32_FEAT_CTL	( 7*32+31) /* "" MSR IA32_FEAT_CTL configured */
@@ -285,6 +285,7 @@
 #define X86_FEATURE_CQM_MBM_LOCAL	(11*32+ 3) /* LLC Local MBM monitoring */
 #define X86_FEATURE_FENCE_SWAPGS_USER	(11*32+ 4) /* "" LFENCE in user entry SWAPGS path */
 #define X86_FEATURE_FENCE_SWAPGS_KERNEL	(11*32+ 5) /* "" LFENCE in kernel entry SWAPGS path */
+#define X86_FEATURE_SPLIT_LOCK_DETECT	(11*32+ 6) /* #AC for split lock */
 
 /* Intel-defined CPU features, CPUID level 0x00000007:1 (EAX), word 12 */
 #define X86_FEATURE_AVX512_BF16		(12*32+ 5) /* AVX512 BFLOAT16 instructions */
@@ -299,6 +300,7 @@
 #define X86_FEATURE_AMD_IBRS		(13*32+14) /* "" Indirect Branch Restricted Speculation */
 #define X86_FEATURE_AMD_STIBP		(13*32+15) /* "" Single Thread Indirect Branch Predictors */
 #define X86_FEATURE_AMD_STIBP_ALWAYS_ON	(13*32+17) /* "" Single Thread Indirect Branch Predictors always-on preferred */
+#define X86_FEATURE_AMD_PPIN		(13*32+23) /* Protected Processor Inventory Number */
 #define X86_FEATURE_AMD_SSBD		(13*32+24) /* "" Speculative Store Bypass Disable */
 #define X86_FEATURE_VIRT_SSBD		(13*32+25) /* Virtualized Speculative Store Bypass Disable */
 #define X86_FEATURE_AMD_SSB_NO		(13*32+26) /* "" Speculative Store Bypass is fixed in hardware. */
@@ -367,6 +369,7 @@
 #define X86_FEATURE_INTEL_STIBP		(18*32+27) /* "" Single Thread Indirect Branch Predictors */
 #define X86_FEATURE_FLUSH_L1D		(18*32+28) /* Flush L1D cache */
 #define X86_FEATURE_ARCH_CAPABILITIES	(18*32+29) /* IA32_ARCH_CAPABILITIES MSR (Intel) */
+#define X86_FEATURE_CORE_CAPABILITIES	(18*32+30) /* "" IA32_CORE_CAPABILITIES MSR */
 #define X86_FEATURE_SPEC_CTRL_SSBD	(18*32+31) /* "" Speculative Store Bypass Disable */
 
 /*
diff --git a/tools/arch/x86/include/asm/msr-index.h b/tools/arch/x86/include/asm/msr-index.h
index d5e517d..12c9684 100644
--- a/tools/arch/x86/include/asm/msr-index.h
+++ b/tools/arch/x86/include/asm/msr-index.h
@@ -41,6 +41,10 @@
 
 /* Intel MSRs. Some also available on other CPUs */
 
+#define MSR_TEST_CTRL				0x00000033
+#define MSR_TEST_CTRL_SPLIT_LOCK_DETECT_BIT	29
+#define MSR_TEST_CTRL_SPLIT_LOCK_DETECT		BIT(MSR_TEST_CTRL_SPLIT_LOCK_DETECT_BIT)
+
 #define MSR_IA32_SPEC_CTRL		0x00000048 /* Speculation Control */
 #define SPEC_CTRL_IBRS			BIT(0)	   /* Indirect Branch Restricted Speculation */
 #define SPEC_CTRL_STIBP_SHIFT		1	   /* Single Thread Indirect Branch Predictor (STIBP) bit */
@@ -70,6 +74,11 @@
  */
 #define MSR_IA32_UMWAIT_CONTROL_TIME_MASK	(~0x03U)
 
+/* Abbreviated from Intel SDM name IA32_CORE_CAPABILITIES */
+#define MSR_IA32_CORE_CAPS			  0x000000cf
+#define MSR_IA32_CORE_CAPS_SPLIT_LOCK_DETECT_BIT  5
+#define MSR_IA32_CORE_CAPS_SPLIT_LOCK_DETECT	  BIT(MSR_IA32_CORE_CAPS_SPLIT_LOCK_DETECT_BIT)
+
 #define MSR_PKG_CST_CONFIG_CONTROL	0x000000e2
 #define NHM_C3_AUTO_DEMOTE		(1UL << 25)
 #define NHM_C1_AUTO_DEMOTE		(1UL << 26)
diff --git a/tools/bootconfig/.gitignore b/tools/bootconfig/.gitignore
index e7644df..b77513c 100644
--- a/tools/bootconfig/.gitignore
+++ b/tools/bootconfig/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 bootconfig
diff --git a/tools/bootconfig/Makefile b/tools/bootconfig/Makefile
index a6146ac..da59757 100644
--- a/tools/bootconfig/Makefile
+++ b/tools/bootconfig/Makefile
@@ -1,23 +1,30 @@
 # SPDX-License-Identifier: GPL-2.0
 # Makefile for bootconfig command
+include ../scripts/Makefile.include
 
 bindir ?= /usr/bin
 
-HEADER = include/linux/bootconfig.h
-CFLAGS = -Wall -g -I./include
+ifeq ($(srctree),)
+srctree := $(patsubst %/,%,$(dir $(CURDIR)))
+srctree := $(patsubst %/,%,$(dir $(srctree)))
+endif
 
-PROGS = bootconfig
+LIBSRC = $(srctree)/lib/bootconfig.c $(srctree)/include/linux/bootconfig.h
+CFLAGS = -Wall -g -I$(CURDIR)/include
 
-all: $(PROGS)
+ALL_TARGETS := bootconfig
+ALL_PROGRAMS := $(patsubst %,$(OUTPUT)%,$(ALL_TARGETS))
 
-bootconfig: ../../lib/bootconfig.c main.c $(HEADER)
+all: $(ALL_PROGRAMS)
+
+$(OUTPUT)bootconfig: main.c $(LIBSRC)
 	$(CC) $(filter %.c,$^) $(CFLAGS) -o $@
 
-install: $(PROGS)
-	install bootconfig $(DESTDIR)$(bindir)
+test: $(ALL_PROGRAMS) test-bootconfig.sh
+	./test-bootconfig.sh $(OUTPUT)
 
-test: bootconfig
-	./test-bootconfig.sh
+install: $(ALL_PROGRAMS)
+	install $(OUTPUT)bootconfig $(DESTDIR)$(bindir)
 
 clean:
-	$(RM) -f *.o bootconfig
+	$(RM) -f $(OUTPUT)*.o $(ALL_PROGRAMS)
diff --git a/tools/bootconfig/main.c b/tools/bootconfig/main.c
index a9b9781..16b9a42 100644
--- a/tools/bootconfig/main.c
+++ b/tools/bootconfig/main.c
@@ -130,6 +130,7 @@ int load_xbc_from_initrd(int fd, char **buf)
 	int ret;
 	u32 size = 0, csum = 0, rcsum;
 	char magic[BOOTCONFIG_MAGIC_LEN];
+	const char *msg;
 
 	ret = fstat(fd, &stat);
 	if (ret < 0)
@@ -182,10 +183,12 @@ int load_xbc_from_initrd(int fd, char **buf)
 		return -EINVAL;
 	}
 
-	ret = xbc_init(*buf);
+	ret = xbc_init(*buf, &msg, NULL);
 	/* Wrong data */
-	if (ret < 0)
+	if (ret < 0) {
+		pr_err("parse error: %s.\n", msg);
 		return ret;
+	}
 
 	return size;
 }
@@ -244,11 +247,34 @@ int delete_xbc(const char *path)
 	return ret;
 }
 
+static void show_xbc_error(const char *data, const char *msg, int pos)
+{
+	int lin = 1, col, i;
+
+	if (pos < 0) {
+		pr_err("Error: %s.\n", msg);
+		return;
+	}
+
+	/* Note that pos starts from 0 but lin and col should start from 1. */
+	col = pos + 1;
+	for (i = 0; i < pos; i++) {
+		if (data[i] == '\n') {
+			lin++;
+			col = pos - i;
+		}
+	}
+	pr_err("Parse Error: %s at %d:%d\n", msg, lin, col);
+
+}
+
 int apply_xbc(const char *path, const char *xbc_path)
 {
 	u32 size, csum;
 	char *buf, *data;
 	int ret, fd;
+	const char *msg;
+	int pos;
 
 	ret = load_xbc_file(xbc_path, &buf);
 	if (ret < 0) {
@@ -267,11 +293,12 @@ int apply_xbc(const char *path, const char *xbc_path)
 	*(u32 *)(data + size + 4) = csum;
 
 	/* Check the data format */
-	ret = xbc_init(buf);
+	ret = xbc_init(buf, &msg, &pos);
 	if (ret < 0) {
-		pr_err("Failed to parse %s: %d\n", xbc_path, ret);
+		show_xbc_error(data, msg, pos);
 		free(data);
 		free(buf);
+
 		return ret;
 	}
 	printf("Apply %s to %s\n", xbc_path, path);
diff --git a/tools/bootconfig/test-bootconfig.sh b/tools/bootconfig/test-bootconfig.sh
index 1411f4c..81b350f 100755
--- a/tools/bootconfig/test-bootconfig.sh
+++ b/tools/bootconfig/test-bootconfig.sh
@@ -3,9 +3,16 @@
 
 echo "Boot config test script"
 
-BOOTCONF=./bootconfig
-INITRD=`mktemp initrd-XXXX`
-TEMPCONF=`mktemp temp-XXXX.bconf`
+if [ -d "$1" ]; then
+  TESTDIR=$1
+else
+  TESTDIR=.
+fi
+BOOTCONF=${TESTDIR}/bootconfig
+
+INITRD=`mktemp ${TESTDIR}/initrd-XXXX`
+TEMPCONF=`mktemp ${TESTDIR}/temp-XXXX.bconf`
+OUTFILE=`mktemp ${TESTDIR}/tempout-XXXX`
 NG=0
 
 cleanup() {
@@ -65,7 +72,6 @@
 xpass test $new_size -eq $initrd_size
 
 echo "No error messge while applying"
-OUTFILE=`mktemp tempout-XXXX`
 dd if=/dev/zero of=$INITRD bs=4096 count=1
 printf " \0\0\0 \0\0\0" >> $INITRD
 $BOOTCONF -a $TEMPCONF $INITRD > $OUTFILE 2>&1
diff --git a/tools/bpf/.gitignore b/tools/bpf/.gitignore
index 5902419..cf53342 100644
--- a/tools/bpf/.gitignore
+++ b/tools/bpf/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 FEATURE-DUMP.bpf
 feature
 bpf_asm
diff --git a/tools/bpf/bpftool/.gitignore b/tools/bpf/bpftool/.gitignore
index 8d6e890..26cde83 100644
--- a/tools/bpf/bpftool/.gitignore
+++ b/tools/bpf/bpftool/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 *.d
 /_bpftool
 /bpftool
diff --git a/tools/bpf/bpftool/struct_ops.c b/tools/bpf/bpftool/struct_ops.c
index 2a7befb..0fe0d58 100644
--- a/tools/bpf/bpftool/struct_ops.c
+++ b/tools/bpf/bpftool/struct_ops.c
@@ -591,6 +591,8 @@ int do_struct_ops(int argc, char **argv)
 
 	err = cmd_select(cmds, argc, argv, do_help);
 
-	btf__free(btf_vmlinux);
+	if (!IS_ERR(btf_vmlinux))
+		btf__free(btf_vmlinux);
+
 	return err;
 }
diff --git a/tools/bpf/runqslower/.gitignore b/tools/bpf/runqslower/.gitignore
index 90a456a..ffdb702 100644
--- a/tools/bpf/runqslower/.gitignore
+++ b/tools/bpf/runqslower/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 /.output
diff --git a/tools/build/.gitignore b/tools/build/.gitignore
index a776371..98ae1f5 100644
--- a/tools/build/.gitignore
+++ b/tools/build/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 fixdep
diff --git a/tools/build/Makefile.feature b/tools/build/Makefile.feature
index 574c2e0..3e0c019 100644
--- a/tools/build/Makefile.feature
+++ b/tools/build/Makefile.feature
@@ -72,7 +72,8 @@
         setns				\
         libaio				\
         libzstd				\
-        disassembler-four-args
+        disassembler-four-args		\
+        file-handle
 
 # FEATURE_TESTS_BASIC + FEATURE_TESTS_EXTRA is the complete list
 # of all feature tests
diff --git a/tools/build/feature/.gitignore b/tools/build/feature/.gitignore
index 09b335b..15fcd34 100644
--- a/tools/build/feature/.gitignore
+++ b/tools/build/feature/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 *.d
 *.bin
 *.output
diff --git a/tools/build/feature/Makefile b/tools/build/feature/Makefile
index ab8e89a..9201238 100644
--- a/tools/build/feature/Makefile
+++ b/tools/build/feature/Makefile
@@ -68,7 +68,8 @@
          test-llvm-version.bin			\
          test-libaio.bin			\
          test-libzstd.bin			\
-         test-clang-bpf-global-var.bin
+         test-clang-bpf-global-var.bin		\
+         test-file-handle.bin
 
 FILES := $(addprefix $(OUTPUT),$(FILES))
 
@@ -327,6 +328,8 @@
 	$(CLANG) -S -g -target bpf -o - $(patsubst %.bin,%.c,$(@F)) |	\
 		grep BTF_KIND_VAR
 
+$(OUTPUT)test-file-handle.bin:
+	$(BUILD)
 
 ###############################
 
diff --git a/tools/build/feature/test-file-handle.c b/tools/build/feature/test-file-handle.c
new file mode 100644
index 0000000..4d3b03b
--- /dev/null
+++ b/tools/build/feature/test-file-handle.c
@@ -0,0 +1,17 @@
+#define _GNU_SOURCE
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <inttypes.h>
+
+int main(void)
+{
+	struct {
+		struct file_handle fh;
+		uint64_t cgroup_id;
+	} handle;
+	int mount_id;
+
+	name_to_handle_at(AT_FDCWD, "/", &handle.fh, &mount_id, 0);
+	return 0;
+}
diff --git a/tools/cgroup/.gitignore b/tools/cgroup/.gitignore
index 633cd9b..46a8277 100644
--- a/tools/cgroup/.gitignore
+++ b/tools/cgroup/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 cgroup_event_listener
diff --git a/tools/gpio/.gitignore b/tools/gpio/.gitignore
index a94c0e8..a00d604 100644
--- a/tools/gpio/.gitignore
+++ b/tools/gpio/.gitignore
@@ -1,4 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
 gpio-event-mon
 gpio-hammer
+gpio-watch
 lsgpio
 include/linux/gpio.h
diff --git a/tools/gpio/Build b/tools/gpio/Build
index 4141f35..67c7b7f 100644
--- a/tools/gpio/Build
+++ b/tools/gpio/Build
@@ -2,3 +2,4 @@
 lsgpio-y += lsgpio.o gpio-utils.o
 gpio-hammer-y += gpio-hammer.o gpio-utils.o
 gpio-event-mon-y += gpio-event-mon.o gpio-utils.o
+gpio-watch-y += gpio-watch.o
diff --git a/tools/gpio/Makefile b/tools/gpio/Makefile
index 6080de58..4404340 100644
--- a/tools/gpio/Makefile
+++ b/tools/gpio/Makefile
@@ -18,7 +18,7 @@
 
 override CFLAGS += -O2 -Wall -g -D_GNU_SOURCE -I$(OUTPUT)include
 
-ALL_TARGETS := lsgpio gpio-hammer gpio-event-mon
+ALL_TARGETS := lsgpio gpio-hammer gpio-event-mon gpio-watch
 ALL_PROGRAMS := $(patsubst %,$(OUTPUT)%,$(ALL_TARGETS))
 
 all: $(ALL_PROGRAMS)
@@ -35,7 +35,7 @@
 
 prepare: $(OUTPUT)include/linux/gpio.h
 
-GPIO_UTILS_IN := $(output)gpio-utils-in.o
+GPIO_UTILS_IN := $(OUTPUT)gpio-utils-in.o
 $(GPIO_UTILS_IN): prepare FORCE
 	$(Q)$(MAKE) $(build)=gpio-utils
 
@@ -66,6 +66,15 @@
 $(OUTPUT)gpio-event-mon: $(GPIO_EVENT_MON_IN)
 	$(QUIET_LINK)$(CC) $(CFLAGS) $(LDFLAGS) $< -o $@
 
+#
+# gpio-watch
+#
+GPIO_WATCH_IN := $(OUTPUT)gpio-watch-in.o
+$(GPIO_WATCH_IN): prepare FORCE
+	$(Q)$(MAKE) $(build)=gpio-watch
+$(OUTPUT)gpio-watch: $(GPIO_WATCH_IN)
+	$(QUIET_LINK)$(CC) $(CFLAGS) $(LDFLAGS) $< -o $@
+
 clean:
 	rm -f $(ALL_PROGRAMS)
 	rm -f $(OUTPUT)include/linux/gpio.h
diff --git a/tools/gpio/gpio-hammer.c b/tools/gpio/gpio-hammer.c
index 0e0060a..9fd926e 100644
--- a/tools/gpio/gpio-hammer.c
+++ b/tools/gpio/gpio-hammer.c
@@ -77,7 +77,7 @@ int hammer_device(const char *device_name, unsigned int *lines, int nlines,
 
 		fprintf(stdout, "[%c] ", swirr[j]);
 		j++;
-		if (j == sizeof(swirr)-1)
+		if (j == sizeof(swirr) - 1)
 			j = 0;
 
 		fprintf(stdout, "[");
@@ -135,7 +135,14 @@ int main(int argc, char **argv)
 			device_name = optarg;
 			break;
 		case 'o':
-			lines[i] = strtoul(optarg, NULL, 10);
+			/*
+			 * Avoid overflow. Do not immediately error, we want to
+			 * be able to accurately report on the amount of times
+			 * '-o' was given to give an accurate error message
+			 */
+			if (i < GPIOHANDLES_MAX)
+				lines[i] = strtoul(optarg, NULL, 10);
+
 			i++;
 			break;
 		case '?':
@@ -143,6 +150,14 @@ int main(int argc, char **argv)
 			return -1;
 		}
 	}
+
+	if (i >= GPIOHANDLES_MAX) {
+		fprintf(stderr,
+			"Only %d occurrences of '-o' are allowed, %d were found\n",
+			GPIOHANDLES_MAX, i + 1);
+		return -1;
+	}
+
 	nlines = i;
 
 	if (!device_name || !nlines) {
diff --git a/tools/gpio/gpio-utils.c b/tools/gpio/gpio-utils.c
index 53470de..0600378 100644
--- a/tools/gpio/gpio-utils.c
+++ b/tools/gpio/gpio-utils.c
@@ -17,7 +17,7 @@
 #include <linux/gpio.h>
 #include "gpio-utils.h"
 
-#define COMSUMER "gpio-utils"
+#define CONSUMER "gpio-utils"
 
 /**
  * doc: Operation of gpio
@@ -209,7 +209,7 @@ int gpiotools_gets(const char *device_name, unsigned int *lines,
 
 	ret = gpiotools_request_linehandle(device_name, lines, nlines,
 					   GPIOHANDLE_REQUEST_INPUT, data,
-					   COMSUMER);
+					   CONSUMER);
 	if (ret < 0)
 		return ret;
 
@@ -259,7 +259,7 @@ int gpiotools_sets(const char *device_name, unsigned int *lines,
 
 	ret = gpiotools_request_linehandle(device_name, lines, nlines,
 					   GPIOHANDLE_REQUEST_OUTPUT, data,
-					   COMSUMER);
+					   CONSUMER);
 	if (ret < 0)
 		return ret;
 
diff --git a/tools/gpio/gpio-watch.c b/tools/gpio/gpio-watch.c
new file mode 100644
index 0000000..5cea24f
--- /dev/null
+++ b/tools/gpio/gpio-watch.c
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * gpio-watch - monitor unrequested lines for property changes using the
+ *              character device
+ *
+ * Copyright (C) 2019 BayLibre SAS
+ * Author: Bartosz Golaszewski <bgolaszewski@baylibre.com>
+ */
+
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <linux/gpio.h>
+#include <poll.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/ioctl.h>
+#include <unistd.h>
+
+int main(int argc, char **argv)
+{
+	struct gpioline_info_changed chg;
+	struct gpioline_info req;
+	struct pollfd pfd;
+	int fd, i, j, ret;
+	char *event, *end;
+	ssize_t rd;
+
+	if (argc < 3)
+		goto err_usage;
+
+	fd = open(argv[1], O_RDWR | O_CLOEXEC);
+	if (fd < 0) {
+		perror("unable to open gpiochip");
+		return EXIT_FAILURE;
+	}
+
+	for (i = 0, j = 2; i < argc - 2; i++, j++) {
+		memset(&req, 0, sizeof(req));
+
+		req.line_offset = strtoul(argv[j], &end, 0);
+		if (*end != '\0')
+			goto err_usage;
+
+		ret = ioctl(fd, GPIO_GET_LINEINFO_WATCH_IOCTL, &req);
+		if (ret) {
+			perror("unable to set up line watch");
+			return EXIT_FAILURE;
+		}
+	}
+
+	pfd.fd = fd;
+	pfd.events = POLLIN | POLLPRI;
+
+	for (;;) {
+		ret = poll(&pfd, 1, 5000);
+		if (ret < 0) {
+			perror("error polling the linechanged fd");
+			return EXIT_FAILURE;
+		} else if (ret > 0) {
+			memset(&chg, 0, sizeof(chg));
+			rd = read(pfd.fd, &chg, sizeof(chg));
+			if (rd < 0 || rd != sizeof(chg)) {
+				if (rd != sizeof(chg))
+					errno = EIO;
+
+				perror("error reading line change event");
+				return EXIT_FAILURE;
+			}
+
+			switch (chg.event_type) {
+			case GPIOLINE_CHANGED_REQUESTED:
+				event = "requested";
+				break;
+			case GPIOLINE_CHANGED_RELEASED:
+				event = "released";
+				break;
+			case GPIOLINE_CHANGED_CONFIG:
+				event = "config changed";
+				break;
+			default:
+				fprintf(stderr,
+					"invalid event type received from the kernel\n");
+				return EXIT_FAILURE;
+			}
+
+			printf("line %u: %s at %llu\n",
+			       chg.info.line_offset, event, chg.timestamp);
+		}
+	}
+
+	return 0;
+
+err_usage:
+	printf("%s: <gpiochip> <line0> <line1> ...\n", argv[0]);
+	return EXIT_FAILURE;
+}
diff --git a/tools/iio/.gitignore b/tools/iio/.gitignore
index 3758202..5bd6f4d 100644
--- a/tools/iio/.gitignore
+++ b/tools/iio/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 iio_event_monitor
 iio_generic_buffer
 lsiio
diff --git a/tools/include/linux/bits.h b/tools/include/linux/bits.h
index 669d694..4671fbf 100644
--- a/tools/include/linux/bits.h
+++ b/tools/include/linux/bits.h
@@ -3,9 +3,9 @@
 #define __LINUX_BITS_H
 
 #include <linux/const.h>
+#include <vdso/bits.h>
 #include <asm/bitsperlong.h>
 
-#define BIT(nr)			(UL(1) << (nr))
 #define BIT_ULL(nr)		(ULL(1) << (nr))
 #define BIT_MASK(nr)		(UL(1) << ((nr) % BITS_PER_LONG))
 #define BIT_WORD(nr)		((nr) / BITS_PER_LONG)
@@ -18,12 +18,30 @@
  * position @h. For example
  * GENMASK_ULL(39, 21) gives us the 64bit vector 0x000000ffffe00000.
  */
-#define GENMASK(h, l) \
+#if !defined(__ASSEMBLY__) && \
+	(!defined(CONFIG_CC_IS_GCC) || CONFIG_GCC_VERSION >= 49000)
+#include <linux/build_bug.h>
+#define GENMASK_INPUT_CHECK(h, l) \
+	(BUILD_BUG_ON_ZERO(__builtin_choose_expr( \
+		__builtin_constant_p((l) > (h)), (l) > (h), 0)))
+#else
+/*
+ * BUILD_BUG_ON_ZERO is not available in h files included from asm files,
+ * disable the input check if that is the case.
+ */
+#define GENMASK_INPUT_CHECK(h, l) 0
+#endif
+
+#define __GENMASK(h, l) \
 	(((~UL(0)) - (UL(1) << (l)) + 1) & \
 	 (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
+#define GENMASK(h, l) \
+	(GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
 
-#define GENMASK_ULL(h, l) \
+#define __GENMASK_ULL(h, l) \
 	(((~ULL(0)) - (ULL(1) << (l)) + 1) & \
 	 (~ULL(0) >> (BITS_PER_LONG_LONG - 1 - (h))))
+#define GENMASK_ULL(h, l) \
+	(GENMASK_INPUT_CHECK(h, l) + __GENMASK_ULL(h, l))
 
 #endif	/* __LINUX_BITS_H */
diff --git a/tools/include/linux/build_bug.h b/tools/include/linux/build_bug.h
new file mode 100644
index 0000000..cc7070c
--- /dev/null
+++ b/tools/include/linux/build_bug.h
@@ -0,0 +1,82 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _LINUX_BUILD_BUG_H
+#define _LINUX_BUILD_BUG_H
+
+#include <linux/compiler.h>
+
+#ifdef __CHECKER__
+#define BUILD_BUG_ON_ZERO(e) (0)
+#else /* __CHECKER__ */
+/*
+ * Force a compilation error if condition is true, but also produce a
+ * result (of value 0 and type int), so the expression can be used
+ * e.g. in a structure initializer (or where-ever else comma expressions
+ * aren't permitted).
+ */
+#define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
+#endif /* __CHECKER__ */
+
+/* Force a compilation error if a constant expression is not a power of 2 */
+#define __BUILD_BUG_ON_NOT_POWER_OF_2(n)	\
+	BUILD_BUG_ON(((n) & ((n) - 1)) != 0)
+#define BUILD_BUG_ON_NOT_POWER_OF_2(n)			\
+	BUILD_BUG_ON((n) == 0 || (((n) & ((n) - 1)) != 0))
+
+/*
+ * BUILD_BUG_ON_INVALID() permits the compiler to check the validity of the
+ * expression but avoids the generation of any code, even if that expression
+ * has side-effects.
+ */
+#define BUILD_BUG_ON_INVALID(e) ((void)(sizeof((__force long)(e))))
+
+/**
+ * BUILD_BUG_ON_MSG - break compile if a condition is true & emit supplied
+ *		      error message.
+ * @condition: the condition which the compiler should know is false.
+ *
+ * See BUILD_BUG_ON for description.
+ */
+#define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
+
+/**
+ * BUILD_BUG_ON - break compile if a condition is true.
+ * @condition: the condition which the compiler should know is false.
+ *
+ * If you have some code which relies on certain constants being equal, or
+ * some other compile-time-evaluated condition, you should use BUILD_BUG_ON to
+ * detect if someone changes it.
+ */
+#define BUILD_BUG_ON(condition) \
+	BUILD_BUG_ON_MSG(condition, "BUILD_BUG_ON failed: " #condition)
+
+/**
+ * BUILD_BUG - break compile if used.
+ *
+ * If you have some code that you expect the compiler to eliminate at
+ * build time, you should use BUILD_BUG to detect if it is
+ * unexpectedly used.
+ */
+#define BUILD_BUG() BUILD_BUG_ON_MSG(1, "BUILD_BUG failed")
+
+/**
+ * static_assert - check integer constant expression at build time
+ *
+ * static_assert() is a wrapper for the C11 _Static_assert, with a
+ * little macro magic to make the message optional (defaulting to the
+ * stringification of the tested expression).
+ *
+ * Contrary to BUILD_BUG_ON(), static_assert() can be used at global
+ * scope, but requires the expression to be an integer constant
+ * expression (i.e., it is not enough that __builtin_constant_p() is
+ * true for expr).
+ *
+ * Also note that BUILD_BUG_ON() fails the build if the condition is
+ * true, while static_assert() fails the build if the expression is
+ * false.
+ */
+#ifndef static_assert
+#define static_assert(expr, ...) __static_assert(expr, ##__VA_ARGS__, #expr)
+#define __static_assert(expr, msg, ...) _Static_assert(expr, msg)
+#endif // static_assert
+
+#endif	/* _LINUX_BUILD_BUG_H */
diff --git a/tools/include/linux/compiler.h b/tools/include/linux/compiler.h
index 1827c2f..180f771 100644
--- a/tools/include/linux/compiler.h
+++ b/tools/include/linux/compiler.h
@@ -10,6 +10,32 @@
 # define __compiletime_error(message)
 #endif
 
+#ifdef __OPTIMIZE__
+# define __compiletime_assert(condition, msg, prefix, suffix)		\
+	do {								\
+		extern void prefix ## suffix(void) __compiletime_error(msg); \
+		if (!(condition))					\
+			prefix ## suffix();				\
+	} while (0)
+#else
+# define __compiletime_assert(condition, msg, prefix, suffix) do { } while (0)
+#endif
+
+#define _compiletime_assert(condition, msg, prefix, suffix) \
+	__compiletime_assert(condition, msg, prefix, suffix)
+
+/**
+ * compiletime_assert - break build and emit msg if condition is false
+ * @condition: a compile-time constant condition to check
+ * @msg:       a message to emit if condition is false
+ *
+ * In tradition of POSIX assert, this macro will break the build if the
+ * supplied condition is *false*, emitting the supplied error message if the
+ * compiler has support to do so.
+ */
+#define compiletime_assert(condition, msg) \
+	_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
+
 /* Optimization barrier */
 /* The "volatile" is due to gcc bugs */
 #define barrier() __asm__ __volatile__("": : :"memory")
diff --git a/tools/include/linux/const.h b/tools/include/linux/const.h
index 7b55a55..81b8aae 100644
--- a/tools/include/linux/const.h
+++ b/tools/include/linux/const.h
@@ -1,9 +1,6 @@
 #ifndef _LINUX_CONST_H
 #define _LINUX_CONST_H
 
-#include <uapi/linux/const.h>
-
-#define UL(x)		(_UL(x))
-#define ULL(x)		(_ULL(x))
+#include <vdso/const.h>
 
 #endif /* _LINUX_CONST_H */
diff --git a/tools/include/linux/kernel.h b/tools/include/linux/kernel.h
index cba2269..a7e54a0 100644
--- a/tools/include/linux/kernel.h
+++ b/tools/include/linux/kernel.h
@@ -5,6 +5,7 @@
 #include <stdarg.h>
 #include <stddef.h>
 #include <assert.h>
+#include <linux/build_bug.h>
 #include <linux/compiler.h>
 #include <endian.h>
 #include <byteswap.h>
@@ -35,9 +36,6 @@
 	(type *)((char *)__mptr - offsetof(type, member)); })
 #endif
 
-#define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
-#define BUILD_BUG_ON_ZERO(e) (sizeof(struct { int:-!!(e); }))
-
 #ifndef max
 #define max(x, y) ({				\
 	typeof(x) _max1 = (x);			\
diff --git a/tools/include/uapi/drm/drm.h b/tools/include/uapi/drm/drm.h
index 868bf79..808b48a 100644
--- a/tools/include/uapi/drm/drm.h
+++ b/tools/include/uapi/drm/drm.h
@@ -948,6 +948,8 @@ extern "C" {
 #define DRM_IOCTL_SYNCOBJ_TRANSFER	DRM_IOWR(0xCC, struct drm_syncobj_transfer)
 #define DRM_IOCTL_SYNCOBJ_TIMELINE_SIGNAL	DRM_IOWR(0xCD, struct drm_syncobj_timeline_array)
 
+#define DRM_IOCTL_MODE_GETFB2		DRM_IOWR(0xCE, struct drm_mode_fb_cmd2)
+
 /**
  * Device specific ioctls should only be in their respective headers
  * The device specific ioctl range is from 0x40 to 0x9f.
diff --git a/tools/include/uapi/drm/i915_drm.h b/tools/include/uapi/drm/i915_drm.h
index 829c0a4..2813e57 100644
--- a/tools/include/uapi/drm/i915_drm.h
+++ b/tools/include/uapi/drm/i915_drm.h
@@ -1619,6 +1619,27 @@ struct drm_i915_gem_context_param {
  * By default, new contexts allow persistence.
  */
 #define I915_CONTEXT_PARAM_PERSISTENCE	0xb
+
+/*
+ * I915_CONTEXT_PARAM_RINGSIZE:
+ *
+ * Sets the size of the CS ringbuffer to use for logical ring contexts. This
+ * applies a limit of how many batches can be queued to HW before the caller
+ * is blocked due to lack of space for more commands.
+ *
+ * Only reliably possible to be set prior to first use, i.e. during
+ * construction. At any later point, the current execution must be flushed as
+ * the ring can only be changed while the context is idle. Note, the ringsize
+ * can be specified as a constructor property, see
+ * I915_CONTEXT_CREATE_EXT_SETPARAM, but can also be set later if required.
+ *
+ * Only applies to the current set of engine and lost when those engines
+ * are replaced by a new mapping (see I915_CONTEXT_PARAM_ENGINES).
+ *
+ * Must be between 4 - 512 KiB, in intervals of page size [4 KiB].
+ * Default is 16 KiB.
+ */
+#define I915_CONTEXT_PARAM_RINGSIZE	0xc
 /* Must be kept compact -- no holes and well documented */
 
 	__u64 value;
diff --git a/tools/include/uapi/linux/fscrypt.h b/tools/include/uapi/linux/fscrypt.h
index 0d8a6f4..a10e3cd 100644
--- a/tools/include/uapi/linux/fscrypt.h
+++ b/tools/include/uapi/linux/fscrypt.h
@@ -163,6 +163,7 @@ struct fscrypt_get_key_status_arg {
 #define FS_IOC_REMOVE_ENCRYPTION_KEY		_IOWR('f', 24, struct fscrypt_remove_key_arg)
 #define FS_IOC_REMOVE_ENCRYPTION_KEY_ALL_USERS	_IOWR('f', 25, struct fscrypt_remove_key_arg)
 #define FS_IOC_GET_ENCRYPTION_KEY_STATUS	_IOWR('f', 26, struct fscrypt_get_key_status_arg)
+#define FS_IOC_GET_ENCRYPTION_NONCE		_IOR('f', 27, __u8[16])
 
 /**********************************************************************/
 
diff --git a/tools/include/uapi/linux/kvm.h b/tools/include/uapi/linux/kvm.h
index 4b95f9a..428c7dd 100644
--- a/tools/include/uapi/linux/kvm.h
+++ b/tools/include/uapi/linux/kvm.h
@@ -474,12 +474,17 @@ struct kvm_s390_mem_op {
 	__u32 size;		/* amount of bytes */
 	__u32 op;		/* type of operation */
 	__u64 buf;		/* buffer in userspace */
-	__u8 ar;		/* the access register number */
-	__u8 reserved[31];	/* should be set to 0 */
+	union {
+		__u8 ar;	/* the access register number */
+		__u32 sida_offset; /* offset into the sida */
+		__u8 reserved[32]; /* should be set to 0 */
+	};
 };
 /* types for kvm_s390_mem_op->op */
 #define KVM_S390_MEMOP_LOGICAL_READ	0
 #define KVM_S390_MEMOP_LOGICAL_WRITE	1
+#define KVM_S390_MEMOP_SIDA_READ	2
+#define KVM_S390_MEMOP_SIDA_WRITE	3
 /* flags for kvm_s390_mem_op->flags */
 #define KVM_S390_MEMOP_F_CHECK_ONLY		(1ULL << 0)
 #define KVM_S390_MEMOP_F_INJECT_EXCEPTION	(1ULL << 1)
@@ -1010,6 +1015,8 @@ struct kvm_ppc_resize_hpt {
 #define KVM_CAP_ARM_NISV_TO_USER 177
 #define KVM_CAP_ARM_INJECT_EXT_DABT 178
 #define KVM_CAP_S390_VCPU_RESETS 179
+#define KVM_CAP_S390_PROTECTED 180
+#define KVM_CAP_PPC_SECURE_GUEST 181
 
 #ifdef KVM_CAP_IRQ_ROUTING
 
@@ -1478,6 +1485,39 @@ struct kvm_enc_region {
 #define KVM_S390_NORMAL_RESET	_IO(KVMIO,   0xc3)
 #define KVM_S390_CLEAR_RESET	_IO(KVMIO,   0xc4)
 
+struct kvm_s390_pv_sec_parm {
+	__u64 origin;
+	__u64 length;
+};
+
+struct kvm_s390_pv_unp {
+	__u64 addr;
+	__u64 size;
+	__u64 tweak;
+};
+
+enum pv_cmd_id {
+	KVM_PV_ENABLE,
+	KVM_PV_DISABLE,
+	KVM_PV_SET_SEC_PARMS,
+	KVM_PV_UNPACK,
+	KVM_PV_VERIFY,
+	KVM_PV_PREP_RESET,
+	KVM_PV_UNSHARE_ALL,
+};
+
+struct kvm_pv_cmd {
+	__u32 cmd;	/* Command to be executed */
+	__u16 rc;	/* Ultravisor return code */
+	__u16 rrc;	/* Ultravisor return reason code */
+	__u64 data;	/* Data or address */
+	__u32 flags;    /* flags for future extensions. Must be 0 for now */
+	__u32 reserved[3];
+};
+
+/* Available with KVM_CAP_S390_PROTECTED */
+#define KVM_S390_PV_COMMAND		_IOWR(KVMIO, 0xc5, struct kvm_pv_cmd)
+
 /* Secure Encrypted Virtualization command */
 enum sev_cmd_id {
 	/* Guest initialization commands */
@@ -1628,4 +1668,7 @@ struct kvm_hyperv_eventfd {
 #define KVM_HYPERV_CONN_ID_MASK		0x00ffffff
 #define KVM_HYPERV_EVENTFD_DEASSIGN	(1 << 0)
 
+#define KVM_DIRTY_LOG_MANUAL_PROTECT_ENABLE    (1 << 0)
+#define KVM_DIRTY_LOG_INITIALLY_SET            (1 << 1)
+
 #endif /* __LINUX_KVM_H */
diff --git a/tools/include/uapi/linux/mman.h b/tools/include/uapi/linux/mman.h
index fc1a64c..923cc16 100644
--- a/tools/include/uapi/linux/mman.h
+++ b/tools/include/uapi/linux/mman.h
@@ -5,8 +5,9 @@
 #include <asm/mman.h>
 #include <asm-generic/hugetlb_encode.h>
 
-#define MREMAP_MAYMOVE	1
-#define MREMAP_FIXED	2
+#define MREMAP_MAYMOVE		1
+#define MREMAP_FIXED		2
+#define MREMAP_DONTUNMAP	4
 
 #define OVERCOMMIT_GUESS		0
 #define OVERCOMMIT_ALWAYS		1
diff --git a/tools/include/uapi/linux/perf_event.h b/tools/include/uapi/linux/perf_event.h
index 397cfd6..7b2d6fc 100644
--- a/tools/include/uapi/linux/perf_event.h
+++ b/tools/include/uapi/linux/perf_event.h
@@ -142,8 +142,9 @@ enum perf_event_sample_format {
 	PERF_SAMPLE_REGS_INTR			= 1U << 18,
 	PERF_SAMPLE_PHYS_ADDR			= 1U << 19,
 	PERF_SAMPLE_AUX				= 1U << 20,
+	PERF_SAMPLE_CGROUP			= 1U << 21,
 
-	PERF_SAMPLE_MAX = 1U << 21,		/* non-ABI */
+	PERF_SAMPLE_MAX = 1U << 22,		/* non-ABI */
 
 	__PERF_SAMPLE_CALLCHAIN_EARLY		= 1ULL << 63, /* non-ABI; internal use */
 };
@@ -381,7 +382,8 @@ struct perf_event_attr {
 				ksymbol        :  1, /* include ksymbol events */
 				bpf_event      :  1, /* include bpf events */
 				aux_output     :  1, /* generate AUX records instead of events */
-				__reserved_1   : 32;
+				cgroup         :  1, /* include cgroup events */
+				__reserved_1   : 31;
 
 	union {
 		__u32		wakeup_events;	  /* wakeup every n events */
@@ -1012,6 +1014,16 @@ enum perf_event_type {
 	 */
 	PERF_RECORD_BPF_EVENT			= 18,
 
+	/*
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *	u64				id;
+	 *	char				path[];
+	 *	struct sample_id		sample_id;
+	 * };
+	 */
+	PERF_RECORD_CGROUP			= 19,
+
 	PERF_RECORD_MAX,			/* non-ABI */
 };
 
diff --git a/tools/include/uapi/linux/sched.h b/tools/include/uapi/linux/sched.h
index 2e3bc22..3bac0a8 100644
--- a/tools/include/uapi/linux/sched.h
+++ b/tools/include/uapi/linux/sched.h
@@ -35,6 +35,7 @@
 
 /* Flags for the clone3() syscall. */
 #define CLONE_CLEAR_SIGHAND 0x100000000ULL /* Clear any signal handler and reset to SIG_DFL. */
+#define CLONE_INTO_CGROUP 0x200000000ULL /* Clone into a specific cgroup given the right permissions. */
 
 /*
  * cloning flags intersect with CSIGNAL so can be used with unshare and clone3
@@ -81,6 +82,8 @@
  * @set_tid_size: This defines the size of the array referenced
  *                in @set_tid. This cannot be larger than the
  *                kernel's limit of nested PID namespaces.
+ * @cgroup:       If CLONE_INTO_CGROUP is specified set this to
+ *                a file descriptor for the cgroup.
  *
  * The structure is versioned by size and thus extensible.
  * New struct members must go at the end of the struct and
@@ -97,11 +100,13 @@ struct clone_args {
 	__aligned_u64 tls;
 	__aligned_u64 set_tid;
 	__aligned_u64 set_tid_size;
+	__aligned_u64 cgroup;
 };
 #endif
 
 #define CLONE_ARGS_SIZE_VER0 64 /* sizeof first published struct */
 #define CLONE_ARGS_SIZE_VER1 80 /* sizeof second published struct */
+#define CLONE_ARGS_SIZE_VER2 88 /* sizeof third published struct */
 
 /*
  * Scheduling policies
diff --git a/tools/include/uapi/linux/vhost.h b/tools/include/uapi/linux/vhost.h
index 40d028e..9fe72e4 100644
--- a/tools/include/uapi/linux/vhost.h
+++ b/tools/include/uapi/linux/vhost.h
@@ -116,4 +116,28 @@
 #define VHOST_VSOCK_SET_GUEST_CID	_IOW(VHOST_VIRTIO, 0x60, __u64)
 #define VHOST_VSOCK_SET_RUNNING		_IOW(VHOST_VIRTIO, 0x61, int)
 
+/* VHOST_VDPA specific defines */
+
+/* Get the device id. The device ids follow the same definition of
+ * the device id defined in virtio-spec.
+ */
+#define VHOST_VDPA_GET_DEVICE_ID	_IOR(VHOST_VIRTIO, 0x70, __u32)
+/* Get and set the status. The status bits follow the same definition
+ * of the device status defined in virtio-spec.
+ */
+#define VHOST_VDPA_GET_STATUS		_IOR(VHOST_VIRTIO, 0x71, __u8)
+#define VHOST_VDPA_SET_STATUS		_IOW(VHOST_VIRTIO, 0x72, __u8)
+/* Get and set the device config. The device config follows the same
+ * definition of the device config defined in virtio-spec.
+ */
+#define VHOST_VDPA_GET_CONFIG		_IOR(VHOST_VIRTIO, 0x73, \
+					     struct vhost_vdpa_config)
+#define VHOST_VDPA_SET_CONFIG		_IOW(VHOST_VIRTIO, 0x74, \
+					     struct vhost_vdpa_config)
+/* Enable/disable the ring. */
+#define VHOST_VDPA_SET_VRING_ENABLE	_IOW(VHOST_VIRTIO, 0x75, \
+					     struct vhost_vring_state)
+/* Get the max ring size. */
+#define VHOST_VDPA_GET_VRING_NUM	_IOR(VHOST_VIRTIO, 0x76, __u16)
+
 #endif
diff --git a/tools/include/vdso/bits.h b/tools/include/vdso/bits.h
new file mode 100644
index 0000000..6d005a1
--- /dev/null
+++ b/tools/include/vdso/bits.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __VDSO_BITS_H
+#define __VDSO_BITS_H
+
+#include <vdso/const.h>
+
+#define BIT(nr)			(UL(1) << (nr))
+
+#endif	/* __VDSO_BITS_H */
diff --git a/tools/include/vdso/const.h b/tools/include/vdso/const.h
new file mode 100644
index 0000000..94b385a
--- /dev/null
+++ b/tools/include/vdso/const.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __VDSO_CONST_H
+#define __VDSO_CONST_H
+
+#include <uapi/linux/const.h>
+
+#define UL(x)		(_UL(x))
+#define ULL(x)		(_ULL(x))
+
+#endif /* __VDSO_CONST_H */
diff --git a/tools/laptop/dslm/.gitignore b/tools/laptop/dslm/.gitignore
index 9fc984e..f7f1296 100644
--- a/tools/laptop/dslm/.gitignore
+++ b/tools/laptop/dslm/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 dslm
diff --git a/tools/laptop/freefall/freefall.c b/tools/laptop/freefall/freefall.c
index d29a86c..d77d786 100644
--- a/tools/laptop/freefall/freefall.c
+++ b/tools/laptop/freefall/freefall.c
@@ -4,7 +4,7 @@
  * Copyright 2008 Eric Piel
  * Copyright 2009 Pavel Machek <pavel@ucw.cz>
  * Copyright 2012 Sonal Santan
- * Copyright 2014 Pali Rohár <pali.rohar@gmail.com>
+ * Copyright 2014 Pali Rohár <pali@kernel.org>
  */
 
 #include <stdio.h>
diff --git a/tools/leds/.gitignore b/tools/leds/.gitignore
index ac96d9f..06bd3ee 100644
--- a/tools/leds/.gitignore
+++ b/tools/leds/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 uledmon
diff --git a/tools/lib/bpf/.gitignore b/tools/lib/bpf/.gitignore
index e97c2eb..8a81b36 100644
--- a/tools/lib/bpf/.gitignore
+++ b/tools/lib/bpf/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 libbpf_version.h
 libbpf.pc
 FEATURE-DUMP.libbpf
diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c
index ff917428..8f480e2 100644
--- a/tools/lib/bpf/libbpf.c
+++ b/tools/lib/bpf/libbpf.c
@@ -178,6 +178,8 @@ struct bpf_capabilities {
 	__u32 array_mmap:1;
 	/* BTF_FUNC_GLOBAL is supported */
 	__u32 btf_func_global:1;
+	/* kernel support for expected_attach_type in BPF_PROG_LOAD */
+	__u32 exp_attach_type:1;
 };
 
 enum reloc_type {
@@ -194,6 +196,22 @@ struct reloc_desc {
 	int sym_off;
 };
 
+struct bpf_sec_def;
+
+typedef struct bpf_link *(*attach_fn_t)(const struct bpf_sec_def *sec,
+					struct bpf_program *prog);
+
+struct bpf_sec_def {
+	const char *sec;
+	size_t len;
+	enum bpf_prog_type prog_type;
+	enum bpf_attach_type expected_attach_type;
+	bool is_exp_attach_type_optional;
+	bool is_attachable;
+	bool is_attach_btf;
+	attach_fn_t attach_fn;
+};
+
 /*
  * bpf_prog should be a better name but it has been used in
  * linux/filter.h.
@@ -204,6 +222,7 @@ struct bpf_program {
 	char *name;
 	int prog_ifindex;
 	char *section_name;
+	const struct bpf_sec_def *sec_def;
 	/* section_name with / replaced by _; makes recursive pinning
 	 * in bpf_object__pin_programs easier
 	 */
@@ -3316,6 +3335,37 @@ static int bpf_object__probe_array_mmap(struct bpf_object *obj)
 }
 
 static int
+bpf_object__probe_exp_attach_type(struct bpf_object *obj)
+{
+	struct bpf_load_program_attr attr;
+	struct bpf_insn insns[] = {
+		BPF_MOV64_IMM(BPF_REG_0, 0),
+		BPF_EXIT_INSN(),
+	};
+	int fd;
+
+	memset(&attr, 0, sizeof(attr));
+	/* use any valid combination of program type and (optional)
+	 * non-zero expected attach type (i.e., not a BPF_CGROUP_INET_INGRESS)
+	 * to see if kernel supports expected_attach_type field for
+	 * BPF_PROG_LOAD command
+	 */
+	attr.prog_type = BPF_PROG_TYPE_CGROUP_SOCK;
+	attr.expected_attach_type = BPF_CGROUP_INET_SOCK_CREATE;
+	attr.insns = insns;
+	attr.insns_cnt = ARRAY_SIZE(insns);
+	attr.license = "GPL";
+
+	fd = bpf_load_program_xattr(&attr, NULL, 0);
+	if (fd >= 0) {
+		obj->caps.exp_attach_type = 1;
+		close(fd);
+		return 1;
+	}
+	return 0;
+}
+
+static int
 bpf_object__probe_caps(struct bpf_object *obj)
 {
 	int (*probe_fn[])(struct bpf_object *obj) = {
@@ -3325,6 +3375,7 @@ bpf_object__probe_caps(struct bpf_object *obj)
 		bpf_object__probe_btf_func_global,
 		bpf_object__probe_btf_datasec,
 		bpf_object__probe_array_mmap,
+		bpf_object__probe_exp_attach_type,
 	};
 	int i, ret;
 
@@ -4861,7 +4912,12 @@ load_program(struct bpf_program *prog, struct bpf_insn *insns, int insns_cnt,
 
 	memset(&load_attr, 0, sizeof(struct bpf_load_program_attr));
 	load_attr.prog_type = prog->type;
-	load_attr.expected_attach_type = prog->expected_attach_type;
+	/* old kernels might not support specifying expected_attach_type */
+	if (!prog->caps->exp_attach_type && prog->sec_def &&
+	    prog->sec_def->is_exp_attach_type_optional)
+		load_attr.expected_attach_type = 0;
+	else
+		load_attr.expected_attach_type = prog->expected_attach_type;
 	if (prog->caps->name)
 		load_attr.name = prog->name;
 	load_attr.insns = insns;
@@ -5062,6 +5118,8 @@ bpf_object__load_progs(struct bpf_object *obj, int log_level)
 	return 0;
 }
 
+static const struct bpf_sec_def *find_sec_def(const char *sec_name);
+
 static struct bpf_object *
 __bpf_object__open(const char *path, const void *obj_buf, size_t obj_buf_sz,
 		   const struct bpf_object_open_opts *opts)
@@ -5117,24 +5175,17 @@ __bpf_object__open(const char *path, const void *obj_buf, size_t obj_buf_sz,
 	bpf_object__elf_finish(obj);
 
 	bpf_object__for_each_program(prog, obj) {
-		enum bpf_prog_type prog_type;
-		enum bpf_attach_type attach_type;
-
-		if (prog->type != BPF_PROG_TYPE_UNSPEC)
-			continue;
-
-		err = libbpf_prog_type_by_name(prog->section_name, &prog_type,
-					       &attach_type);
-		if (err == -ESRCH)
+		prog->sec_def = find_sec_def(prog->section_name);
+		if (!prog->sec_def)
 			/* couldn't guess, but user might manually specify */
 			continue;
-		if (err)
-			goto out;
 
-		bpf_program__set_type(prog, prog_type);
-		bpf_program__set_expected_attach_type(prog, attach_type);
-		if (prog_type == BPF_PROG_TYPE_TRACING ||
-		    prog_type == BPF_PROG_TYPE_EXT)
+		bpf_program__set_type(prog, prog->sec_def->prog_type);
+		bpf_program__set_expected_attach_type(prog,
+				prog->sec_def->expected_attach_type);
+
+		if (prog->sec_def->prog_type == BPF_PROG_TYPE_TRACING ||
+		    prog->sec_def->prog_type == BPF_PROG_TYPE_EXT)
 			prog->attach_prog_fd = OPTS_GET(opts, attach_prog_fd, 0);
 	}
 
@@ -6223,23 +6274,32 @@ void bpf_program__set_expected_attach_type(struct bpf_program *prog,
 	prog->expected_attach_type = type;
 }
 
-#define BPF_PROG_SEC_IMPL(string, ptype, eatype, is_attachable, btf, atype) \
-	{ string, sizeof(string) - 1, ptype, eatype, is_attachable, btf, atype }
+#define BPF_PROG_SEC_IMPL(string, ptype, eatype, eatype_optional,	    \
+			  attachable, attach_btf)			    \
+	{								    \
+		.sec = string,						    \
+		.len = sizeof(string) - 1,				    \
+		.prog_type = ptype,					    \
+		.expected_attach_type = eatype,				    \
+		.is_exp_attach_type_optional = eatype_optional,		    \
+		.is_attachable = attachable,				    \
+		.is_attach_btf = attach_btf,				    \
+	}
 
 /* Programs that can NOT be attached. */
 #define BPF_PROG_SEC(string, ptype) BPF_PROG_SEC_IMPL(string, ptype, 0, 0, 0, 0)
 
 /* Programs that can be attached. */
 #define BPF_APROG_SEC(string, ptype, atype) \
-	BPF_PROG_SEC_IMPL(string, ptype, 0, 1, 0, atype)
+	BPF_PROG_SEC_IMPL(string, ptype, atype, true, 1, 0)
 
 /* Programs that must specify expected attach type at load time. */
 #define BPF_EAPROG_SEC(string, ptype, eatype) \
-	BPF_PROG_SEC_IMPL(string, ptype, eatype, 1, 0, eatype)
+	BPF_PROG_SEC_IMPL(string, ptype, eatype, false, 1, 0)
 
 /* Programs that use BTF to identify attach point */
 #define BPF_PROG_BTF(string, ptype, eatype) \
-	BPF_PROG_SEC_IMPL(string, ptype, eatype, 0, 1, 0)
+	BPF_PROG_SEC_IMPL(string, ptype, eatype, false, 0, 1)
 
 /* Programs that can be attached but attach type can't be identified by section
  * name. Kept for backward compatibility.
@@ -6253,11 +6313,6 @@ void bpf_program__set_expected_attach_type(struct bpf_program *prog,
 	__VA_ARGS__							    \
 }
 
-struct bpf_sec_def;
-
-typedef struct bpf_link *(*attach_fn_t)(const struct bpf_sec_def *sec,
-					struct bpf_program *prog);
-
 static struct bpf_link *attach_kprobe(const struct bpf_sec_def *sec,
 				      struct bpf_program *prog);
 static struct bpf_link *attach_tp(const struct bpf_sec_def *sec,
@@ -6269,17 +6324,6 @@ static struct bpf_link *attach_trace(const struct bpf_sec_def *sec,
 static struct bpf_link *attach_lsm(const struct bpf_sec_def *sec,
 				   struct bpf_program *prog);
 
-struct bpf_sec_def {
-	const char *sec;
-	size_t len;
-	enum bpf_prog_type prog_type;
-	enum bpf_attach_type expected_attach_type;
-	bool is_attachable;
-	bool is_attach_btf;
-	enum bpf_attach_type attach_type;
-	attach_fn_t attach_fn;
-};
-
 static const struct bpf_sec_def section_defs[] = {
 	BPF_PROG_SEC("socket",			BPF_PROG_TYPE_SOCKET_FILTER),
 	BPF_PROG_SEC("sk_reuseport",		BPF_PROG_TYPE_SK_REUSEPORT),
@@ -6713,7 +6757,7 @@ int libbpf_attach_type_by_name(const char *name,
 			continue;
 		if (!section_defs[i].is_attachable)
 			return -EINVAL;
-		*attach_type = section_defs[i].attach_type;
+		*attach_type = section_defs[i].expected_attach_type;
 		return 0;
 	}
 	pr_debug("failed to guess attach type based on ELF section name '%s'\n", name);
@@ -7542,7 +7586,6 @@ static struct bpf_link *attach_lsm(const struct bpf_sec_def *sec,
 struct bpf_link *
 bpf_program__attach_cgroup(struct bpf_program *prog, int cgroup_fd)
 {
-	const struct bpf_sec_def *sec_def;
 	enum bpf_attach_type attach_type;
 	char errmsg[STRERR_BUFSIZE];
 	struct bpf_link *link;
@@ -7561,11 +7604,6 @@ bpf_program__attach_cgroup(struct bpf_program *prog, int cgroup_fd)
 	link->detach = &bpf_link__detach_fd;
 
 	attach_type = bpf_program__get_expected_attach_type(prog);
-	if (!attach_type) {
-		sec_def = find_sec_def(bpf_program__title(prog, false));
-		if (sec_def)
-			attach_type = sec_def->attach_type;
-	}
 	link_fd = bpf_link_create(prog_fd, cgroup_fd, attach_type, NULL);
 	if (link_fd < 0) {
 		link_fd = -errno;
diff --git a/tools/lib/bpf/libbpf.h b/tools/lib/bpf/libbpf.h
index 44df1d3..f1dacec 100644
--- a/tools/lib/bpf/libbpf.h
+++ b/tools/lib/bpf/libbpf.h
@@ -458,7 +458,7 @@ struct xdp_link_info {
 
 struct bpf_xdp_set_link_opts {
 	size_t sz;
-	__u32 old_fd;
+	int old_fd;
 };
 #define bpf_xdp_set_link_opts__last_field old_fd
 
diff --git a/tools/lib/bpf/netlink.c b/tools/lib/bpf/netlink.c
index 18b5319..0b709fd 100644
--- a/tools/lib/bpf/netlink.c
+++ b/tools/lib/bpf/netlink.c
@@ -142,7 +142,7 @@ static int __bpf_set_link_xdp_fd_replace(int ifindex, int fd, int old_fd,
 		struct ifinfomsg ifinfo;
 		char             attrbuf[64];
 	} req;
-	__u32 nl_pid;
+	__u32 nl_pid = 0;
 
 	sock = libbpf_netlink_open(&nl_pid);
 	if (sock < 0)
@@ -288,7 +288,7 @@ int bpf_get_link_xdp_info(int ifindex, struct xdp_link_info *info,
 {
 	struct xdp_id_md xdp_id = {};
 	int sock, ret;
-	__u32 nl_pid;
+	__u32 nl_pid = 0;
 	__u32 mask;
 
 	if (flags & ~XDP_FLAGS_MASK || !info_size)
@@ -321,7 +321,7 @@ int bpf_get_link_xdp_info(int ifindex, struct xdp_link_info *info,
 
 static __u32 get_xdp_id(struct xdp_link_info *info, __u32 flags)
 {
-	if (info->attach_mode != XDP_ATTACHED_MULTI)
+	if (info->attach_mode != XDP_ATTACHED_MULTI && !flags)
 		return info->prog_id;
 	if (flags & XDP_FLAGS_DRV_MODE)
 		return info->drv_prog_id;
diff --git a/tools/lib/lockdep/.gitignore b/tools/lib/lockdep/.gitignore
index cc0e7a9..6c308ac 100644
--- a/tools/lib/lockdep/.gitignore
+++ b/tools/lib/lockdep/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 liblockdep.so.*
diff --git a/tools/lib/perf/include/perf/event.h b/tools/lib/perf/include/perf/event.h
index 1810689..69b44d2 100644
--- a/tools/lib/perf/include/perf/event.h
+++ b/tools/lib/perf/include/perf/event.h
@@ -105,6 +105,12 @@ struct perf_record_bpf_event {
 	__u8			 tag[BPF_TAG_SIZE];  // prog tag
 };
 
+struct perf_record_cgroup {
+	struct perf_event_header header;
+	__u64			 id;
+	char			 path[PATH_MAX];
+};
+
 struct perf_record_sample {
 	struct perf_event_header header;
 	__u64			 array[];
@@ -352,6 +358,7 @@ union perf_event {
 	struct perf_record_mmap2		mmap2;
 	struct perf_record_comm			comm;
 	struct perf_record_namespaces		namespaces;
+	struct perf_record_cgroup		cgroup;
 	struct perf_record_fork			fork;
 	struct perf_record_lost			lost;
 	struct perf_record_lost_samples		lost_samples;
diff --git a/tools/lib/rbtree.c b/tools/lib/rbtree.c
index 2548ff8..06ac7bd 100644
--- a/tools/lib/rbtree.c
+++ b/tools/lib/rbtree.c
@@ -497,7 +497,7 @@ struct rb_node *rb_next(const struct rb_node *node)
 	if (node->rb_right) {
 		node = node->rb_right;
 		while (node->rb_left)
-			node=node->rb_left;
+			node = node->rb_left;
 		return (struct rb_node *)node;
 	}
 
@@ -528,7 +528,7 @@ struct rb_node *rb_prev(const struct rb_node *node)
 	if (node->rb_left) {
 		node = node->rb_left;
 		while (node->rb_right)
-			node=node->rb_right;
+			node = node->rb_right;
 		return (struct rb_node *)node;
 	}
 
diff --git a/tools/lib/traceevent/.gitignore b/tools/lib/traceevent/.gitignore
index 9e9f25f..7123c70 100644
--- a/tools/lib/traceevent/.gitignore
+++ b/tools/lib/traceevent/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 TRACEEVENT-CFLAGS
 libtraceevent-dynamic-list
 libtraceevent.so.*
diff --git a/tools/memory-model/.gitignore b/tools/memory-model/.gitignore
index b1d34c5..cf4cd66 100644
--- a/tools/memory-model/.gitignore
+++ b/tools/memory-model/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 litmus
diff --git a/tools/memory-model/litmus-tests/.gitignore b/tools/memory-model/litmus-tests/.gitignore
index 6e2ddc54..c492a1d 100644
--- a/tools/memory-model/litmus-tests/.gitignore
+++ b/tools/memory-model/litmus-tests/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 *.litmus.out
diff --git a/tools/objtool/.gitignore b/tools/objtool/.gitignore
index 914cff1..45cefda 100644
--- a/tools/objtool/.gitignore
+++ b/tools/objtool/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 arch/x86/lib/inat-tables.c
 objtool
 fixdep
diff --git a/tools/objtool/Makefile b/tools/objtool/Makefile
index ee08aef..f591c4d 100644
--- a/tools/objtool/Makefile
+++ b/tools/objtool/Makefile
@@ -3,9 +3,15 @@
 include ../scripts/Makefile.arch
 
 # always use the host compiler
+ifneq ($(LLVM),)
+HOSTAR	?= llvm-ar
+HOSTCC	?= clang
+HOSTLD	?= ld.lld
+else
 HOSTAR	?= ar
 HOSTCC	?= gcc
 HOSTLD	?= ld
+endif
 AR	 = $(HOSTAR)
 CC	 = $(HOSTCC)
 LD	 = $(HOSTLD)
diff --git a/tools/objtool/check.c b/tools/objtool/check.c
index 8dd01f9..4b170fd 100644
--- a/tools/objtool/check.c
+++ b/tools/objtool/check.c
@@ -1050,10 +1050,7 @@ static struct rela *find_jump_table(struct objtool_file *file,
 	 * it.
 	 */
 	for (;
-	     &insn->list != &file->insn_list &&
-	     insn->sec == func->sec &&
-	     insn->offset >= func->offset;
-
+	     &insn->list != &file->insn_list && insn->func && insn->func->pfunc == func;
 	     insn = insn->first_jump_src ?: list_prev_entry(insn, list)) {
 
 		if (insn != orig_insn && insn->type == INSN_JUMP_DYNAMIC)
@@ -2008,8 +2005,8 @@ static int validate_return(struct symbol *func, struct instruction *insn, struct
 	}
 
 	if (state->bp_scratch) {
-		WARN("%s uses BP as a scratch register",
-		     func->name);
+		WARN_FUNC("BP used as a scratch register",
+			  insn->sec, insn->offset);
 		return 1;
 	}
 
@@ -2364,14 +2361,27 @@ static bool ignore_unreachable_insn(struct instruction *insn)
 	    !strcmp(insn->sec->name, ".altinstr_aux"))
 		return true;
 
+	if (!insn->func)
+		return false;
+
+	/*
+	 * CONFIG_UBSAN_TRAP inserts a UD2 when it sees
+	 * __builtin_unreachable().  The BUG() macro has an unreachable() after
+	 * the UD2, which causes GCC's undefined trap logic to emit another UD2
+	 * (or occasionally a JMP to UD2).
+	 */
+	if (list_prev_entry(insn, list)->dead_end &&
+	    (insn->type == INSN_BUG ||
+	     (insn->type == INSN_JUMP_UNCONDITIONAL &&
+	      insn->jump_dest && insn->jump_dest->type == INSN_BUG)))
+		return true;
+
 	/*
 	 * Check if this (or a subsequent) instruction is related to
 	 * CONFIG_UBSAN or CONFIG_KASAN.
 	 *
 	 * End the search at 5 instructions to avoid going into the weeds.
 	 */
-	if (!insn->func)
-		return false;
 	for (i = 0; i < 5; i++) {
 
 		if (is_kasan_insn(insn) || is_ubsan_insn(insn))
diff --git a/tools/objtool/orc_dump.c b/tools/objtool/orc_dump.c
index 13ccf77..ba4cbb1 100644
--- a/tools/objtool/orc_dump.c
+++ b/tools/objtool/orc_dump.c
@@ -66,7 +66,7 @@ int orc_dump(const char *_objname)
 	char *name;
 	size_t nr_sections;
 	Elf64_Addr orc_ip_addr = 0;
-	size_t shstrtab_idx;
+	size_t shstrtab_idx, strtab_idx = 0;
 	Elf *elf;
 	Elf_Scn *scn;
 	GElf_Shdr sh;
@@ -127,6 +127,8 @@ int orc_dump(const char *_objname)
 
 		if (!strcmp(name, ".symtab")) {
 			symtab = data;
+		} else if (!strcmp(name, ".strtab")) {
+			strtab_idx = i;
 		} else if (!strcmp(name, ".orc_unwind")) {
 			orc = data->d_buf;
 			orc_size = sh.sh_size;
@@ -138,7 +140,7 @@ int orc_dump(const char *_objname)
 		}
 	}
 
-	if (!symtab || !orc || !orc_ip)
+	if (!symtab || !strtab_idx || !orc || !orc_ip)
 		return 0;
 
 	if (orc_size % sizeof(*orc) != 0) {
@@ -159,21 +161,29 @@ int orc_dump(const char *_objname)
 				return -1;
 			}
 
-			scn = elf_getscn(elf, sym.st_shndx);
-			if (!scn) {
-				WARN_ELF("elf_getscn");
-				return -1;
-			}
+			if (GELF_ST_TYPE(sym.st_info) == STT_SECTION) {
+				scn = elf_getscn(elf, sym.st_shndx);
+				if (!scn) {
+					WARN_ELF("elf_getscn");
+					return -1;
+				}
 
-			if (!gelf_getshdr(scn, &sh)) {
-				WARN_ELF("gelf_getshdr");
-				return -1;
-			}
+				if (!gelf_getshdr(scn, &sh)) {
+					WARN_ELF("gelf_getshdr");
+					return -1;
+				}
 
-			name = elf_strptr(elf, shstrtab_idx, sh.sh_name);
-			if (!name || !*name) {
-				WARN_ELF("elf_strptr");
-				return -1;
+				name = elf_strptr(elf, shstrtab_idx, sh.sh_name);
+				if (!name) {
+					WARN_ELF("elf_strptr");
+					return -1;
+				}
+			} else {
+				name = elf_strptr(elf, strtab_idx, sym.st_name);
+				if (!name) {
+					WARN_ELF("elf_strptr");
+					return -1;
+				}
 			}
 
 			printf("%s+%llx:", name, (unsigned long long)rela.r_addend);
diff --git a/tools/objtool/orc_gen.c b/tools/objtool/orc_gen.c
index 41e4a27..4c0dabd 100644
--- a/tools/objtool/orc_gen.c
+++ b/tools/objtool/orc_gen.c
@@ -88,11 +88,6 @@ static int create_orc_entry(struct elf *elf, struct section *u_sec, struct secti
 	struct orc_entry *orc;
 	struct rela *rela;
 
-	if (!insn_sec->sym) {
-		WARN("missing symbol for section %s", insn_sec->name);
-		return -1;
-	}
-
 	/* populate ORC data */
 	orc = (struct orc_entry *)u_sec->data->d_buf + idx;
 	memcpy(orc, o, sizeof(*orc));
@@ -105,8 +100,32 @@ static int create_orc_entry(struct elf *elf, struct section *u_sec, struct secti
 	}
 	memset(rela, 0, sizeof(*rela));
 
-	rela->sym = insn_sec->sym;
-	rela->addend = insn_off;
+	if (insn_sec->sym) {
+		rela->sym = insn_sec->sym;
+		rela->addend = insn_off;
+	} else {
+		/*
+		 * The Clang assembler doesn't produce section symbols, so we
+		 * have to reference the function symbol instead:
+		 */
+		rela->sym = find_symbol_containing(insn_sec, insn_off);
+		if (!rela->sym) {
+			/*
+			 * Hack alert.  This happens when we need to reference
+			 * the NOP pad insn immediately after the function.
+			 */
+			rela->sym = find_symbol_containing(insn_sec,
+							   insn_off - 1);
+		}
+		if (!rela->sym) {
+			WARN("missing symbol for insn at offset 0x%lx\n",
+			     insn_off);
+			return -1;
+		}
+
+		rela->addend = insn_off - rela->sym->offset;
+	}
+
 	rela->type = R_X86_64_PC32;
 	rela->offset = idx * sizeof(int);
 	rela->sec = ip_relasec;
diff --git a/tools/pci/pcitest.c b/tools/pci/pcitest.c
index 32b7c6f..0a1344c 100644
--- a/tools/pci/pcitest.c
+++ b/tools/pci/pcitest.c
@@ -30,14 +30,17 @@ struct pci_test {
 	int		irqtype;
 	bool		set_irqtype;
 	bool		get_irqtype;
+	bool		clear_irq;
 	bool		read;
 	bool		write;
 	bool		copy;
 	unsigned long	size;
+	bool		use_dma;
 };
 
 static int run_test(struct pci_test *test)
 {
+	struct pci_endpoint_test_xfer_param param;
 	int ret = -EINVAL;
 	int fd;
 
@@ -74,6 +77,15 @@ static int run_test(struct pci_test *test)
 			fprintf(stdout, "%s\n", irq[ret]);
 	}
 
+	if (test->clear_irq) {
+		ret = ioctl(fd, PCITEST_CLEAR_IRQ);
+		fprintf(stdout, "CLEAR IRQ:\t\t");
+		if (ret < 0)
+			fprintf(stdout, "FAILED\n");
+		else
+			fprintf(stdout, "%s\n", result[ret]);
+	}
+
 	if (test->legacyirq) {
 		ret = ioctl(fd, PCITEST_LEGACY_IRQ, 0);
 		fprintf(stdout, "LEGACY IRQ:\t");
@@ -102,7 +114,10 @@ static int run_test(struct pci_test *test)
 	}
 
 	if (test->write) {
-		ret = ioctl(fd, PCITEST_WRITE, test->size);
+		param.size = test->size;
+		if (test->use_dma)
+			param.flags = PCITEST_FLAGS_USE_DMA;
+		ret = ioctl(fd, PCITEST_WRITE, &param);
 		fprintf(stdout, "WRITE (%7ld bytes):\t\t", test->size);
 		if (ret < 0)
 			fprintf(stdout, "TEST FAILED\n");
@@ -111,7 +126,10 @@ static int run_test(struct pci_test *test)
 	}
 
 	if (test->read) {
-		ret = ioctl(fd, PCITEST_READ, test->size);
+		param.size = test->size;
+		if (test->use_dma)
+			param.flags = PCITEST_FLAGS_USE_DMA;
+		ret = ioctl(fd, PCITEST_READ, &param);
 		fprintf(stdout, "READ (%7ld bytes):\t\t", test->size);
 		if (ret < 0)
 			fprintf(stdout, "TEST FAILED\n");
@@ -120,7 +138,10 @@ static int run_test(struct pci_test *test)
 	}
 
 	if (test->copy) {
-		ret = ioctl(fd, PCITEST_COPY, test->size);
+		param.size = test->size;
+		if (test->use_dma)
+			param.flags = PCITEST_FLAGS_USE_DMA;
+		ret = ioctl(fd, PCITEST_COPY, &param);
 		fprintf(stdout, "COPY (%7ld bytes):\t\t", test->size);
 		if (ret < 0)
 			fprintf(stdout, "TEST FAILED\n");
@@ -153,7 +174,7 @@ int main(int argc, char **argv)
 	/* set default endpoint device */
 	test->device = "/dev/pci-endpoint-test.0";
 
-	while ((c = getopt(argc, argv, "D:b:m:x:i:Ilhrwcs:")) != EOF)
+	while ((c = getopt(argc, argv, "D:b:m:x:i:deIlhrwcs:")) != EOF)
 	switch (c) {
 	case 'D':
 		test->device = optarg;
@@ -194,9 +215,15 @@ int main(int argc, char **argv)
 	case 'c':
 		test->copy = true;
 		continue;
+	case 'e':
+		test->clear_irq = true;
+		continue;
 	case 's':
 		test->size = strtoul(optarg, NULL, 0);
 		continue;
+	case 'd':
+		test->use_dma = true;
+		continue;
 	case 'h':
 	default:
 usage:
@@ -208,7 +235,9 @@ int main(int argc, char **argv)
 			"\t-m <msi num>		MSI test (msi number between 1..32)\n"
 			"\t-x <msix num>	\tMSI-X test (msix number between 1..2048)\n"
 			"\t-i <irq type>	\tSet IRQ type (0 - Legacy, 1 - MSI, 2 - MSI-X)\n"
+			"\t-e			Clear IRQ\n"
 			"\t-I			Get current IRQ type configured\n"
+			"\t-d			Use DMA\n"
 			"\t-l			Legacy IRQ test\n"
 			"\t-r			Read buffer test\n"
 			"\t-w			Write buffer test\n"
diff --git a/tools/pcmcia/.gitignore b/tools/pcmcia/.gitignore
index 53d0813..94cb97b 100644
--- a/tools/pcmcia/.gitignore
+++ b/tools/pcmcia/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 crc32hash
diff --git a/tools/perf/.gitignore b/tools/perf/.gitignore
index bf1252d..f3f8478 100644
--- a/tools/perf/.gitignore
+++ b/tools/perf/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 PERF-CFLAGS
 PERF-GUI-VARS
 PERF-VERSION-FILE
diff --git a/tools/perf/Documentation/perf-config.txt b/tools/perf/Documentation/perf-config.txt
index 8ead555..f16d8a7 100644
--- a/tools/perf/Documentation/perf-config.txt
+++ b/tools/perf/Documentation/perf-config.txt
@@ -405,14 +405,16 @@
 		This option is only applied to TUI.
 
 call-graph.*::
-	When sub-commands 'top' and 'report' work with -g/—-children
-	there're options in control of call-graph.
+	The following controls the handling of call-graphs (obtained via the
+	-g/--call-graph options).
 
 	call-graph.record-mode::
-		The record-mode can be 'fp' (frame pointer), 'dwarf' and 'lbr'.
-		The value of 'dwarf' is effective only if perf detect needed library
-		(libunwind or a recent version of libdw).
-		'lbr' only work for cpus that support it.
+		The mode for user space can be 'fp' (frame pointer), 'dwarf'
+		and 'lbr'.  The value 'dwarf' is effective only if libunwind
+		(or a recent version of libdw) is present on the system;
+		the value 'lbr' only works for certain cpus. The method for
+		kernel space is controlled not by this option but by the
+		kernel config (CONFIG_UNWINDER_*).
 
 	call-graph.dump-size::
 		The size of stack to dump in order to do post-unwinding. Default is 8192 (byte).
diff --git a/tools/perf/Documentation/perf-record.txt b/tools/perf/Documentation/perf-record.txt
index 7f4db75..b3f3b3f 100644
--- a/tools/perf/Documentation/perf-record.txt
+++ b/tools/perf/Documentation/perf-record.txt
@@ -237,16 +237,22 @@
 	option and remains only for backward compatibility.  See --event.
 
 -g::
-	Enables call-graph (stack chain/backtrace) recording.
+	Enables call-graph (stack chain/backtrace) recording for both
+	kernel space and user space.
 
 --call-graph::
 	Setup and enable call-graph (stack chain/backtrace) recording,
-	implies -g.  Default is "fp".
+	implies -g.  Default is "fp" (for user space).
 
-	Allows specifying "fp" (frame pointer) or "dwarf"
-	(DWARF's CFI - Call Frame Information) or "lbr"
-	(Hardware Last Branch Record facility) as the method to collect
-	the information used to show the call graphs.
+	The unwinding method used for kernel space is dependent on the
+	unwinder used by the active kernel configuration, i.e
+	CONFIG_UNWINDER_FRAME_POINTER (fp) or CONFIG_UNWINDER_ORC (orc)
+
+	Any option specified here controls the method used for user space.
+
+	Valid options are "fp" (frame pointer), "dwarf" (DWARF's CFI -
+	Call Frame Information) or "lbr" (Hardware Last Branch Record
+	facility).
 
 	In some systems, where binaries are build with gcc
 	--fomit-frame-pointer, using the "fp" method will produce bogus
@@ -385,7 +391,10 @@
 abort events and some memory events in precise mode on modern Intel CPUs.
 
 --namespaces::
-Record events of type PERF_RECORD_NAMESPACES.
+Record events of type PERF_RECORD_NAMESPACES.  This enables 'cgroup_id' sort key.
+
+--all-cgroups::
+Record events of type PERF_RECORD_CGROUP.  This enables 'cgroup' sort key.
 
 --transaction::
 Record transaction flags for transaction related events.
diff --git a/tools/perf/Documentation/perf-report.txt b/tools/perf/Documentation/perf-report.txt
index bd0a029d..f569b9e 100644
--- a/tools/perf/Documentation/perf-report.txt
+++ b/tools/perf/Documentation/perf-report.txt
@@ -95,6 +95,7 @@
 	abort cost. This is the global weight.
 	- local_weight: Local weight version of the weight above.
 	- cgroup_id: ID derived from cgroup namespace device and inode numbers.
+	- cgroup: cgroup pathname in the cgroupfs.
 	- transaction: Transaction abort flags.
 	- overhead: Overhead percentage of sample
 	- overhead_sys: Overhead percentage of sample running in system mode
@@ -377,6 +378,11 @@
 	Show event group information together. It forces group output also
 	if there are no groups defined in data file.
 
+--group-sort-idx::
+	Sort the output by the event at the index n in group. If n is invalid,
+	sort by the first event. It can support multiple groups with different
+	amount of events. WARNING: This should be used on grouped events.
+
 --demangle::
 	Demangle symbol names to human readable form. It's enabled by default,
 	disable with --no-demangle.
diff --git a/tools/perf/Documentation/perf-script.txt b/tools/perf/Documentation/perf-script.txt
index db6a36a..963487e8 100644
--- a/tools/perf/Documentation/perf-script.txt
+++ b/tools/perf/Documentation/perf-script.txt
@@ -319,6 +319,9 @@
 --show-bpf-events
 	Display bpf events i.e. events of type PERF_RECORD_KSYMBOL and PERF_RECORD_BPF_EVENT.
 
+--show-cgroup-events
+	Display cgroup events i.e. events of type PERF_RECORD_CGROUP.
+
 --demangle::
 	Demangle symbol names to human readable form. It's enabled by default,
 	disable with --no-demangle.
@@ -390,6 +393,9 @@
 --reltime::
 	Print time stamps relative to trace start.
 
+--deltatime::
+	Print time stamps relative to previous event.
+
 --per-event-dump::
 	Create per event files with a "perf.data.EVENT.dump" name instead of
         printing to stdout, useful, for instance, for generating flamegraphs.
@@ -406,6 +412,14 @@
 --xed::
 	Run xed disassembler on output. Requires installing the xed disassembler.
 
+-S::
+--symbols=symbol[,symbol...]::
+	Only consider the listed symbols. Symbols are typically a name
+	but they may also be hexadecimal address.
+
+	For example, to select the symbol noploop or the address 0x4007a0:
+	perf script --symbols=noploop,0x4007a0
+
 --call-trace::
 	Show call stream for intel_pt traces. The CPUs are interleaved, but
 	can be filtered with -C.
diff --git a/tools/perf/Documentation/perf-top.txt b/tools/perf/Documentation/perf-top.txt
index 324b6b5..487737a 100644
--- a/tools/perf/Documentation/perf-top.txt
+++ b/tools/perf/Documentation/perf-top.txt
@@ -53,6 +53,11 @@
 --group::
         Put the counters into a counter group.
 
+--group-sort-idx::
+	Sort the output by the event at the index n in group. If n is invalid,
+	sort by the first event. It can support multiple groups with different
+	amount of events. WARNING: This should be used on grouped events.
+
 -F <freq>::
 --freq=<freq>::
 	Profile at this frequency. Use 'max' to use the currently maximum
@@ -272,6 +277,10 @@
 	Record events of type PERF_RECORD_NAMESPACES and display it with the
 	'cgroup_id' sort key.
 
+--all-cgroups::
+	Record events of type PERF_RECORD_CGROUP and display it with the
+	'cgroup' sort key.
+
 --switch-on EVENT_NAME::
 	Only consider events after this event is found.
 
diff --git a/tools/perf/Makefile.config b/tools/perf/Makefile.config
index 80e55e7..12a8204 100644
--- a/tools/perf/Makefile.config
+++ b/tools/perf/Makefile.config
@@ -228,8 +228,17 @@
 
 PYTHON_CONFIG_SQ := $(call shell-sq,$(PYTHON_CONFIG))
 
+# Python 3.8 changed the output of `python-config --ldflags` to not include the
+# '-lpythonX.Y' flag unless '--embed' is also passed. The feature check for
+# libpython fails if that flag is not included in LDFLAGS
+ifeq ($(shell $(PYTHON_CONFIG_SQ) --ldflags --embed 2>&1 1>/dev/null; echo $$?), 0)
+  PYTHON_CONFIG_LDFLAGS := --ldflags --embed
+else
+  PYTHON_CONFIG_LDFLAGS := --ldflags
+endif
+
 ifdef PYTHON_CONFIG
-  PYTHON_EMBED_LDOPTS := $(shell $(PYTHON_CONFIG_SQ) --ldflags 2>/dev/null)
+  PYTHON_EMBED_LDOPTS := $(shell $(PYTHON_CONFIG_SQ) $(PYTHON_CONFIG_LDFLAGS) 2>/dev/null)
   PYTHON_EMBED_LDFLAGS := $(call strip-libs,$(PYTHON_EMBED_LDOPTS))
   PYTHON_EMBED_LIBADD := $(call grep-libs,$(PYTHON_EMBED_LDOPTS)) -lutil
   PYTHON_EMBED_CCOPTS := $(shell $(PYTHON_CONFIG_SQ) --includes 2>/dev/null)
@@ -348,6 +357,10 @@
   CFLAGS += -DHAVE_GETTID
 endif
 
+ifeq ($(feature-file-handle), 1)
+  CFLAGS += -DHAVE_FILE_HANDLE
+endif
+
 ifdef NO_LIBELF
   NO_DWARF := 1
   NO_DEMANGLE := 1
diff --git a/tools/perf/Makefile.perf b/tools/perf/Makefile.perf
index 3eda9d4..d15a311 100644
--- a/tools/perf/Makefile.perf
+++ b/tools/perf/Makefile.perf
@@ -231,6 +231,7 @@
 BPF_DIR         = $(srctree)/tools/lib/bpf/
 SUBCMD_DIR      = $(srctree)/tools/lib/subcmd/
 LIBPERF_DIR     = $(srctree)/tools/lib/perf/
+DOC_DIR         = $(srctree)/tools/perf/Documentation/
 
 # Set FEATURE_TESTS to 'all' so all possible feature checkers are executed.
 # Without this setting the output feature dump file misses some features, for
@@ -573,7 +574,7 @@
 arch_errno_tbl := $(srctree)/tools/perf/trace/beauty/arch_errno_names.sh
 
 $(arch_errno_name_array): $(arch_errno_tbl)
-	$(Q)$(SHELL) '$(arch_errno_tbl)' $(CC) $(arch_errno_hdr_dir) > $@
+	$(Q)$(SHELL) '$(arch_errno_tbl)' $(firstword $(CC)) $(arch_errno_hdr_dir) > $@
 
 sync_file_range_arrays := $(beauty_outdir)/sync_file_range_arrays.c
 sync_file_range_tbls := $(srctree)/tools/perf/trace/beauty/sync_file_range.sh
@@ -792,7 +793,6 @@
 	$(Q)$(MAKE) -C $(SUBCMD_DIR) O=$(OUTPUT) $(OUTPUT)libsubcmd.a
 
 $(LIBSUBCMD)-clean:
-	$(call QUIET_CLEAN, libsubcmd)
 	$(Q)$(MAKE) -C $(SUBCMD_DIR) O=$(OUTPUT) clean
 
 help:
@@ -832,7 +832,7 @@
 
 # 'make doc' should call 'make -C Documentation all'
 $(DOC_TARGETS):
-	$(QUIET_SUBDIR0)Documentation $(QUIET_SUBDIR1) $(@:doc=all)
+	$(Q)$(MAKE) -C $(DOC_DIR) O=$(OUTPUT) $(@:doc=all)
 
 TAG_FOLDERS= . ../lib ../include
 TAG_FILES= ../../include/uapi/linux/perf_event.h
@@ -959,7 +959,7 @@
 
 # 'make install-doc' should call 'make -C Documentation install'
 $(INSTALL_DOC_TARGETS):
-	$(QUIET_SUBDIR0)Documentation $(QUIET_SUBDIR1) $(@:-doc=)
+	$(Q)$(MAKE) -C $(DOC_DIR) O=$(OUTPUT) $(@:-doc=)
 
 ### Cleaning rules
 
@@ -1008,7 +1008,8 @@
 		$(OUTPUT)$(rename_flags_array) \
 		$(OUTPUT)$(arch_errno_name_array) \
 		$(OUTPUT)$(sync_file_range_arrays)
-	$(QUIET_SUBDIR0)Documentation $(QUIET_SUBDIR1) clean
+	$(call QUIET_CLEAN, Documentation) \
+	$(MAKE) -C $(DOC_DIR) O=$(OUTPUT) clean >/dev/null
 
 #
 # To provide FEATURE-DUMP into $(FEATURE_DUMP_COPY)
diff --git a/tools/perf/arch/arm64/util/Build b/tools/perf/arch/arm64/util/Build
index 0a7782c..5c13438 100644
--- a/tools/perf/arch/arm64/util/Build
+++ b/tools/perf/arch/arm64/util/Build
@@ -1,6 +1,6 @@
 perf-y += header.o
+perf-y += machine.o
 perf-y += perf_regs.o
-perf-y += sym-handling.o
 perf-$(CONFIG_DWARF)     += dwarf-regs.o
 perf-$(CONFIG_LOCAL_LIBUNWIND) += unwind-libunwind.o
 perf-$(CONFIG_LIBDW_DWARF_UNWIND) += unwind-libdw.o
diff --git a/tools/perf/arch/arm64/util/machine.c b/tools/perf/arch/arm64/util/machine.c
new file mode 100644
index 0000000..d41b27e
--- /dev/null
+++ b/tools/perf/arch/arm64/util/machine.c
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <stdio.h>
+#include <string.h>
+#include "debug.h"
+#include "symbol.h"
+
+/* On arm64, kernel text segment start at high memory address,
+ * for example 0xffff 0000 8xxx xxxx. Modules start at a low memory
+ * address, like 0xffff 0000 00ax xxxx. When only samll amount of
+ * memory is used by modules, gap between end of module's text segment
+ * and start of kernel text segment may be reach 2G.
+ * Therefore do not fill this gap and do not assign it to the kernel dso map.
+ */
+
+#define SYMBOL_LIMIT (1 << 12) /* 4K */
+
+void arch__symbols__fixup_end(struct symbol *p, struct symbol *c)
+{
+	if ((strchr(p->name, '[') && strchr(c->name, '[') == NULL) ||
+			(strchr(p->name, '[') == NULL && strchr(c->name, '[')))
+		/* Limit range of last symbol in module and kernel */
+		p->end += SYMBOL_LIMIT;
+	else
+		p->end = c->start;
+	pr_debug4("%s sym:%s end:%#lx\n", __func__, p->name, p->end);
+}
diff --git a/tools/perf/arch/arm64/util/sym-handling.c b/tools/perf/arch/arm64/util/sym-handling.c
deleted file mode 100644
index 8dfa3e5..0000000
--- a/tools/perf/arch/arm64/util/sym-handling.c
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *
- * Copyright (C) 2015 Naveen N. Rao, IBM Corporation
- */
-
-#include "symbol.h" // for the elf__needs_adjust_symbols() prototype
-#include <stdbool.h>
-
-#ifdef HAVE_LIBELF_SUPPORT
-#include <gelf.h>
-
-bool elf__needs_adjust_symbols(GElf_Ehdr ehdr)
-{
-	return ehdr.e_type == ET_EXEC ||
-	       ehdr.e_type == ET_REL ||
-	       ehdr.e_type == ET_DYN;
-}
-#endif
diff --git a/tools/perf/arch/powerpc/util/Build b/tools/perf/arch/powerpc/util/Build
index 7cf0b88..e5c9504 100644
--- a/tools/perf/arch/powerpc/util/Build
+++ b/tools/perf/arch/powerpc/util/Build
@@ -1,5 +1,4 @@
 perf-y += header.o
-perf-y += sym-handling.o
 perf-y += kvm-stat.o
 perf-y += perf_regs.o
 perf-y += mem-events.o
diff --git a/tools/perf/arch/powerpc/util/sym-handling.c b/tools/perf/arch/powerpc/util/sym-handling.c
index abb7a12..0856b32 100644
--- a/tools/perf/arch/powerpc/util/sym-handling.c
+++ b/tools/perf/arch/powerpc/util/sym-handling.c
@@ -10,16 +10,6 @@
 #include "probe-event.h"
 #include "probe-file.h"
 
-#ifdef HAVE_LIBELF_SUPPORT
-bool elf__needs_adjust_symbols(GElf_Ehdr ehdr)
-{
-	return ehdr.e_type == ET_EXEC ||
-	       ehdr.e_type == ET_REL ||
-	       ehdr.e_type == ET_DYN;
-}
-
-#endif
-
 int arch__choose_best_symbol(struct symbol *syma,
 			     struct symbol *symb __maybe_unused)
 {
diff --git a/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl b/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
index 44d510b..37b844f 100644
--- a/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
+++ b/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
@@ -8,357 +8,357 @@
 #
 # The abi is "common", "64" or "x32" for this file.
 #
-0	common	read			__x64_sys_read
-1	common	write			__x64_sys_write
-2	common	open			__x64_sys_open
-3	common	close			__x64_sys_close
-4	common	stat			__x64_sys_newstat
-5	common	fstat			__x64_sys_newfstat
-6	common	lstat			__x64_sys_newlstat
-7	common	poll			__x64_sys_poll
-8	common	lseek			__x64_sys_lseek
-9	common	mmap			__x64_sys_mmap
-10	common	mprotect		__x64_sys_mprotect
-11	common	munmap			__x64_sys_munmap
-12	common	brk			__x64_sys_brk
-13	64	rt_sigaction		__x64_sys_rt_sigaction
-14	common	rt_sigprocmask		__x64_sys_rt_sigprocmask
-15	64	rt_sigreturn		__x64_sys_rt_sigreturn/ptregs
-16	64	ioctl			__x64_sys_ioctl
-17	common	pread64			__x64_sys_pread64
-18	common	pwrite64		__x64_sys_pwrite64
-19	64	readv			__x64_sys_readv
-20	64	writev			__x64_sys_writev
-21	common	access			__x64_sys_access
-22	common	pipe			__x64_sys_pipe
-23	common	select			__x64_sys_select
-24	common	sched_yield		__x64_sys_sched_yield
-25	common	mremap			__x64_sys_mremap
-26	common	msync			__x64_sys_msync
-27	common	mincore			__x64_sys_mincore
-28	common	madvise			__x64_sys_madvise
-29	common	shmget			__x64_sys_shmget
-30	common	shmat			__x64_sys_shmat
-31	common	shmctl			__x64_sys_shmctl
-32	common	dup			__x64_sys_dup
-33	common	dup2			__x64_sys_dup2
-34	common	pause			__x64_sys_pause
-35	common	nanosleep		__x64_sys_nanosleep
-36	common	getitimer		__x64_sys_getitimer
-37	common	alarm			__x64_sys_alarm
-38	common	setitimer		__x64_sys_setitimer
-39	common	getpid			__x64_sys_getpid
-40	common	sendfile		__x64_sys_sendfile64
-41	common	socket			__x64_sys_socket
-42	common	connect			__x64_sys_connect
-43	common	accept			__x64_sys_accept
-44	common	sendto			__x64_sys_sendto
-45	64	recvfrom		__x64_sys_recvfrom
-46	64	sendmsg			__x64_sys_sendmsg
-47	64	recvmsg			__x64_sys_recvmsg
-48	common	shutdown		__x64_sys_shutdown
-49	common	bind			__x64_sys_bind
-50	common	listen			__x64_sys_listen
-51	common	getsockname		__x64_sys_getsockname
-52	common	getpeername		__x64_sys_getpeername
-53	common	socketpair		__x64_sys_socketpair
-54	64	setsockopt		__x64_sys_setsockopt
-55	64	getsockopt		__x64_sys_getsockopt
-56	common	clone			__x64_sys_clone/ptregs
-57	common	fork			__x64_sys_fork/ptregs
-58	common	vfork			__x64_sys_vfork/ptregs
-59	64	execve			__x64_sys_execve/ptregs
-60	common	exit			__x64_sys_exit
-61	common	wait4			__x64_sys_wait4
-62	common	kill			__x64_sys_kill
-63	common	uname			__x64_sys_newuname
-64	common	semget			__x64_sys_semget
-65	common	semop			__x64_sys_semop
-66	common	semctl			__x64_sys_semctl
-67	common	shmdt			__x64_sys_shmdt
-68	common	msgget			__x64_sys_msgget
-69	common	msgsnd			__x64_sys_msgsnd
-70	common	msgrcv			__x64_sys_msgrcv
-71	common	msgctl			__x64_sys_msgctl
-72	common	fcntl			__x64_sys_fcntl
-73	common	flock			__x64_sys_flock
-74	common	fsync			__x64_sys_fsync
-75	common	fdatasync		__x64_sys_fdatasync
-76	common	truncate		__x64_sys_truncate
-77	common	ftruncate		__x64_sys_ftruncate
-78	common	getdents		__x64_sys_getdents
-79	common	getcwd			__x64_sys_getcwd
-80	common	chdir			__x64_sys_chdir
-81	common	fchdir			__x64_sys_fchdir
-82	common	rename			__x64_sys_rename
-83	common	mkdir			__x64_sys_mkdir
-84	common	rmdir			__x64_sys_rmdir
-85	common	creat			__x64_sys_creat
-86	common	link			__x64_sys_link
-87	common	unlink			__x64_sys_unlink
-88	common	symlink			__x64_sys_symlink
-89	common	readlink		__x64_sys_readlink
-90	common	chmod			__x64_sys_chmod
-91	common	fchmod			__x64_sys_fchmod
-92	common	chown			__x64_sys_chown
-93	common	fchown			__x64_sys_fchown
-94	common	lchown			__x64_sys_lchown
-95	common	umask			__x64_sys_umask
-96	common	gettimeofday		__x64_sys_gettimeofday
-97	common	getrlimit		__x64_sys_getrlimit
-98	common	getrusage		__x64_sys_getrusage
-99	common	sysinfo			__x64_sys_sysinfo
-100	common	times			__x64_sys_times
-101	64	ptrace			__x64_sys_ptrace
-102	common	getuid			__x64_sys_getuid
-103	common	syslog			__x64_sys_syslog
-104	common	getgid			__x64_sys_getgid
-105	common	setuid			__x64_sys_setuid
-106	common	setgid			__x64_sys_setgid
-107	common	geteuid			__x64_sys_geteuid
-108	common	getegid			__x64_sys_getegid
-109	common	setpgid			__x64_sys_setpgid
-110	common	getppid			__x64_sys_getppid
-111	common	getpgrp			__x64_sys_getpgrp
-112	common	setsid			__x64_sys_setsid
-113	common	setreuid		__x64_sys_setreuid
-114	common	setregid		__x64_sys_setregid
-115	common	getgroups		__x64_sys_getgroups
-116	common	setgroups		__x64_sys_setgroups
-117	common	setresuid		__x64_sys_setresuid
-118	common	getresuid		__x64_sys_getresuid
-119	common	setresgid		__x64_sys_setresgid
-120	common	getresgid		__x64_sys_getresgid
-121	common	getpgid			__x64_sys_getpgid
-122	common	setfsuid		__x64_sys_setfsuid
-123	common	setfsgid		__x64_sys_setfsgid
-124	common	getsid			__x64_sys_getsid
-125	common	capget			__x64_sys_capget
-126	common	capset			__x64_sys_capset
-127	64	rt_sigpending		__x64_sys_rt_sigpending
-128	64	rt_sigtimedwait		__x64_sys_rt_sigtimedwait
-129	64	rt_sigqueueinfo		__x64_sys_rt_sigqueueinfo
-130	common	rt_sigsuspend		__x64_sys_rt_sigsuspend
-131	64	sigaltstack		__x64_sys_sigaltstack
-132	common	utime			__x64_sys_utime
-133	common	mknod			__x64_sys_mknod
+0	common	read			sys_read
+1	common	write			sys_write
+2	common	open			sys_open
+3	common	close			sys_close
+4	common	stat			sys_newstat
+5	common	fstat			sys_newfstat
+6	common	lstat			sys_newlstat
+7	common	poll			sys_poll
+8	common	lseek			sys_lseek
+9	common	mmap			sys_mmap
+10	common	mprotect		sys_mprotect
+11	common	munmap			sys_munmap
+12	common	brk			sys_brk
+13	64	rt_sigaction		sys_rt_sigaction
+14	common	rt_sigprocmask		sys_rt_sigprocmask
+15	64	rt_sigreturn		sys_rt_sigreturn
+16	64	ioctl			sys_ioctl
+17	common	pread64			sys_pread64
+18	common	pwrite64		sys_pwrite64
+19	64	readv			sys_readv
+20	64	writev			sys_writev
+21	common	access			sys_access
+22	common	pipe			sys_pipe
+23	common	select			sys_select
+24	common	sched_yield		sys_sched_yield
+25	common	mremap			sys_mremap
+26	common	msync			sys_msync
+27	common	mincore			sys_mincore
+28	common	madvise			sys_madvise
+29	common	shmget			sys_shmget
+30	common	shmat			sys_shmat
+31	common	shmctl			sys_shmctl
+32	common	dup			sys_dup
+33	common	dup2			sys_dup2
+34	common	pause			sys_pause
+35	common	nanosleep		sys_nanosleep
+36	common	getitimer		sys_getitimer
+37	common	alarm			sys_alarm
+38	common	setitimer		sys_setitimer
+39	common	getpid			sys_getpid
+40	common	sendfile		sys_sendfile64
+41	common	socket			sys_socket
+42	common	connect			sys_connect
+43	common	accept			sys_accept
+44	common	sendto			sys_sendto
+45	64	recvfrom		sys_recvfrom
+46	64	sendmsg			sys_sendmsg
+47	64	recvmsg			sys_recvmsg
+48	common	shutdown		sys_shutdown
+49	common	bind			sys_bind
+50	common	listen			sys_listen
+51	common	getsockname		sys_getsockname
+52	common	getpeername		sys_getpeername
+53	common	socketpair		sys_socketpair
+54	64	setsockopt		sys_setsockopt
+55	64	getsockopt		sys_getsockopt
+56	common	clone			sys_clone
+57	common	fork			sys_fork
+58	common	vfork			sys_vfork
+59	64	execve			sys_execve
+60	common	exit			sys_exit
+61	common	wait4			sys_wait4
+62	common	kill			sys_kill
+63	common	uname			sys_newuname
+64	common	semget			sys_semget
+65	common	semop			sys_semop
+66	common	semctl			sys_semctl
+67	common	shmdt			sys_shmdt
+68	common	msgget			sys_msgget
+69	common	msgsnd			sys_msgsnd
+70	common	msgrcv			sys_msgrcv
+71	common	msgctl			sys_msgctl
+72	common	fcntl			sys_fcntl
+73	common	flock			sys_flock
+74	common	fsync			sys_fsync
+75	common	fdatasync		sys_fdatasync
+76	common	truncate		sys_truncate
+77	common	ftruncate		sys_ftruncate
+78	common	getdents		sys_getdents
+79	common	getcwd			sys_getcwd
+80	common	chdir			sys_chdir
+81	common	fchdir			sys_fchdir
+82	common	rename			sys_rename
+83	common	mkdir			sys_mkdir
+84	common	rmdir			sys_rmdir
+85	common	creat			sys_creat
+86	common	link			sys_link
+87	common	unlink			sys_unlink
+88	common	symlink			sys_symlink
+89	common	readlink		sys_readlink
+90	common	chmod			sys_chmod
+91	common	fchmod			sys_fchmod
+92	common	chown			sys_chown
+93	common	fchown			sys_fchown
+94	common	lchown			sys_lchown
+95	common	umask			sys_umask
+96	common	gettimeofday		sys_gettimeofday
+97	common	getrlimit		sys_getrlimit
+98	common	getrusage		sys_getrusage
+99	common	sysinfo			sys_sysinfo
+100	common	times			sys_times
+101	64	ptrace			sys_ptrace
+102	common	getuid			sys_getuid
+103	common	syslog			sys_syslog
+104	common	getgid			sys_getgid
+105	common	setuid			sys_setuid
+106	common	setgid			sys_setgid
+107	common	geteuid			sys_geteuid
+108	common	getegid			sys_getegid
+109	common	setpgid			sys_setpgid
+110	common	getppid			sys_getppid
+111	common	getpgrp			sys_getpgrp
+112	common	setsid			sys_setsid
+113	common	setreuid		sys_setreuid
+114	common	setregid		sys_setregid
+115	common	getgroups		sys_getgroups
+116	common	setgroups		sys_setgroups
+117	common	setresuid		sys_setresuid
+118	common	getresuid		sys_getresuid
+119	common	setresgid		sys_setresgid
+120	common	getresgid		sys_getresgid
+121	common	getpgid			sys_getpgid
+122	common	setfsuid		sys_setfsuid
+123	common	setfsgid		sys_setfsgid
+124	common	getsid			sys_getsid
+125	common	capget			sys_capget
+126	common	capset			sys_capset
+127	64	rt_sigpending		sys_rt_sigpending
+128	64	rt_sigtimedwait		sys_rt_sigtimedwait
+129	64	rt_sigqueueinfo		sys_rt_sigqueueinfo
+130	common	rt_sigsuspend		sys_rt_sigsuspend
+131	64	sigaltstack		sys_sigaltstack
+132	common	utime			sys_utime
+133	common	mknod			sys_mknod
 134	64	uselib
-135	common	personality		__x64_sys_personality
-136	common	ustat			__x64_sys_ustat
-137	common	statfs			__x64_sys_statfs
-138	common	fstatfs			__x64_sys_fstatfs
-139	common	sysfs			__x64_sys_sysfs
-140	common	getpriority		__x64_sys_getpriority
-141	common	setpriority		__x64_sys_setpriority
-142	common	sched_setparam		__x64_sys_sched_setparam
-143	common	sched_getparam		__x64_sys_sched_getparam
-144	common	sched_setscheduler	__x64_sys_sched_setscheduler
-145	common	sched_getscheduler	__x64_sys_sched_getscheduler
-146	common	sched_get_priority_max	__x64_sys_sched_get_priority_max
-147	common	sched_get_priority_min	__x64_sys_sched_get_priority_min
-148	common	sched_rr_get_interval	__x64_sys_sched_rr_get_interval
-149	common	mlock			__x64_sys_mlock
-150	common	munlock			__x64_sys_munlock
-151	common	mlockall		__x64_sys_mlockall
-152	common	munlockall		__x64_sys_munlockall
-153	common	vhangup			__x64_sys_vhangup
-154	common	modify_ldt		__x64_sys_modify_ldt
-155	common	pivot_root		__x64_sys_pivot_root
-156	64	_sysctl			__x64_sys_sysctl
-157	common	prctl			__x64_sys_prctl
-158	common	arch_prctl		__x64_sys_arch_prctl
-159	common	adjtimex		__x64_sys_adjtimex
-160	common	setrlimit		__x64_sys_setrlimit
-161	common	chroot			__x64_sys_chroot
-162	common	sync			__x64_sys_sync
-163	common	acct			__x64_sys_acct
-164	common	settimeofday		__x64_sys_settimeofday
-165	common	mount			__x64_sys_mount
-166	common	umount2			__x64_sys_umount
-167	common	swapon			__x64_sys_swapon
-168	common	swapoff			__x64_sys_swapoff
-169	common	reboot			__x64_sys_reboot
-170	common	sethostname		__x64_sys_sethostname
-171	common	setdomainname		__x64_sys_setdomainname
-172	common	iopl			__x64_sys_iopl/ptregs
-173	common	ioperm			__x64_sys_ioperm
+135	common	personality		sys_personality
+136	common	ustat			sys_ustat
+137	common	statfs			sys_statfs
+138	common	fstatfs			sys_fstatfs
+139	common	sysfs			sys_sysfs
+140	common	getpriority		sys_getpriority
+141	common	setpriority		sys_setpriority
+142	common	sched_setparam		sys_sched_setparam
+143	common	sched_getparam		sys_sched_getparam
+144	common	sched_setscheduler	sys_sched_setscheduler
+145	common	sched_getscheduler	sys_sched_getscheduler
+146	common	sched_get_priority_max	sys_sched_get_priority_max
+147	common	sched_get_priority_min	sys_sched_get_priority_min
+148	common	sched_rr_get_interval	sys_sched_rr_get_interval
+149	common	mlock			sys_mlock
+150	common	munlock			sys_munlock
+151	common	mlockall		sys_mlockall
+152	common	munlockall		sys_munlockall
+153	common	vhangup			sys_vhangup
+154	common	modify_ldt		sys_modify_ldt
+155	common	pivot_root		sys_pivot_root
+156	64	_sysctl			sys_sysctl
+157	common	prctl			sys_prctl
+158	common	arch_prctl		sys_arch_prctl
+159	common	adjtimex		sys_adjtimex
+160	common	setrlimit		sys_setrlimit
+161	common	chroot			sys_chroot
+162	common	sync			sys_sync
+163	common	acct			sys_acct
+164	common	settimeofday		sys_settimeofday
+165	common	mount			sys_mount
+166	common	umount2			sys_umount
+167	common	swapon			sys_swapon
+168	common	swapoff			sys_swapoff
+169	common	reboot			sys_reboot
+170	common	sethostname		sys_sethostname
+171	common	setdomainname		sys_setdomainname
+172	common	iopl			sys_iopl
+173	common	ioperm			sys_ioperm
 174	64	create_module
-175	common	init_module		__x64_sys_init_module
-176	common	delete_module		__x64_sys_delete_module
+175	common	init_module		sys_init_module
+176	common	delete_module		sys_delete_module
 177	64	get_kernel_syms
 178	64	query_module
-179	common	quotactl		__x64_sys_quotactl
+179	common	quotactl		sys_quotactl
 180	64	nfsservctl
 181	common	getpmsg
 182	common	putpmsg
 183	common	afs_syscall
 184	common	tuxcall
 185	common	security
-186	common	gettid			__x64_sys_gettid
-187	common	readahead		__x64_sys_readahead
-188	common	setxattr		__x64_sys_setxattr
-189	common	lsetxattr		__x64_sys_lsetxattr
-190	common	fsetxattr		__x64_sys_fsetxattr
-191	common	getxattr		__x64_sys_getxattr
-192	common	lgetxattr		__x64_sys_lgetxattr
-193	common	fgetxattr		__x64_sys_fgetxattr
-194	common	listxattr		__x64_sys_listxattr
-195	common	llistxattr		__x64_sys_llistxattr
-196	common	flistxattr		__x64_sys_flistxattr
-197	common	removexattr		__x64_sys_removexattr
-198	common	lremovexattr		__x64_sys_lremovexattr
-199	common	fremovexattr		__x64_sys_fremovexattr
-200	common	tkill			__x64_sys_tkill
-201	common	time			__x64_sys_time
-202	common	futex			__x64_sys_futex
-203	common	sched_setaffinity	__x64_sys_sched_setaffinity
-204	common	sched_getaffinity	__x64_sys_sched_getaffinity
+186	common	gettid			sys_gettid
+187	common	readahead		sys_readahead
+188	common	setxattr		sys_setxattr
+189	common	lsetxattr		sys_lsetxattr
+190	common	fsetxattr		sys_fsetxattr
+191	common	getxattr		sys_getxattr
+192	common	lgetxattr		sys_lgetxattr
+193	common	fgetxattr		sys_fgetxattr
+194	common	listxattr		sys_listxattr
+195	common	llistxattr		sys_llistxattr
+196	common	flistxattr		sys_flistxattr
+197	common	removexattr		sys_removexattr
+198	common	lremovexattr		sys_lremovexattr
+199	common	fremovexattr		sys_fremovexattr
+200	common	tkill			sys_tkill
+201	common	time			sys_time
+202	common	futex			sys_futex
+203	common	sched_setaffinity	sys_sched_setaffinity
+204	common	sched_getaffinity	sys_sched_getaffinity
 205	64	set_thread_area
-206	64	io_setup		__x64_sys_io_setup
-207	common	io_destroy		__x64_sys_io_destroy
-208	common	io_getevents		__x64_sys_io_getevents
-209	64	io_submit		__x64_sys_io_submit
-210	common	io_cancel		__x64_sys_io_cancel
+206	64	io_setup		sys_io_setup
+207	common	io_destroy		sys_io_destroy
+208	common	io_getevents		sys_io_getevents
+209	64	io_submit		sys_io_submit
+210	common	io_cancel		sys_io_cancel
 211	64	get_thread_area
-212	common	lookup_dcookie		__x64_sys_lookup_dcookie
-213	common	epoll_create		__x64_sys_epoll_create
+212	common	lookup_dcookie		sys_lookup_dcookie
+213	common	epoll_create		sys_epoll_create
 214	64	epoll_ctl_old
 215	64	epoll_wait_old
-216	common	remap_file_pages	__x64_sys_remap_file_pages
-217	common	getdents64		__x64_sys_getdents64
-218	common	set_tid_address		__x64_sys_set_tid_address
-219	common	restart_syscall		__x64_sys_restart_syscall
-220	common	semtimedop		__x64_sys_semtimedop
-221	common	fadvise64		__x64_sys_fadvise64
-222	64	timer_create		__x64_sys_timer_create
-223	common	timer_settime		__x64_sys_timer_settime
-224	common	timer_gettime		__x64_sys_timer_gettime
-225	common	timer_getoverrun	__x64_sys_timer_getoverrun
-226	common	timer_delete		__x64_sys_timer_delete
-227	common	clock_settime		__x64_sys_clock_settime
-228	common	clock_gettime		__x64_sys_clock_gettime
-229	common	clock_getres		__x64_sys_clock_getres
-230	common	clock_nanosleep		__x64_sys_clock_nanosleep
-231	common	exit_group		__x64_sys_exit_group
-232	common	epoll_wait		__x64_sys_epoll_wait
-233	common	epoll_ctl		__x64_sys_epoll_ctl
-234	common	tgkill			__x64_sys_tgkill
-235	common	utimes			__x64_sys_utimes
+216	common	remap_file_pages	sys_remap_file_pages
+217	common	getdents64		sys_getdents64
+218	common	set_tid_address		sys_set_tid_address
+219	common	restart_syscall		sys_restart_syscall
+220	common	semtimedop		sys_semtimedop
+221	common	fadvise64		sys_fadvise64
+222	64	timer_create		sys_timer_create
+223	common	timer_settime		sys_timer_settime
+224	common	timer_gettime		sys_timer_gettime
+225	common	timer_getoverrun	sys_timer_getoverrun
+226	common	timer_delete		sys_timer_delete
+227	common	clock_settime		sys_clock_settime
+228	common	clock_gettime		sys_clock_gettime
+229	common	clock_getres		sys_clock_getres
+230	common	clock_nanosleep		sys_clock_nanosleep
+231	common	exit_group		sys_exit_group
+232	common	epoll_wait		sys_epoll_wait
+233	common	epoll_ctl		sys_epoll_ctl
+234	common	tgkill			sys_tgkill
+235	common	utimes			sys_utimes
 236	64	vserver
-237	common	mbind			__x64_sys_mbind
-238	common	set_mempolicy		__x64_sys_set_mempolicy
-239	common	get_mempolicy		__x64_sys_get_mempolicy
-240	common	mq_open			__x64_sys_mq_open
-241	common	mq_unlink		__x64_sys_mq_unlink
-242	common	mq_timedsend		__x64_sys_mq_timedsend
-243	common	mq_timedreceive		__x64_sys_mq_timedreceive
-244	64	mq_notify		__x64_sys_mq_notify
-245	common	mq_getsetattr		__x64_sys_mq_getsetattr
-246	64	kexec_load		__x64_sys_kexec_load
-247	64	waitid			__x64_sys_waitid
-248	common	add_key			__x64_sys_add_key
-249	common	request_key		__x64_sys_request_key
-250	common	keyctl			__x64_sys_keyctl
-251	common	ioprio_set		__x64_sys_ioprio_set
-252	common	ioprio_get		__x64_sys_ioprio_get
-253	common	inotify_init		__x64_sys_inotify_init
-254	common	inotify_add_watch	__x64_sys_inotify_add_watch
-255	common	inotify_rm_watch	__x64_sys_inotify_rm_watch
-256	common	migrate_pages		__x64_sys_migrate_pages
-257	common	openat			__x64_sys_openat
-258	common	mkdirat			__x64_sys_mkdirat
-259	common	mknodat			__x64_sys_mknodat
-260	common	fchownat		__x64_sys_fchownat
-261	common	futimesat		__x64_sys_futimesat
-262	common	newfstatat		__x64_sys_newfstatat
-263	common	unlinkat		__x64_sys_unlinkat
-264	common	renameat		__x64_sys_renameat
-265	common	linkat			__x64_sys_linkat
-266	common	symlinkat		__x64_sys_symlinkat
-267	common	readlinkat		__x64_sys_readlinkat
-268	common	fchmodat		__x64_sys_fchmodat
-269	common	faccessat		__x64_sys_faccessat
-270	common	pselect6		__x64_sys_pselect6
-271	common	ppoll			__x64_sys_ppoll
-272	common	unshare			__x64_sys_unshare
-273	64	set_robust_list		__x64_sys_set_robust_list
-274	64	get_robust_list		__x64_sys_get_robust_list
-275	common	splice			__x64_sys_splice
-276	common	tee			__x64_sys_tee
-277	common	sync_file_range		__x64_sys_sync_file_range
-278	64	vmsplice		__x64_sys_vmsplice
-279	64	move_pages		__x64_sys_move_pages
-280	common	utimensat		__x64_sys_utimensat
-281	common	epoll_pwait		__x64_sys_epoll_pwait
-282	common	signalfd		__x64_sys_signalfd
-283	common	timerfd_create		__x64_sys_timerfd_create
-284	common	eventfd			__x64_sys_eventfd
-285	common	fallocate		__x64_sys_fallocate
-286	common	timerfd_settime		__x64_sys_timerfd_settime
-287	common	timerfd_gettime		__x64_sys_timerfd_gettime
-288	common	accept4			__x64_sys_accept4
-289	common	signalfd4		__x64_sys_signalfd4
-290	common	eventfd2		__x64_sys_eventfd2
-291	common	epoll_create1		__x64_sys_epoll_create1
-292	common	dup3			__x64_sys_dup3
-293	common	pipe2			__x64_sys_pipe2
-294	common	inotify_init1		__x64_sys_inotify_init1
-295	64	preadv			__x64_sys_preadv
-296	64	pwritev			__x64_sys_pwritev
-297	64	rt_tgsigqueueinfo	__x64_sys_rt_tgsigqueueinfo
-298	common	perf_event_open		__x64_sys_perf_event_open
-299	64	recvmmsg		__x64_sys_recvmmsg
-300	common	fanotify_init		__x64_sys_fanotify_init
-301	common	fanotify_mark		__x64_sys_fanotify_mark
-302	common	prlimit64		__x64_sys_prlimit64
-303	common	name_to_handle_at	__x64_sys_name_to_handle_at
-304	common	open_by_handle_at	__x64_sys_open_by_handle_at
-305	common	clock_adjtime		__x64_sys_clock_adjtime
-306	common	syncfs			__x64_sys_syncfs
-307	64	sendmmsg		__x64_sys_sendmmsg
-308	common	setns			__x64_sys_setns
-309	common	getcpu			__x64_sys_getcpu
-310	64	process_vm_readv	__x64_sys_process_vm_readv
-311	64	process_vm_writev	__x64_sys_process_vm_writev
-312	common	kcmp			__x64_sys_kcmp
-313	common	finit_module		__x64_sys_finit_module
-314	common	sched_setattr		__x64_sys_sched_setattr
-315	common	sched_getattr		__x64_sys_sched_getattr
-316	common	renameat2		__x64_sys_renameat2
-317	common	seccomp			__x64_sys_seccomp
-318	common	getrandom		__x64_sys_getrandom
-319	common	memfd_create		__x64_sys_memfd_create
-320	common	kexec_file_load		__x64_sys_kexec_file_load
-321	common	bpf			__x64_sys_bpf
-322	64	execveat		__x64_sys_execveat/ptregs
-323	common	userfaultfd		__x64_sys_userfaultfd
-324	common	membarrier		__x64_sys_membarrier
-325	common	mlock2			__x64_sys_mlock2
-326	common	copy_file_range		__x64_sys_copy_file_range
-327	64	preadv2			__x64_sys_preadv2
-328	64	pwritev2		__x64_sys_pwritev2
-329	common	pkey_mprotect		__x64_sys_pkey_mprotect
-330	common	pkey_alloc		__x64_sys_pkey_alloc
-331	common	pkey_free		__x64_sys_pkey_free
-332	common	statx			__x64_sys_statx
-333	common	io_pgetevents		__x64_sys_io_pgetevents
-334	common	rseq			__x64_sys_rseq
+237	common	mbind			sys_mbind
+238	common	set_mempolicy		sys_set_mempolicy
+239	common	get_mempolicy		sys_get_mempolicy
+240	common	mq_open			sys_mq_open
+241	common	mq_unlink		sys_mq_unlink
+242	common	mq_timedsend		sys_mq_timedsend
+243	common	mq_timedreceive		sys_mq_timedreceive
+244	64	mq_notify		sys_mq_notify
+245	common	mq_getsetattr		sys_mq_getsetattr
+246	64	kexec_load		sys_kexec_load
+247	64	waitid			sys_waitid
+248	common	add_key			sys_add_key
+249	common	request_key		sys_request_key
+250	common	keyctl			sys_keyctl
+251	common	ioprio_set		sys_ioprio_set
+252	common	ioprio_get		sys_ioprio_get
+253	common	inotify_init		sys_inotify_init
+254	common	inotify_add_watch	sys_inotify_add_watch
+255	common	inotify_rm_watch	sys_inotify_rm_watch
+256	common	migrate_pages		sys_migrate_pages
+257	common	openat			sys_openat
+258	common	mkdirat			sys_mkdirat
+259	common	mknodat			sys_mknodat
+260	common	fchownat		sys_fchownat
+261	common	futimesat		sys_futimesat
+262	common	newfstatat		sys_newfstatat
+263	common	unlinkat		sys_unlinkat
+264	common	renameat		sys_renameat
+265	common	linkat			sys_linkat
+266	common	symlinkat		sys_symlinkat
+267	common	readlinkat		sys_readlinkat
+268	common	fchmodat		sys_fchmodat
+269	common	faccessat		sys_faccessat
+270	common	pselect6		sys_pselect6
+271	common	ppoll			sys_ppoll
+272	common	unshare			sys_unshare
+273	64	set_robust_list		sys_set_robust_list
+274	64	get_robust_list		sys_get_robust_list
+275	common	splice			sys_splice
+276	common	tee			sys_tee
+277	common	sync_file_range		sys_sync_file_range
+278	64	vmsplice		sys_vmsplice
+279	64	move_pages		sys_move_pages
+280	common	utimensat		sys_utimensat
+281	common	epoll_pwait		sys_epoll_pwait
+282	common	signalfd		sys_signalfd
+283	common	timerfd_create		sys_timerfd_create
+284	common	eventfd			sys_eventfd
+285	common	fallocate		sys_fallocate
+286	common	timerfd_settime		sys_timerfd_settime
+287	common	timerfd_gettime		sys_timerfd_gettime
+288	common	accept4			sys_accept4
+289	common	signalfd4		sys_signalfd4
+290	common	eventfd2		sys_eventfd2
+291	common	epoll_create1		sys_epoll_create1
+292	common	dup3			sys_dup3
+293	common	pipe2			sys_pipe2
+294	common	inotify_init1		sys_inotify_init1
+295	64	preadv			sys_preadv
+296	64	pwritev			sys_pwritev
+297	64	rt_tgsigqueueinfo	sys_rt_tgsigqueueinfo
+298	common	perf_event_open		sys_perf_event_open
+299	64	recvmmsg		sys_recvmmsg
+300	common	fanotify_init		sys_fanotify_init
+301	common	fanotify_mark		sys_fanotify_mark
+302	common	prlimit64		sys_prlimit64
+303	common	name_to_handle_at	sys_name_to_handle_at
+304	common	open_by_handle_at	sys_open_by_handle_at
+305	common	clock_adjtime		sys_clock_adjtime
+306	common	syncfs			sys_syncfs
+307	64	sendmmsg		sys_sendmmsg
+308	common	setns			sys_setns
+309	common	getcpu			sys_getcpu
+310	64	process_vm_readv	sys_process_vm_readv
+311	64	process_vm_writev	sys_process_vm_writev
+312	common	kcmp			sys_kcmp
+313	common	finit_module		sys_finit_module
+314	common	sched_setattr		sys_sched_setattr
+315	common	sched_getattr		sys_sched_getattr
+316	common	renameat2		sys_renameat2
+317	common	seccomp			sys_seccomp
+318	common	getrandom		sys_getrandom
+319	common	memfd_create		sys_memfd_create
+320	common	kexec_file_load		sys_kexec_file_load
+321	common	bpf			sys_bpf
+322	64	execveat		sys_execveat
+323	common	userfaultfd		sys_userfaultfd
+324	common	membarrier		sys_membarrier
+325	common	mlock2			sys_mlock2
+326	common	copy_file_range		sys_copy_file_range
+327	64	preadv2			sys_preadv2
+328	64	pwritev2		sys_pwritev2
+329	common	pkey_mprotect		sys_pkey_mprotect
+330	common	pkey_alloc		sys_pkey_alloc
+331	common	pkey_free		sys_pkey_free
+332	common	statx			sys_statx
+333	common	io_pgetevents		sys_io_pgetevents
+334	common	rseq			sys_rseq
 # don't use numbers 387 through 423, add new calls after the last
 # 'common' entry
-424	common	pidfd_send_signal	__x64_sys_pidfd_send_signal
-425	common	io_uring_setup		__x64_sys_io_uring_setup
-426	common	io_uring_enter		__x64_sys_io_uring_enter
-427	common	io_uring_register	__x64_sys_io_uring_register
-428	common	open_tree		__x64_sys_open_tree
-429	common	move_mount		__x64_sys_move_mount
-430	common	fsopen			__x64_sys_fsopen
-431	common	fsconfig		__x64_sys_fsconfig
-432	common	fsmount			__x64_sys_fsmount
-433	common	fspick			__x64_sys_fspick
-434	common	pidfd_open		__x64_sys_pidfd_open
-435	common	clone3			__x64_sys_clone3/ptregs
-437	common	openat2			__x64_sys_openat2
-438	common	pidfd_getfd		__x64_sys_pidfd_getfd
+424	common	pidfd_send_signal	sys_pidfd_send_signal
+425	common	io_uring_setup		sys_io_uring_setup
+426	common	io_uring_enter		sys_io_uring_enter
+427	common	io_uring_register	sys_io_uring_register
+428	common	open_tree		sys_open_tree
+429	common	move_mount		sys_move_mount
+430	common	fsopen			sys_fsopen
+431	common	fsconfig		sys_fsconfig
+432	common	fsmount			sys_fsmount
+433	common	fspick			sys_fspick
+434	common	pidfd_open		sys_pidfd_open
+435	common	clone3			sys_clone3
+437	common	openat2			sys_openat2
+438	common	pidfd_getfd		sys_pidfd_getfd
 
 #
 # x32-specific system call numbers start at 512 to avoid cache impact
@@ -366,39 +366,39 @@
 # on-the-fly for compat_sys_*() compatibility system calls if X86_X32
 # is defined.
 #
-512	x32	rt_sigaction		__x32_compat_sys_rt_sigaction
-513	x32	rt_sigreturn		sys32_x32_rt_sigreturn
-514	x32	ioctl			__x32_compat_sys_ioctl
-515	x32	readv			__x32_compat_sys_readv
-516	x32	writev			__x32_compat_sys_writev
-517	x32	recvfrom		__x32_compat_sys_recvfrom
-518	x32	sendmsg			__x32_compat_sys_sendmsg
-519	x32	recvmsg			__x32_compat_sys_recvmsg
-520	x32	execve			__x32_compat_sys_execve/ptregs
-521	x32	ptrace			__x32_compat_sys_ptrace
-522	x32	rt_sigpending		__x32_compat_sys_rt_sigpending
-523	x32	rt_sigtimedwait		__x32_compat_sys_rt_sigtimedwait_time64
-524	x32	rt_sigqueueinfo		__x32_compat_sys_rt_sigqueueinfo
-525	x32	sigaltstack		__x32_compat_sys_sigaltstack
-526	x32	timer_create		__x32_compat_sys_timer_create
-527	x32	mq_notify		__x32_compat_sys_mq_notify
-528	x32	kexec_load		__x32_compat_sys_kexec_load
-529	x32	waitid			__x32_compat_sys_waitid
-530	x32	set_robust_list		__x32_compat_sys_set_robust_list
-531	x32	get_robust_list		__x32_compat_sys_get_robust_list
-532	x32	vmsplice		__x32_compat_sys_vmsplice
-533	x32	move_pages		__x32_compat_sys_move_pages
-534	x32	preadv			__x32_compat_sys_preadv64
-535	x32	pwritev			__x32_compat_sys_pwritev64
-536	x32	rt_tgsigqueueinfo	__x32_compat_sys_rt_tgsigqueueinfo
-537	x32	recvmmsg		__x32_compat_sys_recvmmsg_time64
-538	x32	sendmmsg		__x32_compat_sys_sendmmsg
-539	x32	process_vm_readv	__x32_compat_sys_process_vm_readv
-540	x32	process_vm_writev	__x32_compat_sys_process_vm_writev
-541	x32	setsockopt		__x32_compat_sys_setsockopt
-542	x32	getsockopt		__x32_compat_sys_getsockopt
-543	x32	io_setup		__x32_compat_sys_io_setup
-544	x32	io_submit		__x32_compat_sys_io_submit
-545	x32	execveat		__x32_compat_sys_execveat/ptregs
-546	x32	preadv2			__x32_compat_sys_preadv64v2
-547	x32	pwritev2		__x32_compat_sys_pwritev64v2
+512	x32	rt_sigaction		compat_sys_rt_sigaction
+513	x32	rt_sigreturn		compat_sys_x32_rt_sigreturn
+514	x32	ioctl			compat_sys_ioctl
+515	x32	readv			compat_sys_readv
+516	x32	writev			compat_sys_writev
+517	x32	recvfrom		compat_sys_recvfrom
+518	x32	sendmsg			compat_sys_sendmsg
+519	x32	recvmsg			compat_sys_recvmsg
+520	x32	execve			compat_sys_execve
+521	x32	ptrace			compat_sys_ptrace
+522	x32	rt_sigpending		compat_sys_rt_sigpending
+523	x32	rt_sigtimedwait		compat_sys_rt_sigtimedwait_time64
+524	x32	rt_sigqueueinfo		compat_sys_rt_sigqueueinfo
+525	x32	sigaltstack		compat_sys_sigaltstack
+526	x32	timer_create		compat_sys_timer_create
+527	x32	mq_notify		compat_sys_mq_notify
+528	x32	kexec_load		compat_sys_kexec_load
+529	x32	waitid			compat_sys_waitid
+530	x32	set_robust_list		compat_sys_set_robust_list
+531	x32	get_robust_list		compat_sys_get_robust_list
+532	x32	vmsplice		compat_sys_vmsplice
+533	x32	move_pages		compat_sys_move_pages
+534	x32	preadv			compat_sys_preadv64
+535	x32	pwritev			compat_sys_pwritev64
+536	x32	rt_tgsigqueueinfo	compat_sys_rt_tgsigqueueinfo
+537	x32	recvmmsg		compat_sys_recvmmsg_time64
+538	x32	sendmmsg		compat_sys_sendmmsg
+539	x32	process_vm_readv	compat_sys_process_vm_readv
+540	x32	process_vm_writev	compat_sys_process_vm_writev
+541	x32	setsockopt		compat_sys_setsockopt
+542	x32	getsockopt		compat_sys_getsockopt
+543	x32	io_setup		compat_sys_io_setup
+544	x32	io_submit		compat_sys_io_submit
+545	x32	execveat		compat_sys_execveat
+546	x32	preadv2			compat_sys_preadv64v2
+547	x32	pwritev2		compat_sys_pwritev64v2
diff --git a/tools/perf/builtin-diff.c b/tools/perf/builtin-diff.c
index 5e697cd..c94a002 100644
--- a/tools/perf/builtin-diff.c
+++ b/tools/perf/builtin-diff.c
@@ -455,6 +455,7 @@ static struct perf_diff pdiff = {
 		.fork	= perf_event__process_fork,
 		.lost	= perf_event__process_lost,
 		.namespaces = perf_event__process_namespaces,
+		.cgroup = perf_event__process_cgroup,
 		.ordered_events = true,
 		.ordering_requires_timestamps = true,
 	},
diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index 4c30146..1ab349a 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -1397,6 +1397,11 @@ static int record__synthesize(struct record *rec, bool tail)
 	if (err < 0)
 		pr_warning("Couldn't synthesize bpf events.\n");
 
+	err = perf_event__synthesize_cgroups(tool, process_synthesized_event,
+					     machine);
+	if (err < 0)
+		pr_warning("Couldn't synthesize cgroup events.\n");
+
 	err = __machine__synthesize_threads(machine, tool, &opts->target, rec->evlist->core.threads,
 					    process_synthesized_event, opts->sample_address,
 					    1);
@@ -1428,6 +1433,15 @@ static int __cmd_record(struct record *rec, int argc, const char **argv)
 	if (rec->opts.record_namespaces)
 		tool->namespace_events = true;
 
+	if (rec->opts.record_cgroup) {
+#ifdef HAVE_FILE_HANDLE
+		tool->cgroup_events = true;
+#else
+		pr_err("cgroup tracking is not supported\n");
+		return -1;
+#endif
+	}
+
 	if (rec->opts.auxtrace_snapshot_mode || rec->switch_output.enabled) {
 		signal(SIGUSR2, snapshot_sig_handler);
 		if (rec->opts.auxtrace_snapshot_mode)
@@ -2358,6 +2372,8 @@ static struct option __record_options[] = {
 			"per thread proc mmap processing timeout in ms"),
 	OPT_BOOLEAN(0, "namespaces", &record.opts.record_namespaces,
 		    "Record namespaces events"),
+	OPT_BOOLEAN(0, "all-cgroups", &record.opts.record_cgroup,
+		    "Record cgroup events"),
 	OPT_BOOLEAN(0, "switch-events", &record.opts.record_switch_events,
 		    "Record context switch events"),
 	OPT_BOOLEAN_FLAG(0, "all-kernel", &record.opts.all_kernel,
diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c
index 5f4045d..26d8fc2 100644
--- a/tools/perf/builtin-report.c
+++ b/tools/perf/builtin-report.c
@@ -635,7 +635,7 @@ static int report__browse_hists(struct report *rep)
 		 * Usually "ret" is the last pressed key, and we only
 		 * care if the key notifies us to switch data file.
 		 */
-		if (ret != K_SWITCH_INPUT_DATA)
+		if (ret != K_SWITCH_INPUT_DATA && ret != K_RELOAD)
 			ret = 0;
 		break;
 	case 2:
@@ -1105,6 +1105,7 @@ int cmd_report(int argc, const char **argv)
 			.mmap2		 = perf_event__process_mmap2,
 			.comm		 = perf_event__process_comm,
 			.namespaces	 = perf_event__process_namespaces,
+			.cgroup		 = perf_event__process_cgroup,
 			.exit		 = perf_event__process_exit,
 			.fork		 = perf_event__process_fork,
 			.lost		 = perf_event__process_lost,
@@ -1227,6 +1228,10 @@ int cmd_report(int argc, const char **argv)
 		    "Show a column with the sum of periods"),
 	OPT_BOOLEAN_SET(0, "group", &symbol_conf.event_group, &report.group_set,
 		    "Show event group information together"),
+	OPT_INTEGER(0, "group-sort-idx", &symbol_conf.group_sort_idx,
+		    "Sort the output by the event at the index n in group. "
+		    "If n is invalid, sort by the first event. "
+		    "WARNING: should be used on grouped events."),
 	OPT_CALLBACK_NOOPT('b', "branch-stack", &branch_mode, "",
 		    "use branch records for per branch histogram filling",
 		    parse_branch_mode),
@@ -1369,6 +1374,12 @@ int cmd_report(int argc, const char **argv)
 
 	setup_forced_leader(&report, session->evlist);
 
+	if (symbol_conf.group_sort_idx && !session->evlist->nr_groups) {
+		parse_options_usage(NULL, options, "group-sort-idx", 0);
+		ret = -EINVAL;
+		goto error;
+	}
+
 	if (itrace_synth_opts.last_branch)
 		has_br_stack = true;
 
@@ -1470,7 +1481,7 @@ int cmd_report(int argc, const char **argv)
 		sort_order = sort_tmp;
 	}
 
-	if ((last_key != K_SWITCH_INPUT_DATA) &&
+	if ((last_key != K_SWITCH_INPUT_DATA && last_key != K_RELOAD) &&
 	    (setup_sorting(session->evlist) < 0)) {
 		if (sort_order)
 			parse_options_usage(report_usage, options, "s", 1);
@@ -1549,7 +1560,7 @@ int cmd_report(int argc, const char **argv)
 	sort__setup_elide(stdout);
 
 	ret = __cmd_report(&report);
-	if (ret == K_SWITCH_INPUT_DATA) {
+	if (ret == K_SWITCH_INPUT_DATA || ret == K_RELOAD) {
 		perf_session__delete(session);
 		last_key = K_SWITCH_INPUT_DATA;
 		goto repeat;
diff --git a/tools/perf/builtin-script.c b/tools/perf/builtin-script.c
index 656b347..1f57a7e 100644
--- a/tools/perf/builtin-script.c
+++ b/tools/perf/builtin-script.c
@@ -63,7 +63,9 @@
 static char const		*script_name;
 static char const		*generate_script_lang;
 static bool			reltime;
+static bool			deltatime;
 static u64			initial_time;
+static u64			previous_time;
 static bool			debug_mode;
 static u64			last_timestamp;
 static u64			nr_unordered;
@@ -704,6 +706,13 @@ static int perf_sample__fprintf_start(struct perf_sample *sample,
 			if (!initial_time)
 				initial_time = sample->time;
 			t = sample->time - initial_time;
+		} else if (deltatime) {
+			if (previous_time)
+				t = sample->time - previous_time;
+			else {
+				t = 0;
+			}
+			previous_time = sample->time;
 		}
 		nsecs = t;
 		secs = nsecs / NSEC_PER_SEC;
@@ -1685,6 +1694,7 @@ struct perf_script {
 	bool			show_lost_events;
 	bool			show_round_events;
 	bool			show_bpf_events;
+	bool			show_cgroup_events;
 	bool			allocated;
 	bool			per_event_dump;
 	struct evswitch		evswitch;
@@ -2203,6 +2213,41 @@ static int process_namespaces_event(struct perf_tool *tool,
 	return ret;
 }
 
+static int process_cgroup_event(struct perf_tool *tool,
+				union perf_event *event,
+				struct perf_sample *sample,
+				struct machine *machine)
+{
+	struct thread *thread;
+	struct perf_script *script = container_of(tool, struct perf_script, tool);
+	struct perf_session *session = script->session;
+	struct evsel *evsel = perf_evlist__id2evsel(session->evlist, sample->id);
+	int ret = -1;
+
+	thread = machine__findnew_thread(machine, sample->pid, sample->tid);
+	if (thread == NULL) {
+		pr_debug("problem processing CGROUP event, skipping it.\n");
+		return -1;
+	}
+
+	if (perf_event__process_cgroup(tool, event, sample, machine) < 0)
+		goto out;
+
+	if (!evsel->core.attr.sample_id_all) {
+		sample->cpu = 0;
+		sample->time = 0;
+	}
+	if (!filter_cpu(sample)) {
+		perf_sample__fprintf_start(sample, thread, evsel,
+					   PERF_RECORD_CGROUP, stdout);
+		perf_event__fprintf(event, stdout);
+	}
+	ret = 0;
+out:
+	thread__put(thread);
+	return ret;
+}
+
 static int process_fork_event(struct perf_tool *tool,
 			      union perf_event *event,
 			      struct perf_sample *sample,
@@ -2542,6 +2587,8 @@ static int __cmd_script(struct perf_script *script)
 		script->tool.context_switch = process_switch_event;
 	if (script->show_namespace_events)
 		script->tool.namespaces = process_namespaces_event;
+	if (script->show_cgroup_events)
+		script->tool.cgroup = process_cgroup_event;
 	if (script->show_lost_events)
 		script->tool.lost = process_lost_event;
 	if (script->show_round_events) {
@@ -3218,10 +3265,10 @@ static char *get_script_path(const char *script_root, const char *suffix)
 			__script_root = get_script_root(script_dirent, suffix);
 			if (__script_root && !strcmp(script_root, __script_root)) {
 				free(__script_root);
-				closedir(lang_dir);
 				closedir(scripts_dir);
 				scnprintf(script_path, MAXPATHLEN, "%s/%s",
 					  lang_path, script_dirent->d_name);
+				closedir(lang_dir);
 				return strdup(script_path);
 			}
 			free(__script_root);
@@ -3467,6 +3514,7 @@ int cmd_script(int argc, const char **argv)
 			.mmap2		 = perf_event__process_mmap2,
 			.comm		 = perf_event__process_comm,
 			.namespaces	 = perf_event__process_namespaces,
+			.cgroup		 = perf_event__process_cgroup,
 			.exit		 = perf_event__process_exit,
 			.fork		 = perf_event__process_fork,
 			.attr		 = process_attr,
@@ -3555,6 +3603,7 @@ int cmd_script(int argc, const char **argv)
 		     "anything beyond the specified depth will be ignored. "
 		     "Default: kernel.perf_event_max_stack or " __stringify(PERF_MAX_STACK_DEPTH)),
 	OPT_BOOLEAN(0, "reltime", &reltime, "Show time stamps relative to start"),
+	OPT_BOOLEAN(0, "deltatime", &deltatime, "Show time stamps relative to previous event"),
 	OPT_BOOLEAN('I', "show-info", &show_full_info,
 		    "display extended information from perf.data file"),
 	OPT_BOOLEAN('\0', "show-kernel-path", &symbol_conf.show_kernel_path,
@@ -3567,6 +3616,8 @@ int cmd_script(int argc, const char **argv)
 		    "Show context switch events (if recorded)"),
 	OPT_BOOLEAN('\0', "show-namespace-events", &script.show_namespace_events,
 		    "Show namespace events (if recorded)"),
+	OPT_BOOLEAN('\0', "show-cgroup-events", &script.show_cgroup_events,
+		    "Show cgroup events (if recorded)"),
 	OPT_BOOLEAN('\0', "show-lost-events", &script.show_lost_events,
 		    "Show lost events (if recorded)"),
 	OPT_BOOLEAN('\0', "show-round-events", &script.show_round_events,
@@ -3651,6 +3702,13 @@ int cmd_script(int argc, const char **argv)
 		}
 	}
 
+	if (reltime && deltatime) {
+		fprintf(stderr,
+			"reltime and deltatime - the two don't get along well. "
+			"Please limit to --reltime or --deltatime.\n");
+		return -1;
+	}
+
 	if (itrace_synth_opts.callchain &&
 	    itrace_synth_opts.callchain_sz > scripting_max_stack)
 		scripting_max_stack = itrace_synth_opts.callchain_sz;
diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
index d2539b7..289cf83 100644
--- a/tools/perf/builtin-top.c
+++ b/tools/perf/builtin-top.c
@@ -616,6 +616,7 @@ static void *display_thread_tui(void *arg)
 		.arg		= top,
 		.refresh	= top->delay_secs,
 	};
+	int ret;
 
 	/* In order to read symbols from other namespaces perf to  needs to call
 	 * setns(2).  This isn't permitted if the struct_fs has multiple users.
@@ -626,6 +627,7 @@ static void *display_thread_tui(void *arg)
 
 	prctl(PR_SET_NAME, "perf-top-UI", 0, 0, 0);
 
+repeat:
 	perf_top__sort_new_samples(top);
 
 	/*
@@ -638,13 +640,18 @@ static void *display_thread_tui(void *arg)
 		hists->uid_filter_str = top->record_opts.target.uid_str;
 	}
 
-	perf_evlist__tui_browse_hists(top->evlist, help, &hbt,
+	ret = perf_evlist__tui_browse_hists(top->evlist, help, &hbt,
 				      top->min_percent,
 				      &top->session->header.env,
 				      !top->record_opts.overwrite,
 				      &top->annotation_opts);
 
-	stop_top();
+	if (ret == K_RELOAD) {
+		top->zero = true;
+		goto repeat;
+	} else
+		stop_top();
+
 	return NULL;
 }
 
@@ -1246,6 +1253,14 @@ static int __cmd_top(struct perf_top *top)
 
 	if (opts->record_namespaces)
 		top->tool.namespace_events = true;
+	if (opts->record_cgroup) {
+#ifdef HAVE_FILE_HANDLE
+		top->tool.cgroup_events = true;
+#else
+		pr_err("cgroup tracking is not supported.\n");
+		return -1;
+#endif
+	}
 
 	ret = perf_event__synthesize_bpf_events(top->session, perf_event__process,
 						&top->session->machines.host,
@@ -1253,6 +1268,11 @@ static int __cmd_top(struct perf_top *top)
 	if (ret < 0)
 		pr_debug("Couldn't synthesize BPF events: Pre-existing BPF programs won't have symbols resolved.\n");
 
+	ret = perf_event__synthesize_cgroups(&top->tool, perf_event__process,
+					     &top->session->machines.host);
+	if (ret < 0)
+		pr_debug("Couldn't synthesize cgroup events.\n");
+
 	machine__synthesize_threads(&top->session->machines.host, &opts->target,
 				    top->evlist->core.threads, false,
 				    top->nr_threads_synthesize);
@@ -1545,6 +1565,12 @@ int cmd_top(int argc, const char **argv)
 			"number of thread to run event synthesize"),
 	OPT_BOOLEAN(0, "namespaces", &opts->record_namespaces,
 		    "Record namespaces events"),
+	OPT_BOOLEAN(0, "all-cgroups", &opts->record_cgroup,
+		    "Record cgroup events"),
+	OPT_INTEGER(0, "group-sort-idx", &symbol_conf.group_sort_idx,
+		    "Sort the output by the event at the index n in group. "
+		    "If n is invalid, sort by the first event. "
+		    "WARNING: should be used on grouped events."),
 	OPTS_EVSWITCH(&top.evswitch),
 	OPT_END()
 	};
diff --git a/tools/perf/check-headers.sh b/tools/perf/check-headers.sh
index bfb21d0..cf147db 100755
--- a/tools/perf/check-headers.sh
+++ b/tools/perf/check-headers.sh
@@ -22,7 +22,9 @@
 include/uapi/linux/vhost.h
 include/uapi/sound/asound.h
 include/linux/bits.h
+include/vdso/bits.h
 include/linux/const.h
+include/vdso/const.h
 include/linux/hash.h
 include/uapi/linux/hw_breakpoint.h
 arch/x86/include/asm/disabled-features.h
@@ -115,6 +117,7 @@
 check arch/x86/lib/memset_64.S        '-I "^EXPORT_SYMBOL" -I "^#include <asm/export.h>" -I"^SYM_FUNC_START\(_LOCAL\)*(memset_\(erms\|orig\))"'
 check include/uapi/asm-generic/mman.h '-I "^#include <\(uapi/\)*asm-generic/mman-common\(-tools\)*.h>"'
 check include/uapi/linux/mman.h       '-I "^#include <\(uapi/\)*asm/mman.h>"'
+check include/linux/build_bug.h       '-I "^#\(ifndef\|endif\)\( \/\/\)* static_assert$"'
 check include/linux/ctype.h	      '-I "isdigit("'
 check lib/ctype.c		      '-I "^EXPORT_SYMBOL" -I "^#include <linux/export.h>" -B'
 check arch/x86/include/asm/inat.h     '-I "^#include [\"<]\(asm/\)*inat_types.h[\">]"'
diff --git a/tools/perf/pmu-events/arch/x86/amdfam17h/branch.json b/tools/perf/pmu-events/arch/test/test_cpu/branch.json
similarity index 100%
rename from tools/perf/pmu-events/arch/x86/amdfam17h/branch.json
rename to tools/perf/pmu-events/arch/test/test_cpu/branch.json
diff --git a/tools/perf/pmu-events/arch/test/test_cpu/other.json b/tools/perf/pmu-events/arch/test/test_cpu/other.json
new file mode 100644
index 0000000..7d53d7e
--- /dev/null
+++ b/tools/perf/pmu-events/arch/test/test_cpu/other.json
@@ -0,0 +1,26 @@
+[
+    {
+        "EventCode": "0x6",
+        "Counter": "0,1",
+        "UMask": "0x80",
+        "EventName": "SEGMENT_REG_LOADS.ANY",
+        "SampleAfterValue": "200000",
+        "BriefDescription": "Number of segment register loads."
+    },
+    {
+        "EventCode": "0x9",
+        "Counter": "0,1",
+        "UMask": "0x20",
+        "EventName": "DISPATCH_BLOCKED.ANY",
+        "SampleAfterValue": "200000",
+        "BriefDescription": "Memory cluster signals to block micro-op dispatch for any reason"
+    },
+    {
+        "EventCode": "0x3A",
+        "Counter": "0,1",
+        "UMask": "0x0",
+        "EventName": "EIST_TRANS",
+        "SampleAfterValue": "200000",
+        "BriefDescription": "Number of Enhanced Intel SpeedStep(R) Technology (EIST) transitions"
+    }
+]
\ No newline at end of file
diff --git a/tools/perf/pmu-events/arch/test/test_cpu/uncore.json b/tools/perf/pmu-events/arch/test/test_cpu/uncore.json
new file mode 100644
index 0000000..d0a890c
--- /dev/null
+++ b/tools/perf/pmu-events/arch/test/test_cpu/uncore.json
@@ -0,0 +1,21 @@
+[
+ {
+	    "EventCode": "0x02",
+	    "EventName": "uncore_hisi_ddrc.flux_wcmd",
+	    "BriefDescription": "DDRC write commands",
+	    "PublicDescription": "DDRC write commands",
+	    "Unit": "hisi_sccl,ddrc"
+   },
+   {
+	    "Unit": "CBO",
+	    "EventCode": "0x22",
+	    "UMask": "0x81",
+	    "EventName": "UNC_CBO_XSNP_RESPONSE.MISS_EVICTION",
+	    "BriefDescription": "A cross-core snoop resulted from L3 Eviction which misses in some processor core.",
+	    "PublicDescription": "A cross-core snoop resulted from L3 Eviction which misses in some processor core.",
+	    "Counter": "0,1",
+	    "CounterMask": "0",
+	    "Invert": "0",
+	    "EdgeDetect": "0"
+  }
+]
diff --git a/tools/perf/pmu-events/arch/x86/amdfam17h/cache.json b/tools/perf/pmu-events/arch/x86/amdfam17h/cache.json
deleted file mode 100644
index 6221a84..0000000
--- a/tools/perf/pmu-events/arch/x86/amdfam17h/cache.json
+++ /dev/null
@@ -1,329 +0,0 @@
-[
-  {
-    "EventName": "ic_fw32",
-    "EventCode": "0x80",
-    "BriefDescription": "The number of 32B fetch windows transferred from IC pipe to DE instruction decoder (includes non-cacheable and cacheable fill responses)."
-  },
-  {
-    "EventName": "ic_fw32_miss",
-    "EventCode": "0x81",
-    "BriefDescription": "The number of 32B fetch windows tried to read the L1 IC and missed in the full tag."
-  },
-  {
-    "EventName": "ic_cache_fill_l2",
-    "EventCode": "0x82",
-    "BriefDescription": "The number of 64 byte instruction cache line was fulfilled from the L2 cache."
-  },
-  {
-    "EventName": "ic_cache_fill_sys",
-    "EventCode": "0x83",
-    "BriefDescription": "The number of 64 byte instruction cache line fulfilled from system memory or another cache."
-  },
-  {
-    "EventName": "bp_l1_tlb_miss_l2_hit",
-    "EventCode": "0x84",
-    "BriefDescription": "The number of instruction fetches that miss in the L1 ITLB but hit in the L2 ITLB."
-  },
-  {
-    "EventName": "bp_l1_tlb_miss_l2_miss",
-    "EventCode": "0x85",
-    "BriefDescription": "The number of instruction fetches that miss in both the L1 and L2 TLBs."
-  },
-  {
-    "EventName": "bp_snp_re_sync",
-    "EventCode": "0x86",
-    "BriefDescription": "The number of pipeline restarts caused by invalidating probes that hit on the instruction stream currently being executed. This would happen if the active instruction stream was being modified by another processor in an MP system - typically a highly unlikely event."
-  },
-  {
-    "EventName": "ic_fetch_stall.ic_stall_any",
-    "EventCode": "0x87",
-    "BriefDescription": "IC pipe was stalled during this clock cycle for any reason (nothing valid in pipe ICM1).",
-    "PublicDescription": "Instruction Pipe Stall. IC pipe was stalled during this clock cycle for any reason (nothing valid in pipe ICM1).",
-    "UMask": "0x4"
-  },
-  {
-    "EventName": "ic_fetch_stall.ic_stall_dq_empty",
-    "EventCode": "0x87",
-    "BriefDescription": "IC pipe was stalled during this clock cycle (including IC to OC fetches) due to DQ empty.",
-    "PublicDescription": "Instruction Pipe Stall. IC pipe was stalled during this clock cycle (including IC to OC fetches) due to DQ empty.",
-    "UMask": "0x2"
-  },
-  {
-    "EventName": "ic_fetch_stall.ic_stall_back_pressure",
-    "EventCode": "0x87",
-    "BriefDescription": "IC pipe was stalled during this clock cycle (including IC to OC fetches) due to back-pressure.",
-    "PublicDescription": "Instruction Pipe Stall. IC pipe was stalled during this clock cycle (including IC to OC fetches) due to back-pressure.",
-    "UMask": "0x1"
-  },
-  {
-    "EventName": "ic_cache_inval.l2_invalidating_probe",
-    "EventCode": "0x8c",
-    "BriefDescription": "IC line invalidated due to L2 invalidating probe (external or LS).",
-    "PublicDescription": "The number of instruction cache lines invalidated. A non-SMC event is CMC (cross modifying code), either from the other thread of the core or another core. IC line invalidated due to L2 invalidating probe (external or LS).",
-    "UMask": "0x2"
-  },
-  {
-    "EventName": "ic_cache_inval.fill_invalidated",
-    "EventCode": "0x8c",
-    "BriefDescription": "IC line invalidated due to overwriting fill response.",
-    "PublicDescription": "The number of instruction cache lines invalidated. A non-SMC event is CMC (cross modifying code), either from the other thread of the core or another core. IC line invalidated due to overwriting fill response.",
-    "UMask": "0x1"
-  },
-  {
-    "EventName": "bp_tlb_rel",
-    "EventCode": "0x99",
-    "BriefDescription": "The number of ITLB reload requests."
-  },
-  {
-    "EventName": "l2_request_g1.rd_blk_l",
-    "EventCode": "0x60",
-    "BriefDescription": "Requests to L2 Group1.",
-    "PublicDescription": "Requests to L2 Group1.",
-    "UMask": "0x80"
-  },
-  {
-    "EventName": "l2_request_g1.rd_blk_x",
-    "EventCode": "0x60",
-    "BriefDescription": "Requests to L2 Group1.",
-    "PublicDescription": "Requests to L2 Group1.",
-    "UMask": "0x40"
-  },
-  {
-    "EventName": "l2_request_g1.ls_rd_blk_c_s",
-    "EventCode": "0x60",
-    "BriefDescription": "Requests to L2 Group1.",
-    "PublicDescription": "Requests to L2 Group1.",
-    "UMask": "0x20"
-  },
-  {
-    "EventName": "l2_request_g1.cacheable_ic_read",
-    "EventCode": "0x60",
-    "BriefDescription": "Requests to L2 Group1.",
-    "PublicDescription": "Requests to L2 Group1.",
-    "UMask": "0x10"
-  },
-  {
-    "EventName": "l2_request_g1.change_to_x",
-    "EventCode": "0x60",
-    "BriefDescription": "Requests to L2 Group1.",
-    "PublicDescription": "Requests to L2 Group1.",
-    "UMask": "0x8"
-  },
-  {
-    "EventName": "l2_request_g1.prefetch_l2",
-    "EventCode": "0x60",
-    "BriefDescription": "Requests to L2 Group1.",
-    "PublicDescription": "Requests to L2 Group1.",
-    "UMask": "0x4"
-  },
-  {
-    "EventName": "l2_request_g1.l2_hw_pf",
-    "EventCode": "0x60",
-    "BriefDescription": "Requests to L2 Group1.",
-    "PublicDescription": "Requests to L2 Group1.",
-    "UMask": "0x2"
-  },
-  {
-    "EventName": "l2_request_g1.other_requests",
-    "EventCode": "0x60",
-    "BriefDescription": "Events covered by l2_request_g2.",
-    "PublicDescription": "Requests to L2 Group1. Events covered by l2_request_g2.",
-    "UMask": "0x1"
-  },
-  {
-    "EventName": "l2_request_g2.group1",
-    "EventCode": "0x61",
-    "BriefDescription": "All Group 1 commands not in unit0.",
-    "PublicDescription": "Multi-events in that LS and IF requests can be received simultaneous. All Group 1 commands not in unit0.",
-    "UMask": "0x80"
-  },
-  {
-    "EventName": "l2_request_g2.ls_rd_sized",
-    "EventCode": "0x61",
-    "BriefDescription": "RdSized, RdSized32, RdSized64.",
-    "PublicDescription": "Multi-events in that LS and IF requests can be received simultaneous. RdSized, RdSized32, RdSized64.",
-    "UMask": "0x40"
-  },
-  {
-    "EventName": "l2_request_g2.ls_rd_sized_nc",
-    "EventCode": "0x61",
-    "BriefDescription": "RdSizedNC, RdSized32NC, RdSized64NC.",
-    "PublicDescription": "Multi-events in that LS and IF requests can be received simultaneous. RdSizedNC, RdSized32NC, RdSized64NC.",
-    "UMask": "0x20"
-  },
-  {
-    "EventName": "l2_request_g2.ic_rd_sized",
-    "EventCode": "0x61",
-    "BriefDescription": "Multi-events in that LS and IF requests can be received simultaneous.",
-    "PublicDescription": "Multi-events in that LS and IF requests can be received simultaneous.",
-    "UMask": "0x10"
-  },
-  {
-    "EventName": "l2_request_g2.ic_rd_sized_nc",
-    "EventCode": "0x61",
-    "BriefDescription": "Multi-events in that LS and IF requests can be received simultaneous.",
-    "PublicDescription": "Multi-events in that LS and IF requests can be received simultaneous.",
-    "UMask": "0x8"
-  },
-  {
-    "EventName": "l2_request_g2.smc_inval",
-    "EventCode": "0x61",
-    "BriefDescription": "Multi-events in that LS and IF requests can be received simultaneous.",
-    "PublicDescription": "Multi-events in that LS and IF requests can be received simultaneous.",
-    "UMask": "0x4"
-  },
-  {
-    "EventName": "l2_request_g2.bus_locks_originator",
-    "EventCode": "0x61",
-    "BriefDescription": "Multi-events in that LS and IF requests can be received simultaneous.",
-    "PublicDescription": "Multi-events in that LS and IF requests can be received simultaneous.",
-    "UMask": "0x2"
-  },
-  {
-    "EventName": "l2_request_g2.bus_locks_responses",
-    "EventCode": "0x61",
-    "BriefDescription": "Multi-events in that LS and IF requests can be received simultaneous.",
-    "PublicDescription": "Multi-events in that LS and IF requests can be received simultaneous.",
-    "UMask": "0x1"
-  },
-  {
-    "EventName": "l2_latency.l2_cycles_waiting_on_fills",
-    "EventCode": "0x62",
-    "BriefDescription": "Total cycles spent waiting for L2 fills to complete from L3 or memory, divided by four. Event counts are for both threads. To calculate average latency, the number of fills from both threads must be used.",
-    "PublicDescription": "Total cycles spent waiting for L2 fills to complete from L3 or memory, divided by four. Event counts are for both threads. To calculate average latency, the number of fills from both threads must be used.",
-    "UMask": "0x1"
-  },
-  {
-    "EventName": "l2_wcb_req.wcb_write",
-    "EventCode": "0x63",
-    "PublicDescription": "LS (Load/Store unit) to L2 WCB (Write Combining Buffer) write requests.",
-    "BriefDescription": "LS to L2 WCB write requests.",
-    "UMask": "0x40"
-  },
-  {
-    "EventName": "l2_wcb_req.wcb_close",
-    "EventCode": "0x63",
-    "BriefDescription": "LS to L2 WCB close requests.",
-    "PublicDescription": "LS (Load/Store unit) to L2 WCB (Write Combining Buffer) close requests.",
-    "UMask": "0x20"
-  },
-  {
-    "EventName": "l2_wcb_req.zero_byte_store",
-    "EventCode": "0x63",
-    "BriefDescription": "LS to L2 WCB zero byte store requests.",
-    "PublicDescription": "LS (Load/Store unit) to L2 WCB (Write Combining Buffer) zero byte store requests.",
-    "UMask": "0x4"
-  },
-  {
-    "EventName": "l2_wcb_req.cl_zero",
-    "EventCode": "0x63",
-    "PublicDescription": "LS to L2 WCB cache line zeroing requests.",
-    "BriefDescription": "LS (Load/Store unit) to L2 WCB (Write Combining Buffer) cache line zeroing requests.",
-    "UMask": "0x1"
-  },
-  {
-    "EventName": "l2_cache_req_stat.ls_rd_blk_cs",
-    "EventCode": "0x64",
-    "BriefDescription": "LS ReadBlock C/S Hit.",
-    "PublicDescription": "This event does not count accesses to the L2 cache by the L2 prefetcher, but it does count accesses by the L1 prefetcher. LS ReadBlock C/S Hit.",
-    "UMask": "0x80"
-  },
-  {
-    "EventName": "l2_cache_req_stat.ls_rd_blk_l_hit_x",
-    "EventCode": "0x64",
-    "BriefDescription": "LS Read Block L Hit X.",
-    "PublicDescription": "This event does not count accesses to the L2 cache by the L2 prefetcher, but it does count accesses by the L1 prefetcher. LS Read Block L Hit X.",
-    "UMask": "0x40"
-  },
-  {
-    "EventName": "l2_cache_req_stat.ls_rd_blk_l_hit_s",
-    "EventCode": "0x64",
-    "BriefDescription": "LsRdBlkL Hit Shared.",
-    "PublicDescription": "This event does not count accesses to the L2 cache by the L2 prefetcher, but it does count accesses by the L1 prefetcher. LsRdBlkL Hit Shared.",
-    "UMask": "0x20"
-  },
-  {
-    "EventName": "l2_cache_req_stat.ls_rd_blk_x",
-    "EventCode": "0x64",
-    "BriefDescription": "LsRdBlkX/ChgToX Hit X.  Count RdBlkX finding Shared as a Miss.",
-    "PublicDescription": "This event does not count accesses to the L2 cache by the L2 prefetcher, but it does count accesses by the L1 prefetcher. LsRdBlkX/ChgToX Hit X.  Count RdBlkX finding Shared as a Miss.",
-    "UMask": "0x10"
-  },
-  {
-    "EventName": "l2_cache_req_stat.ls_rd_blk_c",
-    "EventCode": "0x64",
-    "BriefDescription": "LS Read Block C S L X Change to X Miss.",
-    "PublicDescription": "This event does not count accesses to the L2 cache by the L2 prefetcher, but it does count accesses by the L1 prefetcher. LS Read Block C S L X Change to X Miss.",
-    "UMask": "0x8"
-  },
-  {
-    "EventName": "l2_cache_req_stat.ic_fill_hit_x",
-    "EventCode": "0x64",
-    "BriefDescription": "IC Fill Hit Exclusive Stale.",
-    "PublicDescription": "This event does not count accesses to the L2 cache by the L2 prefetcher, but it does count accesses by the L1 prefetcher. IC Fill Hit Exclusive Stale.",
-    "UMask": "0x4"
-  },
-  {
-    "EventName": "l2_cache_req_stat.ic_fill_hit_s",
-    "EventCode": "0x64",
-    "BriefDescription": "IC Fill Hit Shared.",
-    "PublicDescription": "This event does not count accesses to the L2 cache by the L2 prefetcher, but it does count accesses by the L1 prefetcher. IC Fill Hit Shared.",
-    "UMask": "0x2"
-  },
-  {
-    "EventName": "l2_cache_req_stat.ic_fill_miss",
-    "EventCode": "0x64",
-    "BriefDescription": "IC Fill Miss.",
-    "PublicDescription": "This event does not count accesses to the L2 cache by the L2 prefetcher, but it does count accesses by the L1 prefetcher. IC Fill Miss.",
-    "UMask": "0x1"
-  },
-  {
-    "EventName": "l2_fill_pending.l2_fill_busy",
-    "EventCode": "0x6d",
-    "BriefDescription": "Total cycles spent with one or more fill requests in flight from L2.",
-    "PublicDescription": "Total cycles spent with one or more fill requests in flight from L2.",
-    "UMask": "0x1"
-  },
-  {
-    "EventName": "l3_request_g1.caching_l3_cache_accesses",
-    "EventCode": "0x01",
-    "BriefDescription": "Caching: L3 cache accesses",
-    "UMask": "0x80",
-    "Unit": "L3PMC"
-  },
-  {
-    "EventName": "l3_lookup_state.all_l3_req_typs",
-    "EventCode": "0x04",
-    "BriefDescription": "All L3 Request Types",
-    "UMask": "0xff",
-    "Unit": "L3PMC"
-  },
-  {
-    "EventName": "l3_comb_clstr_state.other_l3_miss_typs",
-    "EventCode": "0x06",
-    "BriefDescription": "Other L3 Miss Request Types",
-    "UMask": "0xfe",
-    "Unit": "L3PMC"
-  },
-  {
-    "EventName": "l3_comb_clstr_state.request_miss",
-    "EventCode": "0x06",
-    "BriefDescription": "L3 cache misses",
-    "UMask": "0x01",
-    "Unit": "L3PMC"
-  },
-  {
-    "EventName": "xi_sys_fill_latency",
-    "EventCode": "0x90",
-    "BriefDescription": "L3 Cache Miss Latency. Total cycles for all transactions divided by 16. Ignores SliceMask and ThreadMask.",
-    "UMask": "0x00",
-    "Unit": "L3PMC"
-  },
-  {
-    "EventName": "xi_ccx_sdp_req1.all_l3_miss_req_typs",
-    "EventCode": "0x9a",
-    "BriefDescription": "All L3 Miss Request Types. Ignores SliceMask and ThreadMask.",
-    "UMask": "0x3f",
-    "Unit": "L3PMC"
-  }
-]
diff --git a/tools/perf/pmu-events/arch/x86/amdfam17h/core.json b/tools/perf/pmu-events/arch/x86/amdfam17h/core.json
deleted file mode 100644
index 1079544..0000000
--- a/tools/perf/pmu-events/arch/x86/amdfam17h/core.json
+++ /dev/null
@@ -1,134 +0,0 @@
-[
-  {
-    "EventName": "ex_ret_instr",
-    "EventCode": "0xc0",
-    "BriefDescription": "Retired Instructions."
-  },
-  {
-    "EventName": "ex_ret_cops",
-    "EventCode": "0xc1",
-    "BriefDescription": "Retired Uops.",
-    "PublicDescription": "The number of uOps retired. This includes all processor activity (instructions, exceptions, interrupts, microcode assists, etc.). The number of events logged per cycle can vary from 0 to 4."
-  },
-  {
-    "EventName": "ex_ret_brn",
-    "EventCode": "0xc2",
-    "BriefDescription": "Retired Branch Instructions.",
-    "PublicDescription": "The number of branch instructions retired. This includes all types of architectural control flow changes, including exceptions and interrupts."
-  },
-  {
-    "EventName": "ex_ret_brn_misp",
-    "EventCode": "0xc3",
-    "BriefDescription": "Retired Branch Instructions Mispredicted.",
-    "PublicDescription": "The number of branch instructions retired, of any type, that were not correctly predicted. This includes those for which prediction is not attempted (far control transfers, exceptions and interrupts)."
-  },
-  {
-    "EventName": "ex_ret_brn_tkn",
-    "EventCode": "0xc4",
-    "BriefDescription": "Retired Taken Branch Instructions.",
-    "PublicDescription": "The number of taken branches that were retired. This includes all types of architectural control flow changes, including exceptions and interrupts."
-  },
-  {
-    "EventName": "ex_ret_brn_tkn_misp",
-    "EventCode": "0xc5",
-    "BriefDescription": "Retired Taken Branch Instructions Mispredicted.",
-    "PublicDescription": "The number of retired taken branch instructions that were mispredicted."
-  },
-  {
-    "EventName": "ex_ret_brn_far",
-    "EventCode": "0xc6",
-    "BriefDescription": "Retired Far Control Transfers.",
-    "PublicDescription": "The number of far control transfers retired including far call/jump/return, IRET, SYSCALL and SYSRET, plus exceptions and interrupts. Far control transfers are not subject to branch prediction."
-  },
-  {
-    "EventName": "ex_ret_brn_resync",
-    "EventCode": "0xc7",
-    "BriefDescription": "Retired Branch Resyncs.",
-    "PublicDescription": "The number of resync branches. These reflect pipeline restarts due to certain microcode assists and events such as writes to the active instruction stream, among other things. Each occurrence reflects a restart penalty similar to a branch mispredict. This is relatively rare."
-  },
-  {
-    "EventName": "ex_ret_near_ret",
-    "EventCode": "0xc8",
-    "BriefDescription": "Retired Near Returns.",
-    "PublicDescription": "The number of near return instructions (RET or RET Iw) retired."
-  },
-  {
-    "EventName": "ex_ret_near_ret_mispred",
-    "EventCode": "0xc9",
-    "BriefDescription": "Retired Near Returns Mispredicted.",
-    "PublicDescription": "The number of near returns retired that were not correctly predicted by the return address predictor. Each such mispredict incurs the same penalty as a mispredicted conditional branch instruction."
-  },
-  {
-    "EventName": "ex_ret_brn_ind_misp",
-    "EventCode": "0xca",
-    "BriefDescription": "Retired Indirect Branch Instructions Mispredicted.",
-    "PublicDescription": "Retired Indirect Branch Instructions Mispredicted."
-  },
-  {
-    "EventName": "ex_ret_mmx_fp_instr.sse_instr",
-    "EventCode": "0xcb",
-    "BriefDescription": "SSE instructions (SSE, SSE2, SSE3, SSSE3, SSE4A, SSE41, SSE42, AVX).",
-    "PublicDescription": "The number of MMX, SSE or x87 instructions retired. The UnitMask allows the selection of the individual classes of instructions as given in the table. Each increment represents one complete instruction. Since this event includes non-numeric instructions it is not suitable for measuring MFLOPS. SSE instructions (SSE, SSE2, SSE3, SSSE3, SSE4A, SSE41, SSE42, AVX).",
-    "UMask": "0x4"
-  },
-  {
-    "EventName": "ex_ret_mmx_fp_instr.mmx_instr",
-    "EventCode": "0xcb",
-    "BriefDescription": "MMX instructions.",
-    "PublicDescription": "The number of MMX, SSE or x87 instructions retired. The UnitMask allows the selection of the individual classes of instructions as given in the table. Each increment represents one complete instruction. Since this event includes non-numeric instructions it is not suitable for measuring MFLOPS. MMX instructions.",
-    "UMask": "0x2"
-  },
-  {
-    "EventName": "ex_ret_mmx_fp_instr.x87_instr",
-    "EventCode": "0xcb",
-    "BriefDescription": "x87 instructions.",
-    "PublicDescription": "The number of MMX, SSE or x87 instructions retired. The UnitMask allows the selection of the individual classes of instructions as given in the table. Each increment represents one complete instruction. Since this event includes non-numeric instructions it is not suitable for measuring MFLOPS. x87 instructions.",
-    "UMask": "0x1"
-  },
-  {
-    "EventName": "ex_ret_cond",
-    "EventCode": "0xd1",
-    "BriefDescription": "Retired Conditional Branch Instructions."
-  },
-  {
-    "EventName": "ex_ret_cond_misp",
-    "EventCode": "0xd2",
-    "BriefDescription": "Retired Conditional Branch Instructions Mispredicted."
-  },
-  {
-    "EventName": "ex_div_busy",
-    "EventCode": "0xd3",
-    "BriefDescription": "Div Cycles Busy count."
-  },
-  {
-    "EventName": "ex_div_count",
-    "EventCode": "0xd4",
-    "BriefDescription": "Div Op Count."
-  },
-  {
-    "EventName": "ex_tagged_ibs_ops.ibs_count_rollover",
-    "EventCode": "0x1cf",
-    "BriefDescription": "Number of times an op could not be tagged by IBS because of a previous tagged op that has not retired.",
-    "PublicDescription": "Tagged IBS Ops. Number of times an op could not be tagged by IBS because of a previous tagged op that has not retired.",
-    "UMask": "0x4"
-  },
-  {
-    "EventName": "ex_tagged_ibs_ops.ibs_tagged_ops_ret",
-    "EventCode": "0x1cf",
-    "BriefDescription": "Number of Ops tagged by IBS that retired.",
-    "PublicDescription": "Tagged IBS Ops. Number of Ops tagged by IBS that retired.",
-    "UMask": "0x2"
-  },
-  {
-    "EventName": "ex_tagged_ibs_ops.ibs_tagged_ops",
-    "EventCode": "0x1cf",
-    "BriefDescription": "Number of Ops tagged by IBS.",
-    "PublicDescription": "Tagged IBS Ops. Number of Ops tagged by IBS.",
-    "UMask": "0x1"
-  },
-  {
-    "EventName": "ex_ret_fus_brnch_inst",
-    "EventCode": "0x1d0",
-    "BriefDescription": "The number of fused retired branch instructions retired per cycle. The number of events logged per cycle can vary from 0 to 3."
-  }
-]
diff --git a/tools/perf/pmu-events/arch/x86/amdfam17h/floating-point.json b/tools/perf/pmu-events/arch/x86/amdfam17h/floating-point.json
deleted file mode 100644
index ea47119..0000000
--- a/tools/perf/pmu-events/arch/x86/amdfam17h/floating-point.json
+++ /dev/null
@@ -1,168 +0,0 @@
-[
-  {
-    "EventName": "fpu_pipe_assignment.dual",
-    "EventCode": "0x00",
-    "BriefDescription": "Total number multi-pipe uOps.",
-    "PublicDescription": "The number of operations (uOps) and dual-pipe uOps dispatched to each of the 4 FPU execution pipelines. This event reflects how busy the FPU pipelines are and may be used for workload characterization. This includes all operations performed by x87, MMX, and SSE instructions, including moves. Each increment represents a one- cycle dispatch event. This event is a speculative event. Since this event includes non-numeric operations it is not suitable for measuring MFLOPS. Total number multi-pipe uOps assigned to Pipe 3.",
-    "UMask": "0xf0"
-  },
-  {
-    "EventName": "fpu_pipe_assignment.total",
-    "EventCode": "0x00",
-    "BriefDescription": "Total number uOps.",
-    "PublicDescription": "The number of operations (uOps) and dual-pipe uOps dispatched to each of the 4 FPU execution pipelines. This event reflects how busy the FPU pipelines are and may be used for workload characterization. This includes all operations performed by x87, MMX, and SSE instructions, including moves. Each increment represents a one- cycle dispatch event. This event is a speculative event. Since this event includes non-numeric operations it is not suitable for measuring MFLOPS. Total number uOps assigned to Pipe 3.",
-    "UMask": "0xf"
-  },
-  {
-    "EventName": "fp_sched_empty",
-    "EventCode": "0x01",
-    "BriefDescription": "This is a speculative event. The number of cycles in which the FPU scheduler is empty. Note that some Ops like FP loads bypass the scheduler."
-  },
-  {
-    "EventName": "fp_retx87_fp_ops.all",
-    "EventCode": "0x02",
-    "BriefDescription": "All Ops.",
-    "PublicDescription": "The number of x87 floating-point Ops that have retired. The number of events logged per cycle can vary from 0 to 8.",
-    "UMask": "0x7"
-  },
-  {
-    "EventName": "fp_retx87_fp_ops.div_sqr_r_ops",
-    "EventCode": "0x02",
-    "BriefDescription": "Divide and square root Ops.",
-    "PublicDescription": "The number of x87 floating-point Ops that have retired. The number of events logged per cycle can vary from 0 to 8. Divide and square root Ops.",
-    "UMask": "0x4"
-  },
-  {
-    "EventName": "fp_retx87_fp_ops.mul_ops",
-    "EventCode": "0x02",
-    "BriefDescription": "Multiply Ops.",
-    "PublicDescription": "The number of x87 floating-point Ops that have retired. The number of events logged per cycle can vary from 0 to 8. Multiply Ops.",
-    "UMask": "0x2"
-  },
-  {
-    "EventName": "fp_retx87_fp_ops.add_sub_ops",
-    "EventCode": "0x02",
-    "BriefDescription": "Add/subtract Ops.",
-    "PublicDescription": "The number of x87 floating-point Ops that have retired. The number of events logged per cycle can vary from 0 to 8. Add/subtract Ops.",
-    "UMask": "0x1"
-  },
-  {
-    "EventName": "fp_ret_sse_avx_ops.all",
-    "EventCode": "0x03",
-    "BriefDescription": "All FLOPS.",
-    "PublicDescription": "This is a retire-based event. The number of retired SSE/AVX FLOPS. The number of events logged per cycle can vary from 0 to 64. This event can count above 15.",
-    "UMask": "0xff"
-  },
-  {
-    "EventName": "fp_ret_sse_avx_ops.dp_mult_add_flops",
-    "EventCode": "0x03",
-    "BriefDescription": "Double precision multiply-add FLOPS. Multiply-add counts as 2 FLOPS.",
-    "PublicDescription": "This is a retire-based event. The number of retired SSE/AVX FLOPS. The number of events logged per cycle can vary from 0 to 64. This event can count above 15. Double precision multiply-add FLOPS. Multiply-add counts as 2 FLOPS.",
-    "UMask": "0x80"
-  },
-  {
-    "EventName": "fp_ret_sse_avx_ops.dp_div_flops",
-    "EventCode": "0x03",
-    "BriefDescription": "Double precision divide/square root FLOPS.",
-    "PublicDescription": "This is a retire-based event. The number of retired SSE/AVX FLOPS. The number of events logged per cycle can vary from 0 to 64. This event can count above 15. Double precision divide/square root FLOPS.",
-    "UMask": "0x40"
-  },
-  {
-    "EventName": "fp_ret_sse_avx_ops.dp_mult_flops",
-    "EventCode": "0x03",
-    "BriefDescription": "Double precision multiply FLOPS.",
-    "PublicDescription": "This is a retire-based event. The number of retired SSE/AVX FLOPS. The number of events logged per cycle can vary from 0 to 64. This event can count above 15. Double precision multiply FLOPS.",
-    "UMask": "0x20"
-  },
-  {
-    "EventName": "fp_ret_sse_avx_ops.dp_add_sub_flops",
-    "EventCode": "0x03",
-    "BriefDescription": "Double precision add/subtract FLOPS.",
-    "PublicDescription": "This is a retire-based event. The number of retired SSE/AVX FLOPS. The number of events logged per cycle can vary from 0 to 64. This event can count above 15. Double precision add/subtract FLOPS.",
-    "UMask": "0x10"
-  },
-  {
-    "EventName": "fp_ret_sse_avx_ops.sp_mult_add_flops",
-    "EventCode": "0x03",
-    "BriefDescription": "Single precision multiply-add FLOPS. Multiply-add counts as 2 FLOPS.",
-    "PublicDescription": "This is a retire-based event. The number of retired SSE/AVX FLOPS. The number of events logged per cycle can vary from 0 to 64. This event can count above 15. Single precision multiply-add FLOPS. Multiply-add counts as 2 FLOPS.",
-    "UMask": "0x8"
-  },
-  {
-    "EventName": "fp_ret_sse_avx_ops.sp_div_flops",
-    "EventCode": "0x03",
-    "BriefDescription": "Single-precision divide/square root FLOPS.",
-    "PublicDescription": "This is a retire-based event. The number of retired SSE/AVX FLOPS. The number of events logged per cycle can vary from 0 to 64. This event can count above 15. Single-precision divide/square root FLOPS.",
-    "UMask": "0x4"
-  },
-  {
-    "EventName": "fp_ret_sse_avx_ops.sp_mult_flops",
-    "EventCode": "0x03",
-    "BriefDescription": "Single-precision multiply FLOPS.",
-    "PublicDescription": "This is a retire-based event. The number of retired SSE/AVX FLOPS. The number of events logged per cycle can vary from 0 to 64. This event can count above 15. Single-precision multiply FLOPS.",
-    "UMask": "0x2"
-  },
-  {
-    "EventName": "fp_ret_sse_avx_ops.sp_add_sub_flops",
-    "EventCode": "0x03",
-    "BriefDescription": "Single-precision add/subtract FLOPS.",
-    "PublicDescription": "This is a retire-based event. The number of retired SSE/AVX FLOPS. The number of events logged per cycle can vary from 0 to 64. This event can count above 15. Single-precision add/subtract FLOPS.",
-    "UMask": "0x1"
-  },
-  {
-    "EventName": "fp_num_mov_elim_scal_op.optimized",
-    "EventCode": "0x04",
-    "BriefDescription": "Number of Scalar Ops optimized.",
-    "PublicDescription": "This is a dispatch based speculative event, and is useful for measuring the effectiveness of the Move elimination and Scalar code optimization schemes. Number of Scalar Ops optimized.",
-    "UMask": "0x8"
-  },
-  {
-    "EventName": "fp_num_mov_elim_scal_op.opt_potential",
-    "EventCode": "0x04",
-    "BriefDescription": "Number of Ops that are candidates for optimization (have Z-bit either set or pass).",
-    "PublicDescription": "This is a dispatch based speculative event, and is useful for measuring the effectiveness of the Move elimination and Scalar code optimization schemes. Number of Ops that are candidates for optimization (have Z-bit either set or pass).",
-    "UMask": "0x4"
-  },
-  {
-    "EventName": "fp_num_mov_elim_scal_op.sse_mov_ops_elim",
-    "EventCode": "0x04",
-    "BriefDescription": "Number of SSE Move Ops eliminated.",
-    "PublicDescription": "This is a dispatch based speculative event, and is useful for measuring the effectiveness of the Move elimination and Scalar code optimization schemes. Number of SSE Move Ops eliminated.",
-    "UMask": "0x2"
-  },
-  {
-    "EventName": "fp_num_mov_elim_scal_op.sse_mov_ops",
-    "EventCode": "0x04",
-    "BriefDescription": "Number of SSE Move Ops.",
-    "PublicDescription": "This is a dispatch based speculative event, and is useful for measuring the effectiveness of the Move elimination and Scalar code optimization schemes. Number of SSE Move Ops.",
-    "UMask": "0x1"
-  },
-  {
-    "EventName": "fp_retired_ser_ops.x87_ctrl_ret",
-    "EventCode": "0x05",
-    "BriefDescription": "x87 control word mispredict traps due to mispredictions in RC or PC, or changes in mask bits.",
-    "PublicDescription": "The number of serializing Ops retired. x87 control word mispredict traps due to mispredictions in RC or PC, or changes in mask bits.",
-    "UMask": "0x8"
-  },
-  {
-    "EventName": "fp_retired_ser_ops.x87_bot_ret",
-    "EventCode": "0x05",
-    "BriefDescription": "x87 bottom-executing uOps retired.",
-    "PublicDescription": "The number of serializing Ops retired. x87 bottom-executing uOps retired.",
-    "UMask": "0x4"
-  },
-  {
-    "EventName": "fp_retired_ser_ops.sse_ctrl_ret",
-    "EventCode": "0x05",
-    "BriefDescription": "SSE control word mispredict traps due to mispredictions in RC, FTZ or DAZ, or changes in mask bits.",
-    "PublicDescription": "The number of serializing Ops retired. SSE control word mispredict traps due to mispredictions in RC, FTZ or DAZ, or changes in mask bits.",
-    "UMask": "0x2"
-  },
-  {
-    "EventName": "fp_retired_ser_ops.sse_bot_ret",
-    "EventCode": "0x05",
-    "BriefDescription": "SSE bottom-executing uOps retired.",
-    "PublicDescription": "The number of serializing Ops retired. SSE bottom-executing uOps retired.",
-    "UMask": "0x1"
-  }
-]
diff --git a/tools/perf/pmu-events/arch/x86/amdfam17h/memory.json b/tools/perf/pmu-events/arch/x86/amdfam17h/memory.json
deleted file mode 100644
index fa2d60d..0000000
--- a/tools/perf/pmu-events/arch/x86/amdfam17h/memory.json
+++ /dev/null
@@ -1,162 +0,0 @@
-[
-  {
-    "EventName": "ls_locks.bus_lock",
-    "EventCode": "0x25",
-    "BriefDescription": "Bus lock when a locked operations crosses a cache boundary or is done on an uncacheable memory type.",
-    "PublicDescription": "Bus lock when a locked operations crosses a cache boundary or is done on an uncacheable memory type.",
-    "UMask": "0x1"
-  },
-  {
-    "EventName": "ls_dispatch.ld_st_dispatch",
-    "EventCode": "0x29",
-    "BriefDescription": "Load-op-Stores.",
-    "PublicDescription": "Counts the number of operations dispatched to the LS unit. Unit Masks ADDed. Load-op-Stores.",
-    "UMask": "0x4"
-  },
-  {
-    "EventName": "ls_dispatch.store_dispatch",
-    "EventCode": "0x29",
-    "BriefDescription": "Counts the number of operations dispatched to the LS unit. Unit Masks ADDed.",
-    "PublicDescription": "Counts the number of operations dispatched to the LS unit. Unit Masks ADDed.",
-    "UMask": "0x2"
-  },
-  {
-    "EventName": "ls_dispatch.ld_dispatch",
-    "EventCode": "0x29",
-    "BriefDescription": "Counts the number of operations dispatched to the LS unit. Unit Masks ADDed.",
-    "PublicDescription": "Counts the number of operations dispatched to the LS unit. Unit Masks ADDed.",
-    "UMask": "0x1"
-  },
-  {
-    "EventName": "ls_stlf",
-    "EventCode": "0x35",
-    "BriefDescription": "Number of STLF hits."
-  },
-  {
-    "EventName": "ls_dc_accesses",
-    "EventCode": "0x40",
-    "BriefDescription": "The number of accesses to the data cache for load and store references. This may include certain microcode scratchpad accesses, although these are generally rare. Each increment represents an eight-byte access, although the instruction may only be accessing a portion of that. This event is a speculative event."
-  },
-  {
-    "EventName": "ls_l1_d_tlb_miss.all",
-    "EventCode": "0x45",
-    "BriefDescription": "L1 DTLB Miss or Reload off all sizes.",
-    "PublicDescription": "L1 DTLB Miss or Reload off all sizes.",
-    "UMask": "0xff"
-  },
-  {
-    "EventName": "ls_l1_d_tlb_miss.tlb_reload_1g_l2_miss",
-    "EventCode": "0x45",
-    "BriefDescription": "L1 DTLB Miss of a page of 1G size.",
-    "PublicDescription": "L1 DTLB Miss of a page of 1G size.",
-    "UMask": "0x80"
-  },
-  {
-    "EventName": "ls_l1_d_tlb_miss.tlb_reload_2m_l2_miss",
-    "EventCode": "0x45",
-    "BriefDescription": "L1 DTLB Miss of a page of 2M size.",
-    "PublicDescription": "L1 DTLB Miss of a page of 2M size.",
-    "UMask": "0x40"
-  },
-  {
-    "EventName": "ls_l1_d_tlb_miss.tlb_reload_32k_l2_miss",
-    "EventCode": "0x45",
-    "BriefDescription": "L1 DTLB Miss of a page of 32K size.",
-    "PublicDescription": "L1 DTLB Miss of a page of 32K size.",
-    "UMask": "0x20"
-  },
-  {
-    "EventName": "ls_l1_d_tlb_miss.tlb_reload_4k_l2_miss",
-    "EventCode": "0x45",
-    "BriefDescription": "L1 DTLB Miss of a page of 4K size.",
-    "PublicDescription": "L1 DTLB Miss of a page of 4K size.",
-    "UMask": "0x10"
-  },
-  {
-    "EventName": "ls_l1_d_tlb_miss.tlb_reload_1g_l2_hit",
-    "EventCode": "0x45",
-    "BriefDescription": "L1 DTLB Reload of a page of 1G size.",
-    "PublicDescription": "L1 DTLB Reload of a page of 1G size.",
-    "UMask": "0x8"
-  },
-  {
-    "EventName": "ls_l1_d_tlb_miss.tlb_reload_2m_l2_hit",
-    "EventCode": "0x45",
-    "BriefDescription": "L1 DTLB Reload of a page of 2M size.",
-    "PublicDescription": "L1 DTLB Reload of a page of 2M size.",
-    "UMask": "0x4"
-  },
-  {
-    "EventName": "ls_l1_d_tlb_miss.tlb_reload_32k_l2_hit",
-    "EventCode": "0x45",
-    "BriefDescription": "L1 DTLB Reload of a page of 32K size.",
-    "PublicDescription": "L1 DTLB Reload of a page of 32K size.",
-    "UMask": "0x2"
-  },
-  {
-    "EventName": "ls_l1_d_tlb_miss.tlb_reload_4k_l2_hit",
-    "EventCode": "0x45",
-    "BriefDescription": "L1 DTLB Reload of a page of 4K size.",
-    "PublicDescription": "L1 DTLB Reload of a page of 4K size.",
-    "UMask": "0x1"
-  },
-  {
-    "EventName": "ls_tablewalker.perf_mon_tablewalk_alloc_iside",
-    "EventCode": "0x46",
-    "BriefDescription": "Tablewalker allocation.",
-    "PublicDescription": "Tablewalker allocation.",
-    "UMask": "0xc"
-  },
-  {
-    "EventName": "ls_tablewalker.perf_mon_tablewalk_alloc_dside",
-    "EventCode": "0x46",
-    "BriefDescription": "Tablewalker allocation.",
-    "PublicDescription": "Tablewalker allocation.",
-    "UMask": "0x3"
-  },
-  {
-    "EventName": "ls_misal_accesses",
-    "EventCode": "0x47",
-    "BriefDescription": "Misaligned loads."
-  },
-  {
-    "EventName": "ls_pref_instr_disp.prefetch_nta",
-    "EventCode": "0x4b",
-    "BriefDescription": "Software Prefetch Instructions (PREFETCHNTA instruction) Dispatched.",
-    "PublicDescription": "Software Prefetch Instructions (PREFETCHNTA instruction) Dispatched.",
-    "UMask": "0x4"
-  },
-  {
-    "EventName": "ls_pref_instr_disp.store_prefetch_w",
-    "EventCode": "0x4b",
-    "BriefDescription": "Software Prefetch Instructions (3DNow PREFETCHW instruction) Dispatched.",
-    "PublicDescription": "Software Prefetch Instructions (3DNow PREFETCHW instruction) Dispatched.",
-    "UMask": "0x2"
-  },
-  {
-    "EventName": "ls_pref_instr_disp.load_prefetch_w",
-    "EventCode": "0x4b",
-    "BriefDescription": "Prefetch, Prefetch_T0_T1_T2.",
-    "PublicDescription": "Software Prefetch Instructions Dispatched. Prefetch, Prefetch_T0_T1_T2.",
-    "UMask": "0x1"
-  },
-  {
-    "EventName": "ls_inef_sw_pref.mab_mch_cnt",
-    "EventCode": "0x52",
-    "BriefDescription": "The number of software prefetches that did not fetch data outside of the processor core.",
-    "PublicDescription": "The number of software prefetches that did not fetch data outside of the processor core.",
-    "UMask": "0x2"
-  },
-  {
-    "EventName": "ls_inef_sw_pref.data_pipe_sw_pf_dc_hit",
-    "EventCode": "0x52",
-    "BriefDescription": "The number of software prefetches that did not fetch data outside of the processor core.",
-    "PublicDescription": "The number of software prefetches that did not fetch data outside of the processor core.",
-    "UMask": "0x1"
-  },
-  {
-    "EventName": "ls_not_halted_cyc",
-    "EventCode": "0x76",
-    "BriefDescription": "Cycles not in Halt."
-  }
-]
diff --git a/tools/perf/pmu-events/arch/x86/amdfam17h/other.json b/tools/perf/pmu-events/arch/x86/amdfam17h/other.json
deleted file mode 100644
index b26a00d..0000000
--- a/tools/perf/pmu-events/arch/x86/amdfam17h/other.json
+++ /dev/null
@@ -1,65 +0,0 @@
-[
-  {
-    "EventName": "ic_oc_mode_switch.oc_ic_mode_switch",
-    "EventCode": "0x28a",
-    "BriefDescription": "OC to IC mode switch.",
-    "PublicDescription": "OC Mode Switch. OC to IC mode switch.",
-    "UMask": "0x2"
-  },
-  {
-    "EventName": "ic_oc_mode_switch.ic_oc_mode_switch",
-    "EventCode": "0x28a",
-    "BriefDescription": "IC to OC mode switch.",
-    "PublicDescription": "OC Mode Switch. IC to OC mode switch.",
-    "UMask": "0x1"
-  },
-  {
-    "EventName": "de_dis_dispatch_token_stalls0.retire_token_stall",
-    "EventCode": "0xaf",
-    "BriefDescription": "RETIRE Tokens unavailable.",
-    "PublicDescription": "Cycles where a dispatch group is valid but does not get dispatched due to a token stall. RETIRE Tokens unavailable.",
-    "UMask": "0x40"
-  },
-  {
-    "EventName": "de_dis_dispatch_token_stalls0.agsq_token_stall",
-    "EventCode": "0xaf",
-    "BriefDescription": "AGSQ Tokens unavailable.",
-    "PublicDescription": "Cycles where a dispatch group is valid but does not get dispatched due to a token stall. AGSQ Tokens unavailable.",
-    "UMask": "0x20"
-  },
-  {
-    "EventName": "de_dis_dispatch_token_stalls0.alu_token_stall",
-    "EventCode": "0xaf",
-    "BriefDescription": "ALU tokens total unavailable.",
-    "PublicDescription": "Cycles where a dispatch group is valid but does not get dispatched due to a token stall. ALU tokens total unavailable.",
-    "UMask": "0x10"
-  },
-  {
-    "EventName": "de_dis_dispatch_token_stalls0.alsq3_0_token_stall",
-    "EventCode": "0xaf",
-    "BriefDescription": "Cycles where a dispatch group is valid but does not get dispatched due to a token stall.",
-    "PublicDescription": "Cycles where a dispatch group is valid but does not get dispatched due to a token stall.",
-    "UMask": "0x8"
-  },
-  {
-    "EventName": "de_dis_dispatch_token_stalls0.alsq3_token_stall",
-    "EventCode": "0xaf",
-    "BriefDescription": "ALSQ 3 Tokens unavailable.",
-    "PublicDescription": "Cycles where a dispatch group is valid but does not get dispatched due to a token stall. ALSQ 3 Tokens unavailable.",
-    "UMask": "0x4"
-  },
-  {
-    "EventName": "de_dis_dispatch_token_stalls0.alsq2_token_stall",
-    "EventCode": "0xaf",
-    "BriefDescription": "ALSQ 2 Tokens unavailable.",
-    "PublicDescription": "Cycles where a dispatch group is valid but does not get dispatched due to a token stall. ALSQ 2 Tokens unavailable.",
-    "UMask": "0x2"
-  },
-  {
-    "EventName": "de_dis_dispatch_token_stalls0.alsq1_token_stall",
-    "EventCode": "0xaf",
-    "BriefDescription": "ALSQ 1 Tokens unavailable.",
-    "PublicDescription": "Cycles where a dispatch group is valid but does not get dispatched due to a token stall. ALSQ 1 Tokens unavailable.",
-    "UMask": "0x1"
-  }
-]
diff --git a/tools/perf/pmu-events/arch/x86/amdzen1/branch.json b/tools/perf/pmu-events/arch/x86/amdzen1/branch.json
new file mode 100644
index 0000000..a9943ee
--- /dev/null
+++ b/tools/perf/pmu-events/arch/x86/amdzen1/branch.json
@@ -0,0 +1,23 @@
+[
+  {
+    "EventName": "bp_l1_btb_correct",
+    "EventCode": "0x8a",
+    "BriefDescription": "L1 BTB Correction."
+  },
+  {
+    "EventName": "bp_l2_btb_correct",
+    "EventCode": "0x8b",
+    "BriefDescription": "L2 BTB Correction."
+  },
+  {
+    "EventName": "bp_dyn_ind_pred",
+    "EventCode": "0x8e",
+    "BriefDescription": "Dynamic Indirect Predictions.",
+    "PublicDescription": "Indirect Branch Prediction for potential multi-target branch (speculative)."
+  },
+  {
+    "EventName": "bp_de_redirect",
+    "EventCode": "0x91",
+    "BriefDescription": "Decoder Overrides Existing Branch Prediction (speculative)."
+  }
+]
diff --git a/tools/perf/pmu-events/arch/x86/amdzen1/cache.json b/tools/perf/pmu-events/arch/x86/amdzen1/cache.json
new file mode 100644
index 0000000..404d4c5
--- /dev/null
+++ b/tools/perf/pmu-events/arch/x86/amdzen1/cache.json
@@ -0,0 +1,294 @@
+[
+  {
+    "EventName": "ic_fw32",
+    "EventCode": "0x80",
+    "BriefDescription": "The number of 32B fetch windows transferred from IC pipe to DE instruction decoder (includes non-cacheable and cacheable fill responses)."
+  },
+  {
+    "EventName": "ic_fw32_miss",
+    "EventCode": "0x81",
+    "BriefDescription": "The number of 32B fetch windows tried to read the L1 IC and missed in the full tag."
+  },
+  {
+    "EventName": "ic_cache_fill_l2",
+    "EventCode": "0x82",
+    "BriefDescription": "The number of 64 byte instruction cache line was fulfilled from the L2 cache."
+  },
+  {
+    "EventName": "ic_cache_fill_sys",
+    "EventCode": "0x83",
+    "BriefDescription": "The number of 64 byte instruction cache line fulfilled from system memory or another cache."
+  },
+  {
+    "EventName": "bp_l1_tlb_miss_l2_hit",
+    "EventCode": "0x84",
+    "BriefDescription": "The number of instruction fetches that miss in the L1 ITLB but hit in the L2 ITLB."
+  },
+  {
+    "EventName": "bp_l1_tlb_miss_l2_miss",
+    "EventCode": "0x85",
+    "BriefDescription": "The number of instruction fetches that miss in both the L1 and L2 TLBs."
+  },
+  {
+    "EventName": "bp_snp_re_sync",
+    "EventCode": "0x86",
+    "BriefDescription": "The number of pipeline restarts caused by invalidating probes that hit on the instruction stream currently being executed. This would happen if the active instruction stream was being modified by another processor in an MP system - typically a highly unlikely event."
+  },
+  {
+    "EventName": "ic_fetch_stall.ic_stall_any",
+    "EventCode": "0x87",
+    "BriefDescription": "Instruction Pipe Stall. IC pipe was stalled during this clock cycle for any reason (nothing valid in pipe ICM1).",
+    "UMask": "0x4"
+  },
+  {
+    "EventName": "ic_fetch_stall.ic_stall_dq_empty",
+    "EventCode": "0x87",
+    "BriefDescription": "Instruction Pipe Stall. IC pipe was stalled during this clock cycle (including IC to OC fetches) due to DQ empty.",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "ic_fetch_stall.ic_stall_back_pressure",
+    "EventCode": "0x87",
+    "BriefDescription": "Instruction Pipe Stall. IC pipe was stalled during this clock cycle (including IC to OC fetches) due to back-pressure.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "ic_cache_inval.l2_invalidating_probe",
+    "EventCode": "0x8c",
+    "BriefDescription": "IC line invalidated due to L2 invalidating probe (external or LS). The number of instruction cache lines invalidated. A non-SMC event is CMC (cross modifying code), either from the other thread of the core or another core.",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "ic_cache_inval.fill_invalidated",
+    "EventCode": "0x8c",
+    "BriefDescription": "IC line invalidated due to overwriting fill response. The number of instruction cache lines invalidated. A non-SMC event is CMC (cross modifying code), either from the other thread of the core or another core.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "bp_tlb_rel",
+    "EventCode": "0x99",
+    "BriefDescription": "The number of ITLB reload requests."
+  },
+  {
+    "EventName": "l2_request_g1.rd_blk_l",
+    "EventCode": "0x60",
+    "BriefDescription": "All L2 Cache Requests (Breakdown 1 - Common). Data cache reads (including hardware and software prefetch).",
+    "UMask": "0x80"
+  },
+  {
+    "EventName": "l2_request_g1.rd_blk_x",
+    "EventCode": "0x60",
+    "BriefDescription": "All L2 Cache Requests (Breakdown 1 - Common). Data cache stores.",
+    "UMask": "0x40"
+  },
+  {
+    "EventName": "l2_request_g1.ls_rd_blk_c_s",
+    "EventCode": "0x60",
+    "BriefDescription": "All L2 Cache Requests (Breakdown 1 - Common). Data cache shared reads.",
+    "UMask": "0x20"
+  },
+  {
+    "EventName": "l2_request_g1.cacheable_ic_read",
+    "EventCode": "0x60",
+    "BriefDescription": "All L2 Cache Requests (Breakdown 1 - Common). Instruction cache reads.",
+    "UMask": "0x10"
+  },
+  {
+    "EventName": "l2_request_g1.change_to_x",
+    "EventCode": "0x60",
+    "BriefDescription": "All L2 Cache Requests (Breakdown 1 - Common). Data cache state change requests. Request change to writable, check L2 for current state.",
+    "UMask": "0x8"
+  },
+  {
+    "EventName": "l2_request_g1.prefetch_l2_cmd",
+    "EventCode": "0x60",
+    "BriefDescription": "All L2 Cache Requests (Breakdown 1 - Common). PrefetchL2Cmd.",
+    "UMask": "0x4"
+  },
+  {
+    "EventName": "l2_request_g1.l2_hw_pf",
+    "EventCode": "0x60",
+    "BriefDescription": "All L2 Cache Requests (Breakdown 1 - Common). L2 Prefetcher. All prefetches accepted by L2 pipeline, hit or miss. Types of PF and L2 hit/miss broken out in a separate perfmon event.",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "l2_request_g1.group2",
+    "EventCode": "0x60",
+    "BriefDescription": "Miscellaneous events covered in more detail by l2_request_g2 (PMCx061).",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "l2_request_g2.group1",
+    "EventCode": "0x61",
+    "BriefDescription": "Miscellaneous events covered in more detail by l2_request_g1 (PMCx060).",
+    "UMask": "0x80"
+  },
+  {
+    "EventName": "l2_request_g2.ls_rd_sized",
+    "EventCode": "0x61",
+    "BriefDescription": "All L2 Cache Requests (Breakdown 2 - Rare). Data cache read sized.",
+    "UMask": "0x40"
+  },
+  {
+    "EventName": "l2_request_g2.ls_rd_sized_nc",
+    "EventCode": "0x61",
+    "BriefDescription": "All L2 Cache Requests (Breakdown 2 - Rare). Data cache read sized non-cacheable.",
+    "UMask": "0x20"
+  },
+  {
+    "EventName": "l2_request_g2.ic_rd_sized",
+    "EventCode": "0x61",
+    "BriefDescription": "All L2 Cache Requests (Breakdown 2 - Rare). Instruction cache read sized.",
+    "UMask": "0x10"
+  },
+  {
+    "EventName": "l2_request_g2.ic_rd_sized_nc",
+    "EventCode": "0x61",
+    "BriefDescription": "All L2 Cache Requests (Breakdown 2 - Rare). Instruction cache read sized non-cacheable.",
+    "UMask": "0x8"
+  },
+  {
+    "EventName": "l2_request_g2.smc_inval",
+    "EventCode": "0x61",
+    "BriefDescription": "All L2 Cache Requests (Breakdown 2 - Rare). Self-modifying code invalidates.",
+    "UMask": "0x4"
+  },
+  {
+    "EventName": "l2_request_g2.bus_locks_originator",
+    "EventCode": "0x61",
+    "BriefDescription": "All L2 Cache Requests (Breakdown 2 - Rare). Bus locks.",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "l2_request_g2.bus_locks_responses",
+    "EventCode": "0x61",
+    "BriefDescription": "All L2 Cache Requests (Breakdown 2 - Rare). Bus lock response.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "l2_latency.l2_cycles_waiting_on_fills",
+    "EventCode": "0x62",
+    "BriefDescription": "Total cycles spent waiting for L2 fills to complete from L3 or memory, divided by four. Event counts are for both threads. To calculate average latency, the number of fills from both threads must be used.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "l2_wcb_req.wcb_write",
+    "EventCode": "0x63",
+    "BriefDescription": "LS to L2 WCB write requests. LS (Load/Store unit) to L2 WCB (Write Combining Buffer) write requests.",
+    "UMask": "0x40"
+  },
+  {
+    "EventName": "l2_wcb_req.wcb_close",
+    "EventCode": "0x63",
+    "BriefDescription": "LS to L2 WCB close requests. LS (Load/Store unit) to L2 WCB (Write Combining Buffer) close requests.",
+    "UMask": "0x20"
+  },
+  {
+    "EventName": "l2_wcb_req.zero_byte_store",
+    "EventCode": "0x63",
+    "BriefDescription": "LS to L2 WCB zero byte store requests. LS (Load/Store unit) to L2 WCB (Write Combining Buffer) zero byte store requests.",
+    "UMask": "0x4"
+  },
+  {
+    "EventName": "l2_wcb_req.cl_zero",
+    "EventCode": "0x63",
+    "BriefDescription": "LS to L2 WCB cache line zeroing requests. LS (Load/Store unit) to L2 WCB (Write Combining Buffer) cache line zeroing requests.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "l2_cache_req_stat.ls_rd_blk_cs",
+    "EventCode": "0x64",
+    "BriefDescription": "Core to L2 cacheable request access status (not including L2 Prefetch). Data cache shared read hit in L2",
+    "UMask": "0x80"
+  },
+  {
+    "EventName": "l2_cache_req_stat.ls_rd_blk_l_hit_x",
+    "EventCode": "0x64",
+    "BriefDescription": "Core to L2 cacheable request access status (not including L2 Prefetch). Data cache read hit in L2.",
+    "UMask": "0x40"
+  },
+  {
+    "EventName": "l2_cache_req_stat.ls_rd_blk_l_hit_s",
+    "EventCode": "0x64",
+    "BriefDescription": "Core to L2 cacheable request access status (not including L2 Prefetch). Data cache read hit on shared line in L2.",
+    "UMask": "0x20"
+  },
+  {
+    "EventName": "l2_cache_req_stat.ls_rd_blk_x",
+    "EventCode": "0x64",
+    "BriefDescription": "Core to L2 cacheable request access status (not including L2 Prefetch). Data cache store or state change hit in L2.",
+    "UMask": "0x10"
+  },
+  {
+    "EventName": "l2_cache_req_stat.ls_rd_blk_c",
+    "EventCode": "0x64",
+    "BriefDescription": "Core to L2 cacheable request access status (not including L2 Prefetch). Data cache request miss in L2 (all types).",
+    "UMask": "0x8"
+  },
+  {
+    "EventName": "l2_cache_req_stat.ic_fill_hit_x",
+    "EventCode": "0x64",
+    "BriefDescription": "Core to L2 cacheable request access status (not including L2 Prefetch). Instruction cache hit modifiable line in L2.",
+    "UMask": "0x4"
+  },
+  {
+    "EventName": "l2_cache_req_stat.ic_fill_hit_s",
+    "EventCode": "0x64",
+    "BriefDescription": "Core to L2 cacheable request access status (not including L2 Prefetch). Instruction cache hit clean line in L2.",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "l2_cache_req_stat.ic_fill_miss",
+    "EventCode": "0x64",
+    "BriefDescription": "Core to L2 cacheable request access status (not including L2 Prefetch). Instruction cache request miss in L2.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "l2_fill_pending.l2_fill_busy",
+    "EventCode": "0x6d",
+    "BriefDescription": "Cycles with fill pending from L2. Total cycles spent with one or more fill requests in flight from L2.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "l3_request_g1.caching_l3_cache_accesses",
+    "EventCode": "0x01",
+    "BriefDescription": "Caching: L3 cache accesses",
+    "UMask": "0x80",
+    "Unit": "L3PMC"
+  },
+  {
+    "EventName": "l3_lookup_state.all_l3_req_typs",
+    "EventCode": "0x04",
+    "BriefDescription": "All L3 Request Types",
+    "UMask": "0xff",
+    "Unit": "L3PMC"
+  },
+  {
+    "EventName": "l3_comb_clstr_state.other_l3_miss_typs",
+    "EventCode": "0x06",
+    "BriefDescription": "Other L3 Miss Request Types",
+    "UMask": "0xfe",
+    "Unit": "L3PMC"
+  },
+  {
+    "EventName": "l3_comb_clstr_state.request_miss",
+    "EventCode": "0x06",
+    "BriefDescription": "L3 cache misses",
+    "UMask": "0x01",
+    "Unit": "L3PMC"
+  },
+  {
+    "EventName": "xi_sys_fill_latency",
+    "EventCode": "0x90",
+    "BriefDescription": "L3 Cache Miss Latency. Total cycles for all transactions divided by 16. Ignores SliceMask and ThreadMask.",
+    "UMask": "0x00",
+    "Unit": "L3PMC"
+  },
+  {
+    "EventName": "xi_ccx_sdp_req1.all_l3_miss_req_typs",
+    "EventCode": "0x9a",
+    "BriefDescription": "All L3 Miss Request Types. Ignores SliceMask and ThreadMask.",
+    "UMask": "0x3f",
+    "Unit": "L3PMC"
+  }
+]
diff --git a/tools/perf/pmu-events/arch/x86/amdzen1/core.json b/tools/perf/pmu-events/arch/x86/amdzen1/core.json
new file mode 100644
index 0000000..7e1aa82
--- /dev/null
+++ b/tools/perf/pmu-events/arch/x86/amdzen1/core.json
@@ -0,0 +1,125 @@
+[
+  {
+    "EventName": "ex_ret_instr",
+    "EventCode": "0xc0",
+    "BriefDescription": "Retired Instructions."
+  },
+  {
+    "EventName": "ex_ret_cops",
+    "EventCode": "0xc1",
+    "BriefDescription": "Retired Uops.",
+    "PublicDescription": "The number of uOps retired. This includes all processor activity (instructions, exceptions, interrupts, microcode assists, etc.). The number of events logged per cycle can vary from 0 to 4."
+  },
+  {
+    "EventName": "ex_ret_brn",
+    "EventCode": "0xc2",
+    "BriefDescription": "Retired Branch Instructions.",
+    "PublicDescription": "The number of branch instructions retired. This includes all types of architectural control flow changes, including exceptions and interrupts."
+  },
+  {
+    "EventName": "ex_ret_brn_misp",
+    "EventCode": "0xc3",
+    "BriefDescription": "Retired Branch Instructions Mispredicted.",
+    "PublicDescription": "The number of branch instructions retired, of any type, that were not correctly predicted. This includes those for which prediction is not attempted (far control transfers, exceptions and interrupts)."
+  },
+  {
+    "EventName": "ex_ret_brn_tkn",
+    "EventCode": "0xc4",
+    "BriefDescription": "Retired Taken Branch Instructions.",
+    "PublicDescription": "The number of taken branches that were retired. This includes all types of architectural control flow changes, including exceptions and interrupts."
+  },
+  {
+    "EventName": "ex_ret_brn_tkn_misp",
+    "EventCode": "0xc5",
+    "BriefDescription": "Retired Taken Branch Instructions Mispredicted.",
+    "PublicDescription": "The number of retired taken branch instructions that were mispredicted."
+  },
+  {
+    "EventName": "ex_ret_brn_far",
+    "EventCode": "0xc6",
+    "BriefDescription": "Retired Far Control Transfers.",
+    "PublicDescription": "The number of far control transfers retired including far call/jump/return, IRET, SYSCALL and SYSRET, plus exceptions and interrupts. Far control transfers are not subject to branch prediction."
+  },
+  {
+    "EventName": "ex_ret_brn_resync",
+    "EventCode": "0xc7",
+    "BriefDescription": "Retired Branch Resyncs.",
+    "PublicDescription": "The number of resync branches. These reflect pipeline restarts due to certain microcode assists and events such as writes to the active instruction stream, among other things. Each occurrence reflects a restart penalty similar to a branch mispredict. This is relatively rare."
+  },
+  {
+    "EventName": "ex_ret_near_ret",
+    "EventCode": "0xc8",
+    "BriefDescription": "Retired Near Returns.",
+    "PublicDescription": "The number of near return instructions (RET or RET Iw) retired."
+  },
+  {
+    "EventName": "ex_ret_near_ret_mispred",
+    "EventCode": "0xc9",
+    "BriefDescription": "Retired Near Returns Mispredicted.",
+    "PublicDescription": "The number of near returns retired that were not correctly predicted by the return address predictor. Each such mispredict incurs the same penalty as a mispredicted conditional branch instruction."
+  },
+  {
+    "EventName": "ex_ret_brn_ind_misp",
+    "EventCode": "0xca",
+    "BriefDescription": "Retired Indirect Branch Instructions Mispredicted.",
+  },
+  {
+    "EventName": "ex_ret_mmx_fp_instr.sse_instr",
+    "EventCode": "0xcb",
+    "BriefDescription": "SSE instructions (SSE, SSE2, SSE3, SSSE3, SSE4A, SSE41, SSE42, AVX).",
+    "PublicDescription": "The number of MMX, SSE or x87 instructions retired. The UnitMask allows the selection of the individual classes of instructions as given in the table. Each increment represents one complete instruction. Since this event includes non-numeric instructions it is not suitable for measuring MFLOPS. SSE instructions (SSE, SSE2, SSE3, SSSE3, SSE4A, SSE41, SSE42, AVX).",
+    "UMask": "0x4"
+  },
+  {
+    "EventName": "ex_ret_mmx_fp_instr.mmx_instr",
+    "EventCode": "0xcb",
+    "BriefDescription": "MMX instructions.",
+    "PublicDescription": "The number of MMX, SSE or x87 instructions retired. The UnitMask allows the selection of the individual classes of instructions as given in the table. Each increment represents one complete instruction. Since this event includes non-numeric instructions it is not suitable for measuring MFLOPS. MMX instructions.",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "ex_ret_mmx_fp_instr.x87_instr",
+    "EventCode": "0xcb",
+    "BriefDescription": "x87 instructions.",
+    "PublicDescription": "The number of MMX, SSE or x87 instructions retired. The UnitMask allows the selection of the individual classes of instructions as given in the table. Each increment represents one complete instruction. Since this event includes non-numeric instructions it is not suitable for measuring MFLOPS. x87 instructions.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "ex_ret_cond",
+    "EventCode": "0xd1",
+    "BriefDescription": "Retired Conditional Branch Instructions."
+  },
+  {
+    "EventName": "ex_div_busy",
+    "EventCode": "0xd3",
+    "BriefDescription": "Div Cycles Busy count."
+  },
+  {
+    "EventName": "ex_div_count",
+    "EventCode": "0xd4",
+    "BriefDescription": "Div Op Count."
+  },
+  {
+    "EventName": "ex_tagged_ibs_ops.ibs_count_rollover",
+    "EventCode": "0x1cf",
+    "BriefDescription": "Tagged IBS Ops. Number of times an op could not be tagged by IBS because of a previous tagged op that has not retired.",
+    "UMask": "0x4"
+  },
+  {
+    "EventName": "ex_tagged_ibs_ops.ibs_tagged_ops_ret",
+    "EventCode": "0x1cf",
+    "BriefDescription": "Tagged IBS Ops. Number of Ops tagged by IBS that retired.",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "ex_tagged_ibs_ops.ibs_tagged_ops",
+    "EventCode": "0x1cf",
+    "BriefDescription": "Tagged IBS Ops. Number of Ops tagged by IBS.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "ex_ret_fus_brnch_inst",
+    "EventCode": "0x1d0",
+    "BriefDescription": "The number of fused retired branch instructions retired per cycle. The number of events logged per cycle can vary from 0 to 3."
+  }
+]
diff --git a/tools/perf/pmu-events/arch/x86/amdzen1/floating-point.json b/tools/perf/pmu-events/arch/x86/amdzen1/floating-point.json
new file mode 100644
index 0000000..a35542b
--- /dev/null
+++ b/tools/perf/pmu-events/arch/x86/amdzen1/floating-point.json
@@ -0,0 +1,224 @@
+[
+  {
+    "EventName": "fpu_pipe_assignment.dual",
+    "EventCode": "0x00",
+    "BriefDescription": "Total number multi-pipe uOps assigned to all pipes.",
+    "PublicDescription": "The number of operations (uOps) and dual-pipe uOps dispatched to each of the 4 FPU execution pipelines. This event reflects how busy the FPU pipelines are and may be used for workload characterization. This includes all operations performed by x87, MMX, and SSE instructions, including moves. Each increment represents a one- cycle dispatch event. This event is a speculative event. Since this event includes non-numeric operations it is not suitable for measuring MFLOPS. Total number multi-pipe uOps assigned to all pipes.",
+    "UMask": "0xf0"
+  },
+  {
+    "EventName": "fpu_pipe_assignment.dual3",
+    "EventCode": "0x00",
+    "BriefDescription": "Total number multi-pipe uOps assigned to pipe 3.",
+    "PublicDescription": "The number of operations (uOps) and dual-pipe uOps dispatched to each of the 4 FPU execution pipelines. This event reflects how busy the FPU pipelines are and may be used for workload characterization. This includes all operations performed by x87, MMX, and SSE instructions, including moves. Each increment represents a one- cycle dispatch event. This event is a speculative event. Since this event includes non-numeric operations it is not suitable for measuring MFLOPS. Total number multi-pipe uOps assigned to pipe 3.",
+    "UMask": "0x80"
+  },
+  {
+    "EventName": "fpu_pipe_assignment.dual2",
+    "EventCode": "0x00",
+    "BriefDescription": "Total number multi-pipe uOps assigned to pipe 2.",
+    "PublicDescription": "The number of operations (uOps) and dual-pipe uOps dispatched to each of the 4 FPU execution pipelines. This event reflects how busy the FPU pipelines are and may be used for workload characterization. This includes all operations performed by x87, MMX, and SSE instructions, including moves. Each increment represents a one- cycle dispatch event. This event is a speculative event. Since this event includes non-numeric operations it is not suitable for measuring MFLOPS. Total number multi-pipe uOps assigned to pipe 2.",
+    "UMask": "0x40"
+  },
+  {
+    "EventName": "fpu_pipe_assignment.dual1",
+    "EventCode": "0x00",
+    "BriefDescription": "Total number multi-pipe uOps assigned to pipe 1.",
+    "PublicDescription": "The number of operations (uOps) and dual-pipe uOps dispatched to each of the 4 FPU execution pipelines. This event reflects how busy the FPU pipelines are and may be used for workload characterization. This includes all operations performed by x87, MMX, and SSE instructions, including moves. Each increment represents a one- cycle dispatch event. This event is a speculative event. Since this event includes non-numeric operations it is not suitable for measuring MFLOPS. Total number multi-pipe uOps assigned to pipe 1.",
+    "UMask": "0x20"
+  },
+  {
+    "EventName": "fpu_pipe_assignment.dual0",
+    "EventCode": "0x00",
+    "BriefDescription": "Total number multi-pipe uOps assigned to pipe 0.",
+    "PublicDescription": "The number of operations (uOps) and dual-pipe uOps dispatched to each of the 4 FPU execution pipelines. This event reflects how busy the FPU pipelines are and may be used for workload characterization. This includes all operations performed by x87, MMX, and SSE instructions, including moves. Each increment represents a one- cycle dispatch event. This event is a speculative event. Since this event includes non-numeric operations it is not suitable for measuring MFLOPS. Total number multi-pipe uOps assigned to pipe 0.",
+    "UMask": "0x10"
+  },
+  {
+    "EventName": "fpu_pipe_assignment.total",
+    "EventCode": "0x00",
+    "BriefDescription": "Total number uOps assigned to all fpu pipes.",
+    "PublicDescription": "The number of operations (uOps) and dual-pipe uOps dispatched to each of the 4 FPU execution pipelines. This event reflects how busy the FPU pipelines are and may be used for workload characterization. This includes all operations performed by x87, MMX, and SSE instructions, including moves. Each increment represents a one- cycle dispatch event. This event is a speculative event. Since this event includes non-numeric operations it is not suitable for measuring MFLOPS. Total number uOps assigned to all pipes.",
+    "UMask": "0xf"
+  },
+  {
+    "EventName": "fpu_pipe_assignment.total3",
+    "EventCode": "0x00",
+    "BriefDescription": "Total number of fp uOps on pipe 3.",
+    "PublicDescription": "The number of operations (uOps) dispatched to each of the 4 FPU execution pipelines. This event reflects how busy the FPU pipelines are and may be used for workload characterization. This includes all operations performed by x87, MMX, and SSE instructions, including moves. Each increment represents a one-cycle dispatch event. This event is a speculative event. Since this event includes non-numeric operations it is not suitable for measuring MFLOPS. Total number uOps assigned to pipe 3.",
+    "UMask": "0x8"
+  },
+  {
+    "EventName": "fpu_pipe_assignment.total2",
+    "EventCode": "0x00",
+    "BriefDescription": "Total number of fp uOps on pipe 2.",
+    "PublicDescription": "The number of operations (uOps) dispatched to each of the 4 FPU execution pipelines. This event reflects how busy the FPU pipelines are and may be used for workload characterization. This includes all operations performed by x87, MMX, and SSE instructions, including moves. Each increment represents a one- cycle dispatch event. This event is a speculative event. Since this event includes non-numeric operations it is not suitable for measuring MFLOPS. Total number uOps assigned to pipe 2.",
+    "UMask": "0x4"
+  },
+  {
+    "EventName": "fpu_pipe_assignment.total1",
+    "EventCode": "0x00",
+    "BriefDescription": "Total number of fp uOps on pipe 1.",
+    "PublicDescription": "The number of operations (uOps) dispatched to each of the 4 FPU execution pipelines. This event reflects how busy the FPU pipelines are and may be used for workload characterization. This includes all operations performed by x87, MMX, and SSE instructions, including moves. Each increment represents a one- cycle dispatch event. This event is a speculative event. Since this event includes non-numeric operations it is not suitable for measuring MFLOPS. Total number uOps assigned to pipe 1.",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "fpu_pipe_assignment.total0",
+    "EventCode": "0x00",
+    "BriefDescription": "Total number of fp uOps  on pipe 0.",
+    "PublicDescription": "The number of operations (uOps) dispatched to each of the 4 FPU execution pipelines. This event reflects how busy the FPU pipelines are and may be used for workload characterization. This includes all operations performed by x87, MMX, and SSE instructions, including moves. Each increment represents a one- cycle dispatch event. This event is a speculative event. Since this event includes non-numeric operations it is not suitable for measuring MFLOPS. Total number uOps assigned to pipe 0.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "fp_sched_empty",
+    "EventCode": "0x01",
+    "BriefDescription": "This is a speculative event. The number of cycles in which the FPU scheduler is empty. Note that some Ops like FP loads bypass the scheduler."
+  },
+  {
+    "EventName": "fp_retx87_fp_ops.all",
+    "EventCode": "0x02",
+    "BriefDescription": "All Ops.",
+    "PublicDescription": "The number of x87 floating-point Ops that have retired. The number of events logged per cycle can vary from 0 to 8.",
+    "UMask": "0x7"
+  },
+  {
+    "EventName": "fp_retx87_fp_ops.div_sqr_r_ops",
+    "EventCode": "0x02",
+    "BriefDescription": "Divide and square root Ops.",
+    "PublicDescription": "The number of x87 floating-point Ops that have retired. The number of events logged per cycle can vary from 0 to 8. Divide and square root Ops.",
+    "UMask": "0x4"
+  },
+  {
+    "EventName": "fp_retx87_fp_ops.mul_ops",
+    "EventCode": "0x02",
+    "BriefDescription": "Multiply Ops.",
+    "PublicDescription": "The number of x87 floating-point Ops that have retired. The number of events logged per cycle can vary from 0 to 8. Multiply Ops.",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "fp_retx87_fp_ops.add_sub_ops",
+    "EventCode": "0x02",
+    "BriefDescription": "Add/subtract Ops.",
+    "PublicDescription": "The number of x87 floating-point Ops that have retired. The number of events logged per cycle can vary from 0 to 8. Add/subtract Ops.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "fp_ret_sse_avx_ops.all",
+    "EventCode": "0x03",
+    "BriefDescription": "All FLOPS.",
+    "PublicDescription": "This is a retire-based event. The number of retired SSE/AVX FLOPS. The number of events logged per cycle can vary from 0 to 64. This event can count above 15.",
+    "UMask": "0xff"
+  },
+  {
+    "EventName": "fp_ret_sse_avx_ops.dp_mult_add_flops",
+    "EventCode": "0x03",
+    "BriefDescription": "Double precision multiply-add FLOPS. Multiply-add counts as 2 FLOPS.",
+    "PublicDescription": "This is a retire-based event. The number of retired SSE/AVX FLOPS. The number of events logged per cycle can vary from 0 to 64. This event can count above 15. Double precision multiply-add FLOPS. Multiply-add counts as 2 FLOPS.",
+    "UMask": "0x80"
+  },
+  {
+    "EventName": "fp_ret_sse_avx_ops.dp_div_flops",
+    "EventCode": "0x03",
+    "BriefDescription": "Double precision divide/square root FLOPS.",
+    "PublicDescription": "This is a retire-based event. The number of retired SSE/AVX FLOPS. The number of events logged per cycle can vary from 0 to 64. This event can count above 15. Double precision divide/square root FLOPS.",
+    "UMask": "0x40"
+  },
+  {
+    "EventName": "fp_ret_sse_avx_ops.dp_mult_flops",
+    "EventCode": "0x03",
+    "BriefDescription": "Double precision multiply FLOPS.",
+    "PublicDescription": "This is a retire-based event. The number of retired SSE/AVX FLOPS. The number of events logged per cycle can vary from 0 to 64. This event can count above 15. Double precision multiply FLOPS.",
+    "UMask": "0x20"
+  },
+  {
+    "EventName": "fp_ret_sse_avx_ops.dp_add_sub_flops",
+    "EventCode": "0x03",
+    "BriefDescription": "Double precision add/subtract FLOPS.",
+    "PublicDescription": "This is a retire-based event. The number of retired SSE/AVX FLOPS. The number of events logged per cycle can vary from 0 to 64. This event can count above 15. Double precision add/subtract FLOPS.",
+    "UMask": "0x10"
+  },
+  {
+    "EventName": "fp_ret_sse_avx_ops.sp_mult_add_flops",
+    "EventCode": "0x03",
+    "BriefDescription": "Single precision multiply-add FLOPS. Multiply-add counts as 2 FLOPS.",
+    "PublicDescription": "This is a retire-based event. The number of retired SSE/AVX FLOPS. The number of events logged per cycle can vary from 0 to 64. This event can count above 15. Single precision multiply-add FLOPS. Multiply-add counts as 2 FLOPS.",
+    "UMask": "0x8"
+  },
+  {
+    "EventName": "fp_ret_sse_avx_ops.sp_div_flops",
+    "EventCode": "0x03",
+    "BriefDescription": "Single-precision divide/square root FLOPS.",
+    "PublicDescription": "This is a retire-based event. The number of retired SSE/AVX FLOPS. The number of events logged per cycle can vary from 0 to 64. This event can count above 15. Single-precision divide/square root FLOPS.",
+    "UMask": "0x4"
+  },
+  {
+    "EventName": "fp_ret_sse_avx_ops.sp_mult_flops",
+    "EventCode": "0x03",
+    "BriefDescription": "Single-precision multiply FLOPS.",
+    "PublicDescription": "This is a retire-based event. The number of retired SSE/AVX FLOPS. The number of events logged per cycle can vary from 0 to 64. This event can count above 15. Single-precision multiply FLOPS.",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "fp_ret_sse_avx_ops.sp_add_sub_flops",
+    "EventCode": "0x03",
+    "BriefDescription": "Single-precision add/subtract FLOPS.",
+    "PublicDescription": "This is a retire-based event. The number of retired SSE/AVX FLOPS. The number of events logged per cycle can vary from 0 to 64. This event can count above 15. Single-precision add/subtract FLOPS.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "fp_num_mov_elim_scal_op.optimized",
+    "EventCode": "0x04",
+    "BriefDescription": "Number of Scalar Ops optimized.",
+    "PublicDescription": "This is a dispatch based speculative event, and is useful for measuring the effectiveness of the Move elimination and Scalar code optimization schemes. Number of Scalar Ops optimized.",
+    "UMask": "0x8"
+  },
+  {
+    "EventName": "fp_num_mov_elim_scal_op.opt_potential",
+    "EventCode": "0x04",
+    "BriefDescription": "Number of Ops that are candidates for optimization (have Z-bit either set or pass).",
+    "PublicDescription": "This is a dispatch based speculative event, and is useful for measuring the effectiveness of the Move elimination and Scalar code optimization schemes. Number of Ops that are candidates for optimization (have Z-bit either set or pass).",
+    "UMask": "0x4"
+  },
+  {
+    "EventName": "fp_num_mov_elim_scal_op.sse_mov_ops_elim",
+    "EventCode": "0x04",
+    "BriefDescription": "Number of SSE Move Ops eliminated.",
+    "PublicDescription": "This is a dispatch based speculative event, and is useful for measuring the effectiveness of the Move elimination and Scalar code optimization schemes. Number of SSE Move Ops eliminated.",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "fp_num_mov_elim_scal_op.sse_mov_ops",
+    "EventCode": "0x04",
+    "BriefDescription": "Number of SSE Move Ops.",
+    "PublicDescription": "This is a dispatch based speculative event, and is useful for measuring the effectiveness of the Move elimination and Scalar code optimization schemes. Number of SSE Move Ops.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "fp_retired_ser_ops.x87_ctrl_ret",
+    "EventCode": "0x05",
+    "BriefDescription": "x87 control word mispredict traps due to mispredictions in RC or PC, or changes in mask bits.",
+    "PublicDescription": "The number of serializing Ops retired. x87 control word mispredict traps due to mispredictions in RC or PC, or changes in mask bits.",
+    "UMask": "0x8"
+  },
+  {
+    "EventName": "fp_retired_ser_ops.x87_bot_ret",
+    "EventCode": "0x05",
+    "BriefDescription": "x87 bottom-executing uOps retired.",
+    "PublicDescription": "The number of serializing Ops retired. x87 bottom-executing uOps retired.",
+    "UMask": "0x4"
+  },
+  {
+    "EventName": "fp_retired_ser_ops.sse_ctrl_ret",
+    "EventCode": "0x05",
+    "BriefDescription": "SSE control word mispredict traps due to mispredictions in RC, FTZ or DAZ, or changes in mask bits.",
+    "PublicDescription": "The number of serializing Ops retired. SSE control word mispredict traps due to mispredictions in RC, FTZ or DAZ, or changes in mask bits.",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "fp_retired_ser_ops.sse_bot_ret",
+    "EventCode": "0x05",
+    "BriefDescription": "SSE bottom-executing uOps retired.",
+    "PublicDescription": "The number of serializing Ops retired. SSE bottom-executing uOps retired.",
+    "UMask": "0x1"
+  }
+]
diff --git a/tools/perf/pmu-events/arch/x86/amdzen1/memory.json b/tools/perf/pmu-events/arch/x86/amdzen1/memory.json
new file mode 100644
index 0000000..b33a3c3
--- /dev/null
+++ b/tools/perf/pmu-events/arch/x86/amdzen1/memory.json
@@ -0,0 +1,184 @@
+[
+  {
+    "EventName": "ls_locks.bus_lock",
+    "EventCode": "0x25",
+    "BriefDescription": "Bus lock when a locked operations crosses a cache boundary or is done on an uncacheable memory type.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "ls_dispatch.ld_st_dispatch",
+    "EventCode": "0x29",
+    "BriefDescription": "Counts the number of operations dispatched to the LS unit. Unit Masks ADDed. Load-op-Stores.",
+    "UMask": "0x4"
+  },
+  {
+    "EventName": "ls_dispatch.store_dispatch",
+    "EventCode": "0x29",
+    "BriefDescription": "Counts the number of stores dispatched to the LS unit. Unit Masks ADDed.",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "ls_dispatch.ld_dispatch",
+    "EventCode": "0x29",
+    "BriefDescription": "Counts the number of loads dispatched to the LS unit. Unit Masks ADDed.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "ls_stlf",
+    "EventCode": "0x35",
+    "BriefDescription": "Number of STLF hits."
+  },
+  {
+    "EventName": "ls_dc_accesses",
+    "EventCode": "0x40",
+    "BriefDescription": "The number of accesses to the data cache for load and store references. This may include certain microcode scratchpad accesses, although these are generally rare. Each increment represents an eight-byte access, although the instruction may only be accessing a portion of that. This event is a speculative event."
+  },
+  {
+    "EventName": "ls_mab_alloc.dc_prefetcher",
+    "EventCode": "0x41",
+    "BriefDescription": "LS MAB allocates by type - DC prefetcher.",
+    "UMask": "0x8"
+  },
+  {
+    "EventName": "ls_mab_alloc.stores",
+    "EventCode": "0x41",
+    "BriefDescription": "LS MAB allocates by type - stores.",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "ls_mab_alloc.loads",
+    "EventCode": "0x41",
+    "BriefDescription": "LS MAB allocates by type - loads.",
+    "UMask": "0x01"
+  },
+  {
+    "EventName": "ls_l1_d_tlb_miss.all",
+    "EventCode": "0x45",
+    "BriefDescription": "L1 DTLB Miss or Reload off all sizes.",
+    "UMask": "0xff"
+  },
+  {
+    "EventName": "ls_l1_d_tlb_miss.tlb_reload_1g_l2_miss",
+    "EventCode": "0x45",
+    "BriefDescription": "L1 DTLB Miss of a page of 1G size.",
+    "UMask": "0x80"
+  },
+  {
+    "EventName": "ls_l1_d_tlb_miss.tlb_reload_2m_l2_miss",
+    "EventCode": "0x45",
+    "BriefDescription": "L1 DTLB Miss of a page of 2M size.",
+    "UMask": "0x40"
+  },
+  {
+    "EventName": "ls_l1_d_tlb_miss.tlb_reload_32k_l2_miss",
+    "EventCode": "0x45",
+    "BriefDescription": "L1 DTLB Miss of a page of 32K size.",
+    "UMask": "0x20"
+  },
+  {
+    "EventName": "ls_l1_d_tlb_miss.tlb_reload_4k_l2_miss",
+    "EventCode": "0x45",
+    "BriefDescription": "L1 DTLB Miss of a page of 4K size.",
+    "UMask": "0x10"
+  },
+  {
+    "EventName": "ls_l1_d_tlb_miss.tlb_reload_1g_l2_hit",
+    "EventCode": "0x45",
+    "BriefDescription": "L1 DTLB Reload of a page of 1G size.",
+    "UMask": "0x8"
+  },
+  {
+    "EventName": "ls_l1_d_tlb_miss.tlb_reload_2m_l2_hit",
+    "EventCode": "0x45",
+    "BriefDescription": "L1 DTLB Reload of a page of 2M size.",
+    "UMask": "0x4"
+  },
+  {
+    "EventName": "ls_l1_d_tlb_miss.tlb_reload_32k_l2_hit",
+    "EventCode": "0x45",
+    "BriefDescription": "L1 DTLB Reload of a page of 32K size.",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "ls_l1_d_tlb_miss.tlb_reload_4k_l2_hit",
+    "EventCode": "0x45",
+    "BriefDescription": "L1 DTLB Reload of a page of 4K size.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "ls_tablewalker.iside",
+    "EventCode": "0x46",
+    "BriefDescription": "Total Page Table Walks on I-side.",
+    "UMask": "0xc"
+  },
+  {
+    "EventName": "ls_tablewalker.ic_type1",
+    "EventCode": "0x46",
+    "BriefDescription": "Total Page Table Walks IC Type 1.",
+    "UMask": "0x8"
+  },
+  {
+    "EventName": "ls_tablewalker.ic_type0",
+    "EventCode": "0x46",
+    "BriefDescription": "Total Page Table Walks IC Type 0.",
+    "UMask": "0x4"
+  },
+  {
+    "EventName": "ls_tablewalker.dside",
+    "EventCode": "0x46",
+    "BriefDescription": "Total Page Table Walks on D-side.",
+    "UMask": "0x3"
+  },
+  {
+    "EventName": "ls_tablewalker.dc_type1",
+    "EventCode": "0x46",
+    "BriefDescription": "Total Page Table Walks DC Type 1.",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "ls_tablewalker.dc_type0",
+    "EventCode": "0x46",
+    "BriefDescription": "Total Page Table Walks DC Type 0.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "ls_misal_accesses",
+    "EventCode": "0x47",
+    "BriefDescription": "Misaligned loads."
+  },
+  {
+    "EventName": "ls_pref_instr_disp.prefetch_nta",
+    "EventCode": "0x4b",
+    "BriefDescription": "Software Prefetch Instructions (PREFETCHNTA instruction) Dispatched.",
+    "UMask": "0x4"
+  },
+  {
+    "EventName": "ls_pref_instr_disp.store_prefetch_w",
+    "EventCode": "0x4b",
+    "BriefDescription": "Software Prefetch Instructions (3DNow PREFETCHW instruction) Dispatched.",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "ls_pref_instr_disp.load_prefetch_w",
+    "EventCode": "0x4b",
+    "BriefDescription": "Software Prefetch Instructions Dispatched. Prefetch, Prefetch_T0_T1_T2.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "ls_inef_sw_pref.mab_mch_cnt",
+    "EventCode": "0x52",
+    "BriefDescription": "The number of software prefetches that did not fetch data outside of the processor core. Software PREFETCH instruction saw a match on an already-allocated miss request buffer.",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "ls_inef_sw_pref.data_pipe_sw_pf_dc_hit",
+    "EventCode": "0x52",
+    "BriefDescription": "The number of software prefetches that did not fetch data outside of the processor core. Software PREFETCH instruction saw a DC hit.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "ls_not_halted_cyc",
+    "EventCode": "0x76",
+    "BriefDescription": "Cycles not in Halt."
+  }
+]
diff --git a/tools/perf/pmu-events/arch/x86/amdzen1/other.json b/tools/perf/pmu-events/arch/x86/amdzen1/other.json
new file mode 100644
index 0000000..ff78009
--- /dev/null
+++ b/tools/perf/pmu-events/arch/x86/amdzen1/other.json
@@ -0,0 +1,56 @@
+[
+  {
+    "EventName": "ic_oc_mode_switch.oc_ic_mode_switch",
+    "EventCode": "0x28a",
+    "BriefDescription": "OC Mode Switch. OC to IC mode switch.",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "ic_oc_mode_switch.ic_oc_mode_switch",
+    "EventCode": "0x28a",
+    "BriefDescription": "OC Mode Switch. IC to OC mode switch.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "de_dis_dispatch_token_stalls0.retire_token_stall",
+    "EventCode": "0xaf",
+    "BriefDescription": "Cycles where a dispatch group is valid but does not get dispatched due to a token stall. RETIRE Tokens unavailable.",
+    "UMask": "0x40"
+  },
+  {
+    "EventName": "de_dis_dispatch_token_stalls0.agsq_token_stall",
+    "EventCode": "0xaf",
+    "BriefDescription": "Cycles where a dispatch group is valid but does not get dispatched due to a token stall. AGSQ Tokens unavailable.",
+    "UMask": "0x20"
+  },
+  {
+    "EventName": "de_dis_dispatch_token_stalls0.alu_token_stall",
+    "EventCode": "0xaf",
+    "BriefDescription": "Cycles where a dispatch group is valid but does not get dispatched due to a token stall. ALU tokens total unavailable.",
+    "UMask": "0x10"
+  },
+  {
+    "EventName": "de_dis_dispatch_token_stalls0.alsq3_0_token_stall",
+    "EventCode": "0xaf",
+    "BriefDescription": "Cycles where a dispatch group is valid but does not get dispatched due to a token stall. ALSQ 3_0 Tokens unavailable.",
+    "UMask": "0x8"
+  },
+  {
+    "EventName": "de_dis_dispatch_token_stalls0.alsq3_token_stall",
+    "EventCode": "0xaf",
+    "BriefDescription": "Cycles where a dispatch group is valid but does not get dispatched due to a token stall. ALSQ 3 Tokens unavailable.",
+    "UMask": "0x4"
+  },
+  {
+    "EventName": "de_dis_dispatch_token_stalls0.alsq2_token_stall",
+    "EventCode": "0xaf",
+    "BriefDescription": "Cycles where a dispatch group is valid but does not get dispatched due to a token stall. ALSQ 2 Tokens unavailable.",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "de_dis_dispatch_token_stalls0.alsq1_token_stall",
+    "EventCode": "0xaf",
+    "BriefDescription": "Cycles where a dispatch group is valid but does not get dispatched due to a token stall. ALSQ 1 Tokens unavailable.",
+    "UMask": "0x1"
+  }
+]
diff --git a/tools/perf/pmu-events/arch/x86/amdzen2/branch.json b/tools/perf/pmu-events/arch/x86/amdzen2/branch.json
new file mode 100644
index 0000000..ef4166a
--- /dev/null
+++ b/tools/perf/pmu-events/arch/x86/amdzen2/branch.json
@@ -0,0 +1,52 @@
+[
+  {
+    "EventName": "bp_l1_btb_correct",
+    "EventCode": "0x8a",
+    "BriefDescription": "L1 Branch Prediction Overrides Existing Prediction (speculative)."
+  },
+  {
+    "EventName": "bp_l2_btb_correct",
+    "EventCode": "0x8b",
+    "BriefDescription": "L2 Branch Prediction Overrides Existing Prediction (speculative)."
+  },
+  {
+    "EventName": "bp_dyn_ind_pred",
+    "EventCode": "0x8e",
+    "BriefDescription": "Dynamic Indirect Predictions.",
+    "PublicDescription": "Indirect Branch Prediction for potential multi-target branch (speculative)."
+  },
+  {
+    "EventName": "bp_de_redirect",
+    "EventCode": "0x91",
+    "BriefDescription": "Decoder Overrides Existing Branch Prediction (speculative)."
+  },
+  {
+    "EventName": "bp_l1_tlb_fetch_hit",
+    "EventCode": "0x94",
+    "BriefDescription": "The number of instruction fetches that hit in the L1 ITLB.",
+    "UMask": "0xFF"
+  },
+  {
+    "EventName": "bp_l1_tlb_fetch_hit.if1g",
+    "EventCode": "0x94",
+    "BriefDescription": "The number of instruction fetches that hit in the L1 ITLB. Instruction fetches to a 1GB page.",
+    "UMask": "0x4"
+  },
+  {
+    "EventName": "bp_l1_tlb_fetch_hit.if2m",
+    "EventCode": "0x94",
+    "BriefDescription": "The number of instruction fetches that hit in the L1 ITLB. Instruction fetches to a 2MB page.",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "bp_l1_tlb_fetch_hit.if4k",
+    "EventCode": "0x94",
+    "BriefDescription": "The number of instruction fetches that hit in the L1 ITLB. Instruction fetches to a 4KB page.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "bp_tlb_rel",
+    "EventCode": "0x99",
+    "BriefDescription": "The number of ITLB reload requests."
+  }
+]
diff --git a/tools/perf/pmu-events/arch/x86/amdzen2/cache.json b/tools/perf/pmu-events/arch/x86/amdzen2/cache.json
new file mode 100644
index 0000000..1c60bfa
--- /dev/null
+++ b/tools/perf/pmu-events/arch/x86/amdzen2/cache.json
@@ -0,0 +1,338 @@
+[
+  {
+    "EventName": "l2_request_g1.rd_blk_l",
+    "EventCode": "0x60",
+    "BriefDescription": "All L2 Cache Requests (Breakdown 1 - Common). Data cache reads (including hardware and software prefetch).",
+    "UMask": "0x80"
+  },
+  {
+    "EventName": "l2_request_g1.rd_blk_x",
+    "EventCode": "0x60",
+    "BriefDescription": "All L2 Cache Requests (Breakdown 1 - Common). Data cache stores.",
+    "UMask": "0x40"
+  },
+  {
+    "EventName": "l2_request_g1.ls_rd_blk_c_s",
+    "EventCode": "0x60",
+    "BriefDescription": "All L2 Cache Requests (Breakdown 1 - Common). Data cache shared reads.",
+    "UMask": "0x20"
+  },
+  {
+    "EventName": "l2_request_g1.cacheable_ic_read",
+    "EventCode": "0x60",
+    "BriefDescription": "All L2 Cache Requests (Breakdown 1 - Common). Instruction cache reads.",
+    "UMask": "0x10"
+  },
+  {
+    "EventName": "l2_request_g1.change_to_x",
+    "EventCode": "0x60",
+    "BriefDescription": "All L2 Cache Requests (Breakdown 1 - Common). Data cache state change requests. Request change to writable, check L2 for current state.",
+    "UMask": "0x8"
+  },
+  {
+    "EventName": "l2_request_g1.prefetch_l2_cmd",
+    "EventCode": "0x60",
+    "BriefDescription": "All L2 Cache Requests (Breakdown 1 - Common). PrefetchL2Cmd.",
+    "UMask": "0x4"
+  },
+  {
+    "EventName": "l2_request_g1.l2_hw_pf",
+    "EventCode": "0x60",
+    "BriefDescription": "All L2 Cache Requests (Breakdown 1 - Common). L2 Prefetcher. All prefetches accepted by L2 pipeline, hit or miss. Types of PF and L2 hit/miss broken out in a separate perfmon event.",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "l2_request_g1.group2",
+    "EventCode": "0x60",
+    "BriefDescription": "Miscellaneous events covered in more detail by l2_request_g2 (PMCx061).",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "l2_request_g2.group1",
+    "EventCode": "0x61",
+    "BriefDescription": "Miscellaneous events covered in more detail by l2_request_g1 (PMCx060).",
+    "UMask": "0x80"
+  },
+  {
+    "EventName": "l2_request_g2.ls_rd_sized",
+    "EventCode": "0x61",
+    "BriefDescription": "All L2 Cache Requests (Breakdown 2 - Rare). Data cache read sized.",
+    "UMask": "0x40"
+  },
+  {
+    "EventName": "l2_request_g2.ls_rd_sized_nc",
+    "EventCode": "0x61",
+    "BriefDescription": "All L2 Cache Requests (Breakdown 2 - Rare). Data cache read sized non-cacheable.",
+    "UMask": "0x20"
+  },
+  {
+    "EventName": "l2_request_g2.ic_rd_sized",
+    "EventCode": "0x61",
+    "BriefDescription": "All L2 Cache Requests (Breakdown 2 - Rare). Instruction cache read sized.",
+    "UMask": "0x10"
+  },
+  {
+    "EventName": "l2_request_g2.ic_rd_sized_nc",
+    "EventCode": "0x61",
+    "BriefDescription": "All L2 Cache Requests (Breakdown 2 - Rare). Instruction cache read sized non-cacheable.",
+    "UMask": "0x8"
+  },
+  {
+    "EventName": "l2_request_g2.smc_inval",
+    "EventCode": "0x61",
+    "BriefDescription": "All L2 Cache Requests (Breakdown 2 - Rare). Self-modifying code invalidates.",
+    "UMask": "0x4"
+  },
+  {
+    "EventName": "l2_request_g2.bus_locks_originator",
+    "EventCode": "0x61",
+    "BriefDescription": "All L2 Cache Requests (Breakdown 2 - Rare). Bus locks.",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "l2_request_g2.bus_locks_responses",
+    "EventCode": "0x61",
+    "BriefDescription": "All L2 Cache Requests (Breakdown 2 - Rare). Bus lock response.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "l2_latency.l2_cycles_waiting_on_fills",
+    "EventCode": "0x62",
+    "BriefDescription": "Total cycles spent waiting for L2 fills to complete from L3 or memory, divided by four. Event counts are for both threads. To calculate average latency, the number of fills from both threads must be used.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "l2_wcb_req.wcb_write",
+    "EventCode": "0x63",
+    "BriefDescription": "LS to L2 WCB write requests. LS (Load/Store unit) to L2 WCB (Write Combining Buffer) write requests.",
+    "UMask": "0x40"
+  },
+  {
+    "EventName": "l2_wcb_req.wcb_close",
+    "EventCode": "0x63",
+    "BriefDescription": "LS to L2 WCB close requests. LS (Load/Store unit) to L2 WCB (Write Combining Buffer) close requests.",
+    "UMask": "0x20"
+  },
+  {
+    "EventName": "l2_wcb_req.zero_byte_store",
+    "EventCode": "0x63",
+    "BriefDescription": "LS to L2 WCB zero byte store requests. LS (Load/Store unit) to L2 WCB (Write Combining Buffer) zero byte store requests.",
+    "UMask": "0x4"
+  },
+  {
+    "EventName": "l2_wcb_req.cl_zero",
+    "EventCode": "0x63",
+    "BriefDescription": "LS to L2 WCB cache line zeroing requests. LS (Load/Store unit) to L2 WCB (Write Combining Buffer) cache line zeroing requests.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "l2_cache_req_stat.ls_rd_blk_cs",
+    "EventCode": "0x64",
+    "BriefDescription": "Core to L2 cacheable request access status (not including L2 Prefetch). Data cache shared read hit in L2",
+    "UMask": "0x80"
+  },
+  {
+    "EventName": "l2_cache_req_stat.ls_rd_blk_l_hit_x",
+    "EventCode": "0x64",
+    "BriefDescription": "Core to L2 cacheable request access status (not including L2 Prefetch). Data cache read hit in L2.",
+    "UMask": "0x40"
+  },
+  {
+    "EventName": "l2_cache_req_stat.ls_rd_blk_l_hit_s",
+    "EventCode": "0x64",
+    "BriefDescription": "Core to L2 cacheable request access status (not including L2 Prefetch). Data cache read hit on shared line in L2.",
+    "UMask": "0x20"
+  },
+  {
+    "EventName": "l2_cache_req_stat.ls_rd_blk_x",
+    "EventCode": "0x64",
+    "BriefDescription": "Core to L2 cacheable request access status (not including L2 Prefetch). Data cache store or state change hit in L2.",
+    "UMask": "0x10"
+  },
+  {
+    "EventName": "l2_cache_req_stat.ls_rd_blk_c",
+    "EventCode": "0x64",
+    "BriefDescription": "Core to L2 cacheable request access status (not including L2 Prefetch). Data cache request miss in L2 (all types).",
+    "UMask": "0x8"
+  },
+  {
+    "EventName": "l2_cache_req_stat.ic_fill_hit_x",
+    "EventCode": "0x64",
+    "BriefDescription": "Core to L2 cacheable request access status (not including L2 Prefetch). Instruction cache hit modifiable line in L2.",
+    "UMask": "0x4"
+  },
+  {
+    "EventName": "l2_cache_req_stat.ic_fill_hit_s",
+    "EventCode": "0x64",
+    "BriefDescription": "Core to L2 cacheable request access status (not including L2 Prefetch). Instruction cache hit clean line in L2.",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "l2_cache_req_stat.ic_fill_miss",
+    "EventCode": "0x64",
+    "BriefDescription": "Core to L2 cacheable request access status (not including L2 Prefetch). Instruction cache request miss in L2.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "l2_fill_pending.l2_fill_busy",
+    "EventCode": "0x6d",
+    "BriefDescription": "Cycles with fill pending from L2. Total cycles spent with one or more fill requests in flight from L2.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "l2_pf_hit_l2",
+    "EventCode": "0x70",
+    "BriefDescription": "L2 prefetch hit in L2.",
+    "UMask": "0xff"
+  },
+  {
+    "EventName": "l2_pf_miss_l2_hit_l3",
+    "EventCode": "0x71",
+    "BriefDescription": "L2 prefetcher hits in L3. Counts all L2 prefetches accepted by the L2 pipeline which miss the L2 cache and hit the L3.",
+    "UMask": "0xff"
+  },
+  {
+    "EventName": "l2_pf_miss_l2_l3",
+    "EventCode": "0x72",
+    "BriefDescription": "L2 prefetcher misses in L3. All L2 prefetches accepted by the L2 pipeline which miss the L2 and the L3 caches.",
+    "UMask": "0xff"
+  },
+  {
+    "EventName": "ic_fw32",
+    "EventCode": "0x80",
+    "BriefDescription": "The number of 32B fetch windows transferred from IC pipe to DE instruction decoder (includes non-cacheable and cacheable fill responses)."
+  },
+  {
+    "EventName": "ic_fw32_miss",
+    "EventCode": "0x81",
+    "BriefDescription": "The number of 32B fetch windows tried to read the L1 IC and missed in the full tag."
+  },
+  {
+    "EventName": "ic_cache_fill_l2",
+    "EventCode": "0x82",
+    "BriefDescription": "The number of 64 byte instruction cache line was fulfilled from the L2 cache."
+  },
+  {
+    "EventName": "ic_cache_fill_sys",
+    "EventCode": "0x83",
+    "BriefDescription": "The number of 64 byte instruction cache line fulfilled from system memory or another cache."
+  },
+  {
+    "EventName": "bp_l1_tlb_miss_l2_hit",
+    "EventCode": "0x84",
+    "BriefDescription": "The number of instruction fetches that miss in the L1 ITLB but hit in the L2 ITLB."
+  },
+  {
+    "EventName": "bp_l1_tlb_miss_l2_tlb_miss",
+    "EventCode": "0x85",
+    "BriefDescription": "The number of instruction fetches that miss in both the L1 and L2 TLBs.",
+    "UMask": "0xff"
+  },
+  {
+    "EventName": "bp_l1_tlb_miss_l2_tlb_miss.if1g",
+    "EventCode": "0x85",
+    "BriefDescription": "The number of instruction fetches that miss in both the L1 and L2 TLBs. Instruction fetches to a 1GB page.",
+    "UMask": "0x4"
+  },
+  {
+    "EventName": "bp_l1_tlb_miss_l2_tlb_miss.if2m",
+    "EventCode": "0x85",
+    "BriefDescription": "The number of instruction fetches that miss in both the L1 and L2 TLBs. Instruction fetches to a 2MB page.",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "bp_l1_tlb_miss_l2_tlb_miss.if4k",
+    "EventCode": "0x85",
+    "BriefDescription": "The number of instruction fetches that miss in both the L1 and L2 TLBs. Instruction fetches to a 4KB page.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "bp_snp_re_sync",
+    "EventCode": "0x86",
+    "BriefDescription": "The number of pipeline restarts caused by invalidating probes that hit on the instruction stream currently being executed. This would happen if the active instruction stream was being modified by another processor in an MP system - typically a highly unlikely event."
+  },
+  {
+    "EventName": "ic_fetch_stall.ic_stall_any",
+    "EventCode": "0x87",
+    "BriefDescription": "Instruction Pipe Stall. IC pipe was stalled during this clock cycle for any reason (nothing valid in pipe ICM1).",
+    "UMask": "0x4"
+  },
+  {
+    "EventName": "ic_fetch_stall.ic_stall_dq_empty",
+    "EventCode": "0x87",
+    "BriefDescription": "Instruction Pipe Stall. IC pipe was stalled during this clock cycle (including IC to OC fetches) due to DQ empty.",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "ic_fetch_stall.ic_stall_back_pressure",
+    "EventCode": "0x87",
+    "BriefDescription": "Instruction Pipe Stall. IC pipe was stalled during this clock cycle (including IC to OC fetches) due to back-pressure.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "ic_cache_inval.l2_invalidating_probe",
+    "EventCode": "0x8c",
+    "BriefDescription": "IC line invalidated due to L2 invalidating probe (external or LS). The number of instruction cache lines invalidated. A non-SMC event is CMC (cross modifying code), either from the other thread of the core or another core.",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "ic_cache_inval.fill_invalidated",
+    "EventCode": "0x8c",
+    "BriefDescription": "IC line invalidated due to overwriting fill response. The number of instruction cache lines invalidated. A non-SMC event is CMC (cross modifying code), either from the other thread of the core or another core.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "ic_oc_mode_switch.oc_ic_mode_switch",
+    "EventCode": "0x28a",
+    "BriefDescription": "OC Mode Switch. OC to IC mode switch.",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "ic_oc_mode_switch.ic_oc_mode_switch",
+    "EventCode": "0x28a",
+    "BriefDescription": "OC Mode Switch. IC to OC mode switch.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "l3_request_g1.caching_l3_cache_accesses",
+    "EventCode": "0x01",
+    "BriefDescription": "Caching: L3 cache accesses",
+    "UMask": "0x80",
+    "Unit": "L3PMC"
+  },
+  {
+    "EventName": "l3_lookup_state.all_l3_req_typs",
+    "EventCode": "0x04",
+    "BriefDescription": "All L3 Request Types",
+    "UMask": "0xff",
+    "Unit": "L3PMC"
+  },
+  {
+    "EventName": "l3_comb_clstr_state.other_l3_miss_typs",
+    "EventCode": "0x06",
+    "BriefDescription": "Other L3 Miss Request Types",
+    "UMask": "0xfe",
+    "Unit": "L3PMC"
+  },
+  {
+    "EventName": "l3_comb_clstr_state.request_miss",
+    "EventCode": "0x06",
+    "BriefDescription": "L3 cache misses",
+    "UMask": "0x01",
+    "Unit": "L3PMC"
+  },
+  {
+    "EventName": "xi_sys_fill_latency",
+    "EventCode": "0x90",
+    "BriefDescription": "L3 Cache Miss Latency. Total cycles for all transactions divided by 16. Ignores SliceMask and ThreadMask.",
+    "UMask": "0x00",
+    "Unit": "L3PMC"
+  },
+  {
+    "EventName": "xi_ccx_sdp_req1.all_l3_miss_req_typs",
+    "EventCode": "0x9A",
+    "BriefDescription": "All L3 Miss Request Types. Ignores SliceMask and ThreadMask.",
+    "UMask": "0x3f",
+    "Unit": "L3PMC"
+  }
+]
diff --git a/tools/perf/pmu-events/arch/x86/amdzen2/core.json b/tools/perf/pmu-events/arch/x86/amdzen2/core.json
new file mode 100644
index 0000000..de89e5a
--- /dev/null
+++ b/tools/perf/pmu-events/arch/x86/amdzen2/core.json
@@ -0,0 +1,130 @@
+[
+  {
+    "EventName": "ex_ret_instr",
+    "EventCode": "0xc0",
+    "BriefDescription": "Retired Instructions."
+  },
+  {
+    "EventName": "ex_ret_cops",
+    "EventCode": "0xc1",
+    "BriefDescription": "Retired Uops.",
+    "PublicDescription": "The number of micro-ops retired. This count includes all processor activity (instructions, exceptions, interrupts, microcode assists, etc.). The number of events logged per cycle can vary from 0 to 8."
+  },
+  {
+    "EventName": "ex_ret_brn",
+    "EventCode": "0xc2",
+    "BriefDescription": "Retired Branch Instructions.",
+    "PublicDescription": "The number of branch instructions retired. This includes all types of architectural control flow changes, including exceptions and interrupts."
+  },
+  {
+    "EventName": "ex_ret_brn_misp",
+    "EventCode": "0xc3",
+    "BriefDescription": "Retired Branch Instructions Mispredicted.",
+    "PublicDescription": "The number of branch instructions retired, of any type, that were not correctly predicted. This includes those for which prediction is not attempted (far control transfers, exceptions and interrupts)."
+  },
+  {
+    "EventName": "ex_ret_brn_tkn",
+    "EventCode": "0xc4",
+    "BriefDescription": "Retired Taken Branch Instructions.",
+    "PublicDescription": "The number of taken branches that were retired. This includes all types of architectural control flow changes, including exceptions and interrupts."
+  },
+  {
+    "EventName": "ex_ret_brn_tkn_misp",
+    "EventCode": "0xc5",
+    "BriefDescription": "Retired Taken Branch Instructions Mispredicted.",
+    "PublicDescription": "The number of retired taken branch instructions that were mispredicted."
+  },
+  {
+    "EventName": "ex_ret_brn_far",
+    "EventCode": "0xc6",
+    "BriefDescription": "Retired Far Control Transfers.",
+    "PublicDescription": "The number of far control transfers retired including far call/jump/return, IRET, SYSCALL and SYSRET, plus exceptions and interrupts. Far control transfers are not subject to branch prediction."
+  },
+  {
+    "EventName": "ex_ret_brn_resync",
+    "EventCode": "0xc7",
+    "BriefDescription": "Retired Branch Resyncs.",
+    "PublicDescription": "The number of resync branches. These reflect pipeline restarts due to certain microcode assists and events such as writes to the active instruction stream, among other things. Each occurrence reflects a restart penalty similar to a branch mispredict. This is relatively rare."
+  },
+  {
+    "EventName": "ex_ret_near_ret",
+    "EventCode": "0xc8",
+    "BriefDescription": "Retired Near Returns.",
+    "PublicDescription": "The number of near return instructions (RET or RET Iw) retired."
+  },
+  {
+    "EventName": "ex_ret_near_ret_mispred",
+    "EventCode": "0xc9",
+    "BriefDescription": "Retired Near Returns Mispredicted.",
+    "PublicDescription": "The number of near returns retired that were not correctly predicted by the return address predictor. Each such mispredict incurs the same penalty as a mispredicted conditional branch instruction."
+  },
+  {
+    "EventName": "ex_ret_brn_ind_misp",
+    "EventCode": "0xca",
+    "BriefDescription": "Retired Indirect Branch Instructions Mispredicted."
+  },
+  {
+    "EventName": "ex_ret_mmx_fp_instr.sse_instr",
+    "EventCode": "0xcb",
+    "BriefDescription": "SSE instructions (SSE, SSE2, SSE3, SSSE3, SSE4A, SSE41, SSE42, AVX).",
+    "PublicDescription": "The number of MMX, SSE or x87 instructions retired. The UnitMask allows the selection of the individual classes of instructions as given in the table. Each increment represents one complete instruction. Since this event includes non-numeric instructions it is not suitable for measuring MFLOPS. SSE instructions (SSE, SSE2, SSE3, SSSE3, SSE4A, SSE41, SSE42, AVX).",
+    "UMask": "0x4"
+  },
+  {
+    "EventName": "ex_ret_mmx_fp_instr.mmx_instr",
+    "EventCode": "0xcb",
+    "BriefDescription": "MMX instructions.",
+    "PublicDescription": "The number of MMX, SSE or x87 instructions retired. The UnitMask allows the selection of the individual classes of instructions as given in the table. Each increment represents one complete instruction. Since this event includes non-numeric instructions it is not suitable for measuring MFLOPS. MMX instructions.",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "ex_ret_mmx_fp_instr.x87_instr",
+    "EventCode": "0xcb",
+    "BriefDescription": "x87 instructions.",
+    "PublicDescription": "The number of MMX, SSE or x87 instructions retired. The UnitMask allows the selection of the individual classes of instructions as given in the table. Each increment represents one complete instruction. Since this event includes non-numeric instructions it is not suitable for measuring MFLOPS. x87 instructions.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "ex_ret_cond",
+    "EventCode": "0xd1",
+    "BriefDescription": "Retired Conditional Branch Instructions."
+  },
+  {
+    "EventName": "ex_ret_cond_misp",
+    "EventCode": "0xd2",
+    "BriefDescription": "Retired Conditional Branch Instructions Mispredicted."
+  },
+  {
+    "EventName": "ex_div_busy",
+    "EventCode": "0xd3",
+    "BriefDescription": "Div Cycles Busy count."
+  },
+  {
+    "EventName": "ex_div_count",
+    "EventCode": "0xd4",
+    "BriefDescription": "Div Op Count."
+  },
+  {
+    "EventName": "ex_tagged_ibs_ops.ibs_count_rollover",
+    "EventCode": "0x1cf",
+    "BriefDescription": "Tagged IBS Ops. Number of times an op could not be tagged by IBS because of a previous tagged op that has not retired.",
+    "UMask": "0x4"
+  },
+  {
+    "EventName": "ex_tagged_ibs_ops.ibs_tagged_ops_ret",
+    "EventCode": "0x1cf",
+    "BriefDescription": "Tagged IBS Ops. Number of Ops tagged by IBS that retired.",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "ex_tagged_ibs_ops.ibs_tagged_ops",
+    "EventCode": "0x1cf",
+    "BriefDescription": "Tagged IBS Ops. Number of Ops tagged by IBS.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "ex_ret_fus_brnch_inst",
+    "EventCode": "0x1d0",
+    "BriefDescription": "Retired Fused Instructions. The number of fuse-branch instructions retired per cycle. The number of events logged per cycle can vary from 0-8.",
+  }
+]
diff --git a/tools/perf/pmu-events/arch/x86/amdzen2/floating-point.json b/tools/perf/pmu-events/arch/x86/amdzen2/floating-point.json
new file mode 100644
index 0000000..622a0c4
--- /dev/null
+++ b/tools/perf/pmu-events/arch/x86/amdzen2/floating-point.json
@@ -0,0 +1,140 @@
+[
+  {
+    "EventName": "fpu_pipe_assignment.total",
+    "EventCode": "0x00",
+    "BriefDescription": "Total number of fp uOps.",
+    "PublicDescription": "Total number of fp uOps. The number of operations (uOps) dispatched to each of the 4 FPU execution pipelines. This event reflects how busy the FPU pipelines are and may be used for workload characterization. This includes all operations performed by x87, MMX, and SSE instructions, including moves. Each increment represents a one- cycle dispatch event. This event is a speculative event. Since this event includes non-numeric operations it is not suitable for measuring MFLOPS.",
+    "UMask": "0xf"
+  },
+  {
+    "EventName": "fpu_pipe_assignment.total3",
+    "EventCode": "0x00",
+    "BriefDescription": "Total number uOps assigned to pipe 3.",
+    "PublicDescription": "The number of operations (uOps) dispatched to each of the 4 FPU execution pipelines. This event reflects how busy the FPU pipelines are and may be used for workload characterization. This includes all operations performed by x87, MMX, and SSE instructions, including moves. Each increment represents a one-cycle dispatch event. This event is a speculative event. Since this event includes non-numeric operations it is not suitable for measuring MFLOPS. Total number uOps assigned to pipe 3.",
+    "UMask": "0x8"
+  },
+  {
+    "EventName": "fpu_pipe_assignment.total2",
+    "EventCode": "0x00",
+    "BriefDescription": "Total number uOps assigned to pipe 2.",
+    "PublicDescription": "The number of operations (uOps) dispatched to each of the 4 FPU execution pipelines. This event reflects how busy the FPU pipelines are and may be used for workload characterization. This includes all operations performed by x87, MMX, and SSE instructions, including moves. Each increment represents a one- cycle dispatch event. This event is a speculative event. Since this event includes non-numeric operations it is not suitable for measuring MFLOPS. Total number uOps assigned to pipe 2.",
+    "UMask": "0x4"
+  },
+  {
+    "EventName": "fpu_pipe_assignment.total1",
+    "EventCode": "0x00",
+    "BriefDescription": "Total number uOps assigned to pipe 1.",
+    "PublicDescription": "The number of operations (uOps) dispatched to each of the 4 FPU execution pipelines. This event reflects how busy the FPU pipelines are and may be used for workload characterization. This includes all operations performed by x87, MMX, and SSE instructions, including moves. Each increment represents a one- cycle dispatch event. This event is a speculative event. Since this event includes non-numeric operations it is not suitable for measuring MFLOPS. Total number uOps assigned to pipe 1.",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "fpu_pipe_assignment.total0",
+    "EventCode": "0x00",
+    "BriefDescription": "Total number of fp uOps  on pipe 0.",
+    "PublicDescription": "The number of operations (uOps) dispatched to each of the 4 FPU execution pipelines. This event reflects how busy the FPU pipelines are and may be used for workload characterization. This includes all operations performed by x87, MMX, and SSE instructions, including moves. Each increment represents a one- cycle dispatch event. This event is a speculative event. Since this event includes non-numeric operations it is not suitable for measuring MFLOPS. Total number uOps assigned to pipe 0.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "fp_ret_sse_avx_ops.all",
+    "EventCode": "0x03",
+    "BriefDescription": "All FLOPS. This is a retire-based event. The number of retired SSE/AVX FLOPS. The number of events logged per cycle can vary from 0 to 64. This event can count above 15.",
+    "UMask": "0xff"
+  },
+  {
+    "EventName": "fp_ret_sse_avx_ops.mac_flops",
+    "EventCode": "0x03",
+    "BriefDescription": "Multiply-add FLOPS. Multiply-add counts as 2 FLOPS. This is a retire-based event. The number of retired SSE/AVX FLOPS. The number of events logged per cycle can vary from 0 to 64. This event can count above 15.",
+    "PublicDescription": "",
+    "UMask": "0x8"
+  },
+  {
+    "EventName": "fp_ret_sse_avx_ops.div_flops",
+    "EventCode": "0x03",
+    "BriefDescription": "Divide/square root FLOPS. This is a retire-based event. The number of retired SSE/AVX FLOPS. The number of events logged per cycle can vary from 0 to 64. This event can count above 15.",
+    "UMask": "0x4"
+  },
+  {
+    "EventName": "fp_ret_sse_avx_ops.mult_flops",
+    "EventCode": "0x03",
+    "BriefDescription": "Multiply FLOPS. This is a retire-based event. The number of retired SSE/AVX FLOPS. The number of events logged per cycle can vary from 0 to 64. This event can count above 15.",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "fp_ret_sse_avx_ops.add_sub_flops",
+    "EventCode": "0x03",
+    "BriefDescription": "Add/subtract FLOPS. This is a retire-based event. The number of retired SSE/AVX FLOPS. The number of events logged per cycle can vary from 0 to 64. This event can count above 15.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "fp_num_mov_elim_scal_op.optimized",
+    "EventCode": "0x04",
+    "BriefDescription": "Number of Scalar Ops optimized. This is a dispatch based speculative event, and is useful for measuring the effectiveness of the Move elimination and Scalar code optimization schemes.",
+    "UMask": "0x8"
+  },
+  {
+    "EventName": "fp_num_mov_elim_scal_op.opt_potential",
+    "EventCode": "0x04",
+    "BriefDescription": "Number of Ops that are candidates for optimization (have Z-bit either set or pass). This is a dispatch based speculative event, and is useful for measuring the effectiveness of the Move elimination and Scalar code optimization schemes.",
+    "UMask": "0x4"
+  },
+  {
+    "EventName": "fp_num_mov_elim_scal_op.sse_mov_ops_elim",
+    "EventCode": "0x04",
+    "BriefDescription": "Number of SSE Move Ops eliminated. This is a dispatch based speculative event, and is useful for measuring the effectiveness of the Move elimination and Scalar code optimization schemes.",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "fp_num_mov_elim_scal_op.sse_mov_ops",
+    "EventCode": "0x04",
+    "BriefDescription": "Number of SSE Move Ops. This is a dispatch based speculative event, and is useful for measuring the effectiveness of the Move elimination and Scalar code optimization schemes.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "fp_retired_ser_ops.sse_bot_ret",
+    "EventCode": "0x05",
+    "BriefDescription": "SSE bottom-executing uOps retired. The number of serializing Ops retired.",
+    "UMask": "0x8"
+  },
+  {
+    "EventName": "fp_retired_ser_ops.sse_ctrl_ret",
+    "EventCode": "0x05",
+    "BriefDescription": "The number of serializing Ops retired. SSE control word mispredict traps due to mispredictions in RC, FTZ or DAZ, or changes in mask bits.",
+    "UMask": "0x4"
+  },
+  {
+    "EventName": "fp_retired_ser_ops.x87_bot_ret",
+    "EventCode": "0x05",
+    "BriefDescription": "x87 bottom-executing uOps retired. The number of serializing Ops retired.",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "fp_retired_ser_ops.x87_ctrl_ret",
+    "EventCode": "0x05",
+    "BriefDescription": "x87 control word mispredict traps due to mispredictions in RC or PC, or changes in mask bits. The number of serializing Ops retired.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "fp_disp_faults.ymm_spill_fault",
+    "EventCode": "0x0e",
+    "BriefDescription": "Floating Point Dispatch Faults. YMM spill fault.",
+    "UMask": "0x8"
+  },
+  {
+    "EventName": "fp_disp_faults.ymm_fill_fault",
+    "EventCode": "0x0e",
+    "BriefDescription": "Floating Point Dispatch Faults. YMM fill fault.",
+    "UMask": "0x4"
+  },
+  {
+    "EventName": "fp_disp_faults.xmm_fill_fault",
+    "EventCode": "0x0e",
+    "BriefDescription": "Floating Point Dispatch Faults. XMM fill fault.",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "fp_disp_faults.x87_fill_fault",
+    "EventCode": "0x0e",
+    "BriefDescription": "Floating Point Dispatch Faults. x87 fill fault.",
+    "UMask": "0x1"
+  }
+]
diff --git a/tools/perf/pmu-events/arch/x86/amdzen2/memory.json b/tools/perf/pmu-events/arch/x86/amdzen2/memory.json
new file mode 100644
index 0000000..715046b
--- /dev/null
+++ b/tools/perf/pmu-events/arch/x86/amdzen2/memory.json
@@ -0,0 +1,341 @@
+[
+  {
+    "EventName": "ls_bad_status2.stli_other",
+    "EventCode": "0x24",
+    "BriefDescription": "Non-forwardable conflict; used to reduce STLI's via software. All reasons. Store To Load Interlock (STLI) are loads that were unable to complete because of a possible match with an older store, and the older store could not do STLF for some reason.",
+    "PublicDescription" : "Store-to-load conflicts: A load was unable to complete due to a non-forwardable conflict with an older store. Most commonly, a load's address range partially but not completely overlaps with an uncompleted older store. Software can avoid this problem by using same-size and same-alignment loads and stores when accessing the same data. Vector/SIMD code is particularly susceptible to this problem; software should construct wide vector stores by manipulating vector elements in registers using shuffle/blend/swap instructions prior to storing to memory, instead of using narrow element-by-element stores.",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "ls_locks.spec_lock_hi_spec",
+    "EventCode": "0x25",
+    "BriefDescription": "Retired lock instructions. High speculative cacheable lock speculation succeeded.",
+    "UMask": "0x8"
+  },
+  {
+    "EventName": "ls_locks.spec_lock_lo_spec",
+    "EventCode": "0x25",
+    "BriefDescription": "Retired lock instructions. Low speculative cacheable lock speculation succeeded.",
+    "UMask": "0x4"
+  },
+  {
+    "EventName": "ls_locks.non_spec_lock",
+    "EventCode": "0x25",
+    "BriefDescription": "Retired lock instructions. Non-speculative lock succeeded.",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "ls_locks.bus_lock",
+    "EventCode": "0x25",
+    "BriefDescription": "Retired lock instructions. Bus lock when a locked operations crosses a cache boundary or is done on an uncacheable memory type. Comparable to legacy bus lock.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "ls_ret_cl_flush",
+    "EventCode": "0x26",
+    "BriefDescription": "Number of retired CLFLUSH instructions."
+  },
+  {
+    "EventName": "ls_ret_cpuid",
+    "EventCode": "0x27",
+    "BriefDescription": "Number of retired CPUID instructions."
+  },
+  {
+    "EventName": "ls_dispatch.ld_st_dispatch",
+    "EventCode": "0x29",
+    "BriefDescription": "Dispatch of a single op that performs a load from and store to the same memory address. Number of single ops that do load/store to an address.",
+    "UMask": "0x4"
+  },
+  {
+    "EventName": "ls_dispatch.store_dispatch",
+    "EventCode": "0x29",
+    "BriefDescription": "Number of stores dispatched. Counts the number of operations dispatched to the LS unit. Unit Masks ADDed.",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "ls_dispatch.ld_dispatch",
+    "EventCode": "0x29",
+    "BriefDescription": "Number of loads dispatched. Counts the number of operations dispatched to the LS unit. Unit Masks ADDed.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "ls_smi_rx",
+    "EventCode": "0x2B",
+    "BriefDescription": "Number of SMIs received."
+  },
+  {
+    "EventName": "ls_int_taken",
+    "EventCode": "0x2C",
+    "BriefDescription": "Number of interrupts taken."
+  },
+  {
+    "EventName": "ls_rdtsc",
+    "EventCode": "0x2D",
+    "BriefDescription": "Number of reads of the TSC (RDTSC instructions). The count is speculative."
+  },
+  {
+    "EventName": "ls_stlf",
+    "EventCode": "0x35",
+    "BriefDescription": "Number of STLF hits."
+  },
+  {
+    "EventName": "ls_st_commit_cancel2.st_commit_cancel_wcb_full",
+    "EventCode": "0x37",
+    "BriefDescription": "A non-cacheable store and the non-cacheable commit buffer is full."
+  },
+  {
+    "EventName": "ls_dc_accesses",
+    "EventCode": "0x40",
+    "BriefDescription": "Number of accesses to the dcache for load/store references.",
+    "PublicDescription": "The number of accesses to the data cache for load and store references. This may include certain microcode scratchpad accesses, although these are generally rare. Each increment represents an eight-byte access, although the instruction may only be accessing a portion of that. This event is a speculative event."
+  },
+  {
+    "EventName": "ls_mab_alloc.dc_prefetcher",
+    "EventCode": "0x41",
+    "BriefDescription": "LS MAB Allocates by Type. DC prefetcher.",
+    "UMask": "0x8"
+  },
+  {
+    "EventName": "ls_mab_alloc.stores",
+    "EventCode": "0x41",
+    "BriefDescription": "LS MAB Allocates by Type. Stores.",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "ls_mab_alloc.loads",
+    "EventCode": "0x41",
+    "BriefDescription": "LS MAB Allocates by Type. Loads.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "ls_refills_from_sys.ls_mabresp_rmt_dram",
+    "EventCode": "0x43",
+    "BriefDescription": "Demand Data Cache Fills by Data Source. DRAM or IO from different die.",
+    "UMask": "0x40"
+  },
+  {
+    "EventName": "ls_refills_from_sys.ls_mabresp_rmt_cache",
+    "EventCode": "0x43",
+    "BriefDescription": "Demand Data Cache Fills by Data Source. Hit in cache; Remote CCX and the address's Home Node is on a different die.",
+    "UMask": "0x10"
+  },
+  {
+    "EventName": "ls_refills_from_sys.ls_mabresp_lcl_dram",
+    "EventCode": "0x43",
+    "BriefDescription": "Demand Data Cache Fills by Data Source. DRAM or IO from this thread's die.",
+    "UMask": "0x8"
+  },
+  {
+    "EventName": "ls_refills_from_sys.ls_mabresp_lcl_cache",
+    "EventCode": "0x43",
+    "BriefDescription": "Demand Data Cache Fills by Data Source. Hit in cache; local CCX (not Local L2), or Remote CCX and the address's Home Node is on this thread's die.",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "ls_refills_from_sys.ls_mabresp_lcl_l2",
+    "EventCode": "0x43",
+    "BriefDescription": "Demand Data Cache Fills by Data Source. Local L2 hit.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "ls_l1_d_tlb_miss.all",
+    "EventCode": "0x45",
+    "BriefDescription": "All L1 DTLB Misses or Reloads.",
+    "UMask": "0xff"
+  },
+  {
+    "EventName": "ls_l1_d_tlb_miss.tlb_reload_1g_l2_miss",
+    "EventCode": "0x45",
+    "BriefDescription": "L1 DTLB Miss. DTLB reload to a 1G page that miss in the L2 TLB.",
+    "UMask": "0x80"
+  },
+  {
+    "EventName": "ls_l1_d_tlb_miss.tlb_reload_2m_l2_miss",
+    "EventCode": "0x45",
+    "BriefDescription": "L1 DTLB Miss. DTLB reload to a 2M page that miss in the L2 TLB.",
+    "UMask": "0x40"
+  },
+  {
+    "EventName": "ls_l1_d_tlb_miss.tlb_reload_coalesced_page_miss",
+    "EventCode": "0x45",
+    "BriefDescription": "L1 DTLB Miss. DTLB reload coalesced page miss.",
+    "UMask": "0x20"
+  },
+  {
+    "EventName": "ls_l1_d_tlb_miss.tlb_reload_4k_l2_miss",
+    "EventCode": "0x45",
+    "BriefDescription": "L1 DTLB Miss. DTLB reload to a 4K page that miss the L2 TLB.",
+    "UMask": "0x10"
+  },
+  {
+    "EventName": "ls_l1_d_tlb_miss.tlb_reload_1g_l2_hit",
+    "EventCode": "0x45",
+    "BriefDescription": "L1 DTLB Miss. DTLB reload to a 1G page that hit in the L2 TLB.",
+    "UMask": "0x8"
+  },
+  {
+    "EventName": "ls_l1_d_tlb_miss.tlb_reload_2m_l2_hit",
+    "EventCode": "0x45",
+    "BriefDescription": "L1 DTLB Miss. DTLB reload to a 2M page that hit in the L2 TLB.",
+    "UMask": "0x4"
+  },
+  {
+    "EventName": "ls_l1_d_tlb_miss.tlb_reload_coalesced_page_hit",
+    "EventCode": "0x45",
+    "BriefDescription": "L1 DTLB Miss. DTLB reload hit a coalesced page.",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "ls_l1_d_tlb_miss.tlb_reload_4k_l2_hit",
+    "EventCode": "0x45",
+    "BriefDescription": "L1 DTLB Miss. DTLB reload to a 4K page that hit in the L2 TLB.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "ls_tablewalker.iside",
+    "EventCode": "0x46",
+    "BriefDescription": "Total Page Table Walks on I-side.",
+    "UMask": "0xc"
+  },
+  {
+    "EventName": "ls_tablewalker.ic_type1",
+    "EventCode": "0x46",
+    "BriefDescription": "Total Page Table Walks IC Type 1.",
+    "UMask": "0x8"
+  },
+  {
+    "EventName": "ls_tablewalker.ic_type0",
+    "EventCode": "0x46",
+    "BriefDescription": "Total Page Table Walks IC Type 0.",
+    "UMask": "0x4"
+  },
+  {
+    "EventName": "ls_tablewalker.dside",
+    "EventCode": "0x46",
+    "BriefDescription": "Total Page Table Walks on D-side.",
+    "UMask": "0x3"
+  },
+  {
+    "EventName": "ls_tablewalker.dc_type1",
+    "EventCode": "0x46",
+    "BriefDescription": "Total Page Table Walks DC Type 1.",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "ls_tablewalker.dc_type0",
+    "EventCode": "0x46",
+    "BriefDescription": "Total Page Table Walks DC Type 0.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "ls_misal_accesses",
+    "EventCode": "0x47",
+    "BriefDescription": "Misaligned loads."
+  },
+  {
+    "EventName": "ls_pref_instr_disp",
+    "EventCode": "0x4b",
+    "BriefDescription": "Software Prefetch Instructions Dispatched (Speculative).",
+    "UMask": "0xff"
+  },
+  {
+    "EventName": "ls_pref_instr_disp.prefetch_nta",
+    "EventCode": "0x4b",
+    "BriefDescription": "Software Prefetch Instructions Dispatched (Speculative). PrefetchNTA instruction. See docAPM3 PREFETCHlevel.",
+    "UMask": "0x4"
+  },
+  {
+    "EventName": "ls_pref_instr_disp.prefetch_w",
+    "EventCode": "0x4b",
+    "BriefDescription": "Software Prefetch Instructions Dispatched (Speculative). See docAPM3 PREFETCHW.",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "ls_pref_instr_disp.prefetch",
+    "EventCode": "0x4b",
+    "BriefDescription": "Software Prefetch Instructions Dispatched (Speculative). Prefetch_T0_T1_T2. PrefetchT0, T1 and T2 instructions. See docAPM3 PREFETCHlevel.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "ls_inef_sw_pref.mab_mch_cnt",
+    "EventCode": "0x52",
+    "BriefDescription": "The number of software prefetches that did not fetch data outside of the processor core. Software PREFETCH instruction saw a match on an already-allocated miss request buffer.",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "ls_inef_sw_pref.data_pipe_sw_pf_dc_hit",
+    "EventCode": "0x52",
+    "BriefDescription": "The number of software prefetches that did not fetch data outside of the processor core. Software PREFETCH instruction saw a DC hit.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "ls_sw_pf_dc_fill.ls_mabresp_rmt_dram",
+    "EventCode": "0x59",
+    "BriefDescription": "Software Prefetch Data Cache Fills by Data Source. From DRAM (home node remote).",
+    "UMask": "0x40"
+  },
+  {
+    "EventName": "ls_sw_pf_dc_fill.ls_mabresp_rmt_cache",
+    "EventCode": "0x59",
+    "BriefDescription": "Software Prefetch Data Cache Fills by Data Source. From another cache (home node remote).",
+    "UMask": "0x10"
+  },
+  {
+    "EventName": "ls_sw_pf_dc_fill.ls_mabresp_lcl_dram",
+    "EventCode": "0x59",
+    "BriefDescription": "Software Prefetch Data Cache Fills by Data Source. DRAM or IO from this thread's die.  From DRAM (home node local).",
+    "UMask": "0x8"
+  },
+  {
+    "EventName": "ls_sw_pf_dc_fill.ls_mabresp_lcl_cache",
+    "EventCode": "0x59",
+    "BriefDescription": "Software Prefetch Data Cache Fills by Data Source. From another cache (home node local).",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "ls_sw_pf_dc_fill.ls_mabresp_lcl_l2",
+    "EventCode": "0x59",
+    "BriefDescription": "Software Prefetch Data Cache Fills by Data Source. Local L2 hit.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "ls_hw_pf_dc_fill.ls_mabresp_rmt_dram",
+    "EventCode": "0x5A",
+    "BriefDescription": "Hardware Prefetch Data Cache Fills by Data Source. From DRAM (home node remote).",
+    "UMask": "0x40"
+  },
+  {
+    "EventName": "ls_hw_pf_dc_fill.ls_mabresp_rmt_cache",
+    "EventCode": "0x5A",
+    "BriefDescription": "Hardware Prefetch Data Cache Fills by Data Source. From another cache (home node remote).",
+    "UMask": "0x10"
+  },
+  {
+    "EventName": "ls_hw_pf_dc_fill.ls_mabresp_lcl_dram",
+    "EventCode": "0x5A",
+    "BriefDescription": "Hardware Prefetch Data Cache Fills by Data Source. From DRAM (home node local).",
+    "UMask": "0x8"
+  },
+  {
+    "EventName": "ls_hw_pf_dc_fill.ls_mabresp_lcl_cache",
+    "EventCode": "0x5A",
+    "BriefDescription": "Hardware Prefetch Data Cache Fills by Data Source. From another cache (home node local).",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "ls_hw_pf_dc_fill.ls_mabresp_lcl_l2",
+    "EventCode": "0x5A",
+    "BriefDescription": "Hardware Prefetch Data Cache Fills by Data Source. Local L2 hit.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "ls_not_halted_cyc",
+    "EventCode": "0x76",
+    "BriefDescription": "Cycles not in Halt."
+  },
+  {
+    "EventName": "ls_tlb_flush",
+    "EventCode": "0x78",
+    "BriefDescription": "All TLB Flushes"
+  }
+]
diff --git a/tools/perf/pmu-events/arch/x86/amdzen2/other.json b/tools/perf/pmu-events/arch/x86/amdzen2/other.json
new file mode 100644
index 0000000..e94994d
--- /dev/null
+++ b/tools/perf/pmu-events/arch/x86/amdzen2/other.json
@@ -0,0 +1,115 @@
+[
+  {
+    "EventName": "de_dis_uop_queue_empty_di0",
+    "EventCode": "0xa9",
+    "BriefDescription": "Cycles where the Micro-Op Queue is empty."
+  },
+  {
+    "EventName": "de_dis_uops_from_decoder",
+    "EventCode": "0xaa",
+    "BriefDescription": "Ops dispatched from either the decoders, OpCache or both.",
+    "UMask": "0xff"
+  },
+  {
+    "EventName": "de_dis_uops_from_decoder.opcache_dispatched",
+    "EventCode": "0xaa",
+    "BriefDescription": "Count of dispatched Ops from OpCache.",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "de_dis_uops_from_decoder.decoder_dispatched",
+    "EventCode": "0xaa",
+    "BriefDescription": "Count of dispatched Ops from Decoder.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "de_dis_dispatch_token_stalls1.fp_misc_rsrc_stall",
+    "EventCode": "0xae",
+    "BriefDescription": "Cycles where a dispatch group is valid but does not get dispatched due to a token stall. FP Miscellaneous resource unavailable. Applies to the recovery of mispredicts with FP ops.",
+    "UMask": "0x80"
+  },
+  {
+    "EventName": "de_dis_dispatch_token_stalls1.fp_sch_rsrc_stall",
+    "EventCode": "0xae",
+    "BriefDescription": "Cycles where a dispatch group is valid but does not get dispatched due to a token stall. FP scheduler resource stall. Applies to ops that use the FP scheduler.",
+    "UMask": "0x40"
+  },
+  {
+    "EventName": "de_dis_dispatch_token_stalls1.fp_reg_file_rsrc_stall",
+    "EventCode": "0xae",
+    "BriefDescription": "Cycles where a dispatch group is valid but does not get dispatched due to a token stall. Floating point register file resource stall. Applies to all FP ops that have a destination register.",
+    "UMask": "0x20"
+  },
+  {
+    "EventName": "de_dis_dispatch_token_stalls1.taken_branch_buffer_rsrc_stall",
+    "EventCode": "0xae",
+    "BriefDescription": "Cycles where a dispatch group is valid but does not get dispatched due to a token stall. Taken branch buffer resource stall.",
+    "UMask": "0x10"
+  },
+  {
+    "EventName": "de_dis_dispatch_token_stalls1.int_sched_misc_token_stall",
+    "EventCode": "0xae",
+    "BriefDescription": "Cycles where a dispatch group is valid but does not get dispatched due to a token stall. Integer Scheduler miscellaneous resource stall.",
+    "UMask": "0x8"
+  },
+  {
+    "EventName": "de_dis_dispatch_token_stalls1.store_queue_token_stall",
+    "EventCode": "0xae",
+    "BriefDescription": "Cycles where a dispatch group is valid but does not get dispatched due to a token stall. Store queue resource stall. Applies to all ops with store semantics.",
+    "UMask": "0x4"
+  },
+  {
+    "EventName": "de_dis_dispatch_token_stalls1.load_queue_token_stall",
+    "EventCode": "0xae",
+    "BriefDescription": "Cycles where a dispatch group is valid but does not get dispatched due to a token stall. Load queue resource stall. Applies to all ops with load semantics.",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "de_dis_dispatch_token_stalls1.int_phy_reg_file_token_stall",
+    "EventCode": "0xae",
+    "BriefDescription": "Cycles where a dispatch group is valid but does not get dispatched due to a token stall. Integer Physical Register File resource stall. Applies to all ops that have an integer destination register.",
+    "UMask": "0x1"
+  },
+  {
+    "EventName": "de_dis_dispatch_token_stalls0.sc_agu_dispatch_stall",
+    "EventCode": "0xaf",
+    "BriefDescription": "Cycles where a dispatch group is valid but does not get dispatched due to a token stall. SC AGU dispatch stall.",
+    "UMask": "0x40"
+  },
+  {
+    "EventName": "de_dis_dispatch_token_stalls0.retire_token_stall",
+    "EventCode": "0xaf",
+    "BriefDescription": "Cycles where a dispatch group is valid but does not get dispatched due to a token stall. RETIRE Tokens unavailable.",
+    "UMask": "0x20"
+  },
+  {
+    "EventName": "de_dis_dispatch_token_stalls0.agsq_token_stall",
+    "EventCode": "0xaf",
+    "BriefDescription": "Cycles where a dispatch group is valid but does not get dispatched due to a token stall. AGSQ Tokens unavailable.",
+    "UMask": "0x10"
+  },
+  {
+    "EventName": "de_dis_dispatch_token_stalls0.alu_token_stall",
+    "EventCode": "0xaf",
+    "BriefDescription": "Cycles where a dispatch group is valid but does not get dispatched due to a token stall. ALU tokens total unavailable.",
+    "UMask": "0x8"
+  },
+  {
+    "EventName": "de_dis_dispatch_token_stalls0.alsq3_0_token_stall",
+    "EventCode": "0xaf",
+    "BriefDescription": "Cycles where a dispatch group is valid but does not get dispatched due to a token stall. ALSQ3_0_TokenStall.",
+    "UMask": "0x4"
+  },
+  {
+    "EventName": "de_dis_dispatch_token_stalls0.alsq2_token_stall",
+    "EventCode": "0xaf",
+    "BriefDescription": "Cycles where a dispatch group is valid but does not get dispatched due to a token stall. ALSQ 2 Tokens unavailable.",
+    "UMask": "0x2"
+  },
+  {
+    "EventName": "de_dis_dispatch_token_stalls0.alsq1_token_stall",
+    "EventCode": "0xaf",
+    "BriefDescription": "Cycles where a dispatch group is valid but does not get dispatched due to a token stall. ALSQ 1 Tokens unavailable.",
+    "UMask": "0x1"
+  }
+]
diff --git a/tools/perf/pmu-events/arch/x86/broadwell/bdw-metrics.json b/tools/perf/pmu-events/arch/x86/broadwell/bdw-metrics.json
index 45a34ce..8cdc7c1 100644
--- a/tools/perf/pmu-events/arch/x86/broadwell/bdw-metrics.json
+++ b/tools/perf/pmu-events/arch/x86/broadwell/bdw-metrics.json
@@ -297,7 +297,7 @@
     },
     {
         "BriefDescription": "Fraction of cycles spent in Kernel mode",
-        "MetricExpr": "CPU_CLK_UNHALTED.REF_TSC:k / CPU_CLK_UNHALTED.REF_TSC",
+        "MetricExpr": "CPU_CLK_UNHALTED.THREAD:k / CPU_CLK_UNHALTED.THREAD",
         "MetricGroup": "Summary",
         "MetricName": "Kernel_Utilization"
     },
diff --git a/tools/perf/pmu-events/arch/x86/broadwellde/bdwde-metrics.json b/tools/perf/pmu-events/arch/x86/broadwellde/bdwde-metrics.json
index 961fe4395..16fd8a7 100644
--- a/tools/perf/pmu-events/arch/x86/broadwellde/bdwde-metrics.json
+++ b/tools/perf/pmu-events/arch/x86/broadwellde/bdwde-metrics.json
@@ -115,7 +115,7 @@
     },
     {
         "BriefDescription": "Fraction of cycles spent in Kernel mode",
-        "MetricExpr": "CPU_CLK_UNHALTED.REF_TSC:k / CPU_CLK_UNHALTED.REF_TSC",
+        "MetricExpr": "CPU_CLK_UNHALTED.THREAD:k / CPU_CLK_UNHALTED.THREAD",
         "MetricGroup": "Summary",
         "MetricName": "Kernel_Utilization"
     },
diff --git a/tools/perf/pmu-events/arch/x86/broadwellx/bdx-metrics.json b/tools/perf/pmu-events/arch/x86/broadwellx/bdx-metrics.json
index 746734c..1eb0415 100644
--- a/tools/perf/pmu-events/arch/x86/broadwellx/bdx-metrics.json
+++ b/tools/perf/pmu-events/arch/x86/broadwellx/bdx-metrics.json
@@ -297,7 +297,7 @@
     },
     {
         "BriefDescription": "Fraction of cycles spent in Kernel mode",
-        "MetricExpr": "CPU_CLK_UNHALTED.REF_TSC:k / CPU_CLK_UNHALTED.REF_TSC",
+        "MetricExpr": "CPU_CLK_UNHALTED.THREAD:k / CPU_CLK_UNHALTED.THREAD",
         "MetricGroup": "Summary",
         "MetricName": "Kernel_Utilization"
     },
diff --git a/tools/perf/pmu-events/arch/x86/cascadelakex/clx-metrics.json b/tools/perf/pmu-events/arch/x86/cascadelakex/clx-metrics.json
index a728c6e..7fde0d2 100644
--- a/tools/perf/pmu-events/arch/x86/cascadelakex/clx-metrics.json
+++ b/tools/perf/pmu-events/arch/x86/cascadelakex/clx-metrics.json
@@ -316,7 +316,7 @@
     },
     {
         "BriefDescription": "Fraction of cycles spent in Kernel mode",
-        "MetricExpr": "CPU_CLK_UNHALTED.REF_TSC:k / CPU_CLK_UNHALTED.REF_TSC",
+        "MetricExpr": "CPU_CLK_UNHALTED.THREAD:k / CPU_CLK_UNHALTED.THREAD",
         "MetricGroup": "Summary",
         "MetricName": "Kernel_Utilization"
     },
diff --git a/tools/perf/pmu-events/arch/x86/haswell/hsw-metrics.json b/tools/perf/pmu-events/arch/x86/haswell/hsw-metrics.json
index 5402cd3..f57c5f3 100644
--- a/tools/perf/pmu-events/arch/x86/haswell/hsw-metrics.json
+++ b/tools/perf/pmu-events/arch/x86/haswell/hsw-metrics.json
@@ -267,7 +267,7 @@
     },
     {
         "BriefDescription": "Fraction of cycles spent in Kernel mode",
-        "MetricExpr": "CPU_CLK_UNHALTED.REF_TSC:k / CPU_CLK_UNHALTED.REF_TSC",
+        "MetricExpr": "CPU_CLK_UNHALTED.THREAD:k / CPU_CLK_UNHALTED.THREAD",
         "MetricGroup": "Summary",
         "MetricName": "Kernel_Utilization"
     },
diff --git a/tools/perf/pmu-events/arch/x86/haswellx/hsx-metrics.json b/tools/perf/pmu-events/arch/x86/haswellx/hsx-metrics.json
index 832f3cb..311a005 100644
--- a/tools/perf/pmu-events/arch/x86/haswellx/hsx-metrics.json
+++ b/tools/perf/pmu-events/arch/x86/haswellx/hsx-metrics.json
@@ -267,7 +267,7 @@
     },
     {
         "BriefDescription": "Fraction of cycles spent in Kernel mode",
-        "MetricExpr": "CPU_CLK_UNHALTED.REF_TSC:k / CPU_CLK_UNHALTED.REF_TSC",
+        "MetricExpr": "CPU_CLK_UNHALTED.THREAD:k / CPU_CLK_UNHALTED.THREAD",
         "MetricGroup": "Summary",
         "MetricName": "Kernel_Utilization"
     },
diff --git a/tools/perf/pmu-events/arch/x86/ivybridge/ivb-metrics.json b/tools/perf/pmu-events/arch/x86/ivybridge/ivb-metrics.json
index d69b2a8..28e2544 100644
--- a/tools/perf/pmu-events/arch/x86/ivybridge/ivb-metrics.json
+++ b/tools/perf/pmu-events/arch/x86/ivybridge/ivb-metrics.json
@@ -285,7 +285,7 @@
     },
     {
         "BriefDescription": "Fraction of cycles spent in Kernel mode",
-        "MetricExpr": "CPU_CLK_UNHALTED.REF_TSC:k / CPU_CLK_UNHALTED.REF_TSC",
+        "MetricExpr": "CPU_CLK_UNHALTED.THREAD:k / CPU_CLK_UNHALTED.THREAD",
         "MetricGroup": "Summary",
         "MetricName": "Kernel_Utilization"
     },
diff --git a/tools/perf/pmu-events/arch/x86/ivytown/ivt-metrics.json b/tools/perf/pmu-events/arch/x86/ivytown/ivt-metrics.json
index 5f465fd..db23db2 100644
--- a/tools/perf/pmu-events/arch/x86/ivytown/ivt-metrics.json
+++ b/tools/perf/pmu-events/arch/x86/ivytown/ivt-metrics.json
@@ -285,7 +285,7 @@
     },
     {
         "BriefDescription": "Fraction of cycles spent in Kernel mode",
-        "MetricExpr": "CPU_CLK_UNHALTED.REF_TSC:k / CPU_CLK_UNHALTED.REF_TSC",
+        "MetricExpr": "CPU_CLK_UNHALTED.THREAD:k / CPU_CLK_UNHALTED.THREAD",
         "MetricGroup": "Summary",
         "MetricName": "Kernel_Utilization"
     },
diff --git a/tools/perf/pmu-events/arch/x86/jaketown/jkt-metrics.json b/tools/perf/pmu-events/arch/x86/jaketown/jkt-metrics.json
index 3e909b3..dbb33e0 100644
--- a/tools/perf/pmu-events/arch/x86/jaketown/jkt-metrics.json
+++ b/tools/perf/pmu-events/arch/x86/jaketown/jkt-metrics.json
@@ -171,7 +171,7 @@
     },
     {
         "BriefDescription": "Fraction of cycles spent in Kernel mode",
-        "MetricExpr": "CPU_CLK_UNHALTED.REF_TSC:k / CPU_CLK_UNHALTED.REF_TSC",
+        "MetricExpr": "CPU_CLK_UNHALTED.THREAD:k / CPU_CLK_UNHALTED.THREAD",
         "MetricGroup": "Summary",
         "MetricName": "Kernel_Utilization"
     },
diff --git a/tools/perf/pmu-events/arch/x86/mapfile.csv b/tools/perf/pmu-events/arch/x86/mapfile.csv
index 745ced0..25b06cf 100644
--- a/tools/perf/pmu-events/arch/x86/mapfile.csv
+++ b/tools/perf/pmu-events/arch/x86/mapfile.csv
@@ -36,4 +36,5 @@
 GenuineIntel-6-7D,v1,icelake,core
 GenuineIntel-6-7E,v1,icelake,core
 GenuineIntel-6-86,v1,tremontx,core
-AuthenticAMD-23-[[:xdigit:]]+,v1,amdfam17h,core
+AuthenticAMD-23-([12][0-9A-F]|[0-9A-F]),v2,amdzen1,core
+AuthenticAMD-23-[[:xdigit:]]+,v1,amdzen2,core
diff --git a/tools/perf/pmu-events/arch/x86/sandybridge/snb-metrics.json b/tools/perf/pmu-events/arch/x86/sandybridge/snb-metrics.json
index 50c0532..fb2d7b8 100644
--- a/tools/perf/pmu-events/arch/x86/sandybridge/snb-metrics.json
+++ b/tools/perf/pmu-events/arch/x86/sandybridge/snb-metrics.json
@@ -171,7 +171,7 @@
     },
     {
         "BriefDescription": "Fraction of cycles spent in Kernel mode",
-        "MetricExpr": "CPU_CLK_UNHALTED.REF_TSC:k / CPU_CLK_UNHALTED.REF_TSC",
+        "MetricExpr": "CPU_CLK_UNHALTED.THREAD:k / CPU_CLK_UNHALTED.THREAD",
         "MetricGroup": "Summary",
         "MetricName": "Kernel_Utilization"
     },
diff --git a/tools/perf/pmu-events/arch/x86/skylake/skl-metrics.json b/tools/perf/pmu-events/arch/x86/skylake/skl-metrics.json
index f97e831..8704efe 100644
--- a/tools/perf/pmu-events/arch/x86/skylake/skl-metrics.json
+++ b/tools/perf/pmu-events/arch/x86/skylake/skl-metrics.json
@@ -304,7 +304,7 @@
     },
     {
         "BriefDescription": "Fraction of cycles spent in Kernel mode",
-        "MetricExpr": "CPU_CLK_UNHALTED.REF_TSC:k / CPU_CLK_UNHALTED.REF_TSC",
+        "MetricExpr": "CPU_CLK_UNHALTED.THREAD:k / CPU_CLK_UNHALTED.THREAD",
         "MetricGroup": "Summary",
         "MetricName": "Kernel_Utilization"
     },
diff --git a/tools/perf/pmu-events/arch/x86/skylakex/skx-metrics.json b/tools/perf/pmu-events/arch/x86/skylakex/skx-metrics.json
index 35f5db1..b4f9113 100644
--- a/tools/perf/pmu-events/arch/x86/skylakex/skx-metrics.json
+++ b/tools/perf/pmu-events/arch/x86/skylakex/skx-metrics.json
@@ -316,7 +316,7 @@
     },
     {
         "BriefDescription": "Fraction of cycles spent in Kernel mode",
-        "MetricExpr": "CPU_CLK_UNHALTED.REF_TSC:k / CPU_CLK_UNHALTED.REF_TSC",
+        "MetricExpr": "CPU_CLK_UNHALTED.THREAD:k / CPU_CLK_UNHALTED.THREAD",
         "MetricGroup": "Summary",
         "MetricName": "Kernel_Utilization"
     },
diff --git a/tools/perf/pmu-events/jevents.c b/tools/perf/pmu-events/jevents.c
index 3c4236a..fa86c5f 100644
--- a/tools/perf/pmu-events/jevents.c
+++ b/tools/perf/pmu-events/jevents.c
@@ -771,6 +771,19 @@ static void print_mapping_table_suffix(FILE *outfp)
 	fprintf(outfp, "};\n");
 }
 
+static void print_mapping_test_table(FILE *outfp)
+{
+	/*
+	 * Print the terminating, NULL entry.
+	 */
+	fprintf(outfp, "{\n");
+	fprintf(outfp, "\t.cpuid = \"testcpu\",\n");
+	fprintf(outfp, "\t.version = \"v1\",\n");
+	fprintf(outfp, "\t.type = \"core\",\n");
+	fprintf(outfp, "\t.table = pme_test_cpu,\n");
+	fprintf(outfp, "},\n");
+}
+
 static int process_mapfile(FILE *outfp, char *fpath)
 {
 	int n = 16384;
@@ -848,6 +861,7 @@ static int process_mapfile(FILE *outfp, char *fpath)
 	}
 
 out:
+	print_mapping_test_table(outfp);
 	print_mapping_table_suffix(outfp);
 	fclose(mapfp);
 	free(line);
@@ -1168,6 +1182,22 @@ int main(int argc, char *argv[])
 		goto empty_map;
 	}
 
+	sprintf(ldirname, "%s/test", start_dirname);
+
+	rc = nftw(ldirname, process_one_file, maxfds, 0);
+	if (rc && verbose) {
+		pr_info("%s: Error walking file tree %s rc=%d for test\n",
+			prog, ldirname, rc);
+		goto empty_map;
+	} else if (rc < 0) {
+		/* Make build fail */
+		free_arch_std_events();
+		ret = 1;
+		goto out_free_mapfile;
+	} else if (rc) {
+		goto empty_map;
+	}
+
 	if (close_table)
 		print_events_table_suffix(eventsfp);
 
diff --git a/tools/perf/tests/.gitignore b/tools/perf/tests/.gitignore
index 8cc30e7..d053b32 100644
--- a/tools/perf/tests/.gitignore
+++ b/tools/perf/tests/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 llvm-src-base.c
 llvm-src-kbuild.c
 llvm-src-prologue.c
diff --git a/tools/perf/tests/Build b/tools/perf/tests/Build
index 1692529..b3d1bf1 100644
--- a/tools/perf/tests/Build
+++ b/tools/perf/tests/Build
@@ -14,6 +14,7 @@
 perf-y += evsel-tp-sched.o
 perf-y += fdarray.o
 perf-y += pmu.o
+perf-y += pmu-events.o
 perf-y += hists_common.o
 perf-y += hists_link.o
 perf-y += hists_filter.o
diff --git a/tools/perf/tests/builtin-test.c b/tools/perf/tests/builtin-test.c
index 54d9516..b6322eb 100644
--- a/tools/perf/tests/builtin-test.c
+++ b/tools/perf/tests/builtin-test.c
@@ -73,6 +73,10 @@ static struct test generic_tests[] = {
 		.func = test__pmu,
 	},
 	{
+		.desc = "PMU events",
+		.func = test__pmu_events,
+	},
+	{
 		.desc = "DSO data read",
 		.func = test__dso_data,
 	},
diff --git a/tools/perf/tests/make b/tools/perf/tests/make
index c850d16..5d0c3a9 100644
--- a/tools/perf/tests/make
+++ b/tools/perf/tests/make
@@ -28,9 +28,13 @@
 
 PARALLEL_OPT=
 ifeq ($(SET_PARALLEL),1)
-  cores := $(shell (getconf _NPROCESSORS_ONLN || egrep -c '^processor|^CPU[0-9]' /proc/cpuinfo) 2>/dev/null)
-  ifeq ($(cores),0)
-    cores := 1
+  ifeq ($(JOBS),)
+    cores := $(shell (getconf _NPROCESSORS_ONLN || egrep -c '^processor|^CPU[0-9]' /proc/cpuinfo) 2>/dev/null)
+    ifeq ($(cores),0)
+      cores := 1
+    endif
+  else
+    cores=$(JOBS)
   endif
   PARALLEL_OPT="-j$(cores)"
 endif
diff --git a/tools/perf/tests/pmu-events.c b/tools/perf/tests/pmu-events.c
new file mode 100644
index 0000000..d64261d
--- /dev/null
+++ b/tools/perf/tests/pmu-events.c
@@ -0,0 +1,379 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "parse-events.h"
+#include "pmu.h"
+#include "tests.h"
+#include <errno.h>
+#include <stdio.h>
+#include <linux/kernel.h>
+#include <linux/zalloc.h>
+#include "debug.h"
+#include "../pmu-events/pmu-events.h"
+
+struct perf_pmu_test_event {
+	struct pmu_event event;
+
+	/* extra events for aliases */
+	const char *alias_str;
+
+	/*
+	 * Note: For when PublicDescription does not exist in the JSON, we
+	 * will have no long_desc in pmu_event.long_desc, but long_desc may
+	 * be set in the alias.
+	 */
+	const char *alias_long_desc;
+};
+
+static struct perf_pmu_test_event test_cpu_events[] = {
+	{
+		.event = {
+			.name = "bp_l1_btb_correct",
+			.event = "event=0x8a",
+			.desc = "L1 BTB Correction",
+			.topic = "branch",
+		},
+		.alias_str = "event=0x8a",
+		.alias_long_desc = "L1 BTB Correction",
+	},
+	{
+		.event = {
+			.name = "bp_l2_btb_correct",
+			.event = "event=0x8b",
+			.desc = "L2 BTB Correction",
+			.topic = "branch",
+		},
+		.alias_str = "event=0x8b",
+		.alias_long_desc = "L2 BTB Correction",
+	},
+	{
+		.event = {
+			.name = "segment_reg_loads.any",
+			.event = "umask=0x80,period=200000,event=0x6",
+			.desc = "Number of segment register loads",
+			.topic = "other",
+		},
+		.alias_str = "umask=0x80,(null)=0x30d40,event=0x6",
+		.alias_long_desc = "Number of segment register loads",
+	},
+	{
+		.event = {
+			.name = "dispatch_blocked.any",
+			.event = "umask=0x20,period=200000,event=0x9",
+			.desc = "Memory cluster signals to block micro-op dispatch for any reason",
+			.topic = "other",
+		},
+		.alias_str = "umask=0x20,(null)=0x30d40,event=0x9",
+		.alias_long_desc = "Memory cluster signals to block micro-op dispatch for any reason",
+	},
+	{
+		.event = {
+			.name = "eist_trans",
+			.event = "umask=0x0,period=200000,event=0x3a",
+			.desc = "Number of Enhanced Intel SpeedStep(R) Technology (EIST) transitions",
+			.topic = "other",
+		},
+		.alias_str = "umask=0,(null)=0x30d40,event=0x3a",
+		.alias_long_desc = "Number of Enhanced Intel SpeedStep(R) Technology (EIST) transitions",
+	},
+	{ /* sentinel */
+		.event = {
+			.name = NULL,
+		},
+	},
+};
+
+static struct perf_pmu_test_event test_uncore_events[] = {
+	{
+		.event = {
+			.name = "uncore_hisi_ddrc.flux_wcmd",
+			.event = "event=0x2",
+			.desc = "DDRC write commands. Unit: hisi_sccl,ddrc ",
+			.topic = "uncore",
+			.long_desc = "DDRC write commands",
+			.pmu = "hisi_sccl,ddrc",
+		},
+		.alias_str = "event=0x2",
+		.alias_long_desc = "DDRC write commands",
+	},
+	{
+		.event = {
+			.name = "unc_cbo_xsnp_response.miss_eviction",
+			.event = "umask=0x81,event=0x22",
+			.desc = "Unit: uncore_cbox A cross-core snoop resulted from L3 Eviction which misses in some processor core",
+			.topic = "uncore",
+			.long_desc = "A cross-core snoop resulted from L3 Eviction which misses in some processor core",
+			.pmu = "uncore_cbox",
+		},
+		.alias_str = "umask=0x81,event=0x22",
+		.alias_long_desc = "A cross-core snoop resulted from L3 Eviction which misses in some processor core",
+	},
+	{ /* sentinel */
+		.event = {
+			.name = NULL,
+		},
+	}
+};
+
+const int total_test_events_size = ARRAY_SIZE(test_uncore_events);
+
+static bool is_same(const char *reference, const char *test)
+{
+	if (!reference && !test)
+		return true;
+
+	if (reference && !test)
+		return false;
+
+	if (!reference && test)
+		return false;
+
+	return !strcmp(reference, test);
+}
+
+static struct pmu_events_map *__test_pmu_get_events_map(void)
+{
+	struct pmu_events_map *map;
+
+	for (map = &pmu_events_map[0]; map->cpuid; map++) {
+		if (!strcmp(map->cpuid, "testcpu"))
+			return map;
+	}
+
+	pr_err("could not find test events map\n");
+
+	return NULL;
+}
+
+/* Verify generated events from pmu-events.c is as expected */
+static int __test_pmu_event_table(void)
+{
+	struct pmu_events_map *map = __test_pmu_get_events_map();
+	struct pmu_event *table;
+	int map_events = 0, expected_events;
+
+	/* ignore 2x sentinels */
+	expected_events = ARRAY_SIZE(test_cpu_events) +
+			  ARRAY_SIZE(test_uncore_events) - 2;
+
+	if (!map)
+		return -1;
+
+	for (table = map->table; table->name; table++) {
+		struct perf_pmu_test_event *test;
+		struct pmu_event *te;
+		bool found = false;
+
+		if (table->pmu)
+			test = &test_uncore_events[0];
+		else
+			test = &test_cpu_events[0];
+
+		te = &test->event;
+
+		for (; te->name; test++, te = &test->event) {
+			if (strcmp(table->name, te->name))
+				continue;
+			found = true;
+			map_events++;
+
+			if (!is_same(table->desc, te->desc)) {
+				pr_debug2("testing event table %s: mismatched desc, %s vs %s\n",
+					  table->name, table->desc, te->desc);
+				return -1;
+			}
+
+			if (!is_same(table->topic, te->topic)) {
+				pr_debug2("testing event table %s: mismatched topic, %s vs %s\n",
+					  table->name, table->topic,
+					  te->topic);
+				return -1;
+			}
+
+			if (!is_same(table->long_desc, te->long_desc)) {
+				pr_debug2("testing event table %s: mismatched long_desc, %s vs %s\n",
+					  table->name, table->long_desc,
+					  te->long_desc);
+				return -1;
+			}
+
+			if (!is_same(table->unit, te->unit)) {
+				pr_debug2("testing event table %s: mismatched unit, %s vs %s\n",
+					  table->name, table->unit,
+					  te->unit);
+				return -1;
+			}
+
+			if (!is_same(table->perpkg, te->perpkg)) {
+				pr_debug2("testing event table %s: mismatched perpkg, %s vs %s\n",
+					  table->name, table->perpkg,
+					  te->perpkg);
+				return -1;
+			}
+
+			if (!is_same(table->metric_expr, te->metric_expr)) {
+				pr_debug2("testing event table %s: mismatched metric_expr, %s vs %s\n",
+					  table->name, table->metric_expr,
+					  te->metric_expr);
+				return -1;
+			}
+
+			if (!is_same(table->metric_name, te->metric_name)) {
+				pr_debug2("testing event table %s: mismatched metric_name, %s vs %s\n",
+					  table->name,  table->metric_name,
+					  te->metric_name);
+				return -1;
+			}
+
+			if (!is_same(table->deprecated, te->deprecated)) {
+				pr_debug2("testing event table %s: mismatched deprecated, %s vs %s\n",
+					  table->name, table->deprecated,
+					  te->deprecated);
+				return -1;
+			}
+
+			pr_debug("testing event table %s: pass\n", table->name);
+		}
+
+		if (!found) {
+			pr_err("testing event table: could not find event %s\n",
+			       table->name);
+			return -1;
+		}
+	}
+
+	if (map_events != expected_events) {
+		pr_err("testing event table: found %d, but expected %d\n",
+		       map_events, expected_events);
+		return -1;
+	}
+
+	return 0;
+}
+
+static struct perf_pmu_alias *find_alias(const char *test_event, struct list_head *aliases)
+{
+	struct perf_pmu_alias *alias;
+
+	list_for_each_entry(alias, aliases, list)
+		if (!strcmp(test_event, alias->name))
+			return alias;
+
+	return NULL;
+}
+
+/* Verify aliases are as expected */
+static int __test__pmu_event_aliases(char *pmu_name, int *count)
+{
+	struct perf_pmu_test_event *test;
+	struct pmu_event *te;
+	struct perf_pmu *pmu;
+	LIST_HEAD(aliases);
+	int res = 0;
+	bool use_uncore_table;
+	struct pmu_events_map *map = __test_pmu_get_events_map();
+
+	if (!map)
+		return -1;
+
+	if (is_pmu_core(pmu_name)) {
+		test = &test_cpu_events[0];
+		use_uncore_table = false;
+	} else {
+		test = &test_uncore_events[0];
+		use_uncore_table = true;
+	}
+
+	pmu = zalloc(sizeof(*pmu));
+	if (!pmu)
+		return -1;
+
+	pmu->name = pmu_name;
+
+	pmu_add_cpu_aliases_map(&aliases, pmu, map);
+
+	for (te = &test->event; te->name; test++, te = &test->event) {
+		struct perf_pmu_alias *alias = find_alias(te->name, &aliases);
+
+		if (!alias) {
+			bool uncore_match = pmu_uncore_alias_match(pmu_name,
+								   te->pmu);
+
+			if (use_uncore_table && !uncore_match) {
+				pr_debug3("testing aliases PMU %s: skip matching alias %s\n",
+					  pmu_name, te->name);
+				continue;
+			}
+
+			pr_debug2("testing aliases PMU %s: no alias, alias_table->name=%s\n",
+				  pmu_name, te->name);
+			res = -1;
+			break;
+		}
+
+		if (!is_same(alias->desc, te->desc)) {
+			pr_debug2("testing aliases PMU %s: mismatched desc, %s vs %s\n",
+				  pmu_name, alias->desc, te->desc);
+			res = -1;
+			break;
+		}
+
+		if (!is_same(alias->long_desc, test->alias_long_desc)) {
+			pr_debug2("testing aliases PMU %s: mismatched long_desc, %s vs %s\n",
+				  pmu_name, alias->long_desc,
+				  test->alias_long_desc);
+			res = -1;
+			break;
+		}
+
+		if (!is_same(alias->str, test->alias_str)) {
+			pr_debug2("testing aliases PMU %s: mismatched str, %s vs %s\n",
+				  pmu_name, alias->str, test->alias_str);
+			res = -1;
+			break;
+		}
+
+		if (!is_same(alias->topic, te->topic)) {
+			pr_debug2("testing aliases PMU %s: mismatched topic, %s vs %s\n",
+				  pmu_name, alias->topic, te->topic);
+			res = -1;
+			break;
+		}
+
+		(*count)++;
+		pr_debug2("testing aliases PMU %s: matched event %s\n",
+			  pmu_name, alias->name);
+	}
+
+	free(pmu);
+	return res;
+}
+
+int test__pmu_events(struct test *test __maybe_unused,
+		     int subtest __maybe_unused)
+{
+	struct perf_pmu *pmu = NULL;
+
+	if (__test_pmu_event_table())
+		return -1;
+
+	while ((pmu = perf_pmu__scan(pmu)) != NULL) {
+		int count = 0;
+
+		if (list_empty(&pmu->format)) {
+			pr_debug2("skipping testing PMU %s\n", pmu->name);
+			continue;
+		}
+
+		if (__test__pmu_event_aliases(pmu->name, &count)) {
+			pr_debug("testing PMU %s aliases: failed\n", pmu->name);
+			return -1;
+		}
+
+		if (count == 0)
+			pr_debug3("testing PMU %s aliases: no events to match\n",
+				  pmu->name);
+		else
+			pr_debug("testing PMU %s aliases: pass\n", pmu->name);
+	}
+
+	return 0;
+}
diff --git a/tools/perf/tests/sample-parsing.c b/tools/perf/tests/sample-parsing.c
index 14239e4..6186569 100644
--- a/tools/perf/tests/sample-parsing.c
+++ b/tools/perf/tests/sample-parsing.c
@@ -151,6 +151,9 @@ static bool samples_same(const struct perf_sample *s1,
 	if (type & PERF_SAMPLE_PHYS_ADDR)
 		COMP(phys_addr);
 
+	if (type & PERF_SAMPLE_CGROUP)
+		COMP(cgroup);
+
 	if (type & PERF_SAMPLE_AUX) {
 		COMP(aux_sample.size);
 		if (memcmp(s1->aux_sample.data, s2->aux_sample.data,
@@ -230,6 +233,7 @@ static int do_test(u64 sample_type, u64 sample_regs, u64 read_format)
 			.regs	= regs,
 		},
 		.phys_addr	= 113,
+		.cgroup		= 114,
 		.aux_sample	= {
 			.size	= sizeof(aux_data),
 			.data	= (void *)aux_data,
@@ -336,7 +340,7 @@ int test__sample_parsing(struct test *test __maybe_unused, int subtest __maybe_u
 	 * were added.  Please actually update the test rather than just change
 	 * the condition below.
 	 */
-	if (PERF_SAMPLE_MAX > PERF_SAMPLE_AUX << 1) {
+	if (PERF_SAMPLE_MAX > PERF_SAMPLE_CGROUP << 1) {
 		pr_debug("sample format has changed, some new PERF_SAMPLE_ bit was introduced - test needs updating\n");
 		return -1;
 	}
diff --git a/tools/perf/tests/tests.h b/tools/perf/tests/tests.h
index 9a160fe..61a1ab0 100644
--- a/tools/perf/tests/tests.h
+++ b/tools/perf/tests/tests.h
@@ -49,6 +49,7 @@ int test__perf_evsel__roundtrip_name_test(struct test *test, int subtest);
 int test__perf_evsel__tp_sched_test(struct test *test, int subtest);
 int test__syscall_openat_tp_fields(struct test *test, int subtest);
 int test__pmu(struct test *test, int subtest);
+int test__pmu_events(struct test *test, int subtest);
 int test__attr(struct test *test, int subtest);
 int test__dso_data(struct test *test, int subtest);
 int test__dso_data_cache(struct test *test, int subtest);
diff --git a/tools/perf/trace/beauty/clone.c b/tools/perf/trace/beauty/clone.c
index 062ca84..f4db894 100644
--- a/tools/perf/trace/beauty/clone.c
+++ b/tools/perf/trace/beauty/clone.c
@@ -46,6 +46,7 @@ static size_t clone__scnprintf_flags(unsigned long flags, char *bf, size_t size,
 	P_FLAG(NEWNET);
 	P_FLAG(IO);
 	P_FLAG(CLEAR_SIGHAND);
+	P_FLAG(INTO_CGROUP);
 #undef P_FLAG
 
 	if (flags)
diff --git a/tools/perf/trace/beauty/mmap.c b/tools/perf/trace/beauty/mmap.c
index 9fa771a..862c833 100644
--- a/tools/perf/trace/beauty/mmap.c
+++ b/tools/perf/trace/beauty/mmap.c
@@ -69,6 +69,7 @@ static size_t syscall_arg__scnprintf_mremap_flags(char *bf, size_t size,
 
 	P_MREMAP_FLAG(MAYMOVE);
 	P_MREMAP_FLAG(FIXED);
+	P_MREMAP_FLAG(DONTUNMAP);
 #undef P_MREMAP_FLAG
 
 	if (flags)
diff --git a/tools/perf/ui/browsers/hists.c b/tools/perf/ui/browsers/hists.c
index f36dee4..487e54e 100644
--- a/tools/perf/ui/browsers/hists.c
+++ b/tools/perf/ui/browsers/hists.c
@@ -677,7 +677,7 @@ static int hist_browser__title(struct hist_browser *browser, char *bf, size_t si
 	return browser->title ? browser->title(browser, bf, size) : 0;
 }
 
-static int hist_browser__handle_hotkey(struct hist_browser *browser, bool warn_lost_event, char *title, int key)
+static int hist_browser__handle_hotkey(struct hist_browser *browser, bool warn_lost_event, char *title, size_t size, int key)
 {
 	switch (key) {
 	case K_TIMER: {
@@ -703,7 +703,7 @@ static int hist_browser__handle_hotkey(struct hist_browser *browser, bool warn_l
 			ui_browser__warn_lost_events(&browser->b);
 		}
 
-		hist_browser__title(browser, title, sizeof(title));
+		hist_browser__title(browser, title, size);
 		ui_browser__show_title(&browser->b, title);
 		break;
 	}
@@ -764,13 +764,13 @@ int hist_browser__run(struct hist_browser *browser, const char *help,
 	if (ui_browser__show(&browser->b, title, "%s", help) < 0)
 		return -1;
 
-	if (key && hist_browser__handle_hotkey(browser, warn_lost_event, title, key))
+	if (key && hist_browser__handle_hotkey(browser, warn_lost_event, title, sizeof(title), key))
 		goto out;
 
 	while (1) {
 		key = ui_browser__run(&browser->b, delay_secs);
 
-		if (hist_browser__handle_hotkey(browser, warn_lost_event, title, key))
+		if (hist_browser__handle_hotkey(browser, warn_lost_event, title, sizeof(title), key))
 			break;
 	}
 out:
@@ -2465,13 +2465,41 @@ do_annotate(struct hist_browser *browser, struct popup_action *act)
 	return 0;
 }
 
+static struct symbol *symbol__new_unresolved(u64 addr, struct map *map)
+{
+	struct annotated_source *src;
+	struct symbol *sym;
+	char name[64];
+
+	snprintf(name, sizeof(name), "%.*" PRIx64, BITS_PER_LONG / 4, addr);
+
+	sym = symbol__new(addr, ANNOTATION_DUMMY_LEN, 0, 0, name);
+	if (sym) {
+		src = symbol__hists(sym, 1);
+		if (!src) {
+			symbol__delete(sym);
+			return NULL;
+		}
+
+		dso__insert_symbol(map->dso, sym);
+	}
+
+	return sym;
+}
+
 static int
 add_annotate_opt(struct hist_browser *browser __maybe_unused,
 		 struct popup_action *act, char **optstr,
-		 struct map_symbol *ms)
+		 struct map_symbol *ms,
+		 u64 addr)
 {
-	if (ms->sym == NULL || ms->map->dso->annotate_warned ||
-	    symbol__annotation(ms->sym)->src == NULL)
+	if (!ms->map || !ms->map->dso || ms->map->dso->annotate_warned)
+		return 0;
+
+	if (!ms->sym)
+		ms->sym = symbol__new_unresolved(addr, ms->map);
+
+	if (ms->sym == NULL || symbol__annotation(ms->sym)->src == NULL)
 		return 0;
 
 	if (asprintf(optstr, "Annotate %s", ms->sym->name) < 0)
@@ -2964,7 +2992,8 @@ static int perf_evsel__hists_browse(struct evsel *evsel, int nr_events,
 	"s             Switch to another data file in PWD\n"
 	"t             Zoom into current Thread\n"
 	"V             Verbose (DSO names in callchains, etc)\n"
-	"/             Filter symbol by name";
+	"/             Filter symbol by name\n"
+	"0-9           Sort by event n in group";
 	static const char top_help[] = HIST_BROWSER_HELP_COMMON
 	"P             Print histograms to perf.hist.N\n"
 	"t             Zoom into current Thread\n"
@@ -3025,6 +3054,31 @@ static int perf_evsel__hists_browse(struct evsel *evsel, int nr_events,
 			 * go to the next or previous
 			 */
 			goto out_free_stack;
+		case '0' ... '9':
+			if (!symbol_conf.event_group ||
+			    evsel->core.nr_members < 2) {
+				snprintf(buf, sizeof(buf),
+					 "Sort by index only available with group events!");
+				helpline = buf;
+				continue;
+			}
+
+			if (key - '0' == symbol_conf.group_sort_idx)
+				continue;
+
+			symbol_conf.group_sort_idx = key - '0';
+
+			if (symbol_conf.group_sort_idx >= evsel->core.nr_members) {
+				snprintf(buf, sizeof(buf),
+					 "Max event group index to sort is %d (index from 0 to %d)",
+					 evsel->core.nr_members - 1,
+					 evsel->core.nr_members - 1);
+				helpline = buf;
+				continue;
+			}
+
+			key = K_RELOAD;
+			goto out_free_stack;
 		case 'a':
 			if (!hists__has(hists, sym)) {
 				ui_browser__warning(&browser->b, delay_secs * 2,
@@ -3033,21 +3087,45 @@ static int perf_evsel__hists_browse(struct evsel *evsel, int nr_events,
 				continue;
 			}
 
-			if (browser->selection == NULL ||
-			    browser->selection->sym == NULL ||
-			    browser->selection->map->dso->annotate_warned)
-				continue;
-
-			if (symbol__annotation(browser->selection->sym)->src == NULL) {
-				ui_browser__warning(&browser->b, delay_secs * 2,
-						    "No samples for the \"%s\" symbol.\n\n"
-						    "Probably appeared just in a callchain",
-						    browser->selection->sym->name);
+			if (!browser->selection ||
+			    !browser->selection->map ||
+			    !browser->selection->map->dso ||
+			    browser->selection->map->dso->annotate_warned) {
 				continue;
 			}
 
-			actions->ms.map = browser->selection->map;
-			actions->ms.sym = browser->selection->sym;
+			if (!browser->selection->sym) {
+				if (!browser->he_selection)
+					continue;
+
+				if (sort__mode == SORT_MODE__BRANCH) {
+					bi = browser->he_selection->branch_info;
+					if (!bi || !bi->to.ms.map)
+						continue;
+
+					actions->ms.sym = symbol__new_unresolved(bi->to.al_addr, bi->to.ms.map);
+					actions->ms.map = bi->to.ms.map;
+				} else {
+					actions->ms.sym = symbol__new_unresolved(browser->he_selection->ip,
+										 browser->selection->map);
+					actions->ms.map = browser->selection->map;
+				}
+
+				if (!actions->ms.sym)
+					continue;
+			} else {
+				if (symbol__annotation(browser->selection->sym)->src == NULL) {
+					ui_browser__warning(&browser->b, delay_secs * 2,
+						"No samples for the \"%s\" symbol.\n\n"
+						"Probably appeared just in a callchain",
+						browser->selection->sym->name);
+					continue;
+				}
+
+				actions->ms.map = browser->selection->map;
+				actions->ms.sym = browser->selection->sym;
+			}
+
 			do_annotate(browser, actions);
 			continue;
 		case 'P':
@@ -3219,17 +3297,20 @@ static int perf_evsel__hists_browse(struct evsel *evsel, int nr_events,
 			nr_options += add_annotate_opt(browser,
 						       &actions[nr_options],
 						       &options[nr_options],
-						       &bi->from.ms);
+						       &bi->from.ms,
+						       bi->from.al_addr);
 			if (bi->to.ms.sym != bi->from.ms.sym)
 				nr_options += add_annotate_opt(browser,
 							&actions[nr_options],
 							&options[nr_options],
-							&bi->to.ms);
+							&bi->to.ms,
+							bi->to.al_addr);
 		} else {
 			nr_options += add_annotate_opt(browser,
 						       &actions[nr_options],
 						       &options[nr_options],
-						       browser->selection);
+						       browser->selection,
+						       browser->he_selection->ip);
 		}
 skip_annotation:
 		nr_options += add_thread_opt(browser, &actions[nr_options],
@@ -3440,6 +3521,7 @@ static int perf_evsel_menu__run(struct evsel_menu *menu,
 					pos = perf_evsel__prev(pos);
 				goto browse_hists;
 			case K_SWITCH_INPUT_DATA:
+			case K_RELOAD:
 			case 'q':
 			case CTRL('c'):
 				goto out;
diff --git a/tools/perf/ui/hist.c b/tools/perf/ui/hist.c
index f736755..025f4c7 100644
--- a/tools/perf/ui/hist.c
+++ b/tools/perf/ui/hist.c
@@ -151,15 +151,90 @@ static int field_cmp(u64 field_a, u64 field_b)
 	return 0;
 }
 
+static int hist_entry__new_pair(struct hist_entry *a, struct hist_entry *b,
+				hpp_field_fn get_field, int nr_members,
+				u64 **fields_a, u64 **fields_b)
+{
+	u64 *fa = calloc(nr_members, sizeof(*fa)),
+	    *fb = calloc(nr_members, sizeof(*fb));
+	struct hist_entry *pair;
+
+	if (!fa || !fb)
+		goto out_free;
+
+	list_for_each_entry(pair, &a->pairs.head, pairs.node) {
+		struct evsel *evsel = hists_to_evsel(pair->hists);
+		fa[perf_evsel__group_idx(evsel)] = get_field(pair);
+	}
+
+	list_for_each_entry(pair, &b->pairs.head, pairs.node) {
+		struct evsel *evsel = hists_to_evsel(pair->hists);
+		fb[perf_evsel__group_idx(evsel)] = get_field(pair);
+	}
+
+	*fields_a = fa;
+	*fields_b = fb;
+	return 0;
+out_free:
+	free(fa);
+	free(fb);
+	*fields_a = *fields_b = NULL;
+	return -1;
+}
+
+static int __hpp__group_sort_idx(struct hist_entry *a, struct hist_entry *b,
+				 hpp_field_fn get_field, int idx)
+{
+	struct evsel *evsel = hists_to_evsel(a->hists);
+	u64 *fields_a, *fields_b;
+	int cmp, nr_members, ret, i;
+
+	cmp = field_cmp(get_field(a), get_field(b));
+	if (!perf_evsel__is_group_event(evsel))
+		return cmp;
+
+	nr_members = evsel->core.nr_members;
+	if (idx < 1 || idx >= nr_members)
+		return cmp;
+
+	ret = hist_entry__new_pair(a, b, get_field, nr_members, &fields_a, &fields_b);
+	if (ret) {
+		ret = cmp;
+		goto out;
+	}
+
+	ret = field_cmp(fields_a[idx], fields_b[idx]);
+	if (ret)
+		goto out;
+
+	for (i = 1; i < nr_members; i++) {
+		if (i != idx) {
+			ret = field_cmp(fields_a[i], fields_b[i]);
+			if (ret)
+				goto out;
+		}
+	}
+
+out:
+	free(fields_a);
+	free(fields_b);
+
+	return ret;
+}
+
 static int __hpp__sort(struct hist_entry *a, struct hist_entry *b,
 		       hpp_field_fn get_field)
 {
 	s64 ret;
 	int i, nr_members;
 	struct evsel *evsel;
-	struct hist_entry *pair;
 	u64 *fields_a, *fields_b;
 
+	if (symbol_conf.group_sort_idx && symbol_conf.event_group) {
+		return __hpp__group_sort_idx(a, b, get_field,
+					     symbol_conf.group_sort_idx);
+	}
+
 	ret = field_cmp(get_field(a), get_field(b));
 	if (ret || !symbol_conf.event_group)
 		return ret;
@@ -169,22 +244,10 @@ static int __hpp__sort(struct hist_entry *a, struct hist_entry *b,
 		return ret;
 
 	nr_members = evsel->core.nr_members;
-	fields_a = calloc(nr_members, sizeof(*fields_a));
-	fields_b = calloc(nr_members, sizeof(*fields_b));
-
-	if (!fields_a || !fields_b)
+	i = hist_entry__new_pair(a, b, get_field, nr_members, &fields_a, &fields_b);
+	if (i)
 		goto out;
 
-	list_for_each_entry(pair, &a->pairs.head, pairs.node) {
-		evsel = hists_to_evsel(pair->hists);
-		fields_a[perf_evsel__group_idx(evsel)] = get_field(pair);
-	}
-
-	list_for_each_entry(pair, &b->pairs.head, pairs.node) {
-		evsel = hists_to_evsel(pair->hists);
-		fields_b[perf_evsel__group_idx(evsel)] = get_field(pair);
-	}
-
 	for (i = 1; i < nr_members; i++) {
 		ret = field_cmp(fields_a[i], fields_b[i]);
 		if (ret)
diff --git a/tools/perf/ui/keysyms.h b/tools/perf/ui/keysyms.h
index fbfac2907..04cc4e5 100644
--- a/tools/perf/ui/keysyms.h
+++ b/tools/perf/ui/keysyms.h
@@ -25,5 +25,6 @@
 #define K_ERROR	 -2
 #define K_RESIZE -3
 #define K_SWITCH_INPUT_DATA -4
+#define K_RELOAD -5
 
 #endif /* _PERF_KEYSYMS_H_ */
diff --git a/tools/perf/util/annotate.h b/tools/perf/util/annotate.h
index 07c7759..2d88069 100644
--- a/tools/perf/util/annotate.h
+++ b/tools/perf/util/annotate.h
@@ -74,6 +74,7 @@ bool ins__is_fused(struct arch *arch, const char *ins1, const char *ins2);
 #define ANNOTATION__CYCLES_WIDTH 6
 #define ANNOTATION__MINMAX_CYCLES_WIDTH 19
 #define ANNOTATION__AVG_IPC_WIDTH 36
+#define ANNOTATION_DUMMY_LEN	256
 
 struct annotation_options {
 	bool hide_src_code,
diff --git a/tools/perf/util/cgroup.c b/tools/perf/util/cgroup.c
index 5bc9d3b..b73fb78 100644
--- a/tools/perf/util/cgroup.c
+++ b/tools/perf/util/cgroup.c
@@ -191,3 +191,83 @@ int parse_cgroups(const struct option *opt, const char *str,
 	}
 	return 0;
 }
+
+static struct cgroup *__cgroup__findnew(struct rb_root *root, uint64_t id,
+					bool create, const char *path)
+{
+	struct rb_node **p = &root->rb_node;
+	struct rb_node *parent = NULL;
+	struct cgroup *cgrp;
+
+	while (*p != NULL) {
+		parent = *p;
+		cgrp = rb_entry(parent, struct cgroup, node);
+
+		if (cgrp->id == id)
+			return cgrp;
+
+		if (cgrp->id < id)
+			p = &(*p)->rb_left;
+		else
+			p = &(*p)->rb_right;
+	}
+
+	if (!create)
+		return NULL;
+
+	cgrp = malloc(sizeof(*cgrp));
+	if (cgrp == NULL)
+		return NULL;
+
+	cgrp->name = strdup(path);
+	if (cgrp->name == NULL) {
+		free(cgrp);
+		return NULL;
+	}
+
+	cgrp->fd = -1;
+	cgrp->id = id;
+	refcount_set(&cgrp->refcnt, 1);
+
+	rb_link_node(&cgrp->node, parent, p);
+	rb_insert_color(&cgrp->node, root);
+
+	return cgrp;
+}
+
+struct cgroup *cgroup__findnew(struct perf_env *env, uint64_t id,
+			       const char *path)
+{
+	struct cgroup *cgrp;
+
+	down_write(&env->cgroups.lock);
+	cgrp = __cgroup__findnew(&env->cgroups.tree, id, true, path);
+	up_write(&env->cgroups.lock);
+	return cgrp;
+}
+
+struct cgroup *cgroup__find(struct perf_env *env, uint64_t id)
+{
+	struct cgroup *cgrp;
+
+	down_read(&env->cgroups.lock);
+	cgrp = __cgroup__findnew(&env->cgroups.tree, id, false, NULL);
+	up_read(&env->cgroups.lock);
+	return cgrp;
+}
+
+void perf_env__purge_cgroups(struct perf_env *env)
+{
+	struct rb_node *node;
+	struct cgroup *cgrp;
+
+	down_write(&env->cgroups.lock);
+	while (!RB_EMPTY_ROOT(&env->cgroups.tree)) {
+		node = rb_first(&env->cgroups.tree);
+		cgrp = rb_entry(node, struct cgroup, node);
+
+		rb_erase(node, &env->cgroups.tree);
+		cgroup__put(cgrp);
+	}
+	up_write(&env->cgroups.lock);
+}
diff --git a/tools/perf/util/cgroup.h b/tools/perf/util/cgroup.h
index 2ec11f0..e98d597 100644
--- a/tools/perf/util/cgroup.h
+++ b/tools/perf/util/cgroup.h
@@ -3,16 +3,19 @@
 #define __CGROUP_H__
 
 #include <linux/refcount.h>
+#include <linux/rbtree.h>
+#include "util/env.h"
 
 struct option;
 
 struct cgroup {
-	char *name;
-	int fd;
-	refcount_t refcnt;
+	struct rb_node		node;
+	u64			id;
+	char			*name;
+	int			fd;
+	refcount_t		refcnt;
 };
 
-
 extern int nr_cgroups; /* number of explicit cgroups defined */
 
 struct cgroup *cgroup__get(struct cgroup *cgroup);
@@ -26,4 +29,10 @@ void evlist__set_default_cgroup(struct evlist *evlist, struct cgroup *cgroup);
 
 int parse_cgroups(const struct option *opt, const char *str, int unset);
 
+struct cgroup *cgroup__findnew(struct perf_env *env, uint64_t id,
+			       const char *path);
+struct cgroup *cgroup__find(struct perf_env *env, uint64_t id);
+
+void perf_env__purge_cgroups(struct perf_env *env);
+
 #endif /* __CGROUP_H__ */
diff --git a/tools/perf/util/cpumap.c b/tools/perf/util/cpumap.c
index 983b738..dc5c5e6 100644
--- a/tools/perf/util/cpumap.c
+++ b/tools/perf/util/cpumap.c
@@ -317,7 +317,7 @@ static void set_max_cpu_num(void)
 
 	/* get the highest possible cpu number for a sparse allocation */
 	ret = snprintf(path, PATH_MAX, "%s/devices/system/cpu/possible", mnt);
-	if (ret == PATH_MAX) {
+	if (ret >= PATH_MAX) {
 		pr_err("sysfs path crossed PATH_MAX(%d) size\n", PATH_MAX);
 		goto out;
 	}
@@ -328,7 +328,7 @@ static void set_max_cpu_num(void)
 
 	/* get the highest present cpu number for a sparse allocation */
 	ret = snprintf(path, PATH_MAX, "%s/devices/system/cpu/present", mnt);
-	if (ret == PATH_MAX) {
+	if (ret >= PATH_MAX) {
 		pr_err("sysfs path crossed PATH_MAX(%d) size\n", PATH_MAX);
 		goto out;
 	}
@@ -356,7 +356,7 @@ static void set_max_node_num(void)
 
 	/* get the highest possible cpu number for a sparse allocation */
 	ret = snprintf(path, PATH_MAX, "%s/devices/system/node/possible", mnt);
-	if (ret == PATH_MAX) {
+	if (ret >= PATH_MAX) {
 		pr_err("sysfs path crossed PATH_MAX(%d) size\n", PATH_MAX);
 		goto out;
 	}
@@ -441,7 +441,7 @@ int cpu__setup_cpunode_map(void)
 		return 0;
 
 	n = snprintf(path, PATH_MAX, "%s/devices/system/node", mnt);
-	if (n == PATH_MAX) {
+	if (n >= PATH_MAX) {
 		pr_err("sysfs path crossed PATH_MAX(%d) size\n", PATH_MAX);
 		return -1;
 	}
@@ -456,7 +456,7 @@ int cpu__setup_cpunode_map(void)
 			continue;
 
 		n = snprintf(buf, PATH_MAX, "%s/%s", path, dent1->d_name);
-		if (n == PATH_MAX) {
+		if (n >= PATH_MAX) {
 			pr_err("sysfs path crossed PATH_MAX(%d) size\n", PATH_MAX);
 			continue;
 		}
diff --git a/tools/perf/util/dsos.c b/tools/perf/util/dsos.c
index 591707c..9394717 100644
--- a/tools/perf/util/dsos.c
+++ b/tools/perf/util/dsos.c
@@ -26,13 +26,29 @@ static int __dso_id__cmp(struct dso_id *a, struct dso_id *b)
 	return 0;
 }
 
+static bool dso_id__empty(struct dso_id *id)
+{
+	if (!id)
+		return true;
+
+	return !id->maj && !id->min && !id->ino && !id->ino_generation;
+}
+
+static void dso__inject_id(struct dso *dso, struct dso_id *id)
+{
+	dso->id.maj = id->maj;
+	dso->id.min = id->min;
+	dso->id.ino = id->ino;
+	dso->id.ino_generation = id->ino_generation;
+}
+
 static int dso_id__cmp(struct dso_id *a, struct dso_id *b)
 {
 	/*
 	 * The second is always dso->id, so zeroes if not set, assume passing
 	 * NULL for a means a zeroed id
 	 */
-	if (a == NULL)
+	if (dso_id__empty(a) || dso_id__empty(b))
 		return 0;
 
 	return __dso_id__cmp(a, b);
@@ -249,6 +265,10 @@ struct dso *__dsos__addnew(struct dsos *dsos, const char *name)
 static struct dso *__dsos__findnew_id(struct dsos *dsos, const char *name, struct dso_id *id)
 {
 	struct dso *dso = __dsos__find_id(dsos, name, id, false);
+
+	if (dso && dso_id__empty(&dso->id) && !dso_id__empty(id))
+		dso__inject_id(dso, id);
+
 	return dso ? dso : __dsos__addnew_id(dsos, name, id);
 }
 
diff --git a/tools/perf/util/env.c b/tools/perf/util/env.c
index 4154f94..fadc597 100644
--- a/tools/perf/util/env.c
+++ b/tools/perf/util/env.c
@@ -6,6 +6,7 @@
 #include <linux/ctype.h>
 #include <linux/zalloc.h>
 #include "bpf-event.h"
+#include "cgroup.h"
 #include <errno.h>
 #include <sys/utsname.h>
 #include <bpf/libbpf.h>
@@ -168,6 +169,7 @@ void perf_env__exit(struct perf_env *env)
 	int i;
 
 	perf_env__purge_bpf(env);
+	perf_env__purge_cgroups(env);
 	zfree(&env->hostname);
 	zfree(&env->os_release);
 	zfree(&env->version);
diff --git a/tools/perf/util/env.h b/tools/perf/util/env.h
index 11d05ae..7632075 100644
--- a/tools/perf/util/env.h
+++ b/tools/perf/util/env.h
@@ -88,6 +88,12 @@ struct perf_env {
 		u32			btfs_cnt;
 	} bpf_progs;
 
+	/* same reason as above (for perf-top) */
+	struct {
+		struct rw_semaphore	lock;
+		struct rb_root		tree;
+	} cgroups;
+
 	/* For fast cpu to numa node lookup via perf_env__numa_node */
 	int			*numa_map;
 	int			 nr_numa_map;
diff --git a/tools/perf/util/event.c b/tools/perf/util/event.c
index c5447ff..dc0e112 100644
--- a/tools/perf/util/event.c
+++ b/tools/perf/util/event.c
@@ -54,6 +54,7 @@ static const char *perf_event__names[] = {
 	[PERF_RECORD_NAMESPACES]		= "NAMESPACES",
 	[PERF_RECORD_KSYMBOL]			= "KSYMBOL",
 	[PERF_RECORD_BPF_EVENT]			= "BPF_EVENT",
+	[PERF_RECORD_CGROUP]			= "CGROUP",
 	[PERF_RECORD_HEADER_ATTR]		= "ATTR",
 	[PERF_RECORD_HEADER_EVENT_TYPE]		= "EVENT_TYPE",
 	[PERF_RECORD_HEADER_TRACING_DATA]	= "TRACING_DATA",
@@ -180,6 +181,12 @@ size_t perf_event__fprintf_namespaces(union perf_event *event, FILE *fp)
 	return ret;
 }
 
+size_t perf_event__fprintf_cgroup(union perf_event *event, FILE *fp)
+{
+	return fprintf(fp, " cgroup: %" PRI_lu64 " %s\n",
+		       event->cgroup.id, event->cgroup.path);
+}
+
 int perf_event__process_comm(struct perf_tool *tool __maybe_unused,
 			     union perf_event *event,
 			     struct perf_sample *sample,
@@ -196,6 +203,14 @@ int perf_event__process_namespaces(struct perf_tool *tool __maybe_unused,
 	return machine__process_namespaces_event(machine, event, sample);
 }
 
+int perf_event__process_cgroup(struct perf_tool *tool __maybe_unused,
+			       union perf_event *event,
+			       struct perf_sample *sample,
+			       struct machine *machine)
+{
+	return machine__process_cgroup_event(machine, event, sample);
+}
+
 int perf_event__process_lost(struct perf_tool *tool __maybe_unused,
 			     union perf_event *event,
 			     struct perf_sample *sample,
@@ -417,6 +432,9 @@ size_t perf_event__fprintf(union perf_event *event, FILE *fp)
 	case PERF_RECORD_NAMESPACES:
 		ret += perf_event__fprintf_namespaces(event, fp);
 		break;
+	case PERF_RECORD_CGROUP:
+		ret += perf_event__fprintf_cgroup(event, fp);
+		break;
 	case PERF_RECORD_MMAP2:
 		ret += perf_event__fprintf_mmap2(event, fp);
 		break;
@@ -599,10 +617,23 @@ int machine__resolve(struct machine *machine, struct addr_location *al,
 		al->sym = map__find_symbol(al->map, al->addr);
 	}
 
-	if (symbol_conf.sym_list &&
-		(!al->sym || !strlist__has_entry(symbol_conf.sym_list,
-						al->sym->name))) {
-		al->filtered |= (1 << HIST_FILTER__SYMBOL);
+	if (symbol_conf.sym_list) {
+		int ret = 0;
+		char al_addr_str[32];
+		size_t sz = sizeof(al_addr_str);
+
+		if (al->sym) {
+			ret = strlist__has_entry(symbol_conf.sym_list,
+						al->sym->name);
+		}
+		if (!(ret && al->sym)) {
+			snprintf(al_addr_str, sz, "0x%"PRIx64,
+				al->map->unmap_ip(al->map, al->sym->start));
+			ret = strlist__has_entry(symbol_conf.sym_list,
+						al_addr_str);
+		}
+		if (!ret)
+			al->filtered |= (1 << HIST_FILTER__SYMBOL);
 	}
 
 	return 0;
diff --git a/tools/perf/util/event.h b/tools/perf/util/event.h
index 3cda40a..b8289f1 100644
--- a/tools/perf/util/event.h
+++ b/tools/perf/util/event.h
@@ -135,6 +135,7 @@ struct perf_sample {
 	u32 raw_size;
 	u64 data_src;
 	u64 phys_addr;
+	u64 cgroup;
 	u32 flags;
 	u16 insn_len;
 	u8  cpumode;
@@ -322,6 +323,10 @@ int perf_event__process_namespaces(struct perf_tool *tool,
 				   union perf_event *event,
 				   struct perf_sample *sample,
 				   struct machine *machine);
+int perf_event__process_cgroup(struct perf_tool *tool,
+			       union perf_event *event,
+			       struct perf_sample *sample,
+			       struct machine *machine);
 int perf_event__process_mmap(struct perf_tool *tool,
 			     union perf_event *event,
 			     struct perf_sample *sample,
@@ -377,6 +382,7 @@ size_t perf_event__fprintf_switch(union perf_event *event, FILE *fp);
 size_t perf_event__fprintf_thread_map(union perf_event *event, FILE *fp);
 size_t perf_event__fprintf_cpu_map(union perf_event *event, FILE *fp);
 size_t perf_event__fprintf_namespaces(union perf_event *event, FILE *fp);
+size_t perf_event__fprintf_cgroup(union perf_event *event, FILE *fp);
 size_t perf_event__fprintf_ksymbol(union perf_event *event, FILE *fp);
 size_t perf_event__fprintf_bpf(union perf_event *event, FILE *fp);
 size_t perf_event__fprintf(union perf_event *event, FILE *fp);
diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c
index 816d930..eb880ef 100644
--- a/tools/perf/util/evsel.c
+++ b/tools/perf/util/evsel.c
@@ -1104,6 +1104,11 @@ void perf_evsel__config(struct evsel *evsel, struct record_opts *opts,
 	if (opts->record_namespaces)
 		attr->namespaces  = track;
 
+	if (opts->record_cgroup) {
+		attr->cgroup = track && !perf_missing_features.cgroup;
+		perf_evsel__set_sample_bit(evsel, CGROUP);
+	}
+
 	if (opts->record_switch_events)
 		attr->context_switch = track;
 
@@ -1287,6 +1292,7 @@ void perf_evsel__exit(struct evsel *evsel)
 	perf_thread_map__put(evsel->core.threads);
 	zfree(&evsel->group_name);
 	zfree(&evsel->name);
+	zfree(&evsel->pmu_name);
 	perf_evsel__object.fini(evsel);
 }
 
@@ -1788,7 +1794,11 @@ static int evsel__open_cpu(struct evsel *evsel, struct perf_cpu_map *cpus,
 	 * Must probe features in the order they were added to the
 	 * perf_event_attr interface.
 	 */
-	if (!perf_missing_features.branch_hw_idx &&
+        if (!perf_missing_features.cgroup && evsel->core.attr.cgroup) {
+		perf_missing_features.cgroup = true;
+		pr_debug2_peo("Kernel has no cgroup sampling support, bailing out\n");
+		goto out_close;
+        } else if (!perf_missing_features.branch_hw_idx &&
 	    (evsel->core.attr.branch_sample_type & PERF_SAMPLE_BRANCH_HW_INDEX)) {
 		perf_missing_features.branch_hw_idx = true;
 		pr_debug2("switching off branch HW index support\n");
@@ -2266,6 +2276,12 @@ int perf_evsel__parse_sample(struct evsel *evsel, union perf_event *event,
 		array++;
 	}
 
+	data->cgroup = 0;
+	if (type & PERF_SAMPLE_CGROUP) {
+		data->cgroup = *array;
+		array++;
+	}
+
 	if (type & PERF_SAMPLE_AUX) {
 		OVERFLOW_CHECK_u64(array);
 		sz = *array++;
diff --git a/tools/perf/util/evsel.h b/tools/perf/util/evsel.h
index 3380474..53187c5 100644
--- a/tools/perf/util/evsel.h
+++ b/tools/perf/util/evsel.h
@@ -120,6 +120,7 @@ struct perf_missing_features {
 	bool bpf;
 	bool aux_output;
 	bool branch_hw_idx;
+	bool cgroup;
 };
 
 extern struct perf_missing_features perf_missing_features;
diff --git a/tools/perf/util/hist.c b/tools/perf/util/hist.c
index e74a5ac..283a69f 100644
--- a/tools/perf/util/hist.c
+++ b/tools/perf/util/hist.c
@@ -10,6 +10,7 @@
 #include "mem-events.h"
 #include "session.h"
 #include "namespaces.h"
+#include "cgroup.h"
 #include "sort.h"
 #include "units.h"
 #include "evlist.h"
@@ -194,6 +195,7 @@ void hists__calc_col_len(struct hists *hists, struct hist_entry *h)
 		hists__set_unres_dso_col_len(hists, HISTC_MEM_DADDR_DSO);
 	}
 
+	hists__new_col_len(hists, HISTC_CGROUP, 6);
 	hists__new_col_len(hists, HISTC_CGROUP_ID, 20);
 	hists__new_col_len(hists, HISTC_CPU, 3);
 	hists__new_col_len(hists, HISTC_SOCKET, 6);
@@ -222,6 +224,16 @@ void hists__calc_col_len(struct hists *hists, struct hist_entry *h)
 
 	if (h->trace_output)
 		hists__new_col_len(hists, HISTC_TRACE, strlen(h->trace_output));
+
+	if (h->cgroup) {
+		const char *cgrp_name = "unknown";
+		struct cgroup *cgrp = cgroup__find(h->ms.maps->machine->env,
+						   h->cgroup);
+		if (cgrp != NULL)
+			cgrp_name = cgrp->name;
+
+		hists__new_col_len(hists, HISTC_CGROUP, strlen(cgrp_name));
+	}
 }
 
 void hists__output_recalc_col_len(struct hists *hists, int max_rows)
@@ -691,6 +703,7 @@ __hists__add_entry(struct hists *hists,
 			.dev = ns ? ns->link_info[CGROUP_NS_INDEX].dev : 0,
 			.ino = ns ? ns->link_info[CGROUP_NS_INDEX].ino : 0,
 		},
+		.cgroup = sample->cgroup,
 		.ms = {
 			.maps	= al->maps,
 			.map	= al->map,
diff --git a/tools/perf/util/hist.h b/tools/perf/util/hist.h
index 0aa63ae..4141295 100644
--- a/tools/perf/util/hist.h
+++ b/tools/perf/util/hist.h
@@ -38,6 +38,7 @@ enum hist_column {
 	HISTC_THREAD,
 	HISTC_COMM,
 	HISTC_CGROUP_ID,
+	HISTC_CGROUP,
 	HISTC_PARENT,
 	HISTC_CPU,
 	HISTC_SOCKET,
@@ -536,6 +537,7 @@ static inline int block_hists_tui_browse(struct block_hist *bh __maybe_unused,
 #define K_LEFT  -1000
 #define K_RIGHT -2000
 #define K_SWITCH_INPUT_DATA -3000
+#define K_RELOAD -4000
 #endif
 
 unsigned int hists__sort_list_width(struct hists *hists);
diff --git a/tools/perf/util/machine.c b/tools/perf/util/machine.c
index fd14f14..97142e9 100644
--- a/tools/perf/util/machine.c
+++ b/tools/perf/util/machine.c
@@ -33,6 +33,7 @@
 #include "asm/bug.h"
 #include "bpf-event.h"
 #include <internal/lib.h> // page_size
+#include "cgroup.h"
 
 #include <linux/ctype.h>
 #include <symbol/kallsyms.h>
@@ -654,6 +655,22 @@ int machine__process_namespaces_event(struct machine *machine __maybe_unused,
 	return err;
 }
 
+int machine__process_cgroup_event(struct machine *machine,
+				  union perf_event *event,
+				  struct perf_sample *sample __maybe_unused)
+{
+	struct cgroup *cgrp;
+
+	if (dump_trace)
+		perf_event__fprintf_cgroup(event, stdout);
+
+	cgrp = cgroup__findnew(machine->env, event->cgroup.id, event->cgroup.path);
+	if (cgrp == NULL)
+		return -ENOMEM;
+
+	return 0;
+}
+
 int machine__process_lost_event(struct machine *machine __maybe_unused,
 				union perf_event *event, struct perf_sample *sample __maybe_unused)
 {
@@ -1878,6 +1895,8 @@ int machine__process_event(struct machine *machine, union perf_event *event,
 		ret = machine__process_mmap_event(machine, event, sample); break;
 	case PERF_RECORD_NAMESPACES:
 		ret = machine__process_namespaces_event(machine, event, sample); break;
+	case PERF_RECORD_CGROUP:
+		ret = machine__process_cgroup_event(machine, event, sample); break;
 	case PERF_RECORD_MMAP2:
 		ret = machine__process_mmap2_event(machine, event, sample); break;
 	case PERF_RECORD_FORK:
diff --git a/tools/perf/util/machine.h b/tools/perf/util/machine.h
index be0a930..fa1be9e 100644
--- a/tools/perf/util/machine.h
+++ b/tools/perf/util/machine.h
@@ -128,6 +128,9 @@ int machine__process_switch_event(struct machine *machine,
 int machine__process_namespaces_event(struct machine *machine,
 				      union perf_event *event,
 				      struct perf_sample *sample);
+int machine__process_cgroup_event(struct machine *machine,
+				  union perf_event *event,
+				  struct perf_sample *sample);
 int machine__process_mmap_event(struct machine *machine, union perf_event *event,
 				struct perf_sample *sample);
 int machine__process_mmap2_event(struct machine *machine, union perf_event *event,
diff --git a/tools/perf/util/metricgroup.c b/tools/perf/util/metricgroup.c
index c3a8c70..926449a 100644
--- a/tools/perf/util/metricgroup.c
+++ b/tools/perf/util/metricgroup.c
@@ -95,13 +95,16 @@ struct egroup {
 static struct evsel *find_evsel_group(struct evlist *perf_evlist,
 				      const char **ids,
 				      int idnum,
-				      struct evsel **metric_events)
+				      struct evsel **metric_events,
+				      bool *evlist_used)
 {
 	struct evsel *ev;
-	int i = 0;
+	int i = 0, j = 0;
 	bool leader_found;
 
 	evlist__for_each_entry (perf_evlist, ev) {
+		if (evlist_used[j++])
+			continue;
 		if (!strcmp(ev->name, ids[i])) {
 			if (!metric_events[i])
 				metric_events[i] = ev;
@@ -109,22 +112,17 @@ static struct evsel *find_evsel_group(struct evlist *perf_evlist,
 			if (i == idnum)
 				break;
 		} else {
-			if (i + 1 == idnum) {
-				/* Discard the whole match and start again */
-				i = 0;
-				memset(metric_events, 0,
-				       sizeof(struct evsel *) * idnum);
-				continue;
-			}
+			/* Discard the whole match and start again */
+			i = 0;
+			memset(metric_events, 0,
+				sizeof(struct evsel *) * idnum);
 
-			if (!strcmp(ev->name, ids[i]))
-				metric_events[i] = ev;
-			else {
-				/* Discard the whole match and start again */
-				i = 0;
-				memset(metric_events, 0,
-				       sizeof(struct evsel *) * idnum);
-				continue;
+			if (!strcmp(ev->name, ids[i])) {
+				if (!metric_events[i])
+					metric_events[i] = ev;
+				i++;
+				if (i == idnum)
+					break;
 			}
 		}
 	}
@@ -146,7 +144,10 @@ static struct evsel *find_evsel_group(struct evlist *perf_evlist,
 			    !strcmp(ev->name, metric_events[i]->name)) {
 				ev->metric_leader = metric_events[i];
 			}
+			j++;
 		}
+		ev = metric_events[i];
+		evlist_used[ev->idx] = true;
 	}
 
 	return metric_events[0];
@@ -162,6 +163,13 @@ static int metricgroup__setup_events(struct list_head *groups,
 	int ret = 0;
 	struct egroup *eg;
 	struct evsel *evsel;
+	bool *evlist_used;
+
+	evlist_used = calloc(perf_evlist->core.nr_entries, sizeof(bool));
+	if (!evlist_used) {
+		ret = -ENOMEM;
+		return ret;
+	}
 
 	list_for_each_entry (eg, groups, nd) {
 		struct evsel **metric_events;
@@ -172,7 +180,7 @@ static int metricgroup__setup_events(struct list_head *groups,
 			break;
 		}
 		evsel = find_evsel_group(perf_evlist, eg->ids, eg->idnum,
-					 metric_events);
+					 metric_events, evlist_used);
 		if (!evsel) {
 			pr_debug("Cannot resolve %s: %s\n",
 					eg->metric_name, eg->metric_expr);
@@ -196,6 +204,9 @@ static int metricgroup__setup_events(struct list_head *groups,
 		expr->metric_events = metric_events;
 		list_add(&expr->nd, &me->head);
 	}
+
+	free(evlist_used);
+
 	return ret;
 }
 
diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c
index a7dc0b0..1010774 100644
--- a/tools/perf/util/parse-events.c
+++ b/tools/perf/util/parse-events.c
@@ -1449,7 +1449,7 @@ int parse_events_add_pmu(struct parse_events_state *parse_state,
 		evsel = __add_event(list, &parse_state->idx, &attr, NULL, pmu, NULL,
 				    auto_merge_stats, NULL);
 		if (evsel) {
-			evsel->pmu_name = name;
+			evsel->pmu_name = name ? strdup(name) : NULL;
 			evsel->use_uncore_alias = use_uncore_alias;
 			return 0;
 		} else {
@@ -1497,7 +1497,7 @@ int parse_events_add_pmu(struct parse_events_state *parse_state,
 		evsel->snapshot = info.snapshot;
 		evsel->metric_expr = info.metric_expr;
 		evsel->metric_name = info.metric_name;
-		evsel->pmu_name = name;
+		evsel->pmu_name = name ? strdup(name) : NULL;
 		evsel->use_uncore_alias = use_uncore_alias;
 		evsel->percore = config_term_percore(&evsel->config_terms);
 	}
@@ -1547,7 +1547,7 @@ int parse_events_multi_pmu_add(struct parse_events_state *parse_state,
 				if (!parse_events_add_pmu(parse_state, list,
 							  pmu->name, head,
 							  true, true)) {
-					pr_debug("%s -> %s/%s/\n", config,
+					pr_debug("%s -> %s/%s/\n", str,
 						 pmu->name, alias->str);
 					ok++;
 				}
diff --git a/tools/perf/util/parse-events.l b/tools/perf/util/parse-events.l
index 7b1c8ee..baa48f2 100644
--- a/tools/perf/util/parse-events.l
+++ b/tools/perf/util/parse-events.l
@@ -342,11 +342,13 @@
 	 * Because the prefix cycles is mixed up with cpu-cycles.
 	 * loads and stores are mixed up with cache event
 	 */
-cycles-ct					{ return str(yyscanner, PE_KERNEL_PMU_EVENT); }
-cycles-t					{ return str(yyscanner, PE_KERNEL_PMU_EVENT); }
-mem-loads					{ return str(yyscanner, PE_KERNEL_PMU_EVENT); }
-mem-stores					{ return str(yyscanner, PE_KERNEL_PMU_EVENT); }
-topdown-[a-z-]+					{ return str(yyscanner, PE_KERNEL_PMU_EVENT); }
+cycles-ct				|
+cycles-t				|
+mem-loads				|
+mem-stores				|
+topdown-[a-z-]+				|
+tx-capacity-[a-z-]+			|
+el-capacity-[a-z-]+			{ return str(yyscanner, PE_KERNEL_PMU_EVENT); }
 
 L1-dcache|l1-d|l1d|L1-data		|
 L1-icache|l1-i|l1i|L1-instruction	|
diff --git a/tools/perf/util/perf_event_attr_fprintf.c b/tools/perf/util/perf_event_attr_fprintf.c
index 355d345..b94fa07 100644
--- a/tools/perf/util/perf_event_attr_fprintf.c
+++ b/tools/perf/util/perf_event_attr_fprintf.c
@@ -35,6 +35,7 @@ static void __p_sample_type(char *buf, size_t size, u64 value)
 		bit_name(BRANCH_STACK), bit_name(REGS_USER), bit_name(STACK_USER),
 		bit_name(IDENTIFIER), bit_name(REGS_INTR), bit_name(DATA_SRC),
 		bit_name(WEIGHT), bit_name(PHYS_ADDR), bit_name(AUX),
+		bit_name(CGROUP),
 		{ .name = NULL, }
 	};
 #undef bit_name
@@ -132,6 +133,7 @@ int perf_event_attr__fprintf(FILE *fp, struct perf_event_attr *attr,
 	PRINT_ATTRf(ksymbol, p_unsigned);
 	PRINT_ATTRf(bpf_event, p_unsigned);
 	PRINT_ATTRf(aux_output, p_unsigned);
+	PRINT_ATTRf(cgroup, p_unsigned);
 
 	PRINT_ATTRn("{ wakeup_events, wakeup_watermark }", wakeup_events, p_unsigned);
 	PRINT_ATTRf(bp_type, p_unsigned);
diff --git a/tools/perf/util/pmu.c b/tools/perf/util/pmu.c
index 8b99fd3..ef6a63f 100644
--- a/tools/perf/util/pmu.c
+++ b/tools/perf/util/pmu.c
@@ -21,7 +21,6 @@
 #include "pmu.h"
 #include "parse-events.h"
 #include "header.h"
-#include "pmu-events/pmu-events.h"
 #include "string2.h"
 #include "strbuf.h"
 #include "fncache.h"
@@ -699,7 +698,7 @@ struct pmu_events_map *perf_pmu__find_map(struct perf_pmu *pmu)
 	return map;
 }
 
-static bool pmu_uncore_alias_match(const char *pmu_name, const char *name)
+bool pmu_uncore_alias_match(const char *pmu_name, const char *name)
 {
 	char *tmp = NULL, *tok, *str;
 	bool res;
@@ -744,16 +743,11 @@ static bool pmu_uncore_alias_match(const char *pmu_name, const char *name)
  * to the current running CPU. Then, add all PMU events from that table
  * as aliases.
  */
-static void pmu_add_cpu_aliases(struct list_head *head, struct perf_pmu *pmu)
+void pmu_add_cpu_aliases_map(struct list_head *head, struct perf_pmu *pmu,
+			     struct pmu_events_map *map)
 {
 	int i;
-	struct pmu_events_map *map;
 	const char *name = pmu->name;
-
-	map = perf_pmu__find_map(pmu);
-	if (!map)
-		return;
-
 	/*
 	 * Found a matching PMU events table. Create aliases
 	 */
@@ -788,6 +782,17 @@ static void pmu_add_cpu_aliases(struct list_head *head, struct perf_pmu *pmu)
 	}
 }
 
+static void pmu_add_cpu_aliases(struct list_head *head, struct perf_pmu *pmu)
+{
+	struct pmu_events_map *map;
+
+	map = perf_pmu__find_map(pmu);
+	if (!map)
+		return;
+
+	pmu_add_cpu_aliases_map(head, pmu, map);
+}
+
 struct perf_event_attr * __weak
 perf_pmu__get_default_config(struct perf_pmu *pmu __maybe_unused)
 {
@@ -979,12 +984,11 @@ static int pmu_resolve_param_term(struct parse_events_term *term,
 	struct parse_events_term *t;
 
 	list_for_each_entry(t, head_terms, list) {
-		if (t->type_val == PARSE_EVENTS__TERM_TYPE_NUM) {
-			if (!strcmp(t->config, term->config)) {
-				t->used = true;
-				*value = t->val.num;
-				return 0;
-			}
+		if (t->type_val == PARSE_EVENTS__TERM_TYPE_NUM &&
+		    t->config && !strcmp(t->config, term->config)) {
+			t->used = true;
+			*value = t->val.num;
+			return 0;
 		}
 	}
 
@@ -1395,6 +1399,11 @@ static void wordwrap(char *s, int start, int max, int corr)
 	}
 }
 
+bool is_pmu_core(const char *name)
+{
+	return !strcmp(name, "cpu") || is_arm_pmu_core(name);
+}
+
 void print_pmu_events(const char *event_glob, bool name_only, bool quiet_flag,
 			bool long_desc, bool details_flag, bool deprecated)
 {
diff --git a/tools/perf/util/pmu.h b/tools/perf/util/pmu.h
index 6737e3d..5fb3f16 100644
--- a/tools/perf/util/pmu.h
+++ b/tools/perf/util/pmu.h
@@ -7,6 +7,7 @@
 #include <linux/perf_event.h>
 #include <stdbool.h>
 #include "parse-events.h"
+#include "pmu-events/pmu-events.h"
 
 struct perf_evsel_config_term;
 
@@ -87,6 +88,7 @@ int perf_pmu__format_parse(char *dir, struct list_head *head);
 
 struct perf_pmu *perf_pmu__scan(struct perf_pmu *pmu);
 
+bool is_pmu_core(const char *name);
 void print_pmu_events(const char *event_glob, bool name_only, bool quiet,
 		      bool long_desc, bool details_flag,
 		      bool deprecated);
@@ -97,8 +99,11 @@ int perf_pmu__scan_file(struct perf_pmu *pmu, const char *name, const char *fmt,
 int perf_pmu__test(void);
 
 struct perf_event_attr *perf_pmu__get_default_config(struct perf_pmu *pmu);
+void pmu_add_cpu_aliases_map(struct list_head *head, struct perf_pmu *pmu,
+			     struct pmu_events_map *map);
 
 struct pmu_events_map *perf_pmu__find_map(struct perf_pmu *pmu);
+bool pmu_uncore_alias_match(const char *pmu_name, const char *name);
 
 int perf_pmu__convert_scale(const char *scale, char **end, double *sval);
 
diff --git a/tools/perf/util/python-ext-sources b/tools/perf/util/python-ext-sources
index e7279ea..a9d9c14 100644
--- a/tools/perf/util/python-ext-sources
+++ b/tools/perf/util/python-ext-sources
@@ -34,3 +34,4 @@
 util/symbol_fprintf.c
 util/units.c
 util/affinity.c
+util/rwsem.c
diff --git a/tools/perf/util/record.h b/tools/perf/util/record.h
index 5421fd2..2431645 100644
--- a/tools/perf/util/record.h
+++ b/tools/perf/util/record.h
@@ -34,6 +34,7 @@ struct record_opts {
 	bool	      auxtrace_snapshot_on_exit;
 	bool	      auxtrace_sample_mode;
 	bool	      record_namespaces;
+	bool	      record_cgroup;
 	bool	      record_switch_events;
 	bool	      all_kernel;
 	bool	      all_user;
diff --git a/tools/perf/util/scripting-engines/trace-event-python.c b/tools/perf/util/scripting-engines/trace-event-python.c
index 8c1b27c..2c372cf 100644
--- a/tools/perf/util/scripting-engines/trace-event-python.c
+++ b/tools/perf/util/scripting-engines/trace-event-python.c
@@ -694,6 +694,9 @@ static int regs_map(struct regs_dump *regs, uint64_t mask, char *bf, int size)
 
 	bf[0] = 0;
 
+	if (!regs || !regs->regs)
+		return 0;
+
 	for_each_set_bit(r, (unsigned long *) &mask, sizeof(mask) * 8) {
 		u64 val = regs->regs[i++];
 
diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c
index 055b00a..0b0bfe5 100644
--- a/tools/perf/util/session.c
+++ b/tools/perf/util/session.c
@@ -471,6 +471,8 @@ void perf_tool__fill_defaults(struct perf_tool *tool)
 		tool->comm = process_event_stub;
 	if (tool->namespaces == NULL)
 		tool->namespaces = process_event_stub;
+	if (tool->cgroup == NULL)
+		tool->cgroup = process_event_stub;
 	if (tool->fork == NULL)
 		tool->fork = process_event_stub;
 	if (tool->exit == NULL)
@@ -1436,6 +1438,8 @@ static int machines__deliver_event(struct machines *machines,
 		return tool->comm(tool, event, sample, machine);
 	case PERF_RECORD_NAMESPACES:
 		return tool->namespaces(tool, event, sample, machine);
+	case PERF_RECORD_CGROUP:
+		return tool->cgroup(tool, event, sample, machine);
 	case PERF_RECORD_FORK:
 		return tool->fork(tool, event, sample, machine);
 	case PERF_RECORD_EXIT:
diff --git a/tools/perf/util/setup.py b/tools/perf/util/setup.py
index 8a065a6..c5e3e9a 100644
--- a/tools/perf/util/setup.py
+++ b/tools/perf/util/setup.py
@@ -3,7 +3,7 @@
 from re import sub
 
 cc = getenv("CC")
-cc_is_clang = b"clang version" in Popen([cc, "-v"], stderr=PIPE).stderr.readline()
+cc_is_clang = b"clang version" in Popen([cc.split()[0], "-v"], stderr=PIPE).stderr.readline()
 
 def clang_has_option(option):
     return [o for o in Popen([cc, option], stderr=PIPE).stderr.readlines() if b"unknown argument" in o] == [ ]
@@ -21,6 +21,8 @@
             vars[var] = sub("-fstack-clash-protection", "", vars[var])
         if not clang_has_option("-fstack-protector-strong"):
             vars[var] = sub("-fstack-protector-strong", "", vars[var])
+        if not clang_has_option("-fno-semantic-interposition"):
+            vars[var] = sub("-fno-semantic-interposition", "", vars[var])
 
 from distutils.core import setup, Extension
 
diff --git a/tools/perf/util/sort.c b/tools/perf/util/sort.c
index ab0cfd7..f14cc72 100644
--- a/tools/perf/util/sort.c
+++ b/tools/perf/util/sort.c
@@ -12,6 +12,7 @@
 #include "cacheline.h"
 #include "comm.h"
 #include "map.h"
+#include "maps.h"
 #include "symbol.h"
 #include "map_symbol.h"
 #include "branch.h"
@@ -25,6 +26,8 @@
 #include "mem-events.h"
 #include "annotate.h"
 #include "time-utils.h"
+#include "cgroup.h"
+#include "machine.h"
 #include <linux/kernel.h>
 #include <linux/string.h>
 
@@ -634,6 +637,39 @@ struct sort_entry sort_cgroup_id = {
 	.se_width_idx	= HISTC_CGROUP_ID,
 };
 
+/* --sort cgroup */
+
+static int64_t
+sort__cgroup_cmp(struct hist_entry *left, struct hist_entry *right)
+{
+	return right->cgroup - left->cgroup;
+}
+
+static int hist_entry__cgroup_snprintf(struct hist_entry *he,
+				       char *bf, size_t size,
+				       unsigned int width __maybe_unused)
+{
+	const char *cgrp_name = "N/A";
+
+	if (he->cgroup) {
+		struct cgroup *cgrp = cgroup__find(he->ms.maps->machine->env,
+						   he->cgroup);
+		if (cgrp != NULL)
+			cgrp_name = cgrp->name;
+		else
+			cgrp_name = "unknown";
+	}
+
+	return repsep_snprintf(bf, size, "%s", cgrp_name);
+}
+
+struct sort_entry sort_cgroup = {
+	.se_header      = "Cgroup",
+	.se_cmp	        = sort__cgroup_cmp,
+	.se_snprintf    = hist_entry__cgroup_snprintf,
+	.se_width_idx	= HISTC_CGROUP,
+};
+
 /* --sort socket */
 
 static int64_t
@@ -869,7 +905,8 @@ static int hist_entry__sym_from_snprintf(struct hist_entry *he, char *bf,
 	if (he->branch_info) {
 		struct addr_map_symbol *from = &he->branch_info->from;
 
-		return _hist_entry__sym_snprintf(&from->ms, from->addr, he->level, bf, size, width);
+		return _hist_entry__sym_snprintf(&from->ms, from->al_addr,
+						 he->level, bf, size, width);
 	}
 
 	return repsep_snprintf(bf, size, "%-*.*s", width, width, "N/A");
@@ -881,7 +918,8 @@ static int hist_entry__sym_to_snprintf(struct hist_entry *he, char *bf,
 	if (he->branch_info) {
 		struct addr_map_symbol *to = &he->branch_info->to;
 
-		return _hist_entry__sym_snprintf(&to->ms, to->addr, he->level, bf, size, width);
+		return _hist_entry__sym_snprintf(&to->ms, to->al_addr,
+						 he->level, bf, size, width);
 	}
 
 	return repsep_snprintf(bf, size, "%-*.*s", width, width, "N/A");
@@ -1658,6 +1696,7 @@ static struct sort_dimension common_sort_dimensions[] = {
 	DIM(SORT_TRACE, "trace", sort_trace),
 	DIM(SORT_SYM_SIZE, "symbol_size", sort_sym_size),
 	DIM(SORT_DSO_SIZE, "dso_size", sort_dso_size),
+	DIM(SORT_CGROUP, "cgroup", sort_cgroup),
 	DIM(SORT_CGROUP_ID, "cgroup_id", sort_cgroup_id),
 	DIM(SORT_SYM_IPC_NULL, "ipc_null", sort_sym_ipc_null),
 	DIM(SORT_TIME, "time", sort_time),
diff --git a/tools/perf/util/sort.h b/tools/perf/util/sort.h
index 6c862d6..cfa6ac6 100644
--- a/tools/perf/util/sort.h
+++ b/tools/perf/util/sort.h
@@ -101,6 +101,7 @@ struct hist_entry {
 	struct thread		*thread;
 	struct comm		*comm;
 	struct namespace_id	cgroup_id;
+	u64			cgroup;
 	u64			ip;
 	u64			transaction;
 	s32			socket;
@@ -224,6 +225,7 @@ enum sort_type {
 	SORT_TRACE,
 	SORT_SYM_SIZE,
 	SORT_DSO_SIZE,
+	SORT_CGROUP,
 	SORT_CGROUP_ID,
 	SORT_SYM_IPC_NULL,
 	SORT_TIME,
diff --git a/tools/perf/util/stat-display.c b/tools/perf/util/stat-display.c
index 76c6052..9e757d1 100644
--- a/tools/perf/util/stat-display.c
+++ b/tools/perf/util/stat-display.c
@@ -115,11 +115,11 @@ static void aggr_printout(struct perf_stat_config *config,
 			fprintf(config->output, "S%d-D%d-C%*d%s",
 				cpu_map__id_to_socket(id),
 				cpu_map__id_to_die(id),
-				config->csv_output ? 0 : -5,
+				config->csv_output ? 0 : -3,
 				cpu_map__id_to_cpu(id), config->csv_sep);
 		} else {
-			fprintf(config->output, "CPU%*d%s ",
-				config->csv_output ? 0 : -5,
+			fprintf(config->output, "CPU%*d%s",
+				config->csv_output ? 0 : -7,
 				evsel__cpus(evsel)->map[id],
 				config->csv_sep);
 		}
diff --git a/tools/perf/util/stat-shadow.c b/tools/perf/util/stat-shadow.c
index 0fd713d..03ecb8c 100644
--- a/tools/perf/util/stat-shadow.c
+++ b/tools/perf/util/stat-shadow.c
@@ -803,8 +803,11 @@ static void generic_metric(struct perf_stat_config *config,
 				     out->force_header ?
 				     (metric_name ? metric_name : name) : "", 0);
 		}
-	} else
-		print_metric(config, ctxp, NULL, NULL, "", 0);
+	} else {
+		print_metric(config, ctxp, NULL, NULL,
+			     out->force_header ?
+			     (metric_name ? metric_name : name) : "", 0);
+	}
 
 	for (i = 1; i < pctx.num_ids; i++)
 		zfree(&pctx.ids[i].name);
diff --git a/tools/perf/util/symbol-elf.c b/tools/perf/util/symbol-elf.c
index 1965aef..be5b493 100644
--- a/tools/perf/util/symbol-elf.c
+++ b/tools/perf/util/symbol-elf.c
@@ -704,9 +704,15 @@ void symsrc__destroy(struct symsrc *ss)
 	close(ss->fd);
 }
 
-bool __weak elf__needs_adjust_symbols(GElf_Ehdr ehdr)
+bool elf__needs_adjust_symbols(GElf_Ehdr ehdr)
 {
-	return ehdr.e_type == ET_EXEC || ehdr.e_type == ET_REL;
+	/*
+	 * Usually vmlinux is an ELF file with type ET_EXEC for most
+	 * architectures; except Arm64 kernel is linked with option
+	 * '-share', so need to check type ET_DYN.
+	 */
+	return ehdr.e_type == ET_EXEC || ehdr.e_type == ET_REL ||
+	       ehdr.e_type == ET_DYN;
 }
 
 int symsrc__init(struct symsrc *ss, struct dso *dso, const char *name,
diff --git a/tools/perf/util/symbol_conf.h b/tools/perf/util/symbol_conf.h
index 10f1ec3..b916afb 100644
--- a/tools/perf/util/symbol_conf.h
+++ b/tools/perf/util/symbol_conf.h
@@ -73,6 +73,7 @@ struct symbol_conf {
 	const char	*symfs;
 	int		res_sample;
 	int		pad_output_len_dso;
+	int		group_sort_idx;
 };
 
 extern struct symbol_conf symbol_conf;
diff --git a/tools/perf/util/synthetic-events.c b/tools/perf/util/synthetic-events.c
index 3f28af3..a661b122 100644
--- a/tools/perf/util/synthetic-events.c
+++ b/tools/perf/util/synthetic-events.c
@@ -16,6 +16,7 @@
 #include "util/synthetic-events.h"
 #include "util/target.h"
 #include "util/time-utils.h"
+#include "util/cgroup.h"
 #include <linux/bitops.h>
 #include <linux/kernel.h>
 #include <linux/string.h>
@@ -414,6 +415,127 @@ int perf_event__synthesize_mmap_events(struct perf_tool *tool,
 	return rc;
 }
 
+#ifdef HAVE_FILE_HANDLE
+static int perf_event__synthesize_cgroup(struct perf_tool *tool,
+					 union perf_event *event,
+					 char *path, size_t mount_len,
+					 perf_event__handler_t process,
+					 struct machine *machine)
+{
+	size_t event_size = sizeof(event->cgroup) - sizeof(event->cgroup.path);
+	size_t path_len = strlen(path) - mount_len + 1;
+	struct {
+		struct file_handle fh;
+		uint64_t cgroup_id;
+	} handle;
+	int mount_id;
+
+	while (path_len % sizeof(u64))
+		path[mount_len + path_len++] = '\0';
+
+	memset(&event->cgroup, 0, event_size);
+
+	event->cgroup.header.type = PERF_RECORD_CGROUP;
+	event->cgroup.header.size = event_size + path_len + machine->id_hdr_size;
+
+	handle.fh.handle_bytes = sizeof(handle.cgroup_id);
+	if (name_to_handle_at(AT_FDCWD, path, &handle.fh, &mount_id, 0) < 0) {
+		pr_debug("stat failed: %s\n", path);
+		return -1;
+	}
+
+	event->cgroup.id = handle.cgroup_id;
+	strncpy(event->cgroup.path, path + mount_len, path_len);
+	memset(event->cgroup.path + path_len, 0, machine->id_hdr_size);
+
+	if (perf_tool__process_synth_event(tool, event, machine, process) < 0) {
+		pr_debug("process synth event failed\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+static int perf_event__walk_cgroup_tree(struct perf_tool *tool,
+					union perf_event *event,
+					char *path, size_t mount_len,
+					perf_event__handler_t process,
+					struct machine *machine)
+{
+	size_t pos = strlen(path);
+	DIR *d;
+	struct dirent *dent;
+	int ret = 0;
+
+	if (perf_event__synthesize_cgroup(tool, event, path, mount_len,
+					  process, machine) < 0)
+		return -1;
+
+	d = opendir(path);
+	if (d == NULL) {
+		pr_debug("failed to open directory: %s\n", path);
+		return -1;
+	}
+
+	while ((dent = readdir(d)) != NULL) {
+		if (dent->d_type != DT_DIR)
+			continue;
+		if (!strcmp(dent->d_name, ".") ||
+		    !strcmp(dent->d_name, ".."))
+			continue;
+
+		/* any sane path should be less than PATH_MAX */
+		if (strlen(path) + strlen(dent->d_name) + 1 >= PATH_MAX)
+			continue;
+
+		if (path[pos - 1] != '/')
+			strcat(path, "/");
+		strcat(path, dent->d_name);
+
+		ret = perf_event__walk_cgroup_tree(tool, event, path,
+						   mount_len, process, machine);
+		if (ret < 0)
+			break;
+
+		path[pos] = '\0';
+	}
+
+	closedir(d);
+	return ret;
+}
+
+int perf_event__synthesize_cgroups(struct perf_tool *tool,
+				   perf_event__handler_t process,
+				   struct machine *machine)
+{
+	union perf_event event;
+	char cgrp_root[PATH_MAX];
+	size_t mount_len;  /* length of mount point in the path */
+
+	if (cgroupfs_find_mountpoint(cgrp_root, PATH_MAX, "perf_event") < 0) {
+		pr_debug("cannot find cgroup mount point\n");
+		return -1;
+	}
+
+	mount_len = strlen(cgrp_root);
+	/* make sure the path starts with a slash (after mount point) */
+	strcat(cgrp_root, "/");
+
+	if (perf_event__walk_cgroup_tree(tool, &event, cgrp_root, mount_len,
+					 process, machine) < 0)
+		return -1;
+
+	return 0;
+}
+#else
+int perf_event__synthesize_cgroups(struct perf_tool *tool __maybe_unused,
+				   perf_event__handler_t process __maybe_unused,
+				   struct machine *machine __maybe_unused)
+{
+	return -1;
+}
+#endif
+
 int perf_event__synthesize_modules(struct perf_tool *tool, perf_event__handler_t process,
 				   struct machine *machine)
 {
@@ -1230,6 +1352,9 @@ size_t perf_event__sample_event_size(const struct perf_sample *sample, u64 type,
 	if (type & PERF_SAMPLE_PHYS_ADDR)
 		result += sizeof(u64);
 
+	if (type & PERF_SAMPLE_CGROUP)
+		result += sizeof(u64);
+
 	if (type & PERF_SAMPLE_AUX) {
 		result += sizeof(u64);
 		result += sample->aux_sample.size;
@@ -1404,6 +1529,11 @@ int perf_event__synthesize_sample(union perf_event *event, u64 type, u64 read_fo
 		array++;
 	}
 
+	if (type & PERF_SAMPLE_CGROUP) {
+		*array = sample->cgroup;
+		array++;
+	}
+
 	if (type & PERF_SAMPLE_AUX) {
 		sz = sample->aux_sample.size;
 		*array++ = sz;
diff --git a/tools/perf/util/synthetic-events.h b/tools/perf/util/synthetic-events.h
index baead0c..e7a3e95 100644
--- a/tools/perf/util/synthetic-events.h
+++ b/tools/perf/util/synthetic-events.h
@@ -45,6 +45,7 @@ int perf_event__synthesize_kernel_mmap(struct perf_tool *tool, perf_event__handl
 int perf_event__synthesize_mmap_events(struct perf_tool *tool, union perf_event *event, pid_t pid, pid_t tgid, perf_event__handler_t process, struct machine *machine, bool mmap_data);
 int perf_event__synthesize_modules(struct perf_tool *tool, perf_event__handler_t process, struct machine *machine);
 int perf_event__synthesize_namespaces(struct perf_tool *tool, union perf_event *event, pid_t pid, pid_t tgid, perf_event__handler_t process, struct machine *machine);
+int perf_event__synthesize_cgroups(struct perf_tool *tool, perf_event__handler_t process, struct machine *machine);
 int perf_event__synthesize_sample(union perf_event *event, u64 type, u64 read_format, const struct perf_sample *sample);
 int perf_event__synthesize_stat_config(struct perf_tool *tool, struct perf_stat_config *config, perf_event__handler_t process, struct machine *machine);
 int perf_event__synthesize_stat_events(struct perf_stat_config *config, struct perf_tool *tool, struct evlist *evlist, perf_event__handler_t process, bool attrs);
diff --git a/tools/perf/util/tool.h b/tools/perf/util/tool.h
index 2abbf66..3fb67bd 100644
--- a/tools/perf/util/tool.h
+++ b/tools/perf/util/tool.h
@@ -46,6 +46,7 @@ struct perf_tool {
 			mmap2,
 			comm,
 			namespaces,
+			cgroup,
 			fork,
 			exit,
 			lost,
@@ -78,6 +79,7 @@ struct perf_tool {
 	bool		ordered_events;
 	bool		ordering_requires_timestamps;
 	bool		namespace_events;
+	bool		cgroup_events;
 	bool		no_warn;
 	enum show_feature_header show_feat_hdr;
 };
diff --git a/tools/power/acpi/.gitignore b/tools/power/acpi/.gitignore
index f698a0e..0b319fc 100644
--- a/tools/power/acpi/.gitignore
+++ b/tools/power/acpi/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 /acpidbg
 /acpidump
 /ec
diff --git a/tools/power/cpupower/.gitignore b/tools/power/cpupower/.gitignore
index 1f9977c..7677329 100644
--- a/tools/power/cpupower/.gitignore
+++ b/tools/power/cpupower/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 .libs
 libcpupower.so
 libcpupower.so.*
diff --git a/tools/power/x86/intel-speed-select/.gitignore b/tools/power/x86/intel-speed-select/.gitignore
index f611459..a814f89 100644
--- a/tools/power/x86/intel-speed-select/.gitignore
+++ b/tools/power/x86/intel-speed-select/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 include/
 intel-speed-select
diff --git a/tools/power/x86/turbostat/.gitignore b/tools/power/x86/turbostat/.gitignore
index 7521370..e13109b 100644
--- a/tools/power/x86/turbostat/.gitignore
+++ b/tools/power/x86/turbostat/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 turbostat
diff --git a/tools/spi/.gitignore b/tools/spi/.gitignore
index 4280576..14ddba3 100644
--- a/tools/spi/.gitignore
+++ b/tools/spi/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 spidev_fdx
 spidev_test
diff --git a/tools/testing/kunit/.gitignore b/tools/testing/kunit/.gitignore
index c791ff5..1c63e31 100644
--- a/tools/testing/kunit/.gitignore
+++ b/tools/testing/kunit/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 # Byte-compiled / optimized / DLL files
 __pycache__/
 *.py[cod]
\ No newline at end of file
diff --git a/tools/testing/nvdimm/Kbuild b/tools/testing/nvdimm/Kbuild
index dbebf05..47f9cc9 100644
--- a/tools/testing/nvdimm/Kbuild
+++ b/tools/testing/nvdimm/Kbuild
@@ -21,8 +21,8 @@
 NVDIMM_SRC := $(DRIVERS)/nvdimm
 ACPI_SRC := $(DRIVERS)/acpi/nfit
 DAX_SRC := $(DRIVERS)/dax
-ccflags-y := -I$(src)/$(NVDIMM_SRC)/
-ccflags-y += -I$(src)/$(ACPI_SRC)/
+ccflags-y := -I$(srctree)/drivers/nvdimm/
+ccflags-y += -I$(srctree)/drivers/acpi/nfit/
 
 obj-$(CONFIG_LIBNVDIMM) += libnvdimm.o
 obj-$(CONFIG_BLK_DEV_PMEM) += nd_pmem.o
diff --git a/tools/testing/nvdimm/test/Kbuild b/tools/testing/nvdimm/test/Kbuild
index fb3c3d7..75baebf 100644
--- a/tools/testing/nvdimm/test/Kbuild
+++ b/tools/testing/nvdimm/test/Kbuild
@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
-ccflags-y := -I$(src)/../../../../drivers/nvdimm/
-ccflags-y += -I$(src)/../../../../drivers/acpi/nfit/
+ccflags-y := -I$(srctree)/drivers/nvdimm/
+ccflags-y += -I$(srctree)/drivers/acpi/nfit/
 
 obj-m += nfit_test.o
 obj-m += nfit_test_iomap.o
diff --git a/tools/testing/nvdimm/test/nfit.c b/tools/testing/nvdimm/test/nfit.c
index bf6422a..a8ee5c4 100644
--- a/tools/testing/nvdimm/test/nfit.c
+++ b/tools/testing/nvdimm/test/nfit.c
@@ -3164,7 +3164,9 @@ static __init int nfit_test_init(void)
 	mcsafe_test();
 	dax_pmem_test();
 	dax_pmem_core_test();
+#ifdef CONFIG_DEV_DAX_PMEM_COMPAT
 	dax_pmem_compat_test();
+#endif
 
 	nfit_test_setup(nfit_test_lookup, nfit_test_evaluate_dsm);
 
diff --git a/tools/testing/radix-tree/.gitignore b/tools/testing/radix-tree/.gitignore
index 3834899..d971516 100644
--- a/tools/testing/radix-tree/.gitignore
+++ b/tools/testing/radix-tree/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 generated/map-shift.h
 idr.c
 idr-test
diff --git a/tools/testing/selftests/.gitignore b/tools/testing/selftests/.gitignore
index 304fdf1..055a501 100644
--- a/tools/testing/selftests/.gitignore
+++ b/tools/testing/selftests/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 gpiogpio-event-mon
 gpiogpio-hammer
 gpioinclude/
diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile
index 0635684..2ff6870 100644
--- a/tools/testing/selftests/Makefile
+++ b/tools/testing/selftests/Makefile
@@ -38,6 +38,7 @@
 TARGETS += netfilter
 TARGETS += nsfs
 TARGETS += pidfd
+TARGETS += pid_namespace
 TARGETS += powerpc
 TARGETS += proc
 TARGETS += pstore
diff --git a/tools/testing/selftests/android/ion/.gitignore b/tools/testing/selftests/android/ion/.gitignore
index 95e8f45..78eae99 100644
--- a/tools/testing/selftests/android/ion/.gitignore
+++ b/tools/testing/selftests/android/ion/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 ionapp_export
 ionapp_import
 ionmap_test
diff --git a/tools/testing/selftests/arm64/signal/.gitignore b/tools/testing/selftests/arm64/signal/.gitignore
index 3c5b4e8..78c9020 100644
--- a/tools/testing/selftests/arm64/signal/.gitignore
+++ b/tools/testing/selftests/arm64/signal/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 mangle_*
 fake_sigreturn_*
 !*.[ch]
diff --git a/tools/testing/selftests/arm64/tags/.gitignore b/tools/testing/selftests/arm64/tags/.gitignore
index e8fae8d..f4f6c51 100644
--- a/tools/testing/selftests/arm64/tags/.gitignore
+++ b/tools/testing/selftests/arm64/tags/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 tags_test
diff --git a/tools/testing/selftests/bpf/.gitignore b/tools/testing/selftests/bpf/.gitignore
index 2198cd8..c30079c 100644
--- a/tools/testing/selftests/bpf/.gitignore
+++ b/tools/testing/selftests/bpf/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 test_verifier
 test_maps
 test_lru_map
diff --git a/tools/testing/selftests/bpf/map_tests/.gitignore b/tools/testing/selftests/bpf/map_tests/.gitignore
index 45984a3..89c4a3d 100644
--- a/tools/testing/selftests/bpf/map_tests/.gitignore
+++ b/tools/testing/selftests/bpf/map_tests/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 tests.h
diff --git a/tools/testing/selftests/bpf/prog_tests/.gitignore b/tools/testing/selftests/bpf/prog_tests/.gitignore
index 45984a3..89c4a3d 100644
--- a/tools/testing/selftests/bpf/prog_tests/.gitignore
+++ b/tools/testing/selftests/bpf/prog_tests/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 tests.h
diff --git a/tools/testing/selftests/bpf/prog_tests/mmap.c b/tools/testing/selftests/bpf/prog_tests/mmap.c
index 16a814e..56d80ad 100644
--- a/tools/testing/selftests/bpf/prog_tests/mmap.c
+++ b/tools/testing/selftests/bpf/prog_tests/mmap.c
@@ -19,15 +19,16 @@ void test_mmap(void)
 	const size_t map_sz = roundup_page(sizeof(struct map_data));
 	const int zero = 0, one = 1, two = 2, far = 1500;
 	const long page_size = sysconf(_SC_PAGE_SIZE);
-	int err, duration = 0, i, data_map_fd;
+	int err, duration = 0, i, data_map_fd, data_map_id, tmp_fd;
 	struct bpf_map *data_map, *bss_map;
 	void *bss_mmaped = NULL, *map_mmaped = NULL, *tmp1, *tmp2;
 	struct test_mmap__bss *bss_data;
+	struct bpf_map_info map_info;
+	__u32 map_info_sz = sizeof(map_info);
 	struct map_data *map_data;
 	struct test_mmap *skel;
 	__u64 val = 0;
 
-
 	skel = test_mmap__open_and_load();
 	if (CHECK(!skel, "skel_open_and_load", "skeleton open/load failed\n"))
 		return;
@@ -36,6 +37,14 @@ void test_mmap(void)
 	data_map = skel->maps.data_map;
 	data_map_fd = bpf_map__fd(data_map);
 
+	/* get map's ID */
+	memset(&map_info, 0, map_info_sz);
+	err = bpf_obj_get_info_by_fd(data_map_fd, &map_info, &map_info_sz);
+	if (CHECK(err, "map_get_info", "failed %d\n", errno))
+		goto cleanup;
+	data_map_id = map_info.id;
+
+	/* mmap BSS map */
 	bss_mmaped = mmap(NULL, bss_sz, PROT_READ | PROT_WRITE, MAP_SHARED,
 			  bpf_map__fd(bss_map), 0);
 	if (CHECK(bss_mmaped == MAP_FAILED, "bss_mmap",
@@ -98,6 +107,10 @@ void test_mmap(void)
 		  "data_map freeze succeeded: err=%d, errno=%d\n", err, errno))
 		goto cleanup;
 
+	err = mprotect(map_mmaped, map_sz, PROT_READ);
+	if (CHECK(err, "mprotect_ro", "mprotect to r/o failed %d\n", errno))
+		goto cleanup;
+
 	/* unmap R/W mapping */
 	err = munmap(map_mmaped, map_sz);
 	map_mmaped = NULL;
@@ -111,6 +124,12 @@ void test_mmap(void)
 		map_mmaped = NULL;
 		goto cleanup;
 	}
+	err = mprotect(map_mmaped, map_sz, PROT_WRITE);
+	if (CHECK(!err, "mprotect_wr", "mprotect() succeeded unexpectedly!\n"))
+		goto cleanup;
+	err = mprotect(map_mmaped, map_sz, PROT_EXEC);
+	if (CHECK(!err, "mprotect_ex", "mprotect() succeeded unexpectedly!\n"))
+		goto cleanup;
 	map_data = map_mmaped;
 
 	/* map/unmap in a loop to test ref counting */
@@ -197,6 +216,45 @@ void test_mmap(void)
 	CHECK_FAIL(map_data->val[far] != 3 * 321);
 
 	munmap(tmp2, 4 * page_size);
+
+	tmp1 = mmap(NULL, map_sz, PROT_READ, MAP_SHARED, data_map_fd, 0);
+	if (CHECK(tmp1 == MAP_FAILED, "last_mmap", "failed %d\n", errno))
+		goto cleanup;
+
+	test_mmap__destroy(skel);
+	skel = NULL;
+	CHECK_FAIL(munmap(bss_mmaped, bss_sz));
+	bss_mmaped = NULL;
+	CHECK_FAIL(munmap(map_mmaped, map_sz));
+	map_mmaped = NULL;
+
+	/* map should be still held by active mmap */
+	tmp_fd = bpf_map_get_fd_by_id(data_map_id);
+	if (CHECK(tmp_fd < 0, "get_map_by_id", "failed %d\n", errno)) {
+		munmap(tmp1, map_sz);
+		goto cleanup;
+	}
+	close(tmp_fd);
+
+	/* this should release data map finally */
+	munmap(tmp1, map_sz);
+
+	/* we need to wait for RCU grace period */
+	for (i = 0; i < 10000; i++) {
+		__u32 id = data_map_id - 1;
+		if (bpf_map_get_next_id(id, &id) || id > data_map_id)
+			break;
+		usleep(1);
+	}
+
+	/* should fail to get map FD by non-existing ID */
+	tmp_fd = bpf_map_get_fd_by_id(data_map_id);
+	if (CHECK(tmp_fd >= 0, "get_map_by_id_after",
+		  "unexpectedly succeeded %d\n", tmp_fd)) {
+		close(tmp_fd);
+		goto cleanup;
+	}
+
 cleanup:
 	if (bss_mmaped)
 		CHECK_FAIL(munmap(bss_mmaped, bss_sz));
diff --git a/tools/testing/selftests/bpf/prog_tests/section_names.c b/tools/testing/selftests/bpf/prog_tests/section_names.c
index 9d9351d..7131674 100644
--- a/tools/testing/selftests/bpf/prog_tests/section_names.c
+++ b/tools/testing/selftests/bpf/prog_tests/section_names.c
@@ -43,18 +43,18 @@ static struct sec_name_test tests[] = {
 	{"lwt_seg6local", {0, BPF_PROG_TYPE_LWT_SEG6LOCAL, 0}, {-EINVAL, 0} },
 	{
 		"cgroup_skb/ingress",
-		{0, BPF_PROG_TYPE_CGROUP_SKB, 0},
+		{0, BPF_PROG_TYPE_CGROUP_SKB, BPF_CGROUP_INET_INGRESS},
 		{0, BPF_CGROUP_INET_INGRESS},
 	},
 	{
 		"cgroup_skb/egress",
-		{0, BPF_PROG_TYPE_CGROUP_SKB, 0},
+		{0, BPF_PROG_TYPE_CGROUP_SKB, BPF_CGROUP_INET_EGRESS},
 		{0, BPF_CGROUP_INET_EGRESS},
 	},
 	{"cgroup/skb", {0, BPF_PROG_TYPE_CGROUP_SKB, 0}, {-EINVAL, 0} },
 	{
 		"cgroup/sock",
-		{0, BPF_PROG_TYPE_CGROUP_SOCK, 0},
+		{0, BPF_PROG_TYPE_CGROUP_SOCK, BPF_CGROUP_INET_SOCK_CREATE},
 		{0, BPF_CGROUP_INET_SOCK_CREATE},
 	},
 	{
@@ -69,26 +69,38 @@ static struct sec_name_test tests[] = {
 	},
 	{
 		"cgroup/dev",
-		{0, BPF_PROG_TYPE_CGROUP_DEVICE, 0},
+		{0, BPF_PROG_TYPE_CGROUP_DEVICE, BPF_CGROUP_DEVICE},
 		{0, BPF_CGROUP_DEVICE},
 	},
-	{"sockops", {0, BPF_PROG_TYPE_SOCK_OPS, 0}, {0, BPF_CGROUP_SOCK_OPS} },
+	{
+		"sockops",
+		{0, BPF_PROG_TYPE_SOCK_OPS, BPF_CGROUP_SOCK_OPS},
+		{0, BPF_CGROUP_SOCK_OPS},
+	},
 	{
 		"sk_skb/stream_parser",
-		{0, BPF_PROG_TYPE_SK_SKB, 0},
+		{0, BPF_PROG_TYPE_SK_SKB, BPF_SK_SKB_STREAM_PARSER},
 		{0, BPF_SK_SKB_STREAM_PARSER},
 	},
 	{
 		"sk_skb/stream_verdict",
-		{0, BPF_PROG_TYPE_SK_SKB, 0},
+		{0, BPF_PROG_TYPE_SK_SKB, BPF_SK_SKB_STREAM_VERDICT},
 		{0, BPF_SK_SKB_STREAM_VERDICT},
 	},
 	{"sk_skb", {0, BPF_PROG_TYPE_SK_SKB, 0}, {-EINVAL, 0} },
-	{"sk_msg", {0, BPF_PROG_TYPE_SK_MSG, 0}, {0, BPF_SK_MSG_VERDICT} },
-	{"lirc_mode2", {0, BPF_PROG_TYPE_LIRC_MODE2, 0}, {0, BPF_LIRC_MODE2} },
+	{
+		"sk_msg",
+		{0, BPF_PROG_TYPE_SK_MSG, BPF_SK_MSG_VERDICT},
+		{0, BPF_SK_MSG_VERDICT},
+	},
+	{
+		"lirc_mode2",
+		{0, BPF_PROG_TYPE_LIRC_MODE2, BPF_LIRC_MODE2},
+		{0, BPF_LIRC_MODE2},
+	},
 	{
 		"flow_dissector",
-		{0, BPF_PROG_TYPE_FLOW_DISSECTOR, 0},
+		{0, BPF_PROG_TYPE_FLOW_DISSECTOR, BPF_FLOW_DISSECTOR},
 		{0, BPF_FLOW_DISSECTOR},
 	},
 	{
@@ -158,17 +170,17 @@ static void test_prog_type_by_name(const struct sec_name_test *test)
 				      &expected_attach_type);
 
 	CHECK(rc != test->expected_load.rc, "check_code",
-	      "prog: unexpected rc=%d for %s", rc, test->sec_name);
+	      "prog: unexpected rc=%d for %s\n", rc, test->sec_name);
 
 	if (rc)
 		return;
 
 	CHECK(prog_type != test->expected_load.prog_type, "check_prog_type",
-	      "prog: unexpected prog_type=%d for %s",
+	      "prog: unexpected prog_type=%d for %s\n",
 	      prog_type, test->sec_name);
 
 	CHECK(expected_attach_type != test->expected_load.expected_attach_type,
-	      "check_attach_type", "prog: unexpected expected_attach_type=%d for %s",
+	      "check_attach_type", "prog: unexpected expected_attach_type=%d for %s\n",
 	      expected_attach_type, test->sec_name);
 }
 
@@ -180,13 +192,13 @@ static void test_attach_type_by_name(const struct sec_name_test *test)
 	rc = libbpf_attach_type_by_name(test->sec_name, &attach_type);
 
 	CHECK(rc != test->expected_attach.rc, "check_ret",
-	      "attach: unexpected rc=%d for %s", rc, test->sec_name);
+	      "attach: unexpected rc=%d for %s\n", rc, test->sec_name);
 
 	if (rc)
 		return;
 
 	CHECK(attach_type != test->expected_attach.attach_type,
-	      "check_attach_type", "attach: unexpected attach_type=%d for %s",
+	      "check_attach_type", "attach: unexpected attach_type=%d for %s\n",
 	      attach_type, test->sec_name);
 }
 
diff --git a/tools/testing/selftests/bpf/prog_tests/test_lsm.c b/tools/testing/selftests/bpf/prog_tests/test_lsm.c
index 1e4c258..b17eb20 100644
--- a/tools/testing/selftests/bpf/prog_tests/test_lsm.c
+++ b/tools/testing/selftests/bpf/prog_tests/test_lsm.c
@@ -15,7 +15,10 @@
 
 char *CMD_ARGS[] = {"true", NULL};
 
-int heap_mprotect(void)
+#define GET_PAGE_ADDR(ADDR, PAGE_SIZE)					\
+	(char *)(((unsigned long) (ADDR + PAGE_SIZE)) & ~(PAGE_SIZE-1))
+
+int stack_mprotect(void)
 {
 	void *buf;
 	long sz;
@@ -25,12 +28,9 @@ int heap_mprotect(void)
 	if (sz < 0)
 		return sz;
 
-	buf = memalign(sz, 2 * sz);
-	if (buf == NULL)
-		return -ENOMEM;
-
-	ret = mprotect(buf, sz, PROT_READ | PROT_WRITE | PROT_EXEC);
-	free(buf);
+	buf = alloca(sz * 3);
+	ret = mprotect(GET_PAGE_ADDR(buf, sz), sz,
+		       PROT_READ | PROT_WRITE | PROT_EXEC);
 	return ret;
 }
 
@@ -73,8 +73,8 @@ void test_test_lsm(void)
 
 	skel->bss->monitored_pid = getpid();
 
-	err = heap_mprotect();
-	if (CHECK(errno != EPERM, "heap_mprotect", "want errno=EPERM, got %d\n",
+	err = stack_mprotect();
+	if (CHECK(errno != EPERM, "stack_mprotect", "want err=EPERM, got %d\n",
 		  errno))
 		goto close_prog;
 
diff --git a/tools/testing/selftests/bpf/prog_tests/xdp_attach.c b/tools/testing/selftests/bpf/prog_tests/xdp_attach.c
index 05b294d..15ef353 100644
--- a/tools/testing/selftests/bpf/prog_tests/xdp_attach.c
+++ b/tools/testing/selftests/bpf/prog_tests/xdp_attach.c
@@ -6,19 +6,34 @@
 
 void test_xdp_attach(void)
 {
+	__u32 duration = 0, id1, id2, id0 = 0, len;
 	struct bpf_object *obj1, *obj2, *obj3;
 	const char *file = "./test_xdp.o";
+	struct bpf_prog_info info = {};
 	int err, fd1, fd2, fd3;
-	__u32 duration = 0;
 	DECLARE_LIBBPF_OPTS(bpf_xdp_set_link_opts, opts,
 			    .old_fd = -1);
 
+	len = sizeof(info);
+
 	err = bpf_prog_load(file, BPF_PROG_TYPE_XDP, &obj1, &fd1);
 	if (CHECK_FAIL(err))
 		return;
+	err = bpf_obj_get_info_by_fd(fd1, &info, &len);
+	if (CHECK_FAIL(err))
+		goto out_1;
+	id1 = info.id;
+
 	err = bpf_prog_load(file, BPF_PROG_TYPE_XDP, &obj2, &fd2);
 	if (CHECK_FAIL(err))
 		goto out_1;
+
+	memset(&info, 0, sizeof(info));
+	err = bpf_obj_get_info_by_fd(fd2, &info, &len);
+	if (CHECK_FAIL(err))
+		goto out_2;
+	id2 = info.id;
+
 	err = bpf_prog_load(file, BPF_PROG_TYPE_XDP, &obj3, &fd3);
 	if (CHECK_FAIL(err))
 		goto out_2;
@@ -28,6 +43,11 @@ void test_xdp_attach(void)
 	if (CHECK(err, "load_ok", "initial load failed"))
 		goto out_close;
 
+	err = bpf_get_link_xdp_id(IFINDEX_LO, &id0, 0);
+	if (CHECK(err || id0 != id1, "id1_check",
+		  "loaded prog id %u != id1 %u, err %d", id0, id1, err))
+		goto out_close;
+
 	err = bpf_set_link_xdp_fd_opts(IFINDEX_LO, fd2, XDP_FLAGS_REPLACE,
 				       &opts);
 	if (CHECK(!err, "load_fail", "load with expected id didn't fail"))
@@ -37,6 +57,10 @@ void test_xdp_attach(void)
 	err = bpf_set_link_xdp_fd_opts(IFINDEX_LO, fd2, 0, &opts);
 	if (CHECK(err, "replace_ok", "replace valid old_fd failed"))
 		goto out;
+	err = bpf_get_link_xdp_id(IFINDEX_LO, &id0, 0);
+	if (CHECK(err || id0 != id2, "id2_check",
+		  "loaded prog id %u != id2 %u, err %d", id0, id2, err))
+		goto out_close;
 
 	err = bpf_set_link_xdp_fd_opts(IFINDEX_LO, fd3, 0, &opts);
 	if (CHECK(!err, "replace_fail", "replace invalid old_fd didn't fail"))
@@ -51,6 +75,10 @@ void test_xdp_attach(void)
 	if (CHECK(err, "remove_ok", "remove valid old_fd failed"))
 		goto out;
 
+	err = bpf_get_link_xdp_id(IFINDEX_LO, &id0, 0);
+	if (CHECK(err || id0 != 0, "unload_check",
+		  "loaded prog id %u != 0, err %d", id0, err))
+		goto out_close;
 out:
 	bpf_set_link_xdp_fd(IFINDEX_LO, -1, 0);
 out_close:
diff --git a/tools/testing/selftests/bpf/prog_tests/xdp_info.c b/tools/testing/selftests/bpf/prog_tests/xdp_info.c
new file mode 100644
index 0000000..d2d7a28
--- /dev/null
+++ b/tools/testing/selftests/bpf/prog_tests/xdp_info.c
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/if_link.h>
+#include <test_progs.h>
+
+#define IFINDEX_LO 1
+
+void test_xdp_info(void)
+{
+	__u32 len = sizeof(struct bpf_prog_info), duration = 0, prog_id;
+	const char *file = "./xdp_dummy.o";
+	struct bpf_prog_info info = {};
+	struct bpf_object *obj;
+	int err, prog_fd;
+
+	/* Get prog_id for XDP_ATTACHED_NONE mode */
+
+	err = bpf_get_link_xdp_id(IFINDEX_LO, &prog_id, 0);
+	if (CHECK(err, "get_xdp_none", "errno=%d\n", errno))
+		return;
+	if (CHECK(prog_id, "prog_id_none", "unexpected prog_id=%u\n", prog_id))
+		return;
+
+	err = bpf_get_link_xdp_id(IFINDEX_LO, &prog_id, XDP_FLAGS_SKB_MODE);
+	if (CHECK(err, "get_xdp_none_skb", "errno=%d\n", errno))
+		return;
+	if (CHECK(prog_id, "prog_id_none_skb", "unexpected prog_id=%u\n",
+		  prog_id))
+		return;
+
+	/* Setup prog */
+
+	err = bpf_prog_load(file, BPF_PROG_TYPE_XDP, &obj, &prog_fd);
+	if (CHECK_FAIL(err))
+		return;
+
+	err = bpf_obj_get_info_by_fd(prog_fd, &info, &len);
+	if (CHECK(err, "get_prog_info", "errno=%d\n", errno))
+		goto out_close;
+
+	err = bpf_set_link_xdp_fd(IFINDEX_LO, prog_fd, XDP_FLAGS_SKB_MODE);
+	if (CHECK(err, "set_xdp_skb", "errno=%d\n", errno))
+		goto out_close;
+
+	/* Get prog_id for single prog mode */
+
+	err = bpf_get_link_xdp_id(IFINDEX_LO, &prog_id, 0);
+	if (CHECK(err, "get_xdp", "errno=%d\n", errno))
+		goto out;
+	if (CHECK(prog_id != info.id, "prog_id", "prog_id not available\n"))
+		goto out;
+
+	err = bpf_get_link_xdp_id(IFINDEX_LO, &prog_id, XDP_FLAGS_SKB_MODE);
+	if (CHECK(err, "get_xdp_skb", "errno=%d\n", errno))
+		goto out;
+	if (CHECK(prog_id != info.id, "prog_id_skb", "prog_id not available\n"))
+		goto out;
+
+	err = bpf_get_link_xdp_id(IFINDEX_LO, &prog_id, XDP_FLAGS_DRV_MODE);
+	if (CHECK(err, "get_xdp_drv", "errno=%d\n", errno))
+		goto out;
+	if (CHECK(prog_id, "prog_id_drv", "unexpected prog_id=%u\n", prog_id))
+		goto out;
+
+out:
+	bpf_set_link_xdp_fd(IFINDEX_LO, -1, 0);
+out_close:
+	bpf_object__close(obj);
+}
diff --git a/tools/testing/selftests/bpf/progs/lsm.c b/tools/testing/selftests/bpf/progs/lsm.c
index a4e3c223..b4598d4 100644
--- a/tools/testing/selftests/bpf/progs/lsm.c
+++ b/tools/testing/selftests/bpf/progs/lsm.c
@@ -23,12 +23,12 @@ int BPF_PROG(test_int_hook, struct vm_area_struct *vma,
 		return ret;
 
 	__u32 pid = bpf_get_current_pid_tgid() >> 32;
-	int is_heap = 0;
+	int is_stack = 0;
 
-	is_heap = (vma->vm_start >= vma->vm_mm->start_brk &&
-		   vma->vm_end <= vma->vm_mm->brk);
+	is_stack = (vma->vm_start <= vma->vm_mm->start_stack &&
+		    vma->vm_end >= vma->vm_mm->start_stack);
 
-	if (is_heap && monitored_pid == pid) {
+	if (is_stack && monitored_pid == pid) {
 		mprotect_count++;
 		ret = -EPERM;
 	}
diff --git a/tools/testing/selftests/bpf/verifier/.gitignore b/tools/testing/selftests/bpf/verifier/.gitignore
index 45984a3..89c4a3d 100644
--- a/tools/testing/selftests/bpf/verifier/.gitignore
+++ b/tools/testing/selftests/bpf/verifier/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 tests.h
diff --git a/tools/testing/selftests/bpf/verifier/bounds.c b/tools/testing/selftests/bpf/verifier/bounds.c
index 4d0d095..a253a06 100644
--- a/tools/testing/selftests/bpf/verifier/bounds.c
+++ b/tools/testing/selftests/bpf/verifier/bounds.c
@@ -501,7 +501,7 @@
 	.result = REJECT
 },
 {
-	"bounds check mixed 32bit and 64bit arithmatic. test1",
+	"bounds check mixed 32bit and 64bit arithmetic. test1",
 	.insns = {
 	BPF_MOV64_IMM(BPF_REG_0, 0),
 	BPF_MOV64_IMM(BPF_REG_1, -1),
@@ -520,7 +520,7 @@
 	.result = ACCEPT
 },
 {
-	"bounds check mixed 32bit and 64bit arithmatic. test2",
+	"bounds check mixed 32bit and 64bit arithmetic. test2",
 	.insns = {
 	BPF_MOV64_IMM(BPF_REG_0, 0),
 	BPF_MOV64_IMM(BPF_REG_1, -1),
diff --git a/tools/testing/selftests/breakpoints/.gitignore b/tools/testing/selftests/breakpoints/.gitignore
index a23bb4a..def2e97 100644
--- a/tools/testing/selftests/breakpoints/.gitignore
+++ b/tools/testing/selftests/breakpoints/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 breakpoint_test
 step_after_suspend_test
diff --git a/tools/testing/selftests/capabilities/.gitignore b/tools/testing/selftests/capabilities/.gitignore
index b732dd0..426d9ad 100644
--- a/tools/testing/selftests/capabilities/.gitignore
+++ b/tools/testing/selftests/capabilities/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 test_execve
 validate_cap
diff --git a/tools/testing/selftests/cgroup/.gitignore b/tools/testing/selftests/cgroup/.gitignore
index 7f98356..aa6de65 100644
--- a/tools/testing/selftests/cgroup/.gitignore
+++ b/tools/testing/selftests/cgroup/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 test_memcontrol
 test_core
 test_freezer
diff --git a/tools/testing/selftests/cgroup/Makefile b/tools/testing/selftests/cgroup/Makefile
index 66aafe1..967f268f 100644
--- a/tools/testing/selftests/cgroup/Makefile
+++ b/tools/testing/selftests/cgroup/Makefile
@@ -11,6 +11,6 @@
 
 include ../lib.mk
 
-$(OUTPUT)/test_memcontrol: cgroup_util.c
-$(OUTPUT)/test_core: cgroup_util.c
-$(OUTPUT)/test_freezer: cgroup_util.c
+$(OUTPUT)/test_memcontrol: cgroup_util.c ../clone3/clone3_selftests.h
+$(OUTPUT)/test_core: cgroup_util.c ../clone3/clone3_selftests.h
+$(OUTPUT)/test_freezer: cgroup_util.c ../clone3/clone3_selftests.h
diff --git a/tools/testing/selftests/cgroup/cgroup_util.c b/tools/testing/selftests/cgroup/cgroup_util.c
index 8f7131d..8a637ca 100644
--- a/tools/testing/selftests/cgroup/cgroup_util.c
+++ b/tools/testing/selftests/cgroup/cgroup_util.c
@@ -15,6 +15,7 @@
 #include <unistd.h>
 
 #include "cgroup_util.h"
+#include "../clone3/clone3_selftests.h"
 
 static ssize_t read_text(const char *path, char *buf, size_t max_len)
 {
@@ -331,12 +332,112 @@ int cg_run(const char *cgroup,
 	}
 }
 
+pid_t clone_into_cgroup(int cgroup_fd)
+{
+#ifdef CLONE_ARGS_SIZE_VER2
+	pid_t pid;
+
+	struct clone_args args = {
+		.flags = CLONE_INTO_CGROUP,
+		.exit_signal = SIGCHLD,
+		.cgroup = cgroup_fd,
+	};
+
+	pid = sys_clone3(&args, sizeof(struct clone_args));
+	/*
+	 * Verify that this is a genuine test failure:
+	 * ENOSYS -> clone3() not available
+	 * E2BIG  -> CLONE_INTO_CGROUP not available
+	 */
+	if (pid < 0 && (errno == ENOSYS || errno == E2BIG))
+		goto pretend_enosys;
+
+	return pid;
+
+pretend_enosys:
+#endif
+	errno = ENOSYS;
+	return -ENOSYS;
+}
+
+int clone_reap(pid_t pid, int options)
+{
+	int ret;
+	siginfo_t info = {
+		.si_signo = 0,
+	};
+
+again:
+	ret = waitid(P_PID, pid, &info, options | __WALL | __WNOTHREAD);
+	if (ret < 0) {
+		if (errno == EINTR)
+			goto again;
+		return -1;
+	}
+
+	if (options & WEXITED) {
+		if (WIFEXITED(info.si_status))
+			return WEXITSTATUS(info.si_status);
+	}
+
+	if (options & WSTOPPED) {
+		if (WIFSTOPPED(info.si_status))
+			return WSTOPSIG(info.si_status);
+	}
+
+	if (options & WCONTINUED) {
+		if (WIFCONTINUED(info.si_status))
+			return 0;
+	}
+
+	return -1;
+}
+
+int dirfd_open_opath(const char *dir)
+{
+	return open(dir, O_DIRECTORY | O_CLOEXEC | O_NOFOLLOW | O_PATH);
+}
+
+#define close_prot_errno(fd)                                                   \
+	if (fd >= 0) {                                                         \
+		int _e_ = errno;                                               \
+		close(fd);                                                     \
+		errno = _e_;                                                   \
+	}
+
+static int clone_into_cgroup_run_nowait(const char *cgroup,
+					int (*fn)(const char *cgroup, void *arg),
+					void *arg)
+{
+	int cgroup_fd;
+	pid_t pid;
+
+	cgroup_fd =  dirfd_open_opath(cgroup);
+	if (cgroup_fd < 0)
+		return -1;
+
+	pid = clone_into_cgroup(cgroup_fd);
+	close_prot_errno(cgroup_fd);
+	if (pid == 0)
+		exit(fn(cgroup, arg));
+
+	return pid;
+}
+
 int cg_run_nowait(const char *cgroup,
 		  int (*fn)(const char *cgroup, void *arg),
 		  void *arg)
 {
 	int pid;
 
+	pid = clone_into_cgroup_run_nowait(cgroup, fn, arg);
+	if (pid > 0)
+		return pid;
+
+	/* Genuine test failure. */
+	if (pid < 0 && errno != ENOSYS)
+		return -1;
+
 	pid = fork();
 	if (pid == 0) {
 		char buf[64];
@@ -450,3 +551,28 @@ int proc_read_strstr(int pid, bool thread, const char *item, const char *needle)
 
 	return strstr(buf, needle) ? 0 : -1;
 }
+
+int clone_into_cgroup_run_wait(const char *cgroup)
+{
+	int cgroup_fd;
+	pid_t pid;
+
+	cgroup_fd =  dirfd_open_opath(cgroup);
+	if (cgroup_fd < 0)
+		return -1;
+
+	pid = clone_into_cgroup(cgroup_fd);
+	close_prot_errno(cgroup_fd);
+	if (pid < 0)
+		return -1;
+
+	if (pid == 0)
+		exit(EXIT_SUCCESS);
+
+	/*
+	 * We don't care whether this fails. We only care whether the initial
+	 * clone succeeded.
+	 */
+	(void)clone_reap(pid, WEXITED);
+	return 0;
+}
diff --git a/tools/testing/selftests/cgroup/cgroup_util.h b/tools/testing/selftests/cgroup/cgroup_util.h
index 49c54fb..5a1305d 100644
--- a/tools/testing/selftests/cgroup/cgroup_util.h
+++ b/tools/testing/selftests/cgroup/cgroup_util.h
@@ -50,3 +50,7 @@ extern int cg_wait_for_proc_count(const char *cgroup, int count);
 extern int cg_killall(const char *cgroup);
 extern ssize_t proc_read_text(int pid, bool thread, const char *item, char *buf, size_t size);
 extern int proc_read_strstr(int pid, bool thread, const char *item, const char *needle);
+extern pid_t clone_into_cgroup(int cgroup_fd);
+extern int clone_reap(pid_t pid, int options);
+extern int clone_into_cgroup_run_wait(const char *cgroup);
+extern int dirfd_open_opath(const char *dir);
diff --git a/tools/testing/selftests/cgroup/test_core.c b/tools/testing/selftests/cgroup/test_core.c
index e19ce94..3df648c 100644
--- a/tools/testing/selftests/cgroup/test_core.c
+++ b/tools/testing/selftests/cgroup/test_core.c
@@ -2,7 +2,10 @@
 
 #include <linux/limits.h>
 #include <sys/types.h>
+#include <sys/mman.h>
+#include <sys/wait.h>
 #include <unistd.h>
+#include <fcntl.h>
 #include <stdio.h>
 #include <errno.h>
 #include <signal.h>
@@ -12,6 +15,115 @@
 #include "../kselftest.h"
 #include "cgroup_util.h"
 
+static int touch_anon(char *buf, size_t size)
+{
+	int fd;
+	char *pos = buf;
+
+	fd = open("/dev/urandom", O_RDONLY);
+	if (fd < 0)
+		return -1;
+
+	while (size > 0) {
+		ssize_t ret = read(fd, pos, size);
+
+		if (ret < 0) {
+			if (errno != EINTR) {
+				close(fd);
+				return -1;
+			}
+		} else {
+			pos += ret;
+			size -= ret;
+		}
+	}
+	close(fd);
+
+	return 0;
+}
+
+static int alloc_and_touch_anon_noexit(const char *cgroup, void *arg)
+{
+	int ppid = getppid();
+	size_t size = (size_t)arg;
+	void *buf;
+
+	buf = mmap(NULL, size, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANON,
+		   0, 0);
+	if (buf == MAP_FAILED)
+		return -1;
+
+	if (touch_anon((char *)buf, size)) {
+		munmap(buf, size);
+		return -1;
+	}
+
+	while (getppid() == ppid)
+		sleep(1);
+
+	munmap(buf, size);
+	return 0;
+}
+
+/*
+ * Create a child process that allocates and touches 100MB, then waits to be
+ * killed. Wait until the child is attached to the cgroup, kill all processes
+ * in that cgroup and wait until "cgroup.procs" is empty. At this point try to
+ * destroy the empty cgroup. The test helps detect race conditions between
+ * dying processes leaving the cgroup and cgroup destruction path.
+ */
+static int test_cgcore_destroy(const char *root)
+{
+	int ret = KSFT_FAIL;
+	char *cg_test = NULL;
+	int child_pid;
+	char buf[PAGE_SIZE];
+
+	cg_test = cg_name(root, "cg_test");
+
+	if (!cg_test)
+		goto cleanup;
+
+	for (int i = 0; i < 10; i++) {
+		if (cg_create(cg_test))
+			goto cleanup;
+
+		child_pid = cg_run_nowait(cg_test, alloc_and_touch_anon_noexit,
+					  (void *) MB(100));
+
+		if (child_pid < 0)
+			goto cleanup;
+
+		/* wait for the child to enter cgroup */
+		if (cg_wait_for_proc_count(cg_test, 1))
+			goto cleanup;
+
+		if (cg_killall(cg_test))
+			goto cleanup;
+
+		/* wait for cgroup to be empty */
+		while (1) {
+			if (cg_read(cg_test, "cgroup.procs", buf, sizeof(buf)))
+				goto cleanup;
+			if (buf[0] == '\0')
+				break;
+			usleep(1000);
+		}
+
+		if (rmdir(cg_test))
+			goto cleanup;
+
+		if (waitpid(child_pid, NULL, 0) < 0)
+			goto cleanup;
+	}
+	ret = KSFT_PASS;
+cleanup:
+	if (cg_test)
+		cg_destroy(cg_test);
+	free(cg_test);
+	return ret;
+}
+
 /*
  * A(0) - B(0) - C(1)
  *        \ D(0)
@@ -25,8 +137,11 @@
 static int test_cgcore_populated(const char *root)
 {
 	int ret = KSFT_FAIL;
+	int err;
 	char *cg_test_a = NULL, *cg_test_b = NULL;
 	char *cg_test_c = NULL, *cg_test_d = NULL;
+	int cgroup_fd = -EBADF;
+	pid_t pid;
 
 	cg_test_a = cg_name(root, "cg_test_a");
 	cg_test_b = cg_name(root, "cg_test_a/cg_test_b");
@@ -78,6 +193,52 @@ static int test_cgcore_populated(const char *root)
 	if (cg_read_strcmp(cg_test_d, "cgroup.events", "populated 0\n"))
 		goto cleanup;
 
+	/* Test that we can directly clone into a new cgroup. */
+	cgroup_fd = dirfd_open_opath(cg_test_d);
+	if (cgroup_fd < 0)
+		goto cleanup;
+
+	pid = clone_into_cgroup(cgroup_fd);
+	if (pid < 0) {
+		if (errno == ENOSYS)
+			goto cleanup_pass;
+		goto cleanup;
+	}
+
+	if (pid == 0) {
+		if (raise(SIGSTOP))
+			exit(EXIT_FAILURE);
+		exit(EXIT_SUCCESS);
+	}
+
+	err = cg_read_strcmp(cg_test_d, "cgroup.events", "populated 1\n");
+
+	(void)clone_reap(pid, WSTOPPED);
+	(void)kill(pid, SIGCONT);
+	(void)clone_reap(pid, WEXITED);
+
+	if (err)
+		goto cleanup;
+
+	if (cg_read_strcmp(cg_test_d, "cgroup.events", "populated 0\n"))
+		goto cleanup;
+
+	/* Remove cgroup. */
+	if (cg_test_d) {
+		cg_destroy(cg_test_d);
+		free(cg_test_d);
+		cg_test_d = NULL;
+	}
+
+	pid = clone_into_cgroup(cgroup_fd);
+	if (pid < 0)
+		goto cleanup_pass;
+	if (pid == 0)
+		exit(EXIT_SUCCESS);
+	(void)clone_reap(pid, WEXITED);
+	goto cleanup;
+
+cleanup_pass:
 	ret = KSFT_PASS;
 
 cleanup:
@@ -93,6 +254,8 @@ static int test_cgcore_populated(const char *root)
 	free(cg_test_c);
 	free(cg_test_b);
 	free(cg_test_a);
+	if (cgroup_fd >= 0)
+		close(cgroup_fd);
 	return ret;
 }
 
@@ -136,6 +299,16 @@ static int test_cgcore_invalid_domain(const char *root)
 	if (errno != EOPNOTSUPP)
 		goto cleanup;
 
+	if (!clone_into_cgroup_run_wait(child))
+		goto cleanup;
+
+	if (errno == ENOSYS)
+		goto cleanup_pass;
+
+	if (errno != EOPNOTSUPP)
+		goto cleanup;
+
+cleanup_pass:
 	ret = KSFT_PASS;
 
 cleanup:
@@ -345,6 +518,9 @@ static int test_cgcore_internal_process_constraint(const char *root)
 	if (!cg_enter_current(parent))
 		goto cleanup;
 
+	if (!clone_into_cgroup_run_wait(parent))
+		goto cleanup;
+
 	ret = KSFT_PASS;
 
 cleanup:
@@ -512,6 +688,7 @@ struct corecg_test {
 	T(test_cgcore_populated),
 	T(test_cgcore_proc_migration),
 	T(test_cgcore_thread_migration),
+	T(test_cgcore_destroy),
 };
 #undef T
 
diff --git a/tools/testing/selftests/clone3/.gitignore b/tools/testing/selftests/clone3/.gitignore
index 0dc4f32..a810857 100644
--- a/tools/testing/selftests/clone3/.gitignore
+++ b/tools/testing/selftests/clone3/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 clone3
 clone3_clear_sighand
 clone3_set_tid
diff --git a/tools/testing/selftests/clone3/clone3_selftests.h b/tools/testing/selftests/clone3/clone3_selftests.h
index a3f2c8a..91c1a78 100644
--- a/tools/testing/selftests/clone3/clone3_selftests.h
+++ b/tools/testing/selftests/clone3/clone3_selftests.h
@@ -5,12 +5,24 @@
 
 #define _GNU_SOURCE
 #include <sched.h>
+#include <linux/sched.h>
+#include <linux/types.h>
 #include <stdint.h>
 #include <syscall.h>
-#include <linux/types.h>
+#include <sys/wait.h>
+
+#include "../kselftest.h"
 
 #define ptr_to_u64(ptr) ((__u64)((uintptr_t)(ptr)))
 
+#ifndef CLONE_INTO_CGROUP
+#define CLONE_INTO_CGROUP 0x200000000ULL /* Clone into a specific cgroup given the right permissions. */
+#endif
+
+#ifndef CLONE_ARGS_SIZE_VER0
+#define CLONE_ARGS_SIZE_VER0 64
+#endif
+
 #ifndef __NR_clone3
 #define __NR_clone3 -1
 struct clone_args {
@@ -22,10 +34,13 @@ struct clone_args {
 	__aligned_u64 stack;
 	__aligned_u64 stack_size;
 	__aligned_u64 tls;
+#define CLONE_ARGS_SIZE_VER1 80
 	__aligned_u64 set_tid;
 	__aligned_u64 set_tid_size;
+#define CLONE_ARGS_SIZE_VER2 88
+	__aligned_u64 cgroup;
 };
-#endif
+#endif /* __NR_clone3 */
 
 static pid_t sys_clone3(struct clone_args *args, size_t size)
 {
diff --git a/tools/testing/selftests/drivers/.gitignore b/tools/testing/selftests/drivers/.gitignore
index f6aebcc..ca74f2e 100644
--- a/tools/testing/selftests/drivers/.gitignore
+++ b/tools/testing/selftests/drivers/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 /dma-buf/udmabuf
diff --git a/tools/testing/selftests/efivarfs/.gitignore b/tools/testing/selftests/efivarfs/.gitignore
index 3361849..807407f 100644
--- a/tools/testing/selftests/efivarfs/.gitignore
+++ b/tools/testing/selftests/efivarfs/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 create-read
 open-unlink
diff --git a/tools/testing/selftests/exec/.gitignore b/tools/testing/selftests/exec/.gitignore
index b02279d..c078ece 100644
--- a/tools/testing/selftests/exec/.gitignore
+++ b/tools/testing/selftests/exec/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 subdir*
 script*
 execveat
diff --git a/tools/testing/selftests/filesystems/.gitignore b/tools/testing/selftests/filesystems/.gitignore
index 8449cf6..f0c0ff2 100644
--- a/tools/testing/selftests/filesystems/.gitignore
+++ b/tools/testing/selftests/filesystems/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 dnotify_test
 devpts_pts
diff --git a/tools/testing/selftests/filesystems/binderfs/.gitignore b/tools/testing/selftests/filesystems/binderfs/.gitignore
index 8a5d9bf..8e5cf90 100644
--- a/tools/testing/selftests/filesystems/binderfs/.gitignore
+++ b/tools/testing/selftests/filesystems/binderfs/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 binderfs_test
diff --git a/tools/testing/selftests/filesystems/binderfs/Makefile b/tools/testing/selftests/filesystems/binderfs/Makefile
index 58cb659..8af25ae 100644
--- a/tools/testing/selftests/filesystems/binderfs/Makefile
+++ b/tools/testing/selftests/filesystems/binderfs/Makefile
@@ -1,6 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 
-CFLAGS += -I../../../../../usr/include/
+CFLAGS += -I../../../../../usr/include/ -pthread
 TEST_GEN_PROGS := binderfs_test
 
+binderfs_test: binderfs_test.c ../../kselftest.h ../../kselftest_harness.h
+
 include ../../lib.mk
diff --git a/tools/testing/selftests/filesystems/binderfs/binderfs_test.c b/tools/testing/selftests/filesystems/binderfs/binderfs_test.c
index 8c2ed96..8a6b507 100644
--- a/tools/testing/selftests/filesystems/binderfs/binderfs_test.c
+++ b/tools/testing/selftests/filesystems/binderfs/binderfs_test.c
@@ -3,114 +3,47 @@
 #define _GNU_SOURCE
 #include <errno.h>
 #include <fcntl.h>
+#include <pthread.h>
 #include <sched.h>
 #include <stdbool.h>
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
+#include <sys/fsuid.h>
 #include <sys/ioctl.h>
 #include <sys/mount.h>
+#include <sys/socket.h>
 #include <sys/stat.h>
+#include <sys/sysinfo.h>
 #include <sys/types.h>
+#include <sys/wait.h>
 #include <unistd.h>
 #include <linux/android/binder.h>
 #include <linux/android/binderfs.h>
+
 #include "../../kselftest.h"
+#include "../../kselftest_harness.h"
 
-static ssize_t write_nointr(int fd, const void *buf, size_t count)
-{
-	ssize_t ret;
-again:
-	ret = write(fd, buf, count);
-	if (ret < 0 && errno == EINTR)
-		goto again;
+#define DEFAULT_THREADS 4
 
-	return ret;
-}
+#define PTR_TO_INT(p) ((int)((intptr_t)(p)))
+#define INT_TO_PTR(u) ((void *)((intptr_t)(u)))
 
-static void write_to_file(const char *filename, const void *buf, size_t count,
-			  int allowed_errno)
-{
-	int fd, saved_errno;
-	ssize_t ret;
-
-	fd = open(filename, O_WRONLY | O_CLOEXEC);
-	if (fd < 0)
-		ksft_exit_fail_msg("%s - Failed to open file %s\n",
-				   strerror(errno), filename);
-
-	ret = write_nointr(fd, buf, count);
-	if (ret < 0) {
-		if (allowed_errno && (errno == allowed_errno)) {
-			close(fd);
-			return;
-		}
-
-		goto on_error;
+#define close_prot_errno_disarm(fd) \
+	if (fd >= 0) {              \
+		int _e_ = errno;    \
+		close(fd);          \
+		errno = _e_;        \
+		fd = -EBADF;        \
 	}
 
-	if ((size_t)ret != count)
-		goto on_error;
+#define log_exit(format, ...)                                                  \
+	({                                                                     \
+		fprintf(stderr, format "\n", ##__VA_ARGS__);                   \
+		exit(EXIT_FAILURE);                                            \
+	})
 
-	close(fd);
-	return;
-
-on_error:
-	saved_errno = errno;
-	close(fd);
-	errno = saved_errno;
-
-	if (ret < 0)
-		ksft_exit_fail_msg("%s - Failed to write to file %s\n",
-				   strerror(errno), filename);
-
-	ksft_exit_fail_msg("Failed to write to file %s\n", filename);
-}
-
-static void change_to_userns(void)
-{
-	int ret;
-	uid_t uid;
-	gid_t gid;
-	/* {g,u}id_map files only allow a max of 4096 bytes written to them */
-	char idmap[4096];
-
-	uid = getuid();
-	gid = getgid();
-
-	ret = unshare(CLONE_NEWUSER);
-	if (ret < 0)
-		ksft_exit_fail_msg("%s - Failed to unshare user namespace\n",
-				   strerror(errno));
-
-	write_to_file("/proc/self/setgroups", "deny", strlen("deny"), ENOENT);
-
-	ret = snprintf(idmap, sizeof(idmap), "0 %d 1", uid);
-	if (ret < 0 || (size_t)ret >= sizeof(idmap))
-		ksft_exit_fail_msg("%s - Failed to prepare uid mapping\n",
-				   strerror(errno));
-
-	write_to_file("/proc/self/uid_map", idmap, strlen(idmap), 0);
-
-	ret = snprintf(idmap, sizeof(idmap), "0 %d 1", gid);
-	if (ret < 0 || (size_t)ret >= sizeof(idmap))
-		ksft_exit_fail_msg("%s - Failed to prepare uid mapping\n",
-				   strerror(errno));
-
-	write_to_file("/proc/self/gid_map", idmap, strlen(idmap), 0);
-
-	ret = setgid(0);
-	if (ret)
-		ksft_exit_fail_msg("%s - Failed to setgid(0)\n",
-				   strerror(errno));
-
-	ret = setuid(0);
-	if (ret)
-		ksft_exit_fail_msg("%s - Failed to setgid(0)\n",
-				   strerror(errno));
-}
-
-static void change_to_mountns(void)
+static void change_mountns(void)
 {
 	int ret;
 
@@ -132,36 +65,31 @@ static void rmdir_protect_errno(const char *dir)
 	errno = saved_errno;
 }
 
-static void __do_binderfs_test(void)
+static int __do_binderfs_test(void)
 {
 	int fd, ret, saved_errno;
 	size_t len;
 	ssize_t wret;
-	bool keep = false;
 	struct binderfs_device device = { 0 };
 	struct binder_version version = { 0 };
+	char binderfs_mntpt[] = P_tmpdir "/binderfs_XXXXXX",
+		device_path[sizeof(P_tmpdir "/binderfs_XXXXXX/") + BINDERFS_MAX_NAME];
 
-	change_to_mountns();
+	change_mountns();
 
-	ret = mkdir("/dev/binderfs", 0755);
-	if (ret < 0) {
-		if (errno != EEXIST)
-			ksft_exit_fail_msg(
-				"%s - Failed to create binderfs mountpoint\n",
-				strerror(errno));
+	if (!mkdtemp(binderfs_mntpt))
+		ksft_exit_fail_msg(
+			"%s - Failed to create binderfs mountpoint\n",
+			strerror(errno));
 
-		keep = true;
-	}
-
-	ret = mount(NULL, "/dev/binderfs", "binder", 0, 0);
+	ret = mount(NULL, binderfs_mntpt, "binder", 0, 0);
 	if (ret < 0) {
 		if (errno != ENODEV)
 			ksft_exit_fail_msg("%s - Failed to mount binderfs\n",
 					   strerror(errno));
 
-		keep ? : rmdir_protect_errno("/dev/binderfs");
-		ksft_exit_skip(
-			"The Android binderfs filesystem is not available\n");
+		rmdir_protect_errno(binderfs_mntpt);
+		return 1;
 	}
 
 	/* binderfs mount test passed */
@@ -169,7 +97,8 @@ static void __do_binderfs_test(void)
 
 	memcpy(device.name, "my-binder", strlen("my-binder"));
 
-	fd = open("/dev/binderfs/binder-control", O_RDONLY | O_CLOEXEC);
+	snprintf(device_path, sizeof(device_path), "%s/binder-control", binderfs_mntpt);
+	fd = open(device_path, O_RDONLY | O_CLOEXEC);
 	if (fd < 0)
 		ksft_exit_fail_msg(
 			"%s - Failed to open binder-control device\n",
@@ -180,7 +109,7 @@ static void __do_binderfs_test(void)
 	close(fd);
 	errno = saved_errno;
 	if (ret < 0) {
-		keep ? : rmdir_protect_errno("/dev/binderfs");
+		rmdir_protect_errno(binderfs_mntpt);
 		ksft_exit_fail_msg(
 			"%s - Failed to allocate new binder device\n",
 			strerror(errno));
@@ -193,9 +122,10 @@ static void __do_binderfs_test(void)
 	/* binder device allocation test passed */
 	ksft_inc_pass_cnt();
 
-	fd = open("/dev/binderfs/my-binder", O_CLOEXEC | O_RDONLY);
+	snprintf(device_path, sizeof(device_path), "%s/my-binder", binderfs_mntpt);
+	fd = open(device_path, O_CLOEXEC | O_RDONLY);
 	if (fd < 0) {
-		keep ? : rmdir_protect_errno("/dev/binderfs");
+		rmdir_protect_errno(binderfs_mntpt);
 		ksft_exit_fail_msg("%s - Failed to open my-binder device\n",
 				   strerror(errno));
 	}
@@ -205,7 +135,7 @@ static void __do_binderfs_test(void)
 	close(fd);
 	errno = saved_errno;
 	if (ret < 0) {
-		keep ? : rmdir_protect_errno("/dev/binderfs");
+		rmdir_protect_errno(binderfs_mntpt);
 		ksft_exit_fail_msg(
 			"%s - Failed to open perform BINDER_VERSION request\n",
 			strerror(errno));
@@ -217,9 +147,9 @@ static void __do_binderfs_test(void)
 	/* binder transaction with binderfs binder device passed */
 	ksft_inc_pass_cnt();
 
-	ret = unlink("/dev/binderfs/my-binder");
+	ret = unlink(device_path);
 	if (ret < 0) {
-		keep ? : rmdir_protect_errno("/dev/binderfs");
+		rmdir_protect_errno(binderfs_mntpt);
 		ksft_exit_fail_msg("%s - Failed to delete binder device\n",
 				   strerror(errno));
 	}
@@ -227,12 +157,13 @@ static void __do_binderfs_test(void)
 	/* binder device removal passed */
 	ksft_inc_pass_cnt();
 
-	ret = unlink("/dev/binderfs/binder-control");
+	snprintf(device_path, sizeof(device_path), "%s/binder-control", binderfs_mntpt);
+	ret = unlink(device_path);
 	if (!ret) {
-		keep ? : rmdir_protect_errno("/dev/binderfs");
+		rmdir_protect_errno(binderfs_mntpt);
 		ksft_exit_fail_msg("Managed to delete binder-control device\n");
 	} else if (errno != EPERM) {
-		keep ? : rmdir_protect_errno("/dev/binderfs");
+		rmdir_protect_errno(binderfs_mntpt);
 		ksft_exit_fail_msg(
 			"%s - Failed to delete binder-control device but exited with unexpected error code\n",
 			strerror(errno));
@@ -242,34 +173,341 @@ static void __do_binderfs_test(void)
 	ksft_inc_xfail_cnt();
 
 on_error:
-	ret = umount2("/dev/binderfs", MNT_DETACH);
-	keep ?: rmdir_protect_errno("/dev/binderfs");
+	ret = umount2(binderfs_mntpt, MNT_DETACH);
+	rmdir_protect_errno(binderfs_mntpt);
 	if (ret < 0)
 		ksft_exit_fail_msg("%s - Failed to unmount binderfs\n",
 				   strerror(errno));
 
 	/* binderfs unmount test passed */
 	ksft_inc_pass_cnt();
+	return 0;
 }
 
-static void binderfs_test_privileged()
+static int wait_for_pid(pid_t pid)
+{
+	int status, ret;
+
+again:
+	ret = waitpid(pid, &status, 0);
+	if (ret == -1) {
+		if (errno == EINTR)
+			goto again;
+
+		return -1;
+	}
+
+	if (!WIFEXITED(status))
+		return -1;
+
+	return WEXITSTATUS(status);
+}
+
+static int setid_userns_root(void)
+{
+	if (setuid(0))
+		return -1;
+	if (setgid(0))
+		return -1;
+
+	setfsuid(0);
+	setfsgid(0);
+
+	return 0;
+}
+
+enum idmap_type {
+	UID_MAP,
+	GID_MAP,
+};
+
+static ssize_t read_nointr(int fd, void *buf, size_t count)
+{
+	ssize_t ret;
+again:
+	ret = read(fd, buf, count);
+	if (ret < 0 && errno == EINTR)
+		goto again;
+
+	return ret;
+}
+
+static ssize_t write_nointr(int fd, const void *buf, size_t count)
+{
+	ssize_t ret;
+again:
+	ret = write(fd, buf, count);
+	if (ret < 0 && errno == EINTR)
+		goto again;
+
+	return ret;
+}
+
+static int write_id_mapping(enum idmap_type type, pid_t pid, const char *buf,
+			    size_t buf_size)
+{
+	int fd;
+	int ret;
+	char path[4096];
+
+	if (type == GID_MAP) {
+		int setgroups_fd;
+
+		snprintf(path, sizeof(path), "/proc/%d/setgroups", pid);
+		setgroups_fd = open(path, O_WRONLY | O_CLOEXEC | O_NOFOLLOW);
+		if (setgroups_fd < 0 && errno != ENOENT)
+			return -1;
+
+		if (setgroups_fd >= 0) {
+			ret = write_nointr(setgroups_fd, "deny", sizeof("deny") - 1);
+			close_prot_errno_disarm(setgroups_fd);
+			if (ret != sizeof("deny") - 1)
+				return -1;
+		}
+	}
+
+	switch (type) {
+	case UID_MAP:
+		ret = snprintf(path, sizeof(path), "/proc/%d/uid_map", pid);
+		break;
+	case GID_MAP:
+		ret = snprintf(path, sizeof(path), "/proc/%d/gid_map", pid);
+		break;
+	default:
+		return -1;
+	}
+	if (ret < 0 || ret >= sizeof(path))
+		return -E2BIG;
+
+	fd = open(path, O_WRONLY | O_CLOEXEC | O_NOFOLLOW);
+	if (fd < 0)
+		return -1;
+
+	ret = write_nointr(fd, buf, buf_size);
+	close_prot_errno_disarm(fd);
+	if (ret != buf_size)
+		return -1;
+
+	return 0;
+}
+
+static void change_userns(int syncfds[2])
+{
+	int ret;
+	char buf;
+
+	close_prot_errno_disarm(syncfds[1]);
+
+	ret = unshare(CLONE_NEWUSER);
+	if (ret < 0)
+		ksft_exit_fail_msg("%s - Failed to unshare user namespace\n",
+				   strerror(errno));
+
+	ret = write_nointr(syncfds[0], "1", 1);
+	if (ret != 1)
+		ksft_exit_fail_msg("write_nointr() failed\n");
+
+	ret = read_nointr(syncfds[0], &buf, 1);
+	if (ret != 1)
+		ksft_exit_fail_msg("read_nointr() failed\n");
+
+	close_prot_errno_disarm(syncfds[0]);
+
+	if (setid_userns_root())
+		ksft_exit_fail_msg("setid_userns_root() failed");
+}
+
+static void change_idmaps(int syncfds[2], pid_t pid)
+{
+	int ret;
+	char buf;
+	char id_map[4096];
+
+	close_prot_errno_disarm(syncfds[0]);
+
+	ret = read_nointr(syncfds[1], &buf, 1);
+	if (ret != 1)
+		ksft_exit_fail_msg("read_nointr() failed\n");
+
+	snprintf(id_map, sizeof(id_map), "0 %d 1\n", getuid());
+	ret = write_id_mapping(UID_MAP, pid, id_map, strlen(id_map));
+	if (ret)
+		ksft_exit_fail_msg("write_id_mapping(UID_MAP) failed");
+
+	snprintf(id_map, sizeof(id_map), "0 %d 1\n", getgid());
+	ret = write_id_mapping(GID_MAP, pid, id_map, strlen(id_map));
+	if (ret)
+		ksft_exit_fail_msg("write_id_mapping(GID_MAP) failed");
+
+	ret = write_nointr(syncfds[1], "1", 1);
+	if (ret != 1)
+		ksft_exit_fail_msg("write_nointr() failed");
+
+	close_prot_errno_disarm(syncfds[1]);
+}
+
+static void *binder_version_thread(void *data)
+{
+	int fd = PTR_TO_INT(data);
+	struct binder_version version = { 0 };
+	int ret;
+
+	ret = ioctl(fd, BINDER_VERSION, &version);
+	if (ret < 0)
+		ksft_print_msg("%s - Failed to open perform BINDER_VERSION request\n", strerror(errno));
+
+	pthread_exit(data);
+}
+
+/*
+ * Regression test:
+ * 2669b8b0c798 ("binder: prevent UAF for binderfs devices")
+ * f0fe2c0f050d ("binder: prevent UAF for binderfs devices II")
+ * 211b64e4b5b6 ("binderfs: use refcount for binder control devices too")
+ */
+TEST(binderfs_stress)
+{
+	int fds[1000];
+	int syncfds[2];
+	pid_t pid;
+	int fd, ret;
+	size_t len;
+	struct binderfs_device device = { 0 };
+	char binderfs_mntpt[] = P_tmpdir "/binderfs_XXXXXX",
+		device_path[sizeof(P_tmpdir "/binderfs_XXXXXX/") + BINDERFS_MAX_NAME];
+
+	ret = socketpair(PF_LOCAL, SOCK_STREAM | SOCK_CLOEXEC, 0, syncfds);
+	if (ret < 0)
+		ksft_exit_fail_msg("%s - Failed to create socket pair", strerror(errno));
+
+	pid = fork();
+	if (pid < 0) {
+		close_prot_errno_disarm(syncfds[0]);
+		close_prot_errno_disarm(syncfds[1]);
+		ksft_exit_fail_msg("%s - Failed to fork", strerror(errno));
+	}
+
+	if (pid == 0) {
+		int i, j, k, nthreads;
+		pthread_attr_t attr;
+		pthread_t threads[DEFAULT_THREADS];
+		change_userns(syncfds);
+		change_mountns();
+
+		if (!mkdtemp(binderfs_mntpt))
+			log_exit("%s - Failed to create binderfs mountpoint\n",
+				 strerror(errno));
+
+		ret = mount(NULL, binderfs_mntpt, "binder", 0, 0);
+		if (ret < 0)
+			log_exit("%s - Failed to mount binderfs\n", strerror(errno));
+
+		for (int i = 0; i < ARRAY_SIZE(fds); i++) {
+
+			snprintf(device_path, sizeof(device_path),
+				 "%s/binder-control", binderfs_mntpt);
+			fd = open(device_path, O_RDONLY | O_CLOEXEC);
+			if (fd < 0)
+				log_exit("%s - Failed to open binder-control device\n", strerror(errno));
+
+			memset(&device, 0, sizeof(device));
+			snprintf(device.name, sizeof(device.name), "%d", i);
+			ret = ioctl(fd, BINDER_CTL_ADD, &device);
+			close_prot_errno_disarm(fd);
+			if (ret < 0)
+				log_exit("%s - Failed to allocate new binder device\n", strerror(errno));
+
+			snprintf(device_path, sizeof(device_path), "%s/%d",
+				 binderfs_mntpt, i);
+			fds[i] = open(device_path, O_RDONLY | O_CLOEXEC);
+			if (fds[i] < 0)
+				log_exit("%s - Failed to open binder device\n", strerror(errno));
+		}
+
+		ret = umount2(binderfs_mntpt, MNT_DETACH);
+		rmdir_protect_errno(binderfs_mntpt);
+		if (ret < 0)
+			log_exit("%s - Failed to unmount binderfs\n", strerror(errno));
+
+		nthreads = get_nprocs_conf();
+		if (nthreads > DEFAULT_THREADS)
+			nthreads = DEFAULT_THREADS;
+
+		pthread_attr_init(&attr);
+		for (k = 0; k < ARRAY_SIZE(fds); k++) {
+			for (i = 0; i < nthreads; i++) {
+				ret = pthread_create(&threads[i], &attr, binder_version_thread, INT_TO_PTR(fds[k]));
+				if (ret) {
+					ksft_print_msg("%s - Failed to create thread %d\n", strerror(errno), i);
+					break;
+				}
+			}
+
+			for (j = 0; j < i; j++) {
+				void *fdptr = NULL;
+
+				ret = pthread_join(threads[j], &fdptr);
+				if (ret)
+					ksft_print_msg("%s - Failed to join thread %d for fd %d\n", strerror(errno), j, PTR_TO_INT(fdptr));
+			}
+		}
+		pthread_attr_destroy(&attr);
+
+		for (k = 0; k < ARRAY_SIZE(fds); k++)
+			close(fds[k]);
+
+		exit(EXIT_SUCCESS);
+	}
+
+	change_idmaps(syncfds, pid);
+
+	ret = wait_for_pid(pid);
+	if (ret)
+		ksft_exit_fail_msg("wait_for_pid() failed");
+}
+
+TEST(binderfs_test_privileged)
 {
 	if (geteuid() != 0)
-		ksft_print_msg(
-			"Tests are not run as root. Skipping privileged tests\n");
-	else
-		__do_binderfs_test();
+		XFAIL(return, "Tests are not run as root. Skipping privileged tests");
+
+	if (__do_binderfs_test() == 1)
+		XFAIL(return, "The Android binderfs filesystem is not available");
 }
 
-static void binderfs_test_unprivileged()
+TEST(binderfs_test_unprivileged)
 {
-	change_to_userns();
-	__do_binderfs_test();
+	int ret;
+	int syncfds[2];
+	pid_t pid;
+
+	ret = socketpair(PF_LOCAL, SOCK_STREAM | SOCK_CLOEXEC, 0, syncfds);
+	if (ret < 0)
+		ksft_exit_fail_msg("%s - Failed to create socket pair", strerror(errno));
+
+	pid = fork();
+	if (pid < 0) {
+		close_prot_errno_disarm(syncfds[0]);
+		close_prot_errno_disarm(syncfds[1]);
+		ksft_exit_fail_msg("%s - Failed to fork", strerror(errno));
+	}
+
+	if (pid == 0) {
+		change_userns(syncfds);
+		if (__do_binderfs_test() == 1)
+			exit(2);
+		exit(EXIT_SUCCESS);
+	}
+
+	change_idmaps(syncfds, pid);
+
+	ret = wait_for_pid(pid);
+	if (ret) {
+		if (ret == 2)
+			XFAIL(return, "The Android binderfs filesystem is not available");
+		else
+			ksft_exit_fail_msg("wait_for_pid() failed");
+	}
 }
 
-int main(int argc, char *argv[])
-{
-	binderfs_test_privileged();
-	binderfs_test_unprivileged();
-	ksft_exit_pass();
-}
+TEST_HARNESS_MAIN
diff --git a/tools/testing/selftests/filesystems/epoll/.gitignore b/tools/testing/selftests/filesystems/epoll/.gitignore
index 9ae8db4..9090157 100644
--- a/tools/testing/selftests/filesystems/epoll/.gitignore
+++ b/tools/testing/selftests/filesystems/epoll/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 epoll_wakeup_test
diff --git a/tools/testing/selftests/filesystems/epoll/epoll_wakeup_test.c b/tools/testing/selftests/filesystems/epoll/epoll_wakeup_test.c
index 37a04da..11eee0b 100644
--- a/tools/testing/selftests/filesystems/epoll/epoll_wakeup_test.c
+++ b/tools/testing/selftests/filesystems/epoll/epoll_wakeup_test.c
@@ -7,13 +7,14 @@
 #include <pthread.h>
 #include <sys/epoll.h>
 #include <sys/socket.h>
+#include <sys/eventfd.h>
 #include "../../kselftest_harness.h"
 
 struct epoll_mtcontext
 {
 	int efd[3];
 	int sfd[4];
-	int count;
+	volatile int count;
 
 	pthread_t main;
 	pthread_t waiter;
@@ -3071,4 +3072,68 @@ TEST(epoll58)
 	close(ctx.sfd[3]);
 }
 
+static void *epoll59_thread(void *ctx_)
+{
+	struct epoll_mtcontext *ctx = ctx_;
+	struct epoll_event e;
+	int i;
+
+	for (i = 0; i < 100000; i++) {
+		while (ctx->count == 0)
+			;
+
+		e.events = EPOLLIN | EPOLLERR | EPOLLET;
+		epoll_ctl(ctx->efd[0], EPOLL_CTL_MOD, ctx->sfd[0], &e);
+		ctx->count = 0;
+	}
+
+	return NULL;
+}
+
+/*
+ *        t0
+ *      (p) \
+ *           e0
+ *     (et) /
+ *        e0
+ *
+ * Based on https://bugzilla.kernel.org/show_bug.cgi?id=205933
+ */
+TEST(epoll59)
+{
+	pthread_t emitter;
+	struct pollfd pfd;
+	struct epoll_event e;
+	struct epoll_mtcontext ctx = { 0 };
+	int i, ret;
+
+	signal(SIGUSR1, signal_handler);
+
+	ctx.efd[0] = epoll_create1(0);
+	ASSERT_GE(ctx.efd[0], 0);
+
+	ctx.sfd[0] = eventfd(1, 0);
+	ASSERT_GE(ctx.sfd[0], 0);
+
+	e.events = EPOLLIN | EPOLLERR | EPOLLET;
+	ASSERT_EQ(epoll_ctl(ctx.efd[0], EPOLL_CTL_ADD, ctx.sfd[0], &e), 0);
+
+	ASSERT_EQ(pthread_create(&emitter, NULL, epoll59_thread, &ctx), 0);
+
+	for (i = 0; i < 100000; i++) {
+		ret = epoll_wait(ctx.efd[0], &e, 1, 1000);
+		ASSERT_GT(ret, 0);
+
+		while (ctx.count != 0)
+			;
+		ctx.count = 1;
+	}
+	if (pthread_tryjoin_np(emitter, NULL) < 0) {
+		pthread_kill(emitter, SIGUSR1);
+		pthread_join(emitter, NULL);
+	}
+	close(ctx.efd[0]);
+	close(ctx.sfd[0]);
+}
+
 TEST_HARNESS_MAIN
diff --git a/tools/testing/selftests/ftrace/.gitignore b/tools/testing/selftests/ftrace/.gitignore
index 98d8a5a6..2659417c 100644
--- a/tools/testing/selftests/ftrace/.gitignore
+++ b/tools/testing/selftests/ftrace/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 logs
diff --git a/tools/testing/selftests/ftrace/test.d/event/event-no-pid.tc b/tools/testing/selftests/ftrace/test.d/event/event-no-pid.tc
new file mode 100644
index 0000000..f0f366f
--- /dev/null
+++ b/tools/testing/selftests/ftrace/test.d/event/event-no-pid.tc
@@ -0,0 +1,125 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+# description: event tracing - restricts events based on pid notrace filtering
+# flags: instance
+
+do_reset() {
+    echo > set_event
+    echo > set_event_pid
+    echo > set_event_notrace_pid
+    echo 0 > options/event-fork
+    echo 0 > events/enable
+    clear_trace
+    echo 1 > tracing_on
+}
+
+fail() { #msg
+    cat trace
+    do_reset
+    echo $1
+    exit_fail
+}
+
+count_pid() {
+    pid=$@
+    cat trace | grep -v '^#' | sed -e 's/[^-]*-\([0-9]*\).*/\1/' | grep $pid | wc -l
+}
+
+count_no_pid() {
+    pid=$1
+    cat trace | grep -v '^#' | sed -e 's/[^-]*-\([0-9]*\).*/\1/' | grep -v $pid | wc -l
+}
+
+enable_system() {
+    system=$1
+
+    if [ -d events/$system ]; then
+	echo 1 > events/$system/enable
+    fi
+}
+
+enable_events() {
+    echo 0 > tracing_on
+    # Enable common groups of events, as all events can allow for
+    # events to be traced via scheduling that we don't care to test.
+    enable_system syscalls
+    enable_system rcu
+    enable_system block
+    enable_system exceptions
+    enable_system irq
+    enable_system net
+    enable_system power
+    enable_system signal
+    enable_system sock
+    enable_system timer
+    enable_system thermal
+    echo 1 > tracing_on
+}
+
+if [ ! -f set_event -o ! -d events/sched ]; then
+    echo "event tracing is not supported"
+    exit_unsupported
+fi
+
+if [ ! -f set_event_pid -o ! -f set_event_notrace_pid ]; then
+    echo "event pid notrace filtering is not supported"
+    exit_unsupported
+fi
+
+echo 0 > options/event-fork
+
+do_reset
+
+read mypid rest < /proc/self/stat
+
+echo $mypid > set_event_notrace_pid
+grep -q $mypid set_event_notrace_pid
+
+enable_events
+
+yield
+
+echo 0 > tracing_on
+
+cnt=`count_pid $mypid`
+if [ $cnt -ne 0 ]; then
+    fail "Filtered out task has events"
+fi
+
+cnt=`count_no_pid $mypid`
+if [ $cnt -eq 0 ]; then
+    fail "No other events were recorded"
+fi
+
+do_reset
+
+echo $mypid > set_event_notrace_pid
+echo 1 > options/event-fork
+
+enable_events
+
+yield &
+child=$!
+echo "child = $child"
+wait $child
+
+echo 0 > tracing_on
+
+cnt=`count_pid $mypid`
+if [ $cnt -ne 0 ]; then
+    fail "Filtered out task has events"
+fi
+
+cnt=`count_pid $child`
+if [ $cnt -ne 0 ]; then
+    fail "Child of filtered out taskhas events"
+fi
+
+cnt=`count_no_pid $mypid`
+if [ $cnt -eq 0 ]; then
+    fail "No other events were recorded"
+fi
+
+do_reset
+
+exit 0
diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-notrace-pid.tc b/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-notrace-pid.tc
new file mode 100644
index 0000000..8aa46a2
--- /dev/null
+++ b/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-notrace-pid.tc
@@ -0,0 +1,108 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+# description: ftrace - function pid notrace filters
+# flags: instance
+
+# Make sure that function pid matching filter with notrace works.
+
+if ! grep -q function available_tracers; then
+    echo "no function tracer configured"
+    exit_unsupported
+fi
+
+if [ ! -f set_ftrace_notrace_pid ]; then
+    echo "set_ftrace_notrace_pid not found? Is function tracer not set?"
+    exit_unsupported
+fi
+
+if [ ! -f set_ftrace_filter ]; then
+    echo "set_ftrace_filter not found? Is function tracer not set?"
+    exit_unsupported
+fi
+
+do_function_fork=1
+
+if [ ! -f options/function-fork ]; then
+    do_function_fork=0
+    echo "no option for function-fork found. Option will not be tested."
+fi
+
+read PID _ < /proc/self/stat
+
+if [ $do_function_fork -eq 1 ]; then
+    # default value of function-fork option
+    orig_value=`grep function-fork trace_options`
+fi
+
+do_reset() {
+    if [ $do_function_fork -eq 0 ]; then
+	return
+    fi
+
+    echo > set_ftrace_notrace_pid
+    echo $orig_value > trace_options
+}
+
+fail() { # msg
+    do_reset
+    echo $1
+    exit_fail
+}
+
+do_test() {
+    disable_tracing
+
+    echo do_execve* > set_ftrace_filter
+    echo *do_fork >> set_ftrace_filter
+
+    echo $PID > set_ftrace_notrace_pid
+    echo function > current_tracer
+
+    if [ $do_function_fork -eq 1 ]; then
+	# don't allow children to be traced
+	echo nofunction-fork > trace_options
+    fi
+
+    enable_tracing
+    yield
+
+    count_pid=`cat trace | grep -v ^# | grep $PID | wc -l`
+    count_other=`cat trace | grep -v ^# | grep -v $PID | wc -l`
+
+    # count_pid should be 0
+    if [ $count_pid -ne 0 -o $count_other -eq 0 ]; then
+	fail "PID filtering not working? traced task = $count_pid; other tasks = $count_other "
+    fi
+
+    disable_tracing
+    clear_trace
+
+    if [ $do_function_fork -eq 0 ]; then
+	return
+    fi
+
+    # allow children to be traced
+    echo function-fork > trace_options
+
+    # With pid in both set_ftrace_pid and set_ftrace_notrace_pid
+    # there should not be any tasks traced.
+
+    echo $PID > set_ftrace_pid
+
+    enable_tracing
+    yield
+
+    count_pid=`cat trace | grep -v ^# | grep $PID | wc -l`
+    count_other=`cat trace | grep -v ^# | grep -v $PID | wc -l`
+
+    # both should be zero
+    if [ $count_pid -ne 0 -o $count_other -ne 0 ]; then
+	fail "PID filtering not following fork? traced task = $count_pid; other tasks = $count_other "
+    fi
+}
+
+do_test
+
+do_reset
+
+exit 0
diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/func_traceonoff_triggers.tc b/tools/testing/selftests/ftrace/test.d/ftrace/func_traceonoff_triggers.tc
index 0c04282..1947387 100644
--- a/tools/testing/selftests/ftrace/test.d/ftrace/func_traceonoff_triggers.tc
+++ b/tools/testing/selftests/ftrace/test.d/ftrace/func_traceonoff_triggers.tc
@@ -41,7 +41,7 @@
 
 echo '** ENABLE EVENTS'
 
-echo 1 > events/enable
+echo 1 > events/sched/enable
 
 echo '** ENABLE TRACING'
 enable_tracing
diff --git a/tools/testing/selftests/futex/functional/.gitignore b/tools/testing/selftests/futex/functional/.gitignore
index a09f570..0efcd494 100644
--- a/tools/testing/selftests/futex/functional/.gitignore
+++ b/tools/testing/selftests/futex/functional/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 futex_requeue_pi
 futex_requeue_pi_mismatched_ops
 futex_requeue_pi_signal_restart
diff --git a/tools/testing/selftests/gpio/.gitignore b/tools/testing/selftests/gpio/.gitignore
index 7d14f74..4c69408 100644
--- a/tools/testing/selftests/gpio/.gitignore
+++ b/tools/testing/selftests/gpio/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 gpio-mockup-chardev
diff --git a/tools/testing/selftests/ia64/.gitignore b/tools/testing/selftests/ia64/.gitignore
index ab806ed..e962fb2 100644
--- a/tools/testing/selftests/ia64/.gitignore
+++ b/tools/testing/selftests/ia64/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 aliasing-test
diff --git a/tools/testing/selftests/intel_pstate/.gitignore b/tools/testing/selftests/intel_pstate/.gitignore
index 3bfcbae..862de22 100644
--- a/tools/testing/selftests/intel_pstate/.gitignore
+++ b/tools/testing/selftests/intel_pstate/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 aperf
 msr
diff --git a/tools/testing/selftests/ipc/.gitignore b/tools/testing/selftests/ipc/.gitignore
index 9af04c9..9ed280e 100644
--- a/tools/testing/selftests/ipc/.gitignore
+++ b/tools/testing/selftests/ipc/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 msgque_test
 msgque
diff --git a/tools/testing/selftests/ir/.gitignore b/tools/testing/selftests/ir/.gitignore
index 070ea0c..0bbada8 100644
--- a/tools/testing/selftests/ir/.gitignore
+++ b/tools/testing/selftests/ir/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 ir_loopback
diff --git a/tools/testing/selftests/kcmp/.gitignore b/tools/testing/selftests/kcmp/.gitignore
index 5a9b373..38ccdfe 100644
--- a/tools/testing/selftests/kcmp/.gitignore
+++ b/tools/testing/selftests/kcmp/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 kcmp_test
 kcmp-test-file
diff --git a/tools/testing/selftests/kmod/kmod.sh b/tools/testing/selftests/kmod/kmod.sh
index 8b944cf..3702dbc 100755
--- a/tools/testing/selftests/kmod/kmod.sh
+++ b/tools/testing/selftests/kmod/kmod.sh
@@ -61,6 +61,8 @@
 ALL_TESTS="$ALL_TESTS 0007:5:1"
 ALL_TESTS="$ALL_TESTS 0008:150:1"
 ALL_TESTS="$ALL_TESTS 0009:150:1"
+ALL_TESTS="$ALL_TESTS 0010:1:1"
+ALL_TESTS="$ALL_TESTS 0011:1:1"
 
 # Kselftest framework requirement - SKIP code is 4.
 ksft_skip=4
@@ -149,6 +151,7 @@
 
 test_finish()
 {
+	echo "$MODPROBE" > /proc/sys/kernel/modprobe
 	echo "Test completed"
 }
 
@@ -443,6 +446,30 @@
 	config_expect_result ${FUNCNAME[0]} SUCCESS
 }
 
+kmod_test_0010()
+{
+	kmod_defaults_driver
+	config_num_threads 1
+	echo "/KMOD_TEST_NONEXISTENT" > /proc/sys/kernel/modprobe
+	config_trigger ${FUNCNAME[0]}
+	config_expect_result ${FUNCNAME[0]} -ENOENT
+	echo "$MODPROBE" > /proc/sys/kernel/modprobe
+}
+
+kmod_test_0011()
+{
+	kmod_defaults_driver
+	config_num_threads 1
+	# This causes the kernel to not even try executing modprobe.  The error
+	# code is still -ENOENT like when modprobe doesn't exist, so we can't
+	# easily test for the exact difference.  But this still is a useful test
+	# since there was a bug where request_module() returned 0 in this case.
+	echo > /proc/sys/kernel/modprobe
+	config_trigger ${FUNCNAME[0]}
+	config_expect_result ${FUNCNAME[0]} -ENOENT
+	echo "$MODPROBE" > /proc/sys/kernel/modprobe
+}
+
 list_tests()
 {
 	echo "Test ID list:"
@@ -460,6 +487,8 @@
 	echo "0007 x $(get_test_count 0007) - multithreaded tests with default setup test request_module() and get_fs_type()"
 	echo "0008 x $(get_test_count 0008) - multithreaded - push kmod_concurrent over max_modprobes for request_module()"
 	echo "0009 x $(get_test_count 0009) - multithreaded - push kmod_concurrent over max_modprobes for get_fs_type()"
+	echo "0010 x $(get_test_count 0010) - test nonexistent modprobe path"
+	echo "0011 x $(get_test_count 0011) - test completely disabling module autoloading"
 }
 
 usage()
@@ -505,18 +534,23 @@
 	fi
 }
 
-function get_test_count()
+function get_test_data()
 {
 	test_num $1
-	TEST_DATA=$(echo $ALL_TESTS | awk '{print $'$1'}')
+	local field_num=$(echo $1 | sed 's/^0*//')
+	echo $ALL_TESTS | awk '{print $'$field_num'}'
+}
+
+function get_test_count()
+{
+	TEST_DATA=$(get_test_data $1)
 	LAST_TWO=${TEST_DATA#*:*}
 	echo ${LAST_TWO%:*}
 }
 
 function get_test_enabled()
 {
-	test_num $1
-	TEST_DATA=$(echo $ALL_TESTS | awk '{print $'$1'}')
+	TEST_DATA=$(get_test_data $1)
 	echo ${TEST_DATA#*:*:}
 }
 
@@ -611,6 +645,7 @@
 allow_user_defaults
 load_req_mod
 
+MODPROBE=$(</proc/sys/kernel/modprobe)
 trap "test_finish" EXIT
 
 parse_args $@
diff --git a/tools/testing/selftests/kvm/.gitignore b/tools/testing/selftests/kvm/.gitignore
index 16877c3..a9b2b48 100644
--- a/tools/testing/selftests/kvm/.gitignore
+++ b/tools/testing/selftests/kvm/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 /s390x/memop
 /s390x/resets
 /s390x/sync_regs_test
diff --git a/tools/testing/selftests/media_tests/.gitignore b/tools/testing/selftests/media_tests/.gitignore
index 8745eba..da438e7 100644
--- a/tools/testing/selftests/media_tests/.gitignore
+++ b/tools/testing/selftests/media_tests/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 media_device_test
 media_device_open
 video_device_test
diff --git a/tools/testing/selftests/membarrier/.gitignore b/tools/testing/selftests/membarrier/.gitignore
index f2f7ec0..f2fbba1 100644
--- a/tools/testing/selftests/membarrier/.gitignore
+++ b/tools/testing/selftests/membarrier/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 membarrier_test_multi_thread
 membarrier_test_single_thread
diff --git a/tools/testing/selftests/memfd/.gitignore b/tools/testing/selftests/memfd/.gitignore
index afe87c4..dd9a051 100644
--- a/tools/testing/selftests/memfd/.gitignore
+++ b/tools/testing/selftests/memfd/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 fuse_mnt
 fuse_test
 memfd_test
diff --git a/tools/testing/selftests/mount/.gitignore b/tools/testing/selftests/mount/.gitignore
index 856ad41..0bc64a6 100644
--- a/tools/testing/selftests/mount/.gitignore
+++ b/tools/testing/selftests/mount/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 unprivileged-remount-test
diff --git a/tools/testing/selftests/mqueue/.gitignore b/tools/testing/selftests/mqueue/.gitignore
index d8d4237..72ad8ca 100644
--- a/tools/testing/selftests/mqueue/.gitignore
+++ b/tools/testing/selftests/mqueue/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 mq_open_tests
 mq_perf_tests
diff --git a/tools/testing/selftests/net/.gitignore b/tools/testing/selftests/net/.gitignore
index 997c65d..742c499 100644
--- a/tools/testing/selftests/net/.gitignore
+++ b/tools/testing/selftests/net/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 msg_zerocopy
 socket
 psock_fanout
diff --git a/tools/testing/selftests/net/forwarding/.gitignore b/tools/testing/selftests/net/forwarding/.gitignore
index a793eef..2dea317 100644
--- a/tools/testing/selftests/net/forwarding/.gitignore
+++ b/tools/testing/selftests/net/forwarding/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 forwarding.config
diff --git a/tools/testing/selftests/net/mptcp/.gitignore b/tools/testing/selftests/net/mptcp/.gitignore
index ea13b25..260336d 100644
--- a/tools/testing/selftests/net/mptcp/.gitignore
+++ b/tools/testing/selftests/net/mptcp/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 mptcp_connect
 pm_nl_ctl
 *.pcap
diff --git a/tools/testing/selftests/nsfs/.gitignore b/tools/testing/selftests/nsfs/.gitignore
index 2ab2c82..ed79ebd 100644
--- a/tools/testing/selftests/nsfs/.gitignore
+++ b/tools/testing/selftests/nsfs/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 owner
 pidns
diff --git a/tools/testing/selftests/openat2/.gitignore b/tools/testing/selftests/openat2/.gitignore
index bd68f6c..82a4846 100644
--- a/tools/testing/selftests/openat2/.gitignore
+++ b/tools/testing/selftests/openat2/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 /*_test
diff --git a/tools/testing/selftests/pid_namespace/.gitignore b/tools/testing/selftests/pid_namespace/.gitignore
new file mode 100644
index 0000000..93ab9d7
--- /dev/null
+++ b/tools/testing/selftests/pid_namespace/.gitignore
@@ -0,0 +1 @@
+regression_enomem
diff --git a/tools/testing/selftests/pid_namespace/Makefile b/tools/testing/selftests/pid_namespace/Makefile
new file mode 100644
index 0000000..dcaefa2
--- /dev/null
+++ b/tools/testing/selftests/pid_namespace/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+CFLAGS += -g -I../../../../usr/include/
+
+TEST_GEN_PROGS := regression_enomem
+
+include ../lib.mk
+
+$(OUTPUT)/regression_enomem: regression_enomem.c ../pidfd/pidfd.h
diff --git a/tools/testing/selftests/pid_namespace/config b/tools/testing/selftests/pid_namespace/config
new file mode 100644
index 0000000..26cdb27
--- /dev/null
+++ b/tools/testing/selftests/pid_namespace/config
@@ -0,0 +1,2 @@
+CONFIG_PID_NS=y
+CONFIG_USER_NS=y
diff --git a/tools/testing/selftests/pid_namespace/regression_enomem.c b/tools/testing/selftests/pid_namespace/regression_enomem.c
new file mode 100644
index 0000000..73d5325
--- /dev/null
+++ b/tools/testing/selftests/pid_namespace/regression_enomem.c
@@ -0,0 +1,45 @@
+#define _GNU_SOURCE
+#include <assert.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <linux/types.h>
+#include <sched.h>
+#include <signal.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <syscall.h>
+#include <sys/wait.h>
+
+#include "../kselftest.h"
+#include "../kselftest_harness.h"
+#include "../pidfd/pidfd.h"
+
+/*
+ * Regression test for:
+ * 35f71bc0a09a ("fork: report pid reservation failure properly")
+ * b26ebfe12f34 ("pid: Fix error return value in some cases")
+ */
+TEST(regression_enomem)
+{
+	pid_t pid;
+
+	if (geteuid())
+		EXPECT_EQ(0, unshare(CLONE_NEWUSER));
+
+	EXPECT_EQ(0, unshare(CLONE_NEWPID));
+
+	pid = fork();
+	ASSERT_GE(pid, 0);
+
+	if (pid == 0)
+		exit(EXIT_SUCCESS);
+
+	EXPECT_EQ(0, wait_for_pid(pid));
+
+	pid = fork();
+	ASSERT_LT(pid, 0);
+	ASSERT_EQ(errno, ENOMEM);
+}
+
+TEST_HARNESS_MAIN
diff --git a/tools/testing/selftests/pidfd/.gitignore b/tools/testing/selftests/pidfd/.gitignore
index 39559d7..2d4db5a 100644
--- a/tools/testing/selftests/pidfd/.gitignore
+++ b/tools/testing/selftests/pidfd/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 pidfd_open_test
 pidfd_poll_test
 pidfd_test
diff --git a/tools/testing/selftests/pidfd/pidfd.h b/tools/testing/selftests/pidfd/pidfd.h
index d482515..c1921a5 100644
--- a/tools/testing/selftests/pidfd/pidfd.h
+++ b/tools/testing/selftests/pidfd/pidfd.h
@@ -13,6 +13,8 @@
 #include <string.h>
 #include <syscall.h>
 #include <sys/mount.h>
+#include <sys/types.h>
+#include <sys/wait.h>
 
 #include "../kselftest.h"
 
diff --git a/tools/testing/selftests/powerpc/alignment/.gitignore b/tools/testing/selftests/powerpc/alignment/.gitignore
index 6d4fd01..28bc6ca 100644
--- a/tools/testing/selftests/powerpc/alignment/.gitignore
+++ b/tools/testing/selftests/powerpc/alignment/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 copy_first_unaligned
 alignment_handler
diff --git a/tools/testing/selftests/powerpc/benchmarks/.gitignore b/tools/testing/selftests/powerpc/benchmarks/.gitignore
index 9161679..c9ce139 100644
--- a/tools/testing/selftests/powerpc/benchmarks/.gitignore
+++ b/tools/testing/selftests/powerpc/benchmarks/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 gettimeofday
 context_switch
 fork
diff --git a/tools/testing/selftests/powerpc/benchmarks/Makefile b/tools/testing/selftests/powerpc/benchmarks/Makefile
index d40300a..a32a6ab 100644
--- a/tools/testing/selftests/powerpc/benchmarks/Makefile
+++ b/tools/testing/selftests/powerpc/benchmarks/Makefile
@@ -2,6 +2,8 @@
 TEST_GEN_PROGS := gettimeofday context_switch fork mmap_bench futex_bench null_syscall
 TEST_GEN_FILES := exec_target
 
+TEST_FILES := settings
+
 CFLAGS += -O2
 
 top_srcdir = ../../../../..
diff --git a/tools/testing/selftests/powerpc/benchmarks/settings b/tools/testing/selftests/powerpc/benchmarks/settings
new file mode 100644
index 0000000..e7b9417
--- /dev/null
+++ b/tools/testing/selftests/powerpc/benchmarks/settings
@@ -0,0 +1 @@
+timeout=0
diff --git a/tools/testing/selftests/powerpc/cache_shape/.gitignore b/tools/testing/selftests/powerpc/cache_shape/.gitignore
index ec18484..b385eee 100644
--- a/tools/testing/selftests/powerpc/cache_shape/.gitignore
+++ b/tools/testing/selftests/powerpc/cache_shape/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 cache_shape
diff --git a/tools/testing/selftests/powerpc/copyloops/.gitignore b/tools/testing/selftests/powerpc/copyloops/.gitignore
index 12ef5b0..ddaf140 100644
--- a/tools/testing/selftests/powerpc/copyloops/.gitignore
+++ b/tools/testing/selftests/powerpc/copyloops/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 copyuser_64_t0
 copyuser_64_t1
 copyuser_64_t2
diff --git a/tools/testing/selftests/powerpc/dscr/.gitignore b/tools/testing/selftests/powerpc/dscr/.gitignore
index b585c6c..1d08b15 100644
--- a/tools/testing/selftests/powerpc/dscr/.gitignore
+++ b/tools/testing/selftests/powerpc/dscr/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 dscr_default_test
 dscr_explicit_test
 dscr_inherit_exec_test
diff --git a/tools/testing/selftests/powerpc/dscr/Makefile b/tools/testing/selftests/powerpc/dscr/Makefile
index 5df4763..cfa6eed 100644
--- a/tools/testing/selftests/powerpc/dscr/Makefile
+++ b/tools/testing/selftests/powerpc/dscr/Makefile
@@ -3,6 +3,8 @@
 	      dscr_inherit_test dscr_inherit_exec_test dscr_sysfs_test	\
 	      dscr_sysfs_thread_test
 
+TEST_FILES := settings
+
 top_srcdir = ../../../../..
 include ../../lib.mk
 
diff --git a/tools/testing/selftests/powerpc/dscr/settings b/tools/testing/selftests/powerpc/dscr/settings
new file mode 100644
index 0000000..e7b9417
--- /dev/null
+++ b/tools/testing/selftests/powerpc/dscr/settings
@@ -0,0 +1 @@
+timeout=0
diff --git a/tools/testing/selftests/powerpc/eeh/eeh-basic.sh b/tools/testing/selftests/powerpc/eeh/eeh-basic.sh
index f988d2f..8a8d0f4 100755
--- a/tools/testing/selftests/powerpc/eeh/eeh-basic.sh
+++ b/tools/testing/selftests/powerpc/eeh/eeh-basic.sh
@@ -41,6 +41,11 @@
 		continue;
 	fi
 
+	if [ "ahci" = "$(basename $(realpath /sys/bus/pci/devices/$dev/driver))" ] ; then
+		echo "$dev, Skipped: ahci doesn't support recovery"
+		continue
+	fi
+
 	# Don't inject errosr into an already-frozen PE. This happens with
 	# PEs that contain multiple PCI devices (e.g. multi-function cards)
 	# and injecting new errors during the recovery process will probably
diff --git a/tools/testing/selftests/powerpc/math/.gitignore b/tools/testing/selftests/powerpc/math/.gitignore
index 50ded63..e31ca6f 100644
--- a/tools/testing/selftests/powerpc/math/.gitignore
+++ b/tools/testing/selftests/powerpc/math/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 fpu_syscall
 vmx_syscall
 fpu_preempt
diff --git a/tools/testing/selftests/powerpc/mm/.gitignore b/tools/testing/selftests/powerpc/mm/.gitignore
index 0ebeaea..2ca5232 100644
--- a/tools/testing/selftests/powerpc/mm/.gitignore
+++ b/tools/testing/selftests/powerpc/mm/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 hugetlb_vs_thp_test
 subpage_prot
 tempfile
@@ -6,3 +7,4 @@
 wild_bctr
 large_vm_fork_separation
 bad_accesses
+tlbie_test
diff --git a/tools/testing/selftests/powerpc/pmu/.gitignore b/tools/testing/selftests/powerpc/pmu/.gitignore
index e748f33..ff78969 100644
--- a/tools/testing/selftests/powerpc/pmu/.gitignore
+++ b/tools/testing/selftests/powerpc/pmu/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 count_instructions
 l3_bank_test
 per_event_excludes
diff --git a/tools/testing/selftests/powerpc/pmu/ebb/.gitignore b/tools/testing/selftests/powerpc/pmu/ebb/.gitignore
index 42bddbe..2920fb3 100644
--- a/tools/testing/selftests/powerpc/pmu/ebb/.gitignore
+++ b/tools/testing/selftests/powerpc/pmu/ebb/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 reg_access_test
 event_attributes_test
 cycles_test
diff --git a/tools/testing/selftests/powerpc/pmu/ebb/Makefile b/tools/testing/selftests/powerpc/pmu/ebb/Makefile
index 4173063..ca35dd8 100644
--- a/tools/testing/selftests/powerpc/pmu/ebb/Makefile
+++ b/tools/testing/selftests/powerpc/pmu/ebb/Makefile
@@ -7,6 +7,7 @@
 # The EBB handler is 64-bit code and everything links against it
 CFLAGS += -m64
 
+TMPOUT = $(OUTPUT)/
 # Toolchains may build PIE by default which breaks the assembly
 no-pie-option := $(call try-run, echo 'int main() { return 0; }' | \
         $(CC) -Werror $(KBUILD_CPPFLAGS) $(CC_OPTION_CFLAGS) -no-pie -x c - -o "$$TMP", -no-pie)
diff --git a/tools/testing/selftests/powerpc/primitives/.gitignore b/tools/testing/selftests/powerpc/primitives/.gitignore
index 4cc4e31..1e5c04e 100644
--- a/tools/testing/selftests/powerpc/primitives/.gitignore
+++ b/tools/testing/selftests/powerpc/primitives/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 load_unaligned_zeropad
diff --git a/tools/testing/selftests/powerpc/ptrace/.gitignore b/tools/testing/selftests/powerpc/ptrace/.gitignore
index dce19f2..0e96150 100644
--- a/tools/testing/selftests/powerpc/ptrace/.gitignore
+++ b/tools/testing/selftests/powerpc/ptrace/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 ptrace-gpr
 ptrace-tm-gpr
 ptrace-tm-spd-gpr
diff --git a/tools/testing/selftests/powerpc/security/.gitignore b/tools/testing/selftests/powerpc/security/.gitignore
index 0b969fba..f795e06 100644
--- a/tools/testing/selftests/powerpc/security/.gitignore
+++ b/tools/testing/selftests/powerpc/security/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 rfi_flush
diff --git a/tools/testing/selftests/powerpc/signal/.gitignore b/tools/testing/selftests/powerpc/signal/.gitignore
index dca5852..405b536 100644
--- a/tools/testing/selftests/powerpc/signal/.gitignore
+++ b/tools/testing/selftests/powerpc/signal/.gitignore
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-only
 signal
 signal_tm
 sigfuz
+sigreturn_vdso
diff --git a/tools/testing/selftests/powerpc/signal/Makefile b/tools/testing/selftests/powerpc/signal/Makefile
index 113838f..932a032 100644
--- a/tools/testing/selftests/powerpc/signal/Makefile
+++ b/tools/testing/selftests/powerpc/signal/Makefile
@@ -1,10 +1,12 @@
 # SPDX-License-Identifier: GPL-2.0
-TEST_GEN_PROGS := signal signal_tm sigfuz
+TEST_GEN_PROGS := signal signal_tm sigfuz sigreturn_vdso
 
 CFLAGS += -maltivec
 $(OUTPUT)/signal_tm: CFLAGS += -mhtm
 $(OUTPUT)/sigfuz: CFLAGS += -pthread -m64
 
+TEST_FILES := settings
+
 top_srcdir = ../../../../..
 include ../../lib.mk
 
diff --git a/tools/testing/selftests/powerpc/signal/settings b/tools/testing/selftests/powerpc/signal/settings
new file mode 100644
index 0000000..e7b9417
--- /dev/null
+++ b/tools/testing/selftests/powerpc/signal/settings
@@ -0,0 +1 @@
+timeout=0
diff --git a/tools/testing/selftests/powerpc/signal/sigreturn_vdso.c b/tools/testing/selftests/powerpc/signal/sigreturn_vdso.c
new file mode 100644
index 0000000..e282fff
--- /dev/null
+++ b/tools/testing/selftests/powerpc/signal/sigreturn_vdso.c
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Test that we can take signals with and without the VDSO mapped, which trigger
+ * different paths in the signal handling code.
+ *
+ * See handle_rt_signal64() and setup_trampoline() in signal_64.c
+ */
+
+#define _GNU_SOURCE
+
+#include <errno.h>
+#include <stdio.h>
+#include <signal.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/mman.h>
+#include <sys/types.h>
+#include <unistd.h>
+
+// Ensure assert() is not compiled out
+#undef NDEBUG
+#include <assert.h>
+
+#include "utils.h"
+
+static int search_proc_maps(char *needle, unsigned long *low, unsigned long *high)
+{
+	unsigned long start, end;
+	static char buf[4096];
+	char name[128];
+	FILE *f;
+	int rc = -1;
+
+	f = fopen("/proc/self/maps", "r");
+	if (!f) {
+		perror("fopen");
+		return -1;
+	}
+
+	while (fgets(buf, sizeof(buf), f)) {
+		rc = sscanf(buf, "%lx-%lx %*c%*c%*c%*c %*x %*d:%*d %*d %127s\n",
+			    &start, &end, name);
+		if (rc == 2)
+			continue;
+
+		if (rc != 3) {
+			printf("sscanf errored\n");
+			rc = -1;
+			break;
+		}
+
+		if (strstr(name, needle)) {
+			*low = start;
+			*high = end - 1;
+			rc = 0;
+			break;
+		}
+	}
+
+	fclose(f);
+
+	return rc;
+}
+
+static volatile sig_atomic_t took_signal = 0;
+
+static void sigusr1_handler(int sig)
+{
+	took_signal++;
+}
+
+int test_sigreturn_vdso(void)
+{
+	unsigned long low, high, size;
+	struct sigaction act;
+	char *p;
+
+	act.sa_handler = sigusr1_handler;
+	act.sa_flags = 0;
+	sigemptyset(&act.sa_mask);
+
+	assert(sigaction(SIGUSR1, &act, NULL) == 0);
+
+	// Confirm the VDSO is mapped, and work out where it is
+	assert(search_proc_maps("[vdso]", &low, &high) == 0);
+	size = high - low + 1;
+	printf("VDSO is at 0x%lx-0x%lx (%lu bytes)\n", low, high, size);
+
+	kill(getpid(), SIGUSR1);
+	assert(took_signal == 1);
+	printf("Signal delivered OK with VDSO mapped\n");
+
+	// Remap the VDSO somewhere else
+	p = mmap(NULL, size, PROT_READ|PROT_WRITE, MAP_ANONYMOUS|MAP_PRIVATE, -1, 0);
+	assert(p != MAP_FAILED);
+	assert(mremap((void *)low, size, size, MREMAP_MAYMOVE|MREMAP_FIXED, p) != MAP_FAILED);
+	assert(search_proc_maps("[vdso]", &low, &high) == 0);
+	size = high - low + 1;
+	printf("VDSO moved to 0x%lx-0x%lx (%lu bytes)\n", low, high, size);
+
+	kill(getpid(), SIGUSR1);
+	assert(took_signal == 2);
+	printf("Signal delivered OK with VDSO moved\n");
+
+	assert(munmap((void *)low, size) == 0);
+	printf("Unmapped VDSO\n");
+
+	// Confirm the VDSO is not mapped anymore
+	assert(search_proc_maps("[vdso]", &low, &high) != 0);
+
+	// Make the stack executable
+	assert(search_proc_maps("[stack]", &low, &high) == 0);
+	size = high - low + 1;
+	mprotect((void *)low, size, PROT_READ|PROT_WRITE|PROT_EXEC);
+	printf("Remapped the stack executable\n");
+
+	kill(getpid(), SIGUSR1);
+	assert(took_signal == 3);
+	printf("Signal delivered OK with VDSO unmapped\n");
+
+	return 0;
+}
+
+int main(void)
+{
+	return test_harness(test_sigreturn_vdso, "sigreturn_vdso");
+}
diff --git a/tools/testing/selftests/powerpc/stringloops/.gitignore b/tools/testing/selftests/powerpc/stringloops/.gitignore
index 31a17e0..b0dfc74 100644
--- a/tools/testing/selftests/powerpc/stringloops/.gitignore
+++ b/tools/testing/selftests/powerpc/stringloops/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 memcmp_64
 memcmp_32
 strlen
diff --git a/tools/testing/selftests/powerpc/switch_endian/.gitignore b/tools/testing/selftests/powerpc/switch_endian/.gitignore
index 89e762e..30e962c 100644
--- a/tools/testing/selftests/powerpc/switch_endian/.gitignore
+++ b/tools/testing/selftests/powerpc/switch_endian/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 switch_endian_test
 check-reversed.S
diff --git a/tools/testing/selftests/powerpc/syscalls/.gitignore b/tools/testing/selftests/powerpc/syscalls/.gitignore
index f0f3fcc..b00cab2 100644
--- a/tools/testing/selftests/powerpc/syscalls/.gitignore
+++ b/tools/testing/selftests/powerpc/syscalls/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 ipc_unmuxed
diff --git a/tools/testing/selftests/powerpc/tm/.gitignore b/tools/testing/selftests/powerpc/tm/.gitignore
index 98f2708..d8900a0 100644
--- a/tools/testing/selftests/powerpc/tm/.gitignore
+++ b/tools/testing/selftests/powerpc/tm/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 tm-resched-dscr
 tm-syscall
 tm-signal-msr-resv
@@ -13,6 +14,7 @@
 tm-signal-context-chk-vsx
 tm-signal-context-force-tm
 tm-signal-sigreturn-nt
+tm-signal-pagefault
 tm-vmx-unavail
 tm-unavailable
 tm-trap
diff --git a/tools/testing/selftests/powerpc/tm/Makefile b/tools/testing/selftests/powerpc/tm/Makefile
index b15a1a3..5881e97 100644
--- a/tools/testing/selftests/powerpc/tm/Makefile
+++ b/tools/testing/selftests/powerpc/tm/Makefile
@@ -5,7 +5,9 @@
 TEST_GEN_PROGS := tm-resched-dscr tm-syscall tm-signal-msr-resv tm-signal-stack \
 	tm-vmxcopy tm-fork tm-tar tm-tmspr tm-vmx-unavail tm-unavailable tm-trap \
 	$(SIGNAL_CONTEXT_CHK_TESTS) tm-sigreturn tm-signal-sigreturn-nt \
-	tm-signal-context-force-tm tm-poison
+	tm-signal-context-force-tm tm-poison tm-signal-pagefault
+
+TEST_FILES := settings
 
 top_srcdir = ../../../../..
 include ../../lib.mk
@@ -22,6 +24,8 @@
 $(OUTPUT)/tm-unavailable: CFLAGS += -O0 -pthread -m64 -Wno-error=uninitialized -mvsx
 $(OUTPUT)/tm-trap: CFLAGS += -O0 -pthread -m64
 $(OUTPUT)/tm-signal-context-force-tm: CFLAGS += -pthread -m64
+$(OUTPUT)/tm-signal-pagefault: CFLAGS += -pthread -m64
+$(OUTPUT)/tm-poison: CFLAGS += -m64
 
 SIGNAL_CONTEXT_CHK_TESTS := $(patsubst %,$(OUTPUT)/%,$(SIGNAL_CONTEXT_CHK_TESTS))
 $(SIGNAL_CONTEXT_CHK_TESTS): tm-signal.S
diff --git a/tools/testing/selftests/powerpc/tm/settings b/tools/testing/selftests/powerpc/tm/settings
new file mode 100644
index 0000000..e7b9417
--- /dev/null
+++ b/tools/testing/selftests/powerpc/tm/settings
@@ -0,0 +1 @@
+timeout=0
diff --git a/tools/testing/selftests/powerpc/tm/tm-signal-context-force-tm.c b/tools/testing/selftests/powerpc/tm/tm-signal-context-force-tm.c
index 3171762..421cb08 100644
--- a/tools/testing/selftests/powerpc/tm/tm-signal-context-force-tm.c
+++ b/tools/testing/selftests/powerpc/tm/tm-signal-context-force-tm.c
@@ -42,9 +42,10 @@
 #endif
 
 /* Setting contexts because the test will crash and we want to recover */
-ucontext_t init_context, main_context;
+ucontext_t init_context;
 
-static int count, first_time;
+/* count is changed in the signal handler, so it must be volatile */
+static volatile int count;
 
 void usr_signal_handler(int signo, siginfo_t *si, void *uc)
 {
@@ -98,11 +99,6 @@ void usr_signal_handler(int signo, siginfo_t *si, void *uc)
 
 void seg_signal_handler(int signo, siginfo_t *si, void *uc)
 {
-	if (count == COUNT_MAX) {
-		/* Return to tm_signal_force_msr() and exit */
-		setcontext(&main_context);
-	}
-
 	count++;
 
 	/* Reexecute the test */
@@ -126,37 +122,41 @@ void tm_trap_test(void)
 	 */
 	getcontext(&init_context);
 
-	/* Allocated an alternative signal stack area */
-	ss.ss_sp = mmap(NULL, SIGSTKSZ, PROT_READ | PROT_WRITE,
-			MAP_PRIVATE | MAP_ANONYMOUS, 0, 0);
-	ss.ss_size = SIGSTKSZ;
-	ss.ss_flags = 0;
+	while (count < COUNT_MAX) {
+		/* Allocated an alternative signal stack area */
+		ss.ss_sp = mmap(NULL, SIGSTKSZ, PROT_READ | PROT_WRITE,
+				MAP_PRIVATE | MAP_ANONYMOUS, 0, 0);
+		ss.ss_size = SIGSTKSZ;
+		ss.ss_flags = 0;
 
-	if (ss.ss_sp == (void *)-1) {
-		perror("mmap error\n");
-		exit(-1);
+		if (ss.ss_sp == (void *)-1) {
+			perror("mmap error\n");
+			exit(-1);
+		}
+
+		/* Force the allocation through a page fault */
+		if (madvise(ss.ss_sp, SIGSTKSZ, MADV_DONTNEED)) {
+			perror("madvise\n");
+			exit(-1);
+		}
+
+		/*
+		 * Setting an alternative stack to generate a page fault when
+		 * the signal is raised.
+		 */
+		if (sigaltstack(&ss, NULL)) {
+			perror("sigaltstack\n");
+			exit(-1);
+		}
+
+		/* The signal handler will enable MSR_TS */
+		sigaction(SIGUSR1, &usr_sa, NULL);
+		/* If it does not crash, it might segfault, avoid it to retest */
+		sigaction(SIGSEGV, &seg_sa, NULL);
+
+		raise(SIGUSR1);
+		count++;
 	}
-
-	/* Force the allocation through a page fault */
-	if (madvise(ss.ss_sp, SIGSTKSZ, MADV_DONTNEED)) {
-		perror("madvise\n");
-		exit(-1);
-	}
-
-	/* Setting an alternative stack to generate a page fault when
-	 * the signal is raised.
-	 */
-	if (sigaltstack(&ss, NULL)) {
-		perror("sigaltstack\n");
-		exit(-1);
-	}
-
-	/* The signal handler will enable MSR_TS */
-	sigaction(SIGUSR1, &usr_sa, NULL);
-	/* If it does not crash, it will segfault, avoid it to retest */
-	sigaction(SIGSEGV, &seg_sa, NULL);
-
-	raise(SIGUSR1);
 }
 
 int tm_signal_context_force_tm(void)
@@ -169,11 +169,7 @@ int tm_signal_context_force_tm(void)
 	 */
 	SKIP_IF(!is_ppc64le());
 
-	/* Will get back here after COUNT_MAX interactions */
-	getcontext(&main_context);
-
-	if (!first_time++)
-		tm_trap_test();
+	tm_trap_test();
 
 	return EXIT_SUCCESS;
 }
diff --git a/tools/testing/selftests/powerpc/tm/tm-signal-pagefault.c b/tools/testing/selftests/powerpc/tm/tm-signal-pagefault.c
new file mode 100644
index 0000000..5908bc6a
--- /dev/null
+++ b/tools/testing/selftests/powerpc/tm/tm-signal-pagefault.c
@@ -0,0 +1,284 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020, Gustavo Luiz Duarte, IBM Corp.
+ *
+ * This test starts a transaction and triggers a signal, forcing a pagefault to
+ * happen when the kernel signal handling code touches the user signal stack.
+ *
+ * In order to avoid pre-faulting the signal stack memory and to force the
+ * pagefault to happen precisely in the kernel signal handling code, the
+ * pagefault handling is done in userspace using the userfaultfd facility.
+ *
+ * Further pagefaults are triggered by crafting the signal handler's ucontext
+ * to point to additional memory regions managed by the userfaultfd, so using
+ * the same mechanism used to avoid pre-faulting the signal stack memory.
+ *
+ * On failure (bug is present) kernel crashes or never returns control back to
+ * userspace. If bug is not present, tests completes almost immediately.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <linux/userfaultfd.h>
+#include <poll.h>
+#include <unistd.h>
+#include <sys/ioctl.h>
+#include <sys/syscall.h>
+#include <fcntl.h>
+#include <sys/mman.h>
+#include <pthread.h>
+#include <signal.h>
+#include <errno.h>
+
+#include "tm.h"
+
+
+#define UF_MEM_SIZE 655360	/* 10 x 64k pages */
+
+/* Memory handled by userfaultfd */
+static char *uf_mem;
+static size_t uf_mem_offset = 0;
+
+/*
+ * Data that will be copied into the faulting pages (instead of zero-filled
+ * pages). This is used to make the test more reliable and avoid segfaulting
+ * when we return from the signal handler. Since we are making the signal
+ * handler's ucontext point to newly allocated memory, when that memory is
+ * paged-in it will contain the expected content.
+ */
+static char backing_mem[UF_MEM_SIZE];
+
+static size_t pagesize;
+
+/*
+ * Return a chunk of at least 'size' bytes of memory that will be handled by
+ * userfaultfd. If 'backing_data' is not NULL, its content will be save to
+ * 'backing_mem' and then copied into the faulting pages when the page fault
+ * is handled.
+ */
+void *get_uf_mem(size_t size, void *backing_data)
+{
+	void *ret;
+
+	if (uf_mem_offset + size > UF_MEM_SIZE) {
+		fprintf(stderr, "Requesting more uf_mem than expected!\n");
+		exit(EXIT_FAILURE);
+	}
+
+	ret = &uf_mem[uf_mem_offset];
+
+	/* Save the data that will be copied into the faulting page */
+	if (backing_data != NULL)
+		memcpy(&backing_mem[uf_mem_offset], backing_data, size);
+
+	/* Reserve the requested amount of uf_mem */
+	uf_mem_offset += size;
+	/* Keep uf_mem_offset aligned to the page size (round up) */
+	uf_mem_offset = (uf_mem_offset + pagesize - 1) & ~(pagesize - 1);
+
+	return ret;
+}
+
+void *fault_handler_thread(void *arg)
+{
+	struct uffd_msg msg;	/* Data read from userfaultfd */
+	long uffd;		/* userfaultfd file descriptor */
+	struct uffdio_copy uffdio_copy;
+	struct pollfd pollfd;
+	ssize_t nread, offset;
+
+	uffd = (long) arg;
+
+	for (;;) {
+		pollfd.fd = uffd;
+		pollfd.events = POLLIN;
+		if (poll(&pollfd, 1, -1) == -1) {
+			perror("poll() failed");
+			exit(EXIT_FAILURE);
+		}
+
+		nread = read(uffd, &msg, sizeof(msg));
+		if (nread == 0) {
+			fprintf(stderr, "read(): EOF on userfaultfd\n");
+			exit(EXIT_FAILURE);
+		}
+
+		if (nread == -1) {
+			perror("read() failed");
+			exit(EXIT_FAILURE);
+		}
+
+		/* We expect only one kind of event */
+		if (msg.event != UFFD_EVENT_PAGEFAULT) {
+			fprintf(stderr, "Unexpected event on userfaultfd\n");
+			exit(EXIT_FAILURE);
+		}
+
+		/*
+		 * We need to handle page faults in units of pages(!).
+		 * So, round faulting address down to page boundary.
+		 */
+		uffdio_copy.dst = msg.arg.pagefault.address & ~(pagesize-1);
+
+		offset = (char *) uffdio_copy.dst - uf_mem;
+		uffdio_copy.src = (unsigned long) &backing_mem[offset];
+
+		uffdio_copy.len = pagesize;
+		uffdio_copy.mode = 0;
+		uffdio_copy.copy = 0;
+		if (ioctl(uffd, UFFDIO_COPY, &uffdio_copy) == -1) {
+			perror("ioctl-UFFDIO_COPY failed");
+			exit(EXIT_FAILURE);
+		}
+	}
+}
+
+void setup_uf_mem(void)
+{
+	long uffd;		/* userfaultfd file descriptor */
+	pthread_t thr;
+	struct uffdio_api uffdio_api;
+	struct uffdio_register uffdio_register;
+	int ret;
+
+	pagesize = sysconf(_SC_PAGE_SIZE);
+
+	/* Create and enable userfaultfd object */
+	uffd = syscall(__NR_userfaultfd, O_CLOEXEC | O_NONBLOCK);
+	if (uffd == -1) {
+		perror("userfaultfd() failed");
+		exit(EXIT_FAILURE);
+	}
+	uffdio_api.api = UFFD_API;
+	uffdio_api.features = 0;
+	if (ioctl(uffd, UFFDIO_API, &uffdio_api) == -1) {
+		perror("ioctl-UFFDIO_API failed");
+		exit(EXIT_FAILURE);
+	}
+
+	/*
+	 * Create a private anonymous mapping. The memory will be demand-zero
+	 * paged, that is, not yet allocated. When we actually touch the memory
+	 * the related page will be allocated via the userfaultfd mechanism.
+	 */
+	uf_mem = mmap(NULL, UF_MEM_SIZE, PROT_READ | PROT_WRITE,
+		      MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
+	if (uf_mem == MAP_FAILED) {
+		perror("mmap() failed");
+		exit(EXIT_FAILURE);
+	}
+
+	/*
+	 * Register the memory range of the mapping we've just mapped to be
+	 * handled by the userfaultfd object. In 'mode' we request to track
+	 * missing pages (i.e. pages that have not yet been faulted-in).
+	 */
+	uffdio_register.range.start = (unsigned long) uf_mem;
+	uffdio_register.range.len = UF_MEM_SIZE;
+	uffdio_register.mode = UFFDIO_REGISTER_MODE_MISSING;
+	if (ioctl(uffd, UFFDIO_REGISTER, &uffdio_register) == -1) {
+		perror("ioctl-UFFDIO_REGISTER");
+		exit(EXIT_FAILURE);
+	}
+
+	/* Create a thread that will process the userfaultfd events */
+	ret = pthread_create(&thr, NULL, fault_handler_thread, (void *) uffd);
+	if (ret != 0) {
+		fprintf(stderr, "pthread_create(): Error. Returned %d\n", ret);
+		exit(EXIT_FAILURE);
+	}
+}
+
+/*
+ * Assumption: the signal was delivered while userspace was in transactional or
+ * suspended state, i.e. uc->uc_link != NULL.
+ */
+void signal_handler(int signo, siginfo_t *si, void *uc)
+{
+	ucontext_t *ucp = uc;
+
+	/* Skip 'trap' after returning, otherwise we get a SIGTRAP again */
+	ucp->uc_link->uc_mcontext.regs->nip += 4;
+
+	ucp->uc_mcontext.v_regs =
+		get_uf_mem(sizeof(elf_vrreg_t), ucp->uc_mcontext.v_regs);
+
+	ucp->uc_link->uc_mcontext.v_regs =
+		get_uf_mem(sizeof(elf_vrreg_t), ucp->uc_link->uc_mcontext.v_regs);
+
+	ucp->uc_link = get_uf_mem(sizeof(ucontext_t), ucp->uc_link);
+}
+
+bool have_userfaultfd(void)
+{
+	long rc;
+
+	errno = 0;
+	rc = syscall(__NR_userfaultfd, -1);
+
+	return rc == 0 || errno != ENOSYS;
+}
+
+int tm_signal_pagefault(void)
+{
+	struct sigaction sa;
+	stack_t ss;
+
+	SKIP_IF(!have_htm());
+	SKIP_IF(!have_userfaultfd());
+
+	setup_uf_mem();
+
+	/*
+	 * Set an alternative stack that will generate a page fault when the
+	 * signal is raised. The page fault will be treated via userfaultfd,
+	 * i.e. via fault_handler_thread.
+	 */
+	ss.ss_sp = get_uf_mem(SIGSTKSZ, NULL);
+	ss.ss_size = SIGSTKSZ;
+	ss.ss_flags = 0;
+	if (sigaltstack(&ss, NULL) == -1) {
+		perror("sigaltstack() failed");
+		exit(EXIT_FAILURE);
+	}
+
+	sa.sa_flags = SA_SIGINFO | SA_ONSTACK;
+	sa.sa_sigaction = signal_handler;
+	if (sigaction(SIGTRAP, &sa, NULL) == -1) {
+		perror("sigaction() failed");
+		exit(EXIT_FAILURE);
+	}
+
+	/* Trigger a SIGTRAP in transactional state */
+	asm __volatile__(
+			"tbegin.;"
+			"beq    1f;"
+			"trap;"
+			"1: ;"
+			: : : "memory");
+
+	/* Trigger a SIGTRAP in suspended state */
+	asm __volatile__(
+			"tbegin.;"
+			"beq    1f;"
+			"tsuspend.;"
+			"trap;"
+			"tresume.;"
+			"1: ;"
+			: : : "memory");
+
+	return EXIT_SUCCESS;
+}
+
+int main(int argc, char **argv)
+{
+	/*
+	 * Depending on kernel config, the TM Bad Thing might not result in a
+	 * crash, instead the kernel never returns control back to userspace, so
+	 * set a tight timeout. If the test passes it completes almost
+	 * immediately.
+	 */
+	test_harness_set_timeout(2);
+	return test_harness(tm_signal_pagefault, "tm_signal_pagefault");
+}
diff --git a/tools/testing/selftests/powerpc/vphn/.gitignore b/tools/testing/selftests/powerpc/vphn/.gitignore
index 7c04395..b744aed 100644
--- a/tools/testing/selftests/powerpc/vphn/.gitignore
+++ b/tools/testing/selftests/powerpc/vphn/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 test-vphn
diff --git a/tools/testing/selftests/prctl/.gitignore b/tools/testing/selftests/prctl/.gitignore
index 0b5c274..91af2b6 100644
--- a/tools/testing/selftests/prctl/.gitignore
+++ b/tools/testing/selftests/prctl/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 disable-tsc-ctxt-sw-stress-test
 disable-tsc-on-off-stress-test
 disable-tsc-test
diff --git a/tools/testing/selftests/proc/.gitignore b/tools/testing/selftests/proc/.gitignore
index 66fab4c..4bca5a9 100644
--- a/tools/testing/selftests/proc/.gitignore
+++ b/tools/testing/selftests/proc/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 /fd-001-lookup
 /fd-002-posix-eq
 /fd-003-kthread
diff --git a/tools/testing/selftests/pstore/.gitignore b/tools/testing/selftests/pstore/.gitignore
index 5a4a26e..9938fb4 100644
--- a/tools/testing/selftests/pstore/.gitignore
+++ b/tools/testing/selftests/pstore/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 logs
 *uuid
diff --git a/tools/testing/selftests/ptp/.gitignore b/tools/testing/selftests/ptp/.gitignore
index f562e49..534ca26 100644
--- a/tools/testing/selftests/ptp/.gitignore
+++ b/tools/testing/selftests/ptp/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 testptp
diff --git a/tools/testing/selftests/ptrace/.gitignore b/tools/testing/selftests/ptrace/.gitignore
index cfcc49a..7bebf95 100644
--- a/tools/testing/selftests/ptrace/.gitignore
+++ b/tools/testing/selftests/ptrace/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 get_syscall_info
 peeksiginfo
diff --git a/tools/testing/selftests/rcutorture/.gitignore b/tools/testing/selftests/rcutorture/.gitignore
index ccc2402..f6cbce7 100644
--- a/tools/testing/selftests/rcutorture/.gitignore
+++ b/tools/testing/selftests/rcutorture/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 initrd
 b[0-9]*
 res
diff --git a/tools/testing/selftests/rcutorture/formal/srcu-cbmc/.gitignore b/tools/testing/selftests/rcutorture/formal/srcu-cbmc/.gitignore
index 712a3d4..24e2795 100644
--- a/tools/testing/selftests/rcutorture/formal/srcu-cbmc/.gitignore
+++ b/tools/testing/selftests/rcutorture/formal/srcu-cbmc/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 srcu.c
diff --git a/tools/testing/selftests/rcutorture/formal/srcu-cbmc/include/linux/.gitignore b/tools/testing/selftests/rcutorture/formal/srcu-cbmc/include/linux/.gitignore
index 1d016e6..57d2963 100644
--- a/tools/testing/selftests/rcutorture/formal/srcu-cbmc/include/linux/.gitignore
+++ b/tools/testing/selftests/rcutorture/formal/srcu-cbmc/include/linux/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 srcu.h
diff --git a/tools/testing/selftests/rcutorture/formal/srcu-cbmc/tests/store_buffering/.gitignore b/tools/testing/selftests/rcutorture/formal/srcu-cbmc/tests/store_buffering/.gitignore
index f47cb20..d65462d 100644
--- a/tools/testing/selftests/rcutorture/formal/srcu-cbmc/tests/store_buffering/.gitignore
+++ b/tools/testing/selftests/rcutorture/formal/srcu-cbmc/tests/store_buffering/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 *.out
diff --git a/tools/testing/selftests/rseq/.gitignore b/tools/testing/selftests/rseq/.gitignore
index cc610da..5910888 100644
--- a/tools/testing/selftests/rseq/.gitignore
+++ b/tools/testing/selftests/rseq/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 basic_percpu_ops_test
 basic_test
 basic_rseq_op_test
diff --git a/tools/testing/selftests/rtc/.gitignore b/tools/testing/selftests/rtc/.gitignore
index d0ad44f..fb2d533aa 100644
--- a/tools/testing/selftests/rtc/.gitignore
+++ b/tools/testing/selftests/rtc/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 rtctest
 setdate
diff --git a/tools/testing/selftests/safesetid/.gitignore b/tools/testing/selftests/safesetid/.gitignore
index 9c1a629..25d3db1 100644
--- a/tools/testing/selftests/safesetid/.gitignore
+++ b/tools/testing/selftests/safesetid/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 safesetid-test
diff --git a/tools/testing/selftests/seccomp/.gitignore b/tools/testing/selftests/seccomp/.gitignore
index 5af29d3..dec6785 100644
--- a/tools/testing/selftests/seccomp/.gitignore
+++ b/tools/testing/selftests/seccomp/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 seccomp_bpf
 seccomp_benchmark
diff --git a/tools/testing/selftests/sigaltstack/.gitignore b/tools/testing/selftests/sigaltstack/.gitignore
index 35897b0..50a19a8 100644
--- a/tools/testing/selftests/sigaltstack/.gitignore
+++ b/tools/testing/selftests/sigaltstack/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 sas
diff --git a/tools/testing/selftests/size/.gitignore b/tools/testing/selftests/size/.gitignore
index 189b781..923e18e 100644
--- a/tools/testing/selftests/size/.gitignore
+++ b/tools/testing/selftests/size/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 get_size
diff --git a/tools/testing/selftests/sparc64/drivers/.gitignore b/tools/testing/selftests/sparc64/drivers/.gitignore
index 90e835e..0331f77 100644
--- a/tools/testing/selftests/sparc64/drivers/.gitignore
+++ b/tools/testing/selftests/sparc64/drivers/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 adi-test
diff --git a/tools/testing/selftests/splice/.gitignore b/tools/testing/selftests/splice/.gitignore
index 1e23fef..d5a2da4 100644
--- a/tools/testing/selftests/splice/.gitignore
+++ b/tools/testing/selftests/splice/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 default_file_splice_read
diff --git a/tools/testing/selftests/sync/.gitignore b/tools/testing/selftests/sync/.gitignore
index f5091e7..f115235 100644
--- a/tools/testing/selftests/sync/.gitignore
+++ b/tools/testing/selftests/sync/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 sync_test
diff --git a/tools/testing/selftests/tc-testing/.gitignore b/tools/testing/selftests/tc-testing/.gitignore
index c26d72e..d52f65d 100644
--- a/tools/testing/selftests/tc-testing/.gitignore
+++ b/tools/testing/selftests/tc-testing/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 __pycache__/
 *.pyc
 plugins/
diff --git a/tools/testing/selftests/tc-testing/tdc.py b/tools/testing/selftests/tc-testing/tdc.py
index e566c70..a3e4318 100755
--- a/tools/testing/selftests/tc-testing/tdc.py
+++ b/tools/testing/selftests/tc-testing/tdc.py
@@ -713,9 +713,8 @@
         exit(0)
 
     if args.list:
-        if args.list:
-            list_test_cases(alltests)
-            exit(0)
+        list_test_cases(alltests)
+        exit(0)
 
     if len(alltests):
         req_plugins = pm.get_required_plugins(alltests)
diff --git a/tools/testing/selftests/timens/.gitignore b/tools/testing/selftests/timens/.gitignore
index 789f21e..2e43851 100644
--- a/tools/testing/selftests/timens/.gitignore
+++ b/tools/testing/selftests/timens/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 clock_nanosleep
 exec
 gettime_perf
diff --git a/tools/testing/selftests/timers/.gitignore b/tools/testing/selftests/timers/.gitignore
index 32a9ead..bb5326f 100644
--- a/tools/testing/selftests/timers/.gitignore
+++ b/tools/testing/selftests/timers/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 alarmtimer-suspend
 change_skew
 clocksource-switch
diff --git a/tools/testing/selftests/tmpfs/.gitignore b/tools/testing/selftests/tmpfs/.gitignore
index a96838f..b1afaa9 100644
--- a/tools/testing/selftests/tmpfs/.gitignore
+++ b/tools/testing/selftests/tmpfs/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 /bug-link-o-tmpfile
diff --git a/tools/testing/selftests/vDSO/.gitignore b/tools/testing/selftests/vDSO/.gitignore
index 133bf9e..382cfb3 100644
--- a/tools/testing/selftests/vDSO/.gitignore
+++ b/tools/testing/selftests/vDSO/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 vdso_test
 vdso_standalone_test_x86
diff --git a/tools/testing/selftests/vm/.gitignore b/tools/testing/selftests/vm/.gitignore
index d3bed94..0edb6d9 100644
--- a/tools/testing/selftests/vm/.gitignore
+++ b/tools/testing/selftests/vm/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 hugepage-mmap
 hugepage-shm
 map_hugetlb
diff --git a/tools/testing/selftests/vm/userfaultfd.c b/tools/testing/selftests/vm/userfaultfd.c
index d336277..61e5cfeb 100644
--- a/tools/testing/selftests/vm/userfaultfd.c
+++ b/tools/testing/selftests/vm/userfaultfd.c
@@ -54,6 +54,7 @@
 #include <linux/userfaultfd.h>
 #include <setjmp.h>
 #include <stdbool.h>
+#include <assert.h>
 
 #include "../kselftest.h"
 
@@ -76,6 +77,8 @@ static int test_type;
 #define ALARM_INTERVAL_SECS 10
 static volatile bool test_uffdio_copy_eexist = true;
 static volatile bool test_uffdio_zeropage_eexist = true;
+/* Whether to test uffd write-protection */
+static bool test_uffdio_wp = false;
 
 static bool map_shared;
 static int huge_fd;
@@ -86,6 +89,13 @@ static char *area_src, *area_src_alias, *area_dst, *area_dst_alias;
 static char *zeropage;
 pthread_attr_t attr;
 
+/* Userfaultfd test statistics */
+struct uffd_stats {
+	int cpu;
+	unsigned long missing_faults;
+	unsigned long wp_faults;
+};
+
 /* pthread_mutex_t starts at page offset 0 */
 #define area_mutex(___area, ___nr)					\
 	((pthread_mutex_t *) ((___area) + (___nr)*page_size))
@@ -125,6 +135,37 @@ static void usage(void)
 	exit(1);
 }
 
+static void uffd_stats_reset(struct uffd_stats *uffd_stats,
+			     unsigned long n_cpus)
+{
+	int i;
+
+	for (i = 0; i < n_cpus; i++) {
+		uffd_stats[i].cpu = i;
+		uffd_stats[i].missing_faults = 0;
+		uffd_stats[i].wp_faults = 0;
+	}
+}
+
+static void uffd_stats_report(struct uffd_stats *stats, int n_cpus)
+{
+	int i;
+	unsigned long long miss_total = 0, wp_total = 0;
+
+	for (i = 0; i < n_cpus; i++) {
+		miss_total += stats[i].missing_faults;
+		wp_total += stats[i].wp_faults;
+	}
+
+	printf("userfaults: %llu missing (", miss_total);
+	for (i = 0; i < n_cpus; i++)
+		printf("%lu+", stats[i].missing_faults);
+	printf("\b), %llu wp (", wp_total);
+	for (i = 0; i < n_cpus; i++)
+		printf("%lu+", stats[i].wp_faults);
+	printf("\b)\n");
+}
+
 static int anon_release_pages(char *rel_area)
 {
 	int ret = 0;
@@ -245,10 +286,15 @@ struct uffd_test_ops {
 	void (*alias_mapping)(__u64 *start, size_t len, unsigned long offset);
 };
 
-#define ANON_EXPECTED_IOCTLS		((1 << _UFFDIO_WAKE) | \
+#define SHMEM_EXPECTED_IOCTLS		((1 << _UFFDIO_WAKE) | \
 					 (1 << _UFFDIO_COPY) | \
 					 (1 << _UFFDIO_ZEROPAGE))
 
+#define ANON_EXPECTED_IOCTLS		((1 << _UFFDIO_WAKE) | \
+					 (1 << _UFFDIO_COPY) | \
+					 (1 << _UFFDIO_ZEROPAGE) | \
+					 (1 << _UFFDIO_WRITEPROTECT))
+
 static struct uffd_test_ops anon_uffd_test_ops = {
 	.expected_ioctls = ANON_EXPECTED_IOCTLS,
 	.allocate_area	= anon_allocate_area,
@@ -257,7 +303,7 @@ static struct uffd_test_ops anon_uffd_test_ops = {
 };
 
 static struct uffd_test_ops shmem_uffd_test_ops = {
-	.expected_ioctls = ANON_EXPECTED_IOCTLS,
+	.expected_ioctls = SHMEM_EXPECTED_IOCTLS,
 	.allocate_area	= shmem_allocate_area,
 	.release_pages	= shmem_release_pages,
 	.alias_mapping = noop_alias_mapping,
@@ -281,6 +327,21 @@ static int my_bcmp(char *str1, char *str2, size_t n)
 	return 0;
 }
 
+static void wp_range(int ufd, __u64 start, __u64 len, bool wp)
+{
+	struct uffdio_writeprotect prms = { 0 };
+
+	/* Write protection page faults */
+	prms.range.start = start;
+	prms.range.len = len;
+	/* Undo write-protect, do wakeup after that */
+	prms.mode = wp ? UFFDIO_WRITEPROTECT_MODE_WP : 0;
+
+	if (ioctl(ufd, UFFDIO_WRITEPROTECT, &prms))
+		fprintf(stderr, "clear WP failed for address 0x%Lx\n",
+			start), exit(1);
+}
+
 static void *locking_thread(void *arg)
 {
 	unsigned long cpu = (unsigned long) arg;
@@ -419,7 +480,10 @@ static int __copy_page(int ufd, unsigned long offset, bool retry)
 	uffdio_copy.dst = (unsigned long) area_dst + offset;
 	uffdio_copy.src = (unsigned long) area_src + offset;
 	uffdio_copy.len = page_size;
-	uffdio_copy.mode = 0;
+	if (test_uffdio_wp)
+		uffdio_copy.mode = UFFDIO_COPY_MODE_WP;
+	else
+		uffdio_copy.mode = 0;
 	uffdio_copy.copy = 0;
 	if (ioctl(ufd, UFFDIO_COPY, &uffdio_copy)) {
 		/* real retval in ufdio_copy.copy */
@@ -467,8 +531,8 @@ static int uffd_read_msg(int ufd, struct uffd_msg *msg)
 	return 0;
 }
 
-/* Return 1 if page fault handled by us; otherwise 0 */
-static int uffd_handle_page_fault(struct uffd_msg *msg)
+static void uffd_handle_page_fault(struct uffd_msg *msg,
+				   struct uffd_stats *stats)
 {
 	unsigned long offset;
 
@@ -476,25 +540,32 @@ static int uffd_handle_page_fault(struct uffd_msg *msg)
 		fprintf(stderr, "unexpected msg event %u\n",
 			msg->event), exit(1);
 
-	if (bounces & BOUNCE_VERIFY &&
-	    msg->arg.pagefault.flags & UFFD_PAGEFAULT_FLAG_WRITE)
-		fprintf(stderr, "unexpected write fault\n"), exit(1);
+	if (msg->arg.pagefault.flags & UFFD_PAGEFAULT_FLAG_WP) {
+		wp_range(uffd, msg->arg.pagefault.address, page_size, false);
+		stats->wp_faults++;
+	} else {
+		/* Missing page faults */
+		if (bounces & BOUNCE_VERIFY &&
+		    msg->arg.pagefault.flags & UFFD_PAGEFAULT_FLAG_WRITE)
+			fprintf(stderr, "unexpected write fault\n"), exit(1);
 
-	offset = (char *)(unsigned long)msg->arg.pagefault.address - area_dst;
-	offset &= ~(page_size-1);
+		offset = (char *)(unsigned long)msg->arg.pagefault.address - area_dst;
+		offset &= ~(page_size-1);
 
-	return copy_page(uffd, offset);
+		if (copy_page(uffd, offset))
+			stats->missing_faults++;
+	}
 }
 
 static void *uffd_poll_thread(void *arg)
 {
-	unsigned long cpu = (unsigned long) arg;
+	struct uffd_stats *stats = (struct uffd_stats *)arg;
+	unsigned long cpu = stats->cpu;
 	struct pollfd pollfd[2];
 	struct uffd_msg msg;
 	struct uffdio_register uffd_reg;
 	int ret;
 	char tmp_chr;
-	unsigned long userfaults = 0;
 
 	pollfd[0].fd = uffd;
 	pollfd[0].events = POLLIN;
@@ -524,7 +595,7 @@ static void *uffd_poll_thread(void *arg)
 				msg.event), exit(1);
 			break;
 		case UFFD_EVENT_PAGEFAULT:
-			userfaults += uffd_handle_page_fault(&msg);
+			uffd_handle_page_fault(&msg, stats);
 			break;
 		case UFFD_EVENT_FORK:
 			close(uffd);
@@ -543,50 +614,67 @@ static void *uffd_poll_thread(void *arg)
 			break;
 		}
 	}
-	return (void *)userfaults;
+
+	return NULL;
 }
 
 pthread_mutex_t uffd_read_mutex = PTHREAD_MUTEX_INITIALIZER;
 
 static void *uffd_read_thread(void *arg)
 {
-	unsigned long *this_cpu_userfaults;
+	struct uffd_stats *stats = (struct uffd_stats *)arg;
 	struct uffd_msg msg;
 
-	this_cpu_userfaults = (unsigned long *) arg;
-	*this_cpu_userfaults = 0;
-
 	pthread_mutex_unlock(&uffd_read_mutex);
 	/* from here cancellation is ok */
 
 	for (;;) {
 		if (uffd_read_msg(uffd, &msg))
 			continue;
-		(*this_cpu_userfaults) += uffd_handle_page_fault(&msg);
+		uffd_handle_page_fault(&msg, stats);
 	}
-	return (void *)NULL;
+
+	return NULL;
 }
 
 static void *background_thread(void *arg)
 {
 	unsigned long cpu = (unsigned long) arg;
-	unsigned long page_nr;
+	unsigned long page_nr, start_nr, mid_nr, end_nr;
 
-	for (page_nr = cpu * nr_pages_per_cpu;
-	     page_nr < (cpu+1) * nr_pages_per_cpu;
-	     page_nr++)
+	start_nr = cpu * nr_pages_per_cpu;
+	end_nr = (cpu+1) * nr_pages_per_cpu;
+	mid_nr = (start_nr + end_nr) / 2;
+
+	/* Copy the first half of the pages */
+	for (page_nr = start_nr; page_nr < mid_nr; page_nr++)
+		copy_page_retry(uffd, page_nr * page_size);
+
+	/*
+	 * If we need to test uffd-wp, set it up now.  Then we'll have
+	 * at least the first half of the pages mapped already which
+	 * can be write-protected for testing
+	 */
+	if (test_uffdio_wp)
+		wp_range(uffd, (unsigned long)area_dst + start_nr * page_size,
+			nr_pages_per_cpu * page_size, true);
+
+	/*
+	 * Continue the 2nd half of the page copying, handling write
+	 * protection faults if any
+	 */
+	for (page_nr = mid_nr; page_nr < end_nr; page_nr++)
 		copy_page_retry(uffd, page_nr * page_size);
 
 	return NULL;
 }
 
-static int stress(unsigned long *userfaults)
+static int stress(struct uffd_stats *uffd_stats)
 {
 	unsigned long cpu;
 	pthread_t locking_threads[nr_cpus];
 	pthread_t uffd_threads[nr_cpus];
 	pthread_t background_threads[nr_cpus];
-	void **_userfaults = (void **) userfaults;
 
 	finished = 0;
 	for (cpu = 0; cpu < nr_cpus; cpu++) {
@@ -595,12 +683,13 @@ static int stress(unsigned long *userfaults)
 			return 1;
 		if (bounces & BOUNCE_POLL) {
 			if (pthread_create(&uffd_threads[cpu], &attr,
-					   uffd_poll_thread, (void *)cpu))
+					   uffd_poll_thread,
+					   (void *)&uffd_stats[cpu]))
 				return 1;
 		} else {
 			if (pthread_create(&uffd_threads[cpu], &attr,
 					   uffd_read_thread,
-					   &_userfaults[cpu]))
+					   (void *)&uffd_stats[cpu]))
 				return 1;
 			pthread_mutex_lock(&uffd_read_mutex);
 		}
@@ -637,7 +726,8 @@ static int stress(unsigned long *userfaults)
 				fprintf(stderr, "pipefd write error\n");
 				return 1;
 			}
-			if (pthread_join(uffd_threads[cpu], &_userfaults[cpu]))
+			if (pthread_join(uffd_threads[cpu],
+					 (void *)&uffd_stats[cpu]))
 				return 1;
 		} else {
 			if (pthread_cancel(uffd_threads[cpu]))
@@ -735,17 +825,31 @@ static int faulting_process(int signal_test)
 	}
 
 	for (nr = 0; nr < split_nr_pages; nr++) {
+		int steps = 1;
+		unsigned long offset = nr * page_size;
+
 		if (signal_test) {
 			if (sigsetjmp(*sigbuf, 1) != 0) {
-				if (nr == lastnr) {
+				if (steps == 1 && nr == lastnr) {
 					fprintf(stderr, "Signal repeated\n");
 					return 1;
 				}
 
 				lastnr = nr;
 				if (signal_test == 1) {
-					if (copy_page(uffd, nr * page_size))
-						signalled++;
+					if (steps == 1) {
+						/* This is a MISSING request */
+						steps++;
+						if (copy_page(uffd, offset))
+							signalled++;
+					} else {
+						/* This is a WP request */
+						assert(steps == 2);
+						wp_range(uffd,
+							 (__u64)area_dst +
+							 offset,
+							 page_size, false);
+					}
 				} else {
 					signalled++;
 					continue;
@@ -758,8 +862,13 @@ static int faulting_process(int signal_test)
 			fprintf(stderr,
 				"nr %lu memory corruption %Lu %Lu\n",
 				nr, count,
-				count_verify[nr]), exit(1);
-		}
+				count_verify[nr]);
+	        }
+		/*
+		 * Trigger write protection if there is by writting
+		 * the same value back.
+		 */
+		*area_count(area_dst, nr) = count;
 	}
 
 	if (signal_test)
@@ -781,6 +890,11 @@ static int faulting_process(int signal_test)
 				nr, count,
 				count_verify[nr]), exit(1);
 		}
+		/*
+		 * Trigger write protection if there is by writting
+		 * the same value back.
+		 */
+		*area_count(area_dst, nr) = count;
 	}
 
 	if (uffd_test_ops->release_pages(area_dst))
@@ -884,6 +998,8 @@ static int userfaultfd_zeropage_test(void)
 	uffdio_register.range.start = (unsigned long) area_dst;
 	uffdio_register.range.len = nr_pages * page_size;
 	uffdio_register.mode = UFFDIO_REGISTER_MODE_MISSING;
+	if (test_uffdio_wp)
+		uffdio_register.mode |= UFFDIO_REGISTER_MODE_WP;
 	if (ioctl(uffd, UFFDIO_REGISTER, &uffdio_register))
 		fprintf(stderr, "register failure\n"), exit(1);
 
@@ -908,11 +1024,11 @@ static int userfaultfd_events_test(void)
 {
 	struct uffdio_register uffdio_register;
 	unsigned long expected_ioctls;
-	unsigned long userfaults;
 	pthread_t uffd_mon;
 	int err, features;
 	pid_t pid;
 	char c;
+	struct uffd_stats stats = { 0 };
 
 	printf("testing events (fork, remap, remove): ");
 	fflush(stdout);
@@ -929,6 +1045,8 @@ static int userfaultfd_events_test(void)
 	uffdio_register.range.start = (unsigned long) area_dst;
 	uffdio_register.range.len = nr_pages * page_size;
 	uffdio_register.mode = UFFDIO_REGISTER_MODE_MISSING;
+	if (test_uffdio_wp)
+		uffdio_register.mode |= UFFDIO_REGISTER_MODE_WP;
 	if (ioctl(uffd, UFFDIO_REGISTER, &uffdio_register))
 		fprintf(stderr, "register failure\n"), exit(1);
 
@@ -939,7 +1057,7 @@ static int userfaultfd_events_test(void)
 			"unexpected missing ioctl for anon memory\n"),
 			exit(1);
 
-	if (pthread_create(&uffd_mon, &attr, uffd_poll_thread, NULL))
+	if (pthread_create(&uffd_mon, &attr, uffd_poll_thread, &stats))
 		perror("uffd_poll_thread create"), exit(1);
 
 	pid = fork();
@@ -955,13 +1073,14 @@ static int userfaultfd_events_test(void)
 
 	if (write(pipefd[1], &c, sizeof(c)) != sizeof(c))
 		perror("pipe write"), exit(1);
-	if (pthread_join(uffd_mon, (void **)&userfaults))
+	if (pthread_join(uffd_mon, NULL))
 		return 1;
 
 	close(uffd);
-	printf("userfaults: %ld\n", userfaults);
 
-	return userfaults != nr_pages;
+	uffd_stats_report(&stats, 1);
+
+	return stats.missing_faults != nr_pages;
 }
 
 static int userfaultfd_sig_test(void)
@@ -973,6 +1092,7 @@ static int userfaultfd_sig_test(void)
 	int err, features;
 	pid_t pid;
 	char c;
+	struct uffd_stats stats = { 0 };
 
 	printf("testing signal delivery: ");
 	fflush(stdout);
@@ -988,6 +1108,8 @@ static int userfaultfd_sig_test(void)
 	uffdio_register.range.start = (unsigned long) area_dst;
 	uffdio_register.range.len = nr_pages * page_size;
 	uffdio_register.mode = UFFDIO_REGISTER_MODE_MISSING;
+	if (test_uffdio_wp)
+		uffdio_register.mode |= UFFDIO_REGISTER_MODE_WP;
 	if (ioctl(uffd, UFFDIO_REGISTER, &uffdio_register))
 		fprintf(stderr, "register failure\n"), exit(1);
 
@@ -1004,7 +1126,7 @@ static int userfaultfd_sig_test(void)
 	if (uffd_test_ops->release_pages(area_dst))
 		return 1;
 
-	if (pthread_create(&uffd_mon, &attr, uffd_poll_thread, NULL))
+	if (pthread_create(&uffd_mon, &attr, uffd_poll_thread, &stats))
 		perror("uffd_poll_thread create"), exit(1);
 
 	pid = fork();
@@ -1030,6 +1152,7 @@ static int userfaultfd_sig_test(void)
 	close(uffd);
 	return userfaults != 0;
 }
+
 static int userfaultfd_stress(void)
 {
 	void *area;
@@ -1038,7 +1161,7 @@ static int userfaultfd_stress(void)
 	struct uffdio_register uffdio_register;
 	unsigned long cpu;
 	int err;
-	unsigned long userfaults[nr_cpus];
+	struct uffd_stats uffd_stats[nr_cpus];
 
 	uffd_test_ops->allocate_area((void **)&area_src);
 	if (!area_src)
@@ -1119,6 +1242,8 @@ static int userfaultfd_stress(void)
 		uffdio_register.range.start = (unsigned long) area_dst;
 		uffdio_register.range.len = nr_pages * page_size;
 		uffdio_register.mode = UFFDIO_REGISTER_MODE_MISSING;
+		if (test_uffdio_wp)
+			uffdio_register.mode |= UFFDIO_REGISTER_MODE_WP;
 		if (ioctl(uffd, UFFDIO_REGISTER, &uffdio_register)) {
 			fprintf(stderr, "register failure\n");
 			return 1;
@@ -1167,10 +1292,17 @@ static int userfaultfd_stress(void)
 		if (uffd_test_ops->release_pages(area_dst))
 			return 1;
 
+		uffd_stats_reset(uffd_stats, nr_cpus);
+
 		/* bounce pass */
-		if (stress(userfaults))
+		if (stress(uffd_stats))
 			return 1;
 
+		/* Clear all the write protections if there is any */
+		if (test_uffdio_wp)
+			wp_range(uffd, (unsigned long)area_dst,
+				 nr_pages * page_size, false);
+
 		/* unregister */
 		if (ioctl(uffd, UFFDIO_UNREGISTER, &uffdio_register.range)) {
 			fprintf(stderr, "unregister failure\n");
@@ -1209,10 +1341,7 @@ static int userfaultfd_stress(void)
 		area_src_alias = area_dst_alias;
 		area_dst_alias = tmp_area;
 
-		printf("userfaults:");
-		for (cpu = 0; cpu < nr_cpus; cpu++)
-			printf(" %lu", userfaults[cpu]);
-		printf("\n");
+		uffd_stats_report(uffd_stats, nr_cpus);
 	}
 
 	if (err)
@@ -1252,6 +1381,8 @@ static void set_test_type(const char *type)
 	if (!strcmp(type, "anon")) {
 		test_type = TEST_ANON;
 		uffd_test_ops = &anon_uffd_test_ops;
+		/* Only enable write-protect test for anonymous test */
+		test_uffdio_wp = true;
 	} else if (!strcmp(type, "hugetlb")) {
 		test_type = TEST_HUGETLB;
 		uffd_test_ops = &hugetlb_uffd_test_ops;
diff --git a/tools/testing/selftests/watchdog/.gitignore b/tools/testing/selftests/watchdog/.gitignore
index 5aac515..61d7b89 100644
--- a/tools/testing/selftests/watchdog/.gitignore
+++ b/tools/testing/selftests/watchdog/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 watchdog-test
diff --git a/tools/testing/selftests/wireguard/qemu/.gitignore b/tools/testing/selftests/wireguard/qemu/.gitignore
index 415b542..bfa15e6 100644
--- a/tools/testing/selftests/wireguard/qemu/.gitignore
+++ b/tools/testing/selftests/wireguard/qemu/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 build/
 distfiles/
diff --git a/tools/testing/selftests/x86/.gitignore b/tools/testing/selftests/x86/.gitignore
index 7757f73..022a1f3 100644
--- a/tools/testing/selftests/x86/.gitignore
+++ b/tools/testing/selftests/x86/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 *_32
 *_64
 single_step_syscall
diff --git a/tools/testing/vsock/.gitignore b/tools/testing/vsock/.gitignore
index 7f7a2cc..87ca273 100644
--- a/tools/testing/vsock/.gitignore
+++ b/tools/testing/vsock/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 *.d
 vsock_test
 vsock_diag_test
diff --git a/tools/thermal/tmon/.gitignore b/tools/thermal/tmon/.gitignore
index 06e96be..d9e97a0 100644
--- a/tools/thermal/tmon/.gitignore
+++ b/tools/thermal/tmon/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 /tmon
diff --git a/tools/thermal/tmon/tmon.c b/tools/thermal/tmon/tmon.c
index 83ec6e4..7eb3216 100644
--- a/tools/thermal/tmon/tmon.c
+++ b/tools/thermal/tmon/tmon.c
@@ -46,7 +46,7 @@ static void	start_daemon_mode(void);
 
 pthread_t event_tid;
 pthread_mutex_t input_lock;
-void usage()
+void usage(void)
 {
 	printf("Usage: tmon [OPTION...]\n");
 	printf("  -c, --control         cooling device in control\n");
@@ -62,7 +62,7 @@ void usage()
 	exit(0);
 }
 
-void version()
+void version(void)
 {
 	printf("TMON version %s\n", VERSION);
 	exit(EXIT_SUCCESS);
@@ -70,7 +70,6 @@ void version()
 
 static void tmon_cleanup(void)
 {
-
 	syslog(LOG_INFO, "TMON exit cleanup\n");
 	fflush(stdout);
 	refresh();
@@ -96,7 +95,6 @@ static void tmon_cleanup(void)
 	exit(1);
 }
 
-
 static void tmon_sig_handler(int sig)
 {
 	syslog(LOG_INFO, "TMON caught signal %d\n", sig);
@@ -120,7 +118,6 @@ static void tmon_sig_handler(int sig)
 	tmon_exit = true;
 }
 
-
 static void start_syslog(void)
 {
 	if (debug_on)
@@ -167,7 +164,6 @@ static void prepare_logging(void)
 		return;
 	}
 
-
 	fprintf(tmon_log, "#----------- THERMAL SYSTEM CONFIG -------------\n");
 	for (i = 0; i < ptdata.nr_tz_sensor; i++) {
 		char binding_str[33]; /* size of long + 1 */
@@ -175,7 +171,7 @@ static void prepare_logging(void)
 
 		memset(binding_str, 0, sizeof(binding_str));
 		for (j = 0; j < 32; j++)
-			binding_str[j] = (ptdata.tzi[i].cdev_binding & 1<<j) ?
+			binding_str[j] = (ptdata.tzi[i].cdev_binding & (1 << j)) ?
 				'1' : '0';
 
 		fprintf(tmon_log, "#thermal zone %s%02d cdevs binding: %32s\n",
@@ -187,7 +183,6 @@ static void prepare_logging(void)
 				trip_type_name[ptdata.tzi[i].tp[j].type],
 				ptdata.tzi[i].tp[j].temp);
 		}
-
 	}
 
 	for (i = 0; i <	ptdata.nr_cooling_dev; i++)
@@ -219,7 +214,6 @@ static struct option opts[] = {
 	{ 0, 0, NULL, 0 }
 };
 
-
 int main(int argc, char **argv)
 {
 	int err = 0;
@@ -283,7 +277,7 @@ int main(int argc, char **argv)
 	if (signal(SIGINT, tmon_sig_handler) == SIG_ERR)
 		syslog(LOG_DEBUG, "Cannot handle SIGINT\n");
 	if (signal(SIGTERM, tmon_sig_handler) == SIG_ERR)
-		syslog(LOG_DEBUG, "Cannot handle SIGINT\n");
+		syslog(LOG_DEBUG, "Cannot handle SIGTERM\n");
 
 	if (probe_thermal_sysfs()) {
 		pthread_mutex_destroy(&input_lock);
@@ -328,8 +322,7 @@ int main(int argc, char **argv)
 			show_cooling_device();
 		}
 		time_elapsed += ticktime;
-		controller_handler(trec[0].temp[target_tz_index] / 1000,
-				&yk);
+		controller_handler(trec[0].temp[target_tz_index] / 1000, &yk);
 		trec[0].pid_out_pct = yk;
 		if (!dialogue_on)
 			show_control_w();
@@ -340,14 +333,15 @@ int main(int argc, char **argv)
 	return 0;
 }
 
-static void start_daemon_mode()
+static void start_daemon_mode(void)
 {
 	daemon_mode = 1;
 	/* fork */
 	pid_t	sid, pid = fork();
-	if (pid < 0) {
+
+	if (pid < 0)
 		exit(EXIT_FAILURE);
-	} else if (pid > 0)
+	else if (pid > 0)
 		/* kill parent */
 		exit(EXIT_SUCCESS);
 
@@ -366,11 +360,9 @@ static void start_daemon_mode()
 	if ((chdir("/")) < 0)
 		exit(EXIT_FAILURE);
 
-
 	sleep(10);
 
 	close(STDIN_FILENO);
 	close(STDOUT_FILENO);
 	close(STDERR_FILENO);
-
 }
diff --git a/tools/usb/.gitignore b/tools/usb/.gitignore
index 1b74489..fce1ef5 100644
--- a/tools/usb/.gitignore
+++ b/tools/usb/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 ffs-test
 testusb
diff --git a/tools/usb/usbip/.gitignore b/tools/usb/usbip/.gitignore
index 03b892c..597361a 100644
--- a/tools/usb/usbip/.gitignore
+++ b/tools/usb/usbip/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 Makefile
 Makefile.in
 aclocal.m4
diff --git a/tools/virtio/.gitignore b/tools/virtio/.gitignore
index 1cfbb01..075588c 100644
--- a/tools/virtio/.gitignore
+++ b/tools/virtio/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 *.d
 virtio_test
 vringh_test
diff --git a/tools/virtio/Makefile b/tools/virtio/Makefile
index 8e2a908..f33f32f 100644
--- a/tools/virtio/Makefile
+++ b/tools/virtio/Makefile
@@ -8,7 +8,32 @@
 vpath %.c ../../drivers/virtio ../../drivers/vhost
 mod:
 	${MAKE} -C `pwd`/../.. M=`pwd`/vhost_test V=${V}
-.PHONY: all test mod clean
+
+#oot: build vhost as an out of tree module for a distro kernel
+#no effort is taken to make it actually build or work, but tends to mostly work
+#if the distro kernel is very close to upstream
+#unsupported! this is a development tool only, don't use the
+#resulting modules in production!
+OOT_KSRC=/lib/modules/$$(uname -r)/build
+OOT_VHOST=`pwd`/../../drivers/vhost
+#Everyone depends on vhost
+#Tweak the below to enable more modules
+OOT_CONFIGS=\
+	CONFIG_VHOST=m \
+	CONFIG_VHOST_NET=n \
+	CONFIG_VHOST_SCSI=n \
+	CONFIG_VHOST_VSOCK=n
+OOT_BUILD=KCFLAGS="-I "${OOT_VHOST} ${MAKE} -C ${OOT_KSRC} V=${V}
+oot-build:
+	echo "UNSUPPORTED! Don't use the resulting modules in production!"
+	${OOT_BUILD} M=`pwd`/vhost_test
+	${OOT_BUILD} M=${OOT_VHOST} ${OOT_CONFIGS}
+
+oot-clean: oot-build
+oot: oot-build
+oot-clean: OOT_BUILD+=clean
+
+.PHONY: all test mod clean vhost oot oot-clean oot-build
 clean:
 	${RM} *.o vringh_test virtio_test vhost_test/*.o vhost_test/.*.cmd \
               vhost_test/Module.symvers vhost_test/modules.order *.d
diff --git a/tools/vm/.gitignore b/tools/vm/.gitignore
index 44f095f..79bb92a 100644
--- a/tools/vm/.gitignore
+++ b/tools/vm/.gitignore
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
 slabinfo
 page-types
diff --git a/usr/.gitignore b/usr/.gitignore
index 610de73..935442e 100644
--- a/usr/.gitignore
+++ b/usr/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 gen_init_cpio
 initramfs_data.cpio
 /initramfs_inc_data
diff --git a/usr/include/.gitignore b/usr/include/.gitignore
index a0991ff..d2fab78 100644
--- a/usr/include/.gitignore
+++ b/usr/include/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 *
 !.gitignore
 !Makefile
diff --git a/usr/include/Makefile b/usr/include/Makefile
index a339ef3..b568a95 100644
--- a/usr/include/Makefile
+++ b/usr/include/Makefile
@@ -93,7 +93,7 @@
 
 extra-y := $(patsubst $(obj)/%.h,%.hdrtest, $(shell find $(obj) -name '*.h' 2>/dev/null))
 
-# Include the header to detect missing include guard.
+# Include the header twice to detect missing include guard.
 quiet_cmd_hdrtest = HDRTEST $<
       cmd_hdrtest = \
 		$(CC) $(c_flags) -S -o /dev/null -x c /dev/null \